From 607ca46e97a1b6594b29647d98a32d545c24bdff Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 13 Oct 2012 10:46:48 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/Kbuild | 379 ----- include/linux/a.out.h | 196 +-- include/linux/acct.h | 108 +- include/linux/adb.h | 39 +- include/linux/adfs_fs.h | 42 +- include/linux/affs_hardblocks.h | 68 - include/linux/agpgart.h | 86 +- include/linux/aio_abi.h | 111 -- include/linux/apm_bios.h | 125 +- include/linux/arcfb.h | 8 - include/linux/atalk.h | 43 +- include/linux/atm.h | 238 +-- include/linux/atm_eni.h | 23 - include/linux/atm_he.h | 20 - include/linux/atm_idt77105.h | 28 - include/linux/atm_nicstar.h | 53 - include/linux/atm_tcp.h | 54 +- include/linux/atm_zatm.h | 52 - include/linux/atmapi.h | 29 - include/linux/atmarp.h | 41 - include/linux/atmbr2684.h | 117 -- include/linux/atmclip.h | 21 - include/linux/atmdev.h | 213 +-- include/linux/atmioc.h | 41 - include/linux/atmlec.h | 91 -- include/linux/atmmpc.h | 126 -- include/linux/atmppp.h | 24 - include/linux/atmsap.h | 162 -- include/linux/atmsvc.h | 55 - include/linux/audit.h | 381 +---- include/linux/auto_fs.h | 68 +- include/linux/auto_fs4.h | 164 -- include/linux/auxvec.h | 33 +- include/linux/ax25.h | 116 -- include/linux/b1lli.h | 73 - include/linux/baycom.h | 39 - include/linux/bfs_fs.h | 81 - include/linux/binfmts.h | 19 +- include/linux/blkpg.h | 59 - include/linux/blktrace_api.h | 142 +- include/linux/bpqether.h | 41 - include/linux/bsg.h | 63 +- include/linux/can.h | 162 -- include/linux/capability.h | 346 +--- include/linux/capi.h | 133 -- include/linux/cciss_defs.h | 130 -- include/linux/cciss_ioctl.h | 86 +- include/linux/cdrom.h | 902 +---------- include/linux/cgroupstats.h | 71 - include/linux/chio.h | 168 -- include/linux/cm4000_cs.h | 60 +- include/linux/cn_proc.h | 103 +- include/linux/coda.h | 680 +------- include/linux/coda_psdev.h | 26 +- include/linux/coff.h | 351 ---- include/linux/connector.h | 56 +- include/linux/const.h | 24 - include/linux/cramfs_fs.h | 86 +- include/linux/cuda.h | 25 +- include/linux/cyclades.h | 426 +---- include/linux/cycx_cfm.h | 101 -- include/linux/dcbnl.h | 684 -------- include/linux/dccp.h | 236 +-- include/linux/dlm.h | 62 +- include/linux/dlm_device.h | 108 -- include/linux/dlm_netlink.h | 58 - include/linux/dlm_plock.h | 37 +- include/linux/dlmconstants.h | 163 -- include/linux/dm-ioctl.h | 339 ---- include/linux/dm-log-userspace.h | 416 ----- include/linux/dn.h | 146 -- include/linux/dqblk_xfs.h | 166 -- include/linux/edd.h | 158 +- include/linux/efs_fs_sb.h | 62 - include/linux/elf-em.h | 56 - include/linux/elf-fdpic.h | 70 - include/linux/elf.h | 414 +---- include/linux/elfcore.h | 102 +- include/linux/errno.h | 5 +- include/linux/errqueue.h | 25 +- include/linux/ethtool.h | 1076 +------------ include/linux/eventpoll.h | 53 +- include/linux/fadvise.h | 21 - include/linux/falloc.h | 7 +- include/linux/fanotify.h | 114 +- include/linux/fb.h | 403 +---- include/linux/fcntl.h | 50 +- include/linux/fd.h | 380 +---- include/linux/fdreg.h | 137 -- include/linux/fib_rules.h | 72 - include/linux/fiemap.h | 68 - include/linux/filter.h | 133 +- include/linux/firewire-cdev.h | 1039 ------------ include/linux/firewire-constants.h | 92 -- include/linux/flat.h | 50 +- include/linux/fs.h | 333 +--- include/linux/fsl_hypervisor.h | 180 +-- include/linux/fuse.h | 677 -------- include/linux/futex.h | 150 +- include/linux/gameport.h | 26 +- include/linux/gen_stats.h | 67 - include/linux/genetlink.h | 82 +- include/linux/gfs2_ondisk.h | 464 ------ include/linux/gigaset_dev.h | 38 - include/linux/hdlc.h | 13 +- include/linux/hdlcdrv.h | 104 +- include/linux/hdreg.h | 658 -------- include/linux/hid.h | 46 +- include/linux/hiddev.h | 190 +-- include/linux/hidraw.h | 40 +- include/linux/hpet.h | 23 +- include/linux/hysdn_if.h | 33 - include/linux/i2c-dev.h | 49 +- include/linux/i2c.h | 125 +- include/linux/i2o-dev.h | 421 ----- include/linux/i8k.h | 46 - include/linux/icmp.h | 80 +- include/linux/icmpv6.h | 165 +- include/linux/if.h | 235 --- include/linux/if_addr.h | 61 - include/linux/if_addrlabel.h | 32 - include/linux/if_alg.h | 40 - include/linux/if_arcnet.h | 132 -- include/linux/if_arp.h | 136 +- include/linux/if_bonding.h | 128 -- include/linux/if_bridge.h | 89 +- include/linux/if_cablemodem.h | 22 - include/linux/if_eql.h | 36 +- include/linux/if_ether.h | 115 +- include/linux/if_fc.h | 51 - include/linux/if_fddi.h | 80 +- include/linux/if_frad.h | 98 +- include/linux/if_hippi.h | 153 -- include/linux/if_infiniband.h | 29 - include/linux/if_link.h | 427 +---- include/linux/if_ltalk.h | 7 +- include/linux/if_packet.h | 272 ---- include/linux/if_phonet.h | 7 +- include/linux/if_plip.h | 27 - include/linux/if_ppp.h | 1 - include/linux/if_pppol2tp.h | 89 +- include/linux/if_pppox.h | 143 +- include/linux/if_slip.h | 30 - include/linux/if_team.h | 97 +- include/linux/if_tun.h | 78 +- include/linux/if_tunnel.h | 94 +- include/linux/if_vlan.h | 51 +- include/linux/if_x25.h | 26 - include/linux/igmp.h | 113 +- include/linux/in.h | 235 +-- include/linux/in6.h | 258 +-- include/linux/in_route.h | 32 - include/linux/inet_diag.h | 134 +- include/linux/inotify.h | 69 +- include/linux/input.h | 1151 +------------- include/linux/ioctl.h | 7 - include/linux/ip.h | 119 +- include/linux/ip6_tunnel.h | 51 - include/linux/ip_vs.h | 434 ----- include/linux/ipc.h | 80 +- include/linux/ipmi.h | 422 +---- include/linux/ipmi_msgdefs.h | 121 -- include/linux/ipsec.h | 47 - include/linux/ipv6.h | 166 +- include/linux/ipv6_route.h | 45 +- include/linux/ipx.h | 75 - include/linux/irda.h | 251 --- include/linux/irqnr.h | 8 +- include/linux/isdn.h | 130 +- include/linux/isdn_divertif.h | 18 +- include/linux/isdn_ppp.h | 55 +- include/linux/isdnif.h | 43 +- include/linux/iso_fs.h | 165 -- include/linux/ivtv.h | 73 - include/linux/ivtvfb.h | 37 - include/linux/ixjuser.h | 720 --------- include/linux/jffs2.h | 223 --- include/linux/joystick.h | 114 +- include/linux/kd.h | 181 +-- include/linux/kdev_t.h | 14 +- include/linux/kernel-page-flags.h | 34 +- include/linux/kernel.h | 12 +- include/linux/kernelcapi.h | 38 +- include/linux/kexec.h | 52 +- include/linux/keyboard.h | 441 +----- include/linux/keyctl.h | 60 - include/linux/kvm.h | 975 ------------ include/linux/kvm_para.h | 26 +- include/linux/l2tp.h | 172 +- include/linux/limits.h | 20 - include/linux/llc.h | 74 +- include/linux/loop.h | 91 +- include/linux/lp.h | 97 +- include/linux/magic.h | 72 - include/linux/major.h | 177 --- include/linux/map_to_7segment.h | 187 --- include/linux/matroxfb.h | 42 - include/linux/mdio.h | 287 +--- include/linux/media.h | 132 -- include/linux/mei.h | 110 -- include/linux/mempolicy.h | 63 +- include/linux/meye.h | 66 - include/linux/mii.h | 154 +- include/linux/minix_fs.h | 106 -- include/linux/mman.h | 12 +- include/linux/mmtimer.h | 56 - include/linux/mqueue.h | 53 - include/linux/mroute.h | 146 +- include/linux/mroute6.h | 138 +- include/linux/msdos_fs.h | 165 +- include/linux/msg.h | 74 +- include/linux/mtio.h | 208 --- include/linux/n_r3964.h | 56 +- include/linux/nbd.h | 63 +- include/linux/ncp.h | 201 --- include/linux/ncp_fs.h | 146 -- include/linux/ncp_mount.h | 71 - include/linux/ncp_no.h | 19 - include/linux/neighbour.h | 159 -- include/linux/net.h | 39 +- include/linux/net_dropmon.h | 64 - include/linux/net_tstamp.h | 113 -- include/linux/netdevice.h | 32 +- include/linux/netfilter.h | 72 +- include/linux/netfilter_arp.h | 19 - include/linux/netfilter_bridge.h | 27 +- include/linux/netfilter_decnet.h | 79 - include/linux/netfilter_ipv4.h | 80 +- include/linux/netfilter_ipv6.h | 75 +- include/linux/netlink.h | 152 +- include/linux/netrom.h | 36 - include/linux/nfc.h | 197 --- include/linux/nfs.h | 124 +- include/linux/nfs2.h | 67 - include/linux/nfs3.h | 92 +- include/linux/nfs4.h | 166 +- include/linux/nfs4_mount.h | 71 - include/linux/nfs_fs.h | 54 +- include/linux/nfs_idmap.h | 28 +- include/linux/nfs_mount.h | 77 - include/linux/nfsacl.h | 23 +- include/linux/nl80211.h | 3072 ------------------------------------ include/linux/nubus.h | 234 +-- include/linux/nvram.h | 14 +- include/linux/omap3isp.h | 646 -------- include/linux/omapfb.h | 198 +-- include/linux/oom.h | 10 +- include/linux/packet_diag.h | 72 - include/linux/param.h | 6 - include/linux/parport.h | 89 +- include/linux/patchkey.h | 24 +- include/linux/pci.h | 25 +- include/linux/pci_regs.h | 846 ---------- include/linux/perf_event.h | 600 +------ include/linux/personality.h | 71 +- include/linux/pfkeyv2.h | 370 ----- include/linux/pg.h | 63 - include/linux/phantom.h | 49 - include/linux/phonet.h | 162 +- include/linux/pkt_cls.h | 469 ------ include/linux/pkt_sched.h | 738 --------- include/linux/pktcdvd.h | 99 +- include/linux/pmu.h | 130 +- include/linux/poll.h | 6 +- include/linux/posix_types.h | 37 - include/linux/ppdev.h | 99 -- include/linux/ppp-comp.h | 86 +- include/linux/ppp-ioctl.h | 119 -- include/linux/ppp_defs.h | 141 +- include/linux/pps.h | 131 -- include/linux/prctl.h | 152 -- include/linux/ptp_clock.h | 84 - include/linux/ptrace.h | 88 +- include/linux/qnx4_fs.h | 88 -- include/linux/qnxtypes.h | 28 - include/linux/quota.h | 139 +- include/linux/radeonfb.h | 15 - include/linux/random.h | 43 +- include/linux/raw.h | 18 - include/linux/rds.h | 285 ---- include/linux/reboot.h | 38 +- include/linux/reiserfs_fs.h | 26 - include/linux/reiserfs_xattr.h | 24 - include/linux/resource.h | 78 +- include/linux/rfkill.h | 92 +- include/linux/romfs_fs.h | 59 - include/linux/rose.h | 90 -- include/linux/route.h | 69 - include/linux/rtc.h | 96 +- include/linux/rtnetlink.h | 611 +------ include/linux/scc.h | 169 +- include/linux/sched.h | 44 +- include/linux/screen_info.h | 72 +- include/linux/sdla.h | 93 +- include/linux/seccomp.h | 45 +- include/linux/securebits.h | 51 +- include/linux/selinux_netlink.h | 50 - include/linux/sem.h | 79 +- include/linux/serial.h | 119 +- include/linux/serial_core.h | 199 +-- include/linux/serial_reg.h | 371 ----- include/linux/serio.h | 76 +- include/linux/shm.h | 81 +- include/linux/signal.h | 7 +- include/linux/signalfd.h | 44 +- include/linux/snmp.h | 284 ---- include/linux/sock_diag.h | 24 +- include/linux/socket.h | 20 +- include/linux/sockios.h | 148 -- include/linux/som.h | 154 -- include/linux/sonet.h | 58 +- include/linux/sonypi.h | 110 +- include/linux/sound.h | 29 +- include/linux/soundcard.h | 1261 +-------------- include/linux/stat.h | 46 +- include/linux/stddef.h | 5 +- include/linux/string.h | 7 +- include/linux/suspend_ioctls.h | 33 - include/linux/swab.h | 280 +--- include/linux/synclink.h | 288 +--- include/linux/sysctl.h | 911 +---------- include/linux/sysinfo.h | 24 - include/linux/taskstats.h | 213 --- include/linux/tcp.h | 208 +-- include/linux/tcp_metrics.h | 54 - include/linux/telephony.h | 262 --- include/linux/termios.h | 22 - include/linux/time.h | 72 +- include/linux/times.h | 13 - include/linux/timex.h | 113 +- include/linux/tiocl.h | 39 - include/linux/tipc.h | 209 --- include/linux/tipc_config.h | 395 ----- include/linux/toshiba.h | 17 +- include/linux/tty.h | 37 +- include/linux/tty_flags.h | 78 - include/linux/types.h | 50 +- include/linux/udf_fs_i.h | 21 - include/linux/udp.h | 22 +- include/linux/uhid.h | 104 -- include/linux/uinput.h | 109 +- include/linux/uio.h | 24 +- include/linux/ultrasound.h | 103 -- include/linux/un.h | 13 - include/linux/unistd.h | 9 - include/linux/unix_diag.h | 54 - include/linux/usbdevice_fs.h | 151 +- include/linux/utime.h | 11 - include/linux/utsname.h | 33 +- include/linux/uuid.h | 37 +- include/linux/uvcvideo.h | 70 - include/linux/v4l2-common.h | 71 - include/linux/v4l2-controls.h | 803 ---------- include/linux/v4l2-dv-timings.h | 816 ---------- include/linux/v4l2-mediabus.h | 119 -- include/linux/v4l2-subdev.h | 180 --- include/linux/veth.h | 12 - include/linux/vfio.h | 357 +---- include/linux/vhost.h | 130 -- include/linux/videodev2.h | 1940 +---------------------- include/linux/virtio_9p.h | 44 - include/linux/virtio_balloon.h | 59 - include/linux/virtio_blk.h | 130 -- include/linux/virtio_config.h | 53 +- include/linux/virtio_console.h | 45 +- include/linux/virtio_ids.h | 41 - include/linux/virtio_net.h | 169 -- include/linux/virtio_pci.h | 95 -- include/linux/virtio_ring.h | 163 +- include/linux/virtio_rng.h | 8 - include/linux/vt.h | 88 +- include/linux/wait.h | 20 +- include/linux/wanrouter.h | 405 +---- include/linux/watchdog.h | 49 +- include/linux/wimax.h | 239 --- include/linux/wireless.h | 1120 +------------ include/linux/x25.h | 152 -- include/linux/xattr.h | 54 +- include/linux/xfrm.h | 506 ------ 379 files changed, 250 insertions(+), 60011 deletions(-) delete mode 100644 include/linux/affs_hardblocks.h delete mode 100644 include/linux/aio_abi.h delete mode 100644 include/linux/arcfb.h delete mode 100644 include/linux/atm_eni.h delete mode 100644 include/linux/atm_he.h delete mode 100644 include/linux/atm_idt77105.h delete mode 100644 include/linux/atm_nicstar.h delete mode 100644 include/linux/atm_zatm.h delete mode 100644 include/linux/atmapi.h delete mode 100644 include/linux/atmarp.h delete mode 100644 include/linux/atmbr2684.h delete mode 100644 include/linux/atmclip.h delete mode 100644 include/linux/atmioc.h delete mode 100644 include/linux/atmlec.h delete mode 100644 include/linux/atmmpc.h delete mode 100644 include/linux/atmppp.h delete mode 100644 include/linux/atmsap.h delete mode 100644 include/linux/atmsvc.h delete mode 100644 include/linux/auto_fs4.h delete mode 100644 include/linux/ax25.h delete mode 100644 include/linux/b1lli.h delete mode 100644 include/linux/baycom.h delete mode 100644 include/linux/bfs_fs.h delete mode 100644 include/linux/blkpg.h delete mode 100644 include/linux/bpqether.h delete mode 100644 include/linux/can.h delete mode 100644 include/linux/capi.h delete mode 100644 include/linux/cciss_defs.h delete mode 100644 include/linux/cgroupstats.h delete mode 100644 include/linux/chio.h delete mode 100644 include/linux/coff.h delete mode 100644 include/linux/const.h delete mode 100644 include/linux/cycx_cfm.h delete mode 100644 include/linux/dcbnl.h delete mode 100644 include/linux/dlm_device.h delete mode 100644 include/linux/dlm_netlink.h delete mode 100644 include/linux/dlmconstants.h delete mode 100644 include/linux/dm-ioctl.h delete mode 100644 include/linux/dm-log-userspace.h delete mode 100644 include/linux/dn.h delete mode 100644 include/linux/dqblk_xfs.h delete mode 100644 include/linux/efs_fs_sb.h delete mode 100644 include/linux/elf-em.h delete mode 100644 include/linux/elf-fdpic.h delete mode 100644 include/linux/fadvise.h delete mode 100644 include/linux/fdreg.h delete mode 100644 include/linux/fib_rules.h delete mode 100644 include/linux/fiemap.h delete mode 100644 include/linux/firewire-cdev.h delete mode 100644 include/linux/firewire-constants.h delete mode 100644 include/linux/fuse.h delete mode 100644 include/linux/gen_stats.h delete mode 100644 include/linux/gfs2_ondisk.h delete mode 100644 include/linux/gigaset_dev.h delete mode 100644 include/linux/hdreg.h delete mode 100644 include/linux/hysdn_if.h delete mode 100644 include/linux/i2o-dev.h delete mode 100644 include/linux/i8k.h delete mode 100644 include/linux/if.h delete mode 100644 include/linux/if_addr.h delete mode 100644 include/linux/if_addrlabel.h delete mode 100644 include/linux/if_alg.h delete mode 100644 include/linux/if_arcnet.h delete mode 100644 include/linux/if_bonding.h delete mode 100644 include/linux/if_cablemodem.h delete mode 100644 include/linux/if_fc.h delete mode 100644 include/linux/if_hippi.h delete mode 100644 include/linux/if_infiniband.h delete mode 100644 include/linux/if_packet.h delete mode 100644 include/linux/if_plip.h delete mode 100644 include/linux/if_ppp.h delete mode 100644 include/linux/if_slip.h delete mode 100644 include/linux/if_x25.h delete mode 100644 include/linux/in_route.h delete mode 100644 include/linux/ioctl.h delete mode 100644 include/linux/ip6_tunnel.h delete mode 100644 include/linux/ip_vs.h delete mode 100644 include/linux/ipmi_msgdefs.h delete mode 100644 include/linux/ipsec.h delete mode 100644 include/linux/ipx.h delete mode 100644 include/linux/irda.h delete mode 100644 include/linux/iso_fs.h delete mode 100644 include/linux/ivtv.h delete mode 100644 include/linux/ivtvfb.h delete mode 100644 include/linux/ixjuser.h delete mode 100644 include/linux/jffs2.h delete mode 100644 include/linux/keyctl.h delete mode 100644 include/linux/kvm.h delete mode 100644 include/linux/limits.h delete mode 100644 include/linux/magic.h delete mode 100644 include/linux/major.h delete mode 100644 include/linux/map_to_7segment.h delete mode 100644 include/linux/matroxfb.h delete mode 100644 include/linux/media.h delete mode 100644 include/linux/mei.h delete mode 100644 include/linux/meye.h delete mode 100644 include/linux/minix_fs.h delete mode 100644 include/linux/mmtimer.h delete mode 100644 include/linux/mqueue.h delete mode 100644 include/linux/mtio.h delete mode 100644 include/linux/ncp.h delete mode 100644 include/linux/ncp_fs.h delete mode 100644 include/linux/ncp_mount.h delete mode 100644 include/linux/ncp_no.h delete mode 100644 include/linux/neighbour.h delete mode 100644 include/linux/net_dropmon.h delete mode 100644 include/linux/net_tstamp.h delete mode 100644 include/linux/netfilter_arp.h delete mode 100644 include/linux/netfilter_decnet.h delete mode 100644 include/linux/netrom.h delete mode 100644 include/linux/nfc.h delete mode 100644 include/linux/nfs2.h delete mode 100644 include/linux/nfs4_mount.h delete mode 100644 include/linux/nfs_mount.h delete mode 100644 include/linux/nl80211.h delete mode 100644 include/linux/omap3isp.h delete mode 100644 include/linux/packet_diag.h delete mode 100644 include/linux/param.h delete mode 100644 include/linux/pci_regs.h delete mode 100644 include/linux/pfkeyv2.h delete mode 100644 include/linux/pg.h delete mode 100644 include/linux/phantom.h delete mode 100644 include/linux/pkt_cls.h delete mode 100644 include/linux/pkt_sched.h delete mode 100644 include/linux/posix_types.h delete mode 100644 include/linux/ppdev.h delete mode 100644 include/linux/ppp-ioctl.h delete mode 100644 include/linux/pps.h delete mode 100644 include/linux/prctl.h delete mode 100644 include/linux/ptp_clock.h delete mode 100644 include/linux/qnx4_fs.h delete mode 100644 include/linux/qnxtypes.h delete mode 100644 include/linux/radeonfb.h delete mode 100644 include/linux/raw.h delete mode 100644 include/linux/rds.h delete mode 100644 include/linux/reiserfs_fs.h delete mode 100644 include/linux/reiserfs_xattr.h delete mode 100644 include/linux/romfs_fs.h delete mode 100644 include/linux/rose.h delete mode 100644 include/linux/route.h delete mode 100644 include/linux/selinux_netlink.h delete mode 100644 include/linux/serial_reg.h delete mode 100644 include/linux/snmp.h delete mode 100644 include/linux/sockios.h delete mode 100644 include/linux/som.h delete mode 100644 include/linux/suspend_ioctls.h delete mode 100644 include/linux/sysinfo.h delete mode 100644 include/linux/taskstats.h delete mode 100644 include/linux/tcp_metrics.h delete mode 100644 include/linux/telephony.h delete mode 100644 include/linux/termios.h delete mode 100644 include/linux/times.h delete mode 100644 include/linux/tiocl.h delete mode 100644 include/linux/tipc.h delete mode 100644 include/linux/tipc_config.h delete mode 100644 include/linux/tty_flags.h delete mode 100644 include/linux/udf_fs_i.h delete mode 100644 include/linux/uhid.h delete mode 100644 include/linux/ultrasound.h delete mode 100644 include/linux/un.h delete mode 100644 include/linux/unistd.h delete mode 100644 include/linux/unix_diag.h delete mode 100644 include/linux/utime.h delete mode 100644 include/linux/uvcvideo.h delete mode 100644 include/linux/v4l2-common.h delete mode 100644 include/linux/v4l2-controls.h delete mode 100644 include/linux/v4l2-dv-timings.h delete mode 100644 include/linux/v4l2-mediabus.h delete mode 100644 include/linux/v4l2-subdev.h delete mode 100644 include/linux/veth.h delete mode 100644 include/linux/vhost.h delete mode 100644 include/linux/virtio_9p.h delete mode 100644 include/linux/virtio_balloon.h delete mode 100644 include/linux/virtio_blk.h delete mode 100644 include/linux/virtio_ids.h delete mode 100644 include/linux/virtio_net.h delete mode 100644 include/linux/virtio_pci.h delete mode 100644 include/linux/virtio_rng.h delete mode 100644 include/linux/wimax.h delete mode 100644 include/linux/x25.h delete mode 100644 include/linux/xfrm.h (limited to 'include/linux') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index e2a1346514a6..5b57367e28db 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -22,389 +22,10 @@ header-y += wimax/ ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -header-y += a.out.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -header-y += kvm.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -header-y += kvm_para.h endif - -header-y += acct.h -header-y += adb.h -header-y += adfs_fs.h -header-y += affs_hardblocks.h -header-y += agpgart.h -header-y += aio_abi.h -header-y += apm_bios.h -header-y += arcfb.h -header-y += atalk.h -header-y += atm.h -header-y += atm_eni.h -header-y += atm_he.h -header-y += atm_idt77105.h -header-y += atm_nicstar.h -header-y += atm_tcp.h -header-y += atm_zatm.h -header-y += atmapi.h -header-y += atmarp.h -header-y += atmbr2684.h -header-y += atmclip.h -header-y += atmdev.h -header-y += atmioc.h -header-y += atmlec.h -header-y += atmmpc.h -header-y += atmppp.h -header-y += atmsap.h -header-y += atmsvc.h -header-y += audit.h -header-y += auto_fs.h -header-y += auto_fs4.h -header-y += auxvec.h -header-y += ax25.h -header-y += b1lli.h -header-y += baycom.h -header-y += bfs_fs.h -header-y += binfmts.h -header-y += blkpg.h -header-y += blktrace_api.h -header-y += bpqether.h -header-y += bsg.h -header-y += can.h -header-y += capability.h -header-y += capi.h -header-y += cciss_defs.h -header-y += cciss_ioctl.h -header-y += cdrom.h -header-y += cgroupstats.h -header-y += chio.h -header-y += cm4000_cs.h -header-y += cn_proc.h -header-y += coda.h -header-y += coda_psdev.h -header-y += coff.h -header-y += connector.h -header-y += const.h -header-y += cramfs_fs.h -header-y += cuda.h -header-y += cyclades.h -header-y += cycx_cfm.h -header-y += dcbnl.h -header-y += dccp.h -header-y += dlm.h -header-y += dlm_device.h -header-y += dlm_netlink.h -header-y += dlm_plock.h -header-y += dlmconstants.h -header-y += dm-ioctl.h -header-y += dm-log-userspace.h -header-y += dn.h -header-y += dqblk_xfs.h -header-y += edd.h -header-y += efs_fs_sb.h -header-y += elf-em.h -header-y += elf-fdpic.h -header-y += elf.h -header-y += elfcore.h -header-y += errno.h -header-y += errqueue.h -header-y += ethtool.h -header-y += eventpoll.h -header-y += fadvise.h -header-y += falloc.h -header-y += fanotify.h -header-y += fb.h -header-y += fcntl.h -header-y += fd.h -header-y += fdreg.h -header-y += fib_rules.h -header-y += fiemap.h -header-y += filter.h -header-y += firewire-cdev.h -header-y += firewire-constants.h -header-y += flat.h -header-y += fs.h -header-y += fsl_hypervisor.h -header-y += fuse.h -header-y += futex.h -header-y += gameport.h -header-y += gen_stats.h -header-y += genetlink.h -header-y += gfs2_ondisk.h -header-y += gigaset_dev.h -header-y += hdlc.h -header-y += hdlcdrv.h -header-y += hdreg.h -header-y += hid.h -header-y += hiddev.h -header-y += hidraw.h -header-y += hpet.h -header-y += hysdn_if.h -header-y += i2c-dev.h -header-y += i2c.h -header-y += i2o-dev.h -header-y += i8k.h -header-y += icmp.h -header-y += icmpv6.h -header-y += if.h -header-y += if_addr.h -header-y += if_addrlabel.h -header-y += if_alg.h -header-y += if_arcnet.h -header-y += if_arp.h -header-y += if_bonding.h -header-y += if_bridge.h -header-y += if_cablemodem.h -header-y += if_eql.h -header-y += if_ether.h -header-y += if_fc.h -header-y += if_fddi.h -header-y += if_frad.h -header-y += if_hippi.h -header-y += if_infiniband.h -header-y += if_link.h -header-y += if_ltalk.h -header-y += if_packet.h -header-y += if_phonet.h -header-y += if_plip.h -header-y += if_ppp.h -header-y += if_pppol2tp.h -header-y += if_pppox.h -header-y += if_slip.h -header-y += if_team.h -header-y += if_tun.h -header-y += if_tunnel.h -header-y += if_vlan.h -header-y += if_x25.h -header-y += igmp.h -header-y += in.h -header-y += in6.h -header-y += in_route.h -header-y += sock_diag.h -header-y += inet_diag.h -header-y += unix_diag.h -header-y += packet_diag.h -header-y += inotify.h -header-y += input.h -header-y += ioctl.h -header-y += ip.h -header-y += ip6_tunnel.h -header-y += ip_vs.h -header-y += ipc.h -header-y += ipmi.h -header-y += ipmi_msgdefs.h -header-y += ipsec.h -header-y += ipv6.h -header-y += ipv6_route.h -header-y += ipx.h -header-y += irda.h -header-y += irqnr.h -header-y += isdn.h -header-y += isdn_divertif.h -header-y += isdn_ppp.h -header-y += isdnif.h -header-y += iso_fs.h -header-y += ivtv.h -header-y += ivtvfb.h -header-y += ixjuser.h -header-y += jffs2.h -header-y += joystick.h -header-y += kd.h -header-y += kdev_t.h -header-y += kernel.h -header-y += kernelcapi.h -header-y += kernel-page-flags.h -header-y += kexec.h -header-y += keyboard.h -header-y += keyctl.h -header-y += l2tp.h -header-y += limits.h -header-y += llc.h -header-y += loop.h -header-y += lp.h -header-y += magic.h -header-y += major.h -header-y += map_to_7segment.h -header-y += matroxfb.h -header-y += mdio.h -header-y += media.h -header-y += mei.h -header-y += mempolicy.h -header-y += meye.h -header-y += mii.h -header-y += minix_fs.h -header-y += mman.h -header-y += mmtimer.h -header-y += mqueue.h -header-y += mroute.h -header-y += mroute6.h -header-y += msdos_fs.h -header-y += msg.h -header-y += mtio.h -header-y += n_r3964.h -header-y += nbd.h -header-y += ncp.h -header-y += ncp_fs.h -header-y += ncp_mount.h -header-y += ncp_no.h -header-y += neighbour.h -header-y += net.h -header-y += net_dropmon.h -header-y += net_tstamp.h -header-y += netdevice.h -header-y += netfilter.h -header-y += netfilter_arp.h -header-y += netfilter_bridge.h -header-y += netfilter_decnet.h -header-y += netfilter_ipv4.h -header-y += netfilter_ipv6.h -header-y += netlink.h -header-y += netrom.h -header-y += nfc.h -header-y += nfs.h -header-y += nfs2.h -header-y += nfs3.h -header-y += nfs4.h -header-y += nfs4_mount.h -header-y += nfs_fs.h -header-y += nfs_idmap.h -header-y += nfs_mount.h -header-y += nfsacl.h -header-y += nl80211.h -header-y += nubus.h -header-y += nvram.h -header-y += omap3isp.h -header-y += omapfb.h -header-y += oom.h -header-y += param.h -header-y += parport.h -header-y += patchkey.h -header-y += pci.h -header-y += pci_regs.h -header-y += perf_event.h -header-y += personality.h -header-y += pfkeyv2.h -header-y += pg.h -header-y += phantom.h -header-y += phonet.h -header-y += pkt_cls.h -header-y += pkt_sched.h -header-y += pktcdvd.h -header-y += pmu.h -header-y += poll.h -header-y += posix_types.h -header-y += ppdev.h -header-y += ppp-comp.h -header-y += ppp-ioctl.h -header-y += ppp_defs.h -header-y += pps.h -header-y += prctl.h -header-y += ptp_clock.h -header-y += ptrace.h -header-y += qnx4_fs.h -header-y += qnxtypes.h -header-y += quota.h -header-y += radeonfb.h -header-y += random.h -header-y += raw.h -header-y += rds.h -header-y += reboot.h -header-y += reiserfs_fs.h -header-y += reiserfs_xattr.h -header-y += resource.h -header-y += rfkill.h -header-y += romfs_fs.h -header-y += rose.h -header-y += route.h -header-y += rtc.h -header-y += rtnetlink.h -header-y += scc.h -header-y += sched.h -header-y += screen_info.h -header-y += sdla.h -header-y += seccomp.h -header-y += securebits.h -header-y += selinux_netlink.h -header-y += sem.h -header-y += serial.h -header-y += serial_core.h -header-y += serial_reg.h -header-y += serio.h -header-y += shm.h -header-y += signal.h -header-y += signalfd.h -header-y += snmp.h -header-y += socket.h -header-y += sockios.h -header-y += som.h -header-y += sonet.h -header-y += sonypi.h -header-y += sound.h -header-y += soundcard.h -header-y += stat.h -header-y += stddef.h -header-y += string.h -header-y += suspend_ioctls.h -header-y += swab.h -header-y += synclink.h -header-y += sysctl.h -header-y += sysinfo.h -header-y += taskstats.h -header-y += tcp.h -header-y += tcp_metrics.h -header-y += telephony.h -header-y += termios.h -header-y += time.h -header-y += times.h -header-y += timex.h -header-y += tiocl.h -header-y += tipc.h -header-y += tipc_config.h -header-y += toshiba.h -header-y += tty.h -header-y += tty_flags.h -header-y += types.h -header-y += udf_fs_i.h -header-y += udp.h -header-y += uhid.h -header-y += uinput.h -header-y += uio.h -header-y += ultrasound.h -header-y += un.h -header-y += unistd.h -header-y += usbdevice_fs.h -header-y += utime.h -header-y += utsname.h -header-y += uuid.h -header-y += uvcvideo.h -header-y += v4l2-common.h -header-y += v4l2-controls.h -header-y += v4l2-dv-timings.h -header-y += v4l2-mediabus.h -header-y += v4l2-subdev.h -header-y += veth.h -header-y += vfio.h -header-y += vhost.h -header-y += videodev2.h -header-y += virtio_9p.h -header-y += virtio_balloon.h -header-y += virtio_blk.h -header-y += virtio_config.h -header-y += virtio_console.h -header-y += virtio_ids.h -header-y += virtio_net.h -header-y += virtio_pci.h -header-y += virtio_ring.h -header-y += virtio_rng.h -header-y += vt.h -header-y += wait.h -header-y += wanrouter.h -header-y += watchdog.h -header-y += wimax.h -header-y += wireless.h -header-y += x25.h -header-y += xattr.h -header-y += xfrm.h diff --git a/include/linux/a.out.h b/include/linux/a.out.h index e86dfca44589..220f14338895 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,278 +1,84 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#define __GNU_EXEC_MACROS__ - -#ifndef __STRUCT_EXEC_OVERRIDE__ - -#include - -#endif /* __STRUCT_EXEC_OVERRIDE__ */ +#include #ifndef __ASSEMBLY__ - -/* these go in the N_MACHTYPE field */ -enum machine_type { #if defined (M_OLDSUN2) - M__OLDSUN2 = M_OLDSUN2, #else - M_OLDSUN2 = 0, #endif #if defined (M_68010) - M__68010 = M_68010, #else - M_68010 = 1, #endif #if defined (M_68020) - M__68020 = M_68020, #else - M_68020 = 2, #endif #if defined (M_SPARC) - M__SPARC = M_SPARC, #else - M_SPARC = 3, #endif - /* skip a bunch so we don't run into any of sun's numbers */ - M_386 = 100, - M_MIPS1 = 151, /* MIPS R3000/R3000 binary */ - M_MIPS2 = 152 /* MIPS R6000/R4000 binary */ -}; - #if !defined (N_MAGIC) -#define N_MAGIC(exec) ((exec).a_info & 0xffff) #endif -#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) -#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) -#define N_SET_INFO(exec, magic, type, flags) \ - ((exec).a_info = ((magic) & 0xffff) \ - | (((int)(type) & 0xff) << 16) \ - | (((flags) & 0xff) << 24)) -#define N_SET_MAGIC(exec, magic) \ - ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) - -#define N_SET_MACHTYPE(exec, machtype) \ - ((exec).a_info = \ - ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) - -#define N_SET_FLAGS(exec, flags) \ - ((exec).a_info = \ - ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) - -/* Code indicating object file or impure executable. */ -#define OMAGIC 0407 -/* Code indicating pure executable. */ -#define NMAGIC 0410 -/* Code indicating demand-paged executable. */ -#define ZMAGIC 0413 -/* This indicates a demand-paged executable with the header in the text. - The first page is unmapped to help trap NULL pointer references */ -#define QMAGIC 0314 - -/* Code indicating core file. */ -#define CMAGIC 0421 - #if !defined (N_BADMAG) -#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC \ - && N_MAGIC(x) != QMAGIC) #endif - -#define _N_HDROFF(x) (1024 - sizeof (struct exec)) - #if !defined (N_TXTOFF) -#define N_TXTOFF(x) \ - (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \ - (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec))) #endif - #if !defined (N_DATOFF) -#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text) #endif - #if !defined (N_TRELOFF) -#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data) #endif - #if !defined (N_DRELOFF) -#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x)) #endif - #if !defined (N_SYMOFF) -#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x)) #endif - #if !defined (N_STROFF) -#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x)) #endif - -/* Address of text segment in memory after it is loaded. */ #if !defined (N_TXTADDR) -#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0) #endif - -/* Address of data segment in memory after it is loaded. - Note that it is up to you to define SEGMENT_SIZE - on machines not listed here. */ #if defined(vax) || defined(hp300) || defined(pyr) -#define SEGMENT_SIZE page_size #endif #ifdef sony -#define SEGMENT_SIZE 0x2000 #endif /* Sony. */ #ifdef is68k -#define SEGMENT_SIZE 0x20000 #endif #if defined(m68k) && defined(PORTAR) -#define PAGE_SIZE 0x400 -#define SEGMENT_SIZE PAGE_SIZE #endif - #ifdef linux -#ifdef __KERNEL__ #include -#else -#include -#endif #if defined(__i386__) || defined(__mc68000__) -#define SEGMENT_SIZE 1024 #else #ifndef SEGMENT_SIZE -#ifdef __KERNEL__ #define SEGMENT_SIZE PAGE_SIZE -#else -#define SEGMENT_SIZE getpagesize() -#endif #endif #endif #endif - -#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE) - -#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text) - #ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \ - : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) #endif - -/* Address of bss segment in memory after it is loaded. */ #if !defined (N_BSSADDR) -#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) #endif - #if !defined (N_NLIST_DECLARED) -struct nlist { - union { - char *n_name; - struct nlist *n_next; - long n_strx; - } n_un; - unsigned char n_type; - char n_other; - short n_desc; - unsigned long n_value; -}; #endif /* no N_NLIST_DECLARED. */ - #if !defined (N_UNDF) -#define N_UNDF 0 #endif #if !defined (N_ABS) -#define N_ABS 2 #endif #if !defined (N_TEXT) -#define N_TEXT 4 #endif #if !defined (N_DATA) -#define N_DATA 6 #endif #if !defined (N_BSS) -#define N_BSS 8 #endif #if !defined (N_FN) -#define N_FN 15 #endif - #if !defined (N_EXT) -#define N_EXT 1 #endif #if !defined (N_TYPE) -#define N_TYPE 036 #endif #if !defined (N_STAB) -#define N_STAB 0340 #endif - -/* The following type indicates the definition of a symbol as being - an indirect reference to another symbol. The other symbol - appears as an undefined reference, immediately following this symbol. - - Indirection is asymmetrical. The other symbol's value will be used - to satisfy requests for the indirect symbol, but not vice versa. - If the other symbol does not have a definition, libraries will - be searched to find a definition. */ -#define N_INDR 0xa - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - element's value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - #if !defined (N_RELOCATION_INFO_DECLARED) -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct relocation_info -{ - /* Address (within segment) to be relocated. */ - int r_address; - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in file's the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* Four bits that aren't used, but when writing an object file - it is desirable to clear them. */ #ifdef NS32K - unsigned r_bsr:1; - unsigned r_disp:1; - unsigned r_pad:2; #else - unsigned int r_pad:4; #endif -}; #endif /* no N_RELOCATION_INFO_DECLARED. */ - #endif /*__ASSEMBLY__ */ #endif /* __A_OUT_GNU_H__ */ diff --git a/include/linux/acct.h b/include/linux/acct.h index d537aa0ec414..4a5b7cb56079 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -11,109 +11,11 @@ * Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V. * */ - #ifndef _LINUX_ACCT_H #define _LINUX_ACCT_H -#include - -#include -#include - -/* - * comp_t is a 16-bit "floating" point number with a 3-bit base 8 - * exponent and a 13-bit fraction. - * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction - * (leading 1 not stored). - * See linux/kernel/acct.c for the specific encoding systems used. - */ - -typedef __u16 comp_t; -typedef __u32 comp2_t; - -/* - * accounting file record - * - * This structure contains all of the information written out to the - * process accounting file whenever a process exits. - */ +#include -#define ACCT_COMM 16 - -struct acct -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - /* for binary compatibility back until 2.0 */ - __u16 ac_uid16; /* LSB of Real User ID */ - __u16 ac_gid16; /* LSB of Real Group ID */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_btime; /* Process Creation Time */ - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_etime; /* Elapsed Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ -/* m68k had no padding here. */ -#if !defined(CONFIG_M68K) || !defined(__KERNEL__) - __u16 ac_ahz; /* AHZ */ -#endif - __u32 ac_exitcode; /* Exitcode */ - char ac_comm[ACCT_COMM + 1]; /* Command Name */ - __u8 ac_etime_hi; /* Elapsed Time MSB */ - __u16 ac_etime_lo; /* Elapsed Time LSB */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ -}; - -struct acct_v3 -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_exitcode; /* Exitcode */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ - __u32 ac_pid; /* Process ID */ - __u32 ac_ppid; /* Parent Process ID */ - __u32 ac_btime; /* Process Creation Time */ -#ifdef __KERNEL__ - __u32 ac_etime; /* Elapsed Time */ -#else - float ac_etime; /* Elapsed Time */ -#endif - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ - char ac_comm[ACCT_COMM]; /* Command Name */ -}; - -/* - * accounting flags - */ - /* bit set when the process ... */ -#define AFORK 0x01 /* ... executed fork, but did not exec */ -#define ASU 0x02 /* ... used super-user privileges */ -#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ -#define ACORE 0x08 /* ... dumped core */ -#define AXSIG 0x10 /* ... was killed by a signal */ - -#ifdef __BIG_ENDIAN -#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ -#else -#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ -#endif - -#ifdef __KERNEL__ #ifdef CONFIG_BSD_PROCESS_ACCT @@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t; typedef struct acct acct_t; #endif -#else -#define ACCT_VERSION 2 -#define AHZ (HZ) -#endif /* __KERNEL */ - -#ifdef __KERNEL__ #include /* * Yet another set of HZ to *HZ helper functions. @@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x) return x; } -#endif /* __KERNEL */ - #endif /* _LINUX_ACCT_H */ diff --git a/include/linux/adb.h b/include/linux/adb.h index 63bca502fa55..cde41300c7ad 100644 --- a/include/linux/adb.h +++ b/include/linux/adb.h @@ -4,43 +4,8 @@ #ifndef __ADB_H #define __ADB_H -/* ADB commands */ -#define ADB_BUSRESET 0 -#define ADB_FLUSH(id) (0x01 | ((id) << 4)) -#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4)) -#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) +#include -/* ADB default device IDs (upper 4 bits of ADB command byte) */ -#define ADB_DONGLE 1 /* "software execution control" devices */ -#define ADB_KEYBOARD 2 -#define ADB_MOUSE 3 -#define ADB_TABLET 4 -#define ADB_MODEM 5 -#define ADB_MISC 7 /* maybe a monitor */ - -#define ADB_RET_OK 0 -#define ADB_RET_TIMEOUT 3 - -/* The kind of ADB request. The controller may emulate some - or all of those CUDA/PMU packet kinds */ -#define ADB_PACKET 0 -#define CUDA_PACKET 1 -#define ERROR_PACKET 2 -#define TIMER_PACKET 3 -#define POWER_PACKET 4 -#define MACIIC_PACKET 5 -#define PMU_PACKET 6 -#define ADB_QUERY 7 - -/* ADB queries */ - -/* ADB_QUERY_GETDEVINFO - * Query ADB slot for device presence - * data[2] = id, rep[0] = orig addr, rep[1] = handler_id - */ -#define ADB_QUERY_GETDEVINFO 1 - -#ifdef __KERNEL__ struct adb_request { unsigned char data[32]; @@ -98,6 +63,4 @@ int adb_reset_bus(void); int adb_try_handler_change(int address, int new_id); int adb_get_infos(int address, int *original_address, int *handler_id); -#endif /* __KERNEL__ */ - #endif /* __ADB_H */ diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h index b19801f73890..0d991071a9d4 100644 --- a/include/linux/adfs_fs.h +++ b/include/linux/adfs_fs.h @@ -1,46 +1,8 @@ #ifndef _ADFS_FS_H #define _ADFS_FS_H -#include -#include +#include -/* - * Disc Record at disc address 0xc00 - */ -struct adfs_discrecord { - __u8 log2secsize; - __u8 secspertrack; - __u8 heads; - __u8 density; - __u8 idlen; - __u8 log2bpmb; - __u8 skew; - __u8 bootoption; - __u8 lowsector; - __u8 nzones; - __le16 zone_spare; - __le32 root; - __le32 disc_size; - __le16 disc_id; - __u8 disc_name[10]; - __le32 disc_type; - __le32 disc_size_high; - __u8 log2sharesize:4; - __u8 unused40:4; - __u8 big_flag:1; - __u8 unused41:1; - __u8 nzones_high; - __le32 format_version; - __le32 root_size; - __u8 unused52[60 - 52]; -}; - -#define ADFS_DISCRECORD (0xc00) -#define ADFS_DR_OFFSET (0x1c0) -#define ADFS_DR_SIZE 60 -#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3) - -#ifdef __KERNEL__ /* * Calculate the boot block checksum on an ADFS drive. Note that this will * appear to be correct if the sector contains all zeros, so also check that @@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr) return (result & 0xff) != ptr[511]; } #endif - -#endif diff --git a/include/linux/affs_hardblocks.h b/include/linux/affs_hardblocks.h deleted file mode 100644 index f1b948c1f592..000000000000 --- a/include/linux/affs_hardblocks.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef AFFS_HARDBLOCKS_H -#define AFFS_HARDBLOCKS_H - -#include - -/* Just the needed definitions for the RDB of an Amiga HD. */ - -struct RigidDiskBlock { - __u32 rdb_ID; - __be32 rdb_SummedLongs; - __s32 rdb_ChkSum; - __u32 rdb_HostID; - __be32 rdb_BlockBytes; - __u32 rdb_Flags; - __u32 rdb_BadBlockList; - __be32 rdb_PartitionList; - __u32 rdb_FileSysHeaderList; - __u32 rdb_DriveInit; - __u32 rdb_Reserved1[6]; - __u32 rdb_Cylinders; - __u32 rdb_Sectors; - __u32 rdb_Heads; - __u32 rdb_Interleave; - __u32 rdb_Park; - __u32 rdb_Reserved2[3]; - __u32 rdb_WritePreComp; - __u32 rdb_ReducedWrite; - __u32 rdb_StepRate; - __u32 rdb_Reserved3[5]; - __u32 rdb_RDBBlocksLo; - __u32 rdb_RDBBlocksHi; - __u32 rdb_LoCylinder; - __u32 rdb_HiCylinder; - __u32 rdb_CylBlocks; - __u32 rdb_AutoParkSeconds; - __u32 rdb_HighRDSKBlock; - __u32 rdb_Reserved4; - char rdb_DiskVendor[8]; - char rdb_DiskProduct[16]; - char rdb_DiskRevision[4]; - char rdb_ControllerVendor[8]; - char rdb_ControllerProduct[16]; - char rdb_ControllerRevision[4]; - __u32 rdb_Reserved5[10]; -}; - -#define IDNAME_RIGIDDISK 0x5244534B /* "RDSK" */ - -struct PartitionBlock { - __be32 pb_ID; - __be32 pb_SummedLongs; - __s32 pb_ChkSum; - __u32 pb_HostID; - __be32 pb_Next; - __u32 pb_Flags; - __u32 pb_Reserved1[2]; - __u32 pb_DevFlags; - __u8 pb_DriveName[32]; - __u32 pb_Reserved2[15]; - __be32 pb_Environment[17]; - __u32 pb_EReserved[15]; -}; - -#define IDNAME_PARTITION 0x50415254 /* "PART" */ - -#define RDB_ALLOCATION_LIMIT 16 - -#endif /* AFFS_HARDBLOCKS_H */ diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index f6778eceb8f4..c6b61ca97053 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -23,94 +23,12 @@ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ - #ifndef _AGP_H #define _AGP_H 1 -#define AGPIOC_BASE 'A' -#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*) -#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1) -#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2) -#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*) -#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*) -#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*) -#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*) -#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int) -#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*) -#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*) -#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10) - -#define AGP_DEVICE "/dev/agpgart" - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef __KERNEL__ -#include - -struct agp_version { - __u16 major; - __u16 minor; -}; - -typedef struct _agp_info { - struct agp_version version; /* version of the driver */ - __u32 bridge_id; /* bridge vendor/device */ - __u32 agp_mode; /* mode info of bridge */ - unsigned long aper_base;/* base of aperture */ - size_t aper_size; /* size of aperture */ - size_t pg_total; /* max pages (swap + system) */ - size_t pg_system; /* max pages (system) */ - size_t pg_used; /* current pages used */ -} agp_info; - -typedef struct _agp_setup { - __u32 agp_mode; /* mode info of bridge */ -} agp_setup; - -/* - * The "prot" down below needs still a "sleep" flag somehow ... - */ -typedef struct _agp_segment { - __kernel_off_t pg_start; /* starting page to populate */ - __kernel_size_t pg_count; /* number of pages */ - int prot; /* prot flags for mmap */ -} agp_segment; - -typedef struct _agp_region { - __kernel_pid_t pid; /* pid of process */ - __kernel_size_t seg_count; /* number of segments */ - struct _agp_segment *seg_list; -} agp_region; - -typedef struct _agp_allocate { - int key; /* tag of allocation */ - __kernel_size_t pg_count;/* number of pages */ - __u32 type; /* 0 == normal, other devspec */ - __u32 physical; /* device specific (some devices - * need a phys address of the - * actual page behind the gatt - * table) */ -} agp_allocate; - -typedef struct _agp_bind { - int key; /* tag of allocation */ - __kernel_off_t pg_start;/* starting page to populate */ -} agp_bind; - -typedef struct _agp_unbind { - int key; /* tag of allocation */ - __u32 priority; /* priority for paging out */ -} agp_unbind; - -#else /* __KERNEL__ */ #include #include +#include #define AGPGART_MINOR 175 @@ -209,6 +127,4 @@ struct agp_front_data { bool backend_acquired; }; -#endif /* __KERNEL__ */ - #endif /* _AGP_H */ diff --git a/include/linux/aio_abi.h b/include/linux/aio_abi.h deleted file mode 100644 index 86fa7a71336a..000000000000 --- a/include/linux/aio_abi.h +++ /dev/null @@ -1,111 +0,0 @@ -/* include/linux/aio_abi.h - * - * Copyright 2000,2001,2002 Red Hat. - * - * Written by Benjamin LaHaise - * - * Distribute under the terms of the GPLv2 (see ../../COPYING) or under - * the following terms. - * - * Permission to use, copy, modify, and distribute this software and its - * documentation is hereby granted, provided that the above copyright - * notice appears in all copies. This software is provided without any - * warranty, express or implied. Red Hat makes no representations about - * the suitability of this software for any purpose. - * - * IN NO EVENT SHALL RED HAT BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, - * SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF - * THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF RED HAT HAS BEEN ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * - * RED HAT DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND - * RED HAT HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, - * ENHANCEMENTS, OR MODIFICATIONS. - */ -#ifndef __LINUX__AIO_ABI_H -#define __LINUX__AIO_ABI_H - -#include -#include - -typedef __kernel_ulong_t aio_context_t; - -enum { - IOCB_CMD_PREAD = 0, - IOCB_CMD_PWRITE = 1, - IOCB_CMD_FSYNC = 2, - IOCB_CMD_FDSYNC = 3, - /* These two are experimental. - * IOCB_CMD_PREADX = 4, - * IOCB_CMD_POLL = 5, - */ - IOCB_CMD_NOOP = 6, - IOCB_CMD_PREADV = 7, - IOCB_CMD_PWRITEV = 8, -}; - -/* - * Valid flags for the "aio_flags" member of the "struct iocb". - * - * IOCB_FLAG_RESFD - Set if the "aio_resfd" member of the "struct iocb" - * is valid. - */ -#define IOCB_FLAG_RESFD (1 << 0) - -/* read() from /dev/aio returns these structures. */ -struct io_event { - __u64 data; /* the data field from the iocb */ - __u64 obj; /* what iocb this event came from */ - __s64 res; /* result code for this event */ - __s64 res2; /* secondary result */ -}; - -#if defined(__LITTLE_ENDIAN) -#define PADDED(x,y) x, y -#elif defined(__BIG_ENDIAN) -#define PADDED(x,y) y, x -#else -#error edit for your odd byteorder. -#endif - -/* - * we always use a 64bit off_t when communicating - * with userland. its up to libraries to do the - * proper padding and aio_error abstraction - */ - -struct iocb { - /* these are internal to the kernel/libc. */ - __u64 aio_data; /* data to be returned in event's data */ - __u32 PADDED(aio_key, aio_reserved1); - /* the kernel sets aio_key to the req # */ - - /* common fields */ - __u16 aio_lio_opcode; /* see IOCB_CMD_ above */ - __s16 aio_reqprio; - __u32 aio_fildes; - - __u64 aio_buf; - __u64 aio_nbytes; - __s64 aio_offset; - - /* extra parameters */ - __u64 aio_reserved2; /* TODO: use this for a (struct sigevent *) */ - - /* flags for the "struct iocb" */ - __u32 aio_flags; - - /* - * if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an - * eventfd to signal AIO readiness to - */ - __u32 aio_resfd; -}; /* 64 bytes */ - -#undef IFBIG -#undef IFLITTLE - -#endif /* __LINUX__AIO_ABI_H */ - diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h index 01a6244c9bc9..9c3a87184f48 100644 --- a/include/linux/apm_bios.h +++ b/include/linux/apm_bios.h @@ -1,6 +1,3 @@ -#ifndef _LINUX_APM_H -#define _LINUX_APM_H - /* * Include file for the interface to an APM BIOS * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) @@ -15,25 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. */ +#ifndef _LINUX_APM_H +#define _LINUX_APM_H -#include - -typedef unsigned short apm_event_t; -typedef unsigned short apm_eventinfo_t; - -struct apm_bios_info { - __u16 version; - __u16 cseg; - __u32 offset; - __u16 cseg_16; - __u16 dseg; - __u16 flags; - __u16 cseg_len; - __u16 cseg_16_len; - __u16 dseg_len; -}; +#include -#ifdef __KERNEL__ #define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8) #define APM_CS_16 (APM_CS + 8) @@ -110,111 +93,9 @@ struct apm_info { */ extern struct apm_info apm_info; -#endif /* __KERNEL__ */ - -/* - * Power states - */ -#define APM_STATE_READY 0x0000 -#define APM_STATE_STANDBY 0x0001 -#define APM_STATE_SUSPEND 0x0002 -#define APM_STATE_OFF 0x0003 -#define APM_STATE_BUSY 0x0004 -#define APM_STATE_REJECT 0x0005 -#define APM_STATE_OEM_SYS 0x0020 -#define APM_STATE_OEM_DEV 0x0040 - -#define APM_STATE_DISABLE 0x0000 -#define APM_STATE_ENABLE 0x0001 - -#define APM_STATE_DISENGAGE 0x0000 -#define APM_STATE_ENGAGE 0x0001 - -/* - * Events (results of Get PM Event) - */ -#define APM_SYS_STANDBY 0x0001 -#define APM_SYS_SUSPEND 0x0002 -#define APM_NORMAL_RESUME 0x0003 -#define APM_CRITICAL_RESUME 0x0004 -#define APM_LOW_BATTERY 0x0005 -#define APM_POWER_STATUS_CHANGE 0x0006 -#define APM_UPDATE_TIME 0x0007 -#define APM_CRITICAL_SUSPEND 0x0008 -#define APM_USER_STANDBY 0x0009 -#define APM_USER_SUSPEND 0x000a -#define APM_STANDBY_RESUME 0x000b -#define APM_CAPABILITY_CHANGE 0x000c - -/* - * Error codes - */ -#define APM_SUCCESS 0x00 -#define APM_DISABLED 0x01 -#define APM_CONNECTED 0x02 -#define APM_NOT_CONNECTED 0x03 -#define APM_16_CONNECTED 0x05 -#define APM_16_UNSUPPORTED 0x06 -#define APM_32_CONNECTED 0x07 -#define APM_32_UNSUPPORTED 0x08 -#define APM_BAD_DEVICE 0x09 -#define APM_BAD_PARAM 0x0a -#define APM_NOT_ENGAGED 0x0b -#define APM_BAD_FUNCTION 0x0c -#define APM_RESUME_DISABLED 0x0d -#define APM_NO_ERROR 0x53 -#define APM_BAD_STATE 0x60 -#define APM_NO_EVENTS 0x80 -#define APM_NOT_PRESENT 0x86 - -/* - * APM Device IDs - */ -#define APM_DEVICE_BIOS 0x0000 -#define APM_DEVICE_ALL 0x0001 -#define APM_DEVICE_DISPLAY 0x0100 -#define APM_DEVICE_STORAGE 0x0200 -#define APM_DEVICE_PARALLEL 0x0300 -#define APM_DEVICE_SERIAL 0x0400 -#define APM_DEVICE_NETWORK 0x0500 -#define APM_DEVICE_PCMCIA 0x0600 -#define APM_DEVICE_BATTERY 0x8000 -#define APM_DEVICE_OEM 0xe000 -#define APM_DEVICE_OLD_ALL 0xffff -#define APM_DEVICE_CLASS 0x00ff -#define APM_DEVICE_MASK 0xff00 - -#ifdef __KERNEL__ /* * This is the "All Devices" ID communicated to the BIOS */ #define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \ APM_DEVICE_ALL : APM_DEVICE_OLD_ALL) -#endif - -/* - * Battery status - */ -#define APM_MAX_BATTERIES 2 - -/* - * APM defined capability bit flags - */ -#define APM_CAP_GLOBAL_STANDBY 0x0001 -#define APM_CAP_GLOBAL_SUSPEND 0x0002 -#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */ -#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */ -#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */ -#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */ -#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */ -#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */ - -/* - * ioctl operations - */ -#include - -#define APM_IOC_STANDBY _IO('A', 1) -#define APM_IOC_SUSPEND _IO('A', 2) - #endif /* LINUX_APM_H */ diff --git a/include/linux/arcfb.h b/include/linux/arcfb.h deleted file mode 100644 index 721e7654daeb..000000000000 --- a/include/linux/arcfb.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __LINUX_ARCFB_H__ -#define __LINUX_ARCFB_H__ - -#define FBIO_WAITEVENT _IO('F', 0x88) -#define FBIO_GETCONTROL2 _IOR('F', 0x89, size_t) - -#endif - diff --git a/include/linux/atalk.h b/include/linux/atalk.h index f57c36881c48..73fd8b7e9534 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -1,49 +1,9 @@ #ifndef __LINUX_ATALK_H__ #define __LINUX_ATALK_H__ -#include -#include -#include - -/* - * AppleTalk networking structures - * - * The following are directly referenced from the University Of Michigan - * netatalk for compatibility reasons. - */ -#define ATPORT_FIRST 1 -#define ATPORT_RESERVED 128 -#define ATPORT_LAST 254 /* 254 is only legal on localtalk */ -#define ATADDR_ANYNET (__u16)0 -#define ATADDR_ANYNODE (__u8)0 -#define ATADDR_ANYPORT (__u8)0 -#define ATADDR_BCAST (__u8)255 -#define DDP_MAXSZ 587 -#define DDP_MAXHOPS 15 /* 4 bits of hop counter */ - -#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0) - -struct atalk_addr { - __be16 s_net; - __u8 s_node; -}; - -struct sockaddr_at { - __kernel_sa_family_t sat_family; - __u8 sat_port; - struct atalk_addr sat_addr; - char sat_zero[8]; -}; - -struct atalk_netrange { - __u8 nr_phase; - __be16 nr_firstnet; - __be16 nr_lastnet; -}; - -#ifdef __KERNEL__ #include +#include struct atalk_route { struct net_device *dev; @@ -205,5 +165,4 @@ extern void atalk_proc_exit(void); #define atalk_proc_exit() do { } while(0) #endif /* CONFIG_PROC_FS */ -#endif /* __KERNEL__ */ #endif /* __LINUX_ATALK_H__ */ diff --git a/include/linux/atm.h b/include/linux/atm.h index d3b292174aeb..30006c435951 100644 --- a/include/linux/atm.h +++ b/include/linux/atm.h @@ -1,242 +1,9 @@ /* atm.h - general ATM declarations */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -/* - * WARNING: User-space programs should not #include directly. - * Instead, #include - */ - #ifndef _LINUX_ATM_H #define _LINUX_ATM_H -/* - * BEGIN_xx and END_xx markers are used for automatic generation of - * documentation. Do not change them. - */ - -#include -#include -#include -#include -#include - - -/* general ATM constants */ -#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */ -#define ATM_CELL_PAYLOAD 48 /* ATM payload size */ -#define ATM_AAL0_SDU 52 /* AAL0 SDU size */ -#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */ -#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */ -#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */ -#define ATM_MAX_CDV 9999 /* maximum (default) CDV */ -#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */ - -#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */ -#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */ -#define ATM_MAX_VCI 65535 /* maximum VCI */ - - -/* "protcol" values for the socket system call */ -#define ATM_NO_AAL 0 /* AAL not specified */ -#define ATM_AAL0 13 /* "raw" ATM cells */ -#define ATM_AAL1 1 /* AAL1 (CBR) */ -#define ATM_AAL2 2 /* AAL2 (VBR) */ -#define ATM_AAL34 3 /* AAL3/4 (data) */ -#define ATM_AAL5 5 /* AAL5 (data) */ - -/* - * socket option name coding functions - * - * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the - * << 22 only reserves 9 bits for the level. On some architectures - * SOL_SOCKET is 0xFFFF, so that's a bit of a problem - */ - -#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \ - sizeof(t)) -#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF)) -#define __SO_NUMBER(c) (((c) >> 16) & 0x3f) -#define __SO_SIZE(c) ((c) & 0x3fff) - -/* - * ATM layer - */ - -#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int) - /* set CLP bit value - TODO */ -#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange) - /* connection identifier range; socket must be - bound or connected */ -#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos) - /* Quality of Service setting */ -#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap) - /* Service Access Point */ -#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc) - /* "PVC" address (also for SVCs); get only */ -#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int) - /* make this vc a p2mp */ - - -/* - * Note @@@: since the socket layers don't really distinguish the control and - * the data plane but generally seems to be data plane-centric, any layer is - * about equally wrong for the SAP. If you have a better idea about this, - * please speak up ... - */ - - -/* ATM cell header (for AAL0) */ - -/* BEGIN_CH */ -#define ATM_HDR_GFC_MASK 0xf0000000 -#define ATM_HDR_GFC_SHIFT 28 -#define ATM_HDR_VPI_MASK 0x0ff00000 -#define ATM_HDR_VPI_SHIFT 20 -#define ATM_HDR_VCI_MASK 0x000ffff0 -#define ATM_HDR_VCI_SHIFT 4 -#define ATM_HDR_PTI_MASK 0x0000000e -#define ATM_HDR_PTI_SHIFT 1 -#define ATM_HDR_CLP 0x00000001 -/* END_CH */ - - -/* PTI codings */ - -/* BEGIN_PTI */ -#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */ -#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */ -#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */ -#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */ -#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */ -#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */ -#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */ -#define ATM_PTI_RSV 7 /* reserved */ -/* END_PTI */ - - -/* - * The following items should stay in linux/atm.h, which should be linked to - * netatm/atm.h - */ - -/* Traffic description */ - -#define ATM_NONE 0 /* no traffic */ -#define ATM_UBR 1 -#define ATM_CBR 2 -#define ATM_VBR 3 -#define ATM_ABR 4 -#define ATM_ANYCLASS 5 /* compatible with everything */ - -#define ATM_MAX_PCR -1 /* maximum available PCR */ - -struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ - int pcr; /* desired PCR in cells per second */ - int min_pcr; /* minimum PCR in cells per second */ - int max_cdv; /* maximum CDV in microseconds */ - int max_sdu; /* maximum SDU in bytes */ - /* extra params for ABR */ - unsigned int icr; /* Initial Cell Rate (24-bit) */ - unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ - unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */ - unsigned int rif : 4; /* Rate Increment Factor (4-bit) */ - unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */ - unsigned int nrm_pres :1; /* nrm present bit */ - unsigned int trm_pres :1; /* rm present bit */ - unsigned int adtf_pres :1; /* adtf present bit */ - unsigned int cdf_pres :1; /* cdf present bit*/ - unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */ - unsigned int trm :3; /* Time between forward RM cells (3-bit) */ - unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ - unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ - unsigned int spare :9; /* spare bits */ -}; - -struct atm_qos { - struct atm_trafprm txtp; /* parameters in TX direction */ - struct atm_trafprm rxtp __ATM_API_ALIGN; - /* parameters in RX direction */ - unsigned char aal __ATM_API_ALIGN; -}; - -/* PVC addressing */ - -#define ATM_ITF_ANY -1 /* "magic" PVC address values */ -#define ATM_VPI_ANY -1 -#define ATM_VCI_ANY -1 -#define ATM_VPI_UNSPEC -2 -#define ATM_VCI_UNSPEC -2 - - -struct sockaddr_atmpvc { - unsigned short sap_family; /* address family, AF_ATMPVC */ - struct { /* PVC address */ - short itf; /* ATM interface */ - short vpi; /* VPI (only 8 bits at UNI) */ - int vci; /* VCI (only 16 bits at UNI) */ - } sap_addr __ATM_API_ALIGN; /* PVC address */ -}; - -/* SVC addressing */ - -#define ATM_ESA_LEN 20 /* ATM End System Address length */ -#define ATM_E164_LEN 12 /* maximum E.164 number length */ - -#define ATM_AFI_DCC 0x39 /* DCC ATM Format */ -#define ATM_AFI_ICD 0x47 /* ICD ATM Format */ -#define ATM_AFI_E164 0x45 /* E.164 ATM Format */ -#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */ - -#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */ -#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */ -#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */ -#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */ +#include -#define ATM_LIJ_NONE 0 /* no leaf-initiated join */ -#define ATM_LIJ 1 /* request joining */ -#define ATM_LIJ_RPJ 2 /* set to root-prompted join */ -#define ATM_LIJ_NJ 3 /* set to network join */ - - -struct sockaddr_atmsvc { - unsigned short sas_family; /* address family, AF_ATMSVC */ - struct { /* SVC address */ - unsigned char prv[ATM_ESA_LEN];/* private ATM address */ - char pub[ATM_E164_LEN+1]; /* public address (E.164) */ - /* unused addresses must be bzero'ed */ - char lij_type; /* role in LIJ call; one of ATM_LIJ* */ - __u32 lij_id; /* LIJ call identifier */ - } sas_addr __ATM_API_ALIGN; /* SVC address */ -}; - - -static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr) -{ - return *addr.sas_addr.prv || *addr.sas_addr.pub; -} - - -static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr) -{ - return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci; -} - - -/* - * Some stuff for linux/sockios.h - */ - -struct atmif_sioc { - int number; - int length; - void __user *arg; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include struct compat_atmif_sioc { @@ -246,6 +13,3 @@ struct compat_atmif_sioc { }; #endif #endif - -typedef unsigned short atm_backend_t; -#endif diff --git a/include/linux/atm_eni.h b/include/linux/atm_eni.h deleted file mode 100644 index 34f317972551..000000000000 --- a/include/linux/atm_eni.h +++ /dev/null @@ -1,23 +0,0 @@ -/* atm_eni.h - Driver-specific declarations of the ENI driver (for use by - driver-specific utilities) */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ENI_H -#define LINUX_ATM_ENI_H - -#include - - -struct eni_multipliers { - int tx,rx; /* values are in percent and must be > 100 */ -}; - - -#define ENI_MEMDUMP _IOW('a',ATMIOC_SARPRV,struct atmif_sioc) - /* printk memory map */ -#define ENI_SETMULT _IOW('a',ATMIOC_SARPRV+7,struct atmif_sioc) - /* set buffer multipliers */ - -#endif diff --git a/include/linux/atm_he.h b/include/linux/atm_he.h deleted file mode 100644 index 2a7713b597cf..000000000000 --- a/include/linux/atm_he.h +++ /dev/null @@ -1,20 +0,0 @@ -/* atm_he.h */ - -#ifndef LINUX_ATM_HE_H -#define LINUX_ATM_HE_H - -#include - -#define HE_GET_REG _IOW('a', ATMIOC_SARPRV, struct atmif_sioc) - -#define HE_REGTYPE_PCI 1 -#define HE_REGTYPE_RCM 2 -#define HE_REGTYPE_TCM 3 -#define HE_REGTYPE_MBOX 4 - -struct he_ioctl_reg { - unsigned addr, val; - char type; -}; - -#endif /* LINUX_ATM_HE_H */ diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h deleted file mode 100644 index 8b724000aa50..000000000000 --- a/include/linux/atm_idt77105.h +++ /dev/null @@ -1,28 +0,0 @@ -/* atm_idt77105.h - Driver-specific declarations of the IDT77105 driver (for - * use by driver-specific utilities) */ - -/* Written 1999 by Greg Banks . Copied from atm_suni.h. */ - - -#ifndef LINUX_ATM_IDT77105_H -#define LINUX_ATM_IDT77105_H - -#include -#include -#include - -/* - * Structure for IDT77105_GETSTAT and IDT77105_GETSTATZ ioctls. - * Pointed to by `arg' in atmif_sioc. - */ -struct idt77105_stats { - __u32 symbol_errors; /* wire symbol errors */ - __u32 tx_cells; /* cells transmitted */ - __u32 rx_cells; /* cells received */ - __u32 rx_hec_errors; /* Header Error Check errors on receive */ -}; - -#define IDT77105_GETSTAT _IOW('a',ATMIOC_PHYPRV+2,struct atmif_sioc) /* get stats */ -#define IDT77105_GETSTATZ _IOW('a',ATMIOC_PHYPRV+3,struct atmif_sioc) /* get stats and zero */ - -#endif diff --git a/include/linux/atm_nicstar.h b/include/linux/atm_nicstar.h deleted file mode 100644 index 577b79f33e8d..000000000000 --- a/include/linux/atm_nicstar.h +++ /dev/null @@ -1,53 +0,0 @@ -/****************************************************************************** - * - * atm_nicstar.h - * - * Driver-specific declarations for use by NICSTAR driver specific utils. - * - * Author: Rui Prior - * - * (C) INESC 1998 - * - ******************************************************************************/ - - -#ifndef LINUX_ATM_NICSTAR_H -#define LINUX_ATM_NICSTAR_H - -/* Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include -#include - -#define NS_GETPSTAT _IOWR('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define NS_SETBUFLEV _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* set buffer level markers */ -#define NS_ADJBUFLEV _IO('a',ATMIOC_SARPRV+3) - /* adjust buffer level */ - -typedef struct buf_nr -{ - unsigned min; - unsigned init; - unsigned max; -}buf_nr; - - -typedef struct pool_levels -{ - int buftype; - int count; /* (At least for now) only used in NS_GETPSTAT */ - buf_nr level; -} pool_levels; - -/* type must be one of the following: */ -#define NS_BUFTYPE_SMALL 1 -#define NS_BUFTYPE_LARGE 2 -#define NS_BUFTYPE_HUGE 3 -#define NS_BUFTYPE_IOVEC 4 - - -#endif /* LINUX_ATM_NICSTAR_H */ diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h index 375638f8554b..db6b65fc0aec 100644 --- a/include/linux/atm_tcp.h +++ b/include/linux/atm_tcp.h @@ -3,61 +3,11 @@ /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ - #ifndef LINUX_ATM_TCP_H #define LINUX_ATM_TCP_H -#include -#include -#include -#include - - -/* - * All values in struct atmtcp_hdr are in network byte order - */ - -struct atmtcp_hdr { - __u16 vpi; - __u16 vci; - __u32 length; /* ... of data part */ -}; - -/* - * All values in struct atmtcp_command are in host byte order - */ - -#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ -#define ATMTCP_CTRL_OPEN 1 /* request/reply */ -#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ +#include -struct atmtcp_control { - struct atmtcp_hdr hdr; /* must be first */ - int type; /* message type; both directions */ - atm_kptr_t vcc; /* both directions */ - struct sockaddr_atmpvc addr; /* suggested value from kernel */ - struct atm_qos qos; /* both directions */ - int result; /* to kernel only */ -} __ATM_API_ALIGN; - -/* - * Field usage: - * Messge type dir. hdr.v?i type addr qos vcc result - * ----------- ---- ------- ---- ---- --- --- ------ - * OPEN K->D Y Y Y Y Y 0 - * OPEN D->K - Y Y Y Y Y - * CLOSE K->D - - Y - Y 0 - * CLOSE D->K - - - - Y Y - */ - -#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ -#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP - interface */ -#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP - interface */ - - -#ifdef __KERNEL__ struct atm_tcp_ops { int (*attach)(struct atm_vcc *vcc,int itf); @@ -69,5 +19,3 @@ struct atm_tcp_ops { extern struct atm_tcp_ops atm_tcp_ops; #endif - -#endif diff --git a/include/linux/atm_zatm.h b/include/linux/atm_zatm.h deleted file mode 100644 index 10f0fa29454f..000000000000 --- a/include/linux/atm_zatm.h +++ /dev/null @@ -1,52 +0,0 @@ -/* atm_zatm.h - Driver-specific declarations of the ZATM driver (for use by - driver-specific utilities) */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATM_ZATM_H -#define LINUX_ATM_ZATM_H - -/* - * Note: non-kernel programs including this file must also include - * sys/types.h for struct timeval - */ - -#include -#include - -#define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) - /* get pool statistics */ -#define ZATM_GETPOOLZ _IOW('a',ATMIOC_SARPRV+2,struct atmif_sioc) - /* get statistics and zero */ -#define ZATM_SETPOOL _IOW('a',ATMIOC_SARPRV+3,struct atmif_sioc) - /* set pool parameters */ - -struct zatm_pool_info { - int ref_count; /* free buffer pool usage counters */ - int low_water,high_water; /* refill parameters */ - int rqa_count,rqu_count; /* queue condition counters */ - int offset,next_off; /* alignment optimizations: offset */ - int next_cnt,next_thres; /* repetition counter and threshold */ -}; - -struct zatm_pool_req { - int pool_num; /* pool number */ - struct zatm_pool_info info; /* actual information */ -}; - -struct zatm_t_hist { - struct timeval real; /* real (wall-clock) time */ - struct timeval expected; /* expected real time */ -}; - - -#define ZATM_OAM_POOL 0 /* free buffer pool for OAM cells */ -#define ZATM_AAL0_POOL 1 /* free buffer pool for AAL0 cells */ -#define ZATM_AAL5_POOL_BASE 2 /* first AAL5 free buffer pool */ -#define ZATM_LAST_POOL ZATM_AAL5_POOL_BASE+10 /* max. 64 kB */ - -#define ZATM_TIMER_HISTORY_SIZE 16 /* number of timer adjustments to - record; must be 2^n */ - -#endif diff --git a/include/linux/atmapi.h b/include/linux/atmapi.h deleted file mode 100644 index 8fe54d90d95b..000000000000 --- a/include/linux/atmapi.h +++ /dev/null @@ -1,29 +0,0 @@ -/* atmapi.h - ATM API user space/kernel compatibility */ - -/* Written 1999,2000 by Werner Almesberger, EPFL ICA */ - - -#ifndef _LINUX_ATMAPI_H -#define _LINUX_ATMAPI_H - -#if defined(__sparc__) || defined(__ia64__) -/* such alignment is not required on 32 bit sparcs, but we can't - figure that we are on a sparc64 while compiling user-space programs. */ -#define __ATM_API_ALIGN __attribute__((aligned(8))) -#else -#define __ATM_API_ALIGN -#endif - - -/* - * Opaque type for kernel pointers. Note that _ is never accessed. We need - * the struct in order hide the array, so that we can make simple assignments - * instead of being forced to use memcpy. It also improves error reporting for - * code that still assumes that we're passing unsigned longs. - * - * Convention: NULL pointers are passed as a field of all zeroes. - */ - -typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; - -#endif diff --git a/include/linux/atmarp.h b/include/linux/atmarp.h deleted file mode 100644 index 231f4bdec730..000000000000 --- a/include/linux/atmarp.h +++ /dev/null @@ -1,41 +0,0 @@ -/* atmarp.h - ATM ARP protocol and kernel-demon interface definitions */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMARP_H -#define _LINUX_ATMARP_H - -#include -#include -#include - - -#define ATMARP_RETRY_DELAY 30 /* request next resolution or forget - NAK after 30 sec - should go into - atmclip.h */ -#define ATMARP_MAX_UNRES_PACKETS 5 /* queue that many packets while - waiting for the resolver */ - - -#define ATMARPD_CTRL _IO('a',ATMIOC_CLIP+1) /* become atmarpd ctrl sock */ -#define ATMARP_MKIP _IO('a',ATMIOC_CLIP+2) /* attach socket to IP */ -#define ATMARP_SETENTRY _IO('a',ATMIOC_CLIP+3) /* fill or hide ARP entry */ -#define ATMARP_ENCAP _IO('a',ATMIOC_CLIP+5) /* change encapsulation */ - - -enum atmarp_ctrl_type { - act_invalid, /* catch uninitialized structures */ - act_need, /* need address resolution */ - act_up, /* interface is coming up */ - act_down, /* interface is going down */ - act_change /* interface configuration has changed */ -}; - -struct atmarp_ctrl { - enum atmarp_ctrl_type type; /* message type */ - int itf_num;/* interface number (if present) */ - __be32 ip; /* IP address (act_need only) */ -}; - -#endif diff --git a/include/linux/atmbr2684.h b/include/linux/atmbr2684.h deleted file mode 100644 index fdb2629b6189..000000000000 --- a/include/linux/atmbr2684.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _LINUX_ATMBR2684_H -#define _LINUX_ATMBR2684_H - -#include -#include -#include /* For IFNAMSIZ */ - -/* - * Type of media we're bridging (ethernet, token ring, etc) Currently only - * ethernet is supported - */ -#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */ -#define BR2684_MEDIA_802_4 (1) /* 802.4 */ -#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */ -#define BR2684_MEDIA_FDDI (3) -#define BR2684_MEDIA_802_6 (4) /* 802.6 */ - - /* used only at device creation: */ -#define BR2684_FLAG_ROUTED (1<<16) /* payload is routed, not bridged */ - -/* - * Is there FCS inbound on this VC? This currently isn't supported. - */ -#define BR2684_FCSIN_NO (0) -#define BR2684_FCSIN_IGNORE (1) -#define BR2684_FCSIN_VERIFY (2) - -/* - * Is there FCS outbound on this VC? This currently isn't supported. - */ -#define BR2684_FCSOUT_NO (0) -#define BR2684_FCSOUT_SENDZERO (1) -#define BR2684_FCSOUT_GENERATE (2) - -/* - * Does this VC include LLC encapsulation? - */ -#define BR2684_ENCAPS_VC (0) /* VC-mux */ -#define BR2684_ENCAPS_LLC (1) -#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */ - -/* - * Is this VC bridged or routed? - */ - -#define BR2684_PAYLOAD_ROUTED (0) -#define BR2684_PAYLOAD_BRIDGED (1) - -/* - * This is for the ATM_NEWBACKENDIF call - these are like socket families: - * the first element of the structure is the backend number and the rest - * is per-backend specific - */ -struct atm_newif_br2684 { - atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ - int media; /* BR2684_MEDIA_*, flags in upper bits */ - char ifname[IFNAMSIZ]; - int mtu; -}; - -/* - * This structure is used to specify a br2684 interface - either by a - * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name - */ -#define BR2684_FIND_BYNOTHING (0) -#define BR2684_FIND_BYNUM (1) -#define BR2684_FIND_BYIFNAME (2) -struct br2684_if_spec { - int method; /* BR2684_FIND_* */ - union { - char ifname[IFNAMSIZ]; - int devnum; - } spec; -}; - -/* - * This is for the ATM_SETBACKEND call - these are like socket families: - * the first element of the structure is the backend number and the rest - * is per-backend specific - */ -struct atm_backend_br2684 { - atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */ - struct br2684_if_spec ifspec; - int fcs_in; /* BR2684_FCSIN_* */ - int fcs_out; /* BR2684_FCSOUT_* */ - int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */ - int encaps; /* BR2684_ENCAPS_* */ - int has_vpiid; /* 1: use vpn_id - Unsupported */ - __u8 vpn_id[7]; - int send_padding; /* unsupported */ - int min_size; /* we will pad smaller packets than this */ -}; - -/* - * The BR2684_SETFILT ioctl is an experimental mechanism for folks - * terminating a large number of IP-only vcc's. When netfilter allows - * efficient per-if in/out filters, this support will be removed - */ -struct br2684_filter { - __be32 prefix; /* network byte order */ - __be32 netmask; /* 0 = disable filter */ -}; - -struct br2684_filter_set { - struct br2684_if_spec ifspec; - struct br2684_filter filter; -}; - -enum br2684_payload { - p_routed = BR2684_PAYLOAD_ROUTED, - p_bridged = BR2684_PAYLOAD_BRIDGED, -}; - -#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \ - struct br2684_filter_set) - -#endif /* _LINUX_ATMBR2684_H */ diff --git a/include/linux/atmclip.h b/include/linux/atmclip.h deleted file mode 100644 index 02c94c448dd6..000000000000 --- a/include/linux/atmclip.h +++ /dev/null @@ -1,21 +0,0 @@ -/* atmclip.h - Classical IP over ATM */ - -/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef LINUX_ATMCLIP_H -#define LINUX_ATMCLIP_H - -#include -#include - - -#define RFC1483LLC_LEN 8 /* LLC+OUI+PID = 8 */ -#define RFC1626_MTU 9180 /* RFC1626 default MTU */ - -#define CLIP_DEFAULT_IDLETIMER 1200 /* 20 minutes, see RFC1755 */ -#define CLIP_CHECK_INTERVAL 10 /* check every ten seconds */ - -#define SIOCMKCLIP _IO('a',ATMIOC_CLIP) /* create IP interface */ - -#endif diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 06fd4bbc58f6..22ef21c33d0c 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -1,218 +1,8 @@ /* atmdev.h - ATM device driver declarations and various related items */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - #ifndef LINUX_ATMDEV_H #define LINUX_ATMDEV_H -#include -#include -#include - - -#define ESI_LEN 6 - -#define ATM_OC3_PCR (155520000/270*260/8/53) - /* OC3 link rate: 155520000 bps - SONET overhead: /270*260 (9 section, 1 path) - bits per cell: /8/53 - max cell rate: 353207.547 cells/sec */ -#define ATM_25_PCR ((25600000/8-8000)/54) - /* 25 Mbps ATM cell rate (59111) */ -#define ATM_OC12_PCR (622080000/1080*1040/8/53) - /* OC12 link rate: 622080000 bps - SONET overhead: /1080*1040 - bits per cell: /8/53 - max cell rate: 1412830.188 cells/sec */ -#define ATM_DS3_PCR (8000*12) - /* DS3: 12 cells in a 125 usec time slot */ - - -#define __AAL_STAT_ITEMS \ - __HANDLE_ITEM(tx); /* TX okay */ \ - __HANDLE_ITEM(tx_err); /* TX errors */ \ - __HANDLE_ITEM(rx); /* RX okay */ \ - __HANDLE_ITEM(rx_err); /* RX errors */ \ - __HANDLE_ITEM(rx_drop); /* RX out of memory */ - -struct atm_aal_stats { -#define __HANDLE_ITEM(i) int i - __AAL_STAT_ITEMS -#undef __HANDLE_ITEM -}; - - -struct atm_dev_stats { - struct atm_aal_stats aal0; - struct atm_aal_stats aal34; - struct atm_aal_stats aal5; -} __ATM_API_ALIGN; - - -#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) - /* get link rate */ -#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) - /* get interface names (numbers) */ -#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) - /* get interface type name */ -#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) - /* get interface ESI */ -#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) - /* get itf's local ATM addr. list */ -#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) - /* reset itf's ATM address list */ -#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) - /* add a local ATM address */ -#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) - /* remove a local ATM address */ -#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) - /* get connection identifier range */ -#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) - /* set connection identifier range */ -#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) - /* set interface ESI */ -#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) - /* force interface ESI */ -#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) - /* register a LECS address */ -#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) - /* unregister a LECS address */ -#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) - /* retrieve LECS address(es) */ - -#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) - /* get AAL layer statistics */ -#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) - /* get AAL layer statistics and zero */ -#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) - /* get loopback mode */ -#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) - /* set loopback mode */ -#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) - /* query supported loopback modes */ -#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) - /* enable or disable single-copy */ -#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) - /* set backend handler */ -#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) - /* use backend to make new if */ -#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) - /* add party to p2mp call */ -#ifdef CONFIG_COMPAT -/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */ -#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf) -#endif -#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) - /* drop party from p2mp call */ - -/* - * These are backend handkers that can be set via the ATM_SETBACKEND call - * above. In the future we may support dynamic loading of these - for now, - * they're just being used to share the ATMIOC_BACKEND ioctls - */ -#define ATM_BACKEND_RAW 0 -#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ -#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ - -/* for ATM_GETTYPE */ -#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ - -/* - * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP - */ - -/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ -#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ -#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ -#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ -/* RESERVED 4 loop back on PHY side ---' */ -#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ -#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ - -/* Direction of loopback */ -#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ -#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ - -#define __ATM_LM_XTLOC(n) ((n) & 0xff) -#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) - -#define ATM_LM_NONE 0 /* no loopback */ - -#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) -#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) -#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) -#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) - -#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) -#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) -#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) -#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) - -/* - * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that - * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) - */ - - -struct atm_iobuf { - int length; - void __user *buffer; -}; - -/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ - -#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ - -struct atm_cirange { - signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ - signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ -}; - -/* for ATM_SETSC; actually taken from the ATM_VF number space */ - -#define ATM_SC_RX 1024 /* enable RX single-copy */ -#define ATM_SC_TX 2048 /* enable TX single-copy */ - -#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out - anyway */ - -/* MF: change_qos (Modify) flags */ - -#define ATM_MF_IMMED 1 /* Block until change is effective */ -#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ -#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ -#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ -#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ -#define ATM_MF_BWD 32 /* Set the backward direction parameters */ - -#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ - ATM_MF_DEC_SHP | ATM_MF_BWD) - -/* - * ATM_VS_* are used to express VC state in a human-friendly way. - */ - -#define ATM_VS_IDLE 0 /* VC is not used */ -#define ATM_VS_CONNECTED 1 /* VC is connected */ -#define ATM_VS_CLOSING 2 /* VC is closing */ -#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ -#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ -#define ATM_VS_BOUND 5 /* VC is bound */ - -#define ATM_VS2TXT_MAP \ - "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" - -#define ATM_VF2TXT_MAP \ - "ADDR", "READY", "PARTIAL", "REGIS", \ - "RELEASED", "HASQOS", "LISTEN", "META", \ - "256", "512", "1024", "2048", \ - "SESSION", "HASSAP", "BOUND", "CLOSE" - - -#ifdef __KERNEL__ - #include /* wait_queue_head_t */ #include /* struct timeval */ #include @@ -221,6 +11,7 @@ struct atm_cirange { #include #include #include +#include #ifdef CONFIG_PROC_FS #include @@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *); int register_atmdevice_notifier(struct notifier_block *nb); void unregister_atmdevice_notifier(struct notifier_block *nb); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/atmioc.h b/include/linux/atmioc.h deleted file mode 100644 index 37f67aa8f1c1..000000000000 --- a/include/linux/atmioc.h +++ /dev/null @@ -1,41 +0,0 @@ -/* atmioc.h - ranges for ATM-related ioctl numbers */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -/* - * See http://icawww1.epfl.ch/linux-atm/magic.html for the complete list of - * "magic" ioctl numbers. - */ - - -#ifndef _LINUX_ATMIOC_H -#define _LINUX_ATMIOC_H - -#include - /* everybody including atmioc.h will also need _IO{,R,W,WR} */ - -#define ATMIOC_PHYCOM 0x00 /* PHY device common ioctls, globally unique */ -#define ATMIOC_PHYCOM_END 0x0f -#define ATMIOC_PHYTYP 0x10 /* PHY dev type ioctls, unique per PHY type */ -#define ATMIOC_PHYTYP_END 0x2f -#define ATMIOC_PHYPRV 0x30 /* PHY dev private ioctls, unique per driver */ -#define ATMIOC_PHYPRV_END 0x4f -#define ATMIOC_SARCOM 0x50 /* SAR device common ioctls, globally unique */ -#define ATMIOC_SARCOM_END 0x50 -#define ATMIOC_SARPRV 0x60 /* SAR dev private ioctls, unique per driver */ -#define ATMIOC_SARPRV_END 0x7f -#define ATMIOC_ITF 0x80 /* Interface ioctls, globally unique */ -#define ATMIOC_ITF_END 0x8f -#define ATMIOC_BACKEND 0x90 /* ATM generic backend ioctls, u. per backend */ -#define ATMIOC_BACKEND_END 0xaf -/* 0xb0-0xbf: Reserved for future use */ -#define ATMIOC_AREQUIPA 0xc0 /* Application requested IP over ATM, glob. u. */ -#define ATMIOC_LANE 0xd0 /* LAN Emulation, globally unique */ -#define ATMIOC_MPOA 0xd8 /* MPOA, globally unique */ -#define ATMIOC_CLIP 0xe0 /* Classical IP over ATM control, globally u. */ -#define ATMIOC_CLIP_END 0xef -#define ATMIOC_SPECIAL 0xf0 /* Special-purpose controls, globally unique */ -#define ATMIOC_SPECIAL_END 0xff - -#endif diff --git a/include/linux/atmlec.h b/include/linux/atmlec.h deleted file mode 100644 index 302791e3ab2b..000000000000 --- a/include/linux/atmlec.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * ATM Lan Emulation Daemon driver interface - * - * Marko Kiiskila - */ - -#ifndef _ATMLEC_H_ -#define _ATMLEC_H_ - -#include -#include -#include -#include -#include - -/* ATM lec daemon control socket */ -#define ATMLEC_CTRL _IO('a', ATMIOC_LANE) -#define ATMLEC_DATA _IO('a', ATMIOC_LANE+1) -#define ATMLEC_MCAST _IO('a', ATMIOC_LANE+2) - -/* Maximum number of LEC interfaces (tweakable) */ -#define MAX_LEC_ITF 48 - -typedef enum { - l_set_mac_addr, - l_del_mac_addr, - l_svc_setup, - l_addr_delete, - l_topology_change, - l_flush_complete, - l_arp_update, - l_narp_req, /* LANE2 mandates the use of this */ - l_config, - l_flush_tran_id, - l_set_lecid, - l_arp_xmt, - l_rdesc_arp_xmt, - l_associate_req, - l_should_bridge /* should we bridge this MAC? */ -} atmlec_msg_type; - -#define ATMLEC_MSG_TYPE_MAX l_should_bridge - -struct atmlec_config_msg { - unsigned int maximum_unknown_frame_count; - unsigned int max_unknown_frame_time; - unsigned short max_retry_count; - unsigned int aging_time; - unsigned int forward_delay_time; - unsigned int arp_response_time; - unsigned int flush_timeout; - unsigned int path_switching_delay; - unsigned int lane_version; /* LANE2: 1 for LANEv1, 2 for LANEv2 */ - int mtu; - int is_proxy; -}; - -struct atmlec_msg { - atmlec_msg_type type; - int sizeoftlvs; /* LANE2: if != 0, tlvs follow */ - union { - struct { - unsigned char mac_addr[ETH_ALEN]; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned int flag; /* - * Topology_change flag, - * remoteflag, permanent flag, - * lecid, transaction id - */ - unsigned int targetless_le_arp; /* LANE2 */ - unsigned int no_source_le_narp; /* LANE2 */ - } normal; - struct atmlec_config_msg config; - struct { - __u16 lec_id; /* requestor lec_id */ - __u32 tran_id; /* transaction id */ - unsigned char mac_addr[ETH_ALEN]; /* dst mac addr */ - unsigned char atm_addr[ATM_ESA_LEN]; /* reqestor ATM addr */ - } proxy; /* - * For mapping LE_ARP requests to responses. Filled by - * zeppelin, returned by kernel. Used only when proxying - */ - } content; -} __ATM_API_ALIGN; - -struct atmlec_ioc { - int dev_num; - unsigned char atm_addr[ATM_ESA_LEN]; - unsigned char receive; /* 1= receive vcc, 0 = send vcc */ -}; -#endif /* _ATMLEC_H_ */ diff --git a/include/linux/atmmpc.h b/include/linux/atmmpc.h deleted file mode 100644 index 2aba5787fa63..000000000000 --- a/include/linux/atmmpc.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef _ATMMPC_H_ -#define _ATMMPC_H_ - -#include -#include -#include -#include - -#define ATMMPC_CTRL _IO('a', ATMIOC_MPOA) -#define ATMMPC_DATA _IO('a', ATMIOC_MPOA+1) - -#define MPC_SOCKET_INGRESS 1 -#define MPC_SOCKET_EGRESS 2 - -struct atmmpc_ioc { - int dev_num; - __be32 ipaddr; /* the IP address of the shortcut */ - int type; /* ingress or egress */ -}; - -typedef struct in_ctrl_info { - __u8 Last_NHRP_CIE_code; - __u8 Last_Q2931_cause_value; - __u8 eg_MPC_ATM_addr[ATM_ESA_LEN]; - __be32 tag; - __be32 in_dst_ip; /* IP address this ingress MPC sends packets to */ - __u16 holding_time; - __u32 request_id; -} in_ctrl_info; - -typedef struct eg_ctrl_info { - __u8 DLL_header[256]; - __u8 DH_length; - __be32 cache_id; - __be32 tag; - __be32 mps_ip; - __be32 eg_dst_ip; /* IP address to which ingress MPC sends packets */ - __u8 in_MPC_data_ATM_addr[ATM_ESA_LEN]; - __u16 holding_time; -} eg_ctrl_info; - -struct mpc_parameters { - __u16 mpc_p1; /* Shortcut-Setup Frame Count */ - __u16 mpc_p2; /* Shortcut-Setup Frame Time */ - __u8 mpc_p3[8]; /* Flow-detection Protocols */ - __u16 mpc_p4; /* MPC Initial Retry Time */ - __u16 mpc_p5; /* MPC Retry Time Maximum */ - __u16 mpc_p6; /* Hold Down Time */ -} ; - -struct k_message { - __u16 type; - __be32 ip_mask; - __u8 MPS_ctrl[ATM_ESA_LEN]; - union { - in_ctrl_info in_info; - eg_ctrl_info eg_info; - struct mpc_parameters params; - } content; - struct atm_qos qos; -} __ATM_API_ALIGN; - -struct llc_snap_hdr { - /* RFC 1483 LLC/SNAP encapsulation for routed IP PDUs */ - __u8 dsap; /* Destination Service Access Point (0xAA) */ - __u8 ssap; /* Source Service Access Point (0xAA) */ - __u8 ui; /* Unnumbered Information (0x03) */ - __u8 org[3]; /* Organizational identification (0x000000) */ - __u8 type[2]; /* Ether type (for IP) (0x0800) */ -}; - -/* TLVs this MPC recognizes */ -#define TLV_MPOA_DEVICE_TYPE 0x00a03e2a - -/* MPOA device types in MPOA Device Type TLV */ -#define NON_MPOA 0 -#define MPS 1 -#define MPC 2 -#define MPS_AND_MPC 3 - - -/* MPC parameter defaults */ - -#define MPC_P1 10 /* Shortcut-Setup Frame Count */ -#define MPC_P2 1 /* Shortcut-Setup Frame Time */ -#define MPC_P3 0 /* Flow-detection Protocols */ -#define MPC_P4 5 /* MPC Initial Retry Time */ -#define MPC_P5 40 /* MPC Retry Time Maximum */ -#define MPC_P6 160 /* Hold Down Time */ -#define HOLDING_TIME_DEFAULT 1200 /* same as MPS-p7 */ - -/* MPC constants */ - -#define MPC_C1 2 /* Retry Time Multiplier */ -#define MPC_C2 60 /* Initial Keep-Alive Lifetime */ - -/* Message types - to MPOA daemon */ - -#define SND_MPOA_RES_RQST 201 -#define SET_MPS_CTRL_ADDR 202 -#define SND_MPOA_RES_RTRY 203 /* Different type in a retry due to req id */ -#define STOP_KEEP_ALIVE_SM 204 -#define EGRESS_ENTRY_REMOVED 205 -#define SND_EGRESS_PURGE 206 -#define DIE 207 /* tell the daemon to exit() */ -#define DATA_PLANE_PURGE 208 /* Data plane purge because of egress cache hit miss or dead MPS */ -#define OPEN_INGRESS_SVC 209 - -/* Message types - from MPOA daemon */ - -#define MPOA_TRIGGER_RCVD 101 -#define MPOA_RES_REPLY_RCVD 102 -#define INGRESS_PURGE_RCVD 103 -#define EGRESS_PURGE_RCVD 104 -#define MPS_DEATH 105 -#define CACHE_IMPOS_RCVD 106 -#define SET_MPC_CTRL_ADDR 107 /* Our MPC's control ATM address */ -#define SET_MPS_MAC_ADDR 108 -#define CLEAN_UP_AND_EXIT 109 -#define SET_MPC_PARAMS 110 /* MPC configuration parameters */ - -/* Message types - bidirectional */ - -#define RELOAD 301 /* kill -HUP the daemon for reload */ - -#endif /* _ATMMPC_H_ */ diff --git a/include/linux/atmppp.h b/include/linux/atmppp.h deleted file mode 100644 index 300dcce0c83f..000000000000 --- a/include/linux/atmppp.h +++ /dev/null @@ -1,24 +0,0 @@ -/* atmppp.h - RFC2364 PPPoATM */ - -/* Written 2000 by Mitchell Blank Jr */ - -#ifndef _LINUX_ATMPPP_H -#define _LINUX_ATMPPP_H - -#include - -#define PPPOATM_ENCAPS_AUTODETECT (0) -#define PPPOATM_ENCAPS_VC (1) -#define PPPOATM_ENCAPS_LLC (2) - -/* - * This is for the ATM_SETBACKEND call - these are like socket families: - * the first element of the structure is the backend number and the rest - * is per-backend specific - */ -struct atm_backend_ppp { - atm_backend_t backend_num; /* ATM_BACKEND_PPP */ - int encaps; /* PPPOATM_ENCAPS_* */ -}; - -#endif /* _LINUX_ATMPPP_H */ diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h deleted file mode 100644 index 799b104515d7..000000000000 --- a/include/linux/atmsap.h +++ /dev/null @@ -1,162 +0,0 @@ -/* atmsap.h - ATM Service Access Point addressing definitions */ - -/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMSAP_H -#define _LINUX_ATMSAP_H - -#include - -/* - * BEGIN_xx and END_xx markers are used for automatic generation of - * documentation. Do not change them. - */ - - -/* - * Layer 2 protocol identifiers - */ - -/* BEGIN_L2 */ -#define ATM_L2_NONE 0 /* L2 not specified */ -#define ATM_L2_ISO1745 0x01 /* Basic mode ISO 1745 */ -#define ATM_L2_Q291 0x02 /* ITU-T Q.291 (Rec. I.441) */ -#define ATM_L2_X25_LL 0x06 /* ITU-T X.25, link layer */ -#define ATM_L2_X25_ML 0x07 /* ITU-T X.25, multilink */ -#define ATM_L2_LAPB 0x08 /* Extended LAPB, half-duplex (Rec. T.71) */ -#define ATM_L2_HDLC_ARM 0x09 /* HDLC ARM (ISO/IEC 4335) */ -#define ATM_L2_HDLC_NRM 0x0a /* HDLC NRM (ISO/IEC 4335) */ -#define ATM_L2_HDLC_ABM 0x0b /* HDLC ABM (ISO/IEC 4335) */ -#define ATM_L2_ISO8802 0x0c /* LAN LLC (ISO/IEC 8802/2) */ -#define ATM_L2_X75 0x0d /* ITU-T X.75, SLP */ -#define ATM_L2_Q922 0x0e /* ITU-T Q.922 */ -#define ATM_L2_USER 0x10 /* user-specified */ -#define ATM_L2_ISO7776 0x11 /* ISO 7776 DTE-DTE */ -/* END_L2 */ - - -/* - * Layer 3 protocol identifiers - */ - -/* BEGIN_L3 */ -#define ATM_L3_NONE 0 /* L3 not specified */ -#define ATM_L3_X25 0x06 /* ITU-T X.25, packet layer */ -#define ATM_L3_ISO8208 0x07 /* ISO/IEC 8208 */ -#define ATM_L3_X223 0x08 /* ITU-T X.223 | ISO/IEC 8878 */ -#define ATM_L3_ISO8473 0x09 /* ITU-T X.233 | ISO/IEC 8473 */ -#define ATM_L3_T70 0x0a /* ITU-T T.70 minimum network layer */ -#define ATM_L3_TR9577 0x0b /* ISO/IEC TR 9577 */ -#define ATM_L3_H310 0x0c /* ITU-T Recommendation H.310 */ -#define ATM_L3_H321 0x0d /* ITU-T Recommendation H.321 */ -#define ATM_L3_USER 0x10 /* user-specified */ -/* END_L3 */ - - -/* - * High layer identifiers - */ - -/* BEGIN_HL */ -#define ATM_HL_NONE 0 /* HL not specified */ -#define ATM_HL_ISO 0x01 /* ISO */ -#define ATM_HL_USER 0x02 /* user-specific */ -#define ATM_HL_HLP 0x03 /* high layer profile - UNI 3.0 only */ -#define ATM_HL_VENDOR 0x04 /* vendor-specific application identifier */ -/* END_HL */ - - -/* - * ITU-T coded mode of operation - */ - -/* BEGIN_IMD */ -#define ATM_IMD_NONE 0 /* mode not specified */ -#define ATM_IMD_NORMAL 1 /* normal mode of operation */ -#define ATM_IMD_EXTENDED 2 /* extended mode of operation */ -/* END_IMD */ - -/* - * H.310 code points - */ - -#define ATM_TT_NONE 0 /* terminal type not specified */ -#define ATM_TT_RX 1 /* receive only */ -#define ATM_TT_TX 2 /* send only */ -#define ATM_TT_RXTX 3 /* receive and send */ - -#define ATM_MC_NONE 0 /* no multiplexing */ -#define ATM_MC_TS 1 /* transport stream (TS) */ -#define ATM_MC_TS_FEC 2 /* transport stream with forward error corr. */ -#define ATM_MC_PS 3 /* program stream (PS) */ -#define ATM_MC_PS_FEC 4 /* program stream with forward error corr. */ -#define ATM_MC_H221 5 /* ITU-T Rec. H.221 */ - -/* - * SAP structures - */ - -#define ATM_MAX_HLI 8 /* maximum high-layer information length */ - - -struct atm_blli { - unsigned char l2_proto; /* layer 2 protocol */ - union { - struct { - unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ - /* absent */ - unsigned char window; /* window size (k), 1-127 (0 to omit) */ - } itu; /* ITU-T encoding */ - unsigned char user; /* user-specified l2 information */ - } l2; - unsigned char l3_proto; /* layer 3 protocol */ - union { - struct { - unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */ - /* absent */ - unsigned char def_size; /* default packet size (log2), 4-12 (0 to */ - /* omit) */ - unsigned char window;/* packet window size, 1-127 (0 to omit) */ - } itu; /* ITU-T encoding */ - unsigned char user; /* user specified l3 information */ - struct { /* if l3_proto = ATM_L3_H310 */ - unsigned char term_type; /* terminal type */ - unsigned char fw_mpx_cap; /* forward multiplexing capability */ - /* only if term_type != ATM_TT_NONE */ - unsigned char bw_mpx_cap; /* backward multiplexing capability */ - /* only if term_type != ATM_TT_NONE */ - } h310; - struct { /* if l3_proto = ATM_L3_TR9577 */ - unsigned char ipi; /* initial protocol id */ - unsigned char snap[5];/* IEEE 802.1 SNAP identifier */ - /* (only if ipi == NLPID_IEEE802_1_SNAP) */ - } tr9577; - } l3; -} __ATM_API_ALIGN; - - -struct atm_bhli { - unsigned char hl_type; /* high layer information type */ - unsigned char hl_length; /* length (only if hl_type == ATM_HL_USER || */ - /* hl_type == ATM_HL_ISO) */ - unsigned char hl_info[ATM_MAX_HLI];/* high layer information */ -}; - - -#define ATM_MAX_BLLI 3 /* maximum number of BLLI elements */ - - -struct atm_sap { - struct atm_bhli bhli; /* local SAP, high-layer information */ - struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN; - /* local SAP, low-layer info */ -}; - - -static __inline__ int blli_in_use(struct atm_blli blli) -{ - return blli.l2_proto || blli.l3_proto; -} - -#endif diff --git a/include/linux/atmsvc.h b/include/linux/atmsvc.h deleted file mode 100644 index aa71583b8da7..000000000000 --- a/include/linux/atmsvc.h +++ /dev/null @@ -1,55 +0,0 @@ -/* atmsvc.h - ATM signaling kernel-demon interface definitions */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -#ifndef _LINUX_ATMSVC_H -#define _LINUX_ATMSVC_H - -#include -#include -#include - - -#define ATMSIGD_CTRL _IO('a',ATMIOC_SPECIAL) - /* become ATM signaling demon control socket */ - -enum atmsvc_msg_type { as_catch_null, as_bind, as_connect, as_accept, as_reject, - as_listen, as_okay, as_error, as_indicate, as_close, - as_itf_notify, as_modify, as_identify, as_terminate, - as_addparty, as_dropparty }; - -struct atmsvc_msg { - enum atmsvc_msg_type type; - atm_kptr_t vcc; - atm_kptr_t listen_vcc; /* indicate */ - int reply; /* for okay and close: */ - /* < 0: error before active */ - /* (sigd has discarded ctx) */ - /* ==0: success */ - /* > 0: error when active (still */ - /* need to close) */ - struct sockaddr_atmpvc pvc; /* indicate, okay (connect) */ - struct sockaddr_atmsvc local; /* local SVC address */ - struct atm_qos qos; /* QOS parameters */ - struct atm_sap sap; /* SAP */ - unsigned int session; /* for p2pm */ - struct sockaddr_atmsvc svc; /* SVC address */ -} __ATM_API_ALIGN; - -/* - * Message contents: see ftp://icaftp.epfl.ch/pub/linux/atm/docs/isp-*.tar.gz - */ - -/* - * Some policy stuff for atmsigd and for net/atm/svc.c. Both have to agree on - * what PCR is used to request bandwidth from the device driver. net/atm/svc.c - * tries to do better than that, but only if there's no routing decision (i.e. - * if signaling only uses one ATM interface). - */ - -#define SELECT_TOP_PCR(tp) ((tp).pcr ? (tp).pcr : \ - (tp).max_pcr && (tp).max_pcr != ATM_MAX_PCR ? (tp).max_pcr : \ - (tp).min_pcr ? (tp).min_pcr : ATM_MAX_PCR) - -#endif diff --git a/include/linux/audit.h b/include/linux/audit.h index b889fa64b0e0..bce729afbcf9 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -20,389 +20,11 @@ * Written by Rickard E. (Rik) Faith * */ - #ifndef _LINUX_AUDIT_H_ #define _LINUX_AUDIT_H_ -#include -#include -#include - -/* The netlink messages for the audit system is divided into blocks: - * 1000 - 1099 are for commanding the audit system - * 1100 - 1199 user space trusted application messages - * 1200 - 1299 messages internal to the audit daemon - * 1300 - 1399 audit event messages - * 1400 - 1499 SE Linux use - * 1500 - 1599 kernel LSPP events - * 1600 - 1699 kernel crypto events - * 1700 - 1799 kernel anomaly records - * 1800 - 1899 kernel integrity events - * 1900 - 1999 future kernel use - * 2000 is for otherwise unclassified kernel audit messages (legacy) - * 2001 - 2099 unused (kernel) - * 2100 - 2199 user space anomaly records - * 2200 - 2299 user space actions taken in response to anomalies - * 2300 - 2399 user space generated LSPP events - * 2400 - 2499 user space crypto events - * 2500 - 2999 future user space (maybe integrity labels and related events) - * - * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are - * exclusively user space. 1300-2099 is kernel --> user space - * communication. - */ -#define AUDIT_GET 1000 /* Get status */ -#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */ -#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */ -#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */ -#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */ -#define AUDIT_USER 1005 /* Message from userspace -- deprecated */ -#define AUDIT_LOGIN 1006 /* Define the login id and information */ -#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */ -#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */ -#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */ -#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */ -#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */ -#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */ -#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */ -#define AUDIT_TRIM 1014 /* Trim junk from watched tree */ -#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */ -#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */ -#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ - -#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ -#define AUDIT_USER_AVC 1107 /* We filter this differently */ -#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */ -#define AUDIT_LAST_USER_MSG 1199 -#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */ -#define AUDIT_LAST_USER_MSG2 2999 - -#define AUDIT_DAEMON_START 1200 /* Daemon startup record */ -#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ -#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ -#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */ - -#define AUDIT_SYSCALL 1300 /* Syscall event */ -/* #define AUDIT_FS_WATCH 1301 * Deprecated */ -#define AUDIT_PATH 1302 /* Filename path information */ -#define AUDIT_IPC 1303 /* IPC record */ -#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */ -#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */ -#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */ -#define AUDIT_CWD 1307 /* Current working directory */ -#define AUDIT_EXECVE 1309 /* execve arguments */ -#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */ -#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */ -#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */ -#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */ -#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */ -#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */ -#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */ -#define AUDIT_OBJ_PID 1318 /* ptrace target */ -#define AUDIT_TTY 1319 /* Input on an administrative TTY */ -#define AUDIT_EOE 1320 /* End of multi-record event */ -#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */ -#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */ -#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ -#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ -#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ - -#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ -#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ -#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */ -#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */ -#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */ -#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */ -#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */ -#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */ -#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */ -#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */ -#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */ -#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */ -#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */ -#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */ -#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */ -#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */ - -#define AUDIT_FIRST_KERN_ANOM_MSG 1700 -#define AUDIT_LAST_KERN_ANOM_MSG 1799 -#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ -#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ -#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */ -#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ -#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ -#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ -#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ -#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ -#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */ - -#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ - -/* Rule flags */ -#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */ -#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */ -#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */ -#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */ -#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */ -#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */ - -#define AUDIT_NR_FILTERS 6 - -#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ - -/* Rule actions */ -#define AUDIT_NEVER 0 /* Do not build context if rule matches */ -#define AUDIT_POSSIBLE 1 /* Build context if rule matches */ -#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */ - -/* Rule structure sizes -- if these change, different AUDIT_ADD and - * AUDIT_LIST commands must be implemented. */ -#define AUDIT_MAX_FIELDS 64 -#define AUDIT_MAX_KEY_LEN 256 -#define AUDIT_BITMASK_SIZE 64 -#define AUDIT_WORD(nr) ((__u32)((nr)/32)) -#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) - -#define AUDIT_SYSCALL_CLASSES 16 -#define AUDIT_CLASS_DIR_WRITE 0 -#define AUDIT_CLASS_DIR_WRITE_32 1 -#define AUDIT_CLASS_CHATTR 2 -#define AUDIT_CLASS_CHATTR_32 3 -#define AUDIT_CLASS_READ 4 -#define AUDIT_CLASS_READ_32 5 -#define AUDIT_CLASS_WRITE 6 -#define AUDIT_CLASS_WRITE_32 7 -#define AUDIT_CLASS_SIGNAL 8 -#define AUDIT_CLASS_SIGNAL_32 9 - -/* This bitmask is used to validate user input. It represents all bits that - * are currently used in an audit field constant understood by the kernel. - * If you are adding a new #define AUDIT_, please ensure that - * AUDIT_UNUSED_BITS is updated if need be. */ -#define AUDIT_UNUSED_BITS 0x07FFFC00 - -/* AUDIT_FIELD_COMPARE rule list */ -#define AUDIT_COMPARE_UID_TO_OBJ_UID 1 -#define AUDIT_COMPARE_GID_TO_OBJ_GID 2 -#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3 -#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4 -#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5 -#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6 -#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7 -#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 -#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 - -#define AUDIT_COMPARE_UID_TO_AUID 10 -#define AUDIT_COMPARE_UID_TO_EUID 11 -#define AUDIT_COMPARE_UID_TO_FSUID 12 -#define AUDIT_COMPARE_UID_TO_SUID 13 - -#define AUDIT_COMPARE_AUID_TO_FSUID 14 -#define AUDIT_COMPARE_AUID_TO_SUID 15 -#define AUDIT_COMPARE_AUID_TO_EUID 16 - -#define AUDIT_COMPARE_EUID_TO_SUID 17 -#define AUDIT_COMPARE_EUID_TO_FSUID 18 - -#define AUDIT_COMPARE_SUID_TO_FSUID 19 - -#define AUDIT_COMPARE_GID_TO_EGID 20 -#define AUDIT_COMPARE_GID_TO_FSGID 21 -#define AUDIT_COMPARE_GID_TO_SGID 22 - -#define AUDIT_COMPARE_EGID_TO_FSGID 23 -#define AUDIT_COMPARE_EGID_TO_SGID 24 -#define AUDIT_COMPARE_SGID_TO_FSGID 25 - -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID - -/* Rule fields */ - /* These are useful when checking the - * task structure at task creation time - * (AUDIT_PER_TASK). */ -#define AUDIT_PID 0 -#define AUDIT_UID 1 -#define AUDIT_EUID 2 -#define AUDIT_SUID 3 -#define AUDIT_FSUID 4 -#define AUDIT_GID 5 -#define AUDIT_EGID 6 -#define AUDIT_SGID 7 -#define AUDIT_FSGID 8 -#define AUDIT_LOGINUID 9 -#define AUDIT_PERS 10 -#define AUDIT_ARCH 11 -#define AUDIT_MSGTYPE 12 -#define AUDIT_SUBJ_USER 13 /* security label user */ -#define AUDIT_SUBJ_ROLE 14 /* security label role */ -#define AUDIT_SUBJ_TYPE 15 /* security label type */ -#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */ -#define AUDIT_SUBJ_CLR 17 /* security label clearance label */ -#define AUDIT_PPID 18 -#define AUDIT_OBJ_USER 19 -#define AUDIT_OBJ_ROLE 20 -#define AUDIT_OBJ_TYPE 21 -#define AUDIT_OBJ_LEV_LOW 22 -#define AUDIT_OBJ_LEV_HIGH 23 - - /* These are ONLY useful when checking - * at syscall exit time (AUDIT_AT_EXIT). */ -#define AUDIT_DEVMAJOR 100 -#define AUDIT_DEVMINOR 101 -#define AUDIT_INODE 102 -#define AUDIT_EXIT 103 -#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ -#define AUDIT_WATCH 105 -#define AUDIT_PERM 106 -#define AUDIT_DIR 107 -#define AUDIT_FILETYPE 108 -#define AUDIT_OBJ_UID 109 -#define AUDIT_OBJ_GID 110 -#define AUDIT_FIELD_COMPARE 111 - -#define AUDIT_ARG0 200 -#define AUDIT_ARG1 (AUDIT_ARG0+1) -#define AUDIT_ARG2 (AUDIT_ARG0+2) -#define AUDIT_ARG3 (AUDIT_ARG0+3) - -#define AUDIT_FILTERKEY 210 - -#define AUDIT_NEGATE 0x80000000 - -/* These are the supported operators. - * 4 2 1 8 - * = > < ? - * ---------- - * 0 0 0 0 00 nonsense - * 0 0 0 1 08 & bit mask - * 0 0 1 0 10 < - * 0 1 0 0 20 > - * 0 1 1 0 30 != - * 1 0 0 0 40 = - * 1 0 0 1 48 &= bit test - * 1 0 1 0 50 <= - * 1 1 0 0 60 >= - * 1 1 1 1 78 all operators - */ -#define AUDIT_BIT_MASK 0x08000000 -#define AUDIT_LESS_THAN 0x10000000 -#define AUDIT_GREATER_THAN 0x20000000 -#define AUDIT_NOT_EQUAL 0x30000000 -#define AUDIT_EQUAL 0x40000000 -#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL) -#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL) -#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL) -#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK) - -enum { - Audit_equal, - Audit_not_equal, - Audit_bitmask, - Audit_bittest, - Audit_lt, - Audit_gt, - Audit_le, - Audit_ge, - Audit_bad -}; - -/* Status symbols */ - /* Mask values */ -#define AUDIT_STATUS_ENABLED 0x0001 -#define AUDIT_STATUS_FAILURE 0x0002 -#define AUDIT_STATUS_PID 0x0004 -#define AUDIT_STATUS_RATE_LIMIT 0x0008 -#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 - /* Failure-to-log actions */ -#define AUDIT_FAIL_SILENT 0 -#define AUDIT_FAIL_PRINTK 1 -#define AUDIT_FAIL_PANIC 2 - -/* distinguish syscall tables */ -#define __AUDIT_ARCH_64BIT 0x80000000 -#define __AUDIT_ARCH_LE 0x40000000 -#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARMEB (EM_ARM) -#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_FRV (EM_FRV) -#define AUDIT_ARCH_H8300 (EM_H8_300) -#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_M32R (EM_M32R) -#define AUDIT_ARCH_M68K (EM_68K) -#define AUDIT_ARCH_MIPS (EM_MIPS) -#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_OPENRISC (EM_OPENRISC) -#define AUDIT_ARCH_PARISC (EM_PARISC) -#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_PPC (EM_PPC) -#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_S390 (EM_S390) -#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SH (EM_SH) -#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SPARC (EM_SPARC) -#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) - -#define AUDIT_PERM_EXEC 1 -#define AUDIT_PERM_WRITE 2 -#define AUDIT_PERM_READ 4 -#define AUDIT_PERM_ATTR 8 - -struct audit_status { - __u32 mask; /* Bit mask for valid entries */ - __u32 enabled; /* 1 = enabled, 0 = disabled */ - __u32 failure; /* Failure-to-log action */ - __u32 pid; /* pid of auditd process */ - __u32 rate_limit; /* messages rate limit (per second) */ - __u32 backlog_limit; /* waiting messages limit */ - __u32 lost; /* messages lost */ - __u32 backlog; /* messages waiting in queue */ -}; - -struct audit_tty_status { - __u32 enabled; /* 1 = enabled, 0 = disabled */ -}; - -/* audit_rule_data supports filter rules with both integer and string - * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and - * AUDIT_LIST_RULES requests. - */ -struct audit_rule_data { - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */ - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; - __u32 fieldflags[AUDIT_MAX_FIELDS]; - __u32 buflen; /* total length of string fields */ - char buf[0]; /* string fields buffer */ -}; - -/* audit_rule is supported to maintain backward compatibility with - * userspace. It supports integer fields only and corresponds to - * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests. - */ -struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; -}; - -#ifdef __KERNEL__ #include +#include struct audit_sig_info { uid_t uid; @@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf) } #endif -#endif diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h index da64e15004b6..fcd704d354c4 100644 --- a/include/linux/auto_fs.h +++ b/include/linux/auto_fs.h @@ -10,77 +10,11 @@ * * ----------------------------------------------------------------------- */ - #ifndef _LINUX_AUTO_FS_H #define _LINUX_AUTO_FS_H -#include -#ifdef __KERNEL__ #include #include #include -#else -#include -#endif /* __KERNEL__ */ - -/* This file describes autofs v3 */ -#define AUTOFS_PROTO_VERSION 3 - -/* Range of protocol versions defined */ -#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION -#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION - -/* - * Architectures where both 32- and 64-bit binaries can be executed - * on 64-bit kernels need this. This keeps the structure format - * uniform, and makes sure the wait_queue_token isn't too big to be - * passed back down to the kernel. - * - * This assumes that on these architectures: - * mode 32 bit 64 bit - * ------------------------- - * int 32 bit 32 bit - * long 32 bit 64 bit - * - * If so, 32-bit user-space code should be backwards compatible. - */ - -#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ - || defined(__powerpc__) || defined(__s390__) -typedef unsigned int autofs_wqt_t; -#else -typedef unsigned long autofs_wqt_t; -#endif - -/* Packet types */ -#define autofs_ptype_missing 0 /* Missing entry (mount request) */ -#define autofs_ptype_expire 1 /* Expire entry (umount request) */ - -struct autofs_packet_hdr { - int proto_version; /* Protocol version */ - int type; /* Type of packet */ -}; - -struct autofs_packet_missing { - struct autofs_packet_hdr hdr; - autofs_wqt_t wait_queue_token; - int len; - char name[NAME_MAX+1]; -}; - -/* v3 expire (via ioctl) */ -struct autofs_packet_expire { - struct autofs_packet_hdr hdr; - int len; - char name[NAME_MAX+1]; -}; - -#define AUTOFS_IOC_READY _IO(0x93,0x60) -#define AUTOFS_IOC_FAIL _IO(0x93,0x61) -#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62) -#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int) -#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t) -#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long) -#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire) - +#include #endif /* _LINUX_AUTO_FS_H */ diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h deleted file mode 100644 index e02982fa2953..000000000000 --- a/include/linux/auto_fs4.h +++ /dev/null @@ -1,164 +0,0 @@ -/* -*- c -*- - * linux/include/linux/auto_fs4.h - * - * Copyright 1999-2000 Jeremy Fitzhardinge - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - */ - -#ifndef _LINUX_AUTO_FS4_H -#define _LINUX_AUTO_FS4_H - -/* Include common v3 definitions */ -#include -#include - -/* autofs v4 definitions */ -#undef AUTOFS_PROTO_VERSION -#undef AUTOFS_MIN_PROTO_VERSION -#undef AUTOFS_MAX_PROTO_VERSION - -#define AUTOFS_PROTO_VERSION 5 -#define AUTOFS_MIN_PROTO_VERSION 3 -#define AUTOFS_MAX_PROTO_VERSION 5 - -#define AUTOFS_PROTO_SUBVERSION 2 - -/* Mask for expire behaviour */ -#define AUTOFS_EXP_IMMEDIATE 1 -#define AUTOFS_EXP_LEAVES 2 - -#define AUTOFS_TYPE_ANY 0U -#define AUTOFS_TYPE_INDIRECT 1U -#define AUTOFS_TYPE_DIRECT 2U -#define AUTOFS_TYPE_OFFSET 4U - -static inline void set_autofs_type_indirect(unsigned int *type) -{ - *type = AUTOFS_TYPE_INDIRECT; - return; -} - -static inline unsigned int autofs_type_indirect(unsigned int type) -{ - return (type == AUTOFS_TYPE_INDIRECT); -} - -static inline void set_autofs_type_direct(unsigned int *type) -{ - *type = AUTOFS_TYPE_DIRECT; - return; -} - -static inline unsigned int autofs_type_direct(unsigned int type) -{ - return (type == AUTOFS_TYPE_DIRECT); -} - -static inline void set_autofs_type_offset(unsigned int *type) -{ - *type = AUTOFS_TYPE_OFFSET; - return; -} - -static inline unsigned int autofs_type_offset(unsigned int type) -{ - return (type == AUTOFS_TYPE_OFFSET); -} - -static inline unsigned int autofs_type_trigger(unsigned int type) -{ - return (type == AUTOFS_TYPE_DIRECT || type == AUTOFS_TYPE_OFFSET); -} - -/* - * This isn't really a type as we use it to say "no type set" to - * indicate we want to search for "any" mount in the - * autofs_dev_ioctl_ismountpoint() device ioctl function. - */ -static inline void set_autofs_type_any(unsigned int *type) -{ - *type = AUTOFS_TYPE_ANY; - return; -} - -static inline unsigned int autofs_type_any(unsigned int type) -{ - return (type == AUTOFS_TYPE_ANY); -} - -/* Daemon notification packet types */ -enum autofs_notify { - NFY_NONE, - NFY_MOUNT, - NFY_EXPIRE -}; - -/* Kernel protocol version 4 packet types */ - -/* Expire entry (umount request) */ -#define autofs_ptype_expire_multi 2 - -/* Kernel protocol version 5 packet types */ - -/* Indirect mount missing and expire requests. */ -#define autofs_ptype_missing_indirect 3 -#define autofs_ptype_expire_indirect 4 - -/* Direct mount missing and expire requests */ -#define autofs_ptype_missing_direct 5 -#define autofs_ptype_expire_direct 6 - -/* v4 multi expire (via pipe) */ -struct autofs_packet_expire_multi { - struct autofs_packet_hdr hdr; - autofs_wqt_t wait_queue_token; - int len; - char name[NAME_MAX+1]; -}; - -union autofs_packet_union { - struct autofs_packet_hdr hdr; - struct autofs_packet_missing missing; - struct autofs_packet_expire expire; - struct autofs_packet_expire_multi expire_multi; -}; - -/* autofs v5 common packet struct */ -struct autofs_v5_packet { - struct autofs_packet_hdr hdr; - autofs_wqt_t wait_queue_token; - __u32 dev; - __u64 ino; - __u32 uid; - __u32 gid; - __u32 pid; - __u32 tgid; - __u32 len; - char name[NAME_MAX+1]; -}; - -typedef struct autofs_v5_packet autofs_packet_missing_indirect_t; -typedef struct autofs_v5_packet autofs_packet_expire_indirect_t; -typedef struct autofs_v5_packet autofs_packet_missing_direct_t; -typedef struct autofs_v5_packet autofs_packet_expire_direct_t; - -union autofs_v5_packet_union { - struct autofs_packet_hdr hdr; - struct autofs_v5_packet v5_packet; - autofs_packet_missing_indirect_t missing_indirect; - autofs_packet_expire_indirect_t expire_indirect; - autofs_packet_missing_direct_t missing_direct; - autofs_packet_expire_direct_t expire_direct; -}; - -#define AUTOFS_IOC_EXPIRE_MULTI _IOW(0x93,0x66,int) -#define AUTOFS_IOC_EXPIRE_INDIRECT AUTOFS_IOC_EXPIRE_MULTI -#define AUTOFS_IOC_EXPIRE_DIRECT AUTOFS_IOC_EXPIRE_MULTI -#define AUTOFS_IOC_PROTOSUBVER _IOR(0x93,0x67,int) -#define AUTOFS_IOC_ASKUMOUNT _IOR(0x93,0x70,int) - - -#endif /* _LINUX_AUTO_FS4_H */ diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h index f3b5d4e3a2ac..669fef5c745a 100644 --- a/include/linux/auxvec.h +++ b/include/linux/auxvec.h @@ -1,39 +1,8 @@ #ifndef _LINUX_AUXVEC_H #define _LINUX_AUXVEC_H -#include +#include -/* Symbolic values for the entries in the auxiliary table - put on the initial stack */ -#define AT_NULL 0 /* end of vector */ -#define AT_IGNORE 1 /* entry should be ignored */ -#define AT_EXECFD 2 /* file descriptor of program */ -#define AT_PHDR 3 /* program headers for program */ -#define AT_PHENT 4 /* size of program header entry */ -#define AT_PHNUM 5 /* number of program headers */ -#define AT_PAGESZ 6 /* system page size */ -#define AT_BASE 7 /* base address of interpreter */ -#define AT_FLAGS 8 /* flags */ -#define AT_ENTRY 9 /* entry point of program */ -#define AT_NOTELF 10 /* program is not ELF */ -#define AT_UID 11 /* real uid */ -#define AT_EUID 12 /* effective uid */ -#define AT_GID 13 /* real gid */ -#define AT_EGID 14 /* effective gid */ -#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ -#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ -#define AT_CLKTCK 17 /* frequency at which times() increments */ -/* AT_* values 18 through 22 are reserved */ -#define AT_SECURE 23 /* secure mode boolean */ -#define AT_BASE_PLATFORM 24 /* string identifying real platform, may - * differ from AT_PLATFORM. */ -#define AT_RANDOM 25 /* address of 16 random bytes */ - -#define AT_EXECFN 31 /* filename of program */ - -#ifdef __KERNEL__ #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */ /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */ -#endif - #endif /* _LINUX_AUXVEC_H */ diff --git a/include/linux/ax25.h b/include/linux/ax25.h deleted file mode 100644 index 74c89a41732d..000000000000 --- a/include/linux/ax25.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * These are the public elements of the Linux kernel AX.25 code. A similar - * file netrom.h exists for the NET/ROM protocol. - */ - -#ifndef AX25_KERNEL_H -#define AX25_KERNEL_H - -#include - -#define AX25_MTU 256 -#define AX25_MAX_DIGIS 8 - -#define AX25_WINDOW 1 -#define AX25_T1 2 -#define AX25_N2 3 -#define AX25_T3 4 -#define AX25_T2 5 -#define AX25_BACKOFF 6 -#define AX25_EXTSEQ 7 -#define AX25_PIDINCL 8 -#define AX25_IDLE 9 -#define AX25_PACLEN 10 -#define AX25_IAMDIGI 12 - -#define AX25_KILL 99 - -#define SIOCAX25GETUID (SIOCPROTOPRIVATE+0) -#define SIOCAX25ADDUID (SIOCPROTOPRIVATE+1) -#define SIOCAX25DELUID (SIOCPROTOPRIVATE+2) -#define SIOCAX25NOUID (SIOCPROTOPRIVATE+3) -#define SIOCAX25OPTRT (SIOCPROTOPRIVATE+7) -#define SIOCAX25CTLCON (SIOCPROTOPRIVATE+8) -#define SIOCAX25GETINFOOLD (SIOCPROTOPRIVATE+9) -#define SIOCAX25ADDFWD (SIOCPROTOPRIVATE+10) -#define SIOCAX25DELFWD (SIOCPROTOPRIVATE+11) -#define SIOCAX25DEVCTL (SIOCPROTOPRIVATE+12) -#define SIOCAX25GETINFO (SIOCPROTOPRIVATE+13) - -#define AX25_SET_RT_IPMODE 2 - -#define AX25_NOUID_DEFAULT 0 -#define AX25_NOUID_BLOCK 1 - -typedef struct { - char ax25_call[7]; /* 6 call + SSID (shifted ascii!) */ -} ax25_address; - -struct sockaddr_ax25 { - __kernel_sa_family_t sax25_family; - ax25_address sax25_call; - int sax25_ndigis; - /* Digipeater ax25_address sets follow */ -}; - -#define sax25_uid sax25_ndigis - -struct full_sockaddr_ax25 { - struct sockaddr_ax25 fsa_ax25; - ax25_address fsa_digipeater[AX25_MAX_DIGIS]; -}; - -struct ax25_routes_struct { - ax25_address port_addr; - ax25_address dest_addr; - unsigned char digi_count; - ax25_address digi_addr[AX25_MAX_DIGIS]; -}; - -struct ax25_route_opt_struct { - ax25_address port_addr; - ax25_address dest_addr; - int cmd; - int arg; -}; - -struct ax25_ctl_struct { - ax25_address port_addr; - ax25_address source_addr; - ax25_address dest_addr; - unsigned int cmd; - unsigned long arg; - unsigned char digi_count; - ax25_address digi_addr[AX25_MAX_DIGIS]; -}; - -/* this will go away. Please do not export to user land */ -struct ax25_info_struct_deprecated { - unsigned int n2, n2count; - unsigned int t1, t1timer; - unsigned int t2, t2timer; - unsigned int t3, t3timer; - unsigned int idle, idletimer; - unsigned int state; - unsigned int rcv_q, snd_q; -}; - -struct ax25_info_struct { - unsigned int n2, n2count; - unsigned int t1, t1timer; - unsigned int t2, t2timer; - unsigned int t3, t3timer; - unsigned int idle, idletimer; - unsigned int state; - unsigned int rcv_q, snd_q; - unsigned int vs, vr, va, vs_max; - unsigned int paclen; - unsigned int window; -}; - -struct ax25_fwd_struct { - ax25_address port_from; - ax25_address port_to; -}; - -#endif diff --git a/include/linux/b1lli.h b/include/linux/b1lli.h deleted file mode 100644 index 713f712685d3..000000000000 --- a/include/linux/b1lli.h +++ /dev/null @@ -1,73 +0,0 @@ -/* $Id: b1lli.h,v 1.8.8.3 2001/09/23 22:25:05 kai Exp $ - * - * ISDN lowlevel-module for AVM B1-card. - * - * Copyright 1996 by Carsten Paeth (calle@calle.in-berlin.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _B1LLI_H_ -#define _B1LLI_H_ -/* - * struct for loading t4 file - */ -typedef struct avmb1_t4file { - int len; - unsigned char *data; -} avmb1_t4file; - -typedef struct avmb1_loaddef { - int contr; - avmb1_t4file t4file; -} avmb1_loaddef; - -typedef struct avmb1_loadandconfigdef { - int contr; - avmb1_t4file t4file; - avmb1_t4file t4config; -} avmb1_loadandconfigdef; - -typedef struct avmb1_resetdef { - int contr; -} avmb1_resetdef; - -typedef struct avmb1_getdef { - int contr; - int cardtype; - int cardstate; -} avmb1_getdef; - -/* - * struct for adding new cards - */ -typedef struct avmb1_carddef { - int port; - int irq; -} avmb1_carddef; - -#define AVM_CARDTYPE_B1 0 -#define AVM_CARDTYPE_T1 1 -#define AVM_CARDTYPE_M1 2 -#define AVM_CARDTYPE_M2 3 - -typedef struct avmb1_extcarddef { - int port; - int irq; - int cardtype; - int cardnr; /* for HEMA/T1 */ -} avmb1_extcarddef; - -#define AVMB1_LOAD 0 /* load image to card */ -#define AVMB1_ADDCARD 1 /* add a new card - OBSOLETE */ -#define AVMB1_RESETCARD 2 /* reset a card */ -#define AVMB1_LOAD_AND_CONFIG 3 /* load image and config to card */ -#define AVMB1_ADDCARD_WITH_TYPE 4 /* add a new card, with cardtype */ -#define AVMB1_GET_CARDINFO 5 /* get cardtype */ -#define AVMB1_REMOVECARD 6 /* remove a card - OBSOLETE */ - -#define AVMB1_REGISTERCARD_IS_OBSOLETE - -#endif /* _B1LLI_H_ */ diff --git a/include/linux/baycom.h b/include/linux/baycom.h deleted file mode 100644 index 81249e029dad..000000000000 --- a/include/linux/baycom.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * The Linux BAYCOM driver for the Baycom serial 1200 baud modem - * and the parallel 9600 baud modem - * (C) 1997-1998 by Thomas Sailer, HB9JNX/AE4WA - */ - -#ifndef _BAYCOM_H -#define _BAYCOM_H - -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct baycom_debug_data { - unsigned long debug1; - unsigned long debug2; - long debug3; -}; - -struct baycom_ioctl { - int cmd; - union { - struct baycom_debug_data dbg; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values change for baycom - */ -#define BAYCOMCTL_GETDEBUG 0x92 - -/* -------------------------------------------------------------------- */ - -#endif /* _BAYCOM_H */ - -/* --------------------------------------------------------------------- */ diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h deleted file mode 100644 index 1c0b355aa515..000000000000 --- a/include/linux/bfs_fs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * include/linux/bfs_fs.h - BFS data structures on disk. - * Copyright (C) 1999 Tigran Aivazian - */ - -#ifndef _LINUX_BFS_FS_H -#define _LINUX_BFS_FS_H - -#include - -#define BFS_BSIZE_BITS 9 -#define BFS_BSIZE (1<i_vtype) */ -#define BFS_VDIR 2L -#define BFS_VREG 1L - -/* BFS inode layout on disk */ -struct bfs_inode { - __le16 i_ino; - __u16 i_unused; - __le32 i_sblock; - __le32 i_eblock; - __le32 i_eoffset; - __le32 i_vtype; - __le32 i_mode; - __le32 i_uid; - __le32 i_gid; - __le32 i_nlink; - __le32 i_atime; - __le32 i_mtime; - __le32 i_ctime; - __u32 i_padding[4]; -}; - -#define BFS_NAMELEN 14 -#define BFS_DIRENT_SIZE 16 -#define BFS_DIRS_PER_BLOCK 32 - -struct bfs_dirent { - __le16 ino; - char name[BFS_NAMELEN]; -}; - -/* BFS superblock layout on disk */ -struct bfs_super_block { - __le32 s_magic; - __le32 s_start; - __le32 s_end; - __le32 s_from; - __le32 s_to; - __s32 s_bfrom; - __s32 s_bto; - char s_fsname[6]; - char s_volume[6]; - __u32 s_padding[118]; -}; - - -#define BFS_OFF2INO(offset) \ - ((((offset) - BFS_BSIZE) / sizeof(struct bfs_inode)) + BFS_ROOT_INO) - -#define BFS_INO2OFF(ino) \ - ((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE) -#define BFS_NZFILESIZE(ip) \ - ((le32_to_cpu((ip)->i_eoffset) + 1) - le32_to_cpu((ip)->i_sblock) * BFS_BSIZE) - -#define BFS_FILESIZE(ip) \ - ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip)) - -#define BFS_FILEBLOCKS(ip) \ - ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) - le32_to_cpu((ip)->i_sblock)) -#define BFS_UNCLEAN(bfs_sb, sb) \ - ((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY)) - - -#endif /* _LINUX_BFS_FS_H */ diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 26531f32bbb2..cfcc6bfcaec0 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -1,26 +1,10 @@ #ifndef _LINUX_BINFMTS_H #define _LINUX_BINFMTS_H -#include - -struct pt_regs; - -/* - * These are the maximum length and maximum number of strings passed to the - * execve() system call. MAX_ARG_STRLEN is essentially random but serves to - * prevent the kernel from being unduly impacted by misaddressed pointers. - * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer. - */ -#define MAX_ARG_STRLEN (PAGE_SIZE * 32) -#define MAX_ARG_STRINGS 0x7FFFFFFF - -/* sizeof(linux_binprm->buf) */ -#define BINPRM_BUF_SIZE 128 - -#ifdef __KERNEL__ #include #include #include +#include #define CORENAME_MAX_SIZE 128 @@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *); extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn; #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_BINFMTS_H */ diff --git a/include/linux/blkpg.h b/include/linux/blkpg.h deleted file mode 100644 index a8519446c111..000000000000 --- a/include/linux/blkpg.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _LINUX_BLKPG_H -#define _LINUX_BLKPG_H - -/* - * Partition table and disk geometry handling - * - * A single ioctl with lots of subfunctions: - * - * Device number stuff: - * get_whole_disk() (given the device number of a partition, - * find the device number of the encompassing disk) - * get_all_partitions() (given the device number of a disk, return the - * device numbers of all its known partitions) - * - * Partition stuff: - * add_partition() - * delete_partition() - * test_partition_in_use() (also for test_disk_in_use) - * - * Geometry stuff: - * get_geometry() - * set_geometry() - * get_bios_drivedata() - * - * For today, only the partition stuff - aeb, 990515 - */ -#include -#include - -#define BLKPG _IO(0x12,105) - -/* The argument structure */ -struct blkpg_ioctl_arg { - int op; - int flags; - int datalen; - void __user *data; -}; - -/* The subfunctions (for the op field) */ -#define BLKPG_ADD_PARTITION 1 -#define BLKPG_DEL_PARTITION 2 -#define BLKPG_RESIZE_PARTITION 3 - -/* Sizes of name fields. Unused at present. */ -#define BLKPG_DEVNAMELTH 64 -#define BLKPG_VOLNAMELTH 64 - -/* The data structure for ADD_PARTITION and DEL_PARTITION */ -struct blkpg_partition { - long long start; /* starting offset in bytes */ - long long length; /* length in bytes */ - int pno; /* partition number */ - char devname[BLKPG_DEVNAMELTH]; /* partition name, like sda5 or c0d1p2, - to be used in kernel messages */ - char volname[BLKPG_VOLNAMELTH]; /* volume label */ -}; - -#endif /* _LINUX_BLKPG_H */ diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 4d1a0748eaf8..7c2e030e72f1 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -1,150 +1,11 @@ #ifndef BLKTRACE_H #define BLKTRACE_H -#include -#ifdef __KERNEL__ #include #include #include -#endif - -/* - * Trace categories - */ -enum blktrace_cat { - BLK_TC_READ = 1 << 0, /* reads */ - BLK_TC_WRITE = 1 << 1, /* writes */ - BLK_TC_FLUSH = 1 << 2, /* flush */ - BLK_TC_SYNC = 1 << 3, /* sync IO */ - BLK_TC_SYNCIO = BLK_TC_SYNC, - BLK_TC_QUEUE = 1 << 4, /* queueing/merging */ - BLK_TC_REQUEUE = 1 << 5, /* requeueing */ - BLK_TC_ISSUE = 1 << 6, /* issue */ - BLK_TC_COMPLETE = 1 << 7, /* completions */ - BLK_TC_FS = 1 << 8, /* fs requests */ - BLK_TC_PC = 1 << 9, /* pc requests */ - BLK_TC_NOTIFY = 1 << 10, /* special message */ - BLK_TC_AHEAD = 1 << 11, /* readahead */ - BLK_TC_META = 1 << 12, /* metadata */ - BLK_TC_DISCARD = 1 << 13, /* discard requests */ - BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */ - BLK_TC_FUA = 1 << 15, /* fua requests */ - - BLK_TC_END = 1 << 15, /* we've run out of bits! */ -}; - -#define BLK_TC_SHIFT (16) -#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT) - -/* - * Basic trace actions - */ -enum blktrace_act { - __BLK_TA_QUEUE = 1, /* queued */ - __BLK_TA_BACKMERGE, /* back merged to existing rq */ - __BLK_TA_FRONTMERGE, /* front merge to existing rq */ - __BLK_TA_GETRQ, /* allocated new request */ - __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */ - __BLK_TA_REQUEUE, /* request requeued */ - __BLK_TA_ISSUE, /* sent to driver */ - __BLK_TA_COMPLETE, /* completed by driver */ - __BLK_TA_PLUG, /* queue was plugged */ - __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */ - __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */ - __BLK_TA_INSERT, /* insert request */ - __BLK_TA_SPLIT, /* bio was split */ - __BLK_TA_BOUNCE, /* bio was bounced */ - __BLK_TA_REMAP, /* bio was remapped */ - __BLK_TA_ABORT, /* request aborted */ - __BLK_TA_DRV_DATA, /* driver-specific binary data */ -}; - -/* - * Notify events. - */ -enum blktrace_notify { - __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ - __BLK_TN_TIMESTAMP, /* include system clock */ - __BLK_TN_MESSAGE, /* Character string message */ -}; - - -/* - * Trace actions in full. Additionally, read or write is masked - */ -#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE)) -#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE)) -#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE)) -#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SPLIT (__BLK_TA_SPLIT) -#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE) -#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA)) - -#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY)) - -#define BLK_IO_TRACE_MAGIC 0x65617400 -#define BLK_IO_TRACE_VERSION 0x07 - -/* - * The trace itself - */ -struct blk_io_trace { - __u32 magic; /* MAGIC << 8 | version */ - __u32 sequence; /* event number */ - __u64 time; /* in microseconds */ - __u64 sector; /* disk offset */ - __u32 bytes; /* transfer length */ - __u32 action; /* what happened */ - __u32 pid; /* who did it */ - __u32 device; /* device number */ - __u32 cpu; /* on what cpu did it happen */ - __u16 error; /* completion error */ - __u16 pdu_len; /* length of data after this trace */ -}; - -/* - * The remap event - */ -struct blk_io_trace_remap { - __be32 device_from; - __be32 device_to; - __be64 sector_from; -}; - -enum { - Blktrace_setup = 1, - Blktrace_running, - Blktrace_stopped, -}; - -#define BLKTRACE_BDEV_SIZE 32 - -/* - * User setup structure passed with BLKTRACESTART - */ -struct blk_user_trace_setup { - char name[BLKTRACE_BDEV_SIZE]; /* output */ - __u16 act_mask; /* input */ - __u32 buf_size; /* input */ - __u32 buf_nr; /* input */ - __u64 start_lba; - __u64 end_lba; - __u32 pid; -}; +#include -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_IO_TRACE) #include @@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes); #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/bpqether.h b/include/linux/bpqether.h deleted file mode 100644 index a6c35e1a89ad..000000000000 --- a/include/linux/bpqether.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef __BPQETHER_H -#define __BPQETHER_H - -/* - * Defines for the BPQETHER pseudo device driver - */ - -#ifndef __LINUX_IF_ETHER_H -#include -#endif - -#define SIOCSBPQETHOPT (SIOCDEVPRIVATE+0) /* reserved */ -#define SIOCSBPQETHADDR (SIOCDEVPRIVATE+1) - -struct bpq_ethaddr { - unsigned char destination[ETH_ALEN]; - unsigned char accept[ETH_ALEN]; -}; - -/* - * For SIOCSBPQETHOPT - this is compatible with PI2/PacketTwin card drivers, - * currently not implemented, though. If someone wants to hook a radio - * to his Ethernet card he may find this useful. ;-) - */ - -#define SIOCGBPQETHPARAM 0x5000 /* get Level 1 parameters */ -#define SIOCSBPQETHPARAM 0x5001 /* set */ - -struct bpq_req { - int cmd; - int speed; /* unused */ - int clockmode; /* unused */ - int txdelay; - unsigned char persist; /* unused */ - int slotime; /* unused */ - int squeldelay; - int dmachan; /* unused */ - int irq; /* unused */ -}; - -#endif diff --git a/include/linux/bsg.h b/include/linux/bsg.h index ecb4730d0868..7173f6e9d2dd 100644 --- a/include/linux/bsg.h +++ b/include/linux/bsg.h @@ -1,67 +1,8 @@ #ifndef BSG_H #define BSG_H -#include +#include -#define BSG_PROTOCOL_SCSI 0 - -#define BSG_SUB_PROTOCOL_SCSI_CMD 0 -#define BSG_SUB_PROTOCOL_SCSI_TMF 1 -#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 - -/* - * For flags member below - * sg.h sg_io_hdr also has bits defined for it's flags member. However - * none of these bits are implemented/used by bsg. The bits below are - * allocated to not conflict with sg.h ones anyway. - */ -#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */ - -struct sg_io_v4 { - __s32 guard; /* [i] 'Q' to differentiate from v3 */ - __u32 protocol; /* [i] 0 -> SCSI , .... */ - __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task - management function, .... */ - - __u32 request_len; /* [i] in bytes */ - __u64 request; /* [i], [*i] {SCSI: cdb} */ - __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */ - __u32 request_attr; /* [i] {SCSI: task attribute} */ - __u32 request_priority; /* [i] {SCSI: task priority} */ - __u32 request_extra; /* [i] {spare, for padding} */ - __u32 max_response_len; /* [i] in bytes */ - __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */ - - /* "dout_": data out (to device); "din_": data in (from device) */ - __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else - dout_xfer points to array of iovec */ - __u32 dout_xfer_len; /* [i] bytes to be transferred to device */ - __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */ - __u32 din_xfer_len; /* [i] bytes to be transferred from device */ - __u64 dout_xferp; /* [i], [*i] */ - __u64 din_xferp; /* [i], [*o] */ - - __u32 timeout; /* [i] units: millisecond */ - __u32 flags; /* [i] bit mask */ - __u64 usr_ptr; /* [i->o] unused internally */ - __u32 spare_in; /* [i] */ - - __u32 driver_status; /* [o] 0 -> ok */ - __u32 transport_status; /* [o] 0 -> ok */ - __u32 device_status; /* [o] {SCSI: command completion status} */ - __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */ - __u32 info; /* [o] additional information */ - __u32 duration; /* [o] time to complete, in milliseconds */ - __u32 response_len; /* [o] bytes of response actually written */ - __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */ - __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */ - __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */ - __u32 spare_out; /* [o] */ - - __u32 padding; -}; - -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device { @@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q) } #endif -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/can.h b/include/linux/can.h deleted file mode 100644 index e52958d7c2d1..000000000000 --- a/include/linux/can.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * linux/can.h - * - * Definitions for CAN network layer (socket addr / CAN frame / CAN filter) - * - * Authors: Oliver Hartkopp - * Urs Thuermann - * Copyright (c) 2002-2007 Volkswagen Group Electronic Research - * All rights reserved. - * - */ - -#ifndef CAN_H -#define CAN_H - -#include -#include - -/* controller area network (CAN) kernel definitions */ - -/* special address description flags for the CAN_ID */ -#define CAN_EFF_FLAG 0x80000000U /* EFF/SFF is set in the MSB */ -#define CAN_RTR_FLAG 0x40000000U /* remote transmission request */ -#define CAN_ERR_FLAG 0x20000000U /* error message frame */ - -/* valid bits in CAN ID for frame formats */ -#define CAN_SFF_MASK 0x000007FFU /* standard frame format (SFF) */ -#define CAN_EFF_MASK 0x1FFFFFFFU /* extended frame format (EFF) */ -#define CAN_ERR_MASK 0x1FFFFFFFU /* omit EFF, RTR, ERR flags */ - -/* - * Controller Area Network Identifier structure - * - * bit 0-28 : CAN identifier (11/29 bit) - * bit 29 : error message frame flag (0 = data frame, 1 = error message) - * bit 30 : remote transmission request flag (1 = rtr frame) - * bit 31 : frame format flag (0 = standard 11 bit, 1 = extended 29 bit) - */ -typedef __u32 canid_t; - -#define CAN_SFF_ID_BITS 11 -#define CAN_EFF_ID_BITS 29 - -/* - * Controller Area Network Error Message Frame Mask structure - * - * bit 0-28 : error class mask (see include/linux/can/error.h) - * bit 29-31 : set to zero - */ -typedef __u32 can_err_mask_t; - -/* CAN payload length and DLC definitions according to ISO 11898-1 */ -#define CAN_MAX_DLC 8 -#define CAN_MAX_DLEN 8 - -/* CAN FD payload length and DLC definitions according to ISO 11898-7 */ -#define CANFD_MAX_DLC 15 -#define CANFD_MAX_DLEN 64 - -/** - * struct can_frame - basic CAN frame structure - * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition - * @can_dlc: frame payload length in byte (0 .. 8) aka data length code - * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1 - * mapping of the 'data length code' to the real payload length - * @data: CAN frame payload (up to 8 byte) - */ -struct can_frame { - canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */ - __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8))); -}; - -/* - * defined bits for canfd_frame.flags - * - * The use of struct canfd_frame implies the Extended Data Length (EDL) bit to - * be set in the CAN frame bitstream on the wire. The EDL bit switch turns - * the CAN controllers bitstream processor into the CAN FD mode which creates - * two new options within the CAN FD frame specification: - * - * Bit Rate Switch - to indicate a second bitrate is/was used for the payload - * Error State Indicator - represents the error state of the transmitting node - * - * As the CANFD_ESI bit is internally generated by the transmitting CAN - * controller only the CANFD_BRS bit is relevant for real CAN controllers when - * building a CAN FD frame for transmission. Setting the CANFD_ESI bit can make - * sense for virtual CAN interfaces to test applications with echoed frames. - */ -#define CANFD_BRS 0x01 /* bit rate switch (second bitrate for payload data) */ -#define CANFD_ESI 0x02 /* error state indicator of the transmitting node */ - -/** - * struct canfd_frame - CAN flexible data rate frame structure - * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition - * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN) - * @flags: additional flags for CAN FD - * @__res0: reserved / padding - * @__res1: reserved / padding - * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte) - */ -struct canfd_frame { - canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 len; /* frame payload length in byte */ - __u8 flags; /* additional flags for CAN FD */ - __u8 __res0; /* reserved / padding */ - __u8 __res1; /* reserved / padding */ - __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8))); -}; - -#define CAN_MTU (sizeof(struct can_frame)) -#define CANFD_MTU (sizeof(struct canfd_frame)) - -/* particular protocols of the protocol family PF_CAN */ -#define CAN_RAW 1 /* RAW sockets */ -#define CAN_BCM 2 /* Broadcast Manager */ -#define CAN_TP16 3 /* VAG Transport Protocol v1.6 */ -#define CAN_TP20 4 /* VAG Transport Protocol v2.0 */ -#define CAN_MCNET 5 /* Bosch MCNet */ -#define CAN_ISOTP 6 /* ISO 15765-2 Transport Protocol */ -#define CAN_NPROTO 7 - -#define SOL_CAN_BASE 100 - -/** - * struct sockaddr_can - the sockaddr structure for CAN sockets - * @can_family: address family number AF_CAN. - * @can_ifindex: CAN network interface index. - * @can_addr: protocol specific address information - */ -struct sockaddr_can { - __kernel_sa_family_t can_family; - int can_ifindex; - union { - /* transport protocol class address information (e.g. ISOTP) */ - struct { canid_t rx_id, tx_id; } tp; - - /* reserved for future CAN protocols address information */ - } can_addr; -}; - -/** - * struct can_filter - CAN ID based filter in can_register(). - * @can_id: relevant bits of CAN ID which are not masked out. - * @can_mask: CAN mask (see description) - * - * Description: - * A filter matches, when - * - * & mask == can_id & mask - * - * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can - * filter for error message frames (CAN_ERR_FLAG bit set in mask). - */ -struct can_filter { - canid_t can_id; - canid_t can_mask; -}; - -#define CAN_INV_FILTER 0x20000000U /* to be set in can_filter.can_id */ - -#endif /* CAN_H */ diff --git a/include/linux/capability.h b/include/linux/capability.h index d10b7ed595b1..98503b792369 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -9,82 +9,11 @@ * * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ */ - #ifndef _LINUX_CAPABILITY_H #define _LINUX_CAPABILITY_H -#include - -struct task_struct; - -/* User-level do most of the mapping between kernel and user - capabilities based on the version tag given by the kernel. The - kernel might be somewhat backwards compatible, but don't bet on - it. */ - -/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to - a set of three capability sets. The transposition of 3*the - following structure to such a composite is better handled in a user - library since the draft standard requires the use of malloc/free - etc.. */ - -#define _LINUX_CAPABILITY_VERSION_1 0x19980330 -#define _LINUX_CAPABILITY_U32S_1 1 - -#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ -#define _LINUX_CAPABILITY_U32S_2 2 - -#define _LINUX_CAPABILITY_VERSION_3 0x20080522 -#define _LINUX_CAPABILITY_U32S_3 2 - -typedef struct __user_cap_header_struct { - __u32 version; - int pid; -} __user *cap_user_header_t; - -typedef struct __user_cap_data_struct { - __u32 effective; - __u32 permitted; - __u32 inheritable; -} __user *cap_user_data_t; - - -#define VFS_CAP_REVISION_MASK 0xFF000000 -#define VFS_CAP_REVISION_SHIFT 24 -#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK -#define VFS_CAP_FLAGS_EFFECTIVE 0x000001 - -#define VFS_CAP_REVISION_1 0x01000000 -#define VFS_CAP_U32_1 1 -#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1)) - -#define VFS_CAP_REVISION_2 0x02000000 -#define VFS_CAP_U32_2 2 -#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2)) +#include -#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2 -#define VFS_CAP_U32 VFS_CAP_U32_2 -#define VFS_CAP_REVISION VFS_CAP_REVISION_2 - -struct vfs_cap_data { - __le32 magic_etc; /* Little endian */ - struct { - __le32 permitted; /* Little endian */ - __le32 inheritable; /* Little endian */ - } data[VFS_CAP_U32]; -}; - -#ifndef __KERNEL__ - -/* - * Backwardly compatible definition for source code - trapped in a - * 32-bit world. If you find you need this, please consider using - * libcap to untrap yourself... - */ -#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 -#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 - -#else #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 #define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 @@ -105,277 +34,6 @@ struct cpu_vfs_cap_data { #define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct)) #define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t)) -#endif - - -/** - ** POSIX-draft defined capabilities. - **/ - -/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this - overrides the restriction of changing file ownership and group - ownership. */ - -#define CAP_CHOWN 0 - -/* Override all DAC access, including ACL execute access if - [_POSIX_ACL] is defined. Excluding DAC access covered by - CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_OVERRIDE 1 - -/* Overrides all DAC restrictions regarding read and search on files - and directories, including ACL restrictions if [_POSIX_ACL] is - defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_READ_SEARCH 2 - -/* Overrides all restrictions about allowed operations on files, where - file owner ID must be equal to the user ID, except where CAP_FSETID - is applicable. It doesn't override MAC and DAC restrictions. */ - -#define CAP_FOWNER 3 - -/* Overrides the following restrictions that the effective user ID - shall match the file owner ID when setting the S_ISUID and S_ISGID - bits on that file; that the effective group ID (or one of the - supplementary group IDs) shall match the file owner ID when setting - the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are - cleared on successful return from chown(2) (not implemented). */ - -#define CAP_FSETID 4 - -/* Overrides the restriction that the real or effective user ID of a - process sending a signal must match the real or effective user ID - of the process receiving the signal. */ - -#define CAP_KILL 5 - -/* Allows setgid(2) manipulation */ -/* Allows setgroups(2) */ -/* Allows forged gids on socket credentials passing. */ - -#define CAP_SETGID 6 - -/* Allows set*uid(2) manipulation (including fsuid). */ -/* Allows forged pids on socket credentials passing. */ - -#define CAP_SETUID 7 - - -/** - ** Linux-specific capabilities - **/ - -/* Without VFS support for capabilities: - * Transfer any capability in your permitted set to any pid, - * remove any capability in your permitted set from any pid - * With VFS support for capabilities (neither of above, but) - * Add any capability from current's capability bounding set - * to the current process' inheritable set - * Allow taking bits out of capability bounding set - * Allow modification of the securebits for a process - */ - -#define CAP_SETPCAP 8 - -/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */ - -#define CAP_LINUX_IMMUTABLE 9 - -/* Allows binding to TCP/UDP sockets below 1024 */ -/* Allows binding to ATM VCIs below 32 */ - -#define CAP_NET_BIND_SERVICE 10 - -/* Allow broadcasting, listen to multicast */ - -#define CAP_NET_BROADCAST 11 - -/* Allow interface configuration */ -/* Allow administration of IP firewall, masquerading and accounting */ -/* Allow setting debug option on sockets */ -/* Allow modification of routing tables */ -/* Allow setting arbitrary process / process group ownership on - sockets */ -/* Allow binding to any address for transparent proxying (also via NET_RAW) */ -/* Allow setting TOS (type of service) */ -/* Allow setting promiscuous mode */ -/* Allow clearing driver statistics */ -/* Allow multicasting */ -/* Allow read/write of device-specific registers */ -/* Allow activation of ATM control sockets */ - -#define CAP_NET_ADMIN 12 - -/* Allow use of RAW sockets */ -/* Allow use of PACKET sockets */ -/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ - -#define CAP_NET_RAW 13 - -/* Allow locking of shared memory segments */ -/* Allow mlock and mlockall (which doesn't really have anything to do - with IPC) */ - -#define CAP_IPC_LOCK 14 - -/* Override IPC ownership checks */ - -#define CAP_IPC_OWNER 15 - -/* Insert and remove kernel modules - modify kernel without limit */ -#define CAP_SYS_MODULE 16 - -/* Allow ioperm/iopl access */ -/* Allow sending USB messages to any device via /proc/bus/usb */ - -#define CAP_SYS_RAWIO 17 - -/* Allow use of chroot() */ - -#define CAP_SYS_CHROOT 18 - -/* Allow ptrace() of any process */ - -#define CAP_SYS_PTRACE 19 - -/* Allow configuration of process accounting */ - -#define CAP_SYS_PACCT 20 - -/* Allow configuration of the secure attention key */ -/* Allow administration of the random device */ -/* Allow examination and configuration of disk quotas */ -/* Allow setting the domainname */ -/* Allow setting the hostname */ -/* Allow calling bdflush() */ -/* Allow mount() and umount(), setting up new smb connection */ -/* Allow some autofs root ioctls */ -/* Allow nfsservctl */ -/* Allow VM86_REQUEST_IRQ */ -/* Allow to read/write pci config on alpha */ -/* Allow irix_prctl on mips (setstacksize) */ -/* Allow flushing all cache on m68k (sys_cacheflush) */ -/* Allow removing semaphores */ -/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores - and shared memory */ -/* Allow locking/unlocking of shared memory segment */ -/* Allow turning swap on/off */ -/* Allow forged pids on socket credentials passing */ -/* Allow setting readahead and flushing buffers on block devices */ -/* Allow setting geometry in floppy driver */ -/* Allow turning DMA on/off in xd driver */ -/* Allow administration of md devices (mostly the above, but some - extra ioctls) */ -/* Allow tuning the ide driver */ -/* Allow access to the nvram device */ -/* Allow administration of apm_bios, serial and bttv (TV) device */ -/* Allow manufacturer commands in isdn CAPI support driver */ -/* Allow reading non-standardized portions of pci configuration space */ -/* Allow DDI debug ioctl on sbpcd driver */ -/* Allow setting up serial ports */ -/* Allow sending raw qic-117 commands */ -/* Allow enabling/disabling tagged queuing on SCSI controllers and sending - arbitrary SCSI commands */ -/* Allow setting encryption key on loopback filesystem */ -/* Allow setting zone reclaim policy */ - -#define CAP_SYS_ADMIN 21 - -/* Allow use of reboot() */ - -#define CAP_SYS_BOOT 22 - -/* Allow raising priority and setting priority on other (different - UID) processes */ -/* Allow use of FIFO and round-robin (realtime) scheduling on own - processes and setting the scheduling algorithm used by another - process. */ -/* Allow setting cpu affinity on other processes */ - -#define CAP_SYS_NICE 23 - -/* Override resource limits. Set resource limits. */ -/* Override quota limits. */ -/* Override reserved space on ext2 filesystem */ -/* Modify data journaling mode on ext3 filesystem (uses journaling - resources) */ -/* NOTE: ext2 honors fsuid when checking for resource overrides, so - you can override using fsuid too */ -/* Override size restrictions on IPC message queues */ -/* Allow more than 64hz interrupts from the real-time clock */ -/* Override max number of consoles on console allocation */ -/* Override max number of keymaps */ - -#define CAP_SYS_RESOURCE 24 - -/* Allow manipulation of system clock */ -/* Allow irix_stime on mips */ -/* Allow setting the real-time clock */ - -#define CAP_SYS_TIME 25 - -/* Allow configuration of tty devices */ -/* Allow vhangup() of tty */ - -#define CAP_SYS_TTY_CONFIG 26 - -/* Allow the privileged aspects of mknod() */ - -#define CAP_MKNOD 27 - -/* Allow taking of leases on files */ - -#define CAP_LEASE 28 - -#define CAP_AUDIT_WRITE 29 - -#define CAP_AUDIT_CONTROL 30 - -#define CAP_SETFCAP 31 - -/* Override MAC access. - The base kernel enforces no MAC policy. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based overrides of that policy, this is - the capability it should use to do so. */ - -#define CAP_MAC_OVERRIDE 32 - -/* Allow MAC configuration or state changes. - The base kernel requires no MAC configuration. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based checks on modifications to that - policy or the data required to maintain it, this is the - capability it should use to do so. */ - -#define CAP_MAC_ADMIN 33 - -/* Allow configuring the kernel's syslog (printk behaviour) */ - -#define CAP_SYSLOG 34 - -/* Allow triggering something that will wake the system */ - -#define CAP_WAKE_ALARM 35 - -/* Allow preventing system suspends */ - -#define CAP_BLOCK_SUSPEND 36 - -#define CAP_LAST_CAP CAP_BLOCK_SUSPEND - -#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) - -/* - * Bit location of each capability (used by user-space library and kernel) - */ - -#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ -#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */ - -#ifdef __KERNEL__ struct inode; struct dentry; @@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); -#endif /* __KERNEL__ */ - #endif /* !_LINUX_CAPABILITY_H */ diff --git a/include/linux/capi.h b/include/linux/capi.h deleted file mode 100644 index 65100d6cb89b..000000000000 --- a/include/linux/capi.h +++ /dev/null @@ -1,133 +0,0 @@ -/* $Id: capi.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $ - * - * CAPI 2.0 Interface for Linux - * - * Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef __LINUX_CAPI_H__ -#define __LINUX_CAPI_H__ - -#include -#include -#ifndef __KERNEL__ -#include -#endif - -/* - * CAPI_REGISTER - */ - -typedef struct capi_register_params { /* CAPI_REGISTER */ - __u32 level3cnt; /* No. of simulatneous user data connections */ - __u32 datablkcnt; /* No. of buffered data messages */ - __u32 datablklen; /* Size of buffered data messages */ -} capi_register_params; - -#define CAPI_REGISTER _IOW('C',0x01,struct capi_register_params) - -/* - * CAPI_GET_MANUFACTURER - */ - -#define CAPI_MANUFACTURER_LEN 64 - -#define CAPI_GET_MANUFACTURER _IOWR('C',0x06,int) /* broken: wanted size 64 (CAPI_MANUFACTURER_LEN) */ - -/* - * CAPI_GET_VERSION - */ - -typedef struct capi_version { - __u32 majorversion; - __u32 minorversion; - __u32 majormanuversion; - __u32 minormanuversion; -} capi_version; - -#define CAPI_GET_VERSION _IOWR('C',0x07,struct capi_version) - -/* - * CAPI_GET_SERIAL - */ - -#define CAPI_SERIAL_LEN 8 -#define CAPI_GET_SERIAL _IOWR('C',0x08,int) /* broken: wanted size 8 (CAPI_SERIAL_LEN) */ - -/* - * CAPI_GET_PROFILE - */ - -typedef struct capi_profile { - __u16 ncontroller; /* number of installed controller */ - __u16 nbchannel; /* number of B-Channels */ - __u32 goptions; /* global options */ - __u32 support1; /* B1 protocols support */ - __u32 support2; /* B2 protocols support */ - __u32 support3; /* B3 protocols support */ - __u32 reserved[6]; /* reserved */ - __u32 manu[5]; /* manufacturer specific information */ -} capi_profile; - -#define CAPI_GET_PROFILE _IOWR('C',0x09,struct capi_profile) - -typedef struct capi_manufacturer_cmd { - unsigned long cmd; - void __user *data; -} capi_manufacturer_cmd; - -/* - * CAPI_MANUFACTURER_CMD - */ - -#define CAPI_MANUFACTURER_CMD _IOWR('C',0x20, struct capi_manufacturer_cmd) - -/* - * CAPI_GET_ERRCODE - * capi errcode is set, * if read, write, or ioctl returns EIO, - * ioctl returns errcode directly, and in arg, if != 0 - */ - -#define CAPI_GET_ERRCODE _IOR('C',0x21, __u16) - -/* - * CAPI_INSTALLED - */ -#define CAPI_INSTALLED _IOR('C',0x22, __u16) - - -/* - * member contr is input for - * CAPI_GET_MANUFACTURER, CAPI_VERSION, CAPI_GET_SERIAL - * and CAPI_GET_PROFILE - */ -typedef union capi_ioctl_struct { - __u32 contr; - capi_register_params rparams; - __u8 manufacturer[CAPI_MANUFACTURER_LEN]; - capi_version version; - __u8 serial[CAPI_SERIAL_LEN]; - capi_profile profile; - capi_manufacturer_cmd cmd; - __u16 errcode; -} capi_ioctl_struct; - -/* - * Middleware extension - */ - -#define CAPIFLAG_HIGHJACKING 0x0001 - -#define CAPI_GET_FLAGS _IOR('C',0x23, unsigned) -#define CAPI_SET_FLAGS _IOR('C',0x24, unsigned) -#define CAPI_CLR_FLAGS _IOR('C',0x25, unsigned) - -#define CAPI_NCCI_OPENCOUNT _IOR('C',0x26, unsigned) - -#define CAPI_NCCI_GETUNIT _IOR('C',0x27, unsigned) - -#endif /* __LINUX_CAPI_H__ */ diff --git a/include/linux/cciss_defs.h b/include/linux/cciss_defs.h deleted file mode 100644 index 316b670d4e33..000000000000 --- a/include/linux/cciss_defs.