From 35bdd29095ad614c5fb4a934bfd4f57a94dfd395 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Thu, 12 Apr 2012 10:48:44 +0200 Subject: mfd: Add driver for STA2X11 MFD block This also introduces to export a function that is in the base sta2x11 support patches. The header will increase with other prototypes and constants over time. Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Cc: Alan Cox Signed-off-by: Samuel Ortiz --- include/linux/mfd/sta2x11-mfd.h | 324 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 324 insertions(+) create mode 100644 include/linux/mfd/sta2x11-mfd.h (limited to 'include/linux/mfd/sta2x11-mfd.h') diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h new file mode 100644 index 000000000000..d179227e866f --- /dev/null +++ b/include/linux/mfd/sta2x11-mfd.h @@ -0,0 +1,324 @@ +/* + * Copyright (c) 2009-2011 Wind River Systems, Inc. + * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * The STMicroelectronics ConneXt (STA2X11) chip has several unrelated + * functions in one PCI endpoint functions. This driver simply + * registers the platform devices in this iomemregion and exports a few + * functions to access common registers + */ + +#ifndef __STA2X11_MFD_H +#define __STA2X11_MFD_H +#include +#include + +/* + * The MFD PCI block includes the GPIO peripherals and other register blocks. + * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) + */ +#define GSTA_GPIO_PER_BLOCK 32 +#define GSTA_NR_BLOCKS 4 +#define GSTA_NR_GPIO (GSTA_GPIO_PER_BLOCK * GSTA_NR_BLOCKS) + +/* Pinconfig is set by the board definition: altfunc, pull-up, pull-down */ +struct sta2x11_gpio_pdata { + unsigned pinconfig[GSTA_NR_GPIO]; +}; + +/* Macros below lifted from sh_pfc.h, with minor differences */ +#define PINMUX_TYPE_NONE 0 +#define PINMUX_TYPE_FUNCTION 1 +#define PINMUX_TYPE_OUTPUT_LOW 2 +#define PINMUX_TYPE_OUTPUT_HIGH 3 +#define PINMUX_TYPE_INPUT 4 +#define PINMUX_TYPE_INPUT_PULLUP 5 +#define PINMUX_TYPE_INPUT_PULLDOWN 6 + +/* Give names to GPIO pins, like PXA does, taken from the manual */ +#define STA2X11_GPIO0 0 +#define STA2X11_GPIO1 1 +#define STA2X11_GPIO2 2 +#define STA2X11_GPIO3 3 +#define STA2X11_GPIO4 4 +#define STA2X11_GPIO5 5 +#define STA2X11_GPIO6 6 +#define STA2X11_GPIO7 7 +#define STA2X11_GPIO8_RGBOUT_RED7 8 +#define STA2X11_GPIO9_RGBOUT_RED6 9 +#define STA2X11_GPIO10_RGBOUT_RED5 10 +#define STA2X11_GPIO11_RGBOUT_RED4 11 +#define STA2X11_GPIO12_RGBOUT_RED3 12 +#define STA2X11_GPIO13_RGBOUT_RED2 13 +#define STA2X11_GPIO14_RGBOUT_RED1 14 +#define STA2X11_GPIO15_RGBOUT_RED0 15 +#define