From 32231a66b4e1b649c346dc76b7d191f7e64a663a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 21 Jul 2007 19:18:57 -0700 Subject: [SPARC32]: clean include/asm-sparc/irq.h Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h and into individual files in there (e.g. macros internal to sun4m_irq.c, etc.) Signed-off-by: Al Viro Signed-off-by: David S. Miller --- include/asm-sparc/irq.h | 136 ------------------------------------------------ 1 file changed, 136 deletions(-) (limited to 'include/asm-sparc') diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h index ff520ea97473..45827934f7bc 100644 --- a/include/asm-sparc/irq.h +++ b/include/asm-sparc/irq.h @@ -14,9 +14,6 @@ #include /* For SUN4M_NCPUS */ #include -#define __irq_ino(irq) irq -#define __irq_pil(irq) irq - #define NR_IRQS 16 #define irq_canonicalize(irq) (irq) @@ -30,11 +27,6 @@ */ BTFIXUPDEF_CALL(void, disable_irq, unsigned int) BTFIXUPDEF_CALL(void, enable_irq, unsigned int) -BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int) -BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int) -BTFIXUPDEF_CALL(void, clear_clock_irq, void) -BTFIXUPDEF_CALL(void, clear_profile_irq, int) -BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int) static inline void disable_irq_nosync(unsigned int irq) { @@ -51,134 +43,6 @@ static inline void enable_irq(unsigned int irq) BTFIXUP_CALL(enable_irq)(irq); } -static inline void disable_pil_irq(unsigned int irq) -{ - BTFIXUP_CALL(disable_pil_irq)(irq); -} - -static inline void enable_pil_irq(unsigned int irq) -{ - BTFIXUP_CALL(enable_pil_irq)(irq); -} - -static inline void clear_clock_irq(void) -{ - BTFIXUP_CALL(clear_clock_irq)(); -} - -static inline void clear_profile_irq(int irq) -{ - BTFIXUP_CALL(clear_profile_irq)(irq); -} - -static inline void load_profile_irq(int cpu, int limit) -{ - BTFIXUP_CALL(load_profile_irq)(cpu, limit); -} - -extern void (*sparc_init_timers)(irq_handler_t lvl10_irq); -extern void claim_ticker14(irq_handler_t irq_handler, - int irq, - unsigned int timeout); - -#ifdef CONFIG_SMP -BTFIXUPDEF_CALL(void, set_cpu_int, int, int) -BTFIXUPDEF_CALL(void, clear_cpu_int, int, int) -BTFIXUPDEF_CALL(void, set_irq_udt, int) - -#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level) -#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level) -#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu) -#endif - extern int request_fast_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, __const__ char *devname); -/* On the sun4m, just like the timers, we have both per-cpu and master - * interrupt registers. - */ - -/* These registers are used for sending/receiving irqs from/to - * different cpu's. - */ -struct sun4m_intreg_percpu { - unsigned int tbt; /* Interrupts still pending for this cpu. */ - - /* These next two registers are WRITE-ONLY and are only - * "on bit" sensitive, "off bits" written have NO affect. - */ - unsigned int clear; /* Clear this cpus irqs here. */ - unsigned int set; /* Set this cpus irqs here. */ - unsigned char space[PAGE_SIZE - 12]; -}; - -/* - * djhr - * Actually the clear and set fields in this struct are misleading.. - * according to the SLAVIO manual (and the same applies for the SEC) - * the clear field clears bits in the mask which will ENABLE that IRQ - * the set field sets bits in the mask to DISABLE the IRQ. - * - * Also the undirected_xx address in the SLAVIO is defined as - * RESERVED and write only.. - * - * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor - * sun4m machines, for MP the layout makes more sense. - */ -struct sun4m_intregs { - struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; - unsigned int tbt; /* IRQ's that are still pending. */ - unsigned int irqs; /* Master IRQ bits. */ - - /* Again, like the above, two these registers are WRITE-ONLY. */ - unsigned int clear; /* Clear master IRQ's by setting bits here. */ - unsigned int set; /* Set master IRQ's by setting bits here. */ - - /* This register is both READ and WRITE. */ - unsigned int undirected_target; /* Which cpu gets undirected irqs. */ -}; - -extern struct sun4m_intregs *sun4m_interrupts; - -/* - * Bit field defines for the interrupt registers on various - * Sparc machines. - */ - -/* The sun4c interrupt register. */ -#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */ -#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */ -#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */ -#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */ -#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */ -#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */ -#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */ - -/* Dave Redman (djhr@tadpole.co.uk) - * The sun4m interrupt registers. - */ -#define SUN4M_INT_ENABLE 0x80000000 -#define SUN4M_INT_E14 0x00000080 -#define SUN4M_INT_E10 0x00080000 - -#define SUN4M_HARD_INT(x) (0x000000001 << (x)) -#define SUN4M_SOFT_INT(x) (0x000010000 << (x)) - -#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ -#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ -#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ -#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ -#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ -#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ -#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ -#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ -#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ -#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ -#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ -#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ -#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ -#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ - -#define SUN4M_INT_SBUS(x) (1 << (x+7)) -#define SUN4M_INT_VME(x) (1 << (x)) - #endif -- cgit v1.2.3-59-g8ed1b