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef CCISS_DEFS_H -#define CCISS_DEFS_H - -#include - -/* general boundary definitions */ -#define SENSEINFOBYTES 32 /* note that this value may vary - between host implementations */ - -/* Command Status value */ -#define CMD_SUCCESS 0x0000 -#define CMD_TARGET_STATUS 0x0001 -#define CMD_DATA_UNDERRUN 0x0002 -#define CMD_DATA_OVERRUN 0x0003 -#define CMD_INVALID 0x0004 -#define CMD_PROTOCOL_ERR 0x0005 -#define CMD_HARDWARE_ERR 0x0006 -#define CMD_CONNECTION_LOST 0x0007 -#define CMD_ABORTED 0x0008 -#define CMD_ABORT_FAILED 0x0009 -#define CMD_UNSOLICITED_ABORT 0x000A -#define CMD_TIMEOUT 0x000B -#define CMD_UNABORTABLE 0x000C - -/* transfer direction */ -#define XFER_NONE 0x00 -#define XFER_WRITE 0x01 -#define XFER_READ 0x02 -#define XFER_RSVD 0x03 - -/* task attribute */ -#define ATTR_UNTAGGED 0x00 -#define ATTR_SIMPLE 0x04 -#define ATTR_HEADOFQUEUE 0x05 -#define ATTR_ORDERED 0x06 -#define ATTR_ACA 0x07 - -/* cdb type */ -#define TYPE_CMD 0x00 -#define TYPE_MSG 0x01 - -/* Type defs used in the following structs */ -#define BYTE __u8 -#define WORD __u16 -#define HWORD __u16 -#define DWORD __u32 - -#define CISS_MAX_LUN 1024 - -#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */ -#define LEVEL3LUN 0 - -#pragma pack(1) - -/* Command List Structure */ -typedef union _SCSI3Addr_struct { - struct { - BYTE Dev; - BYTE Bus:6; - BYTE Mode:2; /* b00 */ - } PeripDev; - struct { - BYTE DevLSB; - BYTE DevMSB:6; - BYTE Mode:2; /* b01 */ - } LogDev; - struct { - BYTE Dev:5; - BYTE Bus:3; - BYTE Targ:6; - BYTE Mode:2; /* b10 */ - } LogUnit; -} SCSI3Addr_struct; - -typedef struct _PhysDevAddr_struct { - DWORD TargetId:24; - DWORD Bus:6; - DWORD Mode:2; - SCSI3Addr_struct Target[2]; /* 2 level target device addr */ -} PhysDevAddr_struct; - -typedef struct _LogDevAddr_struct { - DWORD VolId:30; - DWORD Mode:2; - BYTE reserved[4]; -} LogDevAddr_struct; - -typedef union _LUNAddr_struct { - BYTE LunAddrBytes[8]; - SCSI3Addr_struct SCSI3Lun[4]; - PhysDevAddr_struct PhysDev; - LogDevAddr_struct LogDev; -} LUNAddr_struct; - -typedef struct _RequestBlock_struct { - BYTE CDBLen; - struct { - BYTE Type:3; - BYTE Attribute:3; - BYTE Direction:2; - } Type; - HWORD Timeout; - BYTE CDB[16]; -} RequestBlock_struct; - -typedef union _MoreErrInfo_struct{ - struct { - BYTE Reserved[3]; - BYTE Type; - DWORD ErrorInfo; - } Common_Info; - struct{ - BYTE Reserved[2]; - BYTE offense_size; /* size of offending entry */ - BYTE offense_num; /* byte # of offense 0-base */ - DWORD offense_value; - } Invalid_Cmd; -} MoreErrInfo_struct; -typedef struct _ErrorInfo_struct { - BYTE ScsiStatus; - BYTE SenseLen; - HWORD CommandStatus; - DWORD ResidualCnt; - MoreErrInfo_struct MoreErrInfo; - BYTE SenseInfo[SENSEINFOBYTES]; -} ErrorInfo_struct; - -#pragma pack() - -#endif /* CCISS_DEFS_H */ diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h index 986493f5b92b..84b6e2d0f44d 100644 --- a/include/linux/cciss_ioctl.h +++ b/include/linux/cciss_ioctl.h @@ -1,91 +1,8 @@ #ifndef CCISS_IOCTLH #define CCISS_IOCTLH -#include -#include -#include +#include -#define CCISS_IOC_MAGIC 'B' - - -typedef struct _cciss_pci_info_struct -{ - unsigned char bus; - unsigned char dev_fn; - unsigned short domain; - __u32 board_id; -} cciss_pci_info_struct; - -typedef struct _cciss_coalint_struct -{ - __u32 delay; - __u32 count; -} cciss_coalint_struct; - -typedef char NodeName_type[16]; - -typedef __u32 Heartbeat_type; - -#define CISS_PARSCSIU2 0x0001 -#define CISS_PARCSCIU3 0x0002 -#define CISS_FIBRE1G 0x0100 -#define CISS_FIBRE2G 0x0200 -typedef __u32 BusTypes_type; - -typedef char FirmwareVer_type[4]; -typedef __u32 DriverVer_type; - -#define MAX_KMALLOC_SIZE 128000 - -typedef struct _IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - WORD buf_size; /* size in bytes of the buf */ - BYTE __user *buf; -} IOCTL_Command_struct; - -typedef struct _BIG_IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */ - DWORD buf_size; /* size in bytes of the buf */ - /* < malloc_size * MAXSGENTRIES */ - BYTE __user *buf; -} BIG_IOCTL_Command_struct; - -typedef struct _LogvolInfo_struct{ - __u32 LunID; - int num_opens; /* number of opens on the logical volume */ - int num_parts; /* number of partitions configured on logvol */ -} LogvolInfo_struct; - -#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct) - -#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct) -#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct) - -#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type) -#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type) - -#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type) -#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type) -#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type) -#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type) -#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10) -#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct) -#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12) - -/* no longer used... use REGNEWD instead */ -#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int) - -#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14) -#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16) -#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct) -#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct) - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT /* 32 bit compatible ioctl structs */ @@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct { #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct) #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index dfd7f187c351..8609d577bb66 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -7,910 +7,12 @@ * 1997, 1998 Erik Andersen, andersee@debian.org * 1998-2002 Jens Axboe, axboe@suse.de */ - #ifndef _LINUX_CDROM_H #define _LINUX_CDROM_H -#include -#include - -/******************************************************* - * As of Linux 2.1.x, all Linux CD-ROM application programs will use this - * (and only this) include file. It is my hope to provide Linux with - * a uniform interface between software accessing CD-ROMs and the various - * device drivers that actually talk to the drives. There may still be - * 23 different kinds of strange CD-ROM drives, but at least there will - * now be one, and only one, Linux CD-ROM interface. - * - * Additionally, as of Linux 2.1.x, all Linux application programs - * should use the O_NONBLOCK option when opening a CD-ROM device - * for subsequent ioctl commands. This allows for neat system errors - * like "No medium found" or "Wrong medium type" upon attempting to - * mount or play an empty slot, mount an audio disc, or play a data disc. - * Generally, changing an application program to support O_NONBLOCK - * is as easy as the following: - * - drive = open("/dev/cdrom", O_RDONLY); - * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK); - * It is worth the small change. - * - * Patches for many common CD programs (provided by David A. van Leeuwen) - * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/ - * - *******************************************************/ - -/* When a driver supports a certain function, but the cdrom drive we are - * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will - * borrow the "Operation not supported" error from the network folks to - * accomplish this. Maybe someday we will get a more targeted error code, - * but this will do for now... */ -#define EDRIVE_CANT_DO_THIS EOPNOTSUPP - -/******************************************************* - * The CD-ROM IOCTL commands -- these should be supported by - * all the various cdrom drivers. For the CD-ROM ioctls, we - * will commandeer byte 0x53, or 'S'. - *******************************************************/ -#define CDROMPAUSE 0x5301 /* Pause Audio Operation */ -#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */ -#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ -#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index - (struct cdrom_ti) */ -#define CDROMREADTOCHDR 0x5305 /* Read TOC header - (struct cdrom_tochdr) */ -#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry - (struct cdrom_tocentry) */ -#define CDROMSTOP 0x5307 /* Stop the cdrom drive */ -#define CDROMSTART 0x5308 /* Start the cdrom drive */ -#define CDROMEJECT 0x5309 /* Ejects the cdrom media */ -#define CDROMVOLCTRL 0x530a /* Control output volume - (struct cdrom_volctrl) */ -#define CDROMSUBCHNL 0x530b /* Read subchannel data - (struct cdrom_subchnl) */ -#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes) - (struct cdrom_read) */ -#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes) - (struct cdrom_read) */ -#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ -#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ -#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session - address of multi session disks - (struct cdrom_multisession) */ -#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" - if available (struct cdrom_mcn) */ -#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated, - but here anyway for compatibility */ -#define CDROMRESET 0x5312 /* hard-reset the drive */ -#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting - (struct cdrom_volctrl) */ -#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) - (struct cdrom_read) */ -/* - * These ioctls are used only used in aztcd.c and optcd.c - */ -#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */ -#define CDROMSEEK 0x5316 /* seek msf address */ - -/* - * This ioctl is only used by the scsi-cd driver. - It is for playing audio in logical block addressing mode. - */ -#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ - -/* - * These ioctls are only used in optcd.c - */ -#define CDROMREADALL 0x5318 /* read all 2646 bytes */ - -/* - * These ioctls are (now) only in ide-cd.c for controlling - * drive spindown time. They should be implemented in the - * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, - * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... - * -Erik - */ -#define CDROMGETSPINDOWN 0x531d -#define CDROMSETSPINDOWN 0x531e - -/* - * These ioctls are implemented through the uniform CD-ROM driver - * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM - * drivers are eventually ported to the uniform CD-ROM driver interface. - */ -#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ -#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ -#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ -#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ -#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ -#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ -#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ -#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ -#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ -#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ -#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ -#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ - -/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. - * Future CDROM ioctls should be kept below 0x537F - */ - -/* This ioctl is only used by sbpcd at the moment */ -#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ - /* conflict with SCSI_IOCTL_GET_IDLUN */ - -/* DVD-ROM Specific ioctls */ -#define DVD_READ_STRUCT 0x5390 /* Read structure */ -#define DVD_WRITE_STRUCT 0x5391 /* Write structure */ -#define DVD_AUTH 0x5392 /* Authentication */ - -#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ -#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ -#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ - -/******************************************************* - * CDROM IOCTL structures - *******************************************************/ - -/* Address in MSF format */ -struct cdrom_msf0 -{ - __u8 minute; - __u8 second; - __u8 frame; -}; - -/* Address in either MSF or logical format */ -union cdrom_addr -{ - struct cdrom_msf0 msf; - int lba; -}; - -/* This struct is used by the CDROMPLAYMSF ioctl */ -struct cdrom_msf -{ - __u8 cdmsf_min0; /* start minute */ - __u8 cdmsf_sec0; /* start second */ - __u8 cdmsf_frame0; /* start frame */ - __u8 cdmsf_min1; /* end minute */ - __u8 cdmsf_sec1; /* end second */ - __u8 cdmsf_frame1; /* end frame */ -}; - -/* This struct is used by the CDROMPLAYTRKIND ioctl */ -struct cdrom_ti -{ - __u8 cdti_trk0; /* start track */ - __u8 cdti_ind0; /* start index */ - __u8 cdti_trk1; /* end track */ - __u8 cdti_ind1; /* end index */ -}; - -/* This struct is used by the CDROMREADTOCHDR ioctl */ -struct cdrom_tochdr -{ - __u8 cdth_trk0; /* start track */ - __u8 cdth_trk1; /* end track */ -}; - -/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */ -struct cdrom_volctrl -{ - __u8 channel0; - __u8 channel1; - __u8 channel2; - __u8 channel3; -}; - -/* This struct is used by the CDROMSUBCHNL ioctl */ -struct cdrom_subchnl -{ - __u8 cdsc_format; - __u8 cdsc_audiostatus; - __u8 cdsc_adr: 4; - __u8 cdsc_ctrl: 4; - __u8 cdsc_trk; - __u8 cdsc_ind; - union cdrom_addr cdsc_absaddr; - union cdrom_addr cdsc_reladdr; -}; - - -/* This struct is used by the CDROMREADTOCENTRY ioctl */ -struct cdrom_tocentry -{ - __u8 cdte_track; - __u8 cdte_adr :4; - __u8 cdte_ctrl :4; - __u8 cdte_format; - union cdrom_addr cdte_addr; - __u8 cdte_datamode; -}; - -/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */ -struct cdrom_read -{ - int cdread_lba; - char *cdread_bufaddr; - int cdread_buflen; -}; - -/* This struct is used by the CDROMREADAUDIO ioctl */ -struct cdrom_read_audio -{ - union cdrom_addr addr; /* frame address */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ - int nframes; /* number of 2352-byte-frames to read at once */ - __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */ -}; - -/* This struct is used with the CDROMMULTISESSION ioctl */ -struct cdrom_multisession -{ - union cdrom_addr addr; /* frame address: start-of-last-session - (not the new "frame 16"!). Only valid - if the "xa_flag" is true. */ - __u8 xa_flag; /* 1: "is XA disk" */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ -}; - -/* This struct is used with the CDROM_GET_MCN ioctl. - * Very few audio discs actually have Universal Product Code information, - * which should just be the Medium Catalog Number on the box. Also note - * that the way the codeis written on CD is _not_ uniform across all discs! - */ -struct cdrom_mcn -{ - __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */ -}; - -/* This is used by the CDROMPLAYBLK ioctl */ -struct cdrom_blk -{ - unsigned from; - unsigned short len; -}; - -#define CDROM_PACKET_SIZE 12 - -#define CGC_DATA_UNKNOWN 0 -#define CGC_DATA_WRITE 1 -#define CGC_DATA_READ 2 -#define CGC_DATA_NONE 3 - -/* for CDROM_PACKET_COMMAND ioctl */ -struct cdrom_generic_command -{ - unsigned char cmd[CDROM_PACKET_SIZE]; - unsigned char __user *buffer; - unsigned int buflen; - int stat; - struct request_sense __user *sense; - unsigned char data_direction; - int quiet; - int timeout; - void __user *reserved[1]; /* unused, actually */ -}; - -/* - * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, - * 2340, or 2352 bytes long. - -* Sector types of the standard CD-ROM data formats: - * - * format sector type user data size (bytes) - * ----------------------------------------------------------------------------- - * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW) - * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE) - * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0) - * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE) - * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes) - * - * - * The layout of the standard CD-ROM data formats: - * ----------------------------------------------------------------------------- - * - audio (red): | audio_sample_bytes | - * | 2352 | - * - * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC | - * | 12 - 4 - 2048 - 4 - 8 - 276 | - * - * - data (yellow, mode2): | sync - head - data | - * | 12 - 4 - 2336 | - * - * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC | - * | 12 - 4 - 8 - 2048 - 4 - 276 | - * - * - XA data (green, mode2 form2): | sync - head - sub - data - Spare | - * | 12 - 4 - 8 - 2324 - 4 | - * - */ - -/* Some generally useful CD-ROM information -- mostly based on the above */ -#define CD_MINS 74 /* max. minutes per CD, not really a limit */ -#define CD_SECS 60 /* seconds per minute */ -#define CD_FRAMES 75 /* frames per second */ -#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */ -#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */ -#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */ -#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */ -#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */ -#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */ -#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */ -#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */ -#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */ -#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */ -#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */ -#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */ -#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ -/* most drives don't deliver everything: */ -#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/ -#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/ - -#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */ -#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */ -#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */ - -/* CD-ROM address types (cdrom_tocentry.cdte_format) */ -#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */ -#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */ - -/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */ -#define CDROM_DATA_TRACK 0x04 - -/* The leadout track is always 0xAA, regardless of # of tracks on disc */ -#define CDROM_LEADOUT 0xAA - -/* audio states (from SCSI-2, but seen with other drives, too) */ -#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */ -#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */ -#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */ -#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */ -#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */ -#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */ - -/* capability flags used with the uniform CD-ROM driver */ -#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */ -#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */ -#define CDC_LOCK 0x4 /* disable manual eject */ -#define CDC_SELECT_SPEED 0x8 /* programmable speed */ -#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */ -#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */ -#define CDC_MCN 0x40 /* Medium Catalog Number */ -#define CDC_MEDIA_CHANGED 0x80 /* media changed */ -#define CDC_PLAY_AUDIO 0x100 /* audio functions */ -#define CDC_RESET 0x200 /* hard reset device */ -#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */ -#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */ -#define CDC_CD_R 0x2000 /* drive is a CD-R */ -#define CDC_CD_RW 0x4000 /* drive is a CD-RW */ -#define CDC_DVD 0x8000 /* drive is a DVD */ -#define CDC_DVD_R 0x10000 /* drive can write DVD-R */ -#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */ -#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */ -#define CDC_MRW 0x80000 /* drive can read MRW */ -#define CDC_MRW_W 0x100000 /* drive can write MRW */ -#define CDC_RAM 0x200000 /* ok to open for WRITE */ - -/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */ -#define CDS_NO_INFO 0 /* if not implemented */ -#define CDS_NO_DISC 1 -#define CDS_TRAY_OPEN 2 -#define CDS_DRIVE_NOT_READY 3 -#define CDS_DISC_OK 4 - -/* return values for the CDROM_DISC_STATUS ioctl */ -/* can also return CDS_NO_[INFO|DISC], from above */ -#define CDS_AUDIO 100 -#define CDS_DATA_1 101 -#define CDS_DATA_2 102 -#define CDS_XA_2_1 103 -#define CDS_XA_2_2 104 -#define CDS_MIXED 105 - -/* User-configurable behavior options for the uniform CD-ROM driver */ -#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */ -#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */ -#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */ -#define CDO_LOCK 0x8 /* lock tray on open files */ -#define CDO_CHECK_TYPE 0x10 /* check type on open for data */ - -/* Special codes used when specifying changer slots. */ -#define CDSL_NONE (INT_MAX-1) -#define CDSL_CURRENT INT_MAX - -/* For partition based multisession access. IDE can handle 64 partitions - * per drive - SCSI CD-ROM's use minors to differentiate between the - * various drives, so we can't do multisessions the same way there. - * Use the -o session=x option to mount on them. - */ -#define CD_PART_MAX 64 -#define CD_PART_MASK (CD_PART_MAX - 1) - -/********************************************************************* - * Generic Packet commands, MMC commands, and such - *********************************************************************/ - - /* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -#define GPCMD_BLANK 0xa1 -#define GPCMD_CLOSE_TRACK 0x5b -#define GPCMD_FLUSH_CACHE 0x35 -#define GPCMD_FORMAT_UNIT 0x04 -#define GPCMD_GET_CONFIGURATION 0x46 -#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a -#define GPCMD_GET_PERFORMANCE 0xac -#define GPCMD_INQUIRY 0x12 -#define GPCMD_LOAD_UNLOAD 0xa6 -#define GPCMD_MECHANISM_STATUS 0xbd -#define GPCMD_MODE_SELECT_10 0x55 -#define GPCMD_MODE_SENSE_10 0x5a -#define GPCMD_PAUSE_RESUME 0x4b -#define GPCMD_PLAY_AUDIO_10 0x45 -#define GPCMD_PLAY_AUDIO_MSF 0x47 -#define GPCMD_PLAY_AUDIO_TI 0x48 -#define GPCMD_PLAY_CD 0xbc -#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e -#define GPCMD_READ_10 0x28 -#define GPCMD_READ_12 0xa8 -#define GPCMD_READ_BUFFER 0x3c -#define GPCMD_READ_BUFFER_CAPACITY 0x5c -#define GPCMD_READ_CDVD_CAPACITY 0x25 -#define GPCMD_READ_CD 0xbe -#define GPCMD_READ_CD_MSF 0xb9 -#define GPCMD_READ_DISC_INFO 0x51 -#define GPCMD_READ_DVD_STRUCTURE 0xad -#define GPCMD_READ_FORMAT_CAPACITIES 0x23 -#define GPCMD_READ_HEADER 0x44 -#define GPCMD_READ_TRACK_RZONE_INFO 0x52 -#define GPCMD_READ_SUBCHANNEL 0x42 -#define GPCMD_READ_TOC_PMA_ATIP 0x43 -#define GPCMD_REPAIR_RZONE_TRACK 0x58 -#define GPCMD_REPORT_KEY 0xa4 -#define GPCMD_REQUEST_SENSE 0x03 -#define GPCMD_RESERVE_RZONE_TRACK 0x53 -#define GPCMD_SEND_CUE_SHEET 0x5d -#define GPCMD_SCAN 0xba -#define GPCMD_SEEK 0x2b -#define GPCMD_SEND_DVD_STRUCTURE 0xbf -#define GPCMD_SEND_EVENT 0xa2 -#define GPCMD_SEND_KEY 0xa3 -#define GPCMD_SEND_OPC 0x54 -#define GPCMD_SET_READ_AHEAD 0xa7 -#define GPCMD_SET_STREAMING 0xb6 -#define GPCMD_START_STOP_UNIT 0x1b -#define GPCMD_STOP_PLAY_SCAN 0x4e -#define GPCMD_TEST_UNIT_READY 0x00 -#define GPCMD_VERIFY_10 0x2f -#define GPCMD_WRITE_10 0x2a -#define GPCMD_WRITE_12 0xaa -#define GPCMD_WRITE_AND_VERIFY_10 0x2e -#define GPCMD_WRITE_BUFFER 0x3b -/* This is listed as optional in ATAPI 2.6, but is (curiously) - * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji - * Table 377 as an MMC command for SCSi devices though... Most ATAPI - * drives support it. */ -#define GPCMD_SET_SPEED 0xbb -/* This seems to be a SCSI specific CD-ROM opcode - * to play data at track/index */ -#define GPCMD_PLAYAUDIO_TI 0x48 -/* - * From MS Media Status Notification Support Specification. For - * older drives only. - */ -#define GPCMD_GET_MEDIA_STATUS 0xda - -/* Mode page codes for mode sense/set */ -#define GPMODE_VENDOR_PAGE 0x00 -#define GPMODE_R_W_ERROR_PAGE 0x01 -#define GPMODE_WRITE_PARMS_PAGE 0x05 -#define GPMODE_WCACHING_PAGE 0x08 -#define GPMODE_AUDIO_CTL_PAGE 0x0e -#define GPMODE_POWER_PAGE 0x1a -#define GPMODE_FAULT_FAIL_PAGE 0x1c -#define GPMODE_TO_PROTECT_PAGE 0x1d -#define GPMODE_CAPABILITIES_PAGE 0x2a -#define GPMODE_ALL_PAGES 0x3f -/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor - * of MODE_SENSE_POWER_PAGE */ -#define GPMODE_CDROM_PAGE 0x0d - - - -/* DVD struct types */ -#define DVD_STRUCT_PHYSICAL 0x00 -#define DVD_STRUCT_COPYRIGHT 0x01 -#define DVD_STRUCT_DISCKEY 0x02 -#define DVD_STRUCT_BCA 0x03 -#define DVD_STRUCT_MANUFACT 0x04 - -struct dvd_layer { - __u8 book_version : 4; - __u8 book_type : 4; - __u8 min_rate : 4; - __u8 disc_size : 4; - __u8 layer_type : 4; - __u8 track_path : 1; - __u8 nlayers : 2; - __u8 track_density : 4; - __u8 linear_density : 4; - __u8 bca : 1; - __u32 start_sector; - __u32 end_sector; - __u32 end_sector_l0; -}; - -#define DVD_LAYERS 4 - -struct dvd_physical { - __u8 type; - __u8 layer_num; - struct dvd_layer layer[DVD_LAYERS]; -}; - -struct dvd_copyright { - __u8 type; - - __u8 layer_num; - __u8 cpst; - __u8 rmi; -}; - -struct dvd_disckey { - __u8 type; - - unsigned agid : 2; - __u8 value[2048]; -}; - -struct dvd_bca { - __u8 type; - - int len; - __u8 value[188]; -}; - -struct dvd_manufact { - __u8 type; - - __u8 layer_num; - int len; - __u8 value[2048]; -}; - -typedef union { - __u8 type; - - struct dvd_physical physical; - struct dvd_copyright copyright; - struct dvd_disckey disckey; - struct dvd_bca bca; - struct dvd_manufact manufact; -} dvd_struct; - -/* - * DVD authentication ioctl - */ - -/* Authentication states */ -#define DVD_LU_SEND_AGID 0 -#define DVD_HOST_SEND_CHALLENGE 1 -#define DVD_LU_SEND_KEY1 2 -#define DVD_LU_SEND_CHALLENGE 3 -#define DVD_HOST_SEND_KEY2 4 - -/* Termination states */ -#define DVD_AUTH_ESTABLISHED 5 -#define DVD_AUTH_FAILURE 6 - -/* Other functions */ -#define DVD_LU_SEND_TITLE_KEY 7 -#define DVD_LU_SEND_ASF 8 -#define DVD_INVALIDATE_AGID 9 -#define DVD_LU_SEND_RPC_STATE 10 -#define DVD_HOST_SEND_RPC_STATE 11 - -/* State data */ -typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */ -typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */ - -struct dvd_lu_send_agid { - __u8 type; - unsigned agid : 2; -}; - -struct dvd_host_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -struct dvd_send_key { - __u8 type; - unsigned agid : 2; - - dvd_key key; -}; - -struct dvd_lu_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -#define DVD_CPM_NO_COPYRIGHT 0 -#define DVD_CPM_COPYRIGHTED 1 - -#define DVD_CP_SEC_NONE 0 -#define DVD_CP_SEC_EXIST 1 - -#define DVD_CGMS_UNRESTRICTED 0 -#define DVD_CGMS_SINGLE 2 -#define DVD_CGMS_RESTRICTED 3 - -struct dvd_lu_send_title_key { - __u8 type; - unsigned agid : 2; - - dvd_key title_key; - int lba; - unsigned cpm : 1; - unsigned cp_sec : 1; - unsigned cgms : 2; -}; - -struct dvd_lu_send_asf { - __u8 type; - unsigned agid : 2; - - unsigned asf : 1; -}; - -struct dvd_host_send_rpcstate { - __u8 type; - __u8 pdrc; -}; - -struct dvd_lu_send_rpcstate { - __u8 type : 2; - __u8 vra : 3; - __u8 ucca : 3; - __u8 region_mask; - __u8 rpc_scheme; -}; - -typedef union { - __u8 type; - - struct dvd_lu_send_agid lsa; - struct dvd_host_send_challenge hsc; - struct dvd_send_key lsk; - struct dvd_lu_send_challenge lsc; - struct dvd_send_key hsk; - struct dvd_lu_send_title_key lstk; - struct dvd_lu_send_asf lsasf; - struct dvd_host_send_rpcstate hrpcs; - struct dvd_lu_send_rpcstate lrpcs; -} dvd_authinfo; - -struct request_sense { -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 valid : 1; - __u8 error_code : 7; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 error_code : 7; - __u8 valid : 1; -#endif - __u8 segment_number; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 ili : 1; - __u8 reserved2 : 1; - __u8 sense_key : 4; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 sense_key : 4; - __u8 reserved2 : 1; - __u8 ili : 1; - __u8 reserved1 : 2; -#endif - __u8 information[4]; - __u8 add_sense_len; - __u8 command_info[4]; - __u8 asc; - __u8 ascq; - __u8 fruc; - __u8 sks[3]; - __u8 asb[46]; -}; - -/* - * feature profile - */ -#define CDF_RWRT 0x0020 /* "Random Writable" */ -#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */ -#define CDF_MRW 0x0028 - -/* - * media status bits - */ -#define CDM_MRW_NOTMRW 0 -#define CDM_MRW_BGFORMAT_INACTIVE 1 -#define CDM_MRW_BGFORMAT_ACTIVE 2 -#define CDM_MRW_BGFORMAT_COMPLETE 3 - -/* - * mrw address spaces - */ -#define MRW_LBA_DMA 0 -#define MRW_LBA_GAA 1 - -/* - * mrw mode pages (first is deprecated) -- probed at init time and - * cdi->mrw_mode_page is set - */ -#define MRW_MODE_PC_PRE1 0x2c -#define MRW_MODE_PC 0x03 - -struct mrw_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 write : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 write : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; - __u8 reserved4; - __u8 reserved5; -}; - -/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */ -struct rwrt_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; - __u32 last_lba; - __u32 block_size; - __u16 blocking; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 page_present : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 page_present : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; -}; - -typedef struct { - __be16 disc_information_length; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 3; - __u8 erasable : 1; - __u8 border_status : 2; - __u8 disc_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 disc_status : 2; - __u8 border_status : 2; - __u8 erasable : 1; - __u8 reserved1 : 3; -#else -#error "Please fix " -#endif - __u8 n_first_track; - __u8 n_sessions_lsb; - __u8 first_track_lsb; - __u8 last_track_lsb; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 did_v : 1; - __u8 dbc_v : 1; - __u8 uru : 1; - __u8 reserved2 : 2; - __u8 dbit : 1; - __u8 mrw_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 mrw_status : 2; - __u8 dbit : 1; - __u8 reserved2 : 2; - __u8 uru : 1; - __u8 dbc_v : 1; - __u8 did_v : 1; -#endif - __u8 disc_type; - __u8 n_sessions_msb; - __u8 first_track_msb; - __u8 last_track_msb; - __u32 disc_id; - __u32 lead_in; - __u32 lead_out; - __u8 disc_bar_code[8]; - __u8 reserved3; - __u8 n_opc; -} disc_information; - -typedef struct { - __be16 track_information_length; - __u8 track_lsb; - __u8 session_lsb; - __u8 reserved1; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 2; - __u8 damage : 1; - __u8 copy : 1; - __u8 track_mode : 4; - __u8 rt : 1; - __u8 blank : 1; - __u8 packet : 1; - __u8 fp : 1; - __u8 data_mode : 4; - __u8 reserved3 : 6; - __u8 lra_v : 1; - __u8 nwa_v : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 track_mode : 4; - __u8 copy : 1; - __u8 damage : 1; - __u8 reserved2 : 2; - __u8 data_mode : 4; - __u8 fp : 1; - __u8 packet : 1; - __u8 blank : 1; - __u8 rt : 1; - __u8 nwa_v : 1; - __u8 lra_v : 1; - __u8 reserved3 : 6; -#endif - __be32 track_start; - __be32 next_writable; - __be32 free_blocks; - __be32 fixed_packet_size; - __be32 track_size; - __be32 last_rec_address; -} track_information; - -struct feature_header { - __u32 data_len; - __u8 reserved1; - __u8 reserved2; - __u16 curr_profile; -}; - -struct mode_page_header { - __be16 mode_data_length; - __u8 medium_type; - __u8 reserved1; - __u8 reserved2; - __u8 reserved3; - __be16 desc_length; -}; - -#ifdef __KERNEL__ #include /* not really needed, later.. */ #include +#include struct packet_command { @@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f) { return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET; } -#endif /* End of kernel only stuff */ - #endif /* _LINUX_CDROM_H */ diff --git a/include/linux/cgroupstats.h b/include/linux/cgroupstats.h deleted file mode 100644 index 3753c33160d1..000000000000 --- a/include/linux/cgroupstats.h +++ /dev/null @@ -1,71 +0,0 @@ -/* cgroupstats.h - exporting per-cgroup statistics - * - * Copyright IBM Corporation, 2007 - * Author Balbir Singh - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2.1 of the GNU Lesser General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef _LINUX_CGROUPSTATS_H -#define _LINUX_CGROUPSTATS_H - -#include -#include - -/* - * Data shared between user space and kernel space on a per cgroup - * basis. This data is shared using taskstats. - * - * Most of these states are derived by looking at the task->state value - * For the nr_io_wait state, a flag in the delay accounting structure - * indicates that the task is waiting on IO - * - * Each member is aligned to a 8 byte boundary. - */ -struct cgroupstats { - __u64 nr_sleeping; /* Number of tasks sleeping */ - __u64 nr_running; /* Number of tasks running */ - __u64 nr_stopped; /* Number of tasks in stopped state */ - __u64 nr_uninterruptible; /* Number of tasks in uninterruptible */ - /* state */ - __u64 nr_io_wait; /* Number of tasks waiting on IO */ -}; - -/* - * Commands sent from userspace - * Not versioned. New commands should only be inserted at the enum's end - * prior to __CGROUPSTATS_CMD_MAX - */ - -enum { - CGROUPSTATS_CMD_UNSPEC = __TASKSTATS_CMD_MAX, /* Reserved */ - CGROUPSTATS_CMD_GET, /* user->kernel request/get-response */ - CGROUPSTATS_CMD_NEW, /* kernel->user event */ - __CGROUPSTATS_CMD_MAX, -}; - -#define CGROUPSTATS_CMD_MAX (__CGROUPSTATS_CMD_MAX - 1) - -enum { - CGROUPSTATS_TYPE_UNSPEC = 0, /* Reserved */ - CGROUPSTATS_TYPE_CGROUP_STATS, /* contains name + stats */ - __CGROUPSTATS_TYPE_MAX, -}; - -#define CGROUPSTATS_TYPE_MAX (__CGROUPSTATS_TYPE_MAX - 1) - -enum { - CGROUPSTATS_CMD_ATTR_UNSPEC = 0, - CGROUPSTATS_CMD_ATTR_FD, - __CGROUPSTATS_CMD_ATTR_MAX, -}; - -#define CGROUPSTATS_CMD_ATTR_MAX (__CGROUPSTATS_CMD_ATTR_MAX - 1) - -#endif /* _LINUX_CGROUPSTATS_H */ diff --git a/include/linux/chio.h b/include/linux/chio.h deleted file mode 100644 index d9bac7f97282..000000000000 --- a/include/linux/chio.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * ioctl interface for the scsi media changer driver - */ - -/* changer element types */ -#define CHET_MT 0 /* media transport element (robot) */ -#define CHET_ST 1 /* storage element (media slots) */ -#define CHET_IE 2 /* import/export element */ -#define CHET_DT 3 /* data transfer element (tape/cdrom/whatever) */ -#define CHET_V1 4 /* vendor specific #1 */ -#define CHET_V2 5 /* vendor specific #2 */ -#define CHET_V3 6 /* vendor specific #3 */ -#define CHET_V4 7 /* vendor specific #4 */ - - -/* - * CHIOGPARAMS - * query changer properties - * - * CHIOVGPARAMS - * query vendor-specific element types - * - * accessing elements works by specifing type and unit of the element. - * for example, storage elements are addressed with type = CHET_ST and - * unit = 0 .. cp_nslots-1 - * - */ -struct changer_params { - int cp_curpicker; /* current transport element */ - int cp_npickers; /* number of transport elements (CHET_MT) */ - int cp_nslots; /* number of storage elements (CHET_ST) */ - int cp_nportals; /* number of import/export elements (CHET_IE) */ - int cp_ndrives; /* number of data transfer elements (CHET_DT) */ -}; -struct changer_vendor_params { - int cvp_n1; /* number of vendor specific elems (CHET_V1) */ - char cvp_label1[16]; - int cvp_n2; /* number of vendor specific elems (CHET_V2) */ - char cvp_label2[16]; - int cvp_n3; /* number of vendor specific elems (CHET_V3) */ - char cvp_label3[16]; - int cvp_n4; /* number of vendor specific elems (CHET_V4) */ - char cvp_label4[16]; - int reserved[8]; -}; - - -/* - * CHIOMOVE - * move a medium from one element to another - */ -struct changer_move { - int cm_fromtype; /* type/unit of source element */ - int cm_fromunit; - int cm_totype; /* type/unit of destination element */ - int cm_tounit; - int cm_flags; -}; -#define CM_INVERT 1 /* flag: rotate media (for double-sided like MOD) */ - - -/* - * CHIOEXCHANGE - * move one medium from element #1 to element #2, - * and another one from element #2 to element #3. - * element #1 and #3 are allowed to be identical. - */ -struct changer_exchange { - int ce_srctype; /* type/unit of element #1 */ - int ce_srcunit; - int ce_fdsttype; /* type/unit of element #2 */ - int ce_fdstunit; - int ce_sdsttype; /* type/unit of element #3 */ - int ce_sdstunit; - int ce_flags; -}; -#define CE_INVERT1 1 -#define CE_INVERT2 2 - - -/* - * CHIOPOSITION - * move the transport element (robot arm) to a specific element. - */ -struct changer_position { - int cp_type; - int cp_unit; - int cp_flags; -}; -#define CP_INVERT 1 - - -/* - * CHIOGSTATUS - * get element status for all elements of a specific type - */ -struct changer_element_status { - int ces_type; - unsigned char __user *ces_data; -}; -#define CESTATUS_FULL 0x01 /* full */ -#define CESTATUS_IMPEXP 0x02 /* media was imported (inserted by sysop) */ -#define CESTATUS_EXCEPT 0x04 /* error condition */ -#define CESTATUS_ACCESS 0x08 /* access allowed */ -#define CESTATUS_EXENAB 0x10 /* element can export media */ -#define CESTATUS_INENAB 0x20 /* element can import media */ - - -/* - * CHIOGELEM - * get more detailed status information for a single element - */ -struct changer_get_element { - int cge_type; /* type/unit */ - int cge_unit; - int cge_status; /* status */ - int cge_errno; /* errno */ - int cge_srctype; /* source element of the last move/exchange */ - int cge_srcunit; - int cge_id; /* scsi id (for data transfer elements) */ - int cge_lun; /* scsi lun (for data transfer elements) */ - char cge_pvoltag[36]; /* primary volume tag */ - char cge_avoltag[36]; /* alternate volume tag */ - int cge_flags; -}; -/* flags */ -#define CGE_ERRNO 0x01 /* errno available */ -#define CGE_INVERT 0x02 /* media inverted */ -#define CGE_SRC 0x04 /* media src available */ -#define CGE_IDLUN 0x08 /* ID+LUN available */ -#define CGE_PVOLTAG 0x10 /* primary volume tag available */ -#define CGE_AVOLTAG 0x20 /* alternate volume tag available */ - - -/* - * CHIOSVOLTAG - * set volume tag - */ -struct changer_set_voltag { - int csv_type; /* type/unit */ - int csv_unit; - char csv_voltag[36]; /* volume tag */ - int csv_flags; -}; -#define CSV_PVOLTAG 0x01 /* primary volume tag */ -#define CSV_AVOLTAG 0x02 /* alternate volume tag */ -#define CSV_CLEARTAG 0x04 /* clear volume tag */ - -/* ioctls */ -#define CHIOMOVE _IOW('c', 1,struct changer_move) -#define CHIOEXCHANGE _IOW('c', 2,struct changer_exchange) -#define CHIOPOSITION _IOW('c', 3,struct changer_position) -#define CHIOGPICKER _IOR('c', 4,int) /* not impl. */ -#define CHIOSPICKER _IOW('c', 5,int) /* not impl. */ -#define CHIOGPARAMS _IOR('c', 6,struct changer_params) -#define CHIOGSTATUS _IOW('c', 8,struct changer_element_status) -#define CHIOGELEM _IOW('c',16,struct changer_get_element) -#define CHIOINITELEM _IO('c',17) -#define CHIOSVOLTAG _IOW('c',18,struct changer_set_voltag) -#define CHIOGVPARAMS _IOR('c',19,struct changer_vendor_params) - -/* ---------------------------------------------------------------------- */ - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h index 3c4aac406175..88bee3a33090 100644 --- a/include/linux/cm4000_cs.h +++ b/include/linux/cm4000_cs.h @@ -1,68 +1,10 @@ #ifndef _CM4000_H_ #define _CM4000_H_ -#include +#include -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#ifdef __KERNEL__ #define DEVICE_NAME "cmm" #define MODULE_NAME "cm4000_cs" -#endif /* __KERNEL__ */ #endif /* _CM4000_H_ */ diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index d03612b196e1..2c1bc1ea04ee 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -14,111 +14,11 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */ - #ifndef CN_PROC_H #define CN_PROC_H -#include - -/* - * Userspace sends this enum to register with the kernel that it is listening - * for events on the connector. - */ -enum proc_cn_mcast_op { - PROC_CN_MCAST_LISTEN = 1, - PROC_CN_MCAST_IGNORE = 2 -}; - -/* - * From the user's point of view, the process - * ID is the thread group ID and thread ID is the internal - * kernel "pid". So, fields are assigned as follow: - * - * In user space - In kernel space - * - * parent process ID = parent->tgid - * parent thread ID = parent->pid - * child process ID = child->tgid - * child thread ID = child->pid - */ - -struct proc_event { - enum what { - /* Use successive bits so the enums can be used to record - * sets of events as well - */ - PROC_EVENT_NONE = 0x00000000, - PROC_EVENT_FORK = 0x00000001, - PROC_EVENT_EXEC = 0x00000002, - PROC_EVENT_UID = 0x00000004, - PROC_EVENT_GID = 0x00000040, - PROC_EVENT_SID = 0x00000080, - PROC_EVENT_PTRACE = 0x00000100, - PROC_EVENT_COMM = 0x00000200, - /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit */ - PROC_EVENT_EXIT = 0x80000000 - } what; - __u32 cpu; - __u64 __attribute__((aligned(8))) timestamp_ns; - /* Number of nano seconds since system boot */ - union { /* must be last field of proc_event struct */ - struct { - __u32 err; - } ack; - - struct fork_proc_event { - __kernel_pid_t parent_pid; - __kernel_pid_t parent_tgid; - __kernel_pid_t child_pid; - __kernel_pid_t child_tgid; - } fork; - - struct exec_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } exec; - - struct id_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - union { - __u32 ruid; /* task uid */ - __u32 rgid; /* task gid */ - } r; - union { - __u32 euid; - __u32 egid; - } e; - } id; - - struct sid_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } sid; - - struct ptrace_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __kernel_pid_t tracer_pid; - __kernel_pid_t tracer_tgid; - } ptrace; - - struct comm_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - char comm[16]; - } comm; - - struct exit_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __u32 exit_code, exit_signal; - } exit; - } event_data; -}; +#include -#ifdef __KERNEL__ #ifdef CONFIG_PROC_EVENTS void proc_fork_connector(struct task_struct *task); void proc_exec_connector(struct task_struct *task); @@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task, static inline void proc_exit_connector(struct task_struct *task) {} #endif /* CONFIG_PROC_EVENTS */ -#endif /* __KERNEL__ */ #endif /* CN_PROC_H */ diff --git a/include/linux/coda.h b/include/linux/coda.h index 96c87693800b..cff544f81105 100644 --- a/include/linux/coda.h +++ b/include/linux/coda.h @@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance. * Linux modifications by * Peter Braam, Aug 1996 */ - #ifndef _CODA_HEADER_ #define _CODA_HEADER_ - -/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */ -#if defined(__NetBSD__) || \ - ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL)) -#include -#endif - -#ifndef CODA_MAXSYMLINKS -#define CODA_MAXSYMLINKS 10 -#endif - -#if defined(DJGPP) || defined(__CYGWIN32__) -#ifdef KERNEL -typedef unsigned long u_long; -typedef unsigned int u_int; -typedef unsigned short u_short; -typedef u_long ino_t; -typedef u_long dev_t; -typedef void * caddr_t; -#ifdef DOS -typedef unsigned __int64 u_quad_t; -#else -typedef unsigned long long u_quad_t; -#endif - -#define inline - -struct timespec { - long ts_sec; - long ts_nsec; -}; -#else /* DJGPP but not KERNEL */ -#include -typedef unsigned long long u_quad_t; -#endif /* !KERNEL */ -#endif /* !DJGPP */ - - #if defined(__linux__) -#include -#define cdev_t u_quad_t -#ifndef __KERNEL__ -#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2) -#define _UQUAD_T_ 1 typedef unsigned long long u_quad_t; -#endif -#else /*__KERNEL__ */ -typedef unsigned long long u_quad_t; -#endif /* __KERNEL__ */ #else -#define cdev_t dev_t -#endif - -#ifdef __CYGWIN32__ -struct timespec { - time_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ -}; -#endif - -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ -typedef signed char int8_t; -typedef unsigned char u_int8_t; -typedef short int16_t; -typedef unsigned short u_int16_t; -typedef int int32_t; -typedef unsigned int u_int32_t; -#endif - - -/* - * Cfs constants - */ -#define CODA_MAXNAMLEN 255 -#define CODA_MAXPATHLEN 1024 -#define CODA_MAXSYMLINK 10 - -/* these are Coda's version of O_RDONLY etc combinations - * to deal with VFS open modes - */ -#define C_O_READ 0x001 -#define C_O_WRITE 0x002 -#define C_O_TRUNC 0x010 -#define C_O_EXCL 0x100 -#define C_O_CREAT 0x200 - -/* these are to find mode bits in Venus */ -#define C_M_READ 00400 -#define C_M_WRITE 00200 - -/* for access Venus will use */ -#define C_A_C_OK 8 /* Test for writing upon create. */ -#define C_A_R_OK 4 /* Test for read permission. */ -#define C_A_W_OK 2 /* Test for write permission. */ -#define C_A_X_OK 1 /* Test for execute permission. */ -#define C_A_F_OK 0 /* Test for existence. */ - - - -#ifndef _VENUS_DIRENT_T_ -#define _VENUS_DIRENT_T_ 1 -struct venus_dirent { - u_int32_t d_fileno; /* file number of entry */ - u_int16_t d_reclen; /* length of this record */ - u_int8_t d_type; /* file type, see below */ - u_int8_t d_namlen; /* length of string in d_name */ - char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */ -}; -#undef DIRSIZ -#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \ - (((dp)->d_namlen+1 + 3) &~ 3)) - -/* - * File types - */ -#define CDT_UNKNOWN 0 -#define CDT_FIFO 1 -#define CDT_CHR 2 -#define CDT_DIR 4 -#define CDT_BLK 6 -#define CDT_REG 8 -#define CDT_LNK 10 -#define CDT_SOCK 12 -#define CDT_WHT 14 - -/* - * Convert between stat structure types and directory types. - */ -#define IFTOCDT(mode) (((mode) & 0170000) >> 12) -#define CDTTOIF(dirtype) ((dirtype) << 12) - #endif - -#ifndef _VUID_T_ -#define _VUID_T_ -typedef u_int32_t vuid_t; -typedef u_int32_t vgid_t; -#endif /*_VUID_T_ */ - -struct CodaFid { - u_int32_t opaque[4]; -}; - -#define coda_f2i(fid)\ - (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0) - -#ifndef _VENUS_VATTR_T_ -#define _VENUS_VATTR_T_ -/* - * Vnode types. VNON means no type. - */ -enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD }; - -struct coda_vattr { - long va_type; /* vnode type (for create) */ - u_short va_mode; /* files access mode and type */ - short va_nlink; /* number of references to file */ - vuid_t va_uid; /* owner user id */ - vgid_t va_gid; /* owner group id */ - long va_fileid; /* file id */ - u_quad_t va_size; /* file size in bytes */ - long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_long va_gen; /* generation number of file */ - u_long va_flags; /* flags defined for file */ - cdev_t va_rdev; /* device special file represents */ - u_quad_t va_bytes; /* bytes of disk space held by file */ - u_quad_t va_filerev; /* file modification number */ -}; - +#include #endif - -/* structure used by CODA_STATFS for getting cache information from venus */ -struct coda_statfs { - int32_t f_blocks; - int32_t f_bfree; - int32_t f_bavail; - int32_t f_files; - int32_t f_ffree; -}; - -/* - * Kernel <--> Venus communications. - */ - -#define CODA_ROOT 2 -#define CODA_OPEN_BY_FD 3 -#define CODA_OPEN 4 -#define CODA_CLOSE 5 -#define CODA_IOCTL 6 -#define CODA_GETATTR 7 -#define CODA_SETATTR 8 -#define CODA_ACCESS 9 -#define CODA_LOOKUP 10 -#define CODA_CREATE 11 -#define CODA_REMOVE 12 -#define CODA_LINK 13 -#define CODA_RENAME 14 -#define CODA_MKDIR 15 -#define CODA_RMDIR 16 -#define CODA_SYMLINK 18 -#define CODA_READLINK 19 -#define CODA_FSYNC 20 -#define CODA_VGET 22 -#define CODA_SIGNAL 23 -#define CODA_REPLACE 24 /* DOWNCALL */ -#define CODA_FLUSH 25 /* DOWNCALL */ -#define CODA_PURGEUSER 26 /* DOWNCALL */ -#define CODA_ZAPFILE 27 /* DOWNCALL */ -#define CODA_ZAPDIR 28 /* DOWNCALL */ -#define CODA_PURGEFID 30 /* DOWNCALL */ -#define CODA_OPEN_BY_PATH 31 -#define CODA_RESOLVE 32 -#define CODA_REINTEGRATE 33 -#define CODA_STATFS 34 -#define CODA_STORE 35 -#define CODA_RELEASE 36 -#define CODA_NCALLS 37 - -#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID) - -#define VC_MAXDATASIZE 8192 -#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\ - VC_MAXDATASIZE - -#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t) - -#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */ - -/* - * Venus <-> Coda RPC arguments - */ -struct coda_in_hdr { - u_int32_t opcode; - u_int32_t unique; /* Keep multiple outstanding msgs distinct */ - pid_t pid; - pid_t pgid; - vuid_t uid; -}; - -/* Really important that opcode and unique are 1st two fields! */ -struct coda_out_hdr { - u_int32_t opcode; - u_int32_t unique; - u_int32_t result; -}; - -/* coda_root: NO_IN */ -struct coda_root_out { - struct coda_out_hdr oh; - struct CodaFid VFid; -}; - -struct coda_root_in { - struct coda_in_hdr in; -}; - -/* coda_open: */ -struct coda_open_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_out { - struct coda_out_hdr oh; - cdev_t dev; - ino_t inode; -}; - - -/* coda_store: */ -struct coda_store_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_store_out { - struct coda_out_hdr out; -}; - -/* coda_release: */ -struct coda_release_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_release_out { - struct coda_out_hdr out; -}; - -/* coda_close: */ -struct coda_close_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_close_out { - struct coda_out_hdr out; -}; - -/* coda_ioctl: */ -struct coda_ioctl_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int cmd; - int len; - int rwflag; - char *data; /* Place holder for data. */ -}; - -struct coda_ioctl_out { - struct coda_out_hdr oh; - int len; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_getattr: */ -struct coda_getattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_getattr_out { - struct coda_out_hdr oh; - struct coda_vattr attr; -}; - - -/* coda_setattr: NO_OUT */ -struct coda_setattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; -}; - -struct coda_setattr_out { - struct coda_out_hdr out; -}; - -/* coda_access: NO_OUT */ -struct coda_access_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_access_out { - struct coda_out_hdr out; -}; - - -/* lookup flags */ -#define CLU_CASE_SENSITIVE 0x01 -#define CLU_CASE_INSENSITIVE 0x02 - -/* coda_lookup: */ -struct coda_lookup_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ - int flags; -}; - -struct coda_lookup_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* coda_create: */ -struct coda_create_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int excl; - int mode; - int name; /* Place holder for data. */ -}; - -struct coda_create_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_remove: NO_OUT */ -struct coda_remove_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_remove_out { - struct coda_out_hdr out; -}; - -/* coda_link: NO_OUT */ -struct coda_link_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; /* cnode to link *to* */ - struct CodaFid destFid; /* Directory in which to place link */ - int tname; /* Place holder for data. */ -}; - -struct coda_link_out { - struct coda_out_hdr out; -}; - - -/* coda_rename: NO_OUT */ -struct coda_rename_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; - int srcname; - struct CodaFid destFid; - int destname; -}; - -struct coda_rename_out { - struct coda_out_hdr out; -}; - -/* coda_mkdir: */ -struct coda_mkdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int name; /* Place holder for data. */ -}; - -struct coda_mkdir_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_rmdir: NO_OUT */ -struct coda_rmdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_rmdir_out { - struct coda_out_hdr out; -}; - -/* coda_symlink: NO_OUT */ -struct coda_symlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; /* Directory to put symlink in */ - int srcname; - struct coda_vattr attr; - int tname; -}; - -struct coda_symlink_out { - struct coda_out_hdr out; -}; - -/* coda_readlink: */ -struct coda_readlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_readlink_out { - struct coda_out_hdr oh; - int count; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_fsync: NO_OUT */ -struct coda_fsync_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_fsync_out { - struct coda_out_hdr out; -}; - -/* coda_vget: */ -struct coda_vget_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_vget_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* CODA_SIGNAL is out-of-band, doesn't need data. */ -/* CODA_INVALIDATE is a venus->kernel call */ -/* CODA_FLUSH is a venus->kernel call */ - -/* coda_purgeuser: */ -/* CODA_PURGEUSER is a venus->kernel call */ -struct coda_purgeuser_out { - struct coda_out_hdr oh; - vuid_t uid; -}; - -/* coda_zapfile: */ -/* CODA_ZAPFILE is a venus->kernel call */ -struct coda_zapfile_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_zapdir: */ -/* CODA_ZAPDIR is a venus->kernel call */ -struct coda_zapdir_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_purgefid: */ -/* CODA_PURGEFID is a venus->kernel call */ -struct coda_purgefid_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_replace: */ -/* CODA_REPLACE is a venus->kernel call */ -struct coda_replace_out { /* coda_replace is a venus->kernel call */ - struct coda_out_hdr oh; - struct CodaFid NewFid; - struct CodaFid OldFid; -}; - -/* coda_open_by_fd: */ -struct coda_open_by_fd_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_fd_out { - struct coda_out_hdr oh; - int fd; - -#ifdef __KERNEL__ - struct file *fh; /* not passed from userspace but used in-kernel only */ -#endif -}; - -/* coda_open_by_path: */ -struct coda_open_by_path_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_path_out { - struct coda_out_hdr oh; - int path; -}; - -/* coda_statfs: NO_IN */ -struct coda_statfs_in { - struct coda_in_hdr in; -}; - -struct coda_statfs_out { - struct coda_out_hdr oh; - struct coda_statfs stat; -}; - -/* - * Occasionally, we don't cache the fid returned by CODA_LOOKUP. - * For instance, if the fid is inconsistent. - * This case is handled by setting the top bit of the type result parameter. - */ -#define CODA_NOCACHE 0x80000000 - -union inputArgs { - struct coda_in_hdr ih; /* NB: every struct below begins with an ih */ - struct coda_open_in coda_open; - struct coda_store_in coda_store; - struct coda_release_in coda_release; - struct coda_close_in coda_close; - struct coda_ioctl_in coda_ioctl; - struct coda_getattr_in coda_getattr; - struct coda_setattr_in coda_setattr; - struct coda_access_in coda_access; - struct coda_lookup_in coda_lookup; - struct coda_create_in coda_create; - struct coda_remove_in coda_remove; - struct coda_link_in coda_link; - struct coda_rename_in coda_rename; - struct coda_mkdir_in coda_mkdir; - struct coda_rmdir_in coda_rmdir; - struct coda_symlink_in coda_symlink; - struct coda_readlink_in coda_readlink; - struct coda_fsync_in coda_fsync; - struct coda_vget_in coda_vget; - struct coda_open_by_fd_in coda_open_by_fd; - struct coda_open_by_path_in coda_open_by_path; - struct coda_statfs_in coda_statfs; -}; - -union outputArgs { - struct coda_out_hdr oh; /* NB: every struct below begins with an oh */ - struct coda_root_out coda_root; - struct coda_open_out coda_open; - struct coda_ioctl_out coda_ioctl; - struct coda_getattr_out coda_getattr; - struct coda_lookup_out coda_lookup; - struct coda_create_out coda_create; - struct coda_mkdir_out coda_mkdir; - struct coda_readlink_out coda_readlink; - struct coda_vget_out coda_vget; - struct coda_purgeuser_out coda_purgeuser; - struct coda_zapfile_out coda_zapfile; - struct coda_zapdir_out coda_zapdir; - struct coda_purgefid_out coda_purgefid; - struct coda_replace_out coda_replace; - struct coda_open_by_fd_out coda_open_by_fd; - struct coda_open_by_path_out coda_open_by_path; - struct coda_statfs_out coda_statfs; -}; - -union coda_downcalls { - /* CODA_INVALIDATE is a venus->kernel call */ - /* CODA_FLUSH is a venus->kernel call */ - struct coda_purgeuser_out purgeuser; - struct coda_zapfile_out zapfile; - struct coda_zapdir_out zapdir; - struct coda_purgefid_out purgefid; - struct coda_replace_out replace; -}; - - -/* - * Used for identifying usage of "Control" and pioctls - */ - -#define PIOCPARM_MASK 0x0000ffff -struct ViceIoctl { - void __user *in; /* Data to be transferred in */ - void __user *out; /* Data to be transferred out */ - u_short in_size; /* Size of input buffer <= 2K */ - u_short out_size; /* Maximum size of output buffer, <= 2K */ -}; - -struct PioctlData { - const char __user *path; - int follow; - struct ViceIoctl vi; -}; - -#define CODA_CONTROL ".CONTROL" -#define CODA_CONTROLLEN 8 -#define CTL_INO -1 - -/* Data passed to mount */ - -#define CODA_MOUNT_VERSION 1 - -struct coda_mount_data { - int version; - int fd; /* Opened device */ -}; - -#endif - diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 72f2d2f0af91..8031d6eef102 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -1,14 +1,9 @@ #ifndef __CODA_PSDEV_H #define __CODA_PSDEV_H -#include - -#define CODA_PSDEV_MAJOR 67 -#define MAX_CODADEVS 5 /* how many do we allow */ - -#ifdef __KERNEL__ #include #include +#include struct kstatfs; @@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs); */ extern struct venus_comm coda_comms[]; -#endif /* __KERNEL__ */ - -/* messages between coda filesystem in kernel and Venus */ -struct upc_req { - struct list_head uc_chain; - caddr_t uc_data; - u_short uc_flags; - u_short uc_inSize; /* Size is at most 5000 bytes */ - u_short uc_outSize; - u_short uc_opcode; /* copied from data to save lookup */ - int uc_unique; - wait_queue_head_t uc_sleep; /* process' wait queue */ -}; - -#define CODA_REQ_ASYNC 0x1 -#define CODA_REQ_READ 0x2 -#define CODA_REQ_WRITE 0x4 -#define CODA_REQ_ABORT 0x8 - #endif diff --git a/include/linux/coff.h b/include/linux/coff.h deleted file mode 100644 index 6354a7fe22b2..000000000000 --- a/include/linux/coff.h +++ /dev/null @@ -1,351 +0,0 @@ -/* This file is derived from the GAS 2.1.4 assembler control file. - The GAS product is under the GNU General Public License, version 2 or later. - As such, this file is also under that license. - - If the file format changes in the COFF object, this file should be - subsequently updated to reflect the changes. - - The actual loader module only uses a few of these structures. The full - set is documented here because I received the full set. If you wish - more information about COFF, then O'Reilly has a very excellent book. -*/ - -#define E_SYMNMLEN 8 /* Number of characters in a symbol name */ -#define E_FILNMLEN 14 /* Number of characters in a file name */ -#define E_DIMNUM 4 /* Number of array dimensions in auxiliary entry */ - -/* - * These defines are byte order independent. There is no alignment of fields - * permitted in the structures. Therefore they are declared as characters - * and the values loaded from the character positions. It also makes it - * nice to have it "endian" independent. - */ - -/* Load a short int from the following tables with little-endian formats */ -#define COFF_SHORT_L(ps) ((short)(((unsigned short)((unsigned char)ps[1])<<8)|\ - ((unsigned short)((unsigned char)ps[0])))) - -/* Load a long int from the following tables with little-endian formats */ -#define COFF_LONG_L(ps) (((long)(((unsigned long)((unsigned char)ps[3])<<24) |\ - ((unsigned long)((unsigned char)ps[2])<<16) |\ - ((unsigned long)((unsigned char)ps[1])<<8) |\ - ((unsigned long)((unsigned char)ps[0]))))) - -/* Load a short int from the following tables with big-endian formats */ -#define COFF_SHORT_H(ps) ((short)(((unsigned short)((unsigned char)ps[0])<<8)|\ - ((unsigned short)((unsigned char)ps[1])))) - -/* Load a long int from the following tables with big-endian formats */ -#define COFF_LONG_H(ps) (((long)(((unsigned long)((unsigned char)ps[0])<<24) |\ - ((unsigned long)((unsigned char)ps[1])<<16) |\ - ((unsigned long)((unsigned char)ps[2])<<8) |\ - ((unsigned long)((unsigned char)ps[3]))))) - -/* These may be overridden later by brain dead implementations which generate - a big-endian header with little-endian data. In that case, generate a - replacement macro which tests a flag and uses either of the two above - as appropriate. */ - -#define COFF_LONG(v) COFF_LONG_L(v) -#define COFF_SHORT(v) COFF_SHORT_L(v) - -/*** coff information for Intel 386/486. */ - -/********************** FILE HEADER **********************/ - -struct COFF_filehdr { - char f_magic[2]; /* magic number */ - char f_nscns[2]; /* number of sections */ - char f_timdat[4]; /* time & date stamp */ - char f_symptr[4]; /* file pointer to symtab */ - char f_nsyms[4]; /* number of symtab entries */ - char f_opthdr[2]; /* sizeof(optional hdr) */ - char f_flags[2]; /* flags */ -}; - -/* - * Bits for f_flags: - * - * F_RELFLG relocation info stripped from file - * F_EXEC file is executable (i.e. no unresolved external - * references) - * F_LNNO line numbers stripped from file - * F_LSYMS local symbols stripped from file - * F_MINMAL this is a minimal object file (".m") output of fextract - * F_UPDATE this is a fully bound update file, output of ogen - * F_SWABD this file has had its bytes swabbed (in names) - * F_AR16WR this file has the byte ordering of an AR16WR - * (e.g. 11/70) machine - * F_AR32WR this file has the byte ordering of an AR32WR machine - * (e.g. vax and iNTEL 386) - * F_AR32W this file has the byte ordering of an AR32W machine - * (e.g. 3b,maxi) - * F_PATCH file contains "patch" list in optional header - * F_NODF (minimal file only) no decision functions for - * replaced functions - */ - -#define COFF_F_RELFLG 0000001 -#define COFF_F_EXEC 0000002 -#define COFF_F_LNNO 0000004 -#define COFF_F_LSYMS 0000010 -#define COFF_F_MINMAL 0000020 -#define COFF_F_UPDATE 0000040 -#define COFF_F_SWABD 0000100 -#define COFF_F_AR16WR 0000200 -#define COFF_F_AR32WR 0000400 -#define COFF_F_AR32W 0001000 -#define COFF_F_PATCH 0002000 -#define COFF_F_NODF 0002000 - -#define COFF_I386MAGIC 0x14c /* Linux's system */ - -#if 0 /* Perhaps, someday, these formats may be used. */ -#define COFF_I386PTXMAGIC 0x154 -#define COFF_I386AIXMAGIC 0x175 /* IBM's AIX system */ -#define COFF_I386BADMAG(x) ((COFF_SHORT((x).f_magic) != COFF_I386MAGIC) \ - && COFF_SHORT((x).f_magic) != COFF_I386PTXMAGIC \ - && COFF_SHORT((x).f_magic) != COFF_I386AIXMAGIC) -#else -#define COFF_I386BADMAG(x) (COFF_SHORT((x).f_magic) != COFF_I386MAGIC) -#endif - -#define COFF_FILHDR struct COFF_filehdr -#define COFF_FILHSZ sizeof(COFF_FILHDR) - -/********************** AOUT "OPTIONAL HEADER" **********************/ - -/* Linux COFF must have this "optional" header. Standard COFF has no entry - location for the "entry" point. They normally would start with the first - location of the .text section. This is not a good idea for linux. So, - the use of this "optional" header is not optional. It is required. - - Do not be tempted to assume that the size of the optional header is - a constant and simply index the next byte by the size of this structure. - Use the 'f_opthdr' field in the main coff header for the size of the - structure actually written to the file!! -*/ - -typedef struct -{ - char magic[2]; /* type of file */ - char vstamp[2]; /* version stamp */ - char tsize[4]; /* text size in bytes, padded to FW bdry */ - char dsize[4]; /* initialized data " " */ - char bsize[4]; /* uninitialized data " " */ - char entry[4]; /* entry pt. */ - char text_start[4]; /* base of text used for this file */ - char data_start[4]; /* base of data used for this file */ -} -COFF_AOUTHDR; - -#define COFF_AOUTSZ (sizeof(COFF_AOUTHDR)) - -#define COFF_STMAGIC 0401 -#define COFF_OMAGIC 0404 -#define COFF_JMAGIC 0407 /* dirty text and data image, can't share */ -#define COFF_DMAGIC 0410 /* dirty text segment, data aligned */ -#define COFF_ZMAGIC 0413 /* The proper magic number for executables */ -#define COFF_SHMAGIC 0443 /* shared library header */ - -/********************** SECTION HEADER **********************/ - -struct COFF_scnhdr { - char s_name[8]; /* section name */ - char s_paddr[4]; /* physical address, aliased s_nlib */ - char s_vaddr[4]; /* virtual address */ - char s_size[4]; /* section size */ - char s_scnptr[4]; /* file ptr to raw data for section */ - char s_relptr[4]; /* file ptr to relocation */ - char s_lnnoptr[4]; /* file ptr to line numbers */ - char s_nreloc[2]; /* number of relocation entries */ - char s_nlnno[2]; /* number of line number entries */ - char s_flags[4]; /* flags */ -}; - -#define COFF_SCNHDR struct COFF_scnhdr -#define COFF_SCNHSZ sizeof(COFF_SCNHDR) - -/* - * names of "special" sections - */ - -#define COFF_TEXT ".text" -#define COFF_DATA ".data" -#define COFF_BSS ".bss" -#define COFF_COMMENT ".comment" -#define COFF_LIB ".lib" - -#define COFF_SECT_TEXT 0 /* Section for instruction code */ -#define COFF_SECT_DATA 1 /* Section for initialized globals */ -#define COFF_SECT_BSS 2 /* Section for un-initialized globals */ -#define COFF_SECT_REQD 3 /* Minimum number of sections for good file */ - -#define COFF_STYP_REG 0x00 /* regular segment */ -#define COFF_STYP_DSECT 0x01 /* dummy segment */ -#define COFF_STYP_NOLOAD 0x02 /* no-load segment */ -#define COFF_STYP_GROUP 0x04 /* group segment */ -#define COFF_STYP_PAD 0x08 /* .pad segment */ -#define COFF_STYP_COPY 0x10 /* copy section */ -#define COFF_STYP_TEXT 0x20 /* .text segment */ -#define COFF_STYP_DATA 0x40 /* .data segment */ -#define COFF_STYP_BSS 0x80 /* .bss segment */ -#define COFF_STYP_INFO 0x200 /* .comment section */ -#define COFF_STYP_OVER 0x400 /* overlay section */ -#define COFF_STYP_LIB 0x800 /* library section */ - -/* - * Shared libraries have the following section header in the data field for - * each library. - */ - -struct COFF_slib { - char sl_entsz[4]; /* Size of this entry */ - char sl_pathndx[4]; /* size of the header field */ -}; - -#define COFF_SLIBHD struct COFF_slib -#define COFF_SLIBSZ sizeof(COFF_SLIBHD) - -/********************** LINE NUMBERS **********************/ - -/* 1 line number entry for every "breakpointable" source line in a section. - * Line numbers are grouped on a per function basis; first entry in a function - * grouping will have l_lnno = 0 and in place of physical address will be the - * symbol table index of the function name. - */ - -struct COFF_lineno { - union { - char l_symndx[4]; /* function name symbol index, iff l_lnno == 0*/ - char l_paddr[4]; /* (physical) address of line number */ - } l_addr; - char l_lnno[2]; /* line number */ -}; - -#define COFF_LINENO struct COFF_lineno -#define COFF_LINESZ 6 - -/********************** SYMBOLS **********************/ - -#define COFF_E_SYMNMLEN 8 /* # characters in a short symbol name */ -#define COFF_E_FILNMLEN 14 /* # characters in a file name */ -#define COFF_E_DIMNUM 4 /* # array dimensions in auxiliary entry */ - -/* - * All symbols and sections have the following definition - */ - -struct COFF_syment -{ - union { - char e_name[E_SYMNMLEN]; /* Symbol name (first 8 characters) */ - struct { - char e_zeroes[4]; /* Leading zeros */ - char e_offset[4]; /* Offset if this is a header section */ - } e; - } e; - - char e_value[4]; /* Value (address) of the segment */ - char e_scnum[2]; /* Section number */ - char e_type[2]; /* Type of section */ - char e_sclass[1]; /* Loader class */ - char e_numaux[1]; /* Number of auxiliary entries which follow */ -}; - -#define COFF_N_BTMASK (0xf) /* Mask for important class bits */ -#define COFF_N_TMASK (0x30) /* Mask for important type bits */ -#define COFF_N_BTSHFT (4) /* # bits to shift class field */ -#define COFF_N_TSHIFT (2) /* # bits to shift type field */ - -/* - * Auxiliary entries because the main table is too limiting. - */ - -union COFF_auxent { - -/* - * Debugger information - */ - - struct { - char x_tagndx[4]; /* str, un, or enum tag indx */ - union { - struct { - char x_lnno[2]; /* declaration line number */ - char x_size[2]; /* str/union/array size */ - } x_lnsz; - char x_fsize[4]; /* size of function */ - } x_misc; - - union { - struct { /* if ISFCN, tag, or .bb */ - char x_lnnoptr[4]; /* ptr to fcn line # */ - char x_endndx[4]; /* entry ndx past block end */ - } x_fcn; - - struct { /* if ISARY, up to 4 dimen. */ - char x_dimen[E_DIMNUM][2]; - } x_ary; - } x_fcnary; - - char x_tvndx[2]; /* tv index */ - } x_sym; - -/* - * Source file names (debugger information) - */ - - union { - char x_fname[E_FILNMLEN]; - struct { - char x_zeroes[4]; - char x_offset[4]; - } x_n; - } x_file; - -/* - * Section information - */ - - struct { - char x_scnlen[4]; /* section length */ - char x_nreloc[2]; /* # relocation entries */ - char x_nlinno[2]; /* # line numbers */ - } x_scn; - -/* - * Transfer vector (branch table) - */ - - struct { - char x_tvfill[4]; /* tv fill value */ - char x_tvlen[2]; /* length of .tv */ - char x_tvran[2][2]; /* tv range */ - } x_tv; /* info about .tv section (in auxent of symbol .tv)) */ -}; - -#define COFF_SYMENT struct COFF_syment -#define COFF_SYMESZ 18 -#define COFF_AUXENT union COFF_auxent -#define COFF_AUXESZ 18 - -#define COFF_ETEXT "etext" - -/********************** RELOCATION DIRECTIVES **********************/ - -struct COFF_reloc { - char r_vaddr[4]; /* Virtual address of item */ - char r_symndx[4]; /* Symbol index in the symtab */ - char r_type[2]; /* Relocation type */ -}; - -#define COFF_RELOC struct COFF_reloc -#define COFF_RELSZ 10 - -#define COFF_DEF_DATA_SECTION_ALIGNMENT 4 -#define COFF_DEF_BSS_SECTION_ALIGNMENT 4 -#define COFF_DEF_TEXT_SECTION_ALIGNMENT 4 - -/* For new sections we haven't heard of before */ -#define COFF_DEF_SECTION_ALIGNMENT 4 diff --git a/include/linux/connector.h b/include/linux/connector.h index 76384074262d..b2b5a41b6a24 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -18,63 +18,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #ifndef __CONNECTOR_H #define __CONNECTOR_H -#include - -/* - * Process Events connector unique ids -- used for message routing - */ -#define CN_IDX_PROC 0x1 -#define CN_VAL_PROC 0x1 -#define CN_IDX_CIFS 0x2 -#define CN_VAL_CIFS 0x1 -#define CN_W1_IDX 0x3 /* w1 communication */ -#define CN_W1_VAL 0x1 -#define CN_IDX_V86D 0x4 -#define CN_VAL_V86D_UVESAFB 0x1 -#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ -#define CN_DST_IDX 0x6 -#define CN_DST_VAL 0x1 -#define CN_IDX_DM 0x7 /* Device Mapper */ -#define CN_VAL_DM_USERSPACE_LOG 0x1 -#define CN_IDX_DRBD 0x8 -#define CN_VAL_DRBD 0x1 -#define CN_KVP_IDX 0x9 /* HyperV KVP */ -#define CN_KVP_VAL 0x1 /* queries from the kernel */ - -#define CN_NETLINK_USERS 10 /* Highest index + 1 */ - -/* - * Maximum connector's message size. - */ -#define CONNECTOR_MAX_MSG_SIZE 16384 - -/* - * idx and val are unique identifiers which - * are used for message routing and - * must be registered in connector.h for in-kernel usage. - */ - -struct cb_id { - __u32 idx; - __u32 val; -}; - -struct cn_msg { - struct cb_id id; - - __u32 seq; - __u32 ack; - - __u16 len; /* Length of the following data */ - __u16 flags; - __u8 data[0]; -}; - -#ifdef __KERNEL__ #include @@ -82,6 +28,7 @@ struct cn_msg { #include #include +#include #define CN_CBQ_NAMELEN 32 @@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev); int cn_cb_equal(struct cb_id *, struct cb_id *); -#endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ diff --git a/include/linux/const.h b/include/linux/const.h deleted file mode 100644 index c22c707c455d..000000000000 --- a/include/linux/const.h +++ /dev/null @@ -1,24 +0,0 @@ -/* const.h: Macros for dealing with constants. */ - -#ifndef _LINUX_CONST_H -#define _LINUX_CONST_H - -/* Some constant macros are used in both assembler and - * C code. Therefore we cannot annotate them always with - * 'UL' and other type specifiers unilaterally. We - * use the following macros to deal with this. - * - * Similarly, _AT() will cast an expression with a type in C, but - * leave it unchanged in asm. - */ - -#ifdef __ASSEMBLY__ -#define _AC(X,Y) X -#define _AT(T,X) X -#else -#define __AC(X,Y) (X##Y) -#define _AC(X,Y) __AC(X,Y) -#define _AT(T,X) ((T)(X)) -#endif - -#endif /* !(_LINUX_CONST_H) */ diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h index 0e7bf272ec2f..133789609f23 100644 --- a/include/linux/cramfs_fs.h +++ b/include/linux/cramfs_fs.h @@ -1,94 +1,10 @@ #ifndef __CRAMFS_H #define __CRAMFS_H -#include -#include +#include -#define CRAMFS_SIGNATURE "Compressed ROMFS" - -/* - * Width of various bitfields in struct cramfs_inode. - * Primarily used to generate warnings in mkcramfs. - */ -#define CRAMFS_MODE_WIDTH 16 -#define CRAMFS_UID_WIDTH 16 -#define CRAMFS_SIZE_WIDTH 24 -#define CRAMFS_GID_WIDTH 8 -#define CRAMFS_NAMELEN_WIDTH 6 -#define CRAMFS_OFFSET_WIDTH 26 - -/* - * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs - * path length is 63 << 2 = 252. - */ -#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2) - -/* - * Reasonably terse representation of the inode data. - */ -struct cramfs_inode { - __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH; - /* SIZE for device files is i_rdev */ - __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH; - /* NAMELEN is the length of the file name, divided by 4 and - rounded up. (cramfs doesn't support hard links.) */ - /* OFFSET: For symlinks and non-empty regular files, this - contains the offset (divided by 4) of the file data in - compressed form (starting with an array of block pointers; - see README). For non-empty directories it is the offset - (divided by 4) of the inode of the first file in that - directory. For anything else, offset is zero. */ - __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH; -}; - -struct cramfs_info { - __u32 crc; - __u32 edition; - __u32 blocks; - __u32 files; -}; - -/* - * Superblock information at the beginning of the FS. - */ -struct cramfs_super { - __u32 magic; /* 0x28cd3d45 - random number */ - __u32 size; /* length in bytes */ - __u32 flags; /* feature flags */ - __u32 future; /* reserved for future use */ - __u8 signature[16]; /* "Compressed ROMFS" */ - struct cramfs_info fsid; /* unique filesystem info */ - __u8 name[16]; /* user-defined name */ - struct cramfs_inode root; /* root inode data */ -}; - -/* - * Feature flags - * - * 0x00000000 - 0x000000ff: features that work for all past kernels - * 0x00000100 - 0xffffffff: features that don't work for past kernels - */ -#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */ -#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */ -#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */ -#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */ -#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */ - -/* - * Valid values in super.flags. Currently we refuse to mount - * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be - * changed to test super.future instead. - */ -#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \ - | CRAMFS_FLAG_HOLES \ - | CRAMFS_FLAG_WRONG_SIGNATURE \ - | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET ) - -#ifdef __KERNEL__ /* Uncompression interfaces to the underlying zlib */ int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen); int cramfs_uncompress_init(void); void cramfs_uncompress_exit(void); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/cuda.h b/include/linux/cuda.h index 9f9865ff781e..b72332823807 100644 --- a/include/linux/cuda.h +++ b/include/linux/cuda.h @@ -4,38 +4,15 @@ * * Copyright (C) 1996 Paul Mackerras. */ - #ifndef _LINUX_CUDA_H #define _LINUX_CUDA_H -/* CUDA commands (2nd byte) */ -#define CUDA_WARM_START 0 -#define CUDA_AUTOPOLL 1 -#define CUDA_GET_6805_ADDR 2 -#define CUDA_GET_TIME 3 -#define CUDA_GET_PRAM 7 -#define CUDA_SET_6805_ADDR 8 -#define CUDA_SET_TIME 9 -#define CUDA_POWERDOWN 0xa -#define CUDA_POWERUP_TIME 0xb -#define CUDA_SET_PRAM 0xc -#define CUDA_MS_RESET 0xd -#define CUDA_SEND_DFAC 0xe -#define CUDA_RESET_SYSTEM 0x11 -#define CUDA_SET_IPL 0x12 -#define CUDA_SET_AUTO_RATE 0x14 -#define CUDA_GET_AUTO_RATE 0x16 -#define CUDA_SET_DEVICE_LIST 0x19 -#define CUDA_GET_DEVICE_LIST 0x1a -#define CUDA_GET_SET_IIC 0x22 +#include -#ifdef __KERNEL__ extern int find_via_cuda(void); extern int cuda_request(struct adb_request *req, void (*done)(struct adb_request *), int nbytes, ...); extern void cuda_poll(void); -#endif /* __KERNEL */ - #endif /* _LINUX_CUDA_H */ diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a5049eaf782d..19ae518f5471 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -63,434 +63,11 @@ * * */ - #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H -#include - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_time_t in_use; /* Time device has been in use (secs) */ - __kernel_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif +#include -#ifdef __KERNEL__ /* Per card data structure */ struct cyclades_card { @@ -780,5 +357,4 @@ struct cyclades_port { /***************************************************************************/ -#endif /* __KERNEL__ */ #endif /* _LINUX_CYCLADES_H */ diff --git a/include/linux/cycx_cfm.h b/include/linux/cycx_cfm.h deleted file mode 100644 index 032d26ed8384..000000000000 --- a/include/linux/cycx_cfm.h +++ /dev/null @@ -1,101 +0,0 @@ -/* -* cycx_cfm.h Cyclom 2X WAN Link Driver. -* Definitions for the Cyclom 2X Firmware Module (CFM). -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdlasfm.h by Gene Kozin <74604.152@compuserve.com> -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1998/08/08 acme Initial version. -*/ -#ifndef _CYCX_CFM_H -#define _CYCX_CFM_H - -/* Defines */ - -#define CFM_VERSION 2 -#define CFM_SIGNATURE "CFM - Cyclades CYCX Firmware Module" - -/* min/max */ -#define CFM_IMAGE_SIZE 0x20000 /* max size of CYCX code image file */ -#define CFM_DESCR_LEN 256 /* max length of description string */ -#define CFM_MAX_CYCX 1 /* max number of compatible adapters */ -#define CFM_LOAD_BUFSZ 0x400 /* buffer size for reset code (buffer_load) */ - -/* Firmware Commands */ -#define GEN_POWER_ON 0x1280 - -#define GEN_SET_SEG 0x1401 /* boot segment setting. */ -#define GEN_BOOT_DAT 0x1402 /* boot data. */ -#define GEN_START 0x1403 /* board start. */ -#define GEN_DEFPAR 0x1404 /* buffer length for boot. */ - -/* Adapter Types */ -#define CYCX_2X 2 -/* for now only the 2X is supported, no plans to support 8X or 16X */ -#define CYCX_8X 8 -#define CYCX_16X 16 - -#define CFID_X25_2X 5200 - -/** - * struct cycx_fw_info - firmware module information. - * @codeid - firmware ID - * @version - firmware version number - * @adapter - compatible adapter types - * @memsize - minimum memory size - * @reserved - reserved - * @startoffs - entry point offset - * @winoffs - dual-port memory window offset - * @codeoffs - code load offset - * @codesize - code size - * @dataoffs - configuration data load offset - * @datasize - configuration data size - */ -struct cycx_fw_info { - unsigned short codeid; - unsigned short version; - unsigned short adapter[CFM_MAX_CYCX]; - unsigned long memsize; - unsigned short reserved[2]; - unsigned short startoffs; - unsigned short winoffs; - unsigned short codeoffs; - unsigned long codesize; - unsigned short dataoffs; - unsigned long datasize; -}; - -/** - * struct cycx_firmware - CYCX firmware file structure - * @signature - CFM file signature - * @version - file format version - * @checksum - info + image - * @reserved - reserved - * @descr - description string - * @info - firmware module info - * @image - code image (variable size) - */ -struct cycx_firmware { - char signature[80]; - unsigned short version; - unsigned short checksum; - unsigned short reserved[6]; - char descr[CFM_DESCR_LEN]; - struct cycx_fw_info info; - unsigned char image[0]; -}; - -struct cycx_fw_header { - unsigned long reset_size; - unsigned long data_size; - unsigned long code_size; -}; -#endif /* _CYCX_CFM_H */ diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h deleted file mode 100644 index 6bb43382f3f3..000000000000 --- a/include/linux/dcbnl.h +++ /dev/null @@ -1,684 +0,0 @@ -/* - * Copyright (c) 2008-2011, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 Temple - * Place - Suite 330, Boston, MA 02111-1307 USA. - * - * Author: Lucy Liu - */ - -#ifndef __LINUX_DCBNL_H__ -#define __LINUX_DCBNL_H__ - -#include - -/* IEEE 802.1Qaz std supported values */ -#define IEEE_8021QAZ_MAX_TCS 8 - -#define IEEE_8021QAZ_TSA_STRICT 0 -#define IEEE_8021QAZ_TSA_CB_SHAPER 1 -#define IEEE_8021QAZ_TSA_ETS 2 -#define IEEE_8021QAZ_TSA_VENDOR 255 - -/* This structure contains the IEEE 802.1Qaz ETS managed object - * - * @willing: willing bit in ETS configuration TLV - * @ets_cap: indicates supported capacity of ets feature - * @cbs: credit based shaper ets algorithm supported - * @tc_tx_bw: tc tx bandwidth indexed by traffic class - * @tc_rx_bw: tc rx bandwidth indexed by traffic class - * @tc_tsa: TSA Assignment table, indexed by traffic class - * @prio_tc: priority assignment table mapping 8021Qp to traffic class - * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV - * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV - * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV - * - * Recommended values are used to set fields in the ETS recommendation TLV - * with hardware offloaded LLDP. - * - * ---- - * TSA Assignment 8 bit identifiers - * 0 strict priority - * 1 credit-based shaper - * 2 enhanced transmission selection - * 3-254 reserved - * 255 vendor specific - */ -struct ieee_ets { - __u8 willing; - __u8 ets_cap; - __u8 cbs; - __u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS]; - __u8 tc_rx_bw[IEEE_8021QAZ_MAX_TCS]; - __u8 tc_tsa[IEEE_8021QAZ_MAX_TCS]; - __u8 prio_tc[IEEE_8021QAZ_MAX_TCS]; - __u8 tc_reco_bw[IEEE_8021QAZ_MAX_TCS]; - __u8 tc_reco_tsa[IEEE_8021QAZ_MAX_TCS]; - __u8 reco_prio_tc[IEEE_8021QAZ_MAX_TCS]; -}; - -/* This structure contains rate limit extension to the IEEE 802.1Qaz ETS - * managed object. - * Values are 64 bits long and specified in Kbps to enable usage over both - * slow and very fast networks. - * - * @tc_maxrate: maximal tc tx bandwidth indexed by traffic class - */ -struct ieee_maxrate { - __u64 tc_maxrate[IEEE_8021QAZ_MAX_TCS]; -}; - -/* This structure contains the IEEE 802.1Qaz PFC managed object - * - * @pfc_cap: Indicates the number of traffic classes on the local device - * that may simultaneously have PFC enabled. - * @pfc_en: bitmap indicating pfc enabled traffic classes - * @mbc: enable macsec bypass capability - * @delay: the allowance made for a round-trip propagation delay of the - * link in bits. - * @requests: count of the sent pfc frames - * @indications: count of the received pfc frames - */ -struct ieee_pfc { - __u8 pfc_cap; - __u8 pfc_en; - __u8 mbc; - __u16 delay; - __u64 requests[IEEE_8021QAZ_MAX_TCS]; - __u64 indications[IEEE_8021QAZ_MAX_TCS]; -}; - -/* CEE DCBX std supported values */ -#define CEE_DCBX_MAX_PGS 8 -#define CEE_DCBX_MAX_PRIO 8 - -/** - * struct cee_pg - CEE Priority-Group managed object - * - * @willing: willing bit in the PG tlv - * @error: error bit in the PG tlv - * @pg_en: enable bit of the PG feature - * @tcs_supported: number of traffic classes supported - * @pg_bw: bandwidth percentage for each priority group - * @prio_pg: priority to PG mapping indexed by priority - */ -struct cee_pg { - __u8 willing; - __u8 error; - __u8 pg_en; - __u8 tcs_supported; - __u8 pg_bw[CEE_DCBX_MAX_PGS]; - __u8 prio_pg[CEE_DCBX_MAX_PGS]; -}; - -/** - * struct cee_pfc - CEE PFC managed object - * - * @willing: willing bit in the PFC tlv - * @error: error bit in the PFC tlv - * @pfc_en: bitmap indicating pfc enabled traffic classes - * @tcs_supported: number of traffic classes supported - */ -struct cee_pfc { - __u8 willing; - __u8 error; - __u8 pfc_en; - __u8 tcs_supported; -}; - -/* IEEE 802.1Qaz std supported values */ -#define IEEE_8021QAZ_APP_SEL_ETHERTYPE 1 -#define IEEE_8021QAZ_APP_SEL_STREAM 2 -#define IEEE_8021QAZ_APP_SEL_DGRAM 3 -#define IEEE_8021QAZ_APP_SEL_ANY 4 - -/* This structure contains the IEEE 802.1Qaz APP managed object. This - * object is also used for the CEE std as well. There is no difference - * between the objects. - * - * @selector: protocol identifier type - * @protocol: protocol of type indicated - * @priority: 3-bit unsigned integer indicating priority - * - * ---- - * Selector field values - * 0 Reserved - * 1 Ethertype - * 2 Well known port number over TCP or SCTP - * 3 Well known port number over UDP or DCCP - * 4 Well known port number over TCP, SCTP, UDP, or DCCP - * 5-7 Reserved - */ -struct dcb_app { - __u8 selector; - __u8 priority; - __u16 protocol; -}; - -/** - * struct dcb_peer_app_info - APP feature information sent by the peer - * - * @willing: willing bit in the peer APP tlv - * @error: error bit in the peer APP tlv - * - * In addition to this information the full peer APP tlv also contains - * a table of 'app_count' APP objects defined above. - */ -struct dcb_peer_app_info { - __u8 willing; - __u8 error; -}; - -struct dcbmsg { - __u8 dcb_family; - __u8 cmd; - __u16 dcb_pad; -}; - -/** - * enum dcbnl_commands - supported DCB commands - * - * @DCB_CMD_UNDEFINED: unspecified command to catch errors - * @DCB_CMD_GSTATE: request the state of DCB in the device - * @DCB_CMD_SSTATE: set the state of DCB in the device - * @DCB_CMD_PGTX_GCFG: request the priority group configuration for Tx - * @DCB_CMD_PGTX_SCFG: set the priority group configuration for Tx - * @DCB_CMD_PGRX_GCFG: request the priority group configuration for Rx - * @DCB_CMD_PGRX_SCFG: set the priority group configuration for Rx - * @DCB_CMD_PFC_GCFG: request the priority flow control configuration - * @DCB_CMD_PFC_SCFG: set the priority flow control configuration - * @DCB_CMD_SET_ALL: apply all changes to the underlying device - * @DCB_CMD_GPERM_HWADDR: get the permanent MAC address of the underlying - * device. Only useful when using bonding. - * @DCB_CMD_GCAP: request the DCB capabilities of the device - * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported - * @DCB_CMD_SNUMTCS: set the number of traffic classes - * @DCB_CMD_GBCN: set backward congestion notification configuration - * @DCB_CMD_SBCN: get backward congestion notification configration. - * @DCB_CMD_GAPP: get application protocol configuration - * @DCB_CMD_SAPP: set application protocol configuration - * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration - * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration - * @DCB_CMD_GDCBX: get DCBX engine configuration - * @DCB_CMD_SDCBX: set DCBX engine configuration - * @DCB_CMD_GFEATCFG: get DCBX features flags - * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags - * @DCB_CMD_CEE_GET: get CEE aggregated configuration - * @DCB_CMD_IEEE_DEL: delete IEEE 802.1Qaz configuration - */ -enum dcbnl_commands { - DCB_CMD_UNDEFINED, - - DCB_CMD_GSTATE, - DCB_CMD_SSTATE, - - DCB_CMD_PGTX_GCFG, - DCB_CMD_PGTX_SCFG, - DCB_CMD_PGRX_GCFG, - DCB_CMD_PGRX_SCFG, - - DCB_CMD_PFC_GCFG, - DCB_CMD_PFC_SCFG, - - DCB_CMD_SET_ALL, - - DCB_CMD_GPERM_HWADDR, - - DCB_CMD_GCAP, - - DCB_CMD_GNUMTCS, - DCB_CMD_SNUMTCS, - - DCB_CMD_PFC_GSTATE, - DCB_CMD_PFC_SSTATE, - - DCB_CMD_BCN_GCFG, - DCB_CMD_BCN_SCFG, - - DCB_CMD_GAPP, - DCB_CMD_SAPP, - - DCB_CMD_IEEE_SET, - DCB_CMD_IEEE_GET, - - DCB_CMD_GDCBX, - DCB_CMD_SDCBX, - - DCB_CMD_GFEATCFG, - DCB_CMD_SFEATCFG, - - DCB_CMD_CEE_GET, - DCB_CMD_IEEE_DEL, - - __DCB_CMD_ENUM_MAX, - DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, -}; - -/** - * enum dcbnl_attrs - DCB top-level netlink attributes - * - * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING) - * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8) - * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8) - * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED) - * @DCB_ATTR_NUM_TC: number of traffic classes supported in the device (NLA_U8) - * @DCB_ATTR_PG_CFG: priority group configuration (NLA_NESTED) - * @DCB_ATTR_SET_ALL: bool to commit changes to hardware or not (NLA_U8) - * @DCB_ATTR_PERM_HWADDR: MAC address of the physical device (NLA_NESTED) - * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED) - * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED) - * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED) - * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED) - * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8) - * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED) - * @DCB_ATTR_CEE: CEE std supported attributes (NLA_NESTED) - */ -enum dcbnl_attrs { - DCB_ATTR_UNDEFINED, - - DCB_ATTR_IFNAME, - DCB_ATTR_STATE, - DCB_ATTR_PFC_STATE, - DCB_ATTR_PFC_CFG, - DCB_ATTR_NUM_TC, - DCB_ATTR_PG_CFG, - DCB_ATTR_SET_ALL, - DCB_ATTR_PERM_HWADDR, - DCB_ATTR_CAP, - DCB_ATTR_NUMTCS, - DCB_ATTR_BCN, - DCB_ATTR_APP, - - /* IEEE std attributes */ - DCB_ATTR_IEEE, - - DCB_ATTR_DCBX, - DCB_ATTR_FEATCFG, - - /* CEE nested attributes */ - DCB_ATTR_CEE, - - __DCB_ATTR_ENUM_MAX, - DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1, -}; - -/** - * enum ieee_attrs - IEEE 802.1Qaz get/set attributes - * - * @DCB_ATTR_IEEE_UNSPEC: unspecified - * @DCB_ATTR_IEEE_ETS: negotiated ETS configuration - * @DCB_ATTR_IEEE_PFC: negotiated PFC configuration - * @DCB_ATTR_IEEE_APP_TABLE: negotiated APP configuration - * @DCB_ATTR_IEEE_PEER_ETS: peer ETS configuration - get only - * @DCB_ATTR_IEEE_PEER_PFC: peer PFC configuration - get only - * @DCB_ATTR_IEEE_PEER_APP: peer APP tlv - get only - */ -enum ieee_attrs { - DCB_ATTR_IEEE_UNSPEC, - DCB_ATTR_IEEE_ETS, - DCB_ATTR_IEEE_PFC, - DCB_ATTR_IEEE_APP_TABLE, - DCB_ATTR_IEEE_PEER_ETS, - DCB_ATTR_IEEE_PEER_PFC, - DCB_ATTR_IEEE_PEER_APP, - DCB_ATTR_IEEE_MAXRATE, - __DCB_ATTR_IEEE_MAX -}; -#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1) - -enum ieee_attrs_app { - DCB_ATTR_IEEE_APP_UNSPEC, - DCB_ATTR_IEEE_APP, - __DCB_ATTR_IEEE_APP_MAX -}; -#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1) - -/** - * enum cee_attrs - CEE DCBX get attributes. - * - * @DCB_ATTR_CEE_UNSPEC: unspecified - * @DCB_ATTR_CEE_PEER_PG: peer PG configuration - get only - * @DCB_ATTR_CEE_PEER_PFC: peer PFC configuration - get only - * @DCB_ATTR_CEE_PEER_APP_TABLE: peer APP tlv - get only - * @DCB_ATTR_CEE_TX_PG: TX PG configuration (DCB_CMD_PGTX_GCFG) - * @DCB_ATTR_CEE_RX_PG: RX PG configuration (DCB_CMD_PGRX_GCFG) - * @DCB_ATTR_CEE_PFC: PFC configuration (DCB_CMD_PFC_GCFG) - * @DCB_ATTR_CEE_APP_TABLE: APP configuration (multi DCB_CMD_GAPP) - * @DCB_ATTR_CEE_FEAT: DCBX features flags (DCB_CMD_GFEATCFG) - * - * An aggregated collection of the cee std negotiated parameters. - */ -enum cee_attrs { - DCB_ATTR_CEE_UNSPEC, - DCB_ATTR_CEE_PEER_PG, - DCB_ATTR_CEE_PEER_PFC, - DCB_ATTR_CEE_PEER_APP_TABLE, - DCB_ATTR_CEE_TX_PG, - DCB_ATTR_CEE_RX_PG, - DCB_ATTR_CEE_PFC, - DCB_ATTR_CEE_APP_TABLE, - DCB_ATTR_CEE_FEAT, - __DCB_ATTR_CEE_MAX -}; -#define DCB_ATTR_CEE_MAX (__DCB_ATTR_CEE_MAX - 1) - -enum peer_app_attr { - DCB_ATTR_CEE_PEER_APP_UNSPEC, - DCB_ATTR_CEE_PEER_APP_INFO, - DCB_ATTR_CEE_PEER_APP, - __DCB_ATTR_CEE_PEER_APP_MAX -}; -#define DCB_ATTR_CEE_PEER_APP_MAX (__DCB_ATTR_CEE_PEER_APP_MAX - 1) - -enum cee_attrs_app { - DCB_ATTR_CEE_APP_UNSPEC, - DCB_ATTR_CEE_APP, - __DCB_ATTR_CEE_APP_MAX -}; -#define DCB_ATTR_CEE_APP_MAX (__DCB_ATTR_CEE_APP_MAX - 1) - -/** - * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs - * - * @DCB_PFC_UP_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_PFC_UP_ATTR_0: Priority Flow Control value for User Priority 0 (NLA_U8) - * @DCB_PFC_UP_ATTR_1: Priority Flow Control value for User Priority 1 (NLA_U8) - * @DCB_PFC_UP_ATTR_2: Priority Flow Control value for User Priority 2 (NLA_U8) - * @DCB_PFC_UP_ATTR_3: Priority Flow Control value for User Priority 3 (NLA_U8) - * @DCB_PFC_UP_ATTR_4: Priority Flow Control value for User Priority 4 (NLA_U8) - * @DCB_PFC_UP_ATTR_5: Priority Flow Control value for User Priority 5 (NLA_U8) - * @DCB_PFC_UP_ATTR_6: Priority Flow Control value for User Priority 6 (NLA_U8) - * @DCB_PFC_UP_ATTR_7: Priority Flow Control value for User Priority 7 (NLA_U8) - * @DCB_PFC_UP_ATTR_MAX: highest attribute number currently defined - * @DCB_PFC_UP_ATTR_ALL: apply to all priority flow control attrs (NLA_FLAG) - * - */ -enum dcbnl_pfc_up_attrs { - DCB_PFC_UP_ATTR_UNDEFINED, - - DCB_PFC_UP_ATTR_0, - DCB_PFC_UP_ATTR_1, - DCB_PFC_UP_ATTR_2, - DCB_PFC_UP_ATTR_3, - DCB_PFC_UP_ATTR_4, - DCB_PFC_UP_ATTR_5, - DCB_PFC_UP_ATTR_6, - DCB_PFC_UP_ATTR_7, - DCB_PFC_UP_ATTR_ALL, - - __DCB_PFC_UP_ATTR_ENUM_MAX, - DCB_PFC_UP_ATTR_MAX = __DCB_PFC_UP_ATTR_ENUM_MAX - 1, -}; - -/** - * enum dcbnl_pg_attrs - DCB Priority Group attributes - * - * @DCB_PG_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_PG_ATTR_TC_0: Priority Group Traffic Class 0 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_1: Priority Group Traffic Class 1 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_2: Priority Group Traffic Class 2 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_3: Priority Group Traffic Class 3 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_4: Priority Group Traffic Class 4 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_5: Priority Group Traffic Class 5 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_6: Priority Group Traffic Class 6 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_7: Priority Group Traffic Class 7 configuration (NLA_NESTED) - * @DCB_PG_ATTR_TC_MAX: highest attribute number currently defined - * @DCB_PG_ATTR_TC_ALL: apply to all traffic classes (NLA_NESTED) - * @DCB_PG_ATTR_BW_ID_0: Percent of link bandwidth for Priority Group 0 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_1: Percent of link bandwidth for Priority Group 1 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_2: Percent of link bandwidth for Priority Group 2 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_3: Percent of link bandwidth for Priority Group 3 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_4: Percent of link bandwidth for Priority Group 4 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_5: Percent of link bandwidth for Priority Group 5 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_6: Percent of link bandwidth for Priority Group 6 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_7: Percent of link bandwidth for Priority Group 7 (NLA_U8) - * @DCB_PG_ATTR_BW_ID_MAX: highest attribute number currently defined - * @DCB_PG_ATTR_BW_ID_ALL: apply to all priority groups (NLA_FLAG) - * - */ -enum dcbnl_pg_attrs { - DCB_PG_ATTR_UNDEFINED, - - DCB_PG_ATTR_TC_0, - DCB_PG_ATTR_TC_1, - DCB_PG_ATTR_TC_2, - DCB_PG_ATTR_TC_3, - DCB_PG_ATTR_TC_4, - DCB_PG_ATTR_TC_5, - DCB_PG_ATTR_TC_6, - DCB_PG_ATTR_TC_7, - DCB_PG_ATTR_TC_MAX, - DCB_PG_ATTR_TC_ALL, - - DCB_PG_ATTR_BW_ID_0, - DCB_PG_ATTR_BW_ID_1, - DCB_PG_ATTR_BW_ID_2, - DCB_PG_ATTR_BW_ID_3, - DCB_PG_ATTR_BW_ID_4, - DCB_PG_ATTR_BW_ID_5, - DCB_PG_ATTR_BW_ID_6, - DCB_PG_ATTR_BW_ID_7, - DCB_PG_ATTR_BW_ID_MAX, - DCB_PG_ATTR_BW_ID_ALL, - - __DCB_PG_ATTR_ENUM_MAX, - DCB_PG_ATTR_MAX = __DCB_PG_ATTR_ENUM_MAX - 1, -}; - -/** - * enum dcbnl_tc_attrs - DCB Traffic Class attributes - * - * @DCB_TC_ATTR_PARAM_UNDEFINED: unspecified attribute to catch errors - * @DCB_TC_ATTR_PARAM_PGID: (NLA_U8) Priority group the traffic class belongs to - * Valid values are: 0-7 - * @DCB_TC_ATTR_PARAM_UP_MAPPING: (NLA_U8) Traffic class to user priority map - * Some devices may not support changing the - * user priority map of a TC. - * @DCB_TC_ATTR_PARAM_STRICT_PRIO: (NLA_U8) Strict priority setting - * 0 - none - * 1 - group strict - * 2 - link strict - * @DCB_TC_ATTR_PARAM_BW_PCT: optional - (NLA_U8) If supported by the device and - * not configured to use link strict priority, - * this is the percentage of bandwidth of the - * priority group this traffic class belongs to - * @DCB_TC_ATTR_PARAM_ALL: (NLA_FLAG) all traffic class parameters - * - */ -enum dcbnl_tc_attrs { - DCB_TC_ATTR_PARAM_UNDEFINED, - - DCB_TC_ATTR_PARAM_PGID, - DCB_TC_ATTR_PARAM_UP_MAPPING, - DCB_TC_ATTR_PARAM_STRICT_PRIO, - DCB_TC_ATTR_PARAM_BW_PCT, - DCB_TC_ATTR_PARAM_ALL, - - __DCB_TC_ATTR_PARAM_ENUM_MAX, - DCB_TC_ATTR_PARAM_MAX = __DCB_TC_ATTR_PARAM_ENUM_MAX - 1, -}; - -/** - * enum dcbnl_cap_attrs - DCB Capability attributes - * - * @DCB_CAP_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_CAP_ATTR_ALL: (NLA_FLAG) all capability parameters - * @DCB_CAP_ATTR_PG: (NLA_U8) device supports Priority Groups - * @DCB_CAP_ATTR_PFC: (NLA_U8) device supports Priority Flow Control - * @DCB_CAP_ATTR_UP2TC: (NLA_U8) device supports user priority to - * traffic class mapping - * @DCB_CAP_ATTR_PG_TCS: (NLA_U8) bitmap where each bit represents a - * number of traffic classes the device - * can be configured to use for Priority Groups - * @DCB_CAP_ATTR_PFC_TCS: (NLA_U8) bitmap where each bit represents a - * number of traffic classes the device can be - * configured to use for Priority Flow Control - * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority - * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion - * Notification - * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine - * - */ -enum dcbnl_cap_attrs { - DCB_CAP_ATTR_UNDEFINED, - DCB_CAP_ATTR_ALL, - DCB_CAP_ATTR_PG, - DCB_CAP_ATTR_PFC, - DCB_CAP_ATTR_UP2TC, - DCB_CAP_ATTR_PG_TCS, - DCB_CAP_ATTR_PFC_TCS, - DCB_CAP_ATTR_GSP, - DCB_CAP_ATTR_BCN, - DCB_CAP_ATTR_DCBX, - - __DCB_CAP_ATTR_ENUM_MAX, - DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1, -}; - -/** - * DCBX capability flags - * - * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent. - * 'set' routines are used to configure the device with - * the negotiated parameters - * - * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but - * by another entity - * 'get' routines are used to retrieve the - * negotiated parameters - * 'set' routines can be used to set the initial - * negotiation configuration - * - * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine - * supports the CEE protocol flavor - * - * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine - * supports the IEEE protocol flavor - * - * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine - * supports static configuration (i.e no actual - * negotiation is performed negotiated parameters equal - * the initial configuration) - * - */ -#define DCB_CAP_DCBX_HOST 0x01 -#define DCB_CAP_DCBX_LLD_MANAGED 0x02 -#define DCB_CAP_DCBX_VER_CEE 0x04 -#define DCB_CAP_DCBX_VER_IEEE 0x08 -#define DCB_CAP_DCBX_STATIC 0x10 - -/** - * enum dcbnl_numtcs_attrs - number of traffic classes - * - * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_NUMTCS_ATTR_ALL: (NLA_FLAG) all traffic class attributes - * @DCB_NUMTCS_ATTR_PG: (NLA_U8) number of traffic classes used for - * priority groups - * @DCB_NUMTCS_ATTR_PFC: (NLA_U8) number of traffic classes which can - * support priority flow control - */ -enum dcbnl_numtcs_attrs { - DCB_NUMTCS_ATTR_UNDEFINED, - DCB_NUMTCS_ATTR_ALL, - DCB_NUMTCS_ATTR_PG, - DCB_NUMTCS_ATTR_PFC, - - __DCB_NUMTCS_ATTR_ENUM_MAX, - DCB_NUMTCS_ATTR_MAX = __DCB_NUMTCS_ATTR_ENUM_MAX - 1, -}; - -enum dcbnl_bcn_attrs{ - DCB_BCN_ATTR_UNDEFINED = 0, - - DCB_BCN_ATTR_RP_0, - DCB_BCN_ATTR_RP_1, - DCB_BCN_ATTR_RP_2, - DCB_BCN_ATTR_RP_3, - DCB_BCN_ATTR_RP_4, - DCB_BCN_ATTR_RP_5, - DCB_BCN_ATTR_RP_6, - DCB_BCN_ATTR_RP_7, - DCB_BCN_ATTR_RP_ALL, - - DCB_BCN_ATTR_BCNA_0, - DCB_BCN_ATTR_BCNA_1, - DCB_BCN_ATTR_ALPHA, - DCB_BCN_ATTR_BETA, - DCB_BCN_ATTR_GD, - DCB_BCN_ATTR_GI, - DCB_BCN_ATTR_TMAX, - DCB_BCN_ATTR_TD, - DCB_BCN_ATTR_RMIN, - DCB_BCN_ATTR_W, - DCB_BCN_ATTR_RD, - DCB_BCN_ATTR_RU, - DCB_BCN_ATTR_WRTT, - DCB_BCN_ATTR_RI, - DCB_BCN_ATTR_C, - DCB_BCN_ATTR_ALL, - - __DCB_BCN_ATTR_ENUM_MAX, - DCB_BCN_ATTR_MAX = __DCB_BCN_ATTR_ENUM_MAX - 1, -}; - -/** - * enum dcb_general_attr_values - general DCB attribute values - * - * @DCB_ATTR_UNDEFINED: value used to indicate an attribute is not supported - * - */ -enum dcb_general_attr_values { - DCB_ATTR_VALUE_UNDEFINED = 0xff -}; - -#define DCB_APP_IDTYPE_ETHTYPE 0x00 -#define DCB_APP_IDTYPE_PORTNUM 0x01 -enum dcbnl_app_attrs { - DCB_APP_ATTR_UNDEFINED, - - DCB_APP_ATTR_IDTYPE, - DCB_APP_ATTR_ID, - DCB_APP_ATTR_PRIORITY, - - __DCB_APP_ATTR_ENUM_MAX, - DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1, -}; - -/** - * enum dcbnl_featcfg_attrs - features conifiguration flags - * - * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors - * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes - * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups - * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority - * flow control - * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV - * - */ -#define DCB_FEATCFG_ERROR 0x01 /* error in feature resolution */ -#define DCB_FEATCFG_ENABLE 0x02 /* enable feature */ -#define DCB_FEATCFG_WILLING 0x04 /* feature is willing */ -#define DCB_FEATCFG_ADVERTISE 0x08 /* advertise feature */ -enum dcbnl_featcfg_attrs { - DCB_FEATCFG_ATTR_UNDEFINED, - DCB_FEATCFG_ATTR_ALL, - DCB_FEATCFG_ATTR_PG, - DCB_FEATCFG_ATTR_PFC, - DCB_FEATCFG_ATTR_APP, - - __DCB_FEATCFG_ATTR_ENUM_MAX, - DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1, -}; - -#endif /* __LINUX_DCBNL_H__ */ diff --git a/include/linux/dccp.h b/include/linux/dccp.h index d16294e2a118..439ff698000a 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -1,239 +1,6 @@ #ifndef _LINUX_DCCP_H #define _LINUX_DCCP_H -#include -#include - -/** - * struct dccp_hdr - generic part of DCCP packet header - * - * @dccph_sport - Relevant port on the endpoint that sent this packet - * @dccph_dport - Relevant port on the other endpoint - * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words - * @dccph_ccval - Used by the HC-Sender CCID - * @dccph_cscov - Parts of the packet that are covered by the Checksum field - * @dccph_checksum - Internet checksum, depends on dccph_cscov - * @dccph_x - 0 = 24 bit sequence number, 1 = 48 - * @dccph_type - packet type, see DCCP_PKT_ prefixed macros - * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x - */ -struct dccp_hdr { - __be16 dccph_sport, - dccph_dport; - __u8 dccph_doff; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_cscov:4, - dccph_ccval:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_ccval:4, - dccph_cscov:4; -#else -#error "Adjust your defines" -#endif - __sum16 dccph_checksum; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_x:1, - dccph_type:4, - dccph_reserved:3; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_reserved:3, - dccph_type:4, - dccph_x:1; -#else -#error "Adjust your defines" -#endif - __u8 dccph_seq2; - __be16 dccph_seq; -}; - -/** - * struct dccp_hdr_ext - the low bits of a 48 bit seq packet - * - * @dccph_seq_low - low 24 bits of a 48 bit seq packet - */ -struct dccp_hdr_ext { - __be32 dccph_seq_low; -}; - -/** - * struct dccp_hdr_request - Connection initiation request header - * - * @dccph_req_service - Service to which the client app wants to connect - */ -struct dccp_hdr_request { - __be32 dccph_req_service; -}; -/** - * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets - * - * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR - * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR - */ -struct dccp_hdr_ack_bits { - __be16 dccph_reserved1; - __be16 dccph_ack_nr_high; - __be32 dccph_ack_nr_low; -}; -/** - * struct dccp_hdr_response - Connection initiation response header - * - * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3) - * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request - */ -struct dccp_hdr_response { - struct dccp_hdr_ack_bits dccph_resp_ack; - __be32 dccph_resp_service; -}; - -/** - * struct dccp_hdr_reset - Unconditionally shut down a connection - * - * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6) - * @dccph_reset_code - one of %dccp_reset_codes - * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6 - */ -struct dccp_hdr_reset { - struct dccp_hdr_ack_bits dccph_reset_ack; - __u8 dccph_reset_code, - dccph_reset_data[3]; -}; - -enum dccp_pkt_type { - DCCP_PKT_REQUEST = 0, - DCCP_PKT_RESPONSE, - DCCP_PKT_DATA, - DCCP_PKT_ACK, - DCCP_PKT_DATAACK, - DCCP_PKT_CLOSEREQ, - DCCP_PKT_CLOSE, - DCCP_PKT_RESET, - DCCP_PKT_SYNC, - DCCP_PKT_SYNCACK, - DCCP_PKT_INVALID, -}; - -#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID - -static inline unsigned int dccp_packet_hdr_len(const __u8 type) -{ - if (type == DCCP_PKT_DATA) - return 0; - if (type == DCCP_PKT_DATAACK || - type == DCCP_PKT_ACK || - type == DCCP_PKT_SYNC || - type == DCCP_PKT_SYNCACK || - type == DCCP_PKT_CLOSE || - type == DCCP_PKT_CLOSEREQ) - return sizeof(struct dccp_hdr_ack_bits); - if (type == DCCP_PKT_REQUEST) - return sizeof(struct dccp_hdr_request); - if (type == DCCP_PKT_RESPONSE) - return sizeof(struct dccp_hdr_response); - return sizeof(struct dccp_hdr_reset); -} -enum dccp_reset_codes { - DCCP_RESET_CODE_UNSPECIFIED = 0, - DCCP_RESET_CODE_CLOSED, - DCCP_RESET_CODE_ABORTED, - DCCP_RESET_CODE_NO_CONNECTION, - DCCP_RESET_CODE_PACKET_ERROR, - DCCP_RESET_CODE_OPTION_ERROR, - DCCP_RESET_CODE_MANDATORY_ERROR, - DCCP_RESET_CODE_CONNECTION_REFUSED, - DCCP_RESET_CODE_BAD_SERVICE_CODE, - DCCP_RESET_CODE_TOO_BUSY, - DCCP_RESET_CODE_BAD_INIT_COOKIE, - DCCP_RESET_CODE_AGGRESSION_PENALTY, - - DCCP_MAX_RESET_CODES /* Leave at the end! */ -}; - -/* DCCP options */ -enum { - DCCPO_PADDING = 0, - DCCPO_MANDATORY = 1, - DCCPO_MIN_RESERVED = 3, - DCCPO_MAX_RESERVED = 31, - DCCPO_CHANGE_L = 32, - DCCPO_CONFIRM_L = 33, - DCCPO_CHANGE_R = 34, - DCCPO_CONFIRM_R = 35, - DCCPO_NDP_COUNT = 37, - DCCPO_ACK_VECTOR_0 = 38, - DCCPO_ACK_VECTOR_1 = 39, - DCCPO_TIMESTAMP = 41, - DCCPO_TIMESTAMP_ECHO = 42, - DCCPO_ELAPSED_TIME = 43, - DCCPO_MAX = 45, - DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ - DCCPO_MAX_RX_CCID_SPECIFIC = 191, - DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ - DCCPO_MAX_TX_CCID_SPECIFIC = 255, -}; -/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ -#define DCCP_SINGLE_OPT_MAXLEN 253 - -/* DCCP CCIDS */ -enum { - DCCPC_CCID2 = 2, - DCCPC_CCID3 = 3, -}; - -/* DCCP features (RFC 4340 section 6.4) */ -enum dccp_feature_numbers { - DCCPF_RESERVED = 0, - DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, - DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, - DCCPF_ACK_RATIO = 5, - DCCPF_SEND_ACK_VECTOR = 6, - DCCPF_SEND_NDP_COUNT = 7, - DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, - /* 10-127 reserved */ - DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ - DCCPF_MAX_CCID_SPECIFIC = 255, -}; - -/* DCCP socket control message types for cmsg */ -enum dccp_cmsg_type { - DCCP_SCM_PRIORITY = 1, - DCCP_SCM_QPOLICY_MAX = 0xFFFF, - /* ^-- Up to here reserved exclusively for qpolicy parameters */ - DCCP_SCM_MAX -}; - -/* DCCP priorities for outgoing/queued packets */ -enum dccp_packet_dequeueing_policy { - DCCPQ_POLICY_SIMPLE, - DCCPQ_POLICY_PRIO, - DCCPQ_POLICY_MAX -}; - -/* DCCP socket options */ -#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ -#define DCCP_SOCKOPT_SERVICE 2 -#define DCCP_SOCKOPT_CHANGE_L 3 -#define DCCP_SOCKOPT_CHANGE_R 4 -#define DCCP_SOCKOPT_GET_CUR_MPS 5 -#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 -#define DCCP_SOCKOPT_SEND_CSCOV 10 -#define DCCP_SOCKOPT_RECV_CSCOV 11 -#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 -#define DCCP_SOCKOPT_CCID 13 -#define DCCP_SOCKOPT_TX_CCID 14 -#define DCCP_SOCKOPT_RX_CCID 15 -#define DCCP_SOCKOPT_QPOLICY_ID 16 -#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 -#define DCCP_SOCKOPT_CCID_RX_INFO 128 -#define DCCP_SOCKOPT_CCID_TX_INFO 192 - -/* maximum number of services provided on the same listening port */ -#define DCCP_SERVICE_LIST_MAX_LEN 32 - -#ifdef __KERNEL__ #include #include @@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy { #include #include #include +#include enum dccp_state { DCCP_OPEN = TCP_ESTABLISHED, @@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk) extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req); -#endif /* __KERNEL__ */ - #endif /* _LINUX_DCCP_H */ diff --git a/include/linux/dlm.h b/include/linux/dlm.h index 520152411cd1..1d47dcce11e1 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -10,68 +10,11 @@ ** ******************************************************************************* ******************************************************************************/ - #ifndef __DLM_DOT_H__ #define __DLM_DOT_H__ -/* - * Interface to Distributed Lock Manager (DLM) - * routines and structures to use DLM lockspaces - */ - -/* Lock levels and flags are here */ -#include -#include - -typedef void dlm_lockspace_t; - -/* - * Lock status block - * - * Use this structure to specify the contents of the lock value block. For a - * conversion request, this structure is used to specify the lock ID of the - * lock. DLM writes the status of the lock request and the lock ID assigned - * to the request in the lock status block. - * - * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests. - * It is available when dlm_lock returns. - * - * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules - * shown for the DLM_LKF_VALBLK flag. - * - * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock, - * it was first demoted to NL to avoid conversion deadlock. - * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid. - * - * sb_status: the returned status of the lock request set prior to AST - * execution. Possible return values: - * - * 0 if lock request was successful - * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE - * -DLM_EUNLOCK if unlock request was successful - * -DLM_ECANCEL if a cancel completed successfully - * -EDEADLK if a deadlock was detected - * -ETIMEDOUT if the lock request was canceled due to a timeout - */ - -#define DLM_SBF_DEMOTED 0x01 -#define DLM_SBF_VALNOTVALID 0x02 -#define DLM_SBF_ALTMODE 0x04 +#include -struct dlm_lksb { - int sb_status; - __u32 sb_lkid; - char sb_flags; - char * sb_lvbptr; -}; - -/* dlm_new_lockspace() flags */ - -#define DLM_LSFL_TIMEWARN 0x00000002 -#define DLM_LSFL_FS 0x00000004 -#define DLM_LSFL_NEWEXCL 0x00000008 - -#ifdef __KERNEL__ struct dlm_slot { int nodeid; /* 1 to MAX_INT */ @@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace, struct dlm_lksb *lksb, void *astarg); -#endif /* __KERNEL__ */ - #endif /* __DLM_DOT_H__ */ - diff --git a/include/linux/dlm_device.h b/include/linux/dlm_device.h deleted file mode 100644 index 3060783c4191..000000000000 --- a/include/linux/dlm_device.h +++ /dev/null @@ -1,108 +0,0 @@ -/****************************************************************************** -******************************************************************************* -** -** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. -** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved. -** -** This copyrighted material is made available to anyone wishing to use, -** modify, copy, or redistribute it subject to the terms and conditions -** of the GNU General Public License v.2. -** -******************************************************************************* -******************************************************************************/ - -#ifndef _LINUX_DLM_DEVICE_H -#define _LINUX_DLM_DEVICE_H - -/* This is the device interface for dlm, most users will use a library - * interface. - */ - -#include -#include - -#define DLM_USER_LVB_LEN 32 - -/* Version of the device interface */ -#define DLM_DEVICE_VERSION_MAJOR 6 -#define DLM_DEVICE_VERSION_MINOR 0 -#define DLM_DEVICE_VERSION_PATCH 1 - -/* struct passed to the lock write */ -struct dlm_lock_params { - __u8 mode; - __u8 namelen; - __u16 unused; - __u32 flags; - __u32 lkid; - __u32 parent; - __u64 xid; - __u64 timeout; - void __user *castparam; - void __user *castaddr; - void __user *bastparam; - void __user *bastaddr; - struct dlm_lksb __user *lksb; - char lvb[DLM_USER_LVB_LEN]; - char name[0]; -}; - -struct dlm_lspace_params { - __u32 flags; - __u32 minor; - char name[0]; -}; - -struct dlm_purge_params { - __u32 nodeid; - __u32 pid; -}; - -struct dlm_write_request { - __u32 version[3]; - __u8 cmd; - __u8 is64bit; - __u8 unused[2]; - - union { - struct dlm_lock_params lock; - struct dlm_lspace_params lspace; - struct dlm_purge_params purge; - } i; -}; - -struct dlm_device_version { - __u32 version[3]; -}; - -/* struct read from the "device" fd, - consists mainly of userspace pointers for the library to use */ - -struct dlm_lock_result { - __u32 version[3]; - __u32 length; - void __user * user_astaddr; - void __user * user_astparam; - struct dlm_lksb __user * user_lksb; - struct dlm_lksb lksb; - __u8 bast_mode; - __u8 unused[3]; - /* Offsets may be zero if no data is present */ - __u32 lvb_offset; -}; - -/* Commands passed to the device */ -#define DLM_USER_LOCK 1 -#define DLM_USER_UNLOCK 2 -#define DLM_USER_QUERY 3 -#define DLM_USER_CREATE_LOCKSPACE 4 -#define DLM_USER_REMOVE_LOCKSPACE 5 -#define DLM_USER_PURGE 6 -#define DLM_USER_DEADLOCK 7 - -/* Lockspace flags */ -#define DLM_USER_LSFLG_AUTOFREE 1 -#define DLM_USER_LSFLG_FORCEFREE 2 - -#endif - diff --git a/include/linux/dlm_netlink.h b/include/linux/dlm_netlink.h deleted file mode 100644 index 647c8ef27227..000000000000 --- a/include/linux/dlm_netlink.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2007 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - */ - -#ifndef _DLM_NETLINK_H -#define _DLM_NETLINK_H - -#include - -enum { - DLM_STATUS_WAITING = 1, - DLM_STATUS_GRANTED = 2, - DLM_STATUS_CONVERT = 3, -}; - -#define DLM_LOCK_DATA_VERSION 1 - -struct dlm_lock_data { - __u16 version; - __u32 lockspace_id; - int nodeid; - int ownpid; - __u32 id; - __u32 remid; - __u64 xid; - __s8 status; - __s8 grmode; - __s8 rqmode; - unsigned long timestamp; - int resource_namelen; - char resource_name[DLM_RESNAME_MAXLEN]; -}; - -enum { - DLM_CMD_UNSPEC = 0, - DLM_CMD_HELLO, /* user->kernel */ - DLM_CMD_TIMEOUT, /* kernel->user */ - __DLM_CMD_MAX, -}; - -#define DLM_CMD_MAX (__DLM_CMD_MAX - 1) - -enum { - DLM_TYPE_UNSPEC = 0, - DLM_TYPE_LOCK, - __DLM_TYPE_MAX, -}; - -#define DLM_TYPE_MAX (__DLM_TYPE_MAX - 1) - -#define DLM_GENL_VERSION 0x1 -#define DLM_GENL_NAME "DLM" - -#endif /* _DLM_NETLINK_H */ diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h index 3b1cc1be419f..95ad387a7769 100644 --- a/include/linux/dlm_plock.h +++ b/include/linux/dlm_plock.h @@ -5,50 +5,15 @@ * modify, copy, or redistribute it subject to the terms and conditions * of the GNU General Public License v.2. */ - #ifndef __DLM_PLOCK_DOT_H__ #define __DLM_PLOCK_DOT_H__ -#include - -#define DLM_PLOCK_MISC_NAME "dlm_plock" - -#define DLM_PLOCK_VERSION_MAJOR 1 -#define DLM_PLOCK_VERSION_MINOR 2 -#define DLM_PLOCK_VERSION_PATCH 0 - -enum { - DLM_PLOCK_OP_LOCK = 1, - DLM_PLOCK_OP_UNLOCK, - DLM_PLOCK_OP_GET, -}; +#include -#define DLM_PLOCK_FL_CLOSE 1 - -struct dlm_plock_info { - __u32 version[3]; - __u8 optype; - __u8 ex; - __u8 wait; - __u8 flags; - __u32 pid; - __s32 nodeid; - __s32 rv; - __u32 fsid; - __u64 number; - __u64 start; - __u64 end; - __u64 owner; -}; - -#ifdef __KERNEL__ int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file, int cmd, struct file_lock *fl); int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h deleted file mode 100644 index 47bf08dc7566..000000000000 --- a/include/linux/dlmconstants.h +++ /dev/null @@ -1,163 +0,0 @@ -/****************************************************************************** -******************************************************************************* -** -** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. -** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved. -** -** This copyrighted material is made available to anyone wishing to use, -** modify, copy, or redistribute it subject to the terms and conditions -** of the GNU General Public License v.2. -** -******************************************************************************* -******************************************************************************/ - -#ifndef __DLMCONSTANTS_DOT_H__ -#define __DLMCONSTANTS_DOT_H__ - -/* - * Constants used by DLM interface. - */ - -#define DLM_LOCKSPACE_LEN 64 -#define DLM_RESNAME_MAXLEN 64 - - -/* - * Lock Modes - */ - -#define DLM_LOCK_IV (-1) /* invalid */ -#define DLM_LOCK_NL 0 /* null */ -#define DLM_LOCK_CR 1 /* concurrent read */ -#define DLM_LOCK_CW 2 /* concurrent write */ -#define DLM_LOCK_PR 3 /* protected read */ -#define DLM_LOCK_PW 4 /* protected write */ -#define DLM_LOCK_EX 5 /* exclusive */ - - -/* - * Flags to dlm_lock - * - * DLM_LKF_NOQUEUE - * - * Do not queue the lock request on the wait queue if it cannot be granted - * immediately. If the lock cannot be granted because of this flag, DLM will - * either return -EAGAIN from the dlm_lock call or will return 0 from - * dlm_lock and -EAGAIN in the lock status block when the AST is executed. - * - * DLM_LKF_CANCEL - * - * Used to cancel a pending lock request or conversion. A converting lock is - * returned to its previously granted mode. - * - * DLM_LKF_CONVERT - * - * Indicates a lock conversion request. For conversions the name and namelen - * are ignored and the lock ID in the LKSB is used to identify the lock. - * - * DLM_LKF_VALBLK - * - * Requests DLM to return the current contents of the lock value block in the - * lock status block. When this flag is set in a lock conversion from PW or EX - * modes, DLM assigns the value specified in the lock status block to the lock - * value block of the lock resource. The LVB is a DLM_LVB_LEN size array - * containing application-specific information. - * - * DLM_LKF_QUECVT - * - * Force a conversion request to be queued, even if it is compatible with - * the granted modes of other locks on the same resource. - * - * DLM_LKF_IVVALBLK - * - * Invalidate the lock value block. - * - * DLM_LKF_CONVDEADLK - * - * Allows the dlm to resolve conversion deadlocks internally by demoting the - * granted mode of a converting lock to NL. The DLM_SBF_DEMOTED flag is - * returned for a conversion that's been effected by this. - * - * DLM_LKF_PERSISTENT - * - * Only relevant to locks originating in userspace. A persistent lock will not - * be removed if the process holding the lock exits. - * - * DLM_LKF_NODLCKWT - * - * Do not cancel the lock if it gets into conversion deadlock. - * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN. - * - * DLM_LKF_NODLCKBLK - * - * net yet implemented - * - * DLM_LKF_EXPEDITE - * - * Used only with new requests for NL mode locks. Tells the lock manager - * to grant the lock, ignoring other locks in convert and wait queues. - * - * DLM_LKF_NOQUEUEBAST - * - * Send blocking AST's before returning -EAGAIN to the caller. It is only - * used along with the NOQUEUE flag. Blocking AST's are not sent for failed - * NOQUEUE requests otherwise. - * - * DLM_LKF_HEADQUE - * - * Add a lock to the head of the convert or wait queue rather than the tail. - * - * DLM_LKF_NOORDER - * - * Disregard the standard grant order rules and grant a lock as soon as it - * is compatible with other granted locks. - * - * DLM_LKF_ORPHAN - * - * not yet implemented - * - * DLM_LKF_ALTPR - * - * If the requested mode cannot be granted immediately, try to grant the lock - * in PR mode instead. If this alternate mode is granted instead of the - * requested mode, DLM_SBF_ALTMODE is returned in the lksb. - * - * DLM_LKF_ALTCW - * - * The same as ALTPR, but the alternate mode is CW. - * - * DLM_LKF_FORCEUNLOCK - * - * Unlock the lock even if it is converting or waiting or has sublocks. - * Only really for use by the userland device.c code. - * - */ - -#define DLM_LKF_NOQUEUE 0x00000001 -#define DLM_LKF_CANCEL 0x00000002 -#define DLM_LKF_CONVERT 0x00000004 -#define DLM_LKF_VALBLK 0x00000008 -#define DLM_LKF_QUECVT 0x00000010 -#define DLM_LKF_IVVALBLK 0x00000020 -#define DLM_LKF_CONVDEADLK 0x00000040 -#define DLM_LKF_PERSISTENT 0x00000080 -#define DLM_LKF_NODLCKWT 0x00000100 -#define DLM_LKF_NODLCKBLK 0x00000200 -#define DLM_LKF_EXPEDITE 0x00000400 -#define DLM_LKF_NOQUEUEBAST 0x00000800 -#define DLM_LKF_HEADQUE 0x00001000 -#define DLM_LKF_NOORDER 0x00002000 -#define DLM_LKF_ORPHAN 0x00004000 -#define DLM_LKF_ALTPR 0x00008000 -#define DLM_LKF_ALTCW 0x00010000 -#define DLM_LKF_FORCEUNLOCK 0x00020000 -#define DLM_LKF_TIMEOUT 0x00040000 - -/* - * Some return codes that are not in errno.h - */ - -#define DLM_ECANCEL 0x10001 -#define DLM_EUNLOCK 0x10002 - -#endif /* __DLMCONSTANTS_DOT_H__ */ diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h deleted file mode 100644 index 91e3a360f611..000000000000 --- a/include/linux/dm-ioctl.h +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited. - * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved. - * - * This file is released under the LGPL. - */ - -#ifndef _LINUX_DM_IOCTL_V4_H -#define _LINUX_DM_IOCTL_V4_H - -#include - -#define DM_DIR "mapper" /* Slashes not supported */ -#define DM_CONTROL_NODE "control" -#define DM_MAX_TYPE_NAME 16 -#define DM_NAME_LEN 128 -#define DM_UUID_LEN 129 - -/* - * A traditional ioctl interface for the device mapper. - * - * Each device can have two tables associated with it, an - * 'active' table which is the one currently used by io passing - * through the device, and an 'inactive' one which is a table - * that is being prepared as a replacement for the 'active' one. - * - * DM_VERSION: - * Just get the version information for the ioctl interface. - * - * DM_REMOVE_ALL: - * Remove all dm devices, destroy all tables. Only really used - * for debug. - * - * DM_LIST_DEVICES: - * Get a list of all the dm device names. - * - * DM_DEV_CREATE: - * Create a new device, neither the 'active' or 'inactive' table - * slots will be filled. The device will be in suspended state - * after creation, however any io to the device will get errored - * since it will be out-of-bounds. - * - * DM_DEV_REMOVE: - * Remove a device, destroy any tables. - * - * DM_DEV_RENAME: - * Rename a device or set its uuid if none was previously supplied. - * - * DM_SUSPEND: - * This performs both suspend and resume, depending which flag is - * passed in. - * Suspend: This command will not return until all pending io to - * the device has completed. Further io will be deferred until - * the device is resumed. - * Resume: It is no longer an error to issue this command on an - * unsuspended device. If a table is present in the 'inactive' - * slot, it will be moved to the active slot, then the old table - * from the active slot will be _destroyed_. Finally the device - * is resumed. - * - * DM_DEV_STATUS: - * Retrieves the status for the table in the 'active' slot. - * - * DM_DEV_WAIT: - * Wait for a significant event to occur to the device. This - * could either be caused by an event triggered by one of the - * targets of the table in the 'active' slot, or a table change. - * - * DM_TABLE_LOAD: - * Load a table into the 'inactive' slot for the device. The - * device does _not_ need to be suspended prior to this command. - * - * DM_TABLE_CLEAR: - * Destroy any table in the 'inactive' slot (ie. abort). - * - * DM_TABLE_DEPS: - * Return a set of device dependencies for the 'active' table. - * - * DM_TABLE_STATUS: - * Return the targets status for the 'active' table. - * - * DM_TARGET_MSG: - * Pass a message string to the target at a specific offset of a device. - * - * DM_DEV_SET_GEOMETRY: - * Set the geometry of a device by passing in a string in this format: - * - * "cylinders heads sectors_per_track start_sector" - * - * Beware that CHS geometry is nearly obsolete and only provided - * for compatibility with dm devices that can be booted by a PC - * BIOS. See struct hd_geometry for range limits. Also note that - * the geometry is erased if the device size changes. - */ - -/* - * All ioctl arguments consist of a single chunk of memory, with - * this structure at the start. If a uuid is specified any - * lookup (eg. for a DM_INFO) will be done on that, *not* the - * name. - */ -struct dm_ioctl { - /* - * The version number is made up of three parts: - * major - no backward or forward compatibility, - * minor - only backwards compatible, - * patch - both backwards and forwards compatible. - * - * All clients of the ioctl interface should fill in the - * version number of the interface that they were - * compiled with. - * - * All recognised ioctl commands (ie. those that don't - * return -ENOTTY) fill out this field, even if the - * command failed. - */ - __u32 version[3]; /* in/out */ - __u32 data_size; /* total size of data passed in - * including this struct */ - - __u32 data_start; /* offset to start of data - * relative to start of this struct */ - - __u32 target_count; /* in/out */ - __s32 open_count; /* out */ - __u32 flags; /* in/out */ - - /* - * event_nr holds either the event number (input and output) or the - * udev cookie value (input only). - * The DM_DEV_WAIT ioctl takes an event number as input. - * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls - * use the field as a cookie to return in the DM_COOKIE - * variable with the uevents they issue. - * For output, the ioctls return the event number, not the cookie. - */ - __u32 event_nr; /* in/out */ - __u32 padding; - - __u64 dev; /* in/out */ - - char name[DM_NAME_LEN]; /* device name */ - char uuid[DM_UUID_LEN]; /* unique identifier for - * the block device */ - char data[7]; /* padding or data */ -}; - -/* - * Used to specify tables. These structures appear after the - * dm_ioctl. - */ -struct dm_target_spec { - __u64 sector_start; - __u64 length; - __s32 status; /* used when reading from kernel only */ - - /* - * Location of the next dm_target_spec. - * - When specifying targets on a DM_TABLE_LOAD command, this value is - * the number of bytes from the start of the "current" dm_target_spec - * to the start of the "next" dm_target_spec. - * - When retrieving targets on a DM_TABLE_STATUS command, this value - * is the number of bytes from the start of the first dm_target_spec - * (that follows the dm_ioctl struct) to the start of the "next" - * dm_target_spec. - */ - __u32 next; - - char target_type[DM_MAX_TYPE_NAME]; - - /* - * Parameter string starts immediately after this object. - * Be careful to add padding after string to ensure correct - * alignment of subsequent dm_target_spec. - */ -}; - -/* - * Used to retrieve the target dependencies. - */ -struct dm_target_deps { - __u32 count; /* Array size */ - __u32 padding; /* unused */ - __u64 dev[0]; /* out */ -}; - -/* - * Used to get a list of all dm devices. - */ -struct dm_name_list { - __u64 dev; - __u32 next; /* offset to the next record from - the _start_ of this */ - char name[0]; -}; - -/* - * Used to retrieve the target versions - */ -struct dm_target_versions { - __u32 next; - __u32 version[3]; - - char name[0]; -}; - -/* - * Used to pass message to a target - */ -struct dm_target_msg { - __u64 sector; /* Device sector */ - - char message[0]; -}; - -/* - * If you change this make sure you make the corresponding change - * to dm-ioctl.c:lookup_ioctl() - */ -enum { - /* Top level cmds */ - DM_VERSION_CMD = 0, - DM_REMOVE_ALL_CMD, - DM_LIST_DEVICES_CMD, - - /* device level cmds */ - DM_DEV_CREATE_CMD, - DM_DEV_REMOVE_CMD, - DM_DEV_RENAME_CMD, - DM_DEV_SUSPEND_CMD, - DM_DEV_STATUS_CMD, - DM_DEV_WAIT_CMD, - - /* Table level cmds */ - DM_TABLE_LOAD_CMD, - DM_TABLE_CLEAR_CMD, - DM_TABLE_DEPS_CMD, - DM_TABLE_STATUS_CMD, - - /* Added later */ - DM_LIST_VERSIONS_CMD, - DM_TARGET_MSG_CMD, - DM_DEV_SET_GEOMETRY_CMD -}; - -#define DM_IOCTL 0xfd - -#define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl) -#define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl) -#define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl) - -#define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl) -#define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl) -#define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl) -#define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl) -#define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl) -#define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl) - -#define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl) -#define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl) -#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl) -#define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl) - -#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl) - -#define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl) -#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) - -#define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 23 -#define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2012-07-25)" - -/* Status bits */ -#define DM_READONLY_FLAG (1 << 0) /* In/Out */ -#define DM_SUSPEND_FLAG (1 << 1) /* In/Out */ -#define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */ - -/* - * Flag passed into ioctl STATUS command to get table information - * rather than current status. - */ -#define DM_STATUS_TABLE_FLAG (1 << 4) /* In */ - -/* - * Flags that indicate whether a table is present in either of - * the two table slots that a device has. - */ -#define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */ -#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */ - -/* - * Indicates that the buffer passed in wasn't big enough for the - * results. - */ -#define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */ - -/* - * This flag is now ignored. - */ -#define DM_SKIP_BDGET_FLAG (1 << 9) /* In */ - -/* - * Set this to avoid attempting to freeze any filesystem when suspending. - */ -#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */ - -/* - * Set this to suspend without flushing queued ios. - * Also disables flushing uncommitted changes in the thin target before - * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT. - */ -#define DM_NOFLUSH_FLAG (1 << 11) /* In */ - -/* - * If set, any table information returned will relate to the inactive - * table instead of the live one. Always check DM_INACTIVE_PRESENT_FLAG - * is set before using the data returned. - */ -#define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */ - -/* - * If set, a uevent was generated for which the caller may need to wait. - */ -#define DM_UEVENT_GENERATED_FLAG (1 << 13) /* Out */ - -/* - * If set, rename changes the uuid not the name. Only permitted - * if no uuid was previously supplied: an existing uuid cannot be changed. - */ -#define DM_UUID_FLAG (1 << 14) /* In */ - -/* - * If set, all buffers are wiped after use. Use when sending - * or requesting sensitive data such as an encryption key. - */ -#define DM_SECURE_DATA_FLAG (1 << 15) /* In */ - -#endif /* _LINUX_DM_IOCTL_H */ diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h deleted file mode 100644 index 0678c2adc421..000000000000 --- a/include/linux/dm-log-userspace.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * Copyright (C) 2006-2009 Red Hat, Inc. - * - * This file is released under the LGPL. - */ - -#ifndef __DM_LOG_USERSPACE_H__ -#define __DM_LOG_USERSPACE_H__ - -#include /* For DM_UUID_LEN */ - -/* - * The device-mapper userspace log module consists of a kernel component and - * a user-space component. The kernel component implements the API defined - * in dm-dirty-log.h. Its purpose is simply to pass the parameters and - * return values of those API functions between kernel and user-space. - * - * Below are defined the 'request_types' - DM_ULOG_CTR, DM_ULOG_DTR, etc. - * These request types represent the different functions in the device-mapper - * dirty log API. Each of these is described in more detail below. - * - * The user-space program must listen for requests from the kernel (representing - * the various API functions) and process them. - * - * User-space begins by setting up the communication link (error checking - * removed for clarity): - * fd = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR); - * addr.nl_family = AF_NETLINK; - * addr.nl_groups = CN_IDX_DM; - * addr.nl_pid = 0; - * r = bind(fd, (struct sockaddr *) &addr, sizeof(addr)); - * opt = addr.nl_groups; - * setsockopt(fd, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &opt, sizeof(opt)); - * - * User-space will then wait to receive requests form the kernel, which it - * will process as described below. The requests are received in the form, - * ((struct dm_ulog_request) + (additional data)). Depending on the request - * type, there may or may not be 'additional data'. In the descriptions below, - * you will see 'Payload-to-userspace' and 'Payload-to-kernel'. The - * 'Payload-to-userspace' is what the kernel sends in 'additional data' as - * necessary parameters to complete the request. The 'Payload-to-kernel' is - * the 'additional data' returned to the kernel that contains the necessary - * results of the request. The 'data_size' field in the dm_ulog_request - * structure denotes the availability and amount of payload data. - */ - -/* - * DM_ULOG_CTR corresponds to (found in dm-dirty-log.h): - * int (*ctr)(struct dm_dirty_log *log, struct dm_target *ti, - * unsigned argc, char **argv); - * - * Payload-to-userspace: - * A single string containing all the argv arguments separated by ' 's - * Payload-to-kernel: - * A NUL-terminated string that is the name of the device that is used - * as the backing store for the log data. 'dm_get_device' will be called - * on this device. ('dm_put_device' will be called on this device - * automatically after calling DM_ULOG_DTR.) If there is no device needed - * for log data, 'data_size' in the dm_ulog_request struct should be 0. - * - * The UUID contained in the dm_ulog_request structure is the reference that - * will be used by all request types to a specific log. The constructor must - * record this association with the instance created. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field, filling the - * data field with the log device if necessary, and setting 'data_size' - * appropriately. - */ -#define DM_ULOG_CTR 1 - -/* - * DM_ULOG_DTR corresponds to (found in dm-dirty-log.h): - * void (*dtr)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * A single string containing all the argv arguments separated by ' 's - * Payload-to-kernel: - * None. ('data_size' in the dm_ulog_request struct should be 0.) - * - * The UUID contained in the dm_ulog_request structure is all that is - * necessary to identify the log instance being destroyed. There is no - * payload data. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and clearing - * 'data_size' appropriately. - */ -#define DM_ULOG_DTR 2 - -/* - * DM_ULOG_PRESUSPEND corresponds to (found in dm-dirty-log.h): - * int (*presuspend)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * None. - * - * The UUID contained in the dm_ulog_request structure is all that is - * necessary to identify the log instance being presuspended. There is no - * payload data. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_PRESUSPEND 3 - -/* - * DM_ULOG_POSTSUSPEND corresponds to (found in dm-dirty-log.h): - * int (*postsuspend)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * None. - * - * The UUID contained in the dm_ulog_request structure is all that is - * necessary to identify the log instance being postsuspended. There is no - * payload data. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_POSTSUSPEND 4 - -/* - * DM_ULOG_RESUME corresponds to (found in dm-dirty-log.h): - * int (*resume)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * None. - * - * The UUID contained in the dm_ulog_request structure is all that is - * necessary to identify the log instance being resumed. There is no - * payload data. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_RESUME 5 - -/* - * DM_ULOG_GET_REGION_SIZE corresponds to (found in dm-dirty-log.h): - * uint32_t (*get_region_size)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * uint64_t - contains the region size - * - * The region size is something that was determined at constructor time. - * It is returned in the payload area and 'data_size' is set to - * reflect this. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field appropriately. - */ -#define DM_ULOG_GET_REGION_SIZE 6 - -/* - * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h): - * int (*is_clean)(struct dm_dirty_log *log, region_t region); - * - * Payload-to-userspace: - * uint64_t - the region to get clean status on - * Payload-to-kernel: - * int64_t - 1 if clean, 0 otherwise - * - * Payload is sizeof(uint64_t) and contains the region for which the clean - * status is being made. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - filling the payload with 0 (not clean) or - * 1 (clean), setting 'data_size' and 'error' appropriately. - */ -#define DM_ULOG_IS_CLEAN 7 - -/* - * DM_ULOG_IN_SYNC corresponds to (found in dm-dirty-log.h): - * int (*in_sync)(struct dm_dirty_log *log, region_t region, - * int can_block); - * - * Payload-to-userspace: - * uint64_t - the region to get sync status on - * Payload-to-kernel: - * int64_t - 1 if in-sync, 0 otherwise - * - * Exactly the same as 'is_clean' above, except this time asking "has the - * region been recovered?" vs. "is the region not being modified?" - */ -#define DM_ULOG_IN_SYNC 8 - -/* - * DM_ULOG_FLUSH corresponds to (found in dm-dirty-log.h): - * int (*flush)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * None. - * - * No incoming or outgoing payload. Simply flush log state to disk. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and clearing - * 'data_size' appropriately. - */ -#define DM_ULOG_FLUSH 9 - -/* - * DM_ULOG_MARK_REGION corresponds to (found in dm-dirty-log.h): - * void (*mark_region)(struct dm_dirty_log *log, region_t region); - * - * Payload-to-userspace: - * uint64_t [] - region(s) to mark - * Payload-to-kernel: - * None. - * - * Incoming payload contains the one or more regions to mark dirty. - * The number of regions contained in the payload can be determined from - * 'data_size/sizeof(uint64_t)'. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and clearing - * 'data_size' appropriately. - */ -#define DM_ULOG_MARK_REGION 10 - -/* - * DM_ULOG_CLEAR_REGION corresponds to (found in dm-dirty-log.h): - * void (*clear_region)(struct dm_dirty_log *log, region_t region); - * - * Payload-to-userspace: - * uint64_t [] - region(s) to clear - * Payload-to-kernel: - * None. - * - * Incoming payload contains the one or more regions to mark clean. - * The number of regions contained in the payload can be determined from - * 'data_size/sizeof(uint64_t)'. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and clearing - * 'data_size' appropriately. - */ -#define DM_ULOG_CLEAR_REGION 11 - -/* - * DM_ULOG_GET_RESYNC_WORK corresponds to (found in dm-dirty-log.h): - * int (*get_resync_work)(struct dm_dirty_log *log, region_t *region); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * { - * int64_t i; -- 1 if recovery necessary, 0 otherwise - * uint64_t r; -- The region to recover if i=1 - * } - * 'data_size' should be set appropriately. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field appropriately. - */ -#define DM_ULOG_GET_RESYNC_WORK 12 - -/* - * DM_ULOG_SET_REGION_SYNC corresponds to (found in dm-dirty-log.h): - * void (*set_region_sync)(struct dm_dirty_log *log, - * region_t region, int in_sync); - * - * Payload-to-userspace: - * { - * uint64_t - region to set sync state on - * int64_t - 0 if not-in-sync, 1 if in-sync - * } - * Payload-to-kernel: - * None. - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and clearing - * 'data_size' appropriately. - */ -#define DM_ULOG_SET_REGION_SYNC 13 - -/* - * DM_ULOG_GET_SYNC_COUNT corresponds to (found in dm-dirty-log.h): - * region_t (*get_sync_count)(struct dm_dirty_log *log); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * uint64_t - the number of in-sync regions - * - * No incoming payload. Kernel-bound payload contains the number of - * regions that are in-sync (in a size_t). - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_GET_SYNC_COUNT 14 - -/* - * DM_ULOG_STATUS_INFO corresponds to (found in dm-dirty-log.h): - * int (*status)(struct dm_dirty_log *log, STATUSTYPE_INFO, - * char *result, unsigned maxlen); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * Character string containing STATUSTYPE_INFO - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_STATUS_INFO 15 - -/* - * DM_ULOG_STATUS_TABLE corresponds to (found in dm-dirty-log.h): - * int (*status)(struct dm_dirty_log *log, STATUSTYPE_TABLE, - * char *result, unsigned maxlen); - * - * Payload-to-userspace: - * None. - * Payload-to-kernel: - * Character string containing STATUSTYPE_TABLE - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_STATUS_TABLE 16 - -/* - * DM_ULOG_IS_REMOTE_RECOVERING corresponds to (found in dm-dirty-log.h): - * int (*is_remote_recovering)(struct dm_dirty_log *log, region_t region); - * - * Payload-to-userspace: - * uint64_t - region to determine recovery status on - * Payload-to-kernel: - * { - * int64_t is_recovering; -- 0 if no, 1 if yes - * uint64_t in_sync_hint; -- lowest region still needing resync - * } - * - * When the request has been processed, user-space must return the - * dm_ulog_request to the kernel - setting the 'error' field and - * 'data_size' appropriately. - */ -#define DM_ULOG_IS_REMOTE_RECOVERING 17 - -/* - * (DM_ULOG_REQUEST_MASK & request_type) to get the request type - * - * Payload-to-userspace: - * A single string containing all the argv arguments separated by ' 's - * Payload-to-kernel: - * None. ('data_size' in the dm_ulog_request struct should be 0.) - * - * We are reserving 8 bits of the 32-bit 'request_type' field for the - * various request types above. The remaining 24-bits are currently - * set to zero and are reserved for future use and compatibility concerns. - * - * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the - * request type from the 'request_type' field to maintain forward compatibility. - */ -#define DM_ULOG_REQUEST_MASK 0xFF -#define DM_ULOG_REQUEST_TYPE(request_type) \ - (DM_ULOG_REQUEST_MASK & (request_type)) - -/* - * DM_ULOG_REQUEST_VERSION is incremented when there is a - * change to the way information is passed between kernel - * and userspace. This could be a structure change of - * dm_ulog_request or a change in the way requests are - * issued/handled. Changes are outlined here: - * version 1: Initial implementation - * version 2: DM_ULOG_CTR allowed to return a string containing a - * device name that is to be registered with DM via - * 'dm_get_device'. - */ -#define DM_ULOG_REQUEST_VERSION 2 - -struct dm_ulog_request { - /* - * The local unique identifier (luid) and the universally unique - * identifier (uuid) are used to tie a request to a specific - * mirror log. A single machine log could probably make due with - * just the 'luid', but a cluster-aware log must use the 'uuid' and - * the 'luid'. The uuid is what is required for node to node - * communication concerning a particular log, but the 'luid' helps - * differentiate between logs that are being swapped and have the - * same 'uuid'. (Think "live" and "inactive" device-mapper tables.) - */ - uint64_t luid; - char uuid[DM_UUID_LEN]; - char padding[3]; /* Padding because DM_UUID_LEN = 129 */ - - uint32_t version; /* See DM_ULOG_REQUEST_VERSION */ - int32_t error; /* Used to report back processing errors */ - - uint32_t seq; /* Sequence number for request */ - uint32_t request_type; /* DM_ULOG_* defined above */ - uint32_t data_size; /* How much data (not including this struct) */ - - char data[0]; -}; - -#endif /* __DM_LOG_USERSPACE_H__ */ diff --git a/include/linux/dn.h b/include/linux/dn.h deleted file mode 100644 index 9c50445462d9..000000000000 --- a/include/linux/dn.h +++ /dev/null @@ -1,146 +0,0 @@ -#ifndef _LINUX_DN_H -#define _LINUX_DN_H - -#include - -/* - - DECnet Data Structures and Constants - -*/ - -/* - * DNPROTO_NSP can't be the same as SOL_SOCKET, - * so increment each by one (compared to ULTRIX) - */ -#define DNPROTO_NSP 2 /* NSP protocol number */ -#define DNPROTO_ROU 3 /* Routing protocol number */ -#define DNPROTO_NML 4 /* Net mgt protocol number */ -#define DNPROTO_EVL 5 /* Evl protocol number (usr) */ -#define DNPROTO_EVR 6 /* Evl protocol number (evl) */ -#define DNPROTO_NSPT 7 /* NSP trace protocol number */ - - -#define DN_ADDL 2 -#define DN_MAXADDL 2 /* ULTRIX headers have 20 here, but pathworks has 2 */ -#define DN_MAXOPTL 16 -#define DN_MAXOBJL 16 -#define DN_MAXACCL 40 -#define DN_MAXALIASL 128 -#define DN_MAXNODEL 256 -#define DNBUFSIZE 65023 - -/* - * SET/GET Socket options - must match the DSO_ numbers below - */ -#define SO_CONDATA 1 -#define SO_CONACCESS 2 -#define SO_PROXYUSR 3 -#define SO_LINKINFO 7 - -#define DSO_CONDATA 1 /* Set/Get connect data */ -#define DSO_DISDATA 10 /* Set/Get disconnect data */ -#define DSO_CONACCESS 2 /* Set/Get connect access data */ -#define DSO_ACCEPTMODE 4 /* Set/Get accept mode */ -#define DSO_CONACCEPT 5 /* Accept deferred connection */ -#define DSO_CONREJECT 6 /* Reject deferred connection */ -#define DSO_LINKINFO 7 /* Set/Get link information */ -#define DSO_STREAM 8 /* Set socket type to stream */ -#define DSO_SEQPACKET 9 /* Set socket type to sequenced packet */ -#define DSO_MAXWINDOW 11 /* Maximum window size allowed */ -#define DSO_NODELAY 12 /* Turn off nagle */ -#define DSO_CORK 13 /* Wait for more data! */ -#define DSO_SERVICES 14 /* NSP Services field */ -#define DSO_INFO 15 /* NSP Info field */ -#define DSO_MAX 15 /* Maximum option number */ - - -/* LINK States */ -#define LL_INACTIVE 0 -#define LL_CONNECTING 1 -#define LL_RUNNING 2 -#define LL_DISCONNECTING 3 - -#define ACC_IMMED 0 -#define ACC_DEFER 1 - -#define SDF_WILD 1 /* Wild card object */ -#define SDF_PROXY 2 /* Addr eligible for proxy */ -#define SDF_UICPROXY 4 /* Use uic-based proxy */ - -/* Structures */ - - -struct dn_naddr { - __le16 a_len; - __u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */ -}; - -struct sockaddr_dn { - __u16 sdn_family; - __u8 sdn_flags; - __u8 sdn_objnum; - __le16 sdn_objnamel; - __u8 sdn_objname[DN_MAXOBJL]; - struct dn_naddr sdn_add; -}; -#define sdn_nodeaddrl sdn_add.a_len /* Node address length */ -#define sdn_nodeaddr sdn_add.a_addr /* Node address */ - - - -/* - * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure - */ -struct optdata_dn { - __le16 opt_status; /* Extended status return */ -#define opt_sts opt_status - __le16 opt_optl; /* Length of user data */ - __u8 opt_data[16]; /* User data */ -}; - -struct accessdata_dn { - __u8 acc_accl; - __u8 acc_acc[DN_MAXACCL]; - __u8 acc_passl; - __u8 acc_pass[DN_MAXACCL]; - __u8 acc_userl; - __u8 acc_user[DN_MAXACCL]; -}; - -/* - * DECnet logical link information structure - */ -struct linkinfo_dn { - __u16 idn_segsize; /* Segment size for link */ - __u8 idn_linkstate; /* Logical link state */ -}; - -/* - * Ethernet address format (for DECnet) - */ -union etheraddress { - __u8 dne_addr[6]; /* Full ethernet address */ - struct { - __u8 dne_hiord[4]; /* DECnet HIORD prefix */ - __u8 dne_nodeaddr[2]; /* DECnet node address */ - } dne_remote; -}; - - -/* - * DECnet physical socket address format - */ -struct dn_addr { - __le16 dna_family; /* AF_DECnet */ - union etheraddress dna_netaddr; /* DECnet ethernet address */ -}; - -#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */ - -#define SIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr) -#define SIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr) -#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int) -#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int) - -#endif /* _LINUX_DN_H */ diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h deleted file mode 100644 index 86552807aed9..000000000000 --- a/include/linux/dqblk_xfs.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright (c) 1995-2001,2004 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesset General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#ifndef _LINUX_DQBLK_XFS_H -#define _LINUX_DQBLK_XFS_H - -#include - -/* - * Disk quota - quotactl(2) commands for the XFS Quota Manager (XQM). - */ - -#define XQM_CMD(x) (('X'<<8)+(x)) /* note: forms first QCMD argument */ -#define XQM_COMMAND(x) (((x) & (0xff<<8)) == ('X'<<8)) /* test if for XFS */ - -#define XQM_USRQUOTA 0 /* system call user quota type */ -#define XQM_GRPQUOTA 1 /* system call group quota type */ -#define XQM_PRJQUOTA 2 /* system call project quota type */ -#define XQM_MAXQUOTAS 3 - -#define Q_XQUOTAON XQM_CMD(1) /* enable accounting/enforcement */ -#define Q_XQUOTAOFF XQM_CMD(2) /* disable accounting/enforcement */ -#define Q_XGETQUOTA XQM_CMD(3) /* get disk limits and usage */ -#define Q_XSETQLIM XQM_CMD(4) /* set disk limits */ -#define Q_XGETQSTAT XQM_CMD(5) /* get quota subsystem status */ -#define Q_XQUOTARM XQM_CMD(6) /* free disk space used by dquots */ -#define Q_XQUOTASYNC XQM_CMD(7) /* delalloc flush, updates dquots */ - -/* - * fs_disk_quota structure: - * - * This contains the current quota information regarding a user/proj/group. - * It is 64-bit aligned, and all the blk units are in BBs (Basic Blocks) of - * 512 bytes. - */ -#define FS_DQUOT_VERSION 1 /* fs_disk_quota.d_version */ -typedef struct fs_disk_quota { - __s8 d_version; /* version of this structure */ - __s8 d_flags; /* FS_{USER,PROJ,GROUP}_QUOTA */ - __u16 d_fieldmask; /* field specifier */ - __u32 d_id; /* user, project, or group ID */ - __u64 d_blk_hardlimit;/* absolute limit on disk blks */ - __u64 d_blk_softlimit;/* preferred limit on disk blks */ - __u64 d_ino_hardlimit;/* maximum # allocated inodes */ - __u64 d_ino_softlimit;/* preferred inode limit */ - __u64 d_bcount; /* # disk blocks owned by the user */ - __u64 d_icount; /* # inodes owned by the user */ - __s32 d_itimer; /* zero if within inode limits */ - /* if not, we refuse service */ - __s32 d_btimer; /* similar to above; for disk blocks */ - __u16 d_iwarns; /* # warnings issued wrt num inodes */ - __u16 d_bwarns; /* # warnings issued wrt disk blocks */ - __s32 d_padding2; /* padding2 - for future use */ - __u64 d_rtb_hardlimit;/* absolute limit on realtime blks */ - __u64 d_rtb_softlimit;/* preferred limit on RT disk blks */ - __u64 d_rtbcount; /* # realtime blocks owned */ - __s32 d_rtbtimer; /* similar to above; for RT disk blks */ - __u16 d_rtbwarns; /* # warnings issued wrt RT disk blks */ - __s16 d_padding3; /* padding3 - for future use */ - char d_padding4[8]; /* yet more padding */ -} fs_disk_quota_t; - -/* - * These fields are sent to Q_XSETQLIM to specify fields that need to change. - */ -#define FS_DQ_ISOFT (1<<0) -#define FS_DQ_IHARD (1<<1) -#define FS_DQ_BSOFT (1<<2) -#define FS_DQ_BHARD (1<<3) -#define FS_DQ_RTBSOFT (1<<4) -#define FS_DQ_RTBHARD (1<<5) -#define FS_DQ_LIMIT_MASK (FS_DQ_ISOFT | FS_DQ_IHARD | FS_DQ_BSOFT | \ - FS_DQ_BHARD | FS_DQ_RTBSOFT | FS_DQ_RTBHARD) -/* - * These timers can only be set in super user's dquot. For others, timers are - * automatically started and stopped. Superusers timer values set the limits - * for the rest. In case these values are zero, the DQ_{F,B}TIMELIMIT values - * defined below are used. - * These values also apply only to the d_fieldmask field for Q_XSETQLIM. - */ -#define FS_DQ_BTIMER (1<<6) -#define FS_DQ_ITIMER (1<<7) -#define FS_DQ_RTBTIMER (1<<8) -#define FS_DQ_TIMER_MASK (FS_DQ_BTIMER | FS_DQ_ITIMER | FS_DQ_RTBTIMER) - -/* - * Warning counts are set in both super user's dquot and others. For others, - * warnings are set/cleared by the administrators (or automatically by going - * below the soft limit). Superusers warning values set the warning limits - * for the rest. In case these values are zero, the DQ_{F,B}WARNLIMIT values - * defined below are used. - * These values also apply only to the d_fieldmask field for Q_XSETQLIM. - */ -#define FS_DQ_BWARNS (1<<9) -#define FS_DQ_IWARNS (1<<10) -#define FS_DQ_RTBWARNS (1<<11) -#define FS_DQ_WARNS_MASK (FS_DQ_BWARNS | FS_DQ_IWARNS | FS_DQ_RTBWARNS) - -/* - * Accounting values. These can only be set for filesystem with - * non-transactional quotas that require quotacheck(8) in userspace. - */ -#define FS_DQ_BCOUNT (1<<12) -#define FS_DQ_ICOUNT (1<<13) -#define FS_DQ_RTBCOUNT (1<<14) -#define FS_DQ_ACCT_MASK (FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT) - -/* - * Various flags related to quotactl(2). - */ -#define FS_QUOTA_UDQ_ACCT (1<<0) /* user quota accounting */ -#define FS_QUOTA_UDQ_ENFD (1<<1) /* user quota limits enforcement */ -#define FS_QUOTA_GDQ_ACCT (1<<2) /* group quota accounting */ -#define FS_QUOTA_GDQ_ENFD (1<<3) /* group quota limits enforcement */ -#define FS_QUOTA_PDQ_ACCT (1<<4) /* project quota accounting */ -#define FS_QUOTA_PDQ_ENFD (1<<5) /* project quota limits enforcement */ - -#define FS_USER_QUOTA (1<<0) /* user quota type */ -#define FS_PROJ_QUOTA (1<<1) /* project quota type */ -#define FS_GROUP_QUOTA (1<<2) /* group quota type */ - -/* - * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system. - * Provides a centralized way to get meta information about the quota subsystem. - * eg. space taken up for user and group quotas, number of dquots currently - * incore. - */ -#define FS_QSTAT_VERSION 1 /* fs_quota_stat.qs_version */ - -/* - * Some basic information about 'quota files'. - */ -typedef struct fs_qfilestat { - __u64 qfs_ino; /* inode number */ - __u64 qfs_nblks; /* number of BBs 512-byte-blks */ - __u32 qfs_nextents; /* number of extents */ -} fs_qfilestat_t; - -typedef struct fs_quota_stat { - __s8 qs_version; /* version number for future changes */ - __u16 qs_flags; /* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */ - __s8 qs_pad; /* unused */ - fs_qfilestat_t qs_uquota; /* user quota storage information */ - fs_qfilestat_t qs_gquota; /* group quota storage information */ - __u32 qs_incoredqs; /* number of dquots incore */ - __s32 qs_btimelimit; /* limit for blks timer */ - __s32 qs_itimelimit; /* limit for inodes timer */ - __s32 qs_rtbtimelimit;/* limit for rt blks timer */ - __u16 qs_bwarnlimit; /* limit for num warnings */ - __u16 qs_iwarnlimit; /* limit for num warnings */ -} fs_quota_stat_t; - -#endif /* _LINUX_DQBLK_XFS_H */ diff --git a/include/linux/edd.h b/include/linux/edd.h index 4cbd0fe9df08..83d4371ec996 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -30,165 +30,9 @@ #ifndef _LINUX_EDD_H #define _LINUX_EDD_H -#include - -#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF - in boot_params - treat this as 1 byte */ -#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ -#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */ -#define EDDEXTSIZE 8 /* change these if you muck with the structures */ -#define EDDPARMSIZE 74 -#define CHECKEXTENSIONSPRESENT 0x41 -#define GETDEVICEPARAMETERS 0x48 -#define LEGACYGETDEVICEPARAMETERS 0x08 -#define EDDMAGIC1 0x55AA -#define EDDMAGIC2 0xAA55 - - -#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */ -#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */ -#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */ -#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */ -#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF - in boot_params - treat this as 1 byte */ +#include #ifndef __ASSEMBLY__ - -#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0) -#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1) -#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2) -#define EDD_EXT_64BIT_EXTENSIONS (1 << 3) - -#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0) -#define EDD_INFO_GEOMETRY_VALID (1 << 1) -#define EDD_INFO_REMOVABLE (1 << 2) -#define EDD_INFO_WRITE_VERIFY (1 << 3) -#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4) -#define EDD_INFO_LOCKABLE (1 << 5) -#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6) -#define EDD_INFO_USE_INT13_FN50 (1 << 7) - -struct edd_device_params { - __u16 length; - __u16 info_flags; - __u32 num_default_cylinders; - __u32 num_default_heads; - __u32 sectors_per_track; - __u64 number_of_sectors; - __u16 bytes_per_sector; - __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */ - __u16 key; /* = 0xBEDD */ - __u8 device_path_info_length; /* = 44 */ - __u8 reserved2; - __u16 reserved3; - __u8 host_bus_type[4]; - __u8 interface_type[8]; - union { - struct { - __u16 base_address; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) isa; - struct { - __u8 bus; - __u8 slot; - __u8 function; - __u8 channel; - __u32 reserved; - } __attribute__ ((packed)) pci; - /* pcix is same as pci */ - struct { - __u64 reserved; - } __attribute__ ((packed)) ibnd; - struct { - __u64 reserved; - } __attribute__ ((packed)) xprs; - struct { - __u64 reserved; - } __attribute__ ((packed)) htpt; - struct { - __u64 reserved; - } __attribute__ ((packed)) unknown; - } interface_path; - union { - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) ata; - struct { - __u8 device; - __u8 lun; - __u8 reserved1; - __u8 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) atapi; - struct { - __u16 id; - __u64 lun; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) scsi; - struct { - __u64 serial_number; - __u64 reserved; - } __attribute__ ((packed)) usb; - struct { - __u64 eui; - __u64 reserved; - } __attribute__ ((packed)) i1394; - struct { - __u64 wwid; - __u64 lun; - } __attribute__ ((packed)) fibre; - struct { - __u64 identity_tag; - __u64 reserved; - } __attribute__ ((packed)) i2o; - struct { - __u32 array_number; - __u32 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) raid; - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) sata; - struct { - __u64 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) unknown; - } device_path; - __u8 reserved4; - __u8 checksum; -} __attribute__ ((packed)); - -struct edd_info { - __u8 device; - __u8 version; - __u16 interface_support; - __u16 legacy_max_cylinder; - __u8 legacy_max_head; - __u8 legacy_sectors_per_track; - struct edd_device_params params; -} __attribute__ ((packed)); - -struct edd { - unsigned int mbr_signature[EDD_MBR_SIG_MAX]; - struct edd_info edd_info[EDDMAXNR]; - unsigned char mbr_signature_nr; - unsigned char edd_info_nr; -}; - -#ifdef __KERNEL__ extern struct edd edd; -#endif /* __KERNEL__ */ #endif /*!__ASSEMBLY__ */ - #endif /* _LINUX_EDD_H */ diff --git a/include/linux/efs_fs_sb.h b/include/linux/efs_fs_sb.h deleted file mode 100644 index a01be90c58cc..000000000000 --- a/include/linux/efs_fs_sb.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * efs_fs_sb.h - * - * Copyright (c) 1999 Al Smith - * - * Portions derived from IRIX header files (c) 1988 Silicon Graphics - */ - -#ifndef __EFS_FS_SB_H__ -#define __EFS_FS_SB_H__ - -#include -#include - -/* EFS superblock magic numbers */ -#define EFS_MAGIC 0x072959 -#define EFS_NEWMAGIC 0x07295a - -#define IS_EFS_MAGIC(x) ((x == EFS_MAGIC) || (x == EFS_NEWMAGIC)) - -#define EFS_SUPER 1 -#define EFS_ROOTINODE 2 - -/* efs superblock on disk */ -struct efs_super { - __be32 fs_size; /* size of filesystem, in sectors */ - __be32 fs_firstcg; /* bb offset to first cg */ - __be32 fs_cgfsize; /* size of cylinder group in bb's */ - __be16 fs_cgisize; /* bb's of inodes per cylinder group */ - __be16 fs_sectors; /* sectors per track */ - __be16 fs_heads; /* heads per cylinder */ - __be16 fs_ncg; /* # of cylinder groups in filesystem */ - __be16 fs_dirty; /* fs needs to be fsck'd */ - __be32 fs_time; /* last super-block update */ - __be32 fs_magic; /* magic number */ - char fs_fname[6]; /* file system name */ - char fs_fpack[6]; /* file system pack name */ - __be32 fs_bmsize; /* size of bitmap in bytes */ - __be32 fs_tfree; /* total free data blocks */ - __be32 fs_tinode; /* total free inodes */ - __be32 fs_bmblock; /* bitmap location. */ - __be32 fs_replsb; /* Location of replicated superblock. */ - __be32 fs_lastialloc; /* last allocated inode */ - char fs_spare[20]; /* space for expansion - MUST BE ZERO */ - __be32 fs_checksum; /* checksum of volume portion of fs */ -}; - -/* efs superblock information in memory */ -struct efs_sb_info { - __u32 fs_magic; /* superblock magic number */ - __u32 fs_start; /* first block of filesystem */ - __u32 first_block; /* first data block in filesystem */ - __u32 total_blocks; /* total number of blocks in filesystem */ - __u32 group_size; /* # of blocks a group consists of */ - __u32 data_free; /* # of free data blocks */ - __u32 inode_free; /* # of free inodes */ - __u16 inode_blocks; /* # of blocks used for inodes in every grp */ - __u16 total_groups; /* # of groups */ -}; - -#endif /* __EFS_FS_SB_H__ */ - diff --git a/include/linux/elf-em.h b/include/linux/elf-em.h deleted file mode 100644 index 8e2b7bac4378..000000000000 --- a/include/linux/elf-em.