STA2X11_GPIO16_RGBOUT_GREEN7 16 +#define STA2X11_GPIO17_RGBOUT_GREEN6 17 +#define STA2X11_GPIO18_RGBOUT_GREEN5 18 +#define STA2X11_GPIO19_RGBOUT_GREEN4 19 +#define STA2X11_GPIO20_RGBOUT_GREEN3 20 +#define STA2X11_GPIO21_RGBOUT_GREEN2 21 +#define STA2X11_GPIO22_RGBOUT_GREEN1 22 +#define STA2X11_GPIO23_RGBOUT_GREEN0 23 +#define STA2X11_GPIO24_RGBOUT_BLUE7 24 +#define STA2X11_GPIO25_RGBOUT_BLUE6 25 +#define STA2X11_GPIO26_RGBOUT_BLUE5 26 +#define STA2X11_GPIO27_RGBOUT_BLUE4 27 +#define STA2X11_GPIO28_RGBOUT_BLUE3 28 +#define STA2X11_GPIO29_RGBOUT_BLUE2 29 +#define STA2X11_GPIO30_RGBOUT_BLUE1 30 +#define STA2X11_GPIO31_RGBOUT_BLUE0 31 +#define STA2X11_GPIO32_RGBOUT_VSYNCH 32 +#define STA2X11_GPIO33_RGBOUT_HSYNCH 33 +#define STA2X11_GPIO34_RGBOUT_DEN 34 +#define STA2X11_GPIO35_ETH_CRS_DV 35 +#define STA2X11_GPIO36_ETH_TXD1 36 +#define STA2X11_GPIO37_ETH_TXD0 37 +#define STA2X11_GPIO38_ETH_TX_EN 38 +#define STA2X11_GPIO39_MDIO 39 +#define STA2X11_GPIO40_ETH_REF_CLK 40 +#define STA2X11_GPIO41_ETH_RXD1 41 +#define STA2X11_GPIO42_ETH_RXD0 42 +#define STA2X11_GPIO43_MDC 43 +#define STA2X11_GPIO44_CAN_TX 44 +#define STA2X11_GPIO45_CAN_RX 45 +#define STA2X11_GPIO46_MLB_DAT 46 +#define STA2X11_GPIO47_MLB_SIG 47 +#define STA2X11_GPIO48_SPI0_CLK 48 +#define STA2X11_GPIO49_SPI0_TXD 49 +#define STA2X11_GPIO50_SPI0_RXD 50 +#define STA2X11_GPIO51_SPI0_FRM 51 +#define STA2X11_GPIO52_SPI1_CLK 52 +#define STA2X11_GPIO53_SPI1_TXD 53 +#define STA2X11_GPIO54_SPI1_RXD 54 +#define STA2X11_GPIO55_SPI1_FRM 55 +#define STA2X11_GPIO56_SPI2_CLK 56 +#define STA2X11_GPIO57_SPI2_TXD 57 +#define STA2X11_GPIO58_SPI2_RXD 58 +#define STA2X11_GPIO59_SPI2_FRM 59 +#define STA2X11_GPIO60_I2C0_SCL 60 +#define STA2X11_GPIO61_I2C0_SDA 61 +#define STA2X11_GPIO62_I2C1_SCL 62 +#define STA2X11_GPIO63_I2C1_SDA 63 +#define STA2X11_GPIO64_I2C2_SCL 64 +#define STA2X11_GPIO65_I2C2_SDA 65 +#define STA2X11_GPIO66_I2C3_SCL 66 +#define STA2X11_GPIO67_I2C3_SDA 67 +#define STA2X11_GPIO68_MSP0_RCK 68 +#define STA2X11_GPIO69_MSP0_RXD 69 +#define STA2X11_GPIO70_MSP0_RFS 70 +#define STA2X11_GPIO71_MSP0_TCK 71 +#define STA2X11_GPIO72_MSP0_TXD 72 +#define STA2X11_GPIO73_MSP0_TFS 73 +#define STA2X11_GPIO74_MSP0_SCK 74 +#define STA2X11_GPIO75_MSP1_CK 75 +#define STA2X11_GPIO76_MSP1_RXD 76 +#define STA2X11_GPIO77_MSP1_FS 77 +#define STA2X11_GPIO78_MSP1_TXD 78 +#define STA2X11_GPIO79_MSP2_CK 79 +#define STA2X11_GPIO80_MSP2_RXD 80 +#define STA2X11_GPIO81_MSP2_FS 81 +#define STA2X11_GPIO82_MSP2_TXD 82 +#define STA2X11_GPIO83_MSP3_CK 83 +#define STA2X11_GPIO84_MSP3_RXD 84 +#define STA2X11_GPIO85_MSP3_FS 