From c1baf6c591e6901d3422d7a0d0d32ccf29883edf Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sun, 12 Sep 2021 21:17:15 +0300 Subject: usb: phy: tegra: Support OTG mode programming Support programming USB PHY into OTG mode. Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20210912181718.1328-5-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/tegra_usb_phy.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index fd1c9f6a4e37..d3e65eb9e16f 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -18,6 +18,7 @@ #include #include +#include #include #include @@ -30,6 +31,7 @@ * enter host mode * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level * and hsdiscon_level should be set for adequate signal quality + * requires_pmc_ao_power_up: true if USB AO is powered down by default */ struct tegra_phy_soc_config { @@ -37,6 +39,7 @@ struct tegra_phy_soc_config { bool has_hostpc; bool requires_usbmode_setup; bool requires_extra_tuning_parameters; + bool requires_pmc_ao_power_up; }; struct tegra_utmip_config { @@ -62,6 +65,7 @@ enum tegra_usb_phy_port_speed { struct tegra_xtal_freq; struct tegra_usb_phy { + int irq; int instance; const struct tegra_xtal_freq *freq; void __iomem *regs; @@ -70,6 +74,7 @@ struct tegra_usb_phy { struct clk *pll_u; struct clk *pad_clk; struct regulator *vbus; + struct regmap *pmc_regmap; enum usb_dr_mode mode; void *config; const struct tegra_phy_soc_config *soc_config; -- cgit v1.3-18-gd494 From 439b08c57c3fe1df85cfe9d00accdf9b62cb3275 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 3 Nov 2021 16:51:36 +0100 Subject: Revert "usb: core: hcd: Add support for deferring roothub registration" This reverts commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman Cc: Chris Chiu Cc: Alan Stern Cc: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 29 ++++++----------------------- include/linux/usb/hcd.h | 2 -- 2 files changed, 6 insertions(+), 25 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index a3311e937847..4d326ee12c36 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2795,7 +2795,6 @@ int usb_add_hcd(struct usb_hcd *hcd, { int retval; struct usb_device *rhdev; - struct usb_hcd *shared_hcd; if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); @@ -2956,26 +2955,13 @@ int usb_add_hcd(struct usb_hcd *hcd, goto err_hcd_driver_start; } - /* starting here, usbcore will pay attention to the shared HCD roothub */ - shared_hcd = hcd->shared_hcd; - if (!usb_hcd_is_primary_hcd(hcd) && shared_hcd && HCD_DEFER_RH_REGISTER(shared_hcd)) { - retval = register_root_hub(shared_hcd); - if (retval != 0) - goto err_register_root_hub; - - if (shared_hcd->uses_new_polling && HCD_POLL_RH(shared_hcd)) - usb_hcd_poll_rh_status(shared_hcd); - } - /* starting here, usbcore will pay attention to this root hub */ - if (!HCD_DEFER_RH_REGISTER(hcd)) { - retval = register_root_hub(hcd); - if (retval != 0) - goto err_register_root_hub; + retval = register_root_hub(hcd); + if (retval != 0) + goto err_register_root_hub; - if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) - usb_hcd_poll_rh_status(hcd); - } + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) + usb_hcd_poll_rh_status(hcd); return retval; @@ -3013,7 +2999,6 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); void usb_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; - bool rh_registered; dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); @@ -3024,7 +3009,6 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_dbg(hcd->self.controller, "roothub graceful disconnect\n"); spin_lock_irq (&hcd_root_hub_lock); - rh_registered = hcd->rh_registered; hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); @@ -3034,8 +3018,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->died_work); mutex_lock(&usb_bus_idr_lock); - if (rh_registered) - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_idr_lock); /* diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 2c1fc9212cf2..548a028f2dab 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -124,7 +124,6 @@ struct usb_hcd { #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ #define HCD_FLAG_DEAD 6 /* controller has died? */ #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */ -#define HCD_FLAG_DEFER_RH_REGISTER 8 /* Defer roothub registration */ /* The flags can be tested using these macros; they are likely to * be slightly faster than test_bit(). @@ -135,7 +134,6 @@ struct usb_hcd { #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) -#define HCD_DEFER_RH_REGISTER(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEFER_RH_REGISTER)) /* * Specifies