From abdd5dcc00207e7c38680f3754d1bfffafff1093 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 17 Jun 2019 10:56:49 -0700 Subject: Revert "brcmfmac: disable command decode in sdio_aos" This reverts commit 29f6589140a10ece8c1d73f58043ea5b3473ab3e. After that patch landed I find that my kernel log on rk3288-veyron-minnie and rk3288-veyron-speedy is filled with: brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110 This seems to happen every time the Broadcom WiFi transitions out of sleep mode. Reverting the commit fixes the problem for me, so that's what this patch does. Note that, in general, the justification in the original commit seemed a little weak. It looked like someone was testing on a SD card controller that would sometimes die if there were CRC errors on the bus. This used to happen back in early days of dw_mmc (the controller on my boards), but we fixed it. Disabling a feature on all boards just because one SD card controller is broken seems bad. Fixes: 29f6589140a1 ("brcmfmac: disable command decode in sdio_aos") Cc: Wright Feng Cc: Double Lo Cc: Madhan Mohan R Cc: Chi-Hsien Lin Signed-off-by: Douglas Anderson Cc: stable@vger.kernel.org Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 22b73da42822..b6466f3b38f4 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3375,11 +3375,7 @@ err: static bool brcmf_sdio_aos_no_decode(struct brcmf_sdio *bus) { - if (bus->ci->chip == CY_CC_43012_CHIP_ID || - bus->ci->chip == CY_CC_4373_CHIP_ID || - bus->ci->chip == BRCM_CC_4339_CHIP_ID || - bus->ci->chip == BRCM_CC_4345_CHIP_ID || - bus->ci->chip == BRCM_CC_4354_CHIP_ID) + if (bus->ci->chip == CY_CC_43012_CHIP_ID) return true; else return false; -- cgit v1.2.3-59-g8ed1b From 0a55f4ab9678413a01e740c86e9367ba0c612b36 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 17 Jun 2019 10:56:50 -0700 Subject: mmc: core: API to temporarily disable retuning for SDIO CRC errors Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- drivers/mmc/core/core.c | 5 +++-- drivers/mmc/core/sdio_io.c | 37 +++++++++++++++++++++++++++++++++++++ include/linux/mmc/host.h | 1 + include/linux/mmc/sdio_func.h | 3 +++ 4 files changed, 44 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 6db36dc870b5..9020cb2490f7 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -144,8 +144,9 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) int err = cmd->error; /* Flag re-tuning needed on CRC errors */ - if ((cmd->opcode != MMC_SEND_TUNING_BLOCK && - cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) && + if (cmd->opcode != MMC_SEND_TUNING_BLOCK && + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 && + !host->retune_crc_disable && (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || (mrq->data && mrq->data->error == -EILSEQ) || (mrq->stop && mrq->stop->error == -EILSEQ))) diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index f79f0b0caab8..0acb1a29c968 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -734,3 +734,40 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags) return 0; } EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags); + +/** + * sdio_retune_crc_disable - temporarily disable retuning on CRC errors + * @func: SDIO function attached to host + * + * If the SDIO card is known to be in a state where it might produce + * CRC errors on the bus in response to commands (like if we know it is + * transitioning between power states), an SDIO function driver can + * call this function to temporarily disable the SD/MMC core behavior of + * triggering an automatic retuning. + * + * This function should be called while the host is claimed and the host + * should remain claimed until sdio_retune_crc_enable() is called. + * Specifically, the expected sequence of calls is: + * - sdio_claim_host() + * - sdio_retune_crc_disable() + * - some number of calls like sdio_writeb() and sdio_readb() + * - sdio_retune_crc_enable() + * - sdio_release_host() + */ +void sdio_retune_crc_disable(struct sdio_func *func) +{ + func->card->host->retune_crc_disable = true; +} +EXPORT_SYMBOL_GPL(sdio_retune_crc_disable); + +/** + * sdio_retune_crc_enable - re-enable retuning on CRC errors + * @func: SDIO function attached to host + * + * This is the compement to sdio_retune_crc_disable(). + */ +void sdio_retune_crc_enable(struct sdio_func *func) +{ + func->card->host->retune_crc_disable = false; +} +EXPORT_SYMBOL_GPL(sdio_retune_crc_enable); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 43d0f0c496f6..ecb7972e2423 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -398,6 +398,7 @@ struct mmc_host { unsigned int retune_now:1; /* do re-tuning at next req */ unsigned int retune_paused:1; /* re-tuning is temporarily disabled */ unsigned int use_blk_mq:1; /* use blk-mq */ + unsigned int retune_crc_disable:1; /* don't trigger retune upon crc */ int rescan_disable; /* disable card detection */ int rescan_entered; /* used with nonremovable devices */ diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index e9dfdd501cd1..4820e6d09dac 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -167,4 +167,7 @@ extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b, extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func); extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags); +extern void sdio_retune_crc_disable(struct sdio_func *func); +extern void sdio_retune_crc_enable(struct sdio_func *func); + #endif /* LINUX_MMC_SDIO_FUNC_H */ -- cgit v1.2.3-59-g8ed1b From 2de0b42da263c97d330d276f5ccf7c4470e3324f Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 17 Jun 2019 10:56:51 -0700 Subject: brcmfmac: sdio: Disable auto-tuning around commands expected to fail There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail" Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done. Let's disable retuning around the commands we expect might fail. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Reviewed-by: Arend van Spriel Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index b6466f3b38f4..2ad8bdb7e073 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -678,6 +678,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) brcmf_dbg(TRACE, "Enter: on=%d\n", on); + sdio_retune_crc_disable(bus->sdiodev->func1); + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); @@ -738,6 +740,8 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) if (try_cnt > MAX_KSO_ATTEMPTS) brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + sdio_retune_crc_enable(bus->sdiodev->func1); + return err; } -- cgit v1.2.3-59-g8ed1b From b4c9f938d542d5f88c501744d2d12fad4fd2915f Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 17 Jun 2019 10:56:52 -0700 Subject: mmc: core: Add sdio_retune_hold_now() and sdio_retune_release() We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- drivers/mmc/core/sdio_io.c | 40 ++++++++++++++++++++++++++++++++++++++++ include/linux/mmc/sdio_func.h | 3 +++ 2 files changed, 43 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 0acb1a29c968..2ba00acf64e6 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -15,6 +15,7 @@ #include "sdio_ops.h" #include "core.h" #include "card.h" +#include "host.h" /** * sdio_claim_host - exclusively claim a bus for a certain SDIO function @@ -771,3 +772,42 @@ void sdio_retune_crc_enable(struct sdio_func *func) func->card->host->retune_crc_disable = false; } EXPORT_SYMBOL_GPL(sdio_retune_crc_enable); + +/** + * sdio_retune_hold_now - start deferring retuning requests till release + * @func: SDIO function attached to host + * + * This function can be called if it's currently a bad time to do + * a retune of the SDIO card. Retune requests made during this time + * will be held and we'll actually do the retune sometime after the + * release. + * + * This function could be useful if an SDIO card is in a power state + * where it can respond to a small subset of commands that doesn't + * include the retuning command. Care should be taken when using + * this function since (presumably) the retuning request we might be + * deferring was made for a good reason. + * + * This function should be called while the host is claimed. + */ +void sdio_retune_hold_now(struct sdio_func *func) +{ + mmc_retune_hold_now(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_retune_hold_now); + +/** + * sdio_retune_release - signal that it's OK to retune now + * @func: SDIO function attached to host + * + * This is the complement to sdio_retune_hold_now(). Calling this + * function won't make a retune happen right away but will allow + * them to be scheduled normally. + * + * This function should be called while the host is claimed. + */ +void sdio_retune_release(struct sdio_func *func) +{ + mmc_retune_release(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_retune_release); diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 4820e6d09dac..5a177f7a83c3 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -170,4 +170,7 @@ extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags); extern void sdio_retune_crc_disable(struct sdio_func *func); extern void sdio_retune_crc_enable(struct sdio_func *func); +extern void sdio_retune_hold_now(struct sdio_func *func); +extern void sdio_retune_release(struct sdio_func *func); + #endif /* LINUX_MMC_SDIO_FUNC_H */ -- cgit v1.2.3-59-g8ed1b From 65dade6044079a5c206fd1803642ff420061417a Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 17 Jun 2019 10:56:53 -0700 Subject: brcmfmac: sdio: Don't tune while the card is off When Broadcom SDIO cards are idled they go to sleep and a whole separate subsystem takes over their SDIO communication. This is the Always-On-Subsystem (AOS) and it can't handle tuning requests. Specifically, as tested on rk3288-veyron-minnie (which reports having BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control() when "on = 1" (aka we're transition from sleep to wake) by whacking: bus->sdiodev->func1->card->host->need_retune = 1 ...then I can often see tuning fail. In this case dw_mmc reports "All phases bad!"). Note that I don't get 100% failure, presumably because sometimes the card itself has already transitioned away from the AOS itself by the time we try to wake it up. If I force retuning when "on = 0" (AKA force retuning right before sending the command to go to sleep) then retuning is always OK. NOTE: we need _both_ this patch and the patch to avoid triggering tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac: sdio: Disable auto-tuning around commands expected to fail"). Though both patches handle issues with Broadcom's AOS, the problems are distinct: 1. We want to defer (but not ignore) asynchronous (like timer-requested) tuning requests till the card is awake. However, we want to ignore CRC errors during the transition, we don't want to queue deferred tuning request. 2. You could imagine that the AOS could implement retuning but we could still get errors while transitioning in and out of the AOS. Similarly you could imagine a seamless transition into and out of the AOS (with no CRC errors) even if the AOS couldn't handle tuning. ALSO NOTE: presumably there is never a desperate need to retune in order to wake up the card, since doing so is impossible. Luckily the only way the card can get into sleep state is if we had a good enough tuning to send it the command to put it into sleep, so presumably that "good enough" tuning is enough to wake us up, at least with a few retries. Cc: stable@vger.kernel.org #v4.18+ Signed-off-by: Douglas Anderson Acked-by: Adrian Hunter Reviewed-by: Arend van Spriel Acked-by: Kalle Valo Signed-off-by: Ulf Hansson --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 2ad8bdb7e073..9a51f1ba87c3 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -680,6 +680,10 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) sdio_retune_crc_disable(bus->sdiodev->func1); + /* Cannot re-tune if device is asleep; defer till we're awake */ + if (on) + sdio_retune_hold_now(bus->sdiodev->func1); + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); /* 1st KSO write goes to AOS wake up core if device is asleep */ brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); @@ -740,6 +744,9 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) if (try_cnt > MAX_KSO_ATTEMPTS) brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + if (on) + sdio_retune_release(bus->sdiodev->func1); + sdio_retune_crc_enable(bus->sdiodev->func1); return err; -- cgit v1.2.3-59-g8ed1b