From a87ae8a963bde755b0962bcc18db83d611f63e7a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Feb 2020 15:49:27 +0000 Subject: net: add helpers to resolve negotiated flow control Add a couple of helpers to resolve negotiated flow control. Two helpers are provided: - linkmode_resolve_pause() which takes the link partner and local advertisements, and decodes whether we should enable TX or RX pause at the MAC. This is useful outside of phylib, e.g. in phylink. - phy_get_pause(), which returns the TX/RX enablement status for the current negotiation results of the PHY. This allows us to centralise the flow control resolution, rather than spreading it around. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- include/linux/phy.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index c570e162e05e..80f8b2158271 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1257,6 +1257,9 @@ void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx, void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx); bool phy_validate_pause(struct phy_device *phydev, struct ethtool_pauseparam *pp); +void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause); +void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv, + bool *tx_pause, bool *rx_pause); int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, int (*run)(struct phy_device *)); -- cgit v1.3-14-g43fede From ce69e2162f158d9d4a0e513971d02dabc7d14cb7 Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Mon, 24 Feb 2020 16:53:58 -0600 Subject: mdio_bus: Add generic mdio_find_bus() It appears most ethernet drivers follow one of two main strategies for mdio bus/phy management. A monolithic model where the net driver itself creates, probes and uses the phy, and one where an external mdio/phy driver instantiates the mdio bus/phy and the net driver only attaches to a known phy. Usually in this latter model the phys are discovered via DT relationships or simply phy name/address hardcoding. This is a shame because modern well behaved mdio buses are self describing and can be probed. The mdio layer itself is fully capable of this, yet there isn't a clean way for a standalone net driver to attach and enumerate the discovered devices. This is because outside of of_mdio_find_bus() there isn't a straightforward way to acquire the mii_bus pointer. So, lets add a mdio_find_bus which can return the mii_bus based only on its name. Signed-off-by: Jeremy Linton Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 17 +++++++++++++++++ include/linux/phy.h | 1 + 2 files changed, 18 insertions(+) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 9bb9f37f21dc..3ab9ca7614d1 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -462,6 +462,23 @@ static struct class mdio_bus_class = { .dev_groups = mdio_bus_groups, }; +/** + * mdio_find_bus - Given the name of a mdiobus, find the mii_bus. + * @mdio_bus_np: Pointer to the mii_bus. + * + * Returns a reference to the mii_bus, or NULL if none found. The + * embedded struct device will have its reference count incremented, + * and this must be put_deviced'ed once the bus is finished with. + */ +struct mii_bus *mdio_find_bus(const char *mdio_name) +{ + struct device *d; + + d = class_find_device_by_name(&mdio_bus_class, mdio_name); + return d ? to_mii_bus(d) : NULL; +} +EXPORT_SYMBOL(mdio_find_bus); + #if IS_ENABLED(CONFIG_OF_MDIO) /** * of_mdio_find_bus - Given an mii_bus node, find the mii_bus. diff --git a/include/linux/phy.h b/include/linux/phy.h index 80f8b2158271..e72dbd0d2d6a 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -289,6 +289,7 @@ static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev) return devm_mdiobus_alloc_size(dev, 0); } +struct mii_bus *mdio_find_bus(const char *mdio_name); void devm_mdiobus_free(struct device *dev, struct mii_bus *bus); struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); -- cgit v1.3-14-g43fede From 58b05e58d155fd5a9a181d51b4c9c8a69a0816d3 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Thu, 12 Mar 2020 18:10:09 +0100 Subject: net: phy: Add XLGMII interface define Add a define for XLGMII interface. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- include/linux/phy.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 7a08023bdbc5..6b872aed8ba6 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -94,6 +94,7 @@ typedef enum { PHY_INTERFACE_MODE_RTBI, PHY_INTERFACE_MODE_SMII, PHY_INTERFACE_MODE_XGMII, + PHY_INTERFACE_MODE_XLGMII, PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, @@ -165,6 +166,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "smii"; case PHY_INTERFACE_MODE_XGMII: return "xgmii"; + case PHY_INTERFACE_MODE_XLGMII: + return "xlgmii"; case PHY_INTERFACE_MODE_MOCA: return "moca"; case PHY_INTERFACE_MODE_QSGMII: -- cgit v1.3-14-g43fede From 9010f9deb000edce823cb79345f137742ccffa19 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 16 Mar 2020 22:32:33 +0100 Subject: net: phy: improve phy_driver callback handle_interrupt did_interrupt() clears the interrupt, therefore handle_interrupt() can not check which event triggered the interrupt. To overcome this constraint and allow more flexibility for customer interrupt handlers, let's decouple handle_interrupt() from parts of the phylib interrupt handling. Custom interrupt handlers now have to implement the did_interrupt() functionality in handle_interrupt() if needed. Fortunately we have just one custom interrupt handler so far (in the mscc PHY driver), convert it to the changed API. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/mscc/mscc_main.c | 11 +++++++++-- drivers/net/phy/phy.c | 26 ++++++++++++-------------- include/linux/phy.h | 3 ++- 3 files changed, 23 insertions(+), 17 deletions(-) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c index cb4d65f81095..4727aba8e051 100644 --- a/drivers/net/phy/mscc/mscc_main.c +++ b/drivers/net/phy/mscc/mscc_main.c @@ -1429,11 +1429,18 @@ err: return ret; } -static int vsc8584_handle_interrupt(struct phy_device *phydev) +static irqreturn_t vsc8584_handle_interrupt(struct phy_device *phydev) { + int irq_status; + + irq_status = phy_read(phydev, MII_VSC85XX_INT_STATUS); + if (irq_status < 0 || !(irq_status & MII_VSC85XX_INT_MASK_MASK)) + return IRQ_NONE; + vsc8584_handle_macsec_interrupt(phydev); phy_mac_interrupt(phydev); - return 0; + + return IRQ_HANDLED; } static int vsc85xx_config_init(struct phy_device *phydev) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 355bfdef48d2..d71212a418f3 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -715,26 +715,24 @@ static int phy_disable_interrupts(struct phy_device *phydev) static irqreturn_t phy_interrupt(int irq, void *phy_dat) { struct phy_device *phydev = phy_dat; + struct phy_driver *drv = phydev->drv; - if (phydev->drv->did_interrupt && !phydev->drv->did_interrupt(phydev)) + if (drv->handle_interrupt) + return drv->handle_interrupt(phydev); + + if (drv->did_interrupt && !drv->did_interrupt(phydev)) return IRQ_NONE; - if (phydev->drv->handle_interrupt) { - if (phydev->drv->handle_interrupt(phydev)) - goto phy_err; - } else { - /* reschedule state queue work to run as soon as possible */ - phy_trigger_machine(phydev); - } + /* reschedule state queue work to run as soon as possible */ + phy_trigger_machine(phydev); /* did_interrupt() may have cleared the interrupt already */ - if (!phydev->drv->did_interrupt && phy_clear_interrupt(phydev)) - goto phy_err; - return IRQ_HANDLED; + if (!drv->did_interrupt && phy_clear_interrupt(phydev)) { + phy_error(phydev); + return IRQ_NONE; + } -phy_err: - phy_error(phydev); - return IRQ_NONE; + return IRQ_HANDLED; } /** diff --git a/include/linux/phy.h b/include/linux/phy.h index 6b872aed8ba6..cb5a2182ba6d 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -568,7 +569,7 @@ struct phy_driver { int (*did_interrupt)(struct phy_device *phydev); /* Override default interrupt handling */ - int (*handle_interrupt)(struct phy_device *phydev); + irqreturn_t (*handle_interrupt)(struct phy_device *phydev); /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit v1.3-14-g43fede From 6cc7cf8125b3d086cd80c96e02edb6f4ab9b20fa Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 17 Mar 2020 14:52:31 +0000 Subject: net: mdiobus: add APIs for modifying a MDIO device register Add APIs for modifying a MDIO device register, similar to the existing phy_modify() group of functions, but at mdiobus level instead. Adapt __phy_modify_changed() to use the new mdiobus level helper. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy-core.c | 31 ------------------------- include/linux/mdio.h | 4 ++++ include/linux/phy.h | 19 ++++++++++++++++ 4 files changed, 79 insertions(+), 31 deletions(-) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 129e60630319..522760c8bca6 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -824,6 +824,38 @@ int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val) } EXPORT_SYMBOL(__mdiobus_write); +/** + * __mdiobus_modify_changed - Unlocked version of the mdiobus_modify function + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to modify + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * Read, modify, and if any change, write the register value back to the + * device. Any error returns a negative number. + * + * NOTE: MUST NOT be called from interrupt context. + */ +int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum, + u16 mask, u16 set) +{ + int new, ret; + + ret = __mdiobus_read(bus, addr, regnum); + if (ret < 0) + return ret; + + new = (ret & ~mask) | set; + if (new == ret) + return 0; + + ret = __mdiobus_write(bus, addr, regnum, new); + + return ret < 0 ? ret : 1; +} +EXPORT_SYMBOL_GPL(__mdiobus_modify_changed); + /** * mdiobus_read_nested - Nested version of the mdiobus_read function * @bus: the mii_bus struct @@ -932,6 +964,30 @@ int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val) } EXPORT_SYMBOL(mdiobus_write); +/** + * mdiobus_modify - Convenience function for modifying a given mdio device + * register + * @bus: the mii_bus struct + * @addr: the phy address + * @regnum: register number to write + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + */ +int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask, u16 set) +{ + int err; + + if (WARN_ON_ONCE(in_interrupt())) + return -EINVAL; + + mutex_lock(&bus->mdio_lock); + err = __mdiobus_modify_changed(bus, addr, regnum, mask, set); + mutex_unlock(&bus->mdio_lock); + + return err < 0 ? err : 0; +} +EXPORT_SYMBOL_GPL(mdiobus_modify); + /** * mdio_bus_match - determine if given MDIO driver supports the given * MDIO device diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index e083e7a76ada..94cd85b1e49b 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -488,37 +488,6 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val) } EXPORT_SYMBOL(phy_write_mmd); -/** - * __phy_modify_changed() - Convenience function for modifying a PHY register - * @phydev: a pointer to a &struct phy_device - * @regnum: register number - * @mask: bit mask of bits to clear - * @set: bit mask of bits to set - * - * Unlocked helper function which allows a PHY register to be modified as - * new register value = (old register value & ~mask) | set - * - * Returns negative errno, 0 if there was no change, and 1 in case of change - */ -int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, - u16 set) -{ - int new, ret; - - ret = __phy_read(phydev, regnum); - if (ret < 0) - return ret; - - new = (ret & ~mask) | set; - if (new == ret) - return 0; - - ret = __phy_write(phydev, regnum, new); - - return ret < 0 ? ret : 1; -} -EXPORT_SYMBOL_GPL(__phy_modify_changed); - /** * phy_modify_changed - Function for modifying a PHY register * @phydev: the phy_device struct diff --git a/include/linux/mdio.h b/include/linux/mdio.h index a7604248777b..917e4bb2ed71 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -316,11 +316,15 @@ static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising, int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); +int __mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum, + u16 mask, u16 set); int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum); int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val); +int mdiobus_modify(struct mii_bus *bus, int addr, u32 regnum, u16 mask, + u16 set); int mdiobus_register_device(struct mdio_device *mdiodev); int mdiobus_unregister_device(struct mdio_device *mdiodev); diff --git a/include/linux/phy.h b/include/linux/phy.h index cb5a2182ba6d..36d9dea04016 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -754,6 +754,25 @@ static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val) val); } +/** + * __phy_modify_changed() - Convenience function for modifying a PHY register + * @phydev: a pointer to a &struct phy_device + * @regnum: register number + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * Unlocked helper function which allows a PHY register to be modified as + * new register value = (old register value & ~mask) | set + * + * Returns negative errno, 0 if there was no change, and 1 in case of change + */ +static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, + u16 mask, u16 set) +{ + return __mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, + regnum, mask, set); +} + /** * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. -- cgit v1.3-14-g43fede From 5eee3bb7103f4a66e4b90c2817f5e72509a2a607 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Fri, 20 Mar 2020 17:51:38 +0100 Subject: net: phy: add and use phy_check_downshift So far PHY drivers have to check whether a downshift occurred to be able to notify the user. To make life of drivers authors a little bit easier move the downshift notification to phylib. phy_check_downshift() compares the highest mutually advertised speed with the actual value of phydev->speed (typically read by the PHY driver from a vendor-specific register) to detect a downshift. v2: - Add downshift hint to phy_print_status Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/phy-core.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 4 +++- include/linux/phy.h | 3 +++ 3 files changed, 44 insertions(+), 1 deletion(-) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 94cd85b1e49b..66b8c61ca74c 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -329,6 +329,44 @@ void phy_resolve_aneg_linkmode(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode); +/** + * phy_check_downshift - check whether downshift occurred + * @phydev: The phy_device struct + * + * Check whether a downshift to a lower speed occurred. If this should be the + * case warn the user. + * Prerequisite for detecting downshift is that PHY driver implements the + * read_status callback and sets phydev->speed to the actual link speed. + */ +void phy_check_downshift(struct phy_device *phydev) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(common); + int i, speed = SPEED_UNKNOWN; + + phydev->downshifted_rate = 0; + + if (phydev->autoneg == AUTONEG_DISABLE || + phydev->speed == SPEED_UNKNOWN) + return; + + linkmode_and(common, phydev->lp_advertising, phydev->advertising); + + for (i = 0; i < ARRAY_SIZE(settings); i++) + if (test_bit(settings[i].bit, common)) { + speed = settings[i].speed; + break; + } + + if (speed == SPEED_UNKNOWN || phydev->speed >= speed) + return; + + phydev_warn(phydev, "Downshift occurred from negotiated speed %s to actual speed %s, check cabling!