if interfaces are authorized by default -- cgit v1.3-18-gd494 From 730b49aac426e1e8016d3c2dd6b407e500423821 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 23 Dec 2021 11:24:22 +0300 Subject: usb: typec: port-mapper: Convert to the component framework Instead of trying to keep track of the connections to the USB Type-C connectors separately, letting the component framework take care of that. From now on every USB Type-C connector will register itself as "aggregate" - component master - and anything that can be connected to it inside the system can then simply register itself as a generic component. The matching of the components and the connector shall rely on ACPI _PLD initially. Before registering itself as the aggregate, the connector will find all other ACPI devices that have matching _PLD crc hash with it (matching value in the pld_crc member of struct acpi_device), and add a component match entry for each one of them. Because only ACPI is supported for now, the driver shall only be build when ACPI is supported. This removes the need for the custom API that the driver exposed. The components and the connector can therefore exist completely independently of each other. The order in which they are registered, as well as are they modules or not, is now irrelevant. Acked-by: Rafael J. Wysocki Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/Makefile | 3 +- drivers/usb/typec/class.c | 2 - drivers/usb/typec/class.h | 10 +- drivers/usb/typec/port-mapper.c | 279 ++++++---------------------------------- include/linux/usb/typec.h | 12 -- 5 files changed, 46 insertions(+), 260 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index a0adb8947a30..57870a2bd787 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_TYPEC) += typec.o -typec-y := class.o mux.o bus.o port-mapper.o +typec-y := class.o mux.o bus.o +typec-$(CONFIG_ACPI) += port-mapper.o obj-$(CONFIG_TYPEC) += altmodes/ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ obj-$(CONFIG_TYPEC_UCSI) += ucsi/ diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index aeef453aa658..45a6f0c807cb 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -2039,8 +2039,6 @@ struct typec_port *typec_register_port(struct device *parent, ida_init(&port->mode_ids); mutex_init(&port->port_type_lock); - mutex_init(&port->port_list_lock); - INIT_LIST_HEAD(&port->port_list); port->id = id; port->ops = cap->ops; diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h index aef03eb7e152..0f1bd6d19d67 100644 --- a/drivers/usb/typec/class.h +++ b/drivers/usb/typec/class.h @@ -54,11 +54,6 @@ struct typec_port { const struct typec_capability *cap; const struct typec_operations *ops; - - struct list_head port_list; - struct mutex port_list_lock; /* Port list lock */ - - void *pld; }; #define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev) @@ -79,7 +74,12 @@ extern const struct device_type typec_port_dev_type; extern struct class typec_mux_class; extern struct class typec_class; +#if defined(CONFIG_ACPI) int typec_link_ports(struct typec_port *connector); void typec_unlink_ports(struct typec_port *connector); +#else +static inline int typec_link_ports(struct typec_port *connector) { return 0; } +static inline void typec_unlink_ports(struct typec_port *connector) { } +#endif #endif /* __USB_TYPEC_CLASS__ */ diff --git a/drivers/usb/typec/port-mapper.c b/drivers/usb/typec/port-mapper.c index 9b0991bdf391..07d307418b47 100644 --- a/drivers/usb/typec/port-mapper.c +++ b/drivers/usb/typec/port-mapper.c @@ -7,273 +7,72 @@ */ #include -#include -#include +#include #include "class.h" -struct port_node { - struct list_head list; - struct device *dev; - void *pld; -}; - -static int acpi_pld_match(const struct acpi_pld_info *pld1, - const struct acpi_pld_info *pld2) -{ - if (!pld1 || !pld2) - return 0; - - /* - * To speed things up, first checking only the group_position. It seems - * to often have the first unique value in the _PLD. - */ - if (pld1->group_position == pld2->group_position) - return !memcmp(pld1, pld2, sizeof(struct acpi_pld_info)); - - return 0; -} - -static void *get_pld(struct device *dev) +static int typec_aggregate_bind(struct device *dev) { -#ifdef CONFIG_ACPI - struct acpi_pld_info *pld; - acpi_status status; - - if (!has_acpi_companion(dev)) - return NULL; - - status = acpi_get_physical_device_location(ACPI_HANDLE(dev), &pld); - if (ACPI_FAILURE(status)) - return NULL; - - return pld; -#else - return NULL; -#endif -} - -static void free_pld(void *pld) -{ -#ifdef CONFIG_ACPI - ACPI_FREE(pld); -#endif + return component_bind_all(dev, NULL); } -static