From 6678716751af24af09163aef54bbabb60c12e18b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:53:53 +0000 Subject: spi: qup: Remove spi_master_put in spi_qup_remove() The call to spi_master_put() in spi_qup_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in spi_qup_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-qup.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index c338ef1136f6..7f1555621f8e 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -1030,7 +1030,6 @@ static int spi_qup_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); - spi_master_put(master); return 0; } -- cgit v1.3-18-gd494 From c2b08cede727387a5e19b40fa8e1a1e3a53e8527 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:56:50 +0000 Subject: spi: mediatek: remove spi_master_put in mtk_spi_remove() The call to spi_master_put() in mtk_spi_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in mtk_spi_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mt65xx.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 0be89e052428..899d7a8f0889 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -685,7 +685,6 @@ static int mtk_spi_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); mtk_spi_reset(mdata); - spi_master_put(master); return 0; } -- cgit v1.3-18-gd494 From 2932c287108e2987454449b8214eae6db066da85 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:57:55 +0000 Subject: spi: img-spfi: Remove spi_master_put in img_spfi_remove() The call to spi_master_put() in img_spfi_remove() is redundant since the master is registered using devm_spi_register_master() and no reference hold by using spi_master_get() in img_spfi_remove(). This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-img-spfi.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index 823cbc92d1e7..7a37090dabbe 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -720,8 +720,6 @@ static int img_spfi_remove(struct platform_device *pdev) clk_disable_unprepare(spfi->sys_clk); } - spi_master_put(master); - return 0; } -- cgit v1.3-18-gd494 From b2c7f5d9c939a37c1ce7f86a642de70e3033ee9e Mon Sep 17 00:00:00 2001 From: Maarten ter Huurne Date: Fri, 29 Jul 2016 23:42:12 +0200 Subject: regmap: cache: Fix num_reg_defaults computation from reg_defaults_raw In 3245d460 (regmap: cache: Fall back to register by register read for cache defaults) non-readable registers are skipped when initializing reg_defaults, but are still included in num_reg_defaults. So there can be uninitialized entries at the end of reg_defaults, which can cause problems when the register cache initializes from the full array. Fixed it by excluding non-readable registers from the count as well. Signed-off-by: Maarten ter Huurne Signed-off-by: Mark Brown --- drivers/base/regmap/regcache.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index df7ff7290821..4e582561e1e7 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -38,10 +38,11 @@ static int regcache_hw_init(struct regmap *map) /* calculate the size of reg_defaults */ for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) - if (!regmap_volatile(map, i * map->reg_stride)) + if (regmap_readable(map, i * map->reg_stride) && + !regmap_volatile(map, i * map->reg_stride)) count++; - /* all registers are volatile, so just bypass */ + /* all registers are unreadable or volatile, so just bypass */ if (!count) { map->cache_bypass = true; return 0; -- cgit v1.3-18-gd494 From 9b622e2bbcf049c82e2550d35fb54ac205965f50 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Thu, 28 Jul 2016 10:28:25 +0200 Subject: raid10: increment write counter after bio is split md pending write counter must be incremented after bio is split, otherwise it gets decremented too many times in end bio callback and becomes negative. Signed-off-by: Tomasz Majchrzak Reviewed-by: Artur Paszkiewicz Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index ed29fc899f06..1a632a8c8005 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1064,6 +1064,8 @@ static void __make_request(struct mddev *mddev, struct bio *bio) int max_sectors; int sectors; + md_write_start(mddev, bio); + /* * Register the new request and wait if the reconstruction * thread has put up a bar for new requests. @@ -1445,8 +1447,6 @@ static void raid10_make_request(struct mddev *mddev, struct bio *bio) return; } - md_write_start(mddev, bio); - do { /* -- cgit v1.3-18-gd494 From ff00d3b4e5e4395c825e8ec628f25932d812f31a Mon Sep 17 00:00:00 2001 From: ZhengYuan Liu Date: Thu, 28 Jul 2016 14:22:14 +0800 Subject: raid5: fix incorrectly counter of conf->empty_inactive_list_nr The counter conf->empty_inactive_list_nr is only used for determine if the raid5 is congested which is deal with in function raid5_congested(). It was increased in get_free_stripe() when conf->inactive_list got to be empty and decreased in release_inactive_stripe_list() when splice temp_inactive_list to conf->inactive_list. However, this may have a problem when raid5_get_active_stripe or stripe_add_to_batch_list was called, because these two functions may call list_del_init(&sh->lru) to delete sh from "conf->inactive_list + hash" which may cause "conf->inactive_list + hash" to be empty when atomic_inc_not_zero(&sh->count) got false. So a check should be done at these two point and increase empty_inactive_list_nr accordingly. Otherwise the counter may get to be negative number which would influence async readahead from VFS. Signed-off-by: ZhengYuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d189e894b921..e379b89fd8b1 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -659,6 +659,7 @@ raid5_get_active_stripe(struct r5conf *conf, sector_t sector, { struct stripe_head *sh; int hash = stripe_hash_locks_hash(sector); + int inc_empty_inactive_list_flag; pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector); @@ -703,7 +704,12 @@ raid5_get_active_stripe(struct r5conf *conf, sector_t sector, atomic_inc(&conf->active_stripes); BUG_ON(list_empty(&sh->lru) && !test_bit(STRIPE_EXPANDING, &sh->state)); + inc_empty_inactive_list_flag = 0; + if (!list_empty(conf->inactive_list + hash)) + inc_empty_inactive_list_flag = 1; list_del_init(&sh->lru); + if (list_empty(conf->inactive_list + hash) && inc_empty_inactive_list_flag) + atomic_inc(&conf->empty_inactive_list_nr); if (sh->group) { sh->group->stripes_cnt--; sh->group = NULL; @@ -762,6 +768,7 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh sector_t head_sector, tmp_sec; int hash; int dd_idx; + int inc_empty_inactive_list_flag; /* Don't cross chunks, so stripe pd_idx/qd_idx is the same */ tmp_sec = sh->sector; @@ -779,7 +786,12 @@ static void stripe_add_to_batch_list(struct r5conf *conf, struct stripe_head *sh atomic_inc(&conf->active_stripes); BUG_ON(list_empty(&head->lru) && !test_bit(STRIPE_EXPANDING, &head->state)); + inc_empty_inactive_list_flag = 0; + if (!list_empty(conf->inactive_list + hash)) + inc_empty_inactive_list_flag = 1; list_del_init(&head->lru); + if (list_empty(conf->inactive_list + hash) && inc_empty_inactive_list_flag) + atomic_inc(&conf->empty_inactive_list_nr); if (head->group) { head->group->stripes_cnt--; head->group = NULL; -- cgit v1.3-18-gd494 From 1bc8da4e143c0fd8807e061a66d91d5972601ab1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 4 Aug 2016 17:22:16 +0200 Subject: regmap: rbtree: Avoid overlapping nodes When searching for a suitable node that should be used for inserting a new register, which does not fall within the range of any existing node, we not only looks for nodes which are directly adjacent to the new register, but for nodes within a certain proximity. This is done to avoid creating lots of small nodes with just a few registers spacing in between, which would increase memory usage as well as tree traversal time. This means there might be multiple node candidates which fall within the proximity range of the new register. If we choose the first node we encounter, under certain register insertion patterns it is possible to end up with overlapping ranges. This will break order in the rbtree and can cause the cached register value to become corrupted. E.g. take the simplified example where the proximity range is 2 and the register insertion sequence is 1, 4, 2, 3, 5. * Insert of register 1 creates a new node, this is the root of the rbtree * Insert of register 4 creates a new node, which is inserted to the right of the root. * Insert of register 2 gets inserted to the first node * Insert of register 3 gets inserted to the first node * Insert of register 5 also gets inserted into the first node since this is the first node encountered and it is within the proximity range. Now there are two overlapping nodes. To avoid this always choose the node that is closest to the new register. This will ensure that nodes will not overlap. The tree traversal is still done as a binary search, we just don't stop at the first node found. So the complexity of the algorithm stays within the same order. Ideally if a new register is in the range of two adjacent blocks those blocks should be merged, but that is a much more invasive change and left for later. The issue was initially introduced in commit 472fdec7380c ("regmap: rbtree: Reduce number of nodes, take 2"), but became much more exposed by commit 6399aea629b0 ("regmap: rbtree: When adding a reg do a bsearch for target node") which changed the order in which nodes are looked-up. Fixes: 6399aea629b0 ("regmap: rbtree: When adding a reg do a bsearch for target node") Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/base/regmap/regcache-rbtree.c | 38 ++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index aa56af87d941..b11af3f2c1db 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -404,6 +404,7 @@ static int regcache_rbtree_write(struct regmap *map, unsigned int reg, unsigned int new_base_reg, new_top_reg; unsigned int min, max; unsigned int max_dist; + unsigned int dist, best_dist = UINT_MAX; max_dist = map->reg_stride * sizeof(*rbnode_tmp) / map->cache_word_size; @@ -423,24 +424,41 @@ static int regcache_rbtree_write(struct regmap *map, unsigned int reg, &base_reg, &top_reg); if (base_reg <= max && top_reg >= min) { - new_base_reg = min(reg, base_reg); - new_top_reg = max(reg, top_reg); - } else { - if (max < base_reg) - node = node->rb_left; + if (reg < base_reg) + dist = base_reg - reg; + else if (reg > top_reg) + dist = reg - top_reg; else - node = node->rb_right; - - continue; + dist = 0; + if (dist < best_dist) { + rbnode = rbnode_tmp; + best_dist = dist; + new_base_reg = min(reg, base_reg); + new_top_reg = max(reg, top_reg); + } } - ret = regcache_rbtree_insert_to_block(map, rbnode_tmp, + /* + * Keep looking, we want to choose the closest block, + * otherwise we might end up creating overlapping + * blocks, which breaks the rbtree. + */ + if (reg < base_reg) + node = node->rb_left; + else if (reg > top_reg) + node = node->rb_right; + else + break; + } + + if (rbnode) { + ret = regcache_rbtree_insert_to_block(map, rbnode, new_base_reg, new_top_reg, reg, value); if (ret) return ret; - rbtree_ctx->cached_rbnode = rbnode_tmp; + rbtree_ctx->cached_rbnode = rbnode; return 0; } -- cgit v1.3-18-gd494 From c3ccf357c3d75bd2924e049b6a991f7c0c111068 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 5 Aug 2016 10:17:52 +0200 Subject: spi: sh-msiof: Avoid invalid clock generator parameters The conversion from a look-up table to a calculation for clock generator parameters forgot to take into account that BRDV x 1/1 is valid only if BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary clock rates). This limitation is documented for the MSIOF module in all supported SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs. Tested on r8a7791/koelsch and r8a7795/salvator-x. Fixes: 65d5665bb260b034 ("spi: sh-msiof: Update calculation of frequency dividing") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 0f83ad1d5a58..1de3a772eb7d 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -262,6 +262,9 @@ static void sh_msiof_spi_set_clk_regs(struct sh_msiof_spi_priv *p, for (k = 0; k < ARRAY_SIZE(sh_msiof_spi_div_table); k++) { brps = DIV_ROUND_UP(div, sh_msiof_spi_div_table[k].div); + /* SCR_BRDV_DIV_1 is valid only if BRPS is x 1/1 or x 1/2 */ + if (sh_msiof_spi_div_table[k].div == 1 && brps > 2) + continue; if (brps <= 32) /* max of brdv is 32 */ break; } -- cgit v1.3-18-gd494 From 290284776bb281759b11faa287b8abccaf74bfcb Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 11 Jul 2016 14:50:07 -0700 Subject: regulator: qcom_smd: Fix voltage ranges for pm8x41 The voltage ranges listed here are wrong. The correct ranges can be seen in the "native" spmi regulator driver qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and boost_ranges[] for the pldo, ftsmps, and boost type regulators. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on pldos. Doing this allows us to specify a voltage like 3075000 for l24, whereas before that wasn't a supported voltage. Fixes: da65e367b67e ("regulator: Regulator driver for the Qualcomm RPM") Signed-off-by: Stephen Boyd Reviewed-by: Andy Gross Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 5022fa8d10c6..47cd28e960db 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -221,29 +221,30 @@ static const struct regulator_desc pm8x41_hfsmps = { static const struct regulator_desc pm8841_ftsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), - REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, .n_linear_ranges = 2, - .n_voltages = 340, + .n_voltages = 262, .ops = &rpm_smps_ldo_ops, }; static const struct regulator_desc pm8941_boost = { .linear_ranges = (struct regulator_linear_range[]) { - REGULATOR_LINEAR_RANGE(4000000, 0, 15, 100000), + REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000), }, .n_linear_ranges = 1, - .n_voltages = 16, + .n_voltages = 31, .ops = &rpm_smps_ldo_ops, }; static const struct regulator_desc pm8941_pldo = { .linear_ranges = (struct regulator_linear_range[]) { - REGULATOR_LINEAR_RANGE( 750000, 0, 30, 25000), - REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), + REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), + REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), }, - .n_linear_ranges = 2, - .n_voltages = 100, + .n_linear_ranges = 3, + .n_voltages = 164, .ops = &rpm_smps_ldo_ops, }; -- cgit v1.3-18-gd494 From c488f0071eacd10a290df4fb34bbdeb4eb8e7888 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 11 Jul 2016 14:50:08 -0700 Subject: regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldo The voltage ranges listed here are wrong. The pma8084 pldo supports three different overlapping voltage ranges with differing step sizes and the pma8084 ftsmps supports two. These ranges can be seen in the "native" spmi regulator driver (qcom_spmi-regulator.c) at pldo_ranges[] and ftsmps_ranges[] respectively. Port these ranges over to the RPM SMD regulator driver so that we list the appropriate set of supported voltages on these types of regulators. Fixes: ee01d0c91ef1 ("regulator: qcom-smd: Add support for PMA8084") Signed-off-by: Stephen Boyd Reviewed-by: Andy Gross Signed-off-by: Mark Brown --- drivers/regulator/qcom_smd-regulator.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 47cd28e960db..8ed46a9a55c8 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -178,20 +178,21 @@ static const struct regulator_desc pma8084_hfsmps = { static const struct regulator_desc pma8084_ftsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE(350000, 0, 184, 5000), - REGULATOR_LINEAR_RANGE(700000, 185, 339, 10000), + REGULATOR_LINEAR_RANGE(1280000, 185, 261, 10000), }, .n_linear_ranges = 2, - .n_voltages = 340, + .n_voltages = 262, .ops = &rpm_smps_ldo_ops, }; static const struct regulator_desc pma8084_pldo = { .linear_ranges = (struct regulator_linear_range[]) { - REGULATOR_LINEAR_RANGE(750000, 0, 30, 25000), - REGULATOR_LINEAR_RANGE(1500000, 31, 99, 50000), + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), + REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000), + REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000), }, - .n_linear_ranges = 2, - .n_voltages = 100, + .n_linear_ranges = 3, + .n_voltages = 164, .ops = &rpm_smps_ldo_ops, }; -- cgit v1.3-18-gd494 From d9dd26b20cff88b45d861ec786d86b1c9bd2ee60 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 30 Jul 2016 10:05:31 -0700 Subject: MD: hold mddev lock to change bitmap location Changing the location changes a lot of things. Holding the lock to avoid race. This makes the .quiesce called with mddev lock hold too. Acked-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/bitmap.c | 47 +++++++++++++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 6fff794e0c72..13041ee37ad6 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -2183,19 +2183,29 @@ location_show(struct mddev *mddev, char *page) static ssize_t location_store(struct mddev *mddev, const char *buf, size_t len) { + int rv; + rv = mddev_lock(mddev); + if (rv) + return rv; if (mddev->pers) { - if (!mddev->pers->quiesce) - return -EBUSY; - if (mddev->recovery || mddev->sync_thread) - return -EBUSY; + if (!mddev->pers->quiesce) { + rv = -EBUSY; + goto out; + } + if (mddev->recovery || mddev->sync_thread) { + rv = -EBUSY; + goto out; + } } if (mddev->bitmap || mddev->bitmap_info.file || mddev->bitmap_info.offset) { /* bitmap already configured. Only option is to clear it */ - if (strncmp(buf, "none", 4) != 0) - return -EBUSY; + if (strncmp(buf, "none", 4) != 0) { + rv = -EBUSY; + goto out; + } if (mddev->pers) { mddev->pers->quiesce(mddev, 1); bitmap_destroy(mddev); @@ -2214,21 +2224,25 @@ location_store(struct mddev *mddev, const char *buf, size_t len) /* nothing to be done */; else if (strncmp(buf, "file:", 5) == 0) { /* Not supported yet */ - return -EINVAL; + rv = -EINVAL; + goto out; } else { - int rv; if (buf[0] == '+') rv = kstrtoll(buf+1, 10, &offset); else rv = kstrtoll(buf, 10, &offset); if (rv) - return rv; - if (offset == 0) - return -EINVAL; + goto out; + if (offset == 0) { + rv = -EINVAL; + goto out; + } if (mddev->bitmap_info.external == 0 && mddev->major_version == 0 && - offset != mddev->bitmap_info.default_offset) - return -EINVAL; + offset != mddev->bitmap_info.default_offset) { + rv = -EINVAL; + goto out; + } mddev->bitmap_info.offset = offset; if (mddev->pers) { struct bitmap *bitmap; @@ -2245,7 +2259,7 @@ location_store(struct mddev *mddev, const char *buf, size_t len) mddev->pers->quiesce(mddev, 0); if (rv) { bitmap_destroy(mddev); - return rv; + goto out; } } } @@ -2257,6 +2271,11 @@ location_store(struct mddev *mddev, const char *buf, size_t len) set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); } + rv = 0; +out: + mddev_unlock(mddev); + if (rv) + return rv; return len; } -- cgit v1.3-18-gd494 From 11367799f3d12a5074c4a3c0fa4ea8da2a21a2a4 Mon Sep 17 00:00:00 2001 From: Alexey Obitotskiy Date: Wed, 3 Aug 2016 10:02:56 +0200 Subject: md: Prevent IO hold during accessing to faulty raid5 array After array enters in faulty state (e.g. number of failed drives becomes more then accepted for raid5 level) it sets error flags (one of this flags is MD_CHANGE_PENDING). For internal metadata arrays MD_CHANGE_PENDING cleared into md_update_sb, but not for external metadata arrays. MD_CHANGE_PENDING flag set prevents to finish all new or non-finished IOs to array and hold them in pending state. In some cases this can leads to deadlock situation. For example, we have faulty array (2 of 4 drives failed) and udev handle array state changes and blkid started (or other userspace application that used array to read/write) but unable to finish reads due to IO hold. At the same time we unable to get exclusive access to array (to stop array in our case) because another external application still use this array. Fix makes possible to return IO with errors immediately. So external application can finish working with array and give exclusive access to other applications to perform required management actions with array. Signed-off-by: Alexey Obitotskiy Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e379b89fd8b1..4f8f5242ea3b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4640,7 +4640,9 @@ finish: } if (!bio_list_empty(&s.return_bi)) { - if (test_bit(MD_CHANGE_PENDING, &conf->mddev->flags)) { + if (test_bit(MD_CHANGE_PENDING, &conf->mddev->flags) && + (s.failed <= conf->max_degraded || + conf->mddev->external == 0)) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->return_bi, &s.return_bi); spin_unlock_irq(&conf->device_lock); -- cgit v1.3-18-gd494 From 626d2f07de89bf6be3d7301524d0ab3375b81b9c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 4 Aug 2016 19:59:41 +0900 Subject: dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel() The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff32fa2 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Cc: # v4.1+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Vinod Koul --- drivers/dma/sh/usb-dmac.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c index 749f1bd5d65d..06ecdc38cee0 100644 --- a/drivers/dma/sh/usb-dmac.c +++ b/drivers/dma/sh/usb-dmac.c @@ -600,27 +600,30 @@ static irqreturn_t usb_dmac_isr_channel(int irq, void *dev) { struct usb_dmac_chan *chan = dev; irqreturn_t ret = IRQ_NONE; - u32 mask = USB_DMACHCR_TE; - u32 check_bits = USB_DMACHCR_TE | USB_DMACHCR_SP; + u32 mask = 0; u32 chcr; + bool xfer_end = false; spin_lock(&chan->vc.lock); chcr = usb_dmac_chan_read(chan, USB_DMACHCR); - if (chcr & check_bits) - mask |= USB_DMACHCR_DE | check_bits; + if (chcr & (USB_DMACHCR_TE | USB_DMACHCR_SP)) { + mask |= USB_DMACHCR_DE | USB_DMACHCR_TE | USB_DMACHCR_SP; + if (chcr & USB_DMACHCR_DE) + xfer_end = true; + ret |= IRQ_HANDLED; + } if (chcr & USB_DMACHCR_NULL) { /* An interruption of TE will happen after we set FTE */ mask |= USB_DMACHCR_NULL; chcr |= USB_DMACHCR_FTE; ret |= IRQ_HANDLED; } - usb_dmac_chan_write(chan, USB_DMACHCR, chcr & ~mask); + if (mask) + usb_dmac_chan_write(chan, USB_DMACHCR, chcr & ~mask); - if (chcr & check_bits) { + if (xfer_end) usb_dmac_isr_transfer_end(chan); - ret |= IRQ_HANDLED; - } spin_unlock(&chan->vc.lock); -- cgit v1.3-18-gd494 From 23540d6e2f3193b946c4de43e3f9654fa6d23fe7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Sun, 24 Jul 2016 14:10:58 +0200 Subject: memory: omap-gpmc: allow probe of child nodes to fail A recent commit (inadvertently?) changed how failed probe of a gpmc child node was handled. Instead of proceeding with setting up any other children as before, a single error now aborts the whole process. This change broke networking on some Overo boards due to probe failing for an unrelated nand node. This second issue should obviously be fixed, but let's restore the old behaviour of allowing child-node probe to fail to avoid further similar breakage on other systems. Fixes: d2d00862dfbb ("memory: omap-gpmc: Support general purpose input for WAITPINs") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Johan Hovold Signed-off-by: Roger Quadros --- drivers/memory/omap-gpmc.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 869c83fb3c5d..f00f3e742265 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -2185,7 +2185,7 @@ static int gpmc_probe_dt(struct platform_device *pdev) return 0; } -static int gpmc_probe_dt_children(struct platform_device *pdev) +static void gpmc_probe_dt_children(struct platform_device *pdev) { int ret; struct device_node *child; @@ -2200,11 +2200,11 @@ static int gpmc_probe_dt_children(struct platform_device *pdev) else ret = gpmc_probe_generic_child(pdev, child); - if (ret) - return ret; + if (ret) { + dev_err(&pdev->dev, "failed to probe DT child '%s': %d\n", + child->name, ret); + } } - - return 0; } #else static int gpmc_probe_dt(struct platform_device *pdev) @@ -2212,9 +2212,8 @@ static int gpmc_probe_dt(struct platform_device *pdev) return 0; } -static int gpmc_probe_dt_children(struct platform_device *pdev) +static void gpmc_probe_dt_children(struct platform_device *pdev) { - return 0; } #endif /* CONFIG_OF */ @@ -2369,16 +2368,10 @@ static int gpmc_probe(struct platform_device *pdev) goto setup_irq_failed; } - rc = gpmc_probe_dt_children(pdev); - if (rc < 0) { - dev_err(gpmc->dev, "failed to probe DT children\n"); - goto dt_children_failed; - } + gpmc_probe_dt_children(pdev); return 0; -dt_children_failed: - gpmc_free_irq(gpmc); setup_irq_failed: gpmc_gpio_exit(gpmc); gpio_init_failed: -- cgit v1.3-18-gd494 From 557e37c05f28bad113d65d584699e8d8f29f70a3 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 1 Jul 2016 17:41:59 +0800 Subject: bus: vexpress-config: add missing of_node_put after calling of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Lorenzo Pieralisi Acked-by: Liviu Dudau Signed-off-by: Peter Chen Signed-off-by: Sudeep Holla --- drivers/bus/vexpress-config.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c index c3cb76b363c6..9efdf1de4035 100644 --- a/drivers/bus/vexpress-config.c +++ b/drivers/bus/vexpress-config.c @@ -178,6 +178,7 @@ static int vexpress_config_populate(struct device_node *node) parent = class_find_device(vexpress_config_class, NULL, bridge, vexpress_config_node_match); + of_node_put(bridge); if (WARN_ON(!parent)) return -ENODEV; -- cgit v1.3-18-gd494 From b079bd555f6060cd6b435a1eb58ec3b8d255ebd0 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 4 Jul 2016 14:55:57 +0800 Subject: firmware: arm_scpi: add missing of_node_put after calling of_parse_phandle of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using it. Besides, of_address_to_resource always returns -EINVAL for error, delete the assignment for ret. Signed-off-by: Peter Chen Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 438893762076..ce2bc2a38101 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -709,9 +709,10 @@ static int scpi_probe(struct platform_device *pdev) struct mbox_client *cl = &pchan->cl; struct device_node *shmem = of_parse_phandle(np, "shmem", idx); - if (of_address_to_resource(shmem, 0, &res)) { + ret = of_address_to_resource(shmem, 0, &res); + of_node_put(shmem); + if (ret) { dev_err(dev, "failed to get SCPI payload mem resource\n"); - ret = -EINVAL; goto err; } -- cgit v1.3-18-gd494 From 7e196aa1a011da35a04cb1f161e186563aa8d8db Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jul 2016 12:18:34 +0000 Subject: clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup() In case of error, the functions clk_register_composite() and clk_register_divider() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-a10-pll2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi/clk-a10-pll2.c b/drivers/clk/sunxi/clk-a10-pll2.c index 0ee1f363e4be..d8eab90ae661 100644 --- a/drivers/clk/sunxi/clk-a10-pll2.c +++ b/drivers/clk/sunxi/clk-a10-pll2.c @@ -73,7 +73,7 @@ static void __init sun4i_pll2_setup(struct device_node *node, SUN4I_PLL2_PRE_DIV_WIDTH, CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, &sun4i_a10_pll2_lock); - if (!prediv_clk) { + if (IS_ERR(prediv_clk)) { pr_err("Couldn't register the prediv clock\n"); goto err_free_array; } @@ -106,7 +106,7 @@ static void __init sun4i_pll2_setup(struct device_node *node, &mult->hw, &clk_multiplier_ops, &gate->hw, &clk_gate_ops, CLK_SET_RATE_PARENT); - if (!base_clk) { + if (IS_ERR(base_clk)) { pr_err("Couldn't register the base multiplier clock\n"); goto err_free_multiplier; } -- cgit v1.3-18-gd494 From fbe359f12ce40e3126bea959b135656e4a305897 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jul 2016 12:21:47 +0000 Subject: clk: sunxi: Fix return value check in sun8i_a23_mbus_setup() In case of error, the function of_io_request_and_map() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-sun8i-mbus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c index 411d3033a96e..b200ebf159ee 100644 --- a/drivers/clk/sunxi/clk-sun8i-mbus.c +++ b/drivers/clk/sunxi/clk-sun8i-mbus.c @@ -48,7 +48,7 @@ static void __init sun8i_a23_mbus_setup(struct device_node *node) return; reg = of_io_request_and_map(node, 0, of_node_full_name(node)); - if (!reg) { + if (IS_ERR(reg)) { pr_err("Could not get registers for sun8i-mbus-clk\n"); goto err_free_parents; } -- cgit v1.3-18-gd494 From 156ad0d7eae4825a0d94a4bf68571e97302f2501 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 26 Jul 2016 15:04:23 +0800 Subject: clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock The condition passed to read*_poll_timeout() is the break condition, i.e. wait for this condition to happen and return success. The original code assumed the opposite, resulting in a warning when the PLL clock rate was changed but never lost it's lock as far as the readout indicated. This was verified by checking the read out register value. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c index fc17b5295e16..51d4bac97ab3 100644 --- a/drivers/clk/sunxi-ng/ccu_common.c +++ b/drivers/clk/sunxi-ng/ccu_common.c @@ -31,7 +31,7 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock) return; WARN_ON(readl_relaxed_poll_timeout(common->base + common->reg, reg, - !(reg & lock), 100, 70000)); + reg & lock, 100, 70000)); } int sunxi_ccu_probe(struct device_node *node, void __iomem *reg, -- cgit v1.3-18-gd494 From 06421a7821f9040467e0db2702309b72aa2b7af4 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 26 Jul 2016 15:04:24 +0800 Subject: clk: sunxi-ng: nk: Make ccu_nk_find_best static make C=2 reports: CHECK drivers/clk/sunxi-ng/ccu_nk.c drivers/clk/sunxi-ng/ccu_nk.c:17:6: warning: symbol 'ccu_nk_find_best' was not declared. Should it be static? ccu_nk_find_best is only used within ccu_nk.c. So make it static to get rid of this warning. Fixes: adbfb0056e03 ("clk: sunxi-ng: Add N-K-factor clock support") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu_nk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi-ng/ccu_nk.c b/drivers/clk/sunxi-ng/ccu_nk.c index 4470ffc8cf0d..d6fafb397489 100644 --- a/drivers/clk/sunxi-ng/ccu_nk.c +++ b/drivers/clk/sunxi-ng/ccu_nk.c @@ -14,9 +14,9 @@ #include "ccu_gate.h" #include "ccu_nk.h" -void ccu_nk_find_best(unsigned long parent, unsigned long rate, - unsigned int max_n, unsigned int max_k, - unsigned int *n, unsigned int *k) +static void ccu_nk_find_best(unsigned long parent, unsigned long rate, + unsigned int max_n, unsigned int max_k, + unsigned int *n, unsigned int *k) { unsigned long best_rate = 0; unsigned int best_k = 0, best_n = 0; -- cgit v1.3-18-gd494 From 764f21665a12e99f03124b4c8de722cdbff92213 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Aug 2016 17:45:33 +0100 Subject: spi: Drop io_mutex in error paths A couple of error paths were missing drops of io_mutex. Reported-by: Julia Lawall Signed-off-by: Mark Brown --- drivers/spi/spi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 51ad42fad567..57179d5eea9a 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1159,6 +1159,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread) if (ret < 0) { dev_err(&master->dev, "Failed to power device: %d\n", ret); + mutex_unlock(&master->io_mutex); return; } } @@ -1174,6 +1175,7 @@ static void __spi_pump_messages(struct spi_master *master, bool in_kthread) if (master->auto_runtime_pm) pm_runtime_put(master->dev.parent); + mutex_unlock(&master->io_mutex); return; } } -- cgit v1.3-18-gd494 From 6f4deb18a505523eb7925d646574a95f9e982ff7 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 8 Aug 2016 15:58:56 +0200 Subject: gpio: max730x: set gpiochip data pointer before using it gpiochip_add_data() has to be called before calling max7301_direction_input() [ 4.389883] Unable to handle kernel paging request for data at address 0x00000018 [ 4.397282] Faulting instruction address: 0xc01a8cbc [ 4.402023] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.407331] PREEMPT CMPC885 [ 4.410131] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-gacdfdee #39 [ 4.418592] Workqueue: deferwq deferred_probe_work_func [ 4.423711] task: c60798b0 ti: c608a000 task.ti: c608a000 [ 4.429038] NIP: c01a8cbc LR: c01a8e24 CTR: c01ff028 [ 4.433953] REGS: c608bad0 TRAP: 0300 Not tainted (4.5.0-s3k-dev-gacdfdee-svn-dirty) [ 4.441847] MSR: 00009032 CR: 33039553 XER: a000f940 [ 4.448395] DAR: 00000018 DSISR: c0000000 GPR00: c01a8e24 c608bb80 c60798b0 c60d6f6c 00000004 00000002 07de2900 00700000 GPR08: 00000000 00000000 c608a000 00001032 35039553 00000000 c002f37c c6010b64 GPR16: c6010a48 c6010a14 c6010a00 00000000 c0450000 c0453568 c0453438 c050db14 GPR24: c62662bc 00000009 ffffffaa c60d6f5d 00000001 00000000 00000000 00000000 [ 4.480371] NIP [c01a8cbc] max7301_direction_input+0x20/0x9c [ 4.485951] LR [c01a8e24] __max730x_probe+0xec/0x138 [ 4.490812] Call Trace: [ 4.493268] [c608bba0] [c01a8e24] __max730x_probe+0xec/0x138 [ 4.498878] [c608bbc0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.504895] [c608bbf0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.510489] [c608bc20] [c01cc04c] __device_attach+0x8c/0x110 [ 4.516082] [c608bc50] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.521673] [c608bc70] [c01c96c8] device_add+0x3c0/0x598 [ 4.526925] [c608bcb0] [c0200f90] spi_add_device+0x114/0x160 [ 4.532512] [c608bcd0] [c02018d0] spi_register_master+0x6e0/0x7c8 [ 4.538537] [c608bd20] [c02019fc] devm_spi_register_master+0x44/0x8c [ 4.544824] [c608bd40] [c0203854] of_fsl_spi_probe+0x458/0x57c [ 4.550587] [c608bda0] [c01cd828] platform_drv_probe+0x30/0x74 [ 4.556366] [c608bdb0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.562383] [c608bde0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.567977] [c608be10] [c01cc04c] __device_attach+0x8c/0x110 [ 4.573572] [c608be40] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.579170] [c608be60] [c01cb9b4] deferred_probe_work_func+0xa4/0xc4 [ 4.585438] [c608be80] [c0029c04] process_one_work+0x22c/0x414 [ 4.591201] [c608bea0] [c002a100] worker_thread+0x314/0x5c0 [ 4.596722] [c608bef0] [c002f444] kthread+0xc8/0xcc [ 4.601538] [c608bf40] [c000af84] ret_from_kernel_thread+0x5c/0x64 [ 4.607596] Instruction dump: [ 4.610530] 7c0803a6 bba10014 38210020 4e800020 7c0802a6 9421ffe0 38840004 bf810010 [ 4.618188] 90010024 549cf0be 83c30010 549d0f7c <813e0018> 7fc3f378 7d3f2430 57ff07fe [ 4.626041] ---[ end trace 303adb021dd4caf2 ]--- Cc: stable@vger.kernel.org fixes: 5e45e01916197 ("gpio: max730x: use gpiochip data pointer") Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij --- drivers/gpio/gpio-max730x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c index 08807368f007..946d09195598 100644 --- a/drivers/gpio/gpio-max730x.c +++ b/drivers/gpio/gpio-max730x.c @@ -192,6 +192,10 @@ int __max730x_probe(struct max7301 *ts) ts->chip.parent = dev; ts->chip.owner = THIS_MODULE; + ret = gpiochip_add_data(&ts->chip, ts); + if (ret) + goto exit_destroy; + /* * initialize pullups according to platform data and cache the * register values for later use. @@ -213,10 +217,6 @@ int __max730x_probe(struct max7301 *ts) } } - ret = gpiochip_add_data(&ts->chip, ts); - if (ret) - goto exit_destroy; - return ret; exit_destroy: -- cgit v1.3-18-gd494 From ed0ab110235c659fdb3f73d27907b1b45b89cf30 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 14 Jul 2016 10:42:35 +0800 Subject: clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock The condition passed to read*_poll_timeout() is the break condition, i.e. wait for this condition to happen and return success. The original code assumed the opposite, resulting in a warning when the PLL clock rate was changed but never lost it's lock as far as the readout indicated. This was verified by checking the read out register value. Fixes: 1d80c14248d6 ("clk: sunxi-ng: Add common infrastructure") Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Stephen Boyd --- drivers/clk/sunxi-ng/ccu_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi-ng/ccu_common.c b/drivers/clk/sunxi-ng/ccu_common.c index fc17b5295e16..51d4bac97ab3 100644 --- a/drivers/clk/sunxi-ng/ccu_common.c +++ b/drivers/clk/sunxi-ng/ccu_common.c @@ -31,7 +31,7 @@ void ccu_helper_wait_for_lock(struct ccu_common *common, u32 lock) return; WARN_ON(readl_relaxed_poll_timeout(common->base + common->reg, reg, - !(reg & lock), 100, 70000)); + reg & lock, 100, 70000)); } int sunxi_ccu_probe(struct device_node *node, void __iomem *reg, -- cgit v1.3-18-gd494 From 9b4b3f6a062b22550e62523efe5213776cdd426b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 11 Aug 2016 07:26:01 -0700 Subject: ahci: disable correct irq for dummy ports irq already contains the interrupt number for the port, don't add the port index to it. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo Fixes: d684a90d38e2 ("ahci: per-port msix support") Cc: stable@vger.kernel.org v4.5+ --- drivers/ata/libahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 7461a587b39b..dcf2c724fd06 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2524,7 +2524,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, /* Do not receive interrupts sent by dummy ports */ if (!pp) { - disable_irq(irq + i); + disable_irq(irq); continue; } -- cgit v1.3-18-gd494 From a3f457d9636b3f5ae4fc6502cb0c95f60f5e342b Mon Sep 17 00:00:00 2001 From: Chris Zhong Date: Tue, 9 Aug 2016 11:02:33 -0700 Subject: clk: rockchip: fix rk3399 aclk_vio gate bit Fix incorrect rk3399 aclk_vio gating bit, it should be 0, not 10. Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Chris Zhong Reviewed-by: Xing Zheng Reviewed-by: Guenter Roeck Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index c109d80e7a8a..314eab67bc0f 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1071,7 +1071,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { /* vio */ COMPOSITE(ACLK_VIO, "aclk_vio", mux_pll_src_cpll_gpll_ppll_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS, - RK3399_CLKGATE_CON(11), 10, GFLAGS), + RK3399_CLKGATE_CON(11), 0, GFLAGS), COMPOSITE_NOMUX(PCLK_VIO, "pclk_vio", "aclk_vio", 0, RK3399_CLKSEL_CON(43), 0, 5, DFLAGS, RK3399_CLKGATE_CON(11), 1, GFLAGS), -- cgit v1.3-18-gd494 From e0cb1b84163720ec67ff0e54397fd3f57ad4a4dd Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 10 Aug 2016 09:29:43 +0200 Subject: clk: renesas: r8a7795: Fix SD clocks According to the datasheet, SDn clocks are from the SDSRC clock. And the SDSRC has a 1/2 divider. So, we should have ".sdsrc" as an internal core clock. Otherwise, since the sdhi driver will calculate clock for a sd card using the wrong parent clock rate, and then performance will be not good. Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Yoshihiro Shimoda Acked-by: Dirk Behme Tested-by: Wolfram Sang Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/renesas/r8a7795-cpg-mssr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index d359c92e13a6..e38bf60c0ff4 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -69,6 +69,7 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1), DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), /* Core Clock Outputs */ DEF_FIXED("ztr", R8A7795_CLK_ZTR, CLK_PLL1_DIV2, 6, 1), @@ -87,10 +88,10 @@ static const struct cpg_core_clk r8a7795_core_clks[] __initconst = { DEF_FIXED("s3d2", R8A7795_CLK_S3D2, CLK_S3, 2, 1), DEF_FIXED("s3d4", R8A7795_CLK_S3D4, CLK_S3, 4, 1), - DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_PLL1_DIV2, 0x0074), - DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_PLL1_DIV2, 0x0078), - DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_PLL1_DIV2, 0x0268), - DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_PLL1_DIV2, 0x026c), + DEF_GEN3_SD("sd0", R8A7795_CLK_SD0, CLK_SDSRC, 0x0074), + DEF_GEN3_SD("sd1", R8A7795_CLK_SD1, CLK_SDSRC, 0x0078), + DEF_GEN3_SD("sd2", R8A7795_CLK_SD2, CLK_SDSRC, 0x0268), + DEF_GEN3_SD("sd3", R8A7795_CLK_SD3, CLK_SDSRC, 0x026c), DEF_FIXED("cl", R8A7795_CLK_CL, CLK_PLL1_DIV2, 48, 1), DEF_FIXED("cp", R8A7795_CLK_CP, CLK_EXTAL, 2, 1), -- cgit v1.3-18-gd494 From 20c389e656a89e2302017bf3f499cb5a31a2a7ba Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Tue, 2 Aug 2016 15:19:58 +0800 Subject: clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 Dues to incorrect diagram, we need to fix incorrect bits for (c/g)pll_aclk_emmc_src: cpll_aclk_emmc_src --> G6[13] gpll_aclk_emmc_src --> G6[12] Fixes: 115510053e5e ("clk: rockchip: add clock controller for the RK3399") Signed-off-by: Xing Zheng Reviewed-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 314eab67bc0f..01fa60ebd6d4 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -923,9 +923,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(6), 14, GFLAGS), GATE(0, "cpll_aclk_emmc_src", "cpll", CLK_IGNORE_UNUSED, - RK3399_CLKGATE_CON(6), 12, GFLAGS), - GATE(0, "gpll_aclk_emmc_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(6), 13, GFLAGS), + GATE(0, "gpll_aclk_emmc_src", "gpll", CLK_IGNORE_UNUSED, + RK3399_CLKGATE_CON(6), 12, GFLAGS), COMPOSITE_NOGATE(ACLK_EMMC, "aclk_emmc", mux_aclk_emmc_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(21), 7, 1, MFLAGS, 0, 5, DFLAGS), GATE(ACLK_EMMC_CORE, "aclk_emmccore", "aclk_emmc", CLK_IGNORE_UNUSED, -- cgit v1.3-18-gd494 From b33ecca87df99fa6fff8a1d455de96f436934dcf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 8 Aug 2016 21:55:39 +0200 Subject: phy-sun4i-usb: Add support for peripheral-only mode Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode from the musb controller node instead of assuming that having an id_det gpio means otg mode, and not having one means host mode. Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det helper which looks at the dr_mode, always registering our extcon and always monitoring vbus. If dr_mode is not specified in the dts, do not register phy0 as we then do not know how to treat it. This is actually a good thing as this means we will not be registering phy0 on devices where the otg controller is not enabled in the devicetree. Signed-off-by: Hans de Goede Acked-by: Kishon Vijay Abraham I Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 68 ++++++++++++++++++++++++++++++--------------- 1 file changed, 46 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 0a45bc6088ae..8c7eb335622e 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #define REG_ISCR 0x00 @@ -110,6 +111,7 @@ struct sun4i_usb_phy_cfg { struct sun4i_usb_phy_data { void __iomem *base; const struct sun4i_usb_phy_cfg *cfg; + enum usb_dr_mode dr_mode; struct mutex mutex; struct sun4i_usb_phy { struct phy *phy; @@ -120,6 +122,7 @@ struct sun4i_usb_phy_data { bool regulator_on; int index; } phys[MAX_PHYS]; + int first_phy; /* phy0 / otg related variables */ struct extcon_dev *extcon; bool phy0_init; @@ -285,16 +288,10 @@ static int sun4i_usb_phy_init(struct phy *_phy) sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_DPDM_PULLUP_EN); sun4i_usb_phy0_update_iscr(_phy, 0, ISCR_ID_PULLUP_EN); - if (data->id_det_gpio) { - /* OTG mode, force ISCR and cable state updates */ - data->id_det = -1; - data->vbus_det = -1; - queue_delayed_work(system_wq, &data->detect, 0); - } else { - /* Host only mode */ - sun4i_usb_phy0_set_id_detect(_phy, 0); - sun4i_usb_phy0_set_vbus_detect(_phy, 1); - } + /* Force ISCR and cable state updates */ + data->id_det = -1; + data->vbus_det = -1; + queue_delayed_work(system_wq, &data->detect, 0); } return 0; @@ -319,6 +316,19 @@ static int sun4i_usb_phy_exit(struct phy *_phy) return 0; } +static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data) +{ + switch (data->dr_mode) { + case USB_DR_MODE_OTG: + return gpiod_get_value_cansleep(data->id_det_gpio); + case USB_DR_MODE_HOST: + return 0; + case USB_DR_MODE_PERIPHERAL: + default: + return 1; + } +} + static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data) { if (data->vbus_det_gpio) @@ -432,7 +442,10 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) struct phy *phy0 = data->phys[0].phy; int id_det, vbus_det, id_notify = 0, vbus_notify = 0; - id_det = gpiod_get_value_cansleep(data->id_det_gpio); + if (phy0 == NULL) + return; + + id_det = sun4i_usb_phy0_get_id_det(data); vbus_det = sun4i_usb_phy0_get_vbus_det(data); mutex_lock(&phy0->mutex); @@ -448,7 +461,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough for * the musb-ip to end the current device session. */ - if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { + if (data->dr_mode == USB_DR_MODE_OTG && + !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(200); sun4i_usb_phy0_set_vbus_detect(phy0, 1); @@ -474,7 +488,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough to * the musb-ip to end the current host session. */ - if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { + if (data->dr_mode == USB_DR_MODE_OTG && + !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { mutex_lock(&phy0->mutex); sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(1000); @@ -519,7 +534,8 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev, { struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); - if (args->args[0] >= data->cfg->num_phys) + if (args->args[0] < data->first_phy || + args->args[0] >= data->cfg->num_phys) return ERR_PTR(-ENODEV); return data->phys[args->args[0]].phy; @@ -593,13 +609,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - /* vbus_det without id_det makes no sense, and is not supported */ - if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) { - dev_err(dev, "usb0_id_det missing or invalid\n"); - return -ENODEV; - } - - if (data->id_det_gpio) { + data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0); + switch (data->dr_mode) { + case USB_DR_MODE_OTG: + /* otg without id_det makes no sense, and is not supported */ + if (!data->id_det_gpio) { + dev_err(dev, "usb0_id_det missing or invalid\n"); + return -ENODEV; + } + /* fall through */ + case USB_DR_MODE_HOST: + case USB_DR_MODE_PERIPHERAL: data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable); if (IS_ERR(data->extcon)) @@ -610,9 +630,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) dev_err(dev, "failed to register extcon: %d\n", ret); return ret; } + break; + default: + dev_info(dev, "dr_mode unknown, not registering usb phy0\n"); + data->first_phy = 1; } - for (i = 0; i < data->cfg->num_phys; i++) { + for (i = data->first_phy; i < data->cfg->num_phys; i++) { struct sun4i_usb_phy *phy = data->phys + i; char name[16]; -- cgit v1.3-18-gd494 From bf8ca651e1f8f054b39b6b3b95d6f515c3c857d5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 10 Aug 2016 18:04:44 +0800 Subject: phy: brcm-sata: Return proper error if brcm_sata_phy_init fails Return proper error instead of 0 if brcm_sata_phy_init fails. Signed-off-by: Axel Lin Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-brcm-sata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/phy-brcm-sata.c index 18d662610075..8ffc44afdb75 100644 --- a/drivers/phy/phy-brcm-sata.c +++ b/drivers/phy/phy-brcm-sata.c @@ -367,7 +367,7 @@ static int brcm_sata_phy_init(struct phy *phy) rc = -ENODEV; }; - return 0; + return rc; } static const struct phy_ops phy_ops = { -- cgit v1.3-18-gd494 From 017300da3a4547d85e52c2484fc0bd759e1bbcdb Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 6 Jul 2016 08:00:06 +0200 Subject: phy: sun9i-usb: fix error handling This is likely that checking 'phy->hsic_clk' instead of 'phy->clk' is expected here. Signed-off-by: Christophe JAILLET Acked-by: Chen-Yu Tsai --- drivers/phy/phy-sun9i-usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i-usb.c index ac4f31abefe3..28fce4bce638 100644 --- a/drivers/phy/phy-sun9i-usb.c +++ b/drivers/phy/phy-sun9i-usb.c @@ -141,9 +141,9 @@ static int sun9i_usb_phy_probe(struct platform_device *pdev) } phy->hsic_clk = devm_clk_get(dev, "hsic_12M"); - if (IS_ERR(phy->clk)) { + if (IS_ERR(phy->hsic_clk)) { dev_err(dev, "failed to get hsic_12M clock\n"); - return PTR_ERR(phy->clk); + return PTR_ERR(phy->hsic_clk); } phy->reset = devm_reset_control_get(dev, "hsic"); -- cgit v1.3-18-gd494 From 4608d96fb491125657fd8183a35921e4d4e27bc8 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Tue, 2 Aug 2016 15:19:57 +0800 Subject: clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 Sorry to refer incorrect clock diagram, we double check it that the bits configuration of the Xpll_aclk_perihp_src need to be fixed: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Through the testing that plug/unplug the USB ethernet cable on the RK3399 kevin board. 1. the hclk_host0 and hclk_host1 are endpoint clocks: cpll --> G5[1] --> aclk_perihp_cpll_src --\ |--> hclk_host0 | --> ... ---> | gpll --> G5[0] --> aclk_perihp_gpll_src --/ |--> hclk_host1 2. there is no clock below the cpll_aclk_perihp_src, and the hclk_hostX are below the gpll_aclk_perihp_src: pll_cpll 1 1 800000000 0 0 cpll 7 19 800000000 0 0 cpll_aclk_perihp_src 0 0 800000000 0 0 ... pll_gpll 1 1 594000000 0 0 gpll 10 10 594000000 0 0 gpll_aclk_perihp_src 2 2 594000000 0 0 hclk_perihp 5 5 74250000 0 0 hclk_host1_arb 2 2 74250000 0 0 hclk_host1 2 2 74250000 0 0 hclk_host0_arb 2 2 74250000 0 0 hclk_host0 2 2 74250000 0 0 3. by default, G5[0] and G5[1] are enabled: localhost ~ # mem r 0xff760314 0x000003e0 4. close the G5[1] (aclk_perihp_cpll_src), and plug/unplug USB ethernet cable, the DUT still works well: localhost ~ # mem w 0xff760314 0xffff03e2 localhost ~ # mem r 0xff760314 0x000003e2 plug/unplug, the work statue is ok 5. close the G5[0] (aclk_perihp_gpll_src), , and plug/unplug USB ethernet cable, the DUT will be crashed: localhost ~ # mem w 0xff760314 0xffff03e1 localhost ~ # mem r 0xff760314 0x000003e1 plug/unplug, the DUT is crashed Summary: bit 1 - shows aclk_perihp_cpll_src_en bit 0 - shows aclk_perihp_gpll_src_en Fixes: 3bd14ae9da91 ("clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src") Signed-off-by: Xing Zheng [here the clock-documentation in the manual was actually stating the wrong bits and thus only Xing's testing above revealed the issue] Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 01fa60ebd6d4..ec5b2fd77c50 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -833,9 +833,9 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { /* perihp */ GATE(0, "cpll_aclk_perihp_src", "cpll", CLK_IGNORE_UNUSED, - RK3399_CLKGATE_CON(5), 0, GFLAGS), - GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, RK3399_CLKGATE_CON(5), 1, GFLAGS), + GATE(0, "gpll_aclk_perihp_src", "gpll", CLK_IGNORE_UNUSED, + RK3399_CLKGATE_CON(5), 0, GFLAGS), COMPOSITE(ACLK_PERIHP, "aclk_perihp", mux_aclk_perihp_p, CLK_IGNORE_UNUSED, RK3399_CLKSEL_CON(14), 7, 1, MFLAGS, 0, 5, DFLAGS, RK3399_CLKGATE_CON(5), 2, GFLAGS), -- cgit v1.3-18-gd494 From 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 12 Aug 2016 01:05:08 +0300 Subject: USB: serial: mos7720: fix non-atomic allocation in write path There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7720.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 5608af4a369d..de9992b492b0 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1252,7 +1252,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } -- cgit v1.3-18-gd494 From 3b7c7e52efda0d4640060de747768360ba70a7c0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 12 Aug 2016 01:05:09 +0300 Subject: USB: serial: mos7840: fix non-atomic allocation in write path There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/mos7840.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index ed378fb232e7..57426d703a09 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1340,8 +1340,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } -- cgit v1.3-18-gd494 From 7ef9153d9af5fe7ce32dcc0f558bfcfc3d2b3016 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 15 Aug 2016 15:17:41 +0200 Subject: misc: delete bh1780 driver The Rohm BH1780 ambient light sensor has a new driver with extended functionality (proper runtime PM) in the appropriate framework IIO, it can be found at: drivers/iio/light/bh1780.c The MISC driver symbol CONFIG_SENSORS_BH1780 does not appear in any defconfigs, so it should safe to delete. Cc: Hemanth V Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 10 -- drivers/misc/Makefile | 1 - drivers/misc/bh1780gli.c | 259 ----------------------------------------------- 3 files changed, 270 deletions(-) delete mode 100644 drivers/misc/bh1780gli.c (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a216b4667742..d00252828966 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -345,16 +345,6 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config SENSORS_BH1780 - tristate "ROHM BH1780GLI ambient light sensor" - depends on I2C && SYSFS - help - If you say yes here you get support for the ROHM BH1780GLI - ambient light sensor. - - This driver can also be built as a module. If so, the module - will be called bh1780gli. - config SENSORS_BH1770 tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" depends on I2C diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7410c6d9a34d..fb32516ddfe2 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o -obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o obj-$(CONFIG_SGI_IOC4) += ioc4.o diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c deleted file mode 100644 index 7f90ce5a569a..000000000000 --- a/drivers/misc/bh1780gli.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * bh1780gli.c - * ROHM Ambient Light Sensor Driver - * - * Copyright (C) 2010 Texas Instruments - * Author: Hemanth V - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ -#include -#include -#include -#include -#include -#include -#include - -#define BH1780_REG_CONTROL 0x80 -#define BH1780_REG_PARTID 0x8A -#define BH1780_REG_MANFID 0x8B -#define BH1780_REG_DLOW 0x8C -#define BH1780_REG_DHIGH 0x8D - -#define BH1780_REVMASK (0xf) -#define BH1780_POWMASK (0x3) -#define BH1780_POFF (0x0) -#define BH1780_PON (0x3) - -/* power on settling time in ms */ -#define BH1780_PON_DELAY 2 - -struct bh1780_data { - struct i2c_client *client; - int power_state; - /* lock for sysfs operations */ - struct mutex lock; -}; - -static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) -{ - int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); - if (ret < 0) - dev_err(&ddata->client->dev, - "i2c_smbus_write_byte_data failed error %d Register (%s)\n", - ret, msg); - return ret; -} - -static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) -{ - int ret = i2c_smbus_read_byte_data(ddata->client, reg); - if (ret < 0) - dev_err(&ddata->client->dev, - "i2c_smbus_read_byte_data failed error %d Register (%s)\n", - ret, msg); - return ret; -} - -static ssize_t bh1780_show_lux(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - int lsb, msb; - - lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW"); - if (lsb < 0) - return lsb; - - msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH"); - if (msb < 0) - return msb; - - return sprintf(buf, "%d\n", (msb << 8) | lsb); -} - -static ssize_t bh1780_show_power_state(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - int state; - - state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); - if (state < 0) - return state; - - return sprintf(buf, "%d\n", state & BH1780_POWMASK); -} - -static ssize_t bh1780_store_power_state(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct platform_device *pdev = to_platform_device(dev); - struct bh1780_data *ddata = platform_get_drvdata(pdev); - unsigned long val; - int error; - - error = kstrtoul(buf, 0, &val); - if (error) - return error; - - if (val < BH1780_POFF || val > BH1780_PON) - return -EINVAL; - - mutex_lock(&ddata->lock); - - error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL"); - if (error < 0) { - mutex_unlock(&ddata->lock); - return error; - } - - msleep(BH1780_PON_DELAY); - ddata->power_state = val; - mutex_unlock(&ddata->lock); - - return count; -} - -static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL); - -static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, - bh1780_show_power_state, bh1780_store_power_state); - -static struct attribute *bh1780_attributes[] = { - &dev_attr_power_state.attr, - &dev_attr_lux.attr, - NULL -}; - -static const struct attribute_group bh1780_attr_group = { - .attrs = bh1780_attributes, -}; - -static int bh1780_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int ret; - struct bh1780_data *ddata; - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - return -EIO; - - ddata = devm_kzalloc(&client->dev, sizeof(struct bh1780_data), - GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - ddata->client = client; - i2c_set_clientdata(client, ddata); - - ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID"); - if (ret < 0) - return ret; - - dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n", - (ret & BH1780_REVMASK)); - - mutex_init(&ddata->lock); - - return sysfs_create_group(&client->dev.kobj, &bh1780_attr_group); -} - -static int bh1780_remove(struct i2c_client *client) -{ - sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int bh1780_suspend(struct device *dev) -{ - struct bh1780_data *ddata; - int state, ret; - struct i2c_client *client = to_i2c_client(dev); - - ddata = i2c_get_clientdata(client); - state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL"); - if (state < 0) - return state; - - ddata->power_state = state & BH1780_POWMASK; - - ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF, - "CONTROL"); - - if (ret < 0) - return ret; - - return 0; -} - -static int bh1780_resume(struct device *dev) -{ - struct bh1780_data *ddata; - int state, ret; - struct i2c_client *client = to_i2c_client(dev); - - ddata = i2c_get_clientdata(client); - state = ddata->power_state; - ret = bh1780_write(ddata, BH1780_REG_CONTROL, state, - "CONTROL"); - - if (ret < 0) - return ret; - - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - -static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume); - -static const struct i2c_device_id bh1780_id[] = { - { "bh1780", 0 }, - { }, -}; - -MODULE_DEVICE_TABLE(i2c, bh1780_id); - -#ifdef CONFIG_OF -static const struct of_device_id of_bh1780_match[] = { - { .compatible = "rohm,bh1780gli", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, of_bh1780_match); -#endif - -static struct i2c_driver bh1780_driver = { - .probe = bh1780_probe, - .remove = bh1780_remove, - .id_table = bh1780_id, - .driver = { - .name = "bh1780", - .pm = &bh1780_pm, - .of_match_table = of_match_ptr(of_bh1780_match), - }, -}; - -module_i2c_driver(bh1780_driver); - -MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Hemanth V "); -- cgit v1.3-18-gd494 From bb9947c3a14e781eb0f137728e7e55ec8d848991 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 14 Jul 2016 11:06:11 +0000 Subject: iio: pressure: bmp280: fix wrong pointer passed to PTR_ERR() PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Signed-off-by: Wei Yongjun Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 6943688e66df..94e27b2600f3 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -970,7 +970,7 @@ int bmp280_common_probe(struct device *dev, data->vdda = devm_regulator_get(dev, "vdda"); if (IS_ERR(data->vdda)) { dev_err(dev, "failed to get VDDA regulator\n"); - ret = PTR_ERR(data->vddd); + ret = PTR_ERR(data->vdda); goto out_disable_vddd; } ret = regulator_enable(data->vdda); -- cgit v1.3-18-gd494 From 776b645315d372e06e46167194605d308aa1a790 Mon Sep 17 00:00:00 2001 From: Phil Turnbull Date: Thu, 21 Jul 2016 11:23:13 -0400 Subject: staging: iio: ad5933: Return correct value for AD5933_OUT_RANGE. The 'break' statement after calling ad5933_cmd only breaks out of the 'for' loop, which then unconditionally sets the return value to -EINVAL. Move the initialisation of 'ret' so we return the correct value. Signed-off-by: Phil Turnbull Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 170ac980abcb..24c348d2f5bb 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -419,6 +419,7 @@ static ssize_t ad5933_store(struct device *dev, mutex_lock(&indio_dev->mlock); switch ((u32)this_attr->address) { case AD5933_OUT_RANGE: + ret = -EINVAL; for (i = 0; i < 4; i++) if (val == st->range_avail[i]) { st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3); @@ -426,7 +427,6 @@ static ssize_t ad5933_store(struct device *dev, ret = ad5933_cmd(st, 0); break; } - ret = -EINVAL; break; case AD5933_IN_PGA_GAIN: if (sysfs_streq(buf, "1")) { -- cgit v1.3-18-gd494 From 7d3cc21dab5313a02f2f3ca8164529b828a030d1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jul 2016 13:54:17 +0200 Subject: iio: ad799x: Fix buffered capture for ad7991/ad7995/ad7999 The data buffer for captured mode for the ad799x driver is allocated in the update_scan_mode() callback. This callback is not set in the iio_info struct for the ad7791/ad7995/ad7999, which means that the data buffer is not allocated when a captured transfer is started. As a result the driver crashes when the first sample is received. To fix this properly set the update_scan_mode() callback. Fixes: d8dca33027c1 ("staging:iio:ad799x: Preallocate sample buffer") Signed-off-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad799x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index b6163764489c..9704090b7908 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -527,6 +527,7 @@ static struct attribute_group ad799x_event_attrs_group = { static const struct iio_info ad7991_info = { .read_raw = &ad799x_read_raw, .driver_module = THIS_MODULE, + .update_scan_mode = ad799x_update_scan_mode, }; static const struct iio_info ad7993_4_7_8_noirq_info = { -- cgit v1.3-18-gd494 From b234f683dde97aebb7009c6aecab651d32ad70b4 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:25:07 -0700 Subject: iio: accel: bma220_spi: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-By: Tiberiu Breana Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bma220_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c index 1098d10df8e8..5099f295dd37 100644 --- a/drivers/iio/accel/bma220_spi.c +++ b/drivers/iio/accel/bma220_spi.c @@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi) if (ret < 0) return ret; - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, bma220_trigger_handler, NULL); if (ret < 0) { dev_err(&spi->dev, "iio triggered buffer setup failed\n"); -- cgit v1.3-18-gd494 From 3c68858df7c2f0c4c343bb4702733fe827491f9e Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:26:13 -0700 Subject: iio: humidity: am2315: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Reviewed-By: Tiberiu Breana Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/am2315.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c index 3e200f69e886..ff96b6d0fdae 100644 --- a/drivers/iio/humidity/am2315.c +++ b/drivers/iio/humidity/am2315.c @@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client, indio_dev->channels = am2315_channels; indio_dev->num_channels = ARRAY_SIZE(am2315_channels); - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, am2315_trigger_handler, NULL); if (ret < 0) { dev_err(&client->dev, "iio triggered buffer setup failed\n"); -- cgit v1.3-18-gd494 From f8adf645db03345af2d9a8b6095b02327ea50885 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 11 Jul 2016 08:26:56 -0700 Subject: iio: proximity: as3935: set up buffer timestamps for non-zero values Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/as3935.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 2e3a70e1b245..5656deb17261 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -397,7 +397,7 @@ static int as3935_probe(struct spi_device *spi) return ret; } - ret = iio_triggered_buffer_setup(indio_dev, NULL, + ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time, &as3935_trigger_handler, NULL); if (ret) { -- cgit v1.3-18-gd494 From 45e98152850c36560484f3fa3bb857a4bfe1a419 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Tue, 19 Jul 2016 12:25:00 -0400 Subject: iio: stx104: Unregister IIO device on remove callback The devm_iio_device_register function should not be used if custom operations must be performed in the remove callback. This patch replaces the dem_iio_device_register call with a iio_device_register call and respective iio_device_unregister call in the remove callback. Fixes: 765550e4d98d ("iio: stx104: Add GPIO support for the Apex Embedded Systems STX104") Signed-off-by: William Breathitt Gray Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/dac/stx104.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c index 792a97164cb2..bebbd00304ce 100644 --- a/drivers/iio/dac/stx104.c +++ b/drivers/iio/dac/stx104.c @@ -65,6 +65,16 @@ struct stx104_gpio { unsigned int out_state; }; +/** + * struct stx104_dev - STX104 device private data structure + * @indio_dev: IIO device + * @chip: instance of the gpio_chip + */ +struct stx104_dev { + struct iio_dev *indio_dev; + struct gpio_chip *chip; +}; + static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -107,6 +117,7 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { static int stx104_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) { + /* GPIO 0-3 are input only, while the rest are output only */ if (offset < 4) return 1; @@ -169,6 +180,7 @@ static int stx104_probe(struct device *dev, unsigned int id) struct iio_dev *indio_dev; struct stx104_iio *priv; struct stx104_gpio *stx104gpio; + struct stx104_dev *stx104dev; int err; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); @@ -179,6 +191,10 @@ static int stx104_probe(struct device *dev, unsigned int id) if (!stx104gpio) return -ENOMEM; + stx104dev = devm_kzalloc(dev, sizeof(*stx104dev), GFP_KERNEL); + if (!stx104dev) + return -ENOMEM; + if (!devm_request_region(dev, base[id], STX104_EXTENT, dev_name(dev))) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", @@ -199,12 +215,6 @@ static int stx104_probe(struct device *dev, unsigned int id) outw(0, base[id] + 4); outw(0, base[id] + 6); - err = devm_iio_device_register(dev, indio_dev); - if (err) { - dev_err(dev, "IIO device registering failed (%d)\n", err); - return err; - } - stx104gpio->chip.label = dev_name(dev); stx104gpio->chip.parent = dev; stx104gpio->chip.owner = THIS_MODULE; @@ -220,7 +230,9 @@ static int stx104_probe(struct device *dev, unsigned int id) spin_lock_init(&stx104gpio->lock); - dev_set_drvdata(dev, stx104gpio); + stx104dev->indio_dev = indio_dev; + stx104dev->chip = &stx104gpio->chip; + dev_set_drvdata(dev, stx104dev); err = gpiochip_add_data(&stx104gpio->chip, stx104gpio); if (err) { @@ -228,14 +240,22 @@ static int stx104_probe(struct device *dev, unsigned int id) return err; } + err = iio_device_register(indio_dev); + if (err) { + dev_err(dev, "IIO device registering failed (%d)\n", err); + gpiochip_remove(&stx104gpio->chip); + return err; + } + return 0; } static int stx104_remove(struct device *dev, unsigned int id) { - struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev); + struct stx104_dev *const stx104dev = dev_get_drvdata(dev); - gpiochip_remove(&stx104gpio->chip); + iio_device_unregister(stx104dev->indio_dev); + gpiochip_remove(stx104dev->chip); return 0; } -- cgit v1.3-18-gd494 From 193e2d4fd91c5e5d563395f9577621dac4f4df31 Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 18 Jul 2016 17:56:43 -0700 Subject: iio: add Kconfig selects needed for triggered buffer compiles Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile. Remove IIO_TRIGGER if present since IIO_BUFFER selects it. Signed-off-by: Alison Schofield Cc: Daniel Baluta Signed-off-by: Jonathan Cameron --- drivers/iio/accel/Kconfig | 5 ++++- drivers/iio/humidity/Kconfig | 2 ++ drivers/iio/light/Kconfig | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 89d78208de3f..78f148ea9d9f 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -20,6 +20,8 @@ config BMA180 config BMA220 tristate "Bosch BMA220 3-Axis Accelerometer Driver" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to add support for the Bosch BMA220 triaxial acceleration sensor. @@ -234,7 +236,8 @@ config STK8312 config STK8BA50 tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver" depends on I2C - depends on IIO_TRIGGER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to get support for the Sensortek STK8BA50 3-axis accelerometer. diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 738a86d9e4a9..d04124345992 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -6,6 +6,8 @@ menu "Humidity sensors" config AM2315 tristate "Aosong AM2315 relative humidity and temperature sensor" depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the Aosong AM2315 relative humidity and ambient temperature sensor. diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 7c566f516572..12ceb11bc7c5 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -238,6 +238,8 @@ config MAX44000 tristate "MAX44000 Ambient and Infrared Proximity Sensor" depends on I2C select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here if you want to build support for Maxim Integrated's MAX44000 ambient and infrared proximity sensor device. -- cgit v1.3-18-gd494 From 31f453eac56bdc41f434126bc2d5933b9fb720ec Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 Jul 2016 22:32:58 +0200 Subject: iio: pressure: bmp280: fix runtime suspend/resume crash In commit 3d838118c6aa ("iio: pressure: bmp280: add power management") For some reason the code in the runtime suspend/resume hooks got wrong (I suspect in the ambition to cut down boilerplate) and it seems it was tested without CONFIG_PM and crashes like so for me: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = c0204000 [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 89 Comm: kworker/1:2 Not tainted 4.7.0-03348-g90dc3680458a-dirty #99 Hardware name: Generic DT based system Workqueue: pm pm_runtime_work task: df3c6300 ti: dec8a000 task.ti: dec8a000 PC is at regulator_disable+0x0/0x6c LR is at bmp280_runtime_suspend+0x3c/0xa4 Dereferencing the BMP280 state container properly fixes the problem, sorry for screwing up. Fixes: 3d838118c6aa ("iio: pressure: bmp280: add power management") Signed-off-by: Linus Walleij Tested-by: Jarkko Nikula Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/bmp280-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 94e27b2600f3..e5a533cbd53f 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -1079,7 +1079,8 @@ EXPORT_SYMBOL(bmp280_common_remove); #ifdef CONFIG_PM static int bmp280_runtime_suspend(struct device *dev) { - struct bmp280_data *data = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); int ret; ret = regulator_disable(data->vdda); @@ -1090,7 +1091,8 @@ static int bmp280_runtime_suspend(struct device *dev) static int bmp280_runtime_resume(struct device *dev) { - struct bmp280_data *data = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct bmp280_data *data = iio_priv(indio_dev); int ret; ret = regulator_enable(data->vddd); -- cgit v1.3-18-gd494 From 7b142d8fd0bd4c9bf06ccb72ac4daedb503f0124 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 16 Jun 2016 00:45:33 +0200 Subject: android: binder: fix dangling pointer comparison If /dev/binder is opened and the opener process then e.g. calls execve, proc->vma_vm_mm will still point to the location of the now-freed mm_struct. If the process then calls ioctl(binder_fd, ...), the dangling proc->vma_vm_mm pointer will be compared to current->mm. Let the binder take a reference to the mm_struct to avoid this. v2: use the right refcounter Fixes: a906d6931f3c ("android: binder: Sanity check at binder ioctl") Signed-off-by: Jann Horn Reviewed-by: Chen Feng Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 16288e777ec3..09fdb425e2f5 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2962,6 +2962,7 @@ static int binder_open(struct inode *nodp, struct file *filp) return -ENOMEM; get_task_struct(current); proc->tsk = current; + atomic_inc(¤t->mm->mm_count); proc->vma_vm_mm = current->mm; INIT_LIST_HEAD(&proc->todo); init_waitqueue_head(&proc->wait); @@ -3167,6 +3168,7 @@ static void binder_deferred_release(struct binder_proc *proc) vfree(proc->buffer); } + mmdrop(proc->vma_vm_mm); put_task_struct(proc->tsk); binder_debug(BINDER_DEBUG_OPEN_CLOSE, -- cgit v1.3-18-gd494 From f6b6a28e2dbc401416ff12f775d75281c9b41918 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Fri, 29 Jul 2016 16:15:18 -0300 Subject: nvme: Prevent controller state invalid transition Acquiring the nvme_ctrl lock before reading ctrl->state in nvme_change_ctrl_state() should prevent a theoretical invalid state transition, in the event of two threads racing inside that function. I haven't been able to observe this happening with the current code, and the current state machine seems to be simple enough to not be affected by these invalid transitions, but future modifications could make it more likely to happen. Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Sagi Grimberg Reviewed-by: Steve Wise Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 7ff2e820bbf4..7f75d661237f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -81,10 +81,12 @@ EXPORT_SYMBOL_GPL(nvme_cancel_request); bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, enum nvme_ctrl_state new_state) { - enum nvme_ctrl_state old_state = ctrl->state; + enum nvme_ctrl_state old_state; bool changed = false; spin_lock_irq(&ctrl->lock); + + old_state = ctrl->state; switch (new_state) { case NVME_CTRL_LIVE: switch (old_state) { @@ -140,11 +142,12 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, default: break; } - spin_unlock_irq(&ctrl->lock); if (changed) ctrl->state = new_state; + spin_unlock_irq(&ctrl->lock); + return changed; } EXPORT_SYMBOL_GPL(nvme_change_ctrl_state); -- cgit v1.3-18-gd494 From 0d9dcf852334b796bacc7020364afba3122db81e Mon Sep 17 00:00:00 2001 From: Alison Schofield Date: Mon, 8 Aug 2016 11:14:36 -0700 Subject: iio: humidity: hdc100x: fix sensor data reads of temp and humidity Replace the i2c_smbus_read_byte commmands used to retrieve the sensor data with an i2c_master_recv command. The smbus read byte method fails because the device does not expect a stop condition after sending the first byte. When we issue the second read, we are getting the first byte again. Net effect is that of the 14 bits used for the measurement, the 8 most significant bits are correct, the lower 6 are not. None of the smbus read protocols follow the pattern this device requires (S Addr Rd [A] Data [A] Data NA P), hence the switch to an i2c receive transaction. Applicable from original introduction of this driver, but will require backporting due to churn in the code. Signed-off-by: Alison Schofield Cc: Daniel Baluta Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/humidity/hdc100x.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c index a03832a5fc95..e0c9c70c2a4a 100644 --- a/drivers/iio/humidity/hdc100x.c +++ b/drivers/iio/humidity/hdc100x.c @@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data, struct i2c_client *client = data->client; int delay = data->adc_int_us[chan->address]; int ret; - int val; + __be16 val; /* start measurement */ ret = i2c_smbus_write_byte(client, chan->address); @@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data, /* wait for integration time to pass */ usleep_range(delay, delay + 1000); - /* - * i2c_smbus_read_word_data cannot() be used here due to the command - * value not being understood and causes NAKs preventing any reading - * from being accessed. - */ - ret = i2c_smbus_read_byte(client); + /* read measurement */ + ret = i2c_master_recv(data->client, (char *)&val, sizeof(val)); if (ret < 0) { - dev_err(&client->dev, "cannot read high byte measurement"); + dev_err(&client->dev, "cannot read sensor data\n"); return ret; } - val = ret << 8; - - ret = i2c_smbus_read_byte(client); - if (ret < 0) { - dev_err(&client->dev, "cannot read low byte measurement"); - return ret; - } - val |= ret; - - return val; + return be16_to_cpu(val); } static int hdc100x_get_heater_status(struct hdc100x_data *data) @@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client, struct iio_dev *indio_dev; struct hdc100x_data *data; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C)) return -EOPNOTSUPP; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); -- cgit v1.3-18-gd494 From c2ab447454d498e709d9011c0f2d2945ee321f9b Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Mon, 8 Aug 2016 14:42:16 +0200 Subject: iio: adc: at91: unbreak channel adc channel 3 The driver always assumes that an input device has been created when reading channel 3. This causes a kernel panic when dereferencing st->ts_input. The change was introduced in commit 84882b060301 ("iio: adc: at91_adc: Add support for touchscreens without TSMR"). Earlier versions only entered that part of the if-else statement if only the following flags are set: AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY Signed-off-by: Anders Darander Acked-by: Alexandre Belloni Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91_adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 52430ba171f3..0438c68015e8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private) st->ts_bufferedmeasure = false; input_report_key(st->ts_input, BTN_TOUCH, 0); input_sync(st->ts_input); - } else if (status & AT91_ADC_EOC(3)) { - /* Conversion finished */ + } else if (status & AT91_ADC_EOC(3) && st->ts_input) { + /* Conversion finished and we've a touchscreen */ if (st->ts_bufferedmeasure) { /* * Last measurement is always discarded, since it can -- cgit v1.3-18-gd494 From 99f1c013194e64d4b67d5d318148303b0e1585e1 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Thu, 14 Jul 2016 23:40:21 -0400 Subject: staging/lustre/llite: Close atomic_open race with several openers Right now, if it's an open of a negative dentry, a race is possible with several openers who all try to instantiate/rehash the same dentry and would hit a BUG_ON in d_add. But in fact if we got a negative dentry in atomic_open, that means we just revalidated it so no point in talking to MDS at all, just return ENOENT and make the race go away completely. Signed-off-by: Oleg Drokin Cc: stable # 4.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/lustre/lustre/llite/namei.c | 43 ++++++++++++++++------------- 1 file changed, 24 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lustre/lustre/llite/namei.c b/drivers/staging/lustre/lustre/llite/namei.c index 3664bfd0178b..2c4dc69731e8 100644 --- a/drivers/staging/lustre/lustre/llite/namei.c +++ b/drivers/staging/lustre/lustre/llite/namei.c @@ -388,6 +388,7 @@ static int ll_lookup_it_finish(struct ptlrpc_request *request, struct inode *inode = NULL; __u64 bits = 0; int rc = 0; + struct dentry *alias; /* NB 1 request reference will be taken away by ll_intent_lock() * when I return @@ -412,26 +413,12 @@ static int ll_lookup_it_finish(struct ptlrpc_request *request, */ } - /* Only hash *de if it is unhashed (new dentry). - * Atoimc_open may passing hashed dentries for open. - */ - if (d_unhashed(*de)) { - struct dentry *alias; - - alias = ll_splice_alias(inode, *de); - if (IS_ERR(alias)) { - rc = PTR_ERR(alias); - goto out; - } - *de = alias; - } else if (!it_disposition(it, DISP_LOOKUP_NEG) && - !it_disposition(it, DISP_OPEN_CREATE)) { - /* With DISP_OPEN_CREATE dentry will be - * instantiated in ll_create_it. - */ - LASSERT(!d_inode(*de)); - d_instantiate(*de, inode); + alias = ll_splice_alias(inode, *de); + if (IS_ERR(alias)) { + rc = PTR_ERR(alias); + goto out; } + *de = alias; if (!it_disposition(it, DISP_LOOKUP_NEG)) { /* we have lookup look - unhide dentry */ @@ -587,6 +574,24 @@ static int ll_atomic_open(struct inode *dir, struct dentry *dentry, dentry, PFID(ll_inode2fid(dir)), dir, file, open_flags, mode, *opened); + /* Only negative dentries enter here */ + LASSERT(!d_inode(dentry)); + + if (!d_in_lookup(dentry)) { + /* A valid negative dentry that just passed revalidation, + * there's little point to try and open it server-side, + * even though there's a minuscle chance it might succeed. + * Either way it's a valid race to just return -ENOENT here. + */ + if (!(open_flags & O_CREAT)) + return -ENOENT; + + /* Otherwise we just unhash it to be rehashed afresh via + * lookup if necessary + */ + d_drop(dentry); + } + it = kzalloc(sizeof(*it), GFP_NOFS); if (!it) return -ENOMEM; -- cgit v1.3-18-gd494 From a87eeb900dbb9f8202f96604d56e47e67c936b9d Mon Sep 17 00:00:00 2001 From: Tyrel Datwyler Date: Fri, 12 Aug 2016 17:20:07 -0500 Subject: scsi: fix upper bounds check of sense key in scsi_sense_key_string() Commit 655ee63cf371 ("scsi constants: command, sense key + additional sense string") added a "Completed" sense string with key 0xF to snstext[], but failed to updated the upper bounds check of the sense key in scsi_sense_key_string(). Fixes: 655ee63cf371 ("[SCSI] scsi constants: command, sense key + additional sense strings") Cc: # v3.12+ Signed-off-by: Tyrel Datwyler Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/constants.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 83458f7a2824..6dc96c8dfe75 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -361,8 +361,9 @@ static const char * const snstext[] = { /* Get sense key string or NULL if not available */ const char * -scsi_sense_key_string(unsigned char key) { - if (key <= 0xE) +scsi_sense_key_string(unsigned char key) +{ + if (key < ARRAY_SIZE(snstext)) return snstext[key]; return NULL; } -- cgit v1.3-18-gd494 From c6b269ba51be70fd11852bcad2e163c734e8e92a Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 13 Aug 2016 00:56:03 +0200 Subject: scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACH "Universal Xport" LUN is used for in-band storage array management. Cc: Sean Stewart Cc: Christophe Varoqui Cc: James E.J. Bottomley Cc: Martin K. Petersen Cc: SCSI ML Cc: device-mapper development Signed-off-by: Xose Vazquez Perez Acked-by: Sean Stewart Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_devinfo.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index eaccd651ccda..246456925335 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -246,6 +246,10 @@ static struct { {"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"SUN", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"DELL", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"STK", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"NETAPP", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, + {"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH}, {"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36}, {"SONY", "CD-ROM CDU-8001", NULL, BLIST_BORKEN}, {"SONY", "TSL", NULL, BLIST_FORCELUN}, /* DDS3 & DDS4 autoloaders */ -- cgit v1.3-18-gd494 From 83cf8df2d4fa48a80b384fea4b09b12180a2442e Mon Sep 17 00:00:00 2001 From: Valentin Rothberg Date: Tue, 16 Aug 2016 08:27:53 +0200 Subject: drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup Commit 7ef9153d9af5 ("misc: delete bh1780 driver") has removed the Kconfig option SENSORS_BH1780. Remove the last reference on this option. Signed-off-by: Valentin Rothberg Signed-off-by: Greg Kroah-Hartman --- drivers/iio/light/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 7c566f516572..69904d55d76d 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -76,7 +76,6 @@ config BH1750 config BH1780 tristate "ROHM BH1780 ambient light sensor" depends on I2C - depends on !SENSORS_BH1780 help Say Y here to build support for the ROHM BH1780GLI ambient light sensor. -- cgit v1.3-18-gd494 From 39bbee4e549fbc358b2ef9137c4bf459abd164fb Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 16 Aug 2016 09:24:39 +0100 Subject: nvme-rdma: initialize ret to zero to avoid returning garbage ret is not initialized so it contains garbage. Ensure garbage is not returned by initializing rc to 0. Signed-off-by: Colin Ian King Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 8d2875b4c56d..9c69393f6d1f 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1319,7 +1319,7 @@ out_destroy_queue_ib: static int nvme_rdma_device_unplug(struct nvme_rdma_queue *queue) { struct nvme_rdma_ctrl *ctrl = queue->ctrl; - int ret; + int ret = 0; /* Own the controller deletion */ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING)) -- cgit v1.3-18-gd494 From 3256aaef5e9a851f6be47656868020726e102187 Mon Sep 17 00:00:00 2001 From: Vincent Stehlé Date: Tue, 16 Aug 2016 15:11:25 +0200 Subject: nvmet-rdma: Fix use after free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoid dereferencing the queue pointer in nvmet_rdma_release_queue_work() after it has been freed by nvmet_rdma_free_queue(). Fixes: d8f7750a08968b10 ("nvmet-rdma: Correctly handle RDMA device hot removal") Signed-off-by: Vincent Stehlé Cc: Sagi Grimberg Cc: Christoph Hellwig Signed-off-by: Sagi Grimberg --- drivers/nvme/target/rdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index b4d648536c3e..5de8d0a0db58 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -978,10 +978,11 @@ static void nvmet_rdma_release_queue_work(struct work_struct *w) container_of(w, struct nvmet_rdma_queue, release_work); struct rdma_cm_id *cm_id = queue->cm_id; struct nvmet_rdma_device *dev = queue->dev; + enum nvmet_rdma_queue_state state = queue->state; nvmet_rdma_free_queue(queue); - if (queue->state != NVMET_RDMA_IN_DEVICE_REMOVAL) + if (state != NVMET_RDMA_IN_DEVICE_REMOVAL) rdma_destroy_id(cm_id); kref_put(&dev->ref, nvmet_rdma_free_dev); -- cgit v1.3-18-gd494 From 7afafc8a44bf0ab841b17d450b02aedb3a138985 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 16 Aug 2016 10:59:35 +0300 Subject: block: Fix secure erase Commit 288dab8a35a0 ("block: add a separate operation type for secure erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering all the places REQ_OP_DISCARD was being used to mean either. Fix those. Signed-off-by: Adrian Hunter Fixes: 288dab8a35a0 ("block: add a separate operation type for secure erase") Signed-off-by: Jens Axboe --- block/bio.c | 21 +++++++++++---------- block/blk-merge.c | 33 +++++++++++++++++++-------------- block/elevator.c | 2 +- drivers/mmc/card/block.c | 1 + drivers/mmc/card/queue.c | 3 ++- drivers/mmc/card/queue.h | 4 +++- include/linux/bio.h | 10 ++++++++-- include/linux/blkdev.h | 6 ++++-- kernel/trace/blktrace.c | 2 +- 9 files changed, 50 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/block/bio.c b/block/bio.c index f39477538fef..aa7354088008 100644 --- a/block/bio.c +++ b/block/bio.c @@ -667,18 +667,19 @@ struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask, bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector; bio->bi_iter.bi_size = bio_src->bi_iter.bi_size; - if (bio_op(bio) == REQ_OP_DISCARD) - goto integrity_clone; - - if (bio_op(bio) == REQ_OP_WRITE_SAME) { + switch (bio_op(bio)) { + case REQ_OP_DISCARD: + case REQ_OP_SECURE_ERASE: + break; + case REQ_OP_WRITE_SAME: bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0]; - goto integrity_clone; + break; + default: + bio_for_each_segment(bv, bio_src, iter) + bio->bi_io_vec[bio->bi_vcnt++] = bv; + break; } - bio_for_each_segment(bv, bio_src, iter) - bio->bi_io_vec[bio->bi_vcnt++] = bv; - -integrity_clone: if (bio_integrity(bio_src)) { int ret; @@ -1788,7 +1789,7 @@ struct bio *bio_split(struct bio *bio, int sectors, * Discards need a mutable bio_vec to accommodate the payload * required by the DSM TRIM and UNMAP commands. */ - if (bio_op(bio) == REQ_OP_DISCARD) + if (bio_op(bio) == REQ_OP_DISCARD || bio_op(bio) == REQ_OP_SECURE_ERASE) split = bio_clone_bioset(bio, gfp, bs); else split = bio_clone_fast(bio, gfp, bs); diff --git a/block/blk-merge.c b/block/blk-merge.c index 3eec75a9e91d..72627e3cf91e 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -172,12 +172,18 @@ void blk_queue_split(struct request_queue *q, struct bio **bio, struct bio *split, *res; unsigned nsegs; - if (bio_op(*bio) == REQ_OP_DISCARD) + switch (bio_op(*bio)) { + case REQ_OP_DISCARD: + case REQ_OP_SECURE_ERASE: split = blk_bio_discard_split(q, *bio, bs, &nsegs); - else if (bio_op(*bio) == REQ_OP_WRITE_SAME) + break; + case REQ_OP_WRITE_SAME: split = blk_bio_write_same_split(q, *bio, bs, &nsegs); - else + break; + default: split = blk_bio_segment_split(q, *bio, q->bio_split, &nsegs); + break; + } /* physical segments can be figured out during splitting */ res = split ? split : *bio; @@ -213,7 +219,7 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q, * This should probably be returning 0, but blk_add_request_payload() * (Christoph!!!!) */ - if (bio_op(bio) == REQ_OP_DISCARD) + if (bio_op(bio) == REQ_OP_DISCARD || bio_op(bio) == REQ_OP_SECURE_ERASE) return 1; if (bio_op(bio) == REQ_OP_WRITE_SAME) @@ -385,7 +391,9 @@ static int __blk_bios_map_sg(struct request_queue *q, struct bio *bio, nsegs = 0; cluster = blk_queue_cluster(q); - if (bio_op(bio) == REQ_OP_DISCARD) { + switch (bio_op(bio)) { + case REQ_OP_DISCARD: + case REQ_OP_SECURE_ERASE: /* * This is a hack - drivers should be neither modifying the * biovec, nor relying on bi_vcnt - but because of @@ -393,19 +401,16 @@ static int __blk_bios_map_sg(struct request_queue *q, struct bio *bio, * a payload we need to set up here (thank you Christoph) and * bi_vcnt is really the only way of telling if we need to. */ - - if (bio->bi_vcnt) - goto single_segment; - - return 0; - } - - if (bio_op(bio) == REQ_OP_WRITE_SAME) { -single_segment: + if (!bio->bi_vcnt) + return 0; + /* Fall through */ + case REQ_OP_WRITE_SAME: *sg = sglist; bvec = bio_iovec(bio); sg_set_page(*sg, bvec.bv_page, bvec.bv_len, bvec.bv_offset); return 1; + default: + break; } for_each_bio(bio) diff --git a/block/elevator.c b/block/elevator.c index 7096c22041e7..f7d973a56fd7 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -366,7 +366,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq) list_for_each_prev(entry, &q->queue_head) { struct request *pos = list_entry_rq(entry); - if ((req_op(rq) == REQ_OP_DISCARD) != (req_op(pos) == REQ_OP_DISCARD)) + if (req_op(rq) != req_op(pos)) break; if (rq_data_dir(rq) != rq_data_dir(pos)) break; diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 48a5dd740f3b..82503e6f04b3 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1726,6 +1726,7 @@ static u8 mmc_blk_prep_packed_list(struct mmc_queue *mq, struct request *req) break; if (req_op(next) == REQ_OP_DISCARD || + req_op(next) == REQ_OP_SECURE_ERASE || req_op(next) == REQ_OP_FLUSH) break; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index bf14642a576a..29578e98603d 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -33,7 +33,8 @@ static int mmc_prep_request(struct request_queue *q, struct request *req) /* * We only like normal block requests and discards. */ - if (req->cmd_type != REQ_TYPE_FS && req_op(req) != REQ_OP_DISCARD) { + if (req->cmd_type != REQ_TYPE_FS && req_op(req) != REQ_OP_DISCARD && + req_op(req) != REQ_OP_SECURE_ERASE) { blk_dump_rq_flags(req, "MMC bad request"); return BLKPREP_KILL; } diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index d62531124d54..fee5e1271465 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -4,7 +4,9 @@ static inline bool mmc_req_is_special(struct request *req) { return req && - (req_op(req) == REQ_OP_FLUSH || req_op(req) == REQ_OP_DISCARD); + (req_op(req) == REQ_OP_FLUSH || + req_op(req) == REQ_OP_DISCARD || + req_op(req) == REQ_OP_SECURE_ERASE); } struct request; diff --git a/include/linux/bio.h b/include/linux/bio.h index 59ffaa68b11b..23ddf4b46a9b 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -71,7 +71,8 @@ static inline bool bio_has_data(struct bio *bio) { if (bio && bio->bi_iter.bi_size && - bio_op(bio) != REQ_OP_DISCARD) + bio_op(bio) != REQ_OP_DISCARD && + bio_op(bio) != REQ_OP_SECURE_ERASE) return true; return false; @@ -79,7 +80,9 @@ static inline bool bio_has_data(struct bio *bio) static inline bool bio_no_advance_iter(struct bio *bio) { - return bio_op(bio) == REQ_OP_DISCARD || bio_op(bio) == REQ_OP_WRITE_SAME; + return bio_op(bio) == REQ_OP_DISCARD || + bio_op(bio) == REQ_OP_SECURE_ERASE || + bio_op(bio) == REQ_OP_WRITE_SAME; } static inline bool bio_is_rw(struct bio *bio) @@ -199,6 +202,9 @@ static inline unsigned bio_segments(struct bio *bio) if (bio_op(bio) == REQ_OP_DISCARD) return 1; + if (bio_op(bio) == REQ_OP_SECURE_ERASE) + return 1; + if (bio_op(bio) == REQ_OP_WRITE_SAME) return 1; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2c210b6a7bcf..e79055c8b577 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -882,7 +882,7 @@ static inline unsigned int blk_rq_cur_sectors(const struct request *rq) static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q, int op) { - if (unlikely(op == REQ_OP_DISCARD)) + if (unlikely(op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE)) return min(q->limits.max_discard_sectors, UINT_MAX >> 9); if (unlikely(op == REQ_OP_WRITE_SAME)) @@ -913,7 +913,9 @@ static inline unsigned int blk_rq_get_max_sectors(struct request *rq, if (unlikely(rq->cmd_type != REQ_TYPE_FS)) return q->limits.max_hw_sectors; - if (!q->limits.chunk_sectors || (req_op(rq) == REQ_OP_DISCARD)) + if (!q->limits.chunk_sectors || + req_op(rq) == REQ_OP_DISCARD || + req_op(rq) == REQ_OP_SECURE_ERASE) return blk_queue_get_max_sectors(q, req_op(rq)); return min(blk_max_size_offset(q, offset), diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 7598e6ca817a..dbafc5df03f3 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -223,7 +223,7 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, what |= MASK_TC_BIT(op_flags, META); what |= MASK_TC_BIT(op_flags, PREFLUSH); what |= MASK_TC_BIT(op_flags, FUA); - if (op == REQ_OP_DISCARD) + if (op == REQ_OP_DISCARD || op == REQ_OP_SECURE_ERASE) what |= BLK_TC_ACT(BLK_TC_DISCARD); if (op == REQ_OP_FLUSH) what |= BLK_TC_ACT(BLK_TC_FLUSH); -- cgit v1.3-18-gd494 From 4fe0d154880bb6eb833cbe84fa6f385f400f0b9c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 11 Aug 2016 07:11:04 -0700 Subject: PCI: Use positive flags in pci_alloc_irq_vectors() Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of certain interrupt types, pass positive flags like PCI_IRQ_LEGACY, PCI_IRQ_MSI, etc., to specify the acceptable interrupt types. This is based on a number of pending driver conversions that just happend to be a whole more obvious to read this way, and given that we have no users in the tree yet it can still easily be done. I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting all interrupt types very simple. [bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of PCI_IRQ_NOLEGACY] Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Alexander Gordeev --- Documentation/PCI/MSI-HOWTO.txt | 24 ++++++++++-------------- drivers/pci/msi.c | 15 +++++++-------- include/linux/pci.h | 10 ++++++---- 3 files changed, 23 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index c55df2911136..cd9c9f6a7cd9 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a min_vecs argument set to this limit, and the PCI core will return -ENOSPC if it can't meet the minimum number of vectors. -The flags argument should normally be set to 0, but can be used to pass the -PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support -MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in -case the device does not support legacy interrupt lines. - -By default this function will spread the interrupts around the available -CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY -flag. +The flags argument is used to specify which type of interrupt can be used +by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX). +A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for +any possible kind of interrupt. If the PCI_IRQ_AFFINITY flag is set, +pci_alloc_irq_vectors() will spread the interrupts around the available CPUs. To get the Linux IRQ numbers passed to request_irq() and free_irq() and the vectors, use the following function: @@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be capped to the supported limit, so there is no need to query the number of vectors supported beforehand: - nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0); + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES) if (nvec < 0) goto out_err; @@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that number to pci_alloc_irq_vectors() function as both 'min_vecs' and 'max_vecs' parameters: - ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0); + ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES); if (ret < 0) goto out_err; @@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling the single MSI mode for a device. It could be done by passing two 1s as 'min_vecs' and 'max_vecs': - ret = pci_alloc_irq_vectors(pdev, 1, 1, 0); + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); if (ret < 0) goto out_err; Some devices might not support using legacy line interrupts, in which case -the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform -can't provide MSI or MSI-X interrupts: +the driver can specify that only MSI or MSI-X is acceptable: - nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY); + nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX); if (nvec < 0) goto out_err; diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a02981efdad5..9233e7f62f47 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -1069,7 +1069,7 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, nvec = maxvec; for (;;) { - if (!(flags & PCI_IRQ_NOAFFINITY)) { + if (flags & PCI_IRQ_AFFINITY) { dev->irq_affinity = irq_create_affinity_mask(&nvec); if (nvec < minvec) return -ENOSPC; @@ -1105,7 +1105,7 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, **/ int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec) { - return __pci_enable_msi_range(dev, minvec, maxvec, PCI_IRQ_NOAFFINITY); + return __pci_enable_msi_range(dev, minvec, maxvec, 0); } EXPORT_SYMBOL(pci_enable_msi_range); @@ -1120,7 +1120,7 @@ static int __pci_enable_msix_range(struct pci_dev *dev, return -ERANGE; for (;;) { - if (!(flags & PCI_IRQ_NOAFFINITY)) { + if (flags & PCI_IRQ_AFFINITY) { dev->irq_affinity = irq_create_affinity_mask(&nvec); if (nvec < minvec) return -ENOSPC; @@ -1160,8 +1160,7 @@ static int __pci_enable_msix_range(struct pci_dev *dev, int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec) { - return __pci_enable_msix_range(dev, entries, minvec, maxvec, - PCI_IRQ_NOAFFINITY); + return __pci_enable_msix_range(dev, entries, minvec, maxvec, 0); } EXPORT_SYMBOL(pci_enable_msix_range); @@ -1187,21 +1186,21 @@ int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, { int vecs = -ENOSPC; - if (!(flags & PCI_IRQ_NOMSIX)) { + if (flags & PCI_IRQ_MSIX) { vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs, flags); if (vecs > 0) return vecs; } - if (!(flags & PCI_IRQ_NOMSI)) { + if (flags & PCI_IRQ_MSI) { vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, flags); if (vecs > 0) return vecs; } /* use legacy irq if allowed */ - if (!(flags & PCI_IRQ_NOLEGACY) && min_vecs == 1) + if ((flags & PCI_IRQ_LEGACY) && min_vecs == 1) return 1; return vecs; } diff --git a/include/linux/pci.h b/include/linux/pci.h index 2599a980340f..fbc1fa625c3e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1251,10 +1251,12 @@ resource_size_t pcibios_iov_resource_alignment(struct pci_dev *dev, int resno); int pci_set_vga_state(struct pci_dev *pdev, bool decode, unsigned int command_bits, u32 flags); -#define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */ -#define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */ -#define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */ -#define PCI_IRQ_NOAFFINITY (1 << 3) /* don't auto-assign affinity */ +#define PCI_IRQ_LEGACY (1 << 0) /* allow legacy interrupts */ +#define PCI_IRQ_MSI (1 << 1) /* allow MSI interrupts */ +#define PCI_IRQ_MSIX (1 << 2) /* allow MSI-X interrupts */ +#define PCI_IRQ_AFFINITY (1 << 3) /* auto-assign affinity */ +#define PCI_IRQ_ALL_TYPES \ + (PCI_IRQ_LEGACY | PCI_IRQ_MSI | PCI_IRQ_MSIX) /* kmem_cache style wrapper around pci_alloc_consistent() */ -- cgit v1.3-18-gd494 From b347af816ad2086c1dacf9f74973b82f83e877be Mon Sep 17 00:00:00 2001 From: Song Liu Date: Thu, 11 Aug 2016 17:14:45 -0700 Subject: md: do not count journal as spare in GET_ARRAY_INFO GET_ARRAY_INFO counts journal as spare (spare_disks), which is not accurate. This patch fixes this. Reported-by: Yi Zhang Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 2c3ab6f5e6be..d750b52376b9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5851,6 +5851,9 @@ static int get_array_info(struct mddev *mddev, void __user *arg) working++; if (test_bit(In_sync, &rdev->flags)) insync++; + else if (test_bit(Journal, &rdev->flags)) + /* TODO: add journal count to md_u.h */ + ; else spare++; } -- cgit v1.3-18-gd494 From 4e486cba285ff06a1f28f0fc2991dde1482d1dcf Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Tue, 2 Aug 2016 16:45:37 +0100 Subject: bus: arm-ccn: Fix PMU handling of MN The "Miscellaneous Node" fell through cracks of node initialisation, as its ID is shared with HN-I. This patch treats MN as a special case (which it is), adding separate validation check for it and pre-defining the node ID in relevant events descriptions. That way one can simply run: # perf stat -a -e ccn/mn_ecbarrier/ Additionally, direction in the MN pseudo-events XP watchpoint definitions is corrected to be "TX" (1) as they are defined from the crosspoint point of view (thus barriers are transmitted from XP to MN). Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 97a9185af433..a11b9bb1f27c 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -187,6 +187,7 @@ struct arm_ccn { struct arm_ccn_component *xp; struct arm_ccn_dt dt; + int mn_id; }; static DEFINE_MUTEX(arm_ccn_mutex); @@ -328,6 +329,7 @@ struct arm_ccn_pmu_event { static ssize_t arm_ccn_pmu_event_show(struct device *dev, struct device_attribute *attr, char *buf) { + struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev)); struct arm_ccn_pmu_event *event = container_of(attr, struct arm_ccn_pmu_event, attr); ssize_t res; @@ -354,6 +356,9 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev, res += snprintf(buf + res, PAGE_SIZE - res, ",cmp_l=?,cmp_h=?,mask=?"); break; + case CCN_TYPE_MN: + res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id); + break; default: res += snprintf(buf + res, PAGE_SIZE - res, ",node=?"); break; @@ -383,9 +388,9 @@ static umode_t arm_ccn_pmu_events_is_visible(struct kobject *kobj, } static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = { - CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE), - CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE), - CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE), + CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE), + CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE), + CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE), CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY), CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY), CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY), @@ -759,6 +764,12 @@ static int arm_ccn_pmu_event_init(struct perf_event *event) /* Validate node/xp vs topology */ switch (type) { + case CCN_TYPE_MN: + if (node_xp != ccn->mn_id) { + dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp); + return -EINVAL; + } + break; case CCN_TYPE_XP: if (node_xp >= ccn->num_xps) { dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp); @@ -1361,6 +1372,8 @@ static int arm_ccn_init_nodes(struct arm_ccn *ccn, int region, switch (type) { case CCN_TYPE_MN: + ccn->mn_id = id; + return 0; case CCN_TYPE_DT: return 0; case CCN_TYPE_XP: -- cgit v1.3-18-gd494 From b7c1beb278e8e3dc664ed3df3fc786db126120a9 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Fri, 5 Aug 2016 15:07:10 +0100 Subject: bus: arm-ccn: Do not attempt to configure XPs for cycle counter Fuzzing the CCN perf driver revealed a small but definitely dangerous mistake in the event setup code. When a cycle counter is requested, the driver should not reconfigure the events bus at all, otherwise it will corrupt (in most but the simplest cases) its configuration and may end up accessing XP array out of its bounds and corrupting control registers. Reported-by: Mark Rutland Reviewed-by: Mark Rutland Tested-by: Mark Rutland Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index a11b9bb1f27c..9bbb0ab275e4 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -897,6 +897,10 @@ static void arm_ccn_pmu_xp_dt_config(struct perf_event *event, int enable) struct arm_ccn_component *xp; u32 val, dt_cfg; + /* Nothing to do for cycle counter */ + if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER) + return; + if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP) xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)]; else -- cgit v1.3-18-gd494 From b928466b2169e061822daad48ecf55b005445547 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 10 Aug 2016 17:06:26 +0100 Subject: bus: arm-ccn: Fix XP watchpoint settings bitmask The code setting XP watchpoint comparator and mask registers should, in order to be fully compliant with specification, zero one or more most significant bits of each field. In both L cases it means zeroing bit 63. The bitmask doing this was wrong, though, zeroing bit 60 instead. Fortunately, due to a lucky coincidence, this turned out to be fairly innocent with the existing hardware. Fixed now. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 9bbb0ab275e4..647a27b80eff 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -1003,7 +1003,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event) /* Comparison values */ writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp)); - writel((cmp_l >> 32) & 0xefffffff, + writel((cmp_l >> 32) & 0x7fffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4); writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp)); writel((cmp_h >> 32) & 0x0fffffff, @@ -1011,7 +1011,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event) /* Mask */ writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp)); - writel((mask_l >> 32) & 0xefffffff, + writel((mask_l >> 32) & 0x7fffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4); writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp)); writel((mask_h >> 32) & 0x0fffffff, -- cgit v1.3-18-gd494 From 90d11e267a32a25d2cb69127174a96b9e518395e Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Thu, 11 Aug 2016 11:56:28 +0100 Subject: bus: arm-ccn: Correct required arguments for XP PMU events XP can provide events from two sources: watchpoints, observing traffic on device ports and PMU looking at internal buses. Unfortunately the sysfs definition of the PMU events was requiring port number (instead of bus number) and direction (the buses are unidirectional), as these fields were shared with the watchpoint event. Although it does not introduce a major problem (port can be used as bus alias and direction is simply ignored for XP PMU events), it's better to fix it now, before external tools start depending on this behaviour. Signed-off-by: Pawel Moll --- Documentation/arm/CCN.txt | 16 ++++++++++------ drivers/bus/arm-ccn.c | 13 ++++++++++--- 2 files changed, 20 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt index ffca443a19b4..15cdb7bc57c3 100644 --- a/Documentation/arm/CCN.txt +++ b/Documentation/arm/CCN.txt @@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events" directory provides configuration templates for all documented events, that can be used with perf tool. For example "xp_valid_flit" is an equivalent of "type=0x8,event=0x4". Other parameters must be -explicitly specified. For events originating from device, "node" -defines its index. All crosspoint events require "xp" (index), -"port" (device port number) and "vc" (virtual channel ID) and -"dir" (direction). Watchpoints (special "event" value 0xfe) also -require comparator values ("cmp_l" and "cmp_h") and "mask", being -index of the comparator mask. +explicitly specified. +For events originating from device, "node" defines its index. + +Crosspoint PMU events require "xp" (index), "bus" (bus number) +and "vc" (virtual channel ID). + +Crosspoint watchpoint-based events (special "event" value 0xfe) +require "xp" and "vc" as as above plus "port" (device port index), +"dir" (transmit/receive direction), comparator values ("cmp_l" +and "cmp_h") and "mask", being index of the comparator mask. Masks are defined separately from the event description (due to limited number of the config values) in the "cmp_mask" directory, with first 8 configurable by user and additional diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 647a27b80eff..ddb65c117012 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -213,6 +213,7 @@ static int arm_ccn_node_to_xp_port(int node) #define CCN_CONFIG_TYPE(_config) (((_config) >> 8) & 0xff) #define CCN_CONFIG_EVENT(_config) (((_config) >> 16) & 0xff) #define CCN_CONFIG_PORT(_config) (((_config) >> 24) & 0x3) +#define CCN_CONFIG_BUS(_config) (((_config) >> 24) & 0x3) #define CCN_CONFIG_VC(_config) (((_config) >> 26) & 0x7) #define CCN_CONFIG_DIR(_config) (((_config) >> 29) & 0x1) #define CCN_CONFIG_MASK(_config) (((_config) >> 30) & 0xf) @@ -242,6 +243,7 @@ static CCN_FORMAT_ATTR(xp, "config:0-7"); static CCN_FORMAT_ATTR(type, "config:8-15"); static CCN_FORMAT_ATTR(event, "config:16-23"); static CCN_FORMAT_ATTR(port, "config:24-25"); +static CCN_FORMAT_ATTR(bus, "config:24-25"); static CCN_FORMAT_ATTR(vc, "config:26-28"); static CCN_FORMAT_ATTR(dir, "config:29-29"); static CCN_FORMAT_ATTR(mask, "config:30-33"); @@ -254,6 +256,7 @@ static struct attribute *arm_ccn_pmu_format_attrs[] = { &arm_ccn_pmu_format_attr_type.attr.attr, &arm_ccn_pmu_format_attr_event.attr.attr, &arm_ccn_pmu_format_attr_port.attr.attr, + &arm_ccn_pmu_format_attr_bus.attr.attr, &arm_ccn_pmu_format_attr_vc.attr.attr, &arm_ccn_pmu_format_attr_dir.attr.attr, &arm_ccn_pmu_format_attr_mask.attr.attr, @@ -351,10 +354,14 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev, break; case CCN_TYPE_XP: res += snprintf(buf + res, PAGE_SIZE - res, - ",xp=?,port=?,vc=?,dir=?"); + ",xp=?,vc=?"); if (event->event == CCN_EVENT_WATCHPOINT) res += snprintf(buf + res, PAGE_SIZE - res, - ",cmp_l=?,cmp_h=?,mask=?"); + ",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?"); + else + res += snprintf(buf + res, PAGE_SIZE - res, + ",bus=?"); + break; case CCN_TYPE_MN: res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id); @@ -1029,7 +1036,7 @@ static void arm_ccn_pmu_xp_event_config(struct perf_event *event) hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base); id = (CCN_CONFIG_VC(event->attr.config) << 4) | - (CCN_CONFIG_PORT(event->attr.config) << 3) | + (CCN_CONFIG_BUS(event->attr.config) << 3) | (CCN_CONFIG_EVENT(event->attr.config) << 0); val = readl(source->base + CCN_XP_PMU_EVENT_SEL); -- cgit v1.3-18-gd494 From 3249bce459ff0bb7c1621b00a8e2d6afe24c53bb Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Thu, 11 Aug 2016 12:00:36 +0100 Subject: bus: arm-ccn: Add missing event attribute exclusions for host/guest CCN PMUs have no knowledge into VM-related origins of the memory traffic, therefore can't handle requests for host-only or guest-only events. Added appropriate exclusions (they should have been there from the beginning). This required changing the error code returned, as the userspace tool only re-negotiates the options (exclude_guest is true by default) only for EINVAL. Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index ddb65c117012..02f81e308dff 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -745,9 +745,10 @@ static int arm_ccn_pmu_event_init(struct perf_event *event) if (has_branch_stack(event) || event->attr.exclude_user || event->attr.exclude_kernel || event->attr.exclude_hv || - event->attr.exclude_idle) { + event->attr.exclude_idle || event->attr.exclude_host || + event->attr.exclude_guest) { dev_warn(ccn->dev, "Can't exclude execution levels!\n"); - return -EOPNOTSUPP; + return -EINVAL; } if (event->cpu < 0) { -- cgit v1.3-18-gd494 From cea8aa3a93d1734816e1e3f7b118e1dddf3f4aaa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 17 Aug 2016 14:07:46 +0200 Subject: regulator: Change Krzysztof Kozlowski's email to kernel.org Change my email address to kernel.org instead of Samsung one for the purpose of any future contact. The copyrights remain untouched and are attributed to Samsung. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Mark Brown --- drivers/regulator/max14577-regulator.c | 4 ++-- drivers/regulator/max77693-regulator.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c index b2daa6641417..c9ff26199711 100644 --- a/drivers/regulator/max14577-regulator.c +++ b/drivers/regulator/max14577-regulator.c @@ -2,7 +2,7 @@ * max14577.c - Regulator driver for the Maxim 14577/77836 * * Copyright (C) 2013,2014 Samsung Electronics - * Krzysztof Kozlowski + * Krzysztof Kozlowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -331,7 +331,7 @@ static void __exit max14577_regulator_exit(void) } module_exit(max14577_regulator_exit); -MODULE_AUTHOR("Krzysztof Kozlowski "); +MODULE_AUTHOR("Krzysztof Kozlowski "); MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:max14577-regulator"); diff --git a/drivers/regulator/max77693-regulator.c b/drivers/regulator/max77693-regulator.c index de730fd3f8a5..cfbb9512e486 100644 --- a/drivers/regulator/max77693-regulator.c +++ b/drivers/regulator/max77693-regulator.c @@ -3,7 +3,7 @@ * * Copyright (C) 2013-2015 Samsung Electronics * Jonghwa Lee - * Krzysztof Kozlowski + * Krzysztof Kozlowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -314,5 +314,5 @@ module_exit(max77693_pmic_cleanup); MODULE_DESCRIPTION("MAXIM 77693/77843 regulator driver"); MODULE_AUTHOR("Jonghwa Lee "); -MODULE_AUTHOR("Krzysztof Kozlowski "); +MODULE_AUTHOR("Krzysztof Kozlowski "); MODULE_LICENSE("GPL"); -- cgit v1.3-18-gd494 From 207efcd2b55e0460dfee35663fbb3d05efad990a Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Fri, 12 Aug 2016 13:42:40 +0800 Subject: md: remove obsolete ret in md_start_sync The ret is not needed anymore since we have already move resync_start into md_do_sync in commit 41a9a0d. Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li --- drivers/md/md.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index d750b52376b9..19d8e23bda5c 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8278,16 +8278,13 @@ no_add: static void md_start_sync(struct work_struct *ws) { struct mddev *mddev = container_of(ws, struct mddev, del_work); - int ret = 0; mddev->sync_thread = md_register_thread(md_do_sync, mddev, "resync"); if (!mddev->sync_thread) { - if (!(mddev_is_clustered(mddev) && ret == -EAGAIN)) - printk(KERN_ERR "%s: could not start resync" - " thread...\n", - mdname(mddev)); + printk(KERN_ERR "%s: could not start resync thread...\n", + mdname(mddev)); /* leave the spares where they are, it shouldn't hurt */ clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); -- cgit v1.3-18-gd494 From c622ca543bff8e73efacf4dafa0cc9851ecea511 Mon Sep 17 00:00:00 2001 From: Artur Paszkiewicz Date: Tue, 16 Aug 2016 14:26:08 +0200 Subject: md: don't print the same repeated messages about delayed sync operation This fixes a long-standing bug that caused a flood of messages like: "md: delaying data-check of md1 until md2 has finished (they share one or more physical units)" It can be reproduced like this: 1. Create at least 3 raid1 arrays on a pair of disks, each on different partitions. 2. Request a sync operation like 'check' or 'repair' on 2 arrays by writing to their md/sync_action attribute files. One operation should start and one should be delayed and a message like the above will be printed. 3. Issue a write to the third array. Each write will cause 2 copies of the message to be printed. This happens when wake_up(&resync_wait) is called, usually by md_check_recovery(). Then the delayed sync thread again prints the message and is put to sleep. This patch adds a check in md_do_sync() to prevent printing this message more than once for the same pair of devices. Reported-by: Sven Koehler Link: https://bugzilla.kernel.org/show_bug.cgi?id=151801 Signed-off-by: Artur Paszkiewicz Signed-off-by: Shaohua Li --- drivers/md/md.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 19d8e23bda5c..cc25cbcf10b2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7865,6 +7865,7 @@ void md_do_sync(struct md_thread *thread) */ do { + int mddev2_minor = -1; mddev->curr_resync = 2; try_again: @@ -7894,10 +7895,14 @@ void md_do_sync(struct md_thread *thread) prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) && mddev2->curr_resync >= mddev->curr_resync) { - printk(KERN_INFO "md: delaying %s of %s" - " until %s has finished (they" - " share one or more physical units)\n", - desc, mdname(mddev), mdname(mddev2)); + if (mddev2_minor != mddev2->md_minor) { + mddev2_minor = mddev2->md_minor; + printk(KERN_INFO "md: delaying %s of %s" + " until %s has finished (they" + " share one or more physical units)\n", + desc, mdname(mddev), + mdname(mddev2)); + } mddev_put(mddev2); if (signal_pending(current)) flush_signals(current); -- cgit v1.3-18-gd494 From 059e232089e45b0befc9933d31209c225e08b426 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 9 Aug 2016 07:50:44 +0100 Subject: irqchip/gic: Allow self-SGIs for SMP on UP configurations On systems where a single CPU is present, the GIC may not support having SGIs delivered to a target list. In that case, we use the self-SGI mechanism to allow the interrupt to be delivered locally. Tested-by: Fabio Estevam Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c index c2cab572c511..390fac59c6bc 100644 --- a/drivers/irqchip/irq-gic.c +++ b/drivers/irqchip/irq-gic.c @@ -769,6 +769,13 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) int cpu; unsigned long flags, map = 0; + if (unlikely(nr_cpu_ids == 1)) { + /* Only one CPU? let's do a self-IPI... */ + writel_relaxed(2 << 24 | irq, + gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); + return; + } + raw_spin_lock_irqsave(&irq_controller_lock, flags); /* Convert our logical CPU mask into a physical one. */ -- cgit v1.3-18-gd494 From ccd9432a5c85f35df7b491a1b701560d247466a5 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 17 Aug 2016 13:49:19 +0100 Subject: irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts As per the GICv3 specification, to power down a processor using GICv3 and allow automatic power-on if an interrupt must be sent to a processor, software must set Enable to zero for all interrupt groups(by writing to GICC_CTLR or ICC_IGRPEN{0,1}_EL1/3 as appropriate. When commit 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier") was introduced there were no firmware implementations(in particular PSCI) handling this. Linux kernel may not be aware of the CPU power state details and might fail to identify the power states that require quiescing the CPU interface. Even if it can be aware of those details, it can't determine which CPU power state have been triggered at the platform level and how the power control is implemented. This patch make disabling redistributor and group1 non-secure interrupts in the power down path and re-enabling of redistributor in the power-up path conditional. It will be handled in the kernel if and only if the non-secure accesses are permitted to access and modify control registers. It is left to the platform implementation otherwise. Cc: Marc Zyngier Cc: Lorenzo Pieralisi Cc: Thomas Gleixner Cc: Jason Cooper Tested-by: Christopher Covington Signed-off-by: Sudeep Holla Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 6fc56c3466b0..ede5672ab34d 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -667,13 +667,20 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, #endif #ifdef CONFIG_CPU_PM +/* Check whether it's single security state view */ +static bool gic_dist_security_disabled(void) +{ + return readl_relaxed(gic_data.dist_base + GICD_CTLR) & GICD_CTLR_DS; +} + static int gic_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd, void *v) { if (cmd == CPU_PM_EXIT) { - gic_enable_redist(true); + if (gic_dist_security_disabled()) + gic_enable_redist(true); gic_cpu_sys_reg_init(); - } else if (cmd == CPU_PM_ENTER) { + } else if (cmd == CPU_PM_ENTER && gic_dist_security_disabled()) { gic_write_grpen1(0); gic_enable_redist(false); } -- cgit v1.3-18-gd494 From b825b44c4ef4dabfdaf4e82db2263d377ac45d67 Mon Sep 17 00:00:00 2001 From: Jay Freyensee Date: Wed, 17 Aug 2016 15:00:25 -0700 Subject: nvmet-rdma: +1 to *queue_size from hsqsize/hrqsize The host will be sending sqsize 0-based hsqsize value, the target need to be adjusted as well. Signed-off-by: Jay Freyensee Reviewed-by: Sagi Grimberg Signed-off-by: Sagi Grimberg --- drivers/nvme/target/rdma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 5de8d0a0db58..1cbe6e053b5b 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -1004,10 +1004,10 @@ nvmet_rdma_parse_cm_connect_req(struct rdma_conn_param *conn, queue->host_qid = le16_to_cpu(req->qid); /* - * req->hsqsize corresponds to our recv queue size + * req->hsqsize corresponds to our recv queue size plus 1 * req->hrqsize corresponds to our send queue size */ - queue->recv_queue_size = le16_to_cpu(req->hsqsize); + queue->recv_queue_size = le16_to_cpu(req->hsqsize) + 1; queue->send_queue_size = le16_to_cpu(req->hrqsize); if (!queue->host_qid && queue->recv_queue_size > NVMF_AQ_DEPTH) -- cgit v1.3-18-gd494 From f994d9dc28bc27353acde2caaf718222d92a3e24 Mon Sep 17 00:00:00 2001 From: Jay Freyensee Date: Wed, 17 Aug 2016 15:00:26 -0700 Subject: fabrics: define admin sqsize min default, per spec Upon admin queue connect(), the rdma qp was being set based on NVMF_AQ_DEPTH. However, the fabrics layer was using the sqsize field value set for I/O queues for the admin queue, which threw the nvme layer and rdma layer off-whack: root@fedora23-fabrics-host1 nvmf]# dmesg [ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize being sent is: 128 [ 3507.798858] nvme nvme0: creating 16 I/O queues. [ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr 192.168.1.3:4420 Thus, to have a different admin queue value, we use NVMF_AQ_DEPTH for connect() and RDMA private data as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec (and in that RDMA private data we treat hrqsize as 1's-based value, per current understanding of the fabrics spec). Reported-by: Daniel Verkamp Signed-off-by: Jay Freyensee Reviewed-by: Daniel Verkamp Signed-off-by: Sagi Grimberg --- drivers/nvme/host/fabrics.c | 9 ++++++++- drivers/nvme/host/rdma.c | 13 +++++++++++-- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index dc996761042f..020302c6ea57 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -363,7 +363,14 @@ int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl) cmd.connect.opcode = nvme_fabrics_command; cmd.connect.fctype = nvme_fabrics_type_connect; cmd.connect.qid = 0; - cmd.connect.sqsize = cpu_to_le16(ctrl->sqsize); + + /* + * fabrics spec sets a minimum of depth 32 for admin queue, + * so set the queue with this depth always until + * justification otherwise. + */ + cmd.connect.sqsize = cpu_to_le16(NVMF_AQ_DEPTH - 1); + /* * Set keep-alive timeout in seconds granularity (ms * 1000) * and add a grace period for controller kato enforcement diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 9c69393f6d1f..d44809e6b03f 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1278,8 +1278,17 @@ static int nvme_rdma_route_resolved(struct nvme_rdma_queue *queue) priv.recfmt = cpu_to_le16(NVME_RDMA_CM_FMT_1_0); priv.qid = cpu_to_le16(nvme_rdma_queue_idx(queue)); - priv.hrqsize = cpu_to_le16(queue->queue_size); - priv.hsqsize = cpu_to_le16(queue->queue_size); + /* + * set the admin queue depth to the minimum size + * specified by the Fabrics standard. + */ + if (priv.qid == 0) { + priv.hrqsize = cpu_to_le16(NVMF_AQ_DEPTH); + priv.hsqsize = cpu_to_le16(NVMF_AQ_DEPTH - 1); + } else { + priv.hrqsize = cpu_to_le16(queue->queue_size); + priv.hsqsize = cpu_to_le16(queue->queue_size); + } ret = rdma_connect(queue->cm_id, ¶m); if (ret) { -- cgit v1.3-18-gd494 From c5af8654c422cfdd8480be3a244748e18cace6c5 Mon Sep 17 00:00:00 2001 From: Jay Freyensee Date: Wed, 17 Aug 2016 15:00:27 -0700 Subject: nvme-rdma: fix sqsize/hsqsize per spec Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as a 0-based value. Also per spec, the RDMA binding values shall be set to sqsize, which makes hsqsize 0-based values. Thus, the sqsize during NVMf connect() is now: [root@fedora23-fabrics-host1 for-48]# dmesg [ 318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for admin queue: 31 [ 318.720884] nvme nvme0: creating 16 I/O queues. [ 318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o queue: 127 Finally, current interpretation implies hrqsize is 1's based so set it appropriately. Reported-by: Daniel Verkamp Signed-off-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index d44809e6b03f..c133256fd745 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -645,7 +645,8 @@ static int nvme_rdma_init_io_queues(struct nvme_rdma_ctrl *ctrl) int i, ret; for (i = 1; i < ctrl->queue_count; i++) { - ret = nvme_rdma_init_queue(ctrl, i, ctrl->ctrl.sqsize); + ret = nvme_rdma_init_queue(ctrl, i, + ctrl->ctrl.opts->queue_size); if (ret) { dev_info(ctrl->ctrl.device, "failed to initialize i/o queue: %d\n", ret); @@ -1286,8 +1287,13 @@ static int nvme_rdma_route_resolved(struct nvme_rdma_queue *queue) priv.hrqsize = cpu_to_le16(NVMF_AQ_DEPTH); priv.hsqsize = cpu_to_le16(NVMF_AQ_DEPTH - 1); } else { + /* + * current interpretation of the fabrics spec + * is at minimum you make hrqsize sqsize+1, or a + * 1's based representation of sqsize. + */ priv.hrqsize = cpu_to_le16(queue->queue_size); - priv.hsqsize = cpu_to_le16(queue->queue_size); + priv.hsqsize = cpu_to_le16(queue->ctrl->ctrl.sqsize); } ret = rdma_connect(queue->cm_id, ¶m); @@ -1825,7 +1831,7 @@ static int nvme_rdma_create_io_queues(struct nvme_rdma_ctrl *ctrl) memset(&ctrl->tag_set, 0, sizeof(ctrl->tag_set)); ctrl->tag_set.ops = &nvme_rdma_mq_ops; - ctrl->tag_set.queue_depth = ctrl->ctrl.sqsize; + ctrl->tag_set.queue_depth = ctrl->ctrl.opts->queue_size; ctrl->tag_set.reserved_tags = 1; /* fabric connect */ ctrl->tag_set.numa_node = NUMA_NO_NODE; ctrl->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; @@ -1923,7 +1929,7 @@ static struct nvme_ctrl *nvme_rdma_create_ctrl(struct device *dev, spin_lock_init(&ctrl->lock); ctrl->queue_count = opts->nr_io_queues + 1; /* +1 for admin queue */ - ctrl->ctrl.sqsize = opts->queue_size; + ctrl->ctrl.sqsize = opts->queue_size - 1; ctrl->ctrl.kato = opts->kato; ret = -ENOMEM; -- cgit v1.3-18-gd494 From eadb7cf44105ae8250f0d638dc880c3ed511c4e2 Mon Sep 17 00:00:00 2001 From: Jay Freyensee Date: Wed, 17 Aug 2016 15:00:28 -0700 Subject: nvme-loop: set sqsize to 0-based value, per spec Signed-off-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- drivers/nvme/target/loop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 7affd40a6b33..395e60dad835 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -556,7 +556,7 @@ static int nvme_loop_create_io_queues(struct nvme_loop_ctrl *ctrl) memset(&ctrl->tag_set, 0, sizeof(ctrl->tag_set)); ctrl->tag_set.ops = &nvme_loop_mq_ops; - ctrl->tag_set.queue_depth = ctrl->ctrl.sqsize; + ctrl->tag_set.queue_depth = ctrl->ctrl.opts->queue_size; ctrl->tag_set.reserved_tags = 1; /* fabric connect */ ctrl->tag_set.numa_node = NUMA_NO_NODE; ctrl->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; @@ -620,7 +620,7 @@ static struct nvme_ctrl *nvme_loop_create_ctrl(struct device *dev, ret = -ENOMEM; - ctrl->ctrl.sqsize = opts->queue_size; + ctrl->ctrl.sqsize = opts->queue_size - 1; ctrl->ctrl.kato = opts->kato; ctrl->queues = kcalloc(opts->nr_io_queues + 1, sizeof(*ctrl->queues), -- cgit v1.3-18-gd494 From 815806e39bf6f7e7b34875d4a9609dbe76661782 Mon Sep 17 00:00:00 2001 From: Elaine Zhang Date: Thu, 18 Aug 2016 17:01:55 +0800 Subject: regmap: drop cache if the bus transfer error regmap_write ->_regmap_raw_write -->regcache_write first and than use map->bus->write to wirte i2c or spi But if the i2c or spi transfer failed, But the cache is updated, So if I use regmap_read will get the cache data which is not the real register value. Signed-off-by: Elaine Zhang Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 51fa7d66a393..25d26bb18970 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1474,6 +1474,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg, ret = map->bus->write(map->bus_context, buf, len); kfree(buf); + } else if (ret != 0 && !map->cache_bypass && map->format.parse_val) { + regcache_drop_region(map, reg, reg + 1); } trace_regmap_hw_write_done(map, reg, val_len / map->format.val_bytes); -- cgit v1.3-18-gd494 From c81396f3da22aa8f1e8fbf7943616a0839c4d63d Mon Sep 17 00:00:00 2001 From: Cathy Luo Date: Thu, 21 Jul 2016 16:30:24 +0530 Subject: mwifiex: fix large amsdu packets causing firmware hang Sometimes host prepares and downloads a large amsdu packet to firmware which leads to a memory corruption in firmware. The reason is __dev_alloc_skb() may allocate larger buffer than required size. This patch solves the problem by checking "adapter->tx_buf_size" instead of relying on skb_tailroom(). Signed-off-by: Cathy Luo Signed-off-by: Amitkumar Karwar Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/11n_aggr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/marvell/mwifiex/11n_aggr.c b/drivers/net/wireless/marvell/mwifiex/11n_aggr.c index dc49c3de1f25..c47d6366875d 100644 --- a/drivers/net/wireless/marvell/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/marvell/mwifiex/11n_aggr.c @@ -205,7 +205,8 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, do { /* Check if AMSDU can accommodate this MSDU */ - if (skb_tailroom(skb_aggr) < (skb_src->len + LLC_SNAP_LEN)) + if ((skb_aggr->len + skb_src->len + LLC_SNAP_LEN) > + adapter->tx_buf_size) break; skb_src = skb_dequeue(&pra_list->skb_head); -- cgit v1.3-18-gd494 From 5d0bdf2867825a92c0a563957a2fb059149ab0d4 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 11 Aug 2016 07:11:05 -0700 Subject: PCI: Call pci_intx() when using legacy interrupts in pci_alloc_irq_vectors() ahci currently insists on an explicit call to pci_intx() before falling back from MSI or MSI-X to legacy IRQs. As pci_intx() is a no-op if the command register already contains the right value it seems safe and useful to add this call to pci_alloc_irq_vectors() so that ahci can just use pci_alloc_irq_vectors(). Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas --- drivers/pci/msi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 9233e7f62f47..593698e11f96 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -1200,8 +1200,11 @@ int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs, } /* use legacy irq if allowed */ - if ((flags & PCI_IRQ_LEGACY) && min_vecs == 1) + if ((flags & PCI_IRQ_LEGACY) && min_vecs == 1) { + pci_intx(dev, 1); return 1; + } + return vecs; } EXPORT_SYMBOL(pci_alloc_irq_vectors); -- cgit v1.3-18-gd494 From ae5b80d2b68eac945b124227dea34462118a6f01 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 18 Aug 2016 11:51:14 +0200 Subject: drm/radeon: only apply the SS fractional workaround to RS[78]80 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099 Reviewed-by: Alex Deucher Signed-off-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index a97abc8af657..1dcf39084555 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -627,7 +627,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (radeon_crtc->ss.refdiv) { radeon_crtc->pll_flags |= RADEON_PLL_USE_REF_DIV; radeon_crtc->pll_reference_div = radeon_crtc->ss.refdiv; - if (rdev->family >= CHIP_RV770) + if (ASIC_IS_AVIVO(rdev) && + rdev->family != CHIP_RS780 && + rdev->family != CHIP_RS880) radeon_crtc->pll_flags |= RADEON_PLL_USE_FRAC_FB_DIV; } } -- cgit v1.3-18-gd494 From 51c70261b2575962cb9406cd92246b1cee6a3c71 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Aug 2016 17:21:37 +0200 Subject: Revert "android: binder: fix dangling pointer comparison" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 7b142d8fd0bd4c9bf06ccb72ac4daedb503f0124. It doesn't seem to be correct, no one seems to have tested it, and the email address of the submitter now bounces :( So revert it. Cc: Jann Horn Cc: Chen Feng Cc: stable Cc: Arve Hjønnevåg Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 09fdb425e2f5..16288e777ec3 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2962,7 +2962,6 @@ static int binder_open(struct inode *nodp, struct file *filp) return -ENOMEM; get_task_struct(current); proc->tsk = current; - atomic_inc(¤t->mm->mm_count); proc->vma_vm_mm = current->mm; INIT_LIST_HEAD(&proc->todo); init_waitqueue_head(&proc->wait); @@ -3168,7 +3167,6 @@ static void binder_deferred_release(struct binder_proc *proc) vfree(proc->buffer); } - mmdrop(proc->vma_vm_mm); put_task_struct(proc->tsk); binder_debug(BINDER_DEBUG_OPEN_CLOSE, -- cgit v1.3-18-gd494 From 87a713c8ffca33d8e497a8b6c02034332bd80394 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:13 +0200 Subject: 8250/fintek: rename IRQ_MODE macro A bugfix for the fintek driver required defining some macros, but one of them clashes with a system header on ARM: drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror] #define IRQ_MODE 0x70 In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0, from /git/arm-soc/arch/arm/include/asm/irqflags.h:6, from /git/arm-soc/include/linux/irqflags.h:15, from /git/arm-soc/arch/arm/include/asm/bitops.h:27, from /git/arm-soc/include/linux/bitops.h:36, from /git/arm-soc/include/linux/kernel.h:10, from /git/arm-soc/include/linux/list.h:8, from /git/arm-soc/include/linux/module.h:9, from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11: arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE. Signed-off-by: Arnd Bergmann Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode") Link: https://patchwork.kernel.org/patch/9200119/ Acked-by: Ji-Ze Hong (Peter Hong) Acked-by: Ricardo Ribalda Delgado Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_fintek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 737b4b3957b0..0facc789fe7d 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -31,7 +31,7 @@ #define IO_ADDR2 0x60 #define LDN 0x7 -#define IRQ_MODE 0x70 +#define FINTEK_IRQ_MODE 0x70 #define IRQ_SHARE BIT(4) #define IRQ_MODE_MASK (BIT(6) | BIT(5)) #define IRQ_LEVEL_LOW 0 @@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode) outb(LDN, pdata->base_port + ADDR_PORT); outb(pdata->index, pdata->base_port + DATA_PORT); - outb(IRQ_MODE, pdata->base_port + ADDR_PORT); + outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT); tmp = inb(pdata->base_port + DATA_PORT); tmp &= ~IRQ_MODE_MASK; -- cgit v1.3-18-gd494 From c4e94174983a86c935be1537a73e496b778b0287 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Tue, 16 Aug 2016 19:19:11 +0800 Subject: usb: chipidea: udc: don't touch DP when controller is in host mode When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Cc: # 4.1+ Signed-off-by: Li Jun Signed-off-by: Peter Chen --- drivers/usb/chipidea/udc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 065f5d97aa67..dfec5a176315 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1596,8 +1596,11 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - /* Data+ pullup controlled by OTG state machine in OTG fsm mode */ - if (ci_otg_is_fsm_mode(ci)) + /* + * Data+ pullup controlled by OTG state machine in OTG fsm mode; + * and don't touch Data+ in host mode for dual role config. + */ + if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST) return 0; pm_runtime_get_sync(&ci->gadget.dev); -- cgit v1.3-18-gd494 From 835831c57e9b0cccc24e96a812542875471d75b5 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 17 Aug 2016 11:46:17 +0200 Subject: scsi: ses: use scsi_is_sas_rphy instead of is_sas_attached Use scsi_is_sas_rphy() instead of is_sas_attached() to decide whether we should obtain the SAS address from a scsi device or not. This will prevent us from tripping on the BUG_ON() in sas_sdev_to_rdev() if the rphy isn't attached to the SAS transport class, like it is with hpsa's logical devices. Fixes: 3f8d6f2a0 ('ses: fix discovery of SATA devices in SAS enclosures') Signed-off-by: Johannes Thumshirn Reviewed-by: James E.J. Bottomley Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 0e8601aa877a..8c9a35c91705 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -587,7 +587,7 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, ses_enclosure_data_process(edev, to_scsi_device(edev->edev.parent), 0); - if (is_sas_attached(sdev)) + if (scsi_is_sas_rphy(&sdev->sdev_gendev)) efd.addr = sas_get_address(sdev); if (efd.addr) { -- cgit v1.3-18-gd494 From a0f81dbeef13aa0aeaa8b955b38735dbf09de392 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 17 Aug 2016 11:46:18 +0200 Subject: scsi: sas: remove is_sas_attached() As there are no more users of is_sas_attached() left, remove it. Signed-off-by: Johannes Thumshirn Reviewed-by: James E.J. Bottomley Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_transport_sas.c | 16 ---------------- include/scsi/scsi_transport_sas.h | 6 ------ 2 files changed, 22 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 3f0ff072184b..60b651bfaa01 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -340,22 +340,6 @@ static int do_sas_phy_delete(struct device *dev, void *data) return 0; } -/** - * is_sas_attached - check if device is SAS attached - * @sdev: scsi device to check - * - * returns true if the device is SAS attached - */ -int is_sas_attached(struct scsi_device *sdev) -{ - struct Scsi_Host *shost = sdev->host; - - return shost->transportt->host_attrs.ac.class == - &sas_host_class.class; -} -EXPORT_SYMBOL(is_sas_attached); - - /** * sas_remove_children - tear down a devices SAS data structures * @dev: device belonging to the sas object diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 31ae074dad9d..73d870918939 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -11,17 +11,11 @@ struct sas_rphy; struct request; #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS) -static inline int is_sas_attached(struct scsi_device *sdev) -{ - return 0; -} - static inline int scsi_is_sas_rphy(const struct device *sdev) { return 0; } #else -extern int is_sas_attached(struct scsi_device *sdev); extern int scsi_is_sas_rphy(const struct device *); #endif -- cgit v1.3-18-gd494 From d9dc1702b297ec4a6bb9c0326a70641b322ba886 Mon Sep 17 00:00:00 2001 From: Eric Wheeler Date: Fri, 17 Jun 2016 15:01:54 -0700 Subject: bcache: register_bcache(): call blkdev_put() when cache_alloc() fails register_cache() is supposed to return an error string on error so that register_bcache() will will blkdev_put and cleanup other user counters, but it does not set 'char *err' when cache_alloc() fails (eg, due to memory pressure) and thus register_bcache() performs no cleanup. register_bcache() <----------\ <- no jump to err_close, no blkdev_put() | | +->register_cache() | <- fails to set char *err | | +->cache_alloc() ---/ <- returns error This patch sets `char *err` for this failure case so that register_cache() will cause register_bcache() to correctly jump to err_close and do cleanup. This was tested under OOM conditions that triggered the bug. Signed-off-by: Eric Wheeler Cc: Kent Overstreet Cc: stable@vger.kernel.org --- drivers/md/bcache/super.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 95a4ca6ce6ff..6ada14b9a157 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -1844,7 +1844,7 @@ static int register_cache(struct cache_sb *sb, struct page *sb_page, struct block_device *bdev, struct cache *ca) { char name[BDEVNAME_SIZE]; - const char *err = NULL; + const char *err = NULL; /* must be set for any error case */ int ret = 0; memcpy(&ca->sb, sb, sizeof(struct cache_sb)); @@ -1861,8 +1861,13 @@ static int register_cache(struct cache_sb *sb, struct page *sb_page, ca->discard = CACHE_DISCARD(&ca->sb); ret = cache_alloc(ca); - if (ret != 0) + if (ret != 0) { + if (ret == -ENOMEM) + err = "cache_alloc(): -ENOMEM"; + else + err = "cache_alloc(): unknown error"; goto err; + } if (kobject_add(&ca->kobj, &part_to_dev(bdev->bd_part)->kobj, "bcache")) { err = "error calling kobject_add"; -- cgit v1.3-18-gd494 From acc9cf8c66c66b2cbbdb4a375537edee72be64df Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Wed, 17 Aug 2016 18:21:24 -0700 Subject: bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two. This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [] schedule+0x37/0x90 [ 720.732963] [] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [] ? __schedule+0x2dc/0x950 [ 720.735884] [] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [] schedule+0x37/0x90 [ 720.715805] [] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [] kobj_attr_store+0xf/0x20 [ 720.721730] [] sysfs_kf_write+0x3d/0x50 [ 720.722327] [] kernfs_fop_write+0x12a/0x180 [ 720.722904] [] __vfs_write+0x37/0x110 [ 720.723503] [] ? __sb_start_write+0x58/0x110 [ 720.724100] [] ? security_file_permission+0x23/0xa0 [ 720.724675] [] vfs_write+0xa9/0x1b0 [ 720.725275] [] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [] SyS_write+0x55/0xd0 [ 720.726451] [] ? do_page_fault+0x30/0x80 [ 720.727045] [] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by: Kent Overstreet Tested-by: Eric Wheeler Cc: stable@vger.kernel.org --- drivers/md/bcache/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 6ada14b9a157..6b93e1b77767 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -1820,7 +1820,7 @@ static int cache_alloc(struct cache *ca) free = roundup_pow_of_two(ca->sb.nbuckets) >> 10; if (!init_fifo(&ca->free[RESERVE_BTREE], 8, GFP_KERNEL) || - !init_fifo(&ca->free[RESERVE_PRIO], prio_buckets(ca), GFP_KERNEL) || + !init_fifo_exact(&ca->free[RESERVE_PRIO], prio_buckets(ca), GFP_KERNEL) || !init_fifo(&ca->free[RESERVE_MOVINGGC], free, GFP_KERNEL) || !init_fifo(&ca->free[RESERVE_NONE], free, GFP_KERNEL) || !init_fifo(&ca->free_inc, free << 2, GFP_KERNEL) || -- cgit v1.3-18-gd494 From 90706094d5be614ae7285b3c96c3125bb198618c Mon Sep 17 00:00:00 2001 From: Eric Wheeler Date: Thu, 18 Aug 2016 20:15:26 -0700 Subject: bcache: pr_err: more meaningful error message when nr_stripes is invalid The original error was thought to be corruption, but was actually caused by: make-bcache --data-offset N where N was in bytes and should have been in sectors. While userspace tools should be updated to check --data-offset beyond end of volume, hopefully this will help others that might not have noticed the units. Signed-off-by: Eric Wheeler Cc: Kent Overstreet --- drivers/md/bcache/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 6b93e1b77767..849ad441cd76 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -760,7 +760,8 @@ static int bcache_device_init(struct bcache_device *d, unsigned block_size, if (!d->nr_stripes || d->nr_stripes > INT_MAX || d->nr_stripes > SIZE_MAX / sizeof(atomic_t)) { - pr_err("nr_stripes too large"); + pr_err("nr_stripes too large or invalid: %u (start sector beyond end of disk?)", + (unsigned)d->nr_stripes); return -ENOMEM; } -- cgit v1.3-18-gd494 From 039a392733600d35c80d406a98151b2a9a0a74b4 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Tue, 16 Aug 2016 18:40:18 +0300 Subject: qede: Fix Tx timeout due to xmit_more Driver uses netif_tx_queue_stopped() to make sure the xmit_more indication will be honored, but that only checks for DRV_XOFF. At the same time, it's possible that during transmission the DQL will close the transmission queue with STACK_XOFF indication. In re-configuration flows, when the threshold is relatively low, it's possible that the device has no pending tranmissions, and during tranmission the driver would miss doorbelling the HW. Since there are no pending transmission, there will never be a Tx completion [and thus the DQL would not remove the STACK_XOFF indication], eventually causing the Tx queue to timeout. While we're at it - also doorbell in case driver has to close the transmission queue on its own [although this one is less important - if the ring is full, we're bound to receive completion eventually, which means the doorbell would only be postponed and not indefinetly blocked]. Fixes: 312e06761c99 ("qede: Utilize xmit_more") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index e4bd02e46e57..a6eb6af8cbe8 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -722,11 +722,14 @@ netdev_tx_t qede_start_xmit(struct sk_buff *skb, txq->tx_db.data.bd_prod = cpu_to_le16(qed_chain_get_prod_idx(&txq->tx_pbl)); - if (!skb->xmit_more || netif_tx_queue_stopped(netdev_txq)) + if (!skb->xmit_more || netif_xmit_stopped(netdev_txq)) qede_update_tx_producer(txq); if (unlikely(qed_chain_get_elem_left(&txq->tx_pbl) < (MAX_SKB_FRAGS + 1))) { + if (skb->xmit_more) + qede_update_tx_producer(txq); + netif_tx_stop_queue(netdev_txq); DP_VERBOSE(edev, NETIF_MSG_TX_QUEUED, "Stop queue was called\n"); -- cgit v1.3-18-gd494 From 1423661fed2c40d6d71b5e2e3aa390f85157f9d5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 16 Aug 2016 13:30:36 -0700 Subject: net: thunderx: Fix OOPs with ethtool --register-dump The ethtool_ops .get_regs function attempts to read the nonexistent register NIC_QSET_SQ_0_7_CNM_CHG, which produces a "bus error" type OOPs. Fix by not attempting to read, and removing the definition of, NIC_QSET_SQ_0_7_CNM_CHG. A zero is written into the register dump to keep the layout unchanged. Signed-off-by: David Daney Cc: # 4.4.x- Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_reg.h | 1 - drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c | 5 ++++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/nic_reg.h b/drivers/net/ethernet/cavium/thunder/nic_reg.h index afb10e326b4f..fab35a593898 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_reg.h +++ b/drivers/net/ethernet/cavium/thunder/nic_reg.h @@ -170,7 +170,6 @@ #define NIC_QSET_SQ_0_7_DOOR (0x010838) #define NIC_QSET_SQ_0_7_STATUS (0x010840) #define NIC_QSET_SQ_0_7_DEBUG (0x010848) -#define NIC_QSET_SQ_0_7_CNM_CHG (0x010860) #define NIC_QSET_SQ_0_7_STAT_0_1 (0x010900) #define NIC_QSET_RBDR_0_1_CFG (0x010C00) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c b/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c index d2d8ef270142..ad4fddb55421 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c @@ -382,7 +382,10 @@ static void nicvf_get_regs(struct net_device *dev, p[i++] = nicvf_queue_reg_read(nic, NIC_QSET_SQ_0_7_DOOR, q); p[i++] = nicvf_queue_reg_read(nic, NIC_QSET_SQ_0_7_STATUS, q); p[i++] = nicvf_queue_reg_read(nic, NIC_QSET_SQ_0_7_DEBUG, q); - p[i++] = nicvf_queue_reg_read(nic, NIC_QSET_SQ_0_7_CNM_CHG, q); + /* Padding, was NIC_QSET_SQ_0_7_CNM_CHG, which + * produces bus errors when read + */ + p[i++] = 0; p[i++] = nicvf_queue_reg_read(nic, NIC_QSET_SQ_0_7_STAT_0_1, q); reg_offset = NIC_QSET_SQ_0_7_STAT_0_1 | (1 << 3); p[i++] = nicvf_queue_reg_read(nic, reg_offset, q); -- cgit v1.3-18-gd494 From e0d8b2908696d30583ae5764e33332e71cbbccc9 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Wed, 17 Aug 2016 14:09:28 +0530 Subject: cxgb4: Fixes resource allocation for ULD's in kdump kernel At present the code to check in kdump kernel was not disabling allocation of resources when CONFIG_CHELSIO_T4_DCB is defined, move the code outside #defines so that it gets disabled irrespective of #define, when in kdump kernel. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c45de49dc963..c762a8c8c954 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4335,6 +4335,11 @@ static void cfg_queues(struct adapter *adap) #endif int ciq_size; + /* Reduce memory usage in kdump environment, disable all offload. + */ + if (is_kdump_kernel()) + adap->params.offload = 0; + for_each_port(adap, i) n10g += is_x_10g_port(&adap2pinfo(adap, i)->link_cfg); #ifdef CONFIG_CHELSIO_T4_DCB @@ -4365,11 +4370,6 @@ static void cfg_queues(struct adapter *adap) if (q10g > netif_get_num_default_rss_queues()) q10g = netif_get_num_default_rss_queues(); - /* Reduce memory usage in kdump environment, disable all offload. - */ - if (is_kdump_kernel()) - adap->params.offload = 0; - for_each_port(adap, i) { struct port_info *pi = adap2pinfo(adap, i); -- cgit v1.3-18-gd494 From b9f63ae7ba2de2ba19137c5757c0607ce40f3ed5 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 17 Aug 2016 15:37:14 +0200 Subject: net: bgmac: fix reversed check for MII registration error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was failing on successful registration returning meaningless errors. Signed-off-by: Rafał Miłecki Fixes: 55954f3bfdac ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac-bcma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bgmac-bcma.c b/drivers/net/ethernet/broadcom/bgmac-bcma.c index 9a9745c4047c..625235db644f 100644 --- a/drivers/net/ethernet/broadcom/bgmac-bcma.c +++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c @@ -159,7 +159,7 @@ static int bgmac_probe(struct bcma_device *core) if (!bgmac_is_bcm4707_family(core)) { mii_bus = bcma_mdio_mii_register(core, bgmac->phyaddr); - if (!IS_ERR(mii_bus)) { + if (IS_ERR(mii_bus)) { err = PTR_ERR(mii_bus); goto err; } -- cgit v1.3-18-gd494 From 60bcabd080f53561efa9288be45c128feda1a8bb Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 17 Aug 2016 15:51:55 +0200 Subject: kaweth: fix firmware download This fixes the oops discovered by the Umap2 project and Alan Stern. The intf member needs to be set before the firmware is downloaded. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/kaweth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 770212baaf05..37bf715ab53b 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -1029,6 +1029,7 @@ static int kaweth_probe( kaweth = netdev_priv(netdev); kaweth->dev = udev; kaweth->net = netdev; + kaweth->intf = intf; spin_lock_init(&kaweth->device_lock); init_waitqueue_head(&kaweth->term_wait); @@ -1139,8 +1140,6 @@ err_fw: dev_dbg(dev, "Initializing net device.\n"); - kaweth->intf = intf; - kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL); if (!kaweth->tx_urb) goto err_free_netdev; -- cgit v1.3-18-gd494 From 575ced7f8090c1a4e91e2daf8da9352a6a1fc7a7 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 17 Aug 2016 15:51:56 +0200 Subject: kaweth: fix oops upon failed memory allocation Just return an error upon failure. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/kaweth.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 37bf715ab53b..528b9c9c4e60 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -1009,6 +1009,7 @@ static int kaweth_probe( struct net_device *netdev; const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; int result = 0; + int rv = -EIO; dev_dbg(dev, "Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x\n", @@ -1049,6 +1050,10 @@ static int kaweth_probe( /* Download the firmware */ dev_info(dev, "Downloading firmware...\n"); kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL); + if (!kaweth->firmware_buf) { + rv = -ENOMEM; + goto err_free_netdev; + } if ((result = kaweth_download_firmware(kaweth, "kaweth/new_code.bin", 100, @@ -1203,7 +1208,7 @@ err_only_tx: err_free_netdev: free_netdev(netdev); - return -EIO; + return rv; } /**************************************************************** -- cgit v1.3-18-gd494 From 76507fdfc9b629209ae20cd469da2f6d093a507c Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 7 Aug 2016 21:01:48 +0200 Subject: dmaengine: pxa_dma: fix hotchain corner case In the case where a descriptor is chained on a running channel, and as explained in the comment in the code 10 lines above, the success of the chaining is ensured either if : - the DMA is still running - or if the chained transfer is completed Unfortunately the transfer completness test was done on the descriptor to which the transfer was chained, and not the transfer being chained at the end, ie. hot-chained. This corner case is extremely hard to trigger, as usually the DMA chain is still running, and the first case takes care of returning success of the hot-chaining. It was seen by hot-chaining several "small transfers" to a running "big transfer", not in a real-life usecase but by testing the robustness of the driver. Signed-off-by: Robert Jarzmik Signed-off-by: Vinod Koul --- drivers/dma/pxa_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index dc7850a422b8..2093e528ae00 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -638,7 +638,7 @@ static bool pxad_try_hotchain(struct virt_dma_chan *vc, vd_last_issued = list_entry(vc->desc_issued.prev, struct virt_dma_desc, node); pxad_desc_chain(vd_last_issued, vd); - if (is_chan_running(chan) || is_desc_completed(vd_last_issued)) + if (is_chan_running(chan) || is_desc_completed(vd)) return true; } -- cgit v1.3-18-gd494 From e633fc7a1347528c3b4a6bbdeb41f5d63988242c Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 11 Aug 2016 17:44:05 +0100 Subject: iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks Due to the attribute bits being all over the place in the different types of short-descriptor PTEs, when remapping an existing entry, e.g. splitting a section into pages, we take the approach of decomposing the PTE attributes back to the IOMMU API flags to start from scratch. On inspection, though, the existing code seems to have got the read-only bit backwards and ignored the XN bit. How embarrassing... Fortunately the primary user so far, the Mediatek IOMMU, both never splits blocks (because it only serves non-overlapping DMA API calls) and also ignores permissions anyway, but let's put things right before any future users trip up. Cc: Fixes: e5fc9753b1a8 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Signed-off-by: Robin Murphy Signed-off-by: Will Deacon --- drivers/iommu/io-pgtable-arm-v7s.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c index 8c6139986d7d..def8ca1c982d 100644 --- a/drivers/iommu/io-pgtable-arm-v7s.c +++ b/drivers/iommu/io-pgtable-arm-v7s.c @@ -286,12 +286,14 @@ static int arm_v7s_pte_to_prot(arm_v7s_iopte pte, int lvl) int prot = IOMMU_READ; arm_v7s_iopte attr = pte >> ARM_V7S_ATTR_SHIFT(lvl); - if (attr & ARM_V7S_PTE_AP_RDONLY) + if (!(attr & ARM_V7S_PTE_AP_RDONLY)) prot |= IOMMU_WRITE; if ((attr & (ARM_V7S_TEX_MASK << ARM_V7S_TEX_SHIFT)) == 0) prot |= IOMMU_MMIO; else if (pte & ARM_V7S_ATTR_C) prot |= IOMMU_CACHE; + if (pte & ARM_V7S_ATTR_XN(lvl)) + prot |= IOMMU_NOEXEC; return prot; } -- cgit v1.3-18-gd494 From aea2037e0d3e23c3be1498feae29f71ca997d9e6 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 29 Jul 2016 11:15:37 +0100 Subject: iommu/arm-smmu: Fix CMDQ error handling In the unlikely event of a global command queue error, the ARM SMMUv3 driver attempts to convert the problematic command into a CMD_SYNC and resume the command queue. Unfortunately, this code is pretty badly broken: 1. It uses the index into the error string table as the CMDQ index, so we probably read the wrong entry out of the queue 2. The arguments to queue_write are the wrong way round, so we end up writing from the queue onto the stack. These happily cancel out, so the kernel is likely to stay alive, but the command queue will probably fault again when we resume. This patch fixes the error handling code to use the correct queue index and write back the CMD_SYNC to the faulting entry. Cc: Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reported-by: Diwakar Subraveti Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu-v3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index ce801170d5f2..330623f8e344 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -879,7 +879,7 @@ static void arm_smmu_cmdq_skip_err(struct arm_smmu_device *smmu) * We may have concurrent producers, so we need to be careful * not to touch any of the shadow cmdq state. */ - queue_read(cmd, Q_ENT(q, idx), q->ent_dwords); + queue_read(cmd, Q_ENT(q, cons), q->ent_dwords); dev_err(smmu->dev, "skipping command in error state:\n"); for (i = 0; i < ARRAY_SIZE(cmd); ++i) dev_err(smmu->dev, "\t0x%016llx\n", (unsigned long long)cmd[i]); @@ -890,7 +890,7 @@ static void arm_smmu_cmdq_skip_err(struct arm_smmu_device *smmu) return; } - queue_write(cmd, Q_ENT(q, idx), q->ent_dwords); + queue_write(Q_ENT(q, cons), cmd, q->ent_dwords); } static void arm_smmu_cmdq_issue_cmd(struct arm_smmu_device *smmu, -- cgit v1.3-18-gd494 From 7611da865c1060b2a7c87a15de663a59035747f8 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 18 Aug 2016 15:41:58 -0700 Subject: irqchip/gicv3-its: Disable the ITS before initializing it When starting a kexec/kdump kernel, the GIC ITS will already have been enabled. According to the ARM Generic Interrupt Controller Architecture Specification (GIC architecture Version 3.0 and version 4.0), writing to GITS_BASER or GITS_CBASER is "UNPREDICTABLE" when the ITS is enabled. On Cavium Thunder systems, this prevents the ITS from being initializing in the kexec/kdump kernel, resulting in failure to register/enable interrupts for all devices. The fix is to disable the ITS if it is not already in the disabled state. This allows the ITS to be properly initialized and then re-enabled in the kexec/kdump kernel. Acked-by: Marc Zyngier Signed-off-by: David Daney Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 7ceaba81efb4..36b9c28a5c91 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1545,7 +1545,12 @@ static int its_force_quiescent(void __iomem *base) u32 val; val = readl_relaxed(base + GITS_CTLR); - if (val & GITS_CTLR_QUIESCENT) + /* + * GIC architecture specification requires the ITS to be both + * disabled and quiescent for writes to GITS_BASER or + * GITS_CBASER to not have UNPREDICTABLE results. + */ + if ((val & GITS_CTLR_QUIESCENT) && !(val & GITS_CTLR_ENABLE)) return 0; /* Disable the generation of all interrupts to this ITS */ -- cgit v1.3-18-gd494 From 3714ce1d6655098ee69ede632883e5874d67e4ab Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 5 Aug 2016 19:49:45 +0100 Subject: iommu/arm-smmu: Disable stalling faults for all endpoints Enabling stalling faults can result in hardware deadlock on poorly designed systems, particularly those with a PCI root complex upstream of the SMMU. Although it's not really Linux's job to save hardware integrators from their own misfortune, it *is* our job to stop userspace (e.g. VFIO clients) from hosing the system for everybody else, even if they might already be required to have elevated privileges. Given that the fault handling code currently executes entirely in IRQ context, there is nothing that can sensibly be done to recover from things like page faults anyway, so let's rip this code out for now and avoid the potential for deadlock. Cc: Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Reported-by: Matt Evans Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu.c | 34 +++++++--------------------------- 1 file changed, 7 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 4f49fe29f202..2db74ebc3240 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -686,8 +686,7 @@ static struct iommu_gather_ops arm_smmu_gather_ops = { static irqreturn_t arm_smmu_context_fault(int irq, void *dev) { - int flags, ret; - u32 fsr, fsynr, resume; + u32 fsr, fsynr; unsigned long iova; struct iommu_domain *domain = dev; struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain); @@ -701,34 +700,15 @@ static irqreturn_t arm_smmu_context_fault(int irq, void *dev) if (!(fsr & FSR_FAULT)) return IRQ_NONE; - if (fsr & FSR_IGN) - dev_err_ratelimited(smmu->dev, - "Unexpected context fault (fsr 0x%x)\n", - fsr); - fsynr = readl_relaxed(cb_base + ARM_SMMU_CB_FSYNR0); - flags = fsynr & FSYNR0_WNR ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ; - iova = readq_relaxed(cb_base + ARM_SMMU_CB_FAR); - if (!report_iommu_fault(domain, smmu->dev, iova, flags)) { - ret = IRQ_HANDLED; - resume = RESUME_RETRY; - } else { - dev_err_ratelimited(smmu->dev, - "Unhandled context fault: iova=0x%08lx, fsynr=0x%x, cb=%d\n", - iova, fsynr, cfg->cbndx); - ret = IRQ_NONE; - resume = RESUME_TERMINATE; - } - - /* Clear the faulting FSR */ - writel(fsr, cb_base + ARM_SMMU_CB_FSR); - /* Retry or terminate any stalled transactions */ - if (fsr & FSR_SS) - writel_relaxed(resume, cb_base + ARM_SMMU_CB_RESUME); + dev_err_ratelimited(smmu->dev, + "Unhandled context fault: fsr=0x%x, iova=0x%08lx, fsynr=0x%x, cb=%d\n", + fsr, iova, fsynr, cfg->cbndx); - return ret; + writel(fsr, cb_base + ARM_SMMU_CB_FSR); + return IRQ_HANDLED; } static irqreturn_t arm_smmu_global_fault(int irq, void *dev) @@ -837,7 +817,7 @@ static void arm_smmu_init_context_bank(struct arm_smmu_domain *smmu_domain, } /* SCTLR */ - reg = SCTLR_CFCFG | SCTLR_CFIE | SCTLR_CFRE | SCTLR_M | SCTLR_EAE_SBOP; + reg = SCTLR_CFIE | SCTLR_CFRE | SCTLR_M | SCTLR_EAE_SBOP; if (stage1) reg |= SCTLR_S1_ASIDPNE; #ifdef __BIG_ENDIAN -- cgit v1.3-18-gd494 From 5bc0a11664e17e9f9551983f5b660bd48b57483c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 16 Aug 2016 14:29:16 +0100 Subject: iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass The disable_bypass cmdline option changes the SMMUv3 driver to put down faulting stream table entries by default, as opposed to bypassing transactions from unconfigured devices. In this mode of operation, it is entirely expected to see aborting entries in the stream table if and when we come to installing a valid translation, so don't trigger a BUG() as a result of misdiagnosing these entries as stream table corruption. Cc: Fixes: 48ec83bcbcf5 ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices") Tested-by: Robin Murphy Reported-by: Robin Murphy Reviewed-by: Robin Murphy Signed-off-by: Will Deacon --- drivers/iommu/arm-smmu-v3.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 330623f8e344..641e88761319 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1034,6 +1034,9 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid, case STRTAB_STE_0_CFG_S2_TRANS: ste_live = true; break; + case STRTAB_STE_0_CFG_ABORT: + if (disable_bypass) + break; default: BUG(); /* STE corruption */ } -- cgit v1.3-18-gd494 From 7a665d2f60b457c0d77b3e4f01e21c55ffc57069 Mon Sep 17 00:00:00 2001 From: Daniel Verkamp Date: Tue, 28 Jun 2016 11:20:23 -0700 Subject: nvme-fabrics: change NQN UUID to big-endian format NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the UUID format of NQN uses a UUID based on RFC 4122. RFC 4122 specifies that the UUID is encoded in big-endian byte order. Switch the NVMe over Fabrics host ID field from little-endian UUID to big-endian UUID to match the specification. Signed-off-by: Daniel Verkamp Reviewed-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- drivers/nvme/host/fabrics.c | 10 +++++----- drivers/nvme/host/fabrics.h | 2 +- include/linux/nvme.h | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 020302c6ea57..be0b1067c9fa 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -56,7 +56,7 @@ static struct nvmf_host *nvmf_host_add(const char *hostnqn) kref_init(&host->ref); memcpy(host->nqn, hostnqn, NVMF_NQN_SIZE); - uuid_le_gen(&host->id); + uuid_be_gen(&host->id); list_add_tail(&host->list, &nvmf_hosts); out_unlock: @@ -73,9 +73,9 @@ static struct nvmf_host *nvmf_host_default(void) return NULL; kref_init(&host->ref); - uuid_le_gen(&host->id); + uuid_be_gen(&host->id); snprintf(host->nqn, NVMF_NQN_SIZE, - "nqn.2014-08.org.nvmexpress:NVMf:uuid:%pUl", &host->id); + "nqn.2014-08.org.nvmexpress:NVMf:uuid:%pUb", &host->id); mutex_lock(&nvmf_hosts_mutex); list_add_tail(&host->list, &nvmf_hosts); @@ -382,7 +382,7 @@ int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl) if (!data) return -ENOMEM; - memcpy(&data->hostid, &ctrl->opts->host->id, sizeof(uuid_le)); + memcpy(&data->hostid, &ctrl->opts->host->id, sizeof(uuid_be)); data->cntlid = cpu_to_le16(0xffff); strncpy(data->subsysnqn, ctrl->opts->subsysnqn, NVMF_NQN_SIZE); strncpy(data->hostnqn, ctrl->opts->host->nqn, NVMF_NQN_SIZE); @@ -441,7 +441,7 @@ int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid) if (!data) return -ENOMEM; - memcpy(&data->hostid, &ctrl->opts->host->id, sizeof(uuid_le)); + memcpy(&data->hostid, &ctrl->opts->host->id, sizeof(uuid_be)); data->cntlid = cpu_to_le16(ctrl->cntlid); strncpy(data->subsysnqn, ctrl->opts->subsysnqn, NVMF_NQN_SIZE); strncpy(data->hostnqn, ctrl->opts->host->nqn, NVMF_NQN_SIZE); diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index 89df52c8be97..46e460aee52d 100644 --- a/drivers/nvme/host/fabrics.h +++ b/drivers/nvme/host/fabrics.h @@ -34,7 +34,7 @@ struct nvmf_host { struct kref ref; struct list_head list; char nqn[NVMF_NQN_SIZE]; - uuid_le id; + uuid_be id; }; /** diff --git a/include/linux/nvme.h b/include/linux/nvme.h index d8b37bab2887..7676557ce357 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -794,7 +794,7 @@ struct nvmf_connect_command { }; struct nvmf_connect_data { - uuid_le hostid; + uuid_be hostid; __le16 cntlid; char resv4[238]; char subsysnqn[NVMF_NQN_FIELD_LEN]; -- cgit v1.3-18-gd494 From 06777c4ec78a43977b63f1d5045def057227c2c5 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 7 Aug 2016 21:01:49 +0200 Subject: dmaengine: pxa_dma: fix debug message In a very tight timeframe, the debug message in the transfer completion handler can be misleading, as the completion test report can change just after the message, and the code flow cannot be deduced from the debug message. This is just a cleanup to make debugging easier. Signed-off-by: Robert Jarzmik Signed-off-by: Vinod Koul --- drivers/dma/pxa_dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index 2093e528ae00..3f56f9ca4482 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -671,6 +671,7 @@ static irqreturn_t pxad_chan_handler(int irq, void *dev_id) struct virt_dma_desc *vd, *tmp; unsigned int dcsr; unsigned long flags; + bool vd_completed; dma_cookie_t last_started = 0; BUG_ON(!chan); @@ -681,15 +682,17 @@ static irqreturn_t pxad_chan_handler(int irq, void *dev_id) spin_lock_irqsave(&chan->vc.lock, flags); list_for_each_entry_safe(vd, tmp, &chan->vc.desc_issued, node) { + vd_completed = is_desc_completed(vd); dev_dbg(&chan->vc.chan.dev->device, - "%s(): checking txd %p[%x]: completed=%d\n", - __func__, vd, vd->tx.cookie, is_desc_completed(vd)); + "%s(): checking txd %p[%x]: completed=%d dcsr=0x%x\n", + __func__, vd, vd->tx.cookie, vd_completed, + dcsr); last_started = vd->tx.cookie; if (to_pxad_sw_desc(vd)->cyclic) { vchan_cyclic_callback(vd); break; } - if (is_desc_completed(vd)) { + if (vd_completed) { list_del(&vd->node); vchan_cookie_complete(vd); } else { -- cgit v1.3-18-gd494 From 98096d8a787f05b1afe3869aa01e84981915c81d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 18 Aug 2016 11:16:35 -0700 Subject: nvme-fabrics: get a reference when reusing a nvme_host structure Without this we'll get a use after free after connecting two controller using the same hostnqn and then disconnecting one of them. Signed-off-by: Christoph Hellwig Reviewed-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- drivers/nvme/host/fabrics.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index be0b1067c9fa..4eff49174466 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -47,8 +47,10 @@ static struct nvmf_host *nvmf_host_add(const char *hostnqn) mutex_lock(&nvmf_hosts_mutex); host = __nvmf_host_find(hostnqn); - if (host) + if (host) { + kref_get(&host->ref); goto out_unlock; + } host = kmalloc(sizeof(*host), GFP_KERNEL); if (!host) -- cgit v1.3-18-gd494 From aa71987472a974f4f6dc4be377720564079ef42e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 18 Aug 2016 11:16:36 -0700 Subject: nvme: fabrics drivers don't need the nvme-pci driver So select the NVME_CORE symbol instead of depending on BLK_DEV_NVME. Signed-off-by: Christoph Hellwig Reviewed-by: Jay Freyensee Signed-off-by: Sagi Grimberg --- drivers/nvme/host/Kconfig | 2 +- drivers/nvme/target/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index db39d53cdfb9..0c644f7bdf80 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -31,7 +31,7 @@ config NVME_FABRICS config NVME_RDMA tristate "NVM Express over Fabrics RDMA host driver" depends on INFINIBAND - depends on BLK_DEV_NVME + select NVME_CORE select NVME_FABRICS select SG_POOL help diff --git a/drivers/nvme/target/Kconfig b/drivers/nvme/target/Kconfig index a5c31cbeb481..3a5b9d0576cb 100644 --- a/drivers/nvme/target/Kconfig +++ b/drivers/nvme/target/Kconfig @@ -15,8 +15,8 @@ config NVME_TARGET config NVME_TARGET_LOOP tristate "NVMe loopback device support" - depends on BLK_DEV_NVME depends on NVME_TARGET + select NVME_CORE select NVME_FABRICS select SG_POOL help -- cgit v1.3-18-gd494 From 2527ecc9195e9c66252af24c4689e8a67cd4ccb9 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 16 Aug 2016 09:58:25 +0200 Subject: gpio: Fix OF build problem on UM The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven Reported-by: kbuild test robot Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 98dd47a30fc7..24f833c3d3ba 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -50,6 +50,7 @@ config GPIO_DEVRES config OF_GPIO def_bool y depends on OF + depends on HAS_IOMEM config GPIO_ACPI def_bool y -- cgit v1.3-18-gd494 From 048c28c91e56781082bc17d181e460b81e7e8bcb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 16 Aug 2016 12:07:31 +0200 Subject: gpio: make any OF dependent driver depend on OF_GPIO The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent Cc: Pramod Gurav Cc: Andreas Larsson Cc: Gregory CLEMENT Cc: Thierry Reding Cc: Laxman Dewangan Cc: Alexandre Courbot Cc: Geert Uytterhoeven Cc: Phil Reid Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 24f833c3d3ba..66a94103798b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -189,7 +189,7 @@ config GPIO_EP93XX config GPIO_ETRAXFS bool "Axis ETRAX FS General I/O" depends on CRIS || COMPILE_TEST - depends on OF + depends on OF_GPIO select GPIO_GENERIC select GPIOLIB_IRQCHIP help @@ -215,7 +215,7 @@ config GPIO_GENERIC_PLATFORM config GPIO_GRGPIO tristate "Aeroflex Gaisler GRGPIO support" - depends on OF + depends on OF_GPIO select GPIO_GENERIC select IRQ_DOMAIN help @@ -313,7 +313,7 @@ config GPIO_MPC8XXX config GPIO_MVEBU def_bool y depends on PLAT_ORION - depends on OF + depends on OF_GPIO select GENERIC_IRQ_CHIP config GPIO_MXC @@ -406,7 +406,7 @@ config GPIO_TEGRA bool "NVIDIA Tegra GPIO support" default ARCH_TEGRA depends on ARCH_TEGRA || COMPILE_TEST - depends on OF + depends on OF_GPIO help Say yes here to support GPIO pins on NVIDIA Tegra SoCs. @@ -1100,7 +1100,7 @@ menu "SPI GPIO expanders" config GPIO_74X164 tristate "74x164 serial-in/parallel-out 8-bits shift register" - depends on OF + depends on OF_GPIO help Driver for 74x164 compatible serial-in/parallel-out 8-outputs shift registers. This driver can be used to provide access -- cgit v1.3-18-gd494 From a305a4387acb01cecadeeea5151c049a022a1bfc Mon Sep 17 00:00:00 2001 From: Brendan Jackman Date: Wed, 17 Aug 2016 16:14:59 +0100 Subject: thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power Currently all CPU cooling devices share a `struct thermal_cooling_device_ops` instance. The thermal core uses the presence of functions in this struct to determine if a cooling device has a power model (see cdev_is_power_actor). cpu_cooling.c adds the power model functions to the shared struct when a device is registered with a power model. Therefore, if a CPU cooling device is registered using [of_]cpufreq_power_cooling_register, _all_ devices will be determined to have a power model, including any registered with [of_]cpufreq_cooling_register. This can result in cpufreq_state2power being called on a device where dyn_power_table is NULL. With this commit, instead of having a shared thermal_cooling_device_ops which is mutated, we have two versions: one with the power functions and one without. Signed-off-by: Brendan Jackman Cc: Amit Daniel Kachhap Cc: Viresh Kumar Cc: Javi Merino Acked-by: Viresh Kumar Acked-by: Javi Merino Signed-off-by: Zhang Rui --- drivers/thermal/cpu_cooling.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 3788ed74c9ab..a32b41783b77 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -740,12 +740,22 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev, } /* Bind cpufreq callbacks to thermal cooling device ops */ + static struct thermal_cooling_device_ops cpufreq_cooling_ops = { .get_max_state = cpufreq_get_max_state, .get_cur_state = cpufreq_get_cur_state, .set_cur_state = cpufreq_set_cur_state, }; +static struct thermal_cooling_device_ops cpufreq_power_cooling_ops = { + .get_max_state = cpufreq_get_max_state, + .get_cur_state = cpufreq_get_cur_state, + .set_cur_state = cpufreq_set_cur_state, + .get_requested_power = cpufreq_get_requested_power, + .state2power = cpufreq_state2power, + .power2state = cpufreq_power2state, +}; + /* Notifier for cpufreq policy change */ static struct notifier_block thermal_cpufreq_notifier_block = { .notifier_call = cpufreq_thermal_notifier, @@ -795,6 +805,7 @@ __cpufreq_cooling_register(struct device_node *np, struct cpumask temp_mask; unsigned int freq, i, num_cpus; int ret; + struct thermal_cooling_device_ops *cooling_ops; cpumask_and(&temp_mask, clip_cpus, cpu_online_mask); policy = cpufreq_cpu_get(cpumask_first(&temp_mask)); @@ -850,10 +861,6 @@ __cpufreq_cooling_register(struct device_node *np, cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus); if (capacitance) { - cpufreq_cooling_ops.get_requested_power = - cpufreq_get_requested_power; - cpufreq_cooling_ops.state2power = cpufreq_state2power; - cpufreq_cooling_ops.power2state = cpufreq_power2state; cpufreq_dev->plat_get_static_power = plat_static_func; ret = build_dyn_power_table(cpufreq_dev, capacitance); @@ -861,6 +868,10 @@ __cpufreq_cooling_register(struct device_node *np, cool_dev = ERR_PTR(ret); goto free_table; } + + cooling_ops = &cpufreq_power_cooling_ops; + } else { + cooling_ops = &cpufreq_cooling_ops; } ret = get_idr(&cpufreq_idr, &cpufreq_dev->id); @@ -885,7 +896,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_dev->id); cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev, - &cpufreq_cooling_ops); + cooling_ops); if (IS_ERR(cool_dev)) goto remove_idr; -- cgit v1.3-18-gd494 From 57027db00d1094d0abd5776899b00ca55d42d37c Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Mon, 15 Aug 2016 11:22:40 +0200 Subject: Thermal-INT3406: Delete owner assignment The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring Signed-off-by: Zhang Rui --- drivers/thermal/int340x_thermal/int3406_thermal.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/int340x_thermal/int3406_thermal.c b/drivers/thermal/int340x_thermal/int3406_thermal.c index a578cd257db4..1891f34ab7fc 100644 --- a/drivers/thermal/int340x_thermal/int3406_thermal.c +++ b/drivers/thermal/int340x_thermal/int3406_thermal.c @@ -225,7 +225,6 @@ static struct platform_driver int3406_thermal_driver = { .remove = int3406_thermal_remove, .driver = { .name = "int3406 thermal", - .owner = THIS_MODULE, .acpi_match_table = int3406_thermal_match, }, }; -- cgit v1.3-18-gd494 From 829bc78aa7628e81a9de717316b85cbee3c5eb86 Mon Sep 17 00:00:00 2001 From: Corentin LABBE Date: Tue, 16 Aug 2016 10:51:38 +0200 Subject: thermal: imx: fix a possible NULL dereference of_match_device could return NULL, and so cause a NULL pointer dereference later at line 472: data->socdata = of_id->data; For fixing this problem, we use of_device_get_match_data(), this will simplify the code a little by using a standard function for getting the match data. Reported-by: coverity (CID 1324128) Signed-off-by: LABBE Corentin Signed-off-by: Zhang Rui --- drivers/thermal/imx_thermal.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index c5547bd711db..e473548b5d28 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -471,8 +471,6 @@ MODULE_DEVICE_TABLE(of, of_imx_thermal_match); static int imx_thermal_probe(struct platform_device *pdev) { - const struct of_device_id *of_id = - of_match_device(of_imx_thermal_match, &pdev->dev); struct imx_thermal_data *data; struct regmap *map; int measure_freq; @@ -490,7 +488,7 @@ static int imx_thermal_probe(struct platform_device *pdev) } data->tempmon = map; - data->socdata = of_id->data; + data->socdata = of_device_get_match_data(&pdev->dev); /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ if (data->socdata->version == TEMPMON_IMX6SX) { -- cgit v1.3-18-gd494 From 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 Mon Sep 17 00:00:00 2001 From: Christian König Date: Wed, 17 Aug 2016 09:46:42 +0200 Subject: drm/radeon: fix radeon_move_blit on 32bit systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This bug seems to be present for a very long time. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_ttm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 0c00e192c845..c2e0a1ccdfbc 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -263,8 +263,8 @@ static int radeon_move_blit(struct ttm_buffer_object *bo, rdev = radeon_get_rdev(bo->bdev); ridx = radeon_copy_ring_index(rdev); - old_start = old_mem->start << PAGE_SHIFT; - new_start = new_mem->start << PAGE_SHIFT; + old_start = (u64)old_mem->start << PAGE_SHIFT; + new_start = (u64)new_mem->start << PAGE_SHIFT; switch (old_mem->mem_type) { case TTM_PL_VRAM: -- cgit v1.3-18-gd494 From 815d27a46f3119f74fe01fe10bf683aa5bc55597 Mon Sep 17 00:00:00 2001 From: Christian König Date: Wed, 17 Aug 2016 09:45:25 +0200 Subject: drm/amdgpu: fix amdgpu_move_blit on 32bit systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This bug seems to be present for a very long time. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 9b61c8ba7aaf..141bfcabd19c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -251,8 +251,8 @@ static int amdgpu_move_blit(struct ttm_buffer_object *bo, adev = amdgpu_get_adev(bo->bdev); ring = adev->mman.buffer_funcs_ring; - old_start = old_mem->start << PAGE_SHIFT; - new_start = new_mem->start << PAGE_SHIFT; + old_start = (u64)old_mem->start << PAGE_SHIFT; + new_start = (u64)new_mem->start << PAGE_SHIFT; switch (old_mem->mem_type) { case TTM_PL_VRAM: -- cgit v1.3-18-gd494 From 847927bb3db2b18744ddec1b4fbb274ac7e05199 Mon Sep 17 00:00:00 2001 From: Christian König Date: Wed, 17 Aug 2016 14:10:37 +0200 Subject: drm/amdgpu: fix sdma_v2_4_ring_test_ib MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Typo in checking the return code. Signed-off-by: Christian König Reviewed-by: Alex Deucher Reviewed-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c index 1351c7e834a2..a64715d90503 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c @@ -714,7 +714,7 @@ static int sdma_v2_4_ring_test_ib(struct amdgpu_ring *ring, long timeout) DRM_ERROR("amdgpu: IB test timed out\n"); r = -ETIMEDOUT; goto err1; - } else if (r) { + } else if (r < 0) { DRM_ERROR("amdgpu: fence wait failed (%ld).\n", r); goto err1; } -- cgit v1.3-18-gd494 From bdf001374bfe12677ae6ec5076452493fb682012 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 16 Aug 2016 19:52:35 +0200 Subject: drm/amdgpu: fix timeout value check in amd_sched_job_recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Could be that we don't actually have a timeout set. Signed-off-by: Christian König Acked-by: Alex Deucher Reviewed-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index ef312bb75fda..963a24d46a93 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -405,7 +405,7 @@ void amd_sched_job_recovery(struct amd_gpu_scheduler *sched) spin_lock(&sched->job_list_lock); s_job = list_first_entry_or_null(&sched->ring_mirror_list, struct amd_sched_job, node); - if (s_job) + if (s_job && sched->timeout != MAX_SCHEDULE_TIMEOUT) schedule_delayed_work(&s_job->work_tdr, sched->timeout); list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) { -- cgit v1.3-18-gd494 From 6c647b0eb01cd7326dca093590f5e123e3c68b9c Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 1 Jul 2016 15:45:57 -0400 Subject: xen-blkfront: fix places not updated after introducing 64KB page granularity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Two places didn't get updated when 64KB page granularity was introduced, this patch fix them. Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index be4fea6a5dd3..6a1756d72dcb 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -1315,7 +1315,7 @@ free_shadow: rinfo->ring_ref[i] = GRANT_INVALID_REF; } } - free_pages((unsigned long)rinfo->ring.sring, get_order(info->nr_ring_pages * PAGE_SIZE)); + free_pages((unsigned long)rinfo->ring.sring, get_order(info->nr_ring_pages * XEN_PAGE_SIZE)); rinfo->ring.sring = NULL; if (rinfo->irq) @@ -2008,7 +2008,7 @@ static int blkif_recover(struct blkfront_info *info) blkfront_gather_backend_features(info); segs = info->max_indirect_segments ? : BLKIF_MAX_SEGMENTS_PER_REQUEST; - blk_queue_max_segments(info->rq, segs); + blk_queue_max_segments(info->rq, segs / GRANTS_PER_PSEG); for (r_index = 0; r_index < info->nr_rings; r_index++) { struct blkfront_ring_info *rinfo = &info->rinfo[r_index]; -- cgit v1.3-18-gd494 From 172335ada40ce26806e514c83a504b45c14a4139 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Fri, 1 Jul 2016 17:43:39 -0400 Subject: xen-blkfront: introduce blkif_set_queue_limits() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit blk_mq_update_nr_hw_queues() reset all queue limits to default which it's not as xen-blkfront expected, introducing blkif_set_queue_limits() to reset limits with initial correct values. Signed-off-by: Bob Liu Acked-by: Roger Pau Monné Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 86 ++++++++++++++++++++++++-------------------- 1 file changed, 48 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6a1756d72dcb..f84e220a26e6 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -189,6 +189,8 @@ struct blkfront_info struct mutex mutex; struct xenbus_device *xbdev; struct gendisk *gd; + u16 sector_size; + unsigned int physical_sector_size; int vdevice; blkif_vdev_t handle; enum blkif_state connected; @@ -910,9 +912,45 @@ static struct blk_mq_ops blkfront_mq_ops = { .map_queue = blk_mq_map_queue, }; +static void blkif_set_queue_limits(struct blkfront_info *info) +{ + struct request_queue *rq = info->rq; + struct gendisk *gd = info->gd; + unsigned int segments = info->max_indirect_segments ? : + BLKIF_MAX_SEGMENTS_PER_REQUEST; + + queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq); + + if (info->feature_discard) { + queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, rq); + blk_queue_max_discard_sectors(rq, get_capacity(gd)); + rq->limits.discard_granularity = info->discard_granularity; + rq->limits.discard_alignment = info->discard_alignment; + if (info->feature_secdiscard) + queue_flag_set_unlocked(QUEUE_FLAG_SECERASE, rq); + } + + /* Hard sector size and max sectors impersonate the equiv. hardware. */ + blk_queue_logical_block_size(rq, info->sector_size); + blk_queue_physical_block_size(rq, info->physical_sector_size); + blk_queue_max_hw_sectors(rq, (segments * XEN_PAGE_SIZE) / 512); + + /* Each segment in a request is up to an aligned page in size. */ + blk_queue_segment_boundary(rq, PAGE_SIZE - 1); + blk_queue_max_segment_size(rq, PAGE_SIZE); + + /* Ensure a merged request will fit in a single I/O ring slot. */ + blk_queue_max_segments(rq, segments / GRANTS_PER_PSEG); + + /* Make sure buffer addresses are sector-aligned. */ + blk_queue_dma_alignment(rq, 511); + + /* Make sure we don't use bounce buffers. */ + blk_queue_bounce_limit(rq, BLK_BOUNCE_ANY); +} + static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size, - unsigned int physical_sector_size, - unsigned int segments) + unsigned int physical_sector_size) { struct request_queue *rq; struct blkfront_info *info = gd->private_data; @@ -944,36 +982,11 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size, } rq->queuedata = info; - queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq); - - if (info->feature_discard) { - queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, rq); - blk_queue_max_discard_sectors(rq, get_capacity(gd)); - rq->limits.discard_granularity = info->discard_granularity; - rq->limits.discard_alignment = info->discard_alignment; - if (info->feature_secdiscard) - queue_flag_set_unlocked(QUEUE_FLAG_SECERASE, rq); - } - - /* Hard sector size and max sectors impersonate the equiv. hardware. */ - blk_queue_logical_block_size(rq, sector_size); - blk_queue_physical_block_size(rq, physical_sector_size); - blk_queue_max_hw_sectors(rq, (segments * XEN_PAGE_SIZE) / 512); - - /* Each segment in a request is up to an aligned page in size. */ - blk_queue_segment_boundary(rq, PAGE_SIZE - 1); - blk_queue_max_segment_size(rq, PAGE_SIZE); - - /* Ensure a merged request will fit in a single I/O ring slot. */ - blk_queue_max_segments(rq, segments / GRANTS_PER_PSEG); - - /* Make sure buffer addresses are sector-aligned. */ - blk_queue_dma_alignment(rq, 511); - - /* Make sure we don't use bounce buffers. */ - blk_queue_bounce_limit(rq, BLK_BOUNCE_ANY); - - gd->queue = rq; + info->rq = gd->queue = rq; + info->gd = gd; + info->sector_size = sector_size; + info->physical_sector_size = physical_sector_size; + blkif_set_queue_limits(info); return 0; } @@ -1136,16 +1149,11 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity, gd->private_data = info; set_capacity(gd, capacity); - if (xlvbd_init_blk_queue(gd, sector_size, physical_sector_size, - info->max_indirect_segments ? : - BLKIF_MAX_SEGMENTS_PER_REQUEST)) { + if (xlvbd_init_blk_queue(gd, sector_size, physical_sector_size)) { del_gendisk(gd); goto release; } - info->rq = gd->queue; - info->gd = gd; - xlvbd_flush(info); if (vdisk_info & VDISK_READONLY) @@ -2007,6 +2015,8 @@ static int blkif_recover(struct blkfront_info *info) struct split_bio *split_bio; blkfront_gather_backend_features(info); + /* Reset limits changed by blk_mq_update_nr_hw_queues(). */ + blkif_set_queue_limits(info); segs = info->max_indirect_segments ? : BLKIF_MAX_SEGMENTS_PER_REQUEST; blk_queue_max_segments(info->rq, segs / GRANTS_PER_PSEG); -- cgit v1.3-18-gd494 From 4e876c2bd37fbb5c37a4554a79cf979d486f0e82 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Wed, 27 Jul 2016 17:42:04 +0800 Subject: xen-blkfront: free resources if xlvbd_alloc_gendisk fails Current code forgets to free resources in the failure path of xlvbd_alloc_gendisk(), this patch fix it. Signed-off-by: Bob Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/block/xen-blkfront.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index f84e220a26e6..88ef6d4729b4 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -2442,7 +2442,7 @@ static void blkfront_connect(struct blkfront_info *info) if (err) { xenbus_dev_fatal(info->xbdev, err, "xlvbd_add at %s", info->xbdev->otherend); - return; + goto fail; } xenbus_switch_state(info->xbdev, XenbusStateConnected); @@ -2455,6 +2455,11 @@ static void blkfront_connect(struct blkfront_info *info) device_add_disk(&info->xbdev->dev, info->gd); info->is_ready = 1; + return; + +fail: + blkif_free(info, 0); + return; } /** -- cgit v1.3-18-gd494 From 47af45d684b5f3ae000ad448db02ce4f13f73273 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 16 Aug 2016 17:38:54 -0700 Subject: Input: i8042 - set up shared ps2_cmd_mutex for AUX ports The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III Tested-by: Bruno Wolff III Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index b4d34086e73f..405252a884dd 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1305,6 +1305,7 @@ static int __init i8042_create_aux_port(int idx) serio->write = i8042_aux_write; serio->start = i8042_start; serio->stop = i8042_stop; + serio->ps2_cmd_mutex = &i8042_mutex; serio->port_data = port; serio->dev.parent = &i8042_platform_device->dev; if (idx < 0) { -- cgit v1.3-18-gd494 From 13f9bba7cd4f1665e4091143950a54e3f2984b07 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Thu, 18 Aug 2016 21:09:02 +0300 Subject: net/mlx5e: Set port MTU on netdev creation rather on open Port mtu shouldn't be written to hardware on every single interface open. Here we set it only when needed, on change_mtu and netdevice creation. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 870bea37c57c..0fc3a2b16a18 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1826,10 +1826,6 @@ int mlx5e_open_locked(struct net_device *netdev) netif_set_real_num_tx_queues(netdev, num_txqs); netif_set_real_num_rx_queues(netdev, priv->params.num_channels); - err = mlx5e_set_dev_port_mtu(netdev); - if (err) - goto err_clear_state_opened_flag; - err = mlx5e_open_channels(priv); if (err) { netdev_err(netdev, "%s: mlx5e_open_channels failed, %d\n", @@ -2593,6 +2589,7 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) mlx5e_close_locked(netdev); netdev->mtu = new_mtu; + mlx5e_set_dev_port_mtu(netdev); if (was_opened) err = mlx5e_open_locked(netdev); @@ -3463,6 +3460,8 @@ void *mlx5e_create_netdev(struct mlx5_core_dev *mdev, mlx5e_init_l2_addr(priv); + mlx5e_set_dev_port_mtu(netdev); + err = register_netdev(netdev); if (err) { mlx5_core_err(mdev, "register_netdev failed, %d\n", err); -- cgit v1.3-18-gd494 From 506753b0b40997756d73f841c884a018f52401a0 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 18 Aug 2016 21:09:03 +0300 Subject: net/mlx5e: Optimization for MTU change Avoid unnecessary interface down/up operations upon an MTU change when it does not affect the rings configuration. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 0fc3a2b16a18..65258b259579 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -2569,6 +2569,7 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) u16 max_mtu; u16 min_mtu; int err = 0; + bool reset; mlx5_query_port_max_mtu(mdev, &max_mtu, 1); @@ -2584,14 +2585,18 @@ static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu) mutex_lock(&priv->state_lock); + reset = !priv->params.lro_en && + (priv->params.rq_wq_type != + MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ); + was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state); - if (was_opened) + if (was_opened && reset) mlx5e_close_locked(netdev); netdev->mtu = new_mtu; mlx5e_set_dev_port_mtu(netdev); - if (was_opened) + if (was_opened && reset) err = mlx5e_open_locked(netdev); mutex_unlock(&priv->state_lock); -- cgit v1.3-18-gd494 From 1061c90f524963a0a90e7d2f9a6bfa666458af51 Mon Sep 17 00:00:00 2001 From: Mohamad Haj Yahia Date: Thu, 18 Aug 2016 21:09:04 +0300 Subject: net/mlx5: Fix pci error recovery flow When PCI error is detected we should save the state of the pci prior to disabling it. Also when receiving pci slot reset call we need to verify that the device is responsive. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 59 +++++++++++++------------- 1 file changed, 29 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 4f491d43e77d..2385bae92672 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1420,36 +1420,12 @@ static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev, dev_info(&pdev->dev, "%s was called\n", __func__); mlx5_enter_error_state(dev); mlx5_unload_one(dev, priv); + pci_save_state(pdev); mlx5_pci_disable_device(dev); return state == pci_channel_io_perm_failure ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET; } -static pci_ers_result_t mlx5_pci_slot_reset(struct pci_dev *pdev) -{ - struct mlx5_core_dev *dev = pci_get_drvdata(pdev); - int err = 0; - - dev_info(&pdev->dev, "%s was called\n", __func__); - - err = mlx5_pci_enable_device(dev); - if (err) { - dev_err(&pdev->dev, "%s: mlx5_pci_enable_device failed with error code: %d\n" - , __func__, err); - return PCI_ERS_RESULT_DISCONNECT; - } - pci_set_master(pdev); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - return err ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED; -} - -void mlx5_disable_device(struct mlx5_core_dev *dev) -{ - mlx5_pci_err_detected(dev->pdev, 0); -} - /* wait for the device to show vital signs by waiting * for the health counter to start counting. */ @@ -1477,21 +1453,44 @@ static int wait_vital(struct pci_dev *pdev) return -ETIMEDOUT; } -static void mlx5_pci_resume(struct pci_dev *pdev) +static pci_ers_result_t mlx5_pci_slot_reset(struct pci_dev *pdev) { struct mlx5_core_dev *dev = pci_get_drvdata(pdev); - struct mlx5_priv *priv = &dev->priv; int err; dev_info(&pdev->dev, "%s was called\n", __func__); - pci_save_state(pdev); - err = wait_vital(pdev); + err = mlx5_pci_enable_device(dev); if (err) { + dev_err(&pdev->dev, "%s: mlx5_pci_enable_device failed with error code: %d\n" + , __func__, err); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_set_master(pdev); + pci_restore_state(pdev); + + if (wait_vital(pdev)) { dev_err(&pdev->dev, "%s: wait_vital timed out\n", __func__); - return; + return PCI_ERS_RESULT_DISCONNECT; } + return PCI_ERS_RESULT_RECOVERED; +} + +void mlx5_disable_device(struct mlx5_core_dev *dev) +{ + mlx5_pci_err_detected(dev->pdev, 0); +} + +static void mlx5_pci_resume(struct pci_dev *pdev) +{ + struct mlx5_core_dev *dev = pci_get_drvdata(pdev); + struct mlx5_priv *priv = &dev->priv; + int err; + + dev_info(&pdev->dev, "%s was called\n", __func__); + err = mlx5_load_one(dev, priv); if (err) dev_err(&pdev->dev, "%s: mlx5_load_one failed with error code: %d\n" -- cgit v1.3-18-gd494 From 2c0f8ce1b584a4d7b8ff53140d21dfed99834940 Mon Sep 17 00:00:00 2001 From: Paul Blakey Date: Thu, 18 Aug 2016 21:09:05 +0300 Subject: net/mlx5: Added missing check of msg length in verifying its signature Set and verify signature calculates the signature for each of the mailbox nodes, even for those that are unused (from cache). Added a missing length check to set and verify only those which are used. While here, also moved the setting of msg's nodes token to where we already go over them. This saves a pass because checksum is disabled, and the only useful thing remaining that set signature does is setting the token. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 85 +++++++++++++++++---------- 1 file changed, 54 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index d6e2a1cae19a..c2ec01a22d55 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -143,13 +143,14 @@ static struct mlx5_cmd_layout *get_inst(struct mlx5_cmd *cmd, int idx) return cmd->cmd_buf + (idx << cmd->log_stride); } -static u8 xor8_buf(void *buf, int len) +static u8 xor8_buf(void *buf, size_t offset, int len) { u8 *ptr = buf; u8 sum = 0; int i; + int end = len + offset; - for (i = 0; i < len; i++) + for (i = offset; i < end; i++) sum ^= ptr[i]; return sum; @@ -157,41 +158,49 @@ static u8 xor8_buf(void *buf, int len) static int verify_block_sig(struct mlx5_cmd_prot_block *block) { - if (xor8_buf(block->rsvd0, sizeof(*block) - sizeof(block->data) - 1) != 0xff) + size_t rsvd0_off = offsetof(struct mlx5_cmd_prot_block, rsvd0); + int xor_len = sizeof(*block) - sizeof(block->data) - 1; + + if (xor8_buf(block, rsvd0_off, xor_len) != 0xff) return -EINVAL; - if (xor8_buf(block, sizeof(*block)) != 0xff) + if (xor8_buf(block, 0, sizeof(*block)) != 0xff) return -EINVAL; return 0; } -static void calc_block_sig(struct mlx5_cmd_prot_block *block, u8 token, - int csum) +static void calc_block_sig(struct mlx5_cmd_prot_block *block) { - block->token = token; - if (csum) { - block->ctrl_sig = ~xor8_buf(block->rsvd0, sizeof(*block) - - sizeof(block->data) - 2); - block->sig = ~xor8_buf(block, sizeof(*block) - 1); - } + int ctrl_xor_len = sizeof(*block) - sizeof(block->data) - 2; + size_t rsvd0_off = offsetof(struct mlx5_cmd_prot_block, rsvd0); + + block->ctrl_sig = ~xor8_buf(block, rsvd0_off, ctrl_xor_len); + block->sig = ~xor8_buf(block, 0, sizeof(*block) - 1); } -static void calc_chain_sig(struct mlx5_cmd_msg *msg, u8 token, int csum) +static void calc_chain_sig(struct mlx5_cmd_msg *msg) { struct mlx5_cmd_mailbox *next = msg->next; - - while (next) { - calc_block_sig(next->buf, token, csum); + int size = msg->len; + int blen = size - min_t(int, sizeof(msg->first.data), size); + int n = (blen + MLX5_CMD_DATA_BLOCK_SIZE - 1) + / MLX5_CMD_DATA_BLOCK_SIZE; + int i = 0; + + for (i = 0; i < n && next; i++) { + calc_block_sig(next->buf); next = next->next; } } static void set_signature(struct mlx5_cmd_work_ent *ent, int csum) { - ent->lay->sig = ~xor8_buf(ent->lay, sizeof(*ent->lay)); - calc_chain_sig(ent->in, ent->token, csum); - calc_chain_sig(ent->out, ent->token, csum); + ent->lay->sig = ~xor8_buf(ent->lay, 0, sizeof(*ent->lay)); + if (csum) { + calc_chain_sig(ent->in); + calc_chain_sig(ent->out); + } } static void poll_timeout(struct mlx5_cmd_work_ent *ent) @@ -222,12 +231,17 @@ static int verify_signature(struct mlx5_cmd_work_ent *ent) struct mlx5_cmd_mailbox *next = ent->out->next; int err; u8 sig; + int size = ent->out->len; + int blen = size - min_t(int, sizeof(ent->out->first.data), size); + int n = (blen + MLX5_CMD_DATA_BLOCK_SIZE - 1) + / MLX5_CMD_DATA_BLOCK_SIZE; + int i = 0; - sig = xor8_buf(ent->lay, sizeof(*ent->lay)); + sig = xor8_buf(ent->lay, 0, sizeof(*ent->lay)); if (sig != 0xff) return -EINVAL; - while (next) { + for (i = 0; i < n && next; i++) { err = verify_block_sig(next->buf); if (err) return err; @@ -656,7 +670,6 @@ static void cmd_work_handler(struct work_struct *work) spin_unlock_irqrestore(&cmd->alloc_lock, flags); } - ent->token = alloc_token(cmd); cmd->ent_arr[ent->idx] = ent; lay = get_inst(cmd, ent->idx); ent->lay = lay; @@ -766,7 +779,8 @@ static u8 *get_status_ptr(struct mlx5_outbox_hdr *out) static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in, struct mlx5_cmd_msg *out, void *uout, int uout_size, mlx5_cmd_cbk_t callback, - void *context, int page_queue, u8 *status) + void *context, int page_queue, u8 *status, + u8 token) { struct mlx5_cmd *cmd = &dev->cmd; struct mlx5_cmd_work_ent *ent; @@ -783,6 +797,8 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in, if (IS_ERR(ent)) return PTR_ERR(ent); + ent->token = token; + if (!callback) init_completion(&ent->done); @@ -854,7 +870,8 @@ static const struct file_operations fops = { .write = dbg_write, }; -static int mlx5_copy_to_msg(struct mlx5_cmd_msg *to, void *from, int size) +static int mlx5_copy_to_msg(struct mlx5_cmd_msg *to, void *from, int size, + u8 token) { struct mlx5_cmd_prot_block *block; struct mlx5_cmd_mailbox *next; @@ -880,6 +897,7 @@ static int mlx5_copy_to_msg(struct mlx5_cmd_msg *to, void *from, int size) memcpy(block->data, from, copy); from += copy; size -= copy; + block->token = token; next = next->next; } @@ -949,7 +967,8 @@ static void free_cmd_box(struct mlx5_core_dev *dev, } static struct mlx5_cmd_msg *mlx5_alloc_cmd_msg(struct mlx5_core_dev *dev, - gfp_t flags, int size) + gfp_t flags, int size, + u8 token) { struct mlx5_cmd_mailbox *tmp, *head = NULL; struct mlx5_cmd_prot_block *block; @@ -978,6 +997,7 @@ static struct mlx5_cmd_msg *mlx5_alloc_cmd_msg(struct mlx5_core_dev *dev, tmp->next = head; block->next = cpu_to_be64(tmp->next ? tmp->next->dma : 0); block->block_num = cpu_to_be32(n - i - 1); + block->token = token; head = tmp; } msg->next = head; @@ -1352,7 +1372,7 @@ static struct mlx5_cmd_msg *alloc_msg(struct mlx5_core_dev *dev, int in_size, } if (IS_ERR(msg)) - msg = mlx5_alloc_cmd_msg(dev, gfp, in_size); + msg = mlx5_alloc_cmd_msg(dev, gfp, in_size, 0); return msg; } @@ -1377,6 +1397,7 @@ static int cmd_exec(struct mlx5_core_dev *dev, void *in, int in_size, void *out, int err; u8 status = 0; u32 drv_synd; + u8 token; if (pci_channel_offline(dev->pdev) || dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { @@ -1395,20 +1416,22 @@ static int cmd_exec(struct mlx5_core_dev *dev, void *in, int in_size, void *out, return err; } - err = mlx5_copy_to_msg(inb, in, in_size); + token = alloc_token(&dev->cmd); + + err = mlx5_copy_to_msg(inb, in, in_size, token); if (err) { mlx5_core_warn(dev, "err %d\n", err); goto out_in; } - outb = mlx5_alloc_cmd_msg(dev, gfp, out_size); + outb = mlx5_alloc_cmd_msg(dev, gfp, out_size, token); if (IS_ERR(outb)) { err = PTR_ERR(outb); goto out_in; } err = mlx5_cmd_invoke(dev, inb, outb, out, out_size, callback, context, - pages_queue, &status); + pages_queue, &status, token); if (err) goto out_out; @@ -1476,7 +1499,7 @@ static int create_msg_cache(struct mlx5_core_dev *dev) INIT_LIST_HEAD(&cmd->cache.med.head); for (i = 0; i < NUM_LONG_LISTS; i++) { - msg = mlx5_alloc_cmd_msg(dev, GFP_KERNEL, LONG_LIST_SIZE); + msg = mlx5_alloc_cmd_msg(dev, GFP_KERNEL, LONG_LIST_SIZE, 0); if (IS_ERR(msg)) { err = PTR_ERR(msg); goto ex_err; @@ -1486,7 +1509,7 @@ static int create_msg_cache(struct mlx5_core_dev *dev) } for (i = 0; i < NUM_MED_LISTS; i++) { - msg = mlx5_alloc_cmd_msg(dev, GFP_KERNEL, MED_LIST_SIZE); + msg = mlx5_alloc_cmd_msg(dev, GFP_KERNEL, MED_LIST_SIZE, 0); if (IS_ERR(msg)) { err = PTR_ERR(msg); goto ex_err; -- cgit v1.3-18-gd494 From 6c3b4f90861c7ed59d0287b0ff7f2623f9d93d73 Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Thu, 18 Aug 2016 21:09:06 +0300 Subject: net/mlx5: Update last-use statistics for flow rules Set lastuse statistic, when number of packets is changed compared to last query. This was wrongly dropped when bulk counter reading was added. Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Amir Vadai Reported-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c index c2877e9de8a1..3a9195b4169d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c @@ -126,12 +126,21 @@ static struct rb_node *mlx5_fc_stats_query(struct mlx5_core_dev *dev, for (node = &first->node; node; node = rb_next(node)) { struct mlx5_fc *counter = rb_entry(node, struct mlx5_fc, node); struct mlx5_fc_cache *c = &counter->cache; + u64 packets; + u64 bytes; if (counter->id > last_id) break; mlx5_cmd_fc_bulk_get(dev, b, - counter->id, &c->packets, &c->bytes); + counter->id, &packets, &bytes); + + if (c->packets == packets) + continue; + + c->packets = packets; + c->bytes = bytes; + c->lastuse = jiffies; } out: -- cgit v1.3-18-gd494 From 1dbd0d373ac338903d27fab5204b13122cc5accd Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 18 Aug 2016 21:09:07 +0300 Subject: net/mlx5e: Use correct flow dissector key on flower offloading The wrong key is used when extracting the address type field set by the flower offload code. We have to use the control key and not the basic key, fix that. Fixes: e3a2b7ed018e ('net/mlx5e: Support offload cls_flower with drop action') Signed-off-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index dc8b1cb0fdc8..22cfc4ac1837 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -170,7 +170,7 @@ static int parse_cls_flower(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec if (dissector_uses_key(f->dissector, FLOW_DISSECTOR_KEY_CONTROL)) { struct flow_dissector_key_control *key = skb_flow_dissector_target(f->dissector, - FLOW_DISSECTOR_KEY_BASIC, + FLOW_DISSECTOR_KEY_CONTROL, f->key); addr_type = key->addr_type; } -- cgit v1.3-18-gd494 From dbe413e3bb93e0634f6d8d00b01cda6f141e0acd Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Thu, 18 Aug 2016 21:09:08 +0300 Subject: net/mlx5e: Retrieve the switchdev id from the firmware only once Avoid firmware command execution each time the switchdev HW ID attr get call is made. We do that by reading the ID (PF NIC MAC) only once at load time and store it on the representor structure. Signed-off-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++++ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 5 ++--- drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 1 + 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 65258b259579..03d944c0077e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3387,6 +3387,7 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv) queue_work(priv->wq, &priv->set_rx_mode_work); if (MLX5_CAP_GEN(mdev, vport_group_manager)) { + mlx5_query_nic_vport_mac_address(mdev, 0, rep.hw_id); rep.load = mlx5e_nic_rep_load; rep.unload = mlx5e_nic_rep_unload; rep.vport = 0; @@ -3505,16 +3506,20 @@ static void mlx5e_register_vport_rep(struct mlx5_core_dev *mdev) struct mlx5_eswitch *esw = mdev->priv.eswitch; int total_vfs = MLX5_TOTAL_VPORTS(mdev); int vport; + u8 mac[ETH_ALEN]; if (!MLX5_CAP_GEN(mdev, vport_group_manager)) return; + mlx5_query_nic_vport_mac_address(mdev, 0, mac); + for (vport = 1; vport < total_vfs; vport++) { struct mlx5_eswitch_rep rep; rep.load = mlx5e_vport_rep_load; rep.unload = mlx5e_vport_rep_unload; rep.vport = vport; + ether_addr_copy(rep.hw_id, mac); mlx5_eswitch_register_vport_rep(esw, &rep); } } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 1c7d8b8314bf..134de4a11f1d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -135,17 +135,16 @@ static const struct ethtool_ops mlx5e_rep_ethtool_ops = { int mlx5e_attr_get(struct net_device *dev, struct switchdev_attr *attr) { struct mlx5e_priv *priv = netdev_priv(dev); + struct mlx5_eswitch_rep *rep = priv->ppriv; struct mlx5_eswitch *esw = priv->mdev->priv.eswitch; - u8 mac[ETH_ALEN]; if (esw->mode == SRIOV_NONE) return -EOPNOTSUPP; switch (attr->id) { case SWITCHDEV_ATTR_ID_PORT_PARENT_ID: - mlx5_query_nic_vport_mac_address(priv->mdev, 0, mac); attr->u.ppid.id_len = ETH_ALEN; - memcpy(&attr->u.ppid.id, &mac, ETH_ALEN); + ether_addr_copy(attr->u.ppid.id, rep->hw_id); break; default: return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index c0b05603fc31..a96140971d77 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -174,6 +174,7 @@ struct mlx5_eswitch_rep { void *priv_data; struct list_head vport_sqs_list; bool valid; + u8 hw_id[ETH_ALEN]; }; struct mlx5_esw_offload { -- cgit v1.3-18-gd494 From ef78618b9d29d40c95ca7092493545b8487e226c Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 18 Aug 2016 21:09:09 +0300 Subject: net/mlx5: E-Switch, Return the correct devlink e-switch mode Since mlx5 has also the NONE e-switch mode, we must translate from mlx5 mode to devlink mode on the devlink eswitch mode get call, do that. While here, remove the mlx5_ prefix from the static function helpers that deal with the mode to comply with the rest of the code. Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode change') Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 24 +++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index a357e8eeeed8..1a3ccbf2dffd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -535,7 +535,7 @@ void esw_offloads_cleanup(struct mlx5_eswitch *esw, int nvports) esw_destroy_offloads_fdb_table(esw); } -static int mlx5_esw_mode_from_devlink(u16 mode, u16 *mlx5_mode) +static int esw_mode_from_devlink(u16 mode, u16 *mlx5_mode) { switch (mode) { case DEVLINK_ESWITCH_MODE_LEGACY: @@ -551,6 +551,22 @@ static int mlx5_esw_mode_from_devlink(u16 mode, u16 *mlx5_mode) return 0; } +static int esw_mode_to_devlink(u16 mlx5_mode, u16 *mode) +{ + switch (mlx5_mode) { + case SRIOV_LEGACY: + *mode = DEVLINK_ESWITCH_MODE_LEGACY; + break; + case SRIOV_OFFLOADS: + *mode = DEVLINK_ESWITCH_MODE_SWITCHDEV; + break; + default: + return -EINVAL; + } + + return 0; +} + int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode) { struct mlx5_core_dev *dev; @@ -566,7 +582,7 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode) if (cur_mlx5_mode == SRIOV_NONE) return -EOPNOTSUPP; - if (mlx5_esw_mode_from_devlink(mode, &mlx5_mode)) + if (esw_mode_from_devlink(mode, &mlx5_mode)) return -EINVAL; if (cur_mlx5_mode == mlx5_mode) @@ -592,9 +608,7 @@ int mlx5_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode) if (dev->priv.eswitch->mode == SRIOV_NONE) return -EOPNOTSUPP; - *mode = dev->priv.eswitch->mode; - - return 0; + return esw_mode_to_devlink(dev->priv.eswitch->mode, mode); } void mlx5_eswitch_register_vport_rep(struct mlx5_eswitch *esw, -- cgit v1.3-18-gd494 From 1a8ee6f25b10da7e3de0899a184b221d793f2482 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 18 Aug 2016 21:09:10 +0300 Subject: net/mlx5: E-Switch, Set the send-to-vport rules in the correct table While adding actual offloading support to the new switchdev mode, we didn't change the setup of the send-to-vport rules to put them in the slow path table, fix that. Fixes: 1033665e63b6 ('net/mlx5: E-Switch, Use two priorities for SRIOV offloads mode') Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 1a3ccbf2dffd..3dc83a9459a4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -113,7 +113,7 @@ mlx5_eswitch_add_send_to_vport_rule(struct mlx5_eswitch *esw, int vport, u32 sqn dest.type = MLX5_FLOW_DESTINATION_TYPE_VPORT; dest.vport_num = vport; - flow_rule = mlx5_add_flow_rule(esw->fdb_table.fdb, spec, + flow_rule = mlx5_add_flow_rule(esw->fdb_table.offloads.fdb, spec, MLX5_FLOW_CONTEXT_ACTION_FWD_DEST, 0, &dest); if (IS_ERR(flow_rule)) -- cgit v1.3-18-gd494 From f96750f8d6bd64bb6f5a7a1146121b96bc6115f0 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 18 Aug 2016 21:09:11 +0300 Subject: net/mlx5: E-Switch, Avoid ACLs in the offloads mode When we are in the switchdev/offloads mode, HW matching is done as dictated by the offloaded rules and hence we don't need to enable the ACLs mechanism used by the legacy mode. Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index f6d667797ee1..8b78f156214e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1451,7 +1451,8 @@ static void esw_enable_vport(struct mlx5_eswitch *esw, int vport_num, esw_debug(esw->dev, "Enabling VPORT(%d)\n", vport_num); - if (vport_num) { /* Only VFs need ACLs for VST and spoofchk filtering */ + /* Only VFs need ACLs for VST and spoofchk filtering */ + if (vport_num && esw->mode == SRIOV_LEGACY) { esw_vport_ingress_config(esw, vport); esw_vport_egress_config(esw, vport); } @@ -1502,7 +1503,7 @@ static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num) */ esw_vport_change_handle_locked(vport); vport->enabled_events = 0; - if (vport_num) { + if (vport_num && esw->mode == SRIOV_LEGACY) { esw_vport_disable_egress_acl(esw, vport); esw_vport_disable_ingress_acl(esw, vport); } @@ -1767,7 +1768,7 @@ int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw, vport, err); mutex_lock(&esw->state_lock); - if (evport->enabled) + if (evport->enabled && esw->mode == SRIOV_LEGACY) err = esw_vport_ingress_config(esw, evport); mutex_unlock(&esw->state_lock); return err; @@ -1839,7 +1840,7 @@ int mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw, mutex_lock(&esw->state_lock); evport->vlan = vlan; evport->qos = qos; - if (evport->enabled) { + if (evport->enabled && esw->mode == SRIOV_LEGACY) { err = esw_vport_ingress_config(esw, evport); if (err) goto out; @@ -1868,10 +1869,11 @@ int mlx5_eswitch_set_vport_spoofchk(struct mlx5_eswitch *esw, mutex_lock(&esw->state_lock); pschk = evport->spoofchk; evport->spoofchk = spoofchk; - if (evport->enabled) + if (evport->enabled && esw->mode == SRIOV_LEGACY) { err = esw_vport_ingress_config(esw, evport); - if (err) - evport->spoofchk = pschk; + if (err) + evport->spoofchk = pschk; + } mutex_unlock(&esw->state_lock); return err; -- cgit v1.3-18-gd494 From 8912862f067276b480c4fed9da74c9c5601130a6 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Fri, 19 Aug 2016 14:43:48 +0200 Subject: mlxsw: spectrum_buffers: Fix pool value handling in mlxsw_sp_sb_tc_pool_bind_set Pool index has to be converted by get_pool helper to work correctly for egress pool. In mlxsw the egress pool index starts from 0. Fixes: 0f433fa0ecc ("mlxsw: spectrum_buffers: Implement shared buffer configuration") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c index 237418a0e6e0..953b214f38d0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c @@ -717,22 +717,18 @@ int mlxsw_sp_sb_tc_pool_bind_set(struct mlxsw_core_port *mlxsw_core_port, u8 local_port = mlxsw_sp_port->local_port; u8 pg_buff = tc_index; enum mlxsw_reg_sbxx_dir dir = pool_type; - u8 pool = pool_index; + u8 pool = pool_get(pool_index); u32 max_buff; int err; + if (dir != dir_get(pool_index)) + return -EINVAL; + err = mlxsw_sp_sb_threshold_in(mlxsw_sp, pool, dir, threshold, &max_buff); if (err) return err; - if (pool_type == DEVLINK_SB_POOL_TYPE_EGRESS) { - if (pool < MLXSW_SP_SB_POOL_COUNT) - return -EINVAL; - pool -= MLXSW_SP_SB_POOL_COUNT; - } else if (pool >= MLXSW_SP_SB_POOL_COUNT) { - return -EINVAL; - } return mlxsw_sp_sb_cm_write(mlxsw_sp, local_port, pg_buff, dir, 0, max_buff, pool); } -- cgit v1.3-18-gd494 From d5fb46e0e3b7e49ee83ba92efc3ab4e1a545ecc1 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 Jul 2016 13:47:10 -0700 Subject: drm/vc4: Use drm_free_large() on handles to match its allocation. If you managed to exceed the limit to switch to vmalloc, we'd use the wrong free. Signed-off-by: Eric Anholt Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Cc: stable@vger.kernel.org --- drivers/gpu/drm/vc4/vc4_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index 6155e8aca1c6..62df61f9ac24 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -572,7 +572,7 @@ vc4_cl_lookup_bos(struct drm_device *dev, spin_unlock(&file_priv->table_lock); fail: - kfree(handles); + drm_free_large(handles); return 0; } -- cgit v1.3-18-gd494 From ece7267dccf0e9e08cb6e8dc6b7ad2be9c4eb444 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 19 Jul 2016 11:32:44 -0700 Subject: drm/vc4: Use drm_malloc_ab to fix large rendering jobs. If you exceeded the size that kmalloc would return, you'd get a dmesg warning and a return from the job submit. We can handle much allocations with vmalloc, and drm_malloc_ab makes that decision. Fixes failure in piglit's scissor-many. Signed-off-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_gem.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index 62df61f9ac24..bfd1b5280ff3 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -534,8 +534,8 @@ vc4_cl_lookup_bos(struct drm_device *dev, return -EINVAL; } - exec->bo = kcalloc(exec->bo_count, sizeof(struct drm_gem_cma_object *), - GFP_KERNEL); + exec->bo = drm_calloc_large(exec->bo_count, + sizeof(struct drm_gem_cma_object *)); if (!exec->bo) { DRM_ERROR("Failed to allocate validated BO pointers\n"); return -ENOMEM; @@ -608,7 +608,7 @@ vc4_get_bcl(struct drm_device *dev, struct vc4_exec_info *exec) * read the contents back for validation, and I think the * bo->vaddr is uncached access. */ - temp = kmalloc(temp_size, GFP_KERNEL); + temp = drm_malloc_ab(temp_size, 1); if (!temp) { DRM_ERROR("Failed to allocate storage for copying " "in bin/render CLs.\n"); @@ -675,7 +675,7 @@ vc4_get_bcl(struct drm_device *dev, struct vc4_exec_info *exec) ret = vc4_validate_shader_recs(dev, exec); fail: - kfree(temp); + drm_free_large(temp); return ret; } @@ -688,7 +688,7 @@ vc4_complete_exec(struct drm_device *dev, struct vc4_exec_info *exec) if (exec->bo) { for (i = 0; i < exec->bo_count; i++) drm_gem_object_unreference_unlocked(&exec->bo[i]->base); - kfree(exec->bo); + drm_free_large(exec->bo); } while (!list_empty(&exec->unref_list)) { -- cgit v1.3-18-gd494 From 163195fc12cae0c8b5c0d74d3ba8d2c5f81773bc Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 Jul 2016 13:47:12 -0700 Subject: drm/vc4: Fix handling of a pm_runtime_get_sync() success case. If the device was already up, a 1 is returned instead of 0. We were erroring out, leading the 3D driver to sometimes fail at screen initialization (generally with ENOENT returned to it). Signed-off-by: Eric Anholt Fixes: af713795c59f ("drm/vc4: Add a getparam ioctl for getting the V3D identity regs.") --- drivers/gpu/drm/vc4/vc4_drv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c index 8b42d31a7f0e..9ecef9385491 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.c +++ b/drivers/gpu/drm/vc4/vc4_drv.c @@ -57,21 +57,21 @@ static int vc4_get_param_ioctl(struct drm_device *dev, void *data, switch (args->param) { case DRM_VC4_PARAM_V3D_IDENT0: ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); - if (ret) + if (ret < 0) return ret; args->value = V3D_READ(V3D_IDENT0); pm_runtime_put(&vc4->v3d->pdev->dev); break; case DRM_VC4_PARAM_V3D_IDENT1: ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); - if (ret) + if (ret < 0) return ret; args->value = V3D_READ(V3D_IDENT1); pm_runtime_put(&vc4->v3d->pdev->dev); break; case DRM_VC4_PARAM_V3D_IDENT2: ret = pm_runtime_get_sync(&vc4->v3d->pdev->dev); - if (ret) + if (ret < 0) return ret; args->value = V3D_READ(V3D_IDENT2); pm_runtime_put(&vc4->v3d->pdev->dev); -- cgit v1.3-18-gd494 From def96527707e1978a0c88e75d13b082f51460d5c Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 Jul 2016 13:47:13 -0700 Subject: drm/vc4: Free hang state before destroying BO cache. The BO cache will complain if BOs are still allocated when we try to destroy it (since freeing those BOs would try to hit the cache). You could hit this if you were to unload the module after a GPU hang. Signed-off-by: Eric Anholt Fixes: 214613656b51 ("drm/vc4: Add an interface for capturing the GPU state after a hang.") --- drivers/gpu/drm/vc4/vc4_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index bfd1b5280ff3..fba2c831afe6 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -942,8 +942,8 @@ vc4_gem_destroy(struct drm_device *dev) vc4->overflow_mem = NULL; } - vc4_bo_cache_destroy(dev); - if (vc4->hang_state) vc4_free_hang_state(dev, vc4->hang_state); + + vc4_bo_cache_destroy(dev); } -- cgit v1.3-18-gd494 From 9326e6f25574bbb8bd48206d245654780e3fd665 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 Jul 2016 13:47:14 -0700 Subject: drm/vc4: Fix overflow mem unreferencing when the binner runs dry. Overflow memory handling is tricky: While it's still referenced by the BPO registers, we want to keep it from being freed. When we are putting a new set of overflow memory in the registers, we need to assign the old one to the last rendering job using it. We were looking at "what's currently running in the binner", but since the bin/render submission split, we may end up with the binner completing and having no new job while the renderer is still processing. So, if we don't find a bin job at all, look at the highest-seqno (last) render job to attach our overflow to. Signed-off-by: Eric Anholt Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Cc: stable@vger.kernel.org --- drivers/gpu/drm/vc4/vc4_drv.h | 9 +++++++++ drivers/gpu/drm/vc4/vc4_irq.c | 4 +++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h index 489e3de0c050..428e24919ef1 100644 --- a/drivers/gpu/drm/vc4/vc4_drv.h +++ b/drivers/gpu/drm/vc4/vc4_drv.h @@ -321,6 +321,15 @@ vc4_first_render_job(struct vc4_dev *vc4) struct vc4_exec_info, head); } +static inline struct vc4_exec_info * +vc4_last_render_job(struct vc4_dev *vc4) +{ + if (list_empty(&vc4->render_job_list)) + return NULL; + return list_last_entry(&vc4->render_job_list, + struct vc4_exec_info, head); +} + /** * struct vc4_texture_sample_info - saves the offsets into the UBO for texture * setup parameters. diff --git a/drivers/gpu/drm/vc4/vc4_irq.c b/drivers/gpu/drm/vc4/vc4_irq.c index b0104a346a74..094bc6a475c1 100644 --- a/drivers/gpu/drm/vc4/vc4_irq.c +++ b/drivers/gpu/drm/vc4/vc4_irq.c @@ -83,8 +83,10 @@ vc4_overflow_mem_work(struct work_struct *work) spin_lock_irqsave(&vc4->job_lock, irqflags); current_exec = vc4_first_bin_job(vc4); + if (!current_exec) + current_exec = vc4_last_render_job(vc4); if (current_exec) { - vc4->overflow_mem->seqno = vc4->finished_seqno + 1; + vc4->overflow_mem->seqno = current_exec->seqno; list_add_tail(&vc4->overflow_mem->unref_head, ¤t_exec->unref_list); vc4->overflow_mem = NULL; -- cgit v1.3-18-gd494 From 552416c146fadc67cd9b53ef7adf88d3381c43a6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 Jul 2016 13:47:15 -0700 Subject: drm/vc4: Fix oops when userspace hands in a bad BO. We'd end up NULL pointer dereferencing because we didn't take the error path out in the parent. Fixes igt vc4_lookup_fail test. Signed-off-by: Eric Anholt Fixes: d5b1a78a772f ("drm/vc4: Add support for drawing 3D frames.") Cc: stable@vger.kernel.org --- drivers/gpu/drm/vc4/vc4_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c index fba2c831afe6..b262c5c26f10 100644 --- a/drivers/gpu/drm/vc4/vc4_gem.c +++ b/drivers/gpu/drm/vc4/vc4_gem.c @@ -573,7 +573,7 @@ vc4_cl_lookup_bos(struct drm_device *dev, fail: drm_free_large(handles); - return 0; + return ret; } static int -- cgit v1.3-18-gd494 From c10ac75aeed2d8486a73a316ac3a08f85d140894 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 19 Aug 2016 20:58:26 -0700 Subject: ixgbe: Do not clear RAR entry when clearing VMDq for SAN MAC The RAR entry for the SAN MAC address was being cleared when we were clearing the VMDq pool bits. In order to prevent this we need to add an extra check to protect the SAN MAC from being cleared. Fixes: 6e982aeae ("ixgbe: Clear stale pool mappings") Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index b4217f30e89c..c47b605e8651 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -2958,8 +2958,10 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + if (mpsar_lo == 0 && mpsar_hi == 0 && + rar != 0 && rar != hw->mac.san_mac_rar_index) hw->mac.ops.clear_rar(hw, rar); + return 0; } -- cgit v1.3-18-gd494 From ff2e7d5d51469e98196f7933c83b781e96517e7c Mon Sep 17 00:00:00 2001 From: Shrikrishna Khare Date: Fri, 19 Aug 2016 10:33:42 -0700 Subject: vmxnet3: fix tx data ring copy for variable size 'Commit 3c8b3efc061a ("vmxnet3: allow variable length transmit data ring buffer")' changed the size of the buffers in the tx data ring from a fixed size of 128 bytes to a variable size. However, while copying data to the data ring, vmxnet3_copy_hdr continues to carry the old code that assumes fixed buffer size of 128. This patch fixes it by adding correct offset based on the actual data ring buffer size. Signed-off-by: Guolin Yang Signed-off-by: Shrikrishna Khare Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 4 +++- drivers/net/vmxnet3/vmxnet3_int.h | 4 ++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index c68fe495d3f9..4244b9d4418e 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -914,7 +914,9 @@ vmxnet3_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, { struct Vmxnet3_TxDataDesc *tdd; - tdd = tq->data_ring.base + tq->tx_ring.next2fill; + tdd = (struct Vmxnet3_TxDataDesc *)((u8 *)tq->data_ring.base + + tq->tx_ring.next2fill * + tq->txdata_desc_size); memcpy(tdd->data, skb->data, ctx->copy_size); netdev_dbg(adapter->netdev, diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 74fc03072b87..7dc37a090549 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -69,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.4.9.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.4.a.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01040900 +#define VMXNET3_DRIVER_VERSION_NUM 0x01040a00 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ -- cgit v1.3-18-gd494 From 6695593e4a7659db49ac6eca98c164f7b5589f72 Mon Sep 17 00:00:00 2001 From: Aleksandr Makarov Date: Sat, 20 Aug 2016 13:29:41 +0300 Subject: USB: serial: option: add WeTelecom WM-D200 Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bc472584a229..bb6a71120c03 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -525,6 +525,10 @@ static void option_instat_callback(struct urb *urb); #define VIATELECOM_VENDOR_ID 0x15eb #define VIATELECOM_PRODUCT_CDS7 0x0001 +/* WeTelecom products */ +#define WETELECOM_VENDOR_ID 0x22de +#define WETELECOM_PRODUCT_WMD200 0x6801 + struct option_blacklist_info { /* bitmask of interface numbers blacklisted for send_setup */ const unsigned long sendsetup; @@ -1991,6 +1995,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.3-18-gd494 From 5575cf133cf7f564da991595c6bc9344afa7d89a Mon Sep 17 00:00:00 2001 From: Daniel Romell Date: Fri, 19 Aug 2016 14:12:01 +0200 Subject: net: xilinx: emaclite: Fallback to random MAC address. If the address configured in the device tree is invalid, the driver will fallback to using a random address from the locally administered range. Signed-off-by: Daniel Romell Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 3cee84a24815..93dc10b10c09 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -1131,11 +1131,13 @@ static int xemaclite_of_probe(struct platform_device *ofdev) lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); mac_address = of_get_mac_address(ofdev->dev.of_node); - if (mac_address) + if (mac_address) { /* Set the MAC address. */ memcpy(ndev->dev_addr, mac_address, ETH_ALEN); - else - dev_warn(dev, "No MAC address found\n"); + } else { + dev_warn(dev, "No MAC address found, using random\n"); + eth_hw_addr_random(ndev); + } /* Clear the Tx CSR's in case this is a restart */ __raw_writel(0, lp->base_addr + XEL_TSR_OFFSET); -- cgit v1.3-18-gd494 From 522caebb2c3684f4a1d154526fb5e33f1381e92a Mon Sep 17 00:00:00 2001 From: Giorgio Dal Molin Date: Tue, 16 Aug 2016 20:43:37 +0200 Subject: iio:ti-ads1015: fix a wrong pointer definition. The call to i2c_get_clientdata(client) returns a struct iio_dev*, not the needed struct ads1015_data*. We need here an intermediate step as in the function: void ads1015_get_channels_config(struct i2c_client *client). Signed-off-by: Giorgio Dal Molin Fixes: ecc24e72f437 ("iio: adc: Add TI ADS1015 ADC driver support") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti-ads1015.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 1ef398770a1f..066abaf80201 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -489,7 +489,8 @@ static struct iio_info ads1115_info = { #ifdef CONFIG_OF static int ads1015_get_channels_config_of(struct i2c_client *client) { - struct ads1015_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct ads1015_data *data = iio_priv(indio_dev); struct device_node *node; if (!client->dev.of_node || -- cgit v1.3-18-gd494 From 80e162ee9b31d77d851b10f8c5299132be1e120f Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 29 Jun 2016 20:27:44 +0100 Subject: staging: comedi: daqboard2000: bug fix board type matching code `daqboard2000_find_boardinfo()` is supposed to check if the DaqBoard/2000 series model is supported, based on the PCI subvendor and subdevice ID. The current code is wrong as it is comparing the PCI device's subdevice ID to an expected, fixed value for the subvendor ID. It should be comparing the PCI device's subvendor ID to this fixed value. Correct it. Fixes: 7e8401b23e7f ("staging: comedi: daqboard2000: add back subsystem_device check") Signed-off-by: Ian Abbott Cc: # 3.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/daqboard2000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index 65daef0c00d5..0f4eb954aa80 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -634,7 +634,7 @@ static const void *daqboard2000_find_boardinfo(struct comedi_device *dev, const struct daq200_boardtype *board; int i; - if (pcidev->subsystem_device != PCI_VENDOR_ID_IOTECH) + if (pcidev->subsystem_vendor != PCI_VENDOR_ID_IOTECH) return NULL; for (i = 0; i < ARRAY_SIZE(boardtypes); i++) { -- cgit v1.3-18-gd494 From 403fe7f34e3327ddac2e06a15e76a293d613381e Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 30 Jun 2016 19:58:32 +0100 Subject: staging: comedi: comedi_test: fix timer race conditions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up") fixed a lock-up in the timer routine `waveform_ai_timer()` (which was called `waveform_ai_interrupt()` at the time) caused by commit 240512474424 ("staging: comedi: comedi_test: use comedi_handle_events()"). However, it introduced a race condition that can result in the timer routine misbehaving, such as accessing freed memory or dereferencing a NULL pointer. 73e0... changed the timer routine to do nothing unless a `WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()` to clear the flag and replace a call to `del_timer_sync()` with a call to `del_timer()`. `waveform_ai_cancel()` may be called from the timer routine itself (via `comedi_handle_events()`), or from `do_cancel()`. (`do_cancel()` is called as a result of a file operation (usually a `COMEDI_CANCEL` ioctl command, or a release), or during device removal.) When called from `do_cancel()`, the call to `waveform_ai_cancel()` is followed by a call to `do_become_nonbusy()`, which frees up stuff for the current asynchronous command under the assumption that it is now safe to do so. The race condition occurs when the timer routine `waveform_ai_timer()` checks the `WAVEFORM_AI_RUNNING` flag just before it is cleared by `waveform_ai_cancel()`, and is still running during the call to `do_become_nonbusy()`. In particular, it can lead to a NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] waveform_ai_timer+0x17d/0x290 [comedi_test] That corresponds to this line in `waveform_ai_timer()`: unsigned int chanspec = cmd->chanlist[async->cur_chan]; but `do_become_nonbusy()` frees `cmd->chanlist` and sets it to `NULL`. Fix the race by calling `del_timer_sync()` instead of `del_timer()` in `waveform_ai_cancel()` when not in an interrupt context. The only time `waveform_ai_cancel()` is called in an interrupt context is when it is called from the timer routine itself, via `comedi_handle_events()`. There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get rid of it. The bug was copied from the AI subdevice to the AO when support for commands on the AO subdevice was added by commit 0cf55bbef2f9 ("staging: comedi: comedi_test: implement commands on AO subdevice"). That involves the timer routine `waveform_ao_timer()`, the comedi "cancel" routine `waveform_ao_cancel()`, and the flag `WAVEFORM_AO_RUNNING`. Fix it in the same way as for the AI subdevice. Fixes: 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up") Fixes: 0cf55bbef2f9 ("staging: comedi: comedi_test: implement commands on AO subdevice") Reported-by: Éric Piel Signed-off-by: Ian Abbott Cc: # 4.4+ Cc: Éric Piel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/comedi_test.c | 46 ++++++++-------------------- 1 file changed, 12 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c index 4ab186669f0c..ec5b9a23494d 100644 --- a/drivers/staging/comedi/drivers/comedi_test.c +++ b/drivers/staging/comedi/drivers/comedi_test.c @@ -56,11 +56,6 @@ #define N_CHANS 8 -enum waveform_state_bits { - WAVEFORM_AI_RUNNING, - WAVEFORM_AO_RUNNING -}; - /* Data unique to this driver */ struct waveform_private { struct timer_list ai_timer; /* timer for AI commands */ @@ -68,7 +63,6 @@ struct waveform_private { unsigned int wf_amplitude; /* waveform amplitude in microvolts */ unsigned int wf_period; /* waveform period in microseconds */ unsigned int wf_current; /* current time in waveform period */ - unsigned long state_bits; unsigned int ai_scan_period; /* AI scan period in usec */ unsigned int ai_convert_period; /* AI conversion period in usec */ struct timer_list ao_timer; /* timer for AO commands */ @@ -191,10 +185,6 @@ static void waveform_ai_timer(unsigned long arg) unsigned int nsamples; unsigned int time_increment; - /* check command is still active */ - if (!test_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits)) - return; - now = ktime_to_us(ktime_get()); nsamples = comedi_nsamples_left(s, UINT_MAX); @@ -386,11 +376,6 @@ static int waveform_ai_cmd(struct comedi_device *dev, */ devpriv->ai_timer.expires = jiffies + usecs_to_jiffies(devpriv->ai_convert_period) + 1; - - /* mark command as active */ - smp_mb__before_atomic(); - set_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits); - smp_mb__after_atomic(); add_timer(&devpriv->ai_timer); return 0; } @@ -400,11 +385,12 @@ static int waveform_ai_cancel(struct comedi_device *dev, { struct waveform_private *devpriv = dev->private; - /* mark command as no longer active */ - clear_bit(WAVEFORM_AI_RUNNING, &devpriv->state_bits); - smp_mb__after_atomic(); - /* cannot call del_timer_sync() as may be called from timer routine */ - del_timer(&devpriv->ai_timer); + if (in_softirq()) { + /* Assume we were called from the timer routine itself. */ + del_timer(&devpriv->ai_timer); + } else { + del_timer_sync(&devpriv->ai_timer); + } return 0; } @@ -436,10 +422,6 @@ static void waveform_ao_timer(unsigned long arg) u64 scans_since; unsigned int scans_avail = 0; - /* check command is still active */ - if (!test_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits)) - return; - /* determine number of scan periods since last time */ now = ktime_to_us(ktime_get()); scans_since = now - devpriv->ao_last_scan_time; @@ -518,11 +500,6 @@ static int waveform_ao_inttrig_start(struct comedi_device *dev, devpriv->ao_last_scan_time = ktime_to_us(ktime_get()); devpriv->ao_timer.expires = jiffies + usecs_to_jiffies(devpriv->ao_scan_period); - - /* mark command as active */ - smp_mb__before_atomic(); - set_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits); - smp_mb__after_atomic(); add_timer(&devpriv->ao_timer); return 1; @@ -608,11 +585,12 @@ static int waveform_ao_cancel(struct comedi_device *dev, struct waveform_private *devpriv = dev->private; s->async->inttrig = NULL; - /* mark command as no longer active */ - clear_bit(WAVEFORM_AO_RUNNING, &devpriv->state_bits); - smp_mb__after_atomic(); - /* cannot call del_timer_sync() as may be called from timer routine */ - del_timer(&devpriv->ao_timer); + if (in_softirq()) { + /* Assume we were called from the timer routine itself. */ + del_timer(&devpriv->ao_timer); + } else { + del_timer_sync(&devpriv->ao_timer); + } return 0; } -- cgit v1.3-18-gd494 From 5ca05345c56cb979e1a25ab6146437002f95cac8 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 20 Jul 2016 17:07:34 +0100 Subject: staging: comedi: ni_mio_common: fix wrong insn_write handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For counter subdevices, the `s->insn_write` handler is being set to the wrong function, `ni_tio_insn_read()`. It should be `ni_tio_insn_write()`. Signed-off-by: Ian Abbott Reported-by: Éric Piel Fixes: 10f74377eec3 ("staging: comedi: ni_tio: make ni_tio_winsn() a proper comedi (*insn_write)" Cc: # 3.17+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_mio_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 8dabb19519a5..3cf3c05c5ef2 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -5480,7 +5480,7 @@ static int ni_E_init(struct comedi_device *dev, s->maxdata = (devpriv->is_m_series) ? 0xffffffff : 0x00ffffff; s->insn_read = ni_tio_insn_read; - s->insn_write = ni_tio_insn_read; + s->insn_write = ni_tio_insn_write; s->insn_config = ni_tio_insn_config; #ifdef PCIDMA if (dev->irq && devpriv->mite) { -- cgit v1.3-18-gd494 From c71f20ee76342376e3c4c67cdbe7421d8c4e886e Mon Sep 17 00:00:00 2001 From: Phil Turnbull Date: Fri, 29 Jul 2016 09:43:56 -0400 Subject: staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. The CMDF_ROUND_DOWN case falls through and so always returns -EINVAL. Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support") Signed-off-by: Phil Turnbull Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/adv_pci1760.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/adv_pci1760.c b/drivers/staging/comedi/drivers/adv_pci1760.c index d7dd1e55e347..9f525ff7290c 100644 --- a/drivers/staging/comedi/drivers/adv_pci1760.c +++ b/drivers/staging/comedi/drivers/adv_pci1760.c @@ -196,6 +196,7 @@ static int pci1760_pwm_ns_to_div(unsigned int flags, unsigned int ns) break; case CMDF_ROUND_DOWN: divisor = ns / PCI1760_PWM_TIMEBASE; + break; default: return -EINVAL; } -- cgit v1.3-18-gd494 From 5ac5c3bcf57419d0aa3f53b12b8c07599a13fdcc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Jun 2016 14:46:21 +0300 Subject: staging: comedi: dt2811: fix a precedence bug Bitwise | has higher precedence than ?: so we need to add some parenthesis for this to work as intended. Fixes: 7c9574090d30 ('staging: comedi: dt2811: simplify A/D reference configuration') Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt2811.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c index 904f637797b6..8bbd93814340 100644 --- a/drivers/staging/comedi/drivers/dt2811.c +++ b/drivers/staging/comedi/drivers/dt2811.c @@ -588,8 +588,8 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it) s = &dev->subdevices[0]; s->type = COMEDI_SUBD_AI; s->subdev_flags = SDF_READABLE | - (it->options[2] == 1) ? SDF_DIFF : - (it->options[2] == 2) ? SDF_COMMON : SDF_GROUND; + ((it->options[2] == 1) ? SDF_DIFF : + (it->options[2] == 2) ? SDF_COMMON : SDF_GROUND); s->n_chan = (it->options[2] == 1) ? 8 : 16; s->maxdata = 0x0fff; s->range_table = board->is_pgh ? &dt2811_pgh_ai_ranges -- cgit v1.3-18-gd494 From f0f4b0cc3a8cffd983f5940d46cd0227f3f5710a Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Tue, 19 Jul 2016 12:17:39 +0100 Subject: staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility Commit ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") introduced a backwards compatibility issue in the use of asynchronous commands on the AO subdevice when `start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT` (for internal, software trigger), and `TRIG_EXT` (for external trigger). When set to `TRIG_EXT`. In both cases, the driver relies on an internal, software trigger to set things up (allowing the user application to write sufficient samples to the data buffer before the trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case. The software trigger is handled by `ni_ao_inttrig()`. Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg` was required to be 0, and `ni_ao_inttrig()` checked that the software trigger number was also 0. After the above change, when `start_src` was `TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()` checked that the software trigger number matched this `start_arg` value. The backwards compatibility issue is that the internal trigger number now has to match `start_arg` when `start_src` is `TRIG_EXT` when it previously had to be 0. Fix the backwards compatibility issue in `ni_ao_inttrig()` by always allowing software trigger number 0 when `start_src` is something other than `TRIG_INT`. Thanks to Spencer Olson for reporting the issue. Signed-off-by: Ian Abbott Reported-by: Spencer Olson Fixes: ebb657babfa9 ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") Cc: stable Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_mio_common.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 3cf3c05c5ef2..0f97d7b611d7 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -2772,7 +2772,15 @@ static int ni_ao_inttrig(struct comedi_device *dev, int i; static const int timeout = 1000; - if (trig_num != cmd->start_arg) + /* + * Require trig_num == cmd->start_arg when cmd->start_src == TRIG_INT. + * For backwards compatibility, also allow trig_num == 0 when + * cmd->start_src != TRIG_INT (i.e. when cmd->start_src == TRIG_EXT); + * in that case, the internal trigger is being used as a pre-trigger + * before the external trigger. + */ + if (!(trig_num == cmd->start_arg || + (trig_num == 0 && cmd->start_src != TRIG_INT))) return -EINVAL; /* -- cgit v1.3-18-gd494 From fcf68f3c0bb2a541aa47a2a38b8939edf84fd529 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 8 Aug 2016 17:19:38 -0700 Subject: iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" When using CONFIG_DEBUG_ATOMIC_SLEEP, the scheduler nicely points out that we're calling sleeping primitives within the wait_event loop, which means we might clobber the task state: [ 10.831289] do not call blocking ops when !TASK_RUNNING; state=1 set at [] [ 10.845531] ------------[ cut here ]------------ [ 10.850161] WARNING: at kernel/sched/core.c:7630 ... [ 12.164333] ---[ end trace 45409966a9a76438 ]--- [ 12.168942] Call trace: [ 12.171391] [] __might_sleep+0x64/0x90 [ 12.176699] [] mutex_lock_nested+0x50/0x3fc [ 12.182440] [] iio_kfifo_buf_data_available+0x28/0x4c [ 12.189043] [] iio_buffer_ready+0x60/0xe0 [ 12.194608] [] iio_buffer_read_first_n_outer+0x108/0x1a8 [ 12.201474] [] __vfs_read+0x58/0x114 [ 12.206606] [] vfs_read+0x94/0x118 [ 12.211564] [] SyS_read+0x64/0xb4 [ 12.216436] [] el0_svc_naked+0x24/0x28 To avoid this, we should (a la https://lwn.net/Articles/628628/) use the wait_woken() function, which avoids the nested sleeping while still handling races between waiting / wake-events. Signed-off-by: Brian Norris Reviewed-by: Lars-Peter Clausen Cc: # 3.19+ for introduction of wake_woken Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-buffer.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 90462fcf5436..49bf9c59f117 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -107,6 +107,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf, { struct iio_dev *indio_dev = filp->private_data; struct iio_buffer *rb = indio_dev->buffer; + DEFINE_WAIT_FUNC(wait, woken_wake_function); size_t datum_size; size_t to_wait; int ret; @@ -131,19 +132,29 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf, else to_wait = min_t(size_t, n / datum_size, rb->watermark); + add_wait_queue(&rb->pollq, &wait); do { - ret = wait_event_interruptible(rb->pollq, - iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)); - if (ret) - return ret; + if (!indio_dev->info) { + ret = -ENODEV; + break; + } - if (!indio_dev->info) - return -ENODEV; + if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) { + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + wait_woken(&wait, TASK_INTERRUPTIBLE, + MAX_SCHEDULE_TIMEOUT); + continue; + } ret = rb->access->read_first_n(rb, n, buf); if (ret == 0 && (filp->f_flags & O_NONBLOCK)) ret = -EAGAIN; } while (ret == 0); + remove_wait_queue(&rb->pollq, &wait); return ret; } -- cgit v1.3-18-gd494 From ca64d4bc80a88845f7e1e266dbff798f928bcc06 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 25 Jul 2016 23:06:56 +0100 Subject: iio: chemical: atlas-ph-sensor: fix typo in val assignment Fix an incorrect assignment due to a typo on a variable name. The variable val2 should be assigned 100000 and not val. Signed-off-by: Colin Ian King Reviewed-By: Matt Ranostay Signed-off-by: Jonathan Cameron --- drivers/iio/chemical/atlas-ph-sensor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c index ae038a59d256..407f141a1eee 100644 --- a/drivers/iio/chemical/atlas-ph-sensor.c +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -434,7 +434,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev, break; case IIO_ELECTRICALCONDUCTIVITY: *val = 1; /* 0.00001 */ - *val = 100000; + *val2 = 100000; break; case IIO_CONCENTRATION: *val = 0; /* 0.000000001 */ -- cgit v1.3-18-gd494 From 23535c1322e42e71f32bfbeae9970f4dba31e3bd Mon Sep 17 00:00:00 2001 From: Binoy Jayan Date: Thu, 21 Jul 2016 13:26:56 +0530 Subject: staging: wilc1000: txq_event: Fix coding error Fix incorrect usage of completion interface by replacing 'wait_for_completion' with 'complete'. This error was introduced accidentally while replacing semaphores with mutexes. Reported-by: Jiri Slaby Signed-off-by: Binoy Jayan Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wilc1000/linux_wlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c index 3a66255f14fc..32215110d597 100644 --- a/drivers/staging/wilc1000/linux_wlan.c +++ b/drivers/staging/wilc1000/linux_wlan.c @@ -648,7 +648,7 @@ void wilc1000_wlan_deinit(struct net_device *dev) mutex_unlock(&wl->hif_cs); } if (&wl->txq_event) - wait_for_completion(&wl->txq_event); + complete(&wl->txq_event); wlan_deinitialize_threads(dev); deinit_irq(dev); -- cgit v1.3-18-gd494 From 23436825e671cdd55c45d151ddc66fd3c47d10e9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 16 Jul 2016 13:07:55 +0300 Subject: staging: wilc1000: NULL dereference on error We can't pass NULL pointers to destroy_workqueue(). Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wilc1000/host_interface.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c index 0b1760cba6e3..78f524fcd214 100644 --- a/drivers/staging/wilc1000/host_interface.c +++ b/drivers/staging/wilc1000/host_interface.c @@ -3363,7 +3363,7 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler) if (!hif_workqueue) { netdev_err(vif->ndev, "Failed to create workqueue\n"); result = -ENOMEM; - goto _fail_mq_; + goto _fail_; } setup_timer(&periodic_rssi, GetPeriodicRSSI, @@ -3391,7 +3391,6 @@ int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler) clients_count++; -_fail_mq_: destroy_workqueue(hif_workqueue); _fail_: return result; -- cgit v1.3-18-gd494 From 6c08fda0306916135291103f23cc17248c422c49 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 15 Aug 2016 17:09:52 +0100 Subject: staging: wilc1000: correctly check if associatedsta has not been found The current check for associatedsta being set to -1 to indicate it has not been found is not working because associatedsta is initialized to zero and will never be -1. Fix this by initializing it to ~0 and checking for ~0 instead. Signed-off-by: Colin Ian King Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index 9092600a1794..2c2e8aca8305 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -1191,7 +1191,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev, struct wilc_priv *priv; struct wilc_vif *vif; u32 i = 0; - u32 associatedsta = 0; + u32 associatedsta = ~0; u32 inactive_time = 0; priv = wiphy_priv(wiphy); vif = netdev_priv(dev); @@ -1204,7 +1204,7 @@ static int get_station(struct wiphy *wiphy, struct net_device *dev, } } - if (associatedsta == -1) { + if (associatedsta == ~0) { netdev_err(dev, "sta required is not associated\n"); return -ENOENT; } -- cgit v1.3-18-gd494 From 90c43ec6997a892448f1f86180a515f59cafd8a3 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 17 Aug 2016 17:43:00 +0530 Subject: iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access It is possible that two or more ADC channels can be simultaneously requested for raw samples, in which case there can be race in access to FIFO data resulting in loss of samples. If am335x_tsc_se_set_once() is called again from tiadc_read_raw(), when ADC is still acquired to sample one of the channels, the second process might be put into uninterruptible sleep state. Fix these issues, by protecting FIFO access and channel configurations with a mutex. Since tiadc_read_raw() might take anywhere between few microseconds to few milliseconds to finish execution (depending on averaging and delay values supplied via DT), its better to use mutex instead of spinlock. Fixes: 7ca6740cd1cd4 ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization") Signed-off-by: Vignesh R Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index 8a368756881b..bed9977a1863 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -32,6 +32,7 @@ struct tiadc_device { struct ti_tscadc_dev *mfd_tscadc; + struct mutex fifo1_lock; /* to protect fifo access */ int channels; u8 channel_line[8]; u8 channel_step[8]; @@ -359,6 +360,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct tiadc_device *adc_dev = iio_priv(indio_dev); + int ret = IIO_VAL_INT; int i, map_val; unsigned int fifo1count, read, stepid; bool found = false; @@ -372,6 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, if (!step_en) return -EINVAL; + mutex_lock(&adc_dev->fifo1_lock); fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT); while (fifo1count--) tiadc_readl(adc_dev, REG_FIFO1); @@ -388,7 +391,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, if (time_after(jiffies, timeout)) { am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); - return -EAGAIN; + ret = -EAGAIN; + goto err_unlock; } } map_val = adc_dev->channel_step[chan->scan_index]; @@ -414,8 +418,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, am335x_tsc_se_adc_done(adc_dev->mfd_tscadc); if (found == false) - return -EBUSY; - return IIO_VAL_INT; + ret = -EBUSY; + +err_unlock: + mutex_unlock(&adc_dev->fifo1_lock); + return ret; } static const struct iio_info tiadc_info = { @@ -483,6 +490,7 @@ static int tiadc_probe(struct platform_device *pdev) tiadc_step_config(indio_dev); tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD); + mutex_init(&adc_dev->fifo1_lock); err = tiadc_channel_init(indio_dev, adc_dev->channels); if (err < 0) -- cgit v1.3-18-gd494 From 7175cce1c3f1d8c8840d2004f78f96a3904249b5 Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 17 Aug 2016 17:43:01 +0530 Subject: iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample Now that open delay and sample delay for each channel is configurable via DT, the default IDLE_TIMEOUT value is not enough as this is calculated based on hardcoded macros. This results in driver returning EBUSY sometimes. Fix this by increasing the timeout value based on maximum value possible to open delay and sample delays for each channel. Fixes: 5dc11e810676e ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters") Signed-off-by: Vignesh R Acked-by: Lee Jones Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ti_am335x_adc.c | 2 +- include/linux/mfd/ti_am335x_tscadc.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index bed9977a1863..c3cfacca2541 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -381,7 +381,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en); - timeout = jiffies + usecs_to_jiffies + timeout = jiffies + msecs_to_jiffies (IDLE_TIMEOUT * adc_dev->channels); /* Wait for Fifo threshold interrupt */ while (1) { diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 2567a87872b0..7f55b8b41032 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -138,16 +138,16 @@ /* * time in us for processing a single channel, calculated as follows: * - * num cycles = open delay + (sample delay + conv time) * averaging + * max num cycles = open delay + (sample delay + conv time) * averaging * - * num cycles: 152 + (1 + 13) * 16 = 376 + * max num cycles: 262143 + (255 + 13) * 16 = 266431 * * clock frequency: 26MHz / 8 = 3.25MHz * clock period: 1 / 3.25MHz = 308ns * - * processing time: 376 * 308ns = 116us + * max processing time: 266431 * 308ns = 83ms(approx) */ -#define IDLE_TIMEOUT 116 /* microsec */ +#define IDLE_TIMEOUT 83 /* milliseconds */ #define TSCADC_CELLS 2 -- cgit v1.3-18-gd494 From 7ac61a062f3147dc23e3f12b9dfe7c4dd35f9cb8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 16 Aug 2016 15:33:28 +0200 Subject: iio: accel: kxsd9: Fix raw read return Any readings from the raw interface of the KXSD9 driver will return an empty string, because it does not return IIO_VAL_INT but rather some random value from the accelerometer to the caller. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index 3a9f106787d2..da5fb67ecb34 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -160,6 +160,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, if (ret < 0) goto error_ret; *val = ret; + ret = IIO_VAL_INT; break; case IIO_CHAN_INFO_SCALE: ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); -- cgit v1.3-18-gd494 From d524d84b588e300418a99794eb5066683ec7c488 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 21 Aug 2016 15:24:33 +0100 Subject: net: tehuti: fix typo: "eneble" -> "enable" trivial typo fix in pr_err message Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/tehuti/tehuti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/tehuti/tehuti.c b/drivers/net/ethernet/tehuti/tehuti.c index 7452b5f9d024..7108c68f16d3 100644 --- a/drivers/net/ethernet/tehuti/tehuti.c +++ b/drivers/net/ethernet/tehuti/tehuti.c @@ -1987,7 +1987,7 @@ bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) { err = pci_enable_msi(pdev); if (err) - pr_err("Can't eneble msi. error is %d\n", err); + pr_err("Can't enable msi. error is %d\n", err); else nic->irq_type = IRQ_MSI; } else -- cgit v1.3-18-gd494 From aded76bac54d1dd0a9c9203aa29a78423edc4cde Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Sun, 14 Aug 2016 21:42:17 +0200 Subject: drivers/macintosh: Delete owner assignment The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/ams/ams-i2c.c | 1 - drivers/macintosh/windfarm_pm112.c | 1 - drivers/macintosh/windfarm_pm72.c | 1 - drivers/macintosh/windfarm_rm31.c | 1 - 4 files changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c index 978eda8d6678..8a3ba565106f 100644 --- a/drivers/macintosh/ams/ams-i2c.c +++ b/drivers/macintosh/ams/ams-i2c.c @@ -73,7 +73,6 @@ MODULE_DEVICE_TABLE(i2c, ams_id); static struct i2c_driver ams_i2c_driver = { .driver = { .name = "ams", - .owner = THIS_MODULE, }, .probe = ams_i2c_probe, .remove = ams_i2c_remove, diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c index 3024685e4cca..96d16fca68b2 100644 --- a/drivers/macintosh/windfarm_pm112.c +++ b/drivers/macintosh/windfarm_pm112.c @@ -668,7 +668,6 @@ static struct platform_driver wf_pm112_driver = { .remove = wf_pm112_remove, .driver = { .name = "windfarm", - .owner = THIS_MODULE, }, }; diff --git a/drivers/macintosh/windfarm_pm72.c b/drivers/macintosh/windfarm_pm72.c index 2f506b9d5a52..e88cfb36a74d 100644 --- a/drivers/macintosh/windfarm_pm72.c +++ b/drivers/macintosh/windfarm_pm72.c @@ -789,7 +789,6 @@ static struct platform_driver wf_pm72_driver = { .remove = wf_pm72_remove, .driver = { .name = "windfarm", - .owner = THIS_MODULE, }, }; diff --git a/drivers/macintosh/windfarm_rm31.c b/drivers/macintosh/windfarm_rm31.c index 82fc86a90c1a..bdfcb8a8bfbb 100644 --- a/drivers/macintosh/windfarm_rm31.c +++ b/drivers/macintosh/windfarm_rm31.c @@ -682,7 +682,6 @@ static struct platform_driver wf_rm31_driver = { .remove = wf_rm31_remove, .driver = { .name = "windfarm", - .owner = THIS_MODULE, }, }; -- cgit v1.3-18-gd494 From 6f38a8b9a45833495dc878c335c5431cd98a16ed Mon Sep 17 00:00:00 2001 From: Andrew Donnellan Date: Thu, 18 Aug 2016 17:35:14 +1000 Subject: cxl: use pcibios_free_controller_deferred() when removing vPHBs When cxl removes a vPHB, it's possible that the pci_controller may be freed before all references to the devices on the vPHB have been released. This in turn causes an invalid memory access when the devices are eventually released, as pcibios_release_device() attempts to call the phb's release_device hook. In cxl_pci_vphb_remove(), remove the existing call to pcibios_free_controller(). Instead, use pcibios_free_controller_deferred() to free the pci_controller after all devices have been released. Export pci_set_host_bridge_release() so we can do this. Cc: stable@vger.kernel.org Signed-off-by: Andrew Donnellan Reviewed-by: Matthew R. Ochs Acked-by: Ian Munsie Signed-off-by: Benjamin Herrenschmidt --- drivers/misc/cxl/vphb.c | 10 +++++++++- drivers/pci/host-bridge.c | 1 + 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c index 7ada5f1b7bb6..3519acebfdab 100644 --- a/drivers/misc/cxl/vphb.c +++ b/drivers/misc/cxl/vphb.c @@ -230,6 +230,11 @@ int cxl_pci_vphb_add(struct cxl_afu *afu) if (phb->bus == NULL) return -ENXIO; + /* Set release hook on root bus */ + pci_set_host_bridge_release(to_pci_host_bridge(phb->bus->bridge), + pcibios_free_controller_deferred, + (void *) phb); + /* Claim resources. This might need some rework as well depending * whether we are doing probe-only or not, like assigning unassigned * resources etc... @@ -256,7 +261,10 @@ void cxl_pci_vphb_remove(struct cxl_afu *afu) afu->phb = NULL; pci_remove_root_bus(phb->bus); - pcibios_free_controller(phb); + /* + * We don't free phb here - that's handled by + * pcibios_free_controller_deferred() + */ } static bool _cxl_pci_is_vphb_device(struct pci_controller *phb) diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c index 5f4a2e04c8d7..add66236215c 100644 --- a/drivers/pci/host-bridge.c +++ b/drivers/pci/host-bridge.c @@ -44,6 +44,7 @@ void pci_set_host_bridge_release(struct pci_host_bridge *bridge, bridge->release_fn = release_fn; bridge->release_data = release_data; } +EXPORT_SYMBOL_GPL(pci_set_host_bridge_release); void pcibios_resource_to_bus(struct pci_bus *bus, struct pci_bus_region *region, struct resource *res) -- cgit v1.3-18-gd494 From 6f00975c619064a18c23fd3aced325ae165a73b9 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sat, 20 Aug 2016 12:22:11 +0200 Subject: drm: Reject page_flip for !DRIVER_MODESET Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by: Alexander Potapenko Cc: Alexander Potapenko Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Reviewed-by: Chris Wilson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index b1dbb60af99f..ddebe54cd5ca 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -5404,6 +5404,9 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev, struct drm_pending_vblank_event *e = NULL; int ret = -EINVAL; + if (!drm_core_check_feature(dev, DRIVER_MODESET)) + return -EINVAL; + if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS || page_flip->reserved != 0) return -EINVAL; -- cgit v1.3-18-gd494 From 93e11eb1b745ee8dbd4f98f24b542d496c8f1e03 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 10 Aug 2016 13:44:56 +0000 Subject: dmaengine: fsl_raid: add missing of_node_put() in fsl_re_probe() When terminating for_each_compatible_node() iteration with break or return, of_node_put() should be used to prevent stale device node references from being left behind. Found by Coccinelle. Signed-off-by: Wei Yongjun Signed-off-by: Vinod Koul --- drivers/dma/fsl_raid.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c index aad167eaaee8..de2a2a2b1d75 100644 --- a/drivers/dma/fsl_raid.c +++ b/drivers/dma/fsl_raid.c @@ -836,6 +836,7 @@ static int fsl_re_probe(struct platform_device *ofdev) rc = of_property_read_u32(np, "reg", &off); if (rc) { dev_err(dev, "Reg property not found in JQ node\n"); + of_node_put(np); return -ENODEV; } /* Find out the Job Rings present under each JQ */ -- cgit v1.3-18-gd494 From 6a8b0c6b18f62a277ffb2139d0c0253fe35d7feb Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 10 Aug 2016 03:17:09 +0000 Subject: dmaengine: at_xdmac: fix to pass correct device identity to free_irq() free_irq() expects the same device identity that was passed to corresponding request_irq(), otherwise the IRQ is not freed. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Wei Yongjun Acked-by: Ludovic Desroches Signed-off-by: Vinod Koul --- drivers/dma/at_xdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index e434ffe7bc5c..832cbd647145 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -2067,7 +2067,7 @@ err_dma_unregister: err_clk_disable: clk_disable_unprepare(atxdmac->clk); err_free_irq: - free_irq(atxdmac->irq, atxdmac->dma.dev); + free_irq(atxdmac->irq, atxdmac); return ret; } @@ -2081,7 +2081,7 @@ static int at_xdmac_remove(struct platform_device *pdev) dma_async_device_unregister(&atxdmac->dma); clk_disable_unprepare(atxdmac->clk); - free_irq(atxdmac->irq, atxdmac->dma.dev); + free_irq(atxdmac->irq, atxdmac); for (i = 0; i < atxdmac->dma.chancnt; i++) { struct at_xdmac_chan *atchan = &atxdmac->chan[i]; -- cgit v1.3-18-gd494 From 32e80820de5d7eb778632af8f235727a32d3aeb2 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Tue, 16 Aug 2016 10:44:18 +0200 Subject: dmaengine: img-mdc: fix a possible NULL dereference of_match_device could return NULL, and so cause a NULL pointer dereference later at line 850: mdma->soc = match->data; For fixing this problem, we use of_device_get_match_data(), this will simplify the code a little by using a standard function for getting the match data. This was reported by coverity (CID 1324134) Signed-off-by: LABBE Corentin Signed-off-by: Vinod Koul --- drivers/dma/img-mdc-dma.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/img-mdc-dma.c b/drivers/dma/img-mdc-dma.c index a4c53be482cf..624f1e1e9c55 100644 --- a/drivers/dma/img-mdc-dma.c +++ b/drivers/dma/img-mdc-dma.c @@ -861,7 +861,6 @@ static int mdc_dma_probe(struct platform_device *pdev) { struct mdc_dma *mdma; struct resource *res; - const struct of_device_id *match; unsigned int i; u32 val; int ret; @@ -871,8 +870,7 @@ static int mdc_dma_probe(struct platform_device *pdev) return -ENOMEM; platform_set_drvdata(pdev, mdma); - match = of_match_device(mdc_dma_of_match, &pdev->dev); - mdma->soc = match->data; + mdma->soc = of_device_get_match_data(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); mdma->regs = devm_ioremap_resource(&pdev->dev, res); -- cgit v1.3-18-gd494 From f6c274e11e3b31a5f95c23962b1ba593bd6a4759 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 28 Jul 2016 10:16:12 +0300 Subject: usb: dwc3: pci: runtime_resume child device During runtime_resume of dwc3-pci.c, we need to runtime suspend our child device (which is dwc3 proper) otherwise nothing will happen. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 2eb84d6c24a6..0a32430f4c41 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -243,6 +243,13 @@ static int dwc3_pci_runtime_suspend(struct device *dev) return -EBUSY; } +static int dwc3_pci_runtime_resume(struct device *dev) +{ + struct platform_device *dwc3 = dev_get_drvdata(dev); + + return pm_runtime_get(&dwc3->dev); +} + static int dwc3_pci_pm_dummy(struct device *dev) { /* @@ -259,7 +266,7 @@ static int dwc3_pci_pm_dummy(struct device *dev) static struct dev_pm_ops dwc3_pci_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy) - SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_pm_dummy, + SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_runtime_resume, NULL) }; -- cgit v1.3-18-gd494 From b74c2d875baaa07186f617c5617f4c5e3a8a41ad Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 28 Jul 2016 13:07:07 +0300 Subject: usb: dwc3: core: allow device to runtime_suspend several times After going through runtime_suspend/runtime_resume cycle once we would be left with an unbalanced pm_runtime_get() call. Fix that by making sure that we try to suspend right after resuming so things are balanced and device can runtime_suspend again. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 946643157b78..35d092456bec 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1192,6 +1192,7 @@ static int dwc3_runtime_resume(struct device *dev) } pm_runtime_mark_last_busy(dev); + pm_runtime_put(dev); return 0; } -- cgit v1.3-18-gd494 From 83f8da562f8b5275fa1095b45762996971f7c607 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 10 Aug 2016 08:53:34 -0500 Subject: usb: dwc2: Add reset control to dwc2 Allow for platforms that have a reset controller driver in place to bring the USB IP out of reset. Signed-off-by: Dinh Nguyen Acked-by: John Youn Tested-by: Stefan Wahren Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/core.h | 1 + drivers/usb/dwc2/platform.c | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 9fae0291cd69..d64551243789 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -868,6 +868,7 @@ struct dwc2_hsotg { void *priv; int irq; struct clk *clk; + struct reset_control *reset; unsigned int queuing_high_bandwidth:1; unsigned int srp_success:1; diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index fc6f5251de5d..530959a8a6d1 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -45,6 +45,7 @@ #include #include #include +#include #include @@ -337,6 +338,24 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) { int i, ret; + hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); + if (IS_ERR(hsotg->reset)) { + ret = PTR_ERR(hsotg->reset); + switch (ret) { + case -ENOENT: + case -ENOTSUPP: + hsotg->reset = NULL; + break; + default: + dev_err(hsotg->dev, "error getting reset control %d\n", + ret); + return ret; + } + } + + if (hsotg->reset) + reset_control_deassert(hsotg->reset); + /* Set default UTMI width */ hsotg->phyif = GUSBCFG_PHYIF16; @@ -434,6 +453,9 @@ static int dwc2_driver_remove(struct platform_device *dev) if (hsotg->ll_hw_enabled) dwc2_lowlevel_hw_disable(hsotg); + if (hsotg->reset) + reset_control_assert(hsotg->reset); + return 0; } -- cgit v1.3-18-gd494 From 3295235fd70ed6d594aadee8c892a14f6a4b2d2e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 13 Aug 2016 01:28:24 +0000 Subject: usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe() In case of error, the function usb_get_phy() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: # v4.3+ Acked-by: Yoshihiro Shimoda Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 92bc83b92d10..c4c64740a3e7 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1076,7 +1076,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); dev_info(dev, "%stransceiver found\n", - gpriv->transceiver ? "" : "no "); + !IS_ERR(gpriv->transceiver) ? "" : "no "); /* * CAUTION -- cgit v1.3-18-gd494 From 70237dc8efd092b93b40dc2eba812d66a5d65cb1 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 11 Aug 2016 15:51:45 +0800 Subject: usb: gadget: function: f_eem: socket buffer may be NULL In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_eem.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index d58bfc32be9e..8741fd740174 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -341,11 +341,15 @@ static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) { struct sk_buff *skb2 = NULL; struct usb_ep *in = port->in_ep; - int padlen = 0; + int headroom, tailroom, padlen = 0; u16 len = skb->len; - int headroom = skb_headroom(skb); - int tailroom = skb_tailroom(skb); + if (!skb) + return NULL; + + len = skb->len; + headroom = skb_headroom(skb); + tailroom = skb_tailroom(skb); /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0, * stick two bytes of zero-length EEM packet on the end. -- cgit v1.3-18-gd494 From 80d1642d7640ef00d8823f17a529785331aceb96 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Thu, 11 Aug 2016 15:51:46 +0800 Subject: usb: gadget: function: f_rndis: socket buffer may be NULL In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer check at .wrap API. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_rndis.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_rndis.c b/drivers/usb/gadget/function/f_rndis.c index c8005823b190..16562e461121 100644 --- a/drivers/usb/gadget/function/f_rndis.c +++ b/drivers/usb/gadget/function/f_rndis.c @@ -374,6 +374,9 @@ static struct sk_buff *rndis_add_header(struct gether *port, { struct sk_buff *skb2; + if (!skb) + return NULL; + skb2 = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type)); rndis_add_hdr(skb2); -- cgit v1.3-18-gd494 From f4693b08cc901912a87369c46537b94ed4084ea0 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 15 Jul 2016 14:15:47 +0300 Subject: usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame() We can't assign -EINVAL to a u16. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/fsl_qe_udc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index cf8819a5c5b2..8bb011ea78f7 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -1878,11 +1878,8 @@ static int qe_get_frame(struct usb_gadget *gadget) tmp = in_be16(&udc->usb_param->frame_n); if (tmp & 0x8000) - tmp = tmp & 0x07ff; - else - tmp = -EINVAL; - - return (int)tmp; + return tmp & 0x07ff; + return -EINVAL; } static int fsl_qe_start(struct usb_gadget *gadget, -- cgit v1.3-18-gd494 From d6011f6fc21b4d4ab1586f01c4f62becaa0a28d7 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 16 Aug 2016 10:22:38 +0100 Subject: usb: dwc3: gadget: don't rely on jiffies while holding spinlock __dwc3_gadget_wakeup() is called while holding a spinlock, then depends on jiffies in order to timeout while polling the USB core for a link state update. In the case the wakeup failed, the timeout will never happen and will also cause the cpu to stall until rcu_preempt kicks in. This switches to a "decrement variable and wait" timeout scheme. Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 1f5597ef945d..122e64df2f4d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1433,7 +1433,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g) static int __dwc3_gadget_wakeup(struct dwc3 *dwc) { - unsigned long timeout; + int retries; int ret; u32 reg; @@ -1484,9 +1484,9 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) } /* poll until Link State changes to ON */ - timeout = jiffies + msecs_to_jiffies(100); + retries = 20000; - while (!time_after(jiffies, timeout)) { + while (retries--) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); /* in HS, means ON */ -- cgit v1.3-18-gd494 From 511a36d2f357724312bb3776d2f6eed3890928b2 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 30 Jun 2016 17:10:23 +0800 Subject: usb: gadget: Add the gserial port checking in gs_start_tx() When usb gadget is set gadget serial function, it will be crash in below situation. It will clean the 'port->port_usb' pointer in gserial_disconnect() function when usb link is inactive, but it will release lock for disabling the endpoints in this function. Druing the lock release period, it maybe complete one request to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb' pointer had been set NULL, thus it will be crash in gs_start_tx() function. This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function to avoid this situation. Signed-off-by: Baolin Wang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_serial.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 6ded6345cd09..e0cd1e4c8892 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -375,10 +375,15 @@ __acquires(&port->port_lock) */ { struct list_head *pool = &port->write_pool; - struct usb_ep *in = port->port_usb->in; + struct usb_ep *in; int status = 0; bool do_tty_wake = false; + if (!port->port_usb) + return status; + + in = port->port_usb->in; + while (!port->write_busy && !list_empty(pool)) { struct usb_request *req; int len; -- cgit v1.3-18-gd494 From f4750a46a0dee58f7a65b438b28a092669b609aa Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Fri, 17 Jun 2016 13:42:18 -0700 Subject: drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2) intel_state->active_crtcs is usually only initialized when doing a modeset. During our first atomic commit after boot, we're effectively faking a modeset to sanitize the DDB/wm setup, so ensure that this field gets initialized before use. v2: - Don't clobber active_crtcs if our first commit really is a modeset (Maarten) - Grab connection_mutex when faking a modeset during sanitization (Maarten) Reported-by: Tvrtko Ursulin Cc: Tvrtko Ursulin Cc: Maarten Lankhorst Signed-off-by: Matt Roper Tested-by: Tvrtko Ursulin Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-2-git-send-email-matthew.d.roper@intel.com Cc: stable@vger.kernel.org #v4.7+ (cherry picked from commit 1b54a880b250acc226b13cea221b90aa1b3e37dd) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index d5deb58a2128..e9763a89f3d7 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3912,9 +3912,24 @@ skl_compute_ddb(struct drm_atomic_state *state) * pretend that all pipes switched active status so that we'll * ensure a full DDB recompute. */ - if (dev_priv->wm.distrust_bios_wm) + if (dev_priv->wm.distrust_bios_wm) { + ret = drm_modeset_lock(&dev->mode_config.connection_mutex, + state->acquire_ctx); + if (ret) + return ret; + intel_state->active_pipe_changes = ~0; + /* + * We usually only initialize intel_state->active_crtcs if we + * we're doing a modeset; make sure this field is always + * initialized during the sanitization process that happens + * on the first commit too. + */ + if (!intel_state->modeset) + intel_state->active_crtcs = dev_priv->active_crtcs; + } + /* * If the modeset changes which CRTC's are active, we need to * recompute the DDB allocation for *all* active pipes, even -- cgit v1.3-18-gd494 From c7aca235aa60d1432c95b752812d359d0dbece4f Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Fri, 17 Jun 2016 13:42:20 -0700 Subject: drm/i915/gen9: Drop invalid WARN() during data rate calculation It's possible to have a non-zero plane mask and still wind up with a total data rate of zero. There are two cases where this can happen: * planes are active (from the KMS point of view), but are all fully clipped (positioned offscreen) * the only active plane on a CRTC is the cursor (which is handled independently and not counted into the general data rate computations These are both valid display setups (although unusual), so we need to drop the WARN(). Signed-off-by: Matt Roper Reviewed-by: Maarten Lankhorst Testcase: kms_universal_planes.cursor-only-pipe-* Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-4-git-send-email-matthew.d.roper@intel.com Cc: stable@vger.kernel.org #v4.7+ (cherry picked from commit 43aa7e87507f519b0b2497b6fac1e894554eaef2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index e9763a89f3d7..421c5b72464a 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3107,8 +3107,6 @@ skl_get_total_relative_data_rate(struct intel_crtc_state *intel_cstate) total_data_rate += intel_cstate->wm.skl.plane_y_data_rate[id]; } - WARN_ON(cstate->plane_mask && total_data_rate == 0); - return total_data_rate; } -- cgit v1.3-18-gd494 From dcd79934b0dd803fdb29216fbd6f4a899a66f466 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 18 Aug 2016 17:16:40 +0100 Subject: drm/i915: Unconditionally flush any chipset buffers before execbuf MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If userspace is asynchronously streaming into the batch or other execobjects, we may not flush those writes along with a change in cache domain (as there is no change). Therefore those writes may end up in internal chipset buffers and not visible to the GPU upon execution. We must issue a flush command or otherwise we encounter incoherency in the batchbuffers and the GPU executing invalid commands (i.e. hanging) quite regularly. v2: Throw a paranoid wmb() into the general flush so that we remain consistent with before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841 Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user...") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Daniel Vetter Cc: Tvrtko Ursulin Tested-by: Matti Hämäläinen Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-1-chris@chris-wilson.co.uk (cherry picked from commit 600f436801deae65e48404847b61c89b4944e355) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gem_execbuffer.c | 13 +++---------- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 20fe9d52e256..3ca674e9c105 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3591,6 +3591,7 @@ int i915_gem_evict_vm(struct i915_address_space *vm, bool do_idle); /* belongs in i915_gem_gtt.h */ static inline void i915_gem_chipset_flush(struct drm_i915_private *dev_priv) { + wmb(); if (INTEL_GEN(dev_priv) < 6) intel_gtt_chipset_flush(); } diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 1978633e7549..b35e5b6475b2 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -943,8 +943,6 @@ i915_gem_execbuffer_move_to_gpu(struct drm_i915_gem_request *req, { const unsigned other_rings = ~intel_engine_flag(req->engine); struct i915_vma *vma; - uint32_t flush_domains = 0; - bool flush_chipset = false; int ret; list_for_each_entry(vma, vmas, exec_list) { @@ -957,16 +955,11 @@ i915_gem_execbuffer_move_to_gpu(struct drm_i915_gem_request *req, } if (obj->base.write_domain & I915_GEM_DOMAIN_CPU) - flush_chipset |= i915_gem_clflush_object(obj, false); - - flush_domains |= obj->base.write_domain; + i915_gem_clflush_object(obj, false); } - if (flush_chipset) - i915_gem_chipset_flush(req->engine->i915); - - if (flush_domains & I915_GEM_DOMAIN_GTT) - wmb(); + /* Unconditionally flush any chipset caches (for streaming writes). */ + i915_gem_chipset_flush(req->engine->i915); /* Unconditionally invalidate gpu caches and ensure that we do flush * any residual writes from the previous batch. -- cgit v1.3-18-gd494 From 0184c2fff11705d0041c61356c57eac2e033c686 Mon Sep 17 00:00:00 2001 From: Dave Gordon Date: Fri, 19 Aug 2016 15:23:42 +0100 Subject: drm/i915: Reattach comment, complete type specification In the recent patch bc3d674 drm/i915: Allow userspace to request no-error-capture upon ... the final version moved the flags and the associated #defines around so they were adjacent; unfortunately, they ended up between a comment and the thing (hw_id) to which the comment applies :( So this patch reshuffles the comment and subject back together. Also, as we're touching 'hw_id', let's change it from just 'unsigned' to a fully-specified 'unsigned int', because some code checking tools (including checkpatch) object to plain 'unsigned'. Fixes: bc3d674462e5 ("drm/i915: Allow userspace to request no-error-capture...") Signed-off-by: Dave Gordon Cc: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1471616622-6919-1-git-send-email-david.s.gordon@intel.com Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson (cherry picked from commit 0be81156b3fb4d4e8e2c94177e5222dc21c3ff10) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 3ca674e9c105..46e372ece6eb 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -882,11 +882,12 @@ struct i915_gem_context { struct i915_ctx_hang_stats hang_stats; - /* Unique identifier for this context, used by the hw for tracking */ unsigned long flags; #define CONTEXT_NO_ZEROMAP BIT(0) #define CONTEXT_NO_ERROR_CAPTURE BIT(1) - unsigned hw_id; + + /* Unique identifier for this context, used by the hw for tracking */ + unsigned int hw_id; u32 user_handle; u32 ggtt_alignment; -- cgit v1.3-18-gd494 From 5bc6abe7674d9cf41dbcdaaf98a19184da181439 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 17 Aug 2016 15:55:53 -0400 Subject: drm/i915/gen6+: Interpret mailbox error flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to add proper support for the SAGV, we need to be able to know what the cause of a failure to change the SAGV through the pcode mailbox was. The reasoning for this is that some very early pre-release Skylake machines don't actually allow you to control the SAGV on them, and indicate an invalid mailbox command was sent. This also might come in handy in the future for debugging. Changes since v1: - Add functions for interpreting gen6 mailbox error codes along with gen7+ error codes, and actually interpret those codes properly - Renamed patch to reflect new behavior Signed-off-by: Lyude Cc: Matt Roper Cc: Maarten Lankhorst Cc: Daniel Vetter Cc: Ville Syrjälä Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-2-git-send-email-cpaul@redhat.com [mlankhorst: -ENOSYS -> -ENXIO for checkpatch] (cherry picked from commit 87660502f1a4d51fb043e89a45d30c9917787c22) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 9 ++++++ drivers/gpu/drm/i915/intel_pm.c | 71 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 79 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5c06413ae0e6..2b9508dda759 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7145,6 +7145,15 @@ enum { #define GEN6_PCODE_MAILBOX _MMIO(0x138124) #define GEN6_PCODE_READY (1<<31) +#define GEN6_PCODE_ERROR_MASK 0xFF +#define GEN6_PCODE_SUCCESS 0x0 +#define GEN6_PCODE_ILLEGAL_CMD 0x1 +#define GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x2 +#define GEN6_PCODE_TIMEOUT 0x3 +#define GEN6_PCODE_UNIMPLEMENTED_CMD 0xFF +#define GEN7_PCODE_TIMEOUT 0x2 +#define GEN7_PCODE_ILLEGAL_DATA 0x3 +#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10 #define GEN6_PCODE_WRITE_RC6VIDS 0x4 #define GEN6_PCODE_READ_RC6VIDS 0x5 #define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 421c5b72464a..2c88c2f50d02 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -7671,8 +7671,53 @@ void intel_init_pm(struct drm_device *dev) } } +static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv) +{ + uint32_t flags = + I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK; + + switch (flags) { + case GEN6_PCODE_SUCCESS: + return 0; + case GEN6_PCODE_UNIMPLEMENTED_CMD: + case GEN6_PCODE_ILLEGAL_CMD: + return -ENXIO; + case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: + return -EOVERFLOW; + case GEN6_PCODE_TIMEOUT: + return -ETIMEDOUT; + default: + MISSING_CASE(flags) + return 0; + } +} + +static inline int gen7_check_mailbox_status(struct drm_i915_private *dev_priv) +{ + uint32_t flags = + I915_READ_FW(GEN6_PCODE_MAILBOX) & GEN6_PCODE_ERROR_MASK; + + switch (flags) { + case GEN6_PCODE_SUCCESS: + return 0; + case GEN6_PCODE_ILLEGAL_CMD: + return -ENXIO; + case GEN7_PCODE_TIMEOUT: + return -ETIMEDOUT; + case GEN7_PCODE_ILLEGAL_DATA: + return -EINVAL; + case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: + return -EOVERFLOW; + default: + MISSING_CASE(flags); + return 0; + } +} + int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val) { + int status; + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); /* GEN6_PCODE_* are outside of the forcewake domain, we can @@ -7699,12 +7744,25 @@ int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val *val = I915_READ_FW(GEN6_PCODE_DATA); I915_WRITE_FW(GEN6_PCODE_DATA, 0); + if (INTEL_GEN(dev_priv) > 6) + status = gen7_check_mailbox_status(dev_priv); + else + status = gen6_check_mailbox_status(dev_priv); + + if (status) { + DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed: %d\n", + status); + return status; + } + return 0; } int sandybridge_pcode_write(struct drm_i915_private *dev_priv, - u32 mbox, u32 val) + u32 mbox, u32 val) { + int status; + WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock)); /* GEN6_PCODE_* are outside of the forcewake domain, we can @@ -7729,6 +7787,17 @@ int sandybridge_pcode_write(struct drm_i915_private *dev_priv, I915_WRITE_FW(GEN6_PCODE_DATA, 0); + if (INTEL_GEN(dev_priv) > 6) + status = gen7_check_mailbox_status(dev_priv); + else + status = gen6_check_mailbox_status(dev_priv); + + if (status) { + DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed: %d\n", + status); + return status; + } + return 0; } -- cgit v1.3-18-gd494 From f403372658fc7b652a77885a4141e58e57d9c75a Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 17 Aug 2016 15:55:54 -0400 Subject: drm/i915/skl: Add support for the SAGV, fix underrun hangs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since the watermark calculations for Skylake are still broken, we're apt to hitting underruns very easily under multi-monitor configurations. While it would be lovely if this was fixed, it's not. Another problem that's been coming from this however, is the mysterious issue of underruns causing full system hangs. An easy way to reproduce this with a skylake system: - Get a laptop with a skylake GPU, and hook up two external monitors to it - Move the cursor from the built-in LCD to one of the external displays as quickly as you can - You'll get a few pipe underruns, and eventually the entire system will just freeze. After doing a lot of investigation and reading through the bspec, I found the existence of the SAGV, which is responsible for adjusting the system agent voltage and clock frequencies depending on how much power we need. According to the bspec: "The display engine access to system memory is blocked during the adjustment time. SAGV defaults to enabled. Software must use the GT-driver pcode mailbox to disable SAGV when the display engine is not able to tolerate the blocking time." The rest of the bspec goes on to explain that software can simply leave the SAGV enabled, and disable it when we use interlaced pipes/have more then one pipe active. Sure enough, with this patchset the system hangs resulting from pipe underruns on Skylake have completely vanished on my T460s. Additionally, the bspec mentions turning off the SAGV with more then one pipe enabled as a workaround for display underruns. While this patch doesn't entirely fix that, it looks like it does improve the situation a little bit so it's likely this is going to be required to make watermarks on Skylake fully functional. This will still need additional work in the future: we shouldn't be enabling the SAGV if any of the currently enabled planes can't enable WM levels that introduce latencies >= 30 µs. Changes since v11: - Add skl_can_enable_sagv() - Make sure we don't enable SAGV when not all planes can enable watermarks >= the SAGV engine block time. I was originally going to save this for later, but I recently managed to run into a machine that was having problems with a single pipe configuration + SAGV. - Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit - Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE - Move printks outside of mutexes - Don't print error messages twice Changes since v10: - Apparently sandybridge_pcode_read actually writes values and reads them back, despite it's misleading function name. This means we've been doing this mostly wrong and have been writing garbage to the SAGV control. Because of this, we no longer attempt to read the SAGV status during initialization (since there are no helpers for this). - mlankhorst noticed that this patch was breaking on some very early pre-release Skylake machines, which apparently don't allow you to disable the SAGV. To prevent machines from failing tests due to SAGV errors, if the first time we try to control the SAGV results in the mailbox indicating an invalid command, we just disable future attempts to control the SAGV state by setting dev_priv->skl_sagv_status to I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg. - Move mutex_unlock() a little higher in skl_enable_sagv(). This doesn't actually fix anything, but lets us release the lock a little sooner since we're finished with it. Changes since v9: - Only enable/disable sagv on Skylake Changes since v8: - Add intel_state->modeset guard to the conditional for skl_enable_sagv() Changes since v7: - Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's all we use it for anyway) - Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification - Fix a styling error that snuck past me Changes since v6: - Protect skl_enable_sagv() with intel_state->modeset conditional in intel_atomic_commit_tail() Changes since v5: - Don't use is_power_of_2. Makes things confusing - Don't use the old state to figure out whether or not to enable/disable the sagv, use the new one - Split the loop in skl_disable_sagv into it's own function - Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail() Changes since v4: - Use is_power_of_2 against active_crtcs to check whether we have > 1 pipe enabled - Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0 enabled - Call skl_sagv_enable/disable() from pre/post-plane updates Changes since v3: - Use time_before() to compare timeout to jiffies Changes since v2: - Really apply minor style nitpicks to patch this time Changes since v1: - Added comments about this probably being one of the requirements to fixing Skylake's watermark issues - Minor style nitpicks from Matt Roper - Disable these functions on Broxton, since it doesn't have an SAGV Signed-off-by: Lyude Cc: Matt Roper Cc: Maarten Lankhorst Cc: Daniel Vetter Cc: Ville Syrjälä Cc: stable@vger.kernel.org Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com [mlankhorst: ENOSYS -> ENXIO, whitespace fixes] (cherry picked from commit 656d1b89e5ffb83036ab0e2a24be7558f34365c7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 7 ++ drivers/gpu/drm/i915/i915_reg.h | 4 + drivers/gpu/drm/i915/intel_display.c | 11 +++ drivers/gpu/drm/i915/intel_drv.h | 3 + drivers/gpu/drm/i915/intel_pm.c | 148 +++++++++++++++++++++++++++++++++++ 5 files changed, 173 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 46e372ece6eb..f68c78918d63 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1964,6 +1964,13 @@ struct drm_i915_private { struct i915_suspend_saved_registers regfile; struct vlv_s0ix_state vlv_s0ix_state; + enum { + I915_SKL_SAGV_UNKNOWN = 0, + I915_SKL_SAGV_DISABLED, + I915_SKL_SAGV_ENABLED, + I915_SKL_SAGV_NOT_CONTROLLED + } skl_sagv_status; + struct { /* * Raw watermark latency values: diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2b9508dda759..bf2cad3f9e1f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7175,6 +7175,10 @@ enum { #define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17 #define DISPLAY_IPS_CONTROL 0x19 #define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A +#define GEN9_PCODE_SAGV_CONTROL 0x21 +#define GEN9_SAGV_DISABLE 0x0 +#define GEN9_SAGV_IS_DISABLED 0x1 +#define GEN9_SAGV_ENABLE 0x3 #define GEN6_PCODE_DATA _MMIO(0x138128) #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2a751b6e0253..175595fc3e45 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13759,6 +13759,13 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_state->cdclk_pll_vco != dev_priv->cdclk_pll.vco)) dev_priv->display.modeset_commit_cdclk(state); + /* + * SKL workaround: bspec recommends we disable the SAGV when we + * have more then one pipe enabled + */ + if (IS_SKYLAKE(dev_priv) && !skl_can_enable_sagv(state)) + skl_disable_sagv(dev_priv); + intel_modeset_verify_disabled(dev); } @@ -13832,6 +13839,10 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) intel_modeset_verify_crtc(crtc, old_crtc_state, crtc->state); } + if (IS_SKYLAKE(dev_priv) && intel_state->modeset && + skl_can_enable_sagv(state)) + skl_enable_sagv(dev_priv); + drm_atomic_helper_commit_hw_done(state); if (intel_state->modeset) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cc937a19b1ba..ff399b9a5c1f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1716,6 +1716,9 @@ void ilk_wm_get_hw_state(struct drm_device *dev); void skl_wm_get_hw_state(struct drm_device *dev); void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv, struct skl_ddb_allocation *ddb /* out */); +bool skl_can_enable_sagv(struct drm_atomic_state *state); +int skl_enable_sagv(struct drm_i915_private *dev_priv); +int skl_disable_sagv(struct drm_i915_private *dev_priv); uint32_t ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config); bool ilk_disable_lp_wm(struct drm_device *dev); int sanitize_rc6_option(struct drm_i915_private *dev_priv, int enable_rc6); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 2c88c2f50d02..496a911e5668 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2852,6 +2852,7 @@ bool ilk_disable_lp_wm(struct drm_device *dev) #define SKL_DDB_SIZE 896 /* in blocks */ #define BXT_DDB_SIZE 512 +#define SKL_SAGV_BLOCK_TIME 30 /* µs */ /* * Return the index of a plane in the SKL DDB and wm result arrays. Primary @@ -2875,6 +2876,153 @@ skl_wm_plane_id(const struct intel_plane *plane) } } +/* + * SAGV dynamically adjusts the system agent voltage and clock frequencies + * depending on power and performance requirements. The display engine access + * to system memory is blocked during the adjustment time. Because of the + * blocking time, having this enabled can cause full system hangs and/or pipe + * underruns if we don't meet all of the following requirements: + * + * - <= 1 pipe enabled + * - All planes can enable watermarks for latencies >= SAGV engine block time + * - We're not using an interlaced display configuration + */ +int +skl_enable_sagv(struct drm_i915_private *dev_priv) +{ + int ret; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_ENABLED) + return 0; + + DRM_DEBUG_KMS("Enabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + ret = sandybridge_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL, + GEN9_SAGV_ENABLE); + + /* We don't need to wait for the SAGV when enabling */ + mutex_unlock(&dev_priv->rps.hw_lock); + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (ret == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (ret < 0) { + DRM_ERROR("Failed to enable the SAGV\n"); + return ret; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_ENABLED; + return 0; +} + +static int +skl_do_sagv_disable(struct drm_i915_private *dev_priv) +{ + int ret; + uint32_t temp = GEN9_SAGV_DISABLE; + + ret = sandybridge_pcode_read(dev_priv, GEN9_PCODE_SAGV_CONTROL, + &temp); + if (ret) + return ret; + else + return temp & GEN9_SAGV_IS_DISABLED; +} + +int +skl_disable_sagv(struct drm_i915_private *dev_priv) +{ + int ret, result; + + if (dev_priv->skl_sagv_status == I915_SKL_SAGV_NOT_CONTROLLED || + dev_priv->skl_sagv_status == I915_SKL_SAGV_DISABLED) + return 0; + + DRM_DEBUG_KMS("Disabling the SAGV\n"); + mutex_lock(&dev_priv->rps.hw_lock); + + /* bspec says to keep retrying for at least 1 ms */ + ret = wait_for(result = skl_do_sagv_disable(dev_priv), 1); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret == -ETIMEDOUT) { + DRM_ERROR("Request to disable SAGV timed out\n"); + return -ETIMEDOUT; + } + + /* + * Some skl systems, pre-release machines in particular, + * don't actually have an SAGV. + */ + if (result == -ENXIO) { + DRM_DEBUG_DRIVER("No SAGV found on system, ignoring\n"); + dev_priv->skl_sagv_status = I915_SKL_SAGV_NOT_CONTROLLED; + return 0; + } else if (result < 0) { + DRM_ERROR("Failed to disable the SAGV\n"); + return result; + } + + dev_priv->skl_sagv_status = I915_SKL_SAGV_DISABLED; + return 0; +} + +bool skl_can_enable_sagv(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_crtc *crtc; + enum pipe pipe; + int level, plane; + + /* + * SKL workaround: bspec recommends we disable the SAGV when we have + * more then one pipe enabled + * + * If there are no active CRTCs, no additional checks need be performed + */ + if (hweight32(intel_state->active_crtcs) == 0) + return true; + else if (hweight32(intel_state->active_crtcs) > 1) + return false; + + /* Since we're now guaranteed to only have one active CRTC... */ + pipe = ffs(intel_state->active_crtcs) - 1; + crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + + if (crtc->state->mode.flags & DRM_MODE_FLAG_INTERLACE) + return false; + + for_each_plane(dev_priv, pipe, plane) { + /* Skip this plane if it's not enabled */ + if (intel_state->wm_results.plane[pipe][plane][0] == 0) + continue; + + /* Find the highest enabled wm level for this plane */ + for (level = ilk_wm_max_level(dev); + intel_state->wm_results.plane[pipe][plane][level] == 0; --level) + { } + + /* + * If any of the planes on this pipe don't enable wm levels + * that incur memory latencies higher then 30µs we can't enable + * the SAGV + */ + if (dev_priv->wm.skl_latency[level] < SKL_SAGV_BLOCK_TIME) + return false; + } + + return true; +} + static void skl_ddb_get_pipe_allocation_limits(struct drm_device *dev, const struct intel_crtc_state *cstate, -- cgit v1.3-18-gd494 From 9909113cc48a7ce6e772573e3cc82a3f03ffa8ef Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Wed, 17 Aug 2016 15:55:55 -0400 Subject: drm/i915/gen9: Only copy WM results for changed pipes to skl_hw MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we write watermark values to the hardware, those values are stored in dev_priv->wm.skl_hw. However with recent watermark changes, the results structure we're copying from only contains valid watermark and DDB values for the pipes that are actually changing; the values for other pipes remain 0. Thus a blind copy of the entire skl_wm_values structure will clobber the values for unchanged pipes...we need to be more selective and only copy over the values for the changing pipes. This mistake was hidden until recently due to another bug that caused us to erroneously re-calculate watermarks for all active pipes rather than changing pipes. Only when that bug was fixed was the impact of this bug discovered (e.g., modesets failing with "Requested display configuration exceeds system watermark limitations" messages and leaving watermarks non-functional, even ones initiated by intel_fbdev_restore_mode). Changes since v1: - Add a function for copying a pipe's wm values (skl_copy_wm_for_pipe()) so we can reuse this later Fixes: 734fa01f3a17 ("drm/i915/gen9: Calculate watermarks during atomic 'check' (v2)") Fixes: 9b6130227495 ("drm/i915/gen9: Re-allocate DDB only for changed pipes") Signed-off-by: Matt Roper Signed-off-by: Lyude Reviewed-by: Matt Roper Cc: stable@vger.kernel.org Cc: Maarten Lankhorst Cc: Ville Syrjälä Cc: Daniel Vetter Cc: Radhakrishna Sripada Cc: Hans de Goede Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-4-git-send-email-cpaul@redhat.com (cherry picked from commit 2722efb90b3420dee54b4cb3cdc7917efacc2dce) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 496a911e5668..70dcf8d35568 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4109,6 +4109,24 @@ skl_compute_ddb(struct drm_atomic_state *state) return 0; } +static void +skl_copy_wm_for_pipe(struct skl_wm_values *dst, + struct skl_wm_values *src, + enum pipe pipe) +{ + dst->wm_linetime[pipe] = src->wm_linetime[pipe]; + memcpy(dst->plane[pipe], src->plane[pipe], + sizeof(dst->plane[pipe])); + memcpy(dst->plane_trans[pipe], src->plane_trans[pipe], + sizeof(dst->plane_trans[pipe])); + + dst->ddb.pipe[pipe] = src->ddb.pipe[pipe]; + memcpy(dst->ddb.y_plane[pipe], src->ddb.y_plane[pipe], + sizeof(dst->ddb.y_plane[pipe])); + memcpy(dst->ddb.plane[pipe], src->ddb.plane[pipe], + sizeof(dst->ddb.plane[pipe])); +} + static int skl_compute_wm(struct drm_atomic_state *state) { @@ -4181,8 +4199,10 @@ static void skl_update_wm(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct skl_wm_values *results = &dev_priv->wm.skl_results; + struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw; struct intel_crtc_state *cstate = to_intel_crtc_state(crtc->state); struct skl_pipe_wm *pipe_wm = &cstate->wm.skl.optimal; + int pipe; if ((results->dirty_pipes & drm_crtc_mask(crtc)) == 0) return; @@ -4194,8 +4214,12 @@ static void skl_update_wm(struct drm_crtc *crtc) skl_write_wm_values(dev_priv, results); skl_flush_wm_values(dev_priv, results); - /* store the new configuration */ - dev_priv->wm.skl_hw = *results; + /* + * Store the new configuration (but only for the pipes that have + * changed; the other values weren't recomputed). + */ + for_each_pipe_masked(dev_priv, pipe, results->dirty_pipes) + skl_copy_wm_for_pipe(hw_vals, results, pipe); mutex_unlock(&dev_priv->wm.wm_mutex); } -- cgit v1.3-18-gd494 From 762c60ab0257d25eea8db3e3fec85ed53b5330fe Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 17 Aug 2016 15:55:57 -0400 Subject: drm/i915/skl: Ensure pipes with changed wms get added to the state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we're enabling a pipe, we'll need to modify the watermarks on all active planes. Since those planes won't be added to the state on their own, we need to add them ourselves. Signed-off-by: Lyude Reviewed-by: Matt Roper Cc: stable@vger.kernel.org Cc: Ville Syrjälä Cc: Daniel Vetter Cc: Radhakrishna Sripada Cc: Hans de Goede Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-6-git-send-email-cpaul@redhat.com (cherry picked from commit 05a76d3d6ad1ee9f9814f88949cc9305fc165460) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 70dcf8d35568..53e13c10e4ea 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4104,6 +4104,10 @@ skl_compute_ddb(struct drm_atomic_state *state) ret = skl_allocate_pipe_ddb(cstate, ddb); if (ret) return ret; + + ret = drm_atomic_add_affected_planes(state, &intel_crtc->base); + if (ret) + return ret; } return 0; -- cgit v1.3-18-gd494 From 177d91aaea4bcafb29232336bafaa521b85286aa Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Mon, 15 Aug 2016 15:09:27 +0200 Subject: drm/i915: Fix botched merge that downgrades CSR versions. Merge commit 5e580523d9128a4d8 reverts the version bumping parts of commit 4aa7fb9c3c4fa0. Bump the versions again and request the specific firmware version. The currently recommended versions are: SKL 1.26, KBL 1.01 and BXT 1.07. Cc: Patrik Jakobsson Cc: Imre Deak Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97242 Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 5e580523d912 ("Backmerge tag 'v4.7' into drm-next") Signed-off-by: Maarten Lankhorst Link: http://patchwork.freedesktop.org/patch/msgid/1471266567-22443-1-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 536ab3ca19ef856e84389a155c5832c68559a28a) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_csr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c index 3edb9580928e..c3b33a10c15c 100644 --- a/drivers/gpu/drm/i915/intel_csr.c +++ b/drivers/gpu/drm/i915/intel_csr.c @@ -41,15 +41,15 @@ * be moved to FW_FAILED. */ -#define I915_CSR_KBL "i915/kbl_dmc_ver1.bin" +#define I915_CSR_KBL "i915/kbl_dmc_ver1_01.bin" MODULE_FIRMWARE(I915_CSR_KBL); #define KBL_CSR_VERSION_REQUIRED CSR_VERSION(1, 1) -#define I915_CSR_SKL "i915/skl_dmc_ver1.bin" +#define I915_CSR_SKL "i915/skl_dmc_ver1_26.bin" MODULE_FIRMWARE(I915_CSR_SKL); -#define SKL_CSR_VERSION_REQUIRED CSR_VERSION(1, 23) +#define SKL_CSR_VERSION_REQUIRED CSR_VERSION(1, 26) -#define I915_CSR_BXT "i915/bxt_dmc_ver1.bin" +#define I915_CSR_BXT "i915/bxt_dmc_ver1_07.bin" MODULE_FIRMWARE(I915_CSR_BXT); #define BXT_CSR_VERSION_REQUIRED CSR_VERSION(1, 7) -- cgit v1.3-18-gd494 From a32ac2912f97d7ea9b67eb67bb4aa30b9156a88e Mon Sep 17 00:00:00 2001 From: James Hartley Date: Fri, 19 Aug 2016 12:03:23 +0100 Subject: pinctrl: pistachio: fix mfio pll_lock pinmux A previous patch attempted to fix the pinmuxes for mfio 84 - 89, but it omitted a change to pistachio_pin_group pistachio_groups, which results in incorrect pll_lock signals being routed. Apply the correct mux settings throughout the driver. fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver") fixes: e9adb336d0bf ("pinctrl: pistachio: fix mfio84-89 function description and pinmux.") Cc: # 4.4.x- Signed-off-by: James Hartley Reviewed-by: Sifan Naeem Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-pistachio.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c index 7bad200bd67c..55375b1b3cc8 100644 --- a/drivers/pinctrl/pinctrl-pistachio.c +++ b/drivers/pinctrl/pinctrl-pistachio.c @@ -809,17 +809,17 @@ static const struct pistachio_pin_group pistachio_groups[] = { PADS_FUNCTION_SELECT2, 12, 0x3), MFIO_MUX_PIN_GROUP(83, MIPS_PLL_LOCK, MIPS_TRACE_DATA, USB_DEBUG, PADS_FUNCTION_SELECT2, 14, 0x3), - MFIO_MUX_PIN_GROUP(84, SYS_PLL_LOCK, MIPS_TRACE_DATA, USB_DEBUG, + MFIO_MUX_PIN_GROUP(84, AUDIO_PLL_LOCK, MIPS_TRACE_DATA, USB_DEBUG, PADS_FUNCTION_SELECT2, 16, 0x3), - MFIO_MUX_PIN_GROUP(85, WIFI_PLL_LOCK, MIPS_TRACE_DATA, SDHOST_DEBUG, + MFIO_MUX_PIN_GROUP(85, RPU_V_PLL_LOCK, MIPS_TRACE_DATA, SDHOST_DEBUG, PADS_FUNCTION_SELECT2, 18, 0x3), - MFIO_MUX_PIN_GROUP(86, BT_PLL_LOCK, MIPS_TRACE_DATA, SDHOST_DEBUG, + MFIO_MUX_PIN_GROUP(86, RPU_L_PLL_LOCK, MIPS_TRACE_DATA, SDHOST_DEBUG, PADS_FUNCTION_SELECT2, 20, 0x3), - MFIO_MUX_PIN_GROUP(87, RPU_V_PLL_LOCK, DREQ2, SOCIF_DEBUG, + MFIO_MUX_PIN_GROUP(87, SYS_PLL_LOCK, DREQ2, SOCIF_DEBUG, PADS_FUNCTION_SELECT2, 22, 0x3), - MFIO_MUX_PIN_GROUP(88, RPU_L_PLL_LOCK, DREQ3, SOCIF_DEBUG, + MFIO_MUX_PIN_GROUP(88, WIFI_PLL_LOCK, DREQ3, SOCIF_DEBUG, PADS_FUNCTION_SELECT2, 24, 0x3), - MFIO_MUX_PIN_GROUP(89, AUDIO_PLL_LOCK, DREQ4, DREQ5, + MFIO_MUX_PIN_GROUP(89, BT_PLL_LOCK, DREQ4, DREQ5, PADS_FUNCTION_SELECT2, 26, 0x3), PIN_GROUP(TCK, "tck"), PIN_GROUP(TRSTN, "trstn"), -- cgit v1.3-18-gd494 From bcb48cca23ec9852739e4a464307fa29515bbe48 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 22 Aug 2016 14:42:52 +0300 Subject: pinctrl: cherryview: Do not mask all interrupts in probe The Cherryview GPIO controller has 8 or 16 wires connected to the I/O-APIC which can be used directly by the platform/BIOS or drivers. One such wire is used as SCI (System Control Interrupt) which ACPI depends on to be able to trigger GPEs (General Purpose Events). The pinctrl driver itself uses another IRQ resource which is wire OR of all the 8 (or 16) wires and follows what BIOS has programmed to the IntSel register of each pin. Currently the driver masks all interrupts at probe time and this prevents these direct interrupts from working as expected. The reason for this is that some early stage prototypes had some pins misconfigured causing lots of spurious interrupts. We fix this by leaving the interrupt mask untouched. This allows SCI and other direct interrupts work properly. What comes to the possible spurious interrupts we switch the default handler to be handle_bad_irq() instead of handle_simple_irq() (which was not correct anyway). Reported-by: Yu C Chen Reported-by: Anisse Astier Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 5749a4eee746..0fe8fad25e4d 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1539,12 +1539,11 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq) offset += range->npins; } - /* Mask and clear all interrupts */ - chv_writel(0, pctrl->regs + CHV_INTMASK); + /* Clear all interrupts */ chv_writel(0xffff, pctrl->regs + CHV_INTSTAT); ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0, - handle_simple_irq, IRQ_TYPE_NONE); + handle_bad_irq, IRQ_TYPE_NONE); if (ret) { dev_err(pctrl->dev, "failed to add IRQ chip\n"); goto fail; -- cgit v1.3-18-gd494 From 05860bed491b114a9f2d7a4f6e09fb02c0b69056 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 19 Aug 2016 13:37:38 +0300 Subject: ath9k: fix client mode beacon configuration For pure station mode, iter_data.primary_beacon_vif was used and passed to ath_beacon_config, but not set to the station vif. This was causing the following warning: [ 100.310919] ------------[ cut here ]------------ [ 100.315683] WARNING: CPU: 0 PID: 7 at compat-wireless-2016-06-20/drivers/net/wireless/ath/ath9k/beacon.c:642 ath9k_calculate_summary_state+0x250/0x60c [ath9k]() [ 100.402028] CPU: 0 PID: 7 Comm: kworker/u2:1 Tainted: G W 4.4.15 #5 [ 100.409676] Workqueue: phy0 ieee80211_ibss_leave [mac80211] [ 100.415351] Stack : 8736e98c 870b4b20 87a25b54 800a6800 8782a080 80400d63 8039b96c 00000007 [ 100.415351] 803c5edc 87875914 80400000 800a47cc 87a25b54 800a6800 803a0fd8 80400000 [ 100.415351] 00000003 87875914 80400000 80094ae0 87a25b54 8787594c 00000000 801ef308 [ 100.415351] 803ffe70 801ef300 87193d58 87b3a400 87b3ad00 70687930 00000000 00000000 [ 100.415351] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 100.415351] ... [ 100.451703] Call Trace: [ 100.454235] [<800a6800>] vprintk_default+0x24/0x30 [ 100.459110] [<800a47cc>] printk+0x2c/0x38 [ 100.463190] [<800a6800>] vprintk_default+0x24/0x30 [ 100.468072] [<80094ae0>] print_worker_info+0x148/0x174 [ 100.473378] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.479122] [<801ef300>] wait_for_xmitr+0xc4/0xcc [ 100.484014] [<87193d58>] ieee80211_ibss_leave+0xb90/0x1900 [mac80211] [ 100.490590] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.495922] [<801a359c>] dump_stack+0x14/0x28 [ 100.500350] [<80071a00>] show_stack+0x50/0x84 [ 100.504784] [<80081604>] warn_slowpath_common+0xa0/0xd0 [ 100.510106] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.517105] [<800816b8>] warn_slowpath_null+0x18/0x24 [ 100.522256] [<87024c60>] ath9k_calculate_summary_state+0x250/0x60c [ath9k] [ 100.529273] [<87025418>] ath9k_set_txpower+0x148/0x498 [ath9k] [ 100.535302] [<871d2c64>] cleanup_module+0xa74/0xd4c [mac80211] [ 100.541237] [<801ef308>] serial8250_console_putchar+0x0/0x44 [ 100.547042] [<800a5d18>] wake_up_klogd+0x54/0x68 [ 100.551730] [<800a6650>] vprintk_emit+0x404/0x43c [ 100.556623] [<871b9db8>] ieee80211_sta_rx_notify+0x258/0x32c [mac80211] [ 100.563475] [<871ba6a4>] ieee80211_sta_rx_queued_mgmt+0x63c/0x734 [mac80211] [ 100.570693] [<871aa49c>] ieee80211_tx_prepare_skb+0x210/0x230 [mac80211] [ 100.577609] [<800af5d4>] mod_timer+0x15c/0x190 [ 100.582220] [<871ba8b8>] ieee80211_sta_work+0xfc/0xe1c [mac80211] [ 100.588539] [<871940b4>] ieee80211_ibss_leave+0xeec/0x1900 [mac80211] [ 100.595122] [<8009ec84>] dequeue_task_fair+0x44/0x130 [ 100.600281] [<80092a34>] process_one_work+0x1f8/0x334 [ 100.605454] [<80093830>] worker_thread+0x2b4/0x408 [ 100.610317] [<8009357c>] worker_thread+0x0/0x408 [ 100.615019] [<8009357c>] worker_thread+0x0/0x408 [ 100.619705] [<80097b68>] kthread+0xdc/0xe8 [ 100.623886] [<80097a8c>] kthread+0x0/0xe8 [ 100.627961] [<80060878>] ret_from_kernel_thread+0x14/0x1c [ 100.633448] [ 100.634956] ---[ end trace aafbe57e9ae6862f ]--- Fixes: cfda2d8e2314 ("ath9k: Fix beacon configuration for addition/removal of interfaces") Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a394622c9022..098745dc683b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1154,6 +1154,7 @@ void ath9k_calculate_summary_state(struct ath_softc *sc, bool changed = (iter_data.primary_sta != ctx->primary_sta); if (iter_data.primary_sta) { + iter_data.primary_beacon_vif = iter_data.primary_sta; iter_data.beacons = true; ath9k_set_assoc_state(sc, iter_data.primary_sta, changed); -- cgit v1.3-18-gd494 From 7711aaf08ad3fc4d0e937eec1de0a63620444ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 19 Aug 2016 13:37:46 +0300 Subject: ath9k: fix using sta->drv_priv before initializing it A station pointer can be passed to the driver on tx, before it has been marked as associated. Since ath9k_sta_state was initializing the entry too late, it resulted in some spurious crashes. Fixes: df3c6eb34da5 ("ath9k: Use sta_state() callback") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 098745dc683b..6ca4337a98c4 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1564,13 +1564,13 @@ static int ath9k_sta_state(struct ieee80211_hw *hw, struct ath_common *common = ath9k_hw_common(sc->sc_ah); int ret = 0; - if (old_state == IEEE80211_STA_AUTH && - new_state == IEEE80211_STA_ASSOC) { + if (old_state == IEEE80211_STA_NOTEXIST && + new_state == IEEE80211_STA_NONE) { ret = ath9k_sta_add(hw, vif, sta); ath_dbg(common, CONFIG, "Add station: %pM\n", sta->addr); - } else if (old_state == IEEE80211_STA_ASSOC && - new_state == IEEE80211_STA_AUTH) { + } else if (old_state == IEEE80211_STA_NONE && + new_state == IEEE80211_STA_NOTEXIST) { ret = ath9k_sta_remove(hw, vif, sta); ath_dbg(common, CONFIG, "Remove station: %pM\n", sta->addr); -- cgit v1.3-18-gd494 From 62148f0930a8e9bd5c5614f8387222f0220d7d47 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 2 Aug 2016 08:11:00 -0300 Subject: [media] cec: rename cec_devnode fhs_lock to just lock This lock will be used to protect more than just the fhs list. So rename it to just 'lock'. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-adap.c | 12 ++++++------ drivers/staging/media/cec/cec-api.c | 8 ++++---- drivers/staging/media/cec/cec-core.c | 6 +++--- include/media/cec.h | 2 +- 4 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/staging/media/cec/cec-adap.c index b2393bbacb26..9dcb784b8d6a 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/staging/media/cec/cec-adap.c @@ -124,10 +124,10 @@ static void cec_queue_event(struct cec_adapter *adap, u64 ts = ktime_get_ns(); struct cec_fh *fh; - mutex_lock(&adap->devnode.fhs_lock); + mutex_lock(&adap->devnode.lock); list_for_each_entry(fh, &adap->devnode.fhs, list) cec_queue_event_fh(fh, ev, ts); - mutex_unlock(&adap->devnode.fhs_lock); + mutex_unlock(&adap->devnode.lock); } /* @@ -191,12 +191,12 @@ static void cec_queue_msg_monitor(struct cec_adapter *adap, u32 monitor_mode = valid_la ? CEC_MODE_MONITOR : CEC_MODE_MONITOR_ALL; - mutex_lock(&adap->devnode.fhs_lock); + mutex_lock(&adap->devnode.lock); list_for_each_entry(fh, &adap->devnode.fhs, list) { if (fh->mode_follower >= monitor_mode) cec_queue_msg_fh(fh, msg); } - mutex_unlock(&adap->devnode.fhs_lock); + mutex_unlock(&adap->devnode.lock); } /* @@ -207,12 +207,12 @@ static void cec_queue_msg_followers(struct cec_adapter *adap, { struct cec_fh *fh; - mutex_lock(&adap->devnode.fhs_lock); + mutex_lock(&adap->devnode.lock); list_for_each_entry(fh, &adap->devnode.fhs, list) { if (fh->mode_follower == CEC_MODE_FOLLOWER) cec_queue_msg_fh(fh, msg); } - mutex_unlock(&adap->devnode.fhs_lock); + mutex_unlock(&adap->devnode.lock); } /* Notify userspace of an adapter state change. */ diff --git a/drivers/staging/media/cec/cec-api.c b/drivers/staging/media/cec/cec-api.c index 7be7615a0fdf..4e2696a34ddb 100644 --- a/drivers/staging/media/cec/cec-api.c +++ b/drivers/staging/media/cec/cec-api.c @@ -508,14 +508,14 @@ static int cec_open(struct inode *inode, struct file *filp) filp->private_data = fh; - mutex_lock(&devnode->fhs_lock); + mutex_lock(&devnode->lock); /* Queue up initial state events */ ev_state.state_change.phys_addr = adap->phys_addr; ev_state.state_change.log_addr_mask = adap->log_addrs.log_addr_mask; cec_queue_event_fh(fh, &ev_state, 0); list_add(&fh->list, &devnode->fhs); - mutex_unlock(&devnode->fhs_lock); + mutex_unlock(&devnode->lock); return 0; } @@ -540,9 +540,9 @@ static int cec_release(struct inode *inode, struct file *filp) cec_monitor_all_cnt_dec(adap); mutex_unlock(&adap->lock); - mutex_lock(&devnode->fhs_lock); + mutex_lock(&devnode->lock); list_del(&fh->list); - mutex_unlock(&devnode->fhs_lock); + mutex_unlock(&devnode->lock); /* Unhook pending transmits from this filehandle. */ mutex_lock(&adap->lock); diff --git a/drivers/staging/media/cec/cec-core.c b/drivers/staging/media/cec/cec-core.c index 112a5fae12f5..73792d078462 100644 --- a/drivers/staging/media/cec/cec-core.c +++ b/drivers/staging/media/cec/cec-core.c @@ -117,7 +117,7 @@ static int __must_check cec_devnode_register(struct cec_devnode *devnode, /* Initialization */ INIT_LIST_HEAD(&devnode->fhs); - mutex_init(&devnode->fhs_lock); + mutex_init(&devnode->lock); /* Part 1: Find a free minor number */ mutex_lock(&cec_devnode_lock); @@ -181,10 +181,10 @@ static void cec_devnode_unregister(struct cec_devnode *devnode) if (!devnode->registered || devnode->unregistered) return; - mutex_lock(&devnode->fhs_lock); + mutex_lock(&devnode->lock); list_for_each_entry(fh, &devnode->fhs, list) wake_up_interruptible(&fh->wait); - mutex_unlock(&devnode->fhs_lock); + mutex_unlock(&devnode->lock); devnode->registered = false; devnode->unregistered = true; diff --git a/include/media/cec.h b/include/media/cec.h index dc7854b855f3..fdb5d600e4bb 100644 --- a/include/media/cec.h +++ b/include/media/cec.h @@ -57,8 +57,8 @@ struct cec_devnode { int minor; bool registered; bool unregistered; - struct mutex fhs_lock; struct list_head fhs; + struct mutex lock; }; struct cec_adapter; -- cgit v1.3-18-gd494 From 2ab25d35a91098ef0f42d478cc37f6a5591a4ab0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 2 Aug 2016 08:13:57 -0300 Subject: [media] cec: improve locking - The global lock was used in cec_get_device when it should have used the devnode lock. - cec_put_device also took the global lock, but since the release function takes that lock as well this could lead to a deadlock. Just don't take the lock here since there is no reason for it. - cec_devnode_register() should take the global lock when clearing the bit in the global bitmap. - In cec_devnode_unregister() place the devnode->(un)register tests and assignments under the devnode lock as well: this has to be in a critical block. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-core.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-core.c b/drivers/staging/media/cec/cec-core.c index 73792d078462..3b1e4d2b190d 100644 --- a/drivers/staging/media/cec/cec-core.c +++ b/drivers/staging/media/cec/cec-core.c @@ -51,31 +51,29 @@ int cec_get_device(struct cec_devnode *devnode) { /* * Check if the cec device is available. This needs to be done with - * the cec_devnode_lock held to prevent an open/unregister race: + * the devnode->lock held to prevent an open/unregister race: * without the lock, the device could be unregistered and freed between * the devnode->registered check and get_device() calls, leading to * a crash. */ - mutex_lock(&cec_devnode_lock); + mutex_lock(&devnode->lock); /* * return ENXIO if the cec device has been removed * already or if it is not registered anymore. */ if (!devnode->registered) { - mutex_unlock(&cec_devnode_lock); + mutex_unlock(&devnode->lock); return -ENXIO; } /* and increase the device refcount */ get_device(&devnode->dev); - mutex_unlock(&cec_devnode_lock); + mutex_unlock(&devnode->lock); return 0; } void cec_put_device(struct cec_devnode *devnode) { - mutex_lock(&cec_devnode_lock); put_device(&devnode->dev); - mutex_unlock(&cec_devnode_lock); } /* Called when the last user of the cec device exits. */ @@ -84,11 +82,10 @@ static void cec_devnode_release(struct device *cd) struct cec_devnode *devnode = to_cec_devnode(cd); mutex_lock(&cec_devnode_lock); - /* Mark device node number as free */ clear_bit(devnode->minor, cec_devnode_nums); - mutex_unlock(&cec_devnode_lock); + cec_delete_adapter(to_cec_adapter(devnode)); } @@ -160,7 +157,9 @@ static int __must_check cec_devnode_register(struct cec_devnode *devnode, cdev_del: cdev_del(&devnode->cdev); clr_bit: + mutex_lock(&cec_devnode_lock); clear_bit(devnode->minor, cec_devnode_nums); + mutex_unlock(&cec_devnode_lock); return ret; } @@ -177,17 +176,21 @@ static void cec_devnode_unregister(struct cec_devnode *devnode) { struct cec_fh *fh; + mutex_lock(&devnode->lock); + /* Check if devnode was never registered or already unregistered */ - if (!devnode->registered || devnode->unregistered) + if (!devnode->registered || devnode->unregistered) { + mutex_unlock(&devnode->lock); return; + } - mutex_lock(&devnode->lock); list_for_each_entry(fh, &devnode->fhs, list) wake_up_interruptible(&fh->wait); - mutex_unlock(&devnode->lock); devnode->registered = false; devnode->unregistered = true; + mutex_unlock(&devnode->lock); + device_del(&devnode->dev); cdev_del(&devnode->cdev); put_device(&devnode->dev); -- cgit v1.3-18-gd494 From 6a33fa2b87513fee44cb8f0cd17b1acd6316bc6b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 19 Aug 2016 18:07:14 +0100 Subject: irqchip/mips-gic: Cleanup chip and handler setup gic_shared_irq_domain_map() is called from gic_irq_domain_alloc() where the wrong chip has been set, and is then overwritten. Tidy this up by setting the correct chip the first time, and setting the handle_level_irq handler from gic_irq_domain_alloc() too. gic_shared_irq_domain_map() is also called from gic_irq_domain_map(), which now calls irq_set_chip_and_handler() to retain its previous behaviour. This patch prepares for a follow-on which will call gic_shared_irq_domain_map() from a callback where the lock on the struct irq_desc is held, which without this change would cause the call to irq_set_chip_and_handler() to lead to a deadlock. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Marc Zyngier Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160819170715.27820-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mips-gic.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index c5f33c3bd228..2e0f49992a98 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -713,9 +713,6 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq, unsigned long flags; int i; - irq_set_chip_and_handler(virq, &gic_level_irq_controller, - handle_level_irq); - spin_lock_irqsave(&gic_lock, flags); gic_map_to_pin(intr, gic_cpu_pin); gic_map_to_vpe(intr, mips_cm_vp_id(vpe)); @@ -732,6 +729,10 @@ static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq, { if (GIC_HWIRQ_TO_LOCAL(hw) < GIC_NUM_LOCAL_INTRS) return gic_local_irq_domain_map(d, virq, hw); + + irq_set_chip_and_handler(virq, &gic_level_irq_controller, + handle_level_irq); + return gic_shared_irq_domain_map(d, virq, hw, 0); } @@ -771,11 +772,13 @@ static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq, hwirq = GIC_SHARED_TO_HWIRQ(base_hwirq + i); ret = irq_domain_set_hwirq_and_chip(d, virq + i, hwirq, - &gic_edge_irq_controller, + &gic_level_irq_controller, NULL); if (ret) goto error; + irq_set_handler(virq + i, handle_level_irq); + ret = gic_shared_irq_domain_map(d, virq + i, hwirq, cpu); if (ret) goto error; -- cgit v1.3-18-gd494 From 2564970a381651865364974ea414384b569cb9c0 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 19 Aug 2016 18:07:15 +0100 Subject: irqchip/mips-gic: Implement activate op for device domain If an IRQ is setup using __setup_irq(), which is used by the request_irq() family of functions, and we are using an SMP kernel then the affinity of the IRQ will be set via setup_affinity() immediately after the IRQ is enabled. This call to gic_set_affinity() will lead to the interrupt being mapped to a VPE. However there are other ways to use IRQs which don't cause affinity to be set, for example if it is used to chain to another IRQ controller with irq_set_chained_handler_and_data(). The irq_set_chained_handler_and_data() code path will enable the IRQ, but will not trigger a call to gic_set_affinity() and in this case nothing will map the interrupt to a VPE, meaning that the interrupt is never received. Fix this by implementing the activate operation for the GIC device IRQ domain, using gic_shared_irq_domain_map() to map the interrupt to the correct pin of cpu 0. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Marc Zyngier Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160819170715.27820-2-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mips-gic.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 2e0f49992a98..83f498393a7f 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -893,10 +893,17 @@ void gic_dev_domain_free(struct irq_domain *d, unsigned int virq, return; } +static void gic_dev_domain_activate(struct irq_domain *domain, + struct irq_data *d) +{ + gic_shared_irq_domain_map(domain, d->irq, d->hwirq, 0); +} + static struct irq_domain_ops gic_dev_domain_ops = { .xlate = gic_dev_domain_xlate, .alloc = gic_dev_domain_alloc, .free = gic_dev_domain_free, + .activate = gic_dev_domain_activate, }; static int gic_ipi_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, -- cgit v1.3-18-gd494 From dcceb1eaf210096831b14471bc87678375b086ed Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 10 Aug 2016 09:24:45 -0300 Subject: [media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag Currently if none of the requested logical addresses can be claimed, the framework will fall back to the Unregistered logical address. Add a flag to enable this explicitly. By default it will just go back to the unconfigured state. Usually Unregistered is not something you want since the functionality is very limited. Unless the application has support for this, it will fail to work correctly. So require that the application explicitly requests this. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../media/uapi/cec/cec-ioc-adap-g-log-addrs.rst | 21 ++++++++++++++++++++- drivers/staging/media/cec/cec-adap.c | 4 ++++ drivers/staging/media/cec/cec-api.c | 2 +- include/linux/cec.h | 5 ++++- 4 files changed, 29 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst index 04ee90099676..201d4839931c 100644 --- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst +++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst @@ -144,7 +144,7 @@ logical address types are already defined will return with error ``EBUSY``. - ``flags`` - - Flags. No flags are defined yet, so set this to 0. + - Flags. See :ref:`cec-log-addrs-flags` for a list of available flags. - .. row 7 @@ -201,6 +201,25 @@ logical address types are already defined will return with error ``EBUSY``. give the CEC framework more information about the device type, even though the framework won't use it directly in the CEC message. +.. _cec-log-addrs-flags: + +.. flat-table:: Flags for struct cec_log_addrs + :header-rows: 0 + :stub-columns: 0 + :widths: 3 1 4 + + + - .. _`CEC-LOG-ADDRS-FL-ALLOW-UNREG-FALLBACK`: + + - ``CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK`` + + - 1 + + - By default if no logical address of the requested type can be claimed, then + it will go back to the unconfigured state. If this flag is set, then it will + fallback to the Unregistered logical address. Note that if the Unregistered + logical address was explicitly requested, then this flag has no effect. + .. _cec-versions: .. flat-table:: CEC Versions diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/staging/media/cec/cec-adap.c index 9dcb784b8d6a..2458a6c87642 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/staging/media/cec/cec-adap.c @@ -1047,6 +1047,10 @@ static int cec_config_thread_func(void *arg) dprintk(1, "could not claim LA %d\n", i); } + if (adap->log_addrs.log_addr_mask == 0 && + !(las->flags & CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK)) + goto unconfigure; + configured: if (adap->log_addrs.log_addr_mask == 0) { /* Fall back to unregistered */ diff --git a/drivers/staging/media/cec/cec-api.c b/drivers/staging/media/cec/cec-api.c index 4e2696a34ddb..6f58ee85eea4 100644 --- a/drivers/staging/media/cec/cec-api.c +++ b/drivers/staging/media/cec/cec-api.c @@ -162,7 +162,7 @@ static long cec_adap_s_log_addrs(struct cec_adapter *adap, struct cec_fh *fh, return -ENOTTY; if (copy_from_user(&log_addrs, parg, sizeof(log_addrs))) return -EFAULT; - log_addrs.flags = 0; + log_addrs.flags &= CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK; mutex_lock(&adap->lock); if (!adap->is_configuring && (!log_addrs.num_log_addrs || !adap->is_configured) && diff --git a/include/linux/cec.h b/include/linux/cec.h index b3e22893a002..851968e803fa 100644 --- a/include/linux/cec.h +++ b/include/linux/cec.h @@ -364,7 +364,7 @@ struct cec_caps { * @num_log_addrs: how many logical addresses should be claimed. Set by the * caller. * @vendor_id: the vendor ID of the device. Set by the caller. - * @flags: set to 0. + * @flags: flags. * @osd_name: the OSD name of the device. Set by the caller. * @primary_device_type: the primary device type for each logical address. * Set by the caller. @@ -389,6 +389,9 @@ struct cec_log_addrs { __u8 features[CEC_MAX_LOG_ADDRS][12]; }; +/* Allow a fallback to unregistered */ +#define CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK (1 << 0) + /* Events */ /* Event that occurs when the adapter state changes */ -- cgit v1.3-18-gd494 From 0c1d61b0e4ed68d125b21fed375c38b6e3c2a658 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 14 Aug 2016 08:27:09 -0300 Subject: [media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID Up to 4 logical addresses can be claimed. Make sure that any unclaimed logical addresses are set to CEC_LOG_ADDR_INVALID as per the documentation. Take special care in the unregistered case: when falling back to unregistered num_log_addrs may be > 1, so mark those as invalid. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-adap.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/staging/media/cec/cec-adap.c index 2458a6c87642..6cc7d7904446 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/staging/media/cec/cec-adap.c @@ -1056,6 +1056,8 @@ configured: /* Fall back to unregistered */ las->log_addr[0] = CEC_LOG_ADDR_UNREGISTERED; las->log_addr_mask = 1 << las->log_addr[0]; + for (i = 1; i < las->num_log_addrs; i++) + las->log_addr[i] = CEC_LOG_ADDR_INVALID; } adap->is_configured = true; adap->is_configuring = false; @@ -1074,6 +1076,8 @@ configured: cec_report_features(adap, i); cec_report_phys_addr(adap, i); } + for (i = las->num_log_addrs; i < CEC_MAX_LOG_ADDRS; i++) + las->log_addr[i] = CEC_LOG_ADDR_INVALID; mutex_lock(&adap->lock); adap->kthread_config = NULL; mutex_unlock(&adap->lock); -- cgit v1.3-18-gd494 From 260ff1144a9dd1afb85cf5da462672d68412cbc4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 19 Jul 2016 08:44:32 -0300 Subject: [media] cec: add item to TODO Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/TODO | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/media/cec/TODO b/drivers/staging/media/cec/TODO index a10d4f82b954..13224694a8ae 100644 --- a/drivers/staging/media/cec/TODO +++ b/drivers/staging/media/cec/TODO @@ -12,6 +12,7 @@ Hopefully this will happen later in 2016. Other TODOs: +- There are two possible replies to CEC_MSG_INITIATE_ARC. How to handle that? - Add a flag to inhibit passing CEC RC messages to the rc subsystem. Applications should be able to choose this when calling S_LOG_ADDRS. - If the reply field of cec_msg is set then when the reply arrives it -- cgit v1.3-18-gd494 From 3e92d8b238e48dfb539e8112bb2cc463e35e1b71 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 12 Aug 2016 13:32:07 -0300 Subject: [media] cec: ignore messages when log_addr_mask == 0 Most CEC adapters will still receive broadcast messages, even if no logical addresses are claimed. But those messages should only be passed on for monitoring purposes, but not for processing by either kernel or userspace if userspace didn't call CEC_ADAP_S_LOG_ADDRS first. So if adap->log_addrs.log_addr_mask is 0, then just return before passing the received message on to the processing code. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-adap.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/staging/media/cec/cec-adap.c index 6cc7d7904446..e980ac9c9279 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/staging/media/cec/cec-adap.c @@ -851,6 +851,9 @@ void cec_received_msg(struct cec_adapter *adap, struct cec_msg *msg) if (!valid_la || msg->len <= 1) return; + if (adap->log_addrs.log_addr_mask == 0) + return; + /* * Process the message on the protocol level. If is_reply is true, * then cec_receive_notify() won't pass on the reply to the listener(s) -- cgit v1.3-18-gd494 From 73b14977549e4e1214413e7da2d0e97a9947bf8d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 14 Aug 2016 06:45:54 -0300 Subject: [media] mtk-vcodec: add HAS_DMA dependency This fixes this kbuild test robot error: tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master head: 329f4152911c276b074bec75a0443f88821afdb7 commit: c1023ba74fc77dc56dc317bd98f5060aab889ac1 [media] drivers/media/platform/Kconfig: fix VIDEO_MEDIATEK_VCODEC dependency config: m32r-allyesconfig (attached as .config) compiler: m32r-linux-gcc (GCC) 4.9.0 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross git checkout c1023ba74fc77dc56dc317bd98f5060aab889ac1 # save the attached .config to linux build tree make.cross ARCH=m32r All errors (new ones prefixed by >>): drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr': >> >> drivers/media/v4l2-core/videobuf2-dma-contig.c:486:2: error: implicit declaration of function 'dma_get_cache_alignment' [-Werror=implicit-function-declaration] unsigned long dma_align = dma_get_cache_alignment(); ^ cc1: some warnings being treated as errors This driver depends on HAS_DMA for dma_get_cache_alignment(). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index f25344bc7912..552b635cfce7 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -169,7 +169,7 @@ config VIDEO_MEDIATEK_VPU config VIDEO_MEDIATEK_VCODEC tristate "Mediatek Video Codec driver" depends on MTK_IOMMU || COMPILE_TEST - depends on VIDEO_DEV && VIDEO_V4L2 + depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA depends on ARCH_MEDIATEK || COMPILE_TEST select VIDEOBUF2_DMA_CONTIG select V4L2_MEM2MEM_DEV -- cgit v1.3-18-gd494 From 1e6e97541ab51b65019bd823506af81ebb3730fc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 12 Aug 2016 06:44:27 -0300 Subject: [media] pulse8-cec: set correct Signal Free Time Don't hardcode the signal free time to 3 bit periods, instead use the value for the signal free time as passed in by the CEC framework. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/pulse8-cec/pulse8-cec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/pulse8-cec/pulse8-cec.c b/drivers/staging/media/pulse8-cec/pulse8-cec.c index 94f8590492dc..28f853c80b19 100644 --- a/drivers/staging/media/pulse8-cec/pulse8-cec.c +++ b/drivers/staging/media/pulse8-cec/pulse8-cec.c @@ -388,7 +388,7 @@ static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, int err; cmd[0] = MSGCODE_TRANSMIT_IDLETIME; - cmd[1] = 3; + cmd[1] = signal_free_time; err = pulse8_send_and_wait(pulse8, cmd, 2, MSGCODE_COMMAND_ACCEPTED, 1); cmd[0] = MSGCODE_TRANSMIT_ACK_POLARITY; -- cgit v1.3-18-gd494 From 31f58e31dc0e170e117a83584103921269b7581b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 12 Aug 2016 06:46:06 -0300 Subject: [media] pulse8-cec: fix error handling Support more error codes and fix a bug where MSGCODE_TRANSMIT_FAILED_LINE was mapped to CEC_TX_STATUS_ARB_LOST, which is wrong. Thanks to Pulse-Eight for providing me with the information needed to handle this correctly (I hope). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/pulse8-cec/pulse8-cec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/media/pulse8-cec/pulse8-cec.c b/drivers/staging/media/pulse8-cec/pulse8-cec.c index 28f853c80b19..ed8bd95ad6d0 100644 --- a/drivers/staging/media/pulse8-cec/pulse8-cec.c +++ b/drivers/staging/media/pulse8-cec/pulse8-cec.c @@ -114,14 +114,11 @@ static void pulse8_irq_work_handler(struct work_struct *work) cec_transmit_done(pulse8->adap, CEC_TX_STATUS_OK, 0, 0, 0, 0); break; - case MSGCODE_TRANSMIT_FAILED_LINE: - cec_transmit_done(pulse8->adap, CEC_TX_STATUS_ARB_LOST, - 1, 0, 0, 0); - break; case MSGCODE_TRANSMIT_FAILED_ACK: cec_transmit_done(pulse8->adap, CEC_TX_STATUS_NACK, 0, 1, 0, 0); break; + case MSGCODE_TRANSMIT_FAILED_LINE: case MSGCODE_TRANSMIT_FAILED_TIMEOUT_DATA: case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE: cec_transmit_done(pulse8->adap, CEC_TX_STATUS_ERROR, @@ -170,6 +167,9 @@ static irqreturn_t pulse8_interrupt(struct serio *serio, unsigned char data, case MSGCODE_TRANSMIT_FAILED_TIMEOUT_LINE: schedule_work(&pulse8->work); break; + case MSGCODE_HIGH_ERROR: + case MSGCODE_LOW_ERROR: + case MSGCODE_RECEIVE_FAILED: case MSGCODE_TIMEOUT_ERROR: break; case MSGCODE_COMMAND_ACCEPTED: -- cgit v1.3-18-gd494 From 8ac6a1a53e9f195e8c4336a7edfba2e102fc14bb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 18 Aug 2016 04:13:42 -0300 Subject: [media] cec-edid: check for IEEE identifier The cec_get_edid_spa_location() function did not verify that the IEEE identifier in the Vendor Specific Data Block matched the HDMI-LLC identifier. This could result in the wrong VSDB block being returned. For example, for HDMI 2.0 EDIDs there is also a HDMI Forum VSDB. So check the IEEE identifier as well. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec-edid.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/cec-edid.c b/drivers/media/cec-edid.c index 70018247bdda..5719b991e340 100644 --- a/drivers/media/cec-edid.c +++ b/drivers/media/cec-edid.c @@ -70,7 +70,10 @@ static unsigned int cec_get_edid_spa_location(const u8 *edid, unsigned int size) u8 tag = edid[i] >> 5; u8 len = edid[i] & 0x1f; - if (tag == 3 && len >= 5 && i + len <= end) + if (tag == 3 && len >= 5 && i + len <= end && + edid[i + 1] == 0x03 && + edid[i + 2] == 0x0c && + edid[i + 3] == 0x00) return i + 4; i += len + 1; } while (i < end); -- cgit v1.3-18-gd494 From e6a00f6684c9f348cd782922b4b277c68ab90b63 Mon Sep 17 00:00:00 2001 From: Yuval Shaia Date: Wed, 27 Jul 2016 01:24:52 -0700 Subject: IB/mlx4: Make function use_tunnel_data return void No need to return int if function always returns 0 Signed-off-by: Yuval Shaia Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/cq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index d6fc8a6e8c33..15b628996633 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -576,8 +576,8 @@ static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum) checksum == cpu_to_be16(0xffff); } -static int use_tunnel_data(struct mlx4_ib_qp *qp, struct mlx4_ib_cq *cq, struct ib_wc *wc, - unsigned tail, struct mlx4_cqe *cqe, int is_eth) +static void use_tunnel_data(struct mlx4_ib_qp *qp, struct mlx4_ib_cq *cq, struct ib_wc *wc, + unsigned tail, struct mlx4_cqe *cqe, int is_eth) { struct mlx4_ib_proxy_sqp_hdr *hdr; @@ -600,8 +600,6 @@ static int use_tunnel_data(struct mlx4_ib_qp *qp, struct mlx4_ib_cq *cq, struct wc->slid = be16_to_cpu(hdr->tun.slid_mac_47_32); wc->sl = (u8) (be16_to_cpu(hdr->tun.sl_vid) >> 12); } - - return 0; } static void mlx4_ib_qp_sw_comp(struct mlx4_ib_qp *qp, int num_entries, @@ -852,9 +850,11 @@ repoll: if (mlx4_is_mfunc(to_mdev(cq->ibcq.device)->dev)) { if ((*cur_qp)->mlx4_ib_qp_type & (MLX4_IB_QPT_PROXY_SMI_OWNER | - MLX4_IB_QPT_PROXY_SMI | MLX4_IB_QPT_PROXY_GSI)) - return use_tunnel_data(*cur_qp, cq, wc, tail, - cqe, is_eth); + MLX4_IB_QPT_PROXY_SMI | MLX4_IB_QPT_PROXY_GSI)) { + use_tunnel_data(*cur_qp, cq, wc, tail, cqe, + is_eth); + return 0; + } } wc->slid = be16_to_cpu(cqe->rlid); -- cgit v1.3-18-gd494 From 5412352fcd8fba7f278ae8c9ba36296716f17ae8 Mon Sep 17 00:00:00 2001 From: Yuval Shaia Date: Wed, 27 Jul 2016 01:24:53 -0700 Subject: IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one Error code EAGAIN should be used when errors are temporary and next call might succeeds. When error code other than EAGAIN is returned, the caller (mlx4_ib_poll) will assume all CQE in the same bunch are error too and will drop them all. Signed-off-by: Yuval Shaia Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/cq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 15b628996633..006db6436e3b 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -690,7 +690,7 @@ repoll: if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_OPCODE_NOP && is_send)) { pr_warn("Completion for NOP opcode detected!\n"); - return -EINVAL; + return -EAGAIN; } /* Resize CQ in progress */ @@ -721,7 +721,7 @@ repoll: if (unlikely(!mqp)) { pr_warn("CQ %06x with entry for unknown QPN %06x\n", cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK); - return -EINVAL; + return -EAGAIN; } *cur_qp = to_mibqp(mqp); @@ -739,7 +739,7 @@ repoll: if (unlikely(!msrq)) { pr_warn("CQ %06x with entry for unknown SRQN %06x\n", cq->mcq.cqn, srq_num); - return -EINVAL; + return -EAGAIN; } } -- cgit v1.3-18-gd494 From 8303f683b161467b6595c153c8751b80f9df3508 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Wed, 3 Aug 2016 20:19:32 -0400 Subject: IB/hfi1: Allocate cpu mask on the heap to silence warning If CONFIG_FRAME_WARN is small (1K) and CONFIG_NR_CPUS big then a frame size warning is triggered during build. Allocate the cpu mask dynamically to silence the warning. Reviewed-by: Sebastian Sanchez Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/affinity.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c index 79575ee873f2..9bbb21459166 100644 --- a/drivers/infiniband/hw/hfi1/affinity.c +++ b/drivers/infiniband/hw/hfi1/affinity.c @@ -682,7 +682,7 @@ int hfi1_set_sdma_affinity(struct hfi1_devdata *dd, const char *buf, size_t count) { struct hfi1_affinity_node *entry; - struct cpumask mask; + cpumask_var_t mask; int ret, i; spin_lock(&node_affinity.lock); @@ -692,19 +692,24 @@ int hfi1_set_sdma_affinity(struct hfi1_devdata *dd, const char *buf, if (!entry) return -EINVAL; - ret = cpulist_parse(buf, &mask); + ret = zalloc_cpumask_var(&mask, GFP_KERNEL); + if (!ret) + return -ENOMEM; + + ret = cpulist_parse(buf, mask); if (ret) - return ret; + goto out; - if (!cpumask_subset(&mask, cpu_online_mask) || cpumask_empty(&mask)) { + if (!cpumask_subset(mask, cpu_online_mask) || cpumask_empty(mask)) { dd_dev_warn(dd, "Invalid CPU mask\n"); - return -EINVAL; + ret = -EINVAL; + goto out; } mutex_lock(&sdma_affinity_mutex); /* reset the SDMA interrupt affinity details */ init_cpu_mask_set(&entry->def_intr); - cpumask_copy(&entry->def_intr.mask, &mask); + cpumask_copy(&entry->def_intr.mask, mask); /* * Reassign the affinity for each SDMA interrupt. */ @@ -720,8 +725,9 @@ int hfi1_set_sdma_affinity(struct hfi1_devdata *dd, const char *buf, if (ret) break; } - mutex_unlock(&sdma_affinity_mutex); +out: + free_cpumask_var(mask); return ret ? ret : strnlen(buf, PAGE_SIZE); } -- cgit v1.3-18-gd494 From 23d70503ee187819a3775c7ac73f17c5bfe3fad0 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 5 Aug 2016 13:46:49 +0000 Subject: IB/core: Fix possible memory leak in cma_resolve_iboe_route() 'work' and 'route->path_rec' are malloced in cma_resolve_iboe_route() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: 200298326b27 ('IB/core: Validate route when we init ah') Signed-off-by: Wei Yongjun Reviewed-by: Haggai Eran Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index e6dfa1bd3def..5f65a78b27c9 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2462,18 +2462,24 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv) if (addr->dev_addr.bound_dev_if) { ndev = dev_get_by_index(&init_net, addr->dev_addr.bound_dev_if); - if (!ndev) - return -ENODEV; + if (!ndev) { + ret = -ENODEV; + goto err2; + } if (ndev->flags & IFF_LOOPBACK) { dev_put(ndev); - if (!id_priv->id.device->get_netdev) - return -EOPNOTSUPP; + if (!id_priv->id.device->get_netdev) { + ret = -EOPNOTSUPP; + goto err2; + } ndev = id_priv->id.device->get_netdev(id_priv->id.device, id_priv->id.port_num); - if (!ndev) - return -ENODEV; + if (!ndev) { + ret = -ENODEV; + goto err2; + } } route->path_rec->net = &init_net; -- cgit v1.3-18-gd494 From 1d5840c971455ad4ecece3f72012961cac8d0f00 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Aug 2016 12:20:38 +0000 Subject: IB/isert: fix error return code in isert_alloc_login_buf() Fix to return error code -ENOMEM from the alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Acked-by: Sagi Grimberg Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/isert/ib_isert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index ba6be060a476..7914c14478cd 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -448,7 +448,7 @@ isert_alloc_login_buf(struct isert_conn *isert_conn, isert_conn->login_rsp_buf = kzalloc(ISER_RX_PAYLOAD_SIZE, GFP_KERNEL); if (!isert_conn->login_rsp_buf) { - isert_err("Unable to allocate isert_conn->login_rspbuf\n"); + ret = -ENOMEM; goto out_unmap_login_req_buf; } -- cgit v1.3-18-gd494 From abb658ef0529488cfa75e79a2a9f894cb95eaec3 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Aug 2016 09:49:47 +0000 Subject: IB/hfi1: Remove duplicated include from affinity.c Remove duplicated include. Signed-off-by: Wei Yongjun Reviewed-by: Leon Romanovsky Reviewed-by: Ira Weiny Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/affinity.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c index 9bbb21459166..0566393e5aba 100644 --- a/drivers/infiniband/hw/hfi1/affinity.c +++ b/drivers/infiniband/hw/hfi1/affinity.c @@ -47,7 +47,6 @@ #include #include #include -#include #include "hfi.h" #include "affinity.h" -- cgit v1.3-18-gd494 From c62fb260a86dde3df5b2905432caa0e9f6898434 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 12 Aug 2016 11:17:37 -0400 Subject: IB/hfi1,IB/qib: Fix qp_stats sleep with rcu read lock held The qp init function does a kzalloc() while holding the RCU lock that encounters the following warning with a debug kernel when a cat of the qp_stats is done: [ 231.723948] rcu_scheduler_active = 1, debug_locks = 0 [ 231.731939] 3 locks held by cat/11355: [ 231.736492] #0: (debugfs_srcu){......}, at: [] debugfs_use_file_start+0x5/0x90 [ 231.746955] #1: (&p->lock){+.+.+.}, at: [] seq_read+0x4c/0x3c0 [ 231.755873] #2: (rcu_read_lock){......}, at: [] _qp_stats_seq_start+0x5/0xd0 [hfi1] [ 231.766862] The init functions do an implicit next which requires the rcu read lock before the kzalloc(). Fix for both drivers is to change the scope of the init function to only do the allocation and the initialization of the just allocated iter. The implict next is moved back into the respective start functions to fix the issue. Signed-off-by: Ira Weiny Signed-off-by: Mike Marciniszyn CC: # 4.6.x- Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/debugfs.c | 14 +++++++++----- drivers/infiniband/hw/hfi1/qp.c | 4 ---- drivers/infiniband/hw/qib/qib_debugfs.c | 12 +++++++++--- drivers/infiniband/hw/qib/qib_qp.c | 4 ---- 4 files changed, 18 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/debugfs.c b/drivers/infiniband/hw/hfi1/debugfs.c index dbab9d9cc288..a49cc88f08a2 100644 --- a/drivers/infiniband/hw/hfi1/debugfs.c +++ b/drivers/infiniband/hw/hfi1/debugfs.c @@ -223,28 +223,32 @@ DEBUGFS_SEQ_FILE_OPEN(ctx_stats) DEBUGFS_FILE_OPS(ctx_stats); static void *_qp_stats_seq_start(struct seq_file *s, loff_t *pos) -__acquires(RCU) + __acquires(RCU) { struct qp_iter *iter; loff_t n = *pos; - rcu_read_lock(); iter = qp_iter_init(s->private); + + /* stop calls rcu_read_unlock */ + rcu_read_lock(); + if (!iter) return NULL; - while (n--) { + do { if (qp_iter_next(iter)) { kfree(iter); return NULL; } - } + } while (n--); return iter; } static void *_qp_stats_seq_next(struct seq_file *s, void *iter_ptr, loff_t *pos) + __must_hold(RCU) { struct qp_iter *iter = iter_ptr; @@ -259,7 +263,7 @@ static void *_qp_stats_seq_next(struct seq_file *s, void *iter_ptr, } static void _qp_stats_seq_stop(struct seq_file *s, void *iter_ptr) -__releases(RCU) + __releases(RCU) { rcu_read_unlock(); } diff --git a/drivers/infiniband/hw/hfi1/qp.c b/drivers/infiniband/hw/hfi1/qp.c index a5aa3517e7d5..4e4d8317c281 100644 --- a/drivers/infiniband/hw/hfi1/qp.c +++ b/drivers/infiniband/hw/hfi1/qp.c @@ -656,10 +656,6 @@ struct qp_iter *qp_iter_init(struct hfi1_ibdev *dev) iter->dev = dev; iter->specials = dev->rdi.ibdev.phys_port_cnt * 2; - if (qp_iter_next(iter)) { - kfree(iter); - return NULL; - } return iter; } diff --git a/drivers/infiniband/hw/qib/qib_debugfs.c b/drivers/infiniband/hw/qib/qib_debugfs.c index 5e75b43c596b..5bad8e3b40bb 100644 --- a/drivers/infiniband/hw/qib/qib_debugfs.c +++ b/drivers/infiniband/hw/qib/qib_debugfs.c @@ -189,27 +189,32 @@ static int _ctx_stats_seq_show(struct seq_file *s, void *v) DEBUGFS_FILE(ctx_stats) static void *_qp_stats_seq_start(struct seq_file *s, loff_t *pos) + __acquires(RCU) { struct qib_qp_iter *iter; loff_t n = *pos; - rcu_read_lock(); iter = qib_qp_iter_init(s->private); + + /* stop calls rcu_read_unlock */ + rcu_read_lock(); + if (!iter) return NULL; - while (n--) { + do { if (qib_qp_iter_next(iter)) { kfree(iter); return NULL; } - } + } while (n--); return iter; } static void *_qp_stats_seq_next(struct seq_file *s, void *iter_ptr, loff_t *pos) + __must_hold(RCU) { struct qib_qp_iter *iter = iter_ptr; @@ -224,6 +229,7 @@ static void *_qp_stats_seq_next(struct seq_file *s, void *iter_ptr, } static void _qp_stats_seq_stop(struct seq_file *s, void *iter_ptr) + __releases(RCU) { rcu_read_unlock(); } diff --git a/drivers/infiniband/hw/qib/qib_qp.c b/drivers/infiniband/hw/qib/qib_qp.c index 9cc0aae1d781..f9b8cd2354d1 100644 --- a/drivers/infiniband/hw/qib/qib_qp.c +++ b/drivers/infiniband/hw/qib/qib_qp.c @@ -573,10 +573,6 @@ struct qib_qp_iter *qib_qp_iter_init(struct qib_ibdev *dev) return NULL; iter->dev = dev; - if (qib_qp_iter_next(iter)) { - kfree(iter); - return NULL; - } return iter; } -- cgit v1.3-18-gd494 From 140690eae7626a820ea135f33ff9fe11c1bcee6d Mon Sep 17 00:00:00 2001 From: Easwar Hariharan Date: Tue, 9 Aug 2016 11:17:18 -0400 Subject: IB/hfi1: Fetch monitor values on-demand for CableInfo query The monitor values from bytes 22 through 81 of the QSFP memory space (SFF 8636) are dynamic and serving them out of the QSFP memory cache maintained by the driver provides stale data to the CableInfo SMA query. This patch refreshes the dynamic values from the QSFP memory on request and overwrites the stale data from the cache for the overlap between the requested range and the monitor range. Reviewed-by: Jubin John Reviewed-by: Ira Weiny Signed-off-by: Easwar Hariharan Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/qsfp.c | 32 ++++++++++++++++++++++++++++++-- drivers/infiniband/hw/hfi1/qsfp.h | 3 +++ 2 files changed, 33 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/qsfp.c b/drivers/infiniband/hw/hfi1/qsfp.c index a207717ade2a..4e95ad810847 100644 --- a/drivers/infiniband/hw/hfi1/qsfp.c +++ b/drivers/infiniband/hw/hfi1/qsfp.c @@ -706,8 +706,8 @@ int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len, u8 *data) { struct hfi1_pportdata *ppd; - u32 excess_len = 0; - int ret = 0; + u32 excess_len = len; + int ret = 0, offset = 0; if (port_num > dd->num_pports || port_num < 1) { dd_dev_info(dd, "%s: Invalid port number %d\n", @@ -740,6 +740,34 @@ int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len, } memcpy(data, &ppd->qsfp_info.cache[addr], len); + + if (addr <= QSFP_MONITOR_VAL_END && + (addr + len) >= QSFP_MONITOR_VAL_START) { + /* Overlap with the dynamic channel monitor range */ + if (addr < QSFP_MONITOR_VAL_START) { + if (addr + len <= QSFP_MONITOR_VAL_END) + len = addr + len - QSFP_MONITOR_VAL_START; + else + len = QSFP_MONITOR_RANGE; + offset = QSFP_MONITOR_VAL_START - addr; + addr = QSFP_MONITOR_VAL_START; + } else if (addr == QSFP_MONITOR_VAL_START) { + offset = 0; + if (addr + len > QSFP_MONITOR_VAL_END) + len = QSFP_MONITOR_RANGE; + } else { + offset = 0; + if (addr + len > QSFP_MONITOR_VAL_END) + len = QSFP_MONITOR_VAL_END - addr + 1; + } + /* Refresh the values of the dynamic monitors from the cable */ + ret = one_qsfp_read(ppd, dd->hfi1_id, addr, data + offset, len); + if (ret != len) { + ret = -EAGAIN; + goto set_zeroes; + } + } + return 0; set_zeroes: diff --git a/drivers/infiniband/hw/hfi1/qsfp.h b/drivers/infiniband/hw/hfi1/qsfp.h index 69275ebd9597..36cf52359848 100644 --- a/drivers/infiniband/hw/hfi1/qsfp.h +++ b/drivers/infiniband/hw/hfi1/qsfp.h @@ -74,6 +74,9 @@ /* Defined fields that Intel requires of qualified cables */ /* Byte 0 is Identifier, not checked */ /* Byte 1 is reserved "status MSB" */ +#define QSFP_MONITOR_VAL_START 22 +#define QSFP_MONITOR_VAL_END 81 +#define QSFP_MONITOR_RANGE (QSFP_MONITOR_VAL_END - QSFP_MONITOR_VAL_START + 1) #define QSFP_TX_CTRL_BYTE_OFFS 86 #define QSFP_PWR_CTRL_BYTE_OFFS 93 #define QSFP_CDR_CTRL_BYTE_OFFS 98 -- cgit v1.3-18-gd494 From c867caaf8ecd5498d399558d0f11825f175c6cdd Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 9 Aug 2016 11:19:55 -0400 Subject: IB/hfi1: Pass packet ptr to set_armed_active The "packet" parameter was being passed on the stack, change it to a pointer. Reviewed-by: Don Hiatt Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/driver.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c index 8246dc7d0573..c4156870a8bb 100644 --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -888,14 +888,14 @@ void set_all_slowpath(struct hfi1_devdata *dd) } static inline int set_armed_to_active(struct hfi1_ctxtdata *rcd, - struct hfi1_packet packet, + struct hfi1_packet *packet, struct hfi1_devdata *dd) { struct work_struct *lsaw = &rcd->ppd->linkstate_active_work; - struct hfi1_message_header *hdr = hfi1_get_msgheader(packet.rcd->dd, - packet.rhf_addr); + struct hfi1_message_header *hdr = hfi1_get_msgheader(packet->rcd->dd, + packet->rhf_addr); - if (hdr2sc(hdr, packet.rhf) != 0xf) { + if (hdr2sc(hdr, packet->rhf) != 0xf) { int hwstate = read_logical_state(dd); if (hwstate != LSTATE_ACTIVE) { @@ -979,7 +979,7 @@ int handle_receive_interrupt(struct hfi1_ctxtdata *rcd, int thread) /* Auto activate link on non-SC15 packet receive */ if (unlikely(rcd->ppd->host_link_state == HLS_UP_ARMED) && - set_armed_to_active(rcd, packet, dd)) + set_armed_to_active(rcd, &packet, dd)) goto bail; last = process_rcv_packet(&packet, thread); } -- cgit v1.3-18-gd494 From 69b9f4a4233b6f9ea168c25123b9eb629739d8e5 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 9 Aug 2016 11:19:56 -0400 Subject: IB/hfi1: Validate header in set_armed_active Validate the etype to insure that the header is correct. Reviewed-by: Don Hiatt Signed-off-by: Mike Marciniszyn Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c index c4156870a8bb..303f10555729 100644 --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -894,8 +894,9 @@ static inline int set_armed_to_active(struct hfi1_ctxtdata *rcd, struct work_struct *lsaw = &rcd->ppd->linkstate_active_work; struct hfi1_message_header *hdr = hfi1_get_msgheader(packet->rcd->dd, packet->rhf_addr); + u8 etype = rhf_rcv_type(packet->rhf); - if (hdr2sc(hdr, packet->rhf) != 0xf) { + if (etype == RHF_RCV_TYPE_IB && hdr2sc(hdr, packet->rhf) != 0xf) { int hwstate = read_logical_state(dd); if (hwstate != LSTATE_ACTIVE) { -- cgit v1.3-18-gd494 From 476d95bd02240894806ebe64f1c4dcf6dbba87f4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 10 Aug 2016 03:14:04 +0000 Subject: IB/hfi1: Using kfree_rcu() to simplify the code The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Wei Yongjun Tested-by: Mike Marciniszyn Acked-by: Mike Marciniszyn Tested-by: Mike Marciniszyn Acked-by: Mike Marciniszyn Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/hfi.h | 1 - drivers/infiniband/hw/hfi1/init.c | 2 +- drivers/infiniband/hw/hfi1/mad.c | 9 +-------- 3 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 1000e0fd96d9..f41414ef0cbc 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1656,7 +1656,6 @@ struct cc_state *get_cc_state_protected(struct hfi1_pportdata *ppd) struct hfi1_devdata *hfi1_init_dd(struct pci_dev *, const struct pci_device_id *); void hfi1_free_devdata(struct hfi1_devdata *); -void cc_state_reclaim(struct rcu_head *rcu); struct hfi1_devdata *hfi1_alloc_devdata(struct pci_dev *pdev, size_t extra); /* LED beaconing functions */ diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index a358d23ecd54..b7935451093c 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1333,7 +1333,7 @@ static void cleanup_device_data(struct hfi1_devdata *dd) spin_unlock(&ppd->cc_state_lock); if (cc_state) - call_rcu(&cc_state->rcu, cc_state_reclaim); + kfree_rcu(cc_state, rcu); } free_credit_return(dd); diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 1263abe01999..95c43e1e0ce5 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -3398,7 +3398,7 @@ static void apply_cc_state(struct hfi1_pportdata *ppd) spin_unlock(&ppd->cc_state_lock); - call_rcu(&old_cc_state->rcu, cc_state_reclaim); + kfree_rcu(old_cc_state, rcu); } static int __subn_set_opa_cong_setting(struct opa_smp *smp, u32 am, u8 *data, @@ -3553,13 +3553,6 @@ static int __subn_get_opa_cc_table(struct opa_smp *smp, u32 am, u8 *data, return reply((struct ib_mad_hdr *)smp); } -void cc_state_reclaim(struct rcu_head *rcu) -{ - struct cc_state *cc_state = container_of(rcu, struct cc_state, rcu); - - kfree(cc_state); -} - static int __subn_set_opa_cc_table(struct opa_smp *smp, u32 am, u8 *data, struct ib_device *ibdev, u8 port, u32 *resp_len) -- cgit v1.3-18-gd494 From 57bb562ad4651453c9f20d506a65e46e4d11042f Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Wed, 10 Aug 2016 07:34:27 +0200 Subject: IB/hfi1: Add missing error code assignment before test It is likely that checking the result of 'setup_ctxt' is expected here. Signed-off-by: Christophe JAILLET Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/file_ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index 1ecbec192358..ed76be39b20b 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -222,7 +222,7 @@ static long hfi1_file_ioctl(struct file *fp, unsigned int cmd, ret = assign_ctxt(fp, &uinfo); if (ret < 0) return ret; - setup_ctxt(fp); + ret = setup_ctxt(fp); if (ret) return ret; ret = user_init(fp); -- cgit v1.3-18-gd494 From 86cd747c6dd6cdbc825e36ad5f0029f3c5a37776 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Wed, 10 Aug 2016 17:45:01 +0200 Subject: IB/usnic: Fix error return code If 'pci_register_driver' fails, we return 'err' which is known to be 0. Return the error instead. Signed-off-by: Christophe JAILLET Signed-off-by: Doug Ledford --- drivers/infiniband/hw/usnic/usnic_ib_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/usnic/usnic_ib_main.c b/drivers/infiniband/hw/usnic/usnic_ib_main.c index c229b9f4a52d..0a89a955550b 100644 --- a/drivers/infiniband/hw/usnic/usnic_ib_main.c +++ b/drivers/infiniband/hw/usnic/usnic_ib_main.c @@ -664,7 +664,8 @@ static int __init usnic_ib_init(void) return err; } - if (pci_register_driver(&usnic_ib_pci_driver)) { + err = pci_register_driver(&usnic_ib_pci_driver); + if (err) { usnic_err("Unable to register with PCI\n"); goto out_umem_fini; } -- cgit v1.3-18-gd494 From f29a08dc145e05de6a57f0aeaba6020464f80e15 Mon Sep 17 00:00:00 2001 From: Easwar Hariharan Date: Tue, 16 Aug 2016 13:25:34 -0700 Subject: IB/hfi1: Return invalid field for non-QSFP CableInfo queries The driver does not check if the CableInfo query is supported for the port type. Return early if CableInfo is not supported for the port type, making compliance with the specification explicit and preventing lower level code from potentially doing the wrong thing if the query is not supported for the hardware implementation. Reviewed-by: Ira Weiny Signed-off-by: Easwar Hariharan Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/mad.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 95c43e1e0ce5..39e42c373a01 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -1819,6 +1819,11 @@ static int __subn_get_opa_cable_info(struct opa_smp *smp, u32 am, u8 *data, u32 len = OPA_AM_CI_LEN(am) + 1; int ret; + if (dd->pport->port_type != PORT_TYPE_QSFP) { + smp->status |= IB_SMP_INVALID_FIELD; + return reply((struct ib_mad_hdr *)smp); + } + #define __CI_PAGE_SIZE BIT(7) /* 128 bytes */ #define __CI_PAGE_MASK ~(__CI_PAGE_SIZE - 1) #define __CI_PAGE_NUM(a) ((a) & __CI_PAGE_MASK) -- cgit v1.3-18-gd494 From 08fe16f6192bccd5798e9b60461f7aa151b34cd4 Mon Sep 17 00:00:00 2001 From: Mitko Haralanov Date: Tue, 16 Aug 2016 13:26:12 -0700 Subject: IB/hfi1: Improve J_KEY generation Previously, J_KEY generation was based on the lower 16 bits of the user's UID. While this works, it was not good enough as a non-root user could collide with a root user given a sufficiently large UID. This patch attempt to improve the J_KEY generation by using the following algorithm: The 16 bit J_KEY space is partitioned into 3 separate spaces reserved for different user classes: * all users with administtor privileges (including 'root') will use J_KEYs in the range of 0 to 31, * all kernel protocols, which use KDETH packets will use J_KEYs in the range of 32 to 63, and * all other users will use J_KEYs in the range of 64 to 65535. The above separation is aimed at preventing different user levels from sending packets to each other and, additionally, separate kernel protocols from all other types of users. The later is meant to prevent the potential corruption of kernel memory by any other type of user. Reviewed-by: Ira Weiny Signed-off-by: Mitko Haralanov Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/hfi.h | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index f41414ef0cbc..a021e660d482 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1272,9 +1272,26 @@ static inline int hdr2sc(struct hfi1_message_header *hdr, u64 rhf) ((!!(rhf_dc_info(rhf))) << 4); } +#define HFI1_JKEY_WIDTH 16 +#define HFI1_JKEY_MASK (BIT(16) - 1) +#define HFI1_ADMIN_JKEY_RANGE 32 + +/* + * J_KEYs are split and allocated in the following groups: + * 0 - 31 - users with administrator privileges + * 32 - 63 - kernel protocols using KDETH packets + * 64 - 65535 - all other users using KDETH packets + */ static inline u16 generate_jkey(kuid_t uid) { - return from_kuid(current_user_ns(), uid) & 0xffff; + u16 jkey = from_kuid(current_user_ns(), uid) & HFI1_JKEY_MASK; + + if (capable(CAP_SYS_ADMIN)) + jkey &= HFI1_ADMIN_JKEY_RANGE - 1; + else if (jkey < 64) + jkey |= BIT(HFI1_JKEY_WIDTH - 1); + + return jkey; } /* -- cgit v1.3-18-gd494 From 56c8ca510de2884b2f741e5fd8d3df6161378de6 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Tue, 16 Aug 2016 13:26:29 -0700 Subject: IB/rdmvat: Fix double vfree() in rvt_create_qp() error path The unwind logic for creating a user QP has a double vfree of the non-shared receive queue when handling a "too many qps" failure. The code unwinds the mmmap info by decrementing a reference count which will call rvt_release_mmap_info() which in turn does the vfree() of the r_rq.wq. The unwind code then does the same free. Fix by guarding the vfree() with the same test that is done in close and only do the vfree() if qp->ip is NULL. Reviewed-by: Dennis Dalessandro Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/qp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index bdb540f25a88..870b4f212fbc 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -873,7 +873,8 @@ bail_qpn: free_qpn(&rdi->qp_dev->qpn_table, qp->ibqp.qp_num); bail_rq_wq: - vfree(qp->r_rq.wq); + if (!qp->ip) + vfree(qp->r_rq.wq); bail_driver_priv: rdi->driver_f.qp_priv_free(rdi, qp); -- cgit v1.3-18-gd494 From e0cf75deab8155334c8228eb7f097b15127d0a49 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Tue, 16 Aug 2016 13:27:03 -0700 Subject: IB/hfi1: Fix mm_struct use after free Testing with CONFIG_SLUB_DEBUG_ON=y resulted in the kernel panic below. This is the result of the mm_struct sometimes being free'd prior to hfi1_file_close being called. This was due to the combination of 2 reasons: 1) hfi1_file_close is deferred in process exit and it therefore may not be called synchronously with process exit. 2) exit_mm is called prior to exit_files in do_exit. Normally this is ok however, our kernel bypass code requires us to have access to the mm_struct for house keeping both at "normal" close time as well as at process exit. Therefore, the fix is to simply keep a reference to the mm_struct until we are done with it. [ 3006.340150] general protection fault: 0000 [#1] SMP [ 3006.346469] Modules linked in: hfi1 rdmavt rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod snd_hda_code c_realtek iTCO_wdt snd_hda_codec_generic iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass c rct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw snd_hda_intel gf128mul snd_hda_codec glue_helper snd_hda_core ablk_helper sn d_hwdep cryptd snd_seq snd_seq_device snd_pcm snd_timer snd soundcore pcspkr shpchp mei_me sg lpc_ich mei i2c_i801 mfd_core ioatdma ipmi_devi ntf wmi ipmi_si ipmi_msghandler acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 jbd2 mbcache mlx4_en ib_core sr_mod s d_mod cdrom crc32c_intel mgag200 drm_kms_helper syscopyarea sysfillrect igb sysimgblt fb_sys_fops ptp mlx4_core ttm isci pps_core ahci drm li bsas libahci dca firewire_ohci i2c_algo_bit scsi_transport_sas firewire_core crc_itu_t i2c_core libata [last unloaded: mlx4_ib] [ 3006.461759] CPU: 16 PID: 11624 Comm: mpi_stress Not tainted 4.7.0-rc5+ #1 [ 3006.469915] Hardware name: Intel Corporation W2600CR ........../W2600CR, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013 [ 3006.483027] task: ffff8804102f0040 ti: ffff8804102f8000 task.ti: ffff8804102f8000 [ 3006.491971] RIP: 0010:[] [] __lock_acquire+0xb3/0x19e0 [ 3006.501905] RSP: 0018:ffff8804102fb908 EFLAGS: 00010002 [ 3006.508447] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000 [ 3006.517012] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880410b56a40 [ 3006.525569] RBP: ffff8804102fb9b0 R08: 0000000000000001 R09: 0000000000000000 [ 3006.534119] R10: ffff8804102f0040 R11: 0000000000000000 R12: 0000000000000000 [ 3006.542664] R13: ffff880410b56a40 R14: 0000000000000000 R15: 0000000000000000 [ 3006.551203] FS: 00007ff478c08700(0000) GS:ffff88042e200000(0000) knlGS:0000000000000000 [ 3006.560814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3006.567806] CR2: 00007f667f5109e0 CR3: 0000000001c06000 CR4: 00000000000406e0 [ 3006.576352] Stack: [ 3006.579157] ffffffff8124b819 ffffffffffffffff 0000000000000000 ffff8804102fb940 [ 3006.588072] 0000000000000002 0000000000000000 ffff8804102f0040 0000000000000007 [ 3006.596971] 0000000000000006 ffff8803cad6f000 0000000000000000 ffff8804102f0040 [ 3006.605878] Call Trace: [ 3006.609220] [] ? uncharge_batch+0x109/0x250 [ 3006.616382] [] lock_acquire+0xd3/0x220 [ 3006.623056] [] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.631593] [] down_write+0x49/0x80 [ 3006.638022] [] ? hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.646569] [] hfi1_release_user_pages+0x7c/0xa0 [hfi1] [ 3006.654898] [] cacheless_tid_rb_remove+0x106/0x330 [hfi1] [ 3006.663417] [] ? mark_held_locks+0x66/0x90 [ 3006.670498] [] ? _raw_spin_unlock_irqrestore+0x36/0x60 [ 3006.678741] [] tid_rb_remove+0xe/0x10 [hfi1] [ 3006.686010] [] hfi1_mmu_rb_unregister+0xc5/0x100 [hfi1] [ 3006.694387] [] hfi1_user_exp_rcv_free+0x39/0x120 [hfi1] [ 3006.702732] [] hfi1_file_close+0x17a/0x330 [hfi1] [ 3006.710489] [] __fput+0xfa/0x230 [ 3006.716595] [] ____fput+0xe/0x10 [ 3006.722696] [] task_work_run+0x86/0xc0 [ 3006.729379] [] do_exit+0x323/0xc40 [ 3006.735672] [] do_group_exit+0x4c/0xc0 [ 3006.742371] [] get_signal+0x345/0x940 [ 3006.748958] [] do_signal+0x37/0x700 [ 3006.755328] [] ? poll_select_set_timeout+0x5a/0x90 [ 3006.763146] [] ? __audit_syscall_exit+0x1db/0x260 [ 3006.770853] [] ? rcu_read_lock_sched_held+0x93/0xa0 [ 3006.778765] [] ? kfree+0x1e4/0x2a0 [ 3006.784986] [] ? exit_to_usermode_loop+0x33/0xac [ 3006.792551] [] exit_to_usermode_loop+0x5e/0xac [ 3006.799907] [] do_syscall_64+0x12a/0x190 [ 3006.806664] [] entry_SYSCALL64_slow_path+0x25/0x25 [ 3006.814396] Code: 24 08 44 89 44 24 10 89 4c 24 18 e8 a8 d8 ff ff 48 85 c0 8b 4c 24 18 44 8b 44 24 10 44 8b 4c 24 08 4c 8b 14 24 0f 84 30 08 00 00 ff 80 98 01 00 00 8b 3d 48 ad be 01 45 8b a2 90 0b 00 00 85 [ 3006.837158] RIP [] __lock_acquire+0xb3/0x19e0 [ 3006.844401] RSP [ 3006.851170] ---[ end trace b7b9f21cf06c27df ]--- [ 3006.927420] Kernel panic - not syncing: Fatal exception [ 3006.933954] Kernel Offset: disabled [ 3006.940961] ---[ end Kernel panic - not syncing: Fatal exception [ 3006.948249] ------------[ cut here ]------------ Fixes: 3faa3d9a308e ("IB/hfi1: Make use of mm consistent") Reviewed-by: Dean Luick Signed-off-by: Ira Weiny Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/file_ops.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index ed76be39b20b..7e03ccd2554d 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -183,6 +183,7 @@ static int hfi1_file_open(struct inode *inode, struct file *fp) if (fd) { fd->rec_cpu_num = -1; /* no cpu affinity by default */ fd->mm = current->mm; + atomic_inc(&fd->mm->mm_count); } fp->private_data = fd; @@ -779,6 +780,7 @@ static int hfi1_file_close(struct inode *inode, struct file *fp) mutex_unlock(&hfi1_mutex); hfi1_free_ctxtdata(dd, uctxt); done: + mmdrop(fdata->mm); kobject_put(&dd->kobj); kfree(fdata); return 0; -- cgit v1.3-18-gd494 From 7f446abf12d741f4e29f00c633cb5fa67c2eee71 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 19 Aug 2016 07:29:07 -0700 Subject: iw_cxgb4: limit IRD/ORD advertised to ULP by device max. The i40iw initiator sends an MPA-request with ird = 63, ord = 63. The cxgb4 responder sends a RST. Since the inbound ord=63 and it exceeds the max_ird/c4iw_max_read_depth (=32 default), chelsio decides to abort. Instead, cxgb4 should adjust the ord/ird down before presenting it to the ULP. Reported-by: Shiraz Saleem Signed-off-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 3aca7f6171b4..a698efc69257 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1827,8 +1827,12 @@ static int process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb) (ep->mpa_pkt + sizeof(*mpa)); ep->ird = ntohs(mpa_v2_params->ird) & MPA_V2_IRD_ORD_MASK; + ep->ird = min_t(u32, ep->ird, + cur_max_read_depth(ep->com.dev)); ep->ord = ntohs(mpa_v2_params->ord) & MPA_V2_IRD_ORD_MASK; + ep->ord = min_t(u32, ep->ord, + cur_max_read_depth(ep->com.dev)); PDBG("%s initiator ird %u ord %u\n", __func__, ep->ird, ep->ord); if (ntohs(mpa_v2_params->ird) & MPA_V2_PEER2PEER_MODEL) -- cgit v1.3-18-gd494 From 30b03b1528b60623986ee0b50ec0e5dab9094be8 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 19 Aug 2016 07:29:08 -0700 Subject: iw_cxgb4: use the MPA initiator's IRD if < our ORD The i40iw initiator sends an MPA-request with ird=16 and ord=16. The cxgb4 responder sends an MPA-reply with ord = 32 causing i40iw to terminate due to insufficient resources. The logic to reduce the ORD to <= peer's IRD was wrong. Reported-by: Shiraz Saleem Signed-off-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index a698efc69257..b6a953aed7e8 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -3140,7 +3140,7 @@ int c4iw_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) { if (conn_param->ord > ep->ird) { if (RELAXED_IRD_NEGOTIATION) { - ep->ord = ep->ird; + conn_param->ord = ep->ird; } else { ep->ird = conn_param->ird; ep->ord = conn_param->ord; -- cgit v1.3-18-gd494 From 5cab4d84780573afbf5077ae9c3f919b4f305f20 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 22 Aug 2016 13:49:59 -0700 Subject: Input: silead - use devm_gpiod_get The silead code is using devm_foo for everything (and does not free any resources). Except that it is using gpiod_get instead of devm_gpiod_get (but is not freeing the gpio_desc), change this to use devm_gpiod_get so that the gpio will be properly released. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 7379fe153cf9..b2744a64e933 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -464,7 +464,7 @@ static int silead_ts_probe(struct i2c_client *client, return -ENODEV; /* Power GPIO pin */ - data->gpio_power = gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); + data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW); if (IS_ERR(data->gpio_power)) { if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER) dev_err(dev, "Shutdown GPIO request failed\n"); -- cgit v1.3-18-gd494 From fae16989be77b09bab86c79233e4b511ea769cea Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 22 Aug 2016 13:25:56 -0700 Subject: Input: tegra-kbc - fix inverted reset logic Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") Signed-off-by: Masahiro Yamada Acked-by: Thierry Reding Acked-by: Laxman Dewangan Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tegra-kbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index 7d61439be5f2..0c07e1023a46 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -376,7 +376,7 @@ static int tegra_kbc_start(struct tegra_kbc *kbc) /* Reset the KBC controller to clear all previous status.*/ reset_control_assert(kbc->rst); udelay(100); - reset_control_assert(kbc->rst); + reset_control_deassert(kbc->rst); udelay(100); tegra_kbc_config_pins(kbc); -- cgit v1.3-18-gd494 From 3e29d6bb6433ebfa4e187b1164b80baf720d58c3 Mon Sep 17 00:00:00 2001 From: Andrew Duggan Date: Mon, 22 Aug 2016 11:28:11 -0700 Subject: Input: synaptics-rmi4 - fix register descriptor subpacket map construction The map_offset variable is specific to the register and needs to be reset in the loop. Otherwise, subsequent register's subpacket maps will have their bits set at the wrong index. Signed-off-by: Andrew Duggan Tested-by: Nitin Chaudhary Reviewed-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index faa295ec4f31..c83bce89028b 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -553,7 +553,6 @@ int rmi_read_register_desc(struct rmi_device *d, u16 addr, goto free_struct_buff; reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS); - map_offset = 0; for (i = 0; i < rdesc->num_registers; i++) { struct rmi_register_desc_item *item = &rdesc->registers[i]; int reg_size = struct_buf[offset]; @@ -576,6 +575,8 @@ int rmi_read_register_desc(struct rmi_device *d, u16 addr, item->reg = reg; item->reg_size = reg_size; + map_offset = 0; + do { for (b = 0; b < 7; b++) { if (struct_buf[offset] & (0x1 << b)) -- cgit v1.3-18-gd494 From e3a888a4bff0bef0b256d55c58bc32c99fb44ece Mon Sep 17 00:00:00 2001 From: Petr Cvek Date: Fri, 19 Aug 2016 10:14:29 -0700 Subject: Input: ads7846 - remove redundant regulator_disable call ADS7846 regulator is disabled twice in a row in ads7846_remove(). Valid one is in ads7846_disable(). Removing the ads7846 module causes warning about unbalanced disables. ... WARNING: CPU: 0 PID: 29269 at drivers/regulator/core.c:2251 _regulator_disable+0xf8/0x130 unbalanced disables for vads7846 CPU: 0 PID: 29269 Comm: rmmod Tainted: G D W 4.7.0+ #3 Hardware name: HTC Magician ... show_stack+0x10/0x14 __warn+0xd8/0x100 warn_slowpath_fmt+0x38/0x48 _regulator_disable+0xf8/0x130 regulator_disable+0x34/0x60 ads7846_remove+0x58/0xd4 [ads7846] spi_drv_remove+0x1c/0x34 __device_release_driver+0x84/0x114 driver_detach+0x8c/0x90 bus_remove_driver+0x5c/0xc8 SyS_delete_module+0x1a0/0x238 ret_fast_syscall+0x0/0x38 Signed-off-by: Petr Cvek Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index a61b2153ab8c..1ce3ecbe37f8 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1473,7 +1473,6 @@ static int ads7846_remove(struct spi_device *spi) ads784x_hwmon_unregister(spi, ts); - regulator_disable(ts->reg); regulator_put(ts->reg); if (!ts->get_pendown_state) { -- cgit v1.3-18-gd494 From 4870e704d901602e4ae5de462c4e65732cf2ed6c Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 22 Aug 2016 12:03:29 +0300 Subject: qed: FLR of active VFs might lead to FW assert Driver never bothered marking the VF's vport with the VF's sw_fid. As a result, FLR flows are not going to clean those vports. If the vport was active when FLRed, re-activating it would lead to a FW assertion. Fixes: dacd88d6f6851 ("qed: IOV l2 functionality") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h index 35e53771533f..45ab74676573 100644 --- a/drivers/net/ethernet/qlogic/qed/qed.h +++ b/drivers/net/ethernet/qlogic/qed/qed.h @@ -561,9 +561,18 @@ struct qed_dev { static inline u8 qed_concrete_to_sw_fid(struct qed_dev *cdev, u32 concrete_fid) { + u8 vfid = GET_FIELD(concrete_fid, PXP_CONCRETE_FID_VFID); u8 pfid = GET_FIELD(concrete_fid, PXP_CONCRETE_FID_PFID); + u8 vf_valid = GET_FIELD(concrete_fid, + PXP_CONCRETE_FID_VFVALID); + u8 sw_fid; - return pfid; + if (vf_valid) + sw_fid = vfid + MAX_NUM_PFS; + else + sw_fid = pfid; + + return sw_fid; } #define PURE_LB_TC 8 -- cgit v1.3-18-gd494 From 486095fae3a8a6b1ae07c51844699d9bd5cfbebc Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 23 Aug 2016 13:58:25 +0800 Subject: pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33 PG8, PG9 is said to be the CTS/RTS pins for UART1 according to the A23/33 datasheets. However, the function is wrongly named "uart2" in the pinctrl driver. This patch fixes this by modifying them to be named "uart1". Cc: stable@vger.kernel.org Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 4 ++-- drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c index ce483b03a263..f9d661e5c14a 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c @@ -485,12 +485,12 @@ static const struct sunxi_desc_pin sun8i_a23_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "uart2"), /* RTS */ + SUNXI_FUNCTION(0x2, "uart1"), /* RTS */ SUNXI_FUNCTION_IRQ_BANK(0x4, 2, 8)), /* PG_EINT8 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "uart2"), /* CTS */ + SUNXI_FUNCTION(0x2, "uart1"), /* CTS */ SUNXI_FUNCTION_IRQ_BANK(0x4, 2, 9)), /* PG_EINT9 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10), SUNXI_FUNCTION(0x0, "gpio_in"), diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c index 3040abe6f73a..3131cac2b76f 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c @@ -407,12 +407,12 @@ static const struct sunxi_desc_pin sun8i_a33_pins[] = { SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 8), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "uart2"), /* RTS */ + SUNXI_FUNCTION(0x2, "uart1"), /* RTS */ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 8)), /* PG_EINT8 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 9), SUNXI_FUNCTION(0x0, "gpio_in"), SUNXI_FUNCTION(0x1, "gpio_out"), - SUNXI_FUNCTION(0x2, "uart2"), /* CTS */ + SUNXI_FUNCTION(0x2, "uart1"), /* CTS */ SUNXI_FUNCTION_IRQ_BANK(0x4, 1, 9)), /* PG_EINT9 */ SUNXI_PIN(SUNXI_PINCTRL_PIN(G, 10), SUNXI_FUNCTION(0x0, "gpio_in"), -- cgit v1.3-18-gd494 From 6c73358c83ce870c0cf32413e5cadb3b9a39c606 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 22 Aug 2016 16:58:53 -0400 Subject: USB: fix typo in wMaxPacketSize validation The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 051163189810..15ce4ab11688 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -187,7 +187,7 @@ static const unsigned short high_speed_maxpacket_maxes[4] = { [USB_ENDPOINT_XFER_CONTROL] = 64, [USB_ENDPOINT_XFER_ISOC] = 1024, [USB_ENDPOINT_XFER_BULK] = 512, - [USB_ENDPOINT_XFER_INT] = 1023, + [USB_ENDPOINT_XFER_INT] = 1024, }; static const unsigned short super_speed_maxpacket_maxes[4] = { [USB_ENDPOINT_XFER_CONTROL] = 512, -- cgit v1.3-18-gd494 From a77ec83a57890240c546df00ca5df1cdeedb1cc3 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Mon, 6 Jun 2016 18:07:59 -0400 Subject: vhost/scsi: fix reuse of &vq->iov[out] in response The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141a487 ("vhost/scsi: Convert completion path to use copy_to_iter") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington Signed-off-by: Michael S. Tsirkin --- drivers/vhost/scsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index 9d6320e8ff3e..6e29d053843d 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -88,7 +88,7 @@ struct vhost_scsi_cmd { struct scatterlist *tvc_prot_sgl; struct page **tvc_upages; /* Pointer to response header iovec */ - struct iovec *tvc_resp_iov; + struct iovec tvc_resp_iov; /* Pointer to vhost_scsi for our device */ struct vhost_scsi *tvc_vhost; /* Pointer to vhost_virtqueue for the cmd */ @@ -547,7 +547,7 @@ static void vhost_scsi_complete_cmd_work(struct vhost_work *work) memcpy(v_rsp.sense, cmd->tvc_sense_buf, se_cmd->scsi_sense_length); - iov_iter_init(&iov_iter, READ, cmd->tvc_resp_iov, + iov_iter_init(&iov_iter, READ, &cmd->tvc_resp_iov, cmd->tvc_in_iovs, sizeof(v_rsp)); ret = copy_to_iter(&v_rsp, sizeof(v_rsp), &iov_iter); if (likely(ret == sizeof(v_rsp))) { @@ -1044,7 +1044,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) } cmd->tvc_vhost = vs; cmd->tvc_vq = vq; - cmd->tvc_resp_iov = &vq->iov[out]; + cmd->tvc_resp_iov = vq->iov[out]; cmd->tvc_in_iovs = in; pr_debug("vhost_scsi got command opcode: %#02x, lun: %d\n", -- cgit v1.3-18-gd494 From 48ef5865d08fa0a36d786f2f8e12c6194d27538b Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Fri, 19 Aug 2016 08:50:23 +0200 Subject: IB/qib: Use memdup_user() rather than duplicating its implementation Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qib/qib_fs.c | 26 +++++--------------------- 1 file changed, 5 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c index fcdf37913a26..c3edc033f7c4 100644 --- a/drivers/infiniband/hw/qib/qib_fs.c +++ b/drivers/infiniband/hw/qib/qib_fs.c @@ -328,26 +328,12 @@ static ssize_t flash_write(struct file *file, const char __user *buf, pos = *ppos; - if (pos != 0) { - ret = -EINVAL; - goto bail; - } - - if (count != sizeof(struct qib_flash)) { - ret = -EINVAL; - goto bail; - } - - tmp = kmalloc(count, GFP_KERNEL); - if (!tmp) { - ret = -ENOMEM; - goto bail; - } + if (pos != 0 || count != sizeof(struct qib_flash)) + return -EINVAL; - if (copy_from_user(tmp, buf, count)) { - ret = -EFAULT; - goto bail_tmp; - } + tmp = memdup_user(buf, count); + if (IS_ERR(tmp)) + return PTR_ERR(tmp); dd = private2dd(file); if (qib_eeprom_write(dd, pos, tmp, count)) { @@ -361,8 +347,6 @@ static ssize_t flash_write(struct file *file, const char __user *buf, bail_tmp: kfree(tmp); - -bail: return ret; } -- cgit v1.3-18-gd494 From 6c7d46fdb8165ece4b0a17fb8f0b9320dbfeffc2 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Mon, 22 Aug 2016 18:09:14 -0500 Subject: i40iw: Change mem_resources pointer to a u8 iwdev->mem_resources is incorrectly defined as an unsigned long instead of u8. As a result, the offset into the dynamic allocated structures in i40iw_initialize_hw_resources() is incorrectly calculated and would lead to writing of memory regions outside of the allocated buffer. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index b738acdb9b02..882f3ef2e4c7 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -232,7 +232,7 @@ struct i40iw_device { struct i40e_client *client; struct i40iw_hw hw; struct i40iw_cm_core cm_core; - unsigned long *mem_resources; + u8 *mem_resources; unsigned long *allocated_qps; unsigned long *allocated_cqs; unsigned long *allocated_mrs; -- cgit v1.3-18-gd494 From 44856be3e95c87f03e850ef4fdf8c0503c2dde18 Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Mon, 22 Aug 2016 18:15:58 -0500 Subject: i40iw: Protect req_resource_num update In i40iw_alloc_resource(), ensure that the update to req_resource_num is protected by the lock. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw.h b/drivers/infiniband/hw/i40iw/i40iw.h index 882f3ef2e4c7..8ec09e470f84 100644 --- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -435,8 +435,8 @@ static inline int i40iw_alloc_resource(struct i40iw_device *iwdev, *next = resource_num + 1; if (*next == max_resources) *next = 0; - spin_unlock_irqrestore(&iwdev->resource_lock, flags); *req_resource_num = resource_num; + spin_unlock_irqrestore(&iwdev->resource_lock, flags); return 0; } -- cgit v1.3-18-gd494 From faa739fb5df56aadab96bcd2f6eb3486cc3a3aec Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Mon, 22 Aug 2016 18:17:12 -0500 Subject: i40iw: Add missing check for interface already open In i40iw_open(), check if interface is already open and return success if it is. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_main.c b/drivers/infiniband/hw/i40iw/i40iw_main.c index 6e9081380a27..0cbbe4038298 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_main.c +++ b/drivers/infiniband/hw/i40iw/i40iw_main.c @@ -1558,6 +1558,10 @@ static int i40iw_open(struct i40e_info *ldev, struct i40e_client *client) enum i40iw_status_code status; struct i40iw_handler *hdl; + hdl = i40iw_find_netdev(ldev->netdev); + if (hdl) + return 0; + hdl = kzalloc(sizeof(*hdl), GFP_KERNEL); if (!hdl) return -ENOMEM; -- cgit v1.3-18-gd494 From cff069b78c21559f427c3fefe9ef3294e3dec094 Mon Sep 17 00:00:00 2001 From: Bharat Potnuri Date: Tue, 23 Aug 2016 20:27:33 +0530 Subject: iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for request completion notification on a CQ. Due to this ib_poll_handler() assumes all events polled and avoids further iopoll scheduling. This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if CQ is not empty and return accordingly. Based on the return value of ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of iopoll handler. Signed-off-by: Potnuri Bharat Teja Reviewed-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cq.c | 10 +++++----- drivers/infiniband/hw/cxgb4/t4.h | 5 +++++ 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 812ab7278b8e..ac926c942fee 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -1016,15 +1016,15 @@ int c4iw_resize_cq(struct ib_cq *cq, int cqe, struct ib_udata *udata) int c4iw_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags) { struct c4iw_cq *chp; - int ret; + int ret = 0; unsigned long flag; chp = to_c4iw_cq(ibcq); spin_lock_irqsave(&chp->lock, flag); - ret = t4_arm_cq(&chp->cq, - (flags & IB_CQ_SOLICITED_MASK) == IB_CQ_SOLICITED); + t4_arm_cq(&chp->cq, + (flags & IB_CQ_SOLICITED_MASK) == IB_CQ_SOLICITED); + if (flags & IB_CQ_REPORT_MISSED_EVENTS) + ret = t4_cq_notempty(&chp->cq); spin_unlock_irqrestore(&chp->lock, flag); - if (ret && !(flags & IB_CQ_REPORT_MISSED_EVENTS)) - ret = 0; return ret; } diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h index 6126bbe36095..02173f4315fa 100644 --- a/drivers/infiniband/hw/cxgb4/t4.h +++ b/drivers/infiniband/hw/cxgb4/t4.h @@ -634,6 +634,11 @@ static inline int t4_valid_cqe(struct t4_cq *cq, struct t4_cqe *cqe) return (CQE_GENBIT(cqe) == cq->gen); } +static inline int t4_cq_notempty(struct t4_cq *cq) +{ + return cq->sw_in_use || t4_valid_cqe(cq, &cq->queue[cq->cidx]); +} + static inline int t4_next_hw_cqe(struct t4_cq *cq, struct t4_cqe **cqe) { int ret; -- cgit v1.3-18-gd494 From 543852af8e5902aee8f7c72c89e1513663e0f696 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Wed, 27 Jul 2016 22:24:04 +0800 Subject: iio: adc: rockchip_saradc: reset saradc controller before programming it SARADC controller needs to be reset before programming it, otherwise it will not function properly. Signed-off-by: Caesar Wang Cc: Jonathan Cameron Cc: Heiko Stuebner Cc: Rob Herring Cc: linux-iio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Tested-by: Guenter Roeck Cc: Signed-off-by: Jonathan Cameron --- .../bindings/iio/adc/rockchip-saradc.txt | 7 +++++ drivers/iio/adc/Kconfig | 1 + drivers/iio/adc/rockchip_saradc.c | 30 ++++++++++++++++++++++ 3 files changed, 38 insertions(+) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt index bf99e2f24788..205593f56fe7 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt @@ -16,6 +16,11 @@ Required properties: - vref-supply: The regulator supply ADC reference voltage. - #io-channel-cells: Should be 1, see ../iio-bindings.txt +Optional properties: +- resets: Must contain an entry for each entry in reset-names if need support + this option. See ../reset/reset.txt for details. +- reset-names: Must include the name "saradc-apb". + Example: saradc: saradc@2006c000 { compatible = "rockchip,saradc"; @@ -23,6 +28,8 @@ Example: interrupts = ; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; #io-channel-cells = <1>; vref-supply = <&vcc18>; }; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 1de31bdd4ce4..767577298ee3 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -389,6 +389,7 @@ config QCOM_SPMI_VADC config ROCKCHIP_SARADC tristate "Rockchip SARADC driver" depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST) + depends on RESET_CONTROLLER help Say yes here to build support for the SARADC found in SoCs from Rockchip. diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c index f9ad6c2d6821..85d701291654 100644 --- a/drivers/iio/adc/rockchip_saradc.c +++ b/drivers/iio/adc/rockchip_saradc.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include @@ -53,6 +55,7 @@ struct rockchip_saradc { struct clk *clk; struct completion completion; struct regulator *vref; + struct reset_control *reset; const struct rockchip_saradc_data *data; u16 last_val; }; @@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = { }; MODULE_DEVICE_TABLE(of, rockchip_saradc_match); +/** + * Reset SARADC Controller. + */ +static void rockchip_saradc_reset_controller(struct reset_control *reset) +{ + reset_control_assert(reset); + usleep_range(10, 20); + reset_control_deassert(reset); +} + static int rockchip_saradc_probe(struct platform_device *pdev) { struct rockchip_saradc *info = NULL; @@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev) if (IS_ERR(info->regs)) return PTR_ERR(info->regs); + /* + * The reset should be an optional property, as it should work + * with old devicetrees as well + */ + info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb"); + if (IS_ERR(info->reset)) { + ret = PTR_ERR(info->reset); + if (ret != -ENOENT) + return ret; + + dev_dbg(&pdev->dev, "no reset control found\n"); + info->reset = NULL; + } + init_completion(&info->completion); irq = platform_get_irq(pdev, 0); @@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev) return PTR_ERR(info->vref); } + if (info->reset) + rockchip_saradc_reset_controller(info->reset); + /* * Use a default value for the converter clock. * This may become user-configurable in the future. -- cgit v1.3-18-gd494 From 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 23 Aug 2016 15:32:51 -0400 Subject: USB: avoid left shift by -1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern Reported-by: Vittorio Zecca Tested-by: Vittorio Zecca Suggested-by: Bjørn Mork CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e6a6d67c8705..09c8d9ca61ae 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1709,11 +1709,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->start_frame = uurb->start_frame; as->urb->number_of_packets = number_of_packets; as->urb->stream_id = stream_id; - if (uurb->type == USBDEVFS_URB_TYPE_ISO || - ps->dev->speed == USB_SPEED_HIGH) - as->urb->interval = 1 << min(15, ep->desc.bInterval - 1); - else - as->urb->interval = ep->desc.bInterval; + + if (ep->desc.bInterval) { + if (uurb->type == USBDEVFS_URB_TYPE_ISO || + ps->dev->speed == USB_SPEED_HIGH || + ps->dev->speed >= USB_SPEED_SUPER) + as->urb->interval = 1 << + min(15, ep->desc.bInterval - 1); + else + as->urb->interval = ep->desc.bInterval; + } + as->urb->context = as; as->urb->complete = async_completed; for (totlen = u = 0; u < number_of_packets; u++) { -- cgit v1.3-18-gd494 From b323431bc017e9862870cbbac004774c769ee112 Mon Sep 17 00:00:00 2001 From: Zefir Kurtisi Date: Mon, 22 Aug 2016 15:56:38 +0200 Subject: gianfar: prevent fragmentation in DSA environments The eTSEC register MRBLR defines the maximum space in the RX buffers and is set to 1536 by gianfar. This reasonably covers the common use case where the MTU is kept at default 1500. In that case, the largest Ethernet frame size of 1518 plus an optional GMAC_FCB_LEN of 8, and an additional padding of 8 to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534 and nicely fit within the chosen MRBLR. Alas, if the eTSEC is attached to a DSA enabled switch, the (E)DSA header extension (4 or 8 bytes) causes every maximum sized frame to be fragmented by the hardware. This patch increases the maximum RX buffer size by 8 and rounds up to the next multiple of 64, which the hardware's defines as RX buffer granularity. Signed-off-by: Zefir Kurtisi Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h index 373fd094f2f3..6e8a9c8467b9 100644 --- a/drivers/net/ethernet/freescale/gianfar.h +++ b/drivers/net/ethernet/freescale/gianfar.h @@ -100,7 +100,8 @@ extern const char gfar_driver_version[]; #define DEFAULT_RX_LFC_THR 16 #define DEFAULT_LFC_PTVVAL 4 -#define GFAR_RXB_SIZE 1536 +/* prevent fragmenation by HW in DSA environments */ +#define GFAR_RXB_SIZE roundup(1536 + 8, 64) #define GFAR_SKBFRAG_SIZE (RXBUF_ALIGNMENT + GFAR_RXB_SIZE \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) #define GFAR_RXB_TRUESIZE 2048 -- cgit v1.3-18-gd494 From 6c389fc931bcda88940c809f752ada6d7799482c Mon Sep 17 00:00:00 2001 From: Zefir Kurtisi Date: Mon, 22 Aug 2016 15:58:12 +0200 Subject: gianfar: fix size of scatter-gathered frames The current scatter-gather logic in gianfar is flawed, since it does not consider the eTSEC's RxBD 'Data Length' field is context depening: for the last fragment it contains the full frame size, while fragments contain the fragment size, which equals the value written to register MRBLR. This causes data corruption as soon as the hardware starts to fragment receiving frames. As a result, the size of fragmented frames is increased by (nr_frags - 1) * MRBLR We first noticed this issue working with DSA, where an ICMP request sized 1472 bytes causes the scatter-gather logic to kick in. The full Ethernet frame (1518) gets increased by DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER (priv->padding=8) to a total of 1538 octets, which is fragmented by the hardware and reconstructed by the driver to a 3074 octet frame. This patch fixes the problem by adjusting the size of the last fragment. It was tested by setting MRBLR to different multiples of 64, proving correct scatter-gather operation on frames with up to 9000 octets in size. Signed-off-by: Zefir Kurtisi Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index d20935dc8399..4b4f5bc0e279 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2922,17 +2922,25 @@ static bool gfar_add_rx_frag(struct gfar_rx_buff *rxb, u32 lstatus, { unsigned int size = lstatus & BD_LENGTH_MASK; struct page *page = rxb->page; + bool last = !!(lstatus & BD_LFLAG(RXBD_LAST)); /* Remove the FCS from the packet length */ - if (likely(lstatus & BD_LFLAG(RXBD_LAST))) + if (last) size -= ETH_FCS_LEN; - if (likely(first)) + if (likely(first)) { skb_put(skb, size); - else - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - rxb->page_offset + RXBUF_ALIGNMENT, - size, GFAR_RXB_TRUESIZE); + } else { + /* the last fragments' length contains the full frame length */ + if (last) + size -= skb->len; + + /* in case the last fragment consisted only of the FCS */ + if (size > 0) + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, + rxb->page_offset + RXBUF_ALIGNMENT, + size, GFAR_RXB_TRUESIZE); + } /* try reuse page */ if (unlikely(page_count(page) != 1)) -- cgit v1.3-18-gd494 From f64f14820e2deb5db056a05d7672ee2b1c6290e5 Mon Sep 17 00:00:00 2001 From: Xander Huff Date: Mon, 22 Aug 2016 15:57:16 -0500 Subject: phy: micrel: Reenable interrupts during resume for ksz9031 Like the ksz8081, the ksz9031 has the behavior where it will clear the interrupt enable bits when leaving power down. This takes advantage of the solution provided by f5aba91. Signed-off-by: Xander Huff Signed-off-by: Nathan Sullivan Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 053e87905b94..885ac9cbab5a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -964,7 +964,7 @@ static struct phy_driver ksphy_driver[] = { .get_strings = kszphy_get_strings, .get_stats = kszphy_get_stats, .suspend = genphy_suspend, - .resume = genphy_resume, + .resume = kszphy_resume, }, { .phy_id = PHY_ID_KSZ8873MLL, .phy_id_mask = MICREL_PHY_ID_MASK, -- cgit v1.3-18-gd494 From 1bc261fabe866c4cdc97f52319eaa0c7ee31026e Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Mon, 22 Aug 2016 22:47:08 +0100 Subject: net: mv88e6xxx: Fix ingress rate removal for mv6131 chips The PORT_RATE_CONTROL register works differently on 88e6095/6095f/6131 in comparison to 6123/61/65, and 0x0 disables. The distinction was lost Linux 4.1 --> 4.2 Signed-off-by: Jamie Lentin Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index d1d9d3cf9139..710679067594 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2656,15 +2656,19 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) return ret; } + /* Rate Control: disable ingress rate limiting. */ if (mv88e6xxx_6352_family(chip) || mv88e6xxx_6351_family(chip) || mv88e6xxx_6165_family(chip) || mv88e6xxx_6097_family(chip) || - mv88e6xxx_6185_family(chip) || mv88e6xxx_6095_family(chip) || mv88e6xxx_6320_family(chip)) { - /* Rate Control: disable ingress rate limiting. */ ret = _mv88e6xxx_reg_write(chip, REG_PORT(port), PORT_RATE_CONTROL, 0x0001); if (ret) return ret; + } else if (mv88e6xxx_6185_family(chip) || mv88e6xxx_6095_family(chip)) { + ret = _mv88e6xxx_reg_write(chip, REG_PORT(port), + PORT_RATE_CONTROL, 0x0000); + if (ret) + return ret; } /* Port Control 1: disable trunking, disable sending -- cgit v1.3-18-gd494 From 53080fe9c451e7625e71b91c384e7bef1be72b00 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 Aug 2016 09:48:20 -0300 Subject: net: lpc_eth: Check clk_prepare_enable() error clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure While at it, replace __lpc_eth_clock_enable() with a plain clk_prepare_enable/clk_disable_unprepare() call in order to simplify the code. Signed-off-by: Fabio Estevam Acked-by: Vladimir Zapolskiy Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index 4d4ecba0aad9..8e13ec84c538 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -475,14 +475,6 @@ static void __lpc_get_mac(struct netdata_local *pldat, u8 *mac) mac[5] = tmp >> 8; } -static void __lpc_eth_clock_enable(struct netdata_local *pldat, bool enable) -{ - if (enable) - clk_prepare_enable(pldat->clk); - else - clk_disable_unprepare(pldat->clk); -} - static void __lpc_params_setup(struct netdata_local *pldat) { u32 tmp; @@ -1056,7 +1048,7 @@ static int lpc_eth_close(struct net_device *ndev) writel(0, LPC_ENET_MAC2(pldat->net_base)); spin_unlock_irqrestore(&pldat->lock, flags); - __lpc_eth_clock_enable(pldat, false); + clk_disable_unprepare(pldat->clk); return 0; } @@ -1197,11 +1189,14 @@ static int lpc_eth_ioctl(struct net_device *ndev, struct ifreq *req, int cmd) static int lpc_eth_open(struct net_device *ndev) { struct netdata_local *pldat = netdev_priv(ndev); + int ret; if (netif_msg_ifup(pldat)) dev_dbg(&pldat->pdev->dev, "enabling %s\n", ndev->name); - __lpc_eth_clock_enable(pldat, true); + ret = clk_prepare_enable(pldat->clk); + if (ret) + return ret; /* Suspended PHY makes LPC ethernet core block, so resume now */ phy_resume(ndev->phydev); @@ -1320,7 +1315,9 @@ static int lpc_eth_drv_probe(struct platform_device *pdev) } /* Enable network clock */ - __lpc_eth_clock_enable(pldat, true); + ret = clk_prepare_enable(pldat->clk); + if (ret) + goto err_out_clk_put; /* Map IO space */ pldat->net_base = ioremap(res->start, resource_size(res)); @@ -1454,6 +1451,7 @@ err_out_iounmap: iounmap(pldat->net_base); err_out_disable_clocks: clk_disable_unprepare(pldat->clk); +err_out_clk_put: clk_put(pldat->clk); err_out_free_dev: free_netdev(ndev); -- cgit v1.3-18-gd494 From a8184003c0bb1d6362c2af76c560b3caae6832cb Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 23 Aug 2016 16:31:28 +0200 Subject: dwc_eth_qos: fix interrupt enable race We currently enable interrupts before we enable NAPI. If an RX interrupt hits before we enabled NAPI then the NAPI callback is never called and we leave the hardware with RX interrupts disabled, which of course leads us to never handling received packets. Fix this by moving the interrupt enable to after we've enable NAPI and the reclaim tasklet. Fixes: cd5e41234729 ("dwc_eth_qos: do phy_start before resetting hardware") Signed-off-by: Rabin Vincent Signed-off-by: Lars Persson Signed-off-by: David S. Miller --- drivers/net/ethernet/synopsys/dwc_eth_qos.