85 +#define STA2X11_GPIO86_MSP3_TXD 86 +#define STA2X11_GPIO87_MSP4_CK 87 +#define STA2X11_GPIO88_MSP4_RXD 88 +#define STA2X11_GPIO89_MSP4_FS 89 +#define STA2X11_GPIO90_MSP4_TXD 90 +#define STA2X11_GPIO91_MSP5_CK 91 +#define STA2X11_GPIO92_MSP5_RXD 92 +#define STA2X11_GPIO93_MSP5_FS 93 +#define STA2X11_GPIO94_MSP5_TXD 94 +#define STA2X11_GPIO95_SDIO3_DAT3 95 +#define STA2X11_GPIO96_SDIO3_DAT2 96 +#define STA2X11_GPIO97_SDIO3_DAT1 97 +#define STA2X11_GPIO98_SDIO3_DAT0 98 +#define STA2X11_GPIO99_SDIO3_CLK 99 +#define STA2X11_GPIO100_SDIO3_CMD 100 +#define STA2X11_GPIO101 101 +#define STA2X11_GPIO102 102 +#define STA2X11_GPIO103 103 +#define STA2X11_GPIO104 104 +#define STA2X11_GPIO105_SDIO2_DAT3 105 +#define STA2X11_GPIO106_SDIO2_DAT2 106 +#define STA2X11_GPIO107_SDIO2_DAT1 107 +#define STA2X11_GPIO108_SDIO2_DAT0 108 +#define STA2X11_GPIO109_SDIO2_CLK 109 +#define STA2X11_GPIO110_SDIO2_CMD 110 +#define STA2X11_GPIO111 111 +#define STA2X11_GPIO112 112 +#define STA2X11_GPIO113 113 +#define STA2X11_GPIO114 114 +#define STA2X11_GPIO115_SDIO1_DAT3 115 +#define STA2X11_GPIO116_SDIO1_DAT2 116 +#define STA2X11_GPIO117_SDIO1_DAT1 117 +#define STA2X11_GPIO118_SDIO1_DAT0 118 +#define STA2X11_GPIO119_SDIO1_CLK 119 +#define STA2X11_GPIO120_SDIO1_CMD 120 +#define STA2X11_GPIO121 121 +#define STA2X11_GPIO122 122 +#define STA2X11_GPIO123 123 +#define STA2X11_GPIO124 124 +#define STA2X11_GPIO125_UART2_TXD 125 +#define STA2X11_GPIO126_UART2_RXD 126 +#define STA2X11_GPIO127_UART3_TXD 127 + +/* + * The APB bridge has its own registers, needed by our users as well. + * They are accessed with the following read/mask/write function. + */ +u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); + +/* CAN and MLB */ +#define APBREG_BSR 0x00 /* Bridge Status Reg */ +#define APBREG_PAER 0x08 /* Peripherals Address Error Reg */ +#define APBREG_PWAC 0x20 /* Peripheral Write Access Control reg */ +#define APBREG_PRAC 0x40 /* Peripheral Read Access Control reg */ +#define APBREG_PCG 0x60 /* Peripheral Clock Gating Reg */ +#define APBREG_PUR 0x80 /* Peripheral Under Reset Reg */ +#define APBREG_EMU_PCG 0xA0 /* Emulator Peripheral Clock Gating Reg */ + +#define APBREG_CAN (1 << 1) +#define APBREG_MLB (1 << 3) + +/* SARAC */ +#define APBREG_BSR_SARAC 0x100 /* Bridge Status Reg */ +#define APBREG_PAER_SARAC 0x108 /* Peripherals Address Error Reg */ +#define APBREG_PWAC_SARAC 0x120 /* Peripheral Write Access Control reg */ +#define APBREG_PRAC_SARAC 0x140 /* Peripheral Read Access Control reg */ +#define APBREG_PCG_SARAC 0x160 /* Peripheral Clock