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef _LINUX_ELF_EM_H -#define _LINUX_ELF_EM_H - -/* These constants define the various ELF target machines */ -#define EM_NONE 0 -#define EM_M32 1 -#define EM_SPARC 2 -#define EM_386 3 -#define EM_68K 4 -#define EM_88K 5 -#define EM_486 6 /* Perhaps disused */ -#define EM_860 7 -#define EM_MIPS 8 /* MIPS R3000 (officially, big-endian only) */ - /* Next two are historical and binaries and - modules of these types will be rejected by - Linux. */ -#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */ -#define EM_MIPS_RS4_BE 10 /* MIPS R4000 big-endian */ - -#define EM_PARISC 15 /* HPPA */ -#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */ -#define EM_PPC 20 /* PowerPC */ -#define EM_PPC64 21 /* PowerPC64 */ -#define EM_SPU 23 /* Cell BE SPU */ -#define EM_SH 42 /* SuperH */ -#define EM_SPARCV9 43 /* SPARC v9 64-bit */ -#define EM_IA_64 50 /* HP/Intel IA-64 */ -#define EM_X86_64 62 /* AMD x86-64 */ -#define EM_S390 22 /* IBM S/390 */ -#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */ -#define EM_V850 87 /* NEC v850 */ -#define EM_M32R 88 /* Renesas M32R */ -#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */ -#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */ -#define EM_BLACKFIN 106 /* ADI Blackfin Processor */ -#define EM_TI_C6000 140 /* TI C6X DSPs */ -#define EM_FRV 0x5441 /* Fujitsu FR-V */ -#define EM_AVR32 0x18ad /* Atmel AVR32 */ - -/* - * This is an interim value that we will use until the committee comes - * up with a final number. - */ -#define EM_ALPHA 0x9026 - -/* Bogus old v850 magic number, used by old tools. */ -#define EM_CYGNUS_V850 0x9080 -/* Bogus old m32r magic number, used by old tools. */ -#define EM_CYGNUS_M32R 0x9041 -/* This is the old interim value for S/390 architecture */ -#define EM_S390_OLD 0xA390 -/* Also Panasonic/MEI MN10300, AM33 */ -#define EM_CYGNUS_MN10300 0xbeef - - -#endif /* _LINUX_ELF_EM_H */ diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h deleted file mode 100644 index 7cd2e80cebc8..000000000000 --- a/include/linux/elf-fdpic.h +++ /dev/null @@ -1,70 +0,0 @@ -/* elf-fdpic.h: FDPIC ELF load map - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _LINUX_ELF_FDPIC_H -#define _LINUX_ELF_FDPIC_H - -#include - -#define PT_GNU_STACK (PT_LOOS + 0x474e551) - -/* segment mappings for ELF FDPIC libraries/executables/interpreters */ -struct elf32_fdpic_loadseg { - Elf32_Addr addr; /* core address to which mapped */ - Elf32_Addr p_vaddr; /* VMA recorded in file */ - Elf32_Word p_memsz; /* allocation size recorded in file */ -}; - -struct elf32_fdpic_loadmap { - Elf32_Half version; /* version of these structures, just in case... */ - Elf32_Half nsegs; /* number of segments */ - struct elf32_fdpic_loadseg segs[]; -}; - -#define ELF32_FDPIC_LOADMAP_VERSION 0x0000 - -/* - * binfmt binary parameters structure - */ -struct elf_fdpic_params { - struct elfhdr hdr; /* ref copy of ELF header */ - struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ - struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ - unsigned long elfhdr_addr; /* mapped ELF header user address */ - unsigned long ph_addr; /* mapped PT_PHDR user address */ - unsigned long map_addr; /* mapped loadmap user address */ - unsigned long entry_addr; /* mapped entry user address */ - unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ - unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ - unsigned long load_addr; /* user address at which to map binary */ - unsigned long flags; -#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ -#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ -#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ -#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant - * displacement */ -#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ -#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ -#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ -#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ -#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ -}; - -#ifdef __KERNEL__ -#ifdef CONFIG_MMU -extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, - struct elf_fdpic_params *interp_params, - unsigned long *start_stack, - unsigned long *start_brk); -#endif -#endif /* __KERNEL__ */ - -#endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/linux/elf.h b/include/linux/elf.h index 59ef40650e1e..8c9048e33463 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -1,420 +1,9 @@ #ifndef _LINUX_ELF_H #define _LINUX_ELF_H -#include -#include -#ifdef __KERNEL__ #include -#endif - -/* 32-bit ELF base types. */ -typedef __u32 Elf32_Addr; -typedef __u16 Elf32_Half; -typedef __u32 Elf32_Off; -typedef __s32 Elf32_Sword; -typedef __u32 Elf32_Word; - -/* 64-bit ELF base types. */ -typedef __u64 Elf64_Addr; -typedef __u16 Elf64_Half; -typedef __s16 Elf64_SHalf; -typedef __u64 Elf64_Off; -typedef __s32 Elf64_Sword; -typedef __u32 Elf64_Word; -typedef __u64 Elf64_Xword; -typedef __s64 Elf64_Sxword; - -/* These constants are for the segment types stored in the image headers */ -#define PT_NULL 0 -#define PT_LOAD 1 -#define PT_DYNAMIC 2 -#define PT_INTERP 3 -#define PT_NOTE 4 -#define PT_SHLIB 5 -#define PT_PHDR 6 -#define PT_TLS 7 /* Thread local storage segment */ -#define PT_LOOS 0x60000000 /* OS-specific */ -#define PT_HIOS 0x6fffffff /* OS-specific */ -#define PT_LOPROC 0x70000000 -#define PT_HIPROC 0x7fffffff -#define PT_GNU_EH_FRAME 0x6474e550 - -#define PT_GNU_STACK (PT_LOOS + 0x474e551) - -/* - * Extended Numbering - * - * If the real number of program header table entries is larger than - * or equal to PN_XNUM(0xffff), it is set to sh_info field of the - * section header at index 0, and PN_XNUM is set to e_phnum - * field. Otherwise, the section header at index 0 is zero - * initialized, if it exists. - * - * Specifications are available in: - * - * - Sun microsystems: Linker and Libraries. - * Part No: 817-1984-17, September 2008. - * URL: http://docs.sun.com/app/docs/doc/817-1984 - * - * - System V ABI AMD64 Architecture Processor Supplement - * Draft Version 0.99., - * May 11, 2009. - * URL: http://www.x86-64.org/ - */ -#define PN_XNUM 0xffff - -/* These constants define the different elf file types */ -#define ET_NONE 0 -#define ET_REL 1 -#define ET_EXEC 2 -#define ET_DYN 3 -#define ET_CORE 4 -#define ET_LOPROC 0xff00 -#define ET_HIPROC 0xffff - -/* This is the info that is needed to parse the dynamic section of the file */ -#define DT_NULL 0 -#define DT_NEEDED 1 -#define DT_PLTRELSZ 2 -#define DT_PLTGOT 3 -#define DT_HASH 4 -#define DT_STRTAB 5 -#define DT_SYMTAB 6 -#define DT_RELA 7 -#define DT_RELASZ 8 -#define DT_RELAENT 9 -#define DT_STRSZ 10 -#define DT_SYMENT 11 -#define DT_INIT 12 -#define DT_FINI 13 -#define DT_SONAME 14 -#define DT_RPATH 15 -#define DT_SYMBOLIC 16 -#define DT_REL 17 -#define DT_RELSZ 18 -#define DT_RELENT 19 -#define DT_PLTREL 20 -#define DT_DEBUG 21 -#define DT_TEXTREL 22 -#define DT_JMPREL 23 -#define DT_ENCODING 32 -#define OLD_DT_LOOS 0x60000000 -#define DT_LOOS 0x6000000d -#define DT_HIOS 0x6ffff000 -#define DT_VALRNGLO 0x6ffffd00 -#define DT_VALRNGHI 0x6ffffdff -#define DT_ADDRRNGLO 0x6ffffe00 -#define DT_ADDRRNGHI 0x6ffffeff -#define DT_VERSYM 0x6ffffff0 -#define DT_RELACOUNT 0x6ffffff9 -#define DT_RELCOUNT 0x6ffffffa -#define DT_FLAGS_1 0x6ffffffb -#define DT_VERDEF 0x6ffffffc -#define DT_VERDEFNUM 0x6ffffffd -#define DT_VERNEED 0x6ffffffe -#define DT_VERNEEDNUM 0x6fffffff -#define OLD_DT_HIOS 0x6fffffff -#define DT_LOPROC 0x70000000 -#define DT_HIPROC 0x7fffffff - -/* This info is needed when parsing the symbol table */ -#define STB_LOCAL 0 -#define STB_GLOBAL 1 -#define STB_WEAK 2 - -#define STT_NOTYPE 0 -#define STT_OBJECT 1 -#define STT_FUNC 2 -#define STT_SECTION 3 -#define STT_FILE 4 -#define STT_COMMON 5 -#define STT_TLS 6 - -#define ELF_ST_BIND(x) ((x) >> 4) -#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) -#define ELF32_ST_BIND(x) ELF_ST_BIND(x) -#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) -#define ELF64_ST_BIND(x) ELF_ST_BIND(x) -#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) - -typedef struct dynamic{ - Elf32_Sword d_tag; - union{ - Elf32_Sword d_val; - Elf32_Addr d_ptr; - } d_un; -} Elf32_Dyn; - -typedef struct { - Elf64_Sxword d_tag; /* entry tag value */ - union { - Elf64_Xword d_val; - Elf64_Addr d_ptr; - } d_un; -} Elf64_Dyn; - -/* The following are used with relocations */ -#define ELF32_R_SYM(x) ((x) >> 8) -#define ELF32_R_TYPE(x) ((x) & 0xff) - -#define ELF64_R_SYM(i) ((i) >> 32) -#define ELF64_R_TYPE(i) ((i) & 0xffffffff) - -typedef struct elf32_rel { - Elf32_Addr r_offset; - Elf32_Word r_info; -} Elf32_Rel; - -typedef struct elf64_rel { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ -} Elf64_Rel; - -typedef struct elf32_rela{ - Elf32_Addr r_offset; - Elf32_Word r_info; - Elf32_Sword r_addend; -} Elf32_Rela; - -typedef struct elf64_rela { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ - Elf64_Sxword r_addend; /* Constant addend used to compute value */ -} Elf64_Rela; - -typedef struct elf32_sym{ - Elf32_Word st_name; - Elf32_Addr st_value; - Elf32_Word st_size; - unsigned char st_info; - unsigned char st_other; - Elf32_Half st_shndx; -} Elf32_Sym; - -typedef struct elf64_sym { - Elf64_Word st_name; /* Symbol name, index in string tbl */ - unsigned char st_info; /* Type and binding attributes */ - unsigned char st_other; /* No defined meaning, 0 */ - Elf64_Half st_shndx; /* Associated section index */ - Elf64_Addr st_value; /* Value of the symbol */ - Elf64_Xword st_size; /* Associated symbol size */ -} Elf64_Sym; - - -#define EI_NIDENT 16 - -typedef struct elf32_hdr{ - unsigned char e_ident[EI_NIDENT]; - Elf32_Half e_type; - Elf32_Half e_machine; - Elf32_Word e_version; - Elf32_Addr e_entry; /* Entry point */ - Elf32_Off e_phoff; - Elf32_Off e_shoff; - Elf32_Word e_flags; - Elf32_Half e_ehsize; - Elf32_Half e_phentsize; - Elf32_Half e_phnum; - Elf32_Half e_shentsize; - Elf32_Half e_shnum; - Elf32_Half e_shstrndx; -} Elf32_Ehdr; - -typedef struct elf64_hdr { - unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */ - Elf64_Half e_type; - Elf64_Half e_machine; - Elf64_Word e_version; - Elf64_Addr e_entry; /* Entry point virtual address */ - Elf64_Off e_phoff; /* Program header table file offset */ - Elf64_Off e_shoff; /* Section header table file offset */ - Elf64_Word e_flags; - Elf64_Half e_ehsize; - Elf64_Half e_phentsize; - Elf64_Half e_phnum; - Elf64_Half e_shentsize; - Elf64_Half e_shnum; - Elf64_Half e_shstrndx; -} Elf64_Ehdr; - -/* These constants define the permissions on sections in the program - header, p_flags. */ -#define PF_R 0x4 -#define PF_W 0x2 -#define PF_X 0x1 - -typedef struct elf32_phdr{ - Elf32_Word p_type; - Elf32_Off p_offset; - Elf32_Addr p_vaddr; - Elf32_Addr p_paddr; - Elf32_Word p_filesz; - Elf32_Word p_memsz; - Elf32_Word p_flags; - Elf32_Word p_align; -} Elf32_Phdr; - -typedef struct elf64_phdr { - Elf64_Word p_type; - Elf64_Word p_flags; - Elf64_Off p_offset; /* Segment file offset */ - Elf64_Addr p_vaddr; /* Segment virtual address */ - Elf64_Addr p_paddr; /* Segment physical address */ - Elf64_Xword p_filesz; /* Segment size in file */ - Elf64_Xword p_memsz; /* Segment size in memory */ - Elf64_Xword p_align; /* Segment alignment, file & memory */ -} Elf64_Phdr; - -/* sh_type */ -#define SHT_NULL 0 -#define SHT_PROGBITS 1 -#define SHT_SYMTAB 2 -#define SHT_STRTAB 3 -#define SHT_RELA 4 -#define SHT_HASH 5 -#define SHT_DYNAMIC 6 -#define SHT_NOTE 7 -#define SHT_NOBITS 8 -#define SHT_REL 9 -#define SHT_SHLIB 10 -#define SHT_DYNSYM 11 -#define SHT_NUM 12 -#define SHT_LOPROC 0x70000000 -#define SHT_HIPROC 0x7fffffff -#define SHT_LOUSER 0x80000000 -#define SHT_HIUSER 0xffffffff - -/* sh_flags */ -#define SHF_WRITE 0x1 -#define SHF_ALLOC 0x2 -#define SHF_EXECINSTR 0x4 -#define SHF_MASKPROC 0xf0000000 - -/* special section indexes */ -#define SHN_UNDEF 0 -#define SHN_LORESERVE 0xff00 -#define SHN_LOPROC 0xff00 -#define SHN_HIPROC 0xff1f -#define SHN_ABS 0xfff1 -#define SHN_COMMON 0xfff2 -#define SHN_HIRESERVE 0xffff - -typedef struct elf32_shdr { - Elf32_Word sh_name; - Elf32_Word sh_type; - Elf32_Word sh_flags; - Elf32_Addr sh_addr; - Elf32_Off sh_offset; - Elf32_Word sh_size; - Elf32_Word sh_link; - Elf32_Word sh_info; - Elf32_Word sh_addralign; - Elf32_Word sh_entsize; -} Elf32_Shdr; - -typedef struct elf64_shdr { - Elf64_Word sh_name; /* Section name, index in string tbl */ - Elf64_Word sh_type; /* Type of section */ - Elf64_Xword sh_flags; /* Miscellaneous section attributes */ - Elf64_Addr sh_addr; /* Section virtual addr at execution */ - Elf64_Off sh_offset; /* Section file offset */ - Elf64_Xword sh_size; /* Size of section in bytes */ - Elf64_Word sh_link; /* Index of another section */ - Elf64_Word sh_info; /* Additional section information */ - Elf64_Xword sh_addralign; /* Section alignment */ - Elf64_Xword sh_entsize; /* Entry size if section holds table */ -} Elf64_Shdr; - -#define EI_MAG0 0 /* e_ident[] indexes */ -#define EI_MAG1 1 -#define EI_MAG2 2 -#define EI_MAG3 3 -#define EI_CLASS 4 -#define EI_DATA 5 -#define EI_VERSION 6 -#define EI_OSABI 7 -#define EI_PAD 8 - -#define ELFMAG0 0x7f /* EI_MAG */ -#define ELFMAG1 'E' -#define ELFMAG2 'L' -#define ELFMAG3 'F' -#define ELFMAG "\177ELF" -#define SELFMAG 4 - -#define ELFCLASSNONE 0 /* EI_CLASS */ -#define ELFCLASS32 1 -#define ELFCLASS64 2 -#define ELFCLASSNUM 3 - -#define ELFDATANONE 0 /* e_ident[EI_DATA] */ -#define ELFDATA2LSB 1 -#define ELFDATA2MSB 2 - -#define EV_NONE 0 /* e_version, EI_VERSION */ -#define EV_CURRENT 1 -#define EV_NUM 2 - -#define ELFOSABI_NONE 0 -#define ELFOSABI_LINUX 3 - -#ifndef ELF_OSABI -#define ELF_OSABI ELFOSABI_NONE -#endif - -/* - * Notes used in ET_CORE. Architectures export some of the arch register sets - * using the corresponding note types via the PTRACE_GETREGSET and - * PTRACE_SETREGSET requests. - */ -#define NT_PRSTATUS 1 -#define NT_PRFPREG 2 -#define NT_PRPSINFO 3 -#define NT_TASKSTRUCT 4 -#define NT_AUXV 6 -/* - * Note to userspace developers: size of NT_SIGINFO note may increase - * in the future to accomodate more fields, don't assume it is fixed! - */ -#define NT_SIGINFO 0x53494749 -#define NT_FILE 0x46494c45 -#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ -#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ -#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ -#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ -#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ -#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ -#define NT_S390_TIMER 0x301 /* s390 timer register */ -#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ -#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */ -#define NT_S390_CTRS 0x304 /* s390 control registers */ -#define NT_S390_PREFIX 0x305 /* s390 prefix register */ -#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ -#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ -#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ -#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ -#define NT_ARM_TLS 0x401 /* ARM TLS register */ -#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ -#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ - - -/* Note header in a PT_NOTE section */ -typedef struct elf32_note { - Elf32_Word n_namesz; /* Name size */ - Elf32_Word n_descsz; /* Content size */ - Elf32_Word n_type; /* Content type */ -} Elf32_Nhdr; - -/* Note header in a PT_NOTE section */ -typedef struct elf64_note { - Elf64_Word n_namesz; /* Name size */ - Elf64_Word n_descsz; /* Content size */ - Elf64_Word n_type; /* Content type */ -} Elf64_Nhdr; +#include -#ifdef __KERNEL__ #ifndef elf_read_implies_exec /* Executables for which elf_read_implies_exec() returns TRUE will have the READ_IMPLIES_EXEC personality flag set automatically. @@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file, extern int elf_coredump_extra_notes_size(void); extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset); #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_H */ diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 0698c79fbcb2..cdd3d13efce7 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -1,109 +1,11 @@ #ifndef _LINUX_ELFCORE_H #define _LINUX_ELFCORE_H -#include -#include -#include -#ifdef __KERNEL__ #include #include -#endif -#include -#include -#include - -struct elf_siginfo -{ - int si_signo; /* signal number */ - int si_code; /* extra code */ - int si_errno; /* errno */ -}; - -#ifdef __KERNEL__ #include -#endif +#include -#ifndef __KERNEL__ -typedef elf_greg_t greg_t; -typedef elf_gregset_t gregset_t; -typedef elf_fpregset_t fpregset_t; -typedef elf_fpxregset_t fpxregset_t; -#define NGREG ELF_NGREG -#endif - -/* - * Definitions to generate Intel SVR4-like core files. - * These mostly have the same names as the SVR4 types with "elf_" - * tacked on the front to prevent clashes with linux definitions, - * and the typedef forms have been avoided. This is mostly like - * the SVR4 structure, but more Linuxy, with things that Linux does - * not support and which gdb doesn't really use excluded. - * Fields present but not used are marked with "XXX". - */ -struct elf_prstatus -{ -#if 0 - long pr_flags; /* XXX Process flags */ - short pr_why; /* XXX Reason for process halt */ - short pr_what; /* XXX More detailed reason */ -#endif - struct elf_siginfo pr_info; /* Info associated with signal */ - short pr_cursig; /* Current signal */ - unsigned long pr_sigpend; /* Set of pending signals */ - unsigned long pr_sighold; /* Set of held signals */ -#if 0 - struct sigaltstack pr_altstack; /* Alternate stack info */ - struct sigaction pr_action; /* Signal action for current sig */ -#endif - pid_t pr_pid; - pid_t pr_ppid; - pid_t pr_pgrp; - pid_t pr_sid; - struct timeval pr_utime; /* User time */ - struct timeval pr_stime; /* System time */ - struct timeval pr_cutime; /* Cumulative user time */ - struct timeval pr_cstime; /* Cumulative system time */ -#if 0 - long pr_instr; /* Current instruction */ -#endif - elf_gregset_t pr_reg; /* GP registers */ -#ifdef CONFIG_BINFMT_ELF_FDPIC - /* When using FDPIC, the loadmap addresses need to be communicated - * to GDB in order for GDB to do the necessary relocations. The - * fields (below) used to communicate this information are placed - * immediately after ``pr_reg'', so that the loadmap addresses may - * be viewed as part of the register set if so desired. - */ - unsigned long pr_exec_fdpic_loadmap; - unsigned long pr_interp_fdpic_loadmap; -#endif - int pr_fpvalid; /* True if math co-processor being used. */ -}; - -#define ELF_PRARGSZ (80) /* Number of chars for args */ - -struct elf_prpsinfo -{ - char pr_state; /* numeric process state */ - char pr_sname; /* char for pr_state */ - char pr_zomb; /* zombie */ - char pr_nice; /* nice val */ - unsigned long pr_flag; /* flags */ - __kernel_uid_t pr_uid; - __kernel_gid_t pr_gid; - pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; - /* Lots missing */ - char pr_fname[16]; /* filename of executable */ - char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ -}; - -#ifndef __KERNEL__ -typedef struct elf_prstatus prstatus_t; -typedef struct elf_prpsinfo prpsinfo_t; -#define PRARGSZ ELF_PRARGSZ -#endif - -#ifdef __KERNEL__ static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs) { #ifdef ELF_CORE_COPY_REGS @@ -167,6 +69,4 @@ extern int elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit); extern size_t elf_core_extra_data_size(void); -#endif /* __KERNEL__ */ - #endif /* _LINUX_ELFCORE_H */ diff --git a/include/linux/errno.h b/include/linux/errno.h index e0de516374da..f6bf082d4d4f 100644 --- a/include/linux/errno.h +++ b/include/linux/errno.h @@ -1,9 +1,8 @@ #ifndef _LINUX_ERRNO_H #define _LINUX_ERRNO_H -#include +#include -#ifdef __KERNEL__ /* * These should never be seen by user programs. To return one of ERESTART* @@ -32,5 +31,3 @@ #define EIOCBRETRY 530 /* iocb queued, will trigger a retry */ #endif - -#endif diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index fd0628be45ce..9ca23fcfb5d7 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -1,33 +1,12 @@ #ifndef _LINUX_ERRQUEUE_H #define _LINUX_ERRQUEUE_H 1 -#include - -struct sock_extended_err { - __u32 ee_errno; - __u8 ee_origin; - __u8 ee_type; - __u8 ee_code; - __u8 ee_pad; - __u32 ee_info; - __u32 ee_data; -}; - -#define SO_EE_ORIGIN_NONE 0 -#define SO_EE_ORIGIN_LOCAL 1 -#define SO_EE_ORIGIN_ICMP 2 -#define SO_EE_ORIGIN_ICMP6 3 -#define SO_EE_ORIGIN_TXSTATUS 4 -#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS - -#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) - -#ifdef __KERNEL__ #include #if IS_ENABLED(CONFIG_IPV6) #include #endif +#include #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb)) @@ -44,5 +23,3 @@ struct sock_exterr_skb { }; #endif - -#endif diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index fcb4f8e60c1c..c8e3e7e39c6b 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -9,596 +9,12 @@ * scott.feldman@intel.com) * Portions Copyright (C) Sun Microsystems 2008 */ - #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H -#ifdef __KERNEL__ #include -#endif -#include -#include - -/* This should work for both 32 and 64 bit userland. */ -struct ethtool_cmd { - __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ - __u32 reserved[2]; -}; - -static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) -{ - - ep->speed = (__u16)speed; - ep->speed_hi = (__u16)(speed >> 16); -} - -static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) -{ - return (ep->speed_hi << 16) | ep->speed; -} - -/* Device supports clause 22 register access to PHY or peripherals - * using the interface defined in . This should not be - * set if there are known to be no such peripherals present or if - * the driver only emulates clause 22 registers for compatibility. - */ -#define ETH_MDIO_SUPPORTS_C22 1 - -/* Device supports clause 45 register access to PHY or peripherals - * using the interface defined in and . - * This should not be set if there are known to be no such peripherals - * present. - */ -#define ETH_MDIO_SUPPORTS_C45 2 - -#define ETHTOOL_FWVERS_LEN 32 -#define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ -struct ethtool_drvinfo { - __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ - char reserved1[32]; - char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ - __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ -}; - -#define SOPASS_MAX 6 -/* wake-on-lan settings */ -struct ethtool_wolinfo { - __u32 cmd; - __u32 supported; - __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; - -/* for passing single values */ -struct ethtool_value { - __u32 cmd; - __u32 data; -}; - -/* for passing big chunks of data */ -struct ethtool_regs { - __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ - __u8 data[0]; -}; - -/* for passing EEPROM chunks */ -struct ethtool_eeprom { - __u32 cmd; - __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ - __u8 data[0]; -}; - -/** - * struct ethtool_eee - Energy Efficient Ethernet information - * @cmd: ETHTOOL_{G,S}EEE - * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations - * for which there is EEE support. - * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations - * advertised as eee capable. - * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex - * combinations advertised by the link partner as eee capable. - * @eee_active: Result of the eee auto negotiation. - * @eee_enabled: EEE configured mode (enabled/disabled). - * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given - * that eee was negotiated. - * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting - * its tx lpi (after reaching 'idle' state). Effective only when eee - * was negotiated and tx_lpi_enabled was set. - */ -struct ethtool_eee { - __u32 cmd; - __u32 supported; - __u32 advertised; - __u32 lp_advertised; - __u32 eee_active; - __u32 eee_enabled; - __u32 tx_lpi_enabled; - __u32 tx_lpi_timer; - __u32 reserved[2]; -}; - -/** - * struct ethtool_modinfo - plugin module eeprom information - * @cmd: %ETHTOOL_GMODULEINFO - * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx - * @eeprom_len: Length of the eeprom - * - * This structure is used to return the information to - * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. - * The type code indicates the eeprom data format - */ -struct ethtool_modinfo { - __u32 cmd; - __u32 type; - __u32 eeprom_len; - __u32 reserved[8]; -}; - -/** - * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates - * @cmd: ETHTOOL_{G,S}COALESCE - * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after - * a packet arrives. - * @rx_max_coalesced_frames: Maximum number of packets to receive - * before an RX interrupt. - * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after - * a packet is sent. - * @tx_max_coalesced_frames: Maximum number of packets to be sent - * before a TX interrupt. - * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @stats_block_coalesce_usecs: How many usecs to delay in-memory - * statistics block updates. Some drivers do not have an - * in-memory statistic block, and in such cases this value is - * ignored. This value must not be zero. - * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. - * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. - * @pkt_rate_low: Threshold for low packet rate (packets per second). - * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is below @pkt_rate_low. - * @rx_max_coalesced_frames_low: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is below @pkt_rate_low. - * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is below @pkt_rate_low. - * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before - * a TX interrupt, when the packet rate is below @pkt_rate_low. - * @pkt_rate_high: Threshold for high packet rate (packets per second). - * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is above @pkt_rate_high. - * @rx_max_coalesced_frames_high: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is above @pkt_rate_high. - * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is above @pkt_rate_high. - * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before - * a TX interrupt, when the packet rate is above @pkt_rate_high. - * @rate_sample_interval: How often to do adaptive coalescing packet rate - * sampling, measured in seconds. Must not be zero. - * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: - * (usecs > 0 && time_since_first_completion >= usecs) || - * (max_frames > 0 && completed_frames >= max_frames) - * It is illegal to set both usecs and max_frames to zero as this - * would cause interrupts to never be generated. To disable - * coalescing, set usecs = 0 and max_frames = 1. - * - * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs - * This is deprecated. Drivers for hardware that does not support - * counting completions should validate that max_frames == !rx_usecs. - * - * Adaptive RX/TX coalescing is an algorithm implemented by some - * drivers to improve latency under low packet rates and improve - * throughput under high packet rates. Some drivers only implement - * one of RX or TX adaptive coalescing. Anything not implemented by - * the driver causes these values to be silently ignored. - * - * When the packet rate is below @pkt_rate_high but above - * @pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ -struct ethtool_coalesce { - __u32 cmd; - __u32 rx_coalesce_usecs; - __u32 rx_max_coalesced_frames; - __u32 rx_coalesce_usecs_irq; - __u32 rx_max_coalesced_frames_irq; - __u32 tx_coalesce_usecs; - __u32 tx_max_coalesced_frames; - __u32 tx_coalesce_usecs_irq; - __u32 tx_max_coalesced_frames_irq; - __u32 stats_block_coalesce_usecs; - __u32 use_adaptive_rx_coalesce; - __u32 use_adaptive_tx_coalesce; - __u32 pkt_rate_low; - __u32 rx_coalesce_usecs_low; - __u32 rx_max_coalesced_frames_low; - __u32 tx_coalesce_usecs_low; - __u32 tx_max_coalesced_frames_low; - __u32 pkt_rate_high; - __u32 rx_coalesce_usecs_high; - __u32 rx_max_coalesced_frames_high; - __u32 tx_coalesce_usecs_high; - __u32 tx_max_coalesced_frames_high; - __u32 rate_sample_interval; -}; - -/* for configuring RX/TX ring parameters */ -struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - __u32 rx_max_pending; - __u32 rx_mini_max_pending; - __u32 rx_jumbo_max_pending; - __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - __u32 rx_pending; - __u32 rx_mini_pending; - __u32 rx_jumbo_pending; - __u32 tx_pending; -}; - -/** - * struct ethtool_channels - configuring number of network channel - * @cmd: ETHTOOL_{G,S}CHANNELS - * @max_rx: Read only. Maximum number of receive channel the driver support. - * @max_tx: Read only. Maximum number of transmit channel the driver support. - * @max_other: Read only. Maximum number of other channel the driver support. - * @max_combined: Read only. Maximum number of combined channel the driver - * support. Set of queues RX, TX or other. - * @rx_count: Valid values are in the range 1 to the max_rx. - * @tx_count: Valid values are in the range 1 to the max_tx. - * @other_count: Valid values are in the range 1 to the max_other. - * @combined_count: Valid values are in the range 1 to the max_combined. - * - * This can be used to configure RX, TX and other channels. - */ - -struct ethtool_channels { - __u32 cmd; - __u32 max_rx; - __u32 max_tx; - __u32 max_other; - __u32 max_combined; - __u32 rx_count; - __u32 tx_count; - __u32 other_count; - __u32 combined_count; -}; - -/* for configuring link flow control parameters */ -struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - __u32 autoneg; - __u32 rx_pause; - __u32 tx_pause; -}; - -#define ETH_GSTRING_LEN 32 -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, - ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ - ETH_SS_FEATURES, -}; - -/* for passing string sets for data tagging */ -struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ - __u8 data[0]; -}; - -struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ - __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ -}; - -/** - * enum ethtool_test_flags - flags definition of ethtool_test - * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise - * only online tests. - * @ETH_TEST_FL_FAILED: Driver set this flag if test fails. - * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback - * test. - * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test - */ - -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), - ETH_TEST_FL_FAILED = (1 << 1), - ETH_TEST_FL_EXTERNAL_LB = (1 << 2), - ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), -}; - -/* for requesting NIC test and getting results*/ -struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ - __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ - __u64 data[0]; -}; - -/* for dumping NIC-specific statistics */ -struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ - __u64 data[0]; -}; - -struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ - __u32 size; - __u8 data[0]; -}; - -/* boolean flags controlling per-interface behavior characteristics. - * When reading, the flag indicates whether or not a certain behavior - * is enabled/present. When writing, the flag indicates whether - * or not the driver should turn on (set) or off (clear) a behavior. - * - * Some behaviors may read-only (unconditionally absent or present). - * If such is the case, return EINVAL in the set-flags operation if the - * flag differs from the read-only value. - */ -enum ethtool_flags { - ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ - ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ - ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ - ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ - ETH_FLAG_RXHASH = (1 << 28), -}; +#include -/* The following structures are for supporting RX network flow - * classification and RX n-tuple configuration. Note, all multibyte - * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to - * be in network byte order. - */ - -/** - * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. - * @ip4src: Source host - * @ip4dst: Destination host - * @psrc: Source port - * @pdst: Destination port - * @tos: Type-of-service - * - * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. - */ -struct ethtool_tcpip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be16 psrc; - __be16 pdst; - __u8 tos; -}; - -/** - * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @spi: Security parameters index - * @tos: Type-of-service - * - * This can be used to specify an IPsec transport or tunnel over IPv4. - */ -struct ethtool_ah_espip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 spi; - __u8 tos; -}; - -#define ETH_RX_NFC_IP4 1 - -/** - * struct ethtool_usrip4_spec - general flow specification for IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @l4_4_bytes: First 4 bytes of transport (layer 4) header - * @tos: Type-of-service - * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 - * @proto: Transport protocol number; mask must be 0 - */ -struct ethtool_usrip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 l4_4_bytes; - __u8 tos; - __u8 ip_ver; - __u8 proto; -}; - -union ethtool_flow_union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[60]; -}; - -struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; -}; - -/** - * struct ethtool_rx_flow_spec - classification rule for RX flows - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow fields to match (dependent on @flow_type) - * @h_ext: Additional fields to match - * @m_u: Masks for flow field bits to be matched - * @m_ext: Masks for additional field bits to be matched - * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. - * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC - * if packets should be discarded - * @location: Location of rule in the table. Locations must be - * numbered such that a flow matching multiple rules will be - * classified according to the first (lowest numbered) rule. - */ -struct ethtool_rx_flow_spec { - __u32 flow_type; - union ethtool_flow_union h_u; - struct ethtool_flow_ext h_ext; - union ethtool_flow_union m_u; - struct ethtool_flow_ext m_ext; - __u64 ring_cookie; - __u32 location; -}; - -/** - * struct ethtool_rxnfc - command to get or set RX flow classification rules - * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, - * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, - * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS - * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW - * @data: Command-dependent value - * @fs: Flow classification rule - * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of used rule locations - * - * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating - * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following - * structure fields must not be used. - * - * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues - * on return. - * - * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined - * rules on return. If @data is non-zero on return then it is the - * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the - * driver supports any special location values. If that flag is not - * set in @data then special location values should not be used. - * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an - * existing rule on entry and @fs contains the rule on return. - * - * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the - * user buffer for @rule_locs on entry. On return, @data is the size - * of the rule table, @rule_cnt is the number of defined rules, and - * @rule_locs contains the locations of the defined rules. Drivers - * must use the second parameter to get_rxnfc() instead of @rule_locs. - * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. - * @fs.@location either specifies the location to use or is a special - * location value with %RX_CLS_LOC_SPECIAL flag set. On return, - * @fs.@location is the actual rule location. - * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an - * existing rule on entry. - * - * A driver supporting the special location values for - * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused - * location, and may remove a rule at a later location (lower - * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; - * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum - * priority); and %RX_CLS_LOC_LAST, selecting the last suitable - * location (minimum priority). Additional special values may be - * defined in future and drivers must return -%EINVAL for any - * unrecognised value. - */ -struct ethtool_rxnfc { - __u32 cmd; - __u32 flow_type; - __u64 data; - struct ethtool_rx_flow_spec fs; - __u32 rule_cnt; - __u32 rule_locs[0]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT struct compat_ethtool_rx_flow_spec { @@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc { }; #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ - -/** - * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection - * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR - * @size: On entry, the array size of the user buffer, which may be zero. - * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware - * indirection table. - * @ring_index: RX ring/queue index for each hash value - * - * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size - * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means - * the table should be reset to default values. This last feature - * is not supported by the original implementations. - */ -struct ethtool_rxfh_indir { - __u32 cmd; - __u32 size; - __u32 ring_index[0]; -}; - -/** - * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow field values to match (dependent on @flow_type) - * @m_u: Masks for flow field value bits to be ignored - * @vlan_tag: VLAN tag to match - * @vlan_tag_mask: Mask for VLAN tag bits to be ignored - * @data: Driver-dependent data to match - * @data_mask: Mask for driver-dependent data bits to be ignored - * @action: RX ring/queue index to deliver to (non-negative) or other action - * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) - * - * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where - * a field value and mask are both zero this is treated as if all mask - * bits are set i.e. the field is ignored. - */ -struct ethtool_rx_ntuple_flow_spec { - __u32 flow_type; - union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[72]; - } h_u, m_u; - - __u16 vlan_tag; - __u16 vlan_tag_mask; - __u64 data; - __u64 data_mask; - - __s32 action; -#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ -#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ -}; - -/** - * struct ethtool_rx_ntuple - command to set or clear RX flow filter - * @cmd: Command number - %ETHTOOL_SRXNTUPLE - * @fs: Flow filter specification - */ -struct ethtool_rx_ntuple { - __u32 cmd; - struct ethtool_rx_ntuple_flow_spec fs; -}; - -#define ETHTOOL_FLASH_MAX_FILENAME 128 -enum ethtool_flash_op_type { - ETHTOOL_FLASH_ALL_REGIONS = 0, -}; - -/* for passing firmware flashing related parameters */ -struct ethtool_flash { - __u32 cmd; - __u32 region; - char data[ETHTOOL_FLASH_MAX_FILENAME]; -}; - -/** - * struct ethtool_dump - used for retrieving, setting device dump - * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or - * %ETHTOOL_SET_DUMP - * @version: FW version of the dump, filled in by driver - * @flag: driver dependent flag for dump setting, filled in by driver during - * get and filled in by ethtool for set operation. - * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when - * firmware dump is disabled. - * @len: length of dump data, used as the length of the user buffer on entry to - * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver - * for %ETHTOOL_GET_DUMP_FLAG command - * @data: data collected for get dump data operation - */ - -#define ETH_FW_DUMP_DISABLE 0 - -struct ethtool_dump { - __u32 cmd; - __u32 version; - __u32 flag; - __u32 len; - __u8 data[0]; -}; - -/* for returning and changing feature sets */ - -/** - * struct ethtool_get_features_block - block with state of 32 features - * @available: mask of changeable features - * @requested: mask of features requested to be enabled if possible - * @active: mask of currently enabled features - * @never_changed: mask of features not changeable for any device - */ -struct ethtool_get_features_block { - __u32 available; - __u32 requested; - __u32 active; - __u32 never_changed; -}; - -/** - * struct ethtool_gfeatures - command to get state of device's features - * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features - * @features: state of features - */ -struct ethtool_gfeatures { - __u32 cmd; - __u32 size; - struct ethtool_get_features_block features[0]; -}; - -/** - * struct ethtool_set_features_block - block with request for 32 features - * @valid: mask of features to be changed - * @requested: values of features to be changed - */ -struct ethtool_set_features_block { - __u32 valid; - __u32 requested; -}; - -/** - * struct ethtool_sfeatures - command to request change in device's features - * @cmd: command number = %ETHTOOL_SFEATURES - * @size: array size of the features[] array - * @features: feature change masks - */ -struct ethtool_sfeatures { - __u32 cmd; - __u32 size; - struct ethtool_set_features_block features[0]; -}; - -/** - * struct ethtool_ts_info - holds a device's timestamping and PHC association - * @cmd: command number = %ETHTOOL_GET_TS_INFO - * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags - * @phc_index: device index of the associated PHC, or -1 if there is none - * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values - * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values - * - * The bits in the 'tx_types' and 'rx_filters' fields correspond to - * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, - * respectively. For example, if the device supports HWTSTAMP_TX_ON, - * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set. - */ -struct ethtool_ts_info { - __u32 cmd; - __u32 so_timestamping; - __s32 phc_index; - __u32 tx_types; - __u32 tx_reserved[3]; - __u32 rx_filters; - __u32 rx_reserved[3]; -}; - -/* - * %ETHTOOL_SFEATURES changes features present in features[].valid to the - * values of corresponding bits in features[].requested. Bits in .requested - * not set in .valid or not changeable are ignored. - * - * Returns %EINVAL when .valid contains undefined or never-changeable bits - * or size is not equal to required number of features words (32-bit blocks). - * Returns >= 0 if request was completed; bits set in the value mean: - * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not - * changeable (not present in %ETHTOOL_GFEATURES' features[].available) - * those bits were ignored. - * %ETHTOOL_F_WISH - some or all changes requested were recorded but the - * resulting state of bits masked by .valid is not equal to .requested. - * Probably there are other device-specific constraints on some features - * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered - * here as though ignored bits were cleared. - * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling - * compatibility functions. Requested offload state cannot be properly - * managed by kernel. - * - * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of - * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands - * for ETH_SS_FEATURES string set. First entry in the table corresponds to least - * significant bit in features[0] fields. Empty strings mark undefined features. - */ -enum ethtool_sfeatures_retval_bits { - ETHTOOL_F_UNSUPPORTED__BIT, - ETHTOOL_F_WISH__BIT, - ETHTOOL_F_COMPAT__BIT, -}; - -#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) -#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) -#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) - -#ifdef __KERNEL__ #include @@ -1049,277 +248,4 @@ struct ethtool_ops { }; -#endif /* __KERNEL__ */ - -/* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings. */ -#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ -#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ -#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ -/* Get link status for host, i.e. whether the interface *and* the - * physical port (if there is one) are up (ethtool_value). */ -#define ETHTOOL_GLINK 0x0000000a -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value). */ -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ -#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ -#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ -#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ -#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ -#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ -#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ -#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ -#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ - -#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ -#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ -#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ -#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ -#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ -#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ -#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ -#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ -#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ -#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ -#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ -#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ -#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ -#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ -#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ -#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ -#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ - -#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ -#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ -#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ -#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ -#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ -#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ -#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ -#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ -#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ -#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ -#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ -#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ - -/* compatibility with older code */ -#define SPARC_ETH_GSET ETHTOOL_GSET -#define SPARC_ETH_SSET ETHTOOL_SSET - -/* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define SUPPORTED_2500baseX_Full (1 << 15) -#define SUPPORTED_Backplane (1 << 16) -#define SUPPORTED_1000baseKX_Full (1 << 17) -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#define SUPPORTED_10000baseKR_Full (1 << 19) -#define SUPPORTED_10000baseR_FEC (1 << 20) -#define SUPPORTED_20000baseMLD2_Full (1 << 21) -#define SUPPORTED_20000baseKR2_Full (1 << 22) -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) - -/* Indicates what features are advertised by the interface. */ -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) -#define ADVERTISED_2500baseX_Full (1 << 15) -#define ADVERTISED_Backplane (1 << 16) -#define ADVERTISED_1000baseKX_Full (1 << 17) -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#define ADVERTISED_10000baseKR_Full (1 << 19) -#define ADVERTISED_10000baseR_FEC (1 << 20) -#define ADVERTISED_20000baseMLD2_Full (1 << 21) -#define ADVERTISED_20000baseKR2_Full (1 << 22) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) - -/* The following are all involved in forcing a particular link - * mode for the device for setting things. When getting the - * devices settings, these indicate the current mode and whether - * it was forced up into this mode or autonegotiated. - */ - -/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define SPEED_2500 2500 -#define SPEED_10000 10000 -#define SPEED_UNKNOWN -1 - -/* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 -#define DUPLEX_UNKNOWN 0xff - -/* Which connector port. */ -#define PORT_TP 0x00 -#define PORT_AUI 0x01 -#define PORT_MII 0x02 -#define PORT_FIBRE 0x03 -#define PORT_BNC 0x04 -#define PORT_DA 0x05 -#define PORT_NONE 0xef -#define PORT_OTHER 0xff - -/* Which transceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 -#define XCVR_DUMMY1 0x02 -#define XCVR_DUMMY2 0x03 -#define XCVR_DUMMY3 0x04 - -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ -#define AUTONEG_DISABLE 0x00 -#define AUTONEG_ENABLE 0x01 - -/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then - * the driver is required to renegotiate link - */ -#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ -#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ -#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ -#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -/* L2-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ -#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ -#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ -#define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash only */ -#define UDP_V6_FLOW 0x06 /* hash only */ -#define SCTP_V6_FLOW 0x07 /* hash only */ -#define AH_ESP_V6_FLOW 0x08 /* hash only */ -#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ -#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash only */ -#define ESP_V6_FLOW 0x0c /* hash only */ -#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ -#define IPV4_FLOW 0x10 /* hash only */ -#define IPV6_FLOW 0x11 /* hash only */ -#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ -/* Flag to enable additional fields in struct ethtool_rx_flow_spec */ -#define FLOW_EXT 0x80000000 - -/* L3-L4 network traffic flow hash options */ -#define RXH_L2DA (1 << 1) -#define RXH_VLAN (1 << 2) -#define RXH_L3_PROTO (1 << 3) -#define RXH_IP_SRC (1 << 4) -#define RXH_IP_DST (1 << 5) -#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ -#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ -#define RXH_DISCARD (1 << 31) - -#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL - -/* Special RX classification rule insert location values */ -#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ -#define RX_CLS_LOC_ANY 0xffffffff -#define RX_CLS_LOC_FIRST 0xfffffffe -#define RX_CLS_LOC_LAST 0xfffffffd - -/* EEPROM Standards for plug in modules */ -#define ETH_MODULE_SFF_8079 0x1 -#define ETH_MODULE_SFF_8079_LEN 256 -#define ETH_MODULE_SFF_8472 0x2 -#define ETH_MODULE_SFF_8472_LEN 512 - -/* Reset flags */ -/* The reset() operation must clear the flags for the components which - * were actually reset. On successful return, the flags indicate the - * components which were not reset, either because they do not exist - * in the hardware or because they cannot be reset independently. The - * driver must never reset any components that were not requested. - */ -enum ethtool_reset_flags { - /* These flags represent components dedicated to the interface - * the command is addressed to. Shift any flag left by - * ETH_RESET_SHARED_SHIFT to reset a shared component of the - * same type. - */ - ETH_RESET_MGMT = 1 << 0, /* Management processor */ - ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ - ETH_RESET_DMA = 1 << 2, /* DMA engine */ - ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ - ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ - ETH_RESET_MAC = 1 << 5, /* Media access controller */ - ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ - ETH_RESET_RAM = 1 << 7, /* RAM shared between - * multiple components */ - - ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to - * this interface */ - ETH_RESET_ALL = 0xffffffff, /* All components used by this - * interface, even if shared */ -}; -#define ETH_RESET_SHARED_SHIFT 16 - #endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index 41085d0f3955..6daf6d4971f6 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -10,59 +10,11 @@ * Davide Libenzi * */ - #ifndef _LINUX_EVENTPOLL_H #define _LINUX_EVENTPOLL_H -/* For O_CLOEXEC */ -#include -#include - -/* Flags for epoll_create1. */ -#define EPOLL_CLOEXEC O_CLOEXEC - -/* Valid opcodes to issue to sys_epoll_ctl() */ -#define EPOLL_CTL_ADD 1 -#define EPOLL_CTL_DEL 2 -#define EPOLL_CTL_MOD 3 -#define EPOLL_CTL_DISABLE 4 - -/* - * Request the handling of system wakeup events so as to prevent system suspends - * from happening while those events are being processed. - * - * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be - * re-allowed until epoll_wait is called again after consuming the wakeup - * event(s). - * - * Requires CAP_BLOCK_SUSPEND - */ -#define EPOLLWAKEUP (1 << 29) - -/* Set the One Shot behaviour for the target file descriptor */ -#define EPOLLONESHOT (1 << 30) +#include -/* Set the Edge Triggered behaviour for the target file descriptor */ -#define EPOLLET (1 << 31) - -/* - * On x86-64 make the 64bit structure have the same alignment as the - * 32bit structure. This makes 32bit emulation easier. - * - * UML/x86_64 needs the same packing as x86_64 - */ -#ifdef __x86_64__ -#define EPOLL_PACKED __attribute__((packed)) -#else -#define EPOLL_PACKED -#endif - -struct epoll_event { - __u32 events; - __u64 data; -} EPOLL_PACKED; - -#ifdef __KERNEL__ /* Forward declarations to avoid compiler errors */ struct file; @@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {} #endif -#endif /* #ifdef __KERNEL__ */ - #endif /* #ifndef _LINUX_EVENTPOLL_H */ - diff --git a/include/linux/fadvise.h b/include/linux/fadvise.h deleted file mode 100644 index e8e747139b9a..000000000000 --- a/include/linux/fadvise.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef FADVISE_H_INCLUDED -#define FADVISE_H_INCLUDED - -#define POSIX_FADV_NORMAL 0 /* No further special treatment. */ -#define POSIX_FADV_RANDOM 1 /* Expect random page references. */ -#define POSIX_FADV_SEQUENTIAL 2 /* Expect sequential page references. */ -#define POSIX_FADV_WILLNEED 3 /* Will need these pages. */ - -/* - * The advise values for POSIX_FADV_DONTNEED and POSIX_ADV_NOREUSE - * for s390-64 differ from the values for the rest of the world. - */ -#if defined(__s390x__) -#define POSIX_FADV_DONTNEED 6 /* Don't need these pages. */ -#define POSIX_FADV_NOREUSE 7 /* Data will be accessed once. */ -#else -#define POSIX_FADV_DONTNEED 4 /* Don't need these pages. */ -#define POSIX_FADV_NOREUSE 5 /* Data will be accessed once. */ -#endif - -#endif /* FADVISE_H_INCLUDED */ diff --git a/include/linux/falloc.h b/include/linux/falloc.h index d39b824a780c..31591686ac2d 100644 --- a/include/linux/falloc.h +++ b/include/linux/falloc.h @@ -1,11 +1,8 @@ #ifndef _FALLOC_H_ #define _FALLOC_H_ -#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */ -#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ -#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ +#include -#ifdef __KERNEL__ /* * Space reservation ioctls and argument structure @@ -24,6 +21,4 @@ struct space_resv { #define FS_IOC_RESVSP _IOW('X', 40, struct space_resv) #define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv) -#endif /* __KERNEL__ */ - #endif /* _FALLOC_H_ */ diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h index 6c6133f76e16..cef93ddcc5a0 100644 --- a/include/linux/fanotify.h +++ b/include/linux/fanotify.h @@ -1,120 +1,8 @@ #ifndef _LINUX_FANOTIFY_H #define _LINUX_FANOTIFY_H -#include +#include -/* the following events that user-space can register for */ -#define FAN_ACCESS 0x00000001 /* File was accessed */ -#define FAN_MODIFY 0x00000002 /* File was modified */ -#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */ -#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define FAN_OPEN 0x00000020 /* File was opened */ - -#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ - -#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ -#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ - -#define FAN_ONDIR 0x40000000 /* event occurred against dir */ - -#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */ - -/* helper events */ -#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */ - -/* flags used for fanotify_init() */ -#define FAN_CLOEXEC 0x00000001 -#define FAN_NONBLOCK 0x00000002 - -/* These are NOT bitwise flags. Both bits are used togther. */ -#define FAN_CLASS_NOTIF 0x00000000 -#define FAN_CLASS_CONTENT 0x00000004 -#define FAN_CLASS_PRE_CONTENT 0x00000008 -#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \ - FAN_CLASS_PRE_CONTENT) - -#define FAN_UNLIMITED_QUEUE 0x00000010 -#define FAN_UNLIMITED_MARKS 0x00000020 - -#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ - FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\ - FAN_UNLIMITED_MARKS) - -/* flags used for fanotify_modify_mark() */ -#define FAN_MARK_ADD 0x00000001 -#define FAN_MARK_REMOVE 0x00000002 -#define FAN_MARK_DONT_FOLLOW 0x00000004 -#define FAN_MARK_ONLYDIR 0x00000008 -#define FAN_MARK_MOUNT 0x00000010 -#define FAN_MARK_IGNORED_MASK 0x00000020 -#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 -#define FAN_MARK_FLUSH 0x00000080 -#ifdef __KERNEL__ /* not valid from userspace, only kernel internal */ #define FAN_MARK_ONDIR 0x00000100 -#endif - -#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ - FAN_MARK_REMOVE |\ - FAN_MARK_DONT_FOLLOW |\ - FAN_MARK_ONLYDIR |\ - FAN_MARK_MOUNT |\ - FAN_MARK_IGNORED_MASK |\ - FAN_MARK_IGNORED_SURV_MODIFY |\ - FAN_MARK_FLUSH) - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define FAN_ALL_EVENTS (FAN_ACCESS |\ - FAN_MODIFY |\ - FAN_CLOSE |\ - FAN_OPEN) - -/* - * All events which require a permission response from userspace - */ -#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\ - FAN_ACCESS_PERM) - -#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ - FAN_ALL_PERM_EVENTS |\ - FAN_Q_OVERFLOW) - -#define FANOTIFY_METADATA_VERSION 3 - -struct fanotify_event_metadata { - __u32 event_len; - __u8 vers; - __u8 reserved; - __u16 metadata_len; - __aligned_u64 mask; - __s32 fd; - __s32 pid; -}; - -struct fanotify_response { - __s32 fd; - __u32 response; -}; - -/* Legit userspace responses to a _PERM event */ -#define FAN_ALLOW 0x01 -#define FAN_DENY 0x02 -/* No fd set in event */ -#define FAN_NOFD -1 - -/* Helper functions to deal with fanotify_event_metadata buffers */ -#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) - -#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \ - (struct fanotify_event_metadata*)(((char *)(meta)) + \ - (meta)->event_len)) - -#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len <= (long)(len)) - #endif /* _LINUX_FANOTIFY_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index ac3f1c605843..c7a95714b1fe 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -1,409 +1,10 @@ #ifndef _LINUX_FB_H #define _LINUX_FB_H -#include -#include -#ifdef __KERNEL__ #include -#endif /* __KERNEL__ */ +#include -/* Definitions of frame buffers */ - -#define FB_MAX 32 /* sufficient for now */ - -/* ioctls - 0x46 is 'F' */ -#define FBIOGET_VSCREENINFO 0x4600 -#define FBIOPUT_VSCREENINFO 0x4601 -#define FBIOGET_FSCREENINFO 0x4602 -#define FBIOGETCMAP 0x4604 -#define FBIOPUTCMAP 0x4605 -#define FBIOPAN_DISPLAY 0x4606 -#ifdef __KERNEL__ #define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user) -#else -#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor) -#endif -/* 0x4607-0x460B are defined below */ -/* #define FBIOGET_MONITORSPEC 0x460C */ -/* #define FBIOPUT_MONITORSPEC 0x460D */ -/* #define FBIOSWITCH_MONIBIT 0x460E */ -#define FBIOGET_CON2FBMAP 0x460F -#define FBIOPUT_CON2FBMAP 0x4610 -#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */ -#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank) -#define FBIO_ALLOC 0x4613 -#define FBIO_FREE 0x4614 -#define FBIOGET_GLYPH 0x4615 -#define FBIOGET_HWCINFO 0x4616 -#define FBIOPUT_MODEINFO 0x4617 -#define FBIOGET_DISPINFO 0x4618 -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) - -#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ -#define FB_TYPE_PLANES 1 /* Non interleaved planes */ -#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */ -#define FB_TYPE_TEXT 3 /* Text/attributes */ -#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */ -#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */ - -#define FB_AUX_TEXT_MDA 0 /* Monochrome text */ -#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */ -#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */ -#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */ -#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */ -#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */ -#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */ - -#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */ -#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */ -#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */ - -#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ -#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ -#define FB_VISUAL_TRUECOLOR 2 /* True color */ -#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ -#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ -#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ -#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */ - -#define FB_ACCEL_NONE 0 /* no hardware accelerator */ -#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */ -#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */ -#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */ -#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */ -#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */ -#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */ -#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */ -#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */ -#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */ -#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */ -#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */ -#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */ -#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */ -#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */ -#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */ -#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */ -#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */ -#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */ -#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */ -#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */ -#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */ -#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */ -#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */ -#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */ -#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */ -#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */ -#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */ -#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */ -#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */ -#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */ -#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */ -#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */ -#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */ -#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */ -#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */ -#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */ -#define FB_ACCEL_I810 39 /* Intel 810/815 */ -#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */ -#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */ -#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */ -#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */ -#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */ -#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */ -#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */ -#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ -#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ -#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ -#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */ -#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ -#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ -#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ -#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */ -#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ -#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ -#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ -#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */ -#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */ -#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */ -#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ -#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ -#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ -#define FB_ACCEL_PXA3XX 99 /* PXA3xx */ - -#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ -#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ -#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */ -#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */ -#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */ -#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */ -#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */ -#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */ -#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */ -#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */ -#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */ -#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */ -#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */ -#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */ -#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */ - -#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */ - -#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */ - -struct fb_fix_screeninfo { - char id[16]; /* identification string eg "TT Builtin" */ - unsigned long smem_start; /* Start of frame buffer mem */ - /* (physical address) */ - __u32 smem_len; /* Length of frame buffer mem */ - __u32 type; /* see FB_TYPE_* */ - __u32 type_aux; /* Interleave for interleaved Planes */ - __u32 visual; /* see FB_VISUAL_* */ - __u16 xpanstep; /* zero if no hardware panning */ - __u16 ypanstep; /* zero if no hardware panning */ - __u16 ywrapstep; /* zero if no hardware ywrap */ - __u32 line_length; /* length of a line in bytes */ - unsigned long mmio_start; /* Start of Memory Mapped I/O */ - /* (physical address) */ - __u32 mmio_len; /* Length of Memory Mapped I/O */ - __u32 accel; /* Indicate to driver which */ - /* specific chip/card we have */ - __u16 capabilities; /* see FB_CAP_* */ - __u16 reserved[2]; /* Reserved for future compatibility */ -}; - -/* Interpretation of offset for color fields: All offsets are from the right, - * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you - * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. - * - * For pseudocolor: offset and length should be the same for all color - * components. Offset specifies the position of the least significant bit - * of the pallette index in a pixel value. Length indicates the number - * of available palette entries (i.e. # of entries = 1 << length). - */ -struct fb_bitfield { - __u32 offset; /* beginning of bitfield */ - __u32 length; /* length of bitfield */ - __u32 msb_right; /* != 0 : Most significant bit is */ - /* right */ -}; - -#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ -#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ - -#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ -#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ -#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ -#define FB_ACTIVATE_MASK 15 - /* values */ -#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ -#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ -#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ -#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ -#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ - -#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */ - -#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ -#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ -#define FB_SYNC_EXT 4 /* external sync */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ - /* vtotal = 144d/288n/576i => PAL */ - /* vtotal = 121d/242n/484i => NTSC */ -#define FB_SYNC_ON_GREEN 32 /* sync on green */ - -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ -#define FB_VMODE_INTERLACED 1 /* interlaced */ -#define FB_VMODE_DOUBLE 2 /* double scan */ -#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ -#define FB_VMODE_MASK 255 - -#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ -#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ -#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ - -/* - * Display rotation support - */ -#define FB_ROTATE_UR 0 -#define FB_ROTATE_CW 1 -#define FB_ROTATE_UD 2 -#define FB_ROTATE_CCW 3 - -#define PICOS2KHZ(a) (1000000000UL/(a)) -#define KHZ2PICOS(a) (1000000000UL/(a)) - -struct fb_var_screeninfo { - __u32 xres; /* visible resolution */ - __u32 yres; - __u32 xres_virtual; /* virtual resolution */ - __u32 yres_virtual; - __u32 xoffset; /* offset from virtual to visible */ - __u32 yoffset; /* resolution */ - - __u32 bits_per_pixel; /* guess what */ - __u32 grayscale; /* 0 = color, 1 = grayscale, */ - /* >1 = FOURCC */ - struct fb_bitfield red; /* bitfield in fb mem if true color, */ - struct fb_bitfield green; /* else only length is significant */ - struct fb_bitfield blue; - struct fb_bitfield transp; /* transparency */ - - __u32 nonstd; /* != 0 Non standard pixel format */ - - __u32 activate; /* see FB_ACTIVATE_* */ - - __u32 height; /* height of picture in mm */ - __u32 width; /* width of picture in mm */ - - __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ - - /* Timing: All values in pixclocks, except pixclock (of course) */ - __u32 pixclock; /* pixel clock in ps (pico seconds) */ - __u32 left_margin; /* time from sync to picture */ - __u32 right_margin; /* time from picture to sync */ - __u32 upper_margin; /* time from sync to picture */ - __u32 lower_margin; - __u32 hsync_len; /* length of horizontal sync */ - __u32 vsync_len; /* length of vertical sync */ - __u32 sync; /* see FB_SYNC_* */ - __u32 vmode; /* see FB_VMODE_* */ - __u32 rotate; /* angle we rotate counter clockwise */ - __u32 colorspace; /* colorspace for FOURCC-based modes */ - __u32 reserved[4]; /* Reserved for future compatibility */ -}; - -struct fb_cmap { - __u32 start; /* First entry */ - __u32 len; /* Number of entries */ - __u16 *red; /* Red values */ - __u16 *green; - __u16 *blue; - __u16 *transp; /* transparency, can be NULL */ -}; - -struct fb_con2fbmap { - __u32 console; - __u32 framebuffer; -}; - -/* VESA Blanking Levels */ -#define VESA_NO_BLANKING 0 -#define VESA_VSYNC_SUSPEND 1 -#define VESA_HSYNC_SUSPEND 2 -#define VESA_POWERDOWN 3 - - -enum { - /* screen: unblanked, hsync: on, vsync: on */ - FB_BLANK_UNBLANK = VESA_NO_BLANKING, - - /* screen: blanked, hsync: on, vsync: on */ - FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, - - /* screen: blanked, hsync: on, vsync: off */ - FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: on */ - FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: off */ - FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 -}; - -#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ -#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ -#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ -#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ -#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ -#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ -#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ -#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ -#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ - -struct fb_vblank { - __u32 flags; /* FB_VBLANK flags */ - __u32 count; /* counter of retraces since boot */ - __u32 vcount; /* current scanline position */ - __u32 hcount; /* current scandot position */ - __u32 reserved[4]; /* reserved for future compatibility */ -}; - -/* Internal HW accel */ -#define ROP_COPY 0 -#define ROP_XOR 1 - -struct fb_copyarea { - __u32 dx; - __u32 dy; - __u32 width; - __u32 height; - __u32 sx; - __u32 sy; -}; - -struct fb_fillrect { - __u32 dx; /* screen-relative */ - __u32 dy; - __u32 width; - __u32 height; - __u32 color; - __u32 rop; -}; - -struct fb_image { - __u32 dx; /* Where to place image */ - __u32 dy; - __u32 width; /* Size of image */ - __u32 height; - __u32 fg_color; /* Only used when a mono bitmap */ - __u32 bg_color; - __u8 depth; /* Depth of the image */ - const char *data; /* Pointer to image data */ - struct fb_cmap cmap; /* color map info */ -}; - -/* - * hardware cursor control - */ - -#define FB_CUR_SETIMAGE 0x01 -#define FB_CUR_SETPOS 0x02 -#define FB_CUR_SETHOT 0x04 -#define FB_CUR_SETCMAP 0x08 -#define FB_CUR_SETSHAPE 0x10 -#define FB_CUR_SETSIZE 0x20 -#define FB_CUR_SETALL 0xFF - -struct fbcurpos { - __u16 x, y; -}; - -struct fb_cursor { - __u16 set; /* what to set */ - __u16 enable; /* cursor on/off */ - __u16 rop; /* bitop operation */ - const char *mask; /* cursor mask bits */ - struct fbcurpos hot; /* cursor hot spot */ - struct fb_image image; /* Cursor image */ -}; - -#ifdef CONFIG_FB_BACKLIGHT -/* Settings for the generic backlight code */ -#define FB_BACKLIGHT_LEVELS 128 -#define FB_BACKLIGHT_MAX 0xFF -#endif - -#ifdef __KERNEL__ #include #include @@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var, const struct fb_videomode *default_mode, unsigned int default_bpp); -#endif /* __KERNEL__ */ - #endif /* _LINUX_FB_H */ diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h index f550f894ba15..76ce329e656d 100644 --- a/include/linux/fcntl.h +++ b/include/linux/fcntl.h @@ -1,54 +1,8 @@ #ifndef _LINUX_FCNTL_H #define _LINUX_FCNTL_H -#include +#include -#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0) -#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) - -/* - * Cancel a blocking posix lock; internal use only until we expose an - * asynchronous lock api to userspace: - */ -#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5) - -/* Create a file descriptor with FD_CLOEXEC set. */ -#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) - -/* - * Request nofications on a directory. - * See below for events that may be notified. - */ -#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) - -/* - * Set and get of pipe page size array - */ -#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) -#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8) - -/* - * Types of directory notifications that may be requested. - */ -#define DN_ACCESS 0x00000001 /* File accessed */ -#define DN_MODIFY 0x00000002 /* File modified */ -#define DN_CREATE 0x00000004 /* File created */ -#define DN_DELETE 0x00000008 /* File removed */ -#define DN_RENAME 0x00000010 /* File renamed */ -#define DN_ATTRIB 0x00000020 /* File changed attibutes */ -#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */ - -#define AT_FDCWD -100 /* Special value used to indicate - openat should use the current - working directory. */ -#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */ -#define AT_REMOVEDIR 0x200 /* Remove directory instead of - unlinking file. */ -#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */ -#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */ -#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */ - -#ifdef __KERNEL__ #ifndef force_o_largefile #define force_o_largefile() (BITS_PER_LONG != 32) @@ -74,6 +28,4 @@ #define IS_SETLK(cmd) (IS_SETLK32(cmd) || IS_SETLK64(cmd)) #define IS_SETLKW(cmd) (IS_SETLKW32(cmd) || IS_SETLKW64(cmd)) -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/fd.h b/include/linux/fd.h index 72202b1b9a6a..69275bccc3e4 100644 --- a/include/linux/fd.h +++ b/include/linux/fd.h @@ -1,384 +1,8 @@ #ifndef _LINUX_FD_H #define _LINUX_FD_H -#include -#include +#include -/* New file layout: Now the ioctl definitions immediately follow the - * definitions of the structures that they use */ - -/* - * Geometry - */ -struct floppy_struct { - unsigned int size, /* nr of sectors total */ - sect, /* sectors per track */ - head, /* nr of heads */ - track, /* nr of tracks */ - stretch; /* bit 0 !=0 means double track steps */ - /* bit 1 != 0 means swap sides */ - /* bits 2..9 give the first sector */ - /* number (the LSB is flipped) */ -#define FD_STRETCH 1 -#define FD_SWAPSIDES 2 -#define FD_ZEROBASED 4 -#define FD_SECTBASEMASK 0x3FC -#define FD_MKSECTBASE(s) (((s) ^ 1) << 2) -#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1) - - unsigned char gap, /* gap1 size */ - - rate, /* data rate. |= 0x40 for perpendicular */ -#define FD_2M 0x4 -#define FD_SIZECODEMASK 0x38 -#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) -#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ - 512 : 128 << FD_SIZECODE(floppy) ) -#define FD_PERP 0x40 - - spec1, /* stepping rate, head unload time */ - fmt_gap; /* gap2 size */ - const char * name; /* used only for predefined formats */ -}; - - -/* commands needing write access have 0x40 set */ -/* commands needing super user access have 0x80 set */ - -#define FDCLRPRM _IO(2, 0x41) -/* clear user-defined parameters */ - -#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) -#define FDSETMEDIAPRM FDSETPRM -/* set user-defined parameters for current media */ - -#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) -#define FDGETPRM _IOR(2, 0x04, struct floppy_struct) -#define FDDEFMEDIAPRM FDDEFPRM -#define FDGETMEDIAPRM FDGETPRM -/* set/get disk parameters */ - - -#define FDMSGON _IO(2,0x45) -#define FDMSGOFF _IO(2,0x46) -/* issue/don't issue kernel messages on media type change */ - - -/* - * Formatting (obsolete) - */ -#define FD_FILL_BYTE 0xF6 /* format fill byte. */ - -struct format_descr { - unsigned int device,head,track; -}; - -#define FDFMTBEG _IO(2,0x47) -/* begin formatting a disk */ -#define FDFMTTRK _IOW(2,0x48, struct format_descr) -/* format the specified track */ -#define FDFMTEND _IO(2,0x49) -/* end formatting a disk */ - - -/* - * Error thresholds - */ -struct floppy_max_errors { - unsigned int - abort, /* number of errors to be reached before aborting */ - read_track, /* maximal number of errors permitted to read an - * entire track at once */ - reset, /* maximal number of errors before a reset is tried */ - recal, /* maximal number of errors before a recalibrate is - * tried */ - - /* - * Threshold for reporting FDC errors to the console. - * Setting this to zero may flood your screen when using - * ultra cheap floppies ;-) - */ - reporting; - -}; - -#define FDSETEMSGTRESH _IO(2,0x4a) -/* set fdc error reporting threshold */ - -#define FDFLUSH _IO(2,0x4b) -/* flush buffers for media; either for verifying media, or for - * handling a media change without closing the file descriptor */ - -#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) -#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) -/* set/get abortion and read_track threshold. See also floppy_drive_params - * structure */ - - -typedef char floppy_drive_name[16]; -#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) -/* get drive type: 5 1/4 or 3 1/2 */ - - -/* - * Drive parameters (user modifiable) - */ -struct floppy_drive_params { - signed char cmos; /* CMOS type */ - - /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms - * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). - */ - unsigned long max_dtr; /* Step rate, usec */ - unsigned long hlt; /* Head load/settle time, msec */ - unsigned long hut; /* Head unload time (remnant of - * 8" drives) */ - unsigned long srt; /* Step rate, usec */ - - unsigned long spinup; /* time needed for spinup (expressed - * in jiffies) */ - unsigned long spindown; /* timeout needed for spindown */ - unsigned char spindown_offset; /* decides in which position the disk - * will stop */ - unsigned char select_delay; /* delay to wait after select */ - unsigned char rps; /* rotations per second */ - unsigned char tracks; /* maximum number of tracks */ - unsigned long timeout; /* timeout for interrupt requests */ - - unsigned char interleave_sect; /* if there are more sectors, use - * interleave */ - - struct floppy_max_errors max_errors; - - char flags; /* various flags, including ftd_msg */ -/* - * Announce successful media type detection and media information loss after - * disk changes. - * Also used to enable/disable printing of overrun warnings. - */ - -#define FTD_MSG 0x10 -#define FD_BROKEN_DCL 0x20 -#define FD_DEBUG 0x02 -#define FD_SILENT_DCL_CLEAR 0x4 -#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware - considerations */ - - char read_track; /* use readtrack during probing? */ - -/* - * Auto-detection. Each drive type has eight formats which are - * used in succession to try to read the disk. If the FDC cannot lock onto - * the disk, the next format is tried. This uses the variable 'probing'. - */ - short autodetect[8]; /* autodetected formats */ - - int checkfreq; /* how often should the drive be checked for disk - * changes */ - int native_format; /* native format of this drive */ -}; - -enum { - FD_NEED_TWADDLE_BIT, /* more magic */ - FD_VERIFY_BIT, /* inquire for write protection */ - FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet - * to clear media change status */ - FD_UNUSED_BIT, - FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ - FD_DISK_WRITABLE_BIT /* disk is writable */ -}; - -#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) -#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) -/* set/get drive parameters */ - - -/* - * Current drive state (not directly modifiable by user, readonly) - */ -struct floppy_drive_struct { - unsigned long flags; -/* values for these flags */ -#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) -#define FD_VERIFY (1 << FD_VERIFY_BIT) -#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) -#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) -#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) - - unsigned long spinup_date; - unsigned long select_date; - unsigned long first_read_date; - short probed_format; - short track; /* current track */ - short maxblock; /* id of highest block read */ - short maxtrack; /* id of highest half track read */ - int generation; /* how many diskchanges? */ - -/* - * (User-provided) media information is _not_ discarded after a media change - * if the corresponding keep_data flag is non-zero. Positive values are - * decremented after each probe. - */ - int keep_data; - - /* Prevent "aliased" accesses. */ - int fd_ref; - int fd_device; - unsigned long last_checked; /* when was the drive last checked for a disk - * change? */ - - char *dmabuf; - int bufblocks; -}; - -#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) -#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) -/* get drive state: GET returns the cached state, POLL polls for new state */ - - -/* - * reset FDC - */ -enum reset_mode { - FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ - FD_RESET_IF_RAWCMD, /* obsolete */ - FD_RESET_ALWAYS /* reset always */ -}; -#define FDRESET _IO(2, 0x54) - - -/* - * FDC state - */ -struct floppy_fdc_state { - int spec1; /* spec1 value last used */ - int spec2; /* spec2 value last used */ - int dtr; - unsigned char version; /* FDC version code */ - unsigned char dor; - unsigned long address; /* io address */ - unsigned int rawcmd:2; - unsigned int reset:1; - unsigned int need_configure:1; - unsigned int perp_mode:2; - unsigned int has_fifo:1; - unsigned int driver_version; /* version code for floppy driver */ -#define FD_DRIVER_VERSION 0x100 -/* user programs using the floppy API should use floppy_fdc_state to - * get the version number of the floppy driver that they are running - * on. If this version number is bigger than the one compiled into the - * user program (the FD_DRIVER_VERSION define), it should be prepared - * to bigger structures - */ - - unsigned char track[4]; - /* Position of the heads of the 4 units attached to this FDC, - * as stored on the FDC. In the future, the position as stored - * on the FDC might not agree with the actual physical - * position of these drive heads. By allowing such - * disagreement, it will be possible to reset the FDC without - * incurring the expensive cost of repositioning all heads. - * Right now, these positions are hard wired to 0. */ - -}; - -#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) - - -/* - * Asynchronous Write error tracking - */ -struct floppy_write_errors { - /* Write error logging. - * - * These fields can be cleared with the FDWERRORCLR ioctl. - * Only writes that were attempted but failed due to a physical media - * error are logged. write(2) calls that fail and return an error code - * to the user process are not counted. - */ - - unsigned int write_errors; /* number of physical write errors - * encountered */ - - /* position of first and last write errors */ - unsigned long first_error_sector; - int first_error_generation; - unsigned long last_error_sector; - int last_error_generation; - - unsigned int badness; /* highest retry count for a read or write - * operation */ -}; - -#define FDWERRORCLR _IO(2, 0x56) -/* clear write error and badness information */ -#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) -/* get write error and badness information */ - - -/* - * Raw commands - */ -/* new interface flag: now we can do them in batches */ -#define FDHAVEBATCHEDRAWCMD - -struct floppy_raw_cmd { - unsigned int flags; -#define FD_RAW_READ 1 -#define FD_RAW_WRITE 2 -#define FD_RAW_NO_MOTOR 4 -#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ -#define FD_RAW_INTR 8 /* wait for an interrupt */ -#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ -#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command - * completion */ -#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ -#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ - -/* more "in" flags */ -#define FD_RAW_MORE 0x100 /* more records follow */ -#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ -#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ -#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure - * detection too */ - -/* more "out" flags */ -#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ -#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ - - void __user *data; - char *kernel_data; /* location of data buffer in the kernel */ - struct floppy_raw_cmd *next; /* used for chaining of raw cmd's - * within the kernel */ - long length; /* in: length of dma transfer. out: remaining bytes */ - long phys_length; /* physical length, if different from dma length */ - int buffer_length; /* length of allocated buffer */ - - unsigned char rate; - unsigned char cmd_count; - unsigned char cmd[16]; - unsigned char reply_count; - unsigned char reply[16]; - int track; - int resultcode; - - int reserved1; - int reserved2; -}; - -#define FDRAWCMD _IO(2, 0x58) -/* send a raw command to the fdc. Structure size not included, because of - * batches */ - -#define FDTWADDLE _IO(2, 0x59) -/* flicker motor-on bit before reading a sector. Experimental */ - - -#define FDEJECT _IO(2, 0x5a) -/* eject the disk */ - - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include @@ -398,5 +22,3 @@ struct compat_floppy_struct { #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct) #endif #endif - -#endif diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h deleted file mode 100644 index 61ce64169004..000000000000 --- a/include/linux/fdreg.h +++ /dev/null @@ -1,137 +0,0 @@ -#ifndef _LINUX_FDREG_H -#define _LINUX_FDREG_H -/* - * This file contains some defines for the floppy disk controller. - * Various sources. Mostly "IBM Microcomputers: A Programmers - * Handbook", Sanches and Canton. - */ - -#ifdef FDPATCHES -#define FD_IOPORT fdc_state[fdc].address -#else -/* It would be a lot saner just to force fdc_state[fdc].address to always - be set ! FIXME */ -#define FD_IOPORT 0x3f0 -#endif - -/* Fd controller regs. S&C, about page 340 */ -#define FD_STATUS (4 + FD_IOPORT ) -#define FD_DATA (5 + FD_IOPORT ) - -/* Digital Output Register */ -#define FD_DOR (2 + FD_IOPORT ) - -/* Digital Input Register (read) */ -#define FD_DIR (7 + FD_IOPORT ) - -/* Diskette Control Register (write)*/ -#define FD_DCR (7 + FD_IOPORT ) - -/* Bits of main status register */ -#define STATUS_BUSYMASK 0x0F /* drive busy mask */ -#define STATUS_BUSY 0x10 /* FDC busy */ -#define STATUS_DMA 0x20 /* 0- DMA mode */ -#define STATUS_DIR 0x40 /* 0- cpu->fdc */ -#define STATUS_READY 0x80 /* Data reg ready */ - -/* Bits of FD_ST0 */ -#define ST0_DS 0x03 /* drive select mask */ -#define ST0_HA 0x04 /* Head (Address) */ -#define ST0_NR 0x08 /* Not Ready */ -#define ST0_ECE 0x10 /* Equipment check error */ -#define ST0_SE 0x20 /* Seek end */ -#define ST0_INTR 0xC0 /* Interrupt code mask */ - -/* Bits of FD_ST1 */ -#define ST1_MAM 0x01 /* Missing Address Mark */ -#define ST1_WP 0x02 /* Write Protect */ -#define ST1_ND 0x04 /* No Data - unreadable */ -#define ST1_OR 0x10 /* OverRun */ -#define ST1_CRC 0x20 /* CRC error in data or addr */ -#define ST1_EOC 0x80 /* End Of Cylinder */ - -/* Bits of FD_ST2 */ -#define ST2_MAM 0x01 /* Missing Address Mark (again) */ -#define ST2_BC 0x02 /* Bad Cylinder */ -#define ST2_SNS 0x04 /* Scan Not Satisfied */ -#define ST2_SEH 0x08 /* Scan Equal Hit */ -#define ST2_WC 0x10 /* Wrong Cylinder */ -#define ST2_CRC 0x20 /* CRC error in data field */ -#define ST2_CM 0x40 /* Control Mark = deleted */ - -/* Bits of FD_ST3 */ -#define ST3_HA 0x04 /* Head (Address) */ -#define ST3_DS 0x08 /* drive is double-sided */ -#define ST3_TZ 0x10 /* Track Zero signal (1=track 0) */ -#define ST3_RY 0x20 /* drive is ready */ -#define ST3_WP 0x40 /* Write Protect */ -#define ST3_FT 0x80 /* Drive Fault */ - -/* Values for FD_COMMAND */ -#define FD_RECALIBRATE 0x07 /* move to track 0 */ -#define FD_SEEK 0x0F /* seek track */ -#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */ -#define FD_WRITE 0xC5 /* write with MT, MFM */ -#define FD_SENSEI 0x08 /* Sense Interrupt Status */ -#define FD_SPECIFY 0x03 /* specify HUT etc */ -#define FD_FORMAT 0x4D /* format one track */ -#define FD_VERSION 0x10 /* get version code */ -#define FD_CONFIGURE 0x13 /* configure FIFO operation */ -#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */ -#define FD_GETSTATUS 0x04 /* read ST3 */ -#define FD_DUMPREGS 0x0E /* dump the contents of the fdc regs */ -#define FD_READID 0xEA /* prints the header of a sector */ -#define FD_UNLOCK 0x14 /* Fifo config unlock */ -#define FD_LOCK 0x94 /* Fifo config lock */ -#define FD_RSEEK_OUT 0x8f /* seek out (i.e. to lower tracks) */ -#define FD_RSEEK_IN 0xcf /* seek in (i.e. to higher tracks) */ - -/* the following commands are new in the 82078. They are not used in the - * floppy driver, except the first three. These commands may be useful for apps - * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at - * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */ - -#define FD_PARTID 0x18 /* part id ("extended" version cmd) */ -#define FD_SAVE 0x2e /* save fdc regs for later restore */ -#define FD_DRIVESPEC 0x8e /* drive specification: Access to the - * 2 Mbps data transfer rate for tape - * drives */ - -#define FD_RESTORE 0x4e /* later restore */ -#define FD_POWERDOWN 0x27 /* configure FDC's powersave features */ -#define FD_FORMAT_N_WRITE 0xef /* format and write in one go. */ -#define FD_OPTION 0x33 /* ISO format (which is a clean way to - * pack more sectors on a track) */ - -/* DMA commands */ -#define DMA_READ 0x46 -#define DMA_WRITE 0x4A - -/* FDC version return types */ -#define FDC_NONE 0x00 -#define FDC_UNKNOWN 0x10 /* DO NOT USE THIS TYPE EXCEPT IF IDENTIFICATION - FAILS EARLY */ -#define FDC_8272A 0x20 /* Intel 8272a, NEC 765 */ -#define FDC_765ED 0x30 /* Non-Intel 1MB-compatible FDC, can't detect */ -#define FDC_82072 0x40 /* Intel 82072; 8272a + FIFO + DUMPREGS */ -#define FDC_82072A 0x45 /* 82072A (on Sparcs) */ -#define FDC_82077_ORIG 0x51 /* Original version of 82077AA, sans LOCK */ -#define FDC_82077 0x52 /* 82077AA-1 */ -#define FDC_82078_UNKN 0x5f /* Unknown 82078 variant */ -#define FDC_82078 0x60 /* 44pin 82078 or 64pin 82078SL */ -#define FDC_82078_1 0x61 /* 82078-1 (2Mbps fdc) */ -#define FDC_S82078B 0x62 /* S82078B (first seen on Adaptec AVA-2825 VLB - * SCSI/EIDE/Floppy controller) */ -#define FDC_87306 0x63 /* National Semiconductor PC 87306 */ - -/* - * Beware: the fdc type list is roughly sorted by increasing features. - * Presence of features is tested by comparing the FDC version id with the - * "oldest" version that has the needed feature. - * If during FDC detection, an obscure test fails late in the sequence, don't - * assign FDC_UNKNOWN. Else the FDC will be treated as a dumb 8272a, or worse. - * This is especially true if the tests are unneeded. - */ - -#define FD_RESET_DELAY 20 -#endif diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h deleted file mode 100644 index 51da65b68b85..000000000000 --- a/include/linux/fib_rules.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef __LINUX_FIB_RULES_H -#define __LINUX_FIB_RULES_H - -#include -#include - -/* rule is permanent, and cannot be deleted */ -#define FIB_RULE_PERMANENT 0x00000001 -#define FIB_RULE_INVERT 0x00000002 -#define FIB_RULE_UNRESOLVED 0x00000004 -#define FIB_RULE_IIF_DETACHED 0x00000008 -#define FIB_RULE_DEV_DETACHED FIB_RULE_IIF_DETACHED -#define FIB_RULE_OIF_DETACHED 0x00000010 - -/* try to find source address in routing lookups */ -#define FIB_RULE_FIND_SADDR 0x00010000 - -struct fib_rule_hdr { - __u8 family; - __u8 dst_len; - __u8 src_len; - __u8 tos; - - __u8 table; - __u8 res1; /* reserved */ - __u8 res2; /* reserved */ - __u8 action; - - __u32 flags; -}; - -enum { - FRA_UNSPEC, - FRA_DST, /* destination address */ - FRA_SRC, /* source address */ - FRA_IIFNAME, /* interface name */ -#define FRA_IFNAME FRA_IIFNAME - FRA_GOTO, /* target to jump to (FR_ACT_GOTO) */ - FRA_UNUSED2, - FRA_PRIORITY, /* priority/preference */ - FRA_UNUSED3, - FRA_UNUSED4, - FRA_UNUSED5, - FRA_FWMARK, /* mark */ - FRA_FLOW, /* flow/class id */ - FRA_UNUSED6, - FRA_UNUSED7, - FRA_UNUSED8, - FRA_TABLE, /* Extended table id */ - FRA_FWMASK, /* mask for netfilter mark */ - FRA_OIFNAME, - __FRA_MAX -}; - -#define FRA_MAX (__FRA_MAX - 1) - -enum { - FR_ACT_UNSPEC, - FR_ACT_TO_TBL, /* Pass to fixed table */ - FR_ACT_GOTO, /* Jump to another rule */ - FR_ACT_NOP, /* No operation */ - FR_ACT_RES3, - FR_ACT_RES4, - FR_ACT_BLACKHOLE, /* Drop without notification */ - FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */ - FR_ACT_PROHIBIT, /* Drop with EACCES */ - __FR_ACT_MAX, -}; - -#define FR_ACT_MAX (__FR_ACT_MAX - 1) - -#endif diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h deleted file mode 100644 index d830747f5c0b..000000000000 --- a/include/linux/fiemap.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * FS_IOC_FIEMAP ioctl infrastructure. - * - * Some portions copyright (C) 2007 Cluster File Systems, Inc - * - * Authors: Mark Fasheh - * Kalpak Shah - * Andreas Dilger - */ - -#ifndef _LINUX_FIEMAP_H -#define _LINUX_FIEMAP_H - -#include - -struct fiemap_extent { - __u64 fe_logical; /* logical offset in bytes for the start of - * the extent from the beginning of the file */ - __u64 fe_physical; /* physical offset in bytes for the start - * of the extent from the beginning of the disk */ - __u64 fe_length; /* length in bytes for this extent */ - __u64 fe_reserved64[2]; - __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ - __u32 fe_reserved[3]; -}; - -struct fiemap { - __u64 fm_start; /* logical offset (inclusive) at - * which to start mapping (in) */ - __u64 fm_length; /* logical length of mapping which - * userspace wants (in) */ - __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ - __u32 fm_mapped_extents;/* number of extents that were mapped (out) */ - __u32 fm_extent_count; /* size of fm_extents array (in) */ - __u32 fm_reserved; - struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ -}; - -#define FIEMAP_MAX_OFFSET (~0ULL) - -#define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */ -#define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */ - -#define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR) - -#define FIEMAP_EXTENT_LAST 0x00000001 /* Last extent in file. */ -#define FIEMAP_EXTENT_UNKNOWN 0x00000002 /* Data location unknown. */ -#define FIEMAP_EXTENT_DELALLOC 0x00000004 /* Location still pending. - * Sets EXTENT_UNKNOWN. */ -#define FIEMAP_EXTENT_ENCODED 0x00000008 /* Data can not be read - * while fs is unmounted */ -#define FIEMAP_EXTENT_DATA_ENCRYPTED 0x00000080 /* Data is encrypted by fs. - * Sets EXTENT_NO_BYPASS. */ -#define FIEMAP_EXTENT_NOT_ALIGNED 0x00000100 /* Extent offsets may not be - * block aligned. */ -#define FIEMAP_EXTENT_DATA_INLINE 0x00000200 /* Data mixed with metadata. - * Sets EXTENT_NOT_ALIGNED.*/ -#define FIEMAP_EXTENT_DATA_TAIL 0x00000400 /* Multiple files in block. - * Sets EXTENT_NOT_ALIGNED.*/ -#define FIEMAP_EXTENT_UNWRITTEN 0x00000800 /* Space allocated, but - * no data (i.e. zero). */ -#define FIEMAP_EXTENT_MERGED 0x00001000 /* File does not natively - * support extents. Result - * merged for efficiency. */ -#define FIEMAP_EXTENT_SHARED 0x00002000 /* Space shared with other - * files. */ - -#endif /* _LINUX_FIEMAP_H */ diff --git a/include/linux/filter.h b/include/linux/filter.h index 2ded090e10f4..24d251f3bab0 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1,141 +1,12 @@ /* * Linux Socket Filter Data Structures */ - #ifndef __LINUX_FILTER_H__ #define __LINUX_FILTER_H__ -#include -#include - -#ifdef __KERNEL__ #include #include -#endif - -/* - * Current version of the filter code architecture. - */ -#define BPF_MAJOR_VERSION 1 -#define BPF_MINOR_VERSION 1 - -/* - * Try and keep these values and structures similar to BSD, especially - * the BPF code definitions which need to match so you can share filters - */ - -struct sock_filter { /* Filter block */ - __u16 code; /* Actual filter code */ - __u8 jt; /* Jump true */ - __u8 jf; /* Jump false */ - __u32 k; /* Generic multiuse field */ -}; - -struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ - unsigned short len; /* Number of filter blocks */ - struct sock_filter __user *filter; -}; - -/* - * Instruction classes - */ - -#define BPF_CLASS(code) ((code) & 0x07) -#define BPF_LD 0x00 -#define BPF_LDX 0x01 -#define BPF_ST 0x02 -#define BPF_STX 0x03 -#define BPF_ALU 0x04 -#define BPF_JMP 0x05 -#define BPF_RET 0x06 -#define BPF_MISC 0x07 - -/* ld/ldx fields */ -#define BPF_SIZE(code) ((code) & 0x18) -#define BPF_W 0x00 -#define BPF_H 0x08 -#define BPF_B 0x10 -#define BPF_MODE(code) ((code) & 0xe0) -#define BPF_IMM 0x00 -#define BPF_ABS 0x20 -#define BPF_IND 0x40 -#define BPF_MEM 0x60 -#define BPF_LEN 0x80 -#define BPF_MSH 0xa0 - -/* alu/jmp fields */ -#define BPF_OP(code) ((code) & 0xf0) -#define BPF_ADD 0x00 -#define BPF_SUB 0x10 -#define BPF_MUL 0x20 -#define BPF_DIV 0x30 -#define BPF_OR 0x40 -#define BPF_AND 0x50 -#define BPF_LSH 0x60 -#define BPF_RSH 0x70 -#define BPF_NEG 0x80 -#define BPF_MOD 0x90 -#define BPF_XOR 0xa0 - -#define BPF_JA 0x00 -#define BPF_JEQ 0x10 -#define BPF_JGT 0x20 -#define BPF_JGE 0x30 -#define BPF_JSET 0x40 -#define BPF_SRC(code) ((code) & 0x08) -#define BPF_K 0x00 -#define BPF_X 0x08 - -/* ret - BPF_K and BPF_X also apply */ -#define BPF_RVAL(code) ((code) & 0x18) -#define BPF_A 0x10 - -/* misc */ -#define BPF_MISCOP(code) ((code) & 0xf8) -#define BPF_TAX 0x00 -#define BPF_TXA 0x80 - -#ifndef BPF_MAXINSNS -#define BPF_MAXINSNS 4096 -#endif - -/* - * Macros for filter block array initializers. - */ -#ifndef BPF_STMT -#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } -#endif -#ifndef BPF_JUMP -#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } -#endif - -/* - * Number of scratch memory words for: BPF_ST and BPF_STX - */ -#define BPF_MEMWORDS 16 - -/* RATIONALE. Negative offsets are invalid in BPF. - We use them to reference ancillary data. - Unlike introduction new instructions, it does not break - existing compilers/optimizers. - */ -#define SKF_AD_OFF (-0x1000) -#define SKF_AD_PROTOCOL 0 -#define SKF_AD_PKTTYPE 4 -#define SKF_AD_IFINDEX 8 -#define SKF_AD_NLATTR 12 -#define SKF_AD_NLATTR_NEST 16 -#define SKF_AD_MARK 20 -#define SKF_AD_QUEUE 24 -#define SKF_AD_HATYPE 28 -#define SKF_AD_RXHASH 32 -#define SKF_AD_CPU 36 -#define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 -#define SKF_NET_OFF (-0x100000) -#define SKF_LL_OFF (-0x200000) - -#ifdef __KERNEL__ +#include #ifdef CONFIG_COMPAT /* @@ -254,6 +125,4 @@ enum { BPF_S_ANC_SECCOMP_LD_W, }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h deleted file mode 100644 index d50036953497..000000000000 --- a/include/linux/firewire-cdev.h +++ /dev/null @@ -1,1039 +0,0 @@ -/* - * Char device interface. - * - * Copyright (C) 2005-2007 Kristian Hoegsberg - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -#ifndef _LINUX_FIREWIRE_CDEV_H -#define _LINUX_FIREWIRE_CDEV_H - -#include -#include -#include - -/* available since kernel version 2.6.22 */ -#define FW_CDEV_EVENT_BUS_RESET 0x00 -#define FW_CDEV_EVENT_RESPONSE 0x01 -#define FW_CDEV_EVENT_REQUEST 0x02 -#define FW_CDEV_EVENT_ISO_INTERRUPT 0x03 - -/* available since kernel version 2.6.30 */ -#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04 -#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05 - -/* available since kernel version 2.6.36 */ -#define FW_CDEV_EVENT_REQUEST2 0x06 -#define FW_CDEV_EVENT_PHY_PACKET_SENT 0x07 -#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08 -#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09 - -/** - * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types - * @closure: For arbitrary use by userspace - * @type: Discriminates the fw_cdev_event_ types - * - * This struct may be used to access generic members of all fw_cdev_event_ - * types regardless of the specific type. - * - * Data passed in the @closure field for a request will be returned in the - * corresponding event. It is big enough to hold a pointer on all platforms. - * The ioctl used to set @closure depends on the @type of event. - */ -struct fw_cdev_event_common { - __u64 closure; - __u32 type; -}; - -/** - * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred - * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl - * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET - * @node_id: New node ID of this node - * @local_node_id: Node ID of the local node, i.e. of the controller - * @bm_node_id: Node ID of the bus manager - * @irm_node_id: Node ID of the iso resource manager - * @root_node_id: Node ID of the root node - * @generation: New bus generation - * - * This event is sent when the bus the device belongs to goes through a bus - * reset. It provides information about the new bus configuration, such as - * new node ID for this device, new root ID, and others. - * - * If @bm_node_id is 0xffff right after bus reset it can be reread by an - * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished. - * Kernels with ABI version < 4 do not set @bm_node_id. - */ -struct fw_cdev_event_bus_reset { - __u64 closure; - __u32 type; - __u32 node_id; - __u32 local_node_id; - __u32 bm_node_id; - __u32 irm_node_id; - __u32 root_node_id; - __u32 generation; -}; - -/** - * struct fw_cdev_event_response - Sent when a response packet was received - * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST - * or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST - * or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl - * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE - * @rcode: Response code returned by the remote node - * @length: Data length, i.e. the response's payload size in bytes - * @data: Payload data, if any - * - * This event is sent when the stack receives a response to an outgoing request - * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses - * carrying data (read and lock responses) follows immediately and can be - * accessed through the @data field. - * - * The event is also generated after conclusions of transactions that do not - * involve response packets. This includes unified write transactions, - * broadcast write transactions, and transmission of asynchronous stream - * packets. @rcode indicates success or failure of such transmissions. - */ -struct fw_cdev_event_response { - __u64 closure; - __u32 type; - __u32 rcode; - __u32 length; - __u32 data[0]; -}; - -/** - * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2 - * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST - * - * This event is sent instead of &fw_cdev_event_request2 if the kernel or - * the client implements ABI version <= 3. &fw_cdev_event_request lacks - * essential information; use &fw_cdev_event_request2 instead. - */ -struct fw_cdev_event_request { - __u64 closure; - __u32 type; - __u32 tcode; - __u64 offset; - __u32 handle; - __u32 length; - __u32 data[0]; -}; - -/** - * struct fw_cdev_event_request2 - Sent on incoming request to an address region - * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl - * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2 - * @tcode: Transaction code of the incoming request - * @offset: The offset into the 48-bit per-node address space - * @source_node_id: Sender node ID - * @destination_node_id: Destination node ID - * @card: The index of the card from which the request came - * @generation: Bus generation in which the request is valid - * @handle: Reference to the kernel-side pending request - * @length: Data length, i.e. the request's payload size in bytes - * @data: Incoming data, if any - * - * This event is sent when the stack receives an incoming request to an address - * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is - * guaranteed to be completely contained in the specified region. Userspace is - * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl, - * using the same @handle. - * - * The payload data for requests carrying data (write and lock requests) - * follows immediately and can be accessed through the @data field. - * - * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the - * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT, - * i.e. encodes the extended transaction code. - * - * @card may differ from &fw_cdev_get_info.card because requests are received - * from all cards of the Linux host. @source_node_id, @destination_node_id, and - * @generation pertain to that card. Destination node ID and bus generation may - * therefore differ from the corresponding fields of the last - * &fw_cdev_event_bus_reset. - * - * @destination_node_id may also differ from the current node ID because of a - * non-local bus ID part or in case of a broadcast write request. Note, a - * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a - * broadcast write request; the kernel will then release the kernel-side pending - * request but will not actually send a response packet. - * - * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already - * sent a write response immediately after the request was received; in this - * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to - * release the kernel-side pending request, though another response won't be - * sent. - * - * If the client subsequently needs to initiate requests to the sender node of - * an &fw_cdev_event_request2, it needs to use a device file with matching - * card index, node ID, and generation for outbound requests. - */ -struct fw_cdev_event_request2 { - __u64 closure; - __u32 type; - __u32 tcode; - __u64 offset; - __u32 source_node_id; - __u32 destination_node_id; - __u32 card; - __u32 generation; - __u32 handle; - __u32 length; - __u32 data[0]; -}; - -/** - * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed - * @closure: See &fw_cdev_event_common; - * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl - * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT - * @cycle: Cycle counter of the last completed packet - * @header_length: Total length of following headers, in bytes - * @header: Stripped headers, if any - * - * This event is sent when the controller has completed an &fw_cdev_iso_packet - * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with - * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets - * without the interrupt bit set that the kernel's internal buffer for @header - * is about to overflow. (In the last case, kernels with ABI version < 5 drop - * header data up to the next interrupt packet.) - * - * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): - * - * In version 3 and some implementations of version 2 of the ABI, &header_length - * is a multiple of 4 and &header contains timestamps of all packets up until - * the interrupt packet. The format of the timestamps is as described below for - * isochronous reception. In version 1 of the ABI, &header_length was 0. - * - * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE): - * - * The headers stripped of all packets up until and including the interrupt - * packet are returned in the @header field. The amount of header data per - * packet is as specified at iso context creation by - * &fw_cdev_create_iso_context.header_size. - * - * Hence, _interrupt.header_length / _context.header_size is the number of - * packets received in this interrupt event. The client can now iterate - * through the mmap()'ed DMA buffer according to this number of packets and - * to the buffer sizes as the client specified in &fw_cdev_queue_iso. - * - * Since version 2 of this ABI, the portion for each packet in _interrupt.header - * consists of the 1394 isochronous packet header, followed by a timestamp - * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets - * from the packet payload if &fw_cdev_create_iso_context.header_size > 8. - * - * Format of 1394 iso packet header: 16 bits data_length, 2 bits tag, 6 bits - * channel, 4 bits tcode, 4 bits sy, in big endian byte order. - * data_length is the actual received size of the packet without the four - * 1394 iso packet header bytes. - * - * Format of timestamp: 16 bits invalid, 3 bits cycleSeconds, 13 bits - * cycleCount, in big endian byte order. - * - * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload - * data followed directly after the 1394 is header if header_size > 4. - * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2. - */ -struct fw_cdev_event_iso_interrupt { - __u64 closure; - __u32 type; - __u32 cycle; - __u32 header_length; - __u32 header[0]; -}; - -/** - * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed - * @closure: See &fw_cdev_event_common; - * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl - * @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL - * @completed: Offset into the receive buffer; data before this offset is valid - * - * This event is sent in multichannel contexts (context type - * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer - * chunks that have been completely filled and that have the - * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with - * %FW_CDEV_IOC_FLUSH_ISO. - * - * The buffer is continuously filled with the following data, per packet: - * - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt, - * but in little endian byte order, - * - packet payload (as many bytes as specified in the data_length field of - * the 1394 iso packet header) in big endian byte order, - * - 0...3 padding bytes as needed to align the following trailer quadlet, - * - trailer quadlet, containing the reception timestamp as described at - * &fw_cdev_event_iso_interrupt, but in little endian byte order. - * - * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8. - * When processing the data, stop before a packet that would cross the - * @completed offset. - * - * A packet near the end of a buffer chunk will typically spill over into the - * next queued buffer chunk. It is the responsibility of the client to check - * for this condition, assemble a broken-up packet from its parts, and not to - * re-queue any buffer chunks in which as yet unread packet parts reside. - */ -struct fw_cdev_event_iso_interrupt_mc { - __u64 closure; - __u32 type; - __u32 completed; -}; - -/** - * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed - * @closure: See &fw_cdev_event_common; - * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl - * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or - * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED - * @handle: Reference by which an allocated resource can be deallocated - * @channel: Isochronous channel which was (de)allocated, if any - * @bandwidth: Bandwidth allocation units which were (de)allocated, if any - * - * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous - * resource was allocated at the IRM. The client has to check @channel and - * @bandwidth for whether the allocation actually succeeded. - * - * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous - * resource was deallocated at the IRM. It is also sent when automatic - * reallocation after a bus reset failed. - * - * @channel is <0 if no channel was (de)allocated or if reallocation failed. - * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed. - */ -struct fw_cdev_event_iso_resource { - __u64 closure; - __u32 type; - __u32 handle; - __s32 channel; - __s32 bandwidth; -}; - -/** - * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received - * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET - * or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl - * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED - * @rcode: %RCODE_..., indicates success or failure of transmission - * @length: Data length in bytes - * @data: Incoming data - * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty, - * except in case of a ping packet: Then, @length is 4, and @data[0] is the - * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE. - * - * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data - * consists of the two PHY packet quadlets, in host byte order. - */ -struct fw_cdev_event_phy_packet { - __u64 closure; - __u32 type; - __u32 rcode; - __u32 length; - __u32 data[0]; -}; - -/** - * union fw_cdev_event - Convenience union of fw_cdev_event_ types - * @common: Valid for all types - * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET - * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE - * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST - * @request2: Valid if @common.type == %FW_CDEV_EVENT_REQUEST2 - * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT - * @iso_interrupt_mc: Valid if @common.type == - * %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL - * @iso_resource: Valid if @common.type == - * %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or - * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED - * @phy_packet: Valid if @common.type == - * %FW_CDEV_EVENT_PHY_PACKET_SENT or - * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED - * - * Convenience union for userspace use. Events could be read(2) into an - * appropriately aligned char buffer and then cast to this union for further - * processing. Note that for a request, response or iso_interrupt event, - * the data[] or header[] may make the size of the full event larger than - * sizeof(union fw_cdev_event). Also note that if you attempt to read(2) - * an event into a buffer that is not large enough for it, the data that does - * not fit will be discarded so that the next read(2) will return a new event. - */ -union fw_cdev_event { - struct fw_cdev_event_common common; - struct fw_cdev_event_bus_reset bus_reset; - struct fw_cdev_event_response response; - struct fw_cdev_event_request request; - struct fw_cdev_event_request2 request2; /* added in 2.6.36 */ - struct fw_cdev_event_iso_interrupt iso_interrupt; - struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */ - struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */ - struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */ -}; - -/* available since kernel version 2.6.22 */ -#define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info) -#define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request) -#define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate) -#define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate) -#define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response) -#define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset) -#define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor) -#define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor) -#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context) -#define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso) -#define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso) -#define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso) - -/* available since kernel version 2.6.24 */ -#define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer) - -/* available since kernel version 2.6.30 */ -#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource) -#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE _IOW('#', 0x0e, struct fw_cdev_deallocate) -#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource) -#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource) -#define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */ -#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request) -#define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet) - -/* available since kernel version 2.6.34 */ -#define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2) - -/* available since kernel version 2.6.36 */ -#define FW_CDEV_IOC_SEND_PHY_PACKET _IOWR('#', 0x15, struct fw_cdev_send_phy_packet) -#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets) -#define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels) - -/* available since kernel version 3.4 */ -#define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso) - -/* - * ABI version history - * 1 (2.6.22) - initial version - * (2.6.24) - added %FW_CDEV_IOC_GET_CYCLE_TIMER - * 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if - * &fw_cdev_create_iso_context.header_size is 8 or more - * - added %FW_CDEV_IOC_*_ISO_RESOURCE*, - * %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST, - * %FW_CDEV_IOC_SEND_STREAM_PACKET - * (2.6.32) - added time stamp to xmit &fw_cdev_event_iso_interrupt - * (2.6.33) - IR has always packet-per-buffer semantics now, not one of - * dual-buffer or packet-per-buffer depending on hardware - * - shared use and auto-response for FCP registers - * 3 (2.6.34) - made &fw_cdev_get_cycle_timer reliable - * - added %FW_CDEV_IOC_GET_CYCLE_TIMER2 - * 4 (2.6.36) - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*, - * and &fw_cdev_allocate.region_end - * - implemented &fw_cdev_event_bus_reset.bm_node_id - * - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS - * - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL, - * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and - * %FW_CDEV_IOC_SET_ISO_CHANNELS - * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to - * avoid dropping data - * - added %FW_CDEV_IOC_FLUSH_ISO - */ - -/** - * struct fw_cdev_get_info - General purpose information ioctl - * @version: The version field is just a running serial number. Both an - * input parameter (ABI version implemented by the client) and - * output parameter (ABI version implemented by the kernel). - * A client shall fill in the ABI @version for which the client - * was implemented. This is necessary for forward compatibility. - * @rom_length: If @rom is non-zero, up to @rom_length bytes of Configuration - * ROM will be copied into that user space address. In either - * case, @rom_length is updated with the actual length of the - * Configuration ROM. - * @rom: If non-zero, address of a buffer to be filled by a copy of the - * device's Configuration ROM - * @bus_reset: If non-zero, address of a buffer to be filled by a - * &struct fw_cdev_event_bus_reset with the current state - * of the bus. This does not cause a bus reset to happen. - * @bus_reset_closure: Value of &closure in this and subsequent bus reset events - * @card: The index of the card this device belongs to - * - * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client - * performs right after it opened a /dev/fw* file. - * - * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2) - * is started by this ioctl. - */ -struct fw_cdev_get_info { - __u32 version; - __u32 rom_length; - __u64 rom; - __u64 bus_reset; - __u64 bus_reset_closure; - __u32 card; -}; - -/** - * struct fw_cdev_send_request - Send an asynchronous request packet - * @tcode: Transaction code of the request - * @length: Length of outgoing payload, in bytes - * @offset: 48-bit offset at destination node - * @closure: Passed back to userspace in the response event - * @data: Userspace pointer to payload - * @generation: The bus generation where packet is valid - * - * Send a request to the device. This ioctl implements all outgoing requests. - * Both quadlet and block request specify the payload as a pointer to the data - * in the @data field. Once the transaction completes, the kernel writes an - * &fw_cdev_event_response event back. The @closure field is passed back to - * user space in the response event. - */ -struct fw_cdev_send_request { - __u32 tcode; - __u32 length; - __u64 offset; - __u64 closure; - __u64 data; - __u32 generation; -}; - -/** - * struct fw_cdev_send_response - Send an asynchronous response packet - * @rcode: Response code as determined by the userspace handler - * @length: Length of outgoing payload, in bytes - * @data: Userspace pointer to payload - * @handle: The handle from the &fw_cdev_event_request - * - * Send a response to an incoming request. By setting up an address range using - * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An - * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must - * send a reply using this ioctl. The event has a handle to the kernel-side - * pending transaction, which should be used with this ioctl. - */ -struct fw_cdev_send_response { - __u32 rcode; - __u32 length; - __u64 data; - __u32 handle; -}; - -/** - * struct fw_cdev_allocate - Allocate a CSR in an address range - * @offset: Start offset of the address range - * @closure: To be passed back to userspace in request events - * @length: Length of the CSR, in bytes - * @handle: Handle to the allocation, written by the kernel - * @region_end: First address above the address range (added in ABI v4, 2.6.36) - * - * Allocate an address range in the 48-bit address space on the local node - * (the controller). This allows userspace to listen for requests with an - * offset within that address range. Every time when the kernel receives a - * request within the range, an &fw_cdev_event_request2 event will be emitted. - * (If the kernel or the client implements ABI version <= 3, an - * &fw_cdev_event_request will be generated instead.) - * - * The @closure field is passed back to userspace in these request events. - * The @handle field is an out parameter, returning a handle to the allocated - * range to be used for later deallocation of the range. - * - * The address range is allocated on all local nodes. The address allocation - * is exclusive except for the FCP command and response registers. If an - * exclusive address region is already in use, the ioctl fails with errno set - * to %EBUSY. - * - * If kernel and client implement ABI version >= 4, the kernel looks up a free - * spot of size @length inside [@offset..@region_end) and, if found, writes - * the start address of the new CSR back in @offset. I.e. @offset is an - * in and out parameter. If this automatic placement of a CSR in a bigger - * address range is not desired, the client simply needs to set @region_end - * = @offset + @length. - * - * If the kernel or the client implements ABI version <= 3, @region_end is - * ignored and effectively assumed to be @offset + @length. - * - * @region_end is only present in a kernel header >= 2.6.36. If necessary, - * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2. - */ -struct fw_cdev_allocate { - __u64 offset; - __u64 closure; - __u32 length; - __u32 handle; - __u64 region_end; /* available since kernel version 2.6.36 */ -}; - -/** - * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource - * @handle: Handle to the address range or iso resource, as returned by the - * kernel when the range or resource was allocated - */ -struct fw_cdev_deallocate { - __u32 handle; -}; - -#define FW_CDEV_LONG_RESET 0 -#define FW_CDEV_SHORT_RESET 1 - -/** - * struct fw_cdev_initiate_bus_reset - Initiate a bus reset - * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET - * - * Initiate a bus reset for the bus this device is on. The bus reset can be - * either the original (long) bus reset or the arbitrated (short) bus reset - * introduced in 1394a-2000. - * - * The ioctl returns immediately. A subsequent &fw_cdev_event_bus_reset - * indicates when the reset actually happened. Since ABI v4, this may be - * considerably later than the ioctl because the kernel ensures a grace period - * between subsequent bus resets as per IEEE 1394 bus management specification. - */ -struct fw_cdev_initiate_bus_reset { - __u32 type; -}; - -/** - * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM - * @immediate: If non-zero, immediate key to insert before pointer - * @key: Upper 8 bits of root directory pointer - * @data: Userspace pointer to contents of descriptor block - * @length: Length of descriptor block data, in quadlets - * @handle: Handle to the descriptor, written by the kernel - * - * Add a descriptor block and optionally a preceding immediate key to the local - * node's Configuration ROM. - * - * The @key field specifies the upper 8 bits of the descriptor root directory - * pointer and the @data and @length fields specify the contents. The @key - * should be of the form 0xXX000000. The offset part of the root directory entry - * will be filled in by the kernel. - * - * If not 0, the @immediate field specifies an immediate key which will be - * inserted before the root directory pointer. - * - * @immediate, @key, and @data array elements are CPU-endian quadlets. - * - * If successful, the kernel adds the descriptor and writes back a @handle to - * the kernel-side object to be used for later removal of the descriptor block - * and immediate key. The kernel will also generate a bus reset to signal the - * change of the Configuration ROM to other nodes. - * - * This ioctl affects the Configuration ROMs of all local nodes. - * The ioctl only succeeds on device files which represent a local node. - */ -struct fw_cdev_add_descriptor { - __u32 immediate; - __u32 key; - __u64 data; - __u32 length; - __u32 handle; -}; - -/** - * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM - * @handle: Handle to the descriptor, as returned by the kernel when the - * descriptor was added - * - * Remove a descriptor block and accompanying immediate key from the local - * nodes' Configuration ROMs. The kernel will also generate a bus reset to - * signal the change of the Configuration ROM to other nodes. - */ -struct fw_cdev_remove_descriptor { - __u32 handle; -}; - -#define FW_CDEV_ISO_CONTEXT_TRANSMIT 0 -#define FW_CDEV_ISO_CONTEXT_RECEIVE 1 -#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL 2 /* added in 2.6.36 */ - -/** - * struct fw_cdev_create_iso_context - Create a context for isochronous I/O - * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or - * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL - * @header_size: Header size to strip in single-channel reception - * @channel: Channel to bind to in single-channel reception or transmission - * @speed: Transmission speed - * @closure: To be returned in &fw_cdev_event_iso_interrupt or - * &fw_cdev_event_iso_interrupt_multichannel - * @handle: Handle to context, written back by kernel - * - * Prior to sending or receiving isochronous I/O, a context must be created. - * The context records information about the transmit or receive configuration - * and typically maps to an underlying hardware resource. A context is set up - * for either sending or receiving. It is bound to a specific isochronous - * @channel. - * - * In case of multichannel reception, @header_size and @channel are ignored - * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS. - * - * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4 - * and must be a multiple of 4. It is ignored in other context types. - * - * @speed is ignored in receive context types. - * - * If a context was successfully created, the kernel writes back a handle to the - * context, which must be passed in for subsequent operations on that context. - * - * Limitations: - * No more than one iso context can be created per fd. - * The total number of contexts that all userspace and kernelspace drivers can - * create on a card at a time is a hardware limit, typically 4 or 8 contexts per - * direction, and of them at most one multichannel receive context. - */ -struct fw_cdev_create_iso_context { - __u32 type; - __u32 header_size; - __u32 channel; - __u32 speed; - __u64 closure; - __u32 handle; -}; - -/** - * struct fw_cdev_set_iso_channels - Select channels in multichannel reception - * @channels: Bitmask of channels to listen to - * @handle: Handle of the mutichannel receive context - * - * @channels is the bitwise or of 1ULL << n for each channel n to listen to. - * - * The ioctl fails with errno %EBUSY if there is already another receive context - * on a channel in @channels. In that case, the bitmask of all unoccupied - * channels is returned in @channels. - */ -struct fw_cdev_set_iso_channels { - __u64 channels; - __u32 handle; -}; - -#define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v) -#define FW_CDEV_ISO_INTERRUPT (1 << 16) -#define FW_CDEV_ISO_SKIP (1 << 17) -#define FW_CDEV_ISO_SYNC (1 << 17) -#define FW_CDEV_ISO_TAG(v) ((v) << 18) -#define FW_CDEV_ISO_SY(v) ((v) << 20) -#define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24) - -/** - * struct fw_cdev_iso_packet - Isochronous packet - * @control: Contains the header length (8 uppermost bits), - * the sy field (4 bits), the tag field (2 bits), a sync flag - * or a skip flag (1 bit), an interrupt flag (1 bit), and the - * payload length (16 lowermost bits) - * @header: Header and payload in case of a transmit context. - * - * &struct fw_cdev_iso_packet is used to describe isochronous packet queues. - * Use the FW_CDEV_ISO_ macros to fill in @control. - * The @header array is empty in case of receive contexts. - * - * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT: - * - * @control.HEADER_LENGTH must be a multiple of 4. It specifies the numbers of - * bytes in @header that will be prepended to the packet's payload. These bytes - * are copied into the kernel and will not be accessed after the ioctl has - * returned. - * - * The @control.SY and TAG fields are copied to the iso packet header. These - * fields are specified by IEEE 1394a and IEC 61883-1. - * - * The @control.SKIP flag specifies that no packet is to be sent in a frame. - * When using this, all other fields except @control.INTERRUPT must be zero. - * - * When a packet with the @control.INTERRUPT flag set has been completed, an - * &fw_cdev_event_iso_interrupt event will be sent. - * - * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE: - * - * @control.HEADER_LENGTH must be a multiple of the context's header_size. - * If the HEADER_LENGTH is larger than the context's header_size, multiple - * packets are queued for this entry. - * - * The @control.SY and TAG fields are ignored. - * - * If the @control.SYNC flag is set, the context drops all packets until a - * packet with a sy field is received which matches &fw_cdev_start_iso.sync. - * - * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for - * one packet (in addition to payload quadlets that have been defined as headers - * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure). - * If more bytes are received, the additional bytes are dropped. If less bytes - * are received, the remaining bytes in this part of the payload buffer will not - * be written to, not even by the next packet. I.e., packets received in - * consecutive frames will not necessarily be consecutive in memory. If an - * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally - * among them. - * - * When a packet with the @control.INTERRUPT flag set has been completed, an - * &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued - * multiple receive packets is completed when its last packet is completed. - * - * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL: - * - * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since - * it specifies a chunk of the mmap()'ed buffer, while the number and alignment - * of packets to be placed into the buffer chunk is not known beforehand. - * - * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room - * for header, payload, padding, and trailer bytes of one or more packets. - * It must be a multiple of 4. - * - * @control.HEADER_LENGTH, TAG and SY are ignored. SYNC is treated as described - * for single-channel reception. - * - * When a buffer chunk with the @control.INTERRUPT flag set has been filled - * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent. - */ -struct fw_cdev_iso_packet { - __u32 control; - __u32 header[0]; -}; - -/** - * struct fw_cdev_queue_iso - Queue isochronous packets for I/O - * @packets: Userspace pointer to an array of &fw_cdev_iso_packet - * @data: Pointer into mmap()'ed payload buffer - * @size: Size of the @packets array, in bytes - * @handle: Isochronous context handle - * - * Queue a number of isochronous packets for reception or transmission. - * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs, - * which describe how to transmit from or receive into a contiguous region - * of a mmap()'ed payload buffer. As part of transmit packet descriptors, - * a series of headers can be supplied, which will be prepended to the - * payload during DMA. - * - * The kernel may or may not queue all packets, but will write back updated - * values of the @packets, @data and @size fields, so the ioctl can be - * resubmitted easily. - * - * In case of a multichannel receive context, @data must be quadlet-aligned - * relative to the buffer start. - */ -struct fw_cdev_queue_iso { - __u64 packets; - __u64 data; - __u32 size; - __u32 handle; -}; - -#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1 -#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2 -#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4 -#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8 -#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15 - -/** - * struct fw_cdev_start_iso - Start an isochronous transmission or reception - * @cycle: Cycle in which to start I/O. If @cycle is greater than or - * equal to 0, the I/O will start on that cycle. - * @sync: Determines the value to wait for for receive packets that have - * the %FW_CDEV_ISO_SYNC bit set - * @tags: Tag filter bit mask. Only valid for isochronous reception. - * Determines the tag values for which packets will be accepted. - * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags. - * @handle: Isochronous context handle within which to transmit or receive - */ -struct fw_cdev_start_iso { - __s32 cycle; - __u32 sync; - __u32 tags; - __u32 handle; -}; - -/** - * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception - * @handle: Handle of isochronous context to stop - */ -struct fw_cdev_stop_iso { - __u32 handle; -}; - -/** - * struct fw_cdev_flush_iso - flush completed iso packets - * @handle: handle of isochronous context to flush - * - * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, - * report any completed packets. - * - * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current - * offset in the receive buffer, if it has changed; this is typically in the - * middle of some buffer chunk. - * - * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL - * events generated by this ioctl are sent synchronously, i.e., are available - * for reading from the file descriptor when this ioctl returns. - */ -struct fw_cdev_flush_iso { - __u32 handle; -}; - -/** - * struct fw_cdev_get_cycle_timer - read cycle timer register - * @local_time: system time, in microseconds since the Epoch - * @cycle_timer: Cycle Time register contents - * - * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME - * and only with microseconds resolution. - * - * In version 1 and 2 of the ABI, this ioctl returned unreliable (non- - * monotonic) @cycle_timer values on certain controllers. - */ -struct fw_cdev_get_cycle_timer { - __u64 local_time; - __u32 cycle_timer; -}; - -/** - * struct fw_cdev_get_cycle_timer2 - read cycle timer register - * @tv_sec: system time, seconds - * @tv_nsec: system time, sub-seconds part in nanoseconds - * @clk_id: input parameter, clock from which to get the system time - * @cycle_timer: Cycle Time register contents - * - * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer - * and also the system clock. This allows to correlate reception time of - * isochronous packets with system time. - * - * @clk_id lets you choose a clock like with POSIX' clock_gettime function. - * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC - * and Linux' %CLOCK_MONOTONIC_RAW. - * - * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and - * 12 bits cycleOffset, in host byte order. Cf. the Cycle Time register - * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394. - */ -struct fw_cdev_get_cycle_timer2 { - __s64 tv_sec; - __s32 tv_nsec; - __s32 clk_id; - __u32 cycle_timer; -}; - -/** - * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth - * @closure: Passed back to userspace in corresponding iso resource events - * @channels: Isochronous channels of which one is to be (de)allocated - * @bandwidth: Isochronous bandwidth units to be (de)allocated - * @handle: Handle to the allocation, written by the kernel (only valid in - * case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls) - * - * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an - * isochronous channel and/or of isochronous bandwidth at the isochronous - * resource manager (IRM). Only one of the channels specified in @channels is - * allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after - * communication with the IRM, indicating success or failure in the event data. - * The kernel will automatically reallocate the resources after bus resets. - * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event - * will be sent. The kernel will also automatically deallocate the resources - * when the file descriptor is closed. - * - * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate - * deallocation of resources which were allocated as described above. - * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation. - * - * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation - * without automatic re- or deallocation. - * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation, - * indicating success or failure in its data. - * - * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like - * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed - * instead of allocated. - * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation. - * - * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources - * for the lifetime of the fd or @handle. - * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources - * for the duration of a bus generation. - * - * @channels is a host-endian bitfield with the least significant bit - * representing channel 0 and the most significant bit representing channel 63: - * 1ULL << c for each channel c that is a candidate for (de)allocation. - * - * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send - * one quadlet of data (payload or header data) at speed S1600. - */ -struct fw_cdev_allocate_iso_resource { - __u64 closure; - __u64 channels; - __u32 bandwidth; - __u32 handle; -}; - -/** - * struct fw_cdev_send_stream_packet - send an asynchronous stream packet - * @length: Length of outgoing payload, in bytes - * @tag: Data format tag - * @channel: Isochronous channel to transmit to - * @sy: Synchronization code - * @closure: Passed back to userspace in the response event - * @data: Userspace pointer to payload - * @generation: The bus generation where packet is valid - * @speed: Speed to transmit at - * - * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet - * to every device which is listening to the specified channel. The kernel - * writes an &fw_cdev_event_response event which indicates success or failure of - * the transmission. - */ -struct fw_cdev_send_stream_packet { - __u32 length; - __u32 tag; - __u32 channel; - __u32 sy; - __u64 closure; - __u64 data; - __u32 generation; - __u32 speed; -}; - -/** - * struct fw_cdev_send_phy_packet - send a PHY packet - * @closure: Passed back to userspace in the PHY-packet-sent event - * @data: First and second quadlet of the PHY packet - * @generation: The bus generation where packet is valid - * - * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes - * on the same card as this device. After transmission, an - * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated. - * - * The payload @data[] shall be specified in host byte order. Usually, - * @data[1] needs to be the bitwise inverse of @data[0]. VersaPHY packets - * are an exception to this rule. - * - * The ioctl is only permitted on device files which represent a local node. - */ -struct fw_cdev_send_phy_packet { - __u64 closure; - __u32 data[2]; - __u32 generation; -}; - -/** - * struct fw_cdev_receive_phy_packets - start reception of PHY packets - * @closure: Passed back to userspace in phy packet events - * - * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to - * incoming PHY packets from any node on the same bus as the device. - * - * The ioctl is only permitted on device files which represent a local node. - */ -struct fw_cdev_receive_phy_packets { - __u64 closure; -}; - -#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */ - -#endif /* _LINUX_FIREWIRE_CDEV_H */ diff --git a/include/linux/firewire-constants.h b/include/linux/firewire-constants.h deleted file mode 100644 index 9b4bb5fbba4b..000000000000 --- a/include/linux/firewire-constants.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * IEEE 1394 constants. - * - * Copyright (C) 2005-2007 Kristian Hoegsberg - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -#ifndef _LINUX_FIREWIRE_CONSTANTS_H -#define _LINUX_FIREWIRE_CONSTANTS_H - -#define TCODE_WRITE_QUADLET_REQUEST 0x0 -#define TCODE_WRITE_BLOCK_REQUEST 0x1 -#define TCODE_WRITE_RESPONSE 0x2 -#define TCODE_READ_QUADLET_REQUEST 0x4 -#define TCODE_READ_BLOCK_REQUEST 0x5 -#define TCODE_READ_QUADLET_RESPONSE 0x6 -#define TCODE_READ_BLOCK_RESPONSE 0x7 -#define TCODE_CYCLE_START 0x8 -#define TCODE_LOCK_REQUEST 0x9 -#define TCODE_STREAM_DATA 0xa -#define TCODE_LOCK_RESPONSE 0xb - -#define EXTCODE_MASK_SWAP 0x1 -#define EXTCODE_COMPARE_SWAP 0x2 -#define EXTCODE_FETCH_ADD 0x3 -#define EXTCODE_LITTLE_ADD 0x4 -#define EXTCODE_BOUNDED_ADD 0x5 -#define EXTCODE_WRAP_ADD 0x6 -#define EXTCODE_VENDOR_DEPENDENT 0x7 - -/* Linux firewire-core (Juju) specific tcodes */ -#define TCODE_LOCK_MASK_SWAP (0x10 | EXTCODE_MASK_SWAP) -#define TCODE_LOCK_COMPARE_SWAP (0x10 | EXTCODE_COMPARE_SWAP) -#define TCODE_LOCK_FETCH_ADD (0x10 | EXTCODE_FETCH_ADD) -#define TCODE_LOCK_LITTLE_ADD (0x10 | EXTCODE_LITTLE_ADD) -#define TCODE_LOCK_BOUNDED_ADD (0x10 | EXTCODE_BOUNDED_ADD) -#define TCODE_LOCK_WRAP_ADD (0x10 | EXTCODE_WRAP_ADD) -#define TCODE_LOCK_VENDOR_DEPENDENT (0x10 | EXTCODE_VENDOR_DEPENDENT) - -#define RCODE_COMPLETE 0x0 -#define RCODE_CONFLICT_ERROR 0x4 -#define RCODE_DATA_ERROR 0x5 -#define RCODE_TYPE_ERROR 0x6 -#define RCODE_ADDRESS_ERROR 0x7 - -/* Linux firewire-core (Juju) specific rcodes */ -#define RCODE_SEND_ERROR 0x10 -#define RCODE_CANCELLED 0x11 -#define RCODE_BUSY 0x12 -#define RCODE_GENERATION 0x13 -#define RCODE_NO_ACK 0x14 - -#define SCODE_100 0x0 -#define SCODE_200 0x1 -#define SCODE_400 0x2 -#define SCODE_800 0x3 -#define SCODE_1600 0x4 -#define SCODE_3200 0x5 -#define SCODE_BETA 0x3 - -#define ACK_COMPLETE 0x1 -#define ACK_PENDING 0x2 -#define ACK_BUSY_X 0x4 -#define ACK_BUSY_A 0x5 -#define ACK_BUSY_B 0x6 -#define ACK_DATA_ERROR 0xd -#define ACK_TYPE_ERROR 0xe - -#define RETRY_1 0x00 -#define RETRY_X 0x01 -#define RETRY_A 0x02 -#define RETRY_B 0x03 - -#endif /* _LINUX_FIREWIRE_CONSTANTS_H */ diff --git a/include/linux/flat.h b/include/linux/flat.h index ec56852e2659..2c1eb15c4ba4 100644 --- a/include/linux/flat.h +++ b/include/linux/flat.h @@ -6,58 +6,12 @@ * This file provides the definitions and structures needed to * support uClinux flat-format executables. */ - #ifndef _LINUX_FLAT_H #define _LINUX_FLAT_H -#ifdef __KERNEL__ #include -#endif - -#define FLAT_VERSION 0x00000004L - -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else -#define MAX_SHARED_LIBS (1) -#endif - -/* - * To make everything easier to port and manage cross platform - * development, all fields are in network byte order. - */ +#include -struct flat_hdr { - char magic[4]; - unsigned long rev; /* version (as above) */ - unsigned long entry; /* Offset of first executable instruction - with text segment from beginning of file */ - unsigned long data_start; /* Offset of data segment from beginning of - file */ - unsigned long data_end; /* Offset of end of data segment - from beginning of file */ - unsigned long bss_end; /* Offset of end of bss segment from beginning - of file */ - - /* (It is assumed that data_end through bss_end forms the bss segment.) */ - - unsigned long stack_size; /* Size of stack, in bytes */ - unsigned long reloc_start; /* Offset of relocation records from - beginning of file */ - unsigned long reloc_count; /* Number of relocation records */ - unsigned long flags; - unsigned long build_date; /* When the program/library was built */ - unsigned long filler[5]; /* Reservered, set to zero */ -}; - -#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */ -#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */ -#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */ -#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */ -#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */ - - -#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */ /* * While it would be nice to keep this header clean, users of older * tools still need this support in the kernel. So this section is @@ -95,6 +49,4 @@ typedef union { } reloc; } flat_v2_reloc_t; -#endif /* __KERNEL__ */ - #endif /* _LINUX_FLAT_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 8cb86cfc9719..001c7cff2d48 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1,337 +1,6 @@ #ifndef _LINUX_FS_H #define _LINUX_FS_H -/* - * This file has definitions for some important file table - * structures etc. - */ - -#include -#include -#include - -/* - * It's silly to have NR_OPEN bigger than NR_FILE, but you can change - * the file limit at runtime and only root can increase the per-process - * nr_file rlimit, so it's safe to set up a ridiculously high absolute - * upper limit on files-per-process. - * - * Some programs (notably those using select()) may have to be - * recompiled to take full advantage of the new limits.. - */ - -/* Fixed constants first: */ -#undef NR_OPEN -#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ -#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ - -#define BLOCK_SIZE_BITS 10 -#define BLOCK_SIZE (1<i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - -/* the read-only stuff doesn't really belong here, but any other place is - probably as bad and I don't want to create yet another include file. */ - -#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ -#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ -#define BLKRRPART _IO(0x12,95) /* re-read partition table */ -#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ -#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ -#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ -#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ -#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ -#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ -#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ -#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ -#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ -#if 0 -#define BLKPG _IO(0x12,105)/* See blkpg.h */ - -/* Some people are morons. Do not use sizeof! */ - -#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ -#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ -/* This was here just to show that the number is taken - - probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ -#endif -/* A jump here: 108-111 have been used for various private purposes. */ -#define BLKBSZGET _IOR(0x12,112,size_t) -#define BLKBSZSET _IOW(0x12,113,size_t) -#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ -#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) -#define BLKTRACESTART _IO(0x12,116) -#define BLKTRACESTOP _IO(0x12,117) -#define BLKTRACETEARDOWN _IO(0x12,118) -#define BLKDISCARD _IO(0x12,119) -#define BLKIOMIN _IO(0x12,120) -#define BLKIOOPT _IO(0x12,121) -#define BLKALIGNOFF _IO(0x12,122) -#define BLKPBSZGET _IO(0x12,123) -#define BLKDISCARDZEROES _IO(0x12,124) -#define BLKSECDISCARD _IO(0x12,125) -#define BLKROTATIONAL _IO(0x12,126) -#define BLKZEROOUT _IO(0x12,127) - -#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ -#define FIBMAP _IO(0x00,1) /* bmap access */ -#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ -#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ -#define FITHAW _IOWR('X', 120, int) /* Thaw */ -#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ - -#define FS_IOC_GETFLAGS _IOR('f', 1, long) -#define FS_IOC_SETFLAGS _IOW('f', 2, long) -#define FS_IOC_GETVERSION _IOR('v', 1, long) -#define FS_IOC_SETVERSION _IOW('v', 2, long) -#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) -#define FS_IOC32_GETFLAGS _IOR('f', 1, int) -#define FS_IOC32_SETFLAGS _IOW('f', 2, int) -#define FS_IOC32_GETVERSION _IOR('v', 1, int) -#define FS_IOC32_SETVERSION _IOW('v', 2, int) - -/* - * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) - */ -#define FS_SECRM_FL 0x00000001 /* Secure deletion */ -#define FS_UNRM_FL 0x00000002 /* Undelete */ -#define FS_COMPR_FL 0x00000004 /* Compress file */ -#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ -#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ -#define FS_NODUMP_FL 0x00000040 /* do not dump file */ -#define FS_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define FS_DIRTY_FL 0x00000100 -#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ -#define FS_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define FS_BTREE_FL 0x00001000 /* btree format dir */ -#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ -#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ -#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define FS_EXTENT_FL 0x00080000 /* Extents */ -#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */ -#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ -#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ - -#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - - -#define SYNC_FILE_RANGE_WAIT_BEFORE 1 -#define SYNC_FILE_RANGE_WRITE 2 -#define SYNC_FILE_RANGE_WAIT_AFTER 4 - -#ifdef __KERNEL__ #include #include @@ -360,6 +29,7 @@ struct inodes_stat_t { #include #include +#include struct export_operations; struct hd_geometry; @@ -2876,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode) inode->i_flags |= S_NOSEC; } -#endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h index 1cebaeeeef57..2a707d7fb32c 100644 --- a/include/linux/fsl_hypervisor.h +++ b/include/linux/fsl_hypervisor.h @@ -36,187 +36,11 @@ * also be included by applications that need to communicate with the driver * via the ioctl interface. */ - #ifndef FSL_HYPERVISOR_H #define FSL_HYPERVISOR_H -#include - -/** - * struct fsl_hv_ioctl_restart - restart a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to restart, or -1 for the - * calling partition - * - * Used by FSL_HV_IOCTL_PARTITION_RESTART - */ -struct fsl_hv_ioctl_restart { - __u32 ret; - __u32 partition; -}; +#include -/** - * struct fsl_hv_ioctl_status - get a partition's status - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to query, or -1 for the - * calling partition - * @status: The returned status of the partition - * - * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS - * - * Values of 'status': - * 0 = Stopped - * 1 = Running - * 2 = Starting - * 3 = Stopping - */ -struct fsl_hv_ioctl_status { - __u32 ret; - __u32 partition; - __u32 status; -}; - -/** - * struct fsl_hv_ioctl_start - start a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to control - * @entry_point: The offset within the guest IMA to start execution - * @load: If non-zero, reload the partition's images before starting - * - * Used by FSL_HV_IOCTL_PARTITION_START - */ -struct fsl_hv_ioctl_start { - __u32 ret; - __u32 partition; - __u32 entry_point; - __u32 load; -}; - -/** - * struct fsl_hv_ioctl_stop - stop a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to stop, or -1 for the calling - * partition - * - * Used by FSL_HV_IOCTL_PARTITION_STOP - */ -struct fsl_hv_ioctl_stop { - __u32 ret; - __u32 partition; -}; - -/** - * struct fsl_hv_ioctl_memcpy - copy memory between partitions - * @ret: return error code from the hypervisor - * @source: the partition ID of the source partition, or -1 for this - * partition - * @target: the partition ID of the target partition, or -1 for this - * partition - * @reserved: reserved, must be set to 0 - * @local_addr: user-space virtual address of a buffer in the local - * partition - * @remote_addr: guest physical address of a buffer in the - * remote partition - * @count: the number of bytes to copy. Both the local and remote - * buffers must be at least 'count' bytes long - * - * Used by FSL_HV_IOCTL_MEMCPY - * - * The 'local' partition is the partition that calls this ioctl. The - * 'remote' partition is a different partition. The data is copied from - * the 'source' paritition' to the 'target' partition. - * - * The buffer in the remote partition must be guest physically - * contiguous. - * - * This ioctl does not support copying memory between two remote - * partitions or within the same partition, so either 'source' or - * 'target' (but not both) must be -1. In other words, either - * - * source == local and target == remote - * or - * source == remote and target == local - */ -struct fsl_hv_ioctl_memcpy { - __u32 ret; - __u32 source; - __u32 target; - __u32 reserved; /* padding to ensure local_vaddr is aligned */ - __u64 local_vaddr; - __u64 remote_paddr; - __u64 count; -}; - -/** - * struct fsl_hv_ioctl_doorbell - ring a doorbell - * @ret: return error code from the hypervisor - * @doorbell: the handle of the doorbell to ring doorbell - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_doorbell { - __u32 ret; - __u32 doorbell; -}; - -/** - * struct fsl_hv_ioctl_prop - get/set a device tree property - * @ret: return error code from the hypervisor - * @handle: handle of partition whose tree to access - * @path: virtual address of path name of node to access - * @propname: virtual address of name of property to access - * @propval: virtual address of property data buffer - * @proplen: Size of property data buffer - * @reserved: reserved, must be set to 0 - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_prop { - __u32 ret; - __u32 handle; - __u64 path; - __u64 propname; - __u64 propval; - __u32 proplen; - __u32 reserved; /* padding to ensure structure is aligned */ -}; - -/* The ioctl type, documented in ioctl-number.txt */ -#define FSL_HV_IOCTL_TYPE 0xAF - -/* Restart another partition */ -#define FSL_HV_IOCTL_PARTITION_RESTART \ - _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart) - -/* Get a partition's status */ -#define FSL_HV_IOCTL_PARTITION_GET_STATUS \ - _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status) - -/* Boot another partition */ -#define FSL_HV_IOCTL_PARTITION_START \ - _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start) - -/* Stop this or another partition */ -#define FSL_HV_IOCTL_PARTITION_STOP \ - _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop) - -/* Copy data from one partition to another */ -#define FSL_HV_IOCTL_MEMCPY \ - _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy) - -/* Ring a doorbell */ -#define FSL_HV_IOCTL_DOORBELL \ - _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell) - -/* Get a property from another guest's device tree */ -#define FSL_HV_IOCTL_GETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop) - -/* Set a property in another guest's device tree */ -#define FSL_HV_IOCTL_SETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop) - -#ifdef __KERNEL__ /** * fsl_hv_event_register() - register a callback for failover events @@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb); int fsl_hv_failover_unregister(struct notifier_block *nb); #endif - -#endif diff --git a/include/linux/fuse.h b/include/linux/fuse.h deleted file mode 100644 index d8c713e148e3..000000000000 --- a/include/linux/fuse.h +++ /dev/null @@ -1,677 +0,0 @@ -/* - FUSE: Filesystem in Userspace - Copyright (C) 2001-2008 Miklos Szeredi - - This program can be distributed under the terms of the GNU GPL. - See the file COPYING. -*/ - -/* - * This file defines the kernel interface of FUSE - * - * Protocol changelog: - * - * 7.9: - * - new fuse_getattr_in input argument of GETATTR - * - add lk_flags in fuse_lk_in - * - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in - * - add blksize field to fuse_attr - * - add file flags field to fuse_read_in and fuse_write_in - * - * 7.10 - * - add nonseekable open flag - * - * 7.11 - * - add IOCTL message - * - add unsolicited notification support - * - add POLL message and NOTIFY_POLL notification - * - * 7.12 - * - add umask flag to input argument of open, mknod and mkdir - * - add notification messages for invalidation of inodes and - * directory entries - * - * 7.13 - * - make max number of background requests and congestion threshold - * tunables - * - * 7.14 - * - add splice support to fuse device - * - * 7.15 - * - add store notify - * - add retrieve notify - * - * 7.16 - * - add BATCH_FORGET request - * - FUSE_IOCTL_UNRESTRICTED shall now return with array of 'struct - * fuse_ioctl_iovec' instead of ambiguous 'struct iovec' - * - add FUSE_IOCTL_32BIT flag - * - * 7.17 - * - add FUSE_FLOCK_LOCKS and FUSE_RELEASE_FLOCK_UNLOCK - * - * 7.18 - * - add FUSE_IOCTL_DIR flag - * - add FUSE_NOTIFY_DELETE - * - * 7.19 - * - add FUSE_FALLOCATE - * - * 7.20 - * - add FUSE_AUTO_INVAL_DATA - */ - -#ifndef _LINUX_FUSE_H -#define _LINUX_FUSE_H - -#include - -/* - * Version negotiation: - * - * Both the kernel and userspace send the version they support in the - * INIT request and reply respectively. - * - * If the major versions match then both shall use the smallest - * of the two minor versions for communication. - * - * If the kernel supports a larger major version, then userspace shall - * reply with the major version it supports, ignore the rest of the - * INIT message and expect a new INIT message from the kernel with a - * matching major version. - * - * If the library supports a larger major version, then it shall fall - * back to the major protocol version sent by the kernel for - * communication and reply with that major version (and an arbitrary - * supported minor version). - */ - -/** Version number of this interface */ -#define FUSE_KERNEL_VERSION 7 - -/** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 20 - -/** The node ID of the root inode */ -#define FUSE_ROOT_ID 1 - -/* Make sure all structures are padded to 64bit boundary, so 32bit - userspace works under 64bit kernels */ - -struct fuse_attr { - __u64 ino; - __u64 size; - __u64 blocks; - __u64 atime; - __u64 mtime; - __u64 ctime; - __u32 atimensec; - __u32 mtimensec; - __u32 ctimensec; - __u32 mode; - __u32 nlink; - __u32 uid; - __u32 gid; - __u32 rdev; - __u32 blksize; - __u32 padding; -}; - -struct fuse_kstatfs { - __u64 blocks; - __u64 bfree; - __u64 bavail; - __u64 files; - __u64 ffree; - __u32 bsize; - __u32 namelen; - __u32 frsize; - __u32 padding; - __u32 spare[6]; -}; - -struct fuse_file_lock { - __u64 start; - __u64 end; - __u32 type; - __u32 pid; /* tgid */ -}; - -/** - * Bitmasks for fuse_setattr_in.valid - */ -#define FATTR_MODE (1 << 0) -#define FATTR_UID (1 << 1) -#define FATTR_GID (1 << 2) -#define FATTR_SIZE (1 << 3) -#define FATTR_ATIME (1 << 4) -#define FATTR_MTIME (1 << 5) -#define FATTR_FH (1 << 6) -#define FATTR_ATIME_NOW (1 << 7) -#define FATTR_MTIME_NOW (1 << 8) -#define FATTR_LOCKOWNER (1 << 9) - -/** - * Flags returned by the OPEN request - * - * FOPEN_DIRECT_IO: bypass page cache for this open file - * FOPEN_KEEP_CACHE: don't invalidate the data cache on open - * FOPEN_NONSEEKABLE: the file is not seekable - */ -#define FOPEN_DIRECT_IO (1 << 0) -#define FOPEN_KEEP_CACHE (1 << 1) -#define FOPEN_NONSEEKABLE (1 << 2) - -/** - * INIT request/reply flags - * - * FUSE_ASYNC_READ: asynchronous read requests - * FUSE_POSIX_LOCKS: remote locking for POSIX file locks - * FUSE_FILE_OPS: kernel sends file handle for fstat, etc... (not yet supported) - * FUSE_ATOMIC_O_TRUNC: handles the O_TRUNC open flag in the filesystem - * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." - * FUSE_BIG_WRITES: filesystem can handle write size larger than 4kB - * FUSE_DONT_MASK: don't apply umask to file mode on create operations - * FUSE_SPLICE_WRITE: kernel supports splice write on the device - * FUSE_SPLICE_MOVE: kernel supports splice move on the device - * FUSE_SPLICE_READ: kernel supports splice read on the device - * FUSE_FLOCK_LOCKS: remote locking for BSD style file locks - * FUSE_HAS_IOCTL_DIR: kernel supports ioctl on directories - * FUSE_AUTO_INVAL_DATA: automatically invalidate cached pages - */ -#define FUSE_ASYNC_READ (1 << 0) -#define FUSE_POSIX_LOCKS (1 << 1) -#define FUSE_FILE_OPS (1 << 2) -#define FUSE_ATOMIC_O_TRUNC (1 << 3) -#define FUSE_EXPORT_SUPPORT (1 << 4) -#define FUSE_BIG_WRITES (1 << 5) -#define FUSE_DONT_MASK (1 << 6) -#define FUSE_SPLICE_WRITE (1 << 7) -#define FUSE_SPLICE_MOVE (1 << 8) -#define FUSE_SPLICE_READ (1 << 9) -#define FUSE_FLOCK_LOCKS (1 << 10) -#define FUSE_HAS_IOCTL_DIR (1 << 11) -#define FUSE_AUTO_INVAL_DATA (1 << 12) - -/** - * CUSE INIT request/reply flags - * - * CUSE_UNRESTRICTED_IOCTL: use unrestricted ioctl - */ -#define CUSE_UNRESTRICTED_IOCTL (1 << 0) - -/** - * Release flags - */ -#define FUSE_RELEASE_FLUSH (1 << 0) -#define FUSE_RELEASE_FLOCK_UNLOCK (1 << 1) - -/** - * Getattr flags - */ -#define FUSE_GETATTR_FH (1 << 0) - -/** - * Lock flags - */ -#define FUSE_LK_FLOCK (1 << 0) - -/** - * WRITE flags - * - * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed - * FUSE_WRITE_LOCKOWNER: lock_owner field is valid - */ -#define FUSE_WRITE_CACHE (1 << 0) -#define FUSE_WRITE_LOCKOWNER (1 << 1) - -/** - * Read flags - */ -#define FUSE_READ_LOCKOWNER (1 << 1) - -/** - * Ioctl flags - * - * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine - * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed - * FUSE_IOCTL_RETRY: retry with new iovecs - * FUSE_IOCTL_32BIT: 32bit ioctl - * FUSE_IOCTL_DIR: is a directory - * - * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs - */ -#define FUSE_IOCTL_COMPAT (1 << 0) -#define FUSE_IOCTL_UNRESTRICTED (1 << 1) -#define FUSE_IOCTL_RETRY (1 << 2) -#define FUSE_IOCTL_32BIT (1 << 3) -#define FUSE_IOCTL_DIR (1 << 4) - -#define FUSE_IOCTL_MAX_IOV 256 - -/** - * Poll flags - * - * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify - */ -#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0) - -enum fuse_opcode { - FUSE_LOOKUP = 1, - FUSE_FORGET = 2, /* no reply */ - FUSE_GETATTR = 3, - FUSE_SETATTR = 4, - FUSE_READLINK = 5, - FUSE_SYMLINK = 6, - FUSE_MKNOD = 8, - FUSE_MKDIR = 9, - FUSE_UNLINK = 10, - FUSE_RMDIR = 11, - FUSE_RENAME = 12, - FUSE_LINK = 13, - FUSE_OPEN = 14, - FUSE_READ = 15, - FUSE_WRITE = 16, - FUSE_STATFS = 17, - FUSE_RELEASE = 18, - FUSE_FSYNC = 20, - FUSE_SETXATTR = 21, - FUSE_GETXATTR = 22, - FUSE_LISTXATTR = 23, - FUSE_REMOVEXATTR = 24, - FUSE_FLUSH = 25, - FUSE_INIT = 26, - FUSE_OPENDIR = 27, - FUSE_READDIR = 28, - FUSE_RELEASEDIR = 29, - FUSE_FSYNCDIR = 30, - FUSE_GETLK = 31, - FUSE_SETLK = 32, - FUSE_SETLKW = 33, - FUSE_ACCESS = 34, - FUSE_CREATE = 35, - FUSE_INTERRUPT = 36, - FUSE_BMAP = 37, - FUSE_DESTROY = 38, - FUSE_IOCTL = 39, - FUSE_POLL = 40, - FUSE_NOTIFY_REPLY = 41, - FUSE_BATCH_FORGET = 42, - FUSE_FALLOCATE = 43, - - /* CUSE specific operations */ - CUSE_INIT = 4096, -}; - -enum fuse_notify_code { - FUSE_NOTIFY_POLL = 1, - FUSE_NOTIFY_INVAL_INODE = 2, - FUSE_NOTIFY_INVAL_ENTRY = 3, - FUSE_NOTIFY_STORE = 4, - FUSE_NOTIFY_RETRIEVE = 5, - FUSE_NOTIFY_DELETE = 6, - FUSE_NOTIFY_CODE_MAX, -}; - -/* The read buffer is required to be at least 8k, but may be much larger */ -#define FUSE_MIN_READ_BUFFER 8192 - -#define FUSE_COMPAT_ENTRY_OUT_SIZE 120 - -struct fuse_entry_out { - __u64 nodeid; /* Inode ID */ - __u64 generation; /* Inode generation: nodeid:gen must - be unique for the fs's lifetime */ - __u64 entry_valid; /* Cache timeout for the name */ - __u64 attr_valid; /* Cache timeout for the attributes */ - __u32 entry_valid_nsec; - __u32 attr_valid_nsec; - struct fuse_attr attr; -}; - -struct fuse_forget_in { - __u64 nlookup; -}; - -struct fuse_forget_one { - __u64 nodeid; - __u64 nlookup; -}; - -struct fuse_batch_forget_in { - __u32 count; - __u32 dummy; -}; - -struct fuse_getattr_in { - __u32 getattr_flags; - __u32 dummy; - __u64 fh; -}; - -#define FUSE_COMPAT_ATTR_OUT_SIZE 96 - -struct fuse_attr_out { - __u64 attr_valid; /* Cache timeout for the attributes */ - __u32 attr_valid_nsec; - __u32 dummy; - struct fuse_attr attr; -}; - -#define FUSE_COMPAT_MKNOD_IN_SIZE 8 - -struct fuse_mknod_in { - __u32 mode; - __u32 rdev; - __u32 umask; - __u32 padding; -}; - -struct fuse_mkdir_in { - __u32 mode; - __u32 umask; -}; - -struct fuse_rename_in { - __u64 newdir; -}; - -struct fuse_link_in { - __u64 oldnodeid; -}; - -struct fuse_setattr_in { - __u32 valid; - __u32 padding; - __u64 fh; - __u64 size; - __u64 lock_owner; - __u64 atime; - __u64 mtime; - __u64 unused2; - __u32 atimensec; - __u32 mtimensec; - __u32 unused3; - __u32 mode; - __u32 unused4; - __u32 uid; - __u32 gid; - __u32 unused5; -}; - -struct fuse_open_in { - __u32 flags; - __u32 unused; -}; - -struct fuse_create_in { - __u32 flags; - __u32 mode; - __u32 umask; - __u32 padding; -}; - -struct fuse_open_out { - __u64 fh; - __u32 open_flags; - __u32 padding; -}; - -struct fuse_release_in { - __u64 fh; - __u32 flags; - __u32 release_flags; - __u64 lock_owner; -}; - -struct fuse_flush_in { - __u64 fh; - __u32 unused; - __u32 padding; - __u64 lock_owner; -}; - -struct fuse_read_in { - __u64 fh; - __u64 offset; - __u32 size; - __u32 read_flags; - __u64 lock_owner; - __u32 flags; - __u32 padding; -}; - -#define FUSE_COMPAT_WRITE_IN_SIZE 24 - -struct fuse_write_in { - __u64 fh; - __u64 offset; - __u32 size; - __u32 write_flags; - __u64 lock_owner; - __u32 flags; - __u32 padding; -}; - -struct fuse_write_out { - __u32 size; - __u32 padding; -}; - -#define FUSE_COMPAT_STATFS_SIZE 48 - -struct fuse_statfs_out { - struct fuse_kstatfs st; -}; - -struct fuse_fsync_in { - __u64 fh; - __u32 fsync_flags; - __u32 padding; -}; - -struct fuse_setxattr_in { - __u32 size; - __u32 flags; -}; - -struct fuse_getxattr_in { - __u32 size; - __u32 padding; -}; - -struct fuse_getxattr_out { - __u32 size; - __u32 padding; -}; - -struct fuse_lk_in { - __u64 fh; - __u64 owner; - struct fuse_file_lock lk; - __u32 lk_flags; - __u32 padding; -}; - -struct fuse_lk_out { - struct fuse_file_lock lk; -}; - -struct fuse_access_in { - __u32 mask; - __u32 padding; -}; - -struct fuse_init_in { - __u32 major; - __u32 minor; - __u32 max_readahead; - __u32 flags; -}; - -struct fuse_init_out { - __u32 major; - __u32 minor; - __u32 max_readahead; - __u32 flags; - __u16 max_background; - __u16 congestion_threshold; - __u32 max_write; -}; - -#define CUSE_INIT_INFO_MAX 4096 - -struct cuse_init_in { - __u32 major; - __u32 minor; - __u32 unused; - __u32 flags; -}; - -struct cuse_init_out { - __u32 major; - __u32 minor; - __u32 unused; - __u32 flags; - __u32 max_read; - __u32 max_write; - __u32 dev_major; /* chardev major */ - __u32 dev_minor; /* chardev minor */ - __u32 spare[10]; -}; - -struct fuse_interrupt_in { - __u64 unique; -}; - -struct fuse_bmap_in { - __u64 block; - __u32 blocksize; - __u32 padding; -}; - -struct fuse_bmap_out { - __u64 block; -}; - -struct fuse_ioctl_in { - __u64 fh; - __u32 flags; - __u32 cmd; - __u64 arg; - __u32 in_size; - __u32 out_size; -}; - -struct fuse_ioctl_iovec { - __u64 base; - __u64 len; -}; - -struct fuse_ioctl_out { - __s32 result; - __u32 flags; - __u32 in_iovs; - __u32 out_iovs; -}; - -struct fuse_poll_in { - __u64 fh; - __u64 kh; - __u32 flags; - __u32 padding; -}; - -struct fuse_poll_out { - __u32 revents; - __u32 padding; -}; - -struct fuse_notify_poll_wakeup_out { - __u64 kh; -}; - -struct fuse_fallocate_in { - __u64 fh; - __u64 offset; - __u64 length; - __u32 mode; - __u32 padding; -}; - -struct fuse_in_header { - __u32 len; - __u32 opcode; - __u64 unique; - __u64 nodeid; - __u32 uid; - __u32 gid; - __u32 pid; - __u32 padding; -}; - -struct fuse_out_header { - __u32 len; - __s32 error; - __u64 unique; -}; - -struct fuse_dirent { - __u64 ino; - __u64 off; - __u32 namelen; - __u32 type; - char name[]; -}; - -#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name) -#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1)) -#define FUSE_DIRENT_SIZE(d) \ - FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) - -struct fuse_notify_inval_inode_out { - __u64 ino; - __s64 off; - __s64 len; -}; - -struct fuse_notify_inval_entry_out { - __u64 parent; - __u32 namelen; - __u32 padding; -}; - -struct fuse_notify_delete_out { - __u64 parent; - __u64 child; - __u32 namelen; - __u32 padding; -}; - -struct fuse_notify_store_out { - __u64 nodeid; - __u64 offset; - __u32 size; - __u32 padding; -}; - -struct fuse_notify_retrieve_out { - __u64 notify_unique; - __u64 nodeid; - __u64 offset; - __u32 size; - __u32 padding; -}; - -/* Matches the size of fuse_write_in */ -struct fuse_notify_retrieve_in { - __u64 dummy1; - __u64 offset; - __u32 size; - __u32 dummy2; - __u64 dummy3; - __u64 dummy4; -}; - -#endif /* _LINUX_FUSE_H */ diff --git a/include/linux/futex.h b/include/linux/futex.h index 1e5a26d79232..b0d95cac826e 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -1,129 +1,8 @@ #ifndef _LINUX_FUTEX_H #define _LINUX_FUTEX_H -#include -#include +#include -/* Second argument to futex syscall */ - - -#define FUTEX_WAIT 0 -#define FUTEX_WAKE 1 -#define FUTEX_FD 2 -#define FUTEX_REQUEUE 3 -#define FUTEX_CMP_REQUEUE 4 -#define FUTEX_WAKE_OP 5 -#define FUTEX_LOCK_PI 6 -#define FUTEX_UNLOCK_PI 7 -#define FUTEX_TRYLOCK_PI 8 -#define FUTEX_WAIT_BITSET 9 -#define FUTEX_WAKE_BITSET 10 -#define FUTEX_WAIT_REQUEUE_PI 11 -#define FUTEX_CMP_REQUEUE_PI 12 - -#define FUTEX_PRIVATE_FLAG 128 -#define FUTEX_CLOCK_REALTIME 256 -#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) - -#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) -#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) -#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) - -/* - * Support for robust futexes: the kernel cleans up held futexes at - * thread exit time. - */ - -/* - * Per-lock list entry - embedded in user-space locks, somewhere close - * to the futex field. (Note: user-space uses a double-linked list to - * achieve O(1) list add and remove, but the kernel only needs to know - * about the forward link) - * - * NOTE: this structure is part of the syscall ABI, and must not be - * changed. - */ -struct robust_list { - struct robust_list __user *next; -}; - -/* - * Per-thread list head: - * - * NOTE: this structure is part of the syscall ABI, and must only be - * changed if the change is first communicated with the glibc folks. - * (When an incompatible change is done, we'll increase the structure - * size, which glibc will detect) - */ -struct robust_list_head { - /* - * The head of the list. Points back to itself if empty: - */ - struct robust_list list; - - /* - * This relative offset is set by user-space, it gives the kernel - * the relative position of the futex field to examine. This way - * we keep userspace flexible, to freely shape its data-structure, - * without hardcoding any particular offset into the kernel: - */ - long futex_offset; - - /* - * The death of the thread may race with userspace setting - * up a lock's links. So to handle this race, userspace first - * sets this field to the address of the to-be-taken lock, - * then does the lock acquire, and then adds itself to the - * list, and then clears this field. Hence the kernel will - * always have full knowledge of all locks that the thread - * _might_ have taken. We check the owner TID in any case, - * so only truly owned locks will be handled. - */ - struct robust_list __user *list_op_pending; -}; - -/* - * Are there any waiters for this robust futex: - */ -#define FUTEX_WAITERS 0x80000000 - -/* - * The kernel signals via this bit that a thread holding a futex - * has exited without unlocking the futex. The kernel also does - * a FUTEX_WAKE on such futexes, after setting the bit, to wake - * up any possible waiters: - */ -#define FUTEX_OWNER_DIED 0x40000000 - -/* - * The rest of the robust-futex field is for the TID: - */ -#define FUTEX_TID_MASK 0x3fffffff - -/* - * This limit protects against a deliberately circular list. - * (Not worth introducing an rlimit for it) - */ -#define ROBUST_LIST_LIMIT 2048 - -/* - * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a - * match of any bit. - */ -#define FUTEX_BITSET_MATCH_ANY 0xffffffff - -#ifdef __KERNEL__ struct inode; struct mm_struct; struct task_struct; @@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr) { } #endif -#endif /* __KERNEL__ */ - -#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ -#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ -#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */ -#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */ -#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */ - -#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */ - -#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */ -#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */ -#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */ -#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */ -#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */ -#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */ - -/* FUTEX_WAKE_OP will perform atomically - int oldval = *(int *)UADDR2; - *(int *)UADDR2 = oldval OP OPARG; - if (oldval CMP CMPARG) - wake UADDR2; */ - -#define FUTEX_OP(op, oparg, cmp, cmparg) \ - (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \ - | ((oparg & 0xfff) << 12) | (cmparg & 0xfff)) - #endif diff --git a/include/linux/gameport.h b/include/linux/gameport.h index b986be513406..bb7de09e8d57 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -1,6 +1,3 @@ -#ifndef _GAMEPORT_H -#define _GAMEPORT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,8 +5,9 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _GAMEPORT_H +#define _GAMEPORT_H -#ifdef __KERNEL__ #include #include #include @@ -17,6 +15,7 @@ #include #include #include +#include struct gameport { @@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv); module_driver(__gameport_driver, gameport_register_driver, \ gameport_unregister_driver) -#endif /* __KERNEL__ */ - -#define GAMEPORT_MODE_DISABLED 0 -#define GAMEPORT_MODE_RAW 1 -#define GAMEPORT_MODE_COOKED 2 - -#define GAMEPORT_ID_VENDOR_ANALOG 0x0001 -#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002 -#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003 -#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004 -#define GAMEPORT_ID_VENDOR_GENIUS 0x0005 -#define GAMEPORT_ID_VENDOR_INTERACT 0x0006 -#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007 -#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008 -#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009 -#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a - -#ifdef __KERNEL__ static inline void gameport_trigger(struct gameport *gameport) { @@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne void gameport_start_polling(struct gameport *gameport); void gameport_stop_polling(struct gameport *gameport); -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h deleted file mode 100644 index 552c8a0a12d1..000000000000 --- a/include/linux/gen_stats.