int __link_port(struct typec_port *con, struct port_node *node) +static void typec_aggregate_unbind(struct device *dev) { - int ret; - - ret = sysfs_create_link(&node->dev->kobj, &con->dev.kobj, "connector"); - if (ret) - return ret; - - ret = sysfs_create_link(&con->dev.kobj, &node->dev->kobj, - dev_name(node->dev)); - if (ret) { - sysfs_remove_link(&node->dev->kobj, "connector"); - return ret; - } - - list_add_tail(&node->list, &con->port_list); - - return 0; + component_unbind_all(dev, NULL); } -static int link_port(struct typec_port *con, struct port_node *node) -{ - int ret; - - mutex_lock(&con->port_list_lock); - ret = __link_port(con, node); - mutex_unlock(&con->port_list_lock); - - return ret; -} - -static void __unlink_port(struct typec_port *con, struct port_node *node) -{ - sysfs_remove_link(&con->dev.kobj, dev_name(node->dev)); - sysfs_remove_link(&node->dev->kobj, "connector"); - list_del(&node->list); -} - -static void unlink_port(struct typec_port *con, struct port_node *node) -{ - mutex_lock(&con->port_list_lock); - __unlink_port(con, node); - mutex_unlock(&con->port_list_lock); -} - -static struct port_node *create_port_node(struct device *port) -{ - struct port_node *node; - - node = kzalloc(sizeof(*node), GFP_KERNEL); - if (!node) - return ERR_PTR(-ENOMEM); - - node->dev = get_device(port); - node->pld = get_pld(port); - - return node; -} - -static void remove_port_node(struct port_node *node) -{ - put_device(node->dev); - free_pld(node->pld); - kfree(node); -} - -static int connector_match(struct device *dev, const void *data) -{ - const struct port_node *node = data; - - if (!is_typec_port(dev)) - return 0; - - return acpi_pld_match(to_typec_port(dev)->pld, node->pld); -} - -static struct device *find_connector(struct port_node *node) -{ - if (!node->pld) - return NULL; - - return class_find_device(&typec_class, NULL, node, connector_match); -} - -/** - * typec_link_port - Link a port to its connector - * @port: The port device - * - * Find the connector of @port and create symlink named "connector" for it. - * Returns 0 on success, or errno in case of a failure. - * - * NOTE. The function increments the reference count of @port on success. - */ -int typec_link_port(struct device *port) -{ - struct device *connector; - struct port_node *node; - int ret; - - node = create_port_node(port); - if (IS_ERR(node)) - return PTR_ERR(node); - - connector = find_connector(node); - if (!connector) { - ret = 0; - goto remove_node; - } - - ret = link_port(to_typec_port(connector), node); - if (ret) - goto put_connector; - - return 0; - -put_connector: - put_device(connector); -remove_node: - remove_port_node(node); - - return ret; -} -EXPORT_SYMBOL_GPL(typec_link_port); - -static int port_match_and_unlink(struct device *connector, void *port) -{ - struct port_node *node; - struct port_node *tmp; - int ret = 0; - - if (!is_typec_port(connector)) - return 0; - - mutex_lock(&to_typec_port(connector)->port_list_lock); - list_for_each_entry_safe(node, tmp, &to_typec_port(connector)->port_list, list) { - ret = node->dev == port; - if (ret) { - unlink_port(to_typec_port(connector), node); - remove_port_node(node); - put_device(connector); - break; - } - } - mutex_unlock(&to_typec_port(connector)->port_list_lock); +static const struct component_master_ops typec_aggregate_ops = { + .bind = typec_aggregate_bind, + .unbind = typec_aggregate_unbind, +}; - return ret; -} +struct each_port_arg { + struct typec_port *port; + struct component_match *match; +}; -/** - * typec_unlink_port - Unlink port from its connector - * @port: The port device - * - * Removes the symlink "connector" and decrements the reference count of @port. - */ -void typec_unlink_port(struct device *port) +static int typec_port_compare(struct device *dev, void *fwnode) { - class_for_each_device(&typec_class, NULL, port, port_match_and_unlink); + return device_match_fwnode(dev, fwnode); } -EXPORT_SYMBOL_GPL(typec_unlink_port); -static int each_port(struct device *port, void *connector) +static int typec_port_match(struct device *dev, void *data) { - struct port_node *node; - int ret; - - node = create_port_node(port); - if (IS_ERR(node)) - return PTR_ERR(node); + struct acpi_device *adev = to_acpi_device(dev); + struct each_port_arg *arg = data; + struct acpi_device *con_adev; - if (!connector_match(connector, node)) { - remove_port_node(node); + con_adev = ACPI_COMPANION(&arg->port->dev); + if (con_adev == adev) return 0; - } - - ret = link_port(to_typec_port(connector), node); - if (ret) { - remove_port_node(node->pld); - return