From dfb6b7c109a7f98d324a759599d1b4616f02c79f Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 23 Sep 2013 04:08:13 +0200 Subject: Revert "rt2x00pci: Use PCI MSIs whenever possible" This reverts commit 9483f40d8d01918b399b4e24d0c1111db0afffeb. Some devices stop to connect with above commit, see: https://bugzilla.kernel.org/show_bug.cgi?id=61621 Since there is no clear benefit of having MSI enabled, just revert change to fix the problem. Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: Stanislaw Gruszka Acked-by: Jakub Kicinski Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 76d95deb274b..dc49e525ae5e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -105,13 +105,11 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct rt2x00_ops *ops) goto exit_release_regions; } - pci_enable_msi(pci_dev); - hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); if (!hw) { rt2x00_probe_err("Failed to allocate hardware\n"); retval = -ENOMEM; - goto exit_disable_msi; + goto exit_release_regions; } pci_set_drvdata(pci_dev, hw); @@ -152,9 +150,6 @@ exit_free_reg: exit_free_device: ieee80211_free_hw(hw); -exit_disable_msi: - pci_disable_msi(pci_dev); - exit_release_regions: pci_release_regions(pci_dev); @@ -179,8 +174,6 @@ void rt2x00pci_remove(struct pci_dev *pci_dev) rt2x00pci_free_reg(rt2x00dev); ieee80211_free_hw(hw); - pci_disable_msi(pci_dev); - /* * Free the PCI device data. */ -- cgit v1.3-14-g43fede From 453b0c3f6910672f79da354077af728d92f95c5b Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 27 Sep 2013 10:55:38 -0700 Subject: mwifiex: fix SDIO interrupt lost issue 601216e "mwifiex: process RX packets in SDIO IRQ thread directly" introduced a command timeout issue which can be reproduced easily on an AM33xx platform using a test application written by Daniel Mack: https://gist.github.com/zonque/6579314 mwifiex_main_process() is called from both the SDIO handler and the workqueue. In case an interrupt occurs right after the int_status check, but before updating the mwifiex_processing flag, this interrupt gets lost, resulting in a command timeout and consequently a card reset. Let main_proc_lock protect both int_status and mwifiex_processing flag. This fixes the interrupt lost issue. Cc: # 3.7+ Reported-by: Sven Neumann Reported-by: Andreas Fenkart Tested-by: Daniel Mack Reviewed-by: Dylan Reid Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Paul Stewart Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index fd778337deee..c2b91f566e05 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -358,10 +358,12 @@ process_start: } } while (true); - if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) + spin_lock_irqsave(&adapter->main_proc_lock, flags); + if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) { + spin_unlock_irqrestore(&adapter->main_proc_lock, flags); goto process_start; + } - spin_lock_irqsave(&adapter->main_proc_lock, flags); adapter->mwifiex_processing = false; spin_unlock_irqrestore(&adapter->main_proc_lock, flags); -- cgit v1.3-14-g43fede From f69727fd78fa761dc49ee3091c432a8c6ab81292 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Sep 2013 13:06:31 +0200 Subject: ath9k: fix powersave response handling for BA session packets When a packet is passed from mac80211 to the driver with the IEEE80211_TX_CTL_PS_RESPONSE flag set, it bypasses the normal driver internal queueing and goes directly to the UAPSD queue. When that happens, packets that are part of a BlockAck session still need to be tracked as such inside the driver, otherwise it will create discrepancies in the receiver BA reorder window, causing traffic stalls. This only happens in AP mode with powersave-enabled clients. This patch fixes the regression introduced in the commit "ath9k: use software queues for un-aggregated data packets" Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 5ac713d2ff5d..dd30452df966 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1969,15 +1969,18 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, struct ath_atx_tid *tid, struct sk_buff *skb) { + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_frame_info *fi = get_frame_info(skb); struct list_head bf_head; - struct ath_buf *bf; - - bf = fi->bf; + struct ath_buf *bf = fi->bf; INIT_LIST_HEAD(&bf_head); list_add_tail(&bf->list, &bf_head); bf->bf_state.bf_type = 0; + if (tid && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)) { + bf->bf_state.bf_type = BUF_AMPDU; + ath_tx_addto_baw(sc, tid, bf); + } bf->bf_next = NULL; bf->bf_lastbf = bf; -- cgit v1.3-14-g43fede From 01ea748cd5bfb88e2d3eaf2ded0f047d37b11484 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Fri, 30 Aug 2013 11:12:05 +0300 Subject: iwlwifi: mvm: Disable uAPSD for D3 image The D3 firmware image doesn't support uAPSD, so disable it. Signed-off-by: Alexander Bondar Reviewed-by: Guy Cohen Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/power.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c index 21407a353a3b..d58e393324ef 100644 --- a/drivers/net/wireless/iwlwifi/mvm/power.c +++ b/drivers/net/wireless/iwlwifi/mvm/power.c @@ -273,7 +273,10 @@ static void iwl_mvm_power_build_cmd(struct iwl_mvm *mvm, if (!mvmvif->queue_params[ac].uapsd) continue; - cmd->flags |= cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK); + if (mvm->cur_ucode != IWL_UCODE_WOWLAN) + cmd->flags |= + cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK); + cmd->uapsd_ac_flags |= BIT(ac); /* QNDP TID - the highest TID with no admission control */ -- cgit v1.3-14-g43fede From f477252051c6cdbd1c8ba299fba8f8b98667ca31 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 24 Jul 2013 14:15:21 +0300 Subject: iwlwifi: pcie: don't reset the TX queue counter A few NICs can get into trouble if we reset the TX queue counters in certain very rare situation. To be on the safe side, simply avoid to reset the TX queue counter. This is relevant for non-AMPDU queues only since on AMPDU we have no choice - we must start the TX queue at the right index. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index f45eb29c2ede..1424335163b9 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -1102,6 +1102,8 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, * non-AGG queue. */ iwl_clear_bits_prph(trans, SCD_AGGR_SEL, BIT(txq_id)); + + ssn = trans_pcie->txq[txq_id].q.read_ptr; } /* Place first TFD at index corresponding to start sequence number. -- cgit v1.3-14-g43fede From b49926629fb5c324bb1ed3960fb0d7905a4a8562 Mon Sep 17 00:00:00 2001 From: Matti Gottlieb Date: Sun, 22 Sep 2013 08:23:23 +0300 Subject: iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC series Add some new PCI IDs to the table for 7000 & 3160 series Cc: stable@vger.kernel.org Signed-off-by: Matti Gottlieb Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/drv.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index dc02cb9792af..349f46636885 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -260,54 +260,86 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { #if IS_ENABLED(CONFIG_IWLMVM) /* 7000 Series */ {IWL_PCI_DEVICE(0x08B1, 0x4070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4072, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4170, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4060, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x406A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4160, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4062, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4162, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4270, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4272, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4260, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x426A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4262, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4470, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4472, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4460, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x446A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4462, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4870, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x486E, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4A70, iwl7260_2ac_cfg_high_temp)}, {IWL_PCI_DEVICE(0x08B1, 0x4A6E, iwl7260_2ac_cfg_high_temp)}, {IWL_PCI_DEVICE(0x08B1, 0x4A6C, iwl7260_2ac_cfg_high_temp)}, + {IWL_PCI_DEVICE(0x08B1, 0x4570, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x4560, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4370, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0x4360, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x5070, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4020, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0x402A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0x4220, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0x4420, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC070, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC072, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC170, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC060, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC06A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC160, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC062, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC162, iwl7260_n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC770, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC760, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC270, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC272, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC260, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC26A, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC262, iwl7260_n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC470, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC472, iwl7260_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC460, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC462, iwl7260_n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC570, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC560, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B2, 0xC370, iwl7260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC360, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC020, iwl7260_2n_cfg)}, + {IWL_PCI_DEVICE(0x08B1, 0xC02A, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B2, 0xC220, iwl7260_2n_cfg)}, {IWL_PCI_DEVICE(0x08B1, 0xC420, iwl7260_2n_cfg)}, /* 3160 Series */ {IWL_PCI_DEVICE(0x08B3, 0x0070, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0072, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0170, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0172, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0060, iwl3160_2n_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0062, iwl3160_n_cfg)}, {IWL_PCI_DEVICE(0x08B4, 0x0270, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x0272, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x0470, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x0472, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B4, 0x0370, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8070, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8072, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8170, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8172, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8060, iwl3160_2n_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8062, iwl3160_n_cfg)}, {IWL_PCI_DEVICE(0x08B4, 0x8270, iwl3160_2ac_cfg)}, {IWL_PCI_DEVICE(0x08B3, 0x8470, iwl3160_2ac_cfg)}, + {IWL_PCI_DEVICE(0x08B3, 0x8570, iwl3160_2ac_cfg)}, #endif /* CONFIG_IWLMVM */ {0} -- cgit v1.3-14-g43fede From 8ca95995e64f5d270889badb3e449dca91106a2b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 Sep 2013 11:37:17 +0300 Subject: iwlwifi: don't WARN on host commands sent when firmware is dead This triggers automatic bug reports and add no valuable information. Print a simple error instead and drop the host command. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-trans.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index dd57a36ecb10..80b47508647c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -601,8 +601,10 @@ static inline int iwl_trans_send_cmd(struct iwl_trans *trans, { int ret; - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); + if (trans->state != IWL_TRANS_FW_ALIVE) { + IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); + return -EIO; + } if (!(cmd->flags & CMD_ASYNC)) lock_map_acquire_read(&trans->sync_cmd_lockdep_map); -- cgit v1.3-14-g43fede From 08a5dd3842f2ac61c6d69661d2d96022df8ae359 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 24 Sep 2013 19:34:26 +0300 Subject: iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 series Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-6000.c | 6 ++++++ drivers/net/wireless/iwlwifi/iwl-config.h | 1 + drivers/net/wireless/iwlwifi/pcie/drv.c | 10 ++++++++++ 3 files changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 30d45e2fc193..8ac305be68f4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -240,6 +240,12 @@ const struct iwl_cfg iwl6035_2agn_cfg = { .ht_params = &iwl6000_ht_params, }; +const struct iwl_cfg iwl6035_2agn_sff_cfg = { + .name = "Intel(R) Centrino(R) Ultimate-N 6235 AGN", + IWL_DEVICE_6035, + .ht_params = &iwl6000_ht_params, +}; + const struct iwl_cfg iwl1030_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", IWL_DEVICE_6030, diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index e4d370bff306..b03c25e14903 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -280,6 +280,7 @@ extern const struct iwl_cfg iwl2000_2bgn_cfg; extern const struct iwl_cfg iwl2000_2bgn_d_cfg; extern const struct iwl_cfg iwl2030_2bgn_cfg; extern const struct iwl_cfg iwl6035_2agn_cfg; +extern const struct iwl_cfg iwl6035_2agn_sff_cfg; extern const struct iwl_cfg iwl105_bgn_cfg; extern const struct iwl_cfg iwl105_bgn_d_cfg; extern const struct iwl_cfg iwl135_bgn_cfg; diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 349f46636885..26108a1a29fa 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -139,13 +139,16 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6x00 Series */ {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422B, 0x1108, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422B, 0x1128, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)}, {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4238, 0x1118, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)}, {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)}, @@ -153,12 +156,16 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1306, iwl6005_2abg_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1307, iwl6005_2bg_cfg)}, + {IWL_PCI_DEVICE(0x0082, 0x1308, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1326, iwl6005_2abg_cfg)}, + {IWL_PCI_DEVICE(0x0082, 0x1328, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6005_2agn_cfg)}, + {IWL_PCI_DEVICE(0x0085, 0x1318, iwl6005_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, 0x1316, iwl6005_2abg_cfg)}, {IWL_PCI_DEVICE(0x0082, 0xC020, iwl6005_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x0085, 0xC220, iwl6005_2agn_sff_cfg)}, + {IWL_PCI_DEVICE(0x0085, 0xC228, iwl6005_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x4820, iwl6005_2agn_d_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1304, iwl6005_2agn_mow1_cfg)},/* low 5GHz active */ {IWL_PCI_DEVICE(0x0082, 0x1305, iwl6005_2agn_mow2_cfg)},/* high 5GHz active */ @@ -240,8 +247,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6x35 Series */ {IWL_PCI_DEVICE(0x088E, 0x4060, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088E, 0x406A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088F, 0x4260, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088F, 0x426A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088E, 0x4460, iwl6035_2agn_cfg)}, + {IWL_PCI_DEVICE(0x088E, 0x446A, iwl6035_2agn_sff_cfg)}, {IWL_PCI_DEVICE(0x088E, 0x4860, iwl6035_2agn_cfg)}, {IWL_PCI_DEVICE(0x088F, 0x5260, iwl6035_2agn_cfg)}, -- cgit v1.3-14-g43fede From 5a3e9f7f8c8768b5f7df81100c684e4cd00a6eb5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 Sep 2013 14:39:02 +0300 Subject: iwlwifi: mvm: call ieee80211_scan_completed when needed When RFKill cuts short a scan, mac80211 cancels the scan. This is done by sending a host command to the firmware, but this command was dropped because of RFKill. Flag this command as "SEND_IN_RFKILL" to make sure it is sent to the firmware. The firmware will send SCAN_COMPLETE_NOTIFICATION which will trigger a call to ieee80211_scan_completed. If the scan cannot be aborted, it is because the firmware already finished the scan but we hadn't notified mac80211 at the time mac80211 decided to cancel the scan. By the time we see the scan could not be aborted, mac80211 has been notified already. This patch fixes situations in which we didn't notify mac80211 upon completion of the scan that was cut short by RFkill. Cc: stable@vger.kernel.org [3.10+] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 9a7ab8495300..621fb71f282a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -394,6 +394,11 @@ static bool iwl_mvm_scan_abort_notif(struct iwl_notif_wait_data *notif_wait, return false; } + /* + * If scan cannot be aborted, it means that we had a + * SCAN_COMPLETE_NOTIFICATION in the pipe and it called + * ieee80211_scan_completed already. + */ IWL_DEBUG_SCAN(mvm, "Scan cannot be aborted, exit now: %d\n", *resp); return true; @@ -417,14 +422,19 @@ void iwl_mvm_cancel_scan(struct iwl_mvm *mvm) SCAN_COMPLETE_NOTIFICATION }; int ret; + if (mvm->scan_status == IWL_MVM_SCAN_NONE) + return; + iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort, scan_abort_notif, ARRAY_SIZE(scan_abort_notif), iwl_mvm_scan_abort_notif, NULL); - ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, CMD_SYNC, 0, NULL); + ret = iwl_mvm_send_cmd_pdu(mvm, SCAN_ABORT_CMD, + CMD_SYNC | CMD_SEND_IN_RFKILL, 0, NULL); if (ret) { IWL_ERR(mvm, "Couldn't send SCAN_ABORT_CMD: %d\n", ret); + /* mac80211's state will be cleaned in the fw_restart flow */ goto out_remove_notif; } -- cgit v1.3-14-g43fede From e727ca82e0e9616ab4844301e6bae60ca7327682 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:06 +0200 Subject: proc connector: fix info leaks Initialize event_data for all possible message types to prevent leaking kernel stack contents to userland (up to 20 bytes). Also set the flags member of the connector message to 0 to prevent leaking two more stack bytes this way. Cc: stable@vger.kernel.org # v2.6.15+ Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 08ae128cce9b..c73fc2b74de2 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -65,6 +65,7 @@ void proc_fork_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -80,6 +81,7 @@ void proc_fork_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ /* If cn_netlink_send() failed, the data is not sent */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -96,6 +98,7 @@ void proc_exec_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -106,6 +109,7 @@ void proc_exec_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -122,6 +126,7 @@ void proc_id_connector(struct task_struct *task, int which_id) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); ev->what = which_id; ev->event_data.id.process_pid = task->pid; ev->event_data.id.process_tgid = task->tgid; @@ -145,6 +150,7 @@ void proc_id_connector(struct task_struct *task, int which_id) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -160,6 +166,7 @@ void proc_sid_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -170,6 +177,7 @@ void proc_sid_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -185,6 +193,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -203,6 +212,7 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -218,6 +228,7 @@ void proc_comm_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -229,6 +240,7 @@ void proc_comm_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -244,6 +256,7 @@ void proc_coredump_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -254,6 +267,7 @@ void proc_coredump_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -269,6 +283,7 @@ void proc_exit_connector(struct task_struct *task) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); get_seq(&msg->seq, &ev->cpu); ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -281,6 +296,7 @@ void proc_exit_connector(struct task_struct *task) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = 0; /* not used */ msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } @@ -304,6 +320,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) msg = (struct cn_msg *)buffer; ev = (struct proc_event *)msg->data; + memset(&ev->event_data, 0, sizeof(ev->event_data)); msg->seq = rcvd_seq; ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); @@ -313,6 +330,7 @@ static void cn_proc_ack(int err, int rcvd_seq, int rcvd_ack) memcpy(&msg->id, &cn_proc_event_id, sizeof(msg->id)); msg->ack = rcvd_ack + 1; msg->len = sizeof(*ev); + msg->flags = 0; /* not used */ cn_netlink_send(msg, CN_IDX_PROC, GFP_KERNEL); } -- cgit v1.3-14-g43fede From 162b2bedc084d2d908a04c93383ba02348b648b0 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:07 +0200 Subject: connector: use nlmsg_len() to check message length The current code tests the length of the whole netlink message to be at least as long to fit a cn_msg. This is wrong as nlmsg_len includes the length of the netlink message header. Use nlmsg_len() instead to fix this "off-by-NLMSG_HDRLEN" size check. Cc: stable@vger.kernel.org # v2.6.14+ Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/connector.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 6ecfa758942c..0daa11e418b1 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -157,17 +157,18 @@ static int cn_call_callback(struct sk_buff *skb) static void cn_rx_skb(struct sk_buff *__skb) { struct nlmsghdr *nlh; - int err; struct sk_buff *skb; + int len, err; skb = skb_get(__skb); if (skb->len >= NLMSG_HDRLEN) { nlh = nlmsg_hdr(skb); + len = nlmsg_len(nlh); - if (nlh->nlmsg_len < sizeof(struct cn_msg) || + if (len < (int)sizeof(struct cn_msg) || skb->len < nlh->nlmsg_len || - nlh->nlmsg_len > CONNECTOR_MAX_MSG_SIZE) { + len > CONNECTOR_MAX_MSG_SIZE) { kfree_skb(skb); return; } -- cgit v1.3-14-g43fede From ac73bf50b709dea4e39635151b861b8a8f52bfbb Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 30 Sep 2013 22:03:08 +0200 Subject: connector: use 'size' everywhere in cn_netlink_send() We calculated the size for the netlink message buffer as size. Use size in the memcpy() call as well instead of recalculating it. Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- drivers/connector/connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 0daa11e418b1..a36749f1e44a 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -109,7 +109,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask) data = nlmsg_data(nlh); - memcpy(data, msg, sizeof(*data) + msg->len); + memcpy(data, msg, size); NETLINK_CB(skb).dst_group = group; -- cgit v1.3-14-g43fede From 8c1c58ec70ce45cd5c7866811e90df131e7a3005 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:15 -0500 Subject: net: calxedaxgmac: fix clearing of old filter addresses In commit 2ee68f621af280 (net: calxedaxgmac: fix various errors in xgmac_set_rx_mode), a fix to clean-up old address entries was added. However, the loop to zero out the entries failed to increment the register address resulting in only 1 entry getting cleared. Fix this to correctly use the loop index. Also, the end of the loop condition was off by 1 and should have been <= rather than <. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 78d6d6b970e1..94358d234e73 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1342,8 +1342,8 @@ static void xgmac_set_rx_mode(struct net_device *dev) } out: - for (i = reg; i < XGMAC_MAX_FILTER_ADDR; i++) - xgmac_set_mac_addr(ioaddr, NULL, reg); + for (i = reg; i <= XGMAC_MAX_FILTER_ADDR; i++) + xgmac_set_mac_addr(ioaddr, NULL, i); for (i = 0; i < XGMAC_NUM_HASH; i++) writel(hash_filter[i], ioaddr + XGMAC_HASH(i)); -- cgit v1.3-14-g43fede From 8a8c3f5bebe2455200cd488aea8546d01645b06b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:16 -0500 Subject: net: calxedaxgmac: add uc and mc filter addresses in promiscuous mode Even in promiscuous mode, we need to add filter addresses for correct operation. This fixes silent failures when using a bridge and adding addresses using the "bridge fdb add" command. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 94358d234e73..35da09b80c7c 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1291,10 +1291,8 @@ static void xgmac_set_rx_mode(struct net_device *dev) netdev_dbg(priv->dev, "# mcasts %d, # unicast %d\n", netdev_mc_count(dev), netdev_uc_count(dev)); - if (dev->flags & IFF_PROMISC) { - writel(XGMAC_FRAME_FILTER_PR, ioaddr + XGMAC_FRAME_FILTER); - return; - } + if (dev->flags & IFF_PROMISC) + value |= XGMAC_FRAME_FILTER_PR; memset(hash_filter, 0, sizeof(hash_filter)); -- cgit v1.3-14-g43fede From 0cf2f380073867e5d0cfb526fdf9bee0e7f8a9c6 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 30 Sep 2013 15:12:17 -0500 Subject: net: calxedaxgmac: determine number of address filters at runtime Highbank and Midway xgmac h/w have different number of MAC address filter registers with 7 and 31, respectively. Highbank has been wrong, so fix it and detect the number of filter registers at run-time. Unfortunately, the version register is the same on both SOCs, so simply test if write to the last filter register will take a value. It always reads as 0 if not. Signed-off-by: Rob Herring Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 35da09b80c7c..48f52882a22b 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -106,7 +106,6 @@ #define XGMAC_DMA_HW_FEATURE 0x00000f58 /* Enabled Hardware Features */ #define XGMAC_ADDR_AE 0x80000000 -#define XGMAC_MAX_FILTER_ADDR 31 /* PMT Control and Status */ #define XGMAC_PMT_POINTER_RESET 0x80000000 @@ -384,6 +383,7 @@ struct xgmac_priv { struct device *device; struct napi_struct napi; + int max_macs; struct xgmac_extra_stats xstats; spinlock_t stats_lock; @@ -1296,7 +1296,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) memset(hash_filter, 0, sizeof(hash_filter)); - if (netdev_uc_count(dev) > XGMAC_MAX_FILTER_ADDR) { + if (netdev_uc_count(dev) > priv->max_macs) { use_hash = true; value |= XGMAC_FRAME_FILTER_HUC | XGMAC_FRAME_FILTER_HPF; } @@ -1319,7 +1319,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) goto out; } - if ((netdev_mc_count(dev) + reg - 1) > XGMAC_MAX_FILTER_ADDR) { + if ((netdev_mc_count(dev) + reg - 1) > priv->max_macs) { use_hash = true; value |= XGMAC_FRAME_FILTER_HMC | XGMAC_FRAME_FILTER_HPF; } else { @@ -1340,7 +1340,7 @@ static void xgmac_set_rx_mode(struct net_device *dev) } out: - for (i = reg; i <= XGMAC_MAX_FILTER_ADDR; i++) + for (i = reg; i <= priv->max_macs; i++) xgmac_set_mac_addr(ioaddr, NULL, i); for (i = 0; i < XGMAC_NUM_HASH; i++) writel(hash_filter[i], ioaddr + XGMAC_HASH(i)); @@ -1759,6 +1759,13 @@ static int xgmac_probe(struct platform_device *pdev) uid = readl(priv->base + XGMAC_VERSION); netdev_info(ndev, "h/w version is 0x%x\n", uid); + /* Figure out how many valid mac address filter registers we have */ + writel(1, priv->base + XGMAC_ADDR_HIGH(31)); + if (readl(priv->base + XGMAC_ADDR_HIGH(31)) == 1) + priv->max_macs = 31; + else + priv->max_macs = 7; + writel(0, priv->base + XGMAC_DMA_INTR_ENA); ndev->irq = platform_get_irq(pdev, 0); if (ndev->irq == -ENXIO) { -- cgit v1.3-14-g43fede From 58e4e1f6cacddb7823c44bcfb272174553f6c645 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 30 Sep 2013 13:29:08 -0700 Subject: igb: Avoid uninitialized advertised variable in eee_set_cur eee_get_cur assumes that the output data is already zeroed. It can read-modify-write the advertised field: if (ipcnfg & E1000_IPCNFG_EEE_100M_AN) 2594 edata->advertised |= ADVERTISED_100baseT_Full; This is ok for the normal ethtool eee_get call, which always zeroes the input data before. But eee_set_cur also calls eee_get_cur and it did not zero the input field. Later on it then compares agsinst the field, which can contain partial stack garbage. Zero the input field in eee_set_cur() too. Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 86d51429a189..151e00cad113 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2655,6 +2655,8 @@ static int igb_set_eee(struct net_device *netdev, (hw->phy.media_type != e1000_media_type_copper)) return -EOPNOTSUPP; + memset(&eee_curr, 0, sizeof(struct ethtool_eee)); + ret_val = igb_get_eee(netdev, &eee_curr); if (ret_val) return ret_val; -- cgit v1.3-14-g43fede From 041b4ddb84989f06ff1df0ca869b950f1ee3cb1c Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:20 +0200 Subject: net: mv643xx_eth: update statistics timer from timer context only Each port driver installs a periodic timer to update port statistics by calling mib_counters_update. As mib_counters_update is also called from non-timer context, we should not reschedule the timer there but rather move it to timer-only context. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 7fb5677451f9..44a87e4469e0 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1131,15 +1131,13 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->rx_discard += rdlp(mp, RX_DISCARD_FRAME_CNT); p->rx_overrun += rdlp(mp, RX_OVERRUN_FRAME_CNT); spin_unlock_bh(&mp->mib_counters_lock); - - mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } static void mib_counters_timer_wrapper(unsigned long _mp) { struct mv643xx_eth_private *mp = (void *)_mp; - mib_counters_update(mp); + mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ); } -- cgit v1.3-14-g43fede From f564412c935111c583b787bcc18157377b208e2e Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:21 +0200 Subject: net: mv643xx_eth: fix orphaned statistics timer crash The periodic statistics timer gets started at port _probe() time, but is stopped on _stop() only. In a modular environment, this can cause the timer to access already deallocated memory, if the module is unloaded without starting the eth device. To fix this, we add the timer right before the port is started, instead of at _probe() time. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 44a87e4469e0..2364707d6a13 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2235,6 +2235,7 @@ static int mv643xx_eth_open(struct net_device *dev) mp->int_mask |= INT_TX_END_0 << i; } + add_timer(&mp->mib_counters_timer); port_start(mp); wrlp(mp, INT_MASK_EXT, INT_EXT_LINK_PHY | INT_EXT_TX); @@ -2914,7 +2915,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev) mp->mib_counters_timer.data = (unsigned long)mp; mp->mib_counters_timer.function = mib_counters_timer_wrapper; mp->mib_counters_timer.expires = jiffies + 30 * HZ; - add_timer(&mp->mib_counters_timer); spin_lock_init(&mp->mib_counters_lock); -- cgit v1.3-14-g43fede From b5d82db83c1d0b327b599508a0830d25cc1f15db Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 2 Oct 2013 12:57:22 +0200 Subject: net: mv643xx_eth: fix missing device_node for port devices DT-based mv643xx_eth probes and creates platform_devices for the port devices on its own. To allow fixups for ports based on the device_node, we need to set .of_node of the corresponding device with the correct node. Signed-off-by: Sebastian Hesselbarth Acked-by: Jason Cooper Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index 2364707d6a13..2c210ec35d59 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -2533,6 +2533,7 @@ static int mv643xx_eth_shared_of_add_port(struct platform_device *pdev, if (!ppdev) return -ENOMEM; ppdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + ppdev->dev.of_node = pnp; ret = platform_device_add_resources(ppdev, &res, 1); if (ret) -- cgit v1.3-14-g43fede From d546a89362dcc35bc1aacf0e8e3b0da5a7d2dc89 Mon Sep 17 00:00:00 2001 From: Jon Cooper Date: Fri, 27 Sep 2013 18:26:30 +0100 Subject: sfc: Add rmb() between reading stats and generation count to ensure consistency Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 9f18ae984f9e..a4fbb383ac63 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -545,6 +545,7 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) rmb(); efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, stats_mask, stats, efx->stats_buffer.addr, false); + rmb(); generation_start = dma_stats[MC_CMD_MAC_GENERATION_START]; if (generation_end != generation_start) return -EAGAIN; -- cgit v1.3-14-g43fede From 87648cc925222f16c3bd119af8ae8e8fb2f3fe1d Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Wed, 25 Sep 2013 17:34:12 +0100 Subject: sfc: Fix internal indices of ethtool stats for EF10 The indices in nic_data->stats need to match the EF10_STAT_whatever enum values. In efx_nic_update_stats, only mask; gaps are removed in efx_ef10_update_stats. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/nic.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index e7dbd2dd202e..9826594c8a48 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -469,8 +469,7 @@ size_t efx_nic_describe_stats(const struct efx_hw_stat_desc *desc, size_t count, * @count: Length of the @desc array * @mask: Bitmask of which elements of @desc are enabled * @stats: Buffer to update with the converted statistics. The length - * of this array must be at least the number of set bits in the - * first @count bits of @mask. + * of this array must be at least @count. * @dma_buf: DMA buffer containing hardware statistics * @accumulate: If set, the converted values will be added rather than * directly stored to the corresponding elements of @stats @@ -503,11 +502,9 @@ void efx_nic_update_stats(const struct efx_hw_stat_desc *desc, size_t count, } if (accumulate) - *stats += val; + stats[index] += val; else - *stats = val; + stats[index] = val; } - - ++stats; } } -- cgit v1.3-14-g43fede From 4bae913bd372aab90fdbd91e7e5fb841a2a0dc15 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Fri, 27 Sep 2013 18:52:49 +0100 Subject: sfc: Refactor EF10 stat mask code to allow for more conditional stats Previously, efx_ef10_stat_mask returned a static const unsigned long[], which meant that each possible mask had to be declared statically with STAT_MASK_BITMAP. Since adding a condition would double the size of the decision tree, we now create the bitmask dynamically. To do this, we have two functions efx_ef10_raw_stat_mask, which returns a u64, and efx_ef10_get_stat_mask, which fills in an unsigned long * argument. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 49 +++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index a4fbb383ac63..c00a5d69c94a 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -498,44 +498,49 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { #define HUNT_40G_EXTRA_STAT_MASK ((1ULL << EF10_STAT_rx_align_error) | \ (1ULL << EF10_STAT_rx_length_error)) -#if BITS_PER_LONG == 64 -#define STAT_MASK_BITMAP(bits) (bits) -#else -#define STAT_MASK_BITMAP(bits) (bits) & 0xffffffff, (bits) >> 32 -#endif - -static const unsigned long *efx_ef10_stat_mask(struct efx_nic *efx) +static u64 efx_ef10_raw_stat_mask(struct efx_nic *efx) { - static const unsigned long hunt_40g_stat_mask[] = { - STAT_MASK_BITMAP(HUNT_COMMON_STAT_MASK | - HUNT_40G_EXTRA_STAT_MASK) - }; - static const unsigned long hunt_10g_only_stat_mask[] = { - STAT_MASK_BITMAP(HUNT_COMMON_STAT_MASK | - HUNT_10G_ONLY_STAT_MASK) - }; + u64 raw_mask = HUNT_COMMON_STAT_MASK; u32 port_caps = efx_mcdi_phy_get_caps(efx); if (port_caps & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) - return hunt_40g_stat_mask; + raw_mask |= HUNT_40G_EXTRA_STAT_MASK; else - return hunt_10g_only_stat_mask; + raw_mask |= HUNT_10G_ONLY_STAT_MASK; + return raw_mask; +} + +static void efx_ef10_get_stat_mask(struct efx_nic *efx, unsigned long *mask) +{ + u64 raw_mask = efx_ef10_raw_stat_mask(efx); + +#if BITS_PER_LONG == 64 + mask[0] = raw_mask; +#else + mask[0] = raw_mask & 0xffffffff; + mask[1] = raw_mask >> 32; +#endif } static size_t efx_ef10_describe_stats(struct efx_nic *efx, u8 *names) { + DECLARE_BITMAP(mask, EF10_STAT_COUNT); + + efx_ef10_get_stat_mask(efx, mask); return efx_nic_describe_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, - efx_ef10_stat_mask(efx), names); + mask, names); } static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) { struct efx_ef10_nic_data *nic_data = efx->nic_data; - const unsigned long *stats_mask = efx_ef10_stat_mask(efx); + DECLARE_BITMAP(mask, EF10_STAT_COUNT); __le64 generation_start, generation_end; u64 *stats = nic_data->stats; __le64 *dma_stats; + efx_ef10_get_stat_mask(efx, mask); + dma_stats = efx->stats_buffer.addr; nic_data = efx->nic_data; @@ -543,7 +548,7 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) if (generation_end == EFX_MC_STATS_GENERATION_INVALID) return 0; rmb(); - efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, stats_mask, + efx_nic_update_stats(efx_ef10_stat_desc, EF10_STAT_COUNT, mask, stats, efx->stats_buffer.addr, false); rmb(); generation_start = dma_stats[MC_CMD_MAC_GENERATION_START]; @@ -564,12 +569,14 @@ static int efx_ef10_try_update_nic_stats(struct efx_nic *efx) static size_t efx_ef10_update_stats(struct efx_nic *efx, u64 *full_stats, struct rtnl_link_stats64 *core_stats) { - const unsigned long *mask = efx_ef10_stat_mask(efx); + DECLARE_BITMAP(mask, EF10_STAT_COUNT); struct efx_ef10_nic_data *nic_data = efx->nic_data; u64 *stats = nic_data->stats; size_t stats_count = 0, index; int retry; + efx_ef10_get_stat_mask(efx, mask); + /* If we're unlucky enough to read statistics during the DMA, wait * up to 10ms for it to finish (typically takes <500us) */ -- cgit v1.3-14-g43fede From 2ca10a75d897c6cd3cfcf87567551d775c9b10bb Mon Sep 17 00:00:00 2001 From: Matthew Slattery Date: Tue, 10 Sep 2013 19:06:27 +0100 Subject: sfc: Add definitions for new stats counters and capability flag Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi_pcol.h | 56 ++++++++++++++++++++++++++++++++++-- 1 file changed, 54 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/mcdi_pcol.h b/drivers/net/ethernet/sfc/mcdi_pcol.h index b5cf62492f8e..e0a63ddb7a6c 100644 --- a/drivers/net/ethernet/sfc/mcdi_pcol.h +++ b/drivers/net/ethernet/sfc/mcdi_pcol.h @@ -2574,8 +2574,58 @@ #define MC_CMD_MAC_RX_LANES01_DISP_ERR 0x39 /* enum */ #define MC_CMD_MAC_RX_LANES23_DISP_ERR 0x3a /* enum */ #define MC_CMD_MAC_RX_MATCH_FAULT 0x3b /* enum */ -#define MC_CMD_GMAC_DMABUF_START 0x40 /* enum */ -#define MC_CMD_GMAC_DMABUF_END 0x5f /* enum */ +/* enum: PM trunc_bb_overflow counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_BB_OVERFLOW 0x3c +/* enum: PM discard_bb_overflow counter. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_BB_OVERFLOW 0x3d +/* enum: PM trunc_vfifo_full counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_VFIFO_FULL 0x3e +/* enum: PM discard_vfifo_full counter. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_VFIFO_FULL 0x3f +/* enum: PM trunc_qbb counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_TRUNC_QBB 0x40 +/* enum: PM discard_qbb counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_QBB 0x41 +/* enum: PM discard_mapping counter. Valid for EF10 with PM_AND_RXDP_COUNTERS + * capability only. + */ +#define MC_CMD_MAC_PM_DISCARD_MAPPING 0x42 +/* enum: RXDP counter: Number of packets dropped due to the queue being + * disabled. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_Q_DISABLED_PKTS 0x43 +/* enum: RXDP counter: Number of packets dropped by the DICPU. Valid for EF10 + * with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_DI_DROPPED_PKTS 0x45 +/* enum: RXDP counter: Number of non-host packets. Valid for EF10 with + * PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_STREAMING_PKTS 0x46 +/* enum: RXDP counter: Number of times an emergency descriptor fetch was + * performed. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_EMERGENCY_FETCH_CONDITIONS 0x47 +/* enum: RXDP counter: Number of times the DPCPU waited for an existing + * descriptor fetch. Valid for EF10 with PM_AND_RXDP_COUNTERS capability only. + */ +#define MC_CMD_MAC_RXDP_EMERGENCY_WAIT_CONDITIONS 0x48 +/* enum: Start of GMAC stats buffer space, for Siena only. */ +#define MC_CMD_GMAC_DMABUF_START 0x40 +/* enum: End of GMAC stats buffer space, for Siena only. */ +#define MC_CMD_GMAC_DMABUF_END 0x5f #define MC_CMD_MAC_GENERATION_END 0x60 /* enum */ #define MC_CMD_MAC_NSTATS 0x61 /* enum */ @@ -5065,6 +5115,8 @@ #define MC_CMD_GET_CAPABILITIES_OUT_RX_BATCHING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_OUT_MCAST_FILTER_CHAINING_LBN 26 #define MC_CMD_GET_CAPABILITIES_OUT_MCAST_FILTER_CHAINING_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_LBN 27 +#define MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_WIDTH 1 /* RxDPCPU firmware id. */ #define MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_OFST 4 #define MC_CMD_GET_CAPABILITIES_OUT_RX_DPCPU_FW_ID_LEN 2 -- cgit v1.3-14-g43fede From 568d7a001bd5612a280e1026cce7e6e2e16b7687 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Wed, 25 Sep 2013 17:32:09 +0100 Subject: sfc: Add PM and RXDP drop counters to ethtool stats Recognise the new Packet Memory and RX Data Path counters. The following counters are added: rx_pm_{trunc,discard}_bb_overflow - burst buffer overflowed. This should not occur if BB correctly configured. rx_pm_{trunc,discard}_vfifo_full - not enough space in packet memory. May indicate RX performance problems. rx_pm_{trunc,discard}_qbb - dropped by 802.1Qbb early discard mechanism. Since Qbb is not supported at present, this should not occur. rx_pm_discard_mapping - 802.1p priority configured to be dropped. This should not occur in normal operation. rx_dp_q_disabled_packets - packet was to be delivered to a queue but queue is disabled. May indicate misconfiguration by the driver. rx_dp_di_dropped_packets - parser-dispatcher indicated that a packet should be dropped. rx_dp_streaming_packets - packet was sent to the RXDP streaming bus, ie. a filter directed the packet to the MCPU. rx_dp_emerg_{fetch,wait} - RX datapath had to wait for descriptors to be loaded. Indicates performance problems but not drops. These are only provided if the MC firmware has the PM_AND_RXDP_COUNTERS capability. Otherwise, mask them out. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/ef10.c | 35 +++++++++++++++++++++++++++++++++++ drivers/net/ethernet/sfc/nic.h | 12 ++++++++++++ 2 files changed, 47 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index c00a5d69c94a..21f9ad6392e9 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -444,6 +444,18 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { EF10_DMA_STAT(rx_align_error, RX_ALIGN_ERROR_PKTS), EF10_DMA_STAT(rx_length_error, RX_LENGTH_ERROR_PKTS), EF10_DMA_STAT(rx_nodesc_drops, RX_NODESC_DROPS), + EF10_DMA_STAT(rx_pm_trunc_bb_overflow, PM_TRUNC_BB_OVERFLOW), + EF10_DMA_STAT(rx_pm_discard_bb_overflow, PM_DISCARD_BB_OVERFLOW), + EF10_DMA_STAT(rx_pm_trunc_vfifo_full, PM_TRUNC_VFIFO_FULL), + EF10_DMA_STAT(rx_pm_discard_vfifo_full, PM_DISCARD_VFIFO_FULL), + EF10_DMA_STAT(rx_pm_trunc_qbb, PM_TRUNC_QBB), + EF10_DMA_STAT(rx_pm_discard_qbb, PM_DISCARD_QBB), + EF10_DMA_STAT(rx_pm_discard_mapping, PM_DISCARD_MAPPING), + EF10_DMA_STAT(rx_dp_q_disabled_packets, RXDP_Q_DISABLED_PKTS), + EF10_DMA_STAT(rx_dp_di_dropped_packets, RXDP_DI_DROPPED_PKTS), + EF10_DMA_STAT(rx_dp_streaming_packets, RXDP_STREAMING_PKTS), + EF10_DMA_STAT(rx_dp_emerg_fetch, RXDP_EMERGENCY_FETCH_CONDITIONS), + EF10_DMA_STAT(rx_dp_emerg_wait, RXDP_EMERGENCY_WAIT_CONDITIONS), }; #define HUNT_COMMON_STAT_MASK ((1ULL << EF10_STAT_tx_bytes) | \ @@ -498,15 +510,38 @@ static const struct efx_hw_stat_desc efx_ef10_stat_desc[EF10_STAT_COUNT] = { #define HUNT_40G_EXTRA_STAT_MASK ((1ULL << EF10_STAT_rx_align_error) | \ (1ULL << EF10_STAT_rx_length_error)) +/* These statistics are only provided if the firmware supports the + * capability PM_AND_RXDP_COUNTERS. + */ +#define HUNT_PM_AND_RXDP_STAT_MASK ( \ + (1ULL << EF10_STAT_rx_pm_trunc_bb_overflow) | \ + (1ULL << EF10_STAT_rx_pm_discard_bb_overflow) | \ + (1ULL << EF10_STAT_rx_pm_trunc_vfifo_full) | \ + (1ULL << EF10_STAT_rx_pm_discard_vfifo_full) | \ + (1ULL << EF10_STAT_rx_pm_trunc_qbb) | \ + (1ULL << EF10_STAT_rx_pm_discard_qbb) | \ + (1ULL << EF10_STAT_rx_pm_discard_mapping) | \ + (1ULL << EF10_STAT_rx_dp_q_disabled_packets) | \ + (1ULL << EF10_STAT_rx_dp_di_dropped_packets) | \ + (1ULL << EF10_STAT_rx_dp_streaming_packets) | \ + (1ULL << EF10_STAT_rx_dp_emerg_fetch) | \ + (1ULL << EF10_STAT_rx_dp_emerg_wait)) + static u64 efx_ef10_raw_stat_mask(struct efx_nic *efx) { u64 raw_mask = HUNT_COMMON_STAT_MASK; u32 port_caps = efx_mcdi_phy_get_caps(efx); + struct efx_ef10_nic_data *nic_data = efx->nic_data; if (port_caps & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) raw_mask |= HUNT_40G_EXTRA_STAT_MASK; else raw_mask |= HUNT_10G_ONLY_STAT_MASK; + + if (nic_data->datapath_caps & + (1 << MC_CMD_GET_CAPABILITIES_OUT_PM_AND_RXDP_COUNTERS_LBN)) + raw_mask |= HUNT_PM_AND_RXDP_STAT_MASK; + return raw_mask; } diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h index fda29d39032f..890bbbe8320e 100644 --- a/drivers/net/ethernet/sfc/nic.h +++ b/drivers/net/ethernet/sfc/nic.h @@ -386,6 +386,18 @@ enum { EF10_STAT_rx_align_error, EF10_STAT_rx_length_error, EF10_STAT_rx_nodesc_drops, + EF10_STAT_rx_pm_trunc_bb_overflow, + EF10_STAT_rx_pm_discard_bb_overflow, + EF10_STAT_rx_pm_trunc_vfifo_full, + EF10_STAT_rx_pm_discard_vfifo_full, + EF10_STAT_rx_pm_trunc_qbb, + EF10_STAT_rx_pm_discard_qbb, + EF10_STAT_rx_pm_discard_mapping, + EF10_STAT_rx_dp_q_disabled_packets, + EF10_STAT_rx_dp_di_dropped_packets, + EF10_STAT_rx_dp_streaming_packets, + EF10_STAT_rx_dp_emerg_fetch, + EF10_STAT_rx_dp_emerg_wait, EF10_STAT_COUNT }; -- cgit v1.3-14-g43fede From ec30326ea773900da210c495e14cfeb532550ba2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 5 Oct 2013 14:09:30 +0200 Subject: ath9k: fix tx queue scheduling after channel changes Otherwise, if queues are full during a scan, tx scheduling does not resume after switching back to the home channel. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e4f65900132d..709301f88dcd 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -208,6 +208,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); unsigned long flags; + int i; if (ath_startrecv(sc) != 0) { ath_err(common, "Unable to restart recv logic\n"); @@ -235,6 +236,15 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) } work: ath_restart_work(sc); + + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (!ATH_TXQ_SETUP(sc, i)) + continue; + + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); + } } ieee80211_wake_queues(sc->hw); @@ -539,21 +549,10 @@ chip_reset: static int ath_reset(struct ath_softc *sc) { - int i, r; + int r; ath9k_ps_wakeup(sc); - r = ath_reset_internal(sc, NULL); - - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (!ATH_TXQ_SETUP(sc, i)) - continue; - - spin_lock_bh(&sc->tx.txq[i].axq_lock); - ath_txq_schedule(sc, &sc->tx.txq[i]); - spin_unlock_bh(&sc->tx.txq[i].axq_lock); - } - ath9k_ps_restore(sc); return r; -- cgit v1.3-14-g43fede From d107babca27f3c08e399616483e4c5f010bd24d3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Sep 2013 11:02:46 +0200 Subject: iwlwifi: pcie: fix merge damage The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/pcie/trans.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index bad95d28d50d..c3f904d422b0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1401,6 +1401,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); + err = pci_enable_device(pdev); + if (err) + goto out_no_pci; + if (!cfg->base_params->pcie_l1_allowed) { /* * W/A - seems to solve weird behavior. We need to remove this @@ -1412,10 +1416,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, PCIE_LINK_STATE_CLKPM); } - err = pci_enable_device(pdev); - if (err) - goto out_no_pci; - pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); -- cgit v1.3-14-g43fede From ecb1c9cc215cb5a4390b714d8b09de637f54fa3f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 7 Oct 2013 20:10:11 +0100 Subject: sfc: Only bind to EF10 functions with the LinkCtrl and Trusted flags Although we do not yet enable multiple PFs per port, it is possible that a board will be reconfigured to enable them while the driver has not yet been updated to fully support this. The most obvious problem is that multiple functions may try to set conflicting link settings. But we will also run into trouble if the firmware doesn't consider us fully trusted. So, abort probing unless both the LinkCtrl and Trusted flags are set for this function. Signed-off-by: Ben Hutchings --- drivers/net/ethernet/sfc/mcdi.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index c082562dbf4e..366c8e3e3784 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -963,7 +963,7 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating, bool *was_attached) { MCDI_DECLARE_BUF(inbuf, MC_CMD_DRV_ATTACH_IN_LEN); - MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_OUT_LEN); + MCDI_DECLARE_BUF(outbuf, MC_CMD_DRV_ATTACH_EXT_OUT_LEN); size_t outlen; int rc; @@ -981,6 +981,22 @@ static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating, goto fail; } + /* We currently assume we have control of the external link + * and are completely trusted by firmware. Abort probing + * if that's not true for this function. + */ + if (driver_operating && + outlen >= MC_CMD_DRV_ATTACH_EXT_OUT_LEN && + (MCDI_DWORD(outbuf, DRV_ATTACH_EXT_OUT_FUNC_FLAGS) & + (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL | + 1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) != + (1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL | + 1 << MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED)) { + netif_err(efx, probe, efx->net_dev, + "This driver version only supports one function per port\n"); + return -ENODEV; + } + if (was_attached != NULL) *was_attached = MCDI_DWORD(outbuf, DRV_ATTACH_OUT_OLD_STATE); return 0; -- cgit v1.3-14-g43fede From f468b10e3de6c5f90a14b9c82f1403a2651cef35 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 4 Oct 2013 14:44:39 +0200 Subject: net: ethernet: cpsw: Search childs for slave nodes The current implementation searches the whole DT for nodes named "slave". This patch changes it to search only child nodes for slaves. Signed-off-by: Markus Pargmann Acked-by: Mugunthan V N Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 79974e31187a..5df50a96a1da 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1782,7 +1782,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, if (ret) pr_warn("Doesn't have any child node\n"); - for_each_node_by_name(slave_node, "slave") { + for_each_child_of_node(node, slave_node) { struct cpsw_slave_data *slave_data = data->slave_data + i; const void *mac_addr = NULL; u32 phyid; @@ -1791,6 +1791,10 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, struct device_node *mdio_node; struct platform_device *mdio; + /* This is no slave child node, continue */ + if (strcmp(slave_node->name, "slave")) + continue; + parp = of_get_property(slave_node, "phy_id", &lenp); if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) { pr_err("Missing slave[%d] phy_id property\n", i); -- cgit v1.3-14-g43fede From 281abd965fedfe7c31927d84e01a5bfa554b5502 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 4 Oct 2013 14:44:40 +0200 Subject: net/ethernet: cpsw: DT read bool dual_emac Signed-off-by: Markus Pargmann Acked-by: Mugunthan V N Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 5df50a96a1da..804846eb5fc2 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1771,8 +1771,8 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } data->mac_control = prop; - if (!of_property_read_u32(node, "dual_emac", &prop)) - data->dual_emac = prop; + if (of_property_read_bool(node, "dual_emac")) + data->dual_emac = 1; /* * Populate all the child nodes here... -- cgit v1.3-14-g43fede From fe119a05f8ca481623a8d02efcc984332e612528 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sat, 5 Oct 2013 21:25:17 +0200 Subject: can: dev: fix nlmsg size calculation in can_get_size() This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f9cba4123c66..1870c4731a57 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -705,14 +705,14 @@ static size_t can_get_size(const struct net_device *dev) size_t size; size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ - size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(struct can_ctrlmode)); /* IFLA_CAN_CTRLMODE */ size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ - size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ - size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + size += nla_total_size(sizeof(struct can_bittiming)); /* IFLA_CAN_BITTIMING */ + size += nla_total_size(sizeof(struct can_clock)); /* IFLA_CAN_CLOCK */ if (priv->do_get_berr_counter) /* IFLA_CAN_BERR_COUNTER */ - size += sizeof(struct can_berr_counter); + size += nla_total_size(sizeof(struct can_berr_counter)); if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ - size += sizeof(struct can_bittiming_const); + size += nla_total_size(sizeof(struct can_bittiming_const)); return size; } -- cgit v1.3-14-g43fede From 9757f1d2e0b4e7ff59e76c2fadbf819e18f3f884 Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:22 -0400 Subject: mrf24j40: Move INIT_COMPLETION() to before packet transmission This avoids a race condition where complete(tx_complete) could be called before tx_complete is initialized. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 42e6deee6db5..66bb4ceaabe8 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -344,6 +344,8 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) if (ret) goto err; + INIT_COMPLETION(devrec->tx_complete); + /* Set TXNTRIG bit of TXNCON to send packet */ ret = read_short_reg(devrec, REG_TXNCON, &val); if (ret) @@ -354,8 +356,6 @@ static int mrf24j40_tx(struct ieee802154_dev *dev, struct sk_buff *skb) val |= 0x4; write_short_reg(devrec, REG_TXNCON, val); - INIT_COMPLETION(devrec->tx_complete); - /* Wait for the device to send the TX complete interrupt. */ ret = wait_for_completion_interruptible_timeout( &devrec->tx_complete, -- cgit v1.3-14-g43fede From 4a4e1da83cc1ff1b8a5171d9b16d4a6c2a6936db Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:23 -0400 Subject: mrf24j40: Use threaded IRQ handler Eliminate all the workqueue and interrupt enable/disable. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index 66bb4ceaabe8..c1bc68836346 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -82,7 +82,6 @@ struct mrf24j40 { struct mutex buffer_mutex; /* only used to protect buf */ struct completion tx_complete; - struct work_struct irqwork; u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */ }; @@ -590,17 +589,6 @@ static struct ieee802154_ops mrf24j40_ops = { static irqreturn_t mrf24j40_isr(int irq, void *data) { struct mrf24j40 *devrec = data; - - disable_irq_nosync(irq); - - schedule_work(&devrec->irqwork); - - return IRQ_HANDLED; -} - -static void mrf24j40_isrwork(struct work_struct *work) -{ - struct mrf24j40 *devrec = container_of(work, struct mrf24j40, irqwork); u8 intstat; int ret; @@ -618,7 +606,7 @@ static void mrf24j40_isrwork(struct work_struct *work) mrf24j40_handle_rx(devrec); out: - enable_irq(devrec->spi->irq); + return IRQ_HANDLED; } static int mrf24j40_probe(struct spi_device *spi) @@ -642,7 +630,6 @@ static int mrf24j40_probe(struct spi_device *spi) mutex_init(&devrec->buffer_mutex); init_completion(&devrec->tx_complete); - INIT_WORK(&devrec->irqwork, mrf24j40_isrwork); devrec->spi = spi; spi_set_drvdata(spi, devrec); @@ -688,11 +675,12 @@ static int mrf24j40_probe(struct spi_device *spi) val &= ~0x3; /* Clear RX mode (normal) */ write_short_reg(devrec, REG_RXMCR, val); - ret = request_irq(spi->irq, - mrf24j40_isr, - IRQF_TRIGGER_FALLING, - dev_name(&spi->dev), - devrec); + ret = request_threaded_irq(spi->irq, + NULL, + mrf24j40_isr, + IRQF_TRIGGER_FALLING|IRQF_ONESHOT, + dev_name(&spi->dev), + devrec); if (ret) { dev_err(printdev(devrec), "Unable to get IRQ"); @@ -721,7 +709,6 @@ static int mrf24j40_remove(struct spi_device *spi) dev_dbg(printdev(devrec), "remove\n"); free_irq(spi->irq, devrec); - flush_work(&devrec->irqwork); /* TODO: Is this the right call? */ ieee802154_unregister_device(devrec->dev); ieee802154_free_device(devrec->dev); /* TODO: Will ieee802154_free_device() wait until ->xmit() is -- cgit v1.3-14-g43fede From 40afbb657352e92726c40cc4ddf3cf0be6800dba Mon Sep 17 00:00:00 2001 From: Alan Ott Date: Sat, 5 Oct 2013 23:52:24 -0400 Subject: mrf24j40: Use level-triggered interrupts The mrf24j40 generates level interrupts. There are rare cases where it appears that the interrupt line never gets de-asserted between interrupts, causing interrupts to be lost, and causing a hung device from the driver's perspective. Switching the driver to interpret these interrupts as level-triggered fixes this issue. Signed-off-by: Alan Ott Signed-off-by: David S. Miller --- drivers/net/ieee802154/mrf24j40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c index c1bc68836346..0632d34905c7 100644 --- a/drivers/net/ieee802154/mrf24j40.c +++ b/drivers/net/ieee802154/mrf24j40.c @@ -678,7 +678,7 @@ static int mrf24j40_probe(struct spi_device *spi) ret = request_threaded_irq(spi->irq, NULL, mrf24j40_isr, - IRQF_TRIGGER_FALLING|IRQF_ONESHOT, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, dev_name(&spi->dev), devrec); -- cgit v1.3-14-g43fede From 5c0c52c9102f90c9d5674fb6c5f4f23e3019dd9f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 6 Oct 2013 21:25:12 +0300 Subject: tun: don't look at current when non-blocking We play with a wait queue even if socket is non blocking. This is an obvious waste. Besides, it will prevent calling the non blocking variant when current is not valid. Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 807815fc9968..7cb105c103fe 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1293,7 +1293,8 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, if (unlikely(!noblock)) add_wait_queue(&tfile->wq.wait, &wait); while (len) { - current->state = TASK_INTERRUPTIBLE; + if (unlikely(!noblock)) + current->state = TASK_INTERRUPTIBLE; /* Read frames from the queue */ if (!(skb = skb_dequeue(&tfile->socket.sk->sk_receive_queue))) { @@ -1320,9 +1321,10 @@ static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, break; } - current->state = TASK_RUNNING; - if (unlikely(!noblock)) + if (unlikely(!noblock)) { + current->state = TASK_RUNNING; remove_wait_queue(&tfile->wq.wait, &wait); + } return ret; } -- cgit v1.3-14-g43fede From 2c6221e4a5aab417cb18bef6f1130d1374240258 Mon Sep 17 00:00:00 2001 From: Nguyen Hong Ky Date: Mon, 7 Oct 2013 15:29:25 +0900 Subject: net: sh_eth: Fix RX packets errors on R8A7740 This patch will fix RX packets errors when receiving big size of data by set bit RNC = 1. RNC - Receive Enable Control 0: Upon completion of reception of one frame, the E-DMAC writes the receive status to the descriptor and clears the RR bit in EDRRR to 0. 1: Upon completion of reception of one frame, the E-DMAC writes (writes back) the receive status to the descriptor. In addition, the E-DMAC reads the next descriptor and prepares for reception of the next frame. In addition, for get more stable when receiving packets, I set maximum size for the transmit/receive FIFO and inserts padding in receive data. Signed-off-by: Nguyen Hong Ky Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 5cd831ebfa83..c7e1b8f333ed 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -620,12 +620,16 @@ static struct sh_eth_cpu_data sh7734_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .fdr_value = 0x0000070f, + .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, -- cgit v1.3-14-g43fede From 70fbe0794393829d9acd686428d87c27b6f6984b Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 7 Oct 2013 13:38:12 +0200 Subject: net/mlx4_en: Rename name of mlx4_en_rx_alloc members Add page prefix to page related members: @size and @offset into @page_size and @page_offset CC: Eric Dumazet Signed-off-by: Amir Vadai Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 40 ++++++++++++++++------------ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 4 +-- 2 files changed, 25 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index dec455c8f627..066fc2747854 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -70,14 +70,15 @@ static int mlx4_alloc_pages(struct mlx4_en_priv *priv, put_page(page); return -ENOMEM; } - page_alloc->size = PAGE_SIZE << order; + page_alloc->page_size = PAGE_SIZE << order; page_alloc->page = page; page_alloc->dma = dma; - page_alloc->offset = frag_info->frag_align; + page_alloc->page_offset = frag_info->frag_align; /* Not doing get_page() for each frag is a big win * on asymetric workloads. */ - atomic_set(&page->_count, page_alloc->size / frag_info->frag_stride); + atomic_set(&page->_count, + page_alloc->page_size / frag_info->frag_stride); return 0; } @@ -96,16 +97,19 @@ static int mlx4_en_alloc_frags(struct mlx4_en_priv *priv, for (i = 0; i < priv->num_frags; i++) { frag_info = &priv->frag_info[i]; page_alloc[i] = ring_alloc[i]; - page_alloc[i].offset += frag_info->frag_stride; - if (page_alloc[i].offset + frag_info->frag_stride <= ring_alloc[i].size) + page_alloc[i].page_offset += frag_info->frag_stride; + + if (page_alloc[i].page_offset + frag_info->frag_stride <= + ring_alloc[i].page_size) continue; + if (mlx4_alloc_pages(priv, &page_alloc[i], frag_info, gfp)) goto out; } for (i = 0; i < priv->num_frags; i++) { frags[i] = ring_alloc[i]; - dma = ring_alloc[i].dma + ring_alloc[i].offset; + dma = ring_alloc[i].dma + ring_alloc[i].page_offset; ring_alloc[i] = page_alloc[i]; rx_desc->data[i].addr = cpu_to_be64(dma); } @@ -117,7 +121,7 @@ out: frag_info = &priv->frag_info[i]; if (page_alloc[i].page != ring_alloc[i].page) { dma_unmap_page(priv->ddev, page_alloc[i].dma, - page_alloc[i].size, PCI_DMA_FROMDEVICE); + page_alloc[i].page_size, PCI_DMA_FROMDEVICE); page = page_alloc[i].page; atomic_set(&page->_count, 1); put_page(page); @@ -132,9 +136,10 @@ static void mlx4_en_free_frag(struct mlx4_en_priv *priv, { const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; - if (frags[i].offset + frag_info->frag_stride > frags[i].size) - dma_unmap_page(priv->ddev, frags[i].dma, frags[i].size, - PCI_DMA_FROMDEVICE); + if (frags[i].page_offset + frag_info->frag_stride > + frags[i].page_size) + dma_unmap_page(priv->ddev, frags[i].dma, frags[i].page_size, + PCI_DMA_FROMDEVICE); if (frags[i].page) put_page(frags[i].page); @@ -161,7 +166,7 @@ out: page_alloc = &ring->page_alloc[i]; dma_unmap_page(priv->ddev, page_alloc->dma, - page_alloc->size, PCI_DMA_FROMDEVICE); + page_alloc->page_size, PCI_DMA_FROMDEVICE); page = page_alloc->page; atomic_set(&page->_count, 1); put_page(page); @@ -184,10 +189,11 @@ static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv, i, page_count(page_alloc->page)); dma_unmap_page(priv->ddev, page_alloc->dma, - page_alloc->size, PCI_DMA_FROMDEVICE); - while (page_alloc->offset + frag_info->frag_stride < page_alloc->size) { + page_alloc->page_size, PCI_DMA_FROMDEVICE); + while (page_alloc->page_offset + frag_info->frag_stride < + page_alloc->page_size) { put_page(page_alloc->page); - page_alloc->offset += frag_info->frag_stride; + page_alloc->page_offset += frag_info->frag_stride; } page_alloc->page = NULL; } @@ -478,7 +484,7 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, /* Save page reference in skb */ __skb_frag_set_page(&skb_frags_rx[nr], frags[nr].page); skb_frag_size_set(&skb_frags_rx[nr], frag_info->frag_size); - skb_frags_rx[nr].page_offset = frags[nr].offset; + skb_frags_rx[nr].page_offset = frags[nr].page_offset; skb->truesize += frag_info->frag_stride; frags[nr].page = NULL; } @@ -517,7 +523,7 @@ static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv, /* Get pointer to first fragment so we could copy the headers into the * (linear part of the) skb */ - va = page_address(frags[0].page) + frags[0].offset; + va = page_address(frags[0].page) + frags[0].page_offset; if (length <= SMALL_PACKET_SIZE) { /* We are copying all relevant data to the skb - temporarily @@ -645,7 +651,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud dma_sync_single_for_cpu(priv->ddev, dma, sizeof(*ethh), DMA_FROM_DEVICE); ethh = (struct ethhdr *)(page_address(frags[0].page) + - frags[0].offset); + frags[0].page_offset); if (is_multicast_ether_addr(ethh->h_dest)) { struct mlx4_mac_entry *entry; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5e0aa569306a..bf06e3610d27 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -237,8 +237,8 @@ struct mlx4_en_tx_desc { struct mlx4_en_rx_alloc { struct page *page; dma_addr_t dma; - u32 offset; - u32 size; + u32 page_offset; + u32 page_size; }; struct mlx4_en_tx_ring { -- cgit v1.3-14-g43fede From 021f1107ffdae7a82af6c53f4c52654062e365c6 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Mon, 7 Oct 2013 13:38:13 +0200 Subject: net/mlx4_en: Fix pages never dma unmapped on rx This patch fixes a bug introduced by commit 51151a16 (mlx4: allow order-0 memory allocations in RX path). dma_unmap_page never reached because condition to detect last fragment in page is wrong. offset+frag_stride can't be greater than size, need to make sure no additional frag will fit in page => compare offset + frag_stride + next_frag_size instead. next_frag_size is the same as the current one, since page is shared only with frags of the same size. CC: Eric Dumazet Signed-off-by: Amir Vadai Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 066fc2747854..afe2efa69c86 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -135,9 +135,10 @@ static void mlx4_en_free_frag(struct mlx4_en_priv *priv, int i) { const struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; + u32 next_frag_end = frags[i].page_offset + 2 * frag_info->frag_stride; - if (frags[i].page_offset + frag_info->frag_stride > - frags[i].page_size) + + if (next_frag_end > frags[i].page_size) dma_unmap_page(priv->ddev, frags[i].dma, frags[i].page_size, PCI_DMA_FROMDEVICE); -- cgit v1.3-14-g43fede From dc62ccaccfb139d9b04bbc5a2688a4402adbfab3 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 7 Oct 2013 13:55:19 +0100 Subject: xen-netback: transition to CLOSED when removing a VIF If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e36c0a70b23b86d2090aeec50155034a9 (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by: David Vrabel Cc: Ian Campbell Cc: Wei Liu Cc: Paul Durrant Acked-by: Wei Liu Reviewed-by: Paul Durrant Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index b45bce20ad76..1b08d8798372 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -39,11 +39,15 @@ static int connect_rings(struct backend_info *); static void connect(struct backend_info *); static void backend_create_xenvif(struct backend_info *be); static void unregister_hotplug_status_watch(struct backend_info *be); +static void set_backend_state(struct backend_info *be, + enum xenbus_state state); static int netback_remove(struct xenbus_device *dev) { struct backend_info *be = dev_get_drvdata(&dev->dev); + set_backend_state(be, XenbusStateClosed); + unregister_hotplug_status_watch(be); if (be->vif) { kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE); -- cgit v1.3-14-g43fede From bdfd6304c8e2439fc047fafccf05f145004260bd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 8 Oct 2013 11:19:19 +0800 Subject: moxa: fix the error handling in moxart_mac_probe() This patch fix the error handling in moxart_mac_probe(): - return -ENOMEM in some memory alloc fail cases - add missing free_netdev() in the error handling case Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index bd1a2d2bc2ae..ea54d95e5b9f 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -448,7 +448,8 @@ static int moxart_mac_probe(struct platform_device *pdev) irq = irq_of_parse_and_map(node, 0); if (irq <= 0) { netdev_err(ndev, "irq_of_parse_and_map failed\n"); - return -EINVAL; + ret = -EINVAL; + goto irq_map_fail; } priv = netdev_priv(ndev); @@ -472,24 +473,32 @@ static int moxart_mac_probe(struct platform_device *pdev) priv->tx_desc_base = dma_alloc_coherent(NULL, TX_REG_DESC_SIZE * TX_DESC_NUM, &priv->tx_base, GFP_DMA | GFP_KERNEL); - if (priv->tx_desc_base == NULL) + if (priv->tx_desc_base == NULL) { + ret = -ENOMEM; goto init_fail; + } priv->rx_desc_base = dma_alloc_coherent(NULL, RX_REG_DESC_SIZE * RX_DESC_NUM, &priv->rx_base, GFP_DMA | GFP_KERNEL); - if (priv->rx_desc_base == NULL) + if (priv->rx_desc_base == NULL) { + ret = -ENOMEM; goto init_fail; + } priv->tx_buf_base = kmalloc(priv->tx_buf_size * TX_DESC_NUM, GFP_ATOMIC); - if (!priv->tx_buf_base) + if (!priv->tx_buf_base) { + ret = -ENOMEM; goto init_fail; + } priv->rx_buf_base = kmalloc(priv->rx_buf_size * RX_DESC_NUM, GFP_ATOMIC); - if (!priv->rx_buf_base) + if (!priv->rx_buf_base) { + ret = -ENOMEM; goto init_fail; + } platform_set_drvdata(pdev, ndev); @@ -522,7 +531,8 @@ static int moxart_mac_probe(struct platform_device *pdev) init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); - +irq_map_fail: + free_netdev(ndev); return ret; } -- cgit v1.3-14-g43fede From 2b1f18a4d6ae8057a93e736a34cdcca925279403 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 8 Oct 2013 11:32:17 +0800 Subject: qlcnic: add missing destroy_workqueue() on error path in qlcnic_probe() Add the missing destroy_workqueue() before return from qlcnic_probe() in the error handling case. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 21d00a0449a1..f07f2b0fefa0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2257,7 +2257,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = qlcnic_alloc_adapter_resources(adapter); if (err) - goto err_out_free_netdev; + goto err_out_free_wq; adapter->dev_rst_time = jiffies; adapter->ahw->revision_id = pdev->revision; @@ -2396,6 +2396,9 @@ err_out_disable_msi: err_out_free_hw: qlcnic_free_adapter_resources(adapter); +err_out_free_wq: + destroy_workqueue(adapter->qlcnic_wq); + err_out_free_netdev: free_netdev(netdev); -- cgit v1.3-14-g43fede From ad3660c242adf34a3f598dd8ba8c8d59811788f3 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:40 +0300 Subject: gianfar: Enable eTSEC-A002 erratum w/a for all parts A002 is still in "no plans to fix" state, and applies to all the current P1/P2 parts as well, so it's resonable to enable its workaround by default, for all the soc's with etsec. The impact of not enabling this workaround for affected parts is that under certain conditons (runt frames or even frames with RX error detected at PHY level) during controller reset, the controller might fail to indicate Rx reset (GRS) completion. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index c4eaadeb572f..db5fc7b16082 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -947,6 +947,9 @@ static void gfar_detect_errata(struct gfar_private *priv) unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ unsigned int rev = svr & 0xffff; + /* no plans to fix */ + priv->errata |= GFAR_ERRATA_A002; + /* MPC8313 Rev 2.0 and higher; All MPC837x */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) @@ -957,11 +960,6 @@ static void gfar_detect_errata(struct gfar_private *priv) (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) priv->errata |= GFAR_ERRATA_76; - /* MPC8313 and MPC837x all rev */ - if ((pvr == 0x80850010 && mod == 0x80b0) || - (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) - priv->errata |= GFAR_ERRATA_A002; - /* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) || (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020)) @@ -1599,7 +1597,7 @@ static int __gfar_is_rx_idle(struct gfar_private *priv) /* Normaly TSEC should not hang on GRS commands, so we should * actually wait for IEVENT_GRSC flag. */ - if (likely(!gfar_has_errata(priv, GFAR_ERRATA_A002))) + if (!gfar_has_errata(priv, GFAR_ERRATA_A002)) return 0; /* Read the eTSEC register at offset 0xD1C. If bits 7-14 are -- cgit v1.3-14-g43fede From 2969b1f7259179b6810b02aa6770c8765d9674ad Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:41 +0300 Subject: gianfar: Use mpc85xx support for errata detection Use the macros and defines from mpc85xx.h to simplify and prevent errors in identifying a mpc85xx based SoC for errata detection. This should help enabling (and identifying) workarounds for various mpc85xx based chips and revisions. For instance, express MPC8548 Rev.2 as: (SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20) instead of: (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020) Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 33 ++++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index db5fc7b16082..329a20626721 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -88,6 +88,7 @@ #include #include +#include #include #include #include @@ -939,17 +940,13 @@ static void gfar_init_filer_table(struct gfar_private *priv) } } -static void gfar_detect_errata(struct gfar_private *priv) +static void __gfar_detect_errata_83xx(struct gfar_private *priv) { - struct device *dev = &priv->ofdev->dev; unsigned int pvr = mfspr(SPRN_PVR); unsigned int svr = mfspr(SPRN_SVR); unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ unsigned int rev = svr & 0xffff; - /* no plans to fix */ - priv->errata |= GFAR_ERRATA_A002; - /* MPC8313 Rev 2.0 and higher; All MPC837x */ if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) @@ -960,10 +957,30 @@ static void gfar_detect_errata(struct gfar_private *priv) (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) priv->errata |= GFAR_ERRATA_76; - /* MPC8313 Rev < 2.0, MPC8548 rev 2.0 */ - if ((pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) || - (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020)) + /* MPC8313 Rev < 2.0 */ + if (pvr == 0x80850010 && mod == 0x80b0 && rev < 0x0020) + priv->errata |= GFAR_ERRATA_12; +} + +static void __gfar_detect_errata_85xx(struct gfar_private *priv) +{ + unsigned int svr = mfspr(SPRN_SVR); + + if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20)) priv->errata |= GFAR_ERRATA_12; +} + +static void gfar_detect_errata(struct gfar_private *priv) +{ + struct device *dev = &priv->ofdev->dev; + + /* no plans to fix */ + priv->errata |= GFAR_ERRATA_A002; + + if (pvr_version_is(PVR_VER_E500V1) || pvr_version_is(PVR_VER_E500V2)) + __gfar_detect_errata_85xx(priv); + else /* non-mpc85xx parts, i.e. e300 core based */ + __gfar_detect_errata_83xx(priv); if (priv->errata) dev_info(dev, "enabled errata workarounds, flags: 0x%x\n", -- cgit v1.3-14-g43fede From 53fad77375ce1005cb62105bf63265966a28bca3 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Wed, 9 Oct 2013 20:20:42 +0300 Subject: gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1 Enable workaround for P2020/P2010 erratum eTSEC 20, "Excess delays when transmitting TOE=1 large frames". The impact is that frames lager than 2500-bytes for which TOE (i.e. TCP/IP hw accelerations like Tx csum) is enabled may see excess delay before start of transmission. This erratum was fixed in Rev 2.0. Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 329a20626721..9fbe4dda7a0e 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -968,6 +968,9 @@ static void __gfar_detect_errata_85xx(struct gfar_private *priv) if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20)) priv->errata |= GFAR_ERRATA_12; + if (((SVR_SOC_VER(svr) == SVR_P2020) && (SVR_REV(svr) < 0x20)) || + ((SVR_SOC_VER(svr) == SVR_P2010) && (SVR_REV(svr) < 0x20))) + priv->errata |= GFAR_ERRATA_76; /* aka eTSEC 20 */ } static void gfar_detect_errata(struct gfar_private *priv) -- cgit v1.3-14-g43fede From d5a7b406c529e4595ce03dc8f6dcf7fa36f106fa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 4 Oct 2013 10:52:36 +0200 Subject: can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and abort pending TX MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: linux-stable Cc: Lothar Waßmann Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 3f21142138b7..f028c5d52e21 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -62,7 +62,7 @@ #define FLEXCAN_MCR_BCC BIT(16) #define FLEXCAN_MCR_LPRIO_EN BIT(13) #define FLEXCAN_MCR_AEN BIT(12) -#define FLEXCAN_MCR_MAXMB(x) ((x) & 0xf) +#define FLEXCAN_MCR_MAXMB(x) ((x) & 0x1f) #define FLEXCAN_MCR_IDAM_A (0 << 8) #define FLEXCAN_MCR_IDAM_B (1 << 8) #define FLEXCAN_MCR_IDAM_C (2 << 8) @@ -735,9 +735,11 @@ static int flexcan_chip_start(struct net_device *dev) * */ reg_mcr = flexcan_read(®s->mcr); + reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS; + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_SRX_DIS | + FLEXCAN_MCR_MAXMB(FLEXCAN_TX_BUF_ID); netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); flexcan_write(reg_mcr, ®s->mcr); @@ -771,6 +773,10 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); + /* Abort any pending TX, mark Mailbox as INACTIVE */ + flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), + ®s->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl); + /* acceptance mask/acceptance code (accept everything) */ flexcan_write(0x0, ®s->rxgmask); flexcan_write(0x0, ®s->rx14mask); -- cgit v1.3-14-g43fede From e358784297992b012e8071764d996191dd2b1a54 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 3 Oct 2013 23:51:55 +0200 Subject: can: flexcan: fix mx28 detection by rearanging OF match table The current implemetation of of_match_device() relies that the of_device_id table in the driver is sorted from most specific to least specific compatible. Without this patch the mx28 is detected as the less specific p1010. This leads to a p1010 specific workaround is activated on the mx28, which is not needed. Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f028c5d52e21..8f5ce747feb5 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -985,9 +985,9 @@ static void unregister_flexcandev(struct net_device *dev) } static const struct of_device_id flexcan_of_match[] = { - { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, - { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, { .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, }, + { .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, }, + { .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, flexcan_of_match); -- cgit v1.3-14-g43fede From 5abbeea553c8260ed4e2ac4aae962aff800b6c6d Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 9 Oct 2013 12:19:19 +0200 Subject: can: at91-can: fix device to driver data mapping for platform devices In commit: 3078cde7 can: at91_can: add dt support device tree support was added to the at91_can driver. In this commit the mapping of device to driver data was mixed up. This results in the sam9x5 parameters being used for the sam9263 and the workaround for the broken mailbox 0 on the sam9263 not being activated. This patch fixes the broken platform_device_id table. Cc: linux-stable Cc: Ludovic Desroches Signed-off-by: Marc Kleine-Budde --- drivers/net/can/at91_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 3b1ff6148702..693d8ffe4653 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -1405,10 +1405,10 @@ static int at91_can_remove(struct platform_device *pdev) static const struct platform_device_id at91_can_id_table[] = { { - .name = "at91_can", + .name = "at91sam9x5_can", .driver_data = (kernel_ulong_t)&at91_at91sam9x5_data, }, { - .name = "at91sam9x5_can", + .name = "at91_can", .driver_data = (kernel_ulong_t)&at91_at91sam9263_data, }, { /* sentinel */ -- cgit v1.3-14-g43fede From 9473ca6e920a3b9ca902753ce52833657f9221cc Mon Sep 17 00:00:00 2001 From: Mark Cave-Ayland Date: Tue, 8 Oct 2013 10:18:20 -0500 Subject: rtlwifi: rtl8192cu: Fix error in pointer arithmetic An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland Signed-off-by: Larry Finger Cc: Stable [2.6.39+] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/trx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 763cf1defab5..5a060e537fbe 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -343,7 +343,8 @@ bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw, (bool)GET_RX_DESC_PAGGR(pdesc)); rx_status->mactime = GET_RX_DESC_TSFL(pdesc); if (phystatus) { - p_drvinfo = (struct rx_fwinfo_92c *)(pdesc + RTL_RX_DESC_SIZE); + p_drvinfo = (struct rx_fwinfo_92c *)(skb->data + + stats->rx_bufshift); rtl92c_translate_rx_signal_stuff(hw, skb, stats, pdesc, p_drvinfo); } -- cgit v1.3-14-g43fede From 4978705d26149a629b9f50ff221caed6f1ae3048 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Wed, 9 Oct 2013 12:15:11 -0400 Subject: wireless: cw1200: acquire hwbus lock around cw1200_irq_handler() call. This fixes "lost interrupt" problems that occurred on SPI-based systems. cw1200_irq_handler() expects the hwbus to be locked, but on the SPI-path, that lock wasn't taken (unlike in the SDIO-path, where the generic SDIO-code takes care of acquiring the lock). Cc: stable@vger.kernel.org Signed-off-by: David Mosberger Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/cw1200_spi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index 899cad34ccd3..755a0c8edfe1 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -237,7 +237,9 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id) struct hwbus_priv *self = dev_id; if (self->core) { + cw1200_spi_lock(self); cw1200_irq_handler(self->core); + cw1200_spi_unlock(self); return IRQ_HANDLED; } else { return IRQ_NONE; -- cgit v1.3-14-g43fede From cc23528db0300d5c8c0b98670a577bf1dc3e0e82 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 10 Oct 2013 14:51:16 +0900 Subject: net: sh_eth: Correct fix for RX packet errors on R8A7740 Nguyen Hong Ky posted a patch to correct RX packet errors on R8A7740 which was applied as 2c6221e4a5aab417 ("net: sh_eth: Fix RX packets errors on R8A7740"). Unfortunately sh_eth.c contains many similar instances of struct sh_eth_cpu_data and the patch was miss-applied, updating sh7734_data instead of r8a7740_data. This patch corrects this problem by. 1. Reverting the change to sh7734_data and; 2. Applying the change to r8a7740_data. Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index c7e1b8f333ed..b57c278d3b46 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -620,16 +620,12 @@ static struct sh_eth_cpu_data sh7734_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, - .fdr_value = 0x0000070f, - .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, - .rpadir = 1, - .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, @@ -692,12 +688,16 @@ static struct sh_eth_cpu_data r8a7740_data = { .eesr_err_check = EESR_TWB1 | EESR_TWB | EESR_TABT | EESR_RABT | EESR_RFE | EESR_RDE | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI, + .fdr_value = 0x0000070f, + .rmcr_value = 0x00000001, .apr = 1, .mpr = 1, .tpauser = 1, .bculr = 1, .hw_swap = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, .no_trimd = 1, .no_ade = 1, .tsu = 1, -- cgit v1.3-14-g43fede From 96b340406724d87e4621284ebac5e059d67b2194 Mon Sep 17 00:00:00 2001 From: Salva Peiró Date: Fri, 11 Oct 2013 12:50:03 +0300 Subject: farsync: fix info leak in ioctl The fst_get_iface() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 3f0c4f268751..bcfff0d62de4 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -1972,6 +1972,7 @@ fst_get_iface(struct fst_card_info *card, struct fst_port_info *port, } i = port->index; + memset(&sync, 0, sizeof(sync)); sync.clock_rate = FST_RDL(card, portConfig[i].lineSpeed); /* Lucky card and linux use same encoding here */ sync.clock_type = FST_RDB(card, portConfig[i].internalClock) == -- cgit v1.3-14-g43fede From e9e4ea74f06635f2ffc1dffe5ef40c854faa0a90 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 11 Oct 2013 14:52:20 +0100 Subject: net: smc91x: dont't use SMC_outw for fixing up halfword-aligned data SMC_outw invokes an endian-aware I/O accessor, which may change the data endianness before writing to the device. This is not suitable for data transfers where the memory buffer is simply a string of bytes that does not require any byte-swapping. This patches fixes the smc91x SMC_PUSH_DATA macro so that it uses the string I/O accessor for outputting the leading or trailing halfwords on halfword-aligned buffers. Cc: Cc: Nicolas Pitre Cc: David S. Miller Signed-off-by: Will Deacon Acked-by: Nicolas Pitre Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 5730fe2445a6..98eedb90cdc3 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -1124,8 +1124,7 @@ static const char * chip_ids[ 16 ] = { void __iomem *__ioaddr = ioaddr; \ if (__len >= 2 && (unsigned long)__ptr & 2) { \ __len -= 2; \ - SMC_outw(*(u16 *)__ptr, ioaddr, \ - DATA_REG(lp)); \ + SMC_outsw(ioaddr, DATA_REG(lp), __ptr, 1); \ __ptr += 2; \ } \ if (SMC_CAN_USE_DATACS && lp->datacs) \ @@ -1133,8 +1132,7 @@ static const char * chip_ids[ 16 ] = { SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \ if (__len & 2) { \ __ptr += (__len & ~3); \ - SMC_outw(*((u16 *)__ptr), ioaddr, \ - DATA_REG(lp)); \ + SMC_outsw(ioaddr, DATA_REG(lp), __ptr, 1); \ } \ } else if (SMC_16BIT(lp)) \ SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \ -- cgit v1.3-14-g43fede From e8041ceeded8a0f68cc0c75faf911e4369bba89f Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 11 Oct 2013 18:31:31 -0700 Subject: mwifiex: inform cfg80211 about disconnect if device is removed If device is surprise removed, commands sent to FW including deauthenticate command fail as bus writes fail. We update our media_connected status to false and inform cfg80211 about disconnection only when command is successful. Since cfg80211 assumes device is still connected, it results into following WARN_ON during unload: WARNING: CPU: 0 PID: 18245 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x175/0x4d0 [cfg80211]() Avoid this by emitting cfg80211_disconnected event even if the deauthenticate command fails. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/join.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 9d7c0e6c4fc7..37f873bb342f 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -1422,13 +1422,19 @@ static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, u8 *mac) */ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) { + int ret = 0; + if (!priv->media_connected) return 0; switch (priv->bss_mode) { case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_P2P_CLIENT: - return mwifiex_deauthenticate_infra(priv, mac); + ret = mwifiex_deauthenticate_infra(priv, mac); + if (ret) + cfg80211_disconnected(priv->netdev, 0, NULL, 0, + GFP_KERNEL); + break; case NL80211_IFTYPE_ADHOC: return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_AD_HOC_STOP, @@ -1440,7 +1446,7 @@ int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac) break; } - return 0; + return ret; } EXPORT_SYMBOL_GPL(mwifiex_deauthenticate); -- cgit v1.3-14-g43fede From 9612bd1ee3e3136e4748d7175bb6e7551482cc2e Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 11 Oct 2013 18:31:32 -0700 Subject: mwifiex: inform cfg80211 about disconnect for P2P client interface This patch adds missing cfg80211_disconnected event for P2P client interface upon successful deauthenticate command, deauthenticate event or disassociate event from FW. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c index 8b057524b252..8c351f71f72f 100644 --- a/drivers/net/wireless/mwifiex/sta_event.c +++ b/drivers/net/wireless/mwifiex/sta_event.c @@ -118,7 +118,8 @@ mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code) dev_dbg(adapter->dev, "info: successfully disconnected from %pM: reason code %d\n", priv->cfg_bssid, reason_code); - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { cfg80211_disconnected(priv->netdev, reason_code, NULL, 0, GFP_KERNEL); } -- cgit v1.3-14-g43fede From 6649b205ab1234c7b0ffbfba769f0604810c8ce2 Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:31 +0300 Subject: dm9000: during init reset phy only for dm9000b Some of the changes introduced in commit 6741f40 (DM9000B: driver initialization upgrade) break functionality on DM9000A (error message during NFS boot: "dm9000 dm9000.0: eth0: link down") Since the changes were meant to serve only DM9000B, make them dependent on the chip type. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 5f5896e522d2..912983b39492 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -891,8 +891,13 @@ dm9000_init_dm9000(struct net_device *dev) iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ - dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ - dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */ + /* If we are dealing with DM9000B, some extra steps are required: a + * manual phy reset, and setting init params. + */ + if (db->type == TYPE_DM9000B) { + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); + } ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; -- cgit v1.3-14-g43fede From 677d7d28686e468b4940c573ab2a01b198084bc4 Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:32 +0300 Subject: dm9000: take phy out of reset during init Take the phy out of reset explicitly during system resume to avoid losing network connectivity. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 912983b39492..3f650ce10cf4 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -890,6 +890,7 @@ dm9000_init_dm9000(struct net_device *dev) (dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); /* If we are dealing with DM9000B, some extra steps are required: a * manual phy reset, and setting init params. -- cgit v1.3-14-g43fede From 09ee9f87d02e779e4fc3f5c29212c733d6d6e349 Mon Sep 17 00:00:00 2001 From: Michael Abbott Date: Wed, 16 Oct 2013 11:41:33 +0300 Subject: dm9000: Implement full reset of DM9000 network device A Davicom application note for the DM9000 network device recommends performing software reset twice to correctly initialise the device. Without this reset some devices fail to initialise correctly on system startup. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Michael Abbott Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index 3f650ce10cf4..a179f8150034 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -158,18 +158,6 @@ static inline board_info_t *to_dm9000_board(struct net_device *dev) /* DM9000 network board routine ---------------------------- */ -static void -dm9000_reset(board_info_t * db) -{ - dev_dbg(db->dev, "resetting device\n"); - - /* RESET device */ - writeb(DM9000_NCR, db->io_addr); - udelay(200); - writeb(NCR_RST, db->io_data); - udelay(200); -} - /* * Read a byte from I/O port */ @@ -191,6 +179,27 @@ iow(board_info_t * db, int reg, int value) writeb(value, db->io_data); } +static void +dm9000_reset(board_info_t *db) +{ + dev_dbg(db->dev, "resetting device\n"); + + /* Reset DM9000, see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 + * The essential point is that we have to do a double reset, and the + * instruction is to set LBK into MAC internal loopback mode. + */ + iow(db, DM9000_NCR, 0x03); + udelay(100); /* Application note says at least 20 us */ + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to first reset\n"); + + iow(db, DM9000_NCR, 0); + iow(db, DM9000_NCR, 0x03); + udelay(100); + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to second reset\n"); +} + /* routines for sending block to chip */ static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) -- cgit v1.3-14-g43fede From 727a282fdb9bc1545542095def45a84d0480f78e Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 16 Oct 2013 11:41:34 +0300 Subject: dm9000: report the correct LPA Report the LPA by checking mii_if_info, instead of just saying "no LPA" every time. Cc: David S. Miller Cc: Jingoo Han Cc: Mugunthan V N Signed-off-by: Nikita Kiryanov Signed-off-by: Igor Grinberg Signed-off-by: David S. Miller --- drivers/net/ethernet/davicom/dm9000.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c index a179f8150034..a7a941b1a655 100644 --- a/drivers/net/ethernet/davicom/dm9000.c +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -753,15 +753,20 @@ static const struct ethtool_ops dm9000_ethtool_ops = { static void dm9000_show_carrier(board_info_t *db, unsigned carrier, unsigned nsr) { + int lpa; struct net_device *ndev = db->ndev; + struct mii_if_info *mii = &db->mii; unsigned ncr = dm9000_read_locked(db, DM9000_NCR); - if (carrier) - dev_info(db->dev, "%s: link up, %dMbps, %s-duplex, no LPA\n", + if (carrier) { + lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA); + dev_info(db->dev, + "%s: link up, %dMbps, %s-duplex, lpa 0x%04X\n", ndev->name, (nsr & NSR_SPEED) ? 10 : 100, - (ncr & NCR_FDX) ? "full" : "half"); - else + (ncr & NCR_FDX) ? "full" : "half", lpa); + } else { dev_info(db->dev, "%s: link down\n", ndev->name); + } } static void -- cgit v1.3-14-g43fede From 09b69024d97356fb660d1162e172ed4f1be7ceae Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 12 Oct 2013 14:24:08 +0800 Subject: usbnet: fix error return code in usbnet_probe() Fix to return -ENOMEM in the padding pkt alloc fail error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index bf94e10a37c8..90a429b7ebad 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1688,8 +1688,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) && !(info->flags & FLAG_MULTI_PACKET)) { dev->padding_pkt = kzalloc(1, GFP_KERNEL); - if (!dev->padding_pkt) + if (!dev->padding_pkt) { + status = -ENOMEM; goto out4; + } } status = register_netdev (net); -- cgit v1.3-14-g43fede From 60e66fee56b2256dcb1dc2ea1b2ddcb6e273857d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 12 Oct 2013 14:08:34 -0700 Subject: bnx2x: record rx queue for LRO packets RPS support is kind of broken on bnx2x, because only non LRO packets get proper rx queue information. This triggers reorders, as it seems bnx2x like to generate a non LRO packet for segment including TCP PUSH flag : (this might be pure coincidence, but all the reorders I've seen involve segments with a PUSH) 11:13:34.335847 IP A > B: . 415808:447136(31328) ack 1 win 457 11:13:34.335992 IP A > B: . 447136:448560(1424) ack 1 win 457 11:13:34.336391 IP A > B: . 448560:479888(31328) ack 1 win 457 11:13:34.336425 IP A > B: P 511216:512640(1424) ack 1 win 457 11:13:34.336423 IP A > B: . 479888:511216(31328) ack 1 win 457 11:13:34.336924 IP A > B: . 512640:543968(31328) ack 1 win 457 11:13:34.336963 IP A > B: . 543968:575296(31328) ack 1 win 457 We must call skb_record_rx_queue() to properly give to RPS (and more generally for TX queue selection on forward path) the receive queue information. Similar fix is needed for skb_mark_napi_id(), but will be handled in a separate patch to ease stable backports. Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Eilon Greenstein Acked-by: Dmitry Kravkov Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e66beff2704d..4ab4c89c60cd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -681,6 +681,7 @@ static void bnx2x_gro_receive(struct bnx2x *bp, struct bnx2x_fastpath *fp, } } #endif + skb_record_rx_queue(skb, fp->rx_queue); napi_gro_receive(&fp->napi, skb); } -- cgit v1.3-14-g43fede From dbbd2ad89bb1f86b94b23bb2e56d4935717f9b94 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Sun, 13 Oct 2013 21:17:01 +0200 Subject: net/ethernet: cpsw: Bugfix interrupts before enabling napi If interrupts happen before napi_enable was called, the driver will not work as expected. Network transmissions are impossible in this state. This bug can be reproduced easily by restarting the network interface in a loop. After some time any network transmissions on the network interface will fail. This patch fixes the bug by enabling napi before enabling the network interface interrupts. Signed-off-by: Markus Pargmann Acked-by: Peter Korsgaard Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 804846eb5fc2..fccd9d4d4ae0 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1169,9 +1169,9 @@ static int cpsw_ndo_open(struct net_device *ndev) } } + napi_enable(&priv->napi); cpdma_ctlr_start(priv->dma); cpsw_intr_enable(priv); - napi_enable(&priv->napi); cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX); cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_TX); -- cgit v1.3-14-g43fede From 39bb93f88c5db54cbe1df0b0aa957b3a8f2227ed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 14 Oct 2013 15:46:15 +0300 Subject: yam: remove a no-op in yam_ioctl() We overwrite the ->bitrate with the user supplied information on the next line. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/hamradio/yam.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c index 0721e72f9299..5af1c3e5032a 100644 --- a/drivers/net/hamradio/yam.c +++ b/drivers/net/hamradio/yam.c @@ -975,7 +975,6 @@ static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return -EINVAL; /* Cannot change this parameter when up */ if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL) return -ENOBUFS; - ym->bitrate = 9600; if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) { kfree(ym); return -EFAULT; -- cgit v1.3-14-g43fede From 3ab098df35f8b98b6553edc2e40234af512ba877 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 15 Oct 2013 11:18:58 +0800 Subject: virtio-net: don't respond to cpu hotplug notifier if we're not ready We're trying to re-configure the affinity unconditionally in cpu hotplug callback. This may lead the issue during resuming from s3/s4 since - virt queues haven't been allocated at that time. - it's unnecessary since thaw method will re-configure the affinity. Fix this issue by checking the config_enable and do nothing is we're not ready. The bug were introduced by commit 8de4b2f3ae90c8fc0f17eeaab87d5a951b66ee17 (virtio-net: reset virtqueue affinity when doing cpu hotplug). Cc: Rusty Russell Cc: Michael S. Tsirkin Cc: Wanlong Gao Acked-by: Michael S. Tsirkin Reviewed-by: Wanlong Gao Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index defec2b3c5a4..c4bc1cc7ef33 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1116,6 +1116,11 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, { struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb); + mutex_lock(&vi->config_lock); + + if (!vi->config_enable) + goto done; + switch(action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: case CPU_DOWN_FAILED: @@ -1128,6 +1133,9 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, default: break; } + +done: + mutex_unlock(&vi->config_lock); return NOTIFY_OK; } -- cgit v1.3-14-g43fede From 35ed159bfd96a7547ec277ed8b550c7cbd9841b6 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 15 Oct 2013 11:18:59 +0800 Subject: virtio-net: refill only when device is up during setting queues We used to schedule the refill work unconditionally after changing the number of queues. This may lead an issue if the device is not up. Since we only try to cancel the work in ndo_stop(), this may cause the refill work still work after removing the device. Fix this by only schedule the work when device is up. The bug were introduce by commit 9b9cd8024a2882e896c65222aa421d461354e3f2. (virtio-net: fix the race between channels setting and refill) Cc: Rusty Russell Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index c4bc1cc7ef33..9fbdfcd1e1a0 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -938,7 +938,9 @@ static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs) return -EINVAL; } else { vi->curr_queue_pairs = queue_pairs; - schedule_delayed_work(&vi->refill, 0); + /* virtnet_open() will refill when device is going to up. */ + if (dev->flags & IFF_UP) + schedule_delayed_work(&vi->refill, 0); } return 0; @@ -1741,7 +1743,9 @@ static int virtnet_restore(struct virtio_device *vdev) vi->config_enable = true; mutex_unlock(&vi->config_lock); + rtnl_lock(); virtnet_set_queues(vi, vi->curr_queue_pairs); + rtnl_unlock(); return 0; } -- cgit v1.3-14-g43fede From ce97fef4235378108ed3bd96e1b3eab8fd0a1fbd Mon Sep 17 00:00:00 2001 From: Enrico Mioso Date: Tue, 15 Oct 2013 15:06:48 +0200 Subject: net: qmi_wwan: Olivetti Olicard 200 support This is a QMI device, manufactured by TCT Mobile Phones. A companion patch blacklisting this device's QMI interface in the option.c driver has been sent. Signed-off-by: Enrico Mioso Signed-off-by: Antonella Pellizzari Tested-by: Dan Williams Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3d6aaf79d8b2..818ce90185b5 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -714,6 +714,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ + {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */ {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ /* 4. Gobi 1000 devices */ -- cgit v1.3-14-g43fede From 2b13d06c9584b4eb773f1e80bbaedab9a1c344e1 Mon Sep 17 00:00:00 2001 From: Salva Peiró Date: Wed, 16 Oct 2013 12:46:50 +0200 Subject: wanxl: fix info leak in ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The wanxl_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró Signed-off-by: David S. Miller --- drivers/net/wan/wanxl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c index 6a24a5a70cc7..4c0a69779b89 100644 --- a/drivers/net/wan/wanxl.c +++ b/drivers/net/wan/wanxl.c @@ -355,6 +355,7 @@ static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } + memset(&line, 0, sizeof(line)); line.clock_type = get_status(port)->clocking; line.clock_rate = 0; line.loopback = 0; -- cgit v1.3-14-g43fede From 0fb88d61bc60779dde88b0fc268da17eb81d0412 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Thu, 17 Oct 2013 11:47:14 +0530 Subject: be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd It is a required field for all TX_CREATE cmd versions > 0. This fixes a driver initialization failure, caused by recent SH-R Firmwares (versions > 10.0.639.0) failing the TX_CREATE cmd when if_id field is not passed. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index bd0e0c0bbcd8..c08fd32bb8e5 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1198,7 +1198,6 @@ int be_cmd_txq_create(struct be_adapter *adapter, struct be_tx_obj *txo) if (lancer_chip(adapter)) { req->hdr.version = 1; - req->if_id = cpu_to_le16(adapter->if_handle); } else if (BEx_chip(adapter)) { if (adapter->function_caps & BE_FUNCTION_CAPS_SUPER_NIC) req->hdr.version = 2; @@ -1206,6 +1205,8 @@ int be_cmd_txq_create(struct be_adapter *adapter, struct be_tx_obj *txo) req->hdr.version = 2; } + if (req->hdr.version > 0) + req->if_id = cpu_to_le16(adapter->if_handle); req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); req->ulp_num = BE_ULP1_NUM; req->type = BE_ETH_TX_RING_TYPE_STANDARD; -- cgit v1.3-14-g43fede From 66c562efbf35e98c42789f73cf39ad5f28abf6be Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 17 Oct 2013 18:26:38 -0400 Subject: qlcnic: Validate Tx queue only for 82xx adapters. o validate Tx queue only in case of adapters which supports multi Tx queue. This patch is to fix regression introduced in commit aa4a1f7df7cbb98797c9f4edfde3c726e2b3841f "qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter" Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 8 +------- 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index ebe4c86e5230..ff83a9fcd4c5 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -665,7 +665,7 @@ static int qlcnic_set_channels(struct net_device *dev, return err; } - if (channel->tx_count) { + if (qlcnic_82xx_check(adapter) && channel->tx_count) { err = qlcnic_validate_max_tx_rings(adapter, channel->tx_count); if (err) return err; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index f07f2b0fefa0..9e61eb867452 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -3651,11 +3651,6 @@ int qlcnic_validate_max_tx_rings(struct qlcnic_adapter *adapter, u32 txq) u8 max_hw = QLCNIC_MAX_TX_RINGS; u32 max_allowed; - if (!qlcnic_82xx_check(adapter)) { - netdev_err(netdev, "No Multi TX-Q support\n"); - return -EINVAL; - } - if (!qlcnic_use_msi_x && !qlcnic_use_msi) { netdev_err(netdev, "No Multi TX-Q support in INT-x mode\n"); return -EINVAL; @@ -3695,8 +3690,7 @@ int qlcnic_validate_max_rss(struct qlcnic_adapter *adapter, u8 max_hw = adapter->ahw->max_rx_ques; u32 max_allowed; - if (qlcnic_82xx_check(adapter) && !qlcnic_use_msi_x && - !qlcnic_use_msi) { + if (!qlcnic_use_msi_x && !qlcnic_use_msi) { netdev_err(netdev, "No RSS support in INT-x mode\n"); return -EINVAL; } -- cgit v1.3-14-g43fede From 49595b7b21ca60ebae7fb6d6fda7dc67d7bbbd66 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sun, 20 Oct 2013 12:32:26 +0530 Subject: drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing When interrupt pacing is enabled, receive/transmit statistics are not updated properly by hardware which leads to ISR return with IRQ_NONE and inturn kernel disables the interrupt. This patch removed the checking of receive/transmit statistics from ISR. This patch is verified with AM335x Beagle Bone Black and below is the kernel warn when interrupt pacing is enabled. [ 104.298254] irq 58: nobody cared (try booting with the "irqpoll" option) [ 104.305356] CPU: 0 PID: 1073 Comm: iperf Not tainted 3.12.0-rc3-00342-g77d4015 #3 [ 104.313284] [] (unwind_backtrace+0x0/0xf0) from [] (show_stack+0x10/0x14) [ 104.322282] [] (show_stack+0x10/0x14) from [] (dump_stack+0x78/0x94) [ 104.330816] [] (dump_stack+0x78/0x94) from [] (__report_bad_irq+0x20/0xc0) [ 104.339889] [] (__report_bad_irq+0x20/0xc0) from [] (note_interrupt+0x1dc/0x23c) [ 104.349505] [] (note_interrupt+0x1dc/0x23c) from [] (handle_irq_event_percpu+0xc4/0x238) [ 104.359851] [] (handle_irq_event_percpu+0xc4/0x238) from [] (handle_irq_event+0x3c/0x5c) [ 104.370198] [] (handle_irq_event+0x3c/0x5c) from [] (handle_level_irq+0xac/0x10c) [ 104.379907] [] (handle_level_irq+0xac/0x10c) from [] (generic_handle_irq+0x20/0x30) [ 104.389812] [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x4c/0xb0) [ 104.399066] [] (handle_IRQ+0x4c/0xb0) from [] (omap3_intc_handle_irq+0x60/0x74) [ 104.408598] [] (omap3_intc_handle_irq+0x60/0x74) from [] (__irq_svc+0x44/0x5c) [ 104.418021] Exception stack(0xde4f7c00 to 0xde4f7c48) [ 104.423345] 7c00: 00000001 00000000 00000000 dd002140 60000013 de006e54 00000002 00000000 [ 104.431952] 7c20: de345748 00000040 c11c8588 00018ee0 00000000 de4f7c48 c009dfc8 c050d300 [ 104.440553] 7c40: 60000013 ffffffff [ 104.444237] [] (__irq_svc+0x44/0x5c) from [] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 104.454220] [] (_raw_spin_unlock_irqrestore+0x34/0x44) from [] (__irq_put_desc_unlock+0x14/0x38) [ 104.465295] [] (__irq_put_desc_unlock+0x14/0x38) from [] (enable_irq+0x4c/0x74) [ 104.474829] [] (enable_irq+0x4c/0x74) from [] (cpsw_poll+0xb8/0xdc) [ 104.483276] [] (cpsw_poll+0xb8/0xdc) from [] (net_rx_action+0xc0/0x1e8) [ 104.492085] [] (net_rx_action+0xc0/0x1e8) from [] (__do_softirq+0x100/0x27c) [ 104.501338] [] (__do_softirq+0x100/0x27c) from [] (do_softirq+0x68/0x70) [ 104.510224] [] (do_softirq+0x68/0x70) from [] (local_bh_enable+0xd0/0xe4) [ 104.519211] [] (local_bh_enable+0xd0/0xe4) from [] (tcp_rcv_established+0x450/0x648) [ 104.529201] [] (tcp_rcv_established+0x450/0x648) from [] (tcp_v4_do_rcv+0x154/0x474) [ 104.539195] [] (tcp_v4_do_rcv+0x154/0x474) from [] (release_sock+0xac/0x1ac) [ 104.548448] [] (release_sock+0xac/0x1ac) from [] (tcp_recvmsg+0x4d0/0xa8c) [ 104.557528] [] (tcp_recvmsg+0x4d0/0xa8c) from [] (inet_recvmsg+0xcc/0xf0) [ 104.566507] [] (inet_recvmsg+0xcc/0xf0) from [] (sock_recvmsg+0x90/0xb0) [ 104.575394] [] (sock_recvmsg+0x90/0xb0) from [] (SyS_recvfrom+0x88/0xd8) [ 104.584280] [] (SyS_recvfrom+0x88/0xd8) from [] (sys_recv+0x18/0x20) [ 104.592805] [] (sys_recv+0x18/0x20) from [] (ret_fast_syscall+0x0/0x48) [ 104.601587] handlers: [ 104.603992] [] cpsw_interrupt [ 104.608040] Disabling IRQ #58 Cc: Sebastian Siewior Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index fccd9d4d4ae0..cc3ce557e4aa 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -639,13 +639,6 @@ void cpsw_rx_handler(void *token, int len, int status) static irqreturn_t cpsw_interrupt(int irq, void *dev_id) { struct cpsw_priv *priv = dev_id; - u32 rx, tx, rx_thresh; - - rx_thresh = __raw_readl(&priv->wr_regs->rx_thresh_stat); - rx = __raw_readl(&priv->wr_regs->rx_stat); - tx = __raw_readl(&priv->wr_regs->tx_stat); - if (!rx_thresh && !rx && !tx) - return IRQ_NONE; cpsw_intr_disable(priv); if (priv->irq_enabled == true) { -- cgit v1.3-14-g43fede From b1239723f0564778d993d51d18afdfda01bdaca3 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:26 +0200 Subject: bnx2x: Fix Maximum CoS estimation for VFs bnx2x VFs do not support Multi-CoS; Current implementation erroneously sets the VFs maximal number of CoS to be > 1. This will cause the driver to call alloc_etherdev_mqs() with a number of queues it cannot possibly support and reflects in 'odd' driver prints. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 82b658d8c04c..60f9e68ea46c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12612,24 +12612,24 @@ static int set_max_cos_est(int chip_id) return BNX2X_MULTI_TX_COS_E1X; case BCM57712: case BCM57712_MF: - case BCM57712_VF: return BNX2X_MULTI_TX_COS_E2_E3A0; case BCM57800: case BCM57800_MF: - case BCM57800_VF: case BCM57810: case BCM57810_MF: case BCM57840_4_10: case BCM57840_2_20: case BCM57840_O: case BCM57840_MFO: - case BCM57810_VF: case BCM57840_MF: - case BCM57840_VF: case BCM57811: case BCM57811_MF: - case BCM57811_VF: return BNX2X_MULTI_TX_COS_E3B0; + case BCM57712_VF: + case BCM57800_VF: + case BCM57810_VF: + case BCM57840_VF: + case BCM57811_VF: return 1; default: pr_err("Unknown board_type (%d), aborting\n", chip_id); -- cgit v1.3-14-g43fede From 1a6974b2c78755ae55d7be738866eb8d57c3ed45 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:27 +0200 Subject: bnx2x: Prevent an illegal pointer dereference during panic During a panic, the driver tries to print the Management FW buffer of recent commands. To do so, the driver reads the address of that buffer from a known address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is failing, etc.), the driver will try to access the address it has read, possibly causing a kernel panic. This check 'sanitizes' the access, validating the read value is indeed a valid address inside the management FW's buffers. The patch also removes a read outside the scope of the buffer, which resulted in some unrelated chraracters appearing in the log. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 +++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 32 ++++++++++++++++++------ 2 files changed, 29 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 97b3d32a98bd..d21742ca2fd2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2498,4 +2498,8 @@ enum bnx2x_pci_bus_speed { }; void bnx2x_set_local_cmng(struct bnx2x *bp); + +#define MCPR_SCRATCH_BASE(bp) \ + (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) + #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 60f9e68ea46c..c2609c41340e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -751,6 +751,10 @@ static int bnx2x_mc_assert(struct bnx2x *bp) return rc; } +#define MCPR_TRACE_BUFFER_SIZE (0x800) +#define SCRATCH_BUFFER_SIZE(bp) \ + (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000)) + void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) { u32 addr, val; @@ -775,7 +779,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) trace_shmem_base = bp->common.shmem_base; else trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr); - addr = trace_shmem_base - 0x800; + + /* sanity */ + if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE || + trace_shmem_base >= MCPR_SCRATCH_BASE(bp) + + SCRATCH_BUFFER_SIZE(bp)) { + BNX2X_ERR("Unable to dump trace buffer (mark %x)\n", + trace_shmem_base); + return; + } + + addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE; /* validate TRCB signature */ mark = REG_RD(bp, addr); @@ -787,14 +801,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) /* read cyclic buffer pointer */ addr += 4; mark = REG_RD(bp, addr); - mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) - + ((mark + 0x3) & ~0x3) - 0x08000000; + mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000; + if (mark >= trace_shmem_base || mark < addr + 4) { + BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n"); + return; + } printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark); printk("%s", lvl); /* dump buffer after the mark */ - for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) { + for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, offset + 4*word)); data[8] = 0x0; @@ -11685,9 +11702,6 @@ static int bnx2x_init_bp(struct bnx2x *bp) static int bnx2x_open(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); - bool global = false; - int other_engine = BP_PATH(bp) ? 0 : 1; - bool other_load_status, load_status; int rc; bp->stats_init = true; @@ -11703,6 +11717,10 @@ static int bnx2x_open(struct net_device *dev) * Parity recovery is only relevant for PF driver. */ if (IS_PF(bp)) { + int other_engine = BP_PATH(bp) ? 0 : 1; + bool other_load_status, load_status; + bool global = false; + other_load_status = bnx2x_get_load_status(bp, other_engine); load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) || -- cgit v1.3-14-g43fede From 31329afdacd107f129dd4ed4464233a7e514ca7d Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:28 +0200 Subject: bnx2x: Unlock VF-PF channel on MAC/VLAN config error Current code returns upon failure, leaving the VF-PF in an unusable state; This patch adds the missing release so further commands could pass between PF and VF. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 9ad012bdd915..997c6611a2ae 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3390,14 +3390,16 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true); if (rc) { BNX2X_ERR("failed to delete eth macs\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* remove existing uc list macs */ rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true); if (rc) { BNX2X_ERR("failed to delete uc_list macs\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* configure the new mac to device */ @@ -3405,6 +3407,7 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true, BNX2X_ETH_MAC, &ramrod_flags); +out: bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC); } @@ -3467,7 +3470,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) &ramrod_flags); if (rc) { BNX2X_ERR("failed to delete vlans\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* send queue update ramrod to configure default vlan and silent @@ -3501,7 +3505,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) rc = bnx2x_config_vlan_mac(bp, &ramrod_param); if (rc) { BNX2X_ERR("failed to configure vlan\n"); - return -EINVAL; + rc = -EINVAL; + goto out; } /* configure default vlan to vf queue and set silent @@ -3519,18 +3524,18 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) rc = bnx2x_queue_state_change(bp, &q_params); if (rc) { BNX2X_ERR("Failed to configure default VLAN\n"); - return rc; + goto out; } /* clear the flag indicating that this VF needs its vlan - * (will only be set if the HV configured th Vlan before vf was - * and we were called because the VF came up later + * (will only be set if the HV configured the Vlan before vf was + * up and we were called because the VF came up later */ +out: vf->cfg_flags &= ~VF_CFG_VLAN; - bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); } - return 0; + return rc; } /* crc is the first field in the bulletin board. Compute the crc over the -- cgit v1.3-14-g43fede From 6802516edd1bfa6dfaea7949046d173e656ee6d3 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 20 Oct 2013 16:51:29 +0200 Subject: bnx2x: Fix Coalescing configuration bnx2x drivers configure coalescing incorrectly (e.g., as a result of a call to 'ethtool -c'). Although this is almost invisible to the user (due to NAPI) designated tests will show the configuration is incorrect. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d21742ca2fd2..986edbf89ea0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1621,7 +1621,7 @@ struct bnx2x { u16 rx_ticks_int; u16 rx_ticks; /* Maximal coalescing timeout in us */ -#define BNX2X_MAX_COALESCE_TOUT (0xf0*12) +#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR) u32 lin_cnt; -- cgit v1.3-14-g43fede From 0907f34c372766e2822ffd0ec290c69199835faa Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:30 +0200 Subject: bnx2x: Fix config when SR-IOV and iSCSI are enabled Starting with commit b9871bc "bnx2x: VF RSS support - PF side", if a PF will have SR-IOV supported in its PCI configuration space, storage drivers will not work for that interface. This patch fixes the resource calculation to allow such a configuration to properly work. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 986edbf89ea0..275b1261e533 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1197,8 +1197,9 @@ union cdu_context { /* TM (timers) host DB constants */ #define TM_ILT_PAGE_SZ_HW 0 #define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */ -/* #define TM_CONN_NUM (CNIC_STARTING_CID+CNIC_ISCSI_CXT_MAX) */ -#define TM_CONN_NUM 1024 +#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \ + BNX2X_VF_CIDS + \ + CNIC_ISCSI_CID_MAX) #define TM_ILT_SZ (8 * TM_CONN_NUM) #define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ) -- cgit v1.3-14-g43fede From 6b991c3763e15a0884095fc0c133980c5577e9c7 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 20 Oct 2013 16:51:31 +0200 Subject: bnx2x: Prevent null pointer dereference on error flow If debug message is open and bnx2x_vfop_qdtor_cmd() were to fail, the resulting print would have caused a null pointer dereference. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 997c6611a2ae..bf08ad68b405 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -470,10 +470,10 @@ static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp, bnx2x_vfop_qdtor, cmd->done); return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor, cmd->block); + } else { + BNX2X_ERR("VF[%d] failed to add a vfop\n", vf->abs_vfid); + return -ENOMEM; } - DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n", - vf->abs_vfid, vfop->rc); - return -ENOMEM; } static void -- cgit v1.3-14-g43fede From 32316a46f2bbd4a898acf86547197cff8476f442 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 20 Oct 2013 16:51:32 +0200 Subject: bnx2x: Lock DMAE when used by statistic flow bnx2x has several clients to its DMAE machines - all of them with the exception of the statistics flow used the same locking mechanisms to synchronize the DMAE machines' usage. Since statistics (which are periodically entered) use DMAE without taking the locks, they may erase the commands which were previously set - e.g., it may cause a VF to timeout while waiting for a PF answer on the VF-PF channel as that command header would have been overwritten by the statistics' header. This patch makes certain that all flows utilizing DMAE will use the same API, assuring that the locking scheme will be kept by all said flows. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++------- drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 275b1261e533..310c57aa9221 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2073,7 +2073,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, u8 src_type, u8 dst_type); -int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae); +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp); /* FLR related routines */ u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c2609c41340e..236707228f67 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -503,9 +503,9 @@ void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, } /* issue a dmae command over the init-channel and wait for completion */ -int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) +int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae, + u32 *comp) { - u32 *wb_comp = bnx2x_sp(bp, wb_comp); int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000; int rc = 0; @@ -518,14 +518,14 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) spin_lock_bh(&bp->dmae_lock); /* reset completion */ - *wb_comp = 0; + *comp = 0; /* post the command on the channel used for initializations */ bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); /* wait for completion */ udelay(5); - while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { + while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { if (!cnt || (bp->recovery_state != BNX2X_RECOVERY_DONE && @@ -537,7 +537,7 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae) cnt--; udelay(50); } - if (*wb_comp & DMAE_PCI_ERR_FLAG) { + if (*comp & DMAE_PCI_ERR_FLAG) { BNX2X_ERR("DMAE PCI error!\n"); rc = DMAE_PCI_ERROR; } @@ -574,7 +574,7 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, dmae.len = len32; /* issue the command and wait for completion */ - rc = bnx2x_issue_dmae_with_comp(bp, &dmae); + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); if (rc) { BNX2X_ERR("DMAE returned failure %d\n", rc); bnx2x_panic(); @@ -611,7 +611,7 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) dmae.len = len32; /* issue the command and wait for completion */ - rc = bnx2x_issue_dmae_with_comp(bp, &dmae); + rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); if (rc) { BNX2X_ERR("DMAE returned failure %d\n", rc); bnx2x_panic(); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 86436c77af03..3b75070411aa 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -196,7 +196,7 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) } else if (bp->func_stx) { *stats_comp = 0; - bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); + bnx2x_issue_dmae_with_comp(bp, dmae, stats_comp); } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index da16953eb2ec..28757dfacf0d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -980,7 +980,7 @@ static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf, dmae.len = len32; /* issue the command and wait for completion */ - return bnx2x_issue_dmae_with_comp(bp, &dmae); + return bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp)); } static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf) -- cgit v1.3-14-g43fede From 4293b9f57a46469d6762be3300e2c3fa6515905d Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 20 Oct 2013 16:51:33 +0200 Subject: bnx2x: Don't pretend during register dump As part of a register dump, the interface pretends to have the identity of other interfaces of the same physical device in order to perform HW configuration for them - specifically, it needs to prevent attentions from generating on those functions as the register dump accesses registers in common blocks which whose reading might generate an attention. However, such pretension is unsafe - unlike other flows in which the driver uses pretend, during register dump there is no guarantee no other HW access will take place (by other flows). If such access will take place, the HW will be accessed by the wrong interface, and leave both functions in an incorrect state. This patch removes all pretensions from the register dump flow. Instead, it changes initial configuration of attentions such that no fatal attention will be generated for other functions as a result of the register dump (notice however, a debug print claiming an attention from other functions IS possible during the register dump) Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 40 +-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 38 ++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 328 +++++++++++---------- 3 files changed, 201 insertions(+), 205 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 324de5f05332..e8efa1c93ffe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -891,17 +891,8 @@ static void bnx2x_get_regs(struct net_device *dev, * will re-enable parity attentions right after the dump. */ - /* Disable parity on path 0 */ - bnx2x_pretend_func(bp, 0); bnx2x_disable_blocks_parity(bp); - /* Disable parity on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_disable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; dump_hdr.preset = DUMP_ALL_PRESETS; dump_hdr.version = BNX2X_DUMP_VERSION; @@ -928,18 +919,9 @@ static void bnx2x_get_regs(struct net_device *dev, /* Actually read the registers */ __bnx2x_get_regs(bp, p); - /* Re-enable parity attentions on path 0 */ - bnx2x_pretend_func(bp, 0); + /* Re-enable parity attentions */ bnx2x_clear_blocks_parity(bp); bnx2x_enable_blocks_parity(bp); - - /* Re-enable parity attentions on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_clear_blocks_parity(bp); - bnx2x_enable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); } static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset) @@ -993,17 +975,8 @@ static int bnx2x_get_dump_data(struct net_device *dev, * will re-enable parity attentions right after the dump. */ - /* Disable parity on path 0 */ - bnx2x_pretend_func(bp, 0); bnx2x_disable_blocks_parity(bp); - /* Disable parity