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c index 9f159a775af3..5a3941bf250f 100644 --- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c +++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c @@ -1622,13 +1622,7 @@ static void dwceqos_init_hw(struct net_local *lp) DWCEQOS_MMC_CTRL_RSTONRD); dwceqos_enable_mmc_interrupt(lp); - /* Enable Interrupts */ - dwceqos_write(lp, REG_DWCEQOS_DMA_CH0_IE, - DWCEQOS_DMA_CH0_IE_NIE | - DWCEQOS_DMA_CH0_IE_RIE | DWCEQOS_DMA_CH0_IE_TIE | - DWCEQOS_DMA_CH0_IE_AIE | - DWCEQOS_DMA_CH0_IE_FBEE); - + dwceqos_write(lp, REG_DWCEQOS_DMA_CH0_IE, 0); dwceqos_write(lp, REG_DWCEQOS_MAC_IE, 0); dwceqos_write(lp, REG_DWCEQOS_MAC_CFG, DWCEQOS_MAC_CFG_IPC | @@ -1905,6 +1899,15 @@ static int dwceqos_open(struct net_device *ndev) netif_start_queue(ndev); tasklet_enable(&lp->tx_bdreclaim_tasklet); + /* Enable Interrupts -- do this only after we enable NAPI and the + * tasklet. + */ + dwceqos_write(lp, REG_DWCEQOS_DMA_CH0_IE, + DWCEQOS_DMA_CH0_IE_NIE | + DWCEQOS_DMA_CH0_IE_RIE | DWCEQOS_DMA_CH0_IE_TIE | + DWCEQOS_DMA_CH0_IE_AIE | + DWCEQOS_DMA_CH0_IE_FBEE); + return 0; } -- cgit v1.3-18-gd494 From 7b996243fab46092fb3a29c773c54be8152366e4 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Tue, 23 Aug 2016 18:22:33 -0400 Subject: tun: fix transmit timestamp support Instead of using sock_tx_timestamp, use skb_tx_timestamp to record software transmit timestamp of a packet. sock_tx_timestamp resets and overrides the tx_flags of the skb. The function is intended to be called from within the protocol layer when creating the skb, not from a device driver. This is inconsistent with other drivers and will cause issues for TCP. In TCP, we intend to sample the timestamps for the last byte for each sendmsg/sendpage. For that reason, tcp_sendmsg calls tcp_tx_timestamp only with the last skb that it generates. For example, if a 128KB message is split into two 64KB packets we want to sample the SND timestamp of the last packet. The current code in the tun driver, however, will result in sampling the SND timestamp for both packets. Also, when the last packet is split into smaller packets for retranmission (see tcp_fragment), the tun driver will record timestamps for all of the retransmitted packets and not only the last packet. Fixes: eda297729171 (tun: Support software transmit time stamping.) Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Francis Yan Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/tun.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 9c8b5bc2b9d8..6f9df375c5d4 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -894,11 +894,7 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC))) goto drop; - if (skb->sk && sk_fullsock(skb->sk)) { - sock_tx_timestamp(skb->sk, skb->sk->sk_tsflags, - &skb_shinfo(skb)->tx_flags); - sw_tx_timestamp(skb); - } + skb_tx_timestamp(skb); /* Orphan the skb - required as we might hang on to it * for indefinite time. -- cgit v1.3-18-gd494 From aa8c0f1ad7e862147f4efb32bbb71ff66eb38caa Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Tue, 23 Aug 2016 23:19:29 +0800 Subject: clocksource/drivers/pxa: Fix include files for compilation We get 1 warning about global functions without a declaration in the clocksource/drivers/pxa driver when building with W=1: drivers/clocksource/pxa_timer.c:221:13: warning: no previous prototype for 'pxa_timer_nodt_init' [-Wmissing-prototypes] void __init pxa_timer_nodt_init(int irq, void __iomem *base, In fact, this function is declared in pxa.h, so this patch add missing header dependencies. Signed-off-by: Baoyou Xie Reviewed-by: Arnd Bergmann Cc: daniel.lezcano@linaro.org Cc: xie.baoyou@zte.com.cn Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1471965569-4104-1-git-send-email-baoyou.xie@linaro.org Signed-off-by: Thomas Gleixner --- drivers/clocksource/pxa_timer.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c index 937e10b84d58..3e1cb512f3ce 100644 --- a/drivers/clocksource/pxa_timer.c +++ b/drivers/clocksource/pxa_timer.c @@ -21,6 +21,8 @@ #include #include +#include + #include #define OSMR0 0x00 /* OS Timer 0 Match Register */ -- cgit v1.3-18-gd494 From b70cd2de0ea85f5ab51a1d01893cba6415011b9d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Wed, 24 Aug 2016 14:11:30 +0300 Subject: spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices Slave devices are not enumerated by ACPI data because the ACPI handle for the core driver is NULL if it was enumerated by PCI. Propagate firmware node handle of the PCI device to the platform device. Suggested-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx-pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index f3df522db93b..58d2d48e16a5 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -214,6 +214,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev, return PTR_ERR(ssp->clk); memset(&pi, 0, sizeof(pi)); + pi.fwnode = dev->dev.fwnode; pi.parent = &dev->dev; pi.name = "pxa2xx-spi"; pi.id = ssp->port_id; -- cgit v1.3-18-gd494 From 40d9c32525cba79130612650b1abc47c0c0f19a8 Mon Sep 17 00:00:00 2001 From: Aleksandr Makarov Date: Wed, 24 Aug 2016 13:06:22 +0300 Subject: USB: serial: option: add WeTelecom 0x6802 and 0x6803 products These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by: Aleksandr Makarov Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bb6a71120c03..9894e341c6ac 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -528,6 +528,8 @@ static void option_instat_callback(struct urb *urb); /* WeTelecom products */ #define WETELECOM_VENDOR_ID 0x22de #define WETELECOM_PRODUCT_WMD200 0x6801 +#define WETELECOM_PRODUCT_6802 0x6802 +#define WETELECOM_PRODUCT_WMD300 0x6803 struct option_blacklist_info { /* bitmask of interface numbers blacklisted for send_setup */ @@ -1996,6 +1998,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.3-18-gd494 From f74bdd4cb5d0d4c3e89919e850e0bbb8789f32f9 Mon Sep 17 00:00:00 2001 From: Fabian Frederick Date: Tue, 16 Aug 2016 21:49:45 +0200 Subject: hwrng: mxc-rnga - Fix Kconfig dependency We can directly depend on SOC_IMX31 since commit c9ee94965dce ("ARM: imx: deconstruct mxc_rnga initialization") Since that commit, CONFIG_HW_RANDOM_MXC_RNGA could not be switched on with unknown symbol ARCH_HAS_RNGA and mxc-rnga.o can't be generated with ARCH=arm make M=drivers/char/hw_random Previously, HW_RANDOM_MXC_RNGA required ARCH_HAS_RNGA which was based on IMX_HAVE_PLATFORM_MXC_RNGA && ARCH_MXC. IMX_HAVE_PLATFORM_MXC_RNGA was based on SOC_IMX31. Fixes: c9ee94965dce ("ARM: imx: deconstruct mxc_rnga initialization") Signed-off-by: Fabian Frederick Acked-by: Arnd Bergmann Signed-off-by: Herbert Xu --- drivers/char/hw_random/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 56ad5a5936a9..8c0770bf8881 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -244,7 +244,7 @@ config HW_RANDOM_TX4939 config HW_RANDOM_MXC_RNGA tristate "Freescale i.MX RNGA Random Number Generator" - depends on ARCH_HAS_RNGA + depends on SOC_IMX31 default HW_RANDOM ---help--- This driver provides kernel-side support for the Random Number -- cgit v1.3-18-gd494 From 10bb087ce381c812cd81a65ffd5e6f83e6399291 Mon Sep 17 00:00:00 2001 From: Giovanni Cabiddu Date: Thu, 18 Aug 2016 19:53:36 +0100 Subject: crypto: qat - fix aes-xts key sizes Increase value of supported key sizes for qat_aes_xts. aes-xts keys consists of keys of equal size concatenated. Fixes: def14bfaf30d ("crypto: qat - add support for ctr(aes) and xts(aes)") Cc: stable@vger.kernel.org Reported-by: Wenqian Yu Signed-off-by: Giovanni Cabiddu Signed-off-by: Herbert Xu --- drivers/crypto/qat/qat_common/qat_algs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/qat/qat_common/qat_algs.c b/drivers/crypto/qat/qat_common/qat_algs.c index 769148dbaeb3..20f35df8a01f 100644 --- a/drivers/crypto/qat/qat_common/qat_algs.c +++ b/drivers/crypto/qat/qat_common/qat_algs.c @@ -1260,8 +1260,8 @@ static struct crypto_alg qat_algs[] = { { .setkey = qat_alg_ablkcipher_xts_setkey, .decrypt = qat_alg_ablkcipher_decrypt, .encrypt = qat_alg_ablkcipher_encrypt, - .min_keysize = AES_MIN_KEY_SIZE, - .max_keysize = AES_MAX_KEY_SIZE, + .min_keysize = 2 * AES_MIN_KEY_SIZE, + .max_keysize = 2 * AES_MAX_KEY_SIZE, .ivsize = AES_BLOCK_SIZE, }, }, -- cgit v1.3-18-gd494 From 901d3d4fee83e9407d91e7178048e2fed6c91f6b Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Wed, 24 Aug 2016 15:34:40 +0800 Subject: crypto: vmx - fix null dereference in p8_aes_xts_crypt walk.iv is not assigned a value in blkcipher_walk_init. It makes iv uninitialized. It is possibly a null value(as shown below), which is then used by aes_p8_encrypt. This patch moves iv = walk.iv after blkcipher_walk_virt, in which walk.iv is set. [17856.268050] Unable to handle kernel paging request for data at address 0x00000000 [17856.268212] Faulting instruction address: 0xd000000002ff04bc 7:mon> t [link register ] d000000002ff47b8 p8_aes_xts_crypt+0x168/0x2a0 [vmx_crypto] (938) [c000000013b77960] d000000002ff4794 p8_aes_xts_crypt+0x144/0x2a0 [vmx_crypto] (unreliable) [c000000013b77a70] c000000000544d64 skcipher_decrypt_blkcipher+0x64/0x80 [c000000013b77ac0] d000000003c0175c crypt_convert+0x53c/0x620 [dm_crypt] [c000000013b77ba0] d000000003c043fc kcryptd_crypt+0x3cc/0x440 [dm_crypt] [c000000013b77c50] c0000000000f3070 process_one_work+0x1e0/0x590 [c000000013b77ce0] c0000000000f34c8 worker_thread+0xa8/0x660 [c000000013b77d80] c0000000000fc0b0 kthread+0x110/0x130 [c000000013b77e30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c Signed-off-by: Li Zhong Signed-off-by: Herbert Xu --- drivers/crypto/vmx/aes_xts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/aes_xts.c b/drivers/crypto/vmx/aes_xts.c index cfb25413917c..24353ec336c5 100644 --- a/drivers/crypto/vmx/aes_xts.c +++ b/drivers/crypto/vmx/aes_xts.c @@ -129,8 +129,8 @@ static int p8_aes_xts_crypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); - iv = (u8 *)walk.iv; ret = blkcipher_walk_virt(desc, &walk); + iv = walk.iv; memset(tweak, 0, AES_BLOCK_SIZE); aes_p8_encrypt(iv, tweak, &ctx->tweak_key); -- cgit v1.3-18-gd494 From 15dacf880e49ce3ecee05eb1a0c6b8e363dbacdc Mon Sep 17 00:00:00 2001 From: "mhiramat@kernel.org" Date: Mon, 15 Aug 2016 18:40:57 +0900 Subject: brcmfmac: Check rtnl_lock is locked when removing interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Check rtnl_lock is locked in brcmf_p2p_ifp_removed() by passing rtnl_locked flag. Actually the caller brcmf_del_if() checks whether the rtnl_lock is locked, but doesn't pass it to brcmf_p2p_ifp_removed(). Without this fix, wpa_supplicant goes softlockup with rtnl_lock holding (this means all other process using netlink are locked up too) e.g. [ 4495.876627] INFO: task wpa_supplicant:7307 blocked for more than 10 seconds. [ 4495.876632] Tainted: G W 4.8.0-rc1+ #8 [ 4495.876635] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4495.876638] wpa_supplicant D ffff974c647b39a0 0 7307 1 0x00000000 [ 4495.876644] ffff974c647b39a0 0000000000000000 ffff974c00000000 ffff974c7dc59c58 [ 4495.876651] ffff974c6b7417c0 ffff974c645017c0 ffff974c647b4000 ffffffff86f16c08 [ 4495.876657] ffff974c645017c0 0000000000000246 00000000ffffffff ffff974c647b39b8 [ 4495.876664] Call Trace: [ 4495.876671] [] schedule+0x3c/0x90 [ 4495.876676] [] schedule_preempt_disabled+0x15/0x20 [ 4495.876682] [] mutex_lock_nested+0x176/0x3b0 [ 4495.876686] [] ? rtnl_lock+0x17/0x20 [ 4495.876690] [] rtnl_lock+0x17/0x20 [ 4495.876720] [] brcmf_p2p_ifp_removed+0x4d/0x70 [brcmfmac] [ 4495.876741] [] brcmf_remove_interface+0x196/0x1b0 [brcmfmac] [ 4495.876760] [] brcmf_p2p_del_vif+0x111/0x220 [brcmfmac] [ 4495.876777] [] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 4495.876820] [] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 4495.876825] [] genl_family_rcv_msg+0x1b5/0x370 [ 4495.876832] [] ? trace_hardirqs_on+0xd/0x10 [ 4495.876836] [] genl_rcv_msg+0x7d/0xb0 [ 4495.876839] [] ? genl_family_rcv_msg+0x370/0x370 [ 4495.876846] [] netlink_rcv_skb+0x97/0xb0 [ 4495.876849] [] genl_rcv+0x28/0x40 [ 4495.876854] [] netlink_unicast+0x1d3/0x2f0 [ 4495.876860] [] ? netlink_unicast+0x14b/0x2f0 [ 4495.876866] [] netlink_sendmsg+0x2eb/0x3a0 [ 4495.876870] [] sock_sendmsg+0x38/0x50 [ 4495.876874] [] ___sys_sendmsg+0x27f/0x290 [ 4495.876882] [] ? mntput_no_expire+0x5/0x3f0 [ 4495.876888] [] ? mntput_no_expire+0x8e/0x3f0 [ 4495.876894] [] ? mntput_no_expire+0x5/0x3f0 [ 4495.876899] [] ? mntput+0x24/0x40 [ 4495.876904] [] ? __fput+0x190/0x200 [ 4495.876909] [] __sys_sendmsg+0x45/0x80 [ 4495.876914] [] SyS_sendmsg+0x12/0x20 [ 4495.876918] [] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 4495.876924] [] ? trace_hardirqs_off_caller+0x1f/0xc0 Signed-off-by: Masami Hiramatsu Acked-by: Rafał Miłecki Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 8 +++++--- drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h | 2 +- 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c index 8d16f0204985..65e8c8766441 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c @@ -743,7 +743,7 @@ static void brcmf_del_if(struct brcmf_pub *drvr, s32 bsscfgidx, * serious troublesome side effects. The p2p module will clean * up the ifp if needed. */ - brcmf_p2p_ifp_removed(ifp); + brcmf_p2p_ifp_removed(ifp, rtnl_locked); kfree(ifp); } } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c index 66f942f7448e..de19c7c92bc6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c @@ -2297,7 +2297,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) return err; } -void brcmf_p2p_ifp_removed(struct brcmf_if *ifp) +void brcmf_p2p_ifp_removed(struct brcmf_if *ifp, bool rtnl_locked) { struct brcmf_cfg80211_info *cfg; struct brcmf_cfg80211_vif *vif; @@ -2306,9 +2306,11 @@ void brcmf_p2p_ifp_removed(struct brcmf_if *ifp) vif = ifp->vif; cfg = wdev_to_cfg(&vif->wdev); cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - rtnl_lock(); + if (!rtnl_locked) + rtnl_lock(); cfg80211_unregister_wdev(&vif->wdev); - rtnl_unlock(); + if (!rtnl_locked) + rtnl_unlock(); brcmf_free_vif(vif); } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h index a3bd18c2360b..8ce9447533ef 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h @@ -155,7 +155,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg, enum brcmf_fil_p2p_if_types if_type); -void brcmf_p2p_ifp_removed(struct brcmf_if *ifp); +void brcmf_p2p_ifp_removed(struct brcmf_if *ifp, bool rtnl_locked); int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev); void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev); int brcmf_p2p_scan_prep(struct wiphy *wiphy, -- cgit v1.3-18-gd494 From b64abcb7dae6060c67ab0e548da3ef923c49641d Mon Sep 17 00:00:00 2001 From: "mhiramat@kernel.org" Date: Mon, 15 Aug 2016 18:41:12 +0900 Subject: brcmfmac: Change vif_event_lock to spinlock Change vif_event_lock to spinlock from mutex, since this lock is used in wait_event_timeout() via vif_event_equals(). This caused a warning report as below. As far as I can see, this lock protects regions where updating structure members, not function calls. Also, since those regions are not called from interrupt handlers (of course, it was a mutex), spin_lock is used instead of spin_lock_irqsave. [ 186.678550] ------------[ cut here ]------------ [ 186.678556] WARNING: CPU: 2 PID: 7140 at /home/mhiramat/ksrc/linux/kernel/sched/core.c:7545 __might_sleep+0x7c/0x80 [ 186.678560] do not call blocking ops when !TASK_RUNNING; state=2 set at [] prepare_to_wait_event+0x60/0x100 [ 186.678560] Modules linked in: brcmfmac xt_CHECKSUM rfcomm ipt_MASQUERADE nf_nat_masquerade_ipv4 xt_addrtype br_netfilter xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_raw ip6table_security ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_raw iptable_security iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_filter ip_tables x_tables bnep nls_iso8859_1 i2c_designware_platform i2c_designware_core snd_hda_codec_hdmi snd_hda_codec_realtek dcdbas snd_hda_codec_generic snd_hda_intel snd_hda_codec intel_rapl snd_hda_core x86_pkg_temp_thermal intel_powerclamp coretemp [ 186.678594] snd_pcm crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 joydev glue_helper snd_hwdep lrw gf128mul uvcvideo ablk_helper snd_seq_midi cryptd snd_seq_midi_event snd_rawmidi videobuf2_vmalloc videobuf2_memops snd_seq input_leds videobuf2_v4l2 cfg80211 videobuf2_core snd_timer videodev serio_raw btusb snd_seq_device media btrtl rtsx_pci_ms snd mei_me memstick hid_multitouch mei soundcore brcmutil idma64 virt_dma intel_lpss_pci processor_thermal_device intel_soc_dts_iosf hci_uart btbcm btqca btintel bluetooth int3403_thermal dell_smo8800 intel_lpss_acpi intel_lpss int3402_thermal int340x_thermal_zone intel_hid mac_hid int3400_thermal shpchp sparse_keymap acpi_pad acpi_thermal_rel acpi_als kfifo_buf industrialio kvm_intel kvm irqbypass parport_pc ppdev lp parport autofs4 btrfs xor raid6_pq [ 186.678631] usbhid nouveau ttm i915 rtsx_pci_sdmmc mxm_wmi i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops psmouse drm ahci rtsx_pci nvme nvme_core libahci i2c_hid hid pinctrl_sunrisepoint video wmi pinctrl_intel fjes [last unloaded: brcmfmac] [ 186.678646] CPU: 2 PID: 7140 Comm: wpa_supplicant Not tainted 4.8.0-rc1+ #8 [ 186.678647] Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016 [ 186.678648] 0000000000000000 ffff9d8c64b5b900 ffffffff98442f23 ffff9d8c64b5b950 [ 186.678651] 0000000000000000 ffff9d8c64b5b940 ffffffff9808b22b 00001d790000000d [ 186.678653] ffffffff98c75e78 000000000000026c 0000000000000000 ffff9d8c2706d058 [ 186.678655] Call Trace: [ 186.678659] [] dump_stack+0x85/0xc2 [ 186.678666] [] __warn+0xcb/0xf0 [ 186.678668] [] warn_slowpath_fmt+0x4f/0x60 [ 186.678671] [] ? prepare_to_wait_event+0x60/0x100 [ 186.678672] [] ? prepare_to_wait_event+0x60/0x100 [ 186.678674] [] __might_sleep+0x7c/0x80 [ 186.678680] [] mutex_lock_nested+0x33/0x3b0 [ 186.678682] [] ? trace_hardirqs_on+0xd/0x10 [ 186.678689] [] brcmf_cfg80211_wait_vif_event+0xcd/0x130 [brcmfmac] [ 186.678691] [] ? wake_atomic_t_function+0x60/0x60 [ 186.678697] [] brcmf_p2p_del_vif+0xf9/0x220 [brcmfmac] [ 186.678702] [] brcmf_cfg80211_del_iface+0x21b/0x270 [brcmfmac] [ 186.678716] [] nl80211_del_interface+0xfe/0x3a0 [cfg80211] [ 186.678718] [] genl_family_rcv_msg+0x1b5/0x370 [ 186.678720] [] ? trace_hardirqs_on+0xd/0x10 [ 186.678721] [] genl_rcv_msg+0x7d/0xb0 [ 186.678722] [] ? genl_family_rcv_msg+0x370/0x370 [ 186.678724] [] netlink_rcv_skb+0x97/0xb0 [ 186.678726] [] genl_rcv+0x28/0x40 [ 186.678727] [] netlink_unicast+0x1d3/0x2f0 [ 186.678729] [] ? netlink_unicast+0x14b/0x2f0 [ 186.678731] [] netlink_sendmsg+0x2eb/0x3a0 [ 186.678733] [] sock_sendmsg+0x38/0x50 [ 186.678734] [] ___sys_sendmsg+0x27f/0x290 [ 186.678737] [] ? mntput_no_expire+0x5/0x3f0 [ 186.678739] [] ? mntput_no_expire+0x8e/0x3f0 [ 186.678741] [] ? mntput_no_expire+0x5/0x3f0 [ 186.678743] [] ? mntput+0x24/0x40 [ 186.678744] [] ? __fput+0x190/0x200 [ 186.678746] [] __sys_sendmsg+0x45/0x80 [ 186.678748] [] SyS_sendmsg+0x12/0x20 [ 186.678749] [] entry_SYSCALL_64_fastpath+0x23/0xc1 [ 186.678751] [] ? trace_hardirqs_off_caller+0x1f/0xc0 [ 186.678752] ---[ end trace e224d66c5d8408b5 ]--- Signed-off-by: Masami Hiramatsu Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 26 +++++++++++----------- .../broadcom/brcm80211/brcmfmac/cfg80211.h | 2 +- 2 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 2628d5e12c64..5db56a74e7df 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5635,7 +5635,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifevent->action, ifevent->flags, ifevent->ifidx, ifevent->bsscfgidx); - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); event->action = ifevent->action; vif = event->vif; @@ -5643,7 +5643,7 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, case BRCMF_E_IF_ADD: /* waiting process may have timed out */ if (!cfg->vif_event.vif) { - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return -EBADF; } @@ -5654,24 +5654,24 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, ifp->ndev->ieee80211_ptr = &vif->wdev; SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy)); } - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); return 0; case BRCMF_E_IF_DEL: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) wake_up(&event->vif_wq); return 0; case BRCMF_E_IF_CHANGE: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); wake_up(&event->vif_wq); return 0; default: - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); break; } return -EINVAL; @@ -5792,7 +5792,7 @@ static void wl_deinit_priv(struct brcmf_cfg80211_info *cfg) static void init_vif_event(struct brcmf_cfg80211_vif_event *event) { init_waitqueue_head(&event->vif_wq); - mutex_init(&event->vif_event_lock); + spin_lock_init(&event->vif_event_lock); } static s32 brcmf_dongle_roam(struct brcmf_if *ifp) @@ -6691,9 +6691,9 @@ static inline bool vif_event_equals(struct brcmf_cfg80211_vif_event *event, { u8 evt_action; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); evt_action = event->action; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return evt_action == action; } @@ -6702,10 +6702,10 @@ void brcmf_cfg80211_arm_vif_event(struct brcmf_cfg80211_info *cfg, { struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); event->vif = vif; event->action = 0; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); } bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) @@ -6713,9 +6713,9 @@ bool brcmf_cfg80211_vif_event_armed(struct brcmf_cfg80211_info *cfg) struct brcmf_cfg80211_vif_event *event = &cfg->vif_event; bool armed; - mutex_lock(&event->vif_event_lock); + spin_lock(&event->vif_event_lock); armed = event->vif != NULL; - mutex_unlock(&event->vif_event_lock); + spin_unlock(&event->vif_event_lock); return armed; } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index 7d77f869b7f1..8889832c17e0 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -227,7 +227,7 @@ struct escan_info { */ struct brcmf_cfg80211_vif_event { wait_queue_head_t vif_wq; - struct mutex vif_event_lock; + spinlock_t vif_event_lock; u8 action; struct brcmf_cfg80211_vif *vif; }; -- cgit v1.3-18-gd494 From 87904c3e82319cf2bad8d656d79c5030dab9490e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Aug 2016 16:00:53 +0200 Subject: drm/tegra: dsi: Enhance runtime power management The MIPI DSI output on Tegra SoCs requires some external logic to calibrate the MIPI pads before a video signal can be transmitted. This MIPI calibration logic requires to be powered on while the MIPI pads are being used, which is currently done as part of the DSI driver's probe implementation. This is suboptimal because it will leave the MIPI calibration logic powered up even if the DSI output is never used. On Tegra114 and earlier this behaviour also causes the driver to hang while trying to power up the MIPI calibration logic because the power partition that contains the MIPI calibration logic will be powered on by the display controller at output pipeline configuration time. Thus the power up sequence for the MIPI calibration logic happens before it's power partition is guaranteed to be enabled. Fix this by splitting up the API into a request/free pair of functions that manage the runtime dependency between the DSI and the calibration modules (no registers are accessed) and a set of enable, calibrate and disable functions that program the MIPI calibration logic at points in time where the power partition is really enabled. While at it, make sure that the runtime power management also works in ganged mode, which is currently also broken. Reported-by: Jonathan Hunter Tested-by: Jonathan Hunter Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dsi.c | 43 ++++++++++++++++++++++++++----- drivers/gpu/host1x/mipi.c | 63 ++++++++++++++++++++++----------------------- include/linux/host1x.h | 2 ++ 3 files changed, 69 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c index 3d228ad90e0f..3dea1216bafd 100644 --- a/drivers/gpu/drm/tegra/dsi.c +++ b/drivers/gpu/drm/tegra/dsi.c @@ -840,6 +840,21 @@ static const struct drm_encoder_funcs tegra_dsi_encoder_funcs = { .destroy = tegra_output_encoder_destroy, }; +static void tegra_dsi_unprepare(struct tegra_dsi *dsi) +{ + int err; + + if (dsi->slave) + tegra_dsi_unprepare(dsi->slave); + + err = tegra_mipi_disable(dsi->mipi); + if (err < 0) + dev_err(dsi->dev, "failed to disable MIPI calibration: %d\n", + err); + + pm_runtime_put(dsi->dev); +} + static void tegra_dsi_encoder_disable(struct drm_encoder *encoder) { struct tegra_output *output = encoder_to_output(encoder); @@ -876,7 +891,26 @@ static void tegra_dsi_encoder_disable(struct drm_encoder *encoder) tegra_dsi_disable(dsi); - pm_runtime_put(dsi->dev); + tegra_dsi_unprepare(dsi); +} + +static void tegra_dsi_prepare(struct tegra_dsi *dsi) +{ + int err; + + pm_runtime_get_sync(dsi->dev); + + err = tegra_mipi_enable(dsi->mipi); + if (err < 0) + dev_err(dsi->dev, "failed to enable MIPI calibration: %d\n", + err); + + err = tegra_dsi_pad_calibrate(dsi); + if (err < 0) + dev_err(dsi->dev, "MIPI calibration failed: %d\n", err); + + if (dsi->slave) + tegra_dsi_prepare(dsi->slave); } static void tegra_dsi_encoder_enable(struct drm_encoder *encoder) @@ -887,13 +921,8 @@ static void tegra_dsi_encoder_enable(struct drm_encoder *encoder) struct tegra_dsi *dsi = to_dsi(output); struct tegra_dsi_state *state; u32 value; - int err; - - pm_runtime_get_sync(dsi->dev); - err = tegra_dsi_pad_calibrate(dsi); - if (err < 0) - dev_err(dsi->dev, "MIPI calibration failed: %d\n", err); + tegra_dsi_prepare(dsi); state = tegra_dsi_get_state(dsi); diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c index 52a6fd224127..e00809d996a2 100644 --- a/drivers/gpu/host1x/mipi.c +++ b/drivers/gpu/host1x/mipi.c @@ -242,20 +242,6 @@ struct tegra_mipi_device *tegra_mipi_request(struct device *device) dev->pads = args.args[0]; dev->device = device; - mutex_lock(&dev->mipi->lock); - - if (dev->mipi->usage_count++ == 0) { - err = tegra_mipi_power_up(dev->mipi); - if (err < 0) { - dev_err(dev->mipi->dev, - "failed to power up MIPI bricks: %d\n", - err); - return ERR_PTR(err); - } - } - - mutex_unlock(&dev->mipi->lock); - return dev; put: @@ -270,29 +256,42 @@ EXPORT_SYMBOL(tegra_mipi_request); void tegra_mipi_free(struct tegra_mipi_device *device) { - int err; + platform_device_put(device->pdev); + kfree(device); +} +EXPORT_SYMBOL(tegra_mipi_free); - mutex_lock(&device->mipi->lock); +int tegra_mipi_enable(struct tegra_mipi_device *dev) +{ + int err = 0; - if (--device->mipi->usage_count == 0) { - err = tegra_mipi_power_down(device->mipi); - if (err < 0) { - /* - * Not much that can be done here, so an error message - * will have to do. - */ - dev_err(device->mipi->dev, - "failed to power down MIPI bricks: %d\n", - err); - } - } + mutex_lock(&dev->mipi->lock); - mutex_unlock(&device->mipi->lock); + if (dev->mipi->usage_count++ == 0) + err = tegra_mipi_power_up(dev->mipi); + + mutex_unlock(&dev->mipi->lock); + + return err; - platform_device_put(device->pdev); - kfree(device); } -EXPORT_SYMBOL(tegra_mipi_free); +EXPORT_SYMBOL(tegra_mipi_enable); + +int tegra_mipi_disable(struct tegra_mipi_device *dev) +{ + int err = 0; + + mutex_lock(&dev->mipi->lock); + + if (--dev->mipi->usage_count == 0) + err = tegra_mipi_power_down(dev->mipi); + + mutex_unlock(&dev->mipi->lock); + + return err; + +} +EXPORT_SYMBOL(tegra_mipi_disable); static int tegra_mipi_wait(struct tegra_mipi *mipi) { diff --git a/include/linux/host1x.h b/include/linux/host1x.h index d2ba7d334039..1ffbf2a8cb99 100644 --- a/include/linux/host1x.h +++ b/include/linux/host1x.h @@ -304,6 +304,8 @@ struct tegra_mipi_device; struct tegra_mipi_device *tegra_mipi_request(struct device *device); void tegra_mipi_free(struct tegra_mipi_device *device); +int tegra_mipi_enable(struct tegra_mipi_device *device); +int tegra_mipi_disable(struct tegra_mipi_device *device); int tegra_mipi_calibrate(struct tegra_mipi_device *device); #endif -- cgit v1.3-18-gd494 From 9b47f77a680447e0132b2cf7fb82374e014bec1c Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 24 Aug 2016 03:52:12 -0700 Subject: nvme: Fix nvme_get/set_features() with a NULL result pointer nvme_set_features() callers seem to expect that passing NULL as the result pointer is acceptable. Teach nvme_set_features() not to try to write to the NULL address. For symmetry, make the same change to nvme_get_features(), despite the fact that all current callers pass a valid result pointer. I assume that this bug hasn't been reported in practice because the callers that pass NULL are all in the SCSI translation layer and no one uses the relevant operations. Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski Reviewed-by: Sagi Grimberg Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 7f75d661237f..2feacc70bf61 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -611,7 +611,7 @@ int nvme_get_features(struct nvme_ctrl *dev, unsigned fid, unsigned nsid, ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe, NULL, 0, 0, NVME_QID_ANY, 0, 0); - if (ret >= 0) + if (ret >= 0 && result) *result = le32_to_cpu(cqe.result); return ret; } @@ -631,7 +631,7 @@ int nvme_set_features(struct nvme_ctrl *dev, unsigned fid, unsigned dword11, ret = __nvme_submit_sync_cmd(dev->admin_q, &c, &cqe, NULL, 0, 0, NVME_QID_ANY, 0, 0); - if (ret >= 0) + if (ret >= 0 && result) *result = le32_to_cpu(cqe.result); return ret; } -- cgit v1.3-18-gd494 From 0d06108c65e572085b2d1f7c8273f417cad68734 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Sun, 14 Aug 2016 23:31:13 -0300 Subject: [media] vcodec:mediatek:code refine for v4l2 Encoder driver This patch remove unused header and define from haeder files Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 1 - drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h index 94f0a425be42..3a8e6958adae 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h @@ -23,7 +23,6 @@ #include #include -#include "mtk_vcodec_util.h" #define MTK_VCODEC_DRV_NAME "mtk_vcodec_drv" #define MTK_VCODEC_ENC_NAME "mtk-vcodec-enc" diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h index 33e890f5aa9c..12131855b46a 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h @@ -16,7 +16,6 @@ #define _MTK_VCODEC_INTR_H_ #define MTK_INST_IRQ_RECEIVED 0x1 -#define MTK_INST_WORK_THREAD_ABORT_DONE 0x2 struct mtk_vcodec_ctx; -- cgit v1.3-18-gd494 From ad34f5412d2a04a894b2cd2912538ae2e5d64e76 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Sun, 14 Aug 2016 23:47:20 -0300 Subject: [media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder This patch fix that mtk_vcodec_venc_release should be called after v4l2_m2m_ctx_release Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 7 ++++++- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 6 +++++- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c index 3ed3f2d31df5..3b0691f2deb4 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c @@ -1288,5 +1288,10 @@ int mtk_venc_lock(struct mtk_vcodec_ctx *ctx) void mtk_vcodec_enc_release(struct mtk_vcodec_ctx *ctx) { - venc_if_deinit(ctx); + int ret = venc_if_deinit(ctx); + + if (ret) + mtk_v4l2_err("venc_if_deinit failed=%d", ret); + + ctx->state = MTK_STATE_FREE; } diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c index c7806ecda2dd..5cd2151431bf 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c @@ -218,11 +218,15 @@ static int fops_vcodec_release(struct file *file) mtk_v4l2_debug(1, "[%d] encoder", ctx->id); mutex_lock(&dev->dev_mutex); + /* + * Call v4l2_m2m_ctx_release to make sure the worker thread is not + * running after venc_if_deinit. + */ + v4l2_m2m_ctx_release(ctx->m2m_ctx); mtk_vcodec_enc_release(ctx); v4l2_fh_del(&ctx->fh); v4l2_fh_exit(&ctx->fh); v4l2_ctrl_handler_free(&ctx->ctrl_hdl); - v4l2_m2m_ctx_release(ctx->m2m_ctx); list_del_init(&ctx->list); dev->num_instances--; -- cgit v1.3-18-gd494 From 91ae0e1ec6ec91cd297933886b424f9a4a8acbd4 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Mon, 15 Aug 2016 00:08:03 -0300 Subject: [media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out The original code add extra 32 line to visible_height. It is incorrect, 32 line should be add to coded_height. The purpose is that user space could calcuate real buffer size needed by using coded_width * coded_height. But this method will make v4l2-compliance test fail, since g_fmt != s_fmt(g_fmt) So remove extend visible_height or coded_height, user space should just use sizeimage to get real buffer size needed Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c index 3b0691f2deb4..9b0187ecfa6a 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c @@ -487,7 +487,6 @@ static int vidioc_venc_s_fmt_out(struct file *file, void *priv, struct mtk_q_data *q_data; int ret, i; struct mtk_video_fmt *fmt; - unsigned int pitch_w_div16; struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp; vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); @@ -530,15 +529,6 @@ static int vidioc_venc_s_fmt_out(struct file *file, void *priv, q_data->coded_width = f->fmt.pix_mp.width; q_data->coded_height = f->fmt.pix_mp.height; - pitch_w_div16 = DIV_ROUND_UP(q_data->visible_width, 16); - if (pitch_w_div16 % 8 != 0) { - /* Adjust returned width/height, so application could correctly - * allocate hw required memory - */ - q_data->visible_height += 32; - vidioc_try_fmt(f, q_data->fmt); - } - q_data->field = f->fmt.pix_mp.field; ctx->colorspace = f->fmt.pix_mp.colorspace; ctx->ycbcr_enc = f->fmt.pix_mp.ycbcr_enc; -- cgit v1.3-18-gd494 From 16060f7ef660a11f282909b01fb6096e21cf5389 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Mon, 15 Aug 2016 00:15:44 -0300 Subject: [media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder This patch add copying timestamp and timecode from src buffer to dst buffer Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 23 ++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c index 9b0187ecfa6a..0ca230e0a812 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c @@ -868,7 +868,8 @@ static int mtk_venc_encode_header(void *priv) { struct mtk_vcodec_ctx *ctx = priv; int ret; - struct vb2_buffer *dst_buf; + struct vb2_buffer *src_buf, *dst_buf; + struct vb2_v4l2_buffer *dst_vb2_v4l2, *src_vb2_v4l2; struct mtk_vcodec_mem bs_buf; struct venc_done_result enc_result; @@ -901,6 +902,15 @@ static int mtk_venc_encode_header(void *priv) mtk_v4l2_err("venc_if_encode failed=%d", ret); return -EINVAL; } + src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + if (src_buf) { + src_vb2_v4l2 = to_vb2_v4l2_buffer(src_buf); + dst_vb2_v4l2 = to_vb2_v4l2_buffer(dst_buf); + dst_buf->timestamp = src_buf->timestamp; + dst_vb2_v4l2->timecode = src_vb2_v4l2->timecode; + } else { + mtk_v4l2_err("No timestamp for the header buffer."); + } ctx->state = MTK_STATE_HEADER; dst_buf->planes[0].bytesused = enc_result.bs_size; @@ -993,7 +1003,7 @@ static void mtk_venc_worker(struct work_struct *work) struct mtk_vcodec_mem bs_buf; struct venc_done_result enc_result; int ret, i; - struct vb2_v4l2_buffer *vb2_v4l2; + struct vb2_v4l2_buffer *dst_vb2_v4l2, *src_vb2_v4l2; /* check dst_buf, dst_buf may be removed in device_run * to stored encdoe header so we need check dst_buf and @@ -1033,9 +1043,14 @@ static void mtk_venc_worker(struct work_struct *work) ret = venc_if_encode(ctx, VENC_START_OPT_ENCODE_FRAME, &frm_buf, &bs_buf, &enc_result); - vb2_v4l2 = container_of(dst_buf, struct vb2_v4l2_buffer, vb2_buf); + src_vb2_v4l2 = to_vb2_v4l2_buffer(src_buf); + dst_vb2_v4l2 = to_vb2_v4l2_buffer(dst_buf); + + dst_buf->timestamp = src_buf->timestamp; + dst_vb2_v4l2->timecode = src_vb2_v4l2->timecode; + if (enc_result.is_key_frm) - vb2_v4l2->flags |= V4L2_BUF_FLAG_KEYFRAME; + dst_vb2_v4l2->flags |= V4L2_BUF_FLAG_KEYFRAME; if (ret) { v4l2_m2m_buf_done(to_vb2_v4l2_buffer(src_buf), -- cgit v1.3-18-gd494 From 158d6071bc0aad6663109d2fe9249c3cf570d423 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Mon, 15 Aug 2016 00:26:02 -0300 Subject: [media] vcodec:mediatek: change H264 profile default to profile high This patch change default H264 profile from V4L2_MPEG_VIDEO_H264_PROFILE_MAIN to V4L2_MPEG_VIDEO_H264_PROFILE_HIGH Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c index 0ca230e0a812..2c5719ac23b2 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c @@ -1222,7 +1222,7 @@ int mtk_vcodec_enc_ctrls_setup(struct mtk_vcodec_ctx *ctx) 0, V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE); v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_MPEG_VIDEO_H264_PROFILE, V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, - 0, V4L2_MPEG_VIDEO_H264_PROFILE_MAIN); + 0, V4L2_MPEG_VIDEO_H264_PROFILE_HIGH); v4l2_ctrl_new_std_menu(handler, ops, V4L2_CID_MPEG_VIDEO_H264_LEVEL, V4L2_MPEG_VIDEO_H264_LEVEL_4_2, 0, V4L2_MPEG_VIDEO_H264_LEVEL_4_0); -- cgit v1.3-18-gd494 From 5661538749511d4c2f7d33e1e179f10c545b24d5 Mon Sep 17 00:00:00 2001 From: Christian König Date: Wed, 17 Aug 2016 13:44:20 +0200 Subject: drm/amdgpu: fix lru size grouping v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding a BO can make it the insertion point for larger sizes as well. v2: add a comment about the guard structure. Signed-off-by: Christian König Reviewed-by: Alex Deucher Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 8 ++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 8c704c86597b..700c56baf2de 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -426,6 +426,8 @@ struct amdgpu_mman { /* custom LRU management */ struct amdgpu_mman_lru log2_size[AMDGPU_TTM_LRU_SIZE]; + /* guard for log2_size array, don't add anything in between */ + struct amdgpu_mman_lru guard; }; int amdgpu_copy_buffer(struct amdgpu_ring *ring, diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 141bfcabd19c..716f2afeb6a9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -950,6 +950,8 @@ static struct list_head *amdgpu_ttm_lru_tail(struct ttm_buffer_object *tbo) struct list_head *res = lru->lru[tbo->mem.mem_type]; lru->lru[tbo->mem.mem_type] = &tbo->lru; + while ((++lru)->lru[tbo->mem.mem_type] == res) + lru->lru[tbo->mem.mem_type] = &tbo->lru; return res; } @@ -960,6 +962,8 @@ static struct list_head *amdgpu_ttm_swap_lru_tail(struct ttm_buffer_object *tbo) struct list_head *res = lru->swap_lru; lru->swap_lru = &tbo->swap; + while ((++lru)->swap_lru == res) + lru->swap_lru = &tbo->swap; return res; } @@ -1011,6 +1015,10 @@ int amdgpu_ttm_init(struct amdgpu_device *adev) lru->swap_lru = &adev->mman.bdev.glob->swap_lru; } + for (j = 0; j < TTM_NUM_MEM_TYPES; ++j) + adev->mman.guard.lru[j] = NULL; + adev->mman.guard.swap_lru = NULL; + adev->mman.initialized = true; r = ttm_bo_init_mm(&adev->mman.bdev, TTM_PL_VRAM, adev->mc.real_vram_size >> PAGE_SHIFT); -- cgit v1.3-18-gd494 From 2d683b6dad73b5636297ac4978f73f2c638a0b19 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Mon, 15 Aug 2016 00:33:32 -0300 Subject: [media] vcodec:mediatek: Refine H264 encoder driver This patch : 1. remove field and function that unused anymore 2. add support V4L2_MPEG_VIDEO_H264_LEVEL_4_2 Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c b/drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c index 9a600525b3c1..63d4be4ff327 100644 --- a/drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c +++ b/drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c @@ -61,6 +61,8 @@ enum venc_h264_bs_mode { /* * struct venc_h264_vpu_config - Structure for h264 encoder configuration + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * @input_fourcc: input fourcc * @bitrate: target bitrate (in bps) * @pic_w: picture width. Picture size is visible stream resolution, in pixels, @@ -94,13 +96,13 @@ struct venc_h264_vpu_config { /* * struct venc_h264_vpu_buf - Structure for buffer information - * @align: buffer alignment (in bytes) + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * @iova: IO virtual address * @vpua: VPU side memory addr which is used by RC_CODE * @size: buffer size (in bytes) */ struct venc_h264_vpu_buf { - u32 align; u32 iova; u32 vpua; u32 size; @@ -108,6 +110,8 @@ struct venc_h264_vpu_buf { /* * struct venc_h264_vsi - Structure for VPU driver control and info share + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * This structure is allocated in VPU side and shared to AP side. * @config: h264 encoder configuration * @work_bufs: working buffer information in VPU side @@ -150,12 +154,6 @@ struct venc_h264_inst { struct mtk_vcodec_ctx *ctx; }; -static inline void h264_write_reg(struct venc_h264_inst *inst, u32 addr, - u32 val) -{ - writel(val, inst->hw_base + addr); -} - static inline u32 h264_read_reg(struct venc_h264_inst *inst, u32 addr) { return readl(inst->hw_base + addr); @@ -214,6 +212,8 @@ static unsigned int h264_get_level(struct venc_h264_inst *inst, return 40; case V4L2_MPEG_VIDEO_H264_LEVEL_4_1: return 41; + case V4L2_MPEG_VIDEO_H264_LEVEL_4_2: + return 42; default: mtk_vcodec_debug(inst, "unsupported level %d", level); return 31; -- cgit v1.3-18-gd494 From 19d6837a52f1683cf448265952d559a44a7df924 Mon Sep 17 00:00:00 2001 From: Tiffany Lin Date: Mon, 15 Aug 2016 00:37:19 -0300 Subject: [media] vcodec:mediatek: Refine VP8 encoder driver This patch remove field and function that unused anymore Signed-off-by: Tiffany Lin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c index 60bbcd2a0510..6d9758479f9a 100644 --- a/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c +++ b/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c @@ -56,6 +56,8 @@ enum venc_vp8_vpu_work_buf { /* * struct venc_vp8_vpu_config - Structure for vp8 encoder configuration + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * @input_fourcc: input fourcc * @bitrate: target bitrate (in bps) * @pic_w: picture width. Picture size is visible stream resolution, in pixels, @@ -83,14 +85,14 @@ struct venc_vp8_vpu_config { }; /* - * struct venc_vp8_vpu_buf -Structure for buffer information - * @align: buffer alignment (in bytes) + * struct venc_vp8_vpu_buf - Structure for buffer information + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * @iova: IO virtual address * @vpua: VPU side memory addr which is used by RC_CODE * @size: buffer size (in bytes) */ struct venc_vp8_vpu_buf { - u32 align; u32 iova; u32 vpua; u32 size; @@ -98,6 +100,8 @@ struct venc_vp8_vpu_buf { /* * struct venc_vp8_vsi - Structure for VPU driver control and info share + * AP-W/R : AP is writer/reader on this item + * VPU-W/R: VPU is write/reader on this item * This structure is allocated in VPU side and shared to AP side. * @config: vp8 encoder configuration * @work_bufs: working buffer information in VPU side @@ -138,12 +142,6 @@ struct venc_vp8_inst { struct mtk_vcodec_ctx *ctx; }; -static inline void vp8_enc_write_reg(struct venc_vp8_inst *inst, u32 addr, - u32 val) -{ - writel(val, inst->hw_base + addr); -} - static inline u32 vp8_enc_read_reg(struct venc_vp8_inst *inst, u32 addr) { return readl(inst->hw_base + addr); -- cgit v1.3-18-gd494 From 5dfd5e5e3bc68ab3912acc712c8180942094fc69 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Mon, 22 Aug 2016 18:16:37 -0500 Subject: i40iw: Add missing NULL check for MPA private data Add NULL check for pdata and pdata->addr before the memcpy in i40iw_form_cm_frame(). This fixes a NULL pointer de-reference which occurs when the MPA private data pointer is NULL. Also only copy pdata->size bytes in the memcpy to prevent reading past the length of the private data buffer provided by upper layer. Fixes: f27b4746f378 ("i40iw: add connection management code") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c index 5026dc79978a..64343985e0b7 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_cm.c +++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c @@ -535,8 +535,8 @@ static struct i40iw_puda_buf *i40iw_form_cm_frame(struct i40iw_cm_node *cm_node, buf += hdr_len; } - if (pd_len) - memcpy(buf, pdata->addr, pd_len); + if (pdata && pdata->addr) + memcpy(buf, pdata->addr, pdata->size); atomic_set(&sqbuf->refcount, 1); -- cgit v1.3-18-gd494 From 7eaf8313b1cfe93417a22bdc3f7380cac2a3dc6d Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Mon, 22 Aug 2016 19:01:47 -0500 Subject: i40iw: Do not set self-referencing pointer to NULL after kfree In i40iw_free_virt_mem(), do not set mem->va to NULL after freeing it as mem->va is a self-referencing pointer to mem. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_utils.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_utils.c b/drivers/infiniband/hw/i40iw/i40iw_utils.c index 0e8db0a35141..6fd043b1d714 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_utils.c +++ b/drivers/infiniband/hw/i40iw/i40iw_utils.c @@ -673,8 +673,11 @@ enum i40iw_status_code i40iw_free_virt_mem(struct i40iw_hw *hw, { if (!mem) return I40IW_ERR_PARAM; + /* + * mem->va points to the parent of mem, so both mem and mem->va + * can not be touched once mem->va is freed + */ kfree(mem->va); - mem->va = NULL; return 0; } -- cgit v1.3-18-gd494 From 82d200cc6fc817dbf049b67e5e3215eab427e846 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 23 Aug 2016 21:16:26 +0100 Subject: IB/mlx5: Remove superfluous include of io-mapping.h This file does not use any structs or functions defined by io-mapping.h (nor does it directly use iomap, ioremap, iounamp or friends). Remove it to simplify verification of changes to io-mapping.h The include existed since its inception in commit e126ba97dba9edeb6fafa3665b5f8497fc9cdf8c Author: Eli Cohen Date: Sun Jul 7 17:25:49 2013 +0300 mlx5: Add driver for Mellanox Connect-IB adapters which looks like a copy across from the Mellanox ethernet driver. Signed-off-by: Chris Wilson Cc: Eli Cohen Cc: Jack Morgenstein Cc: Or Gerlitz Cc: Matan Barak Cc: Leon Romanovsky Cc: Doug Ledford Cc: Sean Hefty Cc: Hal Rosenstock Cc: linux-rdma@vger.kernel.org Reviewed-by: Leon Romanovsky Reviewed-by: Laurence Oberman Tested-by: Laurence Oberman Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index a84bb766fc62..1b4094baa2de 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -37,7 +37,6 @@ #include #include #include -#include #if defined(CONFIG_X86) #include #endif -- cgit v1.3-18-gd494 From d41d0910d97f05be987d2d60de7e8685c108963b Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Tue, 23 Aug 2016 16:50:13 -0500 Subject: i40iw: Fix double free of allocated_buffer Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in the create_qp error path. Correct this by having it freed only once in i40iw_free_qp_resources(). Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 2360338877bf..722e5af1e3d8 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -794,7 +794,6 @@ static struct ib_qp *i40iw_create_qp(struct ib_pd *ibpd, return &iwqp->ibqp; error: i40iw_free_qp_resources(iwdev, iwqp, qp_num); - kfree(mem); return ERR_PTR(err_code); } -- cgit v1.3-18-gd494 From 433c58139f6a7d59824aadd23d6c9cac1d4e6100 Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Tue, 23 Aug 2016 17:24:56 -0500 Subject: i40iw: Avoid writing to freed memory iwpbl->iwmr points to the structure that contains iwpbl, which is iwmr. Setting this to NULL would result in writing to freed memory. So just free iwmr, and return. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_verbs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_verbs.c b/drivers/infiniband/hw/i40iw/i40iw_verbs.c index 722e5af1e3d8..6329c971c22f 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_verbs.c +++ b/drivers/infiniband/hw/i40iw/i40iw_verbs.c @@ -1925,8 +1925,7 @@ static int i40iw_dereg_mr(struct ib_mr *ib_mr) } if (iwpbl->pbl_allocated) i40iw_free_pble(iwdev->pble_rsrc, palloc); - kfree(iwpbl->iwmr); - iwpbl->iwmr = NULL; + kfree(iwmr); return 0; } -- cgit v1.3-18-gd494 From 3c199b4523c92dc5df027eeeffa657e2ccf453ab Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Wed, 24 Aug 2016 01:17:41 -0400 Subject: RDMA/ocrdma: Fix the max_sge reported from FW Current driver is reporting wrong values for max_sge and max_sge_rd in query_device. This breaks the nfs rdma and iser in some device profiles. Fixing the driver to report correct values from FW. Signed-off-by: Selvin Xavier Signed-off-by: Devesh Sharma Signed-off-by: Doug Ledford --- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 14 +++++++------- drivers/infiniband/hw/ocrdma/ocrdma_sli.h | 12 ++++++++---- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 4 ++-- 3 files changed, 17 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 16740dcb876b..67fc0b6857e1 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -1156,18 +1156,18 @@ static void ocrdma_get_attr(struct ocrdma_dev *dev, attr->max_srq = (rsp->max_srq_rpir_qps & OCRDMA_MBX_QUERY_CFG_MAX_SRQ_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_SRQ_OFFSET; - attr->max_send_sge = ((rsp->max_write_send_sge & + attr->max_send_sge = ((rsp->max_recv_send_sge & OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT); - attr->max_recv_sge = (rsp->max_write_send_sge & - OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >> - OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT; + attr->max_recv_sge = (rsp->max_recv_send_sge & + OCRDMA_MBX_QUERY_CFG_MAX_RECV_SGE_MASK) >> + OCRDMA_MBX_QUERY_CFG_MAX_RECV_SGE_SHIFT; attr->max_srq_sge = (rsp->max_srq_rqe_sge & OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET; - attr->max_rdma_sge = (rsp->max_write_send_sge & - OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK) >> - OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT; + attr->max_rdma_sge = (rsp->max_wr_rd_sge & + OCRDMA_MBX_QUERY_CFG_MAX_RD_SGE_MASK) >> + OCRDMA_MBX_QUERY_CFG_MAX_RD_SGE_SHIFT; attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp & OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >> OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h index 0efc9662c6d8..37df4481bb8f 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_sli.h +++ b/drivers/infiniband/hw/ocrdma/ocrdma_sli.h @@ -554,9 +554,9 @@ enum { OCRDMA_MBX_QUERY_CFG_L3_TYPE_MASK = 0x18, OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0, OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF, - OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16, - OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF << - OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT, + OCRDMA_MBX_QUERY_CFG_MAX_RECV_SGE_SHIFT = 16, + OCRDMA_MBX_QUERY_CFG_MAX_RECV_SGE_MASK = 0xFFFF << + OCRDMA_MBX_QUERY_CFG_MAX_RECV_SGE_SHIFT, OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0, OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF, @@ -612,6 +612,8 @@ enum { OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET = 0, OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK = 0xFFFF << OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET, + OCRDMA_MBX_QUERY_CFG_MAX_RD_SGE_SHIFT = 0, + OCRDMA_MBX_QUERY_CFG_MAX_RD_SGE_MASK = 0xFFFF, }; struct ocrdma_mbx_query_config { @@ -619,7 +621,7 @@ struct ocrdma_mbx_query_config { struct ocrdma_mbx_rsp rsp; u32 qp_srq_cq_ird_ord; u32 max_pd_ca_ack_delay; - u32 max_write_send_sge; + u32 max_recv_send_sge; u32 max_ird_ord_per_qp; u32 max_shared_ird_ord; u32 max_mr; @@ -639,6 +641,8 @@ struct ocrdma_mbx_query_config { u32 max_wqes_rqes_per_q; u32 max_cq_cqes_per_cq; u32 max_srq_rqe_sge; + u32 max_wr_rd_sge; + u32 ird_pgsz_num_pages; }; struct ocrdma_fw_ver_rsp { diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index b1a3d91fe8b9..0aa854737e74 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -125,8 +125,8 @@ int ocrdma_query_device(struct ib_device *ibdev, struct ib_device_attr *attr, IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_MGT_EXTENSIONS; - attr->max_sge = dev->attr.max_send_sge; - attr->max_sge_rd = attr->max_sge; + attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_recv_sge); + attr->max_sge_rd = dev->attr.max_rdma_sge; attr->max_cq = dev->attr.max_cq; attr->max_cqe = dev->attr.max_cqe; attr->max_mr = dev->attr.max_mr; -- cgit v1.3-18-gd494 From f888f58795b640442165e60a6fa93e8e623d01a5 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 24 Aug 2016 11:18:51 +0200 Subject: mlxsw: spectrum: Add missing flood to router port In case we have a layer 3 interface on top of a bridge (VLAN / FID RIF), then we should flood the following packet types to the router: * Broadcast: If DIP is the broadcast address of the interface, then we need to be able to get it to CPU by trapping it following route lookup. * Reserved IP multicast (224.0.0.X): Some control packets (e.g. OSPF) use this range and are trapped in the router block. Fixes: 99f44bb3527b ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/port.h | 1 + drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 43 +++++++++++++++++++++++++- 2 files changed, 43 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/port.h b/drivers/net/ethernet/mellanox/mlxsw/port.h index f33b997f2b61..af371a82c35b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/port.h +++ b/drivers/net/ethernet/mellanox/mlxsw/port.h @@ -56,6 +56,7 @@ #define MLXSW_PORT_PHY_BITS_MASK (MLXSW_PORT_MAX_PHY_PORTS - 1) #define MLXSW_PORT_CPU_PORT 0x0 +#define MLXSW_PORT_ROUTER_PORT (MLXSW_PORT_MAX_PHY_PORTS + 2) #define MLXSW_PORT_DONT_CARE (MLXSW_PORT_MAX_PORTS) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 1f8168906811..7291f2c4b0c7 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3324,6 +3324,39 @@ static struct mlxsw_sp_fid *mlxsw_sp_bridge_fid_get(struct mlxsw_sp *mlxsw_sp, return mlxsw_sp_fid_find(mlxsw_sp, fid); } +static enum mlxsw_flood_table_type mlxsw_sp_flood_table_type_get(u16 fid) +{ + return mlxsw_sp_fid_is_vfid(fid) ? MLXSW_REG_SFGC_TABLE_TYPE_FID : + MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST; +} + +static u16 mlxsw_sp_flood_table_index_get(u16 fid) +{ + return mlxsw_sp_fid_is_vfid(fid) ? mlxsw_sp_fid_to_vfid(fid) : fid; +} + +static int mlxsw_sp_router_port_flood_set(struct mlxsw_sp *mlxsw_sp, u16 fid, + bool set) +{ + enum mlxsw_flood_table_type table_type; + char *sftr_pl; + u16 index; + int err; + + sftr_pl = kmalloc(MLXSW_REG_SFTR_LEN, GFP_KERNEL); + if (!sftr_pl) + return -ENOMEM; + + table_type = mlxsw_sp_flood_table_type_get(fid); + index = mlxsw_sp_flood_table_index_get(fid); + mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_BM, index, table_type, + 1, MLXSW_PORT_ROUTER_PORT, set); + err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); + + kfree(sftr_pl); + return err; +} + static enum mlxsw_reg_ritr_if_type mlxsw_sp_rif_type_get(u16 fid) { if (mlxsw_sp_fid_is_vfid(fid)) @@ -3360,10 +3393,14 @@ static int mlxsw_sp_rif_bridge_create(struct mlxsw_sp *mlxsw_sp, if (rif == MLXSW_SP_RIF_MAX) return -ERANGE; - err = mlxsw_sp_rif_bridge_op(mlxsw_sp, l3_dev, f->fid, rif, true); + err = mlxsw_sp_router_port_flood_set(mlxsw_sp, f->fid, true); if (err) return err; + err = mlxsw_sp_rif_bridge_op(mlxsw_sp, l3_dev, f->fid, rif, true); + if (err) + goto err_rif_bridge_op; + err = mlxsw_sp_rif_fdb_op(mlxsw_sp, l3_dev->dev_addr, f->fid, true); if (err) goto err_rif_fdb_op; @@ -3385,6 +3422,8 @@ err_rif_alloc: mlxsw_sp_rif_fdb_op(mlxsw_sp, l3_dev->dev_addr, f->fid, false); err_rif_fdb_op: mlxsw_sp_rif_bridge_op(mlxsw_sp, l3_dev, f->fid, rif, false); +err_rif_bridge_op: + mlxsw_sp_router_port_flood_set(mlxsw_sp, f->fid, false); return err; } @@ -3404,6 +3443,8 @@ void mlxsw_sp_rif_bridge_destroy(struct mlxsw_sp *mlxsw_sp, mlxsw_sp_rif_bridge_op(mlxsw_sp, l3_dev, f->fid, rif, false); + mlxsw_sp_router_port_flood_set(mlxsw_sp, f->fid, false); + netdev_dbg(l3_dev, "RIF=%d destroyed\n", rif); } -- cgit v1.3-18-gd494 From 51af96b53469f3b8cfcfe0504d0ff87239175b78 Mon Sep 17 00:00:00 2001 From: Yotam Gigi Date: Wed, 24 Aug 2016 11:18:52 +0200 Subject: mlxsw: router: Enable neighbors to be created on stacked devices Make the function mlxsw_router_neigh_construct search the rif according to the neighbour dev other than the dev that was passed to the ndo, thus allowing creating neigbhours upon stacked devices. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Yotam Gigi Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 90bb93b037ec..917ddd1e422f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -657,7 +657,7 @@ int mlxsw_sp_router_neigh_construct(struct net_device *dev, return 0; } - r = mlxsw_sp_rif_find_by_dev(mlxsw_sp, dev); + r = mlxsw_sp_rif_find_by_dev(mlxsw_sp, n->dev); if (WARN_ON(!r)) return -EINVAL; -- cgit v1.3-18-gd494 From 9a035a40f7f3f6708b79224b86c5777a3334f7ea Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 15 Aug 2016 09:02:38 -0600 Subject: xenbus: don't look up transaction IDs for ordinary writes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This should really only be done for XS_TRANSACTION_END messages, or else at least some of the xenstore-* tools don't work anymore. Fixes: 0beef634b8 ("xenbus: don't BUG() on user mode induced condition") Reported-by: Richard Schütz Cc: Signed-off-by: Jan Beulich Tested-by: Richard Schütz Signed-off-by: David Vrabel --- drivers/xen/xenbus/xenbus_dev_frontend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c index 7487971f9f78..c1010f018bd8 100644 --- a/drivers/xen/xenbus/xenbus_dev_frontend.c +++ b/drivers/xen/xenbus/xenbus_dev_frontend.c @@ -316,7 +316,7 @@ static int xenbus_write_transaction(unsigned msg_type, rc = -ENOMEM; goto out; } - } else { + } else if (msg_type == XS_TRANSACTION_END) { list_for_each_entry(trans, &u->transactions, list) if (trans->handle.id == u->u.msg.tx_id) break; -- cgit v1.3-18-gd494 From 486b0f7bcd64be027535811ef44195bc1027fbd3 Mon Sep 17 00:00:00 2001 From: Song Liu Date: Fri, 19 Aug 2016 15:34:01 -0700 Subject: r5cache: set MD_JOURNAL_CLEAN correctly Currently, the code sets MD_JOURNAL_CLEAN when the array has MD_FEATURE_JOURNAL and the recovery_cp is MaxSector. The array will be MD_JOURNAL_CLEAN even if the journal device is missing. With this patch, the MD_JOURNAL_CLEAN is only set when the journal device presents. Signed-off-by: Song Liu Signed-off-by: Shaohua Li --- drivers/md/md.c | 5 +---- drivers/md/raid5.c | 13 ++++++++----- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index cc25cbcf10b2..4f6cf3b849e3 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1604,11 +1604,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev) mddev->new_chunk_sectors = mddev->chunk_sectors; } - if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL) { + if (le32_to_cpu(sb->feature_map) & MD_FEATURE_JOURNAL) set_bit(MD_HAS_JOURNAL, &mddev->flags); - if (mddev->recovery_cp == MaxSector) - set_bit(MD_JOURNAL_CLEAN, &mddev->flags); - } } else if (mddev->pers == NULL) { /* Insist of good event counter while assembling, except for * spares (which don't need an event count) */ diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4f8f5242ea3b..2119e094dfb3 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -6840,11 +6840,14 @@ static int raid5_run(struct mddev *mddev) if (IS_ERR(conf)) return PTR_ERR(conf); - if (test_bit(MD_HAS_JOURNAL, &mddev->flags) && !journal_dev) { - printk(KERN_ERR "md/raid:%s: journal disk is missing, force array readonly\n", - mdname(mddev)); - mddev->ro = 1; - set_disk_ro(mddev->gendisk, 1); + if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) { + if (!journal_dev) { + pr_err("md/raid:%s: journal disk is missing, force array readonly\n", + mdname(mddev)); + mddev->ro = 1; + set_disk_ro(mddev->gendisk, 1); + } else if (mddev->recovery_cp == MaxSector) + set_bit(MD_JOURNAL_CLEAN, &mddev->flags); } conf->min_offset_diff = min_offset_diff; -- cgit v1.3-18-gd494 From 0f6187dbe542d71ace8ba0908954b0f4f8a30a1e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 21 Aug 2016 14:42:25 +0000 Subject: md-cluster: fix error return code in join() Fix to return error code -ENOMEM from the lockres_init() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Shaohua Li --- drivers/md/md-cluster.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md-cluster.c b/drivers/md/md-cluster.c index 41573f1f626f..34a840d9df76 100644 --- a/drivers/md/md-cluster.c +++ b/drivers/md/md-cluster.c @@ -834,8 +834,10 @@ static int join(struct mddev *mddev, int nodes) goto err; } cinfo->ack_lockres = lockres_init(mddev, "ack", ack_bast, 0); - if (!cinfo->ack_lockres) + if (!cinfo->ack_lockres) { + ret = -ENOMEM; goto err; + } /* get sync CR lock on ACK. */ if (dlm_lock_sync(cinfo->ack_lockres, DLM_LOCK_CR)) pr_err("md-cluster: failed to get a sync CR lock on ACK!(%d)\n", @@ -849,8 +851,10 @@ static int join(struct mddev *mddev, int nodes) pr_info("md-cluster: Joined cluster %s slot %d\n", str, cinfo->slot_number); snprintf(str, 64, "bitmap%04d", cinfo->slot_number - 1); cinfo->bitmap_lockres = lockres_init(mddev, str, NULL, 1); - if (!cinfo->bitmap_lockres) + if (!cinfo->bitmap_lockres) { + ret = -ENOMEM; goto err; + } if (dlm_lock_sync(cinfo->bitmap_lockres, DLM_LOCK_PW)) { pr_err("Failed to get bitmap lock\n"); ret = -EINVAL; @@ -858,8 +862,10 @@ static int join(struct mddev *mddev, int nodes) } cinfo->resync_lockres = lockres_init(mddev, "resync", NULL, 0); - if (!cinfo->resync_lockres) + if (!cinfo->resync_lockres) { + ret = -ENOMEM; goto err; + } return 0; err: -- cgit v1.3-18-gd494 From 27028626b4b9022dcac23688e09ea43b36e1183c Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Tue, 23 Aug 2016 10:53:57 +0200 Subject: raid10: record correct address of bad block For failed write request record block address on a device, not block address in an array. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1a632a8c8005..4589866257d5 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2465,20 +2465,21 @@ static int narrow_write_error(struct r10bio *r10_bio, int i) while (sect_to_write) { struct bio *wbio; + sector_t wsector; if (sectors > sect_to_write) sectors = sect_to_write; /* Write at 'sector' for 'sectors' */ wbio = bio_clone_mddev(bio, GFP_NOIO, mddev); bio_trim(wbio, sector - bio->bi_iter.bi_sector, sectors); - wbio->bi_iter.bi_sector = (r10_bio->devs[i].addr+ - choose_data_offset(r10_bio, rdev) + - (sector - r10_bio->sector)); + wsector = r10_bio->devs[i].addr + (sector - r10_bio->sector); + wbio->bi_iter.bi_sector = wsector + + choose_data_offset(r10_bio, rdev); wbio->bi_bdev = rdev->bdev; bio_set_op_attrs(wbio, REQ_OP_WRITE, 0); if (submit_bio_wait(wbio) < 0) /* Failure! */ - ok = rdev_set_badblocks(rdev, sector, + ok = rdev_set_badblocks(rdev, wsector, sectors, 0) && ok; -- cgit v1.3-18-gd494 From 5f9d1fde7d54a5d5fd8cccbee9c9c31474fcdcf2 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 22 Aug 2016 21:14:01 -0700 Subject: raid5: fix memory leak of bio integrity data Yi reported a memory leak of raid5 with DIF/DIX enabled disks. raid5 doesn't alloc/free bio, instead it reuses bios. There are two issues in current code: 1. the code calls bio_init (from init_stripe->raid5_build_block->bio_init) then bio_reset (ops_run_io). The bio is reused, so likely there is integrity data attached. bio_init will clear a pointer to integrity data and makes bio_reset can't release the data 2. bio_reset is called before dispatching bio. After bio is finished, it's possible we don't free bio's integrity data (eg, we don't call bio_reset again) Both issues will cause memory leak. The patch moves bio_init to stripe creation and bio_reset to bio end io. This will fix the two issues. Reported-by: Yi Zhang Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 2119e094dfb3..d1a279b1916b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1005,7 +1005,6 @@ again: set_bit(STRIPE_IO_STARTED, &sh->state); - bio_reset(bi); bi->bi_bdev = rdev->bdev; bio_set_op_attrs(bi, op, op_flags); bi->bi_end_io = op_is_write(op) @@ -1057,7 +1056,6 @@ again: set_bit(STRIPE_IO_STARTED, &sh->state); - bio_reset(rbi); rbi->bi_bdev = rrdev->bdev; bio_set_op_attrs(rbi, op, op_flags); BUG_ON(!op_is_write(op)); @@ -1990,9 +1988,11 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) put_cpu(); } -static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp) +static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp, + int disks) { struct stripe_head *sh; + int i; sh = kmem_cache_zalloc(sc, gfp); if (sh) { @@ -2001,6 +2001,12 @@ static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp) INIT_LIST_HEAD(&sh->batch_list); INIT_LIST_HEAD(&sh->lru); atomic_set(&sh->count, 1); + for (i = 0; i < disks; i++) { + struct r5dev *dev = &sh->dev[i]; + + bio_init(&dev->req); + bio_init(&dev->rreq); + } } return sh; } @@ -2008,7 +2014,7 @@ static int grow_one_stripe(struct r5conf *conf, gfp_t gfp) { struct stripe_head *sh; - sh = alloc_stripe(conf->slab_cache, gfp); + sh = alloc_stripe(conf->slab_cache, gfp, conf->pool_size); if (!sh) return 0; @@ -2179,7 +2185,7 @@ static int resize_stripes(struct r5conf *conf, int newsize) mutex_lock(&conf->cache_size_mutex); for (i = conf->max_nr_stripes; i; i--) { - nsh = alloc_stripe(sc, GFP_KERNEL); + nsh = alloc_stripe(sc, GFP_KERNEL, newsize); if (!nsh) break; @@ -2311,6 +2317,7 @@ static void raid5_end_read_request(struct bio * bi) (unsigned long long)sh->sector, i, atomic_read(&sh->count), bi->bi_error); if (i == disks) { + bio_reset(bi); BUG(); return; } @@ -2414,6 +2421,7 @@ static void raid5_end_read_request(struct bio * bi) clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); raid5_release_stripe(sh); + bio_reset(bi); } static void raid5_end_write_request(struct bio *bi) @@ -2448,6 +2456,7 @@ static void raid5_end_write_request(struct bio *bi) (unsigned long long)sh->sector, i, atomic_read(&sh->count), bi->bi_error); if (i == disks) { + bio_reset(bi); BUG(); return; } @@ -2491,18 +2500,17 @@ static void raid5_end_write_request(struct bio *bi) if (sh->batch_head && sh != sh->batch_head) raid5_release_stripe(sh->batch_head); + bio_reset(bi); } static void raid5_build_block(struct stripe_head *sh, int i, int previous) { struct r5dev *dev = &sh->dev[i]; - bio_init(&dev->req); dev->req.bi_io_vec = &dev->vec; dev->req.bi_max_vecs = 1; dev->req.bi_private = sh; - bio_init(&dev->rreq); dev->rreq.bi_io_vec = &dev->rvec; dev->rreq.bi_max_vecs = 1; dev->rreq.bi_private = sh; -- cgit v1.3-18-gd494 From 45c91d808ff989d950e260dab9f89e8f4a3c9c2c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 22 Aug 2016 21:14:02 -0700 Subject: raid5: avoid unnecessary bio data set bio_reset doesn't change bi_io_vec and bi_max_vecs, so we don't need to set them every time. bi_private will be set before the bio is dispatched. Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d1a279b1916b..62febe8d4919 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2005,7 +2005,12 @@ static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp, struct r5dev *dev = &sh->dev[i]; bio_init(&dev->req); + dev->req.bi_io_vec = &dev->vec; + dev->req.bi_max_vecs = 1; + bio_init(&dev->rreq); + dev->rreq.bi_io_vec = &dev->rvec; + dev->rreq.bi_max_vecs = 1; } } return sh; @@ -2507,14 +2512,6 @@ static void raid5_build_block(struct stripe_head *sh, int i, int previous) { struct r5dev *dev = &sh->dev[i]; - dev->req.bi_io_vec = &dev->vec; - dev->req.bi_max_vecs = 1; - dev->req.bi_private = sh; - - dev->rreq.bi_io_vec = &dev->rvec; - dev->rreq.bi_max_vecs = 1; - dev->rreq.bi_private = sh; - dev->flags = 0; dev->sector = raid5_compute_blocknr(sh, i, previous); } -- cgit v1.3-18-gd494 From af7c388a9c2e5fdd36da6eaaa35fb86fb8aefd0b Mon Sep 17 00:00:00 2001 From: Vince Hsu Date: Wed, 24 Aug 2016 15:56:56 +0200 Subject: clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2 Tegra114 has a HW bug that the PLLD/PLLD2 lock bit cannot be asserted when the DIS power domain is during up-powergating process but the clamp to this domain is not removed yet. That causes a timeout and aborts the power sequence, although the PLLD/PLLD2 has already locked. To remove the false alarm, we don't use the lock for PLLD/PLLD2. Just wait 1ms and treat the clocks as locked. Signed-off-by: Vince Hsu Tested-by: Jonathan Hunter Signed-off-by: Thierry Reding Signed-off-by: Stephen Boyd --- drivers/clk/tegra/clk-tegra114.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index 64da7b79a6e4..933b5dd698b8 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -428,7 +428,7 @@ static struct tegra_clk_pll_params pll_d_params = { .div_nmp = &pllp_nmp, .freq_table = pll_d_freq_table, .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | - TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, + TEGRA_PLL_HAS_LOCK_ENABLE, }; static struct tegra_clk_pll_params pll_d2_params = { @@ -446,7 +446,7 @@ static struct tegra_clk_pll_params pll_d2_params = { .div_nmp = &pllp_nmp, .freq_table = pll_d_freq_table, .flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_LFCON | - TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, + TEGRA_PLL_HAS_LOCK_ENABLE, }; static const struct pdiv_map pllu_p[] = { -- cgit v1.3-18-gd494 From e1718d97aa88ea44a6a8f50ff464253dd0dacf01 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 24 Aug 2016 12:31:36 -0400 Subject: drm/amdgpu: avoid a possible array overflow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When looking up the connector type make sure the index is valid. Avoids a later crash if we read past the end of the array. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c index 983175363b06..151422307d31 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c @@ -321,6 +321,12 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device * (le16_to_cpu(path->usConnObjectId) & OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT; + if (con_obj_id >= ARRAY_SIZE(object_connector_convert)) { + DRM_ERROR("invalid con_obj_id %d for device tag 0x%04x\n", + con_obj_id, le16_to_cpu(path->usDeviceTag)); + continue; + } + connector_type = object_connector_convert[con_obj_id]; connector_object_id = con_obj_id; -- cgit v1.3-18-gd494 From 611a1507fe8569ce1adab3abc982ea58ab559fb9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 24 Aug 2016 13:04:15 -0400 Subject: drm/amdgpu: skip TV/CV in display parsing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No asics supported by amdgpu support analog TV. Workaround for bug: https://bugs.freedesktop.org/show_bug.cgi?id=97460 Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c index 151422307d31..fe872b82e619 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c @@ -321,6 +321,13 @@ bool amdgpu_atombios_get_connector_info_from_object_table(struct amdgpu_device * (le16_to_cpu(path->usConnObjectId) & OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT; + /* Skip TV/CV support */ + if ((le16_to_cpu(path->usDeviceTag) == + ATOM_DEVICE_TV1_SUPPORT) || + (le16_to_cpu(path->usDeviceTag) == + ATOM_DEVICE_CV_SUPPORT)) + continue; + if (con_obj_id >= ARRAY_SIZE(object_connector_convert)) { DRM_ERROR("invalid con_obj_id %d for device tag 0x%04x\n", con_obj_id, le16_to_cpu(path->usDeviceTag)); -- cgit v1.3-18-gd494 From 716b076ba4b273f5f85c97448c5110c6d21e73e6 Mon Sep 17 00:00:00 2001 From: Doug Ledford Date: Wed, 24 Aug 2016 12:14:19 -0400 Subject: IB/srpt: Update sport->port_guid with each port refresh If port_guid is set with the default subnet_prefix, then we get a change event and run a port refresh, we don't update the port_guid. As a result, attempts to create a target device that uses the new subnet_prefix in the wwn will fail to find a match and be rejected by the ib_srpt driver. This makes it impossible to configure a port if it was initialized with a default subnet_prefix and later changed to any non-default subnet-prefix. Updating the port refresh task to always update the wwn based upon the current subnext_prefix solves this problem. Cc: Bart Van Assche Cc: nab@linux-iscsi.org Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/srpt/ib_srpt.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index dfa23b075a88..883bbfe08e0e 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -522,6 +522,11 @@ static int srpt_refresh_port(struct srpt_port *sport) if (ret) goto err_query_port; + snprintf(sport->port_guid, sizeof(sport->port_guid), + "0x%016llx%016llx", + be64_to_cpu(sport->gid.global.subnet_prefix), + be64_to_cpu(sport->gid.global.interface_id)); + if (!sport->mad_agent) { memset(®_req, 0, sizeof(reg_req)); reg_req.mgmt_class = IB_MGMT_CLASS_DEVICE_MGMT; @@ -2548,10 +2553,6 @@ static void srpt_add_one(struct ib_device *device) sdev->device->name, i); goto err_ring; } - snprintf(sport->port_guid, sizeof(sport->port_guid), - "0x%016llx%016llx", - be64_to_cpu(sport->gid.global.subnet_prefix), - be64_to_cpu(sport->gid.global.interface_id)); } spin_lock(&srpt_dev_lock); -- cgit v1.3-18-gd494 From a45f9d41c9dd2c28e38b9b88f69c39bc63807de9 Mon Sep 17 00:00:00 2001 From: Xing Zheng Date: Wed, 24 Aug 2016 11:29:39 -0700 Subject: clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399 We don't have code to handle any of the noc clocks in rk3399 and they're all just listed as critical clocks. Let's do the same for aclk_emmc_noc. Without this clock being marked as critical we have problems around suspend/resume after commit 20c389e656a8 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399"). Before that change we were presumably not actually gating any of these clocks because we were setting the wrong gate. Fixes: 20c389e656a8 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399") Signed-off-by: Xing Zheng Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-rk3399.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index ec5b2fd77c50..cdfabeb9a034 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1484,6 +1484,7 @@ static const char *const rk3399_cru_critical_clocks[] __initconst = { "hclk_perilp1", "hclk_perilp1_noc", "aclk_dmac0_perilp", + "aclk_emmc_noc", "gpll_hclk_perilp1_src", "gpll_aclk_perilp0_src", "gpll_aclk_perihp_src", -- cgit v1.3-18-gd494 From 299f6230bc6d0ccd5f95bb0fb865d80a9c7d5ccc Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 24 Aug 2016 21:12:58 -0400 Subject: dm flakey: fix reads to be issued if drop_writes configured v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the down_interval") overlooked the 'drop_writes' feature, which is meant to allow reads to be issued rather than errored, during the down_interval. Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval") Reported-by: Qu Wenruo Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-flakey.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 97e446d54a15..6a2e8dd44a1b 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -289,15 +289,13 @@ static int flakey_map(struct dm_target *ti, struct bio *bio) pb->bio_submitted = true; /* - * Map reads as normal only if corrupt_bio_byte set. + * Error reads if neither corrupt_bio_byte or drop_writes are set. + * Otherwise, flakey_end_io() will decide if the reads should be modified. */ if (bio_data_dir(bio) == READ) { - /* If flags were specified, only corrupt those that match. */ - if (fc->corrupt_bio_byte && (fc->corrupt_bio_rw == READ) && - all_corrupt_bio_flags_match(bio, fc)) - goto map_bio; - else + if (!fc->corrupt_bio_byte && !test_bit(DROP_WRITES, &fc->flags)) return -EIO; + goto map_bio; } /* @@ -334,14 +332,21 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio, int error) struct flakey_c *fc = ti->private; struct per_bio_data *pb = dm_per_bio_data(bio, sizeof(struct per_bio_data)); - /* - * Corrupt successful READs while in down state. - */ if (!error && pb->bio_submitted && (bio_data_dir(bio) == READ)) { - if (fc->corrupt_bio_byte) + if (fc->corrupt_bio_byte && (fc->corrupt_bio_rw == READ) && + all_corrupt_bio_flags_match(bio, fc)) { + /* + * Corrupt successful matching READs while in down state. + */ corrupt_bio_data(bio, fc); - else + + } else if (!test_bit(DROP_WRITES, &fc->flags)) { + /* + * Error read during the down_interval if drop_writes + * wasn't configured. + */ return -EIO; + } } return error; -- cgit v1.3-18-gd494 From 9c5a559d9495bba6e5b6c5ee4e8e2f2b71088684 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Tue, 23 Aug 2016 21:17:48 +0200 Subject: dm log: fix unitialized bio operation flags Commit e6047149db ("dm: use bio op accessors") switched DM over to using bio_set_op_attrs() but didn't take care to initialize lc->io_req.bi_op_flags in dm-log.c:rw_header(). This caused rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in sd_init_command(). Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}. Fixes: e6047149db ("dm: use bio op accessors") Signed-off-by: Heinz Mauelshagen Reviewed-by: Shaun Tancheff Signed-off-by: Mike Snitzer --- drivers/md/dm-log.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 4ca2d1df5b44..07fc1ad42ec5 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -291,9 +291,10 @@ static void header_from_disk(struct log_header_core *core, struct log_header_dis core->nr_regions = le64_to_cpu(disk->nr_regions); } -static int rw_header(struct log_c *lc, int rw) +static int rw_header(struct log_c *lc, int op) { - lc->io_req.bi_op = rw; + lc->io_req.bi_op = op; + lc->io_req.bi_op_flags = 0; return dm_io(&lc->io_req, 1, &lc->header_location, NULL); } @@ -316,7 +317,7 @@ static int read_header(struct log_c *log) { int r; - r = rw_header(log, READ); + r = rw_header(log, REQ_OP_READ); if (r) return r; @@ -630,7 +631,7 @@ static int disk_resume(struct dm_dirty_log *log) header_to_disk(&lc->header, lc->disk_header); /* write the new header */ - r = rw_header(lc, WRITE); + r = rw_header(lc, REQ_OP_WRITE); if (!r) { r = flush_header(lc); if (r) @@ -698,7 +699,7 @@ static int disk_flush(struct dm_dirty_log *log) log_clear_bit(lc, lc->clean_bits, i); } - r = rw_header(lc, WRITE); + r = rw_header(lc, REQ_OP_WRITE); if (r) fail_log_device(lc); else { -- cgit v1.3-18-gd494 From 23fd537c9508fb6e3b93ddf23982f51afc087781 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 24 Aug 2016 14:33:27 +0300 Subject: usb: gadget: udc: core: don't starve DMA resources Always unmap all SG entries as required by DMA API Fixes: a698908d3b3b ("usb: gadget: add generic map/unmap request utilities") Cc: # v3.4+ Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 934f83881c30..40c04bb25f2f 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -827,7 +827,7 @@ void usb_gadget_unmap_request_by_dev(struct device *dev, return; if (req->num_mapped_sgs) { - dma_unmap_sg(dev, req->sg, req->num_mapped_sgs, + dma_unmap_sg(dev, req->sg, req->num_sgs, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); req->num_mapped_sgs = 0; -- cgit v1.3-18-gd494 From 696fe69d7e631f00f23b0ef1694d9b90058dca54 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 24 Aug 2016 14:32:39 +0300 Subject: usb: dwc3: debug: fix ep name on trace output There was a typo when generating endpoint name which would be very confusing when debugging. Fix it. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 22dfc3dd6a13..33ab2a203c1b 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -192,7 +192,7 @@ dwc3_ep_event_string(const struct dwc3_event_depevt *event) int ret; ret = sprintf(str, "ep%d%s: ", epnum >> 1, - (epnum & 1) ? "in" : "in"); + (epnum & 1) ? "in" : "out"); if (ret < 0) return "UNKNOWN"; -- cgit v1.3-18-gd494 From 6f8245b4e37c2072d3daea24e19dbc0162ffd22c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 24 Aug 2016 14:40:13 +0300 Subject: usb: dwc3: gadget: always decrement by 1 We need to decrement in both cases (enq > deq and enq < deq) Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 122e64df2f4d..7a8d3d822b54 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -884,12 +884,9 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) return DWC3_TRB_NUM - 1; } - trbs_left = dep->trb_dequeue - dep->trb_enqueue; + trbs_left = dep->trb_dequeue - dep->trb_enqueue - 1; trbs_left &= (DWC3_TRB_NUM - 1); - if (dep->trb_dequeue < dep->trb_enqueue) - trbs_left--; - return trbs_left; } -- cgit v1.3-18-gd494 From 468c298ad3ed3f0d94a65f8ca00f6bfc6c2b4e33 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 25 Aug 2016 08:56:44 -0600 Subject: Revert "floppy: fix open(O_ACCMODE) for ioctl-only open" This reverts commit ff06db1efb2ad6db06eb5b99b88a0c15a9cc9b0e. --- drivers/block/floppy.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index b71a9c767009..c557057fe8ae 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3663,6 +3663,11 @@ static int floppy_open(struct block_device *bdev, fmode_t mode) opened_bdev[drive] = bdev; + if (!(mode & (FMODE_READ|FMODE_WRITE))) { + res = -EINVAL; + goto out; + } + res = -ENXIO; if (!floppy_track_buffer) { @@ -3706,15 +3711,13 @@ static int floppy_open(struct block_device *bdev, fmode_t mode) if (UFDCS->rawcmd == 1) UFDCS->rawcmd = 2; - if (mode & (FMODE_READ|FMODE_WRITE)) { - UDRS->last_checked = 0; - clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags); - check_disk_change(bdev); - if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags)) - goto out; - if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags)) - goto out; - } + UDRS->last_checked = 0; + clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags); + check_disk_change(bdev); + if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags)) + goto out; + if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags)) + goto out; res = -EROFS; -- cgit v1.3-18-gd494 From f2791e7eadf437633f30faa51b30878cf15650be Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 25 Aug 2016 08:56:51 -0600 Subject: Revert "floppy: refactor open() flags handling" This reverts commit 09954bad448791ef01202351d437abdd9497a804. --- drivers/block/floppy.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index c557057fe8ae..e3d8e4ced4a2 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3663,11 +3663,6 @@ static int floppy_open(struct block_device *bdev, fmode_t mode) opened_bdev[drive] = bdev; - if (!(mode & (FMODE_READ|FMODE_WRITE))) { - res = -EINVAL; - goto out; - } - res = -ENXIO; if (!floppy_track_buffer) { @@ -3711,20 +3706,21 @@ static int floppy_open(struct block_device *bdev, fmode_t mode) if (UFDCS->rawcmd == 1) UFDCS->rawcmd = 2; - UDRS->last_checked = 0; - clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags); - check_disk_change(bdev); - if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags)) - goto out; - if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags)) - goto out; - - res = -EROFS; - - if ((mode & FMODE_WRITE) && - !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags)) - goto out; - + if (!(mode & FMODE_NDELAY)) { + if (mode & (FMODE_READ|FMODE_WRITE)) { + UDRS->last_checked = 0; + clear_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags); + check_disk_change(bdev); + if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags)) + goto out; + if (test_bit(FD_OPEN_SHOULD_FAIL_BIT, &UDRS->flags)) + goto out; + } + res = -EROFS; + if ((mode & FMODE_WRITE) && + !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags)) + goto out; + } mutex_unlock(&open_lock); mutex_unlock(&floppy_mutex); return 0; -- cgit v1.3-18-gd494 From 07c72d7d54d138eb2ca37709a5a3d55fbcc01536 Mon Sep 17 00:00:00 2001 From: Tatyana Nikolova Date: Wed, 24 Aug 2016 13:59:17 -0500 Subject: i40iw: Send last streaming mode message for loopback connections Send a zero length last streaming mode message for loopback connections to synchronize between accepting QP and connecting QP. This avoids data transfer to start on the accepting QP before the connecting QP is in RTS. Also remove function i40iw_loopback_nop() as it is no longer used. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_cm.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_cm.c b/drivers/infiniband/hw/i40iw/i40iw_cm.c index 64343985e0b7..7ca0638579c0 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_cm.c +++ b/drivers/infiniband/hw/i40iw/i40iw_cm.c @@ -3346,26 +3346,6 @@ int i40iw_cm_disconn(struct i40iw_qp *iwqp) return 0; } -/** - * i40iw_loopback_nop - Send a nop - * @qp: associated hw qp - */ -static void i40iw_loopback_nop(struct i40iw_sc_qp *qp) -{ - u64 *wqe; - u64 header; - - wqe = qp->qp_uk.sq_base->elem; - set_64bit_val(wqe, 0, 0); - set_64bit_val(wqe, 8, 0); - set_64bit_val(wqe, 16, 0); - - header = LS_64(I40IWQP_OP_NOP, I40IWQPSQ_OPCODE) | - LS_64(0, I40IWQPSQ_SIGCOMPL) | - LS_64(qp->qp_uk.swqe_polarity, I40IWQPSQ_VALID); - set_64bit_val(wqe, 24, header); -} - /** * i40iw_qp_disconnect - free qp and close cm * @iwqp: associate qp for the connection @@ -3638,7 +3618,7 @@ int i40iw_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) } else { if (iwqp->page) iwqp->sc_qp.qp_uk.sq_base = kmap(iwqp->page); - i40iw_loopback_nop(&iwqp->sc_qp); + dev->iw_priv_qp_ops->qp_send_lsmm(&iwqp->sc_qp, NULL, 0, 0); } if (iwqp->page) -- cgit v1.3-18-gd494 From 9a5382e8ffe86412f442f6a34fde43f94aae530b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 22 Aug 2016 16:52:21 +0200 Subject: i2c: mux: demux-pinctrl: invalidate properly when switching fails Make sure the index to the active channel is invalidated when switching fails. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 215ac87f606d..b6b9d2582fac 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -107,6 +107,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne of_changeset_revert(&priv->chan[new_chan].chgset); err: dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret); + priv->cur_chan = -EINVAL; return ret; } -- cgit v1.3-18-gd494 From 488d69ea72457c7566b36eb0d484d579f19963c5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 24 Aug 2016 11:19:28 +0200 Subject: i2c: sh_mobile: use proper device with dma_mapping_error We must use the same device we used for mapping. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-sh_mobile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 6fb3e2645992..05b1eeab9cf5 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -610,7 +610,7 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd) return; dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir); - if (dma_mapping_error(pd->dev, dma_addr)) { + if (dma_mapping_error(chan->device->dev, dma_addr)) { dev_dbg(pd->dev, "dma map failed, using PIO\n"); return; } -- cgit v1.3-18-gd494 From c13c29186c59b056d6ec141b5967c2ca3efc0c16 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 24 Aug 2016 11:19:29 +0200 Subject: i2c: rcar: use proper device with dma_mapping_error We must use the same device we used for mapping. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 52407f3c9e1c..9bd849dacee8 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -378,7 +378,7 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv) } dma_addr = dma_map_single(chan->device->dev, buf, len, dir); - if (dma_mapping_error(dev, dma_addr)) { + if (dma_mapping_error(chan->device->dev, dma_addr)) { dev_dbg(dev, "dma map failed, using PIO\n"); return; } -- cgit v1.3-18-gd494 From b31cc4b37e8e33e84e9f990d0d84387f37ef01a1 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 15 Aug 2016 00:47:22 +0200 Subject: i2c: bcm-kona: fix inconsistent indenting smatch rightfully says: drivers/i2c/busses/i2c-bcm-kona.c:646 bcm_kona_i2c_xfer() warn: inconsistent indenting Signed-off-by: Wolfram Sang Reviewed-by: Tim Kryger --- drivers/i2c/busses/i2c-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index f98743277e3c..258cb9a40ab3 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -643,7 +643,7 @@ static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter, if (rc < 0) { dev_err(dev->device, "restart cmd failed rc = %d\n", rc); - goto xfer_send_stop; + goto xfer_send_stop; } } -- cgit v1.3-18-gd494 From 2b721f20770ccbca4d3dad58e1bd44aa570efb3f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Aug 2016 18:52:38 +0200 Subject: drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION For reasons that entirely elude me fb.h exposes all the structures, even when it is not enabled. Except for special stuff like fb_defio. Which means all the drivers which haven't yet switched over to the defio support in the helpers and still roll their own, will fail to compile when fbdev emulation is disabled. Protect just those bits, as a gnarly reminder that conversion to the core defio helpers would be good. Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_fb.c | 4 ++++ drivers/gpu/drm/udl/udl_fb.c | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c index df2657051afd..28c1423049c5 100644 --- a/drivers/gpu/drm/qxl/qxl_fb.c +++ b/drivers/gpu/drm/qxl/qxl_fb.c @@ -73,10 +73,12 @@ static void qxl_fb_image_init(struct qxl_fb_image *qxl_fb_image, } } +#ifdef CONFIG_DRM_FBDEV_EMULATION static struct fb_deferred_io qxl_defio = { .delay = QXL_DIRTY_DELAY, .deferred_io = drm_fb_helper_deferred_io, }; +#endif static struct fb_ops qxlfb_ops = { .owner = THIS_MODULE, @@ -313,8 +315,10 @@ static int qxlfb_create(struct qxl_fbdev *qfbdev, goto out_destroy_fbi; } +#ifdef CONFIG_DRM_FBDEV_EMULATION info->fbdefio = &qxl_defio; fb_deferred_io_init(info); +#endif qdev->fbdev_info = info; qdev->fbdev_qfb = &qfbdev->qfb; diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c index d5df555aeba0..9688bfa92ccd 100644 --- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -203,6 +203,7 @@ static int udl_fb_open(struct fb_info *info, int user) ufbdev->fb_count++; +#ifdef CONFIG_DRM_FBDEV_EMULATION if (fb_defio && (info->fbdefio == NULL)) { /* enable defio at last moment if not disabled by client */ @@ -218,6 +219,7 @@ static int udl_fb_open(struct fb_info *info, int user) info->fbdefio = fbdefio; fb_deferred_io_init(info); } +#endif pr_notice("open /dev/fb%d user=%d fb_info=%p count=%d\n", info->node, user, info, ufbdev->fb_count); @@ -235,12 +237,14 @@ static int udl_fb_release(struct fb_info *info, int user) ufbdev->fb_count--; +#ifdef CONFIG_DRM_FBDEV_EMULATION if ((ufbdev->fb_count == 0) && (info->fbdefio)) { fb_deferred_io_cleanup(info); kfree(info->fbdefio); info->fbdefio = NULL; info->fbops->fb_mmap = udl_fb_mmap; } +#endif pr_warn("released /dev/fb%d user=%d count=%d\n", info->node, user, ufbdev->fb_count); -- cgit v1.3-18-gd494 From 869c554808ccf7ddd25be5317073b88ceddb8507 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 25 Aug 2016 14:11:43 -0600 Subject: mmc: fix use-after-free of struct request We call mmc_req_is_special() after having processed a request, but it could be freed after that. Check that ahead of time, and use the cached value. Reported-by: Hans de Goede Tested-by: Hans de Goede Fixes: c2df40dfb8c0 ("drivers: use req op accessor") Signed-off-by: Jens Axboe --- drivers/mmc/card/block.c | 4 ++-- drivers/mmc/card/queue.c | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 82503e6f04b3..2206d4477dbb 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -2151,6 +2151,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_card *card = md->queue.card; struct mmc_host *host = card->host; unsigned long flags; + bool req_is_special = mmc_req_is_special(req); if (req && !mq->mqrq_prev->req) /* claim host only for the first request */ @@ -2191,8 +2192,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) } out: - if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || - mmc_req_is_special(req)) + if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || req_is_special) /* * Release host when there are no more requests * and after special request(discard, flush) is done. diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 29578e98603d..708057261b38 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -65,6 +65,8 @@ static int mmc_queue_thread(void *d) spin_unlock_irq(q->queue_lock); if (req || mq->mqrq_prev->req) { + bool req_is_special = mmc_req_is_special(req); + set_current_state(TASK_RUNNING); mq->issue_fn(mq, req); cond_resched(); @@ -80,7 +82,7 @@ static int mmc_queue_thread(void *d) * has been finished. Do not assign it to previous * request. */ - if (mmc_req_is_special(req)) + if (req_is_special) mq->mqrq_cur->req = NULL; mq->mqrq_prev->brq.mrq.data = NULL; -- cgit v1.3-18-gd494 From 4f101c47791cdcb831b3ef1f831b1cc51e4fe03c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 24 Aug 2016 11:01:20 -0700 Subject: net: dsa: bcm_sf2: Fix race condition while unmasking interrupts We kept shadow copies of which interrupt sources we have enabled and disabled, but due to an order bug in how intrl2_mask_clear was defined, we could run into the following scenario: CPU0 CPU1 intrl2_1_mask_clear(..) sets INTRL2_CPU_MASK_CLEAR bcm_sf2_switch_1_isr read INTRL2_CPU_STATUS and masks with stale irq1_mask value updates irq1_mask value Which would make us loop again and again trying to process and interrupt we are not clearing since our copy of whether it was enabled before still indicates it was not. Fix this by updating the shadow copy first, and then unasking at the HW level. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h index 463bed8cbe4c..dd446e466699 100644 --- a/drivers/net/dsa/bcm_sf2.h +++ b/drivers/net/dsa/bcm_sf2.h @@ -205,8 +205,8 @@ static inline void name##_writeq(struct bcm_sf2_priv *priv, u64 val, \ static inline void intrl2_##which##_mask_clear(struct bcm_sf2_priv *priv, \ u32 mask) \ { \ - intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR); \ priv->irq##which##_mask &= ~(mask); \ + intrl2_##which##_writel(priv, mask, INTRL2_CPU_MASK_CLEAR); \ } \ static inline void intrl2_##which##_mask_set(struct bcm_sf2_priv *priv, \ u32 mask) \ -- cgit v1.3-18-gd494 From c3e70edd7c2eed6acd234627a6007627f5c76e8e Mon Sep 17 00:00:00 2001 From: Xander Huff Date: Wed, 24 Aug 2016 16:47:53 -0500 Subject: Revert "phy: IRQ cannot be shared" This reverts: commit 33c133cc7598 ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by: Xander Huff Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c5dc2c363f96..c6f66832a1a6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -722,8 +722,10 @@ phy_err: int phy_start_interrupts(struct phy_device *phydev) { atomic_set(&phydev->irq_disable, 0); - if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt", - phydev) < 0) { + if (request_irq(phydev->irq, phy_interrupt, + IRQF_SHARED, + "phy_interrupt", + phydev) < 0) { pr_warn("%s: Can't get IRQ %d (PHY)\n", phydev->mdio.bus->name, phydev->irq); phydev->irq = PHY_POLL; -- cgit v1.3-18-gd494 From f38ff2ee7727994685494bcc4d7c274b35b5418a Mon Sep 17 00:00:00 2001 From: Anjali Singhai Jain Date: Wed, 24 Aug 2016 17:51:53 -0700 Subject: i40e: Change some init flow for the client This change makes a common flow for Client instance open during init and reset path. The Client subtask can handle both the cases instead of making a separate notify_client_of_open call. Also it may fix a bug during reset where the service task was leaking some memory and causing issues. Change-Id: I7232a32fd52b82e863abb54266fa83122f80a0cd Signed-off-by: Anjali Singhai Jain Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_client.c | 41 ++++++++++++++++++++------- drivers/net/ethernet/intel/i40e/i40e_main.c | 1 - 2 files changed, 30 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_client.c b/drivers/net/ethernet/intel/i40e/i40e_client.c index e1370c556a3c..618f18436618 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_client.c +++ b/drivers/net/ethernet/intel/i40e/i40e_client.c @@ -199,6 +199,7 @@ void i40e_notify_client_of_l2_param_changes(struct i40e_vsi *vsi) void i40e_notify_client_of_netdev_open(struct i40e_vsi *vsi) { struct i40e_client_instance *cdev; + int ret = 0; if (!vsi) return; @@ -211,7 +212,14 @@ void i40e_notify_client_of_netdev_open(struct i40e_vsi *vsi) "Cannot locate client instance open routine\n"); continue; } - cdev->client->ops->open(&cdev->lan_info, cdev->client); + if (!(test_bit(__I40E_CLIENT_INSTANCE_OPENED, + &cdev->state))) { + ret = cdev->client->ops->open(&cdev->lan_info, + cdev->client); + if (!ret) + set_bit(__I40E_CLIENT_INSTANCE_OPENED, + &cdev->state); + } } } mutex_unlock(&i40e_client_instance_mutex); @@ -407,12 +415,14 @@ struct i40e_vsi *i40e_vsi_lookup(struct i40e_pf *pf, * i40e_client_add_instance - add a client instance struct to the instance list * @pf: pointer to the board struct * @client: pointer to a client struct in the client list. + * @existing: if there was already an existing instance * - * Returns cdev ptr on success, NULL on failure + * Returns cdev ptr on success or if already exists, NULL on failure **/ static struct i40e_client_instance *i40e_client_add_instance(struct i40e_pf *pf, - struct i40e_client *client) + struct i40e_client *client, + bool *existing) { struct i40e_client_instance *cdev; struct netdev_hw_addr *mac = NULL; @@ -421,7 +431,7 @@ struct i40e_client_instance *i40e_client_add_instance(struct i40e_pf *pf, mutex_lock(&i40e_client_instance_mutex); list_for_each_entry(cdev, &i40e_client_instances, list) { if ((cdev->lan_info.pf == pf) && (cdev->client == client)) { - cdev = NULL; + *existing = true; goto out; } } @@ -505,6 +515,7 @@ void i40e_client_subtask(struct i40e_pf *pf) { struct i40e_client_instance *cdev; struct i40e_client *client; + bool existing = false; int ret = 0; if (!(pf->flags & I40E_FLAG_SERVICE_CLIENT_REQUESTED)) @@ -528,18 +539,25 @@ void i40e_client_subtask(struct i40e_pf *pf) /* check if L2 VSI is up, if not we are not ready */ if (test_bit(__I40E_DOWN, &pf->vsi[pf->lan_vsi]->state)) continue; + } else { + dev_warn(&pf->pdev->dev, "This client %s is being instanciated at probe\n", + client->name); } /* Add the client instance to the instance list */ - cdev = i40e_client_add_instance(pf, client); + cdev = i40e_client_add_instance(pf, client, &existing); if (!cdev) continue; - /* Also up the ref_cnt of no. of instances of this client */ - atomic_inc(&client->ref_cnt); - dev_info(&pf->pdev->dev, "Added instance of Client %s to PF%d bus=0x%02x func=0x%02x\n", - client->name, pf->hw.pf_id, - pf->hw.bus.device, pf->hw.bus.func); + if (!existing) { + /* Also up the ref_cnt for no. of instances of this + * client. + */ + atomic_inc(&client->ref_cnt); + dev_info(&pf->pdev->dev, "Added instance of Client %s to PF%d bus=0x%02x func=0x%02x\n", + client->name, pf->hw.pf_id, + pf->hw.bus.device, pf->hw.bus.func); + } /* Send an Open request to the client */ atomic_inc(&cdev->ref_cnt); @@ -588,7 +606,8 @@ int i40e_lan_add_device(struct i40e_pf *pf) pf->hw.pf_id, pf->hw.bus.device, pf->hw.bus.func); /* Since in some cases register may have happened before a device gets - * added, we can schedule a subtask to go initiate the clients. + * added, we can schedule a subtask to go initiate the clients if + * they can be launched at probe time. */ pf->flags |= I40E_FLAG_SERVICE_CLIENT_REQUESTED; i40e_service_event_schedule(pf); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index c6ac7a61812f..828ed28c3c14 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5431,7 +5431,6 @@ int i40e_open(struct net_device *netdev) wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16); udp_tunnel_get_rx_info(netdev); - i40e_notify_client_of_netdev_open(vsi); return 0; } -- cgit v1.3-18-gd494 From b628d611a2a53858263fc419dba552f32431dba4 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Thu, 25 Aug 2016 09:45:39 +0800 Subject: 8139cp: Fix one possible deadloop in cp_rx_poll When cp_rx_poll does not get enough packet, it will check the rx interrupt status again. If so, it will jumpt to rx_status_loop again. But the goto jump resets the rx variable as zero too. As a result, it causes one possible deadloop. Assume this case, rx_status_loop only gets the packet count which is less than budget, and (cpr16(IntrStatus) & cp_rx_intr_mask) condition is always true. It causes the deadloop happens and system is blocked. Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index deae10d7426d..5297bf77211c 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -467,8 +467,8 @@ static int cp_rx_poll(struct napi_struct *napi, int budget) unsigned int rx_tail = cp->rx_tail; int rx; -rx_status_loop: rx = 0; +rx_status_loop: cpw16(IntrStatus, cp_rx_intr_mask); while (rx < budget) { -- cgit v1.3-18-gd494 From 0811ef7e2f5470833a353426a6fbe0b845aea926 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 11 Aug 2016 10:50:41 +0100 Subject: bus: arm-ccn: fix PMU interrupt flags Currently the IRQ core is permitted to make the CCN PMU IRQ handler threaded, and will allow userspace to change the CPU affinity of the interrupt behind our back. Both of these could violate our synchronisation requirements with the core perf code, which relies upon strict CPU affinity and disabling of interrupts to guarantee mutual exclusion in some cases. As with the CPU PMU drivers, we should request the interrupt with IRQF_NOBALANCING and IRQF_NO_THREAD, to avoid these issues. Signed-off-by: Mark Rutland Acked-by: Pawel Moll Reviewed-by: Will Deacon Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 02f81e308dff..c826bb286054 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -1496,8 +1496,9 @@ static int arm_ccn_probe(struct platform_device *pdev) /* Can set 'disable' bits, so can acknowledge interrupts */ writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE, ccn->base + CCN_MN_ERRINT_STATUS); - err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0, - dev_name(ccn->dev), ccn); + err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, + IRQF_NOBALANCING | IRQF_NO_THREAD, + dev_name(ccn->dev), ccn); if (err) return err; -- cgit v1.3-18-gd494 From 5b1e01f3ce15d3a8f2af5d38cc31f0d5c3c11dae Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 11 Aug 2016 10:50:42 +0100 Subject: bus: arm-ccn: fix hrtimer registration The CCN PMU driver has a single hrtimer, used to simulate a periodic interrupt on systems where the overflow interrupt is not possible to use. The hrtimer is started when any event is started, and cancelled when any event is stopped. Thus, stopping a single event is sufficient to disable to hrtimer, and overflows (of other events) may be lost. To avoid this, this patch reworks the hrtimer start/cancel to only occur when the first event is added to a PMU, and the last event removed, making use of the existing bitmap counting active events. Signed-off-by: Mark Rutland Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index c826bb286054..12c1fd1bc398 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -940,15 +940,6 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags) arm_ccn_pmu_read_counter(ccn, hw->idx)); hw->state = 0; - /* - * Pin the timer, so that the overflows are handled by the chosen - * event->cpu (this is the same one as presented in "cpumask" - * attribute). - */ - if (!ccn->irq) - hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(), - HRTIMER_MODE_REL_PINNED); - /* Set the DT bus input, engaging the counter */ arm_ccn_pmu_xp_dt_config(event, 1); } @@ -962,9 +953,6 @@ static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags) /* Disable counting, setting the DT bus to pass-through mode */ arm_ccn_pmu_xp_dt_config(event, 0); - if (!ccn->irq) - hrtimer_cancel(&ccn->dt.hrtimer); - /* Let the DT bus drain */ timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) + ccn->num_xps; @@ -1122,15 +1110,31 @@ static void arm_ccn_pmu_event_config(struct perf_event *event) spin_unlock(&ccn->dt.config_lock); } +static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn) +{ + return bitmap_weight(ccn->dt.pmu_counters_mask, + CCN_NUM_PMU_EVENT_COUNTERS + 1); +} + static int arm_ccn_pmu_event_add(struct perf_event *event, int flags) { int err; struct hw_perf_event *hw = &event->hw; + struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu); err = arm_ccn_pmu_event_alloc(event); if (err) return err; + /* + * Pin the timer, so that the overflows are handled by the chosen + * event->cpu (this is the same one as presented in "cpumask" + * attribute). + */ + if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1) + hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(), + HRTIMER_MODE_REL_PINNED); + arm_ccn_pmu_event_config(event); hw->state = PERF_HES_STOPPED; @@ -1143,9 +1147,14 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags) static void arm_ccn_pmu_event_del(struct perf_event *event, int flags) { + struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu); + arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE); arm_ccn_pmu_event_release(event); + + if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0) + hrtimer_cancel(&ccn->dt.hrtimer); } static void arm_ccn_pmu_event_read(struct perf_event *event) -- cgit v1.3-18-gd494 From d662ed2e50c9dab1d4c25e80fa3e01ebe257bd65 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Thu, 11 Aug 2016 10:50:43 +0100 Subject: bus: arm-ccn: make event groups reliable The CCN PMU driver leaves the counting logic always enabled, and thus events are enabled while groups are manipulated. As each event is stopped and read individually, this leads to arbitrary skew across event groups, which can be seen if counting several identical events. To avoid this, implement pmu_{enable,disable} callbacks to stop and start all counters atomically around event manipulation. As the counters are now stopped, we cannot poll the cycle counter to wait for events to drain from the bus. However, as the counters are stopped and the events will not be read regardless, we can simply allow the bus to drain naturally. Signed-off-by: Mark Rutland Signed-off-by: Pawel Moll --- drivers/bus/arm-ccn.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c index 12c1fd1bc398..884c0305e290 100644 --- a/drivers/bus/arm-ccn.c +++ b/drivers/bus/arm-ccn.c @@ -946,20 +946,11 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags) static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags) { - struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu); struct hw_perf_event *hw = &event->hw; - u64 timeout; /* Disable counting, setting the DT bus to pass-through mode */ arm_ccn_pmu_xp_dt_config(event, 0); - /* Let the DT bus drain */ - timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) + - ccn->num_xps; - while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) < - timeout) - cpu_relax(); - if (flags & PERF_EF_UPDATE) arm_ccn_pmu_event_update(event); @@ -1162,6 +1153,24 @@ static void arm_ccn_pmu_event_read(struct perf_event *event) arm_ccn_pmu_event_update(event); } +static void arm_ccn_pmu_enable(struct pmu *pmu) +{ + struct arm_ccn *ccn = pmu_to_arm_ccn(pmu); + + u32 val = readl(ccn->dt.base + CCN_DT_PMCR); + val |= CCN_DT_PMCR__PMU_EN; + writel(val, ccn->dt.base + CCN_DT_PMCR); +} + +static void arm_ccn_pmu_disable(struct pmu *pmu) +{ + struct arm_ccn *ccn = pmu_to_arm_ccn(pmu); + + u32 val = readl(ccn->dt.base + CCN_DT_PMCR); + val &= ~CCN_DT_PMCR__PMU_EN; + writel(val, ccn->dt.base + CCN_DT_PMCR); +} + static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt) { u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR); @@ -1284,6 +1293,8 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn) .start = arm_ccn_pmu_event_start, .stop = arm_ccn_pmu_event_stop, .read = arm_ccn_pmu_event_read, + .pmu_enable = arm_ccn_pmu_enable, + .pmu_disable = arm_ccn_pmu_disable, }; /* No overflow interrupt? Have to use a timer instead. */ -- cgit v1.3-18-gd494 From 699e36e5b8e9f77b2be4c23f0b309e53be4b2880 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 23 Aug 2016 10:44:02 +0200 Subject: clocksource/drivers/timer-atmel-pit: Enable mck clock mck is needed to get the PIT working. Explicitly prepare_enable it instead of assuming it is enabled. This solves an issue where the system is freezing when the ETM/ETB drivers are enabled. Reported-by: Olivier Schonken Reviewed-by: Boris Brezillon Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-atmel-pit.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index 1ffac0cb0cb7..3494bc5a21d5 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -261,6 +261,12 @@ static int __init at91sam926x_pit_dt_init(struct device_node *node) return PTR_ERR(data->mck); } + ret = clk_prepare_enable(data->mck); + if (ret) { + pr_err("Unable to enable mck\n"); + return ret; + } + /* Get the interrupts property */ data->irq = irq_of_parse_and_map(node, 0); if (!data->irq) { -- cgit v1.3-18-gd494 From 4d0e701659aa869a445823149e172e23faa6edac Mon Sep 17 00:00:00 2001 From: Marcin Nowakowski Date: Wed, 17 Aug 2016 12:22:33 +0200 Subject: drivers/clocksource/pistachio: Fix memory corruption in init Driver init code incorrectly uses the block base address and as a result clears clocksource structure's fields instead of the hardware registers. Commit 09a998201649 ("timekeeping: Lift clocksource cacheline restriction") has changed the offsets within pistachio_clocksource structure and what has previously gone unnoticed now leads to a kernel panic during boot. Signed-off-by: Marcin Nowakowski Signed-off-by: Daniel Lezcano --- drivers/clocksource/time-pistachio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/time-pistachio.c b/drivers/clocksource/time-pistachio.c index a7d9a08e4b0e..a8e6c7df853d 100644 --- a/drivers/clocksource/time-pistachio.c +++ b/drivers/clocksource/time-pistachio.c @@ -202,10 +202,10 @@ static int __init pistachio_clksrc_of_init(struct device_node *node) rate = clk_get_rate(fast_clk); /* Disable irq's for clocksource usage */ - gpt_writel(&pcs_gpt.base, 0, TIMER_IRQ_MASK, 0); - gpt_writel(&pcs_gpt.base, 0, TIMER_IRQ_MASK, 1); - gpt_writel(&pcs_gpt.base, 0, TIMER_IRQ_MASK, 2); - gpt_writel(&pcs_gpt.base, 0, TIMER_IRQ_MASK, 3); + gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 0); + gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 1); + gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 2); + gpt_writel(pcs_gpt.base, 0, TIMER_IRQ_MASK, 3); /* Enable timer block */ writel(TIMER_ME_GLOBAL, pcs_gpt.base); -- cgit v1.3-18-gd494 From b53e7d000d9e6e9fd2c6eb6b82d2783c67fd599e Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 25 Aug 2016 14:26:59 +0800 Subject: clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function The bootloader (U-boot) sometimes uses this timer for various delays. It uses it as a ongoing counter, and does comparisons on the current counter value. The timer counter is never stopped. In some cases when the user interacts with the bootloader, or lets it idle for some time before loading Linux, the timer may expire, and an interrupt will be pending. This results in an unexpected interrupt when the timer interrupt is enabled by the kernel, at which point the event_handler isn't set yet. This results in a NULL pointer dereference exception, panic, and no way to reboot. Clear any pending interrupts after we stop the timer in the probe function to avoid this. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Daniel Lezcano Acked-by: Maxime Ripard --- drivers/clocksource/sun4i_timer.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c index 97669ee4df2a..c83452cacb41 100644 --- a/drivers/clocksource/sun4i_timer.c +++ b/drivers/clocksource/sun4i_timer.c @@ -123,12 +123,16 @@ static struct clock_event_device sun4i_clockevent = { .set_next_event = sun4i_clkevt_next_event, }; +static void sun4i_timer_clear_interrupt(void) +{ + writel(TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_ST_REG); +} static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = (struct clock_event_device *)dev_id; - writel(0x1, timer_base + TIMER_IRQ_ST_REG); + sun4i_timer_clear_interrupt(); evt->event_handler(evt); return IRQ_HANDLED; @@ -208,6 +212,9 @@ static int __init sun4i_timer_init(struct device_node *node) /* Make sure timer is stopped before playing with interrupts */ sun4i_clkevt_time_stop(0); + /* clear timer0 interrupt */ + sun4i_timer_clear_interrupt(); + sun4i_clockevent.cpumask = cpu_possible_mask; sun4i_clockevent.irq = irq; -- cgit v1.3-18-gd494 From 866e0f4d73390ee6f5cd68aa92cf74eef3a2b0f2 Mon Sep 17 00:00:00 2001 From: Mustafa Ismail Date: Thu, 25 Aug 2016 11:52:47 -0500 Subject: i40iw: Update hw_iwarp_state Update iwqp->hw_iwarp_state to reflect the new state of the CQP modify QP operation. This avoids reissuing a CQP operation to modify a QP to a state that it is already in. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Reported-by: Stefan Assmann Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_hw.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_hw.c b/drivers/infiniband/hw/i40iw/i40iw_hw.c index 3ee0cad96bc6..0c92a40b3e86 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_hw.c +++ b/drivers/infiniband/hw/i40iw/i40iw_hw.c @@ -265,6 +265,7 @@ void i40iw_next_iw_state(struct i40iw_qp *iwqp, info.dont_send_fin = false; if (iwqp->sc_qp.term_flags && (state == I40IW_QP_STATE_ERROR)) info.reset_tcp_conn = true; + iwqp->hw_iwarp_state = state; i40iw_hw_modify_qp(iwqp->iwdev, iwqp, &info, 0); } -- cgit v1.3-18-gd494 From b71121b4b70a995c0b794026e84c880c4f26c361 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Thu, 25 Aug 2016 11:53:24 -0500 Subject: i40iw: Receive notification events correctly Device notifications are not received after the first interface is closed; since there is an unregister for notifications on every interface close. Correct this by unregistering for device notifications only when the last interface is closed. Also, make all operations on the i40iw_notifiers_registered atomic as it can be read/modified concurrently. Fixes: 8e06af711bf2 ("i40iw: add main, hdr, status") Signed-off-by: Mustafa Ismail Signed-off-by: Shiraz Saleem Signed-off-by: Doug Ledford --- drivers/infiniband/hw/i40iw/i40iw_main.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/i40iw/i40iw_main.c b/drivers/infiniband/hw/i40iw/i40iw_main.c index 0cbbe4038298..445e230d5ff8 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_main.c +++ b/drivers/infiniband/hw/i40iw/i40iw_main.c @@ -100,7 +100,7 @@ static struct notifier_block i40iw_net_notifier = { .notifier_call = i40iw_net_event }; -static int i40iw_notifiers_registered; +static atomic_t i40iw_notifiers_registered; /** * i40iw_find_i40e_handler - find a handler given a client info @@ -1342,12 +1342,11 @@ exit: */ static void i40iw_register_notifiers(void) { - if (!i40iw_notifiers_registered) { + if (atomic_inc_return(&i40iw_notifiers_registered) == 1) { register_inetaddr_notifier(&i40iw_inetaddr_notifier); register_inet6addr_notifier(&i40iw_inetaddr6_notifier); register_netevent_notifier(&i40iw_net_notifier); } - i40iw_notifiers_registered++; } /** @@ -1429,8 +1428,7 @@ static void i40iw_deinit_device(struct i40iw_device *iwdev, bool reset, bool del i40iw_del_macip_entry(iwdev, (u8)iwdev->mac_ip_table_idx); /* fallthrough */ case INET_NOTIFIER: - if (i40iw_notifiers_registered > 0) { - i40iw_notifiers_registered--; + if (!atomic_dec_return(&i40iw_notifiers_registered)) { unregister_netevent_notifier(&i40iw_net_notifier); unregister_inetaddr_notifier(&i40iw_inetaddr_notifier); unregister_inet6addr_notifier(&i40iw_inetaddr6_notifier); -- cgit v1.3-18-gd494 From 61a28d2b690a8b6c383a075a12d62d711850f9d7 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Fri, 26 Aug 2016 06:49:25 +0200 Subject: IB/hfi1: Clean up type used and casting In all other places in this file where 'find_first_bit' is called, port_num is defined as a 'u8' and no casting is done. Do the same here in order to be more consistent. Signed-off-by: Christophe JAILLET Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/mad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 39e42c373a01..9912d2ca3ded 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -2604,7 +2604,7 @@ static int pma_get_opa_datacounters(struct opa_pma_mad *pmp, u8 lq, num_vls; u8 res_lli, res_ler; u64 port_mask; - unsigned long port_num; + u8 port_num; unsigned long vl; u32 vl_select_mask; int vfi; @@ -2640,7 +2640,7 @@ static int pma_get_opa_datacounters(struct opa_pma_mad *pmp, port_num = find_first_bit((unsigned long *)&port_mask, sizeof(port_mask)); - if ((u8)port_num != port) { + if (port_num != port) { pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; return reply((struct ib_mad_hdr *)pmp); } -- cgit v1.3-18-gd494 From c234af5875ffeab39d5a2c4230a477a35987a484 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 25 Aug 2016 07:51:10 +0100 Subject: net: hns: dereference ppe_cb->ppe_common_cb if it is non-null ppe_cb->ppe_common_cb is being dereferenced before a null check is being made on it. If ppe_cb->ppe_common_cb is null then we end up with a null pointer dereference when assigning dsaf_dev. Fix this by moving the initialisation of dsaf_dev once we know ppe_cb->ppe_common_cb is OK to dereference. Signed-off-by: Colin Ian King Acked-by: Yisen Zhuang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c index ff8b6a468b24..6ea872287307 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c @@ -328,9 +328,10 @@ static void hns_ppe_init_hw(struct hns_ppe_cb *ppe_cb) static void hns_ppe_uninit_hw(struct hns_ppe_cb *ppe_cb) { u32 port; - struct dsaf_device *dsaf_dev = ppe_cb->ppe_common_cb->dsaf_dev; if (ppe_cb->ppe_common_cb) { + struct dsaf_device *dsaf_dev = ppe_cb->ppe_common_cb->dsaf_dev; + port = ppe_cb->index; dsaf_dev->misc_op->ppe_srst(dsaf_dev, port, 0); } -- cgit v1.3-18-gd494 From c15e07b02bf0450bc8e60f2cc51cb42daa371417 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 25 Aug 2016 18:30:52 +0200 Subject: team: loadbalance: push lacpdus to exact delivery When team is in bridge and LACP is utilized, LACPDU packets are pushed to userspace using raw socket and there they are processed. However, since 8626c56c8279b, LACPDU skbs are dropped by bridge rx_handler so they never reach packet handlers in rx path. Fix this by explicity treat LACPDUs to be pushed to exact delivery in team rx_handler. Reported-by: Ido Schimmel Fixes: 8626c56c8279b ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team_mode_loadbalance.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/net/team/team_mode_loadbalance.c b/drivers/net/team/team_mode_loadbalance.c index cdb19b385d42..b228bea7931f 100644 --- a/drivers/net/team/team_mode_loadbalance.c +++ b/drivers/net/team/team_mode_loadbalance.c @@ -14,9 +14,23 @@ #include #include #include +#include #include #include +static rx_handler_result_t lb_receive(struct team *team, struct team_port *port, + struct sk_buff *skb) +{ + if (unlikely(skb->protocol == htons(ETH_P_SLOW))) { + /* LACPDU packets should go to exact delivery */ + const unsigned char *dest = eth_hdr(skb)->h_dest; + + if (is_link_local_ether_addr(dest) && dest[5] == 0x02) + return RX_HANDLER_EXACT; + } + return RX_HANDLER_ANOTHER; +} + struct lb_priv; typedef struct team_port *lb_select_tx_port_func_t(struct team *, @@ -652,6 +666,7 @@ static const struct team_mode_ops lb_mode_ops = { .port_enter = lb_port_enter, .port_leave = lb_port_leave, .port_disabled = lb_port_disabled, + .receive = lb_receive, .transmit = lb_transmit, }; -- cgit v1.3-18-gd494 From d0e5845561c238619de9f5b77e0d763f4c331ca5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 25 Aug 2016 15:17:14 -0700 Subject: dax: fix device-dax region base The data offset for a dax region needs to account for a reservation in the resource range. Otherwise, device-dax is allowing mappings directly into the memmap or device-info-block area with crash signatures like the following: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: get_zone_device_page+0x11/0x30 Call Trace: follow_devmap_pmd+0x298/0x2c0 follow_page_mask+0x275/0x530 __get_user_pages+0xe3/0x750 __gfn_to_pfn_memslot+0x1b2/0x450 [kvm] tdp_page_fault+0x130/0x280 [kvm] kvm_mmu_page_fault+0x5f/0xf0 [kvm] handle_ept_violation+0x94/0x180 [kvm_intel] vmx_handle_exit+0x1d3/0x1440 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm] kvm_vcpu_ioctl+0x33c/0x620 [kvm] do_vfs_ioctl+0xa2/0x5d0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa4 Fixes: ab68f2622136 ("/dev/dax, pmem: direct access to persistent memory") Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams Reported-by: Abhilash Kumar Mulumudi Reported-by: Toshi Kani Tested-by: Toshi Kani Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dax/pmem.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/dax/pmem.c b/drivers/dax/pmem.c index dfb168568af1..1f01e98c83c7 100644 --- a/drivers/dax/pmem.c +++ b/drivers/dax/pmem.c @@ -116,6 +116,9 @@ static int dax_pmem_probe(struct device *dev) if (rc) return rc; + /* adjust the dax_region resource to the start of data */ + res.start += le64_to_cpu(pfn_sb->dataoff); + nd_region = to_nd_region(dev->parent); dax_region = alloc_dax_region(dev, nd_region->id, &res, le32_to_cpu(pfn_sb->align), addr, PFN_DEV|PFN_MAP); -- cgit v1.3-18-gd494 From e70c70c38d7a5ced76fc8b1c4a7ccee76e9c2911 Mon Sep 17 00:00:00 2001 From: Andrew Rybchenko Date: Fri, 26 Aug 2016 11:19:34 +0100 Subject: sfc: fix potential stack corruption from running past stat bitmask On 32-bit systems, mask is only an array of 3 longs, not 4, so don't try to write to mask[3]. Also include build-time checks in case the size of the bitmask changes. Fixes: 3c36a2aded8c ("sfc: display vadaptor statistics for all interfaces") Signed-off-by: Edward Cree Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index f658fee74f18..e00a669e9e09 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -1517,13 +1517,14 @@ static void efx_ef10_get_stat_mask(struct efx_nic *efx, unsigned long *mask) } #if BITS_PER_LONG == 64 + BUILD_BUG_ON(BITS_TO_LONGS(EF10_STAT_COUNT) != 2); mask[0] = raw_mask[0]; mask[1] = raw_mask[1]; #else + BUILD_BUG_ON(BITS_TO_LONGS(EF10_STAT_COUNT) != 3); mask[0] = raw_mask[0] & 0xffffffff; mask[1] = raw_mask[0] >> 32; mask[2] = raw_mask[1] & 0xffffffff; - mask[3] = raw_mask[1] >> 32; #endif } -- cgit v1.3-18-gd494 From f5b7b559e14881b27d76f9c97817ec82bfc48827 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Wed, 24 Aug 2016 12:25:56 +0300 Subject: nvme-rdma: Get rid of duplicate variable We already have need_inval in ib_mr, lets use that instead. Signed-off-by: Sagi Grimberg Reviewed-by: Christoph Hellwig --- drivers/nvme/host/rdma.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index c133256fd745..881ac28575ef 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -77,7 +77,6 @@ struct nvme_rdma_request { u32 num_sge; int nents; bool inline_data; - bool need_inval; struct ib_reg_wr reg_wr; struct ib_cqe reg_cqe; struct nvme_rdma_queue *queue; @@ -286,7 +285,7 @@ static int nvme_rdma_reinit_request(void *data, struct request *rq) struct nvme_rdma_request *req = blk_mq_rq_to_pdu(rq); int ret = 0; - if (!req->need_inval) + if (!req->mr->need_inval) goto out; ib_dereg_mr(req->mr); @@ -298,7 +297,7 @@ static int nvme_rdma_reinit_request(void *data, struct request *rq) req->mr = NULL; } - req->need_inval = false; + req->mr->need_inval = false; out: return ret; @@ -850,7 +849,7 @@ static void nvme_rdma_unmap_data(struct nvme_rdma_queue *queue, if (!blk_rq_bytes(rq)) return; - if (req->need_inval) { + if (req->mr->need_inval) { res = nvme_rdma_inv_rkey(queue, req); if (res < 0) { dev_err(ctrl->ctrl.device, @@ -936,7 +935,7 @@ static int nvme_rdma_map_sg_fr(struct nvme_rdma_queue *queue, IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_WRITE; - req->need_inval = true; + req->mr->need_inval = true; sg->addr = cpu_to_le64(req->mr->iova); put_unaligned_le24(req->mr->length, sg->length); @@ -959,7 +958,7 @@ static int nvme_rdma_map_data(struct nvme_rdma_queue *queue, req->num_sge = 1; req->inline_data = false; - req->need_inval = false; + req->mr->need_inval = false; c->common.flags |= NVME_CMD_SGL_METABUF; @@ -1146,7 +1145,7 @@ static int nvme_rdma_process_nvme_rsp(struct nvme_rdma_queue *queue, if ((wc->wc_flags & IB_WC_WITH_INVALIDATE) && wc->ex.invalidate_rkey == req->mr->rkey) - req->need_inval = false; + req->mr->need_inval = false; blk_mq_complete_request(rq, status); @@ -1476,7 +1475,7 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, if (rq->cmd_type == REQ_TYPE_FS && req_op(rq) == REQ_OP_FLUSH) flush = true; ret = nvme_rdma_post_send(queue, sqe, req->sge, req->num_sge, - req->need_inval ? &req->reg_wr.wr : NULL, flush); + req->mr->need_inval ? &req->reg_wr.wr : NULL, flush); if (ret) { nvme_rdma_unmap_data(queue, rq); goto err; -- cgit v1.3-18-gd494 From 4d8c6a7946d53648d9ed0e3852a1c81ce07d40db Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 26 Aug 2016 00:37:52 +0300 Subject: nvme-rdma: Get rid of redundant defines Signed-off-by: Sagi Grimberg Reviewed-by: Christoph Hellwig --- drivers/nvme/host/rdma.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 881ac28575ef..ab545fb347a0 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -43,10 +43,6 @@ #define NVME_RDMA_MAX_INLINE_SEGMENTS 1 -#define NVME_RDMA_MAX_PAGES_PER_MR 512 - -#define NVME_RDMA_DEF_RECONNECT_DELAY 20 - /* * We handle AEN commands ourselves and don't even let the * block layer know about them. -- cgit v1.3-18-gd494 From 89f82cbb0d5c0ab768c8d02914188aa2211cd2e3 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 22 Aug 2016 15:15:23 -0400 Subject: drm/msm: fix use of copy_from_user() while holding spinlock Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Cc: stable@vger.kernel.org Reported-by: Vaishali Thakkar Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_submit.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 9766f9ae4b7d..408da409a216 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -64,6 +64,14 @@ void msm_gem_submit_free(struct msm_gem_submit *submit) kfree(submit); } +static inline unsigned long __must_check +copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + return __copy_from_user_inatomic(to, from, n); + return -EFAULT; +} + static int submit_lookup_objects(struct msm_gem_submit *submit, struct drm_msm_gem_submit *args, struct drm_file *file) { @@ -71,6 +79,7 @@ static int submit_lookup_objects(struct msm_gem_submit *submit, int ret = 0; spin_lock(&file->table_lock); + pagefault_disable(); for (i = 0; i < args->nr_bos; i++) { struct drm_msm_gem_submit_bo submit_bo; @@ -84,10 +93,15 @@ static int submit_lookup_objects(struct msm_gem_submit *submit, */ submit->bos[i].flags = 0; - ret = copy_from_user(&submit_bo, userptr, sizeof(submit_bo)); - if (ret) { - ret = -EFAULT; - goto out_unlock; + ret = copy_from_user_inatomic(&submit_bo, userptr, sizeof(submit_bo)); + if (unlikely(ret)) { + pagefault_enable(); + spin_unlock(&file->table_lock); + ret = copy_from_user(&submit_bo, userptr, sizeof(submit_bo)); + if (ret) + goto out; + spin_lock(&file->table_lock); + pagefault_disable(); } if (submit_bo.flags & ~MSM_SUBMIT_BO_FLAGS) { @@ -127,9 +141,12 @@ static int submit_lookup_objects(struct msm_gem_submit *submit, } out_unlock: - submit->nr_bos = i; + pagefault_enable(); spin_unlock(&file->table_lock); +out: + submit->nr_bos = i; + return ret; } -- cgit v1.3-18-gd494 From d78d383ab354b0b9e1d23404ae0d9fbdeb9aa035 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 22 Aug 2016 15:28:38 -0400 Subject: drm/msm: protect against faults from copy_from_user() in submit ioctl An evil userspace could try to cause deadlock by passing an unfaulted-in GEM bo as submit->bos (or submit->cmds) table. Which will trigger msm_gem_fault() while we already hold struct_mutex. See: https://github.com/freedreno/msmtest/blob/master/evilsubmittest.c Cc: stable@vger.kernel.org Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_drv.h | 6 ++++++ drivers/gpu/drm/msm/msm_gem.c | 9 +++++++++ drivers/gpu/drm/msm/msm_gem_submit.c | 3 +++ 3 files changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index b4bc7f1ef717..d0da52f2a806 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -157,6 +157,12 @@ struct msm_drm_private { struct shrinker shrinker; struct msm_vblank_ctrl vblank_ctrl; + + /* task holding struct_mutex.. currently only used in submit path + * to detect and reject faults from copy_from_user() for submit + * ioctl. + */ + struct task_struct *struct_mutex_task; }; struct msm_format { diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 6cd4af443139..85f3047e05ae 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -196,11 +196,20 @@ int msm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct drm_gem_object *obj = vma->vm_private_data; struct drm_device *dev = obj->dev; + struct msm_drm_private *priv = dev->dev_private; struct page **pages; unsigned long pfn; pgoff_t pgoff; int ret; + /* This should only happen if userspace tries to pass a mmap'd + * but unfaulted gem bo vaddr into submit ioctl, triggering + * a page fault while struct_mutex is already held. This is + * not a valid use-case so just bail. + */ + if (priv->struct_mutex_task == current) + return VM_FAULT_SIGBUS; + /* Make sure we don't parallel update on a fault, nor move or remove * something from beneath our feet */ diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 408da409a216..880d6a9af7c8 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -394,6 +394,8 @@ int msm_ioctl_gem_submit(struct drm_device *dev, void *data, if (ret) return ret; + priv->struct_mutex_task = current; + submit = submit_create(dev, gpu, args->nr_bos, args->nr_cmds); if (!submit) { ret = -ENOMEM; @@ -485,6 +487,7 @@ out: if (ret) msm_gem_submit_free(submit); out_unlock: + priv->struct_mutex_task = NULL; mutex_unlock(&dev->struct_mutex); return ret; } -- cgit v1.3-18-gd494 From add1fa75101263ab4d74240f93000998d4325624 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Sat, 27 Aug 2016 01:02:28 +0200 Subject: drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates. Due to assigning the 'replaced' value instead of or'ing it, if drm_atomic_crtc_set_property() gets called multiple times, the last call will define the color_mgmt_changed flag, so a non-updating call to a property can reset the flag and prevent actual hw state updates required by preceding property updates. Signed-off-by: Mario Kleiner Cc: Daniel Vetter Cc: # v4.6+ Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_atomic.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index fa3930757972..2a3ded44cf2a 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -475,7 +475,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, val, -1, &replaced); - state->color_mgmt_changed = replaced; + state->color_mgmt_changed |= replaced; return ret; } else if (property == config->ctm_property) { ret = drm_atomic_replace_property_blob_from_id(crtc, @@ -483,7 +483,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, val, sizeof(struct drm_color_ctm), &replaced); - state->color_mgmt_changed = replaced; + state->color_mgmt_changed |= replaced; return ret; } else if (property == config->gamma_lut_property) { ret = drm_atomic_replace_property_blob_from_id(crtc, @@ -491,7 +491,7 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, val, -1, &replaced); - state->color_mgmt_changed = replaced; + state->color_mgmt_changed |= replaced; return ret; } else if (crtc->funcs->atomic_set_property) return crtc->funcs->atomic_set_property(crtc, state, property, val); -- cgit v1.3-18-gd494 From fe4c988bdd1cc60402a4e3ca3976a686ea991b5a Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 29 Aug 2016 01:13:42 +0300 Subject: net/mlx5e: Limit UMR length to the device's limitation ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE is limited to U16_MAX, before this patch we ignored that limitation and requested the maximum possible UMR translation length that the netdev might need (MAX channels * MAX pages per channel). In case of a system with #cores > 32 and when linear WQE allocation fails, falling back to using UMR WQEs will cause the RQ (Receive Queue) to get stuck. Here we limit UMR length to min(U16_MAX, max required pages) (while considering the required alignments) on driver load, by default U16_MAX is sufficient since the default RX rings value guarantees that we are in range, dynamically (on set_ringparam/set_channels) we will check if the new required UMR length (num mtts) is still in range, if not, fail the request. Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE') Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 14 +++++++------- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 19 +++++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 11 ++++++++--- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 12 ++++++------ 4 files changed, 40 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 1b495efa7490..d63a1b8f9c13 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -73,8 +73,12 @@ #define MLX5_MPWRQ_PAGES_PER_WQE BIT(MLX5_MPWRQ_WQE_PAGE_ORDER) #define MLX5_MPWRQ_STRIDES_PER_PAGE (MLX5_MPWRQ_NUM_STRIDES >> \ MLX5_MPWRQ_WQE_PAGE_ORDER) -#define MLX5_CHANNEL_MAX_NUM_MTTS (ALIGN(MLX5_MPWRQ_PAGES_PER_WQE, 8) * \ - BIT(MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE_MPW)) + +#define MLX5_MTT_OCTW(npages) (ALIGN(npages, 8) / 2) +#define MLX5E_REQUIRED_MTTS(rqs, wqes)\ + (rqs * wqes * ALIGN(MLX5_MPWRQ_PAGES_PER_WQE, 8)) +#define MLX5E_VALID_NUM_MTTS(num_mtts) (MLX5_MTT_OCTW(num_mtts) <= U16_MAX) + #define MLX5_UMR_ALIGN (2048) #define MLX5_MPWRQ_SMALL_PACKET_THRESHOLD (128) @@ -304,6 +308,7 @@ struct mlx5e_rq { unsigned long state; int ix; + u32 mpwqe_mtt_offset; struct mlx5e_rx_am am; /* Adaptive Moderation */ @@ -814,11 +819,6 @@ static inline int mlx5e_get_max_num_channels(struct mlx5_core_dev *mdev) MLX5E_MAX_NUM_CHANNELS); } -static inline int mlx5e_get_mtt_octw(int npages) -{ - return ALIGN(npages, 8) / 2; -} - extern const struct ethtool_ops mlx5e_ethtool_ops; #ifdef CONFIG_MLX5_CORE_EN_DCB extern const struct dcbnl_rtnl_ops mlx5e_dcbnl_ops; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 4a3757e60441..9cfe4088d008 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -373,6 +373,7 @@ static int mlx5e_set_ringparam(struct net_device *dev, u16 min_rx_wqes; u8 log_rq_size; u8 log_sq_size; + u32 num_mtts; int err = 0; if (param->rx_jumbo_pending) { @@ -397,6 +398,15 @@ static int mlx5e_set_ringparam(struct net_device *dev, 1 << mlx5_max_log_rq_size(rq_wq_type)); return -EINVAL; } + + num_mtts = MLX5E_REQUIRED_MTTS(priv->params.num_channels, param->rx_pending); + if (priv->params.rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ && + !MLX5E_VALID_NUM_MTTS(num_mtts)) { + netdev_info(dev, "%s: rx_pending (%d) request can't be satisfied, try to reduce.