From a09e64fbc0094e3073dbb09c3b4bfe4ab669244b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Aug 2008 16:14:15 +0100 Subject: [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King --- include/asm-arm/arch-aaec2000/aaec2000.h | 207 -- include/asm-arm/arch-aaec2000/aaed2000.h | 40 - include/asm-arm/arch-aaec2000/debug-macro.S | 37 - include/asm-arm/arch-aaec2000/dma.h | 9 - include/asm-arm/arch-aaec2000/entry-macro.S | 40 - include/asm-arm/arch-aaec2000/hardware.h | 50 - include/asm-arm/arch-aaec2000/io.h | 20 - include/asm-arm/arch-aaec2000/irqs.h | 46 - include/asm-arm/arch-aaec2000/memory.h | 30 - include/asm-arm/arch-aaec2000/system.h | 24 - include/asm-arm/arch-aaec2000/timex.h | 18 - include/asm-arm/arch-aaec2000/uncompress.h | 46 - include/asm-arm/arch-aaec2000/vmalloc.h | 16 - include/asm-arm/arch-at91/at91_adc.h | 61 - include/asm-arm/arch-at91/at91_aic.h | 53 - include/asm-arm/arch-at91/at91_dbgu.h | 66 - include/asm-arm/arch-at91/at91_mci.h | 113 -- include/asm-arm/arch-at91/at91_pio.h | 49 - include/asm-arm/arch-at91/at91_pit.h | 29 - include/asm-arm/arch-at91/at91_pmc.h | 111 -- include/asm-arm/arch-at91/at91_rstc.h | 38 - include/asm-arm/arch-at91/at91_rtc.h | 75 - include/asm-arm/arch-at91/at91_rtt.h | 32 - include/asm-arm/arch-at91/at91_shdwc.h | 35 - include/asm-arm/arch-at91/at91_spi.h | 81 - include/asm-arm/arch-at91/at91_ssc.h | 106 - include/asm-arm/arch-at91/at91_st.h | 49 - include/asm-arm/arch-at91/at91_tc.h | 146 -- include/asm-arm/arch-at91/at91_twi.h | 68 - include/asm-arm/arch-at91/at91_wdt.h | 34 - include/asm-arm/arch-at91/at91cap9.h | 126 -- include/asm-arm/arch-at91/at91cap9_ddrsdr.h | 100 - include/asm-arm/arch-at91/at91cap9_matrix.h | 137 -- include/asm-arm/arch-at91/at91rm9200.h | 115 -- include/asm-arm/arch-at91/at91rm9200_emac.h | 138 -- include/asm-arm/arch-at91/at91rm9200_mc.h | 160 -- include/asm-arm/arch-at91/at91sam9260.h | 138 -- include/asm-arm/arch-at91/at91sam9260_matrix.h | 78 - include/asm-arm/arch-at91/at91sam9261.h | 105 - include/asm-arm/arch-at91/at91sam9261_matrix.h | 62 - include/asm-arm/arch-at91/at91sam9263.h | 127 -- include/asm-arm/arch-at91/at91sam9263_matrix.h | 129 -- include/asm-arm/arch-at91/at91sam9_sdramc.h | 83 - include/asm-arm/arch-at91/at91sam9_smc.h | 73 - include/asm-arm/arch-at91/at91sam9rl.h | 115 -- include/asm-arm/arch-at91/at91sam9rl_matrix.h | 96 - include/asm-arm/arch-at91/at91x40.h | 55 - include/asm-arm/arch-at91/board.h | 172 -- include/asm-arm/arch-at91/cpu.h | 103 - include/asm-arm/arch-at91/debug-macro.S | 39 - include/asm-arm/arch-at91/dma.h | 19 - include/asm-arm/arch-at91/entry-macro.S | 32 - include/asm-arm/arch-at91/gpio.h | 252 --- include/asm-arm/arch-at91/hardware.h | 92 - include/asm-arm/arch-at91/io.h | 48 - include/asm-arm/arch-at91/irqs.h | 48 - include/asm-arm/arch-at91/memory.h | 39 - include/asm-arm/arch-at91/system.h | 53 - include/asm-arm/arch-at91/timex.h | 77 - include/asm-arm/arch-at91/uncompress.h | 76 - include/asm-arm/arch-at91/vmalloc.h | 26 - include/asm-arm/arch-cl7500/acornfb.h | 33 - include/asm-arm/arch-cl7500/debug-macro.S | 21 - include/asm-arm/arch-cl7500/dma.h | 21 - include/asm-arm/arch-cl7500/entry-macro.S | 16 - include/asm-arm/arch-cl7500/hardware.h | 67 - include/asm-arm/arch-cl7500/io.h | 255 --- include/asm-arm/arch-cl7500/irq.h | 32 - include/asm-arm/arch-cl7500/irqs.h | 66 - include/asm-arm/arch-cl7500/memory.h | 35 - include/asm-arm/arch-cl7500/system.h | 23 - include/asm-arm/arch-cl7500/timex.h | 13 - include/asm-arm/arch-cl7500/uncompress.h | 35 - include/asm-arm/arch-cl7500/vmalloc.h | 4 - include/asm-arm/arch-clps711x/autcpu12.h | 78 - include/asm-arm/arch-clps711x/debug-macro.S | 46 - include/asm-arm/arch-clps711x/dma.h | 19 - include/asm-arm/arch-clps711x/entry-macro.S | 58 - include/asm-arm/arch-clps711x/hardware.h | 237 --- include/asm-arm/arch-clps711x/io.h | 38 - include/asm-arm/arch-clps711x/irqs.h | 53 - include/asm-arm/arch-clps711x/memory.h | 94 - include/asm-arm/arch-clps711x/syspld.h | 121 -- include/asm-arm/arch-clps711x/system.h | 40 - include/asm-arm/arch-clps711x/time.h | 49 - include/asm-arm/arch-clps711x/timex.h | 23 - include/asm-arm/arch-clps711x/uncompress.h | 59 - include/asm-arm/arch-clps711x/vmalloc.h | 20 - include/asm-arm/arch-davinci/clock.h | 22 - include/asm-arm/arch-davinci/common.h | 19 - include/asm-arm/arch-davinci/debug-macro.S | 21 - include/asm-arm/arch-davinci/dma.h | 16 - include/asm-arm/arch-davinci/entry-macro.S | 32 - include/asm-arm/arch-davinci/gpio.h | 159 -- include/asm-arm/arch-davinci/hardware.h | 52 - include/asm-arm/arch-davinci/i2c.h | 21 - include/asm-arm/arch-davinci/io.h | 79 - include/asm-arm/arch-davinci/irqs.h | 105 - include/asm-arm/arch-davinci/memory.h | 64 - include/asm-arm/arch-davinci/mux.h | 55 - include/asm-arm/arch-davinci/psc.h | 76 - include/asm-arm/arch-davinci/serial.h | 20 - include/asm-arm/arch-davinci/system.h | 29 - include/asm-arm/arch-davinci/timex.h | 17 - include/asm-arm/arch-davinci/uncompress.h | 35 - include/asm-arm/arch-davinci/vmalloc.h | 15 - include/asm-arm/arch-ebsa110/debug-macro.S | 21 - include/asm-arm/arch-ebsa110/dma.h | 11 - include/asm-arm/arch-ebsa110/entry-macro.S | 39 - include/asm-arm/arch-ebsa110/hardware.h | 63 - include/asm-arm/arch-ebsa110/io.h | 92 - include/asm-arm/arch-ebsa110/irqs.h | 20 - include/asm-arm/arch-ebsa110/memory.h | 37 - include/asm-arm/arch-ebsa110/system.h | 39 - include/asm-arm/arch-ebsa110/timex.h | 19 - include/asm-arm/arch-ebsa110/uncompress.h | 45 - include/asm-arm/arch-ebsa110/vmalloc.h | 10 - include/asm-arm/arch-ebsa285/debug-macro.S | 57 - include/asm-arm/arch-ebsa285/dma.h | 25 - include/asm-arm/arch-ebsa285/entry-macro.S | 113 -- include/asm-arm/arch-ebsa285/hardware.h | 105 - include/asm-arm/arch-ebsa285/io.h | 39 - include/asm-arm/arch-ebsa285/irqs.h | 98 - include/asm-arm/arch-ebsa285/memory.h | 67 - include/asm-arm/arch-ebsa285/system.h | 69 - include/asm-arm/arch-ebsa285/timex.h | 18 - include/asm-arm/arch-ebsa285/uncompress.h | 38 - include/asm-arm/arch-ebsa285/vmalloc.h | 10 - include/asm-arm/arch-ep93xx/debug-macro.S | 22 - include/asm-arm/arch-ep93xx/dma.h | 3 - include/asm-arm/arch-ep93xx/entry-macro.S | 59 - include/asm-arm/arch-ep93xx/ep93xx-regs.h | 133 -- include/asm-arm/arch-ep93xx/gesbc9312.h | 3 - include/asm-arm/arch-ep93xx/gpio.h | 128 -- include/asm-arm/arch-ep93xx/hardware.h | 16 - include/asm-arm/arch-ep93xx/io.h | 8 - include/asm-arm/arch-ep93xx/irqs.h | 78 - include/asm-arm/arch-ep93xx/memory.h | 14 - include/asm-arm/arch-ep93xx/platform.h | 20 - include/asm-arm/arch-ep93xx/system.h | 26 - include/asm-arm/arch-ep93xx/timex.h | 5 - include/asm-arm/arch-ep93xx/ts72xx.h | 101 - include/asm-arm/arch-ep93xx/uncompress.h | 85 - include/asm-arm/arch-ep93xx/vmalloc.h | 5 - include/asm-arm/arch-h720x/boards.h | 53 - include/asm-arm/arch-h720x/debug-macro.S | 40 - include/asm-arm/arch-h720x/dma.h | 26 - include/asm-arm/arch-h720x/entry-macro.S | 66 - include/asm-arm/arch-h720x/h7201-regs.h | 67 - include/asm-arm/arch-h720x/h7202-regs.h | 155 -- include/asm-arm/arch-h720x/hardware.h | 192 -- include/asm-arm/arch-h720x/io.h | 24 - include/asm-arm/arch-h720x/irqs.h | 116 -- include/asm-arm/arch-h720x/memory.h | 29 - include/asm-arm/arch-h720x/system.h | 33 - include/asm-arm/arch-h720x/timex.h | 15 - include/asm-arm/arch-h720x/uncompress.h | 37 - include/asm-arm/arch-h720x/vmalloc.h | 10 - include/asm-arm/arch-imx/debug-macro.S | 34 - include/asm-arm/arch-imx/dma.h | 56 - include/asm-arm/arch-imx/entry-macro.S | 32 - include/asm-arm/arch-imx/gpio.h | 102 - include/asm-arm/arch-imx/hardware.h | 91 - include/asm-arm/arch-imx/imx-dma.h | 94 - include/asm-arm/arch-imx/imx-regs.h | 482 ----- include/asm-arm/arch-imx/imx-uart.h | 12 - include/asm-arm/arch-imx/imxfb.h | 37 - include/asm-arm/arch-imx/io.h | 30 - include/asm-arm/arch-imx/irqs.h | 116 -- include/asm-arm/arch-imx/memory.h | 36 - include/asm-arm/arch-imx/mmc.h | 15 - include/asm-arm/arch-imx/mx1ads.h | 36 - include/asm-arm/arch-imx/spi_imx.h | 72 - include/asm-arm/arch-imx/system.h | 40 - include/asm-arm/arch-imx/timex.h | 26 - include/asm-arm/arch-imx/uncompress.h | 71 - include/asm-arm/arch-imx/vmalloc.h | 20 - include/asm-arm/arch-integrator/bits.h | 61 - include/asm-arm/arch-integrator/cm.h | 36 - include/asm-arm/arch-integrator/debug-macro.S | 22 - include/asm-arm/arch-integrator/dma.h | 19 - include/asm-arm/arch-integrator/entry-macro.S | 44 - include/asm-arm/arch-integrator/hardware.h | 48 - include/asm-arm/arch-integrator/impd1.h | 18 - include/asm-arm/arch-integrator/io.h | 36 - include/asm-arm/arch-integrator/irqs.h | 82 - include/asm-arm/arch-integrator/lm.h | 23 - include/asm-arm/arch-integrator/memory.h | 39 - include/asm-arm/arch-integrator/platform.h | 469 ----- include/asm-arm/arch-integrator/system.h | 44 - include/asm-arm/arch-integrator/timex.h | 26 - include/asm-arm/arch-integrator/uncompress.h | 50 - include/asm-arm/arch-integrator/vmalloc.h | 20 - include/asm-arm/arch-iop13xx/adma.h | 537 ----- include/asm-arm/arch-iop13xx/debug-macro.S | 26 - include/asm-arm/arch-iop13xx/dma.h | 3 - include/asm-arm/arch-iop13xx/entry-macro.S | 45 - include/asm-arm/arch-iop13xx/hardware.h | 28 - include/asm-arm/arch-iop13xx/io.h | 41 - include/asm-arm/arch-iop13xx/iop13xx.h | 526 ----- include/asm-arm/arch-iop13xx/iq81340.h | 28 - include/asm-arm/arch-iop13xx/irqs.h | 196 -- include/asm-arm/arch-iop13xx/memory.h | 64 - include/asm-arm/arch-iop13xx/msi.h | 11 - include/asm-arm/arch-iop13xx/pci.h | 57 - include/asm-arm/arch-iop13xx/system.h | 27 - include/asm-arm/arch-iop13xx/time.h | 107 - include/asm-arm/arch-iop13xx/timex.h | 3 - include/asm-arm/arch-iop13xx/uncompress.h | 23 - include/asm-arm/arch-iop13xx/vmalloc.h | 4 - include/asm-arm/arch-iop32x/adma.h | 5 - include/asm-arm/arch-iop32x/debug-macro.S | 20 - include/asm-arm/arch-iop32x/dma.h | 9 - include/asm-arm/arch-iop32x/entry-macro.S | 36 - include/asm-arm/arch-iop32x/glantank.h | 13 - include/asm-arm/arch-iop32x/gpio.h | 6 - include/asm-arm/arch-iop32x/hardware.h | 44 - include/asm-arm/arch-iop32x/io.h | 27 - include/asm-arm/arch-iop32x/iop32x.h | 37 - include/asm-arm/arch-iop32x/iq31244.h | 17 - include/asm-arm/arch-iop32x/iq80321.h | 17 - include/asm-arm/arch-iop32x/irqs.h | 50 - include/asm-arm/arch-iop32x/memory.h | 26 - include/asm-arm/arch-iop32x/n2100.h | 19 - include/asm-arm/arch-iop32x/system.h | 33 - include/asm-arm/arch-iop32x/time.h | 4 - include/asm-arm/arch-iop32x/timex.h | 9 - include/asm-arm/arch-iop32x/uncompress.h | 39 - include/asm-arm/arch-iop32x/vmalloc.h | 5 - include/asm-arm/arch-iop33x/adma.h | 5 - include/asm-arm/arch-iop33x/debug-macro.S | 24 - include/asm-arm/arch-iop33x/dma.h | 9 - include/asm-arm/arch-iop33x/entry-macro.S | 37 - include/asm-arm/arch-iop33x/gpio.h | 6 - include/asm-arm/arch-iop33x/hardware.h | 46 - include/asm-arm/arch-iop33x/io.h | 27 - include/asm-arm/arch-iop33x/iop33x.h | 43 - include/asm-arm/arch-iop33x/iq80331.h | 16 - include/asm-arm/arch-iop33x/iq80332.h | 16 - include/asm-arm/arch-iop33x/irqs.h | 60 - include/asm-arm/arch-iop33x/memory.h | 26 - include/asm-arm/arch-iop33x/system.h | 22 - include/asm-arm/arch-iop33x/time.h | 4 - include/asm-arm/arch-iop33x/timex.h | 9 - include/asm-arm/arch-iop33x/uncompress.h | 37 - include/asm-arm/arch-iop33x/vmalloc.h | 5 - include/asm-arm/arch-ixp2000/debug-macro.S | 27 - include/asm-arm/arch-ixp2000/dma.h | 9 - include/asm-arm/arch-ixp2000/enp2611.h | 46 - include/asm-arm/arch-ixp2000/entry-macro.S | 60 - include/asm-arm/arch-ixp2000/gpio.h | 48 - include/asm-arm/arch-ixp2000/hardware.h | 44 - include/asm-arm/arch-ixp2000/io.h | 134 -- include/asm-arm/arch-ixp2000/irqs.h | 207 -- include/asm-arm/arch-ixp2000/ixdp2x00.h | 92 - include/asm-arm/arch-ixp2000/ixdp2x01.h | 57 - include/asm-arm/arch-ixp2000/ixp2000-regs.h | 457 ----- include/asm-arm/arch-ixp2000/memory.h | 34 - include/asm-arm/arch-ixp2000/platform.h | 152 -- include/asm-arm/arch-ixp2000/system.h | 49 - include/asm-arm/arch-ixp2000/timex.h | 13 - include/asm-arm/arch-ixp2000/uncompress.h | 47 - include/asm-arm/arch-ixp2000/vmalloc.h | 20 - include/asm-arm/arch-ixp23xx/debug-macro.S | 26 - include/asm-arm/arch-ixp23xx/dma.h | 3 - include/asm-arm/arch-ixp23xx/entry-macro.S | 37 - include/asm-arm/arch-ixp23xx/hardware.h | 37 - include/asm-arm/arch-ixp23xx/io.h | 54 - include/asm-arm/arch-ixp23xx/irqs.h | 223 --- include/asm-arm/arch-ixp23xx/ixdp2351.h | 89 - include/asm-arm/arch-ixp23xx/ixp23xx.h | 298 --- include/asm-arm/arch-ixp23xx/memory.h | 48 - include/asm-arm/arch-ixp23xx/platform.h | 57 - include/asm-arm/arch-ixp23xx/system.h | 33 - include/asm-arm/arch-ixp23xx/time.h | 3 - include/asm-arm/arch-ixp23xx/timex.h | 7 - include/asm-arm/arch-ixp23xx/uncompress.h | 40 - include/asm-arm/arch-ixp23xx/vmalloc.h | 10 - include/asm-arm/arch-ixp4xx/avila.h | 39 - include/asm-arm/arch-ixp4xx/coyote.h | 33 - include/asm-arm/arch-ixp4xx/cpu.h | 46 - include/asm-arm/arch-ixp4xx/debug-macro.S | 24 - include/asm-arm/arch-ixp4xx/dma.h | 21 - include/asm-arm/arch-ixp4xx/dsmg600.h | 52 - include/asm-arm/arch-ixp4xx/entry-macro.S | 47 - include/asm-arm/arch-ixp4xx/fsg.h | 50 - include/asm-arm/arch-ixp4xx/gpio.h | 73 - include/asm-arm/arch-ixp4xx/gtwx5715.h | 116 -- include/asm-arm/arch-ixp4xx/hardware.h | 50 - include/asm-arm/arch-ixp4xx/io.h | 569 ------ include/asm-arm/arch-ixp4xx/irqs.h | 138 -- include/asm-arm/arch-ixp4xx/ixdp425.h | 39 - include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 638 ------ include/asm-arm/arch-ixp4xx/memory.h | 40 - include/asm-arm/arch-ixp4xx/nas100d.h | 52 - include/asm-arm/arch-ixp4xx/npe.h | 39 - include/asm-arm/arch-ixp4xx/nslu2.h | 55 - include/asm-arm/arch-ixp4xx/platform.h | 173 -- include/asm-arm/arch-ixp4xx/prpmc1100.h | 33 - include/asm-arm/arch-ixp4xx/qmgr.h | 126 -- include/asm-arm/arch-ixp4xx/system.h | 42 - include/asm-arm/arch-ixp4xx/timex.h | 15 - include/asm-arm/arch-ixp4xx/udc.h | 8 - include/asm-arm/arch-ixp4xx/uncompress.h | 57 - include/asm-arm/arch-ixp4xx/vmalloc.h | 5 - include/asm-arm/arch-kirkwood/debug-macro.S | 20 - include/asm-arm/arch-kirkwood/dma.h | 1 - include/asm-arm/arch-kirkwood/entry-macro.S | 40 - include/asm-arm/arch-kirkwood/hardware.h | 21 - include/asm-arm/arch-kirkwood/io.h | 26 - include/asm-arm/arch-kirkwood/irqs.h | 63 - include/asm-arm/arch-kirkwood/kirkwood.h | 100 - include/asm-arm/arch-kirkwood/memory.h | 14 - include/asm-arm/arch-kirkwood/system.h | 37 - include/asm-arm/arch-kirkwood/timex.h | 11 - include/asm-arm/arch-kirkwood/uncompress.h | 47 - include/asm-arm/arch-kirkwood/vmalloc.h | 5 - include/asm-arm/arch-ks8695/debug-macro.S | 38 - include/asm-arm/arch-ks8695/devices.h | 37 - include/asm-arm/arch-ks8695/dma.h | 17 - include/asm-arm/arch-ks8695/entry-macro.S | 53 - include/asm-arm/arch-ks8695/gpio.h | 79 - include/asm-arm/arch-ks8695/hardware.h | 49 - include/asm-arm/arch-ks8695/io.h | 19 - include/asm-arm/arch-ks8695/irqs.h | 54 - include/asm-arm/arch-ks8695/memory.h | 49 - include/asm-arm/arch-ks8695/regs-gpio.h | 55 - include/asm-arm/arch-ks8695/regs-hpna.h | 25 - include/asm-arm/arch-ks8695/regs-irq.h | 41 - include/asm-arm/arch-ks8695/regs-lan.h | 65 - include/asm-arm/arch-ks8695/regs-mem.h | 89 - include/asm-arm/arch-ks8695/regs-misc.h | 97 - include/asm-arm/arch-ks8695/regs-pci.h | 53 - include/asm-arm/arch-ks8695/regs-switch.h | 66 - include/asm-arm/arch-ks8695/regs-sys.h | 34 - include/asm-arm/arch-ks8695/regs-timer.h | 40 - include/asm-arm/arch-ks8695/regs-uart.h | 92 - include/asm-arm/arch-ks8695/regs-wan.h | 65 - include/asm-arm/arch-ks8695/system.h | 48 - include/asm-arm/arch-ks8695/timex.h | 20 - include/asm-arm/arch-ks8695/uncompress.h | 37 - include/asm-arm/arch-ks8695/vmalloc.h | 19 - include/asm-arm/arch-l7200/aux_reg.h | 28 - include/asm-arm/arch-l7200/debug-macro.S | 40 - include/asm-arm/arch-l7200/dma.h | 23 - include/asm-arm/arch-l7200/entry-macro.S | 35 - include/asm-arm/arch-l7200/gp_timers.h | 42 - include/asm-arm/arch-l7200/gpio.h | 105 - include/asm-arm/arch-l7200/hardware.h | 57 - include/asm-arm/arch-l7200/io.h | 27 - include/asm-arm/arch-l7200/irqs.h | 56 - include/asm-arm/arch-l7200/memory.h | 29 - include/asm-arm/arch-l7200/pmpcon.h | 46 - include/asm-arm/arch-l7200/pmu.h | 125 -- include/asm-arm/arch-l7200/serial.h | 37 - include/asm-arm/arch-l7200/serial_l7200.h | 101 - include/asm-arm/arch-l7200/sib.h | 119 -- include/asm-arm/arch-l7200/sys-clock.h | 67 - include/asm-arm/arch-l7200/system.h | 29 - include/asm-arm/arch-l7200/time.h | 73 - include/asm-arm/arch-l7200/timex.h | 20 - include/asm-arm/arch-l7200/uncompress.h | 39 - include/asm-arm/arch-l7200/vmalloc.h | 4 - include/asm-arm/arch-lh7a40x/clocks.h | 18 - include/asm-arm/arch-lh7a40x/constants.h | 91 - include/asm-arm/arch-lh7a40x/debug-macro.S | 39 - include/asm-arm/arch-lh7a40x/dma.h | 86 - include/asm-arm/arch-lh7a40x/entry-macro.S | 149 -- include/asm-arm/arch-lh7a40x/hardware.h | 62 - include/asm-arm/arch-lh7a40x/io.h | 22 - include/asm-arm/arch-lh7a40x/irqs.h | 200 -- include/asm-arm/arch-lh7a40x/memory.h | 76 - include/asm-arm/arch-lh7a40x/registers.h | 224 --- include/asm-arm/arch-lh7a40x/ssp.h | 71 - include/asm-arm/arch-lh7a40x/system.h | 19 - include/asm-arm/arch-lh7a40x/timex.h | 17 - include/asm-arm/arch-lh7a40x/uncompress.h | 38 - include/asm-arm/arch-lh7a40x/vmalloc.h | 10 - include/asm-arm/arch-loki/debug-macro.S | 20 - include/asm-arm/arch-loki/dma.h | 1 - include/asm-arm/arch-loki/entry-macro.S | 30 - include/asm-arm/arch-loki/hardware.h | 15 - include/asm-arm/arch-loki/io.h | 26 - include/asm-arm/arch-loki/irqs.h | 58 - include/asm-arm/arch-loki/loki.h | 97 - include/asm-arm/arch-loki/memory.h | 14 - include/asm-arm/arch-loki/system.h | 37 - include/asm-arm/arch-loki/timex.h | 11 - include/asm-arm/arch-loki/uncompress.h | 47 - include/asm-arm/arch-loki/vmalloc.h | 5 - include/asm-arm/arch-msm/board.h | 37 - include/asm-arm/arch-msm/debug-macro.S | 40 - include/asm-arm/arch-msm/dma.h | 151 -- include/asm-arm/arch-msm/entry-macro.S | 38 - include/asm-arm/arch-msm/hardware.h | 18 - include/asm-arm/arch-msm/io.h | 33 - include/asm-arm/arch-msm/irqs.h | 90 - include/asm-arm/arch-msm/memory.h | 27 - include/asm-arm/arch-msm/msm_iomap.h | 104 - include/asm-arm/arch-msm/system.h | 23 - include/asm-arm/arch-msm/timex.h | 21 - include/asm-arm/arch-msm/uncompress.h | 36 - include/asm-arm/arch-msm/vmalloc.h | 22 - include/asm-arm/arch-mv78xx0/debug-macro.S | 20 - include/asm-arm/arch-mv78xx0/dma.h | 1 - include/asm-arm/arch-mv78xx0/entry-macro.S | 39 - include/asm-arm/arch-mv78xx0/hardware.h | 21 - include/asm-arm/arch-mv78xx0/io.h | 26 - include/asm-arm/arch-mv78xx0/irqs.h | 91 - include/asm-arm/arch-mv78xx0/memory.h | 14 - include/asm-arm/arch-mv78xx0/mv78xx0.h | 126 -- include/asm-arm/arch-mv78xx0/system.h | 37 - include/asm-arm/arch-mv78xx0/timex.h | 9 - include/asm-arm/arch-mv78xx0/uncompress.h | 47 - include/asm-arm/arch-mv78xx0/vmalloc.h | 5 - include/asm-arm/arch-mxc/board-mx27ads.h | 354 ---- include/asm-arm/arch-mxc/board-mx31ads.h | 117 -- include/asm-arm/arch-mxc/board-mx31lite.h | 38 - include/asm-arm/arch-mxc/board-pcm037.h | 27 - include/asm-arm/arch-mxc/board-pcm038.h | 41 - include/asm-arm/arch-mxc/clock.h | 67 - include/asm-arm/arch-mxc/common.h | 20 - include/asm-arm/arch-mxc/debug-macro.S | 49 - include/asm-arm/arch-mxc/dma.h | 14 - include/asm-arm/arch-mxc/entry-macro.S | 39 - include/asm-arm/arch-mxc/gpio.h | 42 - include/asm-arm/arch-mxc/hardware.h | 37 - include/asm-arm/arch-mxc/iim.h | 77 - include/asm-arm/arch-mxc/imx-uart.h | 32 - include/asm-arm/arch-mxc/io.h | 22 - include/asm-arm/arch-mxc/iomux-mx1-mx2.h | 372 ---- include/asm-arm/arch-mxc/iomux-mx3.h | 501 ----- include/asm-arm/arch-mxc/irqs.h | 16 - include/asm-arm/arch-mxc/memory.h | 29 - include/asm-arm/arch-mxc/mx27.h | 302 --- include/asm-arm/arch-mxc/mx31.h | 384 ---- include/asm-arm/arch-mxc/mxc.h | 36 - include/asm-arm/arch-mxc/mxc_timer.h | 158 -- include/asm-arm/arch-mxc/system.h | 34 - include/asm-arm/arch-mxc/timex.h | 25 - include/asm-arm/arch-mxc/uncompress.h | 78 - include/asm-arm/arch-mxc/vmalloc.h | 26 - include/asm-arm/arch-netx/debug-macro.S | 38 - include/asm-arm/arch-netx/dma.h | 21 - include/asm-arm/arch-netx/entry-macro.S | 41 - include/asm-arm/arch-netx/eth.h | 27 - include/asm-arm/arch-netx/hardware.h | 39 - include/asm-arm/arch-netx/io.h | 28 - include/asm-arm/arch-netx/irqs.h | 70 - include/asm-arm/arch-netx/memory.h | 36 - include/asm-arm/arch-netx/netx-regs.h | 410 ---- include/asm-arm/arch-netx/param.h | 18 - include/asm-arm/arch-netx/pfifo.h | 54 - include/asm-arm/arch-netx/system.h | 38 - include/asm-arm/arch-netx/timex.h | 20 - include/asm-arm/arch-netx/uncompress.h | 76 - include/asm-arm/arch-netx/vmalloc.h | 19 - include/asm-arm/arch-netx/xc.h | 42 - include/asm-arm/arch-ns9xxx/board.h | 42 - include/asm-arm/arch-ns9xxx/debug-macro.S | 22 - include/asm-arm/arch-ns9xxx/dma.h | 14 - include/asm-arm/arch-ns9xxx/entry-macro.S | 28 - include/asm-arm/arch-ns9xxx/gpio.h | 47 - include/asm-arm/arch-ns9xxx/hardware.h | 79 - include/asm-arm/arch-ns9xxx/io.h | 20 - include/asm-arm/arch-ns9xxx/irqs.h | 86 - include/asm-arm/arch-ns9xxx/memory.h | 27 - include/asm-arm/arch-ns9xxx/module.h | 60 - include/asm-arm/arch-ns9xxx/processor-ns9360.h | 32 - include/asm-arm/arch-ns9xxx/processor.h | 42 - include/asm-arm/arch-ns9xxx/regs-bbu.h | 45 - .../asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h | 24 - include/asm-arm/arch-ns9xxx/regs-mem.h | 135 -- include/asm-arm/arch-ns9xxx/regs-sys-common.h | 31 - include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 148 -- include/asm-arm/arch-ns9xxx/system.h | 35 - include/asm-arm/arch-ns9xxx/timex.h | 20 - include/asm-arm/arch-ns9xxx/uncompress.h | 164 -- include/asm-arm/arch-ns9xxx/vmalloc.h | 16 - include/asm-arm/arch-omap/aic23.h | 116 -- include/asm-arm/arch-omap/blizzard.h | 12 - include/asm-arm/arch-omap/board-2430sdp.h | 39 - include/asm-arm/arch-omap/board-ams-delta.h | 76 - include/asm-arm/arch-omap/board-apollon.h | 38 - include/asm-arm/arch-omap/board-fsample.h | 51 - include/asm-arm/arch-omap/board-h2.h | 41 - include/asm-arm/arch-omap/board-h3.h | 36 - include/asm-arm/arch-omap/board-h4.h | 35 - include/asm-arm/arch-omap/board-innovator.h | 52 - include/asm-arm/arch-omap/board-nokia.h | 54 - include/asm-arm/arch-omap/board-osk.h | 47 - include/asm-arm/arch-omap/board-palmte.h | 32 - include/asm-arm/arch-omap/board-palmtt.h | 23 - include/asm-arm/arch-omap/board-palmz71.h | 26 - include/asm-arm/arch-omap/board-perseus2.h | 39 - include/asm-arm/arch-omap/board-sx1.h | 52 - include/asm-arm/arch-omap/board-voiceblue.h | 20 - include/asm-arm/arch-omap/board.h | 186 -- include/asm-arm/arch-omap/clock.h | 162 -- include/asm-arm/arch-omap/common.h | 69 - include/asm-arm/arch-omap/control.h | 189 -- include/asm-arm/arch-omap/cpu.h | 402 ---- include/asm-arm/arch-omap/debug-macro.S | 58 - include/asm-arm/arch-omap/dma.h | 570 ------ include/asm-arm/arch-omap/dmtimer.h | 84 - include/asm-arm/arch-omap/dsp_common.h | 40 - include/asm-arm/arch-omap/eac.h | 100 - include/asm-arm/arch-omap/entry-macro.S | 89 - include/asm-arm/arch-omap/fpga.h | 197 -- include/asm-arm/arch-omap/gpio-switch.h | 54 - include/asm-arm/arch-omap/gpio.h | 122 -- include/asm-arm/arch-omap/gpioexpander.h | 35 - include/asm-arm/arch-omap/gpmc.h | 96 - include/asm-arm/arch-omap/hardware.h | 355 ---- include/asm-arm/arch-omap/hwa742.h | 12 - include/asm-arm/arch-omap/io.h | 197 -- include/asm-arm/arch-omap/irda.h | 37 - include/asm-arm/arch-omap/irqs.h | 332 ---- include/asm-arm/arch-omap/keypad.h | 39 - include/asm-arm/arch-omap/lcd_mipid.h | 24 - include/asm-arm/arch-omap/led.h | 24 - include/asm-arm/arch-omap/mailbox.h | 73 - include/asm-arm/arch-omap/mcbsp.h | 380 ---- include/asm-arm/arch-omap/mcspi.h | 15 - include/asm-arm/arch-omap/memory.h | 103 - include/asm-arm/arch-omap/menelaus.h | 49 - include/asm-arm/arch-omap/mmc.h | 74 - include/asm-arm/arch-omap/mtd-xip.h | 61 - include/asm-arm/arch-omap/mux.h | 615 ------ include/asm-arm/arch-omap/nand.h | 24 - include/asm-arm/arch-omap/omap-alsa.h | 123 -- include/asm-arm/arch-omap/omap1510.h | 48 - include/asm-arm/arch-omap/omap16xx.h | 197 -- include/asm-arm/arch-omap/omap24xx.h | 107 - include/asm-arm/arch-omap/omap34xx.h | 72 - include/asm-arm/arch-omap/omap730.h | 102 - include/asm-arm/arch-omap/omapfb.h | 395 ---- include/asm-arm/arch-omap/onenand.h | 21 - include/asm-arm/arch-omap/param.h | 8 - include/asm-arm/arch-omap/pm.h | 356 ---- include/asm-arm/arch-omap/prcm.h | 33 - include/asm-arm/arch-omap/sdrc.h | 75 - include/asm-arm/arch-omap/serial.h | 37 - include/asm-arm/arch-omap/sram.h | 56 - include/asm-arm/arch-omap/system.h | 49 - include/asm-arm/arch-omap/tc.h | 106 - include/asm-arm/arch-omap/timex.h | 41 - include/asm-arm/arch-omap/uncompress.h | 83 - include/asm-arm/arch-omap/usb.h | 141 -- include/asm-arm/arch-omap/vmalloc.h | 21 - include/asm-arm/arch-orion5x/debug-macro.S | 22 - include/asm-arm/arch-orion5x/dma.h | 1 - include/asm-arm/arch-orion5x/entry-macro.S | 31 - include/asm-arm/arch-orion5x/gpio.h | 28 - include/asm-arm/arch-orion5x/hardware.h | 21 - include/asm-arm/arch-orion5x/io.h | 63 - include/asm-arm/arch-orion5x/irqs.h | 62 - include/asm-arm/arch-orion5x/memory.h | 16 - include/asm-arm/arch-orion5x/orion5x.h | 162 -- include/asm-arm/arch-orion5x/system.h | 32 - include/asm-arm/arch-orion5x/timex.h | 13 - include/asm-arm/arch-orion5x/uncompress.h | 49 - include/asm-arm/arch-orion5x/vmalloc.h | 5 - include/asm-arm/arch-pnx4008/clock.h | 62 - include/asm-arm/arch-pnx4008/debug-macro.S | 23 - include/asm-arm/arch-pnx4008/dma.h | 162 -- include/asm-arm/arch-pnx4008/entry-macro.S | 127 -- include/asm-arm/arch-pnx4008/gpio.h | 241 --- include/asm-arm/arch-pnx4008/hardware.h | 32 - include/asm-arm/arch-pnx4008/i2c.h | 67 - include/asm-arm/arch-pnx4008/io.h | 21 - include/asm-arm/arch-pnx4008/irq.h | 42 - include/asm-arm/arch-pnx4008/irqs.h | 215 -- include/asm-arm/arch-pnx4008/memory.h | 24 - include/asm-arm/arch-pnx4008/param.h | 21 - include/asm-arm/arch-pnx4008/platform.h | 69 - include/asm-arm/arch-pnx4008/pm.h | 33 - include/asm-arm/arch-pnx4008/system.h | 38 - include/asm-arm/arch-pnx4008/timex.h | 73 - include/asm-arm/arch-pnx4008/uncompress.h | 46 - include/asm-arm/arch-pnx4008/vmalloc.h | 20 - include/asm-arm/arch-pxa/akita.h | 32 - include/asm-arm/arch-pxa/audio.h | 17 - include/asm-arm/arch-pxa/bitfield.h | 113 -- include/asm-arm/arch-pxa/camera.h | 48 - include/asm-arm/arch-pxa/colibri.h | 19 - include/asm-arm/arch-pxa/corgi.h | 109 - include/asm-arm/arch-pxa/debug-macro.S | 25 - include/asm-arm/arch-pxa/dma.h | 50 - include/asm-arm/arch-pxa/entry-macro.S | 57 - include/asm-arm/arch-pxa/eseries-gpio.h | 50 - include/asm-arm/arch-pxa/eseries-irq.h | 27 - include/asm-arm/arch-pxa/gpio.h | 65 - include/asm-arm/arch-pxa/gumstix.h | 96 - include/asm-arm/arch-pxa/hardware.h | 240 --- include/asm-arm/arch-pxa/i2c.h | 77 - include/asm-arm/arch-pxa/idp.h | 199 -- include/asm-arm/arch-pxa/io.h | 20 - include/asm-arm/arch-pxa/irda.h | 23 - include/asm-arm/arch-pxa/irqs.h | 264 --- include/asm-arm/arch-pxa/littleton.h | 6 - include/asm-arm/arch-pxa/lpd270.h | 38 - include/asm-arm/arch-pxa/lubbock.h | 40 - include/asm-arm/arch-pxa/magician.h | 117 -- include/asm-arm/arch-pxa/mainstone.h | 120 -- include/asm-arm/arch-pxa/memory.h | 52 - include/asm-arm/arch-pxa/mfp-pxa25x.h | 161 -- include/asm-arm/arch-pxa/mfp-pxa27x.h | 433 ---- include/asm-arm/arch-pxa/mfp-pxa2xx.h | 133 -- include/asm-arm/arch-pxa/mfp-pxa300.h | 575 ------ include/asm-arm/arch-pxa/mfp-pxa320.h | 447 ----- include/asm-arm/arch-pxa/mfp-pxa3xx.h | 252 --- include/asm-arm/arch-pxa/mfp-pxa930.h | 491 ----- include/asm-arm/arch-pxa/mfp.h | 319 --- include/asm-arm/arch-pxa/mmc.h | 23 - include/asm-arm/arch-pxa/mtd-xip.h | 37 - include/asm-arm/arch-pxa/ohci.h | 20 - include/asm-arm/arch-pxa/palmtx.h | 106 - include/asm-arm/arch-pxa/pcm027.h | 75 - include/asm-arm/arch-pxa/pcm990_baseboard.h | 275 --- include/asm-arm/arch-pxa/pm.h | 27 - include/asm-arm/arch-pxa/poodle.h | 75 - include/asm-arm/arch-pxa/pxa-regs.h | 1070 ---------- include/asm-arm/arch-pxa/pxa25x-udc.h | 163 -- include/asm-arm/arch-pxa/pxa27x-udc.h | 257 --- include/asm-arm/arch-pxa/pxa27x_keypad.h | 58 - include/asm-arm/arch-pxa/pxa2xx-gpio.h | 368 ---- include/asm-arm/arch-pxa/pxa2xx-regs.h | 246 --- include/asm-arm/arch-pxa/pxa2xx_spi.h | 46 - include/asm-arm/arch-pxa/pxa3xx-regs.h | 183 -- include/asm-arm/arch-pxa/pxa3xx_nand.h | 20 - include/asm-arm/arch-pxa/pxafb.h | 151 -- include/asm-arm/arch-pxa/regs-lcd.h | 180 -- include/asm-arm/arch-pxa/regs-ssp.h | 127 -- include/asm-arm/arch-pxa/sharpsl.h | 34 - include/asm-arm/arch-pxa/spitz.h | 158 -- include/asm-arm/arch-pxa/ssp.h | 83 - include/asm-arm/arch-pxa/system.h | 24 - include/asm-arm/arch-pxa/timex.h | 26 - include/asm-arm/arch-pxa/tosa.h | 198 -- include/asm-arm/arch-pxa/tosa_bt.h | 22 - include/asm-arm/arch-pxa/trizeps4.h | 106 - include/asm-arm/arch-pxa/udc.h | 8 - include/asm-arm/arch-pxa/uncompress.h | 45 - include/asm-arm/arch-pxa/vmalloc.h | 11 - include/asm-arm/arch-pxa/zylonite.h | 47 - include/asm-arm/arch-realview/board-eb.h | 191 -- include/asm-arm/arch-realview/board-pb1176.h | 152 -- include/asm-arm/arch-realview/board-pb11mp.h | 186 -- include/asm-arm/arch-realview/debug-macro.S | 22 - include/asm-arm/arch-realview/dma.h | 20 - include/asm-arm/arch-realview/entry-macro.S | 81 - include/asm-arm/arch-realview/hardware.h | 31 - include/asm-arm/arch-realview/io.h | 33 - include/asm-arm/arch-realview/irqs.h | 38 - include/asm-arm/arch-realview/memory.h | 38 - include/asm-arm/arch-realview/platform.h | 293 --- include/asm-arm/arch-realview/scu.h | 13 - include/asm-arm/arch-realview/smp.h | 30 - include/asm-arm/arch-realview/system.h | 51 - include/asm-arm/arch-realview/timex.h | 23 - include/asm-arm/arch-realview/uncompress.h | 72 - include/asm-arm/arch-realview/vmalloc.h | 21 - include/asm-arm/arch-rpc/acornfb.h | 140 -- include/asm-arm/arch-rpc/debug-macro.S | 25 - include/asm-arm/arch-rpc/dma.h | 33 - include/asm-arm/arch-rpc/entry-macro.S | 16 - include/asm-arm/arch-rpc/hardware.h | 83 - include/asm-arm/arch-rpc/io.h | 258 --- include/asm-arm/arch-rpc/irqs.h | 46 - include/asm-arm/arch-rpc/memory.h | 39 - include/asm-arm/arch-rpc/system.h | 27 - include/asm-arm/arch-rpc/timex.h | 17 - include/asm-arm/arch-rpc/uncompress.h | 198 -- include/asm-arm/arch-rpc/vmalloc.h | 10 - include/asm-arm/arch-s3c2400/map.h | 66 - include/asm-arm/arch-s3c2400/memory.h | 23 - include/asm-arm/arch-s3c2410/anubis-cpld.h | 25 - include/asm-arm/arch-s3c2410/anubis-irq.h | 21 - include/asm-arm/arch-s3c2410/anubis-map.h | 38 - include/asm-arm/arch-s3c2410/audio.h | 45 - include/asm-arm/arch-s3c2410/bast-cpld.h | 53 - include/asm-arm/arch-s3c2410/bast-irq.h | 29 - include/asm-arm/arch-s3c2410/bast-map.h | 146 -- include/asm-arm/arch-s3c2410/bast-pmu.h | 40 - include/asm-arm/arch-s3c2410/debug-macro.S | 102 - include/asm-arm/arch-s3c2410/dma.h | 453 ----- include/asm-arm/arch-s3c2410/entry-macro.S | 78 - include/asm-arm/arch-s3c2410/fb.h | 74 - include/asm-arm/arch-s3c2410/gpio.h | 18 - include/asm-arm/arch-s3c2410/h1940-latch.h | 64 - include/asm-arm/arch-s3c2410/h1940.h | 21 - include/asm-arm/arch-s3c2410/hardware.h | 137 -- include/asm-arm/arch-s3c2410/idle.h | 24 - include/asm-arm/arch-s3c2410/io.h | 218 -- include/asm-arm/arch-s3c2410/irqs.h | 166 -- include/asm-arm/arch-s3c2410/leds-gpio.h | 28 - include/asm-arm/arch-s3c2410/map.h | 178 -- include/asm-arm/arch-s3c2410/memory.h | 19 - include/asm-arm/arch-s3c2410/osiris-cpld.h | 30 - include/asm-arm/arch-s3c2410/osiris-map.h | 42 - include/asm-arm/arch-s3c2410/otom-map.h | 30 - include/asm-arm/arch-s3c2410/regs-clock.h | 197 -- include/asm-arm/arch-s3c2410/regs-dsc.h | 184 -- include/asm-arm/arch-s3c2410/regs-gpio.h | 1163 ----------- include/asm-arm/arch-s3c2410/regs-gpioj.h | 106 - include/asm-arm/arch-s3c2410/regs-irq.h | 43 - include/asm-arm/arch-s3c2410/regs-lcd.h | 162 -- include/asm-arm/arch-s3c2410/regs-mem.h | 220 --- include/asm-arm/arch-s3c2410/regs-power.h | 40 - include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h | 29 - include/asm-arm/arch-s3c2410/regs-s3c2412.h | 23 - include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 195 -- include/asm-arm/arch-s3c2410/regs-sdi.h | 127 -- include/asm-arm/arch-s3c2410/reset.h | 22 - include/asm-arm/arch-s3c2410/spi-gpio.h | 27 - include/asm-arm/arch-s3c2410/spi.h | 25 - include/asm-arm/arch-s3c2410/system-reset.h | 64 - include/asm-arm/arch-s3c2410/system.h | 58 - include/asm-arm/arch-s3c2410/timex.h | 26 - include/asm-arm/arch-s3c2410/uncompress.h | 52 - include/asm-arm/arch-s3c2410/usb-control.h | 41 - include/asm-arm/arch-s3c2410/vmalloc.h | 20 - include/asm-arm/arch-s3c2410/vr1000-cpld.h | 18 - include/asm-arm/arch-s3c2410/vr1000-irq.h | 26 - include/asm-arm/arch-s3c2410/vr1000-map.h | 110 -- include/asm-arm/arch-sa1100/SA-1100.h | 2072 -------------------- include/asm-arm/arch-sa1100/SA-1101.h | 925 --------- include/asm-arm/arch-sa1100/SA-1111.h | 5 - include/asm-arm/arch-sa1100/assabet.h | 105 - include/asm-arm/arch-sa1100/badge4.h | 75 - include/asm-arm/arch-sa1100/bitfield.h | 113 -- include/asm-arm/arch-sa1100/cerf.h | 28 - include/asm-arm/arch-sa1100/collie.h | 88 - include/asm-arm/arch-sa1100/debug-macro.S | 58 - include/asm-arm/arch-sa1100/dma.h | 117 -- include/asm-arm/arch-sa1100/entry-macro.S | 47 - include/asm-arm/arch-sa1100/gpio.h | 68 - include/asm-arm/arch-sa1100/h3600.h | 169 -- include/asm-arm/arch-sa1100/h3600_gpio.h | 540 ----- include/asm-arm/arch-sa1100/hardware.h | 57 - include/asm-arm/arch-sa1100/ide.h | 75 - include/asm-arm/arch-sa1100/io.h | 26 - include/asm-arm/arch-sa1100/irqs.h | 197 -- include/asm-arm/arch-sa1100/jornada720.h | 27 - include/asm-arm/arch-sa1100/lart.h | 13 - include/asm-arm/arch-sa1100/mcp.h | 21 - include/asm-arm/arch-sa1100/memory.h | 68 - include/asm-arm/arch-sa1100/mtd-xip.h | 26 - include/asm-arm/arch-sa1100/neponset.h | 74 - include/asm-arm/arch-sa1100/shannon.h | 43 - include/asm-arm/arch-sa1100/simpad.h | 112 -- include/asm-arm/arch-sa1100/system.h | 22 - include/asm-arm/arch-sa1100/timex.h | 12 - include/asm-arm/arch-sa1100/uncompress.h | 50 - include/asm-arm/arch-sa1100/vmalloc.h | 4 - include/asm-arm/arch-shark/debug-macro.S | 31 - include/asm-arm/arch-shark/dma.h | 18 - include/asm-arm/arch-shark/entry-macro.S | 41 - include/asm-arm/arch-shark/hardware.h | 51 - include/asm-arm/arch-shark/io.h | 56 - include/asm-arm/arch-shark/irqs.h | 13 - include/asm-arm/arch-shark/memory.h | 48 - include/asm-arm/arch-shark/system.h | 28 - include/asm-arm/arch-shark/timex.h | 7 - include/asm-arm/arch-shark/uncompress.h | 51 - include/asm-arm/arch-shark/vmalloc.h | 4 - include/asm-arm/arch-versatile/debug-macro.S | 23 - include/asm-arm/arch-versatile/dma.h | 20 - include/asm-arm/arch-versatile/entry-macro.S | 44 - include/asm-arm/arch-versatile/hardware.h | 52 - include/asm-arm/arch-versatile/io.h | 32 - include/asm-arm/arch-versatile/irqs.h | 211 -- include/asm-arm/arch-versatile/memory.h | 38 - include/asm-arm/arch-versatile/platform.h | 510 ----- include/asm-arm/arch-versatile/system.h | 49 - include/asm-arm/arch-versatile/timex.h | 23 - include/asm-arm/arch-versatile/uncompress.h | 46 - include/asm-arm/arch-versatile/vmalloc.h | 21 - include/asm-arm/plat-s3c/iic.h | 2 +- include/asm-arm/plat-s3c/nand.h | 2 +- include/asm-arm/plat-s3c/regs-ac97.h | 2 +- include/asm-arm/plat-s3c/regs-adc.h | 2 +- include/asm-arm/plat-s3c/regs-iic.h | 2 +- include/asm-arm/plat-s3c/regs-nand.h | 2 +- include/asm-arm/plat-s3c/regs-rtc.h | 2 +- include/asm-arm/plat-s3c/regs-serial.h | 2 +- include/asm-arm/plat-s3c/regs-timer.h | 2 +- include/asm-arm/plat-s3c/regs-watchdog.h | 2 +- include/asm-arm/plat-s3c24xx/regs-iis.h | 2 +- include/asm-arm/plat-s3c24xx/regs-spi.h | 2 +- include/asm-arm/plat-s3c24xx/regs-udc.h | 2 +- include/asm-arm/plat-s3c24xx/udc.h | 2 +- 793 files changed, 14 insertions(+), 62504 deletions(-) delete mode 100644 include/asm-arm/arch-aaec2000/aaec2000.h delete mode 100644 include/asm-arm/arch-aaec2000/aaed2000.h delete mode 100644 include/asm-arm/arch-aaec2000/debug-macro.S delete mode 100644 include/asm-arm/arch-aaec2000/dma.h delete mode 100644 include/asm-arm/arch-aaec2000/entry-macro.S delete mode 100644 include/asm-arm/arch-aaec2000/hardware.h delete mode 100644 include/asm-arm/arch-aaec2000/io.h delete mode 100644 include/asm-arm/arch-aaec2000/irqs.h delete mode 100644 include/asm-arm/arch-aaec2000/memory.h delete mode 100644 include/asm-arm/arch-aaec2000/system.h delete mode 100644 include/asm-arm/arch-aaec2000/timex.h delete mode 100644 include/asm-arm/arch-aaec2000/uncompress.h delete mode 100644 include/asm-arm/arch-aaec2000/vmalloc.h delete mode 100644 include/asm-arm/arch-at91/at91_adc.h delete mode 100644 include/asm-arm/arch-at91/at91_aic.h delete mode 100644 include/asm-arm/arch-at91/at91_dbgu.h delete mode 100644 include/asm-arm/arch-at91/at91_mci.h delete mode 100644 include/asm-arm/arch-at91/at91_pio.h delete mode 100644 include/asm-arm/arch-at91/at91_pit.h delete mode 100644 include/asm-arm/arch-at91/at91_pmc.h delete mode 100644 include/asm-arm/arch-at91/at91_rstc.h delete mode 100644 include/asm-arm/arch-at91/at91_rtc.h delete mode 100644 include/asm-arm/arch-at91/at91_rtt.h delete mode 100644 include/asm-arm/arch-at91/at91_shdwc.h delete mode 100644 include/asm-arm/arch-at91/at91_spi.h delete mode 100644 include/asm-arm/arch-at91/at91_ssc.h delete mode 100644 include/asm-arm/arch-at91/at91_st.h delete mode 100644 include/asm-arm/arch-at91/at91_tc.h delete mode 100644 include/asm-arm/arch-at91/at91_twi.h delete mode 100644 include/asm-arm/arch-at91/at91_wdt.h delete mode 100644 include/asm-arm/arch-at91/at91cap9.h delete mode 100644 include/asm-arm/arch-at91/at91cap9_ddrsdr.h delete mode 100644 include/asm-arm/arch-at91/at91cap9_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200_emac.h delete mode 100644 include/asm-arm/arch-at91/at91rm9200_mc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9260.h delete mode 100644 include/asm-arm/arch-at91/at91sam9260_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9261.h delete mode 100644 include/asm-arm/arch-at91/at91sam9261_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9263.h delete mode 100644 include/asm-arm/arch-at91/at91sam9263_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91sam9_sdramc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9_smc.h delete mode 100644 include/asm-arm/arch-at91/at91sam9rl.h delete mode 100644 include/asm-arm/arch-at91/at91sam9rl_matrix.h delete mode 100644 include/asm-arm/arch-at91/at91x40.h delete mode 100644 include/asm-arm/arch-at91/board.h delete mode 100644 include/asm-arm/arch-at91/cpu.h delete mode 100644 include/asm-arm/arch-at91/debug-macro.S delete mode 100644 include/asm-arm/arch-at91/dma.h delete mode 100644 include/asm-arm/arch-at91/entry-macro.S delete mode 100644 include/asm-arm/arch-at91/gpio.h delete mode 100644 include/asm-arm/arch-at91/hardware.h delete mode 100644 include/asm-arm/arch-at91/io.h delete mode 100644 include/asm-arm/arch-at91/irqs.h delete mode 100644 include/asm-arm/arch-at91/memory.h delete mode 100644 include/asm-arm/arch-at91/system.h delete mode 100644 include/asm-arm/arch-at91/timex.h delete mode 100644 include/asm-arm/arch-at91/uncompress.h delete mode 100644 include/asm-arm/arch-at91/vmalloc.h delete mode 100644 include/asm-arm/arch-cl7500/acornfb.h delete mode 100644 include/asm-arm/arch-cl7500/debug-macro.S delete mode 100644 include/asm-arm/arch-cl7500/dma.h delete mode 100644 include/asm-arm/arch-cl7500/entry-macro.S delete mode 100644 include/asm-arm/arch-cl7500/hardware.h delete mode 100644 include/asm-arm/arch-cl7500/io.h delete mode 100644 include/asm-arm/arch-cl7500/irq.h delete mode 100644 include/asm-arm/arch-cl7500/irqs.h delete mode 100644 include/asm-arm/arch-cl7500/memory.h delete mode 100644 include/asm-arm/arch-cl7500/system.h delete mode 100644 include/asm-arm/arch-cl7500/timex.h delete mode 100644 include/asm-arm/arch-cl7500/uncompress.h delete mode 100644 include/asm-arm/arch-cl7500/vmalloc.h delete mode 100644 include/asm-arm/arch-clps711x/autcpu12.h delete mode 100644 include/asm-arm/arch-clps711x/debug-macro.S delete mode 100644 include/asm-arm/arch-clps711x/dma.h delete mode 100644 include/asm-arm/arch-clps711x/entry-macro.S delete mode 100644 include/asm-arm/arch-clps711x/hardware.h delete mode 100644 include/asm-arm/arch-clps711x/io.h delete mode 100644 include/asm-arm/arch-clps711x/irqs.h delete mode 100644 include/asm-arm/arch-clps711x/memory.h delete mode 100644 include/asm-arm/arch-clps711x/syspld.h delete mode 100644 include/asm-arm/arch-clps711x/system.h delete mode 100644 include/asm-arm/arch-clps711x/time.h delete mode 100644 include/asm-arm/arch-clps711x/timex.h delete mode 100644 include/asm-arm/arch-clps711x/uncompress.h delete mode 100644 include/asm-arm/arch-clps711x/vmalloc.h delete mode 100644 include/asm-arm/arch-davinci/clock.h delete mode 100644 include/asm-arm/arch-davinci/common.h delete mode 100644 include/asm-arm/arch-davinci/debug-macro.S delete mode 100644 include/asm-arm/arch-davinci/dma.h delete mode 100644 include/asm-arm/arch-davinci/entry-macro.S delete mode 100644 include/asm-arm/arch-davinci/gpio.h delete mode 100644 include/asm-arm/arch-davinci/hardware.h delete mode 100644 include/asm-arm/arch-davinci/i2c.h delete mode 100644 include/asm-arm/arch-davinci/io.h delete mode 100644 include/asm-arm/arch-davinci/irqs.h delete mode 100644 include/asm-arm/arch-davinci/memory.h delete mode 100644 include/asm-arm/arch-davinci/mux.h delete mode 100644 include/asm-arm/arch-davinci/psc.h delete mode 100644 include/asm-arm/arch-davinci/serial.h delete mode 100644 include/asm-arm/arch-davinci/system.h delete mode 100644 include/asm-arm/arch-davinci/timex.h delete mode 100644 include/asm-arm/arch-davinci/uncompress.h delete mode 100644 include/asm-arm/arch-davinci/vmalloc.h delete mode 100644 include/asm-arm/arch-ebsa110/debug-macro.S delete mode 100644 include/asm-arm/arch-ebsa110/dma.h delete mode 100644 include/asm-arm/arch-ebsa110/entry-macro.S delete mode 100644 include/asm-arm/arch-ebsa110/hardware.h delete mode 100644 include/asm-arm/arch-ebsa110/io.h delete mode 100644 include/asm-arm/arch-ebsa110/irqs.h delete mode 100644 include/asm-arm/arch-ebsa110/memory.h delete mode 100644 include/asm-arm/arch-ebsa110/system.h delete mode 100644 include/asm-arm/arch-ebsa110/timex.h delete mode 100644 include/asm-arm/arch-ebsa110/uncompress.h delete mode 100644 include/asm-arm/arch-ebsa110/vmalloc.h delete mode 100644 include/asm-arm/arch-ebsa285/debug-macro.S delete mode 100644 include/asm-arm/arch-ebsa285/dma.h delete mode 100644 include/asm-arm/arch-ebsa285/entry-macro.S delete mode 100644 include/asm-arm/arch-ebsa285/hardware.h delete mode 100644 include/asm-arm/arch-ebsa285/io.h delete mode 100644 include/asm-arm/arch-ebsa285/irqs.h delete mode 100644 include/asm-arm/arch-ebsa285/memory.h delete mode 100644 include/asm-arm/arch-ebsa285/system.h delete mode 100644 include/asm-arm/arch-ebsa285/timex.h delete mode 100644 include/asm-arm/arch-ebsa285/uncompress.h delete mode 100644 include/asm-arm/arch-ebsa285/vmalloc.h delete mode 100644 include/asm-arm/arch-ep93xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ep93xx/dma.h delete mode 100644 include/asm-arm/arch-ep93xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ep93xx/ep93xx-regs.h delete mode 100644 include/asm-arm/arch-ep93xx/gesbc9312.h delete mode 100644 include/asm-arm/arch-ep93xx/gpio.h delete mode 100644 include/asm-arm/arch-ep93xx/hardware.h delete mode 100644 include/asm-arm/arch-ep93xx/io.h delete mode 100644 include/asm-arm/arch-ep93xx/irqs.h delete mode 100644 include/asm-arm/arch-ep93xx/memory.h delete mode 100644 include/asm-arm/arch-ep93xx/platform.h delete mode 100644 include/asm-arm/arch-ep93xx/system.h delete mode 100644 include/asm-arm/arch-ep93xx/timex.h delete mode 100644 include/asm-arm/arch-ep93xx/ts72xx.h delete mode 100644 include/asm-arm/arch-ep93xx/uncompress.h delete mode 100644 include/asm-arm/arch-ep93xx/vmalloc.h delete mode 100644 include/asm-arm/arch-h720x/boards.h delete mode 100644 include/asm-arm/arch-h720x/debug-macro.S delete mode 100644 include/asm-arm/arch-h720x/dma.h delete mode 100644 include/asm-arm/arch-h720x/entry-macro.S delete mode 100644 include/asm-arm/arch-h720x/h7201-regs.h delete mode 100644 include/asm-arm/arch-h720x/h7202-regs.h delete mode 100644 include/asm-arm/arch-h720x/hardware.h delete mode 100644 include/asm-arm/arch-h720x/io.h delete mode 100644 include/asm-arm/arch-h720x/irqs.h delete mode 100644 include/asm-arm/arch-h720x/memory.h delete mode 100644 include/asm-arm/arch-h720x/system.h delete mode 100644 include/asm-arm/arch-h720x/timex.h delete mode 100644 include/asm-arm/arch-h720x/uncompress.h delete mode 100644 include/asm-arm/arch-h720x/vmalloc.h delete mode 100644 include/asm-arm/arch-imx/debug-macro.S delete mode 100644 include/asm-arm/arch-imx/dma.h delete mode 100644 include/asm-arm/arch-imx/entry-macro.S delete mode 100644 include/asm-arm/arch-imx/gpio.h delete mode 100644 include/asm-arm/arch-imx/hardware.h delete mode 100644 include/asm-arm/arch-imx/imx-dma.h delete mode 100644 include/asm-arm/arch-imx/imx-regs.h delete mode 100644 include/asm-arm/arch-imx/imx-uart.h delete mode 100644 include/asm-arm/arch-imx/imxfb.h delete mode 100644 include/asm-arm/arch-imx/io.h delete mode 100644 include/asm-arm/arch-imx/irqs.h delete mode 100644 include/asm-arm/arch-imx/memory.h delete mode 100644 include/asm-arm/arch-imx/mmc.h delete mode 100644 include/asm-arm/arch-imx/mx1ads.h delete mode 100644 include/asm-arm/arch-imx/spi_imx.h delete mode 100644 include/asm-arm/arch-imx/system.h delete mode 100644 include/asm-arm/arch-imx/timex.h delete mode 100644 include/asm-arm/arch-imx/uncompress.h delete mode 100644 include/asm-arm/arch-imx/vmalloc.h delete mode 100644 include/asm-arm/arch-integrator/bits.h delete mode 100644 include/asm-arm/arch-integrator/cm.h delete mode 100644 include/asm-arm/arch-integrator/debug-macro.S delete mode 100644 include/asm-arm/arch-integrator/dma.h delete mode 100644 include/asm-arm/arch-integrator/entry-macro.S delete mode 100644 include/asm-arm/arch-integrator/hardware.h delete mode 100644 include/asm-arm/arch-integrator/impd1.h delete mode 100644 include/asm-arm/arch-integrator/io.h delete mode 100644 include/asm-arm/arch-integrator/irqs.h delete mode 100644 include/asm-arm/arch-integrator/lm.h delete mode 100644 include/asm-arm/arch-integrator/memory.h delete mode 100644 include/asm-arm/arch-integrator/platform.h delete mode 100644 include/asm-arm/arch-integrator/system.h delete mode 100644 include/asm-arm/arch-integrator/timex.h delete mode 100644 include/asm-arm/arch-integrator/uncompress.h delete mode 100644 include/asm-arm/arch-integrator/vmalloc.h delete mode 100644 include/asm-arm/arch-iop13xx/adma.h delete mode 100644 include/asm-arm/arch-iop13xx/debug-macro.S delete mode 100644 include/asm-arm/arch-iop13xx/dma.h delete mode 100644 include/asm-arm/arch-iop13xx/entry-macro.S delete mode 100644 include/asm-arm/arch-iop13xx/hardware.h delete mode 100644 include/asm-arm/arch-iop13xx/io.h delete mode 100644 include/asm-arm/arch-iop13xx/iop13xx.h delete mode 100644 include/asm-arm/arch-iop13xx/iq81340.h delete mode 100644 include/asm-arm/arch-iop13xx/irqs.h delete mode 100644 include/asm-arm/arch-iop13xx/memory.h delete mode 100644 include/asm-arm/arch-iop13xx/msi.h delete mode 100644 include/asm-arm/arch-iop13xx/pci.h delete mode 100644 include/asm-arm/arch-iop13xx/system.h delete mode 100644 include/asm-arm/arch-iop13xx/time.h delete mode 100644 include/asm-arm/arch-iop13xx/timex.h delete mode 100644 include/asm-arm/arch-iop13xx/uncompress.h delete mode 100644 include/asm-arm/arch-iop13xx/vmalloc.h delete mode 100644 include/asm-arm/arch-iop32x/adma.h delete mode 100644 include/asm-arm/arch-iop32x/debug-macro.S delete mode 100644 include/asm-arm/arch-iop32x/dma.h delete mode 100644 include/asm-arm/arch-iop32x/entry-macro.S delete mode 100644 include/asm-arm/arch-iop32x/glantank.h delete mode 100644 include/asm-arm/arch-iop32x/gpio.h delete mode 100644 include/asm-arm/arch-iop32x/hardware.h delete mode 100644 include/asm-arm/arch-iop32x/io.h delete mode 100644 include/asm-arm/arch-iop32x/iop32x.h delete mode 100644 include/asm-arm/arch-iop32x/iq31244.h delete mode 100644 include/asm-arm/arch-iop32x/iq80321.h delete mode 100644 include/asm-arm/arch-iop32x/irqs.h delete mode 100644 include/asm-arm/arch-iop32x/memory.h delete mode 100644 include/asm-arm/arch-iop32x/n2100.h delete mode 100644 include/asm-arm/arch-iop32x/system.h delete mode 100644 include/asm-arm/arch-iop32x/time.h delete mode 100644 include/asm-arm/arch-iop32x/timex.h delete mode 100644 include/asm-arm/arch-iop32x/uncompress.h delete mode 100644 include/asm-arm/arch-iop32x/vmalloc.h delete mode 100644 include/asm-arm/arch-iop33x/adma.h delete mode 100644 include/asm-arm/arch-iop33x/debug-macro.S delete mode 100644 include/asm-arm/arch-iop33x/dma.h delete mode 100644 include/asm-arm/arch-iop33x/entry-macro.S delete mode 100644 include/asm-arm/arch-iop33x/gpio.h delete mode 100644 include/asm-arm/arch-iop33x/hardware.h delete mode 100644 include/asm-arm/arch-iop33x/io.h delete mode 100644 include/asm-arm/arch-iop33x/iop33x.h delete mode 100644 include/asm-arm/arch-iop33x/iq80331.h delete mode 100644 include/asm-arm/arch-iop33x/iq80332.h delete mode 100644 include/asm-arm/arch-iop33x/irqs.h delete mode 100644 include/asm-arm/arch-iop33x/memory.h delete mode 100644 include/asm-arm/arch-iop33x/system.h delete mode 100644 include/asm-arm/arch-iop33x/time.h delete mode 100644 include/asm-arm/arch-iop33x/timex.h delete mode 100644 include/asm-arm/arch-iop33x/uncompress.h delete mode 100644 include/asm-arm/arch-iop33x/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp2000/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp2000/dma.h delete mode 100644 include/asm-arm/arch-ixp2000/enp2611.h delete mode 100644 include/asm-arm/arch-ixp2000/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp2000/gpio.h delete mode 100644 include/asm-arm/arch-ixp2000/hardware.h delete mode 100644 include/asm-arm/arch-ixp2000/io.h delete mode 100644 include/asm-arm/arch-ixp2000/irqs.h delete mode 100644 include/asm-arm/arch-ixp2000/ixdp2x00.h delete mode 100644 include/asm-arm/arch-ixp2000/ixdp2x01.h delete mode 100644 include/asm-arm/arch-ixp2000/ixp2000-regs.h delete mode 100644 include/asm-arm/arch-ixp2000/memory.h delete mode 100644 include/asm-arm/arch-ixp2000/platform.h delete mode 100644 include/asm-arm/arch-ixp2000/system.h delete mode 100644 include/asm-arm/arch-ixp2000/timex.h delete mode 100644 include/asm-arm/arch-ixp2000/uncompress.h delete mode 100644 include/asm-arm/arch-ixp2000/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp23xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp23xx/dma.h delete mode 100644 include/asm-arm/arch-ixp23xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp23xx/hardware.h delete mode 100644 include/asm-arm/arch-ixp23xx/io.h delete mode 100644 include/asm-arm/arch-ixp23xx/irqs.h delete mode 100644 include/asm-arm/arch-ixp23xx/ixdp2351.h delete mode 100644 include/asm-arm/arch-ixp23xx/ixp23xx.h delete mode 100644 include/asm-arm/arch-ixp23xx/memory.h delete mode 100644 include/asm-arm/arch-ixp23xx/platform.h delete mode 100644 include/asm-arm/arch-ixp23xx/system.h delete mode 100644 include/asm-arm/arch-ixp23xx/time.h delete mode 100644 include/asm-arm/arch-ixp23xx/timex.h delete mode 100644 include/asm-arm/arch-ixp23xx/uncompress.h delete mode 100644 include/asm-arm/arch-ixp23xx/vmalloc.h delete mode 100644 include/asm-arm/arch-ixp4xx/avila.h delete mode 100644 include/asm-arm/arch-ixp4xx/coyote.h delete mode 100644 include/asm-arm/arch-ixp4xx/cpu.h delete mode 100644 include/asm-arm/arch-ixp4xx/debug-macro.S delete mode 100644 include/asm-arm/arch-ixp4xx/dma.h delete mode 100644 include/asm-arm/arch-ixp4xx/dsmg600.h delete mode 100644 include/asm-arm/arch-ixp4xx/entry-macro.S delete mode 100644 include/asm-arm/arch-ixp4xx/fsg.h delete mode 100644 include/asm-arm/arch-ixp4xx/gpio.h delete mode 100644 include/asm-arm/arch-ixp4xx/gtwx5715.h delete mode 100644 include/asm-arm/arch-ixp4xx/hardware.h delete mode 100644 include/asm-arm/arch-ixp4xx/io.h delete mode 100644 include/asm-arm/arch-ixp4xx/irqs.h delete mode 100644 include/asm-arm/arch-ixp4xx/ixdp425.h delete mode 100644 include/asm-arm/arch-ixp4xx/ixp4xx-regs.h delete mode 100644 include/asm-arm/arch-ixp4xx/memory.h delete mode 100644 include/asm-arm/arch-ixp4xx/nas100d.h delete mode 100644 include/asm-arm/arch-ixp4xx/npe.h delete mode 100644 include/asm-arm/arch-ixp4xx/nslu2.h delete mode 100644 include/asm-arm/arch-ixp4xx/platform.h delete mode 100644 include/asm-arm/arch-ixp4xx/prpmc1100.h delete mode 100644 include/asm-arm/arch-ixp4xx/qmgr.h delete mode 100644 include/asm-arm/arch-ixp4xx/system.h delete mode 100644 include/asm-arm/arch-ixp4xx/timex.h delete mode 100644 include/asm-arm/arch-ixp4xx/udc.h delete mode 100644 include/asm-arm/arch-ixp4xx/uncompress.h delete mode 100644 include/asm-arm/arch-ixp4xx/vmalloc.h delete mode 100644 include/asm-arm/arch-kirkwood/debug-macro.S delete mode 100644 include/asm-arm/arch-kirkwood/dma.h delete mode 100644 include/asm-arm/arch-kirkwood/entry-macro.S delete mode 100644 include/asm-arm/arch-kirkwood/hardware.h delete mode 100644 include/asm-arm/arch-kirkwood/io.h delete mode 100644 include/asm-arm/arch-kirkwood/irqs.h delete mode 100644 include/asm-arm/arch-kirkwood/kirkwood.h delete mode 100644 include/asm-arm/arch-kirkwood/memory.h delete mode 100644 include/asm-arm/arch-kirkwood/system.h delete mode 100644 include/asm-arm/arch-kirkwood/timex.h delete mode 100644 include/asm-arm/arch-kirkwood/uncompress.h delete mode 100644 include/asm-arm/arch-kirkwood/vmalloc.h delete mode 100644 include/asm-arm/arch-ks8695/debug-macro.S delete mode 100644 include/asm-arm/arch-ks8695/devices.h delete mode 100644 include/asm-arm/arch-ks8695/dma.h delete mode 100644 include/asm-arm/arch-ks8695/entry-macro.S delete mode 100644 include/asm-arm/arch-ks8695/gpio.h delete mode 100644 include/asm-arm/arch-ks8695/hardware.h delete mode 100644 include/asm-arm/arch-ks8695/io.h delete mode 100644 include/asm-arm/arch-ks8695/irqs.h delete mode 100644 include/asm-arm/arch-ks8695/memory.h delete mode 100644 include/asm-arm/arch-ks8695/regs-gpio.h delete mode 100644 include/asm-arm/arch-ks8695/regs-hpna.h delete mode 100644 include/asm-arm/arch-ks8695/regs-irq.h delete mode 100644 include/asm-arm/arch-ks8695/regs-lan.h delete mode 100644 include/asm-arm/arch-ks8695/regs-mem.h delete mode 100644 include/asm-arm/arch-ks8695/regs-misc.h delete mode 100644 include/asm-arm/arch-ks8695/regs-pci.h delete mode 100644 include/asm-arm/arch-ks8695/regs-switch.h delete mode 100644 include/asm-arm/arch-ks8695/regs-sys.h delete mode 100644 include/asm-arm/arch-ks8695/regs-timer.h delete mode 100644 include/asm-arm/arch-ks8695/regs-uart.h delete mode 100644 include/asm-arm/arch-ks8695/regs-wan.h delete mode 100644 include/asm-arm/arch-ks8695/system.h delete mode 100644 include/asm-arm/arch-ks8695/timex.h delete mode 100644 include/asm-arm/arch-ks8695/uncompress.h delete mode 100644 include/asm-arm/arch-ks8695/vmalloc.h delete mode 100644 include/asm-arm/arch-l7200/aux_reg.h delete mode 100644 include/asm-arm/arch-l7200/debug-macro.S delete mode 100644 include/asm-arm/arch-l7200/dma.h delete mode 100644 include/asm-arm/arch-l7200/entry-macro.S delete mode 100644 include/asm-arm/arch-l7200/gp_timers.h delete mode 100644 include/asm-arm/arch-l7200/gpio.h delete mode 100644 include/asm-arm/arch-l7200/hardware.h delete mode 100644 include/asm-arm/arch-l7200/io.h delete mode 100644 include/asm-arm/arch-l7200/irqs.h delete mode 100644 include/asm-arm/arch-l7200/memory.h delete mode 100644 include/asm-arm/arch-l7200/pmpcon.h delete mode 100644 include/asm-arm/arch-l7200/pmu.h delete mode 100644 include/asm-arm/arch-l7200/serial.h delete mode 100644 include/asm-arm/arch-l7200/serial_l7200.h delete mode 100644 include/asm-arm/arch-l7200/sib.h delete mode 100644 include/asm-arm/arch-l7200/sys-clock.h delete mode 100644 include/asm-arm/arch-l7200/system.h delete mode 100644 include/asm-arm/arch-l7200/time.h delete mode 100644 include/asm-arm/arch-l7200/timex.h delete mode 100644 include/asm-arm/arch-l7200/uncompress.h delete mode 100644 include/asm-arm/arch-l7200/vmalloc.h delete mode 100644 include/asm-arm/arch-lh7a40x/clocks.h delete mode 100644 include/asm-arm/arch-lh7a40x/constants.h delete mode 100644 include/asm-arm/arch-lh7a40x/debug-macro.S delete mode 100644 include/asm-arm/arch-lh7a40x/dma.h delete mode 100644 include/asm-arm/arch-lh7a40x/entry-macro.S delete mode 100644 include/asm-arm/arch-lh7a40x/hardware.h delete mode 100644 include/asm-arm/arch-lh7a40x/io.h delete mode 100644 include/asm-arm/arch-lh7a40x/irqs.h delete mode 100644 include/asm-arm/arch-lh7a40x/memory.h delete mode 100644 include/asm-arm/arch-lh7a40x/registers.h delete mode 100644 include/asm-arm/arch-lh7a40x/ssp.h delete mode 100644 include/asm-arm/arch-lh7a40x/system.h delete mode 100644 include/asm-arm/arch-lh7a40x/timex.h delete mode 100644 include/asm-arm/arch-lh7a40x/uncompress.h delete mode 100644 include/asm-arm/arch-lh7a40x/vmalloc.h delete mode 100644 include/asm-arm/arch-loki/debug-macro.S delete mode 100644 include/asm-arm/arch-loki/dma.h delete mode 100644 include/asm-arm/arch-loki/entry-macro.S delete mode 100644 include/asm-arm/arch-loki/hardware.h delete mode 100644 include/asm-arm/arch-loki/io.h delete mode 100644 include/asm-arm/arch-loki/irqs.h delete mode 100644 include/asm-arm/arch-loki/loki.h delete mode 100644 include/asm-arm/arch-loki/memory.h delete mode 100644 include/asm-arm/arch-loki/system.h delete mode 100644 include/asm-arm/arch-loki/timex.h delete mode 100644 include/asm-arm/arch-loki/uncompress.h delete mode 100644 include/asm-arm/arch-loki/vmalloc.h delete mode 100644 include/asm-arm/arch-msm/board.h delete mode 100644 include/asm-arm/arch-msm/debug-macro.S delete mode 100644 include/asm-arm/arch-msm/dma.h delete mode 100644 include/asm-arm/arch-msm/entry-macro.S delete mode 100644 include/asm-arm/arch-msm/hardware.h delete mode 100644 include/asm-arm/arch-msm/io.h delete mode 100644 include/asm-arm/arch-msm/irqs.h delete mode 100644 include/asm-arm/arch-msm/memory.h delete mode 100644 include/asm-arm/arch-msm/msm_iomap.h delete mode 100644 include/asm-arm/arch-msm/system.h delete mode 100644 include/asm-arm/arch-msm/timex.h delete mode 100644 include/asm-arm/arch-msm/uncompress.h delete mode 100644 include/asm-arm/arch-msm/vmalloc.h delete mode 100644 include/asm-arm/arch-mv78xx0/debug-macro.S delete mode 100644 include/asm-arm/arch-mv78xx0/dma.h delete mode 100644 include/asm-arm/arch-mv78xx0/entry-macro.S delete mode 100644 include/asm-arm/arch-mv78xx0/hardware.h delete mode 100644 include/asm-arm/arch-mv78xx0/io.h delete mode 100644 include/asm-arm/arch-mv78xx0/irqs.h delete mode 100644 include/asm-arm/arch-mv78xx0/memory.h delete mode 100644 include/asm-arm/arch-mv78xx0/mv78xx0.h delete mode 100644 include/asm-arm/arch-mv78xx0/system.h delete mode 100644 include/asm-arm/arch-mv78xx0/timex.h delete mode 100644 include/asm-arm/arch-mv78xx0/uncompress.h delete mode 100644 include/asm-arm/arch-mv78xx0/vmalloc.h delete mode 100644 include/asm-arm/arch-mxc/board-mx27ads.h delete mode 100644 include/asm-arm/arch-mxc/board-mx31ads.h delete mode 100644 include/asm-arm/arch-mxc/board-mx31lite.h delete mode 100644 include/asm-arm/arch-mxc/board-pcm037.h delete mode 100644 include/asm-arm/arch-mxc/board-pcm038.h delete mode 100644 include/asm-arm/arch-mxc/clock.h delete mode 100644 include/asm-arm/arch-mxc/common.h delete mode 100644 include/asm-arm/arch-mxc/debug-macro.S delete mode 100644 include/asm-arm/arch-mxc/dma.h delete mode 100644 include/asm-arm/arch-mxc/entry-macro.S delete mode 100644 include/asm-arm/arch-mxc/gpio.h delete mode 100644 include/asm-arm/arch-mxc/hardware.h delete mode 100644 include/asm-arm/arch-mxc/iim.h delete mode 100644 include/asm-arm/arch-mxc/imx-uart.h delete mode 100644 include/asm-arm/arch-mxc/io.h delete mode 100644 include/asm-arm/arch-mxc/iomux-mx1-mx2.h delete mode 100644 include/asm-arm/arch-mxc/iomux-mx3.h delete mode 100644 include/asm-arm/arch-mxc/irqs.h delete mode 100644 include/asm-arm/arch-mxc/memory.h delete mode 100644 include/asm-arm/arch-mxc/mx27.h delete mode 100644 include/asm-arm/arch-mxc/mx31.h delete mode 100644 include/asm-arm/arch-mxc/mxc.h delete mode 100644 include/asm-arm/arch-mxc/mxc_timer.h delete mode 100644 include/asm-arm/arch-mxc/system.h delete mode 100644 include/asm-arm/arch-mxc/timex.h delete mode 100644 include/asm-arm/arch-mxc/uncompress.h delete mode 100644 include/asm-arm/arch-mxc/vmalloc.h delete mode 100644 include/asm-arm/arch-netx/debug-macro.S delete mode 100644 include/asm-arm/arch-netx/dma.h delete mode 100644 include/asm-arm/arch-netx/entry-macro.S delete mode 100644 include/asm-arm/arch-netx/eth.h delete mode 100644 include/asm-arm/arch-netx/hardware.h delete mode 100644 include/asm-arm/arch-netx/io.h delete mode 100644 include/asm-arm/arch-netx/irqs.h delete mode 100644 include/asm-arm/arch-netx/memory.h delete mode 100644 include/asm-arm/arch-netx/netx-regs.h delete mode 100644 include/asm-arm/arch-netx/param.h delete mode 100644 include/asm-arm/arch-netx/pfifo.h delete mode 100644 include/asm-arm/arch-netx/system.h delete mode 100644 include/asm-arm/arch-netx/timex.h delete mode 100644 include/asm-arm/arch-netx/uncompress.h delete mode 100644 include/asm-arm/arch-netx/vmalloc.h delete mode 100644 include/asm-arm/arch-netx/xc.h delete mode 100644 include/asm-arm/arch-ns9xxx/board.h delete mode 100644 include/asm-arm/arch-ns9xxx/debug-macro.S delete mode 100644 include/asm-arm/arch-ns9xxx/dma.h delete mode 100644 include/asm-arm/arch-ns9xxx/entry-macro.S delete mode 100644 include/asm-arm/arch-ns9xxx/gpio.h delete mode 100644 include/asm-arm/arch-ns9xxx/hardware.h delete mode 100644 include/asm-arm/arch-ns9xxx/io.h delete mode 100644 include/asm-arm/arch-ns9xxx/irqs.h delete mode 100644 include/asm-arm/arch-ns9xxx/memory.h delete mode 100644 include/asm-arm/arch-ns9xxx/module.h delete mode 100644 include/asm-arm/arch-ns9xxx/processor-ns9360.h delete mode 100644 include/asm-arm/arch-ns9xxx/processor.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-bbu.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-mem.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-common.h delete mode 100644 include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h delete mode 100644 include/asm-arm/arch-ns9xxx/system.h delete mode 100644 include/asm-arm/arch-ns9xxx/timex.h delete mode 100644 include/asm-arm/arch-ns9xxx/uncompress.h delete mode 100644 include/asm-arm/arch-ns9xxx/vmalloc.h delete mode 100644 include/asm-arm/arch-omap/aic23.h delete mode 100644 include/asm-arm/arch-omap/blizzard.h delete mode 100644 include/asm-arm/arch-omap/board-2430sdp.h delete mode 100644 include/asm-arm/arch-omap/board-ams-delta.h delete mode 100644 include/asm-arm/arch-omap/board-apollon.h delete mode 100644 include/asm-arm/arch-omap/board-fsample.h delete mode 100644 include/asm-arm/arch-omap/board-h2.h delete mode 100644 include/asm-arm/arch-omap/board-h3.h delete mode 100644 include/asm-arm/arch-omap/board-h4.h delete mode 100644 include/asm-arm/arch-omap/board-innovator.h delete mode 100644 include/asm-arm/arch-omap/board-nokia.h delete mode 100644 include/asm-arm/arch-omap/board-osk.h delete mode 100644 include/asm-arm/arch-omap/board-palmte.h delete mode 100644 include/asm-arm/arch-omap/board-palmtt.h delete mode 100644 include/asm-arm/arch-omap/board-palmz71.h delete mode 100644 include/asm-arm/arch-omap/board-perseus2.h delete mode 100644 include/asm-arm/arch-omap/board-sx1.h delete mode 100644 include/asm-arm/arch-omap/board-voiceblue.h delete mode 100644 include/asm-arm/arch-omap/board.h delete mode 100644 include/asm-arm/arch-omap/clock.h delete mode 100644 include/asm-arm/arch-omap/common.h delete mode 100644 include/asm-arm/arch-omap/control.h delete mode 100644 include/asm-arm/arch-omap/cpu.h delete mode 100644 include/asm-arm/arch-omap/debug-macro.S delete mode 100644 include/asm-arm/arch-omap/dma.h delete mode 100644 include/asm-arm/arch-omap/dmtimer.h delete mode 100644 include/asm-arm/arch-omap/dsp_common.h delete mode 100644 include/asm-arm/arch-omap/eac.h delete mode 100644 include/asm-arm/arch-omap/entry-macro.S delete mode 100644 include/asm-arm/arch-omap/fpga.h delete mode 100644 include/asm-arm/arch-omap/gpio-switch.h delete mode 100644 include/asm-arm/arch-omap/gpio.h delete mode 100644 include/asm-arm/arch-omap/gpioexpander.h delete mode 100644 include/asm-arm/arch-omap/gpmc.h delete mode 100644 include/asm-arm/arch-omap/hardware.h delete mode 100644 include/asm-arm/arch-omap/hwa742.h delete mode 100644 include/asm-arm/arch-omap/io.h delete mode 100644 include/asm-arm/arch-omap/irda.h delete mode 100644 include/asm-arm/arch-omap/irqs.h delete mode 100644 include/asm-arm/arch-omap/keypad.h delete mode 100644 include/asm-arm/arch-omap/lcd_mipid.h delete mode 100644 include/asm-arm/arch-omap/led.h delete mode 100644 include/asm-arm/arch-omap/mailbox.h delete mode 100644 include/asm-arm/arch-omap/mcbsp.h delete mode 100644 include/asm-arm/arch-omap/mcspi.h delete mode 100644 include/asm-arm/arch-omap/memory.h delete mode 100644 include/asm-arm/arch-omap/menelaus.h delete mode 100644 include/asm-arm/arch-omap/mmc.h delete mode 100644 include/asm-arm/arch-omap/mtd-xip.h delete mode 100644 include/asm-arm/arch-omap/mux.h delete mode 100644 include/asm-arm/arch-omap/nand.h delete mode 100644 include/asm-arm/arch-omap/omap-alsa.h delete mode 100644 include/asm-arm/arch-omap/omap1510.h delete mode 100644 include/asm-arm/arch-omap/omap16xx.h delete mode 100644 include/asm-arm/arch-omap/omap24xx.h delete mode 100644 include/asm-arm/arch-omap/omap34xx.h delete mode 100644 include/asm-arm/arch-omap/omap730.h delete mode 100644 include/asm-arm/arch-omap/omapfb.h delete mode 100644 include/asm-arm/arch-omap/onenand.h delete mode 100644 include/asm-arm/arch-omap/param.h delete mode 100644 include/asm-arm/arch-omap/pm.h delete mode 100644 include/asm-arm/arch-omap/prcm.h delete mode 100644 include/asm-arm/arch-omap/sdrc.h delete mode 100644 include/asm-arm/arch-omap/serial.h delete mode 100644 include/asm-arm/arch-omap/sram.h delete mode 100644 include/asm-arm/arch-omap/system.h delete mode 100644 include/asm-arm/arch-omap/tc.h delete mode 100644 include/asm-arm/arch-omap/timex.h delete mode 100644 include/asm-arm/arch-omap/uncompress.h delete mode 100644 include/asm-arm/arch-omap/usb.h delete mode 100644 include/asm-arm/arch-omap/vmalloc.h delete mode 100644 include/asm-arm/arch-orion5x/debug-macro.S delete mode 100644 include/asm-arm/arch-orion5x/dma.h delete mode 100644 include/asm-arm/arch-orion5x/entry-macro.S delete mode 100644 include/asm-arm/arch-orion5x/gpio.h delete mode 100644 include/asm-arm/arch-orion5x/hardware.h delete mode 100644 include/asm-arm/arch-orion5x/io.h delete mode 100644 include/asm-arm/arch-orion5x/irqs.h delete mode 100644 include/asm-arm/arch-orion5x/memory.h delete mode 100644 include/asm-arm/arch-orion5x/orion5x.h delete mode 100644 include/asm-arm/arch-orion5x/system.h delete mode 100644 include/asm-arm/arch-orion5x/timex.h delete mode 100644 include/asm-arm/arch-orion5x/uncompress.h delete mode 100644 include/asm-arm/arch-orion5x/vmalloc.h delete mode 100644 include/asm-arm/arch-pnx4008/clock.h delete mode 100644 include/asm-arm/arch-pnx4008/debug-macro.S delete mode 100644 include/asm-arm/arch-pnx4008/dma.h delete mode 100644 include/asm-arm/arch-pnx4008/entry-macro.S delete mode 100644 include/asm-arm/arch-pnx4008/gpio.h delete mode 100644 include/asm-arm/arch-pnx4008/hardware.h delete mode 100644 include/asm-arm/arch-pnx4008/i2c.h delete mode 100644 include/asm-arm/arch-pnx4008/io.h delete mode 100644 include/asm-arm/arch-pnx4008/irq.h delete mode 100644 include/asm-arm/arch-pnx4008/irqs.h delete mode 100644 include/asm-arm/arch-pnx4008/memory.h delete mode 100644 include/asm-arm/arch-pnx4008/param.h delete mode 100644 include/asm-arm/arch-pnx4008/platform.h delete mode 100644 include/asm-arm/arch-pnx4008/pm.h delete mode 100644 include/asm-arm/arch-pnx4008/system.h delete mode 100644 include/asm-arm/arch-pnx4008/timex.h delete mode 100644 include/asm-arm/arch-pnx4008/uncompress.h delete mode 100644 include/asm-arm/arch-pnx4008/vmalloc.h delete mode 100644 include/asm-arm/arch-pxa/akita.h delete mode 100644 include/asm-arm/arch-pxa/audio.h delete mode 100644 include/asm-arm/arch-pxa/bitfield.h delete mode 100644 include/asm-arm/arch-pxa/camera.h delete mode 100644 include/asm-arm/arch-pxa/colibri.h delete mode 100644 include/asm-arm/arch-pxa/corgi.h delete mode 100644 include/asm-arm/arch-pxa/debug-macro.S delete mode 100644 include/asm-arm/arch-pxa/dma.h delete mode 100644 include/asm-arm/arch-pxa/entry-macro.S delete mode 100644 include/asm-arm/arch-pxa/eseries-gpio.h delete mode 100644 include/asm-arm/arch-pxa/eseries-irq.h delete mode 100644 include/asm-arm/arch-pxa/gpio.h delete mode 100644 include/asm-arm/arch-pxa/gumstix.h delete mode 100644 include/asm-arm/arch-pxa/hardware.h delete mode 100644 include/asm-arm/arch-pxa/i2c.h delete mode 100644 include/asm-arm/arch-pxa/idp.h delete mode 100644 include/asm-arm/arch-pxa/io.h delete mode 100644 include/asm-arm/arch-pxa/irda.h delete mode 100644 include/asm-arm/arch-pxa/irqs.h delete mode 100644 include/asm-arm/arch-pxa/littleton.h delete mode 100644 include/asm-arm/arch-pxa/lpd270.h delete mode 100644 include/asm-arm/arch-pxa/lubbock.h delete mode 100644 include/asm-arm/arch-pxa/magician.h delete mode 100644 include/asm-arm/arch-pxa/mainstone.h delete mode 100644 include/asm-arm/arch-pxa/memory.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa25x.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa27x.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa2xx.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa300.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa320.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa3xx.h delete mode 100644 include/asm-arm/arch-pxa/mfp-pxa930.h delete mode 100644 include/asm-arm/arch-pxa/mfp.h delete mode 100644 include/asm-arm/arch-pxa/mmc.h delete mode 100644 include/asm-arm/arch-pxa/mtd-xip.h delete mode 100644 include/asm-arm/arch-pxa/ohci.h delete mode 100644 include/asm-arm/arch-pxa/palmtx.h delete mode 100644 include/asm-arm/arch-pxa/pcm027.h delete mode 100644 include/asm-arm/arch-pxa/pcm990_baseboard.h delete mode 100644 include/asm-arm/arch-pxa/pm.h delete mode 100644 include/asm-arm/arch-pxa/poodle.h delete mode 100644 include/asm-arm/arch-pxa/pxa-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa25x-udc.h delete mode 100644 include/asm-arm/arch-pxa/pxa27x-udc.h delete mode 100644 include/asm-arm/arch-pxa/pxa27x_keypad.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx-gpio.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa2xx_spi.h delete mode 100644 include/asm-arm/arch-pxa/pxa3xx-regs.h delete mode 100644 include/asm-arm/arch-pxa/pxa3xx_nand.h delete mode 100644 include/asm-arm/arch-pxa/pxafb.h delete mode 100644 include/asm-arm/arch-pxa/regs-lcd.h delete mode 100644 include/asm-arm/arch-pxa/regs-ssp.h delete mode 100644 include/asm-arm/arch-pxa/sharpsl.h delete mode 100644 include/asm-arm/arch-pxa/spitz.h delete mode 100644 include/asm-arm/arch-pxa/ssp.h delete mode 100644 include/asm-arm/arch-pxa/system.h delete mode 100644 include/asm-arm/arch-pxa/timex.h delete mode 100644 include/asm-arm/arch-pxa/tosa.h delete mode 100644 include/asm-arm/arch-pxa/tosa_bt.h delete mode 100644 include/asm-arm/arch-pxa/trizeps4.h delete mode 100644 include/asm-arm/arch-pxa/udc.h delete mode 100644 include/asm-arm/arch-pxa/uncompress.h delete mode 100644 include/asm-arm/arch-pxa/vmalloc.h delete mode 100644 include/asm-arm/arch-pxa/zylonite.h delete mode 100644 include/asm-arm/arch-realview/board-eb.h delete mode 100644 include/asm-arm/arch-realview/board-pb1176.h delete mode 100644 include/asm-arm/arch-realview/board-pb11mp.h delete mode 100644 include/asm-arm/arch-realview/debug-macro.S delete mode 100644 include/asm-arm/arch-realview/dma.h delete mode 100644 include/asm-arm/arch-realview/entry-macro.S delete mode 100644 include/asm-arm/arch-realview/hardware.h delete mode 100644 include/asm-arm/arch-realview/io.h delete mode 100644 include/asm-arm/arch-realview/irqs.h delete mode 100644 include/asm-arm/arch-realview/memory.h delete mode 100644 include/asm-arm/arch-realview/platform.h delete mode 100644 include/asm-arm/arch-realview/scu.h delete mode 100644 include/asm-arm/arch-realview/smp.h delete mode 100644 include/asm-arm/arch-realview/system.h delete mode 100644 include/asm-arm/arch-realview/timex.h delete mode 100644 include/asm-arm/arch-realview/uncompress.h delete mode 100644 include/asm-arm/arch-realview/vmalloc.h delete mode 100644 include/asm-arm/arch-rpc/acornfb.h delete mode 100644 include/asm-arm/arch-rpc/debug-macro.S delete mode 100644 include/asm-arm/arch-rpc/dma.h delete mode 100644 include/asm-arm/arch-rpc/entry-macro.S delete mode 100644 include/asm-arm/arch-rpc/hardware.h delete mode 100644 include/asm-arm/arch-rpc/io.h delete mode 100644 include/asm-arm/arch-rpc/irqs.h delete mode 100644 include/asm-arm/arch-rpc/memory.h delete mode 100644 include/asm-arm/arch-rpc/system.h delete mode 100644 include/asm-arm/arch-rpc/timex.h delete mode 100644 include/asm-arm/arch-rpc/uncompress.h delete mode 100644 include/asm-arm/arch-rpc/vmalloc.h delete mode 100644 include/asm-arm/arch-s3c2400/map.h delete mode 100644 include/asm-arm/arch-s3c2400/memory.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/anubis-map.h delete mode 100644 include/asm-arm/arch-s3c2410/audio.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-map.h delete mode 100644 include/asm-arm/arch-s3c2410/bast-pmu.h delete mode 100644 include/asm-arm/arch-s3c2410/debug-macro.S delete mode 100644 include/asm-arm/arch-s3c2410/dma.h delete mode 100644 include/asm-arm/arch-s3c2410/entry-macro.S delete mode 100644 include/asm-arm/arch-s3c2410/fb.h delete mode 100644 include/asm-arm/arch-s3c2410/gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/h1940-latch.h delete mode 100644 include/asm-arm/arch-s3c2410/h1940.h delete mode 100644 include/asm-arm/arch-s3c2410/hardware.h delete mode 100644 include/asm-arm/arch-s3c2410/idle.h delete mode 100644 include/asm-arm/arch-s3c2410/io.h delete mode 100644 include/asm-arm/arch-s3c2410/irqs.h delete mode 100644 include/asm-arm/arch-s3c2410/leds-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/map.h delete mode 100644 include/asm-arm/arch-s3c2410/memory.h delete mode 100644 include/asm-arm/arch-s3c2410/osiris-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/osiris-map.h delete mode 100644 include/asm-arm/arch-s3c2410/otom-map.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-clock.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-dsc.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-gpioj.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-lcd.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-mem.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-power.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2412.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h delete mode 100644 include/asm-arm/arch-s3c2410/regs-sdi.h delete mode 100644 include/asm-arm/arch-s3c2410/reset.h delete mode 100644 include/asm-arm/arch-s3c2410/spi-gpio.h delete mode 100644 include/asm-arm/arch-s3c2410/spi.h delete mode 100644 include/asm-arm/arch-s3c2410/system-reset.h delete mode 100644 include/asm-arm/arch-s3c2410/system.h delete mode 100644 include/asm-arm/arch-s3c2410/timex.h delete mode 100644 include/asm-arm/arch-s3c2410/uncompress.h delete mode 100644 include/asm-arm/arch-s3c2410/usb-control.h delete mode 100644 include/asm-arm/arch-s3c2410/vmalloc.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-cpld.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-irq.h delete mode 100644 include/asm-arm/arch-s3c2410/vr1000-map.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1100.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1101.h delete mode 100644 include/asm-arm/arch-sa1100/SA-1111.h delete mode 100644 include/asm-arm/arch-sa1100/assabet.h delete mode 100644 include/asm-arm/arch-sa1100/badge4.h delete mode 100644 include/asm-arm/arch-sa1100/bitfield.h delete mode 100644 include/asm-arm/arch-sa1100/cerf.h delete mode 100644 include/asm-arm/arch-sa1100/collie.h delete mode 100644 include/asm-arm/arch-sa1100/debug-macro.S delete mode 100644 include/asm-arm/arch-sa1100/dma.h delete mode 100644 include/asm-arm/arch-sa1100/entry-macro.S delete mode 100644 include/asm-arm/arch-sa1100/gpio.h delete mode 100644 include/asm-arm/arch-sa1100/h3600.h delete mode 100644 include/asm-arm/arch-sa1100/h3600_gpio.h delete mode 100644 include/asm-arm/arch-sa1100/hardware.h delete mode 100644 include/asm-arm/arch-sa1100/ide.h delete mode 100644 include/asm-arm/arch-sa1100/io.h delete mode 100644 include/asm-arm/arch-sa1100/irqs.h delete mode 100644 include/asm-arm/arch-sa1100/jornada720.h delete mode 100644 include/asm-arm/arch-sa1100/lart.h delete mode 100644 include/asm-arm/arch-sa1100/mcp.h delete mode 100644 include/asm-arm/arch-sa1100/memory.h delete mode 100644 include/asm-arm/arch-sa1100/mtd-xip.h delete mode 100644 include/asm-arm/arch-sa1100/neponset.h delete mode 100644 include/asm-arm/arch-sa1100/shannon.h delete mode 100644 include/asm-arm/arch-sa1100/simpad.h delete mode 100644 include/asm-arm/arch-sa1100/system.h delete mode 100644 include/asm-arm/arch-sa1100/timex.h delete mode 100644 include/asm-arm/arch-sa1100/uncompress.h delete mode 100644 include/asm-arm/arch-sa1100/vmalloc.h delete mode 100644 include/asm-arm/arch-shark/debug-macro.S delete mode 100644 include/asm-arm/arch-shark/dma.h delete mode 100644 include/asm-arm/arch-shark/entry-macro.S delete mode 100644 include/asm-arm/arch-shark/hardware.h delete mode 100644 include/asm-arm/arch-shark/io.h delete mode 100644 include/asm-arm/arch-shark/irqs.h delete mode 100644 include/asm-arm/arch-shark/memory.h delete mode 100644 include/asm-arm/arch-shark/system.h delete mode 100644 include/asm-arm/arch-shark/timex.h delete mode 100644 include/asm-arm/arch-shark/uncompress.h delete mode 100644 include/asm-arm/arch-shark/vmalloc.h delete mode 100644 include/asm-arm/arch-versatile/debug-macro.S delete mode 100644 include/asm-arm/arch-versatile/dma.h delete mode 100644 include/asm-arm/arch-versatile/entry-macro.S delete mode 100644 include/asm-arm/arch-versatile/hardware.h delete mode 100644 include/asm-arm/arch-versatile/io.h delete mode 100644 include/asm-arm/arch-versatile/irqs.h delete mode 100644 include/asm-arm/arch-versatile/memory.h delete mode 100644 include/asm-arm/arch-versatile/platform.h delete mode 100644 include/asm-arm/arch-versatile/system.h delete mode 100644 include/asm-arm/arch-versatile/timex.h delete mode 100644 include/asm-arm/arch-versatile/uncompress.h delete mode 100644 include/asm-arm/arch-versatile/vmalloc.h (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h deleted file mode 100644 index a6d1ee0980f2..000000000000 --- a/include/asm-arm/arch-aaec2000/aaec2000.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/aaec2000.h - * - * AAEC-2000 registers definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAEC2000_H -#define __ASM_ARCH_AAEC2000_H - -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not this file -#endif /* __ASM_ARCH_HARDWARE_H */ - -/* Chip selects */ -#define AAEC_CS0 0x00000000 -#define AAEC_CS1 0x10000000 -#define AAEC_CS2 0x20000000 -#define AAEC_CS3 0x30000000 - -/* Flash */ -#define AAEC_FLASH_BASE AAEC_CS0 -#define AAEC_FLASH_SIZE SZ_64M - -/* Interrupt controller */ -#define IRQ_BASE __REG(0x80000500) -#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ -#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */ -#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */ -#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */ - -/* UART 1 */ -#define UART1_BASE __REG(0x80000600) -#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */ -#define UART1_LCR __REG(0x80000604) /* Link Control Register */ -#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */ -#define UART1_CR __REG(0x8000060c) /* Control Register */ -#define UART1_SR __REG(0x80000610) /* Status Register */ -#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */ -#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */ -#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */ - -/* UART 2 */ -#define UART2_BASE __REG(0x80000700) -#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */ -#define UART2_LCR __REG(0x80000704) /* Link Control Register */ -#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */ -#define UART2_CR __REG(0x8000070c) /* Control Register */ -#define UART2_SR __REG(0x80000710) /* Status Register */ -#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */ -#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */ -#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */ - -/* UART 3 */ -#define UART3_BASE __REG(0x80000800) -#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */ -#define UART3_LCR __REG(0x80000804) /* Link Control Register */ -#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */ -#define UART3_CR __REG(0x8000080c) /* Control Register */ -#define UART3_SR __REG(0x80000810) /* Status Register */ -#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */ -#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */ -#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */ - -/* These are used in some places */ -#define _UART1_BASE __PREG(UART1_BASE) -#define _UART2_BASE __PREG(UART2_BASE) -#define _UART3_BASE __PREG(UART3_BASE) - -/* UART Registers Offsets */ -#define UART_DR 0x00 -#define UART_LCR 0x04 -#define UART_BRCR 0x08 -#define UART_CR 0x0c -#define UART_SR 0x10 -#define UART_INT 0x14 -#define UART_INTM 0x18 -#define UART_INTRES 0x1c - -/* UART_LCR Bitmask */ -#define UART_LCR_BRK (1 << 0) /* Send Break */ -#define UART_LCR_PEN (1 << 1) /* Parity Enable */ -#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */ -#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */ -#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */ -#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */ -#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */ -#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */ -#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */ - -/* UART_CR Bitmask */ -#define UART_CR_EN (1 << 0) /* UART Enable */ -#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */ -#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */ -#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */ -#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */ -#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */ -#define UART_CR_LOOP (1 << 6) /* Loopback Mode */ - -/* UART_SR Bitmask */ -#define UART_SR_CTS (1 << 0) /* Clear To Send Status */ -#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */ -#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */ -#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */ -#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */ -#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */ -#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */ -#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */ - -/* UART_INT Bitmask */ -#define UART_INT_RIS (1 << 0) /* Rx Interrupt */ -#define UART_INT_TIS (1 << 1) /* Tx Interrupt */ -#define UART_INT_MIS (1 << 2) /* Modem Interrupt */ -#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */ - -/* Timer 1 */ -#define TIMER1_BASE __REG(0x80000c00) -#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */ -#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */ -#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */ -#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */ - -/* Timer 2 */ -#define TIMER2_BASE __REG(0x80000d00) -#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */ -#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */ -#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */ -#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */ - -/* Timer 3 */ -#define TIMER3_BASE __REG(0x80000e00) -#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */ -#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */ -#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */ -#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */ - -/* Timer Control register bits */ -#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */ -#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */ -#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */ -#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */ -#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */ - -/* Power and State Control */ -#define POWER_BASE __REG(0x80000400) -#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */ -#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */ -#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */ -#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */ -#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */ -#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */ -#define POWER_TEOI __REG(0x80000418) /* Tick EoI */ -#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ -#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ - -/* GPIO Registers */ -#define AAEC_GPIO_PHYS 0x80000e00 - -#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00) -#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04) -#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08) -#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c) -#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10) -#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14) -#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18) -#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c) -#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20) -#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24) -#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28) -#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c) -#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30) -#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34) -#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38) -#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c) -#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40) -#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44) -#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48) -#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c) -#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50) -#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54) -#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58) -#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c) -#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60) -#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64) -#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68) -#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c) -#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70) -#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74) -#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78) -#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c) -#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80) -#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84) - -#define AAEC_GPIO_PINMUX_PE0CON (1 << 0) -#define AAEC_GPIO_PINMUX_PD0CON (1 << 1) -#define AAEC_GPIO_PINMUX_CODECON (1 << 2) -#define AAEC_GPIO_PINMUX_UART3CON (1 << 3) - -/* LCD Controller */ -#define AAEC_CLCD_PHYS 0x80003000 - -#endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h deleted file mode 100644 index bc76d2badb91..000000000000 --- a/include/asm-arm/arch-aaec2000/aaed2000.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/aaed2000.h - * - * AAED-2000 specific bits definition - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_AAED2000_H -#define __ASM_ARCH_AAED2000_H - -/* External GPIOs. */ - -#define EXT_GPIO_PBASE AAEC_CS3 -#define EXT_GPIO_VBASE 0xf8100000 -#define EXT_GPIO_LENGTH 0x00001000 - -#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE) -#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE) - -#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x))) -#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x))) - -#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE) - -#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */ -#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */ -#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */ -#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */ -#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */ -#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */ -#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */ -#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */ - - -#endif /* __ARM_ARCH_AAED2000_H */ diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S deleted file mode 100644 index 7b1fce021d8a..000000000000 --- a/include/asm-arm/arch-aaec2000/debug-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/include/asm-arm/arch-aaec2000/debug-macro.S - * - * Debugging macro include header - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "hardware.h" - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical - movne \rx, #io_p2v(0x80000000) @ virtual - orr \rx, \rx, #0x00000800 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 7) - beq 1002b - .endm - - .macro waituart,rd,rx -#if 0 -1001: ldr \rd, [\rx, #0x10] - tst \rd, #(1 << 5) - beq 1001b -#endif - .endm diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h deleted file mode 100644 index e100b1e526fe..000000000000 --- a/include/asm-arm/arch-aaec2000/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/dma.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S deleted file mode 100644 index 83fdf68f6b7c..000000000000 --- a/include/asm-arm/arch-aaec2000/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/entry-macro.S - * - * Low-level IRQ helper for aaec-2000 based platforms - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xf8000000 - add r4, r4, #0x00000500 - mov \base, r4 - ldr \irqstat, [\base, #0] - cmp \irqstat, #0 - bne 1001f - ldr \irqnr, =NR_IRQS+1 - b 1003f -1001: mov \irqnr, #0 -1002: ands \tmp, \irqstat, #1 - mov \irqstat, \irqstat, LSR #1 - add \irqnr, \irqnr, #1 - beq 1002b - sub \irqnr, \irqnr, #1 -1003: - .endm diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h deleted file mode 100644 index 153506fd06ed..000000000000 --- a/include/asm-arm/arch-aaec2000/hardware.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/hardware.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* The kernel is loaded at physical address 0xf8000000. - * We map the IO space a bit after - */ -#define PIO_APB_BASE 0x80000000 -#define VIO_APB_BASE 0xf8000000 -#define IO_APB_LENGTH 0x2000 -#define PIO_AHB_BASE 0x80002000 -#define VIO_AHB_BASE 0xf8002000 -#define IO_AHB_LENGTH 0x2000 - -#define VIO_BASE VIO_APB_BASE -#define PIO_BASE PIO_APB_BASE - -#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) -#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) - -#ifndef __ASSEMBLY__ - -#include - -/* FIXME: Is it needed to optimize this a la pxa ?? */ -#define __REG(x) (*((volatile u32 *)io_p2v(x))) -#define __PREG(x) (io_v2p((u32)&(x))) - -#else /* __ASSEMBLY__ */ - -#define __REG(x) io_p2v(x) -#define __PREG(x) io_v2p(x) - -#endif - -#include "aaec2000.h" - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h deleted file mode 100644 index bc2364ab8752..000000000000 --- a/include/asm-arm/arch-aaec2000/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h deleted file mode 100644 index de252220e806..000000000000 --- a/include/asm-arm/arch-aaec2000/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/irqs.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ -#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ -#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ -#define INT_MV_FIQ 3 /* Media Changed Interrupt */ -#define INT_SC 4 /* Sound Codec Interrupt */ -#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ -#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ -#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ -#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ -#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ -#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ -#define INT_TICK 11 /* 64Hz Tick Interrupt */ -#define INT_UART1 12 /* UART1 Interrupt */ -#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ -#define INT_LCD 14 /* LCD Interrupt */ -#define INT_SSI 15 /* SSI End of Transfer Interrupt */ -#define INT_UART3 16 /* UART3 Interrupt */ -#define INT_SCI 17 /* SCI Interrupt */ -#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ -#define INT_MMC 19 /* MMC Interrupt */ -#define INT_USB 20 /* USB Interrupt */ -#define INT_DMA 21 /* DMA Interrupt */ -#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ -#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ -#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ -#define INT_BMI 27 /* BMI Interrupt */ - -#define NR_IRQS (INT_BMI + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h deleted file mode 100644 index 9eceb4148922..000000000000 --- a/include/asm-arm/arch-aaec2000/memory.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/memory.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -#define PHYS_OFFSET UL(0xf0000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * The nodes are the followings: - * - * node 0: 0xf000.0000 - 0xf3ff.ffff - * node 1: 0xf400.0000 - 0xf7ff.ffff - * node 2: 0xf800.0000 - 0xfbff.ffff - * node 3: 0xfc00.0000 - 0xffff.ffff - */ -#define NODE_MEM_SIZE_BITS 26 - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h deleted file mode 100644 index 08de97b407a8..000000000000 --- a/include/asm-arm/arch-aaec2000/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaed2000/system.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h deleted file mode 100644 index f5708b38fb7f..000000000000 --- a/include/asm-arm/arch-aaec2000/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/timex.h - * - * AAEC-2000 Architecture timex specification - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 508000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h deleted file mode 100644 index 300f4bf3bc74..000000000000 --- a/include/asm-arm/arch-aaec2000/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/uncompress.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include "hardware.h" - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -static void putc(int c) -{ - unsigned long serial_port; - do { - serial_port = _UART3_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART1_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - serial_port = _UART2_BASE; - if (UART(UART_CR) & UART_CR_EN) break; - return; - } while (0); - - /* wait for space in the UART's transmitter */ - while ((UART(UART_SR) & UART_SR_TxFF)) - barrier(); - - /* send the character out. */ - UART(UART_DR) = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h deleted file mode 100644 index ecb991e2e4ff..000000000000 --- a/include/asm-arm/arch-aaec2000/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-arm/arch-aaec2000/vmalloc.h - * - * Copyright (c) 2005 Nicolas Bellido Y Ortega - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h deleted file mode 100644 index 6d71ea2637b1..000000000000 --- a/include/asm-arm/arch-at91/at91_adc.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#endif diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h deleted file mode 100644 index df44c12a12d4..000000000000 --- a/include/asm-arm/arch-at91/at91_aic.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_aic.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Advanced Interrupt Controller (AIC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_AIC_H -#define AT91_AIC_H - -#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */ -#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ -#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ -#define AT91_AIC_SRCTYPE_LOW (0 << 5) -#define AT91_AIC_SRCTYPE_FALLING (1 << 5) -#define AT91_AIC_SRCTYPE_HIGH (2 << 5) -#define AT91_AIC_SRCTYPE_RISING (3 << 5) - -#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ -#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */ -#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */ -#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */ -#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ - -#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */ -#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */ -#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */ -#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ -#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ - -#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */ -#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */ -#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */ -#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */ -#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */ -#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */ -#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */ -#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ -#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ - -#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */ -#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */ -#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h deleted file mode 100644 index 8019ffd0ad3b..000000000000 --- a/include/asm-arm/arch-at91/at91_dbgu.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_dbgu.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Debug Unit (DBGU) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_DBGU_H -#define AT91_DBGU_H - -#ifdef AT91_DBGU -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ -#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ - -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ -#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ - -#endif /* AT91_DBGU */ - -/* - * Some AT91 parts that don't have full DEBUG units still support the ID - * and extensions register. - */ -#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */ -#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */ -#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */ -#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */ -#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */ -#define AT91_CIDR_SRAMSIZ_1K (1 << 16) -#define AT91_CIDR_SRAMSIZ_2K (2 << 16) -#define AT91_CIDR_SRAMSIZ_112K (4 << 16) -#define AT91_CIDR_SRAMSIZ_4K (5 << 16) -#define AT91_CIDR_SRAMSIZ_80K (6 << 16) -#define AT91_CIDR_SRAMSIZ_160K (7 << 16) -#define AT91_CIDR_SRAMSIZ_8K (8 << 16) -#define AT91_CIDR_SRAMSIZ_16K (9 << 16) -#define AT91_CIDR_SRAMSIZ_32K (10 << 16) -#define AT91_CIDR_SRAMSIZ_64K (11 << 16) -#define AT91_CIDR_SRAMSIZ_128K (12 << 16) -#define AT91_CIDR_SRAMSIZ_256K (13 << 16) -#define AT91_CIDR_SRAMSIZ_96K (14 << 16) -#define AT91_CIDR_SRAMSIZ_512K (15 << 16) -#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */ -#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */ -#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h deleted file mode 100644 index 400ec10014b4..000000000000 --- a/include/asm-arm/arch-at91/at91_mci.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_mci.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision F. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_MCI_H -#define AT91_MCI_H - -#define AT91_MCI_CR 0x00 /* Control Register */ -#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ -#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ -#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ -#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ -#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_MCI_MR 0x04 /* Mode Register */ -#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ -#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ -#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ -#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ -#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ -#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ - -#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ -#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ -#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ -#define AT91_MCI_DTOMUL_1 (0 << 4) -#define AT91_MCI_DTOMUL_16 (1 << 4) -#define AT91_MCI_DTOMUL_128 (2 << 4) -#define AT91_MCI_DTOMUL_256 (3 << 4) -#define AT91_MCI_DTOMUL_1K (4 << 4) -#define AT91_MCI_DTOMUL_4K (5 << 4) -#define AT91_MCI_DTOMUL_64K (6 << 4) -#define AT91_MCI_DTOMUL_1M (7 << 4) - -#define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ - -#define AT91_MCI_ARGR 0x10 /* Argument Register */ - -#define AT91_MCI_CMDR 0x14 /* Command Register */ -#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ -#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ -#define AT91_MCI_RSPTYP_NONE (0 << 6) -#define AT91_MCI_RSPTYP_48 (1 << 6) -#define AT91_MCI_RSPTYP_136 (2 << 6) -#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ -#define AT91_MCI_SPCMD_NONE (0 << 8) -#define AT91_MCI_SPCMD_INIT (1 << 8) -#define AT91_MCI_SPCMD_SYNC (2 << 8) -#define AT91_MCI_SPCMD_ICMD (4 << 8) -#define AT91_MCI_SPCMD_IRESP (5 << 8) -#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ -#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ -#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ -#define AT91_MCI_TRCMD_NONE (0 << 16) -#define AT91_MCI_TRCMD_START (1 << 16) -#define AT91_MCI_TRCMD_STOP (2 << 16) -#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ -#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ -#define AT91_MCI_TRTYP_BLOCK (0 << 19) -#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) -#define AT91_MCI_TRTYP_STREAM (2 << 19) - -#define AT91_MCI_BLKR 0x18 /* Block Register */ -#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ - -#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ -#define AT91_MCR_RDR 0x30 /* Receive Data Register */ -#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ - -#define AT91_MCI_SR 0x40 /* Status Register */ -#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ -#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ -#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ -#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ -#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ -#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ -#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ -#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ -#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ -#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ -#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */ -#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ -#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ -#define AT91_MCI_OVRE (1 << 30) /* Overrun */ -#define AT91_MCI_UNRE (1 << 31) /* Underrun */ - -#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ -#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h deleted file mode 100644 index 84c3866d309f..000000000000 --- a/include/asm-arm/arch-at91/at91_pio.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pio.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Parallel I/O Controller (PIO) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIO_H -#define AT91_PIO_H - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h deleted file mode 100644 index 5026325a5ae4..000000000000 --- a/include/asm-arm/arch-at91/at91_pit.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pit.h - * - * Periodic Interval Timer (PIT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIT_H -#define AT91_PIT_H - -#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ -#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ -#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ -#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ - -#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ -#define AT91_PIT_PITS (1 << 0) /* Timer Status */ - -#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ -#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ -#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ -#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h deleted file mode 100644 index 2001e81f2267..000000000000 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_pmc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Power Management Controller (PMC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PMC_H -#define AT91_PMC_H - -#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ -#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ - -#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ -#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ -#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ -#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ -#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ -#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ -#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ -#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ - -#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ -#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ -#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ - -#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ -#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ -#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ -#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ -#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ - -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ -#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ -#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ - -#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ -#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ -#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ - -#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ -#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ -#define AT91_PMC_DIV (0xff << 0) /* Divider */ -#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ -#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ -#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ -#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ -#define AT91_PMC_USBDIV_1 (0 << 28) -#define AT91_PMC_USBDIV_2 (1 << 28) -#define AT91_PMC_USBDIV_4 (2 << 28) -#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ - -#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ -#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ -#define AT91_PMC_CSS_SLOW (0 << 0) -#define AT91_PMC_CSS_MAIN (1 << 0) -#define AT91_PMC_CSS_PLLA (2 << 0) -#define AT91_PMC_CSS_PLLB (3 << 0) -#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) -#define AT91_PMC_PRES_2 (1 << 2) -#define AT91_PMC_PRES_4 (2 << 2) -#define AT91_PMC_PRES_8 (3 << 2) -#define AT91_PMC_PRES_16 (4 << 2) -#define AT91_PMC_PRES_32 (5 << 2) -#define AT91_PMC_PRES_64 (6 << 2) -#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ -#define AT91RM9200_PMC_MDIV_2 (1 << 8) -#define AT91RM9200_PMC_MDIV_3 (2 << 8) -#define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ -#define AT91SAM9_PMC_MDIV_2 (1 << 8) -#define AT91SAM9_PMC_MDIV_4 (2 << 8) -#define AT91SAM9_PMC_MDIV_6 (3 << 8) -#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ -#define AT91_PMC_PDIV_1 (0 << 12) -#define AT91_PMC_PDIV_2 (1 << 12) - -#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ - -#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ -#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ -#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ -#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ -#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ -#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ -#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ -#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ -#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ -#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ -#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ -#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h deleted file mode 100644 index fb8d1618a231..000000000000 --- a/include/asm-arm/arch-at91/at91_rstc.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rstc.h - * - * Reset Controller (RSTC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RSTC_H -#define AT91_RSTC_H - -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ -#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ -#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ -#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ -#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ -#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ -#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) -#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) -#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) -#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) -#define AT91_RSTC_RSTTYP_USER (4 << 8) -#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ -#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ - -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ -#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ -#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ -#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h deleted file mode 100644 index af9bd28174c0..000000000000 --- a/include/asm-arm/arch-at91/at91_rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rtc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Real Time Clock (RTC) - System peripheral registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTC_H -#define AT91_RTC_H - -#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */ -#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */ -#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ -#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ -#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) -#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) - -#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ - -#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ -#define AT91_RTC_SEC (0x7f << 0) /* Current Second */ -#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ -#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ - -#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ -#define AT91_RTC_CENT (0x7f << 0) /* Current Century */ -#define AT91_RTC_YEAR (0xff << 8) /* Current Year */ -#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */ -#define AT91_RTC_DAY (7 << 21) /* Current Day */ -#define AT91_RTC_DATE (0x3f << 24) /* Current Date */ - -#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */ -#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */ -#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */ -#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */ - -#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */ -#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */ -#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */ - -#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */ -#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */ -#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */ -#define AT91_RTC_SECEV (1 << 2) /* Second Event */ -#define AT91_RTC_TIMEV (1 << 3) /* Time Event */ -#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */ - -#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */ -#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */ -#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */ -#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */ - -#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */ -#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */ -#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */ -#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */ -#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h deleted file mode 100644 index 39a32633b275..000000000000 --- a/include/asm-arm/arch-at91/at91_rtt.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_rtt.h - * - * Real-time Timer (RTT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTT_H -#define AT91_RTT_H - -#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ -#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ -#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ -#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ -#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ - -#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ -#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ - -#define AT91_RTT_VR 0x08 /* Real-time Value Register */ -#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ - -#define AT91_RTT_SR 0x0c /* Real-time Status Register */ -#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ -#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h deleted file mode 100644 index 581fa41d90e8..000000000000 --- a/include/asm-arm/arch-at91/at91_shdwc.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_shdwc.h - * - * Shutdown Controller (SHDWC) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SHDWC_H -#define AT91_SHDWC_H - -#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */ -#define AT91_SHDW_SHDW (1 << 0) /* Shut Down command */ -#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */ -#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */ -#define AT91_SHDW_WKMODE0_NONE 0 -#define AT91_SHDW_WKMODE0_HIGH 1 -#define AT91_SHDW_WKMODE0_LOW 2 -#define AT91_SHDW_WKMODE0_ANYLEVEL 3 -#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ -#define AT91_SHDW_CPTWK0_(x) ((x) << 4) -#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ - -#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ -#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ -#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ -#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h deleted file mode 100644 index f9b9a8464997..000000000000 --- a/include/asm-arm/arch-at91/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h deleted file mode 100644 index 0ecc73460b50..000000000000 --- a/include/asm-arm/arch-at91/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h deleted file mode 100644 index 30446e2ea772..000000000000 --- a/include/asm-arm/arch-at91/at91_st.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_st.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System Timer (ST) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ST_H -#define AT91_ST_H - -#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ - -#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ - -#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ - -#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ - -#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ - -#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */ -#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */ -#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */ - -#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ - -#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h deleted file mode 100644 index b85d3faeef5c..000000000000 --- a/include/asm-arm/arch-at91/at91_tc.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_tc.h - * - * Copyright (C) SAN People - * - * Timer/Counter Unit (TC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TC_H -#define AT91_TC_H - -#define AT91_TC_BCR 0xc0 /* TC Block Control Register */ -#define AT91_TC_SYNC (1 << 0) /* Synchro Command */ - -#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */ -#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */ -#define AT91_TC_TC0XC0S_TCLK0 (0 << 0) -#define AT91_TC_TC0XC0S_NONE (1 << 0) -#define AT91_TC_TC0XC0S_TIOA1 (2 << 0) -#define AT91_TC_TC0XC0S_TIOA2 (3 << 0) -#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */ -#define AT91_TC_TC1XC1S_TCLK1 (0 << 2) -#define AT91_TC_TC1XC1S_NONE (1 << 2) -#define AT91_TC_TC1XC1S_TIOA0 (2 << 2) -#define AT91_TC_TC1XC1S_TIOA2 (3 << 2) -#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */ -#define AT91_TC_TC2XC2S_TCLK2 (0 << 4) -#define AT91_TC_TC2XC2S_NONE (1 << 4) -#define AT91_TC_TC2XC2S_TIOA0 (2 << 4) -#define AT91_TC_TC2XC2S_TIOA1 (3 << 4) - - -#define AT91_TC_CCR 0x00 /* Channel Control Register */ -#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */ -#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */ -#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */ - -#define AT91_TC_CMR 0x04 /* Channel Mode Register */ -#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */ -#define AT91_TC_TIMER_CLOCK1 (0 << 0) -#define AT91_TC_TIMER_CLOCK2 (1 << 0) -#define AT91_TC_TIMER_CLOCK3 (2 << 0) -#define AT91_TC_TIMER_CLOCK4 (3 << 0) -#define AT91_TC_TIMER_CLOCK5 (4 << 0) -#define AT91_TC_XC0 (5 << 0) -#define AT91_TC_XC1 (6 << 0) -#define AT91_TC_XC2 (7 << 0) -#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */ -#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */ -#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */ -#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */ -#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */ -#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */ -#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */ -#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */ -#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */ -#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */ - -#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */ -#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */ -#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */ -#define AT91_TC_EEVTEDG_NONE (0 << 8) -#define AT91_TC_EEVTEDG_RISING (1 << 8) -#define AT91_TC_EEVTEDG_FALLING (2 << 8) -#define AT91_TC_EEVTEDG_BOTH (3 << 8) -#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */ -#define AT91_TC_EEVT_TIOB (0 << 10) -#define AT91_TC_EEVT_XC0 (1 << 10) -#define AT91_TC_EEVT_XC1 (2 << 10) -#define AT91_TC_EEVT_XC2 (3 << 10) -#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */ -#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */ -#define AT91_TC_WAVESEL_UP (0 << 13) -#define AT91_TC_WAVESEL_UP_AUTO (2 << 13) -#define AT91_TC_WAVESEL_UPDOWN (1 << 13) -#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13) -#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */ -#define AT91_TC_ACPA_NONE (0 << 16) -#define AT91_TC_ACPA_SET (1 << 16) -#define AT91_TC_ACPA_CLEAR (2 << 16) -#define AT91_TC_ACPA_TOGGLE (3 << 16) -#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */ -#define AT91_TC_ACPC_NONE (0 << 18) -#define AT91_TC_ACPC_SET (1 << 18) -#define AT91_TC_ACPC_CLEAR (2 << 18) -#define AT91_TC_ACPC_TOGGLE (3 << 18) -#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */ -#define AT91_TC_AEEVT_NONE (0 << 20) -#define AT91_TC_AEEVT_SET (1 << 20) -#define AT91_TC_AEEVT_CLEAR (2 << 20) -#define AT91_TC_AEEVT_TOGGLE (3 << 20) -#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */ -#define AT91_TC_ASWTRG_NONE (0 << 22) -#define AT91_TC_ASWTRG_SET (1 << 22) -#define AT91_TC_ASWTRG_CLEAR (2 << 22) -#define AT91_TC_ASWTRG_TOGGLE (3 << 22) -#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */ -#define AT91_TC_BCPB_NONE (0 << 24) -#define AT91_TC_BCPB_SET (1 << 24) -#define AT91_TC_BCPB_CLEAR (2 << 24) -#define AT91_TC_BCPB_TOGGLE (3 << 24) -#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */ -#define AT91_TC_BCPC_NONE (0 << 26) -#define AT91_TC_BCPC_SET (1 << 26) -#define AT91_TC_BCPC_CLEAR (2 << 26) -#define AT91_TC_BCPC_TOGGLE (3 << 26) -#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */ -#define AT91_TC_BEEVT_NONE (0 << 28) -#define AT91_TC_BEEVT_SET (1 << 28) -#define AT91_TC_BEEVT_CLEAR (2 << 28) -#define AT91_TC_BEEVT_TOGGLE (3 << 28) -#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */ -#define AT91_TC_BSWTRG_NONE (0 << 30) -#define AT91_TC_BSWTRG_SET (1 << 30) -#define AT91_TC_BSWTRG_CLEAR (2 << 30) -#define AT91_TC_BSWTRG_TOGGLE (3 << 30) - -#define AT91_TC_CV 0x10 /* Counter Value */ -#define AT91_TC_RA 0x14 /* Register A */ -#define AT91_TC_RB 0x18 /* Register B */ -#define AT91_TC_RC 0x1c /* Register C */ - -#define AT91_TC_SR 0x20 /* Status Register */ -#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */ -#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */ -#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */ -#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */ -#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */ -#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */ -#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */ -#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */ -#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */ -#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */ -#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */ - -#define AT91_TC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h deleted file mode 100644 index f9f2e3cd95c5..000000000000 --- a/include/asm-arm/arch-at91/at91_twi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_twi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Two-wire Interface (TWI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TWI_H -#define AT91_TWI_H - -#define AT91_TWI_CR 0x00 /* Control Register */ -#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ -#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ -#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ -#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ -#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_TWI_MMR 0x04 /* Master Mode Register */ -#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ -#define AT91_TWI_IADRSZ_NO (0 << 8) -#define AT91_TWI_IADRSZ_1 (1 << 8) -#define AT91_TWI_IADRSZ_2 (2 << 8) -#define AT91_TWI_IADRSZ_3 (3 << 8) -#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ -#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ - -#define AT91_TWI_IADR 0x0c /* Internal Address Register */ - -#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ -#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ -#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ - -#define AT91_TWI_SR 0x20 /* Status Register */ -#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ -#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ -#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ -#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - -#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ -#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ -#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ - -#endif - diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h deleted file mode 100644 index 1014e9bf181f..000000000000 --- a/include/asm-arm/arch-at91/at91_wdt.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_wdt.h - * - * Watchdog Timer (WDT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_WDT_H -#define AT91_WDT_H - -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ -#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ -#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ -#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ -#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ -#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ -#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ -#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ -#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ -#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ -#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ - -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ -#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ -#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h deleted file mode 100644 index 6f14d9053ac7..000000000000 --- a/include/asm-arm/arch-at91/at91cap9.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9.h - * - * Copyright (C) 2007 Stelian Pop - * Copyright (C) 2007 Lead Tech Design - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -/* - * User Peripheral physical base addresses. - */ -#define AT91CAP9_BASE_UDPHS 0xfff78000 -#define AT91CAP9_BASE_TCB0 0xfff7c000 -#define AT91CAP9_BASE_TC0 0xfff7c000 -#define AT91CAP9_BASE_TC1 0xfff7c040 -#define AT91CAP9_BASE_TC2 0xfff7c080 -#define AT91CAP9_BASE_MCI0 0xfff80000 -#define AT91CAP9_BASE_MCI1 0xfff84000 -#define AT91CAP9_BASE_TWI 0xfff88000 -#define AT91CAP9_BASE_US0 0xfff8c000 -#define AT91CAP9_BASE_US1 0xfff90000 -#define AT91CAP9_BASE_US2 0xfff94000 -#define AT91CAP9_BASE_SSC0 0xfff98000 -#define AT91CAP9_BASE_SSC1 0xfff9c000 -#define AT91CAP9_BASE_AC97C 0xfffa0000 -#define AT91CAP9_BASE_SPI0 0xfffa4000 -#define AT91CAP9_BASE_SPI1 0xfffa8000 -#define AT91CAP9_BASE_CAN 0xfffac000 -#define AT91CAP9_BASE_PWMC 0xfffb8000 -#define AT91CAP9_BASE_EMAC 0xfffbc000 -#define AT91CAP9_BASE_ADC 0xfffc0000 -#define AT91CAP9_BASE_ISI 0xfffc4000 -#define AT91_BASE_SYS 0xffffe200 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) -#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) -#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) -#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91CAP9_BASE_US0 -#define AT91_USART1 AT91CAP9_BASE_US1 -#define AT91_USART2 AT91CAP9_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h deleted file mode 100644 index efdb23af1ee4..000000000000 --- a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9_ddrsdr.h - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 - -#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h deleted file mode 100644 index ddbd4873c842..000000000000 --- a/include/asm-arm/arch-at91/at91cap9_matrix.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91cap9_matrix.h - * - * Copyright (C) 2007 Stelian Pop - * Copyright (C) 2007 Lead Tech Design - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_UDPHS (AT91_MATRIX + 0x118) /* USBHS Special Function Register [AT91CAP9 only] */ -#define AT91_MATRIX_SELECT_UDPHS (0 << 31) /* select High Speed UDP */ -#define AT91_MATRIX_SELECT_UDP (1 << 31) /* select standard UDP */ -#define AT91_MATRIX_UDPHS_BYPASS_LOCK (1 << 30) /* bypass lock bit */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h deleted file mode 100644 index e8fc0b1c33f4..000000000000 --- a/include/asm-arm/arch-at91/at91rm9200.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91RM9200_ID_US0 6 /* USART 0 */ -#define AT91RM9200_ID_US1 7 /* USART 1 */ -#define AT91RM9200_ID_US2 8 /* USART 2 */ -#define AT91RM9200_ID_US3 9 /* USART 3 */ -#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91RM9200_ID_UDP 11 /* USB Device Port */ -#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ -#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ -#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ -#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ -#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ -#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ -#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ -#define AT91RM9200_ID_UHP 23 /* USB Host port */ -#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ -#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ - - -/* - * Peripheral physical base addresses. - */ -#define AT91RM9200_BASE_TCB0 0xfffa0000 -#define AT91RM9200_BASE_TC0 0xfffa0000 -#define AT91RM9200_BASE_TC1 0xfffa0040 -#define AT91RM9200_BASE_TC2 0xfffa0080 -#define AT91RM9200_BASE_TCB1 0xfffa4000 -#define AT91RM9200_BASE_TC3 0xfffa4000 -#define AT91RM9200_BASE_TC4 0xfffa4040 -#define AT91RM9200_BASE_TC5 0xfffa4080 -#define AT91RM9200_BASE_UDP 0xfffb0000 -#define AT91RM9200_BASE_MCI 0xfffb4000 -#define AT91RM9200_BASE_TWI 0xfffb8000 -#define AT91RM9200_BASE_EMAC 0xfffbc000 -#define AT91RM9200_BASE_US0 0xfffc0000 -#define AT91RM9200_BASE_US1 0xfffc4000 -#define AT91RM9200_BASE_US2 0xfffc8000 -#define AT91RM9200_BASE_US3 0xfffcc000 -#define AT91RM9200_BASE_SSC0 0xfffd0000 -#define AT91RM9200_BASE_SSC1 0xfffd4000 -#define AT91RM9200_BASE_SSC2 0xfffd8000 -#define AT91RM9200_BASE_SPI 0xfffe0000 -#define AT91_BASE_SYS 0xfffff000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */ -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */ -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */ -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */ -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */ -#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */ -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */ -#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */ - -#define AT91_USART0 AT91RM9200_BASE_US0 -#define AT91_USART1 AT91RM9200_BASE_US1 -#define AT91_USART2 AT91RM9200_BASE_US2 -#define AT91_USART3 AT91RM9200_BASE_US3 - -#define AT91_MATRIX 0 /* not supported */ - -/* - * Internal Memory. - */ -#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h deleted file mode 100644 index 0c417af5fe7f..000000000000 --- a/include/asm-arm/arch-at91/at91rm9200_emac.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200_emac.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Ethernet MAC registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_EMAC_H -#define AT91RM9200_EMAC_H - -#define AT91_EMAC_CTL 0x00 /* Control Register */ -#define AT91_EMAC_LB (1 << 0) /* Loopback */ -#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */ -#define AT91_EMAC_RE (1 << 2) /* Receive Enable */ -#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */ -#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */ -#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */ -#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */ -#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */ -#define AT91_EMAC_BP (1 << 8) /* Back Pressure */ - -#define AT91_EMAC_CFG 0x04 /* Configuration Register */ -#define AT91_EMAC_SPD (1 << 0) /* Speed */ -#define AT91_EMAC_FD (1 << 1) /* Full Duplex */ -#define AT91_EMAC_BR (1 << 2) /* Bit Rate */ -#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */ -#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */ -#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */ -#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */ -#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */ -#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */ -#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */ -#define AT91_EMAC_CLK_DIV8 (0 << 10) -#define AT91_EMAC_CLK_DIV16 (1 << 10) -#define AT91_EMAC_CLK_DIV32 (2 << 10) -#define AT91_EMAC_CLK_DIV64 (3 << 10) -#define AT91_EMAC_RTY (1 << 12) /* Retry Test */ -#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */ - -#define AT91_EMAC_SR 0x08 /* Status Register */ -#define AT91_EMAC_SR_LINK (1 << 0) /* Link */ -#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */ -#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */ - -#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */ - -#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */ -#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */ -#define AT91_EMAC_NCRC (1 << 15) /* No CRC */ - -#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */ -#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */ -#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */ -#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */ -#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */ -#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */ -#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */ - -#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */ - -#define AT91_EMAC_RSR 0x20 /* Receive Status Register */ -#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */ -#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */ -#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */ - -#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */ -#define AT91_EMAC_DONE (1 << 0) /* Management Done */ -#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */ -#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */ -#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */ -#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */ -#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */ -#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */ -#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */ -#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */ -#define AT91_EMAC_LINK (1 << 9) /* Link */ -#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */ -#define AT91_EMAC_ABT (1 << 11) /* Abort */ - -#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */ -#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */ -#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */ - -#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */ -#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */ -#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */ -#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */ -#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */ -#define AT91_EMAC_RW_W (1 << 28) -#define AT91_EMAC_RW_R (2 << 28) -#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */ - -/* - * Statistics Registers. - */ -#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */ -#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */ -#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */ -#define AT91_EMAC_OK 0x4c /* Frames Received OK */ -#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */ -#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */ -#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */ -#define AT91_EMAC_LCOL 0x5c /* Late Collision */ -#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */ -#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */ -#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */ -#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */ -#define AT91_EMAC_ROV 0x70 /* Receive Overrun */ -#define AT91_EMAC_CDE 0x74 /* Code Error */ -#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */ -#define AT91_EMAC_RJB 0x7c /* Receive Jabber */ -#define AT91_EMAC_USF 0x80 /* Undersize Frame */ -#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */ - -/* - * Address Registers. - */ -#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */ -#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */ -#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */ -#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */ -#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */ -#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */ -#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */ -#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */ -#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */ -#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */ - -#endif diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h deleted file mode 100644 index 24d012939cc4..000000000000 --- a/include/asm-arm/arch-at91/at91rm9200_mc.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91rm9200_mc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_MC_H -#define AT91RM9200_MC_H - -/* Memory Controller */ -#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */ -#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ - -#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */ -#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ -#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ -#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ -#define AT91_MC_ABTSZ_BYTE (0 << 8) -#define AT91_MC_ABTSZ_HALFWORD (1 << 8) -#define AT91_MC_ABTSZ_WORD (2 << 8) -#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ -#define AT91_MC_ABTTYP_DATAREAD (0 << 10) -#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) -#define AT91_MC_ABTTYP_FETCH (2 << 10) -#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ -#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ -#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ -#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ -#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ -#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ -#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ -#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ - -#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */ - -#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */ -#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ -#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ -#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ -#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ - -/* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */ -#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ -#define AT91_EBI_CS0A_SMC (0 << 0) -#define AT91_EBI_CS0A_BFC (1 << 0) -#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_EBI_CS1A_SMC (0 << 1) -#define AT91_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ -#define AT91_EBI_CS3A_SMC (0 << 3) -#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ -#define AT91_EBI_CS4A_SMC (0 << 4) -#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) -#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ -#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ - -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */ -#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ -#define AT91_SMC_NWS_(x) ((x) << 0) -#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ -#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ -#define AT91_SMC_TDF_(x) ((x) << 8) -#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ -#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ -#define AT91_SMC_DBW_16 (1 << 13) -#define AT91_SMC_DBW_8 (2 << 13) -#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ -#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ -#define AT91_SMC_ACSS_STD (0 << 16) -#define AT91_SMC_ACSS_1 (1 << 16) -#define AT91_SMC_ACSS_2 (2 << 16) -#define AT91_SMC_ACSS_3 (3 << 16) -#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ -#define AT91_SMC_RWSETUP_(x) ((x) << 24) -#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ -#define AT91_SMC_RWHOLD_(x) ((x) << 28) - -/* SDRAM Controller registers */ -#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91_SDRAMC_MODE_NOP (1 << 0) -#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91_SDRAMC_MODE_LMR (3 << 0) -#define AT91_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 4) -#define AT91_SDRAMC_DBW_16 (1 << 4) - -#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */ -#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */ -#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */ - -/* Burst Flash Controller register */ -#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */ -#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ -#define AT91_BFC_BFCOM_DISABLED (0 << 0) -#define AT91_BFC_BFCOM_ASYNC (1 << 0) -#define AT91_BFC_BFCOM_BURST (2 << 0) -#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ -#define AT91_BFC_BFCC_MCK (1 << 2) -#define AT91_BFC_BFCC_DIV2 (2 << 2) -#define AT91_BFC_BFCC_DIV4 (3 << 2) -#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ -#define AT91_BFC_PAGES (7 << 8) /* Page Size */ -#define AT91_BFC_PAGES_NO_PAGE (0 << 8) -#define AT91_BFC_PAGES_16 (1 << 8) -#define AT91_BFC_PAGES_32 (2 << 8) -#define AT91_BFC_PAGES_64 (3 << 8) -#define AT91_BFC_PAGES_128 (4 << 8) -#define AT91_BFC_PAGES_256 (5 << 8) -#define AT91_BFC_PAGES_512 (6 << 8) -#define AT91_BFC_PAGES_1024 (7 << 8) -#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ -#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ -#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ -#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ -#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h deleted file mode 100644 index 889872a3f2a9..000000000000 --- a/include/asm-arm/arch-at91/at91sam9260.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260.h - * - * (C) 2006 Andrew Victor - * - * Common definitions. - * Based on AT91SAM9260 datasheet revision A (Preliminary). - * - * Includes also definitions for AT91SAM9XE and AT91SAM9G families - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_H -#define AT91SAM9260_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ -#define AT91SAM9260_ID_US0 6 /* USART 0 */ -#define AT91SAM9260_ID_US1 7 /* USART 1 */ -#define AT91SAM9260_ID_US2 8 /* USART 2 */ -#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ -#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9260_ID_UHP 20 /* USB Host port */ -#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ -#define AT91SAM9260_ID_US3 23 /* USART 3 */ -#define AT91SAM9260_ID_US4 24 /* USART 4 */ -#define AT91SAM9260_ID_US5 25 /* USART 5 */ -#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ -#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ -#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ -#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9260_BASE_TCB0 0xfffa0000 -#define AT91SAM9260_BASE_TC0 0xfffa0000 -#define AT91SAM9260_BASE_TC1 0xfffa0040 -#define AT91SAM9260_BASE_TC2 0xfffa0080 -#define AT91SAM9260_BASE_UDP 0xfffa4000 -#define AT91SAM9260_BASE_MCI 0xfffa8000 -#define AT91SAM9260_BASE_TWI 0xfffac000 -#define AT91SAM9260_BASE_US0 0xfffb0000 -#define AT91SAM9260_BASE_US1 0xfffb4000 -#define AT91SAM9260_BASE_US2 0xfffb8000 -#define AT91SAM9260_BASE_SSC 0xfffbc000 -#define AT91SAM9260_BASE_ISI 0xfffc0000 -#define AT91SAM9260_BASE_EMAC 0xfffc4000 -#define AT91SAM9260_BASE_SPI0 0xfffc8000 -#define AT91SAM9260_BASE_SPI1 0xfffcc000 -#define AT91SAM9260_BASE_US3 0xfffd0000 -#define AT91SAM9260_BASE_US4 0xfffd4000 -#define AT91SAM9260_BASE_US5 0xfffd8000 -#define AT91SAM9260_BASE_TCB1 0xfffdc000 -#define AT91SAM9260_BASE_TC3 0xfffdc000 -#define AT91SAM9260_BASE_TC4 0xfffdc040 -#define AT91SAM9260_BASE_TC5 0xfffdc080 -#define AT91SAM9260_BASE_ADC 0xfffe0000 -#define AT91_BASE_SYS 0xffffe800 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9260_BASE_US0 -#define AT91_USART1 AT91SAM9260_BASE_US1 -#define AT91_USART2 AT91SAM9260_BASE_US2 -#define AT91_USART3 AT91SAM9260_BASE_US3 -#define AT91_USART4 AT91SAM9260_BASE_US4 -#define AT91_USART5 AT91SAM9260_BASE_US5 - - -/* - * Internal Memory. - */ -#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ -#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ - -#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ - -#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ -#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ - -#define AT91SAM9G20_ROM_BASE 0x00100000 /* Internal ROM base address */ -#define AT91SAM9G20_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9G20_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ -#define AT91SAM9G20_SRAM0_SIZE SZ_16K /* Internal SRAM 0 size (16Kb) */ -#define AT91SAM9G20_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ -#define AT91SAM9G20_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9G20_UHP_BASE 0x00500000 /* USB Host controller */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h deleted file mode 100644 index a8e9fec6c735..000000000000 --- a/include/asm-arm/arch-at91/at91sam9260_matrix.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260_matrix.h - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9260 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9260_MATRIX_H -#define AT91SAM9260_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h deleted file mode 100644 index c7c4778dac49..000000000000 --- a/include/asm-arm/arch-at91/at91sam9261.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9261.h - * - * Copyright (C) SAN People - * - * Common definitions. - * Based on AT91SAM9261 datasheet revision E. (Preliminary) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_H -#define AT91SAM9261_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9261_ID_US0 6 /* USART 0 */ -#define AT91SAM9261_ID_US1 7 /* USART 1 */ -#define AT91SAM9261_ID_US2 8 /* USART 2 */ -#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */ -#define AT91SAM9261_ID_UDP 10 /* USB Device Port */ -#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */ -#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */ -#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */ -#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */ -#define AT91SAM9261_ID_UHP 20 /* USB Host port */ -#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */ -#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9261_BASE_TCB0 0xfffa0000 -#define AT91SAM9261_BASE_TC0 0xfffa0000 -#define AT91SAM9261_BASE_TC1 0xfffa0040 -#define AT91SAM9261_BASE_TC2 0xfffa0080 -#define AT91SAM9261_BASE_UDP 0xfffa4000 -#define AT91SAM9261_BASE_MCI 0xfffa8000 -#define AT91SAM9261_BASE_TWI 0xfffac000 -#define AT91SAM9261_BASE_US0 0xfffb0000 -#define AT91SAM9261_BASE_US1 0xfffb4000 -#define AT91SAM9261_BASE_US2 0xfffb8000 -#define AT91SAM9261_BASE_SSC0 0xfffbc000 -#define AT91SAM9261_BASE_SSC1 0xfffc0000 -#define AT91SAM9261_BASE_SSC2 0xfffc4000 -#define AT91SAM9261_BASE_SPI0 0xfffc8000 -#define AT91SAM9261_BASE_SPI1 0xfffcc000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9261_BASE_US0 -#define AT91_USART1 AT91SAM9261_BASE_US1 -#define AT91_USART2 AT91SAM9261_BASE_US2 - - -/* - * Internal Memory. - */ -#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */ - -#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */ -#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h deleted file mode 100644 index 6f072421be5b..000000000000 --- a/include/asm-arm/arch-at91/at91sam9261_matrix.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9261_matrix.h - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9261_MATRIX_H -#define AT91SAM9261_MATRIX_H - -#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */ -#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h deleted file mode 100644 index 018a647311da..000000000000 --- a/include/asm-arm/arch-at91/at91sam9263.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9263.h - * - * (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_H -#define AT91SAM9263_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ -#define AT91SAM9263_ID_US0 7 /* USART 0 */ -#define AT91SAM9263_ID_US1 8 /* USART 1 */ -#define AT91SAM9263_ID_US2 9 /* USART 2 */ -#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */ -#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */ -#define AT91SAM9263_ID_CAN 12 /* CAN */ -#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */ -#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */ -#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */ -#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */ -#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */ -#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */ -#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */ -#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */ -#define AT91SAM9263_ID_EMAC 21 /* Ethernet */ -#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */ -#define AT91SAM9263_ID_UDP 24 /* USB Device Port */ -#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */ -#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */ -#define AT91SAM9263_ID_DMA 27 /* DMA Controller */ -#define AT91SAM9263_ID_UHP 29 /* USB Host port */ -#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9263_BASE_UDP 0xfff78000 -#define AT91SAM9263_BASE_TCB0 0xfff7c000 -#define AT91SAM9263_BASE_TC0 0xfff7c000 -#define AT91SAM9263_BASE_TC1 0xfff7c040 -#define AT91SAM9263_BASE_TC2 0xfff7c080 -#define AT91SAM9263_BASE_MCI0 0xfff80000 -#define AT91SAM9263_BASE_MCI1 0xfff84000 -#define AT91SAM9263_BASE_TWI 0xfff88000 -#define AT91SAM9263_BASE_US0 0xfff8c000 -#define AT91SAM9263_BASE_US1 0xfff90000 -#define AT91SAM9263_BASE_US2 0xfff94000 -#define AT91SAM9263_BASE_SSC0 0xfff98000 -#define AT91SAM9263_BASE_SSC1 0xfff9c000 -#define AT91SAM9263_BASE_AC97C 0xfffa0000 -#define AT91SAM9263_BASE_SPI0 0xfffa4000 -#define AT91SAM9263_BASE_SPI1 0xfffa8000 -#define AT91SAM9263_BASE_CAN 0xfffac000 -#define AT91SAM9263_BASE_PWMC 0xfffb8000 -#define AT91SAM9263_BASE_EMAC 0xfffbc000 -#define AT91SAM9263_BASE_ISI 0xfffc4000 -#define AT91SAM9263_BASE_2DGE 0xfffc8000 -#define AT91_BASE_SYS 0xffffe000 - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS) -#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS) -#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS) -#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS) -#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) -#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS) -#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9263_BASE_US0 -#define AT91_USART1 AT91SAM9263_BASE_US1 -#define AT91_USART2 AT91SAM9263_BASE_US2 - -#define AT91_SMC AT91_SMC0 - -/* - * Internal Memory. - */ -#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */ -#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */ - -#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ - -#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */ -#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */ - -#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */ -#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */ -#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */ - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h deleted file mode 100644 index 72f6e668e414..000000000000 --- a/include/asm-arm/arch-at91/at91sam9263_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9263_matrix.h - * - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9263 datasheet revision B (Preliminary). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9263_MATRIX_H -#define AT91SAM9263_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) - -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */ -#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3) -#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16) - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9_sdramc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h deleted file mode 100644 index d3b8b3da6b4d..000000000000 --- a/include/asm-arm/arch-at91/at91sam9_sdramc.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9_sdramc.h - * - * SDRAM Controllers (SDRAMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SDRAMC_H -#define AT91SAM9_SDRAMC_H - -/* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ -#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91_SDRAMC_MODE_NORMAL 0 -#define AT91_SDRAMC_MODE_NOP 1 -#define AT91_SDRAMC_MODE_PRECHARGE 2 -#define AT91_SDRAMC_MODE_LMR 3 -#define AT91_SDRAMC_MODE_REFRESH 4 -#define AT91_SDRAMC_MODE_EXT_LMR 5 -#define AT91_SDRAMC_MODE_DEEP 6 - -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ -#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ -#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_SDRAMC_NC_8 (0 << 0) -#define AT91_SDRAMC_NC_9 (1 << 0) -#define AT91_SDRAMC_NC_10 (2 << 0) -#define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_SDRAMC_NR_11 (0 << 2) -#define AT91_SDRAMC_NR_12 (1 << 2) -#define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91_SDRAMC_CAS_1 (1 << 5) -#define AT91_SDRAMC_CAS_2 (2 << 5) -#define AT91_SDRAMC_CAS_3 (3 << 5) -#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ -#define AT91_SDRAMC_DBW_32 (0 << 7) -#define AT91_SDRAMC_DBW_16 (1 << 7) -#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ -#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ -#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ -#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ -#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ -#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ - -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ -#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_SDRAMC_LPCB_DISABLE 0 -#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 -#define AT91_SDRAMC_LPCB_POWER_DOWN 2 -#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ -#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ -#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ - -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ -#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ -#define AT91_SDRAMC_MD_SDRAM 0 -#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 - - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h deleted file mode 100644 index 9e49eed31e50..000000000000 --- a/include/asm-arm/arch-at91/at91sam9_smc.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9_smc.h - * - * Static Memory Controllers (SMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SMC_H -#define AT91SAM9_SMC_H - -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9rl.h b/include/asm-arm/arch-at91/at91sam9rl.h deleted file mode 100644 index 622e56f81d42..000000000000 --- a/include/asm-arm/arch-at91/at91sam9rl.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9260.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Common definitions. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_H -#define AT91SAM9RL_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ -#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91SAM9RL_ID_US0 6 /* USART 0 */ -#define AT91SAM9RL_ID_US1 7 /* USART 1 */ -#define AT91SAM9RL_ID_US2 8 /* USART 2 */ -#define AT91SAM9RL_ID_US3 9 /* USART 3 */ -#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */ -#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */ -#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */ -#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */ -#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */ -#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */ -#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */ -#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */ -#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */ -#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */ -#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */ -#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT91SAM9RL_BASE_TCB0 0xfffa0000 -#define AT91SAM9RL_BASE_TC0 0xfffa0000 -#define AT91SAM9RL_BASE_TC1 0xfffa0040 -#define AT91SAM9RL_BASE_TC2 0xfffa0080 -#define AT91SAM9RL_BASE_MCI 0xfffa4000 -#define AT91SAM9RL_BASE_TWI0 0xfffa8000 -#define AT91SAM9RL_BASE_TWI1 0xfffac000 -#define AT91SAM9RL_BASE_US0 0xfffb0000 -#define AT91SAM9RL_BASE_US1 0xfffb4000 -#define AT91SAM9RL_BASE_US2 0xfffb8000 -#define AT91SAM9RL_BASE_US3 0xfffbc000 -#define AT91SAM9RL_BASE_SSC0 0xfffc0000 -#define AT91SAM9RL_BASE_SSC1 0xfffc4000 -#define AT91SAM9RL_BASE_PWMC 0xfffc8000 -#define AT91SAM9RL_BASE_SPI 0xfffcc000 -#define AT91SAM9RL_BASE_TSC 0xfffd0000 -#define AT91SAM9RL_BASE_UDPHS 0xfffd4000 -#define AT91SAM9RL_BASE_AC97C 0xfffd8000 -#define AT91_BASE_SYS 0xffffc000 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_DMA (0xffffe600 - AT91_BASE_SYS) -#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) -#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) -#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) -#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) - -#define AT91_USART0 AT91SAM9RL_BASE_US0 -#define AT91_USART1 AT91SAM9RL_BASE_US1 -#define AT91_USART2 AT91SAM9RL_BASE_US2 -#define AT91_USART3 AT91SAM9RL_BASE_US3 - - -/* - * Internal Memory. - */ -#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ - -#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ - -#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ - -#endif diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h deleted file mode 100644 index 84224174e6a1..000000000000 --- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam9rl_matrix.h - * - * Copyright (C) 2007 Atmel Corporation - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9RL datasheet revision A. (Preliminary) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -#ifndef AT91SAM9RL_MATRIX_H -#define AT91SAM9RL_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) - -#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) - - -#endif diff --git a/include/asm-arm/arch-at91/at91x40.h b/include/asm-arm/arch-at91/at91x40.h deleted file mode 100644 index 612203e0177f..000000000000 --- a/include/asm-arm/arch-at91/at91x40.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91x40.h - * - * (C) Copyright 2007, Greg Ungerer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91X40_H -#define AT91X40_H - -/* - * IRQ list. - */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91X40_ID_USART0 2 /* USART port 0 */ -#define AT91X40_ID_USART1 3 /* USART port 1 */ -#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ -#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/ -#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/ -#define AT91X40_ID_WD 7 /* Watchdog? */ -#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */ - -#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */ -#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */ -#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */ - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_BASE_SYS 0xffc00000 - -#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */ -#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */ -#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */ -#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */ -#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */ -#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */ -#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */ -#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */ -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */ - -/* - * The AT91x40 series doesn't have a debug unit like the other AT91 parts. - * But it does have a chip identify register and extension ID, so define at - * least these here. - */ -#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */ -#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */ - -#endif /* AT91X40_H */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h deleted file mode 100644 index 48bbd854f57d..000000000000 --- a/include/asm-arm/arch-at91/board.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * include/asm-arm/arch-at91/board.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * These are data structures found in platform_device.dev.platform_data, - * and describing board-specific data needed by drivers. For example, - * which pin is used for a given GPIO role. - * - * In 2.6, drivers should strongly avoid board-specific knowledge so - * that supporting new boards normally won't require driver patches. - * Most board-specific knowledge should be in arch/.../board-*.c files. - */ - -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include -#include -#include -#include -#include -#include - - /* USB Device */ -struct at91_udc_data { - u8 vbus_pin; /* high == host powering us */ - u8 pullup_pin; /* active == D+ pulled up */ - u8 pullup_active_low; /* true == pullup_pin is active low */ -}; -extern void __init at91_add_device_udc(struct at91_udc_data *data); - - /* USB High Speed Device */ -extern void __init at91_add_device_usba(struct usba_platform_data *data); - - /* Compact Flash */ -struct at91_cf_data { - u8 irq_pin; /* I/O IRQ */ - u8 det_pin; /* Card detect */ - u8 vcc_pin; /* power switching */ - u8 rst_pin; /* card reset */ - u8 chipselect; /* EBI Chip Select number */ -}; -extern void __init at91_add_device_cf(struct at91_cf_data *data); - - /* MMC / SD */ -struct at91_mmc_data { - u8 det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - u8 wp_pin; /* (SD) writeprotect detect */ - u8 vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - - /* Ethernet (EMAC & MACB) */ -struct at91_eth_data { - u32 phy_mask; - u8 phy_irq_pin; /* PHY IRQ */ - u8 is_rmii; /* using RMII interface? */ -}; -extern void __init at91_add_device_eth(struct at91_eth_data *data); - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) -#define eth_platform_data at91_eth_data -#endif - - /* USB Host */ -struct at91_usbh_data { - u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ -}; -extern void __init at91_add_device_usbh(struct at91_usbh_data *data); - - /* NAND / SmartMedia */ -struct atmel_nand_data { - u8 enable_pin; /* chip enable */ - u8 det_pin; /* card detect */ - u8 rdy_pin; /* ready/busy */ - u8 ale; /* address line number connected to ALE */ - u8 cle; /* address line number connected to CLE */ - u8 bus_width_16; /* buswidth is 16 bit */ - struct mtd_partition* (*partition_info)(int, int*); -}; -extern void __init at91_add_device_nand(struct atmel_nand_data *data); - - /* I2C*/ -extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices); - - /* SPI */ -extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); - - /* Serial */ -#define ATMEL_UART_CTS 0x01 -#define ATMEL_UART_RTS 0x02 -#define ATMEL_UART_DSR 0x04 -#define ATMEL_UART_DTR 0x08 -#define ATMEL_UART_DCD 0x10 -#define ATMEL_UART_RI 0x20 - -extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); -extern void __init at91_set_serial_console(unsigned portnr); - -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; -extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); - -struct atmel_uart_data { - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virtual base address, if any */ -}; -extern void __init at91_add_device_serial(void); - -/* - * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC - * platform devices. Their SSC ID is part of their configuration data, - * along with information about which SSC signals they should use. - */ -#define ATMEL_SSC_TK 0x01 -#define ATMEL_SSC_TF 0x02 -#define ATMEL_SSC_TD 0x04 -#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) - -#define ATMEL_SSC_RK 0x10 -#define ATMEL_SSC_RF 0x20 -#define ATMEL_SSC_RD 0x40 -#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) - -extern void __init at91_add_device_ssc(unsigned id, unsigned pins); - - /* LCD Controller */ -struct atmel_lcdfb_info; -extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); - - /* AC97 */ -struct atmel_ac97_data { - u8 reset_pin; /* reset */ -}; -extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); - - /* ISI */ -extern void __init at91_add_device_isi(void); - - /* LEDs */ -extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); -extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); - -/* FIXME: this needs a better location, but gets stuff building again */ -extern int at91_suspend_entering_slow_clock(void); - -#endif diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h deleted file mode 100644 index f24b55c9083f..000000000000 --- a/include/asm-arm/arch-at91/cpu.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * include/asm-arm/arch-at91/cpu.h - * - * Copyright (C) 2006 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -#include -#include - - -#define ARCH_ID_AT91RM9200 0x09290780 -#define ARCH_ID_AT91SAM9260 0x019803a0 -#define ARCH_ID_AT91SAM9261 0x019703a0 -#define ARCH_ID_AT91SAM9263 0x019607a0 -#define ARCH_ID_AT91SAM9G20 0x019905a0 -#define ARCH_ID_AT91SAM9RL64 0x019b03a0 -#define ARCH_ID_AT91CAP9 0x039A03A0 - -#define ARCH_ID_AT91SAM9XE128 0x329973a0 -#define ARCH_ID_AT91SAM9XE256 0x329a93a0 -#define ARCH_ID_AT91SAM9XE512 0x329aa3a0 - -#define ARCH_ID_AT91M40800 0x14080044 -#define ARCH_ID_AT91R40807 0x44080746 -#define ARCH_ID_AT91M40807 0x14080745 -#define ARCH_ID_AT91R40008 0x44000840 - -static inline unsigned long at91_cpu_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); -} - - -#define ARCH_FAMILY_AT91X92 0x09200000 -#define ARCH_FAMILY_AT91SAM9 0x01900000 -#define ARCH_FAMILY_AT91SAM9XE 0x02900000 - -static inline unsigned long at91_arch_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); -} - - -#ifdef CONFIG_ARCH_AT91RM9200 -#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -#else -#define cpu_is_at91rm9200() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) -#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) -#else -#define cpu_is_at91sam9g20() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9261 -#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) -#else -#define cpu_is_at91sam9261() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9263 -#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) -#else -#define cpu_is_at91sam9263() (0) -#endif - -#ifdef CONFIG_ARCH_AT91SAM9RL -#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) -#else -#define cpu_is_at91sam9rl() (0) -#endif - -#ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -#else -#define cpu_is_at91cap9() (0) -#endif - -/* - * Since this is ARM, we will never run on any AVR32 CPU. But these - * definitions may reduce clutter in common drivers. - */ -#define cpu_is_at32ap7000() (0) - -#endif diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S deleted file mode 100644 index ff28696b6d90..000000000000 --- a/include/asm-arm/arch-at91/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-at91/debug-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete - beq 1001b - .endm - diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h deleted file mode 100644 index 774565412beb..000000000000 --- a/include/asm-arm/arch-at91/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-at91/dma.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S deleted file mode 100644 index cbaf6050154a..000000000000 --- a/include/asm-arm/arch-at91/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-at91/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now. - .endm - diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h deleted file mode 100644 index 0a241e2fb672..000000000000 --- a/include/asm-arm/arch-at91/gpio.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * include/asm-arm/arch-at91/gpio.h - * - * Copyright (C) 2005 HP Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_AT91RM9200_GPIO_H -#define __ASM_ARCH_AT91RM9200_GPIO_H - -#include - -#define PIN_BASE NR_AIC_IRQS - -#define MAX_GPIO_BANKS 5 - -/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ - -#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) -#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) -#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) -#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) -#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) -#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) -#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) -#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) -#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) -#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) -#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) -#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) -#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) -#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) -#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) -#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) -#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) -#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) -#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) -#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) -#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) -#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) -#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) -#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) -#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) -#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) -#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) -#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) -#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) -#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) -#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) -#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) - -#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) -#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) -#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) -#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) -#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) -#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) -#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) -#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) -#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) -#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) -#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) -#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) -#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) -#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) -#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) -#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) -#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) -#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) -#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) -#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) -#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) -#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) -#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) -#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) -#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) -#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) -#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) -#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) -#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) -#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) -#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) -#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) - -#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) -#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) -#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) -#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) -#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) -#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) -#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) -#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) -#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) -#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) -#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) -#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) -#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) -#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) -#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) -#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) -#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) -#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) -#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) -#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) -#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) -#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) -#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) -#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) -#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) -#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) -#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) -#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) -#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) -#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) -#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) -#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) - -#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) -#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) -#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) -#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) -#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) -#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) -#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) -#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) -#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) -#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) -#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) -#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) -#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) -#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) -#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) -#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) -#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) -#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) -#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) -#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) -#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) -#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) -#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) -#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) -#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) -#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) -#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) -#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) -#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) -#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) -#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) -#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) - -#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) -#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) -#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) -#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) -#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) -#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) -#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) -#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) -#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) -#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) -#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) -#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) -#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) -#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) -#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) -#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) -#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) -#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) -#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) -#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) -#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) -#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) -#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) -#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) -#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) -#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) -#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) -#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) -#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) -#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) -#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) -#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) - -#ifndef __ASSEMBLY__ -/* setup setup routines, called from board init or driver probe() */ -extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup); -extern int __init_or_module at91_set_gpio_output(unsigned pin, int value); -extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on); -extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on); - -/* callable at any time */ -extern int at91_set_gpio_value(unsigned pin, int value); -extern int at91_get_gpio_value(unsigned pin); - -/* callable only from core power-management code */ -extern void at91_gpio_suspend(void); -extern void at91_gpio_resume(void); - -/*-------------------------------------------------------------------------*/ - -/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should - * eventually be removed (along with this errno.h inclusion), and the - * gpio request/free calls should probably be implemented. - */ - -#include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - -static inline int gpio_get_value(unsigned gpio) -{ - return at91_get_gpio_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - at91_set_gpio_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -#endif /* __ASSEMBLY__ */ - -#endif diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h deleted file mode 100644 index 016a3a3f6633..000000000000 --- a/include/asm-arm/arch-at91/hardware.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-arm/arch-at91/hardware.h - * - * Copyright (C) 2003 SAN People - * Copyright (C) 2003 ATMEL - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -#if defined(CONFIG_ARCH_AT91RM9200) -#include -#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#include -#elif defined(CONFIG_ARCH_AT91SAM9261) -#include -#elif defined(CONFIG_ARCH_AT91SAM9263) -#include -#elif defined(CONFIG_ARCH_AT91SAM9RL) -#include -#elif defined(CONFIG_ARCH_AT91CAP9) -#include -#elif defined(CONFIG_ARCH_AT91X40) -#include -#else -#error "Unsupported AT91 processor" -#endif - - -#ifdef CONFIG_MMU -/* - * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF - * to 0xFEF78000 .. 0xFF000000. (544Kb) - */ -#define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) -#else -/* - * Identity mapping for the non MMU case. - */ -#define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE -#endif - -#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) - - /* Convert a physical IO address to virtual IO address */ -#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE) - -/* - * Virtual to Physical Address mapping for IO devices. - */ -#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) - - /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_MAX SZ_1M -#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX) - -/* Serial ports */ -#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */ - -/* External Memory Map */ -#define AT91_CHIPSELECT_0 0x10000000 -#define AT91_CHIPSELECT_1 0x20000000 -#define AT91_CHIPSELECT_2 0x30000000 -#define AT91_CHIPSELECT_3 0x40000000 -#define AT91_CHIPSELECT_4 0x50000000 -#define AT91_CHIPSELECT_5 0x60000000 -#define AT91_CHIPSELECT_6 0x70000000 -#define AT91_CHIPSELECT_7 0x80000000 - -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - -/* Clocks */ -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - - -#endif diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h deleted file mode 100644 index f8beaa228467..000000000000 --- a/include/asm-arm/arch-at91/io.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-at91/io.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xFFFFFFFF - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - - -#ifndef __ASSEMBLY__ - -static inline unsigned int at91_sys_read(unsigned int reg_offset) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - return __raw_readl(addr + reg_offset); -} - -static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) -{ - void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; - - __raw_writel(value, addr + reg_offset); -} - -#endif - -#endif diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h deleted file mode 100644 index 70b1216dce5d..000000000000 --- a/include/asm-arm/arch-at91/irqs.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-at91/irqs.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include -#include - -#define NR_AIC_IRQS 32 - - -/* - * Acknowledge interrupt with AIC after interrupt has been handled. - * (by kernel/irq.c) - */ -#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0) - - -/* - * IRQ interrupt symbols are the AT91xxx_ID_* symbols - * for IRQs handled directly through the AIC, or else the AT91_PIN_* - * symbols in gpio.h for ones handled indirectly as GPIOs. - * We make provision for 5 banks of GPIO. - */ -#define NR_IRQS (NR_AIC_IRQS + (5 * 32)) - -/* FIQ is AIC source 0. */ -#define FIQ_START AT91_ID_FIQ - -#endif diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h deleted file mode 100644 index 904fbd60f0e4..000000000000 --- a/include/asm-arm/arch-at91/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-at91/memory.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -#define PHYS_OFFSET (AT91_SDRAM_BASE) - - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h deleted file mode 100644 index c5e3d0357263..000000000000 --- a/include/asm-arm/arch-at91/system.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-at91/system.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * Disable the processor clock. The processor will be automatically - * re-enabled by an interrupt or by a reset. - */ -// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); - - /* - * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Unlike disabling the processor clock via the PMC (above) - * this allows the processor to be woken via JTAG. - */ - cpu_do_idle(); -} - -void (*at91_arch_reset)(void); - -static inline void arch_reset(char mode) -{ - /* call the CPU-specific reset function */ - if (at91_arch_reset) - (at91_arch_reset)(); -} - -#endif diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h deleted file mode 100644 index 67c86a89828f..000000000000 --- a/include/asm-arm/arch-at91/timex.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * include/asm-arm/arch-at91/timex.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#include - -#if defined(CONFIG_ARCH_AT91RM9200) - -#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) - -#elif defined(CONFIG_ARCH_AT91SAM9260) - -#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99300000 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9261) - -#define AT91SAM9_MASTER_CLOCK 99300000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9263) - -#if defined(CONFIG_MACH_USB_A9263) -#define AT91SAM9_MASTER_CLOCK 90000000 -#else -#define AT91SAM9_MASTER_CLOCK 99959500 -#endif - -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9RL) - -#define AT91SAM9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91SAM9G20) - -#define AT91SAM9_MASTER_CLOCK 132096000 -#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91CAP9) - -#define AT91CAP9_MASTER_CLOCK 100000000 -#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16) - -#elif defined(CONFIG_ARCH_AT91X40) - -#define AT91X40_MASTER_CLOCK 40000000 -#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) - -#endif - -#endif diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h deleted file mode 100644 index f5636a8f6132..000000000000 --- a/include/asm-arm/arch-at91/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-arm/arch-at91/uncompress.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -#if defined(CONFIG_AT91_EARLY_DBGU) -#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS) -#elif defined(CONFIG_AT91_EARLY_USART0) -#define UART_OFFSET AT91_USART0 -#elif defined(CONFIG_AT91_EARLY_USART1) -#define UART_OFFSET AT91_USART1 -#elif defined(CONFIG_AT91_EARLY_USART2) -#define UART_OFFSET AT91_USART2 -#elif defined(CONFIG_AT91_EARLY_USART3) -#define UART_OFFSET AT91_USART3 -#elif defined(CONFIG_AT91_EARLY_USART4) -#define UART_OFFSET AT91_USART4 -#elif defined(CONFIG_AT91_EARLY_USART5) -#define UART_OFFSET AT91_USART5 -#endif - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY)) - barrier(); - __raw_writel(c, sys + ATMEL_US_THR); -#endif -} - -static inline void flush(void) -{ -#ifdef UART_OFFSET - void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */ - - /* wait for transmission to complete */ - while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY)) - barrier(); -#endif -} - -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h deleted file mode 100644 index bb05e70e932a..000000000000 --- a/include/asm-arm/arch-at91/vmalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-at91/vmalloc.h - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK) - -#endif diff --git a/include/asm-arm/arch-cl7500/acornfb.h b/include/asm-arm/arch-cl7500/acornfb.h deleted file mode 100644 index aea6330c9745..000000000000 --- a/include/asm-arm/arch-cl7500/acornfb.h +++ /dev/null @@ -1,33 +0,0 @@ -#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119) - -static inline void -acornfb_vidc20_find_rates(struct vidc_timing *vidc, - struct fb_var_screeninfo *var) -{ - u_int bandwidth; - - vidc->control |= VIDC20_CTRL_PIX_CK; - - /* Calculate bandwidth */ - bandwidth = var->pixclock * 8 / var->bits_per_pixel; - - /* Encode bandwidth as VIDC20 setting */ - if (bandwidth > 16667*2) - vidc->control |= VIDC20_CTRL_FIFO_16; - else if (bandwidth > 13333*2) - vidc->control |= VIDC20_CTRL_FIFO_20; - else if (bandwidth > 11111*2) - vidc->control |= VIDC20_CTRL_FIFO_24; - else - vidc->control |= VIDC20_CTRL_FIFO_28; - - vidc->pll_ctl = 0x2020; -} - -#ifdef CONFIG_CHRONTEL_7003 -#define acornfb_default_control() VIDC20_CTRL_PIX_HCLK -#else -#define acornfb_default_control() VIDC20_CTRL_PIX_VCLK -#endif - -#define acornfb_default_econtrol() VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S deleted file mode 100644 index 9a2b67d24098..000000000000 --- a/include/asm-arm/arch-cl7500/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-cl7500/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mov \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000be0 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-cl7500/dma.h b/include/asm-arm/arch-cl7500/dma.h deleted file mode 100644 index 591ed2551892..000000000000 --- a/include/asm-arm/arch-cl7500/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/dma.h - * - * Copyright (C) 1999 Nexus Electronics Ltd. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* DMA is not yet implemented! It should be the same as acorn, copy over.. */ - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#define DMA_S0 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-cl7500/entry-macro.S b/include/asm-arm/arch-cl7500/entry-macro.S deleted file mode 100644 index 5bd55557ccca..000000000000 --- a/include/asm-arm/arch-cl7500/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include - - .equ ioc_base_high, IOC_BASE & 0xff000000 - .equ ioc_base_low, IOC_BASE & 0x00ff0000 - - .macro get_irqnr_preamble, base, tmp - mov \base, #ioc_base_high @ point at IOC - .if ioc_base_low - orr \base, \base, #ioc_base_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/include/asm-arm/arch-cl7500/hardware.h b/include/asm-arm/arch-cl7500/hardware.h deleted file mode 100644 index 1adfd18e6154..000000000000 --- a/include/asm-arm/arch-cl7500/hardware.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/hardware.h - * - * Copyright (C) 1996-1999 Russell King. - * Copyright (C) 1999 Nexus Electronics Ltd. - * - * This file contains the hardware definitions of the - * CL7500 evaluation board. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -#ifdef __ASSEMBLY__ -#define IOMEM(x) x -#else -#define IOMEM(x) ((void __iomem *)(x)) -#endif - -/* - * What hardware must be present - */ -#define HAS_IOMD -#define HAS_VIDC20 - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ - -#define IO_START 0x03000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE IOMEM(0xe0000000) - -#define ISA_START 0x0c000000 /* ISA */ -#define ISA_SIZE 0x00010000 -#define ISA_BASE 0xe1000000 - -#define FLASH_START 0x01000000 /* XXX */ -#define FLASH_SIZE 0x01000000 -#define FLASH_BASE 0xe2000000 - -#define LED_START 0x0302B000 -#define LED_SIZE 0x00001000 -#define LED_BASE 0xe3000000 -#define LED_ADDRESS (LED_BASE + 0xa00) - -/* Let's define SCREEN_START for CL7500, even though it's a lie. */ -#define SCREEN_START 0x02000000 /* VRAM */ -#define SCREEN_END 0xdfc00000 -#define SCREEN_BASE 0xdf800000 - -#define VIDC_BASE (void __iomem *)0xe0400000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) -#define PCIO_BASE IOMEM(0xe0010000) - -#define vidc_writel(val) __raw_writel(val, VIDC_BASE) - -/* in/out bias for the ISA slot region */ -#define ISASLOT_IO 0x80400000 - -#endif diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h deleted file mode 100644 index 80f9b19cac9e..000000000000 --- a/include/asm-arm/arch-cl7500/io.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/io.h - * from linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * GCC is totally crap at loading/storing data. We try to persuade it - * to do the right thing by using these whereever possible instead of - * the above. - */ -#define __arch_base_getb(b,o) \ - ({ \ - unsigned int v, r = (b); \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2]" \ - : "=r" (v) \ - : "r" (r), "Ir" (o)); \ - v; \ - }) - -#define __arch_base_getl(b,o) \ - ({ \ - unsigned int v, r = (b); \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2]" \ - : "=r" (v) \ - : "r" (r), "Ir" (o)); \ - v; \ - }) - -#define __arch_base_putb(v,b,o) \ - ({ \ - unsigned int r = (b); \ - __asm__ __volatile__( \ - "strb %0, [%1, %2]" \ - : \ - : "r" (v), "r" (r), "Ir" (o)); \ - }) - -#define __arch_base_putl(v,b,o) \ - ({ \ - unsigned int r = (b); \ - __asm__ __volatile__( \ - "str %0, [%1, %2]" \ - : \ - : "r" (v), "r" (r), "Ir" (o)); \ - }) - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline unsigned int __ioaddr (unsigned int port) \ -{ \ - if (__PORT_PCIO(port)) \ - return (unsigned int)(PCIO_BASE + (port << 2)); \ - else \ - return (unsigned int)(IO_BASE + (port << 2)); \ -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __ioaddrc(port) \ - (__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2)) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-cl7500/irq.h b/include/asm-arm/arch-cl7500/irq.h deleted file mode 100644 index 4b286331f3f8..000000000000 --- a/include/asm-arm/arch-cl7500/irq.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-cl7500/irq.h - * - * Copyright (C) 1996 Russell King - * Copyright (C) 1999, 2001 Nexus Electronics Ltd. - * - * Changelog: - * 10-10-1996 RMK Brought up to date with arch-sa110eval - * 22-08-1998 RMK Restructured IRQ routines - * 11-08-1999 PJB Created ARM7500 version, derived from RiscPC code - */ - -#include -#include - -static inline int fixup_irq(unsigned int irq) -{ - if (irq == IRQ_ISA) { - int isabits = *((volatile unsigned int *)0xe002b700); - if (isabits == 0) { - printk("Spurious ISA IRQ!\n"); - return irq; - } - irq = IRQ_ISA_BASE; - while (!(isabits & 1)) { - irq++; - isabits >>= 1; - } - } - - return irq; -} diff --git a/include/asm-arm/arch-cl7500/irqs.h b/include/asm-arm/arch-cl7500/irqs.h deleted file mode 100644 index f20996eadf19..000000000000 --- a/include/asm-arm/arch-cl7500/irqs.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/irqs.h - * - * Copyright (C) 1999 Nexus Electronics Ltd - */ - -#define IRQ_INT2 0 -#define IRQ_INT1 2 -#define IRQ_VSYNCPULSE 3 -#define IRQ_POWERON 4 -#define IRQ_TIMER0 5 -#define IRQ_TIMER1 6 -#define IRQ_FORCE 7 -#define IRQ_INT8 8 -#define IRQ_ISA 9 -#define IRQ_INT6 10 -#define IRQ_INT5 11 -#define IRQ_INT4 12 -#define IRQ_INT3 13 -#define IRQ_KEYBOARDTX 14 -#define IRQ_KEYBOARDRX 15 - -#define IRQ_DMA0 16 -#define IRQ_DMA1 17 -#define IRQ_DMA2 18 -#define IRQ_DMA3 19 -#define IRQ_DMAS0 20 -#define IRQ_DMAS1 21 - -#define IRQ_IOP0 24 -#define IRQ_IOP1 25 -#define IRQ_IOP2 26 -#define IRQ_IOP3 27 -#define IRQ_IOP4 28 -#define IRQ_IOP5 29 -#define IRQ_IOP6 30 -#define IRQ_IOP7 31 - -#define IRQ_MOUSERX 40 -#define IRQ_MOUSETX 41 -#define IRQ_ADC 42 -#define IRQ_EVENT1 43 -#define IRQ_EVENT2 44 - -#define IRQ_ISA_BASE 48 -#define IRQ_ISA_3 48 -#define IRQ_ISA_4 49 -#define IRQ_ISA_5 50 -#define IRQ_ISA_7 51 -#define IRQ_ISA_9 52 -#define IRQ_ISA_10 53 -#define IRQ_ISA_11 54 -#define IRQ_ISA_14 55 - -#define FIQ_INT9 0 -#define FIQ_INT5 1 -#define FIQ_INT6 4 -#define FIQ_INT8 6 -#define FIQ_FORCE 7 - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 - -#define IRQ_TIMER IRQ_TIMER0 diff --git a/include/asm-arm/arch-cl7500/memory.h b/include/asm-arm/arch-cl7500/memory.h deleted file mode 100644 index 3178140e24ca..000000000000 --- a/include/asm-arm/arch-cl7500/memory.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/memory.h - * - * Copyright (c) 1996,1997,1998 Russell King. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 11-Jan-1998 RMK Uninlined to reduce hits on cache - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Added TASK_SIZE and PAGE_OFFSET - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x10000000) - -/* - * These are exactly the same on the RiscPC as the - * physical memory view. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x00000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-cl7500/system.h b/include/asm-arm/arch-cl7500/system.h deleted file mode 100644 index a9505d6a74d7..000000000000 --- a/include/asm-arm/arch-cl7500/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/system.h - * - * Copyright (c) 1999 Nexus Electronics Ltd. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - iomd_writeb(0, IOMD_SUSMODE); -} - -#define arch_reset(mode) \ - do { \ - iomd_writeb(0, IOMD_ROMCR0); \ - cpu_reset(0); \ - } while (0) - -#endif diff --git a/include/asm-arm/arch-cl7500/timex.h b/include/asm-arm/arch-cl7500/timex.h deleted file mode 100644 index 8a4175fc0106..000000000000 --- a/include/asm-arm/arch-cl7500/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/timex.h - * - * CL7500 architecture timex specifications - * - * Copyright (C) 1999 Nexus Electronics Ltd - */ - -/* - * On the ARM7500, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h deleted file mode 100644 index c437e0c88c3f..000000000000 --- a/include/asm-arm/arch-cl7500/uncompress.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/uncompress.h - * - * Copyright (C) 1999, 2000 Nexus Electronics Ltd. - */ -#define BASE 0x03010000 -#define SERBASE (BASE + (0x2f8 << 2)) - -static inline void putc(char c) -{ - while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)) - barrier(); - - *((volatile unsigned int *)(SERBASE)) = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void arch_decomp_setup(void) -{ - int baud = 3686400 / (9600 * 32); - - *((volatile unsigned int *)(SERBASE + 0xC)) = 0x80; - *((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff; - *((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8; - *((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */ - *((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */ -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-cl7500/vmalloc.h b/include/asm-arm/arch-cl7500/vmalloc.h deleted file mode 100644 index ba8d7a84456a..000000000000 --- a/include/asm-arm/arch-cl7500/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-cl7500/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) diff --git a/include/asm-arm/arch-clps711x/autcpu12.h b/include/asm-arm/arch-clps711x/autcpu12.h deleted file mode 100644 index 1588a365f610..000000000000 --- a/include/asm-arm/arch-clps711x/autcpu12.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * AUTCPU12 specific defines - * - * (c) 2001 Thomas Gleixner, autronix automation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_AUTCPU12_H -#define __ASM_ARCH_AUTCPU12_H - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ - -/* - * The flash bank is wired to chip select 0 - */ -#define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */ - -/* offset for device specific information structure */ -#define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ -#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) - -/* -* All special IO's are tied to CS1 -*/ -#define AUTCPU12_PHYS_CHAR_LCD CS1_PHYS_BASE +0x00000000 /* physical */ - -#define AUTCPU12_PHYS_NVRAM CS1_PHYS_BASE +0x02000000 /* physical */ - -#define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */ - -#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */ - -#define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */ - -#define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */ - -#define AUTCPU12_PHYS_IO CS1_PHYS_BASE +0x0C000000 /* physical */ - -#define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */ - -/* -* defines for smartmedia card access -*/ -#define AUTCPU12_SMC_RDY (1<<2) -#define AUTCPU12_SMC_ALE (1<<3) -#define AUTCPU12_SMC_CLE (1<<4) -#define AUTCPU12_SMC_PORT_OFFSET PBDR -#define AUTCPU12_SMC_SELECT_OFFSET 0x10 -/* -* defines for lcd contrast -*/ -#define AUTCPU12_DPOT_PORT_OFFSET PEDR -#define AUTCPU12_DPOT_CS (1<<0) -#define AUTCPU12_DPOT_CLK (1<<1) -#define AUTCPU12_DPOT_UD (1<<2) - -#endif diff --git a/include/asm-arm/arch-clps711x/debug-macro.S b/include/asm-arm/arch-clps711x/debug-macro.S deleted file mode 100644 index bc0a5760722b..000000000000 --- a/include/asm-arm/arch-clps711x/debug-macro.S +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/include/asm-arm/arch-clps711x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #CLPS7111_PHYS_BASE - movne \rx, #CLPS7111_VIRT_BASE -#ifndef CONFIG_DEBUG_CLPS711X_UART2 - add \rx, \rx, #0x0000 @ UART1 -#else - add \rx, \rx, #0x1000 @ UART2 -#endif - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0480] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 11 @ UBUSYx - bne 1001b - .endm - - .macro busyuart,rd,rx - tst \rx, #0x1000 @ UART2 does not have CTS here - bne 1002f -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 8 @ CTS - bne 1001b -1002: - .endm - diff --git a/include/asm-arm/arch-clps711x/dma.h b/include/asm-arm/arch-clps711x/dma.h deleted file mode 100644 index 610997938423..000000000000 --- a/include/asm-arm/arch-clps711x/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-clps711x/entry-macro.S b/include/asm-arm/arch-clps711x/entry-macro.S deleted file mode 100644 index 3554887cbccb..000000000000 --- a/include/asm-arm/arch-clps711x/entry-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * include/asm-arm/arch-clps711x/entry-macro.S - * - * Low-level IRQ helper macros for CLPS711X-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1) -#error INTSR stride != INTMR stride -#endif - - .macro get_irqnr_and_base, irqnr, stat, base, mask - mov \base, #CLPS7111_BASE - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #4 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - movs \stat, \stat, lsr #4 - bne 1001f - - add \base, \base, #INTSR2 - INTSR1 - ldr \stat, [\base, #INTSR1] - ldr \mask, [\base, #INTMR1] - mov \irqnr, #16 - mov \mask, \mask, lsl #16 - and \stat, \stat, \mask, lsr #16 - -1001: tst \stat, #255 - addeq \irqnr, \irqnr, #8 - moveq \stat, \stat, lsr #8 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - - diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h deleted file mode 100644 index 0fdbe72fff2a..000000000000 --- a/include/asm-arm/arch-clps711x/hardware.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/hardware.h - * - * This file contains the hardware definitions of the Prospector P720T. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - - -#define CLPS7111_VIRT_BASE 0xff000000 -#define CLPS7111_BASE CLPS7111_VIRT_BASE - -/* - * The physical addresses that the external chip select signals map to is - * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212 - * processors. CONFIG_EP72XX_BOOT_ROM is only available if these - * processors are in use. - */ -#ifndef CONFIG_EP72XX_ROM_BOOT -#define CS0_PHYS_BASE (0x00000000) -#define CS1_PHYS_BASE (0x10000000) -#define CS2_PHYS_BASE (0x20000000) -#define CS3_PHYS_BASE (0x30000000) -#define CS4_PHYS_BASE (0x40000000) -#define CS5_PHYS_BASE (0x50000000) -#define CS6_PHYS_BASE (0x60000000) -#define CS7_PHYS_BASE (0x70000000) -#else -#define CS0_PHYS_BASE (0x70000000) -#define CS1_PHYS_BASE (0x60000000) -#define CS2_PHYS_BASE (0x50000000) -#define CS3_PHYS_BASE (0x40000000) -#define CS4_PHYS_BASE (0x30000000) -#define CS5_PHYS_BASE (0x20000000) -#define CS6_PHYS_BASE (0x10000000) -#define CS7_PHYS_BASE (0x00000000) -#endif - -#if defined (CONFIG_ARCH_EP7211) - -#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7211_BASE CLPS7111_VIRT_BASE -#include - -#elif defined (CONFIG_ARCH_EP7212) - -#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE -#define EP7212_BASE CLPS7111_VIRT_BASE -#include - -#endif - -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - -#ifndef __ASSEMBLER__ - -#define PCIO_BASE IO_BASE - -#endif - - -#if defined (CONFIG_ARCH_AUTCPU12) - -#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE -#define CS89712_BASE CLPS7111_VIRT_BASE - -#include -#include -#include - -#endif - - -#if defined (CONFIG_ARCH_CDB89712) - -#include -#include -#include - -/* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - -/* static cdb89712_map_io() areas */ -#define REGISTER_START 0x80000000 -#define REGISTER_SIZE 0x4000 -#define REGISTER_BASE 0xff000000 - -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 - -#endif - - -#if defined (CONFIG_ARCH_EDB7211) - -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ - -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ - - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ - -#endif /* CONFIG_ARCH_EDB7211 */ - - -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the EDB7211. - */ -#define EDB_PD1_LCD_DC_DC_EN (1<<1) -#define EDB_PD2_LCDEN (1<<2) -#define EDB_PD3_LCDBL (1<<3) - - -#if defined (CONFIG_ARCH_CEIVA) - -#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE -#define CEIVA_BASE CLPS7111_VIRT_BASE - -#include -#include - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */ - -#define CEIVA_FLASH_SIZE 0x100000 -#define CEIVA_FLASH_WIDTH 2 - -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - -/* - * SED1355 LCD controller - */ -#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE -#define CEIVA_VIRT_SED1355 (0xfc000000) - -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the Ceiva Photo Max, and reset to the LCD controller. - */ - -// Reset line to SED1355 (must be high to operate) -#define CEIVA_PD1_LCDRST (1<<1) -// LCD panel enable (set to one, to enable LCD) -#define CEIVA_PD4_LCDEN (1<<4) -// Backlight (set to one, to turn on backlight -#define CEIVA_PD5_LCDBL (1<<5) - -/* - * Relevant bits in port B, which report the status of the buttons. - */ - -// White button -#define CEIVA_PB4_WHT_BTN (1<<4) -// Black button -#define CEIVA_PB0_BLK_BTN (1<<0) -#endif // #if defined (CONFIG_ARCH_CEIVA) - -#endif diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h deleted file mode 100644 index 2b84dac8b2fa..000000000000 --- a/include/asm-arm/arch-clps711x/io.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -/* - * We don't support ins[lb]/outs[lb]. Make them fault. - */ -#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0) -#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0) - -#endif diff --git a/include/asm-arm/arch-clps711x/irqs.h b/include/asm-arm/arch-clps711x/irqs.h deleted file mode 100644 index 76025dc87637..000000000000 --- a/include/asm-arm/arch-clps711x/irqs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/irqs.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupts from INTSR1 - */ -#define IRQ_CSINT 4 -#define IRQ_EINT1 5 -#define IRQ_EINT2 6 -#define IRQ_EINT3 7 -#define IRQ_TC1OI 8 -#define IRQ_TC2OI 9 -#define IRQ_RTCMI 10 -#define IRQ_TINT 11 -#define IRQ_UTXINT1 12 -#define IRQ_URXINT1 13 -#define IRQ_UMSINT 14 -#define IRQ_SSEOTI 15 - -#define INT1_IRQS (0x0000fff0) -#define INT1_ACK_IRQS (0x00004f10) - -/* - * Interrupts from INTSR2 - */ -#define IRQ_KBDINT (16+0) /* bit 0 */ -#define IRQ_SS2RX (16+1) /* bit 1 */ -#define IRQ_SS2TX (16+2) /* bit 2 */ -#define IRQ_UTXINT2 (16+12) /* bit 12 */ -#define IRQ_URXINT2 (16+13) /* bit 13 */ - -#define INT2_IRQS (0x30070000) -#define INT2_ACK_IRQS (0x00010000) - -#define NR_IRQS 30 - diff --git a/include/asm-arm/arch-clps711x/memory.h b/include/asm-arm/arch-clps711x/memory.h deleted file mode 100644 index 42768cc8bfb4..000000000000 --- a/include/asm-arm/arch-clps711x/memory.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xc0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -#if defined(CONFIG_ARCH_CDB89712) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#elif defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#else - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - -/* - * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 - * uses only one of the two banks (bank #1). However, even within - * bank #1, memory is discontiguous. - * - * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between - * them, so we use 24 for the node max shift to get 16MB node sizes. - */ - -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ -#define NODE_MEM_SIZE_BITS 24 - -#endif - diff --git a/include/asm-arm/arch-clps711x/syspld.h b/include/asm-arm/arch-clps711x/syspld.h deleted file mode 100644 index 960578a22a8e..000000000000 --- a/include/asm-arm/arch-clps711x/syspld.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/syspld.h - * - * System Control PLD register definitions. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSPLD_H -#define __ASM_ARCH_SYSPLD_H - -#define SYSPLD_PHYS_BASE (0x10000000) - -#ifndef __ASSEMBLY__ -#include - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif - -#define PLD_INT SYSPLD_REG(u32, 0x000000) -#define PLD_INT_PENIRQ (1 << 5) -#define PLD_INT_UCB_IRQ (1 << 1) -#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */ - -#define PLD_PWR SYSPLD_REG(u32, 0x000004) -#define PLD_PWR_EXT (1 << 5) -#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */ -#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */ -#define PLD_S3_ON (1 << 2) /* LCD backlight enable */ -#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */ -#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */ - -#define PLD_KBD SYSPLD_REG(u32, 0x000008) -#define PLD_KBD_WAKE (1 << 1) -#define PLD_KBD_EN (1 << 0) - -#define PLD_SPI SYSPLD_REG(u32, 0x00000c) -#define PLD_SPI_EN (1 << 0) - -#define PLD_IO SYSPLD_REG(u32, 0x000010) -#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */ -#define PLD_IO_USER (1 << 5) /* user defined switch */ -#define PLD_IO_LED3 (1 << 4) -#define PLD_IO_LED2 (1 << 3) -#define PLD_IO_LED1 (1 << 2) -#define PLD_IO_LED0 (1 << 1) -#define PLD_IO_LEDEN (1 << 0) - -#define PLD_IRDA SYSPLD_REG(u32, 0x000014) -#define PLD_IRDA_EN (1 << 0) - -#define PLD_COM2 SYSPLD_REG(u32, 0x000018) -#define PLD_COM2_EN (1 << 0) - -#define PLD_COM1 SYSPLD_REG(u32, 0x00001c) -#define PLD_COM1_EN (1 << 0) - -#define PLD_AUD SYSPLD_REG(u32, 0x000020) -#define PLD_AUD_DIV1 (1 << 6) -#define PLD_AUD_DIV0 (1 << 5) -#define PLD_AUD_CLK_SEL1 (1 << 4) -#define PLD_AUD_CLK_SEL0 (1 << 3) -#define PLD_AUD_MIC_PWR (1 << 2) -#define PLD_AUD_MIC_GAIN (1 << 1) -#define PLD_AUD_CODEC_EN (1 << 0) - -#define PLD_CF SYSPLD_REG(u32, 0x000024) -#define PLD_CF2_SLEEP (1 << 5) -#define PLD_CF1_SLEEP (1 << 4) -#define PLD_CF2_nPDREQ (1 << 3) -#define PLD_CF1_nPDREQ (1 << 2) -#define PLD_CF2_nIRQ (1 << 1) -#define PLD_CF1_nIRQ (1 << 0) - -#define PLD_SDC SYSPLD_REG(u32, 0x000028) -#define PLD_SDC_INT_EN (1 << 2) -#define PLD_SDC_WP (1 << 1) -#define PLD_SDC_CD (1 << 0) - -#define PLD_FPGA SYSPLD_REG(u32, 0x00002c) - -#define PLD_CODEC SYSPLD_REG(u32, 0x400000) -#define PLD_CODEC_IRQ3 (1 << 4) -#define PLD_CODEC_IRQ2 (1 << 3) -#define PLD_CODEC_IRQ1 (1 << 2) -#define PLD_CODEC_EN (1 << 0) - -#define PLD_BRITE SYSPLD_REG(u32, 0x400004) -#define PLD_BRITE_UP (1 << 1) -#define PLD_BRITE_DN (1 << 0) - -#define PLD_LCDEN SYSPLD_REG(u32, 0x400008) -#define PLD_LCDEN_EN (1 << 0) - -#define PLD_ID SYSPLD_REG(u32, 0x40000c) - -#define PLD_TCH SYSPLD_REG(u32, 0x400010) -#define PLD_TCH_PENIRQ (1 << 1) -#define PLD_TCH_EN (1 << 0) - -#define PLD_GPIO SYSPLD_REG(u32, 0x400014) -#define PLD_GPIO2 (1 << 2) -#define PLD_GPIO1 (1 << 1) -#define PLD_GPIO0 (1 << 0) - -#endif diff --git a/include/asm-arm/arch-clps711x/system.h b/include/asm-arm/arch-clps711x/system.h deleted file mode 100644 index 1f561772bee4..000000000000 --- a/include/asm-arm/arch-clps711x/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/system.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - clps_writel(1, HALT); - __asm__ __volatile__( - "mov r0, r0\n\ - mov r0, r0"); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-clps711x/time.h b/include/asm-arm/arch-clps711x/time.h deleted file mode 100644 index 5edaae1c61d3..000000000000 --- a/include/asm-arm/arch-clps711x/time.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/time.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -extern void clps711x_setup_timer(void); - -/* - * IRQ handler for the timer - */ -static irqreturn_t -p720t_timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_leds(); - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - clps711x_setup_timer(); - timer_irq.handler = p720t_timer_interrupt; - setup_irq(IRQ_TC2OI, &timer_irq); -} diff --git a/include/asm-arm/arch-clps711x/timex.h b/include/asm-arm/arch-clps711x/timex.h deleted file mode 100644 index dcbb381da3dd..000000000000 --- a/include/asm-arm/arch-clps711x/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/timex.h - * - * Prospector 720T architecture timex specifications - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 512000 diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h deleted file mode 100644 index 8c5684ad086e..000000000000 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/uncompress.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#undef CLPS7111_BASE -#define CLPS7111_BASE CLPS7111_PHYS_BASE - -#define __raw_readl(p) (*(unsigned long *)(p)) -#define __raw_writel(v,p) (*(unsigned long *)(p) = (v)) - -#ifdef CONFIG_DEBUG_CLPS711X_UART2 -#define SYSFLGx SYSFLG2 -#define UARTDRx UARTDR2 -#else -#define SYSFLGx SYSFLG1 -#define UARTDRx UARTDR1 -#endif - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel(c, UARTDRx); -} - -static inline void flush(void) -{ - while (clps_readl(SYSFLGx) & SYSFLG_UBUSY) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-clps711x/vmalloc.h b/include/asm-arm/arch-clps711x/vmalloc.h deleted file mode 100644 index a5dfe96abc96..000000000000 --- a/include/asm-arm/arch-clps711x/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-clps711x/vmalloc.h - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-davinci/clock.h b/include/asm-arm/arch-davinci/clock.h deleted file mode 100644 index cc168b7a14f2..000000000000 --- a/include/asm-arm/arch-davinci/clock.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-davinci/clock.h - * - * Clock control driver for DaVinci - header file - * - * Authors: Vladimir Barinov - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DAVINCI_CLOCK_H -#define __ASM_ARCH_DAVINCI_CLOCK_H - -struct clk; - -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); -extern int davinci_clk_init(void); - -#endif diff --git a/include/asm-arm/arch-davinci/common.h b/include/asm-arm/arch-davinci/common.h deleted file mode 100644 index a97dfbb15e57..000000000000 --- a/include/asm-arm/arch-davinci/common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Header for code common to all DaVinci machines. - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H -#define __ARCH_ARM_MACH_DAVINCI_COMMON_H - -struct sys_timer; - -extern struct sys_timer davinci_timer; - -#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/include/asm-arm/arch-davinci/debug-macro.S b/include/asm-arm/arch-davinci/debug-macro.S deleted file mode 100644 index e6c0f0d5d062..000000000000 --- a/include/asm-arm/arch-davinci/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Debugging macro for DaVinci - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x01000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00c20000 @ UART 0 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-davinci/dma.h b/include/asm-arm/arch-davinci/dma.h deleted file mode 100644 index 8e2f2d0ba667..000000000000 --- a/include/asm-arm/arch-davinci/dma.