From 8d99339710ac9bd1eca8f04a356752c89dc7cf0b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 19 Nov 2013 23:02:11 +0100 Subject: pinctrl: nomadik: move platform data handling into driver This decomissions the platform data header (which is no longer in use after the systems using this driver were switched to a pure device-tree config path) and merges the result into the driver file or local driver header. Signed-off-by: Linus Walleij --- include/linux/platform_data/pinctrl-nomadik.h | 242 -------------------------- 1 file changed, 242 deletions(-) delete mode 100644 include/linux/platform_data/pinctrl-nomadik.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h deleted file mode 100644 index abf5bed84df3..000000000000 --- a/include/linux/platform_data/pinctrl-nomadik.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR - * Copyright (C) 2009 Alessandro Rubini - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -#define GPIO_BLOCK_SHIFT 5 -#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 -/* These appear in DB8540 and later ASICs */ -#define NMK_GPIO_EDGELEVEL 0x5C -#define NMK_GPIO_LEVEL 0x60 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1< Date: Tue, 19 Nov 2013 22:23:21 +0100 Subject: clksrc: delete nomadik MTU non-DT boot path Both platforms using the MTU (Nomadik and Ux500) have now been converted to use device tree exclusively, thus let us delete this platform data header and make this driver a fully self-contained DT-only driver. Cc: Thomas Gleixner Cc: Lee Jones Acked-by: Daniel Lezcano Signed-off-by: Linus Walleij --- drivers/clocksource/nomadik-mtu.c | 23 +++++----------------- .../linux/platform_data/clocksource-nomadik-mtu.h | 9 --------- 2 files changed, 5 insertions(+), 27 deletions(-) delete mode 100644 include/linux/platform_data/clocksource-nomadik-mtu.h (limited to 'include/linux/platform_data') diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index ed7b73b508e0..f00b5c9ce8b6 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include @@ -103,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) return 0; } -void nmdk_clkevt_reset(void) +static void nmdk_clkevt_reset(void) { if (clkevt_periodic) { /* Timer: configure load and background-load, and fire it up */ @@ -144,7 +143,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } -void nmdk_clksrc_reset(void) +static void nmdk_clksrc_reset(void) { /* Disable */ writel(0, mtu_base + MTU_CR(0)); @@ -192,8 +191,8 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -static void __init __nmdk_timer_init(void __iomem *base, int irq, - struct clk *pclk, struct clk *clk) +static void __init nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; @@ -245,18 +244,6 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq, register_current_timer_delay(&mtu_delay_timer); } -void __init nmdk_timer_init(void __iomem *base, int irq) -{ - struct clk *clk0, *pclk0; - - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - - __nmdk_timer_init(base, irq, pclk0, clk0); -} - static void __init nmdk_timer_of_init(struct device_node *node) { struct clk *pclk; @@ -280,7 +267,7 @@ static void __init nmdk_timer_of_init(struct device_node *node) if (irq <= 0) panic("Can't parse IRQ"); - __nmdk_timer_init(base, irq, pclk, clk); + nmdk_timer_init(base, irq, pclk, clk); } CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", nmdk_timer_of_init); diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h deleted file mode 100644 index 80088973b734..000000000000 --- a/include/linux/platform_data/clocksource-nomadik-mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base, int irq); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - -- cgit v1.2.3-59-g8ed1b