\n", + __func__, param->rx_pending); + return -EINVAL; + } + if (param->tx_pending < (1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)) { netdev_info(dev, "%s: tx_pending (%d) < min (%d)\n", __func__, param->tx_pending, @@ -454,6 +464,7 @@ static int mlx5e_set_channels(struct net_device *dev, unsigned int count = ch->combined_count; bool arfs_enabled; bool was_opened; + u32 num_mtts; int err = 0; if (!count) { @@ -472,6 +483,14 @@ static int mlx5e_set_channels(struct net_device *dev, return -EINVAL; } + num_mtts = MLX5E_REQUIRED_MTTS(count, BIT(priv->params.log_rq_size)); + if (priv->params.rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ && + !MLX5E_VALID_NUM_MTTS(num_mtts)) { + netdev_info(dev, "%s: rx count (%d) request can't be satisfied, try to reduce.\n", + __func__, count); + return -EINVAL; + } + if (priv->params.num_channels == count) return 0; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 03d944c0077e..65360b1f6ee3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -340,6 +340,9 @@ static int mlx5e_create_rq(struct mlx5e_channel *c, rq->alloc_wqe = mlx5e_alloc_rx_mpwqe; rq->dealloc_wqe = mlx5e_dealloc_rx_mpwqe; + rq->mpwqe_mtt_offset = c->ix * + MLX5E_REQUIRED_MTTS(1, BIT(priv->params.log_rq_size)); + rq->mpwqe_stride_sz = BIT(priv->params.mpwqe_log_stride_sz); rq->mpwqe_num_strides = BIT(priv->params.mpwqe_log_num_strides); rq->wqe_sz = rq->mpwqe_stride_sz * rq->mpwqe_num_strides; @@ -3233,8 +3236,8 @@ static int mlx5e_create_umr_mkey(struct mlx5e_priv *priv) struct mlx5_create_mkey_mbox_in *in; struct mlx5_mkey_seg *mkc; int inlen = sizeof(*in); - u64 npages = - priv->profile->max_nch(mdev) * MLX5_CHANNEL_MAX_NUM_MTTS; + u64 npages = MLX5E_REQUIRED_MTTS(priv->profile->max_nch(mdev), + BIT(MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE_MPW)); int err; in = mlx5_vzalloc(inlen); @@ -3248,10 +3251,12 @@ static int mlx5e_create_umr_mkey(struct mlx5e_priv *priv) MLX5_PERM_LOCAL_WRITE | MLX5_ACCESS_MODE_MTT; + npages = min_t(u32, ALIGN(U16_MAX, 4) * 2, npages); + mkc->qpn_mkey7_0 = cpu_to_be32(0xffffff << 8); mkc->flags_pd = cpu_to_be32(mdev->mlx5e_res.pdn); mkc->len = cpu_to_be64(npages << PAGE_SHIFT); - mkc->xlt_oct_size = cpu_to_be32(mlx5e_get_mtt_octw(npages)); + mkc->xlt_oct_size = cpu_to_be32(MLX5_MTT_OCTW(npages)); mkc->log2_page_size = PAGE_SHIFT; err = mlx5_core_create_mkey(mdev, &priv->umr_mkey, in, inlen, NULL, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index 9f2a16a507e0..bdc9e33a06e4 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -324,9 +324,9 @@ mlx5e_copy_skb_header_fragmented_mpwqe(struct device *pdev, } } -static u16 mlx5e_get_wqe_mtt_offset(u16 rq_ix, u16 wqe_ix) +static u32 mlx5e_get_wqe_mtt_offset(struct mlx5e_rq *rq, u16 wqe_ix) { - return rq_ix * MLX5_CHANNEL_MAX_NUM_MTTS + + return rq->mpwqe_mtt_offset + wqe_ix * ALIGN(MLX5_MPWRQ_PAGES_PER_WQE, 8); } @@ -340,7 +340,7 @@ static void mlx5e_build_umr_wqe(struct mlx5e_rq *rq, struct mlx5_wqe_data_seg *dseg = &wqe->data; struct mlx5e_mpw_info *wi = &rq->wqe_info[ix]; u8 ds_cnt = DIV_ROUND_UP(sizeof(*wqe), MLX5_SEND_WQE_DS); - u16 umr_wqe_mtt_offset = mlx5e_get_wqe_mtt_offset(rq->ix, ix); + u32 umr_wqe_mtt_offset = mlx5e_get_wqe_mtt_offset(rq, ix); memset(wqe, 0, sizeof(*wqe)); cseg->opmod_idx_opcode = @@ -353,9 +353,9 @@ static void mlx5e_build_umr_wqe(struct mlx5e_rq *rq, ucseg->flags = MLX5_UMR_TRANSLATION_OFFSET_EN; ucseg->klm_octowords = - cpu_to_be16(mlx5e_get_mtt_octw(MLX5_MPWRQ_PAGES_PER_WQE)); + cpu_to_be16(MLX5_MTT_OCTW(MLX5_MPWRQ_PAGES_PER_WQE)); ucseg->bsf_octowords = - cpu_to_be16(mlx5e_get_mtt_octw(umr_wqe_mtt_offset)); + cpu_to_be16(MLX5_MTT_OCTW(umr_wqe_mtt_offset)); ucseg->mkey_mask = cpu_to_be64(MLX5_MKEY_MASK_FREE); dseg->lkey = sq->mkey_be; @@ -423,7 +423,7 @@ static int mlx5e_alloc_rx_fragmented_mpwqe(struct mlx5e_rq *rq, { struct mlx5e_mpw_info *wi = &rq->wqe_info[ix]; int mtt_sz = mlx5e_get_wqe_mtt_sz(); - u32 dma_offset = mlx5e_get_wqe_mtt_offset(rq->ix, ix) << PAGE_SHIFT; + u64 dma_offset = (u64)mlx5e_get_wqe_mtt_offset(rq, ix) << PAGE_SHIFT; int i; wi->umr.dma_info = kmalloc(sizeof(*wi->umr.dma_info) * -- cgit v1.3-18-gd494 From f2fde18c52a7367a8f6cf6855e2a7174e601c8ee Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 29 Aug 2016 01:13:43 +0300 Subject: net/mlx5e: Don't wait for RQ completions on close This will significantly reduce receive queue flush time on interface down. Instead of asking the firmware to flush the RQ (Receive Queue) via asynchronous completions when moved to error, we handle RQ flush manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed out. This will reduce RQs flush time and speedup interface down procedure (ifconfig down) from 6 sec to 0.3 sec on a 48 cores system. Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c free form non critical data path code for better code locality. Fixes: 6cd392a082de ('net/mlx5e: Handle RQ flush in error cases') Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 +-- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 37 +++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 23 ++------------ 3 files changed, 22 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index d63a1b8f9c13..26a7ec7073f2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -223,9 +223,8 @@ struct mlx5e_tstamp { }; enum { - MLX5E_RQ_STATE_POST_WQES_ENABLE, + MLX5E_RQ_STATE_FLUSH, MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, - MLX5E_RQ_STATE_FLUSH_TIMEOUT, MLX5E_RQ_STATE_AM, }; @@ -703,7 +702,6 @@ int mlx5e_napi_poll(struct napi_struct *napi, int budget); bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget); int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget); void mlx5e_free_tx_descs(struct mlx5e_sq *sq); -void mlx5e_free_rx_descs(struct mlx5e_rq *rq); void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 65360b1f6ee3..2463eba75125 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -431,7 +431,6 @@ static int mlx5e_enable_rq(struct mlx5e_rq *rq, struct mlx5e_rq_param *param) MLX5_SET(rqc, rqc, cqn, rq->cq.mcq.cqn); MLX5_SET(rqc, rqc, state, MLX5_RQC_STATE_RST); - MLX5_SET(rqc, rqc, flush_in_error_en, 1); MLX5_SET(rqc, rqc, vsd, priv->params.vlan_strip_disable); MLX5_SET(wq, wq, log_wq_pg_sz, rq->wq_ctrl.buf.page_shift - MLX5_ADAPTER_PAGE_SHIFT); @@ -528,6 +527,23 @@ static int mlx5e_wait_for_min_rx_wqes(struct mlx5e_rq *rq) return -ETIMEDOUT; } +static void mlx5e_free_rx_descs(struct mlx5e_rq *rq) +{ + struct mlx5_wq_ll *wq = &rq->wq; + struct mlx5e_rx_wqe *wqe; + __be16 wqe_ix_be; + u16 wqe_ix; + + while (!mlx5_wq_ll_is_empty(wq)) { + wqe_ix_be = *wq->tail_next; + wqe_ix = be16_to_cpu(wqe_ix_be); + wqe = mlx5_wq_ll_get_wqe(&rq->wq, wqe_ix); + rq->dealloc_wqe(rq, wqe_ix); + mlx5_wq_ll_pop(&rq->wq, wqe_ix_be, + &wqe->next.next_wqe_index); + } +} + static int mlx5e_open_rq(struct mlx5e_channel *c, struct mlx5e_rq_param *param, struct mlx5e_rq *rq) @@ -551,8 +567,6 @@ static int mlx5e_open_rq(struct mlx5e_channel *c, if (param->am_enabled) set_bit(MLX5E_RQ_STATE_AM, &c->rq.state); - set_bit(MLX5E_RQ_STATE_POST_WQES_ENABLE, &rq->state); - sq->ico_wqe_info[pi].opcode = MLX5_OPCODE_NOP; sq->ico_wqe_info[pi].num_wqebbs = 1; mlx5e_send_nop(sq, true); /* trigger mlx5e_post_rx_wqes() */ @@ -569,23 +583,8 @@ err_destroy_rq: static void mlx5e_close_rq(struct mlx5e_rq *rq) { - int tout = 0; - int err; - - clear_bit(MLX5E_RQ_STATE_POST_WQES_ENABLE, &rq->state); + set_bit(MLX5E_RQ_STATE_FLUSH, &rq->state); napi_synchronize(&rq->channel->napi); /* prevent mlx5e_post_rx_wqes */ - - err = mlx5e_modify_rq_state(rq, MLX5_RQC_STATE_RDY, MLX5_RQC_STATE_ERR); - while (!mlx5_wq_ll_is_empty(&rq->wq) && !err && - tout++ < MLX5_EN_QP_FLUSH_MAX_ITER) - msleep(MLX5_EN_QP_FLUSH_MSLEEP_QUANT); - - if (err || tout == MLX5_EN_QP_FLUSH_MAX_ITER) - set_bit(MLX5E_RQ_STATE_FLUSH_TIMEOUT, &rq->state); - - /* avoid destroying rq before mlx5e_poll_rx_cq() is done with it */ - napi_synchronize(&rq->channel->napi); - cancel_work_sync(&rq->am.work); mlx5e_disable_rq(rq); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index bdc9e33a06e4..fee1e47769a8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -595,26 +595,9 @@ void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix) wi->free_wqe(rq, wi); } -void mlx5e_free_rx_descs(struct mlx5e_rq *rq) -{ - struct mlx5_wq_ll *wq = &rq->wq; - struct mlx5e_rx_wqe *wqe; - __be16 wqe_ix_be; - u16 wqe_ix; - - while (!mlx5_wq_ll_is_empty(wq)) { - wqe_ix_be = *wq->tail_next; - wqe_ix = be16_to_cpu(wqe_ix_be); - wqe = mlx5_wq_ll_get_wqe(&rq->wq, wqe_ix); - rq->dealloc_wqe(rq, wqe_ix); - mlx5_wq_ll_pop(&rq->wq, wqe_ix_be, - &wqe->next.next_wqe_index); - } -} - #define RQ_CANNOT_POST(rq) \ - (!test_bit(MLX5E_RQ_STATE_POST_WQES_ENABLE, &rq->state) || \ - test_bit(MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, &rq->state)) + (test_bit(MLX5E_RQ_STATE_FLUSH, &rq->state) || \ + test_bit(MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, &rq->state)) bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq) { @@ -916,7 +899,7 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget) struct mlx5e_rq *rq = container_of(cq, struct mlx5e_rq, cq); int work_done = 0; - if (unlikely(test_bit(MLX5E_RQ_STATE_FLUSH_TIMEOUT, &rq->state))) + if (unlikely(test_bit(MLX5E_RQ_STATE_FLUSH, &rq->state))) return 0; if (cq->decmprs_left) -- cgit v1.3-18-gd494 From 8484f9ed13b26043be80ff5774506024956eae8f Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 29 Aug 2016 01:13:44 +0300 Subject: net/mlx5e: Don't post fragmented MPWQE when RQ is disabled ICO (Internal control operations) SQ (Send Queue) is closed/disabled after RQ (Receive Queue). After RQ is closed an ICO SQ completion might post a fragmented MPWQE (Multi Packet Work Queue Element) into that RQ. As on regular RQ post, check if we are allowed to post to that RQ (RQ is enabled). Cleanup in-progress UMR MPWQE on mlx5e_free_rx_descs if needed. Fixes: bc77b240b3c5 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE') Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 6 ++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 2463eba75125..e259eaa18f55 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -534,6 +534,10 @@ static void mlx5e_free_rx_descs(struct mlx5e_rq *rq) __be16 wqe_ix_be; u16 wqe_ix; + /* UMR WQE (if in progress) is always at wq->head */ + if (test_bit(MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, &rq->state)) + mlx5e_free_rx_fragmented_mpwqe(rq, &rq->wqe_info[wq->head]); + while (!mlx5_wq_ll_is_empty(wq)) { wqe_ix_be = *wq->tail_next; wqe_ix = be16_to_cpu(wqe_ix_be); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index fee1e47769a8..b6f8ebbdb487 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -506,6 +506,12 @@ void mlx5e_post_rx_fragmented_mpwqe(struct mlx5e_rq *rq) struct mlx5e_rx_wqe *wqe = mlx5_wq_ll_get_wqe(wq, wq->head); clear_bit(MLX5E_RQ_STATE_UMR_WQE_IN_PROGRESS, &rq->state); + + if (unlikely(test_bit(MLX5E_RQ_STATE_FLUSH, &rq->state))) { + mlx5e_free_rx_fragmented_mpwqe(rq, &rq->wqe_info[wq->head]); + return; + } + mlx5_wq_ll_push(wq, be16_to_cpu(wqe->next.next_wqe_index)); rq->stats.mpwqe_frag++; -- cgit v1.3-18-gd494 From 6e8dd6d6f4bd2fd6fefdbf2e73bf251e36db59af Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 29 Aug 2016 01:13:45 +0300 Subject: net/mlx5e: Don't wait for SQ completions on close Instead of asking the firmware to flush the SQ (Send Queue) via asynchronous completions when moved to error, we handle SQ flush manually (mlx5e_free_tx_descs) same as we did when SQ flush got timed out or on tx_timeout. This will reduce SQs flush time and speedup interface down procedure. Moved mlx5e_free_tx_descs to the end of en_tx.c for tx critical code locality. Fixes: 29429f3300a3 ('net/mlx5e: Timeout if SQ doesn't flush during close') Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 3 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 38 ++----------- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 67 +++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 6 +- 4 files changed, 44 insertions(+), 70 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 26a7ec7073f2..bf722aa88cf0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -369,9 +369,8 @@ struct mlx5e_sq_dma { }; enum { - MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, + MLX5E_SQ_STATE_FLUSH, MLX5E_SQ_STATE_BF_ENABLE, - MLX5E_SQ_STATE_TX_TIMEOUT, }; struct mlx5e_ico_wqe_info { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index e259eaa18f55..297781af53c7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -39,13 +39,6 @@ #include "eswitch.h" #include "vxlan.h" -enum { - MLX5_EN_QP_FLUSH_TIMEOUT_MS = 5000, - MLX5_EN_QP_FLUSH_MSLEEP_QUANT = 20, - MLX5_EN_QP_FLUSH_MAX_ITER = MLX5_EN_QP_FLUSH_TIMEOUT_MS / - MLX5_EN_QP_FLUSH_MSLEEP_QUANT, -}; - struct mlx5e_rq_param { u32 rqc[MLX5_ST_SZ_DW(rqc)]; struct mlx5_wq_param wq; @@ -827,7 +820,6 @@ static int mlx5e_open_sq(struct mlx5e_channel *c, goto err_disable_sq; if (sq->txq) { - set_bit(MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, &sq->state); netdev_tx_reset_queue(sq->txq); netif_tx_start_queue(sq->txq); } @@ -851,38 +843,20 @@ static inline void netif_tx_disable_queue(struct netdev_queue *txq) static void mlx5e_close_sq(struct mlx5e_sq *sq) { - int tout = 0; - int err; + set_bit(MLX5E_SQ_STATE_FLUSH, &sq->state); + /* prevent netif_tx_wake_queue */ + napi_synchronize(&sq->channel->napi); if (sq->txq) { - clear_bit(MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, &sq->state); - /* prevent netif_tx_wake_queue */ - napi_synchronize(&sq->channel->napi); netif_tx_disable_queue(sq->txq); - /* ensure hw is notified of all pending wqes */ + /* last doorbell out, godspeed .. */ if (mlx5e_sq_has_room_for(sq, 1)) mlx5e_send_nop(sq, true); - - err = mlx5e_modify_sq(sq, MLX5_SQC_STATE_RDY, - MLX5_SQC_STATE_ERR, false, 0); - if (err) - set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); } - /* wait till sq is empty, unless a TX timeout occurred on this SQ */ - while (sq->cc != sq->pc && - !test_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state)) { - msleep(MLX5_EN_QP_FLUSH_MSLEEP_QUANT); - if (tout++ > MLX5_EN_QP_FLUSH_MAX_ITER) - set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); - } - - /* avoid destroying sq before mlx5e_poll_tx_cq() is done with it */ - napi_synchronize(&sq->channel->napi); - - mlx5e_free_tx_descs(sq); mlx5e_disable_sq(sq); + mlx5e_free_tx_descs(sq); mlx5e_destroy_sq(sq); } @@ -2802,7 +2776,7 @@ static void mlx5e_tx_timeout(struct net_device *dev) if (!netif_xmit_stopped(netdev_get_tx_queue(dev, i))) continue; sched_work = true; - set_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state); + set_bit(MLX5E_SQ_STATE_FLUSH, &sq->state); netdev_err(dev, "TX timeout on queue: %d, SQ: 0x%x, CQ: 0x%x, SQ Cons: 0x%x SQ Prod: 0x%x\n", i, sq->sqn, sq->cq.mcq.cqn, sq->cc, sq->pc); } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index e073bf59890d..5f209ade17bf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -394,35 +394,6 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev) return mlx5e_sq_xmit(sq, skb); } -void mlx5e_free_tx_descs(struct mlx5e_sq *sq) -{ - struct mlx5e_tx_wqe_info *wi; - struct sk_buff *skb; - u16 ci; - int i; - - while (sq->cc != sq->pc) { - ci = sq->cc & sq->wq.sz_m1; - skb = sq->skb[ci]; - wi = &sq->wqe_info[ci]; - - if (!skb) { /* nop */ - sq->cc++; - continue; - } - - for (i = 0; i < wi->num_dma; i++) { - struct mlx5e_sq_dma *dma = - mlx5e_dma_get(sq, sq->dma_fifo_cc++); - - mlx5e_tx_dma_unmap(sq->pdev, dma); - } - - dev_kfree_skb_any(skb); - sq->cc += wi->num_wqebbs; - } -} - bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) { struct mlx5e_sq *sq; @@ -434,7 +405,7 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) sq = container_of(cq, struct mlx5e_sq, cq); - if (unlikely(test_bit(MLX5E_SQ_STATE_TX_TIMEOUT, &sq->state))) + if (unlikely(test_bit(MLX5E_SQ_STATE_FLUSH, &sq->state))) return false; npkts = 0; @@ -512,11 +483,39 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget) netdev_tx_completed_queue(sq->txq, npkts, nbytes); if (netif_tx_queue_stopped(sq->txq) && - mlx5e_sq_has_room_for(sq, MLX5E_SQ_STOP_ROOM) && - likely(test_bit(MLX5E_SQ_STATE_WAKE_TXQ_ENABLE, &sq->state))) { - netif_tx_wake_queue(sq->txq); - sq->stats.wake++; + mlx5e_sq_has_room_for(sq, MLX5E_SQ_STOP_ROOM)) { + netif_tx_wake_queue(sq->txq); + sq->stats.wake++; } return (i == MLX5E_TX_CQ_POLL_BUDGET); } + +void mlx5e_free_tx_descs(struct mlx5e_sq *sq) +{ + struct mlx5e_tx_wqe_info *wi; + struct sk_buff *skb; + u16 ci; + int i; + + while (sq->cc != sq->pc) { + ci = sq->cc & sq->wq.sz_m1; + skb = sq->skb[ci]; + wi = &sq->wqe_info[ci]; + + if (!skb) { /* nop */ + sq->cc++; + continue; + } + + for (i = 0; i < wi->num_dma; i++) { + struct mlx5e_sq_dma *dma = + mlx5e_dma_get(sq, sq->dma_fifo_cc++); + + mlx5e_tx_dma_unmap(sq->pdev, dma); + } + + dev_kfree_skb_any(skb); + sq->cc += wi->num_wqebbs; + } +} diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c index 64ae2e800daa..9bf33bb69210 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c @@ -51,16 +51,18 @@ struct mlx5_cqe64 *mlx5e_get_cqe(struct mlx5e_cq *cq) static void mlx5e_poll_ico_cq(struct mlx5e_cq *cq) { + struct mlx5e_sq *sq = container_of(cq, struct mlx5e_sq, cq); struct mlx5_wq_cyc *wq; struct mlx5_cqe64 *cqe; - struct mlx5e_sq *sq; u16 sqcc; + if (unlikely(test_bit(MLX5E_SQ_STATE_FLUSH, &sq->state))) + return; + cqe = mlx5e_get_cqe(cq); if (likely(!cqe)) return; - sq = container_of(cq, struct mlx5e_sq, cq); wq = &sq->wq; /* sq->cc must be updated only after mlx5_cqwq_update_db_record(), -- cgit v1.3-18-gd494 From cc8e9ebf952699cb6870f1366a4920d05b036e31 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 29 Aug 2016 01:13:46 +0300 Subject: net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ The driver RQ has two possible configurations: striding RQ and non-striding RQ. Until this patch, the driver always reported the number of hardware WQEs (ring descriptors). For non striding RQ configuration, this was OK since we have one WQE per pending packet For striding RQ, multiple packets can fit into one WQE. For better user experience we normalize the rx_pending parameter (size of wqe/mtu) as the average ring size in case of striding RQ. Fixes: 461017cb006a ('net/mlx5e: Support RX multi-packet WQE ...') Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 76 +++++++++++++++++++--- 1 file changed, 67 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 9cfe4088d008..d0cf8fa22659 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -352,15 +352,61 @@ static void mlx5e_get_ethtool_stats(struct net_device *dev, sq_stats_desc, j); } +static u32 mlx5e_rx_wqes_to_packets(struct mlx5e_priv *priv, int rq_wq_type, + int num_wqe) +{ + int packets_per_wqe; + int stride_size; + int num_strides; + int wqe_size; + + if (rq_wq_type != MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ) + return num_wqe; + + stride_size = 1 << priv->params.mpwqe_log_stride_sz; + num_strides = 1 << priv->params.mpwqe_log_num_strides; + wqe_size = stride_size * num_strides; + + packets_per_wqe = wqe_size / + ALIGN(ETH_DATA_LEN, stride_size); + return (1 << (order_base_2(num_wqe * packets_per_wqe) - 1)); +} + +static u32 mlx5e_packets_to_rx_wqes(struct mlx5e_priv *priv, int rq_wq_type, + int num_packets) +{ + int packets_per_wqe; + int stride_size; + int num_strides; + int wqe_size; + int num_wqes; + + if (rq_wq_type != MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ) + return num_packets; + + stride_size = 1 << priv->params.mpwqe_log_stride_sz; + num_strides = 1 << priv->params.mpwqe_log_num_strides; + wqe_size = stride_size * num_strides; + + num_packets = (1 << order_base_2(num_packets)); + + packets_per_wqe = wqe_size / + ALIGN(ETH_DATA_LEN, stride_size); + num_wqes = DIV_ROUND_UP(num_packets, packets_per_wqe); + return 1 << (order_base_2(num_wqes)); +} + static void mlx5e_get_ringparam(struct net_device *dev, struct ethtool_ringparam *param) { struct mlx5e_priv *priv = netdev_priv(dev); int rq_wq_type = priv->params.rq_wq_type; - param->rx_max_pending = 1 << mlx5_max_log_rq_size(rq_wq_type); + param->rx_max_pending = mlx5e_rx_wqes_to_packets(priv, rq_wq_type, + 1 << mlx5_max_log_rq_size(rq_wq_type)); param->tx_max_pending = 1 << MLX5E_PARAMS_MAXIMUM_LOG_SQ_SIZE; - param->rx_pending = 1 << priv->params.log_rq_size; + param->rx_pending = mlx5e_rx_wqes_to_packets(priv, rq_wq_type, + 1 << priv->params.log_rq_size); param->tx_pending = 1 << priv->params.log_sq_size; } @@ -370,6 +416,9 @@ static int mlx5e_set_ringparam(struct net_device *dev, struct mlx5e_priv *priv = netdev_priv(dev); bool was_opened; int rq_wq_type = priv->params.rq_wq_type; + u32 rx_pending_wqes; + u32 min_rq_size; + u32 max_rq_size; u16 min_rx_wqes; u8 log_rq_size; u8 log_sq_size; @@ -386,20 +435,29 @@ static int mlx5e_set_ringparam(struct net_device *dev, __func__); return -EINVAL; } - if (param->rx_pending < (1 << mlx5_min_log_rq_size(rq_wq_type))) { + + min_rq_size = mlx5e_rx_wqes_to_packets(priv, rq_wq_type, + 1 << mlx5_min_log_rq_size(rq_wq_type)); + max_rq_size = mlx5e_rx_wqes_to_packets(priv, rq_wq_type, + 1 << mlx5_max_log_rq_size(rq_wq_type)); + rx_pending_wqes = mlx5e_packets_to_rx_wqes(priv, rq_wq_type, + param->rx_pending); + + if (param->rx_pending < min_rq_size) { netdev_info(dev, "%s: rx_pending (%d) < min (%d)\n", __func__, param->rx_pending, - 1 << mlx5_min_log_rq_size(rq_wq_type)); + min_rq_size); return -EINVAL; } - if (param->rx_pending > (1 << mlx5_max_log_rq_size(rq_wq_type))) { + if (param->rx_pending > max_rq_size) { netdev_info(dev, "%s: rx_pending (%d) > max (%d)\n", __func__, param->rx_pending, - 1 << mlx5_max_log_rq_size(rq_wq_type)); + max_rq_size); return -EINVAL; } - num_mtts = MLX5E_REQUIRED_MTTS(priv->params.num_channels, param->rx_pending); + num_mtts = MLX5E_REQUIRED_MTTS(priv->params.num_channels, + rx_pending_wqes); if (priv->params.rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ && !MLX5E_VALID_NUM_MTTS(num_mtts)) { netdev_info(dev, "%s: rx_pending (%d) request can't be satisfied, try to reduce.\n", @@ -420,9 +478,9 @@ static int mlx5e_set_ringparam(struct net_device *dev, return -EINVAL; } - log_rq_size = order_base_2(param->rx_pending); + log_rq_size = order_base_2(rx_pending_wqes); log_sq_size = order_base_2(param->tx_pending); - min_rx_wqes = mlx5_min_rx_wqes(rq_wq_type, param->rx_pending); + min_rx_wqes = mlx5_min_rx_wqes(rq_wq_type, rx_pending_wqes); if (log_rq_size == priv->params.log_rq_size && log_sq_size == priv->params.log_sq_size && -- cgit v1.3-18-gd494 From c8cf78fe100b0d152a1932327c24cefc0ba4bdbe Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 29 Aug 2016 01:13:47 +0300 Subject: net/mlx5e: Add ethtool counter for TX xmit_more Add a counter in ethtool for the number of times that TX xmit_more was used. Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_stats.h | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 1 + 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 297781af53c7..2459c7f3db8d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -155,6 +155,7 @@ static void mlx5e_update_sw_counters(struct mlx5e_priv *priv) s->tx_queue_stopped += sq_stats->stopped; s->tx_queue_wake += sq_stats->wake; s->tx_queue_dropped += sq_stats->dropped; + s->tx_xmit_more += sq_stats->xmit_more; s->tx_csum_partial_inner += sq_stats->csum_partial_inner; tx_offload_none += sq_stats->csum_none; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h index 7b9d8a989b52..499487ce3b53 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h @@ -70,6 +70,7 @@ struct mlx5e_sw_stats { u64 tx_queue_stopped; u64 tx_queue_wake; u64 tx_queue_dropped; + u64 tx_xmit_more; u64 rx_wqe_err; u64 rx_mpwqe_filler; u64 rx_mpwqe_frag; @@ -101,6 +102,7 @@ static const struct counter_desc sw_stats_desc[] = { { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_stopped) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_wake) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_queue_dropped) }, + { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, tx_xmit_more) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_wqe_err) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_mpwqe_filler) }, { MLX5E_DECLARE_STAT(struct mlx5e_sw_stats, rx_mpwqe_frag) }, @@ -298,6 +300,7 @@ struct mlx5e_sq_stats { /* commonly accessed in data path */ u64 packets; u64 bytes; + u64 xmit_more; u64 tso_packets; u64 tso_bytes; u64 tso_inner_packets; @@ -324,6 +327,7 @@ static const struct counter_desc sq_stats_desc[] = { { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, stopped) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, wake) }, { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, dropped) }, + { MLX5E_DECLARE_TX_STAT(struct mlx5e_sq_stats, xmit_more) }, }; #define NUM_SW_COUNTERS ARRAY_SIZE(sw_stats_desc) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 5f209ade17bf..988eca99ee0f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -375,6 +375,7 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.packets++; sq->stats.bytes += num_bytes; + sq->stats.xmit_more += skb->xmit_more; return NETDEV_TX_OK; dma_unmap_wqe_err: -- cgit v1.3-18-gd494 From bf50082c15eb2bc47d1922e70f424c57f36646d5 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Mon, 29 Aug 2016 01:13:48 +0300 Subject: net/mlx5e: Fix memory leak if refreshing TIRs fails Free 'in' command object also when mlx5_core_modify_tir fails. Fixes: 724b2aa15126 ("net/mlx5e: TIRs management refactoring") Signed-off-by: Kamal Heib Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_common.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c index 673043ccd76c..9cce153e1035 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c @@ -139,7 +139,7 @@ int mlx5e_refresh_tirs_self_loopback_enable(struct mlx5_core_dev *mdev) struct mlx5e_tir *tir; void *in; int inlen; - int err; + int err = 0; inlen = MLX5_ST_SZ_BYTES(modify_tir_in); in = mlx5_vzalloc(inlen); @@ -151,10 +151,11 @@ int mlx5e_refresh_tirs_self_loopback_enable(struct mlx5_core_dev *mdev) list_for_each_entry(tir, &mdev->mlx5e_res.td.tirs_list, list) { err = mlx5_core_modify_tir(mdev, tir->tirn, in, inlen); if (err) - return err; + goto out; } +out: kvfree(in); - return 0; + return err; } -- cgit v1.3-18-gd494 From 1722b9694ecfbc602865017c3fa6da0e3ec234d8 Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Mon, 29 Aug 2016 01:13:49 +0300 Subject: net/mlx5: Add error prints when validate ETS failed Upon set ETS failure due to user invalid input, add error prints to specify the exact error to the user. Fixes: cdcf11212b22 ('net/mlx5e: Validate BW weight values of ETS') Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index caa9a3ccc3f3..762af16ed021 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -127,29 +127,40 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets) return mlx5_set_port_tc_bw_alloc(mdev, tc_tx_bw); } -static int mlx5e_dbcnl_validate_ets(struct ieee_ets *ets) +static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, + struct ieee_ets *ets) { int bw_sum = 0; int i; /* Validate Priority */ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { - if (ets->prio_tc[i] >= MLX5E_MAX_PRIORITY) + if (ets->prio_tc[i] >= MLX5E_MAX_PRIORITY) { + netdev_err(netdev, + "Failed to validate ETS: priority value greater than max(%d)\n", + MLX5E_MAX_PRIORITY); return -EINVAL; + } } /* Validate Bandwidth Sum */ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { if (ets->tc_tsa[i] == IEEE_8021QAZ_TSA_ETS) { - if (!ets->tc_tx_bw[i]) + if (!ets->tc_tx_bw[i]) { + netdev_err(netdev, + "Failed to validate ETS: BW 0 is illegal\n"); return -EINVAL; + } bw_sum += ets->tc_tx_bw[i]; } } - if (bw_sum != 0 && bw_sum != 100) + if (bw_sum != 0 && bw_sum != 100) { + netdev_err(netdev, + "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; + } return 0; } @@ -159,7 +170,7 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev, struct mlx5e_priv *priv = netdev_priv(netdev); int err; - err = mlx5e_dbcnl_validate_ets(ets); + err = mlx5e_dbcnl_validate_ets(netdev, ets); if (err) return err; -- cgit v1.3-18-gd494 From e5835f2833b12808c53aa621d1d3aa085706b5b3 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Mon, 29 Aug 2016 01:13:50 +0300 Subject: net/mlx5: Increase number of ethtool steering priorities Ethtool has 11 flow tables, each flow table has its own priority. Increase the number of priorities to be aligned with the number of flow tables. Fixes: 1174fce8d141 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 75bb8c864557..3d6c1f65e586 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -80,7 +80,7 @@ LEFTOVERS_NUM_PRIOS) #define ETHTOOL_PRIO_NUM_LEVELS 1 -#define ETHTOOL_NUM_PRIOS 10 +#define ETHTOOL_NUM_PRIOS 11 #define ETHTOOL_MIN_LEVEL (KERNEL_MIN_LEVEL + ETHTOOL_NUM_PRIOS) /* Vlan, mac, ttc, aRFS */ #define KERNEL_NIC_PRIO_NUM_LEVELS 4 -- cgit v1.3-18-gd494 From 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Aug 2016 17:33:03 +0100 Subject: net: smc91x: fix SMC accesses Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King Tested-by: Robert Jarzmik Signed-off-by: David S. Miller --- arch/arm/mach-pxa/idp.c | 3 +- arch/arm/mach-pxa/xcep.c | 3 +- arch/arm/mach-realview/core.c | 3 +- arch/arm/mach-sa1100/pleb.c | 2 +- arch/blackfin/mach-bf561/boards/cm_bf561.c | 3 +- arch/blackfin/mach-bf561/boards/ezkit.c | 3 +- drivers/net/ethernet/smsc/smc91x.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.h | 65 +++++++++++++++++++++--------- include/linux/smc91x.h | 10 +++++ 9 files changed, 73 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index c410d84b243d..66070acaa888 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_USE_DMA | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 3f06cd90567a..056369ef250e 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata xcep_smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT | SMC91X_USE_DMA, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index baf174542e36..a0ead0ae23d6 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -93,7 +93,8 @@ static struct smsc911x_platform_config smsc911x_config = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, }; static struct platform_device realview_eth_device = { diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 1525d7b5f1b7..88149f85bc49 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c6db52ba3a06..10c57771822d 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -146,7 +146,8 @@ static struct platform_device hitachi_fb_device = { #include static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, .leda = RPC_LED_100_10, .ledb = RPC_LED_TX_RX, }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index f35525b55819..57d1c43726d9 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -134,7 +134,8 @@ static struct platform_device net2272_bfin_device = { #include static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT, .leda = RPC_LED_100_10, .ledb = RPC_LED_TX_RX, }; diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 726b80f45906..503a3b6dce91 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2275,6 +2275,13 @@ static int smc_drv_probe(struct platform_device *pdev) if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); + + if (!SMC_8BIT(lp) && !SMC_16BIT(lp)) { + dev_err(&pdev->dev, + "at least one of 8-bit or 16-bit access support is required.\n"); + ret = -ENXIO; + goto out_free_netdev; + } } #if IS_BUILTIN(CONFIG_OF) diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 1a55c7976df0..e17671c9d1b0 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -36,6 +36,27 @@ #include #include +/* + * Any 16-bit access is performed with two 8-bit accesses if the hardware + * can't do it directly. Most registers are 16-bit so those are mandatory. + */ +#define SMC_outw_b(x, a, r) \ + do { \ + unsigned int __val16 = (x); \ + unsigned int __reg = (r); \ + SMC_outb(__val16, a, __reg); \ + SMC_outb(__val16 >> 8, a, __reg + (1 << SMC_IO_SHIFT)); \ + } while (0) + +#define SMC_inw_b(a, r) \ + ({ \ + unsigned int __val16; \ + unsigned int __reg = r; \ + __val16 = SMC_inb(a, __reg); \ + __val16 |= SMC_inb(a, __reg + (1 << SMC_IO_SHIFT)) << 8; \ + __val16; \ + }) + /* * Define your architecture specific bus configuration parameters here. */ @@ -55,10 +76,30 @@ #define SMC_IO_SHIFT (lp->io_shift) #define SMC_inb(a, r) readb((a) + (r)) -#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inw(a, r) \ + ({ \ + unsigned int __smc_r = r; \ + SMC_16BIT(lp) ? readw((a) + __smc_r) : \ + SMC_8BIT(lp) ? SMC_inw_b(a, __smc_r) : \ + ({ BUG(); 0; }); \ + }) + #define SMC_inl(a, r) readl((a) + (r)) #define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) \ + do { \ + unsigned int __v = v, __smc_r = r; \ + if (SMC_16BIT(lp)) \ + __SMC_outw(__v, a, __smc_r); \ + else if (SMC_8BIT(lp)) \ + SMC_outw_b(__v, a, __smc_r); \ + else \ + BUG(); \ + } while (0) + #define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insb(a, r, p, l) readsb((a) + (r), p, l) +#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, l) #define SMC_insw(a, r, p, l) readsw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l) #define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) @@ -66,7 +107,7 @@ #define SMC_IRQ_FLAGS (-1) /* from resource */ /* We actually can't write halfwords properly if not word aligned */ -static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg) +static inline void __SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if ((machine_is_mainstone() || machine_is_stargate2() || machine_is_pxa_idp()) && reg & 2) { @@ -416,24 +457,8 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, #if ! SMC_CAN_USE_16BIT -/* - * Any 16-bit access is performed with two 8-bit accesses if the hardware - * can't do it directly. Most registers are 16-bit so those are mandatory. - */ -#define SMC_outw(x, ioaddr, reg) \ - do { \ - unsigned int __val16 = (x); \ - SMC_outb( __val16, ioaddr, reg ); \ - SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\ - } while (0) -#define SMC_inw(ioaddr, reg) \ - ({ \ - unsigned int __val16; \ - __val16 = SMC_inb( ioaddr, reg ); \ - __val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \ - __val16; \ - }) - +#define SMC_outw(x, ioaddr, reg) SMC_outw_b(x, ioaddr, reg) +#define SMC_inw(ioaddr, reg) SMC_inw_b(ioaddr, reg) #define SMC_insw(a, r, p, l) BUG() #define SMC_outsw(a, r, p, l) BUG() diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 76199b75d584..e302c447e057 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -1,6 +1,16 @@ #ifndef __SMC91X_H__ #define __SMC91X_H__ +/* + * These bits define which access sizes a platform can support, rather + * than the maximal access size. So, if your platform can do 16-bit + * and 32-bit accesses to the SMC91x device, but not 8-bit, set both + * SMC91X_USE_16BIT and SMC91X_USE_32BIT. + * + * The SMC91x driver requires at least one of SMC91X_USE_8BIT or + * SMC91X_USE_16BIT to be supported - just setting SMC91X_USE_32BIT is + * an invalid configuration. + */ #define SMC91X_USE_8BIT (1 << 0) #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) -- cgit v1.3-18-gd494 From b99b43bb4bdf1d361f7487cf03d803082bbf9101 Mon Sep 17 00:00:00 2001 From: Owen Lin Date: Fri, 26 Aug 2016 13:49:09 +0800 Subject: Add Killer E2500 device ID in alx driver. Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/alx/main.c | 2 ++ drivers/net/ethernet/atheros/alx/reg.h | 1 + 2 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index 6453148d066a..4eb17daefc4f 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1545,6 +1545,8 @@ static const struct pci_device_id alx_pci_tbl[] = { .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_E2400), .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_E2500), + .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8162), .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8171) }, diff --git a/drivers/net/ethernet/atheros/alx/reg.h b/drivers/net/ethernet/atheros/alx/reg.h index 0959e6824cb6..1fc2d852249f 100644 --- a/drivers/net/ethernet/atheros/alx/reg.h +++ b/drivers/net/ethernet/atheros/alx/reg.h @@ -38,6 +38,7 @@ #define ALX_DEV_ID_AR8161 0x1091 #define ALX_DEV_ID_E2200 0xe091 #define ALX_DEV_ID_E2400 0xe0a1 +#define ALX_DEV_ID_E2500 0xe0b1 #define ALX_DEV_ID_AR8162 0x1090 #define ALX_DEV_ID_AR8171 0x10A1 #define ALX_DEV_ID_AR8172 0x10A0 -- cgit v1.3-18-gd494 From f48d1496b8537d75776478c6942dd87f34d7f270 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 15 Aug 2016 18:25:17 -0400 Subject: platform/olpc: Make ec explicitly non-modular The Kconfig entry controlling compilation of this code is: arch/x86/Kconfig:config OLPC arch/x86/Kconfig: bool "One Laptop Per Child support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Paul Gortmaker Acked-by: Andres Salomon Signed-off-by: Darren Hart --- drivers/platform/olpc/olpc-ec.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c index f99b183d5296..374a8028fec7 100644 --- a/drivers/platform/olpc/olpc-ec.c +++ b/drivers/platform/olpc/olpc-ec.c @@ -1,6 +1,8 @@ /* * Generic driver for the OLPC Embedded Controller. * + * Author: Andres Salomon + * * Copyright (C) 2011-2012 One Laptop per Child Foundation. * * Licensed under the GPL v2 or later. @@ -12,7 +14,7 @@ #include #include #include -#include +#include #include #include #include @@ -326,8 +328,4 @@ static int __init olpc_ec_init_module(void) { return platform_driver_register(&olpc_ec_plat_driver); } - arch_initcall(olpc_ec_init_module); - -MODULE_AUTHOR("Andres Salomon "); -MODULE_LICENSE("GPL"); -- cgit v1.3-18-gd494 From da43bf0c21e57fff0221da5de0a9a388ec0d27cd Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 15 Aug 2016 18:24:59 -0400 Subject: intel_pmic_gpio: Make explicitly non-modular The Kconfig entry controlling compilation of this code is: drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: Alek Du Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: Darren Hart --- drivers/platform/x86/intel_pmic_gpio.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c index 63b371d6ee55..91ae58510d92 100644 --- a/drivers/platform/x86/intel_pmic_gpio.c +++ b/drivers/platform/x86/intel_pmic_gpio.c @@ -1,6 +1,8 @@ /* Moorestown PMIC GPIO (access through IPC) driver * Copyright (c) 2008 - 2009, Intel Corporation. * + * Author: Alek Du + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -21,7 +23,6 @@ #define pr_fmt(fmt) "%s: " fmt, __func__ -#include #include #include #include @@ -322,9 +323,4 @@ static int __init platform_pmic_gpio_init(void) { return platform_driver_register(&platform_pmic_gpio_driver); } - subsys_initcall(platform_pmic_gpio_init); - -MODULE_AUTHOR("Alek Du "); -MODULE_DESCRIPTION("Intel Moorestown PMIC GPIO driver"); -MODULE_LICENSE("GPL v2"); -- cgit v1.3-18-gd494 From 6654674cb7b5953ac04fc9d7f5f511676ae97e29 Mon Sep 17 00:00:00 2001 From: Jorik Jonker Date: Sat, 27 Aug 2016 21:04:33 +0200 Subject: clk: sunxi-ng: Fix wrong reset register offsets The reset register offsets for UART*, I2C* and SCR were off by a few bytes. Signed-off-by: Jorik Jonker Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c index 9af359544110..267f99523fbe 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c @@ -783,14 +783,14 @@ static struct ccu_reset_map sun8i_h3_ccu_resets[] = { [RST_BUS_I2S1] = { 0x2d0, BIT(13) }, [RST_BUS_I2S2] = { 0x2d0, BIT(14) }, - [RST_BUS_I2C0] = { 0x2d4, BIT(0) }, - [RST_BUS_I2C1] = { 0x2d4, BIT(1) }, - [RST_BUS_I2C2] = { 0x2d4, BIT(2) }, - [RST_BUS_UART0] = { 0x2d4, BIT(16) }, - [RST_BUS_UART1] = { 0x2d4, BIT(17) }, - [RST_BUS_UART2] = { 0x2d4, BIT(18) }, - [RST_BUS_UART3] = { 0x2d4, BIT(19) }, - [RST_BUS_SCR] = { 0x2d4, BIT(20) }, + [RST_BUS_I2C0] = { 0x2d8, BIT(0) }, + [RST_BUS_I2C1] = { 0x2d8, BIT(1) }, + [RST_BUS_I2C2] = { 0x2d8, BIT(2) }, + [RST_BUS_UART0] = { 0x2d8, BIT(16) }, + [RST_BUS_UART1] = { 0x2d8, BIT(17) }, + [RST_BUS_UART2] = { 0x2d8, BIT(18) }, + [RST_BUS_UART3] = { 0x2d8, BIT(19) }, + [RST_BUS_SCR] = { 0x2d8, BIT(20) }, }; static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = { -- cgit v1.3-18-gd494 From 98744b408c757901df57fa50cbd5826245dc3a1f Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 29 Aug 2016 08:44:03 +0200 Subject: clocksource/drivers/atmel-pit: Fix compilation error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous fix introduced a check against the ret variable which is not defined, hence producing a compilation error: linux/drivers/clocksource/timer-atmel-pit.c: In function ‘at91sam926x_pit_dt_init’: linux/drivers/clocksource/timer-atmel-pit.c:264:2: error: ‘ret’ undeclared (first use in this function) ret = clk_prepare_enable(data->mck); ^ linux/drivers/clocksource/timer-atmel-pit.c:264:2: note: each undeclared identifier is reported only once for each function it appears in Add the missing the variable 'ret'. Fixes: 504f34c9e45c "clocksource/drivers/atmel-pit: Convert init function to return error" Signed-off-by: Daniel Lezcano Cc: alexandre.belloni@free-electrons.com Cc: motobud@gmail.com Cc: realbright@lgcns.com Link: http://lkml.kernel.org/r/1472453043-24287-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner --- drivers/clocksource/timer-atmel-pit.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index 3494bc5a21d5..7f0f5b26d8c5 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -240,6 +240,7 @@ static int __init at91sam926x_pit_common_init(struct pit_data *data) static int __init at91sam926x_pit_dt_init(struct device_node *node) { struct pit_data *data; + int ret; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) -- cgit v1.3-18-gd494 From 8a07fed44b126f48020f122b9e6bf05d8c48f281 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 23 Aug 2016 10:25:58 +0100 Subject: drm/i915/dvo: Remove dangling call to drm_encoder_cleanup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we hit the error path, we have never called drm_encoder_init() and so have nothing to cleanup. Doing so hits a null dereference: [ 10.066261] BUG: unable to handle kernel NULL pointer dereference at 00000104 [ 10.066273] IP: [] mutex_lock+0xa/0x15 [ 10.066287] *pde = 00000000 [ 10.066295] Oops: 0002 [#1] [ 10.066302] Modules linked in: i915(+) video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm iTCO_wdt iTCO_vendor_support ppdev evdev snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm snd_timer snd pcspkr uhci_hcd ehci_pci soundcore sr_mod ehci_hcd serio_raw i2c_i801 usbcore i2c_smbus cdrom lpc_ich mfd_core rng_core e100 mii floppy parport_pc parport acpi_cpufreq button processor usb_common eeprom lm85 hwmon_vid autofs4 [ 10.066378] CPU: 0 PID: 132 Comm: systemd-udevd Not tainted 4.8.0-rc3-00013-gef0e1ea #34 [ 10.066389] Hardware name: MicroLink /D865GLC , BIOS BF86510A.86A.0077.P25.0508040031 08/04/2005 [ 10.066401] task: f62db800 task.stack: f5970000 [ 10.066409] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 10.066417] EIP is at mutex_lock+0xa/0x15 [ 10.066424] EAX: 00000104 EBX: 00000104 ECX: 00000000 EDX: 80000000 [ 10.066432] ESI: 00000000 EDI: 00000104 EBP: f5be8000 ESP: f5971b58 [ 10.066439] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 10.066446] CR0: 80050033 CR2: 00000104 CR3: 35945000 CR4: 000006d0 [ 10.066453] Stack: [ 10.066459] f503d740 f824dddf 00000000 f61170c0 f61170c0 f82371ae f850f40e 00000001 [ 10.066476] f61170c0 f5971bcc f5be8000 f9c2d401 00000001 f8236fcc 00000001 00000000 [ 10.066491] f5144014 f5be8104 00000008 f9c5267c 00000007 f61170c0 f5144400 f9c4ff00 [ 10.066507] Call Trace: [ 10.066526] [] ? drm_modeset_lock_all+0x27/0xb3 [drm] [ 10.066545] [] ? drm_encoder_cleanup+0x1a/0x132 [drm] [ 10.066559] [] ? drm_atomic_helper_connector_reset+0x3f/0x5c [drm_kms_helper] [ 10.066644] [] ? intel_dvo_init+0x569/0x788 [i915] [ 10.066663] [] ? drm_encoder_init+0x43/0x20b [drm] [ 10.066734] [] ? intel_modeset_init+0x1436/0x17dd [i915] [ 10.066791] [] ? i915_driver_load+0x85a/0x15d3 [i915] [ 10.066846] [] ? i915_driver_open+0x5/0x5 [i915] [ 10.066857] [] ? firmware_map_add_entry.part.2+0xc/0xc [ 10.066868] [] ? pci_device_probe+0x8e/0x11c [ 10.066878] [] ? driver_probe_device+0x1db/0x62e [ 10.066888] [] ? kernfs_new_node+0x29/0x9c [ 10.066897] [] ? pci_match_device+0xd9/0x161 [ 10.066905] [] ? kernfs_create_dir_ns+0x42/0x88 [ 10.066914] [] ? __driver_attach+0xe6/0x11b [ 10.066924] [] ? kobject_add_internal+0x1bb/0x44f [ 10.066933] [] ? driver_probe_device+0x62e/0x62e [ 10.066941] [] ? bus_for_each_dev+0x46/0x7f [ 10.066950] [] ? driver_attach+0x1a/0x34 [ 10.066958] [] ? driver_probe_device+0x62e/0x62e [ 10.066966] [] ? bus_add_driver+0x217/0x32a [ 10.066975] [] ? 0xf8403000 [ 10.066982] [] ? driver_register+0x5f/0x108 [ 10.066991] [] ? do_one_initcall+0x49/0x1f6 [ 10.067000] [] ? pick_next_task_fair+0x14b/0x2a3 [ 10.067008] [] ? __schedule+0x15c/0x4fe [ 10.067016] [] ? preempt_schedule_common+0x19/0x3c [ 10.067027] [] ? do_init_module+0x17/0x230 [ 10.067035] [] ? _cond_resched+0x12/0x1a [ 10.067044] [] ? kmem_cache_alloc+0x8f/0x11f [ 10.067052] [] ? do_init_module+0x17/0x230 [ 10.067060] [] ? kfree+0x137/0x203 [ 10.067068] [] ? do_init_module+0x76/0x230 [ 10.067078] [] ? load_module+0x2a39/0x333f [ 10.067087] [] ? SyS_finit_module+0x96/0xd5 [ 10.067096] [] ? vm_mmap_pgoff+0x79/0xa0 [ 10.067105] [] ? do_fast_syscall_32+0xb5/0x1b0 [ 10.067114] [] ? sysenter_past_esp+0x47/0x75 [ 10.067121] Code: c8 f7 76 c1 e8 8e cc d2 ff e9 45 fe ff ff 66 90 66 90 66 90 66 90 90 ff 00 7f 05 e8 4e 0c 00 00 c3 53 89 c3 e8 75 ec ff ff 89 d8 08 79 05 e8 fa 0a 00 00 5b c3 53 89 c3 85 c0 74 1b 8b 03 83 [ 10.067180] EIP: [] mutex_lock+0xa/0x15 SS:ESP 0068:f5971b58 [ 10.067190] CR2: 0000000000000104 [ 10.067222] ---[ end trace 049f1f09da45a856 ]--- Reported-by: Meelis Roos Fixes: 580d8ed522e0 ("drm/i915: Give encoders useful names") Reviewed-by: David Weinehall Signed-off-by: Chris Wilson Cc: Ville Syrjälä Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20160823092558.14931-1-chris@chris-wilson.co.uk (cherry picked from commit 8f76aa0ebe0b7787afe768d9df80031e832d2520) --- drivers/gpu/drm/i915/intel_dvo.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 47bdf9dad0d3..b9e5a63a7c9e 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -554,7 +554,6 @@ void intel_dvo_init(struct drm_device *dev) return; } - drm_encoder_cleanup(&intel_encoder->base); kfree(intel_dvo); kfree(intel_connector); } -- cgit v1.3-18-gd494 From 3c3292634fc2de1ab97b6aa3222fee647f737adb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 29 Aug 2016 13:18:23 +0200 Subject: hwmon: (it87) Add missing sysfs attribute group terminator Attribute array it87_attributes_in lacks its NULL terminator, causing random behavior when operating on the attribute group. Fixes: 52929715634a ("hwmon: (it87) Use is_visible for voltage sensors") Signed-off-by: Jean Delvare Cc: Martin Blumenstingl Cc: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/it87.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index d0203a115eff..4667012b46b7 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -2015,6 +2015,7 @@ static struct attribute *it87_attributes_in[] = { &sensor_dev_attr_in10_input.dev_attr.attr, /* 41 */ &sensor_dev_attr_in11_input.dev_attr.attr, /* 41 */ &sensor_dev_attr_in12_input.dev_attr.attr, /* 41 */ + NULL }; static const struct attribute_group it87_group_in = { -- cgit v1.3-18-gd494 From e0c6fba45ab730afc22fa01ac1c42459893252ec Mon Sep 17 00:00:00 2001 From: Rob Rice Date: Mon, 1 Aug 2016 13:03:41 -0400 Subject: mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX to avoid link error on some platforms. Reported-by: Fengguang Wu Signed-off-by: Rob Rice Acked-by: Geert Uytterhoeven Signed-off-by: Jassi Brar --- drivers/mailbox/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 97c372908e78..7817d40d81e7 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -127,6 +127,7 @@ config XGENE_SLIMPRO_MBOX config BCM_PDC_MBOX tristate "Broadcom PDC Mailbox" depends on ARM64 || COMPILE_TEST + depends on HAS_DMA default ARCH_BCM_IPROC help Mailbox implementation for the Broadcom PDC ring manager, -- cgit v1.3-18-gd494 From 068cf29eca4ef25556496635b978143b170b862c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 4 Aug 2016 08:30:31 +0300 Subject: mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown() We can't pass NULL pointers to pdc_ring_free() so I moved the check for NULL. Signed-off-by: Dan Carpenter Signed-off-by: Jassi Brar --- drivers/mailbox/bcm-pdc-mailbox.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mailbox/bcm-pdc-mailbox.c b/drivers/mailbox/bcm-pdc-mailbox.c index cbe0c1ee4ba9..c56d4d0b2307 100644 --- a/drivers/mailbox/bcm-pdc-mailbox.c +++ b/drivers/mailbox/bcm-pdc-mailbox.c @@ -1191,10 +1191,11 @@ static void pdc_shutdown(struct mbox_chan *chan) { struct pdc_state *pdcs = chan->con_priv; - if (pdcs) - dev_dbg(&pdcs->pdev->dev, - "Shutdown mailbox channel for PDC %u", pdcs->pdc_idx); + if (!pdcs) + return; + dev_dbg(&pdcs->pdev->dev, + "Shutdown mailbox channel for PDC %u", pdcs->pdc_idx); pdc_ring_free(pdcs); } -- cgit v1.3-18-gd494 From a75e4a85f49e7f5d71cf0e425bc009c15ad3b5c4 Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Sun, 28 Aug 2016 01:15:24 +0800 Subject: fix:mailbox:bcm-pdc-mailbox:mark symbols static where possible We get 2 warnings when biuld kernel with W=1: drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes] drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie Acked-by: Arnd Bergmann Signed-off-by: Jassi Brar --- drivers/mailbox/bcm-pdc-mailbox.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mailbox/bcm-pdc-mailbox.c b/drivers/mailbox/bcm-pdc-mailbox.c index c56d4d0b2307..c19dd820ea9b 100644 --- a/drivers/mailbox/bcm-pdc-mailbox.c +++ b/drivers/mailbox/bcm-pdc-mailbox.c @@ -469,7 +469,7 @@ static const struct file_operations pdc_debugfs_stats = { * this directory for a SPU. * @pdcs: PDC state structure */ -void pdc_setup_debugfs(struct pdc_state *pdcs) +static void pdc_setup_debugfs(struct pdc_state *pdcs) { char spu_stats_name[16]; @@ -485,7 +485,7 @@ void pdc_setup_debugfs(struct pdc_state *pdcs) &pdc_debugfs_stats); } -void pdc_free_debugfs(void) +static void pdc_free_debugfs(void) { if (debugfs_dir && simple_empty(debugfs_dir)) { debugfs_remove_recursive(debugfs_dir); -- cgit v1.3-18-gd494 From c6c1f9bc798bee7cfc2e172cd2c9b48187d801a7 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 15 Aug 2016 16:41:13 +0800 Subject: drm/imx: Add active plane reconfiguration support We don't support configuring active plane on-the-fly for imx-drm. The relevant CRTC should be disabled before the plane configuration. Of course, the plane itself should be disabled as well. This patch adds active plane reconfiguration support by forcing CRTC mode change and disabling-enabling plane in plane's ->atomic_update callback. Suggested-by: Daniel Vetter Cc: Philipp Zabel Cc: David Airlie Cc: Russell King Cc: Daniel Vetter Cc: Peter Senna Tschudin Signed-off-by: Liu Ying Tested-by: Peter Senna Tschudin Tested-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 26 +++++++++++++++++++++++++- drivers/gpu/drm/imx/ipuv3-plane.c | 21 ++++++++++++++------- 2 files changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 9f7dafce3a4c..7bf90e9e6139 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -171,10 +171,34 @@ static void imx_drm_output_poll_changed(struct drm_device *drm) drm_fbdev_cma_hotplug_event(imxdrm->fbhelper); } +static int imx_drm_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + /* + * Check modeset again in case crtc_state->mode_changed is + * updated in plane's ->atomic_check callback. + */ + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + return ret; +} + static const struct drm_mode_config_funcs imx_drm_mode_config_funcs = { .fb_create = drm_fb_cma_create, .output_poll_changed = imx_drm_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = imx_drm_atomic_check, .atomic_commit = drm_atomic_helper_commit, }; diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 4ad67d015ec7..29423e757d36 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -319,13 +319,14 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, return -EINVAL; /* - * since we cannot touch active IDMAC channels, we do not support - * resizing the enabled plane or changing its format + * We support resizing active plane or changing its format by + * forcing CRTC mode change and disabling-enabling plane in plane's + * ->atomic_update callback. */ if (old_fb && (state->src_w != old_state->src_w || state->src_h != old_state->src_h || fb->pixel_format != old_fb->pixel_format)) - return -EINVAL; + crtc_state->mode_changed = true; eba = drm_plane_state_to_eba(state); @@ -336,7 +337,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, return -EINVAL; if (old_fb && fb->pitches[0] != old_fb->pitches[0]) - return -EINVAL; + crtc_state->mode_changed = true; switch (fb->pixel_format) { case DRM_FORMAT_YUV420: @@ -372,7 +373,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, return -EINVAL; if (old_fb && old_fb->pitches[1] != fb->pitches[1]) - return -EINVAL; + crtc_state->mode_changed = true; } return 0; @@ -392,8 +393,14 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, enum ipu_color_space ics; if (old_state->fb) { - ipu_plane_atomic_set_base(ipu_plane, old_state); - return; + struct drm_crtc_state *crtc_state = state->crtc->state; + + if (!crtc_state->mode_changed) { + ipu_plane_atomic_set_base(ipu_plane, old_state); + return; + } + + ipu_disable_plane(plane); } switch (ipu_plane->dp_flow) { -- cgit v1.3-18-gd494 From 360647959323ec066cc55d82133df73e30530824 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 11 Jul 2016 09:25:45 +0300 Subject: iwlwifi: mvm: consider P2p device type for firmware dump triggers When the user really wanted a dump on P2P Client, he coudln't get it because we checked vif->type but didn't take vif->p2p into account. Fix that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h index f7dff7612c9c..e9f1be9da7d4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.h @@ -105,7 +105,8 @@ iwl_fw_dbg_trigger_vif_match(struct iwl_fw_dbg_trigger_tlv *trig, { u32 trig_vif = le32_to_cpu(trig->vif_type); - return trig_vif == IWL_FW_DBG_CONF_VIF_ANY || vif->type == trig_vif; + return trig_vif == IWL_FW_DBG_CONF_VIF_ANY || + ieee80211_vif_type_p2p(vif) == trig_vif; } static inline bool -- cgit v1.3-18-gd494 From bdc98b13716eafc454457e068d6c8aaffaaa71e4 Mon Sep 17 00:00:00 2001 From: Sharon Dvir Date: Mon, 25 Jul 2016 16:11:05 +0300 Subject: iwlwifi: mvm: check if vif is NULL before using it wdev_to_ieee80211_vif() might return NULL. Check that vif != NULL before dereferencing it. Signed-off-by: Sharon Dvir Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index b4fc86d5d7ef..6a615bb73042 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -467,6 +467,8 @@ struct iwl_mvm_vif { static inline struct iwl_mvm_vif * iwl_mvm_vif_from_mac80211(struct ieee80211_vif *vif) { + if (!vif) + return NULL; return (void *)vif->drv_priv; } -- cgit v1.3-18-gd494 From ff6e58e648ed5f3cc43891767811d5c3c88bbd41 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 3 Aug 2016 22:06:43 +0300 Subject: iwlwifi: mvm: don't use ret when not initialised fw-dbg code return ret but that variable was either 0 or not initialised. Return 0 always. Signed-off-by: Emmanuel Grumbach Fixes: 6a95126763fb ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index 1abcabb9b6cd..46b52bf705fb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -960,5 +960,6 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) } mvm->fw_dbg_conf = conf_id; - return ret; + + return 0; } -- cgit v1.3-18-gd494 From a904a08b5fee5317ff0f7b8212aa5d0776795a52 Mon Sep 17 00:00:00 2001 From: "Peer, Ilan" Date: Wed, 10 Aug 2016 13:48:35 +0300 Subject: iwlwifi: mvm: Advertise support for AP channel width change The iwlmvm driver supports channel width change in AP mode. Add the proper flag. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 6d6064534d59..5dd77e336617 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -624,6 +624,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->wiphy->features |= NL80211_FEATURE_P2P_GO_CTWIN | NL80211_FEATURE_LOW_PRIORITY_SCAN | NL80211_FEATURE_P2P_GO_OPPPS | + NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE | NL80211_FEATURE_DYNAMIC_SMPS | NL80211_FEATURE_STATIC_SMPS | NL80211_FEATURE_SUPPORTS_WMM_ADMISSION; -- cgit v1.3-18-gd494 From a474478642d57641ea06645104a15acc0420f01a Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 29 Aug 2016 17:51:24 +0200 Subject: drm/imx: fix crtc vblank state regression The atomic conversion lost the notification to let the DRM core know about the current state of the CRTC vblank interrupts. This regressed the ability of the core to reject page flip attempts on currently disabled CRTCs. Add back the notifications. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-crtc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 08e188bc10fc..462056e4b9e4 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -76,6 +76,8 @@ static void ipu_crtc_disable(struct drm_crtc *crtc) crtc->state->event = NULL; } spin_unlock_irq(&crtc->dev->event_lock); + + drm_crtc_vblank_off(crtc); } static void imx_drm_crtc_reset(struct drm_crtc *crtc) @@ -175,6 +177,8 @@ static int ipu_crtc_atomic_check(struct drm_crtc *crtc, static void ipu_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state) { + drm_crtc_vblank_on(crtc); + spin_lock_irq(&crtc->dev->event_lock); if (crtc->state->event) { WARN_ON(drm_crtc_vblank_get(crtc)); -- cgit v1.3-18-gd494 From 2c5575401e34de3d2fc90af1c95bc73435784093 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 26 Aug 2016 16:28:39 -0500 Subject: usb: musb: Fix locking errors for host only mode If we have USB gadgets disabled and USB_MUSB_HOST set, we get errors "possible irq lock inverssion dependency detected" errors during boot. Let's fix the issue by adding start_musb flag and start the controller after we're out of the spinlock protected section. Reported-by: Ladislav Michl Tested-by: Ladislav Michl Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_virthub.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 192248f974ec..fe08e776fec3 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -290,6 +290,7 @@ int musb_hub_control( u32 temp; int retval = 0; unsigned long flags; + bool start_musb = false; spin_lock_irqsave(&musb->lock, flags); @@ -390,7 +391,7 @@ int musb_hub_control( * logic relating to VBUS power-up. */ if (!hcd->self.is_b_host && musb_has_gadget(musb)) - musb_start(musb); + start_musb = true; break; case USB_PORT_FEAT_RESET: musb_port_reset(musb, true); @@ -451,5 +452,9 @@ error: retval = -EPIPE; } spin_unlock_irqrestore(&musb->lock, flags); + + if (start_musb) + musb_start(musb); + return retval; } -- cgit v1.3-18-gd494 From 8c57cac1457f3125a5d13dc03635c0708c61bff0 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 20 Jul 2016 10:24:02 +0300 Subject: mei: me: disable driver on SPT SPS firmware Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Cc: #4.6+ Tested-by: Sujith Pandel Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me.c | 10 ++++++++-- drivers/misc/mei/pci-me.c | 4 ++-- 2 files changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index e2fb44cc5c37..dc3a854e02d3 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -1263,8 +1263,14 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev) static bool mei_me_fw_type_sps(struct pci_dev *pdev) { u32 reg; - /* Read ME FW Status check for SPS Firmware */ - pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); + unsigned int devfn; + + /* + * Read ME FW Status register to check for SPS Firmware + * The SPS FW is only signaled in pci function 0 + */ + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, ®); trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); /* if bits [19:16] = 15, running SPS Firmware */ return (reg & 0xf0000) == 0xf0000; diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 64e64da6da44..71cea9b296b2 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -85,8 +85,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_cfg)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_sps_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_sps_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)}, -- cgit v1.3-18-gd494 From 9ebae9e4bcd7dff22536af8a969d8f66e6f23900 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 30 Aug 2016 16:47:02 +0100 Subject: pata_ninja32: Avoid corrupting status flags Ninja32 needs to set some flags to indicate it does 32bit IO. However it currently assigns this which loses the initializing flag and causes a warning spew. Fix it to use a logical or as is intended. Signed-off-by: Alan Cox Tested-by: Ellmar Stelnberger Signed-off-by: Tejun Heo --- drivers/ata/pata_ninja32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 633aa2934a18..44f97ad3c88d 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -144,7 +144,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = base + 0x1E; ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); - ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; ninja32_program(base); /* FIXME: Should we disable them at remove ? */ -- cgit v1.3-18-gd494 From a5d60783df61fbb67b7596b8a0f6b4b2e05251d5 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 30 Aug 2016 16:11:53 -0400 Subject: dm log writes: move IO accounting earlier to fix error path Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to fix a bug that the target hangs if bio_alloc() fails. The error path does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before invoking the error path to avoid underflow of lc->io_blocks. Signed-off-by: Mikulas Patocka Reviewed-by: Josef Bacik Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-log-writes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c index 4ab68033f9d1..4cc78aef9007 100644 --- a/drivers/md/dm-log-writes.c +++ b/drivers/md/dm-log-writes.c @@ -259,12 +259,12 @@ static int log_one_block(struct log_writes_c *lc, goto out; sector++; + atomic_inc(&lc->io_blocks); bio = bio_alloc(GFP_KERNEL, block->vec_cnt); if (!bio) { DMERR("Couldn't alloc log bio"); goto error; } - atomic_inc(&lc->io_blocks); bio->bi_iter.bi_size = 0; bio->bi_iter.bi_sector = sector; bio->bi_bdev = lc->logdev->bdev; -- cgit v1.3-18-gd494 From 7efb367320f56fc4d549875b6f3a6940018ef2e5 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 30 Aug 2016 16:20:55 -0400 Subject: dm log writes: fix bug with too large bios bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by: Mikulas Patocka Reviewed-by: Josef Bacik Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # v4.1+ --- drivers/md/dm-log-writes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c index 4cc78aef9007..ba24f4f37efc 100644 --- a/drivers/md/dm-log-writes.c +++ b/drivers/md/dm-log-writes.c @@ -260,7 +260,7 @@ static int log_one_block(struct log_writes_c *lc, sector++; atomic_inc(&lc->io_blocks); - bio = bio_alloc(GFP_KERNEL, block->vec_cnt); + bio = bio_alloc(GFP_KERNEL, min(block->vec_cnt, BIO_MAX_PAGES)); if (!bio) { DMERR("Couldn't alloc log bio"); goto error; @@ -282,7 +282,7 @@ static int log_one_block(struct log_writes_c *lc, if (ret != block->vecs[i].bv_len) { atomic_inc(&lc->io_blocks); submit_bio(bio); - bio = bio_alloc(GFP_KERNEL, block->vec_cnt - i); + bio = bio_alloc(GFP_KERNEL, min(block->vec_cnt - i, BIO_MAX_PAGES)); if (!bio) { DMERR("Couldn't alloc log bio"); goto error; -- cgit v1.3-18-gd494 From 313a61d30761217ce4383018de1cc0d5d503a376 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 30 Aug 2016 13:57:38 -0700 Subject: drm/vc4: Allow some more signals to be packed with uniform resets. The intent was to make sure people don't sneak in a small immediate or something to change the interpretation of the uniform update args, but these signals are just fine. Fixes a validation failure in the current X server on some Render operation. Signed-off-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_validate_shaders.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_validate_shaders.c b/drivers/gpu/drm/vc4/vc4_validate_shaders.c index 46527e989ce3..2543cf5b8b51 100644 --- a/drivers/gpu/drm/vc4/vc4_validate_shaders.c +++ b/drivers/gpu/drm/vc4/vc4_validate_shaders.c @@ -309,8 +309,14 @@ validate_uniform_address_write(struct vc4_validated_shader_info *validated_shade * of uniforms on each side. However, this scheme is easy to * validate so it's all we allow for now. */ - - if (QPU_GET_FIELD(inst, QPU_SIG) != QPU_SIG_NONE) { + switch (QPU_GET_FIELD(inst, QPU_SIG)) { + case QPU_SIG_NONE: + case QPU_SIG_SCOREBOARD_UNLOCK: + case QPU_SIG_COLOR_LOAD: + case QPU_SIG_LOAD_TMU0: + case QPU_SIG_LOAD_TMU1: + break; + default: DRM_ERROR("uniforms address change must be " "normal math\n"); return false; -- cgit v1.3-18-gd494 From 91e630d9ae6de6f740ef7c8176736eb55366833e Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 10 Mar 2016 01:22:19 +0200 Subject: dm log writes: fix check of kthread_run() return value The kthread_run() function returns either a valid task_struct or ERR_PTR() value, check for NULL is invalid. This change fixes potential for oops, e.g. in OOM situation. Signed-off-by: Vladimir Zapolskiy Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-log-writes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-writes.c b/drivers/md/dm-log-writes.c index ba24f4f37efc..49e4d8d4558f 100644 --- a/drivers/md/dm-log-writes.c +++ b/drivers/md/dm-log-writes.c @@ -459,9 +459,9 @@ static int log_writes_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad; } - ret = -EINVAL; lc->log_kthread = kthread_run(log_writes_kthread, lc, "log-write"); - if (!lc->log_kthread) { + if (IS_ERR(lc->log_kthread)) { + ret = PTR_ERR(lc->log_kthread); ti->error = "Couldn't alloc kthread"; dm_put_device(ti, lc->dev); dm_put_device(ti, lc->logdev); -- cgit v1.3-18-gd494 From 4e870e948fbabf62b78e8410f04c67703e7c816b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 30 Aug 2016 16:38:42 -0400 Subject: dm crypt: fix error with too large bios When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org # v3.16+ --- drivers/md/dm-crypt.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index eedba67b0e3e..d609566c19b0 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1924,6 +1924,13 @@ static int crypt_map(struct dm_target *ti, struct bio *bio) return DM_MAPIO_REMAPPED; } + /* + * Check if bio is too large, split as needed. + */ + if (unlikely(bio->bi_iter.bi_size > (BIO_MAX_PAGES << PAGE_SHIFT)) && + bio_data_dir(bio) == WRITE) + dm_accept_partial_bio(bio, ((BIO_MAX_PAGES << PAGE_SHIFT) >> SECTOR_SHIFT)); + io = dm_per_bio_data(bio, cc->per_bio_data_size); crypt_io_init(io, cc, bio, dm_target_offset(ti, bio->bi_iter.bi_sector)); io->ctx.req = (struct skcipher_request *)(io + 1); -- cgit v1.3-18-gd494 From 5d0be84ec0cacfc7a6d6ea548afdd07d481324cd Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 30 Aug 2016 09:51:44 -0700 Subject: dm crypt: fix free of bad values after tfm allocation failure If crypt_alloc_tfms() had to allocate multiple tfms and it failed before the last allocation, then it would call crypt_free_tfms() and could free pointers from uninitialized memory -- due to the crypt_free_tfms() check for non-zero cc->tfms[i]. Fix by allocating zeroed memory. Signed-off-by: Eric Biggers Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org --- drivers/md/dm-crypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index d609566c19b0..874295757caa 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -1453,7 +1453,7 @@ static int crypt_alloc_tfms(struct crypt_config *cc, char *ciphermode) unsigned i; int err; - cc->tfms = kmalloc(cc->tfms_count * sizeof(struct crypto_skcipher *), + cc->tfms = kzalloc(cc->tfms_count * sizeof(struct crypto_skcipher *), GFP_KERNEL); if (!cc->tfms) return -ENOMEM; -- cgit v1.3-18-gd494 From edd1ea2a8a2549e4fe58e817d539445729491ecf Mon Sep 17 00:00:00 2001 From: Bhaktipriya Shridhar Date: Tue, 30 Aug 2016 22:19:11 +0530 Subject: dm bufio: remove use of deprecated create_singlethread_workqueue() The workqueue "dm_bufio_wq" queues a single work item &dm_bufio_work so it doesn't require execution ordering. Hence, alloc_workqueue() has been used to replace the deprecated create_singlethread_workqueue(). The WQ_MEM_RECLAIM flag has been set since DM requires forward progress under memory pressure. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar Signed-off-by: Mike Snitzer --- drivers/md/dm-bufio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c index 6571c81465e1..8625040bae92 100644 --- a/drivers/md/dm-bufio.c +++ b/drivers/md/dm-bufio.c @@ -1879,7 +1879,7 @@ static int __init dm_bufio_init(void) __cache_size_refresh(); mutex_unlock(&dm_bufio_clients_lock); - dm_bufio_wq = create_singlethread_workqueue("dm_bufio_cache"); + dm_bufio_wq = alloc_workqueue("dm_bufio_cache", WQ_MEM_RECLAIM, 0); if (!dm_bufio_wq) return -ENOMEM; -- cgit v1.3-18-gd494 From bd37e022e334757a5dc1dae41baa29e16befe4ec Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 21 Aug 2016 15:41:44 +0000 Subject: cpufreq: dt: Add terminate entry for of_device_id tables Make sure of_device_id tables are NULL terminated. Signed-off-by: Wei Yongjun Acked-by: Viresh Kumar Fixes: f56aad1d98f1 (cpufreq: dt: Add generic platform-device creation support) CC: 4.7+ # 4.7+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt-platdev.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index 0bb44d5b5df4..2ee40fd360ca 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -74,6 +74,8 @@ static const struct of_device_id machines[] __initconst = { { .compatible = "ti,omap5", }, { .compatible = "xlnx,zynq-7000", }, + + { } }; static int __init cpufreq_dt_platdev_init(void) -- cgit v1.3-18-gd494 From d44c950e9398e639e124014e5872480a37b67259 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 26 Apr 2016 13:38:55 -0700 Subject: PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle This commit applies another _rcuidle suffix to fix an RCU use from idle. > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1122 Not tainted > ------------------------------- > include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [] __pm_runtime_resume+0x3c/0x64 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [] (unwind_backtrace) from [] (show_stack+0x10/0x14) > [] (show_stack) from [] (dump_stack+0xb0/0xe4) > [] (dump_stack) from [] (rpm_resume+0x5cc/0x7f4) > [] (rpm_resume) from [] (__pm_runtime_resume+0x4c/0x64) > [] (__pm_runtime_resume) from [] (omap2_gpio_resume_after_idle+0x54/0x68) > [] (omap2_gpio_resume_after_idle) from [] (omap3_enter_idle_bm+0xfc/0x1ec) > [] (omap3_enter_idle_bm) from [] (cpuidle_enter_state+0x80/0x3d4) > [] (cpuidle_enter_state) from [] (cpu_startup_entry+0x198/0x3a0) > [] (cpu_startup_entry) from [] (start_kernel+0x354/0x3c8) > [] (start_kernel) from [<8000807c>] (0x8000807c) Reported-by: Tony Lindgren Signed-off-by: Paul E. McKenney Tested-by: Tony Lindgren Tested-by: Guenter Roeck Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index e097d355cc04..76127e109ed2 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -601,7 +601,7 @@ static int rpm_resume(struct device *dev, int rpmflags) struct device *parent = NULL; int retval = 0; - trace_rpm_resume(dev, rpmflags); + trace_rpm_resume_rcuidle(dev, rpmflags); repeat: if (dev->power.runtime_error) @@ -764,7 +764,7 @@ static int rpm_resume(struct device *dev, int rpmflags) spin_lock_irq(&dev->power.lock); } - trace_rpm_return_int(dev, _THIS_IP_, retval); + trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval); return retval; } -- cgit v1.3-18-gd494 From d7737ce964d944dd07e25b0f569edcd550ede18c Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 26 Apr 2016 13:03:51 -0700 Subject: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle This commit appends a few _rcuidle suffixes to fix the following RCU-used-from-idle bug: > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1116 Not tainted > ------------------------------- > include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [] __rpm_callback+0x58/0x60 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [] (unwind_backtrace) from [] (show_stack+0x10/0x14) > [] (show_stack) from [] (dump_stack+0xb0/0xe4) > [] (dump_stack) from [] (rpm_suspend+0x580/0x768) > [] (rpm_suspend) from [] (__pm_runtime_suspend+0x64/0x84) > [] (__pm_runtime_suspend) from [] (omap2_gpio_prepare_for_idle+0x5c/0x70) > [] (omap2_gpio_prepare_for_idle) from [] (omap_sram_idle+0x140/0x244) > [] (omap_sram_idle) from [] (omap3_enter_idle_bm+0xfc/0x1ec) > [] (omap3_enter_idle_bm) from [] (cpuidle_enter_state+0x80/0x3d4) > [] (cpuidle_enter_state) from [] (cpu_startup_entry+0x198/0x3a0) > [] (cpu_startup_entry) from [] (start_kernel+0x354/0x3c8) > [] (start_kernel) from [<8000807c>] (0x8000807c) In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!" Reported-by: Tony Lindgren Signed-off-by: Paul E. McKenney Tested-by: Tony Lindgren Tested-by: Guenter Roeck WhACKED-by: Steven Rostedt Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 76127e109ed2..17995fadebd7 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -301,7 +301,7 @@ static int rpm_idle(struct device *dev, int rpmflags) int (*callback)(struct device *); int retval; - trace_rpm_idle(dev, rpmflags); + trace_rpm_idle_rcuidle(dev, rpmflags); retval = rpm_check_suspend_allowed(dev); if (retval < 0) ; /* Conditions are wrong. */ @@ -337,7 +337,7 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.request_pending = true; queue_work(pm_wq, &dev->power.work); } - trace_rpm_return_int(dev, _THIS_IP_, 0); + trace_rpm_return_int_rcuidle(dev, _THIS_IP_, 0); return 0; } @@ -352,7 +352,7 @@ static int rpm_idle(struct device *dev, int rpmflags) wake_up_all(&dev->power.wait_queue); out: - trace_rpm_return_int(dev, _THIS_IP_, retval); + trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval); return retval ? retval : rpm_suspend(dev, rpmflags | RPM_AUTO); } -- cgit v1.3-18-gd494 From 279cf3f23870f7eb8ca071115e06d3d5ca0a2b9e Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Fri, 26 Aug 2016 01:00:54 +0200 Subject: drm/nouveau/acpi: use DSM if bridge does not support D3cold Even if PR3 support is available on the bridge, it will not be used if the PCI layer considers it unavailable (i.e. on all laptops from 2013 and 2014). Ensure that this condition is checked to allow a fallback to the Optimus DSM for device poweroff. Initially I wanted to call pci_d3cold_enable before checking bridge_d3 (in case the user changed d3cold_allowed), but that is such an unlikely case and likely fragile anyway. The current patch is suggested by Mika in http://www.spinics.net/lists/linux-pci/msg52599.html Cc: Mika Westerberg Signed-off-by: Peter Wu Reviewed-by: Mika Westerberg Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index f2ad17aa33f0..dc57b628e074 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -225,6 +225,17 @@ static bool nouveau_pr3_present(struct pci_dev *pdev) if (!parent_pdev) return false; + if (!parent_pdev->bridge_d3) { + /* + * Parent PCI bridge is currently not power managed. + * Since userspace can change these afterwards to be on + * the safe side we stick with _DSM and prevent usage of + * _PR3 from the bridge. + */ + pci_d3cold_disable(pdev); + return false; + } + parent_adev = ACPI_COMPANION(&parent_pdev->dev); if (!parent_adev) return false; -- cgit v1.3-18-gd494 From 237e15dfd5d651868726111c3a9d828bec700490 Mon Sep 17 00:00:00 2001 From: Ashok Raj Nagarajan Date: Fri, 19 Aug 2016 13:37:37 +0300 Subject: ath10k: fix get rx_status from htt context On handling amsdu on rx path, get the rx_status from htt context. Without this fix, we are seeing warnings when running DBDC traffic like this. WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4105 ieee80211_rx_napi+0x88/0x7d8 [mac80211]() [ 1715.878248] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.21 #1 [ 1715.878273] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 1715.878293] [] (show_stack) from [] (dump_stack+0x70/0xbc) [ 1715.878315] [] (dump_stack) from [] (warn_slowpath_common+0x64/0x88) [ 1715.878339] [] (warn_slowpath_common) from [] (warn_slowpath_null+0x18/0x20) [ 1715.878395] [] (warn_slowpath_null) from [] (ieee80211_rx_napi+0x88/0x7d8 [mac80211]) [ 1715.878474] [] (ieee80211_rx_napi [mac80211]) from [] (ath10k_htt_t2h_msg_handler+0xb48/0xbfc [ath10k_core]) [ 1715.878535] [] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [] (ath10k_htt_t2h_msg_handler+0xbf8/0xbfc [ath10k_core]) [ 1715.878597] [] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [] (ath10k_htt_txrx_compl_task+0xa54/0x1170 [ath10k_core]) [ 1715.878639] [] (ath10k_htt_txrx_compl_task [ath10k_core]) from [] (tasklet_action+0xb4/0x130) [ 1715.878659] [] (tasklet_action) from [] (__do_softirq+0xe0/0x210) [ 1715.878678] [] (__do_softirq) from [] (irq_exit+0x84/0xe0) [ 1715.878700] [] (irq_exit) from [] (__handle_domain_irq+0x98/0xd0) [ 1715.878722] [] (__handle_domain_irq) from [] (gic_handle_irq+0x38/0x5c) [ 1715.878741] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) [ 1715.878753] Exception stack(0xc05f9f50 to 0xc05f9f98) [ 1715.878767] 9f40: ffffffed 00000000 00399e1e c000a220 [ 1715.878786] 9f60: 00000000 c05f6780 c05f8000 00000000 c05f5db8 ffffffed c05f8000 c04d1980 [ 1715.878802] 9f80: 00000000 c05f9f98 c0018110 c0018114 60000013 ffffffff [ 1715.878822] [] (__irq_svc) from [] (arch_cpu_idle+0x2c/0x50) [ 1715.878844] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x108/0x234) [ 1715.878866] [] (cpu_startup_entry) from [] (start_kernel+0x33c/0x3b8) [ 1715.878879] ---[ end trace 6d5e1cc0fef8ed6a ]--- [ 1715.878899] ------------[ cut here ]------------ Fixes: 18235664e7f9 ("ath10k: cleanup amsdu processing for rx indication") Signed-off-by: Ashok Raj Nagarajan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 78db5d679f19..24c8d65bcf34 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1525,7 +1525,7 @@ static void ath10k_htt_rx_h_filter(struct ath10k *ar, static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt) { struct ath10k *ar = htt->ar; - static struct ieee80211_rx_status rx_status; + struct ieee80211_rx_status *rx_status = &htt->rx_status; struct sk_buff_head amsdu; int ret; @@ -1549,11 +1549,11 @@ static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt) return ret; } - ath10k_htt_rx_h_ppdu(ar, &amsdu, &rx_status, 0xffff); + ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff); ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0); - ath10k_htt_rx_h_filter(ar, &amsdu, &rx_status); - ath10k_htt_rx_h_mpdu(ar, &amsdu, &rx_status); - ath10k_htt_rx_h_deliver(ar, &amsdu, &rx_status); + ath10k_htt_rx_h_filter(ar, &amsdu, rx_status); + ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status); + ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status); return 0; } -- cgit v1.3-18-gd494 From 4e80ffab0e722911842b59299dbf8033709673e5 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 19 Aug 2016 13:37:37 +0300 Subject: ath10k: Remove driver log suggesting QCA9887 support is experimental Support for QCA9887 is no longer experimental and if there are any issues we need to address them Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/pci.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 9a22c478dd1b..07933c51a850 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -3162,7 +3162,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, pci_hard_reset = ath10k_pci_qca988x_chip_reset; break; case QCA9887_1_0_DEVICE_ID: - dev_warn(&pdev->dev, "QCA9887 support is still experimental, there are likely bugs. You have been warned.\n"); hw_rev = ATH10K_HW_QCA9887; pci_ps = false; pci_soft_reset = ath10k_pci_warm_reset; -- cgit v1.3-18-gd494 From c012268b37db6b10b59dac9b7f45956cb9a8bcb2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 5 Aug 2016 14:25:53 -0700 Subject: lkdtm: Mark lkdtm_rodata_do_nothing() notrace lkdtm_rodata_do_nothing() is an empty function which is generated in order to test the non-executability of rodata. Currently if function tracing is enabled then an mcount callsite will be generated for lkdtm_rodata_do_nothing(), and it will appear in the list of available functions for function tracing (available_filter_functions). Given it's purpose purely as a test function, it seems preferable for lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as traceable. This also avoids triggering a linker bug on powerpc: https://sourceware.org/bugzilla/show_bug.cgi?id=20428 When the linker sees code that needs to generate a call stub, eg. a branch to mcount(), it assumes the section is executable and dereferences a NULL pointer leading to a linker segfault. Marking lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the function contains no other function calls. Signed-off-by: Michael Ellerman Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman --- drivers/misc/lkdtm_rodata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/lkdtm_rodata.c b/drivers/misc/lkdtm_rodata.c index 166b1db3969f..3564477b8c2d 100644 --- a/drivers/misc/lkdtm_rodata.c +++ b/drivers/misc/lkdtm_rodata.c @@ -4,7 +4,7 @@ */ #include "lkdtm.h" -void lkdtm_rodata_do_nothing(void) +void notrace lkdtm_rodata_do_nothing(void) { /* Does nothing. We just want an architecture agnostic "return". */ } -- cgit v1.3-18-gd494 From 25eb7e5c7454c9e8407c5382b9fe32d3b45fe163 Mon Sep 17 00:00:00 2001 From: Andreas Noever Date: Tue, 26 Jul 2016 18:40:37 +0200 Subject: thunderbolt: Fix resume quirk for Falcon Ridge 4C. The quirk 'quirk_apple_wait_for_thunderbolt' did not fire on Falcon Ridge 4C controllers with subdevice/subvendor set to zero. This lead to lost pci devices on system resume. Older thunderbolt controllers (pre Falcon Ridge) used the same device id for bridges and for the controller. On Apple hardware the subvendor- & subdevice-ids were set for the controller, but not for bridges. So that is what was used to differentiate between the two. Starting with Falcon Ridge bridges and controllers received different device ids. Additionally on some MacBookPro models (but not all) the subvendor/subdevice was zeroed. Starting with a42fb351c (thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller) the thunderbolt driver binds to all Falcon Ridge 4C controllers (irregardless of subvendor/subdevice). The corresponding quirk was not updated. This commit changes the quirk to check the device class instead of its subvendor-/subdeviceids. This works for all generations of Thunderbolt controllers. Signed-off-by: Andreas Noever Reviewed-by: Lukas Wunner Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 37ff0158e45f..6ff6469dab2a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3328,8 +3328,7 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) - || nhi->subsystem_vendor != 0x2222 - || nhi->subsystem_device != 0x1111) + || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) goto out; dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); device_pm_wait_for_dev(&dev->dev, &nhi->dev); -- cgit v1.3-18-gd494 From 82a6a81c2a38aa7a7813a0c532637877773c50ae Mon Sep 17 00:00:00 2001 From: Xavier Gnata Date: Tue, 26 Jul 2016 18:40:38 +0200 Subject: thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. From: Xavier Gnata Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk to support suspend/resume. Tested against 4.7 master on a MacBook Air 11" 2015. Signed-off-by: Andreas Noever Reviewed-by: Lukas Wunner Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 4 ++++ drivers/thunderbolt/nhi.c | 6 ++++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6ff6469dab2a..44e0ff37480b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3327,6 +3327,7 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) if (nhi->vendor != PCI_VENDOR_ID_INTEL || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && + nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) goto out; @@ -3342,6 +3343,9 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, quirk_apple_wait_for_thunderbolt); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, + quirk_apple_wait_for_thunderbolt); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, quirk_apple_wait_for_thunderbolt); diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index 9c15344b657a..a8c20413dbda 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -648,6 +648,12 @@ static struct pci_device_id nhi_ids[] = { .device = PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, .subvendor = 0x2222, .subdevice = 0x1111, }, + { + .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI, + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, + }, { .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, .vendor = PCI_VENDOR_ID_INTEL, -- cgit v1.3-18-gd494 From ccdf3b888d87df1b914fedde91ed1848f0651c65 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Wed, 3 Aug 2016 10:44:12 +0200 Subject: thunderbolt: Don't declare Falcon Ridge unsupported Falcon Ridge 4C has been supported by the driver from the beginning, Falcon Ridge 2C support was just added. Don't irritate users with a warning declaring the opposite. Signed-off-by: Lukas Wunner Signed-off-by: Andreas Noever Signed-off-by: Greg Kroah-Hartman --- drivers/thunderbolt/switch.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 1e116f53d6dd..9840fdecb73b 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -372,7 +372,9 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route) if (sw->config.device_id != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && sw->config.device_id != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && - sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE) + sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE && + sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE && + sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE) tb_sw_warn(sw, "unsupported switch device id %#x\n", sw->config.device_id); -- cgit v1.3-18-gd494 From 5db4f7f80d165fc9725f356e99feec409e446baa Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 16 Aug 2016 15:06:54 +0300 Subject: Revert "tty/serial/8250: use mctrl_gpio helpers" Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko Tested-by: Heikki Krogerus Tested-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/serial/8250.txt | 19 ------------ drivers/tty/serial/8250/8250.h | 35 +---------------------- drivers/tty/serial/8250/8250_core.c | 9 ------ drivers/tty/serial/8250/8250_omap.c | 31 +++++++++----------- drivers/tty/serial/8250/8250_port.c | 7 +---- drivers/tty/serial/8250/Kconfig | 1 - include/linux/serial_8250.h | 1 - 7 files changed, 15 insertions(+), 88 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index f5561ac7e17e..936ab5b87324 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -42,9 +42,6 @@ Optional properties: - auto-flow-control: one way to enable automatic flow control support. The driver is allowed to detect support for the capability even without this property. -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD - line respectively. It will use specified GPIO instead of the peripheral - function pin for the UART feature. If unsure, don't specify this property. Note: * fsl,ns16550: @@ -66,19 +63,3 @@ Example: interrupts = <10>; reg-shift = <2>; }; - -Example for OMAP UART using GPIO-based modem control signals: - - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; - rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; - dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 122e0e4029fe..1a16feac9a36 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -15,8 +15,6 @@ #include #include -#include "../serial_mctrl_gpio.h" - struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); @@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p); static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) { - int mctrl_gpio = 0; - serial_out(up, UART_MCR, value); - - if (value & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (value & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio_set(up->gpios, mctrl_gpio); } static inline int serial8250_in_MCR(struct uart_8250_port *up) { - int mctrl, mctrl_gpio = 0; - - mctrl = serial_in(up, UART_MCR); - - /* save current MCR values */ - if (mctrl & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (mctrl & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); - - if (mctrl_gpio & TIOCM_RTS) - mctrl |= UART_MCR_RTS; - else - mctrl &= ~UART_MCR_RTS; - - if (mctrl_gpio & TIOCM_DTR) - mctrl |= UART_MCR_DTR; - else - mctrl &= ~UART_MCR_DTR; - - return mctrl; + return serial_in(up, UART_MCR); } #if defined(__alpha__) && !defined(CONFIG_PCI) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 13ad5c3d2e68..dcf43f66404f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart = serial8250_find_match_or_unused(&up->port); if (uart && uart->port.type != PORT_8250_CIR) { - struct mctrl_gpios *gpios; - if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); @@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->port.flags & UPF_FIXED_TYPE) uart->port.type = up->port.type; - gpios = mctrl_gpio_init(&uart->port, 0); - if (IS_ERR(gpios)) { - if (PTR_ERR(gpios) != -ENOSYS) - return PTR_ERR(gpios); - } else - uart->gpios = gpios; - serial8250_set_defaults(uart); /* Possibly override default I/O functions. */ diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index e14982f36a04..61ad6c3b20a0 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { - /* - * Turn off autoRTS if RTS is lowered and restore autoRTS - * setting if RTS is raised - */ - lcr = serial_in(up, UART_LCR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) - priv->efr |= UART_EFR_RTS; - else - priv->efr &= ~UART_EFR_RTS; - serial_out(up, UART_EFR, priv->efr); - serial_out(up, UART_LCR, lcr); - } + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); } /* @@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port, priv->efr = 0; up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW - && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7481b95c6d84..bdfa659b9606 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_disable_ms(up->gpios); - up->ier &= ~UART_IER_MSI; serial_port_out(port, UART_IER, up->ier); } @@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_enable_ms(up->gpios); - up->ier |= UART_IER_MSI; serial8250_rpm_get(up); @@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port) ret |= TIOCM_DSR; if (status & UART_MSR_CTS) ret |= TIOCM_CTS; - - return mctrl_gpio_get(up->gpios, &ret); + return ret; } EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c9ec839a5ddf..7c6f7afca5dd 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -6,7 +6,6 @@ config SERIAL_8250 tristate "8250/16550 and compatible serial support" select SERIAL_CORE - select SERIAL_MCTRL_GPIO if GPIOLIB ---help--- This selects whether you want to include the driver for the standard serial ports. The standard answer is Y. People who might say N diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 923266cd294a..48ec7651989b 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -111,7 +111,6 @@ struct uart_8250_port { * if no_console_suspend */ unsigned char probe; - struct mctrl_gpios *gpios; #define UART_PROBE_RSA (1 << 0) /* -- cgit v1.3-18-gd494 From 47b34d2ef266e2c283b514d65c8963c2ccd42474 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Jul 2016 17:21:49 +0300 Subject: serial: 8250_mid: fix divide error bug if baud rate is 0 Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_mid.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index 339de9cd0866..20c5db2f4264 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -168,6 +168,9 @@ static void mid8250_set_termios(struct uart_port *p, unsigned long w = BIT(24) - 1; unsigned long mul, div; + /* Gracefully handle the B0 case: fall back to B9600 */ + fuart = fuart ? fuart : 9600 * 16; + if (mid->board->freq < fuart) { /* Find prescaler value that satisfies Fuart < Fref */ if (mid->board->freq > baud) -- cgit v1.3-18-gd494 From c8d192428f52f244130b84650ad616df09f2b1e1 Mon Sep 17 00:00:00 2001 From: Jimi Damon Date: Wed, 20 Jul 2016 17:00:40 -0700 Subject: serial: 8250: added acces i/o products quad and octal serial cards Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 139 +++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 20ebaea5c414..bc51b32b2774 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1950,6 +1950,43 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 #define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 +#define PCI_VENDOR_ID_ACCESIO 0x494f +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8 + + + /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 @@ -5112,6 +5149,108 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_pericom_PI7C9X7958 }, + /* + * ACCES I/O Products quad + */ + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, /* * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) */ -- cgit v1.3-18-gd494 From 8b18e2359aff2ab810aba84cebffc9da07fef78f Mon Sep 17 00:00:00 2001 From: Horia Geantă Date: Mon, 29 Aug 2016 14:52:14 +0300 Subject: crypto: caam - fix IV loading for authenc (giv)decryption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For algorithms that implement IV generators before the crypto ops, the IV needed for decryption is initially located in req->src scatterlist, not in req->iv. Avoid copying the IV into req->iv by modifying the (givdecrypt) descriptors to load it directly from req->src. aead_givdecrypt() is no longer needed and goes away. Cc: # 4.3+ Fixes: 479bcc7c5b9e ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 77 +++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 6dc597126b79..b3044219772c 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -556,7 +556,10 @@ skip_enc: /* Read and write assoclen bytes */ append_math_add(desc, VARSEQINLEN, ZERO, REG3, CAAM_CMD_SZ); - append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, CAAM_CMD_SZ); + if (alg->caam.geniv) + append_math_add_imm_u32(desc, VARSEQOUTLEN, REG3, IMM, ivsize); + else + append_math_add(desc, VARSEQOUTLEN, ZERO, REG3, CAAM_CMD_SZ); /* Skip assoc data */ append_seq_fifo_store(desc, 0, FIFOST_TYPE_SKIP | FIFOLDST_VLF); @@ -565,6 +568,14 @@ skip_enc: append_seq_fifo_load(desc, 0, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_MSG | KEY_VLF); + if (alg->caam.geniv) { + append_seq_load(desc, ivsize, LDST_CLASS_1_CCB | + LDST_SRCDST_BYTE_CONTEXT | + (ctx1_iv_off << LDST_OFFSET_SHIFT)); + append_move(desc, MOVE_SRC_CLASS1CTX | MOVE_DEST_CLASS2INFIFO | + (ctx1_iv_off << MOVE_OFFSET_SHIFT) | ivsize); + } + /* Load Counter into CONTEXT1 reg */ if (is_rfc3686) append_load_imm_u32(desc, be32_to_cpu(1), LDST_IMM | @@ -2150,7 +2161,7 @@ static void init_authenc_job(struct aead_request *req, init_aead_job(req, edesc, all_contig, encrypt); - if (ivsize && (is_rfc3686 || !(alg->caam.geniv && encrypt))) + if (ivsize && ((is_rfc3686 && encrypt) || !alg->caam.geniv)) append_load_as_imm(desc, req->iv, ivsize, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT | @@ -2537,20 +2548,6 @@ static int aead_decrypt(struct aead_request *req) return ret; } -static int aead_givdecrypt(struct aead_request *req) -{ - struct crypto_aead *aead = crypto_aead_reqtfm(req); - unsigned int ivsize = crypto_aead_ivsize(aead); - - if (req->cryptlen < ivsize) - return -EINVAL; - - req->cryptlen -= ivsize; - req->assoclen += ivsize; - - return aead_decrypt(req); -} - /* * allocate and map the ablkcipher extended descriptor for ablkcipher */ @@ -3210,7 +3207,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = MD5_DIGEST_SIZE, }, @@ -3256,7 +3253,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = SHA1_DIGEST_SIZE, }, @@ -3302,7 +3299,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = SHA224_DIGEST_SIZE, }, @@ -3348,7 +3345,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = SHA256_DIGEST_SIZE, }, @@ -3394,7 +3391,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = SHA384_DIGEST_SIZE, }, @@ -3440,7 +3437,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = AES_BLOCK_SIZE, .maxauthsize = SHA512_DIGEST_SIZE, }, @@ -3486,7 +3483,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = MD5_DIGEST_SIZE, }, @@ -3534,7 +3531,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = SHA1_DIGEST_SIZE, }, @@ -3582,7 +3579,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = SHA224_DIGEST_SIZE, }, @@ -3630,7 +3627,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = SHA256_DIGEST_SIZE, }, @@ -3678,7 +3675,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = SHA384_DIGEST_SIZE, }, @@ -3726,7 +3723,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES3_EDE_BLOCK_SIZE, .maxauthsize = SHA512_DIGEST_SIZE, }, @@ -3772,7 +3769,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = MD5_DIGEST_SIZE, }, @@ -3818,7 +3815,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = SHA1_DIGEST_SIZE, }, @@ -3864,7 +3861,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = SHA224_DIGEST_SIZE, }, @@ -3910,7 +3907,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = SHA256_DIGEST_SIZE, }, @@ -3956,7 +3953,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = SHA384_DIGEST_SIZE, }, @@ -4002,7 +3999,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = DES_BLOCK_SIZE, .maxauthsize = SHA512_DIGEST_SIZE, }, @@ -4051,7 +4048,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = MD5_DIGEST_SIZE, }, @@ -4102,7 +4099,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = SHA1_DIGEST_SIZE, }, @@ -4153,7 +4150,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = SHA224_DIGEST_SIZE, }, @@ -4204,7 +4201,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = SHA256_DIGEST_SIZE, }, @@ -4255,7 +4252,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = SHA384_DIGEST_SIZE, }, @@ -4306,7 +4303,7 @@ static struct caam_aead_alg driver_aeads[] = { .setkey = aead_setkey, .setauthsize = aead_setauthsize, .encrypt = aead_encrypt, - .decrypt = aead_givdecrypt, + .decrypt = aead_decrypt, .ivsize = CTR_RFC3686_IV_SIZE, .maxauthsize = SHA512_DIGEST_SIZE, }, -- cgit v1.3-18-gd494 From 8e018c21da3febb558586b48c8db0d6d66cb6593 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 25 Aug 2016 10:09:39 -0700 Subject: raid5-cache: fix a deadlock in superblock write There is a potential deadlock in superblock write. Discard could zero data, so before discard we must make sure superblock is updated to new log tail. Updating superblock (either directly call md_update_sb() or depend on md thread) must hold reconfig mutex. On the other hand, raid5_quiesce is called with reconfig_mutex hold. The first step of raid5_quiesce() is waitting for all IO finish, hence waitting for reclaim thread, while reclaim thread is calling this function and waitting for reconfig mutex. So there is a deadlock. We workaround this issue with a trylock. The downside of the solution is we could miss discard if we can't take reconfig mutex. But this should happen rarely (mainly in raid array stop), so miss discard shouldn't be a big problem. Cc: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 46 +++++++++++++++------------------------------- 1 file changed, 15 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 51f76ddbe265..1b1ab4a1d132 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -96,7 +96,6 @@ struct r5l_log { spinlock_t no_space_stripes_lock; bool need_cache_flush; - bool in_teardown; }; /* @@ -704,31 +703,22 @@ static void r5l_write_super_and_discard_space(struct r5l_log *log, mddev = log->rdev->mddev; /* - * This is to avoid a deadlock. r5l_quiesce holds reconfig_mutex and - * wait for this thread to finish. This thread waits for - * MD_CHANGE_PENDING clear, which is supposed to be done in - * md_check_recovery(). md_check_recovery() tries to get - * reconfig_mutex. Since r5l_quiesce already holds the mutex, - * md_check_recovery() fails, so the PENDING never get cleared. The - * in_teardown check workaround this issue. + * Discard could zero data, so before discard we must make sure + * superblock is updated to new log tail. Updating superblock (either + * directly call md_update_sb() or depend on md thread) must hold + * reconfig mutex. On the other hand, raid5_quiesce is called with + * reconfig_mutex hold. The first step of raid5_quiesce() is waitting + * for all IO finish, hence waitting for reclaim thread, while reclaim + * thread is calling this function and waitting for reconfig mutex. So + * there is a deadlock. We workaround this issue with a trylock. + * FIXME: we could miss discard if we can't take reconfig mutex */ - if (!log->in_teardown) { - set_mask_bits(&mddev->flags, 0, - BIT(MD_CHANGE_DEVS) | BIT(MD_CHANGE_PENDING)); - md_wakeup_thread(mddev->thread); - wait_event(mddev->sb_wait, - !test_bit(MD_CHANGE_PENDING, &mddev->flags) || - log->in_teardown); - /* - * r5l_quiesce could run after in_teardown check and hold - * mutex first. Superblock might get updated twice. - */ - if (log->in_teardown) - md_update_sb(mddev, 1); - } else { - WARN_ON(!mddev_is_locked(mddev)); - md_update_sb(mddev, 1); - } + set_mask_bits(&mddev->flags, 0, + BIT(MD_CHANGE_DEVS) | BIT(MD_CHANGE_PENDING)); + if (!mddev_trylock(mddev)) + return; + md_update_sb(mddev, 1); + mddev_unlock(mddev); /* discard IO error really doesn't matter, ignore it */ if (log->last_checkpoint < end) { @@ -827,7 +817,6 @@ void r5l_quiesce(struct r5l_log *log, int state) if (!log || state == 2) return; if (state == 0) { - log->in_teardown = 0; /* * This is a special case for hotadd. In suspend, the array has * no journal. In resume, journal is initialized as well as the @@ -838,11 +827,6 @@ void r5l_quiesce(struct r5l_log *log, int state) log->reclaim_thread = md_register_thread(r5l_reclaim_thread, log->rdev->mddev, "reclaim"); } else if (state == 1) { - /* - * at this point all stripes are finished, so io_unit is at - * least in STRIPE_END state - */ - log->in_teardown = 1; /* make sure r5l_write_super_and_discard_space exits */ mddev = log->rdev->mddev; wake_up(&mddev->sb_wait); -- cgit v1.3-18-gd494 From ad5b0f7685dbfc4730987cd16af3c5ebe8133f10 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 30 Aug 2016 10:29:33 -0700 Subject: raid5: guarantee enough stripes to avoid reshape hang If there aren't enough stripes, reshape will hang. We have a check for this in new reshape, but miss it for reshape resume, hence we could see hang in reshape resume. This patch forces enough stripes existed if reshape resumes. Reviewed-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index da583bb43c84..b95c54c0e596 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -6639,6 +6639,16 @@ static struct r5conf *setup_conf(struct mddev *mddev) } conf->min_nr_stripes = NR_STRIPES; + if (mddev->reshape_position != MaxSector) { + int stripes = max_t(int, + ((mddev->chunk_sectors << 9) / STRIPE_SIZE) * 4, + ((mddev->new_chunk_sectors << 9) / STRIPE_SIZE) * 4); + conf->min_nr_stripes = max(NR_STRIPES, stripes); + if (conf->min_nr_stripes != NR_STRIPES) + printk(KERN_INFO + "md/raid:%s: force stripe size %d for reshape\n", + mdname(mddev), conf->min_nr_stripes); + } memory = conf->min_nr_stripes * (sizeof(struct stripe_head) + max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; atomic_set(&conf->empty_inactive_list_nr, NR_STRIPE_HASH_LOCKS); -- cgit v1.3-18-gd494 From 10ea9434065e56fe14287f89258ecf2fb684ed1a Mon Sep 17 00:00:00 2001 From: jimqu Date: Tue, 30 Aug 2016 08:59:42 +0800 Subject: drm/amd/amdgpu: sdma resume fail during S4 on CI SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by: JimQu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/cik_sdma.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c index ee6466912497..77fdd9911c3c 100644 --- a/drivers/gpu/drm/amd/amdgpu/cik_sdma.c +++ b/drivers/gpu/drm/amd/amdgpu/cik_sdma.c @@ -52,6 +52,7 @@ static void cik_sdma_set_ring_funcs(struct amdgpu_device *adev); static void cik_sdma_set_irq_funcs(struct amdgpu_device *adev); static void cik_sdma_set_buffer_funcs(struct amdgpu_device *adev); static void cik_sdma_set_vm_pte_funcs(struct amdgpu_device *adev); +static int cik_sdma_soft_reset(void *handle); MODULE_FIRMWARE("radeon/bonaire_sdma.bin"); MODULE_FIRMWARE("radeon/bonaire_sdma1.bin"); @@ -1037,6 +1038,8 @@ static int cik_sdma_resume(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + cik_sdma_soft_reset(handle); + return cik_sdma_hw_init(adev); } -- cgit v1.3-18-gd494 From 53960b4f89db58bc155d6f8aa0a44ccc59ccb26f Mon Sep 17 00:00:00 2001 From: jimqu Date: Tue, 30 Aug 2016 09:03:16 +0800 Subject: drm/amd/amdgpu: compute ring test fail during S4 on CI unhalt Instrction Fetch Unit after all rings are inited. Signed-off-by: JimQu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c index d869d058ef24..425413fcaf02 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c @@ -2755,8 +2755,7 @@ static int gfx_v7_0_cp_compute_resume(struct amdgpu_device *adev) u64 wb_gpu_addr; u32 *buf; struct bonaire_mqd *mqd; - - gfx_v7_0_cp_compute_enable(adev, true); + struct amdgpu_ring *ring; /* fix up chicken bits */ tmp = RREG32(mmCP_CPF_DEBUG); @@ -2791,7 +2790,7 @@ static int gfx_v7_0_cp_compute_resume(struct amdgpu_device *adev) /* init the queues. Just two for now. */ for (i = 0; i < adev->gfx.num_compute_rings; i++) { - struct amdgpu_ring *ring = &adev->gfx.compute_ring[i]; + ring = &adev->gfx.compute_ring[i]; if (ring->mqd_obj == NULL) { r = amdgpu_bo_create(adev, @@ -2970,6 +2969,13 @@ static int gfx_v7_0_cp_compute_resume(struct amdgpu_device *adev) amdgpu_bo_unreserve(ring->mqd_obj); ring->ready = true; + } + + gfx_v7_0_cp_compute_enable(adev, true); + + for (i = 0; i < adev->gfx.num_compute_rings; i++) { + ring = &adev->gfx.compute_ring[i]; + r = amdgpu_ring_test_ring(ring); if (r) ring->ready = false; -- cgit v1.3-18-gd494 From 1f703e6679f373f5bba4efe7093aa82e91af4037 Mon Sep 17 00:00:00 2001 From: Chunming Zhou Date: Tue, 30 Aug 2016 17:59:11 +0800 Subject: drm/amdgpu: record error code when ring test failed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we may miss errors. Signed-off-by: Chunming Zhou Reviewed-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c index a31d7ef3032c..ec1282af2479 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c @@ -280,7 +280,7 @@ void amdgpu_ib_pool_fini(struct amdgpu_device *adev) int amdgpu_ib_ring_tests(struct amdgpu_device *adev) { unsigned i; - int r; + int r, ret = 0; for (i = 0; i < AMDGPU_MAX_RINGS; ++i) { struct amdgpu_ring *ring = adev->rings[i]; @@ -301,10 +301,11 @@ int amdgpu_ib_ring_tests(struct amdgpu_device *adev) } else { /* still not good, but we can live with it */ DRM_ERROR("amdgpu: failed testing IB on ring %d (%d).\n", i, r); + ret = r; } } } - return 0; + return ret; } /* -- cgit v1.3-18-gd494 From c6f1dc4d9ce275c1bd9d90b5630f36ca6abccc97 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:27 +0800 Subject: net: ethernet: mediatek: fix fails from TX housekeeping due to incorrect port setup which net device the SKB is complete for depends on the forward port on txd4 on the corresponding TX descriptor, but the information isn't set up well in case of SKB fragments that would lead to watchdog timeout from the upper layer, so fix it up. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index f1609542adf1..7fc2ff0c5bf0 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -588,14 +588,15 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, dma_addr_t mapped_addr; unsigned int nr_frags; int i, n_desc = 1; - u32 txd4 = 0; + u32 txd4 = 0, fport; itxd = ring->next_free; if (itxd == ring->last_free) return -ENOMEM; /* set the forward port */ - txd4 |= (mac->id + 1) << TX_DMA_FPORT_SHIFT; + fport = (mac->id + 1) << TX_DMA_FPORT_SHIFT; + txd4 |= fport; tx_buf = mtk_desc_to_tx_buf(ring, itxd); memset(tx_buf, 0, sizeof(*tx_buf)); @@ -653,7 +654,7 @@ static int mtk_tx_map(struct sk_buff *skb, struct net_device *dev, WRITE_ONCE(txd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(frag_map_size) | last_frag * TX_DMA_LS0)); - WRITE_ONCE(txd->txd4, 0); + WRITE_ONCE(txd->txd4, fport); tx_buf->skb = (struct sk_buff *)MTK_DMA_DUMMY_DESC; tx_buf = mtk_desc_to_tx_buf(ring, txd); -- cgit v1.3-18-gd494 From 549e5495467ac2a76489f1304e2b4a7ad85e1644 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:28 +0800 Subject: net: ethernet: mediatek: fix incorrect return value of devm_clk_get with EPROBE_DEFER 1) If the return value of devm_clk_get is EPROBE_DEFER, we should defer probing the driver. The change is verified and works based on 4.8-rc1 staying with the latest clk-next code for MT7623. 2) Changing with the usage of loops to work out if all clocks required are fine Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 39 ++++++++++++++++------------- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 22 ++++++++++------ 2 files changed, 36 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 7fc2ff0c5bf0..a5dcf5741495 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -50,6 +50,10 @@ static const struct mtk_ethtool_stats { MTK_ETHTOOL_STAT(rx_flow_control_packets), }; +static const char * const mtk_clks_source_name[] = { + "ethif", "esw", "gp1", "gp2" +}; + void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg) { __raw_writel(val, eth->base + reg); @@ -1814,6 +1818,7 @@ static int mtk_probe(struct platform_device *pdev) if (!eth) return -ENOMEM; + eth->dev = &pdev->dev; eth->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(eth->base)) return PTR_ERR(eth->base); @@ -1848,21 +1853,21 @@ static int mtk_probe(struct platform_device *pdev) return -ENXIO; } } + for (i = 0; i < ARRAY_SIZE(eth->clks); i++) { + eth->clks[i] = devm_clk_get(eth->dev, + mtk_clks_source_name[i]); + if (IS_ERR(eth->clks[i])) { + if (PTR_ERR(eth->clks[i]) == -EPROBE_DEFER) + return -EPROBE_DEFER; + return -ENODEV; + } + } - eth->clk_ethif = devm_clk_get(&pdev->dev, "ethif"); - eth->clk_esw = devm_clk_get(&pdev->dev, "esw"); - eth->clk_gp1 = devm_clk_get(&pdev->dev, "gp1"); - eth->clk_gp2 = devm_clk_get(&pdev->dev, "gp2"); - if (IS_ERR(eth->clk_esw) || IS_ERR(eth->clk_gp1) || - IS_ERR(eth->clk_gp2) || IS_ERR(eth->clk_ethif)) - return -ENODEV; - - clk_prepare_enable(eth->clk_ethif); - clk_prepare_enable(eth->clk_esw); - clk_prepare_enable(eth->clk_gp1); - clk_prepare_enable(eth->clk_gp2); + clk_prepare_enable(eth->clks[MTK_CLK_ETHIF]); + clk_prepare_enable(eth->clks[MTK_CLK_ESW]); + clk_prepare_enable(eth->clks[MTK_CLK_GP1]); + clk_prepare_enable(eth->clks[MTK_CLK_GP2]); - eth->dev = &pdev->dev; eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE); INIT_WORK(ð->pending_work, mtk_pending_work); @@ -1905,10 +1910,10 @@ static int mtk_remove(struct platform_device *pdev) { struct mtk_eth *eth = platform_get_drvdata(pdev); - clk_disable_unprepare(eth->clk_ethif); - clk_disable_unprepare(eth->clk_esw); - clk_disable_unprepare(eth->clk_gp1); - clk_disable_unprepare(eth->clk_gp2); + clk_disable_unprepare(eth->clks[MTK_CLK_ETHIF]); + clk_disable_unprepare(eth->clks[MTK_CLK_ESW]); + clk_disable_unprepare(eth->clks[MTK_CLK_GP1]); + clk_disable_unprepare(eth->clks[MTK_CLK_GP2]); netif_napi_del(ð->tx_napi); netif_napi_del(ð->rx_napi); diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index f82e3acb947b..6e1ade7a25c5 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -290,6 +290,17 @@ enum mtk_tx_flags { MTK_TX_FLAGS_PAGE0 = 0x02, }; +/* This enum allows us to identify how the clock is defined on the array of the + * clock in the order + */ +enum mtk_clks_map { + MTK_CLK_ETHIF, + MTK_CLK_ESW, + MTK_CLK_GP1, + MTK_CLK_GP2, + MTK_CLK_MAX +}; + /* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at * by the TX descriptor s * @skb: The SKB pointer of the packet being sent @@ -370,10 +381,7 @@ struct mtk_rx_ring { * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. - * @clk_ethif: The ethif clock - * @clk_esw: The switch clock - * @clk_gp1: The gmac1 clock - * @clk_gp2: The gmac2 clock + * @clks: clock array for all clocks required * @mii_bus: If there is a bus we need to create an instance for it * @pending_work: The workqueue used to reset the dma ring */ @@ -400,10 +408,8 @@ struct mtk_eth { struct mtk_tx_dma *scratch_ring; dma_addr_t phy_scratch_ring; void *scratch_head; - struct clk *clk_ethif; - struct clk *clk_esw; - struct clk *clk_gp1; - struct clk *clk_gp2; + struct clk *clks[MTK_CLK_MAX]; + struct mii_bus *mii_bus; struct work_struct pending_work; }; -- cgit v1.3-18-gd494 From 1b43079906367d4d6e1ad00f04fff525a32e26c4 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:29 +0800 Subject: net: ethernet: mediatek: fix API usage with skb_free_frag use skb_free_frag() instead of legacy put_page() Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index a5dcf5741495..c9e25a753524 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -870,7 +870,7 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget, /* receive data */ skb = build_skb(data, ring->frag_size); if (unlikely(!skb)) { - put_page(virt_to_head_page(new_data)); + skb_free_frag(new_data); netdev->stats.rx_dropped++; goto release_desc; } -- cgit v1.3-18-gd494 From d3bd1ce4db8e843dce421e2f8f123e5251a9c7d3 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:30 +0800 Subject: net: ethernet: mediatek: remove redundant free_irq for devm_request_irq allocated irq these irqs are not used for shared irq and disabled during ethernet stops. irq requested by devm_request_irq is safe to be freed automatically on driver detach. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index c9e25a753524..1ffde919174d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1513,8 +1513,6 @@ static void mtk_uninit(struct net_device *dev) phy_disconnect(mac->phy_dev); mtk_mdio_cleanup(eth); mtk_irq_disable(eth, ~0); - free_irq(eth->irq[1], dev); - free_irq(eth->irq[2], dev); } static int mtk_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -- cgit v1.3-18-gd494 From 7c6b0d76fa02213393815e3b6d5e4a415bf3f0e2 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:31 +0800 Subject: net: ethernet: mediatek: fix logic unbalance between probe and remove original mdio_cleanup is not in the symmetric place against where mdio_init is, so relocate mdio_cleanup to the right one. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 1ffde919174d..bf5b7e1d9450 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1511,7 +1511,6 @@ static void mtk_uninit(struct net_device *dev) struct mtk_eth *eth = mac->hw; phy_disconnect(mac->phy_dev); - mtk_mdio_cleanup(eth); mtk_irq_disable(eth, ~0); } @@ -1916,6 +1915,7 @@ static int mtk_remove(struct platform_device *pdev) netif_napi_del(ð->tx_napi); netif_napi_del(ð->rx_napi); mtk_cleanup(eth); + mtk_mdio_cleanup(eth); platform_set_drvdata(pdev, NULL); return 0; -- cgit v1.3-18-gd494 From 79e9a41438527a4cc2b426a2dfb92cd0825d7d29 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:32 +0800 Subject: net: ethernet: mediatek: fix issue of driver removal with interface is up mtk_stop() must be called to stop for freeing DMA resources acquired and restoring state changed by mtk_open() firstly when module removal. Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index bf5b7e1d9450..556951e66978 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1906,6 +1906,14 @@ err_free_dev: static int mtk_remove(struct platform_device *pdev) { struct mtk_eth *eth = platform_get_drvdata(pdev); + int i; + + /* stop all devices to make sure that dma is properly shut down */ + for (i = 0; i < MTK_MAC_COUNT; i++) { + if (!eth->netdev[i]) + continue; + mtk_stop(eth->netdev[i]); + } clk_disable_unprepare(eth->clks[MTK_CLK_ETHIF]); clk_disable_unprepare(eth->clks[MTK_CLK_ESW]); -- cgit v1.3-18-gd494 From b5776f01bf1f36a6c89c6dc407dda6509002e0d7 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:33 +0800 Subject: net: ethernet: mediatek: fix the missing of_node_put() after node is used done inside mtk_mdio_init This patch adds the missing of_node_put() after finishing the usage of of_get_child_by_name. Signed-off-by: Sean Wang Acked-by: John Crispin Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 556951e66978..409efcf9b5c8 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -324,6 +324,7 @@ static int mtk_mdio_init(struct mtk_eth *eth) err = of_mdiobus_register(eth->mii_bus, mii_np); if (err) goto err_free_bus; + of_node_put(mii_np); return 0; -- cgit v1.3-18-gd494 From 1e515b7fdbaeef29b1025c09b50ebbb132a39208 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:34 +0800 Subject: net: ethernet: mediatek: use devm_mdiobus_alloc instead of mdiobus_alloc inside mtk_mdio_init a lot of parts in the driver uses devm_* APIs to gain benefits from the device resource management, so devm_mdiobus_alloc is also used instead of mdiobus_alloc to have more elegant code flow. Using common code provided by the devm_* helps to 1) have simplified the code flow as [1] says 2) decrease the risk of incorrect error handling by human 3) only a few drivers used it since it was proposed on linux 3.16, so just hope to promote for this. Ref: [1] https://patchwork.ozlabs.org/patch/344093/ Signed-off-by: Sean Wang Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 409efcf9b5c8..0367f510f81a 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -295,7 +295,7 @@ err_phy: static int mtk_mdio_init(struct mtk_eth *eth) { struct device_node *mii_np; - int err; + int ret; mii_np = of_get_child_by_name(eth->dev->of_node, "mdio-bus"); if (!mii_np) { @@ -304,13 +304,13 @@ static int mtk_mdio_init(struct mtk_eth *eth) } if (!of_device_is_available(mii_np)) { - err = 0; + ret = 0; goto err_put_node; } - eth->mii_bus = mdiobus_alloc(); + eth->mii_bus = devm_mdiobus_alloc(eth->dev); if (!eth->mii_bus) { - err = -ENOMEM; + ret = -ENOMEM; goto err_put_node; } @@ -321,20 +321,11 @@ static int mtk_mdio_init(struct mtk_eth *eth) eth->mii_bus->parent = eth->dev; snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name); - err = of_mdiobus_register(eth->mii_bus, mii_np); - if (err) - goto err_free_bus; - of_node_put(mii_np); - - return 0; - -err_free_bus: - mdiobus_free(eth->mii_bus); + ret = of_mdiobus_register(eth->mii_bus, mii_np); err_put_node: of_node_put(mii_np); - eth->mii_bus = NULL; - return err; + return ret; } static void mtk_mdio_cleanup(struct mtk_eth *eth) @@ -343,8 +334,6 @@ static void mtk_mdio_cleanup(struct mtk_eth *eth) return; mdiobus_unregister(eth->mii_bus); - of_node_put(eth->mii_bus->dev.of_node); - mdiobus_free(eth->mii_bus); } static inline void mtk_irq_disable(struct mtk_eth *eth, u32 mask) -- cgit v1.3-18-gd494 From aa6e8a54f653daaf34ff7fdceb2d992d714eea7c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Thu, 1 Sep 2016 10:47:35 +0800 Subject: net: ethernet: mediatek: fix error handling inside mtk_mdio_init Return -ENODEV if the MDIO bus is disabled in the device tree. Signed-off-by: Sean Wang Acked-by: John Crispin Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 0367f510f81a..d9199151a83e 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -304,7 +304,7 @@ static int mtk_mdio_init(struct mtk_eth *eth) } if (!of_device_is_available(mii_np)) { - ret = 0; + ret = -ENODEV; goto err_put_node; } -- cgit v1.3-18-gd494 From 5fe118c9fd6b8e129788c88a10ac0af82b255f81 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:52 -0400 Subject: qed*: Disallow dcbx configuration for VF interfaces. Dcbx configuration is not supported for VF interfaces. Hence don't populate the callbacks for VFs and also fail the dcbx-query for VFs. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 ++++ drivers/net/ethernet/qlogic/qede/qede_main.c | 3 ++- 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 226cb08cc055..7ad1667ee354 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -19,6 +19,7 @@ #include "qed_dcbx.h" #include "qed_hsi.h" #include "qed_sp.h" +#include "qed_sriov.h" #ifdef CONFIG_DCB #include #endif @@ -945,6 +946,9 @@ static int qed_dcbx_query_params(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt; int rc; + if (IS_VF(p_hwfn->cdev)) + return -EINVAL; + p_ptt = qed_ptt_acquire(p_hwfn); if (!p_ptt) return -EBUSY; diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index a6eb6af8cbe8..9544e4c41359 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2520,7 +2520,8 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, edev->ops->register_ops(cdev, &qede_ll_ops, edev); #ifdef CONFIG_DCB - qede_set_dcbnl_ops(edev->ndev); + if (!IS_VF(edev)) + qede_set_dcbnl_ops(edev->ndev); #endif INIT_DELAYED_WORK(&edev->sp_task, qede_sp_task); -- cgit v1.3-18-gd494 From 5ec5dfa4d29448002bb05018ba12620e7fafffd1 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:53 -0400 Subject: qed: Set selection-field while configuring the app entry in ieee mode. Management firmware requires the selection-field (SF) to be set for configuring the application/protocol entry in IEEE mode. Without this setting, the app entry will be configured incorrectly in MFW. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 7ad1667ee354..192a886edfe9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1063,23 +1063,31 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; if (ieee) { - *entry &= ~DCBX_APP_SF_IEEE_MASK; + *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK); switch (p_params->app_entry[i].sf_ieee) { case QED_DCBX_SF_IEEE_ETHTYPE: *entry |= ((u32)DCBX_APP_SF_IEEE_ETHTYPE << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_ETHTYPE << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; case QED_DCBX_SF_IEEE_TCP_UDP_PORT: *entry |= ((u32)DCBX_APP_SF_IEEE_TCP_UDP_PORT << DCBX_APP_SF_IEEE_SHIFT); + *entry |= ((u32)DCBX_APP_SF_PORT << + DCBX_APP_SF_SHIFT); break; } } else { -- cgit v1.3-18-gd494 From c5e801dac4daff972013613ae3edae6668b2aa7c Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Mon, 29 Aug 2016 08:29:54 -0400 Subject: qed: Clear dcbx memory buffers before the usage. This patch takes care of clearing the uninitialized buffer before using it. 1. pfc pri-enable bitmap need to be cleared before setting the requested enable bits. Without this, the un-touched values will be merged with requested values and sent to MFW. 2. The data in app-entry field need to be cleared before using it. 3. Clear the output data buffer used in qed_dcbx_query_params(). Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index 192a886edfe9..ad023fe7d156 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -988,6 +988,7 @@ qed_dcbx_set_pfc_data(struct qed_hwfn *p_hwfn, if (p_params->pfc.prio[i]) pfc_map |= BIT(i); + *pfc &= ~DCBX_PFC_PRI_EN_BITMAP_MASK; *pfc |= (pfc_map << DCBX_PFC_PRI_EN_BITMAP_SHIFT); DP_VERBOSE(p_hwfn, QED_MSG_DCB, "pfc = 0x%x\n", *pfc); @@ -1062,6 +1063,7 @@ qed_dcbx_set_app_data(struct qed_hwfn *p_hwfn, for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) { entry = &p_app->app_pri_tbl[i].entry; + *entry = 0; if (ieee) { *entry &= ~(DCBX_APP_SF_IEEE_MASK | DCBX_APP_SF_MASK); switch (p_params->app_entry[i].sf_ieee) { @@ -1193,6 +1195,7 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn, return -ENOMEM; } + memset(dcbx_info, 0, sizeof(*dcbx_info)); rc = qed_dcbx_query_params(p_hwfn, dcbx_info, QED_DCBX_OPERATIONAL_MIB); if (rc) { kfree(dcbx_info); @@ -1230,6 +1233,7 @@ static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn, return NULL; } + memset(dcbx_info, 0, sizeof(*dcbx_info)); if (qed_dcbx_query_params(hwfn, dcbx_info, type)) { kfree(dcbx_info); return NULL; -- cgit v1.3-18-gd494 From 5b004412e2b7894105ea6043d380b7ab21f244ef Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:40 +0200 Subject: mlxsw: spectrum_router: Fix failure caused by double fib removal from HW In mlxsw we squash tables 254 and 255 together into HW. Kernel adds/dels /32 ip to/from both 254 and 255. On del path, that causes the same prefix being removed twice. Fix this by introducing reference counting for private mlxsw fib entries. That required a bit of code reshuffle. Also put dev into fib entry key so the same prefix could be represented once per every router interface. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 126 +++++++++++++++------ 1 file changed, 92 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 917ddd1e422f..ed618144fed4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -107,6 +107,7 @@ mlxsw_sp_prefix_usage_clear(struct mlxsw_sp_prefix_usage *prefix_usage, } struct mlxsw_sp_fib_key { + struct net_device *dev; unsigned char addr[sizeof(struct in6_addr)]; unsigned char prefix_len; }; @@ -123,6 +124,7 @@ struct mlxsw_sp_fib_entry { struct rhash_head ht_node; struct mlxsw_sp_fib_key key; enum mlxsw_sp_fib_entry_type type; + unsigned int ref_count; u8 added:1; u16 rif; /* used for action local */ struct mlxsw_sp_vr *vr; @@ -171,13 +173,15 @@ static void mlxsw_sp_fib_entry_remove(struct mlxsw_sp_fib *fib, static struct mlxsw_sp_fib_entry * mlxsw_sp_fib_entry_create(struct mlxsw_sp_fib *fib, const void *addr, - size_t addr_len, unsigned char prefix_len) + size_t addr_len, unsigned char prefix_len, + struct net_device *dev) { struct mlxsw_sp_fib_entry *fib_entry; fib_entry = kzalloc(sizeof(*fib_entry), GFP_KERNEL); if (!fib_entry) return NULL; + fib_entry->key.dev = dev; memcpy(fib_entry->key.addr, addr, addr_len); fib_entry->key.prefix_len = prefix_len; return fib_entry; @@ -190,10 +194,13 @@ static void mlxsw_sp_fib_entry_destroy(struct mlxsw_sp_fib_entry *fib_entry) static struct mlxsw_sp_fib_entry * mlxsw_sp_fib_entry_lookup(struct mlxsw_sp_fib *fib, const void *addr, - size_t addr_len, unsigned char prefix_len) + size_t addr_len, unsigned char prefix_len, + struct net_device *dev) { - struct mlxsw_sp_fib_key key = {{ 0 } }; + struct mlxsw_sp_fib_key key; + memset(&key, 0, sizeof(key)); + key.dev = dev; memcpy(key.addr, addr, addr_len); key.prefix_len = prefix_len; return rhashtable_lookup_fast(&fib->ht, &key, mlxsw_sp_fib_ht_params); @@ -1695,34 +1702,93 @@ mlxsw_sp_router_fib4_entry_fini(struct mlxsw_sp *mlxsw_sp, mlxsw_sp_nexthop_group_put(mlxsw_sp, fib_entry); } -static int -mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, - const struct switchdev_obj_ipv4_fib *fib4, - struct switchdev_trans *trans) +static struct mlxsw_sp_fib_entry * +mlxsw_sp_fib_entry_get(struct mlxsw_sp *mlxsw_sp, + const struct switchdev_obj_ipv4_fib *fib4) { - struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; - struct mlxsw_sp_router_fib4_add_info *info; struct mlxsw_sp_fib_entry *fib_entry; + struct fib_info *fi = fib4->fi; struct mlxsw_sp_vr *vr; int err; vr = mlxsw_sp_vr_get(mlxsw_sp, fib4->dst_len, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); if (IS_ERR(vr)) - return PTR_ERR(vr); + return ERR_CAST(vr); + fib_entry = mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, + sizeof(fib4->dst), + fib4->dst_len, fi->fib_dev); + if (fib_entry) { + /* Already exists, just take a reference */ + fib_entry->ref_count++; + return fib_entry; + } fib_entry = mlxsw_sp_fib_entry_create(vr->fib, &fib4->dst, - sizeof(fib4->dst), fib4->dst_len); + sizeof(fib4->dst), + fib4->dst_len, fi->fib_dev); if (!fib_entry) { err = -ENOMEM; goto err_fib_entry_create; } fib_entry->vr = vr; + fib_entry->ref_count = 1; err = mlxsw_sp_router_fib4_entry_init(mlxsw_sp, fib4, fib_entry); if (err) goto err_fib4_entry_init; + return fib_entry; + +err_fib4_entry_init: + mlxsw_sp_fib_entry_destroy(fib_entry); +err_fib_entry_create: + mlxsw_sp_vr_put(mlxsw_sp, vr); + + return ERR_PTR(err); +} + +static struct mlxsw_sp_fib_entry * +mlxsw_sp_fib_entry_find(struct mlxsw_sp *mlxsw_sp, + const struct switchdev_obj_ipv4_fib *fib4) +{ + struct mlxsw_sp_vr *vr; + + vr = mlxsw_sp_vr_find(mlxsw_sp, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); + if (!vr) + return NULL; + + return mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, + sizeof(fib4->dst), fib4->dst_len, + fib4->fi->fib_dev); +} + +void mlxsw_sp_fib_entry_put(struct mlxsw_sp *mlxsw_sp, + struct mlxsw_sp_fib_entry *fib_entry) +{ + struct mlxsw_sp_vr *vr = fib_entry->vr; + + if (--fib_entry->ref_count == 0) { + mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); + mlxsw_sp_fib_entry_destroy(fib_entry); + } + mlxsw_sp_vr_put(mlxsw_sp, vr); +} + +static int +mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, + const struct switchdev_obj_ipv4_fib *fib4, + struct switchdev_trans *trans) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + struct mlxsw_sp_router_fib4_add_info *info; + struct mlxsw_sp_fib_entry *fib_entry; + int err; + + fib_entry = mlxsw_sp_fib_entry_get(mlxsw_sp, fib4); + if (IS_ERR(fib_entry)) + return PTR_ERR(fib_entry); + info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) { err = -ENOMEM; @@ -1736,11 +1802,7 @@ mlxsw_sp_router_fib4_add_prepare(struct mlxsw_sp_port *mlxsw_sp_port, return 0; err_alloc_info: - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); -err_fib4_entry_init: - mlxsw_sp_fib_entry_destroy(fib_entry); -err_fib_entry_create: - mlxsw_sp_vr_put(mlxsw_sp, vr); + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return err; } @@ -1759,11 +1821,14 @@ mlxsw_sp_router_fib4_add_commit(struct mlxsw_sp_port *mlxsw_sp_port, fib_entry = info->fib_entry; kfree(info); + if (fib_entry->ref_count != 1) + return 0; + vr = fib_entry->vr; - err = mlxsw_sp_fib_entry_insert(fib_entry->vr->fib, fib_entry); + err = mlxsw_sp_fib_entry_insert(vr->fib, fib_entry); if (err) goto err_fib_entry_insert; - err = mlxsw_sp_fib_entry_update(mlxsw_sp, fib_entry); + err = mlxsw_sp_fib_entry_update(mlxsw_sp_port->mlxsw_sp, fib_entry); if (err) goto err_fib_entry_add; return 0; @@ -1771,9 +1836,7 @@ mlxsw_sp_router_fib4_add_commit(struct mlxsw_sp_port *mlxsw_sp_port, err_fib_entry_add: mlxsw_sp_fib_entry_remove(vr->fib, fib_entry); err_fib_entry_insert: - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_destroy(fib_entry); - mlxsw_sp_vr_put(mlxsw_sp, vr); + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return err; } @@ -1793,23 +1856,18 @@ int mlxsw_sp_router_fib4_del(struct mlxsw_sp_port *mlxsw_sp_port, { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_fib_entry *fib_entry; - struct mlxsw_sp_vr *vr; - vr = mlxsw_sp_vr_find(mlxsw_sp, fib4->tb_id, MLXSW_SP_L3_PROTO_IPV4); - if (!vr) { - dev_warn(mlxsw_sp->bus_info->dev, "Failed to find virtual router for FIB4 entry being removed.\n"); - return -ENOENT; - } - fib_entry = mlxsw_sp_fib_entry_lookup(vr->fib, &fib4->dst, - sizeof(fib4->dst), fib4->dst_len); + fib_entry = mlxsw_sp_fib_entry_find(mlxsw_sp, fib4); if (!fib_entry) { dev_warn(mlxsw_sp->bus_info->dev, "Failed to find FIB4 entry being removed.