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * DaVinci DMA definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#define MAX_DMA_ADDRESS 0xffffffff - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-davinci/entry-macro.S b/include/asm-arm/arch-davinci/entry-macro.S deleted file mode 100644 index 3ebfcc5cb58e..000000000000 --- a/include/asm-arm/arch-davinci/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Low-level IRQ helper macros for TI DaVinci-based platforms - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 - sub \irqnr, \tmp, #1 - cmp \tmp, #0 - .endm - - .macro irq_prio_table - .endm diff --git a/include/asm-arm/arch-davinci/gpio.h b/include/asm-arm/arch-davinci/gpio.h deleted file mode 100644 index 54fda734649f..000000000000 --- a/include/asm-arm/arch-davinci/gpio.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include -#include - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are - * used as gpios, not with other peripherals. - * - * GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, and maybe - * for later updates, code should write GPIO(N) or: - * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53) - * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70) - * - * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc - * for now, that's != GPIO(N) - */ -#define GPIO(X) (X) /* 0 <= X <= 70 */ -#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */ -#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */ - -struct gpio_controller { - u32 dir; - u32 out_data; - u32 set_data; - u32 clr_data; - u32 in_data; - u32 set_rising; - u32 clr_rising; - u32 set_falling; - u32 clr_falling; - u32 intstat; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct gpio_controller *__iomem -__gpio_to_controller(unsigned gpio) -{ - void *__iomem ptr; - - if (gpio < 32) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); - else if (gpio < 64) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); - else if (gpio < DAVINCI_N_GPIO) - ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); - else - ptr = NULL; - return ptr; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -/* The get/set/clear functions will inline when called with constant - * parameters, for low-overhead bitbanging. Illegal constant parameters - * cause link-time errors. - * - * Otherwise, calls with variable parameters use outlined functions. - */ -extern int __error_inval_gpio(void); - -extern void __gpio_set(unsigned gpio, int value); -extern int __gpio_get(unsigned gpio); - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value)) { - struct gpio_controller *__iomem g; - u32 mask; - - if (gpio >= DAVINCI_N_GPIO) - __error_inval_gpio(); - - g = __gpio_to_controller(gpio); - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, &g->set_data); - else - __raw_writel(mask, &g->clr_data); - return; - } - - __gpio_set(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs. - * - * NOTE: changes in reported values are synchronized to the GPIO clock. - * This is most easily seen after calling gpio_set_value() and then immediatly - * gpio_get_value(), where the gpio_get_value() would return the old value - * until the GPIO clock ticks and the new value gets latched. - */ - -static inline int gpio_get_value(unsigned gpio) -{ - struct gpio_controller *__iomem g; - - if (!__builtin_constant_p(gpio)) - return __gpio_get(gpio); - - if (gpio >= DAVINCI_N_GPIO) - return __error_inval_gpio(); - - g = __gpio_to_controller(gpio); - return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data)); -} - -/* powerup default direction is IN */ -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - -#include /* cansleep wrappers */ - -extern int gpio_request(unsigned gpio, const char *tag); -extern void gpio_free(unsigned gpio); - -static inline int gpio_to_irq(unsigned gpio) -{ - return DAVINCI_N_AINTC_IRQ + gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - DAVINCI_N_AINTC_IRQ; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h deleted file mode 100644 index a2e8969afaca..000000000000 --- a/include/asm-arm/arch-davinci/hardware.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Common hardware definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * Base register addresses - */ -#define DAVINCI_DMA_3PCC_BASE (0x01C00000) -#define DAVINCI_DMA_3PTC0_BASE (0x01C10000) -#define DAVINCI_DMA_3PTC1_BASE (0x01C10400) -#define DAVINCI_I2C_BASE (0x01C21000) -#define DAVINCI_PWM0_BASE (0x01C22000) -#define DAVINCI_PWM1_BASE (0x01C22400) -#define DAVINCI_PWM2_BASE (0x01C22800) -#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000) -#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800) -#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00) -#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000) -#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000) -#define DAVINCI_IEEE1394_BASE (0x01C60000) -#define DAVINCI_USB_OTG_BASE (0x01C64000) -#define DAVINCI_CFC_ATA_BASE (0x01C66000) -#define DAVINCI_SPI_BASE (0x01C66800) -#define DAVINCI_GPIO_BASE (0x01C67000) -#define DAVINCI_UHPI_BASE (0x01C67800) -#define DAVINCI_VPSS_REGS_BASE (0x01C70000) -#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000) -#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000) -#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000) -#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000) -#define DAVINCI_IMCOP_BASE (0x01CC0000) -#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000) -#define DAVINCI_VLYNQ_BASE (0x01E01000) -#define DAVINCI_MCBSP_BASE (0x01E02000) -#define DAVINCI_MMC_SD_BASE (0x01E10000) -#define DAVINCI_MS_BASE (0x01E20000) -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000) -#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000) -#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000) - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-davinci/i2c.h b/include/asm-arm/arch-davinci/i2c.h deleted file mode 100644 index e2f54168abd1..000000000000 --- a/include/asm-arm/arch-davinci/i2c.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * DaVinci I2C controller platfrom_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency */ - unsigned int bus_delay; /* transaction delay */ -}; - -#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/asm-arm/arch-davinci/io.h b/include/asm-arm/arch-davinci/io.h deleted file mode 100644 index e7accb910864..000000000000 --- a/include/asm-arm/arch-davinci/io.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * DaVinci IO address definitions - * - * Copied from include/asm/arm/arch-omap/io.h - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ -#define IO_PHYS 0x01c00000 -#define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ -#define IO_SIZE 0x00400000 -#define IO_VIRT (IO_PHYS + IO_OFFSET) -#define io_p2v(pa) ((pa) + IO_OFFSET) -#define io_v2p(va) ((va) - IO_OFFSET) -#define IO_ADDRESS(x) io_p2v(x) - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define PCIO_BASE 0 -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -#ifndef __ASSEMBLER__ - -/* - * Functions to access the DaVinci IO region - * - * NOTE: - Use davinci_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define davinci_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define davinci_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define davinci_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) - -#define davinci_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define davinci_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define davinci_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) - -/* 16 bit uses LDRH/STRH, base +/- offset_8 */ -typedef struct { volatile u16 offset[256]; } __regbase16; -#define __REGV16(vaddr) ((__regbase16 *)((vaddr)&~0xff)) \ - ->offset[((vaddr)&0xff)>>1] -#define __REG16(paddr) __REGV16(io_p2v(paddr)) - -/* 8/32 bit uses LDR/STR, base +/- offset_12 */ -typedef struct { volatile u8 offset[4096]; } __regbase8; -#define __REGV8(vaddr) ((__regbase8 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>0] -#define __REG8(paddr) __REGV8(io_p2v(paddr)) - -typedef struct { volatile u32 offset[4096]; } __regbase32; -#define __REGV32(vaddr) ((__regbase32 *)((vaddr)&~4095)) \ - ->offset[((vaddr)&4095)>>2] - -#define __REG(paddr) __REGV32(io_p2v(paddr)) -#else - -#define __REG(x) (*((volatile unsigned long *)io_p2v(x))) - -#endif /* __ASSEMBLER__ */ -#endif /* __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-davinci/irqs.h b/include/asm-arm/arch-davinci/irqs.h deleted file mode 100644 index f4c5ca6da9f4..000000000000 --- a/include/asm-arm/arch-davinci/irqs.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * DaVinci interrupt controller definitions - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* Base address */ -#define DAVINCI_ARM_INTC_BASE 0x01C48000 - -/* Interrupt lines */ -#define IRQ_VDINT0 0 -#define IRQ_VDINT1 1 -#define IRQ_VDINT2 2 -#define IRQ_HISTINT 3 -#define IRQ_H3AINT 4 -#define IRQ_PRVUINT 5 -#define IRQ_RSZINT 6 -#define IRQ_VFOCINT 7 -#define IRQ_VENCINT 8 -#define IRQ_ASQINT 9 -#define IRQ_IMXINT 10 -#define IRQ_VLCDINT 11 -#define IRQ_USBINT 12 -#define IRQ_EMACINT 13 - -#define IRQ_CCINT0 16 -#define IRQ_CCERRINT 17 -#define IRQ_TCERRINT0 18 -#define IRQ_TCERRINT 19 -#define IRQ_PSCIN 20 - -#define IRQ_IDE 22 -#define IRQ_HPIINT 23 -#define IRQ_MBXINT 24 -#define IRQ_MBRINT 25 -#define IRQ_MMCINT 26 -#define IRQ_SDIOINT 27 -#define IRQ_MSINT 28 -#define IRQ_DDRINT 29 -#define IRQ_AEMIFINT 30 -#define IRQ_VLQINT 31 -#define IRQ_TINT0_TINT12 32 -#define IRQ_TINT0_TINT34 33 -#define IRQ_TINT1_TINT12 34 -#define IRQ_TINT1_TINT34 35 -#define IRQ_PWMINT0 36 -#define IRQ_PWMINT1 37 -#define IRQ_PWMINT2 38 -#define IRQ_I2C 39 -#define IRQ_UARTINT0 40 -#define IRQ_UARTINT1 41 -#define IRQ_UARTINT2 42 -#define IRQ_SPINT0 43 -#define IRQ_SPINT1 44 - -#define IRQ_DSP2ARM0 46 -#define IRQ_DSP2ARM1 47 -#define IRQ_GPIO0 48 -#define IRQ_GPIO1 49 -#define IRQ_GPIO2 50 -#define IRQ_GPIO3 51 -#define IRQ_GPIO4 52 -#define IRQ_GPIO5 53 -#define IRQ_GPIO6 54 -#define IRQ_GPIO7 55 -#define IRQ_GPIOBNK0 56 -#define IRQ_GPIOBNK1 57 -#define IRQ_GPIOBNK2 58 -#define IRQ_GPIOBNK3 59 -#define IRQ_GPIOBNK4 60 -#define IRQ_COMMTX 61 -#define IRQ_COMMRX 62 -#define IRQ_EMUINT 63 - -#define DAVINCI_N_AINTC_IRQ 64 -#define DAVINCI_N_GPIO 71 - -#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO) - -#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-davinci/memory.h b/include/asm-arm/arch-davinci/memory.h deleted file mode 100644 index dd1625c23cf4..000000000000 --- a/include/asm-arm/arch-davinci/memory.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * DaVinci memory space definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/************************************************************************** - * Included Files - **************************************************************************/ -#include -#include - -/************************************************************************** - * Definitions - **************************************************************************/ -#define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ - -#define PHYS_OFFSET DAVINCI_DDR_BASE - -/* - * Increase size of DMA-consistent memory region - */ -#define CONSISTENT_DMA_SIZE (14<<20) - -#ifndef __ASSEMBLY__ -/* - * Restrict DMA-able region to workaround silicon bug. The bug - * restricts buffers available for DMA to video hardware to be - * below 128M - */ -static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) -{ - unsigned int sz = (128<<20) >> PAGE_SHIFT; - - if (node != 0) - sz = 0; - - size[1] = size[0] - sz; - size[0] = sz; -} - -#define arch_adjust_zones(node, zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) - -#endif - -/* - * Bus address is physical address - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-davinci/mux.h b/include/asm-arm/arch-davinci/mux.h deleted file mode 100644 index c24b6782804d..000000000000 --- a/include/asm-arm/arch-davinci/mux.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * DaVinci pin multiplexing defines - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define DAVINCI_MUX_AEAW0 0 -#define DAVINCI_MUX_AEAW1 1 -#define DAVINCI_MUX_AEAW2 2 -#define DAVINCI_MUX_AEAW3 3 -#define DAVINCI_MUX_AEAW4 4 -#define DAVINCI_MUX_AECS4 10 -#define DAVINCI_MUX_AECS5 11 -#define DAVINCI_MUX_VLYNQWD0 12 -#define DAVINCI_MUX_VLYNQWD1 13 -#define DAVINCI_MUX_VLSCREN 14 -#define DAVINCI_MUX_VLYNQEN 15 -#define DAVINCI_MUX_HDIREN 16 -#define DAVINCI_MUX_ATAEN 17 -#define DAVINCI_MUX_RGB666 22 -#define DAVINCI_MUX_RGB888 23 -#define DAVINCI_MUX_LOEEN 24 -#define DAVINCI_MUX_LFLDEN 25 -#define DAVINCI_MUX_CWEN 26 -#define DAVINCI_MUX_CFLDEN 27 -#define DAVINCI_MUX_HPIEN 29 -#define DAVINCI_MUX_1394EN 30 -#define DAVINCI_MUX_EMACEN 31 - -#define DAVINCI_MUX_LEVEL2 32 -#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0) -#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1) -#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2) -#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3) -#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4) -#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5) -#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6) -#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7) -#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8) -#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9) -#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10) -#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16) -#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17) -#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18) - -extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable); - -#endif /* __ASM_ARCH_MUX_H */ diff --git a/include/asm-arm/arch-davinci/psc.h b/include/asm-arm/arch-davinci/psc.h deleted file mode 100644 index 4977aa071e1e..000000000000 --- a/include/asm-arm/arch-davinci/psc.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * DaVinci Power & Sleep Controller (PSC) defines - * - * Copyright (C) 2006 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -#ifndef __ASM_ARCH_PSC_H -#define __ASM_ARCH_PSC_H - -/* Power and Sleep Controller (PSC) Domains */ -#define DAVINCI_GPSC_ARMDOMAIN 0 -#define DAVINCI_GPSC_DSPDOMAIN 1 - -#define DAVINCI_LPSC_VPSSMSTR 0 -#define DAVINCI_LPSC_VPSSSLV 1 -#define DAVINCI_LPSC_TPCC 2 -#define DAVINCI_LPSC_TPTC0 3 -#define DAVINCI_LPSC_TPTC1 4 -#define DAVINCI_LPSC_EMAC 5 -#define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_MDIO 7 -#define DAVINCI_LPSC_IEEE1394 8 -#define DAVINCI_LPSC_USB 9 -#define DAVINCI_LPSC_ATA 10 -#define DAVINCI_LPSC_VLYNQ 11 -#define DAVINCI_LPSC_UHPI 12 -#define DAVINCI_LPSC_DDR_EMIF 13 -#define DAVINCI_LPSC_AEMIF 14 -#define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_MEMSTICK 16 -#define DAVINCI_LPSC_McBSP 17 -#define DAVINCI_LPSC_I2C 18 -#define DAVINCI_LPSC_UART0 19 -#define DAVINCI_LPSC_UART1 20 -#define DAVINCI_LPSC_UART2 21 -#define DAVINCI_LPSC_SPI 22 -#define DAVINCI_LPSC_PWM0 23 -#define DAVINCI_LPSC_PWM1 24 -#define DAVINCI_LPSC_PWM2 25 -#define DAVINCI_LPSC_GPIO 26 -#define DAVINCI_LPSC_TIMER0 27 -#define DAVINCI_LPSC_TIMER1 28 -#define DAVINCI_LPSC_TIMER2 29 -#define DAVINCI_LPSC_SYSTEM_SUBSYS 30 -#define DAVINCI_LPSC_ARM 31 -#define DAVINCI_LPSC_SCR2 32 -#define DAVINCI_LPSC_SCR3 33 -#define DAVINCI_LPSC_SCR4 34 -#define DAVINCI_LPSC_CROSSBAR 35 -#define DAVINCI_LPSC_CFG27 36 -#define DAVINCI_LPSC_CFG3 37 -#define DAVINCI_LPSC_CFG5 38 -#define DAVINCI_LPSC_GEM 39 -#define DAVINCI_LPSC_IMCOP 40 - -#endif /* __ASM_ARCH_PSC_H */ diff --git a/include/asm-arm/arch-davinci/serial.h b/include/asm-arm/arch-davinci/serial.h deleted file mode 100644 index ed418ef76805..000000000000 --- a/include/asm-arm/arch-davinci/serial.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * DaVinci serial device definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#include - -#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000) -#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) -#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) - -#endif /* __ASM_ARCH_SERIAL_H */ diff --git a/include/asm-arm/arch-davinci/system.h b/include/asm-arm/arch-davinci/system.h deleted file mode 100644 index 6713e4a44ee8..000000000000 --- a/include/asm-arm/arch-davinci/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * DaVinci system defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -extern void davinci_watchdog_reset(void); - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -static void arch_reset(char mode) -{ - davinci_watchdog_reset(); -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-davinci/timex.h b/include/asm-arm/arch-davinci/timex.h deleted file mode 100644 index 52827567841d..000000000000 --- a/include/asm-arm/arch-davinci/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * DaVinci timer defines - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* The source frequency for the timers is the 27MHz clock */ -#define CLOCK_TICK_RATE 27000000 - -#endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/include/asm-arm/arch-davinci/uncompress.h b/include/asm-arm/arch-davinci/uncompress.h deleted file mode 100644 index f6d1570f7206..000000000000 --- a/include/asm-arm/arch-davinci/uncompress.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Serial port stubs for kernel decompress status messages - * - * Author: Anant Gole - * (C) Copyright (C) 2006, Texas Instruments, Inc - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -/* PORT_16C550A, in polled non-fifo mode */ - -static void putc(char c) -{ - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; - - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); - uart[UART_TX] = c; -} - -static inline void flush(void) -{ - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; - while (!(uart[UART_LSR] & UART_LSR_THRE)) - barrier(); -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-davinci/vmalloc.h b/include/asm-arm/arch-davinci/vmalloc.h deleted file mode 100644 index 9b47fa89b333..000000000000 --- a/include/asm-arm/arch-davinci/vmalloc.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * DaVinci vmalloc definitions - * - * Author: Kevin Hilman, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include -#include - -/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */ -#define VMALLOC_END (IO_VIRT - (2<<20)) diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S deleted file mode 100644 index 9213bfe4831d..000000000000 --- a/include/asm-arm/arch-ebsa110/debug-macro.S +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-ebsa110/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -**/ - - .macro addruart,rx - mov \rx, #0xf0000000 - orr \rx, \rx, #0x00000be0 - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/include/asm-arm/arch-ebsa110/dma.h b/include/asm-arm/arch-ebsa110/dma.h deleted file mode 100644 index c52f9e2ab0bb..000000000000 --- a/include/asm-arm/arch-ebsa110/dma.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 DMA definitions - */ diff --git a/include/asm-arm/arch-ebsa110/entry-macro.S b/include/asm-arm/arch-ebsa110/entry-macro.S deleted file mode 100644 index f242be5c49ba..000000000000 --- a/include/asm-arm/arch-ebsa110/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ebsa110/entry-macro.S - * - * Low-level IRQ helper macros for ebsa110 platform. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - - -#define IRQ_STAT 0xff000000 /* read */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #IRQ_STAT - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, stat, base, tmp - ldrb \stat, [\base] @ get interrupts - mov \irqnr, #0 - tst \stat, #15 - addeq \irqnr, \irqnr, #4 - moveq \stat, \stat, lsr #4 - tst \stat, #3 - addeq \irqnr, \irqnr, #2 - moveq \stat, \stat, lsr #2 - tst \stat, #1 - addeq \irqnr, \irqnr, #1 - moveq \stat, \stat, lsr #1 - tst \stat, #1 @ bit 0 should be set - .endm - diff --git a/include/asm-arm/arch-ebsa110/hardware.h b/include/asm-arm/arch-ebsa110/hardware.h deleted file mode 100644 index 3ce864def41e..000000000000 --- a/include/asm-arm/arch-ebsa110/hardware.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/hardware.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the EBSA-110. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * The EBSA110 has a weird "ISA IO" region: - * - * Region 0 (addr = 0xf0000000 + io << 2) - * -------------------------------------------------------- - * Physical region IO region - * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0 - * f0000e60 - f0000e64 398 - 399 - * f0000de0 - f0000dfc 378 - 37f lp0 - * f0000be0 - f0000bfc 2f8 - 2ff ttyS1 - * - * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1)) - * -------------------------------------------------------- - * Physical region IO region - * f00014f1 a79 pnp write data - * f00007c0 - f00007c1 3e0 - 3e1 pcmcia - * f00004f1 279 pnp address - * f0000440 - f000046c 220 - 236 eth0 - * f0000405 203 pnp read data - */ - -#define ISAMEM_PHYS 0xe0000000 -#define ISAMEM_SIZE 0x10000000 - -#define ISAIO_PHYS 0xf0000000 -#define ISAIO_SIZE PGDIR_SIZE - -#define TRICK0_PHYS 0xf2000000 -#define TRICK1_PHYS 0xf2400000 -#define TRICK2_PHYS 0xf2800000 -#define TRICK3_PHYS 0xf2c00000 -#define TRICK4_PHYS 0xf3000000 -#define TRICK5_PHYS 0xf3400000 -#define TRICK6_PHYS 0xf3800000 -#define TRICK7_PHYS 0xf3c00000 - -#define ISAMEM_BASE 0xe0000000 -#define ISAIO_BASE 0xf0000000 - -#define PIT_BASE 0xfc000000 -#define SOFT_BASE 0xfd000000 - -/* - * RAM definitions - */ -#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */ - -#endif - diff --git a/include/asm-arm/arch-ebsa110/io.h b/include/asm-arm/arch-ebsa110/io.h deleted file mode 100644 index 44a4001de807..000000000000 --- a/include/asm-arm/arch-ebsa110/io.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/io.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffff - -u8 __inb8(unsigned int port); -void __outb8(u8 val, unsigned int port); - -u8 __inb16(unsigned int port); -void __outb16(u8 val, unsigned int port); - -u16 __inw(unsigned int port); -void __outw(u16 val, unsigned int port); - -u32 __inl(unsigned int port); -void __outl(u32 val, unsigned int port); - -u8 __readb(const volatile void __iomem *addr); -u16 __readw(const volatile void __iomem *addr); -u32 __readl(const volatile void __iomem *addr); - -void __writeb(u8 val, void __iomem *addr); -void __writew(u16 val, void __iomem *addr); -void __writel(u32 val, void __iomem *addr); - -/* - * Argh, someone forgot the IOCS16 line. We therefore have to handle - * the byte stearing by selecting the correct byte IO functions here. - */ -#ifdef ISA_SIXTEEN_BIT_PERIPHERAL -#define inb(p) __inb16(p) -#define outb(v,p) __outb16(v,p) -#else -#define inb(p) __inb8(p) -#define outb(v,p) __outb8(v,p) -#endif - -#define inw(p) __inw(p) -#define outw(v,p) __outw(v,p) - -#define inl(p) __inl(p) -#define outl(v,p) __outl(v,p) - -#define readb(b) __readb(b) -#define readw(b) __readw(b) -#define readl(b) __readl(b) -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -#define writeb(v,b) __writeb(v,b) -#define writew(v,b) __writew(v,b) -#define writel(v,b) __writel(v,b) - -static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size, - unsigned int flags) -{ - return (void __iomem *)cookie; -} - -#define __arch_ioremap __arch_ioremap -#define __arch_iounmap(cookie) do { } while (0) - -extern void insb(unsigned int port, void *buf, int sz); -extern void insw(unsigned int port, void *buf, int sz); -extern void insl(unsigned int port, void *buf, int sz); - -extern void outsb(unsigned int port, const void *buf, int sz); -extern void outsw(unsigned int port, const void *buf, int sz); -extern void outsl(unsigned int port, const void *buf, int sz); - -/* can't support writesb atm */ -extern void writesw(void __iomem *addr, const void *data, int wordlen); -extern void writesl(void __iomem *addr, const void *data, int longlen); - -/* can't support readsb atm */ -extern void readsw(const void __iomem *addr, void *data, int wordlen); -extern void readsl(const void __iomem *addr, void *data, int longlen); - -#endif diff --git a/include/asm-arm/arch-ebsa110/irqs.h b/include/asm-arm/arch-ebsa110/irqs.h deleted file mode 100644 index ded9bd9d7b8b..000000000000 --- a/include/asm-arm/arch-ebsa110/irqs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/irqs.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define NR_IRQS 8 - -#define IRQ_EBSA110_PRINTER 0 -#define IRQ_EBSA110_COM1 1 -#define IRQ_EBSA110_COM2 2 -#define IRQ_EBSA110_ETHERNET 3 -#define IRQ_EBSA110_TIMER0 4 -#define IRQ_EBSA110_TIMER1 5 -#define IRQ_EBSA110_PCMCIA 6 -#define IRQ_EBSA110_IMMEDIATE 7 diff --git a/include/asm-arm/arch-ebsa110/memory.h b/include/asm-arm/arch-ebsa110/memory.h deleted file mode 100644 index c7c500e176d0..000000000000 --- a/include/asm-arm/arch-ebsa110/memory.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Moved TASK_SIZE and PAGE_OFFSET here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * We keep this 1:1 so that we don't interfere - * with the PCMCIA memory regions - */ -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -/* - * Cache flushing area - SRAM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-ebsa110/system.h b/include/asm-arm/arch-ebsa110/system.h deleted file mode 100644 index d7c8fece0bc5..000000000000 --- a/include/asm-arm/arch-ebsa110/system.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/system.h - * - * Copyright (C) 1996-2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -/* - * EBSA110 idling methodology: - * - * We can not execute the "wait for interrupt" instruction since that - * will stop our MCLK signal (which provides the clock for the glue - * logic, and therefore the timer interrupt). - * - * Instead, we spin, polling the IRQ_STAT register for the occurrence - * of any interrupt with core clock down to the memory clock. - */ -static inline void arch_idle(void) -{ - const char *irq_stat = (char *)0xff000000; - - /* disable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc"); - - /* wait for an interrupt to occur */ - while (!*irq_stat); - - /* enable clock switching */ - asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc"); -} - -#define arch_reset(mode) cpu_reset(0x80000000) - -#endif diff --git a/include/asm-arm/arch-ebsa110/timex.h b/include/asm-arm/arch-ebsa110/timex.h deleted file mode 100644 index 1e9ef045092b..000000000000 --- a/include/asm-arm/arch-ebsa110/timex.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA110 architecture timex specifications - */ - -/* - * On the EBSA, the clock ticks at weird rates. - * This is therefore not used to calculate the - * divisor. - */ -#define CLOCK_TICK_RATE 47894000 - diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h deleted file mode 100644 index ae5b775eb0b7..000000000000 --- a/include/asm-arm/arch-ebsa110/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/uncompress.h - * - * Copyright (C) 1996,1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -#define SERIAL_BASE ((unsigned char *)0xf0000be0) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while (!(v & UART_LSR_THRE)); - - base[UART_TX << 2] = c; -} - -static inline void flush(void) -{ - unsigned char v, *base = SERIAL_BASE; - - do { - v = base[UART_LSR << 2]; - barrier(); - } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != - (UART_LSR_TEMT|UART_LSR_THRE)); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ebsa110/vmalloc.h b/include/asm-arm/arch-ebsa110/vmalloc.h deleted file mode 100644 index 26674ba4683c..000000000000 --- a/include/asm-arm/arch-ebsa110/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa110/vmalloc.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1f000000) diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S deleted file mode 100644 index b48cec4a0c45..000000000000 --- a/include/asm-arm/arch-ebsa285/debug-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* linux/include/asm-arm/arch-ebsa285/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include - -#ifndef CONFIG_DEBUG_DC21285_PORT - /* For NetWinder debugging */ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x7c000000 @ physical - movne \rx, #0xff000000 @ virtual - orr \rx, \rx, #0x000003f8 - .endm - -#define UART_SHIFT 0 -#define FLOW_CONTROL -#include - -#else - /* For EBSA285 debugging */ - .equ dc21285_high, ARMCSR_BASE & 0xff000000 - .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x42000000 - movne \rx, #dc21285_high - .if dc21285_low - orrne \rx, \rx, #dc21285_low - .endif - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x160] @ UARTDR - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x178] @ UARTFLG - tst \rd, #1 << 3 - bne 1001b - .endm - - .macro waituart,rd,rx - .endm -#endif diff --git a/include/asm-arm/arch-ebsa285/dma.h b/include/asm-arm/arch-ebsa285/dma.h deleted file mode 100644 index 0259ad45d33c..000000000000 --- a/include/asm-arm/arch-ebsa285/dma.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/dma.h - * - * Architecture DMA routines - * - * Copyright (C) 1998,1999 Russell King - * Copyright (C) 1998,1999 Philip Blundell - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * The 21285 has two internal DMA channels; we call these 8 and 9. - * On CATS hardware we have an additional eight ISA dma channels - * numbered 0..7. - */ -#define _ISA_DMA(x) (0+(x)) -#define _DC21285_DMA(x) (8+(x)) - -#define MAX_DMA_CHANNELS 10 - -#define DMA_FLOPPY _ISA_DMA(2) -#define DMA_ISA_CASCADE _ISA_DMA(4) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ebsa285/entry-macro.S b/include/asm-arm/arch-ebsa285/entry-macro.S deleted file mode 100644 index e203c628d500..000000000000 --- a/include/asm-arm/arch-ebsa285/entry-macro.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * include/asm-arm/arch-ebsa285/entry-macro.S - * - * Low-level IRQ helper macros for footbridge-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include - - .equ dc21285_high, ARMCSR_BASE & 0xff000000 - .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #dc21285_high - .if dc21285_low - orr \base, \base, #dc21285_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0x180] @ get interrupts - - mov \irqnr, #IRQ_SDRAMPARITY - tst \irqstat, #IRQ_MASK_SDRAMPARITY - bne 1001f - - tst \irqstat, #IRQ_MASK_UART_RX - movne \irqnr, #IRQ_CONRX - bne 1001f - - tst \irqstat, #IRQ_MASK_DMA1 - movne \irqnr, #IRQ_DMA1 - bne 1001f - - tst \irqstat, #IRQ_MASK_DMA2 - movne \irqnr, #IRQ_DMA2 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN0 - movne \irqnr, #IRQ_IN0 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN1 - movne \irqnr, #IRQ_IN1 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN2 - movne \irqnr, #IRQ_IN2 - bne 1001f - - tst \irqstat, #IRQ_MASK_IN3 - movne \irqnr, #IRQ_IN3 - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI - movne \irqnr, #IRQ_PCI - bne 1001f - - tst \irqstat, #IRQ_MASK_DOORBELLHOST - movne \irqnr, #IRQ_DOORBELLHOST - bne 1001f - - tst \irqstat, #IRQ_MASK_I2OINPOST - movne \irqnr, #IRQ_I2OINPOST - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER1 - movne \irqnr, #IRQ_TIMER1 - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER2 - movne \irqnr, #IRQ_TIMER2 - bne 1001f - - tst \irqstat, #IRQ_MASK_TIMER3 - movne \irqnr, #IRQ_TIMER3 - bne 1001f - - tst \irqstat, #IRQ_MASK_UART_TX - movne \irqnr, #IRQ_CONTX - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_ABORT - movne \irqnr, #IRQ_PCI_ABORT - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_SERR - movne \irqnr, #IRQ_PCI_SERR - bne 1001f - - tst \irqstat, #IRQ_MASK_DISCARD_TIMER - movne \irqnr, #IRQ_DISCARD_TIMER - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_DPERR - movne \irqnr, #IRQ_PCI_DPERR - bne 1001f - - tst \irqstat, #IRQ_MASK_PCI_PERR - movne \irqnr, #IRQ_PCI_PERR -1001: - .endm - diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h deleted file mode 100644 index 74610c2c63d4..000000000000 --- a/include/asm-arm/arch-ebsa285/hardware.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/hardware.h - * - * Copyright (C) 1998-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the EBSA-285. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* Virtual Physical Size - * 0xff800000 0x40000000 1MB X-Bus - * 0xff000000 0x7c000000 1MB PCI I/O space - * 0xfe000000 0x42000000 1MB CSR - * 0xfd000000 0x78000000 1MB Outbound write flush (not supported) - * 0xfc000000 0x79000000 1MB PCI IACK/special space - * 0xfb000000 0x7a000000 16MB PCI Config type 1 - * 0xfa000000 0x7b000000 16MB PCI Config type 0 - * 0xf9000000 0x50000000 1MB Cache flush - * 0xf0000000 0x80000000 16MB ISA memory - */ -#define XBUS_SIZE 0x00100000 -#define XBUS_BASE 0xff800000 - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE 0xff000000 - -#define ARMCSR_SIZE 0x00100000 -#define ARMCSR_BASE 0xfe000000 - -#define WFLUSH_SIZE 0x00100000 -#define WFLUSH_BASE 0xfd000000 - -#define PCIIACK_SIZE 0x00100000 -#define PCIIACK_BASE 0xfc000000 - -#define PCICFG1_SIZE 0x01000000 -#define PCICFG1_BASE 0xfb000000 - -#define PCICFG0_SIZE 0x01000000 -#define PCICFG0_BASE 0xfa000000 - -#define PCIMEM_SIZE 0x01000000 -#define PCIMEM_BASE 0xf0000000 - -#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_LED_AMBER (1 << 0) -#define XBUS_LED_GREEN (1 << 1) -#define XBUS_LED_RED (1 << 2) -#define XBUS_LED_TOGGLE (1 << 8) - -#define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) -#define XBUS_SWITCH_J17_13 ((*XBUS_SWITCH) & (1 << 4)) -#define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5)) -#define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6)) - -#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) - - -/* PIC irq control */ -#define PIC_LO 0x20 -#define PIC_MASK_LO 0x21 -#define PIC_HI 0xA0 -#define PIC_MASK_HI 0xA1 - -/* GPIO pins */ -#define GPIO_CCLK 0x800 -#define GPIO_DSCLK 0x400 -#define GPIO_E2CLK 0x200 -#define GPIO_IOLOAD 0x100 -#define GPIO_RED_LED 0x080 -#define GPIO_WDTIMER 0x040 -#define GPIO_DATA 0x020 -#define GPIO_IOCLK 0x010 -#define GPIO_DONE 0x008 -#define GPIO_FAN 0x004 -#define GPIO_GREEN_LED 0x002 -#define GPIO_RESET 0x001 - -/* CPLD pins */ -#define CPLD_DS_ENABLE 8 -#define CPLD_7111_DISABLE 4 -#define CPLD_UNMUTE 2 -#define CPLD_FLASH_WR_ENABLE 1 - -#ifndef __ASSEMBLY__ -extern void gpio_modify_op(int mask, int set); -extern void gpio_modify_io(int mask, int in); -extern int gpio_read(void); -extern void cpld_modify(int mask, int set); -#endif - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x81000000 - -#endif diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h deleted file mode 100644 index e88c6e230387..000000000000 --- a/include/asm-arm/arch-ebsa285/io.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffff - -/* - * Translation of various region addresses to virtual addresses - */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#if 1 -#define __mem_pci(a) (a) -#else - -static inline void __iomem *___mem_pci(void __iomem *p) -{ - unsigned long a = (unsigned long)p; - BUG_ON(a <= 0xc0000000 || a >= 0xe0000000); - return p; -} - -#define __mem_pci(a) ___mem_pci(a) -#endif - -#endif diff --git a/include/asm-arm/arch-ebsa285/irqs.h b/include/asm-arm/arch-ebsa285/irqs.h deleted file mode 100644 index 3e766f1cecf1..000000000000 --- a/include/asm-arm/arch-ebsa285/irqs.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/irqs.h - * - * Copyright (C) 1998 Russell King - * Copyright (C) 1998 Phil Blundell - * - * Changelog: - * 20-Jan-1998 RMK Started merge of EBSA286, CATS and NetWinder - * 01-Feb-1999 PJB ISA IRQs start at 0 not 16 - */ -#include - -#define NR_IRQS 36 -#define NR_DC21285_IRQS 16 - -#define _ISA_IRQ(x) (0 + (x)) -#define _ISA_INR(x) ((x) - 0) -#define _DC21285_IRQ(x) (16 + (x)) -#define _DC21285_INR(x) ((x) - 16) - -/* - * This is a list of all interrupts that the 21285 - * can generate and we handle. - */ -#define IRQ_CONRX _DC21285_IRQ(0) -#define IRQ_CONTX _DC21285_IRQ(1) -#define IRQ_TIMER1 _DC21285_IRQ(2) -#define IRQ_TIMER2 _DC21285_IRQ(3) -#define IRQ_TIMER3 _DC21285_IRQ(4) -#define IRQ_IN0 _DC21285_IRQ(5) -#define IRQ_IN1 _DC21285_IRQ(6) -#define IRQ_IN2 _DC21285_IRQ(7) -#define IRQ_IN3 _DC21285_IRQ(8) -#define IRQ_DOORBELLHOST _DC21285_IRQ(9) -#define IRQ_DMA1 _DC21285_IRQ(10) -#define IRQ_DMA2 _DC21285_IRQ(11) -#define IRQ_PCI _DC21285_IRQ(12) -#define IRQ_SDRAMPARITY _DC21285_IRQ(13) -#define IRQ_I2OINPOST _DC21285_IRQ(14) -#define IRQ_PCI_ABORT _DC21285_IRQ(15) -#define IRQ_PCI_SERR _DC21285_IRQ(16) -#define IRQ_DISCARD_TIMER _DC21285_IRQ(17) -#define IRQ_PCI_DPERR _DC21285_IRQ(18) -#define IRQ_PCI_PERR _DC21285_IRQ(19) - -#define IRQ_ISA_TIMER _ISA_IRQ(0) -#define IRQ_ISA_KEYBOARD _ISA_IRQ(1) -#define IRQ_ISA_CASCADE _ISA_IRQ(2) -#define IRQ_ISA_UART2 _ISA_IRQ(3) -#define IRQ_ISA_UART _ISA_IRQ(4) -#define IRQ_ISA_FLOPPY _ISA_IRQ(6) -#define IRQ_ISA_PRINTER _ISA_IRQ(7) -#define IRQ_ISA_RTC_ALARM _ISA_IRQ(8) -#define IRQ_ISA_2 _ISA_IRQ(9) -#define IRQ_ISA_PS2MOUSE _ISA_IRQ(12) -#define IRQ_ISA_HARDDISK1 _ISA_IRQ(14) -#define IRQ_ISA_HARDDISK2 _ISA_IRQ(15) - -#define IRQ_MASK_UART_RX (1 << 2) -#define IRQ_MASK_UART_TX (1 << 3) -#define IRQ_MASK_TIMER1 (1 << 4) -#define IRQ_MASK_TIMER2 (1 << 5) -#define IRQ_MASK_TIMER3 (1 << 6) -#define IRQ_MASK_IN0 (1 << 8) -#define IRQ_MASK_IN1 (1 << 9) -#define IRQ_MASK_IN2 (1 << 10) -#define IRQ_MASK_IN3 (1 << 11) -#define IRQ_MASK_DOORBELLHOST (1 << 15) -#define IRQ_MASK_DMA1 (1 << 16) -#define IRQ_MASK_DMA2 (1 << 17) -#define IRQ_MASK_PCI (1 << 18) -#define IRQ_MASK_SDRAMPARITY (1 << 24) -#define IRQ_MASK_I2OINPOST (1 << 25) -#define IRQ_MASK_PCI_ABORT ((1 << 29) | (1 << 30)) -#define IRQ_MASK_PCI_SERR (1 << 23) -#define IRQ_MASK_DISCARD_TIMER (1 << 27) -#define IRQ_MASK_PCI_DPERR (1 << 28) -#define IRQ_MASK_PCI_PERR (1 << 31) - -/* - * Netwinder interrupt allocations - */ -#define IRQ_NETWINDER_ETHER10 IRQ_IN0 -#define IRQ_NETWINDER_ETHER100 IRQ_IN1 -#define IRQ_NETWINDER_VIDCOMP IRQ_IN2 -#define IRQ_NETWINDER_PS2MOUSE _ISA_IRQ(5) -#define IRQ_NETWINDER_IR _ISA_IRQ(6) -#define IRQ_NETWINDER_BUTTON _ISA_IRQ(10) -#define IRQ_NETWINDER_VGA _ISA_IRQ(11) -#define IRQ_NETWINDER_SOUND _ISA_IRQ(12) - -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM -#define I8042_KBD_IRQ IRQ_ISA_KEYBOARD -#define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) -#define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY - -#define irq_canonicalize(_i) (((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i) diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h deleted file mode 100644 index 9019a3bf5ab9..000000000000 --- a/include/asm-arm/arch-ebsa285/memory.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/memory.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings. - * 17-May-1998 DAG Added __virt_to_bus and __bus_to_virt functions. - * 21-Nov-1998 RMK Changed __virt_to_bus and __bus_to_virt to macros. - * 21-Mar-1999 RMK Added PAGE_OFFSET for co285 architecture. - * Renamed to memory.h - * Moved PAGE_OFFSET and TASK_SIZE here - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - - -#if defined(CONFIG_FOOTBRIDGE_ADDIN) -/* - * If we may be using add-in footbridge mode, then we must - * use the out-of-line translation that makes use of the - * PCI BAR - */ -#ifndef __ASSEMBLY__ -extern unsigned long __virt_to_bus(unsigned long); -extern unsigned long __bus_to_virt(unsigned long); -#endif - -#elif defined(CONFIG_FOOTBRIDGE_HOST) - -#define __virt_to_bus(x) ((x) - 0xe0000000) -#define __bus_to_virt(x) ((x) + 0xe0000000) - -#else - -#error "Undefined footbridge mode" - -#endif - -/* Task size and page offset at 3GB */ -#define TASK_SIZE UL(0xbf000000) -#define PAGE_OFFSET UL(0xc0000000) - -/* - * Cache flushing area. - */ -#define FLUSH_BASE 0xf9000000 - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3) - -#define FLUSH_BASE_PHYS 0x50000000 - -#endif diff --git a/include/asm-arm/arch-ebsa285/system.h b/include/asm-arm/arch-ebsa285/system.h deleted file mode 100644 index a720bf7ca123..000000000000 --- a/include/asm-arm/arch-ebsa285/system.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - /* - * Jump into the ROM - */ - cpu_reset(0x41000000); - } else { - if (machine_is_netwinder()) { - /* open up the SuperIO chip - */ - outb(0x87, 0x370); - outb(0x87, 0x370); - - /* aux function group 1 (logical device 7) - */ - outb(0x07, 0x370); - outb(0x07, 0x371); - - /* set GP16 for WD-TIMER output - */ - outb(0xe6, 0x370); - outb(0x00, 0x371); - - /* set a RED LED and toggle WD_TIMER for rebooting - */ - outb(0xc4, 0x338); - } else { - /* - * Force the watchdog to do a CPU reset. - * - * After making sure that the watchdog is disabled - * (so we can change the timer registers) we first - * enable the timer to autoreload itself. Next, the - * timer interval is set really short and any - * current interrupt request is cleared (so we can - * see an edge transition). Finally, TIMER4 is - * enabled as the watchdog. - */ - *CSR_SA110_CNTL &= ~(1 << 13); - *CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | - TIMER_CNTL_AUTORELOAD | - TIMER_CNTL_DIV16; - *CSR_TIMER4_LOAD = 0x2; - *CSR_TIMER4_CLR = 0; - *CSR_SA110_CNTL |= (1 << 13); - } - } -} diff --git a/include/asm-arm/arch-ebsa285/timex.h b/include/asm-arm/arch-ebsa285/timex.h deleted file mode 100644 index df60b3812d96..000000000000 --- a/include/asm-arm/arch-ebsa285/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/timex.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA285 architecture timex specifications - */ - -/* - * We assume a constant here; this satisfies the maths in linux/timex.h - * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but - * this must be a constant. - */ -#define CLOCK_TICK_RATE (50000000/16) diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h deleted file mode 100644 index 86142c882b3a..000000000000 --- a/include/asm-arm/arch-ebsa285/uncompress.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/uncompress.h - * - * Copyright (C) 1996-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - -/* - * Note! This could cause problems on the NetWinder - */ -#define DC21285_BASE ((volatile unsigned int *)0x42000160) -#define SER0_BASE ((volatile unsigned char *)0x7c0003f8) - -static inline void putc(char c) -{ - if (machine_is_netwinder()) { - while ((SER0_BASE[5] & 0x60) != 0x60) - barrier(); - SER0_BASE[0] = c; - } else { - while (DC21285_BASE[6] & 8); - DC21285_BASE[0] = c; - } -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h deleted file mode 100644 index e487d7e8c8a6..000000000000 --- a/include/asm-arm/arch-ebsa285/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-ebsa285/vmalloc.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#define VMALLOC_END (PAGE_OFFSET + 0x30000000) diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S deleted file mode 100644 index 397565a0c671..000000000000 --- a/include/asm-arm/arch-ep93xx/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/debug-macro.S - * Debugging macro include header - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base - ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rx, \rx, #0x000c0000 - .endm - -#include diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h deleted file mode 100644 index 898b3ab7fd46..000000000000 --- a/include/asm-arm/arch-ep93xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/dma.h - */ diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S deleted file mode 100644 index 241ec221a047..000000000000 --- a/include/asm-arm/arch-ep93xx/entry-macro.S +++ /dev/null @@ -1,59 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/entry-macro.S - * IRQ demultiplexing for EP93xx - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(EP93XX_AHB_VIRT_BASE) - orr \base, \base, #0x000b0000 - mov \irqnr, #0 - ldr \irqstat, [\base] @ lower 32 interrupts - cmp \irqstat, #0 - bne 1001f - - eor \base, \base, #0x00070000 - ldr \irqstat, [\base] @ upper 32 interrupts - cmp \irqstat, #0 - beq 1002f - mov \irqnr, #0x20 - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 - -1002: - .endm diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h deleted file mode 100644 index 625c6f0abc03..000000000000 --- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h - */ - -#ifndef __ASM_ARCH_EP93XX_REGS_H -#define __ASM_ARCH_EP93XX_REGS_H - -/* - * EP93xx linux memory map: - * - * virt phys size - * fe800000 5M per-platform mappings - * fed00000 80800000 2M APB - * fef00000 80000000 1M AHB - */ - -#define EP93XX_AHB_PHYS_BASE 0x80000000 -#define EP93XX_AHB_VIRT_BASE 0xfef00000 -#define EP93XX_AHB_SIZE 0x00100000 - -#define EP93XX_APB_PHYS_BASE 0x80800000 -#define EP93XX_APB_VIRT_BASE 0xfed00000 -#define EP93XX_APB_SIZE 0x00200000 - - -/* AHB peripherals */ -#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) - -#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) -#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) - -#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) -#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) - -#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000) - -#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000) - -#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000) - -#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000) - -#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000) - -#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000) - -#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000) - -#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000) - - -/* APB peripherals */ -#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000) -#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) -#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) -#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) -#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) -#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) -#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) -#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) -#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) -#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) -#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) -#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) -#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) -#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) -#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) -#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) - -#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) - -#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) - -#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) -#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) -#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) -#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) -#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) -#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) -#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) -#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) -#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) -#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) -#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) -#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) -#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) -#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) -#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) -#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) -#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) - -#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) - -#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000) - -#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000) - -#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000) -#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) - -#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000) -#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) - -#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000) -#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) - -#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000) - -#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) -#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) - -#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) - -#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) - -#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) -#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) -#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) -#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) -#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 -#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 -#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) -#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) -#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) -#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) -#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 -#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) - -#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h deleted file mode 100644 index 4d0b3023bff7..000000000000 --- a/include/asm-arm/arch-ep93xx/gesbc9312.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/gesbc9312.h - */ diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h deleted file mode 100644 index 186e7c715f8a..000000000000 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/gpio.h - */ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -/* GPIO port A. */ -#define EP93XX_GPIO_LINE_A(x) ((x) + 0) -#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) -#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1) -#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2) -#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3) -#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4) -#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5) -#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6) -#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7) - -/* GPIO port B. */ -#define EP93XX_GPIO_LINE_B(x) ((x) + 8) -#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0) -#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1) -#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2) -#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3) -#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4) -#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5) -#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6) -#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) - -/* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 40) -#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) -#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) -#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) -#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3) -#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4) -#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5) -#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6) -#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7) - -/* GPIO port D. */ -#define EP93XX_GPIO_LINE_D(x) ((x) + 24) -#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0) -#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1) -#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2) -#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3) -#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4) -#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5) -#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6) -#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7) - -/* GPIO port E. */ -#define EP93XX_GPIO_LINE_E(x) ((x) + 32) -#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0) -#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1) -#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2) -#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3) -#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4) -#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5) -#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6) -#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) - -/* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 16) -#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) -#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) -#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) -#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3) -#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4) -#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5) -#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6) -#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7) - -/* GPIO port G. */ -#define EP93XX_GPIO_LINE_G(x) ((x) + 48) -#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0) -#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1) -#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2) -#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3) -#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4) -#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5) -#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6) -#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7) - -/* GPIO port H. */ -#define EP93XX_GPIO_LINE_H(x) ((x) + 56) -#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0) -#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1) -#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2) -#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3) -#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4) -#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5) -#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) -#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) - -/* maximum value for gpio line identifiers */ -#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) - -/* maximum value for irq capable line identifiers */ -#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) - -/* new generic GPIO API - see Documentation/gpio.txt */ - -#include - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -/* - * Map GPIO A0..A7 (0..7) to irq 64..71, - * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (16..24) to irq 80..87. - */ -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) - return 64 + gpio; - - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq - gpio_to_irq(0); -} - -#endif diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h deleted file mode 100644 index 4233f6e85150..000000000000 --- a/include/asm-arm/arch-ep93xx/hardware.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/hardware.h - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "ep93xx-regs.h" - -#define pcibios_assign_all_busses() 0 - -#include "platform.h" - -#include "gesbc9312.h" -#include "ts72xx.h" - -#endif diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h deleted file mode 100644 index 7b4d25e29060..000000000000 --- a/include/asm-arm/arch-ep93xx/io.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/io.h - */ - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem *)(p)) -#define __mem_pci(p) (p) diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h deleted file mode 100644 index 53d4a68bfc88..000000000000 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/irqs.h - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define IRQ_EP93XX_COMMRX 2 -#define IRQ_EP93XX_COMMTX 3 -#define IRQ_EP93XX_TIMER1 4 -#define IRQ_EP93XX_TIMER2 5 -#define IRQ_EP93XX_AACINTR 6 -#define IRQ_EP93XX_DMAM2P0 7 -#define IRQ_EP93XX_DMAM2P1 8 -#define IRQ_EP93XX_DMAM2P2 9 -#define IRQ_EP93XX_DMAM2P3 10 -#define IRQ_EP93XX_DMAM2P4 11 -#define IRQ_EP93XX_DMAM2P5 12 -#define IRQ_EP93XX_DMAM2P6 13 -#define IRQ_EP93XX_DMAM2P7 14 -#define IRQ_EP93XX_DMAM2P8 15 -#define IRQ_EP93XX_DMAM2P9 16 -#define IRQ_EP93XX_DMAM2M0 17 -#define IRQ_EP93XX_DMAM2M1 18 -#define IRQ_EP93XX_GPIO0MUX 19 -#define IRQ_EP93XX_GPIO1MUX 20 -#define IRQ_EP93XX_GPIO2MUX 21 -#define IRQ_EP93XX_GPIO3MUX 22 -#define IRQ_EP93XX_UART1RX 23 -#define IRQ_EP93XX_UART1TX 24 -#define IRQ_EP93XX_UART2RX 25 -#define IRQ_EP93XX_UART2TX 26 -#define IRQ_EP93XX_UART3RX 27 -#define IRQ_EP93XX_UART3TX 28 -#define IRQ_EP93XX_KEY 29 -#define IRQ_EP93XX_TOUCH 30 -#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc - -#define IRQ_EP93XX_EXT0 32 -#define IRQ_EP93XX_EXT1 33 -#define IRQ_EP93XX_EXT2 34 -#define IRQ_EP93XX_64HZ 35 -#define IRQ_EP93XX_WATCHDOG 36 -#define IRQ_EP93XX_RTC 37 -#define IRQ_EP93XX_IRDA 38 -#define IRQ_EP93XX_ETHERNET 39 -#define IRQ_EP93XX_EXT3 40 -#define IRQ_EP93XX_PROG 41 -#define IRQ_EP93XX_1HZ 42 -#define IRQ_EP93XX_VSYNC 43 -#define IRQ_EP93XX_VIDEO_FIFO 44 -#define IRQ_EP93XX_SSP1RX 45 -#define IRQ_EP93XX_SSP1TX 46 -#define IRQ_EP93XX_GPIO4MUX 47 -#define IRQ_EP93XX_GPIO5MUX 48 -#define IRQ_EP93XX_GPIO6MUX 49 -#define IRQ_EP93XX_GPIO7MUX 50 -#define IRQ_EP93XX_TIMER3 51 -#define IRQ_EP93XX_UART1 52 -#define IRQ_EP93XX_SSP 53 -#define IRQ_EP93XX_UART2 54 -#define IRQ_EP93XX_UART3 55 -#define IRQ_EP93XX_USB 56 -#define IRQ_EP93XX_ETHERNET_PME 57 -#define IRQ_EP93XX_DSP 58 -#define IRQ_EP93XX_GPIO_AB 59 -#define IRQ_EP93XX_SAI 60 -#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff - -#define NR_EP93XX_IRQS (64 + 24) - -#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -#define EP93XX_BOARD_IRQS 32 - -#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h deleted file mode 100644 index 4b1a5c7c8363..000000000000 --- a/include/asm-arm/arch-ep93xx/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __bus_to_virt(x) __phys_to_virt(x) -#define __virt_to_bus(x) __virt_to_phys(x) - - -#endif diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h deleted file mode 100644 index 44eccec2cba4..000000000000 --- a/include/asm-arm/arch-ep93xx/platform.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/platform.h - */ - -#ifndef __ASSEMBLY__ - -void ep93xx_map_io(void); -void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); -void ep93xx_init_devices(void); -extern struct sys_timer ep93xx_timer; - -struct ep93xx_eth_data -{ - unsigned char dev_addr[6]; - unsigned char phy_id; -}; - - -#endif diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h deleted file mode 100644 index f1a5acf51919..000000000000 --- a/include/asm-arm/arch-ep93xx/system.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/system.h - */ - -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - u32 devicecfg; - - local_irq_disable(); - - devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); - __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); - __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG); - - while (1) - ; -} diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h deleted file mode 100644 index 4140bddc97e2..000000000000 --- a/include/asm-arm/arch-ep93xx/timex.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/timex.h - */ - -#define CLOCK_TICK_RATE 983040 diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h deleted file mode 100644 index a94f63ff0535..000000000000 --- a/include/asm-arm/arch-ep93xx/ts72xx.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/ts72xx.h - */ - -/* - * TS72xx memory map: - * - * virt phys size - * febff000 22000000 4K model number register - * febfe000 22400000 4K options register - * febfd000 22800000 4K options register #2 - * febfc000 [67]0000000 4K NAND data register - * febfb000 [67]0400000 4K NAND control register - * febfa000 [67]0800000 4K NAND busy register - * febf9000 10800000 4K TS-5620 RTC index register - * febf8000 11700000 4K TS-5620 RTC data register - */ - -#define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE 0xfebff000 -#define TS72XX_MODEL_SIZE 0x00001000 - -#define TS72XX_MODEL_TS7200 0x00 -#define TS72XX_MODEL_TS7250 0x01 -#define TS72XX_MODEL_TS7260 0x02 - - -#define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000 -#define TS72XX_OPTIONS_SIZE 0x00001000 - -#define TS72XX_OPTIONS_COM2_RS485 0x02 -#define TS72XX_OPTIONS_MAX197 0x01 - - -#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000 -#define TS72XX_OPTIONS2_SIZE 0x00001000 - -#define TS72XX_OPTIONS2_TS9420 0x04 -#define TS72XX_OPTIONS2_TS9420_BOOT 0x02 - - -#define TS72XX_NOR_PHYS_BASE 0x60000000 -#define TS72XX_NOR2_PHYS_BASE 0x62000000 - -#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000 -#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000 -#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000 -#define TS72XX_NAND_DATA_SIZE 0x00001000 - -#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000 -#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000 -#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000 -#define TS72XX_NAND_CONTROL_SIZE 0x00001000 - -#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000 -#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000 -#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000 -#define TS72XX_NAND_BUSY_SIZE 0x00001000 - - -#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000 -#define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 -#define TS72XX_RTC_INDEX_SIZE 0x00001000 - -#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000 -#define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 -#define TS72XX_RTC_DATA_SIZE 0x00001000 - - -#ifndef __ASSEMBLY__ -#include - -static inline int board_is_ts7200(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; -} - -static inline int board_is_ts7250(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; -} - -static inline int board_is_ts7260(void) -{ - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; -} - -static inline int is_max197_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) & - TS72XX_OPTIONS_MAX197); -} - -static inline int is_ts9420_installed(void) -{ - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & - TS72XX_OPTIONS2_TS9420); -} -#endif diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h deleted file mode 100644 index c15274c85d5d..000000000000 --- a/include/asm-arm/arch-ep93xx/uncompress.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/uncompress.h - * - * Copyright (C) 2006 Lennert Buytenhek - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -#include - -static unsigned char __raw_readb(unsigned int ptr) -{ - return *((volatile unsigned char *)ptr); -} - -static unsigned int __raw_readl(unsigned int ptr) -{ - return *((volatile unsigned int *)ptr); -} - -static void __raw_writeb(unsigned char value, unsigned int ptr) -{ - *((volatile unsigned char *)ptr) = value; -} - -static void __raw_writel(unsigned int value, unsigned int ptr) -{ - *((volatile unsigned int *)ptr) = value; -} - - -#define PHYS_UART1_DATA 0x808c0000 -#define PHYS_UART1_FLAG 0x808c0018 -#define UART1_FLAG_TXFF 0x20 - -static inline void putc(int c) -{ - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF)) - break; - } - - __raw_writeb(c, PHYS_UART1_DATA); -} - -static inline void flush(void) -{ -} - - -/* - * Some bootloaders don't turn off DMA from the ethernet MAC before - * jumping to linux, which means that we might end up with bits of RX - * status and packet data scribbled over the uncompressed kernel image. - * Work around this by resetting the ethernet MAC before we uncompress. - */ -#define PHYS_ETH_SELF_CTL 0x80010020 -#define ETH_SELF_CTL_RESET 0x00000001 - -static void ethernet_reset(void) -{ - unsigned int v; - - /* Reset the ethernet MAC. */ - v = __raw_readl(PHYS_ETH_SELF_CTL); - __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL); - - /* Wait for reset to finish. */ - while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET) - ; -} - - -static void arch_decomp_setup(void) -{ - ethernet_reset(); -} - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h deleted file mode 100644 index 205ea6b1cf5e..000000000000 --- a/include/asm-arm/arch-ep93xx/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ep93xx/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-h720x/boards.h b/include/asm-arm/arch-h720x/boards.h deleted file mode 100644 index 8021f81f0742..000000000000 --- a/include/asm-arm/arch-h720x/boards.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/boards.h - * - * Copyright (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * - * This file contains the board specific defines for various devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_INCMACH_H -#error Do not include this file directly. Include asm/hardware.h instead ! -#endif - -/* Hynix H7202 developer board specific device defines */ -#ifdef CONFIG_ARCH_H7202 - -/* FLASH */ -#define FLASH_VIRT 0xd0000000 -#define FLASH_PHYS 0x00000000 -#define FLASH_SIZE 0x02000000 - -/* onboard LAN controller */ -# define ETH0_PHYS 0x08000000 - -/* Touch screen defines */ -/* GPIO Port */ -#define PEN_GPIO GPIO_B_VIRT -/* Bitmask for pen down interrupt */ -#define PEN_INT_BIT (1<<7) -/* Bitmask for pen up interrupt */ -#define PEN_ENA_BIT (1<<6) -/* pen up interrupt */ -#define IRQ_PEN IRQ_MUX_GPIOB(7) - -#endif - -/* Hynix H7201 developer board specific device defines */ -#if defined (CONFIG_ARCH_H7201) -/* ROM DISK SPACE */ -#define ROM_DISK_BASE 0xc1800000 -#define ROM_DISK_START 0x41800000 -#define ROM_DISK_SIZE 0x00700000 - -/* SRAM DISK SPACE */ -#define SRAM_DISK_BASE 0xf1000000 -#define SRAM_DISK_START 0x04000000 -#define SRAM_DISK_SIZE 0x00400000 -#endif - diff --git a/include/asm-arm/arch-h720x/debug-macro.S b/include/asm-arm/arch-h720x/debug-macro.S deleted file mode 100644 index 82822d362733..000000000000 --- a/include/asm-arm/arch-h720x/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-h720x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00020000 @ UART1 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/include/asm-arm/arch-h720x/dma.h b/include/asm-arm/arch-h720x/dma.h deleted file mode 100644 index bfc6636679f7..000000000000 --- a/include/asm-arm/arch-h720x/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/dma.h - * - * Architecture DMA routes - * - * Copyright (C) 1997.1998 Russell King - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#if defined (CONFIG_CPU_H7201) -#define MAX_DMA_CHANNELS 3 -#elif defined (CONFIG_CPU_H7202) -#define MAX_DMA_CHANNELS 4 -#else -#error processor definition missmatch -#endif - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-h720x/entry-macro.S b/include/asm-arm/arch-h720x/entry-macro.S deleted file mode 100644 index 38dd63ae104e..000000000000 --- a/include/asm-arm/arch-h720x/entry-macro.S +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-h720x/entry-macro.S - * - * Low-level IRQ helper macros for Hynix HMS720x based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202) - @ we could use the id register on H7202, but this is not - @ properly updated when we come back from asm_do_irq - @ without a previous return from interrupt - @ (see loops below in irq_svc, irq_usr) - @ We see unmasked pending ints only, as the masked pending ints - @ are not visible here - - mov \base, #0xf0000000 @ base register - orr \base, \base, #0x24000 @ irqbase - ldr \irqstat, [\base, #0x04] @ get interrupt status -#if defined (CONFIG_CPU_H7201) - ldr \tmp, =0x001fffff -#else - mvn \tmp, #0xc0000000 -#endif - and \irqstat, \irqstat, \tmp @ mask out unused ints - mov \irqnr, #0 - - mov \tmp, #0xff00 - orr \tmp, \tmp, #0xff - tst \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr #16 - tst \irqstat, #255 - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr #8 - tst \irqstat, #15 - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr #4 - tst \irqstat, #3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr #2 - tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tst \irqstat, #1 @ bit 0 should be set - .endm - - .macro irq_prio_table - .endm - -#else -#error hynix processor selection missmatch -#endif - diff --git a/include/asm-arm/arch-h720x/h7201-regs.h b/include/asm-arm/arch-h720x/h7201-regs.h deleted file mode 100644 index 49d4f6bd3080..000000000000 --- a/include/asm-arm/arch-h720x/h7201-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/h7201-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * (C) 2004 Sascha Hauer - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_VIRT (IO_VIRT + 0x50100) -#define SERIAL3_VIRT (IO_VIRT + 0x50200) - -/* - * PCMCIA - */ -#define PCMCIA0_ATT_BASE 0xe5000000 -#define PCMCIA0_ATT_SIZE 0x00200000 -#define PCMCIA0_ATT_START 0x20000000 -#define PCMCIA0_MEM_BASE 0xe5200000 -#define PCMCIA0_MEM_SIZE 0x00200000 -#define PCMCIA0_MEM_START 0x24000000 -#define PCMCIA0_IO_BASE 0xe5400000 -#define PCMCIA0_IO_SIZE 0x00200000 -#define PCMCIA0_IO_START 0x28000000 - -#define PCMCIA1_ATT_BASE 0xe5600000 -#define PCMCIA1_ATT_SIZE 0x00200000 -#define PCMCIA1_ATT_START 0x30000000 -#define PCMCIA1_MEM_BASE 0xe5800000 -#define PCMCIA1_MEM_SIZE 0x00200000 -#define PCMCIA1_MEM_START 0x34000000 -#define PCMCIA1_IO_BASE 0xe5a00000 -#define PCMCIA1_IO_SIZE 0x00200000 -#define PCMCIA1_IO_START 0x38000000 - -#define PRIME3C_BASE 0xf0050000 -#define PRIME3C_SIZE 0x00001000 -#define PRIME3C_START 0x10000000 - -/* VGA Controller */ -#define VGA_RAMBASE 0x50 -#define VGA_TIMING0 0x60 -#define VGA_TIMING1 0x64 -#define VGA_TIMING2 0x68 -#define VGA_TIMING3 0x6c - -#define LCD_CTRL_VGA_ENABLE 0x00000100 -#define LCD_CTRL_VGA_BPP_MASK 0x00000600 -#define LCD_CTRL_VGA_4BPP 0x00000000 -#define LCD_CTRL_VGA_8BPP 0x00000200 -#define LCD_CTRL_VGA_16BPP 0x00000300 -#define LCD_CTRL_SHARE_DMA 0x00000800 -#define LCD_CTRL_VDE 0x00100000 -#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */ -#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */ - -#define VGA_PALETTE_BASE (IO_VIRT + 0x10800) diff --git a/include/asm-arm/arch-h720x/h7202-regs.h b/include/asm-arm/arch-h720x/h7202-regs.h deleted file mode 100644 index 43d8ba8a6013..000000000000 --- a/include/asm-arm/arch-h720x/h7202-regs.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/h7202-regs.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * (C) 2004 Sascha Hauer - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#define SERIAL2_OFS 0x2d000 -#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS) -#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS) -#define SERIAL3_OFS 0x2e000 -#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS) -#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS) - -/* Matrix Keyboard Controller */ -#define KBD_VIRT (IO_VIRT + 0x22000) -#define KBD_KBCR 0x00 -#define KBD_KBSC 0x04 -#define KBD_KBTR 0x08 -#define KBD_KBVR0 0x0C -#define KBD_KBVR1 0x10 -#define KBD_KBSR 0x18 - -#define KBD_KBCR_SCANENABLE (1 << 7) -#define KBD_KBCR_NPOWERDOWN (1 << 2) -#define KBD_KBCR_CLKSEL_MASK (3) -#define KBD_KBCR_CLKSEL_PCLK2 0x0 -#define KBD_KBCR_CLKSEL_PCLK128 0x1 -#define KBD_KBCR_CLKSEL_PCLK256 0x2 -#define KBD_KBCR_CLKSEL_PCLK512 0x3 - -#define KBD_KBSR_INTR (1 << 0) -#define KBD_KBSR_WAKEUP (1 << 1) - -/* USB device controller */ - -#define USBD_BASE (IO_VIRT + 0x12000) -#define USBD_LENGTH 0x3C - -#define USBD_GCTRL 0x00 -#define USBD_EPCTRL 0x04 -#define USBD_INTMASK 0x08 -#define USBD_INTSTAT 0x0C -#define USBD_PWR 0x10 -#define USBD_DMARXTX 0x14 -#define USBD_DEVID 0x18 -#define USBD_DEVCLASS 0x1C -#define USBD_INTCLASS 0x20 -#define USBD_SETUP0 0x24 -#define USBD_SETUP1 0x28 -#define USBD_ENDP0RD 0x2C -#define USBD_ENDP0WT 0x30 -#define USBD_ENDP1RD 0x34 -#define USBD_ENDP2WT 0x38 - -/* PS/2 port */ -#define PSDATA 0x00 -#define PSSTAT 0x04 -#define PSSTAT_TXEMPTY (1<<0) -#define PSSTAT_TXBUSY (1<<1) -#define PSSTAT_RXFULL (1<<2) -#define PSSTAT_RXBUSY (1<<3) -#define PSSTAT_CLKIN (1<<4) -#define PSSTAT_DATAIN (1<<5) -#define PSSTAT_PARITY (1<<6) - -#define PSCONF 0x08 -#define PSCONF_ENABLE (1<<0) -#define PSCONF_TXINTEN (1<<2) -#define PSCONF_RXINTEN (1<<3) -#define PSCONF_FORCECLKLOW (1<<4) -#define PSCONF_FORCEDATLOW (1<<5) -#define PSCONF_LCE (1<<6) - -#define PSINTR 0x0C -#define PSINTR_TXINT (1<<0) -#define PSINTR_RXINT (1<<1) -#define PSINTR_PAR (1<<2) -#define PSINTR_RXTO (1<<3) -#define PSINTR_TXTO (1<<4) - -#define PSTDLO 0x10 /* clk low before start transmission */ -#define PSTPRI 0x14 /* PRI clock */ -#define PSTXMT 0x18 /* maximum transmission time */ -#define PSTREC 0x20 /* maximum receive time */ -#define PSPWDN 0x3c - -/* ADC converter */ -#define ADC_BASE (IO_VIRT + 0x29000) -#define ADC_CR 0x00 -#define ADC_TSCTRL 0x04 -#define ADC_BT_CTRL 0x08 -#define ADC_MC_CTRL 0x0C -#define ADC_STATUS 0x10 - -/* ADC control register bits */ -#define ADC_CR_PW_CTRL 0x80 -#define ADC_CR_DIRECTC 0x04 -#define ADC_CR_CONTIME_NO 0x00 -#define ADC_CR_CONTIME_2 0x04 -#define ADC_CR_CONTIME_4 0x08 -#define ADC_CR_CONTIME_ADE 0x0c -#define ADC_CR_LONGCALTIME 0x01 - -/* ADC touch panel register bits */ -#define ADC_TSCTRL_ENABLE 0x80 -#define ADC_TSCTRL_INTR 0x40 -#define ADC_TSCTRL_SWBYPSS 0x20 -#define ADC_TSCTRL_SWINVT 0x10 -#define ADC_TSCTRL_S400 0x03 -#define ADC_TSCTRL_S200 0x02 -#define ADC_TSCTRL_S100 0x01 -#define ADC_TSCTRL_S50 0x00 - -/* ADC Interrupt Status Register bits */ -#define ADC_STATUS_TS_BIT 0x80 -#define ADC_STATUS_MBT_BIT 0x40 -#define ADC_STATUS_BBT_BIT 0x20 -#define ADC_STATUS_MIC_BIT 0x10 - -/* Touch data registers */ -#define ADC_TS_X0X1 0x30 -#define ADC_TS_X2X3 0x34 -#define ADC_TS_Y0Y1 0x38 -#define ADC_TS_Y2Y3 0x3c -#define ADC_TS_X4X5 0x40 -#define ADC_TS_X6X7 0x44 -#define ADC_TS_Y4Y5 0x48 -#define ADC_TS_Y6Y7 0x50 - -/* battery data */ -#define ADC_MB_DATA 0x54 -#define ADC_BB_DATA 0x58 - -/* Sound data register */ -#define ADC_SD_DAT0 0x60 -#define ADC_SD_DAT1 0x64 -#define ADC_SD_DAT2 0x68 -#define ADC_SD_DAT3 0x6c -#define ADC_SD_DAT4 0x70 -#define ADC_SD_DAT5 0x74 -#define ADC_SD_DAT6 0x78 -#define ADC_SD_DAT7 0x7c diff --git a/include/asm-arm/arch-h720x/hardware.h b/include/asm-arm/arch-h720x/hardware.h deleted file mode 100644 index dfb778906a9f..000000000000 --- a/include/asm-arm/arch-h720x/hardware.h +++ /dev/null @@ -1,192 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/hardware.h - * - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * (C) 2003 Thomas Gleixner - * (C) 2003 Robert Schwebel - * - * This file contains the hardware definitions of the h720x processors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Do not add implementations specific defines here. This files contains - * only defines of the onchip peripherals. Add those defines to boards.h, - * which is included by this file. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define IOCLK (3686400L) - -/* Onchip peripherals */ - -#define IO_VIRT 0xf0000000 /* IO peripherals */ -#define IO_PHYS 0x80000000 -#define IO_SIZE 0x00050000 - -#ifdef CONFIG_CPU_H7202 -#include "h7202-regs.h" -#elif defined CONFIG_CPU_H7201 -#include "h7201-regs.h" -#else -#error machine definition mismatch -#endif - -/* Macro to access the CPU IO */ -#define CPU_IO(x) (*(volatile u32*)(x)) - -/* Macro to access general purpose regs (base, offset) */ -#define CPU_REG(x,y) CPU_IO(x+y) - -/* Macro to access irq related regs */ -#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x) - -/* CPU registers */ -/* general purpose I/O */ -#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5)) -#define GPIO_A_VIRT (GPIO_VIRT(0)) -#define GPIO_B_VIRT (GPIO_VIRT(1)) -#define GPIO_C_VIRT (GPIO_VIRT(2)) -#define GPIO_D_VIRT (GPIO_VIRT(3)) -#define GPIO_E_VIRT (GPIO_VIRT(4)) -#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4) - -#define AMULSEL_USIN2 (1<<5) -#define AMULSEL_USOUT2 (1<<6) -#define AMULSEL_USIN3 (1<<13) -#define AMULSEL_USOUT3 (1<<14) -#define AMULSEL_IRDIN (1<<15) -#define AMULSEL_IRDOUT (1<<7) - -/* Register offsets general purpose I/O */ -#define GPIO_DATA 0x00 -#define GPIO_DIR 0x04 -#define GPIO_MASK 0x08 -#define GPIO_STAT 0x0C -#define GPIO_EDGE 0x10 -#define GPIO_CLR 0x14 -#define GPIO_POL 0x18 -#define GPIO_EN 0x1C - -/*interrupt controller */ -#define IRQC_VIRT (IO_VIRT + 0x24000) -/* register offset interrupt controller */ -#define IRQC_IER 0x00 -#define IRQC_ISR 0x04 - -/* timer unit */ -#define TIMER_VIRT (IO_VIRT + 0x25000) -/* Register offsets timer unit */ -#define TM0_PERIOD 0x00 -#define TM0_COUNT 0x08 -#define TM0_CTRL 0x10 -#define TM1_PERIOD 0x20 -#define TM1_COUNT 0x28 -#define TM1_CTRL 0x30 -#define TM2_PERIOD 0x40 -#define TM2_COUNT 0x48 -#define TM2_CTRL 0x50 -#define TIMER_TOPCTRL 0x60 -#define TIMER_TOPSTAT 0x64 -#define T64_COUNTL 0x80 -#define T64_COUNTH 0x84 -#define T64_CTRL 0x88 -#define T64_BASEL 0x94 -#define T64_BASEH 0x98 -/* Bitmaks timer unit TOPSTAT reg */ -#define TSTAT_T0INT 0x1 -#define TSTAT_T1INT 0x2 -#define TSTAT_T2INT 0x4 -#define TSTAT_T3INT 0x8 -/* Bit description of TMx_CTRL register */ -#define TM_START 0x1 -#define TM_REPEAT 0x2 -#define TM_RESET 0x4 -/* Bit description of TIMER_CTRL register */ -#define ENABLE_TM0_INTR 0x1 -#define ENABLE_TM1_INTR 0x2 -#define ENABLE_TM2_INTR 0x4 -#define TIMER_ENABLE_BIT 0x8 -#define ENABLE_TIMER64 0x10 -#define ENABLE_TIMER64_INT 0x20 - -/* PMU & PLL */ -#define PMU_BASE (IO_VIRT + 0x1000) -#define PMU_MODE 0x00 -#define PMU_STAT 0x20 -#define PMU_PLL_CTRL 0x28 - -/* PMU Mode bits */ -#define PMU_MODE_SLOW 0x00 -#define PMU_MODE_RUN 0x01 -#define PMU_MODE_IDLE 0x02 -#define PMU_MODE_SLEEP 0x03 -#define PMU_MODE_INIT 0x04 -#define PMU_MODE_DEEPSLEEP 0x07 -#define PMU_MODE_WAKEUP 0x08 - -/* PMU ... */ -#define PLL_2_EN 0x8000 -#define PLL_1_EN 0x4000 -#define PLL_3_MUTE 0x0080 - -/* Control bits for PMU/ PLL */ -#define PMU_WARMRESET 0x00010000 -#define PLL_CTRL_MASK23 0x000080ff - -/* LCD Controller */ -#define LCD_BASE (IO_VIRT + 0x10000) -#define LCD_CTRL 0x00 -#define LCD_STATUS 0x04 -#define LCD_STATUS_M 0x08 -#define LCD_INTERRUPT 0x0C -#define LCD_DBAR 0x10 -#define LCD_DCAR 0x14 -#define LCD_TIMING0 0x20 -#define LCD_TIMING1 0x24 -#define LCD_TIMING2 0x28 -#define LCD_TEST 0x40 - -/* LCD Control Bits */ -#define LCD_CTRL_LCD_ENABLE 0x00000001 -/* Bits per pixel */ -#define LCD_CTRL_LCD_BPP_MASK 0x00000006 -#define LCD_CTRL_LCD_4BPP 0x00000000 -#define LCD_CTRL_LCD_8BPP 0x00000002 -#define LCD_CTRL_LCD_16BPP 0x00000004 -#define LCD_CTRL_LCD_BW 0x00000008 -#define LCD_CTRL_LCD_TFT 0x00000010 -#define LCD_CTRL_BGR 0x00001000 -#define LCD_CTRL_LCD_VCOMP 0x00080000 -#define LCD_CTRL_LCD_MONO8 0x00200000 -#define LCD_CTRL_LCD_PWR 0x00400000 -#define LCD_CTRL_LCD_BLE 0x00800000 -#define LCD_CTRL_LDBUSEN 0x01000000 - -/* Palette */ -#define LCD_PALETTE_BASE (IO_VIRT + 0x10400) - -/* Serial ports */ -#define SERIAL0_OFS 0x20000 -#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS) -#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS) - -#define SERIAL1_OFS 0x21000 -#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS) -#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS) - -#define SERIAL_ENABLE 0x30 -#define SERIAL_ENABLE_EN (1<<0) - -/* General defines to pacify gcc */ -#define PCIO_BASE (0) /* for inb, outb and friends */ -#define PCIO_VIRT PCIO_BASE - -#define __ASM_ARCH_HARDWARE_INCMACH_H -#include "boards.h" -#undef __ASM_ARCH_HARDWARE_INCMACH_H - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h deleted file mode 100644 index 68814828c9a7..000000000000 --- a/include/asm-arm/arch-h720x/io.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * - * 09-19-2001 JJKIM - * Created from linux/include/asm-arm/arch-l7200/io.h - * - * 03-27-2003 Robert Schwebel : - * re-unified header files for h720x - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-h720x/irqs.h b/include/asm-arm/arch-h720x/irqs.h deleted file mode 100644 index 8244413988be..000000000000 --- a/include/asm-arm/arch-h720x/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/irqs.h - * - * Copyright (C) 2000 Jungjun Kim - * (C) 2003 Robert Schwebel - * (C) 2003 Thomas Gleixner - * - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#if defined (CONFIG_CPU_H7201) - -#define IRQ_PMU 0 /* 0x000001 */ -#define IRQ_DMA 1 /* 0x000002 */ -#define IRQ_LCD 2 /* 0x000004 */ -#define IRQ_VGA 3 /* 0x000008 */ -#define IRQ_PCMCIA1 4 /* 0x000010 */ -#define IRQ_PCMCIA2 5 /* 0x000020 */ -#define IRQ_AFE 6 /* 0x000040 */ -#define IRQ_AIC 7 /* 0x000080 */ -#define IRQ_KEYBOARD 8 /* 0x000100 */ -#define IRQ_TIMER0 9 /* 0x000200 */ -#define IRQ_RTC 10 /* 0x000400 */ -#define IRQ_SOUND 11 /* 0x000800 */ -#define IRQ_USB 12 /* 0x001000 */ -#define IRQ_IrDA 13 /* 0x002000 */ -#define IRQ_UART0 14 /* 0x004000 */ -#define IRQ_UART1 15 /* 0x008000 */ -#define IRQ_SPI 16 /* 0x010000 */ -#define IRQ_GPIOA 17 /* 0x020000 */ -#define IRQ_GPIOB 18 /* 0x040000 */ -#define IRQ_GPIOC 19 /* 0x080000 */ -#define IRQ_GPIOD 20 /* 0x100000 */ -#define IRQ_CommRX 21 /* 0x200000 */ -#define IRQ_CommTX 22 /* 0x400000 */ -#define IRQ_Soft 23 /* 0x800000 */ - -#define NR_GLBL_IRQS 24 - -#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x) -#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x) -#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x) -#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x) -#define NR_IRQS IRQ_CHAINED_GPIOD(32) - -/* Enable mask for multiplexed interrupts */ -#define IRQ_ENA_MUX (1<> 5) -#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32)) - -#endif diff --git a/include/asm-arm/arch-h720x/memory.h b/include/asm-arm/arch-h720x/memory.h deleted file mode 100644 index 53e923dba76e..000000000000 --- a/include/asm-arm/arch-h720x/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/memory.h - * - * Copyright (c) 2000 Jungjun Kim - * - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Page offset: - * ( 0xc0000000UL ) - */ -#define PHYS_OFFSET UL(0x40000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * There is something to do here later !, Mar 2000, Jungjun Kim - */ - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h deleted file mode 100644 index ddba93760b42..000000000000 --- a/include/asm-arm/arch-h720x/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/system.h - * - * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * linux/include/asm-arm/arch-h720x/system.h - * - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include - -static void arch_idle(void) -{ - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - nop(); - nop(); - CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; - nop(); - nop(); -} - - -static __inline__ void arch_reset(char mode) -{ - CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET; -} - -#endif diff --git a/include/asm-arm/arch-h720x/timex.h b/include/asm-arm/arch-h720x/timex.h deleted file mode 100644 index 48a391c4080f..000000000000 --- a/include/asm-arm/arch-h720x/timex.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/timex.h - * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX -#define __ASM_ARCH_TIMEX - -#define CLOCK_TICK_RATE 3686400 - -#endif diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h deleted file mode 100644 index 61584cd5f425..000000000000 --- a/include/asm-arm/arch-h720x/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/uncompress.h - * - * Copyright (C) 2001-2002 Jungjun Kim - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include - -#define LSR 0x14 -#define TEMPTY 0x40 - -static inline void putc(int c) -{ - volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0) - barrier(); - - /* write next character */ - *p = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-h720x/vmalloc.h b/include/asm-arm/arch-h720x/vmalloc.h deleted file mode 100644 index b4693cb821ef..000000000000 --- a/include/asm-arm/arch-h720x/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-h720x/vmalloc.h - */ - -#ifndef __ARCH_ARM_VMALLOC_H -#define __ARCH_ARM_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S deleted file mode 100644 index c611871643a2..000000000000 --- a/include/asm-arm/arch-imx/debug-macro.S +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/include/asm-arm/arch-imx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00000000 @ physical - movne \rx, #0xe0000000 @ virtual - orreq \rx, \rx, #0x00200000 @ physical - orr \rx, \rx, #0x00006000 @ UART1 offset - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h deleted file mode 100644 index 621ff2c730f2..000000000000 --- a/include/asm-arm/arch-imx/dma.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} imx_dma_prio; - -#define DMA_REQ_UART3_T 2 -#define DMA_REQ_UART3_R 3 -#define DMA_REQ_SSI2_T 4 -#define DMA_REQ_SSI2_R 5 -#define DMA_REQ_CSI_STAT 6 -#define DMA_REQ_CSI_R 7 -#define DMA_REQ_MSHC 8 -#define DMA_REQ_DSPA_DCT_DOUT 9 -#define DMA_REQ_DSPA_DCT_DIN 10 -#define DMA_REQ_DSPA_MAC 11 -#define DMA_REQ_EXT 12 -#define DMA_REQ_SDHC 13 -#define DMA_REQ_SPI1_R 14 -#define DMA_REQ_SPI1_T 15 -#define DMA_REQ_SSI_T 16 -#define DMA_REQ_SSI_R 17 -#define DMA_REQ_ASP_DAC 18 -#define DMA_REQ_ASP_ADC 19 -#define DMA_REQ_USP_EP(x) (20+(x)) -#define DMA_REQ_SPI2_R 26 -#define DMA_REQ_SPI2_T 27 -#define DMA_REQ_UART2_T 28 -#define DMA_REQ_UART2_R 29 -#define DMA_REQ_UART1_T 30 -#define DMA_REQ_UART1_R 31 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S deleted file mode 100644 index 5dc0f307c1bb..000000000000 --- a/include/asm-arm/arch-imx/entry-macro.S +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-imx/entry-macro.S - * - * Low-level IRQ helper macros for iMX-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - -#define AITC_NIVECSR 0x40 - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(IMX_AITC_BASE) - @ Load offset & priority of the highest priority - @ interrupt pending. - ldr \irqstat, [\base, #AITC_NIVECSR] - @ Shift off the priority leaving the offset or - @ "interrupt number", use arithmetic shift to - @ transform illegal source (0xffff) as -1 - mov \irqnr, \irqstat, asr #16 - adds \tmp, \irqnr, #1 - .endm diff --git a/include/asm-arm/arch-imx/gpio.h b/include/asm-arm/arch-imx/gpio.h deleted file mode 100644 index 486023263f32..000000000000 --- a/include/asm-arm/arch-imx/gpio.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef _IMX_GPIO_H - -#include - -#define IMX_GPIO_ALLOC_MODE_NORMAL 0 -#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define IMX_GPIO_ALLOC_MODE_RELEASE 8 - -extern int imx_gpio_request(unsigned gpio, const char *label); - -extern void imx_gpio_free(unsigned gpio); - -extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -extern int imx_gpio_direction_input(unsigned gpio); - -extern int imx_gpio_direction_output(unsigned gpio, int value); - -extern void __imx_gpio_set_value(unsigned gpio, int value); - -static inline int imx_gpio_get_value(unsigned gpio) -{ - return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK)); -} - -static inline void imx_gpio_set_value_inline(unsigned gpio, int value) -{ - unsigned long flags; - - raw_local_irq_save(flags); - if(value) - DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK)); - else - DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK)); - raw_local_irq_restore(flags); -} - -static inline void imx_gpio_set_value(unsigned gpio, int value) -{ - if(__builtin_constant_p(gpio)) - imx_gpio_set_value_inline(gpio, value); - else - __imx_gpio_set_value(gpio, value); -} - -extern int imx_gpio_to_irq(unsigned gpio); - -extern int imx_irq_to_gpio(unsigned irq); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions - * to allow future extension of GPIO logic. - */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return imx_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - imx_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return imx_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return imx_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return imx_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - imx_gpio_set_value(gpio, value); -} - -#include /* cansleep wrappers */ - -static inline int gpio_to_irq(unsigned gpio) -{ - return imx_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return imx_irq_to_gpio(irq); -} - - -#endif diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h deleted file mode 100644 index 6542ca5e8c33..000000000000 --- a/include/asm-arm/arch-imx/hardware.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/hardware.h - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include "imx-regs.h" - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) - -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -#endif - -/* - * Memory map - */ - -#define IMX_IO_PHYS 0x00200000 -#define IMX_IO_SIZE 0x00100000 -#define IMX_IO_BASE 0xe0000000 - -#define IMX_CS0_PHYS 0x10000000 -#define IMX_CS0_SIZE 0x02000000 -#define IMX_CS0_VIRT 0xe8000000 - -#define IMX_CS1_PHYS 0x12000000 -#define IMX_CS1_SIZE 0x01000000 -#define IMX_CS1_VIRT 0xea000000 - -#define IMX_CS2_PHYS 0x13000000 -#define IMX_CS2_SIZE 0x01000000 -#define IMX_CS2_VIRT 0xeb000000 - -#define IMX_CS3_PHYS 0x14000000 -#define IMX_CS3_SIZE 0x01000000 -#define IMX_CS3_VIRT 0xec000000 - -#define IMX_CS4_PHYS 0x15000000 -#define IMX_CS4_SIZE 0x01000000 -#define IMX_CS4_VIRT 0xed000000 - -#define IMX_CS5_PHYS 0x16000000 -#define IMX_CS5_SIZE 0x01000000 -#define IMX_CS5_VIRT 0xee000000 - -#define IMX_FB_VIRT 0xF1000000 -#define IMX_FB_SIZE (256*1024) - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -#ifndef __ASSEMBLY__ -/* - * Handy routine to set GPIO functions - */ -extern void imx_gpio_mode( int gpio_mode ); - -#endif - -#define MAXIRQNUM 62 -#define MAXFIQNUM 62 -#define MAXSWINUM 62 - -/* - * Use SDRAM for memory - */ -#define MEM_SIZE 0x01000000 - -#ifdef CONFIG_ARCH_MX1ADS -#include "mx1ads.h" -#endif - -#endif diff --git a/include/asm-arm/arch-imx/imx-dma.h b/include/asm-arm/arch-imx/imx-dma.h deleted file mode 100644 index 44d89c35539a..000000000000 --- a/include/asm-arm/arch-imx/imx-dma.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/include/asm-arm/imxads/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#ifndef __ASM_ARCH_IMX_DMA_H -#define __ASM_ARCH_IMX_DMA_H - -#define IMX_DMA_CHANNELS 11 - -/* - * struct imx_dma_channel - i.MX specific DMA extension - * @name: name specified by DMA client - * @irq_handler: client callback for end of transfer - * @err_handler: client callback for error condition - * @data: clients context data for callbacks - * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE - * @sg: pointer to the actual read/written chunk for scatter-gather emulation - * @sgbc: counter of processed bytes in the actual read/written chunk - * @resbytes: total residual number of bytes to transfer - * (it can be lower or same as sum of SG mapped chunk sizes) - * @sgcount: number of chunks to be read/written - * - * Structure is used for IMX DMA processing. It would be probably good - * @struct dma_struct in the future for external interfacing and use - * @struct imx_dma_channel only as extension to it. - */ - -struct imx_dma_channel { - const char *name; - void (*irq_handler) (int, void *); - void (*err_handler) (int, void *, int errcode); - void *data; - dmamode_t dma_mode; - struct scatterlist *sg; - unsigned int sgbc; - unsigned int sgcount; - unsigned int resbytes; - int dma_num; -}; - -extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS]; - -#define IMX_DMA_ERR_BURST 1 -#define IMX_DMA_ERR_REQUEST 2 -#define IMX_DMA_ERR_TRANSFER 4 -#define IMX_DMA_ERR_BUFFER 8 - -/* The type to distinguish channel numbers parameter from ordinal int type */ -typedef int imx_dmach_t; - -int -imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, - unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode); - -int -imx_dma_setup_sg(imx_dmach_t dma_ch, - struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length, - unsigned int dev_addr, dmamode_t dmamode); - -int -imx_dma_setup_handlers(imx_dmach_t dma_ch, - void (*irq_handler) (int, void *), - void (*err_handler) (int, void *, int), void *data); - -void imx_dma_enable(imx_dmach_t dma_ch); - -void imx_dma_disable(imx_dmach_t dma_ch); - -int imx_dma_request(imx_dmach_t dma_ch, const char *name); - -void imx_dma_free(imx_dmach_t dma_ch); - -imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio); - - -#endif /* _ASM_ARCH_IMX_DMA_H */ diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h deleted file mode 100644 index fb9de2733879..000000000000 --- a/include/asm-arm/arch-imx/imx-regs.h +++ /dev/null @@ -1,482 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * Interrupt controller - */ - -#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) -#define INTCNTL_FIAD (1<<19) -#define INTCNTL_NIAD (1<<20) - -#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) -#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) -#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) -#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) -#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) - -/* - * General purpose timers - */ -#define IMX_TCTL(x) __REG( 0x00 + (x)) -#define TCTL_SWR (1<<15) -#define TCTL_FRR (1<<8) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_OM (1<<5) -#define TCTL_IRQEN (1<<4) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_16 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) -#define TCTL_TEN (1<<0) - -#define IMX_TPRER(x) __REG( 0x04 + (x)) -#define IMX_TCMP(x) __REG( 0x08 + (x)) -#define IMX_TCR(x) __REG( 0x0C + (x)) -#define IMX_TCN(x) __REG( 0x10 + (x)) -#define IMX_TSTAT(x) __REG( 0x14 + (x)) -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -/* - * LCD Controller - */ - -#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) - -#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) -#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) -#define SIZE_YMAX(y) ( (y) & 0x1ff ) - -#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) -#define VPW_VPW(x) ( (x) & 0x3ff ) - -#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) -#define CPOS_CC1 (1<<31) -#define CPOS_CC0 (1<<30) -#define CPOS_OP (1<<28) -#define CPOS_CXP(x) (((x) & 3ff) << 16) -#define CPOS_CYP(y) ((y) & 0x1ff) - -#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) -#define LCWHB_BK_EN (1<<31) -#define LCWHB_CW(w) (((w) & 0x1f) << 24) -#define LCWHB_CH(h) (((h) & 0x1f) << 16) -#define LCWHB_BD(x) ((x) & 0xff) - -#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) -#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) -#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) -#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) - -#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) -#define PCR_TFT (1<<31) -#define PCR_COLOR (1<<30) -#define PCR_PBSIZ_1 (0<<28) -#define PCR_PBSIZ_2 (1<<28) -#define PCR_PBSIZ_4 (2<<28) -#define PCR_PBSIZ_8 (3<<28) -#define PCR_BPIX_1 (0<<25) -#define PCR_BPIX_2 (1<<25) -#define PCR_BPIX_4 (2<<25) -#define PCR_BPIX_8 (3<<25) -#define PCR_BPIX_12 (4<<25) -#define PCR_BPIX_16 (4<<25) -#define PCR_PIXPOL (1<<24) -#define PCR_FLMPOL (1<<23) -#define PCR_LPPOL (1<<22) -#define PCR_CLKPOL (1<<21) -#define PCR_OEPOL (1<<20) -#define PCR_SCLKIDLE (1<<19) -#define PCR_END_SEL (1<<18) -#define PCR_END_BYTE_SWAP (1<<17) -#define PCR_REV_VS (1<<16) -#define PCR_ACD_SEL (1<<15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1<<7) -#define PCR_SHARP (1<<6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) -#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) -#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) -#define HCR_H_WAIT_2(x) ((x) & 0xff) - -#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) -#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) -#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) -#define VCR_V_WAIT_2(x) ((x) & 0xff) - -#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) -#define POS_POS(x) ((x) & 1f) - -#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1<<15) -#define PWMR_SCR1 (1<<10) -#define PWMR_SCR0 (1<<9) -#define PWMR_CC_EN (1<<8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) -#define DMACR_BURST (1<<31) -#define DMACR_HM(x) (((x) & 0xf) << 16) -#define DMACR_TM(x) ((x) &0xf) - -#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) -#define RMCR_LCDC_EN (1<<1) -#define RMCR_SELF_REF (1<<0) - -#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) -#define LCDICR_INT_SYN (1<<2) -#define LCDICR_INT_CON (1) - -#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) -#define LCDISR_UDR_ERR (1<<3) -#define LCDISR_ERR_RES (1<<2) -#define LCDISR_EOF (1<<1) -#define LCDISR_BOF (1<<0) - -#endif // _IMX_REGS_H diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h deleted file mode 100644 index d54eb1d48026..000000000000 --- a/include/asm-arm/arch-imx/imx-uart.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - void (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -#endif diff --git a/include/asm-arm/arch-imx/imxfb.h b/include/asm-arm/arch-imx/imxfb.h deleted file mode 100644 index 3ed9ec8b9f00..000000000000 --- a/include/asm-arm/arch-imx/imxfb.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This structure describes the machine which we are running on. - */ -struct imxfb_mach_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_int nonstd; - u_char bpp; - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - u_int cmap_greyscale:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - u_int pcr; - u_int pwmr; - u_int lscr1; - u_int dmacr; - - u_char * fixed_screen_cpu; - dma_addr_t fixed_screen_dma; - - void (*lcd_power)(int); - void (*backlight_power)(int); -}; -void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info); diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h deleted file mode 100644 index 1a1d9bb88631..000000000000 --- a/include/asm-arm/arch-imx/io.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h deleted file mode 100644 index 238197cfb9d9..000000000000 --- a/include/asm-arm/arch-imx/irqs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ARM_IRQS_H__ -#define __ARM_IRQS_H__ - -/* Use the imx definitions */ -#include - -/* - * IMX Interrupt numbers - * - */ -#define INT_SOFTINT 0 -#define CSI_INT 6 -#define DSPA_MAC_INT 7 -#define DSPA_INT 8 -#define COMP_INT 9 -#define MSHC_XINT 10 -#define GPIO_INT_PORTA 11 -#define GPIO_INT_PORTB 12 -#define GPIO_INT_PORTC 13 -#define LCDC_INT 14 -#define SIM_INT 15 -#define SIM_DATA_INT 16 -#define RTC_INT 17 -#define RTC_SAMINT 18 -#define UART2_MINT_PFERR 19 -#define UART2_MINT_RTS 20 -#define UART2_MINT_DTR 21 -#define UART2_MINT_UARTC 22 -#define UART2_MINT_TX 23 -#define UART2_MINT_RX 24 -#define UART1_MINT_PFERR 25 -#define UART1_MINT_RTS 26 -#define UART1_MINT_DTR 27 -#define UART1_MINT_UARTC 28 -#define UART1_MINT_TX 29 -#define UART1_MINT_RX 30 -#define VOICE_DAC_INT 31 -#define VOICE_ADC_INT 32 -#define PEN_DATA_INT 33 -#define PWM_INT 34 -#define SDHC_INT 35 -#define I2C_INT 39 -#define CSPI_INT 41 -#define SSI_TX_INT 42 -#define SSI_TX_ERR_INT 43 -#define SSI_RX_INT 44 -#define SSI_RX_ERR_INT 45 -#define TOUCH_INT 46 -#define USBD_INT0 47 -#define USBD_INT1 48 -#define USBD_INT2 49 -#define USBD_INT3 50 -#define USBD_INT4 51 -#define USBD_INT5 52 -#define USBD_INT6 53 -#define BTSYS_INT 55 -#define BTTIM_INT 56 -#define BTWUI_INT 57 -#define TIM2_INT 58 -#define TIM1_INT 59 -#define DMA_ERR 60 -#define DMA_INT 61 -#define GPIO_INT_PORTD 62 - -#define IMX_IRQS (64) - -/* note: the IMX has four gpio ports (A-D), but only - * the following pins are connected to the outside - * world: - * - * PORT A: bits 0-31 - * PORT B: bits 8-31 - * PORT C: bits 3-17 - * PORT D: bits 6-31 - * - * We map these interrupts straight on. As a result we have - * several holes in the interrupt mapping. We do this for two - * reasons: - * - mapping the interrupts without holes would get - * far more complicated - * - Motorola could well decide to bring some processor - * with more pins connected - */ - -#define IRQ_GPIOA(x) (IMX_IRQS + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) - -#define NR_IRQS (IRQ_GPIOD(32) + 1) -#define IRQ_GPIO(x) -#endif diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h deleted file mode 100644 index 5ad90127915f..000000000000 --- a/include/asm-arm/arch-imx/memory.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/memory.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H - -#define PHYS_OFFSET UL(0x08000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h deleted file mode 100644 index 4712f354dcca..000000000000 --- a/include/asm-arm/arch-imx/mmc.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include - -struct device; - -struct imxmmc_platform_data { - int (*card_present)(struct device *); - int (*get_ro)(struct device *); -}; - -extern void imx_set_mmc_info(struct imxmmc_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h deleted file mode 100644 index d90fa4b49ce1..000000000000 --- a/include/asm-arm/arch-imx/mx1ads.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/mx1ads.h - * - * Copyright (C) 2004 Robert Schwebel, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_MX1ADS_H -#define __ASM_ARCH_MX1ADS_H - -/* ------------------------------------------------------------------------ */ -/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ -/* ------------------------------------------------------------------------ */ - -#define MX1ADS_FLASH_PHYS 0x10000000 -#define MX1ADS_FLASH_SIZE (16*1024*1024) - -#define IMX_FB_PHYS (0x0C000000 - 0x40000) - -#define CLK32 32000 - -#endif /* __ASM_ARCH_MX1ADS_H */ diff --git a/include/asm-arm/arch-imx/spi_imx.h b/include/asm-arm/arch-imx/spi_imx.h deleted file mode 100644 index 2165449e976e..000000000000 --- a/include/asm-arm/arch-imx/spi_imx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * include/asm-arm/arch-imx/spi_imx.h - * - * Copyright (C) 2006 SWAPP - * Andrea Paterniani - * - * Initial version inspired by: - * linux-2.6.17-rc3-mm1/include/asm-arm/arch-pxa/pxa2xx_spi.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef SPI_IMX_H_ -#define SPI_IMX_H_ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @num_chipselect: chipselects are used to distinguish individual - * SPI slaves, and are numbered from zero to num_chipselects - 1. - * each slave has a chipselect signal, but it's common that not - * every chipselect is connected to a slave. - * @enable_dma: if true enables DMA driven transfers. -*/ -struct spi_imx_master { - u8 num_chipselect; - u8 enable_dma:1; -}; -/*-------------------------------------------------------------------------*/ - - -/*-------------------------------------------------------------------------*/ -/** - * struct spi_imx_chip - spi_board_info.controller_data for SPI - * slave devices, copied to spi_device.controller_data. - * @enable_loopback : used for test purpouse to internally connect RX and TX - * sections. - * @enable_dma : enables dma transfer (provided that controller driver has - * dma enabled too). - * @ins_ss_pulse : enable /SS pulse insertion between SPI burst. - * @bclk_wait : number of bclk waits between each bits_per_word SPI burst. - * @cs_control : function pointer to board-specific function to assert/deassert - * I/O port to control HW generation of devices chip-select. -*/ -struct spi_imx_chip { - u8 enable_loopback:1; - u8 enable_dma:1; - u8 ins_ss_pulse:1; - u16 bclk_wait:15; - void (*cs_control)(u32 control); -}; - -/* Chip-select state */ -#define SPI_CS_ASSERT (1 << 0) -#define SPI_CS_DEASSERT (1 << 1) -/*-------------------------------------------------------------------------*/ - - -#endif /* SPI_IMX_H_*/ diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h deleted file mode 100644 index c645fe9afb9d..000000000000 --- a/include/asm-arm/arch-imx/system.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -static void -arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void -arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h deleted file mode 100644 index e22ba789546c..000000000000 --- a/include/asm-arm/arch-imx/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/imx/timex.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE (16000000) - -#endif diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h deleted file mode 100644 index da333f69136f..000000000000 --- a/include/asm-arm/arch-imx/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * linux/include/asm-arm/arch-imxads/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define UART1_BASE 0x206000 -#define UART2_BASE 0x207000 -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = UART1_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - serial_port = UART2_BASE; - if ( UART(UCR1) & UCR1_UARTEN ) - break; - return; - } while(0); - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h deleted file mode 100644 index cb6169127068..000000000000 --- a/include/asm-arm/arch-imx/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-imx/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-integrator/bits.h b/include/asm-arm/arch-integrator/bits.h deleted file mode 100644 index 09b024e0496a..000000000000 --- a/include/asm-arm/arch-integrator/bits.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Bit field definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -#endif - -/* END */ diff --git a/include/asm-arm/arch-integrator/cm.h b/include/asm-arm/arch-integrator/cm.h deleted file mode 100644 index 1ab353e23595..000000000000 --- a/include/asm-arm/arch-integrator/cm.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * update the core module control register. - */ -void cm_control(u32, u32); - -#define CM_CTRL_LED (1 << 0) -#define CM_CTRL_nMBDET (1 << 1) -#define CM_CTRL_REMAP (1 << 2) -#define CM_CTRL_RESET (1 << 3) - -/* - * Integrator/AP,PP2 specific - */ -#define CM_CTRL_HIGHVECTORS (1 << 4) -#define CM_CTRL_BIGENDIAN (1 << 5) -#define CM_CTRL_FASTBUS (1 << 6) -#define CM_CTRL_SYNC (1 << 7) - -/* - * ARM926/946/966 Integrator/CP specific - */ -#define CM_CTRL_LCDBIASEN (1 << 8) -#define CM_CTRL_LCDBIASUP (1 << 9) -#define CM_CTRL_LCDBIASDN (1 << 10) -#define CM_CTRL_LCDMUXSEL_MASK (7 << 11) -#define CM_CTRL_LCDMUXSEL_GENLCD (1 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_16BPP (2 << 11) -#define CM_CTRL_LCDMUXSEL_SHARPLCD (3 << 11) -#define CM_CTRL_LCDMUXSEL_VGA_8421BPP (4 << 11) -#define CM_CTRL_LCDEN0 (1 << 14) -#define CM_CTRL_LCDEN1 (1 << 15) -#define CM_CTRL_STATIC1 (1 << 16) -#define CM_CTRL_STATIC2 (1 << 17) -#define CM_CTRL_STATIC (1 << 18) -#define CM_CTRL_n24BITEN (1 << 19) -#define CM_CTRL_EBIWP (1 << 20) diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S deleted file mode 100644 index 85b327c352df..000000000000 --- a/include/asm-arm/arch-integrator/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-integrator/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x16000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x16000000 >> 4 - .endm - -#include diff --git a/include/asm-arm/arch-integrator/dma.h b/include/asm-arm/arch-integrator/dma.h deleted file mode 100644 index 83fd6bbaf9d3..000000000000 --- a/include/asm-arm/arch-integrator/dma.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/dma.h - * - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-integrator/entry-macro.S b/include/asm-arm/arch-integrator/entry-macro.S deleted file mode 100644 index ef535a68bdd3..000000000000 --- a/include/asm-arm/arch-integrator/entry-macro.S +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-integrator/entry-macro.S - * - * Low-level IRQ helper macros for Integrator platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* FIXME: should not be using soo many LDRs here */ - ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE) - mov \irqnr, #IRQ_PIC_START - ldr \irqstat, [\base, #IRQ_STATUS] @ get masked status - ldr \base, =IO_ADDRESS(INTEGRATOR_HDR_BASE) - teq \irqstat, #0 - ldreq \irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)] - moveq \irqnr, #IRQ_CIC_START - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - .endm - diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h deleted file mode 100644 index 6f0947bc500d..000000000000 --- a/include/asm-arm/arch-integrator/hardware.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/hardware.h - * - * This file contains the hardware definitions of the Integrator. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* - * Where in virtual memory the IO devices (timers, system controllers - * and so on) - */ -#define IO_BASE 0xF0000000 // VA of IO -#define IO_SIZE 0x0B000000 // How much? -#define IO_START INTEGRATOR_HDR_BASE // PA of IO - -#define PCIO_BASE PCI_IO_VADDR -#define PCIMEM_BASE PCI_MEMORY_VADDR - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x00100000 - -#endif - diff --git a/include/asm-arm/arch-integrator/impd1.h b/include/asm-arm/arch-integrator/impd1.h deleted file mode 100644 index d75de4b14237..000000000000 --- a/include/asm-arm/arch-integrator/impd1.h +++ /dev/null @@ -1,18 +0,0 @@ -#define IMPD1_OSC1 0x00 -#define IMPD1_OSC2 0x04 -#define IMPD1_LOCK 0x08 -#define IMPD1_LEDS 0x0c -#define IMPD1_INT 0x10 -#define IMPD1_SW 0x14 -#define IMPD1_CTRL 0x18 - -#define IMPD1_CTRL_DISP_LCD (0 << 0) -#define IMPD1_CTRL_DISP_VGA (1 << 0) -#define IMPD1_CTRL_DISP_LCD1 (2 << 0) -#define IMPD1_CTRL_DISP_ENABLE (1 << 2) -#define IMPD1_CTRL_DISP_MASK (7 << 0) - -struct device; - -void impd1_tweak_control(struct device *dev, u32 mask, u32 val); - diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h deleted file mode 100644 index c8f2175948bd..000000000000 --- a/include/asm-arm/arch-integrator/io.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffff - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-integrator/irqs.h b/include/asm-arm/arch-integrator/irqs.h deleted file mode 100644 index ba7b3afee445..000000000000 --- a/include/asm-arm/arch-integrator/irqs.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/irqs.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Interrupt numbers - */ -#define IRQ_PIC_START 0 -#define IRQ_SOFTINT 0 -#define IRQ_UARTINT0 1 -#define IRQ_UARTINT1 2 -#define IRQ_KMIINT0 3 -#define IRQ_KMIINT1 4 -#define IRQ_TIMERINT0 5 -#define IRQ_TIMERINT1 6 -#define IRQ_TIMERINT2 7 -#define IRQ_RTCINT 8 -#define IRQ_AP_EXPINT0 9 -#define IRQ_AP_EXPINT1 10 -#define IRQ_AP_EXPINT2 11 -#define IRQ_AP_EXPINT3 12 -#define IRQ_AP_PCIINT0 13 -#define IRQ_AP_PCIINT1 14 -#define IRQ_AP_PCIINT2 15 -#define IRQ_AP_PCIINT3 16 -#define IRQ_AP_V3INT 17 -#define IRQ_AP_CPINT0 18 -#define IRQ_AP_CPINT1 19 -#define IRQ_AP_LBUSTIMEOUT 20 -#define IRQ_AP_APCINT 21 -#define IRQ_CP_CLCDCINT 22 -#define IRQ_CP_MMCIINT0 23 -#define IRQ_CP_MMCIINT1 24 -#define IRQ_CP_AACIINT 25 -#define IRQ_CP_CPPLDINT 26 -#define IRQ_CP_ETHINT 27 -#define IRQ_CP_TSPENINT 28 -#define IRQ_PIC_END 31 - -#define IRQ_CIC_START 32 -#define IRQ_CM_SOFTINT 32 -#define IRQ_CM_COMMRX 33 -#define IRQ_CM_COMMTX 34 -#define IRQ_CIC_END 34 - -/* - * IntegratorCP only - */ -#define IRQ_SIC_START 35 -#define IRQ_SIC_CP_SOFTINT 35 -#define IRQ_SIC_CP_RI0 36 -#define IRQ_SIC_CP_RI1 37 -#define IRQ_SIC_CP_CARDIN 38 -#define IRQ_SIC_CP_LMINT0 39 -#define IRQ_SIC_CP_LMINT1 40 -#define IRQ_SIC_CP_LMINT2 41 -#define IRQ_SIC_CP_LMINT3 42 -#define IRQ_SIC_CP_LMINT4 43 -#define IRQ_SIC_CP_LMINT5 44 -#define IRQ_SIC_CP_LMINT6 45 -#define IRQ_SIC_CP_LMINT7 46 -#define IRQ_SIC_END 46 - -#define NR_IRQS 47 - diff --git a/include/asm-arm/arch-integrator/lm.h b/include/asm-arm/arch-integrator/lm.h deleted file mode 100644 index 28186b6f2c09..000000000000 --- a/include/asm-arm/arch-integrator/lm.h +++ /dev/null @@ -1,23 +0,0 @@ - -struct lm_device { - struct device dev; - struct resource resource; - unsigned int irq; - unsigned int id; -}; - -struct lm_driver { - struct device_driver drv; - int (*probe)(struct lm_device *); - void (*remove)(struct lm_device *); - int (*suspend)(struct lm_device *, pm_message_t); - int (*resume)(struct lm_device *); -}; - -int lm_driver_register(struct lm_driver *drv); -void lm_driver_unregister(struct lm_driver *drv); - -int lm_device_register(struct lm_device *dev); - -#define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev) -#define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d) diff --git a/include/asm-arm/arch-integrator/memory.h b/include/asm-arm/arch-integrator/memory.h deleted file mode 100644 index 1ab56d783e7c..000000000000 --- a/include/asm-arm/arch-integrator/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/memory.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x80000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET) -#define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h deleted file mode 100644 index 83c4c1ceb411..000000000000 --- a/include/asm-arm/arch-integrator/platform.h +++ /dev/null @@ -1,469 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/************************************************************************** - * * Copyright © ARM Limited 1998. All rights reserved. - * ***********************************************************************/ -/* ************************************************************************ - * - * Integrator address map - * - * NOTE: This is a multi-hosted header file for use with uHAL and - * supported debuggers. - * - * $Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $ - * - * ***********************************************************************/ - -#ifndef __address_h -#define __address_h 1 - -/* ======================================================================== - * Integrator definitions - * ======================================================================== - * ------------------------------------------------------------------------ - * Memory definitions - * ------------------------------------------------------------------------ - * Integrator memory map - * - */ -#define INTEGRATOR_BOOT_ROM_LO 0x00000000 -#define INTEGRATOR_BOOT_ROM_HI 0x20000000 -#define INTEGRATOR_BOOT_ROM_BASE INTEGRATOR_BOOT_ROM_HI /* Normal position */ -#define INTEGRATOR_BOOT_ROM_SIZE SZ_512K - -/* - * New Core Modules have different amounts of SSRAM, the amount of SSRAM - * fitted can be found in HDR_STAT. - * - * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to - * the minimum amount of SSRAM fitted on any core module. - * - * New Core Modules also alias the SSRAM. - * - */ -#define INTEGRATOR_SSRAM_BASE 0x00000000 -#define INTEGRATOR_SSRAM_ALIAS_BASE 0x10800000 -#define INTEGRATOR_SSRAM_SIZE SZ_256K - -#define INTEGRATOR_FLASH_BASE 0x24000000 -#define INTEGRATOR_FLASH_SIZE SZ_32M - -#define INTEGRATOR_MBRD_SSRAM_BASE 0x28000000 -#define INTEGRATOR_MBRD_SSRAM_SIZE SZ_512K - -/* - * SDRAM is a SIMM therefore the size is not known. - * - */ -#define INTEGRATOR_SDRAM_BASE 0x00040000 - -#define INTEGRATOR_SDRAM_ALIAS_BASE 0x80000000 -#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000 -#define INTEGRATOR_HDR1_SDRAM_BASE 0x90000000 -#define INTEGRATOR_HDR2_SDRAM_BASE 0xA0000000 -#define INTEGRATOR_HDR3_SDRAM_BASE 0xB0000000 - -/* - * Logic expansion modules - * - */ -#define INTEGRATOR_LOGIC_MODULES_BASE 0xC0000000 -#define INTEGRATOR_LOGIC_MODULE0_BASE 0xC0000000 -#define INTEGRATOR_LOGIC_MODULE1_BASE 0xD0000000 -#define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000 -#define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000 - -/* ------------------------------------------------------------------------ - * Integrator header card registers - * ------------------------------------------------------------------------ - * - */ -#define INTEGRATOR_HDR_ID_OFFSET 0x00 -#define INTEGRATOR_HDR_PROC_OFFSET 0x04 -#define INTEGRATOR_HDR_OSC_OFFSET 0x08 -#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C -#define INTEGRATOR_HDR_STAT_OFFSET 0x10 -#define INTEGRATOR_HDR_LOCK_OFFSET 0x14 -#define INTEGRATOR_HDR_SDRAM_OFFSET 0x20 -#define INTEGRATOR_HDR_INIT_OFFSET 0x24 /* CM9x6 */ -#define INTEGRATOR_HDR_IC_OFFSET 0x40 -#define INTEGRATOR_HDR_SPDBASE_OFFSET 0x100 -#define INTEGRATOR_HDR_SPDTOP_OFFSET 0x200 - -#define INTEGRATOR_HDR_BASE 0x10000000 -#define INTEGRATOR_HDR_ID (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET) -#define INTEGRATOR_HDR_PROC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET) -#define INTEGRATOR_HDR_OSC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET) -#define INTEGRATOR_HDR_CTRL (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET) -#define INTEGRATOR_HDR_STAT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET) -#define INTEGRATOR_HDR_LOCK (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET) -#define INTEGRATOR_HDR_SDRAM (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET) -#define INTEGRATOR_HDR_INIT (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET) -#define INTEGRATOR_HDR_IC (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET) -#define INTEGRATOR_HDR_SPDBASE (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET) -#define INTEGRATOR_HDR_SPDTOP (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET) - -#define INTEGRATOR_HDR_CTRL_LED 0x01 -#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02 -#define INTEGRATOR_HDR_CTRL_REMAP 0x04 -#define INTEGRATOR_HDR_CTRL_RESET 0x08 -#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10 -#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN 0x20 -#define INTEGRATOR_HDR_CTRL_FASTBUS 0x40 -#define INTEGRATOR_HDR_CTRL_SYNC 0x80 - -#define INTEGRATOR_HDR_OSC_CORE_10MHz 0x102 -#define INTEGRATOR_HDR_OSC_CORE_15MHz 0x107 -#define INTEGRATOR_HDR_OSC_CORE_20MHz 0x10C -#define INTEGRATOR_HDR_OSC_CORE_25MHz 0x111 -#define INTEGRATOR_HDR_OSC_CORE_30MHz 0x116 -#define INTEGRATOR_HDR_OSC_CORE_35MHz 0x11B -#define INTEGRATOR_HDR_OSC_CORE_40MHz 0x120 -#define INTEGRATOR_HDR_OSC_CORE_45MHz 0x125 -#define INTEGRATOR_HDR_OSC_CORE_50MHz 0x12A -#define INTEGRATOR_HDR_OSC_CORE_55MHz 0x12F -#define INTEGRATOR_HDR_OSC_CORE_60MHz 0x134 -#define INTEGRATOR_HDR_OSC_CORE_65MHz 0x139 -#define INTEGRATOR_HDR_OSC_CORE_70MHz 0x13E -#define INTEGRATOR_HDR_OSC_CORE_75MHz 0x143 -#define INTEGRATOR_HDR_OSC_CORE_80MHz 0x148 -#define INTEGRATOR_HDR_OSC_CORE_85MHz 0x14D -#define INTEGRATOR_HDR_OSC_CORE_90MHz 0x152 -#define INTEGRATOR_HDR_OSC_CORE_95MHz 0x157 -#define INTEGRATOR_HDR_OSC_CORE_100MHz 0x15C -#define INTEGRATOR_HDR_OSC_CORE_105MHz 0x161 -#define INTEGRATOR_HDR_OSC_CORE_110MHz 0x166 -#define INTEGRATOR_HDR_OSC_CORE_115MHz 0x16B -#define INTEGRATOR_HDR_OSC_CORE_120MHz 0x170 -#define INTEGRATOR_HDR_OSC_CORE_125MHz 0x175 -#define INTEGRATOR_HDR_OSC_CORE_130MHz 0x17A -#define INTEGRATOR_HDR_OSC_CORE_135MHz 0x17F -#define INTEGRATOR_HDR_OSC_CORE_140MHz 0x184 -#define INTEGRATOR_HDR_OSC_CORE_145MHz 0x189 -#define INTEGRATOR_HDR_OSC_CORE_150MHz 0x18E -#define INTEGRATOR_HDR_OSC_CORE_155MHz 0x193 -#define INTEGRATOR_HDR_OSC_CORE_160MHz 0x198 -#define INTEGRATOR_HDR_OSC_CORE_MASK 0x7FF - -#define INTEGRATOR_HDR_OSC_MEM_10MHz 0x10C000 -#define INTEGRATOR_HDR_OSC_MEM_15MHz 0x116000 -#define INTEGRATOR_HDR_OSC_MEM_20MHz 0x120000 -#define INTEGRATOR_HDR_OSC_MEM_25MHz 0x12A000 -#define INTEGRATOR_HDR_OSC_MEM_30MHz 0x134000 -#define INTEGRATOR_HDR_OSC_MEM_33MHz 0x13A000 -#define INTEGRATOR_HDR_OSC_MEM_40MHz 0x148000 -#define INTEGRATOR_HDR_OSC_MEM_50MHz 0x15C000 -#define INTEGRATOR_HDR_OSC_MEM_60MHz 0x170000 -#define INTEGRATOR_HDR_OSC_MEM_66MHz 0x17C000 -#define INTEGRATOR_HDR_OSC_MEM_MASK 0x7FF000 - -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0 0x0 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0 0x0800000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6 0x1000000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00 0x1800000 -#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK 0x1800000 - -#define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5) - - -/* ------------------------------------------------------------------------ - * Integrator system registers - * ------------------------------------------------------------------------ - * - */ - -/* - * System Controller - * - */ -#define INTEGRATOR_SC_ID_OFFSET 0x00 -#define INTEGRATOR_SC_OSC_OFFSET 0x04 -#define INTEGRATOR_SC_CTRLS_OFFSET 0x08 -#define INTEGRATOR_SC_CTRLC_OFFSET 0x0C -#define INTEGRATOR_SC_DEC_OFFSET 0x10 -#define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 -#define INTEGRATOR_SC_LOCK_OFFSET 0x1C - -#define INTEGRATOR_SC_BASE 0x11000000 -#define INTEGRATOR_SC_ID (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET) -#define INTEGRATOR_SC_OSC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET) -#define INTEGRATOR_SC_CTRLS (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET) -#define INTEGRATOR_SC_CTRLC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET) -#define INTEGRATOR_SC_DEC (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET) -#define INTEGRATOR_SC_ARB (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET) -#define INTEGRATOR_SC_PCIENABLE (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET) -#define INTEGRATOR_SC_LOCK (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET) - -#define INTEGRATOR_SC_OSC_SYS_10MHz 0x20 -#define INTEGRATOR_SC_OSC_SYS_15MHz 0x34 -#define INTEGRATOR_SC_OSC_SYS_20MHz 0x48 -#define INTEGRATOR_SC_OSC_SYS_25MHz 0x5C -#define INTEGRATOR_SC_OSC_SYS_33MHz 0x7C -#define INTEGRATOR_SC_OSC_SYS_MASK 0xFF - -#define INTEGRATOR_SC_OSC_PCI_25MHz 0x100 -#define INTEGRATOR_SC_OSC_PCI_33MHz 0x0 -#define INTEGRATOR_SC_OSC_PCI_MASK 0x100 - -#define INTEGRATOR_SC_CTRL_SOFTRST (1 << 0) -#define INTEGRATOR_SC_CTRL_nFLVPPEN (1 << 1) -#define INTEGRATOR_SC_CTRL_nFLWP (1 << 2) -#define INTEGRATOR_SC_CTRL_URTS0 (1 << 4) -#define INTEGRATOR_SC_CTRL_UDTR0 (1 << 5) -#define INTEGRATOR_SC_CTRL_URTS1 (1 << 6) -#define INTEGRATOR_SC_CTRL_UDTR1 (1 << 7) - -/* - * External Bus Interface - * - */ -#define INTEGRATOR_EBI_BASE 0x12000000 - -#define INTEGRATOR_EBI_CSR0_OFFSET 0x00 -#define INTEGRATOR_EBI_CSR1_OFFSET 0x04 -#define INTEGRATOR_EBI_CSR2_OFFSET 0x08 -#define INTEGRATOR_EBI_CSR3_OFFSET 0x0C -#define INTEGRATOR_EBI_LOCK_OFFSET 0x20 - -#define INTEGRATOR_EBI_CSR0 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET) -#define INTEGRATOR_EBI_CSR1 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) -#define INTEGRATOR_EBI_CSR2 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET) -#define INTEGRATOR_EBI_CSR3 (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET) -#define INTEGRATOR_EBI_LOCK (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) - -#define INTEGRATOR_EBI_8_BIT 0x00 -#define INTEGRATOR_EBI_16_BIT 0x01 -#define INTEGRATOR_EBI_32_BIT 0x02 -#define INTEGRATOR_EBI_WRITE_ENABLE 0x04 -#define INTEGRATOR_EBI_SYNC 0x08 -#define INTEGRATOR_EBI_WS_2 0x00 -#define INTEGRATOR_EBI_WS_3 0x10 -#define INTEGRATOR_EBI_WS_4 0x20 -#define INTEGRATOR_EBI_WS_5 0x30 -#define INTEGRATOR_EBI_WS_6 0x40 -#define INTEGRATOR_EBI_WS_7 0x50 -#define INTEGRATOR_EBI_WS_8 0x60 -#define INTEGRATOR_EBI_WS_9 0x70 -#define INTEGRATOR_EBI_WS_10 0x80 -#define INTEGRATOR_EBI_WS_11 0x90 -#define INTEGRATOR_EBI_WS_12 0xA0 -#define INTEGRATOR_EBI_WS_13 0xB0 -#define INTEGRATOR_EBI_WS_14 0xC0 -#define INTEGRATOR_EBI_WS_15 0xD0 -#define INTEGRATOR_EBI_WS_16 0xE0 -#define INTEGRATOR_EBI_WS_17 0xF0 - - -#define INTEGRATOR_CT_BASE 0x13000000 /* Counter/Timers */ -#define INTEGRATOR_IC_BASE 0x14000000 /* Interrupt Controller */ -#define INTEGRATOR_RTC_BASE 0x15000000 /* Real Time Clock */ -#define INTEGRATOR_UART0_BASE 0x16000000 /* UART 0 */ -#define INTEGRATOR_UART1_BASE 0x17000000 /* UART 1 */ -#define INTEGRATOR_KBD_BASE 0x18000000 /* Keyboard */ -#define INTEGRATOR_MOUSE_BASE 0x19000000 /* Mouse */ - -/* - * LED's & Switches - * - */ -#define INTEGRATOR_DBG_ALPHA_OFFSET 0x00 -#define INTEGRATOR_DBG_LEDS_OFFSET 0x04 -#define INTEGRATOR_DBG_SWITCH_OFFSET 0x08 - -#define INTEGRATOR_DBG_BASE 0x1A000000 -#define INTEGRATOR_DBG_ALPHA (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET) -#define INTEGRATOR_DBG_LEDS (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET) -#define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) - - -#if defined(CONFIG_ARCH_INTEGRATOR_AP) -#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ -#elif defined(CONFIG_ARCH_INTEGRATOR_CP) -#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ -#endif - -/* ------------------------------------------------------------------------ - * KMI keyboard/mouse definitions - * ------------------------------------------------------------------------ - */ -/* PS2 Keyboard interface */ -#define KMI0_BASE INTEGRATOR_KBD_BASE - -/* PS2 Mouse interface */ -#define KMI1_BASE INTEGRATOR_MOUSE_BASE - -/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */ - -/* ------------------------------------------------------------------------ - * Where in the memory map does PCI live? - * ------------------------------------------------------------------------ - * This represents a fairly liberal usage of address space. Even though - * the V3 only has two windows (therefore we need to map stuff on the fly), - * we maintain the same addresses, even if they're not mapped. - * - */ -#define PHYS_PCI_MEM_BASE 0x40000000 /* 512M to xxx */ -/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? - */ -#define PHYS_PCI_IO_BASE 0x60000000 /* 16M to xxx */ -/* unused (128-16)M from B1000000-B7FFFFFF - */ -#define PHYS_PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */ -/* unused ((128-16)M - 64K) from XXX - */ -#define PHYS_PCI_V3_BASE 0x62000000 - -#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE - -/* 'export' these to UHAL */ -#define UHAL_PCI_IO PCI_IO_BASE -#define UHAL_PCI_MEM PCI_MEM_BASE -#define UHAL_PCI_ALLOC_IO_BASE 0x00004000 -#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE -#define UHAL_PCI_MAX_SLOT 20 - -/* ======================================================================== - * Start of uHAL definitions - * ======================================================================== - */ - -/* ------------------------------------------------------------------------ - * Integrator Interrupt Controllers - * ------------------------------------------------------------------------ - * - * Offsets from interrupt controller base - * - * System Controller interrupt controller base is - * - * INTEGRATOR_IC_BASE + (header_number << 6) - * - * Core Module interrupt controller base is - * - * INTEGRATOR_HDR_IC - * - */ -#define IRQ_STATUS 0 -#define IRQ_RAW_STATUS 0x04 -#define IRQ_ENABLE 0x08 -#define IRQ_ENABLE_SET 0x08 -#define IRQ_ENABLE_CLEAR 0x0C - -#define INT_SOFT_SET 0x10 -#define INT_SOFT_CLEAR 0x14 - -#define FIQ_STATUS 0x20 -#define FIQ_RAW_STATUS 0x24 -#define FIQ_ENABLE 0x28 -#define FIQ_ENABLE_SET 0x28 -#define FIQ_ENABLE_CLEAR 0x2C - - -/* ------------------------------------------------------------------------ - * Interrupts - * ------------------------------------------------------------------------ - * - * - * Each Core Module has two interrupts controllers, one on the core module - * itself and one in the system controller on the motherboard. The - * READ_INT macro in target.s reads both interrupt controllers and returns - * a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller - * and bits 24 to 31 are from the core module. - * - * The following definitions relate to the bitmask returned by READ_INT. - * - */ - -/* ------------------------------------------------------------------------ - * LED's - The header LED is not accessible via the uHAL API - * ------------------------------------------------------------------------ - * - */ -#define GREEN_LED 0x01 -#define YELLOW_LED 0x02 -#define RED_LED 0x04 -#define GREEN_LED_2 0x08 -#define ALL_LEDS 0x0F - -#define LED_BANK INTEGRATOR_DBG_LEDS - -/* - * Memory definitions - run uHAL out of SSRAM. - * - */ -#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE - -/* - * Application Flash - * - */ -#define FLASH_BASE INTEGRATOR_FLASH_BASE -#define FLASH_SIZE INTEGRATOR_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE INTEGRATOR_BOOT_ROM_HI -#define EPROM_SIZE INTEGRATOR_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * Timer definitions - * - * Only use timer 1 & 2 - * (both run at 24MHz and will need the clock divider set to 16). - * - * Timer 0 runs at bus frequency and therefore could vary and currently - * uHAL can't handle that. - * - */ - -#define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE -#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100) -#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200) - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 24 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define INTEGRATOR_CSR_BASE 0x10000000 -#define INTEGRATOR_CSR_SIZE 0x10000000 - -#endif - -/* END */ diff --git a/include/asm-arm/arch-integrator/system.h b/include/asm-arm/arch-integrator/system.h deleted file mode 100644 index 8ea442237d20..000000000000 --- a/include/asm-arm/arch-integrator/system.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/system.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - cm_control(CM_CTRL_RESET, CM_CTRL_RESET); -} - -#endif diff --git a/include/asm-arm/arch-integrator/timex.h b/include/asm-arm/arch-integrator/timex.h deleted file mode 100644 index 87a762818ba2..000000000000 --- a/include/asm-arm/arch-integrator/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/timex.h - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * ?? - */ -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h deleted file mode 100644 index f61825c4d901..000000000000 --- a/include/asm-arm/arch-integrator/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008) -#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c) -#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010) -#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014) -#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018) - -/* - * This does not append a newline - */ -static void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-integrator/vmalloc.h b/include/asm-arm/arch-integrator/vmalloc.h deleted file mode 100644 index 170cccece523..000000000000 --- a/include/asm-arm/arch-integrator/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-integrator/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h deleted file mode 100644 index 26f60af67168..000000000000 --- a/include/asm-arm/arch-iop13xx/adma.h +++ /dev/null @@ -1,537 +0,0 @@ -/* - * Copyright(c) 2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -#ifndef _ADMA_H -#define _ADMA_H -#include -#include -#include -#include - -#define ADMA_ACCR(chan) (chan->mmr_base + 0x0) -#define ADMA_ACSR(chan) (chan->mmr_base + 0x4) -#define ADMA_ADAR(chan) (chan->mmr_base + 0x8) -#define ADMA_IIPCR(chan) (chan->mmr_base + 0x18) -#define ADMA_IIPAR(chan) (chan->mmr_base + 0x1c) -#define ADMA_IIPUAR(chan) (chan->mmr_base + 0x20) -#define ADMA_ANDAR(chan) (chan->mmr_base + 0x24) -#define ADMA_ADCR(chan) (chan->mmr_base + 0x28) -#define ADMA_CARMD(chan) (chan->mmr_base + 0x2c) -#define ADMA_ABCR(chan) (chan->mmr_base + 0x30) -#define ADMA_DLADR(chan) (chan->mmr_base + 0x34) -#define ADMA_DUADR(chan) (chan->mmr_base + 0x38) -#define ADMA_SLAR(src, chan) (chan->mmr_base + (0x3c + (src << 3))) -#define ADMA_SUAR(src, chan) (chan->mmr_base + (0x40 + (src << 3))) - -struct iop13xx_adma_src { - u32 src_addr; - union { - u32 upper_src_addr; - struct { - unsigned int pq_upper_src_addr:24; - unsigned int pq_dmlt:8; - }; - }; -}; - -struct iop13xx_adma_desc_ctrl { - unsigned int int_en:1; - unsigned int xfer_dir:2; - unsigned int src_select:4; - unsigned int zero_result:1; - unsigned int block_fill_en:1; - unsigned int crc_gen_en:1; - unsigned int crc_xfer_dis:1; - unsigned int crc_seed_fetch_dis:1; - unsigned int status_write_back_en:1; - unsigned int endian_swap_en:1; - unsigned int reserved0:2; - unsigned int pq_update_xfer_en:1; - unsigned int dual_xor_en:1; - unsigned int pq_xfer_en:1; - unsigned int p_xfer_dis:1; - unsigned int reserved1:10; - unsigned int relax_order_en:1; - unsigned int no_snoop_en:1; -}; - -struct iop13xx_adma_byte_count { - unsigned int byte_count:24; - unsigned int host_if:3; - unsigned int reserved:2; - unsigned int zero_result_err_q:1; - unsigned int zero_result_err:1; - unsigned int tx_complete:1; -}; - -struct iop13xx_adma_desc_hw { - u32 next_desc; - union { - u32 desc_ctrl; - struct iop13xx_adma_desc_ctrl desc_ctrl_field; - }; - union { - u32 crc_addr; - u32 block_fill_data; - u32 q_dest_addr; - }; - union { - u32 byte_count; - struct iop13xx_adma_byte_count byte_count_field; - }; - union { - u32 dest_addr; - u32 p_dest_addr; - }; - union { - u32 upper_dest_addr; - u32 pq_upper_dest_addr; - }; - struct iop13xx_adma_src src[1]; -}; - -struct iop13xx_adma_desc_dual_xor { - u32 next_desc; - u32 desc_ctrl; - u32 reserved; - u32 byte_count; - u32 h_dest_addr; - u32 h_upper_dest_addr; - u32 src0_addr; - u32 upper_src0_addr; - u32 src1_addr; - u32 upper_src1_addr; - u32 h_src_addr; - u32 h_upper_src_addr; - u32 d_src_addr; - u32 d_upper_src_addr; - u32 d_dest_addr; - u32 d_upper_dest_addr; -}; - -struct iop13xx_adma_desc_pq_update { - u32 next_desc; - u32 desc_ctrl; - u32 reserved; - u32 byte_count; - u32 p_dest_addr; - u32 p_upper_dest_addr; - u32 src0_addr; - u32 upper_src0_addr; - u32 src1_addr; - u32 upper_src1_addr; - u32 p_src_addr; - u32 p_upper_src_addr; - u32 q_src_addr; - struct { - unsigned int q_upper_src_addr:24; - unsigned int q_dmlt:8; - }; - u32 q_dest_addr; - u32 q_upper_dest_addr; -}; - -static inline int iop_adma_get_max_xor(void) -{ - return 16; -} - -static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan) -{ - return __raw_readl(ADMA_ADAR(chan)); -} - -static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan, - u32 next_desc_addr) -{ - __raw_writel(next_desc_addr, ADMA_ANDAR(chan)); -} - -#define ADMA_STATUS_BUSY (1 << 13) - -static inline char iop_chan_is_busy(struct iop_adma_chan *chan) -{ - if (__raw_readl(ADMA_ACSR(chan)) & - ADMA_STATUS_BUSY) - return 1; - else - return 0; -} - -static inline int -iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots) -{ - return 1; -} -#define iop_desc_is_aligned(x, y) 1 - -static inline int -iop_chan_memcpy_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s) - -static inline int -iop_chan_memset_slot_count(size_t len, int *slots_per_op) -{ - *slots_per_op = 1; - return 1; -} - -static inline int -iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) -{ - static const char slot_count_table[] = { 1, 2, 2, 2, - 2, 3, 3, 3, - 3, 4, 4, 4, - 4, 5, 5, 5, - }; - *slots_per_op = slot_count_table[src_cnt - 1]; - return *slots_per_op; -} - -#define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) -#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT -#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o) - -static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->dest_addr; -} - -static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->byte_count_field.byte_count; -} - -static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - int src_idx) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->src[src_idx].src_addr; -} - -static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->desc_ctrl_field.src_select + 1; -} - -static inline void -iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; -} - -static inline void -iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.block_fill_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; -} - -/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */ -static inline void -iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.src_select = src_cnt - 1; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; - -} -#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i) - -/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */ -static inline int -iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt, - unsigned long flags) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - union { - u32 value; - struct iop13xx_adma_desc_ctrl field; - } u_desc_ctrl; - - u_desc_ctrl.value = 0; - u_desc_ctrl.field.src_select = src_cnt - 1; - u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */ - u_desc_ctrl.field.zero_result = 1; - u_desc_ctrl.field.status_write_back_en = 1; - u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT; - hw_desc->desc_ctrl = u_desc_ctrl.value; - hw_desc->crc_addr = 0; - - return 1; -} - -static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - u32 byte_count) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->byte_count = byte_count; -} - -static inline void -iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len) -{ - int slots_per_op = desc->slots_per_op; - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter; - int i = 0; - - if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) { - hw_desc->byte_count = len; - } else { - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT; - i += slots_per_op; - } while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT); - - if (len) { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->byte_count = len; - } - } -} - - -static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan, - dma_addr_t addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->dest_addr = addr; - hw_desc->upper_dest_addr = 0; -} - -static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc, - dma_addr_t addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->src[0].src_addr = addr; - hw_desc->src[0].upper_src_addr = 0; -} - -static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc, - int src_idx, dma_addr_t addr) -{ - int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op; - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter; - int i = 0; - - do { - iter = iop_hw_desc_slot_idx(hw_desc, i); - iter->src[src_idx].src_addr = addr; - iter->src[src_idx].upper_src_addr = 0; - slot_cnt -= slots_per_op; - if (slot_cnt) { - i += slots_per_op; - addr += IOP_ADMA_XOR_MAX_BYTE_COUNT; - } - } while (slot_cnt); -} - -static inline void -iop_desc_init_interrupt(struct iop_adma_desc_slot *desc, - struct iop_adma_chan *chan) -{ - iop_desc_init_memcpy(desc, 1); - iop_desc_set_byte_count(desc, chan, 0); - iop_desc_set_dest_addr(desc, chan, 0); - iop_desc_set_memcpy_src_addr(desc, 0); -} - -#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr - -static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, - u32 next_desc_addr) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - BUG_ON(hw_desc->next_desc); - hw_desc->next_desc = next_desc_addr; -} - -static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - return hw_desc->next_desc; -} - -static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->next_desc = 0; -} - -static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc, - u32 val) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - hw_desc->block_fill_data = val; -} - -static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) -{ - struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field; - - BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result)); - - if (desc_ctrl.pq_xfer_en) - return byte_count.zero_result_err_q; - else - return byte_count.zero_result_err; -} - -static inline void iop_chan_append(struct iop_adma_chan *chan) -{ - u32 adma_accr; - - adma_accr = __raw_readl(ADMA_ACCR(chan)); - adma_accr |= 0x2; - __raw_writel(adma_accr, ADMA_ACCR(chan)); -} - -static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) -{ - return __raw_readl(ADMA_ACSR(chan)); -} - -static inline void iop_chan_disable(struct iop_adma_chan *chan) -{ - u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan)); - adma_chan_ctrl &= ~0x1; - __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan)); -} - -static inline void iop_chan_enable(struct iop_adma_chan *chan) -{ - u32 adma_chan_ctrl; - - adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan)); - adma_chan_ctrl |= 0x1; - __raw_writel(adma_chan_ctrl, ADMA_ACCR(chan)); -} - -static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 12); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 11); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan) -{ - u32 status = __raw_readl(ADMA_ACSR(chan)); - status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3); - __raw_writel(status, ADMA_ACSR(chan)); -} - -static inline int -iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(9, &status); -} - -static inline int -iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(5, &status); -} - -static inline int -iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(4, &status); -} - -static inline int -iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return test_bit(3, &status); -} - -static inline int -iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -static inline int -iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan) -{ - return 0; -} - -#endif /* _ADMA_H */ diff --git a/include/asm-arm/arch-iop13xx/debug-macro.S b/include/asm-arm/arch-iop13xx/debug-macro.S deleted file mode 100644 index 788b4e386c16..000000000000 --- a/include/asm-arm/arch-iop13xx/debug-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop13xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - orreq \rx, \rx, #0x00d80000 - movne \rx, #0xfe000000 @ virtual - orrne \rx, \rx, #0x00e80000 - orr \rx, \rx, #0x00002300 - orr \rx, \rx, #0x00000040 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-iop13xx/dma.h b/include/asm-arm/arch-iop13xx/dma.h deleted file mode 100644 index d79846fbb394..000000000000 --- a/include/asm-arm/arch-iop13xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -#ifndef _IOP13XX_DMA_H -#define _IOP13XX_DMA_H -#endif diff --git a/include/asm-arm/arch-iop13xx/entry-macro.S b/include/asm-arm/arch-iop13xx/entry-macro.S deleted file mode 100644 index a624a7870c64..000000000000 --- a/include/asm-arm/arch-iop13xx/entry-macro.S +++ /dev/null @@ -1,45 +0,0 @@ -/* - * iop13xx low level irq macros - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - .endm - - /* - * Note: a 1-cycle window exists where iintvec will return the value - * of iintbase, so we explicitly check for "bad zeros" - */ - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqnr, c3, c2, 0 @ Read IINTVEC - cmp \irqnr, #0 - mrceq p6, 0, \irqnr, c3, c2, 0 @ Re-read on potentially bad zero - adds \irqstat, \irqnr, #1 @ Check for 0xffffffff - movne \irqnr, \irqnr, lsr #2 @ Convert to irqnr - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop13xx/hardware.h b/include/asm-arm/arch-iop13xx/hardware.h deleted file mode 100644 index 8e1d56289846..000000000000 --- a/include/asm-arm/arch-iop13xx/hardware.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H -#include - -#define pcibios_assign_all_busses() 1 - -#ifndef __ASSEMBLY__ -extern unsigned long iop13xx_pcibios_min_io; -extern unsigned long iop13xx_pcibios_min_mem; -extern u16 iop13xx_dev_id(void); -extern void iop13xx_set_atu_mmr_bases(void); -#endif - -#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem) - -/* - * Generic chipset bits - * - */ -#include "iop13xx.h" - -/* - * Board specific bits - */ -#include "iq81340.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-iop13xx/io.h b/include/asm-arm/arch-iop13xx/io.h deleted file mode 100644 index a6e0f9e6ddcf..000000000000 --- a/include/asm-arm/arch-iop13xx/io.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * iop13xx custom ioremap implementation - * Copyright (c) 2005-2006, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) __iop13xx_io(a) -#define __mem_pci(a) (a) -#define __mem_isa(a) (a) - -extern void __iomem * __iop13xx_io(unsigned long io_addr); -extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop13xx_iounmap(void __iomem *addr); - -extern u32 iop13xx_atue_mem_base; -extern u32 iop13xx_atux_mem_base; -extern size_t iop13xx_atue_mem_size; -extern size_t iop13xx_atux_mem_size; - -#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop13xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop13xx/iop13xx.h b/include/asm-arm/arch-iop13xx/iop13xx.h deleted file mode 100644 index 52b7fab7ef60..000000000000 --- a/include/asm-arm/arch-iop13xx/iop13xx.h +++ /dev/null @@ -1,526 +0,0 @@ -#ifndef _IOP13XX_HW_H_ -#define _IOP13XX_HW_H_ - -#ifndef __ASSEMBLY__ -/* The ATU offsets can change based on the strapping */ -extern u32 iop13xx_atux_pmmr_offset; -extern u32 iop13xx_atue_pmmr_offset; -void iop13xx_init_irq(void); -void iop13xx_map_io(void); -void iop13xx_platform_init(void); -void iop13xx_add_tpmi_devices(void); -void iop13xx_init_irq(void); - -/* CPUID CP6 R0 Page 0 */ -static inline int iop13xx_cpu_id(void) -{ - int id; - asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id)); - return id; -} - -/* WDTCR CP6 R7 Page 9 */ -static inline u32 read_wdtcr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtcr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val)); -} - -/* WDTSR CP6 R8 Page 9 */ -static inline u32 read_wdtsr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val)); - return val; -} -static inline void write_wdtsr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val)); -} - -/* RCSR - Reset Cause Status Register */ -static inline u32 read_rcsr(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val)); - return val; -} - -extern unsigned long get_iop_tick_rate(void); -#endif - -/* - * IOP13XX I/O and Mem space regions for PCI autoconfiguration - */ -#define IOP13XX_MAX_RAM_SIZE 0x80000000UL /* 2GB */ -#define IOP13XX_PCI_OFFSET IOP13XX_MAX_RAM_SIZE - -/* PCI MAP - * bus range cpu phys cpu virt note - * 0x0000.0000 + 2GB (n/a) (n/a) inbound, 1:1 mapping with Physical RAM - * 0x8000.0000 + 928M 0x1.8000.0000 (ioremap) PCIX outbound memory window - * 0x8000.0000 + 928M 0x2.8000.0000 (ioremap) PCIE outbound memory window - * - * IO MAP - * 0x1000 + 64K 0x0.fffb.1000 0xfec6.1000 PCIX outbound i/o window - * 0x1000 + 64K 0x0.fffd.1000 0xfed7.1000 PCIE outbound i/o window - */ -#define IOP13XX_PCIX_IO_WINDOW_SIZE 0x10000UL -#define IOP13XX_PCIX_LOWER_IO_PA 0xfffb0000UL -#define IOP13XX_PCIX_LOWER_IO_VA 0xfec60000UL -#define IOP13XX_PCIX_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIX_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIX_UPPER_IO_PA (IOP13XX_PCIX_LOWER_IO_PA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_IO_VA (IOP13XX_PCIX_LOWER_IO_VA +\ - IOP13XX_PCIX_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIX_LOWER_IO_PA\ - - IOP13XX_PCIX_LOWER_IO_VA)) - -#define IOP13XX_PCIX_MEM_PHYS_OFFSET 0x100000000ULL -#define IOP13XX_PCIX_MEM_WINDOW_SIZE 0x3a000000UL -#define IOP13XX_PCIX_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET) -#define IOP13XX_PCIX_LOWER_MEM_PA (IOP13XX_PCIX_MEM_PHYS_OFFSET +\ - IOP13XX_PCIX_LOWER_MEM_BA) -#define IOP13XX_PCIX_UPPER_MEM_PA (IOP13XX_PCIX_LOWER_MEM_PA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_UPPER_MEM_BA (IOP13XX_PCIX_LOWER_MEM_BA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) - -#define IOP13XX_PCIX_MEM_COOKIE 0x80000000UL -#define IOP13XX_PCIX_LOWER_MEM_RA IOP13XX_PCIX_MEM_COOKIE -#define IOP13XX_PCIX_UPPER_MEM_RA (IOP13XX_PCIX_LOWER_MEM_RA +\ - IOP13XX_PCIX_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIX_MEM_OFFSET (IOP13XX_PCIX_MEM_COOKIE -\ - IOP13XX_PCIX_LOWER_MEM_BA) - -/* PCI-E ranges */ -#define IOP13XX_PCIE_IO_WINDOW_SIZE 0x10000UL -#define IOP13XX_PCIE_LOWER_IO_PA 0xfffd0000UL -#define IOP13XX_PCIE_LOWER_IO_VA 0xfed70000UL -#define IOP13XX_PCIE_LOWER_IO_BA 0x0UL /* OIOTVR */ -#define IOP13XX_PCIE_IO_BUS_OFFSET 0x1000UL -#define IOP13XX_PCIE_UPPER_IO_PA (IOP13XX_PCIE_LOWER_IO_PA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_VA (IOP13XX_PCIE_LOWER_IO_VA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_IO_BA (IOP13XX_PCIE_LOWER_IO_BA +\ - IOP13XX_PCIE_IO_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PCIE_LOWER_IO_PA\ - - IOP13XX_PCIE_LOWER_IO_VA)) - -#define IOP13XX_PCIE_MEM_PHYS_OFFSET 0x200000000ULL -#define IOP13XX_PCIE_MEM_WINDOW_SIZE 0x3a000000UL -#define IOP13XX_PCIE_LOWER_MEM_BA (PHYS_OFFSET + IOP13XX_PCI_OFFSET) -#define IOP13XX_PCIE_LOWER_MEM_PA (IOP13XX_PCIE_MEM_PHYS_OFFSET +\ - IOP13XX_PCIE_LOWER_MEM_BA) -#define IOP13XX_PCIE_UPPER_MEM_PA (IOP13XX_PCIE_LOWER_MEM_PA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_UPPER_MEM_BA (IOP13XX_PCIE_LOWER_MEM_BA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) - -/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */ -#define IOP13XX_PCIE_MEM_COOKIE 0xc0000000UL -#define IOP13XX_PCIE_LOWER_MEM_RA IOP13XX_PCIE_MEM_COOKIE -#define IOP13XX_PCIE_UPPER_MEM_RA (IOP13XX_PCIE_LOWER_MEM_RA +\ - IOP13XX_PCIE_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PCIE_MEM_OFFSET (IOP13XX_PCIE_MEM_COOKIE -\ - IOP13XX_PCIE_LOWER_MEM_BA) - -/* PBI Ranges */ -#define IOP13XX_PBI_LOWER_MEM_PA 0xf0000000UL -#define IOP13XX_PBI_MEM_WINDOW_SIZE 0x04000000UL -#define IOP13XX_PBI_MEM_COOKIE 0xfa000000UL -#define IOP13XX_PBI_LOWER_MEM_RA IOP13XX_PBI_MEM_COOKIE -#define IOP13XX_PBI_UPPER_MEM_RA (IOP13XX_PBI_LOWER_MEM_RA +\ - IOP13XX_PBI_MEM_WINDOW_SIZE - 1) - -/* - * IOP13XX chipset registers - */ -#define IOP13XX_PMMR_PHYS_MEM_BASE 0xffd80000UL /* PMMR phys. address */ -#define IOP13XX_PMMR_VIRT_MEM_BASE 0xfee80000UL /* PMMR phys. address */ -#define IOP13XX_PMMR_MEM_WINDOW_SIZE 0x80000 -#define IOP13XX_PMMR_UPPER_MEM_VA (IOP13XX_PMMR_VIRT_MEM_BASE +\ - IOP13XX_PMMR_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PMMR_UPPER_MEM_PA (IOP13XX_PMMR_PHYS_MEM_BASE +\ - IOP13XX_PMMR_MEM_WINDOW_SIZE - 1) -#define IOP13XX_PMMR_VIRT_TO_PHYS(addr) (u32) ((u32) addr +\ - (IOP13XX_PMMR_PHYS_MEM_BASE\ - - IOP13XX_PMMR_VIRT_MEM_BASE)) -#define IOP13XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\ - (IOP13XX_PMMR_PHYS_MEM_BASE\ - - IOP13XX_PMMR_VIRT_MEM_BASE)) -#define IOP13XX_REG_ADDR32(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR16(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR8(reg) (IOP13XX_PMMR_VIRT_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR32_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR16_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_REG_ADDR8_PHYS(reg) (IOP13XX_PMMR_PHYS_MEM_BASE + (reg)) -#define IOP13XX_PMMR_SIZE 0x00080000 - -/*=================== Defines for Platform Devices =====================*/ -#define IOP13XX_UART0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300) -#define IOP13XX_UART1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340) -#define IOP13XX_UART0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300) -#define IOP13XX_UART1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340) - -#define IOP13XX_I2C0_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500) -#define IOP13XX_I2C1_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520) -#define IOP13XX_I2C2_PHYS (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540) -#define IOP13XX_I2C0_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500) -#define IOP13XX_I2C1_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520) -#define IOP13XX_I2C2_VIRT (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540) - -/* ATU selection flags */ -/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */ -#define IOP13XX_INIT_ATU_DEFAULT (0) -#define IOP13XX_INIT_ATU_ATUX (1 << 0) -#define IOP13XX_INIT_ATU_ATUE (1 << 1) -#define IOP13XX_INIT_ATU_NONE (1 << 2) - -/* UART selection flags */ -/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */ -#define IOP13XX_INIT_UART_DEFAULT (0) -#define IOP13XX_INIT_UART_0 (1 << 0) -#define IOP13XX_INIT_UART_1 (1 << 1) - -/* I2C selection flags */ -/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */ -#define IOP13XX_INIT_I2C_DEFAULT (0) -#define IOP13XX_INIT_I2C_0 (1 << 0) -#define IOP13XX_INIT_I2C_1 (1 << 1) -#define IOP13XX_INIT_I2C_2 (1 << 2) - -/* ADMA selection flags */ -/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */ -#define IOP13XX_INIT_ADMA_DEFAULT (0) -#define IOP13XX_INIT_ADMA_0 (1 << 0) -#define IOP13XX_INIT_ADMA_1 (1 << 1) -#define IOP13XX_INIT_ADMA_2 (1 << 2) - -/* Platform devices */ -#define IQ81340_NUM_UART 2 -#define IQ81340_NUM_I2C 3 -#define IQ81340_NUM_PHYS_MAP_FLASH 1 -#define IQ81340_NUM_ADMA 3 -#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \ - IQ81340_NUM_I2C + \ - IQ81340_NUM_PHYS_MAP_FLASH + \ - IQ81340_NUM_ADMA) - -/*========================== PMMR offsets for key registers ============*/ -#define IOP13XX_ATU0_PMMR_OFFSET 0x00048000 -#define IOP13XX_ATU1_PMMR_OFFSET 0x0004c000 -#define IOP13XX_ATU2_PMMR_OFFSET 0x0004d000 -#define IOP13XX_ADMA0_PMMR_OFFSET 0x00000000 -#define IOP13XX_ADMA1_PMMR_OFFSET 0x00000200 -#define IOP13XX_ADMA2_PMMR_OFFSET 0x00000400 -#define IOP13XX_PBI_PMMR_OFFSET 0x00001580 -#define IOP13XX_MU_PMMR_OFFSET 0x00004000 -#define IOP13XX_ESSR0_PMMR_OFFSET 0x00002188 -#define IOP13XX_ESSR0 IOP13XX_REG_ADDR32(0x00002188) - -#define IOP13XX_ESSR0_IFACE_MASK 0x00004000 /* Interface PCI-X / PCI-E */ -#define IOP13XX_CONTROLLER_ONLY (1 << 14) -#define IOP13XX_INTERFACE_SEL_PCIX (1 << 15) - -#define IOP13XX_PMON_PMMR_OFFSET 0x0001A000 -#define IOP13XX_PMON_BASE (IOP13XX_PMMR_VIRT_MEM_BASE +\ - IOP13XX_PMON_PMMR_OFFSET) -#define IOP13XX_PMON_PHYSBASE (IOP13XX_PMMR_PHYS_MEM_BASE +\ - IOP13XX_PMON_PMMR_OFFSET) - -#define IOP13XX_PMON_CMD0 (IOP13XX_PMON_BASE + 0x0) -#define IOP13XX_PMON_EVR0 (IOP13XX_PMON_BASE + 0x4) -#define IOP13XX_PMON_STS0 (IOP13XX_PMON_BASE + 0x8) -#define IOP13XX_PMON_DATA0 (IOP13XX_PMON_BASE + 0xC) - -#define IOP13XX_PMON_CMD3 (IOP13XX_PMON_BASE + 0x30) -#define IOP13XX_PMON_EVR3 (IOP13XX_PMON_BASE + 0x34) -#define IOP13XX_PMON_STS3 (IOP13XX_PMON_BASE + 0x38) -#define IOP13XX_PMON_DATA3 (IOP13XX_PMON_BASE + 0x3C) - -#define IOP13XX_PMON_CMD7 (IOP13XX_PMON_BASE + 0x70) -#define IOP13XX_PMON_EVR7 (IOP13XX_PMON_BASE + 0x74) -#define IOP13XX_PMON_STS7 (IOP13XX_PMON_BASE + 0x78) -#define IOP13XX_PMON_DATA7 (IOP13XX_PMON_BASE + 0x7C) - -#define IOP13XX_PMONEN (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040) -#define IOP13XX_PMONSTAT (IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044) - -/*================================ATU===================================*/ -#define IOP13XX_ATUX_OFFSET(ofs) IOP13XX_REG_ADDR32(\ - iop13xx_atux_pmmr_offset + (ofs)) - -#define IOP13XX_ATUX_DID IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x2) - -#define IOP13XX_ATUX_ATUCMD IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x4) -#define IOP13XX_ATUX_ATUSR IOP13XX_REG_ADDR16(\ - iop13xx_atux_pmmr_offset + 0x6) - -#define IOP13XX_ATUX_IABAR0 IOP13XX_ATUX_OFFSET(0x10) -#define IOP13XX_ATUX_IAUBAR0 IOP13XX_ATUX_OFFSET(0x14) -#define IOP13XX_ATUX_IABAR1 IOP13XX_ATUX_OFFSET(0x18) -#define IOP13XX_ATUX_IAUBAR1 IOP13XX_ATUX_OFFSET(0x1c) -#define IOP13XX_ATUX_IABAR2 IOP13XX_ATUX_OFFSET(0x20) -#define IOP13XX_ATUX_IAUBAR2 IOP13XX_ATUX_OFFSET(0x24) -#define IOP13XX_ATUX_IALR0 IOP13XX_ATUX_OFFSET(0x40) -#define IOP13XX_ATUX_IATVR0 IOP13XX_ATUX_OFFSET(0x44) -#define IOP13XX_ATUX_IAUTVR0 IOP13XX_ATUX_OFFSET(0x48) -#define IOP13XX_ATUX_IALR1 IOP13XX_ATUX_OFFSET(0x4c) -#define IOP13XX_ATUX_IATVR1 IOP13XX_ATUX_OFFSET(0x50) -#define IOP13XX_ATUX_IAUTVR1 IOP13XX_ATUX_OFFSET(0x54) -#define IOP13XX_ATUX_IALR2 IOP13XX_ATUX_OFFSET(0x58) -#define IOP13XX_ATUX_IATVR2 IOP13XX_ATUX_OFFSET(0x5c) -#define IOP13XX_ATUX_IAUTVR2 IOP13XX_ATUX_OFFSET(0x60) -#define IOP13XX_ATUX_ATUCR IOP13XX_ATUX_OFFSET(0x70) -#define IOP13XX_ATUX_PCSR IOP13XX_ATUX_OFFSET(0x74) -#define IOP13XX_ATUX_ATUISR IOP13XX_ATUX_OFFSET(0x78) -#define IOP13XX_ATUX_PCIXSR IOP13XX_ATUX_OFFSET(0xD4) -#define IOP13XX_ATUX_IABAR3 IOP13XX_ATUX_OFFSET(0x200) -#define IOP13XX_ATUX_IAUBAR3 IOP13XX_ATUX_OFFSET(0x204) -#define IOP13XX_ATUX_IALR3 IOP13XX_ATUX_OFFSET(0x208) -#define IOP13XX_ATUX_IATVR3 IOP13XX_ATUX_OFFSET(0x20c) -#define IOP13XX_ATUX_IAUTVR3 IOP13XX_ATUX_OFFSET(0x210) - -#define IOP13XX_ATUX_OIOBAR IOP13XX_ATUX_OFFSET(0x300) -#define IOP13XX_ATUX_OIOWTVR IOP13XX_ATUX_OFFSET(0x304) -#define IOP13XX_ATUX_OUMBAR0 IOP13XX_ATUX_OFFSET(0x308) -#define IOP13XX_ATUX_OUMWTVR0 IOP13XX_ATUX_OFFSET(0x30c) -#define IOP13XX_ATUX_OUMBAR1 IOP13XX_ATUX_OFFSET(0x310) -#define IOP13XX_ATUX_OUMWTVR1 IOP13XX_ATUX_OFFSET(0x314) -#define IOP13XX_ATUX_OUMBAR2 IOP13XX_ATUX_OFFSET(0x318) -#define IOP13XX_ATUX_OUMWTVR2 IOP13XX_ATUX_OFFSET(0x31c) -#define IOP13XX_ATUX_OUMBAR3 IOP13XX_ATUX_OFFSET(0x320) -#define IOP13XX_ATUX_OUMWTVR3 IOP13XX_ATUX_OFFSET(0x324) -#define IOP13XX_ATUX_OUDMABAR IOP13XX_ATUX_OFFSET(0x328) -#define IOP13XX_ATUX_OUMSIBAR IOP13XX_ATUX_OFFSET(0x32c) -#define IOP13XX_ATUX_OCCAR IOP13XX_ATUX_OFFSET(0x330) -#define IOP13XX_ATUX_OCCDR IOP13XX_ATUX_OFFSET(0x334) - -#define IOP13XX_ATUX_ATUCR_OUT_EN (1 << 1) -#define IOP13XX_ATUX_PCSR_CENTRAL_RES (1 << 25) -#define IOP13XX_ATUX_PCSR_P_RSTOUT (1 << 21) -#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP13XX_ATUX_PCSR_IN_Q_BUSY (1 << 14) -#define IOP13XX_ATUX_PCSR_FREQ_OFFSET (16) - -#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR (1 << 18) -#define IOP13XX_ATUX_STAT_VPD_ADDR (1 << 17) -#define IOP13XX_ATUX_STAT_INT_PAR_ERR (1 << 16) -#define IOP13XX_ATUX_STAT_CFG_WRITE (1 << 15) -#define IOP13XX_ATUX_STAT_ERR_COR (1 << 14) -#define IOP13XX_ATUX_STAT_TX_SCEM (1 << 13) -#define IOP13XX_ATUX_STAT_REC_SCEM (1 << 12) -#define IOP13XX_ATUX_STAT_POWER_TRAN (1 << 11) -#define IOP13XX_ATUX_STAT_TX_SERR (1 << 10) -#define IOP13XX_ATUX_STAT_DET_PAR_ERR (1 << 9 ) -#define IOP13XX_ATUX_STAT_BIST (1 << 8 ) -#define IOP13XX_ATUX_STAT_INT_REC_MABORT (1 << 7 ) -#define IOP13XX_ATUX_STAT_REC_SERR (1 << 4 ) -#define IOP13XX_ATUX_STAT_EXT_REC_MABORT (1 << 3 ) -#define IOP13XX_ATUX_STAT_EXT_REC_TABORT (1 << 2 ) -#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT (1 << 1 ) -#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR (1 << 0 ) - -#define IOP13XX_ATUX_PCIXSR_BUS_NUM (8) -#define IOP13XX_ATUX_PCIXSR_DEV_NUM (3) -#define IOP13XX_ATUX_PCIXSR_FUNC_NUM (0) - -#define IOP13XX_ATUX_IALR_DISABLE 0x00000001 -#define IOP13XX_ATUX_OUMBAR_ENABLE 0x80000000 - -#define IOP13XX_ATUE_OFFSET(ofs) IOP13XX_REG_ADDR32(\ - iop13xx_atue_pmmr_offset + (ofs)) - -#define IOP13XX_ATUE_DID IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x2) -#define IOP13XX_ATUE_ATUCMD IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x4) -#define IOP13XX_ATUE_ATUSR IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0x6) - -#define IOP13XX_ATUE_IABAR0 IOP13XX_ATUE_OFFSET(0x10) -#define IOP13XX_ATUE_IAUBAR0 IOP13XX_ATUE_OFFSET(0x14) -#define IOP13XX_ATUE_IABAR1 IOP13XX_ATUE_OFFSET(0x18) -#define IOP13XX_ATUE_IAUBAR1 IOP13XX_ATUE_OFFSET(0x1c) -#define IOP13XX_ATUE_IABAR2 IOP13XX_ATUE_OFFSET(0x20) -#define IOP13XX_ATUE_IAUBAR2 IOP13XX_ATUE_OFFSET(0x24) -#define IOP13XX_ATUE_IALR0 IOP13XX_ATUE_OFFSET(0x40) -#define IOP13XX_ATUE_IATVR0 IOP13XX_ATUE_OFFSET(0x44) -#define IOP13XX_ATUE_IAUTVR0 IOP13XX_ATUE_OFFSET(0x48) -#define IOP13XX_ATUE_IALR1 IOP13XX_ATUE_OFFSET(0x4c) -#define IOP13XX_ATUE_IATVR1 IOP13XX_ATUE_OFFSET(0x50) -#define IOP13XX_ATUE_IAUTVR1 IOP13XX_ATUE_OFFSET(0x54) -#define IOP13XX_ATUE_IALR2 IOP13XX_ATUE_OFFSET(0x58) -#define IOP13XX_ATUE_IATVR2 IOP13XX_ATUE_OFFSET(0x5c) -#define IOP13XX_ATUE_IAUTVR2 IOP13XX_ATUE_OFFSET(0x60) -#define IOP13XX_ATUE_PE_LSTS IOP13XX_REG_ADDR16(\ - iop13xx_atue_pmmr_offset + 0xe2) -#define IOP13XX_ATUE_OIOWTVR IOP13XX_ATUE_OFFSET(0x304) -#define IOP13XX_ATUE_OUMBAR0 IOP13XX_ATUE_OFFSET(0x308) -#define IOP13XX_ATUE_OUMWTVR0 IOP13XX_ATUE_OFFSET(0x30c) -#define IOP13XX_ATUE_OUMBAR1 IOP13XX_ATUE_OFFSET(0x310) -#define IOP13XX_ATUE_OUMWTVR1 IOP13XX_ATUE_OFFSET(0x314) -#define IOP13XX_ATUE_OUMBAR2 IOP13XX_ATUE_OFFSET(0x318) -#define IOP13XX_ATUE_OUMWTVR2 IOP13XX_ATUE_OFFSET(0x31c) -#define IOP13XX_ATUE_OUMBAR3 IOP13XX_ATUE_OFFSET(0x320) -#define IOP13XX_ATUE_OUMWTVR3 IOP13XX_ATUE_OFFSET(0x324) - -#define IOP13XX_ATUE_ATUCR IOP13XX_ATUE_OFFSET(0x70) -#define IOP13XX_ATUE_PCSR IOP13XX_ATUE_OFFSET(0x74) -#define IOP13XX_ATUE_ATUISR IOP13XX_ATUE_OFFSET(0x78) -#define IOP13XX_ATUE_OIOBAR IOP13XX_ATUE_OFFSET(0x300) -#define IOP13XX_ATUE_OCCAR IOP13XX_ATUE_OFFSET(0x32c) -#define IOP13XX_ATUE_OCCDR IOP13XX_ATUE_OFFSET(0x330) - -#define IOP13XX_ATUE_PIE_STS IOP13XX_ATUE_OFFSET(0x384) -#define IOP13XX_ATUE_PIE_MSK IOP13XX_ATUE_OFFSET(0x388) - -#define IOP13XX_ATUE_ATUCR_IVM (1 << 6) -#define IOP13XX_ATUE_ATUCR_OUT_EN (1 << 1) -#define IOP13XX_ATUE_OCCAR_BUS_NUM (24) -#define IOP13XX_ATUE_OCCAR_DEV_NUM (19) -#define IOP13XX_ATUE_OCCAR_FUNC_NUM (16) -#define IOP13XX_ATUE_OCCAR_EXT_REG (8) -#define IOP13XX_ATUE_OCCAR_REG (2) - -#define IOP13XX_ATUE_PCSR_BUS_NUM (24) -#define IOP13XX_ATUE_PCSR_DEV_NUM (19) -#define IOP13XX_ATUE_PCSR_FUNC_NUM (16) -#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY (1 << 15) -#define IOP13XX_ATUE_PCSR_IN_Q_BUSY (1 << 14) -#define IOP13XX_ATUE_PCSR_END_POINT (1 << 13) -#define IOP13XX_ATUE_PCSR_LLRB_BUSY (1 << 12) - -#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK (0xff) -#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK (0x1f) -#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK (0x7) - -#define IOP13XX_ATUE_PCSR_CORE_RESET (8) -#define IOP13XX_ATUE_PCSR_FUNC_NUM (16) - -#define IOP13XX_ATUE_LSTS_TRAINING (1 << 11) -#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG (1 << 28) -#define IOP13XX_ATUE_STAT_PME (1 << 27) -#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG (1 << 26) -#define IOP13XX_ATUE_STAT_IVM (1 << 25) -#define IOP13XX_ATUE_STAT_BIST (1 << 24) -#define IOP13XX_ATUE_STAT_CFG_WRITE (1 << 18) -#define IOP13XX_ATUE_STAT_VPD_ADDR (1 << 17) -#define IOP13XX_ATUE_STAT_POWER_TRAN (1 << 16) -#define IOP13XX_ATUE_STAT_HALT_ON_ERROR (1 << 13) -#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR (1 << 12) -#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG (1 << 11) -#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR (1 << 10) -#define IOP13XX_ATUE_STAT_ERR_COR (1 << 9 ) -#define IOP13XX_ATUE_STAT_ERR_UNCOR (1 << 8 ) -#define IOP13XX_ATUE_STAT_CRS (1 << 7 ) -#define IOP13XX_ATUE_STAT_LNK_DWN (1 << 6 ) -#define IOP13XX_ATUE_STAT_INT_REC_MABORT (1 << 5 ) -#define IOP13XX_ATUE_STAT_DET_PAR_ERR (1 << 4 ) -#define IOP13XX_ATUE_STAT_EXT_REC_MABORT (1 << 3 ) -#define IOP13XX_ATUE_STAT_SIG_TABORT (1 << 2 ) -#define IOP13XX_ATUE_STAT_EXT_REC_TABORT (1 << 1 ) -#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR (1 << 0 ) - -#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ (1 << 31) -#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT (1 << 30) -#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP (1 << 29) -#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR (1 << 28) -#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ (1 << 20) -#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR (1 << 19) -#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP (1 << 18) -#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW (1 << 17) -#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP (1 << 16) -#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT (1 << 15) -#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT (1 << 14) -#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR (1 << 13) -#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP (1 << 12) -#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR (1 << 4 ) -#define IOP13XX_ATUE_ESTAT_TRAINING_ERR (1 << 0 ) - -#define IOP13XX_ATUE_IALR_DISABLE (0x00000001) -#define IOP13XX_ATUE_OUMBAR_ENABLE (0x80000000) -#define IOP13XX_ATU_OUMBAR_FUNC_NUM (28) -#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK (0x7) -/*=======================================================================*/ - -/*============================MESSAGING UNIT=============================*/ -#define IOP13XX_MU_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\ - (ofs)) - -#define IOP13XX_MU_IMR0 IOP13XX_MU_OFFSET(0x10) -#define IOP13XX_MU_IMR1 IOP13XX_MU_OFFSET(0x14) -#define IOP13XX_MU_OMR0 IOP13XX_MU_OFFSET(0x18) -#define IOP13XX_MU_OMR1 IOP13XX_MU_OFFSET(0x1C) -#define IOP13XX_MU_IDR IOP13XX_MU_OFFSET(0x20) -#define IOP13XX_MU_IISR IOP13XX_MU_OFFSET(0x24) -#define IOP13XX_MU_IIMR IOP13XX_MU_OFFSET(0x28) -#define IOP13XX_MU_ODR IOP13XX_MU_OFFSET(0x2C) -#define IOP13XX_MU_OISR IOP13XX_MU_OFFSET(0x30) -#define IOP13XX_MU_OIMR IOP13XX_MU_OFFSET(0x34) -#define IOP13XX_MU_IRCSR IOP13XX_MU_OFFSET(0x38) -#define IOP13XX_MU_ORCSR IOP13XX_MU_OFFSET(0x3C) -#define IOP13XX_MU_MIMR IOP13XX_MU_OFFSET(0x48) -#define IOP13XX_MU_MUCR IOP13XX_MU_OFFSET(0x50) -#define IOP13XX_MU_QBAR IOP13XX_MU_OFFSET(0x54) -#define IOP13XX_MU_MUBAR IOP13XX_MU_OFFSET(0x84) - -#define IOP13XX_MU_WINDOW_SIZE (8 * 1024) -#define IOP13XX_MU_BASE_PHYS (0xff000000) -#define IOP13XX_MU_BASE_PCI (0xff000000) -#define IOP13XX_MU_MIMR_PCI (IOP13XX_MU_BASE_PCI + 0x48) -#define IOP13XX_MU_MIMR_CORE_SELECT (15) -/*=======================================================================*/ - -/*==============================ADMA UNITS===============================*/ -#define IOP13XX_ADMA_PHYS_BASE(chan) IOP13XX_REG_ADDR32_PHYS((chan << 9)) -#define IOP13XX_ADMA_UPPER_PA(chan) (IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0) - -/*==============================XSI BRIDGE===============================*/ -#define IOP13XX_XBG_BECSR IOP13XX_REG_ADDR32(0x178c) -#define IOP13XX_XBG_BERAR IOP13XX_REG_ADDR32(0x1790) -#define IOP13XX_XBG_BERUAR IOP13XX_REG_ADDR32(0x1794) -#define is_atue_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \ - IOP13XX_PMMR_VIRT_TO_PHYS(\ - IOP13XX_ATUE_OCCDR))\ - && (__raw_readl(IOP13XX_XBG_BECSR) & 1)) -#define is_atux_occdr_error(x) ((__raw_readl(IOP13XX_XBG_BERAR) == \ - IOP13XX_PMMR_VIRT_TO_PHYS(\ - IOP13XX_ATUX_OCCDR))\ - && (__raw_readl(IOP13XX_XBG_BECSR) & 1)) -/*=======================================================================*/ - -#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\ - (ofs)) - -#define IOP13XX_PBI_CR IOP13XX_PBI_OFFSET(0x0) -#define IOP13XX_PBI_SR IOP13XX_PBI_OFFSET(0x4) -#define IOP13XX_PBI_BAR0 IOP13XX_PBI_OFFSET(0x8) -#define IOP13XX_PBI_LR0 IOP13XX_PBI_OFFSET(0xc) -#define IOP13XX_PBI_BAR1 IOP13XX_PBI_OFFSET(0x10) -#define IOP13XX_PBI_LR1 IOP13XX_PBI_OFFSET(0x14) - -#define IOP13XX_PROCESSOR_FREQ IOP13XX_REG_ADDR32(0x2180) - -/* Watchdog timer definitions */ -#define IOP_WDTCR_EN_ARM 0x1e1e1e1e -#define IOP_WDTCR_EN 0xe1e1e1e1 -#define IOP_WDTCR_DIS_ARM 0x1f1f1f1f -#define IOP_WDTCR_DIS 0xf1f1f1f1 -#define IOP_RCSR_WDT (1 << 5) /* reset caused by watchdog timer */ -#define IOP13XX_WDTSR_WRITE_EN (1 << 31) /* used to speed up reset requests */ -#define IOP13XX_WDTCR_IB_RESET (1 << 0) - -#endif /* _IOP13XX_HW_H_ */ diff --git a/include/asm-arm/arch-iop13xx/iq81340.h b/include/asm-arm/arch-iop13xx/iq81340.h deleted file mode 100644 index ba2cf931e9ce..000000000000 --- a/include/asm-arm/arch-iop13xx/iq81340.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _IQ81340_H_ -#define _IQ81340_H_ - -#define IQ81340_PCE_BAR0 IOP13XX_PBI_LOWER_MEM_RA -#define IQ81340_PCE_BAR1 (IQ81340_PCE_BAR0 + 0x02000000) - -#define IQ81340_FLASHBASE IQ81340_PCE_BAR0 /* Flash */ - -#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a)) - -#define IQ81340_PRD_CODE IQ81340_PCE_BAR1_OFFSET(0) -#define IQ81340_BRD_STEP IQ81340_PCE_BAR1_OFFSET(0x10000) -#define IQ81340_CPLD_REV IQ81340_PCE_BAR1_OFFSET(0x20000) -#define IQ81340_LED IQ81340_PCE_BAR1_OFFSET(0x30000) -#define IQ81340_LHEX IQ81340_PCE_BAR1_OFFSET(0x40000) -#define IQ81340_RHEX IQ81340_PCE_BAR1_OFFSET(0x50000) -#define IQ81340_BUZZER IQ81340_PCE_BAR1_OFFSET(0x60000) -#define IQ81340_32K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x70000) -#define IQ81340_256K_NVRAM IQ81340_PCE_BAR1_OFFSET(0x80000) -#define IQ81340_ROTARY_SW IQ81340_PCE_BAR1_OFFSET(0xd0000) -#define IQ81340_BATT_STAT IQ81340_PCE_BAR1_OFFSET(0xf0000) -#define IQ81340_CMP_FLSH IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */ - -#define PBI_CF_IDE_BASE (IQ81340_CMP_FLSH) -#define PBI_CF_BAR_ADDR (IOP13XX_PBI_BAR1) - - -#endif /* _IQ81340_H_ */ diff --git a/include/asm-arm/arch-iop13xx/irqs.h b/include/asm-arm/arch-iop13xx/irqs.h deleted file mode 100644 index 054e7acb5bfa..000000000000 --- a/include/asm-arm/arch-iop13xx/irqs.h +++ /dev/null @@ -1,196 +0,0 @@ -#ifndef _IOP13XX_IRQS_H_ -#define _IOP13XX_IRQS_H_ - -#ifndef __ASSEMBLER__ -#include - -/* INTPND0 CP6 R0 Page 3 - */ -static inline u32 read_intpnd_0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val)); - return val; -} - -/* INTPND1 CP6 R1 Page 3 - */ -static inline u32 read_intpnd_1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val)); - return val; -} - -/* INTPND2 CP6 R2 Page 3 - */ -static inline u32 read_intpnd_2(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val)); - return val; -} - -/* INTPND3 CP6 R3 Page 3 - */ -static inline u32 read_intpnd_3(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val)); - return val; -} -#endif - -#define INTBASE 0 -#define INTSIZE_4 1 - -/* - * iop34x chipset interrupts - */ -#define IOP13XX_IRQ(x) (IOP13XX_IRQ_OFS + (x)) - -/* - * On IRQ or FIQ register - */ -#define IRQ_IOP13XX_ADMA0_EOT (0) -#define IRQ_IOP13XX_ADMA0_EOC (1) -#define IRQ_IOP13XX_ADMA1_EOT (2) -#define IRQ_IOP13XX_ADMA1_EOC (3) -#define IRQ_IOP13XX_ADMA2_EOT (4) -#define IRQ_IOP13XX_ADMA2_EOC (5) -#define IRQ_IOP134_WATCHDOG (6) -#define IRQ_IOP13XX_RSVD_7 (7) -#define IRQ_IOP13XX_TIMER0 (8) -#define IRQ_IOP13XX_TIMER1 (9) -#define IRQ_IOP13XX_I2C_0 (10) -#define IRQ_IOP13XX_I2C_1 (11) -#define IRQ_IOP13XX_MSG (12) -#define IRQ_IOP13XX_MSGIBQ (13) -#define IRQ_IOP13XX_ATU_IM (14) -#define IRQ_IOP13XX_ATU_BIST (15) -#define IRQ_IOP13XX_PPMU (16) -#define IRQ_IOP13XX_COREPMU (17) -#define IRQ_IOP13XX_CORECACHE (18) -#define IRQ_IOP13XX_RSVD_19 (19) -#define IRQ_IOP13XX_RSVD_20 (20) -#define IRQ_IOP13XX_RSVD_21 (21) -#define IRQ_IOP13XX_RSVD_22 (22) -#define IRQ_IOP13XX_RSVD_23 (23) -#define IRQ_IOP13XX_XINT0 (24) -#define IRQ_IOP13XX_XINT1 (25) -#define IRQ_IOP13XX_XINT2 (26) -#define IRQ_IOP13XX_XINT3 (27) -#define IRQ_IOP13XX_XINT4 (28) -#define IRQ_IOP13XX_XINT5 (29) -#define IRQ_IOP13XX_XINT6 (30) -#define IRQ_IOP13XX_XINT7 (31) - /* IINTSRC1 bit */ -#define IRQ_IOP13XX_XINT8 (32) /* 0 */ -#define IRQ_IOP13XX_XINT9 (33) /* 1 */ -#define IRQ_IOP13XX_XINT10 (34) /* 2 */ -#define IRQ_IOP13XX_XINT11 (35) /* 3 */ -#define IRQ_IOP13XX_XINT12 (36) /* 4 */ -#define IRQ_IOP13XX_XINT13 (37) /* 5 */ -#define IRQ_IOP13XX_XINT14 (38) /* 6 */ -#define IRQ_IOP13XX_XINT15 (39) /* 7 */ -#define IRQ_IOP13XX_RSVD_40 (40) /* 8 */ -#define IRQ_IOP13XX_RSVD_41 (41) /* 9 */ -#define IRQ_IOP13XX_RSVD_42 (42) /* 10 */ -#define IRQ_IOP13XX_RSVD_43 (43) /* 11 */ -#define IRQ_IOP13XX_RSVD_44 (44) /* 12 */ -#define IRQ_IOP13XX_RSVD_45 (45) /* 13 */ -#define IRQ_IOP13XX_RSVD_46 (46) /* 14 */ -#define IRQ_IOP13XX_RSVD_47 (47) /* 15 */ -#define IRQ_IOP13XX_RSVD_48 (48) /* 16 */ -#define IRQ_IOP13XX_RSVD_49 (49) /* 17 */ -#define IRQ_IOP13XX_RSVD_50 (50) /* 18 */ -#define IRQ_IOP13XX_UART0 (51) /* 19 */ -#define IRQ_IOP13XX_UART1 (52) /* 20 */ -#define IRQ_IOP13XX_PBIE (53) /* 21 */ -#define IRQ_IOP13XX_ATU_CRW (54) /* 22 */ -#define IRQ_IOP13XX_ATU_ERR (55) /* 23 */ -#define IRQ_IOP13XX_MCU_ERR (56) /* 24 */ -#define IRQ_IOP13XX_ADMA0_ERR (57) /* 25 */ -#define IRQ_IOP13XX_ADMA1_ERR (58) /* 26 */ -#define IRQ_IOP13XX_ADMA2_ERR (59) /* 27 */ -#define IRQ_IOP13XX_RSVD_60 (60) /* 28 */ -#define IRQ_IOP13XX_RSVD_61 (61) /* 29 */ -#define IRQ_IOP13XX_MSG_ERR (62) /* 30 */ -#define IRQ_IOP13XX_RSVD_63 (63) /* 31 */ - /* IINTSRC2 bit */ -#define IRQ_IOP13XX_INTERPROC (64) /* 0 */ -#define IRQ_IOP13XX_RSVD_65 (65) /* 1 */ -#define IRQ_IOP13XX_RSVD_66 (66) /* 2 */ -#define IRQ_IOP13XX_RSVD_67 (67) /* 3 */ -#define IRQ_IOP13XX_RSVD_68 (68) /* 4 */ -#define IRQ_IOP13XX_RSVD_69 (69) /* 5 */ -#define IRQ_IOP13XX_RSVD_70 (70) /* 6 */ -#define IRQ_IOP13XX_RSVD_71 (71) /* 7 */ -#define IRQ_IOP13XX_RSVD_72 (72) /* 8 */ -#define IRQ_IOP13XX_RSVD_73 (73) /* 9 */ -#define IRQ_IOP13XX_RSVD_74 (74) /* 10 */ -#define IRQ_IOP13XX_RSVD_75 (75) /* 11 */ -#define IRQ_IOP13XX_RSVD_76 (76) /* 12 */ -#define IRQ_IOP13XX_RSVD_77 (77) /* 13 */ -#define IRQ_IOP13XX_RSVD_78 (78) /* 14 */ -#define IRQ_IOP13XX_RSVD_79 (79) /* 15 */ -#define IRQ_IOP13XX_RSVD_80 (80) /* 16 */ -#define IRQ_IOP13XX_RSVD_81 (81) /* 17 */ -#define IRQ_IOP13XX_RSVD_82 (82) /* 18 */ -#define IRQ_IOP13XX_RSVD_83 (83) /* 19 */ -#define IRQ_IOP13XX_RSVD_84 (84) /* 20 */ -#define IRQ_IOP13XX_RSVD_85 (85) /* 21 */ -#define IRQ_IOP13XX_RSVD_86 (86) /* 22 */ -#define IRQ_IOP13XX_RSVD_87 (87) /* 23 */ -#define IRQ_IOP13XX_RSVD_88 (88) /* 24 */ -#define IRQ_IOP13XX_RSVD_89 (89) /* 25 */ -#define IRQ_IOP13XX_RSVD_90 (90) /* 26 */ -#define IRQ_IOP13XX_RSVD_91 (91) /* 27 */ -#define IRQ_IOP13XX_RSVD_92 (92) /* 28 */ -#define IRQ_IOP13XX_RSVD_93 (93) /* 29 */ -#define IRQ_IOP13XX_SIB_ERR (94) /* 30 */ -#define IRQ_IOP13XX_SRAM_ERR (95) /* 31 */ - /* IINTSRC3 bit */ -#define IRQ_IOP13XX_I2C_2 (96) /* 0 */ -#define IRQ_IOP13XX_ATUE_BIST (97) /* 1 */ -#define IRQ_IOP13XX_ATUE_CRW (98) /* 2 */ -#define IRQ_IOP13XX_ATUE_ERR (99) /* 3 */ -#define IRQ_IOP13XX_IMU (100) /* 4 */ -#define IRQ_IOP13XX_RSVD_101 (101) /* 5 */ -#define IRQ_IOP13XX_RSVD_102 (102) /* 6 */ -#define IRQ_IOP13XX_TPMI0_OUT (103) /* 7 */ -#define IRQ_IOP13XX_TPMI1_OUT (104) /* 8 */ -#define IRQ_IOP13XX_TPMI2_OUT (105) /* 9 */ -#define IRQ_IOP13XX_TPMI3_OUT (106) /* 10 */ -#define IRQ_IOP13XX_ATUE_IMA (107) /* 11 */ -#define IRQ_IOP13XX_ATUE_IMB (108) /* 12 */ -#define IRQ_IOP13XX_ATUE_IMC (109) /* 13 */ -#define IRQ_IOP13XX_ATUE_IMD (110) /* 14 */ -#define IRQ_IOP13XX_MU_MSI_TB (111) /* 15 */ -#define IRQ_IOP13XX_RSVD_112 (112) /* 16 */ -#define IRQ_IOP13XX_INBD_MSI (113) /* 17 */ -#define IRQ_IOP13XX_RSVD_114 (114) /* 18 */ -#define IRQ_IOP13XX_RSVD_115 (115) /* 19 */ -#define IRQ_IOP13XX_RSVD_116 (116) /* 20 */ -#define IRQ_IOP13XX_RSVD_117 (117) /* 21 */ -#define IRQ_IOP13XX_RSVD_118 (118) /* 22 */ -#define IRQ_IOP13XX_RSVD_119 (119) /* 23 */ -#define IRQ_IOP13XX_RSVD_120 (120) /* 24 */ -#define IRQ_IOP13XX_RSVD_121 (121) /* 25 */ -#define IRQ_IOP13XX_RSVD_122 (122) /* 26 */ -#define IRQ_IOP13XX_RSVD_123 (123) /* 27 */ -#define IRQ_IOP13XX_RSVD_124 (124) /* 28 */ -#define IRQ_IOP13XX_RSVD_125 (125) /* 29 */ -#define IRQ_IOP13XX_RSVD_126 (126) /* 30 */ -#define IRQ_IOP13XX_HPI (127) /* 31 */ - -#ifdef CONFIG_PCI_MSI -#define IRQ_IOP13XX_MSI_0 (IRQ_IOP13XX_HPI + 1) -#define NR_IOP13XX_IRQS (IRQ_IOP13XX_MSI_0 + 128) -#else -#define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1) -#endif - -#define NR_IRQS NR_IOP13XX_IRQS - -#endif /* _IOP13XX_IRQ_H_ */ diff --git a/include/asm-arm/arch-iop13xx/memory.h b/include/asm-arm/arch-iop13xx/memory.h deleted file mode 100644 index 031a0fa78eff..000000000000 --- a/include/asm-arm/arch-iop13xx/memory.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) -#define TASK_SIZE UL(0x3f000000) -#define PAGE_OFFSET UL(0x40000000) -#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3) - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_ARCH_IOP13XX) -#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE) -#define IOP13XX_PMMR_V_END (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE) -#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE) -#define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -/* RAM has 1:1 mapping on the PCIe/x Busses */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - -#define virt_to_lbus(x) \ -(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) && \ -((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? \ -((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \ -((x) - PAGE_OFFSET + PHYS_OFFSET)) - -#define lbus_to_virt(x) \ -(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \ -((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \ -((x) - PHYS_OFFSET + PAGE_OFFSET)) - -/* Device is an lbus device if it is on the platform bus of the IOP13XX */ -#define is_lbus_device(dev) (dev &&\ - (strncmp(dev->bus->name, "platform", 8) == 0)) - -#define __arch_page_to_dma(dev, page) \ -({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \ -(dma_addr_t)__virt_to_bus(page_address(page));}) - -#define __arch_dma_to_virt(dev, addr) \ -({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);}) - -#define __arch_virt_to_dma(dev, addr) \ -({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);}) - -#endif /* CONFIG_ARCH_IOP13XX */ -#endif /* !ASSEMBLY */ - -#define PFN_TO_NID(addr) (0) - -#endif diff --git a/include/asm-arm/arch-iop13xx/msi.h b/include/asm-arm/arch-iop13xx/msi.h deleted file mode 100644 index b80c5ae17e99..000000000000 --- a/include/asm-arm/arch-iop13xx/msi.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _IOP13XX_MSI_H_ -#define _IOP13XX_MSI_H_ -#ifdef CONFIG_PCI_MSI -void iop13xx_msi_init(void); -#else -static inline void iop13xx_msi_init(void) -{ - return; -} -#endif -#endif diff --git a/include/asm-arm/arch-iop13xx/pci.h b/include/asm-arm/arch-iop13xx/pci.h deleted file mode 100644 index 4041f30d4cd3..000000000000 --- a/include/asm-arm/arch-iop13xx/pci.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _IOP13XX_PCI_H_ -#define _IOP13XX_PCI_H_ -#include -#include - -struct pci_sys_data; -struct hw_pci; -int iop13xx_pci_setup(int nr, struct pci_sys_data *sys); -struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *); -void iop13xx_atu_select(struct hw_pci *plat_pci); -void iop13xx_pci_init(void); -void iop13xx_map_pci_memory(void); - -#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY | \ - PCI_STATUS_SIG_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_TARGET_ABORT | \ - PCI_STATUS_REC_MASTER_ABORT | \ - PCI_STATUS_SIG_SYSTEM_ERROR | \ - PCI_STATUS_DETECTED_PARITY) - -#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR | \ - IOP13XX_ATUE_STAT_ROOT_SYS_ERR | \ - IOP13XX_ATUE_STAT_PCI_IFACE_ERR | \ - IOP13XX_ATUE_STAT_ERR_COR | \ - IOP13XX_ATUE_STAT_ERR_UNCOR | \ - IOP13XX_ATUE_STAT_CRS | \ - IOP13XX_ATUE_STAT_DET_PAR_ERR | \ - IOP13XX_ATUE_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUE_STAT_SIG_TABORT | \ - IOP13XX_ATUE_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUE_STAT_MASTER_DATA_PAR) - -#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM | \ - IOP13XX_ATUX_STAT_REC_SCEM | \ - IOP13XX_ATUX_STAT_TX_SERR | \ - IOP13XX_ATUX_STAT_DET_PAR_ERR | \ - IOP13XX_ATUX_STAT_INT_REC_MABORT | \ - IOP13XX_ATUX_STAT_REC_SERR | \ - IOP13XX_ATUX_STAT_EXT_REC_MABORT | \ - IOP13XX_ATUX_STAT_EXT_REC_TABORT | \ - IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \ - IOP13XX_ATUX_STAT_MASTER_DATA_PAR) - -/* PCI interrupts - */ -#define ATUX_INTA IRQ_IOP13XX_XINT0 -#define ATUX_INTB IRQ_IOP13XX_XINT1 -#define ATUX_INTC IRQ_IOP13XX_XINT2 -#define ATUX_INTD IRQ_IOP13XX_XINT3 - -#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA -#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB -#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC -#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD - -#endif /* _IOP13XX_PCI_H_ */ diff --git a/include/asm-arm/arch-iop13xx/system.h b/include/asm-arm/arch-iop13xx/system.h deleted file mode 100644 index 8575af8db78c..000000000000 --- a/include/asm-arm/arch-iop13xx/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-iop13xx/system.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Reset the internal bus (warning both cores are reset) - */ - write_wdtcr(IOP_WDTCR_EN_ARM); - write_wdtcr(IOP_WDTCR_EN); - write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET); - write_wdtcr(0x1000); - - for(;;); -} diff --git a/include/asm-arm/arch-iop13xx/time.h b/include/asm-arm/arch-iop13xx/time.h deleted file mode 100644 index 49213d9d7cad..000000000000 --- a/include/asm-arm/arch-iop13xx/time.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef _IOP13XX_TIME_H_ -#define _IOP13XX_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0 - -#define IOP_TMR_EN 0x02 -#define IOP_TMR_RELOAD 0x04 -#define IOP_TMR_PRIVILEGED 0x08 -#define IOP_TMR_RATIO_1_1 0x00 - -#define IOP13XX_XSI_FREQ_RATIO_MASK (3 << 19) -#define IOP13XX_XSI_FREQ_RATIO_2 (0 << 19) -#define IOP13XX_XSI_FREQ_RATIO_3 (1 << 19) -#define IOP13XX_XSI_FREQ_RATIO_4 (2 << 19) -#define IOP13XX_CORE_FREQ_MASK (7 << 16) -#define IOP13XX_CORE_FREQ_600 (0 << 16) -#define IOP13XX_CORE_FREQ_667 (1 << 16) -#define IOP13XX_CORE_FREQ_800 (2 << 16) -#define IOP13XX_CORE_FREQ_933 (3 << 16) -#define IOP13XX_CORE_FREQ_1000 (4 << 16) -#define IOP13XX_CORE_FREQ_1200 (5 << 16) - -void iop_init_time(unsigned long tickrate); -unsigned long iop_gettimeoffset(void); - -static inline unsigned long iop13xx_core_freq(void) -{ - unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ); - freq &= IOP13XX_CORE_FREQ_MASK; - switch (freq) { - case IOP13XX_CORE_FREQ_600: - return 600000000; - case IOP13XX_CORE_FREQ_667: - return 667000000; - case IOP13XX_CORE_FREQ_800: - return 800000000; - case IOP13XX_CORE_FREQ_933: - return 933000000; - case IOP13XX_CORE_FREQ_1000: - return 1000000000; - case IOP13XX_CORE_FREQ_1200: - return 1200000000; - default: - printk("%s: warning unknown frequency, defaulting to 800Mhz\n", - __FUNCTION__); - } - - return 800000000; -} - -static inline unsigned long iop13xx_xsi_bus_ratio(void) -{ - unsigned long ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ); - ratio &= IOP13XX_XSI_FREQ_RATIO_MASK; - switch (ratio) { - case IOP13XX_XSI_FREQ_RATIO_2: - return 2; - case IOP13XX_XSI_FREQ_RATIO_3: - return 3; - case IOP13XX_XSI_FREQ_RATIO_4: - return 4; - default: - printk("%s: warning unknown ratio, defaulting to 2\n", - __FUNCTION__); - } - - return 2; -} - -static inline void write_tmr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val)); -} - -static inline void write_tmr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val)); -} - -static inline u32 read_tcr0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val)); - return val; -} - -static inline u32 read_tcr1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val)); - return val; -} - -static inline void write_trr0(u32 val) -{ - asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val)); -} - -static inline void write_trr1(u32 val) -{ - asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val)); -} - -static inline void write_tisr(u32 val) -{ - asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val)); -} -#endif diff --git a/include/asm-arm/arch-iop13xx/timex.h b/include/asm-arm/arch-iop13xx/timex.h deleted file mode 100644 index 47564ecb3872..000000000000 --- a/include/asm-arm/arch-iop13xx/timex.h +++ /dev/null @@ -1,3 +0,0 @@ -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop13xx/uncompress.h b/include/asm-arm/arch-iop13xx/uncompress.h deleted file mode 100644 index 5d4418decb86..000000000000 --- a/include/asm-arm/arch-iop13xx/uncompress.h +++ /dev/null @@ -1,23 +0,0 @@ -#include -#include -#include - -#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS) -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop13xx/vmalloc.h b/include/asm-arm/arch-iop13xx/vmalloc.h deleted file mode 100644 index c53456740345..000000000000 --- a/include/asm-arm/arch-iop13xx/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _VMALLOC_H_ -#define _VMALLOC_H_ -#define VMALLOC_END 0xfa000000UL -#endif diff --git a/include/asm-arm/arch-iop32x/adma.h b/include/asm-arm/arch-iop32x/adma.h deleted file mode 100644 index 5ed92037dd10..000000000000 --- a/include/asm-arm/arch-iop32x/adma.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef IOP32X_ADMA_H -#define IOP32X_ADMA_H -#include -#endif - diff --git a/include/asm-arm/arch-iop32x/debug-macro.S b/include/asm-arm/arch-iop32x/debug-macro.S deleted file mode 100644 index 9022b6849e23..000000000000 --- a/include/asm-arm/arch-iop32x/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mov \rx, #0xfe000000 @ physical as well as virtual - orr \rx, \rx, #0x00800000 @ location of the UART - .endm - -#define UART_SHIFT 0 -#include diff --git a/include/asm-arm/arch-iop32x/dma.h b/include/asm-arm/arch-iop32x/dma.h deleted file mode 100644 index e977a9ef3160..000000000000 --- a/include/asm-arm/arch-iop32x/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/dma.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-iop32x/entry-macro.S b/include/asm-arm/arch-iop32x/entry-macro.S deleted file mode 100644 index 207db99dfbd2..000000000000 --- a/include/asm-arm/arch-iop32x/entry-macro.S +++ /dev/null @@ -1,36 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/entry-macro.S - * - * Low-level IRQ helper macros for IOP32x-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - mrc p15, 0, \tmp, c15, c1, 0 - mov \tmp, \tmp - sub pc, pc, #4 @ cp_wait - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqstat, c8, c0, 0 @ Read IINTSRC - cmp \irqstat, #0 - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop32x/glantank.h b/include/asm-arm/arch-iop32x/glantank.h deleted file mode 100644 index bf0665acc1c1..000000000000 --- a/include/asm-arm/arch-iop32x/glantank.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/glantank.h - * - * IO-Data GLAN Tank board registers - */ - -#ifndef __GLANTANK_H -#define __GLANTANK_H - -#define GLANTANK_UART 0xfe800000 /* UART */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/gpio.h b/include/asm-arm/arch-iop32x/gpio.h deleted file mode 100644 index 708f4ec9db1d..000000000000 --- a/include/asm-arm/arch-iop32x/gpio.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_IOP32X_GPIO_H -#define __ASM_ARCH_IOP32X_GPIO_H - -#include - -#endif diff --git a/include/asm-arm/arch-iop32x/hardware.h b/include/asm-arm/arch-iop32x/hardware.h deleted file mode 100644 index 6556ed5eee31..000000000000 --- a/include/asm-arm/arch-iop32x/hardware.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/hardware.h - */ - -#ifndef __HARDWARE_H -#define __HARDWARE_H - -#include - -/* - * Note about PCI IO space mappings - * - * To make IO space accesses efficient, we store virtual addresses in - * the IO resources. - * - * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/plat-iop/pci.c. - */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#ifndef __ASSEMBLY__ -void iop32x_init_irq(void); -#endif - - -/* - * Generic chipset bits - */ -#include "iop32x.h" - -/* - * Board specific bits - */ -#include "glantank.h" -#include "iq80321.h" -#include "iq31244.h" -#include "n2100.h" - - -#endif diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h deleted file mode 100644 index 47b2736236e4..000000000000 --- a/include/asm-arm/arch-iop32x/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include - -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) - -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop32x/iop32x.h b/include/asm-arm/arch-iop32x/iop32x.h deleted file mode 100644 index 0d8af57221a1..000000000000 --- a/include/asm-arm/arch-iop32x/iop32x.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iop32x.h - * - * Intel IOP32X Chip definitions - * - * Author: Rory Bolt - * Copyright (C) 2002 Rory Bolt - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP32X_H -#define __IOP32X_H - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg)) - -#include - -/* ATU Parameters - * set up a 1:1 bus to physical ram relationship - * w/ physical ram on top of pci in the memory map - */ -#define IOP32X_MAX_RAM_SIZE 0x40000000UL -#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE -#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000 -#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE - -#endif diff --git a/include/asm-arm/arch-iop32x/iq31244.h b/include/asm-arm/arch-iop32x/iq31244.h deleted file mode 100644 index fff4eafa1f6b..000000000000 --- a/include/asm-arm/arch-iop32x/iq31244.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iq31244.h - * - * Intel IQ31244 evaluation board registers - */ - -#ifndef __IQ31244_H -#define __IQ31244_H - -#define IQ31244_UART 0xfe800000 /* UART #1 */ -#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/iq80321.h b/include/asm-arm/arch-iop32x/iq80321.h deleted file mode 100644 index eb69db9b9a06..000000000000 --- a/include/asm-arm/arch-iop32x/iq80321.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/iq80321.h - * - * Intel IQ80321 evaluation board registers - */ - -#ifndef __IQ80321_H -#define __IQ80321_H - -#define IQ80321_UART 0xfe800000 /* UART #1 */ -#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */ -#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */ -#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */ -#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop32x/irqs.h b/include/asm-arm/arch-iop32x/irqs.h deleted file mode 100644 index bbaef873afce..000000000000 --- a/include/asm-arm/arch-iop32x/irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/irqs.h - * - * Author: Rory Bolt - * Copyright: (C) 2002 Rory Bolt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IRQS_H -#define __IRQS_H - -/* - * IOP80321 chipset interrupts - */ -#define IRQ_IOP32X_DMA0_EOT 0 -#define IRQ_IOP32X_DMA0_EOC 1 -#define IRQ_IOP32X_DMA1_EOT 2 -#define IRQ_IOP32X_DMA1_EOC 3 -#define IRQ_IOP32X_AA_EOT 6 -#define IRQ_IOP32X_AA_EOC 7 -#define IRQ_IOP32X_CORE_PMON 8 -#define IRQ_IOP32X_TIMER0 9 -#define IRQ_IOP32X_TIMER1 10 -#define IRQ_IOP32X_I2C_0 11 -#define IRQ_IOP32X_I2C_1 12 -#define IRQ_IOP32X_MESSAGING 13 -#define IRQ_IOP32X_ATU_BIST 14 -#define IRQ_IOP32X_PERFMON 15 -#define IRQ_IOP32X_CORE_PMU 16 -#define IRQ_IOP32X_BIU_ERR 17 -#define IRQ_IOP32X_ATU_ERR 18 -#define IRQ_IOP32X_MCU_ERR 19 -#define IRQ_IOP32X_DMA0_ERR 20 -#define IRQ_IOP32X_DMA1_ERR 21 -#define IRQ_IOP32X_AA_ERR 23 -#define IRQ_IOP32X_MSG_ERR 24 -#define IRQ_IOP32X_SSP 25 -#define IRQ_IOP32X_XINT0 27 -#define IRQ_IOP32X_XINT1 28 -#define IRQ_IOP32X_XINT2 29 -#define IRQ_IOP32X_XINT3 30 -#define IRQ_IOP32X_HPI 31 - -#define NR_IRQS 32 - - -#endif diff --git a/include/asm-arm/arch-iop32x/memory.h b/include/asm-arm/arch-iop32x/memory.h deleted file mode 100644 index bdcf03895ee0..000000000000 --- a/include/asm-arm/arch-iop32x/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xa0000000) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - -#endif diff --git a/include/asm-arm/arch-iop32x/n2100.h b/include/asm-arm/arch-iop32x/n2100.h deleted file mode 100644 index 77a8af476629..000000000000 --- a/include/asm-arm/arch-iop32x/n2100.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/n2100.h - * - * Thecus N2100 board registers - */ - -#ifndef __N2100_H -#define __N2100_H - -#define N2100_UART 0xfe800000 /* UART */ - -#define N2100_COPY_BUTTON IOP3XX_GPIO_LINE(0) -#define N2100_PCA9532_RESET IOP3XX_GPIO_LINE(2) -#define N2100_RESET_BUTTON IOP3XX_GPIO_LINE(3) -#define N2100_HARDWARE_RESET IOP3XX_GPIO_LINE(4) -#define N2100_POWER_BUTTON IOP3XX_GPIO_LINE(5) - - -#endif diff --git a/include/asm-arm/arch-iop32x/system.h b/include/asm-arm/arch-iop32x/system.h deleted file mode 100644 index 17b7eb7e9c0d..000000000000 --- a/include/asm-arm/arch-iop32x/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - local_irq_disable(); - - if (machine_is_n2100()) { - gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW); - gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT); - while (1) - ; - } - - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-iop32x/time.h b/include/asm-arm/arch-iop32x/time.h deleted file mode 100644 index 0f28c9949623..000000000000 --- a/include/asm-arm/arch-iop32x/time.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _IOP32X_TIME_H_ -#define _IOP32X_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0 -#endif diff --git a/include/asm-arm/arch-iop32x/timex.h b/include/asm-arm/arch-iop32x/timex.h deleted file mode 100644 index 445704619825..000000000000 --- a/include/asm-arm/arch-iop32x/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/timex.h - * - * IOP32x architecture timex specifications - */ - -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop32x/uncompress.h b/include/asm-arm/arch-iop32x/uncompress.h deleted file mode 100644 index 07028786394e..000000000000 --- a/include/asm-arm/arch-iop32x/uncompress.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/uncompress.h - */ - -#include -#include -#include -#include - -static volatile u8 *uart_base; - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - uart_base[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80321()) - uart_base = (volatile u8 *)IQ80321_UART; - else if (machine_is_iq31244() || machine_is_em7210()) - uart_base = (volatile u8 *)IQ31244_UART; - else - uart_base = (volatile u8 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop32x/vmalloc.h b/include/asm-arm/arch-iop32x/vmalloc.h deleted file mode 100644 index 0a70baa19517..000000000000 --- a/include/asm-arm/arch-iop32x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-iop32x/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-iop33x/adma.h b/include/asm-arm/arch-iop33x/adma.h deleted file mode 100644 index 4b92f795f90e..000000000000 --- a/include/asm-arm/arch-iop33x/adma.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef IOP33X_ADMA_H -#define IOP33X_ADMA_H -#include -#endif - diff --git a/include/asm-arm/arch-iop33x/debug-macro.S b/include/asm-arm/arch-iop33x/debug-macro.S deleted file mode 100644 index 9e7132ebe6a7..000000000000 --- a/include/asm-arm/arch-iop33x/debug-macro.S +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - movne \rx, #0xfe000000 @ virtual - orr \rx, \rx, #0x00ff0000 - orr \rx, \rx, #0x0000f700 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-iop33x/dma.h b/include/asm-arm/arch-iop33x/dma.h deleted file mode 100644 index b7775fdc5ad3..000000000000 --- a/include/asm-arm/arch-iop33x/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/dma.h - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-iop33x/entry-macro.S b/include/asm-arm/arch-iop33x/entry-macro.S deleted file mode 100644 index b8e3d449e882..000000000000 --- a/include/asm-arm/arch-iop33x/entry-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/entry-macro.S - * - * Low-level IRQ helper macros for IOP33x-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mrc p15, 0, \tmp, c15, c1, 0 - orr \tmp, \tmp, #(1 << 6) - mcr p15, 0, \tmp, c15, c1, 0 @ Enable cp6 access - mrc p15, 0, \tmp, c15, c1, 0 - mov \tmp, \tmp - sub pc, pc, #4 @ cp_wait - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p6, 0, \irqstat, c14, c0, 0 @ Read IINTVEC - cmp \irqstat, #0 - mrceq p6, 0, \irqstat, c14, c0, 0 @ erratum 63 workaround - adds \irqnr, \irqstat, #1 - movne \irqnr, \irqstat, lsr #2 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - mrc p15, 0, \tmp1, c15, c1, 0 - ands \tmp2, \tmp1, #(1 << 6) - bicne \tmp1, \tmp1, #(1 << 6) - mcrne p15, 0, \tmp1, c15, c1, 0 @ Disable cp6 access - .endm diff --git a/include/asm-arm/arch-iop33x/gpio.h b/include/asm-arm/arch-iop33x/gpio.h deleted file mode 100644 index ddd55bba9bb9..000000000000 --- a/include/asm-arm/arch-iop33x/gpio.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_IOP33X_GPIO_H -#define __ASM_ARCH_IOP33X_GPIO_H - -#include - -#endif diff --git a/include/asm-arm/arch-iop33x/hardware.h b/include/asm-arm/arch-iop33x/hardware.h deleted file mode 100644 index 0659cf94d040..000000000000 --- a/include/asm-arm/arch-iop33x/hardware.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/hardware.h - */ - -#ifndef __HARDWARE_H -#define __HARDWARE_H - -#include - -/* - * Note about PCI IO space mappings - * - * To make IO space accesses efficient, we store virtual addresses in - * the IO resources. - * - * The PCI IO space is located at virtual 0xfe000000 from physical - * 0x90000000. The PCI BARs must be programmed with physical addresses, - * but when we read them, we convert them to virtual addresses. See - * arch/arm/mach-iop3xx/iop3xx-pci.c - */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#ifndef __ASSEMBLY__ -void iop33x_init_irq(void); - -extern struct platform_device iop33x_uart0_device; -extern struct platform_device iop33x_uart1_device; -#endif - - -/* - * Generic chipset bits - * - */ -#include "iop33x.h" - -/* - * Board specific bits - */ -#include "iq80331.h" -#include "iq80332.h" - - -#endif diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h deleted file mode 100644 index 3fc607c46f03..000000000000 --- a/include/asm-arm/arch-iop33x/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/io.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IO_H -#define __IO_H - -#include - -extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size, - unsigned int mtype); -extern void __iop3xx_iounmap(void __iomem *addr); - -#define IO_SPACE_LIMIT 0xffffffff -#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p)) -#define __mem_pci(a) (a) - -#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f) -#define __arch_iounmap(a) __iop3xx_iounmap(a) - -#endif diff --git a/include/asm-arm/arch-iop33x/iop33x.h b/include/asm-arm/arch-iop33x/iop33x.h deleted file mode 100644 index 766985b9a723..000000000000 --- a/include/asm-arm/arch-iop33x/iop33x.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iop33x.h - * - * Intel IOP33X Chip definitions - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright (C) 2003, 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IOP33X_H -#define __IOP33X_H - -/* - * Peripherals that are shared between the iop32x and iop33x but - * located at different addresses. - */ -#define IOP3XX_GPIO_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg)) -#define IOP3XX_TIMER_REG(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg)) - -#include - -/* UARTs */ -#define IOP33X_UART0_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700) -#define IOP33X_UART0_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700) -#define IOP33X_UART1_PHYS (IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740) -#define IOP33X_UART1_VIRT (IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740) - -/* ATU Parameters - * set up a 1:1 bus to physical ram relationship - * w/ pci on top of physical ram in memory map - */ -#define IOP33X_MAX_RAM_SIZE 0x80000000UL -#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE -#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE) -#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE - - -#endif diff --git a/include/asm-arm/arch-iop33x/iq80331.h b/include/asm-arm/arch-iop33x/iq80331.h deleted file mode 100644 index 79b9302017ea..000000000000 --- a/include/asm-arm/arch-iop33x/iq80331.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iq80331.h - * - * Intel IQ80331 evaluation board registers - */ - -#ifndef __IQ80331_H -#define __IQ80331_H - -#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop33x/iq80332.h b/include/asm-arm/arch-iop33x/iq80332.h deleted file mode 100644 index 053165629492..000000000000 --- a/include/asm-arm/arch-iop33x/iq80332.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/iq80332.h - * - * Intel IQ80332 evaluation board registers - */ - -#ifndef __IQ80332_H -#define __IQ80332_H - -#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */ -#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */ -#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */ -#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */ - - -#endif diff --git a/include/asm-arm/arch-iop33x/irqs.h b/include/asm-arm/arch-iop33x/irqs.h deleted file mode 100644 index d045f8403396..000000000000 --- a/include/asm-arm/arch-iop33x/irqs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/irqs.h - * - * Author: Dave Jiang (dave.jiang@intel.com) - * Copyright: (C) 2003 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __IRQS_H -#define __IRQS_H - -/* - * IOP80331 chipset interrupts - */ -#define IRQ_IOP33X_DMA0_EOT 0 -#define IRQ_IOP33X_DMA0_EOC 1 -#define IRQ_IOP33X_DMA1_EOT 2 -#define IRQ_IOP33X_DMA1_EOC 3 -#define IRQ_IOP33X_AA_EOT 6 -#define IRQ_IOP33X_AA_EOC 7 -#define IRQ_IOP33X_TIMER0 8 -#define IRQ_IOP33X_TIMER1 9 -#define IRQ_IOP33X_I2C_0 10 -#define IRQ_IOP33X_I2C_1 11 -#define IRQ_IOP33X_MSG 12 -#define IRQ_IOP33X_MSGIBQ 13 -#define IRQ_IOP33X_ATU_BIST 14 -#define IRQ_IOP33X_PERFMON 15 -#define IRQ_IOP33X_CORE_PMU 16 -#define IRQ_IOP33X_XINT0 24 -#define IRQ_IOP33X_XINT1 25 -#define IRQ_IOP33X_XINT2 26 -#define IRQ_IOP33X_XINT3 27 -#define IRQ_IOP33X_XINT8 32 -#define IRQ_IOP33X_XINT9 33 -#define IRQ_IOP33X_XINT10 34 -#define IRQ_IOP33X_XINT11 35 -#define IRQ_IOP33X_XINT12 36 -#define IRQ_IOP33X_XINT13 37 -#define IRQ_IOP33X_XINT14 38 -#define IRQ_IOP33X_XINT15 39 -#define IRQ_IOP33X_UART0 51 -#define IRQ_IOP33X_UART1 52 -#define IRQ_IOP33X_PBIE 53 -#define IRQ_IOP33X_ATU_CRW 54 -#define IRQ_IOP33X_ATU_ERR 55 -#define IRQ_IOP33X_MCU_ERR 56 -#define IRQ_IOP33X_DMA0_ERR 57 -#define IRQ_IOP33X_DMA1_ERR 58 -#define IRQ_IOP33X_AA_ERR 60 -#define IRQ_IOP33X_MSG_ERR 62 -#define IRQ_IOP33X_HPI 63 - -#define NR_IRQS 64 - - -#endif diff --git a/include/asm-arm/arch-iop33x/memory.h b/include/asm-arm/arch-iop33x/memory.h deleted file mode 100644 index d798d83c83a5..000000000000 --- a/include/asm-arm/arch-iop33x/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/memory.h - */ - -#ifndef __MEMORY_H -#define __MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - -#endif diff --git a/include/asm-arm/arch-iop33x/system.h b/include/asm-arm/arch-iop33x/system.h deleted file mode 100644 index 00dd07ece262..000000000000 --- a/include/asm-arm/arch-iop33x/system.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/system.h - * - * Copyright (C) 2001 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - *IOP3XX_PCSR = 0x30; - - /* Jump into ROM at address 0 */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-iop33x/time.h b/include/asm-arm/arch-iop33x/time.h deleted file mode 100644 index 4ac4d7664f85..000000000000 --- a/include/asm-arm/arch-iop33x/time.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _IOP33X_TIME_H_ -#define _IOP33X_TIME_H_ -#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0 -#endif diff --git a/include/asm-arm/arch-iop33x/timex.h b/include/asm-arm/arch-iop33x/timex.h deleted file mode 100644 index 75a001e93daf..000000000000 --- a/include/asm-arm/arch-iop33x/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/timex.h - * - * IOP3xx architecture timex specifications - */ - -#include - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-iop33x/uncompress.h b/include/asm-arm/arch-iop33x/uncompress.h deleted file mode 100644 index 34d9e8e8287a..000000000000 --- a/include/asm-arm/arch-iop33x/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/uncompress.h - */ - -#include -#include -#include -#include - -static volatile u32 *uart_base; - -#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void putc(char c) -{ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - uart_base[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - if (machine_is_iq80331() || machine_is_iq80332()) - uart_base = (volatile u32 *)IOP33X_UART0_PHYS; - else - uart_base = (volatile u32 *)0xfe800000; -} - -/* - * nothing to do - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-iop33x/vmalloc.h b/include/asm-arm/arch-iop33x/vmalloc.h deleted file mode 100644 index 66f545a7f4fc..000000000000 --- a/include/asm-arm/arch-iop33x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-iop33x/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S deleted file mode 100644 index bc8b39654793..000000000000 --- a/include/asm-arm/arch-ixp2000/debug-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-ixp2000/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc0000000 @ Physical base - movne \rx, #0xfe000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - orr \rx, \rx, #0x00030000 -#ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp2000/dma.h b/include/asm-arm/arch-ixp2000/dma.h deleted file mode 100644 index 548d8dc507eb..000000000000 --- a/include/asm-arm/arch-ixp2000/dma.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/dma.h - * - * Copyright (C) 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h deleted file mode 100644 index 42f3c28dc5c4..000000000000 --- a/include/asm-arm/arch-ixp2000/enp2611.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/enp2611.h - * - * Register and other defines for Radisys ENP-2611 - * - * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The - * original version carries the following notices: - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ENP2611_H -#define __ENP2611_H - -#define ENP2611_CALEB_PHYS_BASE 0xc5000000 -#define ENP2611_CALEB_VIRT_BASE 0xfe000000 -#define ENP2611_CALEB_SIZE 0x00100000 - -#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000 -#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000 -#define ENP2611_PM3386_0_SIZE 0x00100000 - -#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000 -#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000 -#define ENP2611_PM3386_1_SIZE 0x00100000 - -#define ENP2611_GPIO_SCL 7 -#define ENP2611_GPIO_SDA 6 - -#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4 -#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3 -#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2 -#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1 -#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0 - - -#endif diff --git a/include/asm-arm/arch-ixp2000/entry-macro.S b/include/asm-arm/arch-ixp2000/entry-macro.S deleted file mode 100644 index 11d512ad5945..000000000000 --- a/include/asm-arm/arch-ixp2000/entry-macro.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/entry-macro.S - * - * Low-level IRQ helper macros for IXP2000-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \irqnr, #0x0 @clear out irqnr as default - mov \base, #0xfe000000 - orr \base, \base, #0x00e00000 - orr \base, \base, #0x08 - ldr \irqstat, [\base] @ get interrupts - - cmp \irqstat, #0 - beq 1001f - - clz \irqnr, \irqstat - mov \base, #31 - subs \irqnr, \base, \irqnr - - /* - * We handle PCIA and PCIB here so we don't have an - * extra layer of code just to check these two bits. - */ - cmp \irqnr, #IRQ_IXP2000_PCI - bne 1001f - - mov \base, #0xfe000000 - orr \base, \base, #0x00c00000 - orr \base, \base, #0x00000100 - orr \base, \base, #0x00000058 - ldr \irqstat, [\base] - - mov \tmp, #(1<<26) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIA - bne 1001f - - mov \tmp, #(1<<27) - tst \irqstat, \tmp - movne \irqnr, #IRQ_IXP2000_PCIB - -1001: - .endm - diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h deleted file mode 100644 index 03cbbe1fd9d8..000000000000 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/gpio.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software, you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * IXP2000 GPIO in/out, edge/level detection for IRQs: - * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High - * or both Falling-edge and Rising-edge. - * This must be called *before* the corresponding IRQ is registerd. - * Use this instead of directly setting the GPIO registers. - * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) - */ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#ifndef __ASSEMBLY__ - -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define IXP2000_GPIO_LOW 0 -#define IXP2000_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value == IXP2000_GPIO_HIGH) { - ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); - } else if (value == IXP2000_GPIO_LOW) { - ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); - } -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/hardware.h b/include/asm-arm/arch-ixp2000/hardware.h deleted file mode 100644 index e7ea781c48aa..000000000000 --- a/include/asm-arm/arch-ixp2000/hardware.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/hardware.h - * - * Hardware definitions for IXP2400/2800 based systems - * - * Original Author: Naeem M Afzal - * - * Maintainer: Deepak Saxena - * - * Copyright (C) 2001-2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -/* - * This needs to be platform-specific? - */ -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - -#include "ixp2000-regs.h" /* Chipset Registers */ - -#define pcibios_assign_all_busses() 0 - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific bits - */ -#include "enp2611.h" /* ENP-2611 */ -#include "ixdp2x00.h" /* IXDP2400/2800 */ -#include "ixdp2x01.h" /* IXDP2401/2801 */ - -#endif /* _ASM_ARCH_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h deleted file mode 100644 index 5dc1d25dcb4f..000000000000 --- a/include/asm-arm/arch-ixp2000/io.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/io.h - * - * Original Author: Naeem M Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyrgiht (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff -#define __mem_pci(a) (a) - -/* - * The A? revisions of the IXP2000s assert byte lanes for PCI I/O - * transactions the other way round (MEM transactions don't have this - * issue), so if we want to support those models, we need to override - * the standard I/O functions. - * - * B0 and later have a bit that can be set to 1 to get the proper - * behavior for I/O transactions, which then allows us to use the - * standard I/O functions. This is what we do if the user does not - * explicitly ask for support for pre-B0. - */ -#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) - -#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) - -#define outb(v,p) __raw_writeb((v),alignb(___io(p))) -#define outw(v,p) __raw_writew((v),alignw(___io(p))) -#define outl(v,p) __raw_writel((v),___io(p)) - -#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; }) -#define inw(p) \ - ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; }) -#define inl(p) \ - ({ unsigned int __v = (__raw_readl(___io(p))); __v; }) - -#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l) -#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l) -#define outsl(p,d,l) __raw_writesl(___io(p),d,l) - -#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l) -#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) -#define insl(p,d,l) __raw_readsl(___io(p),d,l) - -#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) - -#define ioread8(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readb(alignb(p)); \ - } else { \ - __v = __raw_readb(p); \ - } \ - \ - __v; \ - }) \ - -#define ioread16(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readw(alignw(p)); \ - } else { \ - __v = le16_to_cpu(__raw_readw(p)); \ - } \ - \ - __v; \ - }) - -#define ioread32(p) \ - ({ \ - unsigned int __v; \ - \ - if (__is_io_address(p)) { \ - __v = __raw_readl(p); \ - } else { \ - __v = le32_to_cpu(__raw_readl(p)); \ - } \ - \ - __v; \ - }) - -#define iowrite8(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writeb((v), alignb(p)); \ - } else { \ - __raw_writeb((v), p); \ - } \ - }) - -#define iowrite16(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writew((v), alignw(p)); \ - } else { \ - __raw_writew(cpu_to_le16(v), p); \ - } \ - }) - -#define iowrite32(v,p) \ - ({ \ - if (__is_io_address(p)) { \ - __raw_writel((v), p); \ - } else { \ - __raw_writel(cpu_to_le32(v), p); \ - } \ - }) - -#define ioport_map(port, nr) ___io(port) - -#define ioport_unmap(addr) -#else -#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h deleted file mode 100644 index 62f09c7ff420..000000000000 --- a/include/asm-arm/arch-ixp2000/irqs.