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef __LINUX_GEN_STATS_H -#define __LINUX_GEN_STATS_H - -#include - -enum { - TCA_STATS_UNSPEC, - TCA_STATS_BASIC, - TCA_STATS_RATE_EST, - TCA_STATS_QUEUE, - TCA_STATS_APP, - __TCA_STATS_MAX, -}; -#define TCA_STATS_MAX (__TCA_STATS_MAX - 1) - -/** - * struct gnet_stats_basic - byte/packet throughput statistics - * @bytes: number of seen bytes - * @packets: number of seen packets - */ -struct gnet_stats_basic { - __u64 bytes; - __u32 packets; -}; -struct gnet_stats_basic_packed { - __u64 bytes; - __u32 packets; -} __attribute__ ((packed)); - -/** - * struct gnet_stats_rate_est - rate estimator - * @bps: current byte rate - * @pps: current packet rate - */ -struct gnet_stats_rate_est { - __u32 bps; - __u32 pps; -}; - -/** - * struct gnet_stats_queue - queuing statistics - * @qlen: queue length - * @backlog: backlog size of queue - * @drops: number of dropped packets - * @requeues: number of requeues - * @overlimits: number of enqueues over the limit - */ -struct gnet_stats_queue { - __u32 qlen; - __u32 backlog; - __u32 drops; - __u32 requeues; - __u32 overlimits; -}; - -/** - * struct gnet_estimator - rate estimator configuration - * @interval: sampling period - * @ewma_log: the log of measurement window weight - */ -struct gnet_estimator { - signed char interval; - unsigned char ewma_log; -}; - - -#endif /* __LINUX_GEN_STATS_H */ diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 5ab61c1eb6bf..55b685719d52 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -1,86 +1,8 @@ #ifndef __LINUX_GENERIC_NETLINK_H #define __LINUX_GENERIC_NETLINK_H -#include -#include +#include -#define GENL_NAMSIZ 16 /* length of family name */ - -#define GENL_MIN_ID NLMSG_MIN_TYPE -#define GENL_MAX_ID 1023 - -struct genlmsghdr { - __u8 cmd; - __u8 version; - __u16 reserved; -}; - -#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) - -#define GENL_ADMIN_PERM 0x01 -#define GENL_CMD_CAP_DO 0x02 -#define GENL_CMD_CAP_DUMP 0x04 -#define GENL_CMD_CAP_HASPOL 0x08 - -/* - * List of reserved static generic netlink identifiers: - */ -#define GENL_ID_GENERATE 0 -#define GENL_ID_CTRL NLMSG_MIN_TYPE - -/************************************************************************** - * Controller - **************************************************************************/ - -enum { - CTRL_CMD_UNSPEC, - CTRL_CMD_NEWFAMILY, - CTRL_CMD_DELFAMILY, - CTRL_CMD_GETFAMILY, - CTRL_CMD_NEWOPS, - CTRL_CMD_DELOPS, - CTRL_CMD_GETOPS, - CTRL_CMD_NEWMCAST_GRP, - CTRL_CMD_DELMCAST_GRP, - CTRL_CMD_GETMCAST_GRP, /* unused */ - __CTRL_CMD_MAX, -}; - -#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) - -enum { - CTRL_ATTR_UNSPEC, - CTRL_ATTR_FAMILY_ID, - CTRL_ATTR_FAMILY_NAME, - CTRL_ATTR_VERSION, - CTRL_ATTR_HDRSIZE, - CTRL_ATTR_MAXATTR, - CTRL_ATTR_OPS, - CTRL_ATTR_MCAST_GROUPS, - __CTRL_ATTR_MAX, -}; - -#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) - -enum { - CTRL_ATTR_OP_UNSPEC, - CTRL_ATTR_OP_ID, - CTRL_ATTR_OP_FLAGS, - __CTRL_ATTR_OP_MAX, -}; - -#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) - -enum { - CTRL_ATTR_MCAST_GRP_UNSPEC, - CTRL_ATTR_MCAST_GRP_NAME, - CTRL_ATTR_MCAST_GRP_ID, - __CTRL_ATTR_MCAST_GRP_MAX, -}; - -#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) - -#ifdef __KERNEL__ /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); @@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void); #define MODULE_ALIAS_GENL_FAMILY(family)\ MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family) -#endif /* __KERNEL__ */ - #endif /* __LINUX_GENERIC_NETLINK_H */ diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h deleted file mode 100644 index b2de1f9a88d6..000000000000 --- a/include/linux/gfs2_ondisk.h +++ /dev/null @@ -1,464 +0,0 @@ -/* - * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. - * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - */ - -#ifndef __GFS2_ONDISK_DOT_H__ -#define __GFS2_ONDISK_DOT_H__ - -#include - -#define GFS2_MAGIC 0x01161970 -#define GFS2_BASIC_BLOCK 512 -#define GFS2_BASIC_BLOCK_SHIFT 9 - -/* Lock numbers of the LM_TYPE_NONDISK type */ - -#define GFS2_MOUNT_LOCK 0 -#define GFS2_LIVE_LOCK 1 -#define GFS2_TRANS_LOCK 2 -#define GFS2_RENAME_LOCK 3 -#define GFS2_CONTROL_LOCK 4 -#define GFS2_MOUNTED_LOCK 5 - -/* Format numbers for various metadata types */ - -#define GFS2_FORMAT_NONE 0 -#define GFS2_FORMAT_SB 100 -#define GFS2_FORMAT_RG 200 -#define GFS2_FORMAT_RB 300 -#define GFS2_FORMAT_DI 400 -#define GFS2_FORMAT_IN 500 -#define GFS2_FORMAT_LF 600 -#define GFS2_FORMAT_JD 700 -#define GFS2_FORMAT_LH 800 -#define GFS2_FORMAT_LD 900 -#define GFS2_FORMAT_LB 1000 -#define GFS2_FORMAT_EA 1600 -#define GFS2_FORMAT_ED 1700 -#define GFS2_FORMAT_QC 1400 -/* These are format numbers for entities contained in files */ -#define GFS2_FORMAT_RI 1100 -#define GFS2_FORMAT_DE 1200 -#define GFS2_FORMAT_QU 1500 -/* These are part of the superblock */ -#define GFS2_FORMAT_FS 1801 -#define GFS2_FORMAT_MULTI 1900 - -/* - * An on-disk inode number - */ - -struct gfs2_inum { - __be64 no_formal_ino; - __be64 no_addr; -}; - -/* - * Generic metadata head structure - * Every inplace buffer logged in the journal must start with this. - */ - -#define GFS2_METATYPE_NONE 0 -#define GFS2_METATYPE_SB 1 -#define GFS2_METATYPE_RG 2 -#define GFS2_METATYPE_RB 3 -#define GFS2_METATYPE_DI 4 -#define GFS2_METATYPE_IN 5 -#define GFS2_METATYPE_LF 6 -#define GFS2_METATYPE_JD 7 -#define GFS2_METATYPE_LH 8 -#define GFS2_METATYPE_LD 9 -#define GFS2_METATYPE_LB 12 -#define GFS2_METATYPE_EA 10 -#define GFS2_METATYPE_ED 11 -#define GFS2_METATYPE_QC 14 - -struct gfs2_meta_header { - __be32 mh_magic; - __be32 mh_type; - __be64 __pad0; /* Was generation number in gfs1 */ - __be32 mh_format; - /* This union is to keep userspace happy */ - union { - __be32 mh_jid; /* Was incarnation number in gfs1 */ - __be32 __pad1; - }; -}; - -/* - * super-block structure - * - * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes) - * - * Order is important, need to be able to read old superblocks to do on-disk - * version upgrades. - */ - -/* Address of superblock in GFS2 basic blocks */ -#define GFS2_SB_ADDR 128 - -/* The lock number for the superblock (must be zero) */ -#define GFS2_SB_LOCK 0 - -/* Requirement: GFS2_LOCKNAME_LEN % 8 == 0 - Includes: the fencing zero at the end */ -#define GFS2_LOCKNAME_LEN 64 - -struct gfs2_sb { - struct gfs2_meta_header sb_header; - - __be32 sb_fs_format; - __be32 sb_multihost_format; - __u32 __pad0; /* Was superblock flags in gfs1 */ - - __be32 sb_bsize; - __be32 sb_bsize_shift; - __u32 __pad1; /* Was journal segment size in gfs1 */ - - struct gfs2_inum sb_master_dir; /* Was jindex dinode in gfs1 */ - struct gfs2_inum __pad2; /* Was rindex dinode in gfs1 */ - struct gfs2_inum sb_root_dir; - - char sb_lockproto[GFS2_LOCKNAME_LEN]; - char sb_locktable[GFS2_LOCKNAME_LEN]; - - struct gfs2_inum __pad3; /* Was quota inode in gfs1 */ - struct gfs2_inum __pad4; /* Was licence inode in gfs1 */ -#define GFS2_HAS_UUID 1 - __u8 sb_uuid[16]; /* The UUID, maybe 0 for backwards compat */ -}; - -/* - * resource index structure - */ - -struct gfs2_rindex { - __be64 ri_addr; /* grp block disk address */ - __be32 ri_length; /* length of rgrp header in fs blocks */ - __u32 __pad; - - __be64 ri_data0; /* first data location */ - __be32 ri_data; /* num of data blocks in rgrp */ - - __be32 ri_bitbytes; /* number of bytes in data bitmaps */ - - __u8 ri_reserved[64]; -}; - -/* - * resource group header structure - */ - -/* Number of blocks per byte in rgrp */ -#define GFS2_NBBY 4 -#define GFS2_BIT_SIZE 2 -#define GFS2_BIT_MASK 0x00000003 - -#define GFS2_BLKST_FREE 0 -#define GFS2_BLKST_USED 1 -#define GFS2_BLKST_UNLINKED 2 -#define GFS2_BLKST_DINODE 3 - -#define GFS2_RGF_JOURNAL 0x00000001 -#define GFS2_RGF_METAONLY 0x00000002 -#define GFS2_RGF_DATAONLY 0x00000004 -#define GFS2_RGF_NOALLOC 0x00000008 -#define GFS2_RGF_TRIMMED 0x00000010 - -struct gfs2_rgrp_lvb { - __be32 rl_magic; - __be32 rl_flags; - __be32 rl_free; - __be32 rl_dinodes; - __be64 rl_igeneration; - __be32 rl_unlinked; - __be32 __pad; -}; - -struct gfs2_rgrp { - struct gfs2_meta_header rg_header; - - __be32 rg_flags; - __be32 rg_free; - __be32 rg_dinodes; - __be32 __pad; - __be64 rg_igeneration; - - __u8 rg_reserved[80]; /* Several fields from gfs1 now reserved */ -}; - -/* - * quota structure - */ - -struct gfs2_quota { - __be64 qu_limit; - __be64 qu_warn; - __be64 qu_value; - __u8 qu_reserved[64]; -}; - -/* - * dinode structure - */ - -#define GFS2_MAX_META_HEIGHT 10 -#define GFS2_DIR_MAX_DEPTH 17 - -#define DT2IF(dt) (((dt) << 12) & S_IFMT) -#define IF2DT(sif) (((sif) & S_IFMT) >> 12) - -enum { - gfs2fl_Jdata = 0, - gfs2fl_ExHash = 1, - gfs2fl_Unused = 2, - gfs2fl_EaIndirect = 3, - gfs2fl_Directio = 4, - gfs2fl_Immutable = 5, - gfs2fl_AppendOnly = 6, - gfs2fl_NoAtime = 7, - gfs2fl_Sync = 8, - gfs2fl_System = 9, - gfs2fl_TopLevel = 10, - gfs2fl_TruncInProg = 29, - gfs2fl_InheritDirectio = 30, - gfs2fl_InheritJdata = 31, -}; - -/* Dinode flags */ -#define GFS2_DIF_JDATA 0x00000001 -#define GFS2_DIF_EXHASH 0x00000002 -#define GFS2_DIF_UNUSED 0x00000004 /* only in gfs1 */ -#define GFS2_DIF_EA_INDIRECT 0x00000008 -#define GFS2_DIF_DIRECTIO 0x00000010 -#define GFS2_DIF_IMMUTABLE 0x00000020 -#define GFS2_DIF_APPENDONLY 0x00000040 -#define GFS2_DIF_NOATIME 0x00000080 -#define GFS2_DIF_SYNC 0x00000100 -#define GFS2_DIF_SYSTEM 0x00000200 /* New in gfs2 */ -#define GFS2_DIF_TOPDIR 0x00000400 /* New in gfs2 */ -#define GFS2_DIF_TRUNC_IN_PROG 0x20000000 /* New in gfs2 */ -#define GFS2_DIF_INHERIT_DIRECTIO 0x40000000 /* only in gfs1 */ -#define GFS2_DIF_INHERIT_JDATA 0x80000000 - -struct gfs2_dinode { - struct gfs2_meta_header di_header; - - struct gfs2_inum di_num; - - __be32 di_mode; /* mode of file */ - __be32 di_uid; /* owner's user id */ - __be32 di_gid; /* owner's group id */ - __be32 di_nlink; /* number of links to this file */ - __be64 di_size; /* number of bytes in file */ - __be64 di_blocks; /* number of blocks in file */ - __be64 di_atime; /* time last accessed */ - __be64 di_mtime; /* time last modified */ - __be64 di_ctime; /* time last changed */ - __be32 di_major; /* device major number */ - __be32 di_minor; /* device minor number */ - - /* This section varies from gfs1. Padding added to align with - * remainder of dinode - */ - __be64 di_goal_meta; /* rgrp to alloc from next */ - __be64 di_goal_data; /* data block goal */ - __be64 di_generation; /* generation number for NFS */ - - __be32 di_flags; /* GFS2_DIF_... */ - __be32 di_payload_format; /* GFS2_FORMAT_... */ - __u16 __pad1; /* Was ditype in gfs1 */ - __be16 di_height; /* height of metadata */ - __u32 __pad2; /* Unused incarnation number from gfs1 */ - - /* These only apply to directories */ - __u16 __pad3; /* Padding */ - __be16 di_depth; /* Number of bits in the table */ - __be32 di_entries; /* The number of entries in the directory */ - - struct gfs2_inum __pad4; /* Unused even in current gfs1 */ - - __be64 di_eattr; /* extended attribute block number */ - __be32 di_atime_nsec; /* nsec portion of atime */ - __be32 di_mtime_nsec; /* nsec portion of mtime */ - __be32 di_ctime_nsec; /* nsec portion of ctime */ - - __u8 di_reserved[44]; -}; - -/* - * directory structure - many of these per directory file - */ - -#define GFS2_FNAMESIZE 255 -#define GFS2_DIRENT_SIZE(name_len) ((sizeof(struct gfs2_dirent) + (name_len) + 7) & ~7) - -struct gfs2_dirent { - struct gfs2_inum de_inum; - __be32 de_hash; - __be16 de_rec_len; - __be16 de_name_len; - __be16 de_type; - __u8 __pad[14]; -}; - -/* - * Header of leaf directory nodes - */ - -struct gfs2_leaf { - struct gfs2_meta_header lf_header; - - __be16 lf_depth; /* Depth of leaf */ - __be16 lf_entries; /* Number of dirents in leaf */ - __be32 lf_dirent_format; /* Format of the dirents */ - __be64 lf_next; /* Next leaf, if overflow */ - - __u8 lf_reserved[64]; -}; - -/* - * Extended attribute header format - * - * This works in a similar way to dirents. There is a fixed size header - * followed by a variable length section made up of the name and the - * associated data. In the case of a "stuffed" entry, the value is - * inline directly after the name, the ea_num_ptrs entry will be - * zero in that case. For non-"stuffed" entries, there will be - * a set of pointers (aligned to 8 byte boundary) to the block(s) - * containing the value. - * - * The blocks containing the values and the blocks containing the - * extended attribute headers themselves all start with the common - * metadata header. Each inode, if it has extended attributes, will - * have either a single block containing the extended attribute headers - * or a single indirect block pointing to blocks containing the - * extended attribure headers. - * - * The maximim size of the data part of an extended attribute is 64k - * so the number of blocks required depends upon block size. Since the - * block size also determines the number of pointers in an indirect - * block, its a fairly complicated calculation to work out the maximum - * number of blocks that an inode may have relating to extended attributes. - * - */ - -#define GFS2_EA_MAX_NAME_LEN 255 -#define GFS2_EA_MAX_DATA_LEN 65536 - -#define GFS2_EATYPE_UNUSED 0 -#define GFS2_EATYPE_USR 1 -#define GFS2_EATYPE_SYS 2 -#define GFS2_EATYPE_SECURITY 3 - -#define GFS2_EATYPE_LAST 3 -#define GFS2_EATYPE_VALID(x) ((x) <= GFS2_EATYPE_LAST) - -#define GFS2_EAFLAG_LAST 0x01 /* last ea in block */ - -struct gfs2_ea_header { - __be32 ea_rec_len; - __be32 ea_data_len; - __u8 ea_name_len; /* no NULL pointer after the string */ - __u8 ea_type; /* GFS2_EATYPE_... */ - __u8 ea_flags; /* GFS2_EAFLAG_... */ - __u8 ea_num_ptrs; - __u32 __pad; -}; - -/* - * Log header structure - */ - -#define GFS2_LOG_HEAD_UNMOUNT 0x00000001 /* log is clean */ - -struct gfs2_log_header { - struct gfs2_meta_header lh_header; - - __be64 lh_sequence; /* Sequence number of this transaction */ - __be32 lh_flags; /* GFS2_LOG_HEAD_... */ - __be32 lh_tail; /* Block number of log tail */ - __be32 lh_blkno; - __be32 lh_hash; -}; - -/* - * Log type descriptor - */ - -#define GFS2_LOG_DESC_METADATA 300 -/* ld_data1 is the number of metadata blocks in the descriptor. - ld_data2 is unused. */ - -#define GFS2_LOG_DESC_REVOKE 301 -/* ld_data1 is the number of revoke blocks in the descriptor. - ld_data2 is unused. */ - -#define GFS2_LOG_DESC_JDATA 302 -/* ld_data1 is the number of data blocks in the descriptor. - ld_data2 is unused. */ - -struct gfs2_log_descriptor { - struct gfs2_meta_header ld_header; - - __be32 ld_type; /* GFS2_LOG_DESC_... */ - __be32 ld_length; /* Number of buffers in this chunk */ - __be32 ld_data1; /* descriptor-specific field */ - __be32 ld_data2; /* descriptor-specific field */ - - __u8 ld_reserved[32]; -}; - -/* - * Inum Range - * Describe a range of formal inode numbers allocated to - * one machine to assign to inodes. - */ - -#define GFS2_INUM_QUANTUM 1048576 - -struct gfs2_inum_range { - __be64 ir_start; - __be64 ir_length; -}; - -/* - * Statfs change - * Describes an change to the pool of free and allocated - * blocks. - */ - -struct gfs2_statfs_change { - __be64 sc_total; - __be64 sc_free; - __be64 sc_dinodes; -}; - -/* - * Quota change - * Describes an allocation change for a particular - * user or group. - */ - -#define GFS2_QCF_USER 0x00000001 - -struct gfs2_quota_change { - __be64 qc_change; - __be32 qc_flags; /* GFS2_QCF_... */ - __be32 qc_id; -}; - -struct gfs2_quota_lvb { - __be32 qb_magic; - __u32 __pad; - __be64 qb_limit; /* Hard limit of # blocks to alloc */ - __be64 qb_warn; /* Warn user when alloc is above this # */ - __be64 qb_value; /* Current # blocks allocated */ -}; - -#endif /* __GFS2_ONDISK_DOT_H__ */ diff --git a/include/linux/gigaset_dev.h b/include/linux/gigaset_dev.h deleted file mode 100644 index 258ba82937e7..000000000000 --- a/include/linux/gigaset_dev.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * interface to user space for the gigaset driver - * - * Copyright (c) 2004 by Hansjoerg Lipp - * - * ===================================================================== - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * ===================================================================== - */ - -#ifndef GIGASET_INTERFACE_H -#define GIGASET_INTERFACE_H - -#include - -/* The magic IOCTL value for this interface. */ -#define GIGASET_IOCTL 0x47 - -/* enable/disable device control via character device (lock out ISDN subsys) */ -#define GIGASET_REDIR _IOWR(GIGASET_IOCTL, 0, int) - -/* enable adapter configuration mode (M10x only) */ -#define GIGASET_CONFIG _IOWR(GIGASET_IOCTL, 1, int) - -/* set break characters (M105 only) */ -#define GIGASET_BRKCHARS _IOW(GIGASET_IOCTL, 2, unsigned char[6]) - -/* get version information selected by arg[0] */ -#define GIGASET_VERSION _IOWR(GIGASET_IOCTL, 3, unsigned[4]) -/* values for GIGASET_VERSION arg[0] */ -#define GIGVER_DRIVER 0 /* get driver version */ -#define GIGVER_COMPAT 1 /* get interface compatibility version */ -#define GIGVER_FWBASE 2 /* get base station firmware version */ - -#endif diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index ee275c8b3df1..1acb1445e05f 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -7,24 +7,14 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. */ - #ifndef __HDLC_H #define __HDLC_H -#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */ -#if 0 -#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */ -#else -#define HDLC_MAX_MRU 1600 /* as required for FR network */ -#endif - - -#ifdef __KERNEL__ - #include #include #include +#include /* This structure is a private property of HDLC protocols. Hardware drivers have no interest here */ @@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb, return htons(ETH_P_HDLC); } -#endif /* __KERNEL */ #endif /* __HDLC_H */ diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h index c010b4a785b8..be3be25bb898 100644 --- a/include/linux/hdlcdrv.h +++ b/include/linux/hdlcdrv.h @@ -3,110 +3,14 @@ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA */ - #ifndef _HDLCDRV_H #define _HDLCDRV_H -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct hdlcdrv_params { - int iobase; - int irq; - int dma; - int dma2; - int seriobase; - int pariobase; - int midiiobase; -}; - -struct hdlcdrv_channel_params { - int tx_delay; /* the transmitter keyup delay in 10ms units */ - int tx_tail; /* the transmitter keyoff delay in 10ms units */ - int slottime; /* the slottime in 10ms; usually 10 = 100ms */ - int ppersist; /* the p-persistence 0..255 */ - int fulldup; /* some driver do not support full duplex, setting */ - /* this just makes them send even if DCD is on */ -}; - -struct hdlcdrv_old_channel_state { - int ptt; - int dcd; - int ptt_keyed; -}; - -struct hdlcdrv_channel_state { - int ptt; - int dcd; - int ptt_keyed; - unsigned long tx_packets; - unsigned long tx_errors; - unsigned long rx_packets; - unsigned long rx_errors; -}; - -struct hdlcdrv_ioctl { - int cmd; - union { - struct hdlcdrv_params mp; - struct hdlcdrv_channel_params cp; - struct hdlcdrv_channel_state cs; - struct hdlcdrv_old_channel_state ocs; - unsigned int calibrate; - unsigned char bits; - char modename[128]; - char drivername[32]; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values - */ -#define HDLCDRVCTL_GETMODEMPAR 0 -#define HDLCDRVCTL_SETMODEMPAR 1 -#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */ -#define HDLCDRVCTL_GETCHANNELPAR 10 -#define HDLCDRVCTL_SETCHANNELPAR 11 -#define HDLCDRVCTL_OLDGETSTAT 20 -#define HDLCDRVCTL_CALIBRATE 21 -#define HDLCDRVCTL_GETSTAT 22 - -/* - * these are mainly for debugging purposes - */ -#define HDLCDRVCTL_GETSAMPLES 30 -#define HDLCDRVCTL_GETBITS 31 - -/* - * not handled by hdlcdrv, but by its depending drivers - */ -#define HDLCDRVCTL_GETMODE 40 -#define HDLCDRVCTL_SETMODE 41 -#define HDLCDRVCTL_MODELIST 42 -#define HDLCDRVCTL_DRIVERNAME 43 - -/* - * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK - */ -#define HDLCDRV_PARMASK_IOBASE (1<<0) -#define HDLCDRV_PARMASK_IRQ (1<<1) -#define HDLCDRV_PARMASK_DMA (1<<2) -#define HDLCDRV_PARMASK_DMA2 (1<<3) -#define HDLCDRV_PARMASK_SERIOBASE (1<<4) -#define HDLCDRV_PARMASK_PARIOBASE (1<<5) -#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6) - -/* -------------------------------------------------------------------- */ - -#ifdef __KERNEL__ #include #include #include +#include #define HDLCDRV_MAGIC 0x5ac6e778 #define HDLCDRV_HDLCBUFFER 32 /* should be a power of 2 for speed reasons */ @@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev); -#endif /* __KERNEL__ */ - -/* -------------------------------------------------------------------- */ - #endif /* _HDLCDRV_H */ - -/* -------------------------------------------------------------------- */ diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h deleted file mode 100644 index 29ee2873f4a8..000000000000 --- a/include/linux/hdreg.h +++ /dev/null @@ -1,658 +0,0 @@ -#ifndef _LINUX_HDREG_H -#define _LINUX_HDREG_H - -#include - -/* - * Command Header sizes for IOCTL commands - */ - -#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8)) -#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8)) -#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8)) - -#define IDE_DRIVE_TASK_NO_DATA 0 -#ifndef __KERNEL__ -#define IDE_DRIVE_TASK_INVALID -1 -#define IDE_DRIVE_TASK_SET_XFER 1 -#define IDE_DRIVE_TASK_IN 2 -#define IDE_DRIVE_TASK_OUT 3 -#endif -#define IDE_DRIVE_TASK_RAW_WRITE 4 - -/* - * Define standard taskfile in/out register - */ -#define IDE_TASKFILE_STD_IN_FLAGS 0xFE -#define IDE_HOB_STD_IN_FLAGS 0x3C -#ifndef __KERNEL__ -#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE -#define IDE_HOB_STD_OUT_FLAGS 0x3C - -typedef unsigned char task_ioreg_t; -typedef unsigned long sata_ioreg_t; -#endif - -typedef union ide_reg_valid_s { - unsigned all : 16; - struct { - unsigned data : 1; - unsigned error_feature : 1; - unsigned sector : 1; - unsigned nsector : 1; - unsigned lcyl : 1; - unsigned hcyl : 1; - unsigned select : 1; - unsigned status_command : 1; - - unsigned data_hob : 1; - unsigned error_feature_hob : 1; - unsigned sector_hob : 1; - unsigned nsector_hob : 1; - unsigned lcyl_hob : 1; - unsigned hcyl_hob : 1; - unsigned select_hob : 1; - unsigned control_hob : 1; - } b; -} ide_reg_valid_t; - -typedef struct ide_task_request_s { - __u8 io_ports[8]; - __u8 hob_ports[8]; /* bytes 6 and 7 are unused */ - ide_reg_valid_t out_flags; - ide_reg_valid_t in_flags; - int data_phase; - int req_cmd; - unsigned long out_size; - unsigned long in_size; -} ide_task_request_t; - -typedef struct ide_ioctl_request_s { - ide_task_request_t *task_request; - unsigned char *out_buffer; - unsigned char *in_buffer; -} ide_ioctl_request_t; - -struct hd_drive_cmd_hdr { - __u8 command; - __u8 sector_number; - __u8 feature; - __u8 sector_count; -}; - -#ifndef __KERNEL__ -typedef struct hd_drive_task_hdr { - __u8 data; - __u8 feature; - __u8 sector_count; - __u8 sector_number; - __u8 low_cylinder; - __u8 high_cylinder; - __u8 device_head; - __u8 command; -} task_struct_t; - -typedef struct hd_drive_hob_hdr { - __u8 data; - __u8 feature; - __u8 sector_count; - __u8 sector_number; - __u8 low_cylinder; - __u8 high_cylinder; - __u8 device_head; - __u8 control; -} hob_struct_t; -#endif - -#define TASKFILE_NO_DATA 0x0000 - -#define TASKFILE_IN 0x0001 -#define TASKFILE_MULTI_IN 0x0002 - -#define TASKFILE_OUT 0x0004 -#define TASKFILE_MULTI_OUT 0x0008 -#define TASKFILE_IN_OUT 0x0010 - -#define TASKFILE_IN_DMA 0x0020 -#define TASKFILE_OUT_DMA 0x0040 -#define TASKFILE_IN_DMAQ 0x0080 -#define TASKFILE_OUT_DMAQ 0x0100 - -#ifndef __KERNEL__ -#define TASKFILE_P_IN 0x0200 -#define TASKFILE_P_OUT 0x0400 -#define TASKFILE_P_IN_DMA 0x0800 -#define TASKFILE_P_OUT_DMA 0x1000 -#define TASKFILE_P_IN_DMAQ 0x2000 -#define TASKFILE_P_OUT_DMAQ 0x4000 -#define TASKFILE_48 0x8000 -#define TASKFILE_INVALID 0x7fff -#endif - -#ifndef __KERNEL__ -/* ATA/ATAPI Commands pre T13 Spec */ -#define WIN_NOP 0x00 -/* - * 0x01->0x02 Reserved - */ -#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */ -/* - * 0x04->0x07 Reserved - */ -#define WIN_SRST 0x08 /* ATAPI soft reset command */ -#define WIN_DEVICE_RESET 0x08 -/* - * 0x09->0x0F Reserved - */ -#define WIN_RECAL 0x10 -#define WIN_RESTORE WIN_RECAL -/* - * 0x10->0x1F Reserved - */ -#define WIN_READ 0x20 /* 28-Bit */ -#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */ -#define WIN_READ_LONG 0x22 /* 28-Bit */ -#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */ -#define WIN_READ_EXT 0x24 /* 48-Bit */ -#define WIN_READDMA_EXT 0x25 /* 48-Bit */ -#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */ -#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */ -/* - * 0x28 - */ -#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */ -/* - * 0x2A->0x2F Reserved - */ -#define WIN_WRITE 0x30 /* 28-Bit */ -#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */ -#define WIN_WRITE_LONG 0x32 /* 28-Bit */ -#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */ -#define WIN_WRITE_EXT 0x34 /* 48-Bit */ -#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */ -#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */ -#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */ -#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */ -#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */ -/* - * 0x3A->0x3B Reserved - */ -#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */ -/* - * 0x3D->0x3F Reserved - */ -#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */ -#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */ -#define WIN_VERIFY_EXT 0x42 /* 48-Bit */ -/* - * 0x43->0x4F Reserved - */ -#define WIN_FORMAT 0x50 -/* - * 0x51->0x5F Reserved - */ -#define WIN_INIT 0x60 -/* - * 0x61->0x5F Reserved - */ -#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */ - -#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */ -#define WIN_DIAGNOSE 0x90 -#define WIN_SPECIFY 0x91 /* set drive geometry translation */ -#define WIN_DOWNLOAD_MICROCODE 0x92 -#define WIN_STANDBYNOW2 0x94 -#define WIN_STANDBY2 0x96 -#define WIN_SETIDLE2 0x97 -#define WIN_CHECKPOWERMODE2 0x98 -#define WIN_SLEEPNOW2 0x99 -/* - * 0x9A VENDOR - */ -#define WIN_PACKETCMD 0xA0 /* Send a packet command. */ -#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */ -#define WIN_QUEUED_SERVICE 0xA2 -#define WIN_SMART 0xB0 /* self-monitoring and reporting */ -#define CFA_ERASE_SECTORS 0xC0 -#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/ -#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */ -#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */ -#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */ -#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */ -#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */ -#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */ -#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */ -#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */ -#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */ -#define WIN_GETMEDIASTATUS 0xDA -#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */ -#define WIN_POSTBOOT 0xDC -#define WIN_PREBOOT 0xDD -#define WIN_DOORLOCK 0xDE /* lock door on removable drives */ -#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */ -#define WIN_STANDBYNOW1 0xE0 -#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */ -#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */ -#define WIN_SETIDLE1 0xE3 -#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */ -#define WIN_CHECKPOWERMODE1 0xE5 -#define WIN_SLEEPNOW1 0xE6 -#define WIN_FLUSH_CACHE 0xE7 -#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */ -#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */ - /* SET_FEATURES 0x22 or 0xDD */ -#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */ -#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */ -#define WIN_MEDIAEJECT 0xED -#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */ -#define WIN_SETFEATURES 0xEF /* set special drive features */ -#define EXABYTE_ENABLE_NEST 0xF0 -#define WIN_SECURITY_SET_PASS 0xF1 -#define WIN_SECURITY_UNLOCK 0xF2 -#define WIN_SECURITY_ERASE_PREPARE 0xF3 -#define WIN_SECURITY_ERASE_UNIT 0xF4 -#define WIN_SECURITY_FREEZE_LOCK 0xF5 -#define WIN_SECURITY_DISABLE 0xF6 -#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */ -#define WIN_SET_MAX 0xF9 -#define DISABLE_SEAGATE 0xFB - -/* WIN_SMART sub-commands */ - -#define SMART_READ_VALUES 0xD0 -#define SMART_READ_THRESHOLDS 0xD1 -#define SMART_AUTOSAVE 0xD2 -#define SMART_SAVE 0xD3 -#define SMART_IMMEDIATE_OFFLINE 0xD4 -#define SMART_READ_LOG_SECTOR 0xD5 -#define SMART_WRITE_LOG_SECTOR 0xD6 -#define SMART_WRITE_THRESHOLDS 0xD7 -#define SMART_ENABLE 0xD8 -#define SMART_DISABLE 0xD9 -#define SMART_STATUS 0xDA -#define SMART_AUTO_OFFLINE 0xDB - -/* Password used in TF4 & TF5 executing SMART commands */ - -#define SMART_LCYL_PASS 0x4F -#define SMART_HCYL_PASS 0xC2 - -/* WIN_SETFEATURES sub-commands */ -#define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */ -#define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */ -#define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */ -#define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */ -#define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */ -#define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */ -#define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */ -#define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */ -#define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */ -#define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */ -#define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */ -#define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */ -#define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */ -#define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */ -#define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */ -#define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */ -#define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */ -#define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */ -#define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */ -#define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */ -#define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */ -#define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */ -#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */ -#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */ -#define SETFEATURES_EN_REST 0xAC /* ATA-1 */ -#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */ -#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */ -#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */ -#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */ -#define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */ -#define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */ - -/* WIN_SECURITY sub-commands */ - -#define SECURITY_SET_PASSWORD 0xBA -#define SECURITY_UNLOCK 0xBB -#define SECURITY_ERASE_PREPARE 0xBC -#define SECURITY_ERASE_UNIT 0xBD -#define SECURITY_FREEZE_LOCK 0xBE -#define SECURITY_DISABLE_PASSWORD 0xBF -#endif /* __KERNEL__ */ - -struct hd_geometry { - unsigned char heads; - unsigned char sectors; - unsigned short cylinders; - unsigned long start; -}; - -/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */ -#define HDIO_GETGEO 0x0301 /* get device geometry */ -#define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */ -#define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */ -#define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */ - -#define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */ - -#define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */ -#define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */ -#define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */ -#define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */ -#define HDIO_GET_DMA 0x030b /* get use-dma flag */ -#define HDIO_GET_NICE 0x030c /* get nice flags */ -#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */ -#define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */ -#define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */ -#define HDIO_GET_ADDRESS 0x0310 /* */ - -#define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */ -#define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */ -#define HDIO_DRIVE_RESET 0x031c /* execute a device reset */ -#define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */ -#define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */ -#define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */ -#define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK - -/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */ -#define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */ -#define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */ -#define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */ -#define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */ -#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ -#define HDIO_SET_DMA 0x0326 /* change use-dma flag */ -#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ -#ifndef __KERNEL__ -#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */ -#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */ -#endif -#define HDIO_SET_NICE 0x0329 /* set nice flags */ -#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */ -#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */ -#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */ -#define HDIO_SET_QDMA 0x032e /* change use-qdma flag */ -#define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */ - -/* bus states */ -enum { - BUSSTATE_OFF = 0, - BUSSTATE_ON, - BUSSTATE_TRISTATE -}; - -/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */ -/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */ -/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */ -/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */ -/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */ - -#define __NEW_HD_DRIVE_ID - -#ifndef __KERNEL__ -/* - * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec. - * - * If you change something here, please remember to update fix_driveid() in - * ide/probe.c. - */ -struct hd_driveid { - unsigned short config; /* lots of obsolete bit flags */ - unsigned short cyls; /* Obsolete, "physical" cyls */ - unsigned short reserved2; /* reserved (word 2) */ - unsigned short heads; /* Obsolete, "physical" heads */ - unsigned short track_bytes; /* unformatted bytes per track */ - unsigned short sector_bytes; /* unformatted bytes per sector */ - unsigned short sectors; /* Obsolete, "physical" sectors per track */ - unsigned short vendor0; /* vendor unique */ - unsigned short vendor1; /* vendor unique */ - unsigned short vendor2; /* Retired vendor unique */ - unsigned char serial_no[20]; /* 0 = not_specified */ - unsigned short buf_type; /* Retired */ - unsigned short buf_size; /* Retired, 512 byte increments - * 0 = not_specified - */ - unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */ - unsigned char fw_rev[8]; /* 0 = not_specified */ - unsigned char model[40]; /* 0 = not_specified */ - unsigned char max_multsect; /* 0=not_implemented */ - unsigned char vendor3; /* vendor unique */ - unsigned short dword_io; /* 0=not_implemented; 1=implemented */ - unsigned char vendor4; /* vendor unique */ - unsigned char capability; /* (upper byte of word 49) - * 3: IORDYsup - * 2: IORDYsw - * 1: LBA - * 0: DMA - */ - unsigned short reserved50; /* reserved (word 50) */ - unsigned char vendor5; /* Obsolete, vendor unique */ - unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */ - unsigned char vendor6; /* Obsolete, vendor unique */ - unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */ - unsigned short field_valid; /* (word 53) - * 2: ultra_ok word 88 - * 1: eide_ok words 64-70 - * 0: cur_ok words 54-58 - */ - unsigned short cur_cyls; /* Obsolete, logical cylinders */ - unsigned short cur_heads; /* Obsolete, l heads */ - unsigned short cur_sectors; /* Obsolete, l sectors per track */ - unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */ - unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */ - unsigned char multsect; /* current multiple sector count */ - unsigned char multsect_valid; /* when (bit0==1) multsect is ok */ - unsigned int lba_capacity; /* Obsolete, total number of sectors */ - unsigned short dma_1word; /* Obsolete, single-word dma info */ - unsigned short dma_mword; /* multiple-word dma info */ - unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */ - unsigned short eide_dma_min; /* min mword dma cycle time (ns) */ - unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */ - unsigned short eide_pio; /* min cycle time (ns), no IORDY */ - unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */ - unsigned short words69_70[2]; /* reserved words 69-70 - * future command overlap and queuing - */ - unsigned short words71_74[4]; /* reserved words 71-74 - * for IDENTIFY PACKET DEVICE command - */ - unsigned short queue_depth; /* (word 75) - * 15:5 reserved - * 4:0 Maximum queue depth -1 - */ - unsigned short words76_79[4]; /* reserved words 76-79 */ - unsigned short major_rev_num; /* (word 80) */ - unsigned short minor_rev_num; /* (word 81) */ - unsigned short command_set_1; /* (word 82) supported - * 15: Obsolete - * 14: NOP command - * 13: READ_BUFFER - * 12: WRITE_BUFFER - * 11: Obsolete - * 10: Host Protected Area - * 9: DEVICE Reset - * 8: SERVICE Interrupt - * 7: Release Interrupt - * 6: look-ahead - * 5: write cache - * 4: PACKET Command - * 3: Power Management Feature Set - * 2: Removable Feature Set - * 1: Security Feature Set - * 0: SMART Feature Set - */ - unsigned short command_set_2; /* (word 83) - * 15: Shall be ZERO - * 14: Shall be ONE - * 13: FLUSH CACHE EXT - * 12: FLUSH CACHE - * 11: Device Configuration Overlay - * 10: 48-bit Address Feature Set - * 9: Automatic Acoustic Management - * 8: SET MAX security - * 7: reserved 1407DT PARTIES - * 6: SetF sub-command Power-Up - * 5: Power-Up in Standby Feature Set - * 4: Removable Media Notification - * 3: APM Feature Set - * 2: CFA Feature Set - * 1: READ/WRITE DMA QUEUED - * 0: Download MicroCode - */ - unsigned short cfsse; /* (word 84) - * cmd set-feature supported extensions - * 15: Shall be ZERO - * 14: Shall be ONE - * 13:6 reserved - * 5: General Purpose Logging - * 4: Streaming Feature Set - * 3: Media Card Pass Through - * 2: Media Serial Number Valid - * 1: SMART selt-test supported - * 0: SMART error logging - */ - unsigned short cfs_enable_1; /* (word 85) - * command set-feature enabled - * 15: Obsolete - * 14: NOP command - * 13: READ_BUFFER - * 12: WRITE_BUFFER - * 11: Obsolete - * 10: Host Protected Area - * 9: DEVICE Reset - * 8: SERVICE Interrupt - * 7: Release Interrupt - * 6: look-ahead - * 5: write cache - * 4: PACKET Command - * 3: Power Management Feature Set - * 2: Removable Feature Set - * 1: Security Feature Set - * 0: SMART Feature Set - */ - unsigned short cfs_enable_2; /* (word 86) - * command set-feature enabled - * 15: Shall be ZERO - * 14: Shall be ONE - * 13: FLUSH CACHE EXT - * 12: FLUSH CACHE - * 11: Device Configuration Overlay - * 10: 48-bit Address Feature Set - * 9: Automatic Acoustic Management - * 8: SET MAX security - * 7: reserved 1407DT PARTIES - * 6: SetF sub-command Power-Up - * 5: Power-Up in Standby Feature Set - * 4: Removable Media Notification - * 3: APM Feature Set - * 2: CFA Feature Set - * 1: READ/WRITE DMA QUEUED - * 0: Download MicroCode - */ - unsigned short csf_default; /* (word 87) - * command set-feature default - * 15: Shall be ZERO - * 14: Shall be ONE - * 13:6 reserved - * 5: General Purpose Logging enabled - * 4: Valid CONFIGURE STREAM executed - * 3: Media Card Pass Through enabled - * 2: Media Serial Number Valid - * 1: SMART selt-test supported - * 0: SMART error logging - */ - unsigned short dma_ultra; /* (word 88) */ - unsigned short trseuc; /* time required for security erase */ - unsigned short trsEuc; /* time required for enhanced erase */ - unsigned short CurAPMvalues; /* current APM values */ - unsigned short mprc; /* master password revision code */ - unsigned short hw_config; /* hardware config (word 93) - * 15: Shall be ZERO - * 14: Shall be ONE - * 13: - * 12: - * 11: - * 10: - * 9: - * 8: - * 7: - * 6: - * 5: - * 4: - * 3: - * 2: - * 1: - * 0: Shall be ONE - */ - unsigned short acoustic; /* (word 94) - * 15:8 Vendor's recommended value - * 7:0 current value - */ - unsigned short msrqs; /* min stream request size */ - unsigned short sxfert; /* stream transfer time */ - unsigned short sal; /* stream access latency */ - unsigned int spg; /* stream performance granularity */ - unsigned long long lba_capacity_2;/* 48-bit total number of sectors */ - unsigned short words104_125[22];/* reserved words 104-125 */ - unsigned short last_lun; /* (word 126) */ - unsigned short word127; /* (word 127) Feature Set - * Removable Media Notification - * 15:2 reserved - * 1:0 00 = not supported - * 01 = supported - * 10 = reserved - * 11 = reserved - */ - unsigned short dlf; /* (word 128) - * device lock function - * 15:9 reserved - * 8 security level 1:max 0:high - * 7:6 reserved - * 5 enhanced erase - * 4 expire - * 3 frozen - * 2 locked - * 1 en/disabled - * 0 capability - */ - unsigned short csfo; /* (word 129) - * current set features options - * 15:4 reserved - * 3: auto reassign - * 2: reverting - * 1: read-look-ahead - * 0: write cache - */ - unsigned short words130_155[26];/* reserved vendor words 130-155 */ - unsigned short word156; /* reserved vendor word 156 */ - unsigned short words157_159[3];/* reserved vendor words 157-159 */ - unsigned short cfa_power; /* (word 160) CFA Power Mode - * 15 word 160 supported - * 14 reserved - * 13 - * 12 - * 11:0 - */ - unsigned short words161_175[15];/* Reserved for CFA */ - unsigned short words176_205[30];/* Current Media Serial Number */ - unsigned short words206_254[49];/* reserved words 206-254 */ - unsigned short integrity_word; /* (word 255) - * 15:8 Checksum - * 7:0 Signature - */ -}; -#endif /* __KERNEL__ */ - -/* - * IDE "nice" flags. These are used on a per drive basis to determine - * when to be nice and give more bandwidth to the other devices which - * share the same IDE bus. - */ -#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */ -#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */ -#define IDE_NICE_1 (3) /* when probably won't affect us much */ -#ifndef __KERNEL__ -#define IDE_NICE_0 (2) /* when sure that it won't affect us */ -#define IDE_NICE_2 (4) /* when we know it's on our expense */ -#endif - -#endif /* _LINUX_HDREG_H */ diff --git a/include/linux/hid.h b/include/linux/hid.h index 7e1f37db7582..c076041a069e 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1,12 +1,8 @@ -#ifndef __HID_H -#define __HID_H - /* * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2001 Vojtech Pavlik * Copyright (c) 2006-2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,43 +22,9 @@ * e-mail - mail your message to , or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ +#ifndef __HID_H +#define __HID_H -/* - * USB HID (Human Interface Device) interface class code - */ - -#define USB_INTERFACE_CLASS_HID 3 - -/* - * USB HID interface subclass and protocol codes - */ - -#define USB_INTERFACE_SUBCLASS_BOOT 1 -#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 -#define USB_INTERFACE_PROTOCOL_MOUSE 2 - -/* - * HID class requests - */ - -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B - -/* - * HID class descriptor types - */ - -#define HID_DT_HID (USB_TYPE_CLASS | 0x01) -#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) -#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) - -#define HID_MAX_DESCRIPTOR_SIZE 4096 - -#ifdef __KERNEL__ #include #include @@ -73,6 +35,7 @@ #include #include #include +#include /* * We parse each description item into this structure. Short items data @@ -943,7 +906,4 @@ do { \ #define hid_dbg(hid, fmt, arg...) \ dev_dbg(&(hid)->dev, fmt, ##arg) -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h index a3f481a3063b..a5dd8148660b 100644 --- a/include/linux/hiddev.h +++ b/include/linux/hiddev.h @@ -1,12 +1,8 @@ -#ifndef _HIDDEV_H -#define _HIDDEV_H - /* * Copyright (c) 1999-2000 Vojtech Pavlik * * Sponsored by SuSE */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,190 +22,11 @@ * e-mail - mail your message to , or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#ifndef _HIDDEV_H +#define _HIDDEV_H -#include - -/* - * The event structure itself - */ - -struct hiddev_event { - unsigned hid; - signed int value; -}; - -struct hiddev_devinfo { - __u32 bustype; - __u32 busnum; - __u32 devnum; - __u32 ifnum; - __s16 vendor; - __s16 product; - __s16 version; - __u32 num_applications; -}; - -struct hiddev_collection_info { - __u32 index; - __u32 type; - __u32 usage; - __u32 level; -}; - -#define HID_STRING_SIZE 256 -struct hiddev_string_descriptor { - __s32 index; - char value[HID_STRING_SIZE]; -}; - -struct hiddev_report_info { - __u32 report_type; - __u32 report_id; - __u32 num_fields; -}; - -/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and - * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields - * are unknown. Otherwise use a usage_ref struct filled in from a previous - * successful GUSAGE call to save time. To actually send a value to the - * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a - * GREPORT isn't necessary for a GUSAGE to return valid data. - */ -#define HID_REPORT_ID_UNKNOWN 0xffffffff -#define HID_REPORT_ID_FIRST 0x00000100 -#define HID_REPORT_ID_NEXT 0x00000200 -#define HID_REPORT_ID_MASK 0x000000ff -#define HID_REPORT_ID_MAX 0x000000ff - -#define HID_REPORT_TYPE_INPUT 1 -#define HID_REPORT_TYPE_OUTPUT 2 -#define HID_REPORT_TYPE_FEATURE 3 -#define HID_REPORT_TYPE_MIN 1 -#define HID_REPORT_TYPE_MAX 3 - -struct hiddev_field_info { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 maxusage; - __u32 flags; - __u32 physical; /* physical usage for this field */ - __u32 logical; /* logical usage for this field */ - __u32 application; /* application usage for this field */ - __s32 logical_minimum; - __s32 logical_maximum; - __s32 physical_minimum; - __s32 physical_maximum; - __u32 unit_exponent; - __u32 unit; -}; - -/* Fill in report_type, report_id and field_index to get the information on a - * field. - */ -#define HID_FIELD_CONSTANT 0x001 -#define HID_FIELD_VARIABLE 0x002 -#define HID_FIELD_RELATIVE 0x004 -#define HID_FIELD_WRAP 0x008 -#define HID_FIELD_NONLINEAR 0x010 -#define HID_FIELD_NO_PREFERRED 0x020 -#define HID_FIELD_NULL_STATE 0x040 -#define HID_FIELD_VOLATILE 0x080 -#define HID_FIELD_BUFFERED_BYTE 0x100 - -struct hiddev_usage_ref { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 usage_index; - __u32 usage_code; - __s32 value; -}; - -/* hiddev_usage_ref_multi is used for sending multiple bytes to a control. - * It really manifests itself as setting the value of consecutive usages */ -#define HID_MAX_MULTI_USAGES 1024 -struct hiddev_usage_ref_multi { - struct hiddev_usage_ref uref; - __u32 num_values; - __s32 values[HID_MAX_MULTI_USAGES]; -}; - -/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags - * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has - * been sent by the device - */ -#define HID_FIELD_INDEX_NONE 0xffffffff - -/* - * Protocol version. - */ - -#define HID_VERSION 0x010004 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -#define HIDIOCGVERSION _IOR('H', 0x01, int) -#define HIDIOCAPPLICATION _IO('H', 0x02) -#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo) -#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor) -#define HIDIOCINITREPORT _IO('H', 0x05) -#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len) -#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info) -#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info) -#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info) -#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info) -#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref) -#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref) -#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref) -#define HIDIOCGFLAG _IOR('H', 0x0E, int) -#define HIDIOCSFLAG _IOW('H', 0x0F, int) -#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref) -#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info) -#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len) - -/* For writing/reading to multiple/consecutive usages */ -#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi) -#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi) - -/* - * Flags to be used in HIDIOCSFLAG - */ -#define HIDDEV_FLAG_UREF 0x1 -#define HIDDEV_FLAG_REPORT 0x2 -#define HIDDEV_FLAGS 0x3 - -/* To traverse the input report descriptor info for a HID device, perform the - * following: - * - * rinfo.report_type = HID_REPORT_TYPE_INPUT; - * rinfo.report_id = HID_REPORT_ID_FIRST; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * - * while (ret >= 0) { - * for (i = 0; i < rinfo.num_fields; i++) { - * finfo.report_type = rinfo.report_type; - * finfo.report_id = rinfo.report_id; - * finfo.field_index = i; - * ioctl(fd, HIDIOCGFIELDINFO, &finfo); - * for (j = 0; j < finfo.maxusage; j++) { - * uref.report_type = rinfo.report_type; - * uref.report_id = rinfo.report_id; - * uref.field_index = i; - * uref.usage_index = j; - * ioctl(fd, HIDIOCGUCODE, &uref); - * ioctl(fd, HIDIOCGUSAGE, &uref); - * } - * } - * rinfo.report_id |= HID_REPORT_ID_NEXT; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * } - */ - +#include -#ifdef __KERNEL__ /* * In-kernel definitions. @@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report #endif #endif -#endif diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h index 45e9fcb8d877..2451662c728a 100644 --- a/include/linux/hidraw.h +++ b/include/linux/hidraw.h @@ -1,10 +1,6 @@ -#ifndef _HIDRAW_H -#define _HIDRAW_H - /* * Copyright (c) 2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -14,39 +10,11 @@ * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef _HIDRAW_H +#define _HIDRAW_H -#include -#include - -struct hidraw_report_descriptor { - __u32 size; - __u8 value[HID_MAX_DESCRIPTOR_SIZE]; -}; - -struct hidraw_devinfo { - __u32 bustype; - __s16 vendor; - __s16 product; -}; - -/* ioctl interface */ -#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int) -#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor) -#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo) -#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len) -#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len) -/* The first byte of SFEATURE and GFEATURE is the report number */ -#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) -#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) - -#define HIDRAW_FIRST_MINOR 0 -#define HIDRAW_MAX_DEVICES 64 -/* number of reports to buffer */ -#define HIDRAW_BUFFER_SIZE 64 - +#include -/* kernel-only API declarations */ -#ifdef __KERNEL__ struct hidraw { unsigned int minor; @@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { } #endif #endif - -#endif diff --git a/include/linux/hpet.h b/include/linux/hpet.h index 219ca4f6bea6..9427ab4e01c3 100644 --- a/include/linux/hpet.h +++ b/include/linux/hpet.h @@ -1,9 +1,8 @@ #ifndef __HPET__ #define __HPET__ 1 -#include +#include -#ifdef __KERNEL__ /* * Offsets into HPET Registers @@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer) int hpet_alloc(struct hpet_data *); -#endif /* __KERNEL__ */ - -struct hpet_info { - unsigned long hi_ireqfreq; /* Hz */ - unsigned long hi_flags; /* information */ - unsigned short hi_hpet; - unsigned short hi_timer; -}; - -#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */ - -#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */ -#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */ -#define HPET_INFO _IOR('h', 0x03, struct hpet_info) -#define HPET_EPI _IO('h', 0x04) /* enable periodic */ -#define HPET_DPI _IO('h', 0x05) /* disable periodic */ -#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */ - -#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */ - #endif /* !__HPET__ */ diff --git a/include/linux/hysdn_if.h b/include/linux/hysdn_if.h deleted file mode 100644 index 00236ae3b04e..000000000000 --- a/include/linux/hysdn_if.h +++ /dev/null @@ -1,33 +0,0 @@ -/* $Id: hysdn_if.h,v 1.1.8.3 2001/09/23 22:25:05 kai Exp $ - * - * Linux driver for HYSDN cards - * ioctl definitions shared by hynetmgr and driver. - * - * Author Werner Cornelius (werner@titro.de) for Hypercope GmbH - * Copyright 1999 by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -/****************/ -/* error values */ -/****************/ -#define ERR_NONE 0 /* no error occurred */ -#define ERR_ALREADY_BOOT 1000 /* we are already booting */ -#define EPOF_BAD_MAGIC 1001 /* bad magic in POF header */ -#define ERR_BOARD_DPRAM 1002 /* board DPRAM failed */ -#define EPOF_INTERNAL 1003 /* internal POF handler error */ -#define EPOF_BAD_IMG_SIZE 1004 /* POF boot image size invalid */ -#define ERR_BOOTIMG_FAIL 1005 /* 1. stage boot image did not start */ -#define ERR_BOOTSEQ_FAIL 1006 /* 2. stage boot seq handshake timeout */ -#define ERR_POF_TIMEOUT 1007 /* timeout waiting for card pof ready */ -#define ERR_NOT_BOOTED 1008 /* operation only allowed when booted */ -#define ERR_CONF_LONG 1009 /* conf line is too long */ -#define ERR_INV_CHAN 1010 /* invalid channel number */ -#define ERR_ASYNC_TIME 1011 /* timeout sending async data */ - - - - diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 8a7406b2114d..79727144c5cd 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -19,57 +19,10 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ - #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H -#include -#include - -/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an - * unsigned long, except for: - * - I2C_FUNCS, takes pointer to an unsigned long - * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data - * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data - */ -#define I2C_RETRIES 0x0701 /* number of times a device address should - be polled when not acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ - -/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses - * are NOT supported! (due to code brokenness) - */ -#define I2C_SLAVE 0x0703 /* Use this slave address */ -#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it - is already in use by a driver! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ - -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ - -#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ -#define I2C_SMBUS 0x0720 /* SMBus transfer */ +#include - -/* This is the structure as used in the I2C_SMBUS ioctl call */ -struct i2c_smbus_ioctl_data { - __u8 read_write; - __u8 command; - __u32 size; - union i2c_smbus_data __user *data; -}; - -/* This is the structure as used in the I2C_RDWR ioctl call */ -struct i2c_rdwr_ioctl_data { - struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ - __u32 nmsgs; /* number of i2c_msgs */ -}; - -#define I2C_RDRW_IOCTL_MAX_MSGS 42 - -#ifdef __KERNEL__ #define I2C_MAJOR 89 /* Device major number */ -#endif - #endif /* _LINUX_I2C_DEV_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 94aed0c85bb0..800de224336b 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -23,18 +23,16 @@ /* With some changes from Kyösti Mälkki and Frodo Looijaard */ - #ifndef _LINUX_I2C_H #define _LINUX_I2C_H -#include -#ifdef __KERNEL__ #include #include /* for struct device */ #include /* for completion */ #include #include /* for struct device_node */ #include /* for swab16 */ +#include extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; @@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ -#endif /* __KERNEL__ */ - -/** - * struct i2c_msg - an I2C transaction segment beginning with START - * @addr: Slave address, either seven or ten bits. When this is a ten - * bit address, I2C_M_TEN must be set in @flags and the adapter - * must support I2C_FUNC_10BIT_ADDR. - * @flags: I2C_M_RD is handled by all adapters. No other flags may be - * provided unless the adapter exported the relevant I2C_FUNC_* - * flags through i2c_check_functionality(). - * @len: Number of data bytes in @buf being read from or written to the - * I2C slave address. For read transactions where I2C_M_RECV_LEN - * is set, the caller guarantees that this buffer can hold up to - * 32 bytes in addition to the initial length byte sent by the - * slave (plus, if used, the SMBus PEC); and this value will be - * incremented by the number of block data bytes received. - * @buf: The buffer into which data is read, or from which it's written. - * - * An i2c_msg is the low level representation of one segment of an I2C - * transaction. It is visible to drivers in the @i2c_transfer() procedure, - * to userspace from i2c-dev, and to I2C adapter drivers through the - * @i2c_adapter.@master_xfer() method. - * - * Except when I2C "protocol mangling" is used, all I2C adapters implement - * the standard rules for I2C transactions. Each transaction begins with a - * START. That is followed by the slave address, and a bit encoding read - * versus write. Then follow all the data bytes, possibly including a byte - * with SMBus PEC. The transfer terminates with a NAK, or when all those - * bytes have been transferred and ACKed. If this is the last message in a - * group, it is followed by a STOP. Otherwise it is followed by the next - * @i2c_msg transaction segment, beginning with a (repeated) START. - * - * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then - * passing certain @flags may have changed those standard protocol behaviors. - * Those flags are only for use with broken/nonconforming slaves, and with - * adapters which are known to support the specific mangling options they - * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). - */ -struct i2c_msg { - __u16 addr; /* slave address */ - __u16 flags; -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_RD 0x0001 /* read data, from slave to master */ -#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ -#define I2C_FUNC_SMBUS_PEC 0x00000008 -#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ - -#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE) -#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA) -#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA) -#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) -#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) - -#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK | \ - I2C_FUNC_SMBUS_PEC) - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for user-space compatibility */ -}; - -/* i2c_smbus_xfer read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_I2C_BLOCK_DATA 8 - #endif /* _LINUX_I2C_H */ diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h deleted file mode 100644 index a8093bfec3a6..000000000000 --- a/include/linux/i2o-dev.h +++ /dev/null @@ -1,421 +0,0 @@ -/* - * I2O user space accessible structures/APIs - * - * (c) Copyright 1999, 2000 Red Hat Software - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - ************************************************************************* - * - * This header file defines the I2O APIs that are available to both - * the kernel and user level applications. Kernel specific structures - * are defined in i2o_osm. OSMs should include _only_ i2o_osm.h which - * automatically includes this file. - * - */ - -#ifndef _I2O_DEV_H -#define _I2O_DEV_H - -/* How many controllers are we allowing */ -#define MAX_I2O_CONTROLLERS 32 - -#include -#include - -/* - * I2O Control IOCTLs and structures - */ -#define I2O_MAGIC_NUMBER 'i' -#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS]) -#define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct) -#define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct) -#define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget) -#define I2OPARMGET _IOWR(I2O_MAGIC_NUMBER,4,struct i2o_cmd_psetget) -#define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer) -#define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer) -#define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer) -#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32) -#define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html) -#define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id) -#define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info) -#define I2OPASSTHRU _IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru) -#define I2OPASSTHRU32 _IOR(I2O_MAGIC_NUMBER,12,struct i2o_cmd_passthru32) - -struct i2o_cmd_passthru32 { - unsigned int iop; /* IOP unit number */ - __u32 msg; /* message */ -}; - -struct i2o_cmd_passthru { - unsigned int iop; /* IOP unit number */ - void __user *msg; /* message */ -}; - -struct i2o_cmd_hrtlct { - unsigned int iop; /* IOP unit number */ - void __user *resbuf; /* Buffer for result */ - unsigned int __user *reslen; /* Buffer length in bytes */ -}; - -struct i2o_cmd_psetget { - unsigned int iop; /* IOP unit number */ - unsigned int tid; /* Target device TID */ - void __user *opbuf; /* Operation List buffer */ - unsigned int oplen; /* Operation List buffer length in bytes */ - void __user *resbuf; /* Result List buffer */ - unsigned int __user *reslen; /* Result List buffer length in bytes */ -}; - -struct i2o_sw_xfer { - unsigned int iop; /* IOP unit number */ - unsigned char flags; /* Flags field */ - unsigned char sw_type; /* Software type */ - unsigned int sw_id; /* Software ID */ - void __user *buf; /* Pointer to software buffer */ - unsigned int __user *swlen; /* Length of software data */ - unsigned int __user *maxfrag; /* Maximum fragment count */ - unsigned int __user *curfrag; /* Current fragment count */ -}; - -struct i2o_html { - unsigned int iop; /* IOP unit number */ - unsigned int tid; /* Target device ID */ - unsigned int page; /* HTML page */ - void __user *resbuf; /* Buffer for reply HTML page */ - unsigned int __user *reslen; /* Length in bytes of reply buffer */ - void __user *qbuf; /* Pointer to HTTP query string */ - unsigned int qlen; /* Length in bytes of query string buffer */ -}; - -#define I2O_EVT_Q_LEN 32 - -struct i2o_evt_id { - unsigned int iop; - unsigned int tid; - unsigned int evt_mask; -}; - -/* Event data size = frame size - message header + evt indicator */ -#define I2O_EVT_DATA_SIZE 88 - -struct i2o_evt_info { - struct i2o_evt_id id; - unsigned char evt_data[I2O_EVT_DATA_SIZE]; - unsigned int data_size; -}; - -struct i2o_evt_get { - struct i2o_evt_info info; - int pending; - int lost; -}; - -typedef struct i2o_sg_io_hdr { - unsigned int flags; /* see I2O_DPT_SG_IO_FLAGS */ -} i2o_sg_io_hdr_t; - -/************************************************************************** - * HRT related constants and structures - **************************************************************************/ -#define I2O_BUS_LOCAL 0 -#define I2O_BUS_ISA 1 -#define I2O_BUS_EISA 2 -/* was I2O_BUS_MCA 3 */ -#define I2O_BUS_PCI 4 -#define I2O_BUS_PCMCIA 5 -#define I2O_BUS_NUBUS 6 -#define I2O_BUS_CARDBUS 7 -#define I2O_BUS_UNKNOWN 0x80 - -typedef struct _i2o_pci_bus { - __u8 PciFunctionNumber; - __u8 PciDeviceNumber; - __u8 PciBusNumber; - __u8 reserved; - __u16 PciVendorID; - __u16 PciDeviceID; -} i2o_pci_bus; - -typedef struct _i2o_local_bus { - __u16 LbBaseIOPort; - __u16 reserved; - __u32 LbBaseMemoryAddress; -} i2o_local_bus; - -typedef struct _i2o_isa_bus { - __u16 IsaBaseIOPort; - __u8 CSN; - __u8 reserved; - __u32 IsaBaseMemoryAddress; -} i2o_isa_bus; - -typedef struct _i2o_eisa_bus_info { - __u16 EisaBaseIOPort; - __u8 reserved; - __u8 EisaSlotNumber; - __u32 EisaBaseMemoryAddress; -} i2o_eisa_bus; - -typedef struct _i2o_mca_bus { - __u16 McaBaseIOPort; - __u8 reserved; - __u8 McaSlotNumber; - __u32 McaBaseMemoryAddress; -} i2o_mca_bus; - -typedef struct _i2o_other_bus { - __u16 BaseIOPort; - __u16 reserved; - __u32 BaseMemoryAddress; -} i2o_other_bus; - -typedef struct _i2o_hrt_entry { - __u32 adapter_id; - __u32 parent_tid:12; - __u32 state:4; - __u32 bus_num:8; - __u32 bus_type:8; - union { - i2o_pci_bus pci_bus; - i2o_local_bus local_bus; - i2o_isa_bus isa_bus; - i2o_eisa_bus eisa_bus; - i2o_mca_bus mca_bus; - i2o_other_bus other_bus; - } bus; -} i2o_hrt_entry; - -typedef struct _i2o_hrt { - __u16 num_entries; - __u8 entry_len; - __u8 hrt_version; - __u32 change_ind; - i2o_hrt_entry hrt_entry[1]; -} i2o_hrt; - -typedef struct _i2o_lct_entry { - __u32 entry_size:16; - __u32 tid:12; - __u32 reserved:4; - __u32 change_ind; - __u32 device_flags; - __u32 class_id:12; - __u32 version:4; - __u32 vendor_id:16; - __u32 sub_class; - __u32 user_tid:12; - __u32 parent_tid:12; - __u32 bios_info:8; - __u8 identity_tag[8]; - __u32 event_capabilities; -} i2o_lct_entry; - -typedef struct _i2o_lct { - __u32 table_size:16; - __u32 boot_tid:12; - __u32 lct_ver:4; - __u32 iop_flags; - __u32 change_ind; - i2o_lct_entry lct_entry[1]; -} i2o_lct; - -typedef struct _i2o_status_block { - __u16 org_id; - __u16 reserved; - __u16 iop_id:12; - __u16 reserved1:4; - __u16 host_unit_id; - __u16 segment_number:12; - __u16 i2o_version:4; - __u8 iop_state; - __u8 msg_type; - __u16 inbound_frame_size; - __u8 init_code; - __u8 reserved2; - __u32 max_inbound_frames; - __u32 cur_inbound_frames; - __u32 max_outbound_frames; - char product_id[24]; - __u32 expected_lct_size; - __u32 iop_capabilities; - __u32 desired_mem_size; - __u32 current_mem_size; - __u32 current_mem_base; - __u32 desired_io_size; - __u32 current_io_size; - __u32 current_io_base; - __u32 reserved3:24; - __u32 cmd_status:8; -} i2o_status_block; - -/* Event indicator mask flags */ -#define I2O_EVT_IND_STATE_CHANGE 0x80000000 -#define I2O_EVT_IND_GENERAL_WARNING 0x40000000 -#define I2O_EVT_IND_CONFIGURATION_FLAG 0x20000000 -#define I2O_EVT_IND_LOCK_RELEASE 0x10000000 -#define I2O_EVT_IND_CAPABILITY_CHANGE 0x08000000 -#define I2O_EVT_IND_DEVICE_RESET 0x04000000 -#define I2O_EVT_IND_EVT_MASK_MODIFIED 0x02000000 -#define I2O_EVT_IND_FIELD_MODIFIED 0x01000000 -#define I2O_EVT_IND_VENDOR_EVT 0x00800000 -#define I2O_EVT_IND_DEVICE_STATE 0x00400000 - -/* Executive event indicitors */ -#define I2O_EVT_IND_EXEC_RESOURCE_LIMITS 0x00000001 -#define I2O_EVT_IND_EXEC_CONNECTION_FAIL 0x00000002 -#define I2O_EVT_IND_EXEC_ADAPTER_FAULT 0x00000004 -#define I2O_EVT_IND_EXEC_POWER_FAIL 0x00000008 -#define I2O_EVT_IND_EXEC_RESET_PENDING 0x00000010 -#define I2O_EVT_IND_EXEC_RESET_IMMINENT 0x00000020 -#define I2O_EVT_IND_EXEC_HW_FAIL 0x00000040 -#define I2O_EVT_IND_EXEC_XCT_CHANGE 0x00000080 -#define I2O_EVT_IND_EXEC_NEW_LCT_ENTRY 0x00000100 -#define I2O_EVT_IND_EXEC_MODIFIED_LCT 0x00000200 -#define I2O_EVT_IND_EXEC_DDM_AVAILABILITY 0x00000400 - -/* Random Block Storage Event Indicators */ -#define I2O_EVT_IND_BSA_VOLUME_LOAD 0x00000001 -#define I2O_EVT_IND_BSA_VOLUME_UNLOAD 0x00000002 -#define I2O_EVT_IND_BSA_VOLUME_UNLOAD_REQ 0x00000004 -#define I2O_EVT_IND_BSA_CAPACITY_CHANGE 0x00000008 -#define I2O_EVT_IND_BSA_SCSI_SMART 0x00000010 - -/* Event data for generic events */ -#define I2O_EVT_STATE_CHANGE_NORMAL 0x00 -#define I2O_EVT_STATE_CHANGE_SUSPENDED 0x01 -#define I2O_EVT_STATE_CHANGE_RESTART 0x02 -#define I2O_EVT_STATE_CHANGE_NA_RECOVER 0x03 -#define I2O_EVT_STATE_CHANGE_NA_NO_RECOVER 0x04 -#define I2O_EVT_STATE_CHANGE_QUIESCE_REQUEST 0x05 -#define I2O_EVT_STATE_CHANGE_FAILED 0x10 -#define I2O_EVT_STATE_CHANGE_FAULTED 0x11 - -#define I2O_EVT_GEN_WARNING_NORMAL 0x00 -#define I2O_EVT_GEN_WARNING_ERROR_THRESHOLD 0x01 -#define I2O_EVT_GEN_WARNING_MEDIA_FAULT 0x02 - -#define I2O_EVT_CAPABILITY_OTHER 0x01 -#define I2O_EVT_CAPABILITY_CHANGED 0x02 - -#define I2O_EVT_SENSOR_STATE_CHANGED 0x01 - -/* - * I2O classes / subclasses - */ - -/* Class ID and Code Assignments - * (LCT.ClassID.Version field) - */ -#define I2O_CLASS_VERSION_10 0x00 -#define I2O_CLASS_VERSION_11 0x01 - -/* Class code names - * (from v1.5 Table 6-1 Class Code Assignments.) - */ - -#define I2O_CLASS_EXECUTIVE 0x000 -#define I2O_CLASS_DDM 0x001 -#define I2O_CLASS_RANDOM_BLOCK_STORAGE 0x010 -#define I2O_CLASS_SEQUENTIAL_STORAGE 0x011 -#define I2O_CLASS_LAN 0x020 -#define I2O_CLASS_WAN 0x030 -#define I2O_CLASS_FIBRE_CHANNEL_PORT 0x040 -#define I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL 0x041 -#define I2O_CLASS_SCSI_PERIPHERAL 0x051 -#define I2O_CLASS_ATE_PORT 0x060 -#define I2O_CLASS_ATE_PERIPHERAL 0x061 -#define I2O_CLASS_FLOPPY_CONTROLLER 0x070 -#define I2O_CLASS_FLOPPY_DEVICE 0x071 -#define I2O_CLASS_BUS_ADAPTER 0x080 -#define I2O_CLASS_PEER_TRANSPORT_AGENT 0x090 -#define I2O_CLASS_PEER_TRANSPORT 0x091 -#define I2O_CLASS_END 0xfff - -/* - * Rest of 0x092 - 0x09f reserved for peer-to-peer classes - */ - -#define I2O_CLASS_MATCH_ANYCLASS 0xffffffff - -/* - * Subclasses - */ - -#define I2O_SUBCLASS_i960 0x001 -#define I2O_SUBCLASS_HDM 0x020 -#define I2O_SUBCLASS_ISM 0x021 - -/* Operation functions */ - -#define I2O_PARAMS_FIELD_GET 0x0001 -#define I2O_PARAMS_LIST_GET 0x0002 -#define I2O_PARAMS_MORE_GET 0x0003 -#define I2O_PARAMS_SIZE_GET 0x0004 -#define I2O_PARAMS_TABLE_GET 0x0005 -#define I2O_PARAMS_FIELD_SET 0x0006 -#define I2O_PARAMS_LIST_SET 0x0007 -#define I2O_PARAMS_ROW_ADD 0x0008 -#define I2O_PARAMS_ROW_DELETE 0x0009 -#define I2O_PARAMS_TABLE_CLEAR 0x000A - -/* - * I2O serial number conventions / formats - * (circa v1.5) - */ - -#define I2O_SNFORMAT_UNKNOWN 0 -#define I2O_SNFORMAT_BINARY 1 -#define I2O_SNFORMAT_ASCII 2 -#define I2O_SNFORMAT_UNICODE 3 -#define I2O_SNFORMAT_LAN48_MAC 4 -#define I2O_SNFORMAT_WAN 5 - -/* - * Plus new in v2.0 (Yellowstone pdf doc) - */ - -#define I2O_SNFORMAT_LAN64_MAC 6 -#define I2O_SNFORMAT_DDM 7 -#define I2O_SNFORMAT_IEEE_REG64 8 -#define I2O_SNFORMAT_IEEE_REG128 9 -#define I2O_SNFORMAT_UNKNOWN2 0xff - -/* - * I2O Get Status State values - */ - -#define ADAPTER_STATE_INITIALIZING 0x01 -#define ADAPTER_STATE_RESET 0x02 -#define ADAPTER_STATE_HOLD 0x04 -#define ADAPTER_STATE_READY 0x05 -#define ADAPTER_STATE_OPERATIONAL 0x08 -#define ADAPTER_STATE_FAILED 0x10 -#define ADAPTER_STATE_FAULTED 0x11 - -/* - * Software module types - */ -#define I2O_SOFTWARE_MODULE_IRTOS 0x11 -#define I2O_SOFTWARE_MODULE_IOP_PRIVATE 0x22 -#define I2O_SOFTWARE_MODULE_IOP_CONFIG 0x23 - -/* - * Vendors - */ -#define I2O_VENDOR_DPT 0x001b - -/* - * DPT / Adaptec specific values for i2o_sg_io_hdr flags. - */ -#define I2O_DPT_SG_FLAG_INTERPRET 0x00010000 -#define I2O_DPT_SG_FLAG_PHYSICAL 0x00020000 - -#define I2O_DPT_FLASH_FRAG_SIZE 0x10000 -#define I2O_DPT_FLASH_READ 0x0101 -#define I2O_DPT_FLASH_WRITE 0x0102 - -#endif /* _I2O_DEV_H */ diff --git a/include/linux/i8k.h b/include/linux/i8k.h deleted file mode 100644 index 1c45ba505115..000000000000 --- a/include/linux/i8k.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * i8k.h -- Linux driver for accessing the SMM BIOS on Dell laptops - * - * Copyright (C) 2001 Massimo Dal Zotto - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#ifndef _LINUX_I8K_H -#define _LINUX_I8K_H - -#define I8K_PROC "/proc/i8k" -#define I8K_PROC_FMT "1.0" - -#define I8K_BIOS_VERSION _IOR ('i', 0x80, int) /* broken: meant 4 bytes */ -#define I8K_MACHINE_ID _IOR ('i', 0x81, int) /* broken: meant 16 bytes */ -#define I8K_POWER_STATUS _IOR ('i', 0x82, size_t) -#define I8K_FN_STATUS _IOR ('i', 0x83, size_t) -#define I8K_GET_TEMP _IOR ('i', 0x84, size_t) -#define I8K_GET_SPEED _IOWR('i', 0x85, size_t) -#define I8K_GET_FAN _IOWR('i', 0x86, size_t) -#define I8K_SET_FAN _IOWR('i', 0x87, size_t) - -#define I8K_FAN_LEFT 1 -#define I8K_FAN_RIGHT 0 -#define I8K_FAN_OFF 0 -#define I8K_FAN_LOW 1 -#define I8K_FAN_HIGH 2 -#define I8K_FAN_MAX I8K_FAN_HIGH - -#define I8K_VOL_UP 1 -#define I8K_VOL_DOWN 2 -#define I8K_VOL_MUTE 4 - -#define I8K_AC 1 -#define I8K_BATTERY 0 - -#endif diff --git a/include/linux/icmp.h b/include/linux/icmp.h index 474f2a51cf0a..efc18490627a 100644 --- a/include/linux/icmp.h +++ b/include/linux/icmp.h @@ -17,89 +17,11 @@ #ifndef _LINUX_ICMP_H #define _LINUX_ICMP_H -#include - -#define ICMP_ECHOREPLY 0 /* Echo Reply */ -#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ -#define ICMP_SOURCE_QUENCH 4 /* Source Quench */ -#define ICMP_REDIRECT 5 /* Redirect (change route) */ -#define ICMP_ECHO 8 /* Echo Request */ -#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */ -#define ICMP_PARAMETERPROB 12 /* Parameter Problem */ -#define ICMP_TIMESTAMP 13 /* Timestamp Request */ -#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */ -#define ICMP_INFO_REQUEST 15 /* Information Request */ -#define ICMP_INFO_REPLY 16 /* Information Reply */ -#define ICMP_ADDRESS 17 /* Address Mask Request */ -#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */ -#define NR_ICMP_TYPES 18 - - -/* Codes for UNREACH. */ -#define ICMP_NET_UNREACH 0 /* Network Unreachable */ -#define ICMP_HOST_UNREACH 1 /* Host Unreachable */ -#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */ -#define ICMP_PORT_UNREACH 3 /* Port Unreachable */ -#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */ -#define ICMP_SR_FAILED 5 /* Source Route failed */ -#define ICMP_NET_UNKNOWN 6 -#define ICMP_HOST_UNKNOWN 7 -#define ICMP_HOST_ISOLATED 8 -#define ICMP_NET_ANO 9 -#define ICMP_HOST_ANO 10 -#define ICMP_NET_UNR_TOS 11 -#define ICMP_HOST_UNR_TOS 12 -#define ICMP_PKT_FILTERED 13 /* Packet filtered */ -#define ICMP_PREC_VIOLATION 14 /* Precedence violation */ -#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */ -#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */ - -/* Codes for REDIRECT. */ -#define ICMP_REDIR_NET 0 /* Redirect Net */ -#define ICMP_REDIR_HOST 1 /* Redirect Host */ -#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */ -#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */ - -/* Codes for TIME_EXCEEDED. */ -#define ICMP_EXC_TTL 0 /* TTL count exceeded */ -#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ - - -struct icmphdr { - __u8 type; - __u8 code; - __sum16 checksum; - union { - struct { - __be16 id; - __be16 sequence; - } echo; - __be32 gateway; - struct { - __be16 __unused; - __be16 mtu; - } frag; - } un; -}; - -#ifdef __KERNEL__ #include +#include static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb) { return (struct icmphdr *)skb_transport_header(skb); } -#endif - -/* - * constants for (set|get)sockopt - */ - -#define ICMP_FILTER 1 - -struct icmp_filter { - __u32 data; -}; - - #endif /* _LINUX_ICMP_H */ diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index ba45e6bc0764..b4f6c29caced 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -1,174 +1,13 @@ #ifndef _LINUX_ICMPV6_H #define _LINUX_ICMPV6_H -#include -#include - -struct icmp6hdr { - - __u8 icmp6_type; - __u8 icmp6_code; - __sum16 icmp6_cksum; - - - union { - __be32 un_data32[1]; - __be16 un_data16[2]; - __u8 un_data8[4]; - - struct icmpv6_echo { - __be16 identifier; - __be16 sequence; - } u_echo; - - struct icmpv6_nd_advt { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u32 reserved:5, - override:1, - solicited:1, - router:1, - reserved2:24; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u32 router:1, - solicited:1, - override:1, - reserved:29; -#else -#error "Please fix " -#endif - } u_nd_advt; - - struct icmpv6_nd_ra { - __u8 hop_limit; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 reserved:3, - router_pref:2, - home_agent:1, - other:1, - managed:1; - -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 managed:1, - other:1, - home_agent:1, - router_pref:2, - reserved:3; -#else -#error "Please fix " -#endif - __be16 rt_lifetime; - } u_nd_ra; - - } icmp6_dataun; - -#define icmp6_identifier icmp6_dataun.u_echo.identifier -#define icmp6_sequence icmp6_dataun.u_echo.sequence -#define icmp6_pointer icmp6_dataun.un_data32[0] -#define icmp6_mtu icmp6_dataun.un_data32[0] -#define icmp6_unused icmp6_dataun.un_data32[0] -#define icmp6_maxdelay icmp6_dataun.un_data16[0] -#define icmp6_router icmp6_dataun.u_nd_advt.router -#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited -#define icmp6_override icmp6_dataun.u_nd_advt.override -#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved -#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit -#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed -#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other -#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime -#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref -}; - -#ifdef __KERNEL__ #include +#include static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb) { return (struct icmp6hdr *)skb_transport_header(skb); } -#endif - -#define ICMPV6_ROUTER_PREF_LOW 0x3 -#define ICMPV6_ROUTER_PREF_MEDIUM 0x0 -#define ICMPV6_ROUTER_PREF_HIGH 0x1 -#define ICMPV6_ROUTER_PREF_INVALID 0x2 - -#define ICMPV6_DEST_UNREACH 1 -#define ICMPV6_PKT_TOOBIG 2 -#define ICMPV6_TIME_EXCEED 3 -#define ICMPV6_PARAMPROB 4 - -#define ICMPV6_INFOMSG_MASK 0x80 - -#define ICMPV6_ECHO_REQUEST 128 -#define ICMPV6_ECHO_REPLY 129 -#define ICMPV6_MGM_QUERY 130 -#define ICMPV6_MGM_REPORT 131 -#define ICMPV6_MGM_REDUCTION 132 - -#define ICMPV6_NI_QUERY 139 -#define ICMPV6_NI_REPLY 140 - -#define ICMPV6_MLD2_REPORT 143 - -#define ICMPV6_DHAAD_REQUEST 144 -#define ICMPV6_DHAAD_REPLY 145 -#define ICMPV6_MOBILE_PREFIX_SOL 146 -#define ICMPV6_MOBILE_PREFIX_ADV 147 - -/* - * Codes for Destination Unreachable - */ -#define ICMPV6_NOROUTE 0 -#define ICMPV6_ADM_PROHIBITED 1 -#define ICMPV6_NOT_NEIGHBOUR 2 -#define ICMPV6_ADDR_UNREACH 3 -#define ICMPV6_PORT_UNREACH 4 - -/* - * Codes for Time Exceeded - */ -#define ICMPV6_EXC_HOPLIMIT 0 -#define ICMPV6_EXC_FRAGTIME 1 - -/* - * Codes for Parameter Problem - */ -#define ICMPV6_HDR_FIELD 0 -#define ICMPV6_UNK_NEXTHDR 1 -#define ICMPV6_UNK_OPTION 2 - -/* - * constants for (set|get)sockopt - */ - -#define ICMPV6_FILTER 1 - -/* - * ICMPV6 filter - */ - -#define ICMPV6_FILTER_BLOCK 1 -#define ICMPV6_FILTER_PASS 2 -#define ICMPV6_FILTER_BLOCKOTHERS 3 -#define ICMPV6_FILTER_PASSONLY 4 - -struct icmp6_filter { - __u32 data[8]; -}; - -/* - * Definitions for MLDv2 - */ -#define MLD2_MODE_IS_INCLUDE 1 -#define MLD2_MODE_IS_EXCLUDE 2 -#define MLD2_CHANGE_TO_INCLUDE 3 -#define MLD2_CHANGE_TO_EXCLUDE 4 -#define MLD2_ALLOW_NEW_SOURCES 5 -#define MLD2_BLOCK_OLD_SOURCES 6 - -#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } } - -#ifdef __KERNEL__ #include @@ -192,5 +31,3 @@ extern void icmpv6_flow_init(struct sock *sk, const struct in6_addr *daddr, int oif); #endif - -#endif diff --git a/include/linux/if.h b/include/linux/if.h deleted file mode 100644 index 1ec407b01e46..000000000000 --- a/include/linux/if.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the INET interface module. - * - * Version: @(#)if.h 1.0.2 04/18/93 - * - * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 - * Ross Biro - * Fred N. van Kempen, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _LINUX_IF_H -#define _LINUX_IF_H - -#include /* for "__kernel_caddr_t" et al */ -#include /* for "struct sockaddr" et al */ -#include /* for "__user" et al */ - -#define IFNAMSIZ 16 -#define IFALIASZ 256 -#include - -/* Standard interface flags (netdevice->flags). */ -#define IFF_UP 0x1 /* interface is up */ -#define IFF_BROADCAST 0x2 /* broadcast address valid */ -#define IFF_DEBUG 0x4 /* turn on debugging */ -#define IFF_LOOPBACK 0x8 /* is a loopback net */ -#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */ -#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */ -#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */ -#define IFF_NOARP 0x80 /* no ARP protocol */ -#define IFF_PROMISC 0x100 /* receive all packets */ -#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/ - -#define IFF_MASTER 0x400 /* master of a load balancer */ -#define IFF_SLAVE 0x800 /* slave of a load balancer */ - -#define IFF_MULTICAST 0x1000 /* Supports multicast */ - -#define IFF_PORTSEL 0x2000 /* can set media type */ -#define IFF_AUTOMEDIA 0x4000 /* auto media select active */ -#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/ - -#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */ -#define IFF_DORMANT 0x20000 /* driver signals dormant */ - -#define IFF_ECHO 0x40000 /* echo sent packets */ - -#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ - IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT) - -/* Private (from user) interface flags (netdevice->priv_flags). */ -#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */ -#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */ -#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */ -#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */ -#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */ -#define IFF_BONDING 0x20 /* bonding master or slave */ -#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ -#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ -#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ -#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ -#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to - * release skb->dst - */ -#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ -#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */ -#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */ -#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */ -#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch - * datapath port */ -#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing - * skbs on transmit */ -#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ -#define IFF_TEAM_PORT 0x40000 /* device used as team port */ -#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ -#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address - * change when it's running */ - - -#define IF_GET_IFACE 0x0001 /* for querying only */ -#define IF_GET_PROTO 0x0002 - -/* For definitions see hdlc.h */ -#define IF_IFACE_V35 0x1000 /* V.35 serial interface */ -#define IF_IFACE_V24 0x1001 /* V.24 serial interface */ -#define IF_IFACE_X21 0x1002 /* X.21 serial interface */ -#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */ -#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */ -#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */ -#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */ - -/* For definitions see hdlc.h */ -#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */ -#define IF_PROTO_PPP 0x2001 /* PPP protocol */ -#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */ -#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */ -#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */ -#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */ -#define IF_PROTO_X25 0x2006 /* X.25 */ -#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */ -#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */ -#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */ -#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */ -#define IF_PROTO_FR_ETH_PVC 0x200B -#define IF_PROTO_RAW 0x200C /* RAW Socket */ - -/* RFC 2863 operational status */ -enum { - IF_OPER_UNKNOWN, - IF_OPER_NOTPRESENT, - IF_OPER_DOWN, - IF_OPER_LOWERLAYERDOWN, - IF_OPER_TESTING, - IF_OPER_DORMANT, - IF_OPER_UP, -}; - -/* link modes */ -enum { - IF_LINK_MODE_DEFAULT, - IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ -}; - -/* - * Device mapping structure. I'd just gone off and designed a - * beautiful scheme using only loadable modules with arguments - * for driver options and along come the PCMCIA people 8) - * - * Ah well. The get() side of this is good for WDSETUP, and it'll - * be handy for debugging things. The set side is fine for now and - * being very small might be worth keeping for clean configuration. - */ - -struct ifmap { - unsigned long mem_start; - unsigned long mem_end; - unsigned short base_addr; - unsigned char irq; - unsigned char dma; - unsigned char port; - /* 3 bytes spare */ -}; - -struct if_settings { - unsigned int type; /* Type of physical device or protocol */ - unsigned int size; /* Size of the data allocated by the caller */ - union { - /* {atm/eth/dsl}_settings anyone ? */ - raw_hdlc_proto __user *raw_hdlc; - cisco_proto __user *cisco; - fr_proto __user *fr; - fr_proto_pvc __user *fr_pvc; - fr_proto_pvc_info __user *fr_pvc_info; - - /* interface settings */ - sync_serial_settings __user *sync; - te1_settings __user *te1; - } ifs_ifsu; -}; - -/* - * Interface request structure used for socket - * ioctl's. All interface ioctl's must have parameter - * definitions which begin with ifr_name. The - * remainder may be interface specific. - */ - -struct ifreq { -#define IFHWADDRLEN 6 - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ - } ifr_ifrn; - - union { - struct sockaddr ifru_addr; - struct sockaddr ifru_dstaddr; - struct sockaddr ifru_broadaddr; - struct sockaddr ifru_netmask; - struct sockaddr ifru_hwaddr; - short ifru_flags; - int ifru_ivalue; - int ifru_mtu; - struct ifmap ifru_map; - char ifru_slave[IFNAMSIZ]; /* Just fits the size */ - char ifru_newname[IFNAMSIZ]; - void __user * ifru_data; - struct if_settings ifru_settings; - } ifr_ifru; -}; - -#define ifr_name ifr_ifrn.ifrn_name /* interface name */ -#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */ -#define ifr_addr ifr_ifru.ifru_addr /* address */ -#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */ -#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */ -#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */ -#define ifr_flags ifr_ifru.ifru_flags /* flags */ -#define ifr_metric ifr_ifru.ifru_ivalue /* metric */ -#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */ -#define ifr_map ifr_ifru.ifru_map /* device map */ -#define ifr_slave ifr_ifru.ifru_slave /* slave device */ -#define ifr_data ifr_ifru.ifru_data /* for use by interface */ -#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */ -#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */ -#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */ -#define ifr_newname ifr_ifru.ifru_newname /* New name */ -#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/ - -/* - * Structure used in SIOCGIFCONF request. - * Used to retrieve interface configuration - * for machine (useful for programs which - * must know all networks accessible). - */ - -struct ifconf { - int ifc_len; /* size of buffer */ - union { - char __user *ifcu_buf; - struct ifreq __user *ifcu_req; - } ifc_ifcu; -}; -#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */ -#define ifc_req ifc_ifcu.ifcu_req /* array of structures */ - -#endif /* _LINUX_IF_H */ diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h deleted file mode 100644 index 23357ab81a77..000000000000 --- a/include/linux/if_addr.h +++ /dev/null @@ -1,61 +0,0 @@ -#ifndef __LINUX_IF_ADDR_H -#define __LINUX_IF_ADDR_H - -#include -#include - -struct ifaddrmsg { - __u8 ifa_family; - __u8 ifa_prefixlen; /* The prefix length */ - __u8 ifa_flags; /* Flags */ - __u8 ifa_scope; /* Address scope */ - __u32 ifa_index; /* Link index */ -}; - -/* - * Important comment: - * IFA_ADDRESS is prefix address, rather than local interface address. - * It makes no difference for normally configured broadcast interfaces, - * but for point-to-point IFA_ADDRESS is DESTINATION address, - * local address is supplied in IFA_LOCAL attribute. - */ -enum { - IFA_UNSPEC, - IFA_ADDRESS, - IFA_LOCAL, - IFA_LABEL, - IFA_BROADCAST, - IFA_ANYCAST, - IFA_CACHEINFO, - IFA_MULTICAST, - __IFA_MAX, -}; - -#define IFA_MAX (__IFA_MAX - 1) - -/* ifa_flags */ -#define IFA_F_SECONDARY 0x01 -#define IFA_F_TEMPORARY IFA_F_SECONDARY - -#define IFA_F_NODAD 0x02 -#define IFA_F_OPTIMISTIC 0x04 -#define IFA_F_DADFAILED 0x08 -#define IFA_F_HOMEADDRESS 0x10 -#define IFA_F_DEPRECATED 0x20 -#define IFA_F_TENTATIVE 0x40 -#define IFA_F_PERMANENT 0x80 - -struct ifa_cacheinfo { - __u32 ifa_prefered; - __u32 ifa_valid; - __u32 cstamp; /* created timestamp, hundredths of seconds */ - __u32 tstamp; /* updated timestamp, hundredths of seconds */ -}; - -/* backwards compatibility for userspace */ -#ifndef __KERNEL__ -#define IFA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifaddrmsg)))) -#define IFA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifaddrmsg)) -#endif - -#endif diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h deleted file mode 100644 index 54580c298187..000000000000 --- a/include/linux/if_addrlabel.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * if_addrlabel.h - netlink interface for address labels - * - * Copyright (C)2007 USAGI/WIDE Project, All Rights Reserved. - * - * Authors: - * YOSHIFUJI Hideaki @ USAGI/WIDE - */ - -#ifndef __LINUX_IF_ADDRLABEL_H -#define __LINUX_IF_ADDRLABEL_H - -#include - -struct ifaddrlblmsg { - __u8 ifal_family; /* Address family */ - __u8 __ifal_reserved; /* Reserved */ - __u8 ifal_prefixlen; /* Prefix length */ - __u8 ifal_flags; /* Flags */ - __u32 ifal_index; /* Link index */ - __u32 ifal_seq; /* sequence number */ -}; - -enum { - IFAL_ADDRESS = 1, - IFAL_LABEL = 2, - __IFAL_MAX -}; - -#define IFAL_MAX (__IFAL_MAX - 1) - -#endif diff --git a/include/linux/if_alg.h b/include/linux/if_alg.h deleted file mode 100644 index 0f9acce5b1ff..000000000000 --- a/include/linux/if_alg.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * if_alg: User-space algorithm interface - * - * Copyright (c) 2010 Herbert Xu - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - */ - -#ifndef _LINUX_IF_ALG_H -#define _LINUX_IF_ALG_H - -#include - -struct sockaddr_alg { - __u16 salg_family; - __u8 salg_type[14]; - __u32 salg_feat; - __u32 salg_mask; - __u8 salg_name[64]; -}; - -struct af_alg_iv { - __u32 ivlen; - __u8 iv[0]; -}; - -/* Socket options */ -#define ALG_SET_KEY 1 -#define ALG_SET_IV 2 -#define ALG_SET_OP 3 - -/* Operations */ -#define ALG_OP_DECRYPT 0 -#define ALG_OP_ENCRYPT 1 - -#endif /* _LINUX_IF_ALG_H */ diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h deleted file mode 100644 index 46e34bd0e783..000000000000 --- a/include/linux/if_arcnet.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the ARCnet interface. - * - * Authors: David Woodhouse and Avery Pennarun - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _LINUX_IF_ARCNET_H -#define _LINUX_IF_ARCNET_H - -#include -#include - - -/* - * These are the defined ARCnet Protocol ID's. - */ - -/* CAP mode */ -/* No macro but uses 1-8 */ - -/* RFC1201 Protocol ID's */ -#define ARC_P_IP 212 /* 0xD4 */ -#define ARC_P_IPV6 196 /* 0xC4: RFC2497 */ -#define ARC_P_ARP 213 /* 0xD5 */ -#define ARC_P_RARP 214 /* 0xD6 */ -#define ARC_P_IPX 250 /* 0xFA */ -#define ARC_P_NOVELL_EC 236 /* 0xEC */ - -/* Old RFC1051 Protocol ID's */ -#define ARC_P_IP_RFC1051 240 /* 0xF0 */ -#define ARC_P_ARP_RFC1051 241 /* 0xF1 */ - -/* MS LanMan/WfWg "NDIS" encapsulation */ -#define ARC_P_ETHER 232 /* 0xE8 */ - -/* Unsupported/indirectly supported protocols */ -#define ARC_P_DATAPOINT_BOOT 0 /* very old Datapoint equipment */ -#define ARC_P_DATAPOINT_MOUNT 1 -#define ARC_P_POWERLAN_BEACON 8 /* Probably ATA-Netbios related */ -#define ARC_P_POWERLAN_BEACON2 243 /* 0xF3 */ -#define ARC_P_LANSOFT 251 /* 0xFB - what is this? */ -#define ARC_P_ATALK 0xDD - -/* Hardware address length */ -#define ARCNET_ALEN 1 - -/* - * The RFC1201-specific components of an arcnet packet header. - */ -struct arc_rfc1201 { - __u8 proto; /* protocol ID field - varies */ - __u8 split_flag; /* for use with split packets */ - __be16 sequence; /* sequence number */ - __u8 payload[0]; /* space remaining in packet (504 bytes)*/ -}; -#define RFC1201_HDR_SIZE 4 - - -/* - * The RFC1051-specific components. - */ -struct arc_rfc1051 { - __u8 proto; /* ARC_P_RFC1051_ARP/RFC1051_IP */ - __u8 payload[0]; /* 507 bytes */ -}; -#define RFC1051_HDR_SIZE 1 - - -/* - * The ethernet-encap-specific components. We have a real ethernet header - * and some data. - */ -struct arc_eth_encap { - __u8 proto; /* Always ARC_P_ETHER */ - struct ethhdr eth; /* standard ethernet header (yuck!) */ - __u8 payload[0]; /* 493 bytes */ -}; -#define ETH_ENCAP_HDR_SIZE 14 - - -struct arc_cap { - __u8 proto; - __u8 cookie[sizeof(int)]; /* Actually NOT sent over the network */ - union { - __u8 ack; - __u8 raw[0]; /* 507 bytes */ - } mes; -}; - -/* - * The data needed by the actual arcnet hardware. - * - * Now, in the real arcnet hardware, the third and fourth bytes are the - * 'offset' specification instead of the length, and the soft data is at - * the _end_ of the 512-byte buffer. We hide this complexity inside the - * driver. - */ -struct arc_hardware { - __u8 source, /* source ARCnet - filled in automagically */ - dest, /* destination ARCnet - 0 for broadcast */ - offset[2]; /* offset bytes (some weird semantics) */ -}; -#define ARC_HDR_SIZE 4 - -/* - * This is an ARCnet frame header, as seen by the kernel (and userspace, - * when you do a raw packet capture). - */ -struct archdr { - /* hardware requirements */ - struct arc_hardware hard; - - /* arcnet encapsulation-specific bits */ - union { - struct arc_rfc1201 rfc1201; - struct arc_rfc1051 rfc1051; - struct arc_eth_encap eth_encap; - struct arc_cap cap; - __u8 raw[0]; /* 508 bytes */ - } soft; -}; - -#endif /* _LINUX_IF_ARCNET_H */ diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 9adcc29f084a..89b4614a4722 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -23,140 +23,8 @@ #ifndef _LINUX_IF_ARP_H #define _LINUX_IF_ARP_H -#include - -/* ARP protocol HARDWARE identifiers. */ -#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ -#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ -#define ARPHRD_EETHER 2 /* Experimental Ethernet */ -#define ARPHRD_AX25 3 /* AX.25 Level 2 */ -#define ARPHRD_PRONET 4 /* PROnet token ring */ -#define ARPHRD_CHAOS 5 /* Chaosnet */ -#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ -#define ARPHRD_ARCNET 7 /* ARCnet */ -#define ARPHRD_APPLETLK 8 /* APPLEtalk */ -#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ -#define ARPHRD_ATM 19 /* ATM */ -#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ -#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ -#define ARPHRD_EUI64 27 /* EUI-64 */ -#define ARPHRD_INFINIBAND 32 /* InfiniBand */ - -/* Dummy types for non ARP hardware */ -#define ARPHRD_SLIP 256 -#define ARPHRD_CSLIP 257 -#define ARPHRD_SLIP6 258 -#define ARPHRD_CSLIP6 259 -#define ARPHRD_RSRVD 260 /* Notional KISS type */ -#define ARPHRD_ADAPT 264 -#define ARPHRD_ROSE 270 -#define ARPHRD_X25 271 /* CCITT X.25 */ -#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ -#define ARPHRD_CAN 280 /* Controller Area Network */ -#define ARPHRD_PPP 512 -#define ARPHRD_CISCO 513 /* Cisco HDLC */ -#define ARPHRD_HDLC ARPHRD_CISCO -#define ARPHRD_LAPB 516 /* LAPB */ -#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ -#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ - -#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ -#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ -#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ -#define ARPHRD_SKIP 771 /* SKIP vif */ -#define ARPHRD_LOOPBACK 772 /* Loopback device */ -#define ARPHRD_LOCALTLK 773 /* Localtalk device */ -#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ -#define ARPHRD_BIF 775 /* AP1000 BIF */ -#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ -#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ -#define ARPHRD_IPGRE 778 /* GRE over IP */ -#define ARPHRD_PIMREG 779 /* PIMSM register interface */ -#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ -#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ -#define ARPHRD_ECONET 782 /* Acorn Econet */ -#define ARPHRD_IRDA 783 /* Linux-IrDA */ -/* ARP works differently on different FC media .. so */ -#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ -#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ -#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ -#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ - /* 787->799 reserved for fibrechannel media types */ -#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ -#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ -#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ -#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ -#define ARPHRD_IEEE802154 804 -#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ - -#define ARPHRD_PHONET 820 /* PhoNet media type */ -#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ -#define ARPHRD_CAIF 822 /* CAIF media type */ -#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ - -#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ -#define ARPHRD_NONE 0xFFFE /* zero header length */ - -/* ARP protocol opcodes. */ -#define ARPOP_REQUEST 1 /* ARP request */ -#define ARPOP_REPLY 2 /* ARP reply */ -#define ARPOP_RREQUEST 3 /* RARP request */ -#define ARPOP_RREPLY 4 /* RARP reply */ -#define ARPOP_InREQUEST 8 /* InARP request */ -#define ARPOP_InREPLY 9 /* InARP reply */ -#define ARPOP_NAK 10 /* (ATM)ARP NAK */ - - -/* ARP ioctl request. */ -struct arpreq { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ - char arp_dev[16]; -}; - -struct arpreq_old { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ -}; - -/* ARP Flag values. */ -#define ATF_COM 0x02 /* completed entry (ha valid) */ -#define ATF_PERM 0x04 /* permanent entry */ -#define ATF_PUBL 0x08 /* publish entry */ -#define ATF_USETRAILERS 0x10 /* has requested trailers */ -#define ATF_NETMASK 0x20 /* want to use a netmask (only - for proxy entries) */ -#define ATF_DONTPUB 0x40 /* don't answer this addresses */ - -/* - * This structure defines an ethernet arp header. - */ - -struct arphdr { - __be16 ar_hrd; /* format of hardware address */ - __be16 ar_pro; /* format of protocol address */ - unsigned char ar_hln; /* length of hardware address */ - unsigned char ar_pln; /* length of protocol address */ - __be16 ar_op; /* ARP opcode (command) */ - -#if 0 - /* - * Ethernet looks like this : This bit is variable sized however... - */ - unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ - unsigned char ar_sip[4]; /* sender IP address */ - unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ - unsigned char ar_tip[4]; /* target IP address */ -#endif - -}; - -#ifdef __KERNEL__ #include +#include static inline struct arphdr *arp_hdr(const struct sk_buff *skb) { @@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev) /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2; } -#endif - #endif /* _LINUX_IF_ARP_H */ diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h deleted file mode 100644 index a17edda8a781..000000000000 --- a/include/linux/if_bonding.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Bond several ethernet interfaces into a Cisco, running 'Etherchannel'. - * - * - * Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes - * NCM: Network and Communications Management, Inc. - * - * BUT, I'm the one who modified it for ethernet, so: - * (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov - * - * This software may be used and distributed according to the terms - * of the GNU Public License, incorporated herein by reference. - * - * 2003/03/18 - Amir Noam - * - Added support for getting slave's speed and duplex via ethtool. - * Needed for 802.3ad and other future modes. - * - * 2003/03/18 - Tsippy Mendelson and - * Shmulik Hen - * - Enable support of modes that need to use the unique mac address of - * each slave. - * - * 2003/03/18 - Tsippy Mendelson and - * Amir Noam - * - Moved driver's private data types to bonding.h - * - * 2003/03/18 - Amir Noam , - * Tsippy Mendelson and - * Shmulik Hen - * - Added support for IEEE 802.3ad Dynamic link aggregation mode. - * - * 2003/05/01 - Amir Noam - * - Added ABI version control to restore compatibility between - * new/old ifenslave and new/old bonding. - * - * 2003/12/01 - Shmulik Hen - * - Code cleanup and style changes - * - * 2005/05/05 - Jason Gabler - * - added definitions for various XOR hashing policies - */ - -#ifndef _LINUX_IF_BONDING_H -#define _LINUX_IF_BONDING_H - -#include -#include -#include - -/* userland - kernel ABI version (2003/05/08) */ -#define BOND_ABI_VERSION 2 - -/* - * We can remove these ioctl definitions in 2.5. People should use the - * SIOC*** versions of them instead - */ -#define BOND_ENSLAVE_OLD (SIOCDEVPRIVATE) -#define BOND_RELEASE_OLD (SIOCDEVPRIVATE + 1) -#define BOND_SETHWADDR_OLD (SIOCDEVPRIVATE + 2) -#define BOND_SLAVE_INFO_QUERY_OLD (SIOCDEVPRIVATE + 11) -#define BOND_INFO_QUERY_OLD (SIOCDEVPRIVATE + 12) -#define BOND_CHANGE_ACTIVE_OLD (SIOCDEVPRIVATE + 13) - -#define BOND_CHECK_MII_STATUS (SIOCGMIIPHY) - -#define BOND_MODE_ROUNDROBIN 0 -#define BOND_MODE_ACTIVEBACKUP 1 -#define BOND_MODE_XOR 2 -#define BOND_MODE_BROADCAST 3 -#define BOND_MODE_8023AD 4 -#define BOND_MODE_TLB 5 -#define BOND_MODE_ALB 6 /* TLB + RLB (receive load balancing) */ - -/* each slave's link has 4 states */ -#define BOND_LINK_UP 0 /* link is up and running */ -#define BOND_LINK_FAIL 1 /* link has just gone down */ -#define BOND_LINK_DOWN 2 /* link has been down for too long time */ -#define BOND_LINK_BACK 3 /* link is going back */ - -/* each slave has several states */ -#define BOND_STATE_ACTIVE 0 /* link is active */ -#define BOND_STATE_BACKUP 1 /* link is backup */ - -#define BOND_DEFAULT_MAX_BONDS 1 /* Default maximum number of devices to support */ - -#define BOND_DEFAULT_TX_QUEUES 16 /* Default number of tx queues per device */ - -#define BOND_DEFAULT_RESEND_IGMP 1 /* Default number of IGMP membership reports */ - -/* hashing types */ -#define BOND_XMIT_POLICY_LAYER2 0 /* layer 2 (MAC only), default */ -#define BOND_XMIT_POLICY_LAYER34 1 /* layer 3+4 (IP ^ (TCP || UDP)) */ -#define BOND_XMIT_POLICY_LAYER23 2 /* layer 2+3 (IP ^ MAC) */ - -typedef struct ifbond { - __s32 bond_mode; - __s32 num_slaves; - __s32 miimon; -} ifbond; - -typedef struct ifslave { - __s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */ - char slave_name[IFNAMSIZ]; - __s8 link; - __s8 state; - __u32 link_failure_count; -} ifslave; - -struct ad_info { - __u16 aggregator_id; - __u16 ports; - __u16 actor_key; - __u16 partner_key; - __u8 partner_system[ETH_ALEN]; -}; - -#endif /* _LINUX_IF_BONDING_H */ - -/* - * Local variables: - * version-control: t - * kept-new-versions: 5 - * c-indent-level: 8 - * c-basic-offset: 8 - * tab-width: 8 - * End: - */ - diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index dd3f20139640..1085ffeef956 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -9,97 +9,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_BRIDGE_H #define _LINUX_IF_BRIDGE_H -#include - -#define SYSFS_BRIDGE_ATTR "bridge" -#define SYSFS_BRIDGE_FDB "brforward" -#define SYSFS_BRIDGE_PORT_SUBDIR "brif" -#define SYSFS_BRIDGE_PORT_ATTR "brport" -#define SYSFS_BRIDGE_PORT_LINK "bridge" - -#define BRCTL_VERSION 1 - -#define BRCTL_GET_VERSION 0 -#define BRCTL_GET_BRIDGES 1 -#define BRCTL_ADD_BRIDGE 2 -#define BRCTL_DEL_BRIDGE 3 -#define BRCTL_ADD_IF 4 -#define BRCTL_DEL_IF 5 -#define BRCTL_GET_BRIDGE_INFO 6 -#define BRCTL_GET_PORT_LIST 7 -#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 -#define BRCTL_SET_BRIDGE_HELLO_TIME 9 -#define BRCTL_SET_BRIDGE_MAX_AGE 10 -#define BRCTL_SET_AGEING_TIME 11 -#define BRCTL_SET_GC_INTERVAL 12 -#define BRCTL_GET_PORT_INFO 13 -#define BRCTL_SET_BRIDGE_STP_STATE 14 -#define BRCTL_SET_BRIDGE_PRIORITY 15 -#define BRCTL_SET_PORT_PRIORITY 16 -#define BRCTL_SET_PATH_COST 17 -#define BRCTL_GET_FDB_ENTRIES 18 - -#define BR_STATE_DISABLED 0 -#define BR_STATE_LISTENING 1 -#define BR_STATE_LEARNING 2 -#define BR_STATE_FORWARDING 3 -#define BR_STATE_BLOCKING 4 - -struct __bridge_info { - __u64 designated_root; - __u64 bridge_id; - __u32 root_path_cost; - __u32 max_age; - __u32 hello_time; - __u32 forward_delay; - __u32 bridge_max_age; - __u32 bridge_hello_time; - __u32 bridge_forward_delay; - __u8 topology_change; - __u8 topology_change_detected; - __u8 root_port; - __u8 stp_enabled; - __u32 ageing_time; - __u32 gc_interval; - __u32 hello_timer_value; - __u32 tcn_timer_value; - __u32 topology_change_timer_value; - __u32 gc_timer_value; -}; - -struct __port_info { - __u64 designated_root; - __u64 designated_bridge; - __u16 port_id; - __u16 designated_port; - __u32 path_cost; - __u32 designated_cost; - __u8 state; - __u8 top_change_ack; - __u8 config_pending; - __u8 unused0; - __u32 message_age_timer_value; - __u32 forward_delay_timer_value; - __u32 hold_timer_value; -}; - -struct __fdb_entry { - __u8 mac_addr[6]; - __u8 port_no; - __u8 is_local; - __u32 ageing_timer_value; - __u8 port_hi; - __u8 pad0; - __u16 unused; -}; - -#ifdef __KERNEL__ #include +#include extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *)); @@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb); extern br_should_route_hook_t __rcu *br_should_route_hook; #endif - -#endif diff --git a/include/linux/if_cablemodem.h b/include/linux/if_cablemodem.h deleted file mode 100644 index 9ca1007edd93..000000000000 --- a/include/linux/if_cablemodem.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _LINUX_CABLEMODEM_H_ -#define _LINUX_CABLEMODEM_H_ -/* - * Author: Franco Venturi - * Copyright 1998 Franco Venturi - * - * This program is free software; you can redistribute it - * and/or modify it under the terms of the GNU General - * Public License as published by the Free Software - * Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* some useful defines for sb1000.c e cmconfig.c - fv */ -#define SIOCGCMSTATS SIOCDEVPRIVATE+0 /* get cable modem stats */ -#define SIOCGCMFIRMWARE SIOCDEVPRIVATE+1 /* get cm firmware version */ -#define SIOCGCMFREQUENCY SIOCDEVPRIVATE+2 /* get cable modem frequency */ -#define SIOCSCMFREQUENCY SIOCDEVPRIVATE+3 /* set cable modem frequency */ -#define SIOCGCMPIDS SIOCDEVPRIVATE+4 /* get cable modem PIDs */ -#define SIOCSCMPIDS SIOCDEVPRIVATE+5 /* set cable modem PIDs */ - -#endif diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h index 18a5d02a8644..d984694c384d 100644 --- a/include/linux/if_eql.h +++ b/include/linux/if_eql.h @@ -15,28 +15,13 @@ * McLean VA 22101 * Phone: 1-703-847-0040 ext 103 */ - #ifndef _LINUX_IF_EQL_H #define _LINUX_IF_EQL_H -#define EQL_DEFAULT_SLAVE_PRIORITY 28800 -#define EQL_DEFAULT_MAX_SLAVES 4 -#define EQL_DEFAULT_MTU 576 -#define EQL_DEFAULT_RESCHED_IVAL HZ - -#define EQL_ENSLAVE (SIOCDEVPRIVATE) -#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) - -#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2) -#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3) - -#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4) -#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5) - -#ifdef __KERNEL__ #include #include +#include typedef struct slave { struct list_head list; @@ -61,23 +46,4 @@ typedef struct equalizer { struct timer_list timer; } equalizer_t; -#endif /* __KERNEL__ */ - -typedef struct master_config { - char master_name[16]; - int max_slaves; - int min_slaves; -} master_config_t; - -typedef struct slave_config { - char slave_name[16]; - long priority; -} slave_config_t; - -typedef struct slaving_request { - char slave_name[16]; - long priority; -} slaving_request_t; - - #endif /* _LINUX_EQL_H */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 167ce5b363d2..12b4d55a02af 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -17,122 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_ETHER_H #define _LINUX_IF_ETHER_H -#include - -/* - * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble - * and FCS/CRC (frame check sequence). - */ - -#define ETH_ALEN 6 /* Octets in one ethernet addr */ -#define ETH_HLEN 14 /* Total octets in header. */ -#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ -#define ETH_DATA_LEN 1500 /* Max. octets in payload */ -#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ - -/* - * These are the defined Ethernet Protocol ID's. - */ - -#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ -#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ -#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ -#define ETH_P_IP 0x0800 /* Internet Protocol packet */ -#define ETH_P_X25 0x0805 /* CCITT X.25 */ -#define ETH_P_ARP 0x0806 /* Address Resolution packet */ -#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ -#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ -#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ -#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ -#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ -#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ -#define ETH_P_LAT 0x6004 /* DEC LAT */ -#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ -#define ETH_P_CUST 0x6006 /* DEC Customer use */ -#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ -#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ -#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ -#define ETH_P_ATALK 0x809B /* Appletalk DDP */ -#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ -#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ -#define ETH_P_IPX 0x8137 /* IPX over DIX */ -#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ -#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ -#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ -#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol - * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ -#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ -#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ -#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ -#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ -#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport - * over Ethernet - */ -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ -#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ -#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ -#define ETH_P_TIPC 0x88CA /* TIPC */ -#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ -#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ -#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ -#define ETH_P_TDLS 0x890D /* TDLS */ -#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ -#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ - -/* - * Non DIX types. Won't clash for 1500 types. - */ - -#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ -#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ -#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ -#define ETH_P_802_2 0x0004 /* 802.2 frames */ -#define ETH_P_SNAP 0x0005 /* Internal only */ -#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ -#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ -#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ -#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ -#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ -#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ -#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ -#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ -#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ -#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ -#define ETH_P_ECONET 0x0018 /* Acorn Econet */ -#define ETH_P_HDLC 0x0019 /* HDLC frames */ -#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ -#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ -#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ -#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ -#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ -#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ - -/* - * This is an Ethernet frame header. - */ - -struct ethhdr { - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - __be16 h_proto; /* packet type ID field */ -} __attribute__((packed)); - -#ifdef __KERNEL__ #include +#include static inline struct ethhdr *eth_hdr(const struct sk_buff *skb) { @@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr); int mac_pton(const char *s, u8 *mac); extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); -#endif - #endif /* _LINUX_IF_ETHER_H */ diff --git a/include/linux/if_fc.h b/include/linux/if_fc.h deleted file mode 100644 index 6ed7f1bf35c8..000000000000 --- a/include/linux/if_fc.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for Fibre Channel. - * - * Version: @(#)if_fc.h 0.0 11/20/98 - * - * Author: Fred N. van Kempen, - * Donald Becker, - * Peter De Schrijver, - * Vineet Abraham, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _LINUX_IF_FC_H -#define _LINUX_IF_FC_H - -#include - -#define FC_ALEN 6 /* Octets in one ethernet addr */ -#define FC_HLEN (sizeof(struct fch_hdr)+sizeof(struct fcllc)) -#define FC_ID_LEN 3 /* Octets in a Fibre Channel Address */ - -/* LLC and SNAP constants */ -#define EXTENDED_SAP 0xAA -#define UI_CMD 0x03 - -/* This is NOT the Fibre Channel frame header. The FC frame header is - * constructed in the driver as the Tachyon needs certain fields in - * certains positions. So, it can't be generalized here.*/ - -struct fch_hdr { - __u8 daddr[FC_ALEN]; /* destination address */ - __u8 saddr[FC_ALEN]; /* source address */ -}; - -/* This is a Fibre Channel LLC structure */ -struct fcllc { - __u8 dsap; /* destination SAP */ - __u8 ssap; /* source SAP */ - __u8 llc; /* LLC control field */ - __u8 protid[3]; /* protocol id */ - __be16 ethertype; /* ether type field */ -}; - -#endif /* _LINUX_IF_FC_H */ diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h index e6dc11e7f9a5..f5550b3eeeab 100644 --- a/include/linux/if_fddi.h +++ b/include/linux/if_fddi.h @@ -24,84 +24,8 @@ #ifndef _LINUX_IF_FDDI_H #define _LINUX_IF_FDDI_H -#include - -/* - * Define max and min legal sizes. The frame sizes do not include - * 4 byte FCS/CRC (frame check sequence). - */ -#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ -#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ -#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ -#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ -#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ -#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ -#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ -#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ -#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ - -/* Define FDDI Frame Control (FC) Byte values */ -#define FDDI_FC_K_VOID 0x00 -#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 -#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 -#define FDDI_FC_K_SMT_MIN 0x41 -#define FDDI_FC_K_SMT_MAX 0x4F -#define FDDI_FC_K_MAC_MIN 0xC1 -#define FDDI_FC_K_MAC_MAX 0xCF -#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 -#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 -#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F -#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 -#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 -#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 -#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F -#define FDDI_FC_K_RESERVED_MIN 0x70 -#define FDDI_FC_K_RESERVED_MAX 0x7F - -/* Define LLC and SNAP constants */ -#define FDDI_EXTENDED_SAP 0xAA -#define FDDI_UI_CMD 0x03 - -/* Define 802.2 Type 1 header */ -struct fddi_8022_1_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl; /* control byte #1 */ -} __attribute__((packed)); - -/* Define 802.2 Type 2 header */ -struct fddi_8022_2_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl_1; /* control byte #1 */ - __u8 ctrl_2; /* control byte #2 */ -} __attribute__((packed)); - -/* Define 802.2 SNAP header */ -#define FDDI_K_OUI_LEN 3 -struct fddi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ - __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ - __be16 ethertype; /* packet type ID field */ -} __attribute__((packed)); - -/* Define FDDI LLC frame header */ -struct fddihdr { - __u8 fc; /* frame control */ - __u8 daddr[FDDI_K_ALEN]; /* destination address */ - __u8 saddr[FDDI_K_ALEN]; /* source address */ - union - { - struct fddi_8022_1_hdr llc_8022_1; - struct fddi_8022_2_hdr llc_8022_2; - struct fddi_snap_hdr llc_snap; - } hdr; -} __attribute__((packed)); - -#ifdef __KERNEL__ #include +#include /* Define FDDI statistics structure */ struct fddi_statistics { @@ -194,6 +118,4 @@ struct fddi_statistics { __u32 port_ler_flag[2]; __u32 port_hardware_present[2]; }; -#endif /* __KERNEL__ */ - #endif /* _LINUX_IF_FDDI_H */ diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 191ee0869bc1..4316aa173dde 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -20,105 +20,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _FRAD_H_ #define _FRAD_H_ -#include - -/* Structures and constants associated with the DLCI device driver */ - -struct dlci_add -{ - char devname[IFNAMSIZ]; - short dlci; -}; - -#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) -#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) - -/* - * These are related to the Sangoma SDLA and should remain in order. - * Code within the SDLA module is based on the specifics of this - * structure. Change at your own peril. - */ -struct dlci_conf { - short flags; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* these are part of the status read */ - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; - -/* add any new fields here above is a mirror of sdla_dlci_conf */ -}; - -#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) - -/* configuration flags for DLCI */ -#define DLCI_IGNORE_CIR_OUT 0x0001 -#define DLCI_ACCOUNT_CIR_IN 0x0002 -#define DLCI_BUFFER_IF 0x0008 - -#define DLCI_VALID_FLAGS 0x000B +#include -/* defines for the actual Frame Relay hardware */ -#define FRAD_GET_CONF (SIOCDEVPRIVATE) -#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) - -#define FRAD_LAST_IOCTL FRAD_SET_CONF - -/* - * Based on the setup for the Sangoma SDLA. If changes are - * necessary to this structure, a routine will need to be - * added to that module to copy fields. - */ -struct frad_conf -{ - short station; - short flags; - short kbaud; - short clocking; - short mtu; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* Add new fields here, above is a mirror of the sdla_conf */ - -}; - -#define FRAD_STATION_CPE 0x0000 -#define FRAD_STATION_NODE 0x0001 - -#define FRAD_TX_IGNORE_CIR 0x0001 -#define FRAD_RX_ACCOUNT_CIR 0x0002 -#define FRAD_DROP_ABORTED 0x0004 -#define FRAD_BUFFERIF 0x0008 -#define FRAD_STATS 0x0010 -#define FRAD_MCI 0x0100 -#define FRAD_AUTODLCI 0x8000 -#define FRAD_VALID_FLAGS 0x811F - -#define FRAD_CLOCK_INT 0x0001 -#define FRAD_CLOCK_EXT 0x0000 - -#ifdef __KERNEL__ #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE) @@ -188,6 +94,4 @@ struct frad_local extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *)); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h deleted file mode 100644 index cdc049f1829a..000000000000 --- a/include/linux/if_hippi.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the HIPPI interface. - * - * Version: @(#)if_hippi.h 1.0.0 05/26/97 - * - * Author: Fred N. van Kempen, - * Donald Becker, - * Alan Cox, - * Steve Whitehouse, - * Jes Sorensen, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _LINUX_IF_HIPPI_H -#define _LINUX_IF_HIPPI_H - -#include -#include - -/* - * HIPPI magic constants. - */ - -#define HIPPI_ALEN 6 /* Bytes in one HIPPI hw-addr */ -#define HIPPI_HLEN sizeof(struct hippi_hdr) -#define HIPPI_ZLEN 0 /* Min. bytes in frame without FCS */ -#define HIPPI_DATA_LEN 65280 /* Max. bytes in payload */ -#define HIPPI_FRAME_LEN (HIPPI_DATA_LEN + HIPPI_HLEN) - /* Max. bytes in frame without FCS */ - -/* - * Define LLC and SNAP constants. - */ -#define HIPPI_EXTENDED_SAP 0xAA -#define HIPPI_UI_CMD 0x03 - - -/* - * Do we need to list some sort of ID's here? - */ - -/* - * HIPPI statistics collection data. - */ - -struct hipnet_statistics { - int rx_packets; /* total packets received */ - int tx_packets; /* total packets transmitted */ - int rx_errors; /* bad packets received */ - int tx_errors; /* packet transmit problems */ - int rx_dropped; /* no space in linux buffers */ - int tx_dropped; /* no space available in linux */ - - /* detailed rx_errors: */ - int rx_length_errors; - int rx_over_errors; /* receiver ring buff overflow */ - int rx_crc_errors; /* recved pkt with crc error */ - int rx_frame_errors; /* recv'd frame alignment error */ - int rx_fifo_errors; /* recv'r fifo overrun */ - int rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - int tx_aborted_errors; - int tx_carrier_errors; - int tx_fifo_errors; - int tx_heartbeat_errors; - int tx_window_errors; -}; - - -struct hippi_fp_hdr { -#if 0 - __u8 ulp; /* must contain 4 */ -#if defined (__BIG_ENDIAN_BITFIELD) - __u8 d1_data_present:1; /* must be 1 */ - __u8 start_d2_burst_boundary:1; /* must be zero */ - __u8 reserved:6; /* must be zero */ -#if 0 - __u16 reserved1:5; - __u16 d1_area_size:8; /* must be 3 */ - __u16 d2_offset:3; /* must be zero */ -#endif -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 reserved:6; /* must be zero */ - __u8 start_d2_burst_boundary:1; /* must be zero */ - __u8 d1_data_present:1; /* must be 1 */ -#if 0 - __u16 d2_offset:3; /* must be zero */ - __u16 d1_area_size:8; /* must be 3 */ - __u16 reserved1:5; /* must be zero */ -#endif -#else -#error "Please fix " -#endif -#else - __be32 fixed; -#endif - __be32 d2_size; -} __attribute__((packed)); - -struct hippi_le_hdr { -#if defined (__BIG_ENDIAN_BITFIELD) - __u8 fc:3; - __u8 double_wide:1; - __u8 message_type:4; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 message_type:4; - __u8 double_wide:1; - __u8 fc:3; -#endif - __u8 dest_switch_addr[3]; -#if defined (__BIG_ENDIAN_BITFIELD) - __u8 dest_addr_type:4, - src_addr_type:4; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 src_addr_type:4, - dest_addr_type:4; -#endif - __u8 src_switch_addr[3]; - __u16 reserved; - __u8 daddr[HIPPI_ALEN]; - __u16 locally_administered; - __u8 saddr[HIPPI_ALEN]; -} __attribute__((packed)); - -#define HIPPI_OUI_LEN 3 -/* - * Looks like the dsap and ssap fields have been swapped by mistake in - * RFC 2067 "IP over HIPPI". - */ -struct hippi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ - __u8 oui[HIPPI_OUI_LEN]; /* organizational universal id (zero)*/ - __be16 ethertype; /* packet type ID field */ -} __attribute__((packed)); - -struct hippi_hdr { - struct hippi_fp_hdr fp; - struct hippi_le_hdr le; - struct hippi_snap_hdr snap; -} __attribute__((packed)); - -#endif /* _LINUX_IF_HIPPI_H */ diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h deleted file mode 100644 index 7d958475d4ac..000000000000 --- a/include/linux/if_infiniband.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available at - * , or the OpenIB.org BSD - * license, available in the LICENSE.TXT file accompanying this - * software. These details are also available at - * . - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * Copyright (c) 2004 Topspin Communications. All rights reserved. - * - * $Id$ - */ - -#ifndef _LINUX_IF_INFINIBAND_H -#define _LINUX_IF_INFINIBAND_H - -#define INFINIBAND_ALEN 20 /* Octets in IPoIB HW addr */ - -#endif /* _LINUX_IF_INFINIBAND_H */ diff --git a/include/linux/if_link.h b/include/linux/if_link.h index 3265f332998a..c3f817c3eb45 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -1,341 +1,8 @@ #ifndef _LINUX_IF_LINK_H #define _LINUX_IF_LINK_H -#include -#include +#include -/* This struct should be in sync with struct rtnl_link_stats64 */ -struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ - __u32 collisions; - - /* detailed rx_errors: */ - __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u32 tx_aborted_errors; - __u32 tx_carrier_errors; - __u32 tx_fifo_errors; - __u32 tx_heartbeat_errors; - __u32 tx_window_errors; - - /* for cslip etc */ - __u32 rx_compressed; - __u32 tx_compressed; -}; - -/* The main device statistics structure */ -struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ - __u64 collisions; - - /* detailed rx_errors: */ - __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u64 tx_aborted_errors; - __u64 tx_carrier_errors; - __u64 tx_fifo_errors; - __u64 tx_heartbeat_errors; - __u64 tx_window_errors; - - /* for cslip etc */ - __u64 rx_compressed; - __u64 tx_compressed; -}; - -/* The struct should be in sync with struct ifmap */ -struct rtnl_link_ifmap { - __u64 mem_start; - __u64 mem_end; - __u64 base_addr; - __u16 irq; - __u8 dma; - __u8 port; -}; - -/* - * IFLA_AF_SPEC - * Contains nested attributes for address family specific attributes. - * Each address family may create a attribute with the address family - * number as type and create its own attribute structure in it. - * - * Example: - * [IFLA_AF_SPEC] = { - * [AF_INET] = { - * [IFLA_INET_CONF] = ..., - * }, - * [AF_INET6] = { - * [IFLA_INET6_FLAGS] = ..., - * [IFLA_INET6_CONF] = ..., - * } - * } - */ - -enum { - IFLA_UNSPEC, - IFLA_ADDRESS, - IFLA_BROADCAST, - IFLA_IFNAME, - IFLA_MTU, - IFLA_LINK, - IFLA_QDISC, - IFLA_STATS, - IFLA_COST, -#define IFLA_COST IFLA_COST - IFLA_PRIORITY, -#define IFLA_PRIORITY IFLA_PRIORITY - IFLA_MASTER, -#define IFLA_MASTER IFLA_MASTER - IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ -#define IFLA_WIRELESS IFLA_WIRELESS - IFLA_PROTINFO, /* Protocol specific information for a link */ -#define IFLA_PROTINFO IFLA_PROTINFO - IFLA_TXQLEN, -#define IFLA_TXQLEN IFLA_TXQLEN - IFLA_MAP, -#define IFLA_MAP IFLA_MAP - IFLA_WEIGHT, -#define IFLA_WEIGHT IFLA_WEIGHT - IFLA_OPERSTATE, - IFLA_LINKMODE, - IFLA_LINKINFO, -#define IFLA_LINKINFO IFLA_LINKINFO - IFLA_NET_NS_PID, - IFLA_IFALIAS, - IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ - IFLA_VFINFO_LIST, - IFLA_STATS64, - IFLA_VF_PORTS, - IFLA_PORT_SELF, - IFLA_AF_SPEC, - IFLA_GROUP, /* Group the device belongs to */ - IFLA_NET_NS_FD, - IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ - IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ -#define IFLA_PROMISCUITY IFLA_PROMISCUITY - IFLA_NUM_TX_QUEUES, - IFLA_NUM_RX_QUEUES, - __IFLA_MAX -}; - - -#define IFLA_MAX (__IFLA_MAX - 1) - -/* backwards compatibility for userspace */ -#ifndef __KERNEL__ -#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) -#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) -#endif - -enum { - IFLA_INET_UNSPEC, - IFLA_INET_CONF, - __IFLA_INET_MAX, -}; - -#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) - -/* ifi_flags. - - IFF_* flags. - - The only change is: - IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are - more not changeable by user. They describe link media - characteristics and set by device driver. - - Comments: - - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid - - If neither of these three flags are set; - the interface is NBMA. - - - IFF_MULTICAST does not mean anything special: - multicasts can be used on all not-NBMA links. - IFF_MULTICAST means that this media uses special encapsulation - for multicast frames. Apparently, all IFF_POINTOPOINT and - IFF_BROADCAST devices are able to use multicasts too. - */ - -/* IFLA_LINK. - For usual devices it is equal ifi_index. - If it is a "virtual interface" (f.e. tunnel), ifi_link - can point to real physical interface (f.e. for bandwidth calculations), - or maybe 0, what means, that real media is unknown (usual - for IPIP tunnels, when route to endpoint is allowed to change) - */ - -/* Subtype attributes for IFLA_PROTINFO */ -enum { - IFLA_INET6_UNSPEC, - IFLA_INET6_FLAGS, /* link flags */ - IFLA_INET6_CONF, /* sysctl parameters */ - IFLA_INET6_STATS, /* statistics */ - IFLA_INET6_MCAST, /* MC things. What of them? */ - IFLA_INET6_CACHEINFO, /* time values and max reasm size */ - IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ - __IFLA_INET6_MAX -}; - -#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) - -struct ifla_cacheinfo { - __u32 max_reasm_len; - __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ - __u32 reachable_time; - __u32 retrans_time; -}; - -enum { - IFLA_INFO_UNSPEC, - IFLA_INFO_KIND, - IFLA_INFO_DATA, - IFLA_INFO_XSTATS, - __IFLA_INFO_MAX, -}; - -#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) - -/* VLAN section */ - -enum { - IFLA_VLAN_UNSPEC, - IFLA_VLAN_ID, - IFLA_VLAN_FLAGS, - IFLA_VLAN_EGRESS_QOS, - IFLA_VLAN_INGRESS_QOS, - __IFLA_VLAN_MAX, -}; - -#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) - -struct ifla_vlan_flags { - __u32 flags; - __u32 mask; -}; - -enum { - IFLA_VLAN_QOS_UNSPEC, - IFLA_VLAN_QOS_MAPPING, - __IFLA_VLAN_QOS_MAX -}; - -#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) - -struct ifla_vlan_qos_mapping { - __u32 from; - __u32 to; -}; - -/* MACVLAN section */ -enum { - IFLA_MACVLAN_UNSPEC, - IFLA_MACVLAN_MODE, - IFLA_MACVLAN_FLAGS, - __IFLA_MACVLAN_MAX, -}; - -#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) - -enum macvlan_mode { - MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ - MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ - MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ - MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ -}; - -#define MACVLAN_FLAG_NOPROMISC 1 - -/* VXLAN section */ -enum { - IFLA_VXLAN_UNSPEC, - IFLA_VXLAN_ID, - IFLA_VXLAN_GROUP, - IFLA_VXLAN_LINK, - IFLA_VXLAN_LOCAL, - IFLA_VXLAN_TTL, - IFLA_VXLAN_TOS, - IFLA_VXLAN_LEARNING, - IFLA_VXLAN_AGEING, - IFLA_VXLAN_LIMIT, - IFLA_VXLAN_PORT_RANGE, - __IFLA_VXLAN_MAX -}; -#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) - -struct ifla_vxlan_port_range { - __be16 low; - __be16 high; -}; - -/* SR-IOV virtual function management section */ - -enum { - IFLA_VF_INFO_UNSPEC, - IFLA_VF_INFO, - __IFLA_VF_INFO_MAX, -}; - -#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) - -enum { - IFLA_VF_UNSPEC, - IFLA_VF_MAC, /* Hardware queue specific attributes */ - IFLA_VF_VLAN, - IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ - IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ - __IFLA_VF_MAX, -}; - -#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) - -struct ifla_vf_mac { - __u32 vf; - __u8 mac[32]; /* MAX_ADDR_LEN */ -}; - -struct ifla_vf_vlan { - __u32 vf; - __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ - __u32 qos; -}; - -struct ifla_vf_tx_rate { - __u32 vf; - __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ -}; - -struct ifla_vf_spoofchk { - __u32 vf; - __u32 setting; -}; -#ifdef __KERNEL__ /* We don't want this structure exposed to user space */ struct ifla_vf_info { @@ -346,96 +13,4 @@ struct ifla_vf_info { __u32 tx_rate; __u32 spoofchk; }; -#endif - -/* VF ports management section - * - * Nested layout of set/get msg is: - * - * [IFLA_NUM_VF] - * [IFLA_VF_PORTS] - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * ... - * [IFLA_PORT_SELF] - * [IFLA_PORT_*], ... - */ - -enum { - IFLA_VF_PORT_UNSPEC, - IFLA_VF_PORT, /* nest */ - __IFLA_VF_PORT_MAX, -}; - -#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) - -enum { - IFLA_PORT_UNSPEC, - IFLA_PORT_VF, /* __u32 */ - IFLA_PORT_PROFILE, /* string */ - IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ - IFLA_PORT_INSTANCE_UUID, /* binary UUID */ - IFLA_PORT_HOST_UUID, /* binary UUID */ - IFLA_PORT_REQUEST, /* __u8 */ - IFLA_PORT_RESPONSE, /* __u16, output only */ - __IFLA_PORT_MAX, -}; - -#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) - -#define PORT_PROFILE_MAX 40 -#define PORT_UUID_MAX 16 -#define PORT_SELF_VF -1 - -enum { - PORT_REQUEST_PREASSOCIATE = 0, - PORT_REQUEST_PREASSOCIATE_RR, - PORT_REQUEST_ASSOCIATE, - PORT_REQUEST_DISASSOCIATE, -}; - -enum { - PORT_VDP_RESPONSE_SUCCESS = 0, - PORT_VDP_RESPONSE_INVALID_FORMAT, - PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_VDP_RESPONSE_UNUSED_VTID, - PORT_VDP_RESPONSE_VTID_VIOLATION, - PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, - PORT_VDP_RESPONSE_OUT_OF_SYNC, - /* 0x08-0xFF reserved for future VDP use */ - PORT_PROFILE_RESPONSE_SUCCESS = 0x100, - PORT_PROFILE_RESPONSE_INPROGRESS, - PORT_PROFILE_RESPONSE_INVALID, - PORT_PROFILE_RESPONSE_BADSTATE, - PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_PROFILE_RESPONSE_ERROR, -}; - -struct ifla_port_vsi { - __u8 vsi_mgr_id; - __u8 vsi_type_id[3]; - __u8 vsi_type_version; - __u8 pad[3]; -}; - - -/* IPoIB section */ - -enum { - IFLA_IPOIB_UNSPEC, - IFLA_IPOIB_PKEY, - IFLA_IPOIB_MODE, - IFLA_IPOIB_UMCAST, - __IFLA_IPOIB_MAX -}; - -enum { - IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ - IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ -}; - -#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) - #endif /* _LINUX_IF_LINK_H */ diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h index 76525760ba48..81e434c50790 100644 --- a/include/linux/if_ltalk.h +++ b/include/linux/if_ltalk.h @@ -1,12 +1,7 @@ #ifndef __LINUX_LTALK_H #define __LINUX_LTALK_H -#define LTALK_HLEN 1 -#define LTALK_MTU 600 -#define LTALK_ALEN 1 +#include -#ifdef __KERNEL__ extern struct net_device *alloc_ltalkdev(int sizeof_priv); #endif - -#endif diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h deleted file mode 100644 index f3799295d231..000000000000 --- a/include/linux/if_packet.h +++ /dev/null @@ -1,272 +0,0 @@ -#ifndef __LINUX_IF_PACKET_H -#define __LINUX_IF_PACKET_H - -#include - -struct sockaddr_pkt { - unsigned short spkt_family; - unsigned char spkt_device[14]; - __be16 spkt_protocol; -}; - -struct sockaddr_ll { - unsigned short sll_family; - __be16 sll_protocol; - int sll_ifindex; - unsigned short sll_hatype; - unsigned char sll_pkttype; - unsigned char sll_halen; - unsigned char sll_addr[8]; -}; - -/* Packet types */ - -#define PACKET_HOST 0 /* To us */ -#define PACKET_BROADCAST 1 /* To all */ -#define PACKET_MULTICAST 2 /* To group */ -#define PACKET_OTHERHOST 3 /* To someone else */ -#define PACKET_OUTGOING 4 /* Outgoing of any type */ -/* These ones are invisible by user level */ -#define PACKET_LOOPBACK 5 /* MC/BRD frame looped back */ -#define PACKET_FASTROUTE 6 /* Fastrouted frame */ - -/* Packet socket options */ - -#define PACKET_ADD_MEMBERSHIP 1 -#define PACKET_DROP_MEMBERSHIP 2 -#define PACKET_RECV_OUTPUT 3 -/* Value 4 is still used by obsolete turbo-packet. */ -#define PACKET_RX_RING 5 -#define PACKET_STATISTICS 6 -#define PACKET_COPY_THRESH 7 -#define PACKET_AUXDATA 8 -#define PACKET_ORIGDEV 9 -#define PACKET_VERSION 10 -#define PACKET_HDRLEN 11 -#define PACKET_RESERVE 12 -#define PACKET_TX_RING 13 -#define PACKET_LOSS 14 -#define PACKET_VNET_HDR 15 -#define PACKET_TX_TIMESTAMP 16 -#define PACKET_TIMESTAMP 17 -#define PACKET_FANOUT 18 - -#define PACKET_FANOUT_HASH 0 -#define PACKET_FANOUT_LB 1 -#define PACKET_FANOUT_CPU 2 -#define PACKET_FANOUT_FLAG_DEFRAG 0x8000 - -struct tpacket_stats { - unsigned int tp_packets; - unsigned int tp_drops; -}; - -struct tpacket_stats_v3 { - unsigned int tp_packets; - unsigned int tp_drops; - unsigned int tp_freeze_q_cnt; -}; - -union tpacket_stats_u { - struct tpacket_stats stats1; - struct tpacket_stats_v3 stats3; -}; - -struct tpacket_auxdata { - __u32 tp_status; - __u32 tp_len; - __u32 tp_snaplen; - __u16 tp_mac; - __u16 tp_net; - __u16 tp_vlan_tci; - __u16 tp_padding; -}; - -/* Rx ring - header status */ -#define TP_STATUS_KERNEL 0x0 -#define TP_STATUS_USER 0x1 -#define TP_STATUS_COPY 0x2 -#define TP_STATUS_LOSING 0x4 -#define TP_STATUS_CSUMNOTREADY 0x8 -#define TP_STATUS_VLAN_VALID 0x10 /* auxdata has valid tp_vlan_tci */ -#define TP_STATUS_BLK_TMO 0x20 - -/* Tx ring - header status */ -#define TP_STATUS_AVAILABLE 0x0 -#define TP_STATUS_SEND_REQUEST 0x1 -#define TP_STATUS_SENDING 0x2 -#define TP_STATUS_WRONG_FORMAT 0x4 - -/* Rx ring - feature request bits */ -#define TP_FT_REQ_FILL_RXHASH 0x1 - -struct tpacket_hdr { - unsigned long tp_status; - unsigned int tp_len; - unsigned int tp_snaplen; - unsigned short tp_mac; - unsigned short tp_net; - unsigned int tp_sec; - unsigned int tp_usec; -}; - -#define TPACKET_ALIGNMENT 16 -#define TPACKET_ALIGN(x) (((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1)) -#define TPACKET_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll)) - -struct tpacket2_hdr { - __u32 tp_status; - __u32 tp_len; - __u32 tp_snaplen; - __u16 tp_mac; - __u16 tp_net; - __u32 tp_sec; - __u32 tp_nsec; - __u16 tp_vlan_tci; - __u16 tp_padding; -}; - -struct tpacket_hdr_variant1 { - __u32 tp_rxhash; - __u32 tp_vlan_tci; -}; - -struct tpacket3_hdr { - __u32 tp_next_offset; - __u32 tp_sec; - __u32 tp_nsec; - __u32 tp_snaplen; - __u32 tp_len; - __u32 tp_status; - __u16 tp_mac; - __u16 tp_net; - /* pkt_hdr variants */ - union { - struct tpacket_hdr_variant1 hv1; - }; -}; - -struct tpacket_bd_ts { - unsigned int ts_sec; - union { - unsigned int ts_usec; - unsigned int ts_nsec; - }; -}; - -struct tpacket_hdr_v1 { - __u32 block_status; - __u32 num_pkts; - __u32 offset_to_first_pkt; - - /* Number of valid bytes (including padding) - * blk_len <= tp_block_size - */ - __u32 blk_len; - - /* - * Quite a few uses of sequence number: - * 1. Make sure cache flush etc worked. - * Well, one can argue - why not use the increasing ts below? - * But look at 2. below first. - * 2. When you pass around blocks to other user space decoders, - * you can see which blk[s] is[are] outstanding etc. - * 3. Validate kernel code. - */ - __aligned_u64 seq_num; - - /* - * ts_last_pkt: - * - * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out) - * ts_last_pkt == 'time-stamp of last packet' and NOT the - * time when the timer fired and the block was closed. - * By providing the ts of the last packet we can absolutely - * guarantee that time-stamp wise, the first packet in the - * next block will never precede the last packet of the - * previous block. - * Case 2. Block has zero packets and TMO'd - * ts_last_pkt = time when the timer fired and the block - * was closed. - * Case 3. Block has 'N' packets and NO TMO. - * ts_last_pkt = time-stamp of the last pkt in the block. - * - * ts_first_pkt: - * Is always the time-stamp when the block was opened. - * Case a) ZERO packets - * No packets to deal with but atleast you know the - * time-interval of this block. - * Case b) Non-zero packets - * Use the ts of the first packet in the block. - * - */ - struct tpacket_bd_ts ts_first_pkt, ts_last_pkt; -}; - -union tpacket_bd_header_u { - struct tpacket_hdr_v1 bh1; -}; - -struct tpacket_block_desc { - __u32 version; - __u32 offset_to_priv; - union tpacket_bd_header_u hdr; -}; - -#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll)) -#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll)) - -enum tpacket_versions { - TPACKET_V1, - TPACKET_V2, - TPACKET_V3 -}; - -/* - Frame structure: - - - Start. Frame must be aligned to TPACKET_ALIGNMENT=16 - - struct tpacket_hdr - - pad to TPACKET_ALIGNMENT=16 - - struct sockaddr_ll - - Gap, chosen so that packet data (Start+tp_net) alignes to TPACKET_ALIGNMENT=16 - - Start+tp_mac: [ Optional MAC header ] - - Start+tp_net: Packet data, aligned to TPACKET_ALIGNMENT=16. - - Pad to align to TPACKET_ALIGNMENT=16 - */ - -struct tpacket_req { - unsigned int tp_block_size; /* Minimal size of contiguous block */ - unsigned int tp_block_nr; /* Number of blocks */ - unsigned int tp_frame_size; /* Size of frame */ - unsigned int tp_frame_nr; /* Total number of frames */ -}; - -struct tpacket_req3 { - unsigned int tp_block_size; /* Minimal size of contiguous block */ - unsigned int tp_block_nr; /* Number of blocks */ - unsigned int tp_frame_size; /* Size of frame */ - unsigned int tp_frame_nr; /* Total number of frames */ - unsigned int tp_retire_blk_tov; /* timeout in msecs */ - unsigned int tp_sizeof_priv; /* offset to private data area */ - unsigned int tp_feature_req_word; -}; - -union tpacket_req_u { - struct tpacket_req req; - struct tpacket_req3 req3; -}; - -struct packet_mreq { - int mr_ifindex; - unsigned short mr_type; - unsigned short mr_alen; - unsigned char mr_address[8]; -}; - -#define PACKET_MR_MULTICAST 0 -#define PACKET_MR_PROMISC 1 -#define PACKET_MR_ALLMULTI 2 -#define PACKET_MR_UNICAST 3 - -#endif diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h index d70034bcec05..bbcdb0a767d8 100644 --- a/include/linux/if_phonet.h +++ b/include/linux/if_phonet.h @@ -8,12 +8,7 @@ #ifndef LINUX_IF_PHONET_H #define LINUX_IF_PHONET_H -#define PHONET_MIN_MTU 6 /* pn_length = 0 */ -#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */ -#define PHONET_DEV_MTU PHONET_MAX_MTU +#include -#ifdef __KERNEL__ extern struct header_ops phonet_header_ops; #endif - -#endif diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h deleted file mode 100644 index 6298c7e88b2b..000000000000 --- a/include/linux/if_plip.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * NET3 PLIP tuning facilities for the new Niibe PLIP. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#ifndef _LINUX_IF_PLIP_H -#define _LINUX_IF_PLIP_H - -#include - -#define SIOCDEVPLIP SIOCDEVPRIVATE - -struct plipconf { - unsigned short pcmd; - unsigned long nibble; - unsigned long trigger; -}; - -#define PLIP_GET_TIMEOUT 0x1 -#define PLIP_SET_TIMEOUT 0x2 - -#endif diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h deleted file mode 100644 index 9048fabb7a4e..000000000000 --- a/include/linux/if_ppp.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index b4775418d525..0fb71e532b2c 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -11,98 +11,11 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOL2TP_H #define __LINUX_IF_PPPOL2TP_H -#include - -#ifdef __KERNEL__ #include #include -#endif - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv4. - */ -struct pppol2tp_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv6. - */ -struct pppol2tpin6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct pppol2tpv3_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -struct pppol2tpv3in6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* Socket options: - * DEBUG - bitmask of debug message categories - * SENDSEQ - 0 => don't send packets with sequence numbers - * 1 => send packets with sequence numbers - * RECVSEQ - 0 => receive packet sequence numbers are optional - * 1 => drop receive packets without sequence numbers - * LNSMODE - 0 => act as LAC. - * 1 => act as LNS. - * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder. - */ -enum { - PPPOL2TP_SO_DEBUG = 1, - PPPOL2TP_SO_RECVSEQ = 2, - PPPOL2TP_SO_SENDSEQ = 3, - PPPOL2TP_SO_LNSMODE = 4, - PPPOL2TP_SO_REORDERTO = 5, -}; - -/* Debug message categories for the DEBUG socket option */ -enum { - PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if - * compiled in) */ - PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel - * interface */ - PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */ - PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */ -}; - - +#include #endif diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 09c474c480cd..aff7ad8a4ea3 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -12,153 +12,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOX_H #define __LINUX_IF_PPPOX_H - -#include -#include - -#include -#include -#ifdef __KERNEL__ #include #include #include -#endif /* __KERNEL__ */ -#include - -/* For user-space programs to pick up these definitions - * which they wouldn't get otherwise without defining __KERNEL__ - */ -#ifndef AF_PPPOX -#define AF_PPPOX 24 -#define PF_PPPOX AF_PPPOX -#endif /* !(AF_PPPOX) */ - -/************************************************************************ - * PPPoE addressing definition - */ -typedef __be16 sid_t; -struct pppoe_addr { - sid_t sid; /* Session identifier */ - unsigned char remote[ETH_ALEN]; /* Remote address */ - char dev[IFNAMSIZ]; /* Local device to use */ -}; - -/************************************************************************ - * PPTP addressing definition - */ -struct pptp_addr { - __be16 call_id; - struct in_addr sin_addr; -}; - -/************************************************************************ - * Protocols supported by AF_PPPOX - */ -#define PX_PROTO_OE 0 /* Currently just PPPoE */ -#define PX_PROTO_OL2TP 1 /* Now L2TP also */ -#define PX_PROTO_PPTP 2 -#define PX_MAX_PROTO 3 - -struct sockaddr_pppox { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - union { - struct pppoe_addr pppoe; - struct pptp_addr pptp; - } sa_addr; -} __packed; - -/* The use of the above union isn't viable because the size of this - * struct must stay fixed over time -- applications use sizeof(struct - * sockaddr_pppox) to fill it. We use a protocol specific sockaddr - * type instead. - */ -struct sockaddr_pppol2tp { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tp_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpin6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpin6_addr pppol2tp; -} __packed; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct sockaddr_pppol2tpv3 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpv3in6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3in6_addr pppol2tp; -} __packed; - -/********************************************************************* - * - * ioctl interface for defining forwarding of connections - * - ********************************************************************/ - -#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t) -#define PPPOEIOCDFWD _IO(0xB1 ,1) -/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/ - -/* Codes to identify message types */ -#define PADI_CODE 0x09 -#define PADO_CODE 0x07 -#define PADR_CODE 0x19 -#define PADS_CODE 0x65 -#define PADT_CODE 0xa7 -struct pppoe_tag { - __be16 tag_type; - __be16 tag_len; - char tag_data[0]; -} __attribute__ ((packed)); - -/* Tag identifiers */ -#define PTT_EOL __cpu_to_be16(0x0000) -#define PTT_SRV_NAME __cpu_to_be16(0x0101) -#define PTT_AC_NAME __cpu_to_be16(0x0102) -#define PTT_HOST_UNIQ __cpu_to_be16(0x0103) -#define PTT_AC_COOKIE __cpu_to_be16(0x0104) -#define PTT_VENDOR __cpu_to_be16(0x0105) -#define PTT_RELAY_SID __cpu_to_be16(0x0110) -#define PTT_SRV_ERR __cpu_to_be16(0x0201) -#define PTT_SYS_ERR __cpu_to_be16(0x0202) -#define PTT_GEN_ERR __cpu_to_be16(0x0203) - -struct pppoe_hdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; - __u8 type : 4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; - __u8 ver : 4; -#else -#error "Please fix " -#endif - __u8 code; - __be16 sid; - __be16 length; - struct pppoe_tag tag[0]; -} __packed; - -/* Length of entire PPPoE + PPP header */ -#define PPPOE_SES_HLEN 8 - -#ifdef __KERNEL__ #include +#include static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb) { @@ -232,6 +93,4 @@ enum { PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/ }; -#endif /* __KERNEL__ */ - #endif /* !(__LINUX_IF_PPPOX_H) */ diff --git a/include/linux/if_slip.h b/include/linux/if_slip.h deleted file mode 100644 index 1eb4e3a8397a..000000000000 --- a/include/linux/if_slip.