From c7cb020d0b670428eddd9702dfdc5ff0a48de653 Mon Sep 17 00:00:00 2001 From: "Fujinaka, Todd" Date: Tue, 10 Sep 2013 11:57:17 -0700 Subject: igb: Read flow control for i350 from correct EEPROM section Flow control is defined in the four EEPROM sections but the driver only reads from section 0. Signed-off-by: Todd Fujinaka Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/e1000_mac.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index f0dfd41dd4bd..298f0ed50670 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -712,6 +712,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) static s32 igb_set_default_fc(struct e1000_hw *hw) { s32 ret_val = 0; + u16 lan_offset; u16 nvm_data; /* Read and store word 0x0F of the EEPROM. This word contains bits @@ -722,7 +723,14 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); + if (hw->mac.type == e1000_i350) { + lan_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func); + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG + + lan_offset, 1, &nvm_data); + } else { + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, + 1, &nvm_data); + } if (ret_val) { hw_dbg("NVM Read Error\n"); -- cgit v1.2.3-59-g8ed1b