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/irqs.h - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _IRQS_H -#define _IRQS_H - -/* - * Do NOT add #ifdef MACHINE_FOO in here. - * Simpy add your machine IRQs here and increase NR_IRQS if needed to - * hold your machine's IRQ table. - */ - -/* - * Some interrupt numbers go unused b/c the IRQ mask/ummask/status - * register has those bit reserved. We just mark those interrupts - * as invalid and this allows us to do mask/unmask with a single - * shift operation instead of having to map the IRQ number to - * a HW IRQ number. - */ -#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */ -#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/ -#define IRQ_IXP2000_UART 2 -#define IRQ_IXP2000_GPIO 3 -#define IRQ_IXP2000_TIMER1 4 -#define IRQ_IXP2000_TIMER2 5 -#define IRQ_IXP2000_TIMER3 6 -#define IRQ_IXP2000_TIMER4 7 -#define IRQ_IXP2000_PMU 8 -#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */ -#define IRQ_IXP2000_DMA1 10 -#define IRQ_IXP2000_DMA2 11 -#define IRQ_IXP2000_DMA3 12 -#define IRQ_IXP2000_PCI_DOORBELL 13 -#define IRQ_IXP2000_ME_ATTN 14 -#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */ -#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */ -#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */ -#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */ -#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */ -#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */ -#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */ -#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */ -#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */ - -/* define generic GPIOs */ -#define IRQ_IXP2000_GPIO0 32 -#define IRQ_IXP2000_GPIO1 33 -#define IRQ_IXP2000_GPIO2 34 -#define IRQ_IXP2000_GPIO3 35 -#define IRQ_IXP2000_GPIO4 36 -#define IRQ_IXP2000_GPIO5 37 -#define IRQ_IXP2000_GPIO6 38 -#define IRQ_IXP2000_GPIO7 39 - -/* split off the 2 PCI sources */ -#define IRQ_IXP2000_PCIA 40 -#define IRQ_IXP2000_PCIB 41 - -/* Int sources from IRQ_ERROR_STATUS */ -#define IRQ_IXP2000_DRAM0_MIN_ERR 42 -#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 -#define IRQ_IXP2000_DRAM1_MIN_ERR 44 -#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 -#define IRQ_IXP2000_DRAM2_MIN_ERR 46 -#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 -/* 48-57 reserved */ -#define IRQ_IXP2000_SRAM0_ERR 58 -#define IRQ_IXP2000_SRAM1_ERR 59 -#define IRQ_IXP2000_SRAM2_ERR 60 -#define IRQ_IXP2000_SRAM3_ERR 61 -/* 62-65 reserved */ -#define IRQ_IXP2000_MEDIA_ERR 66 -#define IRQ_IXP2000_PCI_ERR 67 -#define IRQ_IXP2000_SP_INT 68 - -#define NR_IXP2000_IRQS 69 - -#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) - -#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) - -#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) -#define IXP2000_VALID_ERR_IRQ_MASK (\ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ - IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) - -/* - * This allows for all the on-chip sources plus up to 32 CPLD based - * IRQs. Should be more than enough. - */ -#define IXP2000_BOARD_IRQS 32 -#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS) - - -/* - * IXDP2400 specific IRQs - */ -#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7) - -#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1) -#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS - -/* IXDP2800 specific IRQs */ -#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1) -#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5) - -#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1) -#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS - -/* - * IRQs on both IXDP2x01 boards - */ -#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2) -#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3) -#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4) -#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5) -#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6) -#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7) -#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8) -#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16) -#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17) -#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18) -#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19) -#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21) -#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22) -#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24) -#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25) -#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26) - -#define IXDP2X01_VALID_IRQ_MASK ( \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) ) - -/* - * IXDP2401 specific IRQs - */ -#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1) - -#define IXDP2401_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546)) - -/* - * IXDP2801-specific IRQs - */ -#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0) -#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27) -#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28) - -#define IXDP2801_VALID_IRQ_MASK ( \ - IXDP2X01_VALID_IRQ_MASK | \ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\ - IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF)) - -#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1) - -#endif /*_IRQS_H*/ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h deleted file mode 100644 index 546e2e8e27b8..000000000000 --- a/include/asm-arm/arch-ixp2000/ixdp2x00.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixdp2x00.h - * - * Register and other defines for IXDP2[48]00 platforms - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXDP2X00_H_ -#define _IXDP2X00_H_ - -/* - * On board CPLD memory map - */ -#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000 -#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X00_CPLD_SIZE 0x00100000 - - -#define IXDP2X00_CPLD_REG(x) \ - (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x) - -/* - * IXDP2400 CPLD registers - */ -#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0) -#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4) -#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8) -#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc) -#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10) -#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14) -#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18) -#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48) - -/* - * IXDP2800 CPLD registers - */ -#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0) -#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140) - - -#define IXDP2X00_GPIO_I2C_ENABLE 0x02 -#define IXDP2X00_GPIO_SCL 0x07 -#define IXDP2X00_GPIO_SDA 0x06 - -/* - * PCI devfns for on-board devices. We need these to be able to - * properly translate IRQs and for device removal. - */ -#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */ -#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */ -#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */ -#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */ - -#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */ -#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */ -#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */ -#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */ -#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */ - -#ifndef __ASSEMBLY__ -/* - * The master NPU is always PCI master. - */ -static inline unsigned int ixdp2x00_master_npu(void) -{ - return !!ixp2000_is_pcimaster(); -} - -/* - * Helper functions used by ixdp2400 and ixdp2800 specific code - */ -void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long); -void ixdp2x00_slave_pci_postinit(void); -void ixdp2x00_init_machine(void); -void ixdp2x00_map_io(void); - -#endif - -#endif /*_IXDP2X00_H_ */ diff --git a/include/asm-arm/arch-ixp2000/ixdp2x01.h b/include/asm-arm/arch-ixp2000/ixdp2x01.h deleted file mode 100644 index c6d51426e98f..000000000000 --- a/include/asm-arm/arch-ixp2000/ixdp2x01.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixdp2x01.h - * - * Platform definitions for IXDP2X01 && IXDP2801 systems - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * Based on original code Copyright (c) 2002-2003 Intel Corporation - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __IXDP2X01_H__ -#define __IXDP2X01_H__ - -#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000 -#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000 -#define IXDP2X01_CPLD_REGION_SIZE 0x00100000 - -#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg) -#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg) - -#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40) -#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40) - -#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60) -#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60) - -#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80) -#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16) - -#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00) -#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08) -#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C) -#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10) -#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG -#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14) - -#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20) - -#define IXDP2X01_CPLD_FLASH_INTERN 0x8000 -#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF -#define IXDP2X01_FLASH_WINDOW_BITS 25 -#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS) -#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1) - -#define IXDP2X01_UART_CLK 1843200 - -#define IXDP2X01_GPIO_I2C_ENABLE 0x02 -#define IXDP2X01_GPIO_SCL 0x07 -#define IXDP2X01_GPIO_SDA 0x06 - -#endif /* __IXDP2x01_H__ */ diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h deleted file mode 100644 index ccae4bec92c5..000000000000 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ /dev/null @@ -1,457 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixp2000-regs.h - * - * Chipset register definitions for IXP2400/2800 based systems. - * - * Original Author: Naeem Afzal - * - * Maintainer: Deepak Saxena - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXP2000_REGS_H_ -#define _IXP2000_REGS_H_ - -/* - * IXP2000 linux memory map: - * - * virt phys size - * fb000000 db000000 16M PCI CFG1 - * fc000000 da000000 16M PCI CFG0 - * fd000000 d8000000 16M PCI I/O - * fe[0-7]00000 8M per-platform mappings - * fe900000 80000000 1M SRAM #0 (first MB) - * fea00000 cb400000 1M SCRATCH ring get/put - * feb00000 c8000000 1M MSF - * fec00000 df000000 1M PCI CSRs - * fed00000 de000000 1M PCI CREG - * fee00000 d6000000 1M INTCTL - * fef00000 c0000000 1M CAP - */ - -/* - * Static I/O regions. - * - * Most of the registers are clumped in 4K regions spread throughout - * the 0xc0000000 -> 0xc0100000 address range, but we just map in - * the whole range using a single 1 MB section instead of small - * 4K pages. This has two advantages for us: - * - * 1) We use only one TLB entry for large number of on-chip I/O devices. - * - * 2) We can easily set the Section attributes to XCB=101 on the IXP2400 - * as required per erratum #66. We accomplish this by using a - * new MT_IXP2000_DEVICE memory type with the bits set as required. - * - * CAP stands for CSR Access Proxy. - * - * If you change the virtual address of this mapping, please propagate - * the change to arch/arm/kernel/debug.S, which hardcodes the virtual - * address of the UART located in this region. - */ - -#define IXP2000_CAP_PHYS_BASE 0xc0000000 -#define IXP2000_CAP_VIRT_BASE 0xfef00000 -#define IXP2000_CAP_SIZE 0x00100000 - -/* - * Addresses for specific on-chip peripherals. - */ -#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 -#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 -#define IXP2000_UART_PHYS_BASE 0xc0030000 -#define IXP2000_UART_VIRT_BASE 0xfef30000 -#define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 -#define IXP2000_GPIO_VIRT_BASE 0xfef10000 - -/* - * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual - * addresses of the INTCTL and PCI_CSR mappings are hardcoded in - * entry-macro.S, so if you ever change these please propagate - * the change. - */ -#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 -#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 -#define IXP2000_INTCTL_SIZE 0x00100000 - -#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 -#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 -#define IXP2000_PCI_CREG_SIZE 0x00100000 - -#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 -#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 -#define IXP2000_PCI_CSR_SIZE 0x00100000 - -#define IXP2000_MSF_PHYS_BASE 0xc8000000 -#define IXP2000_MSF_VIRT_BASE 0xfeb00000 -#define IXP2000_MSF_SIZE 0x00100000 - -#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 -#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 -#define IXP2000_SCRATCH_RING_SIZE 0x00100000 - -#define IXP2000_SRAM0_PHYS_BASE 0x80000000 -#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 -#define IXP2000_SRAM0_SIZE 0x00100000 - -#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 -#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 -#define IXP2000_PCI_IO_SIZE 0x01000000 - -#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 -#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 -#define IXP2000_PCI_CFG0_SIZE 0x01000000 - -#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 -#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 -#define IXP2000_PCI_CFG1_SIZE 0x01000000 - -/* - * Timers - */ -#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) -/* Timer control */ -#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) -#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) -#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) -#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) -/* Store initial value */ -#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) -#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) -#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) -#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) -/* Read current value */ -#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) -#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) -#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) -#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) -/* Clear associated timer interrupt */ -#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) -#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) -#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) -#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) -/* Timer watchdog enable for T4 */ -#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) - -#define WDT_ENABLE 0x00000001 -#define TIMER_DIVIDER_256 0x00000008 -#define TIMER_ENABLE 0x00000080 -#define IRQ_MASK_TIMER1 (1 << 4) - -/* - * Interrupt controller registers - */ -#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) -#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) -#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) -#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) -#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) -#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) -#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) -#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) -#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) -#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) -#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) -#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) -#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) -#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) -#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) -#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) -#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) -#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) -#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) -#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) -#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) -#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) -#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) -#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) -#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) -#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) -#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) -#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) -#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) -#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) -#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) -#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) - -/* - * Mask of valid IRQs in the 32-bit IRQ register. We use - * this to mark certain IRQs as being invalid. - */ -#define IXP2000_VALID_IRQ_MASK 0x0f0fffff - -/* - * PCI config register access from core - */ -#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) -#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) -#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) -#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) -#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) - -/* - * PCI CSRs - */ -#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) - -/* - * PCI outbound interrupts - */ -#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) -#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) -/* - * PCI communications - */ -#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) -#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) -#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) -#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) -#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) -#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) -#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) -#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) - -/* - * DMA engines - */ -#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) -#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) -#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) -#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) -#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) -#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) -#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) -#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) -#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) -#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) -#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) -#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) -#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) -#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) -#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) -#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) -#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) -#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) -#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) -/* - * Size masks for BARs - */ -#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) -#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) -/* - * Control and uEngine related - */ -#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) -#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) -#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) -#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) -#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) -#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) -/* - * Inbound PCI interrupt control - */ -#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) -#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) - -#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ -#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ - -/* These are from the IRQ register in the PCI ISR register */ -#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ -#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ -#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ -#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ - -#define IXP2000_PCI_RST_REL (1 << 2) -#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) -#define CFG_PCI_BOOT_HOST (1 << 2) -#define CFG_BOOT_PROM (1 << 1) - -/* - * SlowPort CSRs - * - * The slowport is used to access things like flash, SONET framer control - * ports, slave microprocessors, CPLDs, and others of chip memory mapped - * peripherals. - */ -#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) - -#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) -#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) -#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) -#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) -#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) -#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) -#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) -#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) -#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) -#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) -#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) - -/* - * CCR values. - * The CCR configures the clock division for the slowport interface. - */ -#define SLOWPORT_CCR_DIV_1 0x00 -#define SLOWPORT_CCR_DIV_2 0x01 -#define SLOWPORT_CCR_DIV_4 0x02 -#define SLOWPORT_CCR_DIV_6 0x03 -#define SLOWPORT_CCR_DIV_8 0x04 -#define SLOWPORT_CCR_DIV_10 0x05 -#define SLOWPORT_CCR_DIV_12 0x06 -#define SLOWPORT_CCR_DIV_14 0x07 -#define SLOWPORT_CCR_DIV_16 0x08 -#define SLOWPORT_CCR_DIV_18 0x09 -#define SLOWPORT_CCR_DIV_20 0x0a -#define SLOWPORT_CCR_DIV_22 0x0b -#define SLOWPORT_CCR_DIV_24 0x0c -#define SLOWPORT_CCR_DIV_26 0x0d -#define SLOWPORT_CCR_DIV_28 0x0e -#define SLOWPORT_CCR_DIV_30 0x0f - -/* - * PCR values. PCR configure the mode of the interface. - */ -#define SLOWPORT_MODE_FLASH 0x00 -#define SLOWPORT_MODE_LUCENT 0x01 -#define SLOWPORT_MODE_PMC_SIERRA 0x02 -#define SLOWPORT_MODE_INTEL_UP 0x03 -#define SLOWPORT_MODE_MOTOROLA_UP 0x04 - -/* - * ADC values. Defines data and address bus widths. - */ -#define SLOWPORT_ADDR_WIDTH_8 0x00 -#define SLOWPORT_ADDR_WIDTH_16 0x01 -#define SLOWPORT_ADDR_WIDTH_24 0x02 -#define SLOWPORT_ADDR_WIDTH_32 0x03 -#define SLOWPORT_DATA_WIDTH_8 0x00 -#define SLOWPORT_DATA_WIDTH_16 0x10 -#define SLOWPORT_DATA_WIDTH_24 0x20 -#define SLOWPORT_DATA_WIDTH_32 0x30 - -/* - * Masks and shifts for various fields in the WTC and RTC registers. - */ -#define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_PW 0x003c -#define SLOWPORT_WRTC_MASK_SU 0x03c0 - -#define SLOWPORT_WRTC_SHIFT_HD 0x00 -#define SLOWPORT_WRTC_SHIFT_SU 0x02 -#define SLOWPORT_WRTC_SHFIT_PW 0x06 - - -/* - * GPIO registers & GPIO interface. - */ -#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) -#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) -#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) -#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) -#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) -#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) -#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) -#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) -#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) -#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) -#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) -#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) -#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) -#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) -#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) -#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) -#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) -#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) - -/* - * "Global" registers...whatever that's supposed to mean. - */ -#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) -#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) - -#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 -#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 -#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 -#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 -#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 -#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 -#define IXP2000_MAJ_REV_MASK 0x000000F0 -#define IXP2000_MIN_REV_MASK 0x0000000F -#define IXP2000_PROD_ID_MASK 0xFFFFFFFF - -#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) -#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) -#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) -#define IXP2000_RESET0 GLOBAL_REG(0x0c) -#define IXP2000_RESET1 GLOBAL_REG(0x10) -#define IXP2000_CCR GLOBAL_REG(0x14) -#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) - -#define RSTALL (1 << 16) -#define WDT_RESET_ENABLE 0x01000000 - - -/* - * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF - * units, but the registers that differ between the two don't overlap, - * so we can have one register list for both. - */ -#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) -#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) -#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) -#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) -#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) -#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) -#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) -#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) -#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) -#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) -#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) -#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) -#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) -#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) -#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) -#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) -#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) -#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) -#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) -#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) -#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) -#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) -#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) -#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) -#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) -#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) -#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) -#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) -#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) -#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) - - -#endif /* _IXP2000_H_ */ diff --git a/include/asm-arm/arch-ixp2000/memory.h b/include/asm-arm/arch-ixp2000/memory.h deleted file mode 100644 index 21e1de51e3f6..000000000000 --- a/include/asm-arm/arch-ixp2000/memory.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/memory.h - * - * Copyright (c) 2002 Intel Corp. - * Copyright (c) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#include - -#define __virt_to_bus(v) \ - (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0))) - -#define __bus_to_virt(b) \ - __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0))) - -#endif - diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h deleted file mode 100644 index a66317ab2071..000000000000 --- a/include/asm-arm/arch-ixp2000/platform.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -/* - * On the IXP2400, we can't use XCB=000 due to chip bugs. We use - * XCB=101 instead, but that makes all I/O accesses bufferable. This - * is not a problem in general, but we do have to be slightly more - * careful because I/O writes are no longer automatically flushed out - * of the write buffer. - * - * In cases where we want to make sure that a write has been flushed - * out of the write buffer before we proceed, for example when masking - * a device interrupt before re-enabling IRQs in CPSR, we can use this - * function, ixp2000_reg_wrb, which performs a write, a readback, and - * issues a dummy instruction dependent on the value of the readback - * (mov rX, rX) to make sure that the readback has completed before we - * continue. - */ -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - unsigned long dummy; - - *((volatile unsigned long *)reg) = val; - - dummy = *((volatile unsigned long *)reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Boards may multiplex different devices on the 2nd channel of - * the slowport interface that each need different configuration - * settings. For example, the IXDP2400 uses channel 2 on the interface - * to access the CPLD, the switch fabric card, and the media card. Each - * one needs a different mode so drivers must save/restore the mode - * before and after each operation. - * - * acquire_slowport(&your_config); - * ... - * do slowport operations - * ... - * release_slowport(); - * - * Note that while you have the slowport, you are holding a spinlock, - * so your code should be written as if you explicitly acquired a lock. - * - * The configuration only affects device 2 on the slowport, so the - * MTD map driver does not acquire/release the slowport. - */ -struct slowport_cfg { - unsigned long CCR; /* Clock divide */ - unsigned long WTC; /* Write Timing Control */ - unsigned long RTC; /* Read Timing Control */ - unsigned long PCR; /* Protocol Control Register */ - unsigned long ADC; /* Address/Data Width Control */ -}; - - -void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *); -void ixp2000_release_slowport(struct slowport_cfg *); - -/* - * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires - * tweaking of addresses in the MTD driver. - */ -static inline unsigned ixp2000_has_broken_slowport(void) -{ - unsigned long id = *IXP2000_PRODUCT_ID; - unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK | - IXP2000_MIN_PROD_TYPE_MASK); - return (((id_prod == - /* fixed in IXP2400-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2400)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2800-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2800)) && - ((id & IXP2000_MAJ_REV_MASK) == 0)) || - ((id_prod == - /* fixed in IXP2850-B0 */ - (IXP2000_MAJ_PROD_TYPE_IXP2000 | - IXP2000_MIN_PROD_TYPE_IXP2850)) && - ((id & IXP2000_MAJ_REV_MASK) == 0))); -} - -static inline unsigned int ixp2000_has_flash(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM)); -} - -static inline unsigned int ixp2000_is_pcimaster(void) -{ - return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST)); -} - -void ixp2000_map_io(void); -void ixp2000_uart_init(void); -void ixp2000_init_irq(void); -void ixp2000_init_time(unsigned long); -unsigned long ixp2000_gettimeoffset(void); - -struct pci_sys_data; - -u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where); -void ixp2000_pci_preinit(void); -int ixp2000_pci_setup(int, struct pci_sys_data*); -struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*); -int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *); -int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32); - -/* - * Several of the IXP2000 systems have banked flash so we need to extend the - * flash_platform_data structure with some private pointers - */ -struct ixp2000_flash_data { - struct flash_platform_data *platform_data; - int nr_banks; - unsigned long (*bank_setup)(unsigned long); -}; - -struct ixp2000_i2c_pins { - unsigned long sda_pin; - unsigned long scl_pin; -}; - - -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h deleted file mode 100644 index 8731dd36e452..000000000000 --- a/include/asm-arm/arch-ixp2000/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/system.h - * - * Copyright (C) 2002 Intel Corp. - * Copyricht (C) 2003-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - local_irq_disable(); - - /* - * Reset flash banking register so that we are pointing at - * RedBoot bank. - */ - if (machine_is_ixdp2401()) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, - ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN)); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); - } - - /* - * On IXDP2801 we need to write this magic sequence to the CPLD - * to cause a complete reset of the CPU and all external devices - * and move the flash bank register back to 0. - */ - if (machine_is_ixdp2801() || machine_is_ixdp28x5()) { - unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; - - reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); - ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); - } - - ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); -} diff --git a/include/asm-arm/arch-ixp2000/timex.h b/include/asm-arm/arch-ixp2000/timex.h deleted file mode 100644 index b78a183d4698..000000000000 --- a/include/asm-arm/arch-ixp2000/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/timex.h - * - * IXP2000 architecture timex specifications - */ - - -/* - * Default clock is 50MHz APB, but platform code can override this - */ -#define CLOCK_TICK_RATE 50000000 - - diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h deleted file mode 100644 index f66b408f363e..000000000000 --- a/include/asm-arm/arch-ixp2000/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/uncompress.h - * - * - * Original Author: Naeem Afzal - * Maintainer: Deepak Saxena - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include - -#define UART_BASE 0xc0030000 - -#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x)) - -#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */ -#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/ -#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/ -#define UARTIER PHYS(0x04) /* Interrupt enable reg */ -#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/ -#define UARTLCR PHYS(0x0c) /* Control reg */ -#define UARTSR PHYS(0x14) /* Status reg */ - - -static inline void putc(int c) -{ - int j = 0x1000; - - while (--j && !(*UARTSR & UART_LSR_THRE)) - barrier(); - - *UARTDR = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-ixp2000/vmalloc.h b/include/asm-arm/arch-ixp2000/vmalloc.h deleted file mode 100644 index 275136963a0c..000000000000 --- a/include/asm-arm/arch-ixp2000/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp2000/vmalloc.h - * - * Author: Naeem Afzal - * - * Copyright 2002 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END 0xfb000000 diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S deleted file mode 100644 index 2b25e640247d..000000000000 --- a/include/asm-arm/arch-ixp23xx/debug-macro.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical - ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual -#ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 -#endif - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h deleted file mode 100644 index 2f4335e3b836..000000000000 --- a/include/asm-arm/arch-ixp23xx/dma.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/dma.h - */ diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S deleted file mode 100644 index ec9dd6fc2d0f..000000000000 --- a/include/asm-arm/arch-ixp23xx/entry-macro.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/entry-macro.S - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) - ldr \irqnr, [\irqnr] @ get interrupt number - cmp \irqnr, #0x0 @ spurious interrupt ? - movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits - subne \irqnr, \irqnr, #1 @ convert to 0 based - -#if 0 - cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH - bne 1001f - mov \irqnr, #IRQ_IXP23XX_INTA - - ldr \irqnr, =0xf5000030 - - mov \tmp, #(1<<26) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTB - - mov \tmp, #(1<<27) - tst \irqnr, \tmp - movne \irqnr, #IRQ_IXP23XX_INTA -1001: -#endif - .endm diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h deleted file mode 100644 index c0010d21a684..000000000000 --- a/include/asm-arm/arch-ixp23xx/hardware.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/hardware.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * Copyricht (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Hardware definitions for IXP23XX based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* PCI IO info */ -#define PCIO_BASE IXP23XX_PCI_IO_VIRT -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0xe0000000 - -#include "ixp23xx.h" - -#define pcibios_assign_all_busses() 0 - -/* - * Platform helper functions - */ -#include "platform.h" - -/* - * Platform-specific headers - */ -#include "ixdp2351.h" - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h deleted file mode 100644 index 66f5bafc315c..000000000000 --- a/include/asm-arm/arch-ixp23xx/io.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/io.h - * - * Original Author: Naeem M Afzal - * Maintainer: Deepak Saxena - * - * Copyright (C) 2003-2005 Intel Corp. - * Copyright (C) 2005 MontaVista Software, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) -#define __mem_pci(a) (a) - -#include /* For BUG */ - -static inline void __iomem * -ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype) -{ - if (addr >= IXP23XX_PCI_MEM_START && - addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { - if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) - return NULL; - - return (void __iomem *) - ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); - } - - return __arm_ioremap(addr, size, mtype); -} - -static inline void -ixp23xx_iounmap(void __iomem *addr) -{ - if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) && - (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE)) - return; - - __iounmap(addr); -} - -#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f) -#define __arch_iounmap(a) ixp23xx_iounmap(a) - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h deleted file mode 100644 index 27c580898958..000000000000 --- a/include/asm-arm/arch-ixp23xx/irqs.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/irqs.h - * - * IRQ definitions for IXP23XX based systems - * - * Author: Naeem Afzal - * - * Copyright (C) 2003-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 -#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS - - -#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ -#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ -#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ -#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ -#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ -#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ -#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ -#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ -#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ -#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ -#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ -#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ -#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ -#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ -#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ -#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ -#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ -#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ -#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ -#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ -#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ -#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ -#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ -#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ -#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ -#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ -#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ -#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ -#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ -#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ -#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ -#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ -#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ -#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ -#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ -#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ -#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ -#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ -#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ -#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ -#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ -#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ -#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ -#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ -#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ -#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ -#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ - -#define NUM_IXP23XX_RAW_IRQS 120 - -#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ -#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ - -#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) - -/* - * We default to 32 per-board IRQs. Increase this number if you need - * more, but keep it realistic. - */ -#define NR_IXP23XX_MACH_IRQS 32 - -#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS) - -#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) - - -/* - * IXDP2351-specific interrupts - */ - -/* - * External PCI interrupts signaled through INTB - * - */ -#define IXDP2351_INTB_IRQ_BASE 0 -#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) -#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) -#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) -#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) -#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) -#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) -#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) -#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) -#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) - -#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) -#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) -#define IXDP2351_INTB_IRQ_VALID 0x01FF -#define IXDP2351_INTB_IRQ_NUM 16 - -/* - * Other external interrupts signaled through INTA - */ -#define IXDP2351_INTA_IRQ_BASE 16 -#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) -#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) -#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) -#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) -#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) -#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) -#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) -#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) -#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) -#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) -#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) -#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) -#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) -#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) - -#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) -#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) -#define IXDP2351_INTA_IRQ_VALID 0xFF3F -#define IXDP2351_INTA_IRQ_NUM 16 - - -/* - * ADI RoadRunner IRQs - */ -#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA -#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB -#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 -#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 - -/* - * Put new board definitions here - */ - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h deleted file mode 100644 index d5e8a43d7bbd..000000000000 --- a/include/asm-arm/arch-ixp23xx/ixdp2351.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/ixdp2351.h - * - * Register and other defines for IXDP2351 - * - * Copyright (c) 2002-2004 Intel Corp. - * Copytight (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_IXDP2351_H -#define __ASM_ARCH_IXDP2351_H - -/* - * NP module memory map - */ -#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) -#define IXDP2351_NP_PHYS_SIZE 0x00100000 -#define IXDP2351_NP_VIRT_BASE 0xeff00000 - -#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) -#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) - -#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) - -#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) - -#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) -#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) -#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) - -/* - * Base board module memory map - */ - -#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) -#define IXDP2351_BB_SIZE 0x01000000 -#define IXDP2351_BB_BASE_VIRT (0xee000000) - -#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) - -#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) -#define IXDP2351_NVRAM_SIZE (0x20000) - -#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000) -#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) -#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) -#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) -#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) -#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) - -/* - * On board CPLD registers - */ -#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) - -#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) -#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) - -#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA -#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 - -#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) -#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) -#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) -#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) -#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) -#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ -#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ -#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ -#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ -#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) -#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) - /* Interrupt bits are defined in irqs.h */ -#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) -#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) - -/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ -/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ -/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ -/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ -/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h deleted file mode 100644 index 3927b1d61b17..000000000000 --- a/include/asm-arm/arch-ixp23xx/ixp23xx.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/ixp23xx.h - * - * Register definitions for IXP23XX - * - * Copyright (C) 2003-2005 Intel Corporation. - * Copyright (C) 2005 MontaVista Software, Inc. - * - * Maintainer: Deepak Saxena - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IXP23XX_H -#define __ASM_ARCH_IXP23XX_H - -/* - * IXP2300 linux memory map: - * - * virt phys size - * fffd0000 a0000000 64K XSI2CPP_CSR - * fffc0000 c4000000 4K EXP_CFG - * fff00000 c8000000 64K PERIPHERAL - * fe000000 1c0000000 16M CAP_CSR - * fd000000 1c8000000 16M MSF_CSR - * fb000000 16M --- - * fa000000 1d8000000 32M PCI_IO - * f8000000 1da000000 32M PCI_CFG - * f6000000 1de000000 32M PCI_CREG - * f4000000 32M --- - * f0000000 1e0000000 64M PCI_MEM - * e[c-f]000000 per-platform mappings - */ - - -/**************************************************************************** - * Static mappings. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 -#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 -#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 - -#define IXP23XX_EXP_CFG_PHYS 0xc4000000 -#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 -#define IXP23XX_EXP_CFG_SIZE 0x00001000 - -#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 -#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 -#define IXP23XX_PERIPHERAL_SIZE 0x00010000 - -#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL -#define IXP23XX_CAP_CSR_VIRT 0xfe000000 -#define IXP23XX_CAP_CSR_SIZE 0x01000000 - -#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL -#define IXP23XX_MSF_CSR_VIRT 0xfd000000 -#define IXP23XX_MSF_CSR_SIZE 0x01000000 - -#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL -#define IXP23XX_PCI_IO_VIRT 0xfa000000 -#define IXP23XX_PCI_IO_SIZE 0x02000000 - -#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL -#define IXP23XX_PCI_CFG_VIRT 0xf8000000 -#define IXP23XX_PCI_CFG_SIZE 0x02000000 -#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT -#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) - -#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL -#define IXP23XX_PCI_CREG_VIRT 0xf6000000 -#define IXP23XX_PCI_CREG_SIZE 0x02000000 -#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) - -#define IXP23XX_PCI_MEM_START 0xe0000000 -#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL -#define IXP23XX_PCI_MEM_VIRT 0xf0000000 -#define IXP23XX_PCI_MEM_SIZE 0x04000000 - - -/**************************************************************************** - * XSI2CPP CSRs. - ****************************************************************************/ -#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) -#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) -#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) -#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) -#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) - - -/**************************************************************************** - * Expansion Bus Config. - ****************************************************************************/ -#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) -#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) -#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) -#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) -#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) -#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) -#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) -#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) -#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) -#define IXP23XX_FLASH_WRITABLE (0x2) -#define IXP23XX_FLASH_BUS8 (0x1) - -#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) -#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) -#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) -#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) -#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) -#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) -#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) -#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) -#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) -#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) -#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) -#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) -#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) -#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) -#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) -#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) - -#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) -#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) -#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34) - -#define IXP23XX_EXP_BUS_PHYS 0x90000000 -#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 - -#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) -#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) -#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) -#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) -#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) -#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) -#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) -#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) - - -/**************************************************************************** - * Peripherals. - ****************************************************************************/ -#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) -#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) -#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) -#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) -#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) -#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) -#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) -#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) -#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) -#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) -#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) -#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) -#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) -#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) - -#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) -#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) -#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) -#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) -#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) -#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) -#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) -#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) -#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) -#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) -#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) -#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) -#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) -#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) - - -/**************************************************************************** - * Interrupt controller. - ****************************************************************************/ -#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) -#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) -#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) -#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) -#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) -#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) -#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) -#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) -#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) -#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) -#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) -#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) -#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) -#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) -#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) -#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) -#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) -#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 - - -/**************************************************************************** - * GPIO. - ****************************************************************************/ -#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) -#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) -#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) -#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) -#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) -#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) -#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) -#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) -#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) - -#define IXP23XX_GPIO_STYLE_MASK 0x7 -#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 - -#define IXP23XX_GPIO_STYLE_SIZE 3 - - -/**************************************************************************** - * Timer. - ****************************************************************************/ -#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) -#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) -#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) -#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) -#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) -#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) -#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) -#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) -#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) -#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e -#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) -#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) -#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) - -#define IXP23XX_TIMER_ENABLE (1 << 0) -#define IXP23XX_TIMER_ONE_SHOT (1 << 1) -/* Low order bits of reload value ignored */ -#define IXP23XX_TIMER_RELOAD_MASK (0x3) -#define IXP23XX_TIMER_DISABLED (0x0) -#define IXP23XX_TIMER1_INT_PEND (1 << 0) -#define IXP23XX_TIMER2_INT_PEND (1 << 1) -#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) -#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) -#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) - - -/**************************************************************************** - * CAP CSRs. - ****************************************************************************/ -#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) -#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00) -#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) -#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) -#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) -#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) -#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) - -#define IXP23XX_ENABLE_WATCHDOG (1 << 24) -#define IXP23XX_SHPC_INIT_COMP (1 << 21) -#define IXP23XX_RST_ALL (1 << 16) -#define IXP23XX_RESET_PCI (1 << 2) -#define IXP23XX_PCI_UNIT_RESET (1 << 1) -#define IXP23XX_XSCALE_RESET (1 << 0) - -#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000) - - -/**************************************************************************** - * PCI CSRs. - ****************************************************************************/ -#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) -#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) -#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) -#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) - - -#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) -#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) -#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) -#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) -#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) -#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) -#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) -#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) -#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) -#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) -#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) -#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) -#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) -#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h deleted file mode 100644 index c3d906af9fea..000000000000 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/memory.h - * - * Copyright (c) 2003-2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET (0x00000000) - - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#ifndef __ASSEMBLY__ - -#define __virt_to_bus(v) \ - ({ unsigned int ret; \ - ret = ((__virt_to_phys(v) - 0x00000000) + \ - (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ - ret; }) - -#define __bus_to_virt(b) \ - ({ unsigned int data; \ - data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ - __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) - -#define arch_is_coherent() 1 - -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h deleted file mode 100644 index db8aa304c93d..000000000000 --- a/include/asm-arm/arch-ixp23xx/platform.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/platform.h - * - * Various bits of code used by platform-level code. - * - * Author: Deepak Saxena - * - * Copyright 2005 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASSEMBLY__ - -static inline unsigned long ixp2000_reg_read(volatile void *reg) -{ - return *((volatile unsigned long *)reg); -} - -static inline void ixp2000_reg_write(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val) -{ - *((volatile unsigned long *)reg) = val; -} - -struct pci_sys_data; - -void ixp23xx_map_io(void); -void ixp23xx_init_irq(void); -void ixp23xx_sys_init(void); -int ixp23xx_pci_setup(int, struct pci_sys_data *); -void ixp23xx_pci_preinit(void); -struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); -void ixp23xx_pci_slave_init(void); - -extern struct sys_timer ixp23xx_timer; - -#define IXP23XX_UART_XTAL 14745600 - -#ifndef __ASSEMBLY__ -/* - * Is system memory on the XSI or CPP bus? - */ -static inline unsigned ixp23xx_cpp_boot(void) -{ - return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); -} -#endif - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h deleted file mode 100644 index 54e8a51475e6..000000000000 --- a/include/asm-arm/arch-ixp23xx/system.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/system.h - * - * Copyright (C) 2003 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(); -#endif -} - -static inline void arch_reset(char mode) -{ - /* First try machine specific support */ - if (machine_is_ixdp2351()) { - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; - (void) *IXDP2351_CPLD_RESET1_REG; - *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; - } - - /* Use on-chip reset capability */ - *IXP23XX_RESET0 |= IXP23XX_RST_ALL; -} diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h deleted file mode 100644 index f6828fdd2883..000000000000 --- a/include/asm-arm/arch-ixp23xx/time.h +++ /dev/null @@ -1,3 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/time.h - */ diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h deleted file mode 100644 index 516f72fe6082..000000000000 --- a/include/asm-arm/arch-ixp23xx/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/timex.h - * - * XScale architecture timex specifications - */ - -#define CLOCK_TICK_RATE 75000000 diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h deleted file mode 100644 index 16c1110f2304..000000000000 --- a/include/asm-arm/arch-ixp23xx/uncompress.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/uncompress.h - * - * Copyright (C) 2002-2004 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) - -static inline void putc(char c) -{ - int j; - - for (j = 0; j < 0x1000; j++) { - if (UART_BASE[UART_LSR] & UART_LSR_THRE) - break; - barrier(); - } - - UART_BASE[UART_TX] = c; -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - - -#endif diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h deleted file mode 100644 index 9f2566658541..000000000000 --- a/include/asm-arm/arch-ixp23xx/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * include/asm-arm/arch-ixp23xx/vmalloc.h - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * NPU mappings end at 0xf0000000 and we allocate 64MB for board - * specific static I/O. - */ - -#define VMALLOC_END (0xec000000) diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h deleted file mode 100644 index 88f053d64430..000000000000 --- a/include/asm-arm/arch-ixp4xx/avila.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/avila.h - * - * Gateworks Avila platform specific definitions - * - * Author: Michael-Luke Jones - * - * Based on ixdp425.h - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define AVILA_SDA_PIN 7 -#define AVILA_SCL_PIN 6 - -/* - * AVILA PCI IRQs - */ -#define AVILA_PCI_MAX_DEV 4 -#define LOFT_PCI_MAX_DEV 6 -#define AVILA_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define AVILA_PCI_INTA_PIN 11 -#define AVILA_PCI_INTB_PIN 10 -#define AVILA_PCI_INTC_PIN 9 -#define AVILA_PCI_INTD_PIN 8 - - diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h deleted file mode 100644 index 428b298afc1f..000000000000 --- a/include/asm-arm/arch-ixp4xx/coyote.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/coyote.h - * - * ADI Engineering platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -/* PCI controller GPIO to IRQ pin mappings */ -#define COYOTE_PCI_SLOT0_PIN 6 -#define COYOTE_PCI_SLOT1_PIN 11 - -#define COYOTE_PCI_SLOT0_DEVID 14 -#define COYOTE_PCI_SLOT1_DEVID 15 - -#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) -#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 -#define COYOTE_IDE_REGION_SIZE 0x1000 - -#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 -#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC -#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 - diff --git a/include/asm-arm/arch-ixp4xx/cpu.h b/include/asm-arm/arch-ixp4xx/cpu.h deleted file mode 100644 index 2fa3d6b8dbb8..000000000000 --- a/include/asm-arm/arch-ixp4xx/cpu.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/cpu.h - * - * IXP4XX cpu type detection - * - * Copyright (C) 2007 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CPU_H__ -#define __ASM_ARCH_CPU_H__ - -extern unsigned int processor_id; -/* Processor id value in CP15 Register 0 */ -#define IXP425_PROCESSOR_ID_VALUE 0x690541c0 -#define IXP435_PROCESSOR_ID_VALUE 0x69054040 -#define IXP465_PROCESSOR_ID_VALUE 0x69054200 -#define IXP4XX_PROCESSOR_ID_MASK 0xfffffff0 - -#define cpu_is_ixp42x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP425_PROCESSOR_ID_VALUE) -#define cpu_is_ixp43x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP435_PROCESSOR_ID_VALUE) -#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \ - IXP465_PROCESSOR_ID_VALUE) - -static inline u32 ixp4xx_read_feature_bits(void) -{ - unsigned int val = ~*IXP4XX_EXP_CFG2; - val &= ~IXP4XX_FEATURE_RESERVED; - if (!cpu_is_ixp46x()) - val &= ~IXP4XX_FEATURE_IXP46X_ONLY; - - return val; -} - -static inline void ixp4xx_write_feature_bits(u32 value) -{ - *IXP4XX_EXP_CFG2 = ~value; -} - -#endif /* _ASM_ARCH_CPU_H */ diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S deleted file mode 100644 index 37bc8ef23e67..000000000000 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/include/asm-arm/arch-ixp4xx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc8000000 - movne \rx, #0xff000000 - orrne \rx, \rx, #0x00b00000 - add \rx,\rx,#3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ixp4xx/dma.h b/include/asm-arm/arch-ixp4xx/dma.h deleted file mode 100644 index 0b755d6e9198..000000000000 --- a/include/asm-arm/arch-ixp4xx/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/dma.h - * - * Copyright (C) 2001-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include -#include -#include -#include - -#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ixp4xx/dsmg600.h b/include/asm-arm/arch-ixp4xx/dsmg600.h deleted file mode 100644 index 5afae8c2e296..000000000000 --- a/include/asm-arm/arch-ixp4xx/dsmg600.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * DSM-G600 platform specific definitions - * - * Copyright (C) 2006 Tower Technologies - * Author: Alessandro Zummo - * - * based on ixdp425.h: - * Copyright 2004 (C) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define DSMG600_SDA_PIN 5 -#define DSMG600_SCL_PIN 4 - -/* - * DSMG600 PCI IRQs - */ -#define DSMG600_PCI_MAX_DEV 4 -#define DSMG600_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define DSMG600_PCI_INTA_PIN 11 -#define DSMG600_PCI_INTB_PIN 10 -#define DSMG600_PCI_INTC_PIN 9 -#define DSMG600_PCI_INTD_PIN 8 -#define DSMG600_PCI_INTE_PIN 7 -#define DSMG600_PCI_INTF_PIN 6 - -/* DSM-G600 Timer Setting */ -#define DSMG600_FREQ 66000000 - -/* Buttons */ - -#define DSMG600_PB_GPIO 15 /* power button */ -#define DSMG600_RB_GPIO 3 /* reset button */ - -/* Power control */ - -#define DSMG600_PO_GPIO 2 /* power off */ - -/* LEDs */ - -#define DSMG600_LED_PWR_GPIO 0 -#define DSMG600_LED_WLAN_GPIO 14 diff --git a/include/asm-arm/arch-ixp4xx/entry-macro.S b/include/asm-arm/arch-ixp4xx/entry-macro.S deleted file mode 100644 index ed313c52a8a4..000000000000 --- a/include/asm-arm/arch-ixp4xx/entry-macro.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/entry-macro.S - * - * Low-level IRQ helper macros for IXP4xx-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET) - ldr \irqstat, [\irqstat] @ get interrupts - cmp \irqstat, #0 - beq 1001f @ upper IRQ? - clz \irqnr, \irqstat - mov \base, #31 - sub \irqnr, \base, \irqnr - b 1002f @ lower IRQ being - @ handled - -1001: - /* - * IXP465/IXP435 has an upper IRQ status register - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) - ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET) - ldr \irqstat, [\irqstat] @ get upper interrupts - mov \irqnr, #63 - clz \irqstat, \irqstat - cmp \irqstat, #32 - subne \irqnr, \irqnr, \irqstat -#endif -1002: - .endm - - diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h deleted file mode 100644 index 168b9848eb4a..000000000000 --- a/include/asm-arm/arch-ixp4xx/fsg.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/fsg.h - * - * Freecom FSG-3 platform specific definitions - * - * Author: Rod Whitby - * Author: Tomasz Chmielewski - * Maintainers: http://www.nslu2-linux.org - * - * Based on coyote.h by - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define FSG_SDA_PIN 12 -#define FSG_SCL_PIN 13 - -/* - * FSG PCI IRQs - */ -#define FSG_PCI_MAX_DEV 3 -#define FSG_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define FSG_PCI_INTA_PIN 6 -#define FSG_PCI_INTB_PIN 7 -#define FSG_PCI_INTC_PIN 5 - -/* Buttons */ - -#define FSG_SB_GPIO 4 /* sync button */ -#define FSG_RB_GPIO 9 /* reset button */ -#define FSG_UB_GPIO 10 /* usb button */ - -/* LEDs */ - -#define FSG_LED_WLAN_BIT 0 -#define FSG_LED_WAN_BIT 1 -#define FSG_LED_SATA_BIT 2 -#define FSG_LED_USB_BIT 4 -#define FSG_LED_RING_BIT 5 -#define FSG_LED_SYNC_BIT 7 diff --git a/include/asm-arm/arch-ixp4xx/gpio.h b/include/asm-arm/arch-ixp4xx/gpio.h deleted file mode 100644 index 28e7d27b1b8f..000000000000 --- a/include/asm-arm/arch-ixp4xx/gpio.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/gpio.h - * - * IXP4XX GPIO wrappers for arch-neutral GPIO calls - * - * Written by Milan Svoboda - * Based on PXA implementation by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_IXP4XX_GPIO_H -#define __ASM_ARCH_IXP4XX_GPIO_H - -#include - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - gpio_line_config(gpio, IXP4XX_GPIO_IN); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int level) -{ - gpio_line_set(gpio, level); - gpio_line_config(gpio, IXP4XX_GPIO_OUT); - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - int value; - - gpio_line_get(gpio, &value); - - return value; -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - gpio_line_set(gpio, value); -} - -#include /* cansleep wrappers */ - -extern int gpio_to_irq(int gpio); -extern int irq_to_gpio(int gpio); - -#endif - diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h deleted file mode 100644 index 2192dedc2f59..000000000000 --- a/include/asm-arm/arch-ixp4xx/gtwx5715.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/gtwx5715.h - * - * Gemtek GTWX5715 Gateway (Linksys WRV54G) - * - * Copyright 2004 (c) George T. Joseph - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif -#include "irqs.h" - -#define GTWX5715_GPIO0 0 -#define GTWX5715_GPIO1 1 -#define GTWX5715_GPIO2 2 -#define GTWX5715_GPIO3 3 -#define GTWX5715_GPIO4 4 -#define GTWX5715_GPIO5 5 -#define GTWX5715_GPIO6 6 -#define GTWX5715_GPIO7 7 -#define GTWX5715_GPIO8 8 -#define GTWX5715_GPIO9 9 -#define GTWX5715_GPIO10 10 -#define GTWX5715_GPIO11 11 -#define GTWX5715_GPIO12 12 -#define GTWX5715_GPIO13 13 -#define GTWX5715_GPIO14 14 - -#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0 -#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1 -#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2 -#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3 -#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4 -#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5 -#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6 -#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7 -#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8 -#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9 -#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10 -#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11 -#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12 -#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1 -#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2 - -/* PCI controller GPIO to IRQ pin mappings - - INTA INTB -SLOT 0 10 11 -SLOT 1 11 10 - -*/ - -#define GTWX5715_PCI_SLOT0_DEVID 0 -#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ -#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ - -#define GTWX5715_PCI_SLOT1_DEVID 1 -#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ -#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ - -#define GTWX5715_PCI_SLOT_COUNT 2 -#define GTWX5715_PCI_INT_PIN_COUNT 2 - -/* - * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch - * and operate as an SPI type interface. The details of the interface - * are available on Kendin/Micrel's web site. - */ - -#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5 -#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6 -#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7 -#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12 - -/* - * The "reset" button is wired to GPIO 3. - * The GPIO is brought "low" when the button is pushed. - */ - -#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3 -#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ - -/* - * Board Label Front Label - * LED1 Power - * LED2 Wireless-G - * LED3 not populated but could be - * LED4 Internet - * LED5 - LED8 Controlled by KS8995M Switch - * LED9 DMZ - */ - -#define GTWX5715_LED1_GPIO GTWX5715_GPIO2 -#define GTWX5715_LED2_GPIO GTWX5715_GPIO9 -#define GTWX5715_LED3_GPIO GTWX5715_GPIO8 -#define GTWX5715_LED4_GPIO GTWX5715_GPIO1 -#define GTWX5715_LED9_GPIO GTWX5715_GPIO4 diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h deleted file mode 100644 index fa723a627854..000000000000 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/hardware.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* - * Hardware definitions for IXP4xx based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000) - -/* - * We override the standard dma-mask routines for bouncing. - */ -#define HAVE_ARCH_PCI_SET_DMA_MASK - -#define pcibios_assign_all_busses() 1 - -/* Register locations and bits */ -#include "ixp4xx-regs.h" - -#ifndef __ASSEMBLER__ -#include -#endif - -/* Platform helper functions and definitions */ -#include "platform.h" - -/* Platform specific details */ -#include "ixdp425.h" -#include "avila.h" -#include "coyote.h" -#include "prpmc1100.h" -#include "nslu2.h" -#include "nas100d.h" -#include "dsmg600.h" -#include "fsg.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h deleted file mode 100644 index 8e7426081f0e..000000000000 --- a/include/asm-arm/arch-ixp4xx/io.h +++ /dev/null @@ -1,569 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/io.h - * - * Author: Deepak Saxena - * - * Copyright (C) 2002-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#include - -#define IO_SPACE_LIMIT 0xffff0000 - -extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); -extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); - - -/* - * IXP4xx provides two methods of accessing PCI memory space: - * - * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). - * To access PCI via this space, we simply ioremap() the BAR - * into the kernel and we can use the standard read[bwl]/write[bwl] - * macros. This is the preffered method due to speed but it - * limits the system to just 64MB of PCI memory. This can be - * problamatic if using video cards and other memory-heavy - * targets. - * - * 2) If > 64MB of memory space is required, the IXP4xx can be configured - * to use indirect registers to access PCI (as we do below for I/O - * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff) - * of memory on the bus. The disadvantage of this is that every - * PCI access requires three local register accesses plus a spinlock, - * but in some cases the performance hit is acceptable. In addition, - * you cannot mmap() PCI devices in this case. - * - */ -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - -#define __mem_pci(a) (a) - -#else - -#include - -/* - * In the case of using indirect PCI, we simply return the actual PCI - * address and our read/write implementation use that to drive the - * access registers. If something outside of PCI is ioremap'd, we - * fallback to the default. - */ -static inline void __iomem * -__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype) -{ - if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff)) - return __arm_ioremap(addr, size, mtype); - - return (void __iomem *)addr; -} - -static inline void -__ixp4xx_iounmap(void __iomem *addr) -{ - if ((__force u32)addr >= VMALLOC_START) - __iounmap(addr); -} - -#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f) -#define __arch_iounmap(a) __ixp4xx_iounmap(a) - -#define writeb(v, p) __ixp4xx_writeb(v, p) -#define writew(v, p) __ixp4xx_writew(v, p) -#define writel(v, p) __ixp4xx_writel(v, p) - -#define writesb(p, v, l) __ixp4xx_writesb(p, v, l) -#define writesw(p, v, l) __ixp4xx_writesw(p, v, l) -#define writesl(p, v, l) __ixp4xx_writesl(p, v, l) - -#define readb(p) __ixp4xx_readb(p) -#define readw(p) __ixp4xx_readw(p) -#define readl(p) __ixp4xx_readl(p) - -#define readsb(p, v, l) __ixp4xx_readsb(p, v, l) -#define readsw(p, v, l) __ixp4xx_readsw(p, v, l) -#define readsl(p, v, l) __ixp4xx_readsl(p, v, l) - -static inline void -__ixp4xx_writeb(u8 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { - __raw_writeb(value, addr); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void -__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) -{ - while (count--) - writeb(*vaddr++, bus_addr); -} - -static inline void -__ixp4xx_writew(u16 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { - __raw_writew(value, addr); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void -__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) -{ - while (count--) - writew(*vaddr++, bus_addr); -} - -static inline void -__ixp4xx_writel(u32 value, volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - if (addr >= VMALLOC_START) { - __raw_writel(value, p); - return; - } - - ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); -} - -static inline void -__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) -{ - while (count--) - writel(*vaddr++, bus_addr); -} - -static inline unsigned char -__ixp4xx_readb(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) - return __raw_readb(addr); - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -static inline void -__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readb(bus_addr); -} - -static inline unsigned short -__ixp4xx_readw(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) - return __raw_readw(addr); - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -static inline void -__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readw(bus_addr); -} - -static inline unsigned long -__ixp4xx_readl(const volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - u32 data; - - if (addr >= VMALLOC_START) - return __raw_readl(p); - - if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) - return 0xffffffff; - - return data; -} - -static inline void -__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = readl(bus_addr); -} - - -/* - * We can use the built-in functions b/c they end up calling writeb/readb - */ -#define memset_io(c,v,l) _memset_io((c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) - -#endif - -#ifndef CONFIG_PCI - -#define __io(v) v - -#else - -/* - * IXP4xx does not have a transparent cpu -> PCI I/O translation - * window. Instead, it has a set of registers that must be tweaked - * with the proper byte lanes, command types, and address for the - * transaction. This means that we need to override the default - * I/O functions. - */ -#define outb(p, v) __ixp4xx_outb(p, v) -#define outw(p, v) __ixp4xx_outw(p, v) -#define outl(p, v) __ixp4xx_outl(p, v) - -#define outsb(p, v, l) __ixp4xx_outsb(p, v, l) -#define outsw(p, v, l) __ixp4xx_outsw(p, v, l) -#define outsl(p, v, l) __ixp4xx_outsl(p, v, l) - -#define inb(p) __ixp4xx_inb(p) -#define inw(p) __ixp4xx_inw(p) -#define inl(p) __ixp4xx_inl(p) - -#define insb(p, v, l) __ixp4xx_insb(p, v, l) -#define insw(p, v, l) __ixp4xx_insw(p, v, l) -#define insl(p, v, l) __ixp4xx_insl(p, v, l) - - -static inline void -__ixp4xx_outb(u8 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -static inline void -__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count) -{ - while (count--) - outb(*vaddr++, io_addr); -} - -static inline void -__ixp4xx_outw(u16 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -static inline void -__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count) -{ - while (count--) - outw(cpu_to_le16(*vaddr++), io_addr); -} - -static inline void -__ixp4xx_outl(u32 value, u32 addr) -{ - ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); -} - -static inline void -__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count) -{ - while (count--) - outl(*vaddr++, io_addr); -} - -static inline u8 -__ixp4xx_inb(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -static inline void -__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = inb(io_addr); -} - -static inline u16 -__ixp4xx_inw(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -static inline void -__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = le16_to_cpu(inw(io_addr)); -} - -static inline u32 -__ixp4xx_inl(u32 addr) -{ - u32 data; - if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) - return 0xffffffff; - - return data; -} - -static inline void -__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) -{ - while (count--) - *vaddr++ = inl(io_addr); -} - -#define PIO_OFFSET 0x10000UL -#define PIO_MASK 0x0ffffUL - -#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ - ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) -static inline unsigned int -__ixp4xx_ioread8(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inb(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return (unsigned int)__raw_readb(port); -#else - return (unsigned int)__ixp4xx_readb(addr); -#endif -} - -static inline void -__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsb(addr, vaddr, count); -#else - __ixp4xx_readsb(addr, vaddr, count); -#endif -} - -static inline unsigned int -__ixp4xx_ioread16(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inw(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le16_to_cpu(__raw_readw((u32)port)); -#else - return (unsigned int)__ixp4xx_readw(addr); -#endif -} - -static inline void -__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsw(addr, vaddr, count); -#else - __ixp4xx_readsw(addr, vaddr, count); -#endif -} - -static inline unsigned int -__ixp4xx_ioread32(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inl(port & PIO_MASK); - else { -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu((__force __le32)__raw_readl(addr)); -#else - return (unsigned int)__ixp4xx_readl(addr); -#endif - } -} - -static inline void -__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_insl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsl(addr, vaddr, count); -#else - __ixp4xx_readsl(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite8(u8 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outb(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writeb(value, port); -#else - __ixp4xx_writeb(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesb(addr, vaddr, count); -#else - __ixp4xx_writesb(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite16(u16 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outw(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writew(cpu_to_le16(value), addr); -#else - __ixp4xx_writew(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesw(addr, vaddr, count); -#else - __ixp4xx_writesw(addr, vaddr, count); -#endif -} - -static inline void -__ixp4xx_iowrite32(u32 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outl(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel((u32 __force)cpu_to_le32(value), addr); -#else - __ixp4xx_writel(value, addr); -#endif -} - -static inline void -__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - __ixp4xx_outsl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesl(addr, vaddr, count); -#else - __ixp4xx_writesl(addr, vaddr, count); -#endif -} - -#define ioread8(p) __ixp4xx_ioread8(p) -#define ioread16(p) __ixp4xx_ioread16(p) -#define ioread32(p) __ixp4xx_ioread32(p) - -#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c) -#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c) -#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c) - -#define iowrite8(v,p) __ixp4xx_iowrite8(v,p) -#define iowrite16(v,p) __ixp4xx_iowrite16(v,p) -#define iowrite32(v,p) __ixp4xx_iowrite32(v,p) - -#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c) -#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c) -#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c) - -#define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) -#define ioport_unmap(addr) -#endif // !CONFIG_PCI - -#endif // __ASM_ARM_ARCH_IO_H - diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h deleted file mode 100644 index 674af4a84147..000000000000 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/irqs.h - * - * IRQ definitions for IXP4XX based systems - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_IXP4XX_IRQS_H_ -#define _ARCH_IXP4XX_IRQS_H_ - - -#define IRQ_IXP4XX_NPEA 0 -#define IRQ_IXP4XX_NPEB 1 -#define IRQ_IXP4XX_NPEC 2 -#define IRQ_IXP4XX_QM1 3 -#define IRQ_IXP4XX_QM2 4 -#define IRQ_IXP4XX_TIMER1 5 -#define IRQ_IXP4XX_GPIO0 6 -#define IRQ_IXP4XX_GPIO1 7 -#define IRQ_IXP4XX_PCI_INT 8 -#define IRQ_IXP4XX_PCI_DMA1 9 -#define IRQ_IXP4XX_PCI_DMA2 10 -#define IRQ_IXP4XX_TIMER2 11 -#define IRQ_IXP4XX_USB 12 -#define IRQ_IXP4XX_UART2 13 -#define IRQ_IXP4XX_TIMESTAMP 14 -#define IRQ_IXP4XX_UART1 15 -#define IRQ_IXP4XX_WDOG 16 -#define IRQ_IXP4XX_AHB_PMU 17 -#define IRQ_IXP4XX_XSCALE_PMU 18 -#define IRQ_IXP4XX_GPIO2 19 -#define IRQ_IXP4XX_GPIO3 20 -#define IRQ_IXP4XX_GPIO4 21 -#define IRQ_IXP4XX_GPIO5 22 -#define IRQ_IXP4XX_GPIO6 23 -#define IRQ_IXP4XX_GPIO7 24 -#define IRQ_IXP4XX_GPIO8 25 -#define IRQ_IXP4XX_GPIO9 26 -#define IRQ_IXP4XX_GPIO10 27 -#define IRQ_IXP4XX_GPIO11 28 -#define IRQ_IXP4XX_GPIO12 29 -#define IRQ_IXP4XX_SW_INT1 30 -#define IRQ_IXP4XX_SW_INT2 31 -#define IRQ_IXP4XX_USB_HOST 32 -#define IRQ_IXP4XX_I2C 33 -#define IRQ_IXP4XX_SSP 34 -#define IRQ_IXP4XX_TSYNC 35 -#define IRQ_IXP4XX_EAU_DONE 36 -#define IRQ_IXP4XX_SHA_DONE 37 -#define IRQ_IXP4XX_SWCP_PE 58 -#define IRQ_IXP4XX_QM_PE 60 -#define IRQ_IXP4XX_MCU_ECC 61 -#define IRQ_IXP4XX_EXP_PE 62 - -/* - * Only first 32 sources are valid if running on IXP42x systems - */ -#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X) -#define NR_IRQS 64 -#else -#define NR_IRQS 32 -#endif - -#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) - -/* - * IXDP425 board IRQs - */ -#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * Gateworks Avila board IRQs - */ -#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8 - - -/* - * PrPMC1100 Board IRQs - */ -#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * ADI Coyote Board IRQs - */ -#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6 -#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 -#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -/* - * NSLU2 board IRQs - */ -#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 - -/* - * NAS100D board IRQs - */ -#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 - -/* - * D-Link DSM-G600 RevA board IRQs - */ -#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 -#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 - -/* - * Freecom FSG-3 Board IRQs - */ -#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 -#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 -#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 - -#endif diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h deleted file mode 100644 index d0a1dcb48d53..000000000000 --- a/include/asm-arm/arch-ixp4xx/ixdp425.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/ixdp425.h - * - * IXDP425 platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define IXDP425_SDA_PIN 7 -#define IXDP425_SCL_PIN 6 - -/* - * IXDP425 PCI IRQs - */ -#define IXDP425_PCI_MAX_DEV 4 -#define IXDP425_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define IXDP425_PCI_INTA_PIN 11 -#define IXDP425_PCI_INTB_PIN 10 -#define IXDP425_PCI_INTC_PIN 9 -#define IXDP425_PCI_INTD_PIN 8 - -/* NAND Flash pins */ -#define IXDP425_NAND_NCE_PIN 12 - -#define IXDP425_NAND_CMD_BYTE 0x01 -#define IXDP425_NAND_ADDR_BYTE 0x02 diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h deleted file mode 100644 index 68aca8554f5a..000000000000 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ /dev/null @@ -1,638 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/ixp4xx-regs.h - * - * Register definitions for IXP4xx chipset. This file contains - * register location and bit definitions only. Platform specific - * definitions and helper function declarations are in platform.h - * and machine-name.h. - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ASM_ARM_IXP4XX_H_ -#define _ASM_ARM_IXP4XX_H_ - -/* - * IXP4xx Linux Memory Map: - * - * Phy Size Virt Description - * ========================================================================= - * - * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM - * - * 0x48000000 0x04000000 ioremap'd PCI Memory Space - * - * 0x50000000 0x10000000 ioremap'd EXP BUS - * - * 0x6000000 0x00004000 ioremap'd QMgr - * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG - * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG - * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals - */ - -/* - * Queue Manager - */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) - -/* - * Expansion BUS Configuration registers - */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT (0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) - -/* - * PCI Config registers - */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT (0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) - -/* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. - */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) - -#define IXP4XX_EXP_CS0_OFFSET 0x00 -#define IXP4XX_EXP_CS1_OFFSET 0x04 -#define IXP4XX_EXP_CS2_OFFSET 0x08 -#define IXP4XX_EXP_CS3_OFFSET 0x0C -#define IXP4XX_EXP_CS4_OFFSET 0x10 -#define IXP4XX_EXP_CS5_OFFSET 0x14 -#define IXP4XX_EXP_CS6_OFFSET 0x18 -#define IXP4XX_EXP_CS7_OFFSET 0x1C -#define IXP4XX_EXP_CFG0_OFFSET 0x20 -#define IXP4XX_EXP_CFG1_OFFSET 0x24 -#define IXP4XX_EXP_CFG2_OFFSET 0x28 -#define IXP4XX_EXP_CFG3_OFFSET 0x2C - -/* - * Expansion Bus Controller registers. - */ -#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x))) - -#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET) -#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET) -#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) -#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET) -#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET) -#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET) -#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET) -#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET) - -#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) -#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) -#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) -#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET) - - -/* - * Peripheral Space Register Region Base Addresses - */ -#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) -#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) -#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) -#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) -#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) -#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) -#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) -#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) -#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) -#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) -#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) -#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) -#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) -#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) -#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) -#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) -#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) -#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) - - -#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) -#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) -#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) -#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) -#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) -#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_NPEA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000) -#define IXP4XX_NPEB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000) -#define IXP4XX_NPEC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000) -#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) -#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) -#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) -#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) -#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) -#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) -#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) -#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) -#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) - -/* - * Constants to make it easy to access Interrupt Controller registers - */ -#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */ -#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */ -#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */ -#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */ -#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */ -#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */ -#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ -#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ - -/* - * IXP465-only - */ -#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */ -#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */ -#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */ -#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */ -#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */ -#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */ - - -/* - * Interrupt Controller Register Definitions. - */ - -#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x))) - -#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET) -#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET) -#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET) -#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET) -#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET) -#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET) -#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) -#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET) -#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET) -#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET) -#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET) -#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET) -#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET) -#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET) - -/* - * Constants to make it easy to access GPIO registers - */ -#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00 -#define IXP4XX_GPIO_GPOER_OFFSET 0x04 -#define IXP4XX_GPIO_GPINR_OFFSET 0x08 -#define IXP4XX_GPIO_GPISR_OFFSET 0x0C -#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10 -#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14 -#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18 -#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C - -/* - * GPIO Register Definitions. - * [Only perform 32bit reads/writes] - */ -#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x))) - -#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET) -#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET) -#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET) -#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET) -#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET) -#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET) -#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET) -#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET) - -/* - * GPIO register bit definitions - */ - -/* Interrupt styles - */ -#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0 -#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1 -#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2 -#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3 -#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4 - -/* - * Mask used to clear interrupt styles - */ -#define IXP4XX_GPIO_STYLE_CLEAR 0x7 -#define IXP4XX_GPIO_STYLE_SIZE 3 - -/* - * Constants to make it easy to access Timer Control/Status registers - */ -#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ -#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ -#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ -#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ -#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ -#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ -#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ -#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ -#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ - -/* - * Operating System Timer Register Definitions. - */ - -#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x))) - -#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET) -#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET) -#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET) -#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET) -#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET) -#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET) -#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET) -#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET) -#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET) - -/* - * Timer register values and bit definitions - */ -#define IXP4XX_OST_ENABLE 0x00000001 -#define IXP4XX_OST_ONE_SHOT 0x00000002 -/* Low order bits of reload value ignored */ -#define IXP4XX_OST_RELOAD_MASK 0x00000003 -#define IXP4XX_OST_DISABLED 0x00000000 -#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 -#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 -#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 -#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 -#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 - -#define IXP4XX_WDT_KEY 0x0000482E - -#define IXP4XX_WDT_RESET_ENABLE 0x00000001 -#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 -#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 - - -/* - * Constants to make it easy to access PCI Control/Status registers - */ -#define PCI_NP_AD_OFFSET 0x00 -#define PCI_NP_CBE_OFFSET 0x04 -#define PCI_NP_WDATA_OFFSET 0x08 -#define PCI_NP_RDATA_OFFSET 0x0c -#define PCI_CRP_AD_CBE_OFFSET 0x10 -#define PCI_CRP_WDATA_OFFSET 0x14 -#define PCI_CRP_RDATA_OFFSET 0x18 -#define PCI_CSR_OFFSET 0x1c -#define PCI_ISR_OFFSET 0x20 -#define PCI_INTEN_OFFSET 0x24 -#define PCI_DMACTRL_OFFSET 0x28 -#define PCI_AHBMEMBASE_OFFSET 0x2c -#define PCI_AHBIOBASE_OFFSET 0x30 -#define PCI_PCIMEMBASE_OFFSET 0x34 -#define PCI_AHBDOORBELL_OFFSET 0x38 -#define PCI_PCIDOORBELL_OFFSET 0x3C -#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 -#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 -#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 -#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C -#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 -#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 - -/* - * PCI Control/Status Registers - */ -#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x))) - -#define PCI_NP_AD IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET) -#define PCI_NP_CBE IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET) -#define PCI_NP_WDATA IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET) -#define PCI_NP_RDATA IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET) -#define PCI_CRP_AD_CBE IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) -#define PCI_CRP_WDATA IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET) -#define PCI_CRP_RDATA IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET) -#define PCI_CSR IXP4XX_PCI_CSR(PCI_CSR_OFFSET) -#define PCI_ISR IXP4XX_PCI_CSR(PCI_ISR_OFFSET) -#define PCI_INTEN IXP4XX_PCI_CSR(PCI_INTEN_OFFSET) -#define PCI_DMACTRL IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET) -#define PCI_AHBMEMBASE IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET) -#define PCI_AHBIOBASE IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET) -#define PCI_PCIMEMBASE IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET) -#define PCI_AHBDOORBELL IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET) -#define PCI_PCIDOORBELL IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET) -#define PCI_ATPDMA0_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) -#define PCI_ATPDMA0_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) -#define PCI_ATPDMA0_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) -#define PCI_ATPDMA1_AHBADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) -#define PCI_ATPDMA1_PCIADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) -#define PCI_ATPDMA1_LENADDR IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) - -/* - * PCI register values and bit definitions - */ - -/* CSR bit definitions */ -#define PCI_CSR_HOST 0x00000001 -#define PCI_CSR_ARBEN 0x00000002 -#define PCI_CSR_ADS 0x00000004 -#define PCI_CSR_PDS 0x00000008 -#define PCI_CSR_ABE 0x00000010 -#define PCI_CSR_DBT 0x00000020 -#define PCI_CSR_ASE 0x00000100 -#define PCI_CSR_IC 0x00008000 - -/* ISR (Interrupt status) Register bit definitions */ -#define PCI_ISR_PSE 0x00000001 -#define PCI_ISR_PFE 0x00000002 -#define PCI_ISR_PPE 0x00000004 -#define PCI_ISR_AHBE 0x00000008 -#define PCI_ISR_APDC 0x00000010 -#define PCI_ISR_PADC 0x00000020 -#define PCI_ISR_ADB 0x00000040 -#define PCI_ISR_PDB 0x00000080 - -/* INTEN (Interrupt Enable) Register bit definitions */ -#define PCI_INTEN_PSE 0x00000001 -#define PCI_INTEN_PFE 0x00000002 -#define PCI_INTEN_PPE 0x00000004 -#define PCI_INTEN_AHBE 0x00000008 -#define PCI_INTEN_APDC 0x00000010 -#define PCI_INTEN_PADC 0x00000020 -#define PCI_INTEN_ADB 0x00000040 -#define PCI_INTEN_PDB 0x00000080 - -/* - * Shift value for byte enable on NP cmd/byte enable register - */ -#define IXP4XX_PCI_NP_CBE_BESL 4 - -/* - * PCI commands supported by NP access unit - */ -#define NP_CMD_IOREAD 0x2 -#define NP_CMD_IOWRITE 0x3 -#define NP_CMD_CONFIGREAD 0xa -#define NP_CMD_CONFIGWRITE 0xb -#define NP_CMD_MEMREAD 0x6 -#define NP_CMD_MEMWRITE 0x7 - -/* - * Constants for CRP access into local config space - */ -#define CRP_AD_CBE_BESL 20 -#define CRP_AD_CBE_WRITE 0x00010000 - - -/* - * USB Device Controller - * - * These are used by the USB gadget driver, so they don't follow the - * IXP4XX_ naming convetions. - * - */ -# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x))) - -/* UDC Undocumented - Reserved1 */ -#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004) -/* UDC Undocumented - Reserved2 */ -#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008) -/* UDC Undocumented - Reserved3 */ -#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C) -/* UDC Control Register */ -#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000) -/* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010) -/* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014) -/* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018) -/* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C) -/* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020) -/* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024) -/* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028) -/* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C) -/* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030) -/* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034) -/* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038) -/* UDC Endpoint 11 (IN) Control/Status Register */ -#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C) -/* UDC Endpoint 12 (OUT) Control/Status Register */ -#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040) -/* UDC Endpoint 13 (IN) Control/Status Register */ -#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044) -/* UDC Endpoint 14 (OUT) Control/Status Register */ -#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048) -/* UDC Endpoint 15 (Interrupt) Control/Status Register */ -#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C) -/* UDC Frame Number Register High */ -#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060) -/* UDC Frame Number Register Low */ -#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064) -/* UDC Byte Count Reg 2 */ -#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068) -/* UDC Byte Count Reg 4 */ -#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c) -/* UDC Byte Count Reg 7 */ -#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070) -/* UDC Byte Count Reg 9 */ -#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074) -/* UDC Byte Count Reg 12 */ -#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078) -/* UDC Byte Count Reg 14 */ -#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c) -/* UDC Endpoint 0 Data Register */ -#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080) -/* UDC Endpoint 1 Data Register */ -#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100) -/* UDC Endpoint 2 Data Register */ -#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180) -/* UDC Endpoint 3 Data Register */ -#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200) -/* UDC Endpoint 4 Data Register */ -#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400) -/* UDC Endpoint 5 Data Register */ -#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0) -/* UDC Endpoint 6 Data Register */ -#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600) -/* UDC Endpoint 7 Data Register */ -#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680) -/* UDC Endpoint 8 Data Register */ -#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700) -/* UDC Endpoint 9 Data Register */ -#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900) -/* UDC Endpoint 10 Data Register */ -#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0) -/* UDC Endpoint 11 Data Register */ -#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00) -/* UDC Endpoint 12 Data Register */ -#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80) -/* UDC Endpoint 13 Data Register */ -#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00) -/* UDC Endpoint 14 Data Register */ -#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00) -/* UDC Endpoint 15 Data Register */ -#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0) -/* UDC Interrupt Control Register 0 */ -#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050) -/* UDC Interrupt Control Register 1 */ -#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054) -/* UDC Status Interrupt Register 0 */ -#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058) -/* UDC Status Interrupt Register 1 */ -#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C) - -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* "fuse" bits of IXP_EXP_CFG2 */ -#define IXP4XX_FEATURE_RCOMP (1 << 0) -#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) -#define IXP4XX_FEATURE_HASH (1 << 2) -#define IXP4XX_FEATURE_AES (1 << 3) -#define IXP4XX_FEATURE_DES (1 << 4) -#define IXP4XX_FEATURE_HDLC (1 << 5) -#define IXP4XX_FEATURE_AAL (1 << 6) -#define IXP4XX_FEATURE_HSS (1 << 7) -#define IXP4XX_FEATURE_UTOPIA (1 << 8) -#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) -#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) -#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) -#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) -#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) -#define IXP4XX_FEATURE_PCI (1 << 14) -#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) -#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) -#define IXP4XX_FEATURE_USB_HOST (1 << 18) -#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) -#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) -#define IXP4XX_FEATURE_RSA (1 << 21) -#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) -#define IXP4XX_FEATURE_RESERVED (0xFF << 24) - -#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \ - IXP4XX_FEATURE_USB_HOST | \ - IXP4XX_FEATURE_NPEA_ETH | \ - IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ - IXP4XX_FEATURE_RSA | \ - IXP4XX_FEATURE_XSCALE_MAX_FREQ) - -#endif diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h deleted file mode 100644 index af9667b57ab3..000000000000 --- a/include/asm-arm/arch-ixp4xx/memory.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/memory.h - * - * Copyright (c) 2001-2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) - -void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - ixp4xx_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (SZ_64M - 1) - -#endif - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * These are dummies for now. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h deleted file mode 100644 index ecb12d66399c..000000000000 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nas100d.h - * - * NAS100D platform specific definitions - * - * Copyright (c) 2005 Tower Technologies - * - * Author: Alessandro Zummo - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define NAS100D_SDA_PIN 5 -#define NAS100D_SCL_PIN 6 - -/* - * NAS100D PCI IRQs - */ -#define NAS100D_PCI_MAX_DEV 3 -#define NAS100D_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NAS100D_PCI_INTA_PIN 11 -#define NAS100D_PCI_INTB_PIN 10 -#define NAS100D_PCI_INTC_PIN 9 -#define NAS100D_PCI_INTD_PIN 8 -#define NAS100D_PCI_INTE_PIN 7 - -/* Buttons */ - -#define NAS100D_PB_GPIO 14 /* power button */ -#define NAS100D_RB_GPIO 4 /* reset button */ - -/* Power control */ - -#define NAS100D_PO_GPIO 12 /* power off */ - -/* LEDs */ - -#define NAS100D_LED_WLAN_GPIO 0 -#define NAS100D_LED_DISK_GPIO 3 -#define NAS100D_LED_PWR_GPIO 15 diff --git a/include/asm-arm/arch-ixp4xx/npe.h b/include/asm-arm/arch-ixp4xx/npe.h deleted file mode 100644 index 37d0511689dc..000000000000 --- a/include/asm-arm/arch-ixp4xx/npe.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef __IXP4XX_NPE_H -#define __IXP4XX_NPE_H - -#include - -extern const char *npe_names[]; - -struct npe_regs { - u32 exec_addr, exec_data, exec_status_cmd, exec_count; - u32 action_points[4]; - u32 watchpoint_fifo, watch_count; - u32 profile_count; - u32 messaging_status, messaging_control; - u32 mailbox_status, /*messaging_*/ in_out_fifo; -}; - -struct npe { - struct resource *mem_res; - struct npe_regs __iomem *regs; - u32 regs_phys; - int id; - int valid; -}; - - -static inline const char *npe_name(struct npe *npe) -{ - return npe_names[npe->id]; -} - -int npe_running(struct npe *npe); -int npe_send_message(struct npe *npe, const void *msg, const char *what); -int npe_recv_message(struct npe *npe, void *msg, const char *what); -int npe_send_recv_message(struct npe *npe, void *msg, const char *what); -int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); -struct npe *npe_request(int id); -void npe_release(struct npe *npe); - -#endif /* __IXP4XX_NPE_H */ diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h deleted file mode 100644 index fa895f44e431..000000000000 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -#define NSLU2_PCI_INTD_PIN 8 - -/* NSLU2 Timer */ -#define NSLU2_FREQ 66000000 - -/* Buttons */ - -#define NSLU2_PB_GPIO 5 /* power button */ -#define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 /* reset button */ - -/* Buzzer */ - -#define NSLU2_GPIO_BUZZ 4 - -/* LEDs */ - -#define NSLU2_LED_RED_GPIO 0 -#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_DISK1_GPIO 3 -#define NSLU2_LED_DISK2_GPIO 2 diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h deleted file mode 100644 index b2af5154cef3..000000000000 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/platform.h - * - * Constants and functions that are useful to IXP4xx platform-specific code - * and device drivers. - * - * Copyright (C) 2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#ifndef __ASSEMBLY__ - -#include - -#ifndef __ARMEB__ -#define REG_OFFSET 0 -#else -#define REG_OFFSET 3 -#endif - -/* - * Expansion bus memory regions - */ -#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) - -/* - * The expansion bus on the IXP4xx can be configured for either 16 or - * 32MB windows and the CS offset for each region changes based on the - * current configuration. This means that we cannot simply hardcode - * each offset. ixp4xx_sys_init() looks at the expansion bus configuration - * as setup by the bootloader to determine our window size. - */ -extern unsigned long ixp4xx_exp_bus_size; - -#define IXP4XX_EXP_BUS_BASE(region)\ - (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) - -#define IXP4XX_EXP_BUS_END(region)\ - (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) - -/* Those macros can be used to adjust timing and configure - * other features for each region. - */ - -#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) -#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) -#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) -#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) -#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) -#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) -#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) - -#define IXP4XX_EXP_BUS_CS_EN (1L << 31) -#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) -#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) -#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) -#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) -#define IXP4XX_EXP_BUS_WR_EN (1L << 1) -#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) - -#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 -#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 -#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 - -#define IXP4XX_FLASH_WRITABLE (0x2) -#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) -#define IXP4XX_FLASH_WRITE (0xbcd23c42) - -/* - * Clock Speed Definitions. - */ -#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ -#define IXP4XX_UART_XTAL 14745600 - -/* - * This structure provide a means for the board setup code - * to give information to th pata_ixp4xx driver. It is - * passed as platform_data. - */ -struct ixp4xx_pata_data { - volatile u32 *cs0_cfg; - volatile u32 *cs1_cfg; - unsigned long cs0_bits; - unsigned long cs1_bits; - void __iomem *cs0; - void __iomem *cs1; -}; - -struct sys_timer; - -#define IXP4XX_ETH_NPEA 0x00 -#define IXP4XX_ETH_NPEB 0x10 -#define IXP4XX_ETH_NPEC 0x20 - -/* Information about built-in Ethernet MAC interfaces */ -struct eth_plat_info { - u8 phy; /* MII PHY ID, 0 - 31 */ - u8 rxq; /* configurable, currently 0 - 31 only */ - u8 txreadyq; - u8 hwaddr[6]; -}; - -/* Information about built-in HSS (synchronous serial) interfaces */ -struct hss_plat_info { - int (*set_clock)(int port, unsigned int clock_type); - int (*open)(int port, void *pdev, - void (*set_carrier_cb)(void *pdev, int carrier)); - void (*close)(int port, void *pdev); - u8 txreadyq; -}; - -/* - * Frequency of clock used for primary clocksource - */ -extern unsigned long ixp4xx_timer_freq; - -/* - * Functions used by platform-level setup code - */ -extern void ixp4xx_map_io(void); -extern void ixp4xx_init_irq(void); -extern void ixp4xx_sys_init(void); -extern void ixp4xx_timer_init(void); -extern struct sys_timer ixp4xx_timer; -extern void ixp4xx_pci_preinit(void); -struct pci_sys_data; -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - -/* - * GPIO-functions - */ -/* - * The following converted to the real HW bits the gpio_line_config - */ -/* GPIO pin types */ -#define IXP4XX_GPIO_OUT 0x1 -#define IXP4XX_GPIO_IN 0x2 - -/* GPIO signal types */ -#define IXP4XX_GPIO_LOW 0 -#define IXP4XX_GPIO_HIGH 1 - -/* GPIO Clocks */ -#define IXP4XX_GPIO_CLK_0 14 -#define IXP4XX_GPIO_CLK_1 15 - -static inline void gpio_line_config(u8 line, u32 direction) -{ - if (direction == IXP4XX_GPIO_IN) - *IXP4XX_GPIO_GPOER |= (1 << line); - else - *IXP4XX_GPIO_GPOER &= ~(1 << line); -} - -static inline void gpio_line_get(u8 line, int *value) -{ - *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; -} - -static inline void gpio_line_set(u8 line, int value) -{ - if (value == IXP4XX_GPIO_HIGH) - *IXP4XX_GPIO_GPOUTR |= (1 << line); - else if (value == IXP4XX_GPIO_LOW) - *IXP4XX_GPIO_GPOUTR &= ~(1 << line); -} - -#endif // __ASSEMBLY__ - diff --git a/include/asm-arm/arch-ixp4xx/prpmc1100.h b/include/asm-arm/arch-ixp4xx/prpmc1100.h deleted file mode 100644 index 100855feafdd..000000000000 --- a/include/asm-arm/arch-ixp4xx/prpmc1100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/prpmc1100.h - * - * Motorolla PrPMC1100 platform specific definitions - * - * Author: Deepak Saxena - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include " -#endif - -#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define PRPMC1100_PCI_MIN_DEVID 10 -#define PRPMC1100_PCI_MAX_DEVID 16 -#define PRPMC1100_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define PRPMC1100_PCI_INTA_PIN 11 -#define PRPMC1100_PCI_INTB_PIN 10 -#define PRPMC1100_PCI_INTC_PIN 9 -#define PRPMC1100_PCI_INTD_PIN 8 - - diff --git a/include/asm-arm/arch-ixp4xx/qmgr.h b/include/asm-arm/arch-ixp4xx/qmgr.h deleted file mode 100644 index 1e52b95cede5..000000000000 --- a/include/asm-arm/arch-ixp4xx/qmgr.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright (C) 2007 Krzysztof Halasa - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#ifndef IXP4XX_QMGR_H -#define IXP4XX_QMGR_H - -#include -#include - -#define HALF_QUEUES 32 -#define QUEUES 64 /* only 32 lower queues currently supported */ -#define MAX_QUEUE_LENGTH 4 /* in dwords */ - -#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ -#define QUEUE_STAT1_NEARLY_EMPTY 2 -#define QUEUE_STAT1_NEARLY_FULL 4 -#define QUEUE_STAT1_FULL 8 -#define QUEUE_STAT2_UNDERFLOW 1 -#define QUEUE_STAT2_OVERFLOW 2 - -#define QUEUE_WATERMARK_0_ENTRIES 0 -#define QUEUE_WATERMARK_1_ENTRY 1 -#define QUEUE_WATERMARK_2_ENTRIES 2 -#define QUEUE_WATERMARK_4_ENTRIES 3 -#define QUEUE_WATERMARK_8_ENTRIES 4 -#define QUEUE_WATERMARK_16_ENTRIES 5 -#define QUEUE_WATERMARK_32_ENTRIES 6 -#define QUEUE_WATERMARK_64_ENTRIES 7 - -/* queue interrupt request conditions */ -#define QUEUE_IRQ_SRC_EMPTY 0 -#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 -#define QUEUE_IRQ_SRC_NEARLY_FULL 2 -#define QUEUE_IRQ_SRC_FULL 3 -#define QUEUE_IRQ_SRC_NOT_EMPTY 4 -#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 -#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 -#define QUEUE_IRQ_SRC_NOT_FULL 7 - -struct qmgr_regs { - u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ - u32 stat1[4]; /* 0x400 - 0x40F */ - u32 stat2[2]; /* 0x410 - 0x417 */ - u32 statne_h; /* 0x418 - queue nearly empty */ - u32 statf_h; /* 0x41C - queue full */ - u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ - u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ - u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ - u32 reserved[1776]; - u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ -}; - -void qmgr_set_irq(unsigned int queue, int src, - void (*handler)(void *pdev), void *pdev); -void qmgr_enable_irq(unsigned int queue); -void qmgr_disable_irq(unsigned int queue); - -/* request_ and release_queue() must be called from non-IRQ context */ -int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, - unsigned int nearly_empty_watermark, - unsigned int nearly_full_watermark); -void qmgr_release_queue(unsigned int queue); - - -static inline void qmgr_put_entry(unsigned int queue, u32 val) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - __raw_writel(val, &qmgr_regs->acc[queue][0]); -} - -static inline u32 qmgr_get_entry(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return __raw_readl(&qmgr_regs->acc[queue][0]); -} - -static inline int qmgr_get_stat1(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) - >> ((queue & 7) << 2)) & 0xF; -} - -static inline int qmgr_get_stat2(unsigned int queue) -{ - extern struct qmgr_regs __iomem *qmgr_regs; - return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) - >> ((queue & 0xF) << 1)) & 0x3; -} - -static inline int qmgr_stat_empty(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY); -} - -static inline int qmgr_stat_nearly_empty(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY); -} - -static inline int qmgr_stat_nearly_full(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL); -} - -static inline int qmgr_stat_full(unsigned int queue) -{ - return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL); -} - -static inline int qmgr_stat_underflow(unsigned int queue) -{ - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW); -} - -static inline int qmgr_stat_overflow(unsigned int queue) -{ - return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW); -} - -#endif diff --git a/include/asm-arm/arch-ixp4xx/system.h b/include/asm-arm/arch-ixp4xx/system.h deleted file mode 100644 index f11b92262a07..000000000000 --- a/include/asm-arm/arch-ixp4xx/system.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/system.h - * - * Copyright (C) 2002 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -static inline void arch_idle(void) -{ -#if 0 - if (!hlt_counter) - cpu_do_idle(0); -#endif -} - - -static inline void arch_reset(char mode) -{ - if ( 1 && mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - - /* set the "key" register to enable access to - * "timer" and "enable" registers - */ - *IXP4XX_OSWK = IXP4XX_WDT_KEY; - - /* write 0 to the timer register for an immediate reset */ - *IXP4XX_OSWT = 0; - - *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; - } -} - diff --git a/include/asm-arm/arch-ixp4xx/timex.h b/include/asm-arm/arch-ixp4xx/timex.h deleted file mode 100644 index c2559e28cbcb..000000000000 --- a/include/asm-arm/arch-ixp4xx/timex.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/timex.h - * - */ - -#include - -/* - * We use IXP425 General purpose timer for our timer needs, it runs at - * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the - * timer register ignores the bottom 2 bits of the LATCH value. - */ -#define FREQ 66666666 -#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) - diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h deleted file mode 100644 index dbdec36ff0d1..000000000000 --- a/include/asm-arm/arch-ixp4xx/udc.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/udc.h - * - */ -#include - -extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); - diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h deleted file mode 100644 index 34ef48fe327e..000000000000 --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/uncompress.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _ARCH_UNCOMPRESS_H_ -#define _ARCH_UNCOMPRESS_H_ - -#include "ixp4xx-regs.h" -#include -#include - -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) - -static volatile u32* uart_base; - -static inline void putc(int c) -{ - /* Check THRE and TEMT bits before we transmit the character. - */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - - *uart_base = c; -} - -static void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - /* - * Some boards are using UART2 as console - */ - if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; -} - -/* - * arch_id is a variable in decompress_kernel() - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-ixp4xx/vmalloc.h b/include/asm-arm/arch-ixp4xx/vmalloc.h deleted file mode 100644 index 050d46e6b126..000000000000 --- a/include/asm-arm/arch-ixp4xx/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * linux/include/asm-arm/arch-ixp4xx/vmalloc.h - */ -#define VMALLOC_END (0xFF000000) - diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S deleted file mode 100644 index f55fb8ad9ee4..000000000000 --- a/include/asm-arm/arch-kirkwood/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/include/asm-arm/arch-kirkwood/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S deleted file mode 100644 index fc6a43d9355c..000000000000 --- a/include/asm-arm/arch-kirkwood/entry-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Kirkwood platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - bne 1001f - - @ if no low interrupts set, check high interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF] - mov \irqnr, #63 - ands \irqstat, \irqstat, \tmp - - @ find first active interrupt source -1001: clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h deleted file mode 100644 index e695719771a5..000000000000 --- a/include/asm-arm/arch-kirkwood/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "kirkwood.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - -#endif diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h deleted file mode 100644 index 0ef6e95f5d5b..000000000000 --- a/include/asm-arm/arch-kirkwood/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "kirkwood.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) - + KIRKWOOD_PCIE_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h deleted file mode 100644 index 2e7b5da6335c..000000000000 --- a/include/asm-arm/arch-kirkwood/irqs.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/irqs.h - * - * IRQ definitions for Marvell Kirkwood SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "kirkwood.h" /* need GPIO_MAX */ - -/* - * Low Interrupt Controller - */ -#define IRQ_KIRKWOOD_HIGH_SUM 0 -#define IRQ_KIRKWOOD_BRIDGE 1 -#define IRQ_KIRKWOOD_HOST2CPU 2 -#define IRQ_KIRKWOOD_CPU2HOST 3 -#define IRQ_KIRKWOOD_XOR_00 5 -#define IRQ_KIRKWOOD_XOR_01 6 -#define IRQ_KIRKWOOD_XOR_10 7 -#define IRQ_KIRKWOOD_XOR_11 8 -#define IRQ_KIRKWOOD_PCIE 9 -#define IRQ_KIRKWOOD_GE00_SUM 11 -#define IRQ_KIRKWOOD_GE01_SUM 15 -#define IRQ_KIRKWOOD_USB 19 -#define IRQ_KIRKWOOD_SATA 21 -#define IRQ_KIRKWOOD_CRYPTO 22 -#define IRQ_KIRKWOOD_SPI 23 -#define IRQ_KIRKWOOD_I2S 24 -#define IRQ_KIRKWOOD_TS_0 26 -#define IRQ_KIRKWOOD_SDIO 28 -#define IRQ_KIRKWOOD_TWSI 29 -#define IRQ_KIRKWOOD_AVB 30 -#define IRQ_KIRKWOOD_TDMI 31 - -/* - * High Interrupt Controller - */ -#define IRQ_KIRKWOOD_UART_0 33 -#define IRQ_KIRKWOOD_UART_1 34 -#define IRQ_KIRKWOOD_GPIO_LOW_0_7 35 -#define IRQ_KIRKWOOD_GPIO_LOW_8_15 36 -#define IRQ_KIRKWOOD_GPIO_LOW_16_23 37 -#define IRQ_KIRKWOOD_GPIO_LOW_24_31 38 -#define IRQ_KIRKWOOD_GPIO_HIGH_0_7 39 -#define IRQ_KIRKWOOD_GPIO_HIGH_8_15 40 -#define IRQ_KIRKWOOD_GPIO_HIGH_16_23 41 - -/* - * KIRKWOOD General Purpose Pins - */ -#define IRQ_KIRKWOOD_GPIO_START 64 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h deleted file mode 100644 index bb31b315c350..000000000000 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/kirkwood.h - * - * Generic definitions for Marvell Kirkwood SoC flavors: - * 88F6180, 88F6192 and 88F6281. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_KIRKWOOD_H -#define __ASM_ARCH_KIRKWOOD_H - -/* - * Marvell Kirkwood address maps. - * - * phys - * e0000000 PCIe Memory space - * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f3000000 NAND controller address window - * - * virt phys size - * fee00000 f1000000 1M on-chip peripheral registers - * fef00000 f2000000 1M PCIe I/O space - */ - -#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000 -#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K - * is the minimal window size - */ - -#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000 -#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000 -#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000 -#define KIRKWOOD_PCIE_IO_SIZE SZ_1M - -#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 -#define KIRKWOOD_REGS_VIRT_BASE 0xfee00000 -#define KIRKWOOD_REGS_SIZE SZ_1M - -#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 -#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M - -/* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Register Map - */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) - - -#define GPIO_MAX 50 - - -#endif diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h deleted file mode 100644 index e5108f408ce6..000000000000 --- a/include/asm-arm/arch-kirkwood/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h deleted file mode 100644 index 8dde7e379855..000000000000 --- a/include/asm-arm/arch-kirkwood/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h deleted file mode 100644 index 82122e134e3c..000000000000 --- a/include/asm-arm/arch-kirkwood/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define KIRKWOOD_TCLK 166666667 diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h deleted file mode 100644 index a9062b6d7680..000000000000 --- a/include/asm-arm/arch-kirkwood/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h deleted file mode 100644 index 41852c6e77f3..000000000000 --- a/include/asm-arm/arch-kirkwood/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-kirkwood/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-ks8695/debug-macro.S b/include/asm-arm/arch-ks8695/debug-macro.S deleted file mode 100644 index d2583ffffa95..000000000000 --- a/include/asm-arm/arch-ks8695/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/debug-macro.S - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Debug macros - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KS8695_UART_PA @ physical base address - ldrne \rx, =KS8695_UART_VA @ virtual base address - .endm - - .macro senduart, rd, rx - str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register - .endm - - .macro busyuart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTE @ Holding & Shift registers empty? - beq 1001b - .endm - - .macro waituart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTHRE @ Holding Register empty? - beq 1001b - .endm diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h deleted file mode 100644 index 7ad2c656e162..000000000000 --- a/include/asm-arm/arch-ks8695/devices.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/devices.h - * - * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DEVICES_H -#define __ASM_ARCH_DEVICES_H - -#include - - /* Ethernet */ -extern void __init ks8695_add_device_wan(void); -extern void __init ks8695_add_device_lan(void); -extern void __init ks8695_add_device_hpna(void); - - /* LEDs */ -extern short ks8695_leds_cpu; -extern short ks8695_leds_timer; -extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); - - /* PCI */ -#define KS8695_MODE_PCI 0 -#define KS8695_MODE_MINIPCI 1 -#define KS8695_MODE_CARDBUS 2 - -struct ks8695_pci_cfg { - short mode; - int (*map_irq)(struct pci_dev *, u8, u8); -}; -extern __init void ks8695_init_pci(struct ks8695_pci_cfg *); - -#endif diff --git a/include/asm-arm/arch-ks8695/dma.h b/include/asm-arm/arch-ks8695/dma.h deleted file mode 100644 index e5159ed42a4b..000000000000 --- a/include/asm-arm/arch-ks8695/dma.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/dma.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-ks8695/entry-macro.S b/include/asm-arm/arch-ks8695/entry-macro.S deleted file mode 100644 index 3993cfe67cfa..000000000000 --- a/include/asm-arm/arch-ks8695/entry-macro.S +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/entry-macro.S - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * Low-level IRQ helper macros for KS8695 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register - - teq \irqstat, #0 - beq 1001f - - mov \irqnr, #0 - - tst \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tst \irqstat, #0x0f - moveq \irqstat, \irqstat, lsr #4 - addeq \irqnr, \irqnr, #4 - tst \irqstat, #0x03 - moveq \irqstat, \irqstat, lsr #2 - addeq \irqnr, \irqnr, #2 - tst \irqstat, #0x01 - addeqs \irqnr, \irqnr, #1 -1001: - .endm diff --git a/include/asm-arm/arch-ks8695/gpio.h b/include/asm-arm/arch-ks8695/gpio.h deleted file mode 100644 index 65ceea28607b..000000000000 --- a/include/asm-arm/arch-ks8695/gpio.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/gpio.h - * - * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_GPIO_H_ -#define __ASM_ARCH_GPIO_H_ - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - - -/* - * Configure GPIO pin as external interrupt source. - */ -int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - -/* - * Configure the GPIO line as an input. - */ -int __init_or_module gpio_direction_input(unsigned int pin); - -/* - * Configure the GPIO line as an output, with default state. - */ -int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state); - -/* - * Set the state of an output GPIO line. - */ -void gpio_set_value(unsigned int pin, unsigned int state); - -/* - * Read the state of a GPIO line. - */ -int gpio_get_value(unsigned int pin); - -/* - * Map GPIO line to IRQ number. - */ -int gpio_to_irq(unsigned int pin); - -/* - * Map IRQ number to GPIO line. - */ -int irq_to_gpio(unsigned int irq); - - -#include - -static inline int gpio_request(unsigned int pin, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned int pin) -{ -} - -#endif diff --git a/include/asm-arm/arch-ks8695/hardware.h b/include/asm-arm/arch-ks8695/hardware.h deleted file mode 100644 index cb732bff3288..000000000000 --- a/include/asm-arm/arch-ks8695/hardware.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/hardware.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Memory Map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* - * Physical RAM address. - */ -#define KS8695_SDRAM_PA 0x00000000 - - -/* - * We map an entire MiB with the System Configuration Registers in even - * though only 64KiB is needed. This makes it easier for use with the - * head debug code as the initial MMU setup only deals in L1 sections. - */ -#define KS8695_IO_PA 0x03F00000 -#define KS8695_IO_VA 0xF0000000 -#define KS8695_IO_SIZE SZ_1M - -#define KS8695_PCIMEM_PA 0x60000000 -#define KS8695_PCIMEM_SIZE SZ_512M - -#define KS8695_PCIIO_PA 0x80000000 -#define KS8695_PCIIO_SIZE SZ_64K - - -/* - * PCI support - */ -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 - -#endif diff --git a/include/asm-arm/arch-ks8695/io.h b/include/asm-arm/arch-ks8695/io.h deleted file mode 100644 index 8edc4bd6aadf..000000000000 --- a/include/asm-arm/arch-ks8695/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/io.h - * - * Copyright (C) 2006 Andrew Victor - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-ks8695/irqs.h b/include/asm-arm/arch-ks8695/irqs.h deleted file mode 100644 index 8b1c4fe96a81..000000000000 --- a/include/asm-arm/arch-ks8695/irqs.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/arch-ks8695/irqs.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define NR_IRQS 32 - -/* - * IRQ definitions - */ -#define KS8695_IRQ_COMM_RX 0 -#define KS8695_IRQ_COMM_TX 1 -#define KS8695_IRQ_EXTERN0 2 -#define KS8695_IRQ_EXTERN1 3 -#define KS8695_IRQ_EXTERN2 4 -#define KS8695_IRQ_EXTERN3 5 -#define KS8695_IRQ_TIMER0 6 -#define KS8695_IRQ_TIMER1 7 -#define KS8695_IRQ_UART_TX 8 -#define KS8695_IRQ_UART_RX 9 -#define KS8695_IRQ_UART_LINE_STATUS 10 -#define KS8695_IRQ_UART_MODEM_STATUS 11 -#define KS8695_IRQ_LAN_RX_STOP 12 -#define KS8695_IRQ_LAN_TX_STOP 13 -#define KS8695_IRQ_LAN_RX_BUF 14 -#define KS8695_IRQ_LAN_TX_BUF 15 -#define KS8695_IRQ_LAN_RX_STATUS 16 -#define KS8695_IRQ_LAN_TX_STATUS 17 -#define KS8695_IRQ_HPNA_RX_STOP 18 -#define KS8695_IRQ_HPNA_TX_STOP 19 -#define KS8695_IRQ_HPNA_RX_BUF 20 -#define KS8695_IRQ_HPNA_TX_BUF 21 -#define KS8695_IRQ_HPNA_RX_STATUS 22 -#define KS8695_IRQ_HPNA_TX_STATUS 23 -#define KS8695_IRQ_BUS_ERROR 24 -#define KS8695_IRQ_WAN_RX_STOP 25 -#define KS8695_IRQ_WAN_TX_STOP 26 -#define KS8695_IRQ_WAN_RX_BUF 27 -#define KS8695_IRQ_WAN_TX_BUF 28 -#define KS8695_IRQ_WAN_RX_STATUS 29 -#define KS8695_IRQ_WAN_TX_STATUS 30 -#define KS8695_IRQ_WAN_LINK 31 - -#endif diff --git a/include/asm-arm/arch-ks8695/memory.h b/include/asm-arm/arch-ks8695/memory.h deleted file mode 100644 index 1b542f77977a..000000000000 --- a/include/asm-arm/arch-ks8695/memory.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/memory.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 Memory definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical SRAM offset. - */ -#define PHYS_OFFSET KS8695_SDRAM_PA - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PCI - -/* PCI mappings */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA) -#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET) - -/* Platform-bus mapping */ -extern struct bus_type platform_bus_type; -#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type) -#define __arch_dma_to_virt(dev, x) ({ is_lbus_device(dev) ? \ - __phys_to_virt(x) : __bus_to_virt(x); }) -#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ - (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) -#define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x)) - -#else - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - -#endif - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h deleted file mode 100644 index 6b95d77aea19..000000000000 --- a/include/asm-arm/arch-ks8695/regs-gpio.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-gpio.h - * - * Copyright (C) 2007 Andrew Victor - * - * KS8695 - GPIO control registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_GPIO_H -#define KS8695_GPIO_H - -#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600) -#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET) -#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET) - - -#define KS8695_IOPM (0x00) /* I/O Port Mode Register */ -#define KS8695_IOPC (0x04) /* I/O Port Control Register */ -#define KS8695_IOPD (0x08) /* I/O Port Data Register */ - - -/* Port Mode Register */ -#define IOPM_(x) (1 << (x)) /* Mode for GPIO Pin x */ - -/* Port Control Register */ -#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */ -#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */ -#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */ -#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */ -#define IOPC_IOEINT3_MODE(x) ((x) << 12) -#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */ -#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */ -#define IOPC_IOEINT2_MODE(x) ((x) << 8) -#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */ -#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */ -#define IOPC_IOEINT1_MODE(x) ((x) << 4) -#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */ -#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */ -#define IOPC_IOEINT0_MODE(x) ((x) << 0) - - /* Trigger Modes */ -#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */ -#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */ -#define IOPC_TM_RISING (2) /* Rising Edge Detection */ -#define IOPC_TM_FALLING (4) /* Falling Edge Detection */ -#define IOPC_TM_EDGE (6) /* Both Edge Detection */ - -/* Port Data Register */ -#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */ - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-hpna.h b/include/asm-arm/arch-ks8695/regs-hpna.h deleted file mode 100644 index 14091cdec103..000000000000 --- a/include/asm-arm/arch-ks8695/regs-hpna.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - HPNA Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_HPNA_H -#define KS8695_HPNA_H - -#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000) -#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET) -#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET) - - -/* - * HPNA registers - */ - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-irq.h b/include/asm-arm/arch-ks8695/regs-irq.h deleted file mode 100644 index 70b193f6b756..000000000000 --- a/include/asm-arm/arch-ks8695/regs-irq.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-irq.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - IRQ registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_IRQ_H -#define KS8695_IRQ_H - -#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200) -#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET) -#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET) - - -/* - * Interrupt Controller registers - */ -#define KS8695_INTMC (0x00) /* Mode Control Register */ -#define KS8695_INTEN (0x04) /* Interrupt Enable Register */ -#define KS8695_INTST (0x08) /* Interrupt Status Register */ -#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */ -#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */ -#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */ -#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */ -#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */ -#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */ -#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */ -#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */ -#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */ -#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */ -#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-lan.h b/include/asm-arm/arch-ks8695/regs-lan.h deleted file mode 100644 index a63bd61c64ed..000000000000 --- a/include/asm-arm/arch-ks8695/regs-lan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-lan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - LAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_LAN_H -#define KS8695_LAN_H - -#define KS8695_LAN_OFFSET (0xF0000 + 0x8000) -#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET) -#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET) - - -/* - * LAN registers - */ -#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_LMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_LMAL (0x18) /* MAC Station Address Low */ -#define KS8695_LMAH (0x1c) /* MAC Station Address High */ -#define KS8695_LMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_LMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */ -#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */ -#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */ -#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */ -#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */ -#define LMDTXC_LMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */ -#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */ -#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */ -#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */ -#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */ -#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */ -#define LMDRXC_LMRA (1 << 2) /* Receive All */ -#define LMDRXC_LMRE (1 << 1) /* RX Enable */ - -/* Additional Station Address High */ -#define LMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-mem.h b/include/asm-arm/arch-ks8695/regs-mem.h deleted file mode 100644 index 76b38e0862e6..000000000000 --- a/include/asm-arm/arch-ks8695/regs-mem.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-mem.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Memory Controller registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MEM_H -#define KS8695_MEM_H - -#define KS8695_MEM_OFFSET (0xF0000 + 0x4000) -#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET) -#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET) - - -/* - * Memory Controller Registers - */ -#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */ -#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */ -#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */ -#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */ -#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */ -#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */ -#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */ -#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */ -#define KS8695_SDGCON (0x38) /* SDRAM General Control */ -#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */ -#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */ - - -/* External I/O Access Control Registers */ -#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */ -#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */ -#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */ -#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */ -#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */ - -/* ROM/SRAM/Flash Control Register */ -#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */ -#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */ -#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */ -#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */ -#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */ -#define PMC_NORMAL (0 << 0) -#define PMC_4WORD (1 << 0) -#define PMC_8WORD (2 << 0) -#define PMC_16WORD (3 << 0) - -/* External I/O and ROM/SRAM/Flash General Register */ -#define ERGCON_TMULT (3 << 28) /* Time Multiplier */ -#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */ -#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */ -#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */ -#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */ -#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */ - -/* SDRAM Control Register */ -#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */ -#define SDCON_DBCAB (3 << 8) /* Column Address Bits */ -#define SDCON_DBBNUM (1 << 3) /* Number of Banks */ -#define SDCON_DBDBW (3 << 1) /* Data Bus Width */ - -/* SDRAM General Control Register */ -#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */ -#define SDGCON_SDCAS (3 << 0) /* CAS latency */ - -/* SDRAM Buffer Control Register */ -#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */ -#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */ -#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */ -#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */ -#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */ -#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */ -#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */ -#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */ - -/* SDRAM Refresh Timer Register */ -#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-misc.h b/include/asm-arm/arch-ks8695/regs-misc.h deleted file mode 100644 index 632ca6601a94..000000000000 --- a/include/asm-arm/arch-ks8695/regs-misc.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-misc.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Miscellaneous Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MISC_H -#define KS8695_MISC_H - -#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00) -#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET) -#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET) - - -/* - * Miscellaneous registers - */ -#define KS8695_DID (0x00) /* Device ID */ -#define KS8695_RID (0x04) /* Revision ID */ -#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */ -#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */ -#define KS8695_WPPM (0x10) /* WAN PHY Power Management */ -#define KS8695_PPS (0x1c) /* PHY PowerSave */ - -/* Device ID Register */ -#define DID_ID (0xffff << 0) /* Device ID */ - -/* Revision ID Register */ -#define RID_SUBID (0xf << 4) /* Sub-Device ID */ -#define RID_REVISION (0xf << 0) /* Revision ID */ - -/* HPNA Miscellaneous Control Register */ -#define HMC_HSS (1 << 1) /* Speed */ -#define HMC_HDS (1 << 0) /* Duplex */ - -/* WAN Miscellaneous Control Register */ -#define WMC_WANC (1 << 30) /* Auto-negotiation complete */ -#define WMC_WANR (1 << 29) /* Auto-negotiation restart */ -#define WMC_WANAP (1 << 28) /* Advertise Pause */ -#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */ -#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */ -#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */ -#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */ -#define WMC_WLS (1 << 23) /* Link status */ -#define WMC_WDS (1 << 22) /* Duplex status */ -#define WMC_WSS (1 << 21) /* Speed status */ -#define WMC_WLPP (1 << 20) /* Link Partner Pause */ -#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */ -#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */ -#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */ -#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */ -#define WMC_WAND (1 << 15) /* Auto-negotiation disable */ -#define WMC_WANF100 (1 << 14) /* Force 100 */ -#define WMC_WANFF (1 << 13) /* Force FDX */ -#define WMC_WLED1S (7 << 4) /* LED1 Select */ -#define WLED1S_SPEED (0 << 4) -#define WLED1S_LINK (1 << 4) -#define WLED1S_DUPLEX (2 << 4) -#define WLED1S_COLLISION (3 << 4) -#define WLED1S_ACTIVITY (4 << 4) -#define WLED1S_FDX_COLLISION (5 << 4) -#define WLED1S_LINK_ACTIVITY (6 << 4) -#define WMC_WLED0S (7 << 0) /* LED0 Select */ -#define WLED0S_SPEED (0 << 0) -#define WLED0S_LINK (1 << 0) -#define WLED0S_DUPLEX (2 << 0) -#define WLED0S_COLLISION (3 << 0) -#define WLED0S_ACTIVITY (4 << 0) -#define WLED0S_FDX_COLLISION (5 << 0) -#define WLED0S_LINK_ACTIVITY (6 << 0) - -/* WAN PHY Power Management Register */ -#define WPPM_WLPBK (1 << 14) /* Local Loopback */ -#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */ -#define WPPM_WPI (1 << 12) /* PHY isolate */ -#define WPPM_WFL (1 << 10) /* Force link */ -#define WPPM_MDIXS (1 << 9) /* MDIX Status */ -#define WPPM_FEF (1 << 8) /* Far End Fault */ -#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */ -#define WPPM_TXDIS (1 << 6) /* Disable transmitter */ -#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */ -#define WPPM_PD (1 << 4) /* Power Down */ -#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */ -#define WPPM_FMDX (1 << 2) /* Force MDIX */ -#define WPPM_LPBK (1 << 1) /* MAX Loopback */ - -/* PHY Power Save Register */ -#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-pci.h b/include/asm-arm/arch-ks8695/regs-pci.h deleted file mode 100644 index 286d6d488df8..000000000000 --- a/include/asm-arm/arch-ks8695/regs-pci.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-pci.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - PCI bridge registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define KS8695_PCI_OFFSET (0xF0000 + 0x2000) -#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET) -#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET) - - -#define KS8695_CRCFID (0x000) /* Configuration: Identification */ -#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */ -#define KS8695_CRCFRV (0x008) /* Configuration: Revision */ -#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */ -#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */ -#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */ -#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */ -#define KS8695_PBCA (0x100) /* Bridge Configuration Address */ -#define KS8695_PBCD (0x104) /* Bridge Configuration Data */ -#define KS8695_PBM (0x200) /* Bridge Mode */ -#define KS8695_PBCS (0x204) /* Bridge Control and Status */ -#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */ -#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */ -#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */ -#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */ -#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */ -#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */ -#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */ -#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */ - - -/* Configuration: Identification */ - -/* Configuration: Command and Status */ - -/* Configuration: Revision */ - - - -#define CFRV_GUEST (1 << 23) - -#define PBCA_TYPE1 (1) -#define PBCA_ENABLE (1 << 31) - - diff --git a/include/asm-arm/arch-ks8695/regs-switch.h b/include/asm-arm/arch-ks8695/regs-switch.h deleted file mode 100644 index 5f37be3f2f60..000000000000 --- a/include/asm-arm/arch-ks8695/regs-switch.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-switch.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Switch Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SWITCH_H -#define KS8695_SWITCH_H - -#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800) -#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET) -#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET) - - -/* - * Switch registers - */ -#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */ -#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ -#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ - -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ - -#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ -#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ -#define KS8695_SEIAC (0x50) /* Indirect Access Control */ -#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */ -#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */ -#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */ -#define KS8695_SEAFC (0x60) /* Advance Feature Control */ -#define KS8695_SEDSCPH (0x64) /* TOS Priority High */ -#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */ -#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */ -#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */ -#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */ -#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */ - - -/* Switch Engine Control 0 */ -#define SEC0_LLED1S (7 << 25) /* LED1 Select */ -#define LLED1S_SPEED (0 << 25) -#define LLED1S_LINK (1 << 25) -#define LLED1S_DUPLEX (2 << 25) -#define LLED1S_COLLISION (3 << 25) -#define LLED1S_ACTIVITY (4 << 25) -#define LLED1S_FDX_COLLISION (5 << 25) -#define LLED1S_LINK_ACTIVITY (6 << 25) -#define SEC0_LLED0S (7 << 22) /* LED0 Select */ -#define LLED0S_SPEED (0 << 22) -#define LLED0S_LINK (1 << 22) -#define LLED0S_DUPLEX (2 << 22) -#define LLED0S_COLLISION (3 << 22) -#define LLED0S_ACTIVITY (4 << 22) -#define LLED0S_FDX_COLLISION (5 << 22) -#define LLED0S_LINK_ACTIVITY (6 << 22) -#define SEC0_ENABLE (1 << 0) /* Enable Switch */ - - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-sys.h b/include/asm-arm/arch-ks8695/regs-sys.h deleted file mode 100644 index f3179815b8ee..000000000000 --- a/include/asm-arm/arch-ks8695/regs-sys.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-sys.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - System control registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SYS_H -#define KS8695_SYS_H - -#define KS8695_SYS_OFFSET (0xF0000 + 0x0000) -#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET) -#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET) - - -#define KS8695_SYSCFG (0x00) /* System Configuration Register */ -#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */ - - -/* System Configuration Register */ -#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */ - -/* System Clock and Bus Control Register */ -#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */ -#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-timer.h b/include/asm-arm/arch-ks8695/regs-timer.h deleted file mode 100644 index 0a9f7f99ec52..000000000000 --- a/include/asm-arm/arch-ks8695/regs-timer.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-timer.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Timer registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_TIMER_H -#define KS8695_TIMER_H - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) - - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ - - -/* Timer Control Register */ -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-uart.h b/include/asm-arm/arch-ks8695/regs-uart.h deleted file mode 100644 index a27cb20502a3..000000000000 --- a/include/asm-arm/arch-ks8695/regs-uart.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/include/asm-arm/arch-ks8695/regs-uart.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - UART register and bit definitions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef KS8695_UART_H -#define KS8695_UART_H - -#define KS8695_UART_OFFSET (0xF0000 + 0xE000) -#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET) -#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET) - - -/* - * UART registers - */ -#define KS8695_URRB (0x00) /* Receive Buffer Register */ -#define KS8695_URTH (0x04) /* Transmit Holding Register */ -#define KS8695_URFC (0x08) /* FIFO Control Register */ -#define KS8695_URLC (0x0C) /* Line Control Register */ -#define KS8695_URMC (0x10) /* Modem Control Register */ -#define KS8695_URLS (0x14) /* Line Status Register */ -#define KS8695_URMS (0x18) /* Modem Status Register */ -#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */ -#define KS8695_USR (0x20) /* Status Register */ - - -/* FIFO Control Register */ -#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */ -#define URFC_URFRT_1 (0 << 6) -#define URFC_URFRT_4 (1 << 6) -#define URFC_URFRT_8 (2 << 6) -#define URFC_URFRT_14 (3 << 6) -#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */ -#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */ -#define URFC_URFE (1 << 0) /* FIFO Enable */ - -/* Line Control Register */ -#define URLC_URSBC (1 << 6) /* Set Break Condition */ -#define URLC_PARITY (7 << 3) /* Parity */ -#define URPE_NONE (0 << 3) -#define URPE_ODD (1 << 3) -#define URPE_EVEN (3 << 3) -#define URPE_MARK (5 << 3) -#define URPE_SPACE (7 << 3) -#define URLC_URSB (1 << 2) /* Stop Bits */ -#define URLC_URCL (3 << 0) /* Character Length */ -#define URCL_5 (0 << 0) -#define URCL_6 (1 << 0) -#define URCL_7 (2 << 0) -#define URCL_8 (3 << 0) - -/* Modem Control Register */ -#define URMC_URLB (1 << 4) /* Loop-back mode */ -#define URMC_UROUT2 (1 << 3) /* OUT2 signal */ -#define URMC_UROUT1 (1 << 2) /* OUT1 signal */ -#define URMC_URRTS (1 << 1) /* Request to Send */ -#define URMC_URDTR (1 << 0) /* Data Terminal Ready */ - -/* Line Status Register */ -#define URLS_URRFE (1 << 7) /* Receive FIFO Error */ -#define URLS_URTE (1 << 6) /* Transmit Empty */ -#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */ -#define URLS_URBI (1 << 4) /* Break Interrupt */ -#define URLS_URFE (1 << 3) /* Framing Error */ -#define URLS_URPE (1 << 2) /* Parity Error */ -#define URLS_URROE (1 << 1) /* Receive Overrun Error */ -#define URLS_URDR (1 << 0) /* Receive Data Ready */ - -/* Modem Status Register */ -#define URMS_URDCD (1 << 7) /* Data Carrier Detect */ -#define URMS_URRI (1 << 6) /* Ring Indicator */ -#define URMS_URDSR (1 << 5) /* Data Set Ready */ -#define URMS_URCTS (1 << 4) /* Clear to Send */ -#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */ -#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */ -#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */ - -/* Status Register */ -#define USR_UTI (1 << 0) /* Timeout Indication */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/regs-wan.h b/include/asm-arm/arch-ks8695/regs-wan.h deleted file mode 100644 index 52e35b0d65e4..000000000000 --- a/include/asm-arm/arch-ks8695/regs-wan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - WAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_WAN_H -#define KS8695_WAN_H - -#define KS8695_WAN_OFFSET (0xF0000 + 0x6000) -#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET) -#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET) - - -/* - * WAN registers - */ -#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_WMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_WMAL (0x18) /* MAC Station Address Low */ -#define KS8695_WMAH (0x1c) /* MAC Station Address High */ -#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */ -#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */ -#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */ -#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */ -#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */ -#define WMDTXC_WMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */ -#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */ -#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */ -#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */ -#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */ -#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */ -#define WMDRXC_WMRA (1 << 2) /* Receive All */ -#define WMDRXC_WMRE (1 << 0) /* RX Enable */ - -/* Additional Station Address High */ -#define WMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/include/asm-arm/arch-ks8695/system.h b/include/asm-arm/arch-ks8695/system.h deleted file mode 100644 index 3bc28106d937..000000000000 --- a/include/asm-arm/arch-ks8695/system.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-arm/arch-s3c2410/system.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * KS8695 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks, - */ - cpu_do_idle(); - -} - -static void arch_reset(char mode) -{ - unsigned int reg; - - if (mode == 's') - cpu_reset(0); - - /* disable timer0 */ - reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - - /* enable watchdog mode */ - __raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); - - /* re-enable timer0 */ - __raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); -} - -#endif diff --git a/include/asm-arm/arch-ks8695/timex.h b/include/asm-arm/arch-ks8695/timex.h deleted file mode 100644 index 8320d528b903..000000000000 --- a/include/asm-arm/arch-ks8695/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/timex.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks - * - * KS8695 - Time Parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* timers are derived from MCLK, which is 25MHz */ -#define CLOCK_TICK_RATE 25000000 - -#endif diff --git a/include/asm-arm/arch-ks8695/uncompress.h b/include/asm-arm/arch-ks8695/uncompress.h deleted file mode 100644 index 733a50855b5d..000000000000 --- a/include/asm-arm/arch-ks8695/uncompress.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/uncompress.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Kernel uncompressor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -static void putc(char c) -{ - while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) - barrier(); - - __raw_writel(c, KS8695_UART_PA + KS8695_URTH); -} - -static inline void flush(void) -{ - while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE)) - barrier(); -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif diff --git a/include/asm-arm/arch-ks8695/vmalloc.h b/include/asm-arm/arch-ks8695/vmalloc.h deleted file mode 100644 index d1d88e58117d..000000000000 --- a/include/asm-arm/arch-ks8695/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * include/asm-arm/arch-ks8695/vmalloc.h - * - * Copyright (C) 2006 Ben Dooks - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 vmalloc definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (KS8695_IO_VA & PGDIR_MASK) - -#endif diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h deleted file mode 100644 index 762cbc76c501..000000000000 --- a/include/asm-arm/arch-l7200/aux_reg.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/aux_reg.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 08-02-2000 SJH Created file - */ -#ifndef _ASM_ARCH_AUXREG_H -#define _ASM_ARCH_AUXREG_H - -#include - -#define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) - -/* - * Auxillary register values - */ -#define AUX_CLEAR 0x00000000 -#define AUX_DIAG_LED_ON 0x00000002 -#define AUX_RTS_UART1 0x00000004 -#define AUX_DTR_UART1 0x00000008 -#define AUX_KBD_COLUMN_12_HIGH 0x00000010 -#define AUX_KBD_COLUMN_12_OFF 0x00000020 -#define AUX_KBD_COLUMN_13_HIGH 0x00000040 -#define AUX_KBD_COLUMN_13_OFF 0x00000080 - -#endif diff --git a/include/asm-arm/arch-l7200/debug-macro.S b/include/asm-arm/arch-l7200/debug-macro.S deleted file mode 100644 index 846473318e8b..000000000000 --- a/include/asm-arm/arch-l7200/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-l7200/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .equ io_virt, IO_BASE - .equ io_phys, IO_START - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00044000 @ UART1 -@ add \rx, \rx, #0x00045000 @ UART2 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0] @ UARTDR - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full - bne 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #0x18] @ UARTFLG - tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy - bne 1001b - .endm diff --git a/include/asm-arm/arch-l7200/dma.h b/include/asm-arm/arch-l7200/dma.h deleted file mode 100644 index 4c7eca63f035..000000000000 --- a/include/asm-arm/arch-l7200/dma.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/dma.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 08-29-2000 SJH Created - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* DMA is not yet implemented! It should be the same as acorn, copy over.. */ - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 - -#define DMA_S0 0 - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-l7200/entry-macro.S b/include/asm-arm/arch-l7200/entry-macro.S deleted file mode 100644 index d5e7294df1d5..000000000000 --- a/include/asm-arm/arch-l7200/entry-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-l7200/entry-macro.S - * - * Low-level IRQ helper macros for L7200-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include - - .equ irq_base_addr, IO_BASE_2 - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqstat, #irq_base_addr @ Virt addr IRQ regs - add \irqstat, \irqstat, #0x00001000 @ Status reg - ldr \irqstat, [\irqstat, #0] @ get interrupts - mov \irqnr, #0 -1001: tst \irqstat, #1 - addeq \irqnr, \irqnr, #1 - moveq \irqstat, \irqstat, lsr #1 - tsteq \irqnr, #32 - beq 1001b - teq \irqnr, #32 - .endm - diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h deleted file mode 100644 index 6f20962df248..000000000000 --- a/include/asm-arm/arch-l7200/gp_timers.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/gp_timers.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 07-28-2000 SJH Created file - * 08-02-2000 SJH Used structure for registers - */ -#ifndef _ASM_ARCH_GPTIMERS_H -#define _ASM_ARCH_GPTIMERS_H - -#include - -/* - * Layout of L7200 general purpose timer registers - */ -struct GPT_Regs { - unsigned int TIMERLOAD; - unsigned int TIMERVALUE; - unsigned int TIMERCONTROL; - unsigned int TIMERCLEAR; -}; - -#define GPT_BASE (IO_BASE_2 + 0x3000) -#define l7200_timer1_regs ((volatile struct GPT_Regs *) (GPT_BASE)) -#define l7200_timer2_regs ((volatile struct GPT_Regs *) (GPT_BASE + 0x20)) - -/* - * General register values - */ -#define GPT_PRESCALE_1 0x00000000 -#define GPT_PRESCALE_16 0x00000004 -#define GPT_PRESCALE_256 0x00000008 -#define GPT_MODE_FREERUN 0x00000000 -#define GPT_MODE_PERIODIC 0x00000040 -#define GPT_ENABLE 0x00000080 -#define GPT_BZTOG 0x00000100 -#define GPT_BZMOD 0x00000200 -#define GPT_LOAD_MASK 0x0000ffff - -#endif diff --git a/include/asm-arm/arch-l7200/gpio.h b/include/asm-arm/arch-l7200/gpio.h deleted file mode 100644 index 0b63e4239bdd..000000000000 --- a/include/asm-arm/arch-l7200/gpio.h +++ /dev/null @@ -1,105 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/gpio.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * GPIO. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define GPIO_OFF 0x00005000 /* Offset from IO_START to the GPIO reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */ -#define GPIO_BASE (IO_BASE_2 + GPIO_OFF) /* Virtual addr of the GPIO reg. */ - -/* Offsets from the start of the GPIO for all the registers. */ -#define PADR_OFF 0x000 -#define PADDR_OFF 0x004 -#define PASBSR_OFF 0x008 -#define PAEENR_OFF 0x00c -#define PAESNR_OFF 0x010 -#define PAESTR_OFF 0x014 -#define PAIMR_OFF 0x018 -#define PAINT_OFF 0x01c - -#define PBDR_OFF 0x020 -#define PBDDR_OFF 0x024 -#define PBSBSR_OFF 0x028 -#define PBIMR_OFF 0x038 -#define PBINT_OFF 0x03c - -#define PCDR_OFF 0x040 -#define PCDDR_OFF 0x044 -#define PCSBSR_OFF 0x048 -#define PCIMR_OFF 0x058 -#define PCINT_OFF 0x05c - -#define PDDR_OFF 0x060 -#define PDDDR_OFF 0x064 -#define PDSBSR_OFF 0x068 -#define PDEENR_OFF 0x06c -#define PDESNR_OFF 0x070 -#define PDESTR_OFF 0x074 -#define PDIMR_OFF 0x078 -#define PDINT_OFF 0x07c - -#define PEDR_OFF 0x080 -#define PEDDR_OFF 0x084 -#define PESBSR_OFF 0x088 -#define PEEENR_OFF 0x08c -#define PEESNR_OFF 0x090 -#define PEESTR_OFF 0x094 -#define PEIMR_OFF 0x098 -#define PEINT_OFF 0x09c - -/* Define the GPIO registers for use by device drivers and the kernel. */ -#define PADR (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF)) -#define PADDR (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF)) -#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF)) -#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF)) -#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF)) -#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF)) -#define PAIMR (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF)) -#define PAINT (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF)) - -#define PBDR (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF)) -#define PBDDR (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF)) -#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF)) -#define PBIMR (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF)) -#define PBINT (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF)) - -#define PCDR (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF)) -#define PCDDR (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF)) -#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF)) -#define PCIMR (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF)) -#define PCINT (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF)) - -#define PDDR (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF)) -#define PDDDR (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF)) -#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF)) -#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF)) -#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF)) -#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF)) -#define PDIMR (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF)) -#define PDINT (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF)) - -#define PEDR (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF)) -#define PEDDR (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF)) -#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF)) -#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF)) -#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF)) -#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF)) -#define PEIMR (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF)) -#define PEINT (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF)) - -#define VEE_EN 0x02 -#define BACKLIGHT_EN 0x04 diff --git a/include/asm-arm/arch-l7200/hardware.h b/include/asm-arm/arch-l7200/hardware.h deleted file mode 100644 index 2ab43f3a4a8d..000000000000 --- a/include/asm-arm/arch-l7200/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/hardware.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * This file contains the hardware definitions for the - * LinkUp Systems L7200 SOC development board. - * - * Changelog: - * 02-01-2000 RS Created L7200 version, derived from rpc code - * 03-21-2000 SJH Cleaned up file - * 04-21-2000 RS Changed mapping of I/O in virtual space - * 04-25-2000 SJH Removed unused symbols and such - * 05-05-2000 SJH Complete rewrite - * 07-31-2000 SJH Added undocumented debug auxillary port to - * get at last two columns for keyboard driver - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_START 0xf0000000 -#define RAM_SIZE 0x02000000 -#define RAM_BASE 0xc0000000 - -#define IO_START 0x80000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE 0xd0000000 - -#define IO_START_2 0x90000000 /* I/O */ -#define IO_SIZE_2 0x01000000 -#define IO_BASE_2 0xd1000000 - -#define AUX_START 0x1a000000 /* AUX PORT */ -#define AUX_SIZE 0x01000000 -#define AUX_BASE 0xd2000000 - -#define FLASH1_START 0x00000000 /* FLASH BANK 1 */ -#define FLASH1_SIZE 0x01000000 -#define FLASH1_BASE 0xd3000000 - -#define FLASH2_START 0x10000000 /* FLASH BANK 2 */ -#define FLASH2_SIZE 0x01000000 -#define FLASH2_BASE 0xd4000000 - -#define ISA_START 0x20000000 /* ISA */ -#define ISA_SIZE 0x20000000 -#define ISA_BASE 0xe0000000 - -#define PCIO_BASE IO_BASE - -#endif diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h deleted file mode 100644 index e24a10a7ed8c..000000000000 --- a/include/asm-arm/arch-l7200/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/io.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-21-2000 SJH Created from linux/include/asm-arm/arch-nexuspci/io.h - * 08-31-2000 SJH Added in IO functions necessary for new drivers - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * There are not real ISA nor PCI buses, so we fake it. - */ -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-l7200/irqs.h b/include/asm-arm/arch-l7200/irqs.h deleted file mode 100644 index 7120c016e29e..000000000000 --- a/include/asm-arm/arch-l7200/irqs.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-arm/arch-l7200/irqs.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Create l7200 version - * 03-28-2000 SJH Removed unused interrupt - * 07-28-2000 SJH Added pseudo-keyboard interrupt - */ - -/* - * NOTE: The second timer (Timer 2) is used as the keyboard - * interrupt when the keyboard driver is enabled. - */ - -#define NR_IRQS 32 - -#define IRQ_STWDOG 0 /* Watchdog timer */ -#define IRQ_PROG 1 /* Programmable interrupt */ -#define IRQ_DEBUG_RX 2 /* Comm Rx debug */ -#define IRQ_DEBUG_TX 3 /* Comm Tx debug */ -#define IRQ_GCTC1 4 /* Timer 1 */ -#define IRQ_GCTC2 5 /* Timer 2 / Keyboard */ -#define IRQ_DMA 6 /* DMA controller */ -#define IRQ_CLCD 7 /* Color LCD controller */ -#define IRQ_SM_RX 8 /* Smart card */ -#define IRQ_SM_TX 9 /* Smart cart */ -#define IRQ_SM_RST 10 /* Smart card */ -#define IRQ_SIB 11 /* Serial Interface Bus */ -#define IRQ_MMC 12 /* MultiMediaCard */ -#define IRQ_SSP1 13 /* Synchronous Serial Port 1 */ -#define IRQ_SSP2 14 /* Synchronous Serial Port 1 */ -#define IRQ_SPI 15 /* SPI slave */ -#define IRQ_UART_1 16 /* UART 1 */ -#define IRQ_UART_2 17 /* UART 2 */ -#define IRQ_IRDA 18 /* IRDA */ -#define IRQ_RTC_TICK 19 /* Real Time Clock tick */ -#define IRQ_RTC_ALARM 20 /* Real Time Clock alarm */ -#define IRQ_GPIO 21 /* General Purpose IO */ -#define IRQ_GPIO_DMA 22 /* General Purpose IO, DMA */ -#define IRQ_M2M 23 /* Memory to memory DMA */ -#define IRQ_RESERVED 24 /* RESERVED, don't use */ -#define IRQ_INTF 25 /* External active low interrupt */ -#define IRQ_INT0 26 /* External active low interrupt */ -#define IRQ_INT1 27 /* External active low interrupt */ -#define IRQ_INT2 28 /* External active low interrupt */ -#define IRQ_UCB1200 29 /* Interrupt generated by UCB1200*/ -#define IRQ_BAT_LO 30 /* Low batery or external power */ -#define IRQ_MEDIA_CHG 31 /* Media change interrupt */ - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 diff --git a/include/asm-arm/arch-l7200/memory.h b/include/asm-arm/arch-l7200/memory.h deleted file mode 100644 index 402df637e740..000000000000 --- a/include/asm-arm/arch-l7200/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/memory.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * - * Changelog: - * 03-13-2000 SJH Created - * 04-13-2000 RS Changed bus macros for new addr - * 05-03-2000 SJH Removed bus macros and fixed virt_to_phys macro - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset on the L7200 SDB. - */ -#define PHYS_OFFSET UL(0xf0000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x40000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-l7200/pmpcon.h b/include/asm-arm/arch-l7200/pmpcon.h deleted file mode 100644 index 730056c194be..000000000000 --- a/include/asm-arm/arch-l7200/pmpcon.h +++ /dev/null @@ -1,46 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/pmpcon.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * DC/DC converter register. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMPCON_OFF 0x00006000 /* Offset from IO_START_2. */ - -/* IO_START_2 and IO_BASE_2 are defined in hardware.h */ - -#define PMPCON_START (IO_START_2 + PMPCON_OFF) /* Physical address of reg. */ -#define PMPCON_BASE (IO_BASE_2 + PMPCON_OFF) /* Virtual address of reg. */ - - -#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE)) - -#define PWM2_50CYCLE 0x800 -#define CONTRAST 0x9 - -#define PWM1H (CONTRAST) -#define PWM1L (CONTRAST << 4) - -#define PMPCON_VALUE (PWM2_50CYCLE | PWM1L | PWM1H) - -/* PMPCON = 0x811; // too light and fuzzy - * PMPCON = 0x844; - * PMPCON = 0x866; // better color poor depth - * PMPCON = 0x888; // Darker but better depth - * PMPCON = 0x899; // Darker even better depth - * PMPCON = 0x8aa; // too dark even better depth - * PMPCON = 0X8cc; // Way too dark - */ - -/* As CONTRAST value increases the greater the depth perception and - * the darker the colors. - */ diff --git a/include/asm-arm/arch-l7200/pmu.h b/include/asm-arm/arch-l7200/pmu.h deleted file mode 100644 index 57faea76d1b3..000000000000 --- a/include/asm-arm/arch-l7200/pmu.h +++ /dev/null @@ -1,125 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/pmu.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * Power Management Unit (PMU). - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define PMU_OFF 0x00050000 /* Offset from IO_START to the PMU registers. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define PMU_START (IO_START + PMU_OFF) /* Physical addr. of the PMU reg. */ -#define PMU_BASE (IO_BASE + PMU_OFF) /* Virtual addr. of the PMU reg. */ - - -/* Define the PMU registers for use by device drivers and the kernel. */ - -typedef struct { - unsigned int CURRENT; /* Current configuration register */ - unsigned int NEXT; /* Next configuration register */ - unsigned int reserved; - unsigned int RUN; /* Run configuration register */ - unsigned int COMM; /* Configuration command register */ - unsigned int SDRAM; /* SDRAM configuration bypass register */ -} pmu_interface; - -#define PMU ((volatile pmu_interface *)(PMU_BASE)) - - -/* Macro's for reading the common register fields. */ - -#define GET_TRANSOP(reg) ((reg >> 25) & 0x03) /* Bits 26-25 */ -#define GET_OSCEN(reg) ((reg >> 16) & 0x01) -#define GET_OSCMUX(reg) ((reg >> 15) & 0x01) -#define GET_PLLMUL(reg) ((reg >> 9) & 0x3f) /* Bits 14-9 */ -#define GET_PLLEN(reg) ((reg >> 8) & 0x01) -#define GET_PLLMUX(reg) ((reg >> 7) & 0x01) -#define GET_BCLK_DIV(reg) ((reg >> 3) & 0x03) /* Bits 4-3 */ -#define GET_SDRB_SEL(reg) ((reg >> 2) & 0x01) -#define GET_SDRF_SEL(reg) ((reg >> 1) & 0x01) -#define GET_FASTBUS(reg) (reg & 0x1) - -/* CFG_NEXT register */ - -#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f) /* Bits 24-18 */ -#define CFG_NEXT_INTRET ((PMU->NEXT >> 17) & 0x01) -#define CFG_NEXT_SDR_STOP ((PMU->NEXT >> 6) & 0x01) -#define CFG_NEXT_SYSCLKEN ((PMU->NEXT >> 5) & 0x01) - -/* Useful field values that can be used to construct the - * CFG_NEXT and CFG_RUN registers. - */ - -#define TRANSOP_NOP 0<<25 /* NOCHANGE_NOSTALL */ -#define NOCHANGE_STALL 1<<25 -#define CHANGE_NOSTALL 2<<25 -#define CHANGE_STALL 3<<25 - -#define INTRET 1<<17 -#define OSCEN 1<<16 -#define OSCMUX 1<<15 - -/* PLL frequencies */ - -#define PLLMUL_0 0<<9 /* 3.6864 MHz */ -#define PLLMUL_1 1<<9 /* ?????? MHz */ -#define PLLMUL_5 5<<9 /* 18.432 MHz */ -#define PLLMUL_10 10<<9 /* 36.864 MHz */ -#define PLLMUL_18 18<<9 /* ?????? MHz */ -#define PLLMUL_20 20<<9 /* 73.728 MHz */ -#define PLLMUL_32 32<<9 /* ?????? MHz */ -#define PLLMUL_35 35<<9 /* 129.024 MHz */ -#define PLLMUL_36 36<<9 /* ?????? MHz */ -#define PLLMUL_39 39<<9 /* ?????? MHz */ -#define PLLMUL_40 40<<9 /* 147.456 MHz */ - -/* Clock recovery times */ - -#define CRCLOCK_1 1<<18 -#define CRCLOCK_2 2<<18 -#define CRCLOCK_4 4<<18 -#define CRCLOCK_8 8<<18 -#define CRCLOCK_16 16<<18 -#define CRCLOCK_32 32<<18 -#define CRCLOCK_63 63<<18 -#define CRCLOCK_127 127<<18 - -#define PLLEN 1<<8 -#define PLLMUX 1<<7 -#define SDR_STOP 1<<6 -#define SYSCLKEN 1<<5 - -#define BCLK_DIV_4 2<<3 -#define BCLK_DIV_2 1<<3 -#define BCLK_DIV_1 0<<3 - -#define SDRB_SEL 1<<2 -#define SDRF_SEL 1<<1 -#define FASTBUS 1<<0 - - -/* CFG_SDRAM */ - -#define SDRREFFQ 1<<0 /* Only if SDRSTOPRQ is not set. */ -#define SDRREFACK 1<<1 /* Read-only */ -#define SDRSTOPRQ 1<<2 /* Only if SDRREFFQ is not set. */ -#define SDRSTOPACK 1<<3 /* Read-only */ -#define PICEN 1<<4 /* Enable Co-procesor */ -#define PICTEST 1<<5 - -#define GET_SDRREFFQ ((PMU->SDRAM >> 0) & 0x01) -#define GET_SDRREFACK ((PMU->SDRAM >> 1) & 0x01) /* Read-only */ -#define GET_SDRSTOPRQ ((PMU->SDRAM >> 2) & 0x01) -#define GET_SDRSTOPACK ((PMU->SDRAM >> 3) & 0x01) /* Read-only */ -#define GET_PICEN ((PMU->SDRAM >> 4) & 0x01) -#define GET_PICTEST ((PMU->SDRAM >> 5) & 0x01) diff --git a/include/asm-arm/arch-l7200/serial.h b/include/asm-arm/arch-l7200/serial.h deleted file mode 100644 index defb8b7fca73..000000000000 --- a/include/asm-arm/arch-l7200/serial.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/serial.h - * - * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 03-20-2000 SJH Created - * 03-26-2000 SJH Added flags for serial ports - * 03-27-2000 SJH Corrected BASE_BAUD value - * 04-14-2000 RS Made register addr dependent on IO_BASE - * 05-03-2000 SJH Complete rewrite - * 05-09-2000 SJH Stripped out architecture specific serial stuff - * and placed it in a separate file - * 07-28-2000 SJH Moved base baud rate variable - */ -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * Standard COM flags - */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#define STD_SERIAL_PORT_DEFNS \ - /* MAGIC UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS }, /* ttyLU0 */ \ - { 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS }, /* ttyLU1 */ \ - -#define EXTRA_SERIAL_PORT_DEFNS - -#endif diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h deleted file mode 100644 index b1008a9d23e5..000000000000 --- a/include/asm-arm/arch-l7200/serial_l7200.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/serial_l7200.h - * - * Copyright (c) 2000 Steven Hill (sjhill@cotw.com) - * - * Changelog: - * 05-09-2000 SJH Created - */ -#ifndef __ASM_ARCH_SERIAL_L7200_H -#define __ASM_ARCH_SERIAL_L7200_H - -#include - -/* - * This assumes you have a 3.6864 MHz clock for your UART. - */ -#define BASE_BAUD 3686400 - -/* - * UART base register addresses - */ -#define UART1_BASE (IO_BASE + 0x00044000) -#define UART2_BASE (IO_BASE + 0x00045000) - -/* - * UART register offsets - */ -#define UARTDR 0x00 /* Tx/Rx data */ -#define RXSTAT 0x04 /* Rx status */ -#define H_UBRLCR 0x08 /* mode register high */ -#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/ -#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/ -#define UARTCON 0x14 /* control register */ -#define UARTFLG 0x18 /* flag register */ -#define UARTINTSTAT 0x1C /* FIFO IRQ status register */ -#define UARTINTMASK 0x20 /* FIFO IRQ mask register */ - -/* - * UART baud rate register values - */ -#define BR_110 0x827 -#define BR_1200 0x06e -#define BR_2400 0x05f -#define BR_4800 0x02f -#define BR_9600 0x017 -#define BR_14400 0x00f -#define BR_19200 0x00b -#define BR_38400 0x005 -#define BR_57600 0x003 -#define BR_76800 0x002 -#define BR_115200 0x001 - -/* - * Receiver status register (RXSTAT) mask values - */ -#define RXSTAT_NO_ERR 0x00 /* No error */ -#define RXSTAT_FRM_ERR 0x01 /* Framing error */ -#define RXSTAT_PAR_ERR 0x02 /* Parity error */ -#define RXSTAT_OVR_ERR 0x04 /* Overrun error */ - -/* - * High byte of UART bit rate and line control register (H_UBRLCR) values - */ -#define UBRLCR_BRK 0x01 /* generate break on tx */ -#define UBRLCR_PEN 0x02 /* enable parity */ -#define UBRLCR_PDIS 0x00 /* disable parity */ -#define UBRLCR_EVEN 0x04 /* 1= even parity,0 = odd parity */ -#define UBRLCR_STP2 0x08 /* transmit 2 stop bits */ -#define UBRLCR_FIFO 0x10 /* enable FIFO */ -#define UBRLCR_LEN5 0x60 /* word length5 */ -#define UBRLCR_LEN6 0x40 /* word length6 */ -#define UBRLCR_LEN7 0x20 /* word length7 */ -#define UBRLCR_LEN8 0x00 /* word length8 */ - -/* - * UART control register (UARTCON) values - */ -#define UARTCON_UARTEN 0x01 /* Enable UART */ -#define UARTCON_DMAONERR 0x08 /* Mask RxDmaRq when errors occur */ - -/* - * UART flag register (UARTFLG) mask values - */ -#define UARTFLG_UTXFF 0x20 /* Transmit FIFO full */ -#define UARTFLG_URXFE 0x10 /* Receiver FIFO empty */ -#define UARTFLG_UBUSY 0x08 /* Transmitter busy */ -#define UARTFLG_DCD 0x04 /* Data carrier detect */ -#define UARTFLG_DSR 0x02 /* Data set ready */ -#define UARTFLG_CTS 0x01 /* Clear to send */ - -/* - * UART interrupt status/clear registers (UARTINTSTAT/CLR) values - */ -#define UART_TXINT 0x01 /* TX interrupt */ -#define UART_RXINT 0x02 /* RX interrupt */ -#define UART_RXERRINT 0x04 /* RX error interrupt */ -#define UART_MSINT 0x08 /* Modem Status interrupt */ -#define UART_UDINT 0x10 /* UART Disabled interrupt */ -#define UART_ALLIRQS 0x1f /* All interrupts */ - -#endif diff --git a/include/asm-arm/arch-l7200/sib.h b/include/asm-arm/arch-l7200/sib.h deleted file mode 100644 index bf4364ee2535..000000000000 --- a/include/asm-arm/arch-l7200/sib.h +++ /dev/null @@ -1,119 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/sib.h - * - * Registers and helper functions for the Serial Interface Bus. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SIB_OFF 0x00040000 /* Offset from IO_START to the SIB reg's. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */ -#define SIB_BASE (IO_BASE + SIB_OFF) /* Virtual addr of the SIB reg. */ - -/* Offsets from the start of the SIB for all the registers. */ - -/* Define the SIB registers for use by device drivers and the kernel. */ - -typedef struct -{ - unsigned int MCCR; /* SIB Control Register Offset: 0x00 */ - unsigned int RES1; /* Reserved Offset: 0x04 */ - unsigned int MCDR0; /* SIB Data Register 0 Offset: 0x08 */ - unsigned int MCDR1; /* SIB Data Register 1 Offset: 0x0c */ - unsigned int MCDR2; /* SIB Data Register 2 (UCB1x00) Offset: 0x10 */ - unsigned int RES2; /* Reserved Offset: 0x14 */ - unsigned int MCSR; /* SIB Status Register Offset: 0x18 */ -} SIB_Interface; - -#define SIB ((volatile SIB_Interface *) (SIB_BASE)) - -/* MCCR */ - -#define INTERNAL_FREQ 9216000 /* Hertz */ -#define AUDIO_FREQ 5000 /* Hertz */ -#define TELECOM_FREQ 5000 /* Hertz */ - -#define AUDIO_DIVIDE (INTERNAL_FREQ / (32 * AUDIO_FREQ)) -#define TELECOM_DIVIDE (INTERNAL_FREQ / (32 * TELECOM_FREQ)) - -#define MCCR_ASD57 AUDIO_DIVIDE -#define MCCR_TSD57 (TELECOM_DIVIDE << 8) -#define MCCR_MCE (1 << 16) /* SIB enable */ -#define MCCR_ECS (1 << 17) /* External Clock Select */ -#define MCCR_ADM (1 << 18) /* A/D Data Sampling */ -#define MCCR_PMC (1 << 26) /* PIN Multiplexer Control */ - - -#define GET_ASD ((SIB->MCCR >> 0) & 0x3f) /* Audio Sample Rate Div. */ -#define GET_TSD ((SIB->MCCR >> 8) & 0x3f) /* Telcom Sample Rate Div. */ -#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */ -#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */ -#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */ -#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ -#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */ -#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ -#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */ -#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */ -#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */ -#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */ -#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */ -#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */ - -/* MCDR0 */ - -#define AUDIO_RECV ((SIB->MCDR0 >> 4) & 0xfff) -#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4)) - -/* MCDR1 */ - -#define TELECOM_RECV ((SIB->MCDR1 >> 2) & 032fff) -#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2)) - - -/* MCSR */ - -#define MCSR_ATU (1 << 4) /* Audio Transmit FIFO Underrun */ -#define MCSR_ARO (1 << 5) /* Audio Receive FIFO Underrun */ -#define MCSR_TTU (1 << 6) /* TELECOM Transmit FIFO Underrun */ -#define MCSR_TRO (1 << 7) /* TELECOM Receive FIFO Underrun */ - -#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO) - - -#define GET_ATS ((SIB->MCSR >> 0) & 0x01) /* Audio Transmit FIFO Service Req*/ -#define GET_ARS ((SIB->MCSR >> 1) & 0x01) /* Audio Recv FIFO Service Request*/ -#define GET_TTS ((SIB->MCSR >> 2) & 0x01) /* TELECOM Transmit FIFO Flag */ -#define GET_TRS ((SIB->MCSR >> 3) & 0x01) /* TELECOM Recv FIFO Service Req. */ -#define GET_ATU ((SIB->MCSR >> 4) & 0x01) /* Audio Transmit FIFO Underrun */ -#define GET_ARO ((SIB->MCSR >> 5) & 0x01) /* Audio Receive FIFO Underrun */ -#define GET_TTU ((SIB->MCSR >> 6) & 0x01) /* TELECOM Transmit FIFO Underrun */ -#define GET_TRO ((SIB->MCSR >> 7) & 0x01) /* TELECOM Receive FIFO Underrun */ -#define GET_ANF ((SIB->MCSR >> 8) & 0x01) /* Audio Transmit FIFO not full */ -#define GET_ANE ((SIB->MCSR >> 9) & 0x01) /* Audio Receive FIFO not empty */ -#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */ -#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */ -#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */ -#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */ -#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */ -#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */ - -/* MCDR2 */ - -#define MCDR2_rW (1 << 16) - -#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff))) -#define MCDR2_WRITE_COMPLETE GET_CWC - -#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17)) -#define MCDR2_READ_COMPLETE GET_CRC -#define MCDR2_READ (SIB->MCDR2 & 0xffff) diff --git a/include/asm-arm/arch-l7200/sys-clock.h b/include/asm-arm/arch-l7200/sys-clock.h deleted file mode 100644 index 771c774f4815..000000000000 --- a/include/asm-arm/arch-l7200/sys-clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/****************************************************************************/ -/* - * linux/include/asm-arm/arch-l7200/sys-clock.h - * - * Registers and helper functions for the L7200 Link-Up Systems - * System clocks. - * - * (C) Copyright 2000, S A McConnell (samcconn@cotw.com) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - */ - -/****************************************************************************/ - -#define SYS_CLOCK_OFF 0x00050030 /* Offset from IO_START. */ - -/* IO_START and IO_BASE are defined in hardware.h */ - -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ -#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ - -/* Define the interface to the SYS_CLOCK */ - -typedef struct -{ - unsigned int ENABLE; - unsigned int ESYNC; - unsigned int SELECT; -} sys_clock_interface; - -#define SYS_CLOCK ((volatile sys_clock_interface *)(SYS_CLOCK_BASE)) - -//#define CLOCK_EN (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF)) -//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF)) -//#define CLOCK_SEL (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF)) - -/* SYS_CLOCK -> ENABLE */ - -#define SYN_EN 1<<0 -#define B18M_EN 1<<1 -#define CLK3M6_EN 1<<2 -#define BUART_EN 1<<3 -#define CLK18MU_EN 1<<4 -#define FIR_EN 1<<5 -#define MIRN_EN 1<<6 -#define UARTM_EN 1<<7 -#define SIBADC_EN 1<<8 -#define ALTD_EN 1<<9 -#define CLCLK_EN 1<<10 - -/* SYS_CLOCK -> SELECT */ - -#define CLK18M_DIV 1<<0 -#define MIR_SEL 1<<1 -#define SSP_SEL 1<<4 -#define MM_DIV 1<<5 -#define MM_SEL 1<<6 -#define ADC_SEL_2 0<<7 -#define ADC_SEL_4 1<<7 -#define ADC_SEL_8 3<<7 -#define ADC_SEL_16 7<<7 -#define ADC_SEL_32 0x0f<<7 -#define ADC_SEL_64 0x1f<<7 -#define ADC_SEL_128 0x3f<<7 -#define ALTD_SEL 1<<13 diff --git a/include/asm-arm/arch-l7200/system.h b/include/asm-arm/arch-l7200/system.h deleted file mode 100644 index efef950a5b5d..000000000000 --- a/include/asm-arm/arch-l7200/system.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/system.h - * - * Copyright (c) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog - * 03-21-2000 SJH Created - * 04-26-2000 SJH Fixed functions - * 05-03-2000 SJH Removed usage of obsolete 'iomd.h' - * 05-31-2000 SJH Properly implemented 'arch_idle' - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static inline void arch_idle(void) -{ - *(unsigned long *)(IO_BASE + 0x50004) = 1; /* idle mode */ -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - cpu_reset(0); - } -} - -#endif diff --git a/include/asm-arm/arch-l7200/time.h b/include/asm-arm/arch-l7200/time.h deleted file mode 100644 index ea22f7fff9cd..000000000000 --- a/include/asm-arm/arch-l7200/time.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/time.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 01-02-2000 RS Created l7200 version, derived from rpc code - * 05-03-2000 SJH Complete rewrite - */ -#ifndef _ASM_ARCH_TIME_H -#define _ASM_ARCH_TIME_H - -#include - -/* - * RTC base register address - */ -#define RTC_BASE (IO_BASE_2 + 0x2000) - -/* - * RTC registers - */ -#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000)) -#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004)) -#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008)) -#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c)) -#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010)) - -/* - * RTCCR register values - */ -#define RTC_RATE_32 0x00 /* 32 Hz tick */ -#define RTC_RATE_64 0x10 /* 64 Hz tick */ -#define RTC_RATE_128 0x20 /* 128 Hz tick */ -#define RTC_RATE_256 0x30 /* 256 Hz tick */ -#define RTC_EN_ALARM 0x01 /* Enable alarm */ -#define RTC_EN_TIC 0x04 /* Enable counter */ -#define RTC_EN_STWDOG 0x08 /* Enable watchdog */ - -/* - * Handler for RTC timer interrupt - */ -static irqreturn_t -timer_interrupt(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - do_timer(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(regs)); -#endif - do_profile(regs); - RTC_RTCC = 0; /* Clear interrupt */ - - return IRQ_HANDLED; -} - -/* - * Set up RTC timer interrupt, and return the current time in seconds. - */ -void __init time_init(void) -{ - RTC_RTCC = 0; /* Clear interrupt */ - - timer_irq.handler = timer_interrupt; - - setup_irq(IRQ_RTC_TICK, &timer_irq); - - RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */ -} - -#endif diff --git a/include/asm-arm/arch-l7200/timex.h b/include/asm-arm/arch-l7200/timex.h deleted file mode 100644 index 3c3202620f00..000000000000 --- a/include/asm-arm/arch-l7200/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/timex.h - * - * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net) - * Steve Hill (sjhill@cotw.com) - * - * 04-21-2000 RS Created file - * 05-03-2000 SJH Tick rate was wrong - * - */ - -/* - * On the ARM720T, clock ticks are set to 128 Hz. - * - * NOTE: The actual RTC value is set in 'time.h' which - * must be changed when choosing a different tick - * rate. The value of HZ in 'param.h' must also - * be changed to match below. - */ -#define CLOCK_TICK_RATE 128 diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h deleted file mode 100644 index c5ba0adf4a5d..000000000000 --- a/include/asm-arm/arch-l7200/uncompress.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/uncompress.h - * - * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) - * - * Changelog: - * 05-01-2000 SJH Created - * 05-13-2000 SJH Filled in function bodies - * 07-26-2000 SJH Removed hard coded baud rate - */ - -#include - -#define IO_UART IO_START + 0x00044000 - -#define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v)) -#define __raw_readb(p) (*(volatile unsigned char *)(p)) - -static inline void putc(int c) -{ - while(__raw_readb(IO_UART + 0x18) & 0x20 || - __raw_readb(IO_UART + 0x18) & 0x08) - barrier(); - - __raw_writeb(c, IO_UART + 0x00); -} - -static inline void flush(void) -{ -} - -static __inline__ void arch_decomp_setup(void) -{ - __raw_writeb(0x00, IO_UART + 0x08); /* Set HSB */ - __raw_writeb(0x00, IO_UART + 0x20); /* Disable IRQs */ - __raw_writeb(0x01, IO_UART + 0x14); /* Enable UART */ -} - -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-l7200/vmalloc.h b/include/asm-arm/arch-l7200/vmalloc.h deleted file mode 100644 index 816231eedaac..000000000000 --- a/include/asm-arm/arch-l7200/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-l7200/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h deleted file mode 100644 index 7d0ba18ad578..000000000000 --- a/include/asm-arm/arch-lh7a40x/clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/clocks.h - * - * Copyright (C) 2004 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CLOCKS_H -#define __ASM_ARCH_CLOCKS_H - -unsigned int fclkfreq_get (void); -unsigned int hclkfreq_get (void); -unsigned int pclkfreq_get (void); - -#endif /* _ASM_ARCH_CLOCKS_H */ diff --git a/include/asm-arm/arch-lh7a40x/constants.h b/include/asm-arm/arch-lh7a40x/constants.h deleted file mode 100644 index 51de96e87faf..000000000000 --- a/include/asm-arm/arch-lh7a40x/constants.h +++ /dev/null @@ -1,91 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/constants.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_CONSTANTS_H -#define __ASM_ARCH_CONSTANTS_H - - -/* Addressing constants */ - - /* SoC CPU IO addressing */ -#define IO_PHYS (0x80000000) -#define IO_VIRT (0xf8000000) -#define IO_SIZE (0x0000B000) - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_PHYS (0x20000000) -# define CPLD_VIRT (0xf2000000) -# define CPLD_SIZE PAGE_SIZE -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define IOBARRIER_PHYS 0x10000000 /* Second bank, fastest timing */ -# define IOBARRIER_VIRT 0xf0000000 -# define IOBARRIER_SIZE PAGE_SIZE - -# define CF_PHYS 0x60200000 -# define CF_VIRT 0xf6020000 -# define CF_SIZE (8*1024) - - /* The IO mappings for the LPD CPLD are, unfortunately, sparse. */ -# define CPLDX_PHYS(x) (0x70000000 | ((x) << 20)) -# define CPLDX_VIRT(x) (0xf7000000 | ((x) << 16)) -# define CPLD00_PHYS CPLDX_PHYS (0x00) /* Wired LAN */ -# define CPLD00_VIRT CPLDX_VIRT (0x00) -# define CPLD00_SIZE PAGE_SIZE -# define CPLD02_PHYS CPLDX_PHYS (0x02) -# define CPLD02_VIRT CPLDX_VIRT (0x02) -# define CPLD02_SIZE PAGE_SIZE -# define CPLD06_PHYS CPLDX_PHYS (0x06) -# define CPLD06_VIRT CPLDX_VIRT (0x06) -# define CPLD06_SIZE PAGE_SIZE -# define CPLD08_PHYS CPLDX_PHYS (0x08) -# define CPLD08_VIRT CPLDX_VIRT (0x08) -# define CPLD08_SIZE PAGE_SIZE -# define CPLD0A_PHYS CPLDX_PHYS (0x0a) -# define CPLD0A_VIRT CPLDX_VIRT (0x0a) -# define CPLD0A_SIZE PAGE_SIZE -# define CPLD0C_PHYS CPLDX_PHYS (0x0c) -# define CPLD0C_VIRT CPLDX_VIRT (0x0c) -# define CPLD0C_SIZE PAGE_SIZE -# define CPLD0E_PHYS CPLDX_PHYS (0x0e) -# define CPLD0E_VIRT CPLDX_VIRT (0x0e) -# define CPLD0E_SIZE PAGE_SIZE -# define CPLD10_PHYS CPLDX_PHYS (0x10) -# define CPLD10_VIRT CPLDX_VIRT (0x10) -# define CPLD10_SIZE PAGE_SIZE -# define CPLD12_PHYS CPLDX_PHYS (0x12) -# define CPLD12_VIRT CPLDX_VIRT (0x12) -# define CPLD12_SIZE PAGE_SIZE -# define CPLD14_PHYS CPLDX_PHYS (0x14) -# define CPLD14_VIRT CPLDX_VIRT (0x14) -# define CPLD14_SIZE PAGE_SIZE -# define CPLD16_PHYS CPLDX_PHYS (0x16) -# define CPLD16_VIRT CPLDX_VIRT (0x16) -# define CPLD16_SIZE PAGE_SIZE -# define CPLD18_PHYS CPLDX_PHYS (0x18) -# define CPLD18_VIRT CPLDX_VIRT (0x18) -# define CPLD18_SIZE PAGE_SIZE -# define CPLD1A_PHYS CPLDX_PHYS (0x1a) -# define CPLD1A_VIRT CPLDX_VIRT (0x1a) -# define CPLD1A_SIZE PAGE_SIZE -#endif - - /* Timing constants */ - -#define XTAL_IN 14745600 /* 14.7456 MHz crystal */ -#define PLL_CLOCK (XTAL_IN * 21) /* 309 MHz PLL clock */ -#define MAX_HCLK_KHZ 100000 /* HCLK max limit ~100MHz */ -#define HCLK (99993600) -//#define HCLK (119808000) - -#endif /* __ASM_ARCH_CONSTANTS_H */ diff --git a/include/asm-arm/arch-lh7a40x/debug-macro.S b/include/asm-arm/arch-lh7a40x/debug-macro.S deleted file mode 100644 index 421dcd6a8506..000000000000 --- a/include/asm-arm/arch-lh7a40x/debug-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* linux/include/asm-arm/arch-lh7a40x/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - @ It is not known if this will be appropriate for every 40x - @ board. - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00000700 @ offset from base - orreq \rx, \rx, #0x80000000 @ physical base - orrne \rx, \rx, #0xf8000000 @ virtual base - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] @ DATA - .endm - - .macro busyuart,rd,rx @ spin while busy -1001: ldr \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 3 @ BUSY (TX FIFO not empty) - bne 1001b @ yes, spin - .endm - - .macro waituart,rd,rx @ wait for Tx FIFO room -1001: ldrb \rd, [\rx, #0x10] @ STATUS - tst \rd, #1 << 5 @ TXFF (TX FIFO full) - bne 1001b @ yes, spin - .endm diff --git a/include/asm-arm/arch-lh7a40x/dma.h b/include/asm-arm/arch-lh7a40x/dma.h deleted file mode 100644 index a8cbd14bbf9d..000000000000 --- a/include/asm-arm/arch-lh7a40x/dma.h +++ /dev/null @@ -1,86 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/dma.h - * - * Copyright (C) 2005 Marc Singer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -typedef enum { - DMA_M2M0 = 0, - DMA_M2M1 = 1, - DMA_M2P0 = 2, /* Tx */ - DMA_M2P1 = 3, /* Rx */ - DMA_M2P2 = 4, /* Tx */ - DMA_M2P3 = 5, /* Rx */ - DMA_M2P4 = 6, /* Tx - AC97 */ - DMA_M2P5 = 7, /* Rx - AC97 */ - DMA_M2P6 = 8, /* Tx */ - DMA_M2P7 = 9, /* Rx */ -} dma_device_t; - -#define DMA_LENGTH_MAX ((64*1024) - 4) /* bytes */ - -#define DMAC_GCA __REG(DMAC_PHYS + 0x2b80) -#define DMAC_GIR __REG(DMAC_PHYS + 0x2bc0) - -#define DMAC_GIR_MMI1 (1<<11) -#define DMAC_GIR_MMI0 (1<<10) -#define DMAC_GIR_MPI8 (1<<9) -#define DMAC_GIR_MPI9 (1<<8) -#define DMAC_GIR_MPI6 (1<<7) -#define DMAC_GIR_MPI7 (1<<6) -#define DMAC_GIR_MPI4 (1<<5) -#define DMAC_GIR_MPI5 (1<<4) -#define DMAC_GIR_MPI2 (1<<3) -#define DMAC_GIR_MPI3 (1<<2) -#define DMAC_GIR_MPI0 (1<<1) -#define DMAC_GIR_MPI1 (1<<0) - -#define DMAC_M2P0 0x0000 -#define DMAC_M2P1 0x0040 -#define DMAC_M2P2 0x0080 -#define DMAC_M2P3 0x00c0 -#define DMAC_M2P4 0x0240 -#define DMAC_M2P5 0x0200 -#define DMAC_M2P6 0x02c0 -#define DMAC_M2P7 0x0280 -#define DMAC_M2P8 0x0340 -#define DMAC_M2P9 0x0300 -#define DMAC_M2M0 0x0100 -#define DMAC_M2M1 0x0140 - -#define DMAC_P_PCONTROL(c) __REG(DMAC_PHYS + (c) + 0x00) -#define DMAC_P_PINTERRUPT(c) __REG(DMAC_PHYS + (c) + 0x04) -#define DMAC_P_PPALLOC(c) __REG(DMAC_PHYS + (c) + 0x08) -#define DMAC_P_PSTATUS(c) __REG(DMAC_PHYS + (c) + 0x0c) -#define DMAC_P_REMAIN(c) __REG(DMAC_PHYS + (c) + 0x14) -#define DMAC_P_MAXCNT0(c) __REG(DMAC_PHYS + (c) + 0x20) -#define DMAC_P_BASE0(c) __REG(DMAC_PHYS + (c) + 0x24) -#define DMAC_P_CURRENT0(c) __REG(DMAC_PHYS + (c) + 0x28) -#define DMAC_P_MAXCNT1(c) __REG(DMAC_PHYS + (c) + 0x30) -#define DMAC_P_BASE1(c) __REG(DMAC_PHYS + (c) + 0x34) -#define DMAC_P_CURRENT1(c) __REG(DMAC_PHYS + (c) + 0x38) - -#define DMAC_PCONTROL_ENABLE (1<<4) - -#define DMAC_PORT_USB 0 -#define DMAC_PORT_SDMMC 1 -#define DMAC_PORT_AC97_1 2 -#define DMAC_PORT_AC97_2 3 -#define DMAC_PORT_AC97_3 4 -#define DMAC_PORT_UART1 6 -#define DMAC_PORT_UART2 7 -#define DMAC_PORT_UART3 8 - -#define DMAC_PSTATUS_CURRSTATE_SHIFT 4 -#define DMAC_PSTATUS_CURRSTATE_MASK 0x3 - -#define DMAC_PSTATUS_NEXTBUF (1<<6) -#define DMAC_PSTATUS_STALLRINT (1<<0) - -#define DMAC_INT_CHE (1<<3) -#define DMAC_INT_NFB (1<<1) -#define DMAC_INT_STALL (1<<0) diff --git a/include/asm-arm/arch-lh7a40x/entry-macro.S b/include/asm-arm/arch-lh7a40x/entry-macro.S deleted file mode 100644 index 34468e064629..000000000000 --- a/include/asm-arm/arch-lh7a40x/entry-macro.S +++ /dev/null @@ -1,149 +0,0 @@ -/* - * include/asm-arm/arch-lh7a40x/entry-macro.S - * - * Low-level IRQ helper macros for LH7A40x platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - -/* In order to allow there to be support for both of the processor - classes at the same time, we make a hack here that isn't very - pretty. At startup, the link pointed to with the - branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is - detected as a lh7a404. - - *** FIXME: we should clean this up so that there is only one - implementation for each CPU's design. - -*/ - -#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - -branch_irq_lh7a400: b 1000f - -@ Implementation of the LH7A404 get_irqnr_and_base. - - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector - b 1009f - -@ Implementation of the LH7A400 get_irqnr_and_base. - -1000: mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z - -1009: - .endm - - - -#elif defined (CONFIG_ARCH_LH7A400) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 - mov \base, #io_p2v(0x80000000) @ APB registers - ldr \irqstat, [\base, #0x500] @ PIC INTSR - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1008: movs \irqstat, #1 @ Force !Z -1009: - .endm - -#elif defined(CONFIG_ARCH_LH7A404) - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \irqnr, #0 @ VIC1 irq base - mov \base, #io_p2v(0x80000000) @ APB registers - add \base, \base, #0x8000 - ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 - ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS - bne 1001f - add \base, \base, #(0xa000 - 0x8000) - ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR - tst \tmp, #VA_VECTORED @ Direct vectored - bne 1002f - ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS - mov \irqnr, #32 @ VIC2 irq base - -1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry - bcs 1008f @ Bit set; irq found - add \irqnr, \irqnr, #1 - bne 1001b @ Until no bits - b 1009f @ Nothing? Hmm. -1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits -1008: movs \irqstat, #1 @ Force !Z - str \tmp, [\base, #0x0030] @ Clear vector -1009: - .endm -#endif - - diff --git a/include/asm-arm/arch-lh7a40x/hardware.h b/include/asm-arm/arch-lh7a40x/hardware.h deleted file mode 100644 index e9ff74fd7939..000000000000 --- a/include/asm-arm/arch-lh7a40x/hardware.h +++ /dev/null @@ -1,62 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/hardware.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * [ Substantially cribbed from include/asm-arm/arch-pxa/hardware.h ] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include /* Added for the sake of amba-clcd driver */ - -#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff)) -#define io_v2p(x) ( (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff)) - -#ifdef __ASSEMBLY__ - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#else - -# if 0 -# define __REG(x) (*((volatile u32 *)io_p2v(x))) -# else -/* - * This __REG() version gives the same results as the one above, except - * that we are fooling gcc somehow so it generates far better and smaller - * assembly code for access to contigous registers. It's a shame that gcc - * doesn't guess this by itself. - */ -#include -typedef struct { volatile u32 offset[4096]; } __regbase; -# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2] -# define __REG(x) __REGP(io_p2v(x)) -typedef struct { volatile u16 offset[4096]; } __regbase16; -# define __REGP16(x) ((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1] -# define __REG16(x) __REGP16(io_p2v(x)) -typedef struct { volatile u8 offset[4096]; } __regbase8; -# define __REGP8(x) ((__regbase8 *)((x)&~4095))->offset[(x)&4095] -# define __REG8(x) __REGP8(io_p2v(x)) -#endif - -/* Let's kick gcc's ass again... */ -# define __REG2(x,y) \ - ( __builtin_constant_p(y) ? (__REG((x) + (y))) \ - : (*(volatile u32 *)((u32)&__REG(x) + (y))) ) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#endif - -#define MASK_AND_SET(v,m,s) (v) = ((v)&~(m))|(s) - -#include "registers.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h deleted file mode 100644 index 8d591d0927c1..000000000000 --- a/include/asm-arm/arch-lh7a40x/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/io.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* No ISA or PCI bus on this machine. */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif /* __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h deleted file mode 100644 index afe8c7cbad6a..000000000000 --- a/include/asm-arm/arch-lh7a40x/irqs.h +++ /dev/null @@ -1,200 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/irqs.