\n"); return -ENOENT; } - mlxsw_sp_fib_entry_del(mlxsw_sp_port->mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_remove(vr->fib, fib_entry); - mlxsw_sp_router_fib4_entry_fini(mlxsw_sp, fib_entry); - mlxsw_sp_fib_entry_destroy(fib_entry); - mlxsw_sp_vr_put(mlxsw_sp, vr); + + if (fib_entry->ref_count == 1) { + mlxsw_sp_fib_entry_del(mlxsw_sp, fib_entry); + mlxsw_sp_fib_entry_remove(fib_entry->vr->fib, fib_entry); + } + + mlxsw_sp_fib_entry_put(mlxsw_sp, fib_entry); return 0; } -- cgit v1.3-18-gd494 From 7146da31817aa21b19d7a01e95b94686c3f4bd97 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:41 +0200 Subject: mlxsw: spectrum_router: Fix fib entry update path Originally, I expected that there would be needed to call update operation in case RALUE record action is changed. However, that is not needed since write operation takes care of that nicely. Remove prepared construct and always call the write operation. Fixes: 61c503f976b5 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index ed618144fed4..49f4e06e5842 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -125,7 +125,6 @@ struct mlxsw_sp_fib_entry { struct mlxsw_sp_fib_key key; enum mlxsw_sp_fib_entry_type type; unsigned int ref_count; - u8 added:1; u16 rif; /* used for action local */ struct mlxsw_sp_vr *vr; struct list_head nexthop_group_node; @@ -1633,11 +1632,8 @@ static int mlxsw_sp_fib_entry_op(struct mlxsw_sp *mlxsw_sp, static int mlxsw_sp_fib_entry_update(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fib_entry *fib_entry) { - enum mlxsw_reg_ralue_op op; - - op = !fib_entry->added ? MLXSW_REG_RALUE_OP_WRITE_WRITE : - MLXSW_REG_RALUE_OP_WRITE_UPDATE; - return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry, op); + return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry, + MLXSW_REG_RALUE_OP_WRITE_WRITE); } static int mlxsw_sp_fib_entry_del(struct mlxsw_sp *mlxsw_sp, -- cgit v1.3-18-gd494 From de7d62952b01755f9885bbe945b141d9d4338e55 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:42 +0200 Subject: mlxsw: spectrum: Fix error path in mlxsw_sp_module_init Add forgotten notifier unregister. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 7291f2c4b0c7..ec1f7d88948f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -4553,6 +4553,7 @@ static int __init mlxsw_sp_module_init(void) return 0; err_core_driver_register: + unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); return err; } -- cgit v1.3-18-gd494 From e73226384948e9b35823150cadd9a3ea4ca9fc97 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 1 Sep 2016 10:37:43 +0200 Subject: mlxsw: spectrum_router: Fix netevent notifier registration Currently the notifier is registered for every asic instance, however the same block. Fix this by moving the registration to module init. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 9 +++++++++ drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 2 ++ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 17 ++--------------- 3 files changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index ec1f7d88948f..e16b34718c8c 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -56,6 +56,7 @@ #include #include #include +#include #include "spectrum.h" #include "core.h" @@ -4541,18 +4542,25 @@ static struct notifier_block mlxsw_sp_inetaddr_nb __read_mostly = { .priority = 10, /* Must be called before FIB notifier block */ }; +static struct notifier_block mlxsw_sp_router_netevent_nb __read_mostly = { + .notifier_call = mlxsw_sp_router_netevent_event, +}; + static int __init mlxsw_sp_module_init(void) { int err; register_netdevice_notifier(&mlxsw_sp_netdevice_nb); register_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); + register_netevent_notifier(&mlxsw_sp_router_netevent_nb); + err = mlxsw_core_driver_register(&mlxsw_sp_driver); if (err) goto err_core_driver_register; return 0; err_core_driver_register: + unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); return err; @@ -4561,6 +4569,7 @@ err_core_driver_register: static void __exit mlxsw_sp_module_exit(void) { mlxsw_core_driver_unregister(&mlxsw_sp_driver); + unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); unregister_inetaddr_notifier(&mlxsw_sp_inetaddr_nb); unregister_netdevice_notifier(&mlxsw_sp_netdevice_nb); } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index ab3feb81bd43..ac48abebe904 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -587,6 +587,8 @@ int mlxsw_sp_router_neigh_construct(struct net_device *dev, struct neighbour *n); void mlxsw_sp_router_neigh_destroy(struct net_device *dev, struct neighbour *n); +int mlxsw_sp_router_netevent_event(struct notifier_block *unused, + unsigned long event, void *ptr); int mlxsw_sp_kvdl_alloc(struct mlxsw_sp *mlxsw_sp, unsigned int entry_count); void mlxsw_sp_kvdl_free(struct mlxsw_sp *mlxsw_sp, int entry_index); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 49f4e06e5842..352259b3c38a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -944,8 +944,8 @@ static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work) mlxsw_sp_port_dev_put(mlxsw_sp_port); } -static int mlxsw_sp_router_netevent_event(struct notifier_block *unused, - unsigned long event, void *ptr) +int mlxsw_sp_router_netevent_event(struct notifier_block *unused, + unsigned long event, void *ptr) { struct mlxsw_sp_neigh_entry *neigh_entry; struct mlxsw_sp_port *mlxsw_sp_port; @@ -1015,10 +1015,6 @@ static int mlxsw_sp_router_netevent_event(struct notifier_block *unused, return NOTIFY_DONE; } -static struct notifier_block mlxsw_sp_router_netevent_nb __read_mostly = { - .notifier_call = mlxsw_sp_router_netevent_event, -}; - static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) { int err; @@ -1033,10 +1029,6 @@ static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) */ mlxsw_sp_router_neighs_update_interval_init(mlxsw_sp); - err = register_netevent_notifier(&mlxsw_sp_router_netevent_nb); - if (err) - goto err_register_netevent_notifier; - /* Create the delayed works for the activity_update */ INIT_DELAYED_WORK(&mlxsw_sp->router.neighs_update.dw, mlxsw_sp_router_neighs_update_work); @@ -1045,17 +1037,12 @@ static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp) mlxsw_core_schedule_dw(&mlxsw_sp->router.neighs_update.dw, 0); mlxsw_core_schedule_dw(&mlxsw_sp->router.nexthop_probe_dw, 0); return 0; - -err_register_netevent_notifier: - rhashtable_destroy(&mlxsw_sp->router.neigh_ht); - return err; } static void mlxsw_sp_neigh_fini(struct mlxsw_sp *mlxsw_sp) { cancel_delayed_work_sync(&mlxsw_sp->router.neighs_update.dw); cancel_delayed_work_sync(&mlxsw_sp->router.nexthop_probe_dw); - unregister_netevent_notifier(&mlxsw_sp_router_netevent_nb); rhashtable_destroy(&mlxsw_sp->router.neigh_ht); } -- cgit v1.3-18-gd494 From f1de7a28d53cfde8fa290d6c535eb690a4e1b5d5 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 1 Sep 2016 10:37:44 +0200 Subject: mlxsw: spectrum: Don't take multiple references on a FID In commit 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") I added a per-FID struct, which member ports can take a reference on upon VLAN membership configuration. However, sometimes only the VLAN flags (e.g. egress untagged) are toggled without changing the VLAN membership. In these cases we shouldn't take another reference on the FID. Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index d1b59cdfacc1..e0d95c419634 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -460,6 +460,9 @@ static int __mlxsw_sp_port_fid_join(struct mlxsw_sp_port *mlxsw_sp_port, { struct mlxsw_sp_fid *f; + if (test_bit(fid, mlxsw_sp_port->active_vlans)) + return 0; + f = mlxsw_sp_fid_find(mlxsw_sp_port->mlxsw_sp, fid); if (!f) { f = mlxsw_sp_fid_create(mlxsw_sp_port->mlxsw_sp, fid); -- cgit v1.3-18-gd494 From aad8b6bae7c63fcf860c4c7ce693cb8ac5d4a511 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 1 Sep 2016 10:37:45 +0200 Subject: mlxsw: spectrum: Use existing flood setup when adding VLANs When a VLAN is added on a bridge port we should use the existing unicast flood configuration of the port instead of assuming it's enabled. Fixes: 0293038e0c36 ("mlxsw: spectrum: Add support for flood control") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 25 ++++++++-------------- 1 file changed, 9 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index e0d95c419634..7b654c517b91 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -167,8 +167,8 @@ static int mlxsw_sp_port_attr_stp_state_set(struct mlxsw_sp_port *mlxsw_sp_port, } static int __mlxsw_sp_port_flood_set(struct mlxsw_sp_port *mlxsw_sp_port, - u16 idx_begin, u16 idx_end, bool set, - bool only_uc) + u16 idx_begin, u16 idx_end, bool uc_set, + bool bm_set) { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; u16 local_port = mlxsw_sp_port->local_port; @@ -187,28 +187,22 @@ static int __mlxsw_sp_port_flood_set(struct mlxsw_sp_port *mlxsw_sp_port, return -ENOMEM; mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_UC, idx_begin, - table_type, range, local_port, set); + table_type, range, local_port, uc_set); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); if (err) goto buffer_out; - /* Flooding control allows one to decide whether a given port will - * flood unicast traffic for which there is no FDB entry. - */ - if (only_uc) - goto buffer_out; - mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_BM, idx_begin, - table_type, range, local_port, set); + table_type, range, local_port, bm_set); err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); if (err) goto err_flood_bm_set; - else - goto buffer_out; + + goto buffer_out; err_flood_bm_set: mlxsw_reg_sftr_pack(sftr_pl, MLXSW_SP_FLOOD_TABLE_UC, idx_begin, - table_type, range, local_port, !set); + table_type, range, local_port, !uc_set); mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sftr), sftr_pl); buffer_out: kfree(sftr_pl); @@ -257,8 +251,7 @@ int mlxsw_sp_vport_flood_set(struct mlxsw_sp_port *mlxsw_sp_vport, u16 fid, * the start of the vFIDs range. */ vfid = mlxsw_sp_fid_to_vfid(fid); - return __mlxsw_sp_port_flood_set(mlxsw_sp_vport, vfid, vfid, set, - false); + return __mlxsw_sp_port_flood_set(mlxsw_sp_vport, vfid, vfid, set, set); } static int mlxsw_sp_port_attr_br_flags_set(struct mlxsw_sp_port *mlxsw_sp_port, @@ -520,7 +513,7 @@ static int mlxsw_sp_port_fid_join(struct mlxsw_sp_port *mlxsw_sp_port, } err = __mlxsw_sp_port_flood_set(mlxsw_sp_port, fid_begin, fid_end, - true, false); + mlxsw_sp_port->uc_flood, true); if (err) goto err_port_flood_set; -- cgit v1.3-18-gd494 From 561ed23331dfefea4c8eec616463ee4d0c8fa4b7 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Thu, 1 Sep 2016 14:45:12 +0800 Subject: qed: fix kzalloc-simple.cocci warnings drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1230:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1192:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset Use kzalloc rather than kmalloc followed by memset with 0 This considers some simple cases that are common and easy to validate Note in particular that there are no ...s in the rule, so all of the matched code has to be contiguous Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci CC: Sudarsana Reddy Kalluru Signed-off-by: Fengguang Wu Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_dcbx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c index ad023fe7d156..3656d2fd673d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dcbx.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dcbx.c @@ -1189,13 +1189,12 @@ int qed_dcbx_get_config_params(struct qed_hwfn *p_hwfn, return 0; } - dcbx_info = kmalloc(sizeof(*dcbx_info), GFP_KERNEL); + dcbx_info = kzalloc(sizeof(*dcbx_info), GFP_KERNEL); if (!dcbx_info) { DP_ERR(p_hwfn, "Failed to allocate struct qed_dcbx_info\n"); return -ENOMEM; } - memset(dcbx_info, 0, sizeof(*dcbx_info)); rc = qed_dcbx_query_params(p_hwfn, dcbx_info, QED_DCBX_OPERATIONAL_MIB); if (rc) { kfree(dcbx_info); @@ -1227,13 +1226,12 @@ static struct qed_dcbx_get *qed_dcbnl_get_dcbx(struct qed_hwfn *hwfn, { struct qed_dcbx_get *dcbx_info; - dcbx_info = kmalloc(sizeof(*dcbx_info), GFP_KERNEL); + dcbx_info = kzalloc(sizeof(*dcbx_info), GFP_KERNEL); if (!dcbx_info) { DP_ERR(hwfn->cdev, "Failed to allocate memory for dcbx_info\n"); return NULL; } - memset(dcbx_info, 0, sizeof(*dcbx_info)); if (qed_dcbx_query_params(hwfn, dcbx_info, type)) { kfree(dcbx_info); return NULL; -- cgit v1.3-18-gd494 From aabdd09d535073c35f746e46c3a5d3286088be3a Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 1 Sep 2016 11:28:59 +0200 Subject: tg3: Fix for disallow tx coalescing time to be 0 The recent commit 087d7a8c9174 "tg3: Fix for diasllow rx coalescing time to be 0" disallow to set Rx coalescing time to be 0 as this stops generating interrupts for the incoming packets. I found the zero Tx coalescing time stops generating interrupts for outgoing packets as well and fires Tx watchdog later. To avoid this, don't allow to set Tx coalescing time to 0 and also remove subsequent checks that become senseless. Cc: satish.baddipadige@broadcom.com Cc: siva.kallam@broadcom.com Cc: michael.chan@broadcom.com Signed-off-by: Ivan Vecera Acked-by: Siva Reddy Kallam Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 659261218d9f..a2551bcd1027 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -14012,6 +14012,7 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) if ((ec->rx_coalesce_usecs > MAX_RXCOL_TICKS) || (!ec->rx_coalesce_usecs) || (ec->tx_coalesce_usecs > MAX_TXCOL_TICKS) || + (!ec->tx_coalesce_usecs) || (ec->rx_max_coalesced_frames > MAX_RXMAX_FRAMES) || (ec->tx_max_coalesced_frames > MAX_TXMAX_FRAMES) || (ec->rx_coalesce_usecs_irq > max_rxcoal_tick_int) || @@ -14022,16 +14023,6 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) (ec->stats_block_coalesce_usecs < min_stat_coal_ticks)) return -EINVAL; - /* No rx interrupts will be generated if both are zero */ - if ((ec->rx_coalesce_usecs == 0) && - (ec->rx_max_coalesced_frames == 0)) - return -EINVAL; - - /* No tx interrupts will be generated if both are zero */ - if ((ec->tx_coalesce_usecs == 0) && - (ec->tx_max_coalesced_frames == 0)) - return -EINVAL; - /* Only copy relevant parameters, ignore all others. */ tp->coal.rx_coalesce_usecs = ec->rx_coalesce_usecs; tp->coal.tx_coalesce_usecs = ec->tx_coalesce_usecs; -- cgit v1.3-18-gd494 From a036244c068612a43fa8c0f33a0eb4daa4d8dba0 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Mon, 29 Aug 2016 17:38:26 -0700 Subject: i40e: Fix kernel panic on enable/disable LLDP If DCB is configured on the link partner switch with an unsupported traffic class configuration (e.g. non-contiguous TCs), the driver is flagging DCB as disabled. But, for future DCB LLDPDUs, the driver was checking if the interface was DCB capable instead of enabled. This was causing a kernel panic when LLDP was enabled/disabled on the link partner switch. This patch corrects the situation by having the LLDP event handler check the correct flag in the pf structure. It also cleans up the setting and clearing of the enabled flag for other checks. Signed-off-by: Dave Ertman Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 828ed28c3c14..d0b3a1bb82ca 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5113,9 +5113,13 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf) DCB_CAP_DCBX_VER_IEEE; pf->flags |= I40E_FLAG_DCB_CAPABLE; - /* Enable DCB tagging only when more than one TC */ + /* Enable DCB tagging only when more than one TC + * or explicitly disable if only one TC + */ if (i40e_dcb_get_num_tc(&hw->local_dcbx_config) > 1) pf->flags |= I40E_FLAG_DCB_ENABLED; + else + pf->flags &= ~I40E_FLAG_DCB_ENABLED; dev_dbg(&pf->pdev->dev, "DCBX offload is supported for this PF.\n"); } @@ -5716,7 +5720,7 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf, u8 type; /* Not DCB capable or capability disabled */ - if (!(pf->flags & I40E_FLAG_DCB_CAPABLE)) + if (!(pf->flags & I40E_FLAG_DCB_ENABLED)) return ret; /* Ignore if event is not for Nearest Bridge */ @@ -7896,6 +7900,7 @@ static int i40e_init_interrupt_scheme(struct i40e_pf *pf) #endif I40E_FLAG_RSS_ENABLED | I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED | I40E_FLAG_SRIOV_ENABLED | I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED | @@ -10502,6 +10507,7 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf) I40E_FLAG_FD_SB_ENABLED | I40E_FLAG_FD_ATR_ENABLED | I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED | I40E_FLAG_SRIOV_ENABLED | I40E_FLAG_VMDQ_ENABLED); } else if (!(pf->flags & (I40E_FLAG_RSS_ENABLED | @@ -10525,7 +10531,8 @@ static void i40e_determine_queue_usage(struct i40e_pf *pf) /* Not enough queues for all TCs */ if ((pf->flags & I40E_FLAG_DCB_CAPABLE) && (queues_left < I40E_MAX_TRAFFIC_CLASS)) { - pf->flags &= ~I40E_FLAG_DCB_CAPABLE; + pf->flags &= ~(I40E_FLAG_DCB_CAPABLE | + I40E_FLAG_DCB_ENABLED); dev_info(&pf->pdev->dev, "not enough queues for DCB. DCB is disabled.\n"); } pf->num_lan_qps = max_t(int, pf->rss_size_max, @@ -10922,7 +10929,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = i40e_init_pf_dcb(pf); if (err) { dev_info(&pdev->dev, "DCB init failed %d, disabled\n", err); - pf->flags &= ~I40E_FLAG_DCB_CAPABLE; + pf->flags &= ~(I40E_FLAG_DCB_CAPABLE & I40E_FLAG_DCB_ENABLED); /* Continue without DCB enabled */ } #endif /* CONFIG_I40E_DCB */ -- cgit v1.3-18-gd494 From 57e81d44b0e1aa4dcb479ff8de8fc34cf635d0e8 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 30 Aug 2016 11:36:26 +0530 Subject: net: thunderx: Fix for HW issue while padding TSO packet There is a issue in HW where-in while sending GSO sized pkts as part of TSO, if pkt len falls below configured min packet size i.e 60, NIC will zero PAD packet and also updates IP total length. Hence set this value to lessthan min pkt size of MAC + IP + TCP headers, BGX will anyway do the padding to transmit 64 byte pkt including FCS. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic_main.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 16ed20357c5c..85cc782b9060 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -251,9 +251,14 @@ static void nic_set_tx_pkt_pad(struct nicpf *nic, int size) int lmac; u64 lmac_cfg; - /* Max value that can be set is 60 */ - if (size > 60) - size = 60; + /* There is a issue in HW where-in while sending GSO sized + * pkts as part of TSO, if pkt len falls below this size + * NIC will zero PAD packet and also updates IP total length. + * Hence set this value to lessthan min pkt size of MAC+IP+TCP + * headers, BGX will do the padding to transmit 64 byte pkt. + */ + if (size > 52) + size = 52; for (lmac = 0; lmac < (MAX_BGX_PER_CN88XX * MAX_LMAC_PER_BGX); lmac++) { lmac_cfg = nic_reg_read(nic, NIC_PF_LMAC_0_7_CFG | (lmac << 3)); -- cgit v1.3-18-gd494 From 7ceb8a1319ec64954459d474dd4a8c3c60ff0999 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 30 Aug 2016 11:36:27 +0530 Subject: net: thunderx: Fix for issues with multiple CQEs posted for a TSO packet On ThunderX 88xx pass 2.x chips when TSO is offloaded to HW, HW posts a CQE for every TSO segment transmitted. Current code does handles this, but is prone to issues when segment sizes are small resulting in SW processing too many CQEs and also at times frees a SKB which is not yet transmitted. This patch handles the errata in a different way and eliminates issues with earlier approach, TSO packet is submitted to HW with post_cqe=0, so that no CQE is posted upon completion of transmission of TSO packet but a additional HDR + IMMEDIATE descriptors are added to SQ due to which a CQE is posted and will have required info to be used while cleanup in napi. This way only one CQE is posted for a TSO packet. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic.h | 1 + drivers/net/ethernet/cavium/thunder/nicvf_main.c | 20 +++++-- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 64 +++++++++++++++++++--- 3 files changed, 73 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index 83025bb4737c..e29815d9e6f4 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -279,6 +279,7 @@ struct nicvf { u8 sqs_id; bool sqs_mode; bool hw_tso; + bool t88; /* Receive buffer alloc */ u32 rb_page_offset; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index a19e73f11d73..3240349615bd 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -513,6 +513,7 @@ static void nicvf_snd_pkt_handler(struct net_device *netdev, struct nicvf *nic = netdev_priv(netdev); struct snd_queue *sq; struct sq_hdr_subdesc *hdr; + struct sq_hdr_subdesc *tso_sqe; sq = &nic->qs->sq[cqe_tx->sq_idx]; @@ -527,17 +528,21 @@ static void nicvf_snd_pkt_handler(struct net_device *netdev, nicvf_check_cqe_tx_errs(nic, cq, cqe_tx); skb = (struct sk_buff *)sq->skbuff[cqe_tx->sqe_ptr]; - /* For TSO offloaded packets only one SQE will have a valid SKB */ if (skb) { + /* Check for dummy descriptor used for HW TSO offload on 88xx */ + if (hdr->dont_send) { + /* Get actual TSO descriptors and free them */ + tso_sqe = + (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, hdr->rsvd2); + nicvf_put_sq_desc(sq, tso_sqe->subdesc_cnt + 1); + } nicvf_put_sq_desc(sq, hdr->subdesc_cnt + 1); prefetch(skb); dev_consume_skb_any(skb); sq->skbuff[cqe_tx->sqe_ptr] = (u64)NULL; } else { - /* In case of HW TSO, HW sends a CQE for each segment of a TSO - * packet instead of a single CQE for the whole TSO packet - * transmitted. Each of this CQE points to the same SQE, so - * avoid freeing same SQE multiple times. + /* In case of SW TSO on 88xx, only last segment will have + * a SKB attached, so just free SQEs here. */ if (!nic->hw_tso) nicvf_put_sq_desc(sq, hdr->subdesc_cnt + 1); @@ -1502,6 +1507,7 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct net_device *netdev; struct nicvf *nic; int err, qcount; + u16 sdevid; err = pci_enable_device(pdev); if (err) { @@ -1575,6 +1581,10 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (!pass1_silicon(nic->pdev)) nic->hw_tso = true; + pci_read_config_word(nic->pdev, PCI_SUBSYSTEM_ID, &sdevid); + if (sdevid == 0xA134) + nic->t88 = true; + /* Check if this VF is in QS only mode */ if (nic->sqs_mode) return 0; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index 0ff8e60deccb..dda3ea3f3bb6 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -938,6 +938,8 @@ static int nicvf_tso_count_subdescs(struct sk_buff *skb) return num_edescs + sh->gso_segs; } +#define POST_CQE_DESC_COUNT 2 + /* Get the number of SQ descriptors needed to xmit this skb */ static int nicvf_sq_subdesc_required(struct nicvf *nic, struct sk_buff *skb) { @@ -948,6 +950,10 @@ static int nicvf_sq_subdesc_required(struct nicvf *nic, struct sk_buff *skb) return subdesc_cnt; } + /* Dummy descriptors to get TSO pkt completion notification */ + if (nic->t88 && nic->hw_tso && skb_shinfo(skb)->gso_size) + subdesc_cnt += POST_CQE_DESC_COUNT; + if (skb_shinfo(skb)->nr_frags) subdesc_cnt += skb_shinfo(skb)->nr_frags; @@ -965,14 +971,21 @@ nicvf_sq_add_hdr_subdesc(struct nicvf *nic, struct snd_queue *sq, int qentry, struct sq_hdr_subdesc *hdr; hdr = (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, qentry); - sq->skbuff[qentry] = (u64)skb; - memset(hdr, 0, SND_QUEUE_DESC_SIZE); hdr->subdesc_type = SQ_DESC_TYPE_HEADER; - /* Enable notification via CQE after processing SQE */ - hdr->post_cqe = 1; - /* No of subdescriptors following this */ - hdr->subdesc_cnt = subdesc_cnt; + + if (nic->t88 && nic->hw_tso && skb_shinfo(skb)->gso_size) { + /* post_cqe = 0, to avoid HW posting a CQE for every TSO + * segment transmitted on 88xx. + */ + hdr->subdesc_cnt = subdesc_cnt - POST_CQE_DESC_COUNT; + } else { + sq->skbuff[qentry] = (u64)skb; + /* Enable notification via CQE after processing SQE */ + hdr->post_cqe = 1; + /* No of subdescriptors following this */ + hdr->subdesc_cnt = subdesc_cnt; + } hdr->tot_len = len; /* Offload checksum calculation to HW */ @@ -1023,6 +1036,37 @@ static inline void nicvf_sq_add_gather_subdesc(struct snd_queue *sq, int qentry, gather->addr = data; } +/* Add HDR + IMMEDIATE subdescriptors right after descriptors of a TSO + * packet so that a CQE is posted as a notifation for transmission of + * TSO packet. + */ +static inline void nicvf_sq_add_cqe_subdesc(struct snd_queue *sq, int qentry, + int tso_sqe, struct sk_buff *skb) +{ + struct sq_imm_subdesc *imm; + struct sq_hdr_subdesc *hdr; + + sq->skbuff[qentry] = (u64)skb; + + hdr = (struct sq_hdr_subdesc *)GET_SQ_DESC(sq, qentry); + memset(hdr, 0, SND_QUEUE_DESC_SIZE); + hdr->subdesc_type = SQ_DESC_TYPE_HEADER; + /* Enable notification via CQE after processing SQE */ + hdr->post_cqe = 1; + /* There is no packet to transmit here */ + hdr->dont_send = 1; + hdr->subdesc_cnt = POST_CQE_DESC_COUNT - 1; + hdr->tot_len = 1; + /* Actual TSO header SQE index, needed for cleanup */ + hdr->rsvd2 = tso_sqe; + + qentry = nicvf_get_nxt_sqentry(sq, qentry); + imm = (struct sq_imm_subdesc *)GET_SQ_DESC(sq, qentry); + memset(imm, 0, SND_QUEUE_DESC_SIZE); + imm->subdesc_type = SQ_DESC_TYPE_IMMEDIATE; + imm->len = 1; +} + /* Segment a TSO packet into 'gso_size' segments and append * them to SQ for transfer */ @@ -1096,7 +1140,7 @@ static int nicvf_sq_append_tso(struct nicvf *nic, struct snd_queue *sq, int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) { int i, size; - int subdesc_cnt; + int subdesc_cnt, tso_sqe = 0; int sq_num, qentry; struct queue_set *qs; struct snd_queue *sq; @@ -1131,6 +1175,7 @@ int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) /* Add SQ header subdesc */ nicvf_sq_add_hdr_subdesc(nic, sq, qentry, subdesc_cnt - 1, skb, skb->len); + tso_sqe = qentry; /* Add SQ gather subdescs */ qentry = nicvf_get_nxt_sqentry(sq, qentry); @@ -1154,6 +1199,11 @@ int nicvf_sq_append_skb(struct nicvf *nic, struct sk_buff *skb) } doorbell: + if (nic->t88 && skb_shinfo(skb)->gso_size) { + qentry = nicvf_get_nxt_sqentry(sq, qentry); + nicvf_sq_add_cqe_subdesc(sq, qentry, tso_sqe, skb); + } + /* make sure all memory stores are done before ringing doorbell */ smp_wmb(); -- cgit v1.3-18-gd494 From 8a793bea2745d9876030f892a84fc8be180f2e78 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 1 Sep 2016 16:14:58 -0700 Subject: drivers/scsi/wd719x.c: remove last declaration using DEFINE_PCI_DEVICE_TABLE Convert it to the preferred const struct pci_device_id instead. Link: http://lkml.kernel.org/r/95c5e4100c3cd4eda643624f5b70e8d7abceb86c.1472660229.git.joe@perches.com Signed-off-by: Joe Perches Reviewed-by: Bart Van Assche Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/wd719x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/wd719x.c b/drivers/scsi/wd719x.c index e3da1a2fdb66..2a9da2e0ea6b 100644 --- a/drivers/scsi/wd719x.c +++ b/drivers/scsi/wd719x.c @@ -962,7 +962,7 @@ static void wd719x_pci_remove(struct pci_dev *pdev) scsi_host_put(sh); } -static DEFINE_PCI_DEVICE_TABLE(wd719x_pci_table) = { +static const struct pci_device_id wd719x_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_WD, 0x3296) }, {} }; -- cgit v1.3-18-gd494 From b30069291dc7f9b9a073c33d619818fe4a8e50de Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 1 Sep 2016 16:15:18 -0700 Subject: rapidio/tsi721: fix incorrect detection of address translation condition Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Andre van Herk Cc: Barry Wood Cc: [4.6+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 32f0f014a067..9d19b9a62011 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -1161,7 +1161,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, } else if (ibw_start < (ib_win->rstart + ib_win->size) && (ibw_start + ibw_size) > ib_win->rstart) { /* Return error if address translation involved */ - if (direct && ib_win->xlat) { + if (!direct || ib_win->xlat) { ret = -EFAULT; break; } -- cgit v1.3-18-gd494 From b44e108b6f322eb5f20aa6eba39b468a1ffc10ff Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Wed, 31 Aug 2016 12:11:57 -0300 Subject: bnx2x: don't reset chip on cleanup if PCI function is offline When PCI error is detected, in some architectures (like PowerPC) a slot reset is performed - the driver's error handlers are in charge of "disable" device before the reset, and re-enable it after a successful slot reset. There are two cases though that another path is taken on the code: if the slot reset is not successful or if too many errors already happened in the specific adapter (meaning that possibly the device is experiencing a HW failure that slot reset is not able to solve), the core PCI error mechanism (called EEH in PowerPC) will remove the adapter from the system, since it will consider this as a permanent failure on device. In this case, a path is taken that leads to bnx2x_chip_cleanup() calling bnx2x_reset_hw(), which then tries to perform a HW reset on chip. This reset won't succeed since the HW is in a fault state, which can be seen by multiple messages on kernel log like below: bnx2x: [bnx2x_issue_dmae_with_comp:552(eth1)]DMAE timeout! bnx2x: [bnx2x_write_dmae:600(eth1)]DMAE returned failure -1 After some time, the PCI error mechanism gives up on waiting the driver's correct removal procedure and forcibly remove the adapter from the system. We can see soft lockup while core PCI error mechanism is waiting for driver to accomplish the right removal process. This patch adds a verification to avoid a chip reset whenever the function is in PCI error state - since this case is only reached when we have a device being removed because of a permanent failure, the HW chip reset is not expected to work fine neither is necessary. Also, as a minor improvement in error path, we avoid the MCP information dump in case of non-recoverable PCI error (when adapter is about to be removed), since it will certainly fail. Reported-by: Harsha Thyagaraja Signed-off-by: Guilherme G. Piccoli Acked-By: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 97e892511666..fa3386bb14f7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -772,6 +772,11 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl) (bp->common.bc_ver & 0xff00) >> 8, (bp->common.bc_ver & 0xff)); + if (pci_channel_offline(bp->pdev)) { + BNX2X_ERR("Cannot dump MCP info while in PCI error\n"); + return; + } + val = REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER); if (val == REG_RD(bp, MCP_REG_MCPR_CPU_PROGRAM_COUNTER)) BNX2X_ERR("%s" "MCP PC at 0x%x\n", lvl, val); @@ -9415,10 +9420,16 @@ unload_error: /* Release IRQs */ bnx2x_free_irq(bp); - /* Reset the chip */ - rc = bnx2x_reset_hw(bp, reset_code); - if (rc) - BNX2X_ERR("HW_RESET failed\n"); + /* Reset the chip, unless PCI function is offline. If we reach this + * point following a PCI error handling, it means device is really + * in a bad state and we're about to remove it, so reset the chip + * is not a good idea. + */ + if (!pci_channel_offline(bp->pdev)) { + rc = bnx2x_reset_hw(bp, reset_code); + if (rc) + BNX2X_ERR("HW_RESET failed\n"); + } /* Report UNLOAD_DONE to MCP */ bnx2x_send_unload_done(bp, keep_link); -- cgit v1.3-18-gd494 From 753246840d012ae34ea80a1d40bc1546c62fb957 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 27 Aug 2016 16:19:49 +0000 Subject: drivers/perf: arm_pmu: Fix leak in error path In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by: Stefan Wahren Fixes: fa8ad7889d83 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- drivers/perf/arm_pmu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index c494613c1909..1b48bf0a6780 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -925,6 +925,7 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) if (i > 0 && spi != using_spi) { pr_err("PPI/SPI IRQ type mismatch for %s!\n", dn->name); + of_node_put(dn); kfree(irqs); return -EINVAL; } -- cgit v1.3-18-gd494 From 63fb0a9516b2c4e23293d7253c14c40aa9c2b7d1 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 27 Aug 2016 16:19:50 +0000 Subject: drivers/perf: arm_pmu: Fix NULL pointer dereference during probe Patch 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking interrupt-affinity property") unintended also fixes perf_event support for bcm2835 which doesn't have PMU interrupts. Unfortunately this change introduce a NULL pointer dereference on bcm2835, because irq_is_percpu always expected to be called with a valid IRQ. So fix this regression by validating the IRQ before. Tested-by: Kevin Hilman Signed-off-by: Stefan Wahren Fixes: 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property") Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- drivers/perf/arm_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index 1b48bf0a6780..f5e1008a223d 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -970,7 +970,7 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) if (cpumask_weight(&pmu->supported_cpus) == 0) { int irq = platform_get_irq(pdev, 0); - if (irq_is_percpu(irq)) { + if (irq >= 0 && irq_is_percpu(irq)) { /* If using PPIs, check the affinity of the partition */ int ret; -- cgit v1.3-18-gd494 From db7b542e4a789156a4fb61278f2074795fe2eb9c Mon Sep 17 00:00:00 2001 From: Miaoqing Pan Date: Thu, 4 Aug 2016 15:48:34 +0800 Subject: ath9k: fix AR5416 access GPIO warning The warning was seen on AR5416 chip, which invoke ath9k_hw_gio_get() before the GPIO initialized correctly. WARNING: CPU: 1 PID: 1159 at ~/drivers/net/wireless/ath/ath9k/hw.c:2776 ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw] ... CPU: 1 PID: 1159 Comm: systemd-udevd Not tainted 4.7.0-rc7-aptosid-amd64 #1 aptosid 4.7~rc7-1~git92.slh.3 Hardware name: /DH67CL, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012 0000000000000286 00000000f912d633 ffffffff81290fd3 0000000000000000 0000000000000000 ffffffff81063fd4 ffff88040c6dc018 0000000000000000 0000000000000002 0000000000000000 0000000000000100 ffff88040c6dc018 Call Trace: [] ? dump_stack+0x5c/0x79 [] ? __warn+0xb4/0xd0 [] ? ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw] Signed-off-by: Miaoqing Pan Reported-by: Stefan Lippers-Hollmann Tested-by: Stefan Lippers-Hollmann Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index d1d0c06d627c..14b13f07cd1f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2482,6 +2482,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) return -EINVAL; } + ath9k_gpio_cap_init(ah); + if (AR_SREV_9485(ah) || AR_SREV_9285(ah) || AR_SREV_9330(ah) || @@ -2531,8 +2533,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) else pCap->hw_caps &= ~ATH9K_HW_CAP_HT; - ath9k_gpio_cap_init(ah); - if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX; else -- cgit v1.3-18-gd494 From fffd68734dc685e208e86d8c5f6522cd695a8d60 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Fri, 26 Aug 2016 07:16:17 +0200 Subject: IB/mlx5: Fix the size parameter to find_first_bit The 2nd parameter of 'find_first_bit' is the number of bits to search. In this case, we are passing 'sizeof(tmp)' which is likely to be 4 or 8 because 'tmp' is an 'unsigned long'. It is likely that the number of bits of 'tmp' was expected here. So use BITS_PER_LONG instead. It has been spotted by the following coccinelle script: @@ expression ret, x; @@ * ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...)); Signed-off-by: Christophe JAILLET Acked-by: Majd Dibbiny Acked-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/mem.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mem.c b/drivers/infiniband/hw/mlx5/mem.c index 40df2cca0609..996b54e366b0 100644 --- a/drivers/infiniband/hw/mlx5/mem.c +++ b/drivers/infiniband/hw/mlx5/mem.c @@ -71,7 +71,7 @@ void mlx5_ib_cont_pages(struct ib_umem *umem, u64 addr, int *count, int *shift, addr = addr >> page_shift; tmp = (unsigned long)addr; - m = find_first_bit(&tmp, sizeof(tmp)); + m = find_first_bit(&tmp, BITS_PER_LONG); skip = 1 << m; mask = skip - 1; i = 0; @@ -81,7 +81,7 @@ void mlx5_ib_cont_pages(struct ib_umem *umem, u64 addr, int *count, int *shift, for (k = 0; k < len; k++) { if (!(i & mask)) { tmp = (unsigned long)pfn; - m = min_t(unsigned long, m, find_first_bit(&tmp, sizeof(tmp))); + m = min_t(unsigned long, m, find_first_bit(&tmp, BITS_PER_LONG)); skip = 1 << m; mask = skip - 1; base = pfn; @@ -89,7 +89,7 @@ void mlx5_ib_cont_pages(struct ib_umem *umem, u64 addr, int *count, int *shift, } else { if (base + p != pfn) { tmp = (unsigned long)p; - m = find_first_bit(&tmp, sizeof(tmp)); + m = find_first_bit(&tmp, BITS_PER_LONG); skip = 1 << m; mask = skip - 1; base = pfn; -- cgit v1.3-18-gd494 From 6aaa382f1267644072f288916476879684502f73 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Fri, 26 Aug 2016 06:49:09 +0200 Subject: IB/hfi1: Fix the size parameter to find_first_bit The 2nd parameter of 'find_first_bit' is the number of bits to search. In this case, we are passing 'sizeof(u64)' which is 8. It is likely that the number of bits of 'port_mask' was expected here. Use sizeof() * 8 to get the correct number. It has been spotted by the following coccinelle script: @@ expression ret, x; @@ * ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...)); Signed-off-by: Christophe JAILLET Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/mad.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/mad.c b/drivers/infiniband/hw/hfi1/mad.c index 9912d2ca3ded..7ffc14f21523 100644 --- a/drivers/infiniband/hw/hfi1/mad.c +++ b/drivers/infiniband/hw/hfi1/mad.c @@ -2638,7 +2638,7 @@ static int pma_get_opa_datacounters(struct opa_pma_mad *pmp, */ port_mask = be64_to_cpu(req->port_select_mask[3]); port_num = find_first_bit((unsigned long *)&port_mask, - sizeof(port_mask)); + sizeof(port_mask) * 8); if (port_num != port) { pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; @@ -2842,7 +2842,7 @@ static int pma_get_opa_porterrors(struct opa_pma_mad *pmp, */ port_mask = be64_to_cpu(req->port_select_mask[3]); port_num = find_first_bit((unsigned long *)&port_mask, - sizeof(port_mask)); + sizeof(port_mask) * 8); if (port_num != port) { pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; @@ -3015,7 +3015,7 @@ static int pma_get_opa_errorinfo(struct opa_pma_mad *pmp, */ port_mask = be64_to_cpu(req->port_select_mask[3]); port_num = find_first_bit((unsigned long *)&port_mask, - sizeof(port_mask)); + sizeof(port_mask) * 8); if (port_num != port) { pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; @@ -3252,7 +3252,7 @@ static int pma_set_opa_errorinfo(struct opa_pma_mad *pmp, */ port_mask = be64_to_cpu(req->port_select_mask[3]); port_num = find_first_bit((unsigned long *)&port_mask, - sizeof(port_mask)); + sizeof(port_mask) * 8); if (port_num != port) { pmp->mad_hdr.status |= IB_SMP_INVALID_FIELD; -- cgit v1.3-18-gd494 From 63b268d232b869dfbc92e49c77f7e0648e1d039c Mon Sep 17 00:00:00 2001 From: Raju Rangoju Date: Mon, 29 Aug 2016 17:15:49 +0530 Subject: IB/isert: Properly release resources on DEVICE_REMOVAL When the low level driver exercises the hot unplug they would call rdma_cm cma_remove_one which would fire DEVICE_REMOVAL event to all cma consumers. Now, if consumer doesn't make sure they destroy all IB objects created on that IB device instance prior to finalizing all processing of DEVICE_REMOVAL callback, rdma_cm will let the lld to de-register with IB core and destroy the IB device instance. And if the consumer calls (say) ib_dereg_mr(), it will crash since that dev object is NULL. In the current implementation, iser-target just initiates the cleanup and returns from DEVICE_REMOVAL callback. This deferred work creates a race between iser-target cleaning IB objects(say MR) and lld destroying IB device instance. This patch includes the following fixes -> make sure that consumer frees all IB objects associated with device instance -> return non-zero from the callback to destroy the rdma_cm id Signed-off-by: Raju Rangoju Acked-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/isert/ib_isert.c | 23 ++++++++++++++++++++--- drivers/infiniband/ulp/isert/ib_isert.h | 2 ++ 2 files changed, 22 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 7914c14478cd..cae9bbcc27e7 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -403,6 +403,7 @@ isert_init_conn(struct isert_conn *isert_conn) INIT_LIST_HEAD(&isert_conn->node); init_completion(&isert_conn->login_comp); init_completion(&isert_conn->login_req_comp); + init_waitqueue_head(&isert_conn->rem_wait); kref_init(&isert_conn->kref); mutex_init(&isert_conn->mutex); INIT_WORK(&isert_conn->release_work, isert_release_work); @@ -578,7 +579,8 @@ isert_connect_release(struct isert_conn *isert_conn) BUG_ON(!device); isert_free_rx_descriptors(isert_conn); - if (isert_conn->cm_id) + if (isert_conn->cm_id && + !isert_conn->dev_removed) rdma_destroy_id(isert_conn->cm_id); if (isert_conn->qp) { @@ -593,7 +595,10 @@ isert_connect_release(struct isert_conn *isert_conn) isert_device_put(device); - kfree(isert_conn); + if (isert_conn->dev_removed) + wake_up_interruptible(&isert_conn->rem_wait); + else + kfree(isert_conn); } static void @@ -753,6 +758,7 @@ static int isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) { struct isert_np *isert_np = cma_id->context; + struct isert_conn *isert_conn; int ret = 0; isert_info("%s (%d): status %d id %p np %p\n", @@ -773,10 +779,21 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event) break; case RDMA_CM_EVENT_ADDR_CHANGE: /* FALLTHRU */ case RDMA_CM_EVENT_DISCONNECTED: /* FALLTHRU */ - case RDMA_CM_EVENT_DEVICE_REMOVAL: /* FALLTHRU */ case RDMA_CM_EVENT_TIMEWAIT_EXIT: /* FALLTHRU */ ret = isert_disconnected_handler(cma_id, event->event); break; + case RDMA_CM_EVENT_DEVICE_REMOVAL: + isert_conn = cma_id->qp->qp_context; + isert_conn->dev_removed = true; + isert_disconnected_handler(cma_id, event->event); + wait_event_interruptible(isert_conn->rem_wait, + isert_conn->state == ISER_CONN_DOWN); + kfree(isert_conn); + /* + * return non-zero from the callback to destroy + * the rdma cm id + */ + return 1; case RDMA_CM_EVENT_REJECTED: /* FALLTHRU */ case RDMA_CM_EVENT_UNREACHABLE: /* FALLTHRU */ case RDMA_CM_EVENT_CONNECT_ERROR: diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h index fc791efe3a10..c02ada57d7f5 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.h +++ b/drivers/infiniband/ulp/isert/ib_isert.h @@ -158,6 +158,8 @@ struct isert_conn { struct work_struct release_work; bool logout_posted; bool snd_w_inv; + wait_queue_head_t rem_wait; + bool dev_removed; }; #define ISERT_MAX_CQ 64 -- cgit v1.3-18-gd494 From 656aacea6c90ce8e15c2bdef4f89b74b73e2e34a Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Sun, 28 Aug 2016 22:57:11 +0800 Subject: IB/cxgb4: Make _free_qp static to silence build warning We get 1 warning when build kernel with W=1: drivers/infiniband/hw/cxgb4/qp.c:686:6: warning: no previous prototype for '_free_qp' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks it 'static'. Signed-off-by: Baoyou Xie Reviewed-by: Yuval Shaia Reviewed-by: Leon Romanovsky Acked-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index edb1172b6f54..690435229be7 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -683,7 +683,7 @@ static int build_inv_stag(union t4_wr *wqe, struct ib_send_wr *wr, return 0; } -void _free_qp(struct kref *kref) +static void _free_qp(struct kref *kref) { struct c4iw_qp *qhp; -- cgit v1.3-18-gd494 From 68c6bcdd8bd00394c234b915ab9b97c74104130c Mon Sep 17 00:00:00 2001 From: Erez Shitrit Date: Sun, 28 Aug 2016 10:58:30 +0300 Subject: IB/core: Fix use after free in send_leave function The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests') Signed-off-by: Erez Shitrit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/multicast.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c index 3a3c5d73bbfc..51c79b2fb0b8 100644 --- a/drivers/infiniband/core/multicast.c +++ b/drivers/infiniband/core/multicast.c @@ -106,7 +106,6 @@ struct mcast_group { atomic_t refcount; enum mcast_group_state state; struct ib_sa_query *query; - int query_id; u16 pkey_index; u8 leave_state; int retries; @@ -340,11 +339,7 @@ static int send_join(struct mcast_group *group, struct mcast_member *member) member->multicast.comp_mask, 3000, GFP_KERNEL, join_handler, group, &group->query); - if (ret >= 0) { - group->query_id = ret; - ret = 0; - } - return ret; + return (ret > 0) ? 0 : ret; } static int send_leave(struct mcast_group *group, u8 leave_state) @@ -364,11 +359,7 @@ static int send_leave(struct mcast_group *group, u8 leave_state) IB_SA_MCMEMBER_REC_JOIN_STATE, 3000, GFP_KERNEL, leave_handler, group, &group->query); - if (ret >= 0) { - group->query_id = ret; - ret = 0; - } - return ret; + return (ret > 0) ? 0 : ret; } static void join_group(struct mcast_group *group, struct mcast_member *member, -- cgit v1.3-18-gd494 From 546481c2816ea3c061ee9d5658eb48070f69212e Mon Sep 17 00:00:00 2001 From: Erez Shitrit Date: Sun, 28 Aug 2016 10:58:31 +0300 Subject: IB/ipoib: Fix memory corruption in ipoib cm mode connect flow When a new CM connection is being requested, ipoib driver copies data from the path pointer in the CM/tx object, the path object might be invalid at the point and memory corruption will happened later when now the CM driver will try using that data. The next scenario demonstrates it: neigh_add_path --> ipoib_cm_create_tx --> queue_work (pointer to path is in the cm/tx struct) #while the work is still in the queue, #the port goes down and causes the ipoib_flush_paths: ipoib_flush_paths --> path_free --> kfree(path) #at this point the work scheduled starts. ipoib_cm_tx_start --> copy from the (invalid)path pointer: (memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);) -> memory corruption. To fix that the driver now starts the CM/tx connection only if that specific path exists in the general paths database. This check is protected with the relevant locks, and uses the gid from the neigh member in the CM/tx object which is valid according to the ref count that was taken by the CM/tx. Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support') Signed-off-by: Erez Shitrit Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 + drivers/infiniband/ulp/ipoib/ipoib_cm.c | 16 ++++++++++++++++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 3 files changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 4f7d9b48df64..9dbfcc0ab577 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -478,6 +478,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_ah *address, u32 qpn); void ipoib_reap_ah(struct work_struct *work); +struct ipoib_path *__path_find(struct net_device *dev, void *gid); void ipoib_mark_paths_invalid(struct net_device *dev); void ipoib_flush_paths(struct net_device *dev); int ipoib_check_sm_sendonly_fullmember_support(struct ipoib_dev_priv *priv); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 951d9abcca8b..4ad297d3de89 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1318,6 +1318,8 @@ void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx) } } +#define QPN_AND_OPTIONS_OFFSET 4 + static void ipoib_cm_tx_start(struct work_struct *work) { struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, @@ -1326,6 +1328,7 @@ static void ipoib_cm_tx_start(struct work_struct *work) struct ipoib_neigh *neigh; struct ipoib_cm_tx *p; unsigned long flags; + struct ipoib_path *path; int ret; struct ib_sa_path_rec pathrec; @@ -1338,7 +1341,19 @@ static void ipoib_cm_tx_start(struct work_struct *work) p = list_entry(priv->cm.start_list.next, typeof(*p), list); list_del_init(&p->list); neigh = p->neigh; + qpn = IPOIB_QPN(neigh->daddr); + /* + * As long as the search is with these 2 locks, + * path existence indicates its validity. + */ + path = __path_find(dev, neigh->daddr + QPN_AND_OPTIONS_OFFSET); + if (!path) { + pr_info("%s ignore not valid path %pI6\n", + __func__, + neigh->daddr + QPN_AND_OPTIONS_OFFSET); + goto free_neigh; + } memcpy(&pathrec, &p->path->pathrec, sizeof pathrec); spin_unlock_irqrestore(&priv->lock, flags); @@ -1350,6 +1365,7 @@ static void ipoib_cm_tx_start(struct work_struct *work) spin_lock_irqsave(&priv->lock, flags); if (ret) { +free_neigh: neigh = p->neigh; if (neigh) { neigh->cm = NULL; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 74bcaa064226..cc1c1b062ea5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -485,7 +485,7 @@ int ipoib_set_mode(struct net_device *dev, const char *buf) return -EINVAL; } -static struct ipoib_path *__path_find(struct net_device *dev, void *gid) +struct ipoib_path *__path_find(struct net_device *dev, void *gid) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct rb_node *n = priv->path_tree.rb_node; -- cgit v1.3-18-gd494 From 25b64fc5f2c0779b53ec155d69cc06b7cdc6e99f Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 28 Aug 2016 10:58:32 +0300 Subject: Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one" By Mellanox HW design and SW implementation, poll_cq never fails and returns errors, so all these printks are to catch ULP bugs. In case of such bug, the reverted patch will cause reentry of the function, resulting in a printk storm. This reverts commit 5412352fcd8f ("IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one") Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/cq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 006db6436e3b..15b628996633 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -690,7 +690,7 @@ repoll: if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_OPCODE_NOP && is_send)) { pr_warn("Completion for NOP opcode detected!\n"); - return -EAGAIN; + return -EINVAL; } /* Resize CQ in progress */ @@ -721,7 +721,7 @@ repoll: if (unlikely(!mqp)) { pr_warn("CQ %06x with entry for unknown QPN %06x\n", cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK); - return -EAGAIN; + return -EINVAL; } *cur_qp = to_mibqp(mqp); @@ -739,7 +739,7 @@ repoll: if (unlikely(!msrq)) { pr_warn("CQ %06x with entry for unknown SRQN %06x\n", cq->mcq.cqn, srq_num); - return -EAGAIN; + return -EINVAL; } } -- cgit v1.3-18-gd494 From 20697434b6ea9c6d895ebc5217a46f18850a109f Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 28 Aug 2016 10:58:33 +0300 Subject: IB/mlx4: Don't return errors from poll_cq Remove returning errors from mlx4 poll_cq function. Polling CQ operation in kernel never fails by Mellanox HCA architecture and respective driver design. Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/cq.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 15b628996633..5df63dacaaa3 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -687,12 +687,6 @@ repoll: is_error = (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_ERROR; - if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_OPCODE_NOP && - is_send)) { - pr_warn("Completion for NOP opcode detected!\n"); - return -EINVAL; - } - /* Resize CQ in progress */ if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_RESIZE)) { if (cq->resize_buf) { @@ -718,12 +712,6 @@ repoll: */ mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev, be32_to_cpu(cqe->vlan_my_qpn)); - if (unlikely(!mqp)) { - pr_warn("CQ %06x with entry for unknown QPN %06x\n", - cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK); - return -EINVAL; - } - *cur_qp = to_mibqp(mqp); } @@ -736,11 +724,6 @@ repoll: /* SRQ is also in the radix tree */ msrq = mlx4_srq_lookup(to_mdev(cq->ibcq.device)->dev, srq_num); - if (unlikely(!msrq)) { - pr_warn("CQ %06x with entry for unknown SRQN %06x\n", - cq->mcq.cqn, srq_num); - return -EINVAL; - } } if (is_send) { @@ -891,7 +874,6 @@ int mlx4_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) struct mlx4_ib_qp *cur_qp = NULL; unsigned long flags; int npolled; - int err = 0; struct mlx4_ib_dev *mdev = to_mdev(cq->ibcq.device); spin_lock_irqsave(&cq->lock, flags); @@ -901,8 +883,7 @@ int mlx4_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) } for (npolled = 0; npolled < num_entries; ++npolled) { - err = mlx4_ib_poll_one(cq, &cur_qp, wc + npolled); - if (err) + if (mlx4_ib_poll_one(cq, &cur_qp, wc + npolled)) break; } @@ -911,10 +892,7 @@ int mlx4_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) out: spin_unlock_irqrestore(&cq->lock, flags); - if (err == 0 || err == -EAGAIN) - return npolled; - else - return err; + return npolled; } int mlx4_ib_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags) -- cgit v1.3-18-gd494 From 24be409beede1a7cbe95b1740c4cdade3b6a8187 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 28 Aug 2016 10:58:34 +0300 Subject: IB/mlx5: Return EINVAL when caller specifies too many SGEs The returned value should be EINVAL, because it is caused by wrong caller and not by internal overflow event. Signed-off-by: Chuck Lever Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 0dd7d93cac95..acb3b72e719e 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3758,7 +3758,7 @@ int mlx5_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, num_sge = wr->num_sge; if (unlikely(num_sge > qp->sq.max_gs)) { mlx5_ib_warn(dev, "\n"); - err = -ENOMEM; + err = -EINVAL; *bad_wr = wr; goto out; } -- cgit v1.3-18-gd494 From b2a232d21f301d600b02c6f9ccbc9f977331bb39 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 28 Aug 2016 10:58:35 +0300 Subject: IB/mlx5: Simplify code by removing return variable Return variable was set in a line before the actual return was called in begin_wqe function. This patch removes such variable and simplifies the code. Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index acb3b72e719e..174d09b9728b 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3658,12 +3658,8 @@ static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, struct ib_send_wr *wr, unsigned *idx, int *size, int nreq) { - int err = 0; - - if (unlikely(mlx5_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq))) { - err = -ENOMEM; - return err; - } + if (unlikely(mlx5_wq_overflow(&qp->sq, nreq, qp->ibqp.send_cq))) + return -ENOMEM; *idx = qp->sq.cur_post & (qp->sq.wqe_cnt - 1); *seg = mlx5_get_send_wqe(qp, *idx); @@ -3679,7 +3675,7 @@ static int begin_wqe(struct mlx5_ib_qp *qp, void **seg, *seg += sizeof(**ctrl); *size = sizeof(**ctrl) / 16; - return err; + return 0; } static void finish_wqe(struct mlx5_ib_qp *qp, -- cgit v1.3-18-gd494 From d9f88e5ab9a73058ebdde589219c0d37da250f06 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Sun, 28 Aug 2016 10:58:37 +0300 Subject: IB/mlx5: Use TIR number based on selector Use TIR number based on selector, it should be done to differentiate between RSS QP to RAW one. Reported-by: Sagi Grimberg Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky Tested-by: Sagi Grimberg Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 6 +++++- drivers/infiniband/hw/mlx5/mlx5_ib.h | 1 + drivers/infiniband/hw/mlx5/qp.c | 1 + 3 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 1b4094baa2de..8150ea372c53 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1849,6 +1849,7 @@ static struct ib_flow *mlx5_ib_create_flow(struct ib_qp *qp, int domain) { struct mlx5_ib_dev *dev = to_mdev(qp->device); + struct mlx5_ib_qp *mqp = to_mqp(qp); struct mlx5_ib_flow_handler *handler = NULL; struct mlx5_flow_destination *dst = NULL; struct mlx5_ib_flow_prio *ft_prio; @@ -1875,7 +1876,10 @@ static struct ib_flow *mlx5_ib_create_flow(struct ib_qp *qp, } dst->type = MLX5_FLOW_DESTINATION_TYPE_TIR; - dst->tir_num = to_mqp(qp)->raw_packet_qp.rq.tirn; + if (mqp->flags & MLX5_IB_QP_RSS) + dst->tir_num = mqp->rss_qp.tirn; + else + dst->tir_num = mqp->raw_packet_qp.rq.tirn; if (flow_attr->type == IB_FLOW_ATTR_NORMAL) { if (flow_attr->flags & IB_FLOW_ATTR_FLAGS_DONT_TRAP) { diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h index 372385d0f993..95146f4aa3e3 100644 --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -402,6 +402,7 @@ enum mlx5_ib_qp_flags { /* QP uses 1 as its source QP number */ MLX5_IB_QP_SQPN_QP1 = 1 << 6, MLX5_IB_QP_CAP_SCATTER_FCS = 1 << 7, + MLX5_IB_QP_RSS = 1 << 8, }; struct mlx5_umr_wr { diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 174d09b9728b..affc3f6598ca 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1449,6 +1449,7 @@ create_tir: kvfree(in); /* qpn is reserved for that QP */ qp->trans_qp.base.mqp.qpn = 0; + qp->flags |= MLX5_IB_QP_RSS; return 0; err: -- cgit v1.3-18-gd494 From dbdf7d4e7f911f79ceb08365a756bbf6eecac81c Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Sun, 28 Aug 2016 10:58:38 +0300 Subject: IB/mlx5: Don't return errors from poll_cq Remove returning errors from mlx5 poll_cq function. Polling CQ operation in kernel never fails by Mellanox HCA architecture and respective driver design. Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/cq.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c index 308a358e5b46..e4fac9292e4a 100644 --- a/drivers/infiniband/hw/mlx5/cq.c +++ b/drivers/infiniband/hw/mlx5/cq.c @@ -553,12 +553,6 @@ repoll: * from the table. */ mqp = __mlx5_qp_lookup(dev->mdev, qpn); - if (unlikely(!mqp)) { - mlx5_ib_warn(dev, "CQE@CQ %06x for unknown QPN %6x\n", - cq->mcq.cqn, qpn); - return -EINVAL; - } - *cur_qp = to_mibqp(mqp); } @@ -619,13 +613,6 @@ repoll: read_lock(&dev->mdev->priv.mkey_table.lock); mmkey = __mlx5_mr_lookup(dev->mdev, mlx5_base_mkey(be32_to_cpu(sig_err_cqe->mkey))); - if (unlikely(!mmkey)) { - read_unlock(&dev->mdev->priv.mkey_table.lock); - mlx5_ib_warn(dev, "CQE@CQ %06x for unknown MR %6x\n", - cq->mcq.cqn, be32_to_cpu(sig_err_cqe->mkey)); - return -EINVAL; - } - mr = to_mibmr(mmkey); get_sig_err_item(sig_err_cqe, &mr->sig->err_item); mr->sig->sig_err_exists = true; @@ -676,7 +663,6 @@ int mlx5_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) unsigned long flags; int soft_polled = 0; int npolled; - int err = 0; spin_lock_irqsave(&cq->lock, flags); if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { @@ -688,8 +674,7 @@ int mlx5_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) soft_polled = poll_soft_wc(cq, num_entries, wc); for (npolled = 0; npolled < num_entries - soft_polled; npolled++) { - err = mlx5_poll_one(cq, &cur_qp, wc + soft_polled + npolled); - if (err) + if (mlx5_poll_one(cq, &cur_qp, wc + soft_polled + npolled)) break; } @@ -698,10 +683,7 @@ int mlx5_ib_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc) out: spin_unlock_irqrestore(&cq->lock, flags); - if (err == 0 || err == -EAGAIN) - return soft_polled + npolled; - else - return err; + return soft_polled + npolled; } int mlx5_ib_arm_cq(struct ib_cq *ibcq, enum ib_cq_notify_flags flags) -- cgit v1.3-18-gd494 From 3e6c3b0fd5d071ed17bf91586aae35a6cfb8cdb3 Mon Sep 17 00:00:00 2001 From: Sebastian Sanchez Date: Wed, 31 Aug 2016 07:24:20 -0700 Subject: IB/hfi1: Fix SGE length for misaligned PIO copy When trying to align the source pointer and there's a byte carry in an SGE copy, bytes are borrowed from the next quad-word X to complete the required quad-word copy. Then, the SGE length is reduced by the number of borrowed bytes. After this, if the remaining number of bytes from quad-word X (extra bytes) is greater than the new SGE length, the number of extra bytes needs to be updated to the new SGE length. Otherwise, when the SGE length gets updated again after the extra bytes are read to create the new byte carry, it goes negative, which then becomes a very large number as the SGE length is an unsigned integer. This causes SGE buffer to be over-read. Reviewed-by: Dean Luick Signed-off-by: Sebastian Sanchez Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/pio_copy.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/pio_copy.c b/drivers/infiniband/hw/hfi1/pio_copy.c index 8c25e1b58849..3a1ef3056282 100644 --- a/drivers/infiniband/hw/hfi1/pio_copy.c +++ b/drivers/infiniband/hw/hfi1/pio_copy.c @@ -771,6 +771,9 @@ void seg_pio_copy_mid(struct pio_buf *pbuf, const void *from, size_t nbytes) read_extra_bytes(pbuf, from, to_fill); from += to_fill; nbytes -= to_fill; + /* may not be enough valid bytes left to align */ + if (extra > nbytes) + extra = nbytes; /* ...now write carry */ dest = pbuf->start + (pbuf->qw_written * sizeof(u64)); @@ -798,6 +801,15 @@ void seg_pio_copy_mid(struct pio_buf *pbuf, const void *from, size_t nbytes) read_low_bytes(pbuf, from, extra); from += extra; nbytes -= extra; + /* + * If no bytes are left, return early - we are done. + * NOTE: This short-circuit is *required* because + * "extra" may have been reduced in size and "from" + * is not aligned, as required when leaving this + * if block. + */ + if (nbytes == 0) + return; } /* at this point, from is QW aligned */ -- cgit v1.3-18-gd494 From af53493916693343955930556aaa83f875b8436a Mon Sep 17 00:00:00 2001 From: Jubin John Date: Wed, 31 Aug 2016 07:24:27 -0700 Subject: IB/hfi1: Fix AHG KDETH Intr shift In the set_txreq_header_ahg(), The KDETH Intr bit is obtained from the header in the user sdma request using a KDETH_GET shift and mask macro. This value is then futher right shifted by 16 causing us to lose the value i.e it is shifted to zero, leading to the following smatch warning: drivers/infiniband/hw/hfi1/user_sdma.c:1482 set_txreq_header_ahg() warn: mask and shift to zero The Intr bit should be left shifted into its correct position in the KDETH header before the AHG update. Reported-by: Dan Carpenter Reviewed-by: Mitko Haralanov Reviewed-by: Harish Chegondi Signed-off-by: Jubin John Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/user_sdma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c index 0ecf27903dc2..1694037d1eee 100644 --- a/drivers/infiniband/hw/hfi1/user_sdma.c +++ b/drivers/infiniband/hw/hfi1/user_sdma.c @@ -114,6 +114,8 @@ MODULE_PARM_DESC(sdma_comp_size, "Size of User SDMA completion ring. Default: 12 #define KDETH_HCRC_LOWER_SHIFT 24 #define KDETH_HCRC_LOWER_MASK 0xff +#define AHG_KDETH_INTR_SHIFT 12 + #define PBC2LRH(x) ((((x) & 0xfff) << 2) - 4) #define LRH2PBC(x) ((((x) >> 2) + 1) & 0xfff) @@ -1480,7 +1482,8 @@ static int set_txreq_header_ahg(struct user_sdma_request *req, /* Clear KDETH.SH on last packet */ if (unlikely(tx->flags & TXREQ_FLAGS_REQ_LAST_PKT)) { val |= cpu_to_le16(KDETH_GET(hdr->kdeth.ver_tid_offset, - INTR) >> 16); + INTR) << + AHG_KDETH_INTR_SHIFT); val &= cpu_to_le16(~(1U << 13)); AHG_HEADER_SET(req->ahg, diff, 7, 16, 14, val); } else { -- cgit v1.3-18-gd494 From 673b975f1fbad5382f76afdb987e7513c5f4b71b Mon Sep 17 00:00:00 2001 From: Dean Luick Date: Wed, 31 Aug 2016 07:24:33 -0700 Subject: IB/hfi1: Add QSFP sanity pre-check Sometimes a QSFP device does not respond in the expected time after a power-on. Add a read pre-check/retry when starting the link on driver load. Reviewed-by: Easwar Hariharan Signed-off-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 86 +++++++++++++++++++++++++++++++++++---- drivers/infiniband/hw/hfi1/chip.h | 1 + drivers/infiniband/hw/hfi1/hfi.h | 2 + drivers/infiniband/hw/hfi1/init.c | 1 + 4 files changed, 82 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index b32638d58ae8..ec3635a7ee3e 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -9490,6 +9490,78 @@ static void init_lcb(struct hfi1_devdata *dd) write_csr(dd, DC_LCB_CFG_TX_FIFOS_RESET, 0x00); } +/* + * Perform a test read on the QSFP. Return 0 on success, -ERRNO + * on error. + */ +static int test_qsfp_read(struct hfi1_pportdata *ppd) +{ + int ret; + u8 status; + + /* report success if not a QSFP */ + if (ppd->port_type != PORT_TYPE_QSFP) + return 0; + + /* read byte 2, the status byte */ + ret = one_qsfp_read(ppd, ppd->dd->hfi1_id, 2, &status, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + + return 0; /* success */ +} + +/* + * Values for QSFP retry. + * + * Give up after 10s (20 x 500ms). The overall timeout was empirically + * arrived at from experience on a large cluster. + */ +#define MAX_QSFP_RETRIES 20 +#define QSFP_RETRY_WAIT 500 /* msec */ + +/* + * Try a QSFP read. If it fails, schedule a retry for later. + * Called on first link activation after driver load. + */ +static void try_start_link(struct hfi1_pportdata *ppd) +{ + if (test_qsfp_read(ppd)) { + /* read failed */ + if (ppd->qsfp_retry_count >= MAX_QSFP_RETRIES) { + dd_dev_err(ppd->dd, "QSFP not responding, giving up\n"); + return; + } + dd_dev_info(ppd->dd, + "QSFP not responding, waiting and retrying %d\n", + (int)ppd->qsfp_retry_count); + ppd->qsfp_retry_count++; + queue_delayed_work(ppd->hfi1_wq, &ppd->start_link_work, + msecs_to_jiffies(QSFP_RETRY_WAIT)); + return; + } + ppd->qsfp_retry_count = 0; + + /* + * Tune the SerDes to a ballpark setting for optimal signal and bit + * error rate. Needs to be done before starting the link. + */ + tune_serdes(ppd); + start_link(ppd); +} + +/* + * Workqueue function to start the link after a delay. + */ +void handle_start_link(struct work_struct *work) +{ + struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata, + start_link_work.work); + try_start_link(ppd); +} + int bringup_serdes(struct hfi1_pportdata *ppd) { struct hfi1_devdata *dd = ppd->dd; @@ -9525,14 +9597,8 @@ int bringup_serdes(struct hfi1_pportdata *ppd) set_qsfp_int_n(ppd, 1); } - /* - * Tune the SerDes to a ballpark setting for - * optimal signal and bit error rate - * Needs to be done before starting the link - */ - tune_serdes(ppd); - - return start_link(ppd); + try_start_link(ppd); + return 0; } void hfi1_quiet_serdes(struct hfi1_pportdata *ppd) @@ -9549,6 +9615,10 @@ void hfi1_quiet_serdes(struct hfi1_pportdata *ppd) ppd->driver_link_ready = 0; ppd->link_enabled = 0; + ppd->qsfp_retry_count = MAX_QSFP_RETRIES; /* prevent more retries */ + flush_delayed_work(&ppd->start_link_work); + cancel_delayed_work_sync(&ppd->start_link_work); + ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_SMA_DISABLED); set_link_down_reason(ppd, OPA_LINKDOWN_REASON_SMA_DISABLED, 0, diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h index ed11107c50fe..e29573769efc 100644 --- a/drivers/infiniband/hw/hfi1/chip.h +++ b/drivers/infiniband/hw/hfi1/chip.h @@ -706,6 +706,7 @@ void handle_link_up(struct work_struct *work); void handle_link_down(struct work_struct *work); void handle_link_downgrade(struct work_struct *work); void handle_link_bounce(struct work_struct *work); +void handle_start_link(struct work_struct *work); void handle_sma_message(struct work_struct *work); void reset_qsfp(struct hfi1_pportdata *ppd); void qsfp_event(struct work_struct *work); diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index a021e660d482..28b91286798b 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -605,6 +605,7 @@ struct hfi1_pportdata { struct work_struct freeze_work; struct work_struct link_downgrade_work; struct work_struct link_bounce_work; + struct delayed_work start_link_work; /* host link state variables */ struct mutex hls_lock; u32 host_link_state; @@ -659,6 +660,7 @@ struct hfi1_pportdata { u8 linkinit_reason; u8 local_tx_rate; /* rate given to 8051 firmware */ u8 last_pstate; /* info only */ + u8 qsfp_retry_count; /* placeholders for IB MAD packet settings */ u8 overrun_threshold; diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index b7935451093c..000dc079bd88 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -500,6 +500,7 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd, INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade); INIT_WORK(&ppd->sma_message_work, handle_sma_message); INIT_WORK(&ppd->link_bounce_work, handle_link_bounce); + INIT_DELAYED_WORK(&ppd->start_link_work, handle_start_link); INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work); INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event); -- cgit v1.3-18-gd494 From 429b6a721727d49d8565b50a6bc0dc42432383a9 Mon Sep 17 00:00:00 2001 From: Harish Chegondi Date: Wed, 31 Aug 2016 07:24:40 -0700 Subject: IB/hfi1: Make n_krcvqs be an unsigned long integer The global variable n_krcvqs stores the sum of the number of kernel receive queues of VLs 0-7 which the user can pass to the driver through the module parameter array krcvqs which is of type unsigned integer. If the user passes large value(s) into krcvqs parameter array, it can cause an arithmetic overflow while calculating n_krcvqs which is also of type unsigned int. The overflow results in an incorrect value of n_krcvqs which can lead to kernel crash while loading the driver. Fix by changing the data type of n_krcvqs to unsigned long. This patch also changes the data type of other variables that get their values from n_krcvqs. Reviewed-by: Dennis Dalessandro Signed-off-by: Harish Chegondi Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 6 +++--- drivers/infiniband/hw/hfi1/hfi.h | 2 +- drivers/infiniband/hw/hfi1/init.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index ec3635a7ee3e..cc38004cea42 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -12935,7 +12935,7 @@ fail: */ static int set_up_context_variables(struct hfi1_devdata *dd) { - int num_kernel_contexts; + unsigned long num_kernel_contexts; int total_contexts; int ret; unsigned ngroups; @@ -12964,9 +12964,9 @@ static int set_up_context_variables(struct hfi1_devdata *dd) */ if (num_kernel_contexts > (dd->chip_send_contexts - num_vls - 1)) { dd_dev_err(dd, - "Reducing # kernel rcv contexts to: %d, from %d\n", + "Reducing # kernel rcv contexts to: %d, from %lu\n", (int)(dd->chip_send_contexts - num_vls - 1), - (int)num_kernel_contexts); + num_kernel_contexts); num_kernel_contexts = dd->chip_send_contexts - num_vls - 1; } /* diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 28b91286798b..325ec211370f 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1806,7 +1806,7 @@ extern unsigned int hfi1_max_mtu; extern unsigned int hfi1_cu; extern unsigned int user_credit_return_threshold; extern int num_user_contexts; -extern unsigned n_krcvqs; +extern unsigned long n_krcvqs; extern uint krcvqs[]; extern int krcvqsset; extern uint kdeth_qp; diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 000dc079bd88..384b43d2fd49 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -94,7 +94,7 @@ module_param_array(krcvqs, uint, &krcvqsset, S_IRUGO); MODULE_PARM_DESC(krcvqs, "Array of the number of non-control kernel receive queues by VL"); /* computed based on above array */ -unsigned n_krcvqs; +unsigned long n_krcvqs; static unsigned hfi1_rcvarr_split = 25; module_param_named(rcvarr_split, hfi1_rcvarr_split, uint, S_IRUGO); -- cgit v1.3-18-gd494 From 16170d9c102764f76c58aad244e947f4e3f44590 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 31 Aug 2016 07:24:46 -0700 Subject: IB/hfi1: Rework debugfs to use SRCU The debugfs RCU trips many debug kernel warnings because of potential sleeps with an RCU read lock held. This includes both user copy calls and slab allocations throughout the file. This patch switches the RCU to use SRCU for file remove/access race protection. In one case, the SRCU is implicit in the use of the raw debugfs file object and just works. In the seq_file case, a wrapper around seq_read() and seq_lseek() is used to enforce the SRCU using the debugfs supplied functions debugfs_use_file_start() and debugfs_use_file_stop(). The sychronize_rcu() is deleted since the SRCU prevents the remove access race. The RCU locking is kept for qp_stats since the QP hash list is protected using the non-sleepable RCU. Reviewed-by: Sebastian Sanchez Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/debugfs.c | 132 ++++++++++++++--------------------- 1 file changed, 52 insertions(+), 80 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/hfi1/debugfs.c b/drivers/infiniband/hw/hfi1/debugfs.c index a49cc88f08a2..5e9be16f6cd3 100644 --- a/drivers/infiniband/hw/hfi1/debugfs.c +++ b/drivers/infiniband/hw/hfi1/debugfs.c @@ -59,6 +59,40 @@ static struct dentry *hfi1_dbg_root; +/* wrappers to enforce srcu in seq file */ +static ssize_t hfi1_seq_read( + struct file *file, + char __user *buf, + size_t size, + loff_t *ppos) +{ + struct dentry *d = file->f_path.dentry; + int srcu_idx; + ssize_t r; + + r = debugfs_use_file_start(d, &srcu_idx); + if (likely(!r)) + r = seq_read(file, buf, size, ppos); + debugfs_use_file_finish(srcu_idx); + return r; +} + +static loff_t hfi1_seq_lseek( + struct file *file, + loff_t offset, + int whence) +{ + struct dentry *d = file->f_path.dentry; + int srcu_idx; + loff_t r; + + r = debugfs_use_file_start(d, &srcu_idx); + if (likely(!r)) + r = seq_lseek(file, offset, whence); + debugfs_use_file_finish(srcu_idx); + return r; +} + #define private2dd(file) (file_inode(file)->i_private) #define private2ppd(file) (file_inode(file)->i_private) @@ -87,8 +121,8 @@ static int _##name##_open(struct inode *inode, struct file *s) \ static const struct file_operations _##name##_file_ops = { \ .owner = THIS_MODULE, \ .open = _##name##_open, \ - .read = seq_read, \ - .llseek = seq_lseek, \ + .read = hfi1_seq_read, \ + .llseek = hfi1_seq_lseek, \ .release = seq_release \ } @@ -105,11 +139,9 @@ do { \ DEBUGFS_FILE_CREATE(#name, parent, data, &_##name##_file_ops, S_IRUGO) static void *_opcode_stats_seq_start(struct seq_file *s, loff_t *pos) -__acquires(RCU) { struct hfi1_opcode_stats_perctx *opstats; - rcu_read_lock(); if (*pos >= ARRAY_SIZE(opstats->stats)) return NULL; return pos; @@ -126,9 +158,7 @@ static void *_opcode_stats_seq_next(struct seq_file *s, void *v, loff_t *pos) } static void _opcode_stats_seq_stop(struct seq_file *s, void *v) -__releases(RCU) { - rcu_read_unlock(); } static int _opcode_stats_seq_show(struct seq_file *s, void *v) @@ -285,12 +315,10 @@ DEBUGFS_SEQ_FILE_OPEN(qp_stats) DEBUGFS_FILE_OPS(qp_stats); static void *_sdes_seq_start(struct seq_file *s, loff_t *pos) -__acquires(RCU) { struct hfi1_ibdev *ibd; struct hfi1_devdata *dd; - rcu_read_lock(); ibd = (struct hfi1_ibdev *)s->private; dd = dd_from_dev(ibd); if (!dd->per_sdma || *pos >= dd->num_sdma) @@ -310,9 +338,7 @@ static void *_sdes_seq_next(struct seq_file *s, void *v, loff_t *pos) } static void _sdes_seq_stop(struct seq_file *s, void *v) -__releases(RCU) { - rcu_read_unlock(); } static int _sdes_seq_show(struct seq_file *s, void *v) @@ -339,11 +365,9 @@ static ssize_t dev_counters_read(struct file *file, char __user *buf, struct hfi1_devdata *dd; ssize_t rval; - rcu_read_lock(); dd = private2dd(file); avail = hfi1_read_cntrs(dd, NULL, &counters); rval = simple_read_from_buffer(buf, count, ppos, counters, avail); - rcu_read_unlock(); return rval; } @@ -356,11 +380,9 @@ static ssize_t dev_names_read(struct file *file, char __user *buf, struct hfi1_devdata *dd; ssize_t rval; - rcu_read_lock(); dd = private2dd(file); avail = hfi1_read_cntrs(dd, &names, NULL); rval = simple_read_from_buffer(buf, count, ppos, names, avail); - rcu_read_unlock(); return rval; } @@ -383,11 +405,9 @@ static ssize_t portnames_read(struct file *file, char __user *buf, struct hfi1_devdata *dd; ssize_t rval; - rcu_read_lock(); dd = private2dd(file); avail = hfi1_read_portcntrs(dd->pport, &names, NULL); rval = simple_read_from_buffer(buf, count, ppos, names, avail); - rcu_read_unlock(); return rval; } @@ -400,11 +420,9 @@ static ssize_t portcntrs_debugfs_read(struct file *file, char __user *buf, struct hfi1_pportdata *ppd; ssize_t rval; - rcu_read_lock(); ppd = private2ppd(file); avail = hfi1_read_portcntrs(ppd, NULL, &counters); rval = simple_read_from_buffer(buf, count, ppos, counters, avail); - rcu_read_unlock(); return rval; } @@ -434,16 +452,13 @@ static ssize_t asic_flags_read(struct file *file, char __user *buf, int used; int i; - rcu_read_lock(); ppd = private2ppd(file); dd = ppd->dd; size = PAGE_SIZE; used = 0; tmp = kmalloc(size, GFP_KERNEL); - if (!tmp) { - rcu_read_unlock(); + if (!tmp) return -ENOMEM; - } scratch0 = read_csr(dd, ASIC_CFG_SCRATCH); used += scnprintf(tmp + used, size - used, @@ -470,7 +485,6 @@ static ssize_t asic_flags_read(struct file *file, char __user *buf, used += scnprintf(tmp + used, size - used, "Write bits to clear\n"); ret = simple_read_from_buffer(buf, count, ppos, tmp, used); - rcu_read_unlock(); kfree(tmp); return ret; } @@ -486,15 +500,12 @@ static ssize_t asic_flags_write(struct file *file, const char __user *buf, u64 scratch0; u64 clear; - rcu_read_lock(); ppd = private2ppd(file); dd = ppd->dd; buff = kmalloc(count + 1, GFP_KERNEL); - if (!buff) { - ret = -ENOMEM; - goto do_return; - } + if (!buff) + return -ENOMEM; ret = copy_from_user(buff, buf, count); if (ret > 0) { @@ -527,8 +538,6 @@ static ssize_t asic_flags_write(struct file *file, const char __user *buf, do_free: kfree(buff); - do_return: - rcu_read_unlock(); return ret; } @@ -542,18 +551,14 @@ static ssize_t qsfp_debugfs_dump(struct file *file, char __user *buf, char *tmp; int ret; - rcu_read_lock(); ppd = private2ppd(file); tmp = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!tmp) { - rcu_read_unlock(); + if (!tmp) return -ENOMEM; - } ret = qsfp_dump(ppd, tmp, PAGE_SIZE); if (ret > 0) ret = simple_read_from_buffer(buf, count, ppos, tmp, ret); - rcu_read_unlock(); kfree(tmp); return ret; } @@ -569,7 +574,6 @@ static ssize_t __i2c_debugfs_write(struct file *file, const char __user *buf, int offset; int total_written; - rcu_read_lock(); ppd = private2ppd(file); /* byte offset format: [offsetSize][i2cAddr][offsetHigh][offsetLow] */ @@ -577,16 +581,12 @@ static ssize_t __i2c_debugfs_write(struct file *file, const char __user *buf, offset = *ppos & 0xffff; /* explicitly reject invalid address 0 to catch cp and cat */ - if (i2c_addr == 0) { - ret = -EINVAL; - goto _return; - } + if (i2c_addr == 0) + return -EINVAL; buff = kmalloc(count, GFP_KERNEL); - if (!buff) { - ret = -ENOMEM; - goto _return; - } + if (!buff) + return -ENOMEM; ret = copy_from_user(buff, buf, count); if (ret > 0) { @@ -606,8 +606,6 @@ static ssize_t __i2c_debugfs_write(struct file *file, const char __user *buf, _free: kfree(buff); - _return: - rcu_read_unlock(); return ret; } @@ -636,7 +634,6 @@ static ssize_t __i2c_debugfs_read(struct file *file, char __user *buf, int offset; int total_read; - rcu_read_lock(); ppd = private2ppd(file); /* byte offset format: [offsetSize][i2cAddr][offsetHigh][offsetLow] */ @@ -644,16 +641,12 @@ static ssize_t __i2c_debugfs_read(struct file *file, char __user *buf, offset = *ppos & 0xffff; /* explicitly reject invalid address 0 to catch cp and cat */ - if (i2c_addr == 0) { - ret = -EINVAL; - goto _return; - } + if (i2c_addr == 0) + return -EINVAL; buff = kmalloc(count, GFP_KERNEL); - if (!buff) { - ret = -ENOMEM; - goto _return; - } + if (!buff) + return -ENOMEM; total_read = i2c_read(ppd, target, i2c_addr, offset, buff, count); if (total_read < 0) { @@ -673,8 +666,6 @@ static ssize_t __i2c_debugfs_read(struct file *file, char __user *buf, _free: kfree(buff); - _return: - rcu_read_unlock(); return ret; } @@ -701,26 +692,20 @@ static ssize_t __qsfp_debugfs_write(struct file *file, const char __user *buf, int ret; int total_written; - rcu_read_lock(); - if (*ppos + count > QSFP_PAGESIZE * 4) { /* base page + page00-page03 */ - ret = -EINVAL; - goto _return; - } + if (*ppos + count > QSFP_PAGESIZE * 4) /* base page + page00-page03 */ + return -EINVAL; ppd = private2ppd(file); buff = kmalloc(count, GFP_KERNEL); - if (!buff) { - ret = -ENOMEM; - goto _return; - } + if (!buff) + return -ENOMEM; ret = copy_from_user(buff, buf, count); if (ret > 0) { ret = -EFAULT; goto _free; } - total_written = qsfp_write(ppd, target, *ppos, buff, count); if (total_written < 0) { ret = total_written; @@ -733,8 +718,6 @@ static ssize_t __qsfp_debugfs_write(struct file *file, const char __user *buf, _free: kfree(buff); - _return: - rcu_read_unlock(); return ret; } @@ -761,7 +744,6 @@ static ssize_t __qsfp_debugfs_read(struct file *file, char __user *buf, int ret; int total_read; - rcu_read_lock(); if (*ppos + count > QSFP_PAGESIZE * 4) { /* base page + page00-page03 */ ret = -EINVAL; goto _return; @@ -794,7 +776,6 @@ static ssize_t __qsfp_debugfs_read(struct file *file, char __user *buf, _free: kfree(buff); _return: - rcu_read_unlock(); return ret; } @@ -1010,7 +991,6 @@ void hfi1_dbg_ibdev_exit(struct hfi1_ibdev *ibd) debugfs_remove_recursive(ibd->hfi1_ibdev_dbg); out: ibd->hfi1_ibdev_dbg = NULL; - synchronize_rcu(); } /* @@ -1035,9 +1015,7 @@ static const char * const hfi1_statnames[] = { }; static void *_driver_stats_names_seq_start(struct seq_file *s, loff_t *pos) -__acquires(RCU) { - rcu_read_lock(); if (*pos >= ARRAY_SIZE(hfi1_statnames)) return NULL; return pos; @@ -1055,9 +1033,7 @@ static void *_driver_stats_names_seq_next( } static void _driver_stats_names_seq_stop(struct seq_file *s, void *v) -__releases(RCU) { - rcu_read_unlock(); } static int _driver_stats_names_seq_show(struct seq_file *s, void *v) @@ -1073,9 +1049,7 @@ DEBUGFS_SEQ_FILE_OPEN(driver_stats_names) DEBUGFS_FILE_OPS(driver_stats_names); static void *_driver_stats_seq_start(struct seq_file *s, loff_t *pos) -__acquires(RCU) { - rcu_read_lock(); if (*pos >= ARRAY_SIZE(hfi1_statnames)) return NULL; return pos; @@ -1090,9 +1064,7 @@ static void *_driver_stats_seq_next(struct seq_file *s, void *v, loff_t *pos) } static void _driver_stats_seq_stop(struct seq_file *s, void *v) -__releases(RCU) { - rcu_read_unlock(); } static u64 hfi1_sps_ints(void) -- cgit v1.3-18-gd494 From 5331d9cab32ef640b4cd38a43b0858874fbb7168 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 16 Aug 2016 16:59:53 +0100 Subject: ACPI / drivers: replace acpi_probe_lock spinlock with mutex Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Cc: 4.4+ # 4.4+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ad9fc84a8601..e878fc799af7 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2054,7 +2054,7 @@ int __init acpi_scan_init(void) static struct acpi_probe_entry *ape; static int acpi_probe_count; -static DEFINE_SPINLOCK(acpi_probe_lock); +static DEFINE_MUTEX(acpi_probe_mutex); static int __init acpi_match_madt(struct acpi_subtable_header *header, const unsigned long end) @@ -2073,7 +2073,7 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr) if (acpi_disabled) return 0; - spin_lock(&acpi_probe_lock); + mutex_lock(&acpi_probe_mutex); for (ape = ap_head; nr; ape++, nr--) { if (ACPI_COMPARE_NAME(ACPI_SIG_MADT, ape->id)) { acpi_probe_count = 0; @@ -2086,7 +2086,7 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr) count++; } } - spin_unlock(&acpi_probe_lock); + mutex_unlock(&acpi_probe_mutex); return count; } -- cgit v1.3-18-gd494 From 4a29b3484f857ff350f203a2d9bf3b428c9e0bf2 Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Fri, 2 Sep 2016 02:36:58 +0300 Subject: tpm: invalid self test error message The driver emits invalid self test error message even though the init succeeds. Signed-off-by: Jarkko Sakkinen Fixes: cae8b441fc20 ("tpm: Factor out common startup code") Reviewed-by: James Morris Signed-off-by: James Morris --- drivers/char/tpm/tpm2-cmd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c index 08c7e23ed535..0c75c3f1689f 100644 --- a/drivers/char/tpm/tpm2-cmd.c +++ b/drivers/char/tpm/tpm2-cmd.c @@ -957,7 +957,7 @@ int tpm2_auto_startup(struct tpm_chip *chip) goto out; rc = tpm2_do_selftest(chip); - if (rc != TPM2_RC_INITIALIZE) { + if (rc != 0 && rc != TPM2_RC_INITIALIZE) { dev_err(&chip->dev, "TPM self test failed\n"); goto out; } @@ -974,7 +974,6 @@ int tpm2_auto_startup(struct tpm_chip *chip) } } - return rc; out: if (rc > 0) rc = -ENODEV; -- cgit v1.3-18-gd494 From 1358bd5a7477b346dfb6b502051d61f29b11a200 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:06 -0500 Subject: net: smsc911x: Remove multiple exit points from smsc911x_open Rework the error handling in smsc911x open in preparation for the mdio startup being moved here. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index ca3134540d2d..c9b0e055c62f 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1520,17 +1520,20 @@ static int smsc911x_open(struct net_device *dev) unsigned int timeout; unsigned int temp; unsigned int intcfg; + int retval; /* if the phy is not yet registered, retry later*/ if (!dev->phydev) { SMSC_WARN(pdata, hw, "phy_dev is NULL"); - return -EAGAIN; + retval = -EAGAIN; + goto out; } /* Reset the LAN911x */ - if (smsc911x_soft_reset(pdata)) { + retval = smsc911x_soft_reset(pdata); + if (retval) { SMSC_WARN(pdata, hw, "soft reset failed"); - return -EIO; + goto out; } smsc911x_reg_write(pdata, HW_CFG, 0x00050000); @@ -1600,7 +1603,8 @@ static int smsc911x_open(struct net_device *dev) if (!pdata->software_irq_signal) { netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); - return -ENODEV; + retval = -ENODEV; + goto out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1646,6 +1650,8 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; +out: + return retval; } /* Entry point for stopping the interface */ -- cgit v1.3-18-gd494 From aea95dd52db436f406f3f45a455a710774a3a210 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:07 -0500 Subject: net: smsc911x: Fix register_netdev, phy startup, driver unload ordering Move phy startup/shutdown into the smsc911x_open/stop routines. This allows the module to be unloaded because phy_connect_direct is no longer always holding the module use count. This one change also resolves a number of other problems. The link status of a downed interface no longer reflects a stale state. Errors caused by the net device being opened before the mdio/phy was configured. There is also a potential power savings as the phy's don't remain powered when the interface isn't running. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 48 ++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index c9b0e055c62f..823ad3f3716d 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1099,15 +1099,8 @@ static int smsc911x_mii_init(struct platform_device *pdev, goto err_out_free_bus_2; } - if (smsc911x_mii_probe(dev) < 0) { - SMSC_WARN(pdata, probe, "Error registering mii bus"); - goto err_out_unregister_bus_3; - } - return 0; -err_out_unregister_bus_3: - mdiobus_unregister(pdata->mii_bus); err_out_free_bus_2: mdiobus_free(pdata->mii_bus); err_out_1: @@ -1522,18 +1515,20 @@ static int smsc911x_open(struct net_device *dev) unsigned int intcfg; int retval; - /* if the phy is not yet registered, retry later*/ + /* find and start the given phy */ if (!dev->phydev) { - SMSC_WARN(pdata, hw, "phy_dev is NULL"); - retval = -EAGAIN; - goto out; + retval = smsc911x_mii_probe(dev); + if (retval < 0) { + SMSC_WARN(pdata, probe, "Error starting phy"); + goto out; + } } /* Reset the LAN911x */ retval = smsc911x_soft_reset(pdata); if (retval) { SMSC_WARN(pdata, hw, "soft reset failed"); - goto out; + goto mii_free_out; } smsc911x_reg_write(pdata, HW_CFG, 0x00050000); @@ -1604,7 +1599,7 @@ static int smsc911x_open(struct net_device *dev) netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); retval = -ENODEV; - goto out; + goto mii_free_out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1650,6 +1645,10 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; + +mii_free_out: + phy_disconnect(dev->phydev); + dev->phydev = NULL; out: return retval; } @@ -1674,8 +1673,12 @@ static int smsc911x_stop(struct net_device *dev) smsc911x_tx_update_txcounters(dev); /* Bring the PHY down */ - if (dev->phydev) + if (dev->phydev) { phy_stop(dev->phydev); + phy_disconnect(dev->phydev); + dev->phydev = NULL; + } + netif_carrier_off(dev); SMSC_TRACE(pdata, ifdown, "Interface stopped"); return 0; @@ -2297,11 +2300,10 @@ static int smsc911x_drv_remove(struct platform_device *pdev) pdata = netdev_priv(dev); BUG_ON(!pdata); BUG_ON(!pdata->ioaddr); - BUG_ON(!dev->phydev); + WARN_ON(dev->phydev); SMSC_TRACE(pdata, ifdown, "Stopping driver"); - phy_disconnect(dev->phydev); mdiobus_unregister(pdata->mii_bus); mdiobus_free(pdata->mii_bus); @@ -2500,6 +2502,12 @@ static int smsc911x_drv_probe(struct platform_device *pdev) netif_carrier_off(dev); + retval = smsc911x_mii_init(pdev, dev); + if (retval) { + SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); + goto out_free_irq; + } + retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); @@ -2509,12 +2517,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) "Network interface: \"%s\"", dev->name); } - retval = smsc911x_mii_init(pdev, dev); - if (retval) { - SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_unregister_netdev_5; - } - spin_lock_irq(&pdata->mac_lock); /* Check if mac address has been specified when bringing interface up */ @@ -2550,8 +2552,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) return 0; -out_unregister_netdev_5: - unregister_netdev(dev); out_free_irq: free_irq(dev->irq, dev); out_disable_resources: -- cgit v1.3-18-gd494 From a85f00c36ef53ea3cb5ebf3dee4ce9cc6726671f Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:08 -0500 Subject: net: smsc911x: Move interrupt handler before open In preparation for the allocating/enabling interrupts in the ndo_open routine move the irq handler before it. Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 122 +++++++++++++++++------------------ 1 file changed, 61 insertions(+), 61 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 823ad3f3716d..c2e56f06713a 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1507,6 +1507,67 @@ static void smsc911x_disable_irq_chip(struct net_device *dev) smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); } +static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct smsc911x_data *pdata = netdev_priv(dev); + u32 intsts = smsc911x_reg_read(pdata, INT_STS); + u32 inten = smsc911x_reg_read(pdata, INT_EN); + int serviced = IRQ_NONE; + u32 temp; + + if (unlikely(intsts & inten & INT_STS_SW_INT_)) { + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_SW_INT_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); + pdata->software_irq_signal = 1; + smp_wmb(); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { + /* Called when there is a multicast update scheduled and + * it is now safe to complete the update */ + SMSC_TRACE(pdata, intr, "RX Stop interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); + if (pdata->multicast_update_pending) + smsc911x_rx_multicast_update_workaround(pdata); + serviced = IRQ_HANDLED; + } + + if (intsts & inten & INT_STS_TDFA_) { + temp = smsc911x_reg_read(pdata, FIFO_INT); + temp |= FIFO_INT_TX_AVAIL_LEVEL_; + smsc911x_reg_write(pdata, FIFO_INT, temp); + smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); + netif_wake_queue(dev); + serviced = IRQ_HANDLED; + } + + if (unlikely(intsts & inten & INT_STS_RXE_)) { + SMSC_TRACE(pdata, intr, "RX Error interrupt"); + smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); + serviced = IRQ_HANDLED; + } + + if (likely(intsts & inten & INT_STS_RSFL_)) { + if (likely(napi_schedule_prep(&pdata->napi))) { + /* Disable Rx interrupts */ + temp = smsc911x_reg_read(pdata, INT_EN); + temp &= (~INT_EN_RSFL_EN_); + smsc911x_reg_write(pdata, INT_EN, temp); + /* Schedule a NAPI poll */ + __napi_schedule(&pdata->napi); + } else { + SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); + } + serviced = IRQ_HANDLED; + } + + return serviced; +} + static int smsc911x_open(struct net_device *dev) { struct smsc911x_data *pdata = netdev_priv(dev); @@ -1820,67 +1881,6 @@ static void smsc911x_set_multicast_list(struct net_device *dev) spin_unlock_irqrestore(&pdata->mac_lock, flags); } -static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct smsc911x_data *pdata = netdev_priv(dev); - u32 intsts = smsc911x_reg_read(pdata, INT_STS); - u32 inten = smsc911x_reg_read(pdata, INT_EN); - int serviced = IRQ_NONE; - u32 temp; - - if (unlikely(intsts & inten & INT_STS_SW_INT_)) { - temp = smsc911x_reg_read(pdata, INT_EN); - temp &= (~INT_EN_SW_INT_EN_); - smsc911x_reg_write(pdata, INT_EN, temp); - smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); - pdata->software_irq_signal = 1; - smp_wmb(); - serviced = IRQ_HANDLED; - } - - if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { - /* Called when there is a multicast update scheduled and - * it is now safe to complete the update */ - SMSC_TRACE(pdata, intr, "RX Stop interrupt"); - smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); - if (pdata->multicast_update_pending) - smsc911x_rx_multicast_update_workaround(pdata); - serviced = IRQ_HANDLED; - } - - if (intsts & inten & INT_STS_TDFA_) { - temp = smsc911x_reg_read(pdata, FIFO_INT); - temp |= FIFO_INT_TX_AVAIL_LEVEL_; - smsc911x_reg_write(pdata, FIFO_INT, temp); - smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); - netif_wake_queue(dev); - serviced = IRQ_HANDLED; - } - - if (unlikely(intsts & inten & INT_STS_RXE_)) { - SMSC_TRACE(pdata, intr, "RX Error interrupt"); - smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); - serviced = IRQ_HANDLED; - } - - if (likely(intsts & inten & INT_STS_RSFL_)) { - if (likely(napi_schedule_prep(&pdata->napi))) { - /* Disable Rx interrupts */ - temp = smsc911x_reg_read(pdata, INT_EN); - temp &= (~INT_EN_RSFL_EN_); - smsc911x_reg_write(pdata, INT_EN, temp); - /* Schedule a NAPI poll */ - __napi_schedule(&pdata->napi); - } else { - SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); - } - serviced = IRQ_HANDLED; - } - - return serviced; -} - #ifdef CONFIG_NET_POLL_CONTROLLER static void smsc911x_poll_controller(struct net_device *dev) { -- cgit v1.3-18-gd494 From f252974eaa64f64b940894f24bfa162a8e7f6b0d Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 1 Sep 2016 15:15:09 -0500 Subject: net: smsc911x: Move interrupt allocation to open/stop The /proc/irq/xx information is incorrect for smsc911x because the request_irq is happening before the register_netdev has the proper device name. Moving it to the open also fixes the case of when the device is renamed. Reported-by: Will Deacon Signed-off-by: Jeremy Linton Tested-by: Will Deacon Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 47 ++++++++++++++---------------------- 1 file changed, 18 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index c2e56f06713a..4f8910b7db2e 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1575,6 +1575,7 @@ static int smsc911x_open(struct net_device *dev) unsigned int temp; unsigned int intcfg; int retval; + int irq_flags; /* find and start the given phy */ if (!dev->phydev) { @@ -1645,6 +1646,15 @@ static int smsc911x_open(struct net_device *dev) pdata->software_irq_signal = 0; smp_wmb(); + irq_flags = irq_get_trigger_type(dev->irq); + retval = request_irq(dev->irq, smsc911x_irqhandler, + irq_flags | IRQF_SHARED, dev->name, dev); + if (retval) { + SMSC_WARN(pdata, probe, + "Unable to claim requested irq: %d", dev->irq); + goto mii_free_out; + } + temp = smsc911x_reg_read(pdata, INT_EN); temp |= INT_EN_SW_INT_EN_; smsc911x_reg_write(pdata, INT_EN, temp); @@ -1660,7 +1670,7 @@ static int smsc911x_open(struct net_device *dev) netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", dev->irq); retval = -ENODEV; - goto mii_free_out; + goto irq_stop_out; } SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", dev->irq); @@ -1707,6 +1717,8 @@ static int smsc911x_open(struct net_device *dev) netif_start_queue(dev); return 0; +irq_stop_out: + free_irq(dev->irq, dev); mii_free_out: phy_disconnect(dev->phydev); dev->phydev = NULL; @@ -1733,6 +1745,8 @@ static int smsc911x_stop(struct net_device *dev) dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); smsc911x_tx_update_txcounters(dev); + free_irq(dev->irq, dev); + /* Bring the PHY down */ if (dev->phydev) { phy_stop(dev->phydev); @@ -2308,7 +2322,6 @@ static int smsc911x_drv_remove(struct platform_device *pdev) mdiobus_free(pdata->mii_bus); unregister_netdev(dev); - free_irq(dev->irq, dev); res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smsc911x-memory"); if (!res) @@ -2393,8 +2406,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev) struct smsc911x_data *pdata; struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); struct resource *res; - unsigned int intcfg = 0; - int res_size, irq, irq_flags; + int res_size, irq; int retval; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -2433,7 +2445,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) pdata = netdev_priv(dev); dev->irq = irq; - irq_flags = irq_get_trigger_type(irq); pdata->ioaddr = ioremap_nocache(res->start, res_size); pdata->dev = dev; @@ -2480,38 +2491,18 @@ static int smsc911x_drv_probe(struct platform_device *pdev) if (retval < 0) goto out_disable_resources; - /* configure irq polarity and type before connecting isr */ - if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) - intcfg |= INT_CFG_IRQ_POL_; - - if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) - intcfg |= INT_CFG_IRQ_TYPE_; - - smsc911x_reg_write(pdata, INT_CFG, intcfg); - - /* Ensure interrupts are globally disabled before connecting ISR */ - smsc911x_disable_irq_chip(dev); - - retval = request_irq(dev->irq, smsc911x_irqhandler, - irq_flags | IRQF_SHARED, dev->name, dev); - if (retval) { - SMSC_WARN(pdata, probe, - "Unable to claim requested irq: %d", dev->irq); - goto out_disable_resources; - } - netif_carrier_off(dev); retval = smsc911x_mii_init(pdev, dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); - goto out_free_irq; + goto out_disable_resources; } retval = register_netdev(dev); if (retval) { SMSC_WARN(pdata, probe, "Error %i registering device", retval); - goto out_free_irq; + goto out_disable_resources; } else { SMSC_TRACE(pdata, probe, "Network interface: \"%s\"", dev->name); @@ -2552,8 +2543,6 @@ static int smsc911x_drv_probe(struct platform_device *pdev) return 0; -out_free_irq: - free_irq(dev->irq, dev); out_disable_resources: pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); -- cgit v1.3-18-gd494 From d0716dde375eb6bff332763bb2137302120d263d Mon Sep 17 00:00:00 2001 From: Sien Wu Date: Thu, 1 Sep 2016 18:24:29 -0500 Subject: spi: Prevent unexpected SPI time out due to arithmetic overflow When reading SPI flash as MTD device, the transfer length is directly passed to the spi driver. If the requested data size exceeds 512KB, it will cause the time out calculation to overflow since transfer length is 32-bit unsigned integer. This issue is resolved by using 64-bit unsigned integer to perform the arithmetic. Signed-off-by: Sien Wu Acked-by: Brad Keryan Acked-by: Gratian Crisan Acked-by: Brad Mouring Natinst-ReviewBoard-ID 150232 Signed-off-by: Mark Brown --- drivers/spi/spi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 51ad42fad567..ac889df9b1f3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -960,7 +960,7 @@ static int spi_transfer_one_message(struct spi_master *master, struct spi_transfer *xfer; bool keep_cs = false; int ret = 0; - unsigned long ms = 1; + unsigned long long ms = 1; struct spi_statistics *statm = &master->statistics; struct spi_statistics *stats = &msg->spi->statistics; @@ -991,9 +991,13 @@ static int spi_transfer_one_message(struct spi_master *master, if (ret > 0) { ret = 0; - ms = xfer->len * 8 * 1000 / xfer->speed_hz; + ms = 8LL * 1000LL * xfer->len; + do_div(ms, xfer->speed_hz); ms += ms + 100; /* some tolerance */ + if (ms > UINT_MAX) + ms = UINT_MAX; + ms = wait_for_completion_timeout(&master->xfer_completion, msecs_to_jiffies(ms)); } -- cgit v1.3-18-gd494 From 36afb176d3c9580651d7f410ed7f000ec48b5137 Mon Sep 17 00:00:00 2001 From: "Kweh, Hock Leong" Date: Mon, 29 Aug 2016 18:50:56 +0800 Subject: iio: fix pressure data output unit in hid-sensor-attributes According to IIO ABI definition, IIO_PRESSURE data output unit is kilopascal: http://lxr.free-electrons.com/source/Documentation/ABI/testing/sysfs-bus-iio This patch fix output unit of HID pressure sensor IIO driver from pascal to kilopascal to follow IIO ABI definition. Signed-off-by: Kweh, Hock Leong Reviewed-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/common/hid-sensors/hid-sensor-attributes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index e81f434760f4..dc33c1dd5191 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -56,8 +56,8 @@ static struct { {HID_USAGE_SENSOR_ALS, 0, 1, 0}, {HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0}, - {HID_USAGE_SENSOR_PRESSURE, 0, 100000, 0}, - {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 1, 0}, + {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, + {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000}, }; static int pow_10(unsigned power) -- cgit v1.3-18-gd494 From 1c500840934a138bd6b13556c210516e9301fbee Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 25 Aug 2016 09:45:33 -0700 Subject: iio: accel: bmc150: reset chip at init time In at least one known setup, the chip comes up in a state where reading the chip ID returns garbage unless it's been reset, due to noise on the wires during system boot. All supported chips have the same reset method, and based on the datasheets they all need 1.3 or 1.8ms to recover after reset. So, do the conservative thing here and always reset the chip. Signed-off-by: Olof Johansson Reviewed-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/bmc150-accel-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index bf17aae66145..59b380dbf27f 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -67,6 +67,9 @@ #define BMC150_ACCEL_REG_PMU_BW 0x10 #define BMC150_ACCEL_DEF_BW 125 +#define BMC150_ACCEL_REG_RESET 0x14 +#define BMC150_ACCEL_RESET_VAL 0xB6 + #define BMC150_ACCEL_REG_INT_MAP_0 0x19 #define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2) @@ -1497,6 +1500,14 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data) int ret, i; unsigned int val; + /* + * Reset chip to get it in a known good state. A delay of 1.8ms after + * reset is required according to the data sheets of supported chips. + */ + regmap_write(data->regmap, BMC150_ACCEL_REG_RESET, + BMC150_ACCEL_RESET_VAL); + usleep_range(1800, 2500); + ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val); if (ret < 0) { dev_err(dev, "Error: Reading chip id\n"); -- cgit v1.3-18-gd494 From 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 1 Sep 2016 11:44:35 +0200 Subject: iio: accel: kxsd9: Fix scaling bug All the scaling of the KXSD9 involves multiplication with a fraction number < 1. However the scaling value returned from IIO_INFO_SCALE was unpredictable as only the micros of the value was assigned, and not the integer part, resulting in scaling like this: $cat in_accel_scale -1057462640.011978 Fix this by assigning zero to the integer part. Cc: stable@vger.kernel.org Tested-by: Jonathan Cameron Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron --- drivers/iio/accel/kxsd9.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c index da5fb67ecb34..9d72d4bcf5e9 100644 --- a/drivers/iio/accel/kxsd9.c +++ b/drivers/iio/accel/kxsd9.c @@ -166,6 +166,7 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev, ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C)); if (ret < 0) goto error_ret; + *val = 0; *val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK]; ret = IIO_VAL_INT_PLUS_MICRO; break; -- cgit v1.3-18-gd494 From 4c3cb6e9a9d94d1553807854a565cd27ff4c22aa Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 3 Sep 2016 10:36:00 -0700 Subject: dax: fix mapping size check pgoff_to_phys() validates that both the starting address and the length of the mapping against the resource list. We need to check for a mapping size of PMD_SIZE not PAGE_SIZE in the pmd fault path. Signed-off-by: Dan Williams --- drivers/dax/dax.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dax/dax.c b/drivers/dax/dax.c index 803f3953b341..29f600f2c447 100644 --- a/drivers/dax/dax.c +++ b/drivers/dax/dax.c @@ -459,7 +459,7 @@ static int __dax_dev_pmd_fault(struct dax_dev *dax_dev, } pgoff = linear_page_index(vma, pmd_addr); - phys = pgoff_to_phys(dax_dev, pgoff, PAGE_SIZE); + phys = pgoff_to_phys(dax_dev, pgoff, PMD_SIZE); if (phys == -1) { dev_dbg(dev, "%s: phys_to_pgoff(%#lx) failed\n", __func__, pgoff); -- cgit v1.3-18-gd494 From 609e941a6bcd7ceb1cbb561941c997f6465e8698 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 1 Sep 2016 06:43:46 -0700 Subject: iw_cxgb4: call dev_put() on l2t allocation failure Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/infiniband/hw/cxgb4/cm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index a3a67216bce6..57b5bb56cdbf 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -2077,8 +2077,10 @@ static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip, } ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t, n, pdev, rt_tos2priority(tos)); - if (!ep->l2t) + if (!ep->l2t) { + dev_put(pdev); goto out; + } ep->mtu = pdev->mtu; ep->tx_chan = cxgb4_port_chan(pdev); ep->smac_idx = cxgb4_tp_smt_idx(adapter_type, -- cgit v1.3-18-gd494 From 37eb816c0867b1b0db273d22b530780a0a083980 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 1 Sep 2016 06:44:52 -0700 Subject: iw_cxgb4: block module unload until all ep resources are released Otherwise an endpoint can be still closing down causing a touch after free crash. Also WARN_ON if ulps have failed to destroy various resources during device removal. Fixes: ad61a4c7a9b7 ("iw_cxgb4: don't block in destroy_qp awaiting the last deref") Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/infiniband/hw/cxgb4/cm.c | 2 ++ drivers/infiniband/hw/cxgb4/device.c | 5 +++++ drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 1 + 3 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 57b5bb56cdbf..5621270664f4 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -314,6 +314,8 @@ static void remove_ep_tid(struct c4iw_ep *ep) spin_lock_irqsave(&ep->com.dev->lock, flags); _remove_handle(ep->com.dev, &ep->com.dev->hwtid_idr, ep->hwtid, 0); + if (idr_is_empty(&ep->com.dev->hwtid_idr)) + wake_up(&ep->com.dev->wait); spin_unlock_irqrestore(&ep->com.dev->lock, flags); } diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c index ae2e8b23d2dd..63561aa9c69e 100644 --- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -872,9 +872,13 @@ static void c4iw_rdev_close(struct c4iw_rdev *rdev) static void c4iw_dealloc(struct uld_ctx *ctx) { c4iw_rdev_close(&ctx->dev->rdev); + WARN_ON_ONCE(!idr_is_empty(&ctx->dev->cqidr)); idr_destroy(&ctx->dev->cqidr); + WARN_ON_ONCE(!idr_is_empty(&ctx->dev->qpidr)); idr_destroy(&ctx->dev->qpidr); + WARN_ON_ONCE(!idr_is_empty(&ctx->dev->mmidr)); idr_destroy(&ctx->dev->mmidr); + wait_event(ctx->dev->wait, idr_is_empty(&ctx->dev->hwtid_idr)); idr_destroy(&ctx->dev->hwtid_idr); idr_destroy(&ctx->dev->stid_idr); idr_destroy(&ctx->dev->atid_idr); @@ -992,6 +996,7 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop) mutex_init(&devp->rdev.stats.lock); mutex_init(&devp->db_mutex); INIT_LIST_HEAD(&devp->db_fc_list); + init_waitqueue_head(&devp->wait); devp->avail_ird = devp->rdev.lldi.max_ird_adapter; if (c4iw_debugfs_root) { diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index f6f34a75af27..0e9cd4479bb3 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -263,6 +263,7 @@ struct c4iw_dev { struct idr stid_idr; struct list_head db_fc_list; u32 avail_ird; + wait_queue_head_t wait; }; static inline struct c4iw_dev *to_c4iw_dev(struct ib_device *ibdev) -- cgit v1.3-18-gd494 From cdbecc8d24b642b67ae79a0acc2ff18d3d0e677e Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 1 Sep 2016 09:12:25 -0700 Subject: nvme_rdma: keep a ref on the ctrl during delete/flush Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index ab545fb347a0..15b0c1d025f5 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1351,9 +1351,15 @@ static int nvme_rdma_device_unplug(struct nvme_rdma_queue *queue) ret = 1; } - /* Queue controller deletion */ + /* + * Queue controller deletion. Keep a reference until all + * work is flushed since delete_work will free the ctrl mem + */ + kref_get(&ctrl->ctrl.kref); queue_work(nvme_rdma_wq, &ctrl->delete_work); flush_work(&ctrl->delete_work); + nvme_put_ctrl(&ctrl->ctrl); + return ret; } @@ -1700,15 +1706,19 @@ static int __nvme_rdma_del_ctrl(struct nvme_rdma_ctrl *ctrl) static int nvme_rdma_del_ctrl(struct nvme_ctrl *nctrl) { struct nvme_rdma_ctrl *ctrl = to_rdma_ctrl(nctrl); - int ret; + int ret = 0; + /* + * Keep a reference until all work is flushed since + * __nvme_rdma_del_ctrl can free the ctrl mem + */ + if (!kref_get_unless_zero(&ctrl->ctrl.kref)) + return -EBUSY; ret = __nvme_rdma_del_ctrl(ctrl); - if (ret) - return ret; - - flush_work(&ctrl->delete_work); - - return 0; + if (!ret) + flush_work(&ctrl->delete_work); + nvme_put_ctrl(&ctrl->ctrl); + return ret; } static void nvme_rdma_remove_ctrl_work(struct work_struct *work) -- cgit v1.3-18-gd494 From f361e5a01ed35c0f9a00816d76a910d8a5cb4547 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 2 Sep 2016 09:01:27 -0700 Subject: nvme-rdma: destroy nvme queue rdma resources on connect failure After address resolution, the nvme_rdma_queue rdma resources are allocated. If rdma route resolution or the connect fails, or the controller reconnect times out and gives up, then the rdma resources need to be freed. Otherwise, rdma resources are leaked. Reviewed-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 15b0c1d025f5..a9d43f09963f 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -82,6 +82,7 @@ struct nvme_rdma_request { enum nvme_rdma_queue_flags { NVME_RDMA_Q_CONNECTED = (1 << 0), + NVME_RDMA_IB_QUEUE_ALLOCATED = (1 << 1), }; struct nvme_rdma_queue { @@ -480,9 +481,14 @@ out_err: static void nvme_rdma_destroy_queue_ib(struct nvme_rdma_queue *queue) { - struct nvme_rdma_device *dev = queue->device; - struct ib_device *ibdev = dev->dev; + struct nvme_rdma_device *dev; + struct ib_device *ibdev; + if (!test_and_clear_bit(NVME_RDMA_IB_QUEUE_ALLOCATED, &queue->flags)) + return; + + dev = queue->device; + ibdev = dev->dev; rdma_destroy_qp(queue->cm_id); ib_free_cq(queue->ib_cq); @@ -533,6 +539,7 @@ static int nvme_rdma_create_queue_ib(struct nvme_rdma_queue *queue, ret = -ENOMEM; goto out_destroy_qp; } + set_bit(NVME_RDMA_IB_QUEUE_ALLOCATED, &queue->flags); return 0; @@ -590,6 +597,7 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl, return 0; out_destroy_cm_id: + nvme_rdma_destroy_queue_ib(queue); rdma_destroy_id(queue->cm_id); return ret; } @@ -652,7 +660,7 @@ static int nvme_rdma_init_io_queues(struct nvme_rdma_ctrl *ctrl) return 0; out_free_queues: - for (; i >= 1; i--) + for (i--; i >= 1; i--) nvme_rdma_stop_and_free_queue(&ctrl->queues[i]); return ret; -- cgit v1.3-18-gd494 From 24b27fc4cdf9e10c5e79e5923b6b7c2c5c95096c Mon Sep 17 00:00:00 2001 From: Mahesh Bandewar Date: Thu, 1 Sep 2016 22:18:34 -0700 Subject: bonding: Fix bonding crash Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by: Mahesh Bandewar Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 7 ++++--- include/linux/netdevice.h | 1 + net/core/dev.c | 16 ++++++++++++++++ 3 files changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 217e8da0628c..9599ed6f1213 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1341,9 +1341,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) slave_dev->name); } - /* already enslaved */ - if (slave_dev->flags & IFF_SLAVE) { - netdev_dbg(bond_dev, "Error: Device was already enslaved\n"); + /* already in-use? */ + if (netdev_is_rx_handler_busy(slave_dev)) { + netdev_err(bond_dev, + "Error: Device is in use and cannot be enslaved\n"); return -EBUSY; } diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3a788bf0affd..e8d79d4ebcfe 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3267,6 +3267,7 @@ static inline void napi_free_frags(struct napi_struct *napi) napi->skb = NULL; } +bool netdev_is_rx_handler_busy(struct net_device *dev); int netdev_rx_handler_register(struct net_device *dev, rx_handler_func_t *rx_handler, void *rx_handler_data); diff --git a/net/core/dev.c b/net/core/dev.c index dd6ce598de89..ea6312057a71 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3974,6 +3974,22 @@ sch_handle_ingress(struct sk_buff *skb, struct packet_type **pt_prev, int *ret, return skb; } +/** + * netdev_is_rx_handler_busy - check if receive handler is registered + * @dev: device to check + * + * Check if a receive handler is already registered for a given device. + * Return true if there one. + * + * The caller must hold the rtnl_mutex. + */ +bool netdev_is_rx_handler_busy(struct net_device *dev) +{ + ASSERT_RTNL(); + return dev && rtnl_dereference(dev->rx_handler); +} +EXPORT_SYMBOL_GPL(netdev_is_rx_handler_busy); + /** * netdev_rx_handler_register - register receive handler * @dev: device to register a handler for -- cgit v1.3-18-gd494 From 9b4cdd516dadc1b68c55ba24520194a06adff10c Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 2 Sep 2016 13:37:11 +0200 Subject: vxlan: reject multicast destination without an interface Currently, kernel accepts configurations such as: ip l a type vxlan dstport 4789 id 1 group 239.192.0.1 ip l a type vxlan dstport 4789 id 1 group ff0e::110 However, neither of those really works. In the IPv4 case, the interface cannot be brought up ("RTNETLINK answers: No such device"). This is because multicast join will be rejected without the interface being specified. In the IPv6 case, multicast wil be joined on the first interface found. This is not what the user wants as it depends on random factors (order of interfaces). Note that it's possible to add a local address but it doesn't solve anything. For IPv4, it's not considered in the multicast join (thus the same error as above is returned on ifup). This could be added but it wouldn't help for IPv6 anyway. For IPv6, we do need the interface. Just reject a configuration that sets multicast address and does not provide an interface. Nobody can depend on the previous behavior as it never worked. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index c0dda6fc0921..6358e35d74b7 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2842,6 +2842,9 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, dev->mtu = lowerdev->mtu - (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); needed_headroom = lowerdev->hard_header_len; + } else if (vxlan_addr_multicast(&dst->remote_ip)) { + pr_info("multicast destination requires interface to be specified\n"); + return -EINVAL; } if (conf->mtu) { -- cgit v1.3-18-gd494 From 3555621de7fcceb79c4850f3d07d1ae4f652acf6 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Fri, 2 Sep 2016 13:37:12 +0200 Subject: vxlan: fix duplicated and wrong error messages vxlan_dev_configure outputs error messages before returning, no need to print again the same mesages in vxlan_newlink. Also, vxlan_dev_configure may return a particular error code for a different reason than vxlan_newlink thinks. Move the remaining error messages into vxlan_dev_configure and let vxlan_newlink just pass on the error code. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 35 +++++++++-------------------------- 1 file changed, 9 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 6358e35d74b7..6e65832051d6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2782,14 +2782,15 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, struct net_device *lowerdev = NULL; if (conf->flags & VXLAN_F_GPE) { - if (conf->flags & ~VXLAN_F_ALLOWED_GPE) - return -EINVAL; /* For now, allow GPE only together with COLLECT_METADATA. * This can be relaxed later; in such case, the other side * of the PtP link will have to be provided. */ - if (!(conf->flags & VXLAN_F_COLLECT_METADATA)) + if ((conf->flags & ~VXLAN_F_ALLOWED_GPE) || + !(conf->flags & VXLAN_F_COLLECT_METADATA)) { + pr_info("unsupported combination of extensions\n"); return -EINVAL; + } vxlan_raw_setup(dev); } else { @@ -2877,8 +2878,10 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, tmp->cfg.saddr.sa.sa_family == AF_INET6) == use_ipv6 && tmp->cfg.dst_port == vxlan->cfg.dst_port && (tmp->flags & VXLAN_F_RCV_FLAGS) == - (vxlan->flags & VXLAN_F_RCV_FLAGS)) - return -EEXIST; + (vxlan->flags & VXLAN_F_RCV_FLAGS)) { + pr_info("duplicate VNI %u\n", be32_to_cpu(conf->vni)); + return -EEXIST; + } } dev->ethtool_ops = &vxlan_ethtool_ops; @@ -2912,7 +2915,6 @@ static int vxlan_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct vxlan_config conf; - int err; memset(&conf, 0, sizeof(conf)); @@ -3021,26 +3023,7 @@ static int vxlan_newlink(struct net *src_net, struct net_device *dev, if (tb[IFLA_MTU]) conf.mtu = nla_get_u32(tb[IFLA_MTU]); - err = vxlan_dev_configure(src_net, dev, &conf); - switch (err) { - case -ENODEV: - pr_info("ifindex %d does not exist\n", conf.remote_ifindex); - break; - - case -EPERM: - pr_info("IPv6 is disabled via sysctl\n"); - break; - - case -EEXIST: - pr_info("duplicate VNI %u\n", be32_to_cpu(conf.vni)); - break; - - case -EINVAL: - pr_info("unsupported combination of extensions\n"); - break; - } - - return err; + return vxlan_dev_configure(src_net, dev, &conf); } static void vxlan_dellink(struct net_device *dev, struct list_head *head) -- cgit v1.3-18-gd494 From 4af9ed578a50cd331a725322cfd9d555251ce788 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 30 Aug 2016 12:41:37 +0200 Subject: efi: Fix handling error value in fdt_find_uefi_params of_get_flat_dt_subnode_by_name can return negative value in case of error. Assigning the result to unsigned variable and checking if the variable is lesser than zero is incorrect and always false. The patch fixes it by using signed variable to check the result. The problem has been detected using semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda Cc: Bartlomiej Zolnierkiewicz Cc: Marek Szyprowski Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Shawn Lin Cc: Mark Rutland Cc: Signed-off-by: Matt Fleming --- drivers/firmware/efi/efi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index 5a2631af7410..7dd2e2d37231 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -657,9 +657,12 @@ static int __init fdt_find_uefi_params(unsigned long node, const char *uname, } if (subnode) { - node = of_get_flat_dt_subnode_by_name(node, subnode); - if (node < 0) + int err = of_get_flat_dt_subnode_by_name(node, subnode); + + if (err < 0) return 0; + + node = err; } return __find_uefi_params(node, info, dt_params[i].params); -- cgit v1.3-18-gd494 From 9d7aba7786b6c9eec6d083e43fd639228c400c3a Mon Sep 17 00:00:00 2001 From: John Youn Date: Fri, 26 Aug 2016 18:43:01 -0700 Subject: Revert "usb: dwc3: gadget: always decrement by 1" This reverts commit 6f8245b4e37c ("usb: dwc3: gadget: always decrement by 1"). We can't always decrement this value. We should decrement only if the calculation of free slots results in a LINK TRB being among one of the free slots (dequeue < enqueue). Otherwise, if the LINK TRB is not among the free slots then it should not be decremented. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7a8d3d822b54..122e64df2f4d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -884,9 +884,12 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) return DWC3_TRB_NUM - 1; } - trbs_left = dep->trb_dequeue - dep->trb_enqueue - 1; + trbs_left = dep->trb_dequeue - dep->trb_enqueue; trbs_left &= (DWC3_TRB_NUM - 1); + if (dep->trb_dequeue < dep->trb_enqueue) + trbs_left--; + return trbs_left; } -- cgit v1.3-18-gd494 From b2f1eaaee564c5593c303f4d15d827924cb6d20d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 23 Aug 2016 21:11:13 +0900 Subject: usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON This driver should clear the bit. Otherwise, the VBUS will output wrongly if the usb port on a board has VBUS output capability. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 93a3bec81df7..fb8fc34827ab 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -106,6 +106,7 @@ /* DRD_CON */ #define DRD_CON_PERI_CON BIT(24) +#define DRD_CON_VBOUT BIT(0) /* USB_INT_ENA_1 and USB_INT_STA_1 */ #define USB_INT_1_B3_PLLWKUP BIT(31) @@ -363,6 +364,7 @@ static void usb3_init_epc_registers(struct renesas_usb3 *usb3) { /* FIXME: How to change host / peripheral mode as well? */ usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); usb3_write(usb3, ~0, USB3_USB_INT_STA_1); usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG); -- cgit v1.3-18-gd494 From 7c113f7df710df2aed63709815e518608dbd338c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 22 Aug 2016 22:45:36 -0300 Subject: usb: phy: phy-generic: Check clk_prepare_enable() error clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of failure. Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-generic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 980c9dee09eb..427efb5eebae 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -144,14 +144,18 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) int usb_gen_phy_init(struct usb_phy *phy) { struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); + int ret; if (!IS_ERR(nop->vcc)) { if (regulator_enable(nop->vcc)) dev_err(phy->dev, "Failed to enable power\n"); } - if (!IS_ERR(nop->clk)) - clk_prepare_enable(nop->clk); + if (!IS_ERR(nop->clk)) { + ret = clk_prepare_enable(nop->clk); + if (ret) + return ret; + } nop_reset(nop); -- cgit v1.3-18-gd494 From 519d8bd4b5d3d82c413eac5bb42b106bb4b9ec15 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 29 Aug 2016 18:00:38 +0900 Subject: usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Cc: # v3.8+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index d4be5d594896..28965ef4f824 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) if (usbhs_mod_is_host(priv)) usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + /* + * The driver should not clear the xxxSTS after the line of + * "call irq callback functions" because each "if" statement is + * possible to call the callback function for avoiding any side effects. + */ + if (irq_state.intsts0 & BRDY) + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); - usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); + if (irq_state.intsts0 & BEMP) + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions -- cgit v1.3-18-gd494 From dadb57abc37499f565b23933dbf49b435c3ba8af Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Mon, 29 Aug 2016 14:38:51 -0600 Subject: efi/libstub: Allocate headspace in efi_get_memory_map() efi_get_memory_map() allocates a buffer to store the memory map that it retrieves. This buffer may need to be reused by the client after ExitBootServices() is called, at which point allocations are not longer permitted. To support this usecase, provide the allocated buffer size back to the client, and allocate some additional headroom to account for any reasonable growth in the map that is likely to happen between the call to efi_get_memory_map() and the client reusing the buffer. Signed-off-by: Jeffrey Hugo Cc: Ard Biesheuvel Cc: Mark Rutland Cc: Leif Lindholm Cc: Ingo Molnar Cc: Signed-off-by: Matt Fleming --- arch/x86/boot/compressed/eboot.c | 20 ++++-- drivers/firmware/efi/libstub/efi-stub-helper.c | 96 ++++++++++++++++++-------- drivers/firmware/efi/libstub/fdt.c | 17 +++-- drivers/firmware/efi/libstub/random.c | 12 +++- include/linux/efi.h | 15 ++-- 5 files changed, 111 insertions(+), 49 deletions(-) (limited to 'drivers') diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index ff574dad95cc..c5b7c7b4f0d7 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1008,7 +1008,7 @@ static efi_status_t exit_boot(struct boot_params *boot_params, void *handle, bool is64) { struct efi_info *efi = &boot_params->efi_info; - unsigned long map_sz, key, desc_size; + unsigned long map_sz, key, desc_size, buff_size; efi_memory_desc_t *mem_map; struct setup_data *e820ext; const char *signature; @@ -1019,14 +1019,20 @@ static efi_status_t exit_boot(struct boot_params *boot_params, bool called_exit = false; u8 nr_entries; int i; - - nr_desc = 0; - e820ext = NULL; - e820ext_size = 0; + struct efi_boot_memmap map; + + nr_desc = 0; + e820ext = NULL; + e820ext_size = 0; + map.map = &mem_map; + map.map_size = &map_sz; + map.desc_size = &desc_size; + map.desc_ver = &desc_version; + map.key_ptr = &key; + map.buff_size = &buff_size; get_map: - status = efi_get_memory_map(sys_table, &mem_map, &map_sz, &desc_size, - &desc_version, &key); + status = efi_get_memory_map(sys_table, &map); if (status != EFI_SUCCESS) return status; diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 3bd127f95315..29368ac69221 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -41,6 +41,8 @@ static unsigned long __chunk_size = EFI_READ_CHUNK_SIZE; #define EFI_ALLOC_ALIGN EFI_PAGE_SIZE #endif +#define EFI_MMAP_NR_SLACK_SLOTS 8 + struct file_info { efi_file_handle_t *handle; u64 size; @@ -63,49 +65,62 @@ void efi_printk(efi_system_table_t *sys_table_arg, char *str) } } +static inline bool mmap_has_headroom(unsigned long buff_size, + unsigned long map_size, + unsigned long desc_size) +{ + unsigned long slack = buff_size - map_size; + + return slack / desc_size >= EFI_MMAP_NR_SLACK_SLOTS; +} + efi_status_t efi_get_memory_map(efi_system_table_t *sys_table_arg, - efi_memory_desc_t **map, - unsigned long *map_size, - unsigned long *desc_size, - u32 *desc_ver, - unsigned long *key_ptr) + struct efi_boot_memmap *map) { efi_memory_desc_t *m = NULL; efi_status_t status; unsigned long key; u32 desc_version; - *map_size = sizeof(*m) * 32; + *map->desc_size = sizeof(*m); + *map->map_size = *map->desc_size * 32; + *map->buff_size = *map->map_size; again: - /* - * Add an additional efi_memory_desc_t because we're doing an - * allocation which may be in a new descriptor region. - */ - *map_size += sizeof(*m); status = efi_call_early(allocate_pool, EFI_LOADER_DATA, - *map_size, (void **)&m); + *map->map_size, (void **)&m); if (status != EFI_SUCCESS) goto fail; - *desc_size = 0; + *map->desc_size = 0; key = 0; - status = efi_call_early(get_memory_map, map_size, m, - &key, desc_size, &desc_version); - if (status == EFI_BUFFER_TOO_SMALL) { + status = efi_call_early(get_memory_map, map->map_size, m, + &key, map->desc_size, &desc_version); + if (status == EFI_BUFFER_TOO_SMALL || + !mmap_has_headroom(*map->buff_size, *map->map_size, + *map->desc_size)) { efi_call_early(free_pool, m); + /* + * Make sure there is some entries of headroom so that the + * buffer can be reused for a new map after allocations are + * no longer permitted. Its unlikely that the map will grow to + * exceed this headroom once we are ready to trigger + * ExitBootServices() + */ + *map->map_size += *map->desc_size * EFI_MMAP_NR_SLACK_SLOTS; + *map->buff_size = *map->map_size; goto again; } if (status != EFI_SUCCESS) efi_call_early(free_pool, m); - if (key_ptr && status == EFI_SUCCESS) - *key_ptr = key; - if (desc_ver && status == EFI_SUCCESS) - *desc_ver = desc_version; + if (map->key_ptr && status == EFI_SUCCESS) + *map->key_ptr = key; + if (map->desc_ver && status == EFI_SUCCESS) + *map->desc_ver = desc_version; fail: - *map = m; + *map->map = m; return status; } @@ -113,13 +128,20 @@ fail: unsigned long get_dram_base(efi_system_table_t *sys_table_arg) { efi_status_t status; - unsigned long map_size; + unsigned long map_size, buff_size; unsigned long membase = EFI_ERROR; struct efi_memory_map map; efi_memory_desc_t *md; + struct efi_boot_memmap boot_map; - status = efi_get_memory_map(sys_table_arg, (efi_memory_desc_t **)&map.map, - &map_size, &map.desc_size, NULL, NULL); + boot_map.map = (efi_memory_desc_t **)&map.map; + boot_map.map_size = &map_size; + boot_map.desc_size = &map.desc_size; + boot_map.desc_ver = NULL; + boot_map.key_ptr = NULL; + boot_map.buff_size = &buff_size; + + status = efi_get_memory_map(sys_table_arg, &boot_map); if (status != EFI_SUCCESS) return membase; @@ -144,15 +166,22 @@ efi_status_t efi_high_alloc(efi_system_table_t *sys_table_arg, unsigned long size, unsigned long align, unsigned long *addr, unsigned long max) { - unsigned long map_size, desc_size; + unsigned long map_size, desc_size, buff_size; efi_memory_desc_t *map; efi_status_t status; unsigned long nr_pages; u64 max_addr = 0; int i; + struct efi_boot_memmap boot_map; + + boot_map.map = ↦ + boot_map.map_size = &map_size; + boot_map.desc_size = &desc_size; + boot_map.desc_ver = NULL; + boot_map.key_ptr = NULL; + boot_map.buff_size = &buff_size; - status = efi_get_memory_map(sys_table_arg, &map, &map_size, &desc_size, - NULL, NULL); + status = efi_get_memory_map(sys_table_arg, &boot_map); if (status != EFI_SUCCESS) goto fail; @@ -230,14 +259,21 @@ efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg, unsigned long size, unsigned long align, unsigned long *addr) { - unsigned long map_size, desc_size; + unsigned long map_size, desc_size, buff_size; efi_memory_desc_t *map; efi_status_t status; unsigned long nr_pages; int i; + struct efi_boot_memmap boot_map; + + boot_map.map = ↦ + boot_map.map_size = &map_size; + boot_map.desc_size = &desc_size; + boot_map.desc_ver = NULL; + boot_map.key_ptr = NULL; + boot_map.buff_size = &buff_size; - status = efi_get_memory_map(sys_table_arg, &map, &map_size, &desc_size, - NULL, NULL); + status = efi_get_memory_map(sys_table_arg, &boot_map); if (status != EFI_SUCCESS) goto fail; diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index e58abfa953cc..bec0fa8d8746 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -175,13 +175,21 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, unsigned long fdt_addr, unsigned long fdt_size) { - unsigned long map_size, desc_size; + unsigned long map_size, desc_size, buff_size; u32 desc_ver; unsigned long mmap_key; efi_memory_desc_t *memory_map, *runtime_map; unsigned long new_fdt_size; efi_status_t status; int runtime_entry_count = 0; + struct efi_boot_memmap map; + + map.map = &runtime_map; + map.map_size = &map_size; + map.desc_size = &desc_size; + map.desc_ver = &desc_ver; + map.key_ptr = &mmap_key; + map.buff_size = &buff_size; /* * Get a copy of the current memory map that we will use to prepare @@ -189,8 +197,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, * subsequent allocations adding entries, since they could not affect * the number of EFI_MEMORY_RUNTIME regions. */ - status = efi_get_memory_map(sys_table, &runtime_map, &map_size, - &desc_size, &desc_ver, &mmap_key); + status = efi_get_memory_map(sys_table, &map); if (status != EFI_SUCCESS) { pr_efi_err(sys_table, "Unable to retrieve UEFI memory map.\n"); return status; @@ -199,6 +206,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, pr_efi(sys_table, "Exiting boot services and installing virtual address map...