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Swansea University Computer Society NET3 - * - * This file declares the constants of special use with the SLIP/CSLIP/ - * KISS TNC driver. - */ - -#ifndef __LINUX_SLIP_H -#define __LINUX_SLIP_H - -#define SL_MODE_SLIP 0 -#define SL_MODE_CSLIP 1 -#define SL_MODE_KISS 4 - -#define SL_OPT_SIXBIT 2 -#define SL_OPT_ADAPTIVE 8 - -/* - * VSV = ioctl for keepalive & outfill in SLIP driver - */ - -#define SIOCSKEEPALIVE (SIOCDEVPRIVATE) /* Set keepalive timeout in sec */ -#define SIOCGKEEPALIVE (SIOCDEVPRIVATE+1) /* Get keepalive timeout */ -#define SIOCSOUTFILL (SIOCDEVPRIVATE+2) /* Set outfill timeout */ -#define SIOCGOUTFILL (SIOCDEVPRIVATE+3) /* Get outfill timeout */ -#define SIOCSLEASE (SIOCDEVPRIVATE+4) /* Set "leased" line type */ -#define SIOCGLEASE (SIOCDEVPRIVATE+5) /* Get line type */ - - -#endif diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 6d88a7f57680..0245def2aa93 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -7,14 +7,13 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - #ifndef _LINUX_IF_TEAM_H_ #define _LINUX_IF_TEAM_H_ -#ifdef __KERNEL__ #include #include +#include struct team_pcpu_stats { u64 rx_packets; @@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode); #define TEAM_DEFAULT_NUM_TX_QUEUES 16 #define TEAM_DEFAULT_NUM_RX_QUEUES 16 -#endif /* __KERNEL__ */ - -#define TEAM_STRING_MAX_LEN 32 - -/********************************** - * NETLINK_GENERIC netlink family. - **********************************/ - -enum { - TEAM_CMD_NOOP, - TEAM_CMD_OPTIONS_SET, - TEAM_CMD_OPTIONS_GET, - TEAM_CMD_PORT_LIST_GET, - - __TEAM_CMD_MAX, - TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), -}; - -enum { - TEAM_ATTR_UNSPEC, - TEAM_ATTR_TEAM_IFINDEX, /* u32 */ - TEAM_ATTR_LIST_OPTION, /* nest */ - TEAM_ATTR_LIST_PORT, /* nest */ - - __TEAM_ATTR_MAX, - TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, -}; - -/* Nested layout of get/set msg: - * - * [TEAM_ATTR_LIST_OPTION] - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * ... - * [TEAM_ATTR_LIST_PORT] - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * ... - */ - -enum { - TEAM_ATTR_ITEM_OPTION_UNSPEC, - TEAM_ATTR_ITEM_OPTION, /* nest */ - - __TEAM_ATTR_ITEM_OPTION_MAX, - TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_OPTION_UNSPEC, - TEAM_ATTR_OPTION_NAME, /* string */ - TEAM_ATTR_OPTION_CHANGED, /* flag */ - TEAM_ATTR_OPTION_TYPE, /* u8 */ - TEAM_ATTR_OPTION_DATA, /* dynamic */ - TEAM_ATTR_OPTION_REMOVED, /* flag */ - TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ - TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ - - __TEAM_ATTR_OPTION_MAX, - TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_ITEM_PORT_UNSPEC, - TEAM_ATTR_ITEM_PORT, /* nest */ - - __TEAM_ATTR_ITEM_PORT_MAX, - TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, -}; - -enum { - TEAM_ATTR_PORT_UNSPEC, - TEAM_ATTR_PORT_IFINDEX, /* u32 */ - TEAM_ATTR_PORT_CHANGED, /* flag */ - TEAM_ATTR_PORT_LINKUP, /* flag */ - TEAM_ATTR_PORT_SPEED, /* u32 */ - TEAM_ATTR_PORT_DUPLEX, /* u8 */ - TEAM_ATTR_PORT_REMOVED, /* flag */ - - __TEAM_ATTR_PORT_MAX, - TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, -}; - -/* - * NETLINK_GENERIC related info - */ -#define TEAM_GENL_NAME "team" -#define TEAM_GENL_VERSION 0x1 -#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" - #endif /* _LINUX_IF_TEAM_H_ */ diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 06b1829731fd..ed6da2e6df90 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -12,86 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - #ifndef __IF_TUN_H #define __IF_TUN_H -#include -#include -#include - -/* Read queue size */ -#define TUN_READQ_SIZE 500 - -/* TUN device flags */ -#define TUN_TUN_DEV 0x0001 -#define TUN_TAP_DEV 0x0002 -#define TUN_TYPE_MASK 0x000f - -#define TUN_FASYNC 0x0010 -#define TUN_NOCHECKSUM 0x0020 -#define TUN_NO_PI 0x0040 -#define TUN_ONE_QUEUE 0x0080 -#define TUN_PERSIST 0x0100 -#define TUN_VNET_HDR 0x0200 - -/* Ioctl defines */ -#define TUNSETNOCSUM _IOW('T', 200, int) -#define TUNSETDEBUG _IOW('T', 201, int) -#define TUNSETIFF _IOW('T', 202, int) -#define TUNSETPERSIST _IOW('T', 203, int) -#define TUNSETOWNER _IOW('T', 204, int) -#define TUNSETLINK _IOW('T', 205, int) -#define TUNSETGROUP _IOW('T', 206, int) -#define TUNGETFEATURES _IOR('T', 207, unsigned int) -#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) -#define TUNSETTXFILTER _IOW('T', 209, unsigned int) -#define TUNGETIFF _IOR('T', 210, unsigned int) -#define TUNGETSNDBUF _IOR('T', 211, int) -#define TUNSETSNDBUF _IOW('T', 212, int) -#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) -#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) -#define TUNGETVNETHDRSZ _IOR('T', 215, int) -#define TUNSETVNETHDRSZ _IOW('T', 216, int) - -/* TUNSETIFF ifr flags */ -#define IFF_TUN 0x0001 -#define IFF_TAP 0x0002 -#define IFF_NO_PI 0x1000 -#define IFF_ONE_QUEUE 0x2000 -#define IFF_VNET_HDR 0x4000 -#define IFF_TUN_EXCL 0x8000 - -/* Features for GSO (TUNSETOFFLOAD). */ -#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ -#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ -#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ -#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ -#define TUN_F_UFO 0x10 /* I can handle UFO packets */ - -/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ -#define TUN_PKT_STRIP 0x0001 -struct tun_pi { - __u16 flags; - __be16 proto; -}; - -/* - * Filter spec (used for SETXXFILTER ioctls) - * This stuff is applicable only to the TAP (Ethernet) devices. - * If the count is zero the filter is disabled and the driver accepts - * all packets (promisc mode). - * If the filter is enabled in order to accept broadcast packets - * broadcast addr must be explicitly included in the addr list. - */ -#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ -struct tun_filter { - __u16 flags; /* TUN_FLT_ flags see above */ - __u16 count; /* Number of addresses */ - __u8 addr[0][ETH_ALEN]; -}; +#include -#ifdef __KERNEL__ #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); #else @@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f) return ERR_PTR(-EINVAL); } #endif /* CONFIG_TUN */ -#endif /* __KERNEL__ */ #endif /* __IF_TUN_H */ diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 8c5035ac3142..1cc595a67cc9 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -1,100 +1,8 @@ #ifndef _IF_TUNNEL_H_ #define _IF_TUNNEL_H_ -#include -#include - -#ifdef __KERNEL__ #include #include -#endif - -#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) -#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) -#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) -#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) -#define SIOCGETPRL (SIOCDEVPRIVATE + 4) -#define SIOCADDPRL (SIOCDEVPRIVATE + 5) -#define SIOCDELPRL (SIOCDEVPRIVATE + 6) -#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) -#define SIOCGET6RD (SIOCDEVPRIVATE + 8) -#define SIOCADD6RD (SIOCDEVPRIVATE + 9) -#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) -#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) - -#define GRE_CSUM __cpu_to_be16(0x8000) -#define GRE_ROUTING __cpu_to_be16(0x4000) -#define GRE_KEY __cpu_to_be16(0x2000) -#define GRE_SEQ __cpu_to_be16(0x1000) -#define GRE_STRICT __cpu_to_be16(0x0800) -#define GRE_REC __cpu_to_be16(0x0700) -#define GRE_FLAGS __cpu_to_be16(0x00F8) -#define GRE_VERSION __cpu_to_be16(0x0007) - -struct ip_tunnel_parm { - char name[IFNAMSIZ]; - int link; - __be16 i_flags; - __be16 o_flags; - __be32 i_key; - __be32 o_key; - struct iphdr iph; -}; - -/* SIT-mode i_flags */ -#define SIT_ISATAP 0x0001 - -struct ip_tunnel_prl { - __be32 addr; - __u16 flags; - __u16 __reserved; - __u32 datalen; - __u32 __reserved2; - /* data follows */ -}; - -/* PRL flags */ -#define PRL_DEFAULT 0x0001 - -struct ip_tunnel_6rd { - struct in6_addr prefix; - __be32 relay_prefix; - __u16 prefixlen; - __u16 relay_prefixlen; -}; - -enum { - IFLA_GRE_UNSPEC, - IFLA_GRE_LINK, - IFLA_GRE_IFLAGS, - IFLA_GRE_OFLAGS, - IFLA_GRE_IKEY, - IFLA_GRE_OKEY, - IFLA_GRE_LOCAL, - IFLA_GRE_REMOTE, - IFLA_GRE_TTL, - IFLA_GRE_TOS, - IFLA_GRE_PMTUDISC, - IFLA_GRE_ENCAP_LIMIT, - IFLA_GRE_FLOWINFO, - IFLA_GRE_FLAGS, - __IFLA_GRE_MAX, -}; - -#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) - -/* VTI-mode i_flags */ -#define VTI_ISVTI 0x0001 - -enum { - IFLA_VTI_UNSPEC, - IFLA_VTI_LINK, - IFLA_VTI_IKEY, - IFLA_VTI_OKEY, - IFLA_VTI_LOCAL, - IFLA_VTI_REMOTE, - __IFLA_VTI_MAX, -}; +#include -#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index c0ff748d0aa5..d06cc5c8f58c 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -9,15 +9,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef _LINUX_IF_VLAN_H_ #define _LINUX_IF_VLAN_H_ -#ifdef __KERNEL__ #include #include #include #include +#include #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) @@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb, */ skb->protocol = htons(ETH_P_802_2); } -#endif /* __KERNEL__ */ - -/* VLAN IOCTLs are found in sockios.h */ - -/* Passed in vlan_ioctl_args structure to determine behaviour. */ -enum vlan_ioctl_cmds { - ADD_VLAN_CMD, - DEL_VLAN_CMD, - SET_VLAN_INGRESS_PRIORITY_CMD, - SET_VLAN_EGRESS_PRIORITY_CMD, - GET_VLAN_INGRESS_PRIORITY_CMD, - GET_VLAN_EGRESS_PRIORITY_CMD, - SET_VLAN_NAME_TYPE_CMD, - SET_VLAN_FLAG_CMD, - GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ - GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ -}; - -enum vlan_flags { - VLAN_FLAG_REORDER_HDR = 0x1, - VLAN_FLAG_GVRP = 0x2, - VLAN_FLAG_LOOSE_BINDING = 0x4, -}; - -enum vlan_name_types { - VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ - VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ - VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ - VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ - VLAN_NAME_TYPE_HIGHEST -}; - -struct vlan_ioctl_args { - int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ - char device1[24]; - - union { - char device2[24]; - int VID; - unsigned int skb_priority; - unsigned int name_type; - unsigned int bind_type; - unsigned int flag; /* Matches vlan_dev_priv flags */ - } u; - - short vlan_qos; -}; - #endif /* !(_LINUX_IF_VLAN_H_) */ diff --git a/include/linux/if_x25.h b/include/linux/if_x25.h deleted file mode 100644 index 897765f5feb8..000000000000 --- a/include/linux/if_x25.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Linux X.25 packet to device interface - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _IF_X25_H -#define _IF_X25_H - -#include - -/* Documentation/networking/x25-iface.txt */ -#define X25_IFACE_DATA 0x00 -#define X25_IFACE_CONNECT 0x01 -#define X25_IFACE_DISCONNECT 0x02 -#define X25_IFACE_PARAMS 0x03 - -#endif /* _IF_X25_H */ diff --git a/include/linux/igmp.h b/include/linux/igmp.h index 82de336b8155..7f2bf1518480 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -12,123 +12,13 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IGMP_H #define _LINUX_IGMP_H -#include -#include - -/* - * IGMP protocol structures - */ - -/* - * Header in on cable format - */ - -struct igmphdr { - __u8 type; - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; -}; - -/* V3 group record types [grec_type] */ -#define IGMPV3_MODE_IS_INCLUDE 1 -#define IGMPV3_MODE_IS_EXCLUDE 2 -#define IGMPV3_CHANGE_TO_INCLUDE 3 -#define IGMPV3_CHANGE_TO_EXCLUDE 4 -#define IGMPV3_ALLOW_NEW_SOURCES 5 -#define IGMPV3_BLOCK_OLD_SOURCES 6 - -struct igmpv3_grec { - __u8 grec_type; - __u8 grec_auxwords; - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; -}; - -struct igmpv3_report { - __u8 type; - __u8 resv1; - __be16 csum; - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; -}; - -struct igmpv3_query { - __u8 type; - __u8 code; - __be16 csum; - __be32 group; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 qrv:3, - suppress:1, - resv:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 resv:4, - suppress:1, - qrv:3; -#else -#error "Please fix " -#endif - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; -}; - -#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ -#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ -#define IGMP_DVMRP 0x13 /* DVMRP routing */ -#define IGMP_PIM 0x14 /* PIM routing */ -#define IGMP_TRACE 0x15 -#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */ -#define IGMP_HOST_LEAVE_MESSAGE 0x17 -#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */ - -#define IGMP_MTRACE_RESP 0x1e -#define IGMP_MTRACE 0x1f - - -/* - * Use the BSD names for these for compatibility - */ - -#define IGMP_DELAYING_MEMBER 0x01 -#define IGMP_IDLE_MEMBER 0x02 -#define IGMP_LAZY_MEMBER 0x03 -#define IGMP_SLEEPING_MEMBER 0x04 -#define IGMP_AWAKENING_MEMBER 0x05 - -#define IGMP_MINLEN 8 - -#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */ - /* query (in seconds) */ - -#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */ - /* specifies time in 10th of seconds */ - -#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */ - /* message in this period of time, */ - /* revert to IGMP v2 router. */ - -#define IGMP_ALL_HOSTS htonl(0xE0000001L) -#define IGMP_ALL_ROUTER htonl(0xE0000002L) -#define IGMPV3_ALL_MCR htonl(0xE0000016L) -#define IGMP_LOCAL_GROUP htonl(0xE0000000L) -#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L) - -/* - * struct for keeping the multicast list in - */ - -#ifdef __KERNEL__ #include #include #include +#include static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb) { @@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr); extern void ip_mc_rejoin_groups(struct in_device *in_dev); #endif -#endif diff --git a/include/linux/in.h b/include/linux/in.h index e0337f11d92e..31b493734763 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -18,240 +18,9 @@ #ifndef _LINUX_IN_H #define _LINUX_IN_H -#include -#include - -/* Standard well-defined IP protocols. */ -enum { - IPPROTO_IP = 0, /* Dummy protocol for TCP */ - IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ - IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ - IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ - IPPROTO_TCP = 6, /* Transmission Control Protocol */ - IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ - IPPROTO_PUP = 12, /* PUP protocol */ - IPPROTO_UDP = 17, /* User Datagram Protocol */ - IPPROTO_IDP = 22, /* XNS IDP protocol */ - IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ - IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ - IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ - IPPROTO_MAX -}; - - -/* Internet address. */ -struct in_addr { - __be32 s_addr; -}; - -#define IP_TOS 1 -#define IP_TTL 2 -#define IP_HDRINCL 3 -#define IP_OPTIONS 4 -#define IP_ROUTER_ALERT 5 -#define IP_RECVOPTS 6 -#define IP_RETOPTS 7 -#define IP_PKTINFO 8 -#define IP_PKTOPTIONS 9 -#define IP_MTU_DISCOVER 10 -#define IP_RECVERR 11 -#define IP_RECVTTL 12 -#define IP_RECVTOS 13 -#define IP_MTU 14 -#define IP_FREEBIND 15 -#define IP_IPSEC_POLICY 16 -#define IP_XFRM_POLICY 17 -#define IP_PASSSEC 18 -#define IP_TRANSPARENT 19 - -/* BSD compatibility */ -#define IP_RECVRETOPTS IP_RETOPTS - -/* TProxy original addresses */ -#define IP_ORIGDSTADDR 20 -#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR - -#define IP_MINTTL 21 -#define IP_NODEFRAG 22 - -/* IP_MTU_DISCOVER values */ -#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ -#define IP_PMTUDISC_WANT 1 /* Use per route hints */ -#define IP_PMTUDISC_DO 2 /* Always DF */ -#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ - -#define IP_MULTICAST_IF 32 -#define IP_MULTICAST_TTL 33 -#define IP_MULTICAST_LOOP 34 -#define IP_ADD_MEMBERSHIP 35 -#define IP_DROP_MEMBERSHIP 36 -#define IP_UNBLOCK_SOURCE 37 -#define IP_BLOCK_SOURCE 38 -#define IP_ADD_SOURCE_MEMBERSHIP 39 -#define IP_DROP_SOURCE_MEMBERSHIP 40 -#define IP_MSFILTER 41 -#define MCAST_JOIN_GROUP 42 -#define MCAST_BLOCK_SOURCE 43 -#define MCAST_UNBLOCK_SOURCE 44 -#define MCAST_LEAVE_GROUP 45 -#define MCAST_JOIN_SOURCE_GROUP 46 -#define MCAST_LEAVE_SOURCE_GROUP 47 -#define MCAST_MSFILTER 48 -#define IP_MULTICAST_ALL 49 -#define IP_UNICAST_IF 50 - -#define MCAST_EXCLUDE 0 -#define MCAST_INCLUDE 1 - -/* These need to appear somewhere around here */ -#define IP_DEFAULT_MULTICAST_TTL 1 -#define IP_DEFAULT_MULTICAST_LOOP 1 - -/* Request struct for multicast socket ops */ - -struct ip_mreq { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_interface; /* local IP address of interface */ -}; - -struct ip_mreqn { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_address; /* local IP address of interface */ - int imr_ifindex; /* Interface index */ -}; - -struct ip_mreq_source { - __be32 imr_multiaddr; - __be32 imr_interface; - __be32 imr_sourceaddr; -}; - -struct ip_msfilter { - __be32 imsf_multiaddr; - __be32 imsf_interface; - __u32 imsf_fmode; - __u32 imsf_numsrc; - __be32 imsf_slist[1]; -}; - -#define IP_MSFILTER_SIZE(numsrc) \ - (sizeof(struct ip_msfilter) - sizeof(__u32) \ - + (numsrc) * sizeof(__u32)) - -struct group_req { - __u32 gr_interface; /* interface index */ - struct __kernel_sockaddr_storage gr_group; /* group address */ -}; - -struct group_source_req { - __u32 gsr_interface; /* interface index */ - struct __kernel_sockaddr_storage gsr_group; /* group address */ - struct __kernel_sockaddr_storage gsr_source; /* source address */ -}; - -struct group_filter { - __u32 gf_interface; /* interface index */ - struct __kernel_sockaddr_storage gf_group; /* multicast address */ - __u32 gf_fmode; /* filter mode */ - __u32 gf_numsrc; /* number of sources */ - struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ -}; - -#define GROUP_FILTER_SIZE(numsrc) \ - (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ - + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) - -struct in_pktinfo { - int ipi_ifindex; - struct in_addr ipi_spec_dst; - struct in_addr ipi_addr; -}; - -/* Structure describing an Internet (IP) socket address. */ -#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ -struct sockaddr_in { - __kernel_sa_family_t sin_family; /* Address family */ - __be16 sin_port; /* Port number */ - struct in_addr sin_addr; /* Internet address */ - - /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - - sizeof(unsigned short int) - sizeof(struct in_addr)]; -}; -#define sin_zero __pad /* for BSD UNIX comp. -FvK */ - - -/* - * Definitions of the bits in an Internet address integer. - * On subnets, host and network parts are found according - * to the subnet mask, not these masks. - */ -#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) -#define IN_CLASSA_NET 0xff000000 -#define IN_CLASSA_NSHIFT 24 -#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) -#define IN_CLASSA_MAX 128 - -#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) -#define IN_CLASSB_NET 0xffff0000 -#define IN_CLASSB_NSHIFT 16 -#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) -#define IN_CLASSB_MAX 65536 - -#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) -#define IN_CLASSC_NET 0xffffff00 -#define IN_CLASSC_NSHIFT 8 -#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) - -#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) -#define IN_MULTICAST(a) IN_CLASSD(a) -#define IN_MULTICAST_NET 0xF0000000 - -#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) -#define IN_BADCLASS(a) IN_EXPERIMENTAL((a)) - -/* Address to accept any incoming messages. */ -#define INADDR_ANY ((unsigned long int) 0x00000000) - -/* Address to send to all hosts. */ -#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) - -/* Address indicating an error return. */ -#define INADDR_NONE ((unsigned long int) 0xffffffff) - -/* Network number for local host loopback. */ -#define IN_LOOPBACKNET 127 - -/* Address to loopback in software to local host. */ -#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ -#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) - -/* Defines for Multicast INADDR */ -#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ -#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ -#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ -#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ - - -/* contains the htonl type stuff.. */ -#include - -#ifdef __KERNEL__ #include +#include static inline int proto_ports_offset(int proto) { @@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr) { return (addr & htonl(0xfffe0000)) == htonl(0xc6120000); } -#endif - #endif /* _LINUX_IN_H */ diff --git a/include/linux/in6.h b/include/linux/in6.h index cba469ba11a4..9e2ae26fb598 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -17,32 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IN6_H #define _LINUX_IN6_H -#include - -/* - * IPv6 address structure - */ - -struct in6_addr { - union { - __u8 u6_addr8[16]; - __be16 u6_addr16[8]; - __be32 u6_addr32[4]; - } in6_u; -#define s6_addr in6_u.u6_addr8 -#define s6_addr16 in6_u.u6_addr16 -#define s6_addr32 in6_u.u6_addr32 -}; +#include -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ -#ifdef __KERNEL__ extern const struct in6_addr in6addr_any; #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } } extern const struct in6_addr in6addr_loopback; @@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters; #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \ { { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } #endif - -struct sockaddr_in6 { - unsigned short int sin6_family; /* AF_INET6 */ - __be16 sin6_port; /* Transport layer port # */ - __be32 sin6_flowinfo; /* IPv6 flow information */ - struct in6_addr sin6_addr; /* IPv6 address */ - __u32 sin6_scope_id; /* scope id (new in RFC2553) */ -}; - -struct ipv6_mreq { - /* IPv6 multicast address of group */ - struct in6_addr ipv6mr_multiaddr; - - /* local IPv6 address of interface */ - int ipv6mr_ifindex; -}; - -#define ipv6mr_acaddr ipv6mr_multiaddr - -struct in6_flowlabel_req { - struct in6_addr flr_dst; - __be32 flr_label; - __u8 flr_action; - __u8 flr_share; - __u16 flr_flags; - __u16 flr_expires; - __u16 flr_linger; - __u32 __flr_pad; - /* Options in format of IPV6_PKTOPTIONS */ -}; - -#define IPV6_FL_A_GET 0 -#define IPV6_FL_A_PUT 1 -#define IPV6_FL_A_RENEW 2 - -#define IPV6_FL_F_CREATE 1 -#define IPV6_FL_F_EXCL 2 - -#define IPV6_FL_S_NONE 0 -#define IPV6_FL_S_EXCL 1 -#define IPV6_FL_S_PROCESS 2 -#define IPV6_FL_S_USER 3 -#define IPV6_FL_S_ANY 255 - - -/* - * Bitmask constant declarations to help applications select out the - * flow label and priority fields. - * - * Note that this are in host byte order while the flowinfo field of - * sockaddr_in6 is in network byte order. - */ - -#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff -#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 - -/* These definitions are obsolete */ -#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 -#define IPV6_PRIORITY_FILLER 0x0100 -#define IPV6_PRIORITY_UNATTENDED 0x0200 -#define IPV6_PRIORITY_RESERVED1 0x0300 -#define IPV6_PRIORITY_BULK 0x0400 -#define IPV6_PRIORITY_RESERVED2 0x0500 -#define IPV6_PRIORITY_INTERACTIVE 0x0600 -#define IPV6_PRIORITY_CONTROL 0x0700 -#define IPV6_PRIORITY_8 0x0800 -#define IPV6_PRIORITY_9 0x0900 -#define IPV6_PRIORITY_10 0x0a00 -#define IPV6_PRIORITY_11 0x0b00 -#define IPV6_PRIORITY_12 0x0c00 -#define IPV6_PRIORITY_13 0x0d00 -#define IPV6_PRIORITY_14 0x0e00 -#define IPV6_PRIORITY_15 0x0f00 - -/* - * IPV6 extension headers - */ -#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ -#define IPPROTO_ROUTING 43 /* IPv6 routing header */ -#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ -#define IPPROTO_ICMPV6 58 /* ICMPv6 */ -#define IPPROTO_NONE 59 /* IPv6 no next header */ -#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ -#define IPPROTO_MH 135 /* IPv6 mobility header */ - -/* - * IPv6 TLV options. - */ -#define IPV6_TLV_PAD1 0 -#define IPV6_TLV_PADN 1 -#define IPV6_TLV_ROUTERALERT 5 -#define IPV6_TLV_JUMBO 194 -#define IPV6_TLV_HAO 201 /* home address option */ - -/* - * IPV6 socket options - */ - -#define IPV6_ADDRFORM 1 -#define IPV6_2292PKTINFO 2 -#define IPV6_2292HOPOPTS 3 -#define IPV6_2292DSTOPTS 4 -#define IPV6_2292RTHDR 5 -#define IPV6_2292PKTOPTIONS 6 -#define IPV6_CHECKSUM 7 -#define IPV6_2292HOPLIMIT 8 -#define IPV6_NEXTHOP 9 -#define IPV6_AUTHHDR 10 /* obsolete */ -#define IPV6_FLOWINFO 11 - -#define IPV6_UNICAST_HOPS 16 -#define IPV6_MULTICAST_IF 17 -#define IPV6_MULTICAST_HOPS 18 -#define IPV6_MULTICAST_LOOP 19 -#define IPV6_ADD_MEMBERSHIP 20 -#define IPV6_DROP_MEMBERSHIP 21 -#define IPV6_ROUTER_ALERT 22 -#define IPV6_MTU_DISCOVER 23 -#define IPV6_MTU 24 -#define IPV6_RECVERR 25 -#define IPV6_V6ONLY 26 -#define IPV6_JOIN_ANYCAST 27 -#define IPV6_LEAVE_ANYCAST 28 - -/* IPV6_MTU_DISCOVER values */ -#define IPV6_PMTUDISC_DONT 0 -#define IPV6_PMTUDISC_WANT 1 -#define IPV6_PMTUDISC_DO 2 -#define IPV6_PMTUDISC_PROBE 3 - -/* Flowlabel */ -#define IPV6_FLOWLABEL_MGR 32 -#define IPV6_FLOWINFO_SEND 33 - -#define IPV6_IPSEC_POLICY 34 -#define IPV6_XFRM_POLICY 35 - -/* - * Multicast: - * Following socket options are shared between IPv4 and IPv6. - * - * MCAST_JOIN_GROUP 42 - * MCAST_BLOCK_SOURCE 43 - * MCAST_UNBLOCK_SOURCE 44 - * MCAST_LEAVE_GROUP 45 - * MCAST_JOIN_SOURCE_GROUP 46 - * MCAST_LEAVE_SOURCE_GROUP 47 - * MCAST_MSFILTER 48 - */ - -/* - * Advanced API (RFC3542) (1) - * - * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. - */ - -#define IPV6_RECVPKTINFO 49 -#define IPV6_PKTINFO 50 -#define IPV6_RECVHOPLIMIT 51 -#define IPV6_HOPLIMIT 52 -#define IPV6_RECVHOPOPTS 53 -#define IPV6_HOPOPTS 54 -#define IPV6_RTHDRDSTOPTS 55 -#define IPV6_RECVRTHDR 56 -#define IPV6_RTHDR 57 -#define IPV6_RECVDSTOPTS 58 -#define IPV6_DSTOPTS 59 -#define IPV6_RECVPATHMTU 60 -#define IPV6_PATHMTU 61 -#define IPV6_DONTFRAG 62 -#if 0 /* not yet */ -#define IPV6_USE_MIN_MTU 63 -#endif - -/* - * Netfilter (1) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 - * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 - */ - -/* - * Advanced API (RFC3542) (2) - */ -#define IPV6_RECVTCLASS 66 -#define IPV6_TCLASS 67 - -/* - * Netfilter (2) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_GET_REVISION_MATCH 68 - * IP6T_SO_GET_REVISION_TARGET 69 - */ - -/* RFC5014: Source address selection */ -#define IPV6_ADDR_PREFERENCES 72 - -#define IPV6_PREFER_SRC_TMP 0x0001 -#define IPV6_PREFER_SRC_PUBLIC 0x0002 -#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 -#define IPV6_PREFER_SRC_COA 0x0004 -#define IPV6_PREFER_SRC_HOME 0x0400 -#define IPV6_PREFER_SRC_CGA 0x0008 -#define IPV6_PREFER_SRC_NONCGA 0x0800 - -/* RFC5082: Generalized Ttl Security Mechanism */ -#define IPV6_MINHOPCOUNT 73 - -#define IPV6_ORIGDSTADDR 74 -#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR -#define IPV6_TRANSPARENT 75 -#define IPV6_UNICAST_IF 76 - -/* - * Multicast Routing: - * see include/linux/mroute6.h. - * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 - */ -#endif diff --git a/include/linux/in_route.h b/include/linux/in_route.h deleted file mode 100644 index b261b8c915f0..000000000000 --- a/include/linux/in_route.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _LINUX_IN_ROUTE_H -#define _LINUX_IN_ROUTE_H - -/* IPv4 routing cache flags */ - -#define RTCF_DEAD RTNH_F_DEAD -#define RTCF_ONLINK RTNH_F_ONLINK - -/* Obsolete flag. About to be deleted */ -#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC - -#define RTCF_NOTIFY 0x00010000 -#define RTCF_DIRECTDST 0x00020000 /* unused */ -#define RTCF_REDIRECTED 0x00040000 -#define RTCF_TPROXY 0x00080000 /* unused */ - -#define RTCF_FAST 0x00200000 /* unused */ -#define RTCF_MASQ 0x00400000 /* unused */ -#define RTCF_SNAT 0x00800000 /* unused */ -#define RTCF_DOREDIRECT 0x01000000 -#define RTCF_DIRECTSRC 0x04000000 -#define RTCF_DNAT 0x08000000 -#define RTCF_BROADCAST 0x10000000 -#define RTCF_MULTICAST 0x20000000 -#define RTCF_REJECT 0x40000000 /* unused */ -#define RTCF_LOCAL 0x80000000 - -#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT) - -#define RT_TOS(tos) ((tos)&IPTOS_TOS_MASK) - -#endif /* _LINUX_IN_ROUTE_H */ diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index e788c186ed3a..46da02410a09 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -1,138 +1,8 @@ #ifndef _INET_DIAG_H_ #define _INET_DIAG_H_ 1 -#include +#include -/* Just some random number */ -#define TCPDIAG_GETSOCK 18 -#define DCCPDIAG_GETSOCK 19 - -#define INET_DIAG_GETSOCK_MAX 24 - -/* Socket identity */ -struct inet_diag_sockid { - __be16 idiag_sport; - __be16 idiag_dport; - __be32 idiag_src[4]; - __be32 idiag_dst[4]; - __u32 idiag_if; - __u32 idiag_cookie[2]; -#define INET_DIAG_NOCOOKIE (~0U) -}; - -/* Request structure */ - -struct inet_diag_req { - __u8 idiag_family; /* Family of addresses. */ - __u8 idiag_src_len; - __u8 idiag_dst_len; - __u8 idiag_ext; /* Query extended information */ - - struct inet_diag_sockid id; - - __u32 idiag_states; /* States to dump */ - __u32 idiag_dbs; /* Tables to dump (NI) */ -}; - -struct inet_diag_req_v2 { - __u8 sdiag_family; - __u8 sdiag_protocol; - __u8 idiag_ext; - __u8 pad; - __u32 idiag_states; - struct inet_diag_sockid id; -}; - -enum { - INET_DIAG_REQ_NONE, - INET_DIAG_REQ_BYTECODE, -}; - -#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE - -/* Bytecode is sequence of 4 byte commands followed by variable arguments. - * All the commands identified by "code" are conditional jumps forward: - * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be - * length of the command and its arguments. - */ - -struct inet_diag_bc_op { - unsigned char code; - unsigned char yes; - unsigned short no; -}; - -enum { - INET_DIAG_BC_NOP, - INET_DIAG_BC_JMP, - INET_DIAG_BC_S_GE, - INET_DIAG_BC_S_LE, - INET_DIAG_BC_D_GE, - INET_DIAG_BC_D_LE, - INET_DIAG_BC_AUTO, - INET_DIAG_BC_S_COND, - INET_DIAG_BC_D_COND, -}; - -struct inet_diag_hostcond { - __u8 family; - __u8 prefix_len; - int port; - __be32 addr[0]; -}; - -/* Base info structure. It contains socket identity (addrs/ports/cookie) - * and, alas, the information shown by netstat. */ -struct inet_diag_msg { - __u8 idiag_family; - __u8 idiag_state; - __u8 idiag_timer; - __u8 idiag_retrans; - - struct inet_diag_sockid id; - - __u32 idiag_expires; - __u32 idiag_rqueue; - __u32 idiag_wqueue; - __u32 idiag_uid; - __u32 idiag_inode; -}; - -/* Extensions */ - -enum { - INET_DIAG_NONE, - INET_DIAG_MEMINFO, - INET_DIAG_INFO, - INET_DIAG_VEGASINFO, - INET_DIAG_CONG, - INET_DIAG_TOS, - INET_DIAG_TCLASS, - INET_DIAG_SKMEMINFO, -}; - -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO - - -/* INET_DIAG_MEM */ - -struct inet_diag_meminfo { - __u32 idiag_rmem; - __u32 idiag_wmem; - __u32 idiag_fmem; - __u32 idiag_tmem; -}; - -/* INET_DIAG_VEGASINFO */ - -struct tcpvegas_info { - __u32 tcpv_enabled; - __u32 tcpv_rttcnt; - __u32 tcpv_rtt; - __u32 tcpv_minrtt; -}; - -#ifdef __KERNEL__ struct sock; struct inet_hashinfo; struct nlattr; @@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk); extern int inet_diag_register(const struct inet_diag_handler *handler); extern void inet_diag_unregister(const struct inet_diag_handler *handler); -#endif /* __KERNEL__ */ - #endif /* _INET_DIAG_H_ */ diff --git a/include/linux/inotify.h b/include/linux/inotify.h index d33041e2a42a..23aede0b5843 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -3,75 +3,12 @@ * * Copyright (C) 2005 John McCutchan */ - #ifndef _LINUX_INOTIFY_H #define _LINUX_INOTIFY_H -/* For O_CLOEXEC and O_NONBLOCK */ -#include -#include - -/* - * struct inotify_event - structure read from the inotify device for each event - * - * When you are watching a directory, you will receive the filename for events - * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd. - */ -struct inotify_event { - __s32 wd; /* watch descriptor */ - __u32 mask; /* watch mask */ - __u32 cookie; /* cookie to synchronize two events */ - __u32 len; /* length (including nulls) of name */ - char name[0]; /* stub for possible name */ -}; - -/* the following are legal, implemented events that user-space can watch for */ -#define IN_ACCESS 0x00000001 /* File was accessed */ -#define IN_MODIFY 0x00000002 /* File was modified */ -#define IN_ATTRIB 0x00000004 /* Metadata changed */ -#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */ -#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define IN_OPEN 0x00000020 /* File was opened */ -#define IN_MOVED_FROM 0x00000040 /* File was moved from X */ -#define IN_MOVED_TO 0x00000080 /* File was moved to Y */ -#define IN_CREATE 0x00000100 /* Subfile was created */ -#define IN_DELETE 0x00000200 /* Subfile was deleted */ -#define IN_DELETE_SELF 0x00000400 /* Self was deleted */ -#define IN_MOVE_SELF 0x00000800 /* Self was moved */ - -/* the following are legal events. they are sent as needed to any watch */ -#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */ -#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ -#define IN_IGNORED 0x00008000 /* File was ignored */ - -/* helper events */ -#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */ -#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */ - -/* special flags */ -#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */ -#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */ -#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */ -#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */ -#define IN_ISDIR 0x40000000 /* event occurred against dir */ -#define IN_ONESHOT 0x80000000 /* only send event once */ - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ - IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \ - IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \ - IN_MOVE_SELF) - -/* Flags for sys_inotify_init1. */ -#define IN_CLOEXEC O_CLOEXEC -#define IN_NONBLOCK O_NONBLOCK - -#ifdef __KERNEL__ #include +#include + extern struct ctl_table inotify_table[]; /* for sysctl */ #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ @@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */ IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \ IN_ISDIR | IN_ONESHOT) -#endif - #endif /* _LINUX_INOTIFY_H */ diff --git a/include/linux/input.h b/include/linux/input.h index 15464ba6bf53..cab994ba6d91 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1,6 +1,3 @@ -#ifndef _INPUT_H -#define _INPUT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,1156 +5,15 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _INPUT_H +#define _INPUT_H -#ifdef __KERNEL__ #include #include -#else -#include -#include -#include -#include -#endif - -/* - * The event structure itself - */ - -struct input_event { - struct timeval time; - __u16 type; - __u16 code; - __s32 value; -}; - -/* - * Protocol version. - */ - -#define EV_VERSION 0x010001 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -struct input_id { - __u16 bustype; - __u16 vendor; - __u16 product; - __u16 version; -}; - -/** - * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls - * @value: latest reported value for the axis. - * @minimum: specifies minimum value for the axis. - * @maximum: specifies maximum value for the axis. - * @fuzz: specifies fuzz value that is used to filter noise from - * the event stream. - * @flat: values that are within this value will be discarded by - * joydev interface and reported as 0 instead. - * @resolution: specifies resolution for the values reported for - * the axis. - * - * Note that input core does not clamp reported values to the - * [minimum, maximum] limits, such task is left to userspace. - * - * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in - * units per millimeter (units/mm), resolution for rotational axes - * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. - */ -struct input_absinfo { - __s32 value; - __s32 minimum; - __s32 maximum; - __s32 fuzz; - __s32 flat; - __s32 resolution; -}; - -/** - * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls - * @scancode: scancode represented in machine-endian form. - * @len: length of the scancode that resides in @scancode buffer. - * @index: index in the keymap, may be used instead of scancode - * @flags: allows to specify how kernel should handle the request. For - * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel - * should perform lookup in keymap by @index instead of @scancode - * @keycode: key code assigned to this scancode - * - * The structure is used to retrieve and modify keymap data. Users have - * option of performing lookup either by @scancode itself or by @index - * in keymap entry. EVIOCGKEYCODE will also return scancode or index - * (depending on which element was used to perform lookup). - */ -struct input_keymap_entry { -#define INPUT_KEYMAP_BY_INDEX (1 << 0) - __u8 flags; - __u8 len; - __u16 index; - __u32 keycode; - __u8 scancode[32]; -}; - -#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ -#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ -#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ -#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ - -#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ -#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) -#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ -#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) - -#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ -#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ -#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ -#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ - -/** - * EVIOCGMTSLOTS(len) - get MT slot values - * @len: size of the data buffer in bytes - * - * The ioctl buffer argument should be binary equivalent to - * - * struct input_mt_request_layout { - * __u32 code; - * __s32 values[num_slots]; - * }; - * - * where num_slots is the (arbitrary) number of MT slots to extract. - * - * The ioctl size argument (len) is the size of the buffer, which - * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is - * too small to fit all available slots, the first num_slots are - * returned. - * - * Before the call, code is set to the wanted ABS_MT event type. On - * return, values[] is filled with the slot values for the specified - * ABS_MT code. - * - * If the request code is not an ABS_MT value, -EINVAL is returned. - */ -#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) - -#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ -#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ -#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ -#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ - -#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ -#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ -#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ - -#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ -#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ -#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ - -#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ - -#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ - -/* - * Device properties and quirks - */ - -#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ -#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ -#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ -#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ - -#define INPUT_PROP_MAX 0x1f -#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) - -/* - * Event types - */ - -#define EV_SYN 0x00 -#define EV_KEY 0x01 -#define EV_REL 0x02 -#define EV_ABS 0x03 -#define EV_MSC 0x04 -#define EV_SW 0x05 -#define EV_LED 0x11 -#define EV_SND 0x12 -#define EV_REP 0x14 -#define EV_FF 0x15 -#define EV_PWR 0x16 -#define EV_FF_STATUS 0x17 -#define EV_MAX 0x1f -#define EV_CNT (EV_MAX+1) - -/* - * Synchronization events. - */ - -#define SYN_REPORT 0 -#define SYN_CONFIG 1 -#define SYN_MT_REPORT 2 -#define SYN_DROPPED 3 - -/* - * Keys and buttons - * - * Most of the keys/buttons are modeled after USB HUT 1.12 - * (see http://www.usb.org/developers/hidpage). - * Abbreviations in the comments: - * AC - Application Control - * AL - Application Launch Button - * SC - System Control - */ - -#define KEY_RESERVED 0 -#define KEY_ESC 1 -#define KEY_1 2 -#define KEY_2 3 -#define KEY_3 4 -#define KEY_4 5 -#define KEY_5 6 -#define KEY_6 7 -#define KEY_7 8 -#define KEY_8 9 -#define KEY_9 10 -#define KEY_0 11 -#define KEY_MINUS 12 -#define KEY_EQUAL 13 -#define KEY_BACKSPACE 14 -#define KEY_TAB 15 -#define KEY_Q 16 -#define KEY_W 17 -#define KEY_E 18 -#define KEY_R 19 -#define KEY_T 20 -#define KEY_Y 21 -#define KEY_U 22 -#define KEY_I 23 -#define KEY_O 24 -#define KEY_P 25 -#define KEY_LEFTBRACE 26 -#define KEY_RIGHTBRACE 27 -#define KEY_ENTER 28 -#define KEY_LEFTCTRL 29 -#define KEY_A 30 -#define KEY_S 31 -#define KEY_D 32 -#define KEY_F 33 -#define KEY_G 34 -#define KEY_H 35 -#define KEY_J 36 -#define KEY_K 37 -#define KEY_L 38 -#define KEY_SEMICOLON 39 -#define KEY_APOSTROPHE 40 -#define KEY_GRAVE 41 -#define KEY_LEFTSHIFT 42 -#define KEY_BACKSLASH 43 -#define KEY_Z 44 -#define KEY_X 45 -#define KEY_C 46 -#define KEY_V 47 -#define KEY_B 48 -#define KEY_N 49 -#define KEY_M 50 -#define KEY_COMMA 51 -#define KEY_DOT 52 -#define KEY_SLASH 53 -#define KEY_RIGHTSHIFT 54 -#define KEY_KPASTERISK 55 -#define KEY_LEFTALT 56 -#define KEY_SPACE 57 -#define KEY_CAPSLOCK 58 -#define KEY_F1 59 -#define KEY_F2 60 -#define KEY_F3 61 -#define KEY_F4 62 -#define KEY_F5 63 -#define KEY_F6 64 -#define KEY_F7 65 -#define KEY_F8 66 -#define KEY_F9 67 -#define KEY_F10 68 -#define KEY_NUMLOCK 69 -#define KEY_SCROLLLOCK 70 -#define KEY_KP7 71 -#define KEY_KP8 72 -#define KEY_KP9 73 -#define KEY_KPMINUS 74 -#define KEY_KP4 75 -#define KEY_KP5 76 -#define KEY_KP6 77 -#define KEY_KPPLUS 78 -#define KEY_KP1 79 -#define KEY_KP2 80 -#define KEY_KP3 81 -#define KEY_KP0 82 -#define KEY_KPDOT 83 - -#define KEY_ZENKAKUHANKAKU 85 -#define KEY_102ND 86 -#define KEY_F11 87 -#define KEY_F12 88 -#define KEY_RO 89 -#define KEY_KATAKANA 90 -#define KEY_HIRAGANA 91 -#define KEY_HENKAN 92 -#define KEY_KATAKANAHIRAGANA 93 -#define KEY_MUHENKAN 94 -#define KEY_KPJPCOMMA 95 -#define KEY_KPENTER 96 -#define KEY_RIGHTCTRL 97 -#define KEY_KPSLASH 98 -#define KEY_SYSRQ 99 -#define KEY_RIGHTALT 100 -#define KEY_LINEFEED 101 -#define KEY_HOME 102 -#define KEY_UP 103 -#define KEY_PAGEUP 104 -#define KEY_LEFT 105 -#define KEY_RIGHT 106 -#define KEY_END 107 -#define KEY_DOWN 108 -#define KEY_PAGEDOWN 109 -#define KEY_INSERT 110 -#define KEY_DELETE 111 -#define KEY_MACRO 112 -#define KEY_MUTE 113 -#define KEY_VOLUMEDOWN 114 -#define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ -#define KEY_KPEQUAL 117 -#define KEY_KPPLUSMINUS 118 -#define KEY_PAUSE 119 -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ - -#define KEY_KPCOMMA 121 -#define KEY_HANGEUL 122 -#define KEY_HANGUEL KEY_HANGEUL -#define KEY_HANJA 123 -#define KEY_YEN 124 -#define KEY_LEFTMETA 125 -#define KEY_RIGHTMETA 126 -#define KEY_COMPOSE 127 - -#define KEY_STOP 128 /* AC Stop */ -#define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ -#define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ -#define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ -#define KEY_SENDFILE 145 -#define KEY_DELETEFILE 146 -#define KEY_XFER 147 -#define KEY_PROG1 148 -#define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ -#define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE -#define KEY_DIRECTION 153 -#define KEY_CYCLEWINDOWS 154 -#define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ -#define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ -#define KEY_CLOSECD 160 -#define KEY_EJECTCD 161 -#define KEY_EJECTCLOSECD 162 -#define KEY_NEXTSONG 163 -#define KEY_PLAYPAUSE 164 -#define KEY_PREVIOUSSONG 165 -#define KEY_STOPCD 166 -#define KEY_RECORD 167 -#define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ -#define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ -#define KEY_MOVE 175 -#define KEY_EDIT 176 -#define KEY_SCROLLUP 177 -#define KEY_SCROLLDOWN 178 -#define KEY_KPLEFTPAREN 179 -#define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ - -#define KEY_F13 183 -#define KEY_F14 184 -#define KEY_F15 185 -#define KEY_F16 186 -#define KEY_F17 187 -#define KEY_F18 188 -#define KEY_F19 189 -#define KEY_F20 190 -#define KEY_F21 191 -#define KEY_F22 192 -#define KEY_F23 193 -#define KEY_F24 194 - -#define KEY_PLAYCD 200 -#define KEY_PAUSECD 201 -#define KEY_PROG3 202 -#define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ -#define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ -#define KEY_PLAY 207 -#define KEY_FASTFORWARD 208 -#define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ -#define KEY_HP 211 -#define KEY_CAMERA 212 -#define KEY_SOUND 213 -#define KEY_QUESTION 214 -#define KEY_EMAIL 215 -#define KEY_CHAT 216 -#define KEY_SEARCH 217 -#define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ -#define KEY_SPORT 220 -#define KEY_SHOP 221 -#define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ -#define KEY_BRIGHTNESSDOWN 224 -#define KEY_BRIGHTNESSUP 225 -#define KEY_MEDIA 226 - -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video - outputs (Monitor/LCD/TV-out/etc) */ -#define KEY_KBDILLUMTOGGLE 228 -#define KEY_KBDILLUMDOWN 229 -#define KEY_KBDILLUMUP 230 - -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ -#define KEY_DOCUMENTS 235 - -#define KEY_BATTERY 236 - -#define KEY_BLUETOOTH 237 -#define KEY_WLAN 238 -#define KEY_UWB 239 - -#define KEY_UNKNOWN 240 - -#define KEY_VIDEO_NEXT 241 /* drive next video source */ -#define KEY_VIDEO_PREV 242 /* drive previous video source */ -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ -#define KEY_DISPLAY_OFF 245 /* display device to off state */ - -#define KEY_WIMAX 246 -#define KEY_RFKILL 247 /* Key that controls all radios */ - -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ - -/* Code 255 is reserved for special needs of AT keyboard driver */ - -#define BTN_MISC 0x100 -#define BTN_0 0x100 -#define BTN_1 0x101 -#define BTN_2 0x102 -#define BTN_3 0x103 -#define BTN_4 0x104 -#define BTN_5 0x105 -#define BTN_6 0x106 -#define BTN_7 0x107 -#define BTN_8 0x108 -#define BTN_9 0x109 - -#define BTN_MOUSE 0x110 -#define BTN_LEFT 0x110 -#define BTN_RIGHT 0x111 -#define BTN_MIDDLE 0x112 -#define BTN_SIDE 0x113 -#define BTN_EXTRA 0x114 -#define BTN_FORWARD 0x115 -#define BTN_BACK 0x116 -#define BTN_TASK 0x117 - -#define BTN_JOYSTICK 0x120 -#define BTN_TRIGGER 0x120 -#define BTN_THUMB 0x121 -#define BTN_THUMB2 0x122 -#define BTN_TOP 0x123 -#define BTN_TOP2 0x124 -#define BTN_PINKIE 0x125 -#define BTN_BASE 0x126 -#define BTN_BASE2 0x127 -#define BTN_BASE3 0x128 -#define BTN_BASE4 0x129 -#define BTN_BASE5 0x12a -#define BTN_BASE6 0x12b -#define BTN_DEAD 0x12f - -#define BTN_GAMEPAD 0x130 -#define BTN_A 0x130 -#define BTN_B 0x131 -#define BTN_C 0x132 -#define BTN_X 0x133 -#define BTN_Y 0x134 -#define BTN_Z 0x135 -#define BTN_TL 0x136 -#define BTN_TR 0x137 -#define BTN_TL2 0x138 -#define BTN_TR2 0x139 -#define BTN_SELECT 0x13a -#define BTN_START 0x13b -#define BTN_MODE 0x13c -#define BTN_THUMBL 0x13d -#define BTN_THUMBR 0x13e - -#define BTN_DIGI 0x140 -#define BTN_TOOL_PEN 0x140 -#define BTN_TOOL_RUBBER 0x141 -#define BTN_TOOL_BRUSH 0x142 -#define BTN_TOOL_PENCIL 0x143 -#define BTN_TOOL_AIRBRUSH 0x144 -#define BTN_TOOL_FINGER 0x145 -#define BTN_TOOL_MOUSE 0x146 -#define BTN_TOOL_LENS 0x147 -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ -#define BTN_TOUCH 0x14a -#define BTN_STYLUS 0x14b -#define BTN_STYLUS2 0x14c -#define BTN_TOOL_DOUBLETAP 0x14d -#define BTN_TOOL_TRIPLETAP 0x14e -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ - -#define BTN_WHEEL 0x150 -#define BTN_GEAR_DOWN 0x150 -#define BTN_GEAR_UP 0x151 - -#define KEY_OK 0x160 -#define KEY_SELECT 0x161 -#define KEY_GOTO 0x162 -#define KEY_CLEAR 0x163 -#define KEY_POWER2 0x164 -#define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ -#define KEY_TIME 0x167 -#define KEY_VENDOR 0x168 -#define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ -#define KEY_CHANNEL 0x16b -#define KEY_FAVORITES 0x16c -#define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ -#define KEY_MHP 0x16f -#define KEY_LANGUAGE 0x170 -#define KEY_TITLE 0x171 -#define KEY_SUBTITLE 0x172 -#define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 -#define KEY_MODE 0x175 -#define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ -#define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ -#define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ -#define KEY_PLAYER 0x183 -#define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ -#define KEY_AUX 0x186 -#define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 /* AL Audio Browser */ -#define KEY_VIDEO 0x189 /* AL Movie Browser */ -#define KEY_DIRECTORY 0x18a -#define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ -#define KEY_CALENDAR 0x18d -#define KEY_RED 0x18e -#define KEY_GREEN 0x18f -#define KEY_YELLOW 0x190 -#define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ -#define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ -#define KEY_AB 0x196 -#define KEY_NEXT 0x197 -#define KEY_RESTART 0x198 -#define KEY_SLOW 0x199 -#define KEY_SHUFFLE 0x19a -#define KEY_BREAK 0x19b -#define KEY_PREVIOUS 0x19c -#define KEY_DIGITS 0x19d -#define KEY_TEEN 0x19e -#define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ -#define KEY_LOGOFF 0x1b1 /* AL Logoff */ - -#define KEY_DOLLAR 0x1b2 -#define KEY_EURO 0x1b3 - -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ -#define KEY_FRAMEFORWARD 0x1b5 -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ -#define KEY_IMAGES 0x1ba /* AL Image Browser */ - -#define KEY_DEL_EOL 0x1c0 -#define KEY_DEL_EOS 0x1c1 -#define KEY_INS_LINE 0x1c2 -#define KEY_DEL_LINE 0x1c3 - -#define KEY_FN 0x1d0 -#define KEY_FN_ESC 0x1d1 -#define KEY_FN_F1 0x1d2 -#define KEY_FN_F2 0x1d3 -#define KEY_FN_F3 0x1d4 -#define KEY_FN_F4 0x1d5 -#define KEY_FN_F5 0x1d6 -#define KEY_FN_F6 0x1d7 -#define KEY_FN_F7 0x1d8 -#define KEY_FN_F8 0x1d9 -#define KEY_FN_F9 0x1da -#define KEY_FN_F10 0x1db -#define KEY_FN_F11 0x1dc -#define KEY_FN_F12 0x1dd -#define KEY_FN_1 0x1de -#define KEY_FN_2 0x1df -#define KEY_FN_D 0x1e0 -#define KEY_FN_E 0x1e1 -#define KEY_FN_F 0x1e2 -#define KEY_FN_S 0x1e3 -#define KEY_FN_B 0x1e4 - -#define KEY_BRL_DOT1 0x1f1 -#define KEY_BRL_DOT2 0x1f2 -#define KEY_BRL_DOT3 0x1f3 -#define KEY_BRL_DOT4 0x1f4 -#define KEY_BRL_DOT5 0x1f5 -#define KEY_BRL_DOT6 0x1f6 -#define KEY_BRL_DOT7 0x1f7 -#define KEY_BRL_DOT8 0x1f8 -#define KEY_BRL_DOT9 0x1f9 -#define KEY_BRL_DOT10 0x1fa - -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ -#define KEY_NUMERIC_1 0x201 /* and other keypads */ -#define KEY_NUMERIC_2 0x202 -#define KEY_NUMERIC_3 0x203 -#define KEY_NUMERIC_4 0x204 -#define KEY_NUMERIC_5 0x205 -#define KEY_NUMERIC_6 0x206 -#define KEY_NUMERIC_7 0x207 -#define KEY_NUMERIC_8 0x208 -#define KEY_NUMERIC_9 0x209 -#define KEY_NUMERIC_STAR 0x20a -#define KEY_NUMERIC_POUND 0x20b - -#define KEY_CAMERA_FOCUS 0x210 -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ - -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ -#define KEY_TOUCHPAD_ON 0x213 -#define KEY_TOUCHPAD_OFF 0x214 - -#define KEY_CAMERA_ZOOMIN 0x215 -#define KEY_CAMERA_ZOOMOUT 0x216 -#define KEY_CAMERA_UP 0x217 -#define KEY_CAMERA_DOWN 0x218 -#define KEY_CAMERA_LEFT 0x219 -#define KEY_CAMERA_RIGHT 0x21a - -#define BTN_TRIGGER_HAPPY 0x2c0 -#define BTN_TRIGGER_HAPPY1 0x2c0 -#define BTN_TRIGGER_HAPPY2 0x2c1 -#define BTN_TRIGGER_HAPPY3 0x2c2 -#define BTN_TRIGGER_HAPPY4 0x2c3 -#define BTN_TRIGGER_HAPPY5 0x2c4 -#define BTN_TRIGGER_HAPPY6 0x2c5 -#define BTN_TRIGGER_HAPPY7 0x2c6 -#define BTN_TRIGGER_HAPPY8 0x2c7 -#define BTN_TRIGGER_HAPPY9 0x2c8 -#define BTN_TRIGGER_HAPPY10 0x2c9 -#define BTN_TRIGGER_HAPPY11 0x2ca -#define BTN_TRIGGER_HAPPY12 0x2cb -#define BTN_TRIGGER_HAPPY13 0x2cc -#define BTN_TRIGGER_HAPPY14 0x2cd -#define BTN_TRIGGER_HAPPY15 0x2ce -#define BTN_TRIGGER_HAPPY16 0x2cf -#define BTN_TRIGGER_HAPPY17 0x2d0 -#define BTN_TRIGGER_HAPPY18 0x2d1 -#define BTN_TRIGGER_HAPPY19 0x2d2 -#define BTN_TRIGGER_HAPPY20 0x2d3 -#define BTN_TRIGGER_HAPPY21 0x2d4 -#define BTN_TRIGGER_HAPPY22 0x2d5 -#define BTN_TRIGGER_HAPPY23 0x2d6 -#define BTN_TRIGGER_HAPPY24 0x2d7 -#define BTN_TRIGGER_HAPPY25 0x2d8 -#define BTN_TRIGGER_HAPPY26 0x2d9 -#define BTN_TRIGGER_HAPPY27 0x2da -#define BTN_TRIGGER_HAPPY28 0x2db -#define BTN_TRIGGER_HAPPY29 0x2dc -#define BTN_TRIGGER_HAPPY30 0x2dd -#define BTN_TRIGGER_HAPPY31 0x2de -#define BTN_TRIGGER_HAPPY32 0x2df -#define BTN_TRIGGER_HAPPY33 0x2e0 -#define BTN_TRIGGER_HAPPY34 0x2e1 -#define BTN_TRIGGER_HAPPY35 0x2e2 -#define BTN_TRIGGER_HAPPY36 0x2e3 -#define BTN_TRIGGER_HAPPY37 0x2e4 -#define BTN_TRIGGER_HAPPY38 0x2e5 -#define BTN_TRIGGER_HAPPY39 0x2e6 -#define BTN_TRIGGER_HAPPY40 0x2e7 - -/* We avoid low common keys in module aliases so they don't get huge. */ -#define KEY_MIN_INTERESTING KEY_MUTE -#define KEY_MAX 0x2ff -#define KEY_CNT (KEY_MAX+1) - -/* - * Relative axes - */ - -#define REL_X 0x00 -#define REL_Y 0x01 -#define REL_Z 0x02 -#define REL_RX 0x03 -#define REL_RY 0x04 -#define REL_RZ 0x05 -#define REL_HWHEEL 0x06 -#define REL_DIAL 0x07 -#define REL_WHEEL 0x08 -#define REL_MISC 0x09 -#define REL_MAX 0x0f -#define REL_CNT (REL_MAX+1) - -/* - * Absolute axes - */ - -#define ABS_X 0x00 -#define ABS_Y 0x01 -#define ABS_Z 0x02 -#define ABS_RX 0x03 -#define ABS_RY 0x04 -#define ABS_RZ 0x05 -#define ABS_THROTTLE 0x06 -#define ABS_RUDDER 0x07 -#define ABS_WHEEL 0x08 -#define ABS_GAS 0x09 -#define ABS_BRAKE 0x0a -#define ABS_HAT0X 0x10 -#define ABS_HAT0Y 0x11 -#define ABS_HAT1X 0x12 -#define ABS_HAT1Y 0x13 -#define ABS_HAT2X 0x14 -#define ABS_HAT2Y 0x15 -#define ABS_HAT3X 0x16 -#define ABS_HAT3Y 0x17 -#define ABS_PRESSURE 0x18 -#define ABS_DISTANCE 0x19 -#define ABS_TILT_X 0x1a -#define ABS_TILT_Y 0x1b -#define ABS_TOOL_WIDTH 0x1c - -#define ABS_VOLUME 0x20 - -#define ABS_MISC 0x28 - -#define ABS_MT_SLOT 0x2f /* MT slot being modified */ -#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ -#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ -#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ -#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ -#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ -#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ -#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ -#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ -#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ -#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ -#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ -#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ - -#ifdef __KERNEL__ +#include /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR #define ABS_MT_LAST ABS_MT_TOOL_Y -#endif - -#define ABS_MAX 0x3f -#define ABS_CNT (ABS_MAX+1) - -/* - * Switch events - */ - -#define SW_LID 0x00 /* set = lid shut */ -#define SW_TABLET_MODE 0x01 /* set = tablet mode */ -#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" - set = radio enabled */ -#define SW_RADIO SW_RFKILL_ALL /* deprecated */ -#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ -#define SW_DOCK 0x05 /* set = plugged into dock */ -#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ -#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ -#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ -#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ -#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ -#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ -#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ -#define SW_LINEIN_INSERT 0x0d /* set = inserted */ -#define SW_MAX 0x0f -#define SW_CNT (SW_MAX+1) - -/* - * Misc events - */ - -#define MSC_SERIAL 0x00 -#define MSC_PULSELED 0x01 -#define MSC_GESTURE 0x02 -#define MSC_RAW 0x03 -#define MSC_SCAN 0x04 -#define MSC_MAX 0x07 -#define MSC_CNT (MSC_MAX+1) - -/* - * LEDs - */ - -#define LED_NUML 0x00 -#define LED_CAPSL 0x01 -#define LED_SCROLLL 0x02 -#define LED_COMPOSE 0x03 -#define LED_KANA 0x04 -#define LED_SLEEP 0x05 -#define LED_SUSPEND 0x06 -#define LED_MUTE 0x07 -#define LED_MISC 0x08 -#define LED_MAIL 0x09 -#define LED_CHARGING 0x0a -#define LED_MAX 0x0f -#define LED_CNT (LED_MAX+1) - -/* - * Autorepeat values - */ - -#define REP_DELAY 0x00 -#define REP_PERIOD 0x01 -#define REP_MAX 0x01 -#define REP_CNT (REP_MAX+1) - -/* - * Sounds - */ - -#define SND_CLICK 0x00 -#define SND_BELL 0x01 -#define SND_TONE 0x02 -#define SND_MAX 0x07 -#define SND_CNT (SND_MAX+1) - -/* - * IDs. - */ - -#define ID_BUS 0 -#define ID_VENDOR 1 -#define ID_PRODUCT 2 -#define ID_VERSION 3 - -#define BUS_PCI 0x01 -#define BUS_ISAPNP 0x02 -#define BUS_USB 0x03 -#define BUS_HIL 0x04 -#define BUS_BLUETOOTH 0x05 -#define BUS_VIRTUAL 0x06 - -#define BUS_ISA 0x10 -#define BUS_I8042 0x11 -#define BUS_XTKBD 0x12 -#define BUS_RS232 0x13 -#define BUS_GAMEPORT 0x14 -#define BUS_PARPORT 0x15 -#define BUS_AMIGA 0x16 -#define BUS_ADB 0x17 -#define BUS_I2C 0x18 -#define BUS_HOST 0x19 -#define BUS_GSC 0x1A -#define BUS_ATARI 0x1B -#define BUS_SPI 0x1C - -/* - * MT_TOOL types - */ -#define MT_TOOL_FINGER 0 -#define MT_TOOL_PEN 1 -#define MT_TOOL_MAX 1 - -/* - * Values describing the status of a force-feedback effect - */ -#define FF_STATUS_STOPPED 0x00 -#define FF_STATUS_PLAYING 0x01 -#define FF_STATUS_MAX 0x01 - -/* - * Structures used in ioctls to upload effects to a device - * They are pieces of a bigger structure (called ff_effect) - */ - -/* - * All duration values are expressed in ms. Values above 32767 ms (0x7fff) - * should not be used and have unspecified results. - */ - -/** - * struct ff_replay - defines scheduling of the force-feedback effect - * @length: duration of the effect - * @delay: delay before effect should start playing - */ -struct ff_replay { - __u16 length; - __u16 delay; -}; - -/** - * struct ff_trigger - defines what triggers the force-feedback effect - * @button: number of the button triggering the effect - * @interval: controls how soon the effect can be re-triggered - */ -struct ff_trigger { - __u16 button; - __u16 interval; -}; - -/** - * struct ff_envelope - generic force-feedback effect envelope - * @attack_length: duration of the attack (ms) - * @attack_level: level at the beginning of the attack - * @fade_length: duration of fade (ms) - * @fade_level: level at the end of fade - * - * The @attack_level and @fade_level are absolute values; when applying - * envelope force-feedback core will convert to positive/negative - * value based on polarity of the default level of the effect. - * Valid range for the attack and fade levels is 0x0000 - 0x7fff - */ -struct ff_envelope { - __u16 attack_length; - __u16 attack_level; - __u16 fade_length; - __u16 fade_level; -}; - -/** - * struct ff_constant_effect - defines parameters of a constant force-feedback effect - * @level: strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_constant_effect { - __s16 level; - struct ff_envelope envelope; -}; - -/** - * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect - * @start_level: beginning strength of the effect; may be negative - * @end_level: final strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_ramp_effect { - __s16 start_level; - __s16 end_level; - struct ff_envelope envelope; -}; - -/** - * struct ff_condition_effect - defines a spring or friction force-feedback effect - * @right_saturation: maximum level when joystick moved all way to the right - * @left_saturation: same for the left side - * @right_coeff: controls how fast the force grows when the joystick moves - * to the right - * @left_coeff: same for the left side - * @deadband: size of the dead zone, where no force is produced - * @center: position of the dead zone - */ -struct ff_condition_effect { - __u16 right_saturation; - __u16 left_saturation; - - __s16 right_coeff; - __s16 left_coeff; - - __u16 deadband; - __s16 center; -}; - -/** - * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect - * @waveform: kind of the effect (wave) - * @period: period of the wave (ms) - * @magnitude: peak value - * @offset: mean value of the wave (roughly) - * @phase: 'horizontal' shift - * @envelope: envelope data - * @custom_len: number of samples (FF_CUSTOM only) - * @custom_data: buffer of samples (FF_CUSTOM only) - * - * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, - * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined - * for the time being as no driver supports it yet. - * - * Note: the data pointed by custom_data is copied by the driver. - * You can therefore dispose of the memory after the upload/update. - */ -struct ff_periodic_effect { - __u16 waveform; - __u16 period; - __s16 magnitude; - __s16 offset; - __u16 phase; - - struct ff_envelope envelope; - - __u32 custom_len; - __s16 __user *custom_data; -}; - -/** - * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect - * @strong_magnitude: magnitude of the heavy motor - * @weak_magnitude: magnitude of the light one - * - * Some rumble pads have two motors of different weight. Strong_magnitude - * represents the magnitude of the vibration generated by the heavy one. - */ -struct ff_rumble_effect { - __u16 strong_magnitude; - __u16 weak_magnitude; -}; - -/** - * struct ff_effect - defines force feedback effect - * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, - * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) - * @id: an unique id assigned to an effect - * @direction: direction of the effect - * @trigger: trigger conditions (struct ff_trigger) - * @replay: scheduling of the effect (struct ff_replay) - * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, - * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further - * defining effect parameters - * - * This structure is sent through ioctl from the application to the driver. - * To create a new effect application should set its @id to -1; the kernel - * will return assigned @id which can later be used to update or delete - * this effect. - * - * Direction of the effect is encoded as follows: - * 0 deg -> 0x0000 (down) - * 90 deg -> 0x4000 (left) - * 180 deg -> 0x8000 (up) - * 270 deg -> 0xC000 (right) - */ -struct ff_effect { - __u16 type; - __s16 id; - __u16 direction; - struct ff_trigger trigger; - struct ff_replay replay; - - union { - struct ff_constant_effect constant; - struct ff_ramp_effect ramp; - struct ff_periodic_effect periodic; - struct ff_condition_effect condition[2]; /* One for each axis */ - struct ff_rumble_effect rumble; - } u; -}; - -/* - * Force feedback effect types - */ - -#define FF_RUMBLE 0x50 -#define FF_PERIODIC 0x51 -#define FF_CONSTANT 0x52 -#define FF_SPRING 0x53 -#define FF_FRICTION 0x54 -#define FF_DAMPER 0x55 -#define FF_INERTIA 0x56 -#define FF_RAMP 0x57 - -#define FF_EFFECT_MIN FF_RUMBLE -#define FF_EFFECT_MAX FF_RAMP - -/* - * Force feedback periodic effect types - */ - -#define FF_SQUARE 0x58 -#define FF_TRIANGLE 0x59 -#define FF_SINE 0x5a -#define FF_SAW_UP 0x5b -#define FF_SAW_DOWN 0x5c -#define FF_CUSTOM 0x5d - -#define FF_WAVEFORM_MIN FF_SQUARE -#define FF_WAVEFORM_MAX FF_CUSTOM - -/* - * Set ff device properties - */ - -#define FF_GAIN 0x60 -#define FF_AUTOCENTER 0x61 - -#define FF_MAX 0x7f -#define FF_CNT (FF_MAX+1) - -#ifdef __KERNEL__ /* * In-kernel definitions. @@ -1668,4 +524,3 @@ int input_ff_create_memless(struct input_dev *dev, void *data, int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); #endif -#endif diff --git a/include/linux/ioctl.h b/include/linux/ioctl.h deleted file mode 100644 index aa91eb3951ef..000000000000 --- a/include/linux/ioctl.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _LINUX_IOCTL_H -#define _LINUX_IOCTL_H - -#include - -#endif /* _LINUX_IOCTL_H */ - diff --git a/include/linux/ip.h b/include/linux/ip.h index bd0a2a8631c6..58b82a22a52b 100644 --- a/include/linux/ip.h +++ b/include/linux/ip.h @@ -16,96 +16,9 @@ */ #ifndef _LINUX_IP_H #define _LINUX_IP_H -#include -#include -#define IPTOS_TOS_MASK 0x1E -#define IPTOS_TOS(tos) ((tos)&IPTOS_TOS_MASK) -#define IPTOS_LOWDELAY 0x10 -#define IPTOS_THROUGHPUT 0x08 -#define IPTOS_RELIABILITY 0x04 -#define IPTOS_MINCOST 0x02 - -#define IPTOS_PREC_MASK 0xE0 -#define IPTOS_PREC(tos) ((tos)&IPTOS_PREC_MASK) -#define IPTOS_PREC_NETCONTROL 0xe0 -#define IPTOS_PREC_INTERNETCONTROL 0xc0 -#define IPTOS_PREC_CRITIC_ECP 0xa0 -#define IPTOS_PREC_FLASHOVERRIDE 0x80 -#define IPTOS_PREC_FLASH 0x60 -#define IPTOS_PREC_IMMEDIATE 0x40 -#define IPTOS_PREC_PRIORITY 0x20 -#define IPTOS_PREC_ROUTINE 0x00 - - -/* IP options */ -#define IPOPT_COPY 0x80 -#define IPOPT_CLASS_MASK 0x60 -#define IPOPT_NUMBER_MASK 0x1f - -#define IPOPT_COPIED(o) ((o)&IPOPT_COPY) -#define IPOPT_CLASS(o) ((o)&IPOPT_CLASS_MASK) -#define IPOPT_NUMBER(o) ((o)&IPOPT_NUMBER_MASK) - -#define IPOPT_CONTROL 0x00 -#define IPOPT_RESERVED1 0x20 -#define IPOPT_MEASUREMENT 0x40 -#define IPOPT_RESERVED2 0x60 - -#define IPOPT_END (0 |IPOPT_CONTROL) -#define IPOPT_NOOP (1 |IPOPT_CONTROL) -#define IPOPT_SEC (2 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_LSRR (3 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_TIMESTAMP (4 |IPOPT_MEASUREMENT) -#define IPOPT_CIPSO (6 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_RR (7 |IPOPT_CONTROL) -#define IPOPT_SID (8 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_SSRR (9 |IPOPT_CONTROL|IPOPT_COPY) -#define IPOPT_RA (20|IPOPT_CONTROL|IPOPT_COPY) - -#define IPVERSION 4 -#define MAXTTL 255 -#define IPDEFTTL 64 - -#define IPOPT_OPTVAL 0 -#define IPOPT_OLEN 1 -#define IPOPT_OFFSET 2 -#define IPOPT_MINOFF 4 -#define MAX_IPOPTLEN 40 -#define IPOPT_NOP IPOPT_NOOP -#define IPOPT_EOL IPOPT_END -#define IPOPT_TS IPOPT_TIMESTAMP - -#define IPOPT_TS_TSONLY 0 /* timestamps only */ -#define IPOPT_TS_TSANDADDR 1 /* timestamps and addresses */ -#define IPOPT_TS_PRESPEC 3 /* specified modules only */ - -#define IPV4_BEET_PHMAXLEN 8 - -struct iphdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ihl:4, - version:4; -#elif defined (__BIG_ENDIAN_BITFIELD) - __u8 version:4, - ihl:4; -#else -#error "Please fix " -#endif - __u8 tos; - __be16 tot_len; - __be16 id; - __be16 frag_off; - __u8 ttl; - __u8 protocol; - __sum16 check; - __be32 saddr; - __be32 daddr; - /*The options start here. */ -}; - -#ifdef __KERNEL__ #include +#include static inline struct iphdr *ip_hdr(const struct sk_buff *skb) { @@ -116,34 +29,4 @@ static inline struct iphdr *ipip_hdr(const struct sk_buff *skb) { return (struct iphdr *)skb_transport_header(skb); } -#endif - -struct ip_auth_hdr { - __u8 nexthdr; - __u8 hdrlen; /* This one is measured in 32 bit units! */ - __be16 reserved; - __be32 spi; - __be32 seq_no; /* Sequence number */ - __u8 auth_data[0]; /* Variable len but >=4. Mind the 64 bit alignment! */ -}; - -struct ip_esp_hdr { - __be32 spi; - __be32 seq_no; /* Sequence number */ - __u8 enc_data[0]; /* Variable len but >=8. Mind the 64 bit alignment! */ -}; - -struct ip_comp_hdr { - __u8 nexthdr; - __u8 flags; - __be16 cpi; -}; - -struct ip_beet_phdr { - __u8 nexthdr; - __u8 hdrlen; - __u8 padlen; - __u8 reserved; -}; - #endif /* _LINUX_IP_H */ diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h deleted file mode 100644 index 48af63c9a48d..000000000000 --- a/include/linux/ip6_tunnel.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _IP6_TUNNEL_H -#define _IP6_TUNNEL_H - -#include - -#define IPV6_TLV_TNL_ENCAP_LIMIT 4 -#define IPV6_DEFAULT_TNL_ENCAP_LIMIT 4 - -/* don't add encapsulation limit if one isn't present in inner packet */ -#define IP6_TNL_F_IGN_ENCAP_LIMIT 0x1 -/* copy the traffic class field from the inner packet */ -#define IP6_TNL_F_USE_ORIG_TCLASS 0x2 -/* copy the flowlabel from the inner packet */ -#define IP6_TNL_F_USE_ORIG_FLOWLABEL 0x4 -/* being used for Mobile IPv6 */ -#define IP6_TNL_F_MIP6_DEV 0x8 -/* copy DSCP from the outer packet */ -#define IP6_TNL_F_RCV_DSCP_COPY 0x10 -/* copy fwmark from inner packet */ -#define IP6_TNL_F_USE_ORIG_FWMARK 0x20 - -struct ip6_tnl_parm { - char name[IFNAMSIZ]; /* name of tunnel device */ - int link; /* ifindex of underlying L2 interface */ - __u8 proto; /* tunnel protocol */ - __u8 encap_limit; /* encapsulation limit for tunnel */ - __u8 hop_limit; /* hop limit for tunnel */ - __be32 flowinfo; /* traffic class and flowlabel for tunnel */ - __u32 flags; /* tunnel flags */ - struct in6_addr laddr; /* local tunnel end-point address */ - struct in6_addr raddr; /* remote tunnel end-point address */ -}; - -struct ip6_tnl_parm2 { - char name[IFNAMSIZ]; /* name of tunnel device */ - int link; /* ifindex of underlying L2 interface */ - __u8 proto; /* tunnel protocol */ - __u8 encap_limit; /* encapsulation limit for tunnel */ - __u8 hop_limit; /* hop limit for tunnel */ - __be32 flowinfo; /* traffic class and flowlabel for tunnel */ - __u32 flags; /* tunnel flags */ - struct in6_addr laddr; /* local tunnel end-point address */ - struct in6_addr raddr; /* remote tunnel end-point address */ - - __be16 i_flags; - __be16 o_flags; - __be32 i_key; - __be32 o_key; -}; - -#endif diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h deleted file mode 100644 index 8a2d438dc499..000000000000 --- a/include/linux/ip_vs.h +++ /dev/null @@ -1,434 +0,0 @@ -/* - * IP Virtual Server - * data structure and functionality definitions - */ - -#ifndef _IP_VS_H -#define _IP_VS_H - -#include /* For __beXX types in userland */ - -#define IP_VS_VERSION_CODE 0x010201 -#define NVERSION(version) \ - (version >> 16) & 0xFF, \ - (version >> 8) & 0xFF, \ - version & 0xFF - -/* - * Virtual Service Flags - */ -#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ -#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ -#define IP_VS_SVC_F_ONEPACKET 0x0004 /* one-packet scheduling */ - -/* - * Destination Server Flags - */ -#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */ -#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */ - -/* - * IPVS sync daemon states - */ -#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */ -#define IP_VS_STATE_MASTER 0x0001 /* started as master */ -#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */ - -/* - * IPVS socket options - */ -#define IP_VS_BASE_CTL (64+1024+64) /* base */ - -#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */ -#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1) -#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2) -#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3) -#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4) -#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5) -#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6) -#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7) -#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8) -#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9) -#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) -#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11) -#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12) -#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13) -#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14) -#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15) -#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO - -#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL -#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1) -#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2) -#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3) -#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4) -#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */ -#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6) -#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7) -#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON - - -/* - * IPVS Connection Flags - * Only flags 0..15 are sent to backup server - */ -#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */ -#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */ -#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */ -#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */ -#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */ -#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */ -#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */ -#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */ -#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */ -#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */ -#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */ -#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */ -#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */ -#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */ -#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */ -#define IP_VS_CONN_F_ONE_PACKET 0x2000 /* forward only one packet */ - -/* Initial bits allowed in backup server */ -#define IP_VS_CONN_F_BACKUP_MASK (IP_VS_CONN_F_FWD_MASK | \ - IP_VS_CONN_F_NOOUTPUT | \ - IP_VS_CONN_F_INACTIVE | \ - IP_VS_CONN_F_SEQ_MASK | \ - IP_VS_CONN_F_NO_CPORT | \ - IP_VS_CONN_F_TEMPLATE \ - ) - -/* Bits allowed to update in backup server */ -#define IP_VS_CONN_F_BACKUP_UPD_MASK (IP_VS_CONN_F_INACTIVE | \ - IP_VS_CONN_F_SEQ_MASK) - -/* Flags that are not sent to backup server start from bit 16 */ -#define IP_VS_CONN_F_NFCT (1 << 16) /* use netfilter conntrack */ - -/* Connection flags from destination that can be changed by user space */ -#define IP_VS_CONN_F_DEST_MASK (IP_VS_CONN_F_FWD_MASK | \ - IP_VS_CONN_F_ONE_PACKET | \ - IP_VS_CONN_F_NFCT | \ - 0) - -#define IP_VS_SCHEDNAME_MAXLEN 16 -#define IP_VS_PENAME_MAXLEN 16 -#define IP_VS_IFNAME_MAXLEN 16 - -#define IP_VS_PEDATA_MAXLEN 255 - -/* - * The struct ip_vs_service_user and struct ip_vs_dest_user are - * used to set IPVS rules through setsockopt. - */ -struct ip_vs_service_user { - /* virtual service addresses */ - __u16 protocol; - __be32 addr; /* virtual ip address */ - __be16 port; - __u32 fwmark; /* firwall mark of service */ - - /* virtual service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned int flags; /* virtual service flags */ - unsigned int timeout; /* persistent timeout in sec */ - __be32 netmask; /* persistent netmask */ -}; - - -struct ip_vs_dest_user { - /* destination server address */ - __be32 addr; - __be16 port; - - /* real server options */ - unsigned int conn_flags; /* connection flags */ - int weight; /* destination weight */ - - /* thresholds for active connections */ - __u32 u_threshold; /* upper threshold */ - __u32 l_threshold; /* lower threshold */ -}; - - -/* - * IPVS statistics object (for user space) - */ -struct ip_vs_stats_user { - __u32 conns; /* connections scheduled */ - __u32 inpkts; /* incoming packets */ - __u32 outpkts; /* outgoing packets */ - __u64 inbytes; /* incoming bytes */ - __u64 outbytes; /* outgoing bytes */ - - __u32 cps; /* current connection rate */ - __u32 inpps; /* current in packet rate */ - __u32 outpps; /* current out packet rate */ - __u32 inbps; /* current in byte rate */ - __u32 outbps; /* current out byte rate */ -}; - - -/* The argument to IP_VS_SO_GET_INFO */ -struct ip_vs_getinfo { - /* version number */ - unsigned int version; - - /* size of connection hash table */ - unsigned int size; - - /* number of virtual services */ - unsigned int num_services; -}; - - -/* The argument to IP_VS_SO_GET_SERVICE */ -struct ip_vs_service_entry { - /* which service: user fills in these */ - __u16 protocol; - __be32 addr; /* virtual address */ - __be16 port; - __u32 fwmark; /* firwall mark of service */ - - /* service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned int flags; /* virtual service flags */ - unsigned int timeout; /* persistent timeout */ - __be32 netmask; /* persistent netmask */ - - /* number of real servers */ - unsigned int num_dests; - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -struct ip_vs_dest_entry { - __be32 addr; /* destination address */ - __be16 port; - unsigned int conn_flags; /* connection flags */ - int weight; /* destination weight */ - - __u32 u_threshold; /* upper threshold */ - __u32 l_threshold; /* lower threshold */ - - __u32 activeconns; /* active connections */ - __u32 inactconns; /* inactive connections */ - __u32 persistconns; /* persistent connections */ - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -/* The argument to IP_VS_SO_GET_DESTS */ -struct ip_vs_get_dests { - /* which service: user fills in these */ - __u16 protocol; - __be32 addr; /* virtual address */ - __be16 port; - __u32 fwmark; /* firwall mark of service */ - - /* number of real servers */ - unsigned int num_dests; - - /* the real servers */ - struct ip_vs_dest_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_SERVICES */ -struct ip_vs_get_services { - /* number of virtual services */ - unsigned int num_services; - - /* service table */ - struct ip_vs_service_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_TIMEOUT */ -struct ip_vs_timeout_user { - int tcp_timeout; - int tcp_fin_timeout; - int udp_timeout; -}; - - -/* The argument to IP_VS_SO_GET_DAEMON */ -struct ip_vs_daemon_user { - /* sync daemon state (master/backup) */ - int state; - - /* multicast interface name */ - char mcast_ifn[IP_VS_IFNAME_MAXLEN]; - - /* SyncID we belong to */ - int syncid; -}; - -/* - * - * IPVS Generic Netlink interface definitions - * - */ - -/* Generic Netlink family info */ - -#define IPVS_GENL_NAME "IPVS" -#define IPVS_GENL_VERSION 0x1 - -struct ip_vs_flags { - __be32 flags; - __be32 mask; -}; - -/* Generic Netlink command attributes */ -enum { - IPVS_CMD_UNSPEC = 0, - - IPVS_CMD_NEW_SERVICE, /* add service */ - IPVS_CMD_SET_SERVICE, /* modify service */ - IPVS_CMD_DEL_SERVICE, /* delete service */ - IPVS_CMD_GET_SERVICE, /* get service info */ - - IPVS_CMD_NEW_DEST, /* add destination */ - IPVS_CMD_SET_DEST, /* modify destination */ - IPVS_CMD_DEL_DEST, /* delete destination */ - IPVS_CMD_GET_DEST, /* get destination info */ - - IPVS_CMD_NEW_DAEMON, /* start sync daemon */ - IPVS_CMD_DEL_DAEMON, /* stop sync daemon */ - IPVS_CMD_GET_DAEMON, /* get sync daemon status */ - - IPVS_CMD_SET_CONFIG, /* set config settings */ - IPVS_CMD_GET_CONFIG, /* get config settings */ - - IPVS_CMD_SET_INFO, /* only used in GET_INFO reply */ - IPVS_CMD_GET_INFO, /* get general IPVS info */ - - IPVS_CMD_ZERO, /* zero all counters and stats */ - IPVS_CMD_FLUSH, /* flush services and dests */ - - __IPVS_CMD_MAX, -}; - -#define IPVS_CMD_MAX (__IPVS_CMD_MAX - 1) - -/* Attributes used in the first level of commands */ -enum { - IPVS_CMD_ATTR_UNSPEC = 0, - IPVS_CMD_ATTR_SERVICE, /* nested service attribute */ - IPVS_CMD_ATTR_DEST, /* nested destination attribute */ - IPVS_CMD_ATTR_DAEMON, /* nested sync daemon attribute */ - IPVS_CMD_ATTR_TIMEOUT_TCP, /* TCP connection timeout */ - IPVS_CMD_ATTR_TIMEOUT_TCP_FIN, /* TCP FIN wait timeout */ - IPVS_CMD_ATTR_TIMEOUT_UDP, /* UDP timeout */ - __IPVS_CMD_ATTR_MAX, -}; - -#define IPVS_CMD_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1) - -/* - * Attributes used to describe a service - * - * Used inside nested attribute IPVS_CMD_ATTR_SERVICE - */ -enum { - IPVS_SVC_ATTR_UNSPEC = 0, - IPVS_SVC_ATTR_AF, /* address family */ - IPVS_SVC_ATTR_PROTOCOL, /* virtual service protocol */ - IPVS_SVC_ATTR_ADDR, /* virtual service address */ - IPVS_SVC_ATTR_PORT, /* virtual service port */ - IPVS_SVC_ATTR_FWMARK, /* firewall mark of service */ - - IPVS_SVC_ATTR_SCHED_NAME, /* name of scheduler */ - IPVS_SVC_ATTR_FLAGS, /* virtual service flags */ - IPVS_SVC_ATTR_TIMEOUT, /* persistent timeout */ - IPVS_SVC_ATTR_NETMASK, /* persistent netmask */ - - IPVS_SVC_ATTR_STATS, /* nested attribute for service stats */ - - IPVS_SVC_ATTR_PE_NAME, /* name of ct retriever */ - - __IPVS_SVC_ATTR_MAX, -}; - -#define IPVS_SVC_ATTR_MAX (__IPVS_SVC_ATTR_MAX - 1) - -/* - * Attributes used to describe a destination (real server) - * - * Used inside nested attribute IPVS_CMD_ATTR_DEST - */ -enum { - IPVS_DEST_ATTR_UNSPEC = 0, - IPVS_DEST_ATTR_ADDR, /* real server address */ - IPVS_DEST_ATTR_PORT, /* real server port */ - - IPVS_DEST_ATTR_FWD_METHOD, /* forwarding method */ - IPVS_DEST_ATTR_WEIGHT, /* destination weight */ - - IPVS_DEST_ATTR_U_THRESH, /* upper threshold */ - IPVS_DEST_ATTR_L_THRESH, /* lower threshold */ - - IPVS_DEST_ATTR_ACTIVE_CONNS, /* active connections */ - IPVS_DEST_ATTR_INACT_CONNS, /* inactive connections */ - IPVS_DEST_ATTR_PERSIST_CONNS, /* persistent connections */ - - IPVS_DEST_ATTR_STATS, /* nested attribute for dest stats */ - __IPVS_DEST_ATTR_MAX, -}; - -#define IPVS_DEST_ATTR_MAX (__IPVS_DEST_ATTR_MAX - 1) - -/* - * Attributes describing a sync daemon - * - * Used inside nested attribute IPVS_CMD_ATTR_DAEMON - */ -enum { - IPVS_DAEMON_ATTR_UNSPEC = 0, - IPVS_DAEMON_ATTR_STATE, /* sync daemon state (master/backup) */ - IPVS_DAEMON_ATTR_MCAST_IFN, /* multicast interface name */ - IPVS_DAEMON_ATTR_SYNC_ID, /* SyncID we belong to */ - __IPVS_DAEMON_ATTR_MAX, -}; - -#define IPVS_DAEMON_ATTR_MAX (__IPVS_DAEMON_ATTR_MAX - 1) - -/* - * Attributes used to describe service or destination entry statistics - * - * Used inside nested attributes IPVS_SVC_ATTR_STATS and IPVS_DEST_ATTR_STATS - */ -enum { - IPVS_STATS_ATTR_UNSPEC = 0, - IPVS_STATS_ATTR_CONNS, /* connections scheduled */ - IPVS_STATS_ATTR_INPKTS, /* incoming packets */ - IPVS_STATS_ATTR_OUTPKTS, /* outgoing packets */ - IPVS_STATS_ATTR_INBYTES, /* incoming bytes */ - IPVS_STATS_ATTR_OUTBYTES, /* outgoing bytes */ - - IPVS_STATS_ATTR_CPS, /* current connection rate */ - IPVS_STATS_ATTR_INPPS, /* current in packet rate */ - IPVS_STATS_ATTR_OUTPPS, /* current out packet rate */ - IPVS_STATS_ATTR_INBPS, /* current in byte rate */ - IPVS_STATS_ATTR_OUTBPS, /* current out byte rate */ - __IPVS_STATS_ATTR_MAX, -}; - -#define IPVS_STATS_ATTR_MAX (__IPVS_STATS_ATTR_MAX - 1) - -/* Attributes used in response to IPVS_CMD_GET_INFO command */ -enum { - IPVS_INFO_ATTR_UNSPEC = 0, - IPVS_INFO_ATTR_VERSION, /* IPVS version number */ - IPVS_INFO_ATTR_CONN_TAB_SIZE, /* size of connection hash table */ - __IPVS_INFO_ATTR_MAX, -}; - -#define IPVS_INFO_ATTR_MAX (__IPVS_INFO_ATTR_MAX - 1) - -#endif /* _IP_VS_H */ diff --git a/include/linux/ipc.h b/include/linux/ipc.h index ca833fdc3138..8d861b2651f7 100644 --- a/include/linux/ipc.h +++ b/include/linux/ipc.h @@ -1,85 +1,9 @@ #ifndef _LINUX_IPC_H #define _LINUX_IPC_H -#include - -#define IPC_PRIVATE ((__kernel_key_t) 0) - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct ipc_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned short seq; -}; - -/* Include the definition of ipc64_perm */ -#include - -/* resource get request flags */ -#define IPC_CREAT 00001000 /* create if key is nonexistent */ -#define IPC_EXCL 00002000 /* fail if key exists */ -#define IPC_NOWAIT 00004000 /* return error on wait */ - -/* these fields are used by the DIPC package so the kernel as standard - should avoid using them if possible */ - -#define IPC_DIPC 00010000 /* make it distributed */ -#define IPC_OWN 00020000 /* this machine is the DIPC owner */ - -/* - * Control commands used with semctl, msgctl and shmctl - * see also specific commands in sem.h, msg.h and shm.h - */ -#define IPC_RMID 0 /* remove resource */ -#define IPC_SET 1 /* set ipc_perm options */ -#define IPC_STAT 2 /* get ipc_perm options */ -#define IPC_INFO 3 /* see ipcs */ - -/* - * Version flags for semctl, msgctl, and shmctl commands - * These are passed as bitflags or-ed with the actual command - */ -#define IPC_OLD 0 /* Old version (no 32-bit UID support on many - architectures) */ -#define IPC_64 0x0100 /* New version (support 32-bit UIDs, bigger - message sizes, etc. */ - -/* - * These are used to wrap system calls. - * - * See architecture code for ugly details.. - */ -struct ipc_kludge { - struct msgbuf __user *msgp; - long msgtyp; -}; - -#define SEMOP 1 -#define SEMGET 2 -#define SEMCTL 3 -#define SEMTIMEDOP 4 -#define MSGSND 11 -#define MSGRCV 12 -#define MSGGET 13 -#define MSGCTL 14 -#define SHMAT 21 -#define SHMDT 22 -#define SHMGET 23 -#define SHMCTL 24 - -/* Used by the DIPC package, try and avoid reusing it */ -#define DIPC 25 - -#define IPCCALL(version,op) ((version)<<16 | (op)) - -#ifdef __KERNEL__ #include #include +#include #define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */ @@ -99,6 +23,4 @@ struct kern_ipc_perm void *security; }; -#endif /* __KERNEL__ */ - #endif /* _LINUX_IPC_H */ diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 48dcba9b2065..1487e7906bbd 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -30,191 +30,11 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef __LINUX_IPMI_H #define __LINUX_IPMI_H -#include -#include - -/* - * This file describes an interface to an IPMI driver. You have to - * have a fairly good understanding of IPMI to use this, so go read - * the specs first before actually trying to do anything. - * - * With that said, this driver provides a multi-user interface to the - * IPMI driver, and it allows multiple IPMI physical interfaces below - * the driver. The physical interfaces bind as a lower layer on the - * driver. They appear as interfaces to the application using this - * interface. - * - * Multi-user means that multiple applications may use the driver, - * send commands, receive responses, etc. The driver keeps track of - * commands the user sends and tracks the responses. The responses - * will go back to the application that send the command. If the - * response doesn't come back in time, the driver will return a - * timeout error response to the application. Asynchronous events - * from the BMC event queue will go to all users bound to the driver. - * The incoming event queue in the BMC will automatically be flushed - * if it becomes full and it is queried once a second to see if - * anything is in it. Incoming commands to the driver will get - * delivered as commands. - * - * This driver provides two main interfaces: one for in-kernel - * applications and another for userland applications. The - * capabilities are basically the same for both interface, although - * the interfaces are somewhat different. The stuff in the - * #ifdef __KERNEL__ below is the in-kernel interface. The userland - * interface is defined later in the file. */ - - - -/* - * This is an overlay for all the address types, so it's easy to - * determine the actual address type. This is kind of like addresses - * work for sockets. - */ -#define IPMI_MAX_ADDR_SIZE 32 -struct ipmi_addr { - /* Try to take these from the "Channel Medium Type" table - in section 6.5 of the IPMI 1.5 manual. */ - int addr_type; - short channel; - char data[IPMI_MAX_ADDR_SIZE]; -}; - -/* - * When the address is not used, the type will be set to this value. - * The channel is the BMC's channel number for the channel (usually - * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. - */ -#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c -struct ipmi_system_interface_addr { - int addr_type; - short channel; - unsigned char lun; -}; - -/* An IPMB Address. */ -#define IPMI_IPMB_ADDR_TYPE 0x01 -/* Used for broadcast get device id as described in section 17.9 of the - IPMI 1.5 manual. */ -#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 -struct ipmi_ipmb_addr { - int addr_type; - short channel; - unsigned char slave_addr; - unsigned char lun; -}; - -/* - * A LAN Address. This is an address to/from a LAN interface bridged - * by the BMC, not an address actually out on the LAN. - * - * A conscious decision was made here to deviate slightly from the IPMI - * spec. We do not use rqSWID and rsSWID like it shows in the - * message. Instead, we use remote_SWID and local_SWID. This means - * that any message (a request or response) from another device will - * always have exactly the same address. If you didn't do this, - * requests and responses from the same device would have different - * addresses, and that's not too cool. - * - * In this address, the remote_SWID is always the SWID the remote - * message came from, or the SWID we are sending the message to. - * local_SWID is always our SWID. Note that having our SWID in the - * message is a little weird, but this is required. - */ -#define IPMI_LAN_ADDR_TYPE 0x04 -struct ipmi_lan_addr { - int addr_type; - short channel; - unsigned char privilege; - unsigned char session_handle; - unsigned char remote_SWID; - unsigned char local_SWID; - unsigned char lun; -}; - - -/* - * Channel for talking directly with the BMC. When using this - * channel, This is for the system interface address type only. FIXME - * - is this right, or should we use -1? - */ -#define IPMI_BMC_CHANNEL 0xf -#define IPMI_NUM_CHANNELS 0x10 - -/* - * Used to signify an "all channel" bitmask. This is more than the - * actual number of channels because this is used in userland and - * will cover us if the number of channels is extended. - */ -#define IPMI_CHAN_ALL (~0) - - -/* - * A raw IPMI message without any addressing. This covers both - * commands and responses. The completion code is always the first - * byte of data in the response (as the spec shows the messages laid - * out). - */ -struct ipmi_msg { - unsigned char netfn; - unsigned char cmd; - unsigned short data_len; - unsigned char __user *data; -}; - -struct kernel_ipmi_msg { - unsigned char netfn; - unsigned char cmd; - unsigned short data_len; - unsigned char *data; -}; - -/* - * Various defines that are useful for IPMI applications. - */ -#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 -#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 -#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff - +#include -/* - * Receive types for messages coming from the receive interface. This - * is used for the receive in-kernel interface and in the receive - * IOCTL. - * - * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but - * it allows you to get the message results when you send a response - * message. - */ -#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ -#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ -#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ -#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for - a sent response, giving any - error status for sending the - response. When you send a - response message, this will - be returned. */ -#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ - -/* Note that async events and received commands do not have a completion - code as the first byte of the incoming data, unlike a response. */ - - -/* - * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO - * setting is the default and means it will be set on certain - * commands. Hard setting it on and off will override automatic - * operation. - */ -#define IPMI_MAINTENANCE_MODE_AUTO 0 -#define IPMI_MAINTENANCE_MODE_OFF 1 -#define IPMI_MAINTENANCE_MODE_ON 2 - -#ifdef __KERNEL__ /* * The in-kernel interface. @@ -493,244 +313,4 @@ struct ipmi_smi_info { /* This is to get the private info of ipmi_smi_t */ extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data); -#endif /* __KERNEL__ */ - - -/* - * The userland interface - */ - -/* - * The userland interface for the IPMI driver is a standard character - * device, with each instance of an interface registered as a minor - * number under the major character device. - * - * The read and write calls do not work, to get messages in and out - * requires ioctl calls because of the complexity of the data. select - * and poll do work, so you can wait for input using the file - * descriptor, you just can use read to get it. - * - * In general, you send a command down to the interface and receive - * responses back. You can use the msgid value to correlate commands - * and responses, the driver will take care of figuring out which - * incoming messages are for which command and find the proper msgid - * value to report. You will only receive reponses for commands you - * send. Asynchronous events, however, go to all open users, so you - * must be ready to handle these (or ignore them if you don't care). - * - * The address type depends upon the channel type. When talking - * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored - * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must - * supply a valid IPMB address with the addr_type set properly. - * - * When talking to normal channels, the driver takes care of the - * details of formatting and sending messages on that channel. You do - * not, for instance, have to format a send command, you just send - * whatever command you want to the channel, the driver will create - * the send command, automatically issue receive command and get even - * commands, and pass those up to the proper user. - */ - - -/* The magic IOCTL value for this interface. */ -#define IPMI_IOC_MAGIC 'i' - - -/* Messages sent to the interface are this format. */ -struct ipmi_req { - unsigned char __user *addr; /* Address to send the message to. */ - unsigned int addr_len; - - long msgid; /* The sequence number for the message. This - exact value will be reported back in the - response to this request if it is a command. - If it is a response, this will be used as - the sequence value for the response. */ - - struct ipmi_msg msg; -}; -/* - * Send a message to the interfaces. error values are: - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid, or the command - * was not allowed. - * - EMSGSIZE - The message to was too large. - * - ENOMEM - Buffers could not be allocated for the command. - */ -#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ - struct ipmi_req) - -/* Messages sent to the interface with timing parameters are this - format. */ -struct ipmi_req_settime { - struct ipmi_req req; - - /* See ipmi_request_settime() above for details on these - values. */ - int retries; - unsigned int retry_time_ms; -}; -/* - * Send a message to the interfaces with timing parameters. error values - * are: - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid, or the command - * was not allowed. - * - EMSGSIZE - The message to was too large. - * - ENOMEM - Buffers could not be allocated for the command. - */ -#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ - struct ipmi_req_settime) - -/* Messages received from the interface are this format. */ -struct ipmi_recv { - int recv_type; /* Is this a command, response or an - asyncronous event. */ - - unsigned char __user *addr; /* Address the message was from is put - here. The caller must supply the - memory. */ - unsigned int addr_len; /* The size of the address buffer. - The caller supplies the full buffer - length, this value is updated to - the actual message length when the - message is received. */ - - long msgid; /* The sequence number specified in the request - if this is a response. If this is a command, - this will be the sequence number from the - command. */ - - struct ipmi_msg msg; /* The data field must point to a buffer. - The data_size field must be set to the - size of the message buffer. The - caller supplies the full buffer - length, this value is updated to the - actual message length when the message - is received. */ -}; - -/* - * Receive a message. error values: - * - EAGAIN - no messages in the queue. - * - EFAULT - an address supplied was invalid. - * - EINVAL - The address supplied was not valid. - * - EMSGSIZE - The message to was too large to fit into the message buffer, - * the message will be left in the buffer. */ -#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ - struct ipmi_recv) - -/* - * Like RECEIVE_MSG, but if the message won't fit in the buffer, it - * will truncate the contents instead of leaving the data in the - * buffer. - */ -#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ - struct ipmi_recv) - -/* Register to get commands from other entities on this interface. */ -struct ipmi_cmdspec { - unsigned char netfn; - unsigned char cmd; -}; - -/* - * Register to receive a specific command. error values: - * - EFAULT - an address supplied was invalid. - * - EBUSY - The netfn/cmd supplied was already in use. - * - ENOMEM - could not allocate memory for the entry. - */ -#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ - struct ipmi_cmdspec) -/* - * Unregister a regsitered command. error values: - * - EFAULT - an address supplied was invalid. - * - ENOENT - The netfn/cmd was not found registered for this user. - */ -#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ - struct ipmi_cmdspec) - -/* - * Register to get commands from other entities on specific channels. - * This way, you can only listen on specific channels, or have messages - * from some channels go to one place and other channels to someplace - * else. The chans field is a bitmask, (1 << channel) for each channel. - * It may be IPMI_CHAN_ALL for all channels. - */ -struct ipmi_cmdspec_chans { - unsigned int netfn; - unsigned int cmd; - unsigned int chans; -}; - -/* - * Register to receive a specific command on specific channels. error values: - * - EFAULT - an address supplied was invalid. - * - EBUSY - One of the netfn/cmd/chans supplied was already in use. - * - ENOMEM - could not allocate memory for the entry. - */ -#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ - struct ipmi_cmdspec_chans) -/* - * Unregister some netfn/cmd/chans. error values: - * - EFAULT - an address supplied was invalid. - * - ENOENT - None of the netfn/cmd/chans were found registered for this user. - */ -#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ - struct ipmi_cmdspec_chans) - -/* - * Set whether this interface receives events. Note that the first - * user registered for events will get all pending events for the - * interface. error values: - * - EFAULT - an address supplied was invalid. - */ -#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) - -/* - * Set and get the slave address and LUN that we will use for our - * source messages. Note that this affects the interface, not just - * this user, so it will affect all users of this interface. This is - * so some initialization code can come in and do the OEM-specific - * things it takes to determine your address (if not the BMC) and set - * it for everyone else. You should probably leave the LUN alone. - */ -struct ipmi_channel_lun_address_set { - unsigned short channel; - unsigned char value; -}; -#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ - _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) -#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ - _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) -#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ - _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) -#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ - _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) -/* Legacy interfaces, these only set IPMB 0. */ -#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) -#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) -#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) -#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) - -/* - * Get/set the default timing values for an interface. You shouldn't - * generally mess with these. - */ -struct ipmi_timing_parms { - int retries; - unsigned int retry_time_ms; -}; -#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ - struct ipmi_timing_parms) -#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ - struct ipmi_timing_parms) - -/* - * Set the maintenance mode. See ipmi_set_maintenance_mode() above - * for a description of what this does. - */ -#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) -#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) - #endif /* __LINUX_IPMI_H */ diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h deleted file mode 100644 index df97e6e31e87..000000000000 --- a/include/linux/ipmi_msgdefs.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * ipmi_smi.h - * - * MontaVista IPMI system management interface - * - * Author: MontaVista Software, Inc. - * Corey Minyard - * source@mvista.com - * - * Copyright 2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __LINUX_IPMI_MSGDEFS_H -#define __LINUX_IPMI_MSGDEFS_H - -/* Various definitions for IPMI messages used by almost everything in - the IPMI stack. */ - -/* NetFNs and commands used inside the IPMI stack. */ - -#define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04 -#define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05 -#define IPMI_GET_EVENT_RECEIVER_CMD 0x01 - -#define IPMI_NETFN_APP_REQUEST 0x06 -#define IPMI_NETFN_APP_RESPONSE 0x07 -#define IPMI_GET_DEVICE_ID_CMD 0x01 -#define IPMI_COLD_RESET_CMD 0x02 -#define IPMI_WARM_RESET_CMD 0x03 -#define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 -#define IPMI_GET_DEVICE_GUID_CMD 0x08 -#define IPMI_GET_MSG_FLAGS_CMD 0x31 -#define IPMI_SEND_MSG_CMD 0x34 -#define IPMI_GET_MSG_CMD 0x33 -#define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e -#define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f -#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 -#define IPMI_GET_CHANNEL_INFO_CMD 0x42 - -/* Bit for BMC global enables. */ -#define IPMI_BMC_RCV_MSG_INTR 0x01 -#define IPMI_BMC_EVT_MSG_INTR 0x02 -#define IPMI_BMC_EVT_MSG_BUFF 0x04 -#define IPMI_BMC_SYS_LOG 0x08 - -#define IPMI_NETFN_STORAGE_REQUEST 0x0a -#define IPMI_NETFN_STORAGE_RESPONSE 0x0b -#define IPMI_ADD_SEL_ENTRY_CMD 0x44 - -#define IPMI_NETFN_FIRMWARE_REQUEST 0x08 -#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 - -/* The default slave address */ -#define IPMI_BMC_SLAVE_ADDR 0x20 - -/* The BT interface on high-end HP systems supports up to 255 bytes in - * one transfer. Its "virtual" BMC supports some commands that are longer - * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus - * some overhead; it's not worth the effort to dynamically size this based - * on the results of the "Get BT Capabilities" command. */ -#define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ - -#define IPMI_CC_NO_ERROR 0x00 -#define IPMI_NODE_BUSY_ERR 0xc0 -#define IPMI_INVALID_COMMAND_ERR 0xc1 -#define IPMI_TIMEOUT_ERR 0xc3 -#define IPMI_ERR_MSG_TRUNCATED 0xc6 -#define IPMI_REQ_LEN_INVALID_ERR 0xc7 -#define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 -#define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ -#define IPMI_LOST_ARBITRATION_ERR 0x81 -#define IPMI_BUS_ERR 0x82 -#define IPMI_NAK_ON_WRITE_ERR 0x83 -#define IPMI_ERR_UNSPECIFIED 0xff - -#define IPMI_CHANNEL_PROTOCOL_IPMB 1 -#define IPMI_CHANNEL_PROTOCOL_ICMB 2 -#define IPMI_CHANNEL_PROTOCOL_SMBUS 4 -#define IPMI_CHANNEL_PROTOCOL_KCS 5 -#define IPMI_CHANNEL_PROTOCOL_SMIC 6 -#define IPMI_CHANNEL_PROTOCOL_BT10 7 -#define IPMI_CHANNEL_PROTOCOL_BT15 8 -#define IPMI_CHANNEL_PROTOCOL_TMODE 9 - -#define IPMI_CHANNEL_MEDIUM_IPMB 1 -#define IPMI_CHANNEL_MEDIUM_ICMB10 2 -#define IPMI_CHANNEL_MEDIUM_ICMB09 3 -#define IPMI_CHANNEL_MEDIUM_8023LAN 4 -#define IPMI_CHANNEL_MEDIUM_ASYNC 5 -#define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6 -#define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7 -#define IPMI_CHANNEL_MEDIUM_SMBUS1 8 -#define IPMI_CHANNEL_MEDIUM_SMBUS2 9 -#define IPMI_CHANNEL_MEDIUM_USB1 10 -#define IPMI_CHANNEL_MEDIUM_USB2 11 -#define IPMI_CHANNEL_MEDIUM_SYSINTF 12 -#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 -#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f - -#endif /* __LINUX_IPMI_MSGDEFS_H */ diff --git a/include/linux/ipsec.h b/include/linux/ipsec.h deleted file mode 100644 index d17a6302a0e9..000000000000 --- a/include/linux/ipsec.h +++ /dev/null @@ -1,47 +0,0 @@ -#ifndef _LINUX_IPSEC_H -#define _LINUX_IPSEC_H - -/* The definitions, required to talk to KAME racoon IKE. */ - -#include - -#define IPSEC_PORT_ANY 0 -#define IPSEC_ULPROTO_ANY 255 -#define IPSEC_PROTO_ANY 255 - -enum { - IPSEC_MODE_ANY = 0, /* We do not support this for SA */ - IPSEC_MODE_TRANSPORT = 1, - IPSEC_MODE_TUNNEL = 2, - IPSEC_MODE_BEET = 3 -}; - -enum { - IPSEC_DIR_ANY = 0, - IPSEC_DIR_INBOUND = 1, - IPSEC_DIR_OUTBOUND = 2, - IPSEC_DIR_FWD = 3, /* It is our own */ - IPSEC_DIR_MAX = 4, - IPSEC_DIR_INVALID = 5 -}; - -enum { - IPSEC_POLICY_DISCARD = 0, - IPSEC_POLICY_NONE = 1, - IPSEC_POLICY_IPSEC = 2, - IPSEC_POLICY_ENTRUST = 3, - IPSEC_POLICY_BYPASS = 4 -}; - -enum { - IPSEC_LEVEL_DEFAULT = 0, - IPSEC_LEVEL_USE = 1, - IPSEC_LEVEL_REQUIRE = 2, - IPSEC_LEVEL_UNIQUE = 3 -}; - -#define IPSEC_MANUAL_REQID_MAX 0x3fff - -#define IPSEC_REPLAYWSIZE 32 - -#endif /* _LINUX_IPSEC_H */ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 0b94e91ed685..bcba48a97868 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -1,134 +1,9 @@ #ifndef _IPV6_H #define _IPV6_H -#include -#include -#include +#include -/* The latest drafts declared increase in minimal mtu up to 1280. */ - -#define IPV6_MIN_MTU 1280 - -/* - * Advanced API - * source interface/address selection, source routing, etc... - * *under construction* - */ - - -struct in6_pktinfo { - struct in6_addr ipi6_addr; - int ipi6_ifindex; -}; - -struct ip6_mtuinfo { - struct sockaddr_in6 ip6m_addr; - __u32 ip6m_mtu; -}; - -struct in6_ifreq { - struct in6_addr ifr6_addr; - __u32 ifr6_prefixlen; - int ifr6_ifindex; -}; - -#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */ -#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */ -#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */ - -/* - * routing header - */ -struct ipv6_rt_hdr { - __u8 nexthdr; - __u8 hdrlen; - __u8 type; - __u8 segments_left; - - /* - * type specific data - * variable length field - */ -}; - - -struct ipv6_opt_hdr { - __u8 nexthdr; - __u8 hdrlen; - /* - * TLV encoded option data follows. - */ -} __attribute__((packed)); /* required for some archs */ - -#define ipv6_destopt_hdr ipv6_opt_hdr -#define ipv6_hopopt_hdr ipv6_opt_hdr - -#ifdef __KERNEL__ #define ipv6_optlen(p) (((p)->hdrlen+1) << 3) -#endif - -/* - * routing header type 0 (used in cmsghdr struct) - */ - -struct rt0_hdr { - struct ipv6_rt_hdr rt_hdr; - __u32 reserved; - struct in6_addr addr[0]; - -#define rt0_type rt_hdr.type -}; - -/* - * routing header type 2 - */ - -struct rt2_hdr { - struct ipv6_rt_hdr rt_hdr; - __u32 reserved; - struct in6_addr addr; - -#define rt2_type rt_hdr.type -}; - -/* - * home address option in destination options header - */ - -struct ipv6_destopt_hao { - __u8 type; - __u8 length; - struct in6_addr addr; -} __attribute__((packed)); - -/* - * IPv6 fixed header - * - * BEWARE, it is incorrect. The first 4 bits of flow_lbl - * are glued to priority now, forming "class". - */ - -struct ipv6hdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 priority:4, - version:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 version:4, - priority:4; -#else -#error "Please fix " -#endif - __u8 flow_lbl[3]; - - __be16 payload_len; - __u8 nexthdr; - __u8 hop_limit; - - struct in6_addr saddr; - struct in6_addr daddr; -}; - -#ifdef __KERNEL__ /* * This structure contains configuration options per IPv6 link. */ @@ -180,43 +55,6 @@ struct ipv6_params { __s32 autoconf; }; extern struct ipv6_params ipv6_defaults; -#endif - -/* index values for the variables in ipv6_devconf */ -enum { - DEVCONF_FORWARDING = 0, - DEVCONF_HOPLIMIT, - DEVCONF_MTU6, - DEVCONF_ACCEPT_RA, - DEVCONF_ACCEPT_REDIRECTS, - DEVCONF_AUTOCONF, - DEVCONF_DAD_TRANSMITS, - DEVCONF_RTR_SOLICITS, - DEVCONF_RTR_SOLICIT_INTERVAL, - DEVCONF_RTR_SOLICIT_DELAY, - DEVCONF_USE_TEMPADDR, - DEVCONF_TEMP_VALID_LFT, - DEVCONF_TEMP_PREFERED_LFT, - DEVCONF_REGEN_MAX_RETRY, - DEVCONF_MAX_DESYNC_FACTOR, - DEVCONF_MAX_ADDRESSES, - DEVCONF_FORCE_MLD_VERSION, - DEVCONF_ACCEPT_RA_DEFRTR, - DEVCONF_ACCEPT_RA_PINFO, - DEVCONF_ACCEPT_RA_RTR_PREF, - DEVCONF_RTR_PROBE_INTERVAL, - DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN, - DEVCONF_PROXY_NDP, - DEVCONF_OPTIMISTIC_DAD, - DEVCONF_ACCEPT_SOURCE_ROUTE, - DEVCONF_MC_FORWARDING, - DEVCONF_DISABLE_IPV6, - DEVCONF_ACCEPT_DAD, - DEVCONF_FORCE_TLLAO, - DEVCONF_MAX -}; - -#ifdef __KERNEL__ #include #include #include @@ -541,6 +379,4 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk) (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) -#endif /* __KERNEL__ */ - #endif /* _IPV6_H */ diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h index 1e7d8af2defe..25b5f1f5e780 100644 --- a/include/linux/ipv6_route.h +++ b/include/linux/ipv6_route.h @@ -9,54 +9,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IPV6_ROUTE_H #define _LINUX_IPV6_ROUTE_H -#include - -#define RTF_DEFAULT 0x00010000 /* default - learned via ND */ -#define RTF_ALLONLINK 0x00020000 /* (deprecated and will be removed) - fallback, no routers on link */ -#define RTF_ADDRCONF 0x00040000 /* addrconf route - RA */ -#define RTF_PREFIX_RT 0x00080000 /* A prefix only route - RA */ -#define RTF_ANYCAST 0x00100000 /* Anycast */ - -#define RTF_NONEXTHOP 0x00200000 /* route with no nexthop */ -#define RTF_EXPIRES 0x00400000 - -#define RTF_ROUTEINFO 0x00800000 /* route information - RA */ - -#define RTF_CACHE 0x01000000 /* cache entry */ -#define RTF_FLOW 0x02000000 /* flow significant route */ -#define RTF_POLICY 0x04000000 /* policy route */ - -#define RTF_PREF(pref) ((pref) << 27) -#define RTF_PREF_MASK 0x18000000 +#include -#define RTF_LOCAL 0x80000000 - -#ifdef __KERNEL__ #define IPV6_EXTRACT_PREF(flag) (((flag) & RTF_PREF_MASK) >> 27) #define IPV6_DECODE_PREF(pref) ((pref) ^ 2) /* 1:low,2:med,3:high */ #endif - -struct in6_rtmsg { - struct in6_addr rtmsg_dst; - struct in6_addr rtmsg_src; - struct in6_addr rtmsg_gateway; - __u32 rtmsg_type; - __u16 rtmsg_dst_len; - __u16 rtmsg_src_len; - __u32 rtmsg_metric; - unsigned long rtmsg_info; - __u32 rtmsg_flags; - int rtmsg_ifindex; -}; - -#define RTMSG_NEWDEVICE 0x11 -#define RTMSG_DELDEVICE 0x12 -#define RTMSG_NEWROUTE 0x21 -#define RTMSG_DELROUTE 0x22 - -#endif diff --git a/include/linux/ipx.h b/include/linux/ipx.h deleted file mode 100644 index 3d48014cdd71..000000000000 --- a/include/linux/ipx.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _IPX_H_ -#define _IPX_H_ -#include -#include -#include -#define IPX_NODE_LEN 6 -#define IPX_MTU 576 - -struct sockaddr_ipx { - __kernel_sa_family_t sipx_family; - __be16 sipx_port; - __be32 sipx_network; - unsigned char sipx_node[IPX_NODE_LEN]; - __u8 sipx_type; - unsigned char sipx_zero; /* 16 byte fill */ -}; - -/* - * So we can fit the extra info for SIOCSIFADDR into the address nicely - */ -#define sipx_special sipx_port -#define sipx_action sipx_zero -#define IPX_DLTITF 0 -#define IPX_CRTITF 1 - -struct ipx_route_definition { - __be32 ipx_network; - __be32 ipx_router_network; - unsigned char ipx_router_node[IPX_NODE_LEN]; -}; - -struct ipx_interface_definition { - __be32 ipx_network; - unsigned char ipx_device[16]; - unsigned char ipx_dlink_type; -#define IPX_FRAME_NONE 0 -#define IPX_FRAME_SNAP 1 -#define IPX_FRAME_8022 2 -#define IPX_FRAME_ETHERII 3 -#define IPX_FRAME_8023 4 -#define IPX_FRAME_TR_8022 5 /* obsolete */ - unsigned char ipx_special; -#define IPX_SPECIAL_NONE 0 -#define IPX_PRIMARY 1 -#define IPX_INTERNAL 2 - unsigned char ipx_node[IPX_NODE_LEN]; -}; - -struct ipx_config_data { - unsigned char ipxcfg_auto_select_primary; - unsigned char ipxcfg_auto_create_interfaces; -}; - -/* - * OLD Route Definition for backward compatibility. - */ - -struct ipx_route_def { - __be32 ipx_network; - __be32 ipx_router_network; -#define IPX_ROUTE_NO_ROUTER 0 - unsigned char ipx_router_node[IPX_NODE_LEN]; - unsigned char ipx_device[16]; - unsigned short ipx_flags; -#define IPX_RT_SNAP 8 -#define IPX_RT_8022 4 -#define IPX_RT_BLUEBOOK 2 -#define IPX_RT_ROUTED 1 -}; - -#define SIOCAIPXITFCRT (SIOCPROTOPRIVATE) -#define SIOCAIPXPRISLT (SIOCPROTOPRIVATE + 1) -#define SIOCIPXCFGDATA (SIOCPROTOPRIVATE + 2) -#define SIOCIPXNCPCONN (SIOCPROTOPRIVATE + 3) -#endif /* _IPX_H_ */ diff --git a/include/linux/irda.h b/include/linux/irda.h deleted file mode 100644 index a014c3252311..000000000000 --- a/include/linux/irda.h +++ /dev/null @@ -1,251 +0,0 @@ -/********************************************************************* - * - * Filename: irda.h - * Version: - * Description: - * Status: Experimental. - * Author: Dag Brattli - * Created at: Mon Mar 8 14:06:12 1999 - * Modified at: Sat Dec 25 16:06:42 1999 - * Modified by: Dag Brattli - * - * Copyright (c) 1999 Dag Brattli, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * Neither Dag Brattli nor University of Tromsø admit liability nor - * provide warranty for any of this software. This material is - * provided "AS-IS" and at no charge. - * - ********************************************************************/ - -#ifndef KERNEL_IRDA_H -#define KERNEL_IRDA_H - -#include -#include - -/* Note that this file is shared with user space. */ - -/* Hint bit positions for first hint byte */ -#define HINT_PNP 0x01 -#define HINT_PDA 0x02 -#define HINT_COMPUTER 0x04 -#define HINT_PRINTER 0x08 -#define HINT_MODEM 0x10 -#define HINT_FAX 0x20 -#define HINT_LAN 0x40 -#define HINT_EXTENSION 0x80 - -/* Hint bit positions for second hint byte (first extension byte) */ -#define HINT_TELEPHONY 0x01 -#define HINT_FILE_SERVER 0x02 -#define HINT_COMM 0x04 -#define HINT_MESSAGE 0x08 -#define HINT_HTTP 0x10 -#define HINT_OBEX 0x20 - -/* IrLMP character code values */ -#define CS_ASCII 0x00 -#define CS_ISO_8859_1 0x01 -#define CS_ISO_8859_2 0x02 -#define CS_ISO_8859_3 0x03 -#define CS_ISO_8859_4 0x04 -#define CS_ISO_8859_5 0x05 -#define CS_ISO_8859_6 0x06 -#define CS_ISO_8859_7 0x07 -#define CS_ISO_8859_8 0x08 -#define CS_ISO_8859_9 0x09 -#define CS_UNICODE 0xff - -/* These are the currently known dongles */ -typedef enum { - IRDA_TEKRAM_DONGLE = 0, - IRDA_ESI_DONGLE = 1, - IRDA_ACTISYS_DONGLE = 2, - IRDA_ACTISYS_PLUS_DONGLE = 3, - IRDA_GIRBIL_DONGLE = 4, - IRDA_LITELINK_DONGLE = 5, - IRDA_AIRPORT_DONGLE = 6, - IRDA_OLD_BELKIN_DONGLE = 7, - IRDA_EP7211_IR = 8, - IRDA_MCP2120_DONGLE = 9, - IRDA_ACT200L_DONGLE = 10, - IRDA_MA600_DONGLE = 11, - IRDA_TOIM3232_DONGLE = 12, - IRDA_EP7211_DONGLE = 13, -} IRDA_DONGLE; - -/* Protocol types to be used for SOCK_DGRAM */ -enum { - IRDAPROTO_UNITDATA = 0, - IRDAPROTO_ULTRA = 1, - IRDAPROTO_MAX -}; - -#define SOL_IRLMP 266 /* Same as SOL_IRDA for now */ -#define SOL_IRTTP 266 /* Same as SOL_IRDA for now */ - -#define IRLMP_ENUMDEVICES 1 /* Return discovery log */ -#define IRLMP_IAS_SET 2 /* Set an attribute in local IAS */ -#define IRLMP_IAS_QUERY 3 /* Query remote IAS for attribute */ -#define IRLMP_HINTS_SET 4 /* Set hint bits advertised */ -#define IRLMP_QOS_SET 5 -#define IRLMP_QOS_GET 6 -#define IRLMP_MAX_SDU_SIZE 7 -#define IRLMP_IAS_GET 8 /* Get an attribute from local IAS */ -#define IRLMP_IAS_DEL 9 /* Remove attribute from local IAS */ -#define IRLMP_HINT_MASK_SET 10 /* Set discovery filter */ -#define IRLMP_WAITDEVICE 11 /* Wait for a new discovery */ - -#define IRTTP_MAX_SDU_SIZE IRLMP_MAX_SDU_SIZE /* Compatibility */ - -#define IAS_MAX_STRING 256 /* See IrLMP 1.1, 4.3.3.2 */ -#define IAS_MAX_OCTET_STRING 1024 /* See IrLMP 1.1, 4.3.3.2 */ -#define IAS_MAX_CLASSNAME 60 /* See IrLMP 1.1, 4.3.1 */ -#define IAS_MAX_ATTRIBNAME 60 /* See IrLMP 1.1, 4.3.3.1 */ -#define IAS_MAX_ATTRIBNUMBER 256 /* See IrLMP 1.1, 4.3.3.1 */ -/* For user space backward compatibility - may be fixed in kernel 2.5.X - * Note : need 60+1 ('\0'), make it 64 for alignement - Jean II */ -#define IAS_EXPORT_CLASSNAME 64 -#define IAS_EXPORT_ATTRIBNAME 256 - -/* Attribute type needed for struct irda_ias_set */ -#define IAS_MISSING 0 -#define IAS_INTEGER 1 -#define IAS_OCT_SEQ 2 -#define IAS_STRING 3 - -#define LSAP_ANY 0xff - -struct sockaddr_irda { - __kernel_sa_family_t sir_family; /* AF_IRDA */ - __u8 sir_lsap_sel; /* LSAP selector */ - __u32 sir_addr; /* Device address */ - char sir_name[25]; /* Usually :IrDA:TinyTP */ -}; - -struct irda_device_info { - __u32 saddr; /* Address of local interface */ - __u32 daddr; /* Address of remote device */ - char info[22]; /* Description */ - __u8 charset; /* Charset used for description */ - __u8 hints[2]; /* Hint bits */ -}; - -struct irda_device_list { - __u32 len; - struct irda_device_info dev[1]; -}; - -struct irda_ias_set { - char irda_class_name[IAS_EXPORT_CLASSNAME]; - char irda_attrib_name[IAS_EXPORT_ATTRIBNAME]; - unsigned int irda_attrib_type; - union { - unsigned int irda_attrib_int; - struct { - unsigned short len; - __u8 octet_seq[IAS_MAX_OCTET_STRING]; - } irda_attrib_octet_seq; - struct { - __u8 len; - __u8 charset; - __u8 string[IAS_MAX_STRING]; - } irda_attrib_string; - } attribute; - __u32 daddr; /* Address of device (for some queries only) */ -}; - -/* Some private IOCTL's (max 16) */ -#define SIOCSDONGLE (SIOCDEVPRIVATE + 0) -#define SIOCGDONGLE (SIOCDEVPRIVATE + 1) -#define SIOCSBANDWIDTH (SIOCDEVPRIVATE + 2) -#define SIOCSMEDIABUSY (SIOCDEVPRIVATE + 3) -#define SIOCGMEDIABUSY (SIOCDEVPRIVATE + 4) -#define SIOCGRECEIVING (SIOCDEVPRIVATE + 5) -#define SIOCSMODE (SIOCDEVPRIVATE + 6) -#define SIOCGMODE (SIOCDEVPRIVATE + 7) -#define SIOCSDTRRTS (SIOCDEVPRIVATE + 8) -#define SIOCGQOS (SIOCDEVPRIVATE + 9) - -/* No reason to include just because of this one ;-) */ -#define IRNAMSIZ 16 - -/* IrDA quality of service information (must not exceed 16 bytes) */ -struct if_irda_qos { - unsigned long baudrate; - unsigned short data_size; - unsigned short window_size; - unsigned short min_turn_time; - unsigned short max_turn_time; - unsigned char add_bofs; - unsigned char link_disc; -}; - -/* For setting RTS and DTR lines of a dongle */ -struct if_irda_line { - __u8 dtr; - __u8 rts; -}; - -/* IrDA interface configuration (data part must not exceed 16 bytes) */ -struct if_irda_req { - union { - char ifrn_name[IRNAMSIZ]; /* if name, e.g. "irda0" */ - } ifr_ifrn; - - /* Data part */ - union { - struct if_irda_line ifru_line; - struct if_irda_qos ifru_qos; - unsigned short ifru_flags; - unsigned int ifru_receiving; - unsigned int ifru_mode; - unsigned int ifru_dongle; - } ifr_ifru; -}; - -#define ifr_baudrate ifr_ifru.ifru_qos.baudrate -#define ifr_receiving ifr_ifru.ifru_receiving -#define ifr_dongle ifr_ifru.ifru_dongle -#define ifr_mode ifr_ifru.ifru_mode -#define ifr_dtr ifr_ifru.ifru_line.dtr -#define ifr_rts ifr_ifru.ifru_line.rts - - -/* IrDA netlink definitions */ -#define IRDA_NL_NAME "irda" -#define IRDA_NL_VERSION 1 - -enum irda_nl_commands { - IRDA_NL_CMD_UNSPEC, - IRDA_NL_CMD_SET_MODE, - IRDA_NL_CMD_GET_MODE, - - __IRDA_NL_CMD_AFTER_LAST -}; -#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1) - -enum nl80211_attrs { - IRDA_NL_ATTR_UNSPEC, - IRDA_NL_ATTR_IFNAME, - IRDA_NL_ATTR_MODE, - - __IRDA_NL_ATTR_AFTER_LAST -}; -#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1) - -/* IrDA modes */ -#define IRDA_MODE_PRIMARY 0x1 -#define IRDA_MODE_SECONDARY 0x2 -#define IRDA_MODE_MONITOR 0x4 - -#endif /* KERNEL_IRDA_H */ - - - - diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h index 3bc4dcab6e82..0a2dc46cdaf6 100644 --- a/include/linux/irqnr.h +++ b/include/linux/irqnr.h @@ -1,10 +1,8 @@ #ifndef _LINUX_IRQNR_H #define _LINUX_IRQNR_H -/* - * Generic irq_desc iterators: - */ -#ifdef __KERNEL__ +#include + #ifndef CONFIG_GENERIC_HARDIRQS #include @@ -57,6 +55,4 @@ unsigned int irq_get_next_irq(unsigned int offset); #define for_each_irq_nr(irq) \ for (irq = 0; irq < nr_irqs; irq++) -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 215c41602af8..1e9a0f2a8626 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -10,136 +10,9 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef __ISDN_H__ #define __ISDN_H__ -#include -#include - -#define ISDN_MAX_DRIVERS 32 -#define ISDN_MAX_CHANNELS 64 - -/* New ioctl-codes */ -#define IIOCNETAIF _IO('I',1) -#define IIOCNETDIF _IO('I',2) -#define IIOCNETSCF _IO('I',3) -#define IIOCNETGCF _IO('I',4) -#define IIOCNETANM _IO('I',5) -#define IIOCNETDNM _IO('I',6) -#define IIOCNETGNM _IO('I',7) -#define IIOCGETSET _IO('I',8) /* no longer supported */ -#define IIOCSETSET _IO('I',9) /* no longer supported */ -#define IIOCSETVER _IO('I',10) -#define IIOCNETHUP _IO('I',11) -#define IIOCSETGST _IO('I',12) -#define IIOCSETBRJ _IO('I',13) -#define IIOCSIGPRF _IO('I',14) -#define IIOCGETPRF _IO('I',15) -#define IIOCSETPRF _IO('I',16) -#define IIOCGETMAP _IO('I',17) -#define IIOCSETMAP _IO('I',18) -#define IIOCNETASL _IO('I',19) -#define IIOCNETDIL _IO('I',20) -#define IIOCGETCPS _IO('I',21) -#define IIOCGETDVR _IO('I',22) -#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */ -#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */ - -#define IIOCNETALN _IO('I',32) -#define IIOCNETDLN _IO('I',33) - -#define IIOCNETGPN _IO('I',34) - -#define IIOCDBGVAR _IO('I',127) - -#define IIOCDRVCTL _IO('I',128) - -/* cisco hdlck device private ioctls */ -#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0) -#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1) -#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2) -#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3) - -/* Packet encapsulations for net-interfaces */ -#define ISDN_NET_ENCAP_ETHER 0 -#define ISDN_NET_ENCAP_RAWIP 1 -#define ISDN_NET_ENCAP_IPTYP 2 -#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */ -#define ISDN_NET_ENCAP_SYNCPPP 4 -#define ISDN_NET_ENCAP_UIHDLC 5 -#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ -#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE - -/* Facility which currently uses an ISDN-channel */ -#define ISDN_USAGE_NONE 0 -#define ISDN_USAGE_RAW 1 -#define ISDN_USAGE_MODEM 2 -#define ISDN_USAGE_NET 3 -#define ISDN_USAGE_VOICE 4 -#define ISDN_USAGE_FAX 5 -#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */ -#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */ -#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */ -#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */ - -#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */ -#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */ -#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */ - -#define ISDN_MSNLEN 32 -#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */ -#define TTY_DV 0x06 /* Data version for iprofd etc. */ - -#define INF_DV 0x01 /* Data version for /dev/isdninfo */ - -typedef struct { - char drvid[25]; - unsigned long arg; -} isdn_ioctl_struct; - -typedef struct { - char name[10]; - char phone[ISDN_MSNLEN]; - int outgoing; -} isdn_net_ioctl_phone; - -typedef struct { - char name[10]; /* Name of interface */ - char master[10]; /* Name of Master for Bundling */ - char slave[10]; /* Name of Slave for Bundling */ - char eaz[256]; /* EAZ/MSN */ - char drvid[25]; /* DriverId for Bindings */ - int onhtime; /* Hangup-Timeout */ - int charge; /* Charge-Units */ - int l2_proto; /* Layer-2 protocol */ - int l3_proto; /* Layer-3 protocol */ - int p_encap; /* Encapsulation */ - int exclusive; /* Channel, if bound exclusive */ - int dialmax; /* Dial Retry-Counter */ - int slavedelay; /* Delay until slave starts up */ - int cbdelay; /* Delay before Callback */ - int chargehup; /* Flag: Charge-Hangup */ - int ihup; /* Flag: Hangup-Timeout on incoming line */ - int secure; /* Flag: Secure */ - int callback; /* Flag: Callback */ - int cbhup; /* Flag: Reject Call before Callback */ - int pppbind; /* ippp device for bindings */ - int chargeint; /* Use fixed charge interval length */ - int triggercps; /* BogoCPS needed for triggering slave */ - int dialtimeout; /* Dial-Timeout */ - int dialwait; /* Time to wait after failed dial */ - int dialmode; /* Flag: off / on / auto */ -} isdn_net_ioctl_cfg; - -#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */ -#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */ -#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */ -#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */ -#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK) - -#ifdef __KERNEL__ #include #include @@ -163,6 +36,7 @@ typedef struct { #include #include #include +#include #define ISDN_TTY_MAJOR 43 #define ISDN_TTYAUX_MAJOR 44 @@ -595,6 +469,4 @@ typedef struct isdn_devt { extern isdn_dev *dev; -#endif /* __KERNEL__ */ - #endif /* __ISDN_H__ */ diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h index a5a50f523807..19ab361f9f07 100644 --- a/include/linux/isdn_divertif.h +++ b/include/linux/isdn_divertif.h @@ -9,26 +9,12 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef _LINUX_ISDN_DIVERTIF_H #define _LINUX_ISDN_DIVERTIF_H -/***********************************************************/ -/* magic value is also used to control version information */ -/***********************************************************/ -#define DIVERT_IF_MAGIC 0x25873401 -#define DIVERT_CMD_REG 0x00 /* register command */ -#define DIVERT_CMD_REL 0x01 /* release command */ -#define DIVERT_NO_ERR 0x00 /* return value no error */ -#define DIVERT_CMD_ERR 0x01 /* invalid cmd */ -#define DIVERT_VER_ERR 0x02 /* magic/version invalid */ -#define DIVERT_REG_ERR 0x03 /* module already registered */ -#define DIVERT_REL_ERR 0x04 /* module not registered */ -#define DIVERT_REG_NAME isdn_register_divert - -#ifdef __KERNEL__ #include #include +#include /***************************************************************/ /* structure exchanging data between isdn hl and divert module */ @@ -46,6 +32,4 @@ typedef struct /* function register */ /*********************/ extern int DIVERT_REG_NAME(isdn_divert_if *); -#endif - #endif /* _LINUX_ISDN_DIVERTIF_H */ diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 8687a7dc0632..d5f62bc5f4be 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -9,68 +9,16 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef _LINUX_ISDN_PPP_H #define _LINUX_ISDN_PPP_H -#define CALLTYPE_INCOMING 0x1 -#define CALLTYPE_OUTGOING 0x2 -#define CALLTYPE_CALLBACK 0x4 - -#define IPPP_VERSION "2.2.0" - -struct pppcallinfo -{ - int calltype; - unsigned char local_num[64]; - unsigned char remote_num[64]; - int charge_units; -}; - -#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo) -#define PPPIOCBUNDLE _IOW('t',129,int) -#define PPPIOCGMPFLAGS _IOR('t',130,int) -#define PPPIOCSMPFLAGS _IOW('t',131,int) -#define PPPIOCSMPMTU _IOW('t',132,int) -#define PPPIOCSMPMRU _IOW('t',133,int) -#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8]) -#define PPPIOCSCOMPRESSOR _IOW('t',135,int) -#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] ) - - -#define SC_MP_PROT 0x00000200 -#define SC_REJ_MP_PROT 0x00000400 -#define SC_OUT_SHORT_SEQ 0x00000800 -#define SC_IN_SHORT_SEQ 0x00004000 - -#define SC_DECOMP_ON 0x01 -#define SC_COMP_ON 0x02 -#define SC_DECOMP_DISCARD 0x04 -#define SC_COMP_DISCARD 0x08 -#define SC_LINK_DECOMP_ON 0x10 -#define SC_LINK_COMP_ON 0x20 -#define SC_LINK_DECOMP_DISCARD 0x40 -#define SC_LINK_COMP_DISCARD 0x80 - -#define ISDN_PPP_COMP_MAX_OPTIONS 16 - -#define IPPP_COMP_FLAG_XMIT 0x1 -#define IPPP_COMP_FLAG_LINK 0x2 - -struct isdn_ppp_comp_data { - int num; - unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS]; - int optlen; - int flags; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_IPPP_FILTER #include #endif +#include #define DECOMP_ERR_NOMEM (-10) @@ -244,5 +192,4 @@ struct ippp_struct { unsigned long compflags; }; -#endif /* __KERNEL__ */ #endif /* _LINUX_ISDN_PPP_H */ diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h index b8c23f88dd54..0fc6ff276221 100644 --- a/include/linux/isdnif.h +++ b/include/linux/isdnif.h @@ -10,51 +10,12 @@ * of the GNU General Public License, incorporated herein by reference. * */ - #ifndef __ISDNIF_H__ #define __ISDNIF_H__ -/* - * Values for general protocol-selection - */ -#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */ -#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */ -#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */ -#define ISDN_PTYPE_LEASED 3 /* for leased lines */ -#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */ -#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */ - -/* - * Values for Layer-2-protocol-selection - */ -#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */ -#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_HDLC 3 /* HDLC */ -#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */ -#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */ -#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */ -#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */ -#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */ -#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */ -#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */ -#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */ -#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */ -#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */ - -/* - * Values for Layer-3-protocol-selection - */ -#define ISDN_PROTO_L3_TRANS 0 /* Transparent */ -#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */ -#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */ -#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */ -#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */ - -#ifdef __KERNEL__ - #include +#include /***************************************************************************/ /* Extensions made by Werner Cornelius (werner@ikt.de) */ @@ -541,6 +502,4 @@ typedef struct { extern int register_isdn(isdn_if*); #include -#endif /* __KERNEL__ */ - #endif /* __ISDNIF_H__ */ diff --git a/include/linux/iso_fs.h b/include/linux/iso_fs.h deleted file mode 100644 index 4688ac4284e2..000000000000 --- a/include/linux/iso_fs.h +++ /dev/null @@ -1,165 +0,0 @@ -#ifndef _ISOFS_FS_H -#define _ISOFS_FS_H - -#include -#include - -/* - * The isofs filesystem constants/structures - */ - -/* This part borrowed from the bsd386 isofs */ -#define ISODCL(from, to) (to - from + 1) - -struct iso_volume_descriptor { - char type[ISODCL(1,1)]; /* 711 */ - char id[ISODCL(2,6)]; - char version[ISODCL(7,7)]; - char data[ISODCL(8,2048)]; -}; - -/* volume descriptor types */ -#define ISO_VD_PRIMARY 1 -#define ISO_VD_SUPPLEMENTARY 2 -#define ISO_VD_END 255 - -#define ISO_STANDARD_ID "CD001" - -struct iso_primary_descriptor { - char type [ISODCL ( 1, 1)]; /* 711 */ - char id [ISODCL ( 2, 6)]; - char version [ISODCL ( 7, 7)]; /* 711 */ - char unused1 [ISODCL ( 8, 8)]; - char system_id [ISODCL ( 9, 40)]; /* achars */ - char volume_id [ISODCL ( 41, 72)]; /* dchars */ - char unused2 [ISODCL ( 73, 80)]; - char volume_space_size [ISODCL ( 81, 88)]; /* 733 */ - char unused3 [ISODCL ( 89, 120)]; - char volume_set_size [ISODCL (121, 124)]; /* 723 */ - char volume_sequence_number [ISODCL (125, 128)]; /* 723 */ - char logical_block_size [ISODCL (129, 132)]; /* 723 */ - char path_table_size [ISODCL (133, 140)]; /* 733 */ - char type_l_path_table [ISODCL (141, 144)]; /* 731 */ - char opt_type_l_path_table [ISODCL (145, 148)]; /* 731 */ - char type_m_path_table [ISODCL (149, 152)]; /* 732 */ - char opt_type_m_path_table [ISODCL (153, 156)]; /* 732 */ - char root_directory_record [ISODCL (157, 190)]; /* 9.1 */ - char volume_set_id [ISODCL (191, 318)]; /* dchars */ - char publisher_id [ISODCL (319, 446)]; /* achars */ - char preparer_id [ISODCL (447, 574)]; /* achars */ - char application_id [ISODCL (575, 702)]; /* achars */ - char copyright_file_id [ISODCL (703, 739)]; /* 7.5 dchars */ - char abstract_file_id [ISODCL (740, 776)]; /* 7.5 dchars */ - char bibliographic_file_id [ISODCL (777, 813)]; /* 7.5 dchars */ - char creation_date [ISODCL (814, 830)]; /* 8.4.26.1 */ - char modification_date [ISODCL (831, 847)]; /* 8.4.26.1 */ - char expiration_date [ISODCL (848, 864)]; /* 8.4.26.1 */ - char effective_date [ISODCL (865, 881)]; /* 8.4.26.1 */ - char file_structure_version [ISODCL (882, 882)]; /* 711 */ - char unused4 [ISODCL (883, 883)]; - char application_data [ISODCL (884, 1395)]; - char unused5 [ISODCL (1396, 2048)]; -}; - -/* Almost the same as the primary descriptor but two fields are specified */ -struct iso_supplementary_descriptor { - char type [ISODCL ( 1, 1)]; /* 711 */ - char id [ISODCL ( 2, 6)]; - char version [ISODCL ( 7, 7)]; /* 711 */ - char flags [ISODCL ( 8, 8)]; /* 853 */ - char system_id [ISODCL ( 9, 40)]; /* achars */ - char volume_id [ISODCL ( 41, 72)]; /* dchars */ - char unused2 [ISODCL ( 73, 80)]; - char volume_space_size [ISODCL ( 81, 88)]; /* 733 */ - char escape [ISODCL ( 89, 120)]; /* 856 */ - char volume_set_size [ISODCL (121, 124)]; /* 723 */ - char volume_sequence_number [ISODCL (125, 128)]; /* 723 */ - char logical_block_size [ISODCL (129, 132)]; /* 723 */ - char path_table_size [ISODCL (133, 140)]; /* 733 */ - char type_l_path_table [ISODCL (141, 144)]; /* 731 */ - char opt_type_l_path_table [ISODCL (145, 148)]; /* 731 */ - char type_m_path_table [ISODCL (149, 152)]; /* 732 */ - char opt_type_m_path_table [ISODCL (153, 156)]; /* 732 */ - char root_directory_record [ISODCL (157, 190)]; /* 9.1 */ - char volume_set_id [ISODCL (191, 318)]; /* dchars */ - char publisher_id [ISODCL (319, 446)]; /* achars */ - char preparer_id [ISODCL (447, 574)]; /* achars */ - char application_id [ISODCL (575, 702)]; /* achars */ - char copyright_file_id [ISODCL (703, 739)]; /* 7.5 dchars */ - char abstract_file_id [ISODCL (740, 776)]; /* 7.5 dchars */ - char bibliographic_file_id [ISODCL (777, 813)]; /* 7.5 dchars */ - char creation_date [ISODCL (814, 830)]; /* 8.4.26.1 */ - char modification_date [ISODCL (831, 847)]; /* 8.4.26.1 */ - char expiration_date [ISODCL (848, 864)]; /* 8.4.26.1 */ - char effective_date [ISODCL (865, 881)]; /* 8.4.26.1 */ - char file_structure_version [ISODCL (882, 882)]; /* 711 */ - char unused4 [ISODCL (883, 883)]; - char application_data [ISODCL (884, 1395)]; - char unused5 [ISODCL (1396, 2048)]; -}; - - -#define HS_STANDARD_ID "CDROM" - -struct hs_volume_descriptor { - char foo [ISODCL ( 1, 8)]; /* 733 */ - char type [ISODCL ( 9, 9)]; /* 711 */ - char id [ISODCL ( 10, 14)]; - char version [ISODCL ( 15, 15)]; /* 711 */ - char data[ISODCL(16,2048)]; -}; - - -struct hs_primary_descriptor { - char foo [ISODCL ( 1, 8)]; /* 733 */ - char type [ISODCL ( 9, 9)]; /* 711 */ - char id [ISODCL ( 10, 14)]; - char version [ISODCL ( 15, 15)]; /* 711 */ - char unused1 [ISODCL ( 16, 16)]; /* 711 */ - char system_id [ISODCL ( 17, 48)]; /* achars */ - char volume_id [ISODCL ( 49, 80)]; /* dchars */ - char unused2 [ISODCL ( 81, 88)]; /* 733 */ - char volume_space_size [ISODCL ( 89, 96)]; /* 733 */ - char unused3 [ISODCL ( 97, 128)]; /* 733 */ - char volume_set_size [ISODCL (129, 132)]; /* 723 */ - char volume_sequence_number [ISODCL (133, 136)]; /* 723 */ - char logical_block_size [ISODCL (137, 140)]; /* 723 */ - char path_table_size [ISODCL (141, 148)]; /* 733 */ - char type_l_path_table [ISODCL (149, 152)]; /* 731 */ - char unused4 [ISODCL (153, 180)]; /* 733 */ - char root_directory_record [ISODCL (181, 214)]; /* 9.1 */ -}; - -/* We use this to help us look up the parent inode numbers. */ - -struct iso_path_table{ - unsigned char name_len[2]; /* 721 */ - char extent[4]; /* 731 */ - char parent[2]; /* 721 */ - char name[0]; -} __attribute__((packed)); - -/* high sierra is identical to iso, except that the date is only 6 bytes, and - there is an extra reserved byte after the flags */ - -struct iso_directory_record { - char length [ISODCL (1, 1)]; /* 711 */ - char ext_attr_length [ISODCL (2, 2)]; /* 711 */ - char extent [ISODCL (3, 10)]; /* 733 */ - char size [ISODCL (11, 18)]; /* 733 */ - char date [ISODCL (19, 25)]; /* 7 by 711 */ - char flags [ISODCL (26, 26)]; - char file_unit_size [ISODCL (27, 27)]; /* 711 */ - char interleave [ISODCL (28, 28)]; /* 711 */ - char volume_sequence_number [ISODCL (29, 32)]; /* 723 */ - unsigned char name_len [ISODCL (33, 33)]; /* 711 */ - char name [0]; -} __attribute__((packed)); - -#define ISOFS_BLOCK_BITS 11 -#define ISOFS_BLOCK_SIZE 2048 - -#define ISOFS_BUFFER_SIZE(INODE) ((INODE)->i_sb->s_blocksize) -#define ISOFS_BUFFER_BITS(INODE) ((INODE)->i_sb->s_blocksize_bits) - -#endif /* _ISOFS_FS_H */ diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h deleted file mode 100644 index 42bf725751af..000000000000 --- a/include/linux/ivtv.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - Public ivtv API header - Copyright (C) 2003-2004 Kevin Thayer - Copyright (C) 2004-2007 Hans Verkuil - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_IVTV_H__ -#define __LINUX_IVTV_H__ - -#include -#include -#include - -/* ivtv knows several distinct output modes: MPEG streaming, - YUV streaming, YUV updates through user DMA and the passthrough - mode. - - In order to clearly tell the driver that we are in user DMA - YUV mode you need to call IVTV_IOC_DMA_FRAME with y_source == NULL - first (althrough if you don't then the first time - DMA_FRAME is called the mode switch is done automatically). - - When you close the file handle the user DMA mode is exited again. - - While in one mode, you cannot use another mode (EBUSY is returned). - - All this means that if you want to change the YUV interlacing - for the user DMA YUV mode you first need to do call IVTV_IOC_DMA_FRAME - with y_source == NULL before you can set the correct format using - VIDIOC_S_FMT. - - Eventually all this should be replaced with a proper V4L2 API, - but for now we have to do it this way. */ - -struct ivtv_dma_frame { - enum v4l2_buf_type type; /* V4L2_BUF_TYPE_VIDEO_OUTPUT */ - __u32 pixelformat; /* 0 == same as destination */ - void __user *y_source; /* if NULL and type == V4L2_BUF_TYPE_VIDEO_OUTPUT, - then just switch to user DMA YUV output mode */ - void __user *uv_source; /* Unused for RGB pixelformats */ - struct v4l2_rect src; - struct v4l2_rect dst; - __u32 src_width; - __u32 src_height; -}; - -#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) - -/* Select the passthrough mode (if the argument is non-zero). In the passthrough - mode the output of the encoder is passed immediately into the decoder. */ -#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int) - -/* Deprecated defines: applications should use the defines from videodev2.h */ -#define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B -#define IVTV_SLICED_TYPE_CAPTION_525 V4L2_MPEG_VBI_IVTV_CAPTION_525 -#define IVTV_SLICED_TYPE_WSS_625 V4L2_MPEG_VBI_IVTV_WSS_625 -#define IVTV_SLICED_TYPE_VPS V4L2_MPEG_VBI_IVTV_VPS - -#endif /* _LINUX_IVTV_H */ diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h deleted file mode 100644 index e8b92f67f10d..000000000000 --- a/include/linux/ivtvfb.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - On Screen Display cx23415 Framebuffer driver - - Copyright (C) 2006, 2007 Ian Armstrong - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_IVTVFB_H__ -#define __LINUX_IVTVFB_H__ - -#include -#include - -/* Framebuffer external API */ - -struct ivtvfb_dma_frame { - void __user *source; - unsigned long dest_offset; - int count; -}; - -#define IVTVFB_IOC_DMA_FRAME _IOW('V', BASE_VIDIOC_PRIVATE+0, struct ivtvfb_dma_frame) - -#endif diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h deleted file mode 100644 index 94ab5e942e53..000000000000 --- a/include/linux/ixjuser.h +++ /dev/null @@ -1,720 +0,0 @@ -#ifndef __LINUX_IXJUSER_H -#define __LINUX_IXJUSER_H - -/****************************************************************************** - * - * ixjuser.h - * - * Device Driver for Quicknet Technologies, Inc.'s Telephony cards - * including the Internet PhoneJACK, Internet PhoneJACK Lite, - * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and - * SmartCABLE - * - * (c) Copyright 1999-2001 Quicknet Technologies, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Author: Ed Okerson, - * - * Contributors: Greg Herlein, - * David W. Erhart, - * John Sellers, - * Mike Preston, - * - * More information about the hardware related to this driver can be found - * at our website: http://www.quicknet.net - * - * Fixes: - * - * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR - * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT - * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET - * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION - * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. - * - *****************************************************************************/ - -#include - - -/****************************************************************************** -* -* IOCTL's used for the Quicknet Telephony Cards -* -* If you use the IXJCTL_TESTRAM command, the card must be power cycled to -* reset the SRAM values before further use. -* -******************************************************************************/ - -#define IXJCTL_DSP_RESET _IO ('q', 0xC0) - -#define IXJCTL_RING PHONE_RING -#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE -#define IXJCTL_MAXRINGS PHONE_MAXRINGS -#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE -#define IXJCTL_RING_START PHONE_RING_START -#define IXJCTL_RING_STOP PHONE_RING_STOP - -#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int) -#define IXJCTL_SERIAL _IOR ('q', 0xC2, int) -#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int) -#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int) -#define IXJCTL_VERSION _IOR ('q', 0xDA, char *) -#define IXJCTL_DSP_IDLE _IO ('q', 0xC5) -#define IXJCTL_TESTRAM _IO ('q', 0xC6) - -/****************************************************************************** -* -* This group of IOCTLs deal with the record settings of the DSP -* -* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP. -* Setting a lower depth reduces latency, but increases the demand of the -* application to service the driver without frame loss. The DSP has 480 -* bytes of physical buffer memory for the record channel so the true -* maximum limit is determined by how many frames will fit in the buffer. -* -* 1 uncompressed (480 byte) 16-bit linear frame. -* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames. -* 15 TrueSpeech 8.5 frames. -* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames. -* -* The default in the driver is currently set to 2 frames. -* -* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8 -* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the -* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given -* against over-scaling, if the multiplication factor times the input -* signal exceeds 16 bits, overflow distortion will occur. The default -* setting is 0x100 (1.0). -* -* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on -* the most recently recorded frame as a 16 bit value. -******************************************************************************/ - -#define IXJCTL_REC_CODEC PHONE_REC_CODEC -#define IXJCTL_REC_START PHONE_REC_START -#define IXJCTL_REC_STOP PHONE_REC_STOP -#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH -#define IXJCTL_FRAME PHONE_FRAME -#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME -#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL - -typedef enum { - f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50, - f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400, - f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450, - f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450, - f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587, - f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850, - f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400, - f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336, - lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860 -} IXJ_FILTER_FREQ; - -typedef struct { - unsigned int filter; - IXJ_FILTER_FREQ freq; - char enable; -} IXJ_FILTER; - -typedef struct { - char enable; - char en_filter; - unsigned int filter; - unsigned int on1; - unsigned int off1; - unsigned int on2; - unsigned int off2; - unsigned int on3; - unsigned int off3; -} IXJ_FILTER_CADENCE; - -#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *) -#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *) -#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int) -#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *) -#define IXJCTL_PLAY_CID _IO ('q', 0xD7) -/****************************************************************************** -* -* This IOCTL allows you to reassign values in the tone index table. The -* tone table has 32 entries (0 - 31), but the driver only allows entries -* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are -* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D. -* The positions used internally for Call Progress Tones are as follows: -* Dial Tone - 25 -* Ring Back - 26 -* Busy Signal - 27 -* -* The freq values are calculated as: -* freq = cos(2 * PI * frequency / 8000) -* -* The most commonly needed values are already calculated and listed in the -* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with -* different gains, if you are only using a single frequency set the unused -* one to 0. -* -* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB -* increments. -* -******************************************************************************/ - -typedef enum { - hz20 = 0x7ffa, - hz50 = 0x7fe5, - hz133 = 0x7f4c, - hz200 = 0x7e6b, - hz261 = 0x7d50, /* .63 C1 */ - hz277 = 0x7cfa, /* .18 CS1 */ - hz293 = 0x7c9f, /* .66 D1 */ - hz300 = 0x7c75, - hz311 = 0x7c32, /* .13 DS1 */ - hz329 = 0x7bbf, /* .63 E1 */ - hz330 = 0x7bb8, - hz340 = 0x7b75, - hz349 = 0x7b37, /* .23 F1 */ - hz350 = 0x7b30, - hz360 = 0x7ae9, - hz369 = 0x7aa8, /* .99 FS1 */ - hz380 = 0x7a56, - hz392 = 0x79fa, /* .00 G1 */ - hz400 = 0x79bb, - hz415 = 0x7941, /* .30 GS1 */ - hz420 = 0x7918, - hz425 = 0x78ee, - hz435 = 0x7899, - hz440 = 0x786d, /* .00 A1 */ - hz445 = 0x7842, - hz450 = 0x7815, - hz452 = 0x7803, - hz466 = 0x7784, /* .16 AS1 */ - hz475 = 0x7731, - hz480 = 0x7701, - hz493 = 0x7685, /* .88 B1 */ - hz494 = 0x767b, - hz500 = 0x7640, - hz520 = 0x7578, - hz523 = 0x7559, /* .25 C2 */ - hz525 = 0x7544, - hz540 = 0x74a7, - hz554 = 0x7411, /* .37 CS2 */ - hz587 = 0x72a1, /* .33 D2 */ - hz590 = 0x727f, - hz600 = 0x720b, - hz620 = 0x711e, - hz622 = 0x7106, /* .25 DS2 */ - hz659 = 0x6f3b, /* .26 E2 */ - hz660 = 0x6f2e, - hz698 = 0x6d3d, /* .46 F2 */ - hz700 = 0x6d22, - hz739 = 0x6b09, /* .99 FS2 */ - hz740 = 0x6afa, - hz750 = 0x6a6c, - hz770 = 0x694b, - hz783 = 0x688b, /* .99 G2 */ - hz800 = 0x678d, - hz816 = 0x6698, - hz830 = 0x65bf, /* .61 GS2 */ - hz850 = 0x6484, - hz857 = 0x6414, - hz880 = 0x629f, /* .00 A2 */ - hz900 = 0x6154, - hz932 = 0x5f35, /* .33 AS2 */ - hz935 = 0x5f01, - hz941 = 0x5e9a, - hz942 = 0x5e88, - hz950 = 0x5dfd, - hz975 = 0x5c44, - hz1000 = 0x5a81, - hz1020 = 0x5912, - hz1050 = 0x56e2, - hz1100 = 0x5320, - hz1140 = 0x5007, - hz1200 = 0x4b3b, - hz1209 = 0x4a80, - hz1215 = 0x4a02, - hz1250 = 0x471c, - hz1300 = 0x42e0, - hz1330 = 0x4049, - hz1336 = 0x3fc4, - hz1366 = 0x3d22, - hz1380 = 0x3be4, - hz1400 = 0x3a1b, - hz1450 = 0x3596, - hz1477 = 0x331c, - hz1500 = 0x30fb, - hz1600 = 0x278d, - hz1633 = 0x2462, - hz1638 = 0x23e7, - hz1645 = 0x233a, - hz1750 = 0x18f8, - hz1800 = 0x1405, - hz1860 = 0xe0b, - hz2100 = 0xf5f6, - hz2130 = 0xf2f5, - hz2450 = 0xd3b3, - hz2750 = 0xb8e4 -} IXJ_FREQ; - -typedef enum { - C1 = hz261, - CS1 = hz277, - D1 = hz293, - DS1 = hz311, - E1 = hz329, - F1 = hz349, - FS1 = hz369, - G1 = hz392, - GS1 = hz415, - A1 = hz440, - AS1 = hz466, - B1 = hz493, - C2 = hz523, - CS2 = hz554, - D2 = hz587, - DS2 = hz622, - E2 = hz659, - F2 = hz698, - FS2 = hz739, - G2 = hz783, - GS2 = hz830, - A2 = hz880, - AS2 = hz932, -} IXJ_NOTE; - -typedef struct { - int tone_index; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_TONE; - -#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *) - -/****************************************************************************** -* -* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various -* Call Progress Tones (CPT). This is accomplished by setting up an array of -* IXJ_CADENCE_ELEMENT structures that sequentially define the states of -* the tone sequence. The tone_on_time and tone_off time are in -* 250 microsecond intervals. A pointer to this array is passed to the -* driver as the ce element of an IXJ_CADENCE structure. The elements_used -* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The -* termination variable defines what to do at the end of a cadence, the -* options are to play the cadence once and stop, to repeat the last -* element of the cadence indefinitely, or to repeat the entire cadence -* indefinitely. The ce variable is a pointer to the array of IXJ_TONE -* structures. If the freq0 variable is non-zero, the tone table contents -* for the tone_index are updated to the frequencies and gains defined. It -* should be noted that DTMF tones cannot be reassigned, so if DTMF tone -* table indexes are used in a cadence the frequency and gain variables will -* be ignored. -* -* If the array elements contain frequency parameters the driver will -* initialize the needed tone table elements and begin playing the tone, -* there is no preset limit on the number of elements in the cadence. If -* there is more than one frequency used in the cadence, sequential elements -* of different frequencies MUST use different tone table indexes. Only one -* cadence can be played at a time. It is possible to build complex -* cadences with multiple frequencies using 2 tone table indexes by -* alternating between them. -* -******************************************************************************/ - -typedef struct { - int index; - int tone_on_time; - int tone_off_time; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_CADENCE_ELEMENT; - -typedef enum { - PLAY_ONCE, - REPEAT_LAST_ELEMENT, - REPEAT_ALL -} IXJ_CADENCE_TERM; - -typedef struct { - int elements_used; - IXJ_CADENCE_TERM termination; - IXJ_CADENCE_ELEMENT __user *ce; -} IXJ_CADENCE; - -#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *) -/****************************************************************************** -* -* This group of IOCTLs deal with the playback settings of the DSP -* -******************************************************************************/ - -#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC -#define IXJCTL_PLAY_START PHONE_PLAY_START -#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP -#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH -#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME -#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL - -/****************************************************************************** -* -* This group of IOCTLs deal with the Acoustic Echo Cancellation settings -* of the DSP -* -* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the -* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar -* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC. -******************************************************************************/ -#define IXJCTL_AEC_START _IOW ('q', 0xCB, int) -#define IXJCTL_AEC_STOP _IO ('q', 0xCC) -#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD) - -#define AEC_OFF 0 -#define AEC_LOW 1 -#define AEC_MED 2 -#define AEC_HIGH 3 -#define AEC_AUTO 4 -#define AEC_AGC 5 -/****************************************************************************** -* -* Call Progress Tones, DTMF, etc. -* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band -* only. If you pass a 1, DTMF is suppressed from the audio stream. -* Tone on and off times are in 250 microsecond intervals so -* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360); -* will set the tone on time of board ixj1 to 360 * 250us = 90ms -* the default values of tone on and off times is 840 or 210ms -******************************************************************************/ - -#define IXJCTL_DTMF_READY PHONE_DTMF_READY -#define IXJCTL_GET_DTMF PHONE_GET_DTMF -#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII -#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB -#define IXJCTL_EXCEPTION PHONE_EXCEPTION -#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE -#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME -#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME -#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE -#define IXJCTL_BUSY PHONE_BUSY -#define IXJCTL_RINGBACK PHONE_RINGBACK -#define IXJCTL_DIALTONE PHONE_DIALTONE -#define IXJCTL_CPT_STOP PHONE_CPT_STOP - -/****************************************************************************** -* LineJACK specific IOCTLs -* -* The lsb 4 bits of the LED argument represent the state of each of the 4 -* LED's on the LineJACK -******************************************************************************/ - -#define IXJCTL_SET_LED _IOW ('q', 0xCE, int) -#define IXJCTL_MIXER _IOW ('q', 0xCF, int) - -/****************************************************************************** -* -* The master volume controls use attenuation with 32 levels from 0 to -62dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_MASTER_L 0x0000 -#define MIXER_MASTER_R 0x0100 -#define ATT00DB 0x00 -#define ATT02DB 0x01 -#define ATT04DB 0x02 -#define ATT06DB 0x03 -#define ATT08DB 0x04 -#define ATT10DB 0x05 -#define ATT12DB 0x06 -#define ATT14DB 0x07 -#define ATT16DB 0x08 -#define ATT18DB 0x09 -#define ATT20DB 0x0A -#define ATT22DB 0x0B -#define ATT24DB 0x0C -#define ATT26DB 0x0D -#define ATT28DB 0x0E -#define ATT30DB 0x0F -#define ATT32DB 0x10 -#define ATT34DB 0x11 -#define ATT36DB 0x12 -#define ATT38DB 0x13 -#define ATT40DB 0x14 -#define ATT42DB 0x15 -#define ATT44DB 0x16 -#define ATT46DB 0x17 -#define ATT48DB 0x18 -#define ATT50DB 0x19 -#define ATT52DB 0x1A -#define ATT54DB 0x1B -#define ATT56DB 0x1C -#define ATT58DB 0x1D -#define ATT60DB 0x1E -#define ATT62DB 0x1F -#define MASTER_MUTE 0x80 - -/****************************************************************************** -* -* The input volume controls use gain with 32 levels from +12dB to -50dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_CD_L 0x0600 -#define MIXER_PORT_CD_R 0x0700 -#define MIXER_PORT_LINE_IN_L 0x0800 -#define MIXER_PORT_LINE_IN_R 0x0900 -#define MIXER_PORT_POTS_REC 0x0C00 -#define MIXER_PORT_MIC 0x0E00 - -#define GAIN12DB 0x00 -#define GAIN10DB 0x01 -#define GAIN08DB 0x02 -#define GAIN06DB 0x03 -#define GAIN04DB 0x04 -#define GAIN02DB 0x05 -#define GAIN00DB 0x06 -#define GAIN_02DB 0x07 -#define GAIN_04DB 0x08 -#define GAIN_06DB 0x09 -#define GAIN_08DB 0x0A -#define GAIN_10DB 0x0B -#define GAIN_12DB 0x0C -#define GAIN_14DB 0x0D -#define GAIN_16DB 0x0E -#define GAIN_18DB 0x0F -#define GAIN_20DB 0x10 -#define GAIN_22DB 0x11 -#define GAIN_24DB 0x12 -#define GAIN_26DB 0x13 -#define GAIN_28DB 0x14 -#define GAIN_30DB 0x15 -#define GAIN_32DB 0x16 -#define GAIN_34DB 0x17 -#define GAIN_36DB 0x18 -#define GAIN_38DB 0x19 -#define GAIN_40DB 0x1A -#define GAIN_42DB 0x1B -#define GAIN_44DB 0x1C -#define GAIN_46DB 0x1D -#define GAIN_48DB 0x1E -#define GAIN_50DB 0x1F -#define INPUT_MUTE 0x80 - -/****************************************************************************** -* -* The POTS volume control use attenuation with 8 levels from 0dB to -28dB -* with steps of 4dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_POTS_PLAY 0x0F00 - -#define POTS_ATT_00DB 0x00 -#define POTS_ATT_04DB 0x01 -#define POTS_ATT_08DB 0x02 -#define POTS_ATT_12DB 0x03 -#define POTS_ATT_16DB 0x04 -#define POTS_ATT_20DB 0x05 -#define POTS_ATT_24DB 0x06 -#define POTS_ATT_28DB 0x07 -#define POTS_MUTE 0x80 - -/****************************************************************************** -* -* The DAA controls the interface to the PSTN port. The driver loads the -* US coefficients by default, so if you live in a different country you -* need to load the set for your countries phone system. -* -******************************************************************************/ -#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int) - -#define DAA_US 1 /*PITA 8kHz */ -#define DAA_UK 2 /*ISAR34 8kHz */ -#define DAA_FRANCE 3 /* */ -#define DAA_GERMANY 4 -#define DAA_AUSTRALIA 5 -#define DAA_JAPAN 6 - -/****************************************************************************** -* -* Use IXJCTL_PORT to set or query the port the card is set to. If the -* argument is set to PORT_QUERY, the return value of the ioctl will -* indicate which port is currently in use, otherwise it will change the -* port. -* -******************************************************************************/ -#define IXJCTL_PORT _IOW ('q', 0xD1, int) - -#define PORT_QUERY 0 -#define PORT_POTS 1 -#define PORT_PSTN 2 -#define PORT_SPEAKER 3 -#define PORT_HANDSET 4 - -#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE -#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE - -#define PSTN_ON_HOOK 0 -#define PSTN_RINGING 1 -#define PSTN_OFF_HOOK 2 -#define PSTN_PULSE_DIAL 3 - -/****************************************************************************** -* -* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), -* and the transmit gain (AGX). OR together the components and pass them -* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB. -* -******************************************************************************/ -#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int) - -#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */ -#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */ -#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */ - -#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */ -#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */ -#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */ -#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */ - -#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3) - -#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *) -#define IXJCTL_VMWI _IOR ('q', 0xD8, int) -#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *) -/****************************************************************************** -* -* The wink duration is tunable with this ioctl. The default wink duration -* is 320ms. You do not need to use this ioctl if you do not require a -* different wink duration. -* -******************************************************************************/ -#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION - -/****************************************************************************** -* -* This ioctl will connect the POTS port to the PSTN port on the LineJACK -* In order for this to work properly the port selection should be set to -* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will -* enable conference calls between PSTN callers and network callers. -* Passing a 1 to this ioctl enables the POTS<->PSTN connection while -* passing a 0 turns it back off. -* -******************************************************************************/ -#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int) - -/****************************************************************************** -* -* IOCTLs added by request. -* -* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in -* /usr/include/asm/param.h, this determines the fundamental -* frequency of the clock ticks on your Linux system. The kernel -* must be rebuilt if you change this value, also all modules you -* use (except this one) must be recompiled. The default value -* is 100, and you only need to use this IOCTL if you use some -* other value. -* -* -* IXJCTL_RATE sets the number of times per second that the driver polls -* the DSP. This value cannot be larger than HZ. By -* increasing both of these values, you may be able to reduce -* latency because the max hang time that can exist between the -* driver and the DSP will be reduced. -* -******************************************************************************/ - -#define IXJCTL_HZ _IOW ('q', 0xE0, int) -#define IXJCTL_RATE _IOW ('q', 0xE1, int) -#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long) -#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long) -#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long) -#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long) -#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long) -#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7) -#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int) - -/****************************************************************************** -* -* This ioctl allows the user application to control what events the driver -* will send signals for, and what signals it will send for which event. -* By default, if signaling is enabled, all events will send SIGIO when -* they occur. To disable signals for an event set the signal to 0. -* -******************************************************************************/ -typedef enum { - SIG_DTMF_READY, - SIG_HOOKSTATE, - SIG_FLASH, - SIG_PSTN_RING, - SIG_CALLER_ID, - SIG_PSTN_WINK, - SIG_F0, SIG_F1, SIG_F2, SIG_F3, - SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3, - SIG_READ_READY = 33, - SIG_WRITE_READY = 34 -} IXJ_SIGEVENT; - -typedef struct { - unsigned int event; - int signal; -} IXJ_SIGDEF; - -#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *) - -/****************************************************************************** -* -* These ioctls allow the user application to change the gain in the -* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause -* return value to be the current setting. Valid values to set are 0x00 - 0x1F -* -* 11111 = +12 dB -* 10111 = 0 dB -* 00000 = -34.5 dB -* -* IXJCTL_SC_RXG sets the Receive gain -* IXJCTL_SC_TXG sets the Transmit gain -* -******************************************************************************/ -#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int) -#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int) - -/****************************************************************************** -* -* The intercom IOCTL's short the output from one card to the input of the -* other and vice versa (actually done in the DSP read function). It is only -* necessary to execute the IOCTL on one card, but it is necessary to have -* both devices open to be able to detect hook switch changes. The record -* codec and rate of each card must match the playback codec and rate of -* the other card for this to work properly. -* -******************************************************************************/ - -#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int) -#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int) - -/****************************************************************************** - * - * new structure for accessing raw filter information - * - ******************************************************************************/ - -typedef struct { - unsigned int filter; - char enable; - unsigned int coeff[19]; -} IXJ_FILTER_RAW; - -#endif diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h deleted file mode 100644 index a18b719f49d4..000000000000 --- a/include/linux/jffs2.