Gating Reg */ +#define APBREG_PUR_SARAC 0x180 /* Peripheral Under Reset Reg */ +#define APBREG_EMU_PCG_SARAC 0x1A0 /* Emulator Peripheral Clock Gating Reg */ + +#define APBREG_SARAC (1 << 2) + +/* + * The system controller has its own registers. Some of these are accessed + * by out users as well, using the following read/mask/write/function + */ +u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); + +#define SCTL_SCCTL 0x00 /* System controller control register */ +#define SCTL_ARMCFG 0x04 /* ARM configuration register */ +#define SCTL_SCPLLCTL 0x08 /* PLL control status register */ +#define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ +#define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ +#define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ +#define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ +#define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ +#define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ +#define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ +#define SCTL_SCGRST 0x28 /* Peripheral global reset */ +#define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ +#define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ +#define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ +#define SCTL_SCPCIPMSR2 0x3c /* PCI power management status 2 */ +#define SCTL_SCPCIPMSR3 0x40 /* PCI power management status 3 */ +#define SCTL_SCINTREN 0x44 /* Interrupt enable */ +#define SCTL_SCRISR 0x48 /* RAW interrupt status */ +#define SCTL_SCCLKSTAT0 0x4c /* Peripheral clocks status 0 */ +#define SCTL_SCCLKSTAT1 0x50 /* Peripheral clocks status 1 */ +#define SCTL_SCCLKSTAT2 0x54 /* Peripheral clocks status 2 */ +#define SCTL_SCRSTSTA 0x58 /* Reset status register */ + +#define SCTL_SCRESCTRL1_USB_PHY_POR (1 << 0) +#define SCTL_SCRESCTRL1_USB_OTG (1 << 1) +#define SCTL_SCRESCTRL1_USB_HRST (1 << 2) +#define SCTL_SCRESCTRL1_USB_PHY_HOST (1 << 3) +#define SCTL_SCRESCTRL1_SATAII (1 << 4) +#define SCTL_SCRESCTRL1_VIP (1 << 5) +#define SCTL_SCRESCTRL1_PER_MMC0 (1 << 6) +#define SCTL_SCRESCTRL1_PER_MMC1 (1 << 7) +#define SCTL_SCRESCTRL1_PER_GPIO0 (1 << 8) +#define SCTL_SCRESCTRL1_PER_GPIO1 (1 << 9) +#define SCTL_SCRESCTRL1_PER_GPIO2 (1 << 10) +#define SCTL_SCRESCTRL1_PER_GPIO3 (1 << 11) +#define SCTL_SCRESCTRL1_PER_MTU0 (1 << 12) +#define SCTL_SCRESCTRL1_KER_SPI0 (1 << 13) +#define SCTL_SCRESCTRL1_KER_SPI1 (1 << 14) +#define SCTL_SCRESCTRL1_KER_SPI2 (1 << 15) +#define SCTL_SCRESCTRL1_KER_MCI0 (1 << 16) +#define SCTL_SCRESCTRL1_KER_MCI1 (1 << 17) +#define SCTL_SCRESCTRL1_PRE_HSI2C0 (1 << 18) +#define SCTL_SCRESCTRL1_PER_HSI2C1 (1 << 19) +#define SCTL_SCRESCTRL1_PER_HSI2C2 (1 << 20) +#define SCTL_SCRESCTRL1_PER_HSI2C3 (1 << 21) +#define SCTL_SCRESCTRL1_PER_MSP0 (1 << 22) +#define SCTL_SCRESCTRL1_PER_MSP1 (1 << 23) +#define SCTL_SCRESCTRL1_PER_MSP2 (1 << 24) +#define SCTL_SCRESCTRL1_PER_MSP3 (1 << 25) +#define SCTL_SCRESCTRL1_PER_MSP4 (1 << 26) +#define SCTL_SCRESCTRL1_PER_MSP5 (1 << 27) +#define SCTL_SCRESCTRL1_PER_MMC (1 << 28) +#define SCTL_SCRESCTRL1_KER_MSP0 (1 << 29) +#define SCTL_SCRESCTRL1_KER_MSP1 (1 << 30) +#define SCTL_SCRESCTRL1_KER_MSP2 (1 << 31) + +#define SCTL_SCPEREN0_UART0 (1 << 0) +#define SCTL_SCPEREN0_UART1 (1 << 1) +#define SCTL_SCPEREN0_UART2 (1 << 2) +#define SCTL_SCPEREN0_UART3 (1 << 3) +#define SCTL_SCPEREN0_MSP0 (1 << 4) +#define SCTL_SCPEREN0_MSP1 (1 << 5) +#define SCTL_SCPEREN0_MSP2 (1 << 6) +#define SCTL_SCPEREN0_MSP3 (1 << 7) +#define SCTL_SCPEREN0_MSP4 (1 << 8) +#define SCTL_SCPEREN0_MSP5 (1 << 9) +#define SCTL_SCPEREN0_SPI0 (1 << 10) +#define SCTL_SCPEREN0_SPI1 (1 << 11) +#define SCTL_SCPEREN0_SPI2 (1 << 12) +#define SCTL_SCPEREN0_I2C0 (1 << 13) +#define SCTL_SCPEREN0_I2C1 (1 << 14) +#define SCTL_SCPEREN0_I2C2 (1 << 15) +#define SCTL_SCPEREN0_I2C3 (1 << 16) +#define SCTL_SCPEREN0_SVDO_LVDS (1 << 17) +#define SCTL_SCPEREN0_USB_HOST (1 << 18) +#define SCTL_SCPEREN0_USB_OTG (1 << 19) +#define SCTL_SCPEREN0_MCI0 (1 << 20) +#define SCTL_SCPEREN0_MCI1 (1 << 21) +#define SCTL_SCPEREN0_MCI2 (1 << 22) +#define SCTL_SCPEREN0_MCI3 (1 << 23) +#define SCTL_SCPEREN0_SATA (1 << 24) +#define SCTL_SCPEREN0_ETHERNET (1 << 25) +#define SCTL_SCPEREN0_VIC (1 << 26) +#define SCTL_SCPEREN0_DMA_AUDIO (1 << 27) +#define SCTL_SCPEREN0_DMA_SOC (1 << 28) +#define SCTL_SCPEREN0_RAM (1 << 29) +#define SCTL_SCPEREN0_VIP (1 << 30) +#define SCTL_SCPEREN0_ARM (1 << 31) + +#define SCTL_SCPEREN1_UART0 (1 << 0) +#define SCTL_SCPEREN1_UART1 (1 << 1) +#define SCTL_SCPEREN1_UART2 (1 << 2) +#define SCTL_SCPEREN1_UART3 (1 << 3) +#define SCTL_SCPEREN1_MSP0 (1 << 4) +#define SCTL_SCPEREN1_MSP1 (1 << 5) +#define SCTL_SCPEREN1_MSP2 (1 << 6) +#define SCTL_SCPEREN1_MSP3 (1 << 7) +#define SCTL_SCPEREN1_MSP4 (1 << 8) +#define SCTL_SCPEREN1_MSP5 (1 << 9) +#define SCTL_SCPEREN1_SPI0 (1 << 10) +#define SCTL_SCPEREN1_SPI1 (1 << 11) +#define SCTL_SCPEREN1_SPI2 (1 << 12) +#define SCTL_SCPEREN1_I2C0 (1 << 13) +#define SCTL_SCPEREN1_I2C1 (1 << 14) +#define SCTL_SCPEREN1_I2C2 (1 << 15) +#define SCTL_SCPEREN1_I2C3 (1 << 16) +#define SCTL_SCPEREN1_USB_PHY (1 << 17) + +#endif /* __STA2X11_MFD_H */ -- cgit v1.2.3-59-g8ed1b