\n"); + map.map = &memory_map; /* * Estimate size of new FDT, and allocate memory for it. We * will allocate a bigger buffer if this ends up being too @@ -218,8 +226,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, * we can get the memory map key needed for * exit_boot_services(). */ - status = efi_get_memory_map(sys_table, &memory_map, &map_size, - &desc_size, &desc_ver, &mmap_key); + status = efi_get_memory_map(sys_table, &map); if (status != EFI_SUCCESS) goto fail_free_new_fdt; diff --git a/drivers/firmware/efi/libstub/random.c b/drivers/firmware/efi/libstub/random.c index 53f6d3fe6d86..0c9f58c5ba50 100644 --- a/drivers/firmware/efi/libstub/random.c +++ b/drivers/firmware/efi/libstub/random.c @@ -73,12 +73,20 @@ efi_status_t efi_random_alloc(efi_system_table_t *sys_table_arg, unsigned long random_seed) { unsigned long map_size, desc_size, total_slots = 0, target_slot; + unsigned long buff_size; efi_status_t status; efi_memory_desc_t *memory_map; int map_offset; + struct efi_boot_memmap map; - status = efi_get_memory_map(sys_table_arg, &memory_map, &map_size, - &desc_size, NULL, NULL); + map.map = &memory_map; + map.map_size = &map_size; + map.desc_size = &desc_size; + map.desc_ver = NULL; + map.key_ptr = NULL; + map.buff_size = &buff_size; + + status = efi_get_memory_map(sys_table_arg, &map); if (status != EFI_SUCCESS) return status; diff --git a/include/linux/efi.h b/include/linux/efi.h index 23cd3ced8c1a..943fee524176 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -118,6 +118,15 @@ typedef struct { u32 imagesize; } efi_capsule_header_t; +struct efi_boot_memmap { + efi_memory_desc_t **map; + unsigned long *map_size; + unsigned long *desc_size; + u32 *desc_ver; + unsigned long *key_ptr; + unsigned long *buff_size; +}; + /* * EFI capsule flags */ @@ -1371,11 +1380,7 @@ char *efi_convert_cmdline(efi_system_table_t *sys_table_arg, efi_loaded_image_t *image, int *cmd_line_len); efi_status_t efi_get_memory_map(efi_system_table_t *sys_table_arg, - efi_memory_desc_t **map, - unsigned long *map_size, - unsigned long *desc_size, - u32 *desc_ver, - unsigned long *key_ptr); + struct efi_boot_memmap *map); efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg, unsigned long size, unsigned long align, -- cgit v1.3-18-gd494 From fc07716ba803483be91bc4b2344f9c84985e6f07 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Mon, 29 Aug 2016 14:38:52 -0600 Subject: efi/libstub: Introduce ExitBootServices helper The spec allows ExitBootServices to fail with EFI_INVALID_PARAMETER if a race condition has occurred where the EFI has updated the memory map after the stub grabbed a reference to the map. The spec defines a retry proceedure with specific requirements to handle this scenario. This scenario was previously observed on x86 - commit d3768d885c6c ("x86, efi: retry ExitBootServices() on failure") but the current fix is not spec compliant and the scenario is now observed on the Qualcomm Technologies QDF2432 via the FDT stub which does not handle the error and thus causes boot failures. The user will notice the boot failure as the kernel is not executed and the system may drop back to a UEFI shell, but will be unresponsive to input and the system will require a power cycle to recover. Add a helper to the stub library that correctly adheres to the spec in the case of EFI_INVALID_PARAMETER from ExitBootServices and can be universally used across all stub implementations. Signed-off-by: Jeffrey Hugo Cc: Ard Biesheuvel Cc: Mark Rutland Cc: Leif Lindholm Cc: Ingo Molnar Cc: Signed-off-by: Matt Fleming --- drivers/firmware/efi/libstub/efi-stub-helper.c | 73 ++++++++++++++++++++++++++ include/linux/efi.h | 10 ++++ 2 files changed, 83 insertions(+) (limited to 'drivers') diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 29368ac69221..aded10662020 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -740,3 +740,76 @@ char *efi_convert_cmdline(efi_system_table_t *sys_table_arg, *cmd_line_len = options_bytes; return (char *)cmdline_addr; } + +/* + * Handle calling ExitBootServices according to the requirements set out by the + * spec. Obtains the current memory map, and returns that info after calling + * ExitBootServices. The client must specify a function to perform any + * processing of the memory map data prior to ExitBootServices. A client + * specific structure may be passed to the function via priv. The client + * function may be called multiple times. + */ +efi_status_t efi_exit_boot_services(efi_system_table_t *sys_table_arg, + void *handle, + struct efi_boot_memmap *map, + void *priv, + efi_exit_boot_map_processing priv_func) +{ + efi_status_t status; + + status = efi_get_memory_map(sys_table_arg, map); + + if (status != EFI_SUCCESS) + goto fail; + + status = priv_func(sys_table_arg, map, priv); + if (status != EFI_SUCCESS) + goto free_map; + + status = efi_call_early(exit_boot_services, handle, *map->key_ptr); + + if (status == EFI_INVALID_PARAMETER) { + /* + * The memory map changed between efi_get_memory_map() and + * exit_boot_services(). Per the UEFI Spec v2.6, Section 6.4: + * EFI_BOOT_SERVICES.ExitBootServices we need to get the + * updated map, and try again. The spec implies one retry + * should be sufficent, which is confirmed against the EDK2 + * implementation. Per the spec, we can only invoke + * get_memory_map() and exit_boot_services() - we cannot alloc + * so efi_get_memory_map() cannot be used, and we must reuse + * the buffer. For all practical purposes, the headroom in the + * buffer should account for any changes in the map so the call + * to get_memory_map() is expected to succeed here. + */ + *map->map_size = *map->buff_size; + status = efi_call_early(get_memory_map, + map->map_size, + *map->map, + map->key_ptr, + map->desc_size, + map->desc_ver); + + /* exit_boot_services() was called, thus cannot free */ + if (status != EFI_SUCCESS) + goto fail; + + status = priv_func(sys_table_arg, map, priv); + /* exit_boot_services() was called, thus cannot free */ + if (status != EFI_SUCCESS) + goto fail; + + status = efi_call_early(exit_boot_services, handle, *map->key_ptr); + } + + /* exit_boot_services() was called, thus cannot free */ + if (status != EFI_SUCCESS) + goto fail; + + return EFI_SUCCESS; + +free_map: + efi_call_early(free_pool, *map->map); +fail: + return status; +} diff --git a/include/linux/efi.h b/include/linux/efi.h index 943fee524176..0148a3046b48 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -1462,4 +1462,14 @@ extern void efi_call_virt_check_flags(unsigned long flags, const char *call); arch_efi_call_virt_teardown(); \ }) +typedef efi_status_t (*efi_exit_boot_map_processing)( + efi_system_table_t *sys_table_arg, + struct efi_boot_memmap *map, + void *priv); + +efi_status_t efi_exit_boot_services(efi_system_table_t *sys_table, + void *handle, + struct efi_boot_memmap *map, + void *priv, + efi_exit_boot_map_processing priv_func); #endif /* _LINUX_EFI_H */ -- cgit v1.3-18-gd494 From ed9cc156c42ff0c0bf9b1d09df48a12bf0873473 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Mon, 29 Aug 2016 14:38:53 -0600 Subject: efi/libstub: Use efi_exit_boot_services() in FDT The FDT code directly calls ExitBootServices. This is inadvisable as the UEFI spec details a complex set of errors, race conditions, and API interactions that the caller of ExitBootServices must get correct. The FDT code does not handle EFI_INVALID_PARAMETER as required by the spec, which causes intermittent boot failures on the Qualcomm Technologies QDF2432. Call the efi_exit_boot_services() helper intead, which handles the EFI_INVALID_PARAMETER scenario properly. Signed-off-by: Jeffrey Hugo Cc: Ard Biesheuvel Cc: Mark Rutland Cc: Leif Lindholm Cc: Ingo Molnar Cc: Signed-off-by: Matt Fleming --- drivers/firmware/efi/libstub/fdt.c | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c index bec0fa8d8746..a6a93116a8f0 100644 --- a/drivers/firmware/efi/libstub/fdt.c +++ b/drivers/firmware/efi/libstub/fdt.c @@ -152,6 +152,27 @@ fdt_set_fail: #define EFI_FDT_ALIGN EFI_PAGE_SIZE #endif +struct exit_boot_struct { + efi_memory_desc_t *runtime_map; + int *runtime_entry_count; +}; + +static efi_status_t exit_boot_func(efi_system_table_t *sys_table_arg, + struct efi_boot_memmap *map, + void *priv) +{ + struct exit_boot_struct *p = priv; + /* + * Update the memory map with virtual addresses. The function will also + * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME + * entries so that we can pass it straight to SetVirtualAddressMap() + */ + efi_get_virtmap(*map->map, *map->map_size, *map->desc_size, + p->runtime_map, p->runtime_entry_count); + + return EFI_SUCCESS; +} + /* * Allocate memory for a new FDT, then add EFI, commandline, and * initrd related fields to the FDT. This routine increases the @@ -183,6 +204,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, efi_status_t status; int runtime_entry_count = 0; struct efi_boot_memmap map; + struct exit_boot_struct priv; map.map = &runtime_map; map.map_size = &map_size; @@ -257,16 +279,11 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table, } } - /* - * Update the memory map with virtual addresses. The function will also - * populate @runtime_map with copies of just the EFI_MEMORY_RUNTIME - * entries so that we can pass it straight into SetVirtualAddressMap() - */ - efi_get_virtmap(memory_map, map_size, desc_size, runtime_map, - &runtime_entry_count); - - /* Now we are ready to exit_boot_services.*/ - status = sys_table->boottime->exit_boot_services(handle, mmap_key); + sys_table->boottime->free_pool(memory_map); + priv.runtime_map = runtime_map; + priv.runtime_entry_count = &runtime_entry_count; + status = efi_exit_boot_services(sys_table, handle, &map, &priv, + exit_boot_func); if (status == EFI_SUCCESS) { efi_set_virtual_address_map_t *svam; -- cgit v1.3-18-gd494 From 5dba4b14bafe801083d01e1f400816df7e5a8f2e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 5 Sep 2016 15:39:06 +0100 Subject: iio: ensure ret is initialized to zero before entering do loop A recent fix to iio_buffer_read_first_n_outer removed ret from being set by a return from wait_event_interruptible and also added a continue in a loop which causes the variable ret to not be set when it reaches the end of the loop. Fix this by initializing ret to zero. Also remove extraneous white space at the end of the loop. Fixes: fcf68f3c0bb2a5 ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING") Signed-off-by: Colin Ian King Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-buffer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index 49bf9c59f117..158aaf44dd95 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -110,7 +110,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf, DEFINE_WAIT_FUNC(wait, woken_wake_function); size_t datum_size; size_t to_wait; - int ret; + int ret = 0; if (!indio_dev->info) return -ENODEV; @@ -153,7 +153,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf, ret = rb->access->read_first_n(rb, n, buf); if (ret == 0 && (filp->f_flags & O_NONBLOCK)) ret = -EAGAIN; - } while (ret == 0); + } while (ret == 0); remove_wait_queue(&rb->pollq, &wait); return ret; -- cgit v1.3-18-gd494 From 171c0091837c81ed5c949fec6966bb5afff2d1cf Mon Sep 17 00:00:00 2001 From: Gregor Boirie Date: Fri, 2 Sep 2016 20:27:46 +0200 Subject: iio:core: fix IIO_VAL_FRACTIONAL sign handling 7985e7c100 ("iio: Introduce a new fractional value type") introduced a new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers expressed by a numerator and denominator combination. Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This fails handling negative values properly since parameters are reevaluated as unsigned values. Fix this by using div_s64_rem() instead. Computed integer part will carry properly signed value. Formatted fractional part will always be positive. Fixes: 7985e7c100 ("iio: Introduce a new fractional value type") Signed-off-by: Gregor Boirie Reviewed-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/industrialio-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index f914d5d140e4..d2b889918c3e 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -613,9 +613,8 @@ ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals) return sprintf(buf, "%d.%09u\n", vals[0], vals[1]); case IIO_VAL_FRACTIONAL: tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]); - vals[1] = do_div(tmp, 1000000000LL); - vals[0] = tmp; - return sprintf(buf, "%d.%09u\n", vals[0], vals[1]); + vals[0] = (int)div_s64_rem(tmp, 1000000000, &vals[1]); + return sprintf(buf, "%d.%09u\n", vals[0], abs(vals[1])); case IIO_VAL_FRACTIONAL_LOG2: tmp = (s64)vals[0] * 1000000000LL >> vals[1]; vals[1] = do_div(tmp, 1000000000LL); -- cgit v1.3-18-gd494 From 3ff488ab6000f1338684b227c499450317519cc1 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 5 Sep 2016 16:37:12 +0100 Subject: usb: gadget: prevent potenial null pointer dereference on skb->len An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen Signed-off-by: Colin Ian King Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_eem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index 8741fd740174..007ec6e4a5d4 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -342,7 +342,7 @@ static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) struct sk_buff *skb2 = NULL; struct usb_ep *in = port->in_ep; int headroom, tailroom, padlen = 0; - u16 len = skb->len; + u16 len; if (!skb) return NULL; -- cgit v1.3-18-gd494 From 87260d3f7aecba9a5fadc6886c338b2a8fccfca9 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Thu, 21 Apr 2016 12:24:55 +0200 Subject: thermal: rcar_thermal: Fix priv->zone error handling In case thermal_zone_xxx_register() returns an error, priv->zone isn't NULL any more, but contains the error code. This is passed to thermal_zone_device_unregister(), then. This checks for priv->zone being NULL, but the error code is != NULL. So it works with the error code as a pointer. Crashing immediately. To fix this, reset priv->zone to NULL before entering rcar_gen3_thermal_remove(). Signed-off-by: Dirk Behme Reviewed-by: Geert Uytterhoeven Signed-off-by: Zhang Rui --- drivers/thermal/rcar_thermal.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index 71a339271fa5..5f817923f374 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -504,6 +504,7 @@ static int rcar_thermal_probe(struct platform_device *pdev) if (IS_ERR(priv->zone)) { dev_err(dev, "can't register thermal zone\n"); ret = PTR_ERR(priv->zone); + priv->zone = NULL; goto error_unregister; } -- cgit v1.3-18-gd494 From d31ed3f05763644840c654a384eaefa94c097ba2 Mon Sep 17 00:00:00 2001 From: Jan Leupold Date: Wed, 6 Jul 2016 13:22:35 +0200 Subject: drm: atmel-hlcdc: Fix vertical scaling The code is applying the same scaling for the X and Y components, thus making the scaling feature only functional when both components have the same scaling factor. Do the s/_w/_h/ replacement where appropriate to fix vertical scaling. Signed-off-by: Jan Leupold Fixes: 1a396789f65a2 ("drm: add Atmel HLCDC Display Controller support") Cc: Signed-off-by: Boris Brezillon --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c index 016c191221f3..52c527f6642a 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c @@ -320,19 +320,19 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane, u32 *coeff_tab = heo_upscaling_ycoef; u32 max_memsize; - if (state->crtc_w < state->src_w) + if (state->crtc_h < state->src_h) coeff_tab = heo_downscaling_ycoef; for (i = 0; i < ARRAY_SIZE(heo_upscaling_ycoef); i++) atmel_hlcdc_layer_update_cfg(&plane->layer, 33 + i, 0xffffffff, coeff_tab[i]); - factor = ((8 * 256 * state->src_w) - (256 * 4)) / - state->crtc_w; + factor = ((8 * 256 * state->src_h) - (256 * 4)) / + state->crtc_h; factor++; - max_memsize = ((factor * state->crtc_w) + (256 * 4)) / + max_memsize = ((factor * state->crtc_h) + (256 * 4)) / 2048; - if (max_memsize > state->src_w) + if (max_memsize > state->src_h) factor--; factor_reg |= (factor << 16) | 0x80000000; } -- cgit v1.3-18-gd494 From 1ba7db07ccc2825669d6e376632316813a072887 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 11 Jul 2016 12:19:40 +0200 Subject: drm/atmel-hlcdc: Make ->reset() implementation static The atmel_hlcdc_crtc_reset() function is never used outside the file and can be static. This avoids a warning from sparse. Signed-off-by: Thierry Reding --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index a978381ef95b..9b17a66cf0e1 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -387,7 +387,7 @@ void atmel_hlcdc_crtc_irq(struct drm_crtc *c) atmel_hlcdc_crtc_finish_page_flip(drm_crtc_to_atmel_hlcdc_crtc(c)); } -void atmel_hlcdc_crtc_reset(struct drm_crtc *crtc) +static void atmel_hlcdc_crtc_reset(struct drm_crtc *crtc) { struct atmel_hlcdc_crtc_state *state; -- cgit v1.3-18-gd494 From cd28e716c6869d2f06e64bcd679d0a45dd8a6295 Mon Sep 17 00:00:00 2001 From: Ping Gao Date: Tue, 6 Sep 2016 12:04:11 +0800 Subject: drm/i915: enable vGPU detection for all vGPU capability is handled by GVT-g host driver, not needed to put extra HW check for vGPU detection. And we'll actually support vGPU from BDW. Signed-off-by: Ping Gao Signed-off-by: Zhenyu Wang Reviewed-by: Joonas Lahtinen Acked-by: Chris Wilson Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-2-zhenyuw@linux.intel.com (cherry picked from commit 8ef89995c735f978d5dfcb3ca6bce70d41728c91) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_vgpu.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_vgpu.c b/drivers/gpu/drm/i915/i915_vgpu.c index f6acb5a0e701..b81cfb3b22ec 100644 --- a/drivers/gpu/drm/i915/i915_vgpu.c +++ b/drivers/gpu/drm/i915/i915_vgpu.c @@ -65,9 +65,6 @@ void i915_check_vgpu(struct drm_i915_private *dev_priv) BUILD_BUG_ON(sizeof(struct vgt_if) != VGT_PVINFO_SIZE); - if (!IS_HASWELL(dev_priv)) - return; - magic = __raw_i915_read64(dev_priv, vgtif_reg(magic)); if (magic != VGT_MAGIC) return; -- cgit v1.3-18-gd494 From 557b1a8cae25e36ac2f125d93f003e60a7d0d014 Mon Sep 17 00:00:00 2001 From: Zhi Wang Date: Tue, 6 Sep 2016 12:04:12 +0800 Subject: drm/i915: disable 48bit full PPGTT when vGPU is active Disable 48bit full PPGTT on vGPU too for now. Signed-off-by: Zhi Wang Signed-off-by: Zhenyu Wang Reviewed-by: Joonas Lahtinen Acked-by: Chris Wilson Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-3-zhenyuw@linux.intel.com (cherry picked from commit e320d40022128845dfff900422ea9fd69f576c98) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 7a30af79d799..f38ceffd82c3 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -122,8 +122,11 @@ int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv, has_full_48bit_ppgtt = IS_BROADWELL(dev_priv) || INTEL_GEN(dev_priv) >= 9; - if (intel_vgpu_active(dev_priv)) - has_full_ppgtt = false; /* emulation is too hard */ + if (intel_vgpu_active(dev_priv)) { + /* emulation is too hard */ + has_full_ppgtt = false; + has_full_48bit_ppgtt = false; + } if (!has_aliasing_ppgtt) return 0; @@ -158,7 +161,7 @@ int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv, return 0; } - if (INTEL_GEN(dev_priv) >= 8 && i915.enable_execlists) + if (INTEL_GEN(dev_priv) >= 8 && i915.enable_execlists && has_full_ppgtt) return has_full_48bit_ppgtt ? 3 : 2; else return has_aliasing_ppgtt ? 1 : 0; -- cgit v1.3-18-gd494 From 3c17648c2816f6d28bd2be9293032a2901994a36 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 6 Sep 2016 11:26:12 -0700 Subject: lkdtm: adjust usercopy tests to bypass const checks The hardened usercopy is now consistently avoiding checks against const sizes, since we really only want to perform runtime bounds checking on lengths that weren't known at build time. To test the hardened usercopy code, we must force the length arguments to be seen as non-const. Signed-off-by: Kees Cook --- drivers/misc/lkdtm_usercopy.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/lkdtm_usercopy.c b/drivers/misc/lkdtm_usercopy.c index 5525a204db93..1dd611423d8b 100644 --- a/drivers/misc/lkdtm_usercopy.c +++ b/drivers/misc/lkdtm_usercopy.c @@ -9,7 +9,15 @@ #include #include -static size_t cache_size = 1024; +/* + * Many of the tests here end up using const sizes, but those would + * normally be ignored by hardened usercopy, so force the compiler + * into choosing the non-const path to make sure we trigger the + * hardened usercopy checks by added "unconst" to all the const copies, + * and making sure "cache_size" isn't optimized into a const. + */ +static volatile size_t unconst = 0; +static volatile size_t cache_size = 1024; static struct kmem_cache *bad_cache; static const unsigned char test_text[] = "This is a test.\n"; @@ -67,14 +75,14 @@ static noinline void do_usercopy_stack(bool to_user, bool bad_frame) if (to_user) { pr_info("attempting good copy_to_user of local stack\n"); if (copy_to_user((void __user *)user_addr, good_stack, - sizeof(good_stack))) { + unconst + sizeof(good_stack))) { pr_warn("copy_to_user failed unexpectedly?!\n"); goto free_user; } pr_info("attempting bad copy_to_user of distant stack\n"); if (copy_to_user((void __user *)user_addr, bad_stack, - sizeof(good_stack))) { + unconst + sizeof(good_stack))) { pr_warn("copy_to_user failed, but lacked Oops\n"); goto free_user; } @@ -88,14 +96,14 @@ static noinline void do_usercopy_stack(bool to_user, bool bad_frame) pr_info("attempting good copy_from_user of local stack\n"); if (copy_from_user(good_stack, (void __user *)user_addr, - sizeof(good_stack))) { + unconst + sizeof(good_stack))) { pr_warn("copy_from_user failed unexpectedly?!\n"); goto free_user; } pr_info("attempting bad copy_from_user of distant stack\n"); if (copy_from_user(bad_stack, (void __user *)user_addr, - sizeof(good_stack))) { + unconst + sizeof(good_stack))) { pr_warn("copy_from_user failed, but lacked Oops\n"); goto free_user; } @@ -109,7 +117,7 @@ static void do_usercopy_heap_size(bool to_user) { unsigned long user_addr; unsigned char *one, *two; - const size_t size = 1024; + size_t size = unconst + 1024; one = kmalloc(size, GFP_KERNEL); two = kmalloc(size, GFP_KERNEL); @@ -285,13 +293,14 @@ void lkdtm_USERCOPY_KERNEL(void) pr_info("attempting good copy_to_user from kernel rodata\n"); if (copy_to_user((void __user *)user_addr, test_text, - sizeof(test_text))) { + unconst + sizeof(test_text))) { pr_warn("copy_to_user failed unexpectedly?!\n"); goto free_user; } pr_info("attempting bad copy_to_user from kernel text\n"); - if (copy_to_user((void __user *)user_addr, vm_mmap, PAGE_SIZE)) { + if (copy_to_user((void __user *)user_addr, vm_mmap, + unconst + PAGE_SIZE)) { pr_warn("copy_to_user failed, but lacked Oops\n"); goto free_user; } -- cgit v1.3-18-gd494 From 007e4ba3ee137f4700f39aa6dbaf01a71047c5f6 Mon Sep 17 00:00:00 2001 From: Helmut Buchsbaum Date: Sun, 4 Sep 2016 18:09:47 +0200 Subject: net: macb: initialize checksum when using checksum offloading I'm still struggling to get this fix right.. Changes since v2: - do not blindly modify SKB contents according to Dave's legitimate objection Changes since v1: - dropped disabling HW checksum offload for Zynq - initialize checksum similar to net/ethernet/freescale/fec_main.c -- >8 -- MACB/GEM needs the checksum field initialized to 0 to get correct results on transmit in all cases, e.g. on Zynq, UDP packets with payload <= 2 otherwise contain a wrong checksums. Signed-off-by: Helmut Buchsbaum Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 89c0cfa9719f..d954a97b0b0b 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -1323,6 +1323,24 @@ dma_error: return 0; } +static inline int macb_clear_csum(struct sk_buff *skb) +{ + /* no change for packets without checksum offloading */ + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + /* make sure we can modify the header */ + if (unlikely(skb_cow_head(skb, 0))) + return -1; + + /* initialize checksum field + * This is required - at least for Zynq, which otherwise calculates + * wrong UDP header checksums for UDP packets with UDP data len <=2 + */ + *(__sum16 *)(skb_checksum_start(skb) + skb->csum_offset) = 0; + return 0; +} + static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) { u16 queue_index = skb_get_queue_mapping(skb); @@ -1362,6 +1380,11 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } + if (macb_clear_csum(skb)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* Map socket buffer for DMA transfer */ if (!macb_tx_map(bp, queue, skb)) { dev_kfree_skb_any(skb); -- cgit v1.3-18-gd494 From daa7ee8dfa64233789221685e73a6ef8159f80de Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Sun, 4 Sep 2016 23:02:21 +0530 Subject: net: smsc: remove build warning of duplicate definition The build of m32r was giving warning: In file included from drivers/net/ethernet/smsc/smc91x.c:92:0: drivers/net/ethernet/smsc/smc91x.h:448:0: warning: "SMC_inb" redefined #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) drivers/net/ethernet/smsc/smc91x.h:106:0: note: this is the location of the previous definition #define SMC_inb(a, r) inb(((u32)a) + (r)) drivers/net/ethernet/smsc/smc91x.h:449:0: warning: "SMC_outb" redefined #define SMC_outb(x, ioaddr, reg) BUG() drivers/net/ethernet/smsc/smc91x.h:108:0: note: this is the location of the previous definition #define SMC_outb(v, a, r) outb(v, ((u32)a) + (r)) Signed-off-by: Sudip Mukherjee Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index e17671c9d1b0..ea8465467469 100644 --- a/drivers/net/ethernet/smsc/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h @@ -470,7 +470,9 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma, #endif #if ! SMC_CAN_USE_8BIT +#undef SMC_inb #define SMC_inb(ioaddr, reg) ({ BUG(); 0; }) +#undef SMC_outb #define SMC_outb(x, ioaddr, reg) BUG() #define SMC_insb(a, r, p, l) BUG() #define SMC_outsb(a, r, p, l) BUG() -- cgit v1.3-18-gd494 From 9d13744bb75078175ab49408f2abb980e4dbccc9 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 5 Sep 2016 01:57:35 -0400 Subject: bnxt_en: Fix TX push operation on ARM64. There is a code path where we are calling __iowrite64_copy() on an address that is not 64-bit aligned. This causes an exception on some architectures such as arm64. Fix that code path by using __iowrite32_copy(). Reported-by: JD Zheng Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 2cf79100c9cb..228c964e709a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -353,8 +353,8 @@ static netdev_tx_t bnxt_start_xmit(struct sk_buff *skb, struct net_device *dev) push_len = (length + sizeof(*tx_push) + 7) / 8; if (push_len > 16) { __iowrite64_copy(txr->tx_doorbell, tx_push_buf, 16); - __iowrite64_copy(txr->tx_doorbell + 4, tx_push_buf + 1, - push_len - 16); + __iowrite32_copy(txr->tx_doorbell + 4, tx_push_buf + 1, + (push_len - 16) << 1); } else { __iowrite64_copy(txr->tx_doorbell, tx_push_buf, push_len); -- cgit v1.3-18-gd494 From 696118c016dd5f5caaa05360f13f8acd8fb9d1a7 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 7 Sep 2016 13:39:37 +0300 Subject: usb: dwc3: pci: fix build warning on !PM_SLEEP When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann Acked-by: Arnd Bergmann Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 0a32430f4c41..6df0f5dad9a4 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -249,7 +249,9 @@ static int dwc3_pci_runtime_resume(struct device *dev) return pm_runtime_get(&dwc3->dev); } +#endif /* CONFIG_PM */ +#ifdef CONFIG_PM_SLEEP static int dwc3_pci_pm_dummy(struct device *dev) { /* @@ -262,7 +264,7 @@ static int dwc3_pci_pm_dummy(struct device *dev) */ return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static struct dev_pm_ops dwc3_pci_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy) -- cgit v1.3-18-gd494 From e34f2ff40e0339f6a379e1ecf49e8f2759056453 Mon Sep 17 00:00:00 2001 From: Giedrius Statkevičius Date: Thu, 1 Sep 2016 20:47:02 +0300 Subject: ath9k: bring back direction setting in ath9k_{start_stop} MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan Cc: Kalle Valo Cc: # 4.7+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6ca4337a98c4..7cb65c303f8d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw) if (!ath_complete_reset(sc, false)) ah->reset_power_on = false; - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 1 : 0); + ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + } /* * Reset key cache to sane defaults (all entries cleared) instead of @@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); + ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL); + } ath_prepare_reset(sc); -- cgit v1.3-18-gd494 From ded89912156b1a47d940a0c954c43afbabd0c42c Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Mon, 5 Sep 2016 10:45:47 +0100 Subject: brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap() User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Cc: stable@vger.kernel.org # v4.7 Reported-by: Daxing Guo Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 5db56a74e7df..b8aec5e5ef93 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4527,7 +4527,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, (u8 *)&settings->beacon.head[ie_offset], settings->beacon.head_len - ie_offset, WLAN_EID_SSID); - if (!ssid_ie) + if (!ssid_ie || ssid_ie->len > IEEE80211_MAX_SSID_LEN) return -EINVAL; memcpy(ssid_le.SSID, ssid_ie->data, ssid_ie->len); -- cgit v1.3-18-gd494 From fc2780b66b15092ac68272644a522c1624c48547 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 26 Aug 2016 11:59:26 +0100 Subject: drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the CI test machines, SNB also uses the GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE value to report a bad GEN6_PCODE_MIN_FREQ_TABLE request. [ 157.744641] WARNING: CPU: 5 PID: 9238 at drivers/gpu/drm/i915/intel_pm.c:7760 sandybridge_pcode_write+0x141/0x200 [i915] [ 157.744642] Missing switch case (16) in gen6_check_mailbox_status [ 157.744642] Modules linked in: snd_hda_intel i915 ax88179_178a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me lpc_ich snd_pcm mei broadcom bcm_phy_lib tg3 ptp pps_core [last unloaded: vgem] [ 157.744658] CPU: 5 PID: 9238 Comm: drv_hangman Tainted: G U W 4.8.0-rc3-CI-CI_DRM_1589+ #1 [ 157.744658] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 [ 157.744659] 0000000000000000 ffff88011f093a98 ffffffff81426415 ffff88011f093ae8 [ 157.744662] 0000000000000000 ffff88011f093ad8 ffffffff8107d2a6 00001e50810d3c9f [ 157.744663] ffff880128680000 0000000000000008 0000000000000000 ffff88012868a650 [ 157.744665] Call Trace: [ 157.744669] [] dump_stack+0x67/0x92 [ 157.744672] [] __warn+0xc6/0xe0 [ 157.744673] [] warn_slowpath_fmt+0x4a/0x50 [ 157.744685] [] sandybridge_pcode_write+0x141/0x200 [i915] [ 157.744697] [] intel_enable_gt_powersave+0x64a/0x1330 [i915] [ 157.744712] [] ? i9xx_emit_request+0x1b/0x80 [i915] [ 157.744725] [] __i915_add_request+0x1e3/0x370 [i915] [ 157.744738] [] i915_gem_do_execbuffer.isra.16+0xced/0x1b80 [i915] [ 157.744740] [] ? __might_fault+0x3e/0x90 [ 157.744752] [] i915_gem_execbuffer2+0xc2/0x2a0 [i915] [ 157.744753] [] drm_ioctl+0x207/0x4c0 [ 157.744765] [] ? i915_gem_execbuffer+0x360/0x360 [i915] [ 157.744767] [] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 157.744769] [] do_vfs_ioctl+0x8e/0x680 [ 157.744770] [] ? __might_fault+0x87/0x90 [ 157.744771] [] ? __might_fault+0x3e/0x90 [ 157.744773] [] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 157.744774] [] SyS_ioctl+0x3c/0x70 [ 157.744776] [] entry_SYSCALL_64_fastpath+0x1c/0xac Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97491 Fixes: 87660502f1a4 ("drm/i915/gen6+: Interpret mailbox error flags") Signed-off-by: Chris Wilson Cc: Lyude Cc: Matt Roper Cc: Maarten Lankhorst Cc: Daniel Vetter Cc: Ville Syrjälä Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/20160826105926.3413-1-chris@chris-wilson.co.uk Acked-by: Mika Kuoppala (cherry picked from commit 7850d1c35344c7bd6a357240f2f9f60fc2c097b5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 53e13c10e4ea..2d2481392824 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -7859,6 +7859,7 @@ static inline int gen6_check_mailbox_status(struct drm_i915_private *dev_priv) case GEN6_PCODE_ILLEGAL_CMD: return -ENXIO; case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: + case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: return -EOVERFLOW; case GEN6_PCODE_TIMEOUT: return -ETIMEDOUT; -- cgit v1.3-18-gd494 From 82469c59d222f839ded5cd282172258e026f9112 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Tue, 6 Sep 2016 17:39:13 -0300 Subject: nvme: Don't suspend admin queue that wasn't created This fixes a regression in my previous commit c21377f8366c ("nvme: Suspend all queues before deletion"), which provoked an Oops in the removal path when removing a device that became IO incapable very early at probe (i.e. after a failed EEH recovery). Turns out, if the error occurred very early at the probe path, before even configuring the admin queue, we might try to suspend the uninitialized admin queue, accessing bad memory. Fixes: c21377f8366c ("nvme: Suspend all queues before deletion") Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Jay Freyensee Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 8dcf5a960951..be84a84a40f7 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1693,7 +1693,12 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) nvme_suspend_queue(dev->queues[i]); if (csts & NVME_CSTS_CFS || !(csts & NVME_CSTS_RDY)) { - nvme_suspend_queue(dev->queues[0]); + /* A device might become IO incapable very soon during + * probe, before the admin queue is configured. Thus, + * queue_count can be 0 here. + */ + if (dev->queue_count) + nvme_suspend_queue(dev->queues[0]); } else { nvme_disable_io_queues(dev); nvme_disable_admin_queue(dev, shutdown); -- cgit v1.3-18-gd494 From c6c864993d9a20f8d7cacb4feaac5c46a2f2e4db Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 24 Aug 2016 13:51:33 +0200 Subject: Revert "gpio: include in gpiolib-of" This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 75e7b3919ea7..a28feb3edf33 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include -- cgit v1.3-18-gd494 From 60f749f8e4cfdfffa5f29c966050ed680eeedac2 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 7 Sep 2016 23:13:20 +0200 Subject: gpio: mcp23s08: make driver depend on OF_GPIO The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein Cc: Phil Reid Reported-by: kbuild test robot Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-mcp23s08.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 66a94103798b..24caedb00a7a 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1131,6 +1131,7 @@ menu "SPI or I2C GPIO expanders" config GPIO_MCP23S08 tristate "Microchip MCP23xxx I/O expander" + depends on OF_GPIO select GPIOLIB_IRQCHIP help SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017 diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index ac22efc1840e..99d37b56c258 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -564,7 +564,7 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, mcp->chip.direction_output = mcp23s08_direction_output; mcp->chip.set = mcp23s08_set; mcp->chip.dbg_show = mcp23s08_dbg_show; -#ifdef CONFIG_OF +#ifdef CONFIG_OF_GPIO mcp->chip.of_gpio_n_cells = 2; mcp->chip.of_node = dev->of_node; #endif -- cgit v1.3-18-gd494 From 56beac95cb88c188d2a885825a5da131edb41fe3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 29 Aug 2016 11:24:10 +0100 Subject: gpio: sa1100: fix irq probing for ucb1x00 ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King Signed-off-by: Linus Walleij --- drivers/gpio/gpio-sa1100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c index 0c99e8fb9af3..8d8ee0ebf14c 100644 --- a/drivers/gpio/gpio-sa1100.c +++ b/drivers/gpio/gpio-sa1100.c @@ -155,7 +155,7 @@ static int sa1100_gpio_irqdomain_map(struct irq_domain *d, { irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip, handle_edge_irq); - irq_set_noprobe(irq); + irq_set_probe(irq); return 0; } -- cgit v1.3-18-gd494 From 1d3ef9c2dc699fcc09320a4b642e84eb3c038f26 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Mon, 5 Sep 2016 16:27:53 +0100 Subject: arm-cci: pmu: Fix typo in event name For one of the CCI events exposed under sysfs, "snoop" was typo'd as "snopp". Correct this such that users see the expected event name when enumerating events via sysfs. Cc: arm@kernel.org Acked-by: Mark Rutland Signed-off-by: Suzuki K Poulose Signed-off-by: Olof Johansson --- drivers/bus/arm-cci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 5755907f836f..ffa7c9dcbd7a 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -551,7 +551,7 @@ static struct attribute *cci5xx_pmu_event_attrs[] = { CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_wrq, 0xB), CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_cd_hs, 0xC), CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_rq_stall_addr_hazard, 0xD), - CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snopp_rq_stall_tt_full, 0xE), + CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_stall_tt_full, 0xE), CCI5xx_GLOBAL_EVENT_EXT_ATTR_ENTRY(cci_snoop_rq_tzmp1_prot, 0xF), NULL }; -- cgit v1.3-18-gd494 From bcf42aa60c2832510b9be0f30c090bfd35bb172d Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Wed, 7 Sep 2016 17:26:33 +0300 Subject: xhci: fix null pointer dereference in stop command timeout function The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index fd9fd12e4861..797137e26549 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -850,6 +850,10 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; + if (xhci->xhc_state & XHCI_STATE_REMOVING) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } if (xhci->xhc_state & XHCI_STATE_DYING) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but another timer marked " @@ -903,7 +907,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Calling usb_hc_died()"); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + usb_hc_died(xhci_to_hcd(xhci)); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "xHCI host controller is dead."); } -- cgit v1.3-18-gd494 From 9b41b92bbae6a4d3e1f3adde87864fd481037814 Mon Sep 17 00:00:00 2001 From: Allen Hung Date: Fri, 15 Jul 2016 17:42:22 +0800 Subject: dmi-id: don't free dev structure after calling device_register dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung Signed-off-by: Jean Delvare --- drivers/firmware/dmi-id.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index 94a58a082b99..44c01390d035 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -229,14 +229,14 @@ static int __init dmi_id_init(void) ret = device_register(dmi_dev); if (ret) - goto fail_free_dmi_dev; + goto fail_put_dmi_dev; return 0; -fail_free_dmi_dev: - kfree(dmi_dev); -fail_class_unregister: +fail_put_dmi_dev: + put_device(dmi_dev); +fail_class_unregister: class_unregister(&dmi_class); return ret; -- cgit v1.3-18-gd494 From e35478eac030990e23a56bf11dc074c5a069124a Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 23 Aug 2016 17:28:03 +0200 Subject: i2c: mux: demux-pinctrl: run properly with multiple instances We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index b6b9d2582fac..b3893f6282ba 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -37,8 +37,6 @@ struct i2c_demux_pinctrl_priv { struct i2c_demux_pinctrl_chan chan[]; }; -static struct property status_okay = { .name = "status", .length = 3, .value = "ok" }; - static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct i2c_demux_pinctrl_priv *priv = adap->algo_data; @@ -193,6 +191,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct i2c_demux_pinctrl_priv *priv; + struct property *props; int num_chan, i, j, err; num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL); @@ -203,7 +202,10 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + num_chan * sizeof(struct i2c_demux_pinctrl_chan), GFP_KERNEL); - if (!priv) + + props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL); + + if (!priv || !props) return -ENOMEM; err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name); @@ -221,8 +223,12 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev) } priv->chan[i].parent_np = adap_np; + props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL); + props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL); + props[i].length = 3; + of_changeset_init(&priv->chan[i].chgset); - of_changeset_update_property(&priv->chan[i].chgset, adap_np, &status_okay); + of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]); } priv->num_chan = num_chan; -- cgit v1.3-18-gd494 From 015282c9eb6da05bfad6ff009078f91e06c0c98f Mon Sep 17 00:00:00 2001 From: Wenbo Wang Date: Thu, 8 Sep 2016 12:12:11 -0400 Subject: nvme/quirk: Add a delay before checking device ready for memblaze device Signed-off-by: Wenbo Wang Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index be84a84a40f7..60f7eab11865 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2117,6 +2117,8 @@ static const struct pci_device_id nvme_id_table[] = { .driver_data = NVME_QUIRK_IDENTIFY_CNS, }, { PCI_DEVICE(0x1c58, 0x0003), /* HGST adapter */ .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY, }, + { PCI_DEVICE(0x1c5f, 0x0540), /* Memblaze Pblaze4 adapter */ + .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001) }, { 0, } -- cgit v1.3-18-gd494 From 47a7b0d8888c04c9746812820b6e60553cc77bbc Mon Sep 17 00:00:00 2001 From: Guoqing Jiang Date: Sun, 4 Sep 2016 22:17:28 -0400 Subject: md-cluster: make md-cluster also can work when compiled into kernel The md-cluster is compiled as module by default, if it is compiled by built-in way, then we can't make md-cluster works. [64782.630008] md/raid1:md127: active with 2 out of 2 mirrors [64782.630528] md-cluster module not found. [64782.630530] md127: Could not setup cluster service (-2) Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions") Cc: stable@vger.kernel.org (v4.1+) Reported-by: Marc Smith Reviewed-by: NeilBrown Signed-off-by: Guoqing Jiang Signed-off-by: Shaohua Li --- drivers/md/md.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 67642bacd597..915e84d631a2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7610,16 +7610,12 @@ EXPORT_SYMBOL(unregister_md_cluster_operations); int md_setup_cluster(struct mddev *mddev, int nodes) { - int err; - - err = request_module("md-cluster"); - if (err) { - pr_err("md-cluster module not found.\n"); - return -ENOENT; - } - + if (!md_cluster_ops) + request_module("md-cluster"); spin_lock(&pers_lock); + /* ensure module won't be unloaded */ if (!md_cluster_ops || !try_module_get(md_cluster_mod)) { + pr_err("can't find md-cluster module or get it's reference.\n"); spin_unlock(&pers_lock); return -ENOENT; } -- cgit v1.3-18-gd494 From 664d58bf4d3406dc4404e29bcb8c89fd22589d57 Mon Sep 17 00:00:00 2001 From: Zhuo-hao Lee Date: Sat, 27 Aug 2016 15:39:30 +0800 Subject: i2c: designware: save the preset value of DW_IC_SDA_HOLD There are several ways to set the SDA hold time for i2c controller, including: Device Tree, built-in device properties and ACPI. However, if the SDA hold time is not specified by above method, we should read the value, where it is preset by firmware, and save it to sda_hold_time. This is needed because when i2c controller enters runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset default value. And during runtime resume, i2c_dw_init will be called to reconfigure i2c controller. If sda_hold_time is zero, the chipset default hold time will be used, that will be too short for some platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD value should be kept by sda_hold_time. Signed-off-by: Zhuo-hao Lee Reviewed-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index c6922b806fb7..fcd973d5131e 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -367,13 +367,17 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); /* Configure SDA Hold Time if required */ - if (dev->sda_hold_time) { - reg = dw_readl(dev, DW_IC_COMP_VERSION); - if (reg >= DW_IC_SDA_HOLD_MIN_VERS) + reg = dw_readl(dev, DW_IC_COMP_VERSION); + if (reg >= DW_IC_SDA_HOLD_MIN_VERS) { + if (dev->sda_hold_time) { dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); - else - dev_warn(dev->dev, - "Hardware too old to adjust SDA hold time."); + } else { + /* Keep previous hold time setting if no one set it */ + dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD); + } + } else { + dev_warn(dev->dev, + "Hardware too old to adjust SDA hold time.\n"); } /* Configure Tx/Rx FIFO threshold levels */ -- cgit v1.3-18-gd494 From e0603c8dd298171bd64227c65c6bbd6a861e1a78 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Aug 2016 11:38:48 +0200 Subject: i2c: Spelling s/acknowedge/acknowledge/ Signed-off-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cadence.c | 2 +- drivers/i2c/busses/i2c-rk3x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 90bbd9f9dd8f..3c16a2f7c673 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -767,7 +767,7 @@ static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id) * depending on the scaling direction. * * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK - * to acknowedge the change, NOTIFY_DONE if the notification is + * to acknowledge the change, NOTIFY_DONE if the notification is * considered irrelevant. */ static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 2bc8b01153d6..dce1abd43c7f 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -918,7 +918,7 @@ static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate) * Code adapted from i2c-cadence.c. * * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK - * to acknowedge the change, NOTIFY_DONE if the notification is + * to acknowledge the change, NOTIFY_DONE if the notification is * considered irrelevant. */ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long -- cgit v1.3-18-gd494 From cbfff439c54f37fc363b1d365183fa61af43585c Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 29 Aug 2016 14:22:36 -0700 Subject: i2c: rk3x: Restore clock settings at resume time Depending on a number of factors including: - Which exact Rockchip SoC we're working with - How deep we suspend - Which i2c port we're on We might lose the state of the i2c registers at suspend time. Specifically we've found that on rk3399 the i2c ports that are not in the PMU power domain lose their state with the current suspend depth configured by ARM Tursted Firmware. Note that there are very few actual i2c registers that aren't configured per transfer anyway so all we actually need to re-configure are the clock config registers. We'll just add a call to rk3x_i2c_adapt_div() at resume time and be done with it. NOTE: On rk3399 on ports whose power was lost, I put printouts in at resume time. I saw things like: before: con=0x00010300, div=0x00060006 after: con=0x00010200, div=0x00180025 Signed-off-by: Douglas Anderson Reviewed-by: David Wu Tested-by: David Wu [wsa: removed duplicate const] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rk3x.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index dce1abd43c7f..5c5b7cada8be 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -1111,6 +1111,15 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, return ret < 0 ? ret : num; } +static __maybe_unused int rk3x_i2c_resume(struct device *dev) +{ + struct rk3x_i2c *i2c = dev_get_drvdata(dev); + + rk3x_i2c_adapt_div(i2c, clk_get_rate(i2c->clk)); + + return 0; +} + static u32 rk3x_i2c_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING; @@ -1334,12 +1343,15 @@ static int rk3x_i2c_remove(struct platform_device *pdev) return 0; } +static SIMPLE_DEV_PM_OPS(rk3x_i2c_pm_ops, NULL, rk3x_i2c_resume); + static struct platform_driver rk3x_i2c_driver = { .probe = rk3x_i2c_probe, .remove = rk3x_i2c_remove, .driver = { .name = "rk3x-i2c", .of_match_table = rk3x_i2c_match, + .pm = &rk3x_i2c_pm_ops, }, }; -- cgit v1.3-18-gd494 From 0dbf657c3993a269fa0cd7dabbb9c02741d4aefa Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Wed, 7 Sep 2016 19:07:57 +0300 Subject: net/mlx5e: Fix xmit_more counter race issue Update the xmit_more counter before notifying the HW, to prevent a possible use-after-free of the skb. Fixes: c8cf78fe100b ("net/mlx5e: Add ethtool counter for TX xmit_more") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 988eca99ee0f..eb0e72537f10 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -356,6 +356,7 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.stopped++; } + sq->stats.xmit_more += skb->xmit_more; if (!skb->xmit_more || netif_xmit_stopped(sq->txq)) { int bf_sz = 0; @@ -375,7 +376,6 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb) sq->stats.packets++; sq->stats.bytes += num_bytes; - sq->stats.xmit_more += skb->xmit_more; return NETDEV_TX_OK; dma_unmap_wqe_err: -- cgit v1.3-18-gd494 From 7abc2110779b133e54ce681a4d0be3d89304eda1 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:07:59 +0300 Subject: net/mlx5e: Prevent casting overflow On 64 bits architectures unsigned long is longer than u32, casting to unsigned long will result in overflow. We need to first allocate an unsigned long variable, then assign the wanted value. Fixes: 665bc53969d7 ('net/mlx5e: Use new ethtool get/set link ksettings API') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index d0cf8fa22659..98e1a4a44268 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -659,9 +659,10 @@ out: static void ptys2ethtool_supported_link(unsigned long *supported_modes, u32 eth_proto_cap) { + unsigned long proto_cap = eth_proto_cap; int proto; - for_each_set_bit(proto, (unsigned long *)ð_proto_cap, MLX5E_LINK_MODES_NUMBER) + for_each_set_bit(proto, &proto_cap, MLX5E_LINK_MODES_NUMBER) bitmap_or(supported_modes, supported_modes, ptys2ethtool_table[proto].supported, __ETHTOOL_LINK_MODE_MASK_NBITS); @@ -670,9 +671,10 @@ static void ptys2ethtool_supported_link(unsigned long *supported_modes, static void ptys2ethtool_adver_link(unsigned long *advertising_modes, u32 eth_proto_cap) { + unsigned long proto_cap = eth_proto_cap; int proto; - for_each_set_bit(proto, (unsigned long *)ð_proto_cap, MLX5E_LINK_MODES_NUMBER) + for_each_set_bit(proto, &proto_cap, MLX5E_LINK_MODES_NUMBER) bitmap_or(advertising_modes, advertising_modes, ptys2ethtool_table[proto].advertised, __ETHTOOL_LINK_MODE_MASK_NBITS); -- cgit v1.3-18-gd494 From 4e39883d9c7426f8246ef86a32dc6a6f06f5aace Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:08:00 +0300 Subject: net/mlx5e: Fix global PFC counters replication Currently when reading global PFC statistics we left the counter iterator out of the equation and we ended up reading the same counter over and over again. Instead of reading the counter at index 0 on every iteration we now read the counter at index (i). Fixes: e989d5a532ce ('net/mlx5e: Expose flow control counters to ethtool') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 98e1a4a44268..7a346bb2ed00 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -331,7 +331,7 @@ static void mlx5e_get_ethtool_stats(struct net_device *dev, if (mlx5e_query_global_pause_combined(priv)) { for (i = 0; i < NUM_PPORT_PER_PRIO_PFC_COUNTERS; i++) { data[idx++] = MLX5E_READ_CTR64_BE(&priv->stats.pport.per_prio_counters[0], - pport_per_prio_pfc_stats_desc, 0); + pport_per_prio_pfc_stats_desc, i); } } -- cgit v1.3-18-gd494 From cd17d230dd060a12f7451c0caeedb3fd5158eaf9 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 7 Sep 2016 19:08:01 +0300 Subject: net/mlx5e: Fix parsing of vlan packets when updating lro header Currently vlan tagged packets were not parsed correctly and assumed to be regular IPv4/IPv6 packets. We should check for 802.1Q/802.1ad tags and update the lro header accordingly. This fixes the use case where LRO is on and rxvlan is off (vlan stripping is off). Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c index b6f8ebbdb487..e7c969df3dad 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c @@ -637,24 +637,32 @@ bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq) static void mlx5e_lro_update_hdr(struct sk_buff *skb, struct mlx5_cqe64 *cqe, u32 cqe_bcnt) { - struct ethhdr *eth = (struct ethhdr *)(skb->data); - struct iphdr *ipv4 = (struct iphdr *)(skb->data + ETH_HLEN); - struct ipv6hdr *ipv6 = (struct ipv6hdr *)(skb->data + ETH_HLEN); + struct ethhdr *eth = (struct ethhdr *)(skb->data); + struct iphdr *ipv4; + struct ipv6hdr *ipv6; struct tcphdr *tcp; + int network_depth = 0; + __be16 proto; + u16 tot_len; u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe); int tcp_ack = ((CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA == l4_hdr_type) || (CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA == l4_hdr_type)); - u16 tot_len = cqe_bcnt - ETH_HLEN; + skb->mac_len = ETH_HLEN; + proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth); - if (eth->h_proto == htons(ETH_P_IP)) { - tcp = (struct tcphdr *)(skb->data + ETH_HLEN + + ipv4 = (struct iphdr *)(skb->data + network_depth); + ipv6 = (struct ipv6hdr *)(skb->data + network_depth); + tot_len = cqe_bcnt - network_depth; + + if (proto == htons(ETH_P_IP)) { + tcp = (struct tcphdr *)(skb->data + network_depth + sizeof(struct iphdr)); ipv6 = NULL; skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; } else { - tcp = (struct tcphdr *)(skb->data + ETH_HLEN + + tcp = (struct tcphdr *)(skb->data + network_depth + sizeof(struct ipv6hdr)); ipv4 = NULL; skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; -- cgit v1.3-18-gd494 From 312fada1f9f87fb55ace4b5a55a70a9eea5100fd Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:35 +0100 Subject: nfp: remove linux/version.h includes Remove unnecessary version.h includes. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 1 - drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 1 - drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c | 1 - 3 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 88678c172b19..e4fe0f080f34 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -41,7 +41,6 @@ * Chris Telfer */ -#include #include #include #include diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index 7d7933d00b8f..4c9897220969 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -40,7 +40,6 @@ * Brad Petrus */ -#include #include #include #include diff --git a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c index 37abef016a0a..6f22b0e12ac7 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c @@ -38,7 +38,6 @@ * Rolf Neugebauer */ -#include #include #include #include -- cgit v1.3-18-gd494 From 313b345cbff566340022c82267a377e1e493ef90 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:36 +0100 Subject: nfp: drop support for old firmware ABIs Be more strict about FW versions. Drop support for old transitional revisions which were never used in production. Dropping support for FW ABI version 0.0.0.0 is particularly useful because 0 could just be uninitialized memory. Signed-off-by: Jakub Kicinski Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c index 6f22b0e12ac7..f7062cb648e1 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_netvf_main.c @@ -133,7 +133,7 @@ static int nfp_netvf_pci_probe(struct pci_dev *pdev, } nfp_net_get_fw_version(&fw_ver, ctrl_bar); - if (fw_ver.class != NFP_NET_CFG_VERSION_CLASS_GENERIC) { + if (fw_ver.resv || fw_ver.class != NFP_NET_CFG_VERSION_CLASS_GENERIC) { dev_err(&pdev->dev, "Unknown Firmware ABI %d.%d.%d.%d\n", fw_ver.resv, fw_ver.class, fw_ver.major, fw_ver.minor); err = -EINVAL; @@ -141,9 +141,7 @@ static int nfp_netvf_pci_probe(struct pci_dev *pdev, } /* Determine stride */ - if (nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 0) || - nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 1) || - nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0x12, 0x48)) { + if (nfp_net_fw_ver_eq(&fw_ver, 0, 0, 0, 1)) { stride = 2; tx_bar_no = NFP_NET_Q0_BAR; rx_bar_no = NFP_NET_Q1_BAR; -- cgit v1.3-18-gd494 From ebecefc820ec791a216382a68b937577bb69d3f7 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 7 Sep 2016 19:45:37 +0100 Subject: nfp: don't pad frames on receive There is no need to pad frames to ETH_ZLEN on RX. Signed-off-by: Jakub Kicinski Reviewed-by: Simon Horman Reviewed-by: Dinan Gunawardena Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index e4fe0f080f34..252e4924de0f 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -1440,10 +1440,6 @@ static int nfp_net_rx(struct nfp_net_rx_ring *rx_ring, int budget) nfp_net_set_hash(nn->netdev, skb, rxd); - /* Pad small frames to minimum */ - if (skb_put_padto(skb, 60)) - break; - /* Stats update */ u64_stats_update_begin(&r_vec->rx_sync); r_vec->rx_pkts++; -- cgit v1.3-18-gd494 From 6f3c4fb6d05e63c9c6d8968302491c3a5457be61 Mon Sep 17 00:00:00 2001 From: Clemens Gruber Date: Mon, 5 Sep 2016 19:29:58 +0200 Subject: usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase Problems with the signal integrity of the high speed USB data lines or noise on reference ground lines can cause the i.MX6 USB controller to violate USB specs and exhibit unexpected behavior. It was observed that USBi_UI interrupts were triggered first and when isr_setup_status_phase was called, ci->status was NULL, which lead to a NULL pointer dereference kernel panic. This patch fixes the kernel panic, emits a warning once and returns -EPIPE to halt the device and let the host get stalled. It also adds a comment to point people, who are experiencing this issue, to their USB hardware design. Cc: #4.1+ Signed-off-by: Clemens Gruber Signed-off-by: Peter Chen --- drivers/usb/chipidea/udc.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index dfec5a176315..b93356834bb5 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -949,6 +949,15 @@ static int isr_setup_status_phase(struct ci_hdrc *ci) int retval; struct ci_hw_ep *hwep; + /* + * Unexpected USB controller behavior, caused by bad signal integrity + * or ground reference problems, can lead to isr_setup_status_phase + * being called with ci->status equal to NULL. + * If this situation occurs, you should review your USB hardware design. + */ + if (WARN_ON_ONCE(!ci->status)) + return -EPIPE; + hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; ci->status->context = ci; ci->status->complete = isr_setup_status_complete; -- cgit v1.3-18-gd494 From a179b69359feb26ddb148bb6a2c0c53a8d1dc5be Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 24 Aug 2016 05:36:53 -0300 Subject: [media] cec: don't Feature Abort broadcast msgs when unregistered If the adapter is configured as 'Unregistered', then cec_receive_notify incorrectly thinks that broadcast messages are directed messages. The destination for broadcast messages is 0xf, and the logical address assigned to Unregistered devices is also 0xf and the logic didn't handle that correctly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-adap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-adap.c b/drivers/staging/media/cec/cec-adap.c index e980ac9c9279..946986f3ac0d 100644 --- a/drivers/staging/media/cec/cec-adap.c +++ b/drivers/staging/media/cec/cec-adap.c @@ -1409,7 +1409,6 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, u8 init_laddr = cec_msg_initiator(msg); u8 devtype = cec_log_addr2dev(adap, dest_laddr); int la_idx = cec_log_addr2idx(adap, dest_laddr); - bool is_directed = la_idx >= 0; bool from_unregistered = init_laddr == 0xf; struct cec_msg tx_cec_msg = { }; @@ -1571,7 +1570,7 @@ static int cec_receive_notify(struct cec_adapter *adap, struct cec_msg *msg, * Unprocessed messages are aborted if userspace isn't doing * any processing either. */ - if (is_directed && !is_reply && !adap->follower_cnt && + if (!is_broadcast && !is_reply && !adap->follower_cnt && !adap->cec_follower && msg->msg[1] != CEC_MSG_FEATURE_ABORT) return cec_feature_abort(adap, msg); break; -- cgit v1.3-18-gd494 From 60815d4a78204915f5cdf79a536bc96d5d23ae5f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 24 Aug 2016 07:17:22 -0300 Subject: [media] cec: fix ioctl return code when not registered Don't return the confusing -EIO error code when the device is not registered, instead return -ENODEV which is the proper thing to do in this situation. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/cec/cec-api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/media/cec/cec-api.c b/drivers/staging/media/cec/cec-api.c index 6f58ee85eea4..e274e2f22398 100644 --- a/drivers/staging/media/cec/cec-api.c +++ b/drivers/staging/media/cec/cec-api.c @@ -435,7 +435,7 @@ static long cec_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) void __user *parg = (void __user *)arg; if (!devnode->registered) - return -EIO; + return -ENODEV; switch (cmd) { case CEC_ADAP_G_CAPS: -- cgit v1.3-18-gd494 From c94455558337eece474eebb6a16b905f98930418 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 8 Sep 2016 10:43:58 -0700 Subject: raid5: fix a small race condition commit 5f9d1fde7d54a5(raid5: fix memory leak of bio integrity data) moves bio_reset to bio_endio. But it introduces a small race condition. It does bio_reset after raid5_release_stripe, which could make the stripe reusable and hence reuse the bio just before bio_reset. Moving bio_reset before raid5_release_stripe is called should fix the race. Reported-and-tested-by: Stefan Priebe - Profihost AG Signed-off-by: Shaohua Li --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b95c54c0e596..ee7fc3701700 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2423,10 +2423,10 @@ static void raid5_end_read_request(struct bio * bi) } } rdev_dec_pending(rdev, conf->mddev); + bio_reset(bi); clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); raid5_release_stripe(sh); - bio_reset(bi); } static void raid5_end_write_request(struct bio *bi) @@ -2498,6 +2498,7 @@ static void raid5_end_write_request(struct bio *bi) if (sh->batch_head && bi->bi_error && !replacement) set_bit(STRIPE_BATCH_ERR, &sh->batch_head->state); + bio_reset(bi); if (!test_and_clear_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags)) clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); @@ -2505,7 +2506,6 @@ static void raid5_end_write_request(struct bio *bi) if (sh->batch_head && sh != sh->batch_head) raid5_release_stripe(sh->batch_head); - bio_reset(bi); } static void raid5_build_block(struct stripe_head *sh, int i, int previous) -- cgit v1.3-18-gd494 From af7c1beccfd98bad752644dc14ea93805d65b2c9 Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Thu, 1 Sep 2016 19:02:57 +0800 Subject: virtio: mark vring_dma_dev() static We get 1 warning when building kernel with W=1: drivers/virtio/virtio_ring.c:170:16: warning: no previous prototype for 'vring_dma_dev' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie Acked-by: Arnd Bergmann Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index e383ecdaca59..ed9c9eeedfe5 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -167,7 +167,7 @@ static bool vring_use_dma_api(struct virtio_device *vdev) * making all of the arch DMA ops work on the vring device itself * is a mess. For now, we use the parent device for DMA ops. */ -struct device *vring_dma_dev(const struct vring_virtqueue *vq) +static struct device *vring_dma_dev(const struct vring_virtqueue *vq) { return vq->vq.vdev->dev.parent; } -- cgit v1.3-18-gd494 From 5e59d9a1aed26abcc79abe78af5cfd34e53cbe7f Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 30 Aug 2016 08:04:15 -0700 Subject: virtio_console: Stop doing DMA on the stack virtio_console uses a small DMA buffer for control requests. Move that buffer into heap memory. Doing virtio DMA on the stack is normally okay on non-DMA-API virtio systems (which is currently most of them), but it breaks completely if the stack is virtually mapped. Tested by typing both directions using picocom aimed at /dev/hvc0. Signed-off-by: Andy Lutomirski Signed-off-by: Michael S. Tsirkin Reviewed-by: Amit Shah --- drivers/char/virtio_console.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index d2406fe25533..5da47e26a012 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -165,6 +165,12 @@ struct ports_device { */ struct virtqueue *c_ivq, *c_ovq; + /* + * A control packet buffer for guest->host requests, protected + * by c_ovq_lock. + */ + struct virtio_console_control cpkt; + /* Array of per-port IO virtqueues */ struct virtqueue **in_vqs, **out_vqs; @@ -560,28 +566,29 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id, unsigned int event, unsigned int value) { struct scatterlist sg[1]; - struct virtio_console_control cpkt; struct virtqueue *vq; unsigned int len; if (!use_multiport(portdev)) return 0; - cpkt.id = cpu_to_virtio32(portdev->vdev, port_id); - cpkt.event = cpu_to_virtio16(portdev->vdev, event); - cpkt.value = cpu_to_virtio16(portdev->vdev, value); - vq = portdev->c_ovq; - sg_init_one(sg, &cpkt, sizeof(cpkt)); - spin_lock(&portdev->c_ovq_lock); - if (virtqueue_add_outbuf(vq, sg, 1, &cpkt, GFP_ATOMIC) == 0) { + + portdev->cpkt.id = cpu_to_virtio32(portdev->vdev, port_id); + portdev->cpkt.event = cpu_to_virtio16(portdev->vdev, event); + portdev->cpkt.value = cpu_to_virtio16(portdev->vdev, value); + + sg_init_one(sg, &portdev->cpkt, sizeof(struct virtio_console_control)); + + if (virtqueue_add_outbuf(vq, sg, 1, &portdev->cpkt, GFP_ATOMIC) == 0) { virtqueue_kick(vq); while (!virtqueue_get_buf(vq, &len) && !virtqueue_is_broken(vq)) cpu_relax(); } + spin_unlock(&portdev->c_ovq_lock); return 0; } -- cgit v1.3-18-gd494 From ea90383837334bcebe842e719ad4d8c966f4ef51 Mon Sep 17 00:00:00 2001 From: Baoyou Xie Date: Thu, 8 Sep 2016 19:03:20 +0800 Subject: drm/vc4: mark vc4_bo_cache_purge() static We get 1 warning when building kernel with W=1: drivers/gpu/drm/vc4/vc4_bo.c:147:6: warning: no previous prototype for 'vc4_bo_cache_purge' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by: Baoyou Xie Signed-off-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_bo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_bo.c b/drivers/gpu/drm/vc4/vc4_bo.c index 59adcf8532dd..3f6704cf6608 100644 --- a/drivers/gpu/drm/vc4/vc4_bo.c +++ b/drivers/gpu/drm/vc4/vc4_bo.c @@ -144,7 +144,7 @@ static struct list_head *vc4_get_cache_list_for_size(struct drm_device *dev, return &vc4->bo_cache.size_list[page_index]; } -void vc4_bo_cache_purge(struct drm_device *dev) +static void vc4_bo_cache_purge(struct drm_device *dev) { struct vc4_dev *vc4 = to_vc4_dev(dev); -- cgit v1.3-18-gd494 From 40d259045500c6431633f215516c1f94bac8c62f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 8 Sep 2016 08:16:01 +0200 Subject: mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init When neigh_init fails, we have to do proper cleanup including router_fini call. Fixes: 6cf3c971dc84cb ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 352259b3c38a..3f5c51da6d3e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1517,7 +1517,14 @@ int mlxsw_sp_router_init(struct mlxsw_sp *mlxsw_sp) return err; mlxsw_sp_lpm_init(mlxsw_sp); mlxsw_sp_vrs_init(mlxsw_sp); - return mlxsw_sp_neigh_init(mlxsw_sp); + err = mlxsw_sp_neigh_init(mlxsw_sp); + if (err) + goto err_neigh_init; + return 0; + +err_neigh_init: + __mlxsw_sp_router_fini(mlxsw_sp); + return err; } void mlxsw_sp_router_fini(struct mlxsw_sp *mlxsw_sp) -- cgit v1.3-18-gd494 From 3247ff2b318f3eeaaf32163ce39ddaac23e9a6f9 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 8 Sep 2016 08:16:02 +0200 Subject: mlxsw: spectrum: Set port type before setting its address During port init, we currently set the port's type to Ethernet after setting its MAC address. However, the hardware documentation states this should be the other way around. Align the driver with the hardware documentation and set the port's MAC address after setting its type. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index e16b34718c8c..d48873bcbddf 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2106,6 +2106,13 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, dev->netdev_ops = &mlxsw_sp_port_netdev_ops; dev->ethtool_ops = &mlxsw_sp_port_ethtool_ops; + err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0); + if (err) { + dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n", + mlxsw_sp_port->local_port); + goto err_port_swid_set; + } + err = mlxsw_sp_port_dev_addr_init(mlxsw_sp_port); if (err) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Unable to init port mac address\n", @@ -2131,13 +2138,6 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, goto err_port_system_port_mapping_set; } - err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0); - if (err) { - dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n", - mlxsw_sp_port->local_port); - goto err_port_swid_set; - } - err = mlxsw_sp_port_speed_by_width_set(mlxsw_sp_port, width); if (err) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to enable speeds\n", @@ -2219,10 +2219,10 @@ err_port_buffers_init: err_port_admin_status_set: err_port_mtu_set: err_port_speed_by_width_set: - mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT); -err_port_swid_set: err_port_system_port_mapping_set: err_dev_addr_init: + mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT); +err_port_swid_set: free_percpu(mlxsw_sp_port->pcpu_stats); err_alloc_stats: kfree(mlxsw_sp_port->untagged_vlans); -- cgit v1.3-18-gd494 From 2e21807d4b131dfd4a8e5c82116a85b62f28aeec Mon Sep 17 00:00:00 2001 From: Vishal Verma Date: Fri, 2 Sep 2016 17:27:30 -0600 Subject: nfit, mce: Fix SPA matching logic in MCE handler The check for a 'pmem' type SPA in the MCE handler was inverted due to a merge/rebase error. Fixes: 6839a6d nfit: do an ARS scrub on hitting a latent media error Cc: linux-acpi@vger.kernel.org Cc: Dan Williams Signed-off-by: Vishal Verma Signed-off-by: Dan Williams --- drivers/acpi/nfit/mce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/nfit/mce.c b/drivers/acpi/nfit/mce.c index 4c745bf389fe..161f91539ae6 100644 --- a/drivers/acpi/nfit/mce.c +++ b/drivers/acpi/nfit/mce.c @@ -42,7 +42,7 @@ static int nfit_handle_mce(struct notifier_block *nb, unsigned long val, list_for_each_entry(nfit_spa, &acpi_desc->spas, list) { struct acpi_nfit_system_address *spa = nfit_spa->spa; - if (nfit_spa_type(spa) == NFIT_SPA_PM) + if (nfit_spa_type(spa) != NFIT_SPA_PM) continue; /* find the spa that covers the mce addr */ if (spa->address > mce->addr) -- cgit v1.3-18-gd494 From 1e8b8d9619f9476e94f32eb20cab000d50d236aa Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 9 Sep 2016 09:10:08 -0700 Subject: libnvdimm: allow legacy (e820) pmem region to clear bad blocks Bad blocks can be injected via /sys/block/pmemN/badblocks. In a situation where legacy pmem is being used or a pmem region created by using memmap kernel parameter, the injected bad blocks are not cleared due to nvdimm_clear_poison() failing from lack of ndctl function pointer. In this case we need to just return as handled and allow the bad blocks to be cleared rather than fail. Reviewed-by: Vishal Verma Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- drivers/nvdimm/bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c index 458daf927336..935866fe5ec2 100644 --- a/drivers/nvdimm/bus.c +++ b/drivers/nvdimm/bus.c @@ -185,8 +185,12 @@ long nvdimm_clear_poison(struct device *dev, phys_addr_t phys, return -ENXIO; nd_desc = nvdimm_bus->nd_desc; + /* + * if ndctl does not exist, it's PMEM_LEGACY and + * we want to just pretend everything is handled. + */ if (!nd_desc->ndctl) - return -ENXIO; + return len; memset(&ars_cap, 0, sizeof(ars_cap)); ars_cap.address = phys; -- cgit v1.3-18-gd494 From 47b02f7294a483387772a46931da942b2ca9d845 Mon Sep 17 00:00:00 2001 From: Lars Persson Date: Thu, 8 Sep 2016 13:24:21 +0200 Subject: dwc_eth_qos: do not register semi-initialized device We move register_netdev() to the end of dwceqos_probe() to close any races where the netdev callbacks are called before the initialization has finished. Reported-by: Pavel Andrianov Signed-off-by: Lars Persson Signed-off-by: David S. Miller --- drivers/net/ethernet/synopsys/dwc_eth_qos.c | 38 ++++++++++++++--------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c index 5a3941bf250f..4490ebaed127 100644 --- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c +++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c @@ -1246,7 +1246,7 @@ static int dwceqos_mii_init(struct net_local *lp) lp->mii_bus->read = &dwceqos_mdio_read; lp->mii_bus->write = &dwceqos_mdio_write; lp->mii_bus->priv = lp; - lp->mii_bus->parent = &lp->ndev->dev; + lp->mii_bus->parent = &lp->pdev->dev; of_address_to_resource(lp->pdev->dev.of_node, 0, &res); snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%.8llx", @@ -2853,25 +2853,17 @@ static int dwceqos_probe(struct platform_device *pdev) ndev->features = ndev->hw_features; - netif_napi_add(ndev, &lp->napi, dwceqos_rx_poll, NAPI_POLL_WEIGHT); - - ret = register_netdev(ndev); - if (ret) { - dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); - goto err_out_clk_dis_aper; - } - lp->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref_clk"); if (IS_ERR(lp->phy_ref_clk)) { dev_err(&pdev->dev, "phy_ref_clk clock not found.\n"); ret = PTR_ERR(lp->phy_ref_clk); - goto err_out_unregister_netdev; + goto err_out_clk_dis_aper; } ret = clk_prepare_enable(lp->phy_ref_clk); if (ret) { dev_err(&pdev->dev, "Unable to enable device clock.\n"); - goto err_out_unregister_netdev; + goto err_out_clk_dis_aper; } lp->phy_node = of_parse_phandle(lp->pdev->dev.of_node, @@ -2880,7 +2872,7 @@ static int dwceqos_probe(struct platform_device *pdev) ret = of_phy_register_fixed_link(lp->pdev->dev.of_node); if (ret < 0) { dev_err(&pdev->dev, "invalid fixed-link"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } lp->phy_node = of_node_get(lp->pdev->dev.of_node); @@ -2889,7 +2881,7 @@ static int dwceqos_probe(struct platform_device *pdev) ret = of_get_phy_mode(lp->pdev->dev.of_node); if (ret < 0) { dev_err(&lp->pdev->dev, "error in getting phy i/f\n"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } lp->phy_interface = ret; @@ -2897,14 +2889,14 @@ static int dwceqos_probe(struct platform_device *pdev) ret = dwceqos_mii_init(lp); if (ret) { dev_err(&lp->pdev->dev, "error in dwceqos_mii_init\n"); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } ret = dwceqos_mii_probe(ndev); if (ret != 0) { netdev_err(ndev, "mii_probe fail.\n"); ret = -ENXIO; - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } dwceqos_set_umac_addr(lp, lp->ndev->dev_addr, 0); @@ -2922,7 +2914,7 @@ static int dwceqos_probe(struct platform_device *pdev) if (ret) { dev_err(&lp->pdev->dev, "Unable to retrieve DT, error %d\n", ret); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } dev_info(&lp->pdev->dev, "pdev->id %d, baseaddr 0x%08lx, irq %d\n", pdev->id, ndev->base_addr, ndev->irq); @@ -2932,18 +2924,24 @@ static int dwceqos_probe(struct platform_device *pdev) if (ret) { dev_err(&lp->pdev->dev, "Unable to request IRQ %d, error %d\n", ndev->irq, ret); - goto err_out_unregister_clk_notifier; + goto err_out_clk_dis_phy; } if (netif_msg_probe(lp)) netdev_dbg(ndev, "net_local@%p\n", lp); + netif_napi_add(ndev, &lp->napi, dwceqos_rx_poll, NAPI_POLL_WEIGHT); + + ret = register_netdev(ndev); + if (ret) { + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); + goto err_out_clk_dis_phy; + } + return 0; -err_out_unregister_clk_notifier: +err_out_clk_dis_phy: clk_disable_unprepare(lp->phy_ref_clk); -err_out_unregister_netdev: - unregister_netdev(ndev); err_out_clk_dis_aper: clk_disable_unprepare(lp->apb_pclk); err_out_free_netdev: -- cgit v1.3-18-gd494 From c2f57fb97da5730509a50e316f353d3da17f6c25 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 8 Sep 2016 16:25:15 +0200 Subject: drivers: net: phy: mdio-xgene: Add hardware dependency The mdio-xgene driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Iyappan Subramanian Cc: David S. Miller Acked-by: Iyappan Subramanian Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 47a64342cc16..b4863e4e522b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -303,6 +303,7 @@ config MDIO_HISI_FEMAC config MDIO_XGENE tristate "APM X-Gene SoC MDIO bus controller" + depends on ARCH_XGENE || COMPILE_TEST help This module provides a driver for the MDIO busses found in the APM X-Gene SoC's. -- cgit v1.3-18-gd494 From 43ba588346455dcc984dc98a49af1c2eb1e9aa75 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 7 Sep 2016 19:25:37 -0700 Subject: Input: silead_gsl1680 - document firmware-name, fix implementation The driver has supported touchscreen-fw-name to specify the firmware to load since it has been merged, but this was omitted from the dt-binding documentation. During review of adding touchscreen-fw-name to the binding documentation it was brought up that there is a standard property name called "firmware-name" for this, which should be used. Since there are no users of touchscreen-fw-name yet, this commit adds documentation of "firmware-name" to the dt-binding documentation and switches the driver over to use this. This commit also makes the driver add a "silead/" prefix to the firmware name from dt before calling request_firmware. That the firmware files are stored under /lib/firmware/silead under Linux is an implementation detail and does not belong in devicetree. Signed-off-by: Hans de Goede Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/touchscreen/silead_gsl1680.txt | 1 + drivers/input/touchscreen/silead.c | 5 +++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index 1112e0d794e1..820fee4b77b6 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -13,6 +13,7 @@ Required properties: - touchscreen-size-y : See touchscreen.txt Optional properties: +- firmware-name : File basename (string) for board specific firmware - touchscreen-inverted-x : See touchscreen.txt - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index b2744a64e933..c7ab116a16b3 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -390,9 +390,10 @@ static void silead_ts_read_props(struct i2c_client *client) data->max_fingers = 5; /* Most devices handle up-to 5 fingers */ } - error = device_property_read_string(dev, "touchscreen-fw-name", &str); + error = device_property_read_string(dev, "firmware-name", &str); if (!error) - snprintf(data->fw_name, sizeof(data->fw_name), "%s", str); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s", str); else dev_dbg(dev, "Firmware file name read error. Using default."); } -- cgit v1.3-18-gd494 From 4af2ff91ec3f42b538a65cf12df5f9faf6aaa914 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 7 Sep 2016 19:32:14 -0700 Subject: Input: silead_gsl1680 - use "silead/" prefix for firmware loading The silead touch-controller ICs use a different firmware per digitizer / tablet model. So there are going to be quite a few of then and they really should be under a separate subdir. This commit prefixes the default firmware names with "silead/" just like we are already doing for devicetree specified firmware names. Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/silead.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index c7ab116a16b3..f502c8488be8 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -411,14 +411,14 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, if (!acpi_id) return -ENODEV; - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - acpi_id->id); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", acpi_id->id); for (i = 0; i < strlen(data->fw_name); i++) data->fw_name[i] = tolower(data->fw_name[i]); } else { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", - id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); } return 0; @@ -427,7 +427,8 @@ static int silead_ts_set_default_fw_name(struct silead_ts_data *data, static int silead_ts_set_default_fw_name(struct silead_ts_data *data, const struct i2c_device_id *id) { - snprintf(data->fw_name, sizeof(data->fw_name), "%s.fw", id->name); + snprintf(data->fw_name, sizeof(data->fw_name), + "silead/%s.fw", id->name); return 0; } #endif -- cgit v1.3-18-gd494 From e1487888eccc83e9eb5a3659955f79b039dc7945 Mon Sep 17 00:00:00 2001 From: Chris Brandt Date: Wed, 7 Sep 2016 14:57:09 -0400 Subject: net: ethernet: renesas: sh_eth: add POST registers for rz Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer Signed-off-by: Chris Brandt Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 799d58d86e6d..054e795df90f 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -201,9 +201,14 @@ static const u16 sh_eth_offset_fast_rz[SH_ETH_MAX_REGISTER_OFFSET] = { [ARSTR] = 0x0000, [TSU_CTRST] = 0x0004, + [TSU_FWSLC] = 0x0038, [TSU_VTAG0] = 0x0058, [TSU_ADSBSY] = 0x0060, [TSU_TEN] = 0x0064, + [TSU_POST1] = 0x0070, + [TSU_POST2] = 0x0074, + [TSU_POST3] = 0x0078, + [TSU_POST4] = 0x007c, [TSU_ADRH0] = 0x0100, [TXNLCR0] = 0x0080, @@ -2786,6 +2791,8 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp) { if (sh_eth_is_rz_fast_ether(mdp)) { sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */ + sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, + TSU_FWSLC); /* Enable POST registers */ return; } -- cgit v1.3-18-gd494 From bd0b841fee49de421f615cc173ccff063303672f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Sep 2016 14:41:49 -0700 Subject: nvme: make NVME_RDMA depend on BLOCK Commit aa71987472a9 ("nvme: fabrics drivers don't need the nvme-pci driver") removed the dependency on BLK_DEV_NVME, but the cdoe does depend on the block layer (which used to be an implicit dependency through BLK_DEV_NVME). Otherwise you get various errors from the kbuild test robot random config testing when that happens to hit a configuration with BLOCK device support disabled. Cc: Christoph Hellwig Cc: Jay Freyensee Cc: Sagi Grimberg Signed-off-by: Linus Torvalds --- drivers/nvme/host/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index 0c644f7bdf80..f7d37a62f874 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -30,7 +30,7 @@ config NVME_FABRICS config NVME_RDMA tristate "NVM Express over Fabrics RDMA host driver" - depends on INFINIBAND + depends on INFINIBAND && BLOCK select NVME_CORE select NVME_FABRICS select SG_POOL -- cgit v1.3-18-gd494 From 74a9e9054456658f047bf71d9108844defde793d Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 11 Sep 2016 10:56:17 +0300 Subject: net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all() mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib Signed-off-by: Rana Shahout Reported-by: Dan Carpenter Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 99c6bbdff501..97081e5bafd1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -158,10 +158,9 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) struct mlx4_en_priv *priv = netdev_priv(netdev); struct mlx4_en_dev *mdev = priv->mdev; struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg; - int err = 0; if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) - return -EINVAL; + return 1; if (dcb_cfg->pfc_state) { int tc; @@ -199,15 +198,17 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) en_dbg(DRV, priv, "Set pfc off\n"); } - err = mlx4_SET_PORT_general(mdev->dev, priv->port, - priv->rx_skb_size + ETH_FCS_LEN, - priv->prof->tx_pause, - priv->prof->tx_ppp, - priv->prof->rx_pause, - priv->prof->rx_ppp); - if (err) + if (mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp)) { en_err(priv, "Failed setting pause params\n"); - return err; + return 1; + } + + return 0; } static u8 mlx4_en_dcbnl_get_state(struct net_device *dev) -- cgit v1.3-18-gd494 From c677071741343381f4f555867c04af7ec4a90869 Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Sun, 11 Sep 2016 10:56:18 +0300 Subject: net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state() mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 97081e5bafd1..316a70714434 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -239,7 +239,10 @@ static u8 mlx4_en_dcbnl_set_state(struct net_device *dev, u8 state) priv->flags &= ~MLX4_EN_FLAG_DCB_ENABLED; } - return mlx4_en_setup_tc(dev, num_tcs); + if (mlx4_en_setup_tc(dev, num_tcs)) + return 1; + + return 0; } /* On success returns a non-zero 802.1p user priority bitmap -- cgit v1.3-18-gd494 From 564ed9b187082da79726a2f25bb88a58ebeec7e8 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 11 Sep 2016 10:56:19 +0300 Subject: net/mlx4_en: Fixes for DCBX This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 31 +++++++++++++------------- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 21 +++++++---------- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 15 +++---------- drivers/net/ethernet/mellanox/mlx4/port.c | 4 ++-- 4 files changed, 28 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 316a70714434..b04760a5034b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -94,7 +94,7 @@ static u8 mlx4_en_dcbnl_getcap(struct net_device *dev, int capid, u8 *cap) *cap = true; break; case DCB_CAP_ATTR_DCBX: - *cap = priv->cee_params.dcbx_cap; + *cap = priv->dcbx_cap; break; case DCB_CAP_ATTR_PFC_TCS: *cap = 1 << mlx4_max_tc(priv->mdev->dev); @@ -111,14 +111,14 @@ static u8 mlx4_en_dcbnl_getpfcstate(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); - return priv->cee_params.dcb_cfg.pfc_state; + return priv->cee_config.pfc_state; } static void mlx4_en_dcbnl_setpfcstate(struct net_device *netdev, u8 state) { struct mlx4_en_priv *priv = netdev_priv(netdev); - priv->cee_params.dcb_cfg.pfc_state = state; + priv->cee_config.pfc_state = state; } static void mlx4_en_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, @@ -126,7 +126,7 @@ static void mlx4_en_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, { struct mlx4_en_priv *priv = netdev_priv(netdev); - *setting = priv->cee_params.dcb_cfg.tc_config[priority].dcb_pfc; + *setting = priv->cee_config.dcb_pfc[priority]; } static void mlx4_en_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, @@ -134,8 +134,8 @@ static void mlx4_en_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, { struct mlx4_en_priv *priv = netdev_priv(netdev); - priv->cee_params.dcb_cfg.tc_config[priority].dcb_pfc = setting; - priv->cee_params.dcb_cfg.pfc_state = true; + priv->cee_config.dcb_pfc[priority] = setting; + priv->cee_config.pfc_state = true; } static int mlx4_en_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) @@ -157,12 +157,11 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) { struct mlx4_en_priv *priv = netdev_priv(netdev); struct mlx4_en_dev *mdev = priv->mdev; - struct mlx4_en_cee_config *dcb_cfg = &priv->cee_params.dcb_cfg; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; - if (dcb_cfg->pfc_state) { + if (priv->cee_config.pfc_state) { int tc; priv->prof->rx_pause = 0; @@ -170,7 +169,7 @@ static u8 mlx4_en_dcbnl_set_all(struct net_device *netdev) for (tc = 0; tc < CEE_DCBX_MAX_PRIO; tc++) { u8 tc_mask = 1 << tc; - switch (dcb_cfg->tc_config[tc].dcb_pfc) { + switch (priv->cee_config.dcb_pfc[tc]) { case pfc_disabled: priv->prof->tx_ppp &= ~tc_mask; priv->prof->rx_ppp &= ~tc_mask; @@ -226,7 +225,7 @@ static u8 mlx4_en_dcbnl_set_state(struct net_device *dev, u8 state) struct mlx4_en_priv *priv = netdev_priv(dev); int num_tcs = 0; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 1; if (!!(state) == !!(priv->flags & MLX4_EN_FLAG_DCB_ENABLED)) @@ -256,7 +255,7 @@ static int mlx4_en_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id) .selector = idtype, .protocol = id, }; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return 0; return dcb_getapp(netdev, &app); @@ -268,7 +267,7 @@ static int mlx4_en_dcbnl_setapp(struct net_device *netdev, u8 idtype, struct mlx4_en_priv *priv = netdev_priv(netdev); struct dcb_app app; - if (!(priv->cee_params.dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + if (!(priv->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return -EINVAL; memset(&app, 0, sizeof(struct dcb_app)); @@ -437,7 +436,7 @@ static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev) { struct mlx4_en_priv *priv = netdev_priv(dev); - return priv->cee_params.dcbx_cap; + return priv->dcbx_cap; } static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) @@ -446,7 +445,7 @@ static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) struct ieee_ets ets = {0}; struct ieee_pfc pfc = {0}; - if (mode == priv->cee_params.dcbx_cap) + if (mode == priv->dcbx_cap) return 0; if ((mode & DCB_CAP_DCBX_LLD_MANAGED) || @@ -455,7 +454,7 @@ static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) !(mode & DCB_CAP_DCBX_HOST)) goto err; - priv->cee_params.dcbx_cap = mode; + priv->dcbx_cap = mode; ets.ets_cap = IEEE_8021QAZ_MAX_TCS; pfc.pfc_cap = IEEE_8021QAZ_MAX_TCS; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 4198e9bf89d0..fedb829276f4 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -71,10 +71,11 @@ int mlx4_en_setup_tc(struct net_device *dev, u8 up) #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { if (up) { - priv->flags |= MLX4_EN_FLAG_DCB_ENABLED; + if (priv->dcbx_cap) + priv->flags |= MLX4_EN_FLAG_DCB_ENABLED; } else { priv->flags &= ~MLX4_EN_FLAG_DCB_ENABLED; - priv->cee_params.dcb_cfg.pfc_state = false; + priv->cee_config.pfc_state = false; } } #endif /* CONFIG_MLX4_EN_DCB */ @@ -3048,9 +3049,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; -#ifdef CONFIG_MLX4_EN_DCB - struct tc_configuration *tc; -#endif dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -3117,16 +3115,13 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, priv->msg_enable = MLX4_EN_MSG_LEVEL; #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { - priv->cee_params.dcbx_cap = DCB_CAP_DCBX_VER_CEE | - DCB_CAP_DCBX_HOST | - DCB_CAP_DCBX_VER_IEEE; + priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST | + DCB_CAP_DCBX_VER_IEEE; priv->flags |= MLX4_EN_DCB_ENABLED; - priv->cee_params.dcb_cfg.pfc_state = false; + priv->cee_config.pfc_state = false; - for (i = 0; i < MLX4_EN_NUM_UP; i++) { - tc = &priv->cee_params.dcb_cfg.tc_config[i]; - tc->dcb_pfc = pfc_disabled; - } + for (i = 0; i < MLX4_EN_NUM_UP; i++) + priv->cee_config.dcb_pfc[i] = pfc_disabled; if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETS_CFG) { dev->dcbnl_ops = &mlx4_en_dcbnl_ops; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 2c2913dcae98..9099dbd04951 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -482,20 +482,10 @@ enum dcb_pfc_type { pfc_enabled_rx }; -struct tc_configuration { - enum dcb_pfc_type dcb_pfc; -}; - struct mlx4_en_cee_config { bool pfc_state; - struct tc_configuration tc_config[MLX4_EN_NUM_UP]; + enum dcb_pfc_type dcb_pfc[MLX4_EN_NUM_UP]; }; - -struct mlx4_en_cee_params { - u8 dcbx_cap; - struct mlx4_en_cee_config dcb_cfg; -}; - #endif struct ethtool_flow_id { @@ -624,7 +614,8 @@ struct mlx4_en_priv { struct ieee_ets ets; u16 maxrate[IEEE_8021QAZ_MAX_TCS]; enum dcbnl_cndd_states cndd_state[IEEE_8021QAZ_MAX_TCS]; - struct mlx4_en_cee_params cee_params; + struct mlx4_en_cee_config cee_config; + u8 dcbx_cap; #endif #ifdef CONFIG_RFS_ACCEL spinlock_t filters_lock; diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 3d2095e5c61c..c5b2064297a1 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -52,7 +52,7 @@ #define MLX4_FLAG_V_IGNORE_FCS_MASK 0x2 #define MLX4_IGNORE_FCS_MASK 0x1 -#define MLNX4_TX_MAX_NUMBER 8 +#define MLX4_TC_MAX_NUMBER 8 void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table) { @@ -2022,7 +2022,7 @@ int mlx4_max_tc(struct mlx4_dev *dev) u8 num_tc = dev->caps.max_tc_eth; if (!num_tc) - num_tc = MLNX4_TX_MAX_NUMBER; + num_tc = MLX4_TC_MAX_NUMBER; return num_tc; } -- cgit v1.3-18-gd494 From 7a61fc86af4a0c957c5b8c5777ab21d5cc286748 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Sun, 11 Sep 2016 10:56:20 +0300 Subject: net/mlx4_en: Fix panic on xmit while port is down When port is down, tx drop counter update is not needed. Updating the counter in this case can cause a kernel panic as when the port is down, ring can be NULL. Fixes: 63a664b7e92b ("net/mlx4_en: fix tx_dropped bug") Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 9df87ca0515a..e2509bba3e7c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -818,7 +818,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) real_size = get_real_size(skb, shinfo, dev, &lso_header_size, &inline_ok, &fragptr); if (unlikely(!real_size)) - goto tx_drop; + goto tx_drop_count; /* Align descriptor to TXBB size */ desc_size = ALIGN(real_size, TXBB_SIZE); @@ -826,7 +826,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(nr_txbb > MAX_DESC_TXBBS)) { if (netif_msg_tx_err(priv)) en_warn(priv, "Oversized header or SG list\n"); - goto tx_drop; + goto tx_drop_count; } bf_ok = ring->bf_enabled; @@ -1071,9 +1071,10 @@ tx_drop_unmap: PCI_DMA_TODEVICE); } +tx_drop_count: + ring->tx_dropped++; tx_drop: dev_kfree_skb_any(skb); - ring->tx_dropped++; return NETDEV_TX_OK; } @@ -1106,7 +1107,7 @@ netdev_tx_t mlx4_en_xmit_frame(struct mlx4_en_rx_alloc *frame, goto tx_drop; if (mlx4_en_is_tx_ring_full(ring)) - goto tx_drop; + goto tx_drop_count; /* fetch ring->cons far ahead before needing it to avoid stall */ ring_cons = READ_ONCE(ring->cons); @@ -1176,7 +1177,8 @@ netdev_tx_t mlx4_en_xmit_frame(struct mlx4_en_rx_alloc *frame, return NETDEV_TX_OK; -tx_drop: +tx_drop_count: ring->tx_dropped++; +tx_drop: return NETDEV_TX_BUSY; } -- cgit v1.3-18-gd494 From f190fd92458da3e869b4e2c6289e2c617490ae53 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 2 Sep 2016 10:37:56 +0200 Subject: USB: serial: simple: add support for another Infineon flashloader This patch adds support for Infineon flashloader 0x8087/0x0801. The flashloader is used in Telit LE940B modem family with Telit flashing application. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial-simple.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index a204782ae530..e98b6e57b703 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS); /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ - { USB_DEVICE(0x8087, 0x0716) } + { USB_DEVICE(0x8087, 0x0716) }, \ + { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); /* Google Serial USB SubClass */ -- cgit v1.3-18-gd494 From 3ae50f4512ce831e8b63eb54ad969417ff30ada7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 8 Sep 2016 11:11:36 +0200 Subject: mmc: sdhci-st: Handle interconnect clock Some ST platforms contain interconnect (ICN) clocks which must be handed correctly in order to obtain full functionality of a given IP. In this case, if the ICN clocks are not handled properly by the ST SDHCI driver MMC will break and the following output can be observed: [ 13.916949] mmc0: Timeout waiting for hardware interrupt. [ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)=========== [ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002 [ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001 [ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013 [ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011 [ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07 [ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000 [ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b [ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 [ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000 [ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000 [ 13.992252] sdhci: Host ctl2: 0x00000000 [ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200 [ 14.001990] sdhci: =========================================== [ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress. A decent point was raised about minimising the use of a local variable that we 'could' do without. I've chosen consistency over the possibility of reducing the local variable count by 1. Thinking that it's more important for the code to be grouped and authoured in a similar manner/style for greater maintainability/readability. Cc: stable@vger.kernel.org Tested-by: Peter Griffin Signed-off-by: Lee Jones Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-st.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c index c95ba83366a0..ed92ce729dde 100644 --- a/drivers/mmc/host/sdhci-st.c +++ b/drivers/mmc/host/sdhci-st.c @@ -28,6 +28,7 @@ struct st_mmc_platform_data { struct reset_control *rstc; + struct clk *icnclk; void __iomem *top_ioaddr; }; @@ -353,7 +354,7 @@ static int sdhci_st_probe(struct platform_device *pdev) struct sdhci_host *host; struct st_mmc_platform_data *pdata; struct sdhci_pltfm_host *pltfm_host; - struct clk *clk; + struct clk *clk, *icnclk; int ret = 0; u16 host_version; struct resource *res; @@ -365,6 +366,11 @@ static int sdhci_st_probe(struct platform_device *pdev) return PTR_ERR(clk); } + /* ICN clock isn't compulsory, but use it if it's provided. */ + icnclk = devm_clk_get(&pdev->dev, "icn"); + if (IS_ERR(icnclk)) + icnclk = NULL; + rstc = devm_reset_control_get(&pdev->dev, NULL); if (IS_ERR(rstc)) rstc = NULL; @@ -389,6 +395,7 @@ static int sdhci_st_probe(struct platform_device *pdev) } clk_prepare_enable(clk); + clk_prepare_enable(icnclk); /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -400,6 +407,7 @@ static int sdhci_st_probe(struct platform_device *pdev) } pltfm_host->clk = clk; + pdata->icnclk = icnclk; /* Configure the Arasan HC inside the flashSS */ st_mmcss_cconfig(np, host); @@ -422,6 +430,7 @@ static int sdhci_st_probe(struct platform_device *pdev) return 0; err_out: + clk_disable_unprepare(icnclk); clk_disable_unprepare(clk); err_of: sdhci_pltfm_free(pdev); @@ -442,6 +451,8 @@ static int sdhci_st_remove(struct platform_device *pdev) ret = sdhci_pltfm_unregister(pdev); + clk_disable_unprepare(pdata->icnclk); + if (rstc) reset_control_assert(rstc); @@ -462,6 +473,7 @@ static int sdhci_st_suspend(struct device *dev) if (pdata->rstc) reset_control_assert(pdata->rstc); + clk_disable_unprepare(pdata->icnclk); clk_disable_unprepare(pltfm_host->clk); out: return ret; @@ -475,6 +487,7 @@ static int sdhci_st_resume(struct device *dev) struct device_node *np = dev->of_node; clk_prepare_enable(pltfm_host->clk); + clk_prepare_enable(pdata->icnclk); if (pdata->rstc) reset_control_deassert(pdata->rstc); -- cgit v1.3-18-gd494 From ad8d52b897a14711e026889053befbbee7fd51ba Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:43 +0100 Subject: pcmcia: ds: fix suspend/resume PCMCIA suspend/resume no longer works since the commit mentioned below, as the callbacks are no longer made. Convert the driver to the new dev_pm_ops, which restores the suspend/resume functionality. Tested on the arm arch Assabet platform. Fixes: aa8e54b559479 ("PM / sleep: Go direct_complete if driver has no callbacks") Signed-off-by: Russell King --- drivers/pcmcia/ds.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 489ea1098c96..69b5e811ea2b 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -977,7 +977,7 @@ static int pcmcia_bus_uevent(struct device *dev, struct kobj_uevent_env *env) /************************ runtime PM support ***************************/ -static int pcmcia_dev_suspend(struct device *dev, pm_message_t state); +static int pcmcia_dev_suspend(struct device *dev); static int pcmcia_dev_resume(struct device *dev); static int runtime_suspend(struct device *dev) @@ -985,7 +985,7 @@ static int runtime_suspend(struct device *dev) int rc; device_lock(dev); - rc = pcmcia_dev_suspend(dev, PMSG_SUSPEND); + rc = pcmcia_dev_suspend(dev); device_unlock(dev); return rc; } @@ -1135,7 +1135,7 @@ ATTRIBUTE_GROUPS(pcmcia_dev); /* PM support, also needed for reset */ -static int pcmcia_dev_suspend(struct device *dev, pm_message_t state) +static int pcmcia_dev_suspend(struct device *dev) { struct pcmcia_device *p_dev = to_pcmcia_dev(dev); struct pcmcia_driver *p_drv = NULL; @@ -1410,6 +1410,9 @@ static struct class_interface pcmcia_bus_interface __refdata = { .remove_dev = &pcmcia_bus_remove_socket, }; +static const struct dev_pm_ops pcmcia_bus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pcmcia_dev_suspend, pcmcia_dev_resume) +}; struct bus_type pcmcia_bus_type = { .name = "pcmcia", @@ -1418,8 +1421,7 @@ struct bus_type pcmcia_bus_type = { .dev_groups = pcmcia_dev_groups, .probe = pcmcia_device_probe, .remove = pcmcia_device_remove, - .suspend = pcmcia_dev_suspend, - .resume = pcmcia_dev_resume, + .pm = &pcmcia_bus_pm_ops, }; -- cgit v1.3-18-gd494 From 6dec04e8f30a8cf1e782500244d8601c1f8505ad Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:43 +0100 Subject: pcmcia: sa11xx_base: fix reporting of timing information Fix the reporting of the currently programmed timing information. These entries have been showing zero due to the clock rate being a factor of 1000 too big. With this change, we go from: I/O : 165 (0) attribute: 300 (0) common : 300 (0) to: I/O : 165 (172) attribute: 300 (316) common : 300 (316) Signed-off-by: Russell King --- drivers/pcmcia/sa11xx_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index 9f6ec87b9f9e..af37b7ec1c73 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -144,7 +144,7 @@ static int sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf) { struct soc_pcmcia_timing timing; - unsigned int clock = clk_get_rate(skt->clk); + unsigned int clock = clk_get_rate(skt->clk) / 1000; unsigned long mecr = MECR; char *p = buf; -- cgit v1.3-18-gd494 From cbd5a16820e576d26bf985ad62b8c4cdf792fb45 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:43 +0100 Subject: pcmcia: sa11xx_base: add units to the timing information Add units to the timing information, so we know that the numbers are nanoseconds. The output changes from: I/O : 165 (172) attribute: 300 (316) common : 300 (316) to: I/O : 165ns (172ns) attribute: 300ns (316ns) common : 300ns (316ns) Signed-off-by: Russell King --- drivers/pcmcia/sa11xx_base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index af37b7ec1c73..48140ac73ed6 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -150,13 +150,13 @@ sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf) soc_common_pcmcia_get_timing(skt, &timing); - p+=sprintf(p, "I/O : %u (%u)\n", timing.io, + p+=sprintf(p, "I/O : %uns (%uns)\n", timing.io, sa1100_pcmcia_cmd_time(clock, MECR_BSIO_GET(mecr, skt->nr))); - p+=sprintf(p, "attribute: %u (%u)\n", timing.attr, + p+=sprintf(p, "attribute: %uns (%uns)\n", timing.attr, sa1100_pcmcia_cmd_time(clock, MECR_BSA_GET(mecr, skt->nr))); - p+=sprintf(p, "common : %u (%u)\n", timing.mem, + p+=sprintf(p, "common : %uns (%uns)\n", timing.mem, sa1100_pcmcia_cmd_time(clock, MECR_BSM_GET(mecr, skt->nr))); return p - buf; -- cgit v1.3-18-gd494 From a466ebd2fc6a793e55f028a008b9f094d7d30fe3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:43 +0100 Subject: pcmcia: soc_common: fix SS_STSCHG polarity SS_STSCHG should be set for an IO card when the BVD1 signal is asserted low, not high. Signed-off-by: Russell King --- drivers/pcmcia/soc_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index eed5e9c05353..d5ca760c4eb2 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -235,7 +235,7 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) stat |= skt->cs_state.Vcc ? SS_POWERON : 0; if (skt->cs_state.flags & SS_IOCARD) - stat |= state.bvd1 ? SS_STSCHG : 0; + stat |= state.bvd1 ? 0 : SS_STSCHG; else { if (state.bvd1 == 0) stat |= SS_BATDEAD; -- cgit v1.3-18-gd494 From 3f8df892b2312011f2ba73aedc0a192d70b8844e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 2 Sep 2016 10:14:20 +0100 Subject: pcmcia: sa1111: fix propagation of lowlevel board init return code When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound but was not functional due to no sockets being registered. This is because the return code from the lowlevel board initialisation was not being propagated out of the probe function. Fix this. Tested-by: Robert Jarzmik Signed-off-by: Russell King --- drivers/pcmcia/sa1111_badge4.c | 22 ++++++++-------------- drivers/pcmcia/sa1111_generic.c | 22 +++++++++++++++++----- drivers/pcmcia/sa1111_jornada720.c | 25 ++++++++++--------------- drivers/pcmcia/sa1111_lubbock.c | 32 +++++++++++++------------------- drivers/pcmcia/sa1111_neponset.c | 26 ++++++++++---------------- 5 files changed, 58 insertions(+), 69 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c index 12f0dd091477..2f490930430d 100644 --- a/drivers/pcmcia/sa1111_badge4.c +++ b/drivers/pcmcia/sa1111_badge4.c @@ -134,20 +134,14 @@ static struct pcmcia_low_level badge4_pcmcia_ops = { int pcmcia_badge4_init(struct sa1111_dev *dev) { - int ret = -ENODEV; - - if (machine_is_badge4()) { - printk(KERN_INFO - "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n", - __func__, - badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc); - - sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops); - ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; + printk(KERN_INFO + "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n", + __func__, + badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc); + + sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops); + return sa1111_pcmcia_add(dev, &badge4_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); } static int __init pcmv_setup(char *s) diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index a1531feb8460..3d95dffcff7a 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -18,6 +18,7 @@ #include #include +#include #include #include "sa1111_generic.h" @@ -203,19 +204,30 @@ static int pcmcia_probe(struct sa1111_dev *dev) sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR); sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR); + ret = -ENODEV; #ifdef CONFIG_SA1100_BADGE4 - pcmcia_badge4_init(dev); + if (machine_is_badge4()) + ret = pcmcia_badge4_init(dev); #endif #ifdef CONFIG_SA1100_JORNADA720 - pcmcia_jornada720_init(dev); + if (machine_is_jornada720()) + ret = pcmcia_jornada720_init(dev); #endif #ifdef CONFIG_ARCH_LUBBOCK - pcmcia_lubbock_init(dev); + if (machine_is_lubbock()) + ret = pcmcia_lubbock_init(dev); #endif #ifdef CONFIG_ASSABET_NEPONSET - pcmcia_neponset_init(dev); + if (machine_is_assabet()) + ret = pcmcia_neponset_init(dev); #endif - return 0; + + if (ret) { + release_mem_region(dev->res.start, 512); + sa1111_disable_device(dev); + } + + return ret; } static int pcmcia_remove(struct sa1111_dev *dev) diff --git a/drivers/pcmcia/sa1111_jornada720.c b/drivers/pcmcia/sa1111_jornada720.c index c2c30580c83f..480a3ede27c8 100644 --- a/drivers/pcmcia/sa1111_jornada720.c +++ b/drivers/pcmcia/sa1111_jornada720.c @@ -94,22 +94,17 @@ static struct pcmcia_low_level jornada720_pcmcia_ops = { int pcmcia_jornada720_init(struct sa1111_dev *sadev) { - int ret = -ENODEV; + unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; - if (machine_is_jornada720()) { - unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3; + /* Fixme: why messing around with SA11x0's GPIO1? */ + GRER |= 0x00000002; - GRER |= 0x00000002; + /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ + sa1111_set_io_dir(sadev, pin, 0, 0); + sa1111_set_io(sadev, pin, 0); + sa1111_set_sleep_io(sadev, pin, 0); - /* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */ - sa1111_set_io_dir(sadev, pin, 0, 0); - sa1111_set_io(sadev, pin, 0); - sa1111_set_sleep_io(sadev, pin, 0); - - sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); - ret = sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; + sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops); + return sa1111_pcmcia_add(sadev, &jornada720_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); } diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c index c5caf5790451..df2b6b28b1d1 100644 --- a/drivers/pcmcia/sa1111_lubbock.c +++ b/drivers/pcmcia/sa1111_lubbock.c @@ -210,27 +210,21 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = { int pcmcia_lubbock_init(struct sa1111_dev *sadev) { - int ret = -ENODEV; - - if (machine_is_lubbock()) { - /* - * Set GPIO_A<3:0> to be outputs for the MAX1600, - * and switch to standby mode. - */ - sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); - sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - - /* Set CF Socket 1 power to standby mode. */ - lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); + /* + * Set GPIO_A<3:0> to be outputs for the MAX1600, + * and switch to standby mode. + */ + sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); - pxa2xx_configure_sockets(&sadev->dev); - ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, - pxa2xx_drv_pcmcia_add_one); - } + /* Set CF Socket 1 power to standby mode. */ + lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); - return ret; + pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); + pxa2xx_configure_sockets(&sadev->dev); + return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, + pxa2xx_drv_pcmcia_add_one); } MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c index 1d78739c4c07..019c395eb4bf 100644 --- a/drivers/pcmcia/sa1111_neponset.c +++ b/drivers/pcmcia/sa1111_neponset.c @@ -110,20 +110,14 @@ static struct pcmcia_low_level neponset_pcmcia_ops = { int pcmcia_neponset_init(struct sa1111_dev *sadev) { - int ret = -ENODEV; - - if (machine_is_assabet()) { - /* - * Set GPIO_A<3:0> to be outputs for the MAX1600, - * and switch to standby mode. - */ - sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); - sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); - sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops); - ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops, - sa11xx_drv_pcmcia_add_one); - } - - return ret; + /* + * Set GPIO_A<3:0> to be outputs for the MAX1600, + * and switch to standby mode. + */ + sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0); + sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0); + sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops); + return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops, + sa11xx_drv_pcmcia_add_one); } -- cgit v1.3-18-gd494 From 817ed5748e40bbc5b5f2aa0c3094c4a7adfb8881 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 1 Sep 2016 08:31:08 +0200 Subject: pcmcia: lubbock: fix sockets configuration On lubbock board, the probe of the driver crashes by dereferencing very early a platform_data structure which is not set, in pxa2xx_configure_sockets(). The stack fixed is : [ 0.244353] SA1111 Microprocessor Companion Chip: silicon revision 1, metal revision 1 [ 0.256321] sa1111 sa1111: Providing IRQ336-390 [ 0.340899] clocksource: Switched to clocksource oscr0 [ 0.472263] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 0.480469] pgd = c0004000 [ 0.483432] [00000004] *pgd=00000000 [ 0.487105] Internal error: Oops: f5 [#1] ARM [ 0.491497] Modules linked in: [ 0.494650] CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-rc3-00080-g1aaa68426f0c-dirty #2068 [ 0.503229] Hardware name: Intel DBPXA250 Development Platform (aka Lubbock) [ 0.510344] task: c3e42000 task.stack: c3e44000 [ 0.514984] PC is at pxa2xx_configure_sockets+0x4/0x24 (drivers/pcmcia/pxa2xx_base.c:227) [ 0.520193] LR is at pcmcia_lubbock_init+0x1c/0x38 [ 0.525079] pc : [] lr : [] psr: a0000053 [ 0.525079] sp : c3e45e70 ip : 100019ff fp : 00000000 [ 0.536651] r10: c0828900 r9 : c0434838 r8 : 00000000 [ 0.541953] r7 : c0820700 r6 : c0857b30 r5 : c3ec1400 r4 : c0820758 [ 0.548549] r3 : 00000000 r2 : 0000000c r1 : c3c09c40 r0 : c3ec1400 [ 0.555154] Flags: NzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none [ 0.562450] Control: 0000397f Table: a0004000 DAC: 00000053 [ 0.568257] Process swapper (pid: 1, stack limit = 0xc3e44190) [ 0.574154] Stack: (0xc3e45e70 to 0xc3e46000) [ 0.578610] 5e60: c4849800 00000000 c3ec1400 c024769c [ 0.586928] 5e80: 00000000 c3ec140c c3c0ee0c c3ec1400 c3ec1434 c020c410 c3ec1400 c3ec1434 [ 0.595244] 5ea0: c0820700 c080b408 c0828900 c020c5f8 00000000 c0820700 c020c578 c020ac5c [ 0.603560] 5ec0: c3e687cc c3e71e10 c0820700 00000000 c3c02de0 c020bae4 c03c62f7 c03c62f7 [ 0.611872] 5ee0: c3e68780 c0820700 c042e034 00000000 c043c440 c020cdec c080b408 00000005 [ 0.620188] 5f00: c042e034 c00096c0 c0034440 c01c730c 20000053 ffffffff 00000000 00000000 [ 0.628502] 5f20: 00000000 c3ffcb87 c3ffcb90 c00346ac c3e66ba0 c03f7914 00000092 00000005 [ 0.636811] 5f40: 00000005 c03f847c 00000091 c03f847c 00000000 00000005 c0434828 00000005 [ 0.645125] 5f60: c043482c 00000092 c043c440 c0828900 c0434838 c0418d2c 00000005 00000005 [ 0.653430] 5f80: 00000000 c041858c 00000000 c032e9f0 00000000 00000000 00000000 00000000 [ 0.661729] 5fa0: 00000000 c032e9f8 00000000 c000f0f0 00000000 00000000 00000000 00000000 [ 0.670020] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.678311] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 0.686673] (pxa2xx_configure_sockets) from pcmcia_lubbock_init (/drivers/pcmcia/sa1111_lubbock.c:161) [ 0.696026] (pcmcia_lubbock_init) from pcmcia_probe (/drivers/pcmcia/sa1111_generic.c:213) [ 0.704358] (pcmcia_probe) from driver_probe_device (/drivers/base/dd.c:378 /drivers/base/dd.c:499) [ 0.712848] (driver_probe_device) from __driver_attach (/./include/linux/device.h:983 /drivers/base/dd.c:733) [ 0.721414] (__driver_attach) from bus_for_each_dev (/drivers/base/bus.c:313) [ 0.729723] (bus_for_each_dev) from bus_add_driver (/drivers/base/bus.c:708) [ 0.738036] (bus_add_driver) from driver_register (/drivers/base/driver.c:169) [ 0.746185] (driver_register) from do_one_initcall (/init/main.c:778) [ 0.754561] (do_one_initcall) from kernel_init_freeable (/init/main.c:843 /init/main.c:851 /init/main.c:869 /init/main.c:1016) [ 0.763409] (kernel_init_freeable) from kernel_init (/init/main.c:944) [ 0.771660] (kernel_init) from ret_from_fork (/arch/arm/kernel/entry-common.S:119) [ 0.779347] Code: c03c6305 c03c631e c03c632e e5903048 (e993000c) All code ======== 0: c03c6305 eorsgt r6, ip, r5, lsl #6 4: c03c631e eorsgt r6, ip, lr, lsl r3 8: c03c632e eorsgt r6, ip, lr, lsr #6 c: e5903048 ldr r3, [r0, #72] ; 0x48 10:* e993000c ldmib r3, {r2, r3} <-- trapping instruction Signed-off-by: Robert Jarzmik Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_base.c | 9 +++++---- drivers/pcmcia/pxa2xx_base.h | 2 +- drivers/pcmcia/sa1111_lubbock.c | 2 +- 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 483f919e0d2e..91b5f5724cba 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -214,9 +214,8 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt, } #endif -void pxa2xx_configure_sockets(struct device *dev) +void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops) { - struct pcmcia_low_level *ops = dev->platform_data; /* * We have at least one socket, so set MECR:CIT * (Card Is There) @@ -322,7 +321,7 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev) goto err1; } - pxa2xx_configure_sockets(&dev->dev); + pxa2xx_configure_sockets(&dev->dev, ops); dev_set_drvdata(&dev->dev, sinfo); return 0; @@ -348,7 +347,9 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev) static int pxa2xx_drv_pcmcia_resume(struct device *dev) { - pxa2xx_configure_sockets(dev); + struct pcmcia_low_level *ops = (struct pcmcia_low_level *)dev->platform_data; + + pxa2xx_configure_sockets(dev, ops); return 0; } diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h index b609b45469ed..e58c7a415418 100644 --- a/drivers/pcmcia/pxa2xx_base.h +++ b/drivers/pcmcia/pxa2xx_base.h @@ -1,4 +1,4 @@ int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt); void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops); -void pxa2xx_configure_sockets(struct device *dev); +void pxa2xx_configure_sockets(struct device *dev, struct pcmcia_low_level *ops); diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c index df2b6b28b1d1..e741f499c875 100644 --- a/drivers/pcmcia/sa1111_lubbock.c +++ b/drivers/pcmcia/sa1111_lubbock.c @@ -222,7 +222,7 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev) lubbock_set_misc_wr((1 << 15) | (1 << 14), 0); pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops); - pxa2xx_configure_sockets(&sadev->dev); + pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops); return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops, pxa2xx_drv_pcmcia_add_one); } -- cgit v1.3-18-gd494 From e89ca58f9c901c8c4cfb09f96d879b186bb01492 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Fri, 2 Sep 2016 09:01:54 -0700 Subject: nvme-rdma: add DELETING queue flag When we get a surprise disconnect from the target we queue a periodic reconnect (which is the sane thing to do...). We only move the queues out of CONNECTED when we retry to reconnect (after 10 seconds in the default case) but we stop the blk queues immediately so we are not bothered with traffic from now on. If delete() is kicking off in this period the queues are still in CONNECTED state. Part of the delete sequence is trying to issue ctrl shutdown if the admin queue is CONNECTED (which it is!). This request is issued but stuck in blk-mq waiting for the queues to start again. This might be the one preventing us from forward progress... The patch separates the queue flags to CONNECTED and DELETING. Now we will move out of CONNECTED as soon as error recovery kicks in (before stopping the queues) and DELETING is on when we start the queue deletion. Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index a9d43f09963f..eeb08b658640 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -83,6 +83,7 @@ struct nvme_rdma_request { enum nvme_rdma_queue_flags { NVME_RDMA_Q_CONNECTED = (1 << 0), NVME_RDMA_IB_QUEUE_ALLOCATED = (1 << 1), + NVME_RDMA_Q_DELETING = (1 << 2), }; struct nvme_rdma_queue { @@ -559,6 +560,7 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl, queue = &ctrl->queues[idx]; queue->ctrl = ctrl; + queue->flags = 0; init_completion(&queue->cm_done); if (idx > 0) @@ -616,7 +618,7 @@ static void nvme_rdma_free_queue(struct nvme_rdma_queue *queue) static void nvme_rdma_stop_and_free_queue(struct nvme_rdma_queue *queue) { - if (!test_and_clear_bit(NVME_RDMA_Q_CONNECTED, &queue->flags)) + if (test_and_set_bit(NVME_RDMA_Q_DELETING, &queue->flags)) return; nvme_rdma_stop_queue(queue); nvme_rdma_free_queue(queue); @@ -769,8 +771,13 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) { struct nvme_rdma_ctrl *ctrl = container_of(work, struct nvme_rdma_ctrl, err_work); + int i; nvme_stop_keep_alive(&ctrl->ctrl); + + for (i = 0; i < ctrl->queue_count; i++) + clear_bit(NVME_RDMA_Q_CONNECTED, &ctrl->queues[i].flags); + if (ctrl->queue_count > 1) nvme_stop_queues(&ctrl->ctrl); blk_mq_stop_hw_queues(ctrl->ctrl.admin_q); @@ -1350,7 +1357,7 @@ static int nvme_rdma_device_unplug(struct nvme_rdma_queue *queue) cancel_delayed_work_sync(&ctrl->reconnect_work); /* Disable the queue so ctrl delete won't free it */ - if (test_and_clear_bit(NVME_RDMA_Q_CONNECTED, &queue->flags)) { + if (!test_and_set_bit(NVME_RDMA_Q_DELETING, &queue->flags)) { /* Free this queue ourselves */ nvme_rdma_stop_queue(queue); nvme_rdma_destroy_queue_ib(queue); -- cgit v1.3-18-gd494 From e87a911fed07e368c6f97e75152e6297a7dfba48 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 2 Sep 2016 09:01:54 -0700 Subject: nvme-rdma: use ib_client API to detect device removal Change nvme-rdma to use the IB Client API to detect device removal. This has the wonderful benefit of being able to blow away all the ib/rdma_cm resources for the device being removed. No craziness about not destroying the cm_id handling the event. No deadlocks due to broken iw_cm/rdma_cm/iwarp dependencies. And no need to have a bound cm_id around during controller recovery/reconnect to catch device removal events. We don't use the device_add aspect of the ib_client service since we only want to create resources for an IB device if we have a target utilizing that device. Reviewed-by: Christoph Hellwig Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 108 ++++++++++++++++++----------------------------- 1 file changed, 40 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index eeb08b658640..d6bdf55a969e 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1320,64 +1320,6 @@ out_destroy_queue_ib: return ret; } -/** - * nvme_rdma_device_unplug() - Handle RDMA device unplug - * @queue: Queue that owns the cm_id that caught the event - * - * DEVICE_REMOVAL event notifies us that the RDMA device is about - * to unplug so we should take care of destroying our RDMA resources. - * This event will be generated for each allocated cm_id. - * - * In our case, the RDMA resources are managed per controller and not - * only per queue. So the way we handle this is we trigger an implicit - * controller deletion upon the first DEVICE_REMOVAL event we see, and - * hold the event inflight until the controller deletion is completed. - * - * One exception that we need to handle is the destruction of the cm_id - * that caught the event. Since we hold the callout until the controller - * deletion is completed, we'll deadlock if the controller deletion will - * call rdma_destroy_id on this queue's cm_id. Thus, we claim ownership - * of destroying this queue before-hand, destroy the queue resources, - * then queue the controller deletion which won't destroy this queue and - * we destroy the cm_id implicitely by returning a non-zero rc to the callout. - */ -static int nvme_rdma_device_unplug(struct nvme_rdma_queue *queue) -{ - struct nvme_rdma_ctrl *ctrl = queue->ctrl; - int ret = 0; - - /* Own the controller deletion */ - if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING)) - return 0; - - dev_warn(ctrl->ctrl.device, - "Got rdma device removal event, deleting ctrl\n"); - - /* Get rid of reconnect work if its running */ - cancel_delayed_work_sync(&ctrl->reconnect_work); - - /* Disable the queue so ctrl delete won't free it */ - if (!test_and_set_bit(NVME_RDMA_Q_DELETING, &queue->flags)) { - /* Free this queue ourselves */ - nvme_rdma_stop_queue(queue); - nvme_rdma_destroy_queue_ib(queue); - - /* Return non-zero so the cm_id will destroy implicitly */ - ret = 1; - } - - /* - * Queue controller deletion. Keep a reference until all - * work is flushed since delete_work will free the ctrl mem - */ - kref_get(&ctrl->ctrl.kref); - queue_work(nvme_rdma_wq, &ctrl->delete_work); - flush_work(&ctrl->delete_work); - nvme_put_ctrl(&ctrl->ctrl); - - return ret; -} - static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id, struct rdma_cm_event *ev) { @@ -1419,8 +1361,8 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id, nvme_rdma_error_recovery(queue->ctrl); break; case RDMA_CM_EVENT_DEVICE_REMOVAL: - /* return 1 means impliciy CM ID destroy */ - return nvme_rdma_device_unplug(queue); + /* device removal is handled via the ib_client API */ + break; default: dev_err(queue->ctrl->ctrl.device, "Unexpected RDMA CM event (%d)\n", ev->event); @@ -2030,27 +1972,57 @@ static struct nvmf_transport_ops nvme_rdma_transport = { .create_ctrl = nvme_rdma_create_ctrl, }; +static void nvme_rdma_add_one(struct ib_device *ib_device) +{ +} + +static void nvme_rdma_remove_one(struct ib_device *ib_device, void *client_data) +{ + struct nvme_rdma_ctrl *ctrl; + + /* Delete all controllers using this device */ + mutex_lock(&nvme_rdma_ctrl_mutex); + list_for_each_entry(ctrl, &nvme_rdma_ctrl_list, list) { + if (ctrl->device->dev != ib_device) + continue; + dev_info(ctrl->ctrl.device, + "Removing ctrl: NQN \"%s\", addr %pISp\n", + ctrl->ctrl.opts->subsysnqn, &ctrl->addr); + __nvme_rdma_del_ctrl(ctrl); + } + mutex_unlock(&nvme_rdma_ctrl_mutex); + + flush_workqueue(nvme_rdma_wq); +} + +static struct ib_client nvme_rdma_ib_client = { + .name = "nvme_rdma", + .add = nvme_rdma_add_one, + .remove = nvme_rdma_remove_one +}; + static int __init nvme_rdma_init_module(void) { + int ret; + nvme_rdma_wq = create_workqueue("nvme_rdma_wq"); if (!nvme_rdma_wq) return -ENOMEM; + ret = ib_register_client(&nvme_rdma_ib_client); + if (ret) { + destroy_workqueue(nvme_rdma_wq); + return ret; + } + nvmf_register_transport(&nvme_rdma_transport); return 0; } static void __exit nvme_rdma_cleanup_module(void) { - struct nvme_rdma_ctrl *ctrl; - nvmf_unregister_transport(&nvme_rdma_transport); - - mutex_lock(&nvme_rdma_ctrl_mutex); - list_for_each_entry(ctrl, &nvme_rdma_ctrl_list, list) - __nvme_rdma_del_ctrl(ctrl); - mutex_unlock(&nvme_rdma_ctrl_mutex); - + ib_unregister_client(&nvme_rdma_ib_client); destroy_workqueue(nvme_rdma_wq); } -- cgit v1.3-18-gd494 From 1bda18de8f15a611a61d1a935b679db2e153338a Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 5 Sep 2016 16:24:38 +0100 Subject: nvme-rdma: fix null pointer dereference on req->mr If there is an error on req->mr, req->mr is set to null, however the following statement sets req->mr->need_inval causing a null pointer dereference. Fix this by bailing out to label 'out' to immediately return and hence skip over the offending null pointer dereference. Fixes: f5b7b559e1488 ("nvme-rdma: Get rid of duplicate variable") Signed-off-by: Colin Ian King Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index d6bdf55a969e..c2c2c28e6eb5 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -293,6 +293,7 @@ static int nvme_rdma_reinit_request(void *data, struct request *rq) if (IS_ERR(req->mr)) { ret = PTR_ERR(req->mr); req->mr = NULL; + goto out; } req->mr->need_inval = false; -- cgit v1.3-18-gd494 From 2cfe199ca5a8816ee80fe15bcf202dd1020aaea0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 Sep 2016 14:58:06 +0200 Subject: nvme-rdma: add back dependency on CONFIG_BLOCK A recent change removed the dependency on BLK_DEV_NVME, which implies the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without CONFIG_BLOCK we get tons of build errors, e.g. In file included from drivers/nvme/host/core.c:16:0: linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] drivers/nvme/host/core.c: In function 'nvme_setup_rw': drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration] drivers/nvme/host/nvme.h: In function 'nvme_map_len': drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration] drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page': drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration] This adds back the specific CONFIG_BLOCK dependency to avoid broken configurations. Signed-off-by: Arnd Bergmann Fixes: aa71987472a9 ("nvme: fabrics drivers don't need the nvme-pci driver") Signed-off-by: Sagi Grimberg --- drivers/nvme/host/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig index 0c644f7bdf80..4b6cfff4b5be 100644 --- a/drivers/nvme/host/Kconfig +++ b/drivers/nvme/host/Kconfig @@ -31,6 +31,7 @@ config NVME_FABRICS config NVME_RDMA tristate "NVM Express over Fabrics RDMA host driver" depends on INFINIBAND + depends on BLOCK select NVME_CORE select NVME_FABRICS select SG_POOL -- cgit v1.3-18-gd494 From 5eb0d6eb3fac3daa60d9190eed9fa41cf809c756 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 13 Sep 2016 15:58:29 +0200 Subject: irqchip/atmel-aic: Fix potential deadlock in ->xlate() aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip lock without disabling interrupts, which can lead to a deadlock if an interrupt occurs while the lock is held in one of these functions. Replace irq_gc_{lock,unlock}() calls by irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from happening. Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by: Boris Brezillon Acked-by: Marc Zyngier Cc: Jason Cooper Cc: Nicolas Ferre Cc: stable@vger.kernel.org Cc: Alexandre Belloni Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-atmel-aic.c | 5 +++-- drivers/irqchip/irq-atmel-aic5.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-atmel-aic.c b/drivers/irqchip/irq-atmel-aic.c index 112e17c2768b..37f952dd9fc9 100644 --- a/drivers/irqchip/irq-atmel-aic.c +++ b/drivers/irqchip/irq-atmel-aic.c @@ -176,6 +176,7 @@ static int aic_irq_domain_xlate(struct irq_domain *d, { struct irq_domain_chip_generic *dgc = d->gc; struct irq_chip_generic *gc; + unsigned long flags; unsigned smr; int idx; int ret; @@ -194,11 +195,11 @@ static int aic_irq_domain_xlate(struct irq_domain *d, gc = dgc->gc[idx]; - irq_gc_lock(gc); + irq_gc_lock_irqsave(gc, flags); smr = irq_reg_readl(gc, AT91_AIC_SMR(*out_hwirq)); aic_common_set_priority(intspec[2], &smr); irq_reg_writel(gc, smr, AT91_AIC_SMR(*out_hwirq)); - irq_gc_unlock(gc); + irq_gc_unlock_irqrestore(gc, flags); return ret; } diff --git a/drivers/irqchip/irq-atmel-aic5.c b/drivers/irqchip/irq-atmel-aic5.c index 4f0d068e1abe..2a624d87a035 100644 --- a/drivers/irqchip/irq-atmel-aic5.c +++ b/drivers/irqchip/irq-atmel-aic5.c @@ -258,6 +258,7 @@ static int aic5_irq_domain_xlate(struct irq_domain *d, unsigned int *out_type) { struct irq_chip_generic *bgc = irq_get_domain_generic_chip(d, 0); + unsigned long flags; unsigned smr; int ret; @@ -269,12 +270,12 @@ static int aic5_irq_domain_xlate(struct irq_domain *d, if (ret) return ret; - irq_gc_lock(bgc); + irq_gc_lock_irqsave(bgc, flags); irq_reg_writel(bgc, *out_hwirq, AT91_AIC5_SSR); smr = irq_reg_readl(bgc, AT91_AIC5_SMR); aic_common_set_priority(intspec[2], &smr); irq_reg_writel(bgc, smr, AT91_AIC5_SMR); - irq_gc_unlock(bgc); + irq_gc_unlock_irqrestore(bgc, flags); return ret; } -- cgit v1.3-18-gd494 From 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 9 Sep 2016 22:43:12 +0800 Subject: bnx2: Reset device during driver initialization When system enters into kdump kernel because of kernel panic, it won't shutdown devices. On-flight DMA will continue transferring data until device driver initializes. All devices are supposed to reset during driver initialization. And this property is used to fix the kdump failure in system with intel iommu. Other systems with hardware iommu should be similar. Please check commit 091d42e ("iommu/vt-d: Copy translation tables from old kernel") and those commits around. But bnx2 driver doesn't reset device during driver initialization. The device resetting is deferred to net device up stage. This will cause hardware iommu handling failure on bnx2 device. And its resetting relies on firmware. So in this patch move the firmware requesting code to earlier bnx2_init_one(), then next call bnx2_reset_chip to reset device. Signed-off-by: Baoquan He Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 8fc3f3c137f8..505ceaf451e2 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6356,10 +6356,6 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto out; - netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6428,7 +6424,6 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); - bnx2_release_firmware(bp); goto out; } @@ -8575,6 +8570,12 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto error; + + + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8607,6 +8608,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: + bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v1.3-18-gd494 From 440f895aa97f81a2bdc02993da5360a1f6da2fb5 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Sun, 11 Sep 2016 21:43:34 +0200 Subject: drivers: net: phy: xgene: Fix 'remove' function If 'IS_ERR(pdata->clk)' is true, then 'clk_disable_unprepare(pdata->clk)' will do nothing. It is likely that 'if (!IS_ERR(pdata->clk))' was expected here. In fact, the test can even be removed because 'clk_disable_unprepare' already handles such cases. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/phy/mdio-xgene.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c index 775674808249..92af182951be 100644 --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -424,10 +424,8 @@ static int xgene_mdio_remove(struct platform_device *pdev) mdiobus_unregister(mdio_bus); mdiobus_free(mdio_bus); - if (dev->of_node) { - if (IS_ERR(pdata->clk)) - clk_disable_unprepare(pdata->clk); - } + if (dev->of_node) + clk_disable_unprepare(pdata->clk); return 0; } -- cgit v1.3-18-gd494 From 035ee288ae7ade4152f1c3cf23a587b04fdc526c Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 6 Sep 2016 06:20:46 +0200 Subject: PCI: Fix bridge_d3 update on device removal Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the port itself and its children satisfy a number of conditions. Once a child is removed, we recheck those conditions in case the removed device was blocking the port from suspending. The rechecking needs to happen *after* the device has been removed from the bus it resides on. Otherwise when walking the port's subordinate bus in pci_bridge_d3_update(), the device being removed would erroneously still be taken into account. However the device is removed from the bus_list in pci_destroy_dev() and we currently recheck *before* that. Fix it. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Acked-by: Rafael J. Wysocki --- drivers/pci/remove.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index d1ef7acf6930..f9357e09e9b3 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -40,6 +40,7 @@ static void pci_destroy_dev(struct pci_dev *dev) list_del(&dev->bus_list); up_write(&pci_bus_sem); + pci_bridge_d3_device_removed(dev); pci_free_resources(dev); put_device(&dev->dev); } @@ -96,8 +97,6 @@ static void pci_remove_bus_device(struct pci_dev *dev) dev->subordinate = NULL; } - pci_bridge_d3_device_removed(dev); - pci_destroy_dev(dev); } -- cgit v1.3-18-gd494 From 74712339a4fc0f4ddc710e6bca836a6b78b7d8de Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 25 Aug 2016 08:23:14 +0100 Subject: drm/i915: Restore lost "Initialized i915" welcome message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A side effect of removing the midlayer from driver loading was the loss of a useful message announcing to userspace that i915 had successfully started, e.g.: [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 Reported-by: Timo Aaltonen Signed-off-by: Chris Wilson Fixes: 8f460e2c78f2 ("drm/i915: Demidlayer driver loading") Cc: Daniel Vetter Cc: Ville Syrjälä Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter (cherry picked from commit bc5ca47c0af4f949ba889e666b7da65569e36093) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 95ddd56b89f0..5de36d8dcc68 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1281,6 +1281,11 @@ int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent) intel_runtime_pm_enable(dev_priv); + /* Everything is in place, we can now relax! */ + DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n", + driver.name, driver.major, driver.minor, driver.patchlevel, + driver.date, pci_name(pdev), dev_priv->drm.primary->index); + intel_runtime_pm_put(dev_priv); return 0; -- cgit v1.3-18-gd494 From 86dfb76cba284114cf586005cd943eeb6e4f328d Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 7 Sep 2016 17:42:31 -0700 Subject: Revert "drm/i915/psr: Make idle_frames sensible again" This reverts commit 1c80c25fb622973dd135878e98d172be20859049 Author: Daniel Vetter Date: Wed May 18 18:47:12 2016 +0200 drm/i915/psr: Make idle_frames sensible again There are panels that needs 4 idle frames before entering PSR, but VBT is unproperly set. Also lately it was identified that idle frame count calculated at HW can be off by 1, what makes the minimum of 2, at least. Without the current vbt+1 we are with the risk of having HW calculating 0 idle frames and entering PSR when it shouldn't. Regardless the lack of link training. [Jani: there is some disagreement on the explanation, but the commit regresses so revert it is.] References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net Cc: Dominik Brodowski Cc: Jani Nikula Cc: Daniel Vetter Signed-off-by: Rodrigo Vivi Fixes: 1c80c25fb622 ("drm/i915/psr: Make idle_frames sensible again") Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+ Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1473295351-8766-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 40918e0bb81be02f507a941f8b2741f0dc1771b0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_psr.