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * JFFS2 -- Journalling Flash File System, Version 2. - * - * Copyright © 2001-2007 Red Hat, Inc. - * Copyright © 2004-2010 David Woodhouse - * - * Created by David Woodhouse - * - * For licensing information, see the file 'LICENCE' in the - * jffs2 directory. - */ - -#ifndef __LINUX_JFFS2_H__ -#define __LINUX_JFFS2_H__ - -#include -#include - -/* You must include something which defines the C99 uintXX_t types. - We don't do it from here because this file is used in too many - different environments. */ - -/* Values we may expect to find in the 'magic' field */ -#define JFFS2_OLD_MAGIC_BITMASK 0x1984 -#define JFFS2_MAGIC_BITMASK 0x1985 -#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */ -#define JFFS2_EMPTY_BITMASK 0xffff -#define JFFS2_DIRTY_BITMASK 0x0000 - -/* Summary node MAGIC marker */ -#define JFFS2_SUM_MAGIC 0x02851885 - -/* We only allow a single char for length, and 0xFF is empty flash so - we don't want it confused with a real length. Hence max 254. -*/ -#define JFFS2_MAX_NAME_LEN 254 - -/* How small can we sensibly write nodes? */ -#define JFFS2_MIN_DATA_LEN 128 - -#define JFFS2_COMPR_NONE 0x00 -#define JFFS2_COMPR_ZERO 0x01 -#define JFFS2_COMPR_RTIME 0x02 -#define JFFS2_COMPR_RUBINMIPS 0x03 -#define JFFS2_COMPR_COPY 0x04 -#define JFFS2_COMPR_DYNRUBIN 0x05 -#define JFFS2_COMPR_ZLIB 0x06 -#define JFFS2_COMPR_LZO 0x07 -/* Compatibility flags. */ -#define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */ -#define JFFS2_NODE_ACCURATE 0x2000 -/* INCOMPAT: Fail to mount the filesystem */ -#define JFFS2_FEATURE_INCOMPAT 0xc000 -/* ROCOMPAT: Mount read-only */ -#define JFFS2_FEATURE_ROCOMPAT 0x8000 -/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */ -#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000 -/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */ -#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000 - -#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1) -#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2) -#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) -#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4) - -#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6) - -#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8) -#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9) - -/* XATTR Related */ -#define JFFS2_XPREFIX_USER 1 /* for "user." */ -#define JFFS2_XPREFIX_SECURITY 2 /* for "security." */ -#define JFFS2_XPREFIX_ACL_ACCESS 3 /* for "system.posix_acl_access" */ -#define JFFS2_XPREFIX_ACL_DEFAULT 4 /* for "system.posix_acl_default" */ -#define JFFS2_XPREFIX_TRUSTED 5 /* for "trusted.*" */ - -#define JFFS2_ACL_VERSION 0x0001 - -// Maybe later... -//#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) -//#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4) - - -#define JFFS2_INO_FLAG_PREREAD 1 /* Do read_inode() for this one at - mount time, don't wait for it to - happen later */ -#define JFFS2_INO_FLAG_USERCOMPR 2 /* User has requested a specific - compression type */ - - -/* These can go once we've made sure we've caught all uses without - byteswapping */ - -typedef struct { - __u32 v32; -} __attribute__((packed)) jint32_t; - -typedef struct { - __u32 m; -} __attribute__((packed)) jmode_t; - -typedef struct { - __u16 v16; -} __attribute__((packed)) jint16_t; - -struct jffs2_unknown_node -{ - /* All start like this */ - jint16_t magic; - jint16_t nodetype; - jint32_t totlen; /* So we can skip over nodes we don't grok */ - jint32_t hdr_crc; -}; - -struct jffs2_raw_dirent -{ - jint16_t magic; - jint16_t nodetype; /* == JFFS2_NODETYPE_DIRENT */ - jint32_t totlen; - jint32_t hdr_crc; - jint32_t pino; - jint32_t version; - jint32_t ino; /* == zero for unlink */ - jint32_t mctime; - __u8 nsize; - __u8 type; - __u8 unused[2]; - jint32_t node_crc; - jint32_t name_crc; - __u8 name[0]; -}; - -/* The JFFS2 raw inode structure: Used for storage on physical media. */ -/* The uid, gid, atime, mtime and ctime members could be longer, but - are left like this for space efficiency. If and when people decide - they really need them extended, it's simple enough to add support for - a new type of raw node. -*/ -struct jffs2_raw_inode -{ - jint16_t magic; /* A constant magic number. */ - jint16_t nodetype; /* == JFFS2_NODETYPE_INODE */ - jint32_t totlen; /* Total length of this node (inc data, etc.) */ - jint32_t hdr_crc; - jint32_t ino; /* Inode number. */ - jint32_t version; /* Version number. */ - jmode_t mode; /* The file's type or mode. */ - jint16_t uid; /* The file's owner. */ - jint16_t gid; /* The file's group. */ - jint32_t isize; /* Total resultant size of this inode (used for truncations) */ - jint32_t atime; /* Last access time. */ - jint32_t mtime; /* Last modification time. */ - jint32_t ctime; /* Change time. */ - jint32_t offset; /* Where to begin to write. */ - jint32_t csize; /* (Compressed) data size */ - jint32_t dsize; /* Size of the node's data. (after decompression) */ - __u8 compr; /* Compression algorithm used */ - __u8 usercompr; /* Compression algorithm requested by the user */ - jint16_t flags; /* See JFFS2_INO_FLAG_* */ - jint32_t data_crc; /* CRC for the (compressed) data. */ - jint32_t node_crc; /* CRC for the raw inode (excluding data) */ - __u8 data[0]; -}; - -struct jffs2_raw_xattr { - jint16_t magic; - jint16_t nodetype; /* = JFFS2_NODETYPE_XATTR */ - jint32_t totlen; - jint32_t hdr_crc; - jint32_t xid; /* XATTR identifier number */ - jint32_t version; - __u8 xprefix; - __u8 name_len; - jint16_t value_len; - jint32_t data_crc; - jint32_t node_crc; - __u8 data[0]; -} __attribute__((packed)); - -struct jffs2_raw_xref -{ - jint16_t magic; - jint16_t nodetype; /* = JFFS2_NODETYPE_XREF */ - jint32_t totlen; - jint32_t hdr_crc; - jint32_t ino; /* inode number */ - jint32_t xid; /* XATTR identifier number */ - jint32_t xseqno; /* xref sequential number */ - jint32_t node_crc; -} __attribute__((packed)); - -struct jffs2_raw_summary -{ - jint16_t magic; - jint16_t nodetype; /* = JFFS2_NODETYPE_SUMMARY */ - jint32_t totlen; - jint32_t hdr_crc; - jint32_t sum_num; /* number of sum entries*/ - jint32_t cln_mkr; /* clean marker size, 0 = no cleanmarker */ - jint32_t padded; /* sum of the size of padding nodes */ - jint32_t sum_crc; /* summary information crc */ - jint32_t node_crc; /* node crc */ - jint32_t sum[0]; /* inode summary info */ -}; - -union jffs2_node_union -{ - struct jffs2_raw_inode i; - struct jffs2_raw_dirent d; - struct jffs2_raw_xattr x; - struct jffs2_raw_xref r; - struct jffs2_raw_summary s; - struct jffs2_unknown_node u; -}; - -/* Data payload for device nodes. */ -union jffs2_device_node { - jint16_t old_id; - jint32_t new_id; -}; - -#endif /* __LINUX_JFFS2_H__ */ diff --git a/include/linux/joystick.h b/include/linux/joystick.h index 47199b13e0eb..cbf2aa9e93b9 100644 --- a/include/linux/joystick.h +++ b/include/linux/joystick.h @@ -1,12 +1,8 @@ -#ifndef _LINUX_JOYSTICK_H -#define _LINUX_JOYSTICK_H - /* * Copyright (C) 1996-2000 Vojtech Pavlik * * Sponsored by SuSE */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,113 +22,11 @@ * e-mail - mail your message to , or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#ifndef _LINUX_JOYSTICK_H +#define _LINUX_JOYSTICK_H -#include -#include - -/* - * Version - */ - -#define JS_VERSION 0x020100 - -/* - * Types and constants for reading from /dev/js - */ - -#define JS_EVENT_BUTTON 0x01 /* button pressed/released */ -#define JS_EVENT_AXIS 0x02 /* joystick moved */ -#define JS_EVENT_INIT 0x80 /* initial state of device */ - -struct js_event { - __u32 time; /* event timestamp in milliseconds */ - __s16 value; /* value */ - __u8 type; /* event type */ - __u8 number; /* axis/button number */ -}; - -/* - * IOCTL commands for joystick driver - */ - -#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */ - -#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */ -#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */ -#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */ - -#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */ -#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */ - -#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */ -#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */ -#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */ -#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */ - -/* - * Types and constants for get/set correction - */ - -#define JS_CORR_NONE 0x00 /* returns raw values */ -#define JS_CORR_BROKEN 0x01 /* broken line */ - -struct js_corr { - __s32 coef[8]; - __s16 prec; - __u16 type; -}; - -/* - * v0.x compatibility definitions - */ - -#define JS_RETURN sizeof(struct JS_DATA_TYPE) -#define JS_TRUE 1 -#define JS_FALSE 0 -#define JS_X_0 0x01 -#define JS_Y_0 0x02 -#define JS_X_1 0x04 -#define JS_Y_1 0x08 -#define JS_MAX 2 - -#define JS_DEF_TIMEOUT 0x1300 -#define JS_DEF_CORR 0 -#define JS_DEF_TIMELIMIT 10L - -#define JS_SET_CAL 1 -#define JS_GET_CAL 2 -#define JS_SET_TIMEOUT 3 -#define JS_GET_TIMEOUT 4 -#define JS_SET_TIMELIMIT 5 -#define JS_GET_TIMELIMIT 6 -#define JS_GET_ALL 7 -#define JS_SET_ALL 8 - -struct JS_DATA_TYPE { - __s32 buttons; - __s32 x; - __s32 y; -}; - -struct JS_DATA_SAVE_TYPE_32 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s32 JS_EXPIRETIME; - __s32 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; - -struct JS_DATA_SAVE_TYPE_64 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s64 JS_EXPIRETIME; - __s64 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; +#include -#ifdef __KERNEL__ #if BITS_PER_LONG == 64 #define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64 #elif BITS_PER_LONG == 32 @@ -140,6 +34,4 @@ struct JS_DATA_SAVE_TYPE_64 { #else #error Unexpected BITS_PER_LONG #endif -#endif - #endif /* _LINUX_JOYSTICK_H */ diff --git a/include/linux/kd.h b/include/linux/kd.h index c36d8476db55..25bd17fad239 100644 --- a/include/linux/kd.h +++ b/include/linux/kd.h @@ -1,186 +1,7 @@ #ifndef _LINUX_KD_H #define _LINUX_KD_H -#include -#include -/* 0x4B is 'K', to avoid collision with termios and vt */ +#include -#define GIO_FONT 0x4B60 /* gets font in expanded form */ -#define PIO_FONT 0x4B61 /* use font in expanded form */ - -#define GIO_FONTX 0x4B6B /* get font using struct consolefontdesc */ -#define PIO_FONTX 0x4B6C /* set font using struct consolefontdesc */ -struct consolefontdesc { - unsigned short charcount; /* characters in font (256 or 512) */ - unsigned short charheight; /* scan lines per character (1-32) */ - char __user *chardata; /* font data in expanded form */ -}; - -#define PIO_FONTRESET 0x4B6D /* reset to default font */ - -#define GIO_CMAP 0x4B70 /* gets colour palette on VGA+ */ -#define PIO_CMAP 0x4B71 /* sets colour palette on VGA+ */ - -#define KIOCSOUND 0x4B2F /* start sound generation (0 for off) */ -#define KDMKTONE 0x4B30 /* generate tone */ - -#define KDGETLED 0x4B31 /* return current led state */ -#define KDSETLED 0x4B32 /* set led state [lights, not flags] */ -#define LED_SCR 0x01 /* scroll lock led */ -#define LED_NUM 0x02 /* num lock led */ -#define LED_CAP 0x04 /* caps lock led */ - -#define KDGKBTYPE 0x4B33 /* get keyboard type */ -#define KB_84 0x01 -#define KB_101 0x02 /* this is what we always answer */ -#define KB_OTHER 0x03 - -#define KDADDIO 0x4B34 /* add i/o port as valid */ -#define KDDELIO 0x4B35 /* del i/o port as valid */ -#define KDENABIO 0x4B36 /* enable i/o to video board */ -#define KDDISABIO 0x4B37 /* disable i/o to video board */ - -#define KDSETMODE 0x4B3A /* set text/graphics mode */ -#define KD_TEXT 0x00 -#define KD_GRAPHICS 0x01 -#define KD_TEXT0 0x02 /* obsolete */ -#define KD_TEXT1 0x03 /* obsolete */ -#define KDGETMODE 0x4B3B /* get current mode */ - -#define KDMAPDISP 0x4B3C /* map display into address space */ -#define KDUNMAPDISP 0x4B3D /* unmap display from address space */ - -typedef char scrnmap_t; -#define E_TABSZ 256 -#define GIO_SCRNMAP 0x4B40 /* get screen mapping from kernel */ -#define PIO_SCRNMAP 0x4B41 /* put screen mapping table in kernel */ -#define GIO_UNISCRNMAP 0x4B69 /* get full Unicode screen mapping */ -#define PIO_UNISCRNMAP 0x4B6A /* set full Unicode screen mapping */ - -#define GIO_UNIMAP 0x4B66 /* get unicode-to-font mapping from kernel */ -struct unipair { - unsigned short unicode; - unsigned short fontpos; -}; -struct unimapdesc { - unsigned short entry_ct; - struct unipair __user *entries; -}; -#define PIO_UNIMAP 0x4B67 /* put unicode-to-font mapping in kernel */ -#define PIO_UNIMAPCLR 0x4B68 /* clear table, possibly advise hash algorithm */ -struct unimapinit { - unsigned short advised_hashsize; /* 0 if no opinion */ - unsigned short advised_hashstep; /* 0 if no opinion */ - unsigned short advised_hashlevel; /* 0 if no opinion */ -}; - -#define UNI_DIRECT_BASE 0xF000 /* start of Direct Font Region */ -#define UNI_DIRECT_MASK 0x01FF /* Direct Font Region bitmask */ - -#define K_RAW 0x00 -#define K_XLATE 0x01 -#define K_MEDIUMRAW 0x02 -#define K_UNICODE 0x03 -#define K_OFF 0x04 -#define KDGKBMODE 0x4B44 /* gets current keyboard mode */ -#define KDSKBMODE 0x4B45 /* sets current keyboard mode */ - -#define K_METABIT 0x03 -#define K_ESCPREFIX 0x04 -#define KDGKBMETA 0x4B62 /* gets meta key handling mode */ -#define KDSKBMETA 0x4B63 /* sets meta key handling mode */ - -#define K_SCROLLLOCK 0x01 -#define K_NUMLOCK 0x02 -#define K_CAPSLOCK 0x04 -#define KDGKBLED 0x4B64 /* get led flags (not lights) */ -#define KDSKBLED 0x4B65 /* set led flags (not lights) */ - -struct kbentry { - unsigned char kb_table; - unsigned char kb_index; - unsigned short kb_value; -}; -#define K_NORMTAB 0x00 -#define K_SHIFTTAB 0x01 -#define K_ALTTAB 0x02 -#define K_ALTSHIFTTAB 0x03 - -#define KDGKBENT 0x4B46 /* gets one entry in translation table */ -#define KDSKBENT 0x4B47 /* sets one entry in translation table */ - -struct kbsentry { - unsigned char kb_func; - unsigned char kb_string[512]; -}; -#define KDGKBSENT 0x4B48 /* gets one function key string entry */ -#define KDSKBSENT 0x4B49 /* sets one function key string entry */ - -struct kbdiacr { - unsigned char diacr, base, result; -}; -struct kbdiacrs { - unsigned int kb_cnt; /* number of entries in following array */ - struct kbdiacr kbdiacr[256]; /* MAX_DIACR from keyboard.h */ -}; -#define KDGKBDIACR 0x4B4A /* read kernel accent table */ -#define KDSKBDIACR 0x4B4B /* write kernel accent table */ - -struct kbdiacruc { - unsigned int diacr, base, result; -}; -struct kbdiacrsuc { - unsigned int kb_cnt; /* number of entries in following array */ - struct kbdiacruc kbdiacruc[256]; /* MAX_DIACR from keyboard.h */ -}; -#define KDGKBDIACRUC 0x4BFA /* read kernel accent table - UCS */ -#define KDSKBDIACRUC 0x4BFB /* write kernel accent table - UCS */ - -struct kbkeycode { - unsigned int scancode, keycode; -}; -#define KDGETKEYCODE 0x4B4C /* read kernel keycode table entry */ -#define KDSETKEYCODE 0x4B4D /* write kernel keycode table entry */ - -#define KDSIGACCEPT 0x4B4E /* accept kbd generated signals */ - -struct kbd_repeat { - int delay; /* in msec; <= 0: don't change */ - int period; /* in msec; <= 0: don't change */ - /* earlier this field was misnamed "rate" */ -}; - -#define KDKBDREP 0x4B52 /* set keyboard delay/repeat rate; - * actually used values are returned */ - -#define KDFONTOP 0x4B72 /* font operations */ - -struct console_font_op { - unsigned int op; /* operation code KD_FONT_OP_* */ - unsigned int flags; /* KD_FONT_FLAG_* */ - unsigned int width, height; /* font size */ - unsigned int charcount; - unsigned char __user *data; /* font data with height fixed to 32 */ -}; - -struct console_font { - unsigned int width, height; /* font size */ - unsigned int charcount; - unsigned char *data; /* font data with height fixed to 32 */ -}; - -#define KD_FONT_OP_SET 0 /* Set font */ -#define KD_FONT_OP_GET 1 /* Get font */ -#define KD_FONT_OP_SET_DEFAULT 2 /* Set font to default, data points to name / NULL */ -#define KD_FONT_OP_COPY 3 /* Copy from another console */ - -#define KD_FONT_FLAG_DONT_RECALC 1 /* Don't recalculate hw charcell size [compat] */ -#ifdef __KERNEL__ #define KD_FONT_FLAG_OLD 0x80000000 /* Invoked via old interface [compat] */ -#endif - -/* note: 0x4B00-0x4B4E all have had a value at some time; - don't reuse for the time being */ -/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */ - #endif /* _LINUX_KD_H */ diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h index 2dacab8beccb..c838abe3ee0a 100644 --- a/include/linux/kdev_t.h +++ b/include/linux/kdev_t.h @@ -1,6 +1,8 @@ #ifndef _LINUX_KDEV_T_H #define _LINUX_KDEV_T_H -#ifdef __KERNEL__ + +#include + #define MINORBITS 20 #define MINORMASK ((1U << MINORBITS) - 1) @@ -87,14 +89,4 @@ static inline unsigned sysv_minor(u32 dev) return dev & 0x3ffff; } -#else /* __KERNEL__ */ - -/* -Some programs want their definitions of MAJOR and MINOR and MKDEV -from the kernel sources. These must be the externally visible ones. -*/ -#define MAJOR(dev) ((dev)>>8) -#define MINOR(dev) ((dev) & 0xff) -#define MKDEV(ma,mi) ((ma)<<8 | (mi)) -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h index a1bdf6966357..546eb6a76934 100644 --- a/include/linux/kernel-page-flags.h +++ b/include/linux/kernel-page-flags.h @@ -1,38 +1,8 @@ #ifndef LINUX_KERNEL_PAGE_FLAGS_H #define LINUX_KERNEL_PAGE_FLAGS_H -/* - * Stable page flag bits exported to user space - */ - -#define KPF_LOCKED 0 -#define KPF_ERROR 1 -#define KPF_REFERENCED 2 -#define KPF_UPTODATE 3 -#define KPF_DIRTY 4 -#define KPF_LRU 5 -#define KPF_ACTIVE 6 -#define KPF_SLAB 7 -#define KPF_WRITEBACK 8 -#define KPF_RECLAIM 9 -#define KPF_BUDDY 10 - -/* 11-20: new additions in 2.6.31 */ -#define KPF_MMAP 11 -#define KPF_ANON 12 -#define KPF_SWAPCACHE 13 -#define KPF_SWAPBACKED 14 -#define KPF_COMPOUND_HEAD 15 -#define KPF_COMPOUND_TAIL 16 -#define KPF_HUGE 17 -#define KPF_UNEVICTABLE 18 -#define KPF_HWPOISON 19 -#define KPF_NOPAGE 20 +#include -#define KPF_KSM 21 -#define KPF_THP 22 - -#ifdef __KERNEL__ /* kernel hacking assistances * WARNING: subject to change, never rely on them! @@ -46,6 +16,4 @@ #define KPF_ARCH 38 #define KPF_UNCACHED 39 -#endif /* __KERNEL__ */ - #endif /* LINUX_KERNEL_PAGE_FLAGS_H */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 2451f1f7a1d9..a123b13b70fd 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -1,15 +1,6 @@ #ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H -#include - -/* - * 'kernel.h' contains some often-used function prototypes etc - */ -#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) -#define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) - -#ifdef __KERNEL__ #include #include @@ -22,6 +13,7 @@ #include #include #include +#include #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) @@ -716,6 +708,4 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } extern int do_sysinfo(struct sysinfo *info); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h index 9c2683929fd3..9be37da93680 100644 --- a/include/linux/kernelcapi.h +++ b/include/linux/kernelcapi.h @@ -6,49 +6,15 @@ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de) * */ - #ifndef __KERNELCAPI_H__ #define __KERNELCAPI_H__ -#define CAPI_MAXAPPL 240 /* maximum number of applications */ -#define CAPI_MAXCONTR 32 /* maximum number of controller */ -#define CAPI_MAXDATAWINDOW 8 - - -typedef struct kcapi_flagdef { - int contr; - int flag; -} kcapi_flagdef; - -typedef struct kcapi_carddef { - char driver[32]; - unsigned int port; - unsigned irq; - unsigned int membase; - int cardnr; -} kcapi_carddef; - -/* new ioctls >= 10 */ -#define KCAPI_CMD_TRACE 10 -#define KCAPI_CMD_ADDCARD 11 /* OBSOLETE */ - -/* - * flag > 2 => trace also data - * flag & 1 => show trace - */ -#define KCAPI_TRACE_OFF 0 -#define KCAPI_TRACE_SHORT_NO_DATA 1 -#define KCAPI_TRACE_FULL_NO_DATA 2 -#define KCAPI_TRACE_SHORT 3 -#define KCAPI_TRACE_FULL 4 - - -#ifdef __KERNEL__ #include #include #include #include +#include struct capi20_appl { u16 applid; @@ -150,6 +116,4 @@ typedef enum { CapiCallGivenToOtherApplication = 0x3304, } CAPI_REASON; -#endif /* __KERNEL__ */ - #endif /* __KERNELCAPI_H__ */ diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 37c5f7261142..d0b8458a703a 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -1,57 +1,8 @@ #ifndef LINUX_KEXEC_H #define LINUX_KEXEC_H -/* kexec system call - It loads the new kernel to boot into. - * kexec does not sync, or unmount filesystems so if you need - * that to happen you need to do that yourself. - */ - -#include - -/* kexec flags for different usage scenarios */ -#define KEXEC_ON_CRASH 0x00000001 -#define KEXEC_PRESERVE_CONTEXT 0x00000002 -#define KEXEC_ARCH_MASK 0xffff0000 - -/* These values match the ELF architecture values. - * Unless there is a good reason that should continue to be the case. - */ -#define KEXEC_ARCH_DEFAULT ( 0 << 16) -#define KEXEC_ARCH_386 ( 3 << 16) -#define KEXEC_ARCH_X86_64 (62 << 16) -#define KEXEC_ARCH_PPC (20 << 16) -#define KEXEC_ARCH_PPC64 (21 << 16) -#define KEXEC_ARCH_IA_64 (50 << 16) -#define KEXEC_ARCH_ARM (40 << 16) -#define KEXEC_ARCH_S390 (22 << 16) -#define KEXEC_ARCH_SH (42 << 16) -#define KEXEC_ARCH_MIPS_LE (10 << 16) -#define KEXEC_ARCH_MIPS ( 8 << 16) - -/* The artificial cap on the number of segments passed to kexec_load. */ -#define KEXEC_SEGMENT_MAX 16 - -#ifndef __KERNEL__ -/* - * This structure is used to hold the arguments that are used when - * loading kernel binaries. - */ -struct kexec_segment { - const void *buf; - size_t bufsz; - const void *mem; - size_t memsz; -}; - -/* Load a new kernel image as described by the kexec_segment array - * consisting of passed number of segments at the entry-point address. - * The flags allow different useage types. - */ -extern int kexec_load(void *, size_t, struct kexec_segment *, - unsigned long int); -#endif /* __KERNEL__ */ +#include -#ifdef __KERNEL__ #ifdef CONFIG_KEXEC #include #include @@ -258,5 +209,4 @@ struct task_struct; static inline void crash_kexec(struct pt_regs *regs) { } static inline int kexec_should_crash(struct task_struct *p) { return 0; } #endif /* CONFIG_KEXEC */ -#endif /* __KERNEL__ */ #endif /* LINUX_KEXEC_H */ diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h index 86e5214ae735..131ed5146521 100644 --- a/include/linux/keyboard.h +++ b/include/linux/keyboard.h @@ -1,28 +1,8 @@ #ifndef __LINUX_KEYBOARD_H #define __LINUX_KEYBOARD_H -#include +#include -#define KG_SHIFT 0 -#define KG_CTRL 2 -#define KG_ALT 3 -#define KG_ALTGR 1 -#define KG_SHIFTL 4 -#define KG_KANASHIFT 4 -#define KG_SHIFTR 5 -#define KG_CTRLL 6 -#define KG_CTRLR 7 -#define KG_CAPSSHIFT 8 - -#define NR_SHIFT 9 - -#define NR_KEYS 256 -#define MAX_NR_KEYMAPS 256 -/* This means 128Kb if all keymaps are allocated. Only the superuser - may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */ -#define MAX_NR_OF_USER_KEYMAPS 256 /* should be at least 7 */ - -#ifdef __KERNEL__ struct notifier_block; extern unsigned short *key_maps[MAX_NR_KEYMAPS]; extern unsigned short plain_map[NR_KEYS]; @@ -38,422 +18,3 @@ struct keyboard_notifier_param { extern int register_keyboard_notifier(struct notifier_block *nb); extern int unregister_keyboard_notifier(struct notifier_block *nb); #endif - -#define MAX_NR_FUNC 256 /* max nr of strings assigned to keys */ - -#define KT_LATIN 0 /* we depend on this being zero */ -#define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ -#define KT_FN 1 -#define KT_SPEC 2 -#define KT_PAD 3 -#define KT_DEAD 4 -#define KT_CONS 5 -#define KT_CUR 6 -#define KT_SHIFT 7 -#define KT_META 8 -#define KT_ASCII 9 -#define KT_LOCK 10 -#define KT_SLOCK 12 -#define KT_DEAD2 13 -#define KT_BRL 14 - -#define K(t,v) (((t)<<8)|(v)) -#define KTYP(x) ((x) >> 8) -#define KVAL(x) ((x) & 0xff) - -#define K_F1 K(KT_FN,0) -#define K_F2 K(KT_FN,1) -#define K_F3 K(KT_FN,2) -#define K_F4 K(KT_FN,3) -#define K_F5 K(KT_FN,4) -#define K_F6 K(KT_FN,5) -#define K_F7 K(KT_FN,6) -#define K_F8 K(KT_FN,7) -#define K_F9 K(KT_FN,8) -#define K_F10 K(KT_FN,9) -#define K_F11 K(KT_FN,10) -#define K_F12 K(KT_FN,11) -#define K_F13 K(KT_FN,12) -#define K_F14 K(KT_FN,13) -#define K_F15 K(KT_FN,14) -#define K_F16 K(KT_FN,15) -#define K_F17 K(KT_FN,16) -#define K_F18 K(KT_FN,17) -#define K_F19 K(KT_FN,18) -#define K_F20 K(KT_FN,19) -#define K_FIND K(KT_FN,20) -#define K_INSERT K(KT_FN,21) -#define K_REMOVE K(KT_FN,22) -#define K_SELECT K(KT_FN,23) -#define K_PGUP K(KT_FN,24) /* PGUP is a synonym for PRIOR */ -#define K_PGDN K(KT_FN,25) /* PGDN is a synonym for NEXT */ -#define K_MACRO K(KT_FN,26) -#define K_HELP K(KT_FN,27) -#define K_DO K(KT_FN,28) -#define K_PAUSE K(KT_FN,29) -#define K_F21 K(KT_FN,30) -#define K_F22 K(KT_FN,31) -#define K_F23 K(KT_FN,32) -#define K_F24 K(KT_FN,33) -#define K_F25 K(KT_FN,34) -#define K_F26 K(KT_FN,35) -#define K_F27 K(KT_FN,36) -#define K_F28 K(KT_FN,37) -#define K_F29 K(KT_FN,38) -#define K_F30 K(KT_FN,39) -#define K_F31 K(KT_FN,40) -#define K_F32 K(KT_FN,41) -#define K_F33 K(KT_FN,42) -#define K_F34 K(KT_FN,43) -#define K_F35 K(KT_FN,44) -#define K_F36 K(KT_FN,45) -#define K_F37 K(KT_FN,46) -#define K_F38 K(KT_FN,47) -#define K_F39 K(KT_FN,48) -#define K_F40 K(KT_FN,49) -#define K_F41 K(KT_FN,50) -#define K_F42 K(KT_FN,51) -#define K_F43 K(KT_FN,52) -#define K_F44 K(KT_FN,53) -#define K_F45 K(KT_FN,54) -#define K_F46 K(KT_FN,55) -#define K_F47 K(KT_FN,56) -#define K_F48 K(KT_FN,57) -#define K_F49 K(KT_FN,58) -#define K_F50 K(KT_FN,59) -#define K_F51 K(KT_FN,60) -#define K_F52 K(KT_FN,61) -#define K_F53 K(KT_FN,62) -#define K_F54 K(KT_FN,63) -#define K_F55 K(KT_FN,64) -#define K_F56 K(KT_FN,65) -#define K_F57 K(KT_FN,66) -#define K_F58 K(KT_FN,67) -#define K_F59 K(KT_FN,68) -#define K_F60 K(KT_FN,69) -#define K_F61 K(KT_FN,70) -#define K_F62 K(KT_FN,71) -#define K_F63 K(KT_FN,72) -#define K_F64 K(KT_FN,73) -#define K_F65 K(KT_FN,74) -#define K_F66 K(KT_FN,75) -#define K_F67 K(KT_FN,76) -#define K_F68 K(KT_FN,77) -#define K_F69 K(KT_FN,78) -#define K_F70 K(KT_FN,79) -#define K_F71 K(KT_FN,80) -#define K_F72 K(KT_FN,81) -#define K_F73 K(KT_FN,82) -#define K_F74 K(KT_FN,83) -#define K_F75 K(KT_FN,84) -#define K_F76 K(KT_FN,85) -#define K_F77 K(KT_FN,86) -#define K_F78 K(KT_FN,87) -#define K_F79 K(KT_FN,88) -#define K_F80 K(KT_FN,89) -#define K_F81 K(KT_FN,90) -#define K_F82 K(KT_FN,91) -#define K_F83 K(KT_FN,92) -#define K_F84 K(KT_FN,93) -#define K_F85 K(KT_FN,94) -#define K_F86 K(KT_FN,95) -#define K_F87 K(KT_FN,96) -#define K_F88 K(KT_FN,97) -#define K_F89 K(KT_FN,98) -#define K_F90 K(KT_FN,99) -#define K_F91 K(KT_FN,100) -#define K_F92 K(KT_FN,101) -#define K_F93 K(KT_FN,102) -#define K_F94 K(KT_FN,103) -#define K_F95 K(KT_FN,104) -#define K_F96 K(KT_FN,105) -#define K_F97 K(KT_FN,106) -#define K_F98 K(KT_FN,107) -#define K_F99 K(KT_FN,108) -#define K_F100 K(KT_FN,109) -#define K_F101 K(KT_FN,110) -#define K_F102 K(KT_FN,111) -#define K_F103 K(KT_FN,112) -#define K_F104 K(KT_FN,113) -#define K_F105 K(KT_FN,114) -#define K_F106 K(KT_FN,115) -#define K_F107 K(KT_FN,116) -#define K_F108 K(KT_FN,117) -#define K_F109 K(KT_FN,118) -#define K_F110 K(KT_FN,119) -#define K_F111 K(KT_FN,120) -#define K_F112 K(KT_FN,121) -#define K_F113 K(KT_FN,122) -#define K_F114 K(KT_FN,123) -#define K_F115 K(KT_FN,124) -#define K_F116 K(KT_FN,125) -#define K_F117 K(KT_FN,126) -#define K_F118 K(KT_FN,127) -#define K_F119 K(KT_FN,128) -#define K_F120 K(KT_FN,129) -#define K_F121 K(KT_FN,130) -#define K_F122 K(KT_FN,131) -#define K_F123 K(KT_FN,132) -#define K_F124 K(KT_FN,133) -#define K_F125 K(KT_FN,134) -#define K_F126 K(KT_FN,135) -#define K_F127 K(KT_FN,136) -#define K_F128 K(KT_FN,137) -#define K_F129 K(KT_FN,138) -#define K_F130 K(KT_FN,139) -#define K_F131 K(KT_FN,140) -#define K_F132 K(KT_FN,141) -#define K_F133 K(KT_FN,142) -#define K_F134 K(KT_FN,143) -#define K_F135 K(KT_FN,144) -#define K_F136 K(KT_FN,145) -#define K_F137 K(KT_FN,146) -#define K_F138 K(KT_FN,147) -#define K_F139 K(KT_FN,148) -#define K_F140 K(KT_FN,149) -#define K_F141 K(KT_FN,150) -#define K_F142 K(KT_FN,151) -#define K_F143 K(KT_FN,152) -#define K_F144 K(KT_FN,153) -#define K_F145 K(KT_FN,154) -#define K_F146 K(KT_FN,155) -#define K_F147 K(KT_FN,156) -#define K_F148 K(KT_FN,157) -#define K_F149 K(KT_FN,158) -#define K_F150 K(KT_FN,159) -#define K_F151 K(KT_FN,160) -#define K_F152 K(KT_FN,161) -#define K_F153 K(KT_FN,162) -#define K_F154 K(KT_FN,163) -#define K_F155 K(KT_FN,164) -#define K_F156 K(KT_FN,165) -#define K_F157 K(KT_FN,166) -#define K_F158 K(KT_FN,167) -#define K_F159 K(KT_FN,168) -#define K_F160 K(KT_FN,169) -#define K_F161 K(KT_FN,170) -#define K_F162 K(KT_FN,171) -#define K_F163 K(KT_FN,172) -#define K_F164 K(KT_FN,173) -#define K_F165 K(KT_FN,174) -#define K_F166 K(KT_FN,175) -#define K_F167 K(KT_FN,176) -#define K_F168 K(KT_FN,177) -#define K_F169 K(KT_FN,178) -#define K_F170 K(KT_FN,179) -#define K_F171 K(KT_FN,180) -#define K_F172 K(KT_FN,181) -#define K_F173 K(KT_FN,182) -#define K_F174 K(KT_FN,183) -#define K_F175 K(KT_FN,184) -#define K_F176 K(KT_FN,185) -#define K_F177 K(KT_FN,186) -#define K_F178 K(KT_FN,187) -#define K_F179 K(KT_FN,188) -#define K_F180 K(KT_FN,189) -#define K_F181 K(KT_FN,190) -#define K_F182 K(KT_FN,191) -#define K_F183 K(KT_FN,192) -#define K_F184 K(KT_FN,193) -#define K_F185 K(KT_FN,194) -#define K_F186 K(KT_FN,195) -#define K_F187 K(KT_FN,196) -#define K_F188 K(KT_FN,197) -#define K_F189 K(KT_FN,198) -#define K_F190 K(KT_FN,199) -#define K_F191 K(KT_FN,200) -#define K_F192 K(KT_FN,201) -#define K_F193 K(KT_FN,202) -#define K_F194 K(KT_FN,203) -#define K_F195 K(KT_FN,204) -#define K_F196 K(KT_FN,205) -#define K_F197 K(KT_FN,206) -#define K_F198 K(KT_FN,207) -#define K_F199 K(KT_FN,208) -#define K_F200 K(KT_FN,209) -#define K_F201 K(KT_FN,210) -#define K_F202 K(KT_FN,211) -#define K_F203 K(KT_FN,212) -#define K_F204 K(KT_FN,213) -#define K_F205 K(KT_FN,214) -#define K_F206 K(KT_FN,215) -#define K_F207 K(KT_FN,216) -#define K_F208 K(KT_FN,217) -#define K_F209 K(KT_FN,218) -#define K_F210 K(KT_FN,219) -#define K_F211 K(KT_FN,220) -#define K_F212 K(KT_FN,221) -#define K_F213 K(KT_FN,222) -#define K_F214 K(KT_FN,223) -#define K_F215 K(KT_FN,224) -#define K_F216 K(KT_FN,225) -#define K_F217 K(KT_FN,226) -#define K_F218 K(KT_FN,227) -#define K_F219 K(KT_FN,228) -#define K_F220 K(KT_FN,229) -#define K_F221 K(KT_FN,230) -#define K_F222 K(KT_FN,231) -#define K_F223 K(KT_FN,232) -#define K_F224 K(KT_FN,233) -#define K_F225 K(KT_FN,234) -#define K_F226 K(KT_FN,235) -#define K_F227 K(KT_FN,236) -#define K_F228 K(KT_FN,237) -#define K_F229 K(KT_FN,238) -#define K_F230 K(KT_FN,239) -#define K_F231 K(KT_FN,240) -#define K_F232 K(KT_FN,241) -#define K_F233 K(KT_FN,242) -#define K_F234 K(KT_FN,243) -#define K_F235 K(KT_FN,244) -#define K_F236 K(KT_FN,245) -#define K_F237 K(KT_FN,246) -#define K_F238 K(KT_FN,247) -#define K_F239 K(KT_FN,248) -#define K_F240 K(KT_FN,249) -#define K_F241 K(KT_FN,250) -#define K_F242 K(KT_FN,251) -#define K_F243 K(KT_FN,252) -#define K_F244 K(KT_FN,253) -#define K_F245 K(KT_FN,254) -#define K_UNDO K(KT_FN,255) - - -#define K_HOLE K(KT_SPEC,0) -#define K_ENTER K(KT_SPEC,1) -#define K_SH_REGS K(KT_SPEC,2) -#define K_SH_MEM K(KT_SPEC,3) -#define K_SH_STAT K(KT_SPEC,4) -#define K_BREAK K(KT_SPEC,5) -#define K_CONS K(KT_SPEC,6) -#define K_CAPS K(KT_SPEC,7) -#define K_NUM K(KT_SPEC,8) -#define K_HOLD K(KT_SPEC,9) -#define K_SCROLLFORW K(KT_SPEC,10) -#define K_SCROLLBACK K(KT_SPEC,11) -#define K_BOOT K(KT_SPEC,12) -#define K_CAPSON K(KT_SPEC,13) -#define K_COMPOSE K(KT_SPEC,14) -#define K_SAK K(KT_SPEC,15) -#define K_DECRCONSOLE K(KT_SPEC,16) -#define K_INCRCONSOLE K(KT_SPEC,17) -#define K_SPAWNCONSOLE K(KT_SPEC,18) -#define K_BARENUMLOCK K(KT_SPEC,19) - -#define K_ALLOCATED K(KT_SPEC,126) /* dynamically allocated keymap */ -#define K_NOSUCHMAP K(KT_SPEC,127) /* returned by KDGKBENT */ - -#define K_P0 K(KT_PAD,0) -#define K_P1 K(KT_PAD,1) -#define K_P2 K(KT_PAD,2) -#define K_P3 K(KT_PAD,3) -#define K_P4 K(KT_PAD,4) -#define K_P5 K(KT_PAD,5) -#define K_P6 K(KT_PAD,6) -#define K_P7 K(KT_PAD,7) -#define K_P8 K(KT_PAD,8) -#define K_P9 K(KT_PAD,9) -#define K_PPLUS K(KT_PAD,10) /* key-pad plus */ -#define K_PMINUS K(KT_PAD,11) /* key-pad minus */ -#define K_PSTAR K(KT_PAD,12) /* key-pad asterisk (star) */ -#define K_PSLASH K(KT_PAD,13) /* key-pad slash */ -#define K_PENTER K(KT_PAD,14) /* key-pad enter */ -#define K_PCOMMA K(KT_PAD,15) /* key-pad comma: kludge... */ -#define K_PDOT K(KT_PAD,16) /* key-pad dot (period): kludge... */ -#define K_PPLUSMINUS K(KT_PAD,17) /* key-pad plus/minus */ -#define K_PPARENL K(KT_PAD,18) /* key-pad left parenthesis */ -#define K_PPARENR K(KT_PAD,19) /* key-pad right parenthesis */ - -#define NR_PAD 20 - -#define K_DGRAVE K(KT_DEAD,0) -#define K_DACUTE K(KT_DEAD,1) -#define K_DCIRCM K(KT_DEAD,2) -#define K_DTILDE K(KT_DEAD,3) -#define K_DDIERE K(KT_DEAD,4) -#define K_DCEDIL K(KT_DEAD,5) - -#define NR_DEAD 6 - -#define K_DOWN K(KT_CUR,0) -#define K_LEFT K(KT_CUR,1) -#define K_RIGHT K(KT_CUR,2) -#define K_UP K(KT_CUR,3) - -#define K_SHIFT K(KT_SHIFT,KG_SHIFT) -#define K_CTRL K(KT_SHIFT,KG_CTRL) -#define K_ALT K(KT_SHIFT,KG_ALT) -#define K_ALTGR K(KT_SHIFT,KG_ALTGR) -#define K_SHIFTL K(KT_SHIFT,KG_SHIFTL) -#define K_SHIFTR K(KT_SHIFT,KG_SHIFTR) -#define K_CTRLL K(KT_SHIFT,KG_CTRLL) -#define K_CTRLR K(KT_SHIFT,KG_CTRLR) -#define K_CAPSSHIFT K(KT_SHIFT,KG_CAPSSHIFT) - -#define K_ASC0 K(KT_ASCII,0) -#define K_ASC1 K(KT_ASCII,1) -#define K_ASC2 K(KT_ASCII,2) -#define K_ASC3 K(KT_ASCII,3) -#define K_ASC4 K(KT_ASCII,4) -#define K_ASC5 K(KT_ASCII,5) -#define K_ASC6 K(KT_ASCII,6) -#define K_ASC7 K(KT_ASCII,7) -#define K_ASC8 K(KT_ASCII,8) -#define K_ASC9 K(KT_ASCII,9) -#define K_HEX0 K(KT_ASCII,10) -#define K_HEX1 K(KT_ASCII,11) -#define K_HEX2 K(KT_ASCII,12) -#define K_HEX3 K(KT_ASCII,13) -#define K_HEX4 K(KT_ASCII,14) -#define K_HEX5 K(KT_ASCII,15) -#define K_HEX6 K(KT_ASCII,16) -#define K_HEX7 K(KT_ASCII,17) -#define K_HEX8 K(KT_ASCII,18) -#define K_HEX9 K(KT_ASCII,19) -#define K_HEXa K(KT_ASCII,20) -#define K_HEXb K(KT_ASCII,21) -#define K_HEXc K(KT_ASCII,22) -#define K_HEXd K(KT_ASCII,23) -#define K_HEXe K(KT_ASCII,24) -#define K_HEXf K(KT_ASCII,25) - -#define NR_ASCII 26 - -#define K_SHIFTLOCK K(KT_LOCK,KG_SHIFT) -#define K_CTRLLOCK K(KT_LOCK,KG_CTRL) -#define K_ALTLOCK K(KT_LOCK,KG_ALT) -#define K_ALTGRLOCK K(KT_LOCK,KG_ALTGR) -#define K_SHIFTLLOCK K(KT_LOCK,KG_SHIFTL) -#define K_SHIFTRLOCK K(KT_LOCK,KG_SHIFTR) -#define K_CTRLLLOCK K(KT_LOCK,KG_CTRLL) -#define K_CTRLRLOCK K(KT_LOCK,KG_CTRLR) -#define K_CAPSSHIFTLOCK K(KT_LOCK,KG_CAPSSHIFT) - -#define K_SHIFT_SLOCK K(KT_SLOCK,KG_SHIFT) -#define K_CTRL_SLOCK K(KT_SLOCK,KG_CTRL) -#define K_ALT_SLOCK K(KT_SLOCK,KG_ALT) -#define K_ALTGR_SLOCK K(KT_SLOCK,KG_ALTGR) -#define K_SHIFTL_SLOCK K(KT_SLOCK,KG_SHIFTL) -#define K_SHIFTR_SLOCK K(KT_SLOCK,KG_SHIFTR) -#define K_CTRLL_SLOCK K(KT_SLOCK,KG_CTRLL) -#define K_CTRLR_SLOCK K(KT_SLOCK,KG_CTRLR) -#define K_CAPSSHIFT_SLOCK K(KT_SLOCK,KG_CAPSSHIFT) - -#define NR_LOCK 9 - -#define K_BRL_BLANK K(KT_BRL, 0) -#define K_BRL_DOT1 K(KT_BRL, 1) -#define K_BRL_DOT2 K(KT_BRL, 2) -#define K_BRL_DOT3 K(KT_BRL, 3) -#define K_BRL_DOT4 K(KT_BRL, 4) -#define K_BRL_DOT5 K(KT_BRL, 5) -#define K_BRL_DOT6 K(KT_BRL, 6) -#define K_BRL_DOT7 K(KT_BRL, 7) -#define K_BRL_DOT8 K(KT_BRL, 8) -#define K_BRL_DOT9 K(KT_BRL, 9) -#define K_BRL_DOT10 K(KT_BRL, 10) - -#define NR_BRL 11 - -#define MAX_DIACR 256 -#endif diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h deleted file mode 100644 index c9b7f4faf97a..000000000000 --- a/include/linux/keyctl.h +++ /dev/null @@ -1,60 +0,0 @@ -/* keyctl.h: keyctl command IDs - * - * Copyright (C) 2004, 2008 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _LINUX_KEYCTL_H -#define _LINUX_KEYCTL_H - -/* special process keyring shortcut IDs */ -#define KEY_SPEC_THREAD_KEYRING -1 /* - key ID for thread-specific keyring */ -#define KEY_SPEC_PROCESS_KEYRING -2 /* - key ID for process-specific keyring */ -#define KEY_SPEC_SESSION_KEYRING -3 /* - key ID for session-specific keyring */ -#define KEY_SPEC_USER_KEYRING -4 /* - key ID for UID-specific keyring */ -#define KEY_SPEC_USER_SESSION_KEYRING -5 /* - key ID for UID-session keyring */ -#define KEY_SPEC_GROUP_KEYRING -6 /* - key ID for GID-specific keyring */ -#define KEY_SPEC_REQKEY_AUTH_KEY -7 /* - key ID for assumed request_key auth key */ -#define KEY_SPEC_REQUESTOR_KEYRING -8 /* - key ID for request_key() dest keyring */ - -/* request-key default keyrings */ -#define KEY_REQKEY_DEFL_NO_CHANGE -1 -#define KEY_REQKEY_DEFL_DEFAULT 0 -#define KEY_REQKEY_DEFL_THREAD_KEYRING 1 -#define KEY_REQKEY_DEFL_PROCESS_KEYRING 2 -#define KEY_REQKEY_DEFL_SESSION_KEYRING 3 -#define KEY_REQKEY_DEFL_USER_KEYRING 4 -#define KEY_REQKEY_DEFL_USER_SESSION_KEYRING 5 -#define KEY_REQKEY_DEFL_GROUP_KEYRING 6 -#define KEY_REQKEY_DEFL_REQUESTOR_KEYRING 7 - -/* keyctl commands */ -#define KEYCTL_GET_KEYRING_ID 0 /* ask for a keyring's ID */ -#define KEYCTL_JOIN_SESSION_KEYRING 1 /* join or start named session keyring */ -#define KEYCTL_UPDATE 2 /* update a key */ -#define KEYCTL_REVOKE 3 /* revoke a key */ -#define KEYCTL_CHOWN 4 /* set ownership of a key */ -#define KEYCTL_SETPERM 5 /* set perms on a key */ -#define KEYCTL_DESCRIBE 6 /* describe a key */ -#define KEYCTL_CLEAR 7 /* clear contents of a keyring */ -#define KEYCTL_LINK 8 /* link a key into a keyring */ -#define KEYCTL_UNLINK 9 /* unlink a key from a keyring */ -#define KEYCTL_SEARCH 10 /* search for a key in a keyring */ -#define KEYCTL_READ 11 /* read a key or keyring's contents */ -#define KEYCTL_INSTANTIATE 12 /* instantiate a partially constructed key */ -#define KEYCTL_NEGATE 13 /* negate a partially constructed key */ -#define KEYCTL_SET_REQKEY_KEYRING 14 /* set default request-key keyring */ -#define KEYCTL_SET_TIMEOUT 15 /* set key timeout */ -#define KEYCTL_ASSUME_AUTHORITY 16 /* assume request_key() authorisation */ -#define KEYCTL_GET_SECURITY 17 /* get key security label */ -#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */ -#define KEYCTL_REJECT 19 /* reject a partially constructed key */ -#define KEYCTL_INSTANTIATE_IOV 20 /* instantiate a partially constructed key */ -#define KEYCTL_INVALIDATE 21 /* invalidate a key */ - -#endif /* _LINUX_KEYCTL_H */ diff --git a/include/linux/kvm.h b/include/linux/kvm.h deleted file mode 100644 index 0a6d6ba44c85..000000000000 --- a/include/linux/kvm.h +++ /dev/null @@ -1,975 +0,0 @@ -#ifndef __LINUX_KVM_H -#define __LINUX_KVM_H - -/* - * Userspace interface for /dev/kvm - kernel based virtual machine - * - * Note: you must update KVM_API_VERSION if you change this interface. - */ - -#include -#include -#include -#include - -#define KVM_API_VERSION 12 - -/* *** Deprecated interfaces *** */ - -#define KVM_TRC_SHIFT 16 - -#define KVM_TRC_ENTRYEXIT (1 << KVM_TRC_SHIFT) -#define KVM_TRC_HANDLER (1 << (KVM_TRC_SHIFT + 1)) - -#define KVM_TRC_VMENTRY (KVM_TRC_ENTRYEXIT + 0x01) -#define KVM_TRC_VMEXIT (KVM_TRC_ENTRYEXIT + 0x02) -#define KVM_TRC_PAGE_FAULT (KVM_TRC_HANDLER + 0x01) - -#define KVM_TRC_HEAD_SIZE 12 -#define KVM_TRC_CYCLE_SIZE 8 -#define KVM_TRC_EXTRA_MAX 7 - -#define KVM_TRC_INJ_VIRQ (KVM_TRC_HANDLER + 0x02) -#define KVM_TRC_REDELIVER_EVT (KVM_TRC_HANDLER + 0x03) -#define KVM_TRC_PEND_INTR (KVM_TRC_HANDLER + 0x04) -#define KVM_TRC_IO_READ (KVM_TRC_HANDLER + 0x05) -#define KVM_TRC_IO_WRITE (KVM_TRC_HANDLER + 0x06) -#define KVM_TRC_CR_READ (KVM_TRC_HANDLER + 0x07) -#define KVM_TRC_CR_WRITE (KVM_TRC_HANDLER + 0x08) -#define KVM_TRC_DR_READ (KVM_TRC_HANDLER + 0x09) -#define KVM_TRC_DR_WRITE (KVM_TRC_HANDLER + 0x0A) -#define KVM_TRC_MSR_READ (KVM_TRC_HANDLER + 0x0B) -#define KVM_TRC_MSR_WRITE (KVM_TRC_HANDLER + 0x0C) -#define KVM_TRC_CPUID (KVM_TRC_HANDLER + 0x0D) -#define KVM_TRC_INTR (KVM_TRC_HANDLER + 0x0E) -#define KVM_TRC_NMI (KVM_TRC_HANDLER + 0x0F) -#define KVM_TRC_VMMCALL (KVM_TRC_HANDLER + 0x10) -#define KVM_TRC_HLT (KVM_TRC_HANDLER + 0x11) -#define KVM_TRC_CLTS (KVM_TRC_HANDLER + 0x12) -#define KVM_TRC_LMSW (KVM_TRC_HANDLER + 0x13) -#define KVM_TRC_APIC_ACCESS (KVM_TRC_HANDLER + 0x14) -#define KVM_TRC_TDP_FAULT (KVM_TRC_HANDLER + 0x15) -#define KVM_TRC_GTLB_WRITE (KVM_TRC_HANDLER + 0x16) -#define KVM_TRC_STLB_WRITE (KVM_TRC_HANDLER + 0x17) -#define KVM_TRC_STLB_INVAL (KVM_TRC_HANDLER + 0x18) -#define KVM_TRC_PPC_INSTR (KVM_TRC_HANDLER + 0x19) - -struct kvm_user_trace_setup { - __u32 buf_size; - __u32 buf_nr; -}; - -#define __KVM_DEPRECATED_MAIN_W_0x06 \ - _IOW(KVMIO, 0x06, struct kvm_user_trace_setup) -#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07) -#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08) - -#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq) - -struct kvm_breakpoint { - __u32 enabled; - __u32 padding; - __u64 address; -}; - -struct kvm_debug_guest { - __u32 enabled; - __u32 pad; - struct kvm_breakpoint breakpoints[4]; - __u32 singlestep; -}; - -#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest) - -/* *** End of deprecated interfaces *** */ - - -/* for KVM_CREATE_MEMORY_REGION */ -struct kvm_memory_region { - __u32 slot; - __u32 flags; - __u64 guest_phys_addr; - __u64 memory_size; /* bytes */ -}; - -/* for KVM_SET_USER_MEMORY_REGION */ -struct kvm_userspace_memory_region { - __u32 slot; - __u32 flags; - __u64 guest_phys_addr; - __u64 memory_size; /* bytes */ - __u64 userspace_addr; /* start of the userspace allocated memory */ -}; - -/* - * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace, - * other bits are reserved for kvm internal use which are defined in - * include/linux/kvm_host.h. - */ -#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) -#define KVM_MEM_READONLY (1UL << 1) - -/* for KVM_IRQ_LINE */ -struct kvm_irq_level { - /* - * ACPI gsi notion of irq. - * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. - * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. - */ - union { - __u32 irq; - __s32 status; - }; - __u32 level; -}; - - -struct kvm_irqchip { - __u32 chip_id; - __u32 pad; - union { - char dummy[512]; /* reserving space */ -#ifdef __KVM_HAVE_PIT - struct kvm_pic_state pic; -#endif -#ifdef __KVM_HAVE_IOAPIC - struct kvm_ioapic_state ioapic; -#endif - } chip; -}; - -/* for KVM_CREATE_PIT2 */ -struct kvm_pit_config { - __u32 flags; - __u32 pad[15]; -}; - -#define KVM_PIT_SPEAKER_DUMMY 1 - -#define KVM_EXIT_UNKNOWN 0 -#define KVM_EXIT_EXCEPTION 1 -#define KVM_EXIT_IO 2 -#define KVM_EXIT_HYPERCALL 3 -#define KVM_EXIT_DEBUG 4 -#define KVM_EXIT_HLT 5 -#define KVM_EXIT_MMIO 6 -#define KVM_EXIT_IRQ_WINDOW_OPEN 7 -#define KVM_EXIT_SHUTDOWN 8 -#define KVM_EXIT_FAIL_ENTRY 9 -#define KVM_EXIT_INTR 10 -#define KVM_EXIT_SET_TPR 11 -#define KVM_EXIT_TPR_ACCESS 12 -#define KVM_EXIT_S390_SIEIC 13 -#define KVM_EXIT_S390_RESET 14 -#define KVM_EXIT_DCR 15 -#define KVM_EXIT_NMI 16 -#define KVM_EXIT_INTERNAL_ERROR 17 -#define KVM_EXIT_OSI 18 -#define KVM_EXIT_PAPR_HCALL 19 -#define KVM_EXIT_S390_UCONTROL 20 - -/* For KVM_EXIT_INTERNAL_ERROR */ -#define KVM_INTERNAL_ERROR_EMULATION 1 -#define KVM_INTERNAL_ERROR_SIMUL_EX 2 - -/* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ -struct kvm_run { - /* in */ - __u8 request_interrupt_window; - __u8 padding1[7]; - - /* out */ - __u32 exit_reason; - __u8 ready_for_interrupt_injection; - __u8 if_flag; - __u8 padding2[2]; - - /* in (pre_kvm_run), out (post_kvm_run) */ - __u64 cr8; - __u64 apic_base; - -#ifdef __KVM_S390 - /* the processor status word for s390 */ - __u64 psw_mask; /* psw upper half */ - __u64 psw_addr; /* psw lower half */ -#endif - union { - /* KVM_EXIT_UNKNOWN */ - struct { - __u64 hardware_exit_reason; - } hw; - /* KVM_EXIT_FAIL_ENTRY */ - struct { - __u64 hardware_entry_failure_reason; - } fail_entry; - /* KVM_EXIT_EXCEPTION */ - struct { - __u32 exception; - __u32 error_code; - } ex; - /* KVM_EXIT_IO */ - struct { -#define KVM_EXIT_IO_IN 0 -#define KVM_EXIT_IO_OUT 1 - __u8 direction; - __u8 size; /* bytes */ - __u16 port; - __u32 count; - __u64 data_offset; /* relative to kvm_run start */ - } io; - struct { - struct kvm_debug_exit_arch arch; - } debug; - /* KVM_EXIT_MMIO */ - struct { - __u64 phys_addr; - __u8 data[8]; - __u32 len; - __u8 is_write; - } mmio; - /* KVM_EXIT_HYPERCALL */ - struct { - __u64 nr; - __u64 args[6]; - __u64 ret; - __u32 longmode; - __u32 pad; - } hypercall; - /* KVM_EXIT_TPR_ACCESS */ - struct { - __u64 rip; - __u32 is_write; - __u32 pad; - } tpr_access; - /* KVM_EXIT_S390_SIEIC */ - struct { - __u8 icptcode; - __u16 ipa; - __u32 ipb; - } s390_sieic; - /* KVM_EXIT_S390_RESET */ -#define KVM_S390_RESET_POR 1 -#define KVM_S390_RESET_CLEAR 2 -#define KVM_S390_RESET_SUBSYSTEM 4 -#define KVM_S390_RESET_CPU_INIT 8 -#define KVM_S390_RESET_IPL 16 - __u64 s390_reset_flags; - /* KVM_EXIT_S390_UCONTROL */ - struct { - __u64 trans_exc_code; - __u32 pgm_code; - } s390_ucontrol; - /* KVM_EXIT_DCR */ - struct { - __u32 dcrn; - __u32 data; - __u8 is_write; - } dcr; - struct { - __u32 suberror; - /* Available with KVM_CAP_INTERNAL_ERROR_DATA: */ - __u32 ndata; - __u64 data[16]; - } internal; - /* KVM_EXIT_OSI */ - struct { - __u64 gprs[32]; - } osi; - struct { - __u64 nr; - __u64 ret; - __u64 args[9]; - } papr_hcall; - /* Fix the size of the union. */ - char padding[256]; - }; - - /* - * shared registers between kvm and userspace. - * kvm_valid_regs specifies the register classes set by the host - * kvm_dirty_regs specified the register classes dirtied by userspace - * struct kvm_sync_regs is architecture specific, as well as the - * bits for kvm_valid_regs and kvm_dirty_regs - */ - __u64 kvm_valid_regs; - __u64 kvm_dirty_regs; - union { - struct kvm_sync_regs regs; - char padding[1024]; - } s; -}; - -/* for KVM_REGISTER_COALESCED_MMIO / KVM_UNREGISTER_COALESCED_MMIO */ - -struct kvm_coalesced_mmio_zone { - __u64 addr; - __u32 size; - __u32 pad; -}; - -struct kvm_coalesced_mmio { - __u64 phys_addr; - __u32 len; - __u32 pad; - __u8 data[8]; -}; - -struct kvm_coalesced_mmio_ring { - __u32 first, last; - struct kvm_coalesced_mmio coalesced_mmio[0]; -}; - -#define KVM_COALESCED_MMIO_MAX \ - ((PAGE_SIZE - sizeof(struct kvm_coalesced_mmio_ring)) / \ - sizeof(struct kvm_coalesced_mmio)) - -/* for KVM_TRANSLATE */ -struct kvm_translation { - /* in */ - __u64 linear_address; - - /* out */ - __u64 physical_address; - __u8 valid; - __u8 writeable; - __u8 usermode; - __u8 pad[5]; -}; - -/* for KVM_INTERRUPT */ -struct kvm_interrupt { - /* in */ - __u32 irq; -}; - -/* for KVM_GET_DIRTY_LOG */ -struct kvm_dirty_log { - __u32 slot; - __u32 padding1; - union { - void __user *dirty_bitmap; /* one bit per page */ - __u64 padding2; - }; -}; - -/* for KVM_SET_SIGNAL_MASK */ -struct kvm_signal_mask { - __u32 len; - __u8 sigset[0]; -}; - -/* for KVM_TPR_ACCESS_REPORTING */ -struct kvm_tpr_access_ctl { - __u32 enabled; - __u32 flags; - __u32 reserved[8]; -}; - -/* for KVM_SET_VAPIC_ADDR */ -struct kvm_vapic_addr { - __u64 vapic_addr; -}; - -/* for KVM_SET_MPSTATE */ - -#define KVM_MP_STATE_RUNNABLE 0 -#define KVM_MP_STATE_UNINITIALIZED 1 -#define KVM_MP_STATE_INIT_RECEIVED 2 -#define KVM_MP_STATE_HALTED 3 -#define KVM_MP_STATE_SIPI_RECEIVED 4 - -struct kvm_mp_state { - __u32 mp_state; -}; - -struct kvm_s390_psw { - __u64 mask; - __u64 addr; -}; - -/* valid values for type in kvm_s390_interrupt */ -#define KVM_S390_SIGP_STOP 0xfffe0000u -#define KVM_S390_PROGRAM_INT 0xfffe0001u -#define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u -#define KVM_S390_RESTART 0xfffe0003u -#define KVM_S390_INT_VIRTIO 0xffff2603u -#define KVM_S390_INT_SERVICE 0xffff2401u -#define KVM_S390_INT_EMERGENCY 0xffff1201u -#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u - -struct kvm_s390_interrupt { - __u32 type; - __u32 parm; - __u64 parm64; -}; - -/* for KVM_SET_GUEST_DEBUG */ - -#define KVM_GUESTDBG_ENABLE 0x00000001 -#define KVM_GUESTDBG_SINGLESTEP 0x00000002 - -struct kvm_guest_debug { - __u32 control; - __u32 pad; - struct kvm_guest_debug_arch arch; -}; - -enum { - kvm_ioeventfd_flag_nr_datamatch, - kvm_ioeventfd_flag_nr_pio, - kvm_ioeventfd_flag_nr_deassign, - kvm_ioeventfd_flag_nr_max, -}; - -#define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) -#define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) -#define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) - -#define KVM_IOEVENTFD_VALID_FLAG_MASK ((1 << kvm_ioeventfd_flag_nr_max) - 1) - -struct kvm_ioeventfd { - __u64 datamatch; - __u64 addr; /* legal pio/mmio address */ - __u32 len; /* 1, 2, 4, or 8 bytes */ - __s32 fd; - __u32 flags; - __u8 pad[36]; -}; - -/* for KVM_ENABLE_CAP */ -struct kvm_enable_cap { - /* in */ - __u32 cap; - __u32 flags; - __u64 args[4]; - __u8 pad[64]; -}; - -/* for KVM_PPC_GET_PVINFO */ -struct kvm_ppc_pvinfo { - /* out */ - __u32 flags; - __u32 hcall[4]; - __u8 pad[108]; -}; - -/* for KVM_PPC_GET_SMMU_INFO */ -#define KVM_PPC_PAGE_SIZES_MAX_SZ 8 - -struct kvm_ppc_one_page_size { - __u32 page_shift; /* Page shift (or 0) */ - __u32 pte_enc; /* Encoding in the HPTE (>>12) */ -}; - -struct kvm_ppc_one_seg_page_size { - __u32 page_shift; /* Base page shift of segment (or 0) */ - __u32 slb_enc; /* SLB encoding for BookS */ - struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; -}; - -#define KVM_PPC_PAGE_SIZES_REAL 0x00000001 -#define KVM_PPC_1T_SEGMENTS 0x00000002 - -struct kvm_ppc_smmu_info { - __u64 flags; - __u32 slb_size; - __u32 pad; - struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; -}; - -#define KVMIO 0xAE - -/* machine type bits, to be used as argument to KVM_CREATE_VM */ -#define KVM_VM_S390_UCONTROL 1 - -#define KVM_S390_SIE_PAGE_OFFSET 1 - -/* - * ioctls for /dev/kvm fds: - */ -#define KVM_GET_API_VERSION _IO(KVMIO, 0x00) -#define KVM_CREATE_VM _IO(KVMIO, 0x01) /* returns a VM fd */ -#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 0x02, struct kvm_msr_list) - -#define KVM_S390_ENABLE_SIE _IO(KVMIO, 0x06) -/* - * Check if a kvm extension is available. Argument is extension number, - * return is 1 (yes) or 0 (no, sorry). - */ -#define KVM_CHECK_EXTENSION _IO(KVMIO, 0x03) -/* - * Get size for mmap(vcpu_fd) - */ -#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */ -#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2) -#define KVM_TRACE_ENABLE __KVM_DEPRECATED_MAIN_W_0x06 -#define KVM_TRACE_PAUSE __KVM_DEPRECATED_MAIN_0x07 -#define KVM_TRACE_DISABLE __KVM_DEPRECATED_MAIN_0x08 - -/* - * Extension capability list. - */ -#define KVM_CAP_IRQCHIP 0 -#define KVM_CAP_HLT 1 -#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2 -#define KVM_CAP_USER_MEMORY 3 -#define KVM_CAP_SET_TSS_ADDR 4 -#define KVM_CAP_VAPIC 6 -#define KVM_CAP_EXT_CPUID 7 -#define KVM_CAP_CLOCKSOURCE 8 -#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */ -#define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */ -#define KVM_CAP_PIT 11 -#define KVM_CAP_NOP_IO_DELAY 12 -#define KVM_CAP_PV_MMU 13 -#define KVM_CAP_MP_STATE 14 -#define KVM_CAP_COALESCED_MMIO 15 -#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT -#define KVM_CAP_DEVICE_ASSIGNMENT 17 -#endif -#define KVM_CAP_IOMMU 18 -#ifdef __KVM_HAVE_MSI -#define KVM_CAP_DEVICE_MSI 20 -#endif -/* Bug in KVM_SET_USER_MEMORY_REGION fixed: */ -#define KVM_CAP_DESTROY_MEMORY_REGION_WORKS 21 -#ifdef __KVM_HAVE_USER_NMI -#define KVM_CAP_USER_NMI 22 -#endif -#ifdef __KVM_HAVE_GUEST_DEBUG -#define KVM_CAP_SET_GUEST_DEBUG 23 -#endif -#ifdef __KVM_HAVE_PIT -#define KVM_CAP_REINJECT_CONTROL 24 -#endif -#ifdef __KVM_HAVE_IOAPIC -#define KVM_CAP_IRQ_ROUTING 25 -#endif -#define KVM_CAP_IRQ_INJECT_STATUS 26 -#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT -#define KVM_CAP_DEVICE_DEASSIGNMENT 27 -#endif -#ifdef __KVM_HAVE_MSIX -#define KVM_CAP_DEVICE_MSIX 28 -#endif -#define KVM_CAP_ASSIGN_DEV_IRQ 29 -/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ -#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 -#ifdef __KVM_HAVE_MCE -#define KVM_CAP_MCE 31 -#endif -#define KVM_CAP_IRQFD 32 -#ifdef __KVM_HAVE_PIT -#define KVM_CAP_PIT2 33 -#endif -#define KVM_CAP_SET_BOOT_CPU_ID 34 -#ifdef __KVM_HAVE_PIT_STATE2 -#define KVM_CAP_PIT_STATE2 35 -#endif -#define KVM_CAP_IOEVENTFD 36 -#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37 -#ifdef __KVM_HAVE_XEN_HVM -#define KVM_CAP_XEN_HVM 38 -#endif -#define KVM_CAP_ADJUST_CLOCK 39 -#define KVM_CAP_INTERNAL_ERROR_DATA 40 -#ifdef __KVM_HAVE_VCPU_EVENTS -#define KVM_CAP_VCPU_EVENTS 41 -#endif -#define KVM_CAP_S390_PSW 42 -#define KVM_CAP_PPC_SEGSTATE 43 -#define KVM_CAP_HYPERV 44 -#define KVM_CAP_HYPERV_VAPIC 45 -#define KVM_CAP_HYPERV_SPIN 46 -#define KVM_CAP_PCI_SEGMENT 47 -#define KVM_CAP_PPC_PAIRED_SINGLES 48 -#define KVM_CAP_INTR_SHADOW 49 -#ifdef __KVM_HAVE_DEBUGREGS -#define KVM_CAP_DEBUGREGS 50 -#endif -#define KVM_CAP_X86_ROBUST_SINGLESTEP 51 -#define KVM_CAP_PPC_OSI 52 -#define KVM_CAP_PPC_UNSET_IRQ 53 -#define KVM_CAP_ENABLE_CAP 54 -#ifdef __KVM_HAVE_XSAVE -#define KVM_CAP_XSAVE 55 -#endif -#ifdef __KVM_HAVE_XCRS -#define KVM_CAP_XCRS 56 -#endif -#define KVM_CAP_PPC_GET_PVINFO 57 -#define KVM_CAP_PPC_IRQ_LEVEL 58 -#define KVM_CAP_ASYNC_PF 59 -#define KVM_CAP_TSC_CONTROL 60 -#define KVM_CAP_GET_TSC_KHZ 61 -#define KVM_CAP_PPC_BOOKE_SREGS 62 -#define KVM_CAP_SPAPR_TCE 63 -#define KVM_CAP_PPC_SMT 64 -#define KVM_CAP_PPC_RMA 65 -#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ -#define KVM_CAP_PPC_HIOR 67 -#define KVM_CAP_PPC_PAPR 68 -#define KVM_CAP_SW_TLB 69 -#define KVM_CAP_ONE_REG 70 -#define KVM_CAP_S390_GMAP 71 -#define KVM_CAP_TSC_DEADLINE_TIMER 72 -#define KVM_CAP_S390_UCONTROL 73 -#define KVM_CAP_SYNC_REGS 74 -#define KVM_CAP_PCI_2_3 75 -#define KVM_CAP_KVMCLOCK_CTRL 76 -#define KVM_CAP_SIGNAL_MSI 77 -#define KVM_CAP_PPC_GET_SMMU_INFO 78 -#define KVM_CAP_S390_COW 79 -#define KVM_CAP_PPC_ALLOC_HTAB 80 -#ifdef __KVM_HAVE_READONLY_MEM -#define KVM_CAP_READONLY_MEM 81 -#endif -#define KVM_CAP_IRQFD_RESAMPLE 82 - -#ifdef KVM_CAP_IRQ_ROUTING - -struct kvm_irq_routing_irqchip { - __u32 irqchip; - __u32 pin; -}; - -struct kvm_irq_routing_msi { - __u32 address_lo; - __u32 address_hi; - __u32 data; - __u32 pad; -}; - -/* gsi routing entry types */ -#define KVM_IRQ_ROUTING_IRQCHIP 1 -#define KVM_IRQ_ROUTING_MSI 2 - -struct kvm_irq_routing_entry { - __u32 gsi; - __u32 type; - __u32 flags; - __u32 pad; - union { - struct kvm_irq_routing_irqchip irqchip; - struct kvm_irq_routing_msi msi; - __u32 pad[8]; - } u; -}; - -struct kvm_irq_routing { - __u32 nr; - __u32 flags; - struct kvm_irq_routing_entry entries[0]; -}; - -#endif - -#ifdef KVM_CAP_MCE -/* x86 MCE */ -struct kvm_x86_mce { - __u64 status; - __u64 addr; - __u64 misc; - __u64 mcg_status; - __u8 bank; - __u8 pad1[7]; - __u64 pad2[3]; -}; -#endif - -#ifdef KVM_CAP_XEN_HVM -struct kvm_xen_hvm_config { - __u32 flags; - __u32 msr; - __u64 blob_addr_32; - __u64 blob_addr_64; - __u8 blob_size_32; - __u8 blob_size_64; - __u8 pad2[30]; -}; -#endif - -#define KVM_IRQFD_FLAG_DEASSIGN (1 << 0) -/* - * Available with KVM_CAP_IRQFD_RESAMPLE - * - * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies - * the irqfd to operate in resampling mode for level triggered interrupt - * emlation. See Documentation/virtual/kvm/api.txt. - */ -#define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) - -struct kvm_irqfd { - __u32 fd; - __u32 gsi; - __u32 flags; - __u32 resamplefd; - __u8 pad[16]; -}; - -struct kvm_clock_data { - __u64 clock; - __u32 flags; - __u32 pad[9]; -}; - -#define KVM_MMU_FSL_BOOKE_NOHV 0 -#define KVM_MMU_FSL_BOOKE_HV 1 - -struct kvm_config_tlb { - __u64 params; - __u64 array; - __u32 mmu_type; - __u32 array_len; -}; - -struct kvm_dirty_tlb { - __u64 bitmap; - __u32 num_dirty; -}; - -/* Available with KVM_CAP_ONE_REG */ - -#define KVM_REG_ARCH_MASK 0xff00000000000000ULL -#define KVM_REG_GENERIC 0x0000000000000000ULL - -/* - * Architecture specific registers are to be defined in arch headers and - * ORed with the arch identifier. - */ -#define KVM_REG_PPC 0x1000000000000000ULL -#define KVM_REG_X86 0x2000000000000000ULL -#define KVM_REG_IA64 0x3000000000000000ULL -#define KVM_REG_ARM 0x4000000000000000ULL -#define KVM_REG_S390 0x5000000000000000ULL - -#define KVM_REG_SIZE_SHIFT 52 -#define KVM_REG_SIZE_MASK 0x00f0000000000000ULL -#define KVM_REG_SIZE_U8 0x0000000000000000ULL -#define KVM_REG_SIZE_U16 0x0010000000000000ULL -#define KVM_REG_SIZE_U32 0x0020000000000000ULL -#define KVM_REG_SIZE_U64 0x0030000000000000ULL -#define KVM_REG_SIZE_U128 0x0040000000000000ULL -#define KVM_REG_SIZE_U256 0x0050000000000000ULL -#define KVM_REG_SIZE_U512 0x0060000000000000ULL -#define KVM_REG_SIZE_U1024 0x0070000000000000ULL - -struct kvm_one_reg { - __u64 id; - __u64 addr; -}; - -struct kvm_msi { - __u32 address_lo; - __u32 address_hi; - __u32 data; - __u32 flags; - __u8 pad[16]; -}; - -/* - * ioctls for VM fds - */ -#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 0x40, struct kvm_memory_region) -/* - * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns - * a vcpu fd. - */ -#define KVM_CREATE_VCPU _IO(KVMIO, 0x41) -#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log) -/* KVM_SET_MEMORY_ALIAS is obsolete: */ -#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias) -#define KVM_SET_NR_MMU_PAGES _IO(KVMIO, 0x44) -#define KVM_GET_NR_MMU_PAGES _IO(KVMIO, 0x45) -#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \ - struct kvm_userspace_memory_region) -#define KVM_SET_TSS_ADDR _IO(KVMIO, 0x47) -#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64) - -/* enable ucontrol for s390 */ -struct kvm_s390_ucas_mapping { - __u64 user_addr; - __u64 vcpu_addr; - __u64 length; -}; -#define KVM_S390_UCAS_MAP _IOW(KVMIO, 0x50, struct kvm_s390_ucas_mapping) -#define KVM_S390_UCAS_UNMAP _IOW(KVMIO, 0x51, struct kvm_s390_ucas_mapping) -#define KVM_S390_VCPU_FAULT _IOW(KVMIO, 0x52, unsigned long) - -/* Device model IOC */ -#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60) -#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level) -#define KVM_GET_IRQCHIP _IOWR(KVMIO, 0x62, struct kvm_irqchip) -#define KVM_SET_IRQCHIP _IOR(KVMIO, 0x63, struct kvm_irqchip) -#define KVM_CREATE_PIT _IO(KVMIO, 0x64) -#define KVM_GET_PIT _IOWR(KVMIO, 0x65, struct kvm_pit_state) -#define KVM_SET_PIT _IOR(KVMIO, 0x66, struct kvm_pit_state) -#define KVM_IRQ_LINE_STATUS _IOWR(KVMIO, 0x67, struct kvm_irq_level) -#define KVM_REGISTER_COALESCED_MMIO \ - _IOW(KVMIO, 0x67, struct kvm_coalesced_mmio_zone) -#define KVM_UNREGISTER_COALESCED_MMIO \ - _IOW(KVMIO, 0x68, struct kvm_coalesced_mmio_zone) -#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \ - struct kvm_assigned_pci_dev) -#define KVM_SET_GSI_ROUTING _IOW(KVMIO, 0x6a, struct kvm_irq_routing) -/* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */ -#define KVM_ASSIGN_IRQ __KVM_DEPRECATED_VM_R_0x70 -#define KVM_ASSIGN_DEV_IRQ _IOW(KVMIO, 0x70, struct kvm_assigned_irq) -#define KVM_REINJECT_CONTROL _IO(KVMIO, 0x71) -#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \ - struct kvm_assigned_pci_dev) -#define KVM_ASSIGN_SET_MSIX_NR _IOW(KVMIO, 0x73, \ - struct kvm_assigned_msix_nr) -#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO, 0x74, \ - struct kvm_assigned_msix_entry) -#define KVM_DEASSIGN_DEV_IRQ _IOW(KVMIO, 0x75, struct kvm_assigned_irq) -#define KVM_IRQFD _IOW(KVMIO, 0x76, struct kvm_irqfd) -#define KVM_CREATE_PIT2 _IOW(KVMIO, 0x77, struct kvm_pit_config) -#define KVM_SET_BOOT_CPU_ID _IO(KVMIO, 0x78) -#define KVM_IOEVENTFD _IOW(KVMIO, 0x79, struct kvm_ioeventfd) -#define KVM_XEN_HVM_CONFIG _IOW(KVMIO, 0x7a, struct kvm_xen_hvm_config) -#define KVM_SET_CLOCK _IOW(KVMIO, 0x7b, struct kvm_clock_data) -#define KVM_GET_CLOCK _IOR(KVMIO, 0x7c, struct kvm_clock_data) -/* Available with KVM_CAP_PIT_STATE2 */ -#define KVM_GET_PIT2 _IOR(KVMIO, 0x9f, struct kvm_pit_state2) -#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) -/* Available with KVM_CAP_PPC_GET_PVINFO */ -#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) -/* Available with KVM_CAP_TSC_CONTROL */ -#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) -#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) -/* Available with KVM_CAP_PCI_2_3 */ -#define KVM_ASSIGN_SET_INTX_MASK _IOW(KVMIO, 0xa4, \ - struct kvm_assigned_pci_dev) -/* Available with KVM_CAP_SIGNAL_MSI */ -#define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) -/* Available with KVM_CAP_PPC_GET_SMMU_INFO */ -#define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) -/* Available with KVM_CAP_PPC_ALLOC_HTAB */ -#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) - -/* - * ioctls for vcpu fds - */ -#define KVM_RUN _IO(KVMIO, 0x80) -#define KVM_GET_REGS _IOR(KVMIO, 0x81, struct kvm_regs) -#define KVM_SET_REGS _IOW(KVMIO, 0x82, struct kvm_regs) -#define KVM_GET_SREGS _IOR(KVMIO, 0x83, struct kvm_sregs) -#define KVM_SET_SREGS _IOW(KVMIO, 0x84, struct kvm_sregs) -#define KVM_TRANSLATE _IOWR(KVMIO, 0x85, struct kvm_translation) -#define KVM_INTERRUPT _IOW(KVMIO, 0x86, struct kvm_interrupt) -/* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */ -#define KVM_DEBUG_GUEST __KVM_DEPRECATED_VCPU_W_0x87 -#define KVM_GET_MSRS _IOWR(KVMIO, 0x88, struct kvm_msrs) -#define KVM_SET_MSRS _IOW(KVMIO, 0x89, struct kvm_msrs) -#define KVM_SET_CPUID _IOW(KVMIO, 0x8a, struct kvm_cpuid) -#define KVM_SET_SIGNAL_MASK _IOW(KVMIO, 0x8b, struct kvm_signal_mask) -#define KVM_GET_FPU _IOR(KVMIO, 0x8c, struct kvm_fpu) -#define KVM_SET_FPU _IOW(KVMIO, 0x8d, struct kvm_fpu) -#define KVM_GET_LAPIC _IOR(KVMIO, 0x8e, struct kvm_lapic_state) -#define KVM_SET_LAPIC _IOW(KVMIO, 0x8f, struct kvm_lapic_state) -#define KVM_SET_CPUID2 _IOW(KVMIO, 0x90, struct kvm_cpuid2) -#define KVM_GET_CPUID2 _IOWR(KVMIO, 0x91, struct kvm_cpuid2) -/* Available with KVM_CAP_VAPIC */ -#define KVM_TPR_ACCESS_REPORTING _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl) -/* Available with KVM_CAP_VAPIC */ -#define KVM_SET_VAPIC_ADDR _IOW(KVMIO, 0x93, struct kvm_vapic_addr) -/* valid for virtual machine (for floating interrupt)_and_ vcpu */ -#define KVM_S390_INTERRUPT _IOW(KVMIO, 0x94, struct kvm_s390_interrupt) -/* store status for s390 */ -#define KVM_S390_STORE_STATUS_NOADDR (-1ul) -#define KVM_S390_STORE_STATUS_PREFIXED (-2ul) -#define KVM_S390_STORE_STATUS _IOW(KVMIO, 0x95, unsigned long) -/* initial ipl psw for s390 */ -#define KVM_S390_SET_INITIAL_PSW _IOW(KVMIO, 0x96, struct kvm_s390_psw) -/* initial reset for s390 */ -#define KVM_S390_INITIAL_RESET _IO(KVMIO, 0x97) -#define KVM_GET_MP_STATE _IOR(KVMIO, 0x98, struct kvm_mp_state) -#define KVM_SET_MP_STATE _IOW(KVMIO, 0x99, struct kvm_mp_state) -/* Available with KVM_CAP_NMI */ -#define KVM_NMI _IO(KVMIO, 0x9a) -/* Available with KVM_CAP_SET_GUEST_DEBUG */ -#define KVM_SET_GUEST_DEBUG _IOW(KVMIO, 0x9b, struct kvm_guest_debug) -/* MCE for x86 */ -#define KVM_X86_SETUP_MCE _IOW(KVMIO, 0x9c, __u64) -#define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO, 0x9d, __u64) -#define KVM_X86_SET_MCE _IOW(KVMIO, 0x9e, struct kvm_x86_mce) -/* IA64 stack access */ -#define KVM_IA64_VCPU_GET_STACK _IOR(KVMIO, 0x9a, void *) -#define KVM_IA64_VCPU_SET_STACK _IOW(KVMIO, 0x9b, void *) -/* Available with KVM_CAP_VCPU_EVENTS */ -#define KVM_GET_VCPU_EVENTS _IOR(KVMIO, 0x9f, struct kvm_vcpu_events) -#define KVM_SET_VCPU_EVENTS _IOW(KVMIO, 0xa0, struct kvm_vcpu_events) -/* Available with KVM_CAP_DEBUGREGS */ -#define KVM_GET_DEBUGREGS _IOR(KVMIO, 0xa1, struct kvm_debugregs) -#define KVM_SET_DEBUGREGS _IOW(KVMIO, 0xa2, struct kvm_debugregs) -#define KVM_ENABLE_CAP _IOW(KVMIO, 0xa3, struct kvm_enable_cap) -/* Available with KVM_CAP_XSAVE */ -#define KVM_GET_XSAVE _IOR(KVMIO, 0xa4, struct kvm_xsave) -#define KVM_SET_XSAVE _IOW(KVMIO, 0xa5, struct kvm_xsave) -/* Available with KVM_CAP_XCRS */ -#define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) -#define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) -#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) -/* Available with KVM_CAP_RMA */ -#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) -/* Available with KVM_CAP_SW_TLB */ -#define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) -/* Available with KVM_CAP_ONE_REG */ -#define KVM_GET_ONE_REG _IOW(KVMIO, 0xab, struct kvm_one_reg) -#define KVM_SET_ONE_REG _IOW(KVMIO, 0xac, struct kvm_one_reg) -/* VM is being stopped by host */ -#define KVM_KVMCLOCK_CTRL _IO(KVMIO, 0xad) - -#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0) -#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1) -#define KVM_DEV_ASSIGN_MASK_INTX (1 << 2) - -struct kvm_assigned_pci_dev { - __u32 assigned_dev_id; - __u32 busnr; - __u32 devfn; - __u32 flags; - __u32 segnr; - union { - __u32 reserved[11]; - }; -}; - -#define KVM_DEV_IRQ_HOST_INTX (1 << 0) -#define KVM_DEV_IRQ_HOST_MSI (1 << 1) -#define KVM_DEV_IRQ_HOST_MSIX (1 << 2) - -#define KVM_DEV_IRQ_GUEST_INTX (1 << 8) -#define KVM_DEV_IRQ_GUEST_MSI (1 << 9) -#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10) - -#define KVM_DEV_IRQ_HOST_MASK 0x00ff -#define KVM_DEV_IRQ_GUEST_MASK 0xff00 - -struct kvm_assigned_irq { - __u32 assigned_dev_id; - __u32 host_irq; /* ignored (legacy field) */ - __u32 guest_irq; - __u32 flags; - union { - __u32 reserved[12]; - }; -}; - -struct kvm_assigned_msix_nr { - __u32 assigned_dev_id; - __u16 entry_nr; - __u16 padding; -}; - -#define KVM_MAX_MSIX_PER_DEV 256 -struct kvm_assigned_msix_entry { - __u32 assigned_dev_id; - __u32 gsi; - __u16 entry; /* The index of entry in the MSI-X table */ - __u16 padding[3]; -}; - -#endif /* __LINUX_KVM_H */ diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h index ff476ddaf310..00a97bb905db 100644 --- a/include/linux/kvm_para.h +++ b/include/linux/kvm_para.h @@ -1,31 +1,8 @@ #ifndef __LINUX_KVM_PARA_H #define __LINUX_KVM_PARA_H -/* - * This header file provides a method for making a hypercall to the host - * Architectures should define: - * - kvm_hypercall0, kvm_hypercall1... - * - kvm_arch_para_features - * - kvm_para_available - */ +#include -/* Return values for hypercalls */ -#define KVM_ENOSYS 1000 -#define KVM_EFAULT EFAULT -#define KVM_E2BIG E2BIG -#define KVM_EPERM EPERM - -#define KVM_HC_VAPIC_POLL_IRQ 1 -#define KVM_HC_MMU_OP 2 -#define KVM_HC_FEATURES 3 -#define KVM_HC_PPC_MAP_MAGIC_PAGE 4 - -/* - * hypercalls use architecture specific - */ -#include - -#ifdef __KERNEL__ static inline int kvm_para_has_feature(unsigned int feature) { @@ -33,5 +10,4 @@ static inline int kvm_para_has_feature(unsigned int feature) return 1; return 0; } -#endif /* __KERNEL__ */ #endif /* __LINUX_KVM_PARA_H */ diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h index 7eab668f60f3..bffdb962f1a6 100644 --- a/include/linux/l2tp.h +++ b/include/linux/l2tp.h @@ -3,181 +3,11 @@ * * Author: James Chapman */ - #ifndef _LINUX_L2TP_H_ #define _LINUX_L2TP_H_ -#include -#include -#ifdef __KERNEL__ #include #include -#else -#include -#endif - -#define IPPROTO_L2TP 115 - -/** - * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets - * @l2tp_family: address family number AF_L2TPIP. - * @l2tp_addr: protocol specific address information - * @l2tp_conn_id: connection id of tunnel - */ -#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ -struct sockaddr_l2tpip { - /* The first fields must match struct sockaddr_in */ - __kernel_sa_family_t l2tp_family; /* AF_INET */ - __be16 l2tp_unused; /* INET port number (unused) */ - struct in_addr l2tp_addr; /* Internet address */ - - __u32 l2tp_conn_id; /* Connection ID of tunnel */ - - /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[sizeof(struct sockaddr) - - sizeof(__kernel_sa_family_t) - - sizeof(__be16) - sizeof(struct in_addr) - - sizeof(__u32)]; -}; - -/** - * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets - * @l2tp_family: address family number AF_L2TPIP. - * @l2tp_addr: protocol specific address information - * @l2tp_conn_id: connection id of tunnel - */ -struct sockaddr_l2tpip6 { - /* The first fields must match struct sockaddr_in6 */ - __kernel_sa_family_t l2tp_family; /* AF_INET6 */ - __be16 l2tp_unused; /* INET port number (unused) */ - __be32 l2tp_flowinfo; /* IPv6 flow information */ - struct in6_addr l2tp_addr; /* IPv6 address */ - __u32 l2tp_scope_id; /* scope id (new in RFC2553) */ - __u32 l2tp_conn_id; /* Connection ID of tunnel */ -}; - -/***************************************************************************** - * NETLINK_GENERIC netlink family. - *****************************************************************************/ - -/* - * Commands. - * Valid TLVs of each command are:- - * TUNNEL_CREATE - CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid - * TUNNEL_DELETE - CONN_ID - * TUNNEL_MODIFY - CONN_ID, udpcsum - * TUNNEL_GETSTATS - CONN_ID, (stats) - * TUNNEL_GET - CONN_ID, (...) - * SESSION_CREATE - SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec - * SESSION_DELETE - SESSION_ID - * SESSION_MODIFY - SESSION_ID, data_seq - * SESSION_GET - SESSION_ID, (...) - * SESSION_GETSTATS - SESSION_ID, (stats) - * - */ -enum { - L2TP_CMD_NOOP, - L2TP_CMD_TUNNEL_CREATE, - L2TP_CMD_TUNNEL_DELETE, - L2TP_CMD_TUNNEL_MODIFY, - L2TP_CMD_TUNNEL_GET, - L2TP_CMD_SESSION_CREATE, - L2TP_CMD_SESSION_DELETE, - L2TP_CMD_SESSION_MODIFY, - L2TP_CMD_SESSION_GET, - __L2TP_CMD_MAX, -}; - -#define L2TP_CMD_MAX (__L2TP_CMD_MAX - 1) - -/* - * ATTR types defined for L2TP - */ -enum { - L2TP_ATTR_NONE, /* no data */ - L2TP_ATTR_PW_TYPE, /* u16, enum l2tp_pwtype */ - L2TP_ATTR_ENCAP_TYPE, /* u16, enum l2tp_encap_type */ - L2TP_ATTR_OFFSET, /* u16 */ - L2TP_ATTR_DATA_SEQ, /* u16 */ - L2TP_ATTR_L2SPEC_TYPE, /* u8, enum l2tp_l2spec_type */ - L2TP_ATTR_L2SPEC_LEN, /* u8, enum l2tp_l2spec_type */ - L2TP_ATTR_PROTO_VERSION, /* u8 */ - L2TP_ATTR_IFNAME, /* string */ - L2TP_ATTR_CONN_ID, /* u32 */ - L2TP_ATTR_PEER_CONN_ID, /* u32 */ - L2TP_ATTR_SESSION_ID, /* u32 */ - L2TP_ATTR_PEER_SESSION_ID, /* u32 */ - L2TP_ATTR_UDP_CSUM, /* u8 */ - L2TP_ATTR_VLAN_ID, /* u16 */ - L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */ - L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */ - L2TP_ATTR_DEBUG, /* u32 */ - L2TP_ATTR_RECV_SEQ, /* u8 */ - L2TP_ATTR_SEND_SEQ, /* u8 */ - L2TP_ATTR_LNS_MODE, /* u8 */ - L2TP_ATTR_USING_IPSEC, /* u8 */ - L2TP_ATTR_RECV_TIMEOUT, /* msec */ - L2TP_ATTR_FD, /* int */ - L2TP_ATTR_IP_SADDR, /* u32 */ - L2TP_ATTR_IP_DADDR, /* u32 */ - L2TP_ATTR_UDP_SPORT, /* u16 */ - L2TP_ATTR_UDP_DPORT, /* u16 */ - L2TP_ATTR_MTU, /* u16 */ - L2TP_ATTR_MRU, /* u16 */ - L2TP_ATTR_STATS, /* nested */ - L2TP_ATTR_IP6_SADDR, /* struct in6_addr */ - L2TP_ATTR_IP6_DADDR, /* struct in6_addr */ - __L2TP_ATTR_MAX, -}; - -#define L2TP_ATTR_MAX (__L2TP_ATTR_MAX - 1) - -/* Nested in L2TP_ATTR_STATS */ -enum { - L2TP_ATTR_STATS_NONE, /* no data */ - L2TP_ATTR_TX_PACKETS, /* u64 */ - L2TP_ATTR_TX_BYTES, /* u64 */ - L2TP_ATTR_TX_ERRORS, /* u64 */ - L2TP_ATTR_RX_PACKETS, /* u64 */ - L2TP_ATTR_RX_BYTES, /* u64 */ - L2TP_ATTR_RX_SEQ_DISCARDS, /* u64 */ - L2TP_ATTR_RX_OOS_PACKETS, /* u64 */ - L2TP_ATTR_RX_ERRORS, /* u64 */ - __L2TP_ATTR_STATS_MAX, -}; - -#define L2TP_ATTR_STATS_MAX (__L2TP_ATTR_STATS_MAX - 1) - -enum l2tp_pwtype { - L2TP_PWTYPE_NONE = 0x0000, - L2TP_PWTYPE_ETH_VLAN = 0x0004, - L2TP_PWTYPE_ETH = 0x0005, - L2TP_PWTYPE_PPP = 0x0007, - L2TP_PWTYPE_PPP_AC = 0x0008, - L2TP_PWTYPE_IP = 0x000b, - __L2TP_PWTYPE_MAX -}; - -enum l2tp_l2spec_type { - L2TP_L2SPECTYPE_NONE, - L2TP_L2SPECTYPE_DEFAULT, -}; - -enum l2tp_encap_type { - L2TP_ENCAPTYPE_UDP, - L2TP_ENCAPTYPE_IP, -}; - -enum l2tp_seqmode { - L2TP_SEQ_NONE = 0, - L2TP_SEQ_IP = 1, - L2TP_SEQ_ALL = 2, -}; - -/* - * NETLINK_GENERIC related info - */ -#define L2TP_GENL_NAME "l2tp" -#define L2TP_GENL_VERSION 0x1 +#include #endif diff --git a/include/linux/limits.h b/include/linux/limits.h deleted file mode 100644 index 2d0f94162fb3..000000000000 --- a/include/linux/limits.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _LINUX_LIMITS_H -#define _LINUX_LIMITS_H - -#define NR_OPEN 1024 - -#define NGROUPS_MAX 65536 /* supplemental group IDs are available */ -#define ARG_MAX 131072 /* # bytes of args + environ for exec() */ -#define LINK_MAX 127 /* # links a file may have */ -#define MAX_CANON 255 /* size of the canonical input queue */ -#define MAX_INPUT 255 /* size of the type-ahead buffer */ -#define NAME_MAX 255 /* # chars in a file name */ -#define PATH_MAX 4096 /* # chars in a path name including nul */ -#define PIPE_BUF 4096 /* # bytes in atomic write to a pipe */ -#define XATTR_NAME_MAX 255 /* # chars in an extended attribute name */ -#define XATTR_SIZE_MAX 65536 /* size of an extended attribute value (64k) */ -#define XATTR_LIST_MAX 65536 /* size of extended attribute namelist (64k) */ - -#define RTSIG_MAX 32 - -#endif diff --git a/include/linux/llc.h b/include/linux/llc.h index a2418ae13ee9..b965314d017f 100644 --- a/include/linux/llc.h +++ b/include/linux/llc.h @@ -1,5 +1,3 @@ -#ifndef __LINUX_LLC_H -#define __LINUX_LLC_H /* * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators. * @@ -12,80 +10,14 @@ * * See the GNU General Public License for more details. */ +#ifndef __LINUX_LLC_H +#define __LINUX_LLC_H -#include - -#define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */ -struct sockaddr_llc { - __kernel_sa_family_t sllc_family; /* AF_LLC */ - __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ - unsigned char sllc_test; - unsigned char sllc_xid; - unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */ - unsigned char sllc_sap; - unsigned char sllc_mac[IFHWADDRLEN]; - unsigned char __pad[__LLC_SOCK_SIZE__ - - sizeof(__kernel_sa_family_t) * 2 - - sizeof(unsigned char) * 4 - IFHWADDRLEN]; -}; - -/* sockopt definitions. */ -enum llc_sockopts { - LLC_OPT_UNKNOWN = 0, - LLC_OPT_RETRY, /* max retrans attempts. */ - LLC_OPT_SIZE, /* max PDU size (octets). */ - LLC_OPT_ACK_TMR_EXP, /* ack expire time (secs). */ - LLC_OPT_P_TMR_EXP, /* pf cycle expire time (secs). */ - LLC_OPT_REJ_TMR_EXP, /* rej sent expire time (secs). */ - LLC_OPT_BUSY_TMR_EXP, /* busy state expire time (secs). */ - LLC_OPT_TX_WIN, /* tx window size. */ - LLC_OPT_RX_WIN, /* rx window size. */ - LLC_OPT_PKTINFO, /* ancillary packet information. */ - LLC_OPT_MAX -}; - -#define LLC_OPT_MAX_RETRY 100 -#define LLC_OPT_MAX_SIZE 4196 -#define LLC_OPT_MAX_WIN 127 -#define LLC_OPT_MAX_ACK_TMR_EXP 60 -#define LLC_OPT_MAX_P_TMR_EXP 60 -#define LLC_OPT_MAX_REJ_TMR_EXP 60 -#define LLC_OPT_MAX_BUSY_TMR_EXP 60 - -/* LLC SAP types. */ -#define LLC_SAP_NULL 0x00 /* NULL SAP. */ -#define LLC_SAP_LLC 0x02 /* LLC Sublayer Management. */ -#define LLC_SAP_SNA 0x04 /* SNA Path Control. */ -#define LLC_SAP_PNM 0x0E /* Proway Network Management. */ -#define LLC_SAP_IP 0x06 /* TCP/IP. */ -#define LLC_SAP_BSPAN 0x42 /* Bridge Spanning Tree Proto */ -#define LLC_SAP_MMS 0x4E /* Manufacturing Message Srv. */ -#define LLC_SAP_8208 0x7E /* ISO 8208 */ -#define LLC_SAP_3COM 0x80 /* 3COM. */ -#define LLC_SAP_PRO 0x8E /* Proway Active Station List */ -#define LLC_SAP_SNAP 0xAA /* SNAP. */ -#define LLC_SAP_BANYAN 0xBC /* Banyan. */ -#define LLC_SAP_IPX 0xE0 /* IPX/SPX. */ -#define LLC_SAP_NETBEUI 0xF0 /* NetBEUI. */ -#define LLC_SAP_LANMGR 0xF4 /* LanManager. */ -#define LLC_SAP_IMPL 0xF8 /* IMPL */ -#define LLC_SAP_DISC 0xFC /* Discovery */ -#define LLC_SAP_OSI 0xFE /* OSI Network Layers. */ -#define LLC_SAP_LAR 0xDC /* LAN Address Resolution */ -#define LLC_SAP_RM 0xD4 /* Resource Management */ -#define LLC_SAP_GLOBAL 0xFF /* Global SAP. */ - -struct llc_pktinfo { - int lpi_ifindex; - unsigned char lpi_sap; - unsigned char lpi_mac[IFHWADDRLEN]; -}; +#include -#ifdef __KERNEL__ #define LLC_SAP_DYN_START 0xC0 #define LLC_SAP_DYN_STOP 0xDE #define LLC_SAP_DYN_TRIES 4 #define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0])) -#endif /* __KERNEL__ */ #endif /* __LINUX_LLC_H */ diff --git a/include/linux/loop.h b/include/linux/loop.h index 9635116dd830..6492181bcb1d 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -1,6 +1,3 @@ -#ifndef _LINUX_LOOP_H -#define _LINUX_LOOP_H - /* * include/linux/loop.h * @@ -9,15 +6,14 @@ * Copyright 1993 by Theodore Ts'o. Redistribution of this file is * permitted under the GNU General Public License. */ +#ifndef _LINUX_LOOP_H +#define _LINUX_LOOP_H -#define LO_NAME_SIZE 64 -#define LO_KEY_SIZE 32 - -#ifdef __KERNEL__ #include #include #include #include +#include /* Possible states of device */ enum { @@ -66,69 +62,6 @@ struct loop_device { struct gendisk *lo_disk; }; -#endif /* __KERNEL__ */ - -/* - * Loop flags - */ -enum { - LO_FLAGS_READ_ONLY = 1, - LO_FLAGS_AUTOCLEAR = 4, - LO_FLAGS_PARTSCAN = 8, -}; - -#include /* for __kernel_old_dev_t */ -#include /* for __u64 */ - -/* Backwards compatibility version */ -struct loop_info { - int lo_number; /* ioctl r/o */ - __kernel_old_dev_t lo_device; /* ioctl r/o */ - unsigned long lo_inode; /* ioctl r/o */ - __kernel_old_dev_t lo_rdevice; /* ioctl r/o */ - int lo_offset; - int lo_encrypt_type; - int lo_encrypt_key_size; /* ioctl w/o */ - int lo_flags; /* ioctl r/o */ - char lo_name[LO_NAME_SIZE]; - unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ - unsigned long lo_init[2]; - char reserved[4]; -}; - -struct loop_info64 { - __u64 lo_device; /* ioctl r/o */ - __u64 lo_inode; /* ioctl r/o */ - __u64 lo_rdevice; /* ioctl r/o */ - __u64 lo_offset; - __u64 lo_sizelimit;/* bytes, 0 == max available */ - __u32 lo_number; /* ioctl r/o */ - __u32 lo_encrypt_type; - __u32 lo_encrypt_key_size; /* ioctl w/o */ - __u32 lo_flags; /* ioctl r/o */ - __u8 lo_file_name[LO_NAME_SIZE]; - __u8 lo_crypt_name[LO_NAME_SIZE]; - __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ - __u64 lo_init[2]; -}; - -/* - * Loop filter types - */ - -#define LO_CRYPT_NONE 0 -#define LO_CRYPT_XOR 1 -#define LO_CRYPT_DES 2 -#define LO_CRYPT_FISH2 3 /* Twofish encryption */ -#define LO_CRYPT_BLOW 4 -#define LO_CRYPT_CAST128 5 -#define LO_CRYPT_IDEA 6 -#define LO_CRYPT_DUMMY 9 -#define LO_CRYPT_SKIPJACK 10 -#define LO_CRYPT_CRYPTOAPI 18 -#define MAX_LO_CRYPT 20 - -#ifdef __KERNEL__ /* Support for loadable transfer modules */ struct loop_func_table { int number; /* filter type */ @@ -147,21 +80,3 @@ int loop_register_transfer(struct loop_func_table *funcs); int loop_unregister_transfer(int number); #endif -/* - * IOCTL commands --- we will commandeer 0x4C ('L') - */ - -#define LOOP_SET_FD 0x4C00 -#define LOOP_CLR_FD 0x4C01 -#define LOOP_SET_STATUS 0x4C02 -#define LOOP_GET_STATUS 0x4C03 -#define LOOP_SET_STATUS64 0x4C04 -#define LOOP_GET_STATUS64 0x4C05 -#define LOOP_CHANGE_FD 0x4C06 -#define LOOP_SET_CAPACITY 0x4C07 - -/* /dev/loop-control interface */ -#define LOOP_CTL_ADD 0x4C80 -#define LOOP_CTL_REMOVE 0x4C81 -#define LOOP_CTL_GET_FREE 0x4C82 -#endif diff --git a/include/linux/lp.h b/include/linux/lp.h index 0df024bfd6f0..0dd276af9e4e 100644 --- a/include/linux/lp.h +++ b/include/linux/lp.h @@ -1,105 +1,16 @@ -#ifndef _LINUX_LP_H -#define _LINUX_LP_H - /* * usr/include/linux/lp.h c.1991-1992 James Wiegand * many modifications copyright (C) 1992 Michael K. Johnson * Interrupt support added 1993 Nigel Gamble * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti */ +#ifndef _LINUX_LP_H +#define _LINUX_LP_H -/* - * Per POSIX guidelines, this module reserves the LP and lp prefixes - * These are the lp_table[minor].flags flags... - */ -#define LP_EXIST 0x0001 -#define LP_SELEC 0x0002 -#define LP_BUSY 0x0004 -#define LP_BUSY_BIT_POS 2 -#define LP_OFFL 0x0008 -#define LP_NOPA 0x0010 -#define LP_ERR 0x0020 -#define LP_ABORT 0x0040 -#define LP_CAREFUL 0x0080 /* obsoleted -arca */ -#define LP_ABORTOPEN 0x0100 - -#define LP_TRUST_IRQ_ 0x0200 /* obsolete */ -#define LP_NO_REVERSE 0x0400 /* No reverse mode available. */ -#define LP_DATA_AVAIL 0x0800 /* Data is available. */ - -/* - * bit defines for 8255 status port - * base + 1 - * accessed with LP_S(minor), which gets the byte... - */ -#define LP_PBUSY 0x80 /* inverted input, active high */ -#define LP_PACK 0x40 /* unchanged input, active low */ -#define LP_POUTPA 0x20 /* unchanged input, active high */ -#define LP_PSELECD 0x10 /* unchanged input, active high */ -#define LP_PERRORP 0x08 /* unchanged input, active low */ - -/* timeout for each character. This is relative to bus cycles -- it - * is the count in a busy loop. THIS IS THE VALUE TO CHANGE if you - * have extremely slow printing, or if the machine seems to slow down - * a lot when you print. If you have slow printing, increase this - * number and recompile, and if your system gets bogged down, decrease - * this number. This can be changed with the tunelp(8) command as well. - */ - -#define LP_INIT_CHAR 1000 - -/* The parallel port specs apparently say that there needs to be - * a .5usec wait before and after the strobe. - */ - -#define LP_INIT_WAIT 1 - -/* This is the amount of time that the driver waits for the printer to - * catch up when the printer's buffer appears to be filled. If you - * want to tune this and have a fast printer (i.e. HPIIIP), decrease - * this number, and if you have a slow printer, increase this number. - * This is in hundredths of a second, the default 2 being .05 second. - * Or use the tunelp(8) command, which is especially nice if you want - * change back and forth between character and graphics printing, which - * are wildly different... - */ - -#define LP_INIT_TIME 2 - -/* IOCTL numbers */ -#define LPCHAR 0x0601 /* corresponds to LP_INIT_CHAR */ -#define LPTIME 0x0602 /* corresponds to LP_INIT_TIME */ -#define LPABORT 0x0604 /* call with TRUE arg to abort on error, - FALSE to retry. Default is retry. */ -#define LPSETIRQ 0x0605 /* call with new IRQ number, - or 0 for polling (no IRQ) */ -#define LPGETIRQ 0x0606 /* get the current IRQ number */ -#define LPWAIT 0x0608 /* corresponds to LP_INIT_WAIT */ -/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */ -#define LPCAREFUL 0x0609 /* call with TRUE arg to require out-of-paper, off- - line, and error indicators good on all writes, - FALSE to ignore them. Default is ignore. */ -#define LPABORTOPEN 0x060a /* call with TRUE arg to abort open() on error, - FALSE to ignore error. Default is ignore. */ -#define LPGETSTATUS 0x060b /* return LP_S(minor) */ -#define LPRESET 0x060c /* reset printer */ -#ifdef LP_STATS -#define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ -#endif -#define LPGETFLAGS 0x060e /* get status flags */ -#define LPSETTIMEOUT 0x060f /* set parport timeout */ - -/* timeout for printk'ing a timeout, in jiffies (100ths of a second). - This is also used for re-checking error conditions if LP_ABORT is - not set. This is the default behavior. */ - -#define LP_TIMEOUT_INTERRUPT (60 * HZ) -#define LP_TIMEOUT_POLLED (10 * HZ) - -#ifdef __KERNEL__ #include #include +#include /* Magic numbers for defining port-device mappings */ #define LP_PARPORT_UNSPEC -4 @@ -187,5 +98,3 @@ struct lp_struct { #define LP_DELAY 50 #endif - -#endif diff --git a/include/linux/magic.h b/include/linux/magic.h deleted file mode 100644 index e15192cb9cf4..000000000000 --- a/include/linux/magic.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef __LINUX_MAGIC_H__ -#define __LINUX_MAGIC_H__ - -#define ADFS_SUPER_MAGIC 0xadf5 -#define AFFS_SUPER_MAGIC 0xadff -#define AFS_SUPER_MAGIC 0x5346414F -#define AUTOFS_SUPER_MAGIC 0x0187 -#define CODA_SUPER_MAGIC 0x73757245 -#define CRAMFS_MAGIC 0x28cd3d45 /* some random number */ -#define CRAMFS_MAGIC_WEND 0x453dcd28 /* magic number with the wrong endianess */ -#define DEBUGFS_MAGIC 0x64626720 -#define SECURITYFS_MAGIC 0x73636673 -#define SELINUX_MAGIC 0xf97cff8c -#define RAMFS_MAGIC 0x858458f6 /* some random number */ -#define TMPFS_MAGIC 0x01021994 -#define HUGETLBFS_MAGIC 0x958458f6 /* some random number */ -#define SQUASHFS_MAGIC 0x73717368 -#define ECRYPTFS_SUPER_MAGIC 0xf15f -#define EFS_SUPER_MAGIC 0x414A53 -#define EXT2_SUPER_MAGIC 0xEF53 -#define EXT3_SUPER_MAGIC 0xEF53 -#define XENFS_SUPER_MAGIC 0xabba1974 -#define EXT4_SUPER_MAGIC 0xEF53 -#define BTRFS_SUPER_MAGIC 0x9123683E -#define NILFS_SUPER_MAGIC 0x3434 -#define HPFS_SUPER_MAGIC 0xf995e849 -#define ISOFS_SUPER_MAGIC 0x9660 -#define JFFS2_SUPER_MAGIC 0x72b6 -#define PSTOREFS_MAGIC 0x6165676C - -#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ -#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ -#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */ -#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */ -#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */ - -#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */ -#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */ -#define NFS_SUPER_MAGIC 0x6969 -#define OPENPROM_SUPER_MAGIC 0x9fa1 -#define QNX4_SUPER_MAGIC 0x002f /* qnx4 fs detection */ -#define QNX6_SUPER_MAGIC 0x68191122 /* qnx6 fs detection */ - -#define REISERFS_SUPER_MAGIC 0x52654973 /* used by gcc */ - /* used by file system utilities that - look at the superblock, etc. */ -#define REISERFS_SUPER_MAGIC_STRING "ReIsErFs" -#define REISER2FS_SUPER_MAGIC_STRING "ReIsEr2Fs" -#define REISER2FS_JR_SUPER_MAGIC_STRING "ReIsEr3Fs" - -#define SMB_SUPER_MAGIC 0x517B -#define CGROUP_SUPER_MAGIC 0x27e0eb - - -#define STACK_END_MAGIC 0x57AC6E9D - -#define V9FS_MAGIC 0x01021997 - -#define BDEVFS_MAGIC 0x62646576 -#define BINFMTFS_MAGIC 0x42494e4d -#define DEVPTS_SUPER_MAGIC 0x1cd1 -#define FUTEXFS_SUPER_MAGIC 0xBAD1DEA -#define PIPEFS_MAGIC 0x50495045 -#define PROC_SUPER_MAGIC 0x9fa0 -#define SOCKFS_MAGIC 0x534F434B -#define SYSFS_MAGIC 0x62656572 -#define USBDEVICE_SUPER_MAGIC 0x9fa2 -#define MTD_INODE_FS_MAGIC 0x11307854 -#define ANON_INODE_FS_MAGIC 0x09041934 - - -#endif /* __LINUX_MAGIC_H__ */ diff --git a/include/linux/major.h b/include/linux/major.h deleted file mode 100644 index 6a8ca98c9a96..000000000000 --- a/include/linux/major.h +++ /dev/null @@ -1,177 +0,0 @@ -#ifndef _LINUX_MAJOR_H -#define _LINUX_MAJOR_H - -/* - * This file has definitions for major device numbers. - * For the device number assignments, see Documentation/devices.txt. - */ - -#define UNNAMED_MAJOR 0 -#define MEM_MAJOR 1 -#define RAMDISK_MAJOR 1 -#define FLOPPY_MAJOR 2 -#define PTY_MASTER_MAJOR 2 -#define IDE0_MAJOR 3 -#define HD_MAJOR IDE0_MAJOR -#define PTY_SLAVE_MAJOR 3 -#define TTY_MAJOR 4 -#define TTYAUX_MAJOR 5 -#define LP_MAJOR 6 -#define VCS_MAJOR 7 -#define LOOP_MAJOR 7 -#define SCSI_DISK0_MAJOR 8 -#define SCSI_TAPE_MAJOR 9 -#define MD_MAJOR 9 -#define MISC_MAJOR 10 -#define SCSI_CDROM_MAJOR 11 -#define MUX_MAJOR 11 /* PA-RISC only */ -#define XT_DISK_MAJOR 13 -#define INPUT_MAJOR 13 -#define SOUND_MAJOR 14 -#define CDU31A_CDROM_MAJOR 15 -#define JOYSTICK_MAJOR 15 -#define GOLDSTAR_CDROM_MAJOR 16 -#define OPTICS_CDROM_MAJOR 17 -#define SANYO_CDROM_MAJOR 18 -#define CYCLADES_MAJOR 19 -#define CYCLADESAUX_MAJOR 20 -#define MITSUMI_X_CDROM_MAJOR 20 -#define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */ -#define SCSI_GENERIC_MAJOR 21 -#define IDE1_MAJOR 22 -#define DIGICU_MAJOR 22 -#define DIGI_MAJOR 23 -#define MITSUMI_CDROM_MAJOR 23 -#define CDU535_CDROM_MAJOR 24 -#define STL_SERIALMAJOR 24 -#define MATSUSHITA_CDROM_MAJOR 25 -#define STL_CALLOUTMAJOR 25 -#define MATSUSHITA_CDROM2_MAJOR 26 -#define QIC117_TAPE_MAJOR 27 -#define MATSUSHITA_CDROM3_MAJOR 27 -#define MATSUSHITA_CDROM4_MAJOR 28 -#define STL_SIOMEMMAJOR 28 -#define ACSI_MAJOR 28 -#define AZTECH_CDROM_MAJOR 29 -#define FB_MAJOR 29 /* /dev/fb* framebuffers */ -#define CM206_CDROM_MAJOR 32 -#define IDE2_MAJOR 33 -#define IDE3_MAJOR 34 -#define Z8530_MAJOR 34 -#define XPRAM_MAJOR 35 /* Expanded storage on S/390: "slow ram"*/ -#define NETLINK_MAJOR 36 -#define PS2ESDI_MAJOR 36 -#define IDETAPE_MAJOR 37 -#define Z2RAM_MAJOR 37 -#define APBLOCK_MAJOR 38 /* AP1000 Block device */ -#define DDV_MAJOR 39 /* AP1000 DDV block device */ -#define NBD_MAJOR 43 /* Network block device */ -#define RISCOM8_NORMAL_MAJOR 48 -#define DAC960_MAJOR 48 /* 48..55 */ -#define RISCOM8_CALLOUT_MAJOR 49 -#define MKISS_MAJOR 55 -#define DSP56K_MAJOR 55 /* DSP56001 processor device */ - -#define IDE4_MAJOR 56 -#define IDE5_MAJOR 57 - -#define SCSI_DISK1_MAJOR 65 -#define SCSI_DISK2_MAJOR 66 -#define SCSI_DISK3_MAJOR 67 -#define SCSI_DISK4_MAJOR 68 -#define SCSI_DISK5_MAJOR 69 -#define SCSI_DISK6_MAJOR 70 -#define SCSI_DISK7_MAJOR 71 - -#define COMPAQ_SMART2_MAJOR 72 -#define COMPAQ_SMART2_MAJOR1 73 -#define COMPAQ_SMART2_MAJOR2 74 -#define COMPAQ_SMART2_MAJOR3 75 -#define COMPAQ_SMART2_MAJOR4 76 -#define COMPAQ_SMART2_MAJOR5 77 -#define COMPAQ_SMART2_MAJOR6 78 -#define COMPAQ_SMART2_MAJOR7 79 - -#define SPECIALIX_NORMAL_MAJOR 75 -#define SPECIALIX_CALLOUT_MAJOR 76 - -#define AURORA_MAJOR 79 - -#define I2O_MAJOR 80 /* 80->87 */ - -#define SHMIQ_MAJOR 85 /* Linux/mips, SGI /dev/shmiq */ -#define SCSI_CHANGER_MAJOR 86 - -#define IDE6_MAJOR 88 -#define IDE7_MAJOR 89 -#define IDE8_MAJOR 90 -#define IDE9_MAJOR 91 - -#define DASD_MAJOR 94 - -#define MDISK_MAJOR 95 - -#define UBD_MAJOR 98 - -#define PP_MAJOR 99 -#define JSFD_MAJOR 99 - -#define PHONE_MAJOR 100 - -#define COMPAQ_CISS_MAJOR 104 -#define COMPAQ_CISS_MAJOR1 105 -#define COMPAQ_CISS_MAJOR2 106 -#define COMPAQ_CISS_MAJOR3 107 -#define COMPAQ_CISS_MAJOR4 108 -#define COMPAQ_CISS_MAJOR5 109 -#define COMPAQ_CISS_MAJOR6 110 -#define COMPAQ_CISS_MAJOR7 111 - -#define VIODASD_MAJOR 112 -#define VIOCD_MAJOR 113 - -#define ATARAID_MAJOR 114 - -#define SCSI_DISK8_MAJOR 128 -#define SCSI_DISK9_MAJOR 129 -#define SCSI_DISK10_MAJOR 130 -#define SCSI_DISK11_MAJOR 131 -#define SCSI_DISK12_MAJOR 132 -#define SCSI_DISK13_MAJOR 133 -#define SCSI_DISK14_MAJOR 134 -#define SCSI_DISK15_MAJOR 135 - -#define UNIX98_PTY_MASTER_MAJOR 128 -#define UNIX98_PTY_MAJOR_COUNT 8 -#define UNIX98_PTY_SLAVE_MAJOR (UNIX98_PTY_MASTER_MAJOR+UNIX98_PTY_MAJOR_COUNT) - -#define DRBD_MAJOR 147 -#define RTF_MAJOR 150 -#define RAW_MAJOR 162 - -#define USB_ACM_MAJOR 166 -#define USB_ACM_AUX_MAJOR 167 -#define USB_CHAR_MAJOR 180 - -#define MMC_BLOCK_MAJOR 179 - -#define VXVM_MAJOR 199 /* VERITAS volume i/o driver */ -#define VXSPEC_MAJOR 200 /* VERITAS volume config driver */ -#define VXDMP_MAJOR 201 /* VERITAS volume multipath driver */ - -#define XENVBD_MAJOR 202 /* Xen virtual block device */ - -#define MSR_MAJOR 202 -#define CPUID_MAJOR 203 - -#define OSST_MAJOR 206 /* OnStream-SCx0 SCSI tape */ - -#define IBM_TTY3270_MAJOR 227 -#define IBM_FS3270_MAJOR 228 - -#define VIOTAPE_MAJOR 230 - -#define BLOCK_EXT_MAJOR 259 -#define SCSI_OSD_MAJOR 260 /* open-osd's OSD scsi device */ - -#endif diff --git a/include/linux/map_to_7segment.h b/include/linux/map_to_7segment.h deleted file mode 100644 index 12d62a54d470..000000000000 --- a/include/linux/map_to_7segment.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (c) 2005 Henk Vergonet - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef MAP_TO_7SEGMENT_H -#define MAP_TO_7SEGMENT_H - -/* This file provides translation primitives and tables for the conversion - * of (ASCII) characters to a 7-segments notation. - * - * The 7 segment's wikipedia notation below is used as standard. - * See: http://en.wikipedia.org/wiki/Seven_segment_display - * - * Notation: +-a-+ - * f b - * +-g-+ - * e c - * +-d-+ - * - * Usage: - * - * Register a map variable, and fill it with a character set: - * static SEG7_DEFAULT_MAP(map_seg7); - * - * - * Then use for conversion: - * seg7 = map_to_seg7(&map_seg7, some_char); - * ... - * - * In device drivers it is recommended, if required, to make the char map - * accessible via the sysfs interface using the following scheme: - * - * static ssize_t show_map(struct device *dev, char *buf) { - * memcpy(buf, &map_seg7, sizeof(map_seg7)); - * return sizeof(map_seg7); - * } - * static ssize_t store_map(struct device *dev, const char *buf, size_t cnt) { - * if(cnt != sizeof(map_seg7)) - * return -EINVAL; - * memcpy(&map_seg7, buf, cnt); - * return cnt; - * } - * static DEVICE_ATTR(map_seg7, PERMS_RW, show_map, store_map); - * - * History: - * 2005-05-31 RFC linux-kernel@vger.kernel.org - */ -#include - - -#define BIT_SEG7_A 0 -#define BIT_SEG7_B 1 -#define BIT_SEG7_C 2 -#define BIT_SEG7_D 3 -#define BIT_SEG7_E 4 -#define BIT_SEG7_F 5 -#define BIT_SEG7_G 6 -#define BIT_SEG7_RESERVED 7 - -struct seg7_conversion_map { - unsigned char table[128]; -}; - -static __inline__ int map_to_seg7(struct seg7_conversion_map *map, int c) -{ - return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL; -} - -#define SEG7_CONVERSION_MAP(_name, _map) \ - struct seg7_conversion_map _name = { .table = { _map } } - -/* - * It is recommended to use a facility that allows user space to redefine - * custom character sets for LCD devices. Please use a sysfs interface - * as described above. - */ -#define MAP_TO_SEG7_SYSFS_FILE "map_seg7" - -/******************************************************************************* - * ASCII conversion table - ******************************************************************************/ - -#define _SEG7(l,a,b,c,d,e,f,g) \ - ( a<',1,1,0,0,0,0,1), _SEG7('?',1,1,1,0,0,1,0),\ - _SEG7('@',1,1,0,1,1,1,1), - -#define _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ - _SEG7('A',1,1,1,0,1,1,1), _SEG7('B',1,1,1,1,1,1,1), _SEG7('C',1,0,0,1,1,1,0),\ - _SEG7('D',1,1,1,1,1,1,0), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ - _SEG7('G',1,1,1,1,0,1,1), _SEG7('H',0,1,1,0,1,1,1), _SEG7('I',0,1,1,0,0,0,0),\ - _SEG7('J',0,1,1,1,0,0,0), _SEG7('K',0,1,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ - _SEG7('M',1,1,1,0,1,1,0), _SEG7('N',1,1,1,0,1,1,0), _SEG7('O',1,1,1,1,1,1,0),\ - _SEG7('P',1,1,0,0,1,1,1), _SEG7('Q',1,1,1,1,1,1,0), _SEG7('R',1,1,1,0,1,1,1),\ - _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('U',0,1,1,1,1,1,0),\ - _SEG7('V',0,1,1,1,1,1,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ - _SEG7('Y',0,1,1,0,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), - -#define _MAP_91_96_ASCII_SEG7_SYMBOL \ - _SEG7('[',1,0,0,1,1,1,0), _SEG7('\\',0,0,1,0,0,1,1),_SEG7(']',1,1,1,1,0,0,0),\ - _SEG7('^',1,1,0,0,0,1,0), _SEG7('_',0,0,0,1,0,0,0), _SEG7('`',0,1,0,0,0,0,0), - -#define _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _SEG7('A',1,1,1,0,1,1,1), _SEG7('b',0,0,1,1,1,1,1), _SEG7('c',0,0,0,1,1,0,1),\ - _SEG7('d',0,1,1,1,1,0,1), _SEG7('E',1,0,0,1,1,1,1), _SEG7('F',1,0,0,0,1,1,1),\ - _SEG7('G',1,1,1,1,0,1,1), _SEG7('h',0,0,1,0,1,1,1), _SEG7('i',0,0,1,0,0,0,0),\ - _SEG7('j',0,0,1,1,0,0,0), _SEG7('k',0,0,1,0,1,1,1), _SEG7('L',0,0,0,1,1,1,0),\ - _SEG7('M',1,1,1,0,1,1,0), _SEG7('n',0,0,1,0,1,0,1), _SEG7('o',0,0,1,1,1,0,1),\ - _SEG7('P',1,1,0,0,1,1,1), _SEG7('q',1,1,1,0,0,1,1), _SEG7('r',0,0,0,0,1,0,1),\ - _SEG7('S',1,0,1,1,0,1,1), _SEG7('T',0,0,0,1,1,1,1), _SEG7('u',0,0,1,1,1,0,0),\ - _SEG7('v',0,0,1,1,1,0,0), _SEG7('W',0,1,1,1,1,1,1), _SEG7('X',0,1,1,0,1,1,1),\ - _SEG7('y',0,1,1,1,0,1,1), _SEG7('Z',1,1,0,1,1,0,1), - -#define _MAP_123_126_ASCII_SEG7_SYMBOL \ - _SEG7('{',1,0,0,1,1,1,0), _SEG7('|',0,0,0,0,1,1,0), _SEG7('}',1,1,1,1,0,0,0),\ - _SEG7('~',1,0,0,0,0,0,0), - -/* Maps */ - -/* This set tries to map as close as possible to the visible characteristics - * of the ASCII symbol, lowercase and uppercase letters may differ in - * presentation on the display. - */ -#define MAP_ASCII7SEG_ALPHANUM \ - _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ - _MAP_33_47_ASCII_SEG7_SYMBOL \ - _MAP_48_57_ASCII_SEG7_NUMERIC \ - _MAP_58_64_ASCII_SEG7_SYMBOL \ - _MAP_65_90_ASCII_SEG7_ALPHA_UPPR \ - _MAP_91_96_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_123_126_ASCII_SEG7_SYMBOL - -/* This set tries to map as close as possible to the symbolic characteristics - * of the ASCII character for maximum discrimination. - * For now this means all alpha chars are in lower case representations. - * (This for example facilitates the use of hex numbers with uppercase input.) - */ -#define MAP_ASCII7SEG_ALPHANUM_LC \ - _MAP_0_32_ASCII_SEG7_NON_PRINTABLE \ - _MAP_33_47_ASCII_SEG7_SYMBOL \ - _MAP_48_57_ASCII_SEG7_NUMERIC \ - _MAP_58_64_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_91_96_ASCII_SEG7_SYMBOL \ - _MAP_97_122_ASCII_SEG7_ALPHA_LOWER \ - _MAP_123_126_ASCII_SEG7_SYMBOL - -#define SEG7_DEFAULT_MAP(_name) \ - SEG7_CONVERSION_MAP(_name,MAP_ASCII7SEG_ALPHANUM) - -#endif /* MAP_TO_7SEGMENT_H */ - diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h deleted file mode 100644 index 8c22a8938642..000000000000 --- a/include/linux/matroxfb.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __LINUX_MATROXFB_H__ -#define __LINUX_MATROXFB_H__ - -#include -#include -#include -#include - -struct matroxioc_output_mode { - __u32 output; /* which output */ -#define MATROXFB_OUTPUT_PRIMARY 0x0000 -#define MATROXFB_OUTPUT_SECONDARY 0x0001 -#define MATROXFB_OUTPUT_DFP 0x0002 - __u32 mode; /* which mode */ -#define MATROXFB_OUTPUT_MODE_PAL 0x0001 -#define MATROXFB_OUTPUT_MODE_NTSC 0x0002 -#define MATROXFB_OUTPUT_MODE_MONITOR 0x0080 -}; -#define MATROXFB_SET_OUTPUT_MODE _IOW('n',0xFA,size_t) -#define MATROXFB_GET_OUTPUT_MODE _IOWR('n',0xFA,size_t) - -/* bitfield */ -#define MATROXFB_OUTPUT_CONN_PRIMARY (1 << MATROXFB_OUTPUT_PRIMARY) -#define MATROXFB_OUTPUT_CONN_SECONDARY (1 << MATROXFB_OUTPUT_SECONDARY) -#define MATROXFB_OUTPUT_CONN_DFP (1 << MATROXFB_OUTPUT_DFP) -/* connect these outputs to this framebuffer */ -#define MATROXFB_SET_OUTPUT_CONNECTION _IOW('n',0xF8,size_t) -/* which outputs are connected to this framebuffer */ -#define MATROXFB_GET_OUTPUT_CONNECTION _IOR('n',0xF8,size_t) -/* which outputs are available for this framebuffer */ -#define MATROXFB_GET_AVAILABLE_OUTPUTS _IOR('n',0xF9,size_t) -/* which outputs exist on this framebuffer */ -#define MATROXFB_GET_ALL_OUTPUTS _IOR('n',0xFB,size_t) - -enum matroxfb_ctrl_id { - MATROXFB_CID_TESTOUT = V4L2_CID_PRIVATE_BASE, - MATROXFB_CID_DEFLICKER, - MATROXFB_CID_LAST -}; - -#endif - diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 6c406845f7e2..3d15c838116c 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -6,295 +6,11 @@ * under the terms of the GNU General Public License version 2 as published * by the Free Software Foundation, incorporated herein by reference. */ - #ifndef __LINUX_MDIO_H__ #define __LINUX_MDIO_H__ -#include -#include - -/* MDIO Manageable Devices (MMDs). */ -#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ - * Physical Medium Dependent */ -#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ -#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ -#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ -#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ -#define MDIO_MMD_TC 6 /* Transmission Convergence */ -#define MDIO_MMD_AN 7 /* Auto-Negotiation */ -#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ -#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ -#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ - -/* Generic MDIO registers. */ -#define MDIO_CTRL1 MII_BMCR -#define MDIO_STAT1 MII_BMSR -#define MDIO_DEVID1 MII_PHYSID1 -#define MDIO_DEVID2 MII_PHYSID2 -#define MDIO_SPEED 4 /* Speed ability */ -#define MDIO_DEVS1 5 /* Devices in package */ -#define MDIO_DEVS2 6 -#define MDIO_CTRL2 7 /* 10G control 2 */ -#define MDIO_STAT2 8 /* 10G status 2 */ -#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ -#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ -#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ -#define MDIO_PKGID1 14 /* Package identifier */ -#define MDIO_PKGID2 15 -#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ -#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ -#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */ -#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */ -#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ -#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */ -#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */ - -/* Media-dependent registers. */ -#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ -#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ -#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. - * Lanes B-D are numbered 134-136. */ -#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ -#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ -#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ -#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ -#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ -#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ - -/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ -#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ -#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ -#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ -#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ -#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ -#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ - -/* Control register 1. */ -/* Enable extended speed selection */ -#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) -/* All speed selection bits */ -#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) -#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX -#define MDIO_CTRL1_LPOWER BMCR_PDOWN -#define MDIO_CTRL1_RESET BMCR_RESET -#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 -#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 -#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 -#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK -#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK -#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART -#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE -#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ -#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */ - -/* 10 Gb/s */ -#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) -/* 10PASS-TS/2BASE-TL */ -#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) - -/* Status register 1. */ -#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ -#define MDIO_STAT1_LSTATUS BMSR_LSTATUS -#define MDIO_STAT1_FAULT 0x0080 /* Fault */ -#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ -#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE -#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT -#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE -#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ -#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ - -/* Speed register. */ -#define MDIO_SPEED_10G 0x0001 /* 10G capable */ -#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ -#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ -#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ -#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ -#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ -#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ - -/* Device present registers. */ -#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) -#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) -#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) -#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) -#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) -#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) -#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) -#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) -#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) - -/* Control register 2. */ -#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ -#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ -#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ -#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ -#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ -#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ -#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ -#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ -#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ -#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ -#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ -#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ -#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ -#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ -#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ -#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ -#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ -#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ -#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ -#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ -#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ -#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ - -/* Status register 2. */ -#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ -#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ -#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ -#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ -#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ -#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ -#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ -#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ -#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ -#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ -#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ -#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ -#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ -#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ -#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ -#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ -#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ -#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ -#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ -#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ -#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ - -/* Transmit disable register. */ -#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ -#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ -#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ -#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ -#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ - -/* Receive signal detect register. */ -#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ -#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ -#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ -#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ -#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ - -/* Extended abilities register. */ -#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ -#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ -#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ -#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ -#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ -#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ -#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ -#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ -#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ - -/* PHY XGXS lane state register. */ -#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 -#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 -#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 -#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 -#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 - -/* PMA 10GBASE-T pair swap & polarity */ -#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ -#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ -#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ -#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ - -/* PMA 10GBASE-T TX power register. */ -#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ - -/* PMA 10GBASE-T SNR registers. */ -/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ -#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 -#define MDIO_PMA_10GBT_SNR_MAX 127 - -/* PMA 10GBASE-R FEC ability register. */ -#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ -#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ - -/* PCS 10GBASE-R/-T status register 1. */ -#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ - -/* PCS 10GBASE-R/-T status register 2. */ -#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff -#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 - -/* AN 10GBASE-T control register. */ -#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ - -/* AN 10GBASE-T status register. */ -#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ -#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ -#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ -#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ -#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ -#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ -#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ - -/* EEE Supported/Advertisement/LP Advertisement registers. - * - * EEE capability Register (3.20), Advertisement (7.60) and - * Link partner ability (7.61) registers have and can use the same identical - * bit masks. - */ -#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */ -#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */ -/* Note: the two defines above can be potentially used by the user-land - * and cannot remove them now. - * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros - * using the previous ones (that can be considered obsolete). - */ -#define MDIO_EEE_100TX MDIO_AN_EEE_ADV_100TX /* 100TX EEE cap */ -#define MDIO_EEE_1000T MDIO_AN_EEE_ADV_1000T /* 1000T EEE cap */ -#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ -#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ -#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ -#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ - -/* LASI RX_ALARM control/status registers. */ -#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ -#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ -#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ -#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ -#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ - -/* LASI TX_ALARM control/status registers. */ -#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ -#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ -#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ -#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ -#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ -#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ - -/* LASI control/status registers. */ -#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ -#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ -#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ - -/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ - -#define MDIO_PHY_ID_C45 0x8000 -#define MDIO_PHY_ID_PRTAD 0x03e0 -#define MDIO_PHY_ID_DEVAD 0x001f -#define MDIO_PHY_ID_C45_MASK \ - (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) - -static inline __u16 mdio_phy_id_c45(int prtad, int devad) -{ - return MDIO_PHY_ID_C45 | (prtad << 5) | devad; -} +#include -#ifdef __KERNEL__ static inline bool mdio_phy_id_is_c45(int phy_id) { @@ -460,5 +176,4 @@ static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv) return reg; } -#endif /* __KERNEL__ */ #endif /* __LINUX_MDIO_H__ */ diff --git a/include/linux/media.h b/include/linux/media.h deleted file mode 100644 index 0ef883327de2..000000000000 --- a/include/linux/media.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Multimedia device API - * - * Copyright (C) 2010 Nokia Corporation - * - * Contacts: Laurent Pinchart - * Sakari Ailus - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_MEDIA_H -#define __LINUX_MEDIA_H - -#include -#include -#include - -#define MEDIA_API_VERSION KERNEL_VERSION(0, 1, 0) - -struct media_device_info { - char driver[16]; - char model[32]; - char serial[40]; - char bus_info[32]; - __u32 media_version; - __u32 hw_revision; - __u32 driver_version; - __u32 reserved[31]; -}; - -#define MEDIA_ENT_ID_FLAG_NEXT (1 << 31) - -#define MEDIA_ENT_TYPE_SHIFT 16 -#define MEDIA_ENT_TYPE_MASK 0x00ff0000 -#define MEDIA_ENT_SUBTYPE_MASK 0x0000ffff - -#define MEDIA_ENT_T_DEVNODE (1 << MEDIA_ENT_TYPE_SHIFT) -#define MEDIA_ENT_T_DEVNODE_V4L (MEDIA_ENT_T_DEVNODE + 1) -#define MEDIA_ENT_T_DEVNODE_FB (MEDIA_ENT_T_DEVNODE + 2) -#define MEDIA_ENT_T_DEVNODE_ALSA (MEDIA_ENT_T_DEVNODE + 3) -#define MEDIA_ENT_T_DEVNODE_DVB (MEDIA_ENT_T_DEVNODE + 4) - -#define MEDIA_ENT_T_V4L2_SUBDEV (2 << MEDIA_ENT_TYPE_SHIFT) -#define MEDIA_ENT_T_V4L2_SUBDEV_SENSOR (MEDIA_ENT_T_V4L2_SUBDEV + 1) -#define MEDIA_ENT_T_V4L2_SUBDEV_FLASH (MEDIA_ENT_T_V4L2_SUBDEV + 2) -#define MEDIA_ENT_T_V4L2_SUBDEV_LENS (MEDIA_ENT_T_V4L2_SUBDEV + 3) - -#define MEDIA_ENT_FL_DEFAULT (1 << 0) - -struct media_entity_desc { - __u32 id; - char name[32]; - __u32 type; - __u32 revision; - __u32 flags; - __u32 group_id; - __u16 pads; - __u16 links; - - __u32 reserved[4]; - - union { - /* Node specifications */ - struct { - __u32 major; - __u32 minor; - } v4l; - struct { - __u32 major; - __u32 minor; - } fb; - struct { - __u32 card; - __u32 device; - __u32 subdevice; - } alsa; - int dvb; - - /* Sub-device specifications */ - /* Nothing needed yet */ - __u8 raw[184]; - }; -}; - -#define MEDIA_PAD_FL_SINK (1 << 0) -#define MEDIA_PAD_FL_SOURCE (1 << 1) - -struct media_pad_desc { - __u32 entity; /* entity ID */ - __u16 index; /* pad index */ - __u32 flags; /* pad flags */ - __u32 reserved[2]; -}; - -#define MEDIA_LNK_FL_ENABLED (1 << 0) -#define MEDIA_LNK_FL_IMMUTABLE (1 << 1) -#define MEDIA_LNK_FL_DYNAMIC (1 << 2) - -struct media_link_desc { - struct media_pad_desc source; - struct media_pad_desc sink; - __u32 flags; - __u32 reserved[2]; -}; - -struct media_links_enum { - __u32 entity; - /* Should have enough room for pads elements */ - struct media_pad_desc __user *pads; - /* Should have enough room for links elements */ - struct media_link_desc __user *links; - __u32 reserved[4]; -}; - -#define MEDIA_IOC_DEVICE_INFO _IOWR('|', 0x00, struct media_device_info) -#define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc) -#define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum) -#define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc) - -#endif /* __LINUX_MEDIA_H */ diff --git a/include/linux/mei.h b/include/linux/mei.h deleted file mode 100644 index bc0d8b69c49e..000000000000 --- a/include/linux/mei.h +++ /dev/null @@ -1,110 +0,0 @@ -/****************************************************************************** - * Intel Management Engine Interface (Intel MEI) Linux driver - * Intel MEI Interface Header - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation. - * linux-mei@linux.intel.com - * http://www.intel.com - * - * BSD LICENSE - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ - -#ifndef _LINUX_MEI_H -#define _LINUX_MEI_H - -#include - -/* - * This IOCTL is used to associate the current file descriptor with a - * FW Client (given by UUID). This opens a communication channel - * between a host client and a FW client. From this point every read and write - * will communicate with the associated FW client. - * Only in close() (file_operation release()) the communication between - * the clients is disconnected - * - * The IOCTL argument is a struct with a union that contains - * the input parameter and the output parameter for this IOCTL. - * - * The input parameter is UUID of the FW Client. - * The output parameter is the properties of the FW client - * (FW protocol version and max message size). - * - */ -#define IOCTL_MEI_CONNECT_CLIENT \ - _IOWR('H' , 0x01, struct mei_connect_client_data) - -/* - * Intel MEI client information struct - */ -struct mei_client { - __u32 max_msg_length; - __u8 protocol_version; - __u8 reserved[3]; -}; - -/* - * IOCTL Connect Client Data structure - */ -struct mei_connect_client_data { - union { - uuid_le in_client_uuid; - struct mei_client out_client_properties; - }; -}; - -#endif /* _LINUX_MEI_H */ diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index cec569325608..e5ccb9ddd90e 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -1,66 +1,10 @@ -#ifndef _LINUX_MEMPOLICY_H -#define _LINUX_MEMPOLICY_H 1 - -#include - /* * NUMA memory policies for Linux. * Copyright 2003,2004 Andi Kleen SuSE Labs */ +#ifndef _LINUX_MEMPOLICY_H +#define _LINUX_MEMPOLICY_H 1 -/* - * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are - * passed by the user to either set_mempolicy() or mbind() in an 'int' actual. - * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags. - */ - -/* Policies */ -enum { - MPOL_DEFAULT, - MPOL_PREFERRED, - MPOL_BIND, - MPOL_INTERLEAVE, - MPOL_MAX, /* always last member of enum */ -}; - -enum mpol_rebind_step { - MPOL_REBIND_ONCE, /* do rebind work at once(not by two step) */ - MPOL_REBIND_STEP1, /* first step(set all the newly nodes) */ - MPOL_REBIND_STEP2, /* second step(clean all the disallowed nodes)*/ - MPOL_REBIND_NSTEP, -}; - -/* Flags for set_mempolicy */ -#define MPOL_F_STATIC_NODES (1 << 15) -#define MPOL_F_RELATIVE_NODES (1 << 14) - -/* - * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to - * either set_mempolicy() or mbind(). - */ -#define MPOL_MODE_FLAGS (MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES) - -/* Flags for get_mempolicy */ -#define MPOL_F_NODE (1<<0) /* return next IL mode instead of node mask */ -#define MPOL_F_ADDR (1<<1) /* look up vma using address */ -#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */ - -/* Flags for mbind */ -#define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ -#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ -#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ -#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ - -/* - * Internal flags that share the struct mempolicy flags word with - * "mode flags". These flags are allocated from bit 0 up, as they - * are never OR'ed into the mode in mempolicy API arguments. - */ -#define MPOL_F_SHARED (1 << 0) /* identify shared policies */ -#define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ -#define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ - -#ifdef __KERNEL__ #include #include @@ -68,6 +12,7 @@ enum mpol_rebind_step { #include #include #include +#include struct mm_struct; @@ -379,6 +324,4 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, } #endif /* CONFIG_NUMA */ -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/meye.h b/include/linux/meye.h deleted file mode 100644 index 0dd49954f746..000000000000 --- a/include/linux/meye.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Motion Eye video4linux driver for Sony Vaio PictureBook - * - * Copyright (C) 2001-2003 Stelian Pop - * - * Copyright (C) 2001-2002 Alcôve - * - * Copyright (C) 2000 Andrew Tridgell - * - * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras. - * - * Some parts borrowed from various video4linux drivers, especially - * bttv-driver.c and zoran.c, see original files for credits. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _MEYE_H_ -#define _MEYE_H_ - -/****************************************************************************/ -/* Private API for handling mjpeg capture / playback. */ -/****************************************************************************/ - -struct meye_params { - unsigned char subsample; - unsigned char quality; - unsigned char sharpness; - unsigned char agc; - unsigned char picture; - unsigned char framerate; -}; - -/* query the extended parameters */ -#define MEYEIOC_G_PARAMS _IOR ('v', BASE_VIDIOC_PRIVATE+0, struct meye_params) -/* set the extended parameters */ -#define MEYEIOC_S_PARAMS _IOW ('v', BASE_VIDIOC_PRIVATE+1, struct meye_params) -/* queue a buffer for mjpeg capture */ -#define MEYEIOC_QBUF_CAPT _IOW ('v', BASE_VIDIOC_PRIVATE+2, int) -/* sync a previously queued mjpeg buffer */ -#define MEYEIOC_SYNC _IOWR('v', BASE_VIDIOC_PRIVATE+3, int) -/* get a still uncompressed snapshot */ -#define MEYEIOC_STILLCAPT _IO ('v', BASE_VIDIOC_PRIVATE+4) -/* get a jpeg compressed snapshot */ -#define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) - -/* V4L2 private controls */ -#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) - -#endif diff --git a/include/linux/mii.h b/include/linux/mii.h index 8ef3a7a11592..47492c9631b3 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -4,163 +4,12 @@ * * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com) */ - #ifndef __LINUX_MII_H__ #define __LINUX_MII_H__ -#include -#include - -/* Generic MII registers. */ -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */ -#define MII_MMD_DATA 0x0e /* MMD Access Data Register */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ - -/* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ -#define BMCR_PDOWN 0x0800 /* Enable low power state */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset to default state */ - -/* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ - -/* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ - -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) - -/* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ - -#define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) -#define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) - -/* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ - -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ - -/* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ - -/* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ -#define CTL1000_AS_MASTER 0x0800 -#define CTL1000_ENABLE_MASTER 0x1000 - -/* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ -#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ - -/* Flow control flags */ -#define FLOW_CTRL_TX 0x01 -#define FLOW_CTRL_RX 0x02 - -/* MMD Access Control register fields */ -#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/ -#define MII_MMD_CTRL_ADDR 0x0000 /* Address */ -#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */ -#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */ -#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */ - -/* This structure is used in all SIOCxMIIxxx ioctl calls */ -struct mii_ioctl_data { - __u16 phy_id; - __u16 reg_num; - __u16 val_in; - __u16 val_out; -}; - -#ifdef __KERNEL__ #include +#include struct ethtool_cmd; @@ -487,5 +336,4 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) return cap; } -#endif /* __KERNEL__ */ #endif /* __LINUX_MII_H__ */ diff --git a/include/linux/minix_fs.h b/include/linux/minix_fs.h deleted file mode 100644 index 13fe09e0576a..000000000000 --- a/include/linux/minix_fs.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef _LINUX_MINIX_FS_H -#define _LINUX_MINIX_FS_H - -#include -#include - -/* - * The minix filesystem constants/structures - */ - -/* - * Thanks to Kees J Bot for sending me the definitions of the new - * minix filesystem (aka V2) with bigger inodes and 32-bit block - * pointers. - */ - -#define MINIX_ROOT_INO 1 - -/* Not the same as the bogus LINK_MAX in . Oh well. */ -#define MINIX_LINK_MAX 250 -#define MINIX2_LINK_MAX 65530 - -#define MINIX_I_MAP_SLOTS 8 -#define MINIX_Z_MAP_SLOTS 64 -#define MINIX_VALID_FS 0x0001 /* Clean fs. */ -#define MINIX_ERROR_FS 0x0002 /* fs has errors. */ - -#define MINIX_INODES_PER_BLOCK ((BLOCK_SIZE)/(sizeof (struct minix_inode))) - -/* - * This is the original minix inode layout on disk. - * Note the 8-bit gid and atime and ctime. - */ -struct minix_inode { - __u16 i_mode; - __u16 i_uid; - __u32 i_size; - __u32 i_time; - __u8 i_gid; - __u8 i_nlinks; - __u16 i_zone[9]; -}; - -/* - * The new minix inode has all the time entries, as well as - * long block numbers and a third indirect block (7+1+1+1 - * instead of 7+1+1). Also, some previously 8-bit values are - * now 16-bit. The inode is now 64 bytes instead of 32. - */ -struct minix2_inode { - __u16 i_mode; - __u16 i_nlinks; - __u16 i_uid; - __u16 i_gid; - __u32 i_size; - __u32 i_atime; - __u32 i_mtime; - __u32 i_ctime; - __u32 i_zone[10]; -}; - -/* - * minix super-block data on disk - */ -struct minix_super_block { - __u16 s_ninodes; - __u16 s_nzones; - __u16 s_imap_blocks; - __u16 s_zmap_blocks; - __u16 s_firstdatazone; - __u16 s_log_zone_size; - __u32 s_max_size; - __u16 s_magic; - __u16 s_state; - __u32 s_zones; -}; - -/* - * V3 minix super-block data on disk - */ -struct minix3_super_block { - __u32 s_ninodes; - __u16 s_pad0; - __u16 s_imap_blocks; - __u16 s_zmap_blocks; - __u16 s_firstdatazone; - __u16 s_log_zone_size; - __u16 s_pad1; - __u32 s_max_size; - __u32 s_zones; - __u16 s_magic; - __u16 s_pad2; - __u16 s_blocksize; - __u8 s_disk_version; -}; - -struct minix_dir_entry { - __u16 inode; - char name[0]; -}; - -struct minix3_dir_entry { - __u32 inode; - char name[0]; -}; -#endif diff --git a/include/linux/mman.h b/include/linux/mman.h index 77cec2f45cb7..d09dde1e57fb 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -1,20 +1,11 @@ #ifndef _LINUX_MMAN_H #define _LINUX_MMAN_H -#include - -#define MREMAP_MAYMOVE 1 -#define MREMAP_FIXED 2 - -#define OVERCOMMIT_GUESS 0 -#define OVERCOMMIT_ALWAYS 1 -#define OVERCOMMIT_NEVER 2 - -#ifdef __KERNEL__ #include #include #include +#include extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; @@ -88,5 +79,4 @@ calc_vm_flag_bits(unsigned long flags) _calc_vm_trans(flags, MAP_DENYWRITE, VM_DENYWRITE ) | _calc_vm_trans(flags, MAP_LOCKED, VM_LOCKED ); } -#endif /* __KERNEL__ */ #endif /* _LINUX_MMAN_H */ diff --git a/include/linux/mmtimer.h b/include/linux/mmtimer.h deleted file mode 100644 index 884cabf16088..000000000000 --- a/include/linux/mmtimer.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Intel Multimedia Timer device interface - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved. - * - * This file should define an interface compatible with the IA-PC Multimedia - * Timers Draft Specification (rev. 0.97) from Intel. Note that some - * hardware may not be able to safely export its registers to userspace, - * so the ioctl interface should support all necessary functionality. - * - * 11/01/01 - jbarnes - initial revision - * 9/10/04 - Christoph Lameter - remove interrupt support - * 9/17/04 - jbarnes - remove test program, move some #defines to the driver - */ - -#ifndef _LINUX_MMTIMER_H -#define _LINUX_MMTIMER_H - -/* - * Breakdown of the ioctl's available. An 'optional' next to the command - * indicates that supporting this command is optional, while 'required' - * commands must be implemented if conformance is desired. - * - * MMTIMER_GETOFFSET - optional - * Should return the offset (relative to the start of the page where the - * registers are mapped) for the counter in question. - * - * MMTIMER_GETRES - required - * The resolution of the clock in femto (10^-15) seconds - * - * MMTIMER_GETFREQ - required - * Frequency of the clock in Hz - * - * MMTIMER_GETBITS - required - * Number of bits in the clock's counter - * - * MMTIMER_MMAPAVAIL - required - * Returns nonzero if the registers can be mmap'd into userspace, 0 otherwise - * - * MMTIMER_GETCOUNTER - required - * Gets the current value in the counter - */ -#define MMTIMER_IOCTL_BASE 'm' - -#define MMTIMER_GETOFFSET _IO(MMTIMER_IOCTL_BASE, 0) -#define MMTIMER_GETRES _IOR(MMTIMER_IOCTL_BASE, 1, unsigned long) -#define MMTIMER_GETFREQ _IOR(MMTIMER_IOCTL_BASE, 2, unsigned long) -#define MMTIMER_GETBITS _IO(MMTIMER_IOCTL_BASE, 4) -#define MMTIMER_MMAPAVAIL _IO(MMTIMER_IOCTL_BASE, 6) -#define MMTIMER_GETCOUNTER _IOR(MMTIMER_IOCTL_BASE, 9, unsigned long) - -#endif /* _LINUX_MMTIMER_H */ diff --git a/include/linux/mqueue.h b/include/linux/mqueue.h deleted file mode 100644 index 8b5a79615fbf..000000000000 --- a/include/linux/mqueue.h +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright (C) 2003 Krzysztof Benedyczak & Michal Wronski - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - It is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this software; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA - 02111-1307 USA. */ - -#ifndef _LINUX_MQUEUE_H -#define _LINUX_MQUEUE_H - -#define MQ_PRIO_MAX 32768 -/* per-uid limit of kernel memory used by mqueue, in bytes */ -#define MQ_BYTES_MAX 819200 - -struct mq_attr { - long mq_flags; /* message queue flags */ - long mq_maxmsg; /* maximum number of messages */ - long mq_msgsize; /* maximum message size */ - long mq_curmsgs; /* number of messages currently queued */ - long __reserved[4]; /* ignored for input, zeroed for output */ -}; - -/* - * SIGEV_THREAD implementation: - * SIGEV_THREAD must be implemented in user space. If SIGEV_THREAD is passed - * to mq_notify, then - * - sigev_signo must be the file descriptor of an AF_NETLINK socket. It's not - * necessary that the socket is bound. - * - sigev_value.sival_ptr must point to a cookie that is NOTIFY_COOKIE_LEN - * bytes long. - * If the notification is triggered, then the cookie is sent to the netlink - * socket. The last byte of the cookie is replaced with the NOTIFY_?? codes: - * NOTIFY_WOKENUP if the notification got triggered, NOTIFY_REMOVED if it was - * removed, either due to a close() on the message queue fd or due to a - * mq_notify() that removed the notification. - */ -#define NOTIFY_NONE 0 -#define NOTIFY_WOKENUP 1 -#define NOTIFY_REMOVED 2 - -#define NOTIFY_COOKIE_LEN 32 - -#endif diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 46caaf44339d..ea00d9162ee5 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -1,138 +1,10 @@ #ifndef __LINUX_MROUTE_H #define __LINUX_MROUTE_H -#include -#include -#ifdef __KERNEL__ #include -#endif - -/* - * Based on the MROUTING 3.5 defines primarily to keep - * source compatibility with BSD. - * - * See the mrouted code for the original history. - * - * Protocol Independent Multicast (PIM) data structures included - * Carlos Picoto (cap@di.fc.ul.pt) - * - */ - -#define MRT_BASE 200 -#define MRT_INIT (MRT_BASE) /* Activate the kernel mroute code */ -#define MRT_DONE (MRT_BASE+1) /* Shutdown the kernel mroute */ -#define MRT_ADD_VIF (MRT_BASE+2) /* Add a virtual interface */ -#define MRT_DEL_VIF (MRT_BASE+3) /* Delete a virtual interface */ -#define MRT_ADD_MFC (MRT_BASE+4) /* Add a multicast forwarding entry */ -#define MRT_DEL_MFC (MRT_BASE+5) /* Delete a multicast forwarding entry */ -#define MRT_VERSION (MRT_BASE+6) /* Get the kernel multicast version */ -#define MRT_ASSERT (MRT_BASE+7) /* Activate PIM assert mode */ -#define MRT_PIM (MRT_BASE+8) /* enable PIM code */ -#define MRT_TABLE (MRT_BASE+9) /* Specify mroute table ID */ - -#define SIOCGETVIFCNT SIOCPROTOPRIVATE /* IP protocol privates */ -#define SIOCGETSGCNT (SIOCPROTOPRIVATE+1) -#define SIOCGETRPF (SIOCPROTOPRIVATE+2) - -#define MAXVIFS 32 -typedef unsigned long vifbitmap_t; /* User mode code depends on this lot */ -typedef unsigned short vifi_t; -#define ALL_VIFS ((vifi_t)(-1)) - -/* - * Same idea as select - */ - -#define VIFM_SET(n,m) ((m)|=(1<<(n))) -#define VIFM_CLR(n,m) ((m)&=~(1<<(n))) -#define VIFM_ISSET(n,m) ((m)&(1<<(n))) -#define VIFM_CLRALL(m) ((m)=0) -#define VIFM_COPY(mfrom,mto) ((mto)=(mfrom)) -#define VIFM_SAME(m1,m2) ((m1)==(m2)) - -/* - * Passed by mrouted for an MRT_ADD_VIF - again we use the - * mrouted 3.6 structures for compatibility - */ - -struct vifctl { - vifi_t vifc_vifi; /* Index of VIF */ - unsigned char vifc_flags; /* VIFF_ flags */ - unsigned char vifc_threshold; /* ttl limit */ - unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ - union { - struct in_addr vifc_lcl_addr; /* Local interface address */ - int vifc_lcl_ifindex; /* Local interface index */ - }; - struct in_addr vifc_rmt_addr; /* IPIP tunnel addr */ -}; - -#define VIFF_TUNNEL 0x1 /* IPIP tunnel */ -#define VIFF_SRCRT 0x2 /* NI */ -#define VIFF_REGISTER 0x4 /* register vif */ -#define VIFF_USE_IFINDEX 0x8 /* use vifc_lcl_ifindex instead of - vifc_lcl_addr to find an interface */ - -/* - * Cache manipulation structures for mrouted and PIMd - */ - -struct mfcctl { - struct in_addr mfcc_origin; /* Origin of mcast */ - struct in_addr mfcc_mcastgrp; /* Group in question */ - vifi_t mfcc_parent; /* Where it arrived */ - unsigned char mfcc_ttls[MAXVIFS]; /* Where it is going */ - unsigned int mfcc_pkt_cnt; /* pkt count for src-grp */ - unsigned int mfcc_byte_cnt; - unsigned int mfcc_wrong_if; - int mfcc_expire; -}; - -/* - * Group count retrieval for mrouted - */ - -struct sioc_sg_req { - struct in_addr src; - struct in_addr grp; - unsigned long pktcnt; - unsigned long bytecnt; - unsigned long wrong_if; -}; - -/* - * To get vif packet counts - */ - -struct sioc_vif_req { - vifi_t vifi; /* Which iface */ - unsigned long icount; /* In packets */ - unsigned long ocount; /* Out packets */ - unsigned long ibytes; /* In bytes */ - unsigned long obytes; /* Out bytes */ -}; - -/* - * This is the format the mroute daemon expects to see IGMP control - * data. Magically happens to be like an IP packet as per the original - */ - -struct igmpmsg { - __u32 unused1,unused2; - unsigned char im_msgtype; /* What is this */ - unsigned char im_mbz; /* Must be zero */ - unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */ - unsigned char unused3; - struct in_addr im_src,im_dst; -}; - -/* - * That's all usermode folks - */ - -#ifdef __KERNEL__ #include #include +#include #ifdef CONFIG_IP_MROUTE static inline int ip_mroute_opt(int opt) @@ -228,24 +100,8 @@ struct mfc_cache { #define MFC_HASH(a,b) ((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1)) #endif -#endif - - -#define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */ - -/* - * Pseudo messages used by mrouted - */ - -#define IGMPMSG_NOCACHE 1 /* Kern cache fill request to mrouted */ -#define IGMPMSG_WRONGVIF 2 /* For PIM assert processing (unused) */ -#define IGMPMSG_WHOLEPKT 3 /* For PIM Register processing */ - -#ifdef __KERNEL__ struct rtmsg; extern int ipmr_get_route(struct net *net, struct sk_buff *skb, __be32 saddr, __be32 daddr, struct rtmsg *rtm, int nowait); #endif - -#endif diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 6d8c7251eb8d..a223561ba12e 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -1,123 +1,11 @@ #ifndef __LINUX_MROUTE6_H #define __LINUX_MROUTE6_H -#include -#include - -/* - * Based on the MROUTING 3.5 defines primarily to keep - * source compatibility with BSD. - * - * See the pim6sd code for the original history. - * - * Protocol Independent Multicast (PIM) data structures included - * Carlos Picoto (cap@di.fc.ul.pt) - * - */ - -#define MRT6_BASE 200 -#define MRT6_INIT (MRT6_BASE) /* Activate the kernel mroute code */ -#define MRT6_DONE (MRT6_BASE+1) /* Shutdown the kernel mroute */ -#define MRT6_ADD_MIF (MRT6_BASE+2) /* Add a virtual interface */ -#define MRT6_DEL_MIF (MRT6_BASE+3) /* Delete a virtual interface */ -#define MRT6_ADD_MFC (MRT6_BASE+4) /* Add a multicast forwarding entry */ -#define MRT6_DEL_MFC (MRT6_BASE+5) /* Delete a multicast forwarding entry */ -#define MRT6_VERSION (MRT6_BASE+6) /* Get the kernel multicast version */ -#define MRT6_ASSERT (MRT6_BASE+7) /* Activate PIM assert mode */ -#define MRT6_PIM (MRT6_BASE+8) /* enable PIM code */ -#define MRT6_TABLE (MRT6_BASE+9) /* Specify mroute table ID */ - -#define SIOCGETMIFCNT_IN6 SIOCPROTOPRIVATE /* IP protocol privates */ -#define SIOCGETSGCNT_IN6 (SIOCPROTOPRIVATE+1) -#define SIOCGETRPF (SIOCPROTOPRIVATE+2) - -#define MAXMIFS 32 -typedef unsigned long mifbitmap_t; /* User mode code depends on this lot */ -typedef unsigned short mifi_t; -#define ALL_MIFS ((mifi_t)(-1)) - -#ifndef IF_SETSIZE -#define IF_SETSIZE 256 -#endif - -typedef __u32 if_mask; -#define NIFBITS (sizeof(if_mask) * 8) /* bits per mask */ - -#if !defined(__KERNEL__) -#if !defined(DIV_ROUND_UP) -#define DIV_ROUND_UP(x,y) (((x) + ((y) - 1)) / (y)) -#endif -#endif - -typedef struct if_set { - if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)]; -} if_set; - -#define IF_SET(n, p) ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS))) -#define IF_CLR(n, p) ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS))) -#define IF_ISSET(n, p) ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS))) -#define IF_COPY(f, t) bcopy(f, t, sizeof(*(f))) -#define IF_ZERO(p) bzero(p, sizeof(*(p))) - -/* - * Passed by mrouted for an MRT_ADD_MIF - again we use the - * mrouted 3.6 structures for compatibility - */ - -struct mif6ctl { - mifi_t mif6c_mifi; /* Index of MIF */ - unsigned char mif6c_flags; /* MIFF_ flags */ - unsigned char vifc_threshold; /* ttl limit */ - __u16 mif6c_pifi; /* the index of the physical IF */ - unsigned int vifc_rate_limit; /* Rate limiter values (NI) */ -}; - -#define MIFF_REGISTER 0x1 /* register vif */ - -/* - * Cache manipulation structures for mrouted and PIMd - */ - -struct mf6cctl { - struct sockaddr_in6 mf6cc_origin; /* Origin of mcast */ - struct sockaddr_in6 mf6cc_mcastgrp; /* Group in question */ - mifi_t mf6cc_parent; /* Where it arrived */ - struct if_set mf6cc_ifset; /* Where it is going */ -}; - -/* - * Group count retrieval for pim6sd - */ - -struct sioc_sg_req6 { - struct sockaddr_in6 src; - struct sockaddr_in6 grp; - unsigned long pktcnt; - unsigned long bytecnt; - unsigned long wrong_if; -}; - -/* - * To get vif packet counts - */ - -struct sioc_mif_req6 { - mifi_t mifi; /* Which iface */ - unsigned long icount; /* In packets */ - unsigned long ocount; /* Out packets */ - unsigned long ibytes; /* In bytes */ - unsigned long obytes; /* Out bytes */ -}; - -/* - * That's all usermode folks - */ - -#ifdef __KERNEL__ #include #include /* for struct sk_buff_head */ #include +#include #ifdef CONFIG_IPV6_MROUTE static inline int ip6_mroute_opt(int opt) @@ -225,9 +113,6 @@ struct mfc6_cache { #define MFC_ASSERT_THRESH (3*HZ) /* Maximal freq. of asserts */ -#endif - -#ifdef __KERNEL__ struct rtmsg; extern int ip6mr_get_route(struct net *net, struct sk_buff *skb, struct rtmsg *rtm, int nowait); @@ -246,24 +131,3 @@ static inline int ip6mr_sk_done(struct sock *sk) } #endif #endif - -/* - * Structure used to communicate from kernel to multicast router. - * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{} - * used for IPv4 implementation). This is because this structure will be passed via an - * IPv6 raw socket, on which an application will only receiver the payload i.e the data after - * the IPv6 header and all the extension headers. (See section 3 of RFC 3542) - */ - -struct mrt6msg { -#define MRT6MSG_NOCACHE 1 -#define MRT6MSG_WRONGMIF 2 -#define MRT6MSG_WHOLEPKT 3 /* used for use level encap */ - __u8 im6_mbz; /* must be zero */ - __u8 im6_msgtype; /* what type of message */ - __u16 im6_mif; /* mif rec'd on */ - __u32 im6_pad; /* padding for 64 bit arch */ - struct in6_addr im6_src, im6_dst; -}; - -#endif diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index 11cc2ac67e75..e1b163f912fb 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -1,174 +1,11 @@ #ifndef _LINUX_MSDOS_FS_H #define _LINUX_MSDOS_FS_H -#include -#include -#include +#include -/* - * The MS-DOS filesystem constants/structures - */ - -#define SECTOR_SIZE 512 /* sector size (bytes) */ -#define SECTOR_BITS 9 /* log2(SECTOR_SIZE) */ -#define MSDOS_DPB (MSDOS_DPS) /* dir entries per block */ -#define MSDOS_DPB_BITS 4 /* log2(MSDOS_DPB) */ -#define MSDOS_DPS (SECTOR_SIZE / sizeof(struct msdos_dir_entry)) -#define MSDOS_DPS_BITS 4 /* log2(MSDOS_DPS) */ -#define MSDOS_LONGNAME 256 /* maximum name length */ -#define CF_LE_W(v) le16_to_cpu(v) -#define CF_LE_L(v) le32_to_cpu(v) -#define CT_LE_W(v) cpu_to_le16(v) -#define CT_LE_L(v) cpu_to_le32(v) - -#define MSDOS_ROOT_INO 1 /* The root inode number */ -#define MSDOS_FSINFO_INO 2 /* Used for managing the FSINFO block */ - -#define MSDOS_DIR_BITS 5 /* log2(sizeof(struct msdos_dir_entry)) */ - -/* directory limit */ -#define FAT_MAX_DIR_ENTRIES (65536) -#define FAT_MAX_DIR_SIZE (FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS) - -#define ATTR_NONE 0 /* no attribute bits */ -#define ATTR_RO 1 /* read-only */ -#define ATTR_HIDDEN 2 /* hidden */ -#define ATTR_SYS 4 /* system */ -#define ATTR_VOLUME 8 /* volume label */ -#define ATTR_DIR 16 /* directory */ -#define ATTR_ARCH 32 /* archived */ - -/* attribute bits that are copied "as is" */ -#define ATTR_UNUSED (ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN) -/* bits that are used by the Windows 95/Windows NT extended FAT */ -#define ATTR_EXT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) - -#define CASE_LOWER_BASE 8 /* base is lower case */ -#define CASE_LOWER_EXT 16 /* extension is lower case */ - -#define DELETED_FLAG 0xe5 /* marks file as deleted when in name[0] */ -#define IS_FREE(n) (!*(n) || *(n) == DELETED_FLAG) - -#define FAT_LFN_LEN 255 /* maximum long name length */ -#define MSDOS_NAME 11 /* maximum name length */ -#define MSDOS_SLOTS 21 /* max # of slots for short and long names */ -#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */ -#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */ - -#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \ - MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x)) - -/* start of data cluster's entry (number of reserved clusters) */ -#define FAT_START_ENT 2 - -/* maximum number of clusters */ -#define MAX_FAT12 0xFF4 -#define MAX_FAT16 0xFFF4 -#define MAX_FAT32 0x0FFFFFF6 -#define MAX_FAT(s) (MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \ - MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12) - -/* bad cluster mark */ -#define BAD_FAT12 0xFF7 -#define BAD_FAT16 0xFFF7 -#define BAD_FAT32 0x0FFFFFF7 - -/* standard EOF */ -#define EOF_FAT12 0xFFF -#define EOF_FAT16 0xFFFF -#define EOF_FAT32 0x0FFFFFFF - -#define FAT_ENT_FREE (0) -#define FAT_ENT_BAD (BAD_FAT32) -#define FAT_ENT_EOF (EOF_FAT32) - -#define FAT_FSINFO_SIG1 0x41615252 -#define FAT_FSINFO_SIG2 0x61417272 -#define IS_FSINFO(x) (le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \ - && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2) - -struct __fat_dirent { - long d_ino; - __kernel_off_t d_off; - unsigned short d_reclen; - char d_name[256]; /* We must not include limits.h! */ -}; - -/* - * ioctl commands - */ -#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct __fat_dirent[2]) -#define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct __fat_dirent[2]) -/* has used 0x72 ('r') in collision, so skip a few */ -#define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32) -#define FAT_IOCTL_SET_ATTRIBUTES _IOW('r', 0x11, __u32) - -struct fat_boot_sector { - __u8 ignored[3]; /* Boot strap short or near jump */ - __u8 system_id[8]; /* Name - can be used to special case - partition manager volumes */ - __u8 sector_size[2]; /* bytes per logical sector */ - __u8 sec_per_clus; /* sectors/cluster */ - __le16 reserved; /* reserved sectors */ - __u8 fats; /* number of FATs */ - __u8 dir_entries[2]; /* root directory entries */ - __u8 sectors[2]; /* number of sectors */ - __u8 media; /* media code */ - __le16 fat_length; /* sectors/FAT */ - __le16 secs_track; /* sectors per track */ - __le16 heads; /* number of heads */ - __le32 hidden; /* hidden sectors (unused) */ - __le32 total_sect; /* number of sectors (if sectors == 0) */ - - /* The following fields are only used by FAT32 */ - __le32 fat32_length; /* sectors/FAT */ - __le16 flags; /* bit 8: fat mirroring, low 4: active fat */ - __u8 version[2]; /* major, minor filesystem version */ - __le32 root_cluster; /* first cluster in root directory */ - __le16 info_sector; /* filesystem info sector */ - __le16 backup_boot; /* backup boot sector */ - __le16 reserved2[6]; /* Unused */ -}; - -struct fat_boot_fsinfo { - __le32 signature1; /* 0x41615252L */ - __le32 reserved1[120]; /* Nothing as far as I can tell */ - __le32 signature2; /* 0x61417272L */ - __le32 free_clusters; /* Free cluster count. -1 if unknown */ - __le32 next_cluster; /* Most recently allocated cluster */ - __le32 reserved2[4]; -}; - -struct msdos_dir_entry { - __u8 name[MSDOS_NAME];/* name and extension */ - __u8 attr; /* attribute bits */ - __u8 lcase; /* Case for base and extension */ - __u8 ctime_cs; /* Creation time, centiseconds (0-199) */ - __le16 ctime; /* Creation time */ - __le16 cdate; /* Creation date */ - __le16 adate; /* Last access date */ - __le16 starthi; /* High 16 bits of cluster in FAT32 */ - __le16 time,date,start;/* time, date and first cluster */ - __le32 size; /* file size (in bytes) */ -}; - -/* Up to 13 characters of the name */ -struct msdos_dir_slot { - __u8 id; /* sequence number for slot */ - __u8 name0_4[10]; /* first 5 characters in name */ - __u8 attr; /* attribute byte */ - __u8 reserved; /* always 0 */ - __u8 alias_checksum; /* checksum for 8.3 alias */ - __u8 name5_10[12]; /* 6 more characters in name */ - __le16 start; /* starting cluster number, 0 in long slots */ - __u8 name11_12[4]; /* last 2 characters in name */ -}; - -#ifdef __KERNEL__ /* media of boot sector */ static inline int fat_valid_media(u8 media) { return 0xf8 <= media || media == 0xf0; } -#endif /* !__KERNEL__ */ #endif /* !_LINUX_MSDOS_FS_H */ diff --git a/include/linux/msg.h b/include/linux/msg.h index 56abf1558fdd..7a4b9e97d29a 100644 --- a/include/linux/msg.h +++ b/include/linux/msg.h @@ -1,78 +1,8 @@ #ifndef _LINUX_MSG_H #define _LINUX_MSG_H -#include - -/* ipcs ctl commands */ -#define MSG_STAT 11 -#define MSG_INFO 12 - -/* msgrcv options */ -#define MSG_NOERROR 010000 /* no error if message is too big */ -#define MSG_EXCEPT 020000 /* recv any msg except of specified type.*/ - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct msqid_ds { - struct ipc_perm msg_perm; - struct msg *msg_first; /* first message on queue,unused */ - struct msg *msg_last; /* last message in queue,unused */ - __kernel_time_t msg_stime; /* last msgsnd time */ - __kernel_time_t msg_rtime; /* last msgrcv time */ - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_lcbytes; /* Reuse junk fields for 32 bit */ - unsigned long msg_lqbytes; /* ditto */ - unsigned short msg_cbytes; /* current number of bytes on queue */ - unsigned short msg_qnum; /* number of messages in queue */ - unsigned short msg_qbytes; /* max number of bytes on queue */ - __kernel_ipc_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_ipc_pid_t msg_lrpid; /* last receive pid */ -}; - -/* Include the definition of msqid64_ds */ -#include - -/* message buffer for msgsnd and msgrcv calls */ -struct msgbuf { - long mtype; /* type of message */ - char mtext[1]; /* message text */ -}; - -/* buffer for msgctl calls IPC_INFO, MSG_INFO */ -struct msginfo { - int msgpool; - int msgmap; - int msgmax; - int msgmnb; - int msgmni; - int msgssz; - int msgtql; - unsigned short msgseg; -}; - -/* - * Scaling factor to compute msgmni: - * the memory dedicated to msg queues (msgmni * msgmnb) should occupy - * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c): - * up to 8MB : msgmni = 16 (MSGMNI) - * 4 GB : msgmni = 8K - * more than 16 GB : msgmni = 32K (IPCMNI) - */ -#define MSG_MEM_SCALE 32 - -#define MSGMNI 16 /* <= IPCMNI */ /* max # of msg queue identifiers */ -#define MSGMAX 8192 /* <= INT_MAX */ /* max size of message (bytes) */ -#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */ - -/* unused */ -#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */ -#define MSGTQL MSGMNB /* number of system message headers */ -#define MSGMAP MSGMNB /* number of entries in message map */ -#define MSGSSZ 16 /* message segment size */ -#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */ -#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff) - -#ifdef __KERNEL__ #include +#include /* one msg_msg structure for each message */ struct msg_msg { @@ -107,6 +37,4 @@ extern long do_msgsnd(int msqid, long mtype, void __user *mtext, extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext, size_t msgsz, long msgtyp, int msgflg); -#endif /* __KERNEL__ */ - #endif /* _LINUX_MSG_H */ diff --git a/include/linux/mtio.h b/include/linux/mtio.h deleted file mode 100644 index 18543e2db06f..000000000000 --- a/include/linux/mtio.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * linux/mtio.h header file for Linux. Written by H. Bergman - * - * Modified for special ioctls provided by zftape in September 1997 - * by C.-J. Heine. - */ - -#ifndef _LINUX_MTIO_H -#define _LINUX_MTIO_H - -#include -#include - -/* - * Structures and definitions for mag tape io control commands - */ - -/* structure for MTIOCTOP - mag tape op command */ -struct mtop { - short mt_op; /* operations defined below */ - int mt_count; /* how many of them */ -}; - -/* Magnetic Tape operations [Not all operations supported by all drivers]: */ -#define MTRESET 0 /* +reset drive in case of problems */ -#define MTFSF 1 /* forward space over FileMark, - * position at first record of next file - */ -#define MTBSF 2 /* backward space FileMark (position before FM) */ -#define MTFSR 3 /* forward space record */ -#define MTBSR 4 /* backward space record */ -#define MTWEOF 5 /* write an end-of-file record (mark) */ -#define MTREW 6 /* rewind */ -#define MTOFFL 7 /* rewind and put the drive offline (eject?) */ -#define MTNOP 8 /* no op, set status only (read with MTIOCGET) */ -#define MTRETEN 9 /* retension tape */ -#define MTBSFM 10 /* +backward space FileMark, position at FM */ -#define MTFSFM 11 /* +forward space FileMark, position at FM */ -#define MTEOM 12 /* goto end of recorded media (for appending files). - * MTEOM positions after the last FM, ready for - * appending another file. - */ -#define MTERASE 13 /* erase tape -- be careful! */ - -#define MTRAS1 14 /* run self test 1 (nondestructive) */ -#define MTRAS2 15 /* run self test 2 (destructive) */ -#define MTRAS3 16 /* reserved for self test 3 */ - -#define MTSETBLK 20 /* set block length (SCSI) */ -#define MTSETDENSITY 21 /* set tape density (SCSI) */ -#define MTSEEK 22 /* seek to block (Tandberg, etc.) */ -#define MTTELL 23 /* tell block (Tandberg, etc.) */ -#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */ - /* ordinary buffered operation with code 1 */ -#define MTFSS 25 /* space forward over setmarks */ -#define MTBSS 26 /* space backward over setmarks */ -#define MTWSM 27 /* write setmarks */ - -#define MTLOCK 28 /* lock the drive door */ -#define MTUNLOCK 29 /* unlock the drive door */ -#define MTLOAD 30 /* execute the SCSI load command */ -#define MTUNLOAD 31 /* execute the SCSI unload command */ -#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */ -#define MTSETPART 33 /* Change the active tape partition */ -#define MTMKPART 34 /* Format the tape with one or two partitions */ -#define MTWEOFI 35 /* write an end-of-file record (mark) in immediate mode */ - -/* structure for MTIOCGET - mag tape get status command */ - -struct mtget { - long mt_type; /* type of magtape device */ - long mt_resid; /* residual count: (not sure) - * number of bytes ignored, or - * number of files not skipped, or - * number of records not skipped. - */ - /* the following registers are device dependent */ - long mt_dsreg; /* status register */ - long mt_gstat; /* generic (device independent) status */ - long mt_erreg; /* error register */ - /* The next two fields are not always used */ - __kernel_daddr_t mt_fileno; /* number of current file on tape */ - __kernel_daddr_t mt_blkno; /* current block number */ -}; - - - -/* - * Constants for mt_type. Not all of these are supported, - * and these are not all of the ones that are supported. - */ -#define MT_ISUNKNOWN 0x01 -#define MT_ISQIC02 0x02 /* Generic QIC-02 tape streamer */ -#define MT_ISWT5150 0x03 /* Wangtek 5150EQ, QIC-150, QIC-02 */ -#define MT_ISARCHIVE_5945L2 0x04 /* Archive 5945L-2, QIC-24, QIC-02? */ -#define MT_ISCMSJ500 0x05 /* CMS Jumbo 500 (QIC-02?) */ -#define MT_ISTDC3610 0x06 /* Tandberg 6310, QIC-24 */ -#define MT_ISARCHIVE_VP60I 0x07 /* Archive VP60i, QIC-02 */ -#define MT_ISARCHIVE_2150L 0x08 /* Archive Viper 2150L */ -#define MT_ISARCHIVE_2060L 0x09 /* Archive Viper 2060L */ -#define MT_ISARCHIVESC499 0x0A /* Archive SC-499 QIC-36 controller */ -#define MT_ISQIC02_ALL_FEATURES 0x0F /* Generic QIC-02 with all features */ -#define MT_ISWT5099EEN24 0x11 /* Wangtek 5099-een24, 60MB, QIC-24 */ -#define MT_ISTEAC_MT2ST 0x12 /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */ -#define MT_ISEVEREX_FT40A 0x32 /* Everex FT40A (QIC-40) */ -#define MT_ISDDS1 0x51 /* DDS device without partitions */ -#define MT_ISDDS2 0x52 /* DDS device with partitions */ -#define MT_ISONSTREAM_SC 0x61 /* OnStream SCSI tape drives (SC-x0) - and SCSI emulated (DI, DP, USB) */ -#define MT_ISSCSI1 0x71 /* Generic ANSI SCSI-1 tape unit */ -#define MT_ISSCSI2 0x72 /* Generic ANSI SCSI-2 tape unit */ - -/* QIC-40/80/3010/3020 ftape supported drives. - * 20bit vendor ID + 0x800000 (see ftape-vendors.h) - */ -#define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ -#define MT_ISFTAPE_FLAG 0x800000 - - -/* structure for MTIOCPOS - mag tape get position command */ - -struct mtpos { - long mt_blkno; /* current block number */ -}; - - -/* mag tape io control commands */ -#define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ -#define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ -#define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ - - -/* Generic Mag Tape (device independent) status macros for examining - * mt_gstat -- HP-UX compatible. - * There is room for more generic status bits here, but I don't - * know which of them are reserved. At least three or so should - * be added to make this really useful. - */ -#define GMT_EOF(x) ((x) & 0x80000000) -#define GMT_BOT(x) ((x) & 0x40000000) -#define GMT_EOT(x) ((x) & 0x20000000) -#define GMT_SM(x) ((x) & 0x10000000) /* DDS setmark */ -#define GMT_EOD(x) ((x) & 0x08000000) /* DDS EOD */ -#define GMT_WR_PROT(x) ((x) & 0x04000000) -/* #define GMT_ ? ((x) & 0x02000000) */ -#define GMT_ONLINE(x) ((x) & 0x01000000) -#define GMT_D_6250(x) ((x) & 0x00800000) -#define GMT_D_1600(x) ((x) & 0x00400000) -#define GMT_D_800(x) ((x) & 0x00200000) -/* #define GMT_ ? ((x) & 0x00100000) */ -/* #define GMT_ ? ((x) & 0x00080000) */ -#define GMT_DR_OPEN(x) ((x) & 0x00040000) /* door open (no tape) */ -/* #define GMT_ ? ((x) & 0x00020000) */ -#define GMT_IM_REP_EN(x) ((x) & 0x00010000) /* immediate report mode */ -#define GMT_CLN(x) ((x) & 0x00008000) /* cleaning requested */ -/* 15 generic status bits unused */ - - -/* SCSI-tape specific definitions */ -/* Bitfield shifts in the status */ -#define MT_ST_BLKSIZE_SHIFT 0 -#define MT_ST_BLKSIZE_MASK 0xffffff -#define MT_ST_DENSITY_SHIFT 24 -#define MT_ST_DENSITY_MASK 0xff000000 - -#define MT_ST_SOFTERR_SHIFT 0 -#define MT_ST_SOFTERR_MASK 0xffff - -/* Bitfields for the MTSETDRVBUFFER ioctl */ -#define MT_ST_OPTIONS 0xf0000000 -#define MT_ST_BOOLEANS 0x10000000 -#define MT_ST_SETBOOLEANS 0x30000000 -#define MT_ST_CLEARBOOLEANS 0x40000000 -#define MT_ST_WRITE_THRESHOLD 0x20000000 -#define MT_ST_DEF_BLKSIZE 0x50000000 -#define MT_ST_DEF_OPTIONS 0x60000000 -#define MT_ST_TIMEOUTS 0x70000000 -#define MT_ST_SET_TIMEOUT (MT_ST_TIMEOUTS | 0x000000) -#define MT_ST_SET_LONG_TIMEOUT (MT_ST_TIMEOUTS | 0x100000) -#define MT_ST_SET_CLN 0x80000000 - -#define MT_ST_BUFFER_WRITES 0x1 -#define MT_ST_ASYNC_WRITES 0x2 -#define MT_ST_READ_AHEAD 0x4 -#define MT_ST_DEBUGGING 0x8 -#define MT_ST_TWO_FM 0x10 -#define MT_ST_FAST_MTEOM 0x20 -#define MT_ST_AUTO_LOCK 0x40 -#define MT_ST_DEF_WRITES 0x80 -#define MT_ST_CAN_BSR 0x100 -#define MT_ST_NO_BLKLIMS 0x200 -#define MT_ST_CAN_PARTITIONS 0x400 -#define MT_ST_SCSI2LOGICAL 0x800 -#define MT_ST_SYSV 0x1000 -#define MT_ST_NOWAIT 0x2000 -#define MT_ST_SILI 0x4000 -#define MT_ST_NOWAIT_EOF 0x8000 - -/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */ -#define MT_ST_CLEAR_DEFAULT 0xfffff -#define MT_ST_DEF_DENSITY (MT_ST_DEF_OPTIONS | 0x100000) -#define MT_ST_DEF_COMPRESSION (MT_ST_DEF_OPTIONS | 0x200000) -#define MT_ST_DEF_DRVBUFFER (MT_ST_DEF_OPTIONS | 0x300000) - -/* The offset for the arguments for the special HP changer load command. */ -#define MT_ST_HPLOADER_OFFSET 10000 - -#endif /* _LINUX_MTIO_H */ diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h index 54b8e0d8d916..5d0b2a1dee69 100644 --- a/include/linux/n_r3964.h +++ b/include/linux/n_r3964.h @@ -43,15 +43,12 @@ * * */ - #ifndef __LINUX_N_R3964_H__ #define __LINUX_N_R3964_H__ -/* line disciplines for r3964 protocol */ - -#ifdef __KERNEL__ #include +#include /* * Common ascii handshake characters: @@ -73,32 +70,6 @@ #define R3964_TO_RX_PANIC ((4000)*HZ/1000) #define R3964_MAX_RETRIES 5 -#endif - -/* - * Ioctl-commands - */ - -#define R3964_ENABLE_SIGNALS 0x5301 -#define R3964_SETPRIORITY 0x5302 -#define R3964_USE_BCC 0x5303 -#define R3964_READ_TELEGRAM 0x5304 - -/* Options for R3964_SETPRIORITY */ -#define R3964_MASTER 0 -#define R3964_SLAVE 1 - -/* Options for R3964_ENABLE_SIGNALS */ -#define R3964_SIG_ACK 0x0001 -#define R3964_SIG_DATA 0x0002 -#define R3964_SIG_ALL 0x000f -#define R3964_SIG_NONE 0x0000 -#define R3964_USE_SIGIO 0x1000 - -/* - * r3964 operation states: - */ -#ifdef __KERNEL__ enum { R3964_IDLE, R3964_TX_REQUEST, R3964_TRANSMITTING, @@ -127,29 +98,6 @@ struct r3964_client_info { }; -#endif - -/* types for msg_id: */ -enum {R3964_MSG_ACK=1, R3964_MSG_DATA }; - -#define R3964_MAX_MSG_COUNT 32 - -/* error codes for client messages */ -#define R3964_OK 0 /* no error. */ -#define R3964_TX_FAIL -1 /* transmission error, block NOT sent */ -#define R3964_OVERFLOW -2 /* msg queue overflow */ - -/* the client gets this struct when calling read(fd,...): */ -struct r3964_client_message { - int msg_id; - int arg; - int error_code; -}; - -#define R3964_MTU 256 - - -#ifdef __KERNEL__ struct r3964_block_header; @@ -226,6 +174,4 @@ struct r3964_info { int nRetry; }; -#endif - #endif diff --git a/include/linux/nbd.h b/include/linux/nbd.h index 5c86e2b33e2d..4871170a04a0 100644 --- a/include/linux/nbd.h +++ b/include/linux/nbd.h @@ -11,45 +11,13 @@ * 2004/02/19 Paul Clements * Removed PARANOIA, plus various cleanup and comments */ - #ifndef LINUX_NBD_H #define LINUX_NBD_H -#include - -#define NBD_SET_SOCK _IO( 0xab, 0 ) -#define NBD_SET_BLKSIZE _IO( 0xab, 1 ) -#define NBD_SET_SIZE _IO( 0xab, 2 ) -#define NBD_DO_IT _IO( 0xab, 3 ) -#define NBD_CLEAR_SOCK _IO( 0xab, 4 ) -#define NBD_CLEAR_QUE _IO( 0xab, 5 ) -#define NBD_PRINT_DEBUG _IO( 0xab, 6 ) -#define NBD_SET_SIZE_BLOCKS _IO( 0xab, 7 ) -#define NBD_DISCONNECT _IO( 0xab, 8 ) -#define NBD_SET_TIMEOUT _IO( 0xab, 9 ) -#define NBD_SET_FLAGS _IO( 0xab, 10) - -enum { - NBD_CMD_READ = 0, - NBD_CMD_WRITE = 1, - NBD_CMD_DISC = 2, - /* there is a gap here to match userspace */ - NBD_CMD_TRIM = 4 -}; - -/* values for flags field */ -#define NBD_FLAG_HAS_FLAGS (1 << 0) /* nbd-server supports flags */ -#define NBD_FLAG_READ_ONLY (1 << 1) /* device is read-only */ -/* there is a gap here to match userspace */ -#define NBD_FLAG_SEND_TRIM (1 << 5) /* send trim/discard */ - -#define nbd_cmd(req) ((req)->cmd[0]) - -/* userspace doesn't need the nbd_device structure */ -#ifdef __KERNEL__ #include #include +#include struct request; @@ -76,32 +44,3 @@ struct nbd_device { }; #endif - -/* These are sent over the network in the request/reply magic fields */ - -#define NBD_REQUEST_MAGIC 0x25609513 -#define NBD_REPLY_MAGIC 0x67446698 -/* Do *not* use magics: 0x12560953 0x96744668. */ - -/* - * This is the packet used for communication between client and - * server. All data are in network byte order. - */ -struct nbd_request { - __be32 magic; - __be32 type; /* == READ || == WRITE */ - char handle[8]; - __be64 from; - __be32 len; -} __attribute__((packed)); - -/* - * This is the reply packet that nbd-server sends back to the client after - * it has completed an I/O request (or an error occurs). - */ -struct nbd_reply { - __be32 magic; - __be32 error; /* 0 = ok, else error */ - char handle[8]; /* handle you got from request */ -}; -#endif diff --git a/include/linux/ncp.h b/include/linux/ncp.h deleted file mode 100644 index 99f0adeeb3f3..000000000000 --- a/include/linux/ncp.