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* It is to be seen whether or not we can build a kernel for more than - * one board. For the time being, these macros assume that we cannot. - * Thus, it is OK to ifdef machine/board specific IRQ assignments. - */ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define FIQ_START 80 - -#if defined (CONFIG_ARCH_LH7A400) - - /* FIQs */ - -# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */ -# define IRQ_BLINT 1 /* Battery Low */ -# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */ -# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */ - - /* IRQs */ - -# define IRQ_CSINT 4 /* Audio Codec (ACI) */ -# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */ -# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */ -# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */ -# define IRQ_T1UI 8 /* Timer 1 underflow */ -# define IRQ_T2UI 9 /* Timer 2 underflow */ -# define IRQ_RTCMI 10 -# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */ -# define IRQ_UART1INTR 12 -# define IRQ_UART2INTR 13 -# define IRQ_LCDINTR 14 -# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */ -# define IRQ_UART3INTR 16 -# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */ -# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */ -# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */ -# define IRQ_USBINTR 20 -# define IRQ_DMAINTR 21 -# define IRQ_T3UI 22 /* Timer 3 underflow */ -# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */ -# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */ -# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */ -# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */ -# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */ - -# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0)) - -#endif - -#if defined (CONFIG_ARCH_LH7A404) - -# define IRQ_BROWN 0 /* Brownout */ -# define IRQ_WDTINTR 1 /* Watchdog Timer */ -# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */ -# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */ -# define IRQ_T1UI 4 /* Timer 1 underflow */ -# define IRQ_T2UI 5 /* Timer 2 underflow */ -# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */ -# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */ -# define IRQ_DMAM2P1 8 -# define IRQ_DMAM2P2 9 -# define IRQ_DMAM2P3 10 -# define IRQ_DMAM2P4 11 -# define IRQ_DMAM2P5 12 -# define IRQ_DMAM2P6 13 -# define IRQ_DMAM2P7 14 -# define IRQ_DMAM2P8 15 -# define IRQ_DMAM2P9 16 -# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */ -# define IRQ_DMAM2M1 18 -# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */ -# define IRQ_GPIO1INTR 20 -# define IRQ_GPIO2INTR 21 -# define IRQ_GPIO3INTR 22 -# define IRQ_SOFT_V1_23 23 /* -- Unassigned */ -# define IRQ_SOFT_V1_24 24 -# define IRQ_SOFT_V1_25 25 -# define IRQ_SOFT_V1_26 26 -# define IRQ_SOFT_V1_27 27 -# define IRQ_SOFT_V1_28 28 -# define IRQ_SOFT_V1_29 29 -# define IRQ_SOFT_V1_30 30 -# define IRQ_SOFT_V1_31 31 - -# define IRQ_BLINT 32 /* Battery Low */ -# define IRQ_BMIINTR 33 /* Battery Monitor */ -# define IRQ_MCINTR 34 /* Media Change */ -# define IRQ_TINTR 35 /* 64Hz Tick */ -# define IRQ_WEINT 36 /* Watchdog Expired */ -# define IRQ_RTCMI 37 /* Real-time Clock Match */ -# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */ -# define IRQ_UART1ERR 39 /* UART1 Error */ -# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */ -# define IRQ_UART2ERR 41 /* UART2 Error */ -# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */ -# define IRQ_UART3ERR 43 /* UART3 Error */ -# define IRQ_SCIINTR 44 /* Smart Card */ -# define IRQ_TSCINTR 45 /* Touchscreen */ -# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */ -# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */ -# define IRQ_GPIO5INTR 48 -# define IRQ_GPIO6INTR 49 -# define IRQ_GPIO7INTR 50 -# define IRQ_T3UI 51 /* Timer 3 underflow */ -# define IRQ_LCDINTR 52 /* LCD Controller */ -# define IRQ_SSPINTR 53 /* Synchronous Serial Port */ -# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */ -# define IRQ_USBINTR 55 /* USB Device Port */ -# define IRQ_USHINTR 56 /* USB Host Port */ -# define IRQ_SOFT_V2_25 57 /* -- Unassigned */ -# define IRQ_SOFT_V2_26 58 -# define IRQ_SOFT_V2_27 59 -# define IRQ_SOFT_V2_28 60 -# define IRQ_SOFT_V2_29 61 -# define IRQ_SOFT_V2_30 62 -# define IRQ_SOFT_V2_31 63 - -# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */ - - /* Given IRQ, return GPIO interrupt number 0-7 */ -# define IRQ_TO_GPIO(i) ((i) \ - - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\ - - IRQ_GPIO0INTR) - - /* Vector Address constants */ -# define VA_VECTORED 0x100 /* Set for vectored interrupt */ -# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */ -# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */ - -#endif - - /* IRQ aliases */ - -#if !defined (IRQ_GPIO0INTR) -# define IRQ_GPIO0INTR IRQ_GPIO0FIQ -#endif -#define IRQ_TICK IRQ_TINTR -#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */ -#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */ -#define IRQ_USB IRQ_USBINTR /* USB device */ - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */ -# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */ -# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */ -# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */ -# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */ -#endif - - /* System specific IRQs */ - -#define IRQ_BOARD_START NR_IRQ_CPU - -#ifdef CONFIG_MACH_KEV7A400 -# define IRQ_KEV7A400_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 5 -# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */ -# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */ -# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */ -# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */ -# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4 -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) -# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START -# define NR_IRQ_BOARD 2 -# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */ -# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */ -#endif - -#if defined (CONFIG_MACH_LPD7A400) -# define IRQ_TOUCH IRQ_LPD7A400_TS -#endif - -#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD) - -#endif diff --git a/include/asm-arm/arch-lh7a40x/memory.h b/include/asm-arm/arch-lh7a40x/memory.h deleted file mode 100644 index 9b0c8012e713..000000000000 --- a/include/asm-arm/arch-lh7a40x/memory.h +++ /dev/null @@ -1,76 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/memory.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * - * Refer to for more information. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xc0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#ifdef CONFIG_DISCONTIGMEM - -/* - * Given a kernel address, find the home node of the underlying memory. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define KVADDR_TO_NID(addr) \ - ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\ - | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1)) -# else /* 2 banks per node */ -# define KVADDR_TO_NID(addr) \ - (((unsigned long) (addr) - PAGE_OFFSET) >> 26) -# endif - -/* - * Given a page frame number, convert it to a node id. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define PFN_TO_NID(pfn) \ - (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\ - | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1)) -# else /* 2 banks per node */ -# define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT)) -#endif - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT) -# else /* 2 banks per node */ -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT) -# endif - -#endif - -#endif diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h deleted file mode 100644 index b4f09b3e2d03..000000000000 --- a/include/asm-arm/arch-lh7a40x/registers.h +++ /dev/null @@ -1,224 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/registers.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * Copyright (C) 2004 Logic Product Development - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef __ASM_ARCH_REGISTERS_H -#define __ASM_ARCH_REGISTERS_H - - - /* Physical register base addresses */ - -#define AC97C_PHYS (0x80000000) /* AC97 Controller */ -#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ -#define USB_PHYS (0x80000200) /* USB Client */ -#define SCI_PHYS (0x80000300) /* Secure Card Interface */ -#define CSC_PHYS (0x80000400) /* Clock/State Controller */ -#define INTC_PHYS (0x80000500) /* Interrupt Controller */ -#define UART1_PHYS (0x80000600) /* UART1 Controller */ -#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */ -#define UART2_PHYS (0x80000700) /* UART2 Controller */ -#define UART3_PHYS (0x80000800) /* UART3 Controller */ -#define DCDC_PHYS (0x80000900) /* DC to DC Controller */ -#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */ -#define SSP_PHYS (0x80000b00) /* Synchronous ... */ -#define TIMER_PHYS (0x80000c00) /* Timer Controller */ -#define RTC_PHYS (0x80000d00) /* Real-time Clock */ -#define GPIO_PHYS (0x80000e00) /* General Purpose IO */ -#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ -#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */ -#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */ -#define WDT_PHYS (0x80001400) /* Watchdog Timer */ -#define SMC_PHYS (0x80002000) /* Static Memory Controller */ -#define SDRC_PHYS (0x80002400) /* SDRAM Controller */ -#define DMAC_PHYS (0x80002800) /* DMA Controller */ -#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */ - - /* Physical registers of the LH7A404 */ - -#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */ -#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ -#define USBH_PHYS (0x80009000) /* USB OHCI host controller */ -#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ - -/*#define KBD_PHYS (0x80000e00) */ -/*#define LCDICP_PHYS (0x80001000) */ - - - /* Clock/State Controller register */ - -#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */ -#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ -#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */ -#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */ - -#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ -#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27) -#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26) -#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25) -#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24) -#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23) -#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22) -#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21) -#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20) -#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19) -#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18) -#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17) -#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16) - -#define CSC_PWRSR_CHIPMAN_SHIFT (24) -#define CSC_PWRSR_CHIPMAN_MASK (0xff) -#define CSC_PWRSR_CHIPID_SHIFT (16) -#define CSC_PWRSR_CHIPID_MASK (0xff) - -#define CSC_USBDRESET_APBRESETREG (1<<1) -#define CSC_USBDRESET_IORESETREG (1<<0) - - /* Interrupt Controller registers */ - -#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */ -#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */ -#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */ -#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */ - - - /* Vectored Interrupted Controller registers */ - -#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00) -#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04) -#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08) -#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c) -#define VIC1_INTEN __REG(VIC1_PHYS + 0x10) -#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14) -#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18) -#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c) -#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20) -#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30) -#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34) -#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100) -#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200) -#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00) -#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04) -#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08) -#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c) -#define VIC2_INTEN __REG(VIC2_PHYS + 0x10) -#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14) -#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18) -#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c) -#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20) -#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30) -#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34) -#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100) -#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200) - -#define VIC_CNTL_ENABLE (0x20) - - /* USB Host registers (Open HCI compatible) */ - -#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08) - - - /* GPIO registers */ - -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ -#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ -#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c) -#define GPIO_PADD __REG(GPIO_PHYS + 0x10) -#define GPIO_PAD __REG(GPIO_PHYS + 0x00) -#define GPIO_PCD __REG(GPIO_PHYS + 0x08) -#define GPIO_PCDD __REG(GPIO_PHYS + 0x18) -#define GPIO_PEDD __REG(GPIO_PHYS + 0x24) -#define GPIO_PED __REG(GPIO_PHYS + 0x20) - - - /* Static Memory Controller registers */ - -#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */ -#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */ -#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */ -#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */ -#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */ -#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */ - - -#ifdef CONFIG_MACH_KEV7A400 -# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */ -# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */ -# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */ -# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */ -# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */ -# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */ -# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08) -# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08) -# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a) -# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a) -# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c) -# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */ - -#endif - -#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) - -# define CPLD_CONTROL __REG16(CPLD02_PHYS) -# define CPLD_SPI_DATA __REG16(CPLD06_PHYS) -# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS) -# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS) -# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */ -# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS) -# define CPLD_FLASH __REG16(CPLD10_PHYS) -# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS) -# define CPLD_REVISION __REG16(CPLD14_PHYS) -# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS) -# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS) -# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS) - -#endif - - /* Timer registers */ - -#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */ -#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */ -#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */ -#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */ - -#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */ -#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */ -#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */ -#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */ - -#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */ - -#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */ -#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */ -#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */ -#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */ - -#define TIMER_C_ENABLE (1<<7) -#define TIMER_C_PERIODIC (1<<6) -#define TIMER_C_FREERUNNING (0) -#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */ -#define TIMER_C_508KHZ (0x08) - - /* GPIO registers */ - -#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */ -#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */ -#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */ -#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */ -#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */ -#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */ -#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */ - - -#endif /* _ASM_ARCH_REGISTERS_H */ diff --git a/include/asm-arm/arch-lh7a40x/ssp.h b/include/asm-arm/arch-lh7a40x/ssp.h deleted file mode 100644 index 132b1c4d5ce6..000000000000 --- a/include/asm-arm/arch-lh7a40x/ssp.h +++ /dev/null @@ -1,71 +0,0 @@ -/* ssp.h - $Id$ - - written by Marc Singer - 6 Dec 2004 - - Copyright (C) 2004 Marc Singer - - ----------- - DESCRIPTION - ----------- - - This SSP header is available throughout the kernel, for this - machine/architecture, because drivers that use it may be dispersed. - - This file was cloned from the 7952x implementation. It would be - better to share them, but we're taking an easier approach for the - time being. - -*/ - -#if !defined (__SSP_H__) -# define __SSP_H__ - -/* ----- Includes */ - -/* ----- Types */ - -struct ssp_driver { - int (*init) (void); - void (*exit) (void); - void (*acquire) (void); - void (*release) (void); - int (*configure) (int device, int mode, int speed, - int frame_size_write, int frame_size_read); - void (*chip_select) (int enable); - void (*set_callbacks) (void* handle, - irqreturn_t (*callback_tx)(void*), - irqreturn_t (*callback_rx)(void*)); - void (*enable) (void); - void (*disable) (void); -// int (*save_state) (void*); -// void (*restore_state) (void*); - int (*read) (void); - int (*write) (u16 data); - int (*write_read) (u16 data); - void (*flush) (void); - void (*write_async) (void* pv, size_t cb); - size_t (*write_pos) (void); -}; - - /* These modes are only available on the LH79524 */ -#define SSP_MODE_SPI (1) -#define SSP_MODE_SSI (2) -#define SSP_MODE_MICROWIRE (3) -#define SSP_MODE_I2S (4) - - /* CPLD SPI devices */ -#define DEVICE_EEPROM 0 /* Configuration eeprom */ -#define DEVICE_MAC 1 /* MAC eeprom (LPD79524) */ -#define DEVICE_CODEC 2 /* Audio codec */ -#define DEVICE_TOUCH 3 /* Touch screen (LPD79520) */ - -/* ----- Globals */ - -/* ----- Prototypes */ - -//extern struct ssp_driver lh79520_i2s_driver; -extern struct ssp_driver lh7a400_cpld_ssp_driver; - -#endif /* __SSP_H__ */ diff --git a/include/asm-arm/arch-lh7a40x/system.h b/include/asm-arm/arch-lh7a40x/system.h deleted file mode 100644 index e1df8aa460f2..000000000000 --- a/include/asm-arm/arch-lh7a40x/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/system.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -static inline void arch_idle(void) -{ - cpu_do_idle (); -} - -static inline void arch_reset(char mode) -{ - cpu_reset (0); -} diff --git a/include/asm-arm/arch-lh7a40x/timex.h b/include/asm-arm/arch-lh7a40x/timex.h deleted file mode 100644 index fa726b670829..000000000000 --- a/include/asm-arm/arch-lh7a40x/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/timex.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#define CLOCK_TICK_RATE (PLL_CLOCK/6/16) - -/* -#define CLOCK_TICK_RATE 3686400 -*/ diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h deleted file mode 100644 index 3d1ce0426a33..000000000000 --- a/include/asm-arm/arch-lh7a40x/uncompress.h +++ /dev/null @@ -1,38 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/uncompress.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -#include - -#ifndef UART_R_DATA -# define UART_R_DATA (0x00) -#endif -#ifndef UART_R_STATUS -# define UART_R_STATUS (0x10) -#endif -#define nTxRdy (0x20) /* Not TxReady (literally Tx FIFO full) */ - - /* Access UART with physical addresses before MMU is setup */ -#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) -#define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA)) - -static inline void putc(int ch) -{ - while (UART_STATUS & nTxRdy) - barrier(); - UART_DATA = ch; -} - -static inline void flush(void) -{ -} - - /* NULL functions; we don't presently need them */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-lh7a40x/vmalloc.h b/include/asm-arm/arch-lh7a40x/vmalloc.h deleted file mode 100644 index 8163e45109b9..000000000000 --- a/include/asm-arm/arch-lh7a40x/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* include/asm-arm/arch-lh7a40x/vmalloc.h - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-loki/debug-macro.S b/include/asm-arm/arch-loki/debug-macro.S deleted file mode 100644 index 585502e96513..000000000000 --- a/include/asm-arm/arch-loki/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-loki/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =LOKI_REGS_PHYS_BASE - ldrne \rx, =LOKI_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-loki/dma.h b/include/asm-arm/arch-loki/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/include/asm-arm/arch-loki/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-loki/entry-macro.S b/include/asm-arm/arch-loki/entry-macro.S deleted file mode 100644 index 693257cdbeb8..000000000000 --- a/include/asm-arm/arch-loki/entry-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * include/asm-arm/arch-loki/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #IRQ_CAUSE_OFF] - ldr \tmp, [\base, #IRQ_MASK_OFF] - mov \irqnr, #0 - ands \irqstat, \irqstat, \tmp - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/include/asm-arm/arch-loki/hardware.h b/include/asm-arm/arch-loki/hardware.h deleted file mode 100644 index f65b01c733b6..000000000000 --- a/include/asm-arm/arch-loki/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * include/asm-arm/arch-loki/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "loki.h" - - -#endif diff --git a/include/asm-arm/arch-loki/io.h b/include/asm-arm/arch-loki/io.h deleted file mode 100644 index e7418a915e75..000000000000 --- a/include/asm-arm/arch-loki/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-loki/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "loki.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE) - + LOKI_PCIE0_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-loki/irqs.h b/include/asm-arm/arch-loki/irqs.h deleted file mode 100644 index 7e4971438072..000000000000 --- a/include/asm-arm/arch-loki/irqs.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * include/asm-arm/arch-loki/irqs.h - * - * IRQ definitions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "loki.h" /* need GPIO_MAX */ - -/* - * Interrupt Controller - */ -#define IRQ_LOKI_PCIE_A_CPU_DRBL 0 -#define IRQ_LOKI_CPU_PCIE_A_DRBL 1 -#define IRQ_LOKI_PCIE_B_CPU_DRBL 2 -#define IRQ_LOKI_CPU_PCIE_B_DRBL 3 -#define IRQ_LOKI_COM_A_ERR 6 -#define IRQ_LOKI_COM_A_IN 7 -#define IRQ_LOKI_COM_A_OUT 8 -#define IRQ_LOKI_COM_B_ERR 9 -#define IRQ_LOKI_COM_B_IN 10 -#define IRQ_LOKI_COM_B_OUT 11 -#define IRQ_LOKI_DMA_A 12 -#define IRQ_LOKI_DMA_B 13 -#define IRQ_LOKI_SAS_A 14 -#define IRQ_LOKI_SAS_B 15 -#define IRQ_LOKI_DDR 16 -#define IRQ_LOKI_XOR 17 -#define IRQ_LOKI_BRIDGE 18 -#define IRQ_LOKI_PCIE_A_ERR 20 -#define IRQ_LOKI_PCIE_A_INT 21 -#define IRQ_LOKI_PCIE_B_ERR 22 -#define IRQ_LOKI_PCIE_B_INT 23 -#define IRQ_LOKI_GBE_A_INT 24 -#define IRQ_LOKI_GBE_B_INT 25 -#define IRQ_LOKI_DEV_ERR 26 -#define IRQ_LOKI_UART0 27 -#define IRQ_LOKI_UART1 28 -#define IRQ_LOKI_TWSI 29 -#define IRQ_LOKI_GPIO_23_0 30 -#define IRQ_LOKI_GPIO_25_24 31 - -/* - * Loki General Purpose Pins - */ -#define IRQ_LOKI_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-loki/loki.h b/include/asm-arm/arch-loki/loki.h deleted file mode 100644 index 5dd05ee0a4e6..000000000000 --- a/include/asm-arm/arch-loki/loki.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * include/asm-arm/arch-loki/loki.h - * - * Generic definitions for Marvell Loki (88RC8480) SoC flavors - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_LOKI_H -#define __ASM_ARCH_LOKI_H - -/* - * Marvell Loki (88RC8480) address maps. - * - * phys - * d0000000 on-chip peripheral registers - * e0000000 PCIe 0 Memory space - * e8000000 PCIe 1 Memory space - * f0000000 PCIe 0 I/O space - * f0100000 PCIe 1 I/O space - * - * virt phys size - * fed00000 d0000000 1M on-chip peripheral registers - * fee00000 f0000000 64K PCIe 0 I/O space - * fef00000 f0100000 64K PCIe 1 I/O space - */ - -#define LOKI_REGS_PHYS_BASE 0xd0000000 -#define LOKI_REGS_VIRT_BASE 0xfed00000 -#define LOKI_REGS_SIZE SZ_1M - -#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000 -#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000 -#define LOKI_PCIE0_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE0_IO_SIZE SZ_64K - -#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000 -#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000 -#define LOKI_PCIE1_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE1_IO_SIZE SZ_64K - -#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000 -#define LOKI_PCIE0_MEM_SIZE SZ_128M - -#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define LOKI_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) - -#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000) - -#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000) - -#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000) - -#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000) -#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000) - -#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000) -#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000) - -#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000) -#define DDR_REG(x) (DDR_VIRT_BASE | (x)) - - -#define GPIO_MAX 8 - - -#endif diff --git a/include/asm-arm/arch-loki/memory.h b/include/asm-arm/arch-loki/memory.h deleted file mode 100644 index 835101e49875..000000000000 --- a/include/asm-arm/arch-loki/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-loki/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-loki/system.h b/include/asm-arm/arch-loki/system.h deleted file mode 100644 index a3568ac8ec35..000000000000 --- a/include/asm-arm/arch-loki/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-loki/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-loki/timex.h b/include/asm-arm/arch-loki/timex.h deleted file mode 100644 index 940014f97cae..000000000000 --- a/include/asm-arm/arch-loki/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-arm/arch-loki/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define LOKI_TCLK 180000000 diff --git a/include/asm-arm/arch-loki/uncompress.h b/include/asm-arm/arch-loki/uncompress.h deleted file mode 100644 index 89a0cf88d3a5..000000000000 --- a/include/asm-arm/arch-loki/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-loki/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-loki/vmalloc.h b/include/asm-arm/arch-loki/vmalloc.h deleted file mode 100644 index f5be06220491..000000000000 --- a/include/asm-arm/arch-loki/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-loki/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000 diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h deleted file mode 100644 index 763051f8ba14..000000000000 --- a/include/asm-arm/arch-msm/board.h +++ /dev/null @@ -1,37 +0,0 @@ -/* linux/include/asm-arm/arch-msm/board.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_BOARD_H -#define __ASM_ARCH_MSM_BOARD_H - -#include - -/* platform device data structures */ - -struct msm_mddi_platform_data -{ - void (*panel_power)(int on); - unsigned has_vsync_irq:1; -}; - -/* common init routines for use by arch/arm/mach-msm/board-*.c */ - -void __init msm_add_devices(void); -void __init msm_map_common_io(void); -void __init msm_init_irq(void); -void __init msm_init_gpio(void); - -#endif diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S deleted file mode 100644 index e131b44b2107..000000000000 --- a/include/asm-arm/arch-msm/debug-macro.S +++ /dev/null @@ -1,40 +0,0 @@ -/* include/asm-arm/arch-msm7200/debug-macro.S - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include - - .macro addruart,rx - @ see if the MMU is enabled and select appropriate base address - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =MSM_UART1_PHYS - ldrne \rx, =MSM_UART1_BASE - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x0C] - .endm - - .macro waituart,rd,rx - @ wait for TX_READY -1: ldr \rd, [\rx, #0x08] - tst \rd, #0x04 - beq 1b - .endm - - .macro busyuart,rd,rx - .endm diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h deleted file mode 100644 index e4b565b27b35..000000000000 --- a/include/asm-arm/arch-msm/dma.h +++ /dev/null @@ -1,151 +0,0 @@ -/* linux/include/asm-arm/arch-msm/dma.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_DMA_H - -#include -#include - -struct msm_dmov_cmd { - struct list_head list; - unsigned int cmdptr; - void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result); -/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */ -}; - -void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd); -int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); -/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */ - - - -#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) -#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) -#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) -#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) - -/* only security domain 3 is available to the ARM11 - * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM - */ - -#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch) -#define DMOV_CMD_LIST (0 << 29) /* does not work */ -#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ -#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ -#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ -#define DMOV_CMD_ADDR(addr) ((addr) >> 3) - -#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch) -#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ -#define DMOV_RSLT_ERROR (1 << 3) -#define DMOV_RSLT_FLUSH (1 << 2) -#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ -#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ - -#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch) -#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch) -#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch) -#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch) -#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch) -#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch) - -#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch) -#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) -#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) -#define DMOV_STATUS_RSLT_VALID (1 << 1) -#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) - -#define DMOV_ISR DMOV_SD3(0x380, 0) - -#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch) -#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) -#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) -#define DMOV_CONFIG_IRQ_EN (1 << 0) - -/* channel assignments */ - -#define DMOV_NAND_CHAN 7 -#define DMOV_NAND_CRCI_CMD 5 -#define DMOV_NAND_CRCI_DATA 4 - -#define DMOV_SDC1_CHAN 8 -#define DMOV_SDC1_CRCI 6 - -#define DMOV_SDC2_CHAN 8 -#define DMOV_SDC2_CRCI 7 - -#define DMOV_TSIF_CHAN 10 -#define DMOV_TSIF_CRCI 10 - -#define DMOV_USB_CHAN 11 - -/* no client rate control ifc (eg, ram) */ -#define DMOV_NONE_CRCI 0 - - -/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover - * is going to walk a list of 32bit pointers as described below. Each - * pointer points to a *array* of dmov_s, etc structs. The last pointer - * in the list is marked with CMD_PTR_LP. The last struct in each array - * is marked with CMD_LC (see below). - */ -#define CMD_PTR_ADDR(addr) ((addr) >> 3) -#define CMD_PTR_LP (1 << 31) /* last pointer */ -#define CMD_PTR_PT (3 << 29) /* ? */ - -/* Single Item Mode */ -typedef struct { - unsigned cmd; - unsigned src; - unsigned dst; - unsigned len; -} dmov_s; - -/* Scatter/Gather Mode */ -typedef struct { - unsigned cmd; - unsigned src_dscr; - unsigned dst_dscr; - unsigned _reserved; -} dmov_sg; - -/* bits for the cmd field of the above structures */ - -#define CMD_LC (1 << 31) /* last command */ -#define CMD_FR (1 << 22) /* force result -- does not work? */ -#define CMD_OCU (1 << 21) /* other channel unblock */ -#define CMD_OCB (1 << 20) /* other channel block */ -#define CMD_TCB (1 << 19) /* ? */ -#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ -#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ - -#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ -#define CMD_MODE_SG (1 << 0) /* untested */ -#define CMD_MODE_IND_SG (2 << 0) /* untested */ -#define CMD_MODE_BOX (3 << 0) /* untested */ - -#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ -#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ -#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ - -#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ -#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ -#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ - -#define CMD_DST_CRCI(n) (((n) & 15) << 7) -#define CMD_SRC_CRCI(n) (((n) & 15) << 3) - -#endif diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S deleted file mode 100644 index ee24aece4cb0..000000000000 --- a/include/asm-arm/arch-msm/entry-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* include/asm-arm/arch-msm7200/entry-macro.S - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - @ enable imprecise aborts - cpsie a - mov \base, #MSM_VIC_BASE - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ 0xD0 has irq# or old irq# if the irq has been handled - @ 0xD4 has irq# or -1 if none pending *but* if you just - @ read 0xD4 you never get the first irq for some reason - ldr \irqnr, [\base, #0xD0] - ldr \irqnr, [\base, #0xD4] - cmp \irqnr, #0xffffffff - .endm diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h deleted file mode 100644 index 89af2b70182f..000000000000 --- a/include/asm-arm/arch-msm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-msm/hardware.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_HARDWARE_H - -#endif diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h deleted file mode 100644 index 4645ae26b62a..000000000000 --- a/include/asm-arm/arch-msm/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* include/asm-arm/arch-msm/io.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __arch_ioremap __msm_ioremap -#define __arch_iounmap __iounmap - -void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype); - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h deleted file mode 100644 index e62a108b1857..000000000000 --- a/include/asm-arm/arch-msm/irqs.h +++ /dev/null @@ -1,90 +0,0 @@ -/* linux/include/asm-arm/arch-msm/irqs.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_IRQS_H -#define __ASM_ARCH_MSM_IRQS_H - -/* MSM ARM11 Interrupt Numbers */ -/* See 80-VE113-1 A, pp219-221 */ - -#define INT_A9_M2A_0 0 -#define INT_A9_M2A_1 1 -#define INT_A9_M2A_2 2 -#define INT_A9_M2A_3 3 -#define INT_A9_M2A_4 4 -#define INT_A9_M2A_5 5 -#define INT_A9_M2A_6 6 -#define INT_GP_TIMER_EXP 7 -#define INT_DEBUG_TIMER_EXP 8 -#define INT_UART1 9 -#define INT_UART2 10 -#define INT_UART3 11 -#define INT_UART1_RX 12 -#define INT_UART2_RX 13 -#define INT_UART3_RX 14 -#define INT_USB_OTG 15 -#define INT_MDDI_PRI 16 -#define INT_MDDI_EXT 17 -#define INT_MDDI_CLIENT 18 -#define INT_MDP 19 -#define INT_GRAPHICS 20 -#define INT_ADM_AARM 21 -#define INT_ADSP_A11 22 -#define INT_ADSP_A9_A11 23 -#define INT_SDC1_0 24 -#define INT_SDC1_1 25 -#define INT_SDC2_0 26 -#define INT_SDC2_1 27 -#define INT_KEYSENSE 28 -#define INT_TCHSCRN_SSBI 29 -#define INT_TCHSCRN1 30 -#define INT_TCHSCRN2 31 - -#define INT_GPIO_GROUP1 (32 + 0) -#define INT_GPIO_GROUP2 (32 + 1) -#define INT_PWB_I2C (32 + 2) -#define INT_SOFTRESET (32 + 3) -#define INT_NAND_WR_ER_DONE (32 + 4) -#define INT_NAND_OP_DONE (32 + 5) -#define INT_PBUS_ARM11 (32 + 6) -#define INT_AXI_MPU_SMI (32 + 7) -#define INT_AXI_MPU_EBI1 (32 + 8) -#define INT_AD_HSSD (32 + 9) -#define INT_ARM11_PMU (32 + 10) -#define INT_ARM11_DMA (32 + 11) -#define INT_TSIF_IRQ (32 + 12) -#define INT_UART1DM_IRQ (32 + 13) -#define INT_UART1DM_RX (32 + 14) -#define INT_USB_HS (32 + 15) -#define INT_SDC3_0 (32 + 16) -#define INT_SDC3_1 (32 + 17) -#define INT_SDC4_0 (32 + 18) -#define INT_SDC4_1 (32 + 19) -#define INT_UART2DM_RX (32 + 20) -#define INT_UART2DM_IRQ (32 + 21) - -/* 22-31 are reserved */ - -#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) - -#define NR_MSM_IRQS 64 -#define NR_GPIO_IRQS 122 -#define NR_BOARD_IRQS 64 -#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) - -#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) - -#endif diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h deleted file mode 100644 index b5ce0e9ac86d..000000000000 --- a/include/asm-arm/arch-msm/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-msm/memory.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* physical offset of RAM */ -#define PHYS_OFFSET UL(0x10000000) - -/* bus address and physical addresses are identical */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h deleted file mode 100644 index b8955cc26fec..000000000000 --- a/include/asm-arm/arch-msm/msm_iomap.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/include/asm-arm/arch-msm/msm_iomap.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * The MSM peripherals are spread all over across 768MB of physical - * space, which makes just having a simple IO_ADDRESS macro to slide - * them into the right virtual location rough. Instead, we will - * provide a master phys->virt mapping for peripherals here. - * - */ - -#ifndef __ASM_ARCH_MSM_IOMAP_H -#define __ASM_ARCH_MSM_IOMAP_H - -#include - -/* Physical base address and size of peripherals. - * Ordered by the virtual base addresses they will be mapped at. - * - * MSM_VIC_BASE must be an value that can be loaded via a "mov" - * instruction, otherwise entry-macro.S will not compile. - * - * If you add or remove entries here, you'll want to edit the - * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your - * changes. - * - */ - -#define MSM_VIC_BASE 0xE0000000 -#define MSM_VIC_PHYS 0xC0000000 -#define MSM_VIC_SIZE SZ_4K - -#define MSM_CSR_BASE 0xE0001000 -#define MSM_CSR_PHYS 0xC0100000 -#define MSM_CSR_SIZE SZ_4K - -#define MSM_GPT_PHYS MSM_CSR_PHYS -#define MSM_GPT_BASE MSM_CSR_BASE -#define MSM_GPT_SIZE SZ_4K - -#define MSM_DMOV_BASE 0xE0002000 -#define MSM_DMOV_PHYS 0xA9700000 -#define MSM_DMOV_SIZE SZ_4K - -#define MSM_UART1_BASE 0xE0003000 -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART1_SIZE SZ_4K - -#define MSM_UART2_BASE 0xE0004000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART2_SIZE SZ_4K - -#define MSM_UART3_BASE 0xE0005000 -#define MSM_UART3_PHYS 0xA9C00000 -#define MSM_UART3_SIZE SZ_4K - -#define MSM_I2C_BASE 0xE0006000 -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K - -#define MSM_GPIO1_BASE 0xE0007000 -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K - -#define MSM_GPIO2_BASE 0xE0008000 -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K - -#define MSM_HSUSB_BASE 0xE0009000 -#define MSM_HSUSB_PHYS 0xA0800000 -#define MSM_HSUSB_SIZE SZ_4K - -#define MSM_CLK_CTL_BASE 0xE000A000 -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_PMDH_BASE 0xE000B000 -#define MSM_PMDH_PHYS 0xAA600000 -#define MSM_PMDH_SIZE SZ_4K - -#define MSM_EMDH_BASE 0xE000C000 -#define MSM_EMDH_PHYS 0xAA700000 -#define MSM_EMDH_SIZE SZ_4K - -#define MSM_MDP_BASE 0xE0010000 -#define MSM_MDP_PHYS 0xAA200000 -#define MSM_MDP_SIZE 0x000F0000 - -#define MSM_SHARED_RAM_BASE 0xE0100000 -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M - -#endif diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h deleted file mode 100644 index fb31b3aa6750..000000000000 --- a/include/asm-arm/arch-msm/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-msm/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - -void arch_idle(void); - -static inline void arch_reset(char mode) -{ - for (;;) ; /* depends on IPC w/ other core */ -} diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h deleted file mode 100644 index 8724487ab4c9..000000000000 --- a/include/asm-arm/arch-msm/timex.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-msm/timex.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_TIMEX_H -#define __ASM_ARCH_MSM_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h deleted file mode 100644 index e91ed786ffec..000000000000 --- a/include/asm-arm/arch-msm/uncompress.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/include/asm-arm/arch-msm/uncompress.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H - -#include "hardware.h" - -static void putc(int c) -{ -} - -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ -} - -static inline void arch_decomp_wdog(void) -{ -} - -#endif diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h deleted file mode 100644 index 60f8d910e825..000000000000 --- a/include/asm-arm/arch-msm/vmalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-msm/vmalloc.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ASM_ARCH_MSM_VMALLOC_H -#define __ASM_ARCH_MSM_VMALLOC_H - -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - -#endif - diff --git a/include/asm-arm/arch-mv78xx0/debug-macro.S b/include/asm-arm/arch-mv78xx0/debug-macro.S deleted file mode 100644 index d0595bd645e5..000000000000 --- a/include/asm-arm/arch-mv78xx0/debug-macro.S +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MV78XX0_REGS_PHYS_BASE - ldrne \rx, =MV78XX0_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-mv78xx0/dma.h b/include/asm-arm/arch-mv78xx0/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/include/asm-arm/arch-mv78xx0/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-mv78xx0/entry-macro.S b/include/asm-arm/arch-mv78xx0/entry-macro.S deleted file mode 100644 index e9a606b12669..000000000000 --- a/include/asm-arm/arch-mv78xx0/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/entry-macro.S - * - * Low-level IRQ helper macros for Marvell MV78xx0 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - @ check low interrupts - ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF] - ldr \tmp, [\base, #IRQ_MASK_LOW_OFF] - mov \irqnr, #31 - ands \irqstat, \irqstat, \tmp - - @ if no low interrupts set, check high interrupts - ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF] - ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF] - moveq \irqnr, #63 - andeqs \irqstat, \irqstat, \tmp - - @ find first active interrupt source - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/include/asm-arm/arch-mv78xx0/hardware.h b/include/asm-arm/arch-mv78xx0/hardware.h deleted file mode 100644 index 8e17926086c6..000000000000 --- a/include/asm-arm/arch-mv78xx0/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/hardware.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "mv78xx0.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/io.h b/include/asm-arm/arch-mv78xx0/io.h deleted file mode 100644 index 415d4c98e3d1..000000000000 --- a/include/asm-arm/arch-mv78xx0/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "mv78xx0.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0)) - + MV78XX0_PCIE_IO_VIRT_BASE(0)); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/irqs.h b/include/asm-arm/arch-mv78xx0/irqs.h deleted file mode 100644 index 75930450cd65..000000000000 --- a/include/asm-arm/arch-mv78xx0/irqs.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/irqs.h - * - * IRQ definitions for Marvell MV78xx0 SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "mv78xx0.h" /* need GPIO_MAX */ - -/* - * MV78xx0 Low Interrupt Controller - */ -#define IRQ_MV78XX0_ERR 0 -#define IRQ_MV78XX0_SPI 1 -#define IRQ_MV78XX0_I2C_0 2 -#define IRQ_MV78XX0_I2C_1 3 -#define IRQ_MV78XX0_IDMA_0 4 -#define IRQ_MV78XX0_IDMA_1 5 -#define IRQ_MV78XX0_IDMA_2 6 -#define IRQ_MV78XX0_IDMA_3 7 -#define IRQ_MV78XX0_TIMER_0 8 -#define IRQ_MV78XX0_TIMER_1 9 -#define IRQ_MV78XX0_TIMER_2 10 -#define IRQ_MV78XX0_TIMER_3 11 -#define IRQ_MV78XX0_UART_0 12 -#define IRQ_MV78XX0_UART_1 13 -#define IRQ_MV78XX0_UART_2 14 -#define IRQ_MV78XX0_UART_3 15 -#define IRQ_MV78XX0_USB_0 16 -#define IRQ_MV78XX0_USB_1 17 -#define IRQ_MV78XX0_USB_2 18 -#define IRQ_MV78XX0_CRYPTO 19 -#define IRQ_MV78XX0_SDIO_0 20 -#define IRQ_MV78XX0_SDIO_1 21 -#define IRQ_MV78XX0_XOR_0 22 -#define IRQ_MV78XX0_XOR_1 23 -#define IRQ_MV78XX0_I2S_0 24 -#define IRQ_MV78XX0_I2S_1 25 -#define IRQ_MV78XX0_SATA 26 -#define IRQ_MV78XX0_TDMI 27 - -/* - * MV78xx0 High Interrupt Controller - */ -#define IRQ_MV78XX0_PCIE_00 32 -#define IRQ_MV78XX0_PCIE_01 33 -#define IRQ_MV78XX0_PCIE_02 34 -#define IRQ_MV78XX0_PCIE_03 35 -#define IRQ_MV78XX0_PCIE_10 36 -#define IRQ_MV78XX0_PCIE_11 37 -#define IRQ_MV78XX0_PCIE_12 38 -#define IRQ_MV78XX0_PCIE_13 39 -#define IRQ_MV78XX0_GE00_SUM 40 -#define IRQ_MV78XX0_GE00_RX 41 -#define IRQ_MV78XX0_GE00_TX 42 -#define IRQ_MV78XX0_GE00_MISC 43 -#define IRQ_MV78XX0_GE01_SUM 44 -#define IRQ_MV78XX0_GE01_RX 45 -#define IRQ_MV78XX0_GE01_TX 46 -#define IRQ_MV78XX0_GE01_MISC 47 -#define IRQ_MV78XX0_GE10_SUM 48 -#define IRQ_MV78XX0_GE10_RX 49 -#define IRQ_MV78XX0_GE10_TX 50 -#define IRQ_MV78XX0_GE10_MISC 51 -#define IRQ_MV78XX0_GE11_SUM 52 -#define IRQ_MV78XX0_GE11_RX 53 -#define IRQ_MV78XX0_GE11_TX 54 -#define IRQ_MV78XX0_GE11_MISC 55 -#define IRQ_MV78XX0_GPIO_0_7 56 -#define IRQ_MV78XX0_GPIO_8_15 57 -#define IRQ_MV78XX0_GPIO_16_23 58 -#define IRQ_MV78XX0_GPIO_24_31 59 -#define IRQ_MV78XX0_DB_IN 60 -#define IRQ_MV78XX0_DB_OUT 61 - -/* - * MV78XX0 General Purpose Pins - */ -#define IRQ_MV78XX0_GPIO_START 64 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/memory.h b/include/asm-arm/arch-mv78xx0/memory.h deleted file mode 100644 index 721a6b185b91..000000000000 --- a/include/asm-arm/arch-mv78xx0/memory.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/mv78xx0.h b/include/asm-arm/arch-mv78xx0/mv78xx0.h deleted file mode 100644 index 9f5d83c73faa..000000000000 --- a/include/asm-arm/arch-mv78xx0/mv78xx0.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/mv78xx0.h - * - * Generic definitions for Marvell MV78xx0 SoC flavors: - * MV781x0 and MV782x0. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_MV78XX0_H -#define __ASM_ARCH_MV78XX0_H - -/* - * Marvell MV78xx0 address maps. - * - * phys - * c0000000 PCIe Memory space - * f0800000 PCIe #0 I/O space - * f0900000 PCIe #1 I/O space - * f0a00000 PCIe #2 I/O space - * f0b00000 PCIe #3 I/O space - * f0c00000 PCIe #4 I/O space - * f0d00000 PCIe #5 I/O space - * f0e00000 PCIe #6 I/O space - * f0f00000 PCIe #7 I/O space - * f1000000 on-chip peripheral registers - * - * virt phys size - * fe400000 f102x000 16K core-specific peripheral registers - * fe700000 f0800000 1M PCIe #0 I/O space - * fe800000 f0900000 1M PCIe #1 I/O space - * fe900000 f0a00000 1M PCIe #2 I/O space - * fea00000 f0b00000 1M PCIe #3 I/O space - * feb00000 f0c00000 1M PCIe #4 I/O space - * fec00000 f0d00000 1M PCIe #5 I/O space - * fed00000 f0e00000 1M PCIe #6 I/O space - * fee00000 f0f00000 1M PCIe #7 I/O space - * fef00000 f1000000 1M on-chip peripheral registers - */ -#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 -#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 -#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 -#define MV78XX0_CORE_REGS_SIZE SZ_16K - -#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20)) -#define MV78XX0_PCIE_IO_SIZE SZ_1M - -#define MV78XX0_REGS_PHYS_BASE 0xf1000000 -#define MV78XX0_REGS_VIRT_BASE 0xfef00000 -#define MV78XX0_REGS_SIZE SZ_1M - -#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000 -#define MV78XX0_PCIE_MEM_SIZE 0x30000000 - -/* - * Core-specific peripheral registers. - */ -#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Register Map - */ -#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700) - -#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030) -#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) -#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200) -#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200) -#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300) -#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300) - -#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000) -#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000) - -#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000) -#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000) -#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000) -#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000) - -#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000) -#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000) -#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000) - -#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000) - -#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000) -#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000) -#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000) -#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000) - -#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) - - -#define GPIO_MAX 32 - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/system.h b/include/asm-arm/arch-mv78xx0/system.h deleted file mode 100644 index 7eb47d376db9..000000000000 --- a/include/asm-arm/arch-mv78xx0/system.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/include/asm-arm/arch-mv78xx0/timex.h b/include/asm-arm/arch-mv78xx0/timex.h deleted file mode 100644 index a854b1ccbd01..000000000000 --- a/include/asm-arm/arch-mv78xx0/timex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) diff --git a/include/asm-arm/arch-mv78xx0/uncompress.h b/include/asm-arm/arch-mv78xx0/uncompress.h deleted file mode 100644 index 3bfe0a293ef7..000000000000 --- a/include/asm-arm/arch-mv78xx0/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-mv78xx0/vmalloc.h b/include/asm-arm/arch-mv78xx0/vmalloc.h deleted file mode 100644 index f2c512197579..000000000000 --- a/include/asm-arm/arch-mv78xx0/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-mv78xx0/vmalloc.h - */ - -#define VMALLOC_END 0xfe000000 diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h deleted file mode 100644 index 61e66dac90ef..000000000000 --- a/include/asm-arm/arch-mxc/board-mx27ads.h +++ /dev/null @@ -1,354 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ - -/* external interrupt multiplexer */ -#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES) - -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* - * MXC UART EVB board level configurations - */ - -#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000) -#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000) -#define MXC_LL_EXTUART_16BIT_BUS - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) - -/* - * @name Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M - -/* - * PBC Controller parameters - */ - -/* - * Base address of PBC controller, CS4 - */ -#define PBC_BASE_ADDRESS 0xEB000000 -#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) - -/* - * PBC Interupt name definitions - */ -#define PBC_GPIO1_0 0 -#define PBC_GPIO1_1 1 -#define PBC_GPIO1_2 2 -#define PBC_GPIO1_3 3 -#define PBC_GPIO1_4 4 -#define PBC_GPIO1_5 5 - -#define PBC_INTR_MAX_NUM 6 -#define PBC_INTR_SHARED_MAX_NUM 8 - -/* When the PBC address connection is fixed in h/w, defined as 1 */ -#define PBC_ADDR_SH 0 - -/* Offsets for the PBC Controller register */ -/* - * PBC Board version register offset - */ -#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 set address. - */ -#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) -/* - * PBC Board control register 1 clear address. - */ -#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) -/* - * PBC Board control register 2 set address. - */ -#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) -/* - * PBC Board control register 2 clear address. - */ -#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) -/* - * PBC Board control register 3 clear address. - */ -#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) -/* - * PBC Board control register 3 set address. - */ -#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) -/* - * PBC Board control register 4 clear address. - */ -#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) -/*PBC_ADDR_SH - * PBC Board status register 1. - */ -#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) -/* - * PBC Board interrupt status register. - */ -#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) -/* - * PBC Board interrupt current status register. - */ -#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register set address. - */ -#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) -/* - * PBC Interrupt mask register clear address. - */ -#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) -/* - * External UART A. - */ -#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Status. - */ -#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Set. - */ -#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) -/* - * UART 4 Expanding Signal Control Clear. - */ -#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) -/* - * Ethernet Controller IO base address. - */ -#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) -/* - * Ethernet Controller Memory base address. - */ -#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) -/* - * Ethernet Controller DMA base address. - */ -#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) - -/* PBC Board Version Register bit definition */ -#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ -#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ - -/* PBC Board Control Register 1 bit definitions */ -#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ -#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ -#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ -#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ -#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ - -/* PBC Board Control Register 2 bit definitions */ -#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ -#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ -#define PBC_BCTRL2_ATAFEC_EN 0X0010 -#define PBC_BCTRL2_ATAFEC_SEL 0X0020 -#define PBC_BCTRL2_ATA_EN 0X0040 -#define PBC_BCTRL2_IRDA_SD 0X0080 -#define PBC_BCTRL2_IRDA_EN 0X0100 -#define PBC_BCTRL2_CCTL10 0X0200 -#define PBC_BCTRL2_CCTL11 0X0400 - -/* PBC Board Control Register 3 bit definitions */ -#define PBC_BCTRL3_HSH_EN 0X0020 -#define PBC_BCTRL3_FSH_MOD 0X0040 -#define PBC_BCTRL3_OTG_HS_EN 0X0080 -#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 -#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 -#define PBC_BCTRL3_USB_OTG_ON 0X0800 -#define PBC_BCTRL3_USB_FSH_ON 0X1000 - -/* PBC Board Control Register 4 bit definitions */ -#define PBC_BCTRL4_REGEN_SEL 0X0001 -#define PBC_BCTRL4_USER_OFF 0X0002 -#define PBC_BCTRL4_VIB_EN 0X0004 -#define PBC_BCTRL4_PWRGT1_EN 0X0008 -#define PBC_BCTRL4_PWRGT2_EN 0X0010 -#define PBC_BCTRL4_STDBY_PRI 0X0020 - -#ifndef __ASSEMBLY__ -/* - * Enumerations for SD cards and memory stick card. This corresponds to - * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. - */ -enum mxc_card_no { - MXC_CARD_SD2 = 0, - MXC_CARD_SD3, - MXC_CARD_MS, - MXC_CARD_SD1, - MXC_CARD_MIN = MXC_CARD_SD2, - MXC_CARD_MAX = MXC_CARD_SD1, -}; -#endif - -#define MXC_CPLD_VER_1_50 0x01 - -/* - * PBC BSTAT Register bit definitions - */ -#define PBC_BSTAT_PRI_INT 0X0001 -#define PBC_BSTAT_USB_BYP 0X0002 -#define PBC_BSTAT_ATA_IOCS16 0X0004 -#define PBC_BSTAT_ATA_CBLID 0X0008 -#define PBC_BSTAT_ATA_DASP 0X0010 -#define PBC_BSTAT_PWR_RDY 0X0020 -#define PBC_BSTAT_SD3_WP 0X0100 -#define PBC_BSTAT_SD2_WP 0X0200 -#define PBC_BSTAT_SD1_WP 0X0400 -#define PBC_BSTAT_SD3_DET 0X0800 -#define PBC_BSTAT_SD2_DET 0X1000 -#define PBC_BSTAT_SD1_DET 0X2000 -#define PBC_BSTAT_MS_DET 0X4000 -#define PBC_BSTAT_SD3_DET_BIT 11 -#define PBC_BSTAT_SD2_DET_BIT 12 -#define PBC_BSTAT_SD1_DET_BIT 13 -#define PBC_BSTAT_MS_DET_BIT 14 -#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ - ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ - ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ - ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ - 0x0)))) - -/* - * PBC UART Control Register bit definitions - */ -#define PBC_UCTRL_DCE_DCD 0X0001 -#define PBC_UCTRL_DCE_DSR 0X0002 -#define PBC_UCTRL_DCE_RI 0X0004 -#define PBC_UCTRL_DTE_DTR 0X0100 - -/* - * PBC UART Status Register bit definitions - */ -#define PBC_USTAT_DTE_DCD 0X0001 -#define PBC_USTAT_DTE_DSR 0X0002 -#define PBC_USTAT_DTE_RI 0X0004 -#define PBC_USTAT_DCE_DTR 0X0100 - -/* - * PBC Interupt mask register bit definitions - */ -#define PBC_INTR_SD3_R_EN_BIT 4 -#define PBC_INTR_SD2_R_EN_BIT 0 -#define PBC_INTR_SD1_R_EN_BIT 6 -#define PBC_INTR_MS_R_EN_BIT 5 -#define PBC_INTR_SD3_EN_BIT 13 -#define PBC_INTR_SD2_EN_BIT 12 -#define PBC_INTR_MS_EN_BIT 14 -#define PBC_INTR_SD1_EN_BIT 15 - -#define PBC_INTR_SD2_R_EN 0x0001 -#define PBC_INTR_LOW_BAT 0X0002 -#define PBC_INTR_OTG_FSOVER 0X0004 -#define PBC_INTR_FSH_OVER 0X0008 -#define PBC_INTR_SD3_R_EN 0x0010 -#define PBC_INTR_MS_R_EN 0x0020 -#define PBC_INTR_SD1_R_EN 0x0040 -#define PBC_INTR_FEC_INT 0X0080 -#define PBC_INTR_ENET_INT 0X0100 -#define PBC_INTR_OTGFS_INT 0X0200 -#define PBC_INTR_XUART_INT 0X0400 -#define PBC_INTR_CCTL12 0X0800 -#define PBC_INTR_SD2_EN 0x1000 -#define PBC_INTR_SD3_EN 0x2000 -#define PBC_INTR_MS_EN 0x4000 -#define PBC_INTR_SD1_EN 0x8000 - - - -/* For interrupts like xuart, enet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) -#define MXC_MAX_EXP_IO_LINES 16 - -/* - * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. - * - */ -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) - -/* - * This is System IRQ used by CS8900A for interrupt generation - * taken from platform.h - */ -#define CS8900AIRQ EXPIO_INT_ENET_INT -/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ -#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) - -#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) - -/* -* This is used to detect if the CPLD version is for mx27 evb board rev-a -*/ -#define PBC_CPLD_VERSION_IS_REVA() \ - ((__raw_readw(PBC_VERSION_REG) & \ - (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ - == 0) - -/* This is used to active or inactive ata signal in CPLD . - * It is dependent with hardware - */ -#define PBC_ATA_SIGNAL_ACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_CLEAR_REG) - -#define PBC_ATA_SIGNAL_INACTIVE() \ - __raw_writew( \ - PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ - PBC_BCTRL2_SET_REG) - -#define MXC_BD_LED1 (1 << 5) -#define MXC_BD_LED2 (1 << 6) -#define MXC_BD_LED_ON(led) \ - __raw_writew(led, PBC_BCTRL1_SET_REG) -#define MXC_BD_LED_OFF(led) \ - __raw_writew(led, PBC_BCTRL1_CLEAR_REG) - -/* to determine the correct external crystal reference */ -#define CKIH_27MHZ_BIT_SET (1 << 3) - -#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h deleted file mode 100644 index 1bc6fb0f9a83..000000000000 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ - -/* Base address of PBC controller */ -#define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) -/* Offsets for the PBC Controller register */ - -/* PBC Board status register offset */ -#define PBC_BSTAT 0x000002 - -/* PBC Board control register 1 set address */ -#define PBC_BCTRL1_SET 0x000004 - -/* PBC Board control register 1 clear address */ -#define PBC_BCTRL1_CLEAR 0x000006 - -/* PBC Board control register 2 set address */ -#define PBC_BCTRL2_SET 0x000008 - -/* PBC Board control register 2 clear address */ -#define PBC_BCTRL2_CLEAR 0x00000A - -/* PBC Board control register 3 set address */ -#define PBC_BCTRL3_SET 0x00000C - -/* PBC Board control register 3 clear address */ -#define PBC_BCTRL3_CLEAR 0x00000E - -/* PBC Board control register 4 set address */ -#define PBC_BCTRL4_SET 0x000010 - -/* PBC Board control register 4 clear address */ -#define PBC_BCTRL4_CLEAR 0x000012 - -/* PBC Board status register 1 */ -#define PBC_BSTAT1 0x000014 - -/* PBC Board interrupt status register */ -#define PBC_INTSTATUS 0x000016 - -/* PBC Board interrupt current status register */ -#define PBC_INTCURR_STATUS 0x000018 - -/* PBC Interrupt mask register set address */ -#define PBC_INTMASK_SET 0x00001A - -/* PBC Interrupt mask register clear address */ -#define PBC_INTMASK_CLEAR 0x00001C - -/* External UART A */ -#define PBC_SC16C652_UARTA 0x010000 - -/* External UART B */ -#define PBC_SC16C652_UARTB 0x010010 - -/* Ethernet Controller IO base address */ -#define PBC_CS8900A_IOBASE 0x020000 - -/* Ethernet Controller Memory base address */ -#define PBC_CS8900A_MEMBASE 0x021000 - -/* Ethernet Controller DMA base address */ -#define PBC_CS8900A_DMABASE 0x022000 - -/* External chip select 0 */ -#define PBC_XCS0 0x040000 - -/* LCD Display enable */ -#define PBC_LCD_EN_B 0x060000 - -/* Code test debug enable */ -#define PBC_CODE_B 0x070000 - -/* PSRAM memory select */ -#define PBC_PSRAM_B 0x5000000 - -#define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) -#define PBC_INTCURR_STATUS_REG (PBC_INTCURR_STATUS + PBC_BASE_ADDRESS) -#define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) -#define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) - -#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 0) -#define EXPIO_INT_PB_IRQ (MXC_EXP_IO_BASE + 1) -#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) -#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) -#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) -#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) -#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) -#define EXPIO_INT_RES7 (MXC_EXP_IO_BASE + 7) -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) -#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) -#define EXPIO_INT_SYNTH_IRQ (MXC_EXP_IO_BASE + 12) -#define EXPIO_INT_CE_INT1 (MXC_EXP_IO_BASE + 13) -#define EXPIO_INT_CE_INT2 (MXC_EXP_IO_BASE + 14) -#define EXPIO_INT_RES15 (MXC_EXP_IO_BASE + 15) - -#define MXC_MAX_EXP_IO_LINES 16 - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h deleted file mode 100644 index e4e5cf5ad7db..000000000000 --- a/include/asm-arm/arch-mxc/board-mx31lite.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ -#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ - -#define MXC_MAX_EXP_IO_LINES 16 - - -/* - * Memory Size parameters - */ - -/* - * Size of SDRAM memory - */ -#define SDRAM_MEM_SIZE SZ_128M -/* - * Size of MBX buffer memory - */ -#define MXC_MBX_MEM_SIZE SZ_16M -/* - * Size of memory available to kernel - */ -#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ - diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h deleted file mode 100644 index 82232ba3c8fc..000000000000 --- a/include/asm-arm/arch-mxc/board-pcm037.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ -#define __ASM_ARCH_MXC_BOARD_PCM037_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) - -#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h deleted file mode 100644 index 750c62afd90f..000000000000 --- a/include/asm-arm/arch-mxc/board-pcm038.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ -#define __ASM_ARCH_MXC_BOARD_PCM038_H__ - -/* mandatory for CONFIG_LL_DEBUG */ - -#define MXC_LL_UART_PADDR UART1_BASE_ADDR -#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside pcm038_init(). - * - * This example here is for the development board. Refer pcm970-baseboard.c - */ - -extern void pcm970_baseboard_init(void); - -#endif - -#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h deleted file mode 100644 index 24caa2b7c91d..000000000000 --- a/include/asm-arm/arch-mxc/clock.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_CLOCK_H__ -#define __ASM_ARCH_MXC_CLOCK_H__ - -#ifndef __ASSEMBLY__ -#include - -struct module; - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - int id; - /* Source clock this clk depends on */ - struct clk *parent; - /* Secondary clock to enable/disable with this clock */ - struct clk *secondary; - /* Reference count of clock enable/disable */ - __s8 usecount; - /* Register bit position for clock's enable/disable control. */ - u8 enable_shift; - /* Register address for clock's enable/disable control. */ - u32 enable_reg; - u32 flags; - /* get the current clock rate (always a fresh value) */ - unsigned long (*get_rate) (struct clk *); - /* Function ptr to set the clock to a new rate. The rate must match a - supported rate returned from round_rate. Leave blank if clock is not - programmable */ - int (*set_rate) (struct clk *, unsigned long); - /* Function ptr to round the requested clock rate to the nearest - supported rate that is less than or equal to the requested rate. */ - unsigned long (*round_rate) (struct clk *, unsigned long); - /* Function ptr to enable the clock. Leave blank if clock can not - be gated. */ - int (*enable) (struct clk *); - /* Function ptr to disable the clock. Leave blank if clock can not - be gated. */ - void (*disable) (struct clk *); - /* Function ptr to set the parent clock of the clock. */ - int (*set_parent) (struct clk *, struct clk *); -}; - -int clk_register(struct clk *clk); -void clk_unregister(struct clk *clk); - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h deleted file mode 100644 index a6d2e24aab15..000000000000 --- a/include/asm-arm/arch-mxc/common.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_COMMON_H__ -#define __ASM_ARCH_MXC_COMMON_H__ - -extern void mxc_map_io(void); -extern void mxc_init_irq(void); -extern void mxc_timer_init(const char *clk_timer); -extern int mxc_clocks_init(unsigned long fref); -extern int mxc_register_gpios(void); - -#endif diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S deleted file mode 100644 index 575087f8561a..000000000000 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/include/asm-arm/arch-imx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -#ifdef CONFIG_MACH_MX31ADS -#include -#endif -#ifdef CONFIG_MACH_PCM037 -#include -#endif -#ifdef CONFIG_MACH_MX31LITE -#include -#endif -#ifdef CONFIG_MACH_MX27ADS -#include -#endif -#ifdef CONFIG_MACH_PCM038 -#include -#endif - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MXC_LL_UART_PADDR @ physical - ldrne \rx, =MXC_LL_UART_VADDR @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0x40] @ TXDATA - .endm - - .macro waituart,rd,rx - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x98] @ SR2 - tst \rd, #1 << 3 @ TXDC - beq 1002b @ wait until transmit done - .endm diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h deleted file mode 100644 index c822d569a05e..000000000000 --- a/include/asm-arm/arch-mxc/dma.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_DMA_H__ -#define __ASM_ARCH_MXC_DMA_H__ - -#endif diff --git a/include/asm-arm/arch-mxc/entry-macro.S b/include/asm-arm/arch-mxc/entry-macro.S deleted file mode 100644 index b542433afb1b..000000000000 --- a/include/asm-arm/arch-mxc/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2007 Lennert Buytenhek - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - @ this macro disables fast irq (not implemented) - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - @ this macro checks which interrupt occured - @ and returns its number in irqnr - @ and returns if an interrupt occured in irqstat - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR) - @ Load offset & priority of the highest priority - @ interrupt pending from AVIC_NIVECSR - ldr \irqstat, [\base, #0x40] - @ Shift to get the decoded IRQ number, using ASR so - @ 'no interrupt pending' becomes 0xffffffff - mov \irqnr, \irqstat, asr #16 - @ set zero flag if IRQ + 1 == 0 - adds \tmp, \irqnr, #1 - .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h deleted file mode 100644 index 5f13a65e4044..000000000000 --- a/include/asm-arm/arch-mxc/gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_GPIO_H__ -#define __ASM_ARCH_MXC_GPIO_H__ - -#include -#include - -/* use gpiolib dispatchers */ -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio)) -#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES) - -struct mxc_gpio_port { - void __iomem *base; - int irq; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxc_gpio_init(struct mxc_gpio_port*, int); - -#endif diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h deleted file mode 100644 index 37cddbaaade7..000000000000 --- a/include/asm-arm/arch-mxc/hardware.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#define __ASM_ARCH_MXC_HARDWARE_H__ - -#include - -#ifdef CONFIG_ARCH_MX3 -# include -#endif - -#ifdef CONFIG_ARCH_MX2 -# ifdef CONFIG_MACH_MX27 -# include -# endif -#endif - -#include - -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h deleted file mode 100644 index 315bffadafda..000000000000 --- a/include/asm-arm/arch-mxc/iim.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_IIM_H__ -#define __ASM_ARCH_MXC_IIM_H__ - -/* Register offsets */ -#define MXC_IIMSTAT 0x0000 -#define MXC_IIMSTATM 0x0004 -#define MXC_IIMERR 0x0008 -#define MXC_IIMEMASK 0x000C -#define MXC_IIMFCTL 0x0010 -#define MXC_IIMUA 0x0014 -#define MXC_IIMLA 0x0018 -#define MXC_IIMSDAT 0x001C -#define MXC_IIMPREV 0x0020 -#define MXC_IIMSREV 0x0024 -#define MXC_IIMPRG_P 0x0028 -#define MXC_IIMSCS0 0x002C -#define MXC_IIMSCS1 0x0030 -#define MXC_IIMSCS2 0x0034 -#define MXC_IIMSCS3 0x0038 -#define MXC_IIMFBAC0 0x0800 -#define MXC_IIMJAC 0x0804 -#define MXC_IIMHWV1 0x0808 -#define MXC_IIMHWV2 0x080C -#define MXC_IIMHAB0 0x0810 -#define MXC_IIMHAB1 0x0814 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMMAC 0x0814 -#define MXC_IIMPREV_FUSE 0x0818 -#define MXC_IIMSREV_FUSE 0x081C -#define MXC_IIMSJC_CHALL_0 0x0820 -#define MXC_IIMSJC_CHALL_7 0x083C -#define MXC_IIMFB0UC17 0x0840 -#define MXC_IIMFB0UC255 0x0BFC -#define MXC_IIMFBAC1 0x0C00 -/* Definitions for i.MX27 TO2 */ -#define MXC_IIMSUID 0x0C04 -#define MXC_IIMKEY0 0x0C04 -#define MXC_IIMKEY20 0x0C54 -#define MXC_IIMSJC_RESP_0 0x0C58 -#define MXC_IIMSJC_RESP_7 0x0C74 -#define MXC_IIMFB1UC30 0x0C78 -#define MXC_IIMFB1UC255 0x0FFC - -/* Bit definitions */ - -#define MXC_IIMHWV1_WLOCK (0x1 << 7) -#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) -#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) -#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) -#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) -#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) -#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) - -#define MXC_IIMHWV2_WLOCK (0x1 << 7) -#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) -#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) - -#endif /* __ASM_ARCH_MXC_IIM_H__ */ diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h deleted file mode 100644 index 83fb72c4048a..000000000000 --- a/include/asm-arm/arch-mxc/imx-uart.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef ASMARM_ARCH_UART_H -#define ASMARM_ARCH_UART_H - -#define IMXUART_HAVE_RTSCTS (1<<0) - -struct imxuart_platform_data { - int (*init)(struct platform_device *pdev); - int (*exit)(struct platform_device *pdev); - unsigned int flags; -}; - -int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); - -#endif diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h deleted file mode 100644 index 65b6810124c1..000000000000 --- a/include/asm-arm/arch-mxc/io.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IO_H__ -#define __ASM_ARCH_MXC_IO_H__ - -/* Allow IO space to be anywhere in the memory */ -#define IO_SPACE_LIMIT 0xffffffff - -/* io address mapping macro */ -#define __io(a) ((void __iomem *)(a)) - -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h deleted file mode 100644 index 076d37b38eb2..000000000000 --- a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef _MXC_GPIO_MX1_MX2_H -#define _MXC_GPIO_MX1_MX2_H - -#include - -#define MXC_GPIO_ALLOC_MODE_NORMAL 0 -#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1 -#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2 -#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4 -#define MXC_GPIO_ALLOC_MODE_RELEASE 8 - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) -#define MXC_DDIR(x) (0x00 + ((x) << 8)) -#define MXC_OCR1(x) (0x04 + ((x) << 8)) -#define MXC_OCR2(x) (0x08 + ((x) << 8)) -#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) -#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) -#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) -#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) -#define MXC_DR(x) (0x1c + ((x) << 8)) -#define MXC_GIUS(x) (0x20 + ((x) << 8)) -#define MXC_SSR(x) (0x24 + ((x) << 8)) -#define MXC_ICR1(x) (0x28 + ((x) << 8)) -#define MXC_ICR2(x) (0x2c + ((x) << 8)) -#define MXC_IMR(x) (0x30 + ((x) << 8)) -#define MXC_ISR(x) (0x34 + ((x) << 8)) -#define MXC_GPR(x) (0x38 + ((x) << 8)) -#define MXC_SWR(x) (0x3c + ((x) << 8)) -#define MXC_PUEN(x) (0x40 + ((x) << 8)) - -#ifdef CONFIG_ARCH_MX1 -# define GPIO_PORT_MAX 3 -#endif -#ifdef CONFIG_ARCH_MX2 -# define GPIO_PORT_MAX 5 -#endif - -#ifndef GPIO_PORT_MAX -# error "GPIO config port count unknown!" -#endif - -#define GPIO_PIN_MASK 0x1f - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) - -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) - -#define GPIO_OUT (1 << 8) -#define GPIO_IN (0 << 8) -#define GPIO_PUEN (1 << 9) - -#define GPIO_PF (1 << 10) -#define GPIO_AF (1 << 11) - -#define GPIO_OCR_SHIFT 12 -#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) -#define GPIO_AIN (0 << GPIO_OCR_SHIFT) -#define GPIO_BIN (1 << GPIO_OCR_SHIFT) -#define GPIO_CIN (2 << GPIO_OCR_SHIFT) -#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) - -#define GPIO_AOUT_SHIFT 14 -#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) -#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) - -#define GPIO_BOUT_SHIFT 16 -#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) -#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) - -extern void mxc_gpio_mode(int gpio_mode); -extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, - int alloc_mode, const char *label); - -/*-------------------------------------------------------------------------*/ - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#ifdef CONFIG_ARCH_MX1 -#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) -#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) -#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) -#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) -#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) -#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) -#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31) -#endif - -#ifdef CONFIG_ARCH_MX2 -#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) -#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) -#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) -#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) -#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) -#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) -#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) -#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) -#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) -#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) -#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) -#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) -#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) -#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) -#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) -#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) -#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) -#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) -#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) -#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) -#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) -#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) -#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) -#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) -#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) -#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) -#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) -#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) -#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) -#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) -#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) -#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) -#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) -#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) -#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) -#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) -#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) -#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) -#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) -#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) -#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) -#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) -#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) -#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) -#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) -#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) -#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) -#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) -#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) -#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) -#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) -#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) -#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) -#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) -#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) -#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) -#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) -#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) -#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) -#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) -#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) -#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) -#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) -#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) -#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) -#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) -#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) -#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) -#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) -#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) -#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) -#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) -#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) -#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) -#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) -#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) -#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) -#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) -#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) -#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) -#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) -#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) -#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) -#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) -#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) -#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) -#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) -#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) -#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) -#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) -#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) -#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) -#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) -#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) -#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) -#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) -#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) -#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) -#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) -#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) -#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) -#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) -#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) -#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) -#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) -#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) -#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) -#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) -#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) -#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) -#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) -#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) -#endif - -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5) - -#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) - -#endif /* _MXC_GPIO_MX1_MX2_H */ diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h deleted file mode 100644 index 7509e7692f08..000000000000 --- a/include/asm-arm/arch-mxc/iomux-mx3.h +++ /dev/null @@ -1,501 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MX31_IOMUX_H__ -#define __MACH_MX31_IOMUX_H__ - -#include - -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * various IOMUX pad functions - */ -enum iomux_pad_config { - PAD_CTL_NOLOOPBACK = 0x0 << 9, - PAD_CTL_LOOPBACK = 0x1 << 9, - PAD_CTL_PKE_NONE = 0x0 << 8, - PAD_CTL_PKE_ENABLE = 0x1 << 8, - PAD_CTL_PUE_KEEPER = 0x0 << 7, - PAD_CTL_PUE_PUD = 0x1 << 7, - PAD_CTL_100K_PD = 0x0 << 5, - PAD_CTL_100K_PU = 0x1 << 5, - PAD_CTL_47K_PU = 0x2 << 5, - PAD_CTL_22K_PU = 0x3 << 5, - PAD_CTL_HYS_CMOS = 0x0 << 4, - PAD_CTL_HYS_SCHMITZ = 0x1 << 4, - PAD_CTL_ODE_CMOS = 0x0 << 3, - PAD_CTL_ODE_OpenDrain = 0x1 << 3, - PAD_CTL_DRV_NORMAL = 0x0 << 1, - PAD_CTL_DRV_HIGH = 0x1 << 1, - PAD_CTL_DRV_MAX = 0x2 << 1, - PAD_CTL_SRE_SLOW = 0x0 << 0, - PAD_CTL_SRE_FAST = 0x1 << 0 -}; - -/* - * various IOMUX general purpose functions - */ -enum iomux_gp_func { - MUX_PGP_FIRI = 1 << 0, - MUX_DDR_MODE = 1 << 1, - MUX_PGP_CSPI_BB = 1 << 2, - MUX_PGP_ATA_1 = 1 << 3, - MUX_PGP_ATA_2 = 1 << 4, - MUX_PGP_ATA_3 = 1 << 5, - MUX_PGP_ATA_4 = 1 << 6, - MUX_PGP_ATA_5 = 1 << 7, - MUX_PGP_ATA_6 = 1 << 8, - MUX_PGP_ATA_7 = 1 << 9, - MUX_PGP_ATA_8 = 1 << 10, - MUX_PGP_UH2 = 1 << 11, - MUX_SDCTL_CSD0_SEL = 1 << 12, - MUX_SDCTL_CSD1_SEL = 1 << 13, - MUX_CSPI1_UART3 = 1 << 14, - MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, - MUX_TAMPER_DETECT_EN = 1 << 16, - MUX_PGP_USB_4WIRE = 1 << 17, - MUX_PGB_USB_COMMON = 1 << 18, - MUX_SDHC_MEMSTICK1 = 1 << 19, - MUX_SDHC_MEMSTICK2 = 1 << 20, - MUX_PGP_SPLL_BYP = 1 << 21, - MUX_PGP_UPLL_BYP = 1 << 22, - MUX_PGP_MSHC1_CLK_SEL = 1 << 23, - MUX_PGP_MSHC2_CLK_SEL = 1 << 24, - MUX_CSPI3_UART5_SEL = 1 << 25, - MUX_PGP_ATA_9 = 1 << 26, - MUX_PGP_USB_SUSPEND = 1 << 27, - MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, - MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, - MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, - MUX_CLKO_DDR_MODE = 1 << 31, -}; - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void iomux_config_gpr(enum iomux_gp_func , bool); - -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - */ -void mxc_iomux_set_gpr(enum iomux_gp_func, bool); - -#define IOMUX_PADNUM_MASK 0x1ff -#define IOMUX_GPIONUM_SHIFT 9 -#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) -#define IOMUX_MODE_SHIFT 17 -#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) - -#define IOMUX_PIN(gpionum, padnum) \ - (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ - (padnum & IOMUX_PADNUM_MASK)) - -#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) - -#define IOMUX_TO_GPIO(iomux_pin) \ - ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) -#define IOMUX_TO_IRQ(iomux_pin) \ - (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ - MXC_GPIO_INT_BASE) - -/* - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ - -enum iomux_pins { - MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), - MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), - MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), - MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), - MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), - MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), - MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), - MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), - MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), - MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), - MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), - MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), - MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), - MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), - MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), - MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), - MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), - MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), - MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), - MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), - MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), - MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), - MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), - MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), - MX31_PIN_READ = IOMUX_PIN(0xff, 24), - MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), - MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), - MX31_PIN_SER_RS = IOMUX_PIN(89, 27), - MX31_PIN_LCS1 = IOMUX_PIN(88, 28), - MX31_PIN_LCS0 = IOMUX_PIN(87, 29), - MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), - MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), - MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), - MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), - MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), - MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), - MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), - MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), - MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), - MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), - MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), - MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), - MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), - MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), - MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), - MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), - MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), - MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), - MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), - MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), - MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), - MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), - MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), - MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), - MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), - MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), - MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), - MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), - MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), - MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), - MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), - MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), - MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), - MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), - MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), - MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), - MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), - MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), - MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), - MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), - MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), - MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), - MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), - MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), - MX31_PIN_USB_OC = IOMUX_PIN(30, 74), - MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), - MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), - MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), - MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), - MX31_PIN_TDO = IOMUX_PIN(0xff, 79), - MX31_PIN_TDI = IOMUX_PIN(0xff, 80), - MX31_PIN_TMS = IOMUX_PIN(0xff, 81), - MX31_PIN_TCK = IOMUX_PIN(0xff, 82), - MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), - MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), - MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), - MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), - MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), - MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), - MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), - MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), - MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), - MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), - MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), - MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), - MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), - MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), - MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), - MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), - MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), - MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), - MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), - MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), - MX31_PIN_TXD2 = IOMUX_PIN(28, 103), - MX31_PIN_RXD2 = IOMUX_PIN(27, 104), - MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), - MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), - MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), - MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), - MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), - MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), - MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), - MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), - MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), - MX31_PIN_CTS1 = IOMUX_PIN(39, 114), - MX31_PIN_RTS1 = IOMUX_PIN(38, 115), - MX31_PIN_TXD1 = IOMUX_PIN(37, 116), - MX31_PIN_RXD1 = IOMUX_PIN(36, 117), - MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), - MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), - MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), - MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), - MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), - MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), - MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), - MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), - MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), - MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), - MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), - MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), - MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), - MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), - MX31_PIN_SFS6 = IOMUX_PIN(26, 132), - MX31_PIN_SCK6 = IOMUX_PIN(25, 133), - MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), - MX31_PIN_STXD6 = IOMUX_PIN(23, 135), - MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), - MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), - MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), - MX31_PIN_STXD5 = IOMUX_PIN(21, 139), - MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), - MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), - MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), - MX31_PIN_STXD4 = IOMUX_PIN(19, 143), - MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), - MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), - MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), - MX31_PIN_STXD3 = IOMUX_PIN(17, 147), - MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), - MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), - MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), - MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), - MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), - MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), - MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), - MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), - MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), - MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), - MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), - MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), - MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), - MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), - MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), - MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), - MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), - MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), - MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), - MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), - MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), - MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), - MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), - MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), - MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), - MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), - MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), - MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), - MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), - MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), - MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), - MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), - MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), - MX31_PIN_D0 = IOMUX_PIN(0xff, 181), - MX31_PIN_D1 = IOMUX_PIN(0xff, 182), - MX31_PIN_D2 = IOMUX_PIN(0xff, 183), - MX31_PIN_D3 = IOMUX_PIN(0xff, 184), - MX31_PIN_D4 = IOMUX_PIN(0xff, 185), - MX31_PIN_D5 = IOMUX_PIN(0xff, 186), - MX31_PIN_D6 = IOMUX_PIN(0xff, 187), - MX31_PIN_D7 = IOMUX_PIN(0xff, 188), - MX31_PIN_D8 = IOMUX_PIN(0xff, 189), - MX31_PIN_D9 = IOMUX_PIN(0xff, 190), - MX31_PIN_D10 = IOMUX_PIN(0xff, 191), - MX31_PIN_D11 = IOMUX_PIN(0xff, 192), - MX31_PIN_D12 = IOMUX_PIN(0xff, 193), - MX31_PIN_D13 = IOMUX_PIN(0xff, 194), - MX31_PIN_D14 = IOMUX_PIN(0xff, 195), - MX31_PIN_D15 = IOMUX_PIN(0xff, 196), - MX31_PIN_NFRB = IOMUX_PIN(16, 197), - MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), - MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), - MX31_PIN_NFCLE = IOMUX_PIN(13, 200), - MX31_PIN_NFALE = IOMUX_PIN(12, 201), - MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), - MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), - MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), - MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), - MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), - MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), - MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), - MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), - MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), - MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), - MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), - MX31_PIN_CAS = IOMUX_PIN(0xff, 213), - MX31_PIN_RAS = IOMUX_PIN(0xff, 214), - MX31_PIN_RW = IOMUX_PIN(0xff, 215), - MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), - MX31_PIN_LBA = IOMUX_PIN(0xff, 217), - MX31_PIN_ECB = IOMUX_PIN(0xff, 218), - MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), - MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), - MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), - MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), - MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), - MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), - MX31_PIN_OE = IOMUX_PIN(0xff, 225), - MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), - MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), - MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), - MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), - MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), - MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), - MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), - MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), - MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), - MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), - MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), - MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), - MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), - MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), - MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), - MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), - MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), - MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), - MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), - MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), - MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), - MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), - MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), - MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), - MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), - MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), - MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), - MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), - MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), - MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), - MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), - MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), - MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), - MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), - MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), - MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), - MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), - MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), - MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), - MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), - MX31_PIN_A25 = IOMUX_PIN(0xff, 266), - MX31_PIN_A24 = IOMUX_PIN(0xff, 267), - MX31_PIN_A23 = IOMUX_PIN(0xff, 268), - MX31_PIN_A22 = IOMUX_PIN(0xff, 269), - MX31_PIN_A21 = IOMUX_PIN(0xff, 270), - MX31_PIN_A20 = IOMUX_PIN(0xff, 271), - MX31_PIN_A19 = IOMUX_PIN(0xff, 272), - MX31_PIN_A18 = IOMUX_PIN(0xff, 273), - MX31_PIN_A17 = IOMUX_PIN(0xff, 274), - MX31_PIN_A16 = IOMUX_PIN(0xff, 275), - MX31_PIN_A14 = IOMUX_PIN(0xff, 276), - MX31_PIN_A15 = IOMUX_PIN(0xff, 277), - MX31_PIN_A13 = IOMUX_PIN(0xff, 278), - MX31_PIN_A12 = IOMUX_PIN(0xff, 279), - MX31_PIN_A11 = IOMUX_PIN(0xff, 280), - MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), - MX31_PIN_A10 = IOMUX_PIN(0xff, 282), - MX31_PIN_A9 = IOMUX_PIN(0xff, 283), - MX31_PIN_A8 = IOMUX_PIN(0xff, 284), - MX31_PIN_A7 = IOMUX_PIN(0xff, 285), - MX31_PIN_A6 = IOMUX_PIN(0xff, 286), - MX31_PIN_A5 = IOMUX_PIN(0xff, 287), - MX31_PIN_A4 = IOMUX_PIN(0xff, 288), - MX31_PIN_A3 = IOMUX_PIN(0xff, 289), - MX31_PIN_A2 = IOMUX_PIN(0xff, 290), - MX31_PIN_A1 = IOMUX_PIN(0xff, 291), - MX31_PIN_A0 = IOMUX_PIN(0xff, 292), - MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), - MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), - MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), - MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), - MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), - MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), - MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), - MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), - MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), - MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), - MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), - MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), - MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), - MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), - MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), - MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), - MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), - MX31_PIN_SRX0 = IOMUX_PIN(34, 310), - MX31_PIN_STX0 = IOMUX_PIN(33, 311), - MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), - MX31_PIN_SRST0 = IOMUX_PIN(67, 313), - MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), - MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), - MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), - MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), - MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), - MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), - MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), - MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), - MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), - MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), - MX31_PIN_PWMO = IOMUX_PIN( 9, 324), - MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), - MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), - MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), -}; - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MX31_PIN_(pin name)__(function) - */ -#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) -#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) -#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins, u32); - -#endif - diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h deleted file mode 100644 index 21411efc10fb..000000000000 --- a/include/asm-arm/arch-mxc/irqs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_IRQS_H__ -#define __ASM_ARCH_MXC_IRQS_H__ - -#include - -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h deleted file mode 100644 index 7e669ee0d634..000000000000 --- a/include/asm-arm/arch-mxc/memory.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MEMORY_H__ -#define __ASM_ARCH_MXC_MEMORY_H__ - -#include - -/* - * Virtual view <-> DMA view memory address translations - * This macro is used to translate the virtual address to an address - * suitable to be passed to set_dma_addr() - */ -#define __virt_to_bus(a) __virt_to_phys(a) - -/* - * Used to convert an address for DMA operations to an address that the - * kernel can use. - */ -#define __bus_to_virt(a) __phys_to_virt(a) - -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h deleted file mode 100644 index 212ecc246626..000000000000 --- a/include/asm-arm/arch-mxc/mx27.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_MX27_H__ -#define __ASM_ARCH_MXC_MX27_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* IRAM */ -#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ - -/* Register offests */ -#define AIPI_BASE_ADDR 0x10000000 -#define AIPI_BASE_ADDR_VIRT 0xF4000000 -#define AIPI_SIZE SZ_1M - -#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) -#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) -#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) -#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) -#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) -#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) -#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) -#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) -#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) -#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) -#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) -#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) -#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) -#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) -#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) -#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) -#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) -#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) -#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) -#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) -#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) -#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) - -#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) -#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) -#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) -#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) -#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) -#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) -#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) -#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) -#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) - -#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) -#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) -#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) -#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) -/* for mx27*/ -#define OTG_BASE_ADDR USBOTG_BASE_ADDR -#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) -#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) -#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) -#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) -#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) - -#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) -#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) -#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) -#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) -#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) - -#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) -#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) - -/* ROMP and AVIC */ -#define ROMP_BASE_ADDR 0x10041000 - -#define AVIC_BASE_ADDR 0x10040000 - -#define SAHB1_BASE_ADDR 0x80000000 -#define SAHB1_BASE_ADDR_VIRT 0xF4100000 -#define SAHB1_SIZE SZ_1M - -#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) -#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) - -/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ -#define X_MEMC_BASE_ADDR 0xD8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 -#define X_MEMC_SIZE SZ_1M - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) -#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) - -/* Memory regions and CS */ -#define SDRAM_BASE_ADDR 0xA0000000 -#define CSD1_BASE_ADDR 0xB0000000 - -#define CS0_BASE_ADDR 0xC0000000 -#define CS1_BASE_ADDR 0xC8000000 -#define CS2_BASE_ADDR 0xD0000000 -#define CS3_BASE_ADDR 0xD2000000 -#define CS4_BASE_ADDR 0xD4000000 -#define CS5_BASE_ADDR 0xD6000000 -#define PCMCIA_MEM_BASE_ADDR 0xDC000000 - -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ - AIPI_IO_ADDRESS(x) : \ - ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ - SAHB1_IO_ADDRESS(x) : \ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ - X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) - -/* define the address mapping macros: in physical address order */ -#define AIPI_IO_ADDRESS(x) \ - (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) - -#define SAHB1_IO_ADDRESS(x) \ - (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* fixed interrput numbers */ -#define MXC_INT_CCM 63 -#define MXC_INT_IIM 62 -#define MXC_INT_LCDC 61 -#define MXC_INT_SLCDC 60 -#define MXC_INT_SAHARA 59 -#define MXC_INT_SCC_SCM 58 -#define MXC_INT_SCC_SMN 57 -#define MXC_INT_USB3 56 -#define MXC_INT_USB2 55 -#define MXC_INT_USB1 54 -#define MXC_INT_VPU 53 -#define MXC_INT_EMMAPP 52 -#define MXC_INT_EMMAPRP 51 -#define MXC_INT_FEC 50 -#define MXC_INT_UART5 49 -#define MXC_INT_UART6 48 -#define MXC_INT_DMACH15 47 -#define MXC_INT_DMACH14 46 -#define MXC_INT_DMACH13 45 -#define MXC_INT_DMACH12 44 -#define MXC_INT_DMACH11 43 -#define MXC_INT_DMACH10 42 -#define MXC_INT_DMACH9 41 -#define MXC_INT_DMACH8 40 -#define MXC_INT_DMACH7 39 -#define MXC_INT_DMACH6 38 -#define MXC_INT_DMACH5 37 -#define MXC_INT_DMACH4 36 -#define MXC_INT_DMACH3 35 -#define MXC_INT_DMACH2 34 -#define MXC_INT_DMACH1 33 -#define MXC_INT_DMACH0 32 -#define MXC_INT_CSI 31 -#define MXC_INT_ATA 30 -#define MXC_INT_NANDFC 29 -#define MXC_INT_PCMCIA 28 -#define MXC_INT_WDOG 27 -#define MXC_INT_GPT1 26 -#define MXC_INT_GPT2 25 -#define MXC_INT_GPT3 24 -#define MXC_INT_GPT INT_GPT1 -#define MXC_INT_PWM 23 -#define MXC_INT_RTC 22 -#define MXC_INT_KPP 21 -#define MXC_INT_UART1 20 -#define MXC_INT_UART2 19 -#define MXC_INT_UART3 18 -#define MXC_INT_UART4 17 -#define MXC_INT_CSPI1 16 -#define MXC_INT_CSPI2 15 -#define MXC_INT_SSI1 14 -#define MXC_INT_SSI2 13 -#define MXC_INT_I2C 12 -#define MXC_INT_SDHC1 11 -#define MXC_INT_SDHC2 10 -#define MXC_INT_SDHC3 9 -#define MXC_INT_GPIO 8 -#define MXC_INT_SDHC 7 -#define MXC_INT_CSPI3 6 -#define MXC_INT_RTIC 5 -#define MXC_INT_GPT4 4 -#define MXC_INT_GPT5 3 -#define MXC_INT_GPT6 2 -#define MXC_INT_I2C2 1 - -/* fixed DMA request numbers */ -#define DMA_REQ_NFC 37 -#define DMA_REQ_SDHC3 36 -#define DMA_REQ_UART6_RX 35 -#define DMA_REQ_UART6_TX 34 -#define DMA_REQ_UART5_RX 33 -#define DMA_REQ_UART5_TX 32 -#define DMA_REQ_CSI_RX 31 -#define DMA_REQ_CSI_STAT 30 -#define DMA_REQ_ATA_RCV 29 -#define DMA_REQ_ATA_TX 28 -#define DMA_REQ_UART1_TX 27 -#define DMA_REQ_UART1_RX 26 -#define DMA_REQ_UART2_TX 25 -#define DMA_REQ_UART2_RX 24 -#define DMA_REQ_UART3_TX 23 -#define DMA_REQ_UART3_RX 22 -#define DMA_REQ_UART4_TX 21 -#define DMA_REQ_UART4_RX 20 -#define DMA_REQ_CSPI1_TX 19 -#define DMA_REQ_CSPI1_RX 18 -#define DMA_REQ_CSPI2_TX 17 -#define DMA_REQ_CSPI2_RX 16 -#define DMA_REQ_SSI1_TX1 15 -#define DMA_REQ_SSI1_RX1 14 -#define DMA_REQ_SSI1_TX0 13 -#define DMA_REQ_SSI1_RX0 12 -#define DMA_REQ_SSI2_TX1 11 -#define DMA_REQ_SSI2_RX1 10 -#define DMA_REQ_SSI2_TX0 9 -#define DMA_REQ_SSI2_RX0 8 -#define DMA_REQ_SDHC1 7 -#define DMA_REQ_SDHC2 6 -#define DMA_REQ_MSHC 4 -#define DMA_REQ_EXT 3 -#define DMA_REQ_CSPI3_TX 2 -#define DMA_REQ_CSPI3_RX 1 - -/* silicon revisions specific to i.MX27 */ -#define CHIP_REV_1_0 0x00 -#define CHIP_REV_2_0 0x01 - -#ifndef __ASSEMBLY__ -extern int mx27_revision(void); -#endif - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x1C -#define GPIO_GDIR 0x00 -#define GPIO_PSR 0x24 -#define GPIO_ICR1 0x28 -#define GPIO_ICR2 0x2C -#define GPIO_IMR 0x30 -#define GPIO_ISR 0x34 -#define GPIO_INT_LOW_LEV 0x3 -#define GPIO_INT_HIGH_LEV 0x2 -#define GPIO_INT_RISE_EDGE 0x0 -#define GPIO_INT_FALL_EDGE 0x1 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this is an i.MX27 CPU */ -#define cpu_is_mx27() (1) - -/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ -#define ARCH_NR_GPIOS (192 + 16) - -/* OS clock tick rate */ -#define CLOCK_TICK_RATE 13300000 - -/* Start of RAM */ -#define PHYS_OFFSET SDRAM_BASE_ADDR - -/* max interrupt lines count */ -#define NR_IRQS 256 - -/* count of internal interrupt sources */ -#define MXC_MAX_INT_LINES 64 - -#endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h deleted file mode 100644 index a7373e4a56cb..000000000000 --- a/include/asm-arm/arch-mxc/mx31.h +++ /dev/null @@ -1,384 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/*! - * defines the hardware clock tick rate - */ -#define CLOCK_TICK_RATE 16625000 - -/* - * MX31 memory map: - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * F8000000 1FFC0000 16K IRAM - * F9000000 30000000 256M L2CC - * FC000000 43F00000 1M AIPS 1 - * FC100000 50000000 1M SPBA - * FC200000 53F00000 1M AIPS 2 - * FC500000 60000000 128M ROMPATCH - * FC400000 68000000 128M AVIC - * 70000000 256M IPU (MAX M2) - * 80000000 256M CSD0 SDRAM/DDR - * 90000000 256M CSD1 SDRAM/DDR - * A0000000 128M CS0 Flash - * A8000000 128M CS1 Flash - * B0000000 32M CS2 - * B2000000 32M CS3 - * F4000000 B4000000 32M CS4 - * B6000000 32M CS5 - * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers - * C0000000 64M PCMCIA/CF - */ - -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/* - * IRAM - */ -#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ -#define IRAM_BASE_ADDR_VIRT 0xF8000000 -#define IRAM_SIZE SZ_16K - -/* - * L2CC - */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_BASE_ADDR_VIRT 0xF9000000 -#define L2CC_SIZE SZ_1M - -/* - * AIPS 1 - */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M - -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) -#define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) -#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) -#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) -#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) - -/* - * SPBA global module enabled #0 - */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M - -#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) -#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) -#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) -#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) - -/* - * AIPS 2 - */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) -#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) -#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) -#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) -#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) -#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) - -/* - * ROMP and AVIC - */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M - -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR - -/* - * Memory regions and CS - */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ - ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ - ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ - -#define IRAM_IO_ADDRESS(x) \ - (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) - -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */ -#define PHYS_OFFSET CSD0_BASE_ADDR - -/* - * Interrupt numbers - */ -#define MXC_INT_PEN_ADS7843 0 -#define MXC_INT_RESV1 1 -#define MXC_INT_CS8900A 2 -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 -#define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_RTIC 6 -#define MXC_INT_FIRI 7 -#define MXC_INT_MMC_SDHC2 8 -#define MXC_INT_MMC_SDHC1 9 -#define MXC_INT_I2C 10 -#define MXC_INT_SSI2 11 -#define MXC_INT_SSI1 12 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 -#define MXC_INT_MBX 16 -#define MXC_INT_CSPI3 17 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 -#define MXC_INT_SIM2 20 -#define MXC_INT_SIM1 21 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_RESV30 30 -#define MXC_INT_RESV31 31 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 -#define MXC_INT_USB1 35 -#define MXC_INT_USB2 36 -#define MXC_INT_USB3 37 -#define MXC_INT_USB4 38 -#define MXC_INT_MSHC1 39 -#define MXC_INT_MSHC2 40 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_RESV43 43 -#define MXC_INT_RESV44 44 -#define MXC_INT_UART1 45 -#define MXC_INT_UART4 46 -#define MXC_INT_UART5 47 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 -#define MXC_INT_CCM 53 -#define MXC_INT_PCMCIA 54 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_RESV57 57 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 - -#define MXC_MAX_INT_LINES 64 - -#define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES -#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) -#define MXC_MAX_VIRTUAL_INTS 16 - -#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS) - -/*! - * Number of GPIO port as defined in the IC Spec - */ -#define GPIO_PORT_NUM 3 -/*! - * Number of GPIO pins per port - */ -#define GPIO_NUM_PIN 32 - -#define PROD_SIGNATURE 0x1 /* For MX31 */ - -/* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -/* this is a i.MX31 CPU */ -#define cpu_is_mx31() (1) - -extern unsigned int system_rev; - -static inline int mx31_revision(void) -{ - return system_rev; -} -#endif - -#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h deleted file mode 100644 index 332eda4dbd3b..000000000000 --- a/include/asm-arm/arch-mxc/mxc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_MXC_H__ -#define __ASM_ARCH_MXC_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* clean up all things that are not used */ -#ifndef CONFIG_ARCH_MX3 -# define cpu_is_mx31() (0) -#endif - -#ifndef CONFIG_MACH_MX27 -# define cpu_is_mx27() (0) -#endif - -#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h deleted file mode 100644 index 5439fa6cf615..000000000000 --- a/include/asm-arm/arch-mxc/mxc_timer.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * mxc_timer.h - * - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef __PLAT_MXC_TIMER_H -#define __PLAT_MXC_TIMER_H - -#include -#include - -#ifdef CONFIG_ARCH_IMX -#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) -#define TIMER_INTERRUPT TIM1_INT - -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_CLK_TIN (3<<1) -#define TCTL_CLK_32 (4<<1) - -#define MXC_TCTL 0x00 -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(0, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_IMX */ - -#ifdef CONFIG_ARCH_MX2 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT1 - -#define MXC_TCTL 0x00 -#define TCTL_VAL TCTL_CLK_PCLK1 -#define TCTL_CLK_PCLK1 (1<<1) -#define TCTL_CLK_PCLK1_4 (2<<1) -#define TCTL_IRQEN (1<<4) -#define TCTL_FRR (1<<8) -#define MXC_TPRER 0x04 -#define MXC_TCMP 0x08 -#define MXC_TCR 0x0c -#define MXC_TCN 0x10 -#define MXC_TSTAT 0x14 -#define TSTAT_CAPT (1<<1) -#define TSTAT_COMP (1<<0) - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - tmp = __raw_readl(TIMER_BASE + MXC_TCTL); - __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, - TIMER_BASE + MXC_TCTL); -} - -static void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX2 */ - -#ifdef CONFIG_ARCH_MX3 -#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) -#define TIMER_INTERRUPT MXC_INT_GPT - -#define MXC_TCTL 0x00 -#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) -#define TCTL_CLK_IPG (1<<6) -#define TCTL_FRR (1<<9) -#define TCTL_WAITEN (1<<3) - -#define MXC_TPRER 0x04 -#define MXC_TSTAT 0x08 -#define TSTAT_OF1 (1<<0) -#define TSTAT_OF2 (1<<1) -#define TSTAT_OF3 (1<<2) -#define TSTAT_IF1 (1<<3) -#define TSTAT_IF2 (1<<4) -#define TSTAT_ROV (1<<5) -#define MXC_IR 0x0c -#define MXC_TCMP 0x10 -#define MXC_TCMP2 0x14 -#define MXC_TCMP3 0x18 -#define MXC_TCR 0x1c -#define MXC_TCN 0x24 - -static inline void gpt_irq_disable(void) -{ - __raw_writel(0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_enable(void) -{ - __raw_writel(1<<0, TIMER_BASE + MXC_IR); -} - -static inline void gpt_irq_acknowledge(void) -{ - __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); -} -#endif /* CONFIG_ARCH_MX3 */ - -#define TCTL_SWR (1<<15) -#define TCTL_CC (1<<10) -#define TCTL_OM (1<<9) -#define TCTL_CAP_RIS (1<<6) -#define TCTL_CAP_FAL (2<<6) -#define TCTL_CAP_RIS_FAL (3<<6) -#define TCTL_CAP_ENA (1<<5) -#define TCTL_TEN (1<<0) - -#endif diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h deleted file mode 100644 index bbfc37465fc5..000000000000 --- a/include/asm-arm/arch-mxc/system.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_SYSTEM_H__ -#define __ASM_ARCH_MXC_SYSTEM_H__ - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/timex.h b/include/asm-arm/arch-mxc/timex.h deleted file mode 100644 index 432e0c84c509..000000000000 --- a/include/asm-arm/arch-mxc/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_TIMEX_H__ -#define __ASM_ARCH_MXC_TIMEX_H__ - -#include /* for CLOCK_TICK_RATE */ - -#endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/include/asm-arm/arch-mxc/uncompress.h b/include/asm-arm/arch-mxc/uncompress.h deleted file mode 100644 index 18f33b0cdeb2..000000000000 --- a/include/asm-arm/arch-mxc/uncompress.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-mxc/uncompress.h - * - * - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__ -#define __ASM_ARCH_MXC_UNCOMPRESS_H__ - -#define __MXC_BOOT_UNCOMPRESS - -#include - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -#define USR2 0x98 -#define USR2_TXFE (1<<14) -#define TXR 0x40 -#define UCR1 0x80 -#define UCR1_UARTEN 1 - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -static void putc(int ch) -{ - static unsigned long serial_port = 0; - - if (unlikely(serial_port == 0)) { - do { - serial_port = UART1_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - serial_port = UART2_BASE_ADDR; - if (UART(UCR1) & UCR1_UARTEN) - break; - return; - } while (0); - } - - while (!(UART(USR2) & USR2_TXFE)) - barrier(); - - UART(TXR) = ch; -} - -#define flush() do { } while (0) - -/* - * nothing to do - */ -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h deleted file mode 100644 index 62d97623412f..000000000000 --- a/include/asm-arm/arch-mxc/vmalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2000 Russell King. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_VMALLOC_H__ -#define __ASM_ARCH_MXC_VMALLOC_H__ - -/* vmalloc ending address */ -#define VMALLOC_END 0xF4000000 - -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/include/asm-arm/arch-netx/debug-macro.S b/include/asm-arm/arch-netx/debug-macro.S deleted file mode 100644 index a940d0e80cb2..000000000000 --- a/include/asm-arm/arch-netx/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/include/asm-arm/arch-netx/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00100000 @ physical - movne \rx, #io_p2v(0x00100000) @ virtual - orr \rx, \rx, #0x00000a00 - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #0] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) - bne 1002b - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x18] - tst \rd, #(1 << 3) - bne 1001b - .endm diff --git a/include/asm-arm/arch-netx/dma.h b/include/asm-arm/arch-netx/dma.h deleted file mode 100644 index 4eda5feed81c..000000000000 --- a/include/asm-arm/arch-netx/dma.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/dma.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define MAX_DMA_CHANNELS 0 -#define MAX_DMA_ADDRESS ~0 diff --git a/include/asm-arm/arch-netx/entry-macro.S b/include/asm-arm/arch-netx/entry-macro.S deleted file mode 100644 index 4115bbdf97ae..000000000000 --- a/include/asm-arm/arch-netx/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-netx/entry-macro.S - * - * Low-level IRQ helper macros for Hilscher netX based platforms - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov \base, #io_p2v(0x00100000) - add \base, \base, #0x000ff000 - - ldr \irqstat, [\base, #0] - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - cmp \irqstat, #0 - .endm - diff --git a/include/asm-arm/arch-netx/eth.h b/include/asm-arm/arch-netx/eth.h deleted file mode 100644 index 643c90ef8b72..000000000000 --- a/include/asm-arm/arch-netx/eth.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-netx/eth.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef ASMARM_ARCH_ETH_H -#define ASMARM_ARCH_ETH_H - -struct netxeth_platform_data { - unsigned int xcno; /* number of xmac/xpec engine this eth uses */ -}; - -#endif diff --git a/include/asm-arm/arch-netx/hardware.h b/include/asm-arm/arch-netx/hardware.h deleted file mode 100644 index 7786c45455cd..000000000000 --- a/include/asm-arm/arch-netx/hardware.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-arm/arch-netx/hardware.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define NETX_IO_PHYS 0x00100000 -#define NETX_IO_VIRT 0xe0000000 -#define NETX_IO_SIZE 0x00100000 - -#define SRAM_INTERNAL_PHYS_0 0x00000 -#define SRAM_INTERNAL_PHYS_1 0x08000 -#define SRAM_INTERNAL_PHYS_2 0x10000 -#define SRAM_INTERNAL_PHYS_3 0x18000 -#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) - -#define XPEC_MEM_SIZE 0x4000 -#define XMAC_MEM_SIZE 0x1000 -#define SRAM_MEM_SIZE 0x8000 - -#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT) -#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) - -#endif diff --git a/include/asm-arm/arch-netx/io.h b/include/asm-arm/arch-netx/io.h deleted file mode 100644 index a7a53f80165d..000000000000 --- a/include/asm-arm/arch-netx/io.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/io.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-netx/irqs.h b/include/asm-arm/arch-netx/irqs.h deleted file mode 100644 index a487dc6e2661..000000000000 --- a/include/asm-arm/arch-netx/irqs.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-arm/arch-netx/irqs.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define NETX_IRQ_VIC_START 0 -#define NETX_IRQ_SOFTINT 0 -#define NETX_IRQ_TIMER0 1 -#define NETX_IRQ_TIMER1 2 -#define NETX_IRQ_TIMER2 3 -#define NETX_IRQ_SYSTIME_NS 4 -#define NETX_IRQ_SYSTIME_S 5 -#define NETX_IRQ_GPIO_15 6 -#define NETX_IRQ_WATCHDOG 7 -#define NETX_IRQ_UART0 8 -#define NETX_IRQ_UART1 9 -#define NETX_IRQ_UART2 10 -#define NETX_IRQ_USB 11 -#define NETX_IRQ_SPI 12 -#define NETX_IRQ_I2C 13 -#define NETX_IRQ_LCD 14 -#define NETX_IRQ_HIF 15 -#define NETX_IRQ_GPIO_0_14 16 -#define NETX_IRQ_XPEC0 17 -#define NETX_IRQ_XPEC1 18 -#define NETX_IRQ_XPEC2 19 -#define NETX_IRQ_XPEC3 20 -#define NETX_IRQ_XPEC(no) (17 + (no)) -#define NETX_IRQ_MSYNC0 21 -#define NETX_IRQ_MSYNC1 22 -#define NETX_IRQ_MSYNC2 23 -#define NETX_IRQ_MSYNC3 24 -#define NETX_IRQ_IRQ_PHY 25 -#define NETX_IRQ_ISO_AREA 26 -/* int 27 is reserved */ -/* int 28 is reserved */ -#define NETX_IRQ_TIMER3 29 -#define NETX_IRQ_TIMER4 30 -/* int 31 is reserved */ - -#define NETX_IRQS 32 - -/* for multiplexed irqs on gpio 0..14 */ -#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) -#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) - -/* Host interface interrupts */ -#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) -#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) -#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) -#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) -#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) -#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) -#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) - -#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/include/asm-arm/arch-netx/memory.h b/include/asm-arm/arch-netx/memory.h deleted file mode 100644 index 6d8d2df3e99d..000000000000 --- a/include/asm-arm/arch-netx/memory.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/memory.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x80000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif - diff --git a/include/asm-arm/arch-netx/netx-regs.h b/include/asm-arm/arch-netx/netx-regs.h deleted file mode 100644 index fc9aa21f360c..000000000000 --- a/include/asm-arm/arch-netx/netx-regs.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * include/asm-arm/arch-netx/netx-regs.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_NETX_REGS_H -#define __ASM_ARCH_NETX_REGS_H - -/* offsets relative to the beginning of the io space */ -#define NETX_OFS_SYSTEM 0x00000 -#define NETX_OFS_MEMCR 0x00100 -#define NETX_OFS_DPMAS 0x03000 -#define NETX_OFS_GPIO 0x00800 -#define NETX_OFS_PIO 0x00900 -#define NETX_OFS_UART0 0x00a00 -#define NETX_OFS_UART1 0x00a40 -#define NETX_OFS_UART2 0x00a80 -#define NETX_OF_MIIMU 0x00b00 -#define NETX_OFS_SPI 0x00c00 -#define NETX_OFS_I2C 0x00d00 -#define NETX_OFS_SYSTIME 0x01100 -#define NETX_OFS_RTC 0x01200 -#define NETX_OFS_EXTBUS 0x03600 -#define NETX_OFS_LCD 0x04000 -#define NETX_OFS_USB 0x20000 -#define NETX_OFS_XMAC0 0x60000 -#define NETX_OFS_XMAC1 0x61000 -#define NETX_OFS_XMAC2 0x62000 -#define NETX_OFS_XMAC3 0x63000 -#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000) -#define NETX_OFS_PFIFO 0x64000 -#define NETX_OFS_XPEC0 0x70000 -#define NETX_OFS_XPEC1 0x74000 -#define NETX_OFS_XPEC2 0x78000 -#define NETX_OFS_XPEC3 0x7c000 -#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000) -#define NETX_OFS_VIC 0xff000 - -/* physical addresses */ -#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM) -#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR) -#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS) -#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO) -#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO) -#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0) -#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1) -#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2) -#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU) -#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI) -#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C) -#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME) -#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC) -#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS) -#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD) -#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB) -#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0) -#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1) -#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2) -#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3) -#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no)) -#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO) -#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0) -#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1) -#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2) -#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3) -#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no)) -#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC) - -/* virual addresses */ -#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM) -#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR) -#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS) -#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO) -#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO) -#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0) -#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1) -#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2) -#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU) -#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI) -#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C) -#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME) -#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC) -#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS) -#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD) -#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB) -#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0) -#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1) -#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2) -#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3) -#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no)) -#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO) -#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0) -#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1) -#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2) -#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3) -#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no)) -#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC) - -/********************************* - * System functions * - *********************************/ - -/* Registers */ -#define NETX_SYSTEM_REG(ofs) __io(NETX_VA_SYSTEM + (ofs)) -#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) -#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) -#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) - -/* FIXME: Docs are not consistent */ -/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */ -#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) - -#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) -#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) -#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70) -#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200) -#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204) -#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208) -#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c) - -/* Bits */ -#define NETX_SYSTEM_RES_CR_RSTIN (1<<0) -#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1) -#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2) -#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3) -#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4) -#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5) -#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6) -#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7) -#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16) -#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17) -#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18) -#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23) -#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24) -#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25) -#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26) - -#define PHY_CONTROL_RESET (1<<31) -#define PHY_CONTROL_SIM_BYP (1<<30) -#define PHY_CONTROL_CLK_XLATIN (1<<29) -#define PHY_CONTROL_PHY1_EN (1<<21) -#define PHY_CONTROL_PHY1_NP_MSG_CODE -#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17) -#define PHY_CONTROL_PHY1_FIXMODE (1<<16) -#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13) -#define PHY_CONTROL_PHY0_EN (1<<12) -#define PHY_CONTROL_PHY0_NP_MSG_CODE -#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8) -#define PHY_CONTROL_PHY0_FIXMODE (1<<7) -#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4) -#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf) - -#define PHY_MODE_10BASE_T_HALF 0 -#define PHY_MODE_10BASE_T_FULL 1 -#define PHY_MODE_100BASE_TX_FX_FULL 2 -#define PHY_MODE_100BASE_TX_FX_HALF 3 -#define PHY_MODE_100BASE_TX_HALF 4 -#define PHY_MODE_REPEATER 5 -#define PHY_MODE_POWER_DOWN 6 -#define PHY_MODE_ALL 7 - -/* Bits */ -#define VECT_CNTL_ENABLE (1 << 5) - -/******************************* - * GPIO and timer module * - *******************************/ - -/* Registers */ -#define NETX_GPIO_REG(ofs) __io(NETX_VA_GPIO + (ofs)) -#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) -#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) -#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2)) -#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc) -#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0) -#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4) -#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8) -#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0) - -/* Bits */ -#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0) -#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1) -#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2) -#define NETX_GPIO_CFG_INV (1<<2) -#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5) -#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5) - -#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0) -#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1) -#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2) -#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3) -#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4) -#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5) -#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6) -#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */ - -#define GPIO_BIT(gpio) (1<<(gpio)) -#define COUNTER_BIT(counter) ((1<<16)<<(counter)) - -/******************************* - * PIO * - *******************************/ - -/* Registers */ -#define NETX_PIO_REG(ofs) __io(NETX_VA_PIO + (ofs)) -#define NETX_PIO_INPIO NETX_PIO_REG(0x0) -#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) -#define NETX_PIO_OEPIO NETX_PIO_REG(0x8) - -/******************************* - * MII Unit * - *******************************/ - -/* Registers */ -#define NETX_MIIMU __io(NETX_VA_MIIMU) - -/* Bits */ -#define MIIMU_SNRDY (1<<0) -#define MIIMU_PREAMBLE (1<<1) -#define MIIMU_OPMODE_WRITE (1<<2) -#define MIIMU_MDC_PERIOD (1<<3) -#define MIIMU_PHY_NRES (1<<4) -#define MIIMU_RTA (1<<5) -#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6) -#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11) -#define MIIMU_DATA(data) (((data) & 0xffff) << 16) - -/******************************* - * xmac / xpec * - *******************************/ - -/* XPEC register offsets relative to NETX_VA_XPEC(no) */ -#define NETX_XPEC_R0_OFS 0x00 -#define NETX_XPEC_R1_OFS 0x04 -#define NETX_XPEC_R2_OFS 0x08 -#define NETX_XPEC_R3_OFS 0x0c -#define NETX_XPEC_R4_OFS 0x10 -#define NETX_XPEC_R5_OFS 0x14 -#define NETX_XPEC_R6_OFS 0x18 -#define NETX_XPEC_R7_OFS 0x1c -#define NETX_XPEC_RANGE01_OFS 0x20 -#define NETX_XPEC_RANGE23_OFS 0x24 -#define NETX_XPEC_RANGE45_OFS 0x28 -#define NETX_XPEC_RANGE67_OFS 0x2c -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2)) -#define NETX_XPEC_IRQ_OFS 0x8c -#define NETX_XPEC_SYSTIME_NS_OFS 0x90 -#define NETX_XPEC_FIFO_DATA_OFS 0x94 -#define NETX_XPEC_SYSTIME_S_OFS 0x98 -#define NETX_XPEC_ADC_OFS 0x9c -#define NETX_XPEC_URX_COUNT_OFS 0x40 -#define NETX_XPEC_UTX_COUNT_OFS 0x44 -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_ZERO_OFS 0x4c -#define NETX_XPEC_STATCFG_OFS 0x50 -#define NETX_XPEC_EC_MASKA_OFS 0x54 -#define NETX_XPEC_EC_MASKB_OFS 0x58 -#define NETX_XPEC_EC_MASK0_OFS 0x5c -#define NETX_XPEC_EC_MASK8_OFS 0x7c -#define NETX_XPEC_EC_MASK9_OFS 0x80 -#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100 -#define NETX_XPEC_RAM_START_OFS 0x2000 - -/* Bits */ -#define XPU_HOLD_PC (1<<0) - -/* XMAC register offsets relative to NETX_VA_XMAC(no) */ -#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000 -#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff -#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400 -#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff -#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00 -#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04 -#define NETX_XMAC_STATUS_SHARED0_OFS 0x840 -#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844 -#define NETX_XMAC_STATUS_SHARED1_OFS 0x848 -#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c -#define NETX_XMAC_STATUS_SHARED2_OFS 0x850 -#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854 -#define NETX_XMAC_STATUS_SHARED3_OFS 0x858 -#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c - -#define RPU_HOLD_PC (1<<15) -#define TPU_HOLD_PC (1<<15) - -/******************************* - * Pointer FIFO * - *******************************/ - -/* Registers */ -#define NETX_PFIFO_REG(ofs) __io(NETX_VA_PFIFO + (ofs)) -#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) -#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) -#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) -#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104) -#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108) -#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c) -#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110) -#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2)) -#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2)) - -/******************************* - * Dual Port Memory * - *******************************/ - -/* Registers */ -#define NETX_DPMAS_REG(ofs) __io(NETX_VA_DPMAS + (ofs)) -#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) -#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) -#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) -#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608) -#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c) -#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs)) -#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */ -#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624) -#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628) -#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */ -#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634) -#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638) - -/* Bits */ -#define NETX_DPMAS_INT_EN_GLB_EN (1<<31) -#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30) -#define NETX_DPMAS_INT_EN_WDG (1<<29) -#define NETX_DPMAS_INT_EN_PIO72 (1<<28) -#define NETX_DPMAS_INT_EN_PIO47 (1<<27) -#define NETX_DPMAS_INT_EN_PIO40 (1<<26) -#define NETX_DPMAS_INT_EN_PIO36 (1<<25) -#define NETX_DPMAS_INT_EN_PIO35 (1<<24) - -#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28) -#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28) -#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14) - -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30) - -#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29) -#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26) -#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23) -#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20) -#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17) -#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12) -#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7) -#define NETX_EXT_CONFIG_WAIT_POL (1<<6) -#define NETX_EXT_CONFIG_WAIT_EN (1<<5) -#define NETX_EXT_CONFIG_NRD_MODE (1<<4) -#define NETX_EXT_CONFIG_DS_MODE (1<<3) -#define NETX_EXT_CONFIG_NWR_MODE (1<<2) -#define NETX_EXT_CONFIG_16BIT (1<<1) -#define NETX_EXT_CONFIG_CS_ENABLE (1<<0) - -#define NETX_DPMAS_IO_MODE0_WRL (1<<13) -#define NETX_DPMAS_IO_MODE0_WAIT (1<<14) -#define NETX_DPMAS_IO_MODE0_READY (1<<15) -#define NETX_DPMAS_IO_MODE0_CS0 (1<<19) -#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20) - -#define NETX_DPMAS_IO_MODE1_CS2 (1<<15) -#define NETX_DPMAS_IO_MODE1_CS1 (1<<16) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30) - -/******************************* - * I2C * - *******************************/ -#define NETX_I2C_REG(ofs) __io(NETX_VA_I2C, (ofs)) -#define NETX_I2C_CTRL NETX_I2C_REG(0x0) -#define NETX_I2C_DATA NETX_I2C_REG(0x4) - -#endif /* __ASM_ARCH_NETX_REGS_H */ diff --git a/include/asm-arm/arch-netx/param.h b/include/asm-arm/arch-netx/param.h deleted file mode 100644 index 7a80c26178a8..000000000000 --- a/include/asm-arm/arch-netx/param.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/param.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-netx/pfifo.h b/include/asm-arm/arch-netx/pfifo.h deleted file mode 100644 index 4af2ee4a32c1..000000000000 --- a/include/asm-arm/arch-netx/pfifo.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * include/asm-arm/arch-netx/pfifo.h - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#ifndef ASM_ARCH_PFIFO_H -#define ASM_ARCH_PFIFO_H - -static inline int pfifo_push(int no, unsigned int pointer) -{ - writel(pointer, NETX_PFIFO_BASE(no)); - return 0; -} - -static inline unsigned int pfifo_pop(int no) -{ - return readl(NETX_PFIFO_BASE(no)); -} - -static inline int pfifo_fill_level(int no) -{ - - return readl(NETX_PFIFO_FILL_LEVEL(no)); -} - -static inline int pfifo_full(int no) -{ - return readl(NETX_PFIFO_FULL) & (1<, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include "netx-regs.h" - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, - NETX_SYSTEM_RES_CR); -} - -#endif - diff --git a/include/asm-arm/arch-netx/timex.h b/include/asm-arm/arch-netx/timex.h deleted file mode 100644 index 7fdb42da0b40..000000000000 --- a/include/asm-arm/arch-netx/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-netx/timex.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE 100000000 diff --git a/include/asm-arm/arch-netx/uncompress.h b/include/asm-arm/arch-netx/uncompress.h deleted file mode 100644 index f89434547102..000000000000 --- a/include/asm-arm/arch-netx/uncompress.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-arm/arch-netx/uncompress.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -#define REG(x) (*(volatile unsigned long *)(x)) - -#define UART1_BASE 0x100a00 -#define UART2_BASE 0x100a80 - -#define UART_DR 0x0 - -#define UART_CR 0x14 -#define CR_UART_EN (1<<0) - -#define UART_FR 0x18 -#define FR_BUSY (1<<3) -#define FR_TXFF (1<<5) - -static void putc(char c) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_TXFF); - REG(base + UART_DR) = c; -} - -static inline void flush(void) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_BUSY); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-netx/vmalloc.h b/include/asm-arm/arch-netx/vmalloc.h deleted file mode 100644 index da2da5a595da..000000000000 --- a/include/asm-arm/arch-netx/vmalloc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/vmalloc.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-netx/xc.h b/include/asm-arm/arch-netx/xc.h deleted file mode 100644 index 659af19512a9..000000000000 --- a/include/asm-arm/arch-netx/xc.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/include/asm-arm/arch-netx/xc.h - * - * Copyright (C) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_XC_H -#define __ASM_ARCH_XC_H - -struct xc { - int no; - unsigned int type; - unsigned int version; - void __iomem *xpec_base; - void __iomem *xmac_base; - void __iomem *sram_base; - int irq; - struct device *dev; -}; - -int xc_reset(struct xc *x); -int xc_stop(struct xc* x); -int xc_start(struct xc *x); -int xc_running(struct xc *x); -int xc_request_firmware(struct xc* x); -struct xc* request_xc(int xcno, struct device *dev); -void free_xc(struct xc *x); - -#endif /* __ASM_ARCH_XC_H */ diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h deleted file mode 100644 index e57443bdbbd9..000000000000 --- a/include/asm-arm/arch-ns9xxx/board.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/board.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_BOARD_H -#define __ASM_ARCH_BOARD_H - -#include - -#define board_is_a9m9750dev() (0 \ - || machine_is_cc9p9360dev() \ - || machine_is_cc9p9750dev() \ - ) - -#define board_is_a9mvali() (0 \ - || machine_is_cc9p9360val() \ - || machine_is_cc9p9750val() \ - ) - -#define board_is_jscc9p9210() (0 \ - || machine_is_cc9p9210js() \ - ) - -#define board_is_jscc9p9215() (0 \ - || machine_is_cc9p9215js() \ - ) - -#define board_is_jscc9p9360() (0 \ - || machine_is_cc9p9360js() \ - ) - -#define board_is_uncbas() (0 \ - || machine_is_cc7ucamry() \ - ) - -#endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S deleted file mode 100644 index c78908d7203d..000000000000 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/debug-macro.S - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) - ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h deleted file mode 100644 index a67cbbe009c4..000000000000 --- a/include/asm-arm/arch-ns9xxx/dma.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/dma.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#endif /* ifndef __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S deleted file mode 100644 index e9d9449d300a..000000000000 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/entry-macro.S - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#include -#include - - .macro get_irqnr_preamble, base, tmp - ldr \base, =SYS_ISRADDR - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] - cmp \irqstat, #0 - ldrne \irqnr, [\base] - .endm - - .macro disable_fiq - .endm diff --git a/include/asm-arm/arch-ns9xxx/gpio.h b/include/asm-arm/arch-ns9xxx/gpio.h deleted file mode 100644 index adbca08583c0..000000000000 --- a/include/asm-arm/arch-ns9xxx/gpio.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/gpio.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H - -#include - -int gpio_request(unsigned gpio, const char *label); - -void gpio_free(unsigned gpio); - -int ns9xxx_gpio_configure(unsigned gpio, int inv, int func); - -int gpio_direction_input(unsigned gpio); - -int gpio_direction_output(unsigned gpio, int value); - -int gpio_get_value(unsigned gpio); - -void gpio_set_value(unsigned gpio, int value); - -/* - * ns9xxx can use gpio pins to trigger an irq, but it's not generic - * enough to be supported by the gpio_to_irq/irq_to_gpio interface - */ -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -/* get the cansleep() stubs */ -#include - -#endif /* ifndef __ASM_ARCH_GPIO_H */ diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h deleted file mode 100644 index 0dca11ce21fc..000000000000 --- a/include/asm-arm/arch-ns9xxx/hardware.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/hardware.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* - * NetSilicon NS9xxx internal mapping: - * - * physical <--> virtual - * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff - * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff - */ -#define io_p2v(x) (0xf0000000 \ - + (((x) & 0xf0000000) >> 4) \ - + ((x) & 0x00ffffff)) - -#define io_v2p(x) ((((x) & 0x0f000000) << 4) \ - + ((x) & 0x00ffffff)) - -#define __REGSHIFT(mask) ((mask) & (-(mask))) - -#define __REGBIT(bit) ((u32)1 << (bit)) -#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit)) -#define __REGVAL(mask, value) (((value) * __REGSHIFT(mask)) & (mask)) - -#ifndef __ASSEMBLY__ - -# define __REG(x) ((void __iomem __force *)io_p2v((x))) -# define __REG2(x, y) ((void __iomem __force *)(io_p2v((x)) + 4 * (y))) - -# define __REGSET(var, field, value) \ - ((var) = (((var) & ~((field) & ~(value))) | (value))) - -# define REGSET(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value) - -# define REGSET_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx))) - -# define REGSETIM(var, reg, field, value) \ - __REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value))) - -# define REGSETIM_IDX(var, reg, field, idx, value) \ - __REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value))) - -# define __REGGET(var, field) \ - (((var) & (field))) - -# define REGGET(var, reg, field) \ - __REGGET(var, reg ## _ ## field) - -# define REGGET_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) - -# define REGGETIM(var, reg, field) \ - __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field) - -# define REGGETIM_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) / \ - __REGSHIFT(reg ## _ ## field((idx))) - -#else - -# define __REG(x) io_p2v(x) -# define __REG2(x, y) io_p2v((x) + 4 * (y)) - -#endif - -#endif /* ifndef __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h deleted file mode 100644 index 6f82d28af120..000000000000 --- a/include/asm-arm/arch-ns9xxx/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/io.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff /* XXX */ - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) -#define __mem_isa(a) (IO_BASE + (a)) - -#endif /* ifndef __ASM_ARCH_IO_H */ diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h deleted file mode 100644 index e83d48ec42c9..000000000000 --- a/include/asm-arm/arch-ns9xxx/irqs.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/irqs.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -/* NetSilicon 9360 */ -#define IRQ_NS9XXX_WATCHDOG 0 -#define IRQ_NS9XXX_AHBBUSERR 1 -#define IRQ_NS9360_BBUSAGG 2 -/* irq 3 is reserved for NS9360 */ -#define IRQ_NS9XXX_ETHRX 4 -#define IRQ_NS9XXX_ETHTX 5 -#define IRQ_NS9XXX_ETHPHY 6 -#define IRQ_NS9360_LCD 7 -#define IRQ_NS9360_SERBRX 8 -#define IRQ_NS9360_SERBTX 9 -#define IRQ_NS9360_SERARX 10 -#define IRQ_NS9360_SERATX 11 -#define IRQ_NS9360_SERCRX 12 -#define IRQ_NS9360_SERCTX 13 -#define IRQ_NS9360_I2C 14 -#define IRQ_NS9360_BBUSDMA 15 -#define IRQ_NS9360_TIMER0 16 -#define IRQ_NS9360_TIMER1 17 -#define IRQ_NS9360_TIMER2 18 -#define IRQ_NS9360_TIMER3 19 -#define IRQ_NS9360_TIMER4 20 -#define IRQ_NS9360_TIMER5 21 -#define IRQ_NS9360_TIMER6 22 -#define IRQ_NS9360_TIMER7 23 -#define IRQ_NS9360_RTC 24 -#define IRQ_NS9360_USBHOST 25 -#define IRQ_NS9360_USBDEVICE 26 -#define IRQ_NS9360_IEEE1284 27 -#define IRQ_NS9XXX_EXT0 28 -#define IRQ_NS9XXX_EXT1 29 -#define IRQ_NS9XXX_EXT2 30 -#define IRQ_NS9XXX_EXT3 31 - -#define BBUS_IRQ(irq) (32 + irq) - -#define IRQ_BBUS_DMA BBUS_IRQ(0) -#define IRQ_BBUS_SERBRX BBUS_IRQ(2) -#define IRQ_BBUS_SERBTX BBUS_IRQ(3) -#define IRQ_BBUS_SERARX BBUS_IRQ(4) -#define IRQ_BBUS_SERATX BBUS_IRQ(5) -#define IRQ_BBUS_SERCRX BBUS_IRQ(6) -#define IRQ_BBUS_SERCTX BBUS_IRQ(7) -#define IRQ_BBUS_SERDRX BBUS_IRQ(8) -#define IRQ_BBUS_SERDTX BBUS_IRQ(9) -#define IRQ_BBUS_I2C BBUS_IRQ(10) -#define IRQ_BBUS_1284 BBUS_IRQ(11) -#define IRQ_BBUS_UTIL BBUS_IRQ(12) -#define IRQ_BBUS_RTC BBUS_IRQ(13) -#define IRQ_BBUS_USBHST BBUS_IRQ(14) -#define IRQ_BBUS_USBDEV BBUS_IRQ(15) -#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24) -#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25) - -/* - * these Interrupts are specific for the a9m9750dev board. - * They are generated by an FPGA that interrupts the CPU on - * IRQ_NS9360_EXT2 - */ -#define FPGA_IRQ(irq) (64 + irq) - -#define IRQ_FPGA_UARTA FPGA_IRQ(0) -#define IRQ_FPGA_UARTB FPGA_IRQ(1) -#define IRQ_FPGA_UARTC FPGA_IRQ(2) -#define IRQ_FPGA_UARTD FPGA_IRQ(3) -#define IRQ_FPGA_TOUCH FPGA_IRQ(4) -#define IRQ_FPGA_CF FPGA_IRQ(5) -#define IRQ_FPGA_CAN0 FPGA_IRQ(6) -#define IRQ_FPGA_CAN1 FPGA_IRQ(7) - -#define NR_IRQS 72 - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h deleted file mode 100644 index ce1343e593e1..000000000000 --- a/include/asm-arm/arch-ns9xxx/memory.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/memory.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. -*/ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* x in [0..3] */ -#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28) - -#define NS9XXX_CS0STAT_LENGTH UL(0x1000) -#define NS9XXX_CS1STAT_LENGTH UL(0x1000) -#define NS9XXX_CS2STAT_LENGTH UL(0x1000) -#define NS9XXX_CS3STAT_LENGTH UL(0x1000) - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h deleted file mode 100644 index ac08a31111e4..000000000000 --- a/include/asm-arm/arch-ns9xxx/module.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/module.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_MODULE_H -#define __ASM_ARCH_MODULE_H - -#include - -#define module_is_cc7ucamry() (0 \ - || machine_is_cc7ucamry() \ - ) - -#define module_is_cc9c() (0 \ - || machine_is_cc9c() \ - ) - -#define module_is_cc9p9210() (0 \ - || machine_is_cc9p9210() \ - || machine_is_cc9p9210js() \ - ) - -#define module_is_cc9p9215() (0 \ - || machine_is_cc9p9215() \ - || machine_is_cc9p9215js() \ - ) - -#define module_is_cc9p9360() (0 \ - || machine_is_a9m9360() \ - || machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js() \ - || machine_is_cc9p9360val() \ - ) - -#define module_is_cc9p9750() (0 \ - || machine_is_a9m9750() \ - || machine_is_cc9p9750dev() \ - || machine_is_cc9p9750js() \ - || machine_is_cc9p9750val() \ - ) - -#define module_is_ccw9c() (0 \ - || machine_is_ccw9c() \ - ) - -#define module_is_inc20otter() (0 \ - || machine_is_inc20otter() \ - ) - -#define module_is_otter() (0 \ - || machine_is_otter() \ - ) - -#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h deleted file mode 100644 index f3aa6c50dbe5..000000000000 --- a/include/asm-arm/arch-ns9xxx/processor-ns9360.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/processor-ns9360.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSORNS9360_H -#define __ASM_ARCH_PROCESSORNS9360_H - -#include - -void ns9360_reset(char mode); - -unsigned long ns9360_systemclock(void) __attribute__((const)); - -static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); -static inline unsigned long ns9360_cpuclock(void) -{ - return ns9360_systemclock() / 2; -} - -void __init ns9360_map_io(void); - -extern struct sys_timer ns9360_timer; - -int ns9360_gpio_configure(unsigned gpio, int inv, int func); - -#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h deleted file mode 100644 index 3137e5ba01a9..000000000000 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/processor.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_PROCESSOR_H -#define __ASM_ARCH_PROCESSOR_H - -#include - -#define processor_is_ns9210() (0 \ - || module_is_cc7ucamry() \ - || module_is_cc9p9210() \ - || module_is_inc20otter() \ - || module_is_otter() \ - ) - -#define processor_is_ns9215() (0 \ - || module_is_cc9p9215() \ - ) - -#define processor_is_ns9360() (0 \ - || module_is_cc9p9360() \ - || module_is_cc9c() \ - || module_is_ccw9c() \ - ) - -#define processor_is_ns9750() (0 \ - || module_is_cc9p9750() \ - ) - -#define processor_is_ns921x() (0 \ - || processor_is_ns9210() \ - || processor_is_ns9215() \ - ) - -#endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h deleted file mode 100644 index b41b31d04f03..000000000000 --- a/include/asm-arm/arch-ns9xxx/regs-bbu.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-bbu.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBBU_H -#define __ASM_ARCH_REGSBBU_H - -#include - -/* BBus Utility */ - -/* GPIO Configuration Registers block 1 */ -/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is - * at 0 for each block. That is, BBU_GCONFb1(0) is GPIO Configuration Register - * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */ -#define BBU_GCONFb1(x) __REG2(0x90600010, (x)) -#define BBU_GCONFb2(x) __REG2(0x90600100, (x)) - -#define BBU_GCONFx_DIR(m) __REGBIT(3 + (((m) & 7) << 2)) -#define BBU_GCONFx_DIR_INPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 0) -#define BBU_GCONFx_DIR_OUTPUT(m) __REGVAL(BBU_GCONFx_DIR(m), 1) -#define BBU_GCONFx_INV(m) __REGBIT(2 + (((m) & 7) << 2)) -#define BBU_GCONFx_INV_NO(m) __REGVAL(BBU_GCONFx_INV(m), 0) -#define BBU_GCONFx_INV_YES(m) __REGVAL(BBU_GCONFx_INV(m), 1) -#define BBU_GCONFx_FUNC(m) __REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2) -#define BBU_GCONFx_FUNC_0(m) __REGVAL(BBU_GCONFx_FUNC(m), 0) -#define BBU_GCONFx_FUNC_1(m) __REGVAL(BBU_GCONFx_FUNC(m), 1) -#define BBU_GCONFx_FUNC_2(m) __REGVAL(BBU_GCONFx_FUNC(m), 2) -#define BBU_GCONFx_FUNC_3(m) __REGVAL(BBU_GCONFx_FUNC(m), 3) - -#define BBU_GCTRL1 __REG(0x90600030) -#define BBU_GCTRL2 __REG(0x90600034) -#define BBU_GCTRL3 __REG(0x90600120) - -#define BBU_GSTAT1 __REG(0x90600040) -#define BBU_GSTAT2 __REG(0x90600044) -#define BBU_GSTAT3 __REG(0x90600130) - -#endif /* ifndef __ASM_ARCH_REGSBBU_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h deleted file mode 100644 index 6bf1ed2ac3d2..000000000000 --- a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSBOARDA9M9750_H -#define __ASM_ARCH_REGSBOARDA9M9750_H - -#include - -#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0)) -#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08) -#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10) -#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18) - -#define FPGA_IER __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50) -#define FPGA_ISR __REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60) - -#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h deleted file mode 100644 index 023f7be6f4c6..000000000000 --- a/include/asm-arm/arch-ns9xxx/regs-mem.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-mem.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSMEM_H -#define __ASM_ARCH_REGSMEM_H - -#include - -/* Memory Module */ - -/* Control register */ -#define MEM_CTRL __REG(0xa0700000) - -/* Status register */ -#define MEM_STAT __REG(0xa0700004) - -/* Configuration register */ -#define MEM_CONF __REG(0xa0700008) - -/* Dynamic Memory Control register */ -#define MEM_DMCTRL __REG(0xa0700020) - -/* Dynamic Memory Refresh Timer */ -#define MEM_DMRT __REG(0xa0700024) - -/* Dynamic Memory Read Configuration register */ -#define MEM_DMRC __REG(0xa0700028) - -/* Dynamic Memory Precharge Command Period (tRP) */ -#define MEM_DMPCP __REG(0xa0700030) - -/* Dynamic Memory Active to Precharge Command Period (tRAS) */ -#define MEM_DMAPCP __REG(0xa0700034) - -/* Dynamic Memory Self-Refresh Exit Time (tSREX) */ -#define MEM_DMSRET __REG(0xa0700038) - -/* Dynamic Memory Last Data Out to Active Time (tAPR) */ -#define MEM_DMLDOAT __REG(0xa070003c) - -/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */ -#define MEM_DMDIACT __REG(0xa0700040) - -/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */ -#define MEM_DMWRT __REG(0xa0700044) - -/* Dynamic Memory Active to Active Command Period (tRC) */ -#define MEM_DMAACP __REG(0xa0700048) - -/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */ -#define MEM_DMARP __REG(0xa070004c) - -/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */ -#define MEM_DMESRAC __REG(0xa0700050) - -/* Dynamic Memory Active Bank A to Active B Time (tRRD) */ -#define MEM_DMABAABT __REG(0xa0700054) - -/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */ -#define MEM_DMLMACT __REG(0xa0700058) - -/* Static Memory Extended Wait */ -#define MEM_SMEW __REG(0xa0700080) - -/* Dynamic Memory Configuration Register x */ -#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3) - -/* Dynamic Memory RAS and CAS Delay x */ -#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3) - -/* Static Memory Configuration Register x */ -#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3) - -/* Static Memory Configuration Register x: Write protect */ -#define MEM_SMC_PSMC __REGBIT(20) -#define MEM_SMC_PSMC_OFF __REGVAL(MEM_SMC_PSMC, 0) -#define MEM_SMC_PSMC_ON __REGVAL(MEM_SMC_PSMC, 1) - -/* Static Memory Configuration Register x: Buffer enable */ -#define MEM_SMC_BSMC __REGBIT(19) -#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0) -#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1) - -/* Static Memory Configuration Register x: Extended Wait */ -#define MEM_SMC_EW __REGBIT(8) -#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0) -#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1) - -/* Static Memory Configuration Register x: Byte lane state */ -#define MEM_SMC_PB __REGBIT(7) -#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0) -#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1) - -/* Static Memory Configuration Register x: Chip select polarity */ -#define MEM_SMC_PC __REGBIT(6) -#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0) -#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1) - -/* static memory configuration register x: page mode*/ -#define MEM_SMC_PM __REGBIT(3) -#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0) -#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1) - -/* static memory configuration register x: Memory width */ -#define MEM_SMC_MW __REGBITS(1, 0) -#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0) -#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1) -#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2) - -/* Static Memory Write Enable Delay x */ -#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3) - -/* Static Memory Output Enable Delay x */ -#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3) - -/* Static Memory Read Delay x */ -#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3) - -/* Static Memory Page Mode Read Delay 0 */ -#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3) - -/* Static Memory Write Delay */ -#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3) - -/* Static Memory Turn Round Delay x */ -#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3) - -#endif /* ifndef __ASM_ARCH_REGSMEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h deleted file mode 100644 index bc82d5ec2a88..000000000000 --- a/include/asm-arm/arch-ns9xxx/regs-sys-common.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-sys-common.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_REGSSYSCOMMON_H -#define __ASM_ARCH_REGSSYSCOMMON_H -#include - -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - -#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h deleted file mode 100644 index 821275a88cb1..000000000000 --- a/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_REGSSYSNS9360_H -#define __ASM_ARCH_REGSSYSNS9360_H - -#include - -/* System Control Module */ - -/* AHB Arbiter Gen Configuration */ -#define SYS_AHBAGENCONF __REG(0xa0900000) - -/* BRC */ -#define SYS_BRC(x) __REG2(0xa0900004, (x)) - -/* Timer x Reload Count register */ -#define SYS_TRC(x) __REG2(0xa0900044, (x)) - -/* Timer x Read register */ -#define SYS_TR(x) __REG2(0xa0900084, (x)) - -/* Timer Interrupt Status register */ -#define SYS_TIS __REG(0xa0900170) - -/* PLL Configuration register */ -#define SYS_PLL __REG(0xa0900188) - -/* PLL FS status */ -#define SYS_PLL_FS __REGBITS(24, 23) - -/* PLL ND status */ -#define SYS_PLL_ND __REGBITS(20, 16) - -/* PLL Configuration register: PLL SW change */ -#define SYS_PLL_SWC __REGBIT(15) -#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0) -#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1) - -/* Timer x Control register */ -#define SYS_TC(x) __REG2(0xa0900190, (x)) - -/* Timer x Control register: Timer enable */ -#define SYS_TCx_TEN __REGBIT(15) -#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 0) -#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1) - -/* Timer x Control register: CPU debug mode */ -#define SYS_TCx_TDBG __REGBIT(10) -#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0) -#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1) - -/* Timer x Control register: Interrupt clear */ -#define SYS_TCx_INTC __REGBIT(9) -#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0) -#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1) - -/* Timer x Control register: Timer clock select */ -#define SYS_TCx_TLCS __REGBITS(8, 6) -#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */ -#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */ -#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */ -#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */ -#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */ -#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */ -#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */ -#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7) - -/* Timer x Control register: Timer mode */ -#define SYS_TCx_TM __REGBITS(5, 4) -#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */ -#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */ -#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */ -#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */ - -/* Timer x Control register: Interrupt select */ -#define SYS_TCx_INTS __REGBIT(3) -#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0) -#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1) - -/* Timer x Control register: Up/down select */ -#define SYS_TCx_UDS __REGBIT(2) -#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0) -#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1) - -/* Timer x Control register: 32- or 16-bit timer */ -#define SYS_TCx_TSZ __REGBIT(1) -#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0) -#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1) - -/* Timer x Control register: Reload enable */ -#define SYS_TCx_REN __REGBIT(0) -#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0) -#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1) - -/* System Memory Chip Select x Dynamic Memory Base */ -#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1) - -/* System Memory Chip Select x Dynamic Memory Mask */ -#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1) - -/* System Memory Chip Select x Static Memory Base */ -#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1) - -/* System Memory Chip Select x Static Memory Base: Chip select x base */ -#define SYS_SMCSSMB_CSxB __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask */ -#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1) - -/* System Memory Chip Select x Static Memory Mask: Chip select x mask */ -#define SYS_SMCSSMM_CSxM __REGBITS(31, 12) - -/* System Memory Chip Select x Static Memory Mask: Chip select x enable */ -#define SYS_SMCSSMM_CSEx __REGBIT(0) -#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0) -#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1) - -/* General purpose, user-defined ID register */ -#define SYS_GENID __REG(0xa0900210) - -/* External Interrupt x Control register */ -#define SYS_EIC(x) __REG2(0xa0900214, (x)) - -/* External Interrupt x Control register: Status */ -#define SYS_EIC_STS __REGBIT(3) - -/* External Interrupt x Control register: Clear */ -#define SYS_EIC_CLR __REGBIT(2) - -/* External Interrupt x Control register: Polarity */ -#define SYS_EIC_PLTY __REGBIT(1) -#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0) -#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1) - -/* External Interrupt x Control register: Level edge */ -#define SYS_EIC_LVEDG __REGBIT(0) -#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) -#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) - -#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h deleted file mode 100644 index c2941684d667..000000000000 --- a/include/asm-arm/arch-ns9xxx/system.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/system.h - * - * Copyright (C) 2006,2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ -#ifdef CONFIG_PROCESSOR_NS9360 - if (processor_is_ns9360()) - ns9360_reset(mode); - else -#endif - BUG(); - - BUG(); -} - -#endif /* ifndef __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h deleted file mode 100644 index f776cbd2622d..000000000000 --- a/include/asm-arm/arch-ns9xxx/timex.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/timex.h - * - * Copyright (C) 2005-2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* - * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h. - * See there for an explanation. - */ -#define CLOCK_TICK_RATE 12000000 - -#endif /* ifndef __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h deleted file mode 100644 index 71066baceab7..000000000000 --- a/include/asm-arm/arch-ns9xxx/uncompress.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/uncompress.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include - -#define __REG(x) ((void __iomem __force *)(x)) - -static void putc_dummy(char c, void __iomem *base) -{ - /* nothing */ -} - -static void putc_ns9360(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (__raw_readl(base + 8) & (1 << 3)) { - __raw_writeb(c, base + 16); - t = 0x10000; - break; - } - } while (t); -} - -static void putc_a9m9750dev(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (__raw_readb(base + 5) & (1 << 5)) { - __raw_writeb(c, base); - t = 0x10000; - break; - } - } while (t); - -} - -static void putc_ns921x(char c, void __iomem *base) -{ - static int t = 0x10000; - do { - if (t) - --t; - - if (!(__raw_readl(base) & (1 << 11))) { - __raw_writeb(c, base + 0x0028); - t = 0x10000; - break; - } - } while (t); -} - -#define MSCS __REG(0xA0900184) - -#define NS9360_UARTA __REG(0x90200040) -#define NS9360_UARTB __REG(0x90200000) -#define NS9360_UARTC __REG(0x90300000) -#define NS9360_UARTD __REG(0x90300040) - -#define NS9360_UART_ENABLED(base) \ - (__raw_readl(NS9360_UARTA) & (1 << 31)) - -#define A9M9750DEV_UARTA __REG(0x40000000) - -#define NS921XSYS_CLOCK __REG(0xa090017c) -#define NS921X_UARTA __REG(0x90010000) -#define NS921X_UARTB __REG(0x90018000) -#define NS921X_UARTC __REG(0x90020000) -#define NS921X_UARTD __REG(0x90028000) - -#define NS921X_UART_ENABLED(base) \ - (__raw_readl((base) + 0x1000) & (1 << 29)) - -static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) -{ - if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { - /* ns9360 or ns9750 */ - if (NS9360_UART_ENABLED(NS9360_UARTA)) { - *putc = putc_ns9360; - *base = NS9360_UARTA; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { - *putc = putc_ns9360; - *base = NS9360_UARTB; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { - *putc = putc_ns9360; - *base = NS9360_UARTC; - return; - } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { - *putc = putc_ns9360; - *base = NS9360_UARTD; - return; - } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { - *putc = putc_a9m9750dev; - *base = A9M9750DEV_UARTA; - return; - } - } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { - /* ns921x */ - u32 clock = __raw_readl(NS921XSYS_CLOCK); - - if ((clock & (1 << 1)) && - NS921X_UART_ENABLED(NS921X_UARTA)) { - *putc = putc_ns921x; - *base = NS921X_UARTA; - return; - } else if ((clock & (1 << 2)) && - NS921X_UART_ENABLED(NS921X_UARTB)) { - *putc = putc_ns921x; - *base = NS921X_UARTB; - return; - } else if ((clock & (1 << 3)) && - NS921X_UART_ENABLED(NS921X_UARTC)) { - *putc = putc_ns921x; - *base = NS921X_UARTC; - return; - } else if ((clock & (1 << 4)) && - NS921X_UART_ENABLED(NS921X_UARTD)) { - *putc = putc_ns921x; - *base = NS921X_UARTD; - return; - } - } - - *putc = putc_dummy; -} - -void (*myputc)(char, void __iomem *); -void __iomem *base; - -static void putc(char c) -{ - myputc(c, base); -} - -static void arch_decomp_setup(void) -{ - autodetect(&myputc, &base); -} -#define arch_decomp_wdog() - -static void flush(void) -{ - /* nothing */ -} - -#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h deleted file mode 100644 index 2f3cb6f6be24..000000000000 --- a/include/asm-arm/arch-ns9xxx/vmalloc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/vmalloc.h - * - * Copyright (C) 2006 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xf0000000) - -#endif /* ifndef __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-omap/aic23.h b/include/asm-arm/arch-omap/aic23.h deleted file mode 100644 index aec2d6563622..000000000000 --- a/include/asm-arm/arch-omap/aic23.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/aic23.h - * - * Hardware definitions for TI TLV320AIC23 audio codec - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_AIC23_H -#define __ASM_ARCH_AIC23_H - -// Codec TLV320AIC23 -#define LEFT_LINE_VOLUME_ADDR 0x00 -#define RIGHT_LINE_VOLUME_ADDR 0x01 -#define LEFT_CHANNEL_VOLUME_ADDR 0x02 -#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 -#define ANALOG_AUDIO_CONTROL_ADDR 0x04 -#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 -#define POWER_DOWN_CONTROL_ADDR 0x06 -#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 -#define SAMPLE_RATE_CONTROL_ADDR 0x08 -#define DIGITAL_INTERFACE_ACT_ADDR 0x09 -#define RESET_CONTROL_ADDR 0x0F - -// Left (right) line input volume control register -#define LRS_ENABLED 0x0100 -#define LIM_MUTED 0x0080 -#define LIV_DEFAULT 0x0017 -#define LIV_MAX 0x001f -#define LIV_MIN 0x0000 - -// Left (right) channel headphone volume control register -#define LZC_ON 0x0080 -#define LHV_DEFAULT 0x0079 -#define LHV_MAX 0x007f -#define LHV_MIN 0x0000 - -// Analog audio path control register -#define STA_REG(x) ((x)<<6) -#define STE_ENABLED 0x0020 -#define DAC_SELECTED 0x0010 -#define BYPASS_ON 0x0008 -#define INSEL_MIC 0x0004 -#define MICM_MUTED 0x0002 -#define MICB_20DB 0x0001 - -// Digital audio path control register -#define DACM_MUTE 0x0008 -#define DEEMP_32K 0x0002 -#define DEEMP_44K 0x0004 -#define DEEMP_48K 0x0006 -#define ADCHP_ON 0x0001 - -// Power control down register -#define DEVICE_POWER_OFF 0x0080 -#define CLK_OFF 0x0040 -#define OSC_OFF 0x0020 -#define OUT_OFF 0x0010 -#define DAC_OFF 0x0008 -#define ADC_OFF 0x0004 -#define MIC_OFF 0x0002 -#define LINE_OFF 0x0001 - -// Digital audio interface register -#define MS_MASTER 0x0040 -#define LRSWAP_ON 0x0020 -#define LRP_ON 0x0010 -#define IWL_16 0x0000 -#define IWL_20 0x0004 -#define IWL_24 0x0008 -#define IWL_32 0x000C -#define FOR_I2S 0x0002 -#define FOR_DSP 0x0003 - -// Sample rate control register -#define CLKOUT_HALF 0x0080 -#define CLKIN_HALF 0x0040 -#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode -#define USB_CLK_ON 0x0001 -#define SR_MASK 0xf -#define CLKOUT_SHIFT 7 -#define CLKIN_SHIFT 6 -#define SR_SHIFT 2 -#define BOSR_SHIFT 1 - -// Digital interface register -#define ACT_ON 0x0001 - -#define TLV320AIC23ID1 (0x1a) // cs low -#define TLV320AIC23ID2 (0x1b) // cs high - -void aic23_power_up(void); -void aic23_power_down(void); - -#endif /* __ASM_ARCH_AIC23_H */ diff --git a/include/asm-arm/arch-omap/blizzard.h b/include/asm-arm/arch-omap/blizzard.h deleted file mode 100644 index 8d160f171372..000000000000 --- a/include/asm-arm/arch-omap/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected : 1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h deleted file mode 100644 index c7db9004ec31..000000000000 --- a/include/asm-arm/arch-omap/board-2430sdp.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-2430sdp.h - * - * Hardware definitions for TI OMAP2430 SDP board. - * - * Based on board-h4.h by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_2430SDP_H -#define __ASM_ARCH_OMAP_2430SDP_H - -/* Placeholder for 2430SDP specific defines */ -#define OMAP24XX_ETHR_START 0x08000300 -#define OMAP24XX_ETHR_GPIO_IRQ 149 -#define SDP2430_CS0_BASE 0x04000000 - -#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ - -#endif /* __ASM_ARCH_OMAP_2430SDP_H */ diff --git a/include/asm-arm/arch-omap/board-ams-delta.h b/include/asm-arm/arch-omap/board-ams-delta.h deleted file mode 100644 index 9aee15d97145..000000000000 --- a/include/asm-arm/arch-omap/board-ams-delta.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-ams-delta.h - * - * Copyright (C) 2006 Jonathan McDowell - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H -#define __ASM_ARCH_OMAP_AMS_DELTA_H - -#if defined (CONFIG_MACH_AMS_DELTA) - -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 -#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 -#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 -#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 - -#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 -#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK 1 -#define AMS_DELTA_GPIO_PIN_MODEM_IRQ 2 -#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH 4 -#define AMS_DELTA_GPIO_PIN_SCARD_NOFF 6 -#define AMS_DELTA_GPIO_PIN_SCARD_IO 7 -#define AMS_DELTA_GPIO_PIN_CONFIG 11 -#define AMS_DELTA_GPIO_PIN_NAND_RB 12 - -#ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); -#endif - -#endif /* CONFIG_MACH_AMS_DELTA */ - -#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */ diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h deleted file mode 100644 index 547125a4695e..000000000000 --- a/include/asm-arm/arch-omap/board-apollon.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-apollon.h - * - * Hardware definitions for Samsung OMAP24XX Apollon board. - * - * Initial creation by Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_APOLLON_H -#define __ASM_ARCH_OMAP_APOLLON_H - -extern void apollon_mmc_init(void); - -/* Placeholder for APOLLON specific defines */ -#define APOLLON_ETHR_GPIO_IRQ 74 - -#endif /* __ASM_ARCH_OMAP_APOLLON_H */ - diff --git a/include/asm-arm/arch-omap/board-fsample.h b/include/asm-arm/arch-omap/board-fsample.h deleted file mode 100644 index 89a1e529fb6f..000000000000 --- a/include/asm-arm/arch-omap/board-fsample.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-fsample.h - * - * Board-specific goodies for TI F-Sample. - * - * Copyright (C) 2006 Google, Inc. - * Author: Brian Swetland - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FSAMPLE_H -#define __ASM_ARCH_OMAP_FSAMPLE_H - -/* fsample is pretty close to p2-sample */ -#include - -#define fsample_cpld_read(reg) __raw_readb(reg) -#define fsample_cpld_write(val, reg) __raw_writeb(val, reg) - -#define FSAMPLE_CPLD_BASE 0xE8100000 -#define FSAMPLE_CPLD_SIZE SZ_4K -#define FSAMPLE_CPLD_START 0x05080000 - -#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00) -#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02) -#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04) -#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06) -#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06) - -#define FSAMPLE_CPLD_BIT_BT_RESET 0 -#define FSAMPLE_CPLD_BIT_LCD_RESET 1 -#define FSAMPLE_CPLD_BIT_CAM_PWDN 2 -#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3 -#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4 -#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5 -#define FSAMPLE_CPLD_BIT_BACKLIGHT 6 -#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7 -#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8 -#define FSAMPLE_CPLD_BIT_OTG_RESET 9 - -#define fsample_cpld_set(bit) \ - fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR) - -#define fsample_cpld_clear(bit) \ - fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) - -#endif diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h deleted file mode 100644 index c322796d0d26..000000000000 --- a/include/asm-arm/arch-omap/board-h2.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h2.h - * - * Hardware definitions for TI OMAP1610 H2 board. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H2_H -#define __ASM_ARCH_OMAP_H2_H - -/* Placeholder for H2 specific defines */ - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define OMAP1610_ETHR_START 0x04000300 - -extern void h2_mmc_init(void); -extern void h2_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_OMAP_H2_H */ - diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h deleted file mode 100644 index c5d0f32a40ac..000000000000 --- a/include/asm-arm/arch-omap/board-h3.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h3.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_H3_H -#define __ASM_ARCH_OMAP_H3_H - -/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ -#define OMAP1710_ETHR_START 0x04000300 - -extern void h3_mmc_init(void); -extern void h3_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h deleted file mode 100644 index 7e0efef4bb65..000000000000 --- a/include/asm-arm/arch-omap/board-h4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-h4.h - * - * Hardware definitions for TI OMAP1610 H4 board. - * - * Initial creation by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_H4_H -#define __ASM_ARCH_OMAP_H4_H - -/* Placeholder for H4 specific defines */ -#define OMAP24XX_ETHR_GPIO_IRQ 92 -#endif /* __ASM_ARCH_OMAP_H4_H */ - diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h deleted file mode 100644 index 9ca03dec9d36..000000000000 --- a/include/asm-arm/arch-omap/board-innovator.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-innovator.h - * - * Copyright (C) 2001 RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_INNOVATOR_H -#define __ASM_ARCH_OMAP_INNOVATOR_H - -#if defined (CONFIG_ARCH_OMAP15XX) - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#define OMAP1510P1_IMIF_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFS_PRI_VALUE 0x00 -#define OMAP1510P1_EMIFF_PRI_VALUE 0x00 - -#ifndef __ASSEMBLY__ -void fpga_write(unsigned char val, int reg); -unsigned char fpga_read(int reg); -#endif - -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined (CONFIG_ARCH_OMAP16XX) - -/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ -#define INNOVATOR1610_ETHR_START 0x04000300 - -#endif /* CONFIG_ARCH_OMAP1610 */ -#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */ diff --git a/include/asm-arm/arch-omap/board-nokia.h b/include/asm-arm/arch-omap/board-nokia.h deleted file mode 100644 index 72deea203493..000000000000 --- a/include/asm-arm/arch-omap/board-nokia.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-nokia.h - * - * Information structures for Nokia-specific board config data - * - * Copyright (C) 2005 Nokia Corporation - */ - -#ifndef _OMAP_BOARD_NOKIA_H -#define _OMAP_BOARD_NOKIA_H - -#include - -#define OMAP_TAG_NOKIA_BT 0x4e01 -#define OMAP_TAG_WLAN_CX3110X 0x4e02 -#define OMAP_TAG_CBUS 0x4e03 -#define OMAP_TAG_EM_ASIC_BB5 0x4e04 - - -#define BT_CHIP_CSR 1 -#define BT_CHIP_TI 2 - -#define BT_SYSCLK_12 1 -#define BT_SYSCLK_38_4 2 - -struct omap_bluetooth_config { - u8 chip_type; - u8 bt_wakeup_gpio; - u8 host_wakeup_gpio; - u8 reset_gpio; - u8 bt_uart; - u8 bd_addr[6]; - u8 bt_sysclk; -}; - -struct omap_wlan_cx3110x_config { - u8 chip_type; - s16 power_gpio; - s16 irq_gpio; - s16 spi_cs_gpio; -}; - -struct omap_cbus_config { - s16 clk_gpio; - s16 dat_gpio; - s16 sel_gpio; -}; - -struct omap_em_asic_bb5_config { - s16 retu_irq_gpio; - s16 tahvo_irq_gpio; -}; - -#endif diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h deleted file mode 100644 index 94926090e475..000000000000 --- a/include/asm-arm/arch-omap/board-osk.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-osk.h - * - * Hardware definitions for TI OMAP5912 OSK board. - * - * Written by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_OSK_H -#define __ASM_ARCH_OMAP_OSK_H - -/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ -#define OMAP_OSK_ETHR_START 0x04800300 - -/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with - * alternate pin configurations for hardware-controlled blinking. - */ -#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) -# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) -# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) -# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) -# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) -# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) - -#endif /* __ASM_ARCH_OMAP_OSK_H */ - diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h deleted file mode 100644 index 6fac2c8935be..000000000000 --- a/include/asm-arm/arch-omap/board-palmte.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmte.h - * - * Hardware definitions for the Palm Tungsten E device. - * - * Maintainters : http://palmtelinux.sf.net - * palmtelinux-developpers@lists.sf.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTE_H -#define __OMAP_BOARD_PALMTE_H - -#define PALMTE_USBDETECT_GPIO 0 -#define PALMTE_USB_OR_DC_GPIO 1 -#define PALMTE_TSC_GPIO 4 -#define PALMTE_PINTDAV_GPIO 6 -#define PALMTE_MMC_WP_GPIO 8 -#define PALMTE_MMC_POWER_GPIO 9 -#define PALMTE_HDQ_GPIO 11 -#define PALMTE_HEADPHONES_GPIO 14 -#define PALMTE_SPEAKER_GPIO 15 -#define PALMTE_DC_GPIO OMAP_MPUIO(2) -#define PALMTE_MMC_SWITCH_GPIO OMAP_MPUIO(4) -#define PALMTE_MMC1_GPIO OMAP_MPUIO(6) -#define PALMTE_MMC2_GPIO OMAP_MPUIO(7) -#define PALMTE_MMC3_GPIO OMAP_MPUIO(11) - -#endif /* __OMAP_BOARD_PALMTE_H */ diff --git a/include/asm-arm/arch-omap/board-palmtt.h b/include/asm-arm/arch-omap/board-palmtt.h deleted file mode 100644 index d9590b0ec90e..000000000000 --- a/include/asm-arm/arch-omap/board-palmtt.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmte.h - * - * Hardware definitions for the Palm Tungsten|T device. - * - * Maintainters : Marek Vasut - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMTT_H -#define __OMAP_BOARD_PALMTT_H - -#define PALMTT_USBDETECT_GPIO 0 -#define PALMTT_CABLE_GPIO 1 -#define PALMTT_LED_GPIO 3 -#define PALMTT_PENIRQ_GPIO 6 -#define PALMTT_MMC_WP_GPIO 8 -#define PALMTT_HDQ_GPIO 11 - -#endif /* __OMAP_BOARD_PALMTT_H */ diff --git a/include/asm-arm/arch-omap/board-palmz71.h b/include/asm-arm/arch-omap/board-palmz71.h deleted file mode 100644 index 1252a859787d..000000000000 --- a/include/asm-arm/arch-omap/board-palmz71.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-palmz71.h - * - * Hardware definitions for the Palm Zire71 device. - * - * Maintainters : Marek Vasut - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP_BOARD_PALMZ71_H -#define __OMAP_BOARD_PALMZ71_H - -#define PALMZ71_USBDETECT_GPIO 0 -#define PALMZ71_PENIRQ_GPIO 6 -#define PALMZ71_MMC_WP_GPIO 8 -#define PALMZ71_HDQ_GPIO 11 - -#define PALMZ71_HOTSYNC_GPIO OMAP_MPUIO(1) -#define PALMZ71_CABLE_GPIO OMAP_MPUIO(2) -#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3) -#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4) - -#endif /* __OMAP_BOARD_PALMZ71_H */ diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h deleted file mode 100644 index d7429cb0f726..000000000000 --- a/include/asm-arm/arch-omap/board-perseus2.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board-perseus2.h - * - * Copyright 2003 by Texas Instruments Incorporated - * OMAP730 / Perseus2 support by Jean Pihet - * - * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) - * Author: RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_ARCH_OMAP_PERSEUS2_H -#define __ASM_ARCH_OMAP_PERSEUS2_H - -#include - -#ifndef OMAP_SDRAM_DEVICE -#define OMAP_SDRAM_DEVICE D256M_1X16_4B -#endif - -#endif diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h deleted file mode 100644 index 355adbdaae33..000000000000 --- a/include/asm-arm/arch-omap/board-sx1.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Siemens SX1 board definitions - * - * Copyright: Vovan888 at gmail com - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H -#define __ASM_ARCH_SX1_I2C_CHIPS_H - -#define SOFIA_MAX_LIGHT_VAL 0x2B - -#define SOFIA_I2C_ADDR 0x32 -/* Sofia reg 3 bits masks */ -#define SOFIA_POWER1_REG 0x03 - -#define SOFIA_USB_POWER 0x01 -#define SOFIA_MMC_POWER 0x04 -#define SOFIA_BLUETOOTH_POWER 0x08 -#define SOFIA_MMILIGHT_POWER 0x20 - -#define SOFIA_POWER2_REG 0x04 -#define SOFIA_BACKLIGHT_REG 0x06 -#define SOFIA_KEYLIGHT_REG 0x07 -#define SOFIA_DIMMING_REG 0x09 - - -/* Function Prototypes for SX1 devices control on I2C bus */ - -int sx1_setbacklight(u8 backlight); -int sx1_getbacklight(u8 *backlight); -int sx1_setkeylight(u8 keylight); -int sx1_getkeylight(u8 *keylight); - -int sx1_setmmipower(u8 onoff); -int sx1_setusbpower(u8 onoff); -int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); -int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); - -/* MMC prototypes */ - -extern void sx1_mmc_init(void); -extern void sx1_mmc_slot_cover_handler(void *arg, int state); - -#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h deleted file mode 100644 index ed6d346ee123..000000000000 --- a/include/asm-arm/arch-omap/board-voiceblue.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl - * - * Hardware definitions for OMAP5910 based VoiceBlue board. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_VOICEBLUE_H -#define __ASM_ARCH_VOICEBLUE_H - -extern void voiceblue_wdt_enable(void); -extern void voiceblue_wdt_disable(void); -extern void voiceblue_wdt_ping(void); -extern void voiceblue_reset(void); - -#endif /* __ASM_ARCH_VOICEBLUE_H */ - diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h deleted file mode 100644 index 99564c70f128..000000000000 --- a/include/asm-arm/arch-omap/board.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include - -#include - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_MMC 0x4f02 -#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 -#define OMAP_TAG_USB 0x4f04 -#define OMAP_TAG_LCD 0x4f05 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_UART 0x4f07 -#define OMAP_TAG_FBMEM 0x4f08 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_mmc_conf { - unsigned enabled:1; - /* nomux means "standard" muxing is wrong on this board, and that - * board-specific code handled it before common init logic. - */ - unsigned nomux:1; - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - /* 4 wire signaling is optional, and is only used for SD/SDIO */ - unsigned wire4:1; - s16 power_pin; - s16 switch_pin; - s16 wp_pin; -}; - -struct omap_mmc_config { - struct omap_mmc_conf mmc[2]; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - - -#include - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h deleted file mode 100644 index 4c7b3514f71a..000000000000 --- a/include/asm-arm/arch-omap/clock.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/clock.h - * - * Copyright (C) 2004 - 2005 Nokia corporation - * Written by Tuukka Tikkanen - * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_CLOCK_H -#define __ARCH_ARM_OMAP_CLOCK_H - -struct module; -struct clk; - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - -struct clksel_rate { - u8 div; - u32 val; - u8 flags; -}; - -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - -struct dpll_data { - void __iomem *mult_div1_reg; - u32 mult_mask; - u32 div1_mask; - u16 last_rounded_m; - u8 last_rounded_n; - unsigned long last_rounded_rate; - unsigned int rate_tolerance; - u16 max_multiplier; - u8 max_divider; - u32 max_tolerance; -# if defined(CONFIG_ARCH_OMAP3) - u8 modes; - void __iomem *control_reg; - u32 enable_mask; - u8 auto_recal_bit; - u8 recal_en_bit; - u8 recal_st_bit; - void __iomem *autoidle_reg; - u32 autoidle_mask; - void __iomem *idlest_reg; - u8 idlest_bit; -# endif -}; - -#endif - -struct clk { - struct list_head node; - struct module *owner; - const char *name; - int id; - struct clk *parent; - unsigned long rate; - __u32 flags; - void __iomem *enable_reg; - __u8 enable_bit; - __s8 usecount; - void (*recalc)(struct clk *); - int (*set_rate)(struct clk *, unsigned long); - long (*round_rate)(struct clk *, unsigned long); - void (*init)(struct clk *); - int (*enable)(struct clk *); - void (*disable)(struct clk *); -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - u8 fixed_div; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; - struct dpll_data *dpll_data; -#else - __u8 rate_offset; - __u8 src_offset; -#endif -#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) - struct dentry *dent; /* For visible tree hierarchy */ -#endif -}; - -struct cpufreq_frequency_table; - -struct clk_functions { - int (*clk_enable)(struct clk *clk); - void (*clk_disable)(struct clk *clk); - long (*clk_round_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_rate)(struct clk *clk, unsigned long rate); - int (*clk_set_parent)(struct clk *clk, struct clk *parent); - struct clk * (*clk_get_parent)(struct clk *clk); - void (*clk_allow_idle)(struct clk *clk); - void (*clk_deny_idle)(struct clk *clk); - void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); -#endif -}; - -extern unsigned int mpurate; - -extern int clk_init(struct clk_functions * custom_clocks); -extern int clk_register(struct clk *clk); -extern void clk_unregister(struct clk *clk); -extern void propagate_rate(struct clk *clk); -extern void recalculate_root_clocks(void); -extern void followparent_recalc(struct clk * clk); -extern void clk_allow_idle(struct clk *clk); -extern void clk_deny_idle(struct clk *clk); -extern int clk_get_usecount(struct clk *clk); -extern void clk_enable_init_clocks(void); - -/* Clock flags */ -#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ -#define RATE_FIXED (1 << 1) /* Fixed clock rate */ -#define RATE_PROPAGATES (1 << 2) /* Program children too */ -#define VIRTUAL_CLOCK (1 << 3) /* Composite clock from table */ -#define ALWAYS_ENABLED (1 << 4) /* Clock cannot be disabled */ -#define ENABLE_REG_32BIT (1 << 5) /* Use 32-bit access */ -#define VIRTUAL_IO_ADDRESS (1 << 6) /* Clock in virtual address */ -#define CLOCK_IDLE_CONTROL (1 << 7) -#define CLOCK_NO_IDLE_PARENT (1 << 8) -#define DELAYED_APP (1 << 9) /* Delay application of clock */ -#define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ -#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ -/* bits 13-20 are currently free */ -#define CLOCK_IN_OMAP310 (1 << 21) -#define CLOCK_IN_OMAP730 (1 << 22) -#define CLOCK_IN_OMAP1510 (1 << 23) -#define CLOCK_IN_OMAP16XX (1 << 24) -#define CLOCK_IN_OMAP242X (1 << 25) -#define CLOCK_IN_OMAP243X (1 << 26) -#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ -#define PARENT_CONTROLS_CLOCK (1 << 28) -#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ -#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ - -/* Clksel_rate flags */ -#define DEFAULT_RATE (1 << 0) -#define RATE_IN_242X (1 << 1) -#define RATE_IN_243X (1 << 2) -#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ -#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - - -/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ -#define CORE_CLK_SRC_32K 0 -#define CORE_CLK_SRC_DPLL 1 -#define CORE_CLK_SRC_DPLL_X2 2 - -#endif diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h deleted file mode 100644 index 8ac03071f60c..000000000000 --- a/include/asm-arm/arch-omap/common.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/common.h - * - * Header for code common to all OMAP machines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H -#define __ARCH_ARM_MACH_OMAP_COMMON_H - -#include - -struct sys_timer; - -extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; -extern void omap_serial_init(void); -#ifdef CONFIG_I2C_OMAP -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif - -/* IO bases for various OMAP processors */ -struct omap_globals { - void __iomem *tap; /* Control module ID code */ - void __iomem *sdrc; /* SDRAM Controller */ - void __iomem *sms; /* SDRAM Memory Scheduler */ - void __iomem *ctrl; /* System Control Module */ - void __iomem *prm; /* Power and Reset Management */ - void __iomem *cm; /* Clock Management */ -}; - -void omap2_set_globals_242x(void); -void omap2_set_globals_243x(void); -void omap2_set_globals_343x(void); - -/* These get called from omap2_set_globals_xxxx(), do not call these */ -void omap2_set_globals_memory(struct omap_globals *); -void omap2_set_globals_control(struct omap_globals *); -void omap2_set_globals_prcm(struct omap_globals *); - -#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h deleted file mode 100644 index 987553e3eeb9..000000000000 --- a/include/asm-arm/arch-omap/control.h +++ /dev/null @@ -1,189 +0,0 @@ -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - -/* - * include/asm-arm/arch-omap/control.h - * - * OMAP2/3 System Control Module definitions - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - */ - -#include - -#define OMAP242X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) - -/* - * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for - * OMAP24XX and OMAP34XX. - */ - -/* Control submodule offsets */ - -#define OMAP2_CONTROL_INTERFACE 0x000 -#define OMAP2_CONTROL_PADCONFS 0x030 -#define OMAP2_CONTROL_GENERAL 0x270 -#define OMAP343X_CONTROL_MEM_WKUP 0x600 -#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 -#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 - -/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ - -#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) - -/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ -#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) -#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) -#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) -#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) -#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) -#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) -#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) -#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) -#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) -#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) -#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) -#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) - -/* 242x-only CONTROL_GENERAL register offsets */ -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) - -/* 243x-only CONTROL_GENERAL register offsets */ -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) - -/* 24xx-only CONTROL_GENERAL register offsets */ -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) - -/* 34xx-only CONTROL_GENERAL register offsets */ -#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) -#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) -#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) -#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) -#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) -#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) -#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) -#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) -#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) -#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) - -/* - * REVISIT: This list of registers is not comprehensive - there are more - * that should be added. - */ - -/* - * Control module register bit defines - these should eventually go into - * their own regbits file. Some of these will be complicated, depending - * on the device type (general-purpose, emulator, test, secure, bad, other) - * and the security mode (secure, non-secure, don't care) - */ -/* CONTROL_DEVCONF0 bits */ -#define OMAP24XX_USBSTANDBYCTRL (1 << 15) -#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) -#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) - -/* CONTROL_DEVCONF1 bits */ -#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ -#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ -#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ - -/* CONTROL_STATUS bits */ -#define OMAP2_DEVICETYPE_MASK (0x7 << 8) -#define OMAP2_SYSBOOT_5_MASK (1 << 5) -#define OMAP2_SYSBOOT_4_MASK (1 << 4) -#define OMAP2_SYSBOOT_3_MASK (1 << 3) -#define OMAP2_SYSBOOT_2_MASK (1 << 2) -#define OMAP2_SYSBOOT_1_MASK (1 << 1) -#define OMAP2_SYSBOOT_0_MASK (1 << 0) - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -extern void __iomem *omap_ctrl_base_get(void); -extern u8 omap_ctrl_readb(u16 offset); -extern u16 omap_ctrl_readw(u16 offset); -extern u32 omap_ctrl_readl(u16 offset); -extern void omap_ctrl_writeb(u8 val, u16 offset); -extern void omap_ctrl_writew(u16 val, u16 offset); -extern void omap_ctrl_writel(u32 val, u16 offset); -#else -#define omap_ctrl_base_get() 0 -#define omap_ctrl_readb(x) 0 -#define omap_ctrl_readw(x) 0 -#define omap_ctrl_readl(x) 0 -#define omap_ctrl_writeb(x, y) WARN_ON(1) -#define omap_ctrl_writew(x, y) WARN_ON(1) -#define omap_ctrl_writel(x, y) WARN_ON(1) -#endif -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_CONTROL_H */ - diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h deleted file mode 100644 index 52db09f83281..000000000000 --- a/include/asm-arm/arch-omap/cpu.h +++ /dev/null @@ -1,402 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/cpu.h - * - * OMAP cpu type detection - * - * Copyright (C) 2004, 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_CPU_H -#define __ASM_ARCH_OMAP_CPU_H - -struct omap_chip_id { - u8 oc; -}; - -#define OMAP_CHIP_INIT(x) { .oc = x } - -extern unsigned int system_rev; - -#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f) - -/* - * Test if multicore OMAP support is needed - */ -#undef MULTI_OMAP1 -#undef MULTI_OMAP2 -#undef OMAP_NAME - -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP15XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap1510 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP16XX -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap16xx -# endif -#endif -#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) -# if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) -# error "OMAP1 and OMAP2 can't be selected at the same time" -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2420 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2420 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP2430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap2430 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP3430 -# ifdef OMAP_NAME -# undef MULTI_OMAP2 -# define MULTI_OMAP2 -# else -# define OMAP_NAME omap3430 -# endif -#endif - -/* - * Macros to group OMAP into cpu classes. - * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730 - * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 - * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 - * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 - * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 - * cpu_is_omap243x(): True for OMAP2430 - * cpu_is_omap343x(): True for OMAP3430 - */ -#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff) - -#define IS_OMAP_CLASS(class, id) \ -static inline int is_omap ##class (void) \ -{ \ - return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ -} - -#define GET_OMAP_SUBCLASS ((system_rev >> 20) & 0x0fff) - -#define IS_OMAP_SUBCLASS(subclass, id) \ -static inline int is_omap ##subclass (void) \ -{ \ - return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ -} - -IS_OMAP_CLASS(7xx, 0x07) -IS_OMAP_CLASS(15xx, 0x15) -IS_OMAP_CLASS(16xx, 0x16) -IS_OMAP_CLASS(24xx, 0x24) -IS_OMAP_CLASS(34xx, 0x34) - -IS_OMAP_SUBCLASS(242x, 0x242) -IS_OMAP_SUBCLASS(243x, 0x243) -IS_OMAP_SUBCLASS(343x, 0x343) - -#define cpu_is_omap7xx() 0 -#define cpu_is_omap15xx() 0 -#define cpu_is_omap16xx() 0 -#define cpu_is_omap24xx() 0 -#define cpu_is_omap242x() 0 -#define cpu_is_omap243x() 0 -#define cpu_is_omap34xx() 0 -#define cpu_is_omap343x() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() is_omap15xx() -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() is_omap16xx() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap15xx -# define cpu_is_omap15xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap16xx -# define cpu_is_omap16xx() 1 -# endif -#endif - -#if defined(MULTI_OMAP2) -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# undef cpu_is_omap242x -# undef cpu_is_omap243x -# define cpu_is_omap24xx() is_omap24xx() -# define cpu_is_omap242x() is_omap242x() -# define cpu_is_omap243x() is_omap243x() -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# undef cpu_is_omap343x -# define cpu_is_omap34xx() is_omap34xx() -# define cpu_is_omap343x() is_omap343x() -# endif -#else -# if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap24xx -# define cpu_is_omap24xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2420) -# undef cpu_is_omap242x -# define cpu_is_omap242x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP2430) -# undef cpu_is_omap243x -# define cpu_is_omap243x() 1 -# endif -# if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap34xx -# define cpu_is_omap34xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP3430) -# undef cpu_is_omap343x -# define cpu_is_omap343x() 1 -# endif -#endif - -/* - * Macros to detect individual cpu types. - * These are only rarely needed. - * cpu_is_omap330(): True for OMAP330 - * cpu_is_omap730(): True for OMAP730 - * cpu_is_omap1510(): True for OMAP1510 - * cpu_is_omap1610(): True for OMAP1610 - * cpu_is_omap1611(): True for OMAP1611 - * cpu_is_omap5912(): True for OMAP5912 - * cpu_is_omap1621(): True for OMAP1621 - * cpu_is_omap1710(): True for OMAP1710 - * cpu_is_omap2420(): True for OMAP2420 - * cpu_is_omap2422(): True for OMAP2422 - * cpu_is_omap2423(): True for OMAP2423 - * cpu_is_omap2430(): True for OMAP2430 - * cpu_is_omap3430(): True for OMAP3430 - */ -#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) - -#define IS_OMAP_TYPE(type, id) \ -static inline int is_omap ##type (void) \ -{ \ - return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ -} - -IS_OMAP_TYPE(310, 0x0310) -IS_OMAP_TYPE(730, 0x0730) -IS_OMAP_TYPE(1510, 0x1510) -IS_OMAP_TYPE(1610, 0x1610) -IS_OMAP_TYPE(1611, 0x1611) -IS_OMAP_TYPE(5912, 0x1611) -IS_OMAP_TYPE(1621, 0x1621) -IS_OMAP_TYPE(1710, 0x1710) -IS_OMAP_TYPE(2420, 0x2420) -IS_OMAP_TYPE(2422, 0x2422) -IS_OMAP_TYPE(2423, 0x2423) -IS_OMAP_TYPE(2430, 0x2430) -IS_OMAP_TYPE(3430, 0x3430) - -#define cpu_is_omap310() 0 -#define cpu_is_omap730() 0 -#define cpu_is_omap1510() 0 -#define cpu_is_omap1610() 0 -#define cpu_is_omap5912() 0 -#define cpu_is_omap1611() 0 -#define cpu_is_omap1621() 0 -#define cpu_is_omap1710() 0 -#define cpu_is_omap2420() 0 -#define cpu_is_omap2422() 0 -#define cpu_is_omap2423() 0 -#define cpu_is_omap2430() 0 -#define cpu_is_omap3430() 0 - -#if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() is_omap730() -# endif -#else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap730 -# define cpu_is_omap730() 1 -# endif -#endif - -/* - * Whether we have MULTI_OMAP1 or not, we still need to distinguish - * between 330 vs. 1510 and 1611B/5912 vs. 1710. - */ -#if defined(CONFIG_ARCH_OMAP15XX) -# undef cpu_is_omap310 -# undef cpu_is_omap1510 -# define cpu_is_omap310() is_omap310() -# define cpu_is_omap1510() is_omap1510() -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) -# undef cpu_is_omap1610 -# undef cpu_is_omap1611 -# undef cpu_is_omap5912 -# undef cpu_is_omap1621 -# undef cpu_is_omap1710 -# define cpu_is_omap1610() is_omap1610() -# define cpu_is_omap1611() is_omap1611() -# define cpu_is_omap5912() is_omap5912() -# define cpu_is_omap1621() is_omap1621() -# define cpu_is_omap1710() is_omap1710() -#endif - -#if defined(CONFIG_ARCH_OMAP24XX) -# undef cpu_is_omap2420 -# undef cpu_is_omap2422 -# undef cpu_is_omap2423 -# undef cpu_is_omap2430 -# define cpu_is_omap2420() is_omap2420() -# define cpu_is_omap2422() is_omap2422() -# define cpu_is_omap2423() is_omap2423() -# define cpu_is_omap2430() is_omap2430() -#endif - -#if defined(CONFIG_ARCH_OMAP34XX) -# undef cpu_is_omap3430 -# define cpu_is_omap3430() is_omap3430() -#endif - -/* Macros to detect if we have OMAP1 or OMAP2 */ -#define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ - cpu_is_omap16xx()) -#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) - -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) -/* - * Macros to detect silicon revision of OMAP2/3 processors. - * is_sil_rev_greater_than: true if passed cpu type & its rev is greater. - * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser. - * is_sil_rev_equal_to: true if passed cpu type & its rev is equal. - * get_sil_rev: return the silicon rev value. - */ -#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16) -#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12) - -#define is_sil_rev_greater_than(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) > get_sil_revision(rev))) - -#define is_sil_rev_less_than(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) < get_sil_revision(rev))) - -#define is_sil_rev_equal_to(rev) \ - ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ - (get_sil_revision(system_rev) == get_sil_revision(rev))) - -#define get_sil_rev() \ - get_sil_revision(system_rev) - -/* Various silicon macros defined here */ -#define OMAP2420_REV_ES1_0 0x24200000 -#define OMAP2420_REV_ES2_0 0x24201000 -#define OMAP2430_REV_ES1_0 0x24300000 -#define OMAP3430_REV_ES1_0 0x34300000 -#define OMAP3430_REV_ES2_0 0x34301000 -#define OMAP3430_REV_ES2_1 0x34302000 -#define OMAP3430_REV_ES2_2 0x34303000 - -/* - * omap_chip bits - * - * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is - * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates - * something that is only valid on that particular ES revision. - * - * These bits may be ORed together to indicate structures that are - * available on multiple chip types. - * - * To test whether a particular structure matches the current OMAP chip type, - * use omap_chip_is(). - * - */ -#define CHIP_IS_OMAP2420 (1 << 0) -#define CHIP_IS_OMAP2430 (1 << 1) -#define CHIP_IS_OMAP3430 (1 << 2) -#define CHIP_IS_OMAP3430ES1 (1 << 3) -#define CHIP_IS_OMAP3430ES2 (1 << 4) - -#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) - -int omap_chip_is(struct omap_chip_id oci); - - -/* - * Macro to detect device type i.e. EMU/HS/TST/GP/BAD - */ -#define DEVICE_TYPE_TEST 0 -#define DEVICE_TYPE_EMU 1 -#define DEVICE_TYPE_SEC 2 -#define DEVICE_TYPE_GP 3 -#define DEVICE_TYPE_BAD 4 - -#define get_device_type() ((system_rev & 0x700) >> 8) -#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST) -#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU) -#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC) -#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP) -#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD) - -void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ - -#endif diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S deleted file mode 100644 index ca4f577f9675..000000000000 --- a/include/asm-arm/arch-omap/debug-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-omap/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? -#ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00004000 @ UART 3 -#endif -#endif - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends - and \rd, \rd, #0x60 - teq \rd, #0x60 - beq 1002f - ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only - and \rd, \rd, #0x60 - teq \rd, #0x60 - bne 1001b -1002: - .endm - - .macro waituart,rd,rx - .endm diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h deleted file mode 100644 index f4dcb9587869..000000000000 --- a/include/asm-arm/arch-omap/dma.h +++ /dev/null @@ -1,570 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/dma.h - * - * Copyright (C) 2003 Nokia Corporation - * Author: Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* Hardware registers for omap1 */ -#define OMAP1_DMA_BASE (0xfffed800) - -#define OMAP1_DMA_GCR 0x400 -#define OMAP1_DMA_GSCR 0x404 -#define OMAP1_DMA_GRST 0x408 -#define OMAP1_DMA_HW_ID 0x442 -#define OMAP1_DMA_PCH2_ID 0x444 -#define OMAP1_DMA_PCH0_ID 0x446 -#define OMAP1_DMA_PCH1_ID 0x448 -#define OMAP1_DMA_PCHG_ID 0x44a -#define OMAP1_DMA_PCHD_ID 0x44c -#define OMAP1_DMA_CAPS_0_U 0x44e -#define OMAP1_DMA_CAPS_0_L 0x450 -#define OMAP1_DMA_CAPS_1_U 0x452 -#define OMAP1_DMA_CAPS_1_L 0x454 -#define OMAP1_DMA_CAPS_2 0x456 -#define OMAP1_DMA_CAPS_3 0x458 -#define OMAP1_DMA_CAPS_4 0x45a -#define OMAP1_DMA_PCH2_SR 0x460 -#define OMAP1_DMA_PCH0_SR 0x480 -#define OMAP1_DMA_PCH1_SR 0x482 -#define OMAP1_DMA_PCHD_SR 0x4c0 - -/* Hardware registers for omap2 and omap3 */ -#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000) -#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000) - -#define OMAP_DMA4_REVISION 0x00 -#define OMAP_DMA4_GCR 0x78 -#define OMAP_DMA4_IRQSTATUS_L0 0x08 -#define OMAP_DMA4_IRQSTATUS_L1 0x0c -#define OMAP_DMA4_IRQSTATUS_L2 0x10 -#define OMAP_DMA4_IRQSTATUS_L3 0x14 -#define OMAP_DMA4_IRQENABLE_L0 0x18 -#define OMAP_DMA4_IRQENABLE_L1 0x1c -#define OMAP_DMA4_IRQENABLE_L2 0x20 -#define OMAP_DMA4_IRQENABLE_L3 0x24 -#define OMAP_DMA4_SYSSTATUS 0x28 -#define OMAP_DMA4_OCP_SYSCONFIG 0x2c -#define OMAP_DMA4_CAPS_0 0x64 -#define OMAP_DMA4_CAPS_2 0x6c -#define OMAP_DMA4_CAPS_3 0x70 -#define OMAP_DMA4_CAPS_4 0x74 - -#define OMAP1_LOGICAL_DMA_CH_COUNT 17 -#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ - -/* Common channel specific registers for omap1 */ -#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00) -#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02) -#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04) -#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06) -#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10) -#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12) -#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14) -#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16) -#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */ -#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18) -#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a) -#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c) -#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e) -#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28) - -/* Common channel specific registers for omap2 */ -#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80) -#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84) -#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88) -#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c) -#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90) -#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94) -#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98) -#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4) -#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8) -#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac) -#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0) -#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4) -#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8) - -/* Channel specific registers only on omap1 */ -#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08) -#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a) -#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c) -#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e) -#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20) -#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22) -#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24) -#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */ -#define OMAP1_DMA_CCEN(n) 0 -#define OMAP1_DMA_CCFN(n) 0 - -/* Channel specific registers only on omap2 */ -#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c) -#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0) -#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc) -#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0) -#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4) - -/* Dummy defines to keep multi-omap compiles happy */ -#define OMAP1_DMA_REVISION 0 -#define OMAP1_DMA_IRQSTATUS_L0 0 -#define OMAP1_DMA_IRQENABLE_L0 0 -#define OMAP1_DMA_OCP_SYSCONFIG 0 -#define OMAP_DMA4_HW_ID 0 -#define OMAP_DMA4_CAPS_0_L 0 -#define OMAP_DMA4_CAPS_0_U 0 -#define OMAP_DMA4_CAPS_1_L 0 -#define OMAP_DMA4_CAPS_1_U 0 -#define OMAP_DMA4_GSCR 0 -#define OMAP_DMA4_CPC(n) 0 - -#define OMAP_DMA4_LCH_CTRL(n) 0 -#define OMAP_DMA4_COLOR_L(n) 0 -#define OMAP_DMA4_COLOR_U(n) 0 -#define OMAP_DMA4_CCR2(n) 0 -#define OMAP1_DMA_CSSA(n) 0 -#define OMAP1_DMA_CDSA(n) 0 -#define OMAP_DMA4_CSSA_L(n) 0 -#define OMAP_DMA4_CSSA_U(n) 0 -#define OMAP_DMA4_CDSA_L(n) 0 -#define OMAP_DMA4_CDSA_U(n) 0 - -/*----------------------------------------------------------------------------*/ - -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -/*----------------------------------------------------------------------------*/ - -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - -#define OMAP1_DMA_TOUT_IRQ (1 << 0) -#define OMAP_DMA_DROP_IRQ (1 << 1) -#define OMAP_DMA_HALF_IRQ (1 << 2) -#define OMAP_DMA_FRAME_IRQ (1 << 3) -#define OMAP_DMA_LAST_IRQ (1 << 4) -#define OMAP_DMA_BLOCK_IRQ (1 << 5) -#define OMAP1_DMA_SYNC_IRQ (1 << 6) -#define OMAP2_DMA_PKT_IRQ (1 << 7) -#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) -#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) -#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) -#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) - -#define OMAP_DMA_DATA_TYPE_S8 0x00 -#define OMAP_DMA_DATA_TYPE_S16 0x01 -#define OMAP_DMA_DATA_TYPE_S32 0x02 - -#define OMAP_DMA_SYNC_ELEMENT 0x00 -#define OMAP_DMA_SYNC_FRAME 0x01 -#define OMAP_DMA_SYNC_BLOCK 0x02 -#define OMAP_DMA_SYNC_PACKET 0x03 - -#define OMAP_DMA_SRC_SYNC 0x01 -#define OMAP_DMA_DST_SYNC 0x00 - -#define OMAP_DMA_PORT_EMIFF 0x00 -#define OMAP_DMA_PORT_EMIFS 0x01 -#define OMAP_DMA_PORT_OCP_T1 0x02 -#define OMAP_DMA_PORT_TIPB 0x03 -#define OMAP_DMA_PORT_OCP_T2 0x04 -#define OMAP_DMA_PORT_MPUI 0x05 - -#define OMAP_DMA_AMODE_CONSTANT 0x00 -#define OMAP_DMA_AMODE_POST_INC 0x01 -#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 -#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 - -#define DMA_DEFAULT_FIFO_DEPTH 0x10 -#define DMA_DEFAULT_ARB_RATE 0x01 -/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ -#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ -#define DMA_THREAD_RESERVE_ONET (0x01 << 12) -#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) -#define DMA_THREAD_RESERVE_THREET (0x03 << 12) -#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ -#define DMA_THREAD_FIFO_75 (0x01 << 14) -#define DMA_THREAD_FIFO_25 (0x02 << 14) -#define DMA_THREAD_FIFO_50 (0x03 << 14) - -/* Chaining modes*/ -#ifndef CONFIG_ARCH_OMAP1 -#define OMAP_DMA_STATIC_CHAIN 0x1 -#define OMAP_DMA_DYNAMIC_CHAIN 0x2 -#define OMAP_DMA_CHAIN_ACTIVE 0x1 -#define OMAP_DMA_CHAIN_INACTIVE 0x0 -#endif - -#define DMA_CH_PRIO_HIGH 0x1 -#define DMA_CH_PRIO_LOW 0x0 /* Def */ - -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - -enum omap_dma_burst_mode { - OMAP_DMA_DATA_BURST_DIS = 0, - OMAP_DMA_DATA_BURST_4, - OMAP_DMA_DATA_BURST_8, - OMAP_DMA_DATA_BURST_16, -}; - -enum end_type { - OMAP_DMA_LITTLE_ENDIAN = 0, - OMAP_DMA_BIG_ENDIAN -}; - -enum omap_dma_color_mode { - OMAP_DMA_COLOR_DIS = 0, - OMAP_DMA_CONSTANT_FILL, - OMAP_DMA_TRANSPARENT_COPY -}; - -enum omap_dma_write_mode { - OMAP_DMA_WRITE_NON_POSTED = 0, - OMAP_DMA_WRITE_POSTED, - OMAP_DMA_WRITE_LAST_NON_POSTED -}; - -enum omap_dma_channel_mode { - OMAP_DMA_LCH_2D = 0, - OMAP_DMA_LCH_G, - OMAP_DMA_LCH_P, - OMAP_DMA_LCH_PD -}; - -struct omap_dma_channel_params { - int data_type; /* data type 8,16,32 */ - int elem_count; /* number of elements in a frame */ - int frame_count; /* number of frames in a element */ - - int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int src_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long src_start; /* source address : physical */ - int src_ei; /* source element index */ - int src_fi; /* source frame index */ - - int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ - int dst_amode; /* constant, post increment, indexed, - double indexed */ - unsigned long dst_start; /* source address : physical */ - int dst_ei; /* source element index */ - int dst_fi; /* source frame index */ - - int trigger; /* trigger attached if the channel is - synchronized */ - int sync_mode; /* sycn on element, frame , block or packet */ - int src_or_dst_synch; /* source synch(1) or destination synch(0) */ - - int ie; /* interrupt enabled */ - - unsigned char read_prio;/* read priority */ - unsigned char write_prio;/* write priority */ - -#ifndef CONFIG_ARCH_OMAP1 - enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ -#endif -}; - - -extern void omap_set_dma_priority(int lch, int dst_port, int priority); -extern int omap_request_dma(int dev_id, const char *dev_name, - void (*callback)(int lch, u16 ch_status, void *data), - void *data, int *dma_ch); -extern void omap_enable_dma_irq(int ch, u16 irq_bits); -extern void omap_disable_dma_irq(int ch, u16 irq_bits); -extern void omap_free_dma(int ch); -extern void omap_start_dma(int lch); -extern void omap_stop_dma(int lch); -extern void omap_set_dma_transfer_params(int lch, int data_type, - int elem_count, int frame_count, - int sync_mode, - int dma_trigger, int src_or_dst_synch); -extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, - u32 color); -extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); -extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); - -extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, - unsigned long src_start, - int src_ei, int src_fi); -extern void omap_set_dma_src_index(int lch, int eidx, int fidx); -extern void omap_set_dma_src_data_pack(int lch, int enable); -extern void omap_set_dma_src_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, - unsigned long dest_start, - int dst_ei, int dst_fi); -extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); -extern void omap_set_dma_dest_data_pack(int lch, int enable); -extern void omap_set_dma_dest_burst_mode(int lch, - enum omap_dma_burst_mode burst_mode); - -extern void omap_set_dma_params(int lch, - struct omap_dma_channel_params *params); - -extern void omap_dma_link_lch(int lch_head, int lch_queue); -extern void omap_dma_unlink_lch(int lch_head, int lch_queue); - -extern int omap_set_dma_callback(int lch, - void (*callback)(int lch, u16 ch_status, void *data), - void *data); -extern dma_addr_t omap_get_dma_src_pos(int lch); -extern dma_addr_t omap_get_dma_dst_pos(int lch); -extern void omap_clear_dma(int lch); -extern int omap_get_dma_active_status(int lch); -extern int omap_dma_running(void); -extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, - int tparams); -extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, - unsigned char write_prio); -extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); -extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); -extern int omap_get_dma_index(int lch, int *ei, int *fi); - -/* Chaining APIs */ -#ifndef CONFIG_ARCH_OMAP1 -extern int omap_request_dma_chain(int dev_id, const char *dev_name, - void (*callback) (int chain_id, u16 ch_status, - void *data), - int *chain_id, int no_of_chans, - int chain_mode, - struct omap_dma_channel_params params); -extern int omap_free_dma_chain(int chain_id); -extern int omap_dma_chain_a_transfer(int chain_id, int src_start, - int dest_start, int elem_count, - int frame_count, void *callbk_data); -extern int omap_start_dma_chain_transfers(int chain_id); -extern int omap_stop_dma_chain_transfers(int chain_id); -extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); -extern int omap_get_dma_chain_dst_pos(int chain_id); -extern int omap_get_dma_chain_src_pos(int chain_id); - -extern int omap_modify_dma_chain_params(int chain_id, - struct omap_dma_channel_params params); -extern int omap_dma_chain_status(int chain_id); -#endif - -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h deleted file mode 100644 index 02b29e8437ae..000000000000 --- a/include/asm-arm/arch-omap/dmtimer.