ret; - } - - get_device(connector); + if (con_adev->pld_crc == adev->pld_crc) + component_match_add(&arg->port->dev, &arg->match, typec_port_compare, + acpi_fwnode_handle(adev)); return 0; } int typec_link_ports(struct typec_port *con) { - int ret = 0; + struct each_port_arg arg = { .port = con, .match = NULL }; - con->pld = get_pld(&con->dev); - if (!con->pld) - return 0; + bus_for_each_dev(&acpi_bus_type, NULL, &arg, typec_port_match); - ret = usb_for_each_port(&con->dev, each_port); - if (ret) - typec_unlink_ports(con); - - return ret; + /* + * REVISIT: Now each connector can have only a single component master. + * So far only the USB ports connected to the USB Type-C connector share + * the _PLD with it, but if there one day is something else (like maybe + * the DisplayPort ACPI device object) that also shares the _PLD with + * the connector, every one of those needs to have its own component + * master, because each different type of component needs to be bind to + * the connector independently of the other components. That requires + * improvements to the component framework. Right now you can only have + * one master per device. + */ + return component_master_add_with_match(&con->dev, &typec_aggregate_ops, arg.match); } void typec_unlink_ports(struct typec_port *con) { - struct port_node *node; - struct port_node *tmp; - - mutex_lock(&con->port_list_lock); - - list_for_each_entry_safe(node, tmp, &con->port_list, list) { - __unlink_port(con, node); - remove_port_node(node); - put_device(&con->dev); - } - - mutex_unlock(&con->port_list_lock); - - free_pld(con->pld); + component_master_del(&con->dev, &typec_aggregate_ops); } diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index e2e44bb1dad8..7ba45a97eeae 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -305,16 +305,4 @@ void typec_partner_set_svdm_version(struct typec_partner *partner, enum usb_pd_svdm_ver svdm_version); int typec_get_negotiated_svdm_version(struct typec_port *port); -#if IS_REACHABLE(CONFIG_TYPEC) -int typec_link_port(struct device *port); -void typec_unlink_port(struct device *port); -#else -static inline int typec_link_port(struct device *port) -{ - return 0; -} - -static inline void typec_unlink_port(struct device *port) { } -#endif - #endif /* __LINUX_USB_TYPEC_H */ -- cgit v1.3-18-gd494 From 01ec4a2e8f01f027a0f06cad237c935da8d643bf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 3 Jul 2021 00:23:39 +0200 Subject: headers/deps: USB: Optimize dependencies, remove The header is used over 1,400 times in a typical distro build, but few of its users actually need the full header. -------------------------------------------------------------------- | Combined, preprocessed C code size of header, without line markers, | with comments stripped: ------------------------- before: | #include | LOC: 7,078 | headers: 172 after: | #include | LOC: 812 | headers: 38 Remove it and add it to the places that need it. Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 1cffa34740b0..969e7dba6358 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -33,7 +33,6 @@ #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include #include /* USB 3.2 SuperSpeed Plus phy signaling rate generation and lane count */ @@ -45,6 +44,8 @@ enum usb_ssp_rate { USB_SSP_GEN_2x2, }; +struct device; + extern const char *usb_ep_type_string(int ep_type); extern const char *usb_speed_string(enum usb_device_speed speed); extern enum usb_device_speed usb_get_maximum_speed(struct device *dev); -- cgit v1.3-18-gd494 From 945c37ed564770c78dfe6b9f08bed57a1b4e60ef Mon Sep 17 00:00:00 2001 From: Linyu Yuan Date: Mon, 10 Jan 2022 20:43:28 +0800 Subject: usb: roles: fix include/linux/usb/role.h compile issue when CONFIG_USB_ROLE_SWITCH is not defined, add usb_role_switch_find_by_fwnode() definition which return NULL. Fixes: c6919d5e0cd1 ("usb: roles: Add usb_role_switch_find_by_fwnode()") Signed-off-by: Linyu Yuan Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/role.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/role.h b/include/linux/usb/role.h index 031f148ab373..b5deafd91f67 100644 --- a/include/linux/usb/role.h +++ b/include/linux/usb/role.h @@ -91,6 +91,12 @@ fwnode_usb_role_switch_get(struct fwnode_handle *node) static inline void usb_role_switch_put(struct usb_role_switch *sw) { } +static inline struct usb_role_switch * +usb_role_switch_find_by_fwnode(const struct fwnode_handle *fwnode) +{ + return NULL; +} + static inline struct usb_role_switch * usb_role_switch_register(struct device *parent, const struct usb_role_switch_desc *desc) -- cgit v1.3-18-gd494