From de4217d90fed1b1714a270ceb5d092f7314e8bda Mon Sep 17 00:00:00 2001 From: Venu Byravarasu Date: Tue, 4 Sep 2012 14:25:58 +0530 Subject: usb: otg: Move phy interface to separate file. As otg.h is containing lots of phy interface related stuff, moving all phy interface related stuff to new file named phy.h Signed-off-by: Venu Byravarasu Signed-off-by: Felipe Balbi --- include/linux/usb/phy.h | 208 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 include/linux/usb/phy.h (limited to 'include/linux/usb/phy.h') diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h new file mode 100644 index 000000000000..88fc16062e77 --- /dev/null +++ b/include/linux/usb/phy.h @@ -0,0 +1,208 @@ +/* USB OTG (On The Go) defines */ +/* + * + * These APIs may be used between USB controllers. USB device drivers + * (for either host or peripheral roles) don't use these calls; they + * continue to use just usb_device and usb_gadget. + */ + +#ifndef __LINUX_USB_PHY_H +#define __LINUX_USB_PHY_H + +#include + +enum usb_phy_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + +struct usb_phy; +struct usb_otg; + +/* for transceivers connected thru an ULPI interface, the user must + * provide access ops + */ +struct usb_phy_io_ops { + int (*read)(struct usb_phy *x, u32 reg); + int (*write)(struct usb_phy *x, u32 val, u32 reg); +}; + +struct usb_phy { + struct device *dev; + const char *label; + unsigned int flags; + + enum usb_phy_type type; + enum usb_phy_events last_event; + + struct usb_otg *otg; + + struct device *io_dev; + struct usb_phy_io_ops *io_ops; + void __iomem *io_priv; + + /* for notification of usb_phy_events */ + struct atomic_notifier_head notifier; + + /* to pass extra port status to the root hub */ + u16 port_status; + u16 port_change; + + /* to support controllers that have multiple transceivers */ + struct list_head head; + + /* initialize/shutdown the OTG controller */ + int (*init)(struct usb_phy *x); + void (*shutdown)(struct usb_phy *x); + + /* effective for B devices, ignored for A-peripheral */ + int (*set_power)(struct usb_phy *x, + unsigned mA); + + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct usb_phy *x, + int suspend); + + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); +}; + + +/* for board-specific init logic */ +extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); +extern void usb_remove_phy(struct usb_phy *); + +/* helpers for direct access thru low-level io interface */ +static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) +{ + if (x->io_ops && x->io_ops->read) + return x->io_ops->read(x, reg); + + return -EINVAL; +} + +static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) +{ + if (x->io_ops && x->io_ops->write) + return x->io_ops->write(x, val, reg); + + return -EINVAL; +} + +static inline int +usb_phy_init(struct usb_phy *x) +{ + if (x->init) + return x->init(x); + + return 0; +} + +static inline void +usb_phy_shutdown(struct usb_phy *x) +{ + if (x->shutdown) + x->shutdown(x); +} + +/* for usb host and peripheral controller drivers */ +#ifdef CONFIG_USB_OTG_UTILS +extern struct usb_phy *usb_get_phy(enum usb_phy_type type); +extern struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type); +extern void usb_put_phy(struct usb_phy *); +extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); +#else +static inline struct usb_phy *usb_get_phy(enum usb_phy_type type) +{ + return NULL; +} + +static inline struct usb_phy *devm_usb_get_phy(struct device *dev, + enum usb_phy_type type) +{ + return NULL; +} + +static inline void usb_put_phy(struct usb_phy *x) +{ +} + +static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) +{ +} + +#endif + +static inline int +usb_phy_set_power(struct usb_phy *x, unsigned mA) +{ + if (x && x->set_power) + return x->set_power(x, mA); + return 0; +} + +/* Context: can sleep */ +static inline int +usb_phy_set_suspend(struct usb_phy *x, int suspend) +{ + if (x->set_suspend != NULL) + return x->set_suspend(x, suspend); + else + return 0; +} + +static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +/* notifiers */ +static inline int +usb_register_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&x->notifier, nb); +} + +static inline void +usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&x->notifier, nb); +} + +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} +#endif /* __LINUX_USB_PHY_H */ -- cgit v1.2.3-59-g8ed1b