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/dmtimer.h - * - * OMAP Dual-Mode Timers - * - * Copyright (C) 2005 Nokia Corporation - * Author: Lauri Leukkunen - * PWM and clock framwork support by Timo Teras. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_DMTIMER_H -#define __ASM_ARCH_DMTIMER_H - -/* clock sources */ -#define OMAP_TIMER_SRC_SYS_CLK 0x00 -#define OMAP_TIMER_SRC_32_KHZ 0x01 -#define OMAP_TIMER_SRC_EXT_CLK 0x02 - -/* timer interrupt enable bits */ -#define OMAP_TIMER_INT_CAPTURE (1 << 2) -#define OMAP_TIMER_INT_OVERFLOW (1 << 1) -#define OMAP_TIMER_INT_MATCH (1 << 0) - -/* trigger types */ -#define OMAP_TIMER_TRIGGER_NONE 0x00 -#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01 -#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02 - -struct omap_dm_timer; -struct clk; - -int omap_dm_timer_init(void); - -struct omap_dm_timer *omap_dm_timer_request(void); -struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); -void omap_dm_timer_free(struct omap_dm_timer *timer); -void omap_dm_timer_enable(struct omap_dm_timer *timer); -void omap_dm_timer_disable(struct omap_dm_timer *timer); - -int omap_dm_timer_get_irq(struct omap_dm_timer *timer); - -u32 omap_dm_timer_modify_idlect_mask(u32 inputmask); -struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer); - -void omap_dm_timer_trigger(struct omap_dm_timer *timer); -void omap_dm_timer_start(struct omap_dm_timer *timer); -void omap_dm_timer_stop(struct omap_dm_timer *timer); - -void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source); -void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value); -void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match); -void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger); -void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler); - -void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value); - -unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer); -void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value); -unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer); -void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value); - -int omap_dm_timers_active(void); - - -#endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h deleted file mode 100644 index da97736f3efa..000000000000 --- a/include/asm-arm/arch-omap/dsp_common.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1) - * - * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved. - * - * Contact: Toshihiro Kobayashi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef ASM_ARCH_DSP_COMMON_H -#define ASM_ARCH_DSP_COMMON_H - -#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK) -extern void omap_dsp_request_mpui(void); -extern void omap_dsp_release_mpui(void); -extern int omap_dsp_request_mem(void); -extern int omap_dsp_release_mem(void); -#else -static inline int omap_dsp_request_mem(void) -{ - return 0; -} -#define omap_dsp_release_mem() do {} while (0) -#endif - -#endif /* ASM_ARCH_DSP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/eac.h b/include/asm-arm/arch-omap/eac.h deleted file mode 100644 index ccee3b0700b3..000000000000 --- a/include/asm-arm/arch-omap/eac.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap2/eac.h - * - * Defines for Enhanced Audio Controller - * - * Contact: Jarkko Nikula - * - * Copyright (C) 2006 Nokia Corporation - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H -#define __ASM_ARM_ARCH_OMAP2_EAC_H - -#include -#include -#include - -#include - -/* master codec clock source */ -#define EAC_MCLK_EXT_MASK 0x100 -enum eac_mclk_src { - EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */ - EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK, - EAC_MCLK_EXT_12288000, - EAC_MCLK_EXT_2x11289600, - EAC_MCLK_EXT_2x12288000, -}; - -/* codec port interface mode */ -enum eac_codec_mode { - EAC_CODEC_PCM, - EAC_CODEC_AC97, - EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */ - EAC_CODEC_I2S_SLAVE, -}; - -/* configuration structure for I2S mode */ -struct eac_i2s_conf { - /* if enabled, then first data slot (left channel) is signaled as - * positive level of frame sync EAC.AC_FS */ - unsigned polarity_changed_mode:1; - /* if enabled, then serial data starts one clock cycle after the - * of EAC.AC_FS for first audio slot */ - unsigned sync_delay_enable:1; -}; - -/* configuration structure for EAC codec port */ -struct eac_codec { - enum eac_mclk_src mclk_src; - - enum eac_codec_mode codec_mode; - union { - struct eac_i2s_conf i2s; - } codec_conf; - - int default_rate; /* audio sampling rate */ - - int (* set_power)(void *private_data, int dac, int adc); - int (* register_controls)(void *private_data, - struct snd_card *card); - const char *short_name; - - void *private_data; -}; - -/* structure for passing platform dependent data to the EAC driver */ -struct eac_platform_data { - int (* init)(struct device *eac_dev); - void (* cleanup)(struct device *eac_dev); - /* these callbacks are used to configure & control external MCLK - * source. NULL if not used */ - int (* enable_ext_clocks)(struct device *eac_dev); - void (* disable_ext_clocks)(struct device *eac_dev); -}; - -extern void omap_init_eac(struct eac_platform_data *pdata); - -extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec); -extern void eac_unregister_codec(struct device *eac_dev); - -extern int eac_set_mode(struct device *eac_dev, int play, int rec); - -#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */ diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S deleted file mode 100644 index 67ed7839e782..000000000000 --- a/include/asm-arm/arch-omap/entry-macro.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-arm/arch-omap/entry-macro.S - * - * Low-level IRQ helper macros for OMAP-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include - -#if defined(CONFIG_ARCH_OMAP1) - -#if defined(CONFIG_ARCH_OMAP730) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) -#define INT_IH2_IRQ INT_730_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#endif - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ - ldreq \base, =IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - -#elif defined(CONFIG_ARCH_OMAP24XX) - -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP2_VA_IC_BASE - ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */ - cmp \irqnr, #0x0 - bne 2222f - ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ - cmp \irqnr, #0x0 -2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] - - .endm - - .macro irq_prio_table - .endm - -#endif diff --git a/include/asm-arm/arch-omap/fpga.h b/include/asm-arm/arch-omap/fpga.h deleted file mode 100644 index f420881d2a3b..000000000000 --- a/include/asm-arm/arch-omap/fpga.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/fpga.h - * - * Interrupt handler for OMAP-1510 FPGA - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Copyright (C) 2002 MontaVista Software, Inc. - * - * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 - * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_FPGA_H -#define __ASM_ARCH_OMAP_FPGA_H - -#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX) -extern void omap1510_fpga_init_irq(void); -#else -#define omap1510_fpga_init_irq() (0) -#endif - -#define fpga_read(reg) __raw_readb(reg) -#define fpga_write(val, reg) __raw_writeb(val, reg) - -/* - * --------------------------------------------------------------------------- - * H2/P2 Debug board FPGA - * --------------------------------------------------------------------------- - */ -/* maps in the FPGA registers and the ETHR registers */ -#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */ -#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */ -#define H2P2_DBG_FPGA_START 0x04000000 /* PA */ - -#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300) -#define H2P2_DBG_FPGA_FPGA_REV (H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */ -#define H2P2_DBG_FPGA_BOARD_REV (H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */ -#define H2P2_DBG_FPGA_GPIO (H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */ -#define H2P2_DBG_FPGA_LEDS (H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */ -#define H2P2_DBG_FPGA_MISC_INPUTS (H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */ -#define H2P2_DBG_FPGA_LAN_STATUS (H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */ -#define H2P2_DBG_FPGA_LAN_RESET (H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */ - -/* NOTE: most boards don't have a static mapping for the FPGA ... */ -struct h2p2_dbg_fpga { - /* offset 0x00 */ - u16 smc91x[8]; - /* offset 0x10 */ - u16 fpga_rev; - u16 board_rev; - u16 gpio_outputs; - u16 leds; - /* offset 0x18 */ - u16 misc_inputs; - u16 lan_status; - u16 lan_reset; - u16 reserved0; - /* offset 0x20 */ - u16 ps2_data; - u16 ps2_ctrl; - /* plus also 4 rs232 ports ... */ -}; - -/* LEDs definition on debug board (16 LEDs, all physically green) */ -#define H2P2_DBG_FPGA_LED_GREEN (1 << 15) -#define H2P2_DBG_FPGA_LED_AMBER (1 << 14) -#define H2P2_DBG_FPGA_LED_RED (1 << 13) -#define H2P2_DBG_FPGA_LED_BLUE (1 << 12) -/* cpu0 load-meter LEDs */ -#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ... -#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11 -#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1) - -#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0) -#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1) - -/* - * --------------------------------------------------------------------------- - * OMAP-1510 FPGA - * --------------------------------------------------------------------------- - */ -#define OMAP1510_FPGA_BASE 0xE8000000 /* Virtual */ -#define OMAP1510_FPGA_SIZE SZ_4K -#define OMAP1510_FPGA_START 0x08000000 /* Physical */ - -/* Revision */ -#define OMAP1510_FPGA_REV_LOW (OMAP1510_FPGA_BASE + 0x0) -#define OMAP1510_FPGA_REV_HIGH (OMAP1510_FPGA_BASE + 0x1) - -#define OMAP1510_FPGA_LCD_PANEL_CONTROL (OMAP1510_FPGA_BASE + 0x2) -#define OMAP1510_FPGA_LED_DIGIT (OMAP1510_FPGA_BASE + 0x3) -#define INNOVATOR_FPGA_HID_SPI (OMAP1510_FPGA_BASE + 0x4) -#define OMAP1510_FPGA_POWER (OMAP1510_FPGA_BASE + 0x5) - -/* Interrupt status */ -#define OMAP1510_FPGA_ISR_LO (OMAP1510_FPGA_BASE + 0x6) -#define OMAP1510_FPGA_ISR_HI (OMAP1510_FPGA_BASE + 0x7) - -/* Interrupt mask */ -#define OMAP1510_FPGA_IMR_LO (OMAP1510_FPGA_BASE + 0x8) -#define OMAP1510_FPGA_IMR_HI (OMAP1510_FPGA_BASE + 0x9) - -/* Reset registers */ -#define OMAP1510_FPGA_HOST_RESET (OMAP1510_FPGA_BASE + 0xa) -#define OMAP1510_FPGA_RST (OMAP1510_FPGA_BASE + 0xb) - -#define OMAP1510_FPGA_AUDIO (OMAP1510_FPGA_BASE + 0xc) -#define OMAP1510_FPGA_DIP (OMAP1510_FPGA_BASE + 0xe) -#define OMAP1510_FPGA_FPGA_IO (OMAP1510_FPGA_BASE + 0xf) -#define OMAP1510_FPGA_UART1 (OMAP1510_FPGA_BASE + 0x14) -#define OMAP1510_FPGA_UART2 (OMAP1510_FPGA_BASE + 0x15) -#define OMAP1510_FPGA_OMAP1510_STATUS (OMAP1510_FPGA_BASE + 0x16) -#define OMAP1510_FPGA_BOARD_REV (OMAP1510_FPGA_BASE + 0x18) -#define OMAP1510P1_PPT_DATA (OMAP1510_FPGA_BASE + 0x100) -#define OMAP1510P1_PPT_STATUS (OMAP1510_FPGA_BASE + 0x101) -#define OMAP1510P1_PPT_CONTROL (OMAP1510_FPGA_BASE + 0x102) - -#define OMAP1510_FPGA_TOUCHSCREEN (OMAP1510_FPGA_BASE + 0x204) - -#define INNOVATOR_FPGA_INFO (OMAP1510_FPGA_BASE + 0x205) -#define INNOVATOR_FPGA_LCD_BRIGHT_LO (OMAP1510_FPGA_BASE + 0x206) -#define INNOVATOR_FPGA_LCD_BRIGHT_HI (OMAP1510_FPGA_BASE + 0x207) -#define INNOVATOR_FPGA_LED_GRN_LO (OMAP1510_FPGA_BASE + 0x208) -#define INNOVATOR_FPGA_LED_GRN_HI (OMAP1510_FPGA_BASE + 0x209) -#define INNOVATOR_FPGA_LED_RED_LO (OMAP1510_FPGA_BASE + 0x20a) -#define INNOVATOR_FPGA_LED_RED_HI (OMAP1510_FPGA_BASE + 0x20b) -#define INNOVATOR_FPGA_CAM_USB_CONTROL (OMAP1510_FPGA_BASE + 0x20c) -#define INNOVATOR_FPGA_EXP_CONTROL (OMAP1510_FPGA_BASE + 0x20d) -#define INNOVATOR_FPGA_ISR2 (OMAP1510_FPGA_BASE + 0x20e) -#define INNOVATOR_FPGA_IMR2 (OMAP1510_FPGA_BASE + 0x210) - -#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300) - -/* - * Power up Giga UART driver, turn on HID clock. - * Turn off BT power, since we're not using it and it - * draws power. - */ -#define OMAP1510_FPGA_RESET_VALUE 0x42 - -#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7) -#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6) -#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5) -#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4) -#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3) -#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2) -#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1) -#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0) - -/* - * Innovator/OMAP1510 FPGA HID register bit definitions - */ -#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */ -#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */ -#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */ -#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */ -#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */ -#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */ -#define OMAP1510_FPGA_HID_rsrvd (1<<6) -#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */ - -/* The FPGA IRQ is cascaded through GPIO_13 */ -#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13) - -/* IRQ Numbers for interrupts muxed through the FPGA */ -#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0) -#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1) -#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2) -#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3) -#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4) -#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5) -#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6) -#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7) -#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8) -#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9) -#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10) -#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11) -#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12) -#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13) -#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14) -#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15) -#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16) -#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17) -#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18) -#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19) -#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20) -#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21) -#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22) -#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23) - -#endif diff --git a/include/asm-arm/arch-omap/gpio-switch.h b/include/asm-arm/arch-omap/gpio-switch.h deleted file mode 100644 index 10da0e07c0cf..000000000000 --- a/include/asm-arm/arch-omap/gpio-switch.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * GPIO switch definitions - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H -#define __ASM_ARCH_OMAP_GPIO_SWITCH_H - -#include - -/* Cover: - * high -> closed - * low -> open - * Connection: - * high -> connected - * low -> disconnected - * Activity: - * high -> active - * low -> inactive - * - */ -#define OMAP_GPIO_SWITCH_TYPE_COVER 0x0000 -#define OMAP_GPIO_SWITCH_TYPE_CONNECTION 0x0001 -#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY 0x0002 -#define OMAP_GPIO_SWITCH_FLAG_INVERTED 0x0001 -#define OMAP_GPIO_SWITCH_FLAG_OUTPUT 0x0002 - -struct omap_gpio_switch { - const char *name; - s16 gpio; - unsigned flags:4; - unsigned type:4; - - /* Time in ms to debounce when transitioning from - * inactive state to active state. */ - u16 debounce_rising; - /* Same for transition from active to inactive state. */ - u16 debounce_falling; - - /* notify board-specific code about state changes */ - void (* notify)(void *data, int state); - void *notify_data; -}; - -/* Call at init time only */ -extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl, - int count); - -#endif diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h deleted file mode 100644 index 5ee6a49864c3..000000000000 --- a/include/asm-arm/arch-omap/gpio.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/gpio.h - * - * OMAP GPIO handling defines and functions - * - * Copyright (C) 2003-2005 Nokia Corporation - * - * Written by Juha Yrjölä - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP_GPIO_H -#define __ASM_ARCH_OMAP_GPIO_H - -#include -#include - -#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000 - -#ifdef CONFIG_ARCH_OMAP730 -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x02 -#define OMAP_MPUIO_IO_CNTL 0x04 -#define OMAP_MPUIO_KBR_LATCH 0x08 -#define OMAP_MPUIO_KBC 0x0a -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c -#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e -#define OMAP_MPUIO_KBD_INT 0x10 -#define OMAP_MPUIO_GPIO_INT 0x12 -#define OMAP_MPUIO_KBD_MASKIT 0x14 -#define OMAP_MPUIO_GPIO_MASKIT 0x16 -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18 -#define OMAP_MPUIO_LATCH 0x1a -#else -#define OMAP_MPUIO_INPUT_LATCH 0x00 -#define OMAP_MPUIO_OUTPUT 0x04 -#define OMAP_MPUIO_IO_CNTL 0x08 -#define OMAP_MPUIO_KBR_LATCH 0x10 -#define OMAP_MPUIO_KBC 0x14 -#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 -#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c -#define OMAP_MPUIO_KBD_INT 0x20 -#define OMAP_MPUIO_GPIO_INT 0x24 -#define OMAP_MPUIO_KBD_MASKIT 0x28 -#define OMAP_MPUIO_GPIO_MASKIT 0x2c -#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 -#define OMAP_MPUIO_LATCH 0x34 -#endif - -#define OMAP34XX_NR_GPIOS 6 - -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - -#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ - IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + (nr)) - -extern int omap_gpio_init(void); /* Call from board init only */ -extern int omap_request_gpio(int gpio); -extern void omap_free_gpio(int gpio); -extern void omap_set_gpio_direction(int gpio, int is_input); -extern void omap_set_gpio_dataout(int gpio, int enable); -extern int omap_get_gpio_datain(int gpio); -extern void omap_set_gpio_debounce(int gpio, int enable); -extern void omap_set_gpio_debounce_time(int gpio, int enable); - -/*-------------------------------------------------------------------------*/ - -/* Wrappers for "new style" GPIO calls, using the new infrastructure - * which lets us plug in FPGA, I2C, and other implementations. - * * - * The original OMAP-specfic calls should eventually be removed. - */ - -#include -#include - -static inline int gpio_get_value(unsigned gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - return __gpio_cansleep(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - if (gpio < (OMAP_MAX_GPIO_LINES + 16)) - return OMAP_GPIO_IRQ(gpio); - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - return irq - IH_GPIO_BASE; -} - -#endif diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h deleted file mode 100644 index 4eed1f80e2fb..000000000000 --- a/include/asm-arm/arch-omap/gpioexpander.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/gpioexpander.h - * - * - * Copyright (C) 2004 Texas Instruments, Inc. - * - * This package is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H -#define __ASM_ARCH_OMAP_GPIOEXPANDER_H - -/* Function Prototypes for GPIO Expander functions */ - -#ifdef CONFIG_GPIOEXPANDER_OMAP -int read_gpio_expa(u8 *, int); -int write_gpio_expa(u8 , int); -#else -static inline int read_gpio_expa(u8 *val, int addr) -{ - return 0; -} -static inline int write_gpio_expa(u8 val, int addr) -{ - return 0; -} -#endif - -#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */ diff --git a/include/asm-arm/arch-omap/gpmc.h b/include/asm-arm/arch-omap/gpmc.h deleted file mode 100644 index 6a8e07ffc2d0..000000000000 --- a/include/asm-arm/arch-omap/gpmc.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * General-Purpose Memory Controller for OMAP2 - * - * Copyright (C) 2005-2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_GPMC_H -#define __OMAP2_GPMC_H - -#define GPMC_CS_CONFIG1 0x00 -#define GPMC_CS_CONFIG2 0x04 -#define GPMC_CS_CONFIG3 0x08 -#define GPMC_CS_CONFIG4 0x0c -#define GPMC_CS_CONFIG5 0x10 -#define GPMC_CS_CONFIG6 0x14 -#define GPMC_CS_CONFIG7 0x18 -#define GPMC_CS_NAND_COMMAND 0x1c -#define GPMC_CS_NAND_ADDRESS 0x20 -#define GPMC_CS_NAND_DATA 0x24 - -#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31) -#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30) -#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) -#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29) -#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28) -#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) -#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) -#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) -#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) -#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) -#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) -#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) -#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) -#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) -#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) -#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) -#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) -#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) -#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) -#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) -#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) - -/* - * Note that all values in this struct are in nanoseconds, while - * the register values are in gpmc_fck cycles. - */ -struct gpmc_timings { - /* Minimum clock period for synchronous mode */ - u16 sync_clk; - - /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ - u16 cs_on; /* Assertion time */ - u16 cs_rd_off; /* Read deassertion time */ - u16 cs_wr_off; /* Write deassertion time */ - - /* ADV signal timings corresponding to GPMC_CONFIG3 */ - u16 adv_on; /* Assertion time */ - u16 adv_rd_off; /* Read deassertion time */ - u16 adv_wr_off; /* Write deassertion time */ - - /* WE signals timings corresponding to GPMC_CONFIG4 */ - u16 we_on; /* WE assertion time */ - u16 we_off; /* WE deassertion time */ - - /* OE signals timings corresponding to GPMC_CONFIG4 */ - u16 oe_on; /* OE assertion time */ - u16 oe_off; /* OE deassertion time */ - - /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ - u16 page_burst_access; /* Multiple access word delay */ - u16 access; /* Start-cycle to first data valid delay */ - u16 rd_cycle; /* Total read cycle time */ - u16 wr_cycle; /* Total write cycle time */ -}; - -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); - -extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); -extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); -extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); - -#endif diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h deleted file mode 100644 index 45fdfccbd5d4..000000000000 --- a/include/asm-arm/arch-omap/hardware.h +++ /dev/null @@ -1,355 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/hardware.h - * - * Hardware definitions for TI OMAP processors and boards - * - * NOTE: Please put device driver specific defines into a separate header - * file for each driver. - * - * Copyright (C) 2001 RidgeRun, Inc. - * Author: RidgeRun, Inc. Greg Lonnon - * - * Reorganized for Linux-2.6 by Tony Lindgren - * and Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_HARDWARE_H -#define __ASM_ARCH_OMAP_HARDWARE_H - -#include -#ifndef __ASSEMBLER__ -#include -#include -#endif -#include - -/* - * --------------------------------------------------------------------------- - * Common definitions for all OMAP processors - * NOTE: Put all processor or board specific parts to the special header - * files. - * --------------------------------------------------------------------------- - */ - -/* - * ---------------------------------------------------------------------------- - * Timers - * ---------------------------------------------------------------------------- - */ -#define OMAP_MPU_TIMER1_BASE (0xfffec500) -#define OMAP_MPU_TIMER2_BASE (0xfffec600) -#define OMAP_MPU_TIMER3_BASE (0xfffec700) -#define MPU_TIMER_FREE (1 << 6) -#define MPU_TIMER_CLOCK_ENABLE (1 << 5) -#define MPU_TIMER_AR (1 << 1) -#define MPU_TIMER_ST (1 << 0) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_BASE (0xfffece00) -#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) -#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) -#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) -#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) -#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) -#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) -#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) -#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -#define CK_RATEF 1 -#define CK_IDLEF 2 -#define CK_ENABLEF 4 -#define CK_SELECTF 8 -#define SETARM_IDLE_SHIFT - -/* DPLL control registers */ -#define DPLL_CTL (0xfffecf00) - -/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ -#define DSP_CONFIG_REG_BASE (0xe1008000) -#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) -#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) -#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) -#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) - -/* - * --------------------------------------------------------------------------- - * UPLD - * --------------------------------------------------------------------------- - */ -#define ULPD_REG_BASE (0xfffe0800) -#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) -#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) -#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) -# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ -# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ -#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) -# define SOFT_UDC_REQ (1 << 4) -# define SOFT_USB_CLK_REQ (1 << 3) -# define SOFT_DPLL_REQ (1 << 0) -#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) -#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) -#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) -#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) -#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) -# define DIS_MMC2_DPLL_REQ (1 << 11) -# define DIS_MMC1_DPLL_REQ (1 << 10) -# define DIS_UART3_DPLL_REQ (1 << 9) -# define DIS_UART2_DPLL_REQ (1 << 8) -# define DIS_UART1_DPLL_REQ (1 << 7) -# define DIS_USB_HOST_DPLL_REQ (1 << 6) -#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) -#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* Watchdog timer within the OMAP3.2 gigacell */ -#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) -#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) -#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) -#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_ARCH_OMAP1 - -/* - * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c - * or something similar.. -- PFM. - */ - -#define OMAP_IH1_BASE 0xfffecb00 -#define OMAP_IH2_BASE 0xfffe0000 - -#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) -#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) -#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) -#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) -#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) -#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) -#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) - -#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) -#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) -#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) -#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) -#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) -#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) -#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) - -#define IRQ_ITR_REG_OFFSET 0x00 -#define IRQ_MIR_REG_OFFSET 0x04 -#define IRQ_SIR_IRQ_REG_OFFSET 0x10 -#define IRQ_SIR_FIQ_REG_OFFSET 0x14 -#define IRQ_CONTROL_REG_OFFSET 0x18 -#define IRQ_ISR_REG_OFFSET 0x9c -#define IRQ_ILR0_REG_OFFSET 0x1c -#define IRQ_GMR_REG_OFFSET 0xa0 - -#endif - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define MOD_CONF_CTRL_0 0xfffe1080 -#define MOD_CONF_CTRL_1 0xfffe1110 - -/* - * ---------------------------------------------------------------------------- - * Pin multiplexing registers - * ---------------------------------------------------------------------------- - */ -#define FUNC_MUX_CTRL_0 0xfffe1000 -#define FUNC_MUX_CTRL_1 0xfffe1004 -#define FUNC_MUX_CTRL_2 0xfffe1008 -#define COMP_MODE_CTRL_0 0xfffe100c -#define FUNC_MUX_CTRL_3 0xfffe1010 -#define FUNC_MUX_CTRL_4 0xfffe1014 -#define FUNC_MUX_CTRL_5 0xfffe1018 -#define FUNC_MUX_CTRL_6 0xfffe101C -#define FUNC_MUX_CTRL_7 0xfffe1020 -#define FUNC_MUX_CTRL_8 0xfffe1024 -#define FUNC_MUX_CTRL_9 0xfffe1028 -#define FUNC_MUX_CTRL_A 0xfffe102C -#define FUNC_MUX_CTRL_B 0xfffe1030 -#define FUNC_MUX_CTRL_C 0xfffe1034 -#define FUNC_MUX_CTRL_D 0xfffe1038 -#define PULL_DWN_CTRL_0 0xfffe1040 -#define PULL_DWN_CTRL_1 0xfffe1044 -#define PULL_DWN_CTRL_2 0xfffe1048 -#define PULL_DWN_CTRL_3 0xfffe104c -#define PULL_DWN_CTRL_4 0xfffe10ac - -/* OMAP-1610 specific multiplexing registers */ -#define FUNC_MUX_CTRL_E 0xfffe1090 -#define FUNC_MUX_CTRL_F 0xfffe1094 -#define FUNC_MUX_CTRL_10 0xfffe1098 -#define FUNC_MUX_CTRL_11 0xfffe109c -#define FUNC_MUX_CTRL_12 0xfffe10a0 -#define PU_PD_SEL_0 0xfffe10b4 -#define PU_PD_SEL_1 0xfffe10b8 -#define PU_PD_SEL_2 0xfffe10bc -#define PU_PD_SEL_3 0xfffe10c0 -#define PU_PD_SEL_4 0xfffe10c4 - -/* Timer32K for 1610 and 1710*/ -#define OMAP_TIMER32K_BASE 0xFFFBC400 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 -#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) -#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 -#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) - -/* - * ---------------------------------------------------------------------------- - * MPUI interface - * ---------------------------------------------------------------------------- - */ -#define MPUI_BASE (0xfffec900) -#define MPUI_CTRL (MPUI_BASE + 0x0) -#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) -#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) -#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) -#define MPUI_STATUS_REG (MPUI_BASE + 0x10) -#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) -#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) -#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) - -/* - * ---------------------------------------------------------------------------- - * LED Pulse Generator - * ---------------------------------------------------------------------------- - */ -#define OMAP_LPG1_BASE 0xfffbd000 -#define OMAP_LPG2_BASE 0xfffbd800 -#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) -#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) -#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) -#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) - -/* - * ---------------------------------------------------------------------------- - * Pulse-Width Light - * ---------------------------------------------------------------------------- - */ -#define OMAP_PWL_BASE 0xfffb5800 -#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) -#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) - -/* - * --------------------------------------------------------------------------- - * Processor specific defines - * --------------------------------------------------------------------------- - */ - -#include "omap730.h" -#include "omap1510.h" -#include "omap24xx.h" -#include "omap16xx.h" -#include "omap34xx.h" - -#ifndef __ASSEMBLER__ - -/* - * --------------------------------------------------------------------------- - * Board specific defines - * --------------------------------------------------------------------------- - */ - -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#include "board-innovator.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H2 -#include "board-h2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#include "board-perseus2.h" -#endif - -#ifdef CONFIG_MACH_OMAP_FSAMPLE -#include "board-fsample.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H3 -#include "board-h3.h" -#endif - -#ifdef CONFIG_MACH_OMAP_H4 -#include "board-h4.h" -#endif - -#ifdef CONFIG_MACH_OMAP_2430SDP -#include "board-2430sdp.h" -#endif - -#ifdef CONFIG_MACH_OMAP_APOLLON -#include "board-apollon.h" -#endif - -#ifdef CONFIG_MACH_OMAP_OSK -#include "board-osk.h" -#endif - -#ifdef CONFIG_MACH_VOICEBLUE -#include "board-voiceblue.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTE -#include "board-palmte.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMZ71 -#include "board-palmz71.h" -#endif - -#ifdef CONFIG_MACH_OMAP_PALMTT -#include "board-palmtt.h" -#endif - -#ifdef CONFIG_MACH_SX1 -#include "board-sx1.h" -#endif - -#endif /* !__ASSEMBLER__ */ - -#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/include/asm-arm/arch-omap/hwa742.h b/include/asm-arm/arch-omap/hwa742.h deleted file mode 100644 index 577f492f2d3c..000000000000 --- a/include/asm-arm/arch-omap/hwa742.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected:1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h deleted file mode 100644 index 449e3568baa6..000000000000 --- a/include/asm-arm/arch-omap/io.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from linux/include/asm-arm/arch-sa1100/io.h - * Copyright (C) 1997-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ - -#define PCIO_BASE 0 - -#if defined(CONFIG_ARCH_OMAP1) - -#define IO_PHYS 0xFFFB0000 -#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define IO_SIZE 0x40000 -#define IO_VIRT (IO_PHYS - IO_OFFSET) -#define IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET) -#define io_p2v(pa) ((pa) - IO_OFFSET) -#define io_v2p(va) ((va) + IO_OFFSET) - -#elif defined(CONFIG_ARCH_OMAP2) - -/* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */ -#define L3_24XX_VIRT 0xf8000000 -#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */ -#define L4_24XX_VIRT 0xd8000000 -#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ - -#ifdef CONFIG_ARCH_OMAP2430 -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ -#define L4_WK_243X_VIRT 0xd9000000 -#define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ -#define OMAP243X_GPMC_VIRT 0xFE000000 -#define OMAP243X_GPMC_SIZE SZ_1M -#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE -#define OMAP243X_SDRC_VIRT 0xFD000000 -#define OMAP243X_SDRC_SIZE SZ_1M -#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE -#define OMAP243X_SMS_VIRT 0xFC000000 -#define OMAP243X_SMS_SIZE SZ_1M - -#endif - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ - -/* DSP */ -#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_24XX_VIRT 0xe0000000 -#define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_24XX_VIRT 0xe1000000 -#define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_24XX_VIRT 0xe2000000 -#define DSP_MMU_24XX_SIZE SZ_4K - -#elif defined(CONFIG_ARCH_OMAP3) - -/* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ -#define L3_34XX_VIRT 0xf8000000 -#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ - -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ -#define L4_34XX_VIRT 0xd8000000 -#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ - -/* - * Need to look at the Size 4M for L4. - * VPOM3430 was not working for Int controller - */ - -#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ -#define L4_WK_34XX_VIRT 0xd8300000 -#define L4_WK_34XX_SIZE SZ_1M - -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ -#define L4_PER_34XX_VIRT 0xd9000000 -#define L4_PER_34XX_SIZE SZ_1M - -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ -#define L4_EMU_34XX_VIRT 0xe4000000 -#define L4_EMU_34XX_SIZE SZ_64M - -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ -#define OMAP34XX_GPMC_VIRT 0xFE000000 -#define OMAP34XX_GPMC_SIZE SZ_1M - -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ -#define OMAP343X_SMS_VIRT 0xFC000000 -#define OMAP343X_SMS_SIZE SZ_1M - -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ -#define OMAP343X_SDRC_VIRT 0xFD000000 -#define OMAP343X_SDRC_SIZE SZ_1M - - -#define IO_OFFSET 0x90000000 -#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ -#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ - -/* DSP */ -#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ -#define DSP_MEM_34XX_VIRT 0xe0000000 -#define DSP_MEM_34XX_SIZE 0x28000 -#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ -#define DSP_IPI_34XX_VIRT 0xe1000000 -#define DSP_IPI_34XX_SIZE SZ_4K -#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ -#define DSP_MMU_34XX_VIRT 0xe2000000 -#define DSP_MMU_34XX_SIZE SZ_4K - -#endif - -#ifndef __ASSEMBLER__ - -/* - * Functions to access the OMAP IO region - * - * NOTE: - Use omap_read/write[bwl] for physical register addresses - * - Use __raw_read/write[bwl]() for virtual register addresses - * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses - * - DO NOT use hardcoded virtual addresses to allow changing the - * IO address space again if needed - */ -#define omap_readb(a) (*(volatile unsigned char *)IO_ADDRESS(a)) -#define omap_readw(a) (*(volatile unsigned short *)IO_ADDRESS(a)) -#define omap_readl(a) (*(volatile unsigned int *)IO_ADDRESS(a)) - -#define omap_writeb(v,a) (*(volatile unsigned char *)IO_ADDRESS(a) = (v)) -#define omap_writew(v,a) (*(volatile unsigned short *)IO_ADDRESS(a) = (v)) -#define omap_writel(v,a) (*(volatile unsigned int *)IO_ADDRESS(a) = (v)) - -extern void omap1_map_common_io(void); -extern void omap1_init_common_hw(void); - -extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(void); - -#endif - -#endif diff --git a/include/asm-arm/arch-omap/irda.h b/include/asm-arm/arch-omap/irda.h deleted file mode 100644 index 96bb12fab438..000000000000 --- a/include/asm-arm/arch-omap/irda.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/irda.h - * - * Copyright (C) 2005-2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_SEL 1 /* Selects IrDA */ -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 -#define IR_MIRMODE 8 - -struct omap_irda_config { - int transceiver_cap; - int (*transceiver_mode)(struct device *dev, int mode); - int (*select_irda)(struct device *dev, int state); - /* Very specific to the needs of some platforms (h3,h4) - * having calls which can sleep in irda_set_speed. - */ - struct delayed_work gpio_expa; - int rx_channel; - int tx_channel; - unsigned long dest_start; - unsigned long src_start; - int tx_trigger; - int rx_trigger; - int mode; -}; - -#endif diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h deleted file mode 100644 index afbf1e846468..000000000000 --- a/include/asm-arm/arch-omap/irqs.h +++ /dev/null @@ -1,332 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/irqs.h - * - * Copyright (C) Greg Lonnon 2001 - * Updated for OMAP-1610 by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 - * are different. - */ - -#ifndef __ASM_ARCH_OMAP15XX_IRQS_H -#define __ASM_ARCH_OMAP15XX_IRQS_H - -/* - * IRQ numbers for interrupt handler 1 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - * - */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_DMA_LCD 25 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 1 - */ -#define INT_1610_IH2_IRQ 0 -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 - -/* - * OMAP-730 specific IRQ numbers for interrupt handler 1 - */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 - -/* - * IRQ numbers for interrupt handler 2 - * - * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below - */ -#define IH2_BASE 32 - -#define INT_KEYBOARD (1 + IH2_BASE) -#define INT_uWireTX (2 + IH2_BASE) -#define INT_uWireRX (3 + IH2_BASE) -#define INT_I2C (4 + IH2_BASE) -#define INT_MPUIO (5 + IH2_BASE) -#define INT_USB_HHC_1 (6 + IH2_BASE) -#define INT_McBSP3TX (10 + IH2_BASE) -#define INT_McBSP3RX (11 + IH2_BASE) -#define INT_McBSP1TX (12 + IH2_BASE) -#define INT_McBSP1RX (13 + IH2_BASE) -#define INT_UART1 (14 + IH2_BASE) -#define INT_UART2 (15 + IH2_BASE) -#define INT_BT_MCSI1TX (16 + IH2_BASE) -#define INT_BT_MCSI1RX (17 + IH2_BASE) -#define INT_USB_W2FC (20 + IH2_BASE) -#define INT_1WIRE (21 + IH2_BASE) -#define INT_OS_TIMER (22 + IH2_BASE) -#define INT_MMC (23 + IH2_BASE) -#define INT_GAUGE_32K (24 + IH2_BASE) -#define INT_RTC_TIMER (25 + IH2_BASE) -#define INT_RTC_ALARM (26 + IH2_BASE) -#define INT_MEM_STICK (27 + IH2_BASE) - -/* - * OMAP-1510 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1510_DSP_MMU (28 + IH2_BASE) -#define INT_1510_COM_SPI_RO (31 + IH2_BASE) - -/* - * OMAP-1610 specific IRQ numbers for interrupt handler 2 - */ -#define INT_1610_FAC (0 + IH2_BASE) -#define INT_1610_USB_HHC_2 (7 + IH2_BASE) -#define INT_1610_USB_OTG (8 + IH2_BASE) -#define INT_1610_SoSSI (9 + IH2_BASE) -#define INT_1610_SoSSI_MATCH (19 + IH2_BASE) -#define INT_1610_DSP_MMU (28 + IH2_BASE) -#define INT_1610_McBSP2RX_OF (31 + IH2_BASE) -#define INT_1610_STI (32 + IH2_BASE) -#define INT_1610_STI_WAKEUP (33 + IH2_BASE) -#define INT_1610_GPTIMER3 (34 + IH2_BASE) -#define INT_1610_GPTIMER4 (35 + IH2_BASE) -#define INT_1610_GPTIMER5 (36 + IH2_BASE) -#define INT_1610_GPTIMER6 (37 + IH2_BASE) -#define INT_1610_GPTIMER7 (38 + IH2_BASE) -#define INT_1610_GPTIMER8 (39 + IH2_BASE) -#define INT_1610_GPIO_BANK2 (40 + IH2_BASE) -#define INT_1610_GPIO_BANK3 (41 + IH2_BASE) -#define INT_1610_MMC2 (42 + IH2_BASE) -#define INT_1610_CF (43 + IH2_BASE) -#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_1610_GPIO_BANK4 (48 + IH2_BASE) -#define INT_1610_SPI (49 + IH2_BASE) -#define INT_1610_DMA_CH6 (53 + IH2_BASE) -#define INT_1610_DMA_CH7 (54 + IH2_BASE) -#define INT_1610_DMA_CH8 (55 + IH2_BASE) -#define INT_1610_DMA_CH9 (56 + IH2_BASE) -#define INT_1610_DMA_CH10 (57 + IH2_BASE) -#define INT_1610_DMA_CH11 (58 + IH2_BASE) -#define INT_1610_DMA_CH12 (59 + IH2_BASE) -#define INT_1610_DMA_CH13 (60 + IH2_BASE) -#define INT_1610_DMA_CH14 (61 + IH2_BASE) -#define INT_1610_DMA_CH15 (62 + IH2_BASE) -#define INT_1610_NAND (63 + IH2_BASE) - -/* - * OMAP-730 specific IRQ numbers for interrupt handler 2 - */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) - -#define INT_24XX_SYS_NIRQ 7 -#define INT_24XX_SDMA_IRQ0 12 -#define INT_24XX_SDMA_IRQ1 13 -#define INT_24XX_SDMA_IRQ2 14 -#define INT_24XX_SDMA_IRQ3 15 -#define INT_24XX_CAM_IRQ 24 -#define INT_24XX_DSS_IRQ 25 -#define INT_24XX_MAIL_U0_MPU 26 -#define INT_24XX_DSP_UMA 27 -#define INT_24XX_DSP_MMU 28 -#define INT_24XX_GPIO_BANK1 29 -#define INT_24XX_GPIO_BANK2 30 -#define INT_24XX_GPIO_BANK3 31 -#define INT_24XX_GPIO_BANK4 32 -#define INT_24XX_GPIO_BANK5 33 -#define INT_24XX_MAIL_U3_MPU 34 -#define INT_24XX_GPTIMER1 37 -#define INT_24XX_GPTIMER2 38 -#define INT_24XX_GPTIMER3 39 -#define INT_24XX_GPTIMER4 40 -#define INT_24XX_GPTIMER5 41 -#define INT_24XX_GPTIMER6 42 -#define INT_24XX_GPTIMER7 43 -#define INT_24XX_GPTIMER8 44 -#define INT_24XX_GPTIMER9 45 -#define INT_24XX_GPTIMER10 46 -#define INT_24XX_GPTIMER11 47 -#define INT_24XX_GPTIMER12 48 -#define INT_24XX_I2C1_IRQ 56 -#define INT_24XX_I2C2_IRQ 57 -#define INT_24XX_MCBSP1_IRQ_TX 59 -#define INT_24XX_MCBSP1_IRQ_RX 60 -#define INT_24XX_MCBSP2_IRQ_TX 62 -#define INT_24XX_MCBSP2_IRQ_RX 63 -#define INT_24XX_UART1_IRQ 72 -#define INT_24XX_UART2_IRQ 73 -#define INT_24XX_UART3_IRQ 74 -#define INT_24XX_USB_IRQ_GEN 75 -#define INT_24XX_USB_IRQ_NISO 76 -#define INT_24XX_USB_IRQ_ISO 77 -#define INT_24XX_USB_IRQ_HGEN 78 -#define INT_24XX_USB_IRQ_HSOF 79 -#define INT_24XX_USB_IRQ_OTG 80 -#define INT_24XX_MMC_IRQ 83 - -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and - * 16 MPUIO lines */ -#define OMAP_MAX_GPIO_LINES 192 -#define IH_GPIO_BASE (128 + IH2_BASE) -#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) -#define OMAP_IRQ_END (IH_MPUIO_BASE + 16) - -/* External FPGA handles interrupts on Innovator boards */ -#define OMAP_FPGA_IRQ_BASE (OMAP_IRQ_END) -#ifdef CONFIG_MACH_OMAP_INNOVATOR -#define OMAP_FPGA_NR_IRQS 24 -#else -#define OMAP_FPGA_NR_IRQS 0 -#endif -#define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) - -/* External TWL4030 can handle interrupts on 2430 and 34xx boards */ -#define TWL4030_IRQ_BASE (OMAP_FPGA_IRQ_END) -#ifdef CONFIG_TWL4030_CORE -#define TWL4030_BASE_NR_IRQS 8 -#define TWL4030_PWR_NR_IRQS 8 -#else -#define TWL4030_BASE_NR_IRQS 0 -#define TWL4030_PWR_NR_IRQS 0 -#endif -#define TWL4030_IRQ_END (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS) -#define TWL4030_PWR_IRQ_BASE TWL4030_IRQ_END -#define TWL4030_PWR_IRQ_END (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS) - -/* External TWL4030 gpio interrupts are optional */ -#define TWL4030_GPIO_IRQ_BASE TWL4030_PWR_IRQ_END -#ifdef CONFIG_TWL4030_GPIO -#define TWL4030_GPIO_NR_IRQS 18 -#else -#define TWL4030_GPIO_NR_IRQS 0 -#endif -#define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) - -/* Total number of interrupts depends on the enabled blocks above */ -#define NR_IRQS TWL4030_GPIO_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#ifndef __ASSEMBLY__ -extern void omap_init_irq(void); -#endif - -#include - -#endif diff --git a/include/asm-arm/arch-omap/keypad.h b/include/asm-arm/arch-omap/keypad.h deleted file mode 100644 index b7f83075436e..000000000000 --- a/include/asm-arm/arch-omap/keypad.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/keypad.h - * - * Copyright (C) 2006 Komal Shah - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_KEYPAD_H -#define ASMARM_ARCH_KEYPAD_H - -struct omap_kp_platform_data { - int rows; - int cols; - int *keymap; - unsigned int keymapsize; - unsigned int rep:1; - unsigned long delay; - unsigned int dbounce:1; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; -}; - -/* Group (0..3) -- when multiple keys are pressed, only the - * keys pressed in the same group are considered as pressed. This is - * in order to workaround certain crappy HW designs that produce ghost - * keypresses. */ -#define GROUP_0 (0 << 16) -#define GROUP_1 (1 << 16) -#define GROUP_2 (2 << 16) -#define GROUP_3 (3 << 16) -#define GROUP_MASK GROUP_3 - -#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) - -#endif - diff --git a/include/asm-arm/arch-omap/lcd_mipid.h b/include/asm-arm/arch-omap/lcd_mipid.h deleted file mode 100644 index f8fbc4801e52..000000000000 --- a/include/asm-arm/arch-omap/lcd_mipid.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __LCD_MIPID_H -#define __LCD_MIPID_H - -enum mipid_test_num { - MIPID_TEST_RGB_LINES, -}; - -enum mipid_test_result { - MIPID_TEST_SUCCESS, - MIPID_TEST_INVALID, - MIPID_TEST_FAILED, -}; - -#ifdef __KERNEL__ - -struct mipid_platform_data { - int nreset_gpio; - int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); -}; - -#endif - -#endif diff --git a/include/asm-arm/arch-omap/led.h b/include/asm-arm/arch-omap/led.h deleted file mode 100644 index f3acae28e2da..000000000000 --- a/include/asm-arm/arch-omap/led.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/led.h - * - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/include/asm-arm/arch-omap/mailbox.h b/include/asm-arm/arch-omap/mailbox.h deleted file mode 100644 index 7cbed9332e16..000000000000 --- a/include/asm-arm/arch-omap/mailbox.h +++ /dev/null @@ -1,73 +0,0 @@ -/* mailbox.h */ - -#ifndef MAILBOX_H -#define MAILBOX_H - -#include -#include -#include - -typedef u32 mbox_msg_t; -typedef void (mbox_receiver_t)(mbox_msg_t msg); -struct omap_mbox; - -typedef int __bitwise omap_mbox_irq_t; -#define IRQ_TX ((__force omap_mbox_irq_t) 1) -#define IRQ_RX ((__force omap_mbox_irq_t) 2) - -typedef int __bitwise omap_mbox_type_t; -#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1) -#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2) - -struct omap_mbox_ops { - omap_mbox_type_t type; - int (*startup)(struct omap_mbox *mbox); - void (*shutdown)(struct omap_mbox *mbox); - /* fifo */ - mbox_msg_t (*fifo_read)(struct omap_mbox *mbox); - void (*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg); - int (*fifo_empty)(struct omap_mbox *mbox); - int (*fifo_full)(struct omap_mbox *mbox); - /* irq */ - void (*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - void (*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); - int (*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq); -}; - -struct omap_mbox_queue { - spinlock_t lock; - struct request_queue *queue; - struct work_struct work; - int (*callback)(void *); - struct omap_mbox *mbox; -}; - -struct omap_mbox { - char *name; - unsigned int irq; - - struct omap_mbox_queue *txq, *rxq; - - struct omap_mbox_ops *ops; - - mbox_msg_t seq_snd, seq_rcv; - - struct device dev; - - struct omap_mbox *next; - void *priv; - - void (*err_notify)(void); -}; - -int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *); -void omap_mbox_init_seq(struct omap_mbox *); - -struct omap_mbox *omap_mbox_get(const char *); -void omap_mbox_put(struct omap_mbox *); - -int omap_mbox_register(struct omap_mbox *); -int omap_mbox_unregister(struct omap_mbox *); - -#endif /* MAILBOX_H */ diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h deleted file mode 100644 index 3da459a282b9..000000000000 --- a/include/asm-arm/arch-omap/mcbsp.h +++ /dev/null @@ -1,380 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/mcbsp.h - * - * Defines for Multi-Channel Buffered Serial Port - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __ASM_ARCH_OMAP_MCBSP_H -#define __ASM_ARCH_OMAP_MCBSP_H - -#include -#include - -#include -#include - -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#define OMAP24XX_MCBSP1_BASE 0x48074000 -#define OMAP24XX_MCBSP2_BASE 0x48076000 - -#define OMAP34XX_MCBSP1_BASE 0x48074000 -#define OMAP34XX_MCBSP2_BASE 0x49022000 - -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -#define OMAP_MAX_MCBSP_COUNT 3 -#define MAX_MCBSP_CLOCKS 3 - -#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP1 -#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX -#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX - -#elif defined(CONFIG_ARCH_OMAP24XX) - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 - -#define OMAP_MAX_MCBSP_COUNT 2 -#define MAX_MCBSP_CLOCKS 2 - -#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1) -#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1) - -#define AUDIO_MCBSP OMAP_MCBSP2 -#define AUDIO_DMA_TX OMAP24XX_DMA_MCBSP2_TX -#define AUDIO_DMA_RX OMAP24XX_DMA_MCBSP2_RX - -#endif - -#define OMAP_MCBSP_READ(base, reg) __raw_readw((base) + OMAP_MCBSP_REG_##reg) -#define OMAP_MCBSP_WRITE(base, reg, val) __raw_writew((val), (base) + OMAP_MCBSP_REG_##reg) - - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; -}; - -typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, -} omap_mcbsp_id; - -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - -/* Platform specific configuration */ -struct omap_mcbsp_ops { - void (*request)(unsigned int); - void (*free)(unsigned int); - int (*check)(unsigned int); -}; - -struct omap_mcbsp_platform_data { - u32 virt_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; - struct omap_mcbsp_ops *ops; - char const *clk_name; -}; - -struct omap_mcbsp { - struct device *dev; - u32 io_base; - u8 id; - u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; - - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - short dma_rx_lch; - u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *clk; -}; - -int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, - int size); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id); -void omap_mcbsp_stop(unsigned int id); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - - -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); - -#endif diff --git a/include/asm-arm/arch-omap/mcspi.h b/include/asm-arm/arch-omap/mcspi.h deleted file mode 100644 index 1254e4945b6f..000000000000 --- a/include/asm-arm/arch-omap/mcspi.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _OMAP2_MCSPI_H -#define _OMAP2_MCSPI_H - -struct omap2_mcspi_platform_config { - unsigned short num_cs; -}; - -struct omap2_mcspi_device_config { - unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; -}; - -#endif diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h deleted file mode 100644 index 14cba97c18ad..000000000000 --- a/include/asm-arm/arch-omap/memory.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/memory.h - * - * Memory map for OMAP-1510 and 1610 - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This file was derived from linux/include/asm-arm/arch-intergrator/memory.h - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#if defined(CONFIG_ARCH_OMAP1) -#define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) -#define PHYS_OFFSET UL(0x80000000) -#endif - -/* - * Conversion between SDRAM and fake PCI bus, used by USB - * NOTE: Physical address must be converted to Local Bus address - * on OMAP-1510 only - */ - -/* - * Bus address is physical address, except for OMAP-1510 Local Bus. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * OMAP-1510 bus address is translated into a Local Bus address if the - * OMAP bus type is lbus. We do the address translation based on the - * device overriding the defaults used in the dma-mapping API. - * Note that the is_lbus_device() test is not very efficient on 1510 - * because of the strncmp(). - */ -#ifdef CONFIG_ARCH_OMAP15XX - -/* - * OMAP-1510 Local Bus address offset - */ -#define OMAP1510_LB_OFFSET UL(0x30000000) - -#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET) -#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET) -#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0)) - -#define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ - (dma_addr_t)virt_to_lbus(page_address(page)) : \ - (dma_addr_t)__virt_to_bus(page_address(page));}) - -#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __bus_to_virt(addr);}) - -#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \ - virt_to_lbus(addr) : \ - __virt_to_bus(addr);}) - -#endif /* CONFIG_ARCH_OMAP15XX */ - -/* Override the ARM default */ -#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE - -#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0) -#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE -#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2 -#endif - -#define CONSISTENT_DMA_SIZE \ - (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024) - -#endif - -#endif - diff --git a/include/asm-arm/arch-omap/menelaus.h b/include/asm-arm/arch-omap/menelaus.h deleted file mode 100644 index 69ed7ee40179..000000000000 --- a/include/asm-arm/arch-omap/menelaus.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/menelaus.h - * - * Functions to access Menelaus power management chip - */ - -#ifndef __ASM_ARCH_MENELAUS_H -#define __ASM_ARCH_MENELAUS_H - -struct device; - -struct menelaus_platform_data { - int (* late_init)(struct device *dev); -}; - -extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), - void *data); -extern void menelaus_unregister_mmc_callback(void); -extern int menelaus_set_mmc_opendrain(int slot, int enable); -extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); - -extern int menelaus_set_vmem(unsigned int mV); -extern int menelaus_set_vio(unsigned int mV); -extern int menelaus_set_vmmc(unsigned int mV); -extern int menelaus_set_vaux(unsigned int mV); -extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); -extern int menelaus_set_slot_sel(int enable); -extern int menelaus_get_slot_pin_states(void); -extern int menelaus_set_vcore_sw(unsigned int mV); -extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); - -#define EN_VPLL_SLEEP (1 << 7) -#define EN_VMMC_SLEEP (1 << 6) -#define EN_VAUX_SLEEP (1 << 5) -#define EN_VIO_SLEEP (1 << 4) -#define EN_VMEM_SLEEP (1 << 3) -#define EN_DC3_SLEEP (1 << 2) -#define EN_DC2_SLEEP (1 << 1) -#define EN_VC_SLEEP (1 << 0) - -extern int menelaus_set_regulator_sleep(int enable, u32 val); - -#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS) -#define omap_has_menelaus() 1 -#else -#define omap_has_menelaus() 0 -#endif - -#endif diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h deleted file mode 100644 index 7cfc5f258560..000000000000 --- a/include/asm-arm/arch-omap/mmc.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include -#include -#include - -#include - -#define OMAP_MMC_MAX_SLOTS 2 - -struct omap_mmc_platform_data { - struct omap_mmc_conf conf; - - /* number of slots on board */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (* switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (* init)(struct device *dev); - void (* cleanup)(struct device *dev); - void (* shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - struct omap_mmc_slot_data { - int (* set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (* set_power)(struct device *dev, int slot, int power_on, int vdd); - int (* get_ro)(struct device *dev, int slot); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - open - * 1 - closed - */ - int (* get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (* card_detect)(int irq); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info); - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); - -#endif diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h deleted file mode 100644 index f4714b5270d0..000000000000 --- a/include/asm-arm/arch-omap/mtd-xip.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions. - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Vladimir Barinov - * - * (c) 2005 MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express or - * implied. - */ - -#ifndef __ARCH_OMAP_MTD_XIP_H__ -#define __ARCH_OMAP_MTD_XIP_H__ - -#include -#define OMAP_MPU_TIMER_BASE (0xfffec500) -#define OMAP_MPU_TIMER_OFFSET 0x100 - -typedef struct { - u32 cntl; /* CNTL_TIMER, R/W */ - u32 load_tim; /* LOAD_TIM, W */ - u32 read_tim; /* READ_TIM, R */ -} xip_omap_mpu_timer_regs_t; - -#define xip_omap_mpu_timer_base(n) \ -((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \ - (n)*OMAP_MPU_TIMER_OFFSET)) - -static inline unsigned long xip_omap_mpu_timer_read(int nr) -{ - volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr); - return timer->read_tim; -} - -#define xip_irqpending() \ - (omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR)) -#define xip_currtime() (~xip_omap_mpu_timer_read(0)) - -/* - * It's permitted to do approxmation for xip_elapsed_since macro - * (see linux/mtd/xip.h) - */ - -#ifdef CONFIG_MACH_OMAP_PERSEUS2 -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7) -#else -#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6) -#endif - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1)) - -#endif /* __ARCH_OMAP_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h deleted file mode 100644 index ff9a5b5575fd..000000000000 --- a/include/asm-arm/arch-omap/mux.h +++ /dev/null @@ -1,615 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/mux.h - * - * Table of the Omap register configurations for the FUNC_MUX and - * PULL_DWN combinations. - * - * Copyright (C) 2004 - 2008 Texas Instruments Inc. - * Copyright (C) 2003 - 2008 Nokia Corporation - * - * Written by Tony Lindgren - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * NOTE: Please use the following naming style for new pin entries. - * For example, W8_1610_MMC2_DAT0, where: - * - W8 = ball - * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 - * - MMC2_DAT0 = function - */ - -#ifndef __ASM_ARCH_MUX_H -#define __ASM_ARCH_MUX_H - -#define PU_PD_SEL_NA 0 /* No pu_pd reg available */ -#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */ - -#ifdef CONFIG_OMAP_MUX_DEBUG -#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \ - .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \ - .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \ - .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#else - -#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ - .pu_pd_val = status, - -#define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#endif /* CONFIG_OMAP_MUX_DEBUG */ - -#define MUX_CFG(desc, mux_reg, mode_offset, mode, \ - pull_reg, pull_bit, pull_status, \ - pu_pd_reg, pu_pd_status, debug_status) \ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG(mux_reg, mode_offset, mode) \ - PULL_REG(pull_reg, pull_bit, pull_status) \ - PU_PD_REG(pu_pd_reg, pu_pd_status) \ -}, - - -/* - * OMAP730 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and - * not the FUNC_MUX_CTRL_x regs from hardware.h - * - for pull-up/down, only has one enable bit which is is in the same register - * as mux config - */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - -#define MUX_CFG_24XX(desc, reg_offset, mode, \ - pull_en, pull_mode, dbg) \ -{ \ - .name = desc, \ - .debug = dbg, \ - .mux_reg = reg_offset, \ - .mask = mode, \ - .pull_val = pull_en, \ - .pu_pd_val = pull_mode, \ -}, - - -#define PULL_DISABLED 0 -#define PULL_ENABLED 1 - -#define PULL_DOWN 0 -#define PULL_UP 1 - -struct pin_config { - char *name; - unsigned char busy; - unsigned char debug; - - const char *mux_reg_name; - const unsigned int mux_reg; - const unsigned char mask_offset; - const unsigned char mask; - - const char *pull_name; - const unsigned int pull_reg; - const unsigned char pull_val; - const unsigned char pull_bit; - - const char *pu_pd_name; - const unsigned int pu_pd_reg; - const unsigned char pu_pd_val; -}; - -enum omap730_index { - /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, - - /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, -}; - -enum omap1xxx_index { - /* UART1 (BT_UART_GATING)*/ - UART1_TX = 0, - UART1_RTS, - - /* UART2 (COM_UART_GATING)*/ - UART2_TX, - UART2_RX, - UART2_CTS, - UART2_RTS, - - /* UART3 (GIGA_UART_GATING) */ - UART3_TX, - UART3_RX, - UART3_CTS, - UART3_RTS, - UART3_CLKREQ, - UART3_BCLK, /* 12MHz clock out */ - Y15_1610_UART3_RTS, - - /* PWT & PWL */ - PWT, - PWL, - - /* USB master generic */ - R18_USB_VBUS, - R18_1510_USB_GPIO0, - W4_USB_PUEN, - W4_USB_CLKO, - W4_USB_HIGHZ, - W4_GPIO58, - - /* USB1 master */ - USB1_SUSP, - USB1_SEO, - W13_1610_USB1_SE0, - USB1_TXEN, - USB1_TXD, - USB1_VP, - USB1_VM, - USB1_RCV, - USB1_SPEED, - R13_1610_USB1_SPEED, - R13_1710_USB1_SE0, - - /* USB2 master */ - USB2_SUSP, - USB2_VP, - USB2_TXEN, - USB2_VM, - USB2_RCV, - USB2_SEO, - USB2_TXD, - - /* OMAP-1510 GPIO */ - R18_1510_GPIO0, - R19_1510_GPIO1, - M14_1510_GPIO2, - - /* OMAP1610 GPIO */ - P18_1610_GPIO3, - Y15_1610_GPIO17, - - /* OMAP-1710 GPIO */ - R18_1710_GPIO0, - V2_1710_GPIO10, - N21_1710_GPIO14, - W15_1710_GPIO40, - - /* MPUIO */ - MPUIO2, - N15_1610_MPUIO2, - MPUIO4, - MPUIO5, - T20_1610_MPUIO5, - W11_1610_MPUIO6, - V10_1610_MPUIO7, - W11_1610_MPUIO9, - V10_1610_MPUIO10, - W10_1610_MPUIO11, - E20_1610_MPUIO13, - U20_1610_MPUIO14, - E19_1610_MPUIO15, - - /* MCBSP2 */ - MCBSP2_CLKR, - MCBSP2_CLKX, - MCBSP2_DR, - MCBSP2_DX, - MCBSP2_FSR, - MCBSP2_FSX, - - /* MCBSP3 */ - MCBSP3_CLKX, - - /* Misc ballouts */ - BALLOUT_V8_ARMIO3, - N20_HDQ, - - /* OMAP-1610 MMC2 */ - W8_1610_MMC2_DAT0, - V8_1610_MMC2_DAT1, - W15_1610_MMC2_DAT2, - R10_1610_MMC2_DAT3, - Y10_1610_MMC2_CLK, - Y8_1610_MMC2_CMD, - V9_1610_MMC2_CMDDIR, - V5_1610_MMC2_DATDIR0, - W19_1610_MMC2_DATDIR1, - R18_1610_MMC2_CLKIN, - - /* OMAP-1610 External Trace Interface */ - M19_1610_ETM_PSTAT0, - L15_1610_ETM_PSTAT1, - L18_1610_ETM_PSTAT2, - L19_1610_ETM_D0, - J19_1610_ETM_D6, - J18_1610_ETM_D7, - - /* OMAP16XX GPIO */ - P20_1610_GPIO4, - V9_1610_GPIO7, - W8_1610_GPIO9, - N20_1610_GPIO11, - N19_1610_GPIO13, - P10_1610_GPIO22, - V5_1610_GPIO24, - AA20_1610_GPIO_41, - W19_1610_GPIO48, - M7_1610_GPIO62, - V14_16XX_GPIO37, - R9_16XX_GPIO18, - L14_16XX_GPIO49, - - /* OMAP-1610 uWire */ - V19_1610_UWIRE_SCLK, - U18_1610_UWIRE_SDI, - W21_1610_UWIRE_SDO, - N14_1610_UWIRE_CS0, - P15_1610_UWIRE_CS3, - N15_1610_UWIRE_CS1, - - /* OMAP-1610 SPI */ - U19_1610_SPIF_SCK, - U18_1610_SPIF_DIN, - P20_1610_SPIF_DIN, - W21_1610_SPIF_DOUT, - R18_1610_SPIF_DOUT, - N14_1610_SPIF_CS0, - N15_1610_SPIF_CS1, - T19_1610_SPIF_CS2, - P15_1610_SPIF_CS3, - - /* OMAP-1610 Flash */ - L3_1610_FLASH_CS2B_OE, - M8_1610_FLASH_CS2B_WE, - - /* First MMC */ - MMC_CMD, - MMC_DAT1, - MMC_DAT2, - MMC_DAT0, - MMC_CLK, - MMC_DAT3, - - /* OMAP-1710 MMC CMDDIR and DATDIR0 */ - M15_1710_MMC_CLKI, - P19_1710_MMC_CMDDIR, - P20_1710_MMC_DATDIR0, - - /* OMAP-1610 USB0 alternate pin configuration */ - W9_USB0_TXEN, - AA9_USB0_VP, - Y5_USB0_RCV, - R9_USB0_VM, - V6_USB0_TXD, - W5_USB0_SE0, - V9_USB0_SPEED, - V9_USB0_SUSP, - - /* USB2 */ - W9_USB2_TXEN, - AA9_USB2_VP, - Y5_USB2_RCV, - R9_USB2_VM, - V6_USB2_TXD, - W5_USB2_SE0, - - /* 16XX UART */ - R13_1610_UART1_TX, - V14_16XX_UART1_RX, - R14_1610_UART1_CTS, - AA15_1610_UART1_RTS, - R9_16XX_UART2_RX, - L14_16XX_UART3_RX, - - /* I2C OMAP-1610 */ - I2C_SCL, - I2C_SDA, - - /* Keypad */ - F18_1610_KBC0, - D20_1610_KBC1, - D19_1610_KBC2, - E18_1610_KBC3, - C21_1610_KBC4, - G18_1610_KBR0, - F19_1610_KBR1, - H14_1610_KBR2, - E20_1610_KBR3, - E19_1610_KBR4, - N19_1610_KBR5, - - /* Power management */ - T20_1610_LOW_PWR, - - /* MCLK Settings */ - V5_1710_MCLK_ON, - V5_1710_MCLK_OFF, - R10_1610_MCLK_ON, - R10_1610_MCLK_OFF, - - /* CompactFlash controller */ - P11_1610_CF_CD2, - R11_1610_CF_IOIS16, - V10_1610_CF_IREQ, - W10_1610_CF_RESET, - W11_1610_CF_CD1, - - /* parallel camera */ - J15_1610_CAM_LCLK, - J18_1610_CAM_D7, - J19_1610_CAM_D6, - J14_1610_CAM_D5, - K18_1610_CAM_D4, - K19_1610_CAM_D3, - K15_1610_CAM_D2, - K14_1610_CAM_D1, - L19_1610_CAM_D0, - L18_1610_CAM_VS, - L15_1610_CAM_HS, - M19_1610_CAM_RSTZ, - Y15_1610_CAM_OUTCLK, - - /* serial camera */ - H19_1610_CAM_EXCLK, - Y12_1610_CCP_CLKP, - W13_1610_CCP_CLKM, - W14_1610_CCP_DATAP, - Y14_1610_CCP_DATAM, - -}; - -enum omap24xx_index { - /* 24xx I2C */ - M19_24XX_I2C1_SCL, - L15_24XX_I2C1_SDA, - J15_24XX_I2C2_SCL, - H19_24XX_I2C2_SDA, - - /* 24xx Menelaus interrupt */ - W19_24XX_SYS_NIRQ, - - /* 24xx clock */ - W14_24XX_SYS_CLKOUT, - - /* 24xx GPMC chipselects, wait pin monitoring */ - E2_GPMC_NCS2, - L2_GPMC_NCS7, - L3_GPMC_WAIT0, - N7_GPMC_WAIT1, - M1_GPMC_WAIT2, - P1_GPMC_WAIT3, - - /* 242X McBSP */ - Y15_24XX_MCBSP2_CLKX, - R14_24XX_MCBSP2_FSX, - W15_24XX_MCBSP2_DR, - V15_24XX_MCBSP2_DX, - - /* 24xx GPIO */ - M21_242X_GPIO11, - P21_242X_GPIO12, - AA10_242X_GPIO13, - AA6_242X_GPIO14, - AA4_242X_GPIO15, - Y11_242X_GPIO16, - AA12_242X_GPIO17, - AA8_242X_GPIO58, - Y20_24XX_GPIO60, - W4__24XX_GPIO74, - N15_24XX_GPIO85, - M15_24XX_GPIO92, - P20_24XX_GPIO93, - P18_24XX_GPIO95, - M18_24XX_GPIO96, - L14_24XX_GPIO97, - J15_24XX_GPIO99, - V14_24XX_GPIO117, - P14_24XX_GPIO125, - - /* 242x DBG GPIO */ - V4_242X_GPIO49, - W2_242X_GPIO50, - U4_242X_GPIO51, - V3_242X_GPIO52, - V2_242X_GPIO53, - V6_242X_GPIO53, - T4_242X_GPIO54, - Y4_242X_GPIO54, - T3_242X_GPIO55, - U2_242X_GPIO56, - - /* 24xx external DMA requests */ - AA10_242X_DMAREQ0, - AA6_242X_DMAREQ1, - E4_242X_DMAREQ2, - G4_242X_DMAREQ3, - D3_242X_DMAREQ4, - E3_242X_DMAREQ5, - - /* UART3 */ - K15_24XX_UART3_TX, - K14_24XX_UART3_RX, - - /* MMC/SDIO */ - G19_24XX_MMC_CLKO, - H18_24XX_MMC_CMD, - F20_24XX_MMC_DAT0, - H14_24XX_MMC_DAT1, - E19_24XX_MMC_DAT2, - D19_24XX_MMC_DAT3, - F19_24XX_MMC_DAT_DIR0, - E20_24XX_MMC_DAT_DIR1, - F18_24XX_MMC_DAT_DIR2, - E18_24XX_MMC_DAT_DIR3, - G18_24XX_MMC_CMD_DIR, - H15_24XX_MMC_CLKI, - - /* Full speed USB */ - J20_24XX_USB0_PUEN, - J19_24XX_USB0_VP, - K20_24XX_USB0_VM, - J18_24XX_USB0_RCV, - K19_24XX_USB0_TXEN, - J14_24XX_USB0_SE0, - K18_24XX_USB0_DAT, - - N14_24XX_USB1_SE0, - W12_24XX_USB1_SE0, - P15_24XX_USB1_DAT, - R13_24XX_USB1_DAT, - W20_24XX_USB1_TXEN, - P13_24XX_USB1_TXEN, - V19_24XX_USB1_RCV, - V12_24XX_USB1_RCV, - - AA10_24XX_USB2_SE0, - Y11_24XX_USB2_DAT, - AA12_24XX_USB2_TXEN, - AA6_24XX_USB2_RCV, - AA4_24XX_USB2_TLLSE0, - - /* Keypad GPIO*/ - T19_24XX_KBR0, - R19_24XX_KBR1, - V18_24XX_KBR2, - M21_24XX_KBR3, - E5__24XX_KBR4, - M18_24XX_KBR5, - R20_24XX_KBC0, - M14_24XX_KBC1, - H19_24XX_KBC2, - V17_24XX_KBC3, - P21_24XX_KBC4, - L14_24XX_KBC5, - N19_24XX_KBC6, - - /* 24xx Menelaus Keypad GPIO */ - B3__24XX_KBR5, - AA4_24XX_KBC2, - B13_24XX_KBC6, - - /* 2430 USB */ - AD9_2430_USB0_PUEN, - Y11_2430_USB0_VP, - AD7_2430_USB0_VM, - AE7_2430_USB0_RCV, - AD4_2430_USB0_TXEN, - AF9_2430_USB0_SE0, - AE6_2430_USB0_DAT, - AD24_2430_USB1_SE0, - AB24_2430_USB1_RCV, - Y25_2430_USB1_TXEN, - AA26_2430_USB1_DAT, - - /* 2430 HS-USB */ - AD9_2430_USB0HS_DATA3, - Y11_2430_USB0HS_DATA4, - AD7_2430_USB0HS_DATA5, - AE7_2430_USB0HS_DATA6, - AD4_2430_USB0HS_DATA2, - AF9_2430_USB0HS_DATA0, - AE6_2430_USB0HS_DATA1, - AE8_2430_USB0HS_CLK, - AD8_2430_USB0HS_DIR, - AE5_2430_USB0HS_STP, - AE9_2430_USB0HS_NXT, - AC7_2430_USB0HS_DATA7, - - /* 2430 McBSP */ - AC10_2430_MCBSP2_FSX, - AD16_2430_MCBSP2_CLX, - AE13_2430_MCBSP2_DX, - AD13_2430_MCBSP2_DR, - AC10_2430_MCBSP2_FSX_OFF, - AD16_2430_MCBSP2_CLX_OFF, - AE13_2430_MCBSP2_DX_OFF, - AD13_2430_MCBSP2_DR_OFF, - -}; - -struct omap_mux_cfg { - struct pin_config *pins; - unsigned long size; - int (*cfg_reg)(const struct pin_config *cfg); -}; - -#ifdef CONFIG_OMAP_MUX -/* setup pin muxing in Linux */ -extern int omap1_mux_init(void); -extern int omap2_mux_init(void); -extern int omap_mux_register(struct omap_mux_cfg *); -extern int omap_cfg_reg(unsigned long reg_cfg); -#else -/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ -static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } -static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } -#endif - -#endif diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h deleted file mode 100644 index 17ae26e35353..000000000000 --- a/include/asm-arm/arch-omap/nand.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * include/asm-arm/arch-omap/nand.h - * - * Copyright (C) 2006 Micron Technology Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -struct omap_nand_platform_data { - unsigned int options; - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*nand_setup)(void __iomem *); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; -}; diff --git a/include/asm-arm/arch-omap/omap-alsa.h b/include/asm-arm/arch-omap/omap-alsa.h deleted file mode 100644 index faa0ed23d4ba..000000000000 --- a/include/asm-arm/arch-omap/omap-alsa.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/omap-alsa.h - * - * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. - * - * Copyright (C) 2006 Mika Laitio - * - * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil - * Written by Daniel Petrini, David Cohen, Anderson Briglia - * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History - * ------- - * - * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, - * original version based in sa1100 driver - * and omap oss driver. - */ - -#ifndef __OMAP_ALSA_H -#define __OMAP_ALSA_H - -#include -#include -#include -#include -#include - -#define DMA_BUF_SIZE (1024 * 8) - -/* - * Buffer management for alsa and dma - */ -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - int dma_dev; /* dma number of that device */ - int *lch; /* Chain of channels this stream is linked to */ - char started; /* to store if the chain was started or not */ - int dma_q_head; /* DMA Channel Q Head */ - int dma_q_tail; /* DMA Channel Q Tail */ - char dma_q_count; /* DMA Channel Q Count */ - int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - spinlock_t dma_lock; /* for locking in DMA operations */ - struct snd_pcm_substream *stream; /* the pcm stream */ - unsigned linked:1; /* dma channels linked */ - int offset; /* store start position of the last period in the alsa buffer */ - int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ - int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ -}; - -/* - * Alsa card structure for aic23 - */ -struct snd_card_omap_codec { - struct snd_card *card; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -/* Codec specific information and function pointers. - * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) - * are responsible for defining the function pointers. - */ -struct omap_alsa_codec_config { - char *name; - struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; - struct snd_pcm_hw_constraint_list *hw_constraints_rates; - struct snd_pcm_hardware *snd_omap_alsa_playback; - struct snd_pcm_hardware *snd_omap_alsa_capture; - void (*codec_configure_dev)(void); - void (*codec_set_samplerate)(long); - void (*codec_clock_setup)(void); - int (*codec_clock_on)(void); - int (*codec_clock_off)(void); - int (*get_default_samplerate)(void); -}; - -/*********** Mixer function prototypes *************************/ -int snd_omap_mixer(struct snd_card_omap_codec *); -void snd_omap_init_mixer(void); - -#ifdef CONFIG_PM -void snd_omap_suspend_mixer(void); -void snd_omap_resume_mixer(void); -#endif - -int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); -int snd_omap_alsa_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); -int snd_omap_alsa_resume(struct platform_device *pdev); -#else -#define snd_omap_alsa_suspend NULL -#define snd_omap_alsa_resume NULL -#endif - -void callback_omap_alsa_sound_dma(void *); - -#endif diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h deleted file mode 100644 index c575d354850f..000000000000 --- a/include/asm-arm/arch-omap/omap1510.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap1510.h - * - * Hardware definitions for TI OMAP1510 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP15XX_H -#define __ASM_ARCH_OMAP15XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP1510_DSP_BASE 0xE0000000 -#define OMAP1510_DSP_SIZE 0x28000 -#define OMAP1510_DSP_START 0xE0000000 - -#define OMAP1510_DSPREG_BASE 0xE1000000 -#define OMAP1510_DSPREG_SIZE SZ_128K -#define OMAP1510_DSPREG_START 0xE1000000 - -#endif /* __ASM_ARCH_OMAP15XX_H */ - diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h deleted file mode 100644 index f7f5cdfdccce..000000000000 --- a/include/asm-arm/arch-omap/omap16xx.h +++ /dev/null @@ -1,197 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap16xx.h - * - * Hardware definitions for TI OMAP1610/5912/1710 processors. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP16XX_H -#define __ASM_ARCH_OMAP16XX_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP16XX_DSP_BASE 0xE0000000 -#define OMAP16XX_DSP_SIZE 0x28000 -#define OMAP16XX_DSP_START 0xE0000000 - -#define OMAP16XX_DSPREG_BASE 0xE1000000 -#define OMAP16XX_DSPREG_SIZE SZ_128K -#define OMAP16XX_DSPREG_START 0xE1000000 - -/* - * --------------------------------------------------------------------------- - * Interrupts - * --------------------------------------------------------------------------- - */ -#define OMAP_IH2_0_BASE (0xfffe0000) -#define OMAP_IH2_1_BASE (0xfffe0100) -#define OMAP_IH2_2_BASE (0xfffe0200) -#define OMAP_IH2_3_BASE (0xfffe0300) - -#define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00) -#define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04) -#define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10) -#define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14) -#define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18) -#define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c) -#define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c) - -#define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00) -#define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04) -#define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10) -#define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14) -#define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18) -#define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c) -#define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c) - -#define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00) -#define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04) -#define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10) -#define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14) -#define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18) -#define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c) -#define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c) - -#define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00) -#define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04) -#define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10) -#define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14) -#define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18) -#define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c) -#define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c) - -/* - * ---------------------------------------------------------------------------- - * Clocks - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) - -/* - * ---------------------------------------------------------------------------- - * Pin configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10) -#define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11) -#define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13) - -/* - * ---------------------------------------------------------------------------- - * System control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP1610_RESET_CONTROL 0xfffe1140 - -/* - * --------------------------------------------------------------------------- - * TIPB bus interface - * --------------------------------------------------------------------------- - */ -#define TIPB_SWITCH_BASE (0xfffbc800) -#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160) - -/* UART3 Registers Maping through MPU bus */ -#define UART3_RHR (OMAP_UART3_BASE + 0) -#define UART3_THR (OMAP_UART3_BASE + 0) -#define UART3_DLL (OMAP_UART3_BASE + 0) -#define UART3_IER (OMAP_UART3_BASE + 4) -#define UART3_DLH (OMAP_UART3_BASE + 4) -#define UART3_IIR (OMAP_UART3_BASE + 8) -#define UART3_FCR (OMAP_UART3_BASE + 8) -#define UART3_EFR (OMAP_UART3_BASE + 8) -#define UART3_LCR (OMAP_UART3_BASE + 0x0C) -#define UART3_MCR (OMAP_UART3_BASE + 0x10) -#define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10) -#define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14) -#define UART3_LSR (OMAP_UART3_BASE + 0x14) -#define UART3_TCR (OMAP_UART3_BASE + 0x18) -#define UART3_MSR (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF1 (OMAP_UART3_BASE + 0x18) -#define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C) -#define UART3_SPR (OMAP_UART3_BASE + 0x1C) -#define UART3_TLR (OMAP_UART3_BASE + 0x1C) -#define UART3_MDR1 (OMAP_UART3_BASE + 0x20) -#define UART3_MDR2 (OMAP_UART3_BASE + 0x24) -#define UART3_SFLSR (OMAP_UART3_BASE + 0x28) -#define UART3_TXFLL (OMAP_UART3_BASE + 0x28) -#define UART3_RESUME (OMAP_UART3_BASE + 0x2C) -#define UART3_TXFLH (OMAP_UART3_BASE + 0x2C) -#define UART3_SFREGL (OMAP_UART3_BASE + 0x30) -#define UART3_RXFLL (OMAP_UART3_BASE + 0x30) -#define UART3_SFREGH (OMAP_UART3_BASE + 0x34) -#define UART3_RXFLH (OMAP_UART3_BASE + 0x34) -#define UART3_BLR (OMAP_UART3_BASE + 0x38) -#define UART3_ACREG (OMAP_UART3_BASE + 0x3C) -#define UART3_DIV16 (OMAP_UART3_BASE + 0x3C) -#define UART3_SCR (OMAP_UART3_BASE + 0x40) -#define UART3_SSR (OMAP_UART3_BASE + 0x44) -#define UART3_EBLR (OMAP_UART3_BASE + 0x48) -#define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C) -#define UART3_MVR (OMAP_UART3_BASE + 0x50) - -/* - * --------------------------------------------------------------------------- - * Watchdog timer - * --------------------------------------------------------------------------- - */ - -/* 32-bit Watchdog timer in OMAP 16XX */ -#define OMAP_16XX_WATCHDOG_BASE (0xfffeb000) -#define OMAP_16XX_WIDR (OMAP_16XX_WATCHDOG_BASE + 0x00) -#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10) -#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14) -#define OMAP_16XX_WCLR (OMAP_16XX_WATCHDOG_BASE + 0x24) -#define OMAP_16XX_WCRR (OMAP_16XX_WATCHDOG_BASE + 0x28) -#define OMAP_16XX_WLDR (OMAP_16XX_WATCHDOG_BASE + 0x2c) -#define OMAP_16XX_WTGR (OMAP_16XX_WATCHDOG_BASE + 0x30) -#define OMAP_16XX_WWPS (OMAP_16XX_WATCHDOG_BASE + 0x34) -#define OMAP_16XX_WSPR (OMAP_16XX_WATCHDOG_BASE + 0x48) - -#define WCLR_PRE_SHIFT 5 -#define WCLR_PTV_SHIFT 2 - -#define WWPS_W_PEND_WSPR (1 << 4) -#define WWPS_W_PEND_WTGR (1 << 3) -#define WWPS_W_PEND_WLDR (1 << 2) -#define WWPS_W_PEND_WCRR (1 << 1) -#define WWPS_W_PEND_WCLR (1 << 0) - -#define WSPR_ENABLE_0 (0x0000bbbb) -#define WSPR_ENABLE_1 (0x00004444) -#define WSPR_DISABLE_0 (0x0000aaaa) -#define WSPR_DISABLE_1 (0x00005555) - -/* Mailbox */ -#define OMAP16XX_MAILBOX_BASE (0xfffcf000) - -#endif /* __ASM_ARCH_OMAP16XX_H */ - diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h deleted file mode 100644 index b9fcaae287c8..000000000000 --- a/include/asm-arm/arch-omap/omap24xx.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-arm/arch-omap/omap24xx.h - * - * This file contains the processor specific definitions - * of the TI OMAP24XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_OMAP24XX_H -#define __ASM_ARCH_OMAP24XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. Note also that some of these defines are needed - * for omap1 to compile without adding ifdefs. - */ - -#define L4_24XX_BASE 0x48000000 -#define L4_WK_243X_BASE 0x49000000 -#define L3_24XX_BASE 0x68000000 - -/* interrupt controller */ -#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 - -#define OMAP2420_CTRL_BASE L4_24XX_BASE -#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP2420_PRM_BASE OMAP2420_CM_BASE -#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP2420_SMS_BASE 0x68008000 - -#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP2430_PRM_BASE OMAP2430_CM_BASE - -#define OMAP243X_SMS_BASE 0x6C000000 -#define OMAP243X_SDRC_BASE 0x6D000000 -#define OMAP243X_GPMC_BASE 0x6E000000 -#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) -#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE -#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) - -/* DSP SS */ -#define OMAP2420_DSP_BASE 0x58000000 -#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) -#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) -#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) - -#define OMAP243X_DSP_BASE 0x5C000000 -#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) -#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) - -/* Mailbox */ -#define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) - -/* Camera */ -#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) - -/* Security */ -#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) -#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) -#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) -#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) -#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) -#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) - -#if defined(CONFIG_ARCH_OMAP2420) - -#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE -#define OMAP2_CM_BASE OMAP2420_CM_BASE -#define OMAP2_PRM_BASE OMAP2420_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#elif defined(CONFIG_ARCH_OMAP2430) - -#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE -#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE -#define OMAP2_CM_BASE OMAP2430_CM_BASE -#define OMAP2_PRM_BASE OMAP2430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) - -#endif - -#endif /* __ASM_ARCH_OMAP24XX_H */ - diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h deleted file mode 100644 index aa30c6d10abd..000000000000 --- a/include/asm-arm/arch-omap/omap34xx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * include/asm-arm/arch-omap/omap34xx.h - * - * This file contains the processor specific definitions of the TI OMAP34XX. - * - * Copyright (C) 2007 Texas Instruments. - * Copyright (C) 2007 Nokia Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_OMAP34XX_H -#define __ASM_ARCH_OMAP34XX_H - -/* - * Please place only base defines here and put the rest in device - * specific headers. - */ - -#define L4_34XX_BASE 0x48000000 -#define L4_WK_34XX_BASE 0x48300000 -#define L4_WK_OMAP_BASE L4_WK_34XX_BASE -#define L4_PER_34XX_BASE 0x49000000 -#define L4_PER_OMAP_BASE L4_PER_34XX_BASE -#define L4_EMU_34XX_BASE 0x54000000 -#define L4_EMU_BASE L4_EMU_34XX_BASE -#define L3_34XX_BASE 0x68000000 -#define L3_OMAP_BASE L3_34XX_BASE - -#define OMAP3430_32KSYNCT_BASE 0x48320000 -#define OMAP3430_CM_BASE 0x48004800 -#define OMAP3430_PRM_BASE 0x48306800 -#define OMAP343X_SMS_BASE 0x6C000000 -#define OMAP343X_SDRC_BASE 0x6D000000 -#define OMAP34XX_GPMC_BASE 0x6E000000 -#define OMAP343X_SCM_BASE 0x48002000 -#define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE - -#define OMAP34XX_IC_BASE 0x48200000 -#define OMAP34XX_IVA_INTC_BASE 0x40000000 -#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) -#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) -#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) - - -#if defined(CONFIG_ARCH_OMAP3430) - -#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE -#define OMAP2_CM_BASE OMAP3430_CM_BASE -#define OMAP2_PRM_BASE OMAP3430_PRM_BASE -#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE) - -#endif - -#define OMAP34XX_DSP_BASE 0x58000000 -#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0) -#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000) -#define OMAP34XX_DSP_MMU_BASE (OMAP34XX_DSP_BASE + 0x2000000) -#endif /* __ASM_ARCH_OMAP34XX_H */ - diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h deleted file mode 100644 index 755b64c5e9f0..000000000000 --- a/include/asm-arm/arch-omap/omap730.h +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/include/asm-arm/arch-omap/omap730.h - * - * Hardware definitions for TI OMAP730 processor. - * - * Cleanup for Linux-2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP730_H -#define __ASM_ARCH_OMAP730_H - -/* - * ---------------------------------------------------------------------------- - * Base addresses - * ---------------------------------------------------------------------------- - */ - -/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ - -#define OMAP730_DSP_BASE 0xE0000000 -#define OMAP730_DSP_SIZE 0x50000 -#define OMAP730_DSP_START 0xE0000000 - -#define OMAP730_DSPREG_BASE 0xE1000000 -#define OMAP730_DSPREG_SIZE SZ_128K -#define OMAP730_DSPREG_START 0xE1000000 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 specific configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_CONFIG_BASE 0xfffe1000 -#define OMAP730_IO_CONF_0 0xfffe1070 -#define OMAP730_IO_CONF_1 0xfffe1074 -#define OMAP730_IO_CONF_2 0xfffe1078 -#define OMAP730_IO_CONF_3 0xfffe107c -#define OMAP730_IO_CONF_4 0xfffe1080 -#define OMAP730_IO_CONF_5 0xfffe1084 -#define OMAP730_IO_CONF_6 0xfffe1088 -#define OMAP730_IO_CONF_7 0xfffe108c -#define OMAP730_IO_CONF_8 0xfffe1090 -#define OMAP730_IO_CONF_9 0xfffe1094 -#define OMAP730_IO_CONF_10 0xfffe1098 -#define OMAP730_IO_CONF_11 0xfffe109c -#define OMAP730_IO_CONF_12 0xfffe10a0 -#define OMAP730_IO_CONF_13 0xfffe10a4 - -#define OMAP730_MODE_1 0xfffe1010 -#define OMAP730_MODE_2 0xfffe1014 - -/* CSMI specials: in terms of base + offset */ -#define OMAP730_MODE2_OFFSET 0x14 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 traffic controller configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_FLASH_CFG_0 0xfffecc10 -#define OMAP730_FLASH_ACFG_0 0xfffecc50 -#define OMAP730_FLASH_CFG_1 0xfffecc14 -#define OMAP730_FLASH_ACFG_1 0xfffecc54 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 DSP control registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_ICR_BASE 0xfffbb800 -#define OMAP730_DSP_M_CTL 0xfffbb804 -#define OMAP730_DSP_MMU_BASE 0xfffed200 - -/* - * ---------------------------------------------------------------------------- - * OMAP730 PCC_UPLD configuration registers - * ---------------------------------------------------------------------------- - */ -#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900) -#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00) - -#endif /* __ASM_ARCH_OMAP730_H */ - diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h deleted file mode 100644 index 46d7a4f60854..000000000000 --- a/include/asm-arm/arch-omap/omapfb.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * File: include/asm-arm/arch-omap/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include -#include - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -#include - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - dma_addr_t paddr; - void *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - struct lcd_ctrl *ctrl; /* LCD controller */ - struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h deleted file mode 100644 index 6c959d0ce470..000000000000 --- a/include/asm-arm/arch-omap/onenand.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-omap/onenand.h - * - * Copyright (C) 2006 Nokia Corporation - * Author: Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -struct omap_onenand_platform_data { - int cs; - int gpio_irq; - struct mtd_partition *parts; - int nr_parts; - int (*onenand_setup)(void __iomem *); - int dma_channel; -}; diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h deleted file mode 100644 index face9ad41e97..000000000000 --- a/include/asm-arm/arch-omap/param.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/param.h - * - */ - -#ifdef CONFIG_OMAP_32K_TIMER_HZ -#define HZ CONFIG_OMAP_32K_TIMER_HZ -#endif diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h deleted file mode 100644 index 14588059981f..000000000000 --- a/include/asm-arm/arch-omap/pm.h +++ /dev/null @@ -1,356 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/pm.h - * - * Header file for OMAP Power Management Routines - * - * Author: MontaVista Software, Inc. - * support@mvista.com - * - * Copyright 2002 MontaVista Software Inc. - * - * Cleanup 2004 for Linux 2.6 by Dirk Behme - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_OMAP_PM_H -#define __ASM_ARCH_OMAP_PM_H - -/* - * ---------------------------------------------------------------------------- - * Register and offset definitions to be used in PM assembler code - * ---------------------------------------------------------------------------- - */ -#define CLKGEN_REG_ASM_BASE io_p2v(0xfffece00) -#define ARM_IDLECT1_ASM_OFFSET 0x04 -#define ARM_IDLECT2_ASM_OFFSET 0x08 - -#define TCMIF_ASM_BASE io_p2v(0xfffecc00) -#define EMIFS_CONFIG_ASM_OFFSET 0x0c -#define EMIFF_SDRAM_CONFIG_ASM_OFFSET 0x20 - -/* - * ---------------------------------------------------------------------------- - * Power management bitmasks - * ---------------------------------------------------------------------------- - */ -#define IDLE_WAIT_CYCLES 0x00000fff -#define PERIPHERAL_ENABLE 0x2 - -#define SELF_REFRESH_MODE 0x0c000001 -#define IDLE_EMIFS_REQUEST 0xc -#define MODEM_32K_EN 0x1 -#define PER_EN 0x1 - -#define CPU_SUSPEND_SIZE 200 -#define ULPD_LOW_PWR_EN 0x0001 -#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010 -#define ULPD_SETUP_ANALOG_CELL_3_VAL 0 -#define ULPD_POWER_CTRL_REG_VAL 0x0219 - -#define DSP_IDLE_DELAY 10 -#define DSP_IDLE 0x0040 -#define DSP_RST 0x0004 -#define DSP_ENABLE 0x0002 -#define SUFFICIENT_DSP_RESET_TIME 1000 -#define DEFAULT_MPUI_CONFIG 0x05cf -#define ENABLE_XORCLK 0x2 -#define DSP_CLOCK_ENABLE 0x2000 -#define DSP_IDLE_MODE 0x2 -#define TC_IDLE_REQUEST (0x0000000c) - -#define IRQ_LEVEL2 (1<<0) -#define IRQ_KEYBOARD (1<<1) -#define IRQ_UART2 (1<<15) - -#define PDE_BIT 0x08 -#define PWD_EN_BIT 0x04 -#define EN_PERCK_BIT 0x04 - -#define OMAP1510_DEEP_SLEEP_REQUEST 0x0ec7 -#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5 -#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00 -#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2 - -/* Both big sleep and deep sleep use same values. Difference is in ULPD. */ -#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7 -#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP1610_IDLECT3_VAL 0x3f -#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c -#define OMAP1610_IDLECT3 0xfffece24 -#define OMAP1610_IDLE_LOOP_REQUEST 0x0400 - -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 - -#if !defined(CONFIG_ARCH_OMAP730) && \ - !defined(CONFIG_ARCH_OMAP15XX) && \ - !defined(CONFIG_ARCH_OMAP16XX) && \ - !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" -#endif - -#ifndef __ASSEMBLER__ - -#include - -extern void prevent_idle_sleep(void); -extern void allow_idle_sleep(void); - -/** - * clk_deny_idle - Prevents the clock from being idled during MPU idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -/** - * clk_allow_idle - Counters previous clk_deny_idle - * @clk: clock signal handle - */ -void clk_deny_idle(struct clk *clk); - -extern void omap_pm_idle(void); -extern void omap_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); -extern void omap1510_cpu_suspend(unsigned short, unsigned short); -extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision); -extern void omap730_idle_loop_suspend(void); -extern void omap1510_idle_loop_suspend(void); -extern void omap1610_idle_loop_suspend(void); -extern void omap24xx_idle_loop_suspend(void); - -extern unsigned int omap730_cpu_suspend_sz; -extern unsigned int omap1510_cpu_suspend_sz; -extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; -extern unsigned int omap1510_idle_loop_suspend_sz; -extern unsigned int omap1610_idle_loop_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; - -#ifdef CONFIG_OMAP_SERIAL_WAKE -extern void omap_serial_wake_trigger(int enable); -#else -#define omap_serial_wakeup_init() {} -#define omap_serial_wake_trigger(x) {} -#endif /* CONFIG_OMAP_SERIAL_WAKE */ - -#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x) -#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x)) -#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] - -#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x) -#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x)) -#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] - -#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x) -#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) -#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] - -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] - -#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) -#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] - -#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x)) -#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] - -#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x -#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] -#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] - -/* - * List of global OMAP registers to preserve. - * More ones like CP and general purpose register values are preserved - * with the stack pointer in sleep.S. - */ - -enum arm_save_state { - ARM_SLEEP_SAVE_START = 0, - /* - * MPU control registers 32 bits - */ - ARM_SLEEP_SAVE_ARM_CKCTL, - ARM_SLEEP_SAVE_ARM_IDLECT1, - ARM_SLEEP_SAVE_ARM_IDLECT2, - ARM_SLEEP_SAVE_ARM_IDLECT3, - ARM_SLEEP_SAVE_ARM_EWUPCT, - ARM_SLEEP_SAVE_ARM_RSTCT1, - ARM_SLEEP_SAVE_ARM_RSTCT2, - ARM_SLEEP_SAVE_ARM_SYSST, - ARM_SLEEP_SAVE_SIZE -}; - -enum dsp_save_state { - DSP_SLEEP_SAVE_START = 0, - /* - * DSP registers 16 bits - */ - DSP_SLEEP_SAVE_DSP_IDLECT2, - DSP_SLEEP_SAVE_SIZE -}; - -enum ulpd_save_state { - ULPD_SLEEP_SAVE_START = 0, - /* - * ULPD registers 16 bits - */ - ULPD_SLEEP_SAVE_ULPD_IT_STATUS, - ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL, - ULPD_SLEEP_SAVE_ULPD_SOFT_REQ, - ULPD_SLEEP_SAVE_ULPD_STATUS_REQ, - ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL, - ULPD_SLEEP_SAVE_ULPD_POWER_CTRL, - ULPD_SLEEP_SAVE_SIZE -}; - -enum mpui1510_save_state { - MPUI1510_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI1510_SLEEP_SAVE_MPUI_CTRL, - MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI1510_SLEEP_SAVE_EMIFS_CONFIG, - MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR, -#if defined(CONFIG_ARCH_OMAP15XX) - MPUI1510_SLEEP_SAVE_SIZE -#else - MPUI1510_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE -#else - MPUI730_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum mpui1610_save_state { - MPUI1610_SLEEP_SAVE_START = 0, - /* - * MPUI registers 32 bits - */ - MPUI1610_SLEEP_SAVE_MPUI_CTRL, - MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI1610_SLEEP_SAVE_EMIFS_CONFIG, - MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR, - MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR, -#if defined(CONFIG_ARCH_OMAP16XX) - MPUI1610_SLEEP_SAVE_SIZE -#else - MPUI1610_SLEEP_SAVE_SIZE = 0 -#endif -}; - -enum omap24xx_save_state { - OMAP24XX_SLEEP_SAVE_START = 0, - OMAP24XX_SLEEP_SAVE_INTC_MIR0, - OMAP24XX_SLEEP_SAVE_INTC_MIR1, - OMAP24XX_SLEEP_SAVE_INTC_MIR2, - - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP, - OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM, - - OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP, - OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM, - - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP, - OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM, - - OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE, - OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE, - OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1, - OMAP24XX_SLEEP_SAVE_GPIO3_OE, - OMAP24XX_SLEEP_SAVE_GPIO4_OE, - OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT, - OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX, - OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0, - OMAP24XX_SLEEP_SAVE_SIZE -}; - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_OMAP_PM_H */ diff --git a/include/asm-arm/arch-omap/prcm.h b/include/asm-arm/arch-omap/prcm.h deleted file mode 100644 index 7bcaf94bde9f..000000000000 --- a/include/asm-arm/arch-omap/prcm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/prcm.h - * - * Access definations for use in OMAP24XX clock and power management - * - * Copyright (C) 2005 Texas Instruments, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARM_ARCH_DPM_PRCM_H -#define __ASM_ARM_ARCH_DPM_PRCM_H - -u32 omap_prcm_get_reset_sources(void); - -#endif - - - - - diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h deleted file mode 100644 index 673b3965befc..000000000000 --- a/include/asm-arm/arch-omap/sdrc.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef ____ASM_ARCH_SDRC_H -#define ____ASM_ARCH_SDRC_H - -/* - * OMAP2/3 SDRC/SMS register definitions - * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include - -/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ - -#define SDRC_SYSCONFIG 0x010 -#define SDRC_DLLA_CTRL 0x060 -#define SDRC_DLLA_STATUS 0x064 -#define SDRC_DLLB_CTRL 0x068 -#define SDRC_DLLB_STATUS 0x06C -#define SDRC_POWER 0x070 -#define SDRC_MR_0 0x084 -#define SDRC_RFR_CTRL_0 0x0a4 - -/* - * These values represent the number of memory clock cycles between - * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 - * rows per device, and include a subtraction of a 50 cycle window in the - * event that the autorefresh command is delayed due to other SDRC activity. - * The '| 1' sets the ARE field to send one autorefresh when the autorefresh - * counter reaches 0. - * - * These represent optimal values for common parts, it won't work for all. - * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the opposite direction. If you - * don't adjust it down as your clock period increases the refresh interval - * will not be met. Setting all parameters for complete worst case may work, - * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. - * - * Only the FULL speed values are given. Current code is such that rate - * changes must be made at DPLLoutx2. The actual value adjustment for low - * frequency operation will be handled by omap_set_performance() - * - * By having the boot loader boot up in the fastest L4 speed available likely - * will result in something which you can switch between. - */ -#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) -#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) -#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) -#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ -#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ - - -/* - * SMS register access - */ - - -#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) -#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) -#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) - -/* SMS register offsets - read/write with sms_{read,write}_reg() */ - -#define SMS_SYSCONFIG 0x010 -/* REVISIT: fill in other SMS registers here */ - -#endif diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h deleted file mode 100644 index 79a5297af9fc..000000000000 --- a/include/asm-arm/arch-omap/serial.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/serial.h - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_SERIAL_H -#define __ASM_ARCH_SERIAL_H - -#if defined(CONFIG_ARCH_OMAP1) -/* OMAP1 serial ports */ -#define OMAP_UART1_BASE 0xfffb0000 -#define OMAP_UART2_BASE 0xfffb0800 -#define OMAP_UART3_BASE 0xfffb9800 -#elif defined(CONFIG_ARCH_OMAP2) -/* OMAP2 serial ports */ -#define OMAP_UART1_BASE 0x4806a000 -#define OMAP_UART2_BASE 0x4806c000 -#define OMAP_UART3_BASE 0x4806e000 -#endif - -#define OMAP_MAX_NR_PORTS 3 -#define OMAP1510_BASE_BAUD (12000000/16) -#define OMAP16XX_BASE_BAUD (48000000/16) - -#define is_omap_port(p) ({int __ret = 0; \ - if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ - p == IO_ADDRESS(OMAP_UART2_BASE) || \ - p == IO_ADDRESS(OMAP_UART3_BASE)) \ - __ret = 1; \ - __ret; \ - }) - -#endif diff --git a/include/asm-arm/arch-omap/sram.h b/include/asm-arm/arch-omap/sram.h deleted file mode 100644 index be59f4a9828b..000000000000 --- a/include/asm-arm/arch-omap/sram.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/sram.h - * - * Interface for functions that need to be run in internal SRAM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_OMAP_SRAM_H -#define __ARCH_ARM_OMAP_SRAM_H - -extern int __init omap_sram_init(void); -extern void * omap_sram_push(void * start, unsigned long size); -extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl); - -extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); - -/* Do not use these */ -extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap1_sram_reprogram_clock_sz; - -extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl); -extern unsigned long omap24xx_sram_reprogram_clock_sz; - -extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap242x_sram_ddr_init_sz; - -extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap242x_sram_set_prcm_sz; - -extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap242x_sram_reprogram_sdrc_sz; - - -extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, - u32 base_cs, u32 force_unlock); -extern unsigned long omap243x_sram_ddr_init_sz; - -extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, - int bypass); -extern unsigned long omap243x_sram_set_prcm_sz; - -extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, - u32 mem_type); -extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -#endif diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h deleted file mode 100644 index 176d9d6c258e..000000000000 --- a/include/asm-arm/arch-omap/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copied from linux/include/asm-arm/arch-sa1100/system.h - * Copyright (c) 1999 Nicolas Pitre - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H -#include - -#include -#include - -#ifndef CONFIG_MACH_VOICEBLUE -#define voiceblue_reset() do {} while (0) -#endif - -extern void omap_prcm_arch_reset(char mode); - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void omap1_arch_reset(char mode) -{ - /* - * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 - * "Global Software Reset Affects Traffic Controller Frequency". - */ - if (cpu_is_omap5912()) { - omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), - DPLL_CTL); - omap_writew(0x8, ARM_RSTCT1); - } - - if (machine_is_voiceblue()) - voiceblue_reset(); - else - omap_writew(1, ARM_RSTCT1); -} - -static inline void arch_reset(char mode) -{ - if (!cpu_is_omap24xx()) - omap1_arch_reset(mode); - else - omap_prcm_arch_reset(mode); -} - -#endif diff --git a/include/asm-arm/arch-omap/tc.h b/include/asm-arm/arch-omap/tc.h deleted file mode 100644 index 65a9c82d3bf7..000000000000 --- a/include/asm-arm/arch-omap/tc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/tc.h - * - * OMAP Traffic Controller - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_TC_H -#define __ASM_ARCH_TC_H - -#define TCMIF_BASE 0xfffecc00 -#define OMAP_TC_OCPT1_PRIOR (TCMIF_BASE + 0x00) -#define OMAP_TC_EMIFS_PRIOR (TCMIF_BASE + 0x04) -#define OMAP_TC_EMIFF_PRIOR (TCMIF_BASE + 0x08) -#define EMIFS_CONFIG (TCMIF_BASE + 0x0c) -#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) -#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) -#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) -#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) -#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) -#define EMIFF_MRS (TCMIF_BASE + 0x24) -#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) -#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) -#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) -#define TC_ENDIANISM (TCMIF_BASE + 0x34) -#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) -#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) -#define EMIFS_ACS0 (TCMIF_BASE + 0x50) -#define EMIFS_ACS1 (TCMIF_BASE + 0x54) -#define EMIFS_ACS2 (TCMIF_BASE + 0x58) -#define EMIFS_ACS3 (TCMIF_BASE + 0x5c) -#define OMAP_TC_OCPT2_PRIOR (TCMIF_BASE + 0xd0) - -/* external EMIFS chipselect regions */ -#define OMAP_CS0_PHYS 0x00000000 -#define OMAP_CS0_SIZE SZ_64M - -#define OMAP_CS1_PHYS 0x04000000 -#define OMAP_CS1_SIZE SZ_64M - -#define OMAP_CS1A_PHYS OMAP_CS1_PHYS -#define OMAP_CS1A_SIZE SZ_32M - -#define OMAP_CS1B_PHYS (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE) -#define OMAP_CS1B_SIZE SZ_32M - -#define OMAP_CS2_PHYS 0x08000000 -#define OMAP_CS2_SIZE SZ_64M - -#define OMAP_CS2A_PHYS OMAP_CS2_PHYS -#define OMAP_CS2A_SIZE SZ_32M - -#define OMAP_CS2B_PHYS (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE) -#define OMAP_CS2B_SIZE SZ_32M - -#define OMAP_CS3_PHYS 0x0c000000 -#define OMAP_CS3_SIZE SZ_64M - -#ifndef __ASSEMBLER__ - -/* EMIF Slow Interface Configuration Register */ -#define OMAP_EMIFS_CONFIG_FR (1 << 4) -#define OMAP_EMIFS_CONFIG_PDE (1 << 3) -#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) -#define OMAP_EMIFS_CONFIG_BM (1 << 1) -#define OMAP_EMIFS_CONFIG_WP (1 << 0) - -#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) -#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) - -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - -#endif /* __ASSEMBLER__ */ - -#endif /* __ASM_ARCH_TC_H */ diff --git a/include/asm-arm/arch-omap/timex.h b/include/asm-arm/arch-omap/timex.h deleted file mode 100644 index 21f2e367185a..000000000000 --- a/include/asm-arm/arch-omap/timex.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/timex.h - * - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#if !defined(__ASM_ARCH_OMAP_TIMEX_H) -#define __ASM_ARCH_OMAP_TIMEX_H - -/* - * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer, - * and that's why the CLOCK_TICK_RATE is not 32768. - */ -#ifdef CONFIG_OMAP_32K_TIMER -#define CLOCK_TICK_RATE (CONFIG_OMAP_32K_TIMER_HZ) -#else -#define CLOCK_TICK_RATE (HZ * 100000UL) -#endif - -#endif /* __ASM_ARCH_OMAP_TIMEX_H */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h deleted file mode 100644 index aca0adfef1b8..000000000000 --- a/include/asm-arm/arch-omap/uncompress.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/uncompress.h - * - * Serial port stubs for kernel decompress status messages - * - * Initially based on: - * linux-2.4.15-rmk1-dsplinux1.6/include/asm-arm/arch-omap1510/uncompress.h - * Copyright (C) 2000 RidgeRun, Inc. - * Author: Greg Lonnon - * - * Rewritten by: - * Author: - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include - -unsigned int system_rev; - -#define UART_OMAP_MDR1 0x08 /* mode definition register */ -#define OMAP_ID_730 0x355F -#define ID_MASK 0x7fff -#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) -#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK - -static void putc(int c) -{ - volatile u8 * uart = 0; - int shift = 2; - -#ifdef CONFIG_MACH_OMAP_PALMTE - return; -#endif - -#ifdef CONFIG_ARCH_OMAP -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - uart = (volatile u8 *)(OMAP_UART3_BASE); -#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) - uart = (volatile u8 *)(OMAP_UART2_BASE); -#else - uart = (volatile u8 *)(OMAP_UART1_BASE); -#endif - -#ifdef CONFIG_ARCH_OMAP1 - /* Determine which serial port to use */ - do { - /* MMU is not on, so cpu_is_omapXXXX() won't work here */ - unsigned int omap_id = omap_get_id(); - - if (omap_id == OMAP_ID_730) - shift = 0; - - if (check_port(uart, shift)) - break; - /* Silent boot if no serial ports are enabled. */ - return; - } while (0); -#endif /* CONFIG_ARCH_OMAP1 */ -#endif - - /* - * Now, xmit each character - */ - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = c; -} - -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h deleted file mode 100644 index ddf1861e6df9..000000000000 --- a/include/asm-arm/arch-omap/usb.h +++ /dev/null @@ -1,141 +0,0 @@ -// include/asm-arm/mach-omap/usb.h - -#ifndef __ASM_ARCH_OMAP_USB_H -#define __ASM_ARCH_OMAP_USB_H - -#include - -/*-------------------------------------------------------------------------*/ - -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) - -#endif /* __ASM_ARCH_OMAP_USB_H */ diff --git a/include/asm-arm/arch-omap/vmalloc.h b/include/asm-arm/arch-omap/vmalloc.h deleted file mode 100644 index 5b8bd8dae8be..000000000000 --- a/include/asm-arm/arch-omap/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/vmalloc.h - * - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) - diff --git a/include/asm-arm/arch-orion5x/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S deleted file mode 100644 index 4f98f3ba2929..000000000000 --- a/include/asm-arm/arch-orion5x/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/debug-macro.S - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION5X_REGS_PHYS_BASE - ldrne \rx, =ORION5X_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-orion5x/dma.h b/include/asm-arm/arch-orion5x/dma.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/include/asm-arm/arch-orion5x/dma.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/include/asm-arm/arch-orion5x/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S deleted file mode 100644 index d8ef54c0ee9a..000000000000 --- a/include/asm-arm/arch-orion5x/entry-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/entry-macro.S - * - * Low-level IRQ helper macros for Orion platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =MAIN_IRQ_CAUSE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #0] @ main cause - ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask - mov \irqnr, #0 @ default irqnr - @ find cause bits that are unmasked - ands \irqstat, \irqstat, \tmp @ clear Z flag if any - clzne \irqnr, \irqstat @ calc irqnr - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/include/asm-arm/arch-orion5x/gpio.h b/include/asm-arm/arch-orion5x/gpio.h deleted file mode 100644 index c85e498388b6..000000000000 --- a/include/asm-arm/arch-orion5x/gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/gpio.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -extern int gpio_request(unsigned pin, const char *label); -extern void gpio_free(unsigned pin); -extern int gpio_direction_input(unsigned pin); -extern int gpio_direction_output(unsigned pin, int value); -extern int gpio_get_value(unsigned pin); -extern void gpio_set_value(unsigned pin, int value); -extern void orion5x_gpio_set_blink(unsigned pin, int blink); -extern void gpio_display(void); /* debug */ - -static inline int gpio_to_irq(int pin) -{ - return pin + IRQ_ORION5X_GPIO_START; -} - -static inline int irq_to_gpio(int irq) -{ - return irq - IRQ_ORION5X_GPIO_START; -} - -#include /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion5x/hardware.h b/include/asm-arm/arch-orion5x/hardware.h deleted file mode 100644 index 5d2d8e0b5630..000000000000 --- a/include/asm-arm/arch-orion5x/hardware.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "orion5x.h" - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE - - -#endif diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h deleted file mode 100644 index 59f1bc96a23b..000000000000 --- a/include/asm-arm/arch-orion5x/io.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/io.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "orion5x.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem * -__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) -{ - void __iomem *retval; - unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE; - if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE && - size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) { - retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs; - } else { - retval = __arm_ioremap(paddr, size, mtype); - } - - return retval; -} - -static inline void -__arch_iounmap(void __iomem *addr) -{ - if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || - addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) - __iounmap(addr); -} - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) -#define __arch_iounmap(a) __arch_iounmap(a) -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -/***************************************************************************** - * Helpers to access Orion registers - ****************************************************************************/ -/* - * These are not preempt-safe. Locks, if needed, must be taken - * care of by the caller. - */ -#define orion5x_setbits(r, mask) writel(readl(r) | (mask), (r)) -#define orion5x_clrbits(r, mask) writel(readl(r) & ~(mask), (r)) - - -#endif diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h deleted file mode 100644 index abdd61a4833a..000000000000 --- a/include/asm-arm/arch-orion5x/irqs.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/irqs.h - * - * IRQ definitions for Orion SoC - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "orion5x.h" /* need GPIO_MAX */ - -/* - * Orion Main Interrupt Controller - */ -#define IRQ_ORION5X_BRIDGE 0 -#define IRQ_ORION5X_DOORBELL_H2C 1 -#define IRQ_ORION5X_DOORBELL_C2H 2 -#define IRQ_ORION5X_UART0 3 -#define IRQ_ORION5X_UART1 4 -#define IRQ_ORION5X_I2C 5 -#define IRQ_ORION5X_GPIO_0_7 6 -#define IRQ_ORION5X_GPIO_8_15 7 -#define IRQ_ORION5X_GPIO_16_23 8 -#define IRQ_ORION5X_GPIO_24_31 9 -#define IRQ_ORION5X_PCIE0_ERR 10 -#define IRQ_ORION5X_PCIE0_INT 11 -#define IRQ_ORION5X_USB1_CTRL 12 -#define IRQ_ORION5X_DEV_BUS_ERR 14 -#define IRQ_ORION5X_PCI_ERR 15 -#define IRQ_ORION5X_USB_BR_ERR 16 -#define IRQ_ORION5X_USB0_CTRL 17 -#define IRQ_ORION5X_ETH_RX 18 -#define IRQ_ORION5X_ETH_TX 19 -#define IRQ_ORION5X_ETH_MISC 20 -#define IRQ_ORION5X_ETH_SUM 21 -#define IRQ_ORION5X_ETH_ERR 22 -#define IRQ_ORION5X_IDMA_ERR 23 -#define IRQ_ORION5X_IDMA_0 24 -#define IRQ_ORION5X_IDMA_1 25 -#define IRQ_ORION5X_IDMA_2 26 -#define IRQ_ORION5X_IDMA_3 27 -#define IRQ_ORION5X_CESA 28 -#define IRQ_ORION5X_SATA 29 -#define IRQ_ORION5X_XOR0 30 -#define IRQ_ORION5X_XOR1 31 - -/* - * Orion General Purpose Pins - */ -#define IRQ_ORION5X_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/include/asm-arm/arch-orion5x/memory.h b/include/asm-arm/arch-orion5x/memory.h deleted file mode 100644 index 80053a7afc7a..000000000000 --- a/include/asm-arm/arch-orion5x/memory.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/memory.h - * - * Marvell Orion memory definitions - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x00000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - -#endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h deleted file mode 100644 index 10257f5c5e9e..000000000000 --- a/include/asm-arm/arch-orion5x/orion5x.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/orion5x.h - * - * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-VoIP, Orion-NAS, and Orion-2. - * - * Maintainer: Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_ORION5X_H -#define __ASM_ARCH_ORION5X_H - -/***************************************************************************** - * Orion Address Maps - * - * phys - * e0000000 PCIe MEM space - * e8000000 PCI MEM space - * f0000000 PCIe WA space (Orion-1/Orion-NAS only) - * f1000000 on-chip peripheral registers - * f2000000 PCIe I/O space - * f2100000 PCI I/O space - * f4000000 device bus mappings (boot) - * fa000000 device bus mappings (cs0) - * fa800000 device bus mappings (cs2) - * fc000000 device bus mappings (cs0/cs1) - * - * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) - ****************************************************************************/ -#define ORION5X_REGS_PHYS_BASE 0xf1000000 -#define ORION5X_REGS_VIRT_BASE 0xfdd00000 -#define ORION5X_REGS_SIZE SZ_1M - -#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 -#define ORION5X_PCIE_IO_BUS_BASE 0x00000000 -#define ORION5X_PCIE_IO_SIZE SZ_1M - -#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION5X_PCI_IO_BUS_BASE 0x00100000 -#define ORION5X_PCI_IO_SIZE SZ_1M - -/* Relevant only for Orion-1/Orion-NAS */ -#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 -#define ORION5X_PCIE_WA_SIZE SZ_16M - -#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 -#define ORION5X_PCIE_MEM_SIZE SZ_128M - -#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 -#define ORION5X_PCI_MEM_SIZE SZ_128M - -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 - -/******************************************************************************* - * Orion Registers Map - ******************************************************************************/ -#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) - -#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) -#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) -#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) -#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) - -#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - -#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) - -#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) - -#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) -#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) - -#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) -#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) - -#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) -#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) - -#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) -#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) - -/******************************************************************************* - * Device Bus Registers - ******************************************************************************/ -#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000) -#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004) -#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050) -#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008) -#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010) -#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108) -#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c) -#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c) -#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460) -#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464) -#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c) -#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0) -#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) -#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -#define GPIO_MAX 32 - -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - - -#endif diff --git a/include/asm-arm/arch-orion5x/system.h b/include/asm-arm/arch-orion5x/system.h deleted file mode 100644 index 3f1d1e2d38f8..000000000000 --- a/include/asm-arm/arch-orion5x/system.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/system.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - /* - * Enable and issue soft reset - */ - orion5x_setbits(CPU_RESET_MASK, (1 << 2)); - orion5x_setbits(CPU_SOFT_RESET, 1); -} - - -#endif diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h deleted file mode 100644 index 31c568e28cc3..000000000000 --- a/include/asm-arm/arch-orion5x/timex.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/timex.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define ORION5X_TCLK 166666667 diff --git a/include/asm-arm/arch-orion5x/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h deleted file mode 100644 index 7548cedf2d76..000000000000 --- a/include/asm-arm/arch-orion5x/uncompress.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/uncompress.h - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-orion5x/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h deleted file mode 100644 index 2b3061e90dc1..000000000000 --- a/include/asm-arm/arch-orion5x/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * include/asm-arm/arch-orion5x/vmalloc.h - */ - -#define VMALLOC_END 0xfd800000 diff --git a/include/asm-arm/arch-pnx4008/clock.h b/include/asm-arm/arch-pnx4008/clock.h deleted file mode 100644 index ce155e161269..000000000000 --- a/include/asm-arm/arch-pnx4008/clock.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/clock.h - * - * Clock control driver for PNX4008 - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_CLOCK_H__ -#define __PNX4008_CLOCK_H__ - -struct module; -struct clk; - -#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE) -#define HCLKDIVCTRL_REG (PWRMAN_VA_BASE + 0x40) -#define PWRCTRL_REG (PWRMAN_VA_BASE + 0x44) -#define PLLCTRL_REG (PWRMAN_VA_BASE + 0x48) -#define OSC13CTRL_REG (PWRMAN_VA_BASE + 0x4c) -#define SYSCLKCTRL_REG (PWRMAN_VA_BASE + 0x50) -#define HCLKPLLCTRL_REG (PWRMAN_VA_BASE + 0x58) -#define USBCTRL_REG (PWRMAN_VA_BASE + 0x64) -#define SDRAMCLKCTRL_REG (PWRMAN_VA_BASE + 0x68) -#define MSCTRL_REG (PWRMAN_VA_BASE + 0x80) -#define BTCLKCTRL (PWRMAN_VA_BASE + 0x84) -#define DUMCLKCTRL_REG (PWRMAN_VA_BASE + 0x90) -#define I2CCLKCTRL_REG (PWRMAN_VA_BASE + 0xac) -#define KEYCLKCTRL_REG (PWRMAN_VA_BASE + 0xb0) -#define TSCLKCTRL_REG (PWRMAN_VA_BASE + 0xb4) -#define PWMCLKCTRL_REG (PWRMAN_VA_BASE + 0xb8) -#define TIMCLKCTRL_REG (PWRMAN_VA_BASE + 0xbc) -#define SPICTRL_REG (PWRMAN_VA_BASE + 0xc4) -#define FLASHCLKCTRL_REG (PWRMAN_VA_BASE + 0xc8) -#define UART3CLK_REG (PWRMAN_VA_BASE + 0xd0) -#define UARTCLKCTRL_REG (PWRMAN_VA_BASE + 0xe4) -#define DMACLKCTRL_REG (PWRMAN_VA_BASE + 0xe8) -#define AUTOCLK_CTRL (PWRMAN_VA_BASE + 0xec) -#define JPEGCLKCTRL_REG (PWRMAN_VA_BASE + 0xfc) - -#define AUDIOCONFIG_VA_BASE IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE) -#define DSPPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x60) -#define DSPCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x64) -#define AUDIOCLKCTRL_REG (AUDIOCONFIG_VA_BASE + 0x68) -#define AUDIOPLLCTRL_REG (AUDIOCONFIG_VA_BASE + 0x6C) - -#define USB_OTG_CLKCTRL_REG IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4) - -#define VFP9CLKCTRL_REG IO_ADDRESS(PNX4008_DEBUG_BASE) - -#define CLK_RATE_13MHZ 13000 -#define CLK_RATE_1MHZ 1000 -#define CLK_RATE_208MHZ 208000 -#define CLK_RATE_48MHZ 48000 -#define CLK_RATE_32KHZ 32 - -#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */ - -#endif diff --git a/include/asm-arm/arch-pnx4008/debug-macro.S b/include/asm-arm/arch-pnx4008/debug-macro.S deleted file mode 100644 index 67d18a203d23..000000000000 --- a/include/asm-arm/arch-pnx4008/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-pnx4008/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00090000 - addeq \rx, \rx, #0x40000000 - addne \rx, \rx, #0xf4000000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-pnx4008/dma.h b/include/asm-arm/arch-pnx4008/dma.h deleted file mode 100644 index 418f15283ff1..000000000000 --- a/include/asm-arm/arch-pnx4008/dma.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/dma.h - * - * PNX4008 DMA header file - * - * Author: Vitaly Wool - * Copyright: MontaVista Software Inc. (c) 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "platform.h" - -#define MAX_DMA_ADDRESS 0xffffffff - -#define MAX_DMA_CHANNELS 8 - -#define DMAC_BASE IO_ADDRESS(PNX4008_DMA_CONFIG_BASE) -#define DMAC_INT_STAT (DMAC_BASE + 0x0000) -#define DMAC_INT_TC_STAT (DMAC_BASE + 0x0004) -#define DMAC_INT_TC_CLEAR (DMAC_BASE + 0x0008) -#define DMAC_INT_ERR_STAT (DMAC_BASE + 0x000c) -#define DMAC_INT_ERR_CLEAR (DMAC_BASE + 0x0010) -#define DMAC_SOFT_SREQ (DMAC_BASE + 0x0024) -#define DMAC_CONFIG (DMAC_BASE + 0x0030) -#define DMAC_Cx_SRC_ADDR(c) (DMAC_BASE + 0x0100 + (c) * 0x20) -#define DMAC_Cx_DEST_ADDR(c) (DMAC_BASE + 0x0104 + (c) * 0x20) -#define DMAC_Cx_LLI(c) (DMAC_BASE + 0x0108 + (c) * 0x20) -#define DMAC_Cx_CONTROL(c) (DMAC_BASE + 0x010c + (c) * 0x20) -#define DMAC_Cx_CONFIG(c) (DMAC_BASE + 0x0110 + (c) * 0x20) - -enum { - WIDTH_BYTE = 0, - WIDTH_HWORD, - WIDTH_WORD -}; - -enum { - FC_MEM2MEM_DMA, - FC_MEM2PER_DMA, - FC_PER2MEM_DMA, - FC_PER2PER_DMA, - FC_PER2PER_DPER, - FC_MEM2PER_PER, - FC_PER2MEM_PER, - FC_PER2PER_SPER -}; - -enum { - DMA_INT_UNKNOWN = 0, - DMA_ERR_INT = 1, - DMA_TC_INT = 2, -}; - -enum { - DMA_BUFFER_ALLOCATED = 1, - DMA_HAS_LL = 2, -}; - -enum { - PER_CAM_DMA_1 = 0, - PER_NDF_FLASH = 1, - PER_MBX_SLAVE_FIFO = 2, - PER_SPI2_REC_XMIT = 3, - PER_MS_SD_RX_XMIT = 4, - PER_HS_UART_1_XMIT = 5, - PER_HS_UART_1_RX = 6, - PER_HS_UART_2_XMIT = 7, - PER_HS_UART_2_RX = 8, - PER_HS_UART_7_XMIT = 9, - PER_HS_UART_7_RX = 10, - PER_SPI1_REC_XMIT = 11, - PER_MLC_NDF_SREC = 12, - PER_CAM_DMA_2 = 13, - PER_PRNG_INFIFO = 14, - PER_PRNG_OUTFIFO = 15, -}; - -struct pnx4008_dma_ch_ctrl { - int tc_mask; - int cacheable; - int bufferable; - int priv_mode; - int di; - int si; - int dest_ahb1; - int src_ahb1; - int dwidth; - int swidth; - int dbsize; - int sbsize; - int tr_size; -}; - -struct pnx4008_dma_ch_config { - int halt; - int active; - int lock; - int itc; - int ie; - int flow_cntrl; - int dest_per; - int src_per; -}; - -struct pnx4008_dma_ll { - unsigned long src_addr; - unsigned long dest_addr; - u32 next_dma; - unsigned long ch_ctrl; - struct pnx4008_dma_ll *next; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -struct pnx4008_dma_config { - int is_ll; - unsigned long src_addr; - unsigned long dest_addr; - unsigned long ch_ctrl; - unsigned long ch_cfg; - struct pnx4008_dma_ll *ll; - u32 ll_dma; - int flags; - void *alloc_data; - int (*free) (void *); -}; - -extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *); -extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t); -extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *); - -extern int pnx4008_request_channel(char *, int, - void (*)(int, int, void *), - void *); -extern void pnx4008_free_channel(int); -extern int pnx4008_config_dma(int, int, int); -extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *, - unsigned long *); -extern int pnx4008_dma_parse_control(unsigned long, - struct pnx4008_dma_ch_ctrl *); -extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *, - unsigned long *); -extern int pnx4008_dma_parse_config(unsigned long, - struct pnx4008_dma_ch_config *); -extern int pnx4008_config_channel(int, struct pnx4008_dma_config *); -extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *); -extern int pnx4008_dma_ch_enable(int); -extern int pnx4008_dma_ch_disable(int); -extern int pnx4008_dma_ch_enabled(int); -extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *, - struct pnx4008_dma_ch_ctrl *); -extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *, - struct pnx4008_dma_ch_ctrl *); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-pnx4008/entry-macro.S b/include/asm-arm/arch-pnx4008/entry-macro.S deleted file mode 100644 index f11731974e5d..000000000000 --- a/include/asm-arm/arch-pnx4008/entry-macro.S +++ /dev/null @@ -1,127 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/entry-macro.S - * - * Low-level IRQ helper macros for PNX4008-based platforms - * - * 2005-2006 (c) MontaVista Software, Inc. - * Author: Vitaly Wool - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include "platform.h" - -#define IO_BASE 0xF0000000 -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#define INTRC_MASK 0x00 -#define INTRC_RAW_STAT 0x04 -#define INTRC_STAT 0x08 -#define INTRC_POLAR 0x0C -#define INTRC_ACT_TYPE 0x10 -#define INTRC_TYPE 0x14 - -#define SIC1_BASE_INT 32 -#define SIC2_BASE_INT 64 - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -/* decode the MIC interrupt numbers */ - ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) - ldr \irqstat, [\base, #INTRC_STAT] - - cmp \irqstat,#1<<16 - movhs \irqnr,#16 - movlo \irqnr,#0 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - -/* was there an interrupt ? if not then drop out with EQ status */ - teq \irqstat,#0 - beq 1003f - -/* and now check for extended IRQ reasons */ - cmp \irqnr,#1 - bls 1003f - cmp \irqnr,#30 - blo 1002f - -/* IRQ 31,30 : High priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */ -/* set the base IRQ number */ - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - moveq \irqnr,#SIC1_BASE_INT - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - movne \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - and \irqstat,\irqstat,\tmp - b 1004f - -1003: -/* IRQ 1,0 : Low priority cascade IRQ handle */ -/* read the correct SIC */ -/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/ -/* read the correct SIC */ -/* set the base IRQ number */ - ldrne \base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) - movne \irqnr,#SIC1_BASE_INT - ldreq \base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - moveq \irqnr,#SIC2_BASE_INT - ldr \irqstat, [\base, #INTRC_STAT] - ldr \tmp, [\base, #INTRC_TYPE] -/* and with inverted mask : low priority interrupts */ - bic \irqstat,\irqstat,\tmp - -1004: - - cmp \irqstat,#1<<16 - addhs \irqnr,\irqnr,#16 - movhs \irqstat,\irqstat,lsr#16 - cmp \irqstat,#1<<8 - addhs \irqnr,\irqnr,#8 - movhs \irqstat,\irqstat,lsr#8 - cmp \irqstat,#1<<4 - addhs \irqnr,\irqnr,#4 - movhs \irqstat,\irqstat,lsr#4 - cmp \irqstat,#1<<2 - addhs \irqnr,\irqnr,#2 - movhs \irqstat,\irqstat,lsr#2 - cmp \irqstat,#1<<1 - addhs \irqnr,\irqnr,#1 - - -/* is irqstat not zero */ - -1002: -/* we assert that irqstat is not equal to zero and return ne status if true*/ - teq \irqstat,#0 -1003: - .endm - - - .macro irq_prio_table - .endm - - diff --git a/include/asm-arm/arch-pnx4008/gpio.h b/include/asm-arm/arch-pnx4008/gpio.h deleted file mode 100644 index d01bf83d55c2..000000000000 --- a/include/asm-arm/arch-pnx4008/gpio.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/gpio.h - * - * PNX4008 GPIO driver - header file - * - * Author: Dmitry Chigirev - * - * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips: - * Copyright (c) 2005 Koninklijke Philips Electronics N.V. - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef _PNX4008_GPIO_H_ -#define _PNX4008_GPIO_H_ - - -/* Block numbers */ -#define GPIO_IN (0) -#define GPIO_OUT (0x100) -#define GPIO_BID (0x200) -#define GPIO_RAM (0x300) -#define GPIO_MUX (0x400) - -#define GPIO_TYPE_MASK(K) ((K) & 0x700) - -/* INPUT GPIOs */ -/* GPI */ -#define GPI_00 (GPIO_IN | 0) -#define GPI_01 (GPIO_IN | 1) -#define GPI_02 (GPIO_IN | 2) -#define GPI_03 (GPIO_IN | 3) -#define GPI_04 (GPIO_IN | 4) -#define GPI_05 (GPIO_IN | 5) -#define GPI_06 (GPIO_IN | 6) -#define GPI_07 (GPIO_IN | 7) -#define GPI_08 (GPIO_IN | 8) -#define GPI_09 (GPIO_IN | 9) -#define U1_RX (GPIO_IN | 15) -#define U2_HTCS (GPIO_IN | 16) -#define U2_RX (GPIO_IN | 17) -#define U3_RX (GPIO_IN | 18) -#define U4_RX (GPIO_IN | 19) -#define U5_RX (GPIO_IN | 20) -#define U6_IRRX (GPIO_IN | 21) -#define U7_HCTS (GPIO_IN | 22) -#define U7_RX (GPIO_IN | 23) -/* MISC IN */ -#define SPI1_DATIN (GPIO_IN | 25) -#define DISP_SYNC (GPIO_IN | 26) -#define SPI2_DATIN (GPIO_IN | 27) -#define GPI_11 (GPIO_IN | 28) - -#define GPIO_IN_MASK 0x1eff83ff - -/* OUTPUT GPIOs */ -/* GPO */ -#define GPO_00 (GPIO_OUT | 0) -#define GPO_01 (GPIO_OUT | 1) -#define GPO_02 (GPIO_OUT | 2) -#define GPO_03 (GPIO_OUT | 3) -#define GPO_04 (GPIO_OUT | 4) -#define GPO_05 (GPIO_OUT | 5) -#define GPO_06 (GPIO_OUT | 6) -#define GPO_07 (GPIO_OUT | 7) -#define GPO_08 (GPIO_OUT | 8) -#define GPO_09 (GPIO_OUT | 9) -#define GPO_10 (GPIO_OUT | 10) -#define GPO_11 (GPIO_OUT | 11) -#define GPO_12 (GPIO_OUT | 12) -#define GPO_13 (GPIO_OUT | 13) -#define GPO_14 (GPIO_OUT | 14) -#define GPO_15 (GPIO_OUT | 15) -#define GPO_16 (GPIO_OUT | 16) -#define GPO_17 (GPIO_OUT | 17) -#define GPO_18 (GPIO_OUT | 18) -#define GPO_19 (GPIO_OUT | 19) -#define GPO_20 (GPIO_OUT | 20) -#define GPO_21 (GPIO_OUT | 21) -#define GPO_22 (GPIO_OUT | 22) -#define GPO_23 (GPIO_OUT | 23) - -#define GPIO_OUT_MASK 0xffffff - -/* BIDIRECTIONAL GPIOs */ -/* RAM pins */ -#define RAM_D19 (GPIO_RAM | 0) -#define RAM_D20 (GPIO_RAM | 1) -#define RAM_D21 (GPIO_RAM | 2) -#define RAM_D22 (GPIO_RAM | 3) -#define RAM_D23 (GPIO_RAM | 4) -#define RAM_D24 (GPIO_RAM | 5) -#define RAM_D25 (GPIO_RAM | 6) -#define RAM_D26 (GPIO_RAM | 7) -#define RAM_D27 (GPIO_RAM | 8) -#define RAM_D28 (GPIO_RAM | 9) -#define RAM_D29 (GPIO_RAM | 10) -#define RAM_D30 (GPIO_RAM | 11) -#define RAM_D31 (GPIO_RAM | 12) - -#define GPIO_RAM_MASK 0x1fff - -/* I/O pins */ -#define GPIO_00 (GPIO_BID | 25) -#define GPIO_01 (GPIO_BID | 26) -#define GPIO_02 (GPIO_BID | 27) -#define GPIO_03 (GPIO_BID | 28) -#define GPIO_04 (GPIO_BID | 29) -#define GPIO_05 (GPIO_BID | 30) - -#define GPIO_BID_MASK 0x7e000000 - -/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */ -#define GPIO_SDRAM_SEL (GPIO_MUX | 3) - -#define GPIO_MUX_MASK 0x8 - -/* Extraction/assembly macros */ -#define GPIO_BIT_MASK(K) ((K) & 0x1F) -#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K)) -#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK)) -#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK)) -#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK)) -#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK)) -#define GPIO_ISIN(K) ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK)) - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 -#define SE_USB_OTG_ATX_INT_N 19 -/*18 unused*/ -#define SE_DSP_GPIO4_INT 17 -#define SE_KEY_IRQ 16 -#define SE_DSP_SLAVEPORT_INT 15 -#define SE_DSP_GPIO1_INT 14 -#define SE_DSP_GPIO0_INT 13 -#define SE_DSP_AHB_INT 12 -/*11-6 unused*/ -#define SE_GPIO_05_INT 5 -#define SE_GPIO_04_INT 4 -#define SE_GPIO_03_INT 3 -#define SE_GPIO_02_INT 2 -#define SE_GPIO_01_INT 1 -#define SE_GPIO_00_INT 0 - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern int pnx4008_gpio_register_pin(unsigned short pin); -extern int pnx4008_gpio_unregister_pin(unsigned short pin); -extern unsigned long pnx4008_gpio_read_pin(unsigned short pin); -extern int pnx4008_gpio_write_pin(unsigned short pin, int output); -extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_direction(unsigned short pin); -extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output); -extern int pnx4008_gpio_read_pin_mux(unsigned short pin); - -static inline void start_int_umask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_mask(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_ER_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq)); -} - -static inline void start_int_ack(u8 irq) -{ - __raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq)); -} - -static inline void start_int_set_falling_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) & - ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -static inline void start_int_set_rising_edge(u8 irq) -{ - __raw_writel(__raw_readl(START_INT_APR_REG(irq)) | - START_INT_REG_BIT(irq), START_INT_APR_REG(irq)); -} - -#endif /* _PNX4008_GPIO_H_ */ diff --git a/include/asm-arm/arch-pnx4008/hardware.h b/include/asm-arm/arch-pnx4008/hardware.h deleted file mode 100644 index a4410397a921..000000000000 --- a/include/asm-arm/arch-pnx4008/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/hardware.h - * - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* Start of virtual addresses for IO devices */ -#define IO_BASE 0xF0000000 - -/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */ -#define IO_ADDRESS(x) (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE) - -#endif diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h deleted file mode 100644 index 92e8d65006f7..000000000000 --- a/include/asm-arm/arch-pnx4008/i2c.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * PNX4008-specific tweaks for I2C IP3204 block - * - * Author: Vitaly Wool - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_I2C_H__ -#define __ASM_ARCH_I2C_H__ - -#include -#include - -enum { - mstatus_tdi = 0x00000001, - mstatus_afi = 0x00000002, - mstatus_nai = 0x00000004, - mstatus_drmi = 0x00000008, - mstatus_active = 0x00000020, - mstatus_scl = 0x00000040, - mstatus_sda = 0x00000080, - mstatus_rff = 0x00000100, - mstatus_rfe = 0x00000200, - mstatus_tff = 0x00000400, - mstatus_tfe = 0x00000800, -}; - -enum { - mcntrl_tdie = 0x00000001, - mcntrl_afie = 0x00000002, - mcntrl_naie = 0x00000004, - mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, - mcntrl_tffie = 0x00000080, - mcntrl_reset = 0x00000100, - mcntrl_cdbmode = 0x00000400, -}; - -enum { - rw_bit = 1 << 0, - start_bit = 1 << 8, - stop_bit = 1 << 9, -}; - -#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ -#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ -#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ -#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ -#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ -#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ -#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ -#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ -#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ -#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ -#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ -#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ -#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ - -#define HCLK_MHZ 13 -#define I2C_CHIP_NAME "PNX4008-I2C" - -#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/include/asm-arm/arch-pnx4008/io.h b/include/asm-arm/arch-pnx4008/io.h deleted file mode 100644 index 29ee43955c52..000000000000 --- a/include/asm-arm/arch-pnx4008/io.h +++ /dev/null @@ -1,21 +0,0 @@ - -/* - * include/asm-arm/arch-pnx4008/io.h - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-pnx4008/irq.h b/include/asm-arm/arch-pnx4008/irq.h deleted file mode 100644 index fabff5dc337f..000000000000 --- a/include/asm-arm/arch-pnx4008/irq.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/irq.h - * - * PNX4008 IRQ controller driver - header file - * this one is used in entry-arnv.S as well so it cannot contain C code - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __PNX4008_IRQ_H__ -#define __PNX4008_IRQ_H__ - -#define MIC_VA_BASE IO_ADDRESS(PNX4008_INTCTRLMIC_BASE) -#define SIC1_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE) -#define SIC2_VA_BASE IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE) - -/* Manual: Chapter 20, page 195 */ - -#define INTC_BIT(irq) (1<< ((irq) & 0x1F)) - -#define INTC_ER(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9))) -#define INTC_RSR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9))) -#define INTC_SR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9))) -#define INTC_APR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9))) -#define INTC_ATR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9))) -#define INTC_ITR(irq) IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9))) - -#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F)) - -#define START_INT_ER_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1))) -#define START_INT_RSR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1))) -#define START_INT_SR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1))) -#define START_INT_APR_REG(irq) IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1))) - -extern void __init pnx4008_init_irq(void); - -#endif /* __PNX4008_IRQ_H__ */ diff --git a/include/asm-arm/arch-pnx4008/irqs.h b/include/asm-arm/arch-pnx4008/irqs.h deleted file mode 100644 index a25d18f2d87a..000000000000 --- a/include/asm-arm/arch-pnx4008/irqs.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/irqs.h - * - * PNX4008 IRQ controller driver - header file - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PNX4008_IRQS_h__ -#define __PNX4008_IRQS_h__ - -#define NR_IRQS 96 - -/*Manual: table 259, page 199*/ - -/*SUB2 Interrupt Routing (SIC2)*/ - -#define SIC2_BASE_INT 64 - -#define CLK_SWITCH_ARM_INT 95 /*manual: Clkswitch ARM */ -#define CLK_SWITCH_DSP_INT 94 /*manual: ClkSwitch DSP */ -#define CLK_SWITCH_AUD_INT 93 /*manual: Clkswitch AUD */ -#define GPI_06_INT 92 -#define GPI_05_INT 91 -#define GPI_04_INT 90 -#define GPI_03_INT 89 -#define GPI_02_INT 88 -#define GPI_01_INT 87 -#define GPI_00_INT 86 -#define BT_CLKREQ_INT 85 -#define SPI1_DATIN_INT 84 -#define U5_RX_INT 83 -#define SDIO_INT_N 82 -#define CAM_HS_INT 81 -#define CAM_VS_INT 80 -#define GPI_07_INT 79 -#define DISP_SYNC_INT 78 -#define DSP_INT8 77 -#define U7_HCTS_INT 76 -#define GPI_10_INT 75 -#define GPI_09_INT 74 -#define GPI_08_INT 73 -#define DSP_INT7 72 -#define U2_HCTS_INT 71 -#define SPI2_DATIN_INT 70 -#define GPIO_05_INT 69 -#define GPIO_04_INT 68 -#define GPIO_03_INT 67 -#define GPIO_02_INT 66 -#define GPIO_01_INT 65 -#define GPIO_00_INT 64 - -/*Manual: table 258, page 198*/ - -/*SUB1 Interrupt Routing (SIC1)*/ - -#define SIC1_BASE_INT 32 - -#define USB_I2C_INT 63 -#define USB_DEV_HP_INT 62 -#define USB_DEV_LP_INT 61 -#define USB_DEV_DMA_INT 60 -#define USB_HOST_INT 59 -#define USB_OTG_ATX_INT_N 58 -#define USB_OTG_TIMER_INT 57 -#define SW_INT 56 -#define SPI1_INT 55 -#define KEY_IRQ 54 -#define DSP_M_INT 53 -#define RTC_INT 52 -#define I2C_1_INT 51 -#define I2C_2_INT 50 -#define PLL1_LOCK_INT 49 -#define PLL2_LOCK_INT 48 -#define PLL3_LOCK_INT 47 -#define PLL4_LOCK_INT 46 -#define PLL5_LOCK_INT 45 -#define SPI2_INT 44 -#define DSP_INT1 43 -#define DSP_INT2 42 -#define DSP_TDM_INT2 41 -#define TS_AUX_INT 40 -#define TS_IRQ 39 -#define TS_P_INT 38 -#define UOUT1_TO_PAD_INT 37 -#define GPI_11_INT 36 -#define DSP_INT4 35 -#define JTAG_COMM_RX_INT 34 -#define JTAG_COMM_TX_INT 33 -#define DSP_INT3 32 - -/*Manual: table 257, page 197*/ - -/*MAIN Interrupt Routing*/ - -#define MAIN_BASE_INT 0 - -#define SUB2_FIQ_N 31 /*active low */ -#define SUB1_FIQ_N 30 /*active low */ -#define JPEG_INT 29 -#define DMA_INT 28 -#define MSTIMER_INT 27 -#define IIR1_INT 26 -#define IIR2_INT 25 -#define IIR7_INT 24 -#define DSP_TDM_INT0 23 -#define DSP_TDM_INT1 22 -#define DSP_P_INT 21 -#define DSP_INT0 20 -#define DUM_INT 19 -#define UOUT0_TO_PAD_INT 18 -#define MP4_ENC_INT 17 -#define MP4_DEC_INT 16 -#define SD0_INT 15 -#define MBX_INT 14 -#define SD1_INT 13 -#define MS_INT_N 12 -#define FLASH_INT 11 /*NAND*/ -#define IIR6_INT 10 -#define IIR5_INT 9 -#define IIR4_INT 8 -#define IIR3_INT 7 -#define WATCH_INT 6 -#define HSTIMER_INT 5 -#define ARCH_TIMER_IRQ HSTIMER_INT -#define CAM_INT 4 -#define PRNG_INT 3 -#define CRYPTO_INT 2 -#define SUB2_IRQ_N 1 /*active low */ -#define SUB1_IRQ_N 0 /*active low */ - -#define PNX4008_IRQ_TYPES \ -{ /*IRQ #'s: */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \ -IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \ -IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \ -} - -/* Start Enable Pin Interrupts - table 58 page 66 */ - -#define SE_PIN_BASE_INT 32 - -#define SE_U7_RX_INT 63 -#define SE_U7_HCTS_INT 62 -#define SE_BT_CLKREQ_INT 61 -#define SE_U6_IRRX_INT 60 -/*59 unused*/ -#define SE_U5_RX_INT 58 -#define SE_GPI_11_INT 57 -#define SE_U3_RX_INT 56 -#define SE_U2_HCTS_INT 55 -#define SE_U2_RX_INT 54 -#define SE_U1_RX_INT 53 -#define SE_DISP_SYNC_INT 52 -/*51 unused*/ -#define SE_SDIO_INT_N 50 -#define SE_MSDIO_START_INT 49 -#define SE_GPI_06_INT 48 -#define SE_GPI_05_INT 47 -#define SE_GPI_04_INT 46 -#define SE_GPI_03_INT 45 -#define SE_GPI_02_INT 44 -#define SE_GPI_01_INT 43 -#define SE_GPI_00_INT 42 -#define SE_SYSCLKEN_PIN_INT 41 -#define SE_SPI1_DATAIN_INT 40 -#define SE_GPI_07_INT 39 -#define SE_SPI2_DATAIN_INT 38 -#define SE_GPI_10_INT 37 -#define SE_GPI_09_INT 36 -#define SE_GPI_08_INT 35 -/*34-32 unused*/ - -/* Start Enable Internal Interrupts - table 57 page 65 */ - -#define SE_INT_BASE_INT 0 - -#define SE_TS_IRQ 31 -#define SE_TS_P_INT 30 -#define SE_TS_AUX_INT 29 -/*27-28 unused*/ -#define SE_USB_AHB_NEED_CLK_INT 26 -#define SE_MSTIMER_INT 25 -#define SE_RTC_INT 24 -#define SE_USB_NEED_CLK_INT 23 -#define SE_USB_INT 22 -#define SE_USB_I2C_INT 21 -#define SE_USB_OTG_TIMER_INT 20 - -#endif /* __PNX4008_IRQS_h__ */ diff --git a/include/asm-arm/arch-pnx4008/memory.h b/include/asm-arm/arch-pnx4008/memory.h deleted file mode 100644 index 0d8268a95261..000000000000 --- a/include/asm-arm/arch-pnx4008/memory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/memory.h - * - * Copyright (c) 2005 Philips Semiconductors - * Copyright (c) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET (0x80000000) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET) - -#endif diff --git a/include/asm-arm/arch-pnx4008/param.h b/include/asm-arm/arch-pnx4008/param.h deleted file mode 100644 index 95d5f547b416..000000000000 --- a/include/asm-arm/arch-pnx4008/param.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/param.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define HZ 100 diff --git a/include/asm-arm/arch-pnx4008/platform.h b/include/asm-arm/arch-pnx4008/platform.h deleted file mode 100644 index 2613c7c669b1..000000000000 --- a/include/asm-arm/arch-pnx4008/platform.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/platform.h - * - * PNX4008 Base addresses - header file - * - * Author: Dmitry Chigirev - * - * Based on reference code received from Philips: - * Copyright (C) 2003 Philips Semiconductors - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ - -#define PNX4008_IRAM_BASE 0x08000000 -#define PNX4008_IRAM_SIZE 0x00010000 -#define PNX4008_YUV_SLAVE_BASE 0x10000000 -#define PNX4008_DUM_SLAVE_BASE 0x18000000 -#define PNX4008_NDF_FLASH_BASE 0x20020000 -#define PNX4008_SPI1_BASE 0x20088000 -#define PNX4008_SPI2_BASE 0x20090000 -#define PNX4008_SD_CONFIG_BASE 0x20098000 -#define PNX4008_FLASH_DATA 0x200B0000 -#define PNX4008_MLC_FLASH_BASE 0x200B8000 -#define PNX4008_JPEG_CONFIG_BASE 0x300A0000 -#define PNX4008_DMA_CONFIG_BASE 0x31000000 -#define PNX4008_USB_CONFIG_BASE 0x31020000 -#define PNX4008_SDRAM_CFG_BASE 0x31080000 -#define PNX4008_AHB2FAB_BASE 0x40000000 -#define PNX4008_PWRMAN_BASE 0x40004000 -#define PNX4008_INTCTRLMIC_BASE 0x40008000 -#define PNX4008_INTCTRLSIC1_BASE 0x4000C000 -#define PNX4008_INTCTRLSIC2_BASE 0x40010000 -#define PNX4008_HSUART1_BASE 0x40014000 -#define PNX4008_HSUART2_BASE 0x40018000 -#define PNX4008_HSUART7_BASE 0x4001C000 -#define PNX4008_RTC_BASE 0x40024000 -#define PNX4008_PIO_BASE 0x40028000 -#define PNX4008_MSTIMER_BASE 0x40034000 -#define PNX4008_HSTIMER_BASE 0x40038000 -#define PNX4008_WDOG_BASE 0x4003C000 -#define PNX4008_DEBUG_BASE 0x40040000 -#define PNX4008_TOUCH1_BASE 0x40048000 -#define PNX4008_KEYSCAN_BASE 0x40050000 -#define PNX4008_UARTCTRL_BASE 0x40054000 -#define PNX4008_PWM_BASE 0x4005C000 -#define PNX4008_UART3_BASE 0x40080000 -#define PNX4008_UART4_BASE 0x40088000 -#define PNX4008_UART5_BASE 0x40090000 -#define PNX4008_UART6_BASE 0x40098000 -#define PNX4008_I2C1_BASE 0x400A0000 -#define PNX4008_I2C2_BASE 0x400A8000 -#define PNX4008_MAGICGATE_BASE 0x400B0000 -#define PNX4008_DUMCONF_BASE 0x400B8000 -#define PNX4008_DUM_MAINCFG_BASE 0x400BC000 -#define PNX4008_DSP_BASE 0x400C0000 -#define PNX4008_PROFCOUNTER_BASE 0x400C8000 -#define PNX4008_CRYPTO_BASE 0x400D0000 -#define PNX4008_CAMIFCONF_BASE 0x400D8000 -#define PNX4008_YUV2RGB_BASE 0x400E0000 -#define PNX4008_AUDIOCONFIG_BASE 0x400E8000 - -#endif diff --git a/include/asm-arm/arch-pnx4008/pm.h b/include/asm-arm/arch-pnx4008/pm.h deleted file mode 100644 index bac1634cb3e0..000000000000 --- a/include/asm-arm/arch-pnx4008/pm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/pm.h - * - * PNX4008 Power Management Routiness - header file - * - * Authors: Vitaly Wool, Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_ARCH_PNX4008_PM_H -#define __ASM_ARCH_PNX4008_PM_H - -#ifndef __ASSEMBLER__ -#include "irq.h" -#include "irqs.h" -#include "clock.h" - -extern void pnx4008_pm_idle(void); -extern void pnx4008_pm_suspend(void); -extern unsigned int pnx4008_cpu_suspend_sz; -extern void pnx4008_cpu_suspend(void); -extern unsigned int pnx4008_cpu_standby_sz; -extern void pnx4008_cpu_standby(void); - -extern int pnx4008_startup_pll(struct clk *); -extern int pnx4008_shutdown_pll(struct clk *); - -#endif /* ASSEMBLER */ -#endif /* __ASM_ARCH_PNX4008_PM_H */ diff --git a/include/asm-arm/arch-pnx4008/system.h b/include/asm-arm/arch-pnx4008/system.h deleted file mode 100644 index 17f9d7f9e5a1..000000000000 --- a/include/asm-arm/arch-pnx4008/system.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/system.h - * - * Copyright (C) 2003 Philips Semiconductors - * Copyright (C) 2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - cpu_reset(0); -} - -#endif diff --git a/include/asm-arm/arch-pnx4008/timex.h b/include/asm-arm/arch-pnx4008/timex.h deleted file mode 100644 index f22ee24a0219..000000000000 --- a/include/asm-arm/arch-pnx4008/timex.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/timex.h - * - * PNX4008 timers header file - * - * Author: Dmitry Chigirev - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PNX4008_TIMEX_H -#define __PNX4008_TIMEX_H - -#include -#include - -#define CLOCK_TICK_RATE 1000000 - -#define TICKS2USECS(x) (x) - -/* MilliSecond Timer - Chapter 21 Page 202 */ - -#define MSTIM_INT IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0)) -#define MSTIM_CTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4)) -#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8)) -#define MSTIM_MCTRL IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14)) -#define MSTIM_MATCH0 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18)) -#define MSTIM_MATCH1 IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c)) - -/* High Speed Timer - Chpater 22, Page 205 */ - -#define HSTIM_INT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0)) -#define HSTIM_CTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4)) -#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8)) -#define HSTIM_PMATCH IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC)) -#define HSTIM_PCOUNT IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10)) -#define HSTIM_MCTRL IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14)) -#define HSTIM_MATCH0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18)) -#define HSTIM_MATCH1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c)) -#define HSTIM_MATCH2 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20)) -#define HSTIM_CCR IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28)) -#define HSTIM_CR0 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C)) -#define HSTIM_CR1 IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30)) - -/* IMPORTANT: both timers are UPCOUNTING */ - -/* xSTIM_MCTRL bit definitions */ -#define MR0_INT 1 -#define RESET_COUNT0 (1<<1) -#define STOP_COUNT0 (1<<2) -#define MR1_INT (1<<3) -#define RESET_COUNT1 (1<<4) -#define STOP_COUNT1 (1<<5) -#define MR2_INT (1<<6) -#define RESET_COUNT2 (1<<7) -#define STOP_COUNT2 (1<<8) - -/* xSTIM_CTRL bit definitions */ -#define COUNT_ENAB 1 -#define RESET_COUNT (1<<1) -#define DEBUG_EN (1<<2) - -/* xSTIM_INT bit definitions */ -#define MATCH0_INT 1 -#define MATCH1_INT (1<<1) -#define MATCH2_INT (1<<2) -#define RTC_TICK0 (1<<4) -#define RTC_TICK1 (1<<5) - -#endif diff --git a/include/asm-arm/arch-pnx4008/uncompress.h b/include/asm-arm/arch-pnx4008/uncompress.h deleted file mode 100644 index 8fa4d24b72b4..000000000000 --- a/include/asm-arm/arch-pnx4008/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-pnx4008/uncompress.h - * - * Copyright (C) 1999 ARM Limited - * Copyright (C) 2006 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define UART5_BASE 0x40090000 - -#define UART5_DR (*(volatile unsigned char *) (UART5_BASE)) -#define UART5_FR (*(volatile unsigned char *) (UART5_BASE + 18)) - -static __inline__ void putc(char c) -{ - while (UART5_FR & (1 << 5)) - barrier(); - - UART5_DR = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pnx4008/vmalloc.h b/include/asm-arm/arch-pnx4008/vmalloc.h deleted file mode 100644 index 140d925f6f37..000000000000 --- a/include/asm-arm/arch-pnx4008/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-arm/arch-pnx4008/vmalloc.h - * - * Author: Vitaly Wool - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h deleted file mode 100644 index 5d8cc1d9cb10..000000000000 --- a/include/asm-arm/arch-pxa/akita.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Hardware specific definitions for SL-C1000 (Akita) - * - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* Akita IO Expander GPIOs */ - -#define AKITA_IOEXP_RESERVED_7 (1 << 7) -#define AKITA_IOEXP_IR_ON (1 << 6) -#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) -#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) -#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) -#define AKITA_IOEXP_MIC_BIAS (1 << 2) -#define AKITA_IOEXP_RESERVED_1 (1 << 1) -#define AKITA_IOEXP_RESERVED_0 (1 << 0) - -/* Direction Bitfield 0=output 1=input */ -#define AKITA_IOEXP_IO_DIR 0 -/* Default Values */ -#define AKITA_IOEXP_IO_OUT (AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP) - -extern struct platform_device akitaioexp_device; - -void akita_set_ioexp(struct device *dev, unsigned char bitmask); -void akita_reset_ioexp(struct device *dev, unsigned char bitmask); - diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h deleted file mode 100644 index f82f96dd1053..000000000000 --- a/include/asm-arm/arch-pxa/audio.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_ARCH_AUDIO_H__ -#define __ASM_ARCH_AUDIO_H__ - -#include -#include - -typedef struct { - int (*startup)(struct snd_pcm_substream *, void *); - void (*shutdown)(struct snd_pcm_substream *, void *); - void (*suspend)(void *); - void (*resume)(void *); - void *priv; -} pxa2xx_audio_ops_t; - -extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); - -#endif diff --git a/include/asm-arm/arch-pxa/bitfield.h b/include/asm-arm/arch-pxa/bitfield.h deleted file mode 100644 index f1f0e3387d9c..000000000000 --- a/include/asm-arm/arch-pxa/bitfield.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h deleted file mode 100644 index 39516ced8b1f..000000000000 --- a/include/asm-arm/arch-pxa/camera.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - camera.h - PXA camera driver header file - - Copyright (C) 2003, Intel Corporation - Copyright (C) 2008, Guennadi Liakhovetski - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#define PXA_CAMERA_MASTER 1 -#define PXA_CAMERA_DATAWIDTH_4 2 -#define PXA_CAMERA_DATAWIDTH_5 4 -#define PXA_CAMERA_DATAWIDTH_8 8 -#define PXA_CAMERA_DATAWIDTH_9 0x10 -#define PXA_CAMERA_DATAWIDTH_10 0x20 -#define PXA_CAMERA_PCLK_EN 0x40 -#define PXA_CAMERA_MCLK_EN 0x80 -#define PXA_CAMERA_PCP 0x100 -#define PXA_CAMERA_HSP 0x200 -#define PXA_CAMERA_VSP 0x400 - -struct pxacamera_platform_data { - int (*init)(struct device *); - int (*power)(struct device *, int); - int (*reset)(struct device *, int); - - unsigned long flags; - unsigned long mclk_10khz; -}; - -extern void pxa_set_camera_info(struct pxacamera_platform_data *); - -#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/asm-arm/arch-pxa/colibri.h b/include/asm-arm/arch-pxa/colibri.h deleted file mode 100644 index 2ae373fb5675..000000000000 --- a/include/asm-arm/arch-pxa/colibri.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _COLIBRI_H_ -#define _COLIBRI_H_ - -/* physical memory regions */ -#define COLIBRI_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define COLIBRI_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ -#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -/* virtual memory regions */ -#define COLIBRI_DISK_VIRT 0xF0000000 /* Disk On Chip region */ - -/* size of flash */ -#define COLIBRI_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ - -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 114 -#define COLIBRI_ETH_IRQ IRQ_GPIO(GPIO_DM9000) - -#endif /* _COLIBRI_H_ */ diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h deleted file mode 100644 index bf856503baf6..000000000000 --- a/include/asm-arm/arch-pxa/corgi.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Hardware specific definitions for SL-C7xx series of PDAs - * - * Copyright (c) 2004-2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_CORGI_H -#define __ASM_ARCH_CORGI_H 1 - - -/* - * Corgi (Non Standard) GPIO Definitions - */ -#define CORGI_GPIO_KEY_INT (0) /* Keyboard Interrupt */ -#define CORGI_GPIO_AC_IN (1) /* Charger Detection */ -#define CORGI_GPIO_WAKEUP (3) /* System wakeup notification? */ -#define CORGI_GPIO_AK_INT (4) /* Headphone Jack Control Interrupt */ -#define CORGI_GPIO_TP_INT (5) /* Touch Panel Interrupt */ -#define CORGI_GPIO_nSD_WP (7) /* SD Write Protect? */ -#define CORGI_GPIO_nSD_DETECT (9) /* MMC/SD Card Detect */ -#define CORGI_GPIO_nSD_INT (10) /* SD Interrupt for SDIO? */ -#define CORGI_GPIO_MAIN_BAT_LOW (11) /* Main Battery Low Notification */ -#define CORGI_GPIO_BAT_COVER (11) /* Battery Cover Detect */ -#define CORGI_GPIO_LED_ORANGE (13) /* Orange LED Control */ -#define CORGI_GPIO_CF_CD (14) /* Compact Flash Card Detect */ -#define CORGI_GPIO_CHRG_FULL (16) /* Charging Complete Notification */ -#define CORGI_GPIO_CF_IRQ (17) /* Compact Flash Interrupt */ -#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ -#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ -#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ -#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ -#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ -#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ -#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ -#define CORGI_GPIO_DISCHARGE_ON (42) /* Enable battery Discharge */ -#define CORGI_GPIO_CHRG_UKN (43) /* Unknown Charging (Bypass Control?) */ -#define CORGI_GPIO_HSYNC (44) /* LCD HSync Pulse */ -#define CORGI_GPIO_USB_PULLUP (45) /* USB show presence to host */ - - -/* - * Corgi Keyboard Definitions - */ -#define CORGI_KEY_STROBE_NUM (12) -#define CORGI_KEY_SENSE_NUM (8) -#define CORGI_GPIO_ALL_STROBE_BIT (0x00003ffc) -#define CORGI_GPIO_HIGH_SENSE_BIT (0xfc000000) -#define CORGI_GPIO_HIGH_SENSE_RSHIFT (26) -#define CORGI_GPIO_LOW_SENSE_BIT (0x00000003) -#define CORGI_GPIO_LOW_SENSE_LSHIFT (6) -#define CORGI_GPIO_STROBE_BIT(a) GPIO_bit(66+(a)) -#define CORGI_GPIO_SENSE_BIT(a) GPIO_bit(58+(a)) -#define CORGI_GAFR_ALL_STROBE_BIT (0x0ffffff0) -#define CORGI_GAFR_HIGH_SENSE_BIT (0xfff00000) -#define CORGI_GAFR_LOW_SENSE_BIT (0x0000000f) -#define CORGI_GPIO_KEY_SENSE(a) (58+(a)) -#define CORGI_GPIO_KEY_STROBE(a) (66+(a)) - - -/* - * Corgi Interrupts - */ -#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0) -#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3) -#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4) -#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10) -#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11) -#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */ -#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */ - - -/* - * Corgi SCOOP GPIOs and Config - */ -#define CORGI_SCP_LED_GREEN SCOOP_GPCR_PA11 -#define CORGI_SCP_SWA SCOOP_GPCR_PA12 /* Hinge Switch A */ -#define CORGI_SCP_SWB SCOOP_GPCR_PA13 /* Hinge Switch B */ -#define CORGI_SCP_MUTE_L SCOOP_GPCR_PA14 -#define CORGI_SCP_MUTE_R SCOOP_GPCR_PA15 -#define CORGI_SCP_AKIN_PULLUP SCOOP_GPCR_PA16 -#define CORGI_SCP_APM_ON SCOOP_GPCR_PA17 -#define CORGI_SCP_BACKLIGHT_CONT SCOOP_GPCR_PA18 -#define CORGI_SCP_MIC_BIAS SCOOP_GPCR_PA19 - -#define CORGI_SCOOP_IO_DIR ( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \ - CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \ - CORGI_SCP_MIC_BIAS ) -#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R ) - - -/* - * Shared data structures - */ -extern struct platform_device corgiscoop_device; -extern struct platform_device corgissp_device; - -#endif /* __ASM_ARCH_CORGI_H */ - diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S deleted file mode 100644 index 9012cbc0ad8b..000000000000 --- a/include/asm-arm/arch-pxa/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-pxa/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include "hardware.h" - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x40000000 @ physical - movne \rx, #io_p2v(0x40000000) @ virtual - orr \rx, \rx, #0x00100000 - .endm - -#define UART_SHIFT 2 -#include diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h deleted file mode 100644 index dbe110ee2666..000000000000 --- a/include/asm-arm/arch-pxa/dma.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/dma.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef struct pxa_dma_desc { - volatile u32 ddadr; /* Points to the next descriptor + flags */ - volatile u32 dsadr; /* DSADR value for the current transfer */ - volatile u32 dtadr; /* DTADR value for the current transfer */ - volatile u32 dcmd; /* DCMD value for the current transfer */ -} pxa_dma_desc; - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define HAVE_ARCH_PCI_SET_DMA_MASK 1 -#endif - -/* - * DMA registration - */ - -int __init pxa_init_dma(int num_ch); - -int pxa_request_dma (char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data); - -void pxa_free_dma (int dma_ch); - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S deleted file mode 100644 index 897d164da223..000000000000 --- a/include/asm-arm/arch-pxa/entry-macro.S +++ /dev/null @@ -1,57 +0,0 @@ -/* - * include/asm-arm/arch-pxa/entry-macro.S - * - * Low-level IRQ helper macros for PXA-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mrc p15, 0, \tmp, c0, c0, 0 @ CPUID - mov \tmp, \tmp, lsr #13 - and \tmp, \tmp, #0x7 @ Core G - cmp \tmp, #1 - bhi 1004f - - mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000 - add \base, \base, #0x00d00000 - ldr \irqstat, [\base, #0] @ ICIP - ldr \irqnr, [\base, #4] @ ICMR - b 1002f - -1004: - mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 - mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 - ands \irqnr, \irqstat, \irqnr - beq 1003f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 - add \irqnr, \irqnr, #32 - b 1001f -1003: - mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP - mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR -1002: - ands \irqnr, \irqstat, \irqnr - beq 1001f - rsb \irqstat, \irqnr, #0 - and \irqstat, \irqstat, \irqnr - clz \irqnr, \irqstat - rsb \irqnr, \irqnr, #31 -1001: - .endm diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/include/asm-arm/arch-pxa/eseries-gpio.h deleted file mode 100644 index 4c90b1310270..000000000000 --- a/include/asm-arm/arch-pxa/eseries-gpio.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * eseries-gpio.h - * - * Copyright (C) Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/* e-series power button */ -#define GPIO_ESERIES_POWERBTN 0 - -/* UDC GPIO definitions */ -#define GPIO_E7XX_USB_DISC 13 -#define GPIO_E7XX_USB_PULLUP 3 - -#define GPIO_E800_USB_DISC 4 -#define GPIO_E800_USB_PULLUP 84 - -/* e740 PCMCIA GPIO definitions */ -/* Note: PWR1 seems to be inverted */ -#define GPIO_E740_PCMCIA_CD0 8 -#define GPIO_E740_PCMCIA_CD1 44 -#define GPIO_E740_PCMCIA_RDY0 11 -#define GPIO_E740_PCMCIA_RDY1 6 -#define GPIO_E740_PCMCIA_RST0 27 -#define GPIO_E740_PCMCIA_RST1 24 -#define GPIO_E740_PCMCIA_PWR0 20 -#define GPIO_E740_PCMCIA_PWR1 23 - -/* e750 PCMCIA GPIO definitions */ -#define GPIO_E750_PCMCIA_CD0 8 -#define GPIO_E750_PCMCIA_RDY0 12 -#define GPIO_E750_PCMCIA_RST0 27 -#define GPIO_E750_PCMCIA_PWR0 20 - -/* e800 PCMCIA GPIO definitions */ -#define GPIO_E800_PCMCIA_RST0 69 -#define GPIO_E800_PCMCIA_RST1 72 -#define GPIO_E800_PCMCIA_PWR0 20 -#define GPIO_E800_PCMCIA_PWR1 73 - -/* e7xx IrDA power control */ -#define GPIO_E7XX_IR_ON 38 - -/* ASIC related GPIOs */ -#define GPIO_ESERIES_TMIO_IRQ 5 -#define GPIO_E800_ANGELX_IRQ 8 diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/include/asm-arm/arch-pxa/eseries-irq.h deleted file mode 100644 index f2a93d5e31d3..000000000000 --- a/include/asm-arm/arch-pxa/eseries-irq.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * eseries-irq.h - * - * Copyright (C) Ian Molton - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) -#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n)) - -#define ANGELX_RDY0_IRQ IRQ_ANGELX(0) -#define ANGELX_ST0_IRQ IRQ_ANGELX(1) -#define ANGELX_CD0_IRQ IRQ_ANGELX(2) -#define ANGELX_RDY1_IRQ IRQ_ANGELX(3) -#define ANGELX_ST1_IRQ IRQ_ANGELX(4) -#define ANGELX_CD1_IRQ IRQ_ANGELX(5) - -#define TMIO_IRQ_BASE (IRQ_BOARD_START+0) -#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n)) - -#define TMIO_SD_IRQ IRQ_TMIO(1) -#define TMIO_USB_IRQ IRQ_TMIO(2) - diff --git a/include/asm-arm/arch-pxa/gpio.h b/include/asm-arm/arch-pxa/gpio.h deleted file mode 100644 index 2c1e3d8ad7a2..000000000000 --- a/include/asm-arm/arch-pxa/gpio.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/gpio.h - * - * PXA GPIO wrappers for arch-neutral GPIO calls - * - * Written by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_PXA_GPIO_H -#define __ASM_ARCH_PXA_GPIO_H - -#include -#include -#include - -#include - - -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). - * Those cases currently cause holes in the GPIO number space. - */ -#define NR_BUILTIN_GPIO 128 - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) - return GPLR(gpio) & GPIO_bit(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) { - if (value) - GPSR(gpio) = GPIO_bit(gpio); - else - GPCR(gpio) = GPIO_bit(gpio); - } else { - __gpio_set_value(gpio, value); - } -} - -#define gpio_cansleep __gpio_cansleep - -#define gpio_to_irq(gpio) IRQ_GPIO(gpio) -#define irq_to_gpio(irq) IRQ_TO_GPIO(irq) - - -#endif diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h deleted file mode 100644 index 6fa85c4f94f8..000000000000 --- a/include/asm-arm/arch-pxa/gumstix.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/gumstix.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* BTRESET - Reset line to Bluetooth module, active low signal. */ -#define GPIO_GUMSTIX_BTRESET 7 -#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) - - -/* -GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the original gumstix, -this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, -this moves to GPIO17 and GPIO37. */ - -/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn -has detected a cable insertion; driven low otherwise. */ - -#ifdef CONFIG_ARCH_GUMSTIX_ORIG - -#define GPIO_GUMSTIX_USB_GPIOn 81 -#define GPIO_GUMSTIX_USB_GPIOx 83 - -#else - -#define GPIO_GUMSTIX_USB_GPIOn 35 -#define GPIO_GUMSTIX_USB_GPIOx 41 - -#endif - -/* usb state change */ -#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) - -#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) -#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) -#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) - -/* - * SD/MMC definitions - */ -#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ -#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) - -/* - * SMC Ethernet definitions - * ETH_RST provides a hardware reset line to the ethernet chip - * ETH is the IRQ line in from the ethernet chip to the PXA - */ -#define GPIO_GUMSTIX_ETH0_RST 80 -#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) -#define GPIO_GUMSTIX_ETH1_RST 52 -#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) - -#define GPIO_GUMSTIX_ETH0 36 -#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) -#define GPIO_GUMSTIX_ETH1 27 -#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) - - -/* CF reset line */ -#define GPIO8_RESET 8 - -/* CF slot 0 */ -#define GPIO4_nBVD1 4 -#define GPIO4_nSTSCHG GPIO4_nBVD1 -#define GPIO11_nCD 11 -#define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) - -/* CF slot 1 */ -#define GPIO18_nBVD1 18 -#define GPIO18_nSTSCHG GPIO18_nBVD1 -#define GPIO36_nCD 36 -#define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) - -/* CF GPIO line modes */ -#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) -#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) -#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) -#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) -#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) -#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) -#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h deleted file mode 100644 index 979a45695d7d..000000000000 --- a/include/asm-arm/arch-pxa/hardware.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/hardware.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -/* - * We requires absolute addresses. - */ -#define PCIO_BASE 0 - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xff000000 -#define UNCACHED_ADDR UNCACHED_PHYS_0 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) - -#ifndef __ASSEMBLY__ - -# define __REG(x) (*((volatile u32 *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 *)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PXA25x -#define __cpu_is_pxa21x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xf3f; \ - _id == 0x212; \ - }) - -#define __cpu_is_pxa255(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0; \ - }) - -#define __cpu_is_pxa25x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x2d0 || _id == 0x290; \ - }) -#else -#define __cpu_is_pxa21x(id) (0) -#define __cpu_is_pxa255(id) (0) -#define __cpu_is_pxa25x(id) (0) -#endif - -#ifdef CONFIG_PXA27x -#define __cpu_is_pxa27x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x411; \ - }) -#else -#define __cpu_is_pxa27x(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA300 -#define __cpu_is_pxa300(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x688; \ - }) -#else -#define __cpu_is_pxa300(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA310 -#define __cpu_is_pxa310(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x689; \ - }) -#else -#define __cpu_is_pxa310(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA320 -#define __cpu_is_pxa320(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x603 || _id == 0x682; \ - }) -#else -#define __cpu_is_pxa320(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA930 -#define __cpu_is_pxa930(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x683; \ - }) -#else -#define __cpu_is_pxa930(id) (0) -#endif - -#define cpu_is_pxa21x() \ - ({ \ - __cpu_is_pxa21x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa255() \ - ({ \ - __cpu_is_pxa255(read_cpuid_id()); \ - }) - -#define cpu_is_pxa25x() \ - ({ \ - __cpu_is_pxa25x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa27x() \ - ({ \ - __cpu_is_pxa27x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa300() \ - ({ \ - __cpu_is_pxa300(read_cpuid_id()); \ - }) - -#define cpu_is_pxa310() \ - ({ \ - __cpu_is_pxa310(read_cpuid_id()); \ - }) - -#define cpu_is_pxa320() \ - ({ \ - __cpu_is_pxa320(read_cpuid_id()); \ - }) - -#define cpu_is_pxa930() \ - ({ \ - unsigned int id = read_cpuid(CPUID_ID); \ - __cpu_is_pxa930(id); \ - }) - -/* - * CPUID Core Generation Bit - * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x - * == 0x3 for pxa300/pxa310/pxa320 - */ -#define __cpu_is_pxa2xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id <= 0x2; \ - }) - -#define __cpu_is_pxa3xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id == 0x3; \ - }) - -#define cpu_is_pxa2xx() \ - ({ \ - __cpu_is_pxa2xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa3xx() \ - ({ \ - __cpu_is_pxa3xx(read_cpuid_id()); \ - }) - -/* - * Handy routine to set GPIO alternate functions - */ -extern int pxa_gpio_mode( int gpio_mode ); - -/* - * Return GPIO level, nonzero means high, zero is low - */ -extern int pxa_gpio_get_value(unsigned gpio); - -/* - * Set output GPIO level - */ -extern void pxa_gpio_set_value(unsigned gpio, int value); - -/* - * return current memory and LCD clock frequency in units of 10kHz - */ -extern unsigned int get_memclk_frequency_10khz(void); - -/* - * register GPIO as reset generator - */ -extern int init_gpio_reset(int gpio); - -#endif - -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 -#define pcibios_assign_all_busses() 1 -#endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h deleted file mode 100644 index 80596b013443..000000000000 --- a/include/asm-arm/arch-pxa/i2c.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * i2c_pxa.h - * - * Copyright (C) 2002 Intrinsyc Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _I2C_PXA_H_ -#define _I2C_PXA_H_ - -#if 0 -#define DEF_TIMEOUT 3 -#else -/* need a longer timeout if we're dealing with the fact we may well be - * looking at a multi-master environment -*/ -#define DEF_TIMEOUT 32 -#endif - -#define BUS_ERROR (-EREMOTEIO) -#define XFER_NAKED (-ECONNREFUSED) -#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ - -/* ICR initialize bit values -* -* 15. FM 0 (100 Khz operation) -* 14. UR 0 (No unit reset) -* 13. SADIE 0 (Disables the unit from interrupting on slave addresses -* matching its slave address) -* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration -* in master mode) -* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) -* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) -* 9. IRFIE 1 (Enable interrupts from full buffer received) -* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) -* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) -* 6. IUE 0 (Disable unit until we change settings) -* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) -* 4. MA 0 (Only send stop with the ICR stop bit) -* 3. TB 0 (We are not transmitting a byte initially) -* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) -* 1. STOP 0 (Do not send a STOP) -* 0. START 0 (Do not send a START) -* -*/ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) - -/* I2C status register init values - * - * 10. BED 1 (Clear bus error detected) - * 9. SAD 1 (Clear slave address detected) - * 7. IRF 1 (Clear IDBR Receive Full) - * 6. ITE 1 (Clear IDBR Transmit Empty) - * 5. ALD 1 (Clear Arbitration Loss Detected) - * 4. SSD 1 (Clear Slave Stop Detected) - */ -#define I2C_ISR_INIT 0x7FF /* status register init */ - -struct i2c_slave_client; - -struct i2c_pxa_platform_data { - unsigned int slave_addr; - struct i2c_slave_client *slave; - unsigned int class; - int use_pio; -}; - -extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); - -#ifdef CONFIG_PXA27x -extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info); -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h deleted file mode 100644 index 21aa8ac35c1c..000000000000 --- a/include/asm-arm/arch-pxa/idp.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/idp.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc. - * - * 2001-09-13: Cliff Brake - * Initial code - * - * 2005-02-15: Cliff Brake - * - * Changes for 2.6 kernel. - */ - - -/* - * Note: this file must be safe to include in assembly files - * - * Support for the Vibren PXA255 IDP requires rev04 or later - * IDP hardware. - */ - - -#define IDP_FLASH_PHYS (PXA_CS0_PHYS) -#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) -#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS) -#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000) -#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000) -#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000) -#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000) - - -/* - * virtual memory map - */ - -#define IDP_COREVOLT_VIRT (0xf0000000) -#define IDP_COREVOLT_SIZE (1*1024*1024) - -#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE) -#define IDP_CPLD_SIZE (1*1024*1024) - -#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000 -#error Your custom IO space is getting a bit large !! -#endif - -#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT) -#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS) - -#ifndef __ASSEMBLY__ -# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) -#else -# define __CPLD_REG(x) CPLD_P2V(x) -#endif - -/* board level registers in the CPLD: (offsets from CPLD_VIRT) */ - -#define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00) -#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) -#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x08) -#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C) -#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10) -#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14) -#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18) -#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C) -#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20) -#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24) -#define _IDP_CPLD_PCCARD_PWR (IDP_CPLD_PHYS + 0x28) -#define _IDP_CPLD_MISC_CTRL (IDP_CPLD_PHYS + 0x2C) -#define _IDP_CPLD_LCD (IDP_CPLD_PHYS + 0x30) -#define _IDP_CPLD_FLASH_WE (IDP_CPLD_PHYS + 0x34) - -#define _IDP_CPLD_KB_ROW (IDP_CPLD_PHYS + 0x50) -#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x54) -#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x58) -#define _IDP_CPLD_MISC_STATUS (IDP_CPLD_PHYS + 0x5C) - -/* FPGA register virtual addresses */ - -#define IDP_CPLD_REV __CPLD_REG(_IDP_CPLD_REV) -#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR) -#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL) -#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH) -#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW) -#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN) -#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR) -#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE) -#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR) -#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE) -#define IDP_CPLD_PCCARD_PWR __CPLD_REG(_IDP_CPLD_PCCARD_PWR) -#define IDP_CPLD_MISC_CTRL __CPLD_REG(_IDP_CPLD_MISC_CTRL) -#define IDP_CPLD_LCD __CPLD_REG(_IDP_CPLD_LCD) -#define IDP_CPLD_FLASH_WE __CPLD_REG(_IDP_CPLD_FLASH_WE) - -#define IDP_CPLD_KB_ROW __CPLD_REG(_IDP_CPLD_KB_ROW) -#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS) -#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS) -#define IDP_CPLD_MISC_STATUS __CPLD_REG(_IDP_CPLD_MISC_STATUS) - - -/* - * Bit masks for various registers - */ - -// IDP_CPLD_PCCARD_PWR -#define PCC0_PWR0 (1 << 0) -#define PCC0_PWR1 (1 << 1) -#define PCC0_PWR2 (1 << 2) -#define PCC0_PWR3 (1 << 3) -#define PCC1_PWR0 (1 << 4) -#define PCC1_PWR1 (1 << 5) -#define PCC1_PWR2 (1 << 6) -#define PCC1_PWR3 (1 << 7) - -// IDP_CPLD_PCCARD_EN -#define PCC0_RESET (1 << 6) -#define PCC1_RESET (1 << 7) -#define PCC0_ENABLE (1 << 0) -#define PCC1_ENABLE (1 << 1) - -// IDP_CPLD_PCCARDx_STATUS -#define _PCC_WRPROT (1 << 7) // 7-4 read as low true -#define _PCC_RESET (1 << 6) -#define _PCC_IRQ (1 << 5) -#define _PCC_INPACK (1 << 4) -#define PCC_BVD2 (1 << 3) -#define PCC_BVD1 (1 << 2) -#define PCC_VS2 (1 << 1) -#define PCC_VS1 (1 << 0) - -#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) - -/* A listing of interrupts used by external hardware devices */ - -#define TOUCH_PANEL_IRQ IRQ_GPIO(5) -#define IDE_IRQ IRQ_GPIO(21) - -#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING - -#define ETHERNET_IRQ IRQ_GPIO(4) -#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) -#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH - -#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) -#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH - -#define PCMCIA_S0_RDYINT IRQ_GPIO(19) -#define PCMCIA_S1_RDYINT IRQ_GPIO(22) - - -/* - * Macros for LED Driver - */ - -/* leds 0 = ON */ -#define IDP_HB_LED (1<<5) -#define IDP_BUSY_LED (1<<6) - -#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) - -/* - * macros for MTD driver - */ - -#define FLASH_WRITE_PROTECT_DISABLE() ((IDP_CPLD_FLASH_WE) &= ~(0x1)) -#define FLASH_WRITE_PROTECT_ENABLE() ((IDP_CPLD_FLASH_WE) |= (0x1)) - -/* - * macros for matrix keyboard driver - */ - -#define KEYBD_MATRIX_NUMBER_INPUTS 7 -#define KEYBD_MATRIX_NUMBER_OUTPUTS 14 - -#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC FALSE -#define KEYBD_MATRIX_INVERT_INPUT_LOGIC FALSE - -#define KEYBD_MATRIX_SETTLING_TIME_US 100 -#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT 2 - -#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \ -{\ - IDP_CPLD_KB_COL_LOW = outputs;\ - IDP_CPLD_KB_COL_HIGH = outputs >> 7;\ -} - -#define KEYBD_MATRIX_GET_INPUTS(inputs) \ -{\ - inputs = (IDP_CPLD_KB_ROW & 0x7f);\ -} - - diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h deleted file mode 100644 index af34e0f2f7dc..000000000000 --- a/include/asm-arm/arch-pxa/io.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/io.h - * - * Copied from asm/arch/sa1100/io.h - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) ((void __iomem *)(a)) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h deleted file mode 100644 index 0a50c3c763df..000000000000 --- a/include/asm-arm/arch-pxa/irda.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_OFF 1 -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 - -struct pxaficp_platform_data { - int transceiver_cap; - void (*transceiver_mode)(struct device *dev, int mode); - int (*startup)(struct device *dev); - void (*shutdown)(struct device *dev); -}; - -extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); - -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -void pxa2xx_transceiver_mode(struct device *dev, int mode); -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h deleted file mode 100644 index 9413121b0ed9..000000000000 --- a/include/asm-arm/arch-pxa/irqs.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/irqs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#define PXA_IRQ(x) (x) - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ -#define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ -#define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ -#define IRQ_USBH1 PXA_IRQ(3) /* USB Host interrupt 2 (non-OHCI) */ -#define IRQ_KEYPAD PXA_IRQ(4) /* Key pad controller */ -#define IRQ_MEMSTK PXA_IRQ(5) /* Memory Stick interrupt */ -#define IRQ_PWRI2C PXA_IRQ(6) /* Power I2C interrupt */ -#endif - -#define IRQ_HWUART PXA_IRQ(7) /* HWUART Transmit/Receive/Error (PXA26x) */ -#define IRQ_OST_4_11 PXA_IRQ(7) /* OS timer 4-11 matches (PXA27x) */ -#define IRQ_GPIO0 PXA_IRQ(8) /* GPIO0 Edge Detect */ -#define IRQ_GPIO1 PXA_IRQ(9) /* GPIO1 Edge Detect */ -#define IRQ_GPIO_2_x PXA_IRQ(10) /* GPIO[2-x] Edge Detect */ -#define IRQ_USB PXA_IRQ(11) /* USB Service */ -#define IRQ_PMU PXA_IRQ(12) /* Performance Monitoring Unit */ -#define IRQ_I2S PXA_IRQ(13) /* I2S Interrupt */ -#define IRQ_AC97 PXA_IRQ(14) /* AC97 Interrupt */ -#define IRQ_ASSP PXA_IRQ(15) /* Audio SSP Service Request (PXA25x) */ -#define IRQ_USIM PXA_IRQ(15) /* Smart Card interface interrupt (PXA27x) */ -#define IRQ_NSSP PXA_IRQ(16) /* Network SSP Service Request (PXA25x) */ -#define IRQ_SSP2 PXA_IRQ(16) /* SSP2 interrupt (PXA27x) */ -#define IRQ_LCD PXA_IRQ(17) /* LCD Controller Service Request */ -#define IRQ_I2C PXA_IRQ(18) /* I2C Service Request */ -#define IRQ_ICP PXA_IRQ(19) /* ICP Transmit/Receive/Error */ -#define IRQ_STUART PXA_IRQ(20) /* STUART Transmit/Receive/Error */ -#define IRQ_BTUART PXA_IRQ(21) /* BTUART Transmit/Receive/Error */ -#define IRQ_FFUART PXA_IRQ(22) /* FFUART Transmit/Receive/Error*/ -#define IRQ_MMC PXA_IRQ(23) /* MMC Status/Error Detection */ -#define IRQ_SSP PXA_IRQ(24) /* SSP Service Request */ -#define IRQ_DMA PXA_IRQ(25) /* DMA Channel Service Request */ -#define IRQ_OST0 PXA_IRQ(26) /* OS Timer match 0 */ -#define IRQ_OST1 PXA_IRQ(27) /* OS Timer match 1 */ -#define IRQ_OST2 PXA_IRQ(28) /* OS Timer match 2 */ -#define IRQ_OST3 PXA_IRQ(29) /* OS Timer match 3 */ -#define IRQ_RTC1Hz PXA_IRQ(30) /* RTC HZ Clock Tick */ -#define IRQ_RTCAlrm PXA_IRQ(31) /* RTC Alarm */ - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define IRQ_TPM PXA_IRQ(32) /* TPM interrupt */ -#define IRQ_CAMERA PXA_IRQ(33) /* Camera Interface */ -#endif - -#ifdef CONFIG_PXA3xx -#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */ -#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */ -#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */ -#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */ -#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */ -#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */ -#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */ -#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */ -#define IRQ_USB2 PXA_IRQ(46) /* USB 2.0 Device Controller */ -#define IRQ_WAKEUP0 PXA_IRQ(49) /* EXT_WAKEUP0 */ -#define IRQ_WAKEUP1 PXA_IRQ(50) /* EXT_WAKEUP1 */ -#define IRQ_DMEMC PXA_IRQ(51) /* Dynamic Memory Controller */ -#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */ -#endif - -#define PXA_GPIO_IRQ_BASE (64) -#define PXA_GPIO_IRQ_NUM (128) - -#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x)) -#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x)) - -#define IRQ_TO_GPIO_2_x(i) ((i) - PXA_GPIO_IRQ_BASE) -#define IRQ_TO_GPIO(i) (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i)) - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. - */ -#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) -#define IRQ_BOARD_END (IRQ_BOARD_START + 16) - -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) -#elif defined(CONFIG_ARCH_LUBBOCK) || \ - defined(CONFIG_MACH_LOGICPD_PXA270) || \ - defined(CONFIG_MACH_TOSA) || \ - defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) || \ - defined(CONFIG_MACH_MAGICIAN) -#define NR_IRQS (IRQ_BOARD_END) -#elif defined(CONFIG_MACH_ZYLONITE) -#define NR_IRQS (IRQ_BOARD_START + 32) -#else -#define NR_IRQS (IRQ_BOARD_START) -#endif - -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x)) -#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0) -#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1) -#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */ -#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3) -#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4) -#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5) -#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ -#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) - -#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) -#define LPD270_USBC_IRQ LPD270_IRQ(2) -#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) -#define LPD270_AC97_IRQ LPD270_IRQ(4) - -#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) -#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) -#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) -#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2) -#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3) -#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4) -#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5) -#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6) -#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7) -#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9) -#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10) -#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11) -#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13) -#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) -#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - -/* phyCORE-PXA270 (PCM027) Interrupts */ -#define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) -#define PCM027_BTDET_IRQ PCM027_IRQ(0) -#define PCM027_FF_RI_IRQ PCM027_IRQ(1) -#define PCM027_MMCDET_IRQ PCM027_IRQ(2) -#define PCM027_PM_5V_IRQ PCM027_IRQ(3) - -/* ITE8152 irqs */ -/* add IT8152 IRQs beyond BOARD_END */ -#ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) - -/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ -#define IT8152_LD_IRQ_COUNT 9 -#define IT8152_LP_IRQ_COUNT 16 -#define IT8152_PD_IRQ_COUNT 15 - -/* Priorities: */ -#define IT8152_PD_IRQ(i) IT8152_IRQ(i) -#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) -#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) - -#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) - -#if NR_IRQS < (IT8152_LAST_IRQ+1) -#undef NR_IRQS -#define NR_IRQS (IT8152_LAST_IRQ+1) -#endif - -#endif /* CONFIG_PCI_HOST_ITE8152 */ diff --git a/include/asm-arm/arch-pxa/littleton.h b/include/asm-arm/arch-pxa/littleton.h deleted file mode 100644 index 79d209b826f4..000000000000 --- a/include/asm-arm/arch-pxa/littleton.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARCH_ZYLONITE_H -#define __ASM_ARCH_ZYLONITE_H - -#define LITTLETON_ETH_PHYS 0x30000000 - -#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h deleted file mode 100644 index 501d240ac120..000000000000 --- a/include/asm-arm/arch-pxa/lpd270.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-arm/arch-pxa/lpd270.h - * - * Author: Lennert Buytenhek - * Created: Feb 10, 2006 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_LPD270_H -#define __ASM_ARCH_LPD270_H - -#define LPD270_CPLD_PHYS PXA_CS2_PHYS -#define LPD270_CPLD_VIRT 0xf0000000 -#define LPD270_CPLD_SIZE 0x00100000 - -#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) - -/* CPLD registers */ -#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) -#define LPD270_CONTROL LPD270_CPLD_REG(0x00) -#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) -#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) -#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) -#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) -#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) -#define LPD270_EGPIO LPD270_CPLD_REG(0x30) -#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) -#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) - -#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ -#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ -#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ - - -#endif diff --git a/include/asm-arm/arch-pxa/lubbock.h b/include/asm-arm/arch-pxa/lubbock.h deleted file mode 100644 index 11ee73593fc3..000000000000 --- a/include/asm-arm/arch-pxa/lubbock.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/lubbock.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define LUBBOCK_ETH_PHYS PXA_CS3_PHYS - -#define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS -#define LUBBOCK_FPGA_VIRT (0xf0000000) -#define LUB_P2V(x) ((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT) -#define LUB_V2P(x) ((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS) - -#ifndef __ASSEMBLY__ -# define __LUB_REG(x) (*((volatile unsigned long *)LUB_P2V(x))) -#else -# define __LUB_REG(x) LUB_P2V(x) -#endif - -/* FPGA register virtual addresses */ -#define LUB_WHOAMI __LUB_REG(LUBBOCK_FPGA_PHYS + 0x000) -#define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010) -#define LUB_DISC_BLNK_LED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x040) -#define LUB_CONF_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x050) -#define LUB_USER_SWITCHES __LUB_REG(LUBBOCK_FPGA_PHYS + 0x060) -#define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080) -#define LUB_MISC_RD __LUB_REG(LUBBOCK_FPGA_PHYS + 0x090) -#define LUB_IRQ_MASK_EN __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0) -#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0) -#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100) - -#ifndef __ASSEMBLY__ -extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); -#endif diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h deleted file mode 100644 index 169b374f9921..000000000000 --- a/include/asm-arm/arch-pxa/magician.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * GPIO and IRQ definitions for HTC Magician PDA phones - * - * Copyright (c) 2007 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _MAGICIAN_H_ -#define _MAGICIAN_H_ - -#include - -/* - * PXA GPIOs - */ - -#define GPIO0_MAGICIAN_KEY_POWER 0 -#define GPIO9_MAGICIAN_UNKNOWN 9 -#define GPIO10_MAGICIAN_GSM_IRQ 10 -#define GPIO11_MAGICIAN_GSM_OUT1 11 -#define GPIO13_MAGICIAN_CPLD_IRQ 13 -#define GPIO18_MAGICIAN_UNKNOWN 18 -#define GPIO22_MAGICIAN_VIBRA_EN 22 -#define GPIO26_MAGICIAN_GSM_POWER 26 -#define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 -#define GPIO37_MAGICIAN_KEY_HANGUP 37 -#define GPIO38_MAGICIAN_KEY_CONTACTS 38 -#define GPIO40_MAGICIAN_GSM_OUT2 40 -#define GPIO48_MAGICIAN_UNKNOWN 48 -#define GPIO56_MAGICIAN_UNKNOWN 56 -#define GPIO57_MAGICIAN_CAM_RESET 57 -#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 -#define GPIO83_MAGICIAN_nIR_EN 83 -#define GPIO86_MAGICIAN_GSM_RESET 86 -#define GPIO87_MAGICIAN_GSM_SELECT 87 -#define GPIO90_MAGICIAN_KEY_CALENDAR 90 -#define GPIO91_MAGICIAN_KEY_CAMERA 91 -#define GPIO93_MAGICIAN_KEY_UP 93 -#define GPIO94_MAGICIAN_KEY_DOWN 94 -#define GPIO95_MAGICIAN_KEY_LEFT 95 -#define GPIO96_MAGICIAN_KEY_RIGHT 96 -#define GPIO97_MAGICIAN_KEY_ENTER 97 -#define GPIO98_MAGICIAN_KEY_RECORD 98 -#define GPIO99_MAGICIAN_HEADPHONE_IN 99 -#define GPIO100_MAGICIAN_KEY_VOL_UP 100 -#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101 -#define GPIO102_MAGICIAN_KEY_PHONE 102 -#define GPIO103_MAGICIAN_LED_KP 103 -#define GPIO104_MAGICIAN_LCD_POWER_1 104 -#define GPIO105_MAGICIAN_LCD_POWER_2 105 -#define GPIO106_MAGICIAN_LCD_POWER_3 106 -#define GPIO107_MAGICIAN_DS1WM_IRQ 107 -#define GPIO108_MAGICIAN_GSM_READY 108 -#define GPIO114_MAGICIAN_UNKNOWN 114 -#define GPIO115_MAGICIAN_nPEN_IRQ 115 -#define GPIO116_MAGICIAN_nCAM_EN 116 -#define GPIO119_MAGICIAN_UNKNOWN 119 -#define GPIO120_MAGICIAN_UNKNOWN 120 - -/* - * CPLD IRQs - */ - -#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) -#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) -#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) -#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) - -/* - * CPLD EGPIOs - */ - -#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ -#define MAGICIAN_EGPIO(reg,bit) \ - (MAGICIAN_EGPIO_BASE + 8*reg + bit) - -/* output */ - -#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) -#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) -#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) -#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) -#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) -#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) -#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) -#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) -#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) -#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) -#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) -#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) -#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) -#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) -#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) -#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) -#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) -#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) - -/* input */ - -#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) -#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) - -#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) -#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) -#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) -#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) -#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) - -#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) - -#endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mainstone.h b/include/asm-arm/arch-pxa/mainstone.h deleted file mode 100644 index 14c862adcaa1..000000000000 --- a/include/asm-arm/arch-pxa/mainstone.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mainstone.h - * - * Author: Nicolas Pitre - * Created: Nov 14, 2002 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef ASM_ARCH_MAINSTONE_H -#define ASM_ARCH_MAINSTONE_H - -#define MST_ETH_PHYS PXA_CS4_PHYS - -#define MST_FPGA_PHYS PXA_CS2_PHYS -#define MST_FPGA_VIRT (0xf0000000) -#define MST_P2V(x) ((x) - MST_FPGA_PHYS + MST_FPGA_VIRT) -#define MST_V2P(x) ((x) - MST_FPGA_VIRT + MST_FPGA_PHYS) - -#ifndef __ASSEMBLY__ -# define __MST_REG(x) (*((volatile unsigned long *)MST_P2V(x))) -#else -# define __MST_REG(x) MST_P2V(x) -#endif - -/* board level registers in the FPGA */ - -#define MST_LEDDAT1 __MST_REG(0x08000010) -#define MST_LEDDAT2 __MST_REG(0x08000014) -#define MST_LEDCTRL __MST_REG(0x08000040) -#define MST_GPSWR __MST_REG(0x08000060) -#define MST_MSCWR1 __MST_REG(0x08000080) -#define MST_MSCWR2 __MST_REG(0x08000084) -#define MST_MSCWR3 __MST_REG(0x08000088) -#define MST_MSCRD __MST_REG(0x08000090) -#define MST_INTMSKENA __MST_REG(0x080000c0) -#define MST_INTSETCLR __MST_REG(0x080000d0) -#define MST_PCMCIA0 __MST_REG(0x080000e0) -#define MST_PCMCIA1 __MST_REG(0x080000e4) - -#define MST_MSCWR1_CAMERA_ON (1 << 15) /* Camera interface power control */ -#define MST_MSCWR1_CAMERA_SEL (1 << 14) /* Camera interface mux control */ -#define MST_MSCWR1_LCD_CTL (1 << 13) /* General-purpose LCD control */ -#define MST_MSCWR1_MS_ON (1 << 12) /* Memory Stick power control */ -#define MST_MSCWR1_MMC_ON (1 << 11) /* MultiMediaCard* power control */ -#define MST_MSCWR1_MS_SEL (1 << 10) /* SD/MS multiplexer control */ -#define MST_MSCWR1_BB_SEL (1 << 9) /* PCMCIA/Baseband multiplexer */ -#define MST_MSCWR1_BT_ON (1 << 8) /* Bluetooth UART transceiver */ -#define MST_MSCWR1_BTDTR (1 << 7) /* Bluetooth UART DTR */ - -#define MST_MSCWR1_IRDA_MASK (3 << 5) /* IrDA transceiver mode */ -#define MST_MSCWR1_IRDA_FULL (0 << 5) /* full distance power */ -#define MST_MSCWR1_IRDA_OFF (1 << 5) /* shutdown */ -#define MST_MSCWR1_IRDA_MED (2 << 5) /* 2/3 distance power */ -#define MST_MSCWR1_IRDA_LOW (3 << 5) /* 1/3 distance power */ - -#define MST_MSCWR1_IRDA_FIR (1 << 4) /* IrDA transceiver SIR/FIR */ -#define MST_MSCWR1_GREENLED (1 << 3) /* LED D1 control */ -#define MST_MSCWR1_PDC_CTL (1 << 2) /* reserved */ -#define MST_MSCWR1_MTR_ON (1 << 1) /* Silent alert motor */ -#define MST_MSCWR1_SYSRESET (1 << 0) /* System reset */ - -#define MST_MSCWR2_USB_OTG_RST (1 << 6) /* USB On The Go reset */ -#define MST_MSCWR2_USB_OTG_SEL (1 << 5) /* USB On The Go control */ -#define MST_MSCWR2_nUSBC_SC (1 << 4) /* USB client soft connect control */ -#define MST_MSCWR2_I2S_SPKROFF (1 << 3) /* I2S CODEC amplifier control */ -#define MST_MSCWR2_AC97_SPKROFF (1 << 2) /* AC97 CODEC amplifier control */ -#define MST_MSCWR2_RADIO_PWR (1 << 1) /* Radio module power control */ -#define MST_MSCWR2_RADIO_WAKE (1 << 0) /* Radio module wake-up signal */ - -#define MST_MSCWR3_GPIO_RESET_EN (1 << 2) /* Enable GPIO Reset */ -#define MST_MSCWR3_GPIO_RESET (1 << 1) /* Initiate a GPIO Reset */ -#define MST_MSCWR3_COMMS_SW_RESET (1 << 0) /* Communications Processor Reset Control */ - -#define MST_MSCRD_nPENIRQ (1 << 9) /* ADI7873* nPENIRQ signal */ -#define MST_MSCRD_nMEMSTK_CD (1 << 8) /* Memory Stick detection signal */ -#define MST_MSCRD_nMMC_CD (1 << 7) /* SD/MMC card detection signal */ -#define MST_MSCRD_nUSIM_CD (1 << 6) /* USIM card detection signal */ -#define MST_MSCRD_USB_CBL (1 << 5) /* USB client cable status */ -#define MST_MSCRD_TS_BUSY (1 << 4) /* ADI7873 busy */ -#define MST_MSCRD_BTDSR (1 << 3) /* Bluetooth UART DSR */ -#define MST_MSCRD_BTRI (1 << 2) /* Bluetooth UART Ring Indicator */ -#define MST_MSCRD_BTDCD (1 << 1) /* Bluetooth UART DCD */ -#define MST_MSCRD_nMMC_WP (1 << 0) /* SD/MMC write-protect status */ - -#define MST_INT_S1_IRQ (1 << 15) /* PCMCIA socket 1 IRQ */ -#define MST_INT_S1_STSCHG (1 << 14) /* PCMCIA socket 1 status changed */ -#define MST_INT_S1_CD (1 << 13) /* PCMCIA socket 1 card detection */ -#define MST_INT_S0_IRQ (1 << 11) /* PCMCIA socket 0 IRQ */ -#define MST_INT_S0_STSCHG (1 << 10) /* PCMCIA socket 0 status changed */ -#define MST_INT_S0_CD (1 << 9) /* PCMCIA socket 0 card detection */ -#define MST_INT_nEXBRD_INT (1 << 7) /* Expansion board IRQ */ -#define MST_INT_MSINS (1 << 6) /* Memory Stick* detection */ -#define MST_INT_PENIRQ (1 << 5) /* ADI7873* touch-screen IRQ */ -#define MST_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ -#define MST_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ -#define MST_INT_USBC (1 << 2) /* USB client cable detection IRQ */ -#define MST_INT_USIM (1 << 1) /* USIM card detection IRQ */ -#define MST_INT_MMC (1 << 0) /* MMC/SD card detection IRQ */ - -#define MST_PCMCIA_nIRQ (1 << 10) /* IRQ / ready signal */ -#define MST_PCMCIA_nSPKR_BVD2 (1 << 9) /* VDD sense / digital speaker */ -#define MST_PCMCIA_nSTSCHG_BVD1 (1 << 8) /* VDD sense / card status changed */ -#define MST_PCMCIA_nVS2 (1 << 7) /* VSS voltage sense */ -#define MST_PCMCIA_nVS1 (1 << 6) /* VSS voltage sense */ -#define MST_PCMCIA_nCD (1 << 5) /* Card detection signal */ -#define MST_PCMCIA_RESET (1 << 4) /* Card reset signal */ -#define MST_PCMCIA_PWR_MASK (0x000f) /* MAX1602 power-supply controls */ - -#define MST_PCMCIA_PWR_VPP_0 0x0 /* voltage VPP = 0V */ -#define MST_PCMCIA_PWR_VPP_120 0x2 /* voltage VPP = 12V*/ -#define MST_PCMCIA_PWR_VPP_VCC 0x1 /* voltage VPP = VCC */ -#define MST_PCMCIA_PWR_VCC_0 0x0 /* voltage VCC = 0V */ -#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */ -#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */ - -#endif diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h deleted file mode 100644 index bee81d66c184..000000000000 --- a/include/asm-arm/arch-pxa/memory.