From f8d1dcaf88bddc7f282722ec1fdddbcb06a72f18 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 27 Apr 2010 01:37:20 +0000 Subject: ixgbe: enable extremely low latency 82598/82599 can support EITR == 0, which allows for the absolutely lowest latency setting in the hardware. This disables writeback batching and anything else that relies upon a delayed interrupt. This patch enables the feature of "override" when a user sets rx-usecs to zero, the driver will respect that setting over using RSC, and automatically disable RSC. If rx-usecs is used to set the EITR value to 0, then the driver should disable LRO (aka RSC) internally until EITR is set to non-zero again. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 87 +++++++++++++++++++++++++++++++++++---- drivers/net/ixgbe/ixgbe_main.c | 9 ++++ 2 files changed, 87 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 8f461d5cee77..1ae0201f5aa6 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -2079,6 +2079,27 @@ static int ixgbe_get_coalesce(struct net_device *netdev, return 0; } +/* + * this function must be called before setting the new value of + * rx_itr_setting + */ +static void ixgbe_reenable_rsc(struct ixgbe_adapter *adapter, + struct ethtool_coalesce *ec) +{ + /* check the old value and enable RSC if necessary */ + if ((adapter->rx_itr_setting == 0) && + (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) { + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + adapter->netdev->features |= NETIF_F_LRO; + DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n", + ec->rx_coalesce_usecs); + if (netif_running(adapter->netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); + } +} + static int ixgbe_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { @@ -2095,11 +2116,20 @@ static int ixgbe_set_coalesce(struct net_device *netdev, adapter->tx_ring[0]->work_limit = ec->tx_max_coalesced_frames_irq; if (ec->rx_coalesce_usecs > 1) { + u32 max_int; + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) + max_int = IXGBE_MAX_RSC_INT_RATE; + else + max_int = IXGBE_MAX_INT_RATE; + /* check the limits */ - if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) || + if ((1000000/ec->rx_coalesce_usecs > max_int) || (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE)) return -EINVAL; + /* check the old value and enable RSC if necessary */ + ixgbe_reenable_rsc(adapter, ec); + /* store the value in ints/second */ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs; @@ -2108,6 +2138,9 @@ static int ixgbe_set_coalesce(struct net_device *netdev, /* clear the lower bit as its used for dynamic state */ adapter->rx_itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { + /* check the old value and enable RSC if necessary */ + ixgbe_reenable_rsc(adapter, ec); + /* 1 means dynamic mode */ adapter->rx_eitr_param = 20000; adapter->rx_itr_setting = 1; @@ -2116,14 +2149,34 @@ static int ixgbe_set_coalesce(struct net_device *netdev, * any other value means disable eitr, which is best * served by setting the interrupt rate very high */ - if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) - adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE; - else - adapter->rx_eitr_param = IXGBE_MAX_INT_RATE; + adapter->rx_eitr_param = IXGBE_MAX_INT_RATE; adapter->rx_itr_setting = 0; + + /* + * if hardware RSC is enabled, disable it when + * setting low latency mode, to avoid errata, assuming + * that when the user set low latency mode they want + * it at the cost of anything else + */ + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + netdev->features &= ~NETIF_F_LRO; + DPRINTK(PROBE, INFO, + "rx-usecs set to 0, disabling RSC\n"); + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); + return 0; + } } if (ec->tx_coalesce_usecs > 1) { + /* + * don't have to worry about max_int as above because + * tx vectors don't do hardware RSC (an rx function) + */ /* check the limits */ if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) || (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE)) @@ -2178,10 +2231,26 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data) ethtool_op_set_flags(netdev, data); /* if state changes we need to update adapter->flags and reset */ - if ((!!(data & ETH_FLAG_LRO)) != - (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) { - adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED; - need_reset = true; + if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) { + /* + * cast both to bool and verify if they are set the same + * but only enable RSC if itr is non-zero, as + * itr=0 and RSC are mutually exclusive + */ + if (((!!(data & ETH_FLAG_LRO)) != + (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) && + adapter->rx_itr_setting) { + adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED; + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + need_reset = true; + break; + default: + break; + } + } else if (!adapter->rx_itr_setting) { + netdev->features &= ~ETH_FLAG_LRO; + } } /* diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 32781b3f8964..0c4ca6822b70 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1189,6 +1189,15 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector) /* must write high and low 16 bits to reset counter */ itr_reg |= (itr_reg << 16); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + /* + * 82599 can support a value of zero, so allow it for + * max interrupt rate, but there is an errata where it can + * not be zero with RSC + */ + if (itr_reg == 8 && + !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) + itr_reg = 0; + /* * set the WDIS bit to not clear the timer bits and cause an * immediate assertion of the interrupt -- cgit v1.2.3-59-g8ed1b