\n", + phy_speed_to_str(speed), phy_speed_to_str(phydev->speed)); + + phydev->downshifted_rate = 1; +} +EXPORT_SYMBOL_GPL(phy_check_downshift); + static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only) { __ETHTOOL_DECLARE_LINK_MODE_MASK(common); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d71212a418f3..72c69a9c8a98 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -96,9 +96,10 @@ void phy_print_status(struct phy_device *phydev) { if (phydev->link) { netdev_info(phydev->attached_dev, - "Link is Up - %s/%s - flow control %s\n", + "Link is Up - %s/%s %s- flow control %s\n", phy_speed_to_str(phydev->speed), phy_duplex_to_str(phydev->duplex), + phydev->downshifted_rate ? "(downshifted) " : "", phy_pause_str(phydev)); } else { netdev_info(phydev->attached_dev, "Link is Down\n"); @@ -507,6 +508,7 @@ static int phy_check_link_status(struct phy_device *phydev) return err; if (phydev->link && phydev->state != PHY_RUNNING) { + phy_check_downshift(phydev); phydev->state = PHY_RUNNING; phy_link_up(phydev); } else if (!phydev->link && phydev->state != PHY_NOLINK) { diff --git a/include/linux/phy.h b/include/linux/phy.h index 36d9dea04016..99b5e3c4b621 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -365,6 +365,7 @@ struct macsec_ops; * suspended_by_mdio_bus: Set to true if this phy was suspended by MDIO bus. * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal. * loopback_enabled: Set true if this phy has been loopbacked successfully. + * downshifted_rate: Set true if link speed has been downshifted. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * irq: IRQ number of the PHY's interrupt (-1 if none) @@ -405,6 +406,7 @@ struct phy_device { unsigned suspended_by_mdio_bus:1; unsigned sysfs_links:1; unsigned loopback_enabled:1; + unsigned downshifted_rate:1; unsigned autoneg:1; /* The most recently read link state */ @@ -698,6 +700,7 @@ static inline bool phy_is_started(struct phy_device *phydev) void phy_resolve_aneg_pause(struct phy_device *phydev); void phy_resolve_aneg_linkmode(struct phy_device *phydev); +void phy_check_downshift(struct phy_device *phydev); /** * phy_read - Convenience function for reading a given PHY register -- cgit v1.3-14-g43fede From bd971ff0b73927b91f4520621d49d3a801ee4837 Mon Sep 17 00:00:00 2001 From: Dejin Zheng Date: Mon, 23 Mar 2020 23:05:53 +0800 Subject: net: phy: introduce phy_read_mmd_poll_timeout macro it is sometimes necessary to poll a phy register by phy_read_mmd() function until its value satisfies some condition. introduce phy_read_mmd_poll_timeout() macros that do this. Suggested-by: Andrew Lunn Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Dejin Zheng Signed-off-by: David S. Miller --- include/linux/phy.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 99b5e3c4b621..3984f375126e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -24,6 +24,7 @@ #include #include #include +#include #include @@ -787,6 +788,19 @@ static inline int __phy_modify_changed(struct phy_device *phydev, u32 regnum, */ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum); +#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \ + sleep_us, timeout_us, sleep_before_read) \ +({ \ + int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \ + sleep_us, timeout_us, sleep_before_read, \ + phydev, devaddr, regnum); \ + if (val < 0) \ + __ret = val; \ + if (__ret) \ + phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ + __ret; \ +}) + /** * __phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. -- cgit v1.3-14-g43fede From fcbd30d09ba05389cb40cc1769b565df62aead35 Mon Sep 17 00:00:00 2001 From: Dejin Zheng Date: Mon, 23 Mar 2020 23:05:57 +0800 Subject: net: phy: introduce phy_read_poll_timeout macro it is sometimes necessary to poll a phy register by phy_read() function until its value satisfies some condition. introduce phy_read_poll_timeout() macros that do this. Suggested-by: Andrew Lunn Reviewed-by: Andrew Lunn Signed-off-by: Dejin Zheng Signed-off-by: David S. Miller --- include/linux/phy.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 3984f375126e..2432ca463ddc 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -717,6 +717,19 @@ static inline int phy_read(struct phy_device *phydev, u32 regnum) return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum); } +#define phy_read_poll_timeout(phydev, regnum, val, cond, sleep_us, \ + timeout_us, sleep_before_read) \ +({ \ + int __ret = read_poll_timeout(phy_read, val, (cond) || val < 0, \ + sleep_us, timeout_us, sleep_before_read, phydev, regnum); \ + if (val < 0) \ + __ret = val; \ + if (__ret) \ + phydev_err(phydev, "%s failed: %d\n", __func__, __ret); \ + __ret; \ +}) + + /** * __phy_read - convenience function for reading a given PHY register * @phydev: the phy_device struct -- cgit v1.3-14-g43fede