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/memory.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0xa0000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * The nodes are matched with the physical SDRAM banks as follows: - * - * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff - * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff - * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff - * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff - * - * This needs a node mem size of 26 bits. - */ -#define NODE_MEM_SIZE_BITS 26 - -#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -void cmx270_pci_adjust_zones(int node, unsigned long *size, - unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - cmx270_pci_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) -#endif - -#endif diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h deleted file mode 100644 index 0499323010ba..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa25x.h +++ /dev/null @@ -1,161 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA25X_H -#define __ASM_ARCH_MFP_PXA25X_H - -#include -#include - -/* GPIO */ -#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) - -#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) - -/* Crystal and Clock Signals */ -#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) -#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) -#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) -#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) -#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) -#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) -#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) - -/* SDRAM and Static Memory I/O Signals */ -#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) -#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) -#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) -#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) -#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) - -/* Miscellaneous I/O and DMA Signals */ -#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) -#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) -#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) - -/* Alternate Bus Master Mode I/O Signals */ -#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) -#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) -#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) -#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) - -/* PC CARD */ -#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) -#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) -#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) -#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) -#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) -#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) -#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) -#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) -#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) -#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) - -/* FFUART */ -#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) -#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) -#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) -#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) -#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) -#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) -#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) -#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) - -/* BTUART */ -#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) -#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) -#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) -#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) - -/* STUART */ -#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) -#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) - -/* HWUART */ -#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) -#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) -#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) -#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) -#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) -#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) -#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) -#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) - -/* FICP */ -#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) -#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) - -/* PWM 0/1 */ -#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) -#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) - -/* AC97 */ -#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) -#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) -#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) -#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) -#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) - -/* I2S */ -#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) -#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) -#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) -#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) -#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) -#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) - -/* SSP 1 */ -#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) -#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) -#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) -#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) -#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) - -/* SSP 2 - NSSP */ -#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) -#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) -#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) -#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) -#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) -#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) -#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) -#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) - -/* MMC */ -#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) -#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) -#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) -#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) -#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) -#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) -#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) -#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) -#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) -#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) - -/* LCD */ -#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) -#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) -#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) -#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) -#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) -#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) -#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) -#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) -#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) -#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) -#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) -#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) -#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) -#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) -#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) -#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) -#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) -#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) -#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) -#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) - -#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h deleted file mode 100644 index bc73ab84167c..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa27x.h +++ /dev/null @@ -1,433 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA27X_H -#define __ASM_ARCH_MFP_PXA27X_H - -/* - * NOTE: for those special-function bidirectional GPIOs, as described - * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input - * alternative is preserved, the direction is actually selected by the - * specific controller, and this should work in most cases. - */ - -#include -#include - -/* GPIO */ -#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) - -/* Crystal and Clock Signals */ -#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) -#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) -#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) -#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) -#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) - -/* OS Timer Signals */ -#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) -#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) -#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) -#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) -#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) -#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) - -/* SDRAM and Static Memory I/O Signals */ -#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) -#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) -#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) -#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) -#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) -#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) -#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) - -/* Miscellaneous I/O and DMA Signals */ -#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) -#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) -#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) -#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) -#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) -#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) -#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) -#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) -#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) -#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) -#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) - -/* Alternate Bus Master Mode I/O Signals */ -#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) -#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) -#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) -#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) -#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) -#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) -#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) -#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) - -/* PC CARD */ -#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) -#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) -#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) -#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) -#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) -#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) -#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) -#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) -#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) -#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) -#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) -#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) -#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) -#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) -#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) -#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH) - -/* I2C */ -#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) -#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) - -/* FFUART */ -#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) -#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) -#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) -#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) -#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) -#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) -#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) -#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) -#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) -#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) -#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) -#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) -#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) -#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) -#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) -#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) -#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) -#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) -#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) -#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) -#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) -#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) -#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) -#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) -#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) -#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) -#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) -#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) -#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) - -/* BTUART */ -#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) -#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) -#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) -#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) - -/* STUART */ -#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) -#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) - -/* FICP */ -#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) -#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) -#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) -#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) - -/* PWM 0/1/2/3 */ -#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) -#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) -#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) -#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) -#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) -#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) -#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) -#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) -#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) -#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) - -/* AC97 */ -#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) -#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) -#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) -#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) -#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) -#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) -#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) -#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) -#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) -#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) -#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) -#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) -#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) - -/* I2S */ -#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) -#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) -#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) -#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) -#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) -#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) - -/* SSP 1 */ -#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) -#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) -#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) -#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) -#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) -#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) -#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) -#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) -#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) -#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) - -/* SSP 2 */ -#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) -#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) -#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) -#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) -#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) -#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) -#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) -#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) -#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) -#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) -#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) -#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) -#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) -#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) -#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) -#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) -#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) -#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) -#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) -#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) -#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) -#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) -#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) - -/* SSP 3 */ -#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) -#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) -#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) -#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) -#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) -#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) -#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) -#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) -#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) -#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) -#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) -#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) -#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) -#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) - -/* MMC */ -#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) -#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) -#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) -#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) -#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) -#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) - -/* LCD */ -#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) -#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) -#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) -#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) -#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) -#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) -#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) -#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) -#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) -#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) -#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) -#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) -#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) -#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) -#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) -#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) -#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) -#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) -#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) -#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) -#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) -#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) -#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) -#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) - -/* Keypad */ -#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) -#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) -#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) -#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) -#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) -#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) -#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) -#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) -#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) -#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) -#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) -#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) -#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) -#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) -#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) -#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) -#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) -#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) -#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) -#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) -#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) -#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) -#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) -#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) -#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) -#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) -#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) -#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) -#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) -#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) -#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) -#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) -#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) -#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) -#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) -#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) - -/* USB P3 */ -#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) -#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) -#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) -#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) -#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) -#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) -#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) -#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) -#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) -#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) - -/* USB P2 */ -#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) -#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) -#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) -#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) -#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) -#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) -#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) -#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) -#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) - -/* USB Host Port 1/2 */ -#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) -#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) -#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) -#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) - -/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ -#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) -#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) -#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) -#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) -#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) -#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) -#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) -#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) -#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) -#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) -#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) -#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) -#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) -#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) -#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) -#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) -#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) -#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) -#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) -#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) -#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) -#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) -#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) -#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) -#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) -#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) -#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) -#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) -#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) -#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) -#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) -#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) -#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) -#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) -#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) -#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) -#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) -#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) -#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) - -/* Universal Subscriber ID Interface */ -#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) -#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) -#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) -#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) -#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) -#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) -#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) -#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) -#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) -#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) - -/* Mobile Scalable Link (MSL) Interface */ -#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) -#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) -#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) -#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) -#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) -#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) -#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) -#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) -#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) -#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) -#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) -#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) -#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) -#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) - -/* Memory Stick Host Controller */ -#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) -#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) -#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) -#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) - -extern int keypad_set_wake(unsigned int on); -#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h deleted file mode 100644 index 8de1c0dae624..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h +++ /dev/null @@ -1,133 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA2XX_H -#define __ASM_ARCH_MFP_PXA2XX_H - -#include - -/* - * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: - * - * MFP_PIN(x) - * MFP_AFx - * MFP_LPM_DRIVE_{LOW, HIGH} - * MFP_LPM_EDGE_x - * - * other MFP_x bit definitions will be ignored - * - * and adds the below two bits specifically for pxa2xx: - * - * bit 23 - Input/Output (PXA2xx specific) - * bit 24 - Wakeup Enable(PXA2xx specific) - */ - -#define MFP_DIR_IN (0x0 << 23) -#define MFP_DIR_OUT (0x1 << 23) -#define MFP_DIR_MASK (0x1 << 23) -#define MFP_DIR(x) (((x) >> 23) & 0x1) - -#define MFP_LPM_CAN_WAKEUP (0x1 << 24) -#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) -#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) -#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) - -/* specifically for enabling wakeup on keypad GPIOs */ -#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) - -#define MFP_CFG_IN(pin, af) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) - -/* NOTE: pins configured as output _must_ provide a low power state, - * and this state should help to minimize the power dissipation. - */ -#define MFP_CFG_OUT(pin, af, state) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) - -/* Common configurations for pxa25x and pxa27x - * - * Note: pins configured as GPIO are always initialized to input - * so not to cause any side effect - */ -#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) -#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) -#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) -#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) -#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) -#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) -#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) -#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) -#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) -#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) - -extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); -extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm); -extern int gpio_set_wake(unsigned int gpio, unsigned int on); -#endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa300.h b/include/asm-arm/arch-pxa/mfp-pxa300.h deleted file mode 100644 index bb410313556f..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa300.h +++ /dev/null @@ -1,575 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa300.h - * - * PXA300/PXA310 specific MFP configuration definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA300_H -#define __ASM_ARCH_MFP_PXA300_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF1) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF3) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF2) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF3) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF3) -#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) - -#ifdef CONFIG_CPU_PXA310 -#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -#endif - -/* Chip Select */ -#define GPIO2_nCS3 MFP_CFG(GPIO2, AF1) - -/* AC97 */ -#define GPIO23_AC97_nACRESET MFP_CFG(GPIO23, AF1) -#define GPIO24_AC97_SYSCLK MFP_CFG(GPIO24, AF1) -#define GPIO29_AC97_BITCLK MFP_CFG(GPIO29, AF1) -#define GPIO25_AC97_SDATA_IN_0 MFP_CFG(GPIO25, AF1) -#define GPIO26_AC97_SDATA_IN_1 MFP_CFG(GPIO26, AF1) -#define GPIO17_AC97_SDATA_IN_2 MFP_CFG(GPIO17, AF3) -#define GPIO21_AC97_SDATA_IN_2 MFP_CFG(GPIO21, AF2) -#define GPIO18_AC97_SDATA_IN_3 MFP_CFG(GPIO18, AF3) -#define GPIO22_AC97_SDATA_IN_3 MFP_CFG(GPIO22, AF2) -#define GPIO27_AC97_SDATA_OUT MFP_CFG(GPIO27, AF1) -#define GPIO28_AC97_SYNC MFP_CFG(GPIO28, AF1) - -/* I2C */ -#define GPIO21_I2C_SCL MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH) -#define GPIO22_I2C_SDA MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH) - -/* QCI */ -#define GPIO39_CI_DD_0 MFP_CFG_DRV(GPIO39, AF1, DS04X) -#define GPIO40_CI_DD_1 MFP_CFG_DRV(GPIO40, AF1, DS04X) -#define GPIO41_CI_DD_2 MFP_CFG_DRV(GPIO41, AF1, DS04X) -#define GPIO42_CI_DD_3 MFP_CFG_DRV(GPIO42, AF1, DS04X) -#define GPIO43_CI_DD_4 MFP_CFG_DRV(GPIO43, AF1, DS04X) -#define GPIO44_CI_DD_5 MFP_CFG_DRV(GPIO44, AF1, DS04X) -#define GPIO45_CI_DD_6 MFP_CFG_DRV(GPIO45, AF1, DS04X) -#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X) -#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X) -#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X) -#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X) -#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X) -#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X) -#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X) - -/* KEYPAD */ -#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT) -#define GPIO4_KP_DKIN_7 MFP_CFG_LPM(GPIO4, AF2, FLOAT) -#define GPIO16_KP_DKIN_6 MFP_CFG_LPM(GPIO16, AF6, FLOAT) -#define GPIO83_KP_DKIN_2 MFP_CFG_LPM(GPIO83, AF5, FLOAT) -#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF5, FLOAT) -#define GPIO85_KP_DKIN_0 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -#define GPIO86_KP_DKIN_1 MFP_CFG_LPM(GPIO86, AF3, FLOAT) -#define GPIO87_KP_DKIN_2 MFP_CFG_LPM(GPIO87, AF3, FLOAT) -#define GPIO88_KP_DKIN_3 MFP_CFG_LPM(GPIO88, AF3, FLOAT) -#define GPIO89_KP_DKIN_3 MFP_CFG_LPM(GPIO89, AF3, FLOAT) -#define GPIO107_KP_DKIN_0 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -#define GPIO108_KP_DKIN_1 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -#define GPIO109_KP_DKIN_2 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -#define GPIO110_KP_DKIN_3 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -#define GPIO111_KP_DKIN_4 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -#define GPIO112_KP_DKIN_5 MFP_CFG_LPM(GPIO112, AF2, FLOAT) -#define GPIO113_KP_DKIN_6 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -#define GPIO114_KP_DKIN_7 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -#define GPIO115_KP_DKIN_0 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -#define GPIO116_KP_DKIN_1 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -#define GPIO117_KP_DKIN_2 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -#define GPIO118_KP_DKIN_3 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -#define GPIO119_KP_DKIN_4 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -#define GPIO120_KP_DKIN_5 MFP_CFG_LPM(GPIO120, AF2, FLOAT) -#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF5, FLOAT) -#define GPIO0_2_KP_DKIN_0 MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) -#define GPIO1_2_KP_DKIN_1 MFP_CFG_LPM(GPIO1_2, AF2, FLOAT) -#define GPIO2_2_KP_DKIN_6 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -#define GPIO3_2_KP_DKIN_7 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -#define GPIO4_2_KP_DKIN_1 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) -#define GPIO5_2_KP_DKIN_0 MFP_CFG_LPM(GPIO5_2, AF2, FLOAT) - -#define GPIO5_KP_MKIN_0 MFP_CFG_LPM(GPIO5, AF2, FLOAT) -#define GPIO6_KP_MKIN_1 MFP_CFG_LPM(GPIO6, AF2, FLOAT) -#define GPIO9_KP_MKIN_6 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -#define GPIO10_KP_MKIN_7 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -#define GPIO70_KP_MKIN_6 MFP_CFG_LPM(GPIO70, AF3, FLOAT) -#define GPIO71_KP_MKIN_7 MFP_CFG_LPM(GPIO71, AF3, FLOAT) -#define GPIO100_KP_MKIN_6 MFP_CFG_LPM(GPIO100, AF7, FLOAT) -#define GPIO101_KP_MKIN_7 MFP_CFG_LPM(GPIO101, AF7, FLOAT) -#define GPIO112_KP_MKIN_6 MFP_CFG_LPM(GPIO112, AF4, FLOAT) -#define GPIO113_KP_MKIN_7 MFP_CFG_LPM(GPIO113, AF4, FLOAT) -#define GPIO115_KP_MKIN_0 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -#define GPIO116_KP_MKIN_1 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -#define GPIO117_KP_MKIN_2 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -#define GPIO118_KP_MKIN_3 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -#define GPIO119_KP_MKIN_4 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -#define GPIO120_KP_MKIN_5 MFP_CFG_LPM(GPIO120, AF1, FLOAT) -#define GPIO125_KP_MKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -#define GPIO2_2_KP_MKIN_6 MFP_CFG_LPM(GPIO2_2, AF1, FLOAT) -#define GPIO3_2_KP_MKIN_7 MFP_CFG_LPM(GPIO3_2, AF1, FLOAT) - -#define GPIO7_KP_MKOUT_5 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF3, DRIVE_HIGH) -#define GPIO12_KP_MKOUT_6 MFP_CFG_LPM(GPIO12, AF3, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_7 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -#define GPIO19_KP_MKOUT_4 MFP_CFG_LPM(GPIO19, AF3, DRIVE_HIGH) -#define GPIO20_KP_MKOUT_5 MFP_CFG_LPM(GPIO20, AF3, DRIVE_HIGH) -#define GPIO38_KP_MKOUT_5 MFP_CFG_LPM(GPIO38, AF5, DRIVE_HIGH) -#define GPIO53_KP_MKOUT_6 MFP_CFG_LPM(GPIO53, AF5, DRIVE_HIGH) -#define GPIO78_KP_MKOUT_7 MFP_CFG_LPM(GPIO78, AF5, DRIVE_HIGH) -#define GPIO85_KP_MKOUT_0 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -#define GPIO86_KP_MKOUT_1 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -#define GPIO87_KP_MKOUT_2 MFP_CFG_LPM(GPIO87, AF2, DRIVE_HIGH) -#define GPIO88_KP_MKOUT_3 MFP_CFG_LPM(GPIO88, AF2, DRIVE_HIGH) -#define GPIO104_KP_MKOUT_6 MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH) -#define GPIO105_KP_MKOUT_7 MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH) -#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -#define GPIO126_KP_MKOUT_7 MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH) -#define GPIO5_2_KP_MKOUT_6 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) -#define GPIO4_2_KP_MKOUT_5 MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH) -#define GPIO6_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH) - -/* LCD */ -#define GPIO54_LCD_LDD_0 MFP_CFG_DRV(GPIO54, AF1, DS01X) -#define GPIO55_LCD_LDD_1 MFP_CFG_DRV(GPIO55, AF1, DS01X) -#define GPIO56_LCD_LDD_2 MFP_CFG_DRV(GPIO56, AF1, DS01X) -#define GPIO57_LCD_LDD_3 MFP_CFG_DRV(GPIO57, AF1, DS01X) -#define GPIO58_LCD_LDD_4 MFP_CFG_DRV(GPIO58, AF1, DS01X) -#define GPIO59_LCD_LDD_5 MFP_CFG_DRV(GPIO59, AF1, DS01X) -#define GPIO60_LCD_LDD_6 MFP_CFG_DRV(GPIO60, AF1, DS01X) -#define GPIO61_LCD_LDD_7 MFP_CFG_DRV(GPIO61, AF1, DS01X) -#define GPIO62_LCD_LDD_8 MFP_CFG_DRV(GPIO62, AF1, DS01X) -#define GPIO63_LCD_LDD_9 MFP_CFG_DRV(GPIO63, AF1, DS01X) -#define GPIO64_LCD_LDD_10 MFP_CFG_DRV(GPIO64, AF1, DS01X) -#define GPIO65_LCD_LDD_11 MFP_CFG_DRV(GPIO65, AF1, DS01X) -#define GPIO66_LCD_LDD_12 MFP_CFG_DRV(GPIO66, AF1, DS01X) -#define GPIO67_LCD_LDD_13 MFP_CFG_DRV(GPIO67, AF1, DS01X) -#define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) -#define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) -#define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) -#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) -#define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) -#define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) -#define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) -#define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS02X) -#define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) -#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) - -#define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) -#define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) -#define GPIO63_LCD_VSYNC MFP_CFG_DRV(GPIO63, AF2, DS01X) - -/* Mini-LCD */ -#define GPIO72_MLCD_FCLK MFP_CFG_DRV(GPIO72, AF7, DS08X) -#define GPIO73_MLCD_LCLK MFP_CFG_DRV(GPIO73, AF7, DS08X) -#define GPIO54_MLCD_LDD_0 MFP_CFG_DRV(GPIO54, AF7, DS08X) -#define GPIO55_MLCD_LDD_1 MFP_CFG_DRV(GPIO55, AF7, DS08X) -#define GPIO56_MLCD_LDD_2 MFP_CFG_DRV(GPIO56, AF7, DS08X) -#define GPIO57_MLCD_LDD_3 MFP_CFG_DRV(GPIO57, AF7, DS08X) -#define GPIO58_MLCD_LDD_4 MFP_CFG_DRV(GPIO58, AF7, DS08X) -#define GPIO59_MLCD_LDD_5 MFP_CFG_DRV(GPIO59, AF7, DS08X) -#define GPIO60_MLCD_LDD_6 MFP_CFG_DRV(GPIO60, AF7, DS08X) -#define GPIO61_MLCD_LDD_7 MFP_CFG_DRV(GPIO61, AF7, DS08X) -#define GPIO62_MLCD_LDD_8 MFP_CFG_DRV(GPIO62, AF7, DS08X) -#define GPIO63_MLCD_LDD_9 MFP_CFG_DRV(GPIO63, AF7, DS08X) -#define GPIO64_MLCD_LDD_10 MFP_CFG_DRV(GPIO64, AF7, DS08X) -#define GPIO65_MLCD_LDD_11 MFP_CFG_DRV(GPIO65, AF7, DS08X) -#define GPIO66_MLCD_LDD_12 MFP_CFG_DRV(GPIO66, AF7, DS08X) -#define GPIO67_MLCD_LDD_13 MFP_CFG_DRV(GPIO67, AF7, DS08X) -#define GPIO68_MLCD_LDD_14 MFP_CFG_DRV(GPIO68, AF7, DS08X) -#define GPIO69_MLCD_LDD_15 MFP_CFG_DRV(GPIO69, AF7, DS08X) -#define GPIO74_MLCD_PCLK MFP_CFG_DRV(GPIO74, AF7, DS08X) -#define GPIO75_MLCD_BIAS MFP_CFG_DRV(GPIO75, AF2, DS08X) - -/* MMC1 */ -#define GPIO7_MMC1_CLK MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -#define GPIO8_MMC1_CMD MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -#define GPIO14_MMC1_CMD MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH) -#define GPIO15_MMC1_CMD MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH) -#define GPIO3_MMC1_DAT0 MFP_CFG_LPM(GPIO3, AF4, DRIVE_HIGH) -#define GPIO4_MMC1_DAT1 MFP_CFG_LPM(GPIO4, AF4, DRIVE_HIGH) -#define GPIO5_MMC1_DAT2 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -#define GPIO6_MMC1_DAT3 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) - -/* MMC2 */ -#define GPIO9_MMC2_DAT0 MFP_CFG_LPM(GPIO9, AF4, PULL_HIGH) -#define GPIO10_MMC2_DAT1 MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH) -#define GPIO11_MMC2_DAT2 MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH) -#define GPIO12_MMC2_DAT3 MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH) -#define GPIO13_MMC2_CLK MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH) -#define GPIO14_MMC2_CMD MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH) -#define GPIO77_MMC2_DAT0 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -#define GPIO78_MMC2_DAT1 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) -#define GPIO79_MMC2_DAT2 MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -#define GPIO80_MMC2_DAT3 MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) -#define GPIO81_MMC2_CLK MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH) -#define GPIO82_MMC2_CMD MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH) - -/* SSP1 */ -#define GPIO89_SSP1_EXTCLK MFP_CFG(GPIO89, AF1) -#define GPIO90_SSP1_SYSCLK MFP_CFG(GPIO90, AF1) -#define GPIO15_SSP1_SCLK MFP_CFG(GPIO15, AF6) -#define GPIO16_SSP1_FRM MFP_CFG(GPIO16, AF2) -#define GPIO33_SSP1_SCLK MFP_CFG(GPIO33, AF5) -#define GPIO34_SSP1_FRM MFP_CFG(GPIO34, AF5) -#define GPIO85_SSP1_SCLK MFP_CFG(GPIO85, AF1) -#define GPIO86_SSP1_FRM MFP_CFG(GPIO86, AF1) -#define GPIO18_SSP1_TXD MFP_CFG(GPIO18, AF7) -#define GPIO18_SSP1_RXD MFP_CFG(GPIO18, AF2) -#define GPIO20_SSP1_TXD MFP_CFG(GPIO20, AF2) -#define GPIO20_SSP1_RXD MFP_CFG(GPIO20, AF7) -#define GPIO35_SSP1_TXD MFP_CFG(GPIO35, AF5) -#define GPIO35_SSP1_RXD MFP_CFG(GPIO35, AF4) -#define GPIO36_SSP1_TXD MFP_CFG(GPIO36, AF5) -#define GPIO36_SSP1_RXD MFP_CFG(GPIO36, AF6) -#define GPIO87_SSP1_TXD MFP_CFG(GPIO87, AF1) -#define GPIO87_SSP1_RXD MFP_CFG(GPIO87, AF6) -#define GPIO88_SSP1_TXD MFP_CFG(GPIO88, AF6) -#define GPIO88_SSP1_RXD MFP_CFG(GPIO88, AF1) - -/* SSP2 */ -#define GPIO29_SSP2_EXTCLK MFP_CFG(GPIO29, AF2) -#define GPIO23_SSP2_SCLK MFP_CFG(GPIO23, AF2) -#define GPIO17_SSP2_FRM MFP_CFG(GPIO17, AF2) -#define GPIO25_SSP2_SCLK MFP_CFG(GPIO25, AF2) -#define GPIO26_SSP2_FRM MFP_CFG(GPIO26, AF2) -#define GPIO33_SSP2_SCLK MFP_CFG(GPIO33, AF6) -#define GPIO34_SSP2_FRM MFP_CFG(GPIO34, AF6) -#define GPIO64_SSP2_SCLK MFP_CFG(GPIO64, AF2) -#define GPIO65_SSP2_FRM MFP_CFG(GPIO65, AF2) -#define GPIO19_SSP2_TXD MFP_CFG(GPIO19, AF2) -#define GPIO19_SSP2_RXD MFP_CFG(GPIO19, AF7) -#define GPIO24_SSP2_TXD MFP_CFG(GPIO24, AF5) -#define GPIO24_SSP2_RXD MFP_CFG(GPIO24, AF4) -#define GPIO27_SSP2_TXD MFP_CFG(GPIO27, AF2) -#define GPIO27_SSP2_RXD MFP_CFG(GPIO27, AF5) -#define GPIO28_SSP2_TXD MFP_CFG(GPIO28, AF5) -#define GPIO28_SSP2_RXD MFP_CFG(GPIO28, AF2) -#define GPIO35_SSP2_TXD MFP_CFG(GPIO35, AF7) -#define GPIO35_SSP2_RXD MFP_CFG(GPIO35, AF6) -#define GPIO66_SSP2_TXD MFP_CFG(GPIO66, AF4) -#define GPIO66_SSP2_RXD MFP_CFG(GPIO66, AF2) -#define GPIO67_SSP2_TXD MFP_CFG(GPIO67, AF2) -#define GPIO67_SSP2_RXD MFP_CFG(GPIO67, AF4) -#define GPIO36_SSP2_TXD MFP_CFG(GPIO36, AF7) - -/* SSP3 */ -#define GPIO69_SSP3_FRM MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW) -#define GPIO68_SSP3_SCLK MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT) -#define GPIO92_SSP3_FRM MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW) -#define GPIO91_SSP3_SCLK MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT) -#define GPIO70_SSP3_TXD MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW) -#define GPIO70_SSP3_RXD MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT) -#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW) -#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT) -#define GPIO93_SSP3_TXD MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW) -#define GPIO93_SSP3_RXD MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT) -#define GPIO94_SSP3_TXD MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW) -#define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) - -/* SSP4 */ -#define GPIO95_SSP4_SCLK MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_SSP4_FRM MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -#define GPIO97_SSP4_TXD MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH) -#define GPIO97_SSP4_RXD MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH) -#define GPIO98_SSP4_TXD MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH) -#define GPIO98_SSP4_RXD MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH) - -/* UART1 */ -#define GPIO32_UART1_CTS MFP_CFG_LPM(GPIO32, AF2, FLOAT) -#define GPIO37_UART1_CTS MFP_CFG_LPM(GPIO37, AF4, FLOAT) -#define GPIO79_UART1_CTS MFP_CFG_LPM(GPIO79, AF1, FLOAT) -#define GPIO84_UART1_CTS MFP_CFG_LPM(GPIO84, AF3, FLOAT) -#define GPIO101_UART1_CTS MFP_CFG_LPM(GPIO101, AF1, FLOAT) -#define GPIO106_UART1_CTS MFP_CFG_LPM(GPIO106, AF6, FLOAT) - -#define GPIO32_UART1_RTS MFP_CFG_LPM(GPIO32, AF4, FLOAT) -#define GPIO37_UART1_RTS MFP_CFG_LPM(GPIO37, AF2, FLOAT) -#define GPIO79_UART1_RTS MFP_CFG_LPM(GPIO79, AF3, FLOAT) -#define GPIO84_UART1_RTS MFP_CFG_LPM(GPIO84, AF1, FLOAT) -#define GPIO101_UART1_RTS MFP_CFG_LPM(GPIO101, AF6, FLOAT) -#define GPIO106_UART1_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) - -#define GPIO34_UART1_DSR MFP_CFG_LPM(GPIO34, AF2, FLOAT) -#define GPIO36_UART1_DSR MFP_CFG_LPM(GPIO36, AF4, FLOAT) -#define GPIO81_UART1_DSR MFP_CFG_LPM(GPIO81, AF1, FLOAT) -#define GPIO83_UART1_DSR MFP_CFG_LPM(GPIO83, AF3, FLOAT) -#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -#define GPIO105_UART1_DSR MFP_CFG_LPM(GPIO105, AF6, FLOAT) - -#define GPIO34_UART1_DTR MFP_CFG_LPM(GPIO34, AF4, FLOAT) -#define GPIO36_UART1_DTR MFP_CFG_LPM(GPIO36, AF2, FLOAT) -#define GPIO81_UART1_DTR MFP_CFG_LPM(GPIO81, AF3, FLOAT) -#define GPIO83_UART1_DTR MFP_CFG_LPM(GPIO83, AF1, FLOAT) -#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -#define GPIO105_UART1_DTR MFP_CFG_LPM(GPIO105, AF1, FLOAT) - -#define GPIO35_UART1_RI MFP_CFG_LPM(GPIO35, AF2, FLOAT) -#define GPIO82_UART1_RI MFP_CFG_LPM(GPIO82, AF1, FLOAT) -#define GPIO104_UART1_RI MFP_CFG_LPM(GPIO104, AF1, FLOAT) - -#define GPIO33_UART1_DCD MFP_CFG_LPM(GPIO33, AF2, FLOAT) -#define GPIO80_UART1_DCD MFP_CFG_LPM(GPIO80, AF1, FLOAT) -#define GPIO102_UART1_DCD MFP_CFG_LPM(GPIO102, AF1, FLOAT) - -#define GPIO30_UART1_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -#define GPIO31_UART1_RXD MFP_CFG_LPM(GPIO31, AF4, FLOAT) -#define GPIO77_UART1_RXD MFP_CFG_LPM(GPIO77, AF1, FLOAT) -#define GPIO78_UART1_RXD MFP_CFG_LPM(GPIO78, AF3, FLOAT) -#define GPIO99_UART1_RXD MFP_CFG_LPM(GPIO99, AF1, FLOAT) -#define GPIO100_UART1_RXD MFP_CFG_LPM(GPIO100, AF6, FLOAT) -#define GPIO102_UART1_RXD MFP_CFG_LPM(GPIO102, AF6, FLOAT) -#define GPIO104_UART1_RXD MFP_CFG_LPM(GPIO104, AF4, FLOAT) - -#define GPIO30_UART1_TXD MFP_CFG_LPM(GPIO30, AF4, FLOAT) -#define GPIO31_UART1_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -#define GPIO77_UART1_TXD MFP_CFG_LPM(GPIO77, AF3, FLOAT) -#define GPIO78_UART1_TXD MFP_CFG_LPM(GPIO78, AF1, FLOAT) -#define GPIO99_UART1_TXD MFP_CFG_LPM(GPIO99, AF6, FLOAT) -#define GPIO100_UART1_TXD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -#define GPIO102_UART1_TXD MFP_CFG_LPM(GPIO102, AF4, FLOAT) - -/* UART2 */ -#define GPIO15_UART2_CTS MFP_CFG_LPM(GPIO15, AF3, FLOAT) -#define GPIO16_UART2_CTS MFP_CFG_LPM(GPIO16, AF5, FLOAT) -#define GPIO111_UART2_CTS MFP_CFG_LPM(GPIO111, AF3, FLOAT) -#define GPIO114_UART2_CTS MFP_CFG_LPM(GPIO114, AF1, FLOAT) - -#define GPIO15_UART2_RTS MFP_CFG_LPM(GPIO15, AF4, FLOAT) -#define GPIO16_UART2_RTS MFP_CFG_LPM(GPIO16, AF4, FLOAT) -#define GPIO114_UART2_RTS MFP_CFG_LPM(GPIO114, AF3, FLOAT) -#define GPIO111_UART2_RTS MFP_CFG_LPM(GPIO111, AF1, FLOAT) - -#define GPIO18_UART2_RXD MFP_CFG_LPM(GPIO18, AF5, FLOAT) -#define GPIO19_UART2_RXD MFP_CFG_LPM(GPIO19, AF4, FLOAT) -#define GPIO112_UART2_RXD MFP_CFG_LPM(GPIO112, AF1, FLOAT) -#define GPIO113_UART2_RXD MFP_CFG_LPM(GPIO113, AF3, FLOAT) - -#define GPIO18_UART2_TXD MFP_CFG_LPM(GPIO18, AF4, FLOAT) -#define GPIO19_UART2_TXD MFP_CFG_LPM(GPIO19, AF5, FLOAT) -#define GPIO112_UART2_TXD MFP_CFG_LPM(GPIO112, AF3, FLOAT) -#define GPIO113_UART2_TXD MFP_CFG_LPM(GPIO113, AF1, FLOAT) - -/* UART3 */ -#define GPIO91_UART3_CTS MFP_CFG_LPM(GPIO91, AF2, FLOAT) -#define GPIO92_UART3_CTS MFP_CFG_LPM(GPIO92, AF4, FLOAT) -#define GPIO107_UART3_CTS MFP_CFG_LPM(GPIO107, AF1, FLOAT) -#define GPIO108_UART3_CTS MFP_CFG_LPM(GPIO108, AF3, FLOAT) - -#define GPIO91_UART3_RTS MFP_CFG_LPM(GPIO91, AF4, FLOAT) -#define GPIO92_UART3_RTS MFP_CFG_LPM(GPIO92, AF2, FLOAT) -#define GPIO107_UART3_RTS MFP_CFG_LPM(GPIO107, AF3, FLOAT) -#define GPIO108_UART3_RTS MFP_CFG_LPM(GPIO108, AF1, FLOAT) - -#define GPIO7_UART3_RXD MFP_CFG_LPM(GPIO7, AF2, FLOAT) -#define GPIO8_UART3_RXD MFP_CFG_LPM(GPIO8, AF6, FLOAT) -#define GPIO93_UART3_RXD MFP_CFG_LPM(GPIO93, AF4, FLOAT) -#define GPIO94_UART3_RXD MFP_CFG_LPM(GPIO94, AF2, FLOAT) -#define GPIO109_UART3_RXD MFP_CFG_LPM(GPIO109, AF3, FLOAT) -#define GPIO110_UART3_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) - -#define GPIO7_UART3_TXD MFP_CFG_LPM(GPIO7, AF6, FLOAT) -#define GPIO8_UART3_TXD MFP_CFG_LPM(GPIO8, AF2, FLOAT) -#define GPIO93_UART3_TXD MFP_CFG_LPM(GPIO93, AF2, FLOAT) -#define GPIO94_UART3_TXD MFP_CFG_LPM(GPIO94, AF4, FLOAT) -#define GPIO109_UART3_TXD MFP_CFG_LPM(GPIO109, AF1, FLOAT) -#define GPIO110_UART3_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) - -/* USB Host */ -#define GPIO0_2_USBH_PEN MFP_CFG(GPIO0_2, AF1) -#define GPIO1_2_USBH_PWR MFP_CFG(GPIO1_2, AF1) - -/* USB P3 */ -#define GPIO77_USB_P3_1 MFP_CFG(GPIO77, AF2) -#define GPIO78_USB_P3_2 MFP_CFG(GPIO78, AF2) -#define GPIO79_USB_P3_3 MFP_CFG(GPIO79, AF2) -#define GPIO80_USB_P3_4 MFP_CFG(GPIO80, AF2) -#define GPIO81_USB_P3_5 MFP_CFG(GPIO81, AF2) -#define GPIO82_USB_P3_6 MFP_CFG(GPIO82, AF2) - -/* PWM */ -#define GPIO17_PWM0_OUT MFP_CFG(GPIO17, AF1) -#define GPIO18_PWM1_OUT MFP_CFG(GPIO18, AF1) -#define GPIO19_PWM2_OUT MFP_CFG(GPIO19, AF1) -#define GPIO20_PWM3_OUT MFP_CFG(GPIO20, AF1) - -/* CIR */ -#define GPIO8_CIR_OUT MFP_CFG(GPIO8, AF5) -#define GPIO16_CIR_OUT MFP_CFG(GPIO16, AF3) - -#define GPIO20_OW_DQ_IN MFP_CFG(GPIO20, AF5) -#define GPIO126_OW_DQ MFP_CFG(GPIO126, AF2) - -#define GPIO0_DF_RDY MFP_CFG(GPIO0, AF1) -#define GPIO7_CLK_BYPASS_XSC MFP_CFG(GPIO7, AF7) -#define GPIO17_EXT_SYNC_MVT_0 MFP_CFG(GPIO17, AF6) -#define GPIO18_EXT_SYNC_MVT_1 MFP_CFG(GPIO18, AF6) -#define GPIO19_OST_CHOUT_MVT_0 MFP_CFG(GPIO19, AF6) -#define GPIO20_OST_CHOUT_MVT_1 MFP_CFG(GPIO20, AF6) -#define GPIO49_48M_CLK MFP_CFG(GPIO49, AF2) -#define GPIO126_EXT_CLK MFP_CFG(GPIO126, AF3) -#define GPIO127_CLK_BYPASS_GB MFP_CFG(GPIO127, AF7) -#define GPIO71_EXT_MATCH_MVT MFP_CFG(GPIO71, AF6) - -#define GPIO3_uIO_IN MFP_CFG(GPIO3, AF1) - -#define GPIO4_uSIM_CARD_STATE MFP_CFG(GPIO4, AF1) -#define GPIO5_uSIM_uCLK MFP_CFG(GPIO5, AF1) -#define GPIO6_uSIM_uRST MFP_CFG(GPIO6, AF1) -#define GPIO16_uSIM_UVS_0 MFP_CFG(GPIO16, AF1) - -#define GPIO9_SCIO MFP_CFG(GPIO9, AF1) -#define GPIO20_RTC_MVT MFP_CFG(GPIO20, AF4) -#define GPIO126_RTC_MVT MFP_CFG(GPIO126, AF1) - -/* - * PXA300 specific MFP configurations - */ -#ifdef CONFIG_CPU_PXA300 -#define GPIO99_USB_P2_2 MFP_CFG(GPIO99, AF2) -#define GPIO99_USB_P2_5 MFP_CFG(GPIO99, AF3) -#define GPIO99_USB_P2_6 MFP_CFG(GPIO99, AF4) -#define GPIO100_USB_P2_2 MFP_CFG(GPIO100, AF4) -#define GPIO100_USB_P2_5 MFP_CFG(GPIO100, AF5) -#define GPIO101_USB_P2_1 MFP_CFG(GPIO101, AF2) -#define GPIO102_USB_P2_4 MFP_CFG(GPIO102, AF2) -#define GPIO104_USB_P2_3 MFP_CFG(GPIO104, AF2) -#define GPIO105_USB_P2_5 MFP_CFG(GPIO105, AF2) -#define GPIO100_USB_P2_6 MFP_CFG(GPIO100, AF2) -#define GPIO106_USB_P2_7 MFP_CFG(GPIO106, AF2) -#define GPIO103_USB_P2_8 MFP_CFG(GPIO103, AF2) - -/* U2D UTMI */ -#define GPIO38_UTM_CLK MFP_CFG(GPIO38, AF1) -#define GPIO26_U2D_RXERROR MFP_CFG(GPIO26, AF3) -#define GPIO50_U2D_RXERROR MFP_CFG(GPIO50, AF1) -#define GPIO89_U2D_RXERROR MFP_CFG(GPIO89, AF5) -#define GPIO24_UTM_RXVALID MFP_CFG(GPIO24, AF3) -#define GPIO48_UTM_RXVALID MFP_CFG(GPIO48, AF2) -#define GPIO87_UTM_RXVALID MFP_CFG(GPIO87, AF5) -#define GPIO25_UTM_RXACTIVE MFP_CFG(GPIO25, AF3) -#define GPIO47_UTM_RXACTIVE MFP_CFG(GPIO47, AF2) -#define GPIO49_UTM_RXACTIVE MFP_CFG(GPIO49, AF1) -#define GPIO88_UTM_RXACTIVE MFP_CFG(GPIO88, AF5) -#define GPIO53_UTM_TXREADY MFP_CFG(GPIO53, AF1) -#define GPIO67_UTM_LINESTATE_0 MFP_CFG(GPIO67, AF3) -#define GPIO92_UTM_LINESTATE_0 MFP_CFG(GPIO92, AF3) -#define GPIO104_UTM_LINESTATE_0 MFP_CFG(GPIO104, AF3) -#define GPIO109_UTM_LINESTATE_0 MFP_CFG(GPIO109, AF4) -#define GPIO68_UTM_LINESTATE_1 MFP_CFG(GPIO68, AF3) -#define GPIO93_UTM_LINESTATE_1 MFP_CFG(GPIO93, AF3) -#define GPIO105_UTM_LINESTATE_1 MFP_CFG(GPIO105, AF3) -#define GPIO27_U2D_OPMODE_0 MFP_CFG(GPIO27, AF4) -#define GPIO51_U2D_OPMODE_0 MFP_CFG(GPIO51, AF2) -#define GPIO90_U2D_OPMODE_0 MFP_CFG(GPIO90, AF7) -#define GPIO28_U2D_OPMODE_1 MFP_CFG(GPIO28, AF4) -#define GPIO52_U2D_OPMODE_1 MFP_CFG(GPIO52, AF2) -#define GPIO106_U2D_OPMODE_1 MFP_CFG(GPIO106, AF3) -#define GPIO110_U2D_OPMODE_1 MFP_CFG(GPIO110, AF5) -#define GPIO76_U2D_RESET MFP_CFG(GPIO76, AF1) -#define GPIO95_U2D_RESET MFP_CFG(GPIO95, AF2) -#define GPIO100_U2D_RESET MFP_CFG(GPIO100, AF3) -#define GPIO66_U2D_SUSPEND MFP_CFG(GPIO66, AF3) -#define GPIO98_U2D_SUSPEND MFP_CFG(GPIO98, AF2) -#define GPIO103_U2D_SUSPEND MFP_CFG(GPIO103, AF3) -#define GPIO65_U2D_TERM_SEL MFP_CFG(GPIO65, AF5) -#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF3) -#define GPIO102_U2D_TERM_SEL MFP_CFG(GPIO102, AF5) -#define GPIO29_U2D_TXVALID MFP_CFG(GPIO29, AF3) -#define GPIO52_U2D_TXVALID MFP_CFG(GPIO52, AF4) -#define GPIO69_U2D_TXVALID MFP_CFG(GPIO69, AF3) -#define GPIO85_U2D_TXVALID MFP_CFG(GPIO85, AF7) -#define GPIO64_U2D_XCVR_SEL MFP_CFG(GPIO64, AF5) -#define GPIO96_U2D_XCVR_SEL MFP_CFG(GPIO96, AF3) -#define GPIO101_U2D_XCVR_SEL MFP_CFG(GPIO101, AF5) -#define GPIO30_UTM_PHYDATA_0 MFP_CFG(GPIO30, AF3) -#define GPIO31_UTM_PHYDATA_1 MFP_CFG(GPIO31, AF3) -#define GPIO32_UTM_PHYDATA_2 MFP_CFG(GPIO32, AF3) -#define GPIO33_UTM_PHYDATA_3 MFP_CFG(GPIO33, AF3) -#define GPIO34_UTM_PHYDATA_4 MFP_CFG(GPIO34, AF3) -#define GPIO35_UTM_PHYDATA_5 MFP_CFG(GPIO35, AF3) -#define GPIO36_UTM_PHYDATA_6 MFP_CFG(GPIO36, AF3) -#define GPIO37_UTM_PHYDATA_7 MFP_CFG(GPIO37, AF3) -#define GPIO39_UTM_PHYDATA_0 MFP_CFG(GPIO39, AF3) -#define GPIO40_UTM_PHYDATA_1 MFP_CFG(GPIO40, AF3) -#define GPIO41_UTM_PHYDATA_2 MFP_CFG(GPIO41, AF3) -#define GPIO42_UTM_PHYDATA_3 MFP_CFG(GPIO42, AF3) -#define GPIO43_UTM_PHYDATA_4 MFP_CFG(GPIO43, AF3) -#define GPIO44_UTM_PHYDATA_5 MFP_CFG(GPIO44, AF3) -#define GPIO45_UTM_PHYDATA_6 MFP_CFG(GPIO45, AF3) -#define GPIO46_UTM_PHYDATA_7 MFP_CFG(GPIO46, AF3) -#endif /* CONFIG_CPU_PXA300 */ - -/* - * PXA310 specific MFP configurations - */ -#ifdef CONFIG_CPU_PXA310 -/* USB P2 */ -#define GPIO36_USB_P2_1 MFP_CFG(GPIO36, AF1) -#define GPIO30_USB_P2_2 MFP_CFG(GPIO30, AF1) -#define GPIO35_USB_P2_3 MFP_CFG(GPIO35, AF1) -#define GPIO32_USB_P2_4 MFP_CFG(GPIO32, AF1) -#define GPIO34_USB_P2_5 MFP_CFG(GPIO34, AF1) -#define GPIO31_USB_P2_6 MFP_CFG(GPIO31, AF1) - -/* MMC1 */ -#define GPIO24_MMC1_CMD MFP_CFG(GPIO24, AF3) -#define GPIO29_MMC1_DAT0 MFP_CFG(GPIO29, AF3) - -/* MMC3 */ -#define GPIO103_MMC3_CLK MFP_CFG(GPIO103, AF2) -#define GPIO105_MMC3_CMD MFP_CFG(GPIO105, AF2) -#define GPIO11_2_MMC3_CLK MFP_CFG(GPIO11_2, AF1) -#define GPIO12_2_MMC3_CMD MFP_CFG(GPIO12_2, AF1) -#define GPIO7_2_MMC3_DAT0 MFP_CFG(GPIO7_2, AF1) -#define GPIO8_2_MMC3_DAT1 MFP_CFG(GPIO8_2, AF1) -#define GPIO9_2_MMC3_DAT2 MFP_CFG(GPIO9_2, AF1) -#define GPIO10_2_MMC3_DAT3 MFP_CFG(GPIO10_2, AF1) - -/* ULPI */ -#define GPIO38_ULPI_CLK MFP_CFG(GPIO38, AF1) -#define GPIO30_ULPI_DATA_OUT_0 MFP_CFG(GPIO30, AF3) -#define GPIO31_ULPI_DATA_OUT_1 MFP_CFG(GPIO31, AF3) -#define GPIO32_ULPI_DATA_OUT_2 MFP_CFG(GPIO32, AF3) -#define GPIO33_ULPI_DATA_OUT_3 MFP_CFG(GPIO33, AF3) -#define GPIO34_ULPI_DATA_OUT_4 MFP_CFG(GPIO34, AF3) -#define GPIO35_ULPI_DATA_OUT_5 MFP_CFG(GPIO35, AF3) -#define GPIO36_ULPI_DATA_OUT_6 MFP_CFG(GPIO36, AF3) -#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3) -#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1) - -#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X) -#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X) -#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X) -#endif /* CONFIG_CPU_PXA310 */ - -#endif /* __ASM_ARCH_MFP_PXA300_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa320.h b/include/asm-arm/arch-pxa/mfp-pxa320.h deleted file mode 100644 index 576aa46d90fc..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa320.h +++ /dev/null @@ -1,447 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa320.h - * - * PXA320 specific MFP configuration definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * 2007-08-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA320_H -#define __ASM_ARCH_MFP_PXA320_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) - -#define GPIO7_2_GPIO MFP_CFG(GPIO7_2, AF0) -#define GPIO8_2_GPIO MFP_CFG(GPIO8_2, AF0) -#define GPIO9_2_GPIO MFP_CFG(GPIO9_2, AF0) -#define GPIO10_2_GPIO MFP_CFG(GPIO10_2, AF0) -#define GPIO11_2_GPIO MFP_CFG(GPIO11_2, AF0) -#define GPIO12_2_GPIO MFP_CFG(GPIO12_2, AF0) -#define GPIO13_2_GPIO MFP_CFG(GPIO13_2, AF0) -#define GPIO14_2_GPIO MFP_CFG(GPIO14_2, AF0) -#define GPIO15_2_GPIO MFP_CFG(GPIO15_2, AF0) -#define GPIO16_2_GPIO MFP_CFG(GPIO16_2, AF0) -#define GPIO17_2_GPIO MFP_CFG(GPIO17_2, AF0) - -/* Chip Select */ -#define GPIO4_nCS3 MFP_CFG(GPIO4, AF1) - -/* AC97 */ -#define GPIO34_AC97_SYSCLK MFP_CFG(GPIO34, AF1) -#define GPIO39_AC97_BITCLK MFP_CFG(GPIO39, AF1) -#define GPIO40_AC97_nACRESET MFP_CFG(GPIO40, AF1) -#define GPIO35_AC97_SDATA_IN_0 MFP_CFG(GPIO35, AF1) -#define GPIO36_AC97_SDATA_IN_1 MFP_CFG(GPIO36, AF1) -#define GPIO32_AC97_SDATA_IN_2 MFP_CFG(GPIO32, AF2) -#define GPIO33_AC97_SDATA_IN_3 MFP_CFG(GPIO33, AF2) -#define GPIO11_AC97_SDATA_IN_2 MFP_CFG(GPIO11, AF3) -#define GPIO12_AC97_SDATA_IN_3 MFP_CFG(GPIO12, AF3) -#define GPIO37_AC97_SDATA_OUT MFP_CFG(GPIO37, AF1) -#define GPIO38_AC97_SYNC MFP_CFG(GPIO38, AF1) - -/* I2C */ -#define GPIO32_I2C_SCL MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH) -#define GPIO33_I2C_SDA MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH) - -/* QCI */ -#define GPIO49_CI_DD_0 MFP_CFG_DRV(GPIO49, AF1, DS04X) -#define GPIO50_CI_DD_1 MFP_CFG_DRV(GPIO50, AF1, DS04X) -#define GPIO51_CI_DD_2 MFP_CFG_DRV(GPIO51, AF1, DS04X) -#define GPIO52_CI_DD_3 MFP_CFG_DRV(GPIO52, AF1, DS04X) -#define GPIO53_CI_DD_4 MFP_CFG_DRV(GPIO53, AF1, DS04X) -#define GPIO54_CI_DD_5 MFP_CFG_DRV(GPIO54, AF1, DS04X) -#define GPIO55_CI_DD_6 MFP_CFG_DRV(GPIO55, AF1, DS04X) -#define GPIO56_CI_DD_7 MFP_CFG_DRV(GPIO56, AF0, DS04X) -#define GPIO57_CI_DD_8 MFP_CFG_DRV(GPIO57, AF1, DS04X) -#define GPIO58_CI_DD_9 MFP_CFG_DRV(GPIO58, AF1, DS04X) -#define GPIO59_CI_MCLK MFP_CFG_DRV(GPIO59, AF0, DS04X) -#define GPIO60_CI_PCLK MFP_CFG_DRV(GPIO60, AF0, DS04X) -#define GPIO61_CI_HSYNC MFP_CFG_DRV(GPIO61, AF0, DS04X) -#define GPIO62_CI_VSYNC MFP_CFG_DRV(GPIO62, AF0, DS04X) - -#define GPIO31_CIR_OUT MFP_CFG(GPIO31, AF5) - -#define GPIO0_2_CLK_EXT MFP_CFG(GPIO0_2, AF3) -#define GPIO0_DRQ MFP_CFG(GPIO0, AF2) -#define GPIO11_EXT_SYNC0 MFP_CFG(GPIO11, AF5) -#define GPIO12_EXT_SYNC1 MFP_CFG(GPIO12, AF6) -#define GPIO0_2_HZ_CLK MFP_CFG(GPIO0_2, AF1) -#define GPIO14_HZ_CLK MFP_CFG(GPIO14, AF4) -#define GPIO30_ICP_RXD MFP_CFG(GPIO30, AF1) -#define GPIO31_ICP_TXD MFP_CFG(GPIO31, AF1) - -#define GPIO83_KP_DKIN_0 MFP_CFG_LPM(GPIO83, AF3, FLOAT) -#define GPIO84_KP_DKIN_1 MFP_CFG_LPM(GPIO84, AF3, FLOAT) -#define GPIO85_KP_DKIN_2 MFP_CFG_LPM(GPIO85, AF3, FLOAT) -#define GPIO86_KP_DKIN_3 MFP_CFG_LPM(GPIO86, AF3, FLOAT) - -#define GPIO105_KP_DKIN_0 MFP_CFG_LPM(GPIO105, AF2, FLOAT) -#define GPIO106_KP_DKIN_1 MFP_CFG_LPM(GPIO106, AF2, FLOAT) -#define GPIO107_KP_DKIN_2 MFP_CFG_LPM(GPIO107, AF2, FLOAT) -#define GPIO108_KP_DKIN_3 MFP_CFG_LPM(GPIO108, AF2, FLOAT) -#define GPIO109_KP_DKIN_4 MFP_CFG_LPM(GPIO109, AF2, FLOAT) -#define GPIO110_KP_DKIN_5 MFP_CFG_LPM(GPIO110, AF2, FLOAT) -#define GPIO111_KP_DKIN_6 MFP_CFG_LPM(GPIO111, AF2, FLOAT) -#define GPIO112_KP_DKIN_7 MFP_CFG_LPM(GPIO112, AF2, FLOAT) - -#define GPIO113_KP_DKIN_0 MFP_CFG_LPM(GPIO113, AF2, FLOAT) -#define GPIO114_KP_DKIN_1 MFP_CFG_LPM(GPIO114, AF2, FLOAT) -#define GPIO115_KP_DKIN_2 MFP_CFG_LPM(GPIO115, AF2, FLOAT) -#define GPIO116_KP_DKIN_3 MFP_CFG_LPM(GPIO116, AF2, FLOAT) -#define GPIO117_KP_DKIN_4 MFP_CFG_LPM(GPIO117, AF2, FLOAT) -#define GPIO118_KP_DKIN_5 MFP_CFG_LPM(GPIO118, AF2, FLOAT) -#define GPIO119_KP_DKIN_6 MFP_CFG_LPM(GPIO119, AF2, FLOAT) -#define GPIO120_KP_DKIN_7 MFP_CFG_LPM(GPIO120, AF2, FLOAT) - -#define GPIO127_KP_DKIN_0 MFP_CFG_LPM(GPIO127, AF2, FLOAT) -#define GPIO126_KP_DKIN_1 MFP_CFG_LPM(GPIO126, AF2, FLOAT) - -#define GPIO2_2_KP_DKIN_0 MFP_CFG_LPM(GPIO2_2, AF2, FLOAT) -#define GPIO3_2_KP_DKIN_1 MFP_CFG_LPM(GPIO3_2, AF2, FLOAT) -#define GPIO125_KP_DKIN_2 MFP_CFG_LPM(GPIO125, AF2, FLOAT) -#define GPIO124_KP_DKIN_3 MFP_CFG_LPM(GPIO124, AF2, FLOAT) -#define GPIO123_KP_DKIN_4 MFP_CFG_LPM(GPIO123, AF2, FLOAT) -#define GPIO122_KP_DKIN_5 MFP_CFG_LPM(GPIO122, AF2, FLOAT) -#define GPIO121_KP_DKIN_6 MFP_CFG_LPM(GPIO121, AF2, FLOAT) -#define GPIO4_2_KP_DKIN_7 MFP_CFG_LPM(GPIO4_2, AF2, FLOAT) - -#define GPIO113_KP_MKIN_0 MFP_CFG_LPM(GPIO113, AF1, FLOAT) -#define GPIO114_KP_MKIN_1 MFP_CFG_LPM(GPIO114, AF1, FLOAT) -#define GPIO115_KP_MKIN_2 MFP_CFG_LPM(GPIO115, AF1, FLOAT) -#define GPIO116_KP_MKIN_3 MFP_CFG_LPM(GPIO116, AF1, FLOAT) -#define GPIO117_KP_MKIN_4 MFP_CFG_LPM(GPIO117, AF1, FLOAT) -#define GPIO118_KP_MKIN_5 MFP_CFG_LPM(GPIO118, AF1, FLOAT) -#define GPIO119_KP_MKIN_6 MFP_CFG_LPM(GPIO119, AF1, FLOAT) -#define GPIO120_KP_MKIN_7 MFP_CFG_LPM(GPIO120, AF1, FLOAT) - -#define GPIO83_KP_MKOUT_0 MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH) -#define GPIO84_KP_MKOUT_1 MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH) -#define GPIO85_KP_MKOUT_2 MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH) -#define GPIO86_KP_MKOUT_3 MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_4 MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH) -#define GPIO14_KP_MKOUT_5 MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH) - -#define GPIO121_KP_MKOUT_0 MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH) -#define GPIO122_KP_MKOUT_1 MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH) -#define GPIO123_KP_MKOUT_2 MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH) -#define GPIO124_KP_MKOUT_3 MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH) -#define GPIO125_KP_MKOUT_4 MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH) -#define GPIO126_KP_MKOUT_5 MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH) -#define GPIO127_KP_MKOUT_6 MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH) -#define GPIO5_2_KP_MKOUT_7 MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH) - -/* LCD */ -#define GPIO6_2_LCD_LDD_0 MFP_CFG_DRV(GPIO6_2, AF1, DS01X) -#define GPIO7_2_LCD_LDD_1 MFP_CFG_DRV(GPIO7_2, AF1, DS01X) -#define GPIO8_2_LCD_LDD_2 MFP_CFG_DRV(GPIO8_2, AF1, DS01X) -#define GPIO9_2_LCD_LDD_3 MFP_CFG_DRV(GPIO9_2, AF1, DS01X) -#define GPIO10_2_LCD_LDD_4 MFP_CFG_DRV(GPIO10_2, AF1, DS01X) -#define GPIO11_2_LCD_LDD_5 MFP_CFG_DRV(GPIO11_2, AF1, DS01X) -#define GPIO12_2_LCD_LDD_6 MFP_CFG_DRV(GPIO12_2, AF1, DS01X) -#define GPIO13_2_LCD_LDD_7 MFP_CFG_DRV(GPIO13_2, AF1, DS01X) -#define GPIO63_LCD_LDD_8 MFP_CFG_DRV(GPIO63, AF1, DS01X) -#define GPIO64_LCD_LDD_9 MFP_CFG_DRV(GPIO64, AF1, DS01X) -#define GPIO65_LCD_LDD_10 MFP_CFG_DRV(GPIO65, AF1, DS01X) -#define GPIO66_LCD_LDD_11 MFP_CFG_DRV(GPIO66, AF1, DS01X) -#define GPIO67_LCD_LDD_12 MFP_CFG_DRV(GPIO67, AF1, DS01X) -#define GPIO68_LCD_LDD_13 MFP_CFG_DRV(GPIO68, AF1, DS01X) -#define GPIO69_LCD_LDD_14 MFP_CFG_DRV(GPIO69, AF1, DS01X) -#define GPIO70_LCD_LDD_15 MFP_CFG_DRV(GPIO70, AF1, DS01X) -#define GPIO71_LCD_LDD_16 MFP_CFG_DRV(GPIO71, AF1, DS01X) -#define GPIO72_LCD_LDD_17 MFP_CFG_DRV(GPIO72, AF1, DS01X) -#define GPIO73_LCD_CS_N MFP_CFG_DRV(GPIO73, AF2, DS01X) -#define GPIO74_LCD_VSYNC MFP_CFG_DRV(GPIO74, AF2, DS01X) -#define GPIO14_2_LCD_FCLK MFP_CFG_DRV(GPIO14_2, AF1, DS01X) -#define GPIO15_2_LCD_LCLK MFP_CFG_DRV(GPIO15_2, AF1, DS01X) -#define GPIO16_2_LCD_PCLK MFP_CFG_DRV(GPIO16_2, AF1, DS01X) -#define GPIO17_2_LCD_BIAS MFP_CFG_DRV(GPIO17_2, AF1, DS01X) -#define GPIO64_LCD_VSYNC MFP_CFG_DRV(GPIO64, AF2, DS01X) -#define GPIO63_LCD_CS_N MFP_CFG_DRV(GPIO63, AF2, DS01X) - -#define GPIO6_2_MLCD_DD_0 MFP_CFG_DRV(GPIO6_2, AF7, DS08X) -#define GPIO7_2_MLCD_DD_1 MFP_CFG_DRV(GPIO7_2, AF7, DS08X) -#define GPIO8_2_MLCD_DD_2 MFP_CFG_DRV(GPIO8_2, AF7, DS08X) -#define GPIO9_2_MLCD_DD_3 MFP_CFG_DRV(GPIO9_2, AF7, DS08X) -#define GPIO10_2_MLCD_DD_4 MFP_CFG_DRV(GPIO10_2, AF7, DS08X) -#define GPIO11_2_MLCD_DD_5 MFP_CFG_DRV(GPIO11_2, AF7, DS08X) -#define GPIO12_2_MLCD_DD_6 MFP_CFG_DRV(GPIO12_2, AF7, DS08X) -#define GPIO13_2_MLCD_DD_7 MFP_CFG_DRV(GPIO13_2, AF7, DS08X) -#define GPIO63_MLCD_DD_8 MFP_CFG_DRV(GPIO63, AF7, DS08X) -#define GPIO64_MLCD_DD_9 MFP_CFG_DRV(GPIO64, AF7, DS08X) -#define GPIO65_MLCD_DD_10 MFP_CFG_DRV(GPIO65, AF7, DS08X) -#define GPIO66_MLCD_DD_11 MFP_CFG_DRV(GPIO66, AF7, DS08X) -#define GPIO67_MLCD_DD_12 MFP_CFG_DRV(GPIO67, AF7, DS08X) -#define GPIO68_MLCD_DD_13 MFP_CFG_DRV(GPIO68, AF7, DS08X) -#define GPIO69_MLCD_DD_14 MFP_CFG_DRV(GPIO69, AF7, DS08X) -#define GPIO70_MLCD_DD_15 MFP_CFG_DRV(GPIO70, AF7, DS08X) -#define GPIO71_MLCD_DD_16 MFP_CFG_DRV(GPIO71, AF7, DS08X) -#define GPIO72_MLCD_DD_17 MFP_CFG_DRV(GPIO72, AF7, DS08X) -#define GPIO73_MLCD_CS MFP_CFG_DRV(GPIO73, AF7, DS08X) -#define GPIO74_MLCD_VSYNC MFP_CFG_DRV(GPIO74, AF7, DS08X) -#define GPIO14_2_MLCD_FCLK MFP_CFG_DRV(GPIO14_2, AF7, DS08X) -#define GPIO15_2_MLCD_LCLK MFP_CFG_DRV(GPIO15_2, AF7, DS08X) -#define GPIO16_2_MLCD_PCLK MFP_CFG_DRV(GPIO16_2, AF7, DS08X) -#define GPIO17_2_MLCD_BIAS MFP_CFG_DRV(GPIO17_2, AF7, DS08X) - -/* MMC1 */ -#define GPIO9_MMC1_CMD MFP_CFG_LPM(GPIO9, AF4, DRIVE_HIGH) -#define GPIO22_MMC1_CLK MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH) -#define GPIO23_MMC1_CMD MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH) -#define GPIO30_MMC1_CLK MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH) -#define GPIO31_MMC1_CMD MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH) -#define GPIO5_MMC1_DAT0 MFP_CFG_LPM(GPIO5, AF4, DRIVE_HIGH) -#define GPIO6_MMC1_DAT1 MFP_CFG_LPM(GPIO6, AF4, DRIVE_HIGH) -#define GPIO7_MMC1_DAT2 MFP_CFG_LPM(GPIO7, AF4, DRIVE_HIGH) -#define GPIO8_MMC1_DAT3 MFP_CFG_LPM(GPIO8, AF4, DRIVE_HIGH) -#define GPIO18_MMC1_DAT0 MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH) -#define GPIO19_MMC1_DAT1 MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH) -#define GPIO20_MMC1_DAT2 MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH) -#define GPIO21_MMC1_DAT3 MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH) - -#define GPIO28_MMC2_CLK MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH) -#define GPIO29_MMC2_CMD MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH) -#define GPIO30_MMC2_CLK MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH) -#define GPIO31_MMC2_CMD MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH) -#define GPIO79_MMC2_CLK MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH) -#define GPIO80_MMC2_CMD MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH) - -#define GPIO5_MMC2_DAT0 MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH) -#define GPIO6_MMC2_DAT1 MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH) -#define GPIO7_MMC2_DAT2 MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH) -#define GPIO8_MMC2_DAT3 MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH) -#define GPIO24_MMC2_DAT0 MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH) -#define GPIO75_MMC2_DAT0 MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH) -#define GPIO25_MMC2_DAT1 MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH) -#define GPIO76_MMC2_DAT1 MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH) -#define GPIO26_MMC2_DAT2 MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH) -#define GPIO77_MMC2_DAT2 MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH) -#define GPIO27_MMC2_DAT3 MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH) -#define GPIO78_MMC2_DAT3 MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH) - -/* 1-Wire */ -#define GPIO14_ONE_WIRE MFP_CFG_LPM(GPIO14, AF5, FLOAT) -#define GPIO0_2_ONE_WIRE MFP_CFG_LPM(GPIO0_2, AF2, FLOAT) - -/* SSP1 */ -#define GPIO87_SSP1_EXTCLK MFP_CFG(GPIO87, AF1) -#define GPIO88_SSP1_SYSCLK MFP_CFG(GPIO88, AF1) -#define GPIO83_SSP1_SCLK MFP_CFG(GPIO83, AF1) -#define GPIO84_SSP1_SFRM MFP_CFG(GPIO84, AF1) -#define GPIO85_SSP1_RXD MFP_CFG(GPIO85, AF6) -#define GPIO85_SSP1_TXD MFP_CFG(GPIO85, AF1) -#define GPIO86_SSP1_RXD MFP_CFG(GPIO86, AF1) -#define GPIO86_SSP1_TXD MFP_CFG(GPIO86, AF6) - -/* SSP2 */ -#define GPIO39_SSP2_EXTCLK MFP_CFG(GPIO39, AF2) -#define GPIO40_SSP2_SYSCLK MFP_CFG(GPIO40, AF2) -#define GPIO12_SSP2_SCLK MFP_CFG(GPIO12, AF2) -#define GPIO35_SSP2_SCLK MFP_CFG(GPIO35, AF2) -#define GPIO36_SSP2_SFRM MFP_CFG(GPIO36, AF2) -#define GPIO37_SSP2_RXD MFP_CFG(GPIO37, AF5) -#define GPIO37_SSP2_TXD MFP_CFG(GPIO37, AF2) -#define GPIO38_SSP2_RXD MFP_CFG(GPIO38, AF2) -#define GPIO38_SSP2_TXD MFP_CFG(GPIO38, AF5) - -#define GPIO69_SSP3_SCLK MFP_CFG(GPIO69, AF2, DS08X, FLOAT) -#define GPIO70_SSP3_FRM MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW) -#define GPIO89_SSP3_SCLK MFP_CFG(GPIO89, AF1, DS08X, FLOAT) -#define GPIO90_SSP3_FRM MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW) -#define GPIO71_SSP3_RXD MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT) -#define GPIO71_SSP3_TXD MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW) -#define GPIO72_SSP3_RXD MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT) -#define GPIO72_SSP3_TXD MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW) -#define GPIO91_SSP3_RXD MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT) -#define GPIO91_SSP3_TXD MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW) -#define GPIO92_SSP3_RXD MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT) -#define GPIO92_SSP3_TXD MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW) - -#define GPIO93_SSP4_SCLK MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH) -#define GPIO94_SSP4_FRM MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH) -#define GPIO94_SSP4_RXD MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH) -#define GPIO95_SSP4_RXD MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH) -#define GPIO95_SSP4_TXD MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_SSP4_RXD MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) -#define GPIO96_SSP4_TXD MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH) - -/* UART1 */ -#define GPIO41_UART1_RXD MFP_CFG_LPM(GPIO41, AF2, FLOAT) -#define GPIO41_UART1_TXD MFP_CFG_LPM(GPIO41, AF4, FLOAT) -#define GPIO42_UART1_RXD MFP_CFG_LPM(GPIO42, AF4, FLOAT) -#define GPIO42_UART1_TXD MFP_CFG_LPM(GPIO42, AF2, FLOAT) -#define GPIO97_UART1_RXD MFP_CFG_LPM(GPIO97, AF1, FLOAT) -#define GPIO97_UART1_TXD MFP_CFG_LPM(GPIO97, AF6, FLOAT) -#define GPIO98_UART1_RXD MFP_CFG_LPM(GPIO98, AF6, FLOAT) -#define GPIO98_UART1_TXD MFP_CFG_LPM(GPIO98, AF1, FLOAT) -#define GPIO43_UART1_CTS MFP_CFG_LPM(GPIO43, AF2, FLOAT) -#define GPIO43_UART1_RTS MFP_CFG_LPM(GPIO43, AF4, FLOAT) -#define GPIO48_UART1_CTS MFP_CFG_LPM(GPIO48, AF4, FLOAT) -#define GPIO48_UART1_RTS MFP_CFG_LPM(GPIO48, AF2, FLOAT) -#define GPIO99_UART1_CTS MFP_CFG_LPM(GPIO99, AF1, FLOAT) -#define GPIO99_UART1_RTS MFP_CFG_LPM(GPIO99, AF6, FLOAT) -#define GPIO104_UART1_CTS MFP_CFG_LPM(GPIO104, AF6, FLOAT) -#define GPIO104_UART1_RTS MFP_CFG_LPM(GPIO104, AF1, FLOAT) -#define GPIO45_UART1_DTR MFP_CFG_LPM(GPIO45, AF4, FLOAT) -#define GPIO45_UART1_DSR MFP_CFG_LPM(GPIO45, AF2, FLOAT) -#define GPIO47_UART1_DTR MFP_CFG_LPM(GPIO47, AF2, FLOAT) -#define GPIO47_UART1_DSR MFP_CFG_LPM(GPIO47, AF4, FLOAT) -#define GPIO101_UART1_DTR MFP_CFG_LPM(GPIO101, AF6, FLOAT) -#define GPIO101_UART1_DSR MFP_CFG_LPM(GPIO101, AF1, FLOAT) -#define GPIO103_UART1_DTR MFP_CFG_LPM(GPIO103, AF1, FLOAT) -#define GPIO103_UART1_DSR MFP_CFG_LPM(GPIO103, AF6, FLOAT) -#define GPIO44_UART1_DCD MFP_CFG_LPM(GPIO44, AF2, FLOAT) -#define GPIO100_UART1_DCD MFP_CFG_LPM(GPIO100, AF1, FLOAT) -#define GPIO46_UART1_RI MFP_CFG_LPM(GPIO46, AF2, FLOAT) -#define GPIO102_UART1_RI MFP_CFG_LPM(GPIO102, AF1, FLOAT) - -/* UART2 */ -#define GPIO109_UART2_CTS MFP_CFG_LPM(GPIO109, AF3, FLOAT) -#define GPIO109_UART2_RTS MFP_CFG_LPM(GPIO109, AF1, FLOAT) -#define GPIO112_UART2_CTS MFP_CFG_LPM(GPIO112, AF1, FLOAT) -#define GPIO112_UART2_RTS MFP_CFG_LPM(GPIO112, AF3, FLOAT) -#define GPIO110_UART2_RXD MFP_CFG_LPM(GPIO110, AF1, FLOAT) -#define GPIO110_UART2_TXD MFP_CFG_LPM(GPIO110, AF3, FLOAT) -#define GPIO111_UART2_RXD MFP_CFG_LPM(GPIO111, AF3, FLOAT) -#define GPIO111_UART2_TXD MFP_CFG_LPM(GPIO111, AF1, FLOAT) - -/* UART3 */ -#define GPIO89_UART3_CTS MFP_CFG_LPM(GPIO89, AF2, FLOAT) -#define GPIO89_UART3_RTS MFP_CFG_LPM(GPIO89, AF4, FLOAT) -#define GPIO90_UART3_CTS MFP_CFG_LPM(GPIO90, AF4, FLOAT) -#define GPIO90_UART3_RTS MFP_CFG_LPM(GPIO90, AF2, FLOAT) -#define GPIO105_UART3_CTS MFP_CFG_LPM(GPIO105, AF1, FLOAT) -#define GPIO105_UART3_RTS MFP_CFG_LPM(GPIO105, AF3, FLOAT) -#define GPIO106_UART3_CTS MFP_CFG_LPM(GPIO106, AF3, FLOAT) -#define GPIO106_UART3_RTS MFP_CFG_LPM(GPIO106, AF1, FLOAT) -#define GPIO30_UART3_RXD MFP_CFG_LPM(GPIO30, AF2, FLOAT) -#define GPIO30_UART3_TXD MFP_CFG_LPM(GPIO30, AF6, FLOAT) -#define GPIO31_UART3_RXD MFP_CFG_LPM(GPIO31, AF6, FLOAT) -#define GPIO31_UART3_TXD MFP_CFG_LPM(GPIO31, AF2, FLOAT) -#define GPIO91_UART3_RXD MFP_CFG_LPM(GPIO91, AF4, FLOAT) -#define GPIO91_UART3_TXD MFP_CFG_LPM(GPIO91, AF2, FLOAT) -#define GPIO92_UART3_RXD MFP_CFG_LPM(GPIO92, AF2, FLOAT) -#define GPIO92_UART3_TXD MFP_CFG_LPM(GPIO92, AF4, FLOAT) -#define GPIO107_UART3_RXD MFP_CFG_LPM(GPIO107, AF3, FLOAT) -#define GPIO107_UART3_TXD MFP_CFG_LPM(GPIO107, AF1, FLOAT) -#define GPIO108_UART3_RXD MFP_CFG_LPM(GPIO108, AF1, FLOAT) -#define GPIO108_UART3_TXD MFP_CFG_LPM(GPIO108, AF3, FLOAT) - - -/* USB 2.0 UTMI */ -#define GPIO10_UTM_CLK MFP_CFG(GPIO10, AF1) -#define GPIO36_U2D_RXERROR MFP_CFG(GPIO36, AF3) -#define GPIO60_U2D_RXERROR MFP_CFG(GPIO60, AF1) -#define GPIO87_U2D_RXERROR MFP_CFG(GPIO87, AF5) -#define GPIO34_UTM_RXVALID MFP_CFG(GPIO34, AF3) -#define GPIO58_UTM_RXVALID MFP_CFG(GPIO58, AF2) -#define GPIO85_UTM_RXVALID MFP_CFG(GPIO85, AF5) -#define GPIO35_UTM_RXACTIVE MFP_CFG(GPIO35, AF3) -#define GPIO59_UTM_RXACTIVE MFP_CFG(GPIO59, AF1) -#define GPIO86_UTM_RXACTIVE MFP_CFG(GPIO86, AF5) -#define GPIO73_UTM_TXREADY MFP_CFG(GPIO73, AF1) -#define GPIO68_UTM_LINESTATE_0 MFP_CFG(GPIO68, AF3) -#define GPIO90_UTM_LINESTATE_0 MFP_CFG(GPIO90, AF3) -#define GPIO102_UTM_LINESTATE_0 MFP_CFG(GPIO102, AF3) -#define GPIO107_UTM_LINESTATE_0 MFP_CFG(GPIO107, AF4) -#define GPIO69_UTM_LINESTATE_1 MFP_CFG(GPIO69, AF3) -#define GPIO91_UTM_LINESTATE_1 MFP_CFG(GPIO91, AF3) -#define GPIO103_UTM_LINESTATE_1 MFP_CFG(GPIO103, AF3) - -#define GPIO41_U2D_PHYDATA_0 MFP_CFG(GPIO41, AF3) -#define GPIO42_U2D_PHYDATA_1 MFP_CFG(GPIO42, AF3) -#define GPIO43_U2D_PHYDATA_2 MFP_CFG(GPIO43, AF3) -#define GPIO44_U2D_PHYDATA_3 MFP_CFG(GPIO44, AF3) -#define GPIO45_U2D_PHYDATA_4 MFP_CFG(GPIO45, AF3) -#define GPIO46_U2D_PHYDATA_5 MFP_CFG(GPIO46, AF3) -#define GPIO47_U2D_PHYDATA_6 MFP_CFG(GPIO47, AF3) -#define GPIO48_U2D_PHYDATA_7 MFP_CFG(GPIO48, AF3) - -#define GPIO49_U2D_PHYDATA_0 MFP_CFG(GPIO49, AF3) -#define GPIO50_U2D_PHYDATA_1 MFP_CFG(GPIO50, AF3) -#define GPIO51_U2D_PHYDATA_2 MFP_CFG(GPIO51, AF3) -#define GPIO52_U2D_PHYDATA_3 MFP_CFG(GPIO52, AF3) -#define GPIO53_U2D_PHYDATA_4 MFP_CFG(GPIO53, AF3) -#define GPIO54_U2D_PHYDATA_5 MFP_CFG(GPIO54, AF3) -#define GPIO55_U2D_PHYDATA_6 MFP_CFG(GPIO55, AF3) -#define GPIO56_U2D_PHYDATA_7 MFP_CFG(GPIO56, AF3) - -#define GPIO37_U2D_OPMODE0 MFP_CFG(GPIO37, AF4) -#define GPIO61_U2D_OPMODE0 MFP_CFG(GPIO61, AF2) -#define GPIO88_U2D_OPMODE0 MFP_CFG(GPIO88, AF7) - -#define GPIO38_U2D_OPMODE1 MFP_CFG(GPIO38, AF4) -#define GPIO62_U2D_OPMODE1 MFP_CFG(GPIO62, AF2) -#define GPIO104_U2D_OPMODE1 MFP_CFG(GPIO104, AF4) -#define GPIO108_U2D_OPMODE1 MFP_CFG(GPIO108, AF5) - -#define GPIO74_U2D_RESET MFP_CFG(GPIO74, AF1) -#define GPIO93_U2D_RESET MFP_CFG(GPIO93, AF2) -#define GPIO98_U2D_RESET MFP_CFG(GPIO98, AF3) - -#define GPIO67_U2D_SUSPEND MFP_CFG(GPIO67, AF3) -#define GPIO96_U2D_SUSPEND MFP_CFG(GPIO96, AF2) -#define GPIO101_U2D_SUSPEND MFP_CFG(GPIO101, AF3) - -#define GPIO66_U2D_TERM_SEL MFP_CFG(GPIO66, AF5) -#define GPIO95_U2D_TERM_SEL MFP_CFG(GPIO95, AF3) -#define GPIO97_U2D_TERM_SEL MFP_CFG(GPIO97, AF7) -#define GPIO100_U2D_TERM_SEL MFP_CFG(GPIO100, AF5) - -#define GPIO39_U2D_TXVALID MFP_CFG(GPIO39, AF4) -#define GPIO70_U2D_TXVALID MFP_CFG(GPIO70, AF5) -#define GPIO83_U2D_TXVALID MFP_CFG(GPIO83, AF7) - -#define GPIO65_U2D_XCVR_SEL MFP_CFG(GPIO65, AF5) -#define GPIO94_U2D_XCVR_SEL MFP_CFG(GPIO94, AF3) -#define GPIO99_U2D_XCVR_SEL MFP_CFG(GPIO99, AF5) - -/* USB Host 1.1 */ -#define GPIO2_2_USBH_PEN MFP_CFG(GPIO2_2, AF1) -#define GPIO3_2_USBH_PWR MFP_CFG(GPIO3_2, AF1) - -/* USB P2 */ -#define GPIO97_USB_P2_2 MFP_CFG(GPIO97, AF2) -#define GPIO97_USB_P2_6 MFP_CFG(GPIO97, AF4) -#define GPIO98_USB_P2_2 MFP_CFG(GPIO98, AF4) -#define GPIO98_USB_P2_6 MFP_CFG(GPIO98, AF2) -#define GPIO99_USB_P2_1 MFP_CFG(GPIO99, AF2) -#define GPIO100_USB_P2_4 MFP_CFG(GPIO100, AF2) -#define GPIO101_USB_P2_8 MFP_CFG(GPIO101, AF2) -#define GPIO102_USB_P2_3 MFP_CFG(GPIO102, AF2) -#define GPIO103_USB_P2_5 MFP_CFG(GPIO103, AF2) -#define GPIO104_USB_P2_7 MFP_CFG(GPIO104, AF2) - -/* USB P3 */ -#define GPIO75_USB_P3_1 MFP_CFG(GPIO75, AF2) -#define GPIO76_USB_P3_2 MFP_CFG(GPIO76, AF2) -#define GPIO77_USB_P3_3 MFP_CFG(GPIO77, AF2) -#define GPIO78_USB_P3_4 MFP_CFG(GPIO78, AF2) -#define GPIO79_USB_P3_5 MFP_CFG(GPIO79, AF2) -#define GPIO80_USB_P3_6 MFP_CFG(GPIO80, AF2) - -#define GPIO13_CHOUT0 MFP_CFG(GPIO13, AF6) -#define GPIO14_CHOUT1 MFP_CFG(GPIO14, AF6) - -#define GPIO2_RDY MFP_CFG(GPIO2, AF1) -#define GPIO5_NPIOR MFP_CFG(GPIO5, AF3) - -#define GPIO11_PWM0_OUT MFP_CFG(GPIO11, AF1) -#define GPIO12_PWM1_OUT MFP_CFG(GPIO12, AF1) -#define GPIO13_PWM2_OUT MFP_CFG(GPIO13, AF1) -#define GPIO14_PWM3_OUT MFP_CFG(GPIO14, AF1) - -#endif /* __ASM_ARCH_MFP_PXA320_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa3xx.h b/include/asm-arm/arch-pxa/mfp-pxa3xx.h deleted file mode 100644 index 1f6b35c015d0..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa3xx.h +++ /dev/null @@ -1,252 +0,0 @@ -#ifndef __ASM_ARCH_MFP_PXA3XX_H -#define __ASM_ARCH_MFP_PXA3XX_H - -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) - -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) - -/* PXA3xx common MFP configurations - processor specific ones defined - * in mfp-pxa300.h and mfp-pxa320.h - */ -#define GPIO0_GPIO MFP_CFG(GPIO0, AF0) -#define GPIO1_GPIO MFP_CFG(GPIO1, AF0) -#define GPIO2_GPIO MFP_CFG(GPIO2, AF0) -#define GPIO3_GPIO MFP_CFG(GPIO3, AF0) -#define GPIO4_GPIO MFP_CFG(GPIO4, AF0) -#define GPIO5_GPIO MFP_CFG(GPIO5, AF0) -#define GPIO6_GPIO MFP_CFG(GPIO6, AF0) -#define GPIO7_GPIO MFP_CFG(GPIO7, AF0) -#define GPIO8_GPIO MFP_CFG(GPIO8, AF0) -#define GPIO9_GPIO MFP_CFG(GPIO9, AF0) -#define GPIO10_GPIO MFP_CFG(GPIO10, AF0) -#define GPIO11_GPIO MFP_CFG(GPIO11, AF0) -#define GPIO12_GPIO MFP_CFG(GPIO12, AF0) -#define GPIO13_GPIO MFP_CFG(GPIO13, AF0) -#define GPIO14_GPIO MFP_CFG(GPIO14, AF0) -#define GPIO15_GPIO MFP_CFG(GPIO15, AF0) -#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) -#define GPIO17_GPIO MFP_CFG(GPIO17, AF0) -#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) -#define GPIO19_GPIO MFP_CFG(GPIO19, AF0) -#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) -#define GPIO21_GPIO MFP_CFG(GPIO21, AF0) -#define GPIO22_GPIO MFP_CFG(GPIO22, AF0) -#define GPIO23_GPIO MFP_CFG(GPIO23, AF0) -#define GPIO24_GPIO MFP_CFG(GPIO24, AF0) -#define GPIO25_GPIO MFP_CFG(GPIO25, AF0) -#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) -#define GPIO27_GPIO MFP_CFG(GPIO27, AF0) -#define GPIO28_GPIO MFP_CFG(GPIO28, AF0) -#define GPIO29_GPIO MFP_CFG(GPIO29, AF0) -#define GPIO30_GPIO MFP_CFG(GPIO30, AF0) -#define GPIO31_GPIO MFP_CFG(GPIO31, AF0) -#define GPIO32_GPIO MFP_CFG(GPIO32, AF0) -#define GPIO33_GPIO MFP_CFG(GPIO33, AF0) -#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) -#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) -#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) -#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) -#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) -#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) -#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) -#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) -#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) -#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) -#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) -#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) - -#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) -#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) - -#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) -#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) -#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) - -#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) - -#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) -#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) -#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) -#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) -#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) -#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) -#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) -#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) -#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) -#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) -#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) -#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) -#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) -#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) -#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) -#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) -#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) -#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) -#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) -#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) -#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) -#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) -#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) -#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) -#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) -#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) -#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) -#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) -#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) -#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) -#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) -#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) -#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) -#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) -#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) -#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) -#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) -#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) -#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) -#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) -#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) -#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) -#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) -#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) -#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) -#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) -#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) -#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) -#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) -#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) -#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) -#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) -#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) -#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) -#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) -#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) -#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) -#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) -#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) -#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) -#define GPIO123_GPIO MFP_CFG(GPIO123, AF0) -#define GPIO124_GPIO MFP_CFG(GPIO124, AF0) -#define GPIO125_GPIO MFP_CFG(GPIO125, AF0) -#define GPIO126_GPIO MFP_CFG(GPIO126, AF0) -#define GPIO127_GPIO MFP_CFG(GPIO127, AF0) - -#define GPIO0_2_GPIO MFP_CFG(GPIO0_2, AF0) -#define GPIO1_2_GPIO MFP_CFG(GPIO1_2, AF0) -#define GPIO2_2_GPIO MFP_CFG(GPIO2_2, AF0) -#define GPIO3_2_GPIO MFP_CFG(GPIO3_2, AF0) -#define GPIO4_2_GPIO MFP_CFG(GPIO4_2, AF0) -#define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) -#define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) - -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code - */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); -#endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h deleted file mode 100644 index c4e945ab1923..000000000000 --- a/include/asm-arm/arch-pxa/mfp-pxa930.h +++ /dev/null @@ -1,491 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp-pxa930.h - * - * PXA930 specific MFP configuration definitions - * - * Copyright (C) 2007-2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_PXA9xx_H -#define __ASM_ARCH_MFP_PXA9xx_H - -#include -#include - -/* GPIO */ -#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) -#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) -#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) -#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) -#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) -#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) -#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) -#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) -#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) -#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) -#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) - -#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0) -#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0) -#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0) -#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0) - -#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0) -#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0) -#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0) -#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0) -#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0) -#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0) -#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0) -#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0) -#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0) -#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0) -#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0) -#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0) -#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0) -#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0) -#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0) -#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0) -#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0) -#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0) -#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0) -#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0) -#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0) -#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0) -#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0) -#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0) -#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0) - -#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0) -#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0) -#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0) -#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0) -#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0) -#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0) -#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0) -#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) -#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) -#define RDY_GPIO_62 MFP_CFG(RDY, AF0) - -/* Chip Select */ -#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) -#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH) - -/* AC97 */ -#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3) -#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3) -#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3) -#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3) -#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3) -#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3) - -/* I2C */ -#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH) -#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH) - -#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH) -#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH) - -#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) -#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) - -#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) -#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) - -#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH) -#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH) - -#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) -#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) - -#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH) -#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH) - -/* QCI */ -#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW) -#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW) -#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW) -#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW) -#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW) -#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW) -#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW) -#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW) -#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW) -#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW) -#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW) -#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW) -#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW) -#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW) - -/* KEYPAD */ -#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT) -#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT) -#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT) -#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT) -#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) -#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT) -#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT) -#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT) - -#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT) -#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT) -#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT) -#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT) - -#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT) -#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT) -#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT) -#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT) -#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT) -#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT) - -#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT) -#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT) -#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT) -#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT) -#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT) -#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT) -#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT) -#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1) -#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4) - -#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH) -#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH) -#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH) -#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) -#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH) -#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH) -#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH) -#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH) -#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH) - -/* LCD */ -#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1) -#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1) -#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1) -#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1) -#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1) -#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2) -#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1) -#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1) -#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1) -#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1) -#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1) -#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1) -#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1) -#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1) -#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1) -#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1) -#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1) -#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1) -#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1) -#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1) -#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1) -#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1) -#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1) -#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1) -#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1) -#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3) -#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3) -#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1) - -/* Mini-LCD */ -#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3) -#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3) -#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3) -#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3) -#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3) -#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3) -#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3) -#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3) -#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3) -#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3) -#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3) -#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3) -#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3) -#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3) -#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3) -#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3) -#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3) -#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3) -#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3) -#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3) -#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5) - -/* MMC1 */ -#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4) -#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4) -#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4) -#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4) -#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4) -#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4) -#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3) -#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3) -#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3) -#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3) -#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3) -#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3) - -#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2) -#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2) -#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2) -#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3) -#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2) - -/* MMC2 */ -#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7) -#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7) -#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7) -#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7) -#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7) -#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7) - -#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1) -#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1) -#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1) -#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1) -#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1) -#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1) - -#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3) -#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3) -#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3) -#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3) -#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3) -#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3) - -/* BSSP1 */ -#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3) -#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3) -#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3) -#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3) -#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5) -#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5) - -/* BSSP2 */ -#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1) -#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1) -#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1) -#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1) -#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1) -#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4) - -/* BSSP3 */ -#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1) -#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1) -#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1) -#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1) -#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1) - -/* BSSP4 */ -#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4) -#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4) -#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4) -#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4) - -#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4) -#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4) -#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4) -#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4) - -/* GSSP1 */ -#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2) -#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2) -#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2) -#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2) -#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2) - -#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4) -#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4) -#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4) -#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4) - -/* GSSP2 */ -#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4) -#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4) -#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4) -#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4) - -#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4) -#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4) -#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4) -#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4) - -#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2) -#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2) -#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2) -#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2) -#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2) -#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5) - -#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2) -#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2) -#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2) -#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2) - -/* UART1 - FFUART */ -#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1) -#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1) -#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1) -#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1) -#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1) -#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1) -#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1) -#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1) - -#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2) -#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2) -#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2) -#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2) -#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2) -#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2) -#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) -#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) - -/* UART2 - BTUART */ -#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) -#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) -#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1) -#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1) - -/* UART3 - STUART */ -#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3) -#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3) -#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3) -#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3) - -#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5) -#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5) -#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5) -#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5) - -/* DFI */ -#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2) -#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2) -#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2) -#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2) -#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2) -#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2) -#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2) -#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2) -#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2) -#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2) -#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2) -#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2) -#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2) -#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2) -#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2) -#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2) -#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2) -#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2) -#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2) -#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2) -#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2) -#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2) - -/* DFI - NAND */ -#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH) -#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW) -#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW) -#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW) -#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW) -#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW) -#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW) -#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW) -#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW) -#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW) -#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW) -#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW) -#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW) -#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW) -#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW) -#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW) -#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW) -#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW) -#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH) -#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH) -#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH) -#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH) -#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH) -#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH) -#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH) - -/* PWM */ -#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW) -#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW) -#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW) -#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW) -#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW) -#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW) - -/* CIR */ -#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1) -#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3) - -/* USB P2 */ -#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3) -#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5) -#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2) -#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7) -#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6) -#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3) - -#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2) -#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT) -#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2) -#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2) -#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2) -#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2) -#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2) -#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2) - -#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3) -#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3) -#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3) -#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3) -#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3) -#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3) -#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3) -#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3) - -/* ULPI */ -#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4) -#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7) -#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5) -#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5) -#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5) -#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5) -#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5) -#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5) -#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4) -#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4) -#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4) -#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4) - -#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3) -#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7) -#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5) -#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4) -#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3) -#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3) - -#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5) -#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7) -#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5) -#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4) - -#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3) -#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7) -#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3) -#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5) -#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4) -#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3) - -/* 1 wire */ -#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5) - -#endif /* __ASM_ARCH_MFP_PXA9xx_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h deleted file mode 100644 index e7d58798da67..000000000000 --- a/include/asm-arm/arch-pxa/mfp.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/mfp.h - * - * Multi-Function Pin Definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * 2007-8-21: eric miao - * initial version - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MFP_H -#define __ASM_ARCH_MFP_H - -#define mfp_to_gpio(m) ((m) % 128) - -/* list of all the configurable MFP pins */ -enum { - MFP_PIN_INVALID = -1, - - MFP_PIN_GPIO0 = 0, - MFP_PIN_GPIO1, - MFP_PIN_GPIO2, - MFP_PIN_GPIO3, - MFP_PIN_GPIO4, - MFP_PIN_GPIO5, - MFP_PIN_GPIO6, - MFP_PIN_GPIO7, - MFP_PIN_GPIO8, - MFP_PIN_GPIO9, - MFP_PIN_GPIO10, - MFP_PIN_GPIO11, - MFP_PIN_GPIO12, - MFP_PIN_GPIO13, - MFP_PIN_GPIO14, - MFP_PIN_GPIO15, - MFP_PIN_GPIO16, - MFP_PIN_GPIO17, - MFP_PIN_GPIO18, - MFP_PIN_GPIO19, - MFP_PIN_GPIO20, - MFP_PIN_GPIO21, - MFP_PIN_GPIO22, - MFP_PIN_GPIO23, - MFP_PIN_GPIO24, - MFP_PIN_GPIO25, - MFP_PIN_GPIO26, - MFP_PIN_GPIO27, - MFP_PIN_GPIO28, - MFP_PIN_GPIO29, - MFP_PIN_GPIO30, - MFP_PIN_GPIO31, - MFP_PIN_GPIO32, - MFP_PIN_GPIO33, - MFP_PIN_GPIO34, - MFP_PIN_GPIO35, - MFP_PIN_GPIO36, - MFP_PIN_GPIO37, - MFP_PIN_GPIO38, - MFP_PIN_GPIO39, - MFP_PIN_GPIO40, - MFP_PIN_GPIO41, - MFP_PIN_GPIO42, - MFP_PIN_GPIO43, - MFP_PIN_GPIO44, - MFP_PIN_GPIO45, - MFP_PIN_GPIO46, - MFP_PIN_GPIO47, - MFP_PIN_GPIO48, - MFP_PIN_GPIO49, - MFP_PIN_GPIO50, - MFP_PIN_GPIO51, - MFP_PIN_GPIO52, - MFP_PIN_GPIO53, - MFP_PIN_GPIO54, - MFP_PIN_GPIO55, - MFP_PIN_GPIO56, - MFP_PIN_GPIO57, - MFP_PIN_GPIO58, - MFP_PIN_GPIO59, - MFP_PIN_GPIO60, - MFP_PIN_GPIO61, - MFP_PIN_GPIO62, - MFP_PIN_GPIO63, - MFP_PIN_GPIO64, - MFP_PIN_GPIO65, - MFP_PIN_GPIO66, - MFP_PIN_GPIO67, - MFP_PIN_GPIO68, - MFP_PIN_GPIO69, - MFP_PIN_GPIO70, - MFP_PIN_GPIO71, - MFP_PIN_GPIO72, - MFP_PIN_GPIO73, - MFP_PIN_GPIO74, - MFP_PIN_GPIO75, - MFP_PIN_GPIO76, - MFP_PIN_GPIO77, - MFP_PIN_GPIO78, - MFP_PIN_GPIO79, - MFP_PIN_GPIO80, - MFP_PIN_GPIO81, - MFP_PIN_GPIO82, - MFP_PIN_GPIO83, - MFP_PIN_GPIO84, - MFP_PIN_GPIO85, - MFP_PIN_GPIO86, - MFP_PIN_GPIO87, - MFP_PIN_GPIO88, - MFP_PIN_GPIO89, - MFP_PIN_GPIO90, - MFP_PIN_GPIO91, - MFP_PIN_GPIO92, - MFP_PIN_GPIO93, - MFP_PIN_GPIO94, - MFP_PIN_GPIO95, - MFP_PIN_GPIO96, - MFP_PIN_GPIO97, - MFP_PIN_GPIO98, - MFP_PIN_GPIO99, - MFP_PIN_GPIO100, - MFP_PIN_GPIO101, - MFP_PIN_GPIO102, - MFP_PIN_GPIO103, - MFP_PIN_GPIO104, - MFP_PIN_GPIO105, - MFP_PIN_GPIO106, - MFP_PIN_GPIO107, - MFP_PIN_GPIO108, - MFP_PIN_GPIO109, - MFP_PIN_GPIO110, - MFP_PIN_GPIO111, - MFP_PIN_GPIO112, - MFP_PIN_GPIO113, - MFP_PIN_GPIO114, - MFP_PIN_GPIO115, - MFP_PIN_GPIO116, - MFP_PIN_GPIO117, - MFP_PIN_GPIO118, - MFP_PIN_GPIO119, - MFP_PIN_GPIO120, - MFP_PIN_GPIO121, - MFP_PIN_GPIO122, - MFP_PIN_GPIO123, - MFP_PIN_GPIO124, - MFP_PIN_GPIO125, - MFP_PIN_GPIO126, - MFP_PIN_GPIO127, - MFP_PIN_GPIO0_2, - MFP_PIN_GPIO1_2, - MFP_PIN_GPIO2_2, - MFP_PIN_GPIO3_2, - MFP_PIN_GPIO4_2, - MFP_PIN_GPIO5_2, - MFP_PIN_GPIO6_2, - MFP_PIN_GPIO7_2, - MFP_PIN_GPIO8_2, - MFP_PIN_GPIO9_2, - MFP_PIN_GPIO10_2, - MFP_PIN_GPIO11_2, - MFP_PIN_GPIO12_2, - MFP_PIN_GPIO13_2, - MFP_PIN_GPIO14_2, - MFP_PIN_GPIO15_2, - MFP_PIN_GPIO16_2, - MFP_PIN_GPIO17_2, - - MFP_PIN_ULPI_STP, - MFP_PIN_ULPI_NXT, - MFP_PIN_ULPI_DIR, - - MFP_PIN_nXCVREN, - MFP_PIN_DF_CLE_nOE, - MFP_PIN_DF_nADV1_ALE, - MFP_PIN_DF_SCLK_E, - MFP_PIN_DF_SCLK_S, - MFP_PIN_nBE0, - MFP_PIN_nBE1, - MFP_PIN_DF_nADV2_ALE, - MFP_PIN_DF_INT_RnB, - MFP_PIN_DF_nCS0, - MFP_PIN_DF_nCS1, - MFP_PIN_nLUA, - MFP_PIN_nLLA, - MFP_PIN_DF_nWE, - MFP_PIN_DF_ALE_nWE, - MFP_PIN_DF_nRE_nOE, - MFP_PIN_DF_ADDR0, - MFP_PIN_DF_ADDR1, - MFP_PIN_DF_ADDR2, - MFP_PIN_DF_ADDR3, - MFP_PIN_DF_IO0, - MFP_PIN_DF_IO1, - MFP_PIN_DF_IO2, - MFP_PIN_DF_IO3, - MFP_PIN_DF_IO4, - MFP_PIN_DF_IO5, - MFP_PIN_DF_IO6, - MFP_PIN_DF_IO7, - MFP_PIN_DF_IO8, - MFP_PIN_DF_IO9, - MFP_PIN_DF_IO10, - MFP_PIN_DF_IO11, - MFP_PIN_DF_IO12, - MFP_PIN_DF_IO13, - MFP_PIN_DF_IO14, - MFP_PIN_DF_IO15, - - /* additional pins on PXA930 */ - MFP_PIN_GSIM_UIO, - MFP_PIN_GSIM_UCLK, - MFP_PIN_GSIM_UDET, - MFP_PIN_GSIM_nURST, - MFP_PIN_PMIC_INT, - MFP_PIN_RDY, - - MFP_PIN_MAX, -}; - -/* - * a possible MFP configuration is represented by a 32-bit integer - * - * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) - * bit 10..12 - Alternate Function Selection - * bit 13..15 - Drive Strength - * bit 16..18 - Low Power Mode State - * bit 19..20 - Low Power Mode Edge Detection - * bit 21..22 - Run Mode Pull State - * - * to facilitate the definition, the following macros are provided - * - * MFP_CFG_DEFAULT - default MFP configuration value, with - * alternate function = 0, - * drive strength = fast 3mA (MFP_DS03X) - * low power mode = default - * edge detection = none - * - * MFP_CFG - default MFPR value with alternate function - * MFP_CFG_DRV - default MFPR value with alternate function and - * pin drive strength - * MFP_CFG_LPM - default MFPR value with alternate function and - * low power mode - * MFP_CFG_X - default MFPR value with alternate function, - * pin drive strength and low power mode - */ - -typedef unsigned long mfp_cfg_t; - -#define MFP_PIN(x) ((x) & 0x3ff) - -#define MFP_AF0 (0x0 << 10) -#define MFP_AF1 (0x1 << 10) -#define MFP_AF2 (0x2 << 10) -#define MFP_AF3 (0x3 << 10) -#define MFP_AF4 (0x4 << 10) -#define MFP_AF5 (0x5 << 10) -#define MFP_AF6 (0x6 << 10) -#define MFP_AF7 (0x7 << 10) -#define MFP_AF_MASK (0x7 << 10) -#define MFP_AF(x) (((x) >> 10) & 0x7) - -#define MFP_DS01X (0x0 << 13) -#define MFP_DS02X (0x1 << 13) -#define MFP_DS03X (0x2 << 13) -#define MFP_DS04X (0x3 << 13) -#define MFP_DS06X (0x4 << 13) -#define MFP_DS08X (0x5 << 13) -#define MFP_DS10X (0x6 << 13) -#define MFP_DS13X (0x7 << 13) -#define MFP_DS_MASK (0x7 << 13) -#define MFP_DS(x) (((x) >> 13) & 0x7) - -#define MFP_LPM_INPUT (0x0 << 16) -#define MFP_LPM_DRIVE_LOW (0x1 << 16) -#define MFP_LPM_DRIVE_HIGH (0x2 << 16) -#define MFP_LPM_PULL_LOW (0x3 << 16) -#define MFP_LPM_PULL_HIGH (0x4 << 16) -#define MFP_LPM_FLOAT (0x5 << 16) -#define MFP_LPM_STATE_MASK (0x7 << 16) -#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) - -#define MFP_LPM_EDGE_NONE (0x0 << 19) -#define MFP_LPM_EDGE_RISE (0x1 << 19) -#define MFP_LPM_EDGE_FALL (0x2 << 19) -#define MFP_LPM_EDGE_BOTH (0x3 << 19) -#define MFP_LPM_EDGE_MASK (0x3 << 19) -#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) - -#define MFP_PULL_NONE (0x0 << 21) -#define MFP_PULL_LOW (0x1 << 21) -#define MFP_PULL_HIGH (0x2 << 21) -#define MFP_PULL_BOTH (0x3 << 21) -#define MFP_PULL_MASK (0x3 << 21) -#define MFP_PULL(x) (((x) >> 21) & 0x3) - -#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\ - MFP_LPM_EDGE_NONE | MFP_PULL_NONE) - -#define MFP_CFG(pin, af) \ - ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) - -#define MFP_CFG_DRV(pin, af, drv) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) - -#define MFP_CFG_LPM(pin, af, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) - -#define MFP_CFG_X(pin, af, drv, lpm) \ - ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ - (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) - -#endif /* __ASM_ARCH_MFP_H */ diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h deleted file mode 100644 index 6d1304c9270f..000000000000 --- a/include/asm-arm/arch-pxa/mmc.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef ASMARM_ARCH_MMC_H -#define ASMARM_ARCH_MMC_H - -#include -#include - -struct device; -struct mmc_host; - -struct pxamci_platform_data { - unsigned int ocr_mask; /* available voltages */ - unsigned long detect_delay; /* delay in jiffies before detecting cards after interrupt */ - int (*init)(struct device *, irq_handler_t , void *); - int (*get_ro)(struct device *); - void (*setpower)(struct device *, unsigned int); - void (*exit)(struct device *, void *); -}; - -extern void pxa_set_mci_info(struct pxamci_platform_data *info); -extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); -extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-pxa/mtd-xip.h b/include/asm-arm/arch-pxa/mtd-xip.h deleted file mode 100644 index 8704dbceb432..000000000000 --- a/include/asm-arm/arch-pxa/mtd-xip.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARCH_PXA_MTD_XIP_H__ -#define __ARCH_PXA_MTD_XIP_H__ - -#include - -#define xip_irqpending() (ICIP & ICMR) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) - -#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-pxa/ohci.h b/include/asm-arm/arch-pxa/ohci.h deleted file mode 100644 index e848a47128cd..000000000000 --- a/include/asm-arm/arch-pxa/ohci.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef ASMARM_ARCH_OHCI_H -#define ASMARM_ARCH_OHCI_H - -struct device; - -struct pxaohci_platform_data { - int (*init)(struct device *); - void (*exit)(struct device *); - - int port_mode; -#define PMM_NPS_MODE 1 -#define PMM_GLOBAL_MODE 2 -#define PMM_PERPORT_MODE 3 - - int power_budget; -}; - -extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); - -#endif diff --git a/include/asm-arm/arch-pxa/palmtx.h b/include/asm-arm/arch-pxa/palmtx.h deleted file mode 100644 index 1e8bccbda510..000000000000 --- a/include/asm-arm/arch-pxa/palmtx.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * GPIOs and interrupts for Palm T|X Handheld Computer - * - * Based on palmld-gpio.h by Alex Osborne - * - * Authors: Marek Vasut - * Cristiano P. - * Jan Herman <2hp@seznam.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef _INCLUDE_PALMTX_H_ -#define _INCLUDE_PALMTX_H_ - -/** HERE ARE GPIOs **/ - -/* GPIOs */ -#define GPIO_NR_PALMTX_GPIO_RESET 1 - -#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */ -#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10 -#define GPIO_NR_PALMTX_EARPHONE_DETECT 107 - -/* SD/MMC */ -#define GPIO_NR_PALMTX_SD_DETECT_N 14 -#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */ -#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */ - -/* TOUCHSCREEN */ -#define GPIO_NR_PALMTX_WM9712_IRQ 27 - -/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ -#define GPIO_NR_PALMTX_IR_DISABLE 40 - -/* USB */ -#define GPIO_NR_PALMTX_USB_DETECT_N 13 -#define GPIO_NR_PALMTX_USB_POWER 95 -#define GPIO_NR_PALMTX_USB_PULLUP 93 - -/* LCD/BACKLIGHT */ -#define GPIO_NR_PALMTX_BL_POWER 84 -#define GPIO_NR_PALMTX_LCD_POWER 96 - -/* LCD BORDER */ -#define GPIO_NR_PALMTX_BORDER_SWITCH 98 -#define GPIO_NR_PALMTX_BORDER_SELECT 22 - -/* BLUETOOTH */ -#define GPIO_NR_PALMTX_BT_POWER 17 -#define GPIO_NR_PALMTX_BT_RESET 83 - -/* PCMCIA (WiFi) */ -#define GPIO_NR_PALMTX_PCMCIA_POWER1 94 -#define GPIO_NR_PALMTX_PCMCIA_POWER2 108 -#define GPIO_NR_PALMTX_PCMCIA_RESET 79 -#define GPIO_NR_PALMTX_PCMCIA_READY 116 - -/* NAND Flash ... this GPIO may be incorrect! */ -#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 - -/* INTERRUPTS */ -#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) -#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) -#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) -#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) - -/** HERE ARE INIT VALUES **/ - -/* Various addresses */ -#define PALMTX_PCMCIA_PHYS 0x28000000 -#define PALMTX_PCMCIA_VIRT 0xf0000000 -#define PALMTX_PCMCIA_SIZE 0x100000 - -#define PALMTX_PHYS_RAM_START 0xa0000000 -#define PALMTX_PHYS_IO_START 0x40000000 - -#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ -#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ - -/* TOUCHSCREEN */ -#define AC97_LINK_FRAME 21 - - -/* BATTERY */ -#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ -#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ -#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ -#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ -#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ -#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ -#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */ - -#define PALMTX_BAT_MEASURE_DELAY (HZ * 1) - -/* BACKLIGHT */ -#define PALMTX_MAX_INTENSITY 0xFE -#define PALMTX_DEFAULT_INTENSITY 0x7E -#define PALMTX_LIMIT_MASK 0x7F -#define PALMTX_PRESCALER 0x3F -#define PALMTX_PERIOD_NS 3500 - -#endif diff --git a/include/asm-arm/arch-pxa/pcm027.h b/include/asm-arm/arch-pxa/pcm027.h deleted file mode 100644 index 7beae1472c3e..000000000000 --- a/include/asm-arm/arch-pxa/pcm027.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pcm027.h - * - * (c) 2003 Phytec Messtechnik GmbH - * (c) 2007 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Definitions of CPU card resources only - */ - -/* I2C RTC */ -#define PCM027_RTC_IRQ_GPIO 0 -#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) -#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define ADR_PCM027_RTC 0x51 /* I2C address */ - -/* I2C EEPROM */ -#define ADR_PCM027_EEPROM 0x54 /* I2C address */ - -/* Ethernet chip (SMSC91C111) */ -#define PCM027_ETH_IRQ_GPIO 52 -#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO) -#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM027_ETH_PHYS PXA_CS5_PHYS -#define PCM027_ETH_SIZE (1*1024*1024) - -/* CAN controller SJA1000 (unsupported yet) */ -#define PCM027_CAN_IRQ_GPIO 114 -#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO) -#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define PCM027_CAN_PHYS 0x22000000 -#define PCM027_CAN_SIZE 0x100 - -/* SPI GPIO expander (unsupported yet) */ -#define PCM027_EGPIO_IRQ_GPIO 27 -#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO) -#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING -#define PCM027_EGPIO_CS 24 -/* - * TODO: Switch this pin from dedicated usage to GPIO if - * more than the MAX7301 device is connected to this SPI bus - */ -#define PCM027_EGPIO_CS_MODE GPIO24_SFRM_MD - -/* Flash memory */ -#define PCM027_FLASH_PHYS 0x00000000 -#define PCM027_FLASH_SIZE 0x02000000 - -/* onboard LEDs connected to GPIO */ -#define PCM027_LED_CPU 90 -#define PCM027_LED_HEARD_BEAT 91 - -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own basebaord init function and call it from - * inside pcm027_init(). This example here is for the developmen board. - * Refer pcm990-baseboard.c - */ -extern void pcm990_baseboard_init(void); diff --git a/include/asm-arm/arch-pxa/pcm990_baseboard.h b/include/asm-arm/arch-pxa/pcm990_baseboard.h deleted file mode 100644 index 2e2013179063..000000000000 --- a/include/asm-arm/arch-pxa/pcm990_baseboard.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * include/asm-arm/arch-pxa/pcm990_baseboard.h - * - * (c) 2003 Phytec Messtechnik GmbH - * (c) 2007 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -/* - * definitions relevant only when the PCM-990 - * development base board is in use - */ - -/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ -#define PCM990_CTRL_INT_IRQ_GPIO 9 -#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) -#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ -#define PCM990_CTRL_BASE 0xea000000 -#define PCM990_CTRL_SIZE (1*1024*1024) - -#define PCM990_CTRL_PWR_IRQ_GPIO 14 -#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) -#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -/* visible CPLD (U7) registers */ -#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ -#define PCM990_CTRL_SYSRES 0x0001 /* System RESET REGISTER */ -#define PCM990_CTRL_RESOUT 0x0002 /* RESETOUT Enable REGISTER */ -#define PCM990_CTRL_RESGPIO 0x0004 /* RESETGPIO Enable REGISTER */ - -#define PCM990_CTRL_REG1 0x0002 /* Power REGISTER */ -#define PCM990_CTRL_5VOFF 0x0001 /* Disable 5V Regulators */ -#define PCM990_CTRL_CANPWR 0x0004 /* Enable CANPWR ADUM */ -#define PCM990_CTRL_PM_5V 0x0008 /* Read 5V OK */ - -#define PCM990_CTRL_REG2 0x0004 /* LED REGISTER */ -#define PCM990_CTRL_LEDPWR 0x0001 /* POWER LED enable */ -#define PCM990_CTRL_LEDBAS 0x0002 /* BASIS LED enable */ -#define PCM990_CTRL_LEDUSR 0x0004 /* USER LED enable */ - -#define PCM990_CTRL_REG3 0x0006 /* LCD CTRL REGISTER 3 */ -#define PCM990_CTRL_LCDPWR 0x0001 /* RW LCD Power on */ -#define PCM990_CTRL_LCDON 0x0002 /* RW LCD Latch on */ -#define PCM990_CTRL_LCDPOS1 0x0004 /* RW POS 1 */ -#define PCM990_CTRL_LCDPOS2 0x0008 /* RW POS 2 */ - -#define PCM990_CTRL_REG4 0x0008 /* MMC1 CTRL REGISTER 4 */ -#define PCM990_CTRL_MMC1PWR 0x0001 /* RW MMC1 Power on */ - -#define PCM990_CTRL_REG5 0x000A /* MMC2 CTRL REGISTER 5 */ -#define PCM990_CTRL_MMC2PWR 0x0001 /* RW MMC2 Power on */ -#define PCM990_CTRL_MMC2LED 0x0002 /* RW MMC2 LED */ -#define PCM990_CTRL_MMC2DE 0x0004 /* R MMC2 Card detect */ -#define PCM990_CTRL_MMC2WP 0x0008 /* R MMC2 Card write protect */ - -#define PCM990_CTRL_REG6 0x000C /* Interrupt Clear REGISTER */ -#define PCM990_CTRL_INTC0 0x0001 /* Clear Reg BT Detect */ -#define PCM990_CTRL_INTC1 0x0002 /* Clear Reg FR RI */ -#define PCM990_CTRL_INTC2 0x0004 /* Clear Reg MMC1 Detect */ -#define PCM990_CTRL_INTC3 0x0008 /* Clear Reg PM_5V off */ - -#define PCM990_CTRL_REG7 0x000E /* Interrupt Enable REGISTER */ -#define PCM990_CTRL_ENAINT0 0x0001 /* Enable Int BT Detect */ -#define PCM990_CTRL_ENAINT1 0x0002 /* Enable Int FR RI */ -#define PCM990_CTRL_ENAINT2 0x0004 /* Enable Int MMC1 Detect */ -#define PCM990_CTRL_ENAINT3 0x0008 /* Enable Int PM_5V off */ - -#define PCM990_CTRL_REG8 0x0014 /* Uart REGISTER */ -#define PCM990_CTRL_FFSD 0x0001 /* BT Uart Enable */ -#define PCM990_CTRL_BTSD 0x0002 /* FF Uart Enable */ -#define PCM990_CTRL_FFRI 0x0004 /* FF Uart RI detect */ -#define PCM990_CTRL_BTRX 0x0008 /* BT Uart Rx detect */ - -#define PCM990_CTRL_REG9 0x0010 /* AC97 Flash REGISTER */ -#define PCM990_CTRL_FLWP 0x0001 /* pC Flash Write Protect */ -#define PCM990_CTRL_FLDIS 0x0002 /* pC Flash Disable */ -#define PCM990_CTRL_AC97ENA 0x0004 /* Enable AC97 Expansion */ - -#define PCM990_CTRL_REG10 0x0012 /* GPS-REGISTER */ -#define PCM990_CTRL_GPSPWR 0x0004 /* GPS-Modul Power on */ -#define PCM990_CTRL_GPSENA 0x0008 /* GPS-Modul Enable */ - -#define PCM990_CTRL_REG11 0x0014 /* Accu REGISTER */ -#define PCM990_CTRL_ACENA 0x0001 /* Charge Enable */ -#define PCM990_CTRL_ACSEL 0x0002 /* Charge Akku -> DC Enable */ -#define PCM990_CTRL_ACPRES 0x0004 /* DC Present */ -#define PCM990_CTRL_ACALARM 0x0008 /* Error Akku */ - -#define PCM990_CTRL_P2V(x) ((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE) -#define PCM990_CTRL_V2P(x) ((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS) - -#ifndef __ASSEMBLY__ -# define __PCM990_CTRL_REG(x) \ - (*((volatile unsigned char *)PCM990_CTRL_P2V(x))) -#else -# define __PCM990_CTRL_REG(x) PCM990_CTRL_P2V(x) -#endif - -#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL0 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0) -#define PCM990_CTRL1 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1) -#define PCM990_CTRL2 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2) -#define PCM990_CTRL3 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) -#define PCM990_CTRL4 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4) -#define PCM990_CTRL5 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) -#define PCM990_CTRL6 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6) -#define PCM990_CTRL7 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7) -#define PCM990_CTRL8 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8) -#define PCM990_CTRL9 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9) -#define PCM990_CTRL10 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10) -#define PCM990_CTRL11 __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11) - - -/* - * IDE - */ -#define PCM990_IDE_IRQ_GPIO 13 -#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) -#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING -#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ -#define PCM990_IDE_PLD_BASE 0xee000000 -#define PCM990_IDE_PLD_SIZE (1*1024*1024) - -/* visible CPLD (U6) registers */ -#define PCM990_IDE_PLD_REG0 0x1000 /* OFFSET IDE REGISTER 0 */ -#define PCM990_IDE_PM5V 0x0004 /* R System VCC_5V */ -#define PCM990_IDE_STBY 0x0008 /* R System StandBy */ - -#define PCM990_IDE_PLD_REG1 0x1002 /* OFFSET IDE REGISTER 1 */ -#define PCM990_IDE_IDEMODE 0x0001 /* R TrueIDE Mode */ -#define PCM990_IDE_DMAENA 0x0004 /* RW DMA Enable */ -#define PCM990_IDE_DMA1_0 0x0008 /* RW 1=DREQ1 0=DREQ0 */ - -#define PCM990_IDE_PLD_REG2 0x1004 /* OFFSET IDE REGISTER 2 */ -#define PCM990_IDE_RESENA 0x0001 /* RW IDE Reset Bit enable */ -#define PCM990_IDE_RES 0x0002 /* RW IDE Reset Bit */ -#define PCM990_IDE_RDY 0x0008 /* RDY */ - -#define PCM990_IDE_PLD_REG3 0x1006 /* OFFSET IDE REGISTER 3 */ -#define PCM990_IDE_IDEOE 0x0001 /* RW Latch on Databus */ -#define PCM990_IDE_IDEON 0x0002 /* RW Latch on Control Address */ -#define PCM990_IDE_IDEIN 0x0004 /* RW Latch on Interrupt usw. */ - -#define PCM990_IDE_PLD_REG4 0x1008 /* OFFSET IDE REGISTER 4 */ -#define PCM990_IDE_PWRENA 0x0001 /* RW IDE Power enable */ -#define PCM990_IDE_5V 0x0002 /* R IDE Power 5V */ -#define PCM990_IDE_PWG 0x0008 /* R IDE Power is on */ - -#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE) -#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS) - -#ifndef __ASSEMBLY__ -# define __PCM990_IDE_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x))) -#else -# define __PCM990_IDE_PLD_REG(x) PCM990_IDE_PLD_P2V(x) -#endif - -#define PCM990_IDE0 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0) -#define PCM990_IDE1 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1) -#define PCM990_IDE2 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2) -#define PCM990_IDE3 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3) -#define PCM990_IDE4 \ - __PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4) - -/* - * Compact Flash - */ -#define PCM990_CF_IRQ_GPIO 11 -#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) -#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -#define PCM990_CF_CD_GPIO 12 -#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) -#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING - -#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ -#define PCM990_CF_PLD_BASE 0xef000000 -#define PCM990_CF_PLD_SIZE (1*1024*1024) -#define PCM990_CF_PLD_P2V(x) ((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE) -#define PCM990_CF_PLD_V2P(x) ((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS) - -/* visible CPLD (U6) registers */ -#define PCM990_CF_PLD_REG0 0x1000 /* OFFSET CF REGISTER 0 */ -#define PCM990_CF_REG0_LED 0x0001 /* RW LED on */ -#define PCM990_CF_REG0_BLK 0x0002 /* RW LED flash when access */ -#define PCM990_CF_REG0_PM5V 0x0004 /* R System VCC_5V enable */ -#define PCM990_CF_REG0_STBY 0x0008 /* R System StandBy */ - -#define PCM990_CF_PLD_REG1 0x1002 /* OFFSET CF REGISTER 1 */ -#define PCM990_CF_REG1_IDEMODE 0x0001 /* RW CF card run as TrueIDE */ -#define PCM990_CF_REG1_CF0 0x0002 /* RW CF card at ADDR 0x28000000 */ - -#define PCM990_CF_PLD_REG2 0x1004 /* OFFSET CF REGISTER 2 */ -#define PCM990_CF_REG2_RES 0x0002 /* RW CF RESET BIT */ -#define PCM990_CF_REG2_RDYENA 0x0004 /* RW Enable CF_RDY */ -#define PCM990_CF_REG2_RDY 0x0008 /* R CF_RDY auf PWAIT */ - -#define PCM990_CF_PLD_REG3 0x1006 /* OFFSET CF REGISTER 3 */ -#define PCM990_CF_REG3_CFOE 0x0001 /* RW Latch on Databus */ -#define PCM990_CF_REG3_CFON 0x0002 /* RW Latch on Control Address */ -#define PCM990_CF_REG3_CFIN 0x0004 /* RW Latch on Interrupt usw. */ -#define PCM990_CF_REG3_CFCD 0x0008 /* RW Latch on CD1/2 VS1/2 usw */ - -#define PCM990_CF_PLD_REG4 0x1008 /* OFFSET CF REGISTER 4 */ -#define PCM990_CF_REG4_PWRENA 0x0001 /* RW CF Power on (CD1/2 = "00") */ -#define PCM990_CF_REG4_5_3V 0x0002 /* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */ -#define PCM990_CF_REG4_3B 0x0004 /* RW 3.0V Backup from VCC (5_3V=0) */ -#define PCM990_CF_REG4_PWG 0x0008 /* R CF-Power is on */ - -#define PCM990_CF_PLD_REG5 0x100A /* OFFSET CF REGISTER 5 */ -#define PCM990_CF_REG5_BVD1 0x0001 /* R CF /BVD1 */ -#define PCM990_CF_REG5_BVD2 0x0002 /* R CF /BVD2 */ -#define PCM990_CF_REG5_VS1 0x0004 /* R CF /VS1 */ -#define PCM990_CF_REG5_VS2 0x0008 /* R CF /VS2 */ - -#define PCM990_CF_PLD_REG6 0x100C /* OFFSET CF REGISTER 6 */ -#define PCM990_CF_REG6_CD1 0x0001 /* R CF Card_Detect1 */ -#define PCM990_CF_REG6_CD2 0x0002 /* R CF Card_Detect2 */ - -#ifndef __ASSEMBLY__ -# define __PCM990_CF_PLD_REG(x) \ - (*((volatile unsigned char *)PCM990_CF_PLD_P2V(x))) -#else -# define __PCM990_CF_PLD_REG(x) PCM990_CF_PLD_P2V(x) -#endif - -#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0) -#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1) -#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2) -#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3) -#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4) -#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5) -#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6) - -/* - * Wolfson AC97 Touch - */ -#define PCM990_AC97_IRQ_GPIO 10 -#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) -#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING - -/* - * MMC phyCORE - */ -#define PCM990_MMC0_IRQ_GPIO 9 -#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) -#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING - -/* - * USB phyCore - */ -#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN) -#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT) diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h deleted file mode 100644 index 261e5bc958db..000000000000 --- a/include/asm-arm/arch-pxa/pm.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include - -struct pxa_cpu_pm_fns { - int save_count; - void (*save)(unsigned long *); - void (*restore)(unsigned long *); - int (*valid)(suspend_state_t state); - void (*enter)(suspend_state_t state); -}; - -extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; - -/* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int); -extern void pxa27x_cpu_suspend(unsigned int); -extern void pxa_cpu_resume(void); - -extern int pxa_pm_enter(suspend_state_t state); diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h deleted file mode 100644 index 4d6a40315764..000000000000 --- a/include/asm-arm/arch-pxa/poodle.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/poodle.h - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Based on: - * linux/include/asm-arm/arch-sa1100/collie.h - * - * ChangeLog: - * 04-06-2001 Lineo Japan, Inc. - * 04-16-2001 SHARP Corporation - * Update to 2.6 John Lenz - */ -#ifndef __ASM_ARCH_POODLE_H -#define __ASM_ARCH_POODLE_H 1 - -/* - * GPIOs - */ -/* PXA GPIOs */ -#define POODLE_GPIO_ON_KEY (0) -#define POODLE_GPIO_AC_IN (1) -#define POODLE_GPIO_CO 16 -#define POODLE_GPIO_TP_INT (5) -#define POODLE_GPIO_WAKEUP (11) /* change battery */ -#define POODLE_GPIO_GA_INT (10) -#define POODLE_GPIO_IR_ON (22) -#define POODLE_GPIO_HP_IN (4) -#define POODLE_GPIO_CF_IRQ (17) -#define POODLE_GPIO_CF_CD (14) -#define POODLE_GPIO_CF_STSCHG (14) -#define POODLE_GPIO_SD_PWR (33) -#define POODLE_GPIO_SD_PWR1 (3) -#define POODLE_GPIO_nSD_CLK (6) -#define POODLE_GPIO_nSD_WP (7) -#define POODLE_GPIO_nSD_INT (8) -#define POODLE_GPIO_nSD_DETECT (9) -#define POODLE_GPIO_MAIN_BAT_LOW (13) -#define POODLE_GPIO_BAT_COVER (13) -#define POODLE_GPIO_USB_PULLUP (20) -#define POODLE_GPIO_ADC_TEMP_ON (21) -#define POODLE_GPIO_BYPASS_ON (36) -#define POODLE_GPIO_CHRG_ON (38) -#define POODLE_GPIO_CHRG_FULL (16) -#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */ - -/* PXA GPIOs */ -#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0) -#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1) -#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4) -#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16) -#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5) -#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11) -#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10) -#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17) -#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14) -#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8) -#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9) -#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13) - -/* SCOOP GPIOs */ -#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11 -#define POODLE_SCOOP_CP401 SCOOP_GPCR_PA13 -#define POODLE_SCOOP_VPEN SCOOP_GPCR_PA18 -#define POODLE_SCOOP_L_PCLK SCOOP_GPCR_PA20 -#define POODLE_SCOOP_L_LCLK SCOOP_GPCR_PA21 -#define POODLE_SCOOP_HS_OUT SCOOP_GPCR_PA22 - -#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) -#define POODLE_SCOOP_IO_OUT ( 0 ) - -extern struct platform_device poodle_locomo_device; - -#endif /* __ASM_ARCH_POODLE_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h deleted file mode 100644 index dce9308626b7..000000000000 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ /dev/null @@ -1,1070 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA_REGS_H -#define __PXA_REGS_H - - -/* - * PXA Chip selects - */ - -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 - - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - - -/* - * DMA Controller - */ - -#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ - -#define DCSR(x) __REG2(0x40000000, (x) << 2) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#ifdef CONFIG_PXA27x -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ -#endif -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#define DALGN __REG(0x400000a0) /* DMA Alignment Register */ -#define DINT __REG(0x400000f0) /* DMA Interrupt Register */ - -#define DRCMR(n) (*(((n) < 64) ? \ - &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ - &__REG2(0x40001100, ((n) & 0x3f) << 2))) - -#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ -#define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ -#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 __REG(0x4000015c) /* Reserved */ -#define DRCMR24 __REG(0x40000160) /* Reserved */ -#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 __REG(0x40000174) /* Reserved */ -#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 __REG(0x40000188) /* Reserved */ -#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 __REG(0x4000019C) /* Reserved */ -#define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ -#define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ -#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ - -#define DRCMRRXSADR DRCMR2 -#define DRCMRTXSADR DRCMR3 -#define DRCMRRXBTRBR DRCMR4 -#define DRCMRTXBTTHR DRCMR5 -#define DRCMRRXFFRBR DRCMR6 -#define DRCMRTXFFTHR DRCMR7 -#define DRCMRRXMCDR DRCMR8 -#define DRCMRRXMODR DRCMR9 -#define DRCMRTXMODR DRCMR10 -#define DRCMRRXPCDR DRCMR11 -#define DRCMRTXPCDR DRCMR12 -#define DRCMRRXSSDR DRCMR13 -#define DRCMRTXSSDR DRCMR14 -#define DRCMRRXSS2DR DRCMR15 -#define DRCMRTXSS2DR DRCMR16 -#define DRCMRRXICDR DRCMR17 -#define DRCMRTXICDR DRCMR18 -#define DRCMRRXSTRBR DRCMR19 -#define DRCMRTXSTTHR DRCMR20 -#define DRCMRRXMMC DRCMR21 -#define DRCMRTXMMC DRCMR22 -#define DRCMRRXSS3DR DRCMR66 -#define DRCMRTXSS3DR DRCMR67 -#define DRCMRUDC(x) DRCMR((x) + 24) - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ - -#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ -#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ -#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ -#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ -#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ -#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ -#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ -#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ -#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ -#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ -#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ -#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ -#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ -#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ -#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ -#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ -#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ -#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ -#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ -#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ -#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ -#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ -#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ -#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ -#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ -#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ -#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ -#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ -#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ -#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ -#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ -#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ -#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ -#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ -#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ -#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ -#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ -#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ -#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ -#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ -#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ -#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ -#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ -#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ -#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ -#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ -#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ -#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ - -#define DDADR(x) __REG2(0x40000200, (x) << 4) -#define DSADR(x) __REG2(0x40000204, (x) << 4) -#define DTADR(x) __REG2(0x40000208, (x) << 4) -#define DCMD(x) __REG2(0x4000020c, (x) << 4) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - - -/* - * UARTs - */ - -/* Full Function UART (FFUART) */ -#define FFUART FFRBR -#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ -#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ -#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ -#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ -#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ -#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ -#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ -#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ -#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ -#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ -#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ -#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Bluetooth UART (BTUART) */ -#define BTUART BTRBR -#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ -#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ -#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ -#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ -#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ -#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ -#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ -#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ -#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ -#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ -#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ -#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Standard UART (STUART) */ -#define STUART STRBR -#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ -#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ -#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ -#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ -#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ -#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ -#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ -#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ -#define STMSR __REG(0x40700018) /* Reserved */ -#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ -#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ -#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Hardware UART (HWUART) */ -#define HWUART HWRBR -#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ -#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ -#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ -#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ -#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ -#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ -#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ -#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ -#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ -#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ -#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ -#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ -#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ -#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ -#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -#define IER_DMAE (1 << 7) /* DMA Requests Enable */ -#define IER_UUE (1 << 6) /* UART Unit Enable */ -#define IER_NRZE (1 << 5) /* NRZ coding Enable */ -#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ -#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ -#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ -#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ -#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ - -#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ -#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ -#define IIR_TOD (1 << 3) /* Time Out Detected */ -#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ -#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ -#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ - -#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ -#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ -#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ -#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ -#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ -#define FCR_ITL_1 (0) -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ -#define LCR_SB (1 << 6) /* Set Break */ -#define LCR_STKYP (1 << 5) /* Sticky Parity */ -#define LCR_EPS (1 << 4) /* Even Parity Select */ -#define LCR_PEN (1 << 3) /* Parity Enable */ -#define LCR_STB (1 << 2) /* Stop Bit */ -#define LCR_WLS1 (1 << 1) /* Word Length Select */ -#define LCR_WLS0 (1 << 0) /* Word Length Select */ - -#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ -#define LSR_TEMT (1 << 6) /* Transmitter Empty */ -#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ -#define LSR_BI (1 << 4) /* Break Interrupt */ -#define LSR_FE (1 << 3) /* Framing Error */ -#define LSR_PE (1 << 2) /* Parity Error */ -#define LSR_OE (1 << 1) /* Overrun Error */ -#define LSR_DR (1 << 0) /* Data Ready */ - -#define MCR_LOOP (1 << 4) -#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ -#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ -#define MCR_RTS (1 << 1) /* Request to Send */ -#define MCR_DTR (1 << 0) /* Data Terminal Ready */ - -#define MSR_DCD (1 << 7) /* Data Carrier Detect */ -#define MSR_RI (1 << 6) /* Ring Indicator */ -#define MSR_DSR (1 << 5) /* Data Set Ready */ -#define MSR_CTS (1 << 4) /* Clear To Send */ -#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ -#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ -#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ - -/* - * IrSR (Infrared Selection Register) - */ -#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ -#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ -#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ -#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ -#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ - - -/* - * I2C registers - */ - -#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ -#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ -#define ICR __REG(0x40301690) /* I2C Control Register - ICR */ -#define ISR __REG(0x40301698) /* I2C Status Register - ISR */ -#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ - -#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ -#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ -#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ -#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ -#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ - -#define ICR_START (1 << 0) /* start bit */ -#define ICR_STOP (1 << 1) /* stop bit */ -#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ -#define ICR_TB (1 << 3) /* transfer byte bit */ -#define ICR_MA (1 << 4) /* master abort */ -#define ICR_SCLE (1 << 5) /* master clock enable */ -#define ICR_IUE (1 << 6) /* unit enable */ -#define ICR_GCD (1 << 7) /* general call disable */ -#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ -#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ -#define ICR_BEIE (1 << 10) /* enable bus error ints */ -#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ -#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ -#define ICR_SADIE (1 << 13) /* slave address detected int enable */ -#define ICR_UR (1 << 14) /* unit reset */ - -#define ISR_RWM (1 << 0) /* read/write mode */ -#define ISR_ACKNAK (1 << 1) /* ack/nak status */ -#define ISR_UB (1 << 2) /* unit busy */ -#define ISR_IBB (1 << 3) /* bus busy */ -#define ISR_SSD (1 << 4) /* slave stop detected */ -#define ISR_ALD (1 << 5) /* arbitration loss detected */ -#define ISR_ITE (1 << 6) /* tx buffer empty */ -#define ISR_IRF (1 << 7) /* rx buffer full */ -#define ISR_GCAD (1 << 8) /* general call address detected */ -#define ISR_SAD (1 << 9) /* slave address detected */ -#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ - - -/* - * Serial Audio Controller - */ - -#define SACR0 __REG(0x40400000) /* Global Control Register */ -#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ -#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ -#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ -#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ - -#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ -#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ -#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ -#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ -#define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ -#define SACR0_ENB (1 << 0) /* Enable I2S Link */ -#define SACR1_ENLBF (1 << 5) /* Enable Loopback */ -#define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ -#define SACR1_DREC (1 << 3) /* Disable Recording Function */ -#define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ - -#define SASR0_I2SOFF (1 << 7) /* Controller Status */ -#define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ -#define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ -#define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ -#define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ -#define SASR0_BSY (1 << 2) /* I2S Busy */ -#define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ -#define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ - -#define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ -#define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ - -#define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ -#define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ -#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ -#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ - -/* - * AC97 Controller registers - */ - -#define POCR __REG(0x40500000) /* PCM Out Control Register */ -#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define PICR __REG(0x40500004) /* PCM In Control Register */ -#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MCCR __REG(0x40500008) /* Mic In Control Register */ -#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define GCR __REG(0x4050000C) /* Global Control Register */ -#ifdef CONFIG_PXA3xx -#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ -#endif -#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ -#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ -#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ -#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ -#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ -#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ -#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ -#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ -#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ -#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ - -#define POSR __REG(0x40500010) /* PCM Out Status Register */ -#define POSR_FIFOE (1 << 4) /* FIFO error */ -#define POSR_FSR (1 << 2) /* FIFO Service Request */ - -#define PISR __REG(0x40500014) /* PCM In Status Register */ -#define PISR_FIFOE (1 << 4) /* FIFO error */ -#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define PISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MCSR __REG(0x40500018) /* Mic In Status Register */ -#define MCSR_FIFOE (1 << 4) /* FIFO error */ -#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MCSR_FSR (1 << 2) /* FIFO Service Request */ - -#define GSR __REG(0x4050001C) /* Global Status Register */ -#define GSR_CDONE (1 << 19) /* Command Done */ -#define GSR_SDONE (1 << 18) /* Status Done */ -#define GSR_RDCS (1 << 15) /* Read Completion Status */ -#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ -#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ -#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ -#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ -#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ -#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ -#define GSR_PCR (1 << 8) /* Primary Codec Ready */ -#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ -#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ -#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ -#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ -#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ -#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ -#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ - -#define CAR __REG(0x40500020) /* CODEC Access Register */ -#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ - -#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ -#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ - -#define MOCR __REG(0x40500100) /* Modem Out Control Register */ -#define MOCR_FEIE (1 << 3) /* FIFO Error */ -#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MICR __REG(0x40500108) /* Modem In Control Register */ -#define MICR_FEIE (1 << 3) /* FIFO Error */ -#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MOSR __REG(0x40500110) /* Modem Out Status Register */ -#define MOSR_FIFOE (1 << 4) /* FIFO error */ -#define MOSR_FSR (1 << 2) /* FIFO Service Request */ - -#define MISR __REG(0x40500118) /* Modem In Status Register */ -#define MISR_FIFOE (1 << 4) /* FIFO error */ -#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ - -#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ -#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ -#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ -#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - - -/* - * Fast Infrared Communication Port - */ - -#define FICP __REG(0x40800000) /* Start of FICP area */ -#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ -#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ -#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ -#define ICDR __REG(0x4080000c) /* ICP Data Register */ -#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ -#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ - -#define ICCR0_AME (1 << 7) /* Address match enable */ -#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ -#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ -#define ICCR0_RXE (1 << 4) /* Receive enable */ -#define ICCR0_TXE (1 << 3) /* Transmit enable */ -#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ -#define ICCR0_LBM (1 << 1) /* Loopback mode */ -#define ICCR0_ITR (1 << 0) /* IrDA transmission */ - -#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ -#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ -#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ -#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ -#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ -#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ - -#ifdef CONFIG_PXA27x -#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ -#endif -#define ICSR0_FRE (1 << 5) /* Framing error */ -#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ -#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ -#define ICSR0_RAB (1 << 2) /* Receiver abort */ -#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ -#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ - -#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ -#define ICSR1_CRE (1 << 5) /* CRC error */ -#define ICSR1_EOF (1 << 4) /* End of frame */ -#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ -#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ -#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ -#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ - - -/* - * Real Time Clock - */ - -#define RCNR __REG(0x40900000) /* RTC Count Register */ -#define RTAR __REG(0x40900004) /* RTC Alarm Register */ -#define RTSR __REG(0x40900008) /* RTC Status Register */ -#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ - -#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - - -/* - * OS Timer & Match Registers - */ - -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ -#define OSSR __REG(0x40A00014) /* OS Timer Status Register */ -#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ -#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ - -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - - -/* - * Pulse Width Modulator - */ - -#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ -#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ -#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ - -#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ -#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ -#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ - - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -/* - * General Purpose I/O - */ - -#define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) -#define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) -#define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) -#define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 - -#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ -#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ - -#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ - -/* More handy macros. The argument is a literal GPIO number. */ - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - -/* Interrupt Controller */ - -#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) -#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) -#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) -#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) -#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) -#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) -#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) -#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ - ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) -#else - -#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) -#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) -#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) -#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) -#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) -#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) -#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) -#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) - -#endif - -/* - * Power Manager - see pxa2xx-regs.h - */ - -/* - * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h - */ - -/* - * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h - */ - -/* - * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h - */ - -#ifdef CONFIG_PXA27x - -/* Camera Interface */ -#define CICR0 __REG(0x50000000) -#define CICR1 __REG(0x50000004) -#define CICR2 __REG(0x50000008) -#define CICR3 __REG(0x5000000C) -#define CICR4 __REG(0x50000010) -#define CISR __REG(0x50000014) -#define CIFR __REG(0x50000018) -#define CITOR __REG(0x5000001C) -#define CIBR0 __REG(0x50000028) -#define CIBR1 __REG(0x50000030) -#define CIBR2 __REG(0x50000038) - -#define CICR0_DMAEN (1 << 31) /* DMA request enable */ -#define CICR0_PAR_EN (1 << 30) /* Parity enable */ -#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ -#define CICR0_ENB (1 << 28) /* Camera interface enable */ -#define CICR0_DIS (1 << 27) /* Camera interface disable */ -#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ -#define CICR0_TOM (1 << 9) /* Time-out mask */ -#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ -#define CICR0_FEM (1 << 7) /* FIFO-empty mask */ -#define CICR0_EOLM (1 << 6) /* End-of-line mask */ -#define CICR0_PERRM (1 << 5) /* Parity-error mask */ -#define CICR0_QDM (1 << 4) /* Quick-disable mask */ -#define CICR0_CDM (1 << 3) /* Disable-done mask */ -#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ -#define CICR0_EOFM (1 << 1) /* End-of-frame mask */ -#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ - -#define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ -#define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ -#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ -#define CICR1_RGB_F (1 << 11) /* RGB format */ -#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ -#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ -#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ -#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ -#define CICR1_DW (0x7 << 0) /* Data width mask */ - -#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock - wait count mask */ -#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock - wait count mask */ -#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ -#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR2_FSW (0x7 << 0) /* Frame stabilization - wait count mask */ - -#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock - wait count mask */ -#define CICR3_EFW (0xff << 16) /* End-of-frame line clock - wait count mask */ -#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ -#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock - wait count mask */ -#define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ - -#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ -#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ -#define CICR4_PCP (1 << 22) /* Pixel clock polarity */ -#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ -#define CICR4_VSP (1 << 20) /* Vertical sync polarity */ -#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ -#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ -#define CICR4_DIV (0xff << 0) /* Clock divisor mask */ - -#define CISR_FTO (1 << 15) /* FIFO time-out */ -#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ -#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ -#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ -#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ -#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ -#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ -#define CISR_EOL (1 << 8) /* End of line */ -#define CISR_PAR_ERR (1 << 7) /* Parity error */ -#define CISR_CQD (1 << 6) /* Camera interface quick disable */ -#define CISR_CDD (1 << 5) /* Camera interface disable done */ -#define CISR_SOF (1 << 4) /* Start of frame */ -#define CISR_EOF (1 << 3) /* End of frame */ -#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ -#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ -#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ - -#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ -#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ -#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ -#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ -#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ -#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ -#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ -#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ - -#define SRAM_SIZE 0x40000 /* 4x64K */ - -#define SRAM_MEM_PHYS 0x5C000000 - -#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ -#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ - -#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ -#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ -#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ -#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ - -#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ -#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ -#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ -#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ - -#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ -#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ -#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ -#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ - -#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ -#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ -#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ -#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ - -#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ -#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ -#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ -#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ - -#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ - -#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ -#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ -#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ - -#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ -#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ -#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ - -#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ -#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ -#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ - -#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ -#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ -#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ - -#endif - -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -/* - * UHC: USB Host Controller (OHCI-like) register definitions - */ -#define UHC_BASE_PHYS (0x4C000000) -#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ -#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ -#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ -#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ -#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ -#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ -#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ -#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ -#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ -#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ -#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ -#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ -#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ -#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ -#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ -#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ -#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ -#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ - -#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ -#define UHCRHDA_NOCP (1 << 12) /* No over current protection */ - -#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ -#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ -#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ -#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ -#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ - -#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ -#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ -#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ -#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ -#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ -#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ -#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ -#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ -#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ -#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ - -#define UHCHR __REG(0x4C000064) /* UHC Reset Register */ -#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ -#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ -#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ -#define UHCHR_PCPL (1 << 7) /* Power control polarity low */ -#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ -#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ -#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ -#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ -#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ -#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ -#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ - -#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ -#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ -#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ -#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ -#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ -#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort - Interrupt Enable*/ -#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ -#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ - -#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ - -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ - -/* PWRMODE register M field values */ - -#define PWRMODE_IDLE 0x1 -#define PWRMODE_STANDBY 0x2 -#define PWRMODE_SLEEP 0x3 -#define PWRMODE_DEEPSLEEP 0x7 - -#endif diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h deleted file mode 100644 index 1b80a4805a60..000000000000 --- a/include/asm-arm/arch-pxa/pxa25x-udc.h +++ /dev/null @@ -1,163 +0,0 @@ -#ifndef _ASM_ARCH_PXA25X_UDC_H -#define _ASM_ARCH_PXA25X_UDC_H - -#ifdef _ASM_ARCH_PXA27X_UDC_H -#error "You can't include both PXA25x and PXA27x UDC support" -#endif - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#endif diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h deleted file mode 100644 index ab1443f8bd89..000000000000 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ /dev/null @@ -1,257 +0,0 @@ -#ifndef _ASM_ARCH_PXA27X_UDC_H -#define _ASM_ARCH_PXA27X_UDC_H - -#ifdef _ASM_ARCH_PXA25X_UDC_H -#error You cannot include both PXA25x and PXA27x UDC support -#endif - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation - Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol - Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol - Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface - Setting Number */ -#define UDCCR_AAISN_S 5 -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active - Configuration */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration - Error */ -#define UDCCR_UDR (1 << 2) /* UDC Resume */ -#define UDCCR_UDA (1 << 1) /* UDC Active */ -#define UDCCR_UDE (1 << 0) /* UDC Enable */ - -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ - -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt - Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt - Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising - Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling - Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge - Interrupt Enable */ - -#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ -#define UP3OCR __REG(0x40600024) /* USB Port 2 Output Control register */ - -#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ -#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ -#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ -#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ -#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ -#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ -#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ -#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ -#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ -#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ -#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ -#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ -#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */ - -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ - -#define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) -#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ - -#define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDC_FNR_MASK (0x7ff) - -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) - -#endif diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h deleted file mode 100644 index d5a48a96dea7..000000000000 --- a/include/asm-arm/arch-pxa/pxa27x_keypad.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef __ASM_ARCH_PXA27x_KEYPAD_H -#define __ASM_ARCH_PXA27x_KEYPAD_H - -#include - -#define MAX_MATRIX_KEY_ROWS (8) -#define MAX_MATRIX_KEY_COLS (8) - -/* pxa3xx keypad platform specific parameters - * - * NOTE: - * 1. direct_key_num indicates the number of keys in the direct keypad - * _plus_ the number of rotary-encoder sensor inputs, this can be - * left as 0 if only rotary encoders are enabled, the driver will - * automatically calculate this - * - * 2. direct_key_map is the key code map for the direct keys, if rotary - * encoder(s) are enabled, direct key 0/1(2/3) will be ignored - * - * 3. rotary can be either interpreted as a relative input event (e.g. - * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) - * - * 4. matrix key and direct key will use the same debounce_interval by - * default, which should be sufficient in most cases - */ -struct pxa27x_keypad_platform_data { - - /* code map for the matrix keys */ - unsigned int matrix_key_rows; - unsigned int matrix_key_cols; - unsigned int *matrix_key_map; - int matrix_key_map_size; - - /* direct keys */ - int direct_key_num; - unsigned int direct_key_map[8]; - - /* rotary encoders 0 */ - int enable_rotary0; - int rotary0_rel_code; - int rotary0_up_key; - int rotary0_down_key; - - /* rotary encoders 1 */ - int enable_rotary1; - int rotary1_rel_code; - int rotary1_up_key; - int rotary1_down_key; - - /* key debounce interval */ - unsigned int debounce_interval; -}; - -#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) - -extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); - -#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h deleted file mode 100644 index 6ef1dd09970b..000000000000 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ /dev/null @@ -1,368 +0,0 @@ -#ifndef __ASM_ARCH_PXA2XX_GPIO_H -#define __ASM_ARCH_PXA2XX_GPIO_H - -#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO24_CIF_FV 24 /* Camera frame start signal */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO25_CIF_LV 25 /* Camera line start signal */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO43_CIF_FV 43 /* Camera frame start signal */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO44_CIF_LV 44 /* Camera line start signal */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO84_CIF_FV 84 /* Camera frame start signal */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO85_CIF_LV 85 /* Camera line start signal */ -#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ -#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ -#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ -#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ -#define GPIO96_FFRXD 96 /* FFUART recieve */ -#define GPIO98_FFRTS 98 /* FFUART request to send */ -#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ -#define GPIO99_FFTXD 99 /* FFUART transmit data */ -#define GPIO100_FFCTS 100 /* FFUART Clear to send */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ -#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ -#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ -#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ -#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ -#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ -#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ -#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ -#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) -#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) -#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) -#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) -#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) -#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) -#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) -#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) -#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) -#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) -#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) -#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) -#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) -#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) -#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) -#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) -#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) -#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) -#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) -#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) -#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) -#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) -#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) -#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) -#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) -#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) -#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) -#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) -#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - -#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h deleted file mode 100644 index 73e0a329cf7f..000000000000 --- a/include/asm-arm/arch-pxa/pxa2xx-regs.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa2xx-regs.h - * - * Taken from pxa-regs.h by Russell King - * - * Author: Nicolas Pitre - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PXA2XX_REGS_H -#define __PXA2XX_REGS_H - -/* - * Memory controller - */ - -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -/* - * More handy macros for PCMCIA - * - * Arg is socket number - */ -#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */ -#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */ -#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */ - -/* MECR register defines */ -#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */ -#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */ - -#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ -#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ -#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ -#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ -#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ -#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ -#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ -#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ -#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ -#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ -#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ -#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ -#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ -#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - - -#ifdef CONFIG_PXA27x - -#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif - - -/* - * Power Manager - */ - -#define PMCR __REG(0x40F00000) /* Power Manager Control Register */ -#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ -#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ -#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ -#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ -#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ -#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ -#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ -#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ -#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ -#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ -#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ -#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ - -#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ -#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ -#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ -#define PCMD(x) __REG2(0x40F00080, (x)<<2) -#define PCMD0 __REG(0x40F00080 + 0 * 4) -#define PCMD1 __REG(0x40F00080 + 1 * 4) -#define PCMD2 __REG(0x40F00080 + 2 * 4) -#define PCMD3 __REG(0x40F00080 + 3 * 4) -#define PCMD4 __REG(0x40F00080 + 4 * 4) -#define PCMD5 __REG(0x40F00080 + 5 * 4) -#define PCMD6 __REG(0x40F00080 + 6 * 4) -#define PCMD7 __REG(0x40F00080 + 7 * 4) -#define PCMD8 __REG(0x40F00080 + 8 * 4) -#define PCMD9 __REG(0x40F00080 + 9 * 4) -#define PCMD10 __REG(0x40F00080 + 10 * 4) -#define PCMD11 __REG(0x40F00080 + 11 * 4) -#define PCMD12 __REG(0x40F00080 + 12 * 4) -#define PCMD13 __REG(0x40F00080 + 13 * 4) -#define PCMD14 __REG(0x40F00080 + 14 * 4) -#define PCMD15 __REG(0x40F00080 + 15 * 4) -#define PCMD16 __REG(0x40F00080 + 16 * 4) -#define PCMD17 __REG(0x40F00080 + 17 * 4) -#define PCMD18 __REG(0x40F00080 + 18 * 4) -#define PCMD19 __REG(0x40F00080 + 19 * 4) -#define PCMD20 __REG(0x40F00080 + 20 * 4) -#define PCMD21 __REG(0x40F00080 + 21 * 4) -#define PCMD22 __REG(0x40F00080 + 22 * 4) -#define PCMD23 __REG(0x40F00080 + 23 * 4) -#define PCMD24 __REG(0x40F00080 + 24 * 4) -#define PCMD25 __REG(0x40F00080 + 25 * 4) -#define PCMD26 __REG(0x40F00080 + 26 * 4) -#define PCMD27 __REG(0x40F00080 + 27 * 4) -#define PCMD28 __REG(0x40F00080 + 28 * 4) -#define PCMD29 __REG(0x40F00080 + 29 * 4) -#define PCMD30 __REG(0x40F00080 + 30 * 4) -#define PCMD31 __REG(0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -/* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable, - bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PCFR_PI2C_EN (0x1 << 6) - -#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ -#define PSSR_RDH (1 << 5) /* Read Disable Hold */ -#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ -#define PSSR_STS (1 << 3) /* Standby Mode Status */ -#define PSSR_VFS (1 << 2) /* VDD Fault Status */ -#define PSSR_BFS (1 << 1) /* Battery Fault Status */ -#define PSSR_SSS (1 << 0) /* Software Sleep Status */ - -#define PSLR_SL_ROD (1 << 20) /* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */ - -#define PCFR_RO (1 << 15) /* RDH Override */ -#define PCFR_PO (1 << 14) /* PH Override */ -#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */ -#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */ -#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */ -#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */ -#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */ -#define PCFR_GPR_EN (1 << 4) /* nRESET_GPIO Pin Enable */ -#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ -#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ -#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ -#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ - -#define RCSR_GPR (1 << 3) /* GPIO Reset */ -#define RCSR_SMR (1 << 2) /* Sleep Mode */ -#define RCSR_WDR (1 << 1) /* Watchdog Reset */ -#define RCSR_HWR (1 << 0) /* Hardware Reset */ - -#define PWER_GPIO(Nb) (1 << Nb) /* GPIO [0..15] wake-up enable */ -#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ -#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ -#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ -#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ -#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ -#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ -#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ -#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ -#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ -#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ -#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ -#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ -#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ -#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ -#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ -#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ -#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - -/* - * PXA2xx specific Core clock definitions - */ -#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ -#define CCSR __REG(0x4130000C) /* Core Clock Status Register */ -#define CKEN __REG(0x41300004) /* Clock Enable Register */ -#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ - -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ -#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ -#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ -#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ -#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ -#define CKEN_IM (20) /* Internal Memory Clock Enable */ -#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ -#define CKEN_USIM (18) /* USIM Unit Clock Enable */ -#define CKEN_MSL (17) /* MSL Unit Clock Enable */ -#define CKEN_LCD (16) /* LCD Unit Clock Enable */ -#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ -#define CKEN_I2C (14) /* I2C Unit Clock Enable */ -#define CKEN_FICP (13) /* FICP Unit Clock Enable */ -#define CKEN_MMC (12) /* MMC Unit Clock Enable */ -#define CKEN_USB (11) /* USB Unit Clock Enable */ -#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ -#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ -#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ -#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ -#define CKEN_I2S (8) /* I2S Unit Clock Enable */ -#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ -#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ -#define CKEN_STUART (5) /* STUART Unit Clock Enable */ -#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ -#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ -#define CKEN_SSP (3) /* SSP Unit Clock Enable */ -#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ -#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ -#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ -#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ - -#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ -#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - -#endif diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h deleted file mode 100644 index 2206cb61a9f9..000000000000 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef PXA2XX_SPI_H_ -#define PXA2XX_SPI_H_ - -#define PXA2XX_CS_ASSERT (0x01) -#define PXA2XX_CS_DEASSERT (0x02) - -/* device.platform_data for SSP controller devices */ -struct pxa2xx_spi_master { - u32 clock_enable; - u16 num_chipselect; - u8 enable_dma; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; - u8 enable_loopback; - void (*cs_control)(u32 command); -}; - -extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); - -#endif /*PXA2XX_SPI_H_*/ diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h deleted file mode 100644 index fe9364c83a28..000000000000 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa3xx-regs.h - * - * PXA3xx specific register definitions - * - * Copyright (C) 2007 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_PXA3XX_REGS_H -#define __ASM_ARCH_PXA3XX_REGS_H - -/* - * Oscillator Configuration Register (OSCC) - */ -#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ - -#define OSCC_PEN (1 << 11) /* 13MHz POUT */ - - -/* - * Service Power Management Unit (MPMU) - */ -#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ -#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ -#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ -#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ -#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ -#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ -#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ -#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ -#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ -#define PCMD(x) __REG(0x40F50110 + ((x) << 2)) - -/* - * Slave Power Managment Unit - */ -#define ASCR __REG(0x40f40000) /* Application Subsystem Power Status/Configuration */ -#define ARSR __REG(0x40f40004) /* Application Subsystem Reset Status */ -#define AD3ER __REG(0x40f40008) /* Application Subsystem Wake-Up from D3 Enable */ -#define AD3SR __REG(0x40f4000c) /* Application Subsystem Wake-Up from D3 Status */ -#define AD2D0ER __REG(0x40f40010) /* Application Subsystem Wake-Up from D2 to D0 Enable */ -#define AD2D0SR __REG(0x40f40014) /* Application Subsystem Wake-Up from D2 to D0 Status */ -#define AD2D1ER __REG(0x40f40018) /* Application Subsystem Wake-Up from D2 to D1 Enable */ -#define AD2D1SR __REG(0x40f4001c) /* Application Subsystem Wake-Up from D2 to D1 Status */ -#define AD1D0ER __REG(0x40f40020) /* Application Subsystem Wake-Up from D1 to D0 Enable */ -#define AD1D0SR __REG(0x40f40024) /* Application Subsystem Wake-Up from D1 to D0 Status */ -#define AGENP __REG(0x40f4002c) /* Application Subsystem General Purpose */ -#define AD3R __REG(0x40f40030) /* Application Subsystem D3 Configuration */ -#define AD2R __REG(0x40f40034) /* Application Subsystem D2 Configuration */ -#define AD1R __REG(0x40f40038) /* Application Subsystem D1 Configuration */ - -/* - * Application Subsystem Configuration bits. - */ -#define ASCR_RDH (1 << 31) -#define ASCR_D1S (1 << 2) -#define ASCR_D2S (1 << 1) -#define ASCR_D3S (1 << 0) - -/* - * Application Reset Status bits. - */ -#define ARSR_GPR (1 << 3) -#define ARSR_LPMR (1 << 2) -#define ARSR_WDT (1 << 1) -#define ARSR_HWR (1 << 0) - -/* - * Application Subsystem Wake-Up bits. - */ -#define ADXER_WRTC (1 << 31) /* RTC */ -#define ADXER_WOST (1 << 30) /* OS Timer */ -#define ADXER_WTSI (1 << 29) /* Touchscreen */ -#define ADXER_WUSBH (1 << 28) /* USB host */ -#define ADXER_WUSB2 (1 << 26) /* USB client 2.0 */ -#define ADXER_WMSL0 (1 << 24) /* MSL port 0*/ -#define ADXER_WDMUX3 (1 << 23) /* USB EDMUX3 */ -#define ADXER_WDMUX2 (1 << 22) /* USB EDMUX2 */ -#define ADXER_WKP (1 << 21) /* Keypad */ -#define ADXER_WUSIM1 (1 << 20) /* USIM Port 1 */ -#define ADXER_WUSIM0 (1 << 19) /* USIM Port 0 */ -#define ADXER_WOTG (1 << 16) /* USBOTG input */ -#define ADXER_MFP_WFLASH (1 << 15) /* MFP: Data flash busy */ -#define ADXER_MFP_GEN12 (1 << 14) /* MFP: MMC3/GPIO/OST inputs */ -#define ADXER_MFP_WMMC2 (1 << 13) /* MFP: MMC2 */ -#define ADXER_MFP_WMMC1 (1 << 12) /* MFP: MMC1 */ -#define ADXER_MFP_WI2C (1 << 11) /* MFP: I2C */ -#define ADXER_MFP_WSSP4 (1 << 10) /* MFP: SSP4 */ -#define ADXER_MFP_WSSP3 (1 << 9) /* MFP: SSP3 */ -#define ADXER_MFP_WMAXTRIX (1 << 8) /* MFP: matrix keypad */ -#define ADXER_MFP_WUART3 (1 << 7) /* MFP: UART3 */ -#define ADXER_MFP_WUART2 (1 << 6) /* MFP: UART2 */ -#define ADXER_MFP_WUART1 (1 << 5) /* MFP: UART1 */ -#define ADXER_MFP_WSSP2 (1 << 4) /* MFP: SSP2 */ -#define ADXER_MFP_WSSP1 (1 << 3) /* MFP: SSP1 */ -#define ADXER_MFP_WAC97 (1 << 2) /* MFP: AC97 */ -#define ADXER_WEXTWAKE1 (1 << 1) /* External Wake 1 */ -#define ADXER_WEXTWAKE0 (1 << 0) /* External Wake 0 */ - -/* - * AD3R/AD2R/AD1R bits. R2-R5 are only defined for PXA320. - */ -#define ADXR_L2 (1 << 8) -#define ADXR_R5 (1 << 5) -#define ADXR_R4 (1 << 4) -#define ADXR_R3 (1 << 3) -#define ADXR_R2 (1 << 2) -#define ADXR_R1 (1 << 1) -#define ADXR_R0 (1 << 0) - -/* - * Values for PWRMODE CP15 register - */ -#define PXA3xx_PM_S3D4C4 0x07 /* aka deep sleep */ -#define PXA3xx_PM_S2D3C4 0x06 /* aka sleep */ -#define PXA3xx_PM_S0D2C2 0x03 /* aka standby */ -#define PXA3xx_PM_S0D1C2 0x02 /* aka LCD refresh */ -#define PXA3xx_PM_S0D0C1 0x01 - -/* - * Application Subsystem Clock - */ -#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ -#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ -#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ -#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ -#define CKENB __REG(0x41340010) /* B Clock Enable Register */ -#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ - -/* - * Clock Enable Bit - */ -#define CKEN_LCD 1 /* < LCD Clock Enable */ -#define CKEN_USBH 2 /* < USB host clock enable */ -#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -#define CKEN_BOOT 11 /* < Boot rom clock enable */ -#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -#define CKEN_MMC2 13 /* < MMC2 clock enable */ -#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -#define CKEN_TPM 19 /* < TPM clock enable */ -#define CKEN_UDC 20 /* < UDC clock enable */ -#define CKEN_BTUART 21 /* < BTUART clock enable */ -#define CKEN_FFUART 22 /* < FFUART clock enable */ -#define CKEN_STUART 23 /* < STUART clock enable */ -#define CKEN_AC97 24 /* < AC97 clock enable */ -#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -#define CKEN_SSP1 26 /* < SSP1 clock enable */ -#define CKEN_SSP2 27 /* < SSP2 clock enable */ -#define CKEN_SSP3 28 /* < SSP3 clock enable */ -#define CKEN_SSP4 29 /* < SSP4 clock enable */ -#define CKEN_MSL0 30 /* < MSL0 clock enable */ -#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -#define CKEN_I2C 36 /* < I2C clock enable */ -#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -#define CKEN_GPIO 39 /* < GPIO clock enable */ -#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -#define CKEN_MINI_IM 48 /* < Mini-IM */ -#define CKEN_MINI_LCD 49 /* < Mini LCD */ - -#if defined(CONFIG_CPU_PXA310) -#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -#define CKEN_MVED 43 /* < MVED clock enable */ -#endif - -/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */ -#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */ - -#endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h deleted file mode 100644 index eb4b190b6657..000000000000 --- a/include/asm-arm/arch-pxa/pxa3xx_nand.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_ARCH_PXA3XX_NAND_H -#define __ASM_ARCH_PXA3XX_NAND_H - -#include -#include - -struct pxa3xx_nand_platform_data { - - /* the data flash bus is shared between the Static Memory - * Controller and the Data Flash Controller, the arbiter - * controls the ownership of the bus - */ - int enable_arbiter; - - struct mtd_partition *parts; - unsigned int nr_parts; -}; - -extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); -#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h deleted file mode 100644 index daf018d0c604..000000000000 --- a/include/asm-arm/arch-pxa/pxafb.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxafb.h - * - * Support for the xscale frame buffer. - * - * Author: Jean-Frederic Clere - * Created: Sep 22, 2003 - * Copyright: jfclere@sinix.net - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -/* - * Supported LCD connections - * - * bits 0 - 3: for LCD panel type: - * - * STN - for passive matrix - * DSTN - for dual scan passive matrix - * TFT - for active matrix - * - * bits 4 - 9 : for bus width - * bits 10-17 : for AC Bias Pin Frequency - * bit 18 : for output enable polarity - * bit 19 : for pixel clock edge - */ -#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) -#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) - -#define LCD_TYPE_UNKNOWN 0 -#define LCD_TYPE_MONO_STN 1 -#define LCD_TYPE_MONO_DSTN 2 -#define LCD_TYPE_COLOR_STN 3 -#define LCD_TYPE_COLOR_DSTN 4 -#define LCD_TYPE_COLOR_TFT 5 -#define LCD_TYPE_SMART_PANEL 6 -#define LCD_TYPE_MAX 7 - -#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) -#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) -#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) -#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) -#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) -#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) -#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) - -#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) -#define LCD_BIAS_ACTIVE_HIGH (0 << 17) -#define LCD_BIAS_ACTIVE_LOW (1 << 17) -#define LCD_PCLK_EDGE_RISE (0 << 18) -#define LCD_PCLK_EDGE_FALL (1 << 18) - -/* - * This structure describes the machine which we are running on. - * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine - * of linux/drivers/video/pxafb.c - */ -struct pxafb_mode_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_char bpp; - u_int cmap_greyscale:1, - depth:8, - unused:23; - - /* Parallel Mode Timing */ - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details - * Note: - * 1. all parameters in nanosecond (ns) - * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits - * in pxa27x and pxa3xx, initialize them to the same value or - * the larger one will be used - * 3. same to {rd,wr}_pulse_width - */ - unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ - unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ - unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ - unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ - unsigned cmd_inh_time; /* Command Inhibit time between two writes */ - unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ -}; - -struct pxafb_mach_info { - struct pxafb_mode_info *modes; - unsigned int num_modes; - - unsigned int lcd_conn; - - u_int fixed_modes:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - /* The following should be defined in LCCR0 - * LCCR0_Act or LCCR0_Pas Active or Passive - * LCCR0_Sngl or LCCR0_Dual Single/Dual panel - * LCCR0_Mono or LCCR0_Color Mono/Color - * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) - * LCCR0_DMADel(Tcpu) (optional) DMA request delay - * - * The following should not be defined in LCCR0: - * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM - * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB - */ - u_int lccr0; - /* The following should be defined in LCCR3 - * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity - * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type - * LCCR3_Acb(X) AB Bias pin frequency - * LCCR3_DPC (optional) Double Pixel Clock mode (untested) - * - * The following should not be defined in LCCR3 - * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp - */ - u_int lccr3; - /* The following should be defined in LCCR4 - * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 - * - * All other bits in LCCR4 should be left alone. - */ - u_int lccr4; - void (*pxafb_backlight_power)(int); - void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - void (*smart_update)(struct fb_info *); -}; -void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); -void set_pxa_fb_parent(struct device *parent_dev); -unsigned long pxafb_get_hsync_time(struct device *dev); - -extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); -extern int pxafb_smart_flush(struct fb_info *info); diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h deleted file mode 100644 index 820a189684a9..000000000000 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ /dev/null @@ -1,180 +0,0 @@ -#ifndef __ASM_ARCH_REGS_LCD_H -#define __ASM_ARCH_REGS_LCD_H - -#include - -/* - * LCD Controller Registers and Bits Definitions - */ -#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ -#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ -#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ -#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ -#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ -#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ -#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR (0x038) /* LCD Controller Status Register */ -#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ -#define TMEDCR (0x044) /* TMED Control Register */ - -#define CMDCR (0x100) /* Command Control Register */ -#define PRSR (0x104) /* Panel Read Status Register */ - -#define LCCR3_1BPP (0 << 24) -#define LCCR3_2BPP (1 << 24) -#define LCCR3_4BPP (2 << 24) -#define LCCR3_8BPP (3 << 24) -#define LCCR3_16BPP (4 << 24) -#define LCCR3_18BPP (5 << 24) -#define LCCR3_18BPP_P (6 << 24) -#define LCCR3_19BPP (7 << 24) -#define LCCR3_19BPP_P (1 << 29) -#define LCCR3_24BPP ((1 << 29) | (1 << 24)) -#define LCCR3_25BPP ((1 << 29) | (2 << 24)) - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - -#define LCCR4_PAL_FOR_0 (0 << 15) -#define LCCR4_PAL_FOR_1 (1 << 15) -#define LCCR4_PAL_FOR_2 (2 << 15) -#define LCCR4_PAL_FOR_MASK (3 << 15) - -#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */ -#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */ -#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ -#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */ -#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD panel type */ -#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ -#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ -#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ -#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ -#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ -#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ -#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ -#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) - -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ - -#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ -#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ -#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ -#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCSR_RD_ST (1 << 11) /* read status */ -#define LCSR_CMD_INT (1 << 12) /* command interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -/* smartpanel related */ -#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ -#define PRSR_A0 (1 << 8) /* Read Data Source */ -#define PRSR_ST_OK (1 << 9) /* Status OK */ -#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ - -#define SMART_CMD_A0 (0x1 << 8) -#define SMART_CMD_READ_STATUS_REG (0x0 << 9) -#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_COMMAND (0x1 << 9) -#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) -#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) -#define SMART_CMD_NOOP (0x4 << 9) -#define SMART_CMD_INTERRUPT (0x5 << 9) - -#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) -#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) -#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h deleted file mode 100644 index 3c04cde2cf1f..000000000000 --- a/include/asm-arm/arch-pxa/regs-ssp.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef __ASM_ARCH_REGS_SSP_H -#define __ASM_ARCH_REGS_SSP_H - -/* - * SSP Serial Port Registers - * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different. - * PXA255, PXA26x and PXA27x have extra ports, registers and bits. - */ - -#define SSCR0 (0x00) /* SSP Control Register 0 */ -#define SSCR1 (0x04) /* SSP Control Register 1 */ -#define SSSR (0x08) /* SSP Status Register */ -#define SSITR (0x0C) /* SSP Interrupt Test Register */ -#define SSDR (0x10) /* SSP Data Write/Data Read Register */ - -#define SSTO (0x28) /* SSP Time Out Register */ -#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */ -#define SSTSA (0x30) /* SSP Tx Timeslot Active */ -#define SSRSA (0x34) /* SSP Rx Timeslot Active */ -#define SSTSS (0x38) /* SSP Timeslot Status */ -#define SSACD (0x3C) /* SSP Audio Clock Divider */ - -#if defined(CONFIG_PXA3xx) -#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ -#endif - -/* Common PXA2xx bits first */ -#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ -#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ -#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */ -#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */ -#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */ -#define SSCR0_National (0x2 << 4) /* National Microwire */ -#define SSCR0_ECS (1 << 6) /* External clock select */ -#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ - -#if defined(CONFIG_PXA25x) -#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ - -#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ -#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ -#define SSCR0_EDSS (1 << 20) /* Extended data size select */ -#define SSCR0_NCS (1 << 21) /* Network clock select */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */ -#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */ -#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */ -#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */ -#define SSCR0_ADC (1 << 30) /* Audio clock select */ -#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ -#endif - -#if defined(CONFIG_PXA3xx) -#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ -#endif - -#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ -#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ -#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ -#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ -#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ -#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ - -#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ -#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ -#define SSSR_BSY (1 << 4) /* SSP Busy */ -#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */ -#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ -#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ - -#define SSCR0_TIM (1 << 23) /* Transmit FIFO Under Run Interrupt Mask */ -#define SSCR0_RIM (1 << 22) /* Receive FIFO Over Run interrupt Mask */ -#define SSCR0_NCS (1 << 21) /* Network Clock Select */ -#define SSCR0_EDSS (1 << 20) /* Extended Data Size Select */ - -/* extra bits in PXA255, PXA26x and PXA27x SSP ports */ -#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ -#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */ -#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */ -#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */ -#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */ -#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */ -#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */ -#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */ -#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */ -#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */ -#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */ -#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */ -#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */ -#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */ -#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */ -#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */ -#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */ -#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */ -#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */ - -#define SSSR_BCE (1 << 23) /* Bit Count Error */ -#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */ -#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */ -#define SSSR_EOC (1 << 20) /* End Of Chain */ -#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */ -#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */ - -#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */ -#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */ -#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */ -#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */ -#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */ -#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */ -#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */ -#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */ -#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */ - -#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ -#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ -#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ -#if defined(CONFIG_PXA3xx) -#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ -#endif - - -#endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h deleted file mode 100644 index 3b1d4a72d4d1..000000000000 --- a/include/asm-arm/arch-pxa/sharpsl.