From ae49e807951d5e26767bc55d1dc29671c596c450 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 13 May 2009 22:56:34 +0000 Subject: asm-generic: add legacy I/O header files The dma.h, hw_irq.h, serial.h and timex.h files originally described PC-style i8237, i8259A, i8250, i8253 and i8255 chips as well as the VGA style text mode graphics. Modern architectures live happily without these specific interfaces, but a few definitions from these headers keep getting used in common code. The new generic headers are what most architectures use anyway nowadays, just implementing the minimal definitions. Signed-off-by: Remis Lima Baima Signed-off-by: Arnd Bergmann --- include/asm-generic/dma.h | 15 +++++++++++++++ include/asm-generic/hw_irq.h | 9 +++++++++ include/asm-generic/parport.h | 23 +++++++++++++++++++++++ include/asm-generic/serial.h | 13 +++++++++++++ include/asm-generic/timex.h | 22 ++++++++++++++++++++++ include/asm-generic/vga.h | 24 ++++++++++++++++++++++++ 6 files changed, 106 insertions(+) create mode 100644 include/asm-generic/dma.h create mode 100644 include/asm-generic/hw_irq.h create mode 100644 include/asm-generic/parport.h create mode 100644 include/asm-generic/serial.h create mode 100644 include/asm-generic/timex.h create mode 100644 include/asm-generic/vga.h (limited to 'include/asm-generic') diff --git a/include/asm-generic/dma.h b/include/asm-generic/dma.h new file mode 100644 index 000000000000..9dfc3a7f36d2 --- /dev/null +++ b/include/asm-generic/dma.h @@ -0,0 +1,15 @@ +#ifndef __ASM_GENERIC_DMA_H +#define __ASM_GENERIC_DMA_H +/* + * This file traditionally describes the i8237 PC style DMA controller. + * Most architectures don't have these any more and can get the minimal + * implementation from kernel/dma.c by not defining MAX_DMA_CHANNELS. + * + * Some code relies on seeing MAX_DMA_ADDRESS though. + */ +#define MAX_DMA_ADDRESS PAGE_OFFSET + +extern int request_dma(unsigned int dmanr, const char *device_id); +extern void free_dma(unsigned int dmanr); + +#endif /* __ASM_GENERIC_DMA_H */ diff --git a/include/asm-generic/hw_irq.h b/include/asm-generic/hw_irq.h new file mode 100644 index 000000000000..89036d7b40e0 --- /dev/null +++ b/include/asm-generic/hw_irq.h @@ -0,0 +1,9 @@ +#ifndef __ASM_GENERIC_HW_IRQ_H +#define __ASM_GENERIC_HW_IRQ_H +/* + * hw_irq.h has internal declarations for the low-level interrupt + * controller, like the original i8259A. + * In general, this is not needed for new architectures. + */ + +#endif /* __ASM_GENERIC_HW_IRQ_H */ diff --git a/include/asm-generic/parport.h b/include/asm-generic/parport.h new file mode 100644 index 000000000000..40528cb977e8 --- /dev/null +++ b/include/asm-generic/parport.h @@ -0,0 +1,23 @@ +#ifndef __ASM_GENERIC_PARPORT_H +#define __ASM_GENERIC_PARPORT_H + +/* + * An ISA bus may have i8255 parallel ports at well-known + * locations in the I/O space, which are scanned by + * parport_pc_find_isa_ports. + * + * Without ISA support, the driver will only attach + * to devices on the PCI bus. + */ + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ +#ifdef CONFIG_ISA + return parport_pc_find_isa_ports(autoirq, autodma); +#else + return 0; +#endif +} + +#endif /* __ASM_GENERIC_PARPORT_H */ diff --git a/include/asm-generic/serial.h b/include/asm-generic/serial.h new file mode 100644 index 000000000000..5e291090fe04 --- /dev/null +++ b/include/asm-generic/serial.h @@ -0,0 +1,13 @@ +#ifndef __ASM_GENERIC_SERIAL_H +#define __ASM_GENERIC_SERIAL_H + +/* + * This should not be an architecture specific #define, oh well. + * + * Traditionally, it just describes i8250 and related serial ports + * that have this clock rate. + */ + +#define BASE_BAUD (1843200 / 16) + +#endif /* __ASM_GENERIC_SERIAL_H */ diff --git a/include/asm-generic/timex.h b/include/asm-generic/timex.h new file mode 100644 index 000000000000..b2243cb8d6f6 --- /dev/null +++ b/include/asm-generic/timex.h @@ -0,0 +1,22 @@ +#ifndef __ASM_GENERIC_TIMEX_H +#define __ASM_GENERIC_TIMEX_H + +/* + * If you have a cycle counter, return the value here. + */ +typedef unsigned long cycles_t; +#ifndef get_cycles +static inline cycles_t get_cycles(void) +{ + return 0; +} +#endif + +/* + * Architectures are encouraged to implement read_current_timer + * and define this in order to avoid the expensive delay loop + * calibration during boot. + */ +#undef ARCH_HAS_READ_CURRENT_TIMER + +#endif /* __ASM_GENERIC_TIMEX_H */ diff --git a/include/asm-generic/vga.h b/include/asm-generic/vga.h new file mode 100644 index 000000000000..36c8ff52016b --- /dev/null +++ b/include/asm-generic/vga.h @@ -0,0 +1,24 @@ +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares + */ +#ifndef __ASM_GENERIC_VGA_H +#define __ASM_GENERIC_VGA_H + +/* + * On most architectures that support VGA, we can just + * recalculate addresses and then access the videoram + * directly without any black magic. + * + * Everyone else needs to ioremap the address and use + * proper I/O accesses. + */ +#ifndef VGA_MAP_MEM +#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x) +#endif + +#define vga_readb(x) (*(x)) +#define vga_writeb(x, y) (*(y) = (x)) + +#endif /* _ASM_GENERIC_VGA_H */ -- cgit v1.2.3-59-g8ed1b