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index 2b0d1baf15b3..cf171b4b8c67 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -255,14 +255,14 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = to_i915(dev); uint32_t max_sleep_time = 0x1f; - /* Lately it was identified that depending on panel idle frame count - * calculated at HW can be off by 1. So let's use what came - * from VBT + 1. - * There are also other cases where panel demands at least 4 - * but VBT is not being set. To cover these 2 cases lets use - * at least 5 when VBT isn't set to be on the safest side. + /* + * Let's respect VBT in case VBT asks a higher idle_frame value. + * Let's use 6 as the minimum to cover all known cases including + * the off-by-one issue that HW has in some cases. Also there are + * cases where sink should be able to train + * with the 5 or 6 idle patterns. */ - uint32_t idle_frames = dev_priv->vbt.psr.idle_frames + 1; + uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames); uint32_t val = EDP_PSR_ENABLE; val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT; -- cgit v1.3-18-gd494 From ea54ff4008892b46c7a3e6bc8ab8aaec9d198639 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 13 Sep 2016 12:22:19 +0300 Subject: drm/i915: Ignore OpRegion panel type except on select machines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Turns out commit a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") has regressed quite a few machines. So it looks like we can't use the panel type from OpRegion on all systems, and yet we absolutely must use it on some specific systems. Despite trying, I was unable to find any automagic way to determine if the OpRegion panel type is respectable or not. The only glimmer of hope I had was bit 8 in the SCIC response, but that turned out to not work either (it was always 0 on both types of systems). So, to fix the regressions without breaking the machine we know to need the OpRegion panel type, let's just add a quirk for this. Only specific machines known to require the OpRegion panel type will therefore use it. Everyone else will fall bck to the VBT panel type. The only known machine so far is a "Conrac GmbH IX45GM2". The PCI subsystem ID on this machine is just a generic 8086:2a42, so of no use. Instead we'll go with a DMI match. I suspect we can now also revert commit aeddda06c1a7 ("drm/i915: Ignore panel type from OpRegion on SKL") but let's leave that to a separate patch. v2: Do the DMI match in the opregion code directly, as dev_priv->quirks gets populated too late Cc: Rob Kramer Cc: Martin van Es Cc: Andrea Arcangeli Cc: Dave Airlie Cc: Marco Krüger Cc: Sean Greenslade Cc: Trudy Tective Cc: Robin Müller Cc: Alexander Kobel Cc: Alexey Shumitsky Cc: Emil Andersen Lauridsen Cc: oceans112@gmail.com Cc: James Hogan Cc: James Bottomley Cc: stable@vger.kernel.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363 Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") Tested-by: Marco Krüger Tested-by: Alexey Shumitsky Tested-by: Sean Greenslade Tested-by: Emil Andersen Lauridsen Tested-by: Robin Müller Tested-by: oceans112@gmail.com Tested-by: Rob Kramer Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.com Acked-by: Jani Nikula (cherry picked from commit c8ebfad7a063fe665417fa0eeb0da7cfe987d8ed) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_opregion.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index adca262d591a..7acbbbf97833 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -1047,6 +1047,23 @@ err_out: return err; } +static int intel_use_opregion_panel_type_callback(const struct dmi_system_id *id) +{ + DRM_INFO("Using panel type from OpRegion on %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_use_opregion_panel_type[] = { + { + .callback = intel_use_opregion_panel_type_callback, + .ident = "Conrac GmbH IX45GM2", + .matches = {DMI_MATCH(DMI_SYS_VENDOR, "Conrac GmbH"), + DMI_MATCH(DMI_PRODUCT_NAME, "IX45GM2"), + }, + }, + { } +}; + int intel_opregion_get_panel_type(struct drm_i915_private *dev_priv) { @@ -1072,6 +1089,16 @@ intel_opregion_get_panel_type(struct drm_i915_private *dev_priv) return -ENODEV; } + /* + * So far we know that some machined must use it, others must not use it. + * There doesn't seem to be any way to determine which way to go, except + * via a quirk list :( + */ + if (!dmi_check_system(intel_use_opregion_panel_type)) { + DRM_DEBUG_KMS("Ignoring OpRegion panel type (%d)\n", ret - 1); + return -ENODEV; + } + /* * FIXME On Dell XPS 13 9350 the OpRegion panel type (0) gives us * low vswing for eDP, whereas the VBT panel type (2) gives us normal -- cgit v1.3-18-gd494 From e5789608766113ca9c30d596d93ca7d5cbd8b461 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Sep 2016 14:22:07 +0300 Subject: mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap_hsmmc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 24ebc9a8de89..5f2f24a7360d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1409,11 +1409,18 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host, static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, struct mmc_request *req) { - struct dma_slave_config cfg; struct dma_async_tx_descriptor *tx; int ret = 0, i; struct mmc_data *data = req->data; struct dma_chan *chan; + struct dma_slave_config cfg = { + .src_addr = host->mapbase + OMAP_HSMMC_DATA, + .dst_addr = host->mapbase + OMAP_HSMMC_DATA, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = data->blksz / 4, + .dst_maxburst = data->blksz / 4, + }; /* Sanity check: all the SG entries must be aligned by block size. */ for (i = 0; i < data->sg_len; i++) { @@ -1433,13 +1440,6 @@ static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host, chan = omap_hsmmc_get_dma_chan(host, data); - cfg.src_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.dst_addr = host->mapbase + OMAP_HSMMC_DATA; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - cfg.src_maxburst = data->blksz / 4; - cfg.dst_maxburst = data->blksz / 4; - ret = dmaengine_slave_config(chan, &cfg); if (ret) return ret; -- cgit v1.3-18-gd494 From df804d5e27490151da1ce9f216031a31352203e6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 14 Sep 2016 14:21:54 +0300 Subject: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi Signed-off-by: Ulf Hansson --- drivers/mmc/host/omap.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index f23d65eb070d..be3c49fa7382 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1016,14 +1016,16 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) /* Only reconfigure if we have a different burst size */ if (*bp != burst) { - struct dma_slave_config cfg; - - cfg.src_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - cfg.dst_addr = host->phys_base + OMAP_MMC_REG(host, DATA); - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; - cfg.src_maxburst = burst; - cfg.dst_maxburst = burst; + struct dma_slave_config cfg = { + .src_addr = host->phys_base + + OMAP_MMC_REG(host, DATA), + .dst_addr = host->phys_base + + OMAP_MMC_REG(host, DATA), + .src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .src_maxburst = burst, + .dst_maxburst = burst, + }; if (dmaengine_slave_config(c, &cfg)) goto use_pio; -- cgit v1.3-18-gd494 From 7892a1f64a447b6f65fe2888688883b7c26d81d3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 9 Aug 2016 12:36:41 -0300 Subject: [media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success When resuming from suspend-to-RAM on r8a7795/salvator-x: dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1 PM: Device fe940000.fdp1 failed to resume noirq: error 1 dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1 PM: Device fe944000.fdp1 failed to resume noirq: error 1 dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1 PM: Device fe948000.fdp1 failed to resume noirq: error 1 According to its documentation, rcar_fcp_enable() returns 0 on success or a negative error code if an error occurs. Hence fdp1_pm_runtime_resume() and vsp1_pm_runtime_resume() forward its return value to their callers. However, rcar_fcp_enable() forwards the return value of pm_runtime_get_sync(), which can actually be 1 on success, leading to the resume failure above. To fix this, consider only negative values returned by pm_runtime_get_sync() to be failures. Fixes: 7b49235e83b2347c ("[media] v4l: Add Renesas R-Car FCP driver") Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/rcar-fcp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c index 6a7bcc3028b1..bc50c69ee0c5 100644 --- a/drivers/media/platform/rcar-fcp.c +++ b/drivers/media/platform/rcar-fcp.c @@ -99,10 +99,16 @@ EXPORT_SYMBOL_GPL(rcar_fcp_put); */ int rcar_fcp_enable(struct rcar_fcp_device *fcp) { + int error; + if (!fcp) return 0; - return pm_runtime_get_sync(fcp->dev); + error = pm_runtime_get_sync(fcp->dev); + if (error < 0) + return error; + + return 0; } EXPORT_SYMBOL_GPL(rcar_fcp_enable); -- cgit v1.3-18-gd494 From 54c5ef2e93ea002dc5dd63349298b2778fe59edb Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Wed, 10 Aug 2016 17:03:43 +0300 Subject: iwlwifi: mvm: update TX queue before making a copy of the skb Off-channel action frames (such as ANQP frames) must be sent either on the AUX queue or on the offchannel queue, otherwise the firmware will cause a SYSASSERT. In the current implementation, the queue to be used is correctly set in the original skb, but this is done after it is copied. Thus the copy remains with the original, incorrect queue. Fix this by setting the queue in the original skb before copying it. Fixes: commit 5c08b0f5026f ("iwlwifi: mvm: don't override the rate with the AMSDU len") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Beni Lev Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index c6585ab48df3..b3a87a31de30 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -513,6 +513,15 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) int hdrlen = ieee80211_hdrlen(hdr->frame_control); int queue; + /* IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used + * in 2 different types of vifs, P2P & STATION. P2P uses the offchannel + * queue. STATION (HS2.0) uses the auxiliary context of the FW, + * and hence needs to be sent on the aux queue + */ + if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE && + skb_info->control.vif->type == NL80211_IFTYPE_STATION) + IEEE80211_SKB_CB(skb)->hw_queue = mvm->aux_queue; + memcpy(&info, skb->cb, sizeof(info)); if (WARN_ON_ONCE(info.flags & IEEE80211_TX_CTL_AMPDU)) @@ -526,16 +535,6 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) /* This holds the amsdu headers length */ skb_info->driver_data[0] = (void *)(uintptr_t)0; - /* - * IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used - * in 2 different types of vifs, P2P & STATION. P2P uses the offchannel - * queue. STATION (HS2.0) uses the auxiliary context of the FW, - * and hence needs to be sent on the aux queue - */ - if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE && - info.control.vif->type == NL80211_IFTYPE_STATION) - IEEE80211_SKB_CB(skb)->hw_queue = mvm->aux_queue; - queue = info.hw_queue; /* -- cgit v1.3-18-gd494 From 778935778c3b88e5152a88765850009006ef2e32 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 26 Apr 2016 10:42:25 -0700 Subject: PM / runtime: Use _rcuidle for runtime suspend tracepoints Further testing with false negatives suppressed by commit 293e2421fe25 ("rcu: Remove superfluous versions of rcu_read_lock_sched_held()") identified a few more unprotected uses of RCU from the idle loop. Because RCU actively ignores idle-loop code (for energy-efficiency reasons, among other things), using RCU from the idle loop can result in too-short grace periods, in turn resulting in arbitrary misbehavior. The affected function is rpm_suspend(). The resulting lockdep-RCU splat is as follows: ------------------------------------------------------------------------ Warning from omap3 =============================== [ INFO: suspicious RCU usage. ] 4.6.0-rc5-next-20160426+ #1112 Not tainted ------------------------------- include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (&(&dev->power.lock)->rlock){-.-...}, at: [] __pm_runtime_suspend+0x54/0x84 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112 Hardware name: Generic OMAP36xx (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0xb0/0xe4) [] (dump_stack) from [] (rpm_suspend+0x604/0x7e4) [] (rpm_suspend) from [] (__pm_runtime_suspend+0x64/0x84) [] (__pm_runtime_suspend) from [] (omap2_gpio_prepare_for_idle+0x5c/0x70) [] (omap2_gpio_prepare_for_idle) from [] (omap_sram_idle+0x140/0x244) [] (omap_sram_idle) from [] (omap3_enter_idle_bm+0xfc/0x1ec) [] (omap3_enter_idle_bm) from [] (cpuidle_enter_state+0x80/0x3d4) [] (cpuidle_enter_state) from [] (cpu_startup_entry+0x198/0x3a0) [] (cpu_startup_entry) from [] (start_kernel+0x354/0x3c8) [] (start_kernel) from [<8000807c>] (0x8000807c) ------------------------------------------------------------------------ Reported-by: Tony Lindgren Signed-off-by: Paul E. McKenney Tested-by: Tony Lindgren Tested-by: Guenter Roeck [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 17995fadebd7..82a081ea4317 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -419,7 +419,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) struct device *parent = NULL; int retval; - trace_rpm_suspend(dev, rpmflags); + trace_rpm_suspend_rcuidle(dev, rpmflags); repeat: retval = rpm_check_suspend_allowed(dev); @@ -549,7 +549,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) } out: - trace_rpm_return_int(dev, _THIS_IP_, retval); + trace_rpm_return_int_rcuidle(dev, _THIS_IP_, retval); return retval; -- cgit v1.3-18-gd494 From 2a292822f00f7409fc0bd6b2d09efc5b8e6c9c5d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 14 Sep 2016 13:09:24 +0200 Subject: net/mlx4_en: fix off by one in error handling If an error occurs in mlx4_init_eq_table the index used in the err_out_unmap label is one too big which results in a panic in mlx4_free_eq. This patch fixes the index in the error path. Signed-off-by: Sebastian Ott Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/eq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index f613977455e0..cf8f8a72a801 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1305,8 +1305,8 @@ int mlx4_init_eq_table(struct mlx4_dev *dev) return 0; err_out_unmap: - while (i >= 0) - mlx4_free_eq(dev, &priv->eq_table.eq[i--]); + while (i > 0) + mlx4_free_eq(dev, &priv->eq_table.eq[--i]); #ifdef CONFIG_RFS_ACCEL for (i = 1; i <= dev->caps.num_ports; i++) { if (mlx4_priv(dev)->port[i].rmap) { -- cgit v1.3-18-gd494 From 7077dc415b113ac17a6696c432bad2d66574e4fb Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Wed, 14 Sep 2016 21:29:34 +0800 Subject: net: ethernet: mediatek: fix module loading automatically based on MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to modules.alias: alias of:N*T*Cmediatek,mt7623-ethC* mtk_eth_soc Signed-off-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index d9199151a83e..3743af8f1ded 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1923,6 +1923,7 @@ const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt7623-eth" }, {}, }; +MODULE_DEVICE_TABLE(of, of_mtk_match); static struct platform_driver mtk_driver = { .probe = mtk_probe, -- cgit v1.3-18-gd494 From 01afd972a737879c1466a12f696601a2ce91ea84 Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:44 +0300 Subject: net/ibm/emac: add set mac addr callback add realization for mac address set and remove dummy callback. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 4c9771d57d6e..2dfc60308648 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -980,6 +980,33 @@ static void emac_set_multicast_list(struct net_device *ndev) __emac_set_multicast_list(dev); } +static int emac_set_mac_address(struct net_device *ndev, void *sa) +{ + struct emac_instance *dev = netdev_priv(ndev); + struct sockaddr *addr = sa; + struct emac_regs __iomem *p = dev->emacp; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + mutex_lock(&dev->link_lock); + + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + + emac_rx_disable(dev); + emac_tx_disable(dev); + out_be32(&p->iahr, (ndev->dev_addr[0] << 8) | ndev->dev_addr[1]); + out_be32(&p->ialr, (ndev->dev_addr[2] << 24) | + (ndev->dev_addr[3] << 16) | (ndev->dev_addr[4] << 8) | + ndev->dev_addr[5]); + emac_tx_enable(dev); + emac_rx_enable(dev); + + mutex_unlock(&dev->link_lock); + + return 0; +} + static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu) { int rx_sync_size = emac_rx_sync_size(new_mtu); @@ -2686,7 +2713,7 @@ static const struct net_device_ops emac_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit, .ndo_change_mtu = eth_change_mtu, }; @@ -2699,7 +2726,7 @@ static const struct net_device_ops emac_gige_netdev_ops = { .ndo_do_ioctl = emac_ioctl, .ndo_tx_timeout = emac_tx_timeout, .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = emac_set_mac_address, .ndo_start_xmit = emac_start_xmit_sg, .ndo_change_mtu = emac_change_mtu, }; -- cgit v1.3-18-gd494 From 7106a069f45b15e63d14484e72969e64798e641c Mon Sep 17 00:00:00 2001 From: Ivan Mikhaylov Date: Wed, 14 Sep 2016 19:06:45 +0300 Subject: net/ibm/emac: add mutex to 'set multicast list' for preventing race conditions within ioctl calls. Signed-off-by: Ivan Mikhaylov Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/emac/core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c index 2dfc60308648..7af09cbc53f0 100644 --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -977,7 +977,10 @@ static void emac_set_multicast_list(struct net_device *ndev) dev->mcast_pending = 1; return; } + + mutex_lock(&dev->link_lock); __emac_set_multicast_list(dev); + mutex_unlock(&dev->link_lock); } static int emac_set_mac_address(struct net_device *ndev, void *sa) -- cgit v1.3-18-gd494 From bc6c03fa3cacd31b873e36ca16ef9678269deae6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 15 Sep 2016 03:45:07 +0000 Subject: nfp: fix error return code in nfp_net_netdev_open() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 73725d9dfd99 ("nfp: allocate ring SW structs dynamically") Signed-off-by: Wei Yongjun Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index 252e4924de0f..39dadfca84ef 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2044,12 +2044,16 @@ static int nfp_net_netdev_open(struct net_device *netdev) nn->rx_rings = kcalloc(nn->num_rx_rings, sizeof(*nn->rx_rings), GFP_KERNEL); - if (!nn->rx_rings) + if (!nn->rx_rings) { + err = -ENOMEM; goto err_free_lsc; + } nn->tx_rings = kcalloc(nn->num_tx_rings, sizeof(*nn->tx_rings), GFP_KERNEL); - if (!nn->tx_rings) + if (!nn->tx_rings) { + err = -ENOMEM; goto err_free_rx_rings; + } for (r = 0; r < nn->num_r_vecs; r++) { err = nfp_net_prepare_vector(nn, &nn->r_vecs[r], r); -- cgit v1.3-18-gd494 From e830baa9c3f0023769ba9aab19eb44c892769d87 Mon Sep 17 00:00:00 2001 From: Hans Wippel Date: Thu, 15 Sep 2016 14:39:21 +0200 Subject: qeth: restore device features after recovery After device recovery, only a basic set of network device features is enabled on the device. If features like checksum offloading or TSO were enabled by the user before the recovery, this results in a mismatch between the network device features, that the kernel assumes to be enabled on the device, and the features actually enabled on the device. This patch tries to restore previously set features, that require changes on the device, after the recovery of a device. In case of an error, the network device's features are changed to contain only the features that are actually turned on. Signed-off-by: Hans Wippel Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core.h | 1 + drivers/s390/net/qeth_core_main.c | 29 +++++++++++++++++++++++++++++ drivers/s390/net/qeth_l2_main.c | 3 +++ drivers/s390/net/qeth_l3_main.c | 1 + 4 files changed, 34 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index bf40063de202..6d4b68c483f3 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -999,6 +999,7 @@ struct qeth_cmd_buffer *qeth_get_setassparms_cmd(struct qeth_card *, __u16, __u16, enum qeth_prot_versions); int qeth_set_features(struct net_device *, netdev_features_t); +int qeth_recover_features(struct net_device *); netdev_features_t qeth_fix_features(struct net_device *, netdev_features_t); /* exports for OSN */ diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7dba6c8537a1..6ad5a14669e7 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -6131,6 +6131,35 @@ static int qeth_set_ipa_tso(struct qeth_card *card, int on) return rc; } +/* try to restore device features on a device after recovery */ +int qeth_recover_features(struct net_device *dev) +{ + struct qeth_card *card = dev->ml_priv; + netdev_features_t recover = dev->features; + + if (recover & NETIF_F_IP_CSUM) { + if (qeth_set_ipa_csum(card, 1, IPA_OUTBOUND_CHECKSUM)) + recover ^= NETIF_F_IP_CSUM; + } + if (recover & NETIF_F_RXCSUM) { + if (qeth_set_ipa_csum(card, 1, IPA_INBOUND_CHECKSUM)) + recover ^= NETIF_F_RXCSUM; + } + if (recover & NETIF_F_TSO) { + if (qeth_set_ipa_tso(card, 1)) + recover ^= NETIF_F_TSO; + } + + if (recover == dev->features) + return 0; + + dev_warn(&card->gdev->dev, + "Device recovery failed to restore all offload features\n"); + dev->features = recover; + return -EIO; +} +EXPORT_SYMBOL_GPL(qeth_recover_features); + int qeth_set_features(struct net_device *dev, netdev_features_t features) { struct qeth_card *card = dev->ml_priv; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 7bc20c5188bc..54fd89110ac7 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1246,6 +1246,9 @@ contin: } /* this also sets saved unicast addresses */ qeth_l2_set_rx_mode(card->dev); + rtnl_lock(); + qeth_recover_features(card->dev); + rtnl_unlock(); } /* let user_space know that device is online */ kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 72934666fedf..2f512715403b 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3269,6 +3269,7 @@ contin: else dev_open(card->dev); qeth_l3_set_multicast_list(card->dev); + qeth_recover_features(card->dev); rtnl_unlock(); } qeth_trace_features(card); -- cgit v1.3-18-gd494 From 016930b88a1d6eb6e6b3287d593e13ca06986acc Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 15 Sep 2016 14:39:22 +0200 Subject: s390/qeth: use ip_lock for hsuid configuration qeth_l3_dev_hsuid_store() changes the ip hash table, which requires the ip_lock. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_sys.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 65645b11fc19..0e00a5ce0f00 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -297,7 +297,9 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev, addr->u.a6.pfxlen = 0; addr->type = QETH_IP_TYPE_NORMAL; + spin_lock_bh(&card->ip_lock); qeth_l3_delete_ip(card, addr); + spin_unlock_bh(&card->ip_lock); kfree(addr); } @@ -329,7 +331,10 @@ static ssize_t qeth_l3_dev_hsuid_store(struct device *dev, addr->type = QETH_IP_TYPE_NORMAL; } else return -ENOMEM; + + spin_lock_bh(&card->ip_lock); qeth_l3_add_ip(card, addr); + spin_unlock_bh(&card->ip_lock); kfree(addr); return count; -- cgit v1.3-18-gd494 From a7531c1cc09855df5e33ceefe4fdfc2d74ccab19 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 15 Sep 2016 14:39:23 +0200 Subject: s390/qeth: allow hsuid configuration in DOWN state The qeth IP address mapping logic has been reworked recently. It causes now problems to specify qeth sysfs attribute "hsuid" in DOWN state, which is allowed. Postpone registering or deregistering of IP-addresses in this case. Signed-off-by: Ursula Braun Reviewed-by: Thomas Richter Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 2f512715403b..4ba82e12d6f9 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -257,6 +257,11 @@ int qeth_l3_delete_ip(struct qeth_card *card, struct qeth_ipaddr *tmp_addr) if (addr->in_progress) return -EINPROGRESS; + if (!qeth_card_hw_is_reachable(card)) { + addr->disp_flag = QETH_DISP_ADDR_DELETE; + return 0; + } + rc = qeth_l3_deregister_addr_entry(card, addr); hash_del(&addr->hnode); @@ -296,6 +301,11 @@ int qeth_l3_add_ip(struct qeth_card *card, struct qeth_ipaddr *tmp_addr) hash_add(card->ip_htable, &addr->hnode, qeth_l3_ipaddr_hash(addr)); + if (!qeth_card_hw_is_reachable(card)) { + addr->disp_flag = QETH_DISP_ADDR_ADD; + return 0; + } + /* qeth_l3_register_addr_entry can go to sleep * if we add a IPV4 addr. It is caused by the reason * that SETIP ipa cmd starts ARP staff for IPV4 addr. @@ -390,12 +400,16 @@ static void qeth_l3_recover_ip(struct qeth_card *card) int i; int rc; - QETH_CARD_TEXT(card, 4, "recoverip"); + QETH_CARD_TEXT(card, 4, "recovrip"); spin_lock_bh(&card->ip_lock); hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) { - if (addr->disp_flag == QETH_DISP_ADDR_ADD) { + if (addr->disp_flag == QETH_DISP_ADDR_DELETE) { + qeth_l3_deregister_addr_entry(card, addr); + hash_del(&addr->hnode); + kfree(addr); + } else if (addr->disp_flag == QETH_DISP_ADDR_ADD) { if (addr->proto == QETH_PROT_IPV4) { addr->in_progress = 1; spin_unlock_bh(&card->ip_lock); @@ -407,10 +421,8 @@ static void qeth_l3_recover_ip(struct qeth_card *card) if (!rc) { addr->disp_flag = QETH_DISP_ADDR_DO_NOTHING; - if (addr->ref_counter < 1) { + if (addr->ref_counter < 1) qeth_l3_delete_ip(card, addr); - kfree(addr); - } } else { hash_del(&addr->hnode); kfree(addr); -- cgit v1.3-18-gd494 From 903e48531e8b5d414c8f1960eacac24c31f60344 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 15 Sep 2016 14:39:24 +0200 Subject: qeth: check not more than 16 SBALEs on the completion queue af_iucv socket programs with HiperSockets as transport make use of the qdio completion queue. Running such an af_iucv socket program may result in a crash: [90341.677709] Oops: 0038 ilc:2 [#1] SMP [90341.677743] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.6.0-20160720.0.0e86ec7.5e62689.fc23.s390xperformance #1 [90341.677744] Hardware name: IBM 2964 N96 703 (LPAR) [90341.677746] task: 00000000edb79f00 ti: 00000000edb84000 task.ti: 00000000edb84000 [90341.677748] Krnl PSW : 0704d00180000000 000000000075bc50 (qeth_qdio_input_handler+0x258/0x4e0) [90341.677756] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 000003d10391e900 0000000000000001 00000000e61e6000 0000000000000005 [90341.677759] 0000000000a9e6ec 5420040001a77400 0000000000000001 000000000000006f [90341.677761] 00000000e0d83f00 0000000000000003 0000000000000010 5420040001a77400 [90341.677784] 000000007ba8b000 0000000000943fd0 000000000075bc4e 00000000ed3b3c10 [90341.677793] Krnl Code: 000000000075bc42: e320cc180004 lg %r2,3096(%r12) 000000000075bc48: c0e5ffffc5cc brasl %r14,7547e0 #000000000075bc4e: 1816 lr %r1,%r6 >000000000075bc50: ba19b008 cs %r1,%r9,8(%r11) 000000000075bc54: ec180041017e cij %r1,1,8,75bcd6 000000000075bc5a: 5810b008 l %r1,8(%r11) 000000000075bc5e: ec16005c027e cij %r1,2,6,75bd16 000000000075bc64: 5090b008 st %r9,8(%r11) [90341.677807] Call Trace: [90341.677810] ([<000000000075bbc0>] qeth_qdio_input_handler+0x1c8/0x4e0) [90341.677812] ([<000000000070efbc>] qdio_kick_handler+0x124/0x2a8) [90341.677814] ([<0000000000713570>] __tiqdio_inbound_processing+0xf0/0xcd0) [90341.677818] ([<0000000000143312>] tasklet_action+0x92/0x120) [90341.677823] ([<00000000008b6e72>] __do_softirq+0x112/0x308) [90341.677824] ([<0000000000142bce>] irq_exit+0xd6/0xf8) [90341.677829] ([<000000000010b1d2>] do_IRQ+0x6a/0x88) [90341.677830] ([<00000000008b6322>] io_int_handler+0x112/0x220) [90341.677832] ([<0000000000102b2e>] enabled_wait+0x56/0xa8) [90341.677833] ([<0000000000000000>] (null)) [90341.677835] ([<0000000000102e32>] arch_cpu_idle+0x32/0x48) [90341.677838] ([<000000000018a126>] cpu_startup_entry+0x266/0x2b0) [90341.677841] ([<0000000000113b38>] smp_start_secondary+0x100/0x110) [90341.677843] ([<00000000008b68a6>] restart_int_handler+0x62/0x78) [90341.677845] ([<00000000008b6588>] psw_idle+0x3c/0x40) [90341.677846] Last Breaking-Event-Address: [90341.677848] [<00000000007547ec>] qeth_dbf_longtext+0xc/0xc0 [90341.677849] [90341.677850] Kernel panic - not syncing: Fatal exception in interrupt qeth_qdio_cq_handler() analyzes SBALs on this completion queue, but does not observe the limit of 16 SBAL elements per SBAL. This patch adds the additional check to process not more than 16 SBAL elements. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 6ad5a14669e7..20cf29613043 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3619,7 +3619,8 @@ static void qeth_qdio_cq_handler(struct qeth_card *card, int e; e = 0; - while (buffer->element[e].addr) { + while ((e < QDIO_MAX_ELEMENTS_PER_BUFFER) && + buffer->element[e].addr) { unsigned long phys_aob_addr; phys_aob_addr = (unsigned long) buffer->element[e].addr; -- cgit v1.3-18-gd494 From 243f750fc6f5d8e4dec984a9a785941c67452b8f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 15 Sep 2016 14:39:25 +0200 Subject: qeth: do not limit number of gso segments To reduce the need of skb_linearize() calls, gso_max_segs of qeth net_devices had been limited according to the maximum number of qdio SBAL elements. But a gso segment cannot be larger than the mtu-size, while an SBAL element can contain up to 4096 bytes. The gso_max_segs limitation limits the maximum packet size given to the qeth driver. Performance measurements with tso-enabled qeth network interfaces and mtu-size 1500 showed, that the disadvantage of smaller packets is much more severe than the advantage of fewer skb_linearize() calls. This patch gets rid of the gso_max_segs limitations in the qeth driver. Signed-off-by: Ursula Braun Reviewed-by: Thomas Richter Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 1 - drivers/s390/net/qeth_l3_main.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 54fd89110ac7..2081c1895638 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1131,7 +1131,6 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) qeth_l2_request_initial_mac(card); card->dev->gso_max_size = (QETH_MAX_BUFFER_ELEMENTS(card) - 1) * PAGE_SIZE; - card->dev->gso_max_segs = (QETH_MAX_BUFFER_ELEMENTS(card) - 1); SET_NETDEV_DEV(card->dev, &card->gdev->dev); netif_napi_add(card->dev, &card->napi, qeth_l2_poll, QETH_NAPI_WEIGHT); netif_carrier_off(card->dev); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 4ba82e12d6f9..0cbbc803310f 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3148,7 +3148,6 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) netif_keep_dst(card->dev); card->dev->gso_max_size = (QETH_MAX_BUFFER_ELEMENTS(card) - 1) * PAGE_SIZE; - card->dev->gso_max_segs = (QETH_MAX_BUFFER_ELEMENTS(card) - 1); SET_NETDEV_DEV(card->dev, &card->gdev->dev); netif_napi_add(card->dev, &card->napi, qeth_l3_poll, QETH_NAPI_WEIGHT); -- cgit v1.3-18-gd494 From 5722963a8e83309dad831cf6968c4c805aa342c0 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 15 Sep 2016 14:39:26 +0200 Subject: qeth: do not turn on SG per default According to recent performance measurements, turning on net_device feature NETIF_F_SG only behaves well, but turning on feature NETIF_F_GSO shows bad results. Since the kernel activates NETIF_F_GSO automatically as soon as the driver configures feature NETIF_F_SG, qeth should not activate feature NETIF_F_SG per default, until the qeth problems with NETIF_F_GSO are solved. Signed-off-by: Ursula Braun Reviewed-by: Thomas Richter Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 2 -- drivers/s390/net/qeth_l3_main.c | 1 - 2 files changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2081c1895638..bb27058fa9f0 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1124,8 +1124,6 @@ static int qeth_l2_setup_netdev(struct qeth_card *card) card->dev->hw_features |= NETIF_F_RXCSUM; card->dev->vlan_features |= NETIF_F_RXCSUM; } - /* Turn on SG per default */ - card->dev->features |= NETIF_F_SG; } card->info.broadcast_capable = 1; qeth_l2_request_initial_mac(card); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 0cbbc803310f..c00f6db812ac 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3120,7 +3120,6 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) card->dev->vlan_features = NETIF_F_SG | NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_TSO; - card->dev->features = NETIF_F_SG; } } } else if (card->info.type == QETH_CARD_TYPE_IQD) { -- cgit v1.3-18-gd494 From 732a59cb6e7faed7a40da6665a517945c95fc895 Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Thu, 15 Sep 2016 14:39:27 +0200 Subject: s390/qeth: fix setting VIPA address commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") restructured the internal address handling. This work broke setting a virtual IP address. The command echo 10.1.1.1 > /sys/bus/ccwgroup/devices//vipa/add4 fails with file exist error even if the IP address has not been set before. It turned out that the search result for the IP address search is handled incorrectly in the VIPA case. This patch fixes the setting of an virtual IP address. Signed-off-by: Thomas Richter Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index c00f6db812ac..272d9e7419be 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -701,7 +701,7 @@ int qeth_l3_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, spin_lock_bh(&card->ip_lock); - if (!qeth_l3_ip_from_hash(card, ipaddr)) + if (qeth_l3_ip_from_hash(card, ipaddr)) rc = -EEXIST; else qeth_l3_add_ip(card, ipaddr); @@ -769,7 +769,7 @@ int qeth_l3_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, spin_lock_bh(&card->ip_lock); - if (!qeth_l3_ip_from_hash(card, ipaddr)) + if (qeth_l3_ip_from_hash(card, ipaddr)) rc = -EEXIST; else qeth_l3_add_ip(card, ipaddr); -- cgit v1.3-18-gd494 From ed3d6d0ac036bcff6e4649a6f8fb987bb4e34444 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Sep 2016 09:24:44 -0500 Subject: usb: musb: Fix tusb6010 compile error on blackfin We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 886526b5fcdd..73cfa13fc0dc 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -87,7 +87,7 @@ config USB_MUSB_DA8XX config USB_MUSB_TUSB6010 tristate "TUSB6010" depends on HAS_IOMEM - depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on (ARCH_OMAP2PLUS || COMPILE_TEST) && !BLACKFIN depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules config USB_MUSB_OMAP2PLUS -- cgit v1.3-18-gd494 From 08c5cd37480f59ea39682f4585d92269be6b1424 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Sep 2016 10:24:26 -0400 Subject: USB: change bInterval default to 10 ms Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern Tested-by: Wade Berrier CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 15ce4ab11688..a2d90aca779f 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -240,8 +240,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); - /* Fix up bInterval values outside the legal range. Use 32 ms if no - * proper value can be guessed. */ + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ i = 0; /* i = min, j = max, n = default */ j = 255; if (usb_endpoint_xfer_int(d)) { @@ -250,13 +252,15 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: case USB_SPEED_HIGH: - /* Many device manufacturers are using full-speed + /* + * Many device manufacturers are using full-speed * bInterval values in high-speed interrupt endpoint - * descriptors. Try to fix those and fall back to a - * 32 ms default value otherwise. */ + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ n = fls(d->bInterval*8); if (n == 0) - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ j = 16; /* @@ -271,10 +275,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } break; default: /* USB_SPEED_FULL or _LOW */ - /* For low-speed, 10 ms is the official minimum. + /* + * For low-speed, 10 ms is the official minimum. * But some "overclocked" devices might want faster - * polling so we'll allow it. */ - n = 32; + * polling so we'll allow it. + */ + n = 10; break; } } else if (usb_endpoint_xfer_isoc(d)) { @@ -282,10 +288,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, j = 16; switch (to_usb_device(ddev)->speed) { case USB_SPEED_HIGH: - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ break; default: /* USB_SPEED_FULL */ - n = 6; /* 32 ms = 2^(6-1) frames */ + n = 4; /* 8 ms = 2^(4-1) frames */ break; } } -- cgit v1.3-18-gd494 From 5e102b3b4fa944815aead89e63eec2a35069a07b Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 2 Sep 2016 23:46:53 +0300 Subject: IB/rxe: fix GFP_KERNEL in spinlock context There is skb_clone(skb, GFP_KERNEL) in spinlock context in rxe_rcv_mcast_pkt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Moni Shoua Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c index 3d464c23e08b..144d2f129fcd 100644 --- a/drivers/infiniband/sw/rxe/rxe_recv.c +++ b/drivers/infiniband/sw/rxe/rxe_recv.c @@ -312,7 +312,7 @@ static void rxe_rcv_mcast_pkt(struct rxe_dev *rxe, struct sk_buff *skb) * make a copy of the skb to post to the next qp */ skb_copy = (mce->qp_list.next != &mcg->qp_list) ? - skb_clone(skb, GFP_KERNEL) : NULL; + skb_clone(skb, GFP_ATOMIC) : NULL; pkt->qp = qp; rxe_add_ref(qp); -- cgit v1.3-18-gd494 From 344bacca8cd811809fc33a249f2738ab757d327f Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Mon, 12 Sep 2016 09:55:28 +0300 Subject: IB/ipoib: Don't allow MC joins during light MC flush This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [] dump_stack+0x63/0x8c [18332.801831] [] __warn+0xd1/0xf0 [18332.805403] [] warn_slowpath_null+0x1d/0x20 [18332.809706] [] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [] rollback_registered+0x31/0x40 [18332.844091] [] unregister_netdevice_queue+0x48/0x80 [18332.848880] [] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [] dev_attr_store+0x18/0x30 [18332.862510] [] sysfs_kf_write+0x3a/0x50 [18332.866349] [] kernfs_fop_write+0x120/0x170 [18332.870471] [] __vfs_write+0x28/0xe0 [18332.874152] [] ? percpu_down_read+0x1f/0x50 [18332.878274] [] vfs_write+0xa2/0x1a0 [18332.881896] [] SyS_write+0x46/0xa0 [18332.885632] [] do_syscall_64+0x57/0xb0 [18332.889709] [] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index dc6d241b9406..be11d5d5b8c1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -1161,8 +1161,17 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, } if (level == IPOIB_FLUSH_LIGHT) { + int oper_up; ipoib_mark_paths_invalid(dev); + /* Set IPoIB operation as down to prevent races between: + * the flush flow which leaves MCG and on the fly joins + * which can happen during that time. mcast restart task + * should deal with join requests we missed. + */ + oper_up = test_and_clear_bit(IPOIB_FLAG_OPER_UP, &priv->flags); ipoib_mcast_dev_flush(dev); + if (oper_up) + set_bit(IPOIB_FLAG_OPER_UP, &priv->flags); ipoib_flush_ah(dev); } -- cgit v1.3-18-gd494 From e5ac40cd66c2f3cd11bc5edc658f012661b16347 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Mon, 12 Sep 2016 19:16:18 +0300 Subject: IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV Because of an incorrect bit-masking done on the join state bits, when handling a join request we failed to detect a difference between the group join state and the request join state when joining as send only full member (0x8). This caused the MC join request not to be sent. This issue is relevant only when SRIOV is enabled and SM supports send only full member. This fix separates scope bits and join states bits a nibble each. Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by: Alex Vesker Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mcg.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mcg.c b/drivers/infiniband/hw/mlx4/mcg.c index 8f7ad07915b0..097bfcc4ee99 100644 --- a/drivers/infiniband/hw/mlx4/mcg.c +++ b/drivers/infiniband/hw/mlx4/mcg.c @@ -489,7 +489,7 @@ static u8 get_leave_state(struct mcast_group *group) if (!group->members[i]) leave_state |= (1 << i); - return leave_state & (group->rec.scope_join_state & 7); + return leave_state & (group->rec.scope_join_state & 0xf); } static int join_group(struct mcast_group *group, int slave, u8 join_mask) @@ -564,8 +564,8 @@ static void mlx4_ib_mcg_timeout_handler(struct work_struct *work) } else mcg_warn_group(group, "DRIVER BUG\n"); } else if (group->state == MCAST_LEAVE_SENT) { - if (group->rec.scope_join_state & 7) - group->rec.scope_join_state &= 0xf8; + if (group->rec.scope_join_state & 0xf) + group->rec.scope_join_state &= 0xf0; group->state = MCAST_IDLE; mutex_unlock(&group->lock); if (release_group(group, 1)) @@ -605,7 +605,7 @@ static int handle_leave_req(struct mcast_group *group, u8 leave_mask, static int handle_join_req(struct mcast_group *group, u8 join_mask, struct mcast_req *req) { - u8 group_join_state = group->rec.scope_join_state & 7; + u8 group_join_state = group->rec.scope_join_state & 0xf; int ref = 0; u16 status; struct ib_sa_mcmember_data *sa_data = (struct ib_sa_mcmember_data *)req->sa_mad.data; @@ -690,8 +690,8 @@ static void mlx4_ib_mcg_work_handler(struct work_struct *work) u8 cur_join_state; resp_join_state = ((struct ib_sa_mcmember_data *) - group->response_sa_mad.data)->scope_join_state & 7; - cur_join_state = group->rec.scope_join_state & 7; + group->response_sa_mad.data)->scope_join_state & 0xf; + cur_join_state = group->rec.scope_join_state & 0xf; if (method == IB_MGMT_METHOD_GET_RESP) { /* successfull join */ @@ -710,7 +710,7 @@ process_requests: req = list_first_entry(&group->pending_list, struct mcast_req, group_list); sa_data = (struct ib_sa_mcmember_data *)req->sa_mad.data; - req_join_state = sa_data->scope_join_state & 0x7; + req_join_state = sa_data->scope_join_state & 0xf; /* For a leave request, we will immediately answer the VF, and * update our internal counters. The actual leave will be sent -- cgit v1.3-18-gd494 From baa0be7026e2f7d1d40bfd45909044169e9e3c68 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 12 Sep 2016 19:16:19 +0300 Subject: IB/mlx4: Fix code indentation in QP1 MAD flow The indentation in the QP1 GRH flow in procedure build_mlx_header is really confusing. Fix it, in preparation for a commit which touches this code. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/qp.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 768085f59566..e398c04903fa 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -2493,24 +2493,26 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_ud_wr *wr, sqp->ud_header.grh.flow_label = ah->av.ib.sl_tclass_flowlabel & cpu_to_be32(0xfffff); sqp->ud_header.grh.hop_limit = ah->av.ib.hop_limit; - if (is_eth) + if (is_eth) { memcpy(sqp->ud_header.grh.source_gid.raw, sgid.raw, 16); - else { - if (mlx4_is_mfunc(to_mdev(ib_dev)->dev)) { - /* When multi-function is enabled, the ib_core gid - * indexes don't necessarily match the hw ones, so - * we must use our own cache */ - sqp->ud_header.grh.source_gid.global.subnet_prefix = - to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. - subnet_prefix; - sqp->ud_header.grh.source_gid.global.interface_id = - to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. - guid_cache[ah->av.ib.gid_index]; - } else - ib_get_cached_gid(ib_dev, - be32_to_cpu(ah->av.ib.port_pd) >> 24, - ah->av.ib.gid_index, - &sqp->ud_header.grh.source_gid, NULL); + } else { + if (mlx4_is_mfunc(to_mdev(ib_dev)->dev)) { + /* When multi-function is enabled, the ib_core gid + * indexes don't necessarily match the hw ones, so + * we must use our own cache + */ + sqp->ud_header.grh.source_gid.global.subnet_prefix = + to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. + subnet_prefix; + sqp->ud_header.grh.source_gid.global.interface_id = + to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. + guid_cache[ah->av.ib.gid_index]; + } else { + ib_get_cached_gid(ib_dev, + be32_to_cpu(ah->av.ib.port_pd) >> 24, + ah->av.ib.gid_index, + &sqp->ud_header.grh.source_gid, NULL); + } } memcpy(sqp->ud_header.grh.destination_gid.raw, ah->av.ib.dgid, 16); -- cgit v1.3-18-gd494 From 8ec07bf8a8b57d6c58927a16a0a22c0115cf2855 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 12 Sep 2016 19:16:20 +0300 Subject: IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/mad.c | 23 +++++++++++++++++++++++ drivers/infiniband/hw/mlx4/mlx4_ib.h | 2 +- drivers/infiniband/hw/mlx4/qp.c | 5 +++-- 3 files changed, 27 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index 9c2e53d28f98..0f21c3a25552 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -1128,6 +1128,27 @@ void handle_port_mgmt_change_event(struct work_struct *work) /* Generate GUID changed event */ if (changed_attr & MLX4_EQ_PORT_INFO_GID_PFX_CHANGE_MASK) { + if (mlx4_is_master(dev->dev)) { + union ib_gid gid; + int err = 0; + + if (!eqe->event.port_mgmt_change.params.port_info.gid_prefix) + err = __mlx4_ib_query_gid(&dev->ib_dev, port, 0, &gid, 1); + else + gid.global.subnet_prefix = + eqe->event.port_mgmt_change.params.port_info.gid_prefix; + if (err) { + pr_warn("Could not change QP1 subnet prefix for port %d: query_gid error (%d)\n", + port, err); + } else { + pr_debug("Changing QP1 subnet prefix for port %d. old=0x%llx. new=0x%llx\n", + port, + (u64)atomic64_read(&dev->sriov.demux[port - 1].subnet_prefix), + be64_to_cpu(gid.global.subnet_prefix)); + atomic64_set(&dev->sriov.demux[port - 1].subnet_prefix, + be64_to_cpu(gid.global.subnet_prefix)); + } + } mlx4_ib_dispatch_event(dev, port, IB_EVENT_GID_CHANGE); /*if master, notify all slaves*/ if (mlx4_is_master(dev->dev)) @@ -2202,6 +2223,8 @@ int mlx4_ib_init_sriov(struct mlx4_ib_dev *dev) if (err) goto demux_err; dev->sriov.demux[i].guid_cache[0] = gid.global.interface_id; + atomic64_set(&dev->sriov.demux[i].subnet_prefix, + be64_to_cpu(gid.global.subnet_prefix)); err = alloc_pv_object(dev, mlx4_master_func_num(dev->dev), i + 1, &dev->sriov.sqps[i]); if (err) diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 7c5832ede4bd..686ab48ff644 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -448,7 +448,7 @@ struct mlx4_ib_demux_ctx { struct workqueue_struct *wq; struct workqueue_struct *ud_wq; spinlock_t ud_lock; - __be64 subnet_prefix; + atomic64_t subnet_prefix; __be64 guid_cache[128]; struct mlx4_ib_dev *dev; /* the following lock protects both mcg_table and mcg_mgid0_list */ diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index e398c04903fa..7fb9629bd12b 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -2502,8 +2502,9 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_ud_wr *wr, * we must use our own cache */ sqp->ud_header.grh.source_gid.global.subnet_prefix = - to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. - subnet_prefix; + cpu_to_be64(atomic64_read(&(to_mdev(ib_dev)->sriov. + demux[sqp->qp.port - 1]. + subnet_prefix))); sqp->ud_header.grh.source_gid.global.interface_id = to_mdev(ib_dev)->sriov.demux[sqp->qp.port - 1]. guid_cache[ah->av.ib.gid_index]; -- cgit v1.3-18-gd494 From 69d269d38910e697e461ec5677368f57d2046cbe Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Mon, 12 Sep 2016 19:16:22 +0300 Subject: IB/mlx4: Diagnostic HW counters are not supported in slave mode Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2aaabf7 ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 2af44c2de262..87ba9bca4181 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -2202,6 +2202,9 @@ static int mlx4_ib_alloc_diag_counters(struct mlx4_ib_dev *ibdev) bool per_port = !!(ibdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT); + if (mlx4_is_slave(ibdev->dev)) + return 0; + for (i = 0; i < MLX4_DIAG_COUNTERS_TYPES; i++) { /* i == 1 means we are building port counters */ if (i && !per_port) -- cgit v1.3-18-gd494 From 7fae6655a0c897875bd34501ec092232b526d3e4 Mon Sep 17 00:00:00 2001 From: Noa Osherovich Date: Mon, 12 Sep 2016 19:16:23 +0300 Subject: IB/mlx5: Enable MAD_IFC commands for IB ports only MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c809ef91 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 8150ea372c53..0480b643fb9c 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -288,7 +288,9 @@ __be16 mlx5_get_roce_udp_sport(struct mlx5_ib_dev *dev, u8 port_num, static int mlx5_use_mad_ifc(struct mlx5_ib_dev *dev) { - return !MLX5_CAP_GEN(dev->mdev, ib_virt); + if (MLX5_CAP_GEN(dev->mdev, port_type) == MLX5_CAP_PORT_TYPE_IB) + return !MLX5_CAP_GEN(dev->mdev, ib_virt); + return 0; } enum { -- cgit v1.3-18-gd494 From ee3da804ad1b1dd4c766199a6e8443542b0aaaef Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Mon, 12 Sep 2016 19:16:24 +0300 Subject: IB/mlx5: Set source mac address in FTE Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 0480b643fb9c..e19537cf44ab 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -1430,6 +1430,13 @@ static int parse_flow_attr(u32 *match_c, u32 *match_v, dmac_47_16), ib_spec->eth.val.dst_mac); + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, outer_headers_c, + smac_47_16), + ib_spec->eth.mask.src_mac); + ether_addr_copy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, outer_headers_v, + smac_47_16), + ib_spec->eth.val.src_mac); + if (ib_spec->eth.mask.vlan_tag) { MLX5_SET(fte_match_set_lyr_2_4, outer_headers_c, vlan_tag, 1); -- cgit v1.3-18-gd494 From dfdd6158ca2c8838313470c5ab79243d04da70b2 Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 7 Sep 2016 14:04:04 +0300 Subject: IB/rxe: Fix kernel panic in udp_setup_tunnel Disable creation of a UDP socket for ipv6 when CONFIG_IPV6 is not enabeld. Since udp_sock_create6() returns 0 when CONFIG_IPV6 is not set [ 46.888632] IP: [] setup_udp_tunnel_sock+0x6/0x4f [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 46.893918] Oops: 0002 [#1] PREEMPT [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1 [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000 [ 46.907854] EIP: 0060:[] EFLAGS: 00210246 CPU: 0 [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0 [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0 [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0 [ 46.924550] Stack: [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008 [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000 [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74 [ 46.942350] Call Trace: [ 46.944403] [] rxe_setup_udp_tunnel+0x8f/0x99 [ 46.947689] [] ? net_to_rxe+0x4e/0x4e [ 46.950567] [] rxe_net_init+0xe/0xa4 [ 46.953147] [] rxe_module_init+0x20/0x4c [ 46.955448] [] do_one_initcall+0x89/0x113 [ 46.957797] [] ? set_debug_rodata+0xf/0xf [ 46.959966] [] ? kernel_init_freeable+0xbe/0x15b [ 46.962262] [] kernel_init_freeable+0xde/0x15b [ 46.964418] [] kernel_init+0x8/0xd0 [ 46.966618] [] ret_from_kernel_thread+0xe/0x24 [ 46.969592] [] ? rest_init+0x6f/0x6f Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe.c | 25 +++++++++++++++-- drivers/infiniband/sw/rxe/rxe_net.c | 55 +++++++++++++++++-------------------- drivers/infiniband/sw/rxe/rxe_net.h | 5 +++- 3 files changed, 51 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c index 55f0e8f0ca79..ddd59270ff6d 100644 --- a/drivers/infiniband/sw/rxe/rxe.c +++ b/drivers/infiniband/sw/rxe/rxe.c @@ -362,15 +362,34 @@ static int __init rxe_module_init(void) return err; } - err = rxe_net_init(); + err = rxe_net_ipv4_init(); if (err) { - pr_err("rxe: unable to init\n"); + pr_err("rxe: unable to init ipv4 tunnel\n"); rxe_cache_exit(); - return err; + goto exit; + } + + err = rxe_net_ipv6_init(); + if (err) { + pr_err("rxe: unable to init ipv6 tunnel\n"); + rxe_cache_exit(); + goto exit; } + + err = register_netdevice_notifier(&rxe_net_notifier); + if (err) { + pr_err("rxe: Failed to rigister netdev notifier\n"); + goto exit; + } + pr_info("rxe: loaded\n"); return 0; + +exit: + rxe_release_udp_tunnel(recv_sockets.sk4); + rxe_release_udp_tunnel(recv_sockets.sk6); + return err; } static void __exit rxe_module_exit(void) diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c index 0b8d2ea8b41d..eedf2f1cafdf 100644 --- a/drivers/infiniband/sw/rxe/rxe_net.c +++ b/drivers/infiniband/sw/rxe/rxe_net.c @@ -275,9 +275,10 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port, return sock; } -static void rxe_release_udp_tunnel(struct socket *sk) +void rxe_release_udp_tunnel(struct socket *sk) { - udp_tunnel_sock_release(sk); + if (sk) + udp_tunnel_sock_release(sk); } static void prepare_udp_hdr(struct sk_buff *skb, __be16 src_port, @@ -658,51 +659,45 @@ out: return NOTIFY_OK; } -static struct notifier_block rxe_net_notifier = { +struct notifier_block rxe_net_notifier = { .notifier_call = rxe_notify, }; -int rxe_net_init(void) +int rxe_net_ipv4_init(void) { - int err; - spin_lock_init(&dev_list_lock); - recv_sockets.sk6 = rxe_setup_udp_tunnel(&init_net, - htons(ROCE_V2_UDP_DPORT), true); - if (IS_ERR(recv_sockets.sk6)) { - recv_sockets.sk6 = NULL; - pr_err("rxe: Failed to create IPv6 UDP tunnel\n"); - return -1; - } - recv_sockets.sk4 = rxe_setup_udp_tunnel(&init_net, - htons(ROCE_V2_UDP_DPORT), false); + htons(ROCE_V2_UDP_DPORT), false); if (IS_ERR(recv_sockets.sk4)) { - rxe_release_udp_tunnel(recv_sockets.sk6); recv_sockets.sk4 = NULL; - recv_sockets.sk6 = NULL; pr_err("rxe: Failed to create IPv4 UDP tunnel\n"); return -1; } - err = register_netdevice_notifier(&rxe_net_notifier); - if (err) { - rxe_release_udp_tunnel(recv_sockets.sk6); - rxe_release_udp_tunnel(recv_sockets.sk4); - pr_err("rxe: Failed to rigister netdev notifier\n"); - } - - return err; + return 0; } -void rxe_net_exit(void) +int rxe_net_ipv6_init(void) { - if (recv_sockets.sk6) - rxe_release_udp_tunnel(recv_sockets.sk6); +#if IS_ENABLED(CONFIG_IPV6) - if (recv_sockets.sk4) - rxe_release_udp_tunnel(recv_sockets.sk4); + spin_lock_init(&dev_list_lock); + recv_sockets.sk6 = rxe_setup_udp_tunnel(&init_net, + htons(ROCE_V2_UDP_DPORT), true); + if (IS_ERR(recv_sockets.sk6)) { + recv_sockets.sk6 = NULL; + pr_err("rxe: Failed to create IPv6 UDP tunnel\n"); + return -1; + } +#endif + return 0; +} + +void rxe_net_exit(void) +{ + rxe_release_udp_tunnel(recv_sockets.sk6); + rxe_release_udp_tunnel(recv_sockets.sk4); unregister_netdevice_notifier(&rxe_net_notifier); } diff --git a/drivers/infiniband/sw/rxe/rxe_net.h b/drivers/infiniband/sw/rxe/rxe_net.h index 7b06f76d16cc..0daf7f09e5b5 100644 --- a/drivers/infiniband/sw/rxe/rxe_net.h +++ b/drivers/infiniband/sw/rxe/rxe_net.h @@ -44,10 +44,13 @@ struct rxe_recv_sockets { }; extern struct rxe_recv_sockets recv_sockets; +extern struct notifier_block rxe_net_notifier; +void rxe_release_udp_tunnel(struct socket *sk); struct rxe_dev *rxe_net_add(struct net_device *ndev); -int rxe_net_init(void); +int rxe_net_ipv4_init(void); +int rxe_net_ipv6_init(void); void rxe_net_exit(void); #endif /* RXE_NET_H */ -- cgit v1.3-18-gd494 From 908948877bbbb240f67d7eb27d3a392beb394a07 Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 7 Sep 2016 14:04:05 +0300 Subject: IB/rxe: Fix duplicate atomic request handling When handling ack for atomic opcodes like "fetch&add" or "cmp&swp", the method send_atomic_ack() saves the ack before sending it, in case it gets lost and never reach the requester. In which case the method duplicate_request() will need to find it using the duplicated request.psn. But send_atomic_ack() used a wrong psn value and thus the above ack was never found. This fix uses the ack.psn to locate the ack in case its needed. This fix also copies the ack packet to the skb's control buffer since duplicate_request() will need it when calling rxe_xmit_packet() Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_resp.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe_resp.c b/drivers/infiniband/sw/rxe/rxe_resp.c index ebb03b46e2ad..3e0f0f2baace 100644 --- a/drivers/infiniband/sw/rxe/rxe_resp.c +++ b/drivers/infiniband/sw/rxe/rxe_resp.c @@ -972,11 +972,13 @@ static int send_atomic_ack(struct rxe_qp *qp, struct rxe_pkt_info *pkt, free_rd_atomic_resource(qp, res); rxe_advance_resp_resource(qp); + memcpy(SKB_TO_PKT(skb), &ack_pkt, sizeof(skb->cb)); + res->type = RXE_ATOMIC_MASK; res->atomic.skb = skb; - res->first_psn = qp->resp.psn; - res->last_psn = qp->resp.psn; - res->cur_psn = qp->resp.psn; + res->first_psn = ack_pkt.psn; + res->last_psn = ack_pkt.psn; + res->cur_psn = ack_pkt.psn; rc = rxe_xmit_packet(rxe, qp, &ack_pkt, skb_copy); if (rc) { @@ -1116,8 +1118,7 @@ static enum resp_states duplicate_request(struct rxe_qp *qp, rc = RESPST_CLEANUP; goto out; } - bth_set_psn(SKB_TO_PKT(skb_copy), - qp->resp.psn - 1); + /* Resend the result. */ rc = rxe_xmit_packet(to_rdev(qp->ibqp.device), qp, pkt, skb_copy); -- cgit v1.3-18-gd494 From 3050b99850247695cb07a5c15265afcc08bcf400 Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 7 Sep 2016 14:04:06 +0300 Subject: IB/rxe: Fix race condition between requester and completer rxe_requester() is sending a pkt with rxe_xmit_packet() and then calls rxe_update() to update the wqe and qp's psn values. But sometimes the response is received before the requester had time to update the wqe in which case the completer acts on errornous wqe values. This fix updates the wqe and qp before actually sending the request and rolls back when xmit fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_req.c | 57 ++++++++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c index 33b2d9d77021..13a848a518e8 100644 --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -511,24 +511,21 @@ static int fill_packet(struct rxe_qp *qp, struct rxe_send_wqe *wqe, } static void update_wqe_state(struct rxe_qp *qp, - struct rxe_send_wqe *wqe, - struct rxe_pkt_info *pkt, - enum wqe_state *prev_state) + struct rxe_send_wqe *wqe, + struct rxe_pkt_info *pkt) { - enum wqe_state prev_state_ = wqe->state; - if (pkt->mask & RXE_END_MASK) { if (qp_type(qp) == IB_QPT_RC) wqe->state = wqe_state_pending; } else { wqe->state = wqe_state_processing; } - - *prev_state = prev_state_; } -static void update_state(struct rxe_qp *qp, struct rxe_send_wqe *wqe, - struct rxe_pkt_info *pkt, int payload) +static void update_wqe_psn(struct rxe_qp *qp, + struct rxe_send_wqe *wqe, + struct rxe_pkt_info *pkt, + int payload) { /* number of packets left to send including current one */ int num_pkt = (wqe->dma.resid + payload + qp->mtu - 1) / qp->mtu; @@ -546,9 +543,34 @@ static void update_state(struct rxe_qp *qp, struct rxe_send_wqe *wqe, qp->req.psn = (wqe->first_psn + num_pkt) & BTH_PSN_MASK; else qp->req.psn = (qp->req.psn + 1) & BTH_PSN_MASK; +} - qp->req.opcode = pkt->opcode; +static void save_state(struct rxe_send_wqe *wqe, + struct rxe_qp *qp, + struct rxe_send_wqe *rollback_wqe, + struct rxe_qp *rollback_qp) +{ + rollback_wqe->state = wqe->state; + rollback_wqe->first_psn = wqe->first_psn; + rollback_wqe->last_psn = wqe->last_psn; + rollback_qp->req.psn = qp->req.psn; +} +static void rollback_state(struct rxe_send_wqe *wqe, + struct rxe_qp *qp, + struct rxe_send_wqe *rollback_wqe, + struct rxe_qp *rollback_qp) +{ + wqe->state = rollback_wqe->state; + wqe->first_psn = rollback_wqe->first_psn; + wqe->last_psn = rollback_wqe->last_psn; + qp->req.psn = rollback_qp->req.psn; +} + +static void update_state(struct rxe_qp *qp, struct rxe_send_wqe *wqe, + struct rxe_pkt_info *pkt, int payload) +{ + qp->req.opcode = pkt->opcode; if (pkt->mask & RXE_END_MASK) qp->req.wqe_index = next_index(qp->sq.queue, qp->req.wqe_index); @@ -571,7 +593,8 @@ int rxe_requester(void *arg) int mtu; int opcode; int ret; - enum wqe_state prev_state; + struct rxe_qp rollback_qp; + struct rxe_send_wqe rollback_wqe; next_wqe: if (unlikely(!qp->valid || qp->req.state == QP_STATE_ERROR)) @@ -688,13 +711,21 @@ next_wqe: goto err; } - update_wqe_state(qp, wqe, &pkt, &prev_state); + /* + * To prevent a race on wqe access between requester and completer, + * wqe members state and psn need to be set before calling + * rxe_xmit_packet(). + * Otherwise, completer might initiate an unjustified retry flow. + */ + save_state(wqe, qp, &rollback_wqe, &rollback_qp); + update_wqe_state(qp, wqe, &pkt); + update_wqe_psn(qp, wqe, &pkt, payload); ret = rxe_xmit_packet(to_rdev(qp->ibqp.device), qp, &pkt, skb); if (ret) { qp->need_req_skb = 1; kfree_skb(skb); - wqe->state = prev_state; + rollback_state(wqe, qp, &rollback_wqe, &rollback_qp); if (ret == -EAGAIN) { rxe_run_task(&qp->req.task, 1); -- cgit v1.3-18-gd494 From c1cc72cb6ff95cbe02ed747866576dccab4a5911 Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 7 Sep 2016 14:04:07 +0300 Subject: IB/rxe: Fix kmem_cache leak Decrement qp reference when handling error path in completer to prevent kmem_cache leak. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_comp.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c index 36f67de44095..1c59ef2c67aa 100644 --- a/drivers/infiniband/sw/rxe/rxe_comp.c +++ b/drivers/infiniband/sw/rxe/rxe_comp.c @@ -689,7 +689,14 @@ int rxe_completer(void *arg) qp->req.need_retry = 1; rxe_run_task(&qp->req.task, 1); } + + if (pkt) { + rxe_drop_ref(pkt->qp); + kfree_skb(skb); + } + goto exit; + } else { wqe->status = IB_WC_RETRY_EXC_ERR; state = COMPST_ERROR; @@ -716,6 +723,12 @@ int rxe_completer(void *arg) case COMPST_ERROR: do_complete(qp, wqe); rxe_qp_error(qp); + + if (pkt) { + rxe_drop_ref(pkt->qp); + kfree_skb(skb); + } + goto exit; } } -- cgit v1.3-18-gd494 From e4618d40eb3dc1a6d1f55f7150ea25bb23ab410a Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 9 Sep 2016 08:15:37 +0100 Subject: IB/rdmavt: Don't vfree a kzalloc'ed memory region The userspace memory region 'mr' is allocated with kzalloc in __rvt_alloc_mr however it is incorrectly being freed with vfree in __rvt_free_mr. Fix this by using kfree to free it. Signed-off-by: Colin Ian King Reviewed-by: Leon Romanovsky Acked-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rdmavt/mr.c b/drivers/infiniband/sw/rdmavt/mr.c index 80c4b6b401b8..46b64970058e 100644 --- a/drivers/infiniband/sw/rdmavt/mr.c +++ b/drivers/infiniband/sw/rdmavt/mr.c @@ -294,7 +294,7 @@ static void __rvt_free_mr(struct rvt_mr *mr) { rvt_deinit_mregion(&mr->mr); rvt_free_lkey(&mr->mr); - vfree(mr); + kfree(mr); } /** -- cgit v1.3-18-gd494 From cce94483e47e8e3d74cf4475dea33f9fd4b6ad9f Mon Sep 17 00:00:00 2001 From: Filipe Manco Date: Thu, 15 Sep 2016 17:10:46 +0200 Subject: xen-netback: fix error handling on netback_probe() In case of error during netback_probe() (e.g. an entry missing on the xenstore) netback_remove() is called on the new device, which will set the device backend state to XenbusStateClosed by calling set_backend_state(). However, the backend state wasn't initialized by netback_probe() at this point, which will cause and invalid transaction and set_backend_state() to BUG(). Initialize the backend state at the beginning of netback_probe() to XenbusStateInitialising, and create two new valid state transitions on set_backend_state(), from XenbusStateInitialising to XenbusStateClosed, and from XenbusStateInitialising to XenbusStateInitWait. Signed-off-by: Filipe Manco Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/xenbus.c | 46 ++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c index 6a31f2610c23..daf4c7867102 100644 --- a/drivers/net/xen-netback/xenbus.c +++ b/drivers/net/xen-netback/xenbus.c @@ -271,6 +271,11 @@ static int netback_probe(struct xenbus_device *dev, be->dev = dev; dev_set_drvdata(&dev->dev, be); + be->state = XenbusStateInitialising; + err = xenbus_switch_state(dev, XenbusStateInitialising); + if (err) + goto fail; + sg = 1; do { @@ -383,11 +388,6 @@ static int netback_probe(struct xenbus_device *dev, be->hotplug_script = script; - err = xenbus_switch_state(dev, XenbusStateInitWait); - if (err) - goto fail; - - be->state = XenbusStateInitWait; /* This kicks hotplug scripts, so do it immediately. */ err = backend_create_xenvif(be); @@ -492,20 +492,20 @@ static inline void backend_switch_state(struct backend_info *be, /* Handle backend state transitions: * - * The backend state starts in InitWait and the following transitions are + * The backend state starts in Initialising and the following transitions are * allowed. * - * InitWait -> Connected - * - * ^ \ | - * | \ | - * | \ | - * | \ | - * | \ | - * | \ | - * | V V + * Initialising -> InitWait -> Connected + * \ + * \ ^ \ | + * \ | \ | + * \ | \ | + * \ | \ | + * \ | \ | + * \ | \ | + * V | V V * - * Closed <-> Closing + * Closed <-> Closing * * The state argument specifies the eventual state of the backend and the * function transitions to that state via the shortest path. @@ -515,6 +515,20 @@ static void set_backend_state(struct backend_info *be, { while (be->state != state) { switch (be->state) { + case XenbusStateInitialising: + switch (state) { + case XenbusStateInitWait: + case XenbusStateConnected: + case XenbusStateClosing: + backend_switch_state(be, XenbusStateInitWait); + break; + case XenbusStateClosed: + backend_switch_state(be, XenbusStateClosed); + break; + default: + BUG(); + } + break; case XenbusStateClosed: switch (state) { case XenbusStateInitWait: -- cgit v1.3-18-gd494 From 2835d2d9e366a2985b24051d228333bfba82f3a7 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:51 +0200 Subject: bna: add missing per queue ethtool stat Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 0e4fdc3dd729..5671353fc7bc 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -31,7 +31,7 @@ #define BNAD_NUM_TXF_COUNTERS 12 #define BNAD_NUM_RXF_COUNTERS 10 #define BNAD_NUM_CQ_COUNTERS (3 + 5) -#define BNAD_NUM_RXQ_COUNTERS 6 +#define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 #define BNAD_ETHTOOL_STATS_NUM \ @@ -658,6 +658,8 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_consumer_index", q_num); @@ -678,6 +680,9 @@ bnad_get_strings(struct net_device *netdev, u32 stringset, u8 *string) sprintf(string, "rxq%d_allocbuf_failed", q_num); string += ETH_GSTRING_LEN; + sprintf(string, "rxq%d_mapbuf_failed", + q_num); + string += ETH_GSTRING_LEN; sprintf(string, "rxq%d_producer_index", q_num); string += ETH_GSTRING_LEN; -- cgit v1.3-18-gd494 From 37dd348270c1a48f0234354a06c0ce052b6c85b1 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Thu, 15 Sep 2016 22:47:52 +0200 Subject: bna: fix crash in bnad_get_strings() Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna driver foolishly depends on the structure. It uses part of it for ethtool statistics and it's not bad but the driver assumes its size is constant as it defines string for each existing entry. The problem occurs when the structure is extended because you need to modify bna driver as well. If not any attempt to retrieve ethtool statistics results in crash in bnad_get_strings(). The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of strings in the array and also removes rtnl_link_stats64 entries that are not used in output and are always zero. Fixes: 6e7333d "net: add rx_nohandler stat counter" Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 50 ++++++++++++------------- 1 file changed, 23 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 5671353fc7bc..31f61a744d66 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -34,12 +34,7 @@ #define BNAD_NUM_RXQ_COUNTERS 7 #define BNAD_NUM_TXQ_COUNTERS 5 -#define BNAD_ETHTOOL_STATS_NUM \ - (sizeof(struct rtnl_link_stats64) / sizeof(u64) + \ - sizeof(struct bnad_drv_stats) / sizeof(u64) + \ - offsetof(struct bfi_enet_stats, rxf_stats[0]) / sizeof(u64)) - -static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { +static const char *bnad_net_stats_strings[] = { "rx_packets", "tx_packets", "rx_bytes", @@ -50,22 +45,10 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "tx_dropped", "multicast", "collisions", - "rx_length_errors", - "rx_over_errors", "rx_crc_errors", "rx_frame_errors", - "rx_fifo_errors", - "rx_missed_errors", - - "tx_aborted_errors", - "tx_carrier_errors", "tx_fifo_errors", - "tx_heartbeat_errors", - "tx_window_errors", - - "rx_compressed", - "tx_compressed", "netif_queue_stop", "netif_queue_wakeup", @@ -254,6 +237,8 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "fc_tx_fid_parity_errors", }; +#define BNAD_ETHTOOL_STATS_NUM ARRAY_SIZE(bnad_net_stats_strings) + static int bnad_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) { @@ -859,9 +844,9 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, u64 *buf) { struct bnad *bnad = netdev_priv(netdev); - int i, j, bi; + int i, j, bi = 0; unsigned long flags; - struct rtnl_link_stats64 *net_stats64; + struct rtnl_link_stats64 net_stats64; u64 *stats64; u32 bmap; @@ -876,14 +861,25 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, * under the same lock */ spin_lock_irqsave(&bnad->bna_lock, flags); - bi = 0; - memset(buf, 0, stats->n_stats * sizeof(u64)); - - net_stats64 = (struct rtnl_link_stats64 *)buf; - bnad_netdev_qstats_fill(bnad, net_stats64); - bnad_netdev_hwstats_fill(bnad, net_stats64); - bi = sizeof(*net_stats64) / sizeof(u64); + memset(&net_stats64, 0, sizeof(net_stats64)); + bnad_netdev_qstats_fill(bnad, &net_stats64); + bnad_netdev_hwstats_fill(bnad, &net_stats64); + + buf[bi++] = net_stats64.rx_packets; + buf[bi++] = net_stats64.tx_packets; + buf[bi++] = net_stats64.rx_bytes; + buf[bi++] = net_stats64.tx_bytes; + buf[bi++] = net_stats64.rx_errors; + buf[bi++] = net_stats64.tx_errors; + buf[bi++] = net_stats64.rx_dropped; + buf[bi++] = net_stats64.tx_dropped; + buf[bi++] = net_stats64.multicast; + buf[bi++] = net_stats64.collisions; + buf[bi++] = net_stats64.rx_length_errors; + buf[bi++] = net_stats64.rx_crc_errors; + buf[bi++] = net_stats64.rx_frame_errors; + buf[bi++] = net_stats64.tx_fifo_errors; /* Get netif_queue_stopped from stack */ bnad->stats.drv_stats.netif_queue_stopped = netif_queue_stopped(netdev); -- cgit v1.3-18-gd494 From 6244bd651236d86f59387d43c531b5f942a92b38 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 8 Aug 2016 17:48:20 -0600 Subject: exynos-drm: Fix unsupported GEM memory type error message to be clear Fix unsupported GEM memory type error message to include the memory type information. Signed-off-by: Shuah Khan Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index e0166403b4bd..40ce841eb952 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -55,11 +55,11 @@ static int check_fb_gem_memory_type(struct drm_device *drm_dev, flags = exynos_gem->flags; /* - * without iommu support, not support physically non-continuous memory - * for framebuffer. + * Physically non-contiguous memory type for framebuffer is not + * supported without IOMMU. */ if (IS_NONCONTIG_BUFFER(flags)) { - DRM_ERROR("cannot use this gem memory type for fb.\n"); + DRM_ERROR("Non-contiguous GEM memory is not supported.\n"); return -EINVAL; } -- cgit v1.3-18-gd494 From 479f12545460809cfc9093d90d6ed82d76388e97 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 31 Aug 2016 14:55:54 +0200 Subject: drm/exynos: fimc: fix system and runtime pm integration Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 29 ++--------------------------- 1 file changed, 2 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 0525c56145db..147ef0d298cb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1753,32 +1753,6 @@ static int fimc_clk_ctrl(struct fimc_context *ctx, bool enable) return 0; } -#ifdef CONFIG_PM_SLEEP -static int fimc_suspend(struct device *dev) -{ - struct fimc_context *ctx = get_fimc_context(dev); - - DRM_DEBUG_KMS("id[%d]\n", ctx->id); - - if (pm_runtime_suspended(dev)) - return 0; - - return fimc_clk_ctrl(ctx, false); -} - -static int fimc_resume(struct device *dev) -{ - struct fimc_context *ctx = get_fimc_context(dev); - - DRM_DEBUG_KMS("id[%d]\n", ctx->id); - - if (!pm_runtime_suspended(dev)) - return fimc_clk_ctrl(ctx, true); - - return 0; -} -#endif - static int fimc_runtime_suspend(struct device *dev) { struct fimc_context *ctx = get_fimc_context(dev); @@ -1799,7 +1773,8 @@ static int fimc_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops fimc_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(fimc_suspend, fimc_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) SET_RUNTIME_PM_OPS(fimc_runtime_suspend, fimc_runtime_resume, NULL) }; -- cgit v1.3-18-gd494 From 83bd7b20aaf499030bf857ef64de3c19309b107d Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 31 Aug 2016 14:55:55 +0200 Subject: drm/exynos: gsc: fix system and runtime pm integration Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 29 ++--------------------------- 1 file changed, 2 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 5d20da8f957e..b1894aa9286e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1760,32 +1760,6 @@ static int gsc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int gsc_suspend(struct device *dev) -{ - struct gsc_context *ctx = get_gsc_context(dev); - - DRM_DEBUG_KMS("id[%d]\n", ctx->id); - - if (pm_runtime_suspended(dev)) - return 0; - - return gsc_clk_ctrl(ctx, false); -} - -static int gsc_resume(struct device *dev) -{ - struct gsc_context *ctx = get_gsc_context(dev); - - DRM_DEBUG_KMS("id[%d]\n", ctx->id); - - if (!pm_runtime_suspended(dev)) - return gsc_clk_ctrl(ctx, true); - - return 0; -} -#endif - #ifdef CONFIG_PM static int gsc_runtime_suspend(struct device *dev) { @@ -1807,7 +1781,8 @@ static int gsc_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops gsc_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(gsc_suspend, gsc_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) SET_RUNTIME_PM_OPS(gsc_runtime_suspend, gsc_runtime_resume, NULL) }; -- cgit v1.3-18-gd494 From 5b67723e6096f5470f361656cd108430d3b12c67 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 31 Aug 2016 14:55:56 +0200 Subject: drm/exynos: rotator: fix system and runtime pm integration Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 26 ++------------------------ 1 file changed, 2 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 404367a430b5..6591e406084c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -794,29 +794,6 @@ static int rotator_clk_crtl(struct rot_context *rot, bool enable) return 0; } - -#ifdef CONFIG_PM_SLEEP -static int rotator_suspend(struct device *dev) -{ - struct rot_context *rot = dev_get_drvdata(dev); - - if (pm_runtime_suspended(dev)) - return 0; - - return rotator_clk_crtl(rot, false); -} - -static int rotator_resume(struct device *dev) -{ - struct rot_context *rot = dev_get_drvdata(dev); - - if (!pm_runtime_suspended(dev)) - return rotator_clk_crtl(rot, true); - - return 0; -} -#endif - static int rotator_runtime_suspend(struct device *dev) { struct rot_context *rot = dev_get_drvdata(dev); @@ -833,7 +810,8 @@ static int rotator_runtime_resume(struct device *dev) #endif static const struct dev_pm_ops rotator_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(rotator_suspend, rotator_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) SET_RUNTIME_PM_OPS(rotator_runtime_suspend, rotator_runtime_resume, NULL) }; -- cgit v1.3-18-gd494 From b05984e21a7e000bf5074ace00d7a574944b2c16 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 31 Aug 2016 14:55:57 +0200 Subject: drm/exynos: g2d: fix system and runtime pm integration Move code from system sleep pm to runtime pm callbacks to ensure proper driver state preservation when device is under power domain. Then, use generic helpers for using runtime pm for system sleep pm. Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 4bf00f57ffe8..6eca8bb88648 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1475,8 +1475,8 @@ static int g2d_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int g2d_suspend(struct device *dev) +#ifdef CONFIG_PM +static int g2d_runtime_suspend(struct device *dev) { struct g2d_data *g2d = dev_get_drvdata(dev); @@ -1490,25 +1490,6 @@ static int g2d_suspend(struct device *dev) flush_work(&g2d->runqueue_work); - return 0; -} - -static int g2d_resume(struct device *dev) -{ - struct g2d_data *g2d = dev_get_drvdata(dev); - - g2d->suspended = false; - g2d_exec_runqueue(g2d); - - return 0; -} -#endif - -#ifdef CONFIG_PM -static int g2d_runtime_suspend(struct device *dev) -{ - struct g2d_data *g2d = dev_get_drvdata(dev); - clk_disable_unprepare(g2d->gate_clk); return 0; @@ -1523,12 +1504,16 @@ static int g2d_runtime_resume(struct device *dev) if (ret < 0) dev_warn(dev, "failed to enable clock.\n"); + g2d->suspended = false; + g2d_exec_runqueue(g2d); + return ret; } #endif static const struct dev_pm_ops g2d_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL) }; -- cgit v1.3-18-gd494 From 4158dbe1be9b420e1fdd9ec5c033647a605ca485 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sun, 18 Sep 2016 22:51:38 +0900 Subject: Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning When CONFIG_PM is not set, we get a warning about an unused function: drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function] static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable) ^~~~~~~~~~~~ This removes the two #ifdef checks in this file and instead marks the functions as __maybe_unused, which is a more reliable way of doing the same, allowing better build coverage and avoiding the warning above. Signed-off-by: Arnd Bergmann Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index b1894aa9286e..52a9d269484e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1760,8 +1760,7 @@ static int gsc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int gsc_runtime_suspend(struct device *dev) +static int __maybe_unused gsc_runtime_suspend(struct device *dev) { struct gsc_context *ctx = get_gsc_context(dev); @@ -1770,7 +1769,7 @@ static int gsc_runtime_suspend(struct device *dev) return gsc_clk_ctrl(ctx, false); } -static int gsc_runtime_resume(struct device *dev) +static int __maybe_unused gsc_runtime_resume(struct device *dev) { struct gsc_context *ctx = get_gsc_context(dev); @@ -1778,7 +1777,6 @@ static int gsc_runtime_resume(struct device *dev) return gsc_clk_ctrl(ctx, true); } -#endif static const struct dev_pm_ops gsc_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, -- cgit v1.3-18-gd494 From 19cd120319ef5390404a5d9c829c3a7962f184a8 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Fri, 16 Sep 2016 10:50:13 +0200 Subject: stmmac: fix PWRDWN into the PMT register for global unicast. MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA Signed-off-by: Giuseppe Cavallaro Cc: Alexandre TORGUE Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index cbefe9e2207c..885a5e64519d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -261,7 +261,7 @@ static void dwmac1000_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index df5580dcdfed..51019b794be5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -102,7 +102,7 @@ static void dwmac4_pmt(struct mac_device_info *hw, unsigned long mode) } if (mode & WAKE_UCAST) { pr_debug("GMAC: WOL on global unicast\n"); - pmt |= global_unicast; + pmt |= power_down | global_unicast | wake_up_frame_en; } writel(pmt, ioaddr + GMAC_PMT); -- cgit v1.3-18-gd494 From 47a66e45d7a7613322549c2475ea9d809baaf514 Mon Sep 17 00:00:00 2001 From: "Kristian H. Kristensen" Date: Tue, 13 Sep 2016 14:20:45 -0700 Subject: drm: Only use compat ioctl for addfb2 on X86/IA64 Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by: Rob Clark Signed-off-by: Kristian H. Kristensen [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by: Sean Paul Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_ioc32.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 57676f8d7ecf..a6289752be16 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -1015,6 +1015,7 @@ static int compat_drm_wait_vblank(struct file *file, unsigned int cmd, return 0; } +#if defined(CONFIG_X86) || defined(CONFIG_IA64) typedef struct drm_mode_fb_cmd232 { u32 fb_id; u32 width; @@ -1071,6 +1072,7 @@ static int compat_drm_mode_addfb2(struct file *file, unsigned int cmd, return 0; } +#endif static drm_ioctl_compat_t *drm_compat_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_VERSION32)] = compat_drm_version, @@ -1104,7 +1106,9 @@ static drm_ioctl_compat_t *drm_compat_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw, #endif [DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank, +#if defined(CONFIG_X86) || defined(CONFIG_IA64) [DRM_IOCTL_NR(DRM_IOCTL_MODE_ADDFB232)] = compat_drm_mode_addfb2, +#endif }; /** -- cgit v1.3-18-gd494 From 7a353289925f01cb188ebc6fc4f4a33456b7de44 Mon Sep 17 00:00:00 2001 From: RogerCC Lin Date: Mon, 19 Sep 2016 10:53:25 +0800 Subject: mtd: nand: fix generating over-boundary ECC data when writing When mtk_ecc_encode() is writing the ECC parity data to the OOB region,because each register is 4 bytes in length,but the len's unit is in bytes,the operation in the for loop will cross the ECC's boundary. Signed-off-by: RogerCC Lin Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_ecc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index 25a4fbd4d24a..d54f666417e1 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -366,7 +366,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, u8 *data, u32 bytes) { dma_addr_t addr; - u32 *p, len, i; + u8 *p; + u32 len, i, val; int ret = 0; addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE); @@ -392,11 +393,14 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */ len = (config->strength * ECC_PARITY_BITS + 7) >> 3; - p = (u32 *)(data + bytes); + p = data + bytes; /* write the parity bytes generated by the ECC back to the OOB region */ - for (i = 0; i < len; i++) - p[i] = readl(ecc->regs + ECC_ENCPAR(i)); + for (i = 0; i < len; i++) { + if ((i % 4) == 0) + val = readl(ecc->regs + ECC_ENCPAR(i / 4)); + p[i] = (val >> ((i % 4) * 8)) & 0xff; + } timeout: dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE); -- cgit v1.3-18-gd494 From 559e58e7ed2dadc310f174e609ead8a3e8acfc4e Mon Sep 17 00:00:00 2001 From: RogerCC Lin Date: Mon, 19 Sep 2016 10:53:26 +0800 Subject: mtd: nand: fix chances to create incomplete ECC data when writing When mtk_nfc_do_write_page() comparing the sector number,because the sector number field is at the 12th-bit position of NFI_BYTELEN register,the masked register should be shifted 12 bits before being compared.The result of this bug may cause the second subpage has incomplete ECC parity bytes. Signed-off-by: RogerCC Lin Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_nand.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c index ddaa2acb9dd7..5223a2182ee4 100644 --- a/drivers/mtd/nand/mtk_nand.c +++ b/drivers/mtd/nand/mtk_nand.c @@ -93,6 +93,9 @@ #define NFI_FSM_MASK (0xf << 16) #define NFI_ADDRCNTR (0x70) #define CNTR_MASK GENMASK(16, 12) +#define ADDRCNTR_SEC_SHIFT (12) +#define ADDRCNTR_SEC(val) \ + (((val) & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT) #define NFI_STRADDR (0x80) #define NFI_BYTELEN (0x84) #define NFI_CSEL (0x90) @@ -699,7 +702,7 @@ static int mtk_nfc_do_write_page(struct mtd_info *mtd, struct nand_chip *chip, } ret = readl_poll_timeout_atomic(nfc->regs + NFI_ADDRCNTR, reg, - (reg & CNTR_MASK) >= chip->ecc.steps, + ADDRCNTR_SEC(reg) >= chip->ecc.steps, 10, MTK_TIMEOUT); if (ret) dev_err(dev, "hwecc write timeout\n"); @@ -902,7 +905,7 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, dev_warn(nfc->dev, "read ahb/dma done timeout\n"); rc = readl_poll_timeout_atomic(nfc->regs + NFI_BYTELEN, reg, - (reg & CNTR_MASK) >= sectors, 10, + ADDRCNTR_SEC(reg) >= sectors, 10, MTK_TIMEOUT); if (rc < 0) { dev_err(nfc->dev, "subpage done timeout\n"); -- cgit v1.3-18-gd494 From 38178e7b88dcbe1ab384f27a7370074e774dda81 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Mon, 19 Sep 2016 11:09:40 +0200 Subject: mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a regression accessing the OOB area from the mxc_nand driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free() functions. They report a bogus oobregion { 64, 7 } which leads to errors accessing bogus data when reading the oob area. Prior to the commit the mtd-oobtest module could be run without any errors. With the offending commit, this test fails with results like: |Running mtd-oobtest | |================================================= |mtd_oobtest: MTD device: 5 |mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64 |mtd_test: scanning for bad eraseblocks |mtd_test: scanned 4 eraseblocks, 0 are bad |mtd_oobtest: test 1 of 5 |mtd_oobtest: writing OOBs of whole device |mtd_oobtest: written up to eraseblock 0 |mtd_oobtest: written 4 eraseblocks |mtd_oobtest: verifying all eraseblocks |mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2 |mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc |mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65 |mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2 |mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c |mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d |mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92 |mtd_oobtest: error: verify failed at 0x0 [...] Signed-off-by: Lothar Waßmann Fixes: a894cf6c5a82 ("mtd: nand: mxc: switch to mtd_ooblayout_ops") Cc: Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 5173fadc9a4e..57cbe2b83849 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -943,7 +943,7 @@ static int mxc_v2_ooblayout_free(struct mtd_info *mtd, int section, struct nand_chip *nand_chip = mtd_to_nand(mtd); int stepsize = nand_chip->ecc.bytes == 9 ? 16 : 26; - if (section > nand_chip->ecc.steps) + if (section >= nand_chip->ecc.steps) return -ERANGE; if (!section) { -- cgit v1.3-18-gd494 From 4de349e786a3a2d51bd02d56f3de151bbc3c3df9 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 17 Aug 2016 12:41:08 -0300 Subject: can: flexcan: fix resume function On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 41c0fc9f3b14..16f7cadda5c3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1268,11 +1268,10 @@ static int __maybe_unused flexcan_suspend(struct device *device) struct flexcan_priv *priv = netdev_priv(dev); int err; - err = flexcan_chip_disable(priv); - if (err) - return err; - if (netif_running(dev)) { + err = flexcan_chip_disable(priv); + if (err) + return err; netif_stop_queue(dev); netif_device_detach(dev); } @@ -1285,13 +1284,17 @@ static int __maybe_unused flexcan_resume(struct device *device) { struct net_device *dev = dev_get_drvdata(device); struct flexcan_priv *priv = netdev_priv(dev); + int err; priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(dev)) { netif_device_attach(dev); netif_start_queue(dev); + err = flexcan_chip_enable(priv); + if (err) + return err; } - return flexcan_chip_enable(priv); + return 0; } static SIMPLE_DEV_PM_OPS(flexcan_pm_ops, flexcan_suspend, flexcan_resume); -- cgit v1.3-18-gd494 From d8feef9bd447381952a33e6284241006f394c080 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 18 Sep 2016 11:24:50 -0300 Subject: [media] cx23885/saa7134: assign q->dev to the PCI device Fix a regression caused by commit 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Three places where q->dev should be set were missed, causing a WARN. Fixes: 2bc46b3ad3c1 ("[media] media/pci: convert drivers to use the new vb2_queue dev field"). Signed-off-by: Hans Verkuil Reported-by: Marton Balint Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/cx23885-417.c | 1 + drivers/media/pci/saa7134/saa7134-dvb.c | 1 + drivers/media/pci/saa7134/saa7134-empress.c | 1 + 3 files changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c index efec2d1a7afd..4d080da7afaf 100644 --- a/drivers/media/pci/cx23885/cx23885-417.c +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -1552,6 +1552,7 @@ int cx23885_417_register(struct cx23885_dev *dev) q->mem_ops = &vb2_dma_sg_memops; q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->lock = &dev->lock; + q->dev = &dev->pci->dev; err = vb2_queue_init(q); if (err < 0) diff --git a/drivers/media/pci/saa7134/saa7134-dvb.c b/drivers/media/pci/saa7134/saa7134-dvb.c index db987e5b93eb..59a4b5f7724e 100644 --- a/drivers/media/pci/saa7134/saa7134-dvb.c +++ b/drivers/media/pci/saa7134/saa7134-dvb.c @@ -1238,6 +1238,7 @@ static int dvb_init(struct saa7134_dev *dev) q->buf_struct_size = sizeof(struct saa7134_buf); q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->lock = &dev->lock; + q->dev = &dev->pci->dev; ret = vb2_queue_init(q); if (ret) { vb2_dvb_dealloc_frontends(&dev->frontends); diff --git a/drivers/media/pci/saa7134/saa7134-empress.c b/drivers/media/pci/saa7134/saa7134-empress.c index ca417a454d67..791a5161809b 100644 --- a/drivers/media/pci/saa7134/saa7134-empress.c +++ b/drivers/media/pci/saa7134/saa7134-empress.c @@ -295,6 +295,7 @@ static int empress_init(struct saa7134_dev *dev) q->buf_struct_size = sizeof(struct saa7134_buf); q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; q->lock = &dev->lock; + q->dev = &dev->pci->dev; err = vb2_queue_init(q); if (err) return err; -- cgit v1.3-18-gd494 From b92ae139c308c5223521ed6ec022148b81312809 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Mon, 19 Sep 2016 14:44:47 -0700 Subject: rapidio/rio_cm: avoid GFP_KERNEL in atomic context As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737): riocm_send_close() is called from rio_cm_shutdown() under spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL allocation. Fix by taking riocm_send_close() outside of spinlock protected code. [akpm@linux-foundation.org: remove unneeded `if (!list_empty())'] Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Reported-by: Alexey Khoroshilov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio_cm.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c index 3fa17ac8df54..cebc296463ad 100644 --- a/drivers/rapidio/rio_cm.c +++ b/drivers/rapidio/rio_cm.c @@ -2247,17 +2247,30 @@ static int rio_cm_shutdown(struct notifier_block *nb, unsigned long code, { struct rio_channel *ch; unsigned int i; + LIST_HEAD(list); riocm_debug(EXIT, "."); + /* + * If there are any channels left in connected state send + * close notification to the connection partner. + * First build a list of channels that require a closing + * notification because function riocm_send_close() should + * be called outside of spinlock protected code. + */ spin_lock_bh(&idr_lock); idr_for_each_entry(&ch_idr, ch, i) { - riocm_debug(EXIT, "close ch %d", ch->id); - if (ch->state == RIO_CM_CONNECTED) - riocm_send_close(ch); + if (ch->state == RIO_CM_CONNECTED) { + riocm_debug(EXIT, "close ch %d", ch->id); + idr_remove(&ch_idr, ch->id); + list_add(&ch->ch_node, &list); + } } spin_unlock_bh(&idr_lock); + list_for_each_entry(ch, &list, ch_node) + riocm_send_close(ch); + return NOTIFY_DONE; } -- cgit v1.3-18-gd494 From 727653d6ce7103b245eb8041f55dd5885f4c3289 Mon Sep 17 00:00:00 2001 From: James Morse Date: Mon, 19 Sep 2016 18:29:15 +0100 Subject: irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls gic_compute_target_list() which advances the iterator by the number of CPUs in the cluster. If gic_compute_target_list() reaches the last CPU it leaves the iterator pointing at the last CPU. This means the next time round the for_each_cpu() loop cpumask_next() will be called with an invalid CPU. This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS: [ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000 [ 3.077943] CPU1: Booted secondary processor [410fd0f0] [ 3.078542] ------------[ cut here ]------------ [ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170 [ 3.078812] Modules linked in: [ 3.078869] [ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188 [ 3.078994] Hardware name: Foundation-v8A (DT) [ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000 [ 3.079145] PC is at gic_raise_softirq+0x12c/0x170 [ 3.079226] LR is at gic_raise_softirq+0xa4/0x170 [ 3.079296] pc : [] lr : [] pstate: 200001c9 [ 3.081139] Call trace: [ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10) [ 3.082269] [] gic_raise_softirq+0x12c/0x170 [ 3.082354] [] smp_send_reschedule+0x34/0x40 [ 3.082433] [] resched_curr+0x50/0x88 [ 3.082512] [] check_preempt_curr+0x60/0xd0 [ 3.082593] [] ttwu_do_wakeup+0x20/0xe8 [ 3.082672] [] ttwu_do_activate+0x90/0xc0 [ 3.082753] [] try_to_wake_up+0x224/0x370 [ 3.082836] [] default_wake_function+0x10/0x18 [ 3.082920] [] __wake_up_common+0x5c/0xa0 [ 3.083003] [] __wake_up_locked+0x14/0x20 [ 3.083086] [] complete+0x40/0x60 [ 3.083168] [] secondary_start_kernel+0x15c/0x1d0 [ 3.083240] [<00000000808911a4>] 0x808911a4 [ 3.113401] Detected PIPT I-cache on CPU2 Avoid updating the iterator if the next call to cpumask_next() would cause the for_each_cpu() loop to exit. There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s eventual call to _find_next_bit() will return early as start >= nbits), this patch just silences the warning. Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: James Morse Acked-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic-v3.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index ede5672ab34d..da6c0ba61d4f 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -548,7 +548,7 @@ static int gic_starting_cpu(unsigned int cpu) static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask, unsigned long cluster_id) { - int cpu = *base_cpu; + int next_cpu, cpu = *base_cpu; unsigned long mpidr = cpu_logical_map(cpu); u16 tlist = 0; @@ -562,9 +562,10 @@ static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask, tlist |= 1 << (mpidr & 0xf); - cpu = cpumask_next(cpu, mask); - if (cpu >= nr_cpu_ids) + next_cpu = cpumask_next(cpu, mask); + if (next_cpu >= nr_cpu_ids) goto out; + cpu = next_cpu; mpidr = cpu_logical_map(cpu); -- cgit v1.3-18-gd494 From babd6134a54d70efe875fa5661a20eaecb63f278 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Sun, 18 Sep 2016 18:20:27 +0300 Subject: net/mlx5: Fix flow counter bulk command out mailbox allocation The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c index 9134010e2921..287ade151ec8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c @@ -425,11 +425,11 @@ struct mlx5_cmd_fc_bulk * mlx5_cmd_fc_bulk_alloc(struct mlx5_core_dev *dev, u16 id, int num) { struct mlx5_cmd_fc_bulk *b; - int outlen = sizeof(*b) + + int outlen = MLX5_ST_SZ_BYTES(query_flow_counter_out) + MLX5_ST_SZ_BYTES(traffic_counter) * num; - b = kzalloc(outlen, GFP_KERNEL); + b = kzalloc(sizeof(*b) + outlen, GFP_KERNEL); if (!b) return NULL; -- cgit v1.3-18-gd494 From 4eea37d7b92076fdeac2a21e5f4dbd92d286719d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:28 +0300 Subject: net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 8b78f156214e..b247949df135 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1554,6 +1554,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode) abort: esw_enable_vport(esw, 0, UC_ADDR_CHANGE); + esw->mode = SRIOV_NONE; return err; } -- cgit v1.3-18-gd494 From 6c419ba8e2580ab17c164db6e918e163d3537ec1 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Sun, 18 Sep 2016 18:20:29 +0300 Subject: net/mlx5: E-Switch, Handle mode change failures E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 3dc83a9459a4..7de40e6b0c25 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -446,7 +446,7 @@ out: static int esw_offloads_start(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; if (esw->mode != SRIOV_LEGACY) { esw_warn(esw->dev, "Can't set offloads mode, SRIOV legacy not enabled\n"); @@ -455,8 +455,12 @@ static int esw_offloads_start(struct mlx5_eswitch *esw) mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); - if (err) - esw_warn(esw->dev, "Failed set eswitch to offloads, err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to offloads, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to legacy, err %d\n", err); + } return err; } @@ -508,12 +512,16 @@ create_ft_err: static int esw_offloads_stop(struct mlx5_eswitch *esw) { - int err, num_vfs = esw->dev->priv.sriov.num_vfs; + int err, err1, num_vfs = esw->dev->priv.sriov.num_vfs; mlx5_eswitch_disable_sriov(esw); err = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_LEGACY); - if (err) - esw_warn(esw->dev, "Failed set eswitch legacy mode. err %d\n", err); + if (err) { + esw_warn(esw->dev, "Failed setting eswitch to legacy, err %d\n", err); + err1 = mlx5_eswitch_enable_sriov(esw, num_vfs, SRIOV_OFFLOADS); + if (err1) + esw_warn(esw->dev, "Failed setting eswitch back to offloads, err %d\n", err); + } return err; } -- cgit v1.3-18-gd494 From 67a99b7061c07b190ac6c39f136afedbb7aa86e9 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 19 Sep 2016 17:47:41 +0300 Subject: qed: Fix stack corruption on probe Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index a240f26344a4..f776a77794c5 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1153,8 +1153,8 @@ qed_mcp_send_drv_version(struct qed_hwfn *p_hwfn, p_drv_version = &union_data.drv_version; p_drv_version->version = p_ver->version; - for (i = 0; i < MCP_DRV_VER_STR_SIZE - 1; i += 4) { - val = cpu_to_be32(p_ver->name[i]); + for (i = 0; i < (MCP_DRV_VER_STR_SIZE - 4) / sizeof(u32); i++) { + val = cpu_to_be32(*((u32 *)&p_ver->name[i * sizeof(u32)])); *(__be32 *)&p_drv_version->name[i * sizeof(u32)] = val; } -- cgit v1.3-18-gd494 From e875bd66dfb68f4e898e9a43ef42858c504a7f23 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 13 Sep 2016 17:53:35 +0100 Subject: irqchip/mips-gic: Fix local interrupts Since the device hierarchy domain was added by commit c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts have been broken. Users attempting to setup a per-cpu local IRQ, for example the GIC timer clock events code in drivers/clocksource/mips-gic-timer.c, the setup_percpu_irq function would refuse with -EINVAL because the GIC irqchip driver never called irq_set_percpu_devid so the IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because irq_set_percpu_devid was being called from the gic_irq_domain_map function which is no longer called. Doing only that runs into further problems because gic_dev_domain_alloc set the struct irq_chip for all interrupts, local or shared, to gic_level_irq_controller despite that only being suitable for shared interrupts. The typical outcome of this is that gic_level_irq_controller callback functions are called for local interrupts, and then hwirq number calculations overflow & the driver ends up attempting to access some invalid register with an address calculated from an invalid hwirq number. Best case scenario is that this then leads to a bus error. This is fixed by abstracting the setup of the hwirq & chip to a new function gic_setup_dev_chip which is used by both the root GIC IRQ domain & the device domain. Finally, decoding local interrupts failed because gic_dev_domain_alloc only called irq_domain_alloc_irqs_parent for shared interrupts. Local ones were therefore never associated with hwirqs in the root GIC IRQ domain and the virq in gic_handle_local_int would always be 0. This is fixed by calling irq_domain_alloc_irqs_parent unconditionally & having gic_irq_domain_alloc handle both local & shared interrupts, which is easy due to the aforementioned abstraction of chip setup into gic_setup_dev_chip. This fixes use of the MIPS GIC timer for clock events, which has been broken since c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") but hadn't been noticed due to a silent fallback to the MIPS coprocessor 0 count/compare clock events device. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Jason Cooper Cc: Qais Yousef Cc: stable@vger.kernel.org Cc: Marc Zyngier Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mips-gic.c | 105 ++++++++++++++++++++--------------------- 1 file changed, 50 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 83f498393a7f..6185696405d5 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -638,27 +638,6 @@ static int gic_local_irq_domain_map(struct irq_domain *d, unsigned int virq, if (!gic_local_irq_is_routable(intr)) return -EPERM; - /* - * HACK: These are all really percpu interrupts, but the rest - * of the MIPS kernel code does not use the percpu IRQ API for - * the CP0 timer and performance counter interrupts. - */ - switch (intr) { - case GIC_LOCAL_INT_TIMER: - case GIC_LOCAL_INT_PERFCTR: - case GIC_LOCAL_INT_FDC: - irq_set_chip_and_handler(virq, - &gic_all_vpes_local_irq_controller, - handle_percpu_irq); - break; - default: - irq_set_chip_and_handler(virq, - &gic_local_irq_controller, - handle_percpu_devid_irq); - irq_set_percpu_devid(virq); - break; - } - spin_lock_irqsave(&gic_lock, flags); for (i = 0; i < gic_vpes; i++) { u32 val = GIC_MAP_TO_PIN_MSK | gic_cpu_pin; @@ -724,16 +703,42 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq, return 0; } -static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq, - irq_hw_number_t hw) +static int gic_setup_dev_chip(struct irq_domain *d, unsigned int virq, + unsigned int hwirq) { - if (GIC_HWIRQ_TO_LOCAL(hw) < GIC_NUM_LOCAL_INTRS) - return gic_local_irq_domain_map(d, virq, hw); + struct irq_chip *chip; + int err; + + if (hwirq >= GIC_SHARED_HWIRQ_BASE) { + err = irq_domain_set_hwirq_and_chip(d, virq, hwirq, + &gic_level_irq_controller, + NULL); + } else { + switch (GIC_HWIRQ_TO_LOCAL(hwirq)) { + case GIC_LOCAL_INT_TIMER: + case GIC_LOCAL_INT_PERFCTR: + case GIC_LOCAL_INT_FDC: + /* + * HACK: These are all really percpu interrupts, but + * the rest of the MIPS kernel code does not use the + * percpu IRQ API for them. + */ + chip = &gic_all_vpes_local_irq_controller; + irq_set_handler(virq, handle_percpu_irq); + break; + + default: + chip = &gic_local_irq_controller; + irq_set_handler(virq, handle_percpu_devid_irq); + irq_set_percpu_devid(virq); + break; + } - irq_set_chip_and_handler(virq, &gic_level_irq_controller, - handle_level_irq); + err = irq_domain_set_hwirq_and_chip(d, virq, hwirq, + chip, NULL); + } - return gic_shared_irq_domain_map(d, virq, hw, 0); + return err; } static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq, @@ -744,15 +749,12 @@ static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq, int cpu, ret, i; if (spec->type == GIC_DEVICE) { - /* verify that it doesn't conflict with an IPI irq */ - if (test_bit(spec->hwirq, ipi_resrv)) + /* verify that shared irqs don't conflict with an IPI irq */ + if ((spec->hwirq >= GIC_SHARED_HWIRQ_BASE) && + test_bit(GIC_HWIRQ_TO_SHARED(spec->hwirq), ipi_resrv)) return -EBUSY; - hwirq = GIC_SHARED_TO_HWIRQ(spec->hwirq); - - return irq_domain_set_hwirq_and_chip(d, virq, hwirq, - &gic_level_irq_controller, - NULL); + return gic_setup_dev_chip(d, virq, spec->hwirq); } else { base_hwirq = find_first_bit(ipi_resrv, gic_shared_intrs); if (base_hwirq == gic_shared_intrs) { @@ -821,7 +823,6 @@ int gic_irq_domain_match(struct irq_domain *d, struct device_node *node, } static const struct irq_domain_ops gic_irq_domain_ops = { - .map = gic_irq_domain_map, .alloc = gic_irq_domain_alloc, .free = gic_irq_domain_free, .match = gic_irq_domain_match, @@ -852,29 +853,20 @@ static int gic_dev_domain_alloc(struct irq_domain *d, unsigned int virq, struct irq_fwspec *fwspec = arg; struct gic_irq_spec spec = { .type = GIC_DEVICE, - .hwirq = fwspec->param[1], }; int i, ret; - bool is_shared = fwspec->param[0] == GIC_SHARED; - if (is_shared) { - ret = irq_domain_alloc_irqs_parent(d, virq, nr_irqs, &spec); - if (ret) - return ret; - } - - for (i = 0; i < nr_irqs; i++) { - irq_hw_number_t hwirq; + if (fwspec->param[0] == GIC_SHARED) + spec.hwirq = GIC_SHARED_TO_HWIRQ(fwspec->param[1]); + else + spec.hwirq = GIC_LOCAL_TO_HWIRQ(fwspec->param[1]); - if (is_shared) - hwirq = GIC_SHARED_TO_HWIRQ(spec.hwirq + i); - else - hwirq = GIC_LOCAL_TO_HWIRQ(spec.hwirq + i); + ret = irq_domain_alloc_irqs_parent(d, virq, nr_irqs, &spec); + if (ret) + return ret; - ret = irq_domain_set_hwirq_and_chip(d, virq + i, - hwirq, - &gic_level_irq_controller, - NULL); + for (i = 0; i < nr_irqs; i++) { + ret = gic_setup_dev_chip(d, virq + i, spec.hwirq + i); if (ret) goto error; } @@ -896,7 +888,10 @@ void gic_dev_domain_free(struct irq_domain *d, unsigned int virq, static void gic_dev_domain_activate(struct irq_domain *domain, struct irq_data *d) { - gic_shared_irq_domain_map(domain, d->irq, d->hwirq, 0); + if (GIC_HWIRQ_TO_LOCAL(d->hwirq) < GIC_NUM_LOCAL_INTRS) + gic_local_irq_domain_map(domain, d->irq, d->hwirq); + else + gic_shared_irq_domain_map(domain, d->irq, d->hwirq, 0); } static struct irq_domain_ops gic_dev_domain_ops = { -- cgit v1.3-18-gd494 From 9b86a8d19bd6406a10de5f924bf2a003a502d427 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Tue, 20 Sep 2016 12:00:52 +0530 Subject: cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 4 ++-- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 15 +++++++++++++-- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 7 ++++++- drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h | 6 ++++++ drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h | 15 +++++++++++---- drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c | 9 +++++++-- 6 files changed, 45 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h index 2e2aa9fec9bb..edd23386b47d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h @@ -419,8 +419,8 @@ struct link_config { unsigned short supported; /* link capabilities */ unsigned short advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index c762a8c8c954..3ceafb55d6da 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -4305,10 +4305,17 @@ static const struct pci_error_handlers cxgb4_eeh = { .resume = eeh_resume, }; +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline void init_rspq(struct adapter *adap, struct sge_rspq *q, @@ -4756,8 +4763,12 @@ static void print_port_info(const struct net_device *dev) bufp += sprintf(bufp, "1000/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G) bufp += sprintf(bufp, "10G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G) + bufp += sprintf(bufp, "25G/"); if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G) bufp += sprintf(bufp, "40G/"); + if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G) + bufp += sprintf(bufp, "100G/"); if (bufp != buf) --bufp; sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type)); diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index dc92c80a75f4..660204bff726 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3627,7 +3627,8 @@ void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf) } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ FW_PORT_CAP_ANEG) /** @@ -7196,8 +7197,12 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; lc = &pi->link_cfg; diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h index a89b30720e38..30507d44422c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h @@ -2265,6 +2265,12 @@ enum fw_port_cap { FW_PORT_CAP_802_3_ASM_DIR = 0x8000, }; +#define FW_PORT_CAP_SPEED_S 0 +#define FW_PORT_CAP_SPEED_M 0x3f +#define FW_PORT_CAP_SPEED_V(x) ((x) << FW_PORT_CAP_SPEED_S) +#define FW_PORT_CAP_SPEED_G(x) \ + (((x) >> FW_PORT_CAP_SPEED_S) & FW_PORT_CAP_SPEED_M) + enum fw_port_mdi { FW_PORT_CAP_MDI_UNCHANGED, FW_PORT_CAP_MDI_AUTO, diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h index 8ee541431e8b..17a2bbcf93f0 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h @@ -108,8 +108,8 @@ struct link_config { unsigned int supported; /* link capabilities */ unsigned int advertising; /* advertised capabilities */ unsigned short lp_advertising; /* peer advertised capabilities */ - unsigned short requested_speed; /* speed user has requested */ - unsigned short speed; /* actual link speed */ + unsigned int requested_speed; /* speed user has requested */ + unsigned int speed; /* actual link speed */ unsigned char requested_fc; /* flow control user has requested */ unsigned char fc; /* actual link flow control */ unsigned char autoneg; /* autonegotiating? */ @@ -271,10 +271,17 @@ static inline bool is_10g_port(const struct link_config *lc) return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0; } +/* Return true if the Link Configuration supports "High Speeds" (those greater + * than 1Gb/s). + */ static inline bool is_x_10g_port(const struct link_config *lc) { - return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 || - (lc->supported & FW_PORT_CAP_SPEED_40G) != 0; + unsigned int speeds, high_speeds; + + speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported)); + high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G); + + return high_speeds != 0; } static inline unsigned int core_ticks_per_usec(const struct adapter *adapter) diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c index 427bfa71388b..b5622b1689e9 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c @@ -314,8 +314,9 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size, } #define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ - FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ - FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \ + FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \ + FW_PORT_CAP_ANEG) /** * init_link_config - initialize a link's SW state @@ -1712,8 +1713,12 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl) speed = 1000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G)) speed = 10000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G)) + speed = 25000; else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G)) speed = 40000; + else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G)) + speed = 100000; /* * Scan all of our "ports" (Virtual Interfaces) looking for -- cgit v1.3-18-gd494 From e6449539828ac3b7c74b648793291640bcca8259 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:05 +0800 Subject: r8152: move some functions Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 224 ++++++++++++++++++++++++------------------------ 1 file changed, 112 insertions(+), 112 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index f41a8ad4740e..ae7db460baa2 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2552,6 +2552,77 @@ static void r8152_aldps_en(struct r8152 *tp, bool enable) } } +static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg) +{ + ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev); + ocp_reg_write(tp, OCP_EEE_DATA, reg); + ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev); +} + +static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg) +{ + u16 data; + + r8152_mmd_indirect(tp, dev, reg); + data = ocp_reg_read(tp, OCP_EEE_DATA); + ocp_reg_write(tp, OCP_EEE_AR, 0x0000); + + return data; +} + +static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data) +{ + r8152_mmd_indirect(tp, dev, reg); + ocp_reg_write(tp, OCP_EEE_DATA, data); + ocp_reg_write(tp, OCP_EEE_AR, 0x0000); +} + +static void r8152_eee_en(struct r8152 *tp, bool enable) +{ + u16 config1, config2, config3; + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask; + config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2); + config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask; + + if (enable) { + ocp_data |= EEE_RX_EN | EEE_TX_EN; + config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN; + config1 |= sd_rise_time(1); + config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN; + config3 |= fast_snr(42); + } else { + ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); + config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | + RX_QUIET_EN); + config1 |= sd_rise_time(7); + config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN); + config3 |= fast_snr(511); + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + ocp_reg_write(tp, OCP_EEE_CONFIG1, config1); + ocp_reg_write(tp, OCP_EEE_CONFIG2, config2); + ocp_reg_write(tp, OCP_EEE_CONFIG3, config3); +} + +static void r8152b_enable_eee(struct r8152 *tp) +{ + r8152_eee_en(tp, true); + r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX); +} + +static void r8152b_enable_fc(struct r8152 *tp) +{ + u16 anar; + + anar = r8152_mdio_read(tp, MII_ADVERTISE); + anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + r8152_mdio_write(tp, MII_ADVERTISE, anar); +} + static void rtl8152_disable(struct r8152 *tp) { r8152_aldps_en(tp, false); @@ -2701,6 +2772,47 @@ static void r8152b_enter_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); } +static void r8153_aldps_en(struct r8152 *tp, bool enable) +{ + u16 data; + + data = ocp_reg_read(tp, OCP_POWER_CFG); + if (enable) { + data |= EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + } else { + data &= ~EN_ALDPS; + ocp_reg_write(tp, OCP_POWER_CFG, data); + msleep(20); + } +} + +static void r8153_eee_en(struct r8152 *tp, bool enable) +{ + u32 ocp_data; + u16 config; + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); + config = ocp_reg_read(tp, OCP_EEE_CFG); + + if (enable) { + ocp_data |= EEE_RX_EN | EEE_TX_EN; + config |= EEE10_EN; + } else { + ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); + config &= ~EEE10_EN; + } + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); + ocp_reg_write(tp, OCP_EEE_CFG, config); +} + +static void r8153_enable_eee(struct r8152 *tp) +{ + r8153_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); +} + static void r8153_hw_phy_cfg(struct r8152 *tp) { u32 ocp_data; @@ -2866,21 +2978,6 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); } -static void r8153_aldps_en(struct r8152 *tp, bool enable) -{ - u16 data; - - data = ocp_reg_read(tp, OCP_POWER_CFG); - if (enable) { - data |= EN_ALDPS; - ocp_reg_write(tp, OCP_POWER_CFG, data); - } else { - data &= ~EN_ALDPS; - ocp_reg_write(tp, OCP_POWER_CFG, data); - msleep(20); - } -} - static void rtl8153_disable(struct r8152 *tp) { r8153_aldps_en(tp, false); @@ -3246,103 +3343,6 @@ static int rtl8152_close(struct net_device *netdev) return res; } -static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg) -{ - ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev); - ocp_reg_write(tp, OCP_EEE_DATA, reg); - ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev); -} - -static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg) -{ - u16 data; - - r8152_mmd_indirect(tp, dev, reg); - data = ocp_reg_read(tp, OCP_EEE_DATA); - ocp_reg_write(tp, OCP_EEE_AR, 0x0000); - - return data; -} - -static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data) -{ - r8152_mmd_indirect(tp, dev, reg); - ocp_reg_write(tp, OCP_EEE_DATA, data); - ocp_reg_write(tp, OCP_EEE_AR, 0x0000); -} - -static void r8152_eee_en(struct r8152 *tp, bool enable) -{ - u16 config1, config2, config3; - u32 ocp_data; - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); - config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask; - config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2); - config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask; - - if (enable) { - ocp_data |= EEE_RX_EN | EEE_TX_EN; - config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN; - config1 |= sd_rise_time(1); - config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN; - config3 |= fast_snr(42); - } else { - ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); - config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | - RX_QUIET_EN); - config1 |= sd_rise_time(7); - config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN); - config3 |= fast_snr(511); - } - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); - ocp_reg_write(tp, OCP_EEE_CONFIG1, config1); - ocp_reg_write(tp, OCP_EEE_CONFIG2, config2); - ocp_reg_write(tp, OCP_EEE_CONFIG3, config3); -} - -static void r8152b_enable_eee(struct r8152 *tp) -{ - r8152_eee_en(tp, true); - r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX); -} - -static void r8153_eee_en(struct r8152 *tp, bool enable) -{ - u32 ocp_data; - u16 config; - - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); - config = ocp_reg_read(tp, OCP_EEE_CFG); - - if (enable) { - ocp_data |= EEE_RX_EN | EEE_TX_EN; - config |= EEE10_EN; - } else { - ocp_data &= ~(EEE_RX_EN | EEE_TX_EN); - config &= ~EEE10_EN; - } - - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); - ocp_reg_write(tp, OCP_EEE_CFG, config); -} - -static void r8153_enable_eee(struct r8152 *tp) -{ - r8153_eee_en(tp, true); - ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); -} - -static void r8152b_enable_fc(struct r8152 *tp) -{ - u16 anar; - - anar = r8152_mdio_read(tp, MII_ADVERTISE); - anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; - r8152_mdio_write(tp, MII_ADVERTISE, anar); -} - static void rtl_tally_reset(struct r8152 *tp) { u32 ocp_data; -- cgit v1.3-18-gd494 From 2dd436daac7848dbf3fe799cf59c1408871a14e3 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:06 +0800 Subject: r8152: move enabling PHY Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 43 +++++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ae7db460baa2..dbf11ba9d91c 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2632,14 +2632,6 @@ static void rtl8152_disable(struct r8152 *tp) static void r8152b_hw_phy_cfg(struct r8152 *tp) { - u16 data; - - data = r8152_mdio_read(tp, MII_BMCR); - if (data & BMCR_PDOWN) { - data &= ~BMCR_PDOWN; - r8152_mdio_write(tp, MII_BMCR, data); - } - set_bit(PHY_RESET, &tp->flags); } @@ -2818,16 +2810,6 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) u32 ocp_data; u16 data; - if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 || - tp->version == RTL_VER_05) - ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); - - data = r8152_mdio_read(tp, MII_BMCR); - if (data & BMCR_PDOWN) { - data &= ~BMCR_PDOWN; - r8152_mdio_write(tp, MII_BMCR, data); - } - if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); data &= ~CTAP_SHORT_EN; @@ -3355,10 +3337,17 @@ static void rtl_tally_reset(struct r8152 *tp) static void r8152b_init(struct r8152 *tp) { u32 ocp_data; + u16 data; if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; + data = r8152_mdio_read(tp, MII_BMCR); + if (data & BMCR_PDOWN) { + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + } + r8152_aldps_en(tp, false); if (tp->version == RTL_VER_01) { @@ -3394,6 +3383,7 @@ static void r8152b_init(struct r8152 *tp) static void r8153_init(struct r8152 *tp) { u32 ocp_data; + u16 data; int i; if (test_bit(RTL8152_UNPLUG, &tp->flags)) @@ -3416,6 +3406,23 @@ static void r8153_init(struct r8152 *tp) msleep(20); } + if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 || + tp->version == RTL_VER_05) + ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L); + + data = r8152_mdio_read(tp, MII_BMCR); + if (data & BMCR_PDOWN) { + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + } + + for (i = 0; i < 500; i++) { + ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK; + if (ocp_data == PHY_STAT_LAN_ON) + break; + msleep(20); + } + usb_disable_lpm(tp->udev); r8153_u2p3en(tp, false); -- cgit v1.3-18-gd494 From ef39df8eaba48c0de779440f41a648b17a560953 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:07 +0800 Subject: r8152: move PHY settings to hw_phy_cfg Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index dbf11ba9d91c..9ce5bd549482 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2632,6 +2632,10 @@ static void rtl8152_disable(struct r8152 *tp) static void r8152b_hw_phy_cfg(struct r8152 *tp) { + r8152b_enable_eee(tp); + r8152_aldps_en(tp, true); + r8152b_enable_fc(tp); + set_bit(PHY_RESET, &tp->flags); } @@ -2839,6 +2843,10 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) sram_write(tp, SRAM_10M_AMP1, 0x00af); sram_write(tp, SRAM_10M_AMP2, 0x0208); + r8153_enable_eee(tp); + r8153_aldps_en(tp, true); + r8152b_enable_fc(tp); + set_bit(PHY_RESET, &tp->flags); } @@ -3369,9 +3377,6 @@ static void r8152b_init(struct r8152 *tp) SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); - r8152b_enable_eee(tp); - r8152_aldps_en(tp, true); - r8152b_enable_fc(tp); rtl_tally_reset(tp); /* enable rx aggregation */ @@ -3490,9 +3495,6 @@ static void r8153_init(struct r8152 *tp) ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, 0); ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, 0); - r8153_enable_eee(tp); - r8153_aldps_en(tp, true); - r8152b_enable_fc(tp); rtl_tally_reset(tp); r8153_u2p3en(tp, true); } -- cgit v1.3-18-gd494 From af0287ec10c62c84cc5cd1bad4fd37644a1ac41d Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:08 +0800 Subject: r8152: remove r8153_enable_eee Remove r8153_enable_eee(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 9ce5bd549482..e7a05dd2be97 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2803,12 +2803,6 @@ static void r8153_eee_en(struct r8152 *tp, bool enable) ocp_reg_write(tp, OCP_EEE_CFG, config); } -static void r8153_enable_eee(struct r8152 *tp) -{ - r8153_eee_en(tp, true); - ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); -} - static void r8153_hw_phy_cfg(struct r8152 *tp) { u32 ocp_data; @@ -2843,7 +2837,9 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) sram_write(tp, SRAM_10M_AMP1, 0x00af); sram_write(tp, SRAM_10M_AMP2, 0x0208); - r8153_enable_eee(tp); + r8153_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); + r8153_aldps_en(tp, true); r8152b_enable_fc(tp); -- cgit v1.3-18-gd494 From d768c61bc353a0e0de3f839e1de99eee7d4eca10 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Tue, 20 Sep 2016 16:22:09 +0800 Subject: r8152: disable ALDPS and EEE before setting PHY Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e7a05dd2be97..c254248863d4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -32,7 +32,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "5" +#define NET_VERSION "6" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -2808,6 +2808,13 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) u32 ocp_data; u16 data; + /* disable ALDPS before updating the PHY parameters */ + r8153_aldps_en(tp, false); + + /* disable EEE before updating the PHY parameters */ + r8153_eee_en(tp, false); + ocp_reg_write(tp, OCP_EEE_ADV, 0); + if (tp->version == RTL_VER_03) { data = ocp_reg_read(tp, OCP_EEE_CFG); data &= ~CTAP_SHORT_EN; @@ -3390,7 +3397,6 @@ static void r8153_init(struct r8152 *tp) if (test_bit(RTL8152_UNPLUG, &tp->flags)) return; - r8153_aldps_en(tp, false); r8153_u1u2en(tp, false); for (i = 0; i < 500; i++) { -- cgit v1.3-18-gd494 From 8d58790b832e13d6006d842037732304af357c3c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 19 Sep 2016 21:34:01 +0200 Subject: net: can: ifi: Configure transmitter delay Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut Cc: Marc Kleine-Budde Cc: Mark Rutland Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ifi_canfd/ifi_canfd.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c index 2d1d22eec750..368bb0710d8f 100644 --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -81,6 +81,10 @@ #define IFI_CANFD_TIME_SET_TIMEA_4_12_6_6 BIT(15) #define IFI_CANFD_TDELAY 0x1c +#define IFI_CANFD_TDELAY_DEFAULT 0xb +#define IFI_CANFD_TDELAY_MASK 0x3fff +#define IFI_CANFD_TDELAY_ABS BIT(14) +#define IFI_CANFD_TDELAY_EN BIT(15) #define IFI_CANFD_ERROR 0x20 #define IFI_CANFD_ERROR_TX_OFFSET 0 @@ -641,7 +645,7 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) struct ifi_canfd_priv *priv = netdev_priv(ndev); const struct can_bittiming *bt = &priv->can.bittiming; const struct can_bittiming *dbt = &priv->can.data_bittiming; - u16 brp, sjw, tseg1, tseg2; + u16 brp, sjw, tseg1, tseg2, tdc; /* Configure bit timing */ brp = bt->brp - 2; @@ -664,6 +668,11 @@ static void ifi_canfd_set_bittiming(struct net_device *ndev) (brp << IFI_CANFD_TIME_PRESCALE_OFF) | (sjw << IFI_CANFD_TIME_SJW_OFF_7_9_8_8), priv->base + IFI_CANFD_FTIME); + + /* Configure transmitter delay */ + tdc = (dbt->brp * (dbt->phase_seg1 + 1)) & IFI_CANFD_TDELAY_MASK; + writel(IFI_CANFD_TDELAY_EN | IFI_CANFD_TDELAY_ABS | tdc, + priv->base + IFI_CANFD_TDELAY); } static void ifi_canfd_set_filter(struct net_device *ndev, const u32 id, -- cgit v1.3-18-gd494 From 371a015344b6e270e7e3632107d9554ec6d27a6b Mon Sep 17 00:00:00 2001 From: "Yadi.hu" Date: Sun, 18 Sep 2016 18:52:31 +0800 Subject: i2c-eg20t: fix race between i2c init and interrupt enable the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by: Yadi.hu Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-eg20t.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 137125b5eae7..5ce71ce7b6c4 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -773,13 +773,6 @@ static int pch_i2c_probe(struct pci_dev *pdev, /* Set the number of I2C channel instance */ adap_info->ch_num = id->driver_data; - ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, - KBUILD_MODNAME, adap_info); - if (ret) { - pch_pci_err(pdev, "request_irq FAILED\n"); - goto err_request_irq; - } - for (i = 0; i < adap_info->ch_num; i++) { pch_adap = &adap_info->pch_data[i].pch_adapter; adap_info->pch_i2c_suspended = false; @@ -797,6 +790,17 @@ static int pch_i2c_probe(struct pci_dev *pdev, pch_adap->dev.of_node = pdev->dev.of_node; pch_adap->dev.parent = &pdev->dev; + } + + ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, + KBUILD_MODNAME, adap_info); + if (ret) { + pch_pci_err(pdev, "request_irq FAILED\n"); + goto err_request_irq; + } + + for (i = 0; i < adap_info->ch_num; i++) { + pch_adap = &adap_info->pch_data[i].pch_adapter; pch_i2c_init(&adap_info->pch_data[i]); -- cgit v1.3-18-gd494 From 463e8f845cbf1c01e4cc8aeef1703212991d8e1e Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Wed, 14 Sep 2016 15:24:12 +0200 Subject: i2c: mux: pca954x: retry updating the mux selection on failure The cached value of the last selected channel prevents retries on the next call, even on failure to update the selected channel. Fix that. Signed-off-by: Peter Rosin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/muxes/i2c-mux-pca954x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 528e755c468f..3278ebf1cc5c 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -164,7 +164,7 @@ static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan) /* Only select the channel if its different from the last channel */ if (data->last_chan != regval) { ret = pca954x_reg_write(muxc->parent, client, regval); - data->last_chan = regval; + data->last_chan = ret ? 0 : regval; } return ret; -- cgit v1.3-18-gd494 From fba1296624bf95fc07057da1e26beee8a733180c Mon Sep 17 00:00:00 2001 From: Kamal Heib Date: Tue, 20 Sep 2016 14:55:31 +0300 Subject: net/mlx4_core: Fix to clean devlink resources This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 75dd2e3d3059..7183ac4135d2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -2970,6 +2970,7 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port) mlx4_err(dev, "Failed to create mtu file for port %d\n", port); device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); + devlink_port_unregister(&info->devlink_port); info->port = -1; } @@ -2984,6 +2985,8 @@ static void mlx4_cleanup_port_info(struct mlx4_port_info *info) device_remove_file(&info->dev->persist->pdev->dev, &info->port_attr); device_remove_file(&info->dev->persist->pdev->dev, &info->port_mtu_attr); + devlink_port_unregister(&info->devlink_port); + #ifdef CONFIG_RFS_ACCEL free_irq_cpu_rmap(info->rmap); info->rmap = NULL; -- cgit v1.3-18-gd494 From 005d675aa1909ad70456dec8c5b0ba9b60b52d24 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Thu, 22 Sep 2016 14:12:00 +0900 Subject: mmc: dw_mmc: fix the spamming log message When there is no Card which is set to "broken-cd", it's displayed a clock information continuously. Because it's polling for detecting card. This patch is fixed this problem. Fixes: 65257a0deed5 ("mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus()") Reported-by: Tobias Jakobi Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 14 +++++++++----- drivers/mmc/host/dw_mmc.h | 3 +++ 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 32380d5d4f6b..767af2026f8b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1112,11 +1112,12 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0; - dev_info(&slot->mmc->class_dev, - "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n", - slot->id, host->bus_hz, clock, - div ? ((host->bus_hz / div) >> 1) : - host->bus_hz, div); + if (clock != slot->__clk_old || force_clkinit) + dev_info(&slot->mmc->class_dev, + "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n", + slot->id, host->bus_hz, clock, + div ? ((host->bus_hz / div) >> 1) : + host->bus_hz, div); /* disable clock */ mci_writel(host, CLKENA, 0); @@ -1139,6 +1140,9 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) /* inform CIU */ mci_send_cmd(slot, sdmmc_cmd_bits, 0); + + /* keep the last clock value that was requested from core */ + slot->__clk_old = clock; } host->current_speed = clock; diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 9e740bc232a8..e8cd2dec3263 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -249,6 +249,8 @@ extern int dw_mci_resume(struct dw_mci *host); * @queue_node: List node for placing this node in the @queue list of * &struct dw_mci. * @clock: Clock rate configured by set_ios(). Protected by host->lock. + * @__clk_old: The last clock value that was requested from core. + * Keeping track of this helps us to avoid spamming the console. * @flags: Random state bits associated with the slot. * @id: Number of this slot. * @sdio_id: Number of this slot in the SDIO interrupt registers. @@ -263,6 +265,7 @@ struct dw_mci_slot { struct list_head queue_node; unsigned int clock; + unsigned int __clk_old; unsigned long flags; #define DW_MMC_CARD_PRESENT 0 -- cgit v1.3-18-gd494 From f0aa1ce6259eb65f53f969b3250c1d0aac84f30b Mon Sep 17 00:00:00 2001 From: Nikita Yushchenko Date: Thu, 22 Sep 2016 12:02:25 +0300 Subject: regmap: fix deadlock on _regmap_raw_write() error path Commit 815806e39bf6 ("regmap: drop cache if the bus transfer error") added a call to regcache_drop_region() to error path in _regmap_raw_write(). However that path runs with regmap lock taken, and regcache_drop_region() tries to re-take it, causing a deadlock. Fix that by calling map->cache_ops->drop() directly. Signed-off-by: Nikita Yushchenko Signed-off-by: Mark Brown --- drivers/base/regmap/regmap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 25d26bb18970..e964d068874d 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -1475,7 +1475,11 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg, kfree(buf); } else if (ret != 0 && !map->cache_bypass && map->format.parse_val) { - regcache_drop_region(map, reg, reg + 1); + /* regcache_drop_region() takes lock that we already have, + * thus call map->cache_ops->drop() directly + */ + if (map->cache_ops && map->cache_ops->drop) + map->cache_ops->drop(map, reg, reg + 1); } trace_regmap_hw_write_done(map, reg, val_len / map->format.val_bytes); -- cgit v1.3-18-gd494 From 331dcf421c34d227784d07943eb01e4023a42b0a Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 25 Aug 2016 12:23:39 +0100 Subject: i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended If the i2c device is already runtime suspended, if qup_i2c_suspend is executed during suspend-to-idle or suspend-to-ram it will result in the following splat: WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90 Modules linked in: CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) PC is at clk_core_unprepare+0x80/0x90 LR is at clk_unprepare+0x28/0x40 pc : [] lr : [] pstate: 60000145 Call trace: clk_core_unprepare+0x80/0x90 qup_i2c_disable_clocks+0x2c/0x68 qup_i2c_suspend+0x10/0x20 platform_pm_suspend+0x24/0x68 ... This patch fixes the issue by executing qup_i2c_pm_suspend_runtime conditionally in qup_i2c_suspend. Signed-off-by: Sudeep Holla Reviewed-by: Andy Gross Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-qup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 501bd15cb78e..a8497cfdae6f 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -1599,7 +1599,8 @@ static int qup_i2c_pm_resume_runtime(struct device *device) #ifdef CONFIG_PM_SLEEP static int qup_i2c_suspend(struct device *device) { - qup_i2c_pm_suspend_runtime(device); + if (!pm_runtime_suspended(device)) + return qup_i2c_pm_suspend_runtime(device); return 0; } -- cgit v1.3-18-gd494 From 3b4ac78610690bd83fb33762ef97e8b8a89285ae Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Thu, 22 Sep 2016 19:58:17 -0600 Subject: nvme-rdma: only clear queue flags after successful connect Otherwise, nvme_rdma_stop_and_clear_queue() will incorrectly try to stop/free rdma qps/cm_ids that are already freed. Fixes: e89ca58f9c90 ("nvme-rdma: add DELETING queue flag") Reported-by: Steve Wise Tested-by: Steve Wise Signed-off-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- drivers/nvme/host/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index c2c2c28e6eb5..fbdb2267e460 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -561,7 +561,6 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl, queue = &ctrl->queues[idx]; queue->ctrl = ctrl; - queue->flags = 0; init_completion(&queue->cm_done); if (idx > 0) @@ -595,6 +594,7 @@ static int nvme_rdma_init_queue(struct nvme_rdma_ctrl *ctrl, goto out_destroy_cm_id; } + clear_bit(NVME_RDMA_Q_DELETING, &queue->flags); set_bit(NVME_RDMA_Q_CONNECTED, &queue->flags); return 0; -- cgit v1.3-18-gd494