From 4baa9922430662431231ac637adedddbb0cfb2d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 10:55:55 +0100 Subject: [ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King --- include/asm-arm/mach/udc_pxa2xx.h | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 include/asm-arm/mach/udc_pxa2xx.h (limited to 'include/asm-arm/mach/udc_pxa2xx.h') diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h deleted file mode 100644 index 9e5ed7c0f27f..000000000000 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/mach/udc_pxa2xx.h - * - * This supports machine-specific differences in how the PXA2xx - * USB Device Controller (UDC) is wired. - * - * It is set in linux/arch/arm/mach-pxa/.c or in - * linux/arch/mach-ixp4xx/.c and used in - * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c - */ - -struct pxa2xx_udc_mach_info { - int (*udc_is_connected)(void); /* do we see host? */ - void (*udc_command)(int cmd); -#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ -#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ - - /* Boards following the design guidelines in the developer's manual, - * with on-chip GPIOs not Lubbock's weird hardware, can have a sane - * VBUS IRQ and omit the methods above. Store the GPIO number - * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits. - * Note that sometimes the signals go through inverters... - */ - bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ - bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ -}; - -- cgit v1.2.3-59-g8ed1b