From ad9dc91b6e21266bfc6f466db4b95e10211f31ee Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Tue, 16 Sep 2014 19:18:12 -0400 Subject: drm/i915: Fix Sink CRC In some cases like when PSR just got enabled the panel need more vblank times to calculate CRC. I figured that out with the new PSR test cases facing some cases that I had a green screen but a blank CRC. Even with 2 vblank waits on kernel + 2 vblank waits on test case. So let's give up to 6 vblank wait time. However we now check for TEST_CRC_COUNT that shows when panel finished to calculate CRC and has it ready. v2: Jani pointed out attempts decrements was wrong and should never reach the error condition. And Daniel pointed out that EIO is more appropriated than EGAIN. Also I realized that I have to read test_crc_count after setting test_sink v3: Rebase and adding error message Cc: Todd Previte Cc: Daniel Vetter Cc: Jani Nikula Signed-off-by: Rodrigo Vivi Reviewed-by: Todd Previte Signed-off-by: Daniel Vetter --- include/drm/drm_dp_helper.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/drm/drm_dp_helper.h') diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 9305c718d789..8edeed00c082 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -303,7 +303,8 @@ #define DP_TEST_CRC_B_CB 0x244 #define DP_TEST_SINK_MISC 0x246 -#define DP_TEST_CRC_SUPPORTED (1 << 5) +# define DP_TEST_CRC_SUPPORTED (1 << 5) +# define DP_TEST_COUNT_MASK 0x7 #define DP_TEST_RESPONSE 0x260 # define DP_TEST_ACK (1 << 0) @@ -313,7 +314,7 @@ #define DP_TEST_EDID_CHECKSUM 0x261 #define DP_TEST_SINK 0x270 -#define DP_TEST_SINK_START (1 << 0) +# define DP_TEST_SINK_START (1 << 0) #define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */ # define DP_PAYLOAD_TABLE_UPDATED (1 << 0) -- cgit v1.2.3-59-g8ed1b From e45708976aea3a3c3aa959e3cc2b703fefbd758a Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 22 Oct 2014 11:16:36 +0200 Subject: drm/dp-helper: Move the legacy helpers to gma500 Except for gma500 all drivers are converted to the new style helpers, which have much better abstraction of the underlying hw protocols and already much more helper functions (including the entire mst library) on top of them. Since no one seems to work on converting gma500 let's just move the code away so that new drivers don't end up accidentally using this. Cc: Patrik Jakobsson Reviewed-by: Patrik Jakobsson Reviewed-by: Alan Cox [danvet: Add __deprecated as requested by Alan. Also add a short FIXME comment and drop the EXPORT_SYMBOL which is no longer needed.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_dp_helper.c | 192 --------------------------------- drivers/gpu/drm/gma500/cdv_intel_dp.c | 195 ++++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 20 ---- 3 files changed, 195 insertions(+), 212 deletions(-) (limited to 'include/drm/drm_dp_helper.h') diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 08e33b8b13a4..c088bad7e72f 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -39,198 +39,6 @@ * blocks, ... */ -/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ -static int -i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, - uint8_t write_byte, uint8_t *read_byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int ret; - - ret = (*algo_data->aux_ch)(adapter, mode, - write_byte, read_byte); - return ret; -} - -/* - * I2C over AUX CH - */ - -/* - * Send the address. If the I2C link is running, this 'restarts' - * the connection with the new address, this is used for doing - * a write followed by a read (as needed for DDC) - */ -static int -i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int mode = MODE_I2C_START; - int ret; - - if (reading) - mode |= MODE_I2C_READ; - else - mode |= MODE_I2C_WRITE; - algo_data->address = address; - algo_data->running = true; - ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); - return ret; -} - -/* - * Stop the I2C transaction. This closes out the link, sending - * a bare address packet with the MOT bit turned off - */ -static void -i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int mode = MODE_I2C_STOP; - - if (reading) - mode |= MODE_I2C_READ; - else - mode |= MODE_I2C_WRITE; - if (algo_data->running) { - (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); - algo_data->running = false; - } -} - -/* - * Write a single byte to the current I2C address, the - * the I2C link must be running or this returns -EIO - */ -static int -i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int ret; - - if (!algo_data->running) - return -EIO; - - ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); - return ret; -} - -/* - * Read a single byte from the current I2C address, the - * I2C link must be running or this returns -EIO - */ -static int -i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) -{ - struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; - int ret; - - if (!algo_data->running) - return -EIO; - - ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); - return ret; -} - -static int -i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, - struct i2c_msg *msgs, - int num) -{ - int ret = 0; - bool reading = false; - int m; - int b; - - for (m = 0; m < num; m++) { - u16 len = msgs[m].len; - u8 *buf = msgs[m].buf; - reading = (msgs[m].flags & I2C_M_RD) != 0; - ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); - if (ret < 0) - break; - if (reading) { - for (b = 0; b < len; b++) { - ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); - if (ret < 0) - break; - } - } else { - for (b = 0; b < len; b++) { - ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); - if (ret < 0) - break; - } - } - if (ret < 0) - break; - } - if (ret >= 0) - ret = num; - i2c_algo_dp_aux_stop(adapter, reading); - DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret); - return ret; -} - -static u32 -i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) -{ - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | - I2C_FUNC_SMBUS_READ_BLOCK_DATA | - I2C_FUNC_SMBUS_BLOCK_PROC_CALL | - I2C_FUNC_10BIT_ADDR; -} - -static const struct i2c_algorithm i2c_dp_aux_algo = { - .master_xfer = i2c_algo_dp_aux_xfer, - .functionality = i2c_algo_dp_aux_functionality, -}; - -static void -i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) -{ - (void) i2c_algo_dp_aux_address(adapter, 0, false); - (void) i2c_algo_dp_aux_stop(adapter, false); -} - -static int -i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) -{ - adapter->algo = &i2c_dp_aux_algo; - adapter->retries = 3; - i2c_dp_aux_reset_bus(adapter); - return 0; -} - -/** - * i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper - * @adapter: i2c adapter to register - * - * This registers an i2c adapter that uses dp aux channel as it's underlaying - * transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure - * and store it in the algo_data member of the @adapter argument. This will be - * used by the i2c over dp aux algorithm to drive the hardware. - * - * RETURNS: - * 0 on success, -ERRNO on failure. - * - * IMPORTANT: - * This interface is deprecated, please switch to the new dp aux helpers and - * drm_dp_aux_register(). - */ -int -i2c_dp_aux_add_bus(struct i2c_adapter *adapter) -{ - int error; - - error = i2c_dp_aux_prepare_bus(adapter); - if (error) - return error; - error = i2c_add_adapter(adapter); - return error; -} -EXPORT_SYMBOL(i2c_dp_aux_add_bus); - /* Helpers for DP link training */ static u8 dp_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r) { diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c index 9f158eab517a..0fafb8e2483a 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c @@ -37,6 +37,201 @@ #include "gma_display.h" #include +/** + * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp + * aux algorithm + * @running: set by the algo indicating whether an i2c is ongoing or whether + * the i2c bus is quiescent + * @address: i2c target address for the currently ongoing transfer + * @aux_ch: driver callback to transfer a single byte of the i2c payload + */ +struct i2c_algo_dp_aux_data { + bool running; + u16 address; + int (*aux_ch) (struct i2c_adapter *adapter, + int mode, uint8_t write_byte, + uint8_t *read_byte); +}; + +/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */ +static int +i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + ret = (*algo_data->aux_ch)(adapter, mode, + write_byte, read_byte); + return ret; +} + +/* + * I2C over AUX CH + */ + +/* + * Send the address. If the I2C link is running, this 'restarts' + * the connection with the new address, this is used for doing + * a write followed by a read (as needed for DDC) + */ +static int +i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_START; + int ret; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + algo_data->address = address; + algo_data->running = true; + ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + return ret; +} + +/* + * Stop the I2C transaction. This closes out the link, sending + * a bare address packet with the MOT bit turned off + */ +static void +i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int mode = MODE_I2C_STOP; + + if (reading) + mode |= MODE_I2C_READ; + else + mode |= MODE_I2C_WRITE; + if (algo_data->running) { + (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL); + algo_data->running = false; + } +} + +/* + * Write a single byte to the current I2C address, the + * the I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL); + return ret; +} + +/* + * Read a single byte from the current I2C address, the + * I2C link must be running or this returns -EIO + */ +static int +i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + int ret; + + if (!algo_data->running) + return -EIO; + + ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret); + return ret; +} + +static int +i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter, + struct i2c_msg *msgs, + int num) +{ + int ret = 0; + bool reading = false; + int m; + int b; + + for (m = 0; m < num; m++) { + u16 len = msgs[m].len; + u8 *buf = msgs[m].buf; + reading = (msgs[m].flags & I2C_M_RD) != 0; + ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading); + if (ret < 0) + break; + if (reading) { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]); + if (ret < 0) + break; + } + } else { + for (b = 0; b < len; b++) { + ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]); + if (ret < 0) + break; + } + } + if (ret < 0) + break; + } + if (ret >= 0) + ret = num; + i2c_algo_dp_aux_stop(adapter, reading); + DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret); + return ret; +} + +static u32 +i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | + I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm i2c_dp_aux_algo = { + .master_xfer = i2c_algo_dp_aux_xfer, + .functionality = i2c_algo_dp_aux_functionality, +}; + +static void +i2c_dp_aux_reset_bus(struct i2c_adapter *adapter) +{ + (void) i2c_algo_dp_aux_address(adapter, 0, false); + (void) i2c_algo_dp_aux_stop(adapter, false); +} + +static int +i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter) +{ + adapter->algo = &i2c_dp_aux_algo; + adapter->retries = 3; + i2c_dp_aux_reset_bus(adapter); + return 0; +} + +/* + * FIXME: This is the old dp aux helper, gma500 is the last driver that needs to + * be ported over to the new helper code in drm_dp_helper.c like i915 or radeon. + */ +static int __deprecated +i2c_dp_aux_add_bus(struct i2c_adapter *adapter) +{ + int error; + + error = i2c_dp_aux_prepare_bus(adapter); + if (error) + return error; + error = i2c_add_adapter(adapter); + return error; +} + #define _wait_for(COND, MS, W) ({ \ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ int ret__ = 0; \ diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 9305c718d789..afebb08eee3a 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -404,26 +404,6 @@ #define MODE_I2C_READ 4 #define MODE_I2C_STOP 8 -/** - * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp - * aux algorithm - * @running: set by the algo indicating whether an i2c is ongoing or whether - * the i2c bus is quiescent - * @address: i2c target address for the currently ongoing transfer - * @aux_ch: driver callback to transfer a single byte of the i2c payload - */ -struct i2c_algo_dp_aux_data { - bool running; - u16 address; - int (*aux_ch) (struct i2c_adapter *adapter, - int mode, uint8_t write_byte, - uint8_t *read_byte); -}; - -int -i2c_dp_aux_add_bus(struct i2c_adapter *adapter); - - #define DP_LINK_STATUS_SIZE 6 bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], int lane_count); -- cgit v1.2.3-59-g8ed1b From e9cf6194ab0cdb8f40f1eca7b230751c2289557e Mon Sep 17 00:00:00 2001 From: Todd Previte Date: Tue, 4 Nov 2014 15:17:35 -0700 Subject: drm/dp: Add counters in the drm_dp_aux struct for I2C NACKs and DEFERs These counters are used for Displayort compliance testing to detect error conditions when executing tests 4.2.2.4 and 4.2.2.5 in the Displayport Link CTS specificaiton. They determine whether to use the preferred/requested mode or the failsafe mode during these tests. V2: - Addressed previous review feedback - Updated commit message - Changed from uint8_t to uint32_t Cc: dri-devel@lists.freedesktop.org Signed-off-by: Todd Previte [danvet: s/uint32_t/unsigned/ for clearer intent. Also drop the i915 from the subject, it's all core stuff.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/drm_dp_helper.c | 2 ++ include/drm/drm_dp_helper.h | 1 + 2 files changed, 3 insertions(+) (limited to 'include/drm/drm_dp_helper.h') diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index c088bad7e72f..959e2074b0d4 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -462,10 +462,12 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) case DP_AUX_I2C_REPLY_NACK: DRM_DEBUG_KMS("I2C nack\n"); + aux->i2c_nack_count++; return -EREMOTEIO; case DP_AUX_I2C_REPLY_DEFER: DRM_DEBUG_KMS("I2C defer\n"); + aux->i2c_defer_count++; usleep_range(400, 500); continue; diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index afebb08eee3a..6041ad8c2f2d 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -530,6 +530,7 @@ struct drm_dp_aux { struct mutex hw_mutex; ssize_t (*transfer)(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg); + unsigned i2c_nack_count, i2c_defer_count; }; ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, -- cgit v1.2.3-59-g8ed1b