on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_disable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1; dump_hdr.preset = bp->dump_preset_idx; dump_hdr.version = BNX2X_DUMP_VERSION; @@ -1032,19 +1005,10 @@ static int bnx2x_get_dump_data(struct net_device *dev, /* Actually read the registers */ __bnx2x_get_preset_regs(bp, p, dump_hdr.preset); - /* Re-enable parity attentions on path 0 */ - bnx2x_pretend_func(bp, 0); + /* Re-enable parity attentions */ bnx2x_clear_blocks_parity(bp); bnx2x_enable_blocks_parity(bp); - /* Re-enable parity attentions on path 1 */ - bnx2x_pretend_func(bp, 1); - bnx2x_clear_blocks_parity(bp); - bnx2x_enable_blocks_parity(bp); - - /* Return to current function */ - bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); - return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index 76df015f486a..c2dfea7968f4 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -640,23 +640,35 @@ static const struct { * [30] MCP Latched ump_tx_parity * [31] MCP Latched scpad_parity */ -#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ +#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \ (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ - AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY) + +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) /* Below registers control the MCP parity attention output. When * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are * enabled, when cleared - disabled. */ -static const u32 mcp_attn_ctl_regs[] = { - MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_0, - MISC_REG_AEU_ENABLE4_PXP_0, - MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, - MISC_REG_AEU_ENABLE4_NIG_1, - MISC_REG_AEU_ENABLE4_PXP_1 +static const struct { + u32 addr; + u32 bits; +} mcp_attn_ctl_regs[] = { + { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_0, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_AEU_ENABLE_MCP_PRTY_BITS }, + { MISC_REG_AEU_ENABLE4_NIG_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }, + { MISC_REG_AEU_ENABLE4_PXP_1, + MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS } }; static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) @@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) u32 reg_val; for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) { - reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]); + reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr); if (enable) - reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val |= mcp_attn_ctl_regs[i].bits; else - reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; + reg_val &= ~mcp_attn_ctl_regs[i].bits; - REG_WR(bp, mcp_attn_ctl_regs[i], reg_val); + REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val); } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 236707228f67..7a66bd2b8259 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -4297,65 +4297,60 @@ static void _print_next_block(int idx, const char *blk) pr_cont("%s%s", idx ? ", " : "", blk); } -static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "BRB"); + res |= true; /* Each bit is real error! */ + + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR: + _print_next_block((*par_num)++, "BRB"); _print_parity(bp, BRB1_REG_BRB1_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PARSER"); + break; + case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR: + _print_next_block((*par_num)++, + "PARSER"); _print_parity(bp, PRS_REG_PRS_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TSDM"); + break; + case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR: + _print_next_block((*par_num)++, "TSDM"); _print_parity(bp, TSDM_REG_TSDM_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, + break; + case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR: + _print_next_block((*par_num)++, "SEARCHER"); _print_parity(bp, SRC_REG_SRC_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TCM"); - _print_parity(bp, - TCM_REG_TCM_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "TSEMI"); + break; + case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR: + _print_next_block((*par_num)++, "TCM"); + _print_parity(bp, TCM_REG_TCM_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "TSEMI"); _print_parity(bp, TSEM_REG_TSEM_PRTY_STS_0); _print_parity(bp, TSEM_REG_TSEM_PRTY_STS_1); - } - break; - case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "XPB"); + break; + case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, "XPB"); _print_parity(bp, GRCBASE_XPB + PB_REG_PB_PRTY_STS); + break; } - break; } /* Clear the bit */ @@ -4363,53 +4358,59 @@ static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, - int par_num, bool *global, +static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { + res |= true; /* Each bit is real error! */ switch (cur_bit) { case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "PBF"); + _print_next_block((*par_num)++, "PBF"); _print_parity(bp, PBF_REG_PBF_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "QM"); + _print_next_block((*par_num)++, "QM"); _print_parity(bp, QM_REG_QM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "TM"); + _print_next_block((*par_num)++, "TM"); _print_parity(bp, TM_REG_TM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XSDM"); + _print_next_block((*par_num)++, "XSDM"); _print_parity(bp, XSDM_REG_XSDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XCM"); + _print_next_block((*par_num)++, "XCM"); _print_parity(bp, XCM_REG_XCM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "XSEMI"); + _print_next_block((*par_num)++, + "XSEMI"); _print_parity(bp, XSEM_REG_XSEM_PRTY_STS_0); _print_parity(bp, @@ -4418,7 +4419,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR: if (print) { - _print_next_block(par_num++, + _print_next_block((*par_num)++, "DOORBELLQ"); _print_parity(bp, DORQ_REG_DORQ_PRTY_STS); @@ -4426,7 +4427,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "NIG"); + _print_next_block((*par_num)++, "NIG"); if (CHIP_IS_E1x(bp)) { _print_parity(bp, NIG_REG_NIG_PRTY_STS); @@ -4440,32 +4441,34 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "VAUX PCI CORE"); *global = true; break; case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "DEBUG"); + _print_next_block((*par_num)++, + "DEBUG"); _print_parity(bp, DBG_REG_DBG_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "USDM"); + _print_next_block((*par_num)++, "USDM"); _print_parity(bp, USDM_REG_USDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "UCM"); + _print_next_block((*par_num)++, "UCM"); _print_parity(bp, UCM_REG_UCM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "USEMI"); + _print_next_block((*par_num)++, + "USEMI"); _print_parity(bp, USEM_REG_USEM_PRTY_STS_0); _print_parity(bp, @@ -4474,21 +4477,21 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, break; case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "UPB"); + _print_next_block((*par_num)++, "UPB"); _print_parity(bp, GRCBASE_UPB + PB_REG_PB_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "CSDM"); + _print_next_block((*par_num)++, "CSDM"); _print_parity(bp, CSDM_REG_CSDM_PRTY_STS); } break; case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR: if (print) { - _print_next_block(par_num++, "CCM"); + _print_next_block((*par_num)++, "CCM"); _print_parity(bp, CCM_REG_CCM_PRTY_STS); } break; @@ -4499,80 +4502,73 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CSEMI"); + res |= true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR: + _print_next_block((*par_num)++, + "CSEMI"); _print_parity(bp, CSEM_REG_CSEM_PRTY_STS_0); _print_parity(bp, CSEM_REG_CSEM_PRTY_STS_1); - } - break; - case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PXP"); + break; + case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR: + _print_next_block((*par_num)++, "PXP"); _print_parity(bp, PXP_REG_PXP_PRTY_STS); _print_parity(bp, PXP2_REG_PXP2_PRTY_STS_0); _print_parity(bp, PXP2_REG_PXP2_PRTY_STS_1); - } - break; - case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: - if (print) - _print_next_block(par_num++, - "PXPPCICLOCKCLIENT"); - break; - case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CFC"); + break; + case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR: + _print_next_block((*par_num)++, + "PXPPCICLOCKCLIENT"); + break; + case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR: + _print_next_block((*par_num)++, "CFC"); _print_parity(bp, CFC_REG_CFC_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "CDU"); + break; + case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR: + _print_next_block((*par_num)++, "CDU"); _print_parity(bp, CDU_REG_CDU_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "DMAE"); + break; + case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR: + _print_next_block((*par_num)++, "DMAE"); _print_parity(bp, DMAE_REG_DMAE_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "IGU"); + break; + case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR: + _print_next_block((*par_num)++, "IGU"); if (CHIP_IS_E1x(bp)) _print_parity(bp, HC_REG_HC_PRTY_STS); else _print_parity(bp, IGU_REG_IGU_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "MISC"); + break; + case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR: + _print_next_block((*par_num)++, "MISC"); _print_parity(bp, MISC_REG_MISC_PRTY_STS); + break; } - break; } /* Clear the bit */ @@ -4580,40 +4576,49 @@ static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num, - bool *global, bool print) +static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig, + int *par_num, bool *global, + bool print) { - int i = 0; - u32 cur_bit = 0; + bool res = false; + u32 cur_bit; + int i; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { switch (cur_bit) { case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY: if (print) - _print_next_block(par_num++, "MCP ROM"); + _print_next_block((*par_num)++, + "MCP ROM"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP UMP RX"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP UMP TX"); *global = true; + res |= true; break; case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY: if (print) - _print_next_block(par_num++, + _print_next_block((*par_num)++, "MCP SCPAD"); - *global = true; + /* clear latched SCPAD PATIRY from MCP */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, + 1UL << 10); break; } @@ -4622,45 +4627,50 @@ static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num, } } - return par_num; + return res; } -static int bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, - int par_num, bool print) +static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig, + int *par_num, bool print) { - int i = 0; - u32 cur_bit = 0; + u32 cur_bit; + bool res; + int i; + + res = false; + for (i = 0; sig; i++) { - cur_bit = ((u32)0x1 << i); + cur_bit = (0x1UL << i); if (sig & cur_bit) { - switch (cur_bit) { - case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "PGLUE_B"); + res |= true; /* Each bit is real error! */ + if (print) { + switch (cur_bit) { + case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR: + _print_next_block((*par_num)++, + "PGLUE_B"); _print_parity(bp, - PGLUE_B_REG_PGLUE_B_PRTY_STS); - } - break; - case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: - if (print) { - _print_next_block(par_num++, "ATC"); + PGLUE_B_REG_PGLUE_B_PRTY_STS); + break; + case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR: + _print_next_block((*par_num)++, "ATC"); _print_parity(bp, ATC_REG_ATC_PRTY_STS); + break; } - break; } - /* Clear the bit */ sig &= ~cur_bit; } } - return par_num; + return res; } static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, u32 *sig) { + bool res = false; + if ((sig[0] & HW_PRTY_ASSERT_SET_0) || (sig[1] & HW_PRTY_ASSERT_SET_1) || (sig[2] & HW_PRTY_ASSERT_SET_2) || @@ -4677,23 +4687,22 @@ static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print, if (print) netdev_err(bp->dev, "Parity errors detected in blocks: "); - par_num = bnx2x_check_blocks_with_parity0(bp, - sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print); - par_num = bnx2x_check_blocks_with_parity1(bp, - sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print); - par_num = bnx2x_check_blocks_with_parity2(bp, - sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print); - par_num = bnx2x_check_blocks_with_parity3( - sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print); - par_num = bnx2x_check_blocks_with_parity4(bp, - sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print); + res |= bnx2x_check_blocks_with_parity0(bp, + sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print); + res |= bnx2x_check_blocks_with_parity1(bp, + sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity2(bp, + sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print); + res |= bnx2x_check_blocks_with_parity3(bp, + sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print); + res |= bnx2x_check_blocks_with_parity4(bp, + sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print); if (print) pr_cont("\n"); + } - return true; - } else - return false; + return res; } /** @@ -7143,7 +7152,7 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) int port = BP_PORT(bp); int init_phase = port ? PHASE_PORT1 : PHASE_PORT0; u32 low, high; - u32 val; + u32 val, reg; DP(NETIF_MSG_HW, "starting port init port %d\n", port); @@ -7288,6 +7297,17 @@ static int bnx2x_init_hw_port(struct bnx2x *bp) val |= CHIP_IS_E1(bp) ? 0 : 0x10; REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val); + /* SCPAD_PARITY should NOT trigger close the gates */ + reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + + reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0; + REG_WR(bp, reg, + REG_RD(bp, reg) & + ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY); + bnx2x_init_block(bp, BLOCK_NIG, init_phase); if (!CHIP_IS_E1x(bp)) { -- cgit v1.3-14-g43fede From edd31476011052d8f6591a3194ba0716b0cea681 Mon Sep 17 00:00:00 2001 From: Merav Sicron Date: Sun, 20 Oct 2013 16:51:34 +0200 Subject: bnx2x: Set NETIF_F_HIGHDMA unconditionally Current driver implementation incorrectly sets the flag only if 64-bit DMA mask succeeded. Signed-off-by: Merav Sicron Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +--- 2 files changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 310c57aa9221..c5e375ddd6c0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1528,7 +1528,6 @@ struct bnx2x { #define PCI_32BIT_FLAG (1 << 1) #define ONE_PORT_FLAG (1 << 2) #define NO_WOL_FLAG (1 << 3) -#define USING_DAC_FLAG (1 << 4) #define USING_MSIX_FLAG (1 << 5) #define USING_MSI_FLAG (1 << 6) #define DISABLE_MSI_FLAG (1 << 7) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 7a66bd2b8259..b42f89ce02ef 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12118,7 +12118,6 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp) struct device *dev = &bp->pdev->dev; if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) { - bp->flags |= USING_DAC_FLAG; if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) { dev_err(dev, "dma_set_coherent_mask failed, aborting\n"); return -EIO; @@ -12286,8 +12285,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev, NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA; dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX; - if (bp->flags & USING_DAC_FLAG) - dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_HIGHDMA; /* Add Loopback capability to the device */ dev->hw_features |= NETIF_F_LOOPBACK; -- cgit v1.3-14-g43fede From d69e0f7ea95fef8059251325a79c004bac01f018 Mon Sep 17 00:00:00 2001 From: Mariusz Ceier Date: Mon, 21 Oct 2013 19:45:04 +0200 Subject: davinci_emac.c: Fix IFF_ALLMULTI setup When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 67df09ea9d04..6a32ef9d63ae 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -876,8 +876,7 @@ static void emac_dev_mcast_set(struct net_device *ndev) netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); - } - if (!netdev_mc_empty(ndev)) { + } else if (!netdev_mc_empty(ndev)) { struct netdev_hw_addr *ha; mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); -- cgit v1.3-14-g43fede From 7e78b83cb95dd2c3a6c829c5d861d515c1d817a5 Mon Sep 17 00:00:00 2001 From: Freddy Xin Date: Tue, 22 Oct 2013 15:32:10 +0800 Subject: ax88179_178a: Correct the RX error definition in RX header Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 3569293df872..3bcd0d9a6f82 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -36,8 +36,8 @@ #define AX_RXHDR_L4_TYPE_TCP 16 #define AX_RXHDR_L3CSUM_ERR 2 #define AX_RXHDR_L4CSUM_ERR 1 -#define AX_RXHDR_CRC_ERR ((u32)BIT(31)) -#define AX_RXHDR_DROP_ERR ((u32)BIT(30)) +#define AX_RXHDR_CRC_ERR ((u32)BIT(29)) +#define AX_RXHDR_DROP_ERR ((u32)BIT(31)) #define AX_ACCESS_MAC 0x01 #define AX_ACCESS_PHY 0x02 #define AX_ACCESS_EEPROM 0x04 -- cgit v1.3-14-g43fede From f11a5bc148a313ad37c361c87c9aff2331a8b149 Mon Sep 17 00:00:00 2001 From: Freddy Xin Date: Tue, 22 Oct 2013 15:32:11 +0800 Subject: ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: Freddy Xin Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 3bcd0d9a6f82..846cc19c04f2 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1406,6 +1406,19 @@ static const struct driver_info sitecom_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info samsung_info = { + .description = "Samsung USB Ethernet Adapter", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct usb_device_id products[] = { { /* ASIX AX88179 10/100/1000 */ @@ -1418,7 +1431,11 @@ static const struct usb_device_id products[] = { }, { /* Sitecom USB 3.0 to Gigabit Adapter */ USB_DEVICE(0x0df6, 0x0072), - .driver_info = (unsigned long) &sitecom_info, + .driver_info = (unsigned long)&sitecom_info, +}, { + /* Samsung USB Ethernet Adapter */ + USB_DEVICE(0x04e8, 0xa100), + .driver_info = (unsigned long)&samsung_info, }, { }, }; -- cgit v1.3-14-g43fede