From 4f71612ee3a1b2d15c8246d926a40c4f7d21cc3b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 10 Jul 2013 14:05:44 +0800 Subject: ARM: imx: fix vf610 enet module clock selection The fec/enet driver calculates MDC rate with the formula below. ref_freq / ((MII_SPEED + 1) x 2) The ref_freq here is the fec internal module clock, which is missing from clk-vf610 clock driver right now. And clk-vf610 driver mistakenly supplies RMII clock (50 MHz) as the source to fec. This results in the situation that fec driver gets ref_freq as 50 MHz, while physically it runs at 66 MHz (fec module clock physically sources from ipg which runs at 66 MHz). That's why software expects MDC runs at 2.5 MHz, while the measurement tells it runs at 3.3 MHz. And this causes the PHY KSZ8041 keeps swithing between Full and Half mode as below. libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half libphy: 400d0000.etherne:00 - Link is Up - 100/Full libphy: 400d0000.etherne:00 - Link is Up - 100/Half Add the missing module clock for ENET0 and ENET1, and correct the clock supplying in device tree to fix above issue. Thanks to Alison Wang for debugging the issue. Signed-off-by: Shawn Guo --- include/dt-bindings/clock/vf610-clock.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/dt-bindings') diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index 15e997fa78f2..4aa2b48cd151 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -158,6 +158,8 @@ #define VF610_CLK_GPU_SEL 145 #define VF610_CLK_GPU_EN 146 #define VF610_CLK_GPU2D 147 -#define VF610_CLK_END 148 +#define VF610_CLK_ENET0 148 +#define VF610_CLK_ENET1 149 +#define VF610_CLK_END 150 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ -- cgit v1.2.3-59-g8ed1b From c5f167d31530b9b1aa7beb469aeca10f869eff5a Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 3 Jul 2013 09:44:50 +0100 Subject: pinctrl: am33xx dt binding: correct include path Using #include is a bit odd. It happens to work because the DTC flags include -Iarch/FOO/boot/dts as well as arch/FOO/boot/dts/include and arch/FOO/boot/dts/include/dt-bindings is a symlink to include/dt-bindings. Signed-off-by: Ian Campbell Cc: Grant Likely Cc: Linus Walleij Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij --- include/dt-bindings/pinctrl/am33xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/dt-bindings') diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h index 469e0325e6f4..2fbc804e1a45 100644 --- a/include/dt-bindings/pinctrl/am33xx.h +++ b/include/dt-bindings/pinctrl/am33xx.h @@ -5,7 +5,7 @@ #ifndef _DT_BINDINGS_PINCTRL_AM33XX_H #define _DT_BINDINGS_PINCTRL_AM33XX_H -#include +#include /* am33xx specific mux bit defines */ #undef PULL_ENA -- cgit v1.2.3-59-g8ed1b