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * SharpSL SSP Driver - */ - -unsigned long corgi_ssp_ads7846_putget(unsigned long); -unsigned long corgi_ssp_ads7846_get(void); -void corgi_ssp_ads7846_put(unsigned long data); -void corgi_ssp_ads7846_lock(void); -void corgi_ssp_ads7846_unlock(void); -void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data); -void corgi_ssp_blduty_set(int duty); -int corgi_ssp_max1111_get(unsigned long data); - -/* - * SharpSL Touchscreen Driver - */ - -struct corgits_machinfo { - unsigned long (*get_hsync_invperiod)(void); - void (*put_hsync)(void); - void (*wait_hsync)(void); -}; - - -/* - * SharpSL Backlight - */ -extern void corgibl_limit_intensity(int limit); - - -/* - * SharpSL Battery/PM Driver - */ -extern void sharpsl_battery_kick(void); diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h deleted file mode 100644 index bd14365f7ed5..000000000000 --- a/include/asm-arm/arch-pxa/spitz.h +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Hardware specific definitions for SL-Cx000 series of PDAs - * - * Copyright (c) 2005 Alexander Wykes - * Copyright (c) 2005 Richard Purdie - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef __ASM_ARCH_SPITZ_H -#define __ASM_ARCH_SPITZ_H 1 -#endif - -#include - -/* Spitz/Akita GPIOs */ - -#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ -#define SPITZ_GPIO_RESET (1) -#define SPITZ_GPIO_nSD_DETECT (9) -#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ -#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ -#define SPITZ_GPIO_ADS7846_CS (14) -#define SPITZ_GPIO_SYNC (16) -#define SPITZ_GPIO_MAX1111_CS (20) -#define SPITZ_GPIO_FATAL_BAT (21) -#define SPITZ_GPIO_HSYNC (22) -#define SPITZ_GPIO_nSD_CLK (32) -#define SPITZ_GPIO_USB_DEVICE (35) -#define SPITZ_GPIO_USB_HOST (37) -#define SPITZ_GPIO_USB_CONNECT (41) -#define SPITZ_GPIO_LCDCON_CS (53) -#define SPITZ_GPIO_nPCE (54) -#define SPITZ_GPIO_nSD_WP (81) -#define SPITZ_GPIO_ON_RESET (89) -#define SPITZ_GPIO_BAT_COVER (90) -#define SPITZ_GPIO_CF_CD (94) -#define SPITZ_GPIO_ON_KEY (95) -#define SPITZ_GPIO_SWA (97) -#define SPITZ_GPIO_SWB (96) -#define SPITZ_GPIO_CHRG_FULL (101) -#define SPITZ_GPIO_CO (101) -#define SPITZ_GPIO_CF_IRQ (105) -#define SPITZ_GPIO_AC_IN (115) -#define SPITZ_GPIO_HP_IN (116) - -/* Spitz Only GPIOs */ - -#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ -#define SPITZ_GPIO_CF2_CD (93) - - -/* Spitz/Akita Keyboard Definitions */ - -#define SPITZ_KEY_STROBE_NUM (11) -#define SPITZ_KEY_SENSE_NUM (7) -#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 -#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 -#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 -#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 -#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 -#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 -#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 -#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 - -#define SPITZ_GPIO_KEY_STROBE0 88 -#define SPITZ_GPIO_KEY_STROBE1 23 -#define SPITZ_GPIO_KEY_STROBE2 24 -#define SPITZ_GPIO_KEY_STROBE3 25 -#define SPITZ_GPIO_KEY_STROBE4 26 -#define SPITZ_GPIO_KEY_STROBE5 27 -#define SPITZ_GPIO_KEY_STROBE6 52 -#define SPITZ_GPIO_KEY_STROBE7 103 -#define SPITZ_GPIO_KEY_STROBE8 107 -#define SPITZ_GPIO_KEY_STROBE9 108 -#define SPITZ_GPIO_KEY_STROBE10 114 - -#define SPITZ_GPIO_KEY_SENSE0 12 -#define SPITZ_GPIO_KEY_SENSE1 17 -#define SPITZ_GPIO_KEY_SENSE2 91 -#define SPITZ_GPIO_KEY_SENSE3 34 -#define SPITZ_GPIO_KEY_SENSE4 36 -#define SPITZ_GPIO_KEY_SENSE5 38 -#define SPITZ_GPIO_KEY_SENSE6 39 - - -/* Spitz Scoop Device (No. 1) GPIOs */ -/* Suspend States in comments */ -#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ -#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ -#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ -#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ -#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ -#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ -#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ -#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ -#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ - -#define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ - SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ - SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) -#define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) -#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) -#define SPITZ_SCP_SUS_SET 0 - -/* Spitz Scoop Device (No. 2) GPIOs */ -/* Suspend States in comments */ -#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ -#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ -#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ -#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ -#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ -#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ -#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ -#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ -#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ - -#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ - SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ - SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) - -#define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) -#define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ - SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) - - -/* Spitz IRQ Definitions */ - -#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) -#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) -#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) -#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) - -/* - * Shared data structures - */ -extern struct platform_device spitzscoop_device; -extern struct platform_device spitzscoop2_device; -extern struct platform_device spitzssp_device; -extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/include/asm-arm/arch-pxa/ssp.h b/include/asm-arm/arch-pxa/ssp.h deleted file mode 100644 index a012882c9ee6..000000000000 --- a/include/asm-arm/arch-pxa/ssp.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * ssp.h - * - * Copyright (C) 2003 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver supports the following PXA CPU/SSP ports:- - * - * PXA250 SSP - * PXA255 SSP, NSSP - * PXA26x SSP, NSSP, ASSP - * PXA27x SSP1, SSP2, SSP3 - * PXA3xx SSP1, SSP2, SSP3, SSP4 - */ - -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H - -#include - -enum pxa_ssp_type { - SSP_UNDEFINED = 0, - PXA25x_SSP, /* pxa 210, 250, 255, 26x */ - PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ - PXA27x_SSP, -}; - -struct ssp_device { - struct platform_device *pdev; - struct list_head node; - - struct clk *clk; - void __iomem *mmio_base; - unsigned long phys_base; - - const char *label; - int port_id; - int type; - int use_count; - int irq; - int drcmr_rx; - int drcmr_tx; -}; - -/* - * SSP initialisation flags - */ -#define SSP_NO_IRQ 0x1 /* don't register an irq handler in SSP driver */ - -struct ssp_state { - u32 cr0; - u32 cr1; - u32 to; - u32 psp; -}; - -struct ssp_dev { - struct ssp_device *ssp; - u32 port; - u32 mode; - u32 flags; - u32 psp_flags; - u32 speed; - int irq; -}; - -int ssp_write_word(struct ssp_dev *dev, u32 data); -int ssp_read_word(struct ssp_dev *dev, u32 *data); -int ssp_flush(struct ssp_dev *dev); -void ssp_enable(struct ssp_dev *dev); -void ssp_disable(struct ssp_dev *dev); -void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp); -void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp); -int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags); -int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed); -void ssp_exit(struct ssp_dev *dev); - -struct ssp_device *ssp_request(int port, const char *label); -void ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h deleted file mode 100644 index 6956fc5235f8..000000000000 --- a/include/asm-arm/arch-pxa/system.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/system.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include "hardware.h" -#include "pxa2xx-regs.h" -#include "pxa-regs.h" - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - - -void arch_reset(char mode); diff --git a/include/asm-arm/arch-pxa/timex.h b/include/asm-arm/arch-pxa/timex.h deleted file mode 100644 index 8d882f0b6a16..000000000000 --- a/include/asm-arm/arch-pxa/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/timex.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -#if defined(CONFIG_PXA25x) -/* PXA250/210 timer base */ -#define CLOCK_TICK_RATE 3686400 -#elif defined(CONFIG_PXA27x) -/* PXA27x timer base */ -#ifdef CONFIG_MACH_MAINSTONE -#define CLOCK_TICK_RATE 3249600 -#else -#define CLOCK_TICK_RATE 3250000 -#endif -#else -#define CLOCK_TICK_RATE 3250000 -#endif diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h deleted file mode 100644 index a72803f0461b..000000000000 --- a/include/asm-arm/arch-pxa/tosa.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Hardware specific definitions for Sharp SL-C6000x series of PDAs - * - * Copyright (c) 2005 Dirk Opfer - * - * Based on Sharp's 2.4 kernel patches - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef _ASM_ARCH_TOSA_H_ -#define _ASM_ARCH_TOSA_H_ 1 - -/* TOSA Chip selects */ -#define TOSA_LCDC_PHYS PXA_CS4_PHYS -/* Internel Scoop */ -#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) -/* Jacket Scoop */ -#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) - -/* - * SCOOP2 internal GPIOs - */ -#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO -#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) -#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) -#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) -#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) -#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) -#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) -#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 - -/* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ - TOSA_SCOOP_AUD_PWR_ON) - -/* - * SCOOP2 jacket GPIOs - */ -#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) -#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) -#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) -#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) -#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) -#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) -#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 -#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) -#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 - -/* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) - -/* - * TC6393XB GPIOs - */ -#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) -#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) -#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) - -#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) -#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) -#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) -#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) -#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) -#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) -#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) -#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) -#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) -#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) -#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) -#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) - -/* - * Timing Generator - */ -#define TG_PNLCTL 0x00 -#define TG_TPOSCTL 0x01 -#define TG_DUTYCTL 0x02 -#define TG_GPOSR 0x03 -#define TG_GPODR1 0x04 -#define TG_GPODR2 0x05 -#define TG_PINICTL 0x06 -#define TG_HPOSCTL 0x07 - -/* - * PXA GPIOs - */ -#define TOSA_GPIO_POWERON (0) -#define TOSA_GPIO_RESET (1) -#define TOSA_GPIO_AC_IN (2) -#define TOSA_GPIO_RECORD_BTN (3) -#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ -#define TOSA_GPIO_USB_IN (5) -#define TOSA_GPIO_JACKET_DETECT (7) -#define TOSA_GPIO_nSD_DETECT (9) -#define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393XB_CLK (11) -#define TOSA_GPIO_BAT1_CRG (12) -#define TOSA_GPIO_CF_CD (13) -#define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393XB_INT (15) -#define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393XB_RDY (18) -#define TOSA_GPIO_ON_RESET (19) -#define TOSA_GPIO_EAR_IN (20) -#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ -#define TOSA_GPIO_ON_KEY (22) -#define TOSA_GPIO_VGA_LINE (27) -#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ -#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ -#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ -#define TOSA_GPIO_IRDA_TX (47) -#define TOSA_GPIO_TG_SPI_SCLK (81) -#define TOSA_GPIO_TG_SPI_CS (82) -#define TOSA_GPIO_TG_SPI_MOSI (83) -#define TOSA_GPIO_BAT1_LOW (84) - -#define TOSA_GPIO_HP_IN GPIO_EAR_IN - -#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW - -#define TOSA_KEY_STROBE_NUM (11) -#define TOSA_KEY_SENSE_NUM (7) - -#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) -#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) -#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) -#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) -#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) -#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) -#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) -#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) -#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) -#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) -#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) - -/* - * Interrupts - */ -#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) -#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) -#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) -#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) -#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) -#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) -#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) -#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) -#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) -#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) -#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) -#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) -#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) -#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) -#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) -#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) -#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) -#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) -#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) -#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) -#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) - -#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) - -#define TOSA_KEY_SYNC KEY_102ND /* ??? */ - -#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES -#define TOSA_KEY_RECORD KEY_YEN -#define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA -#define TOSA_KEY_CANCEL KEY_ESC -#define TOSA_KEY_CENTER KEY_HIRAGANA -#define TOSA_KEY_OK KEY_HENKAN -#define TOSA_KEY_CALENDAR KEY_KATAKANAHIRAGANA -#define TOSA_KEY_HOMEPAGE KEY_HANGEUL -#define TOSA_KEY_LIGHT KEY_MUHENKAN -#define TOSA_KEY_MENU KEY_HANJA -#define TOSA_KEY_FN KEY_RIGHTALT -#define TOSA_KEY_MAIL KEY_ZENKAKUHANKAKU -#else -#define TOSA_KEY_RECORD KEY_RECORD -#define TOSA_KEY_ADDRESSBOOK KEY_ADDRESSBOOK -#define TOSA_KEY_CANCEL KEY_CANCEL -#define TOSA_KEY_CENTER KEY_SELECT /* ??? */ -#define TOSA_KEY_OK KEY_OK -#define TOSA_KEY_CALENDAR KEY_CALENDAR -#define TOSA_KEY_HOMEPAGE KEY_HOMEPAGE -#define TOSA_KEY_LIGHT KEY_KBDILLUMTOGGLE -#define TOSA_KEY_MENU KEY_MENU -#define TOSA_KEY_FN KEY_FN -#define TOSA_KEY_MAIL KEY_MAIL -#endif - -#endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h deleted file mode 100644 index efc3c3d3b75d..000000000000 --- a/include/asm-arm/arch-pxa/tosa_bt.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Tosa bluetooth built-in chip control. - * - * Later it may be shared with some other platforms. - * - * Copyright (c) 2008 Dmitry Baryshkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#ifndef TOSA_BT_H -#define TOSA_BT_H - -struct tosa_bt_data { - int gpio_pwr; - int gpio_reset; -}; - -#endif - diff --git a/include/asm-arm/arch-pxa/trizeps4.h b/include/asm-arm/arch-pxa/trizeps4.h deleted file mode 100644 index 641d0ec110bb..000000000000 --- a/include/asm-arm/arch-pxa/trizeps4.h +++ /dev/null @@ -1,106 +0,0 @@ -/************************************************************************ - * Include file for TRIZEPS4 SoM and ConXS eval-board - * Copyright (c) Jürgen Schindele - * 2006 - ************************************************************************/ - -/* - * Includes/Defines - */ -#ifndef _TRIPEPS4_H_ -#define _TRIPEPS4_H_ - -/* physical memory regions */ -#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */ -#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */ -#define TRIZEPS4_ETH_PHYS (PXA_CS2_PHYS) /* Ethernet DM9000 region */ -#define TRIZEPS4_PIC_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board */ -#define TRIZEPS4_SDRAM_BASE 0xa0000000 /* SDRAM region */ - -#define TRIZEPS4_CFSR_PHYS (PXA_CS3_PHYS) /* Logic chip on ConXS-Board CSFR register */ -#define TRIZEPS4_BOCR_PHYS (PXA_CS3_PHYS+0x02000000) /* Logic chip on ConXS-Board BOCR register */ -#define TRIZEPS4_IRCR_PHYS (PXA_CS3_PHYS+0x02400000) /* Logic chip on ConXS-Board IRCR register*/ -#define TRIZEPS4_UPSR_PHYS (PXA_CS3_PHYS+0x02800000) /* Logic chip on ConXS-Board UPSR register*/ -#define TRIZEPS4_DICR_PHYS (PXA_CS3_PHYS+0x03800000) /* Logic chip on ConXS-Board DICR register*/ - -/* virtual memory regions */ -#define TRIZEPS4_DISK_VIRT 0xF0000000 /* Disk On Chip region */ - -#define TRIZEPS4_PIC_VIRT 0xF0100000 /* not used */ -#define TRIZEPS4_CFSR_VIRT 0xF0100000 -#define TRIZEPS4_BOCR_VIRT 0xF0200000 -#define TRIZEPS4_DICR_VIRT 0xF0300000 -#define TRIZEPS4_IRCR_VIRT 0xF0400000 -#define TRIZEPS4_UPSR_VIRT 0xF0500000 - -/* size of flash */ -#define TRIZEPS4_FLASH_SIZE 0x02000000 /* Flash size 32 MB */ - -/* Ethernet Controller Davicom DM9000 */ -#define GPIO_DM9000 101 -#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000) - -/* UCB1400 audio / TS-controller */ -#define GPIO_UCB1400 1 -#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400) - -/* PCMCIA socket Compact Flash */ -#define GPIO_PCD 11 /* PCMCIA Card Detect */ -#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD) -#define GPIO_PRDY 13 /* READY / nINT */ -#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY) - -/* MMC socket */ -#define GPIO_MMC_DET 12 -#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET) - -/* LEDS using tx2 / rx2 */ -#define GPIO_SYS_BUSY_LED 46 -#define GPIO_HEARTBEAT_LED 47 - -/* Off-module PIC on ConXS board */ -#define GPIO_PIC 0 -#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC) - -#define CFSR_P2V(x) ((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT) -#define CFSR_V2P(x) ((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS) - -#define BCR_P2V(x) ((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT) -#define BCR_V2P(x) ((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS) - -#define DCR_P2V(x) ((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT) -#define DCR_V2P(x) ((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS) - -#ifndef __ASSEMBLY__ -#define ConXS_CFSR (*((volatile unsigned short *)CFSR_P2V(0x0C000000))) -#define ConXS_BCR (*((volatile unsigned short *)BCR_P2V(0x0E000000))) -#define ConXS_DCR (*((volatile unsigned short *)DCR_P2V(0x0F800000))) -#else -#define ConXS_CFSR CFSR_P2V(0x0C000000) -#define ConXS_BCR BCR_P2V(0x0E000000) -#define ConXS_DCR DCR_P2V(0x0F800000) -#endif - -#define ConXS_CFSR_BVD_MASK 0x0003 -#define ConXS_CFSR_BVD1 (1 << 0) -#define ConXS_CFSR_BVD2 (1 << 1) -#define ConXS_CFSR_VS_MASK 0x000C -#define ConXS_CFSR_VS1 (1 << 2) -#define ConXS_CFSR_VS2 (1 << 3) -#define ConXS_CFSR_VS_5V (0x3 << 2) -#define ConXS_CFSR_VS_3V3 0x0 - -#define ConXS_BCR_S0_POW_EN0 (1 << 0) -#define ConXS_BCR_S0_POW_EN1 (1 << 1) -#define ConXS_BCR_L_DISP (1 << 4) -#define ConXS_BCR_CF_BUF_EN (1 << 5) -#define ConXS_BCR_CF_RESET (1 << 7) -#define ConXS_BCR_S0_VCC_3V3 0x1 -#define ConXS_BCR_S0_VCC_5V0 0x2 -#define ConXS_BCR_S0_VPP_12V 0x4 -#define ConXS_BCR_S0_VPP_3V3 0x8 - -#define ConXS_IRCR_MODE (1 << 0) -#define ConXS_IRCR_SD (1 << 1) - -#endif /* _TRIPEPS4_H_ */ diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h deleted file mode 100644 index 27aa3a91012f..000000000000 --- a/include/asm-arm/arch-pxa/udc.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/udc.h - * - */ -#include - -extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); - diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h deleted file mode 100644 index f4551269aaf2..000000000000 --- a/include/asm-arm/arch-pxa/uncompress.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/uncompress.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#define __REG(x) ((volatile unsigned long *)x) - -static volatile unsigned long *UART = FFUART; - -static inline void putc(char c) -{ - if (!(UART[UART_IER] & IER_UUE)) - return; - while (!(UART[UART_LSR] & LSR_TDRQ)) - barrier(); - UART[UART_TX] = c; -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - if (machine_is_littleton()) - UART = STUART; -} - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pxa/vmalloc.h b/include/asm-arm/arch-pxa/vmalloc.h deleted file mode 100644 index 5bb450c7aa2c..000000000000 --- a/include/asm-arm/arch-pxa/vmalloc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/vmalloc.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h deleted file mode 100644 index 0d35ca04731e..000000000000 --- a/include/asm-arm/arch-pxa/zylonite.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef __ASM_ARCH_ZYLONITE_H -#define __ASM_ARCH_ZYLONITE_H - -#define ZYLONITE_ETH_PHYS 0x14000000 - -#define EXT_GPIO(x) (128 + (x)) - -/* the following variables are processor specific and initialized - * by the corresponding zylonite_pxa3xx_init() - */ -struct platform_mmc_slot { - int gpio_cd; - int gpio_wp; -}; - -extern struct platform_mmc_slot zylonite_mmc_slot[]; - -extern int gpio_eth_irq; -extern int gpio_debug_led1; -extern int gpio_debug_led2; - -extern int wm9713_irq; - -extern int lcd_id; -extern int lcd_orientation; - -#ifdef CONFIG_CPU_PXA300 -extern void zylonite_pxa300_init(void); -#else -static inline void zylonite_pxa300_init(void) -{ - if (cpu_is_pxa300() || cpu_is_pxa310()) - panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__); -} -#endif - -#ifdef CONFIG_CPU_PXA320 -extern void zylonite_pxa320_init(void); -#else -static inline void zylonite_pxa320_init(void) -{ - if (cpu_is_pxa320()) - panic("%s: PXA320 not supported\n", __FUNCTION__); -} -#endif - -#endif /* __ASM_ARCH_ZYLONITE_H */ diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h deleted file mode 100644 index 206f7a752882..000000000000 --- a/include/asm-arm/arch-realview/board-eb.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-eb.h - * - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_EB_H -#define __ASM_ARCH_BOARD_EB_H - -#include - -/* - * RealView EB + ARM11MPCore peripheral addresses - */ -#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ - -#define REALVIEW_EB_FLASH_BASE 0x40000000 -#define REALVIEW_EB_FLASH_SIZE SZ_64M -#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ - -#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ -#else -#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000700 -#define REALVIEW_EB11MP_TWD_SIZE 0x00000100 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ -#endif - -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -#define IRQ_EB11MP_UART2 -1 -#define IRQ_EB11MP_UART3 -1 -#define IRQ_EB11MP_CLCD -1 -#define IRQ_EB11MP_DMA -1 -#define IRQ_EB11MP_WDOG -1 -#define IRQ_EB11MP_GPIO0 -1 -#define IRQ_EB11MP_GPIO1 -1 -#define IRQ_EB11MP_GPIO2 -1 -#define IRQ_EB11MP_SCI -1 -#define IRQ_EB11MP_SSP -1 - -#define NR_GIC_EB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_EB - */ -#define NR_IRQS_EB (IRQ_EB_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_EB) \ - && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB)) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_EB -#endif - -#if defined(CONFIG_REALVIEW_EB_ARM11MP) \ - && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP)) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_EB11MP -#endif - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_EB_PROC_MASK 0xFF000000 -#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_EB_PROC_ARM9 0x02000000 -#define REALVIEW_EB_PROC_ARM11 0x04000000 -#define REALVIEW_EB_PROC_ARM11MP 0x06000000 - -#define check_eb_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_REALVIEW_EB_ARM11MP -#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) -#else -#define core_tile_eb11mp() 0 -#endif - -#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h deleted file mode 100644 index 48ce9c833705..000000000000 --- a/include/asm-arm/arch-realview/board-pb1176.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-pb1176.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB1176_H -#define __ASM_ARCH_BOARD_PB1176_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ -#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ -#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ -#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_PB1176_FLASH_BASE 0x30000000 -#define REALVIEW_PB1176_FLASH_SIZE SZ_64M - -#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ -#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ -#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ -#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ -#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ -#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ -#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ -#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ -#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ -#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ -#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ -#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ -#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ -#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ - -/* - * PCI regions - */ -#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ -#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ -#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ -#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ -#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ -#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ - -#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ - -#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ -#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ -#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ -#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ -#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ - -/* - * Irqs - */ -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 -#define IRQ_PB1176_SCTL -1 - -#define NR_GIC_PB1176 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB1176 - */ -#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB1176) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB1176 -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB1176 -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB1176 */ - -#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h deleted file mode 100644 index a1294d915fa8..000000000000 --- a/include/asm-arm/arch-realview/board-pb11mp.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * include/asm-arm/arch-realview/board-pb11mp.h - * - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB11MP_H -#define __ASM_ARCH_BOARD_PB11MP_H - -#include - -/* - * Peripheral addresses - */ -#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ -#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ -#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 -#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M -#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 -#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M -#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 - -/* - * PB11MPCore PCI regions - */ -#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Testchip peripheral and fpga gic regions - */ -#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ -#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 -#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 -#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ -#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ - -/* - * Irqs - */ -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PB11MP_SMC -1 -#define IRQ_PB11MP_SCTL -1 - -#define NR_GIC_PB11MP 2 - -/* - * Only define NR_IRQS if less than NR_IRQS_PB11MP - */ -#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) - -#if defined(CONFIG_MACH_REALVIEW_PB11MP) - -#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) -#undef NR_IRQS -#define NR_IRQS NR_IRQS_PB11MP -#endif - -#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) -#undef MAX_GIC_NR -#define MAX_GIC_NR NR_GIC_PB11MP -#endif - -#endif /* CONFIG_MACH_REALVIEW_PB11MP */ - -#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S deleted file mode 100644 index c8c860c3c26e..000000000000 --- a/include/asm-arm/arch-realview/debug-macro.S +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-realview/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 - .endm - -#include diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h deleted file mode 100644 index 8342e3f9d6ec..000000000000 --- a/include/asm-arm/arch-realview/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/dma.h - * - * Copyright (C) 2003 ARM Limited. - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S deleted file mode 100644 index 31a39a7cdaa9..000000000000 --- a/include/asm-arm/arch-realview/entry-macro.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * include/asm-arm/arch-realview/entry-macro.S - * - * Low-level IRQ helper macros for RealView platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h deleted file mode 100644 index 1ee8313ceb6a..000000000000 --- a/include/asm-arm/arch-realview/hardware.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/hardware.h - * - * This file contains the hardware definitions of the RealView boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) -#define __io_address(n) __io(IO_ADDRESS(n)) - -#endif diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h deleted file mode 100644 index c70f1dfbe135..000000000000 --- a/include/asm-arm/arch-realview/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h deleted file mode 100644 index ccbac59235c6..000000000000 --- a/include/asm-arm/arch-realview/irqs.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include -#include -#include - -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 - -#define IRQ_GIC_START 32 - -#ifndef NR_IRQS -#error "NR_IRQS not defined by the board-specific files" -#endif - -#endif diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h deleted file mode 100644 index ed370abb638f..000000000000 --- a/include/asm-arm/arch-realview/memory.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h deleted file mode 100644 index 424c0aaf46a0..000000000000 --- a/include/asm-arm/arch-realview/platform.h +++ /dev/null @@ -1,293 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PLATFORM_H -#define __ASM_ARCH_PLATFORM_H - -/* - * Memory definitions - */ -#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define REALVIEW_BOOT_ROM_HI 0x30000000 -#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ -#define REALVIEW_BOOT_ROM_SIZE SZ_64M - -#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ -#define REALVIEW_SSRAM_SIZE SZ_2M - -/* - * SDRAM - */ -#define REALVIEW_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * RealView Registers - * ------------------------------------------------------------------------ - * - */ -#define REALVIEW_SYS_ID_OFFSET 0x00 -#define REALVIEW_SYS_SW_OFFSET 0x04 -#define REALVIEW_SYS_LED_OFFSET 0x08 -#define REALVIEW_SYS_OSC0_OFFSET 0x0C - -#define REALVIEW_SYS_OSC1_OFFSET 0x10 -#define REALVIEW_SYS_OSC2_OFFSET 0x14 -#define REALVIEW_SYS_OSC3_OFFSET 0x18 -#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ - -#define REALVIEW_SYS_LOCK_OFFSET 0x20 -#define REALVIEW_SYS_100HZ_OFFSET 0x24 -#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 -#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C -#define REALVIEW_SYS_FLAGS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 -#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C -#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 -#define REALVIEW_SYS_PCICTL_OFFSET 0x44 -#define REALVIEW_SYS_MCI_OFFSET 0x48 -#define REALVIEW_SYS_FLASH_OFFSET 0x4C -#define REALVIEW_SYS_CLCD_OFFSET 0x50 -#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 -#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 -#define REALVIEW_SYS_24MHz_OFFSET 0x5C -#define REALVIEW_SYS_MISC_OFFSET 0x60 -#define REALVIEW_SYS_IOSEL_OFFSET 0x70 -#define REALVIEW_SYS_PROCID_OFFSET 0x84 -#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 -#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 -#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 -#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC -#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 - -#define REALVIEW_SYS_BASE 0x10000000 -#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) -#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) -#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) -#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) -#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) - -#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) -#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) -#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) -#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) -#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) -#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) -#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) -#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) -#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) -#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) -#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) -#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) -#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) -#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) -#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) -#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) -#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) -#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) -#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) -#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) -#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) -#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) -#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) -#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) -#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) -#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) - -/* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_SYS_CTRL_LED (1 << 0) - - -/* ------------------------------------------------------------------------ - * RealView control registers - * ------------------------------------------------------------------------ - */ - -/* - * REALVIEW_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * REALVIEW_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ - -/* - * REALVIEW_SYS_FLASH - */ -#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * REALVIEW_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * RealView common peripheral addresses - */ -#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ -#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ -#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ -#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ -#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ -#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ -#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ -#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ -#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ - -/* PCI space */ -#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ -#define REALVIEW_PCI_CFG_BASE 0x42000000 -#define REALVIEW_PCI_MEM_BASE0 0x44000000 -#define REALVIEW_PCI_MEM_BASE1 0x50000000 -#define REALVIEW_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define REALVIEW_PCI_BASE_SIZE 0x01000000 -#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 -#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * Disk on Chip - */ -#define REALVIEW_DOC_BASE 0x2C000000 -#define REALVIEW_DOC_SIZE (16 << 20) -#define REALVIEW_DOC_PAGE_SIZE 512 -#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define REALVIEW_SYS_LED0 (1 << 0) -#define REALVIEW_SYS_LED1 (1 << 1) -#define REALVIEW_SYS_LED2 (1 << 2) -#define REALVIEW_SYS_LED3 (1 << 3) -#define REALVIEW_SYS_LED4 (1 << 4) -#define REALVIEW_SYS_LED5 (1 << 5) -#define REALVIEW_SYS_LED6 (1 << 6) -#define REALVIEW_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK REALVIEW_SYS_LED - -/* - * Control registers - */ -#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ -#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ -#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ - -/* - * Application Flash - * - */ -#define FLASH_BASE REALVIEW_FLASH_BASE -#define FLASH_SIZE REALVIEW_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE REALVIEW_BOOT_ROM_HI -#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * System controller bit assignment - */ -#define REALVIEW_REFCLK 0 -#define REALVIEW_TIMCLK 1 - -#define REALVIEW_TIMER1_EnSel 15 -#define REALVIEW_TIMER2_EnSel 17 -#define REALVIEW_TIMER3_EnSel 19 -#define REALVIEW_TIMER4_EnSel 21 - - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define REALVIEW_CSR_BASE 0x10000000 -#define REALVIEW_CSR_SIZE 0x10000000 - -#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h deleted file mode 100644 index d55802d645af..000000000000 --- a/include/asm-arm/arch-realview/scu.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ASMARM_ARCH_SCU_H -#define __ASMARM_ARCH_SCU_H - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/include/asm-arm/arch-realview/smp.h b/include/asm-arm/arch-realview/smp.h deleted file mode 100644 index 515819efd046..000000000000 --- a/include/asm-arm/arch-realview/smp.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef ASMARM_ARCH_SMP_H -#define ASMARM_ARCH_SMP_H - - -#include - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - -/* - * We use IRQ1 as the IPI - */ -static inline void smp_cross_call(cpumask_t callmap) -{ - gic_raise_softirq(callmap, 1); -} - -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(cpumask_t callmap) -{ -} - -#endif diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h deleted file mode 100644 index bff3d3fcf846..000000000000 --- a/include/asm-arm/arch-realview/system.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); -} - -#endif diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h deleted file mode 100644 index 5b9d82d0a5e0..000000000000 --- a/include/asm-arm/arch-realview/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/timex.h - * - * RealView architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h deleted file mode 100644 index 3f7ae2e0260d..000000000000 --- a/include/asm-arm/arch-realview/uncompress.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include - -#include -#include -#include - -#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) -#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) -#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) -#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) - -/* - * Return the UART base address - */ -static inline unsigned long get_uart_base(void) -{ - if (machine_is_realview_eb()) - return REALVIEW_EB_UART0_BASE; - else if (machine_is_realview_pb11mp()) - return REALVIEW_PB11MP_UART0_BASE; - else if (machine_is_realview_pb1176()) - return REALVIEW_PB1176_UART0_BASE; - else - return 0; -} - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 5)) - barrier(); - - AMBA_UART_DR(base) = c; -} - -static inline void flush(void) -{ - unsigned long base = get_uart_base(); - - while (AMBA_UART_FR(base) & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h deleted file mode 100644 index 0ad49af186af..000000000000 --- a/include/asm-arm/arch-realview/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-realview/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/include/asm-arm/arch-rpc/acornfb.h b/include/asm-arm/arch-rpc/acornfb.h deleted file mode 100644 index ecb7733a0949..000000000000 --- a/include/asm-arm/arch-rpc/acornfb.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/acornfb.h - * - * Copyright (C) 1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * AcornFB architecture specific code - */ - -#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel) - -static inline int -acornfb_valid_pixrate(struct fb_var_screeninfo *var) -{ - u_long limit; - - if (!var->pixclock) - return 0; - - /* - * Limits below are taken from RISC OS bandwidthlimit file - */ - if (current_par.using_vram) { - if (current_par.vram_half_sam == 2048) - limit = 6578; - else - limit = 13157; - } else { - limit = 26315; - } - - return acornfb_bandwidth(var) >= limit; -} - -/* - * Try to find the best PLL parameters for the pixel clock. - * This algorithm seems to give best predictable results, - * and produces the same values as detailed in the VIDC20 - * data sheet. - */ -static inline u_int -acornfb_vidc20_find_pll(u_int pixclk) -{ - u_int r, best_r = 2, best_v = 2; - int best_d = 0x7fffffff; - - for (r = 2; r <= 32; r++) { - u_int rr, v, p; - int d; - - rr = 41667 * r; - - v = (rr + pixclk / 2) / pixclk; - - if (v > 32 || v < 2) - continue; - - p = (rr + v / 2) / v; - - d = pixclk - p; - - if (d < 0) - d = -d; - - if (d < best_d) { - best_d = d; - best_v = v - 1; - best_r = r - 1; - } - - if (d == 0) - break; - } - - return best_v << 8 | best_r; -} - -static inline void -acornfb_vidc20_find_rates(struct vidc_timing *vidc, - struct fb_var_screeninfo *var) -{ - u_int div; - - /* Select pixel-clock divisor to keep PLL in range */ - div = var->pixclock / 9090; /*9921*/ - - /* Limit divisor */ - if (div == 0) - div = 1; - if (div > 8) - div = 8; - - /* Encode divisor to VIDC20 setting */ - switch (div) { - case 1: vidc->control |= VIDC20_CTRL_PIX_CK; break; - case 2: vidc->control |= VIDC20_CTRL_PIX_CK2; break; - case 3: vidc->control |= VIDC20_CTRL_PIX_CK3; break; - case 4: vidc->control |= VIDC20_CTRL_PIX_CK4; break; - case 5: vidc->control |= VIDC20_CTRL_PIX_CK5; break; - case 6: vidc->control |= VIDC20_CTRL_PIX_CK6; break; - case 7: vidc->control |= VIDC20_CTRL_PIX_CK7; break; - case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break; - } - - /* - * With VRAM, the FIFO can be set to the highest possible setting - * because there are no latency considerations for other memory - * accesses. However, in 64 bit bus mode the FIFO preload value - * must not be set to VIDC20_CTRL_FIFO_28 because this will let - * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the - * FIFO preload value). - */ - if (current_par.using_vram) { - if (current_par.vram_half_sam == 2048) - vidc->control |= VIDC20_CTRL_FIFO_24; - else - vidc->control |= VIDC20_CTRL_FIFO_28; - } else { - unsigned long bandwidth = acornfb_bandwidth(var); - - /* Encode bandwidth as VIDC20 setting */ - if (bandwidth > 33334) /* < 30.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_16; - else if (bandwidth > 26666) /* < 37.5MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_20; - else if (bandwidth > 22222) /* < 45.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_24; - else /* > 45.0MB/s */ - vidc->control |= VIDC20_CTRL_FIFO_28; - } - - /* Find the PLL values */ - vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div); -} - -#define acornfb_default_control() (VIDC20_CTRL_PIX_VCLK) -#define acornfb_default_econtrol() (VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3)) diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S deleted file mode 100644 index c634c8d8f4a1..000000000000 --- a/include/asm-arm/arch-rpc/debug-macro.S +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-rpc/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x03000000 - movne \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000fe0 - .endm - -#define UART_SHIFT 2 -#define FLOW_CONTROL -#include diff --git a/include/asm-arm/arch-rpc/dma.h b/include/asm-arm/arch-rpc/dma.h deleted file mode 100644 index d24a27e30b93..000000000000 --- a/include/asm-arm/arch-rpc/dma.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/dma.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define MAX_DMA_ADDRESS 0xd0000000 -#define MAX_DMA_CHANNELS 8 - -#define DMA_0 0 -#define DMA_1 1 -#define DMA_2 2 -#define DMA_3 3 -#define DMA_S0 4 -#define DMA_S1 5 -#define DMA_VIRTUAL_FLOPPY 6 -#define DMA_VIRTUAL_SOUND 7 - -#define DMA_FLOPPY DMA_VIRTUAL_FLOPPY - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-rpc/entry-macro.S b/include/asm-arm/arch-rpc/entry-macro.S deleted file mode 100644 index 5bd55557ccca..000000000000 --- a/include/asm-arm/arch-rpc/entry-macro.S +++ /dev/null @@ -1,16 +0,0 @@ -#include -#include - - .equ ioc_base_high, IOC_BASE & 0xff000000 - .equ ioc_base_low, IOC_BASE & 0x00ff0000 - - .macro get_irqnr_preamble, base, tmp - mov \base, #ioc_base_high @ point at IOC - .if ioc_base_low - orr \base, \base, #ioc_base_low - .endif - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - diff --git a/include/asm-arm/arch-rpc/hardware.h b/include/asm-arm/arch-rpc/hardware.h deleted file mode 100644 index 7480f4e8d974..000000000000 --- a/include/asm-arm/arch-rpc/hardware.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/hardware.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains the hardware definitions of the RiscPC series machines. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include - -#ifndef __ASSEMBLY__ -#define IOMEM(x) ((void __iomem *)(unsigned long)(x)) -#else -#define IOMEM(x) x -#endif /* __ASSEMBLY__ */ - -/* - * What hardware must be present - */ -#define HAS_IOMD -#define HAS_VIDC20 - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_SIZE 0x10000000 -#define RAM_START 0x10000000 - -#define EASI_SIZE 0x08000000 /* EASI I/O */ -#define EASI_START 0x08000000 -#define EASI_BASE 0xe5000000 - -#define IO_START 0x03000000 /* I/O */ -#define IO_SIZE 0x01000000 -#define IO_BASE IOMEM(0xe0000000) - -#define SCREEN_START 0x02000000 /* VRAM */ -#define SCREEN_END 0xdfc00000 -#define SCREEN_BASE 0xdf800000 - -#define UNCACHEABLE_ADDR 0xdf010000 - -/* - * IO Addresses - */ -#define VIDC_BASE IOMEM(0xe0400000) -#define EXPMASK_BASE 0xe0360000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define PCIO_BASE IOMEM(0xe0010000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) - -#define vidc_writel(val) __raw_writel(val, VIDC_BASE) - -#define IO_EC_EASI_BASE 0x81400000 -#define IO_EC_IOC4_BASE 0x8009c000 -#define IO_EC_IOC_BASE 0x80090000 -#define IO_EC_MEMC8_BASE 0x8000ac00 -#define IO_EC_MEMC_BASE 0x80000000 - -#define NETSLOT_BASE 0x0302b000 -#define NETSLOT_SIZE 0x00001000 - -#define PODSLOT_IOC0_BASE 0x03240000 -#define PODSLOT_IOC4_BASE 0x03270000 -#define PODSLOT_IOC_SIZE (1 << 14) -#define PODSLOT_MEMC_BASE 0x03000000 -#define PODSLOT_MEMC_SIZE (1 << 14) -#define PODSLOT_EASI_BASE 0x08000000 -#define PODSLOT_EASI_SIZE (1 << 24) - -#define EXPMASK_STATUS (EXPMASK_BASE + 0x00) -#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04) - -#endif diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h deleted file mode 100644 index 0d10d4591a45..000000000000 --- a/include/asm-arm/arch-rpc/io.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 06-Dec-1997 RMK Created. - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * GCC is totally crap at loading/storing data. We try to persuade it - * to do the right thing by using these whereever possible instead of - * the above. - */ -#define __arch_base_getb(b,o) \ - ({ \ - unsigned int __v, __r = (b); \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2]" \ - : "=r" (__v) \ - : "r" (__r), "Ir" (o)); \ - __v; \ - }) - -#define __arch_base_getl(b,o) \ - ({ \ - unsigned int __v, __r = (b); \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2]" \ - : "=r" (__v) \ - : "r" (__r), "Ir" (o)); \ - __v; \ - }) - -#define __arch_base_putb(v,b,o) \ - ({ \ - unsigned int __r = (b); \ - __asm__ __volatile__( \ - "strb %0, [%1, %2]" \ - : \ - : "r" (v), "r" (__r), "Ir" (o));\ - }) - -#define __arch_base_putl(v,b,o) \ - ({ \ - unsigned int __r = (b); \ - __asm__ __volatile__( \ - "str %0, [%1, %2]" \ - : \ - : "r" (v), "r" (__r), "Ir" (o));\ - }) - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions. - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__deprecated __ioaddr(unsigned int port) -{ - void __iomem *ret; - if (__PORT_PCIO(port)) - ret = PCIO_BASE; - else - ret = IO_BASE; - return ret + (port << 2); -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __ioaddrc(port) __ioaddr(port) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) ((unsigned long)__ioaddr((port))) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-rpc/irqs.h b/include/asm-arm/arch-rpc/irqs.h deleted file mode 100644 index 27c35b05b27d..000000000000 --- a/include/asm-arm/arch-rpc/irqs.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/irqs.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define IRQ_PRINTER 0 -#define IRQ_BATLOW 1 -#define IRQ_FLOPPYINDEX 2 -#define IRQ_VSYNCPULSE 3 -#define IRQ_POWERON 4 -#define IRQ_TIMER0 5 -#define IRQ_TIMER1 6 -#define IRQ_IMMEDIATE 7 -#define IRQ_EXPCARDFIQ 8 -#define IRQ_HARDDISK 9 -#define IRQ_SERIALPORT 10 -#define IRQ_FLOPPYDISK 12 -#define IRQ_EXPANSIONCARD 13 -#define IRQ_KEYBOARDTX 14 -#define IRQ_KEYBOARDRX 15 - -#define IRQ_DMA0 16 -#define IRQ_DMA1 17 -#define IRQ_DMA2 18 -#define IRQ_DMA3 19 -#define IRQ_DMAS0 20 -#define IRQ_DMAS1 21 - -#define FIQ_FLOPPYDATA 0 -#define FIQ_ECONET 2 -#define FIQ_SERIALPORT 4 -#define FIQ_EXPANSIONCARD 6 -#define FIQ_FORCE 7 - -/* - * This is the offset of the FIQ "IRQ" numbers - */ -#define FIQ_START 64 - -#define IRQ_TIMER IRQ_TIMER0 - diff --git a/include/asm-arm/arch-rpc/memory.h b/include/asm-arm/arch-rpc/memory.h deleted file mode 100644 index 303c424ce673..000000000000 --- a/include/asm-arm/arch-rpc/memory.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 20-Oct-1996 RMK Created - * 31-Dec-1997 RMK Fixed definitions to reduce warnings - * 11-Jan-1998 RMK Uninlined to reduce hits on cache - * 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt - * 21-Mar-1999 RMK Renamed to memory.h - * RMK Added TASK_SIZE and PAGE_OFFSET - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x10000000) - -/* - * These are exactly the same on the RiscPC as the - * physical memory view. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - ROM - */ -#define FLUSH_BASE_PHYS 0x00000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h deleted file mode 100644 index ca3277d1d5ea..000000000000 --- a/include/asm-arm/arch-rpc/system.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/system.h - * - * Copyright (C) 1996-1999 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - iomd_writeb(0, IOMD_ROMCR0); - - /* - * Jump into the ROM - */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-rpc/timex.h b/include/asm-arm/arch-rpc/timex.h deleted file mode 100644 index ed7df64d960b..000000000000 --- a/include/asm-arm/arch-rpc/timex.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/timex.h - * - * Copyright (C) 1997, 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * RiscPC architecture timex specifications - */ - -/* - * On the RiscPC, the clock ticks at 2MHz. - */ -#define CLOCK_TICK_RATE 2000000 - diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h deleted file mode 100644 index 844e4d469fb2..000000000000 --- a/include/asm-arm/arch-rpc/uncompress.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/uncompress.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VIDMEM ((char *)SCREEN_START) - -#include -#include -#include -#include - -int video_size_row; -unsigned char bytes_per_char_h; -extern unsigned long con_charconvtable[256]; - -struct param_struct { - unsigned long page_size; - unsigned long nr_pages; - unsigned long ramdisk_size; - unsigned long mountrootrdonly; - unsigned long rootdev; - unsigned long video_num_cols; - unsigned long video_num_rows; - unsigned long video_x; - unsigned long video_y; - unsigned long memc_control_reg; - unsigned char sounddefault; - unsigned char adfsdrives; - unsigned char bytes_per_char_h; - unsigned char bytes_per_char_v; - unsigned long unused[256/4-11]; -}; - -static const unsigned long palette_4[16] = { - 0x00000000, - 0x000000cc, - 0x0000cc00, /* Green */ - 0x0000cccc, /* Yellow */ - 0x00cc0000, /* Blue */ - 0x00cc00cc, /* Magenta */ - 0x00cccc00, /* Cyan */ - 0x00cccccc, /* White */ - 0x00000000, - 0x000000ff, - 0x0000ff00, - 0x0000ffff, - 0x00ff0000, - 0x00ff00ff, - 0x00ffff00, - 0x00ffffff -}; - -#define palette_setpixel(p) *(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255) -#define palette_write(v) *(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff) - -/* - * params_phys is a linker defined symbol - see - * arch/arm/boot/compressed/Makefile - */ -extern __attribute__((pure)) struct param_struct *params(void); -#define params (params()) - -#ifndef STANDALONE_DEBUG -static unsigned long video_num_cols; -static unsigned long video_num_rows; -static unsigned long video_x; -static unsigned long video_y; -static unsigned char bytes_per_char_v; -static int white; - -/* - * This does not append a newline - */ -static void putc(int c) -{ - extern void ll_write_char(char *, char c, char white); - int x,y; - char *ptr; - - x = video_x; - y = video_y; - - if (c == '\n') { - if (++y >= video_num_rows) - y--; - } else if (c == '\r') { - x = 0; - } else { - ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h); - ll_write_char(ptr, c, white); - if (++x >= video_num_cols) { - x = 0; - if ( ++y >= video_num_rows ) { - y--; - } - } - } - - video_x = x; - video_y = y; -} - -static inline void flush(void) -{ -} - -static void error(char *x); - -/* - * Setup for decompression - */ -static void arch_decomp_setup(void) -{ - int i; - struct tag *t = (struct tag *)params; - unsigned int nr_pages = 0, page_size = PAGE_SIZE; - - if (t->hdr.tag == ATAG_CORE) - { - for (; t->hdr.size; t = tag_next(t)) - { - if (t->hdr.tag == ATAG_VIDEOTEXT) - { - video_num_rows = t->u.videotext.video_lines; - video_num_cols = t->u.videotext.video_cols; - bytes_per_char_h = t->u.videotext.video_points; - bytes_per_char_v = t->u.videotext.video_points; - video_x = t->u.videotext.x; - video_y = t->u.videotext.y; - } - - if (t->hdr.tag == ATAG_MEM) - { - page_size = PAGE_SIZE; - nr_pages += (t->u.mem.size / PAGE_SIZE); - } - } - } - else - { - nr_pages = params->nr_pages; - page_size = params->page_size; - video_num_rows = params->video_num_rows; - video_num_cols = params->video_num_cols; - video_x = params->video_x; - video_y = params->video_y; - bytes_per_char_h = params->bytes_per_char_h; - bytes_per_char_v = params->bytes_per_char_v; - } - - video_size_row = video_num_cols * bytes_per_char_h; - - if (bytes_per_char_h == 4) - for (i = 0; i < 256; i++) - con_charconvtable[i] = - (i & 128 ? 1 << 0 : 0) | - (i & 64 ? 1 << 4 : 0) | - (i & 32 ? 1 << 8 : 0) | - (i & 16 ? 1 << 12 : 0) | - (i & 8 ? 1 << 16 : 0) | - (i & 4 ? 1 << 20 : 0) | - (i & 2 ? 1 << 24 : 0) | - (i & 1 ? 1 << 28 : 0); - else - for (i = 0; i < 16; i++) - con_charconvtable[i] = - (i & 8 ? 1 << 0 : 0) | - (i & 4 ? 1 << 8 : 0) | - (i & 2 ? 1 << 16 : 0) | - (i & 1 ? 1 << 24 : 0); - - - palette_setpixel(0); - if (bytes_per_char_h == 1) { - palette_write (0); - palette_write (0x00ffffff); - for (i = 2; i < 256; i++) - palette_write (0); - white = 1; - } else { - for (i = 0; i < 256; i++) - palette_write (i < 16 ? palette_4[i] : 0); - white = 7; - } - - if (nr_pages * page_size < 4096*1024) error("<4M of mem\n"); -} -#endif - -/* - * nothing to do - */ -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-rpc/vmalloc.h b/include/asm-arm/arch-rpc/vmalloc.h deleted file mode 100644 index 077046bb2f36..000000000000 --- a/include/asm-arm/arch-rpc/vmalloc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * linux/include/asm-arm/arch-rpc/vmalloc.h - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define VMALLOC_END (PAGE_OFFSET + 0x1c000000) diff --git a/include/asm-arm/arch-s3c2400/map.h b/include/asm-arm/arch-s3c2400/map.h deleted file mode 100644 index 1184d907b31e..000000000000 --- a/include/asm-arm/arch-s3c2400/map.h +++ /dev/null @@ -1,66 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2400/map.h - * - * Copyright 2003,2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * Copyright 2003, Lucas Correia Villa Real - * - * S3C2400 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C2400_PA_MEMCTRL (0x14000000) -#define S3C2400_PA_USBHOST (0x14200000) -#define S3C2400_PA_IRQ (0x14400000) -#define S3C2400_PA_DMA (0x14600000) -#define S3C2400_PA_CLKPWR (0x14800000) -#define S3C2400_PA_LCD (0x14A00000) -#define S3C2400_PA_UART (0x15000000) -#define S3C2400_PA_TIMER (0x15100000) -#define S3C2400_PA_USBDEV (0x15200140) -#define S3C2400_PA_WATCHDOG (0x15300000) -#define S3C2400_PA_IIC (0x15400000) -#define S3C2400_PA_IIS (0x15508000) -#define S3C2400_PA_GPIO (0x15600000) -#define S3C2400_PA_RTC (0x15700040) -#define S3C2400_PA_ADC (0x15800000) -#define S3C2400_PA_SPI (0x15900000) - -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - -/* physical addresses of all the chip-select areas */ - -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/include/asm-arm/arch-s3c2400/memory.h b/include/asm-arm/arch-s3c2400/memory.h deleted file mode 100644 index fb0381dde704..000000000000 --- a/include/asm-arm/arch-s3c2400/memory.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2400/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x0C000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/anubis-cpld.h b/include/asm-arm/arch-s3c2410/anubis-cpld.h deleted file mode 100644 index 168b93fee529..000000000000 --- a/include/asm-arm/arch-s3c2410/anubis-cpld.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-cpld.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISCPLD_H -#define __ASM_ARCH_ANUBISCPLD_H - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define ANUBIS_CTRL1_NANDSEL (0x3) - -/* IDREG - revision */ - -#define ANUBIS_IDREG_REVMASK (0x7) - -#endif /* __ASM_ARCH_ANUBISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-irq.h b/include/asm-arm/arch-s3c2410/anubis-irq.h deleted file mode 100644 index cd77a70d45c0..000000000000 --- a/include/asm-arm/arch-s3c2410/anubis-irq.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-irq.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_ANUBISIRQ_H -#define __ASM_ARCH_ANUBISIRQ_H - -#define IRQ_IDE0 IRQ_EINT2 -#define IRQ_IDE1 IRQ_EINT3 -#define IRQ_ASIX IRQ_EINT1 - -#endif /* __ASM_ARCH_ANUBISIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/anubis-map.h b/include/asm-arm/arch-s3c2410/anubis-map.h deleted file mode 100644 index 830d114261da..000000000000 --- a/include/asm-arm/arch-s3c2410/anubis-map.h +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/anubis-map.h - * - * Copyright (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * ANUBIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_ANUBISMAP_H -#define __ASM_ARCH_ANUBISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define ANUBIS_IOADDR(x) (S3C2410_ADDR((x) + 0x01800000)) - -#define ANUBIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define ANUBIS_VA_CTRL1 ANUBIS_IOADDR(0x00000000) /* 0x01800000 */ -#define ANUBIS_PA_CTRL1 (ANUBIS_PA_CPLD) - -#define ANUBIS_VA_IDREG ANUBIS_IOADDR(0x00300000) /* 0x01B00000 */ -#define ANUBIS_PA_IDREG (ANUBIS_PA_CPLD + (3<<23)) - -#define ANUBIS_IDEPRI ANUBIS_IOADDR(0x01000000) -#define ANUBIS_IDEPRIAUX ANUBIS_IOADDR(0x01100000) -#define ANUBIS_IDESEC ANUBIS_IOADDR(0x01200000) -#define ANUBIS_IDESECAUX ANUBIS_IOADDR(0x01300000) - -#endif /* __ASM_ARCH_ANUBISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/audio.h b/include/asm-arm/arch-s3c2410/audio.h deleted file mode 100644 index 0a6977fb5770..000000000000 --- a/include/asm-arm/arch-s3c2410/audio.h +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/audio.h - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * Ben Dooks - * - * S3C24XX - Audio platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_AUDIO_H -#define __ASM_ARCH_AUDIO_H __FILE__ - -/* struct s3c24xx_iis_ops - * - * called from the s3c24xx audio core to deal with the architecture - * or the codec's setup and control. - * - * the pointer to itself is passed through in case the caller wants to - * embed this in an larger structure for easy reference to it's context. -*/ - -struct s3c24xx_iis_ops { - struct module *owner; - - int (*startup)(struct s3c24xx_iis_ops *me); - void (*shutdown)(struct s3c24xx_iis_ops *me); - int (*suspend)(struct s3c24xx_iis_ops *me); - int (*resume)(struct s3c24xx_iis_ops *me); - - int (*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm); - int (*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt); -}; - -struct s3c24xx_platdata_iis { - const char *codec_clk; - struct s3c24xx_iis_ops *ops; - int (*match_dev)(struct device *dev); -}; - -#endif /* __ASM_ARCH_AUDIO_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-cpld.h b/include/asm-arm/arch-s3c2410/bast-cpld.h deleted file mode 100644 index 034d2c5a47c4..000000000000 --- a/include/asm-arm/arch-s3c2410/bast-cpld.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-cpld.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * BAST - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTCPLD_H -#define __ASM_ARCH_BASTCPLD_H - -/* CTRL1 - Audio LR routing */ - -#define BAST_CPLD_CTRL1_LRCOFF (0x00) -#define BAST_CPLD_CTRL1_LRCADC (0x01) -#define BAST_CPLD_CTRL1_LRCDAC (0x02) -#define BAST_CPLD_CTRL1_LRCARM (0x03) -#define BAST_CPLD_CTRL1_LRMASK (0x03) - -/* CTRL2 - NAND WP control, IDE Reset assert/check */ - -#define BAST_CPLD_CTRL2_WNAND (0x04) -#define BAST_CPLD_CTLR2_IDERST (0x08) - -/* CTRL3 - rom write control, CPLD identity */ - -#define BAST_CPLD_CTRL3_IDMASK (0x0e) -#define BAST_CPLD_CTRL3_ROMWEN (0x01) - -/* CTRL4 - 8bit LCD interface control/status */ - -#define BAST_CPLD_CTRL4_LLAT (0x01) -#define BAST_CPLD_CTRL4_LCDRW (0x02) -#define BAST_CPLD_CTRL4_LCDCMD (0x04) -#define BAST_CPLD_CTRL4_LCDE2 (0x01) - -/* CTRL5 - DMA routing */ - -#define BAST_CPLD_DMA0_PRIIDE (0<<0) -#define BAST_CPLD_DMA0_SECIDE (1<<0) -#define BAST_CPLD_DMA0_ISA15 (2<<0) -#define BAST_CPLD_DMA0_ISA36 (3<<0) - -#define BAST_CPLD_DMA1_PRIIDE (0<<2) -#define BAST_CPLD_DMA1_SECIDE (1<<2) -#define BAST_CPLD_DMA1_ISA15 (2<<2) -#define BAST_CPLD_DMA1_ISA36 (3<<2) - -#endif /* __ASM_ARCH_BASTCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-irq.h b/include/asm-arm/arch-s3c2410/bast-irq.h deleted file mode 100644 index 726c0466f85a..000000000000 --- a/include/asm-arm/arch-s3c2410/bast-irq.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-irq.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTIRQ_H -#define __ASM_ARCH_BASTIRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT18 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_PCSERIAL1 IRQ_EINT15 -#define IRQ_PCSERIAL2 IRQ_EINT14 -#define IRQ_PCPARALLEL IRQ_EINT13 -#define IRQ_ASIX IRQ_EINT11 -#define IRQ_DM9000 IRQ_EINT10 -#define IRQ_ISA IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_BASTIRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-map.h b/include/asm-arm/arch-s3c2410/bast-map.h deleted file mode 100644 index 86ac1c108db8..000000000000 --- a/include/asm-arm/arch-s3c2410/bast-map.h +++ /dev/null @@ -1,146 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-map.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine BAST - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_BASTMAP_H -#define __ASM_ARCH_BASTMAP_H - -#define BAST_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define BAST_VA_CTRL1 BAST_IOADDR(0x00000000) /* 0x01300000 */ -#define BAST_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define BAST_VA_CTRL2 BAST_IOADDR(0x00100000) /* 0x01400000 */ -#define BAST_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define BAST_VA_CTRL3 BAST_IOADDR(0x00200000) /* 0x01500000 */ -#define BAST_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define BAST_VA_CTRL4 BAST_IOADDR(0x00300000) /* 0x01600000 */ -#define BAST_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define BAST_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define BAST_VA_PC104_IRQREQ BAST_IOADDR(0x00400000) - -#define BAST_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define BAST_VA_PC104_IRQRAW BAST_IOADDR(0x00500000) - -#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000) - -#define BAST_PA_LCD_RCMD1 (0x8800000) -#define BAST_VA_LCD_RCMD1 BAST_IOADDR(0x00700000) - -#define BAST_PA_LCD_WCMD1 (0x8000000) -#define BAST_VA_LCD_WCMD1 BAST_IOADDR(0x00800000) - -#define BAST_PA_LCD_RDATA1 (0x9800000) -#define BAST_VA_LCD_RDATA1 BAST_IOADDR(0x00900000) - -#define BAST_PA_LCD_WDATA1 (0x9000000) -#define BAST_VA_LCD_WDATA1 BAST_IOADDR(0x00A00000) - -#define BAST_PA_LCD_RCMD2 (0xA800000) -#define BAST_VA_LCD_RCMD2 BAST_IOADDR(0x00B00000) - -#define BAST_PA_LCD_WCMD2 (0xA000000) -#define BAST_VA_LCD_WCMD2 BAST_IOADDR(0x00C00000) - -#define BAST_PA_LCD_RDATA2 (0xB800000) -#define BAST_VA_LCD_RDATA2 BAST_IOADDR(0x00D00000) - -#define BAST_PA_LCD_WDATA2 (0xB000000) -#define BAST_VA_LCD_WDATA2 BAST_IOADDR(0x00E00000) - - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x00000000 to 0x01000000 16MB ISA IO space - * 0x01000000 to 0x02000000 16MB ISA memory space - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02400000 to 0x02500000 1MB ASIX ethernet controller - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controller - * 0x02600000 to 0x02700000 1MB PC SuperIO controller - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VA_ISAIO (BAST_VA_MULTISPACE + 0x00000000) -#define BAST_VA_ISAMEM (BAST_VA_MULTISPACE + 0x01000000) -#define BAST_VA_IDEPRI (BAST_VA_MULTISPACE + 0x02000000) -#define BAST_VA_IDEPRIAUX (BAST_VA_MULTISPACE + 0x02100000) -#define BAST_VA_IDESEC (BAST_VA_MULTISPACE + 0x02200000) -#define BAST_VA_IDESECAUX (BAST_VA_MULTISPACE + 0x02300000) -#define BAST_VA_ASIXNET (BAST_VA_MULTISPACE + 0x02400000) -#define BAST_VA_DM9000 (BAST_VA_MULTISPACE + 0x02500000) -#define BAST_VA_SUPERIO (BAST_VA_MULTISPACE + 0x02600000) - -#define BAST_VA_MULTISPACE (0xE0000000) - -#define BAST_VAM_CS2 (0x00000000) -#define BAST_VAM_CS3 (0x04000000) -#define BAST_VAM_CS4 (0x08000000) -#define BAST_VAM_CS5 (0x0C000000) - -/* physical offset addresses for the peripherals */ - -#define BAST_PA_ISAIO (0x00000000) -#define BAST_PA_ASIXNET (0x01000000) -#define BAST_PA_SUPERIO (0x01800000) -#define BAST_PA_IDEPRI (0x02000000) -#define BAST_PA_IDEPRIAUX (0x02800000) -#define BAST_PA_IDESEC (0x03000000) -#define BAST_PA_IDESECAUX (0x03800000) -#define BAST_PA_ISAMEM (0x04000000) -#define BAST_PA_DM9000 (0x05000000) - -/* some configurations for the peripherals */ - -#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2) -/* */ - -#define BAST_ASIXNET_CS BAST_VAM_CS5 -#define BAST_IDE_CS BAST_VAM_CS5 -#define BAST_DM9000_CS BAST_VAM_CS4 - -#endif /* __ASM_ARCH_BASTMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/bast-pmu.h b/include/asm-arm/arch-s3c2410/bast-pmu.h deleted file mode 100644 index 37a11fe54a78..000000000000 --- a/include/asm-arm/arch-s3c2410/bast-pmu.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/bast-pmu.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * Vincent Sanders - * - * Machine BAST - Power Management chip - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_BASTPMU_H -#define __ASM_ARCH_BASTPMU_H "08_OCT_2004" - -#define BASTPMU_REG_IDENT (0x00) -#define BASTPMU_REG_VERSION (0x01) -#define BASTPMU_REG_DDCCTRL (0x02) -#define BASTPMU_REG_POWER (0x03) -#define BASTPMU_REG_RESET (0x04) -#define BASTPMU_REG_GWO (0x05) -#define BASTPMU_REG_WOL (0x06) -#define BASTPMU_REG_WOR (0x07) -#define BASTPMU_REG_UID (0x09) - -#define BASTPMU_EEPROM (0xC0) - -#define BASTPMU_EEP_UID (BASTPMU_EEPROM + 0) -#define BASTPMU_EEP_WOL (BASTPMU_EEPROM + 8) -#define BASTPMU_EEP_WOR (BASTPMU_EEPROM + 9) - -#define BASTPMU_IDENT_0 0x53 -#define BASTPMU_IDENT_1 0x42 -#define BASTPMU_IDENT_2 0x50 -#define BASTPMU_IDENT_3 0x4d - -#define BASTPMU_RESET_GUARD (0x55) - -#endif /* __ASM_ARCH_BASTPMU_H */ diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S deleted file mode 100644 index 89076c322726..000000000000 --- a/include/asm-arm/arch-s3c2410/debug-macro.S +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h deleted file mode 100644 index 86eaa0c2dc1e..000000000000 --- a/include/asm-arm/arch-s3c2410/dma.h +++ /dev/null @@ -1,453 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/dma.h - * - * Copyright (C) 2003,2004,2006 Simtec Electronics - * Ben Dooks - * - * Samsung S3C241XX DMA support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#include -#include - -/* - * This is the maximum DMA address(physical address) that can be DMAd to. - * - */ -#define MAX_DMA_ADDRESS 0x40000000 -#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ - -/* We use `virtual` dma channels to hide the fact we have only a limited - * number of DMA channels, and not of all of them (dependant on the device) - * can be attached to any DMA source. We therefore let the DMA core handle - * the allocation of hardware channels to clients. -*/ - -enum dma_ch { - DMACH_XD0, - DMACH_XD1, - DMACH_SDI, - DMACH_SPI0, - DMACH_SPI1, - DMACH_UART0, - DMACH_UART1, - DMACH_UART2, - DMACH_TIMER, - DMACH_I2S_IN, - DMACH_I2S_OUT, - DMACH_PCM_IN, - DMACH_PCM_OUT, - DMACH_MIC_IN, - DMACH_USB_EP1, - DMACH_USB_EP2, - DMACH_USB_EP3, - DMACH_USB_EP4, - DMACH_UART0_SRC2, /* s3c2412 second uart sources */ - DMACH_UART1_SRC2, - DMACH_UART2_SRC2, - DMACH_UART3, /* s3c2443 has extra uart */ - DMACH_UART3_SRC2, - DMACH_MAX, /* the end entry */ -}; - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -/* we have 4 dma channels */ -#ifndef CONFIG_CPU_S3C2443 -#define S3C2410_DMA_CHANNELS (4) -#else -#define S3C2410_DMA_CHANNELS (6) -#endif - -/* types */ - -enum s3c2410_dma_state { - S3C2410_DMA_IDLE, - S3C2410_DMA_RUNNING, - S3C2410_DMA_PAUSED -}; - - -/* enum s3c2410_dma_loadst - * - * This represents the state of the DMA engine, wrt to the loaded / running - * transfers. Since we don't have any way of knowing exactly the state of - * the DMA transfers, we need to know the state to make decisions on wether - * we can - * - * S3C2410_DMA_NONE - * - * There are no buffers loaded (the channel should be inactive) - * - * S3C2410_DMA_1LOADED - * - * There is one buffer loaded, however it has not been confirmed to be - * loaded by the DMA engine. This may be because the channel is not - * yet running, or the DMA driver decided that it was too costly to - * sit and wait for it to happen. - * - * S3C2410_DMA_1RUNNING - * - * The buffer has been confirmed running, and not finisged - * - * S3C2410_DMA_1LOADED_1RUNNING - * - * There is a buffer waiting to be loaded by the DMA engine, and one - * currently running. -*/ - -enum s3c2410_dma_loadst { - S3C2410_DMALOAD_NONE, - S3C2410_DMALOAD_1LOADED, - S3C2410_DMALOAD_1RUNNING, - S3C2410_DMALOAD_1LOADED_1RUNNING, -}; - -enum s3c2410_dma_buffresult { - S3C2410_RES_OK, - S3C2410_RES_ERR, - S3C2410_RES_ABORT -}; - -enum s3c2410_dmasrc { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ -}; - -/* enum s3c2410_chan_op - * - * operation codes passed to the DMA code by the user, and also used - * to inform the current channel owner of any changes to the system state -*/ - -enum s3c2410_chan_op { - S3C2410_DMAOP_START, - S3C2410_DMAOP_STOP, - S3C2410_DMAOP_PAUSE, - S3C2410_DMAOP_RESUME, - S3C2410_DMAOP_FLUSH, - S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ - S3C2410_DMAOP_STARTED, /* indicate channel started */ -}; - -/* flags */ - -#define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about - * waiting for reloads */ -#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ - -/* dma buffer */ - -struct s3c2410_dma_client { - char *name; -}; - -/* s3c2410_dma_buf_s - * - * internally used buffer structure to describe a queued or running - * buffer. -*/ - -struct s3c2410_dma_buf; -struct s3c2410_dma_buf { - struct s3c2410_dma_buf *next; - int magic; /* magic */ - int size; /* buffer size in bytes */ - dma_addr_t data; /* start of DMA data */ - dma_addr_t ptr; /* where the DMA got to [1] */ - void *id; /* client's id */ -}; - -/* [1] is this updated for both recv/send modes? */ - -struct s3c2410_dma_chan; - -/* s3c2410_dma_cbfn_t - * - * buffer callback routine type -*/ - -typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, - void *buf, int size, - enum s3c2410_dma_buffresult result); - -typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, - enum s3c2410_chan_op ); - -struct s3c2410_dma_stats { - unsigned long loads; - unsigned long timeout_longest; - unsigned long timeout_shortest; - unsigned long timeout_avg; - unsigned long timeout_failed; -}; - -struct s3c2410_dma_map; - -/* struct s3c2410_dma_chan - * - * full state information for each DMA channel -*/ - -struct s3c2410_dma_chan { - /* channel state flags and information */ - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char irq_claimed; /* irq claimed for channel */ - unsigned char irq_enabled; /* irq enabled for channel */ - unsigned char xfer_unit; /* size of an transfer */ - - /* channel state */ - - enum s3c2410_dma_state state; - enum s3c2410_dma_loadst load_state; - struct s3c2410_dma_client *client; - - /* channel configuration */ - enum s3c2410_dmasrc source; - unsigned long dev_addr; - unsigned long load_timeout; - unsigned int flags; /* channel flags */ - unsigned int hw_cfg; /* last hw config */ - - struct s3c24xx_dma_map *map; /* channel hw maps */ - - /* channel's hardware position and configuration */ - void __iomem *regs; /* channels registers */ - void __iomem *addr_reg; /* data address register */ - unsigned int irq; /* channel irq */ - unsigned long dcon; /* default value of DCON */ - - /* driver handles */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* stats gathering */ - struct s3c2410_dma_stats *stats; - struct s3c2410_dma_stats stats_store; - - /* buffer list and information */ - struct s3c2410_dma_buf *curr; /* current dma buffer */ - struct s3c2410_dma_buf *next; /* next buffer to load */ - struct s3c2410_dma_buf *end; /* end of queue */ - - /* system device */ - struct sys_device dev; -}; - -/* the currently allocated channel information */ -extern struct s3c2410_dma_chan s3c2410_chans[]; - -/* note, we don't really use dma_device_t at the moment */ -typedef unsigned long dma_device_t; - -/* functions --------------------------------------------------------------- */ - -/* s3c2410_dma_request - * - * request a dma channel exclusivley -*/ - -extern int s3c2410_dma_request(dmach_t channel, - struct s3c2410_dma_client *, void *dev); - - -/* s3c2410_dma_ctrl - * - * change the state of the dma channel -*/ - -extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op); - -/* s3c2410_dma_setflags - * - * set the channel's flags to a given state -*/ - -extern int s3c2410_dma_setflags(dmach_t channel, - unsigned int flags); - -/* s3c2410_dma_free - * - * free the dma channel (will also abort any outstanding operations) -*/ - -extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *); - -/* s3c2410_dma_enqueue - * - * place the given buffer onto the queue of operations for the channel. - * The buffer must be allocated from dma coherent memory, or the Dcache/WB - * drained before the buffer is given to the DMA system. -*/ - -extern int s3c2410_dma_enqueue(dmach_t channel, void *id, - dma_addr_t data, int size); - -/* s3c2410_dma_config - * - * configure the dma channel -*/ - -extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon); - -/* s3c2410_dma_devconfig - * - * configure the device we're talking to -*/ - -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - int hwcfg, unsigned long devaddr); - -/* s3c2410_dma_getposition - * - * get the position that the dma transfer is currently at -*/ - -extern int s3c2410_dma_getposition(dmach_t channel, - dma_addr_t *src, dma_addr_t *dest); - -extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn); - -/* DMA Register definitions */ - -#define S3C2410_DMA_DISRC (0x00) -#define S3C2410_DMA_DISRCC (0x04) -#define S3C2410_DMA_DIDST (0x08) -#define S3C2410_DMA_DIDSTC (0x0C) -#define S3C2410_DMA_DCON (0x10) -#define S3C2410_DMA_DSTAT (0x14) -#define S3C2410_DMA_DCSRC (0x18) -#define S3C2410_DMA_DCDST (0x1C) -#define S3C2410_DMA_DMASKTRIG (0x20) -#define S3C2412_DMA_DMAREQSEL (0x24) -#define S3C2443_DMA_DMAREQSEL (0x24) - -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) - -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) - -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) - -#define S3C2410_DCON_INTREQ (1<<29) - -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) - -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) - -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) - -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) - -#define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) - -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) - -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) - -#ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) - -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) - -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) - -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) - -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif - -#ifdef CONFIG_CPU_S3C2412 - -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2412_DMAREQSEL_HW (1) - -#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0) -#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1) -#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2) -#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3) -#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4) -#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5) -#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9) -#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10) -#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13) -#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14) -#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15) -#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16) -#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17) -#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18) -#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19) -#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20) -#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21) -#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) -#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) -#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) - -#endif - -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) - -#define S3C2443_DMAREQSEL_HW (1) - -#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0) -#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1) -#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2) -#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3) -#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4) -#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5) -#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9) -#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10) -#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17) -#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18) -#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19) -#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20) -#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21) -#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22) -#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23) -#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24) -#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) -#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) -#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) -#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) - -#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-s3c2410/entry-macro.S b/include/asm-arm/arch-s3c2410/entry-macro.S deleted file mode 100644 index f70d051b267b..000000000000 --- a/include/asm-arm/arch-s3c2410/entry-macro.S +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-arm/arch-s3c2410/entry-macro.S - * - * Low-level IRQ helper macros for S3C2410-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -/* We have a problem that the INTOFFSET register does not always - * show one interrupt. Occasionally we get two interrupts through - * the prioritiser, and this causes the INTOFFSET register to show - * what looks like the logical-or of the two interrupt numbers. - * - * Thanks to Klaus, Shannon, et al for helping to debug this problem -*/ - -#define INTPND (0x10) -#define INTOFFSET (0x14) - -#include -#include - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - mov \base, #S3C24XX_VA_IRQ - - @@ try the interrupt offset register, since it is there - - ldr \irqstat, [ \base, #INTPND ] - teq \irqstat, #0 - beq 1002f - ldr \irqnr, [ \base, #INTOFFSET ] - mov \tmp, #1 - tst \irqstat, \tmp, lsl \irqnr - bne 1001f - - @@ the number specified is not a valid irq, so try - @@ and work it out for ourselves - - mov \irqnr, #0 @@ start here - - @@ work out which irq (if any) we got - - movs \tmp, \irqstat, lsl#16 - addeq \irqnr, \irqnr, #16 - moveq \irqstat, \irqstat, lsr#16 - tst \irqstat, #0xff - addeq \irqnr, \irqnr, #8 - moveq \irqstat, \irqstat, lsr#8 - tst \irqstat, #0xf - addeq \irqnr, \irqnr, #4 - moveq \irqstat, \irqstat, lsr#4 - tst \irqstat, #0x3 - addeq \irqnr, \irqnr, #2 - moveq \irqstat, \irqstat, lsr#2 - tst \irqstat, #0x1 - addeq \irqnr, \irqnr, #1 - - @@ we have the value -1001: - adds \irqnr, \irqnr, #IRQ_EINT0 -1002: - @@ exit here, Z flag unset if IRQ - - .endm - - /* currently don't need an disable_fiq macro */ - - .macro disable_fiq - .endm diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h deleted file mode 100644 index 5d0262601a7e..000000000000 --- a/include/asm-arm/arch-s3c2410/fb.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/fb.h - * - * Copyright (c) 2004 Arnaud Patard - * - * Inspired by pxafb.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_FB_H -#define __ASM_ARM_FB_H - -#include - -struct s3c2410fb_hw { - unsigned long lcdcon1; - unsigned long lcdcon2; - unsigned long lcdcon3; - unsigned long lcdcon4; - unsigned long lcdcon5; -}; - -/* LCD description */ -struct s3c2410fb_display { - /* LCD type */ - unsigned type; - - /* Screen size */ - unsigned short width; - unsigned short height; - - /* Screen info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned pixclock; /* pixclock in picoseconds */ - unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ - - /* lcd configuration registers */ - unsigned long lcdcon5; -}; - -struct s3c2410fb_mach_info { - - struct s3c2410fb_display *displays; /* attached diplays info */ - unsigned num_displays; /* number of defined displays */ - unsigned default_display; - - /* GPIOs */ - - unsigned long gpcup; - unsigned long gpcup_mask; - unsigned long gpccon; - unsigned long gpccon_mask; - unsigned long gpdup; - unsigned long gpdup_mask; - unsigned long gpdcon; - unsigned long gpdcon_mask; - - /* lpc3600 control register */ - unsigned long lpcsel; -}; - -extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); - -#endif /* __ASM_ARM_FB_H */ diff --git a/include/asm-arm/arch-s3c2410/gpio.h b/include/asm-arm/arch-s3c2410/gpio.h deleted file mode 100644 index 18e10d2c35ea..000000000000 --- a/include/asm-arm/arch-s3c2410/gpio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/gpio.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep - -#include diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h deleted file mode 100644 index c3de5ab102eb..000000000000 --- a/include/asm-arm/arch-s3c2410/h1940-latch.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h - * - * Copyright (c) 2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * iPAQ H1940 series - latch definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_LATCH_H -#define __ASM_ARCH_H1940_LATCH_H - - -#ifndef __ASSEMBLY__ -#define H1940_LATCH ((void __force __iomem *)0xF8000000) -#else -#define H1940_LATCH 0xF8000000 -#endif - -#define H1940_PA_LATCH (S3C2410_CS2) - -/* SD layer latch */ - -#define H1940_LATCH_SDQ1 (1<<16) -#define H1940_LATCH_LCD_P1 (1<<17) -#define H1940_LATCH_LCD_P2 (1<<18) -#define H1940_LATCH_LCD_P3 (1<<19) -#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */ -#define H1940_LATCH_LED_RED (1<<21) -#define H1940_LATCH_SDQ7 (1<<22) -#define H1940_LATCH_USB_DP (1<<23) - -/* CPU layer latch */ - -#define H1940_LATCH_UDA_POWER (1<<24) -#define H1940_LATCH_AUDIO_POWER (1<<25) -#define H1940_LATCH_SM803_ENABLE (1<<26) -#define H1940_LATCH_LCD_P4 (1<<27) -#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */ -#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */ -#define H1940_LATCH_LED_GREEN (1<<30) -#define H1940_LATCH_LED_FLASH (1<<31) - -/* default settings */ - -#define H1940_LATCH_DEFAULT \ - H1940_LATCH_LCD_P4 | \ - H1940_LATCH_SM803_ENABLE | \ - H1940_LATCH_SDQ1 | \ - H1940_LATCH_LCD_P1 | \ - H1940_LATCH_LCD_P2 | \ - H1940_LATCH_LCD_P3 | \ - H1940_LATCH_MAX1698_nSHUTDOWN | \ - H1940_LATCH_CPUQ5 - -/* control functions */ - -extern void h1940_latch_control(unsigned int clear, unsigned int set); - -#endif /* __ASM_ARCH_H1940_LATCH_H */ diff --git a/include/asm-arm/arch-s3c2410/h1940.h b/include/asm-arm/arch-s3c2410/h1940.h deleted file mode 100644 index 6135592e60f2..000000000000 --- a/include/asm-arm/arch-s3c2410/h1940.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/h1940.h - * - * Copyright 2006 Ben Dooks - * - * H1940 definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_H1940_H -#define __ASM_ARCH_H1940_H - -#define H1940_SUSPEND_CHECKSUM (0x30003ff8) -#define H1940_SUSPEND_RESUMEAT (0x30081000) -#define H1940_SUSPEND_CHECK (0x30080000) - -extern void h1940_pm_return(void); - -#endif /* __ASM_ARCH_H1940_H */ diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h deleted file mode 100644 index 6dd10be43145..000000000000 --- a/include/asm-arm/arch-s3c2410/hardware.h +++ /dev/null @@ -1,137 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/hardware.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irq2pin - * - * turn the given irq number into the corresponding GPIO number - * - * returns: - * < 0 = no pin - * >=0 = gpio pin number -*/ - -extern int s3c2410_gpio_irq2pin(unsigned int irq); - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB0, 0); - * s3c2410_gpio_pullup(S3C2410_GPE8, 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg); - -#ifdef CONFIG_CPU_S3C2440 - -extern int s3c2440_set_dsc(unsigned int pin, unsigned int value); - -#endif /* CONFIG_CPU_S3C2440 */ - -#ifdef CONFIG_CPU_S3C2412 - -extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state); - -#endif /* CONFIG_CPU_S3C2412 */ - -#endif /* __ASSEMBLY__ */ - -#include -#include - -/* machine specific hardware definitions should go after this */ - -/* currently here until moved into config (todo) */ -#define CONFIG_NO_MULTIWORD_IO - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-s3c2410/idle.h b/include/asm-arm/arch-s3c2410/idle.h deleted file mode 100644 index eed450608f9c..000000000000 --- a/include/asm-arm/arch-s3c2410/idle.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/idle.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU Idle controls -*/ - -#ifndef __ASM_ARCH_IDLE_H -#define __ASM_ARCH_IDLE_H __FILE__ - -/* This allows the over-ride of the default idle code, in case there - * is any other things to be done over idle (like DVS) -*/ - -extern void (*s3c24xx_idle)(void); - -extern void s3c24xx_default_idle(void); - -#endif /* __ASM_ARCH_IDLE_H */ diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h deleted file mode 100644 index 3756c993776c..000000000000 --- a/include/asm-arm/arch-s3c2410/io.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - * linux/include/asm-arm/arch-s3c2410/io.h - * from linux/include/asm-arm/arch-rpc/io.h - * - * Copyright (C) 1997 Russell King - * (C) 2003 Simtec Electronics -*/ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are above A28 - * and are translated to the start of IO. Note that all addresses are - * not shifted left! - */ - -#define __PORT_PCIO(x) ((x) < (1<<28)) - -#define PCIO_BASE (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_b (S3C24XX_VA_ISA_BYTE) -#define PCIO_BASE_w (S3C24XX_VA_ISA_WORD) -#define PCIO_BASE_l (S3C24XX_VA_ISA_WORD) -/* - * Dynamic IO functions - let the compiler - * optimize the expressions - */ - -#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \ -static inline void __out##fnsuffix (unsigned int val, unsigned int port) \ -{ \ - unsigned long temp; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "str" instr " %1, [%0, #0 ] @ out" #fnsuffix \ - : "=&r" (temp) \ - : "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ -} - - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "cmp %2, #(1<<28)\n\t" \ - "mov %0, %2\n\t" \ - "addcc %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, #0 ] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE_##fnsuffix) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__ioaddr (unsigned long port) -{ - return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port; -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) \ - DECLARE_DYN_OUT(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"h") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions - * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. - */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, #0] @ outbc" \ - : : "r" (value), "r" ((port))); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, #0] @ inbc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "strh %0, [%1, %2] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), \ - "r" (PCIO_BASE + (port))); \ - } else \ - __asm__ __volatile__( \ - "strh %0, [%1, #0] @ outwc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) { \ - if ((port) < 256 && (port) > -256 ) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE), \ - "Jr" ((port))); \ - else if ((port) > 0) \ - __asm__ __volatile__( \ - "ldrh %0, [%1, %2] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port) & ~0xff)), \ - "Jr" (((port) & 0xff))); \ - else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) \ - : "r" (PCIO_BASE + ((port)))); \ - } else \ - __asm__ __volatile__( \ - "ldrh %0, [%1, #0] @ inwc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (v), "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, #0] @ outlc" \ - : : "r" (v), "r" ((port))); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port))); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, #0] @ inlc" \ - : "=r" (result) : "r" ((port))); \ - result; \ -}) - -#define __ioaddrc(port) ((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port))) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) -#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) -#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) -#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) - -/* - * 1:1 mapping for ioremapped regions. - */ -#define __mem_pci(x) (x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h deleted file mode 100644 index f5435d8c3769..000000000000 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ /dev/null @@ -1,166 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/irqs.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#ifndef __ASM_ARM_IRQ_H -#error "Do not include this directly, instead #include " -#endif - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - */ - -#define S3C2410_CPUIRQ_OFFSET (16) - -#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET) - -/* main cpu interrupts */ -#define IRQ_EINT0 S3C2410_IRQ(0) /* 16 */ -#define IRQ_EINT1 S3C2410_IRQ(1) -#define IRQ_EINT2 S3C2410_IRQ(2) -#define IRQ_EINT3 S3C2410_IRQ(3) -#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */ -#define IRQ_EINT8t23 S3C2410_IRQ(5) -#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */ -#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */ -#define IRQ_BATT_FLT S3C2410_IRQ(7) -#define IRQ_TICK S3C2410_IRQ(8) /* 24 */ -#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */ -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3 S3C2410_IRQ(13) -#define IRQ_TIMER4 S3C2410_IRQ(14) -#define IRQ_UART2 S3C2410_IRQ(15) -#define IRQ_LCD S3C2410_IRQ(16) /* 32 */ -#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */ -#define IRQ_DMA1 S3C2410_IRQ(18) -#define IRQ_DMA2 S3C2410_IRQ(19) -#define IRQ_DMA3 S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_RESERVED24 S3C2410_IRQ(24) /* 40 */ -#define IRQ_NFCON S3C2410_IRQ(24) /* for s3c2440 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_UART0 S3C2410_IRQ(28) /* 44 */ -#define IRQ_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) -#define IRQ_ADCPARENT S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT5 S3C2410_IRQ(33) -#define IRQ_EINT6 S3C2410_IRQ(34) -#define IRQ_EINT7 S3C2410_IRQ(35) -#define IRQ_EINT8 S3C2410_IRQ(36) -#define IRQ_EINT9 S3C2410_IRQ(37) -#define IRQ_EINT10 S3C2410_IRQ(38) -#define IRQ_EINT11 S3C2410_IRQ(39) -#define IRQ_EINT12 S3C2410_IRQ(40) -#define IRQ_EINT13 S3C2410_IRQ(41) -#define IRQ_EINT14 S3C2410_IRQ(42) -#define IRQ_EINT15 S3C2410_IRQ(43) -#define IRQ_EINT16 S3C2410_IRQ(44) -#define IRQ_EINT17 S3C2410_IRQ(45) -#define IRQ_EINT18 S3C2410_IRQ(46) -#define IRQ_EINT19 S3C2410_IRQ(47) -#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */ -#define IRQ_EINT21 S3C2410_IRQ(49) -#define IRQ_EINT22 S3C2410_IRQ(50) -#define IRQ_EINT23 S3C2410_IRQ(51) - - -#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) - -#define IRQ_LCD_FIFO S3C2410_IRQ(52) -#define IRQ_LCD_FRAME S3C2410_IRQ(53) - -/* IRQs for the interal UARTs, and ADC - * these need to be ordered in number of appearance in the - * SUBSRC mask register -*/ - -#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54) - -#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1) -#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2) - -#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */ -#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4) -#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5) - -#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */ -#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7) -#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8) - -#define IRQ_TC S3C2410_IRQSUB(9) -#define IRQ_ADC S3C2410_IRQSUB(10) - -/* extra irqs for s3c2412 */ - -#define IRQ_S3C2412_CFSDI S3C2410_IRQ(21) - -#define IRQ_S3C2412_SDI S3C2410_IRQSUB(13) -#define IRQ_S3C2412_CF S3C2410_IRQSUB(14) - -/* extra irqs for s3c2440 */ - -#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */ -#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */ -#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13) -#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14) - -/* irqs for s3c2443 */ - -#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ -#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ -#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ -#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ -#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ - -#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) -#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) -#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) -#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17) - -#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18) -#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19) -#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20) -#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21) -#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22) -#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23) - -/* UART3 */ -#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24) -#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25) -#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26) - -#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27) -#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28) - -#ifdef CONFIG_CPU_S3C2443 -#define NR_IRQS (IRQ_S3C2443_AC97+1) -#else -#define NR_IRQS (IRQ_S3C2440_AC97+1) -#endif - -/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */ -#define FIQ_START IRQ_EINT0 - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/leds-gpio.h b/include/asm-arm/arch-s3c2410/leds-gpio.h deleted file mode 100644 index 800846ebddba..000000000000 --- a/include/asm-arm/arch-s3c2410/leds-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/leds-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX - LEDs GPIO connector - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_LEDSGPIO_H -#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" - -#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ -#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ - -struct s3c24xx_led_platdata { - unsigned int gpio; - unsigned int flags; - - char *name; - char *def_trigger; -}; - -#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h deleted file mode 100644 index b33ed3b05ef5..000000000000 --- a/include/asm-arm/arch-s3c2410/map.h +++ /dev/null @@ -1,178 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/map.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H - -#include - -#define S3C2410_ADDR(x) S3C_ADDR(x) - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* USB host controller */ -#define S3C2410_PA_USBHOST (0x49000000) -#define S3C24XX_SZ_USBHOST SZ_1M - -/* DMA controller */ -#define S3C2410_PA_DMA (0x4B000000) -#define S3C24XX_SZ_DMA SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C2410_PA_CLKPWR (0x4C000000) -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* LCD controller */ -#define S3C2410_PA_LCD (0x4D000000) -#define S3C24XX_SZ_LCD SZ_1M - -/* NAND flash controller */ -#define S3C2410_PA_NAND (0x4E000000) -#define S3C24XX_SZ_NAND SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* IIC hardware controller */ -#define S3C2410_PA_IIC (0x54000000) -#define S3C24XX_SZ_IIC SZ_1M - -/* IIS controller */ -#define S3C2410_PA_IIS (0x55000000) -#define S3C24XX_SZ_IIS SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - -/* RTC */ -#define S3C2410_PA_RTC (0x57000000) -#define S3C24XX_SZ_RTC SZ_1M - -/* ADC */ -#define S3C2410_PA_ADC (0x58000000) -#define S3C24XX_SZ_ADC SZ_1M - -/* SPI */ -#define S3C2410_PA_SPI (0x59000000) -#define S3C24XX_SZ_SPI SZ_1M - -/* SDI */ -#define S3C2410_PA_SDI (0x5A000000) -#define S3C24XX_SZ_SDI SZ_1M - -/* CAMIF */ -#define S3C2440_PA_CAMIF (0x4F000000) -#define S3C2440_SZ_CAMIF SZ_1M - -/* AC97 */ - -#define S3C2440_PA_AC97 (0x5B000000) -#define S3C2440_SZ_AC97 SZ_1M - -/* S3C2443 High-speed SD/MMC */ -#define S3C2443_PA_HSMMC (0x4A800000) -#define S3C2443_SZ_HSMMC (256) - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* physical addresses of all the chip-select areas */ - -#define S3C2410_CS0 (0x00000000) -#define S3C2410_CS1 (0x08000000) -#define S3C2410_CS2 (0x10000000) -#define S3C2410_CS3 (0x18000000) -#define S3C2410_CS4 (0x20000000) -#define S3C2410_CS5 (0x28000000) -#define S3C2410_CS6 (0x30000000) -#define S3C2410_CS7 (0x38000000) - -#define S3C2410_SDRAM_PA (S3C2410_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2410_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST -#define S3C24XX_PA_DMA S3C2410_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART -#define S3C24XX_PA_TIMER S3C2410_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2410_PA_IIC -#define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO -#define S3C24XX_PA_RTC S3C2410_PA_RTC -#define S3C24XX_PA_ADC S3C2410_PA_ADC -#define S3C24XX_PA_SPI S3C2410_PA_SPI - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/include/asm-arm/arch-s3c2410/memory.h b/include/asm-arm/arch-s3c2410/memory.h deleted file mode 100644 index 533e2436e707..000000000000 --- a/include/asm-arm/arch-s3c2410/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PHYS_OFFSET UL(0x30000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -#endif diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h deleted file mode 100644 index 229ab2351db6..000000000000 --- a/include/asm-arm/arch-s3c2410/osiris-cpld.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h - * - * Copyright 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_OSIRISCPLD_H -#define __ASM_ARCH_OSIRISCPLD_H - -/* CTRL0 - NAND WP control */ - -#define OSIRIS_CTRL0_NANDSEL (0x3) -#define OSIRIS_CTRL0_BOOT_INT (1<<3) -#define OSIRIS_CTRL0_PCMCIA (1<<4) -#define OSIRIS_CTRL0_FIX8 (1<<5) -#define OSIRIS_CTRL0_PCMCIA_nWAIT (1<<6) -#define OSIRIS_CTRL0_PCMCIA_nIOIS16 (1<<7) - -#define OSIRIS_CTRL1_FIX8 (1<<0) - -#define OSIRIS_ID_REVMASK (0x7) - -#endif /* __ASM_ARCH_OSIRISCPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h deleted file mode 100644 index b5c74d2b9aaa..000000000000 --- a/include/asm-arm/arch-s3c2410/osiris-map.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/osiris-map.h - * - * (c) 2005 Simtec Electronics - * http://www.simtec.co.uk/products/ - * Ben Dooks - * - * OSIRIS - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -#ifndef __ASM_ARCH_OSIRISMAP_H -#define __ASM_ARCH_OSIRISMAP_H - -/* start peripherals off after the S3C2410 */ - -#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x04000000)) - -#define OSIRIS_PA_CPLD (S3C2410_CS1 | (1<<26)) - -/* we put the CPLD registers next, to get them out of the way */ - -#define OSIRIS_VA_CTRL0 OSIRIS_IOADDR(0x00000000) -#define OSIRIS_PA_CTRL0 (OSIRIS_PA_CPLD) - -#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00100000) -#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD + (1<<23)) - -#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00200000) -#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00300000) -#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<23)) - -#define OSIRIS_VA_IDREG OSIRIS_IOADDR(0x00700000) -#define OSIRIS_PA_IDREG (OSIRIS_PA_CPLD + (7<<23)) - -#endif /* __ASM_ARCH_OSIRISMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/otom-map.h b/include/asm-arm/arch-s3c2410/otom-map.h deleted file mode 100644 index e40c93429854..000000000000 --- a/include/asm-arm/arch-s3c2410/otom-map.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/otom-map.h - * - * (c) 2005 Guillaume GOURAT / NexVision - * guillaume.gourat@nexvision.fr - * - * NexVision OTOM board memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x01300000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. - */ - -#ifndef __ASM_ARCH_OTOMMAP_H -#define __ASM_ARCH_OTOMMAP_H - -#define OTOM_PA_CS8900A_BASE (S3C2410_CS3 + 0x01000000) /* nGCS3 +0x01000000 */ -#define OTOM_VA_CS8900A_BASE S3C2410_ADDR(0x04000000) /* 0xF4000000 */ - -/* physical offset addresses for the peripherals */ - -#define OTOM_PA_FLASH0_BASE (S3C2410_CS0) /* Bank 0 */ - -#endif /* __ASM_ARCH_OTOMMAP_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h deleted file mode 100644 index 37661358b42b..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ /dev/null @@ -1,197 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-clock.h - * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_CLOCK -#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $" - -#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s))) - -#define S3C2410_LOCKTIME S3C2410_CLKREG(0x00) -#define S3C2410_MPLLCON S3C2410_CLKREG(0x04) -#define S3C2410_UPLLCON S3C2410_CLKREG(0x08) -#define S3C2410_CLKCON S3C2410_CLKREG(0x0C) -#define S3C2410_CLKSLOW S3C2410_CLKREG(0x10) -#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14) - -#define S3C2410_CLKCON_IDLE (1<<2) -#define S3C2410_CLKCON_POWER (1<<3) -#define S3C2410_CLKCON_NAND (1<<4) -#define S3C2410_CLKCON_LCDC (1<<5) -#define S3C2410_CLKCON_USBH (1<<6) -#define S3C2410_CLKCON_USBD (1<<7) -#define S3C2410_CLKCON_PWMT (1<<8) -#define S3C2410_CLKCON_SDI (1<<9) -#define S3C2410_CLKCON_UART0 (1<<10) -#define S3C2410_CLKCON_UART1 (1<<11) -#define S3C2410_CLKCON_UART2 (1<<12) -#define S3C2410_CLKCON_GPIO (1<<13) -#define S3C2410_CLKCON_RTC (1<<14) -#define S3C2410_CLKCON_ADC (1<<15) -#define S3C2410_CLKCON_IIC (1<<16) -#define S3C2410_CLKCON_IIS (1<<17) -#define S3C2410_CLKCON_SPI (1<<18) - -#define S3C2410_PLLCON_MDIVSHIFT 12 -#define S3C2410_PLLCON_PDIVSHIFT 4 -#define S3C2410_PLLCON_SDIVSHIFT 0 -#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C2410_PLLCON_SDIVMASK 3 - -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - -#define S3C2410_CLKDIVN_PDIVN (1<<0) -#define S3C2410_CLKDIVN_HDIVN (1<<1) - -#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) -#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) -#define S3C2410_CLKSLOW_SLOW (1<<4) -#define S3C2410_CLKSLOW_SLOWVAL(x) (x) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) - -#ifndef __ASSEMBLY__ - -#include - -static inline unsigned int -s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; - - mdiv &= S3C2410_PLLCON_MDIVMASK; - pdiv &= S3C2410_PLLCON_PDIVMASK; - sdiv &= S3C2410_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASSEMBLY__ */ - -#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) - -/* extra registers */ -#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18) - -#define S3C2440_CLKCON_CAMERA (1<<19) -#define S3C2440_CLKCON_AC97 (1<<20) - -#define S3C2440_CLKDIVN_PDIVN (1<<0) -#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) -#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) -#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) -#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) -#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) -#define S3C2440_CLKDIVN_UCLK (1<<3) - -#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) -#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) -#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) -#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) -#define S3C2440_CAMDIVN_DVSEN (1<<12) - -#define S3C2442_CAMDIVN_CAMCLK_DIV3 (1<<5) - -#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) - -#define S3C2412_OSCSET S3C2410_CLKREG(0x18) -#define S3C2412_CLKSRC S3C2410_CLKREG(0x1C) - -#define S3C2412_PLLCON_OFF (1<<20) - -#define S3C2412_CLKDIVN_PDIVN (1<<2) -#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2412_CLKDIVN_ARMDIVN (1<<3) -#define S3C2412_CLKDIVN_DVSEN (1<<4) -#define S3C2412_CLKDIVN_HALFHCLK (1<<5) -#define S3C2412_CLKDIVN_USB48DIV (1<<6) -#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8) -#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8) -#define S3C2412_CLKDIVN_I2SDIV_MASK (15<<12) -#define S3C2412_CLKDIVN_I2SDIV_SHIFT (12) -#define S3C2412_CLKDIVN_CAMDIV_MASK (15<<16) -#define S3C2412_CLKDIVN_CAMDIV_SHIFT (16) - -#define S3C2412_CLKCON_WDT (1<<28) -#define S3C2412_CLKCON_SPI (1<<27) -#define S3C2412_CLKCON_IIS (1<<26) -#define S3C2412_CLKCON_IIC (1<<25) -#define S3C2412_CLKCON_ADC (1<<24) -#define S3C2412_CLKCON_RTC (1<<23) -#define S3C2412_CLKCON_GPIO (1<<22) -#define S3C2412_CLKCON_UART2 (1<<21) -#define S3C2412_CLKCON_UART1 (1<<20) -#define S3C2412_CLKCON_UART0 (1<<19) -#define S3C2412_CLKCON_SDI (1<<18) -#define S3C2412_CLKCON_PWMT (1<<17) -#define S3C2412_CLKCON_USBD (1<<16) -#define S3C2412_CLKCON_CAMCLK (1<<15) -#define S3C2412_CLKCON_UARTCLK (1<<14) -/* missing 13 */ -#define S3C2412_CLKCON_USB_HOST48 (1<<12) -#define S3C2412_CLKCON_USB_DEV48 (1<<11) -#define S3C2412_CLKCON_HCLKdiv2 (1<<10) -#define S3C2412_CLKCON_HCLKx2 (1<<9) -#define S3C2412_CLKCON_SDRAM (1<<8) -/* missing 7 */ -#define S3C2412_CLKCON_USBH S3C2410_CLKCON_USBH -#define S3C2412_CLKCON_LCDC S3C2410_CLKCON_LCDC -#define S3C2412_CLKCON_NAND S3C2410_CLKCON_NAND -#define S3C2412_CLKCON_DMA3 (1<<3) -#define S3C2412_CLKCON_DMA2 (1<<2) -#define S3C2412_CLKCON_DMA1 (1<<1) -#define S3C2412_CLKCON_DMA0 (1<<0) - -/* clock sourec controls */ - -#define S3C2412_CLKSRC_EXTCLKDIV_MASK (7 << 0) -#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT (0) -#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV (1<<3) -#define S3C2412_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2412_CLKSRC_USYSCLK_UPLL (1<<5) -#define S3C2412_CLKSRC_UARTCLK_MPLL (1<<8) -#define S3C2412_CLKSRC_I2SCLK_MPLL (1<<9) -#define S3C2412_CLKSRC_USBCLK_HCLK (1<<10) -#define S3C2412_CLKSRC_CAMCLK_HCLK (1<<11) -#define S3C2412_CLKSRC_UREFCLK_EXTCLK (1<<12) -#define S3C2412_CLKSRC_EREFCLK_EXTCLK (1<<14) - -#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */ - -#endif /* __ASM_ARM_REGS_CLOCK */ diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h deleted file mode 100644 index 1235df70f34e..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-dsc.h +++ /dev/null @@ -1,184 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-dsc.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440/S3C2412 Signal Drive Strength Control -*/ - - -#ifndef __ASM_ARCH_REGS_DSC_H -#define __ASM_ARCH_REGS_DSC_H "2440-dsc" - -#if defined(CONFIG_CPU_S3C2412) -#define S3C2412_DSC0 S3C2410_GPIOREG(0xdc) -#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0) -#endif - -#if defined(CONFIG_CPU_S3C244X) - -#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4) -#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8) - -#define S3C2440_SELECT_DSC0 (0) -#define S3C2440_SELECT_DSC1 (1<<31) - -#define S3C2440_DSC_GETSHIFT(x) ((x) & 31) - -#define S3C2440_DSC0_DISABLE (1<<31) - -#define S3C2440_DSC0_ADDR (S3C2440_SELECT_DSC0 | 8) -#define S3C2440_DSC0_ADDR_12mA (0<<8) -#define S3C2440_DSC0_ADDR_10mA (1<<8) -#define S3C2440_DSC0_ADDR_8mA (2<<8) -#define S3C2440_DSC0_ADDR_6mA (3<<8) -#define S3C2440_DSC0_ADDR_MASK (3<<8) - -/* D24..D31 */ -#define S3C2440_DSC0_DATA3 (S3C2440_SELECT_DSC0 | 6) -#define S3C2440_DSC0_DATA3_12mA (0<<6) -#define S3C2440_DSC0_DATA3_10mA (1<<6) -#define S3C2440_DSC0_DATA3_8mA (2<<6) -#define S3C2440_DSC0_DATA3_6mA (3<<6) -#define S3C2440_DSC0_DATA3_MASK (3<<6) - -/* D16..D23 */ -#define S3C2440_DSC0_DATA2 (S3C2440_SELECT_DSC0 | 4) -#define S3C2440_DSC0_DATA2_12mA (0<<4) -#define S3C2440_DSC0_DATA2_10mA (1<<4) -#define S3C2440_DSC0_DATA2_8mA (2<<4) -#define S3C2440_DSC0_DATA2_6mA (3<<4) -#define S3C2440_DSC0_DATA2_MASK (3<<4) - -/* D8..D15 */ -#define S3C2440_DSC0_DATA1 (S3C2440_SELECT_DSC0 | 2) -#define S3C2440_DSC0_DATA1_12mA (0<<2) -#define S3C2440_DSC0_DATA1_10mA (1<<2) -#define S3C2440_DSC0_DATA1_8mA (2<<2) -#define S3C2440_DSC0_DATA1_6mA (3<<2) -#define S3C2440_DSC0_DATA1_MASK (3<<2) - -/* D0..D7 */ -#define S3C2440_DSC0_DATA0 (S3C2440_SELECT_DSC0 | 0) -#define S3C2440_DSC0_DATA0_12mA (0<<0) -#define S3C2440_DSC0_DATA0_10mA (1<<0) -#define S3C2440_DSC0_DATA0_8mA (2<<0) -#define S3C2440_DSC0_DATA0_6mA (3<<0) -#define S3C2440_DSC0_DATA0_MASK (3<<0) - -#define S3C2440_DSC1_SCK1 (S3C2440_SELECT_DSC1 | 28) -#define S3C2440_DSC1_SCK1_12mA (0<<28) -#define S3C2440_DSC1_SCK1_10mA (1<<28) -#define S3C2440_DSC1_SCK1_8mA (2<<28) -#define S3C2440_DSC1_SCK1_6mA (3<<28) -#define S3C2440_DSC1_SCK1_MASK (3<<28) - -#define S3C2440_DSC1_SCK0 (S3C2440_SELECT_DSC1 | 26) -#define S3C2440_DSC1_SCK0_12mA (0<<26) -#define S3C2440_DSC1_SCK0_10mA (1<<26) -#define S3C2440_DSC1_SCK0_8mA (2<<26) -#define S3C2440_DSC1_SCK0_6mA (3<<26) -#define S3C2440_DSC1_SCK0_MASK (3<<26) - -#define S3C2440_DSC1_SCKE (S3C2440_SELECT_DSC1 | 24) -#define S3C2440_DSC1_SCKE_10mA (0<<24) -#define S3C2440_DSC1_SCKE_8mA (1<<24) -#define S3C2440_DSC1_SCKE_6mA (2<<24) -#define S3C2440_DSC1_SCKE_4mA (3<<24) -#define S3C2440_DSC1_SCKE_MASK (3<<24) - -/* SDRAM nRAS/nCAS */ -#define S3C2440_DSC1_SDR (S3C2440_SELECT_DSC1 | 22) -#define S3C2440_DSC1_SDR_10mA (0<<22) -#define S3C2440_DSC1_SDR_8mA (1<<22) -#define S3C2440_DSC1_SDR_6mA (2<<22) -#define S3C2440_DSC1_SDR_4mA (3<<22) -#define S3C2440_DSC1_SDR_MASK (3<<22) - -/* NAND Flash Controller */ -#define S3C2440_DSC1_NFC (S3C2440_SELECT_DSC1 | 20) -#define S3C2440_DSC1_NFC_10mA (0<<20) -#define S3C2440_DSC1_NFC_8mA (1<<20) -#define S3C2440_DSC1_NFC_6mA (2<<20) -#define S3C2440_DSC1_NFC_4mA (3<<20) -#define S3C2440_DSC1_NFC_MASK (3<<20) - -/* nBE[0..3] */ -#define S3C2440_DSC1_nBE (S3C2440_SELECT_DSC1 | 18) -#define S3C2440_DSC1_nBE_10mA (0<<18) -#define S3C2440_DSC1_nBE_8mA (1<<18) -#define S3C2440_DSC1_nBE_6mA (2<<18) -#define S3C2440_DSC1_nBE_4mA (3<<18) -#define S3C2440_DSC1_nBE_MASK (3<<18) - -#define S3C2440_DSC1_WOE (S3C2440_SELECT_DSC1 | 16) -#define S3C2440_DSC1_WOE_10mA (0<<16) -#define S3C2440_DSC1_WOE_8mA (1<<16) -#define S3C2440_DSC1_WOE_6mA (2<<16) -#define S3C2440_DSC1_WOE_4mA (3<<16) -#define S3C2440_DSC1_WOE_MASK (3<<16) - -#define S3C2440_DSC1_CS7 (S3C2440_SELECT_DSC1 | 14) -#define S3C2440_DSC1_CS7_10mA (0<<14) -#define S3C2440_DSC1_CS7_8mA (1<<14) -#define S3C2440_DSC1_CS7_6mA (2<<14) -#define S3C2440_DSC1_CS7_4mA (3<<14) -#define S3C2440_DSC1_CS7_MASK (3<<14) - -#define S3C2440_DSC1_CS6 (S3C2440_SELECT_DSC1 | 12) -#define S3C2440_DSC1_CS6_10mA (0<<12) -#define S3C2440_DSC1_CS6_8mA (1<<12) -#define S3C2440_DSC1_CS6_6mA (2<<12) -#define S3C2440_DSC1_CS6_4mA (3<<12) -#define S3C2440_DSC1_CS6_MASK (3<<12) - -#define S3C2440_DSC1_CS5 (S3C2440_SELECT_DSC1 | 10) -#define S3C2440_DSC1_CS5_10mA (0<<10) -#define S3C2440_DSC1_CS5_8mA (1<<10) -#define S3C2440_DSC1_CS5_6mA (2<<10) -#define S3C2440_DSC1_CS5_4mA (3<<10) -#define S3C2440_DSC1_CS5_MASK (3<<10) - -#define S3C2440_DSC1_CS4 (S3C2440_SELECT_DSC1 | 8) -#define S3C2440_DSC1_CS4_10mA (0<<8) -#define S3C2440_DSC1_CS4_8mA (1<<8) -#define S3C2440_DSC1_CS4_6mA (2<<8) -#define S3C2440_DSC1_CS4_4mA (3<<8) -#define S3C2440_DSC1_CS4_MASK (3<<8) - -#define S3C2440_DSC1_CS3 (S3C2440_SELECT_DSC1 | 6) -#define S3C2440_DSC1_CS3_10mA (0<<6) -#define S3C2440_DSC1_CS3_8mA (1<<6) -#define S3C2440_DSC1_CS3_6mA (2<<6) -#define S3C2440_DSC1_CS3_4mA (3<<6) -#define S3C2440_DSC1_CS3_MASK (3<<6) - -#define S3C2440_DSC1_CS2 (S3C2440_SELECT_DSC1 | 4) -#define S3C2440_DSC1_CS2_10mA (0<<4) -#define S3C2440_DSC1_CS2_8mA (1<<4) -#define S3C2440_DSC1_CS2_6mA (2<<4) -#define S3C2440_DSC1_CS2_4mA (3<<4) -#define S3C2440_DSC1_CS2_MASK (3<<4) - -#define S3C2440_DSC1_CS1 (S3C2440_SELECT_DSC1 | 2) -#define S3C2440_DSC1_CS1_10mA (0<<2) -#define S3C2440_DSC1_CS1_8mA (1<<2) -#define S3C2440_DSC1_CS1_6mA (2<<2) -#define S3C2440_DSC1_CS1_4mA (3<<2) -#define S3C2440_DSC1_CS1_MASK (3<<2) - -#define S3C2440_DSC1_CS0 (S3C2440_SELECT_DSC1 | 0) -#define S3C2440_DSC1_CS0_10mA (0<<0) -#define S3C2440_DSC1_CS0_8mA (1<<0) -#define S3C2440_DSC1_CS0_6mA (2<<0) -#define S3C2440_DSC1_CS0_4mA (3<<0) -#define S3C2440_DSC1_CS0_MASK (3<<0) - -#endif /* CONFIG_CPU_S3C2440 */ - -#endif /* __ASM_ARCH_REGS_DSC_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h deleted file mode 100644 index 497dd06e2c99..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ /dev/null @@ -1,1163 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-gpio.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 GPIO register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $" - -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) - -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2400_MISCCR -#else -#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ - - -/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ - -#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) -#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) -#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ - (2 * (S3C2400_BANKNUM(pin)-2))) - -#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ - S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ - S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) - - -#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) -#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) - -/* general configuration options */ - -#define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ -#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) -#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ -#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ - -/* register address for the GPIO registers. - * S3C24XX_GPIOREG2 is for the second set of registers in the - * GPIO which move between s3c2410 and s3c2412 type systems */ - -#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2) - - -/* configure GPIO ports A..G */ - -/* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output - * 1 makes port special function, this is default -*/ -#define S3C2410_GPACON S3C2410_GPIOREG(0x00) -#define S3C2410_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - -#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0) -#define S3C2410_GPA0_OUT (0<<0) -#define S3C2410_GPA0_ADDR0 (1<<0) - -#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1) -#define S3C2410_GPA1_OUT (0<<1) -#define S3C2410_GPA1_ADDR16 (1<<1) - -#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2) -#define S3C2410_GPA2_OUT (0<<2) -#define S3C2410_GPA2_ADDR17 (1<<2) - -#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3) -#define S3C2410_GPA3_OUT (0<<3) -#define S3C2410_GPA3_ADDR18 (1<<3) - -#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4) -#define S3C2410_GPA4_OUT (0<<4) -#define S3C2410_GPA4_ADDR19 (1<<4) - -#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5) -#define S3C2410_GPA5_OUT (0<<5) -#define S3C2410_GPA5_ADDR20 (1<<5) - -#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6) -#define S3C2410_GPA6_OUT (0<<6) -#define S3C2410_GPA6_ADDR21 (1<<6) - -#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7) -#define S3C2410_GPA7_OUT (0<<7) -#define S3C2410_GPA7_ADDR22 (1<<7) - -#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8) -#define S3C2410_GPA8_OUT (0<<8) -#define S3C2410_GPA8_ADDR23 (1<<8) - -#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9) -#define S3C2410_GPA9_OUT (0<<9) -#define S3C2410_GPA9_ADDR24 (1<<9) - -#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10) -#define S3C2410_GPA10_OUT (0<<10) -#define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - -#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11) -#define S3C2410_GPA11_OUT (0<<11) -#define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - -#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12) -#define S3C2410_GPA12_OUT (0<<12) -#define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - -#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13) -#define S3C2410_GPA13_OUT (0<<13) -#define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - -#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14) -#define S3C2410_GPA14_OUT (0<<14) -#define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - -#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15) -#define S3C2410_GPA15_OUT (0<<15) -#define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - -#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16) -#define S3C2410_GPA16_OUT (0<<16) -#define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - -#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17) -#define S3C2410_GPA17_OUT (0<<17) -#define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - -#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18) -#define S3C2410_GPA18_OUT (0<<18) -#define S3C2410_GPA18_ALE (1<<18) - -#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19) -#define S3C2410_GPA19_OUT (0<<19) -#define S3C2410_GPA19_nFWE (1<<19) - -#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20) -#define S3C2410_GPA20_OUT (0<<20) -#define S3C2410_GPA20_nFRE (1<<20) - -#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21) -#define S3C2410_GPA21_OUT (0<<21) -#define S3C2410_GPA21_nRSTOUT (1<<21) - -#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22) -#define S3C2410_GPA22_OUT (0<<22) -#define S3C2410_GPA22_nFCE (1<<22) - -/* 0x08 and 0x0c are reserved on S3C2410 */ - -/* S3C2410: - * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=special function, 11=reserved - - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - - * bit 0,1 = pin 0, 2,3= pin 1... - * - * CPBUP = pull up resistor control, 1=disabled, 0=enabled -*/ - -#define S3C2410_GPBCON S3C2410_GPIOREG(0x10) -#define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) -#define S3C2410_GPBUP S3C2410_GPIOREG(0x18) - -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - -/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ - -#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0) -#define S3C2410_GPB0_INP (0x00 << 0) -#define S3C2410_GPB0_OUTP (0x01 << 0) -#define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) - -#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1) -#define S3C2410_GPB1_INP (0x00 << 2) -#define S3C2410_GPB1_OUTP (0x01 << 2) -#define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) - -#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2) -#define S3C2410_GPB2_INP (0x00 << 4) -#define S3C2410_GPB2_OUTP (0x01 << 4) -#define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) - -#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3) -#define S3C2410_GPB3_INP (0x00 << 6) -#define S3C2410_GPB3_OUTP (0x01 << 6) -#define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) - -#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4) -#define S3C2410_GPB4_INP (0x00 << 8) -#define S3C2410_GPB4_OUTP (0x01 << 8) -#define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) -#define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) - -#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5) -#define S3C2410_GPB5_INP (0x00 << 10) -#define S3C2410_GPB5_OUTP (0x01 << 10) -#define S3C2410_GPB5_nXBACK (0x02 << 10) -#define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) - -#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6) -#define S3C2410_GPB6_INP (0x00 << 12) -#define S3C2410_GPB6_OUTP (0x01 << 12) -#define S3C2410_GPB6_nXBREQ (0x02 << 12) -#define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) - -#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7) -#define S3C2410_GPB7_INP (0x00 << 14) -#define S3C2410_GPB7_OUTP (0x01 << 14) -#define S3C2410_GPB7_nXDACK1 (0x02 << 14) -#define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) - -#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8) -#define S3C2410_GPB8_INP (0x00 << 16) -#define S3C2410_GPB8_OUTP (0x01 << 16) -#define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) - -#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9) -#define S3C2410_GPB9_INP (0x00 << 18) -#define S3C2410_GPB9_OUTP (0x01 << 18) -#define S3C2410_GPB9_nXDACK0 (0x02 << 18) -#define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) - -#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10) -#define S3C2410_GPB10_INP (0x00 << 20) -#define S3C2410_GPB10_OUTP (0x01 << 20) -#define S3C2410_GPB10_nXDRE0 (0x02 << 20) -#define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11) -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12) -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13) -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14) -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15) -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) - -#define S3C2410_GPB_PUPDIS(x) (1<<(x)) - -/* Port C consits of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's sync/etc. -*/ - -#define S3C2410_GPCCON S3C2410_GPIOREG(0x20) -#define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) -#define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - -#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0) -#define S3C2410_GPC0_INP (0x00 << 0) -#define S3C2410_GPC0_OUTP (0x01 << 0) -#define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - -#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1) -#define S3C2410_GPC1_INP (0x00 << 2) -#define S3C2410_GPC1_OUTP (0x01 << 2) -#define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - -#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2) -#define S3C2410_GPC2_INP (0x00 << 4) -#define S3C2410_GPC2_OUTP (0x01 << 4) -#define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - -#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3) -#define S3C2410_GPC3_INP (0x00 << 6) -#define S3C2410_GPC3_OUTP (0x01 << 6) -#define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - -#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4) -#define S3C2410_GPC4_INP (0x00 << 8) -#define S3C2410_GPC4_OUTP (0x01 << 8) -#define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - -#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5) -#define S3C2410_GPC5_INP (0x00 << 10) -#define S3C2410_GPC5_OUTP (0x01 << 10) -#define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - -#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6) -#define S3C2410_GPC6_INP (0x00 << 12) -#define S3C2410_GPC6_OUTP (0x01 << 12) -#define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - -#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7) -#define S3C2410_GPC7_INP (0x00 << 14) -#define S3C2410_GPC7_OUTP (0x01 << 14) -#define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - -#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8) -#define S3C2410_GPC8_INP (0x00 << 16) -#define S3C2410_GPC8_OUTP (0x01 << 16) -#define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - -#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9) -#define S3C2410_GPC9_INP (0x00 << 18) -#define S3C2410_GPC9_OUTP (0x01 << 18) -#define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - -#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10) -#define S3C2410_GPC10_INP (0x00 << 20) -#define S3C2410_GPC10_OUTP (0x01 << 20) -#define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - -#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11) -#define S3C2410_GPC11_INP (0x00 << 22) -#define S3C2410_GPC11_OUTP (0x01 << 22) -#define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - -#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12) -#define S3C2410_GPC12_INP (0x00 << 24) -#define S3C2410_GPC12_OUTP (0x01 << 24) -#define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - -#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13) -#define S3C2410_GPC13_INP (0x00 << 26) -#define S3C2410_GPC13_OUTP (0x01 << 26) -#define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - -#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14) -#define S3C2410_GPC14_INP (0x00 << 28) -#define S3C2410_GPC14_OUTP (0x01 << 28) -#define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - -#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15) -#define S3C2410_GPC15_INP (0x00 << 30) -#define S3C2410_GPC15_OUTP (0x01 << 30) -#define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - -#define S3C2410_GPC_PUPDIS(x) (1<<(x)) - -/* - * S3C2410: Port D consists of 16 GPIO/Special function - * - * almost identical setup to port b, but the special functions are mostly - * to do with the video system's data. - * - * S3C2400: Port D consists of 11 GPIO/Special function - * - * almost identical setup to port c -*/ - -#define S3C2410_GPDCON S3C2410_GPIOREG(0x30) -#define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) -#define S3C2410_GPDUP S3C2410_GPIOREG(0x38) - -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - -#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0) -#define S3C2410_GPD0_INP (0x00 << 0) -#define S3C2410_GPD0_OUTP (0x01 << 0) -#define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) -#define S3C2442_GPD0_nSPICS1 (0x03 << 0) - -#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1) -#define S3C2410_GPD1_INP (0x00 << 2) -#define S3C2410_GPD1_OUTP (0x01 << 2) -#define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) -#define S3C2442_GPD1_SPICLK1 (0x03 << 2) - -#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2) -#define S3C2410_GPD2_INP (0x00 << 4) -#define S3C2410_GPD2_OUTP (0x01 << 4) -#define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) - -#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3) -#define S3C2410_GPD3_INP (0x00 << 6) -#define S3C2410_GPD3_OUTP (0x01 << 6) -#define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) - -#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4) -#define S3C2410_GPD4_INP (0x00 << 8) -#define S3C2410_GPD4_OUTP (0x01 << 8) -#define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) - -#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5) -#define S3C2410_GPD5_INP (0x00 << 10) -#define S3C2410_GPD5_OUTP (0x01 << 10) -#define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) - -#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6) -#define S3C2410_GPD6_INP (0x00 << 12) -#define S3C2410_GPD6_OUTP (0x01 << 12) -#define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) - -#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7) -#define S3C2410_GPD7_INP (0x00 << 14) -#define S3C2410_GPD7_OUTP (0x01 << 14) -#define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) - -#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8) -#define S3C2410_GPD8_INP (0x00 << 16) -#define S3C2410_GPD8_OUTP (0x01 << 16) -#define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) - -#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9) -#define S3C2410_GPD9_INP (0x00 << 18) -#define S3C2410_GPD9_OUTP (0x01 << 18) -#define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) -#define S3C2410_GPD9_MASK (0x03 << 18) - -#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10) -#define S3C2410_GPD10_INP (0x00 << 20) -#define S3C2410_GPD10_OUTP (0x01 << 20) -#define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) - -#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11) -#define S3C2410_GPD11_INP (0x00 << 22) -#define S3C2410_GPD11_OUTP (0x01 << 22) -#define S3C2410_GPD11_VD19 (0x02 << 22) - -#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12) -#define S3C2410_GPD12_INP (0x00 << 24) -#define S3C2410_GPD12_OUTP (0x01 << 24) -#define S3C2410_GPD12_VD20 (0x02 << 24) - -#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13) -#define S3C2410_GPD13_INP (0x00 << 26) -#define S3C2410_GPD13_OUTP (0x01 << 26) -#define S3C2410_GPD13_VD21 (0x02 << 26) - -#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14) -#define S3C2410_GPD14_INP (0x00 << 28) -#define S3C2410_GPD14_OUTP (0x01 << 28) -#define S3C2410_GPD14_VD22 (0x02 << 28) -#define S3C2410_GPD14_nSS1 (0x03 << 28) - -#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) -#define S3C2410_GPD15_INP (0x00 << 30) -#define S3C2410_GPD15_OUTP (0x01 << 30) -#define S3C2410_GPD15_VD23 (0x02 << 30) -#define S3C2410_GPD15_nSS0 (0x03 << 30) - -#define S3C2410_GPD_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port E consists of 16 GPIO/Special function - * - * again, the same as port B, but dealing with I2S, SDI, and - * more miscellaneous functions - * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * - * GPIO / interrupt inputs -*/ - -#define S3C2410_GPECON S3C2410_GPIOREG(0x40) -#define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) -#define S3C2410_GPEUP S3C2410_GPIOREG(0x48) - -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - -#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0) -#define S3C2410_GPE0_INP (0x00 << 0) -#define S3C2410_GPE0_OUTP (0x01 << 0) -#define S3C2410_GPE0_I2SLRCK (0x02 << 0) -#define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) -#define S3C2410_GPE0_MASK (0x03 << 0) - -#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1) -#define S3C2410_GPE1_INP (0x00 << 2) -#define S3C2410_GPE1_OUTP (0x01 << 2) -#define S3C2410_GPE1_I2SSCLK (0x02 << 2) -#define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) -#define S3C2410_GPE1_MASK (0x03 << 2) - -#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2) -#define S3C2410_GPE2_INP (0x00 << 4) -#define S3C2410_GPE2_OUTP (0x01 << 4) -#define S3C2410_GPE2_CDCLK (0x02 << 4) -#define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) - -#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3) -#define S3C2410_GPE3_INP (0x00 << 6) -#define S3C2410_GPE3_OUTP (0x01 << 6) -#define S3C2410_GPE3_I2SSDI (0x02 << 6) -#define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) -#define S3C2410_GPE3_nSS0 (0x03 << 6) -#define S3C2410_GPE3_MASK (0x03 << 6) - -#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4) -#define S3C2410_GPE4_INP (0x00 << 8) -#define S3C2410_GPE4_OUTP (0x01 << 8) -#define S3C2410_GPE4_I2SSDO (0x02 << 8) -#define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) -#define S3C2410_GPE4_I2SSDI (0x03 << 8) -#define S3C2410_GPE4_MASK (0x03 << 8) - -#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5) -#define S3C2410_GPE5_INP (0x00 << 10) -#define S3C2410_GPE5_OUTP (0x01 << 10) -#define S3C2410_GPE5_SDCLK (0x02 << 10) -#define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) - -#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6) -#define S3C2410_GPE6_INP (0x00 << 12) -#define S3C2410_GPE6_OUTP (0x01 << 12) -#define S3C2410_GPE6_SDCMD (0x02 << 12) -#define S3C2443_GPE6_SD1_CMD (0x02 << 12) -#define S3C2443_GPE6_AC_BITCLK (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) - -#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7) -#define S3C2410_GPE7_INP (0x00 << 14) -#define S3C2410_GPE7_OUTP (0x01 << 14) -#define S3C2410_GPE7_SDDAT0 (0x02 << 14) -#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) -#define S3C2443_GPE7_AC_SDI (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) - -#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8) -#define S3C2410_GPE8_INP (0x00 << 16) -#define S3C2410_GPE8_OUTP (0x01 << 16) -#define S3C2410_GPE8_SDDAT1 (0x02 << 16) -#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) -#define S3C2443_GPE8_AC_SDO (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) - -#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9) -#define S3C2410_GPE9_INP (0x00 << 18) -#define S3C2410_GPE9_OUTP (0x01 << 18) -#define S3C2410_GPE9_SDDAT2 (0x02 << 18) -#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) -#define S3C2443_GPE9_AC_SYNC (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) - -#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10) -#define S3C2410_GPE10_INP (0x00 << 20) -#define S3C2410_GPE10_OUTP (0x01 << 20) -#define S3C2410_GPE10_SDDAT3 (0x02 << 20) -#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2443_GPE10_AC_nRESET (0x03 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) - -#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11) -#define S3C2410_GPE11_INP (0x00 << 22) -#define S3C2410_GPE11_OUTP (0x01 << 22) -#define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) - -#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12) -#define S3C2410_GPE12_INP (0x00 << 24) -#define S3C2410_GPE12_OUTP (0x01 << 24) -#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) - -#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13) -#define S3C2410_GPE13_INP (0x00 << 26) -#define S3C2410_GPE13_OUTP (0x01 << 26) -#define S3C2410_GPE13_SPICLK0 (0x02 << 26) - -#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14) -#define S3C2410_GPE14_INP (0x00 << 28) -#define S3C2410_GPE14_OUTP (0x01 << 28) -#define S3C2410_GPE14_IICSCL (0x02 << 28) -#define S3C2410_GPE14_MASK (0x03 << 28) - -#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15) -#define S3C2410_GPE15_INP (0x00 << 30) -#define S3C2410_GPE15_OUTP (0x01 << 30) -#define S3C2410_GPE15_IICSDA (0x02 << 30) -#define S3C2410_GPE15_MASK (0x03 << 30) - -#define S3C2440_GPE0_ACSYNC (0x03 << 0) -#define S3C2440_GPE1_ACBITCLK (0x03 << 2) -#define S3C2440_GPE2_ACRESET (0x03 << 4) -#define S3C2440_GPE3_ACIN (0x03 << 6) -#define S3C2440_GPE4_ACOUT (0x03 << 8) - -#define S3C2410_GPE_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port F consists of 8 GPIO/Special function - * - * GPIO / interrupt inputs - * - * GPFCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined - * - * pull up works like all other ports. - * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * - * GPIO/serial/misc pins -*/ - -#define S3C2410_GPFCON S3C2410_GPIOREG(0x50) -#define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) -#define S3C2410_GPFUP S3C2410_GPIOREG(0x58) - -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - -#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0) -#define S3C2410_GPF0_INP (0x00 << 0) -#define S3C2410_GPF0_OUTP (0x01 << 0) -#define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - -#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1) -#define S3C2410_GPF1_INP (0x00 << 2) -#define S3C2410_GPF1_OUTP (0x01 << 2) -#define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - -#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2) -#define S3C2410_GPF2_INP (0x00 << 4) -#define S3C2410_GPF2_OUTP (0x01 << 4) -#define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - -#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3) -#define S3C2410_GPF3_INP (0x00 << 6) -#define S3C2410_GPF3_OUTP (0x01 << 6) -#define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - -#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4) -#define S3C2410_GPF4_INP (0x00 << 8) -#define S3C2410_GPF4_OUTP (0x01 << 8) -#define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - -#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5) -#define S3C2410_GPF5_INP (0x00 << 10) -#define S3C2410_GPF5_OUTP (0x01 << 10) -#define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - -#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6) -#define S3C2410_GPF6_INP (0x00 << 12) -#define S3C2410_GPF6_OUTP (0x01 << 12) -#define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - -#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7) -#define S3C2410_GPF7_INP (0x00 << 14) -#define S3C2410_GPF7_OUTP (0x01 << 14) -#define S3C2410_GPF7_EINT7 (0x02 << 14) - -#define S3C2410_GPF_PUPDIS(x) (1<<(x)) - -/* S3C2410: - * Port G consists of 8 GPIO/IRQ/Special function - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function -*/ - -#define S3C2410_GPGCON S3C2410_GPIOREG(0x60) -#define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) -#define S3C2410_GPGUP S3C2410_GPIOREG(0x68) - -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - -#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0) -#define S3C2410_GPG0_INP (0x00 << 0) -#define S3C2410_GPG0_OUTP (0x01 << 0) -#define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) - -#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1) -#define S3C2410_GPG1_INP (0x00 << 2) -#define S3C2410_GPG1_OUTP (0x01 << 2) -#define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) - -#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2) -#define S3C2410_GPG2_INP (0x00 << 4) -#define S3C2410_GPG2_OUTP (0x01 << 4) -#define S3C2410_GPG2_EINT10 (0x02 << 4) -#define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) - -#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) -#define S3C2410_GPG3_INP (0x00 << 6) -#define S3C2410_GPG3_OUTP (0x01 << 6) -#define S3C2410_GPG3_EINT11 (0x02 << 6) -#define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) - -#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4) -#define S3C2410_GPG4_INP (0x00 << 8) -#define S3C2410_GPG4_OUTP (0x01 << 8) -#define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) -#define S3C2410_GPG4_LCDPWREN (0x03 << 8) -#define S3C2443_GPG4_LCDPWRDN (0x03 << 8) - -#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5) -#define S3C2410_GPG5_INP (0x00 << 10) -#define S3C2410_GPG5_OUTP (0x01 << 10) -#define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) -#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ - -#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6) -#define S3C2410_GPG6_INP (0x00 << 12) -#define S3C2410_GPG6_OUTP (0x01 << 12) -#define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) -#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) - -#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7) -#define S3C2410_GPG7_INP (0x00 << 14) -#define S3C2410_GPG7_OUTP (0x01 << 14) -#define S3C2410_GPG7_EINT15 (0x02 << 14) -#define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) - -#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8) -#define S3C2410_GPG8_INP (0x00 << 16) -#define S3C2410_GPG8_OUTP (0x01 << 16) -#define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) - -#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9) -#define S3C2410_GPG9_INP (0x00 << 18) -#define S3C2410_GPG9_OUTP (0x01 << 18) -#define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) - -#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10) -#define S3C2410_GPG10_INP (0x00 << 20) -#define S3C2410_GPG10_OUTP (0x01 << 20) -#define S3C2410_GPG10_EINT18 (0x02 << 20) - -#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11) -#define S3C2410_GPG11_INP (0x00 << 22) -#define S3C2410_GPG11_OUTP (0x01 << 22) -#define S3C2410_GPG11_EINT19 (0x02 << 22) -#define S3C2410_GPG11_TCLK1 (0x03 << 22) -#define S3C2443_GPG11_CF_nIREQ (0x03 << 22) - -#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12) -#define S3C2410_GPG12_INP (0x00 << 24) -#define S3C2410_GPG12_OUTP (0x01 << 24) -#define S3C2410_GPG12_EINT20 (0x02 << 24) -#define S3C2410_GPG12_XMON (0x03 << 24) -#define S3C2442_GPG12_nSPICS0 (0x03 << 24) -#define S3C2443_GPG12_nINPACK (0x03 << 24) - -#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13) -#define S3C2410_GPG13_INP (0x00 << 26) -#define S3C2410_GPG13_OUTP (0x01 << 26) -#define S3C2410_GPG13_EINT21 (0x02 << 26) -#define S3C2410_GPG13_nXPON (0x03 << 26) -#define S3C2443_GPG13_CF_nREG (0x03 << 26) - -#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14) -#define S3C2410_GPG14_INP (0x00 << 28) -#define S3C2410_GPG14_OUTP (0x01 << 28) -#define S3C2410_GPG14_EINT22 (0x02 << 28) -#define S3C2410_GPG14_YMON (0x03 << 28) -#define S3C2443_GPG14_CF_RESET (0x03 << 28) - -#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15) -#define S3C2410_GPG15_INP (0x00 << 30) -#define S3C2410_GPG15_OUTP (0x01 << 30) -#define S3C2410_GPG15_EINT23 (0x02 << 30) -#define S3C2410_GPG15_nYPON (0x03 << 30) -#define S3C2443_GPG15_CF_PWR (0x03 << 30) - -#define S3C2410_GPG_PUPDIS(x) (1<<(x)) - -/* Port H consists of11 GPIO/serial/Misc pins - * - * GPGCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func - * - * pull up works like all other ports. -*/ - -#define S3C2410_GPHCON S3C2410_GPIOREG(0x70) -#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74) -#define S3C2410_GPHUP S3C2410_GPIOREG(0x78) - -#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0) -#define S3C2410_GPH0_INP (0x00 << 0) -#define S3C2410_GPH0_OUTP (0x01 << 0) -#define S3C2410_GPH0_nCTS0 (0x02 << 0) - -#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1) -#define S3C2410_GPH1_INP (0x00 << 2) -#define S3C2410_GPH1_OUTP (0x01 << 2) -#define S3C2410_GPH1_nRTS0 (0x02 << 2) - -#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2) -#define S3C2410_GPH2_INP (0x00 << 4) -#define S3C2410_GPH2_OUTP (0x01 << 4) -#define S3C2410_GPH2_TXD0 (0x02 << 4) - -#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3) -#define S3C2410_GPH3_INP (0x00 << 6) -#define S3C2410_GPH3_OUTP (0x01 << 6) -#define S3C2410_GPH3_RXD0 (0x02 << 6) - -#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4) -#define S3C2410_GPH4_INP (0x00 << 8) -#define S3C2410_GPH4_OUTP (0x01 << 8) -#define S3C2410_GPH4_TXD1 (0x02 << 8) - -#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5) -#define S3C2410_GPH5_INP (0x00 << 10) -#define S3C2410_GPH5_OUTP (0x01 << 10) -#define S3C2410_GPH5_RXD1 (0x02 << 10) - -#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6) -#define S3C2410_GPH6_INP (0x00 << 12) -#define S3C2410_GPH6_OUTP (0x01 << 12) -#define S3C2410_GPH6_TXD2 (0x02 << 12) -#define S3C2410_GPH6_nRTS1 (0x03 << 12) - -#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7) -#define S3C2410_GPH7_INP (0x00 << 14) -#define S3C2410_GPH7_OUTP (0x01 << 14) -#define S3C2410_GPH7_RXD2 (0x02 << 14) -#define S3C2410_GPH7_nCTS1 (0x03 << 14) - -#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8) -#define S3C2410_GPH8_INP (0x00 << 16) -#define S3C2410_GPH8_OUTP (0x01 << 16) -#define S3C2410_GPH8_UCLK (0x02 << 16) - -#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9) -#define S3C2410_GPH9_INP (0x00 << 18) -#define S3C2410_GPH9_OUTP (0x01 << 18) -#define S3C2410_GPH9_CLKOUT0 (0x02 << 18) -#define S3C2442_GPH9_nSPICS0 (0x03 << 18) - -#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10) -#define S3C2410_GPH10_INP (0x00 << 20) -#define S3C2410_GPH10_OUTP (0x01 << 20) -#define S3C2410_GPH10_CLKOUT1 (0x02 << 20) - -/* The S3C2412 and S3C2413 move the GPJ register set to after - * GPH, which means all registers after 0x80 are now offset by 0x10 - * for the 2412/2413 from the 2410/2440/2442 -*/ - -/* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) -#define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) - -/* see clock.h for dclk definitions */ - -/* pullup control on databus */ -#define S3C2410_MISCCR_SPUCR_HEN (0<<0) -#define S3C2410_MISCCR_SPUCR_HDIS (1<<0) -#define S3C2410_MISCCR_SPUCR_LEN (0<<1) -#define S3C2410_MISCCR_SPUCR_LDIS (1<<1) - -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - -#define S3C2410_MISCCR_USBDEV (0<<3) -#define S3C2410_MISCCR_USBHOST (1<<3) - -#define S3C2410_MISCCR_CLK0_MPLL (0<<4) -#define S3C2410_MISCCR_CLK0_UPLL (1<<4) -#define S3C2410_MISCCR_CLK0_FCLK (2<<4) -#define S3C2410_MISCCR_CLK0_HCLK (3<<4) -#define S3C2410_MISCCR_CLK0_PCLK (4<<4) -#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) -#define S3C2410_MISCCR_CLK0_MASK (7<<4) - -#define S3C2412_MISCCR_CLK0_RTC (2<<4) - -#define S3C2410_MISCCR_CLK1_MPLL (0<<8) -#define S3C2410_MISCCR_CLK1_UPLL (1<<8) -#define S3C2410_MISCCR_CLK1_FCLK (2<<8) -#define S3C2410_MISCCR_CLK1_HCLK (3<<8) -#define S3C2410_MISCCR_CLK1_PCLK (4<<8) -#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) -#define S3C2410_MISCCR_CLK1_MASK (7<<8) - -#define S3C2412_MISCCR_CLK1_CLKsrc (0<<8) - -#define S3C2410_MISCCR_USBSUSPND0 (1<<12) -#define S3C2410_MISCCR_USBSUSPND1 (1<<13) - -#define S3C2410_MISCCR_nRSTCON (1<<16) - -#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) -#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) -#define S3C2410_MISCCR_nEN_SCLKE (1<<19) /* not 2412 */ -#define S3C2410_MISCCR_SDSLEEP (7<<17) - -/* external interrupt control... */ -/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7 - * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15 - * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23 - * - * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23 - * - * Samsung datasheet p9-25 -*/ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) -#define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) -#define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) -#define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) - -#define S3C24XX_EXTINT0 S3C24XX_GPIOREG2(0x88) -#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) -#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) - -/* values for S3C2410_EXTINT0/1/2 */ -#define S3C2410_EXTINT_LOWLEV (0x00) -#define S3C2410_EXTINT_HILEV (0x01) -#define S3C2410_EXTINT_FALLEDGE (0x02) -#define S3C2410_EXTINT_RISEEDGE (0x04) -#define S3C2410_EXTINT_BOTHEDGE (0x06) - -/* interrupt filtering conrrol for EINT16..EINT23 */ -#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) -#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) -#define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) -#define S3C2410_EINFLT3 S3C2410_GPIOREG(0xA0) - -#define S3C24XX_EINFLT0 S3C24XX_GPIOREG2(0x94) -#define S3C24XX_EINFLT1 S3C24XX_GPIOREG2(0x98) -#define S3C24XX_EINFLT2 S3C24XX_GPIOREG2(0x9C) -#define S3C24XX_EINFLT3 S3C24XX_GPIOREG2(0xA0) - -/* values for interrupt filtering */ -#define S3C2410_EINTFLT_PCLK (0x00) -#define S3C2410_EINTFLT_EXTCLK (1<<7) -#define S3C2410_EINTFLT_WIDTHMSK(x) ((x) & 0x3f) - -/* removed EINTxxxx defs from here, not meant for this */ - -/* GSTATUS have miscellaneous information in them - * - * These move between s3c2410 and s3c2412 style systems. - */ - -#define S3C2410_GSTATUS0 S3C2410_GPIOREG(0x0AC) -#define S3C2410_GSTATUS1 S3C2410_GPIOREG(0x0B0) -#define S3C2410_GSTATUS2 S3C2410_GPIOREG(0x0B4) -#define S3C2410_GSTATUS3 S3C2410_GPIOREG(0x0B8) -#define S3C2410_GSTATUS4 S3C2410_GPIOREG(0x0BC) - -#define S3C2412_GSTATUS0 S3C2410_GPIOREG(0x0BC) -#define S3C2412_GSTATUS1 S3C2410_GPIOREG(0x0C0) -#define S3C2412_GSTATUS2 S3C2410_GPIOREG(0x0C4) -#define S3C2412_GSTATUS3 S3C2410_GPIOREG(0x0C8) -#define S3C2412_GSTATUS4 S3C2410_GPIOREG(0x0CC) - -#define S3C24XX_GSTATUS0 S3C24XX_GPIOREG2(0x0AC) -#define S3C24XX_GSTATUS1 S3C24XX_GPIOREG2(0x0B0) -#define S3C24XX_GSTATUS2 S3C24XX_GPIOREG2(0x0B4) -#define S3C24XX_GSTATUS3 S3C24XX_GPIOREG2(0x0B8) -#define S3C24XX_GSTATUS4 S3C24XX_GPIOREG2(0x0BC) - -#define S3C2410_GSTATUS0_nWAIT (1<<3) -#define S3C2410_GSTATUS0_NCON (1<<2) -#define S3C2410_GSTATUS0_RnB (1<<1) -#define S3C2410_GSTATUS0_nBATTFLT (1<<0) - -#define S3C2410_GSTATUS1_IDMASK (0xffff0000) -#define S3C2410_GSTATUS1_2410 (0x32410000) -#define S3C2410_GSTATUS1_2412 (0x32412001) -#define S3C2410_GSTATUS1_2440 (0x32440000) -#define S3C2410_GSTATUS1_2442 (0x32440aaa) - -#define S3C2410_GSTATUS2_WTRESET (1<<2) -#define S3C2410_GSTATUS2_OFFRESET (1<<1) -#define S3C2410_GSTATUS2_PONRESET (1<<0) - -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - -/* 2412/2413 sleep configuration registers */ - -#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) -#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C) -#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C) -#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C) -#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C) -#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C) - -/* definitions for each pin bit */ -#define S3C2412_GPIO_SLPCON_LOW ( 0x00 ) -#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 ) -#define S3C2412_GPIO_SLPCON_IN ( 0x02 ) -#define S3C2412_GPIO_SLPCON_PULL ( 0x03 ) - -#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2)) -#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2)) -#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2)) -#define S3C2412_SLPCON_PULL(x) ( 0x03 << ((x) * 2)) -#define S3C2412_SLPCON_EINT(x) ( 0x02 << ((x) * 2)) /* only IRQ pins */ -#define S3C2412_SLPCON_MASK(x) ( 0x03 << ((x) * 2)) - -#define S3C2412_SLPCON_ALL_LOW (0x0) -#define S3C2412_SLPCON_ALL_HIGH (0x11111111 | 0x44444444) -#define S3C2412_SLPCON_ALL_IN (0x22222222 | 0x88888888) -#define S3C2412_SLPCON_ALL_PULL (0x33333333) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h deleted file mode 100644 index 0362332faaf0..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ /dev/null @@ -1,106 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-gpioj.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2440 GPIO J register definitions -*/ - - -#ifndef __ASM_ARCH_REGS_GPIOJ_H -#define __ASM_ARCH_REGS_GPIOJ_H "gpioj" - -/* Port J consists of 13 GPIO/Camera pins - * - * GPJCON has 2 bits for each of the input pins on port F - * 00 = 0 input, 1 output, 2 Camera - * - * pull up works like all other ports. -*/ - -#define S3C2440_GPIO_BANKJ (416) - -#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) - -#define S3C2413_GPJCON S3C2410_GPIOREG(0x80) -#define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) -#define S3C2413_GPJUP S3C2410_GPIOREG(0x88) -#define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) - -#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) -#define S3C2440_GPJ0_INP (0x00 << 0) -#define S3C2440_GPJ0_OUTP (0x01 << 0) -#define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) - -#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) -#define S3C2440_GPJ1_INP (0x00 << 2) -#define S3C2440_GPJ1_OUTP (0x01 << 2) -#define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) - -#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) -#define S3C2440_GPJ2_INP (0x00 << 4) -#define S3C2440_GPJ2_OUTP (0x01 << 4) -#define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) - -#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) -#define S3C2440_GPJ3_INP (0x00 << 6) -#define S3C2440_GPJ3_OUTP (0x01 << 6) -#define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) - -#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) -#define S3C2440_GPJ4_INP (0x00 << 8) -#define S3C2440_GPJ4_OUTP (0x01 << 8) -#define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) - -#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) -#define S3C2440_GPJ5_INP (0x00 << 10) -#define S3C2440_GPJ5_OUTP (0x01 << 10) -#define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) - -#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) -#define S3C2440_GPJ6_INP (0x00 << 12) -#define S3C2440_GPJ6_OUTP (0x01 << 12) -#define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) - -#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) -#define S3C2440_GPJ7_INP (0x00 << 14) -#define S3C2440_GPJ7_OUTP (0x01 << 14) -#define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) - -#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) -#define S3C2440_GPJ8_INP (0x00 << 16) -#define S3C2440_GPJ8_OUTP (0x01 << 16) -#define S3C2440_GPJ8_CAMPCLK (0x02 << 16) - -#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) -#define S3C2440_GPJ9_INP (0x00 << 18) -#define S3C2440_GPJ9_OUTP (0x01 << 18) -#define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) - -#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) -#define S3C2440_GPJ10_INP (0x00 << 20) -#define S3C2440_GPJ10_OUTP (0x01 << 20) -#define S3C2440_GPJ10_CAMHREF (0x02 << 20) - -#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) -#define S3C2440_GPJ11_INP (0x00 << 22) -#define S3C2440_GPJ11_OUTP (0x01 << 22) -#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) - -#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) -#define S3C2440_GPJ12_INP (0x00 << 24) -#define S3C2440_GPJ12_OUTP (0x01 << 24) -#define S3C2440_GPJ12_CAMRESET (0x02 << 24) - -#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) -#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) -#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) - -#endif /* __ASM_ARCH_REGS_GPIOJ_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-irq.h b/include/asm-arm/arch-s3c2410/regs-irq.h deleted file mode 100644 index 498184cb8adc..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-irq.h +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-irq.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $" - -/* interrupt controller */ - -#define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) -#define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) -#define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) - -#define S3C2410_SRCPND S3C2410_IRQREG(0x000) -#define S3C2410_INTMOD S3C2410_IRQREG(0x004) -#define S3C2410_INTMSK S3C2410_IRQREG(0x008) -#define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) -#define S3C2410_INTPND S3C2410_IRQREG(0x010) -#define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) -#define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) -#define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) - -/* mask: 0=enable, 1=disable - * 1 bit EINT, 4=EINT4, 23=EINT23 - * EINT0,1,2,3 are not handled here. -*/ - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) -#define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) -#define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) - -#endif /* ___ASM_ARCH_REGS_IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h deleted file mode 100644 index bd854845697f..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-lcd.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_REGS_LCD_H -#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" - -#define S3C2410_LCDREG(x) (x) - -/* LCD control registers */ -#define S3C2410_LCDCON1 S3C2410_LCDREG(0x00) -#define S3C2410_LCDCON2 S3C2410_LCDREG(0x04) -#define S3C2410_LCDCON3 S3C2410_LCDREG(0x08) -#define S3C2410_LCDCON4 S3C2410_LCDREG(0x0C) -#define S3C2410_LCDCON5 S3C2410_LCDREG(0x10) - -#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8) -#define S3C2410_LCDCON1_MMODE (1<<7) -#define S3C2410_LCDCON1_DSCAN4 (0<<5) -#define S3C2410_LCDCON1_STN4 (1<<5) -#define S3C2410_LCDCON1_STN8 (2<<5) -#define S3C2410_LCDCON1_TFT (3<<5) - -#define S3C2410_LCDCON1_STN1BPP (0<<1) -#define S3C2410_LCDCON1_STN2GREY (1<<1) -#define S3C2410_LCDCON1_STN4GREY (2<<1) -#define S3C2410_LCDCON1_STN8BPP (3<<1) -#define S3C2410_LCDCON1_STN12BPP (4<<1) - -#define S3C2410_LCDCON1_TFT1BPP (8<<1) -#define S3C2410_LCDCON1_TFT2BPP (9<<1) -#define S3C2410_LCDCON1_TFT4BPP (10<<1) -#define S3C2410_LCDCON1_TFT8BPP (11<<1) -#define S3C2410_LCDCON1_TFT16BPP (12<<1) -#define S3C2410_LCDCON1_TFT24BPP (13<<1) - -#define S3C2410_LCDCON1_ENVID (1) - -#define S3C2410_LCDCON1_MODEMASK 0x1E - -#define S3C2410_LCDCON2_VBPD(x) ((x) << 24) -#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) -#define S3C2410_LCDCON2_VFPD(x) ((x) << 6) -#define S3C2410_LCDCON2_VSPW(x) ((x) << 0) - -#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) -#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) -#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) - -#define S3C2410_LCDCON3_HBPD(x) ((x) << 19) -#define S3C2410_LCDCON3_WDLY(x) ((x) << 19) -#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) -#define S3C2410_LCDCON3_HFPD(x) ((x) << 0) -#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) - -#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) -#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) - -/* LDCCON4 changes for STN mode on the S3C2412 */ - -#define S3C2410_LCDCON4_MVAL(x) ((x) << 8) -#define S3C2410_LCDCON4_HSPW(x) ((x) << 0) -#define S3C2410_LCDCON4_WLH(x) ((x) << 0) - -#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) - -#define S3C2410_LCDCON5_BPP24BL (1<<12) -#define S3C2410_LCDCON5_FRM565 (1<<11) -#define S3C2410_LCDCON5_INVVCLK (1<<10) -#define S3C2410_LCDCON5_INVVLINE (1<<9) -#define S3C2410_LCDCON5_INVVFRAME (1<<8) -#define S3C2410_LCDCON5_INVVD (1<<7) -#define S3C2410_LCDCON5_INVVDEN (1<<6) -#define S3C2410_LCDCON5_INVPWREN (1<<5) -#define S3C2410_LCDCON5_INVLEND (1<<4) -#define S3C2410_LCDCON5_PWREN (1<<3) -#define S3C2410_LCDCON5_ENLEND (1<<2) -#define S3C2410_LCDCON5_BSWP (1<<1) -#define S3C2410_LCDCON5_HWSWP (1<<0) - -/* framebuffer start addressed */ -#define S3C2410_LCDSADDR1 S3C2410_LCDREG(0x14) -#define S3C2410_LCDSADDR2 S3C2410_LCDREG(0x18) -#define S3C2410_LCDSADDR3 S3C2410_LCDREG(0x1C) - -#define S3C2410_LCDBANK(x) ((x) << 21) -#define S3C2410_LCDBASEU(x) (x) - -#define S3C2410_OFFSIZE(x) ((x) << 11) -#define S3C2410_PAGEWIDTH(x) (x) - -/* colour lookup and miscellaneous controls */ - -#define S3C2410_REDLUT S3C2410_LCDREG(0x20) -#define S3C2410_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2410_BLUELUT S3C2410_LCDREG(0x28) - -#define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) -#define S3C2410_TPAL S3C2410_LCDREG(0x50) - -#define S3C2410_TPAL_EN (1<<24) - -/* interrupt info */ -#define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) -#define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) -#define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) -#define S3C2410_LCDINT_FIWSEL (1<<2) -#define S3C2410_LCDINT_FRSYNC (1<<1) -#define S3C2410_LCDINT_FICNT (1<<0) - -/* s3c2442 extra stn registers */ - -#define S3C2442_REDLUT S3C2410_LCDREG(0x20) -#define S3C2442_GREENLUT S3C2410_LCDREG(0x24) -#define S3C2442_BLUELUT S3C2410_LCDREG(0x28) -#define S3C2442_DITHMODE S3C2410_LCDREG(0x20) - -#define S3C2410_LPCSEL S3C2410_LCDREG(0x60) - -#define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4)) - -/* S3C2412 registers */ - -#define S3C2412_TPAL S3C2410_LCDREG(0x20) - -#define S3C2412_LCDINTPND S3C2410_LCDREG(0x24) -#define S3C2412_LCDSRCPND S3C2410_LCDREG(0x28) -#define S3C2412_LCDINTMSK S3C2410_LCDREG(0x2C) - -#define S3C2412_TCONSEL S3C2410_LCDREG(0x30) - -#define S3C2412_LCDCON6 S3C2410_LCDREG(0x34) -#define S3C2412_LCDCON7 S3C2410_LCDREG(0x38) -#define S3C2412_LCDCON8 S3C2410_LCDREG(0x3C) -#define S3C2412_LCDCON9 S3C2410_LCDREG(0x40) - -#define S3C2412_REDLUT(x) S3C2410_LCDREG(0x44 + ((x)*4)) -#define S3C2412_GREENLUT(x) S3C2410_LCDREG(0x60 + ((x)*4)) -#define S3C2412_BLUELUT(x) S3C2410_LCDREG(0x98 + ((x)*4)) - -#define S3C2412_FRCPAT(x) S3C2410_LCDREG(0xB4 + ((x)*4)) - -/* general registers */ - -/* base of the LCD registers, where INTPND, INTSRC and then INTMSK - * are available. */ - -#define S3C2410_LCDINTBASE S3C2410_LCDREG(0x54) -#define S3C2412_LCDINTBASE S3C2410_LCDREG(0x24) - -#define S3C24XX_LCDINTPND (0x00) -#define S3C24XX_LCDSRCPND (0x04) -#define S3C24XX_LCDINTMSK (0x08) - -#endif /* ___ASM_ARCH_REGS_LCD_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h deleted file mode 100644 index 312ff93b63c6..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ /dev/null @@ -1,220 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-mem.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Memory Control register definitions -*/ - -#ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $" - -#ifndef S3C2410_MEMREG -#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -/* bus width, and wait state control */ -#define S3C2410_BWSCON S3C2410_MEMREG(0x0000) - -/* bank zero config - note, pinstrapped from OM pins! */ -#define S3C2410_BWSCON_DW0_16 (1<<1) -#define S3C2410_BWSCON_DW0_32 (2<<1) - -/* bank one configs */ -#define S3C2410_BWSCON_DW1_8 (0<<4) -#define S3C2410_BWSCON_DW1_16 (1<<4) -#define S3C2410_BWSCON_DW1_32 (2<<4) -#define S3C2410_BWSCON_WS1 (1<<6) -#define S3C2410_BWSCON_ST1 (1<<7) - -/* bank 2 configurations */ -#define S3C2410_BWSCON_DW2_8 (0<<8) -#define S3C2410_BWSCON_DW2_16 (1<<8) -#define S3C2410_BWSCON_DW2_32 (2<<8) -#define S3C2410_BWSCON_WS2 (1<<10) -#define S3C2410_BWSCON_ST2 (1<<11) - -/* bank 3 configurations */ -#define S3C2410_BWSCON_DW3_8 (0<<12) -#define S3C2410_BWSCON_DW3_16 (1<<12) -#define S3C2410_BWSCON_DW3_32 (2<<12) -#define S3C2410_BWSCON_WS3 (1<<14) -#define S3C2410_BWSCON_ST3 (1<<15) - -/* bank 4 configurations */ -#define S3C2410_BWSCON_DW4_8 (0<<16) -#define S3C2410_BWSCON_DW4_16 (1<<16) -#define S3C2410_BWSCON_DW4_32 (2<<16) -#define S3C2410_BWSCON_WS4 (1<<18) -#define S3C2410_BWSCON_ST4 (1<<19) - -/* bank 5 configurations */ -#define S3C2410_BWSCON_DW5_8 (0<<20) -#define S3C2410_BWSCON_DW5_16 (1<<20) -#define S3C2410_BWSCON_DW5_32 (2<<20) -#define S3C2410_BWSCON_WS5 (1<<22) -#define S3C2410_BWSCON_ST5 (1<<23) - -/* bank 6 configurations */ -#define S3C2410_BWSCON_DW6_8 (0<<24) -#define S3C2410_BWSCON_DW6_16 (1<<24) -#define S3C2410_BWSCON_DW6_32 (2<<24) -#define S3C2410_BWSCON_WS6 (1<<26) -#define S3C2410_BWSCON_ST6 (1<<27) - -/* bank 7 configurations */ -#define S3C2410_BWSCON_DW7_8 (0<<28) -#define S3C2410_BWSCON_DW7_16 (1<<28) -#define S3C2410_BWSCON_DW7_32 (2<<28) -#define S3C2410_BWSCON_WS7 (1<<30) -#define S3C2410_BWSCON_ST7 (1<<31) - -/* memory set (rom, ram) */ -#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004) -#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008) -#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C) -#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010) -#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014) -#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018) -#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C) -#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020) - -/* bank configuration registers */ - -#define S3C2410_BANKCON_PMCnorm (0x00) -#define S3C2410_BANKCON_PMC4 (0x01) -#define S3C2410_BANKCON_PMC8 (0x02) -#define S3C2410_BANKCON_PMC16 (0x03) - -/* bank configurations for banks 0..7, note banks - * 6 and 7 have differnt configurations depending on - * the memory type bits */ - -#define S3C2410_BANKCON_Tacp2 (0x0 << 2) -#define S3C2410_BANKCON_Tacp3 (0x1 << 2) -#define S3C2410_BANKCON_Tacp4 (0x2 << 2) -#define S3C2410_BANKCON_Tacp6 (0x3 << 2) -#define S3C2410_BANKCON_Tacp_SHIFT (2) - -#define S3C2410_BANKCON_Tcah0 (0x0 << 4) -#define S3C2410_BANKCON_Tcah1 (0x1 << 4) -#define S3C2410_BANKCON_Tcah2 (0x2 << 4) -#define S3C2410_BANKCON_Tcah4 (0x3 << 4) -#define S3C2410_BANKCON_Tcah_SHIFT (4) - -#define S3C2410_BANKCON_Tcoh0 (0x0 << 6) -#define S3C2410_BANKCON_Tcoh1 (0x1 << 6) -#define S3C2410_BANKCON_Tcoh2 (0x2 << 6) -#define S3C2410_BANKCON_Tcoh4 (0x3 << 6) -#define S3C2410_BANKCON_Tcoh_SHIFT (6) - -#define S3C2410_BANKCON_Tacc1 (0x0 << 8) -#define S3C2410_BANKCON_Tacc2 (0x1 << 8) -#define S3C2410_BANKCON_Tacc3 (0x2 << 8) -#define S3C2410_BANKCON_Tacc4 (0x3 << 8) -#define S3C2410_BANKCON_Tacc6 (0x4 << 8) -#define S3C2410_BANKCON_Tacc8 (0x5 << 8) -#define S3C2410_BANKCON_Tacc10 (0x6 << 8) -#define S3C2410_BANKCON_Tacc14 (0x7 << 8) -#define S3C2410_BANKCON_Tacc_SHIFT (8) - -#define S3C2410_BANKCON_Tcos0 (0x0 << 11) -#define S3C2410_BANKCON_Tcos1 (0x1 << 11) -#define S3C2410_BANKCON_Tcos2 (0x2 << 11) -#define S3C2410_BANKCON_Tcos4 (0x3 << 11) -#define S3C2410_BANKCON_Tcos_SHIFT (11) - -#define S3C2410_BANKCON_Tacs0 (0x0 << 13) -#define S3C2410_BANKCON_Tacs1 (0x1 << 13) -#define S3C2410_BANKCON_Tacs2 (0x2 << 13) -#define S3C2410_BANKCON_Tacs4 (0x3 << 13) -#define S3C2410_BANKCON_Tacs_SHIFT (13) - -#define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) -#define S3C2410_BANKCON_SDRAM (0x3 << 15) - -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - -/* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trcd2 (0x00 << 2) -#define S3C2410_BANKCON_Trcd3 (0x01 << 2) -#define S3C2410_BANKCON_Trcd4 (0x02 << 2) - -/* control column address select */ -#define S3C2410_BANKCON_SCANb8 (0x00 << 0) -#define S3C2410_BANKCON_SCANb9 (0x01 << 0) -#define S3C2410_BANKCON_SCANb10 (0x02 << 0) - -#define S3C2410_REFRESH S3C2410_MEMREG(0x0024) -#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028) -#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C) -#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030) - -/* refresh control */ - -#define S3C2410_REFRESH_REFEN (1<<23) -#define S3C2410_REFRESH_SELF (1<<22) -#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1) - -#define S3C2410_REFRESH_TRP_MASK (3<<20) -#define S3C2410_REFRESH_TRP_2clk (0<<20) -#define S3C2410_REFRESH_TRP_3clk (1<<20) -#define S3C2410_REFRESH_TRP_4clk (2<<20) - -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - -#define S3C2410_REFRESH_TSRC_MASK (3<<18) -#define S3C2410_REFRESH_TSRC_4clk (0<<18) -#define S3C2410_REFRESH_TSRC_5clk (1<<18) -#define S3C2410_REFRESH_TSRC_6clk (2<<18) -#define S3C2410_REFRESH_TSRC_7clk (3<<18) - - -/* mode select register(s) */ - -#define S3C2410_MRSRB_CL1 (0x00 << 4) -#define S3C2410_MRSRB_CL2 (0x02 << 4) -#define S3C2410_MRSRB_CL3 (0x03 << 4) - -/* bank size register */ -#define S3C2410_BANKSIZE_128M (0x2 << 0) -#define S3C2410_BANKSIZE_64M (0x1 << 0) -#define S3C2410_BANKSIZE_32M (0x0 << 0) -#define S3C2410_BANKSIZE_16M (0x7 << 0) -#define S3C2410_BANKSIZE_8M (0x6 << 0) -#define S3C2410_BANKSIZE_4M (0x5 << 0) -#define S3C2410_BANKSIZE_2M (0x4 << 0) -#define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) -#define S3C2410_BANKSIZE_SCLK_EN (1<<4) -#define S3C2410_BANKSIZE_SCKE_EN (1<<5) -#define S3C2410_BANKSIZE_BURST (1<<7) - -#endif /* __ASM_ARM_MEMREGS_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h deleted file mode 100644 index 13d13b7cfe98..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-power.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-power.h - * - * Copyright (c) 2003,2004,2005,2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX power control register definitions -*/ - -#ifndef __ASM_ARM_REGS_PWR -#define __ASM_ARM_REGS_PWR __FILE__ - -#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2412_PWRMODECON S3C24XX_PWRREG(0x20) -#define S3C2412_PWRCFG S3C24XX_PWRREG(0x24) - -#define S3C2412_INFORM0 S3C24XX_PWRREG(0x70) -#define S3C2412_INFORM1 S3C24XX_PWRREG(0x74) -#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78) -#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C) - -#define S3C2412_PWRCFG_BATF_IRQ (1<<0) -#define S3C2412_PWRCFG_BATF_IGNORE (2<<0) -#define S3C2412_PWRCFG_BATF_SLEEP (3<<0) -#define S3C2412_PWRCFG_BATF_MASK (3<<0) - -#define S3C2412_PWRCFG_STANDBYWFI_IGNORE (0<<6) -#define S3C2412_PWRCFG_STANDBYWFI_IDLE (1<<6) -#define S3C2412_PWRCFG_STANDBYWFI_STOP (2<<6) -#define S3C2412_PWRCFG_STANDBYWFI_SLEEP (3<<6) -#define S3C2412_PWRCFG_STANDBYWFI_MASK (3<<6) - -#define S3C2412_PWRCFG_RTC_MASKIRQ (1<<8) -#define S3C2412_PWRCFG_NAND_NORST (1<<9) - -#endif /* __ASM_ARM_REGS_PWR */ diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h deleted file mode 100644 index c8c793e78936..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 memory register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2412_MEM -#define __ASM_ARM_REGS_S3C2412_MEM - -#ifndef S3C2412_MEMREG -#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) -#endif - -#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) -#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) -#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) -#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) - -#define S3C2412_REFRESH S3C2412_MEMREG(0x10) -#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) - -#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h deleted file mode 100644 index 783b18f5bcea..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2412.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 specific register definitions -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_H -#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" - -#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) -#define S3C2412_SWRST_RESET (0x533C2412) - -/* see regs-power.h for the other registers in the power block. */ - -#endif /* __ASM_ARCH_REGS_S3C2412_H */ - diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h deleted file mode 100644 index c1414658d1c5..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h +++ /dev/null @@ -1,195 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2443 clock register definitions -*/ - -#ifndef __ASM_ARM_REGS_S3C2443_CLOCK -#define __ASM_ARM_REGS_S3C2443_CLOCK - -#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) - -#define S3C2443_PLLCON_MDIVSHIFT 16 -#define S3C2443_PLLCON_PDIVSHIFT 8 -#define S3C2443_PLLCON_SDIVSHIFT 0 -#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1) -#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1) -#define S3C2443_PLLCON_SDIVMASK (3) - -#define S3C2443_MPLLCON S3C2443_CLKREG(0x10) -#define S3C2443_EPLLCON S3C2443_CLKREG(0x18) -#define S3C2443_CLKSRC S3C2443_CLKREG(0x20) -#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24) -#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28) -#define S3C2443_HCLKCON S3C2443_CLKREG(0x30) -#define S3C2443_PCLKCON S3C2443_CLKREG(0x34) -#define S3C2443_SCLKCON S3C2443_CLKREG(0x38) -#define S3C2443_PWRMODE S3C2443_CLKREG(0x40) -#define S3C2443_SWRST S3C2443_CLKREG(0x44) -#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50) -#define S3C2443_SYSID S3C2443_CLKREG(0x5C) -#define S3C2443_PWRCFG S3C2443_CLKREG(0x60) -#define S3C2443_RSTCON S3C2443_CLKREG(0x64) - -#define S3C2443_SWRST_RESET (0x533c2443) - -#define S3C2443_PLLCON_OFF (1<<24) - -#define S3C2443_CLKSRC_I2S_EXT (1<<14) -#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14) -#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) -#define S3C2443_CLKSRC_I2S_MASK (3<<14) - -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) - -#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) -#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) -#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3) - -#define S3C2443_CLKDIV0_DVS (1<<13) -#define S3C2443_CLKDIV0_HALF_HCLK (1<<3) -#define S3C2443_CLKDIV0_HALF_PCLK (1<<2) - -#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0) - -#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6) -#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6) - -#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4) -#define S3C2443_CLKDIV0_PREDIV_SHIFT (4) - -#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9) -#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9) -#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9) -#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9) -#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9) -#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9) -#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9) -#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9) -#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9) -#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9) - -/* S3C2443_CLKDIV1 */ - -#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26) -#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26) - -#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24) -#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24) - -#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16) -#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16) - -#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12) -#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12) - -#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8) -#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8) - -#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6) -#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6) - -#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4) -#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4) - -#define S3C2443_CLKCON_NAND - -#define S3C2443_HCLKCON_DMA0 (1<<0) -#define S3C2443_HCLKCON_DMA1 (1<<1) -#define S3C2443_HCLKCON_DMA2 (1<<2) -#define S3C2443_HCLKCON_DMA3 (1<<3) -#define S3C2443_HCLKCON_DMA4 (1<<4) -#define S3C2443_HCLKCON_DMA5 (1<<5) -#define S3C2443_HCLKCON_CAMIF (1<<8) -#define S3C2443_HCLKCON_DISP (1<<9) -#define S3C2443_HCLKCON_LCDC (1<<10) -#define S3C2443_HCLKCON_USBH (1<<11) -#define S3C2443_HCLKCON_USBD (1<<12) -#define S3C2443_HCLKCON_HSMMC (1<<16) -#define S3C2443_HCLKCON_CFC (1<<17) -#define S3C2443_HCLKCON_SSMC (1<<18) -#define S3C2443_HCLKCON_DRAMC (1<<19) - -#define S3C2443_PCLKCON_UART0 (1<<0) -#define S3C2443_PCLKCON_UART1 (1<<1) -#define S3C2443_PCLKCON_UART2 (1<<2) -#define S3C2443_PCLKCON_UART3 (1<<3) -#define S3C2443_PCLKCON_IIC (1<<4) -#define S3C2443_PCLKCON_SDI (1<<5) -#define S3C2443_PCLKCON_ADC (1<<7) -#define S3C2443_PCLKCON_AC97 (1<<8) -#define S3C2443_PCLKCON_IIS (1<<9) -#define S3C2443_PCLKCON_PWMT (1<<10) -#define S3C2443_PCLKCON_WDT (1<<11) -#define S3C2443_PCLKCON_RTC (1<<12) -#define S3C2443_PCLKCON_GPIO (1<<13) -#define S3C2443_PCLKCON_SPI0 (1<<14) -#define S3C2443_PCLKCON_SPI1 (1<<15) - -#define S3C2443_SCLKCON_DDRCLK (1<<16) -#define S3C2443_SCLKCON_SSMCCLK (1<<15) -#define S3C2443_SCLKCON_HSSPICLK (1<<14) -#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13) -#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12) -#define S3C2443_SCLKCON_CAMCLK (1<<11) -#define S3C2443_SCLKCON_DISPCLK (1<<10) -#define S3C2443_SCLKCON_I2SCLK (1<<9) -#define S3C2443_SCLKCON_UARTCLK (1<<8) -#define S3C2443_SCLKCON_USBHOST (1<<1) - -#include - -static inline unsigned int -s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (2 * (mdiv + 8)); - do_div(fvco, pdiv << sdiv); - - return (unsigned int)fvco; -} - -static inline unsigned int -s3c2443_get_epll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT; - - mdiv &= S3C2443_PLLCON_MDIVMASK; - pdiv &= S3C2443_PLLCON_PDIVMASK; - sdiv &= S3C2443_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */ - diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h deleted file mode 100644 index bfb222fa4abb..000000000000 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ /dev/null @@ -1,127 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-sdi.h - * - * Copyright (c) 2004 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 MMC/SDIO register definitions -*/ - -#ifndef __ASM_ARM_REGS_SDI -#define __ASM_ARM_REGS_SDI "regs-sdi.h" - -#define S3C2410_SDICON (0x00) -#define S3C2410_SDIPRE (0x04) -#define S3C2410_SDICMDARG (0x08) -#define S3C2410_SDICMDCON (0x0C) -#define S3C2410_SDICMDSTAT (0x10) -#define S3C2410_SDIRSP0 (0x14) -#define S3C2410_SDIRSP1 (0x18) -#define S3C2410_SDIRSP2 (0x1C) -#define S3C2410_SDIRSP3 (0x20) -#define S3C2410_SDITIMER (0x24) -#define S3C2410_SDIBSIZE (0x28) -#define S3C2410_SDIDCON (0x2C) -#define S3C2410_SDIDCNT (0x30) -#define S3C2410_SDIDSTA (0x34) -#define S3C2410_SDIFSTA (0x38) - -#define S3C2410_SDIDATA (0x3C) -#define S3C2410_SDIIMSK (0x40) - -#define S3C2440_SDIDATA (0x40) -#define S3C2440_SDIIMSK (0x3C) - -#define S3C2440_SDICON_SDRESET (1<<8) -#define S3C2440_SDICON_MMCCLOCK (1<<5) -#define S3C2410_SDICON_BYTEORDER (1<<4) -#define S3C2410_SDICON_SDIOIRQ (1<<3) -#define S3C2410_SDICON_RWAITEN (1<<2) -#define S3C2410_SDICON_FIFORESET (1<<1) -#define S3C2410_SDICON_CLOCKTYPE (1<<0) - -#define S3C2410_SDICMDCON_ABORT (1<<12) -#define S3C2410_SDICMDCON_WITHDATA (1<<11) -#define S3C2410_SDICMDCON_LONGRSP (1<<10) -#define S3C2410_SDICMDCON_WAITRSP (1<<9) -#define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_SENDERHOST (1<<6) -#define S3C2410_SDICMDCON_INDEX (0x3f) - -#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) -#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) -#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) -#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) -#define S3C2410_SDICMDSTAT_XFERING (1<<8) -#define S3C2410_SDICMDSTAT_INDEX (0xff) - -#define S3C2440_SDIDCON_DS_BYTE (0<<22) -#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) -#define S3C2440_SDIDCON_DS_WORD (2<<22) -#define S3C2410_SDIDCON_IRQPERIOD (1<<21) -#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) -#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) -#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) -#define S3C2410_SDIDCON_BLOCKMODE (1<<17) -#define S3C2410_SDIDCON_WIDEBUS (1<<16) -#define S3C2410_SDIDCON_DMAEN (1<<15) -#define S3C2410_SDIDCON_STOP (1<<14) -#define S3C2440_SDIDCON_DATSTART (1<<14) -#define S3C2410_SDIDCON_DATMODE (3<<12) -#define S3C2410_SDIDCON_BLKNUM (0x7ff) - -/* constants for S3C2410_SDIDCON_DATMODE */ -#define S3C2410_SDIDCON_XFER_READY (0<<12) -#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) -#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) -#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) - -#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) -#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) - -#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) -#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) -#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ -#define S3C2410_SDIDSTA_CRCFAIL (1<<7) -#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) -#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) -#define S3C2410_SDIDSTA_XFERFINISH (1<<4) -#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) -#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ -#define S3C2410_SDIDSTA_TXDATAON (1<<1) -#define S3C2410_SDIDSTA_RXDATAON (1<<0) - -#define S3C2440_SDIFSTA_FIFORESET (1<<16) -#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ -#define S3C2410_SDIFSTA_TFDET (1<<13) -#define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TFHALF (1<<11) -#define S3C2410_SDIFSTA_TFEMPTY (1<<10) -#define S3C2410_SDIFSTA_RFLAST (1<<9) -#define S3C2410_SDIFSTA_RFFULL (1<<8) -#define S3C2410_SDIFSTA_RFHALF (1<<7) -#define S3C2410_SDIFSTA_COUNTMASK (0x7f) - -#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) -#define S3C2410_SDIIMSK_CMDSENT (1<<16) -#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) -#define S3C2410_SDIIMSK_RESPONSEND (1<<14) -#define S3C2410_SDIIMSK_READWAIT (1<<13) -#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) -#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) -#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) -#define S3C2410_SDIIMSK_DATACRC (1<<9) -#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) -#define S3C2410_SDIIMSK_DATAFINISH (1<<7) -#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) -#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ -#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) -#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) -#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) -#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) -#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) - -#endif /* __ASM_ARM_REGS_SDI */ diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h deleted file mode 100644 index 4f866cdecab0..000000000000 --- a/include/asm-arm/arch-s3c2410/reset.h +++ /dev/null @@ -1,22 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/reset.h - * - * Copyright (c) 2007 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 CPU reset controls -*/ - -#ifndef __ASM_ARCH_RESET_H -#define __ASM_ARCH_RESET_H __FILE__ - -/* This allows the over-ride of the default reset code -*/ - -extern void (*s3c24xx_reset_hook)(void); - -#endif /* __ASM_ARCH_RESET_H */ diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h deleted file mode 100644 index 73803731142a..000000000000 --- a/include/asm-arm/arch-s3c2410/spi-gpio.h +++ /dev/null @@ -1,27 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 - SPI Controller platfrom_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h deleted file mode 100644 index 442169887d3b..000000000000 --- a/include/asm-arm/arch-s3c2410/spi.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/spi.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPI_H -#define __ASM_ARCH_SPI_H __FILE__ - -struct s3c2410_spi_info { - unsigned long pin_cs; /* simple gpio cs */ - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - - void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); -}; - - -#endif /* __ASM_ARCH_SPI_H */ diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h deleted file mode 100644 index beeec770dcf7..000000000000 --- a/include/asm-arm/arch-s3c2410/system-reset.h +++ /dev/null @@ -1,64 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/system-reset.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks - * - * S3C2410 - System define for arch_reset() function - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include - -#include -#include - -extern void (*s3c24xx_reset_hook)(void); - -static void -arch_reset(char mode) -{ - struct clk *wdtclk; - - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h deleted file mode 100644 index 98f690e7d33e..000000000000 --- a/include/asm-arm/arch-s3c2410/system.h +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/system.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * S3C2410 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include - -#include -#include -#include - -#include - -void (*s3c24xx_idle)(void); -void (*s3c24xx_reset_hook)(void); - -void s3c24xx_default_idle(void) -{ - unsigned long tmp; - int i; - - /* idle the system by using the idle mode which will wait for an - * interrupt to happen before restarting the system. - */ - - /* Warning: going into idle state upsets jtag scanning */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); - - /* the samsung port seems to do a loop and then unset idle.. */ - for (i = 0; i < 50; i++) { - tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */ - } - - /* this bit is not cleared on re-start... */ - - __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE, - S3C2410_CLKCON); -} - -static void arch_idle(void) -{ - if (s3c24xx_idle != NULL) - (s3c24xx_idle)(); - else - s3c24xx_default_idle(); -} - -#include diff --git a/include/asm-arm/arch-s3c2410/timex.h b/include/asm-arm/arch-s3c2410/timex.h deleted file mode 100644 index c16a99c5a59a..000000000000 --- a/include/asm-arm/arch-s3c2410/timex.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - - -#define CLOCK_TICK_RATE 12000000 - - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h deleted file mode 100644 index 48a5731ee988..000000000000 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/uncompress.h - * - * Copyright (c) 2003, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C2410 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -/* working in physical space... */ -#undef S3C2410_GPIOREG -#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x))) - -#include - -static inline int is_arm926(void) -{ - unsigned int cpuid; - - asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid)); - - return ((cpuid & 0xff0) == 0x260); -} - -static void arch_detect_cpu(void) -{ - unsigned int cpuid; - - cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1); - cpuid &= S3C2410_GSTATUS1_IDMASK; - - if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 || - cpuid == S3C2410_GSTATUS1_2442) { - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; - } else { - fifo_mask = S3C2410_UFSTAT_TXMASK; - fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT; - } -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-s3c2410/usb-control.h b/include/asm-arm/arch-s3c2410/usb-control.h deleted file mode 100644 index 5bfa376e33dc..000000000000 --- a/include/asm-arm/arch-s3c2410/usb-control.h +++ /dev/null @@ -1,41 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/usb-control.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks - * - * S3C2410 - usb port information - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_USBCONTROL_H -#define __ASM_ARCH_USBCONTROL_H "include/asm-arm/arch-s3c2410/usb-control.h" - -#define S3C_HCDFLG_USED (1) - -struct s3c2410_hcd_port { - unsigned char flags; - unsigned char power; - unsigned char oc_status; - unsigned char oc_changed; -}; - -struct s3c2410_hcd_info { - struct usb_hcd *hcd; - struct s3c2410_hcd_port port[2]; - - void (*power_control)(int port, int to); - void (*enable_oc)(struct s3c2410_hcd_info *, int on); - void (*report_oc)(struct s3c2410_hcd_info *, int ports); -}; - -static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) -{ - if (info->report_oc != NULL) { - (info->report_oc)(info, ports); - } -} - -#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/include/asm-arm/arch-s3c2410/vmalloc.h b/include/asm-arm/arch-s3c2410/vmalloc.h deleted file mode 100644 index 0ae3bdb7e03b..000000000000 --- a/include/asm-arm/arch-s3c2410/vmalloc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vmalloc.h - * - * from linux/include/asm-arm/arch-iop3xx/vmalloc.h - * - * Copyright (c) 2003 Simtec Electronics - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END (0xE0000000) - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-cpld.h b/include/asm-arm/arch-s3c2410/vr1000-cpld.h deleted file mode 100644 index 0557b0a5ab1d..000000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-cpld.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-cpld.h - * - * Copyright (c) 2003 Simtec Electronics - * Ben Dooks - * - * VR1000 - CPLD control constants - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000CPLD_H -#define __ASM_ARCH_VR1000CPLD_H - -#define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ - -#endif /* __ASM_ARCH_VR1000CPLD_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-irq.h b/include/asm-arm/arch-s3c2410/vr1000-irq.h deleted file mode 100644 index 890937083c61..000000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-irq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-irq.h - * - * Copyright (c) 2003,2004 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - IRQ Number definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_VR1000IRQ_H -#define __ASM_ARCH_VR1000IRQ_H - -/* irq numbers to onboard peripherals */ - -#define IRQ_USBOC IRQ_EINT19 -#define IRQ_IDE0 IRQ_EINT16 -#define IRQ_IDE1 IRQ_EINT17 -#define IRQ_VR1000_SERIAL IRQ_EINT12 -#define IRQ_VR1000_DM9000A IRQ_EINT10 -#define IRQ_VR1000_DM9000N IRQ_EINT9 -#define IRQ_SMALERT IRQ_EINT8 - -#endif /* __ASM_ARCH_VR1000IRQ_H */ diff --git a/include/asm-arm/arch-s3c2410/vr1000-map.h b/include/asm-arm/arch-s3c2410/vr1000-map.h deleted file mode 100644 index 92a56a724a8c..000000000000 --- a/include/asm-arm/arch-s3c2410/vr1000-map.h +++ /dev/null @@ -1,110 +0,0 @@ -/* linux/include/asm-arm/arch-s3c2410/vr1000-map.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks - * - * Machine VR1000 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* needs arch/map.h including with this */ - -/* ok, we've used up to 0x13000000, now we need to find space for the - * peripherals that live in the nGCS[x] areas, which are quite numerous - * in their space. We also have the board's CPLD to find register space - * for. - */ - -#ifndef __ASM_ARCH_VR1000MAP_H -#define __ASM_ARCH_VR1000MAP_H - -#include - -#define VR1000_IOADDR(x) BAST_IOADDR(x) - -/* we put the CPLD registers next, to get them out of the way */ - -#define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ -#define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) - -#define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ -#define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) - -#define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ -#define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) - -#define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ -#define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) - -/* next, we have the PC104 ISA interrupt registers */ - -#define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ -#define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) - -#define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ -#define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) - -#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ -#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) - -/* 0xE0000000 contains the IO space that is split by speed and - * wether the access is for 8 or 16bit IO... this ensures that - * the correct access is made - * - * 0x10000000 of space, partitioned as so: - * - * 0x00000000 to 0x04000000 8bit, slow - * 0x04000000 to 0x08000000 16bit, slow - * 0x08000000 to 0x0C000000 16bit, net - * 0x0C000000 to 0x10000000 16bit, fast - * - * each of these spaces has the following in: - * - * 0x02000000 to 0x02100000 1MB IDE primary channel - * 0x02100000 to 0x02200000 1MB IDE primary channel aux - * 0x02200000 to 0x02400000 1MB IDE secondary channel - * 0x02300000 to 0x02400000 1MB IDE secondary channel aux - * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers - * 0x02600000 to 0x02700000 1MB - * - * the phyiscal layout of the zones are: - * nGCS2 - 8bit, slow - * nGCS3 - 16bit, slow - * nGCS4 - 16bit, net - * nGCS5 - 16bit, fast - */ - -#define VR1000_VA_MULTISPACE (0xE0000000) - -#define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) -#define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) -#define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) -#define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) -#define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) -#define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) -#define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) -#define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) -#define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) - -/* physical offset addresses for the peripherals */ - -#define VR1000_PA_IDEPRI (0x02000000) -#define VR1000_PA_IDEPRIAUX (0x02800000) -#define VR1000_PA_IDESEC (0x03000000) -#define VR1000_PA_IDESECAUX (0x03800000) -#define VR1000_PA_DM9000 (0x05000000) - -#define VR1000_PA_SERIAL (0x11800000) -#define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) - -/* VR1000 ram is in CS1, with A26..A24 = 2_101 */ -#define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) - -/* some configurations for the peripherals */ - -#define VR1000_DM9000_CS VR1000_VAM_CS4 - -#endif /* __ASM_ARCH_VR1000MAP_H */ diff --git a/include/asm-arm/arch-sa1100/SA-1100.h b/include/asm-arm/arch-sa1100/SA-1100.h deleted file mode 100644 index 62aaf04a3906..000000000000 --- a/include/asm-arm/arch-sa1100/SA-1100.h +++ /dev/null @@ -1,2072 +0,0 @@ -/* - * FILE SA-1100.h - * - * Version 1.2 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date January 1998 (April 1997) - * System StrongARM SA-1100 - * Language C or ARM Assembly - * Purpose Definition of constants related to the StrongARM - * SA-1100 microprocessor (Advanced RISC Machine (ARM) - * architecture version 4). This file is based on the - * StrongARM SA-1100 data sheet version 2.2. - * - */ - - -/* Be sure that virtual mapping is defined right */ -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not SA-1100.h -#endif - -#include "bitfield.h" - -/* - * SA1100 CS line to physical address - */ - -#define SA1100_CS0_PHYS 0x00000000 -#define SA1100_CS1_PHYS 0x08000000 -#define SA1100_CS2_PHYS 0x10000000 -#define SA1100_CS3_PHYS 0x18000000 -#define SA1100_CS4_PHYS 0x40000000 -#define SA1100_CS5_PHYS 0x48000000 - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ - -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ - - -/* - * Universal Serial Bus (USB) Device Controller (UDC) control registers - * - * Registers - * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control Register (read/write). - * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Address Register (read/write). - * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Output Maximum Packet size register - * (read/write). - * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Input Maximum Packet size register - * (read/write). - * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 0 - * (read/write). - * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 1 - * (output, read/write). - * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Control/Status register end-point 2 - * (input, read/write). - * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Data register end-point 0 - * (read/write). - * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Write Count register end-point 0 - * (read). - * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Data Register (read/write). - * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device - * Controller (UDC) Status Register (read/write). - */ - -#define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */ -#define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */ -#define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */ -#define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */ -#define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */ -#define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */ -#define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */ -#define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */ -#define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */ -#define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */ -#define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */ - -#define UDCCR_UDD 0x00000001 /* UDC Disable */ -#define UDCCR_UDA 0x00000002 /* UDC Active (read) */ -#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */ -#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ - /* (disable) */ -#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ - /* (disable) */ -#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ - /* (disable) */ -#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ - /* (disable) */ -#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */ -#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ - -#define UDCAR_ADD Fld (7, 0) /* function ADDress */ - -#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ - /* [byte] */ -#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ - /* [1..256 byte] */ \ - (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) - -#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ - /* [byte] */ -#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ - /* [1..256 byte] */ \ - (((Size) - 1) << FShft (UDCIMP_INMAXP)) - -#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ -#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ -#define UDCCS0_SST 0x00000004 /* Sent STall */ -#define UDCCS0_FST 0x00000008 /* Force STall */ -#define UDCCS0_DE 0x00000010 /* Data End */ -#define UDCCS0_SE 0x00000020 /* Setup End (read) */ -#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ - /* (write) */ -#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ - -#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ - /* Service request (read) */ -#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ -#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ -#define UDCCS1_SST 0x00000008 /* Sent STall */ -#define UDCCS1_FST 0x00000010 /* Force STall */ -#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ - -#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ - /* Service request (read) */ -#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ -#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ -#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ -#define UDCCS2_SST 0x00000010 /* Sent STall */ -#define UDCCS2_FST 0x00000020 /* Force STall */ - -#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ - -#define UDCWC_WC Fld (4, 0) /* Write Count */ - -#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ - -#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ -#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ -#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ -#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ -#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ -#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ - - -/* - * Universal Asynchronous Receiver/Transmitter (UART) control registers - * - * Registers - * Ser1UTCR0 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser1UTCR1 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser1UTCR2 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser1UTCR3 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser1UTDR Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser1UTSR0 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser1UTSR1 Serial port 1 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Ser2UTCR0 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser2UTCR1 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser2UTCR2 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser2UTCR3 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser2UTCR4 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 4 - * (read/write). - * Ser2UTDR Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser2UTSR0 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser2UTSR1 Serial port 2 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Ser3UTCR0 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 0 - * (read/write). - * Ser3UTCR1 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 1 - * (read/write). - * Ser3UTCR2 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 2 - * (read/write). - * Ser3UTCR3 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Control Register 3 - * (read/write). - * Ser3UTDR Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Data Register - * (read/write). - * Ser3UTSR0 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 0 - * (read/write). - * Ser3UTSR1 Serial port 3 Universal Asynchronous - * Receiver/Transmitter (UART) Status Register 1 (read). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fua, Tua Frequency, period of the UART communication. - */ - -#define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */ -#define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */ -#define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */ -#define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */ -#define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */ -#define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */ -#define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */ -#define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */ - -#define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ -#define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ -#define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ -#define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ -#define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ -#define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ -#define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ - -#define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ -#define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ -#define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ -#define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ -#define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ -#define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ -#define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ -#define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ - -#define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ -#define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ -#define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ -#define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ -#define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ -#define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ -#define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ - -/* Those are still used in some places */ -#define _Ser1UTCR0 __PREG(Ser1UTCR0) -#define _Ser2UTCR0 __PREG(Ser2UTCR0) -#define _Ser3UTCR0 __PREG(Ser3UTCR0) - -/* Register offsets */ -#define UTCR0 0x00 -#define UTCR1 0x04 -#define UTCR2 0x08 -#define UTCR3 0x0c -#define UTDR 0x14 -#define UTSR0 0x1c -#define UTSR1 0x20 - -#define UTCR0_PE 0x00000001 /* Parity Enable */ -#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ -#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ -#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ -#define UTCR0_SBS 0x00000004 /* Stop Bit Select */ -#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ -#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ -#define UTCR0_DSS 0x00000008 /* Data Size Select */ -#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ -#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ -#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ - /* (ser. port 1: GPIO [18], */ - /* ser. port 3: GPIO [20]) */ -#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ -#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ -#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ -#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ -#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ -#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ -#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ - (UTCR0_1StpBit + UTCR0_8BitData) - -#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ -#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ - /* fua = fxtl/(16*(BRD[11:0] + 1)) */ - /* Tua = 16*(BRD [11:0] + 1)*Txtl */ -#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ - FShft (UTCR1_BRD)) -#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ - FShft (UTCR2_BRD)) - /* fua = fxtl/(16*Floor (Div/16)) */ - /* Tua = 16*Floor (Div/16)*Txtl */ -#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ - FShft (UTCR1_BRD)) -#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ - FShft (UTCR2_BRD)) - /* fua = fxtl/(16*Ceil (Div/16)) */ - /* Tua = 16*Ceil (Div/16)*Txtl */ - -#define UTCR3_RXE 0x00000001 /* Receive Enable */ -#define UTCR3_TXE 0x00000002 /* Transmit Enable */ -#define UTCR3_BRK 0x00000004 /* BReaK mode */ -#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Interrupt Enable */ -#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define UTCR3_LBM 0x00000020 /* Look-Back Mode */ -#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ - /* TIE, LBM can be set or cleared) */ \ - (UTCR3_RXE + UTCR3_TXE) - -#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ - /* (HP-SIR) modulation Enable */ -#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ -#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ -#define UTCR4_LPM 0x00000002 /* Low-Power Mode */ -#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ -#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ - -#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ -#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ -#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Service request (read) */ -#define UTSR0_RID 0x00000004 /* Receiver IDle */ -#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ -#define UTSR0_REB 0x00000010 /* Receive End of Break */ -#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ - -#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ -#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ -#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ -#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ -#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ -#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ - - -/* - * Synchronous Data Link Controller (SDLC) control registers - * - * Registers - * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 0 (read/write). - * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 1 (read/write). - * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 2 (read/write). - * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 3 (read/write). - * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) - * Control Register 4 (read/write). - * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) - * Data Register (read/write). - * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) - * Status Register 0 (read/write). - * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) - * Status Register 1 (read/write). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fsd, Tsd Frequency, period of the SDLC communication. - */ - -#define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */ -#define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */ -#define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */ -#define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */ -#define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */ -#define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */ -#define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */ -#define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */ - -#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ -#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ -#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ -#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ -#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ -#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ -#define SDCR0_LBM 0x00000004 /* Look-Back Mode */ -#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ -#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ -#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ -#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ -#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ - /* (GPIO [16]) */ -#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ -#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ -#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ -#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ -#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ -#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ -#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ -#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ - -#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ - /* (GPIO [17]) */ -#define SDCR1_TXE 0x00000002 /* Transmit Enable */ -#define SDCR1_RXE 0x00000004 /* Receive Enable */ -#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Interrupt Enable */ -#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define SDCR1_AME 0x00000020 /* Address Match Enable */ -#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ -#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ -#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ -#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ - -#define SDCR2_AMV Fld (8, 0) /* Address Match Value */ - -#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ -#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ - /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ - /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ -#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ - FShft (SDCR3_BRD)) -#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ - (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ - FShft (SDCR4_BRD)) - /* fsd = fxtl/(16*Floor (Div/16)) */ - /* Tsd = 16*Floor (Div/16)*Txtl */ -#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ - FShft (SDCR3_BRD)) -#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ - (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ - FShft (SDCR4_BRD)) - /* fsd = fxtl/(16*Ceil (Div/16)) */ - /* Tsd = 16*Ceil (Div/16)*Txtl */ - -#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ -#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ -#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ -#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ -#define SDSR0_RAB 0x00000004 /* Receive ABort */ -#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ - /* more Service request (read) */ - -#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ -#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ -#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ -#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ -#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ -#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ -#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ - - -/* - * High-Speed Serial to Parallel controller (HSSP) control registers - * - * Registers - * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 0 (read/write). - * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 1 (read/write). - * Ser2HSDR Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Data Register (read/write). - * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Status Register 0 (read/write). - * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Status Register 1 (read). - * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel - * controller (HSSP) Control Register 2 (read/write). - * [The HSCR2 register is only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - */ - -#define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */ -#define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */ -#define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */ -#define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */ -#define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */ -#define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */ - -#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ -#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ -#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ -#define HSCR0_LBM 0x00000002 /* Look-Back Mode */ -#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ -#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ -#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ -#define HSCR0_TXE 0x00000008 /* Transmit Enable */ -#define HSCR0_RXE 0x00000010 /* Receive Enable */ -#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ - /* more Interrupt Enable */ -#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define HSCR0_AME 0x00000080 /* Address Match Enable */ - -#define HSCR1_AMV Fld (8, 0) /* Address Match Value */ - -#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ -#if 0 /* Hidden receive FIFO bits */ -#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ -#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ -#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ -#endif /* 0 */ - -#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ -#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ -#define HSSR0_RAB 0x00000004 /* Receive ABort */ -#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ - /* more Service request (read) */ -#define HSSR0_FRE 0x00000020 /* receive FRaming Error */ - -#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ -#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ -#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ -#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ -#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ -#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ - -#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ -#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ - /* (inverted) */ -#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ - /* (non-inverted) */ -#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ -#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ - /* (inverted) */ -#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ - /* (non-inverted) */ - - -/* - * Multi-media Communications Port (MCP) control registers - * - * Registers - * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) - * Control Register 0 (read/write). - * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 0 (audio, read/write). - * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 1 (telecom, read/write). - * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) - * Data Register 2 (CODEC registers, read/write). - * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) - * Status Register (read/write). - * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) - * Control Register 1 (read/write). - * [The MCCR1 register is only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - * - * Clocks - * fmc, Tmc Frequency, period of the MCP communication (10 MHz, - * 12 MHz, or GPIO [21]). - * faud, Taud Frequency, period of the audio sampling. - * ftcm, Ttcm Frequency, period of the telecom sampling. - */ - -#define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */ -#define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */ -#define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */ -#define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */ -#define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */ -#define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */ - -#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ - /* [6..127] */ - /* faud = fmc/(32*ASD) */ - /* Taud = 32*ASD*Tmc */ -#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ - /* [192..4064] */ \ - ((Div)/32 << FShft (MCCR0_ASD)) - /* faud = fmc/(32*Floor (Div/32)) */ - /* Taud = 32*Floor (Div/32)*Tmc */ -#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ - (((Div) + 31)/32 << FShft (MCCR0_ASD)) - /* faud = fmc/(32*Ceil (Div/32)) */ - /* Taud = 32*Ceil (Div/32)*Tmc */ -#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ - /* Divisor/32 [16..127] */ - /* ftcm = fmc/(32*TSD) */ - /* Ttcm = 32*TSD*Tmc */ -#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ - /* [512..4064] */ \ - ((Div)/32 << FShft (MCCR0_TSD)) - /* ftcm = fmc/(32*Floor (Div/32)) */ - /* Ttcm = 32*Floor (Div/32)*Tmc */ -#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ - (((Div) + 31)/32 << FShft (MCCR0_TSD)) - /* ftcm = fmc/(32*Ceil (Div/32)) */ - /* Ttcm = 32*Ceil (Div/32)*Tmc */ -#define MCCR0_MCE 0x00010000 /* MCP Enable */ -#define MCCR0_ECS 0x00020000 /* External Clock Select */ -#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ -#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ -#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ - /* sampling/storing Mode */ -#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ -#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ -#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ - /* or less interrupt Enable */ -#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ - /* or more interrupt Enable */ -#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ - /* or less interrupt Enable */ -#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ - /* more interrupt Enable */ -#define MCCR0_LBM 0x00800000 /* Look-Back Mode */ -#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ -#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ - (((Div) - 1) << FShft (MCCR0_ECP)) - -#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ - /* FIFOs */ - -#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ - /* FIFOs */ - - /* receive/transmit CODEC reg. */ - /* FIFOs: */ -#define MCDR2_DATA Fld (16, 0) /* reg. DATA */ -#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ -#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ -#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ -#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ - -#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ - /* or less Service request (read) */ -#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ - /* more Service request (read) */ -#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ - /* or less Service request (read) */ -#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ - /* or more Service request (read) */ -#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ -#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ -#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ -#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ -#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ - /* (read) */ -#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ - /* (read) */ -#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ - /* (read) */ -#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ - /* (read) */ -#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ - /* (read) */ -#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ - /* (read) */ -#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ -#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ - -#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ -#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ - /* (11.981 MHz) */ -#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ - /* (9.585 MHz) */ - - -/* - * Synchronous Serial Port (SSP) control registers - * - * Registers - * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control - * Register 0 (read/write). - * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control - * Register 1 (read/write). - * [Bits SPO and SP are only implemented in versions 2.0 - * (rev. = 8) and higher of the StrongARM SA-1100.] - * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data - * Register (read/write). - * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status - * Register (read/write). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fss, Tss Frequency, period of the SSP communication. - */ - -#define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */ -#define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */ -#define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */ -#define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */ - -#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ -#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ - (((Size) - 1) << FShft (SSCR0_DSS)) -#define SSCR0_FRF Fld (2, 4) /* FRame Format */ -#define SSCR0_Motorola /* Motorola Serial Peripheral */ \ - /* Interface (SPI) format */ \ - (0 << FShft (SSCR0_FRF)) -#define SSCR0_TI /* Texas Instruments Synchronous */ \ - /* Serial format */ \ - (1 << FShft (SSCR0_FRF)) -#define SSCR0_National /* National Microwire format */ \ - (2 << FShft (SSCR0_FRF)) -#define SSCR0_SSE 0x00000080 /* SSP Enable */ -#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ - /* fss = fxtl/(2*(SCR + 1)) */ - /* Tss = 2*(SCR + 1)*Txtl */ -#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ - (((Div) - 2)/2 << FShft (SSCR0_SCR)) - /* fss = fxtl/(2*Floor (Div/2)) */ - /* Tss = 2*Floor (Div/2)*Txtl */ -#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ - (((Div) - 1)/2 << FShft (SSCR0_SCR)) - /* fss = fxtl/(2*Ceil (Div/2)) */ - /* Tss = 2*Ceil (Div/2)*Txtl */ - -#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ - /* Interrupt Enable */ -#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ - /* Interrupt Enable */ -#define SSCR1_LBM 0x00000004 /* Look-Back Mode */ -#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ -#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ -#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ -#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ -#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ - /* after frame (SFRM, 1st edge) */ -#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ - /* after frame (SFRM, 1st edge) */ -#define SSCR1_ECS 0x00000020 /* External Clock Select */ -#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ -#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ - -#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ - -#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ -#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ -#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ -#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ - /* Service request (read) */ -#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ - /* Service request (read) */ -#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ - - -/* - * Operating System (OS) timer control registers - * - * Registers - * OSMR0 Operating System (OS) timer Match Register 0 - * (read/write). - * OSMR1 Operating System (OS) timer Match Register 1 - * (read/write). - * OSMR2 Operating System (OS) timer Match Register 2 - * (read/write). - * OSMR3 Operating System (OS) timer Match Register 3 - * (read/write). - * OSCR Operating System (OS) timer Counter Register - * (read/write). - * OSSR Operating System (OS) timer Status Register - * (read/write). - * OWER Operating System (OS) timer Watch-dog Enable Register - * (read/write). - * OIER Operating System (OS) timer Interrupt Enable Register - * (read/write). - */ - -#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */ -#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */ -#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */ -#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */ -#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */ -#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */ -#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */ -#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */ - -#define OSSR_M(Nb) /* Match detected [0..3] */ \ - (0x00000001 << (Nb)) -#define OSSR_M0 OSSR_M (0) /* Match detected 0 */ -#define OSSR_M1 OSSR_M (1) /* Match detected 1 */ -#define OSSR_M2 OSSR_M (2) /* Match detected 2 */ -#define OSSR_M3 OSSR_M (3) /* Match detected 3 */ - -#define OWER_WME 0x00000001 /* Watch-dog Match Enable */ - /* (set only) */ - -#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ - (0x00000001 << (Nb)) -#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ -#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ -#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ -#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ - - -/* - * Real-Time Clock (RTC) control registers - * - * Registers - * RTAR Real-Time Clock (RTC) Alarm Register (read/write). - * RCNR Real-Time Clock (RTC) CouNt Register (read/write). - * RTTR Real-Time Clock (RTC) Trim Register (read/write). - * RTSR Real-Time Clock (RTC) Status Register (read/write). - * - * Clocks - * frtx, Trtx Frequency, period of the real-time clock crystal - * (32.768 kHz nominal). - * frtc, Trtc Frequency, period of the real-time clock counter - * (1 Hz nominal). - */ - -#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ -#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ -#define RTTR __REG(0x90010008) /* RTC Trim Reg. */ -#define RTSR __REG(0x90010010) /* RTC Status Reg. */ - -#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ -#define RTTR_D Fld (10, 16) /* trim Delete count */ - /* frtc = (1023*(C + 1) - D)*frtx/ */ - /* (1023*(C + 1)^2) */ - /* Trtc = (1023*(C + 1)^2)*Trtx/ */ - /* (1023*(C + 1) - D) */ - -#define RTSR_AL 0x00000001 /* ALarm detected */ -#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ -#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ -#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ - - -/* - * Power Manager (PM) control registers - * - * Registers - * PMCR Power Manager (PM) Control Register (read/write). - * PSSR Power Manager (PM) Sleep Status Register (read/write). - * PSPR Power Manager (PM) Scratch-Pad Register (read/write). - * PWER Power Manager (PM) Wake-up Enable Register - * (read/write). - * PCFR Power Manager (PM) general ConFiguration Register - * (read/write). - * PPCR Power Manager (PM) Phase-Locked Loop (PLL) - * Configuration Register (read/write). - * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) - * Sleep state Register (read/write, see GPIO pins). - * POSR Power Manager (PM) Oscillator Status Register (read). - * - * Clocks - * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz - * or 3.5795 MHz). - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - */ - -#define PMCR __REG(0x90020000) /* PM Control Reg. */ -#define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */ -#define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */ -#define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */ -#define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */ -#define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */ -#define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */ -#define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */ - -#define PMCR_SF 0x00000001 /* Sleep Force (set only) */ - -#define PSSR_SS 0x00000001 /* Software Sleep */ -#define PSSR_BFS 0x00000002 /* Battery Fault Status */ - /* (BATT_FAULT) */ -#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ -#define PSSR_DH 0x00000008 /* DRAM control Hold */ -#define PSSR_PH 0x00000010 /* Peripheral control Hold */ - -#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ -#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ -#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ -#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ -#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ -#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ -#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ -#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ -#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ -#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ -#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ -#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ -#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ -#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ -#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ -#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ -#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ -#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ -#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ -#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ -#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ -#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ -#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ -#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ -#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ -#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ -#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ -#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ -#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ -#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ - -#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ -#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ -#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ -#define PCFR_FP 0x00000002 /* Float PCMCIA pins */ -#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ -#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ -#define PCFR_FS 0x00000004 /* Float Static memory pins */ -#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ -#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ -#define PCFR_FO 0x00000008 /* Force RTC oscillator */ - /* (32.768 kHz) enable On */ - -#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ -#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ - (0x00 << FShft (PPCR_CCF)) -#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ - (0x01 << FShft (PPCR_CCF)) -#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ - (0x02 << FShft (PPCR_CCF)) -#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ - (0x03 << FShft (PPCR_CCF)) -#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ - (0x04 << FShft (PPCR_CCF)) -#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ - (0x05 << FShft (PPCR_CCF)) -#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ - (0x06 << FShft (PPCR_CCF)) -#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ - (0x07 << FShft (PPCR_CCF)) -#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ - (0x08 << FShft (PPCR_CCF)) -#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ - (0x09 << FShft (PPCR_CCF)) -#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ - (0x0A << FShft (PPCR_CCF)) -#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ - (0x0B << FShft (PPCR_CCF)) -#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ - (0x0C << FShft (PPCR_CCF)) -#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ - (0x0D << FShft (PPCR_CCF)) -#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ - (0x0E << FShft (PPCR_CCF)) -#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ - (0x0F << FShft (PPCR_CCF)) - /* 3.6864 MHz crystal (fxtl): */ -#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ -#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ -#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ -#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ -#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ -#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ -#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ -#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ -#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ -#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ -#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ -#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ -#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ -#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ -#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ -#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ - /* 3.5795 MHz crystal (fxtl): */ -#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ -#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ -#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ -#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ -#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ -#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ -#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ -#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ -#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ -#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ -#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ -#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ -#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ -#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ -#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ -#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ - -#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ - - -/* - * Reset Controller (RC) control registers - * - * Registers - * RSRR Reset Controller (RC) Software Reset Register - * (read/write). - * RCSR Reset Controller (RC) Status Register (read/write). - */ - -#define RSRR __REG(0x90030000) /* RC Software Reset Reg. */ -#define RCSR __REG(0x90030004) /* RC Status Reg. */ - -#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ - -#define RCSR_HWR 0x00000001 /* HardWare Reset */ -#define RCSR_SWR 0x00000002 /* SoftWare Reset */ -#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ -#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ - - -/* - * Test unit control registers - * - * Registers - * TUCR Test Unit Control Register (read/write). - */ - -#define TUCR __REG(0x90030008) /* Test Unit Control Reg. */ - -#define TUCR_TIC 0x00000040 /* TIC mode */ -#define TUCR_TTST 0x00000080 /* Trim TeST mode */ -#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ - /* Check */ -#define TUCR_PMD 0x00000200 /* Power Management Disable */ -#define TUCR_MR 0x00000400 /* Memory Request mode */ -#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ -#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ - /* grant (MBGNT) on GPIO [22:21] */ -#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ -#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ -#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ -#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ -#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ -#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ -#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ - (0 << FShft (TUCR_TSEL)) -#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ - (1 << FShft (TUCR_TSEL)) -#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ - (2 << FShft (TUCR_TSEL)) -#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ - (3 << FShft (TUCR_TSEL)) -#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ - /* Clocks on GPIO [26:27] */ \ - (4 << FShft (TUCR_TSEL)) -#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ - /* (Alternative) */ \ - (5 << FShft (TUCR_TSEL)) -#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ - (6 << FShft (TUCR_TSEL)) -#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ - (7 << FShft (TUCR_TSEL)) - - -/* - * General-Purpose Input/Output (GPIO) control registers - * - * Registers - * GPLR General-Purpose Input/Output (GPIO) Pin Level - * Register (read). - * GPDR General-Purpose Input/Output (GPIO) Pin Direction - * Register (read/write). - * GPSR General-Purpose Input/Output (GPIO) Pin output Set - * Register (write). - * GPCR General-Purpose Input/Output (GPIO) Pin output Clear - * Register (write). - * GRER General-Purpose Input/Output (GPIO) Rising-Edge - * detect Register (read/write). - * GFER General-Purpose Input/Output (GPIO) Falling-Edge - * detect Register (read/write). - * GEDR General-Purpose Input/Output (GPIO) Edge Detect - * status Register (read/write). - * GAFR General-Purpose Input/Output (GPIO) Alternate - * Function Register (read/write). - * - * Clock - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - */ - -#define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */ -#define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */ -#define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */ -#define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */ -#define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */ -#define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */ -#define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */ -#define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */ - -#define GPIO_MIN (0) -#define GPIO_MAX (27) - -#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ - (0x00000001 << (Nb)) -#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ -#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ -#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ -#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ -#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ -#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ -#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ -#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ -#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ -#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ -#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ -#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ -#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ -#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ -#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ -#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ -#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ -#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ -#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ -#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ -#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ -#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ -#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ -#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ -#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ -#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ -#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ -#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ - -#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ - GPIO_GPIO ((Nb) - 6) -#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ -#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ -#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ -#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ -#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ -#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ -#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ -#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ - /* ser. port 4: */ -#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ -#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ -#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ -#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ - /* ser. port 1: */ -#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ -#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ -#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ -#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ -#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ - /* ser. port 4: */ -#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ - /* ser. port 3: */ -#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ - /* ser. port 4: */ -#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ - /* test controller: */ -#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ -#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ -#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ -#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ -#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ -#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ -#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ -#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ - -#define GPDR_In 0 /* Input */ -#define GPDR_Out 1 /* Output */ - - -/* - * Interrupt Controller (IC) control registers - * - * Registers - * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) - * Pending register (read). - * ICMR Interrupt Controller (IC) Mask Register (read/write). - * ICLR Interrupt Controller (IC) Level Register (read/write). - * ICCR Interrupt Controller (IC) Control Register - * (read/write). - * [The ICCR register is only implemented in versions 2.0 - * (rev. = 8) and higher of the StrongARM SA-1100.] - * ICFP Interrupt Controller (IC) Fast Interrupt reQuest - * (FIQ) Pending register (read). - * ICPR Interrupt Controller (IC) Pending Register (read). - * [The ICPR register is active low (inverted) in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it is active high (non-inverted) in - * versions 2.0 (rev. = 8) and higher.] - */ - -#define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */ -#define ICMR __REG(0x90050004) /* IC Mask Reg. */ -#define ICLR __REG(0x90050008) /* IC Level Reg. */ -#define ICCR __REG(0x9005000C) /* IC Control Reg. */ -#define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */ -#define ICPR __REG(0x90050020) /* IC Pending Reg. */ - -#define IC_GPIO(Nb) /* GPIO [0..10] */ \ - (0x00000001 << (Nb)) -#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ -#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ -#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ -#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ -#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ -#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ -#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ -#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ -#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ -#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ -#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ -#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ -#define IC_LCD 0x00001000 /* LCD controller */ -#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ -#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ -#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ -#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ -#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ -#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ -#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ -#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ - (0x00100000 << (Nb)) -#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ -#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ -#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ -#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ -#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ -#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ -#define IC_OST(Nb) /* OS Timer match [0..3] */ \ - (0x04000000 << (Nb)) -#define IC_OST0 IC_OST (0) /* OS Timer match 0 */ -#define IC_OST1 IC_OST (1) /* OS Timer match 1 */ -#define IC_OST2 IC_OST (2) /* OS Timer match 2 */ -#define IC_OST3 IC_OST (3) /* OS Timer match 3 */ -#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ -#define IC_RTCAlrm 0x80000000 /* RTC Alarm */ - -#define ICLR_IRQ 0 /* Interrupt ReQuest */ -#define ICLR_FIQ 1 /* Fast Interrupt reQuest */ - -#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ - /* Mask */ -#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ - /* (ICMR ignored) */ -#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ - /* enable (ICMR used) */ - - -/* - * Peripheral Pin Controller (PPC) control registers - * - * Registers - * PPDR Peripheral Pin Controller (PPC) Pin Direction - * Register (read/write). - * PPSR Peripheral Pin Controller (PPC) Pin State Register - * (read/write). - * PPAR Peripheral Pin Controller (PPC) Pin Assignment - * Register (read/write). - * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin - * Direction Register (read/write). - * PPFR Peripheral Pin Controller (PPC) Pin Flag Register - * (read). - */ - -#define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */ -#define PPSR __REG(0x90060004) /* PPC Pin State Reg. */ -#define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */ -#define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */ -#define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */ - -#define PPC_LDD(Nb) /* LCD Data [0..7] */ \ - (0x00000001 << (Nb)) -#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ -#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ -#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ -#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ -#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ -#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ -#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ -#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ -#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ -#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ -#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ -#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ - /* ser. port 1: */ -#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ -#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ - /* ser. port 2: */ -#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ -#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ - /* ser. port 3: */ -#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ -#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ - /* ser. port 4: */ -#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ -#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ -#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ -#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ - -#define PPDR_In 0 /* Input */ -#define PPDR_Out 1 /* Output */ - - /* ser. port 1: */ -#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ -#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ -#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ - /* ser. port 4: */ -#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ -#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ - /* & SFRM_C */ -#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ - -#define PSDR_OutL 0 /* Output Low in sleep mode */ -#define PSDR_Flt 1 /* Floating (input) in sleep mode */ - -#define PPFR_LCD 0x00000001 /* LCD controller */ -#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ -#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ -#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ -#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ -#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ -#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ -#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ -#define PPFR_PerEn 0 /* Peripheral Enabled */ -#define PPFR_PPCEn 1 /* PPC Enabled */ - - -/* - * Dynamic Random-Access Memory (DRAM) control registers - * - * Registers - * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) - * CoNFiGuration register (read/write). - * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 0 - * (read/write). - * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 1 - * (read/write). - * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) - * Column Address Strobe (CAS) shift register 2 - * (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fcas, Tcas Frequency, period of the DRAM CAS shift registers. - */ - -#define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */ -#define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */ -#define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */ -#define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */ - -/* SA1100 MDCNFG values */ -#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ - (0x00000001 << (Nb)) -#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ -#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ -#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ -#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ -#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ -#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ - (((Add) - 9) << FShft (MDCNFG_DRAC)) -#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ - /* (fcas = fcpu/2) */ -#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ -#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ - (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) -#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ - (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) -#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ -#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ - (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) -#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ - (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) -#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ -#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ - ((Tcpu) << FShft (MDCNFG_TDL)) -#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ - /* [Tmem] */ -#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ - /* [0..262136 Tcpu] */ \ - ((Tcpu)/8 << FShft (MDCNFG_DRI)) - -/* SA1110 MDCNFG values */ -#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ -#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ -#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ -#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ -#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ - /* bank 0/1 */ -#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ -#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ -#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ - /* deassertion 0/1 */ -#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ -#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ -#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ -#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ -#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ -#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ - /* bank 0/1 */ -#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ -#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ -#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ - /* deassertion 0/1 */ -#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ - - -/* - * Static memory control registers - * - * Registers - * MSC0 Memory system: Static memory Control register 0 - * (read/write). - * MSC1 Memory system: Static memory Control register 1 - * (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - */ - -#define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */ -#define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */ -#define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */ - -#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ - Fld (16, ((Nb) Modulo 2)*16) -#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ -#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ -#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ -#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ - -#define MSC_RT Fld (2, 0) /* ROM/static memory Type */ -#define MSC_NonBrst /* Non-Burst static memory */ \ - (0 << FShft (MSC_RT)) -#define MSC_SRAM /* 32-bit byte-writable SRAM */ \ - (1 << FShft (MSC_RT)) -#define MSC_Brst4 /* Burst-of-4 static memory */ \ - (2 << FShft (MSC_RT)) -#define MSC_Brst8 /* Burst-of-8 static memory */ \ - (3 << FShft (MSC_RT)) -#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ -#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ -#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ -#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ - /* First access - 1(.5) [Tmem] */ -#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ - /* static memory) [3..65 Tcpu] */ \ - ((((Tcpu) - 3)/2) << FShft (MSC_RDF)) -#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) -#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) -#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDF)) -#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ - /* Next access - 1 [Tmem] */ -#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) -#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) -#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ - /* static memory) [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) -#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) -#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ - /* time/2 [Tmem] */ -#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ - (((Tcpu)/4) << FShft (MSC_RRR)) -#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ - ((((Tcpu) + 3)/4) << FShft (MSC_RRR)) - - -/* - * Personal Computer Memory Card International Association (PCMCIA) control - * register - * - * Register - * MECR Memory system: Expansion memory bus (PCMCIA) - * Configuration Register (read/write). - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). - */ - - /* Memory system: */ -#define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */ - -#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ - Fld (15, (Nb)*16) -#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ -#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ - -#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ -#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSIO)) -#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSIO)) -#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ - /* [Tmem] */ -#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSA)) -#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSA)) -#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ -#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ - ((((Tcpu) - 2)/2) << FShft (MECR_BSM)) -#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ - ((((Tcpu) - 1)/2) << FShft (MECR_BSM)) - -/* - * On SA1110 only - */ - -#define MDREFR __REG(0xA000001C) - -#define MDREFR_TRASR Fld (4, 0) -#define MDREFR_DRI Fld (12, 4) -#define MDREFR_E0PIN (1 << 16) -#define MDREFR_K0RUN (1 << 17) -#define MDREFR_K0DB2 (1 << 18) -#define MDREFR_E1PIN (1 << 20) -#define MDREFR_K1RUN (1 << 21) -#define MDREFR_K1DB2 (1 << 22) -#define MDREFR_K2RUN (1 << 25) -#define MDREFR_K2DB2 (1 << 26) -#define MDREFR_EAPD (1 << 28) -#define MDREFR_KAPD (1 << 29) -#define MDREFR_SLFRSH (1 << 31) - - -/* - * Direct Memory Access (DMA) control registers - * - * Registers - * DDAR0 Direct Memory Access (DMA) Device Address Register - * channel 0 (read/write). - * DCSR0 Direct Memory Access (DMA) Control and Status - * Register channel 0 (read/write). - * DBSA0 Direct Memory Access (DMA) Buffer Start address - * register A channel 0 (read/write). - * DBTA0 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 0 (read/write). - * DBSB0 Direct Memory Access (DMA) Buffer Start address - * register B channel 0 (read/write). - * DBTB0 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 0 (read/write). - * - * DDAR1 Direct Memory Access (DMA) Device Address Register - * channel 1 (read/write). - * DCSR1 Direct Memory Access (DMA) Control and Status - * Register channel 1 (read/write). - * DBSA1 Direct Memory Access (DMA) Buffer Start address - * register A channel 1 (read/write). - * DBTA1 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 1 (read/write). - * DBSB1 Direct Memory Access (DMA) Buffer Start address - * register B channel 1 (read/write). - * DBTB1 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 1 (read/write). - * - * DDAR2 Direct Memory Access (DMA) Device Address Register - * channel 2 (read/write). - * DCSR2 Direct Memory Access (DMA) Control and Status - * Register channel 2 (read/write). - * DBSA2 Direct Memory Access (DMA) Buffer Start address - * register A channel 2 (read/write). - * DBTA2 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 2 (read/write). - * DBSB2 Direct Memory Access (DMA) Buffer Start address - * register B channel 2 (read/write). - * DBTB2 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 2 (read/write). - * - * DDAR3 Direct Memory Access (DMA) Device Address Register - * channel 3 (read/write). - * DCSR3 Direct Memory Access (DMA) Control and Status - * Register channel 3 (read/write). - * DBSA3 Direct Memory Access (DMA) Buffer Start address - * register A channel 3 (read/write). - * DBTA3 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 3 (read/write). - * DBSB3 Direct Memory Access (DMA) Buffer Start address - * register B channel 3 (read/write). - * DBTB3 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 3 (read/write). - * - * DDAR4 Direct Memory Access (DMA) Device Address Register - * channel 4 (read/write). - * DCSR4 Direct Memory Access (DMA) Control and Status - * Register channel 4 (read/write). - * DBSA4 Direct Memory Access (DMA) Buffer Start address - * register A channel 4 (read/write). - * DBTA4 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 4 (read/write). - * DBSB4 Direct Memory Access (DMA) Buffer Start address - * register B channel 4 (read/write). - * DBTB4 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 4 (read/write). - * - * DDAR5 Direct Memory Access (DMA) Device Address Register - * channel 5 (read/write). - * DCSR5 Direct Memory Access (DMA) Control and Status - * Register channel 5 (read/write). - * DBSA5 Direct Memory Access (DMA) Buffer Start address - * register A channel 5 (read/write). - * DBTA5 Direct Memory Access (DMA) Buffer Transfer count - * register A channel 5 (read/write). - * DBSB5 Direct Memory Access (DMA) Buffer Start address - * register B channel 5 (read/write). - * DBTB5 Direct Memory Access (DMA) Buffer Transfer count - * register B channel 5 (read/write). - */ - -#define DMASp 0x00000020 /* DMA control reg. Space [byte] */ - -#define DDAR(Nb) __REG(0xB0000000 + (Nb)*DMASp) /* DMA Device Address Reg. channel [0..5] */ -#define SetDCSR(Nb) __REG(0xB0000004 + (Nb)*DMASp) /* Set DMA Control & Status Reg. channel [0..5] (write) */ -#define ClrDCSR(Nb) __REG(0xB0000008 + (Nb)*DMASp) /* Clear DMA Control & Status Reg. channel [0..5] (write) */ -#define RdDCSR(Nb) __REG(0xB000000C + (Nb)*DMASp) /* Read DMA Control & Status Reg. channel [0..5] (read) */ -#define DBSA(Nb) __REG(0xB0000010 + (Nb)*DMASp) /* DMA Buffer Start address reg. A channel [0..5] */ -#define DBTA(Nb) __REG(0xB0000014 + (Nb)*DMASp) /* DMA Buffer Transfer count reg. A channel [0..5] */ -#define DBSB(Nb) __REG(0xB0000018 + (Nb)*DMASp) /* DMA Buffer Start address reg. B channel [0..5] */ -#define DBTB(Nb) __REG(0xB000001C + (Nb)*DMASp) /* DMA Buffer Transfer count reg. B channel [0..5] */ - -#define DDAR_RW 0x00000001 /* device data Read/Write */ -#define DDAR_DevWr (DDAR_RW*0) /* Device data Write */ - /* (memory -> device) */ -#define DDAR_DevRd (DDAR_RW*1) /* Device data Read */ - /* (device -> memory) */ -#define DDAR_E 0x00000002 /* big/little Endian device */ -#define DDAR_LtlEnd (DDAR_E*0) /* Little Endian device */ -#define DDAR_BigEnd (DDAR_E*1) /* Big Endian device */ -#define DDAR_BS 0x00000004 /* device Burst Size */ -#define DDAR_Brst4 (DDAR_BS*0) /* Burst-of-4 device */ -#define DDAR_Brst8 (DDAR_BS*1) /* Burst-of-8 device */ -#define DDAR_DW 0x00000008 /* device Data Width */ -#define DDAR_8BitDev (DDAR_DW*0) /* 8-Bit Device */ -#define DDAR_16BitDev (DDAR_DW*1) /* 16-Bit Device */ -#define DDAR_DS Fld (4, 4) /* Device Select */ -#define DDAR_Ser0UDCTr /* Ser. port 0 UDC Transmit */ \ - (0x0 << FShft (DDAR_DS)) -#define DDAR_Ser0UDCRc /* Ser. port 0 UDC Receive */ \ - (0x1 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCTr /* Ser. port 1 SDLC Transmit */ \ - (0x2 << FShft (DDAR_DS)) -#define DDAR_Ser1SDLCRc /* Ser. port 1 SDLC Receive */ \ - (0x3 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTTr /* Ser. port 1 UART Transmit */ \ - (0x4 << FShft (DDAR_DS)) -#define DDAR_Ser1UARTRc /* Ser. port 1 UART Receive */ \ - (0x5 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPTr /* Ser. port 2 ICP Transmit */ \ - (0x6 << FShft (DDAR_DS)) -#define DDAR_Ser2ICPRc /* Ser. port 2 ICP Receive */ \ - (0x7 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTTr /* Ser. port 3 UART Transmit */ \ - (0x8 << FShft (DDAR_DS)) -#define DDAR_Ser3UARTRc /* Ser. port 3 UART Receive */ \ - (0x9 << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Tr /* Ser. port 4 MCP 0 Transmit */ \ - /* (audio) */ \ - (0xA << FShft (DDAR_DS)) -#define DDAR_Ser4MCP0Rc /* Ser. port 4 MCP 0 Receive */ \ - /* (audio) */ \ - (0xB << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Tr /* Ser. port 4 MCP 1 Transmit */ \ - /* (telecom) */ \ - (0xC << FShft (DDAR_DS)) -#define DDAR_Ser4MCP1Rc /* Ser. port 4 MCP 1 Receive */ \ - /* (telecom) */ \ - (0xD << FShft (DDAR_DS)) -#define DDAR_Ser4SSPTr /* Ser. port 4 SSP Transmit */ \ - (0xE << FShft (DDAR_DS)) -#define DDAR_Ser4SSPRc /* Ser. port 4 SSP Receive */ \ - (0xF << FShft (DDAR_DS)) -#define DDAR_DA Fld (24, 8) /* Device Address */ -#define DDAR_DevAdd(Add) /* Device Address */ \ - (((Add) & 0xF0000000) | \ - (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2))) -#define DDAR_Ser0UDCWr /* Ser. port 0 UDC Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser0UDCRd /* Ser. port 0 UDC Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR))) -#define DDAR_Ser1UARTWr /* Ser. port 1 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1UARTRd /* Ser. port 1 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR))) -#define DDAR_Ser1SDLCWr /* Ser. port 1 SDLC Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser1SDLCRd /* Ser. port 1 SDLC Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR))) -#define DDAR_Ser2UARTWr /* Ser. port 2 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2UARTRd /* Ser. port 2 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR))) -#define DDAR_Ser2HSSPWr /* Ser. port 2 HSSP Write */ \ - (DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser2HSSPRd /* Ser. port 2 HSSP Read */ \ - (DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \ - DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR))) -#define DDAR_Ser3UARTWr /* Ser. port 3 UART Write */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser3UARTRd /* Ser. port 3 UART Read */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \ - DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR))) -#define DDAR_Ser4MCP0Wr /* Ser. port 4 MCP 0 Write (audio) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP0Rd /* Ser. port 4 MCP 0 Read (audio) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0))) -#define DDAR_Ser4MCP1Wr /* Ser. port 4 MCP 1 Write */ \ - /* (telecom) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4MCP1Rd /* Ser. port 4 MCP 1 Read */ \ - /* (telecom) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1))) -#define DDAR_Ser4SSPWr /* Ser. port 4 SSP Write (16 bits) */ \ - (DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR))) -#define DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ \ - (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \ - DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR))) - -#define DCSR_RUN 0x00000001 /* DMA RUNing */ -#define DCSR_IE 0x00000002 /* DMA Interrupt Enable */ -#define DCSR_ERROR 0x00000004 /* DMA ERROR */ -#define DCSR_DONEA 0x00000008 /* DONE DMA transfer buffer A */ -#define DCSR_STRTA 0x00000010 /* STaRTed DMA transfer buffer A */ -#define DCSR_DONEB 0x00000020 /* DONE DMA transfer buffer B */ -#define DCSR_STRTB 0x00000040 /* STaRTed DMA transfer buffer B */ -#define DCSR_BIU 0x00000080 /* DMA Buffer In Use */ -#define DCSR_BufA (DCSR_BIU*0) /* DMA Buffer A in use */ -#define DCSR_BufB (DCSR_BIU*1) /* DMA Buffer B in use */ - -#define DBT_TC Fld (13, 0) /* Transfer Count */ -#define DBTA_TCA DBT_TC /* Transfer Count buffer A */ -#define DBTB_TCB DBT_TC /* Transfer Count buffer B */ - - -/* - * Liquid Crystal Display (LCD) control registers - * - * Registers - * LCCR0 Liquid Crystal Display (LCD) Control Register 0 - * (read/write). - * [Bits LDM, BAM, and ERM are only implemented in - * versions 2.0 (rev. = 8) and higher of the StrongARM - * SA-1100.] - * LCSR Liquid Crystal Display (LCD) Status Register - * (read/write). - * [Bit LDD can be only read in versions 1.0 (rev. = 1) - * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be - * read and written (cleared) in versions 2.0 (rev. = 8) - * and higher.] - * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Base Address Register channel 1 (read/write). - * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Current Address Register channel 1 (read). - * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Base Address Register channel 2 (read/write). - * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access - * (DMA) Current Address Register channel 2 (read). - * LCCR1 Liquid Crystal Display (LCD) Control Register 1 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher.] - * LCCR2 Liquid Crystal Display (LCD) Control Register 2 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher.] - * LCCR3 Liquid Crystal Display (LCD) Control Register 3 - * (read/write). - * [The LCCR1 register can be only written in - * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the - * StrongARM SA-1100, it can be written and read in - * versions 2.0 (rev. = 8) and higher. Bit PCP is only - * implemented in versions 2.0 (rev. = 8) and higher of - * the StrongARM SA-1100.] - * - * Clocks - * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). - * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). - * fpix, Tpix Frequency, period of the pixel clock. - * fln, Tln Frequency, period of the line clock. - * fac, Tac Frequency, period of the AC bias clock. - */ - -#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ -#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ - /* [byte] */ \ - (16*LCD_PEntrySp) -#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ - /* [byte] */ \ - (256*LCD_PEntrySp) -#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ - /* dummy-Palette Space [byte] */ \ - (16*LCD_PEntrySp) - -#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ -#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ -#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ -#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ -#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ -#define LCD_4Bit /* LCD 4-Bit pixel mode */ \ - (0 << FShft (LCD_PBS)) -#define LCD_8Bit /* LCD 8-Bit pixel mode */ \ - (1 << FShft (LCD_PBS)) -#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ - (2 << FShft (LCD_PBS)) - -#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ -#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ -#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ -#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ -#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ -#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ -#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ -#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ -#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ -#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ -#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ -#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ -#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ -#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ -#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ -#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ - /* (Alternative) */ - -#define LCCR0 __REG(0xB0100000) /* LCD Control Reg. 0 */ -#define LCSR __REG(0xB0100004) /* LCD Status Reg. */ -#define DBAR1 __REG(0xB0100010) /* LCD DMA Base Address Reg. channel 1 */ -#define DCAR1 __REG(0xB0100014) /* LCD DMA Current Address Reg. channel 1 */ -#define DBAR2 __REG(0xB0100018) /* LCD DMA Base Address Reg. channel 2 */ -#define DCAR2 __REG(0xB010001C) /* LCD DMA Current Address Reg. channel 2 */ -#define LCCR1 __REG(0xB0100020) /* LCD Control Reg. 1 */ -#define LCCR2 __REG(0xB0100024) /* LCD Control Reg. 2 */ -#define LCCR3 __REG(0xB0100028) /* LCD Control Reg. 3 */ - -#define LCCR0_LEN 0x00000001 /* LCD ENable */ -#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ - /* Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ -#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ - /* interrupt Mask (disable) */ -#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ - /* interrupt Mask (disable) */ -#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ - /* IUU, OOL, OUL, OOU, and OUU) */ - /* interrupt Mask (disable) */ -#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ -#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ -#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ -#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ - /* display mode) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ - /* [Tmem] */ -#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ - /* [0..510 Tcpu] */ \ - ((Tcpu)/2 << FShft (LCCR0_PDD)) - -#define LCSR_LDD 0x00000001 /* LCD Disable Done */ -#define LCSR_BAU 0x00000002 /* Base Address Update (read) */ -#define LCSR_BER 0x00000004 /* Bus ERror */ -#define LCSR_ABC 0x00000008 /* AC Bias clock Count */ -#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ - /* panel */ -#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ - /* panel */ -#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ - /* panel */ -#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ - /* panel */ -#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ - /* panel */ -#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ - /* panel */ -#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ - /* panel */ -#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ - /* panel */ - -#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ - (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ - /* pulse Width - 1 [Tpix] (L_LCLK) */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ - /* [1..255] (L_PCLK) */ - /* fpix = fcpu/(2*(PCD + 2)) */ - /* Tpix = 2*(PCD + 2)*Tcpu */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ - (((Div) - 4)/2 << FShft (LCCR3_PCD)) - /* fpix = fcpu/(2*Floor (Div/2)) */ - /* Tpix = 2*Floor (Div/2)*Tcpu */ -#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ - (((Div) - 3)/2 << FShft (LCCR3_PCD)) - /* fpix = fcpu/(2*Ceil (Div/2)) */ - /* Tpix = 2*Ceil (Div/2)*Tcpu */ -#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ - /* [Tln] (L_BIAS) */ -#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ - (((Div) - 2)/2 << FShft (LCCR3_ACB)) - /* fac = fln/(2*Floor (Div/2)) */ - /* Tac = 2*Floor (Div/2)*Tln */ -#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ - (((Div) - 1)/2 << FShft (LCCR3_ACB)) - /* fac = fln/(2*Ceil (Div/2)) */ - /* Tac = 2*Ceil (Div/2)*Tln */ -#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ - /* Interrupt */ -#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ - /* Off */ \ - (0 << FShft (LCCR3_API)) -#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ - /* [1..15] */ \ - ((Trans) << FShft (LCCR3_API)) -#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ - /* Polarity (L_FCLK) */ -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ -#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ - /* pulse Polarity (L_LCLK) */ -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ - /* pulse active Low */ -#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ -#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ - /* active display mode) */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#ifndef __ASSEMBLY__ -extern unsigned int processor_id; -#endif - -#define CPU_REVISION (processor_id & 15) -#define CPU_SA1110_A0 (0) -#define CPU_SA1110_B0 (4) -#define CPU_SA1110_B1 (5) -#define CPU_SA1110_B2 (6) -#define CPU_SA1110_B4 (8) - -#define CPU_SA1100_ID (0x4401a110) -#define CPU_SA1100_MASK (0xfffffff0) -#define CPU_SA1110_ID (0x6901b110) -#define CPU_SA1110_MASK (0xfffffff0) diff --git a/include/asm-arm/arch-sa1100/SA-1101.h b/include/asm-arm/arch-sa1100/SA-1101.h deleted file mode 100644 index 65ca8c79e6d2..000000000000 --- a/include/asm-arm/arch-sa1100/SA-1101.h +++ /dev/null @@ -1,925 +0,0 @@ -/* - * SA-1101.h - * - * Copyright (c) Peter Danielsson 1999 - * - * Definition of constants related to the sa1101 - * support chip for the sa1100 - * - */ - - -/* Be sure that virtual mapping is defined right */ -#ifndef __ASM_ARCH_HARDWARE_H -#error You must include hardware.h not SA-1101.h -#endif - -#ifndef SA1101_BASE -#error You must define SA-1101 physical base address -#endif - -#ifndef LANGUAGE -# ifdef __ASSEMBLY__ -# define LANGUAGE Assembly -# else -# define LANGUAGE C -# endif -#endif - -/* - * We have mapped the sa1101 depending on the value of SA1101_BASE. - * It then appears from 0xf4000000. - */ - -#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000) -#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE) - -#ifndef SA1101_p2v -#define SA1101_p2v(PhAdd) (PhAdd) -#endif - -#include - -#define C 0 -#define Assembly 1 - - -/* - * Memory map - */ - -#define __SHMEM_CONTROL0 0x00000000 -#define __SYSTEM_CONTROL1 0x00000400 -#define __ARBITER 0x00020000 -#define __SYSTEM_CONTROL2 0x00040000 -#define __SYSTEM_CONTROL3 0x00060000 -#define __PARALLEL_PORT 0x00080000 -#define __VIDMEM_CONTROL 0x00100000 -#define __UPDATE_FIFO 0x00120000 -#define __SHMEM_CONTROL1 0x00140000 -#define __INTERRUPT_CONTROL 0x00160000 -#define __USB_CONTROL 0x00180000 -#define __TRACK_INTERFACE 0x001a0000 -#define __MOUSE_INTERFACE 0x001b0000 -#define __KEYPAD_INTERFACE 0x001c0000 -#define __PCMCIA_INTERFACE 0x001e0000 -#define __VGA_CONTROL 0x00200000 -#define __GPIO_INTERFACE 0x00300000 - -/* - * Macro that calculates real address for registers in the SA-1101 - */ - -#define _SA1101( x ) ((x) + SA1101_BASE) - -/* - * Interface and shared memory controller registers - * - * Registers - * SKCR SA-1101 control register (read/write) - * SMCR Shared Memory Controller Register - * SNPR Snoop Register - */ - -#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */ -#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */ -#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */ - -#if LANGUAGE == C -#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR))) -#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR))) -#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR))) - -#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */ -#define SKCR_BCLKEn 0x0002 /* Enables BCLK */ -#define SKCR_Sleep 0x0004 /* Sleep Mode */ -#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */ -#define SKCR_VCOON 0x0010 /* VCO bias */ -#define SKCR_ScanTestEn 0x0020 /* Enables scan test */ -#define SKCR_ClockTestEn 0x0040 /* Enables clock test */ - -#define SMCR_DCAC Fld(2,0) /* Number of column address bits */ -#define SMCR_DRAC Fld(2,2) /* Number of row address bits */ -#define SMCR_ArbiterBias 0x0008 /* favor video or USB */ -#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */ - -#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \ - (( (x) - 8 ) << FShft (SMCR_DCAC)) -#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\ - (( (x) - 9 ) << FShft (SMCR_DRAC)) - -#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */ -#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */ -#define SNPR_WholeBank (1 << 23) /* Whole bank bit */ -#define SNPR_BankSelect Fld(2,27) /* Bank select */ -#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */ - -#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \ - ( (x) << FShft (SNPR_VFBsize)) -#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \ - (( (x) + 1 ) << FShft (SNPR_BankSelect )) - -#endif /* LANGUAGE == C */ - -/* - * Video Memory Controller - * - * Registers - * VMCCR Configuration register - * VMCAR VMC address register - * VMCDR VMC data register - * - */ - -#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */ -#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */ -#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */ - -#if LANGUAGE == C -#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR))) -#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR))) -#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR))) - -#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */ -#define VMCCR_Config 0x0001 /* DRAM size */ -#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */ -#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */ -#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/ -#define VMCCR_RefTest (1<<10) /* refresh test */ -#define VMCCR_RefLow Fld(6,11) /* refresh low counter */ -#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */ -#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */ -#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */ - -#endif LANGUAGE == C - - -/* Update FIFO - * - * Registers - * UFCR Update FIFO Control Register - * UFSR Update FIFO Status Register - * UFLVLR update FIFO level register - * UFDR update FIFO data register - */ - -#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */ -#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */ -#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */ -#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */ - -#if LANGUAGE == C - -#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR))) -#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR))) -#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR))) -#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR))) - - -#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */ - -#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */ - -#endif /* LANGUAGE == C */ - -/* System Controller - * - * Registers - * SKPCR Power Control Register - * SKCDR Clock Divider Register - * DACDR1 DAC1 Data register - * DACDR2 DAC2 Data register - */ - -#define _SKPCR _SA1101(0x00000400) -#define _SKCDR _SA1101(0x00040000) -#define _DACDR1 _SA1101(0x00060000) -#define _DACDR2 _SA1101(0x00060400) - -#if LANGUAGE == C -#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR))) -#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR))) -#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1))) -#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2))) - -#define SKPCR_UCLKEn 0x01 /* USB Enable */ -#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */ -#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */ -#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */ -#define SKPCR_PICLKEn 0x10 /* parallel port Enable */ -#define SKPCR_DCLKEn 0x20 /* DACs Enable */ -#define SKPCR_nKPADEn 0x40 /* Multiplexer */ - -#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */ -#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */ -#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */ -#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */ -#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */ -#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */ -#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */ -#define SKDCR_ChargePump (1<<25) /* Charge pump control */ -#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */ -#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */ -#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */ - -#define DACDR_DACCount Fld(8,0) /* Count value */ -#define DACDR1_DACCount DACDR_DACCount -#define DACDR2_DACCount DACDR_DACCount - -#endif /* LANGUAGE == C */ - -/* - * Parallel Port Interface - * - * Registers - * IEEE_Config IEEE mode selection and programmable attributes - * IEEE_Control Controls the states of IEEE port control outputs - * IEEE_Data Forward transfer data register - * IEEE_Addr Forward transfer address register - * IEEE_Status Port IO signal status register - * IEEE_IntStatus Port interrupts status register - * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels - * IEEE_InitTime Forward timeout counter initial value - * IEEE_TimerStatus Forward timeout counter current value - * IEEE_FifoReset Reset forward transfer FIFO - * IEEE_ReloadValue Counter reload value - * IEEE_TestControl Control testmode - * IEEE_TestDataIn Test data register - * IEEE_TestDataInEn Enable test data - * IEEE_TestCtrlIn Test control signals - * IEEE_TestCtrlInEn Enable test control signals - * IEEE_TestDataStat Current data bus value - * - */ - -/* - * The control registers are defined as offsets from a base address - */ - -#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT ) - -#define _IEEE_Config _IEEE( 0x0000 ) -#define _IEEE_Control _IEEE( 0x0400 ) -#define _IEEE_Data _IEEE( 0x4000 ) -#define _IEEE_Addr _IEEE( 0x0800 ) -#define _IEEE_Status _IEEE( 0x0c00 ) -#define _IEEE_IntStatus _IEEE( 0x1000 ) -#define _IEEE_FifoLevels _IEEE( 0x1400 ) -#define _IEEE_InitTime _IEEE( 0x1800 ) -#define _IEEE_TimerStatus _IEEE( 0x1c00 ) -#define _IEEE_FifoReset _IEEE( 0x2000 ) -#define _IEEE_ReloadValue _IEEE( 0x3c00 ) -#define _IEEE_TestControl _IEEE( 0x2400 ) -#define _IEEE_TestDataIn _IEEE( 0x2800 ) -#define _IEEE_TestDataInEn _IEEE( 0x2c00 ) -#define _IEEE_TestCtrlIn _IEEE( 0x3000 ) -#define _IEEE_TestCtrlInEn _IEEE( 0x3400 ) -#define _IEEE_TestDataStat _IEEE( 0x3800 ) - - -#if LANGUAGE == C -#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config))) -#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control))) -#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data))) -#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr))) -#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status))) -#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus))) -#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels))) -#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime))) -#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus))) -#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset))) -#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue))) -#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl))) -#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn))) -#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn))) -#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn))) -#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn))) -#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat))) - - -#define IEEE_Config_M Fld(3,0) /* Mode select */ -#define IEEE_Config_D 0x04 /* FIFO access enable */ -#define IEEE_Config_B 0x08 /* 9-bit word enable */ -#define IEEE_Config_T 0x10 /* Data transfer enable */ -#define IEEE_Config_A 0x20 /* Data transfer direction */ -#define IEEE_Config_E 0x40 /* Timer enable */ -#define IEEE_Control_A 0x08 /* AutoFd output */ -#define IEEE_Control_E 0x04 /* Selectin output */ -#define IEEE_Control_T 0x02 /* Strobe output */ -#define IEEE_Control_I 0x01 /* Port init output */ -#define IEEE_Data_C (1<<31) /* Byte count */ -#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */ -#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */ -#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */ -#define IEEE_Status_A 0x0100 /* nAutoFd port output status */ -#define IEEE_Status_E 0x0080 /* nSelectIn port output status */ -#define IEEE_Status_T 0x0040 /* nStrobe port output status */ -#define IEEE_Status_I 0x0020 /* nInit port output status */ -#define IEEE_Status_B 0x0010 /* Busy port inout status */ -#define IEEE_Status_S 0x0008 /* Select port input status */ -#define IEEE_Status_K 0x0004 /* nAck port input status */ -#define IEEE_Status_F 0x0002 /* nFault port input status */ -#define IEEE_Status_R 0x0001 /* pError port input status */ - -#define IEEE_IntStatus_IntReqDat 0x0100 -#define IEEE_IntStatus_IntReqEmp 0x0080 -#define IEEE_IntStatus_IntReqInt 0x0040 -#define IEEE_IntStatus_IntReqRav 0x0020 -#define IEEE_IntStatus_IntReqTim 0x0010 -#define IEEE_IntStatus_RevAddrComp 0x0008 -#define IEEE_IntStatus_RevDataComp 0x0004 -#define IEEE_IntStatus_FwdAddrComp 0x0002 -#define IEEE_IntStatus_FwdDataComp 0x0001 -#define IEEE_FifoLevels_RevFifoLevel 2 -#define IEEE_FifoLevels_FwdFifoLevel 1 -#define IEEE_InitTime_TimValInit Fld(22,0) -#define IEEE_TimerStatus_TimValStat Fld(22,0) -#define IEEE_ReloadValue_Reload Fld(4,0) - -#define IEEE_TestControl_RegClk 0x04 -#define IEEE_TestControl_ClockSelect Fld(2,1) -#define IEEE_TestControl_TimerTestModeEn 0x01 -#define IEEE_TestCtrlIn_PError 0x10 -#define IEEE_TestCtrlIn_nFault 0x08 -#define IEEE_TestCtrlIn_nAck 0x04 -#define IEEE_TestCtrlIn_PSel 0x02 -#define IEEE_TestCtrlIn_Busy 0x01 - -#endif /* LANGUAGE == C */ - -/* - * VGA Controller - * - * Registers - * VideoControl Video Control Register - * VgaTiming0 VGA Timing Register 0 - * VgaTiming1 VGA Timing Register 1 - * VgaTiming2 VGA Timing Register 2 - * VgaTiming3 VGA Timing Register 3 - * VgaBorder VGA Border Color Register - * VgaDBAR VGADMA Base Address Register - * VgaDCAR VGADMA Channel Current Address Register - * VgaStatus VGA Status Register - * VgaInterruptMask VGA Interrupt Mask Register - * VgaPalette VGA Palette Registers - * DacControl DAC Control Register - * VgaTest VGA Controller Test Register - */ - -#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL ) - -#define _VideoControl _VGA( 0x0000 ) -#define _VgaTiming0 _VGA( 0x0400 ) -#define _VgaTiming1 _VGA( 0x0800 ) -#define _VgaTiming2 _VGA( 0x0c00 ) -#define _VgaTiming3 _VGA( 0x1000 ) -#define _VgaBorder _VGA( 0x1400 ) -#define _VgaDBAR _VGA( 0x1800 ) -#define _VgaDCAR _VGA( 0x1c00 ) -#define _VgaStatus _VGA( 0x2000 ) -#define _VgaInterruptMask _VGA( 0x2400 ) -#define _VgaPalette _VGA( 0x40000 ) -#define _DacControl _VGA( 0x3000 ) -#define _VgaTest _VGA( 0x2c00 ) - -#if (LANGUAGE == C) -#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl))) -#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0))) -#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1))) -#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2))) -#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3))) -#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder))) -#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR))) -#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR))) -#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus))) -#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask))) -#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette))) -#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl))) -#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest))) - -#define VideoControl_VgaEn 0x00000000 -#define VideoControl_BGR 0x00000001 -#define VideoControl_VCompVal Fld(2,2) -#define VideoControl_VgaReq Fld(4,4) -#define VideoControl_VBurstL Fld(4,8) -#define VideoControl_VMode (1<<12) -#define VideoControl_PalRead (1<<13) - -#define VgaTiming0_PPL Fld(6,2) -#define VgaTiming0_HSW Fld(8,8) -#define VgaTiming0_HFP Fld(8,16) -#define VgaTiming0_HBP Fld(8,24) - -#define VgaTiming1_LPS Fld(10,0) -#define VgaTiming1_VSW Fld(6,10) -#define VgaTiming1_VFP Fld(8,16) -#define VgaTiming1_VBP Fld(8,24) - -#define VgaTiming2_IVS 0x01 -#define VgaTiming2_IHS 0x02 -#define VgaTiming2_CVS 0x04 -#define VgaTiming2_CHS 0x08 - -#define VgaTiming3_HBS Fld(8,0) -#define VgaTiming3_HBE Fld(8,8) -#define VgaTiming3_VBS Fld(8,16) -#define VgaTiming3_VBE Fld(8,24) - -#define VgaBorder_BCOL Fld(24,0) - -#define VgaStatus_VFUF 0x01 -#define VgaStatus_VNext 0x02 -#define VgaStatus_VComp 0x04 - -#define VgaInterruptMask_VFUFMask 0x00 -#define VgaInterruptMask_VNextMask 0x01 -#define VgaInterruptMask_VCompMask 0x02 - -#define VgaPalette_R Fld(8,0) -#define VgaPalette_G Fld(8,8) -#define VgaPalette_B Fld(8,16) - -#define DacControl_DACON 0x0001 -#define DacControl_COMPON 0x0002 -#define DacControl_PEDON 0x0004 -#define DacControl_RTrim Fld(5,4) -#define DacControl_GTrim Fld(5,9) -#define DacControl_BTrim Fld(5,14) - -#define VgaTest_TDAC 0x00 -#define VgaTest_Datatest Fld(4,1) -#define VgaTest_DACTESTDAC 0x10 -#define VgaTest_DACTESTOUT Fld(3,5) - -#endif /* LANGUAGE == C */ - -/* - * USB Host Interface Controller - * - * Registers - * Revision - * Control - * CommandStatus - * InterruptStatus - * InterruptEnable - * HCCA - * PeriodCurrentED - * ControlHeadED - * BulkHeadED - * BulkCurrentED - * DoneHead - * FmInterval - * FmRemaining - * FmNumber - * PeriodicStart - * LSThreshold - * RhDescriptorA - * RhDescriptorB - * RhStatus - * RhPortStatus - * USBStatus - * USBReset - * USTAR - * USWER - * USRFR - * USNFR - * USTCSR - * USSR - * - */ - -#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL ) - - -#define _Revision _USB( 0x0000 ) -#define _Control _USB( 0x0888 ) -#define _CommandStatus _USB( 0x0c00 ) -#define _InterruptStatus _USB( 0x1000 ) -#define _InterruptEnable _USB( 0x1400 ) -#define _HCCA _USB( 0x1800 ) -#define _PeriodCurrentED _USB( 0x1c00 ) -#define _ControlHeadED _USB( 0x2000 ) -#define _BulkHeadED _USB( 0x2800 ) -#define _BulkCurrentED _USB( 0x2c00 ) -#define _DoneHead _USB( 0x3000 ) -#define _FmInterval _USB( 0x3400 ) -#define _FmRemaining _USB( 0x3800 ) -#define _FmNumber _USB( 0x3c00 ) -#define _PeriodicStart _USB( 0x4000 ) -#define _LSThreshold _USB( 0x4400 ) -#define _RhDescriptorA _USB( 0x4800 ) -#define _RhDescriptorB _USB( 0x4c00 ) -#define _RhStatus _USB( 0x5000 ) -#define _RhPortStatus _USB( 0x5400 ) -#define _USBStatus _USB( 0x11800 ) -#define _USBReset _USB( 0x11c00 ) - -#define _USTAR _USB( 0x10400 ) -#define _USWER _USB( 0x10800 ) -#define _USRFR _USB( 0x10c00 ) -#define _USNFR _USB( 0x11000 ) -#define _USTCSR _USB( 0x11400 ) -#define _USSR _USB( 0x11800 ) - - -#if (LANGUAGE == C) - -#define Revision (*((volatile Word *) SA1101_p2v (_Revision))) -#define Control (*((volatile Word *) SA1101_p2v (_Control))) -#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus))) -#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus))) -#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable))) -#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA))) -#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED))) -#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED))) -#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED))) -#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED))) -#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead))) -#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval))) -#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining))) -#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber))) -#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart))) -#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold))) -#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA))) -#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB))) -#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus))) -#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus))) -#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus))) -#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset))) -#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR))) -#define USWER (*((volatile Word *) SA1101_p2v (_USWER))) -#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR))) -#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR))) -#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR))) -#define USSR (*((volatile Word *) SA1101_p2v (_USSR))) - - -#define USBStatus_IrqHciRmtWkp (1<<7) -#define USBStatus_IrqHciBuffAcc (1<<8) -#define USBStatus_nIrqHciM (1<<9) -#define USBStatus_nHciMFClr (1<<10) - -#define USBReset_ForceIfReset 0x01 -#define USBReset_ForceHcReset 0x02 -#define USBReset_ClkGenReset 0x04 - -#define USTCR_RdBstCntrl Fld(3,0) -#define USTCR_ByteEnable Fld(4,3) -#define USTCR_WriteEn (1<<7) -#define USTCR_FifoCir (1<<8) -#define USTCR_TestXferSel (1<<9) -#define USTCR_FifoCirAtEnd (1<<10) -#define USTCR_nSimScaleDownClk (1<<11) - -#define USSR_nAppMDEmpty 0x01 -#define USSR_nAppMDFirst 0x02 -#define USSR_nAppMDLast 0x04 -#define USSR_nAppMDFull 0x08 -#define USSR_nAppMAFull 0x10 -#define USSR_XferReq 0x20 -#define USSR_XferEnd 0x40 - -#endif /* LANGUAGE == C */ - - -/* - * Interrupt Controller - * - * Registers - * INTTEST0 Test register 0 - * INTTEST1 Test register 1 - * INTENABLE0 Interrupt Enable register 0 - * INTENABLE1 Interrupt Enable register 1 - * INTPOL0 Interrupt Polarity selection 0 - * INTPOL1 Interrupt Polarity selection 1 - * INTTSTSEL Interrupt source selection - * INTSTATCLR0 Interrupt Status 0 - * INTSTATCLR1 Interrupt Status 1 - * INTSET0 Interrupt Set 0 - * INTSET1 Interrupt Set 1 - */ - -#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL) - -#define _INTTEST0 _INT( 0x1000 ) -#define _INTTEST1 _INT( 0x1400 ) -#define _INTENABLE0 _INT( 0x2000 ) -#define _INTENABLE1 _INT( 0x2400 ) -#define _INTPOL0 _INT( 0x3000 ) -#define _INTPOL1 _INT( 0x3400 ) -#define _INTTSTSEL _INT( 0x5000 ) -#define _INTSTATCLR0 _INT( 0x6000 ) -#define _INTSTATCLR1 _INT( 0x6400 ) -#define _INTSET0 _INT( 0x7000 ) -#define _INTSET1 _INT( 0x7400 ) - -#if ( LANGUAGE == C ) -#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0))) -#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1))) -#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0))) -#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1))) -#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0))) -#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1))) -#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL))) -#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0))) -#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1))) -#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0))) -#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1))) - -#endif /* LANGUAGE == C */ - -/* - * PS/2 Trackpad and Mouse Interfaces - * - * Registers (prefix kbd applies to trackpad interface, mse to mouse) - * KBDCR Control Register - * KBDSTAT Status Register - * KBDDATA Transmit/Receive Data register - * KBDCLKDIV Clock Division Register - * KBDPRECNT Clock Precount Register - * KBDTEST1 Test register 1 - * KBDTEST2 Test register 2 - * KBDTEST3 Test register 3 - * KBDTEST4 Test register 4 - * MSECR - * MSESTAT - * MSEDATA - * MSECLKDIV - * MSEPRECNT - * MSETEST1 - * MSETEST2 - * MSETEST3 - * MSETEST4 - * - */ - -#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE ) -#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE ) - -#define _KBDCR _KBD( 0x0000 ) -#define _KBDSTAT _KBD( 0x0400 ) -#define _KBDDATA _KBD( 0x0800 ) -#define _KBDCLKDIV _KBD( 0x0c00 ) -#define _KBDPRECNT _KBD( 0x1000 ) -#define _KBDTEST1 _KBD( 0x2000 ) -#define _KBDTEST2 _KBD( 0x2400 ) -#define _KBDTEST3 _KBD( 0x2800 ) -#define _KBDTEST4 _KBD( 0x2c00 ) -#define _MSECR _MSE( 0x0000 ) -#define _MSESTAT _MSE( 0x0400 ) -#define _MSEDATA _MSE( 0x0800 ) -#define _MSECLKDIV _MSE( 0x0c00 ) -#define _MSEPRECNT _MSE( 0x1000 ) -#define _MSETEST1 _MSE( 0x2000 ) -#define _MSETEST2 _MSE( 0x2400 ) -#define _MSETEST3 _MSE( 0x2800 ) -#define _MSETEST4 _MSE( 0x2c00 ) - -#if ( LANGUAGE == C ) - -#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR))) -#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT))) -#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA))) -#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV))) -#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT))) -#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1))) -#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2))) -#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3))) -#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4))) -#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR))) -#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT))) -#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA))) -#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV))) -#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT))) -#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1))) -#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2))) -#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3))) -#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4))) - - -#define KBDCR_ENA 0x08 -#define KBDCR_FKD 0x02 -#define KBDCR_FKC 0x01 - -#define KBDSTAT_TXE 0x80 -#define KBDSTAT_TXB 0x40 -#define KBDSTAT_RXF 0x20 -#define KBDSTAT_RXB 0x10 -#define KBDSTAT_ENA 0x08 -#define KBDSTAT_RXP 0x04 -#define KBDSTAT_KBD 0x02 -#define KBDSTAT_KBC 0x01 - -#define KBDCLKDIV_DivVal Fld(4,0) - -#define MSECR_ENA 0x08 -#define MSECR_FKD 0x02 -#define MSECR_FKC 0x01 - -#define MSESTAT_TXE 0x80 -#define MSESTAT_TXB 0x40 -#define MSESTAT_RXF 0x20 -#define MSESTAT_RXB 0x10 -#define MSESTAT_ENA 0x08 -#define MSESTAT_RXP 0x04 -#define MSESTAT_MSD 0x02 -#define MSESTAT_MSC 0x01 - -#define MSECLKDIV_DivVal Fld(4,0) - -#define KBDTEST1_CD 0x80 -#define KBDTEST1_RC1 0x40 -#define KBDTEST1_MC 0x20 -#define KBDTEST1_C Fld(2,3) -#define KBDTEST1_T2 0x40 -#define KBDTEST1_T1 0x20 -#define KBDTEST1_T0 0x10 -#define KBDTEST2_TICBnRES 0x08 -#define KBDTEST2_RKC 0x04 -#define KBDTEST2_RKD 0x02 -#define KBDTEST2_SEL 0x01 -#define KBDTEST3_ms_16 0x80 -#define KBDTEST3_us_64 0x40 -#define KBDTEST3_us_16 0x20 -#define KBDTEST3_DIV8 0x10 -#define KBDTEST3_DIn 0x08 -#define KBDTEST3_CIn 0x04 -#define KBDTEST3_KD 0x02 -#define KBDTEST3_KC 0x01 -#define KBDTEST4_BC12 0x80 -#define KBDTEST4_BC11 0x40 -#define KBDTEST4_TRES 0x20 -#define KBDTEST4_CLKOE 0x10 -#define KBDTEST4_CRES 0x08 -#define KBDTEST4_RXB 0x04 -#define KBDTEST4_TXB 0x02 -#define KBDTEST4_SRX 0x01 - -#define MSETEST1_CD 0x80 -#define MSETEST1_RC1 0x40 -#define MSETEST1_MC 0x20 -#define MSETEST1_C Fld(2,3) -#define MSETEST1_T2 0x40 -#define MSETEST1_T1 0x20 -#define MSETEST1_T0 0x10 -#define MSETEST2_TICBnRES 0x08 -#define MSETEST2_RKC 0x04 -#define MSETEST2_RKD 0x02 -#define MSETEST2_SEL 0x01 -#define MSETEST3_ms_16 0x80 -#define MSETEST3_us_64 0x40 -#define MSETEST3_us_16 0x20 -#define MSETEST3_DIV8 0x10 -#define MSETEST3_DIn 0x08 -#define MSETEST3_CIn 0x04 -#define MSETEST3_KD 0x02 -#define MSETEST3_KC 0x01 -#define MSETEST4_BC12 0x80 -#define MSETEST4_BC11 0x40 -#define MSETEST4_TRES 0x20 -#define MSETEST4_CLKOE 0x10 -#define MSETEST4_CRES 0x08 -#define MSETEST4_RXB 0x04 -#define MSETEST4_TXB 0x02 -#define MSETEST4_SRX 0x01 - -#endif /* LANGUAGE == C */ - - -/* - * General-Purpose I/O Interface - * - * Registers - * PADWR Port A Data Write Register - * PBDWR Port B Data Write Register - * PADRR Port A Data Read Register - * PBDRR Port B Data Read Register - * PADDR Port A Data Direction Register - * PBDDR Port B Data Direction Register - * PASSR Port A Sleep State Register - * PBSSR Port B Sleep State Register - * - */ - -#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE ) - -#define _PADWR _PIO( 0x0000 ) -#define _PBDWR _PIO( 0x0400 ) -#define _PADRR _PIO( 0x0000 ) -#define _PBDRR _PIO( 0x0400 ) -#define _PADDR _PIO( 0x0800 ) -#define _PBDDR _PIO( 0x0c00 ) -#define _PASSR _PIO( 0x1000 ) -#define _PBSSR _PIO( 0x1400 ) - - -#if ( LANGUAGE == C ) - - -#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR))) -#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR))) -#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR))) -#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR))) -#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR))) -#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR))) -#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR))) -#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR))) - -#endif - - - -/* - * Keypad Interface - * - * Registers - * PXDWR - * PXDRR - * PYDWR - * PYDRR - * - */ - -#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE ) - -#define _PXDWR _KEYPAD( 0x0000 ) -#define _PXDRR _KEYPAD( 0x0000 ) -#define _PYDWR _KEYPAD( 0x0400 ) -#define _PYDRR _KEYPAD( 0x0400 ) - -#if ( LANGUAGE == C ) - - -#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR))) -#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR))) -#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR))) -#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR))) - -#endif - - - -/* - * PCMCIA Interface - * - * Registers - * PCSR Status Register - * PCCR Control Register - * PCSSR Sleep State Register - * - */ - -#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE ) - -#define _PCSR _CARD( 0x0000 ) -#define _PCCR _CARD( 0x0400 ) -#define _PCSSR _CARD( 0x0800 ) - -#if ( LANGUAGE == C ) -#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR))) -#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR))) -#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR))) - -#define PCSR_S0_ready 0x0001 -#define PCSR_S1_ready 0x0002 -#define PCSR_S0_detected 0x0004 -#define PCSR_S1_detected 0x0008 -#define PCSR_S0_VS1 0x0010 -#define PCSR_S0_VS2 0x0020 -#define PCSR_S1_VS1 0x0040 -#define PCSR_S1_VS2 0x0080 -#define PCSR_S0_WP 0x0100 -#define PCSR_S1_WP 0x0200 -#define PCSR_S0_BVD1_nSTSCHG 0x0400 -#define PCSR_S0_BVD2_nSPKR 0x0800 -#define PCSR_S1_BVD1_nSTSCHG 0x1000 -#define PCSR_S1_BVD2_nSPKR 0x2000 - -#define PCCR_S0_VPP0 0x0001 -#define PCCR_S0_VPP1 0x0002 -#define PCCR_S0_VCC0 0x0004 -#define PCCR_S0_VCC1 0x0008 -#define PCCR_S1_VPP0 0x0010 -#define PCCR_S1_VPP1 0x0020 -#define PCCR_S1_VCC0 0x0040 -#define PCCR_S1_VCC1 0x0080 -#define PCCR_S0_reset 0x0100 -#define PCCR_S1_reset 0x0200 -#define PCCR_S0_float 0x0400 -#define PCCR_S1_float 0x0800 - -#define PCSSR_S0_VCC0 0x0001 -#define PCSSR_S0_VCC1 0x0002 -#define PCSSR_S0_VPP0 0x0004 -#define PCSSR_S0_VPP1 0x0008 -#define PCSSR_S0_control 0x0010 -#define PCSSR_S1_VCC0 0x0020 -#define PCSSR_S1_VCC1 0x0040 -#define PCSSR_S1_VPP0 0x0080 -#define PCSSR_S1_VPP1 0x0100 -#define PCSSR_S1_control 0x0200 - -#endif - -#undef C -#undef Assembly diff --git a/include/asm-arm/arch-sa1100/SA-1111.h b/include/asm-arm/arch-sa1100/SA-1111.h deleted file mode 100644 index c38f60915cb6..000000000000 --- a/include/asm-arm/arch-sa1100/SA-1111.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * Moved to new location - */ -#warning using old SA-1111.h - update to -#include diff --git a/include/asm-arm/arch-sa1100/assabet.h b/include/asm-arm/arch-sa1100/assabet.h deleted file mode 100644 index d6a1bb5b4944..000000000000 --- a/include/asm-arm/arch-sa1100/assabet.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/assabet.h - * - * Created 2000/06/05 by Nicolas Pitre - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * 2000/05/23 John Dorsey - * Definitions for Neponset added. - */ -#ifndef __ASM_ARCH_ASSABET_H -#define __ASM_ARCH_ASSABET_H - - -/* System Configuration Register flags */ - -#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */ -#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */ -#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */ -#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */ -#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */ -#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */ - -#define ASSABET_SCR_INIT -1 - -extern unsigned long SCR_value; - -#ifdef CONFIG_ASSABET_NEPONSET -#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0) -#else -#define machine_has_neponset() (0) -#endif - -/* Board Control Register */ - -#define ASSABET_BCR_BASE 0xf1000000 -#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE)) - -#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */ -#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */ -#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ -#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ -#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */ -#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */ -#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */ -#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */ -#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */ -#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */ -#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */ -#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */ -#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */ -#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */ -#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */ -#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */ -#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */ -#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */ -#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */ -#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */ -#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */ -#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */ -#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */ -#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */ -#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */ - -#ifdef CONFIG_SA1100_ASSABET -extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); -#else -#define ASSABET_BCR_frob(x,y) do { } while (0) -#endif - -#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x)) -#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0) - -#define ASSABET_BSR_BASE 0xf1000000 -#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE)) - -#define ASSABET_BSR_RS232_VALID (1 << 24) -#define ASSABET_BSR_COM_DCD (1 << 25) -#define ASSABET_BSR_COM_CTS (1 << 26) -#define ASSABET_BSR_COM_DSR (1 << 27) -#define ASSABET_BSR_RAD_CTS (1 << 28) -#define ASSABET_BSR_RAD_DSR (1 << 29) -#define ASSABET_BSR_RAD_DCD (1 << 30) -#define ASSABET_BSR_RAD_RI (1 << 31) - - -/* GPIOs for which the generic definition doesn't say much */ -#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */ -#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */ -#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */ -#define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */ -#define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */ -#define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */ -#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */ -#define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */ -#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */ -#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */ - -#define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21 -#define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24 -#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25 - -#endif diff --git a/include/asm-arm/arch-sa1100/badge4.h b/include/asm-arm/arch-sa1100/badge4.h deleted file mode 100644 index d93a9a83b25d..000000000000 --- a/include/asm-arm/arch-sa1100/badge4.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/badge4.h - * - * Tim Connors - * Christopher Hoover - * - * Copyright (C) 2002 Hewlett-Packard Company - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#error "include instead" -#endif - -#define BADGE4_SA1111_BASE (0x48000000) - -/* GPIOs on the BadgePAD 4 */ -#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */ - -#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */ -#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */ -#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */ -#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */ -#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */ -#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */ -#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */ -#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */ -#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */ -#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */ -#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */ -#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */ - -#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13 -#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14 - -#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15 -#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16 - -#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */ -#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */ -#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */ -#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */ - -#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */ -#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */ - -#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23 - -#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */ - -#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */ - -#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26 - -#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */ - -/* Interrupts on the BadgePAD 4 */ -#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */ - - -/* PCM5ENV Usage tracking */ - -#define BADGE4_5V_PCMCIA_SOCK0 (1<<0) -#define BADGE4_5V_PCMCIA_SOCK1 (1<<1) -#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n)) -#define BADGE4_5V_USB (1<<2) -#define BADGE4_5V_INITIALLY (1<<3) - -#ifndef __ASSEMBLY__ -extern void badge4_set_5V(unsigned subsystem, int on); -#endif diff --git a/include/asm-arm/arch-sa1100/bitfield.h b/include/asm-arm/arch-sa1100/bitfield.h deleted file mode 100644 index f1f0e3387d9c..000000000000 --- a/include/asm-arm/arch-sa1100/bitfield.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/include/asm-arm/arch-sa1100/cerf.h b/include/asm-arm/arch-sa1100/cerf.h deleted file mode 100644 index 9a19c3d07c1e..000000000000 --- a/include/asm-arm/arch-sa1100/cerf.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/cerf.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Apr-2003 : Removed some old PDA crud [FB] - */ -#ifndef _INCLUDE_CERF_H_ -#define _INCLUDE_CERF_H_ - - -#define CERF_ETH_IO 0xf0000000 -#define CERF_ETH_IRQ IRQ_GPIO26 - -#define CERF_GPIO_CF_BVD2 GPIO_GPIO (19) -#define CERF_GPIO_CF_BVD1 GPIO_GPIO (20) -#define CERF_GPIO_CF_RESET GPIO_GPIO (21) -#define CERF_GPIO_CF_IRQ GPIO_GPIO (22) -#define CERF_GPIO_CF_CD GPIO_GPIO (23) - -#define CERF_IRQ_GPIO_CF_BVD2 IRQ_GPIO19 -#define CERF_IRQ_GPIO_CF_BVD1 IRQ_GPIO20 -#define CERF_IRQ_GPIO_CF_IRQ IRQ_GPIO22 -#define CERF_IRQ_GPIO_CF_CD IRQ_GPIO23 - -#endif // _INCLUDE_CERF_H_ diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h deleted file mode 100644 index 762eba535813..000000000000 --- a/include/asm-arm/arch-sa1100/collie.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/collie.h - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * ChangeLog: - * 04-06-2001 Lineo Japan, Inc. - * 04-16-2001 SHARP Corporation - * 07-07-2002 Chris Larson - * - */ -#ifndef __ASM_ARCH_COLLIE_H -#define __ASM_ARCH_COLLIE_H - - -#define COLLIE_SCP_CHARGE_ON SCOOP_GPCR_PA11 -#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12 -#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13 -#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14 -#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15 -#define COLLIE_SCP_5VON SCOOP_GPCR_PA16 -#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17 -#define COLLIE_SCP_VPEN SCOOP_GPCR_PA18 -#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19 - -#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \ - COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \ - COLLIE_SCP_LB_VOL_CHG ) -#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \ - COLLIE_SCP_CHARGE_ON ) - -/* GPIOs for which the generic definition doesn't say much */ - -#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0) -#define COLLIE_GPIO_AC_IN GPIO_GPIO (1) -#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11) -#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14) -#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15) -#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16) -#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17) -#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18) -#define COLLIE_GPIO_CO GPIO_GPIO (20) -#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21) -#define COLLIE_GPIO_CF_CD GPIO_GPIO (22) -#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23) -#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24) -#define COLLIE_GPIO_GA_INT GPIO_GPIO (25) -#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26) - -/* Interrupts */ - -#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0 -#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1 -#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11 -#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14 -#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15 -#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20 -#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22 -#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23 -#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24 -#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25 -#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26 - -#define COLLIE_LCM_IRQ_GPIO_RTS IRQ_LOCOMO_GPIO0 -#define COLLIE_LCM_IRQ_GPIO_CTS IRQ_LOCOMO_GPIO1 -#define COLLIE_LCM_IRQ_GPIO_DSR IRQ_LOCOMO_GPIO2 -#define COLLIE_LCM_IRQ_GPIO_DTR IRQ_LOCOMO_GPIO3 -#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT IRQ_LOCOMO_GPIO13 -#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14 - -/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */ -#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */ -#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */ -#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */ -#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */ -#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */ -#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */ -#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */ -#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */ -#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */ -#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */ -#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */ -#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 ) -#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \ - UCB_IO_7 | UCB_IO_8 | UCB_IO_9 ) - -#endif diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S deleted file mode 100644 index 1b7753654bd4..000000000000 --- a/include/asm-arm/arch-sa1100/debug-macro.S +++ /dev/null @@ -1,58 +0,0 @@ -/* linux/include/asm-arm/arch-sa1100/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ -#include - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - movne \rx, #0xf8000000 @ virtual address - - @ We probe for the active serial port here, coherently with - @ the comment in include/asm-arm/arch-sa1100/uncompress.h. - @ We assume r1 can be clobbered. - - @ see if Ser3 is active - add \rx, \rx, #0x00050000 - ldr r1, [\rx, #UTCR3] - tst r1, #UTCR3_TXE - - @ if Ser3 is inactive, then try Ser1 - addeq \rx, \rx, #(0x00010000 - 0x00050000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE - - @ if Ser1 is inactive, then try Ser2 - addeq \rx, \rx, #(0x00030000 - 0x00010000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE - - @ if all ports are inactive, then there is nothing we can do - moveq pc, lr - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #UTDR] - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TNF - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #UTSR1] - tst \rd, #UTSR1_TBY - bne 1001b - .endm diff --git a/include/asm-arm/arch-sa1100/dma.h b/include/asm-arm/arch-sa1100/dma.h deleted file mode 100644 index 6b7917a2e77a..000000000000 --- a/include/asm-arm/arch-sa1100/dma.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/dma.h - * - * Generic SA1100 DMA support - * - * Copyright (C) 2000 Nicolas Pitre - * - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include "hardware.h" - - -/* - * The SA1100 has six internal DMA channels. - */ -#define SA1100_DMA_CHANNELS 6 - -/* - * Maximum physical DMA buffer size - */ -#define MAX_DMA_SIZE 0x1fff -#define CUT_DMA_SIZE 0x1000 - -/* - * All possible SA1100 devices a DMA channel can be attached to. - */ -typedef enum { - DMA_Ser0UDCWr = DDAR_Ser0UDCWr, /* Ser. port 0 UDC Write */ - DMA_Ser0UDCRd = DDAR_Ser0UDCRd, /* Ser. port 0 UDC Read */ - DMA_Ser1UARTWr = DDAR_Ser1UARTWr, /* Ser. port 1 UART Write */ - DMA_Ser1UARTRd = DDAR_Ser1UARTRd, /* Ser. port 1 UART Read */ - DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr, /* Ser. port 1 SDLC Write */ - DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd, /* Ser. port 1 SDLC Read */ - DMA_Ser2UARTWr = DDAR_Ser2UARTWr, /* Ser. port 2 UART Write */ - DMA_Ser2UARTRd = DDAR_Ser2UARTRd, /* Ser. port 2 UART Read */ - DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr, /* Ser. port 2 HSSP Write */ - DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd, /* Ser. port 2 HSSP Read */ - DMA_Ser3UARTWr = DDAR_Ser3UARTWr, /* Ser. port 3 UART Write */ - DMA_Ser3UARTRd = DDAR_Ser3UARTRd, /* Ser. port 3 UART Read */ - DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr, /* Ser. port 4 MCP 0 Write (audio) */ - DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd, /* Ser. port 4 MCP 0 Read (audio) */ - DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr, /* Ser. port 4 MCP 1 Write */ - DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd, /* Ser. port 4 MCP 1 Read */ - DMA_Ser4SSPWr = DDAR_Ser4SSPWr, /* Ser. port 4 SSP Write (16 bits) */ - DMA_Ser4SSPRd = DDAR_Ser4SSPRd /* Ser. port 4 SSP Read (16 bits) */ -} dma_device_t; - -typedef struct { - volatile u_long DDAR; - volatile u_long SetDCSR; - volatile u_long ClrDCSR; - volatile u_long RdDCSR; - volatile dma_addr_t DBSA; - volatile u_long DBTA; - volatile dma_addr_t DBSB; - volatile u_long DBTB; -} dma_regs_t; - -typedef void (*dma_callback_t)(void *data); - -/* - * DMA function prototypes - */ - -extern int sa1100_request_dma( dma_device_t device, const char *device_id, - dma_callback_t callback, void *data, - dma_regs_t **regs ); -extern void sa1100_free_dma( dma_regs_t *regs ); -extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size ); -extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs); -extern void sa1100_reset_dma(dma_regs_t *regs); - -/** - * sa1100_stop_dma - stop DMA in progress - * @regs: identifier for the channel to use - * - * This stops DMA without clearing buffer pointers. Unlike - * sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma() - * or sa1100_get_dma_pos(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_stop_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_resume_dma - resume DMA on a stopped channel - * @regs: identifier for the channel to use - * - * This resumes DMA on a channel previously stopped with - * sa1100_stop_dma(). - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_resume_dma(regs) ((regs)->SetDCSR = DCSR_IE|DCSR_RUN) - -/** - * sa1100_clear_dma - clear DMA pointers - * @regs: identifier for the channel to use - * - * This clear any DMA state so the DMA engine is ready to restart - * with new buffers through sa1100_start_dma(). Any buffers in flight - * are discarded. - * - * The @regs identifier is provided by a successful call to - * sa1100_request_dma(). - **/ - -#define sa1100_clear_dma(regs) ((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-sa1100/entry-macro.S b/include/asm-arm/arch-sa1100/entry-macro.S deleted file mode 100644 index 127db4aaf4f2..000000000000 --- a/include/asm-arm/arch-sa1100/entry-macro.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/entry-macro.S - * - * Low-level IRQ helper macros for SA1100-based platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - mov \base, #0xfa000000 @ ICIP = 0xfa050000 - add \base, \base, #0x00050000 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base] @ get irqs - ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004 - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #0 - beq 1001f - tst \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tst \irqstat, #0x0f - moveq \irqstat, \irqstat, lsr #4 - addeq \irqnr, \irqnr, #4 - tst \irqstat, #0x03 - moveq \irqstat, \irqstat, lsr #2 - addeq \irqnr, \irqnr, #2 - tst \irqstat, #0x01 - addeqs \irqnr, \irqnr, #1 -1001: - .endm - diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h deleted file mode 100644 index e66ecf74e807..000000000000 --- a/include/asm-arm/arch-sa1100/gpio.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/gpio.h - * - * SA1100 GPIO wrappers for arch-neutral GPIO calls - * - * Written by Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef __ASM_ARCH_SA1100_GPIO_H -#define __ASM_ARCH_SA1100_GPIO_H - -#include -#include -#include - -static inline int gpio_get_value(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - return GPLR & GPIO_GPIO(gpio); - else - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) - if (value) - GPSR = GPIO_GPIO(gpio); - else - GPCR = GPIO_GPIO(gpio); - else - __gpio_set_value(gpio, value); -} - -#define gpio_cansleep __gpio_cansleep - -static inline unsigned gpio_to_irq(unsigned gpio) -{ - if (gpio < 11) - return IRQ_GPIO0 + gpio; - else - return IRQ_GPIO11 - 11 + gpio; -} - -static inline unsigned irq_to_gpio(unsigned irq) -{ - if (irq < IRQ_GPIO11_27) - return irq - IRQ_GPIO0; - else - return irq - IRQ_GPIO11 + 11; -} - -#endif diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h deleted file mode 100644 index 3ca0ecf095e6..000000000000 --- a/include/asm-arm/arch-sa1100/h3600.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * - * Definitions for H3600 Handheld Computer - * - * Copyright 2000 Compaq Computer Corporation. - * - * Use consistent with the GNU GPL is permitted, - * provided that this copyright notice is - * preserved in its entirety in all copies and derived works. - * - * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, - * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS - * FITNESS FOR ANY PARTICULAR PURPOSE. - * - * Author: Jamey Hicks. - * - * History: - * - * 2001-10-?? Andrew Christian Added support for iPAQ H3800 - * - */ - -#ifndef _INCLUDE_H3600_H_ -#define _INCLUDE_H3600_H_ - -typedef int __bitwise pm_request_t; - -#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */ -#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ - -/* generalized support for H3xxx series Compaq Pocket PC's */ -#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) - -/* Physical memory regions corresponding to chip selects */ -#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000) -#define H3600_BANK_2_PHYS SA1100_CS2_PHYS -#define H3600_BANK_4_PHYS SA1100_CS4_PHYS - -/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */ -#define H3600_EGPIO_VIRT 0xf0000000 -#define H3600_BANK_2_VIRT 0xf1000000 -#define H3600_BANK_4_VIRT 0xf3800000 - -/* - Machine-independent GPIO definitions - --- these are common across all current iPAQ platforms -*/ - -#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */ - -#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10) -#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11) - -/* UDA1341 L3 Interface */ -#define GPIO_H3600_L3_DATA GPIO_GPIO (14) -#define GPIO_H3600_L3_MODE GPIO_GPIO (15) -#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16) - -#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17) -#define GPIO_H3600_SYS_CLK GPIO_GPIO (19) -#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21) - -#define GPIO_H3600_COM_DCD GPIO_GPIO (23) -#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24) -#define GPIO_H3600_COM_CTS GPIO_GPIO (25) -#define GPIO_H3600_COM_RTS GPIO_GPIO (26) - -#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0 -#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10 -#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11 -#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17 -#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21 -#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23 -#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24 -#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25 - - -#ifndef __ASSEMBLY__ - -enum ipaq_egpio_type { - IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */ - IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */ - IPAQ_EGPIO_AUDIO_ON, /* Audio power */ - IPAQ_EGPIO_QMUTE, /* Audio muting */ - IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */ - IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */ - IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */ - IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */ - IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */ - IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */ - IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */ - IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */ - IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */ -}; - -struct ipaq_model_ops { - const char *generic_name; - void (*control)(enum ipaq_egpio_type, int); - unsigned long (*read)(void); - void (*blank_callback)(int blank); - int (*pm_callback)(int req); /* Primary model callback */ - int (*pm_callback_aux)(int req); /* Secondary callback (used by HAL modules) */ -}; - -extern struct ipaq_model_ops ipaq_model_ops; - -static __inline__ const char * h3600_generic_name(void) -{ - return ipaq_model_ops.generic_name; -} - -static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,level); -} - -static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,0); -} - -static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x) -{ - if (ipaq_model_ops.control) - ipaq_model_ops.control(x,1); -} - -static __inline__ unsigned long read_h3600_egpio(void) -{ - if (ipaq_model_ops.read) - return ipaq_model_ops.read(); - return 0; -} - -static __inline__ int h3600_register_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = f; - return 0; -} - -static __inline__ void h3600_unregister_blank_callback(void (*f)(int)) -{ - ipaq_model_ops.blank_callback = NULL; -} - - -static __inline__ int h3600_register_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = f; - return 0; -} - -static __inline__ void h3600_unregister_pm_callback(int (*f)(int)) -{ - ipaq_model_ops.pm_callback_aux = NULL; -} - -static __inline__ int h3600_power_management(int req) -{ - if (ipaq_model_ops.pm_callback) - return ipaq_model_ops.pm_callback(req); - return 0; -} - -#endif /* ASSEMBLY */ - -#endif /* _INCLUDE_H3600_H_ */ diff --git a/include/asm-arm/arch-sa1100/h3600_gpio.h b/include/asm-arm/arch-sa1100/h3600_gpio.h deleted file mode 100644 index 62b0b7879685..000000000000 --- a/include/asm-arm/arch-sa1100/h3600_gpio.h +++ /dev/null @@ -1,540 +0,0 @@ -/* - * - * Definitions for H3600 Handheld Computer - * - * Copyright 2000 Compaq Computer Corporation. - * - * Use consistent with the GNU GPL is permitted, - * provided that this copyright notice is - * preserved in its entirety in all copies and derived works. - * - * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, - * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS - * FITNESS FOR ANY PARTICULAR PURPOSE. - * - * Author: Jamey Hicks. - * - * History: - * - * 2001-10-?? Andrew Christian Added support for iPAQ H3800 - * - */ - -#ifndef _INCLUDE_H3600_GPIO_H_ -#define _INCLUDE_H3600_GPIO_H_ - -/* - * GPIO lines that are common across ALL iPAQ models are in "h3600.h" - * This file contains machine-specific definitions - */ - -#define GPIO_H3600_SUSPEND GPIO_GPIO (0) -/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */ -#define GPIO_H3100_BT_ON GPIO_GPIO (2) -#define GPIO_H3100_GPIO3 GPIO_GPIO (3) -#define GPIO_H3100_QMUTE GPIO_GPIO (4) -#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5) -#define GPIO_H3100_AUD_ON GPIO_GPIO (6) -#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7) -#define GPIO_H3100_IR_ON GPIO_GPIO (8) -#define GPIO_H3100_IR_FSEL GPIO_GPIO (9) - -/* for H3600, audio sample rate clock generator */ -#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12) -#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13) - -#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18) -#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */ -#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22) -#define GPIO_H3600_OPT_DET GPIO_GPIO (27) - -/* H3800 specific pins */ -#define GPIO_H3800_AC_IN GPIO_GPIO (12) -#define GPIO_H3800_COM_DSR GPIO_GPIO (13) -#define GPIO_H3800_MMC_INT GPIO_GPIO (18) -#define GPIO_H3800_NOPT_IND GPIO_GPIO (20) /* Almost exactly the same as GPIO_H3600_OPT_DET */ -#define GPIO_H3800_OPT_BAT_FAULT GPIO_GPIO (22) -#define GPIO_H3800_CLK_OUT GPIO_GPIO (27) - -/****************************************************/ - -#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18 -#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27 - -#define IRQ_GPIO_H3800_MMC_INT IRQ_GPIO18 -#define IRQ_GPIO_H3800_NOPT_IND IRQ_GPIO20 /* almost same as OPT_DET */ - -/* H3100 / 3600 EGPIO pins */ -#define EGPIO_H3600_VPP_ON (1 << 0) -#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */ -#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */ -#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */ -#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */ -#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */ -#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */ -#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */ - -/* H3600 only EGPIO pins */ -#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */ -#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */ -#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */ -#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */ -#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */ -#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */ -#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */ -#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */ - -/********************* H3800, ASIC #2 ********************/ - -#define _H3800_ASIC2_Base (H3600_EGPIO_VIRT) -#define H3800_ASIC2_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) -#define H3800_ASIC2_NOFFSET(s,x,n,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y))) - -#define _H3800_ASIC2_GPIO_Base 0x0000 -#define _H3800_ASIC2_GPIO_Direction 0x0000 /* R/W, 16 bits 1:input, 0:output */ -#define _H3800_ASIC2_GPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_GPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_GPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_GPIO_InterruptClear 0x0010 /* W, 12 bits */ -#define _H3800_ASIC2_GPIO_InterruptFlag 0x0010 /* R, 12 bits - reads int status */ -#define _H3800_ASIC2_GPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_GPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_GPIO_InterruptEnable 0x001c /* R/W, 12 bits 1:enable interrupt */ -#define _H3800_ASIC2_GPIO_Alternate 0x003c /* R/W, 12+1 bits - set alternate functions */ - -#define H3800_ASIC2_GPIO_Direction H3800_ASIC2_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC2_GPIO_InterruptType H3800_ASIC2_OFFSET( u16, GPIO, InterruptType ) -#define H3800_ASIC2_GPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType ) -#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType ) -#define H3800_ASIC2_GPIO_InterruptClear H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear ) -#define H3800_ASIC2_GPIO_InterruptFlag H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag ) -#define H3800_ASIC2_GPIO_Data H3800_ASIC2_OFFSET( u16, GPIO, Data ) -#define H3800_ASIC2_GPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut ) -#define H3800_ASIC2_GPIO_InterruptEnable H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable ) -#define H3800_ASIC2_GPIO_Alternate H3800_ASIC2_OFFSET( u16, GPIO, Alternate ) - -#define GPIO_H3800_ASIC2_IN_Y1_N (1 << 0) /* Output: Touchscreen Y1 */ -#define GPIO_H3800_ASIC2_IN_X0 (1 << 1) /* Output: Touchscreen X0 */ -#define GPIO_H3800_ASIC2_IN_Y0 (1 << 2) /* Output: Touchscreen Y0 */ -#define GPIO_H3800_ASIC2_IN_X1_N (1 << 3) /* Output: Touchscreen X1 */ -#define GPIO_H3800_ASIC2_BT_RST (1 << 4) /* Output: Bluetooth reset */ -#define GPIO_H3800_ASIC2_PEN_IRQ (1 << 5) /* Input : Pen down */ -#define GPIO_H3800_ASIC2_SD_DETECT (1 << 6) /* Input : SD detect */ -#define GPIO_H3800_ASIC2_EAR_IN_N (1 << 7) /* Input : Audio jack plug inserted */ -#define GPIO_H3800_ASIC2_OPT_PCM_RESET (1 << 8) /* Output: */ -#define GPIO_H3800_ASIC2_OPT_RESET (1 << 9) /* Output: */ -#define GPIO_H3800_ASIC2_USB_DETECT_N (1 << 10) /* Input : */ -#define GPIO_H3800_ASIC2_SD_CON_SLT (1 << 11) /* Input : */ - -#define _H3800_ASIC2_KPIO_Base 0x0200 -#define _H3800_ASIC2_KPIO_Direction 0x0000 /* R/W, 12 bits 1:input, 0:output */ -#define _H3800_ASIC2_KPIO_InterruptType 0x0004 /* R/W, 12 bits 1:edge, 0:level */ -#define _H3800_ASIC2_KPIO_InterruptEdgeType 0x0008 /* R/W, 12 bits 1:rising, 0:falling */ -#define _H3800_ASIC2_KPIO_InterruptLevelType 0x000C /* R/W, 12 bits 1:high, 0:low */ -#define _H3800_ASIC2_KPIO_InterruptClear 0x0010 /* W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_InterruptFlag 0x0010 /* R, 20 bits - 8 special - reads int status */ -#define _H3800_ASIC2_KPIO_Data 0x0014 /* R/W, 16 bits */ -#define _H3800_ASIC2_KPIO_BattFaultOut 0x0018 /* R/W, 16 bit - sets level on batt fault */ -#define _H3800_ASIC2_KPIO_InterruptEnable 0x001c /* R/W, 20 bits - 8 special */ -#define _H3800_ASIC2_KPIO_Alternate 0x003c /* R/W, 6 bits */ - -#define H3800_ASIC2_KPIO_Direction H3800_ASIC2_OFFSET( u16, KPIO, Direction ) -#define H3800_ASIC2_KPIO_InterruptType H3800_ASIC2_OFFSET( u16, KPIO, InterruptType ) -#define H3800_ASIC2_KPIO_InterruptEdgeType H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType ) -#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType ) -#define H3800_ASIC2_KPIO_InterruptClear H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear ) -#define H3800_ASIC2_KPIO_InterruptFlag H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag ) -#define H3800_ASIC2_KPIO_Data H3800_ASIC2_OFFSET( u16, KPIO, Data ) -#define H3800_ASIC2_KPIO_BattFaultOut H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut ) -#define H3800_ASIC2_KPIO_InterruptEnable H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable ) -#define H3800_ASIC2_KPIO_Alternate H3800_ASIC2_OFFSET( u16, KPIO, Alternate ) - -#define H3800_ASIC2_KPIO_SPI_INT ( 1 << 16 ) -#define H3800_ASIC2_KPIO_OWM_INT ( 1 << 17 ) -#define H3800_ASIC2_KPIO_ADC_INT ( 1 << 18 ) -#define H3800_ASIC2_KPIO_UART_0_INT ( 1 << 19 ) -#define H3800_ASIC2_KPIO_UART_1_INT ( 1 << 20 ) -#define H3800_ASIC2_KPIO_TIMER_0_INT ( 1 << 21 ) -#define H3800_ASIC2_KPIO_TIMER_1_INT ( 1 << 22 ) -#define H3800_ASIC2_KPIO_TIMER_2_INT ( 1 << 23 ) - -#define KPIO_H3800_ASIC2_RECORD_BTN_N (1 << 0) /* Record button */ -#define KPIO_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Keypad */ -#define KPIO_H3800_ASIC2_KEY_5W2_N (1 << 2) /* */ -#define KPIO_H3800_ASIC2_KEY_5W3_N (1 << 3) /* */ -#define KPIO_H3800_ASIC2_KEY_5W4_N (1 << 4) /* */ -#define KPIO_H3800_ASIC2_KEY_5W5_N (1 << 5) /* */ -#define KPIO_H3800_ASIC2_KEY_LEFT_N (1 << 6) /* */ -#define KPIO_H3800_ASIC2_KEY_RIGHT_N (1 << 7) /* */ -#define KPIO_H3800_ASIC2_KEY_AP1_N (1 << 8) /* Old "Calendar" */ -#define KPIO_H3800_ASIC2_KEY_AP2_N (1 << 9) /* Old "Schedule" */ -#define KPIO_H3800_ASIC2_KEY_AP3_N (1 << 10) /* Old "Q" */ -#define KPIO_H3800_ASIC2_KEY_AP4_N (1 << 11) /* Old "Undo" */ - -/* Alternate KPIO functions (set by default) */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N (1 << 1) /* Action key */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N (1 << 2) /* J1 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N (1 << 3) /* J2 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N (1 << 4) /* J3 of keypad input */ -#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N (1 << 5) /* J4 of keypad input */ - -#define _H3800_ASIC2_SPI_Base 0x0400 -#define _H3800_ASIC2_SPI_Control 0x0000 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_Data 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_SPI_ChipSelectDisabled 0x0008 /* W 8 bits */ - -#define H3800_ASIC2_SPI_Control H3800_ASIC2_OFFSET( u8, SPI, Control ) -#define H3800_ASIC2_SPI_Data H3800_ASIC2_OFFSET( u8, SPI, Data ) -#define H3800_ASIC2_SPI_ChipSelectDisabled H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled ) - -#define _H3800_ASIC2_PWM_0_Base 0x0600 -#define _H3800_ASIC2_PWM_1_Base 0x0700 -#define _H3800_ASIC2_PWM_TimeBase 0x0000 /* R/W 6 bits */ -#define _H3800_ASIC2_PWM_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_PWM_DutyTime 0x0008 /* R/W 12 bits */ - -#define H3800_ASIC2_PWM_0_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 0, TimeBase ) -#define H3800_ASIC2_PWM_0_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime ) -#define H3800_ASIC2_PWM_0_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime ) - -#define H3800_ASIC2_PWM_1_TimeBase H3800_ASIC2_NOFFSET( u8, PWM, 1, TimeBase ) -#define H3800_ASIC2_PWM_1_PeriodTime H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime ) -#define H3800_ASIC2_PWM_1_DutyTime H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime ) - -#define H3800_ASIC2_PWM_TIMEBASE_MASK 0xf /* Low 4 bits sets time base, max = 8 */ -#define H3800_ASIC2_PWM_TIMEBASE_ENABLE ( 1 << 4 ) /* Enable clock */ -#define H3800_ASIC2_PWM_TIMEBASE_CLEAR ( 1 << 5 ) /* Clear the PWM */ - -#define _H3800_ASIC2_LED_0_Base 0x0800 -#define _H3800_ASIC2_LED_1_Base 0x0880 -#define _H3800_ASIC2_LED_2_Base 0x0900 -#define _H3800_ASIC2_LED_TimeBase 0x0000 /* R/W 7 bits */ -#define _H3800_ASIC2_LED_PeriodTime 0x0004 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_DutyTime 0x0008 /* R/W 12 bits */ -#define _H3800_ASIC2_LED_AutoStopCount 0x000c /* R/W 16 bits */ - -#define H3800_ASIC2_LED_0_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 0, TimeBase ) -#define H3800_ASIC2_LED_0_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime ) -#define H3800_ASIC2_LED_0_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime ) -#define H3800_ASIC2_LED_0_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock ) - -#define H3800_ASIC2_LED_1_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 1, TimeBase ) -#define H3800_ASIC2_LED_1_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime ) -#define H3800_ASIC2_LED_1_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime ) -#define H3800_ASIC2_LED_1_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock ) - -#define H3800_ASIC2_LED_2_TimeBase H3800_ASIC2_NOFFSET( u8, LED, 2, TimeBase ) -#define H3800_ASIC2_LED_2_PeriodTime H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime ) -#define H3800_ASIC2_LED_2_DutyTime H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime ) -#define H3800_ASIC2_LED_2_AutoStopClock H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock ) - -#define H3800_ASIC2_LED_TIMEBASE_MASK 0x0f /* Low 4 bits sets time base, max = 13 */ -#define H3800_ASIC2_LED_TIMEBASE_BLINK ( 1 << 4 ) /* Enable blinking */ -#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP ( 1 << 5 ) -#define H3800_ASIC2_LED_TIMEBASE_ALWAYS ( 1 << 6 ) /* Enable blink always */ - -#define _H3800_ASIC2_UART_0_Base 0x0A00 -#define _H3800_ASIC2_UART_1_Base 0x0C00 -#define _H3800_ASIC2_UART_Receive 0x0000 /* R 8 bits */ -#define _H3800_ASIC2_UART_Transmit 0x0000 /* W 8 bits */ -#define _H3800_ASIC2_UART_IntEnable 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_IntVerify 0x0008 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_FIFOControl 0x000c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineControl 0x0010 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ModemStatus 0x0014 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_LineStatus 0x0018 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_ScratchPad 0x001c /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchL 0x0020 /* R/W 8 bits */ -#define _H3800_ASIC2_UART_DivisorLatchH 0x0024 /* R/W 8 bits */ - -#define H3800_ASIC2_UART_0_Receive H3800_ASIC2_NOFFSET( u8, UART, 0, Receive ) -#define H3800_ASIC2_UART_0_Transmit H3800_ASIC2_NOFFSET( u8, UART, 0, Transmit ) -#define H3800_ASIC2_UART_0_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 0, IntEnable ) -#define H3800_ASIC2_UART_0_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 0, IntVerify ) -#define H3800_ASIC2_UART_0_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 0, FIFOControl ) -#define H3800_ASIC2_UART_0_LineControl H3800_ASIC2_NOFFSET( u8, UART, 0, LineControl ) -#define H3800_ASIC2_UART_0_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 0, ModemStatus ) -#define H3800_ASIC2_UART_0_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 0, LineStatus ) -#define H3800_ASIC2_UART_0_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 0, ScratchPad ) -#define H3800_ASIC2_UART_0_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchL ) -#define H3800_ASIC2_UART_0_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 0, DivisorLatchH ) - -#define H3800_ASIC2_UART_1_Receive H3800_ASIC2_NOFFSET( u8, UART, 1, Receive ) -#define H3800_ASIC2_UART_1_Transmit H3800_ASIC2_NOFFSET( u8, UART, 1, Transmit ) -#define H3800_ASIC2_UART_1_IntEnable H3800_ASIC2_NOFFSET( u8, UART, 1, IntEnable ) -#define H3800_ASIC2_UART_1_IntVerify H3800_ASIC2_NOFFSET( u8, UART, 1, IntVerify ) -#define H3800_ASIC2_UART_1_FIFOControl H3800_ASIC2_NOFFSET( u8, UART, 1, FIFOControl ) -#define H3800_ASIC2_UART_1_LineControl H3800_ASIC2_NOFFSET( u8, UART, 1, LineControl ) -#define H3800_ASIC2_UART_1_ModemStatus H3800_ASIC2_NOFFSET( u8, UART, 1, ModemStatus ) -#define H3800_ASIC2_UART_1_LineStatus H3800_ASIC2_NOFFSET( u8, UART, 1, LineStatus ) -#define H3800_ASIC2_UART_1_ScratchPad H3800_ASIC2_NOFFSET( u8, UART, 1, ScratchPad ) -#define H3800_ASIC2_UART_1_DivisorLatchL H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchL ) -#define H3800_ASIC2_UART_1_DivisorLatchH H3800_ASIC2_NOFFSET( u8, UART, 1, DivisorLatchH ) - -#define _H3800_ASIC2_TIMER_Base 0x0E00 -#define _H3800_ASIC2_TIMER_Command 0x0000 /* R/W 8 bits */ - -#define H3800_ASIC2_TIMER_Command H3800_ASIC2_OFFSET( u8, Timer, Command ) - -#define H3800_ASIC2_TIMER_GAT_0 ( 1 << 0 ) /* Gate enable, counter 0 */ -#define H3800_ASIC2_TIMER_GAT_1 ( 1 << 1 ) /* Gate enable, counter 1 */ -#define H3800_ASIC2_TIMER_GAT_2 ( 1 << 2 ) /* Gate enable, counter 2 */ -#define H3800_ASIC2_TIMER_CLK_0 ( 1 << 3 ) /* Clock enable, counter 0 */ -#define H3800_ASIC2_TIMER_CLK_1 ( 1 << 4 ) /* Clock enable, counter 1 */ -#define H3800_ASIC2_TIMER_CLK_2 ( 1 << 5 ) /* Clock enable, counter 2 */ -#define H3800_ASIC2_TIMER_MODE_0 ( 1 << 6 ) /* Mode 0 enable, counter 0 */ -#define H3800_ASIC2_TIMER_MODE_1 ( 1 << 7 ) /* Mode 0 enable, counter 1 */ - -#define _H3800_ASIC2_CLOCK_Base 0x1000 -#define _H3800_ASIC2_CLOCK_Enable 0x0000 /* R/W 18 bits */ - -#define H3800_ASIC2_CLOCK_Enable H3800_ASIC2_OFFSET( u32, CLOCK, Enable ) - -#define H3800_ASIC2_CLOCK_AUDIO_1 0x0001 /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_2 0x0002 /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_3 0x0004 /* Enable 5.6 MHz clock for 11 kHZ sample rate */ -#define H3800_ASIC2_CLOCK_AUDIO_4 0x0008 /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */ -#define H3800_ASIC2_CLOCK_ADC ( 1 << 4 ) /* 1.024 MHz clock to ADC */ -#define H3800_ASIC2_CLOCK_SPI ( 1 << 5 ) /* 4.096 MHz clock to SPI */ -#define H3800_ASIC2_CLOCK_OWM ( 1 << 6 ) /* 4.096 MHz clock to OWM */ -#define H3800_ASIC2_CLOCK_PWM ( 1 << 7 ) /* 2.048 MHz clock to PWM */ -#define H3800_ASIC2_CLOCK_UART_1 ( 1 << 8 ) /* 24.576 MHz clock to UART1 (turn off bit 16) */ -#define H3800_ASIC2_CLOCK_UART_0 ( 1 << 9 ) /* 24.576 MHz clock to UART0 (turn off bit 17) */ -#define H3800_ASIC2_CLOCK_SD_1 ( 1 << 10 ) /* 16.934 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_2 ( 2 << 10 ) /* 24.576 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_3 ( 3 << 10 ) /* 33.869 MHz to SD */ -#define H3800_ASIC2_CLOCK_SD_4 ( 4 << 10 ) /* 49.152 MHz to SD */ -#define H3800_ASIC2_CLOCK_EX0 ( 1 << 13 ) /* Enable 32.768 kHz crystal */ -#define H3800_ASIC2_CLOCK_EX1 ( 1 << 14 ) /* Enable 24.576 MHz crystal */ -#define H3800_ASIC2_CLOCK_EX2 ( 1 << 15 ) /* Enable 33.869 MHz crystal */ -#define H3800_ASIC2_CLOCK_SLOW_UART_1 ( 1 << 16 ) /* Enable 3.686 MHz to UART1 (turn off bit 8) */ -#define H3800_ASIC2_CLOCK_SLOW_UART_0 ( 1 << 17 ) /* Enable 3.686 MHz to UART0 (turn off bit 9) */ - -#define _H3800_ASIC2_ADC_Base 0x1200 -#define _H3800_ASIC2_ADC_Multiplexer 0x0000 /* R/W 4 bits - low 3 bits set channel */ -#define _H3800_ASIC2_ADC_ControlStatus 0x0004 /* R/W 8 bits */ -#define _H3800_ASIC2_ADC_Data 0x0008 /* R 10 bits */ - -#define H3800_ASIC2_ADC_Multiplexer H3800_ASIC2_OFFSET( u8, ADC, Multiplexer ) -#define H3800_ASIC2_ADC_ControlStatus H3800_ASIC2_OFFSET( u8, ADC, ControlStatus ) -#define H3800_ASIC2_ADC_Data H3800_ASIC2_OFFSET( u16, ADC, Data ) - -#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK 0x07 /* Low 3 bits sets channel. max = 4 */ -#define H3600_ASIC2_ADC_MUX_CLKEN ( 1 << 3 ) /* Enable clock */ - -#define H3600_ASIC2_ADC_CSR_ADPS_MASK 0x0f /* Low 4 bits sets prescale, max = 8 */ -#define H3600_ASIC2_ADC_CSR_FREE_RUN ( 1 << 4 ) -#define H3600_ASIC2_ADC_CSR_INT_ENABLE ( 1 << 5 ) -#define H3600_ASIC2_ADC_CSR_START ( 1 << 6 ) /* Set to start conversion. Goes to 0 when done */ -#define H3600_ASIC2_ADC_CSR_ENABLE ( 1 << 7 ) /* 1:power up ADC, 0:power down */ - - -#define _H3800_ASIC2_INTR_Base 0x1600 -#define _H3800_ASIC2_INTR_MaskAndFlag 0x0000 /* R/(W) 8bits */ -#define _H3800_ASIC2_INTR_ClockPrescale 0x0004 /* R/(W) 5bits */ -#define _H3800_ASIC2_INTR_TimerSet 0x0008 /* R/(W) 8bits */ - -#define H3800_ASIC2_INTR_MaskAndFlag H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag ) -#define H3800_ASIC2_INTR_ClockPrescale H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale ) -#define H3800_ASIC2_INTR_TimerSet H3800_ASIC2_OFFSET( u8, INTR, TimerSet ) - -#define H3800_ASIC2_INTR_GLOBAL_MASK ( 1 << 0 ) /* Global interrupt mask */ -#define H3800_ASIC2_INTR_POWER_ON_RESET ( 1 << 1 ) /* 01: Power on reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_EXTERNAL_RESET ( 2 << 1 ) /* 10: External reset (bits 1 & 2 ) */ -#define H3800_ASIC2_INTR_MASK_UART_0 ( 1 << 4 ) -#define H3800_ASIC2_INTR_MASK_UART_1 ( 1 << 5 ) -#define H3800_ASIC2_INTR_MASK_TIMER ( 1 << 6 ) -#define H3800_ASIC2_INTR_MASK_OWM ( 1 << 7 ) - -#define H3800_ASIC2_INTR_CLOCK_PRESCALE 0x0f /* 4 bits, max 14 */ -#define H3800_ASIC2_INTR_SET ( 1 << 4 ) /* Time base enable */ - - -#define _H3800_ASIC2_OWM_Base 0x1800 -#define _H3800_ASIC2_OWM_Command 0x0000 /* R/W 4 bits command register */ -#define _H3800_ASIC2_OWM_Data 0x0004 /* R/W 8 bits, transmit / receive buffer */ -#define _H3800_ASIC2_OWM_Interrupt 0x0008 /* R/W Command register */ -#define _H3800_ASIC2_OWM_InterruptEnable 0x000c /* R/W Command register */ -#define _H3800_ASIC2_OWM_ClockDivisor 0x0010 /* R/W 5 bits of divisor and pre-scale */ - -#define H3800_ASIC2_OWM_Command H3800_ASIC2_OFFSET( u8, OWM, Command ) -#define H3800_ASIC2_OWM_Data H3800_ASIC2_OFFSET( u8, OWM, Data ) -#define H3800_ASIC2_OWM_Interrupt H3800_ASIC2_OFFSET( u8, OWM, Interrupt ) -#define H3800_ASIC2_OWM_InterruptEnable H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable ) -#define H3800_ASIC2_OWM_ClockDivisor H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor ) - -#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 ) /* Set to force reset on 1-wire bus */ -#define H3800_ASIC2_OWM_CMD_SRA ( 1 << 1 ) /* Set to switch to Search ROM accelerator mode */ -#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT ( 1 << 2 ) /* Write only - forces bus low */ -#define H3800_ASIC2_OWM_CMD_DQ_INPUT ( 1 << 3 ) /* Read only - reflects state of bus */ - -#define H3800_ASIC2_OWM_INT_PD ( 1 << 0 ) /* Presence detect */ -#define H3800_ASIC2_OWM_INT_PDR ( 1 << 1 ) /* Presence detect result */ -#define H3800_ASIC2_OWM_INT_TBE ( 1 << 2 ) /* Transmit buffer empty */ -#define H3800_ASIC2_OWM_INT_TEMT ( 1 << 3 ) /* Transmit shift register empty */ -#define H3800_ASIC2_OWM_INT_RBF ( 1 << 4 ) /* Receive buffer full */ - -#define H3800_ASIC2_OWM_INTEN_EPD ( 1 << 0 ) /* Enable receive buffer full interrupt */ -#define H3800_ASIC2_OWM_INTEN_IAS ( 1 << 1 ) /* Enable transmit shift register empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETBE ( 1 << 2 ) /* Enable transmit buffer empty interrupt */ -#define H3800_ASIC2_OWM_INTEN_ETMT ( 1 << 3 ) /* INTR active state */ -#define H3800_ASIC2_OWM_INTEN_ERBF ( 1 << 4 ) /* Enable presence detect interrupt */ - -#define _H3800_ASIC2_FlashCtl_Base 0x1A00 - -/****************************************************/ -/* H3800, ASIC #1 - * This ASIC is accesed through ASIC #2, and - * mapped into the 1c00 - 1f00 region - */ - -#define H3800_ASIC1_OFFSET(s,x,y) \ - (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1)))) - -#define _H3800_ASIC1_MMC_Base 0x1c00 - -#define _H3800_ASIC1_MMC_StartStopClock 0x00 /* R/W 8bit */ -#define _H3800_ASIC1_MMC_Status 0x02 /* R See below, default 0x0040 */ -#define _H3800_ASIC1_MMC_ClockRate 0x04 /* R/W 8bit, low 3 bits are clock divisor */ -#define _H3800_ASIC1_MMC_SPIRegister 0x08 /* R/W 8bit, see below */ -#define _H3800_ASIC1_MMC_CmdDataCont 0x0a /* R/W 8bit, write to start MMC adapter */ -#define _H3800_ASIC1_MMC_ResponseTimeout 0x0c /* R/W 8bit, clocks before response timeout */ -#define _H3800_ASIC1_MMC_ReadTimeout 0x0e /* R/W 16bit, clocks before received data timeout */ -#define _H3800_ASIC1_MMC_BlockLength 0x10 /* R/W 10bit */ -#define _H3800_ASIC1_MMC_NumOfBlocks 0x12 /* R/W 16bit, in block mode, number of blocks */ -#define _H3800_ASIC1_MMC_InterruptMask 0x1a /* R/W 8bit */ -#define _H3800_ASIC1_MMC_CommandNumber 0x1c /* R/W 6 bits */ -#define _H3800_ASIC1_MMC_ArgumentH 0x1e /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ArgumentL 0x20 /* R/W 16 bits */ -#define _H3800_ASIC1_MMC_ResFifo 0x22 /* R 8 x 16 bits - contains response FIFO */ -#define _H3800_ASIC1_MMC_BufferPartFull 0x28 /* R/W 8 bits */ - -#define H3800_ASIC1_MMC_StartStopClock H3800_ASIC1_OFFSET( u8, MMC, StartStopClock ) -#define H3800_ASIC1_MMC_Status H3800_ASIC1_OFFSET( u16, MMC, Status ) -#define H3800_ASIC1_MMC_ClockRate H3800_ASIC1_OFFSET( u8, MMC, ClockRate ) -#define H3800_ASIC1_MMC_SPIRegister H3800_ASIC1_OFFSET( u8, MMC, SPIRegister ) -#define H3800_ASIC1_MMC_CmdDataCont H3800_ASIC1_OFFSET( u8, MMC, CmdDataCont ) -#define H3800_ASIC1_MMC_ResponseTimeout H3800_ASIC1_OFFSET( u8, MMC, ResponseTimeout ) -#define H3800_ASIC1_MMC_ReadTimeout H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout ) -#define H3800_ASIC1_MMC_BlockLength H3800_ASIC1_OFFSET( u16, MMC, BlockLength ) -#define H3800_ASIC1_MMC_NumOfBlocks H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks ) -#define H3800_ASIC1_MMC_InterruptMask H3800_ASIC1_OFFSET( u8, MMC, InterruptMask ) -#define H3800_ASIC1_MMC_CommandNumber H3800_ASIC1_OFFSET( u8, MMC, CommandNumber ) -#define H3800_ASIC1_MMC_ArgumentH H3800_ASIC1_OFFSET( u16, MMC, ArgumentH ) -#define H3800_ASIC1_MMC_ArgumentL H3800_ASIC1_OFFSET( u16, MMC, ArgumentL ) -#define H3800_ASIC1_MMC_ResFifo H3800_ASIC1_OFFSET( u16, MMC, ResFifo ) -#define H3800_ASIC1_MMC_BufferPartFull H3800_ASIC1_OFFSET( u8, MMC, BufferPartFull ) - -#define H3800_ASIC1_MMC_STOP_CLOCK (1 << 0) /* Write to "StartStopClock" register */ -#define H3800_ASIC1_MMC_START_CLOCK (1 << 1) - -#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT (1 << 0) -#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT (1 << 1) -#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR (1 << 2) -#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR (1 << 3) -#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR (1 << 4) /* SPI data token error received */ -#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR (1 << 5) -#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY (1 << 6) -#define H3800_ASIC1_MMC_STATUS_FIFO_FULL (1 << 7) -#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE (1 << 8) /* MultiMediaCard clock stopped */ -#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE (1 << 11) /* Write operation, indicates transfer finished */ -#define H3800_ASIC1_MMC_STATUS_END_PROGRAM (1 << 12) /* End write and read operations */ -#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE (1 << 13) /* End command response */ - -#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE (1 << 0) /* Enables SPI mode */ -#define H3800_ASIC1_MMC_SPI_REG_CRC_ON (1 << 1) /* 1:turn on CRC */ -#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE (1 << 2) /* 1:turn on SPI CS */ -#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK 0x38 /* Bits 3,4,5 are the SPI CS relative address */ - -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE 0x00 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1 0x01 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2 0x02 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3 0x03 -#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE (1 << 2) /* This command contains a data transfer */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE (1 << 3) /* This data transfer is a write */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE (1 << 4) /* This data transfer is in stream mode */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT (1 << 5) /* Busy signal expected after current cmd */ -#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE (1 << 6) /* Enables the 80 bits for initializing card */ - -#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE (1 << 0) -#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE (1 << 1) -#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE (1 << 2) -#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY (1 << 3) - -#define H3800_ASIC1_MMC_BUFFER_PART_FULL (1 << 0) - -/********* GPIO **********/ - -#define _H3800_ASIC1_GPIO_Base 0x1e00 - -#define _H3800_ASIC1_GPIO_Mask 0x30 /* R/W 0:don't mask, 1:mask interrupt */ -#define _H3800_ASIC1_GPIO_Direction 0x32 /* R/W 0:input, 1:output */ -#define _H3800_ASIC1_GPIO_Out 0x34 /* R/W 0:output low, 1:output high */ -#define _H3800_ASIC1_GPIO_TriggerType 0x36 /* R/W 0:level, 1:edge */ -#define _H3800_ASIC1_GPIO_EdgeTrigger 0x38 /* R/W 0:falling, 1:rising */ -#define _H3800_ASIC1_GPIO_LevelTrigger 0x3A /* R/W 0:low, 1:high level detect */ -#define _H3800_ASIC1_GPIO_LevelStatus 0x3C /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_EdgeStatus 0x3E /* R/W 0:none, 1:detect */ -#define _H3800_ASIC1_GPIO_State 0x40 /* R See masks below (default 0) */ -#define _H3800_ASIC1_GPIO_Reset 0x42 /* R/W See masks below (default 0x04) */ -#define _H3800_ASIC1_GPIO_SleepMask 0x44 /* R/W 0:don't mask, 1:mask trigger in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepDir 0x46 /* R/W direction 0:input, 1:output in sleep mode */ -#define _H3800_ASIC1_GPIO_SleepOut 0x48 /* R/W level 0:low, 1:high in sleep mode */ -#define _H3800_ASIC1_GPIO_Status 0x4A /* R Pin status */ -#define _H3800_ASIC1_GPIO_BattFaultDir 0x4C /* R/W direction 0:input, 1:output in batt_fault */ -#define _H3800_ASIC1_GPIO_BattFaultOut 0x4E /* R/W level 0:low, 1:high in batt_fault */ - -#define H3800_ASIC1_GPIO_Mask H3800_ASIC1_OFFSET( u16, GPIO, Mask ) -#define H3800_ASIC1_GPIO_Direction H3800_ASIC1_OFFSET( u16, GPIO, Direction ) -#define H3800_ASIC1_GPIO_Out H3800_ASIC1_OFFSET( u16, GPIO, Out ) -#define H3800_ASIC1_GPIO_TriggerType H3800_ASIC1_OFFSET( u16, GPIO, TriggerType ) -#define H3800_ASIC1_GPIO_EdgeTrigger H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger ) -#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger ) -#define H3800_ASIC1_GPIO_LevelStatus H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus ) -#define H3800_ASIC1_GPIO_EdgeStatus H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus ) -#define H3800_ASIC1_GPIO_State H3800_ASIC1_OFFSET( u8, GPIO, State ) -#define H3800_ASIC1_GPIO_Reset H3800_ASIC1_OFFSET( u8, GPIO, Reset ) -#define H3800_ASIC1_GPIO_SleepMask H3800_ASIC1_OFFSET( u16, GPIO, SleepMask ) -#define H3800_ASIC1_GPIO_SleepDir H3800_ASIC1_OFFSET( u16, GPIO, SleepDir ) -#define H3800_ASIC1_GPIO_SleepOut H3800_ASIC1_OFFSET( u16, GPIO, SleepOut ) -#define H3800_ASIC1_GPIO_Status H3800_ASIC1_OFFSET( u16, GPIO, Status ) -#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir ) -#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut ) - -#define H3800_ASIC1_GPIO_STATE_MASK (1 << 0) -#define H3800_ASIC1_GPIO_STATE_DIRECTION (1 << 1) -#define H3800_ASIC1_GPIO_STATE_OUT (1 << 2) -#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE (1 << 3) -#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER (1 << 4) -#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER (1 << 5) - -#define H3800_ASIC1_GPIO_RESET_SOFTWARE (1 << 0) -#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP (1 << 1) -#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON (1 << 2) - -/* These are all outputs */ -#define GPIO_H3800_ASIC1_IR_ON_N (1 << 0) /* Apply power to the IR Module */ -#define GPIO_H3800_ASIC1_SD_PWR_ON (1 << 1) /* Secure Digital power on */ -#define GPIO_H3800_ASIC1_RS232_ON (1 << 2) /* Turn on power to the RS232 chip ? */ -#define GPIO_H3800_ASIC1_PULSE_GEN (1 << 3) /* Goes to speaker / earphone */ -#define GPIO_H3800_ASIC1_CH_TIMER (1 << 4) /* */ -#define GPIO_H3800_ASIC1_LCD_5V_ON (1 << 5) /* Enables LCD_5V */ -#define GPIO_H3800_ASIC1_LCD_ON (1 << 6) /* Enables LCD_3V */ -#define GPIO_H3800_ASIC1_LCD_PCI (1 << 7) /* Connects to PDWN on LCD controller */ -#define GPIO_H3800_ASIC1_VGH_ON (1 << 8) /* Drives VGH on the LCD (+9??) */ -#define GPIO_H3800_ASIC1_VGL_ON (1 << 9) /* Drivers VGL on the LCD (-6??) */ -#define GPIO_H3800_ASIC1_FL_PWR_ON (1 << 10) /* Frontlight power on */ -#define GPIO_H3800_ASIC1_BT_PWR_ON (1 << 11) /* Bluetooth power on */ -#define GPIO_H3800_ASIC1_SPK_ON (1 << 12) /* */ -#define GPIO_H3800_ASIC1_EAR_ON_N (1 << 13) /* */ -#define GPIO_H3800_ASIC1_AUD_PWR_ON (1 << 14) /* */ - -/* Write enable for the flash */ - -#define _H3800_ASIC1_FlashWP_Base 0x1F00 -#define _H3800_ASIC1_FlashWP_VPP_ON 0x00 /* R 1: write, 0: protect */ -#define H3800_ASIC1_FlashWP_VPP_ON H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON ) - -#endif /* _INCLUDE_H3600_GPIO_H_ */ diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h deleted file mode 100644 index 1abd7cfc8bce..000000000000 --- a/include/asm-arm/arch-sa1100/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/hardware.h - * - * Copyright (C) 1998 Nicolas Pitre - * - * This file contains the hardware definitions for SA1100 architecture - * - * 2000/05/23 John Dorsey - * Definitions for SA1111 added. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - - -#define UNCACHEABLE_ADDR 0xfa050000 - - -/* - * SA1100 internal I/O mappings - * - * We have the following mapping: - * phys virt - * 80000000 f8000000 - * 90000000 fa000000 - * a0000000 fc000000 - * b0000000 fe000000 - */ - -#define VIO_BASE 0xf8000000 /* virtual start of IO space */ -#define VIO_SHIFT 3 /* x = IO space shrink power */ -#define PIO_START 0x80000000 /* physical start of IO space */ - -#define io_p2v( x ) \ - ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE ) -#define io_v2p( x ) \ - ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))< -#include -#include - -#error "This code is broken and needs update to match with current ide support" - - -/* - * Set up a hw structure for a specified data port, control port and IRQ. - * This should follow whatever the default interface uses. - */ -static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - unsigned long reg = data_port; - int i; - int regincr = 1; - - /* The Empeg board has the first two address lines unused */ - if (machine_is_empeg()) - regincr = 1 << 2; - - /* The LART doesn't use A0 for IDE */ - if (machine_is_lart()) - regincr = 1 << 1; - - memset(hw, 0, sizeof(*hw)); - - for (i = 0; i <= 7; i++) { - hw->io_ports_array[i] = reg; - reg += regincr; - } - - hw->io_ports.ctl_addr = ctrl_port; - - if (irq) - *irq = 0; -} - -/* - * This registers the standard ports for this architecture with the IDE - * driver. - */ -static __inline__ void -ide_init_default_hwifs(void) -{ - if (machine_is_lart()) { -#ifdef CONFIG_SA1100_LART - hw_regs_t hw; - - /* Enable GPIO as interrupt line */ - GPDR &= ~LART_GPIO_IDE; - set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING); - - /* set PCMCIA interface timing */ - MECR = 0x00060006; - - /* init the interface */ - ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL); - hw.irq = LART_IRQ_IDE; - ide_register_hw(&hw); -#endif - } -} diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h deleted file mode 100644 index 0756269404b1..000000000000 --- a/include/asm-arm/arch-sa1100/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/io.h - * - * Copyright (C) 1997-1999 Russell King - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h deleted file mode 100644 index 7bf80484bb77..000000000000 --- a/include/asm-arm/arch-sa1100/irqs.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/irqs.h - * - * Copyright (C) 1996 Russell King - * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). - * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) - * - * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. - */ - -#define IRQ_GPIO0 0 -#define IRQ_GPIO1 1 -#define IRQ_GPIO2 2 -#define IRQ_GPIO3 3 -#define IRQ_GPIO4 4 -#define IRQ_GPIO5 5 -#define IRQ_GPIO6 6 -#define IRQ_GPIO7 7 -#define IRQ_GPIO8 8 -#define IRQ_GPIO9 9 -#define IRQ_GPIO10 10 -#define IRQ_GPIO11_27 11 -#define IRQ_LCD 12 /* LCD controller */ -#define IRQ_Ser0UDC 13 /* Ser. port 0 UDC */ -#define IRQ_Ser1SDLC 14 /* Ser. port 1 SDLC */ -#define IRQ_Ser1UART 15 /* Ser. port 1 UART */ -#define IRQ_Ser2ICP 16 /* Ser. port 2 ICP */ -#define IRQ_Ser3UART 17 /* Ser. port 3 UART */ -#define IRQ_Ser4MCP 18 /* Ser. port 4 MCP */ -#define IRQ_Ser4SSP 19 /* Ser. port 4 SSP */ -#define IRQ_DMA0 20 /* DMA controller channel 0 */ -#define IRQ_DMA1 21 /* DMA controller channel 1 */ -#define IRQ_DMA2 22 /* DMA controller channel 2 */ -#define IRQ_DMA3 23 /* DMA controller channel 3 */ -#define IRQ_DMA4 24 /* DMA controller channel 4 */ -#define IRQ_DMA5 25 /* DMA controller channel 5 */ -#define IRQ_OST0 26 /* OS Timer match 0 */ -#define IRQ_OST1 27 /* OS Timer match 1 */ -#define IRQ_OST2 28 /* OS Timer match 2 */ -#define IRQ_OST3 29 /* OS Timer match 3 */ -#define IRQ_RTC1Hz 30 /* RTC 1 Hz clock */ -#define IRQ_RTCAlrm 31 /* RTC Alarm */ - -#define IRQ_GPIO11 32 -#define IRQ_GPIO12 33 -#define IRQ_GPIO13 34 -#define IRQ_GPIO14 35 -#define IRQ_GPIO15 36 -#define IRQ_GPIO16 37 -#define IRQ_GPIO17 38 -#define IRQ_GPIO18 39 -#define IRQ_GPIO19 40 -#define IRQ_GPIO20 41 -#define IRQ_GPIO21 42 -#define IRQ_GPIO22 43 -#define IRQ_GPIO23 44 -#define IRQ_GPIO24 45 -#define IRQ_GPIO25 46 -#define IRQ_GPIO26 47 -#define IRQ_GPIO27 48 - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase IRQ_BOARD_END, but keep it - * within sensible limits. IRQs 49 to 64 are available. - */ -#define IRQ_BOARD_START 49 -#define IRQ_BOARD_END 65 - -#define IRQ_SA1111_START (IRQ_BOARD_END) -#define IRQ_GPAIN0 (IRQ_BOARD_END + 0) -#define IRQ_GPAIN1 (IRQ_BOARD_END + 1) -#define IRQ_GPAIN2 (IRQ_BOARD_END + 2) -#define IRQ_GPAIN3 (IRQ_BOARD_END + 3) -#define IRQ_GPBIN0 (IRQ_BOARD_END + 4) -#define IRQ_GPBIN1 (IRQ_BOARD_END + 5) -#define IRQ_GPBIN2 (IRQ_BOARD_END + 6) -#define IRQ_GPBIN3 (IRQ_BOARD_END + 7) -#define IRQ_GPBIN4 (IRQ_BOARD_END + 8) -#define IRQ_GPBIN5 (IRQ_BOARD_END + 9) -#define IRQ_GPCIN0 (IRQ_BOARD_END + 10) -#define IRQ_GPCIN1 (IRQ_BOARD_END + 11) -#define IRQ_GPCIN2 (IRQ_BOARD_END + 12) -#define IRQ_GPCIN3 (IRQ_BOARD_END + 13) -#define IRQ_GPCIN4 (IRQ_BOARD_END + 14) -#define IRQ_GPCIN5 (IRQ_BOARD_END + 15) -#define IRQ_GPCIN6 (IRQ_BOARD_END + 16) -#define IRQ_GPCIN7 (IRQ_BOARD_END + 17) -#define IRQ_MSTXINT (IRQ_BOARD_END + 18) -#define IRQ_MSRXINT (IRQ_BOARD_END + 19) -#define IRQ_MSSTOPERRINT (IRQ_BOARD_END + 20) -#define IRQ_TPTXINT (IRQ_BOARD_END + 21) -#define IRQ_TPRXINT (IRQ_BOARD_END + 22) -#define IRQ_TPSTOPERRINT (IRQ_BOARD_END + 23) -#define SSPXMTINT (IRQ_BOARD_END + 24) -#define SSPRCVINT (IRQ_BOARD_END + 25) -#define SSPROR (IRQ_BOARD_END + 26) -#define AUDXMTDMADONEA (IRQ_BOARD_END + 32) -#define AUDRCVDMADONEA (IRQ_BOARD_END + 33) -#define AUDXMTDMADONEB (IRQ_BOARD_END + 34) -#define AUDRCVDMADONEB (IRQ_BOARD_END + 35) -#define AUDTFSR (IRQ_BOARD_END + 36) -#define AUDRFSR (IRQ_BOARD_END + 37) -#define AUDTUR (IRQ_BOARD_END + 38) -#define AUDROR (IRQ_BOARD_END + 39) -#define AUDDTS (IRQ_BOARD_END + 40) -#define AUDRDD (IRQ_BOARD_END + 41) -#define AUDSTO (IRQ_BOARD_END + 42) -#define IRQ_USBPWR (IRQ_BOARD_END + 43) -#define IRQ_HCIM (IRQ_BOARD_END + 44) -#define IRQ_HCIBUFFACC (IRQ_BOARD_END + 45) -#define IRQ_HCIRMTWKP (IRQ_BOARD_END + 46) -#define IRQ_NHCIMFCIR (IRQ_BOARD_END + 47) -#define IRQ_USB_PORT_RESUME (IRQ_BOARD_END + 48) -#define IRQ_S0_READY_NINT (IRQ_BOARD_END + 49) -#define IRQ_S1_READY_NINT (IRQ_BOARD_END + 50) -#define IRQ_S0_CD_VALID (IRQ_BOARD_END + 51) -#define IRQ_S1_CD_VALID (IRQ_BOARD_END + 52) -#define IRQ_S0_BVD1_STSCHG (IRQ_BOARD_END + 53) -#define IRQ_S1_BVD1_STSCHG (IRQ_BOARD_END + 54) - -#define IRQ_LOCOMO_START (IRQ_BOARD_END) -#define IRQ_LOCOMO_KEY (IRQ_BOARD_END + 0) -#define IRQ_LOCOMO_GPIO0 (IRQ_BOARD_END + 1) -#define IRQ_LOCOMO_GPIO1 (IRQ_BOARD_END + 2) -#define IRQ_LOCOMO_GPIO2 (IRQ_BOARD_END + 3) -#define IRQ_LOCOMO_GPIO3 (IRQ_BOARD_END + 4) -#define IRQ_LOCOMO_GPIO4 (IRQ_BOARD_END + 5) -#define IRQ_LOCOMO_GPIO5 (IRQ_BOARD_END + 6) -#define IRQ_LOCOMO_GPIO6 (IRQ_BOARD_END + 7) -#define IRQ_LOCOMO_GPIO7 (IRQ_BOARD_END + 8) -#define IRQ_LOCOMO_GPIO8 (IRQ_BOARD_END + 9) -#define IRQ_LOCOMO_GPIO9 (IRQ_BOARD_END + 10) -#define IRQ_LOCOMO_GPIO10 (IRQ_BOARD_END + 11) -#define IRQ_LOCOMO_GPIO11 (IRQ_BOARD_END + 12) -#define IRQ_LOCOMO_GPIO12 (IRQ_BOARD_END + 13) -#define IRQ_LOCOMO_GPIO13 (IRQ_BOARD_END + 14) -#define IRQ_LOCOMO_GPIO14 (IRQ_BOARD_END + 15) -#define IRQ_LOCOMO_GPIO15 (IRQ_BOARD_END + 16) -#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17) -#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18) -#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19) -#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20) -#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21) - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_S1_BVD1_STSCHG + 1) -#elif defined(CONFIG_SA1100_H3800) -#define NR_IRQS (IRQ_BOARD_END) -#elif defined(CONFIG_SHARP_LOCOMO) -#define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) -#else -#define NR_IRQS (IRQ_BOARD_START) -#endif - -/* - * Board specific IRQs. Define them here. - * Do not surround them with ifdefs. - */ -#define IRQ_NEPONSET_SMC9196 (IRQ_BOARD_START + 0) -#define IRQ_NEPONSET_USAR (IRQ_BOARD_START + 1) -#define IRQ_NEPONSET_SA1111 (IRQ_BOARD_START + 2) - -/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */ -#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0) -#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) -#define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) -#define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) - -/* H3800-specific IRQs (CONFIG_SA1100_H3800) */ -#define H3800_KPIO_IRQ_START (IRQ_BOARD_START) -#define IRQ_H3800_KEY (IRQ_BOARD_START + 0) -#define IRQ_H3800_SPI (IRQ_BOARD_START + 1) -#define IRQ_H3800_OWM (IRQ_BOARD_START + 2) -#define IRQ_H3800_ADC (IRQ_BOARD_START + 3) -#define IRQ_H3800_UART_0 (IRQ_BOARD_START + 4) -#define IRQ_H3800_UART_1 (IRQ_BOARD_START + 5) -#define IRQ_H3800_TIMER_0 (IRQ_BOARD_START + 6) -#define IRQ_H3800_TIMER_1 (IRQ_BOARD_START + 7) -#define IRQ_H3800_TIMER_2 (IRQ_BOARD_START + 8) -#define H3800_KPIO_IRQ_COUNT 9 - -#define H3800_GPIO_IRQ_START (IRQ_BOARD_START + 9) -#define IRQ_H3800_PEN (IRQ_BOARD_START + 9) -#define IRQ_H3800_SD_DETECT (IRQ_BOARD_START + 10) -#define IRQ_H3800_EAR_IN (IRQ_BOARD_START + 11) -#define IRQ_H3800_USB_DETECT (IRQ_BOARD_START + 12) -#define IRQ_H3800_SD_CON_SLT (IRQ_BOARD_START + 13) -#define H3800_GPIO_IRQ_COUNT 5 diff --git a/include/asm-arm/arch-sa1100/jornada720.h b/include/asm-arm/arch-sa1100/jornada720.h deleted file mode 100644 index 45d2bb59f9d0..000000000000 --- a/include/asm-arm/arch-sa1100/jornada720.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-sa1100/jornada720.h - * - * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728 - * - * Copyright (C) 2007 Kristoffer Ericson - * Copyright (C) 2000 John Ankcorn - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - - /* HP Jornada 7xx microprocessor commands */ -#define GETBATTERYDATA 0xc0 -#define GETSCANKEYCODE 0x90 -#define GETTOUCHSAMPLES 0xa0 -#define GETCONTRAST 0xD0 -#define SETCONTRAST 0xD1 -#define GETBRIGHTNESS 0xD2 -#define SETBRIGHTNESS 0xD3 -#define CONTRASTOFF 0xD8 -#define BRIGHTNESSOFF 0xD9 -#define PWMOFF 0xDF -#define TXDUMMY 0x11 -#define ERRORCODE 0x00 diff --git a/include/asm-arm/arch-sa1100/lart.h b/include/asm-arm/arch-sa1100/lart.h deleted file mode 100644 index 8a5482d908db..000000000000 --- a/include/asm-arm/arch-sa1100/lart.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _INCLUDE_LART_H -#define _INCLUDE_LART_H - -#define LART_GPIO_ETH0 GPIO_GPIO0 -#define LART_IRQ_ETH0 IRQ_GPIO0 - -#define LART_GPIO_IDE GPIO_GPIO1 -#define LART_IRQ_IDE IRQ_GPIO1 - -#define LART_GPIO_UCB1200 GPIO_GPIO18 -#define LART_IRQ_UCB1200 IRQ_GPIO18 - -#endif diff --git a/include/asm-arm/arch-sa1100/mcp.h b/include/asm-arm/arch-sa1100/mcp.h deleted file mode 100644 index f58a22755c61..000000000000 --- a/include/asm-arm/arch-sa1100/mcp.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/mcp.h - * - * Copyright (C) 2005 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_ARM_ARCH_MCP_H -#define __ASM_ARM_ARCH_MCP_H - -#include - -struct mcp_plat_data { - u32 mccr0; - u32 mccr1; - unsigned int sclk_rate; -}; - -#endif diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h deleted file mode 100644 index 0e907fc6d42a..000000000000 --- a/include/asm-arm/arch-sa1100/memory.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/memory.h - * - * Copyright (C) 1999-2000 Nicolas Pitre - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset is 0xc0000000 on the SA1100 - */ -#define PHYS_OFFSET UL(0xc0000000) - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_SA1111 -void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); - -#define arch_adjust_zones(node, size, holes) \ - sa1111_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) - -#endif -#endif - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * On the SA1100, bus addresses are equivalent to physical addresses. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much convenient to use Linux's NUMA support to implement our - * memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ -#define NODE_MEM_SIZE_BITS 27 - -/* - * Cache flushing area - SA1100 zero bank - */ -#define FLUSH_BASE_PHYS 0xe0000000 -#define FLUSH_BASE 0xf5000000 -#define FLUSH_BASE_MINICACHE 0xf5100000 - -#endif diff --git a/include/asm-arm/arch-sa1100/mtd-xip.h b/include/asm-arm/arch-sa1100/mtd-xip.h deleted file mode 100644 index 80cfdac2b944..000000000000 --- a/include/asm-arm/arch-sa1100/mtd-xip.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ - */ - -#ifndef __ARCH_SA1100_MTD_XIP_H__ -#define __ARCH_SA1100_MTD_XIP_H__ - -#define xip_irqpending() (ICIP & ICMR) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() (OSCR) -#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) - -#endif /* __ARCH_SA1100_MTD_XIP_H__ */ diff --git a/include/asm-arm/arch-sa1100/neponset.h b/include/asm-arm/arch-sa1100/neponset.h deleted file mode 100644 index 09ec9e2bd182..000000000000 --- a/include/asm-arm/arch-sa1100/neponset.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/neponset.h - * - * Created 2000/06/05 by Nicolas Pitre - * - * This file contains the hardware specific definitions for Assabet - * Only include this file from SA1100-specific files. - * - * 2000/05/23 John Dorsey - * Definitions for Neponset added. - */ -#ifndef __ASM_ARCH_NEPONSET_H -#define __ASM_ARCH_NEPONSET_H - -/* - * Neponset definitions: - */ - -#define NEPONSET_CPLD_BASE (0x10000000) -#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000) -#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE) - -#define _IRR 0x10000024 /* Interrupt Reason Register */ -#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */ -#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */ -#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */ -#define _NCR_0 0x100000a0 /* Control Register (RW) */ -#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */ -#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */ -#define _SWPK 0x10000020 /* Switch pack (RO) */ -#define _WHOAMI 0x10000000 /* System ID Register (RO) */ - -#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */ - -#define IRR (*((volatile u_char *) Nep_p2v(_IRR))) -#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL))) -#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0))) -#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1))) -#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0))) -#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT))) -#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN))) -#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK))) -#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI))) - -#define LEDS (*((volatile Word *) Nep_p2v(_LEDS))) - -#define IRR_ETHERNET (1<<0) -#define IRR_USAR (1<<1) -#define IRR_SA1111 (1<<2) - -#define AUD_SEL_1341 (1<<0) -#define AUD_MUTE_1341 (1<<1) - -#define MDM_CTL0_RTS1 (1 << 0) -#define MDM_CTL0_DTR1 (1 << 1) -#define MDM_CTL0_RTS2 (1 << 2) -#define MDM_CTL0_DTR2 (1 << 3) - -#define MDM_CTL1_CTS1 (1 << 0) -#define MDM_CTL1_DSR1 (1 << 1) -#define MDM_CTL1_DCD1 (1 << 2) -#define MDM_CTL1_CTS2 (1 << 3) -#define MDM_CTL1_DSR2 (1 << 4) -#define MDM_CTL1_DCD2 (1 << 5) - -#define NCR_GP01_OFF (1<<0) -#define NCR_TP_PWR_EN (1<<1) -#define NCR_MS_PWR_EN (1<<2) -#define NCR_ENET_OSC_EN (1<<3) -#define NCR_SPI_KB_WK_UP (1<<4) -#define NCR_A0VPP (1<<5) -#define NCR_A1VPP (1<<6) - -#endif diff --git a/include/asm-arm/arch-sa1100/shannon.h b/include/asm-arm/arch-sa1100/shannon.h deleted file mode 100644 index ec27d6e12140..000000000000 --- a/include/asm-arm/arch-sa1100/shannon.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _INCLUDE_SHANNON_H -#define _INCLUDE_SHANNON_H - -/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT, - * written by */ - -#define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */ -#define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */ -/* lcd lower = GPIO 2-9 */ -#define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */ -#define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */ -#define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */ -#define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */ -#define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */ -#define SHANNON_IRQ_GPIO_SPI_RTS IRQ_GPIO14 -#define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */ -#define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */ -#define SHANNON_IRQ_GPIO_IRQ_CODEC IRQ_GPIO16 -#define SHANNON_GPIO_DSP_RESET GPIO_GPIO (17) /* Output - Drive low to reset the DSP */ -#define SHANNON_GPIO_CODEC_RESET GPIO_GPIO (18) /* Output - Drive low to reset the UCB1x00 */ -#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */ -#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */ -#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */ -#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */ -/* XXX GPIO 23 unaccounted for */ -#define SHANNON_GPIO_EJECT_0 GPIO_GPIO (24) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_0 IRQ_GPIO24 -#define SHANNON_GPIO_EJECT_1 GPIO_GPIO (25) /* in */ -#define SHANNON_IRQ_GPIO_EJECT_1 IRQ_GPIO25 -#define SHANNON_GPIO_RDY_0 GPIO_GPIO (26) /* in */ -#define SHANNON_IRQ_GPIO_RDY_0 IRQ_GPIO26 -#define SHANNON_GPIO_RDY_1 GPIO_GPIO (27) /* in */ -#define SHANNON_IRQ_GPIO_RDY_1 IRQ_GPIO27 - -/* MCP UCB codec GPIO pins... */ - -#define SHANNON_UCB_GPIO_BACKLIGHT 9 -#define SHANNON_UCB_GPIO_BRIGHT_MASK 7 -#define SHANNON_UCB_GPIO_BRIGHT 6 -#define SHANNON_UCB_GPIO_CONTRAST_MASK 0x3f -#define SHANNON_UCB_GPIO_CONTRAST 0 - -#endif diff --git a/include/asm-arm/arch-sa1100/simpad.h b/include/asm-arm/arch-sa1100/simpad.h deleted file mode 100644 index 034301d23f60..000000000000 --- a/include/asm-arm/arch-sa1100/simpad.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/simpad.h - * - * based of assabet.h same as HUW_Webpanel - * - * This file contains the hardware specific definitions for SIMpad - * - * 2001/05/14 Juergen Messerer - */ - -#ifndef __ASM_ARCH_SIMPAD_H -#define __ASM_ARCH_SIMPAD_H - - -#define GPIO_UART1_RTS GPIO_GPIO14 -#define GPIO_UART1_DTR GPIO_GPIO7 -#define GPIO_UART1_CTS GPIO_GPIO8 -#define GPIO_UART1_DCD GPIO_GPIO23 -#define GPIO_UART1_DSR GPIO_GPIO6 - -#define GPIO_UART3_RTS GPIO_GPIO12 -#define GPIO_UART3_DTR GPIO_GPIO16 -#define GPIO_UART3_CTS GPIO_GPIO13 -#define GPIO_UART3_DCD GPIO_GPIO18 -#define GPIO_UART3_DSR GPIO_GPIO17 - -#define GPIO_POWER_BUTTON GPIO_GPIO0 -#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */ - -#define IRQ_UART1_CTS IRQ_GPIO15 -#define IRQ_UART1_DCD GPIO_GPIO23 -#define IRQ_UART1_DSR GPIO_GPIO6 -#define IRQ_UART3_CTS GPIO_GPIO13 -#define IRQ_UART3_DCD GPIO_GPIO18 -#define IRQ_UART3_DSR GPIO_GPIO17 - -#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22 -#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0 - - -/*--- PCMCIA ---*/ -#define GPIO_CF_CD GPIO_GPIO24 -#define GPIO_CF_IRQ GPIO_GPIO1 -#define IRQ_GPIO_CF_IRQ IRQ_GPIO1 -#define IRQ_GPIO_CF_CD IRQ_GPIO24 - -/*--- SmartCard ---*/ -#define GPIO_SMART_CARD GPIO_GPIO10 -#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10 - -// CS3 Latch is write only, a shadow is necessary - -#define CS3BUSTYPE unsigned volatile long -#define CS3_BASE 0xf1000000 - -#define VCC_5V_EN 0x0001 // For 5V PCMCIA -#define VCC_3V_EN 0x0002 // FOR 3.3V PCMCIA -#define EN1 0x0004 // This is only for EPROM's -#define EN0 0x0008 // Both should be enable for 3.3V or 5V -#define DISPLAY_ON 0x0010 -#define PCMCIA_BUFF_DIS 0x0020 -#define MQ_RESET 0x0040 -#define PCMCIA_RESET 0x0080 -#define DECT_POWER_ON 0x0100 -#define IRDA_SD 0x0200 // Shutdown for powersave -#define RS232_ON 0x0400 -#define SD_MEDIAQ 0x0800 // Shutdown for powersave -#define LED2_ON 0x1000 -#define IRDA_MODE 0x2000 // Fast/Slow IrDA mode -#define ENABLE_5V 0x4000 // Enable 5V circuit -#define RESET_SIMCARD 0x8000 - -#define RS232_ENABLE 0x0440 -#define PCMCIAMASK 0x402f - - -struct simpad_battery { - unsigned char ac_status; /* line connected yes/no */ - unsigned char status; /* battery loading yes/no */ - unsigned char percentage; /* percentage loaded */ - unsigned short life; /* life till empty */ -}; - -/* These should match the apm_bios.h definitions */ -#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00 -#define SIMPAD_AC_STATUS_AC_ONLINE 0x01 -#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */ -#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff - -/* These bitfields are rarely "or'd" together */ -#define SIMPAD_BATT_STATUS_HIGH 0x01 -#define SIMPAD_BATT_STATUS_LOW 0x02 -#define SIMPAD_BATT_STATUS_CRITICAL 0x04 -#define SIMPAD_BATT_STATUS_CHARGING 0x08 -#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10 -#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */ -#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */ -#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */ -#define SIMPAD_BATT_STATUS_NOBATT 0x80 -#define SIMPAD_BATT_STATUS_UNKNOWN 0xff - -extern int simpad_get_battery(struct simpad_battery* ); - -#endif // __ASM_ARCH_SIMPAD_H - - - - - - - - diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h deleted file mode 100644 index 63375a0c0145..000000000000 --- a/include/asm-arm/arch-sa1100/system.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/system.h - * - * Copyright (c) 1999 Nicolas Pitre - */ -#include - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Use on-chip reset capability */ - RSRR = RSRR_SWR; - } -} diff --git a/include/asm-arm/arch-sa1100/timex.h b/include/asm-arm/arch-sa1100/timex.h deleted file mode 100644 index 837be9b797dd..000000000000 --- a/include/asm-arm/arch-sa1100/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/timex.h - * - * SA1100 architecture timex specifications - * - * Copyright (C) 1998 - */ - -/* - * SA1100 timer - */ -#define CLOCK_TICK_RATE 3686400 diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h deleted file mode 100644 index 17e64d232e7d..000000000000 --- a/include/asm-arm/arch-sa1100/uncompress.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/uncompress.h - * - * (C) 1999 Nicolas Pitre - * - * Reorganised to be machine independent. - */ - -#include "hardware.h" - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - */ - -#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) - -static void putc(int c) -{ - unsigned long serial_port; - - do { - serial_port = _Ser3UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - serial_port = _Ser1UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - serial_port = _Ser2UTCR0; - if (UART(UTCR3) & UTCR3_TXE) break; - return; - } while (0); - - /* wait for space in the UART's transmitter */ - while (!(UART(UTSR1) & UTSR1_TNF)) - barrier(); - - /* send the character out. */ - UART(UTDR) = c; -} - -static inline void flush(void) -{ -} - -/* - * Nothing to do for these - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-sa1100/vmalloc.h b/include/asm-arm/arch-sa1100/vmalloc.h deleted file mode 100644 index 2fb1c6f3aa1b..000000000000 --- a/include/asm-arm/arch-sa1100/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-sa1100/vmalloc.h - */ -#define VMALLOC_END (0xe8000000) diff --git a/include/asm-arm/arch-shark/debug-macro.S b/include/asm-arm/arch-shark/debug-macro.S deleted file mode 100644 index 7cb37f78825e..000000000000 --- a/include/asm-arm/arch-shark/debug-macro.S +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/arch-shark/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mov \rx, #0xe0000000 - orr \rx, \rx, #0x000003f8 - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - - .macro busyuart,rd,rx - mov \rd, #0 -1001: add \rd, \rd, #1 - teq \rd, #0x10000 - bne 1001b - .endm - - .macro waituart,rd,rx - .endm diff --git a/include/asm-arm/arch-shark/dma.h b/include/asm-arm/arch-shark/dma.h deleted file mode 100644 index fc985d5e62af..000000000000 --- a/include/asm-arm/arch-shark/dma.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/dma.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -/* Use only the lowest 4MB, nothing else works. - * The rest is not DMAable. See dev / .properties - * in OpenFirmware. - */ -#define MAX_DMA_ADDRESS 0xC0400000 -#define MAX_DMA_CHANNELS 8 -#define DMA_ISA_CASCADE 4 - -#endif /* _ASM_ARCH_DMA_H */ - diff --git a/include/asm-arm/arch-shark/entry-macro.S b/include/asm-arm/arch-shark/entry-macro.S deleted file mode 100644 index 82463f30f3df..000000000000 --- a/include/asm-arm/arch-shark/entry-macro.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * include/asm-arm/arch-shark/entry-macro.S - * - * Low-level IRQ helper macros for Shark platform - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xe0000000 - - mov \irqstat, #0x0C - strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 43f - and \irqnr, \irqnr, #7 - teq \irqnr, #2 - bne 44f -43: mov \irqstat, #0x0C - strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8 - and \irqstat, \irqnr, #0x80 - teq \irqstat, #0 - beq 44f - and \irqnr, \irqnr, #7 - add \irqnr, \irqnr, #8 -44: teq \irqstat, #0 - .endm - diff --git a/include/asm-arm/arch-shark/hardware.h b/include/asm-arm/arch-shark/hardware.h deleted file mode 100644 index ecba45260898..000000000000 --- a/include/asm-arm/arch-shark/hardware.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/hardware.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/hardware.h - * Copyright (C) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#ifndef __ASSEMBLY__ - -/* - * Mapping areas - */ -#define IO_BASE 0xe0000000 - -#else - -#define IO_BASE 0 - -#endif - -#define IO_SIZE 0x08000000 -#define IO_START 0x40000000 -#define ROMCARD_SIZE 0x08000000 -#define ROMCARD_START 0x10000000 - -#define PCIO_BASE 0xe0000000 - - -/* defines for the Framebuffer */ -#define FB_START 0x06000000 -#define FB_SIZE 0x01000000 - -#define UNCACHEABLE_ADDR 0xdf010000 - -#define SEQUOIA_LED_GREEN (1<<6) -#define SEQUOIA_LED_AMBER (1<<5) -#define SEQUOIA_LED_BACK (1<<7) - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x50000000 -#define PCIMEM_BASE 0xe8000000 - -#endif - diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h deleted file mode 100644 index b11d7860a9d3..000000000000 --- a/include/asm-arm/arch-shark/io.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/io.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/io.h - * Copyright (C) 1997,1998 Russell King - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -#define __io(a) ((void __iomem *)(PCIO_BASE + (a))) - - -static inline unsigned int __ioaddr (unsigned int port) \ -{ \ - if (__PORT_PCIO(port)) \ - return (unsigned int)(PCIO_BASE + (port)); \ - else \ - return (unsigned int)(IO_BASE + (port)); \ -} - -#define __mem_pci(addr) (addr) - -/* - * Translated address IO functions - * - * IO address has already been translated to a virtual address - */ -#define outb_t(v,p) \ - (*(volatile unsigned char *)(p) = (v)) - -#define inb_t(p) \ - (*(volatile unsigned char *)(p)) - -#define outl_t(v,p) \ - (*(volatile unsigned long *)(p) = (v)) - -#define inl_t(p) \ - (*(volatile unsigned long *)(p)) - -#endif diff --git a/include/asm-arm/arch-shark/irqs.h b/include/asm-arm/arch-shark/irqs.h deleted file mode 100644 index b36cc975b290..000000000000 --- a/include/asm-arm/arch-shark/irqs.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/irqs.h - * - * by Alexander Schulz - */ - -#define NR_IRQS 16 - -#define IRQ_ISA_KEYBOARD 1 -#define RTC_IRQ 8 -#define I8042_KBD_IRQ 1 -#define I8042_AUX_IRQ 12 -#define IRQ_HARDDISK 14 diff --git a/include/asm-arm/arch-shark/memory.h b/include/asm-arm/arch-shark/memory.h deleted file mode 100644 index 6968d6103ea0..000000000000 --- a/include/asm-arm/arch-shark/memory.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/memory.h - * - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa110/memory.h - * Copyright (c) 1996-1999 Russell King. - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x08000000) - -#ifndef __ASSEMBLY__ - -static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) -{ - if (node != 0) return; - /* Only the first 4 MB (=1024 Pages) are usable for DMA */ - zone_size[1] = zone_size[0] - 1024; - zone_size[0] = 1024; - zhole_size[1] = zhole_size[0]; - zhole_size[0] = 0; -} - -#define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) - -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1) - -#endif - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* - * Cache flushing area - */ -#define FLUSH_BASE_PHYS 0x80000000 -#define FLUSH_BASE 0xdf000000 - -#endif diff --git a/include/asm-arm/arch-shark/system.h b/include/asm-arm/arch-shark/system.h deleted file mode 100644 index f12d771ab4ce..000000000000 --- a/include/asm-arm/arch-shark/system.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/system.h - * - * by Alexander Schulz - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include - -static void arch_reset(char mode) -{ - short temp; - local_irq_disable(); - /* Reset the Machine via pc[3] of the sequoia chipset */ - outw(0x09,0x24); - temp=inw(0x26); - temp = temp | (1<<3) | (1<<10); - outw(0x09,0x24); - outw(temp,0x26); - -} - -static inline void arch_idle(void) -{ -} - -#endif diff --git a/include/asm-arm/arch-shark/timex.h b/include/asm-arm/arch-shark/timex.h deleted file mode 100644 index 0d02d255513b..000000000000 --- a/include/asm-arm/arch-shark/timex.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/timex.h - * - * by Alexander Schulz - */ - -#define CLOCK_TICK_RATE 1193180 diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h deleted file mode 100644 index 7eca6534f1bb..000000000000 --- a/include/asm-arm/arch-shark/uncompress.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/uncompress.h - * by Alexander Schulz - * - * derived from: - * linux/include/asm-arm/arch-ebsa285/uncompress.h - * Copyright (C) 1996,1997,1998 Russell King - */ - -#define SERIAL_BASE ((volatile unsigned char *)0x400003f8) - -static inline void putc(int c) -{ - int t; - - SERIAL_BASE[0] = c; - t=0x10000; - while (t--); -} - -static inline void flush(void) -{ -} - -#ifdef DEBUG -static void putn(unsigned long z) -{ - int i; - char x; - - putc('0'); - putc('x'); - for (i=0;i<8;i++) { - x='0'+((z>>((7-i)*4))&0xf); - if (x>'9') x=x-'0'+'A'-10; - putc(x); - } -} - -static void putr() -{ - putc('\n'); - putc('\r'); -} -#endif - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-shark/vmalloc.h b/include/asm-arm/arch-shark/vmalloc.h deleted file mode 100644 index fac37c636b38..000000000000 --- a/include/asm-arm/arch-shark/vmalloc.h +++ /dev/null @@ -1,4 +0,0 @@ -/* - * linux/include/asm-arm/arch-shark/vmalloc.h - */ -#define VMALLOC_END (PAGE_OFFSET + 0x10000000) diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S deleted file mode 100644 index fe106d184e62..000000000000 --- a/include/asm-arm/arch-versatile/debug-macro.S +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/include/asm-arm/arch-versatile/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base - orr \rx, \rx, #0x001F0000 - orr \rx, \rx, #0x00001000 - .endm - -#include diff --git a/include/asm-arm/arch-versatile/dma.h b/include/asm-arm/arch-versatile/dma.h deleted file mode 100644 index 642577348623..000000000000 --- a/include/asm-arm/arch-versatile/dma.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/dma.h - * - * Copyright (C) 2003 ARM Limited. - * Copyright (C) 1997,1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ diff --git a/include/asm-arm/arch-versatile/entry-macro.S b/include/asm-arm/arch-versatile/entry-macro.S deleted file mode 100644 index cd114169c3e6..000000000000 --- a/include/asm-arm/arch-versatile/entry-macro.S +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-arm/arch-versatile/entry-macro.S - * - * Low-level IRQ helper macros for Versatile platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(VERSATILE_VIC_BASE) - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #VIC_IRQ_STATUS] @ get masked status - mov \irqnr, #0 - teq \irqstat, #0 - beq 1003f - -1001: tst \irqstat, #15 - bne 1002f - add \irqnr, \irqnr, #4 - movs \irqstat, \irqstat, lsr #4 - bne 1001b -1002: tst \irqstat, #1 - bne 1003f - add \irqnr, \irqnr, #1 - movs \irqstat, \irqstat, lsr #1 - bne 1002b -1003: /* EQ will be set if no irqs pending */ - -@ clz \irqnr, \irqstat -@1003: /* EQ will be set if we reach MAXIRQNUM */ - .endm - diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h deleted file mode 100644 index edc06598d187..000000000000 --- a/include/asm-arm/arch-versatile/hardware.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/hardware.h - * - * This file contains the hardware definitions of the Versatile boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include - -/* - * PCI space virtual addresses - */ -#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul -#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul - -#if 0 -#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000 -#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000 -#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000 - -#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0 -#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1 -#endif - -/* CIK guesswork */ -#define PCIBIOS_MIN_IO 0x44000000 -#define PCIBIOS_MIN_MEM 0x50000000 - -#define pcibios_assign_all_busses() 1 - -/* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) - -#endif diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h deleted file mode 100644 index c4d01948e00b..000000000000 --- a/include/asm-arm/arch-versatile/io.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/io.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-versatile/irqs.h b/include/asm-arm/arch-versatile/irqs.h deleted file mode 100644 index f7263b99403b..000000000000 --- a/include/asm-arm/arch-versatile/irqs.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/irqs.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -/* - * IRQ interrupts definitions are the same as the INT definitions - * held within platform.h - */ -#define IRQ_VIC_START 0 -#define IRQ_WDOGINT (IRQ_VIC_START + INT_WDOGINT) -#define IRQ_SOFTINT (IRQ_VIC_START + INT_SOFTINT) -#define IRQ_COMMRx (IRQ_VIC_START + INT_COMMRx) -#define IRQ_COMMTx (IRQ_VIC_START + INT_COMMTx) -#define IRQ_TIMERINT0_1 (IRQ_VIC_START + INT_TIMERINT0_1) -#define IRQ_TIMERINT2_3 (IRQ_VIC_START + INT_TIMERINT2_3) -#define IRQ_GPIOINT0 (IRQ_VIC_START + INT_GPIOINT0) -#define IRQ_GPIOINT1 (IRQ_VIC_START + INT_GPIOINT1) -#define IRQ_GPIOINT2 (IRQ_VIC_START + INT_GPIOINT2) -#define IRQ_GPIOINT3 (IRQ_VIC_START + INT_GPIOINT3) -#define IRQ_RTCINT (IRQ_VIC_START + INT_RTCINT) -#define IRQ_SSPINT (IRQ_VIC_START + INT_SSPINT) -#define IRQ_UARTINT0 (IRQ_VIC_START + INT_UARTINT0) -#define IRQ_UARTINT1 (IRQ_VIC_START + INT_UARTINT1) -#define IRQ_UARTINT2 (IRQ_VIC_START + INT_UARTINT2) -#define IRQ_SCIINT (IRQ_VIC_START + INT_SCIINT) -#define IRQ_CLCDINT (IRQ_VIC_START + INT_CLCDINT) -#define IRQ_DMAINT (IRQ_VIC_START + INT_DMAINT) -#define IRQ_PWRFAILINT (IRQ_VIC_START + INT_PWRFAILINT) -#define IRQ_MBXINT (IRQ_VIC_START + INT_MBXINT) -#define IRQ_GNDINT (IRQ_VIC_START + INT_GNDINT) -#define IRQ_VICSOURCE21 (IRQ_VIC_START + INT_VICSOURCE21) -#define IRQ_VICSOURCE22 (IRQ_VIC_START + INT_VICSOURCE22) -#define IRQ_VICSOURCE23 (IRQ_VIC_START + INT_VICSOURCE23) -#define IRQ_VICSOURCE24 (IRQ_VIC_START + INT_VICSOURCE24) -#define IRQ_VICSOURCE25 (IRQ_VIC_START + INT_VICSOURCE25) -#define IRQ_VICSOURCE26 (IRQ_VIC_START + INT_VICSOURCE26) -#define IRQ_VICSOURCE27 (IRQ_VIC_START + INT_VICSOURCE27) -#define IRQ_VICSOURCE28 (IRQ_VIC_START + INT_VICSOURCE28) -#define IRQ_VICSOURCE29 (IRQ_VIC_START + INT_VICSOURCE29) -#define IRQ_VICSOURCE30 (IRQ_VIC_START + INT_VICSOURCE30) -#define IRQ_VICSOURCE31 (IRQ_VIC_START + INT_VICSOURCE31) -#define IRQ_VIC_END (IRQ_VIC_START + 31) - -#define IRQMASK_WDOGINT INTMASK_WDOGINT -#define IRQMASK_SOFTINT INTMASK_SOFTINT -#define IRQMASK_COMMRx INTMASK_COMMRx -#define IRQMASK_COMMTx INTMASK_COMMTx -#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 -#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 -#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0 -#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1 -#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2 -#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3 -#define IRQMASK_RTCINT INTMASK_RTCINT -#define IRQMASK_SSPINT INTMASK_SSPINT -#define IRQMASK_UARTINT0 INTMASK_UARTINT0 -#define IRQMASK_UARTINT1 INTMASK_UARTINT1 -#define IRQMASK_UARTINT2 INTMASK_UARTINT2 -#define IRQMASK_SCIINT INTMASK_SCIINT -#define IRQMASK_CLCDINT INTMASK_CLCDINT -#define IRQMASK_DMAINT INTMASK_DMAINT -#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT -#define IRQMASK_MBXINT INTMASK_MBXINT -#define IRQMASK_GNDINT INTMASK_GNDINT -#define IRQMASK_VICSOURCE21 INTMASK_VICSOURCE21 -#define IRQMASK_VICSOURCE22 INTMASK_VICSOURCE22 -#define IRQMASK_VICSOURCE23 INTMASK_VICSOURCE23 -#define IRQMASK_VICSOURCE24 INTMASK_VICSOURCE24 -#define IRQMASK_VICSOURCE25 INTMASK_VICSOURCE25 -#define IRQMASK_VICSOURCE26 INTMASK_VICSOURCE26 -#define IRQMASK_VICSOURCE27 INTMASK_VICSOURCE27 -#define IRQMASK_VICSOURCE28 INTMASK_VICSOURCE28 -#define IRQMASK_VICSOURCE29 INTMASK_VICSOURCE29 -#define IRQMASK_VICSOURCE30 INTMASK_VICSOURCE30 -#define IRQMASK_VICSOURCE31 INTMASK_VICSOURCE31 - -/* - * FIQ interrupts definitions are the same as the INT definitions. - */ -#define FIQ_WDOGINT INT_WDOGINT -#define FIQ_SOFTINT INT_SOFTINT -#define FIQ_COMMRx INT_COMMRx -#define FIQ_COMMTx INT_COMMTx -#define FIQ_TIMERINT0_1 INT_TIMERINT0_1 -#define FIQ_TIMERINT2_3 INT_TIMERINT2_3 -#define FIQ_GPIOINT0 INT_GPIOINT0 -#define FIQ_GPIOINT1 INT_GPIOINT1 -#define FIQ_GPIOINT2 INT_GPIOINT2 -#define FIQ_GPIOINT3 INT_GPIOINT3 -#define FIQ_RTCINT INT_RTCINT -#define FIQ_SSPINT INT_SSPINT -#define FIQ_UARTINT0 INT_UARTINT0 -#define FIQ_UARTINT1 INT_UARTINT1 -#define FIQ_UARTINT2 INT_UARTINT2 -#define FIQ_SCIINT INT_SCIINT -#define FIQ_CLCDINT INT_CLCDINT -#define FIQ_DMAINT INT_DMAINT -#define FIQ_PWRFAILINT INT_PWRFAILINT -#define FIQ_MBXINT INT_MBXINT -#define FIQ_GNDINT INT_GNDINT -#define FIQ_VICSOURCE21 INT_VICSOURCE21 -#define FIQ_VICSOURCE22 INT_VICSOURCE22 -#define FIQ_VICSOURCE23 INT_VICSOURCE23 -#define FIQ_VICSOURCE24 INT_VICSOURCE24 -#define FIQ_VICSOURCE25 INT_VICSOURCE25 -#define FIQ_VICSOURCE26 INT_VICSOURCE26 -#define FIQ_VICSOURCE27 INT_VICSOURCE27 -#define FIQ_VICSOURCE28 INT_VICSOURCE28 -#define FIQ_VICSOURCE29 INT_VICSOURCE29 -#define FIQ_VICSOURCE30 INT_VICSOURCE30 -#define FIQ_VICSOURCE31 INT_VICSOURCE31 - - -#define FIQMASK_WDOGINT INTMASK_WDOGINT -#define FIQMASK_SOFTINT INTMASK_SOFTINT -#define FIQMASK_COMMRx INTMASK_COMMRx -#define FIQMASK_COMMTx INTMASK_COMMTx -#define FIQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 -#define FIQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 -#define FIQMASK_GPIOINT0 INTMASK_GPIOINT0 -#define FIQMASK_GPIOINT1 INTMASK_GPIOINT1 -#define FIQMASK_GPIOINT2 INTMASK_GPIOINT2 -#define FIQMASK_GPIOINT3 INTMASK_GPIOINT3 -#define FIQMASK_RTCINT INTMASK_RTCINT -#define FIQMASK_SSPINT INTMASK_SSPINT -#define FIQMASK_UARTINT0 INTMASK_UARTINT0 -#define FIQMASK_UARTINT1 INTMASK_UARTINT1 -#define FIQMASK_UARTINT2 INTMASK_UARTINT2 -#define FIQMASK_SCIINT INTMASK_SCIINT -#define FIQMASK_CLCDINT INTMASK_CLCDINT -#define FIQMASK_DMAINT INTMASK_DMAINT -#define FIQMASK_PWRFAILINT INTMASK_PWRFAILINT -#define FIQMASK_MBXINT INTMASK_MBXINT -#define FIQMASK_GNDINT INTMASK_GNDINT -#define FIQMASK_VICSOURCE21 INTMASK_VICSOURCE21 -#define FIQMASK_VICSOURCE22 INTMASK_VICSOURCE22 -#define FIQMASK_VICSOURCE23 INTMASK_VICSOURCE23 -#define FIQMASK_VICSOURCE24 INTMASK_VICSOURCE24 -#define FIQMASK_VICSOURCE25 INTMASK_VICSOURCE25 -#define FIQMASK_VICSOURCE26 INTMASK_VICSOURCE26 -#define FIQMASK_VICSOURCE27 INTMASK_VICSOURCE27 -#define FIQMASK_VICSOURCE28 INTMASK_VICSOURCE28 -#define FIQMASK_VICSOURCE29 INTMASK_VICSOURCE29 -#define FIQMASK_VICSOURCE30 INTMASK_VICSOURCE30 -#define FIQMASK_VICSOURCE31 INTMASK_VICSOURCE31 - -/* - * Secondary interrupt controller - */ -#define IRQ_SIC_START 32 -#define IRQ_SIC_MMCI0B (IRQ_SIC_START + SIC_INT_MMCI0B) -#define IRQ_SIC_MMCI1B (IRQ_SIC_START + SIC_INT_MMCI1B) -#define IRQ_SIC_KMI0 (IRQ_SIC_START + SIC_INT_KMI0) -#define IRQ_SIC_KMI1 (IRQ_SIC_START + SIC_INT_KMI1) -#define IRQ_SIC_SCI3 (IRQ_SIC_START + SIC_INT_SCI3) -#define IRQ_SIC_UART3 (IRQ_SIC_START + SIC_INT_UART3) -#define IRQ_SIC_CLCD (IRQ_SIC_START + SIC_INT_CLCD) -#define IRQ_SIC_TOUCH (IRQ_SIC_START + SIC_INT_TOUCH) -#define IRQ_SIC_KEYPAD (IRQ_SIC_START + SIC_INT_KEYPAD) -#define IRQ_SIC_DoC (IRQ_SIC_START + SIC_INT_DoC) -#define IRQ_SIC_MMCI0A (IRQ_SIC_START + SIC_INT_MMCI0A) -#define IRQ_SIC_MMCI1A (IRQ_SIC_START + SIC_INT_MMCI1A) -#define IRQ_SIC_AACI (IRQ_SIC_START + SIC_INT_AACI) -#define IRQ_SIC_ETH (IRQ_SIC_START + SIC_INT_ETH) -#define IRQ_SIC_USB (IRQ_SIC_START + SIC_INT_USB) -#define IRQ_SIC_PCI0 (IRQ_SIC_START + SIC_INT_PCI0) -#define IRQ_SIC_PCI1 (IRQ_SIC_START + SIC_INT_PCI1) -#define IRQ_SIC_PCI2 (IRQ_SIC_START + SIC_INT_PCI2) -#define IRQ_SIC_PCI3 (IRQ_SIC_START + SIC_INT_PCI3) -#define IRQ_SIC_END 63 - -#define SIC_IRQMASK_MMCI0B SIC_INTMASK_MMCI0B -#define SIC_IRQMASK_MMCI1B SIC_INTMASK_MMCI1B -#define SIC_IRQMASK_KMI0 SIC_INTMASK_KMI0 -#define SIC_IRQMASK_KMI1 SIC_INTMASK_KMI1 -#define SIC_IRQMASK_SCI3 SIC_INTMASK_SCI3 -#define SIC_IRQMASK_UART3 SIC_INTMASK_UART3 -#define SIC_IRQMASK_CLCD SIC_INTMASK_CLCD -#define SIC_IRQMASK_TOUCH SIC_INTMASK_TOUCH -#define SIC_IRQMASK_KEYPAD SIC_INTMASK_KEYPAD -#define SIC_IRQMASK_DoC SIC_INTMASK_DoC -#define SIC_IRQMASK_MMCI0A SIC_INTMASK_MMCI0A -#define SIC_IRQMASK_MMCI1A SIC_INTMASK_MMCI1A -#define SIC_IRQMASK_AACI SIC_INTMASK_AACI -#define SIC_IRQMASK_ETH SIC_INTMASK_ETH -#define SIC_IRQMASK_USB SIC_INTMASK_USB -#define SIC_IRQMASK_PCI0 SIC_INTMASK_PCI0 -#define SIC_IRQMASK_PCI1 SIC_INTMASK_PCI1 -#define SIC_IRQMASK_PCI2 SIC_INTMASK_PCI2 -#define SIC_IRQMASK_PCI3 SIC_INTMASK_PCI3 - -#define NR_IRQS 64 diff --git a/include/asm-arm/arch-versatile/memory.h b/include/asm-arm/arch-versatile/memory.h deleted file mode 100644 index a9370976cc5e..000000000000 --- a/include/asm-arm/arch-versatile/memory.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/memory.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -/* - * Physical DRAM offset. - */ -#define PHYS_OFFSET UL(0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - -#endif diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h deleted file mode 100644 index 2af9d7c9c63c..000000000000 --- a/include/asm-arm/arch-versatile/platform.h +++ /dev/null @@ -1,510 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/platform.h - * - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __address_h -#define __address_h 1 - -/* - * Memory definitions - */ -#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define VERSATILE_BOOT_ROM_HI 0x30000000 -#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */ -#define VERSATILE_BOOT_ROM_SIZE SZ_64M - -#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */ -#define VERSATILE_SSRAM_SIZE SZ_2M - -#define VERSATILE_FLASH_BASE 0x34000000 -#define VERSATILE_FLASH_SIZE SZ_64M - -/* - * SDRAM - */ -#define VERSATILE_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * Versatile Registers - * ------------------------------------------------------------------------ - * - */ -#define VERSATILE_SYS_ID_OFFSET 0x00 -#define VERSATILE_SYS_SW_OFFSET 0x04 -#define VERSATILE_SYS_LED_OFFSET 0x08 -#define VERSATILE_SYS_OSC0_OFFSET 0x0C - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC1_OFFSET 0x10 -#define VERSATILE_SYS_OSC2_OFFSET 0x14 -#define VERSATILE_SYS_OSC3_OFFSET 0x18 -#define VERSATILE_SYS_OSC4_OFFSET 0x1C -#elif defined(CONFIG_MACH_VERSATILE_AB) -#define VERSATILE_SYS_OSC1_OFFSET 0x1C -#endif - -#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c - -#define VERSATILE_SYS_LOCK_OFFSET 0x20 -#define VERSATILE_SYS_100HZ_OFFSET 0x24 -#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28 -#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C -#define VERSATILE_SYS_FLAGS_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30 -#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34 -#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38 -#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C -#define VERSATILE_SYS_RESETCTL_OFFSET 0x40 -#define VERSATILE_SYS_PCICTL_OFFSET 0x44 -#define VERSATILE_SYS_MCI_OFFSET 0x48 -#define VERSATILE_SYS_FLASH_OFFSET 0x4C -#define VERSATILE_SYS_CLCD_OFFSET 0x50 -#define VERSATILE_SYS_CLCDSER_OFFSET 0x54 -#define VERSATILE_SYS_BOOTCS_OFFSET 0x58 -#define VERSATILE_SYS_24MHz_OFFSET 0x5C -#define VERSATILE_SYS_MISC_OFFSET 0x60 -#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80 -#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84 -#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88 -#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C -#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90 - -#define VERSATILE_SYS_BASE 0x10000000 -#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET) -#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET) -#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET) -#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET) -#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET) - -#if defined(CONFIG_ARCH_VERSATILE_PB) -#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET) -#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET) -#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET) -#endif - -#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET) -#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET) -#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET) -#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET) -#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET) -#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET) -#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET) -#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET) -#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET) -#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET) -#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET) -#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET) -#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET) -#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) -#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET) -#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET) -#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET) -#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET) -#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET) -#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET) -#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET) -#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET) -#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET) -#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET) - -/* - * Values for VERSATILE_SYS_RESET_CTRL - */ -#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03 -#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04 -#define VERSATILE_SYS_CTRL_RESET_POR 0x05 -#define VERSATILE_SYS_CTRL_RESET_DoC 0x06 - -#define VERSATILE_SYS_CTRL_LED (1 << 0) - - -/* ------------------------------------------------------------------------ - * Versatile control registers - * ------------------------------------------------------------------------ - */ - -/* - * VERSATILE_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * VERSATILE_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define VERSATILE_SYS_LOCK_LOCKED (1 << 16) -#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ - -/* - * VERSATILE_SYS_FLASH - */ -#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * VERSATILE_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * VERSATILE peripheral addresses - */ -#define VERSATILE_PCI_CORE_BASE 0x10001000 /* PCI core control */ -#define VERSATILE_I2C_BASE 0x10002000 /* I2C control */ -#define VERSATILE_SIC_BASE 0x10003000 /* Secondary interrupt controller */ -#define VERSATILE_AACI_BASE 0x10004000 /* Audio */ -#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ -#define VERSATILE_KMI0_BASE 0x10006000 /* KMI interface */ -#define VERSATILE_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define VERSATILE_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define VERSATILE_UART3_BASE 0x10009000 /* UART 3 */ -#define VERSATILE_SCI1_BASE 0x1000A000 -#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ - /* 0x1000C000 - 0x1000CFFF = reserved */ -#define VERSATILE_ETH_BASE 0x10010000 /* Ethernet */ -#define VERSATILE_USB_BASE 0x10020000 /* USB */ - /* 0x10030000 - 0x100FFFFF = reserved */ -#define VERSATILE_SMC_BASE 0x10100000 /* SMC */ -#define VERSATILE_MPMC_BASE 0x10110000 /* MPMC */ -#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */ -#define VERSATILE_DMAC_BASE 0x10130000 /* DMA controller */ -#define VERSATILE_VIC_BASE 0x10140000 /* Vectored interrupt controller */ -#define VERSATILE_PERIPH_BASE 0x10150000 /* off-chip peripherals alias from */ - /* 0x10000000 - 0x100FFFFF */ -#define VERSATILE_AHBM_BASE 0x101D0000 /* AHB monitor */ -#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ -#define VERSATILE_WATCHDOG_BASE 0x101E1000 /* Watchdog */ -#define VERSATILE_TIMER0_1_BASE 0x101E2000 /* Timer 0 and 1 */ -#define VERSATILE_TIMER2_3_BASE 0x101E3000 /* Timer 2 and 3 */ -#define VERSATILE_GPIO0_BASE 0x101E4000 /* GPIO port 0 */ -#define VERSATILE_GPIO1_BASE 0x101E5000 /* GPIO port 1 */ -#define VERSATILE_GPIO2_BASE 0x101E6000 /* GPIO port 2 */ -#define VERSATILE_GPIO3_BASE 0x101E7000 /* GPIO port 3 */ -#define VERSATILE_RTC_BASE 0x101E8000 /* Real Time Clock */ - /* 0x101E9000 - reserved */ -#define VERSATILE_SCI_BASE 0x101F0000 /* Smart card controller */ -#define VERSATILE_UART0_BASE 0x101F1000 /* Uart 0 */ -#define VERSATILE_UART1_BASE 0x101F2000 /* Uart 1 */ -#define VERSATILE_UART2_BASE 0x101F3000 /* Uart 2 */ -#define VERSATILE_SSP_BASE 0x101F4000 /* Synchronous Serial Port */ - -#define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */ -#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ -#define VERSATILE_MBX_BASE 0x40000000 /* MBX */ - -/* PCI space */ -#define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */ -#define VERSATILE_PCI_CFG_BASE 0x42000000 -#define VERSATILE_PCI_MEM_BASE0 0x44000000 -#define VERSATILE_PCI_MEM_BASE1 0x50000000 -#define VERSATILE_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define VERSATILE_PCI_BASE_SIZE 0x01000000 -#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000 -#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * Disk on Chip - */ -#define VERSATILE_DOC_BASE 0x2C000000 -#define VERSATILE_DOC_SIZE (16 << 20) -#define VERSATILE_DOC_PAGE_SIZE 512 -#define VERSATILE_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define VERSATILE_SYS_LED0 (1 << 0) -#define VERSATILE_SYS_LED1 (1 << 1) -#define VERSATILE_SYS_LED2 (1 << 2) -#define VERSATILE_SYS_LED3 (1 << 3) -#define VERSATILE_SYS_LED4 (1 << 4) -#define VERSATILE_SYS_LED5 (1 << 5) -#define VERSATILE_SYS_LED6 (1 << 6) -#define VERSATILE_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK VERSATILE_SYS_LED - -/* - * Control registers - */ -#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */ -#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */ -#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */ - - -/* ------------------------------------------------------------------------ - * Versatile Interrupt Controller - control registers - * ------------------------------------------------------------------------ - * - * Offsets from interrupt controller base - * - * System Controller interrupt controller base is - * - * VERSATILE_IC_BASE - * - * Core Module interrupt controller base is - * - * VERSATILE_SYS_IC - * - */ -/* VIC definitions in include/asm-arm/hardware/vic.h */ - -#define SIC_IRQ_STATUS 0 -#define SIC_IRQ_RAW_STATUS 0x04 -#define SIC_IRQ_ENABLE 0x08 -#define SIC_IRQ_ENABLE_SET 0x08 -#define SIC_IRQ_ENABLE_CLEAR 0x0C -#define SIC_INT_SOFT_SET 0x10 -#define SIC_INT_SOFT_CLEAR 0x14 -#define SIC_INT_PIC_ENABLE 0x20 /* read status of pass through mask */ -#define SIC_INT_PIC_ENABLES 0x20 /* set interrupt pass through bits */ -#define SIC_INT_PIC_ENABLEC 0x24 /* Clear interrupt pass through bits */ - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (primary) - * ------------------------------------------------------------------------ - */ - -#define INT_WDOGINT 0 /* Watchdog timer */ -#define INT_SOFTINT 1 /* Software interrupt */ -#define INT_COMMRx 2 /* Debug Comm Rx interrupt */ -#define INT_COMMTx 3 /* Debug Comm Tx interrupt */ -#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */ -#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */ -#define INT_GPIOINT0 6 /* GPIO 0 */ -#define INT_GPIOINT1 7 /* GPIO 1 */ -#define INT_GPIOINT2 8 /* GPIO 2 */ -#define INT_GPIOINT3 9 /* GPIO 3 */ -#define INT_RTCINT 10 /* Real Time Clock */ -#define INT_SSPINT 11 /* Synchronous Serial Port */ -#define INT_UARTINT0 12 /* UART 0 on development chip */ -#define INT_UARTINT1 13 /* UART 1 on development chip */ -#define INT_UARTINT2 14 /* UART 2 on development chip */ -#define INT_SCIINT 15 /* Smart Card Interface */ -#define INT_CLCDINT 16 /* CLCD controller */ -#define INT_DMAINT 17 /* DMA controller */ -#define INT_PWRFAILINT 18 /* Power failure */ -#define INT_MBXINT 19 /* Graphics processor */ -#define INT_GNDINT 20 /* Reserved */ - /* External interrupt signals from logic tiles or secondary controller */ -#define INT_VICSOURCE21 21 /* Disk on Chip */ -#define INT_VICSOURCE22 22 /* MCI0A */ -#define INT_VICSOURCE23 23 /* MCI1A */ -#define INT_VICSOURCE24 24 /* AACI */ -#define INT_VICSOURCE25 25 /* Ethernet */ -#define INT_VICSOURCE26 26 /* USB */ -#define INT_VICSOURCE27 27 /* PCI 0 */ -#define INT_VICSOURCE28 28 /* PCI 1 */ -#define INT_VICSOURCE29 29 /* PCI 2 */ -#define INT_VICSOURCE30 30 /* PCI 3 */ -#define INT_VICSOURCE31 31 /* SIC source */ - -/* - * Interrupt bit positions - * - */ -#define INTMASK_WDOGINT (1 << INT_WDOGINT) -#define INTMASK_SOFTINT (1 << INT_SOFTINT) -#define INTMASK_COMMRx (1 << INT_COMMRx) -#define INTMASK_COMMTx (1 << INT_COMMTx) -#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1) -#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3) -#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0) -#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1) -#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2) -#define INTMASK_GPIOINT3 (1 << INT_GPIOINT3) -#define INTMASK_RTCINT (1 << INT_RTCINT) -#define INTMASK_SSPINT (1 << INT_SSPINT) -#define INTMASK_UARTINT0 (1 << INT_UARTINT0) -#define INTMASK_UARTINT1 (1 << INT_UARTINT1) -#define INTMASK_UARTINT2 (1 << INT_UARTINT2) -#define INTMASK_SCIINT (1 << INT_SCIINT) -#define INTMASK_CLCDINT (1 << INT_CLCDINT) -#define INTMASK_DMAINT (1 << INT_DMAINT) -#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT) -#define INTMASK_MBXINT (1 << INT_MBXINT) -#define INTMASK_GNDINT (1 << INT_GNDINT) -#define INTMASK_VICSOURCE21 (1 << INT_VICSOURCE21) -#define INTMASK_VICSOURCE22 (1 << INT_VICSOURCE22) -#define INTMASK_VICSOURCE23 (1 << INT_VICSOURCE23) -#define INTMASK_VICSOURCE24 (1 << INT_VICSOURCE24) -#define INTMASK_VICSOURCE25 (1 << INT_VICSOURCE25) -#define INTMASK_VICSOURCE26 (1 << INT_VICSOURCE26) -#define INTMASK_VICSOURCE27 (1 << INT_VICSOURCE27) -#define INTMASK_VICSOURCE28 (1 << INT_VICSOURCE28) -#define INTMASK_VICSOURCE29 (1 << INT_VICSOURCE29) -#define INTMASK_VICSOURCE30 (1 << INT_VICSOURCE30) -#define INTMASK_VICSOURCE31 (1 << INT_VICSOURCE31) - - -#define VERSATILE_SC_VALID_INT 0x003FFFFF - -#define MAXIRQNUM 31 -#define MAXFIQNUM 31 -#define MAXSWINUM 31 - -/* ------------------------------------------------------------------------ - * Interrupts - bit assignment (secondary) - * ------------------------------------------------------------------------ - */ -#define SIC_INT_MMCI0B 1 /* Multimedia Card 0B */ -#define SIC_INT_MMCI1B 2 /* Multimedia Card 1B */ -#define SIC_INT_KMI0 3 /* Keyboard/Mouse port 0 */ -#define SIC_INT_KMI1 4 /* Keyboard/Mouse port 1 */ -#define SIC_INT_SCI3 5 /* Smart Card interface */ -#define SIC_INT_UART3 6 /* UART 3 empty or data available */ -#define SIC_INT_CLCD 7 /* Character LCD */ -#define SIC_INT_TOUCH 8 /* Touchscreen */ -#define SIC_INT_KEYPAD 9 /* Key pressed on display keypad */ - /* 10:20 - reserved */ -#define SIC_INT_DoC 21 /* Disk on Chip memory controller */ -#define SIC_INT_MMCI0A 22 /* MMC 0A */ -#define SIC_INT_MMCI1A 23 /* MMC 1A */ -#define SIC_INT_AACI 24 /* Audio Codec */ -#define SIC_INT_ETH 25 /* Ethernet controller */ -#define SIC_INT_USB 26 /* USB controller */ -#define SIC_INT_PCI0 27 -#define SIC_INT_PCI1 28 -#define SIC_INT_PCI2 29 -#define SIC_INT_PCI3 30 - - -#define SIC_INTMASK_MMCI0B (1 << SIC_INT_MMCI0B) -#define SIC_INTMASK_MMCI1B (1 << SIC_INT_MMCI1B) -#define SIC_INTMASK_KMI0 (1 << SIC_INT_KMI0) -#define SIC_INTMASK_KMI1 (1 << SIC_INT_KMI1) -#define SIC_INTMASK_SCI3 (1 << SIC_INT_SCI3) -#define SIC_INTMASK_UART3 (1 << SIC_INT_UART3) -#define SIC_INTMASK_CLCD (1 << SIC_INT_CLCD) -#define SIC_INTMASK_TOUCH (1 << SIC_INT_TOUCH) -#define SIC_INTMASK_KEYPAD (1 << SIC_INT_KEYPAD) -#define SIC_INTMASK_DoC (1 << SIC_INT_DoC) -#define SIC_INTMASK_MMCI0A (1 << SIC_INT_MMCI0A) -#define SIC_INTMASK_MMCI1A (1 << SIC_INT_MMCI1A) -#define SIC_INTMASK_AACI (1 << SIC_INT_AACI) -#define SIC_INTMASK_ETH (1 << SIC_INT_ETH) -#define SIC_INTMASK_USB (1 << SIC_INT_USB) -#define SIC_INTMASK_PCI0 (1 << SIC_INT_PCI0) -#define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1) -#define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2) -#define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3) -/* - * Application Flash - * - */ -#define FLASH_BASE VERSATILE_FLASH_BASE -#define FLASH_SIZE VERSATILE_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE VERSATILE_BOOT_ROM_HI -#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - -/* - * Clean base - dummy - * - */ -#define CLEAN_BASE EPROM_BASE - -/* - * System controller bit assignment - */ -#define VERSATILE_REFCLK 0 -#define VERSATILE_TIMCLK 1 - -#define VERSATILE_TIMER1_EnSel 15 -#define VERSATILE_TIMER2_EnSel 17 -#define VERSATILE_TIMER3_EnSel 19 -#define VERSATILE_TIMER4_EnSel 21 - - -#define MAX_TIMER 2 -#define MAX_PERIOD 699050 -#define TICKS_PER_uSEC 1 - -/* - * These are useconds NOT ticks. - * - */ -#define mSEC_1 1000 -#define mSEC_5 (mSEC_1 * 5) -#define mSEC_10 (mSEC_1 * 10) -#define mSEC_25 (mSEC_1 * 25) -#define SEC_1 (mSEC_1 * 1000) - -#define VERSATILE_CSR_BASE 0x10000000 -#define VERSATILE_CSR_SIZE 0x10000000 - -#ifdef CONFIG_MACH_VERSATILE_AB -/* - * IB2 Versatile/AB expansion board definitions - */ -#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE -#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) - -/* VICINTSOURCE27 */ -#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) -#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) -#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) - -#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) -#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) -#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) -#endif - -#endif - -/* END */ diff --git a/include/asm-arm/arch-versatile/system.h b/include/asm-arm/arch-versatile/system.h deleted file mode 100644 index 3ea4e07b58c8..000000000000 --- a/include/asm-arm/arch-versatile/system.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/system.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include -#include -#include - -static inline void arch_idle(void) -{ - /* - * This should do all the clock switching - * and wait for interrupt tricks - */ - cpu_do_idle(); -} - -static inline void arch_reset(char mode) -{ - u32 val; - - val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7; - val |= 0x105; - - __raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK)); - __raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL)); - __raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK)); -} - -#endif diff --git a/include/asm-arm/arch-versatile/timex.h b/include/asm-arm/arch-versatile/timex.h deleted file mode 100644 index 38fd04fc9141..000000000000 --- a/include/asm-arm/arch-versatile/timex.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/timex.h - * - * Versatile architecture timex specifications - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h deleted file mode 100644 index 7215133d0514..000000000000 --- a/include/asm-arm/arch-versatile/uncompress.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/uncompress.h - * - * Copyright (C) 2003 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define AMBA_UART_DR (*(volatile unsigned char *)0x101F1000) -#define AMBA_UART_LCRH (*(volatile unsigned char *)0x101F102C) -#define AMBA_UART_CR (*(volatile unsigned char *)0x101F1030) -#define AMBA_UART_FR (*(volatile unsigned char *)0x101F1018) - -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = c; -} - -static inline void flush(void) -{ - while (AMBA_UART_FR & (1 << 3)) - barrier(); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-versatile/vmalloc.h b/include/asm-arm/arch-versatile/vmalloc.h deleted file mode 100644 index ac780df62156..000000000000 --- a/include/asm-arm/arch-versatile/vmalloc.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * linux/include/asm-arm/arch-versatile/vmalloc.h - * - * Copyright (C) 2003 ARM Limited - * Copyright (C) 2000 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h index d08a1f2863e4..5106acaa1d0e 100644 --- a/include/asm-arm/plat-s3c/iic.h +++ b/include/asm-arm/plat-s3c/iic.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/iic.h +/* arch/arm/mach-s3c2410/include/mach/iic.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h index ad6bbe90616e..f4dcd14af059 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/include/asm-arm/plat-s3c/nand.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/nand.h +/* arch/arm/mach-s3c2410/include/mach/nand.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h index b004dee6bcaf..c3878f7acb83 100644 --- a/include/asm-arm/plat-s3c/regs-ac97.h +++ b/include/asm-arm/plat-s3c/regs-ac97.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h +/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h * * Copyright (c) 2006 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-adc.h b/include/asm-arm/plat-s3c/regs-adc.h index c7f231963e76..4323cccc86cd 100644 --- a/include/asm-arm/plat-s3c/regs-adc.h +++ b/include/asm-arm/plat-s3c/regs-adc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-adc.h +/* arch/arm/mach-s3c2410/include/mach/regs-adc.h * * Copyright (c) 2004 Shannon Holland * diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h index 2ae29522f253..2f7c17de8ac8 100644 --- a/include/asm-arm/plat-s3c/regs-iic.h +++ b/include/asm-arm/plat-s3c/regs-iic.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iic.h +/* arch/arm/mach-s3c2410/include/mach/regs-iic.h * * Copyright (c) 2004 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h index d742205ac172..09f0b5503f5b 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/include/asm-arm/plat-s3c/regs-nand.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-nand.h +/* arch/arm/mach-s3c2410/include/mach/regs-nand.h * * Copyright (c) 2004,2005 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h index 93b03c49710a..d5837cf8e402 100644 --- a/include/asm-arm/plat-s3c/regs-rtc.h +++ b/include/asm-arm/plat-s3c/regs-rtc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-rtc.h +/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h index 923e114db663..a0daa647b92c 100644 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ b/include/asm-arm/plat-s3c/regs-serial.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-serial.h +/* arch/arm/mach-s3c2410/include/mach/regs-serial.h * * From linux/include/asm-arm/hardware/serial_s3c2410.h * diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index b5bc692f3489..b4366ea39677 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-timer.h +/* arch/arm/mach-s3c2410/include/mach/regs-timer.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index 56c4193b7a46..1229f076c0a0 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-watchdog.h +/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c24xx/regs-iis.h b/include/asm-arm/plat-s3c24xx/regs-iis.h index eaf77916a602..a6f1d5df13b4 100644 --- a/include/asm-arm/plat-s3c24xx/regs-iis.h +++ b/include/asm-arm/plat-s3c24xx/regs-iis.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-iis.h +/* arch/arm/mach-s3c2410/include/mach/regs-iis.h * * Copyright (c) 2003 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h index ea565b007d04..2b35479ee35c 100644 --- a/include/asm-arm/plat-s3c24xx/regs-spi.h +++ b/include/asm-arm/plat-s3c24xx/regs-spi.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-spi.h +/* arch/arm/mach-s3c2410/include/mach/regs-spi.h * * Copyright (c) 2004 Fetron GmbH * diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h index e1e9805d2d9a..f0dd4a41b37b 100644 --- a/include/asm-arm/plat-s3c24xx/regs-udc.h +++ b/include/asm-arm/plat-s3c24xx/regs-udc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/regs-udc.h +/* arch/arm/mach-s3c2410/include/mach/regs-udc.h * * Copyright (C) 2004 Herbert Poetzl * diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h index b8aa6cb69b58..546bb4008f49 100644 --- a/include/asm-arm/plat-s3c24xx/udc.h +++ b/include/asm-arm/plat-s3c24xx/udc.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/arch-s3c2410/udc.h +/* arch/arm/mach-s3c2410/include/mach/udc.h * * Copyright (c) 2005 Arnaud Patard * -- cgit v1.2.3-59-g8ed1b