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * ncp.h - * - * Copyright (C) 1995 by Volker Lendecke - * Modified for sparc by J.F. Chadima - * Modified for __constant_ntoh by Frank A. Vorstenbosch - * - */ - -#ifndef _LINUX_NCP_H -#define _LINUX_NCP_H - -#include - -#define NCP_PTYPE (0x11) -#define NCP_PORT (0x0451) - -#define NCP_ALLOC_SLOT_REQUEST (0x1111) -#define NCP_REQUEST (0x2222) -#define NCP_DEALLOC_SLOT_REQUEST (0x5555) - -struct ncp_request_header { - __u16 type; - __u8 sequence; - __u8 conn_low; - __u8 task; - __u8 conn_high; - __u8 function; - __u8 data[0]; -} __attribute__((packed)); - -#define NCP_REPLY (0x3333) -#define NCP_WATCHDOG (0x3E3E) -#define NCP_POSITIVE_ACK (0x9999) - -struct ncp_reply_header { - __u16 type; - __u8 sequence; - __u8 conn_low; - __u8 task; - __u8 conn_high; - __u8 completion_code; - __u8 connection_state; - __u8 data[0]; -} __attribute__((packed)); - -#define NCP_VOLNAME_LEN (16) -#define NCP_NUMBER_OF_VOLUMES (256) -struct ncp_volume_info { - __u32 total_blocks; - __u32 free_blocks; - __u32 purgeable_blocks; - __u32 not_yet_purgeable_blocks; - __u32 total_dir_entries; - __u32 available_dir_entries; - __u8 sectors_per_block; - char volume_name[NCP_VOLNAME_LEN + 1]; -}; - -#define AR_READ (cpu_to_le16(1)) -#define AR_WRITE (cpu_to_le16(2)) -#define AR_EXCLUSIVE (cpu_to_le16(0x20)) - -#define NCP_FILE_ID_LEN 6 - -/* Defines for Name Spaces */ -#define NW_NS_DOS 0 -#define NW_NS_MAC 1 -#define NW_NS_NFS 2 -#define NW_NS_FTAM 3 -#define NW_NS_OS2 4 - -/* Defines for ReturnInformationMask */ -#define RIM_NAME (cpu_to_le32(1)) -#define RIM_SPACE_ALLOCATED (cpu_to_le32(2)) -#define RIM_ATTRIBUTES (cpu_to_le32(4)) -#define RIM_DATA_SIZE (cpu_to_le32(8)) -#define RIM_TOTAL_SIZE (cpu_to_le32(0x10)) -#define RIM_EXT_ATTR_INFO (cpu_to_le32(0x20)) -#define RIM_ARCHIVE (cpu_to_le32(0x40)) -#define RIM_MODIFY (cpu_to_le32(0x80)) -#define RIM_CREATION (cpu_to_le32(0x100)) -#define RIM_OWNING_NAMESPACE (cpu_to_le32(0x200)) -#define RIM_DIRECTORY (cpu_to_le32(0x400)) -#define RIM_RIGHTS (cpu_to_le32(0x800)) -#define RIM_ALL (cpu_to_le32(0xFFF)) -#define RIM_COMPRESSED_INFO (cpu_to_le32(0x80000000)) - -/* Defines for NSInfoBitMask */ -#define NSIBM_NFS_NAME 0x0001 -#define NSIBM_NFS_MODE 0x0002 -#define NSIBM_NFS_GID 0x0004 -#define NSIBM_NFS_NLINKS 0x0008 -#define NSIBM_NFS_RDEV 0x0010 -#define NSIBM_NFS_LINK 0x0020 -#define NSIBM_NFS_CREATED 0x0040 -#define NSIBM_NFS_UID 0x0080 -#define NSIBM_NFS_ACSFLAG 0x0100 -#define NSIBM_NFS_MYFLAG 0x0200 - -/* open/create modes */ -#define OC_MODE_OPEN 0x01 -#define OC_MODE_TRUNCATE 0x02 -#define OC_MODE_REPLACE 0x02 -#define OC_MODE_CREATE 0x08 - -/* open/create results */ -#define OC_ACTION_NONE 0x00 -#define OC_ACTION_OPEN 0x01 -#define OC_ACTION_CREATE 0x02 -#define OC_ACTION_TRUNCATE 0x04 -#define OC_ACTION_REPLACE 0x04 - -/* access rights attributes */ -#ifndef AR_READ_ONLY -#define AR_READ_ONLY 0x0001 -#define AR_WRITE_ONLY 0x0002 -#define AR_DENY_READ 0x0004 -#define AR_DENY_WRITE 0x0008 -#define AR_COMPATIBILITY 0x0010 -#define AR_WRITE_THROUGH 0x0040 -#define AR_OPEN_COMPRESSED 0x0100 -#endif - -struct nw_nfs_info { - __u32 mode; - __u32 rdev; -}; - -struct nw_info_struct { - __u32 spaceAlloc; - __le32 attributes; - __u16 flags; - __le32 dataStreamSize; - __le32 totalStreamSize; - __u16 numberOfStreams; - __le16 creationTime; - __le16 creationDate; - __u32 creatorID; - __le16 modifyTime; - __le16 modifyDate; - __u32 modifierID; - __le16 lastAccessDate; - __u16 archiveTime; - __u16 archiveDate; - __u32 archiverID; - __u16 inheritedRightsMask; - __le32 dirEntNum; - __le32 DosDirNum; - __u32 volNumber; - __u32 EADataSize; - __u32 EAKeyCount; - __u32 EAKeySize; - __u32 NSCreator; - __u8 nameLen; - __u8 entryName[256]; - /* libncp may depend on there being nothing after entryName */ -#ifdef __KERNEL__ - struct nw_nfs_info nfs; -#endif -} __attribute__((packed)); - -/* modify mask - use with MODIFY_DOS_INFO structure */ -#define DM_ATTRIBUTES (cpu_to_le32(0x02)) -#define DM_CREATE_DATE (cpu_to_le32(0x04)) -#define DM_CREATE_TIME (cpu_to_le32(0x08)) -#define DM_CREATOR_ID (cpu_to_le32(0x10)) -#define DM_ARCHIVE_DATE (cpu_to_le32(0x20)) -#define DM_ARCHIVE_TIME (cpu_to_le32(0x40)) -#define DM_ARCHIVER_ID (cpu_to_le32(0x80)) -#define DM_MODIFY_DATE (cpu_to_le32(0x0100)) -#define DM_MODIFY_TIME (cpu_to_le32(0x0200)) -#define DM_MODIFIER_ID (cpu_to_le32(0x0400)) -#define DM_LAST_ACCESS_DATE (cpu_to_le32(0x0800)) -#define DM_INHERITED_RIGHTS_MASK (cpu_to_le32(0x1000)) -#define DM_MAXIMUM_SPACE (cpu_to_le32(0x2000)) - -struct nw_modify_dos_info { - __le32 attributes; - __le16 creationDate; - __le16 creationTime; - __u32 creatorID; - __le16 modifyDate; - __le16 modifyTime; - __u32 modifierID; - __u16 archiveDate; - __u16 archiveTime; - __u32 archiverID; - __le16 lastAccessDate; - __u16 inheritanceGrantMask; - __u16 inheritanceRevokeMask; - __u32 maximumSpace; -} __attribute__((packed)); - -struct nw_search_sequence { - __u8 volNumber; - __u32 dirBase; - __u32 sequence; -} __attribute__((packed)); - -#endif /* _LINUX_NCP_H */ diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h deleted file mode 100644 index e13eefef0653..000000000000 --- a/include/linux/ncp_fs.h +++ /dev/null @@ -1,146 +0,0 @@ -/* - * ncp_fs.h - * - * Copyright (C) 1995, 1996 by Volker Lendecke - * - */ - -#ifndef _LINUX_NCP_FS_H -#define _LINUX_NCP_FS_H - -#include -#include -#include -#include - -#include -#include - -/* - * ioctl commands - */ - -struct ncp_ioctl_request { - unsigned int function; - unsigned int size; - char __user *data; -}; - -struct ncp_fs_info { - int version; - struct sockaddr_ipx addr; - __kernel_uid_t mounted_uid; - int connection; /* Connection number the server assigned us */ - int buffer_size; /* The negotiated buffer size, to be - used for read/write requests! */ - - int volume_number; - __le32 directory_id; -}; - -struct ncp_fs_info_v2 { - int version; - unsigned long mounted_uid; - unsigned int connection; - unsigned int buffer_size; - - unsigned int volume_number; - __le32 directory_id; - - __u32 dummy1; - __u32 dummy2; - __u32 dummy3; -}; - -struct ncp_sign_init -{ - char sign_root[8]; - char sign_last[16]; -}; - -struct ncp_lock_ioctl -{ -#define NCP_LOCK_LOG 0 -#define NCP_LOCK_SH 1 -#define NCP_LOCK_EX 2 -#define NCP_LOCK_CLEAR 256 - int cmd; - int origin; - unsigned int offset; - unsigned int length; -#define NCP_LOCK_DEFAULT_TIMEOUT 18 -#define NCP_LOCK_MAX_TIMEOUT 180 - int timeout; -}; - -struct ncp_setroot_ioctl -{ - int volNumber; - int namespace; - __le32 dirEntNum; -}; - -struct ncp_objectname_ioctl -{ -#define NCP_AUTH_NONE 0x00 -#define NCP_AUTH_BIND 0x31 -#define NCP_AUTH_NDS 0x32 - int auth_type; - size_t object_name_len; - void __user * object_name; /* a userspace data, in most cases user name */ -}; - -struct ncp_privatedata_ioctl -{ - size_t len; - void __user * data; /* ~1000 for NDS */ -}; - -/* NLS charsets by ioctl */ -#define NCP_IOCSNAME_LEN 20 -struct ncp_nls_ioctl -{ - unsigned char codepage[NCP_IOCSNAME_LEN+1]; - unsigned char iocharset[NCP_IOCSNAME_LEN+1]; -}; - -#define NCP_IOC_NCPREQUEST _IOR('n', 1, struct ncp_ioctl_request) -#define NCP_IOC_GETMOUNTUID _IOW('n', 2, __kernel_old_uid_t) -#define NCP_IOC_GETMOUNTUID2 _IOW('n', 2, unsigned long) - -#define NCP_IOC_CONN_LOGGED_IN _IO('n', 3) - -#define NCP_GET_FS_INFO_VERSION (1) -#define NCP_IOC_GET_FS_INFO _IOWR('n', 4, struct ncp_fs_info) -#define NCP_GET_FS_INFO_VERSION_V2 (2) -#define NCP_IOC_GET_FS_INFO_V2 _IOWR('n', 4, struct ncp_fs_info_v2) - -#define NCP_IOC_SIGN_INIT _IOR('n', 5, struct ncp_sign_init) -#define NCP_IOC_SIGN_WANTED _IOR('n', 6, int) -#define NCP_IOC_SET_SIGN_WANTED _IOW('n', 6, int) - -#define NCP_IOC_LOCKUNLOCK _IOR('n', 7, struct ncp_lock_ioctl) - -#define NCP_IOC_GETROOT _IOW('n', 8, struct ncp_setroot_ioctl) -#define NCP_IOC_SETROOT _IOR('n', 8, struct ncp_setroot_ioctl) - -#define NCP_IOC_GETOBJECTNAME _IOWR('n', 9, struct ncp_objectname_ioctl) -#define NCP_IOC_SETOBJECTNAME _IOR('n', 9, struct ncp_objectname_ioctl) -#define NCP_IOC_GETPRIVATEDATA _IOWR('n', 10, struct ncp_privatedata_ioctl) -#define NCP_IOC_SETPRIVATEDATA _IOR('n', 10, struct ncp_privatedata_ioctl) - -#define NCP_IOC_GETCHARSETS _IOWR('n', 11, struct ncp_nls_ioctl) -#define NCP_IOC_SETCHARSETS _IOR('n', 11, struct ncp_nls_ioctl) - -#define NCP_IOC_GETDENTRYTTL _IOW('n', 12, __u32) -#define NCP_IOC_SETDENTRYTTL _IOR('n', 12, __u32) - -/* - * The packet size to allocate. One page should be enough. - */ -#define NCP_PACKET_SIZE 4070 - -#define NCP_MAXPATHLEN 255 -#define NCP_MAXNAMELEN 14 - -#endif /* _LINUX_NCP_FS_H */ diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h deleted file mode 100644 index dfcbea2d889f..000000000000 --- a/include/linux/ncp_mount.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * ncp_mount.h - * - * Copyright (C) 1995, 1996 by Volker Lendecke - * - */ - -#ifndef _LINUX_NCP_MOUNT_H -#define _LINUX_NCP_MOUNT_H - -#include -#include - -#define NCP_MOUNT_VERSION 3 /* Binary */ - -/* Values for flags */ -#define NCP_MOUNT_SOFT 0x0001 -#define NCP_MOUNT_INTR 0x0002 -#define NCP_MOUNT_STRONG 0x0004 /* enable delete/rename of r/o files */ -#define NCP_MOUNT_NO_OS2 0x0008 /* do not use OS/2 (LONG) namespace */ -#define NCP_MOUNT_NO_NFS 0x0010 /* do not use NFS namespace */ -#define NCP_MOUNT_EXTRAS 0x0020 -#define NCP_MOUNT_SYMLINKS 0x0040 /* enable symlinks */ -#define NCP_MOUNT_NFS_EXTRAS 0x0080 /* Enable use of NFS NS meta-info */ - -struct ncp_mount_data { - int version; - unsigned int ncp_fd; /* The socket to the ncp port */ - __kernel_uid_t mounted_uid; /* Who may umount() this filesystem? */ - __kernel_pid_t wdog_pid; /* Who cares for our watchdog packets? */ - - unsigned char mounted_vol[NCP_VOLNAME_LEN + 1]; - unsigned int time_out; /* How long should I wait after - sending a NCP request? */ - unsigned int retry_count; /* And how often should I retry? */ - unsigned int flags; - - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_mode_t file_mode; - __kernel_mode_t dir_mode; -}; - -#define NCP_MOUNT_VERSION_V4 (4) /* Binary or text */ - -struct ncp_mount_data_v4 { - int version; - unsigned long flags; /* NCP_MOUNT_* flags */ - /* MIPS uses long __kernel_uid_t, but... */ - /* we neever pass -1, so it is safe */ - unsigned long mounted_uid; /* Who may umount() this filesystem? */ - /* MIPS uses long __kernel_pid_t */ - long wdog_pid; /* Who cares for our watchdog packets? */ - - unsigned int ncp_fd; /* The socket to the ncp port */ - unsigned int time_out; /* How long should I wait after - sending a NCP request? */ - unsigned int retry_count; /* And how often should I retry? */ - - /* MIPS uses long __kernel_uid_t... */ - /* we never pass -1, so it is safe */ - unsigned long uid; - unsigned long gid; - /* MIPS uses unsigned long __kernel_mode_t */ - unsigned long file_mode; - unsigned long dir_mode; -}; - -#define NCP_MOUNT_VERSION_V5 (5) /* Text only */ - -#endif diff --git a/include/linux/ncp_no.h b/include/linux/ncp_no.h deleted file mode 100644 index cddaa48fb182..000000000000 --- a/include/linux/ncp_no.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _NCP_NO -#define _NCP_NO - -/* these define the attribute byte as seen by NCP */ -#define aRONLY (__cpu_to_le32(1)) -#define aHIDDEN (__cpu_to_le32(2)) -#define aSYSTEM (__cpu_to_le32(4)) -#define aEXECUTE (__cpu_to_le32(8)) -#define aDIR (__cpu_to_le32(0x10)) -#define aARCH (__cpu_to_le32(0x20)) -#define aSHARED (__cpu_to_le32(0x80)) -#define aDONTSUBALLOCATE (__cpu_to_le32(1L<<11)) -#define aTRANSACTIONAL (__cpu_to_le32(1L<<12)) -#define aPURGE (__cpu_to_le32(1L<<16)) -#define aRENAMEINHIBIT (__cpu_to_le32(1L<<17)) -#define aDELETEINHIBIT (__cpu_to_le32(1L<<18)) -#define aDONTCOMPRESS (__cpu_to_le32(1L<<27)) - -#endif /* _NCP_NO */ diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h deleted file mode 100644 index 275e5d65dcb2..000000000000 --- a/include/linux/neighbour.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef __LINUX_NEIGHBOUR_H -#define __LINUX_NEIGHBOUR_H - -#include -#include - -struct ndmsg { - __u8 ndm_family; - __u8 ndm_pad1; - __u16 ndm_pad2; - __s32 ndm_ifindex; - __u16 ndm_state; - __u8 ndm_flags; - __u8 ndm_type; -}; - -enum { - NDA_UNSPEC, - NDA_DST, - NDA_LLADDR, - NDA_CACHEINFO, - NDA_PROBES, - __NDA_MAX -}; - -#define NDA_MAX (__NDA_MAX - 1) - -/* - * Neighbor Cache Entry Flags - */ - -#define NTF_USE 0x01 -#define NTF_PROXY 0x08 /* == ATF_PUBL */ -#define NTF_ROUTER 0x80 - -#define NTF_SELF 0x02 -#define NTF_MASTER 0x04 - -/* - * Neighbor Cache Entry States. - */ - -#define NUD_INCOMPLETE 0x01 -#define NUD_REACHABLE 0x02 -#define NUD_STALE 0x04 -#define NUD_DELAY 0x08 -#define NUD_PROBE 0x10 -#define NUD_FAILED 0x20 - -/* Dummy states */ -#define NUD_NOARP 0x40 -#define NUD_PERMANENT 0x80 -#define NUD_NONE 0x00 - -/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change - and make no address resolution or NUD. - NUD_PERMANENT is also cannot be deleted by garbage collectors. - */ - -struct nda_cacheinfo { - __u32 ndm_confirmed; - __u32 ndm_used; - __u32 ndm_updated; - __u32 ndm_refcnt; -}; - -/***************************************************************** - * Neighbour tables specific messages. - * - * To retrieve the neighbour tables send RTM_GETNEIGHTBL with the - * NLM_F_DUMP flag set. Every neighbour table configuration is - * spread over multiple messages to avoid running into message - * size limits on systems with many interfaces. The first message - * in the sequence transports all not device specific data such as - * statistics, configuration, and the default parameter set. - * This message is followed by 0..n messages carrying device - * specific parameter sets. - * Although the ordering should be sufficient, NDTA_NAME can be - * used to identify sequences. The initial message can be identified - * by checking for NDTA_CONFIG. The device specific messages do - * not contain this TLV but have NDTPA_IFINDEX set to the - * corresponding interface index. - * - * To change neighbour table attributes, send RTM_SETNEIGHTBL - * with NDTA_NAME set. Changeable attribute include NDTA_THRESH[1-3], - * NDTA_GC_INTERVAL, and all TLVs in NDTA_PARMS unless marked - * otherwise. Device specific parameter sets can be changed by - * setting NDTPA_IFINDEX to the interface index of the corresponding - * device. - ****/ - -struct ndt_stats { - __u64 ndts_allocs; - __u64 ndts_destroys; - __u64 ndts_hash_grows; - __u64 ndts_res_failed; - __u64 ndts_lookups; - __u64 ndts_hits; - __u64 ndts_rcv_probes_mcast; - __u64 ndts_rcv_probes_ucast; - __u64 ndts_periodic_gc_runs; - __u64 ndts_forced_gc_runs; -}; - -enum { - NDTPA_UNSPEC, - NDTPA_IFINDEX, /* u32, unchangeable */ - NDTPA_REFCNT, /* u32, read-only */ - NDTPA_REACHABLE_TIME, /* u64, read-only, msecs */ - NDTPA_BASE_REACHABLE_TIME, /* u64, msecs */ - NDTPA_RETRANS_TIME, /* u64, msecs */ - NDTPA_GC_STALETIME, /* u64, msecs */ - NDTPA_DELAY_PROBE_TIME, /* u64, msecs */ - NDTPA_QUEUE_LEN, /* u32 */ - NDTPA_APP_PROBES, /* u32 */ - NDTPA_UCAST_PROBES, /* u32 */ - NDTPA_MCAST_PROBES, /* u32 */ - NDTPA_ANYCAST_DELAY, /* u64, msecs */ - NDTPA_PROXY_DELAY, /* u64, msecs */ - NDTPA_PROXY_QLEN, /* u32 */ - NDTPA_LOCKTIME, /* u64, msecs */ - NDTPA_QUEUE_LENBYTES, /* u32 */ - __NDTPA_MAX -}; -#define NDTPA_MAX (__NDTPA_MAX - 1) - -struct ndtmsg { - __u8 ndtm_family; - __u8 ndtm_pad1; - __u16 ndtm_pad2; -}; - -struct ndt_config { - __u16 ndtc_key_len; - __u16 ndtc_entry_size; - __u32 ndtc_entries; - __u32 ndtc_last_flush; /* delta to now in msecs */ - __u32 ndtc_last_rand; /* delta to now in msecs */ - __u32 ndtc_hash_rnd; - __u32 ndtc_hash_mask; - __u32 ndtc_hash_chain_gc; - __u32 ndtc_proxy_qlen; -}; - -enum { - NDTA_UNSPEC, - NDTA_NAME, /* char *, unchangeable */ - NDTA_THRESH1, /* u32 */ - NDTA_THRESH2, /* u32 */ - NDTA_THRESH3, /* u32 */ - NDTA_CONFIG, /* struct ndt_config, read-only */ - NDTA_PARMS, /* nested TLV NDTPA_* */ - NDTA_STATS, /* struct ndt_stats, read-only */ - NDTA_GC_INTERVAL, /* u64, msecs */ - __NDTA_MAX -}; -#define NDTA_MAX (__NDTA_MAX - 1) - -#endif diff --git a/include/linux/net.h b/include/linux/net.h index 6ab31cabef7c..aa1673160a45 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -18,49 +18,13 @@ #ifndef _LINUX_NET_H #define _LINUX_NET_H -#include -#include - -#define NPROTO AF_MAX - -#define SYS_SOCKET 1 /* sys_socket(2) */ -#define SYS_BIND 2 /* sys_bind(2) */ -#define SYS_CONNECT 3 /* sys_connect(2) */ -#define SYS_LISTEN 4 /* sys_listen(2) */ -#define SYS_ACCEPT 5 /* sys_accept(2) */ -#define SYS_GETSOCKNAME 6 /* sys_getsockname(2) */ -#define SYS_GETPEERNAME 7 /* sys_getpeername(2) */ -#define SYS_SOCKETPAIR 8 /* sys_socketpair(2) */ -#define SYS_SEND 9 /* sys_send(2) */ -#define SYS_RECV 10 /* sys_recv(2) */ -#define SYS_SENDTO 11 /* sys_sendto(2) */ -#define SYS_RECVFROM 12 /* sys_recvfrom(2) */ -#define SYS_SHUTDOWN 13 /* sys_shutdown(2) */ -#define SYS_SETSOCKOPT 14 /* sys_setsockopt(2) */ -#define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ -#define SYS_SENDMSG 16 /* sys_sendmsg(2) */ -#define SYS_RECVMSG 17 /* sys_recvmsg(2) */ -#define SYS_ACCEPT4 18 /* sys_accept4(2) */ -#define SYS_RECVMMSG 19 /* sys_recvmmsg(2) */ -#define SYS_SENDMMSG 20 /* sys_sendmmsg(2) */ - -typedef enum { - SS_FREE = 0, /* not allocated */ - SS_UNCONNECTED, /* unconnected to any socket */ - SS_CONNECTING, /* in process of connecting */ - SS_CONNECTED, /* connected to socket */ - SS_DISCONNECTING /* in process of disconnecting */ -} socket_state; - -#define __SO_ACCEPTCON (1 << 16) /* performed a listen */ - -#ifdef __KERNEL__ #include #include #include #include /* For O_CLOEXEC and O_NONBLOCK */ #include #include +#include struct poll_table_struct; struct pipe_inode_info; @@ -319,5 +283,4 @@ extern int kernel_sock_shutdown(struct socket *sock, #define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \ MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \ name) -#endif /* __KERNEL__ */ #endif /* _LINUX_NET_H */ diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h deleted file mode 100644 index 2a739462caeb..000000000000 --- a/include/linux/net_dropmon.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __NET_DROPMON_H -#define __NET_DROPMON_H - -#include -#include - -struct net_dm_drop_point { - __u8 pc[8]; - __u32 count; -}; - -#define is_drop_point_hw(x) do {\ - int ____i, ____j;\ - for (____i = 0; ____i < 8; i ____i++)\ - ____j |= x[____i];\ - ____j;\ -} while (0) - -#define NET_DM_CFG_VERSION 0 -#define NET_DM_CFG_ALERT_COUNT 1 -#define NET_DM_CFG_ALERT_DELAY 2 -#define NET_DM_CFG_MAX 3 - -struct net_dm_config_entry { - __u32 type; - __u64 data __attribute__((aligned(8))); -}; - -struct net_dm_config_msg { - __u32 entries; - struct net_dm_config_entry options[0]; -}; - -struct net_dm_alert_msg { - __u32 entries; - struct net_dm_drop_point points[0]; -}; - -struct net_dm_user_msg { - union { - struct net_dm_config_msg user; - struct net_dm_alert_msg alert; - } u; -}; - - -/* These are the netlink message types for this protocol */ - -enum { - NET_DM_CMD_UNSPEC = 0, - NET_DM_CMD_ALERT, - NET_DM_CMD_CONFIG, - NET_DM_CMD_START, - NET_DM_CMD_STOP, - _NET_DM_CMD_MAX, -}; - -#define NET_DM_CMD_MAX (_NET_DM_CMD_MAX - 1) - -/* - * Our group identifiers - */ -#define NET_DM_GRP_ALERT 1 -#endif diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h deleted file mode 100644 index ae5df122e42f..000000000000 --- a/include/linux/net_tstamp.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Userspace API for hardware time stamping of network packets - * - * Copyright (C) 2008,2009 Intel Corporation - * Author: Patrick Ohly - * - */ - -#ifndef _NET_TIMESTAMPING_H -#define _NET_TIMESTAMPING_H - -#include /* for SO_TIMESTAMPING */ - -/* SO_TIMESTAMPING gets an integer bit field comprised of these values */ -enum { - SOF_TIMESTAMPING_TX_HARDWARE = (1<<0), - SOF_TIMESTAMPING_TX_SOFTWARE = (1<<1), - SOF_TIMESTAMPING_RX_HARDWARE = (1<<2), - SOF_TIMESTAMPING_RX_SOFTWARE = (1<<3), - SOF_TIMESTAMPING_SOFTWARE = (1<<4), - SOF_TIMESTAMPING_SYS_HARDWARE = (1<<5), - SOF_TIMESTAMPING_RAW_HARDWARE = (1<<6), - SOF_TIMESTAMPING_MASK = - (SOF_TIMESTAMPING_RAW_HARDWARE - 1) | - SOF_TIMESTAMPING_RAW_HARDWARE -}; - -/** - * struct hwtstamp_config - %SIOCSHWTSTAMP parameter - * - * @flags: no flags defined right now, must be zero - * @tx_type: one of HWTSTAMP_TX_* - * @rx_type: one of one of HWTSTAMP_FILTER_* - * - * %SIOCSHWTSTAMP expects a &struct ifreq with a ifr_data pointer to - * this structure. dev_ifsioc() in the kernel takes care of the - * translation between 32 bit userspace and 64 bit kernel. The - * structure is intentionally chosen so that it has the same layout on - * 32 and 64 bit systems, don't break this! - */ -struct hwtstamp_config { - int flags; - int tx_type; - int rx_filter; -}; - -/* possible values for hwtstamp_config->tx_type */ -enum hwtstamp_tx_types { - /* - * No outgoing packet will need hardware time stamping; - * should a packet arrive which asks for it, no hardware - * time stamping will be done. - */ - HWTSTAMP_TX_OFF, - - /* - * Enables hardware time stamping for outgoing packets; - * the sender of the packet decides which are to be - * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE - * before sending the packet. - */ - HWTSTAMP_TX_ON, - - /* - * Enables time stamping for outgoing packets just as - * HWTSTAMP_TX_ON does, but also enables time stamp insertion - * directly into Sync packets. In this case, transmitted Sync - * packets will not received a time stamp via the socket error - * queue. - */ - HWTSTAMP_TX_ONESTEP_SYNC, -}; - -/* possible values for hwtstamp_config->rx_filter */ -enum hwtstamp_rx_filters { - /* time stamp no incoming packet at all */ - HWTSTAMP_FILTER_NONE, - - /* time stamp any incoming packet */ - HWTSTAMP_FILTER_ALL, - - /* return value: time stamp all packets requested plus some others */ - HWTSTAMP_FILTER_SOME, - - /* PTP v1, UDP, any kind of event packet */ - HWTSTAMP_FILTER_PTP_V1_L4_EVENT, - /* PTP v1, UDP, Sync packet */ - HWTSTAMP_FILTER_PTP_V1_L4_SYNC, - /* PTP v1, UDP, Delay_req packet */ - HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ, - /* PTP v2, UDP, any kind of event packet */ - HWTSTAMP_FILTER_PTP_V2_L4_EVENT, - /* PTP v2, UDP, Sync packet */ - HWTSTAMP_FILTER_PTP_V2_L4_SYNC, - /* PTP v2, UDP, Delay_req packet */ - HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ, - - /* 802.AS1, Ethernet, any kind of event packet */ - HWTSTAMP_FILTER_PTP_V2_L2_EVENT, - /* 802.AS1, Ethernet, Sync packet */ - HWTSTAMP_FILTER_PTP_V2_L2_SYNC, - /* 802.AS1, Ethernet, Delay_req packet */ - HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ, - - /* PTP v2/802.AS1, any layer, any kind of event packet */ - HWTSTAMP_FILTER_PTP_V2_EVENT, - /* PTP v2/802.AS1, any layer, Sync packet */ - HWTSTAMP_FILTER_PTP_V2_SYNC, - /* PTP v2/802.AS1, any layer, Delay_req packet */ - HWTSTAMP_FILTER_PTP_V2_DELAY_REQ, -}; - -#endif /* _NET_TIMESTAMPING_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 561c8bc8976d..f8eda0276f03 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -25,12 +25,6 @@ #ifndef _LINUX_NETDEVICE_H #define _LINUX_NETDEVICE_H -#include -#include -#include -#include - -#ifdef __KERNEL__ #include #include #include @@ -55,6 +49,7 @@ #include #include +#include struct netpoll_info; struct device; @@ -133,14 +128,6 @@ static inline bool dev_xmit_complete(int rc) return false; } -#endif - -#define MAX_ADDR_LEN 32 /* Largest hardware address length */ - -/* Initial net device group. All devices belong to group 0 by default. */ -#define INIT_NETDEV_GROUP 0 - -#ifdef __KERNEL__ /* * Compute the worst case header length according to the protocols * used. @@ -196,21 +183,6 @@ struct net_device_stats { unsigned long tx_compressed; }; -#endif /* __KERNEL__ */ - - -/* Media selection options. */ -enum { - IF_PORT_UNKNOWN = 0, - IF_PORT_10BASE2, - IF_PORT_10BASET, - IF_PORT_AUI, - IF_PORT_100BASET, - IF_PORT_100BASETX, - IF_PORT_100BASEFX -}; - -#ifdef __KERNEL__ #include #include @@ -2844,6 +2816,4 @@ do { \ }) #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_NETDEVICE_H */ diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 1dcf2a38e51f..ee142846f56a 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -1,7 +1,6 @@ #ifndef __LINUX_NETFILTER_H #define __LINUX_NETFILTER_H -#ifdef __KERNEL__ #include #include #include @@ -10,75 +9,7 @@ #include #include #include -#endif -#include -#include -#include - -/* Responses from hook functions. */ -#define NF_DROP 0 -#define NF_ACCEPT 1 -#define NF_STOLEN 2 -#define NF_QUEUE 3 -#define NF_REPEAT 4 -#define NF_STOP 5 -#define NF_MAX_VERDICT NF_STOP - -/* we overload the higher bits for encoding auxiliary data such as the queue - * number or errno values. Not nice, but better than additional function - * arguments. */ -#define NF_VERDICT_MASK 0x000000ff - -/* extra verdict flags have mask 0x0000ff00 */ -#define NF_VERDICT_FLAG_QUEUE_BYPASS 0x00008000 - -/* queue number (NF_QUEUE) or errno (NF_DROP) */ -#define NF_VERDICT_QMASK 0xffff0000 -#define NF_VERDICT_QBITS 16 - -#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE) - -#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP) - -/* only for userspace compatibility */ -#ifndef __KERNEL__ -/* Generic cache responses from hook functions. - <= 0x2000 is used for protocol-flags. */ -#define NFC_UNKNOWN 0x4000 -#define NFC_ALTERED 0x8000 - -/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */ -#define NF_VERDICT_BITS 16 -#endif - -enum nf_inet_hooks { - NF_INET_PRE_ROUTING, - NF_INET_LOCAL_IN, - NF_INET_FORWARD, - NF_INET_LOCAL_OUT, - NF_INET_POST_ROUTING, - NF_INET_NUMHOOKS -}; - -enum { - NFPROTO_UNSPEC = 0, - NFPROTO_IPV4 = 2, - NFPROTO_ARP = 3, - NFPROTO_BRIDGE = 7, - NFPROTO_IPV6 = 10, - NFPROTO_DECNET = 12, - NFPROTO_NUMPROTO, -}; - -union nf_inet_addr { - __u32 all[4]; - __be32 ip; - __be32 ip6[4]; - struct in_addr in; - struct in6_addr in6; -}; - -#ifdef __KERNEL__ +#include #ifdef CONFIG_NETFILTER static inline int NF_DROP_GETERR(int verdict) { @@ -411,5 +342,4 @@ extern struct nfq_ct_nat_hook __rcu *nfq_ct_nat_hook; static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {} #endif -#endif /*__KERNEL__*/ #endif /*__LINUX_NETFILTER_H*/ diff --git a/include/linux/netfilter_arp.h b/include/linux/netfilter_arp.h deleted file mode 100644 index 92bc6ddcbf73..000000000000 --- a/include/linux/netfilter_arp.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __LINUX_ARP_NETFILTER_H -#define __LINUX_ARP_NETFILTER_H - -/* ARP-specific defines for netfilter. - * (C)2002 Rusty Russell IBM -- This code is GPL. - */ - -#include - -/* There is no PF_ARP. */ -#define NF_ARP 0 - -/* ARP Hooks */ -#define NF_ARP_IN 0 -#define NF_ARP_OUT 1 -#define NF_ARP_FORWARD 2 -#define NF_ARP_NUMHOOKS 3 - -#endif /* __LINUX_ARP_NETFILTER_H */ diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 31d2844e6572..dfb4d9e52bcb 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -1,30 +1,8 @@ #ifndef __LINUX_BRIDGE_NETFILTER_H #define __LINUX_BRIDGE_NETFILTER_H -/* bridge-specific defines for netfilter. - */ - -#include -#include -#include -#include - -/* Bridge Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_BR_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_BR_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_BR_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_BR_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_BR_POST_ROUTING 4 -/* Not really a hook, but used for the ebtables broute table */ -#define NF_BR_BROUTING 5 -#define NF_BR_NUMHOOKS 6 - -#ifdef __KERNEL__ +#include + enum nf_br_hook_priorities { NF_BR_PRI_FIRST = INT_MIN, @@ -118,5 +96,4 @@ static inline void br_drop_fake_rtable(struct sk_buff *skb) #define br_drop_fake_rtable(skb) do { } while (0) #endif /* CONFIG_BRIDGE_NETFILTER */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h deleted file mode 100644 index 0b09732aacd5..000000000000 --- a/include/linux/netfilter_decnet.h +++ /dev/null @@ -1,79 +0,0 @@ -#ifndef __LINUX_DECNET_NETFILTER_H -#define __LINUX_DECNET_NETFILTER_H - -/* DECnet-specific defines for netfilter. - * This file (C) Steve Whitehouse 1999 derived from the - * ipv4 netfilter header file which is - * (C)1998 Rusty Russell -- This code is GPL. - */ - -#include - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include /* for INT_MIN, INT_MAX */ - -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_DN_SRC 0x0001 -/* Dest IP address. */ -#define NFC_DN_DST 0x0002 -/* Input device. */ -#define NFC_DN_IF_IN 0x0004 -/* Output device. */ -#define NFC_DN_IF_OUT 0x0008 -#endif /* ! __KERNEL__ */ - -/* DECnet Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_DN_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_DN_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_DN_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_DN_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_DN_POST_ROUTING 4 -/* Input Hello Packets */ -#define NF_DN_HELLO 5 -/* Input Routing Packets */ -#define NF_DN_ROUTE 6 -#define NF_DN_NUMHOOKS 7 - -enum nf_dn_hook_priorities { - NF_DN_PRI_FIRST = INT_MIN, - NF_DN_PRI_CONNTRACK = -200, - NF_DN_PRI_MANGLE = -150, - NF_DN_PRI_NAT_DST = -100, - NF_DN_PRI_FILTER = 0, - NF_DN_PRI_NAT_SRC = 100, - NF_DN_PRI_DNRTMSG = 200, - NF_DN_PRI_LAST = INT_MAX, -}; - -struct nf_dn_rtmsg { - int nfdn_ifindex; -}; - -#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg))) - -#ifndef __KERNEL__ -/* backwards compatibility for userspace */ -#define DNRMG_L1_GROUP 0x01 -#define DNRMG_L2_GROUP 0x02 -#endif - -enum { - DNRNG_NLGRP_NONE, -#define DNRNG_NLGRP_NONE DNRNG_NLGRP_NONE - DNRNG_NLGRP_L1, -#define DNRNG_NLGRP_L1 DNRNG_NLGRP_L1 - DNRNG_NLGRP_L2, -#define DNRNG_NLGRP_L2 DNRNG_NLGRP_L2 - __DNRNG_NLGRP_MAX -}; -#define DNRNG_NLGRP_MAX (__DNRNG_NLGRP_MAX - 1) - -#endif /*__LINUX_DECNET_NETFILTER_H*/ diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index b962dfc695ae..dfaf116b3e81 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -1,86 +1,12 @@ -#ifndef __LINUX_IP_NETFILTER_H -#define __LINUX_IP_NETFILTER_H - /* IPv4-specific defines for netfilter. * (C)1998 Rusty Russell -- This code is GPL. */ +#ifndef __LINUX_IP_NETFILTER_H +#define __LINUX_IP_NETFILTER_H -#include - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include /* for INT_MIN, INT_MAX */ - -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP_DST 0x0002 -/* Input device. */ -#define NFC_IP_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP_TOS 0x0010 -/* Protocol. */ -#define NFC_IP_PROTO 0x0020 -/* IP options. */ -#define NFC_IP_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP_FRAG 0x0080 - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP_PROTO_UNKNOWN 0x2000 - -/* IP Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_IP_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_IP_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_IP_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_IP_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_IP_POST_ROUTING 4 -#define NF_IP_NUMHOOKS 5 -#endif /* ! __KERNEL__ */ - -enum nf_ip_hook_priorities { - NF_IP_PRI_FIRST = INT_MIN, - NF_IP_PRI_CONNTRACK_DEFRAG = -400, - NF_IP_PRI_RAW = -300, - NF_IP_PRI_SELINUX_FIRST = -225, - NF_IP_PRI_CONNTRACK = -200, - NF_IP_PRI_MANGLE = -150, - NF_IP_PRI_NAT_DST = -100, - NF_IP_PRI_FILTER = 0, - NF_IP_PRI_SECURITY = 50, - NF_IP_PRI_NAT_SRC = 100, - NF_IP_PRI_SELINUX_LAST = 225, - NF_IP_PRI_CONNTRACK_HELPER = 300, - NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, - NF_IP_PRI_LAST = INT_MAX, -}; - -/* Arguments for setsockopt SOL_IP: */ -/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */ -/* 2.2 firewalling (+ masq) went from 64 through 76 */ -/* 2.4 firewalling went 64 through 67. */ -#define SO_ORIGINAL_DST 80 +#include -#ifdef __KERNEL__ extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type); extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook, unsigned int dataoff, u_int8_t protocol); -#endif /*__KERNEL__*/ - #endif /*__LINUX_IP_NETFILTER_H*/ diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 7c8a513ce7a3..98ffb54988b6 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -1,81 +1,14 @@ -#ifndef __LINUX_IP6_NETFILTER_H -#define __LINUX_IP6_NETFILTER_H - /* IPv6-specific defines for netfilter. * (C)1998 Rusty Russell -- This code is GPL. * (C)1999 David Jeffery * this header was blatantly ripped from netfilter_ipv4.h * it's amazing what adding a bunch of 6s can do =8^) */ +#ifndef __LINUX_IP6_NETFILTER_H +#define __LINUX_IP6_NETFILTER_H -#include - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include /* for INT_MIN, INT_MAX */ - -/* IP Cache bits. */ -/* Src IP address. */ -#define NFC_IP6_SRC 0x0001 -/* Dest IP address. */ -#define NFC_IP6_DST 0x0002 -/* Input device. */ -#define NFC_IP6_IF_IN 0x0004 -/* Output device. */ -#define NFC_IP6_IF_OUT 0x0008 -/* TOS. */ -#define NFC_IP6_TOS 0x0010 -/* Protocol. */ -#define NFC_IP6_PROTO 0x0020 -/* IP options. */ -#define NFC_IP6_OPTIONS 0x0040 -/* Frag & flags. */ -#define NFC_IP6_FRAG 0x0080 - - -/* Per-protocol information: only matters if proto match. */ -/* TCP flags. */ -#define NFC_IP6_TCPFLAGS 0x0100 -/* Source port. */ -#define NFC_IP6_SRC_PT 0x0200 -/* Dest port. */ -#define NFC_IP6_DST_PT 0x0400 -/* Something else about the proto */ -#define NFC_IP6_PROTO_UNKNOWN 0x2000 - -/* IP6 Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_IP6_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_IP6_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_IP6_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_IP6_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_IP6_POST_ROUTING 4 -#define NF_IP6_NUMHOOKS 5 -#endif /* ! __KERNEL__ */ - - -enum nf_ip6_hook_priorities { - NF_IP6_PRI_FIRST = INT_MIN, - NF_IP6_PRI_CONNTRACK_DEFRAG = -400, - NF_IP6_PRI_RAW = -300, - NF_IP6_PRI_SELINUX_FIRST = -225, - NF_IP6_PRI_CONNTRACK = -200, - NF_IP6_PRI_MANGLE = -150, - NF_IP6_PRI_NAT_DST = -100, - NF_IP6_PRI_FILTER = 0, - NF_IP6_PRI_SECURITY = 50, - NF_IP6_PRI_NAT_SRC = 100, - NF_IP6_PRI_SELINUX_LAST = 225, - NF_IP6_PRI_CONNTRACK_HELPER = 300, - NF_IP6_PRI_LAST = INT_MAX, -}; +#include -#ifdef __KERNEL__ #ifdef CONFIG_NETFILTER extern int ip6_route_me_harder(struct sk_buff *skb); @@ -89,6 +22,4 @@ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } #endif /* CONFIG_NETFILTER */ -#endif /* __KERNEL__ */ - #endif /*__LINUX_IP6_NETFILTER_H*/ diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 6d3af05c107c..e0f746b7b95c 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -1,160 +1,12 @@ #ifndef __LINUX_NETLINK_H #define __LINUX_NETLINK_H -#include /* for __kernel_sa_family_t */ -#include - -#define NETLINK_ROUTE 0 /* Routing/device hook */ -#define NETLINK_UNUSED 1 /* Unused number */ -#define NETLINK_USERSOCK 2 /* Reserved for user mode socket protocols */ -#define NETLINK_FIREWALL 3 /* Unused number, formerly ip_queue */ -#define NETLINK_SOCK_DIAG 4 /* socket monitoring */ -#define NETLINK_NFLOG 5 /* netfilter/iptables ULOG */ -#define NETLINK_XFRM 6 /* ipsec */ -#define NETLINK_SELINUX 7 /* SELinux event notifications */ -#define NETLINK_ISCSI 8 /* Open-iSCSI */ -#define NETLINK_AUDIT 9 /* auditing */ -#define NETLINK_FIB_LOOKUP 10 -#define NETLINK_CONNECTOR 11 -#define NETLINK_NETFILTER 12 /* netfilter subsystem */ -#define NETLINK_IP6_FW 13 -#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ -#define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ -#define NETLINK_GENERIC 16 -/* leave room for NETLINK_DM (DM Events) */ -#define NETLINK_SCSITRANSPORT 18 /* SCSI Transports */ -#define NETLINK_ECRYPTFS 19 -#define NETLINK_RDMA 20 -#define NETLINK_CRYPTO 21 /* Crypto layer */ - -#define NETLINK_INET_DIAG NETLINK_SOCK_DIAG - -#define MAX_LINKS 32 - -struct sockaddr_nl { - __kernel_sa_family_t nl_family; /* AF_NETLINK */ - unsigned short nl_pad; /* zero */ - __u32 nl_pid; /* port ID */ - __u32 nl_groups; /* multicast groups mask */ -}; - -struct nlmsghdr { - __u32 nlmsg_len; /* Length of message including header */ - __u16 nlmsg_type; /* Message content */ - __u16 nlmsg_flags; /* Additional flags */ - __u32 nlmsg_seq; /* Sequence number */ - __u32 nlmsg_pid; /* Sending process port ID */ -}; - -/* Flags values */ - -#define NLM_F_REQUEST 1 /* It is request message. */ -#define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */ -#define NLM_F_ACK 4 /* Reply with ack, with zero or error code */ -#define NLM_F_ECHO 8 /* Echo this request */ -#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */ - -/* Modifiers to GET request */ -#define NLM_F_ROOT 0x100 /* specify tree root */ -#define NLM_F_MATCH 0x200 /* return all matching */ -#define NLM_F_ATOMIC 0x400 /* atomic GET */ -#define NLM_F_DUMP (NLM_F_ROOT|NLM_F_MATCH) - -/* Modifiers to NEW request */ -#define NLM_F_REPLACE 0x100 /* Override existing */ -#define NLM_F_EXCL 0x200 /* Do not touch, if it exists */ -#define NLM_F_CREATE 0x400 /* Create, if it does not exist */ -#define NLM_F_APPEND 0x800 /* Add to end of list */ - -/* - 4.4BSD ADD NLM_F_CREATE|NLM_F_EXCL - 4.4BSD CHANGE NLM_F_REPLACE - - True CHANGE NLM_F_CREATE|NLM_F_REPLACE - Append NLM_F_CREATE - Check NLM_F_EXCL - */ - -#define NLMSG_ALIGNTO 4U -#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) ) -#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr))) -#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN)) -#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len)) -#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0))) -#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \ - (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len))) -#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \ - (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \ - (nlh)->nlmsg_len <= (len)) -#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len))) - -#define NLMSG_NOOP 0x1 /* Nothing. */ -#define NLMSG_ERROR 0x2 /* Error */ -#define NLMSG_DONE 0x3 /* End of a dump */ -#define NLMSG_OVERRUN 0x4 /* Data lost */ - -#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */ - -struct nlmsgerr { - int error; - struct nlmsghdr msg; -}; - -#define NETLINK_ADD_MEMBERSHIP 1 -#define NETLINK_DROP_MEMBERSHIP 2 -#define NETLINK_PKTINFO 3 -#define NETLINK_BROADCAST_ERROR 4 -#define NETLINK_NO_ENOBUFS 5 - -struct nl_pktinfo { - __u32 group; -}; - -#define NET_MAJOR 36 /* Major 36 is reserved for networking */ - -enum { - NETLINK_UNCONNECTED = 0, - NETLINK_CONNECTED, -}; - -/* - * <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)--> - * +---------------------+- - -+- - - - - - - - - -+- - -+ - * | Header | Pad | Payload | Pad | - * | (struct nlattr) | ing | | ing | - * +---------------------+- - -+- - - - - - - - - -+- - -+ - * <-------------- nlattr->nla_len --------------> - */ - -struct nlattr { - __u16 nla_len; - __u16 nla_type; -}; - -/* - * nla_type (16 bits) - * +---+---+-------------------------------+ - * | N | O | Attribute Type | - * +---+---+-------------------------------+ - * N := Carries nested attributes - * O := Payload stored in network byte order - * - * Note: The N and O flag are mutually exclusive. - */ -#define NLA_F_NESTED (1 << 15) -#define NLA_F_NET_BYTEORDER (1 << 14) -#define NLA_TYPE_MASK ~(NLA_F_NESTED | NLA_F_NET_BYTEORDER) - -#define NLA_ALIGNTO 4 -#define NLA_ALIGN(len) (((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1)) -#define NLA_HDRLEN ((int) NLA_ALIGN(sizeof(struct nlattr))) - -#ifdef __KERNEL__ #include #include #include #include +#include struct net; @@ -283,6 +135,4 @@ static inline int netlink_dump_start(struct sock *ssk, struct sk_buff *skb, return __netlink_dump_start(ssk, skb, nlh, control); } -#endif /* __KERNEL__ */ - #endif /* __LINUX_NETLINK_H */ diff --git a/include/linux/netrom.h b/include/linux/netrom.h deleted file mode 100644 index af7313cc9cb6..000000000000 --- a/include/linux/netrom.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * These are the public elements of the Linux kernel NET/ROM implementation. - * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the - * definition of the ax25_address structure. - */ - -#ifndef NETROM_KERNEL_H -#define NETROM_KERNEL_H - -#include - -#define NETROM_MTU 236 - -#define NETROM_T1 1 -#define NETROM_T2 2 -#define NETROM_N2 3 -#define NETROM_T4 6 -#define NETROM_IDLE 7 - -#define SIOCNRDECOBS (SIOCPROTOPRIVATE+2) - -struct nr_route_struct { -#define NETROM_NEIGH 0 -#define NETROM_NODE 1 - int type; - ax25_address callsign; - char device[16]; - unsigned int quality; - char mnemonic[7]; - ax25_address neighbour; - unsigned int obs_count; - unsigned int ndigis; - ax25_address digipeaters[AX25_MAX_DIGIS]; -}; - -#endif diff --git a/include/linux/nfc.h b/include/linux/nfc.h deleted file mode 100644 index d908d17da56d..000000000000 --- a/include/linux/nfc.h +++ /dev/null @@ -1,197 +0,0 @@ -/* - * Copyright (C) 2011 Instituto Nokia de Tecnologia - * - * Authors: - * Lauro Ramos Venancio - * Aloisio Almeida Jr - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __LINUX_NFC_H -#define __LINUX_NFC_H - -#include -#include - -#define NFC_GENL_NAME "nfc" -#define NFC_GENL_VERSION 1 - -#define NFC_GENL_MCAST_EVENT_NAME "events" - -/** - * enum nfc_commands - supported nfc commands - * - * @NFC_CMD_UNSPEC: unspecified command - * - * @NFC_CMD_GET_DEVICE: request information about a device (requires - * %NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices - * @NFC_CMD_DEV_UP: turn on the nfc device - * (requires %NFC_ATTR_DEVICE_INDEX) - * @NFC_CMD_DEV_DOWN: turn off the nfc device - * (requires %NFC_ATTR_DEVICE_INDEX) - * @NFC_CMD_START_POLL: start polling for targets using the given protocols - * (requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS) - * @NFC_CMD_STOP_POLL: stop polling for targets (requires - * %NFC_ATTR_DEVICE_INDEX) - * @NFC_CMD_GET_TARGET: dump all targets found by the previous poll (requires - * %NFC_ATTR_DEVICE_INDEX) - * @NFC_EVENT_TARGETS_FOUND: event emitted when a new target is found - * (it sends %NFC_ATTR_DEVICE_INDEX) - * @NFC_EVENT_DEVICE_ADDED: event emitted when a new device is registred - * (it sends %NFC_ATTR_DEVICE_NAME, %NFC_ATTR_DEVICE_INDEX and - * %NFC_ATTR_PROTOCOLS) - * @NFC_EVENT_DEVICE_REMOVED: event emitted when a device is removed - * (it sends %NFC_ATTR_DEVICE_INDEX) - * @NFC_EVENT_TM_ACTIVATED: event emitted when the adapter is activated in - * target mode. - * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated - * from target mode. - */ -enum nfc_commands { - NFC_CMD_UNSPEC, - NFC_CMD_GET_DEVICE, - NFC_CMD_DEV_UP, - NFC_CMD_DEV_DOWN, - NFC_CMD_DEP_LINK_UP, - NFC_CMD_DEP_LINK_DOWN, - NFC_CMD_START_POLL, - NFC_CMD_STOP_POLL, - NFC_CMD_GET_TARGET, - NFC_EVENT_TARGETS_FOUND, - NFC_EVENT_DEVICE_ADDED, - NFC_EVENT_DEVICE_REMOVED, - NFC_EVENT_TARGET_LOST, - NFC_EVENT_TM_ACTIVATED, - NFC_EVENT_TM_DEACTIVATED, -/* private: internal use only */ - __NFC_CMD_AFTER_LAST -}; -#define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1) - -/** - * enum nfc_attrs - supported nfc attributes - * - * @NFC_ATTR_UNSPEC: unspecified attribute - * - * @NFC_ATTR_DEVICE_INDEX: index of nfc device - * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars - * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from - * NFC_PROTO_*_MASK constants - * @NFC_ATTR_TARGET_INDEX: index of the nfc target - * @NFC_ATTR_TARGET_SENS_RES: NFC-A targets extra information such as NFCID - * @NFC_ATTR_TARGET_SEL_RES: NFC-A targets extra information (useful if the - * target is not NFC-Forum compliant) - * @NFC_ATTR_TARGET_NFCID1: NFC-A targets identifier, max 10 bytes - * @NFC_ATTR_TARGET_SENSB_RES: NFC-B targets extra information, max 12 bytes - * @NFC_ATTR_TARGET_SENSF_RES: NFC-F targets extra information, max 18 bytes - * @NFC_ATTR_COMM_MODE: Passive or active mode - * @NFC_ATTR_RF_MODE: Initiator or target - * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for - * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for - */ -enum nfc_attrs { - NFC_ATTR_UNSPEC, - NFC_ATTR_DEVICE_INDEX, - NFC_ATTR_DEVICE_NAME, - NFC_ATTR_PROTOCOLS, - NFC_ATTR_TARGET_INDEX, - NFC_ATTR_TARGET_SENS_RES, - NFC_ATTR_TARGET_SEL_RES, - NFC_ATTR_TARGET_NFCID1, - NFC_ATTR_TARGET_SENSB_RES, - NFC_ATTR_TARGET_SENSF_RES, - NFC_ATTR_COMM_MODE, - NFC_ATTR_RF_MODE, - NFC_ATTR_DEVICE_POWERED, - NFC_ATTR_IM_PROTOCOLS, - NFC_ATTR_TM_PROTOCOLS, -/* private: internal use only */ - __NFC_ATTR_AFTER_LAST -}; -#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1) - -#define NFC_DEVICE_NAME_MAXSIZE 8 -#define NFC_NFCID1_MAXSIZE 10 -#define NFC_SENSB_RES_MAXSIZE 12 -#define NFC_SENSF_RES_MAXSIZE 18 -#define NFC_GB_MAXSIZE 48 - -/* NFC protocols */ -#define NFC_PROTO_JEWEL 1 -#define NFC_PROTO_MIFARE 2 -#define NFC_PROTO_FELICA 3 -#define NFC_PROTO_ISO14443 4 -#define NFC_PROTO_NFC_DEP 5 -#define NFC_PROTO_ISO14443_B 6 - -#define NFC_PROTO_MAX 7 - -/* NFC communication modes */ -#define NFC_COMM_ACTIVE 0 -#define NFC_COMM_PASSIVE 1 - -/* NFC RF modes */ -#define NFC_RF_INITIATOR 0 -#define NFC_RF_TARGET 1 -#define NFC_RF_NONE 2 - -/* NFC protocols masks used in bitsets */ -#define NFC_PROTO_JEWEL_MASK (1 << NFC_PROTO_JEWEL) -#define NFC_PROTO_MIFARE_MASK (1 << NFC_PROTO_MIFARE) -#define NFC_PROTO_FELICA_MASK (1 << NFC_PROTO_FELICA) -#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443) -#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) -#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) - -struct sockaddr_nfc { - sa_family_t sa_family; - __u32 dev_idx; - __u32 target_idx; - __u32 nfc_protocol; -}; - -#define NFC_LLCP_MAX_SERVICE_NAME 63 -struct sockaddr_nfc_llcp { - sa_family_t sa_family; - __u32 dev_idx; - __u32 target_idx; - __u32 nfc_protocol; - __u8 dsap; /* Destination SAP, if known */ - __u8 ssap; /* Source SAP to be bound to */ - char service_name[NFC_LLCP_MAX_SERVICE_NAME]; /* Service name URI */; - size_t service_name_len; -}; - -/* NFC socket protocols */ -#define NFC_SOCKPROTO_RAW 0 -#define NFC_SOCKPROTO_LLCP 1 -#define NFC_SOCKPROTO_MAX 2 - -#define NFC_HEADER_SIZE 1 - -/** - * Pseudo-header info for raw socket packets - * First byte is the adapter index - * Second byte contains flags - * - 0x01 - Direction (0=RX, 1=TX) - * - 0x02-0x80 - Reserved - **/ -#define NFC_LLCP_RAW_HEADER_SIZE 2 -#define NFC_LLCP_DIRECTION_RX 0x00 -#define NFC_LLCP_DIRECTION_TX 0x01 - -#endif /*__LINUX_NFC_H */ diff --git a/include/linux/nfs.h b/include/linux/nfs.h index 6d1fb63f5922..3e794c12e90a 100644 --- a/include/linux/nfs.h +++ b/include/linux/nfs.h @@ -7,130 +7,9 @@ #ifndef _LINUX_NFS_H #define _LINUX_NFS_H -#define NFS_PROGRAM 100003 -#define NFS_PORT 2049 -#define NFS_MAXDATA 8192 -#define NFS_MAXPATHLEN 1024 -#define NFS_MAXNAMLEN 255 -#define NFS_MAXGROUPS 16 -#define NFS_FHSIZE 32 -#define NFS_COOKIESIZE 4 -#define NFS_FIFO_DEV (-1) -#define NFSMODE_FMT 0170000 -#define NFSMODE_DIR 0040000 -#define NFSMODE_CHR 0020000 -#define NFSMODE_BLK 0060000 -#define NFSMODE_REG 0100000 -#define NFSMODE_LNK 0120000 -#define NFSMODE_SOCK 0140000 -#define NFSMODE_FIFO 0010000 - -#define NFS_MNT_PROGRAM 100005 -#define NFS_MNT_VERSION 1 -#define NFS_MNT3_VERSION 3 - -#define NFS_PIPE_DIRNAME "nfs" - -/* - * NFS stats. The good thing with these values is that NFSv3 errors are - * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which - * no-one uses anyway), so we can happily mix code as long as we make sure - * no NFSv3 errors are returned to NFSv2 clients. - * Error codes that have a `--' in the v2 column are not part of the - * standard, but seem to be widely used nevertheless. - */ - enum nfs_stat { - NFS_OK = 0, /* v2 v3 v4 */ - NFSERR_PERM = 1, /* v2 v3 v4 */ - NFSERR_NOENT = 2, /* v2 v3 v4 */ - NFSERR_IO = 5, /* v2 v3 v4 */ - NFSERR_NXIO = 6, /* v2 v3 v4 */ - NFSERR_EAGAIN = 11, /* v2 v3 */ - NFSERR_ACCES = 13, /* v2 v3 v4 */ - NFSERR_EXIST = 17, /* v2 v3 v4 */ - NFSERR_XDEV = 18, /* v3 v4 */ - NFSERR_NODEV = 19, /* v2 v3 v4 */ - NFSERR_NOTDIR = 20, /* v2 v3 v4 */ - NFSERR_ISDIR = 21, /* v2 v3 v4 */ - NFSERR_INVAL = 22, /* v2 v3 v4 */ - NFSERR_FBIG = 27, /* v2 v3 v4 */ - NFSERR_NOSPC = 28, /* v2 v3 v4 */ - NFSERR_ROFS = 30, /* v2 v3 v4 */ - NFSERR_MLINK = 31, /* v3 v4 */ - NFSERR_OPNOTSUPP = 45, /* v2 v3 */ - NFSERR_NAMETOOLONG = 63, /* v2 v3 v4 */ - NFSERR_NOTEMPTY = 66, /* v2 v3 v4 */ - NFSERR_DQUOT = 69, /* v2 v3 v4 */ - NFSERR_STALE = 70, /* v2 v3 v4 */ - NFSERR_REMOTE = 71, /* v2 v3 */ - NFSERR_WFLUSH = 99, /* v2 */ - NFSERR_BADHANDLE = 10001, /* v3 v4 */ - NFSERR_NOT_SYNC = 10002, /* v3 */ - NFSERR_BAD_COOKIE = 10003, /* v3 v4 */ - NFSERR_NOTSUPP = 10004, /* v3 v4 */ - NFSERR_TOOSMALL = 10005, /* v3 v4 */ - NFSERR_SERVERFAULT = 10006, /* v3 v4 */ - NFSERR_BADTYPE = 10007, /* v3 v4 */ - NFSERR_JUKEBOX = 10008, /* v3 v4 */ - NFSERR_SAME = 10009, /* v4 */ - NFSERR_DENIED = 10010, /* v4 */ - NFSERR_EXPIRED = 10011, /* v4 */ - NFSERR_LOCKED = 10012, /* v4 */ - NFSERR_GRACE = 10013, /* v4 */ - NFSERR_FHEXPIRED = 10014, /* v4 */ - NFSERR_SHARE_DENIED = 10015, /* v4 */ - NFSERR_WRONGSEC = 10016, /* v4 */ - NFSERR_CLID_INUSE = 10017, /* v4 */ - NFSERR_RESOURCE = 10018, /* v4 */ - NFSERR_MOVED = 10019, /* v4 */ - NFSERR_NOFILEHANDLE = 10020, /* v4 */ - NFSERR_MINOR_VERS_MISMATCH = 10021, /* v4 */ - NFSERR_STALE_CLIENTID = 10022, /* v4 */ - NFSERR_STALE_STATEID = 10023, /* v4 */ - NFSERR_OLD_STATEID = 10024, /* v4 */ - NFSERR_BAD_STATEID = 10025, /* v4 */ - NFSERR_BAD_SEQID = 10026, /* v4 */ - NFSERR_NOT_SAME = 10027, /* v4 */ - NFSERR_LOCK_RANGE = 10028, /* v4 */ - NFSERR_SYMLINK = 10029, /* v4 */ - NFSERR_RESTOREFH = 10030, /* v4 */ - NFSERR_LEASE_MOVED = 10031, /* v4 */ - NFSERR_ATTRNOTSUPP = 10032, /* v4 */ - NFSERR_NO_GRACE = 10033, /* v4 */ - NFSERR_RECLAIM_BAD = 10034, /* v4 */ - NFSERR_RECLAIM_CONFLICT = 10035,/* v4 */ - NFSERR_BAD_XDR = 10036, /* v4 */ - NFSERR_LOCKS_HELD = 10037, /* v4 */ - NFSERR_OPENMODE = 10038, /* v4 */ - NFSERR_BADOWNER = 10039, /* v4 */ - NFSERR_BADCHAR = 10040, /* v4 */ - NFSERR_BADNAME = 10041, /* v4 */ - NFSERR_BAD_RANGE = 10042, /* v4 */ - NFSERR_LOCK_NOTSUPP = 10043, /* v4 */ - NFSERR_OP_ILLEGAL = 10044, /* v4 */ - NFSERR_DEADLOCK = 10045, /* v4 */ - NFSERR_FILE_OPEN = 10046, /* v4 */ - NFSERR_ADMIN_REVOKED = 10047, /* v4 */ - NFSERR_CB_PATH_DOWN = 10048, /* v4 */ -}; - -/* NFSv2 file types - beware, these are not the same in NFSv3 */ - -enum nfs_ftype { - NFNON = 0, - NFREG = 1, - NFDIR = 2, - NFBLK = 3, - NFCHR = 4, - NFLNK = 5, - NFSOCK = 6, - NFBAD = 7, - NFFIFO = 8 -}; - -#ifdef __KERNEL__ #include #include +#include /* * This is the kernel NFS client file handle representation @@ -169,5 +48,4 @@ enum nfs3_stable_how { NFS_DATA_SYNC = 1, NFS_FILE_SYNC = 2 }; -#endif /* __KERNEL__ */ #endif /* _LINUX_NFS_H */ diff --git a/include/linux/nfs2.h b/include/linux/nfs2.h deleted file mode 100644 index fde24b30cc9e..000000000000 --- a/include/linux/nfs2.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * NFS protocol definitions - * - * This file contains constants for Version 2 of the protocol. - */ -#ifndef _LINUX_NFS2_H -#define _LINUX_NFS2_H - -#define NFS2_PORT 2049 -#define NFS2_MAXDATA 8192 -#define NFS2_MAXPATHLEN 1024 -#define NFS2_MAXNAMLEN 255 -#define NFS2_MAXGROUPS 16 -#define NFS2_FHSIZE 32 -#define NFS2_COOKIESIZE 4 -#define NFS2_FIFO_DEV (-1) -#define NFS2MODE_FMT 0170000 -#define NFS2MODE_DIR 0040000 -#define NFS2MODE_CHR 0020000 -#define NFS2MODE_BLK 0060000 -#define NFS2MODE_REG 0100000 -#define NFS2MODE_LNK 0120000 -#define NFS2MODE_SOCK 0140000 -#define NFS2MODE_FIFO 0010000 - - -/* NFSv2 file types - beware, these are not the same in NFSv3 */ -enum nfs2_ftype { - NF2NON = 0, - NF2REG = 1, - NF2DIR = 2, - NF2BLK = 3, - NF2CHR = 4, - NF2LNK = 5, - NF2SOCK = 6, - NF2BAD = 7, - NF2FIFO = 8 -}; - -struct nfs2_fh { - char data[NFS2_FHSIZE]; -}; - -/* - * Procedure numbers for NFSv2 - */ -#define NFS2_VERSION 2 -#define NFSPROC_NULL 0 -#define NFSPROC_GETATTR 1 -#define NFSPROC_SETATTR 2 -#define NFSPROC_ROOT 3 -#define NFSPROC_LOOKUP 4 -#define NFSPROC_READLINK 5 -#define NFSPROC_READ 6 -#define NFSPROC_WRITECACHE 7 -#define NFSPROC_WRITE 8 -#define NFSPROC_CREATE 9 -#define NFSPROC_REMOVE 10 -#define NFSPROC_RENAME 11 -#define NFSPROC_LINK 12 -#define NFSPROC_SYMLINK 13 -#define NFSPROC_MKDIR 14 -#define NFSPROC_RMDIR 15 -#define NFSPROC_READDIR 16 -#define NFSPROC_STATFS 17 - -#endif /* _LINUX_NFS2_H */ diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h index 6ccfe3b641e1..a778ad8e3afd 100644 --- a/include/linux/nfs3.h +++ b/include/linux/nfs3.h @@ -4,100 +4,10 @@ #ifndef _LINUX_NFS3_H #define _LINUX_NFS3_H -#define NFS3_PORT 2049 -#define NFS3_MAXDATA 32768 -#define NFS3_MAXPATHLEN PATH_MAX -#define NFS3_MAXNAMLEN NAME_MAX -#define NFS3_MAXGROUPS 16 -#define NFS3_FHSIZE 64 -#define NFS3_COOKIESIZE 4 -#define NFS3_CREATEVERFSIZE 8 -#define NFS3_COOKIEVERFSIZE 8 -#define NFS3_WRITEVERFSIZE 8 -#define NFS3_FIFO_DEV (-1) -#define NFS3MODE_FMT 0170000 -#define NFS3MODE_DIR 0040000 -#define NFS3MODE_CHR 0020000 -#define NFS3MODE_BLK 0060000 -#define NFS3MODE_REG 0100000 -#define NFS3MODE_LNK 0120000 -#define NFS3MODE_SOCK 0140000 -#define NFS3MODE_FIFO 0010000 +#include -/* Flags for access() call */ -#define NFS3_ACCESS_READ 0x0001 -#define NFS3_ACCESS_LOOKUP 0x0002 -#define NFS3_ACCESS_MODIFY 0x0004 -#define NFS3_ACCESS_EXTEND 0x0008 -#define NFS3_ACCESS_DELETE 0x0010 -#define NFS3_ACCESS_EXECUTE 0x0020 -#define NFS3_ACCESS_FULL 0x003f - -/* Flags for create mode */ -enum nfs3_createmode { - NFS3_CREATE_UNCHECKED = 0, - NFS3_CREATE_GUARDED = 1, - NFS3_CREATE_EXCLUSIVE = 2 -}; - -/* NFSv3 file system properties */ -#define NFS3_FSF_LINK 0x0001 -#define NFS3_FSF_SYMLINK 0x0002 -#define NFS3_FSF_HOMOGENEOUS 0x0008 -#define NFS3_FSF_CANSETTIME 0x0010 -/* Some shorthands. See fs/nfsd/nfs3proc.c */ -#define NFS3_FSF_DEFAULT 0x001B -#define NFS3_FSF_BILLYBOY 0x0018 -#define NFS3_FSF_READONLY 0x0008 - -enum nfs3_ftype { - NF3NON = 0, - NF3REG = 1, - NF3DIR = 2, - NF3BLK = 3, - NF3CHR = 4, - NF3LNK = 5, - NF3SOCK = 6, - NF3FIFO = 7, /* changed from NFSv2 (was 8) */ - NF3BAD = 8 -}; - -struct nfs3_fh { - unsigned short size; - unsigned char data[NFS3_FHSIZE]; -}; - -#define NFS3_VERSION 3 -#define NFS3PROC_NULL 0 -#define NFS3PROC_GETATTR 1 -#define NFS3PROC_SETATTR 2 -#define NFS3PROC_LOOKUP 3 -#define NFS3PROC_ACCESS 4 -#define NFS3PROC_READLINK 5 -#define NFS3PROC_READ 6 -#define NFS3PROC_WRITE 7 -#define NFS3PROC_CREATE 8 -#define NFS3PROC_MKDIR 9 -#define NFS3PROC_SYMLINK 10 -#define NFS3PROC_MKNOD 11 -#define NFS3PROC_REMOVE 12 -#define NFS3PROC_RMDIR 13 -#define NFS3PROC_RENAME 14 -#define NFS3PROC_LINK 15 -#define NFS3PROC_READDIR 16 -#define NFS3PROC_READDIRPLUS 17 -#define NFS3PROC_FSSTAT 18 -#define NFS3PROC_FSINFO 19 -#define NFS3PROC_PATHCONF 20 -#define NFS3PROC_COMMIT 21 - -#define NFS_MNT3_VERSION 3 - - -#if defined(__KERNEL__) /* Number of 32bit words in post_op_attr */ #define NFS3_POST_OP_ATTR_WORDS 22 -#endif /* __KERNEL__ */ #endif /* _LINUX_NFS3_H */ diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index af2d2fa30eee..e111fa419a4e 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -9,168 +9,11 @@ * Kendrick Smith * Andy Adamson */ - #ifndef _LINUX_NFS4_H #define _LINUX_NFS4_H -#include - -#define NFS4_BITMAP_SIZE 2 -#define NFS4_VERIFIER_SIZE 8 -#define NFS4_STATEID_SEQID_SIZE 4 -#define NFS4_STATEID_OTHER_SIZE 12 -#define NFS4_STATEID_SIZE (NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE) -#define NFS4_FHSIZE 128 -#define NFS4_MAXPATHLEN PATH_MAX -#define NFS4_MAXNAMLEN NAME_MAX -#define NFS4_OPAQUE_LIMIT 1024 -#define NFS4_MAX_SESSIONID_LEN 16 - -#define NFS4_ACCESS_READ 0x0001 -#define NFS4_ACCESS_LOOKUP 0x0002 -#define NFS4_ACCESS_MODIFY 0x0004 -#define NFS4_ACCESS_EXTEND 0x0008 -#define NFS4_ACCESS_DELETE 0x0010 -#define NFS4_ACCESS_EXECUTE 0x0020 - -#define NFS4_FH_PERSISTENT 0x0000 -#define NFS4_FH_NOEXPIRE_WITH_OPEN 0x0001 -#define NFS4_FH_VOLATILE_ANY 0x0002 -#define NFS4_FH_VOL_MIGRATION 0x0004 -#define NFS4_FH_VOL_RENAME 0x0008 - -#define NFS4_OPEN_RESULT_CONFIRM 0x0002 -#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004 - -#define NFS4_SHARE_ACCESS_MASK 0x000F -#define NFS4_SHARE_ACCESS_READ 0x0001 -#define NFS4_SHARE_ACCESS_WRITE 0x0002 -#define NFS4_SHARE_ACCESS_BOTH 0x0003 -#define NFS4_SHARE_DENY_READ 0x0001 -#define NFS4_SHARE_DENY_WRITE 0x0002 -#define NFS4_SHARE_DENY_BOTH 0x0003 - -/* nfs41 */ -#define NFS4_SHARE_WANT_MASK 0xFF00 -#define NFS4_SHARE_WANT_NO_PREFERENCE 0x0000 -#define NFS4_SHARE_WANT_READ_DELEG 0x0100 -#define NFS4_SHARE_WANT_WRITE_DELEG 0x0200 -#define NFS4_SHARE_WANT_ANY_DELEG 0x0300 -#define NFS4_SHARE_WANT_NO_DELEG 0x0400 -#define NFS4_SHARE_WANT_CANCEL 0x0500 - -#define NFS4_SHARE_WHEN_MASK 0xF0000 -#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL 0x10000 -#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED 0x20000 - -#define NFS4_CDFC4_FORE 0x1 -#define NFS4_CDFC4_BACK 0x2 -#define NFS4_CDFC4_BOTH 0x3 -#define NFS4_CDFC4_FORE_OR_BOTH 0x3 -#define NFS4_CDFC4_BACK_OR_BOTH 0x7 - -#define NFS4_CDFS4_FORE 0x1 -#define NFS4_CDFS4_BACK 0x2 -#define NFS4_CDFS4_BOTH 0x3 - -#define NFS4_SET_TO_SERVER_TIME 0 -#define NFS4_SET_TO_CLIENT_TIME 1 - -#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0 -#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE 1 -#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE 2 -#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE 3 - -#define ACL4_SUPPORT_ALLOW_ACL 0x01 -#define ACL4_SUPPORT_DENY_ACL 0x02 -#define ACL4_SUPPORT_AUDIT_ACL 0x04 -#define ACL4_SUPPORT_ALARM_ACL 0x08 - -#define NFS4_ACE_FILE_INHERIT_ACE 0x00000001 -#define NFS4_ACE_DIRECTORY_INHERIT_ACE 0x00000002 -#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE 0x00000004 -#define NFS4_ACE_INHERIT_ONLY_ACE 0x00000008 -#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG 0x00000010 -#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG 0x00000020 -#define NFS4_ACE_IDENTIFIER_GROUP 0x00000040 - -#define NFS4_ACE_READ_DATA 0x00000001 -#define NFS4_ACE_LIST_DIRECTORY 0x00000001 -#define NFS4_ACE_WRITE_DATA 0x00000002 -#define NFS4_ACE_ADD_FILE 0x00000002 -#define NFS4_ACE_APPEND_DATA 0x00000004 -#define NFS4_ACE_ADD_SUBDIRECTORY 0x00000004 -#define NFS4_ACE_READ_NAMED_ATTRS 0x00000008 -#define NFS4_ACE_WRITE_NAMED_ATTRS 0x00000010 -#define NFS4_ACE_EXECUTE 0x00000020 -#define NFS4_ACE_DELETE_CHILD 0x00000040 -#define NFS4_ACE_READ_ATTRIBUTES 0x00000080 -#define NFS4_ACE_WRITE_ATTRIBUTES 0x00000100 -#define NFS4_ACE_DELETE 0x00010000 -#define NFS4_ACE_READ_ACL 0x00020000 -#define NFS4_ACE_WRITE_ACL 0x00040000 -#define NFS4_ACE_WRITE_OWNER 0x00080000 -#define NFS4_ACE_SYNCHRONIZE 0x00100000 -#define NFS4_ACE_GENERIC_READ 0x00120081 -#define NFS4_ACE_GENERIC_WRITE 0x00160106 -#define NFS4_ACE_GENERIC_EXECUTE 0x001200A0 -#define NFS4_ACE_MASK_ALL 0x001F01FF - -#define EXCHGID4_FLAG_SUPP_MOVED_REFER 0x00000001 -#define EXCHGID4_FLAG_SUPP_MOVED_MIGR 0x00000002 -#define EXCHGID4_FLAG_BIND_PRINC_STATEID 0x00000100 - -#define EXCHGID4_FLAG_USE_NON_PNFS 0x00010000 -#define EXCHGID4_FLAG_USE_PNFS_MDS 0x00020000 -#define EXCHGID4_FLAG_USE_PNFS_DS 0x00040000 -#define EXCHGID4_FLAG_MASK_PNFS 0x00070000 - -#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A 0x40000000 -#define EXCHGID4_FLAG_CONFIRMED_R 0x80000000 -/* - * Since the validity of these bits depends on whether - * they're set in the argument or response, have separate - * invalid flag masks for arg (_A) and resp (_R). - */ -#define EXCHGID4_FLAG_MASK_A 0x40070103 -#define EXCHGID4_FLAG_MASK_R 0x80070103 - -#define SEQ4_STATUS_CB_PATH_DOWN 0x00000001 -#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING 0x00000002 -#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED 0x00000004 -#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED 0x00000008 -#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED 0x00000010 -#define SEQ4_STATUS_ADMIN_STATE_REVOKED 0x00000020 -#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED 0x00000040 -#define SEQ4_STATUS_LEASE_MOVED 0x00000080 -#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED 0x00000100 -#define SEQ4_STATUS_CB_PATH_DOWN_SESSION 0x00000200 -#define SEQ4_STATUS_BACKCHANNEL_FAULT 0x00000400 - -#define NFS4_SECINFO_STYLE4_CURRENT_FH 0 -#define NFS4_SECINFO_STYLE4_PARENT 1 - -#define NFS4_MAX_UINT64 (~(u64)0) - -/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations. - * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly. - */ -#define NFS4_MAX_OPS 8 - -/* Our NFS4 client back channel server only wants the cb_sequene and the - * actual operation per compound - */ -#define NFS4_MAX_BACK_CHANNEL_OPS 2 - -enum nfs4_acl_whotype { - NFS4_ACL_WHO_NAMED = 0, - NFS4_ACL_WHO_OWNER, - NFS4_ACL_WHO_GROUP, - NFS4_ACL_WHO_EVERYONE, -}; - -#ifdef __KERNEL__ #include +#include struct nfs4_ace { uint32_t type; @@ -673,10 +516,3 @@ struct nfs4_deviceid { }; #endif -#endif - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/include/linux/nfs4_mount.h b/include/linux/nfs4_mount.h deleted file mode 100644 index a0dcf6655657..000000000000 --- a/include/linux/nfs4_mount.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef _LINUX_NFS4_MOUNT_H -#define _LINUX_NFS4_MOUNT_H - -/* - * linux/include/linux/nfs4_mount.h - * - * Copyright (C) 2002 Trond Myklebust - * - * structure passed from user-space to kernel-space during an nfsv4 mount - */ - -/* - * WARNING! Do not delete or change the order of these fields. If - * a new field is required then add it to the end. The version field - * tracks which fields are present. This will ensure some measure of - * mount-to-kernel version compatibility. Some of these aren't used yet - * but here they are anyway. - */ -#define NFS4_MOUNT_VERSION 1 - -struct nfs_string { - unsigned int len; - const char __user * data; -}; - -struct nfs4_mount_data { - int version; /* 1 */ - int flags; /* 1 */ - int rsize; /* 1 */ - int wsize; /* 1 */ - int timeo; /* 1 */ - int retrans; /* 1 */ - int acregmin; /* 1 */ - int acregmax; /* 1 */ - int acdirmin; /* 1 */ - int acdirmax; /* 1 */ - - /* see the definition of 'struct clientaddr4' in RFC3010 */ - struct nfs_string client_addr; /* 1 */ - - /* Mount path */ - struct nfs_string mnt_path; /* 1 */ - - /* Server details */ - struct nfs_string hostname; /* 1 */ - /* Server IP address */ - unsigned int host_addrlen; /* 1 */ - struct sockaddr __user * host_addr; /* 1 */ - - /* Transport protocol to use */ - int proto; /* 1 */ - - /* Pseudo-flavours to use for authentication. See RFC2623 */ - int auth_flavourlen; /* 1 */ - int __user *auth_flavours; /* 1 */ -}; - -/* bits in the flags field */ -/* Note: the fields that correspond to existing NFSv2/v3 mount options - * should mirror the values from include/linux/nfs_mount.h - */ - -#define NFS4_MOUNT_SOFT 0x0001 /* 1 */ -#define NFS4_MOUNT_INTR 0x0002 /* 1 */ -#define NFS4_MOUNT_NOCTO 0x0010 /* 1 */ -#define NFS4_MOUNT_NOAC 0x0020 /* 1 */ -#define NFS4_MOUNT_STRICTLOCK 0x1000 /* 1 */ -#define NFS4_MOUNT_UNSHARED 0x8000 /* 1 */ -#define NFS4_MOUNT_FLAGMASK 0x9033 - -#endif diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 334a2f5f6bf1..1cc25682b20b 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -5,38 +5,11 @@ * * OS-specific nfs filesystem definitions and declarations */ - #ifndef _LINUX_NFS_FS_H #define _LINUX_NFS_FS_H -#include - -/* Default timeout values */ -#define NFS_DEF_UDP_TIMEO (11) -#define NFS_DEF_UDP_RETRANS (3) -#define NFS_DEF_TCP_TIMEO (600) -#define NFS_DEF_TCP_RETRANS (2) - -#define NFS_MAX_UDP_TIMEOUT (60*HZ) -#define NFS_MAX_TCP_TIMEOUT (600*HZ) +#include -#define NFS_DEF_ACREGMIN (3) -#define NFS_DEF_ACREGMAX (60) -#define NFS_DEF_ACDIRMIN (30) -#define NFS_DEF_ACDIRMAX (60) - -/* - * When flushing a cluster of dirty pages, there can be different - * strategies: - */ -#define FLUSH_SYNC 1 /* file being synced, or contention */ -#define FLUSH_STABLE 4 /* commit to stable storage */ -#define FLUSH_LOWPRI 8 /* low priority background flush */ -#define FLUSH_HIGHPRI 16 /* high priority memory reclaim flush */ -#define FLUSH_COND_STABLE 32 /* conditional stable write - only stable - * if everything fits in one RPC */ - -#ifdef __KERNEL__ /* * Enable dprintk() debugging support for nfs client. @@ -613,29 +586,6 @@ nfs_fileid_to_ino_t(u64 fileid) #define NFS_JUKEBOX_RETRY_TIME (5 * HZ) -#endif /* __KERNEL__ */ - -/* - * NFS debug flags - */ -#define NFSDBG_VFS 0x0001 -#define NFSDBG_DIRCACHE 0x0002 -#define NFSDBG_LOOKUPCACHE 0x0004 -#define NFSDBG_PAGECACHE 0x0008 -#define NFSDBG_PROC 0x0010 -#define NFSDBG_XDR 0x0020 -#define NFSDBG_FILE 0x0040 -#define NFSDBG_ROOT 0x0080 -#define NFSDBG_CALLBACK 0x0100 -#define NFSDBG_CLIENT 0x0200 -#define NFSDBG_MOUNT 0x0400 -#define NFSDBG_FSCACHE 0x0800 -#define NFSDBG_PNFS 0x1000 -#define NFSDBG_PNFS_LD 0x2000 -#define NFSDBG_STATE 0x4000 -#define NFSDBG_ALL 0xFFFF - -#ifdef __KERNEL__ # undef ifdebug # ifdef NFS_DEBUG @@ -645,6 +595,4 @@ nfs_fileid_to_ino_t(u64 fileid) # define ifdebug(fac) if (0) # define NFS_IFDEBUG(x) # endif -#endif /* __KERNEL */ - #endif diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h index ece91c57ad79..2dcef3ab58b6 100644 --- a/include/linux/nfs_idmap.h +++ b/include/linux/nfs_idmap.h @@ -33,35 +33,11 @@ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - #ifndef NFS_IDMAP_H #define NFS_IDMAP_H -#include - -/* XXX from bits/utmp.h */ -#define IDMAP_NAMESZ 128 - -#define IDMAP_TYPE_USER 0 -#define IDMAP_TYPE_GROUP 1 - -#define IDMAP_CONV_IDTONAME 0 -#define IDMAP_CONV_NAMETOID 1 +#include -#define IDMAP_STATUS_INVALIDMSG 0x01 -#define IDMAP_STATUS_AGAIN 0x02 -#define IDMAP_STATUS_LOOKUPFAIL 0x04 -#define IDMAP_STATUS_SUCCESS 0x08 - -struct idmap_msg { - __u8 im_type; - __u8 im_conv; - char im_name[IDMAP_NAMESZ]; - __u32 im_id; - __u8 im_status; -}; - -#ifdef __KERNEL__ /* Forward declaration to make this header independent of others */ struct nfs_client; @@ -97,6 +73,4 @@ int nfs_map_uid_to_name(const struct nfs_server *, __u32, char *, size_t); int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t); extern unsigned int nfs_idmap_cache_timeout; -#endif /* __KERNEL__ */ - #endif /* NFS_IDMAP_H */ diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h deleted file mode 100644 index 576bddd72e04..000000000000 --- a/include/linux/nfs_mount.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _LINUX_NFS_MOUNT_H -#define _LINUX_NFS_MOUNT_H - -/* - * linux/include/linux/nfs_mount.h - * - * Copyright (C) 1992 Rick Sladkey - * - * structure passed from user-space to kernel-space during an nfs mount - */ -#include -#include -#include -#include - -/* - * WARNING! Do not delete or change the order of these fields. If - * a new field is required then add it to the end. The version field - * tracks which fields are present. This will ensure some measure of - * mount-to-kernel version compatibility. Some of these aren't used yet - * but here they are anyway. - */ -#define NFS_MOUNT_VERSION 6 -#define NFS_MAX_CONTEXT_LEN 256 - -struct nfs_mount_data { - int version; /* 1 */ - int fd; /* 1 */ - struct nfs2_fh old_root; /* 1 */ - int flags; /* 1 */ - int rsize; /* 1 */ - int wsize; /* 1 */ - int timeo; /* 1 */ - int retrans; /* 1 */ - int acregmin; /* 1 */ - int acregmax; /* 1 */ - int acdirmin; /* 1 */ - int acdirmax; /* 1 */ - struct sockaddr_in addr; /* 1 */ - char hostname[NFS_MAXNAMLEN + 1]; /* 1 */ - int namlen; /* 2 */ - unsigned int bsize; /* 3 */ - struct nfs3_fh root; /* 4 */ - int pseudoflavor; /* 5 */ - char context[NFS_MAX_CONTEXT_LEN + 1]; /* 6 */ -}; - -/* bits in the flags field visible to user space */ - -#define NFS_MOUNT_SOFT 0x0001 /* 1 */ -#define NFS_MOUNT_INTR 0x0002 /* 1 */ /* now unused, but ABI */ -#define NFS_MOUNT_SECURE 0x0004 /* 1 */ -#define NFS_MOUNT_POSIX 0x0008 /* 1 */ -#define NFS_MOUNT_NOCTO 0x0010 /* 1 */ -#define NFS_MOUNT_NOAC 0x0020 /* 1 */ -#define NFS_MOUNT_TCP 0x0040 /* 2 */ -#define NFS_MOUNT_VER3 0x0080 /* 3 */ -#define NFS_MOUNT_KERBEROS 0x0100 /* 3 */ -#define NFS_MOUNT_NONLM 0x0200 /* 3 */ -#define NFS_MOUNT_BROKEN_SUID 0x0400 /* 4 */ -#define NFS_MOUNT_NOACL 0x0800 /* 4 */ -#define NFS_MOUNT_STRICTLOCK 0x1000 /* reserved for NFSv4 */ -#define NFS_MOUNT_SECFLAVOUR 0x2000 /* 5 */ -#define NFS_MOUNT_NORDIRPLUS 0x4000 /* 5 */ -#define NFS_MOUNT_UNSHARED 0x8000 /* 5 */ -#define NFS_MOUNT_FLAGMASK 0xFFFF - -/* The following are for internal use only */ -#define NFS_MOUNT_LOOKUP_CACHE_NONEG 0x10000 -#define NFS_MOUNT_LOOKUP_CACHE_NONE 0x20000 -#define NFS_MOUNT_NORESVPORT 0x40000 -#define NFS_MOUNT_LEGACY_INTERFACE 0x80000 - -#define NFS_MOUNT_LOCAL_FLOCK 0x100000 -#define NFS_MOUNT_LOCAL_FCNTL 0x200000 - -#endif diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h index fabcb1e5c460..5e69e67b31ab 100644 --- a/include/linux/nfsacl.h +++ b/include/linux/nfsacl.h @@ -6,30 +6,10 @@ #ifndef __LINUX_NFSACL_H #define __LINUX_NFSACL_H -#define NFS_ACL_PROGRAM 100227 - -#define ACLPROC2_GETACL 1 -#define ACLPROC2_SETACL 2 -#define ACLPROC2_GETATTR 3 -#define ACLPROC2_ACCESS 4 - -#define ACLPROC3_GETACL 1 -#define ACLPROC3_SETACL 2 - - -/* Flags for the getacl/setacl mode */ -#define NFS_ACL 0x0001 -#define NFS_ACLCNT 0x0002 -#define NFS_DFACL 0x0004 -#define NFS_DFACLCNT 0x0008 - -/* Flag for Default ACL entries */ -#define NFS_ACL_DEFAULT 0x1000 - -#ifdef __KERNEL__ #include #include +#include /* Maximum number of ACL entries over NFS */ #define NFS_ACL_MAX_ENTRIES 1024 @@ -58,5 +38,4 @@ extern int nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt, struct posix_acl **pacl); -#endif /* __KERNEL__ */ #endif /* __LINUX_NFSACL_H */ diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h deleted file mode 100644 index 7df9b500c804..000000000000 --- a/include/linux/nl80211.h +++ /dev/null @@ -1,3072 +0,0 @@ -#ifndef __LINUX_NL80211_H -#define __LINUX_NL80211_H -/* - * 802.11 netlink interface public header - * - * Copyright 2006-2010 Johannes Berg - * Copyright 2008 Michael Wu - * Copyright 2008 Luis Carlos Cobo - * Copyright 2008 Michael Buesch - * Copyright 2008, 2009 Luis R. Rodriguez - * Copyright 2008 Jouni Malinen - * Copyright 2008 Colin McCabe - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include - -/** - * DOC: Station handling - * - * Stations are added per interface, but a special case exists with VLAN - * interfaces. When a station is bound to an AP interface, it may be moved - * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). - * The station is still assumed to belong to the AP interface it was added - * to. - * - * TODO: need more info? - */ - -/** - * DOC: Frame transmission/registration support - * - * Frame transmission and registration support exists to allow userspace - * management entities such as wpa_supplicant react to management frames - * that are not being handled by the kernel. This includes, for example, - * certain classes of action frames that cannot be handled in the kernel - * for various reasons. - * - * Frame registration is done on a per-interface basis and registrations - * cannot be removed other than by closing the socket. It is possible to - * specify a registration filter to register, for example, only for a - * certain type of action frame. In particular with action frames, those - * that userspace registers for will not be returned as unhandled by the - * driver, so that the registered application has to take responsibility - * for doing that. - * - * The type of frame that can be registered for is also dependent on the - * driver and interface type. The frame types are advertised in wiphy - * attributes so applications know what to expect. - * - * NOTE: When an interface changes type while registrations are active, - * these registrations are ignored until the interface type is - * changed again. This means that changing the interface type can - * lead to a situation that couldn't otherwise be produced, but - * any such registrations will be dormant in the sense that they - * will not be serviced, i.e. they will not receive any frames. - * - * Frame transmission allows userspace to send for example the required - * responses to action frames. It is subject to some sanity checking, - * but many frames can be transmitted. When a frame was transmitted, its - * status is indicated to the sending socket. - * - * For more technical details, see the corresponding command descriptions - * below. - */ - -/** - * DOC: Virtual interface / concurrency capabilities - * - * Some devices are able to operate with virtual MACs, they can have - * more than one virtual interface. The capability handling for this - * is a bit complex though, as there may be a number of restrictions - * on the types of concurrency that are supported. - * - * To start with, each device supports the interface types listed in - * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the - * types there no concurrency is implied. - * - * Once concurrency is desired, more attributes must be observed: - * To start with, since some interface types are purely managed in - * software, like the AP-VLAN type in mac80211 for example, there's - * an additional list of these, they can be added at any time and - * are only restricted by some semantic restrictions (e.g. AP-VLAN - * cannot be added without a corresponding AP interface). This list - * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. - * - * Further, the list of supported combinations is exported. This is - * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, - * it exports a list of "groups", and at any point in time the - * interfaces that are currently active must fall into any one of - * the advertised groups. Within each group, there are restrictions - * on the number of interfaces of different types that are supported - * and also the number of different channels, along with potentially - * some other restrictions. See &enum nl80211_if_combination_attrs. - * - * All together, these attributes define the concurrency of virtual - * interfaces that a given device supports. - */ - -/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors - * - * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. - * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request - * or rename notification. Has attributes %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. - * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes - * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. - * - * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; - * either a dump request on a %NL80211_ATTR_WIPHY or a specific get - * on an %NL80211_ATTR_IFINDEX is supported. - * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. - * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response - * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, - * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also - * be sent from userspace to request creation of a new virtual interface, - * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and - * %NL80211_ATTR_IFNAME. - * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from - * userspace to request deletion of a virtual interface, then requires - * attribute %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. - * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, - * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. - * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. - * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. - * - * @NL80211_CMD_GET_BEACON: (not used) - * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface - * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL - * attributes. For drivers that generate the beacon and probe responses - * internally, the following attributes must be provided: %NL80211_ATTR_IE, - * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. - * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters - * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that - * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, - * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, - * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. - * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. - * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP - * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface - * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP - * - * @NL80211_CMD_GET_STATION: Get station attributes for station identified by - * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_STATION: Set station attributes for station identified by - * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all stations, on the interface identified - * by %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by - * %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by - * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. - * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by - * %NL80211_ATTR_MAC. - * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the - * the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all mesh paths, on the interface identified - * by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by - * %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set - * regulatory domain. - * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command - * after being queried by the kernel. CRDA replies by sending a regulatory - * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our - * current alpha2 if it found a match. It also provides - * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each - * regulatory rule is a nested set of attributes given by - * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and - * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by - * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and - * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. - * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain - * to the specified ISO/IEC 3166-1 alpha2 country code. The core will - * store this as a valid request and then query userspace for it. - * - * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the - * interface identified by %NL80211_ATTR_IFINDEX - * - * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the - * interface identified by %NL80211_ATTR_IFINDEX - * - * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The - * interface is identified with %NL80211_ATTR_IFINDEX and the management - * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be - * added to the end of the specified management frame is specified with - * %NL80211_ATTR_IE. If the command succeeds, the requested data will be - * added to all specified management frames generated by - * kernel/firmware/driver. - * Note: This command has been removed and it is only reserved at this - * point to avoid re-using existing command number. The functionality this - * command was planned for has been provided with cleaner design with the - * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, - * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, - * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. - * - * @NL80211_CMD_GET_SCAN: get scan results - * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters - * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * probe requests at CCK rate or not. - * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to - * NL80211_CMD_GET_SCAN and on the "scan" multicast group) - * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, - * partial scan results may be available - * - * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain - * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. - * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) - * are passed, they are used in the probe requests. For - * broadcast, a broadcast SSID must be passed (ie. an empty - * string). If no SSID is passed, no probe requests are sent and - * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, - * if passed, define which channels should be scanned; if not - * passed, all channels allowed for the current regulatory domain - * are used. Extra IEs can also be passed from the userspace by - * using the %NL80211_ATTR_IE attribute. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT - * if scheduled scan is not running. - * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan - * results available. - * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has - * stopped. The driver may issue this event at any time during a - * scheduled scan. One reason for stopping the scan is if the hardware - * does not support starting an association or a normal scan while running - * a scheduled scan. This event is also sent when the - * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface - * is brought down while a scheduled scan was running. - * - * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation - * or noise level - * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to - * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) - * - * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC - * (for the BSSID) and %NL80211_ATTR_PMKID. - * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC - * (for the BSSID) and %NL80211_ATTR_PMKID. - * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. - * - * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain - * has been changed and provides details of the request information - * that caused the change such as who initiated the regulatory request - * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx - * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if - * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or - * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain - * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is - * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on - * to (%NL80211_ATTR_REG_ALPHA2). - * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon - * has been found while world roaming thus enabling active scan or - * any mode of operation that initiates TX (beacons) on a channel - * where we would not have been able to do either before. As an example - * if you are world roaming (regulatory domain set to world or if your - * driver is using a custom world roaming regulatory domain) and while - * doing a passive scan on the 5 GHz band you find an AP there (if not - * on a DFS channel) you will now be able to actively scan for that AP - * or use AP mode on your card on that same channel. Note that this will - * never be used for channels 1-11 on the 2 GHz band as they are always - * enabled world wide. This beacon hint is only sent if your device had - * either disabled active scanning or beaconing on a channel. We send to - * userspace the wiphy on which we removed a restriction from - * (%NL80211_ATTR_WIPHY) and the channel on which this occurred - * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) - * the beacon hint was processed. - * - * @NL80211_CMD_AUTHENTICATE: authentication request and notification. - * This command is used both as a command (request to authenticate) and - * as an event on the "mlme" multicast group indicating completion of the - * authentication process. - * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the - * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and - * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify - * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. - * When used as an event, this reports reception of an Authentication - * frame in station and IBSS modes when the local MLME processed the - * frame, i.e., it was for the local STA and was received in correct - * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the - * MLME SAP interface (kernel providing MLME, userspace SME). The - * included %NL80211_ATTR_FRAME attribute contains the management frame - * (including both the header and frame body, but not FCS). This event is - * also used to indicate if the authentication attempt timed out. In that - * case the %NL80211_ATTR_FRAME attribute is replaced with a - * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which - * pending authentication timed out). - * @NL80211_CMD_ASSOCIATE: association request and notification; like - * NL80211_CMD_AUTHENTICATE but for Association and Reassociation - * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, - * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). - * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like - * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to - * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication - * primitives). - * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like - * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to - * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). - * - * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael - * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the - * event includes %NL80211_ATTR_MAC to describe the source MAC address of - * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key - * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and - * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this - * event matches with MLME-MICHAELMICFAILURE.indication() primitive - * - * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a - * FREQ attribute (for the initial frequency if no peer can be found) - * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those - * should be fixed rather than automatically determined. Can only be - * executed on a network interface that is UP, and fixed BSSID/FREQ - * may be rejected. Another optional parameter is the beacon interval, - * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not - * given defaults to 100 TU (102.4ms). - * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is - * determined by the network interface. - * - * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute - * to identify the device, and the TESTDATA blob attribute to pass through - * to the driver. - * - * @NL80211_CMD_CONNECT: connection request and notification; this command - * requests to connect to a specified network but without separating - * auth and assoc steps. For this, you need to specify the SSID in a - * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. - * Background scan period can optionally be - * specified in %NL80211_ATTR_BG_SCAN_PERIOD, - * if not specified default background scan configuration - * in driver is used and if period value is 0, bg scan will be disabled. - * This attribute is ignored if driver does not support roam scan. - * It is also sent as an event, with the BSSID and response IEs when the - * connection is established or failed to be established. This can be - * determined by the STATUS_CODE attribute. - * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), - * sent as an event when the card/driver roamed by itself. - * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify - * userspace that a connection was dropped by the AP or due to other - * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and - * %NL80211_ATTR_REASON_CODE attributes are used. - * - * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices - * associated with this wiphy must be down and will follow. - * - * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified - * channel for the specified amount of time. This can be used to do - * off-channel operations like transmit a Public Action frame and wait for - * a response while being associated to an AP on another channel. - * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus - * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. - * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds - * to remain on the channel. This command is also used as an event to - * notify when the requested duration starts (it may take a while for the - * driver to schedule this time due to other concurrent needs for the - * radio). - * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) - * that will be included with any events pertaining to this request; - * the cookie is also used to cancel the request. - * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a - * pending remain-on-channel duration if the desired operation has been - * completed prior to expiration of the originally requested duration. - * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the - * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to - * uniquely identify the request. - * This command is also used as an event to notify when a requested - * remain-on-channel duration has expired. - * - * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX - * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface - * and @NL80211_ATTR_TX_RATES the set of allowed rates. - * - * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames - * (via @NL80211_CMD_FRAME) for processing in userspace. This command - * requires an interface index, a frame type attribute (optional for - * backward compatibility reasons, if not given assumes action frames) - * and a match attribute containing the first few bytes of the frame - * that should match, e.g. a single byte for only a category match or - * four bytes for vendor frames including the OUI. The registration - * cannot be dropped, but is removed automatically when the netlink - * socket is closed. Multiple registrations can be made. - * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for - * backward compatibility - * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This - * command is used both as a request to transmit a management frame and - * as an event indicating reception of a frame that was not processed in - * kernel code, but is for us (i.e., which may need to be processed in a - * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time - * specified using %NL80211_ATTR_DURATION. When called, this operation - * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the - * TX status event pertaining to the TX request. - * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * management frames at CCK rate or not in 2GHz band. - * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this - * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. - * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. - * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame - * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies - * the TX command and %NL80211_ATTR_FRAME includes the contents of the - * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged - * the frame. - * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for - * backward compatibility. - * - * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE - * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE - * - * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command - * is used to configure connection quality monitoring notification trigger - * levels. - * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This - * command is used as an event to indicate the that a trigger level was - * reached. - * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. - * In case multiple channels are supported by the device, the mechanism - * with which it switches channels is implementation-defined. - * When a monitor interface is given, it can only switch channel while - * no other interfaces are operating to avoid disturbing the operation - * of any other interfaces, and other interfaces will again take - * precedence when they are used. - * - * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. - * - * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial - * mesh config parameters may be given. - * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the - * network is determined by the network interface. - * - * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame - * notification. This event is used to indicate that an unprotected - * deauthentication frame was dropped when MFP is in use. - * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame - * notification. This event is used to indicate that an unprotected - * disassociation frame was dropped when MFP is in use. - * - * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a - * beacon or probe response from a compatible mesh peer. This is only - * sent while no station information (sta_info) exists for the new peer - * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On - * reception of this notification, userspace may decide to create a new - * station (@NL80211_CMD_NEW_STATION). To stop this notification from - * reoccurring, the userspace authentication daemon may want to create the - * new station with the AUTHENTICATED flag unset and maybe change it later - * depending on the authentication result. - * - * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. - * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. - * Since wireless is more complex than wired ethernet, it supports - * various triggers. These triggers can be configured through this - * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For - * more background information, see - * http://wireless.kernel.org/en/users/Documentation/WoWLAN. - * - * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver - * the necessary information for supporting GTK rekey offload. This - * feature is typically used during WoWLAN. The configuration data - * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and - * contains the data in sub-attributes). After rekeying happened, - * this command may also be sent by the driver as an MLME event to - * inform userspace of the new replay counter. - * - * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace - * of PMKSA caching dandidates. - * - * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). - * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. - * - * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP - * (or GO) interface (i.e. hostapd) to ask for unexpected frames to - * implement sending deauth to stations that send unexpected class 3 - * frames. Also used as the event sent by the kernel when such a frame - * is received. - * For the event, the %NL80211_ATTR_MAC attribute carries the TA and - * other attributes like the interface index are present. - * If used as the command it must have an interface index and you can - * only unsubscribe from the event by closing the socket. Subscription - * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. - * - * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the - * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame - * and wasn't already in a 4-addr VLAN. The event will be sent similarly - * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. - * - * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface - * by sending a null data frame to it and reporting when the frame is - * acknowleged. This is used to allow timing out inactive clients. Uses - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a - * direct reply with an %NL80211_ATTR_COOKIE that is later used to match - * up the event with the request. The event includes the same data and - * has %NL80211_ATTR_ACK set if the frame was ACKed. - * - * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from - * other BSSes when any interfaces are in AP mode. This helps implement - * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME - * messages. Note that per PHY only one application may register. - * - * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether - * No Acknowledgement Policy should be applied. - * - * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels - * independently of the userspace SME, send this event indicating - * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. - * - * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by - * its %NL80211_ATTR_WDEV identifier. It must have been created with - * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the - * P2P Device can be used for P2P operations, e.g. remain-on-channel and - * public action frame TX. - * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by - * its %NL80211_ATTR_WDEV identifier. - * - * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to - * notify userspace that AP has rejected the connection request from a - * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON - * is used for this. - * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -enum nl80211_commands { -/* don't change the order or add anything between, this is ABI! */ - NL80211_CMD_UNSPEC, - - NL80211_CMD_GET_WIPHY, /* can dump */ - NL80211_CMD_SET_WIPHY, - NL80211_CMD_NEW_WIPHY, - NL80211_CMD_DEL_WIPHY, - - NL80211_CMD_GET_INTERFACE, /* can dump */ - NL80211_CMD_SET_INTERFACE, - NL80211_CMD_NEW_INTERFACE, - NL80211_CMD_DEL_INTERFACE, - - NL80211_CMD_GET_KEY, - NL80211_CMD_SET_KEY, - NL80211_CMD_NEW_KEY, - NL80211_CMD_DEL_KEY, - - NL80211_CMD_GET_BEACON, - NL80211_CMD_SET_BEACON, - NL80211_CMD_START_AP, - NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, - NL80211_CMD_STOP_AP, - NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, - - NL80211_CMD_GET_STATION, - NL80211_CMD_SET_STATION, - NL80211_CMD_NEW_STATION, - NL80211_CMD_DEL_STATION, - - NL80211_CMD_GET_MPATH, - NL80211_CMD_SET_MPATH, - NL80211_CMD_NEW_MPATH, - NL80211_CMD_DEL_MPATH, - - NL80211_CMD_SET_BSS, - - NL80211_CMD_SET_REG, - NL80211_CMD_REQ_SET_REG, - - NL80211_CMD_GET_MESH_CONFIG, - NL80211_CMD_SET_MESH_CONFIG, - - NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, - - NL80211_CMD_GET_REG, - - NL80211_CMD_GET_SCAN, - NL80211_CMD_TRIGGER_SCAN, - NL80211_CMD_NEW_SCAN_RESULTS, - NL80211_CMD_SCAN_ABORTED, - - NL80211_CMD_REG_CHANGE, - - NL80211_CMD_AUTHENTICATE, - NL80211_CMD_ASSOCIATE, - NL80211_CMD_DEAUTHENTICATE, - NL80211_CMD_DISASSOCIATE, - - NL80211_CMD_MICHAEL_MIC_FAILURE, - - NL80211_CMD_REG_BEACON_HINT, - - NL80211_CMD_JOIN_IBSS, - NL80211_CMD_LEAVE_IBSS, - - NL80211_CMD_TESTMODE, - - NL80211_CMD_CONNECT, - NL80211_CMD_ROAM, - NL80211_CMD_DISCONNECT, - - NL80211_CMD_SET_WIPHY_NETNS, - - NL80211_CMD_GET_SURVEY, - NL80211_CMD_NEW_SURVEY_RESULTS, - - NL80211_CMD_SET_PMKSA, - NL80211_CMD_DEL_PMKSA, - NL80211_CMD_FLUSH_PMKSA, - - NL80211_CMD_REMAIN_ON_CHANNEL, - NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, - - NL80211_CMD_SET_TX_BITRATE_MASK, - - NL80211_CMD_REGISTER_FRAME, - NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, - NL80211_CMD_FRAME, - NL80211_CMD_ACTION = NL80211_CMD_FRAME, - NL80211_CMD_FRAME_TX_STATUS, - NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, - - NL80211_CMD_SET_POWER_SAVE, - NL80211_CMD_GET_POWER_SAVE, - - NL80211_CMD_SET_CQM, - NL80211_CMD_NOTIFY_CQM, - - NL80211_CMD_SET_CHANNEL, - NL80211_CMD_SET_WDS_PEER, - - NL80211_CMD_FRAME_WAIT_CANCEL, - - NL80211_CMD_JOIN_MESH, - NL80211_CMD_LEAVE_MESH, - - NL80211_CMD_UNPROT_DEAUTHENTICATE, - NL80211_CMD_UNPROT_DISASSOCIATE, - - NL80211_CMD_NEW_PEER_CANDIDATE, - - NL80211_CMD_GET_WOWLAN, - NL80211_CMD_SET_WOWLAN, - - NL80211_CMD_START_SCHED_SCAN, - NL80211_CMD_STOP_SCHED_SCAN, - NL80211_CMD_SCHED_SCAN_RESULTS, - NL80211_CMD_SCHED_SCAN_STOPPED, - - NL80211_CMD_SET_REKEY_OFFLOAD, - - NL80211_CMD_PMKSA_CANDIDATE, - - NL80211_CMD_TDLS_OPER, - NL80211_CMD_TDLS_MGMT, - - NL80211_CMD_UNEXPECTED_FRAME, - - NL80211_CMD_PROBE_CLIENT, - - NL80211_CMD_REGISTER_BEACONS, - - NL80211_CMD_UNEXPECTED_4ADDR_FRAME, - - NL80211_CMD_SET_NOACK_MAP, - - NL80211_CMD_CH_SWITCH_NOTIFY, - - NL80211_CMD_START_P2P_DEVICE, - NL80211_CMD_STOP_P2P_DEVICE, - - NL80211_CMD_CONN_FAILED, - - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ - __NL80211_CMD_AFTER_LAST, - NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 -}; - -/* - * Allow user space programs to use #ifdef on new commands by defining them - * here - */ -#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS -#define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE -#define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE -#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE -#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE -#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE -#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE -#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT - -#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS - -/* source-level API compatibility */ -#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG -#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG -#define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE - -/** - * enum nl80211_attrs - nl80211 netlink attributes - * - * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors - * - * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. - * /sys/class/ieee80211//index - * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) - * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): - * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including - * this attribute) - * NL80211_CHAN_HT20 = HT20 only - * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel - * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel - * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is - * less than or equal to the RTS threshold; allowed range: 1..255; - * dot11ShortRetryLimit; u8 - * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is - * greater than the RTS threshold; allowed range: 1..255; - * dot11ShortLongLimit; u8 - * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum - * length in octets for frames; allowed range: 256..8000, disable - * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 - * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length - * larger than or equal to this use RTS/CTS handshake); allowed range: - * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 - * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 - * section 7.3.2.9; dot11CoverageClass; u8 - * - * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on - * @NL80211_ATTR_IFNAME: network interface name - * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype - * - * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices - * that don't have a netdev (u64) - * - * @NL80211_ATTR_MAC: MAC address (various uses) - * - * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of - * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC - * keys - * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) - * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 - * section 7.3.2.25.1, e.g. 0x000FAC04) - * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and - * CCMP keys, each six bytes in little endian - * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key - * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the - * default management key - * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or - * other commands, indicates which pairwise cipher suites are used - * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or - * other commands, indicates which group cipher suite is used - * - * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU - * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing - * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE - * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE - * - * @NL80211_ATTR_STA_AID: Association ID for the station (u16) - * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) - * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by - * IEEE 802.11 7.3.1.6 (u16). - * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported - * rates as defined by IEEE 802.11 7.3.2.2 but without the length - * restriction (at most %NL80211_MAX_SUPP_RATES). - * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station - * to, or the AP interface the station was originally added to to. - * @NL80211_ATTR_STA_INFO: information about a station, part of station info - * given for %NL80211_CMD_GET_STATION, nested attribute containing - * info as possible, see &enum nl80211_sta_info. - * - * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, - * consisting of a nested array. - * - * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). - * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. - * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. - * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path - * info given for %NL80211_CMD_GET_MPATH, nested attribute described at - * &enum nl80211_mpath_info. - * - * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_mntr_flags. - * - * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the - * current regulatory domain should be set to or is already set to. - * For example, 'CR', for Costa Rica. This attribute is used by the kernel - * to query the CRDA to retrieve one regulatory domain. This attribute can - * also be used by userspace to query the kernel for the currently set - * regulatory domain. We chose an alpha2 as that is also used by the - * IEEE-802.11d country information element to identify a country. - * Users can also simply ask the wireless core to set regulatory domain - * to a specific alpha2. - * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory - * rules. - * - * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) - * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled - * (u8, 0 or 1) - * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled - * (u8, 0 or 1) - * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic - * rates in format defined by IEEE 802.11 7.3.2.2 but without the length - * restriction (at most %NL80211_MAX_SUPP_RATES). - * - * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from - * association request when used with NL80211_CMD_NEW_STATION) - * - * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all - * supported interface types, each a flag attribute with the number - * of the interface mode. - * - * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for - * %NL80211_CMD_SET_MGMT_EXTRA_IE. - * - * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with - * %NL80211_CMD_SET_MGMT_EXTRA_IE). - * - * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with - * a single scan request, a wiphy attribute. - * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can - * scan with a single scheduled scan request, a wiphy attribute. - * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements - * that can be added to a scan request - * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information - * elements that can be added to a scheduled scan request - * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be - * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. - * - * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) - * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive - * scanning and include a zero-length SSID (wildcard) for wildcard scan - * @NL80211_ATTR_BSS: scan result BSS - * - * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain - * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* - * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently - * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) - * - * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies - * an array of command numbers (i.e. a mapping index to command number) - * that the driver for the given wiphy supports. - * - * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header - * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and - * NL80211_CMD_ASSOCIATE events - * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) - * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, - * represented as a u32 - * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and - * %NL80211_CMD_DISASSOCIATE, u16 - * - * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as - * a u32 - * - * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _before_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* - * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change - * due to considerations from a beacon hint. This attribute reflects - * the state of the channel _after_ the beacon hint processing. This - * attributes consists of a nested attribute containing - * NL80211_FREQUENCY_ATTR_* - * - * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported - * cipher suites - * - * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look - * for other networks on different channels - * - * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this - * is used, e.g., with %NL80211_CMD_AUTHENTICATE event - * - * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is - * used for the association (&enum nl80211_mfp, represented as a u32); - * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request - * - * @NL80211_ATTR_STA_FLAGS2: Attribute containing a - * &struct nl80211_sta_flag_update. - * - * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls - * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in - * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE - * request, the driver will assume that the port is unauthorized until - * authorized by user space. Otherwise, port is marked authorized by - * default in station mode. - * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the - * ethertype that will be used for key negotiation. It can be - * specified with the associate and connect commands. If it is not - * specified, the value defaults to 0x888E (PAE, 802.1X). This - * attribute is also used as a flag in the wiphy information to - * indicate that protocols other than PAE are supported. - * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with - * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom - * ethertype frames used for key negotiation must not be encrypted. - * - * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. - * We recommend using nested, driver-specific attributes within this. - * - * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT - * event was due to the AP disconnecting the station, and not due to - * a local disconnect request. - * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT - * event (u16) - * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. This is also used with NEW_BEACON to - * indicate that the BSS is to use protection. - * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON - * to indicate which unicast key ciphers will be used with the connection - * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which group key cipher will be used with the connection (a - * u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which WPA version(s) the AP we want to associate with is using - * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to - * indicate which key management algorithm(s) to use (an array of u32). - * - * @NL80211_ATTR_REQ_IE: (Re)association request information elements as - * sent out by the card, for ROAM and successful CONNECT events. - * @NL80211_ATTR_RESP_IE: (Re)association response information elements as - * sent by peer, for ROAM and successful CONNECT events. - * - * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE - * commands to specify using a reassociate frame - * - * @NL80211_ATTR_KEY: key information in a nested attribute with - * %NL80211_KEY_* sub-attributes - * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() - * and join_ibss(), key information is in a nested attribute each - * with %NL80211_KEY_* sub-attributes - * - * @NL80211_ATTR_PID: Process ID of a network namespace. - * - * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for - * dumps. This number increases whenever the object list being - * dumped changes, and as such userspace can verify that it has - * obtained a complete and consistent snapshot by verifying that - * all dump messages contain the same generation number. If it - * changed then the list changed and the dump should be repeated - * completely from scratch. - * - * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface - * - * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of - * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute - * containing info as possible, see &enum survey_info. - * - * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. - * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can - * cache, a wiphy attribute. - * - * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. - * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that - * specifies the maximum duration that can be requested with the - * remain-on-channel operation, in milliseconds, u32. - * - * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. - * - * @NL80211_ATTR_TX_RATES: Nested set of attributes - * (enum nl80211_tx_rate_attributes) describing TX rates per band. The - * enum nl80211_band value is used as the index (nla_type() of the nested - * data. If a band is not included, it will be configured to allow all - * rates based on negotiated supported rates information. This attribute - * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. - * - * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain - * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. - * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the - * @NL80211_CMD_REGISTER_FRAME command. - * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a - * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing - * information about which frame types can be transmitted with - * %NL80211_CMD_FRAME. - * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a - * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing - * information about which frame types can be registered for RX. - * - * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was - * acknowledged by the recipient. - * - * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. - * - * @NL80211_ATTR_CQM: connection quality monitor configuration in a - * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. - * - * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command - * is requesting a local authentication/association state change without - * invoking actual management frame exchange. This can be used with - * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, - * NL80211_CMD_DISASSOCIATE. - * - * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations - * connected to this BSS. - * - * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See - * &enum nl80211_tx_power_setting for possible values. - * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. - * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING - * for non-automatic settings. - * - * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly - * means support for per-station GTKs. - * - * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. - * This can be used to mask out antennas which are not attached or should - * not be used for transmitting. If an antenna is not selected in this - * bitmap the hardware is not allowed to transmit on this antenna. - * - * Each bit represents one antenna, starting with antenna 1 at the first - * bit. Depending on which antennas are selected in the bitmap, 802.11n - * drivers can derive which chainmasks to use (if all antennas belonging to - * a particular chain are disabled this chain should be disabled) and if - * a chain has diversity antennas wether diversity should be used or not. - * HT capabilities (STBC, TX Beamforming, Antenna selection) can be - * derived from the available chains after applying the antenna mask. - * Non-802.11n drivers can derive wether to use diversity or not. - * Drivers may reject configurations or RX/TX mask combinations they cannot - * support by returning -EINVAL. - * - * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. - * This can be used to mask out antennas which are not attached or should - * not be used for receiving. If an antenna is not selected in this bitmap - * the hardware should not be configured to receive on this antenna. - * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. - * - * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available - * for configuration as TX antennas via the above parameters. - * - * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available - * for configuration as RX antennas via the above parameters. - * - * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS - * - * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be - * transmitted on another channel when the channel given doesn't match - * the current channel. If the current channel doesn't match and this - * flag isn't set, the frame will be rejected. This is also used as an - * nl80211 capability flag. - * - * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) - * - * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags - * attributes, specifying what a key should be set as default as. - * See &enum nl80211_key_default_types. - * - * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be - * changed once the mesh is active. - * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute - * containing attributes from &enum nl80211_meshconf_params. - * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver - * allows auth frames in a mesh to be passed to userspace for processing via - * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as - * defined in &enum nl80211_plink_state. Used when userspace is - * driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. - * - * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy - * capabilities, the supported WoWLAN triggers - * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to - * indicate which WoW triggers should be enabled. This is also - * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN - * triggers. - * - * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan - * cycles, in msecs. - * - * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more - * sets of attributes to match during scheduled scans. Only BSSs - * that match any of the sets will be reported. These are - * pass-thru filter rules. - * For a match to succeed, the BSS must match all attributes of a - * set. Since not every hardware supports matching all types of - * attributes, there is no guarantee that the reported BSSs are - * fully complying with the match sets and userspace needs to be - * able to ignore them by itself. - * Thus, the implementation is somewhat hardware-dependent, but - * this is only an optimization and the userspace application - * needs to handle all the non-filtered results anyway. - * If the match attributes don't make sense when combined with - * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID - * is included in the probe request, but the match attributes - * will never let it go through), -EINVAL may be returned. - * If ommited, no filtering is done. - * - * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported - * interface combinations. In each nested item, it contains attributes - * defined in &enum nl80211_if_combination_attrs. - * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like - * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that - * are managed in software: interfaces of these types aren't subject to - * any restrictions in their number or combinations. - * - * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information - * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. - * - * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, - * nested array attribute containing an entry for each band, with the entry - * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but - * without the length restriction (at most %NL80211_MAX_SUPP_RATES). - * - * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon - * and Probe Response (when response to wildcard Probe Request); see - * &enum nl80211_hidden_ssid, represented as a u32 - * - * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. - * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to - * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the - * driver (or firmware) replies to Probe Request frames. - * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association - * Response frames. This is used with %NL80211_CMD_NEW_BEACON and - * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into - * (Re)Association Response frames when the driver (or firmware) replies to - * (Re)Association Request frames. - * - * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration - * of the station, see &enum nl80211_sta_wme_attr. - * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working - * as AP. - * - * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of - * roaming to another AP in the same ESS if the signal lever is low. - * - * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching - * candidate information, see &enum nl80211_pmksa_candidate_attr. - * - * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not - * for management frames transmission. In order to avoid p2p probe/action - * frames are being transmitted at CCK rate in 2GHz band, the user space - * applications use this attribute. - * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and - * %NL80211_CMD_FRAME commands. - * - * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup - * request, link setup confirm, link teardown, etc.). Values are - * described in the TDLS (802.11z) specification. - * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a - * TDLS conversation between two devices. - * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see - * &enum nl80211_tdls_operation, represented as a u8. - * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate - * as a TDLS peer sta. - * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown - * procedures should be performed by sending TDLS packets via - * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be - * used for asking the driver to perform a TDLS operation. - * - * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices - * that have AP support to indicate that they have the AP SME integrated - * with support for the features listed in this attribute, see - * &enum nl80211_ap_sme_features. - * - * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells - * the driver to not wait for an acknowledgement. Note that due to this, - * it will also not give a status callback nor return a cookie. This is - * mostly useful for probe responses to save airtime. - * - * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from - * &enum nl80211_feature_flags and is advertised in wiphy information. - * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe - * requests while operating in AP-mode. - * This attribute holds a bitmap of the supported protocols for - * offloading (see &enum nl80211_probe_resp_offload_support_attr). - * - * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire - * probe-response frame. The DA field in the 802.11 header is zero-ed out, - * to be filled by the FW. - * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable - * this feature. Currently, only supported in mac80211 drivers. - * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the - * ATTR_HT_CAPABILITY to which attention should be paid. - * Currently, only mac80211 NICs support this feature. - * The values that may be configured are: - * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 - * AMPDU density and AMPDU factor. - * All values are treated as suggestions and may be ignored - * by the driver as required. The actual values may be seen in - * the station debugfs ht_caps file. - * - * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country - * abides to when initiating radiation on DFS channels. A country maps - * to one DFS region. - * - * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of - * up to 16 TIDs. - * - * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be - * used by the drivers which has MLME in firmware and does not have support - * to report per station tx/rx activity to free up the staion entry from - * the list. This needs to be used when the driver advertises the - * capability to timeout the stations. - * - * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); - * this attribute is (depending on the driver capabilities) added to - * received frames indicated with %NL80211_CMD_FRAME. - * - * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds - * or 0 to disable background scan. - * - * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from - * userspace. If unset it is assumed the hint comes directly from - * a user. If set code could specify exactly what type of source - * was used to provide the hint. For the different types of - * allowed user regulatory hints see nl80211_user_reg_hint_type. - * - * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected - * the connection request from a station. nl80211_connect_failed_reason - * enum has different reasons of connection failure. - * - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use - */ -enum nl80211_attrs { -/* don't change the order or add anything between, this is ABI! */ - NL80211_ATTR_UNSPEC, - - NL80211_ATTR_WIPHY, - NL80211_ATTR_WIPHY_NAME, - - NL80211_ATTR_IFINDEX, - NL80211_ATTR_IFNAME, - NL80211_ATTR_IFTYPE, - - NL80211_ATTR_MAC, - - NL80211_ATTR_KEY_DATA, - NL80211_ATTR_KEY_IDX, - NL80211_ATTR_KEY_CIPHER, - NL80211_ATTR_KEY_SEQ, - NL80211_ATTR_KEY_DEFAULT, - - NL80211_ATTR_BEACON_INTERVAL, - NL80211_ATTR_DTIM_PERIOD, - NL80211_ATTR_BEACON_HEAD, - NL80211_ATTR_BEACON_TAIL, - - NL80211_ATTR_STA_AID, - NL80211_ATTR_STA_FLAGS, - NL80211_ATTR_STA_LISTEN_INTERVAL, - NL80211_ATTR_STA_SUPPORTED_RATES, - NL80211_ATTR_STA_VLAN, - NL80211_ATTR_STA_INFO, - - NL80211_ATTR_WIPHY_BANDS, - - NL80211_ATTR_MNTR_FLAGS, - - NL80211_ATTR_MESH_ID, - NL80211_ATTR_STA_PLINK_ACTION, - NL80211_ATTR_MPATH_NEXT_HOP, - NL80211_ATTR_MPATH_INFO, - - NL80211_ATTR_BSS_CTS_PROT, - NL80211_ATTR_BSS_SHORT_PREAMBLE, - NL80211_ATTR_BSS_SHORT_SLOT_TIME, - - NL80211_ATTR_HT_CAPABILITY, - - NL80211_ATTR_SUPPORTED_IFTYPES, - - NL80211_ATTR_REG_ALPHA2, - NL80211_ATTR_REG_RULES, - - NL80211_ATTR_MESH_CONFIG, - - NL80211_ATTR_BSS_BASIC_RATES, - - NL80211_ATTR_WIPHY_TXQ_PARAMS, - NL80211_ATTR_WIPHY_FREQ, - NL80211_ATTR_WIPHY_CHANNEL_TYPE, - - NL80211_ATTR_KEY_DEFAULT_MGMT, - - NL80211_ATTR_MGMT_SUBTYPE, - NL80211_ATTR_IE, - - NL80211_ATTR_MAX_NUM_SCAN_SSIDS, - - NL80211_ATTR_SCAN_FREQUENCIES, - NL80211_ATTR_SCAN_SSIDS, - NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ - NL80211_ATTR_BSS, - - NL80211_ATTR_REG_INITIATOR, - NL80211_ATTR_REG_TYPE, - - NL80211_ATTR_SUPPORTED_COMMANDS, - - NL80211_ATTR_FRAME, - NL80211_ATTR_SSID, - NL80211_ATTR_AUTH_TYPE, - NL80211_ATTR_REASON_CODE, - - NL80211_ATTR_KEY_TYPE, - - NL80211_ATTR_MAX_SCAN_IE_LEN, - NL80211_ATTR_CIPHER_SUITES, - - NL80211_ATTR_FREQ_BEFORE, - NL80211_ATTR_FREQ_AFTER, - - NL80211_ATTR_FREQ_FIXED, - - - NL80211_ATTR_WIPHY_RETRY_SHORT, - NL80211_ATTR_WIPHY_RETRY_LONG, - NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - NL80211_ATTR_WIPHY_RTS_THRESHOLD, - - NL80211_ATTR_TIMED_OUT, - - NL80211_ATTR_USE_MFP, - - NL80211_ATTR_STA_FLAGS2, - - NL80211_ATTR_CONTROL_PORT, - - NL80211_ATTR_TESTDATA, - - NL80211_ATTR_PRIVACY, - - NL80211_ATTR_DISCONNECTED_BY_AP, - NL80211_ATTR_STATUS_CODE, - - NL80211_ATTR_CIPHER_SUITES_PAIRWISE, - NL80211_ATTR_CIPHER_SUITE_GROUP, - NL80211_ATTR_WPA_VERSIONS, - NL80211_ATTR_AKM_SUITES, - - NL80211_ATTR_REQ_IE, - NL80211_ATTR_RESP_IE, - - NL80211_ATTR_PREV_BSSID, - - NL80211_ATTR_KEY, - NL80211_ATTR_KEYS, - - NL80211_ATTR_PID, - - NL80211_ATTR_4ADDR, - - NL80211_ATTR_SURVEY_INFO, - - NL80211_ATTR_PMKID, - NL80211_ATTR_MAX_NUM_PMKIDS, - - NL80211_ATTR_DURATION, - - NL80211_ATTR_COOKIE, - - NL80211_ATTR_WIPHY_COVERAGE_CLASS, - - NL80211_ATTR_TX_RATES, - - NL80211_ATTR_FRAME_MATCH, - - NL80211_ATTR_ACK, - - NL80211_ATTR_PS_STATE, - - NL80211_ATTR_CQM, - - NL80211_ATTR_LOCAL_STATE_CHANGE, - - NL80211_ATTR_AP_ISOLATE, - - NL80211_ATTR_WIPHY_TX_POWER_SETTING, - NL80211_ATTR_WIPHY_TX_POWER_LEVEL, - - NL80211_ATTR_TX_FRAME_TYPES, - NL80211_ATTR_RX_FRAME_TYPES, - NL80211_ATTR_FRAME_TYPE, - - NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, - - NL80211_ATTR_SUPPORT_IBSS_RSN, - - NL80211_ATTR_WIPHY_ANTENNA_TX, - NL80211_ATTR_WIPHY_ANTENNA_RX, - - NL80211_ATTR_MCAST_RATE, - - NL80211_ATTR_OFFCHANNEL_TX_OK, - - NL80211_ATTR_BSS_HT_OPMODE, - - NL80211_ATTR_KEY_DEFAULT_TYPES, - - NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, - - NL80211_ATTR_MESH_SETUP, - - NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, - NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, - - NL80211_ATTR_SUPPORT_MESH_AUTH, - NL80211_ATTR_STA_PLINK_STATE, - - NL80211_ATTR_WOWLAN_TRIGGERS, - NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, - - NL80211_ATTR_SCHED_SCAN_INTERVAL, - - NL80211_ATTR_INTERFACE_COMBINATIONS, - NL80211_ATTR_SOFTWARE_IFTYPES, - - NL80211_ATTR_REKEY_DATA, - - NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, - NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, - - NL80211_ATTR_SCAN_SUPP_RATES, - - NL80211_ATTR_HIDDEN_SSID, - - NL80211_ATTR_IE_PROBE_RESP, - NL80211_ATTR_IE_ASSOC_RESP, - - NL80211_ATTR_STA_WME, - NL80211_ATTR_SUPPORT_AP_UAPSD, - - NL80211_ATTR_ROAM_SUPPORT, - - NL80211_ATTR_SCHED_SCAN_MATCH, - NL80211_ATTR_MAX_MATCH_SETS, - - NL80211_ATTR_PMKSA_CANDIDATE, - - NL80211_ATTR_TX_NO_CCK_RATE, - - NL80211_ATTR_TDLS_ACTION, - NL80211_ATTR_TDLS_DIALOG_TOKEN, - NL80211_ATTR_TDLS_OPERATION, - NL80211_ATTR_TDLS_SUPPORT, - NL80211_ATTR_TDLS_EXTERNAL_SETUP, - - NL80211_ATTR_DEVICE_AP_SME, - - NL80211_ATTR_DONT_WAIT_FOR_ACK, - - NL80211_ATTR_FEATURE_FLAGS, - - NL80211_ATTR_PROBE_RESP_OFFLOAD, - - NL80211_ATTR_PROBE_RESP, - - NL80211_ATTR_DFS_REGION, - - NL80211_ATTR_DISABLE_HT, - NL80211_ATTR_HT_CAPABILITY_MASK, - - NL80211_ATTR_NOACK_MAP, - - NL80211_ATTR_INACTIVITY_TIMEOUT, - - NL80211_ATTR_RX_SIGNAL_DBM, - - NL80211_ATTR_BG_SCAN_PERIOD, - - NL80211_ATTR_WDEV, - - NL80211_ATTR_USER_REG_HINT_TYPE, - - NL80211_ATTR_CONN_FAILED_REASON, - - /* add attributes here, update the policy in nl80211.c */ - - __NL80211_ATTR_AFTER_LAST, - NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 -}; - -/* source-level API compatibility */ -#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION -#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG - -/* - * Allow user space programs to use #ifdef on new attributes by defining them - * here - */ -#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT -#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY -#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES -#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS -#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ -#define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE -#define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE -#define NL80211_ATTR_IE NL80211_ATTR_IE -#define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR -#define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE -#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME -#define NL80211_ATTR_SSID NL80211_ATTR_SSID -#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE -#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE -#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE -#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP -#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS -#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES -#define NL80211_ATTR_KEY NL80211_ATTR_KEY -#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS -#define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS - -#define NL80211_MAX_SUPP_RATES 32 -#define NL80211_MAX_SUPP_HT_RATES 77 -#define NL80211_MAX_SUPP_REG_RULES 32 -#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 -#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 -#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 -#define NL80211_HT_CAPABILITY_LEN 26 - -#define NL80211_MAX_NR_CIPHER_SUITES 5 -#define NL80211_MAX_NR_AKM_SUITES 2 - -#define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 - -/* default RSSI threshold for scan results if none specified. */ -#define NL80211_SCAN_RSSI_THOLD_OFF -300 - -#define NL80211_CQM_TXE_MAX_INTVL 1800 - -/** - * enum nl80211_iftype - (virtual) interface types - * - * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides - * @NL80211_IFTYPE_ADHOC: independent BSS member - * @NL80211_IFTYPE_STATION: managed BSS member - * @NL80211_IFTYPE_AP: access point - * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces - * are a bit special in that they must always be tied to a pre-existing - * AP type interface. - * @NL80211_IFTYPE_WDS: wireless distribution interface - * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames - * @NL80211_IFTYPE_MESH_POINT: mesh point - * @NL80211_IFTYPE_P2P_CLIENT: P2P client - * @NL80211_IFTYPE_P2P_GO: P2P group owner - * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev - * and therefore can't be created in the normal ways, use the - * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE - * commands to create and destroy one - * @NL80211_IFTYPE_MAX: highest interface type number currently defined - * @NUM_NL80211_IFTYPES: number of defined interface types - * - * These values are used with the %NL80211_ATTR_IFTYPE - * to set the type of an interface. - * - */ -enum nl80211_iftype { - NL80211_IFTYPE_UNSPECIFIED, - NL80211_IFTYPE_ADHOC, - NL80211_IFTYPE_STATION, - NL80211_IFTYPE_AP, - NL80211_IFTYPE_AP_VLAN, - NL80211_IFTYPE_WDS, - NL80211_IFTYPE_MONITOR, - NL80211_IFTYPE_MESH_POINT, - NL80211_IFTYPE_P2P_CLIENT, - NL80211_IFTYPE_P2P_GO, - NL80211_IFTYPE_P2P_DEVICE, - - /* keep last */ - NUM_NL80211_IFTYPES, - NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 -}; - -/** - * enum nl80211_sta_flags - station flags - * - * Station flags. When a station is added to an AP interface, it is - * assumed to be already associated (and hence authenticated.) - * - * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved - * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) - * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames - * with short barker preamble - * @NL80211_STA_FLAG_WME: station is WME/QoS capable - * @NL80211_STA_FLAG_MFP: station uses management frame protection - * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated - * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should - * only be used in managed mode (even in the flags mask). Note that the - * flag can't be changed, it is only valid while adding a station, and - * attempts to change it will silently be ignored (rather than rejected - * as errors.) - * @NL80211_STA_FLAG_MAX: highest station flag number currently defined - * @__NL80211_STA_FLAG_AFTER_LAST: internal use - */ -enum nl80211_sta_flags { - __NL80211_STA_FLAG_INVALID, - NL80211_STA_FLAG_AUTHORIZED, - NL80211_STA_FLAG_SHORT_PREAMBLE, - NL80211_STA_FLAG_WME, - NL80211_STA_FLAG_MFP, - NL80211_STA_FLAG_AUTHENTICATED, - NL80211_STA_FLAG_TDLS_PEER, - - /* keep last */ - __NL80211_STA_FLAG_AFTER_LAST, - NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 -}; - -#define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER - -/** - * struct nl80211_sta_flag_update - station flags mask/set - * @mask: mask of station flags to set - * @set: which values to set them to - * - * Both mask and set contain bits as per &enum nl80211_sta_flags. - */ -struct nl80211_sta_flag_update { - __u32 mask; - __u32 set; -} __attribute__((packed)); - -/** - * enum nl80211_rate_info - bitrate information - * - * These attribute types are used with %NL80211_STA_INFO_TXRATE - * when getting information about the bitrate of a station. - * There are 2 attributes for bitrate, a legacy one that represents - * a 16-bit value, and new one that represents a 32-bit value. - * If the rate value fits into 16 bit, both attributes are reported - * with the same value. If the rate is too high to fit into 16 bits - * (>6.5535Gbps) only 32-bit attribute is included. - * User space tools encouraged to use the 32-bit attribute and fall - * back to the 16-bit one for compatibility with older kernels. - * - * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved - * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) - * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate - * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval - * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) - * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined - * @__NL80211_RATE_INFO_AFTER_LAST: internal use - */ -enum nl80211_rate_info { - __NL80211_RATE_INFO_INVALID, - NL80211_RATE_INFO_BITRATE, - NL80211_RATE_INFO_MCS, - NL80211_RATE_INFO_40_MHZ_WIDTH, - NL80211_RATE_INFO_SHORT_GI, - NL80211_RATE_INFO_BITRATE32, - - /* keep last */ - __NL80211_RATE_INFO_AFTER_LAST, - NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sta_bss_param - BSS information collected by STA - * - * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM - * when getting information about the bitrate of a station. - * - * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved - * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) - * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled - * (flag) - * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled - * (flag) - * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) - * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) - * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined - * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use - */ -enum nl80211_sta_bss_param { - __NL80211_STA_BSS_PARAM_INVALID, - NL80211_STA_BSS_PARAM_CTS_PROT, - NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, - NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, - NL80211_STA_BSS_PARAM_DTIM_PERIOD, - NL80211_STA_BSS_PARAM_BEACON_INTERVAL, - - /* keep last */ - __NL80211_STA_BSS_PARAM_AFTER_LAST, - NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sta_info - station information - * - * These attribute types are used with %NL80211_ATTR_STA_INFO - * when getting information about a station. - * - * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved - * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) - * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) - * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) - * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) - * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info - * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) - * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this - * station) - * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) - * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) - * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) - * @NL80211_STA_INFO_LLID: the station's mesh LLID - * @NL80211_STA_INFO_PLID: the station's mesh PLID - * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station - * (see %enum nl80211_plink_state) - * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested - * attribute, like NL80211_STA_INFO_TX_BITRATE. - * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute - * containing info as possible, see &enum nl80211_sta_bss_param - * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected - * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. - * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) - * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) - * @__NL80211_STA_INFO_AFTER_LAST: internal - * @NL80211_STA_INFO_MAX: highest possible station info attribute - */ -enum nl80211_sta_info { - __NL80211_STA_INFO_INVALID, - NL80211_STA_INFO_INACTIVE_TIME, - NL80211_STA_INFO_RX_BYTES, - NL80211_STA_INFO_TX_BYTES, - NL80211_STA_INFO_LLID, - NL80211_STA_INFO_PLID, - NL80211_STA_INFO_PLINK_STATE, - NL80211_STA_INFO_SIGNAL, - NL80211_STA_INFO_TX_BITRATE, - NL80211_STA_INFO_RX_PACKETS, - NL80211_STA_INFO_TX_PACKETS, - NL80211_STA_INFO_TX_RETRIES, - NL80211_STA_INFO_TX_FAILED, - NL80211_STA_INFO_SIGNAL_AVG, - NL80211_STA_INFO_RX_BITRATE, - NL80211_STA_INFO_BSS_PARAM, - NL80211_STA_INFO_CONNECTED_TIME, - NL80211_STA_INFO_STA_FLAGS, - NL80211_STA_INFO_BEACON_LOSS, - NL80211_STA_INFO_T_OFFSET, - - /* keep last */ - __NL80211_STA_INFO_AFTER_LAST, - NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mpath_flags - nl80211 mesh path flags - * - * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active - * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running - * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN - * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set - * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded - */ -enum nl80211_mpath_flags { - NL80211_MPATH_FLAG_ACTIVE = 1<<0, - NL80211_MPATH_FLAG_RESOLVING = 1<<1, - NL80211_MPATH_FLAG_SN_VALID = 1<<2, - NL80211_MPATH_FLAG_FIXED = 1<<3, - NL80211_MPATH_FLAG_RESOLVED = 1<<4, -}; - -/** - * enum nl80211_mpath_info - mesh path information - * - * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting - * information about a mesh path. - * - * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved - * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination - * @NL80211_MPATH_INFO_SN: destination sequence number - * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path - * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now - * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in - * &enum nl80211_mpath_flags; - * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec - * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries - * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number - * currently defind - * @__NL80211_MPATH_INFO_AFTER_LAST: internal use - */ -enum nl80211_mpath_info { - __NL80211_MPATH_INFO_INVALID, - NL80211_MPATH_INFO_FRAME_QLEN, - NL80211_MPATH_INFO_SN, - NL80211_MPATH_INFO_METRIC, - NL80211_MPATH_INFO_EXPTIME, - NL80211_MPATH_INFO_FLAGS, - NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, - NL80211_MPATH_INFO_DISCOVERY_RETRIES, - - /* keep last */ - __NL80211_MPATH_INFO_AFTER_LAST, - NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_band_attr - band attributes - * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, - * an array of nested frequency attributes - * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, - * an array of nested bitrate attributes - * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as - * defined in 802.11n - * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE - * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n - * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n - * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as - * defined in 802.11ac - * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE - * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined - * @__NL80211_BAND_ATTR_AFTER_LAST: internal use - */ -enum nl80211_band_attr { - __NL80211_BAND_ATTR_INVALID, - NL80211_BAND_ATTR_FREQS, - NL80211_BAND_ATTR_RATES, - - NL80211_BAND_ATTR_HT_MCS_SET, - NL80211_BAND_ATTR_HT_CAPA, - NL80211_BAND_ATTR_HT_AMPDU_FACTOR, - NL80211_BAND_ATTR_HT_AMPDU_DENSITY, - - NL80211_BAND_ATTR_VHT_MCS_SET, - NL80211_BAND_ATTR_VHT_CAPA, - - /* keep last */ - __NL80211_BAND_ATTR_AFTER_LAST, - NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 -}; - -#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA - -/** - * enum nl80211_frequency_attr - frequency attributes - * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz - * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current - * regulatory domain. - * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is - * permitted on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted - * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory - * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm - * (100 * dBm). - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use - */ -enum nl80211_frequency_attr { - __NL80211_FREQUENCY_ATTR_INVALID, - NL80211_FREQUENCY_ATTR_FREQ, - NL80211_FREQUENCY_ATTR_DISABLED, - NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, - NL80211_FREQUENCY_ATTR_NO_IBSS, - NL80211_FREQUENCY_ATTR_RADAR, - NL80211_FREQUENCY_ATTR_MAX_TX_POWER, - - /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, - NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 -}; - -#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER - -/** - * enum nl80211_bitrate_attr - bitrate attributes - * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps - * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported - * in 2.4 GHz band. - * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number - * currently defined - * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use - */ -enum nl80211_bitrate_attr { - __NL80211_BITRATE_ATTR_INVALID, - NL80211_BITRATE_ATTR_RATE, - NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, - - /* keep last */ - __NL80211_BITRATE_ATTR_AFTER_LAST, - NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_initiator - Indicates the initiator of a reg domain request - * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world - * regulatory domain. - * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the - * regulatory domain. - * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the - * wireless core it thinks its knows the regulatory domain we should be in. - * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an - * 802.11 country information element with regulatory information it - * thinks we should consider. cfg80211 only processes the country - * code from the IE, and relies on the regulatory domain information - * structure passed by userspace (CRDA) from our wireless-regdb. - * If a channel is enabled but the country code indicates it should - * be disabled we disable the channel and re-enable it upon disassociation. - */ -enum nl80211_reg_initiator { - NL80211_REGDOM_SET_BY_CORE, - NL80211_REGDOM_SET_BY_USER, - NL80211_REGDOM_SET_BY_DRIVER, - NL80211_REGDOM_SET_BY_COUNTRY_IE, -}; - -/** - * enum nl80211_reg_type - specifies the type of regulatory domain - * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains - * to a specific country. When this is set you can count on the - * ISO / IEC 3166 alpha2 country code being valid. - * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory - * domain. - * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom - * driver specific world regulatory domain. These do not apply system-wide - * and are only applicable to the individual devices which have requested - * them to be applied. - * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product - * of an intersection between two regulatory domains -- the previously - * set regulatory domain on the system and the last accepted regulatory - * domain request to be processed. - */ -enum nl80211_reg_type { - NL80211_REGDOM_TYPE_COUNTRY, - NL80211_REGDOM_TYPE_WORLD, - NL80211_REGDOM_TYPE_CUSTOM_WORLD, - NL80211_REGDOM_TYPE_INTERSECTION, -}; - -/** - * enum nl80211_reg_rule_attr - regulatory rule attributes - * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional - * considerations for a given frequency range. These are the - * &enum nl80211_reg_rule_flags. - * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory - * rule in KHz. This is not a center of frequency but an actual regulatory - * band edge. - * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule - * in KHz. This is not a center a frequency but an actual regulatory - * band edge. - * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. - * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain - * for a given frequency range. The value is in mBi (100 * dBi). - * If you don't have one then don't send this. - * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for - * a given frequency range. The value is in mBm (100 * dBm). - * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number - * currently defined - * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use - */ -enum nl80211_reg_rule_attr { - __NL80211_REG_RULE_ATTR_INVALID, - NL80211_ATTR_REG_RULE_FLAGS, - - NL80211_ATTR_FREQ_RANGE_START, - NL80211_ATTR_FREQ_RANGE_END, - NL80211_ATTR_FREQ_RANGE_MAX_BW, - - NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, - NL80211_ATTR_POWER_RULE_MAX_EIRP, - - /* keep last */ - __NL80211_REG_RULE_ATTR_AFTER_LAST, - NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_sched_scan_match_attr - scheduled scan match attributes - * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved - * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, - * only report BSS with matching SSID. - * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a - * BSS in scan results. Filtering is turned off if not specified. - * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter - * attribute number currently defined - * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use - */ -enum nl80211_sched_scan_match_attr { - __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, - - NL80211_SCHED_SCAN_MATCH_ATTR_SSID, - NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, - - /* keep last */ - __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, - NL80211_SCHED_SCAN_MATCH_ATTR_MAX = - __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 -}; - -/* only for backward compatibility */ -#define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID - -/** - * enum nl80211_reg_rule_flags - regulatory rule flags - * - * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed - * @NL80211_RRF_NO_CCK: CCK modulation not allowed - * @NL80211_RRF_NO_INDOOR: indoor operation not allowed - * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed - * @NL80211_RRF_DFS: DFS support is required to be used - * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links - * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links - * @NL80211_RRF_PASSIVE_SCAN: passive scan is required - * @NL80211_RRF_NO_IBSS: no IBSS is allowed - */ -enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, - NL80211_RRF_NO_CCK = 1<<1, - NL80211_RRF_NO_INDOOR = 1<<2, - NL80211_RRF_NO_OUTDOOR = 1<<3, - NL80211_RRF_DFS = 1<<4, - NL80211_RRF_PTP_ONLY = 1<<5, - NL80211_RRF_PTMP_ONLY = 1<<6, - NL80211_RRF_PASSIVE_SCAN = 1<<7, - NL80211_RRF_NO_IBSS = 1<<8, -}; - -/** - * enum nl80211_dfs_regions - regulatory DFS regions - * - * @NL80211_DFS_UNSET: Country has no DFS master region specified - * @NL80211_DFS_FCC: Country follows DFS master rules from FCC - * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI - * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec - */ -enum nl80211_dfs_regions { - NL80211_DFS_UNSET = 0, - NL80211_DFS_FCC = 1, - NL80211_DFS_ETSI = 2, - NL80211_DFS_JP = 3, -}; - -/** - * enum nl80211_user_reg_hint_type - type of user regulatory hint - * - * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always - * assumed if the attribute is not set. - * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular - * base station. Device drivers that have been tested to work - * properly to support this type of hint can enable these hints - * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature - * capability on the struct wiphy. The wireless core will - * ignore all cell base station hints until at least one device - * present has been registered with the wireless core that - * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a - * supported feature. - */ -enum nl80211_user_reg_hint_type { - NL80211_USER_REG_HINT_USER = 0, - NL80211_USER_REG_HINT_CELL_BASE = 1, -}; - -/** - * enum nl80211_survey_info - survey information - * - * These attribute types are used with %NL80211_ATTR_SURVEY_INFO - * when getting information about a survey. - * - * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved - * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel - * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) - * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used - * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio - * spent on this channel - * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary - * channel was sensed busy (either due to activity or energy detect) - * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension - * channel was sensed busy - * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent - * receiving data - * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent - * transmitting data - * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number - * currently defined - * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use - */ -enum nl80211_survey_info { - __NL80211_SURVEY_INFO_INVALID, - NL80211_SURVEY_INFO_FREQUENCY, - NL80211_SURVEY_INFO_NOISE, - NL80211_SURVEY_INFO_IN_USE, - NL80211_SURVEY_INFO_CHANNEL_TIME, - NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, - NL80211_SURVEY_INFO_CHANNEL_TIME_RX, - NL80211_SURVEY_INFO_CHANNEL_TIME_TX, - - /* keep last */ - __NL80211_SURVEY_INFO_AFTER_LAST, - NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mntr_flags - monitor configuration flags - * - * Monitor configuration flags. - * - * @__NL80211_MNTR_FLAG_INVALID: reserved - * - * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS - * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP - * @NL80211_MNTR_FLAG_CONTROL: pass control frames - * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering - * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. - * overrides all other flags. - * - * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use - * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag - */ -enum nl80211_mntr_flags { - __NL80211_MNTR_FLAG_INVALID, - NL80211_MNTR_FLAG_FCSFAIL, - NL80211_MNTR_FLAG_PLCPFAIL, - NL80211_MNTR_FLAG_CONTROL, - NL80211_MNTR_FLAG_OTHER_BSS, - NL80211_MNTR_FLAG_COOK_FRAMES, - - /* keep last */ - __NL80211_MNTR_FLAG_AFTER_LAST, - NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 -}; - -/** - * enum nl80211_meshconf_params - mesh configuration parameters - * - * Mesh configuration parameters. These can be changed while the mesh is - * active. - * - * @__NL80211_MESHCONF_INVALID: internal use - * - * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message - * - * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link - * - * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units - * - * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface - * - * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh - * - * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. - * - * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. - * - * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) - * - * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) - * - * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) - * - * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from - * the root to be valid. (TU = time unit) - * - * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element - * - * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the - * mesh - * - * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not - * - * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. - * - * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. - * - * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. - * - * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. - * - * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) - * - * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method - * (see 11C.12.2.2) - * - * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute - * - * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for - * which mesh STAs receiving a proactive PREQ shall consider the forwarding - * information to the root mesh STA to be valid. - * - * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between - * proactive PREQs are transmitted. - * - * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time - * (in TUs) during which a mesh STA can send only one Action frame - * containing a PREQ element for root path confirmation. - * - * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use - */ -enum nl80211_meshconf_params { - __NL80211_MESHCONF_INVALID, - NL80211_MESHCONF_RETRY_TIMEOUT, - NL80211_MESHCONF_CONFIRM_TIMEOUT, - NL80211_MESHCONF_HOLDING_TIMEOUT, - NL80211_MESHCONF_MAX_PEER_LINKS, - NL80211_MESHCONF_MAX_RETRIES, - NL80211_MESHCONF_TTL, - NL80211_MESHCONF_AUTO_OPEN_PLINKS, - NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, - NL80211_MESHCONF_PATH_REFRESH_TIME, - NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, - NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, - NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, - NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, - NL80211_MESHCONF_HWMP_ROOTMODE, - NL80211_MESHCONF_ELEMENT_TTL, - NL80211_MESHCONF_HWMP_RANN_INTERVAL, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, - NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, - NL80211_MESHCONF_FORWARDING, - NL80211_MESHCONF_RSSI_THRESHOLD, - NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, - NL80211_MESHCONF_HT_OPMODE, - NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, - NL80211_MESHCONF_HWMP_ROOT_INTERVAL, - NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, - - /* keep last */ - __NL80211_MESHCONF_ATTR_AFTER_LAST, - NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_mesh_setup_params - mesh setup parameters - * - * Mesh setup parameters. These are used to start/join a mesh and cannot be - * changed while the mesh is active. - * - * @__NL80211_MESH_SETUP_INVALID: Internal use - * - * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the - * default HWMP. - * - * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. - * - * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element - * that vendors will use to identify the path selection methods and - * metrics in use. - * - * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. - * - * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of - * Mesh Peering Management (MPM) and is implemented with the assistance of - * a userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and - * key management). When the flag is unset (default), the kernel can - * autonomously complete (unsecured) mesh peering without the need of a - * userspace daemon. - * - * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number - * - * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use - */ -enum nl80211_mesh_setup_params { - __NL80211_MESH_SETUP_INVALID, - NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, - NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, - NL80211_MESH_SETUP_IE, - NL80211_MESH_SETUP_USERSPACE_AUTH, - NL80211_MESH_SETUP_USERSPACE_AMPE, - NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, - - /* keep last */ - __NL80211_MESH_SETUP_ATTR_AFTER_LAST, - NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 -}; - -/** - * enum nl80211_txq_attr - TX queue parameter attributes - * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved - * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) - * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning - * disabled - * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form - * 2^n-1 in the range 1..32767] - * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form - * 2^n-1 in the range 1..32767] - * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] - * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal - * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number - */ -enum nl80211_txq_attr { - __NL80211_TXQ_ATTR_INVALID, - NL80211_TXQ_ATTR_AC, - NL80211_TXQ_ATTR_TXOP, - NL80211_TXQ_ATTR_CWMIN, - NL80211_TXQ_ATTR_CWMAX, - NL80211_TXQ_ATTR_AIFS, - - /* keep last */ - __NL80211_TXQ_ATTR_AFTER_LAST, - NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 -}; - -enum nl80211_ac { - NL80211_AC_VO, - NL80211_AC_VI, - NL80211_AC_BE, - NL80211_AC_BK, - NL80211_NUM_ACS -}; - -/* backward compat */ -#define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC -#define NL80211_TXQ_Q_VO NL80211_AC_VO -#define NL80211_TXQ_Q_VI NL80211_AC_VI -#define NL80211_TXQ_Q_BE NL80211_AC_BE -#define NL80211_TXQ_Q_BK NL80211_AC_BK - -enum nl80211_channel_type { - NL80211_CHAN_NO_HT, - NL80211_CHAN_HT20, - NL80211_CHAN_HT40MINUS, - NL80211_CHAN_HT40PLUS -}; - -/** - * enum nl80211_bss - netlink attributes for a BSS - * - * @__NL80211_BSS_INVALID: invalid - * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) - * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) - * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) - * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) - * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) - * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the - * raw information elements from the probe response/beacon (bin); - * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are - * from a Probe Response frame; otherwise they are from a Beacon frame. - * However, if the driver does not indicate the source of the IEs, these - * IEs may be from either frame subtype. - * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon - * in mBm (100 * dBm) (s32) - * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon - * in unspecified units, scaled to 0..100 (u8) - * @NL80211_BSS_STATUS: status, if this BSS is "used" - * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms - * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information - * elements from a Beacon frame (bin); not present if no Beacon frame has - * yet been received - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -enum nl80211_bss { - __NL80211_BSS_INVALID, - NL80211_BSS_BSSID, - NL80211_BSS_FREQUENCY, - NL80211_BSS_TSF, - NL80211_BSS_BEACON_INTERVAL, - NL80211_BSS_CAPABILITY, - NL80211_BSS_INFORMATION_ELEMENTS, - NL80211_BSS_SIGNAL_MBM, - NL80211_BSS_SIGNAL_UNSPEC, - NL80211_BSS_STATUS, - NL80211_BSS_SEEN_MS_AGO, - NL80211_BSS_BEACON_IES, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, - NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 -}; - -/** - * enum nl80211_bss_status - BSS "status" - * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. - * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. - * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. - * - * The BSS status is a BSS attribute in scan dumps, which - * indicates the status the interface has wrt. this BSS. - */ -enum nl80211_bss_status { - NL80211_BSS_STATUS_AUTHENTICATED, - NL80211_BSS_STATUS_ASSOCIATED, - NL80211_BSS_STATUS_IBSS_JOINED, -}; - -/** - * enum nl80211_auth_type - AuthenticationType - * - * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication - * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) - * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) - * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) - * @__NL80211_AUTHTYPE_NUM: internal - * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm - * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by - * trying multiple times); this is invalid in netlink -- leave out - * the attribute for this on CONNECT commands. - */ -enum nl80211_auth_type { - NL80211_AUTHTYPE_OPEN_SYSTEM, - NL80211_AUTHTYPE_SHARED_KEY, - NL80211_AUTHTYPE_FT, - NL80211_AUTHTYPE_NETWORK_EAP, - - /* keep last */ - __NL80211_AUTHTYPE_NUM, - NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, - NL80211_AUTHTYPE_AUTOMATIC -}; - -/** - * enum nl80211_key_type - Key Type - * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key - * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key - * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) - * @NUM_NL80211_KEYTYPES: number of defined key types - */ -enum nl80211_key_type { - NL80211_KEYTYPE_GROUP, - NL80211_KEYTYPE_PAIRWISE, - NL80211_KEYTYPE_PEERKEY, - - NUM_NL80211_KEYTYPES -}; - -/** - * enum nl80211_mfp - Management frame protection state - * @NL80211_MFP_NO: Management frame protection not used - * @NL80211_MFP_REQUIRED: Management frame protection required - */ -enum nl80211_mfp { - NL80211_MFP_NO, - NL80211_MFP_REQUIRED, -}; - -enum nl80211_wpa_versions { - NL80211_WPA_VERSION_1 = 1 << 0, - NL80211_WPA_VERSION_2 = 1 << 1, -}; - -/** - * enum nl80211_key_default_types - key default types - * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid - * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default - * unicast key - * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default - * multicast key - * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types - */ -enum nl80211_key_default_types { - __NL80211_KEY_DEFAULT_TYPE_INVALID, - NL80211_KEY_DEFAULT_TYPE_UNICAST, - NL80211_KEY_DEFAULT_TYPE_MULTICAST, - - NUM_NL80211_KEY_DEFAULT_TYPES -}; - -/** - * enum nl80211_key_attributes - key attributes - * @__NL80211_KEY_INVALID: invalid - * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of - * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC - * keys - * @NL80211_KEY_IDX: key ID (u8, 0-3) - * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 - * section 7.3.2.25.1, e.g. 0x000FAC04) - * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and - * CCMP keys, each six bytes in little endian - * @NL80211_KEY_DEFAULT: flag indicating default key - * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key - * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not - * specified the default depends on whether a MAC address was - * given with the command using the key or not (u32) - * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags - * attributes, specifying what a key should be set as default as. - * See &enum nl80211_key_default_types. - * @__NL80211_KEY_AFTER_LAST: internal - * @NL80211_KEY_MAX: highest key attribute - */ -enum nl80211_key_attributes { - __NL80211_KEY_INVALID, - NL80211_KEY_DATA, - NL80211_KEY_IDX, - NL80211_KEY_CIPHER, - NL80211_KEY_SEQ, - NL80211_KEY_DEFAULT, - NL80211_KEY_DEFAULT_MGMT, - NL80211_KEY_TYPE, - NL80211_KEY_DEFAULT_TYPES, - - /* keep last */ - __NL80211_KEY_AFTER_LAST, - NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 -}; - -/** - * enum nl80211_tx_rate_attributes - TX rate set attributes - * @__NL80211_TXRATE_INVALID: invalid - * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection - * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with - * 1 = 500 kbps) but without the IE length restriction (at most - * %NL80211_MAX_SUPP_RATES in a single array). - * @NL80211_TXRATE_MCS: HT (MCS) rates allowed for TX rate selection - * in an array of MCS numbers. - * @__NL80211_TXRATE_AFTER_LAST: internal - * @NL80211_TXRATE_MAX: highest TX rate attribute - */ -enum nl80211_tx_rate_attributes { - __NL80211_TXRATE_INVALID, - NL80211_TXRATE_LEGACY, - NL80211_TXRATE_MCS, - - /* keep last */ - __NL80211_TXRATE_AFTER_LAST, - NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 -}; - -/** - * enum nl80211_band - Frequency band - * @NL80211_BAND_2GHZ: 2.4 GHz ISM band - * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) - * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) - */ -enum nl80211_band { - NL80211_BAND_2GHZ, - NL80211_BAND_5GHZ, - NL80211_BAND_60GHZ, -}; - -/** - * enum nl80211_ps_state - powersave state - * @NL80211_PS_DISABLED: powersave is disabled - * @NL80211_PS_ENABLED: powersave is enabled - */ -enum nl80211_ps_state { - NL80211_PS_DISABLED, - NL80211_PS_ENABLED, -}; - -/** - * enum nl80211_attr_cqm - connection quality monitor attributes - * @__NL80211_ATTR_CQM_INVALID: invalid - * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies - * the threshold for the RSSI level at which an event will be sent. Zero - * to disable. - * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies - * the minimum amount the RSSI level must change after an event before a - * new event may be issued (to reduce effects of RSSI oscillation). - * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event - * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many - * consecutive packets were not acknowledged by the peer - * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures - * during the given %NL80211_ATTR_CQM_TXE_INTVL before an - * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and - * %NL80211_ATTR_CQM_TXE_PKTS is generated. - * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given - * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is - * checked. - * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic - * interval in which %NL80211_ATTR_CQM_TXE_PKTS and - * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an - * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. - * @__NL80211_ATTR_CQM_AFTER_LAST: internal - * @NL80211_ATTR_CQM_MAX: highest key attribute - */ -enum nl80211_attr_cqm { - __NL80211_ATTR_CQM_INVALID, - NL80211_ATTR_CQM_RSSI_THOLD, - NL80211_ATTR_CQM_RSSI_HYST, - NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, - NL80211_ATTR_CQM_PKT_LOSS_EVENT, - NL80211_ATTR_CQM_TXE_RATE, - NL80211_ATTR_CQM_TXE_PKTS, - NL80211_ATTR_CQM_TXE_INTVL, - - /* keep last */ - __NL80211_ATTR_CQM_AFTER_LAST, - NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 -}; - -/** - * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the - * configured threshold - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the - * configured threshold - * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. - * (Note that deauth/disassoc will still follow if the AP is not - * available. This event might get used as roaming event, etc.) - */ -enum nl80211_cqm_rssi_threshold_event { - NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, - NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, - NL80211_CQM_RSSI_BEACON_LOSS_EVENT, -}; - - -/** - * enum nl80211_tx_power_setting - TX power adjustment - * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power - * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter - * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter - */ -enum nl80211_tx_power_setting { - NL80211_TX_POWER_AUTOMATIC, - NL80211_TX_POWER_LIMITED, - NL80211_TX_POWER_FIXED, -}; - -/** - * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute - * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute - * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has - * a zero bit are ignored - * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have - * a bit for each byte in the pattern. The lowest-order bit corresponds - * to the first byte of the pattern, but the bytes of the pattern are - * in a little-endian-like format, i.e. the 9th byte of the pattern - * corresponds to the lowest-order bit in the second byte of the mask. - * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where - * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". - * Note that the pattern matching is done as though frames were not - * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked - * first (including SNAP header unpacking) and then matched. - * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes - * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number - */ -enum nl80211_wowlan_packet_pattern_attr { - __NL80211_WOWLAN_PKTPAT_INVALID, - NL80211_WOWLAN_PKTPAT_MASK, - NL80211_WOWLAN_PKTPAT_PATTERN, - - NUM_NL80211_WOWLAN_PKTPAT, - MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, -}; - -/** - * struct nl80211_wowlan_pattern_support - pattern support information - * @max_patterns: maximum number of patterns supported - * @min_pattern_len: minimum length of each pattern - * @max_pattern_len: maximum length of each pattern - * - * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when - * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the - * capability information given by the kernel to userspace. - */ -struct nl80211_wowlan_pattern_support { - __u32 max_patterns; - __u32 min_pattern_len; - __u32 max_pattern_len; -} __attribute__((packed)); - -/** - * enum nl80211_wowlan_triggers - WoWLAN trigger definitions - * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes - * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put - * the chip into a special state -- works best with chips that have - * support for low-power operation already (flag) - * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect - * is detected is implementation-specific (flag) - * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed - * by 16 repetitions of MAC addr, anywhere in payload) (flag) - * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns - * which are passed in an array of nested attributes, each nested attribute - * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. - * - * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute - * carrying a &struct nl80211_wowlan_pattern_support. - * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be - * used when setting, used only to indicate that GTK rekeying is supported - * by the device (flag) - * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if - * done by the device) (flag) - * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request - * packet (flag) - * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) - * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released - * (on devices that have rfkill in the device) (flag) - * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers - * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number - */ -enum nl80211_wowlan_triggers { - __NL80211_WOWLAN_TRIG_INVALID, - NL80211_WOWLAN_TRIG_ANY, - NL80211_WOWLAN_TRIG_DISCONNECT, - NL80211_WOWLAN_TRIG_MAGIC_PKT, - NL80211_WOWLAN_TRIG_PKT_PATTERN, - NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, - NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, - NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, - NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, - NL80211_WOWLAN_TRIG_RFKILL_RELEASE, - - /* keep last */ - NUM_NL80211_WOWLAN_TRIG, - MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 -}; - -/** - * enum nl80211_iface_limit_attrs - limit attributes - * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) - * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that - * can be chosen from this set of interface types (u32) - * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a - * flag attribute for each interface type in this set - * @NUM_NL80211_IFACE_LIMIT: number of attributes - * @MAX_NL80211_IFACE_LIMIT: highest attribute number - */ -enum nl80211_iface_limit_attrs { - NL80211_IFACE_LIMIT_UNSPEC, - NL80211_IFACE_LIMIT_MAX, - NL80211_IFACE_LIMIT_TYPES, - - /* keep last */ - NUM_NL80211_IFACE_LIMIT, - MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 -}; - -/** - * enum nl80211_if_combination_attrs -- interface combination attributes - * - * @NL80211_IFACE_COMB_UNSPEC: (reserved) - * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits - * for given interface types, see &enum nl80211_iface_limit_attrs. - * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of - * interfaces that can be created in this group. This number doesn't - * apply to interfaces purely managed in software, which are listed - * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. - * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that - * beacon intervals within this group must be all the same even for - * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt - * the infrastructure network's beacon interval. - * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many - * different channels may be used within this group. - * @NUM_NL80211_IFACE_COMB: number of attributes - * @MAX_NL80211_IFACE_COMB: highest attribute number - * - * Examples: - * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 - * => allows an AP and a STA that must match BIs - * - * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 - * => allows 8 of AP/GO - * - * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 - * => allows two STAs on different channels - * - * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 - * => allows a STA plus three P2P interfaces - * - * The list of these four possiblities could completely be contained - * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate - * that any of these groups must match. - * - * "Combinations" of just a single interface will not be listed here, - * a single interface of any valid interface type is assumed to always - * be possible by itself. This means that implicitly, for each valid - * interface type, the following group always exists: - * numbers = [ #{} <= 1 ], channels = 1, max = 1 - */ -enum nl80211_if_combination_attrs { - NL80211_IFACE_COMB_UNSPEC, - NL80211_IFACE_COMB_LIMITS, - NL80211_IFACE_COMB_MAXNUM, - NL80211_IFACE_COMB_STA_AP_BI_MATCH, - NL80211_IFACE_COMB_NUM_CHANNELS, - - /* keep last */ - NUM_NL80211_IFACE_COMB, - MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 -}; - - -/** - * enum nl80211_plink_state - state of a mesh peer link finite state machine - * - * @NL80211_PLINK_LISTEN: initial state, considered the implicit - * state of non existant mesh peer links - * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to - * this mesh peer - * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received - * from this mesh peer - * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been - * received from this mesh peer - * @NL80211_PLINK_ESTAB: mesh peer link is established - * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled - * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh - * plink are discarded - * @NUM_NL80211_PLINK_STATES: number of peer link states - * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states - */ -enum nl80211_plink_state { - NL80211_PLINK_LISTEN, - NL80211_PLINK_OPN_SNT, - NL80211_PLINK_OPN_RCVD, - NL80211_PLINK_CNF_RCVD, - NL80211_PLINK_ESTAB, - NL80211_PLINK_HOLDING, - NL80211_PLINK_BLOCKED, - - /* keep last */ - NUM_NL80211_PLINK_STATES, - MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 -}; - -#define NL80211_KCK_LEN 16 -#define NL80211_KEK_LEN 16 -#define NL80211_REPLAY_CTR_LEN 8 - -/** - * enum nl80211_rekey_data - attributes for GTK rekey offload - * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes - * @NL80211_REKEY_DATA_KEK: key encryption key (binary) - * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) - * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) - * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) - * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) - */ -enum nl80211_rekey_data { - __NL80211_REKEY_DATA_INVALID, - NL80211_REKEY_DATA_KEK, - NL80211_REKEY_DATA_KCK, - NL80211_REKEY_DATA_REPLAY_CTR, - - /* keep last */ - NUM_NL80211_REKEY_DATA, - MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 -}; - -/** - * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID - * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in - * Beacon frames) - * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element - * in Beacon frames - * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID - * element in Beacon frames but zero out each byte in the SSID - */ -enum nl80211_hidden_ssid { - NL80211_HIDDEN_SSID_NOT_IN_USE, - NL80211_HIDDEN_SSID_ZERO_LEN, - NL80211_HIDDEN_SSID_ZERO_CONTENTS -}; - -/** - * enum nl80211_sta_wme_attr - station WME attributes - * @__NL80211_STA_WME_INVALID: invalid number for nested attribute - * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format - * is the same as the AC bitmap in the QoS info field. - * @NL80211_STA_WME_MAX_SP: max service period. the format is the same - * as the MAX_SP field in the QoS info field (but already shifted down). - * @__NL80211_STA_WME_AFTER_LAST: internal - * @NL80211_STA_WME_MAX: highest station WME attribute - */ -enum nl80211_sta_wme_attr { - __NL80211_STA_WME_INVALID, - NL80211_STA_WME_UAPSD_QUEUES, - NL80211_STA_WME_MAX_SP, - - /* keep last */ - __NL80211_STA_WME_AFTER_LAST, - NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 -}; - -/** - * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates - * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes - * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher - * priority) - * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) - * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) - * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes - * (internal) - * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute - * (internal) - */ -enum nl80211_pmksa_candidate_attr { - __NL80211_PMKSA_CANDIDATE_INVALID, - NL80211_PMKSA_CANDIDATE_INDEX, - NL80211_PMKSA_CANDIDATE_BSSID, - NL80211_PMKSA_CANDIDATE_PREAUTH, - - /* keep last */ - NUM_NL80211_PMKSA_CANDIDATE, - MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 -}; - -/** - * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION - * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request - * @NL80211_TDLS_SETUP: Setup TDLS link - * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established - * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link - * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link - */ -enum nl80211_tdls_operation { - NL80211_TDLS_DISCOVERY_REQ, - NL80211_TDLS_SETUP, - NL80211_TDLS_TEARDOWN, - NL80211_TDLS_ENABLE_LINK, - NL80211_TDLS_DISABLE_LINK, -}; - -/* - * enum nl80211_ap_sme_features - device-integrated AP features - * Reserved for future use, no bits are defined in - * NL80211_ATTR_DEVICE_AP_SME yet. -enum nl80211_ap_sme_features { -}; - */ - -/** - * enum nl80211_feature_flags - device/driver features - * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back - * TX status to the socket error queue when requested with the - * socket option. - * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. - * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up - * the connected inactive stations in AP mode. - * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from - * cellular base stations. - * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active - * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel - * in the interface combinations, even when it's only used for scan - * and remain-on-channel. This could be due to, for example, the - * remain-on-channel implementation requiring a channel context. - */ -enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, - NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, - NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, - NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, -}; - -/** - * enum nl80211_probe_resp_offload_support_attr - optional supported - * protocols for probe-response offloading by the driver/FW. - * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. - * Each enum value represents a bit in the bitmap of supported - * protocols. Typically a subset of probe-requests belonging to a - * supported protocol will be excluded from offload and uploaded - * to the host. - * - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P - * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u - */ -enum nl80211_probe_resp_offload_support_attr { - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, -}; - -/** - * enum nl80211_connect_failed_reason - connection request failed reasons - * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be - * handled by the AP is reached. - * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. - */ -enum nl80211_connect_failed_reason { - NL80211_CONN_FAIL_MAX_CLIENTS, - NL80211_CONN_FAIL_BLOCKED_CLIENT, -}; - -#endif /* __LINUX_NL80211_H */ diff --git a/include/linux/nubus.h b/include/linux/nubus.h index e137b3c486a7..a8696bbdfbc4 100644 --- a/include/linux/nubus.h +++ b/include/linux/nubus.h @@ -8,236 +8,12 @@ Some of the constants in here are from the corresponding NetBSD/OpenBSD header file, by Allen Briggs. We figured out the rest of them on our own. */ - #ifndef LINUX_NUBUS_H #define LINUX_NUBUS_H -#include -#ifdef __KERNEL__ #include -#endif - -enum nubus_category { - NUBUS_CAT_BOARD = 0x0001, - NUBUS_CAT_DISPLAY = 0x0003, - NUBUS_CAT_NETWORK = 0x0004, - NUBUS_CAT_COMMUNICATIONS = 0x0006, - NUBUS_CAT_FONT = 0x0009, - NUBUS_CAT_CPU = 0x000A, - /* For lack of a better name */ - NUBUS_CAT_DUODOCK = 0x0020 -}; - -enum nubus_type_network { - NUBUS_TYPE_ETHERNET = 0x0001, - NUBUS_TYPE_RS232 = 0x0002 -}; - -enum nubus_type_display { - NUBUS_TYPE_VIDEO = 0x0001 -}; - -enum nubus_type_cpu { - NUBUS_TYPE_68020 = 0x0003, - NUBUS_TYPE_68030 = 0x0004, - NUBUS_TYPE_68040 = 0x0005 -}; - -/* Known tuples: (according to TattleTech and Slots) - * 68030 motherboards: <10,4,0,24> - * 68040 motherboards: <10,5,0,24> - * DuoDock Plus: <32,1,1,2> - * - * Toby Frame Buffer card: <3,1,1,1> - * RBV built-in video (IIci): <3,1,1,24> - * Valkyrie built-in video (Q630): <3,1,1,46> - * Macintosh Display Card: <3,1,1,25> - * Sonora built-in video (P460): <3,1,1,34> - * Jet framebuffer (DuoDock Plus): <3,1,1,41> - * - * SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272> - * SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271> - * Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281> - * Sonic Systems Ethernet A-Series Card: <4,1,268,256> - * Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision) - * ROM on the above card: <2,1,0,0> - * Cabletron ethernet card: <4,1,1,265> - * Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card) - * Kinetics EtherPort IIN: <4,1,259,262> - * API Engineering EtherRun_LCa PDS enet card: <4,1,282,256> - * - * Add your devices to the list! You can obtain the "Slots" utility - * from Apple's FTP site at: - * ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/ - * - * Alternately, TattleTech can be found at any Info-Mac mirror site. - * or from its distribution site: ftp://ftp.decismkr.com/dms - */ - -/* DrSW: Uniquely identifies the software interface to a board. This - is usually the one you want to look at when writing a driver. It's - not as useful as you think, though, because as we should know by - now (duh), "Apple Compatible" can mean a lot of things... */ - -/* Add known DrSW values here */ -enum nubus_drsw { - /* NUBUS_CAT_DISPLAY */ - NUBUS_DRSW_APPLE = 0x0001, - NUBUS_DRSW_APPLE_HIRES = 0x0013, /* MacII HiRes card driver */ - - /* NUBUS_CAT_NETWORK */ - NUBUS_DRSW_3COM = 0x0000, - NUBUS_DRSW_CABLETRON = 0x0001, - NUBUS_DRSW_SONIC_LC = 0x0001, - NUBUS_DRSW_KINETICS = 0x0103, - NUBUS_DRSW_ASANTE = 0x0104, - NUBUS_DRSW_TECHWORKS = 0x0109, - NUBUS_DRSW_DAYNA = 0x010b, - NUBUS_DRSW_FARALLON = 0x010c, - NUBUS_DRSW_APPLE_SN = 0x010f, - NUBUS_DRSW_DAYNA2 = 0x0115, - NUBUS_DRSW_FOCUS = 0x011a, - NUBUS_DRSW_ASANTE_CS = 0x011d, /* use asante SMC9194 driver */ - NUBUS_DRSW_DAYNA_LC = 0x011e, - - /* NUBUS_CAT_CPU */ - NUBUS_DRSW_NONE = 0x0000, -}; - -/* DrHW: Uniquely identifies the hardware interface to a board (or at - least, it should... some video cards are known to incorrectly - identify themselves as Toby cards) */ - -/* Add known DrHW values here */ -enum nubus_drhw { - /* NUBUS_CAT_DISPLAY */ - NUBUS_DRHW_APPLE_TFB = 0x0001, /* Toby frame buffer card */ - NUBUS_DRHW_APPLE_WVC = 0x0006, /* Apple Workstation Video Card */ - NUBUS_DRHW_SIGMA_CLRMAX = 0x0007, /* Sigma Design ColorMax */ - NUBUS_DRHW_APPLE_SE30 = 0x0009, /* Apple SE/30 video */ - NUBUS_DRHW_APPLE_HRVC = 0x0013, /* Mac II High-Res Video Card */ - NUBUS_DRHW_APPLE_PVC = 0x0017, /* Mac II Portrait Video Card */ - NUBUS_DRHW_APPLE_RBV1 = 0x0018, /* IIci RBV video */ - NUBUS_DRHW_APPLE_MDC = 0x0019, /* Macintosh Display Card */ - NUBUS_DRHW_APPLE_SONORA = 0x0022, /* Sonora built-in video */ - NUBUS_DRHW_APPLE_24AC = 0x002b, /* Mac 24AC Video Card */ - NUBUS_DRHW_APPLE_VALKYRIE = 0x002e, - NUBUS_DRHW_APPLE_JET = 0x0029, /* Jet framebuffer (DuoDock) */ - NUBUS_DRHW_SMAC_GFX = 0x0105, /* SuperMac GFX */ - NUBUS_DRHW_RASTER_CB264 = 0x013B, /* RasterOps ColorBoard 264 */ - NUBUS_DRHW_MICRON_XCEED = 0x0146, /* Micron Exceed color */ - NUBUS_DRHW_RDIUS_GSC = 0x0153, /* Radius GS/C */ - NUBUS_DRHW_SMAC_SPEC8 = 0x017B, /* SuperMac Spectrum/8 */ - NUBUS_DRHW_SMAC_SPEC24 = 0x017C, /* SuperMac Spectrum/24 */ - NUBUS_DRHW_RASTER_CB364 = 0x026F, /* RasterOps ColorBoard 364 */ - NUBUS_DRHW_RDIUS_DCGX = 0x027C, /* Radius DirectColor/GX */ - NUBUS_DRHW_RDIUS_PC8 = 0x0291, /* Radius PrecisionColor 8 */ - NUBUS_DRHW_LAPIS_PCS8 = 0x0292, /* Lapis ProColorServer 8 */ - NUBUS_DRHW_RASTER_24XLI = 0x02A0, /* RasterOps 8/24 XLi */ - NUBUS_DRHW_RASTER_PBPGT = 0x02A5, /* RasterOps PaintBoard Prism GT */ - NUBUS_DRHW_EMACH_FSX = 0x02AE, /* E-Machines Futura SX */ - NUBUS_DRHW_RASTER_24XLTV = 0x02B7, /* RasterOps 24XLTV */ - NUBUS_DRHW_SMAC_THUND24 = 0x02CB, /* SuperMac Thunder/24 */ - NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */ - NUBUS_DRHW_RDIUS_PC24XP = 0x0406, /* Radius PrecisionColor 24Xp */ - NUBUS_DRHW_RDIUS_PC24X = 0x040A, /* Radius PrecisionColor 24X */ - NUBUS_DRHW_RDIUS_PC8XJ = 0x040B, /* Radius PrecisionColor 8XJ */ - - /* NUBUS_CAT_NETWORK */ - NUBUS_DRHW_INTERLAN = 0x0100, - NUBUS_DRHW_SMC9194 = 0x0101, - NUBUS_DRHW_KINETICS = 0x0106, - NUBUS_DRHW_CABLETRON = 0x0109, - NUBUS_DRHW_ASANTE_LC = 0x010f, - NUBUS_DRHW_SONIC = 0x0110, - NUBUS_DRHW_TECHWORKS = 0x0112, - NUBUS_DRHW_APPLE_SONIC_NB = 0x0118, - NUBUS_DRHW_APPLE_SONIC_LC = 0x0119, - NUBUS_DRHW_FOCUS = 0x011c, - NUBUS_DRHW_SONNET = 0x011d, -}; +#include -/* Resource IDs: These are the identifiers for the various weird and - wonderful tidbits of information that may or may not reside in the - NuBus ROM directory. */ -enum nubus_res_id { - NUBUS_RESID_TYPE = 0x0001, - NUBUS_RESID_NAME = 0x0002, - NUBUS_RESID_ICON = 0x0003, - NUBUS_RESID_DRVRDIR = 0x0004, - NUBUS_RESID_LOADREC = 0x0005, - NUBUS_RESID_BOOTREC = 0x0006, - NUBUS_RESID_FLAGS = 0x0007, - NUBUS_RESID_HWDEVID = 0x0008, - NUBUS_RESID_MINOR_BASEOS = 0x000a, - NUBUS_RESID_MINOR_LENGTH = 0x000b, - NUBUS_RESID_MAJOR_BASEOS = 0x000c, - NUBUS_RESID_MAJOR_LENGTH = 0x000d, - NUBUS_RESID_CICN = 0x000f, - NUBUS_RESID_ICL8 = 0x0010, - NUBUS_RESID_ICL4 = 0x0011, -}; - -/* Category-specific resources. */ -enum nubus_board_res_id { - NUBUS_RESID_BOARDID = 0x0020, - NUBUS_RESID_PRAMINITDATA = 0x0021, - NUBUS_RESID_PRIMARYINIT = 0x0022, - NUBUS_RESID_TIMEOUTCONST = 0x0023, - NUBUS_RESID_VENDORINFO = 0x0024, - NUBUS_RESID_BOARDFLAGS = 0x0025, - NUBUS_RESID_SECONDINIT = 0x0026, - - /* Not sure why Apple put these next two in here */ - NUBUS_RESID_VIDNAMES = 0x0041, - NUBUS_RESID_VIDMODES = 0x007e -}; - -/* Fields within the vendor info directory */ -enum nubus_vendor_res_id { - NUBUS_RESID_VEND_ID = 0x0001, - NUBUS_RESID_VEND_SERIAL = 0x0002, - NUBUS_RESID_VEND_REV = 0x0003, - NUBUS_RESID_VEND_PART = 0x0004, - NUBUS_RESID_VEND_DATE = 0x0005 -}; - -enum nubus_net_res_id { - NUBUS_RESID_MAC_ADDRESS = 0x0080 -}; - -enum nubus_cpu_res_id { - NUBUS_RESID_MEMINFO = 0x0081, - NUBUS_RESID_ROMINFO = 0x0082 -}; - -enum nubus_display_res_id { - NUBUS_RESID_GAMMADIR = 0x0040, - NUBUS_RESID_FIRSTMODE = 0x0080, - NUBUS_RESID_SECONDMODE = 0x0081, - NUBUS_RESID_THIRDMODE = 0x0082, - NUBUS_RESID_FOURTHMODE = 0x0083, - NUBUS_RESID_FIFTHMODE = 0x0084, - NUBUS_RESID_SIXTHMODE = 0x0085 -}; - -struct nubus_dir -{ - unsigned char *base; - unsigned char *ptr; - int done; - int mask; -}; - -struct nubus_dirent -{ - unsigned char *base; - unsigned char type; - __u32 data; /* Actually 24bits used */ - int mask; -}; - -#ifdef __KERNEL__ struct nubus_board { struct nubus_board* next; struct nubus_dev* first_dev; @@ -352,12 +128,4 @@ void nubus_get_rsrc_mem(void* dest, void nubus_get_rsrc_str(void* dest, const struct nubus_dirent *dirent, int maxlen); -#endif /* __KERNEL__ */ - -/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */ -static inline void *nubus_slot_addr(int slot) -{ - return (void *)(0xF0000000|(slot<<24)); -} - #endif /* LINUX_NUBUS_H */ diff --git a/include/linux/nvram.h b/include/linux/nvram.h index 9189829c131c..cf0ff555a6ac 100644 --- a/include/linux/nvram.h +++ b/include/linux/nvram.h @@ -1,18 +1,8 @@ #ifndef _LINUX_NVRAM_H #define _LINUX_NVRAM_H -#include +#include -/* /dev/nvram ioctls */ -#define NVRAM_INIT _IO('p', 0x40) /* initialize NVRAM and set checksum */ -#define NVRAM_SETCKS _IO('p', 0x41) /* recalculate checksum */ - -/* for all current systems, this is where NVRAM starts */ -#define NVRAM_FIRST_BYTE 14 -/* all these functions expect an NVRAM offset, not an absolute */ -#define NVRAM_OFFSET(x) ((x)-NVRAM_FIRST_BYTE) - -#ifdef __KERNEL__ /* __foo is foo without grabbing the rtc_lock - get it yourself */ extern unsigned char __nvram_read_byte(int i); extern unsigned char nvram_read_byte(int i); @@ -20,6 +10,4 @@ extern void __nvram_write_byte(unsigned char c, int i); extern void nvram_write_byte(unsigned char c, int i); extern int __nvram_check_checksum(void); extern int nvram_check_checksum(void); -#endif - #endif /* _LINUX_NVRAM_H */ diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h deleted file mode 100644 index c090cf9249bb..000000000000 --- a/include/linux/omap3isp.h +++ /dev/null @@ -1,646 +0,0 @@ -/* - * omap3isp.h - * - * TI OMAP3 ISP - User-space API - * - * Copyright (C) 2010 Nokia Corporation - * Copyright (C) 2009 Texas Instruments, Inc. - * - * Contacts: Laurent Pinchart - * Sakari Ailus - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef OMAP3_ISP_USER_H -#define OMAP3_ISP_USER_H - -#include -#include - -/* - * Private IOCTLs - * - * VIDIOC_OMAP3ISP_CCDC_CFG: Set CCDC configuration - * VIDIOC_OMAP3ISP_PRV_CFG: Set preview engine configuration - * VIDIOC_OMAP3ISP_AEWB_CFG: Set AEWB module configuration - * VIDIOC_OMAP3ISP_HIST_CFG: Set histogram module configuration - * VIDIOC_OMAP3ISP_AF_CFG: Set auto-focus module configuration - * VIDIOC_OMAP3ISP_STAT_REQ: Read statistics (AEWB/AF/histogram) data - * VIDIOC_OMAP3ISP_STAT_EN: Enable/disable a statistics module - */ - -#define VIDIOC_OMAP3ISP_CCDC_CFG \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct omap3isp_ccdc_update_config) -#define VIDIOC_OMAP3ISP_PRV_CFG \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct omap3isp_prev_update_config) -#define VIDIOC_OMAP3ISP_AEWB_CFG \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 3, struct omap3isp_h3a_aewb_config) -#define VIDIOC_OMAP3ISP_HIST_CFG \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct omap3isp_hist_config) -#define VIDIOC_OMAP3ISP_AF_CFG \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct omap3isp_h3a_af_config) -#define VIDIOC_OMAP3ISP_STAT_REQ \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct omap3isp_stat_data) -#define VIDIOC_OMAP3ISP_STAT_EN \ - _IOWR('V', BASE_VIDIOC_PRIVATE + 7, unsigned long) - -/* - * Events - * - * V4L2_EVENT_OMAP3ISP_AEWB: AEWB statistics data ready - * V4L2_EVENT_OMAP3ISP_AF: AF statistics data ready - * V4L2_EVENT_OMAP3ISP_HIST: Histogram statistics data ready - */ - -#define V4L2_EVENT_OMAP3ISP_CLASS (V4L2_EVENT_PRIVATE_START | 0x100) -#define V4L2_EVENT_OMAP3ISP_AEWB (V4L2_EVENT_OMAP3ISP_CLASS | 0x1) -#define V4L2_EVENT_OMAP3ISP_AF (V4L2_EVENT_OMAP3ISP_CLASS | 0x2) -#define V4L2_EVENT_OMAP3ISP_HIST (V4L2_EVENT_OMAP3ISP_CLASS | 0x3) - -struct omap3isp_stat_event_status { - __u32 frame_number; - __u16 config_counter; - __u8 buf_err; -}; - -/* AE/AWB related structures and flags*/ - -/* H3A Range Constants */ -#define OMAP3ISP_AEWB_MAX_SATURATION_LIM 1023 -#define OMAP3ISP_AEWB_MIN_WIN_H 2 -#define OMAP3ISP_AEWB_MAX_WIN_H 256 -#define OMAP3ISP_AEWB_MIN_WIN_W 6 -#define OMAP3ISP_AEWB_MAX_WIN_W 256 -#define OMAP3ISP_AEWB_MIN_WINVC 1 -#define OMAP3ISP_AEWB_MIN_WINHC 1 -#define OMAP3ISP_AEWB_MAX_WINVC 128 -#define OMAP3ISP_AEWB_MAX_WINHC 36 -#define OMAP3ISP_AEWB_MAX_WINSTART 4095 -#define OMAP3ISP_AEWB_MIN_SUB_INC 2 -#define OMAP3ISP_AEWB_MAX_SUB_INC 32 -#define OMAP3ISP_AEWB_MAX_BUF_SIZE 83600 - -#define OMAP3ISP_AF_IIRSH_MIN 0 -#define OMAP3ISP_AF_IIRSH_MAX 4095 -#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MIN 1 -#define OMAP3ISP_AF_PAXEL_HORIZONTAL_COUNT_MAX 36 -#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN 1 -#define OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MAX 128 -#define OMAP3ISP_AF_PAXEL_INCREMENT_MIN 2 -#define OMAP3ISP_AF_PAXEL_INCREMENT_MAX 32 -#define OMAP3ISP_AF_PAXEL_HEIGHT_MIN 2 -#define OMAP3ISP_AF_PAXEL_HEIGHT_MAX 256 -#define OMAP3ISP_AF_PAXEL_WIDTH_MIN 16 -#define OMAP3ISP_AF_PAXEL_WIDTH_MAX 256 -#define OMAP3ISP_AF_PAXEL_HZSTART_MIN 1 -#define OMAP3ISP_AF_PAXEL_HZSTART_MAX 4095 -#define OMAP3ISP_AF_PAXEL_VTSTART_MIN 0 -#define OMAP3ISP_AF_PAXEL_VTSTART_MAX 4095 -#define OMAP3ISP_AF_THRESHOLD_MAX 255 -#define OMAP3ISP_AF_COEF_MAX 4095 -#define OMAP3ISP_AF_PAXEL_SIZE 48 -#define OMAP3ISP_AF_MAX_BUF_SIZE 221184 - -/** - * struct omap3isp_h3a_aewb_config - AE AWB configuration reset values - * saturation_limit: Saturation limit. - * @win_height: Window Height. Range 2 - 256, even values only. - * @win_width: Window Width. Range 6 - 256, even values only. - * @ver_win_count: Vertical Window Count. Range 1 - 128. - * @hor_win_count: Horizontal Window Count. Range 1 - 36. - * @ver_win_start: Vertical Window Start. Range 0 - 4095. - * @hor_win_start: Horizontal Window Start. Range 0 - 4095. - * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095. - * @blk_win_height: Black Window Height. Range 2 - 256, even values only. - * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even - * values only. - * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even - * values only. - * @alaw_enable: AEW ALAW EN flag. - */ -struct omap3isp_h3a_aewb_config { - /* - * Common fields. - * They should be the first ones and must be in the same order as in - * ispstat_generic_config struct. - */ - __u32 buf_size; - __u16 config_counter; - - /* Private fields */ - __u16 saturation_limit; - __u16 win_height; - __u16 win_width; - __u16 ver_win_count; - __u16 hor_win_count; - __u16 ver_win_start; - __u16 hor_win_start; - __u16 blk_ver_win_start; - __u16 blk_win_height; - __u16 subsample_ver_inc; - __u16 subsample_hor_inc; - __u8 alaw_enable; -}; - -/** - * struct omap3isp_stat_data - Statistic data sent to or received from user - * @ts: Timestamp of returned framestats. - * @buf: Pointer to pass to user. - * @frame_number: Frame number of requested stats. - * @cur_frame: Current frame number being processed. - * @config_counter: Number of the configuration associated with the data. - */ -struct omap3isp_stat_data { - struct timeval ts; - void __user *buf; - __u32 buf_size; - __u16 frame_number; - __u16 cur_frame; - __u16 config_counter; -}; - - -/* Histogram related structs */ - -/* Flags for number of bins */ -#define OMAP3ISP_HIST_BINS_32 0 -#define OMAP3ISP_HIST_BINS_64 1 -#define OMAP3ISP_HIST_BINS_128 2 -#define OMAP3ISP_HIST_BINS_256 3 - -/* Number of bins * 4 colors * 4-bytes word */ -#define OMAP3ISP_HIST_MEM_SIZE_BINS(n) ((1 << ((n)+5))*4*4) - -#define OMAP3ISP_HIST_MEM_SIZE 1024 -#define OMAP3ISP_HIST_MIN_REGIONS 1 -#define OMAP3ISP_HIST_MAX_REGIONS 4 -#define OMAP3ISP_HIST_MAX_WB_GAIN 255 -#define OMAP3ISP_HIST_MIN_WB_GAIN 0 -#define OMAP3ISP_HIST_MAX_BIT_WIDTH 14 -#define OMAP3ISP_HIST_MIN_BIT_WIDTH 8 -#define OMAP3ISP_HIST_MAX_WG 4 -#define OMAP3ISP_HIST_MAX_BUF_SIZE 4096 - -/* Source */ -#define OMAP3ISP_HIST_SOURCE_CCDC 0 -#define OMAP3ISP_HIST_SOURCE_MEM 1 - -/* CFA pattern */ -#define OMAP3ISP_HIST_CFA_BAYER 0 -#define OMAP3ISP_HIST_CFA_FOVEONX3 1 - -struct omap3isp_hist_region { - __u16 h_start; - __u16 h_end; - __u16 v_start; - __u16 v_end; -}; - -struct omap3isp_hist_config { - /* - * Common fields. - * They should be the first ones and must be in the same order as in - * ispstat_generic_config struct. - */ - __u32 buf_size; - __u16 config_counter; - - __u8 num_acc_frames; /* Num of image frames to be processed and - accumulated for each histogram frame */ - __u16 hist_bins; /* number of bins: 32, 64, 128, or 256 */ - __u8 cfa; /* BAYER or FOVEON X3 */ - __u8 wg[OMAP3ISP_HIST_MAX_WG]; /* White Balance Gain */ - __u8 num_regions; /* number of regions to be configured */ - struct omap3isp_hist_region region[OMAP3ISP_HIST_MAX_REGIONS]; -}; - -/* Auto Focus related structs */ - -#define OMAP3ISP_AF_NUM_COEF 11 - -enum omap3isp_h3a_af_fvmode { - OMAP3ISP_AF_MODE_SUMMED = 0, - OMAP3ISP_AF_MODE_PEAK = 1 -}; - -/* Red, Green, and blue pixel location in the AF windows */ -enum omap3isp_h3a_af_rgbpos { - OMAP3ISP_AF_GR_GB_BAYER = 0, /* GR and GB as Bayer pattern */ - OMAP3ISP_AF_RG_GB_BAYER = 1, /* RG and GB as Bayer pattern */ - OMAP3ISP_AF_GR_BG_BAYER = 2, /* GR and BG as Bayer pattern */ - OMAP3ISP_AF_RG_BG_BAYER = 3, /* RG and BG as Bayer pattern */ - OMAP3ISP_AF_GG_RB_CUSTOM = 4, /* GG and RB as custom pattern */ - OMAP3ISP_AF_RB_GG_CUSTOM = 5 /* RB and GG as custom pattern */ -}; - -/* Contains the information regarding the Horizontal Median Filter */ -struct omap3isp_h3a_af_hmf { - __u8 enable; /* Status of Horizontal Median Filter */ - __u8 threshold; /* Threshold Value for Horizontal Median Filter */ -}; - -/* Contains the information regarding the IIR Filters */ -struct omap3isp_h3a_af_iir { - __u16 h_start; /* IIR horizontal start */ - __u16 coeff_set0[OMAP3ISP_AF_NUM_COEF]; /* Filter coefficient, set 0 */ - __u16 coeff_set1[OMAP3ISP_AF_NUM_COEF]; /* Filter coefficient, set 1 */ -}; - -/* Contains the information regarding the Paxels Structure in AF Engine */ -struct omap3isp_h3a_af_paxel { - __u16 h_start; /* Horizontal Start Position */ - __u16 v_start; /* Vertical Start Position */ - __u8 width; /* Width of the Paxel */ - __u8 height; /* Height of the Paxel */ - __u8 h_cnt; /* Horizontal Count */ - __u8 v_cnt; /* vertical Count */ - __u8 line_inc; /* Line Increment */ -}; - -/* Contains the parameters required for hardware set up of AF Engine */ -struct omap3isp_h3a_af_config { - /* - * Common fields. - * They should be the first ones and must be in the same order as in - * ispstat_generic_config struct. - */ - __u32 buf_size; - __u16 config_counter; - - struct omap3isp_h3a_af_hmf hmf; /* HMF configurations */ - struct omap3isp_h3a_af_iir iir; /* IIR filter configurations */ - struct omap3isp_h3a_af_paxel paxel; /* Paxel parameters */ - enum omap3isp_h3a_af_rgbpos rgb_pos; /* RGB Positions */ - enum omap3isp_h3a_af_fvmode fvmode; /* Accumulator mode */ - __u8 alaw_enable; /* AF ALAW status */ -}; - -/* ISP CCDC structs */ - -/* Abstraction layer CCDC configurations */ -#define OMAP3ISP_CCDC_ALAW (1 << 0) -#define OMAP3ISP_CCDC_LPF (1 << 1) -#define OMAP3ISP_CCDC_BLCLAMP (1 << 2) -#define OMAP3ISP_CCDC_BCOMP (1 << 3) -#define OMAP3ISP_CCDC_FPC (1 << 4) -#define OMAP3ISP_CCDC_CULL (1 << 5) -#define OMAP3ISP_CCDC_CONFIG_LSC (1 << 7) -#define OMAP3ISP_CCDC_TBL_LSC (1 << 8) - -#define OMAP3ISP_RGB_MAX 3 - -/* Enumeration constants for Alaw input width */ -enum omap3isp_alaw_ipwidth { - OMAP3ISP_ALAW_BIT12_3 = 0x3, - OMAP3ISP_ALAW_BIT11_2 = 0x4, - OMAP3ISP_ALAW_BIT10_1 = 0x5, - OMAP3ISP_ALAW_BIT9_0 = 0x6 -}; - -/** - * struct omap3isp_ccdc_lsc_config - LSC configuration - * @offset: Table Offset of the gain table. - * @gain_mode_n: Vertical dimension of a paxel in LSC configuration. - * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration. - * @gain_format: Gain table format. - * @fmtsph: Start pixel horizontal from start of the HS sync pulse. - * @fmtlnh: Number of pixels in horizontal direction to use for the data - * reformatter. - * @fmtslv: Start line from start of VS sync pulse for the data reformatter. - * @fmtlnv: Number of lines in vertical direction for the data reformatter. - * @initial_x: X position, in pixels, of the first active pixel in reference - * to the first active paxel. Must be an even number. - * @initial_y: Y position, in pixels, of the first active pixel in reference - * to the first active paxel. Must be an even number. - * @size: Size of LSC gain table. Filled when loaded from userspace. - */ -struct omap3isp_ccdc_lsc_config { - __u16 offset; - __u8 gain_mode_n; - __u8 gain_mode_m; - __u8 gain_format; - __u16 fmtsph; - __u16 fmtlnh; - __u16 fmtslv; - __u16 fmtlnv; - __u8 initial_x; - __u8 initial_y; - __u32 size; -}; - -/** - * struct omap3isp_ccdc_bclamp - Optical & Digital black clamp subtract - * @obgain: Optical black average gain. - * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample. - * @oblines: Optical Black Sample lines. - * @oblen: Optical Black Sample Length. - * @dcsubval: Digital Black Clamp subtract value. - */ -struct omap3isp_ccdc_bclamp { - __u8 obgain; - __u8 obstpixel; - __u8 oblines; - __u8 oblen; - __u16 dcsubval; -}; - -/** - * struct omap3isp_ccdc_fpc - Faulty Pixels Correction - * @fpnum: Number of faulty pixels to be corrected in the frame. - * @fpcaddr: Memory address of the FPC Table - */ -struct omap3isp_ccdc_fpc { - __u16 fpnum; - __u32 fpcaddr; -}; - -/** - * struct omap3isp_ccdc_blcomp - Black Level Compensation parameters - * @b_mg: B/Mg pixels. 2's complement. -128 to +127. - * @gb_g: Gb/G pixels. 2's complement. -128 to +127. - * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127. - * @r_ye: R/Ye pixels. 2's complement. -128 to +127. - */ -struct omap3isp_ccdc_blcomp { - __u8 b_mg; - __u8 gb_g; - __u8 gr_cy; - __u8 r_ye; -}; - -/** - * omap3isp_ccdc_culling - Culling parameters - * @v_pattern: Vertical culling pattern. - * @h_odd: Horizontal Culling pattern for odd lines. - * @h_even: Horizontal Culling pattern for even lines. - */ -struct omap3isp_ccdc_culling { - __u8 v_pattern; - __u16 h_odd; - __u16 h_even; -}; - -/** - * omap3isp_ccdc_update_config - CCDC configuration - * @update: Specifies which CCDC registers should be updated. - * @flag: Specifies which CCDC functions should be enabled. - * @alawip: Enable/Disable A-Law compression. - * @bclamp: Black clamp control register. - * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement. - * @fpc: Number of faulty pixels corrected in the frame, address of FPC table. - * @cull: Cull control register. - * @lsc: Pointer to LSC gain table. - */ -struct omap3isp_ccdc_update_config { - __u16 update; - __u16 flag; - enum omap3isp_alaw_ipwidth alawip; - struct omap3isp_ccdc_bclamp __user *bclamp; - struct omap3isp_ccdc_blcomp __user *blcomp; - struct omap3isp_ccdc_fpc __user *fpc; - struct omap3isp_ccdc_lsc_config __user *lsc_cfg; - struct omap3isp_ccdc_culling __user *cull; - __u8 __user *lsc; -}; - -/* Preview configurations */ -#define OMAP3ISP_PREV_LUMAENH (1 << 0) -#define OMAP3ISP_PREV_INVALAW (1 << 1) -#define OMAP3ISP_PREV_HRZ_MED (1 << 2) -#define OMAP3ISP_PREV_CFA (1 << 3) -#define OMAP3ISP_PREV_CHROMA_SUPP (1 << 4) -#define OMAP3ISP_PREV_WB (1 << 5) -#define OMAP3ISP_PREV_BLKADJ (1 << 6) -#define OMAP3ISP_PREV_RGB2RGB (1 << 7) -#define OMAP3ISP_PREV_COLOR_CONV (1 << 8) -#define OMAP3ISP_PREV_YC_LIMIT (1 << 9) -#define OMAP3ISP_PREV_DEFECT_COR (1 << 10) -/* Bit 11 was OMAP3ISP_PREV_GAMMABYPASS, now merged with OMAP3ISP_PREV_GAMMA */ -#define OMAP3ISP_PREV_DRK_FRM_CAPTURE (1 << 12) -#define OMAP3ISP_PREV_DRK_FRM_SUBTRACT (1 << 13) -#define OMAP3ISP_PREV_LENS_SHADING (1 << 14) -#define OMAP3ISP_PREV_NF (1 << 15) -#define OMAP3ISP_PREV_GAMMA (1 << 16) - -#define OMAP3ISP_PREV_NF_TBL_SIZE 64 -#define OMAP3ISP_PREV_CFA_TBL_SIZE 576 -#define OMAP3ISP_PREV_CFA_BLK_SIZE (OMAP3ISP_PREV_CFA_TBL_SIZE / 4) -#define OMAP3ISP_PREV_GAMMA_TBL_SIZE 1024 -#define OMAP3ISP_PREV_YENH_TBL_SIZE 128 - -#define OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS 4 - -/** - * struct omap3isp_prev_hmed - Horizontal Median Filter - * @odddist: Distance between consecutive pixels of same color in the odd line. - * @evendist: Distance between consecutive pixels of same color in the even - * line. - * @thres: Horizontal median filter threshold. - */ -struct omap3isp_prev_hmed { - __u8 odddist; - __u8 evendist; - __u8 thres; -}; - -/* - * Enumeration for CFA Formats supported by preview - */ -enum omap3isp_cfa_fmt { - OMAP3ISP_CFAFMT_BAYER, - OMAP3ISP_CFAFMT_SONYVGA, - OMAP3ISP_CFAFMT_RGBFOVEON, - OMAP3ISP_CFAFMT_DNSPL, - OMAP3ISP_CFAFMT_HONEYCOMB, - OMAP3ISP_CFAFMT_RRGGBBFOVEON -}; - -/** - * struct omap3isp_prev_cfa - CFA Interpolation - * @format: CFA Format Enum value supported by preview. - * @gradthrs_vert: CFA Gradient Threshold - Vertical. - * @gradthrs_horz: CFA Gradient Threshold - Horizontal. - * @table: Pointer to the CFA table. - */ -struct omap3isp_prev_cfa { - enum omap3isp_cfa_fmt format; - __u8 gradthrs_vert; - __u8 gradthrs_horz; - __u32 table[4][OMAP3ISP_PREV_CFA_BLK_SIZE]; -}; - -/** - * struct omap3isp_prev_csup - Chrominance Suppression - * @gain: Gain. - * @thres: Threshold. - * @hypf_en: Flag to enable/disable the High Pass Filter. - */ -struct omap3isp_prev_csup { - __u8 gain; - __u8 thres; - __u8 hypf_en; -}; - -/** - * struct omap3isp_prev_wbal - White Balance - * @dgain: Digital gain (U10Q8). - * @coef3: White balance gain - COEF 3 (U8Q5). - * @coef2: White balance gain - COEF 2 (U8Q5). - * @coef1: White balance gain - COEF 1 (U8Q5). - * @coef0: White balance gain - COEF 0 (U8Q5). - */ -struct omap3isp_prev_wbal { - __u16 dgain; - __u8 coef3; - __u8 coef2; - __u8 coef1; - __u8 coef0; -}; - -/** - * struct omap3isp_prev_blkadj - Black Level Adjustment - * @red: Black level offset adjustment for Red in 2's complement format - * @green: Black level offset adjustment for Green in 2's complement format - * @blue: Black level offset adjustment for Blue in 2's complement format - */ -struct omap3isp_prev_blkadj { - /*Black level offset adjustment for Red in 2's complement format */ - __u8 red; - /*Black level offset adjustment for Green in 2's complement format */ - __u8 green; - /* Black level offset adjustment for Blue in 2's complement format */ - __u8 blue; -}; - -/** - * struct omap3isp_prev_rgbtorgb - RGB to RGB Blending - * @matrix: Blending values(S12Q8 format) - * [RR] [GR] [BR] - * [RG] [GG] [BG] - * [RB] [GB] [BB] - * @offset: Blending offset value for R,G,B in 2's complement integer format. - */ -struct omap3isp_prev_rgbtorgb { - __u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX]; - __u16 offset[OMAP3ISP_RGB_MAX]; -}; - -/** - * struct omap3isp_prev_csc - Color Space Conversion from RGB-YCbYCr - * @matrix: Color space conversion coefficients(S10Q8) - * [CSCRY] [CSCGY] [CSCBY] - * [CSCRCB] [CSCGCB] [CSCBCB] - * [CSCRCR] [CSCGCR] [CSCBCR] - * @offset: CSC offset values for Y offset, CB offset and CR offset respectively - */ -struct omap3isp_prev_csc { - __u16 matrix[OMAP3ISP_RGB_MAX][OMAP3ISP_RGB_MAX]; - __s16 offset[OMAP3ISP_RGB_MAX]; -}; - -/** - * struct omap3isp_prev_yclimit - Y, C Value Limit - * @minC: Minimum C value - * @maxC: Maximum C value - * @minY: Minimum Y value - * @maxY: Maximum Y value - */ -struct omap3isp_prev_yclimit { - __u8 minC; - __u8 maxC; - __u8 minY; - __u8 maxY; -}; - -/** - * struct omap3isp_prev_dcor - Defect correction - * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF - * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct - */ -struct omap3isp_prev_dcor { - __u8 couplet_mode_en; - __u32 detect_correct[OMAP3ISP_PREV_DETECT_CORRECT_CHANNELS]; -}; - -/** - * struct omap3isp_prev_nf - Noise Filter - * @spread: Spread value to be used in Noise Filter - * @table: Pointer to the Noise Filter table - */ -struct omap3isp_prev_nf { - __u8 spread; - __u32 table[OMAP3ISP_PREV_NF_TBL_SIZE]; -}; - -/** - * struct omap3isp_prev_gtables - Gamma correction tables - * @red: Array for red gamma table. - * @green: Array for green gamma table. - * @blue: Array for blue gamma table. - */ -struct omap3isp_prev_gtables { - __u32 red[OMAP3ISP_PREV_GAMMA_TBL_SIZE]; - __u32 green[OMAP3ISP_PREV_GAMMA_TBL_SIZE]; - __u32 blue[OMAP3ISP_PREV_GAMMA_TBL_SIZE]; -}; - -/** - * struct omap3isp_prev_luma - Luma enhancement - * @table: Array for luma enhancement table. - */ -struct omap3isp_prev_luma { - __u32 table[OMAP3ISP_PREV_YENH_TBL_SIZE]; -}; - -/** - * struct omap3isp_prev_update_config - Preview engine configuration (user) - * @update: Specifies which ISP Preview registers should be updated. - * @flag: Specifies which ISP Preview functions should be enabled. - * @shading_shift: 3bit value of shift used in shading compensation. - * @luma: Pointer to luma enhancement structure. - * @hmed: Pointer to structure containing the odd and even distance. - * between the pixels in the image along with the filter threshold. - * @cfa: Pointer to structure containing the CFA interpolation table, CFA. - * format in the image, vertical and horizontal gradient threshold. - * @csup: Pointer to Structure for Chrominance Suppression coefficients. - * @wbal: Pointer to structure for White Balance. - * @blkadj: Pointer to structure for Black Adjustment. - * @rgb2rgb: Pointer to structure for RGB to RGB Blending. - * @csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr. - * @yclimit: Pointer to structure for Y, C Value Limit. - * @dcor: Pointer to structure for defect correction. - * @nf: Pointer to structure for Noise Filter - * @gamma: Pointer to gamma structure. - */ -struct omap3isp_prev_update_config { - __u32 update; - __u32 flag; - __u32 shading_shift; - struct omap3isp_prev_luma __user *luma; - struct omap3isp_prev_hmed __user *hmed; - struct omap3isp_prev_cfa __user *cfa; - struct omap3isp_prev_csup __user *csup; - struct omap3isp_prev_wbal __user *wbal; - struct omap3isp_prev_blkadj __user *blkadj; - struct omap3isp_prev_rgbtorgb __user *rgb2rgb; - struct omap3isp_prev_csc __user *csc; - struct omap3isp_prev_yclimit __user *yclimit; - struct omap3isp_prev_dcor __user *dcor; - struct omap3isp_prev_nf __user *nf; - struct omap3isp_prev_gtables __user *gamma; -}; - -#endif /* OMAP3_ISP_USER_H */ diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 85af8184691a..d1f4dccaeede 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -20,205 +20,11 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - #ifndef __LINUX_OMAPFB_H__ #define __LINUX_OMAPFB_H__ -#include -#include -#include - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) -#define OMAPFB_WAITFORVSYNC OMAP_IO(57) -#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) -#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode) -#define OMAPFB_WAITFORGO OMAP_IO(60) -#define OMAPFB_GET_VRAM_INFO OMAP_IOR(61, struct omapfb_vram_info) -#define OMAPFB_SET_TEARSYNC OMAP_IOW(62, struct omapfb_tearsync_info) -#define OMAPFB_GET_DISPLAY_INFO OMAP_IOR(63, struct omapfb_display_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -#define OMAPFB_MEM_IDX_ENABLED 0x80 -#define OMAPFB_MEM_IDX_MASK 0x7f - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, - - OMAPFB_COLOR_ARGB16, - OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ - OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ - OMAPFB_COLOR_ARGB32, - OMAPFB_COLOR_RGBA32, - OMAPFB_COLOR_RGBX32, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; +#include -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 mem_idx; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -struct omapfb_memory_read { - __u16 x; - __u16 y; - __u16 w; - __u16 h; - size_t buffer_size; - void __user *buffer; -}; - -struct omapfb_ovl_colormode { - __u8 overlay_idx; - __u8 mode_idx; - __u32 bits_per_pixel; - __u32 nonstd; - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; -}; - -struct omapfb_vram_info { - __u32 total; - __u32 free; - __u32 largest_free_block; - __u32 reserved[5]; -}; - -struct omapfb_tearsync_info { - __u8 enabled; - __u8 reserved1[3]; - __u16 line; - __u16 reserved2; -}; - -struct omapfb_display_info { - __u16 xres; - __u16 yres; - __u32 width; /* phys width of the display in micrometers */ - __u32 height; /* phys height of the display in micrometers */ - __u32 reserved[5]; -}; - -#ifdef __KERNEL__ struct omap_lcd_config { char panel_name[16]; @@ -233,6 +39,4 @@ struct omapfb_platform_data { void __init omapfb_set_lcd_config(const struct omap_lcd_config *config); -#endif - #endif /* __OMAPFB_H */ diff --git a/include/linux/oom.h b/include/linux/oom.h index d36a8221f58b..fb9826847b89 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -1,18 +1,11 @@ #ifndef __INCLUDE_LINUX_OOM_H #define __INCLUDE_LINUX_OOM_H -/* - * /proc//oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for - * pid. - */ -#define OOM_SCORE_ADJ_MIN (-1000) -#define OOM_SCORE_ADJ_MAX 1000 - -#ifdef __KERNEL__ #include #include #include +#include struct zonelist; struct notifier_block; @@ -82,5 +75,4 @@ extern struct task_struct *find_lock_task_mm(struct task_struct *p); extern int sysctl_oom_dump_tasks; extern int sysctl_oom_kill_allocating_task; extern int sysctl_panic_on_oom; -#endif /* __KERNEL__*/ #endif /* _INCLUDE_LINUX_OOM_H */ diff --git a/include/linux/packet_diag.h b/include/linux/packet_diag.h deleted file mode 100644 index 93f5fa94a431..000000000000 --- a/include/linux/packet_diag.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef __PACKET_DIAG_H__ -#define __PACKET_DIAG_H__ - -#include - -struct packet_diag_req { - __u8 sdiag_family; - __u8 sdiag_protocol; - __u16 pad; - __u32 pdiag_ino; - __u32 pdiag_show; - __u32 pdiag_cookie[2]; -}; - -#define PACKET_SHOW_INFO 0x00000001 /* Basic packet_sk information */ -#define PACKET_SHOW_MCLIST 0x00000002 /* A set of packet_diag_mclist-s */ -#define PACKET_SHOW_RING_CFG 0x00000004 /* Rings configuration parameters */ -#define PACKET_SHOW_FANOUT 0x00000008 - -struct packet_diag_msg { - __u8 pdiag_family; - __u8 pdiag_type; - __u16 pdiag_num; - - __u32 pdiag_ino; - __u32 pdiag_cookie[2]; -}; - -enum { - PACKET_DIAG_INFO, - PACKET_DIAG_MCLIST, - PACKET_DIAG_RX_RING, - PACKET_DIAG_TX_RING, - PACKET_DIAG_FANOUT, - - PACKET_DIAG_MAX, -}; - -struct packet_diag_info { - __u32 pdi_index; - __u32 pdi_version; - __u32 pdi_reserve; - __u32 pdi_copy_thresh; - __u32 pdi_tstamp; - __u32 pdi_flags; - -#define PDI_RUNNING 0x1 -#define PDI_AUXDATA 0x2 -#define PDI_ORIGDEV 0x4 -#define PDI_VNETHDR 0x8 -#define PDI_LOSS 0x10 -}; - -struct packet_diag_mclist { - __u32 pdmc_index; - __u32 pdmc_count; - __u16 pdmc_type; - __u16 pdmc_alen; - __u8 pdmc_addr[MAX_ADDR_LEN]; -}; - -struct packet_diag_ring { - __u32 pdr_block_size; - __u32 pdr_block_nr; - __u32 pdr_frame_size; - __u32 pdr_frame_nr; - __u32 pdr_retire_tmo; - __u32 pdr_sizeof_priv; - __u32 pdr_features; -}; - -#endif diff --git a/include/linux/param.h b/include/linux/param.h deleted file mode 100644 index 092e92f67b50..000000000000 --- a/include/linux/param.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _LINUX_PARAM_H -#define _LINUX_PARAM_H - -#include - -#endif diff --git a/include/linux/parport.h b/include/linux/parport.h index 106c2ca9440b..c22f12547324 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -3,96 +3,9 @@ * the GNU Free Documentation License, Version 1.1 or any later version * published by the Free Software Foundation. */ - #ifndef _PARPORT_H_ #define _PARPORT_H_ -/* Start off with user-visible constants */ - -/* Maximum of 16 ports per machine */ -#define PARPORT_MAX 16 - -/* Magic numbers */ -#define PARPORT_IRQ_NONE -1 -#define PARPORT_DMA_NONE -1 -#define PARPORT_IRQ_AUTO -2 -#define PARPORT_DMA_AUTO -2 -#define PARPORT_DMA_NOFIFO -3 -#define PARPORT_DISABLE -2 -#define PARPORT_IRQ_PROBEONLY -3 -#define PARPORT_IOHI_AUTO -1 - -#define PARPORT_CONTROL_STROBE 0x1 -#define PARPORT_CONTROL_AUTOFD 0x2 -#define PARPORT_CONTROL_INIT 0x4 -#define PARPORT_CONTROL_SELECT 0x8 - -#define PARPORT_STATUS_ERROR 0x8 -#define PARPORT_STATUS_SELECT 0x10 -#define PARPORT_STATUS_PAPEROUT 0x20 -#define PARPORT_STATUS_ACK 0x40 -#define PARPORT_STATUS_BUSY 0x80 - -/* Type classes for Plug-and-Play probe. */ -typedef enum { - PARPORT_CLASS_LEGACY = 0, /* Non-IEEE1284 device */ - PARPORT_CLASS_PRINTER, - PARPORT_CLASS_MODEM, - PARPORT_CLASS_NET, - PARPORT_CLASS_HDC, /* Hard disk controller */ - PARPORT_CLASS_PCMCIA, - PARPORT_CLASS_MEDIA, /* Multimedia device */ - PARPORT_CLASS_FDC, /* Floppy disk controller */ - PARPORT_CLASS_PORTS, - PARPORT_CLASS_SCANNER, - PARPORT_CLASS_DIGCAM, - PARPORT_CLASS_OTHER, /* Anything else */ - PARPORT_CLASS_UNSPEC, /* No CLS field in ID */ - PARPORT_CLASS_SCSIADAPTER -} parport_device_class; - -/* The "modes" entry in parport is a bit field representing the - capabilities of the hardware. */ -#define PARPORT_MODE_PCSPP (1<<0) /* IBM PC registers available. */ -#define PARPORT_MODE_TRISTATE (1<<1) /* Can tristate. */ -#define PARPORT_MODE_EPP (1<<2) /* Hardware EPP. */ -#define PARPORT_MODE_ECP (1<<3) /* Hardware ECP. */ -#define PARPORT_MODE_COMPAT (1<<4) /* Hardware 'printer protocol'. */ -#define PARPORT_MODE_DMA (1<<5) /* Hardware can DMA. */ -#define PARPORT_MODE_SAFEININT (1<<6) /* SPP registers accessible in IRQ. */ - -/* IEEE1284 modes: - Nibble mode, byte mode, ECP, ECPRLE and EPP are their own - 'extensibility request' values. Others are special. - 'Real' ECP modes must have the IEEE1284_MODE_ECP bit set. */ -#define IEEE1284_MODE_NIBBLE 0 -#define IEEE1284_MODE_BYTE (1<<0) -#define IEEE1284_MODE_COMPAT (1<<8) -#define IEEE1284_MODE_BECP (1<<9) /* Bounded ECP mode */ -#define IEEE1284_MODE_ECP (1<<4) -#define IEEE1284_MODE_ECPRLE (IEEE1284_MODE_ECP | (1<<5)) -#define IEEE1284_MODE_ECPSWE (1<<10) /* Software-emulated */ -#define IEEE1284_MODE_EPP (1<<6) -#define IEEE1284_MODE_EPPSL (1<<11) /* EPP 1.7 */ -#define IEEE1284_MODE_EPPSWE (1<<12) /* Software-emulated */ -#define IEEE1284_DEVICEID (1<<2) /* This is a flag */ -#define IEEE1284_EXT_LINK (1<<14) /* This flag causes the - * extensibility link to - * be requested, using - * bits 0-6. */ - -/* For the benefit of parport_read/write, you can use these with - * parport_negotiate to use address operations. They have no effect - * other than to make parport_read/write use address transfers. */ -#define IEEE1284_ADDR (1<<13) /* This is a flag */ -#define IEEE1284_DATA 0 /* So is this */ - -/* Flags for block transfer operations. */ -#define PARPORT_EPP_FAST (1<<0) /* Unreliable counts. */ -#define PARPORT_W91284PIC (1<<1) /* have a Warp9 w91284pic in the device */ - -/* The rest is for the kernel only */ -#ifdef __KERNEL__ #include #include @@ -101,6 +14,7 @@ typedef enum { #include #include #include +#include /* Define this later. */ struct parport; @@ -564,5 +478,4 @@ extern int parport_device_proc_unregister(struct pardevice *device); extern unsigned long parport_default_timeslice; extern int parport_default_spintime; -#endif /* __KERNEL__ */ #endif /* _PARPORT_H_ */ diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h index aefda0ec6e62..97a919fc9927 100644 --- a/include/linux/patchkey.h +++ b/include/linux/patchkey.h @@ -9,22 +9,12 @@ * Do not include this file directly. Please use instead. * For kernel code, use */ - -#ifndef _LINUX_PATCHKEY_H_INDIRECT -#error "patchkey.h included directly" -#endif - #ifndef _LINUX_PATCHKEY_H #define _LINUX_PATCHKEY_H -/* Endian macros. */ -#ifdef __KERNEL__ # include -#else -# include -#endif +#include -#if defined(__KERNEL__) # if defined(__BIG_ENDIAN) # define _PATCHKEY(id) (0xfd00|id) # elif defined(__LITTLE_ENDIAN) @@ -32,16 +22,4 @@ # else # error "could not determine byte order" # endif -#else -#if defined(__BYTE_ORDER) -# if __BYTE_ORDER == __BIG_ENDIAN -# define _PATCHKEY(id) (0xfd00|id) -# elif __BYTE_ORDER == __LITTLE_ENDIAN -# define _PATCHKEY(id) ((id<<8)|0x00fd) -# else -# error "could not determine byte order" -# endif -#endif -#endif - #endif /* _LINUX_PATCHKEY_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index be1de01de1c4..ee2179546c63 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -13,32 +13,9 @@ * PCI to PCI Bridge Specification * PCI System Design Guide */ - #ifndef LINUX_PCI_H #define LINUX_PCI_H -#include /* The pci register defines */ - -/* - * The PCI interface treats multi-function devices as independent - * devices. The slot/function address of each device is encoded - * in a single byte as follows: - * - * 7:3 = slot - * 2:0 = function - */ -#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07)) -#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) -#define PCI_FUNC(devfn) ((devfn) & 0x07) - -/* Ioctls for /proc/bus/pci/X/Y nodes. */ -#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) -#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ -#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ -#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ -#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ - -#ifdef __KERNEL__ #include @@ -53,6 +30,7 @@ #include #include #include +#include /* Include the ID list */ #include @@ -1831,5 +1809,4 @@ static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev) */ struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev); -#endif /* __KERNEL__ */ #endif /* LINUX_PCI_H */ diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h deleted file mode 100644 index 20ae747ddf34..000000000000 --- a/include/linux/pci_regs.h +++ /dev/null @@ -1,846 +0,0 @@ -/* - * pci_regs.h - * - * PCI standard defines - * Copyright 1994, Drew Eckhardt - * Copyright 1997--1999 Martin Mares - * - * For more information, please consult the following manuals (look at - * http://www.pcisig.com/ for how to get them): - * - * PCI BIOS Specification - * PCI Local Bus Specification - * PCI to PCI Bridge Specification - * PCI System Design Guide - * - * For hypertransport information, please consult the following manuals - * from http://www.hypertransport.org - * - * The Hypertransport I/O Link Specification - */ - -#ifndef LINUX_PCI_REGS_H -#define LINUX_PCI_REGS_H - -/* - * Under PCI, each device has 256 bytes of configuration address space, - * of which the first 64 bytes are standardized as follows: - */ -#define PCI_STD_HEADER_SIZEOF 64 -#define PCI_VENDOR_ID 0x00 /* 16 bits */ -#define PCI_DEVICE_ID 0x02 /* 16 bits */ -#define PCI_COMMAND 0x04 /* 16 bits */ -#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ -#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ -#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ -#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ -#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ -#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ -#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ -#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ -#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ -#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ -#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ - -#define PCI_STATUS 0x06 /* 16 bits */ -#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ -#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ -#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ -#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ -#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ -#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ -#define PCI_STATUS_DEVSEL_FAST 0x000 -#define PCI_STATUS_DEVSEL_MEDIUM 0x200 -#define PCI_STATUS_DEVSEL_SLOW 0x400 -#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ -#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ -#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ -#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ -#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ - -#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ -#define PCI_REVISION_ID 0x08 /* Revision ID */ -#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ -#define PCI_CLASS_DEVICE 0x0a /* Device class */ - -#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ -#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ -#define PCI_HEADER_TYPE 0x0e /* 8 bits */ -#define PCI_HEADER_TYPE_NORMAL 0 -#define PCI_HEADER_TYPE_BRIDGE 1 -#define PCI_HEADER_TYPE_CARDBUS 2 - -#define PCI_BIST 0x0f /* 8 bits */ -#define PCI_BIST_CODE_MASK 0x0f /* Return result */ -#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ -#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ - -/* - * Base addresses specify locations in memory or I/O space. - * Decoded size can be determined by writing a value of - * 0xffffffff to the register, and reading it back. Only - * 1 bits are decoded. - */ -#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ -#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ -#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ -#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ -#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ -#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ -#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ -#define PCI_BASE_ADDRESS_SPACE_IO 0x01 -#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 -#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 -#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ -#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ -#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ -#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ -#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) -#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) -/* bit 1 is reserved if address_space = 1 */ - -/* Header type 0 (normal devices) */ -#define PCI_CARDBUS_CIS 0x28 -#define PCI_SUBSYSTEM_VENDOR_ID 0x2c -#define PCI_SUBSYSTEM_ID 0x2e -#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ -#define PCI_ROM_ADDRESS_ENABLE 0x01 -#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) - -#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ - -/* 0x35-0x3b are reserved */ -#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ -#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ -#define PCI_MIN_GNT 0x3e /* 8 bits */ -#define PCI_MAX_LAT 0x3f /* 8 bits */ - -/* Header type 1 (PCI-to-PCI bridges) */ -#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ -#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ -#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ -#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ -#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ -#define PCI_IO_LIMIT 0x1d -#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ -#define PCI_IO_RANGE_TYPE_16 0x00 -#define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */ -#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */ -#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ -#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ -#define PCI_MEMORY_LIMIT 0x22 -#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL -#define PCI_MEMORY_RANGE_MASK (~0x0fUL) -#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ -#define PCI_PREF_MEMORY_LIMIT 0x26 -#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL -#define PCI_PREF_RANGE_TYPE_32 0x00 -#define PCI_PREF_RANGE_TYPE_64 0x01 -#define PCI_PREF_RANGE_MASK (~0x0fUL) -#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ -#define PCI_PREF_LIMIT_UPPER32 0x2c -#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ -#define PCI_IO_LIMIT_UPPER16 0x32 -/* 0x34 same as for htype 0 */ -/* 0x35-0x3b is reserved */ -#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_BRIDGE_CONTROL 0x3e -#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ -#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ -#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */ -#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ -#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ -#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ -#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ - -/* Header type 2 (CardBus bridges) */ -#define PCI_CB_CAPABILITY_LIST 0x14 -/* 0x15 reserved */ -#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ -#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ -#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ -#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ -#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ -#define PCI_CB_MEMORY_BASE_0 0x1c -#define PCI_CB_MEMORY_LIMIT_0 0x20 -#define PCI_CB_MEMORY_BASE_1 0x24 -#define PCI_CB_MEMORY_LIMIT_1 0x28 -#define PCI_CB_IO_BASE_0 0x2c -#define PCI_CB_IO_BASE_0_HI 0x2e -#define PCI_CB_IO_LIMIT_0 0x30 -#define PCI_CB_IO_LIMIT_0_HI 0x32 -#define PCI_CB_IO_BASE_1 0x34 -#define PCI_CB_IO_BASE_1_HI 0x36 -#define PCI_CB_IO_LIMIT_1 0x38 -#define PCI_CB_IO_LIMIT_1_HI 0x3a -#define PCI_CB_IO_RANGE_MASK (~0x03UL) -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_CB_BRIDGE_CONTROL 0x3e -#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ -#define PCI_CB_BRIDGE_CTL_SERR 0x02 -#define PCI_CB_BRIDGE_CTL_ISA 0x04 -#define PCI_CB_BRIDGE_CTL_VGA 0x08 -#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 -#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ -#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 -#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 -#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 -#define PCI_CB_SUBSYSTEM_ID 0x42 -#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ -/* 0x48-0x7f reserved */ - -/* Capability lists */ - -#define PCI_CAP_LIST_ID 0 /* Capability ID */ -#define PCI_CAP_ID_PM 0x01 /* Power Management */ -#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ -#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ -#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ -#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ -#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ -#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ -#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ -#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */ -#define PCI_CAP_ID_DBG 0x0A /* Debug port */ -#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ -#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ -#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ -#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ -#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ -#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ -#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ -#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ -#define PCI_CAP_ID_MAX PCI_CAP_ID_AF -#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ -#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ -#define PCI_CAP_SIZEOF 4 - -/* Power Management Registers */ - -#define PCI_PM_PMC 2 /* PM Capabilities Register */ -#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ -#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ -#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ -#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ -#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ -#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ -#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ -#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ -#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ -#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ -#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ -#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ -#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ -#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ -#define PCI_PM_CTRL 4 /* PM control and status register */ -#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ -#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */ -#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ -#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ -#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ -#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ -#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ -#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ -#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ -#define PCI_PM_DATA_REGISTER 7 /* (??) */ -#define PCI_PM_SIZEOF 8 - -/* AGP registers */ - -#define PCI_AGP_VERSION 2 /* BCD version number */ -#define PCI_AGP_RFU 3 /* Rest of capability flags */ -#define PCI_AGP_STATUS 4 /* Status register */ -#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ -#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ -#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ -#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ -#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ -#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ -#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ -#define PCI_AGP_COMMAND 8 /* Control register */ -#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ -#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ -#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ -#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ -#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ -#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ -#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ -#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ -#define PCI_AGP_SIZEOF 12 - -/* Vital Product Data */ - -#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ -#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ -#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ -#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ -#define PCI_CAP_VPD_SIZEOF 8 - -/* Slot Identification */ - -#define PCI_SID_ESR 2 /* Expansion Slot Register */ -#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ -#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ -#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ - -/* Message Signalled Interrupts registers */ - -#define PCI_MSI_FLAGS 2 /* Various flags */ -#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ -#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ -#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ -#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ -#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ -#define PCI_MSI_RFU 3 /* Rest of capability flags */ -#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ -#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ -#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ -#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ -#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ -#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ -#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ - -/* MSI-X registers */ -#define PCI_MSIX_FLAGS 2 -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_MASKALL (1 << 14) -#define PCI_MSIX_TABLE 4 -#define PCI_MSIX_PBA 8 -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ - -/* MSI-X entry's format */ -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 -#define PCI_MSIX_ENTRY_DATA 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 -#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 - -/* CompactPCI Hotswap Register */ - -#define PCI_CHSWP_CSR 2 /* Control and Status Register */ -#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ -#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ -#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ -#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ -#define PCI_CHSWP_PI 0x30 /* Programming Interface */ -#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ -#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ - -/* PCI Advanced Feature registers */ - -#define PCI_AF_LENGTH 2 -#define PCI_AF_CAP 3 -#define PCI_AF_CAP_TP 0x01 -#define PCI_AF_CAP_FLR 0x02 -#define PCI_AF_CTRL 4 -#define PCI_AF_CTRL_FLR 0x01 -#define PCI_AF_STATUS 5 -#define PCI_AF_STATUS_TP 0x01 -#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ - -/* PCI-X registers */ - -#define PCI_X_CMD 2 /* Modes & Features */ -#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ -#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ -#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */ -#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */ -#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */ -#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */ -#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ - /* Max # of outstanding split transactions */ -#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */ -#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */ -#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */ -#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */ -#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */ -#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */ -#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ -#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ -#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ -#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ -#define PCI_X_STATUS 4 /* PCI-X capabilities */ -#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ -#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ -#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ -#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ -#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ -#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ -#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ -#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ -#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ -#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ -#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ -#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ -#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ -#define PCI_X_ECC_CSR 8 /* ECC control and status */ -#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */ -#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ -#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ - -/* PCI Bridge Subsystem ID registers */ - -#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ -#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */ - -/* PCI Express capability registers */ - -#define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */ -#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ -#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ -#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ -#define PCI_EXP_DEVCTL 8 /* Device Control */ -#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ -#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ -#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ -#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ -#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ -#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ -#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ -#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ -#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ -#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ -#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ -#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ -#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ -#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ -#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ -#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */ -#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ -#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ -#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ -#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ -#define PCI_EXP_LNKCTL 16 /* Link Control */ -#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ -#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ -#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ -#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ -#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ -#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ -#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ -#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ -#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ -#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ -#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */ -#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ -#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ -#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ -#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ -#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ -#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints end here */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ -#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ -#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ -#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ -#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */ -#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */ -#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */ -#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */ -#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */ -#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */ -#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ -#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ -#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ -#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ -#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ -#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ -#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */ -#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ -#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ -#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ -#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ -#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ -#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ -#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ -#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ -#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ -#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ -#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */ -#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */ -#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */ -#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ -#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ -#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ -#define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ -#define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ -/* - * Note that the following PCI Express 'Capability Structure' registers - * were introduced with 'Capability Version' 0x2 (v2). These registers - * do not exist on devices with Capability Version 1. Use pci_pcie_cap2() - * to use these fields safely. - */ -#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ -#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ -#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ -#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ -#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ -#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ -#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ -#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ -#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ -#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ -#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ -#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ -#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ -#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ -#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ - -/* Extended Capabilities (PCI-X 2.0 and Express) */ -#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) -#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) -#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) - -#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ -#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ -#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ -#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ -#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ -#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ -#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ -#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ -#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ -#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ -#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor Specific */ -#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ -#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ -#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ -#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ -#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ -#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ -#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ -#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ -#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* reserved for AMD */ -#define PCI_EXT_CAP_ID_REBAR 0x15 /* resizable BAR */ -#define PCI_EXT_CAP_ID_DPA 0x16 /* dynamic power alloc */ -#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH request */ -#define PCI_EXT_CAP_ID_LTR 0x18 /* latency tolerance reporting */ -#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe */ -#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ -#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ -#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PASID - -#define PCI_EXT_CAP_DSN_SIZEOF 12 -#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 - -/* Advanced Error Reporting */ -#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ -#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ -#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ -#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ -#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ -#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ -#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ -#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ -#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ -#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ -#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ -#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ -#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ -#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */ -#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */ -#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ -#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ -#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ -#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ - /* Same bits as above */ -#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ -#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ -#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ -#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ -#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ -#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ -#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ -#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ -#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ -#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ -#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ -#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ -#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ -#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ -#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ -#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ -/* Correctable Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 -/* Non-fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 -/* Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 -#define PCI_ERR_ROOT_STATUS 48 -#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ -/* Multi ERR_COR Received */ -#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 -/* ERR_FATAL/NONFATAL Recevied */ -#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 -/* Multi ERR_FATAL/NONFATAL Recevied */ -#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 -#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ -#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ -#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ -#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ - -/* Virtual Channel */ -#define PCI_VC_PORT_REG1 4 -#define PCI_VC_REG1_EVCC 0x7 /* extended vc count */ -#define PCI_VC_PORT_REG2 8 -#define PCI_VC_REG2_32_PHASE 0x2 -#define PCI_VC_REG2_64_PHASE 0x4 -#define PCI_VC_REG2_128_PHASE 0x8 -#define PCI_VC_PORT_CTRL 12 -#define PCI_VC_PORT_STATUS 14 -#define PCI_VC_RES_CAP 16 -#define PCI_VC_RES_CTRL 20 -#define PCI_VC_RES_STATUS 26 -#define PCI_CAP_VC_BASE_SIZEOF 0x10 -#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C - -/* Power Budgeting */ -#define PCI_PWR_DSR 4 /* Data Select Register */ -#define PCI_PWR_DATA 8 /* Data Register */ -#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ -#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ -#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ -#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ -#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ -#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ -#define PCI_PWR_CAP 12 /* Capability */ -#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ -#define PCI_EXT_CAP_PWR_SIZEOF 16 - -/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */ -#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */ -#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff) -#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf) -#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff) - -/* - * Hypertransport sub capability types - * - * Unfortunately there are both 3 bit and 5 bit capability types defined - * in the HT spec, catering for that is a little messy. You probably don't - * want to use these directly, just use pci_find_ht_capability() and it - * will do the right thing for you. - */ -#define HT_3BIT_CAP_MASK 0xE0 -#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ -#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ - -#define HT_5BIT_CAP_MASK 0xF8 -#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ -#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ -#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ -#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ -#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ -#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ -#define HT_MSI_FLAGS 0x02 /* Offset to flags */ -#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ -#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ -#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ -#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ -#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ -#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ -#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ -#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ -#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ -#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ -#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ -#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ -#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ - -/* Alternative Routing-ID Interpretation */ -#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ -#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ -#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ -#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ -#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ -#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ -#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ -#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ -#define PCI_EXT_CAP_ARI_SIZEOF 8 - -/* Address Translation Service */ -#define PCI_ATS_CAP 0x04 /* ATS Capability Register */ -#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */ -#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */ -#define PCI_ATS_CTRL 0x06 /* ATS Control Register */ -#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ -#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ -#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ -#define PCI_EXT_CAP_ATS_SIZEOF 8 - -/* Page Request Interface */ -#define PCI_PRI_CTRL 0x04 /* PRI control register */ -#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */ -#define PCI_PRI_CTRL_RESET 0x02 /* Reset */ -#define PCI_PRI_STATUS 0x06 /* PRI status register */ -#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */ -#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */ -#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ -#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ -#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ -#define PCI_EXT_CAP_PRI_SIZEOF 16 - -/* PASID capability */ -#define PCI_PASID_CAP 0x04 /* PASID feature register */ -#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */ -#define PCI_PASID_CAP_PRIV 0x04 /* Priviledge Mode Supported */ -#define PCI_PASID_CTRL 0x06 /* PASID control register */ -#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ -#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ -#define PCI_PASID_CTRL_PRIV 0x04 /* Priviledge Mode Enable */ -#define PCI_EXT_CAP_PASID_SIZEOF 8 - -/* Single Root I/O Virtualization */ -#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ -#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ -#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ -#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ -#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ -#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */ -#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */ -#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ -#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ -#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ -#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */ -#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ -#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ -#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ -#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */ -#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */ -#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */ -#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */ -#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */ -#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */ -#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */ -#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */ -#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/ -#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */ -#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */ -#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */ -#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ -#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ -#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ -#define PCI_EXT_CAP_SRIOV_SIZEOF 64 - -#define PCI_LTR_MAX_SNOOP_LAT 0x4 -#define PCI_LTR_MAX_NOSNOOP_LAT 0x6 -#define PCI_LTR_VALUE_MASK 0x000003ff -#define PCI_LTR_SCALE_MASK 0x00001c00 -#define PCI_LTR_SCALE_SHIFT 10 -#define PCI_EXT_CAP_LTR_SIZEOF 8 - -/* Access Control Service */ -#define PCI_ACS_CAP 0x04 /* ACS Capability Register */ -#define PCI_ACS_SV 0x01 /* Source Validation */ -#define PCI_ACS_TB 0x02 /* Translation Blocking */ -#define PCI_ACS_RR 0x04 /* P2P Request Redirect */ -#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */ -#define PCI_ACS_UF 0x10 /* Upstream Forwarding */ -#define PCI_ACS_EC 0x20 /* P2P Egress Control */ -#define PCI_ACS_DT 0x40 /* Direct Translated P2P */ -#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ -#define PCI_ACS_CTRL 0x06 /* ACS Control Register */ -#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ - -#define PCI_VSEC_HDR 4 /* extended cap - vendor specific */ -#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ - -/* sata capability */ -#define PCI_SATA_REGS 4 /* SATA REGs specifier */ -#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ -#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ -#define PCI_SATA_SIZEOF_SHORT 8 -#define PCI_SATA_SIZEOF_LONG 16 - -/* resizable BARs */ -#define PCI_REBAR_CTRL 8 /* control register */ -#define PCI_REBAR_CTRL_NBAR_MASK (7 << 5) /* mask for # bars */ -#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # bars */ - -/* dynamic power allocation */ -#define PCI_DPA_CAP 4 /* capability register */ -#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ -#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ - -/* TPH Requester */ -#define PCI_TPH_CAP 4 /* capability register */ -#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ -#define PCI_TPH_LOC_NONE 0x000 /* no location */ -#define PCI_TPH_LOC_CAP 0x200 /* in capability */ -#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ -#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ -#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ -#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ - -#endif /* LINUX_PCI_REGS_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index b4166cdfa7a2..2e902359aee5 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -14,605 +14,8 @@ #ifndef _LINUX_PERF_EVENT_H #define _LINUX_PERF_EVENT_H -#include -#include -#include +#include -/* - * User-space ABI bits: - */ - -/* - * attr.type - */ -enum perf_type_id { - PERF_TYPE_HARDWARE = 0, - PERF_TYPE_SOFTWARE = 1, - PERF_TYPE_TRACEPOINT = 2, - PERF_TYPE_HW_CACHE = 3, - PERF_TYPE_RAW = 4, - PERF_TYPE_BREAKPOINT = 5, - - PERF_TYPE_MAX, /* non-ABI */ -}; - -/* - * Generalized performance event event_id types, used by the - * attr.event_id parameter of the sys_perf_event_open() - * syscall: - */ -enum perf_hw_id { - /* - * Common hardware events, generalized by the kernel: - */ - PERF_COUNT_HW_CPU_CYCLES = 0, - PERF_COUNT_HW_INSTRUCTIONS = 1, - PERF_COUNT_HW_CACHE_REFERENCES = 2, - PERF_COUNT_HW_CACHE_MISSES = 3, - PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, - PERF_COUNT_HW_BRANCH_MISSES = 5, - PERF_COUNT_HW_BUS_CYCLES = 6, - PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, - PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, - PERF_COUNT_HW_REF_CPU_CYCLES = 9, - - PERF_COUNT_HW_MAX, /* non-ABI */ -}; - -/* - * Generalized hardware cache events: - * - * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x - * { read, write, prefetch } x - * { accesses, misses } - */ -enum perf_hw_cache_id { - PERF_COUNT_HW_CACHE_L1D = 0, - PERF_COUNT_HW_CACHE_L1I = 1, - PERF_COUNT_HW_CACHE_LL = 2, - PERF_COUNT_HW_CACHE_DTLB = 3, - PERF_COUNT_HW_CACHE_ITLB = 4, - PERF_COUNT_HW_CACHE_BPU = 5, - PERF_COUNT_HW_CACHE_NODE = 6, - - PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_id { - PERF_COUNT_HW_CACHE_OP_READ = 0, - PERF_COUNT_HW_CACHE_OP_WRITE = 1, - PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, - - PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ -}; - -enum perf_hw_cache_op_result_id { - PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, - PERF_COUNT_HW_CACHE_RESULT_MISS = 1, - - PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ -}; - -/* - * Special "software" events provided by the kernel, even if the hardware - * does not support performance events. These events measure various - * physical and sw events of the kernel (and allow the profiling of them as - * well): - */ -enum perf_sw_ids { - PERF_COUNT_SW_CPU_CLOCK = 0, - PERF_COUNT_SW_TASK_CLOCK = 1, - PERF_COUNT_SW_PAGE_FAULTS = 2, - PERF_COUNT_SW_CONTEXT_SWITCHES = 3, - PERF_COUNT_SW_CPU_MIGRATIONS = 4, - PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, - PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, - PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, - PERF_COUNT_SW_EMULATION_FAULTS = 8, - - PERF_COUNT_SW_MAX, /* non-ABI */ -}; - -/* - * Bits that can be set in attr.sample_type to request information - * in the overflow packets. - */ -enum perf_event_sample_format { - PERF_SAMPLE_IP = 1U << 0, - PERF_SAMPLE_TID = 1U << 1, - PERF_SAMPLE_TIME = 1U << 2, - PERF_SAMPLE_ADDR = 1U << 3, - PERF_SAMPLE_READ = 1U << 4, - PERF_SAMPLE_CALLCHAIN = 1U << 5, - PERF_SAMPLE_ID = 1U << 6, - PERF_SAMPLE_CPU = 1U << 7, - PERF_SAMPLE_PERIOD = 1U << 8, - PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_RAW = 1U << 10, - PERF_SAMPLE_BRANCH_STACK = 1U << 11, - PERF_SAMPLE_REGS_USER = 1U << 12, - PERF_SAMPLE_STACK_USER = 1U << 13, - - PERF_SAMPLE_MAX = 1U << 14, /* non-ABI */ -}; - -/* - * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set - * - * If the user does not pass priv level information via branch_sample_type, - * the kernel uses the event's priv level. Branch and event priv levels do - * not have to match. Branch priv level is checked for permissions. - * - * The branch types can be combined, however BRANCH_ANY covers all types - * of branches and therefore it supersedes all the other types. - */ -enum perf_branch_sample_type { - PERF_SAMPLE_BRANCH_USER = 1U << 0, /* user branches */ - PERF_SAMPLE_BRANCH_KERNEL = 1U << 1, /* kernel branches */ - PERF_SAMPLE_BRANCH_HV = 1U << 2, /* hypervisor branches */ - - PERF_SAMPLE_BRANCH_ANY = 1U << 3, /* any branch types */ - PERF_SAMPLE_BRANCH_ANY_CALL = 1U << 4, /* any call branch */ - PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << 5, /* any return branch */ - PERF_SAMPLE_BRANCH_IND_CALL = 1U << 6, /* indirect calls */ - - PERF_SAMPLE_BRANCH_MAX = 1U << 7, /* non-ABI */ -}; - -#define PERF_SAMPLE_BRANCH_PLM_ALL \ - (PERF_SAMPLE_BRANCH_USER|\ - PERF_SAMPLE_BRANCH_KERNEL|\ - PERF_SAMPLE_BRANCH_HV) - -/* - * Values to determine ABI of the registers dump. - */ -enum perf_sample_regs_abi { - PERF_SAMPLE_REGS_ABI_NONE = 0, - PERF_SAMPLE_REGS_ABI_32 = 1, - PERF_SAMPLE_REGS_ABI_64 = 2, -}; - -/* - * The format of the data returned by read() on a perf event fd, - * as specified by attr.read_format: - * - * struct read_format { - * { u64 value; - * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED - * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING - * { u64 id; } && PERF_FORMAT_ID - * } && !PERF_FORMAT_GROUP - * - * { u64 nr; - * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED - * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING - * { u64 value; - * { u64 id; } && PERF_FORMAT_ID - * } cntr[nr]; - * } && PERF_FORMAT_GROUP - * }; - */ -enum perf_event_read_format { - PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, - PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, - PERF_FORMAT_ID = 1U << 2, - PERF_FORMAT_GROUP = 1U << 3, - - PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ -}; - -#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ -#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ -#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ -#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ - /* add: sample_stack_user */ - -/* - * Hardware event_id to monitor via a performance monitoring event: - */ -struct perf_event_attr { - - /* - * Major type: hardware/software/tracepoint/etc. - */ - __u32 type; - - /* - * Size of the attr structure, for fwd/bwd compat. - */ - __u32 size; - - /* - * Type specific configuration information. - */ - __u64 config; - - union { - __u64 sample_period; - __u64 sample_freq; - }; - - __u64 sample_type; - __u64 read_format; - - __u64 disabled : 1, /* off by default */ - inherit : 1, /* children inherit it */ - pinned : 1, /* must always be on PMU */ - exclusive : 1, /* only group on PMU */ - exclude_user : 1, /* don't count user */ - exclude_kernel : 1, /* ditto kernel */ - exclude_hv : 1, /* ditto hypervisor */ - exclude_idle : 1, /* don't count when idle */ - mmap : 1, /* include mmap data */ - comm : 1, /* include comm data */ - freq : 1, /* use freq, not period */ - inherit_stat : 1, /* per task counts */ - enable_on_exec : 1, /* next exec enables */ - task : 1, /* trace fork/exit */ - watermark : 1, /* wakeup_watermark */ - /* - * precise_ip: - * - * 0 - SAMPLE_IP can have arbitrary skid - * 1 - SAMPLE_IP must have constant skid - * 2 - SAMPLE_IP requested to have 0 skid - * 3 - SAMPLE_IP must have 0 skid - * - * See also PERF_RECORD_MISC_EXACT_IP - */ - precise_ip : 2, /* skid constraint */ - mmap_data : 1, /* non-exec mmap data */ - sample_id_all : 1, /* sample_type all events */ - - exclude_host : 1, /* don't count in host */ - exclude_guest : 1, /* don't count in guest */ - - exclude_callchain_kernel : 1, /* exclude kernel callchains */ - exclude_callchain_user : 1, /* exclude user callchains */ - - __reserved_1 : 41; - - union { - __u32 wakeup_events; /* wakeup every n events */ - __u32 wakeup_watermark; /* bytes before wakeup */ - }; - - __u32 bp_type; - union { - __u64 bp_addr; - __u64 config1; /* extension of config */ - }; - union { - __u64 bp_len; - __u64 config2; /* extension of config1 */ - }; - __u64 branch_sample_type; /* enum perf_branch_sample_type */ - - /* - * Defines set of user regs to dump on samples. - * See asm/perf_regs.h for details. - */ - __u64 sample_regs_user; - - /* - * Defines size of the user stack to dump on samples. - */ - __u32 sample_stack_user; - - /* Align to u64. */ - __u32 __reserved_2; -}; - -#define perf_flags(attr) (*(&(attr)->read_format + 1)) - -/* - * Ioctls that can be done on a perf event fd: - */ -#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) -#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) -#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) -#define PERF_EVENT_IOC_RESET _IO ('$', 3) -#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) -#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) -#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) - -enum perf_event_ioc_flags { - PERF_IOC_FLAG_GROUP = 1U << 0, -}; - -/* - * Structure of the page that can be mapped via mmap - */ -struct perf_event_mmap_page { - __u32 version; /* version number of this structure */ - __u32 compat_version; /* lowest version this is compat with */ - - /* - * Bits needed to read the hw events in user-space. - * - * u32 seq, time_mult, time_shift, idx, width; - * u64 count, enabled, running; - * u64 cyc, time_offset; - * s64 pmc = 0; - * - * do { - * seq = pc->lock; - * barrier() - * - * enabled = pc->time_enabled; - * running = pc->time_running; - * - * if (pc->cap_usr_time && enabled != running) { - * cyc = rdtsc(); - * time_offset = pc->time_offset; - * time_mult = pc->time_mult; - * time_shift = pc->time_shift; - * } - * - * idx = pc->index; - * count = pc->offset; - * if (pc->cap_usr_rdpmc && idx) { - * width = pc->pmc_width; - * pmc = rdpmc(idx - 1); - * } - * - * barrier(); - * } while (pc->lock != seq); - * - * NOTE: for obvious reason this only works on self-monitoring - * processes. - */ - __u32 lock; /* seqlock for synchronization */ - __u32 index; /* hardware event identifier */ - __s64 offset; /* add to hardware event value */ - __u64 time_enabled; /* time event active */ - __u64 time_running; /* time event on cpu */ - union { - __u64 capabilities; - __u64 cap_usr_time : 1, - cap_usr_rdpmc : 1, - cap_____res : 62; - }; - - /* - * If cap_usr_rdpmc this field provides the bit-width of the value - * read using the rdpmc() or equivalent instruction. This can be used - * to sign extend the result like: - * - * pmc <<= 64 - width; - * pmc >>= 64 - width; // signed shift right - * count += pmc; - */ - __u16 pmc_width; - - /* - * If cap_usr_time the below fields can be used to compute the time - * delta since time_enabled (in ns) using rdtsc or similar. - * - * u64 quot, rem; - * u64 delta; - * - * quot = (cyc >> time_shift); - * rem = cyc & ((1 << time_shift) - 1); - * delta = time_offset + quot * time_mult + - * ((rem * time_mult) >> time_shift); - * - * Where time_offset,time_mult,time_shift and cyc are read in the - * seqcount loop described above. This delta can then be added to - * enabled and possible running (if idx), improving the scaling: - * - * enabled += delta; - * if (idx) - * running += delta; - * - * quot = count / running; - * rem = count % running; - * count = quot * enabled + (rem * enabled) / running; - */ - __u16 time_shift; - __u32 time_mult; - __u64 time_offset; - - /* - * Hole for extension of the self monitor capabilities - */ - - __u64 __reserved[120]; /* align to 1k */ - - /* - * Control data for the mmap() data buffer. - * - * User-space reading the @data_head value should issue an rmb(), on - * SMP capable platforms, after reading this value -- see - * perf_event_wakeup(). - * - * When the mapping is PROT_WRITE the @data_tail value should be - * written by userspace to reflect the last read data. In this case - * the kernel will not over-write unread data. - */ - __u64 data_head; /* head in the data section */ - __u64 data_tail; /* user-space written tail */ -}; - -#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) -#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) -#define PERF_RECORD_MISC_KERNEL (1 << 0) -#define PERF_RECORD_MISC_USER (2 << 0) -#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) -#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) -#define PERF_RECORD_MISC_GUEST_USER (5 << 0) - -/* - * Indicates that the content of PERF_SAMPLE_IP points to - * the actual instruction that triggered the event. See also - * perf_event_attr::precise_ip. - */ -#define PERF_RECORD_MISC_EXACT_IP (1 << 14) -/* - * Reserve the last bit to indicate some extended misc field - */ -#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) - -struct perf_event_header { - __u32 type; - __u16 misc; - __u16 size; -}; - -enum perf_event_type { - - /* - * If perf_event_attr.sample_id_all is set then all event types will - * have the sample_type selected fields related to where/when - * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID) - * described in PERF_RECORD_SAMPLE below, it will be stashed just after - * the perf_event_header and the fields already present for the existing - * fields, i.e. at the end of the payload. That way a newer perf.data - * file will be supported by older perf tools, with these new optional - * fields being ignored. - * - * The MMAP events record the PROT_EXEC mappings so that we can - * correlate userspace IPs to code. They have the following structure: - * - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * u64 addr; - * u64 len; - * u64 pgoff; - * char filename[]; - * }; - */ - PERF_RECORD_MMAP = 1, - - /* - * struct { - * struct perf_event_header header; - * u64 id; - * u64 lost; - * }; - */ - PERF_RECORD_LOST = 2, - - /* - * struct { - * struct perf_event_header header; - * - * u32 pid, tid; - * char comm[]; - * }; - */ - PERF_RECORD_COMM = 3, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_RECORD_EXIT = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; - * u64 stream_id; - * }; - */ - PERF_RECORD_THROTTLE = 5, - PERF_RECORD_UNTHROTTLE = 6, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, ppid; - * u32 tid, ptid; - * u64 time; - * }; - */ - PERF_RECORD_FORK = 7, - - /* - * struct { - * struct perf_event_header header; - * u32 pid, tid; - * - * struct read_format values; - * }; - */ - PERF_RECORD_READ = 8, - - /* - * struct { - * struct perf_event_header header; - * - * { u64 ip; } && PERF_SAMPLE_IP - * { u32 pid, tid; } && PERF_SAMPLE_TID - * { u64 time; } && PERF_SAMPLE_TIME - * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 id; } && PERF_SAMPLE_ID - * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID - * { u32 cpu, res; } && PERF_SAMPLE_CPU - * { u64 period; } && PERF_SAMPLE_PERIOD - * - * { struct read_format values; } && PERF_SAMPLE_READ - * - * { u64 nr, - * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN - * - * # - * # The RAW record below is opaque data wrt the ABI - * # - * # That is, the ABI doesn't make any promises wrt to - * # the stability of its content, it may vary depending - * # on event, hardware, kernel version and phase of - * # the moon. - * # - * # In other words, PERF_SAMPLE_RAW contents are not an ABI. - * # - * - * { u32 size; - * char data[size];}&& PERF_SAMPLE_RAW - * - * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK - * - * { u64 abi; # enum perf_sample_regs_abi - * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER - * - * { u64 size; - * char data[size]; - * u64 dyn_size; } && PERF_SAMPLE_STACK_USER - * }; - */ - PERF_RECORD_SAMPLE = 9, - - PERF_RECORD_MAX, /* non-ABI */ -}; - -#define PERF_MAX_STACK_DEPTH 127 - -enum perf_callchain_context { - PERF_CONTEXT_HV = (__u64)-32, - PERF_CONTEXT_KERNEL = (__u64)-128, - PERF_CONTEXT_USER = (__u64)-512, - - PERF_CONTEXT_GUEST = (__u64)-2048, - PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, - PERF_CONTEXT_GUEST_USER = (__u64)-2560, - - PERF_CONTEXT_MAX = (__u64)-4095, -}; - -#define PERF_FLAG_FD_NO_GROUP (1U << 0) -#define PERF_FLAG_FD_OUTPUT (1U << 1) -#define PERF_FLAG_PID_CGROUP (1U << 2) /* pid=cgroup id, per-cpu mode only */ - -#ifdef __KERNEL__ /* * Kernel-internal data types and definitions: */ @@ -1422,5 +825,4 @@ _name##_show(struct device *dev, \ \ static struct device_attribute format_attr_##_name = __ATTR_RO(_name) -#endif /* __KERNEL__ */ #endif /* _LINUX_PERF_EVENT_H */ diff --git a/include/linux/personality.h b/include/linux/personality.h index 8fc7dd1a57ff..646c0a7d50fa 100644 --- a/include/linux/personality.h +++ b/include/linux/personality.h @@ -1,7 +1,8 @@ #ifndef _LINUX_PERSONALITY_H #define _LINUX_PERSONALITY_H -#ifdef __KERNEL__ +#include + /* * Handling of different ABIs (personalities). @@ -14,72 +15,6 @@ extern int register_exec_domain(struct exec_domain *); extern int unregister_exec_domain(struct exec_domain *); extern int __set_personality(unsigned int); -#endif /* __KERNEL__ */ - -/* - * Flags for bug emulation. - * - * These occupy the top three bytes. - */ -enum { - UNAME26 = 0x0020000, - ADDR_NO_RANDOMIZE = 0x0040000, /* disable randomization of VA space */ - FDPIC_FUNCPTRS = 0x0080000, /* userspace function ptrs point to descriptors - * (signal handling) - */ - MMAP_PAGE_ZERO = 0x0100000, - ADDR_COMPAT_LAYOUT = 0x0200000, - READ_IMPLIES_EXEC = 0x0400000, - ADDR_LIMIT_32BIT = 0x0800000, - SHORT_INODE = 0x1000000, - WHOLE_SECONDS = 0x2000000, - STICKY_TIMEOUTS = 0x4000000, - ADDR_LIMIT_3GB = 0x8000000, -}; - -/* - * Security-relevant compatibility flags that must be - * cleared upon setuid or setgid exec: - */ -#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \ - ADDR_NO_RANDOMIZE | \ - ADDR_COMPAT_LAYOUT | \ - MMAP_PAGE_ZERO) - -/* - * Personality types. - * - * These go in the low byte. Avoid using the top bit, it will - * conflict with error returns. - */ -enum { - PER_LINUX = 0x0000, - PER_LINUX_32BIT = 0x0000 | ADDR_LIMIT_32BIT, - PER_LINUX_FDPIC = 0x0000 | FDPIC_FUNCPTRS, - PER_SVR4 = 0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, - PER_SVR3 = 0x0002 | STICKY_TIMEOUTS | SHORT_INODE, - PER_SCOSVR3 = 0x0003 | STICKY_TIMEOUTS | - WHOLE_SECONDS | SHORT_INODE, - PER_OSR5 = 0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS, - PER_WYSEV386 = 0x0004 | STICKY_TIMEOUTS | SHORT_INODE, - PER_ISCR4 = 0x0005 | STICKY_TIMEOUTS, - PER_BSD = 0x0006, - PER_SUNOS = 0x0006 | STICKY_TIMEOUTS, - PER_XENIX = 0x0007 | STICKY_TIMEOUTS | SHORT_INODE, - PER_LINUX32 = 0x0008, - PER_LINUX32_3GB = 0x0008 | ADDR_LIMIT_3GB, - PER_IRIX32 = 0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */ - PER_IRIXN32 = 0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */ - PER_IRIX64 = 0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */ - PER_RISCOS = 0x000c, - PER_SOLARIS = 0x000d | STICKY_TIMEOUTS, - PER_UW7 = 0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO, - PER_OSF4 = 0x000f, /* OSF/1 v4 */ - PER_HPUX = 0x0010, - PER_MASK = 0x00ff, -}; - -#ifdef __KERNEL__ /* * Description of an execution domain. @@ -116,6 +51,4 @@ struct exec_domain { #define set_personality(pers) \ ((current->personality == (pers)) ? 0 : __set_personality(pers)) -#endif /* __KERNEL__ */ - #endif /* _LINUX_PERSONALITY_H */ diff --git a/include/linux/pfkeyv2.h b/include/linux/pfkeyv2.h deleted file mode 100644 index 0b80c806631f..000000000000 --- a/include/linux/pfkeyv2.h +++ /dev/null @@ -1,370 +0,0 @@ -/* PF_KEY user interface, this is defined by rfc2367 so - * do not make arbitrary modifications or else this header - * file will not be compliant. - */ - -#ifndef _LINUX_PFKEY2_H -#define _LINUX_PFKEY2_H - -#include - -#define PF_KEY_V2 2 -#define PFKEYV2_REVISION 199806L - -struct sadb_msg { - __u8 sadb_msg_version; - __u8 sadb_msg_type; - __u8 sadb_msg_errno; - __u8 sadb_msg_satype; - __u16 sadb_msg_len; - __u16 sadb_msg_reserved; - __u32 sadb_msg_seq; - __u32 sadb_msg_pid; -} __attribute__((packed)); -/* sizeof(struct sadb_msg) == 16 */ - -struct sadb_ext { - __u16 sadb_ext_len; - __u16 sadb_ext_type; -} __attribute__((packed)); -/* sizeof(struct sadb_ext) == 4 */ - -struct sadb_sa { - __u16 sadb_sa_len; - __u16 sadb_sa_exttype; - __be32 sadb_sa_spi; - __u8 sadb_sa_replay; - __u8 sadb_sa_state; - __u8 sadb_sa_auth; - __u8 sadb_sa_encrypt; - __u32 sadb_sa_flags; -} __attribute__((packed)); -/* sizeof(struct sadb_sa) == 16 */ - -struct sadb_lifetime { - __u16 sadb_lifetime_len; - __u16 sadb_lifetime_exttype; - __u32 sadb_lifetime_allocations; - __u64 sadb_lifetime_bytes; - __u64 sadb_lifetime_addtime; - __u64 sadb_lifetime_usetime; -} __attribute__((packed)); -/* sizeof(struct sadb_lifetime) == 32 */ - -struct sadb_address { - __u16 sadb_address_len; - __u16 sadb_address_exttype; - __u8 sadb_address_proto; - __u8 sadb_address_prefixlen; - __u16 sadb_address_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_address) == 8 */ - -struct sadb_key { - __u16 sadb_key_len; - __u16 sadb_key_exttype; - __u16 sadb_key_bits; - __u16 sadb_key_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_key) == 8 */ - -struct sadb_ident { - __u16 sadb_ident_len; - __u16 sadb_ident_exttype; - __u16 sadb_ident_type; - __u16 sadb_ident_reserved; - __u64 sadb_ident_id; -} __attribute__((packed)); -/* sizeof(struct sadb_ident) == 16 */ - -struct sadb_sens { - __u16 sadb_sens_len; - __u16 sadb_sens_exttype; - __u32 sadb_sens_dpd; - __u8 sadb_sens_sens_level; - __u8 sadb_sens_sens_len; - __u8 sadb_sens_integ_level; - __u8 sadb_sens_integ_len; - __u32 sadb_sens_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_sens) == 16 */ - -/* followed by: - __u64 sadb_sens_bitmap[sens_len]; - __u64 sadb_integ_bitmap[integ_len]; */ - -struct sadb_prop { - __u16 sadb_prop_len; - __u16 sadb_prop_exttype; - __u8 sadb_prop_replay; - __u8 sadb_prop_reserved[3]; -} __attribute__((packed)); -/* sizeof(struct sadb_prop) == 8 */ - -/* followed by: - struct sadb_comb sadb_combs[(sadb_prop_len + - sizeof(__u64) - sizeof(struct sadb_prop)) / - sizeof(struct sadb_comb)]; */ - -struct sadb_comb { - __u8 sadb_comb_auth; - __u8 sadb_comb_encrypt; - __u16 sadb_comb_flags; - __u16 sadb_comb_auth_minbits; - __u16 sadb_comb_auth_maxbits; - __u16 sadb_comb_encrypt_minbits; - __u16 sadb_comb_encrypt_maxbits; - __u32 sadb_comb_reserved; - __u32 sadb_comb_soft_allocations; - __u32 sadb_comb_hard_allocations; - __u64 sadb_comb_soft_bytes; - __u64 sadb_comb_hard_bytes; - __u64 sadb_comb_soft_addtime; - __u64 sadb_comb_hard_addtime; - __u64 sadb_comb_soft_usetime; - __u64 sadb_comb_hard_usetime; -} __attribute__((packed)); -/* sizeof(struct sadb_comb) == 72 */ - -struct sadb_supported { - __u16 sadb_supported_len; - __u16 sadb_supported_exttype; - __u32 sadb_supported_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_supported) == 8 */ - -/* followed by: - struct sadb_alg sadb_algs[(sadb_supported_len + - sizeof(__u64) - sizeof(struct sadb_supported)) / - sizeof(struct sadb_alg)]; */ - -struct sadb_alg { - __u8 sadb_alg_id; - __u8 sadb_alg_ivlen; - __u16 sadb_alg_minbits; - __u16 sadb_alg_maxbits; - __u16 sadb_alg_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_alg) == 8 */ - -struct sadb_spirange { - __u16 sadb_spirange_len; - __u16 sadb_spirange_exttype; - __u32 sadb_spirange_min; - __u32 sadb_spirange_max; - __u32 sadb_spirange_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_spirange) == 16 */ - -struct sadb_x_kmprivate { - __u16 sadb_x_kmprivate_len; - __u16 sadb_x_kmprivate_exttype; - __u32 sadb_x_kmprivate_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_x_kmprivate) == 8 */ - -struct sadb_x_sa2 { - __u16 sadb_x_sa2_len; - __u16 sadb_x_sa2_exttype; - __u8 sadb_x_sa2_mode; - __u8 sadb_x_sa2_reserved1; - __u16 sadb_x_sa2_reserved2; - __u32 sadb_x_sa2_sequence; - __u32 sadb_x_sa2_reqid; -} __attribute__((packed)); -/* sizeof(struct sadb_x_sa2) == 16 */ - -struct sadb_x_policy { - __u16 sadb_x_policy_len; - __u16 sadb_x_policy_exttype; - __u16 sadb_x_policy_type; - __u8 sadb_x_policy_dir; - __u8 sadb_x_policy_reserved; - __u32 sadb_x_policy_id; - __u32 sadb_x_policy_priority; -} __attribute__((packed)); -/* sizeof(struct sadb_x_policy) == 16 */ - -struct sadb_x_ipsecrequest { - __u16 sadb_x_ipsecrequest_len; - __u16 sadb_x_ipsecrequest_proto; - __u8 sadb_x_ipsecrequest_mode; - __u8 sadb_x_ipsecrequest_level; - __u16 sadb_x_ipsecrequest_reserved1; - __u32 sadb_x_ipsecrequest_reqid; - __u32 sadb_x_ipsecrequest_reserved2; -} __attribute__((packed)); -/* sizeof(struct sadb_x_ipsecrequest) == 16 */ - -/* This defines the TYPE of Nat Traversal in use. Currently only one - * type of NAT-T is supported, draft-ietf-ipsec-udp-encaps-06 - */ -struct sadb_x_nat_t_type { - __u16 sadb_x_nat_t_type_len; - __u16 sadb_x_nat_t_type_exttype; - __u8 sadb_x_nat_t_type_type; - __u8 sadb_x_nat_t_type_reserved[3]; -} __attribute__((packed)); -/* sizeof(struct sadb_x_nat_t_type) == 8 */ - -/* Pass a NAT Traversal port (Source or Dest port) */ -struct sadb_x_nat_t_port { - __u16 sadb_x_nat_t_port_len; - __u16 sadb_x_nat_t_port_exttype; - __be16 sadb_x_nat_t_port_port; - __u16 sadb_x_nat_t_port_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_x_nat_t_port) == 8 */ - -/* Generic LSM security context */ -struct sadb_x_sec_ctx { - __u16 sadb_x_sec_len; - __u16 sadb_x_sec_exttype; - __u8 sadb_x_ctx_alg; /* LSMs: e.g., selinux == 1 */ - __u8 sadb_x_ctx_doi; - __u16 sadb_x_ctx_len; -} __attribute__((packed)); -/* sizeof(struct sadb_sec_ctx) = 8 */ - -/* Used by MIGRATE to pass addresses IKE will use to perform - * negotiation with the peer */ -struct sadb_x_kmaddress { - __u16 sadb_x_kmaddress_len; - __u16 sadb_x_kmaddress_exttype; - __u32 sadb_x_kmaddress_reserved; -} __attribute__((packed)); -/* sizeof(struct sadb_x_kmaddress) == 8 */ - -/* Message types */ -#define SADB_RESERVED 0 -#define SADB_GETSPI 1 -#define SADB_UPDATE 2 -#define SADB_ADD 3 -#define SADB_DELETE 4 -#define SADB_GET 5 -#define SADB_ACQUIRE 6 -#define SADB_REGISTER 7 -#define SADB_EXPIRE 8 -#define SADB_FLUSH 9 -#define SADB_DUMP 10 -#define SADB_X_PROMISC 11 -#define SADB_X_PCHANGE 12 -#define SADB_X_SPDUPDATE 13 -#define SADB_X_SPDADD 14 -#define SADB_X_SPDDELETE 15 -#define SADB_X_SPDGET 16 -#define SADB_X_SPDACQUIRE 17 -#define SADB_X_SPDDUMP 18 -#define SADB_X_SPDFLUSH 19 -#define SADB_X_SPDSETIDX 20 -#define SADB_X_SPDEXPIRE 21 -#define SADB_X_SPDDELETE2 22 -#define SADB_X_NAT_T_NEW_MAPPING 23 -#define SADB_X_MIGRATE 24 -#define SADB_MAX 24 - -/* Security Association flags */ -#define SADB_SAFLAGS_PFS 1 -#define SADB_SAFLAGS_NOPMTUDISC 0x20000000 -#define SADB_SAFLAGS_DECAP_DSCP 0x40000000 -#define SADB_SAFLAGS_NOECN 0x80000000 - -/* Security Association states */ -#define SADB_SASTATE_LARVAL 0 -#define SADB_SASTATE_MATURE 1 -#define SADB_SASTATE_DYING 2 -#define SADB_SASTATE_DEAD 3 -#define SADB_SASTATE_MAX 3 - -/* Security Association types */ -#define SADB_SATYPE_UNSPEC 0 -#define SADB_SATYPE_AH 2 -#define SADB_SATYPE_ESP 3 -#define SADB_SATYPE_RSVP 5 -#define SADB_SATYPE_OSPFV2 6 -#define SADB_SATYPE_RIPV2 7 -#define SADB_SATYPE_MIP 8 -#define SADB_X_SATYPE_IPCOMP 9 -#define SADB_SATYPE_MAX 9 - -/* Authentication algorithms */ -#define SADB_AALG_NONE 0 -#define SADB_AALG_MD5HMAC 2 -#define SADB_AALG_SHA1HMAC 3 -#define SADB_X_AALG_SHA2_256HMAC 5 -#define SADB_X_AALG_SHA2_384HMAC 6 -#define SADB_X_AALG_SHA2_512HMAC 7 -#define SADB_X_AALG_RIPEMD160HMAC 8 -#define SADB_X_AALG_AES_XCBC_MAC 9 -#define SADB_X_AALG_NULL 251 /* kame */ -#define SADB_AALG_MAX 251 - -/* Encryption algorithms */ -#define SADB_EALG_NONE 0 -#define SADB_EALG_DESCBC 2 -#define SADB_EALG_3DESCBC 3 -#define SADB_X_EALG_CASTCBC 6 -#define SADB_X_EALG_BLOWFISHCBC 7 -#define SADB_EALG_NULL 11 -#define SADB_X_EALG_AESCBC 12 -#define SADB_X_EALG_AESCTR 13 -#define SADB_X_EALG_AES_CCM_ICV8 14 -#define SADB_X_EALG_AES_CCM_ICV12 15 -#define SADB_X_EALG_AES_CCM_ICV16 16 -#define SADB_X_EALG_AES_GCM_ICV8 18 -#define SADB_X_EALG_AES_GCM_ICV12 19 -#define SADB_X_EALG_AES_GCM_ICV16 20 -#define SADB_X_EALG_CAMELLIACBC 22 -#define SADB_X_EALG_NULL_AES_GMAC 23 -#define SADB_EALG_MAX 253 /* last EALG */ -/* private allocations should use 249-255 (RFC2407) */ -#define SADB_X_EALG_SERPENTCBC 252 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ -#define SADB_X_EALG_TWOFISHCBC 253 /* draft-ietf-ipsec-ciph-aes-cbc-00 */ - -/* Compression algorithms */ -#define SADB_X_CALG_NONE 0 -#define SADB_X_CALG_OUI 1 -#define SADB_X_CALG_DEFLATE 2 -#define SADB_X_CALG_LZS 3 -#define SADB_X_CALG_LZJH 4 -#define SADB_X_CALG_MAX 4 - -/* Extension Header values */ -#define SADB_EXT_RESERVED 0 -#define SADB_EXT_SA 1 -#define SADB_EXT_LIFETIME_CURRENT 2 -#define SADB_EXT_LIFETIME_HARD 3 -#define SADB_EXT_LIFETIME_SOFT 4 -#define SADB_EXT_ADDRESS_SRC 5 -#define SADB_EXT_ADDRESS_DST 6 -#define SADB_EXT_ADDRESS_PROXY 7 -#define SADB_EXT_KEY_AUTH 8 -#define SADB_EXT_KEY_ENCRYPT 9 -#define SADB_EXT_IDENTITY_SRC 10 -#define SADB_EXT_IDENTITY_DST 11 -#define SADB_EXT_SENSITIVITY 12 -#define SADB_EXT_PROPOSAL 13 -#define SADB_EXT_SUPPORTED_AUTH 14 -#define SADB_EXT_SUPPORTED_ENCRYPT 15 -#define SADB_EXT_SPIRANGE 16 -#define SADB_X_EXT_KMPRIVATE 17 -#define SADB_X_EXT_POLICY 18 -#define SADB_X_EXT_SA2 19 -/* The next four entries are for setting up NAT Traversal */ -#define SADB_X_EXT_NAT_T_TYPE 20 -#define SADB_X_EXT_NAT_T_SPORT 21 -#define SADB_X_EXT_NAT_T_DPORT 22 -#define SADB_X_EXT_NAT_T_OA 23 -#define SADB_X_EXT_SEC_CTX 24 -/* Used with MIGRATE to pass @ to IKE for negotiation */ -#define SADB_X_EXT_KMADDRESS 25 -#define SADB_EXT_MAX 25 - -/* Identity Extension values */ -#define SADB_IDENTTYPE_RESERVED 0 -#define SADB_IDENTTYPE_PREFIX 1 -#define SADB_IDENTTYPE_FQDN 2 -#define SADB_IDENTTYPE_USERFQDN 3 -#define SADB_IDENTTYPE_MAX 3 - -#endif /* !(_LINUX_PFKEY2_H) */ diff --git a/include/linux/pg.h b/include/linux/pg.h deleted file mode 100644 index db994bb0c794..000000000000 --- a/include/linux/pg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* pg.h (c) 1998 Grant R. Guenther - Under the terms of the GNU General Public License - - - pg.h defines the user interface to the generic ATAPI packet - command driver for parallel port ATAPI devices (pg). The - driver is loosely modelled after the generic SCSI driver, sg, - although the actual interface is different. - - The pg driver provides a simple character device interface for - sending ATAPI commands to a device. With the exception of the - ATAPI reset operation, all operations are performed by a pair - of read and write operations to the appropriate /dev/pgN device. - A write operation delivers a command and any outbound data in - a single buffer. Normally, the write will succeed unless the - device is offline or malfunctioning, or there is already another - command pending. If the write succeeds, it should be followed - immediately by a read operation, to obtain any returned data and - status information. A read will fail if there is no operation - in progress. - - As a special case, the device can be reset with a write operation, - and in this case, no following read is expected, or permitted. - - There are no ioctl() operations. Any single operation - may transfer at most PG_MAX_DATA bytes. Note that the driver must - copy the data through an internal buffer. In keeping with all - current ATAPI devices, command packets are assumed to be exactly - 12 bytes in length. - - To permit future changes to this interface, the headers in the - read and write buffers contain a single character "magic" flag. - Currently this flag must be the character "P". - -*/ - -#define PG_MAGIC 'P' -#define PG_RESET 'Z' -#define PG_COMMAND 'C' - -#define PG_MAX_DATA 32768 - -struct pg_write_hdr { - - char magic; /* == PG_MAGIC */ - char func; /* PG_RESET or PG_COMMAND */ - int dlen; /* number of bytes expected to transfer */ - int timeout; /* number of seconds before timeout */ - char packet[12]; /* packet command */ - -}; - -struct pg_read_hdr { - - char magic; /* == PG_MAGIC */ - char scsi; /* "scsi" status == sense key */ - int dlen; /* size of device transfer request */ - int duration; /* time in seconds command took */ - char pad[12]; /* not used */ - -}; - -/* end of pg.h */ diff --git a/include/linux/phantom.h b/include/linux/phantom.h deleted file mode 100644 index 94dd6645c60a..000000000000 --- a/include/linux/phantom.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2005-2007 Jiri Slaby - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __PHANTOM_H -#define __PHANTOM_H - -#include - -/* PHN_(G/S)ET_REG param */ -struct phm_reg { - __u32 reg; - __u32 value; -}; - -/* PHN_(G/S)ET_REGS param */ -struct phm_regs { - __u32 count; - __u32 mask; - __u32 values[8]; -}; - -#define PH_IOC_MAGIC 'p' -#define PHN_GET_REG _IOWR(PH_IOC_MAGIC, 0, struct phm_reg *) -#define PHN_SET_REG _IOW(PH_IOC_MAGIC, 1, struct phm_reg *) -#define PHN_GET_REGS _IOWR(PH_IOC_MAGIC, 2, struct phm_regs *) -#define PHN_SET_REGS _IOW(PH_IOC_MAGIC, 3, struct phm_regs *) -/* this ioctl tells the driver, that the caller is not OpenHaptics and might - * use improved registers update (no more phantom switchoffs when using - * libphantom) */ -#define PHN_NOT_OH _IO(PH_IOC_MAGIC, 4) -#define PHN_GETREG _IOWR(PH_IOC_MAGIC, 5, struct phm_reg) -#define PHN_SETREG _IOW(PH_IOC_MAGIC, 6, struct phm_reg) -#define PHN_GETREGS _IOWR(PH_IOC_MAGIC, 7, struct phm_regs) -#define PHN_SETREGS _IOW(PH_IOC_MAGIC, 8, struct phm_regs) - -#define PHN_CONTROL 0x6 /* control byte in iaddr space */ -#define PHN_CTL_AMP 0x1 /* switch after torques change */ -#define PHN_CTL_BUT 0x2 /* is button switched */ -#define PHN_CTL_IRQ 0x10 /* is irq enabled */ - -#define PHN_ZERO_FORCE 2048 /* zero torque on motor */ - -#endif diff --git a/include/linux/phonet.h b/include/linux/phonet.h index f48bfc80cb4b..f691b04fc5ce 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -19,169 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA */ - #ifndef LINUX_PHONET_H #define LINUX_PHONET_H -#include -#include - -/* Automatic protocol selection */ -#define PN_PROTO_TRANSPORT 0 -/* Phonet datagram socket */ -#define PN_PROTO_PHONET 1 -/* Phonet pipe */ -#define PN_PROTO_PIPE 2 -#define PHONET_NPROTO 3 - -/* Socket options for SOL_PNPIPE level */ -#define PNPIPE_ENCAP 1 -#define PNPIPE_IFINDEX 2 -#define PNPIPE_HANDLE 3 -#define PNPIPE_INITSTATE 4 - -#define PNADDR_ANY 0 -#define PNADDR_BROADCAST 0xFC -#define PNPORT_RESOURCE_ROUTING 0 - -/* Values for PNPIPE_ENCAP option */ -#define PNPIPE_ENCAP_NONE 0 -#define PNPIPE_ENCAP_IP 1 - -/* ioctls */ -#define SIOCPNGETOBJECT (SIOCPROTOPRIVATE + 0) -#define SIOCPNENABLEPIPE (SIOCPROTOPRIVATE + 13) -#define SIOCPNADDRESOURCE (SIOCPROTOPRIVATE + 14) -#define SIOCPNDELRESOURCE (SIOCPROTOPRIVATE + 15) - -/* Phonet protocol header */ -struct phonethdr { - __u8 pn_rdev; - __u8 pn_sdev; - __u8 pn_res; - __be16 pn_length; - __u8 pn_robj; - __u8 pn_sobj; -} __attribute__((packed)); - -/* Common Phonet payload header */ -struct phonetmsg { - __u8 pn_trans_id; /* transaction ID */ - __u8 pn_msg_id; /* message type */ - union { - struct { - __u8 pn_submsg_id; /* message subtype */ - __u8 pn_data[5]; - } base; - struct { - __u16 pn_e_res_id; /* extended resource ID */ - __u8 pn_e_submsg_id; /* message subtype */ - __u8 pn_e_data[3]; - } ext; - } pn_msg_u; -}; -#define PN_COMMON_MESSAGE 0xF0 -#define PN_COMMGR 0x10 -#define PN_PREFIX 0xE0 /* resource for extended messages */ -#define pn_submsg_id pn_msg_u.base.pn_submsg_id -#define pn_e_submsg_id pn_msg_u.ext.pn_e_submsg_id -#define pn_e_res_id pn_msg_u.ext.pn_e_res_id -#define pn_data pn_msg_u.base.pn_data -#define pn_e_data pn_msg_u.ext.pn_e_data - -/* data for unreachable errors */ -#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP 0x01 -#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP 0x14 -#define pn_orig_msg_id pn_data[0] -#define pn_status pn_data[1] -#define pn_e_orig_msg_id pn_e_data[0] -#define pn_e_status pn_e_data[1] - -/* Phonet socket address structure */ -struct sockaddr_pn { - __kernel_sa_family_t spn_family; - __u8 spn_obj; - __u8 spn_dev; - __u8 spn_resource; - __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3]; -} __attribute__((packed)); - -/* Well known address */ -#define PN_DEV_PC 0x10 - -static inline __u16 pn_object(__u8 addr, __u16 port) -{ - return (addr << 8) | (port & 0x3ff); -} +#include -static inline __u8 pn_obj(__u16 handle) -{ - return handle & 0xff; -} - -static inline __u8 pn_dev(__u16 handle) -{ - return handle >> 8; -} - -static inline __u16 pn_port(__u16 handle) -{ - return handle & 0x3ff; -} - -static inline __u8 pn_addr(__u16 handle) -{ - return (handle >> 8) & 0xfc; -} - -static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr) -{ - spn->spn_dev &= 0x03; - spn->spn_dev |= addr & 0xfc; -} - -static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port) -{ - spn->spn_dev &= 0xfc; - spn->spn_dev |= (port >> 8) & 0x03; - spn->spn_obj = port & 0xff; -} - -static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn, - __u16 handle) -{ - spn->spn_dev = pn_dev(handle); - spn->spn_obj = pn_obj(handle); -} - -static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn, - __u8 resource) -{ - spn->spn_resource = resource; -} - -static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn) -{ - return spn->spn_dev & 0xfc; -} - -static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn) -{ - return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj; -} - -static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn) -{ - return pn_object(spn->spn_dev, spn->spn_obj); -} - -static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn) -{ - return spn->spn_resource; -} - -/* Phonet device ioctl requests */ -#ifdef __KERNEL__ #define SIOCPNGAUTOCONF (SIOCDEVPRIVATE + 0) struct if_phonet_autoconf { @@ -195,6 +37,4 @@ struct if_phonet_req { } ifr_ifru; }; #define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h deleted file mode 100644 index 082eafaf026b..000000000000 --- a/include/linux/pkt_cls.h +++ /dev/null @@ -1,469 +0,0 @@ -#ifndef __LINUX_PKT_CLS_H -#define __LINUX_PKT_CLS_H - -#include -#include - -/* I think i could have done better macros ; for now this is stolen from - * some arch/mips code - jhs -*/ -#define _TC_MAKE32(x) ((x)) - -#define _TC_MAKEMASK1(n) (_TC_MAKE32(1) << _TC_MAKE32(n)) -#define _TC_MAKEMASK(v,n) (_TC_MAKE32((_TC_MAKE32(1)<<(v))-1) << _TC_MAKE32(n)) -#define _TC_MAKEVALUE(v,n) (_TC_MAKE32(v) << _TC_MAKE32(n)) -#define _TC_GETVALUE(v,n,m) ((_TC_MAKE32(v) & _TC_MAKE32(m)) >> _TC_MAKE32(n)) - -/* verdict bit breakdown - * -bit 0: when set -> this packet has been munged already - -bit 1: when set -> It is ok to munge this packet - -bit 2,3,4,5: Reclassify counter - sort of reverse TTL - if exceeded -assume loop - -bit 6,7: Where this packet was last seen -0: Above the transmit example at the socket level -1: on the Ingress -2: on the Egress - -bit 8: when set --> Request not to classify on ingress. - -bits 9,10,11: redirect counter - redirect TTL. Loop avoidance - - * - * */ - -#define TC_MUNGED _TC_MAKEMASK1(0) -#define SET_TC_MUNGED(v) ( TC_MUNGED | (v & ~TC_MUNGED)) -#define CLR_TC_MUNGED(v) ( v & ~TC_MUNGED) - -#define TC_OK2MUNGE _TC_MAKEMASK1(1) -#define SET_TC_OK2MUNGE(v) ( TC_OK2MUNGE | (v & ~TC_OK2MUNGE)) -#define CLR_TC_OK2MUNGE(v) ( v & ~TC_OK2MUNGE) - -#define S_TC_VERD _TC_MAKE32(2) -#define M_TC_VERD _TC_MAKEMASK(4,S_TC_VERD) -#define G_TC_VERD(x) _TC_GETVALUE(x,S_TC_VERD,M_TC_VERD) -#define V_TC_VERD(x) _TC_MAKEVALUE(x,S_TC_VERD) -#define SET_TC_VERD(v,n) ((V_TC_VERD(n)) | (v & ~M_TC_VERD)) - -#define S_TC_FROM _TC_MAKE32(6) -#define M_TC_FROM _TC_MAKEMASK(2,S_TC_FROM) -#define G_TC_FROM(x) _TC_GETVALUE(x,S_TC_FROM,M_TC_FROM) -#define V_TC_FROM(x) _TC_MAKEVALUE(x,S_TC_FROM) -#define SET_TC_FROM(v,n) ((V_TC_FROM(n)) | (v & ~M_TC_FROM)) -#define AT_STACK 0x0 -#define AT_INGRESS 0x1 -#define AT_EGRESS 0x2 - -#define TC_NCLS _TC_MAKEMASK1(8) -#define SET_TC_NCLS(v) ( TC_NCLS | (v & ~TC_NCLS)) -#define CLR_TC_NCLS(v) ( v & ~TC_NCLS) - -#define S_TC_RTTL _TC_MAKE32(9) -#define M_TC_RTTL _TC_MAKEMASK(3,S_TC_RTTL) -#define G_TC_RTTL(x) _TC_GETVALUE(x,S_TC_RTTL,M_TC_RTTL) -#define V_TC_RTTL(x) _TC_MAKEVALUE(x,S_TC_RTTL) -#define SET_TC_RTTL(v,n) ((V_TC_RTTL(n)) | (v & ~M_TC_RTTL)) - -#define S_TC_AT _TC_MAKE32(12) -#define M_TC_AT _TC_MAKEMASK(2,S_TC_AT) -#define G_TC_AT(x) _TC_GETVALUE(x,S_TC_AT,M_TC_AT) -#define V_TC_AT(x) _TC_MAKEVALUE(x,S_TC_AT) -#define SET_TC_AT(v,n) ((V_TC_AT(n)) | (v & ~M_TC_AT)) - -/* Action attributes */ -enum { - TCA_ACT_UNSPEC, - TCA_ACT_KIND, - TCA_ACT_OPTIONS, - TCA_ACT_INDEX, - TCA_ACT_STATS, - __TCA_ACT_MAX -}; - -#define TCA_ACT_MAX __TCA_ACT_MAX -#define TCA_OLD_COMPAT (TCA_ACT_MAX+1) -#define TCA_ACT_MAX_PRIO 32 -#define TCA_ACT_BIND 1 -#define TCA_ACT_NOBIND 0 -#define TCA_ACT_UNBIND 1 -#define TCA_ACT_NOUNBIND 0 -#define TCA_ACT_REPLACE 1 -#define TCA_ACT_NOREPLACE 0 -#define MAX_REC_LOOP 4 -#define MAX_RED_LOOP 4 - -#define TC_ACT_UNSPEC (-1) -#define TC_ACT_OK 0 -#define TC_ACT_RECLASSIFY 1 -#define TC_ACT_SHOT 2 -#define TC_ACT_PIPE 3 -#define TC_ACT_STOLEN 4 -#define TC_ACT_QUEUED 5 -#define TC_ACT_REPEAT 6 -#define TC_ACT_JUMP 0x10000000 - -/* Action type identifiers*/ -enum { - TCA_ID_UNSPEC=0, - TCA_ID_POLICE=1, - /* other actions go here */ - __TCA_ID_MAX=255 -}; - -#define TCA_ID_MAX __TCA_ID_MAX - -struct tc_police { - __u32 index; - int action; -#define TC_POLICE_UNSPEC TC_ACT_UNSPEC -#define TC_POLICE_OK TC_ACT_OK -#define TC_POLICE_RECLASSIFY TC_ACT_RECLASSIFY -#define TC_POLICE_SHOT TC_ACT_SHOT -#define TC_POLICE_PIPE TC_ACT_PIPE - - __u32 limit; - __u32 burst; - __u32 mtu; - struct tc_ratespec rate; - struct tc_ratespec peakrate; - int refcnt; - int bindcnt; - __u32 capab; -}; - -struct tcf_t { - __u64 install; - __u64 lastuse; - __u64 expires; -}; - -struct tc_cnt { - int refcnt; - int bindcnt; -}; - -#define tc_gen \ - __u32 index; \ - __u32 capab; \ - int action; \ - int refcnt; \ - int bindcnt - -enum { - TCA_POLICE_UNSPEC, - TCA_POLICE_TBF, - TCA_POLICE_RATE, - TCA_POLICE_PEAKRATE, - TCA_POLICE_AVRATE, - TCA_POLICE_RESULT, - __TCA_POLICE_MAX -#define TCA_POLICE_RESULT TCA_POLICE_RESULT -}; - -#define TCA_POLICE_MAX (__TCA_POLICE_MAX - 1) - -/* U32 filters */ - -#define TC_U32_HTID(h) ((h)&0xFFF00000) -#define TC_U32_USERHTID(h) (TC_U32_HTID(h)>>20) -#define TC_U32_HASH(h) (((h)>>12)&0xFF) -#define TC_U32_NODE(h) ((h)&0xFFF) -#define TC_U32_KEY(h) ((h)&0xFFFFF) -#define TC_U32_UNSPEC 0 -#define TC_U32_ROOT (0xFFF00000) - -enum { - TCA_U32_UNSPEC, - TCA_U32_CLASSID, - TCA_U32_HASH, - TCA_U32_LINK, - TCA_U32_DIVISOR, - TCA_U32_SEL, - TCA_U32_POLICE, - TCA_U32_ACT, - TCA_U32_INDEV, - TCA_U32_PCNT, - TCA_U32_MARK, - __TCA_U32_MAX -}; - -#define TCA_U32_MAX (__TCA_U32_MAX - 1) - -struct tc_u32_key { - __be32 mask; - __be32 val; - int off; - int offmask; -}; - -struct tc_u32_sel { - unsigned char flags; - unsigned char offshift; - unsigned char nkeys; - - __be16 offmask; - __u16 off; - short offoff; - - short hoff; - __be32 hmask; - struct tc_u32_key keys[0]; -}; - -struct tc_u32_mark { - __u32 val; - __u32 mask; - __u32 success; -}; - -struct tc_u32_pcnt { - __u64 rcnt; - __u64 rhit; - __u64 kcnts[0]; -}; - -/* Flags */ - -#define TC_U32_TERMINAL 1 -#define TC_U32_OFFSET 2 -#define TC_U32_VAROFFSET 4 -#define TC_U32_EAT 8 - -#define TC_U32_MAXDEPTH 8 - - -/* RSVP filter */ - -enum { - TCA_RSVP_UNSPEC, - TCA_RSVP_CLASSID, - TCA_RSVP_DST, - TCA_RSVP_SRC, - TCA_RSVP_PINFO, - TCA_RSVP_POLICE, - TCA_RSVP_ACT, - __TCA_RSVP_MAX -}; - -#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 ) - -struct tc_rsvp_gpi { - __u32 key; - __u32 mask; - int offset; -}; - -struct tc_rsvp_pinfo { - struct tc_rsvp_gpi dpi; - struct tc_rsvp_gpi spi; - __u8 protocol; - __u8 tunnelid; - __u8 tunnelhdr; - __u8 pad; -}; - -/* ROUTE filter */ - -enum { - TCA_ROUTE4_UNSPEC, - TCA_ROUTE4_CLASSID, - TCA_ROUTE4_TO, - TCA_ROUTE4_FROM, - TCA_ROUTE4_IIF, - TCA_ROUTE4_POLICE, - TCA_ROUTE4_ACT, - __TCA_ROUTE4_MAX -}; - -#define TCA_ROUTE4_MAX (__TCA_ROUTE4_MAX - 1) - - -/* FW filter */ - -enum { - TCA_FW_UNSPEC, - TCA_FW_CLASSID, - TCA_FW_POLICE, - TCA_FW_INDEV, /* used by CONFIG_NET_CLS_IND */ - TCA_FW_ACT, /* used by CONFIG_NET_CLS_ACT */ - TCA_FW_MASK, - __TCA_FW_MAX -}; - -#define TCA_FW_MAX (__TCA_FW_MAX - 1) - -/* TC index filter */ - -enum { - TCA_TCINDEX_UNSPEC, - TCA_TCINDEX_HASH, - TCA_TCINDEX_MASK, - TCA_TCINDEX_SHIFT, - TCA_TCINDEX_FALL_THROUGH, - TCA_TCINDEX_CLASSID, - TCA_TCINDEX_POLICE, - TCA_TCINDEX_ACT, - __TCA_TCINDEX_MAX -}; - -#define TCA_TCINDEX_MAX (__TCA_TCINDEX_MAX - 1) - -/* Flow filter */ - -enum { - FLOW_KEY_SRC, - FLOW_KEY_DST, - FLOW_KEY_PROTO, - FLOW_KEY_PROTO_SRC, - FLOW_KEY_PROTO_DST, - FLOW_KEY_IIF, - FLOW_KEY_PRIORITY, - FLOW_KEY_MARK, - FLOW_KEY_NFCT, - FLOW_KEY_NFCT_SRC, - FLOW_KEY_NFCT_DST, - FLOW_KEY_NFCT_PROTO_SRC, - FLOW_KEY_NFCT_PROTO_DST, - FLOW_KEY_RTCLASSID, - FLOW_KEY_SKUID, - FLOW_KEY_SKGID, - FLOW_KEY_VLAN_TAG, - FLOW_KEY_RXHASH, - __FLOW_KEY_MAX, -}; - -#define FLOW_KEY_MAX (__FLOW_KEY_MAX - 1) - -enum { - FLOW_MODE_MAP, - FLOW_MODE_HASH, -}; - -enum { - TCA_FLOW_UNSPEC, - TCA_FLOW_KEYS, - TCA_FLOW_MODE, - TCA_FLOW_BASECLASS, - TCA_FLOW_RSHIFT, - TCA_FLOW_ADDEND, - TCA_FLOW_MASK, - TCA_FLOW_XOR, - TCA_FLOW_DIVISOR, - TCA_FLOW_ACT, - TCA_FLOW_POLICE, - TCA_FLOW_EMATCHES, - TCA_FLOW_PERTURB, - __TCA_FLOW_MAX -}; - -#define TCA_FLOW_MAX (__TCA_FLOW_MAX - 1) - -/* Basic filter */ - -enum { - TCA_BASIC_UNSPEC, - TCA_BASIC_CLASSID, - TCA_BASIC_EMATCHES, - TCA_BASIC_ACT, - TCA_BASIC_POLICE, - __TCA_BASIC_MAX -}; - -#define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1) - - -/* Cgroup classifier */ - -enum { - TCA_CGROUP_UNSPEC, - TCA_CGROUP_ACT, - TCA_CGROUP_POLICE, - TCA_CGROUP_EMATCHES, - __TCA_CGROUP_MAX, -}; - -#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) - -/* Extended Matches */ - -struct tcf_ematch_tree_hdr { - __u16 nmatches; - __u16 progid; -}; - -enum { - TCA_EMATCH_TREE_UNSPEC, - TCA_EMATCH_TREE_HDR, - TCA_EMATCH_TREE_LIST, - __TCA_EMATCH_TREE_MAX -}; -#define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1) - -struct tcf_ematch_hdr { - __u16 matchid; - __u16 kind; - __u16 flags; - __u16 pad; /* currently unused */ -}; - -/* 0 1 - * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 - * +-----------------------+-+-+---+ - * | Unused |S|I| R | - * +-----------------------+-+-+---+ - * - * R(2) ::= relation to next ematch - * where: 0 0 END (last ematch) - * 0 1 AND - * 1 0 OR - * 1 1 Unused (invalid) - * I(1) ::= invert result - * S(1) ::= simple payload - */ -#define TCF_EM_REL_END 0 -#define TCF_EM_REL_AND (1<<0) -#define TCF_EM_REL_OR (1<<1) -#define TCF_EM_INVERT (1<<2) -#define TCF_EM_SIMPLE (1<<3) - -#define TCF_EM_REL_MASK 3 -#define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK) - -enum { - TCF_LAYER_LINK, - TCF_LAYER_NETWORK, - TCF_LAYER_TRANSPORT, - __TCF_LAYER_MAX -}; -#define TCF_LAYER_MAX (__TCF_LAYER_MAX - 1) - -/* Ematch type assignments - * 1..32767 Reserved for ematches inside kernel tree - * 32768..65535 Free to use, not reliable - */ -#define TCF_EM_CONTAINER 0 -#define TCF_EM_CMP 1 -#define TCF_EM_NBYTE 2 -#define TCF_EM_U32 3 -#define TCF_EM_META 4 -#define TCF_EM_TEXT 5 -#define TCF_EM_VLAN 6 -#define TCF_EM_CANID 7 -#define TCF_EM_IPSET 8 -#define TCF_EM_MAX 8 - -enum { - TCF_EM_PROG_TC -}; - -enum { - TCF_EM_OPND_EQ, - TCF_EM_OPND_GT, - TCF_EM_OPND_LT -}; - -#endif diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h deleted file mode 100644 index 32aef0a439ef..000000000000 --- a/include/linux/pkt_sched.h +++ /dev/null @@ -1,738 +0,0 @@ -#ifndef __LINUX_PKT_SCHED_H -#define __LINUX_PKT_SCHED_H - -#include - -/* Logical priority bands not depending on specific packet scheduler. - Every scheduler will map them to real traffic classes, if it has - no more precise mechanism to classify packets. - - These numbers have no special meaning, though their coincidence - with obsolete IPv6 values is not occasional :-). New IPv6 drafts - preferred full anarchy inspired by diffserv group. - - Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy - class, actually, as rule it will be handled with more care than - filler or even bulk. - */ - -#define TC_PRIO_BESTEFFORT 0 -#define TC_PRIO_FILLER 1 -#define TC_PRIO_BULK 2 -#define TC_PRIO_INTERACTIVE_BULK 4 -#define TC_PRIO_INTERACTIVE 6 -#define TC_PRIO_CONTROL 7 - -#define TC_PRIO_MAX 15 - -/* Generic queue statistics, available for all the elements. - Particular schedulers may have also their private records. - */ - -struct tc_stats { - __u64 bytes; /* Number of enqueued bytes */ - __u32 packets; /* Number of enqueued packets */ - __u32 drops; /* Packets dropped because of lack of resources */ - __u32 overlimits; /* Number of throttle events when this - * flow goes out of allocated bandwidth */ - __u32 bps; /* Current flow byte rate */ - __u32 pps; /* Current flow packet rate */ - __u32 qlen; - __u32 backlog; -}; - -struct tc_estimator { - signed char interval; - unsigned char ewma_log; -}; - -/* "Handles" - --------- - - All the traffic control objects have 32bit identifiers, or "handles". - - They can be considered as opaque numbers from user API viewpoint, - but actually they always consist of two fields: major and - minor numbers, which are interpreted by kernel specially, - that may be used by applications, though not recommended. - - F.e. qdisc handles always have minor number equal to zero, - classes (or flows) have major equal to parent qdisc major, and - minor uniquely identifying class inside qdisc. - - Macros to manipulate handles: - */ - -#define TC_H_MAJ_MASK (0xFFFF0000U) -#define TC_H_MIN_MASK (0x0000FFFFU) -#define TC_H_MAJ(h) ((h)&TC_H_MAJ_MASK) -#define TC_H_MIN(h) ((h)&TC_H_MIN_MASK) -#define TC_H_MAKE(maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) - -#define TC_H_UNSPEC (0U) -#define TC_H_ROOT (0xFFFFFFFFU) -#define TC_H_INGRESS (0xFFFFFFF1U) - -struct tc_ratespec { - unsigned char cell_log; - unsigned char __reserved; - unsigned short overhead; - short cell_align; - unsigned short mpu; - __u32 rate; -}; - -#define TC_RTAB_SIZE 1024 - -struct tc_sizespec { - unsigned char cell_log; - unsigned char size_log; - short cell_align; - int overhead; - unsigned int linklayer; - unsigned int mpu; - unsigned int mtu; - unsigned int tsize; -}; - -enum { - TCA_STAB_UNSPEC, - TCA_STAB_BASE, - TCA_STAB_DATA, - __TCA_STAB_MAX -}; - -#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) - -/* FIFO section */ - -struct tc_fifo_qopt { - __u32 limit; /* Queue length: bytes for bfifo, packets for pfifo */ -}; - -/* PRIO section */ - -#define TCQ_PRIO_BANDS 16 -#define TCQ_MIN_PRIO_BANDS 2 - -struct tc_prio_qopt { - int bands; /* Number of bands */ - __u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */ -}; - -/* MULTIQ section */ - -struct tc_multiq_qopt { - __u16 bands; /* Number of bands */ - __u16 max_bands; /* Maximum number of queues */ -}; - -/* PLUG section */ - -#define TCQ_PLUG_BUFFER 0 -#define TCQ_PLUG_RELEASE_ONE 1 -#define TCQ_PLUG_RELEASE_INDEFINITE 2 -#define TCQ_PLUG_LIMIT 3 - -struct tc_plug_qopt { - /* TCQ_PLUG_BUFFER: Inset a plug into the queue and - * buffer any incoming packets - * TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head - * to beginning of the next plug. - * TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. - * Stop buffering packets until the next TCQ_PLUG_BUFFER - * command is received (just act as a pass-thru queue). - * TCQ_PLUG_LIMIT: Increase/decrease queue size - */ - int action; - __u32 limit; -}; - -/* TBF section */ - -struct tc_tbf_qopt { - struct tc_ratespec rate; - struct tc_ratespec peakrate; - __u32 limit; - __u32 buffer; - __u32 mtu; -}; - -enum { - TCA_TBF_UNSPEC, - TCA_TBF_PARMS, - TCA_TBF_RTAB, - TCA_TBF_PTAB, - __TCA_TBF_MAX, -}; - -#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) - - -/* TEQL section */ - -/* TEQL does not require any parameters */ - -/* SFQ section */ - -struct tc_sfq_qopt { - unsigned quantum; /* Bytes per round allocated to flow */ - int perturb_period; /* Period of hash perturbation */ - __u32 limit; /* Maximal packets in queue */ - unsigned divisor; /* Hash divisor */ - unsigned flows; /* Maximal number of flows */ -}; - -struct tc_sfqred_stats { - __u32 prob_drop; /* Early drops, below max threshold */ - __u32 forced_drop; /* Early drops, after max threshold */ - __u32 prob_mark; /* Marked packets, below max threshold */ - __u32 forced_mark; /* Marked packets, after max threshold */ - __u32 prob_mark_head; /* Marked packets, below max threshold */ - __u32 forced_mark_head;/* Marked packets, after max threshold */ -}; - -struct tc_sfq_qopt_v1 { - struct tc_sfq_qopt v0; - unsigned int depth; /* max number of packets per flow */ - unsigned int headdrop; -/* SFQRED parameters */ - __u32 limit; /* HARD maximal flow queue length (bytes) */ - __u32 qth_min; /* Min average length threshold (bytes) */ - __u32 qth_max; /* Max average length threshold (bytes) */ - unsigned char Wlog; /* log(W) */ - unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ - unsigned char Scell_log; /* cell size for idle damping */ - unsigned char flags; - __u32 max_P; /* probability, high resolution */ -/* SFQRED stats */ - struct tc_sfqred_stats stats; -}; - - -struct tc_sfq_xstats { - __s32 allot; -}; - -/* RED section */ - -enum { - TCA_RED_UNSPEC, - TCA_RED_PARMS, - TCA_RED_STAB, - TCA_RED_MAX_P, - __TCA_RED_MAX, -}; - -#define TCA_RED_MAX (__TCA_RED_MAX - 1) - -struct tc_red_qopt { - __u32 limit; /* HARD maximal queue length (bytes) */ - __u32 qth_min; /* Min average length threshold (bytes) */ - __u32 qth_max; /* Max average length threshold (bytes) */ - unsigned char Wlog; /* log(W) */ - unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ - unsigned char Scell_log; /* cell size for idle damping */ - unsigned char flags; -#define TC_RED_ECN 1 -#define TC_RED_HARDDROP 2 -#define TC_RED_ADAPTATIVE 4 -}; - -struct tc_red_xstats { - __u32 early; /* Early drops */ - __u32 pdrop; /* Drops due to queue limits */ - __u32 other; /* Drops due to drop() calls */ - __u32 marked; /* Marked packets */ -}; - -/* GRED section */ - -#define MAX_DPs 16 - -enum { - TCA_GRED_UNSPEC, - TCA_GRED_PARMS, - TCA_GRED_STAB, - TCA_GRED_DPS, - TCA_GRED_MAX_P, - __TCA_GRED_MAX, -}; - -#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) - -struct tc_gred_qopt { - __u32 limit; /* HARD maximal queue length (bytes) */ - __u32 qth_min; /* Min average length threshold (bytes) */ - __u32 qth_max; /* Max average length threshold (bytes) */ - __u32 DP; /* up to 2^32 DPs */ - __u32 backlog; - __u32 qave; - __u32 forced; - __u32 early; - __u32 other; - __u32 pdrop; - __u8 Wlog; /* log(W) */ - __u8 Plog; /* log(P_max/(qth_max-qth_min)) */ - __u8 Scell_log; /* cell size for idle damping */ - __u8 prio; /* prio of this VQ */ - __u32 packets; - __u32 bytesin; -}; - -/* gred setup */ -struct tc_gred_sopt { - __u32 DPs; - __u32 def_DP; - __u8 grio; - __u8 flags; - __u16 pad1; -}; - -/* CHOKe section */ - -enum { - TCA_CHOKE_UNSPEC, - TCA_CHOKE_PARMS, - TCA_CHOKE_STAB, - TCA_CHOKE_MAX_P, - __TCA_CHOKE_MAX, -}; - -#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) - -struct tc_choke_qopt { - __u32 limit; /* Hard queue length (packets) */ - __u32 qth_min; /* Min average threshold (packets) */ - __u32 qth_max; /* Max average threshold (packets) */ - unsigned char Wlog; /* log(W) */ - unsigned char Plog; /* log(P_max/(qth_max-qth_min)) */ - unsigned char Scell_log; /* cell size for idle damping */ - unsigned char flags; /* see RED flags */ -}; - -struct tc_choke_xstats { - __u32 early; /* Early drops */ - __u32 pdrop; /* Drops due to queue limits */ - __u32 other; /* Drops due to drop() calls */ - __u32 marked; /* Marked packets */ - __u32 matched; /* Drops due to flow match */ -}; - -/* HTB section */ -#define TC_HTB_NUMPRIO 8 -#define TC_HTB_MAXDEPTH 8 -#define TC_HTB_PROTOVER 3 /* the same as HTB and TC's major */ - -struct tc_htb_opt { - struct tc_ratespec rate; - struct tc_ratespec ceil; - __u32 buffer; - __u32 cbuffer; - __u32 quantum; - __u32 level; /* out only */ - __u32 prio; -}; -struct tc_htb_glob { - __u32 version; /* to match HTB/TC */ - __u32 rate2quantum; /* bps->quantum divisor */ - __u32 defcls; /* default class number */ - __u32 debug; /* debug flags */ - - /* stats */ - __u32 direct_pkts; /* count of non shaped packets */ -}; -enum { - TCA_HTB_UNSPEC, - TCA_HTB_PARMS, - TCA_HTB_INIT, - TCA_HTB_CTAB, - TCA_HTB_RTAB, - __TCA_HTB_MAX, -}; - -#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) - -struct tc_htb_xstats { - __u32 lends; - __u32 borrows; - __u32 giants; /* too big packets (rate will not be accurate) */ - __u32 tokens; - __u32 ctokens; -}; - -/* HFSC section */ - -struct tc_hfsc_qopt { - __u16 defcls; /* default class */ -}; - -struct tc_service_curve { - __u32 m1; /* slope of the first segment in bps */ - __u32 d; /* x-projection of the first segment in us */ - __u32 m2; /* slope of the second segment in bps */ -}; - -struct tc_hfsc_stats { - __u64 work; /* total work done */ - __u64 rtwork; /* work done by real-time criteria */ - __u32 period; /* current period */ - __u32 level; /* class level in hierarchy */ -}; - -enum { - TCA_HFSC_UNSPEC, - TCA_HFSC_RSC, - TCA_HFSC_FSC, - TCA_HFSC_USC, - __TCA_HFSC_MAX, -}; - -#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) - - -/* CBQ section */ - -#define TC_CBQ_MAXPRIO 8 -#define TC_CBQ_MAXLEVEL 8 -#define TC_CBQ_DEF_EWMA 5 - -struct tc_cbq_lssopt { - unsigned char change; - unsigned char flags; -#define TCF_CBQ_LSS_BOUNDED 1 -#define TCF_CBQ_LSS_ISOLATED 2 - unsigned char ewma_log; - unsigned char level; -#define TCF_CBQ_LSS_FLAGS 1 -#define TCF_CBQ_LSS_EWMA 2 -#define TCF_CBQ_LSS_MAXIDLE 4 -#define TCF_CBQ_LSS_MINIDLE 8 -#define TCF_CBQ_LSS_OFFTIME 0x10 -#define TCF_CBQ_LSS_AVPKT 0x20 - __u32 maxidle; - __u32 minidle; - __u32 offtime; - __u32 avpkt; -}; - -struct tc_cbq_wrropt { - unsigned char flags; - unsigned char priority; - unsigned char cpriority; - unsigned char __reserved; - __u32 allot; - __u32 weight; -}; - -struct tc_cbq_ovl { - unsigned char strategy; -#define TC_CBQ_OVL_CLASSIC 0 -#define TC_CBQ_OVL_DELAY 1 -#define TC_CBQ_OVL_LOWPRIO 2 -#define TC_CBQ_OVL_DROP 3 -#define TC_CBQ_OVL_RCLASSIC 4 - unsigned char priority2; - __u16 pad; - __u32 penalty; -}; - -struct tc_cbq_police { - unsigned char police; - unsigned char __res1; - unsigned short __res2; -}; - -struct tc_cbq_fopt { - __u32 split; - __u32 defmap; - __u32 defchange; -}; - -struct tc_cbq_xstats { - __u32 borrows; - __u32 overactions; - __s32 avgidle; - __s32 undertime; -}; - -enum { - TCA_CBQ_UNSPEC, - TCA_CBQ_LSSOPT, - TCA_CBQ_WRROPT, - TCA_CBQ_FOPT, - TCA_CBQ_OVL_STRATEGY, - TCA_CBQ_RATE, - TCA_CBQ_RTAB, - TCA_CBQ_POLICE, - __TCA_CBQ_MAX, -}; - -#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1) - -/* dsmark section */ - -enum { - TCA_DSMARK_UNSPEC, - TCA_DSMARK_INDICES, - TCA_DSMARK_DEFAULT_INDEX, - TCA_DSMARK_SET_TC_INDEX, - TCA_DSMARK_MASK, - TCA_DSMARK_VALUE, - __TCA_DSMARK_MAX, -}; - -#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1) - -/* ATM section */ - -enum { - TCA_ATM_UNSPEC, - TCA_ATM_FD, /* file/socket descriptor */ - TCA_ATM_PTR, /* pointer to descriptor - later */ - TCA_ATM_HDR, /* LL header */ - TCA_ATM_EXCESS, /* excess traffic class (0 for CLP) */ - TCA_ATM_ADDR, /* PVC address (for output only) */ - TCA_ATM_STATE, /* VC state (ATM_VS_*; for output only) */ - __TCA_ATM_MAX, -}; - -#define TCA_ATM_MAX (__TCA_ATM_MAX - 1) - -/* Network emulator */ - -enum { - TCA_NETEM_UNSPEC, - TCA_NETEM_CORR, - TCA_NETEM_DELAY_DIST, - TCA_NETEM_REORDER, - TCA_NETEM_CORRUPT, - TCA_NETEM_LOSS, - TCA_NETEM_RATE, - TCA_NETEM_ECN, - __TCA_NETEM_MAX, -}; - -#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) - -struct tc_netem_qopt { - __u32 latency; /* added delay (us) */ - __u32 limit; /* fifo limit (packets) */ - __u32 loss; /* random packet loss (0=none ~0=100%) */ - __u32 gap; /* re-ordering gap (0 for none) */ - __u32 duplicate; /* random packet dup (0=none ~0=100%) */ - __u32 jitter; /* random jitter in latency (us) */ -}; - -struct tc_netem_corr { - __u32 delay_corr; /* delay correlation */ - __u32 loss_corr; /* packet loss correlation */ - __u32 dup_corr; /* duplicate correlation */ -}; - -struct tc_netem_reorder { - __u32 probability; - __u32 correlation; -}; - -struct tc_netem_corrupt { - __u32 probability; - __u32 correlation; -}; - -struct tc_netem_rate { - __u32 rate; /* byte/s */ - __s32 packet_overhead; - __u32 cell_size; - __s32 cell_overhead; -}; - -enum { - NETEM_LOSS_UNSPEC, - NETEM_LOSS_GI, /* General Intuitive - 4 state model */ - NETEM_LOSS_GE, /* Gilbert Elliot models */ - __NETEM_LOSS_MAX -}; -#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) - -/* State transition probabilities for 4 state model */ -struct tc_netem_gimodel { - __u32 p13; - __u32 p31; - __u32 p32; - __u32 p14; - __u32 p23; -}; - -/* Gilbert-Elliot models */ -struct tc_netem_gemodel { - __u32 p; - __u32 r; - __u32 h; - __u32 k1; -}; - -#define NETEM_DIST_SCALE 8192 -#define NETEM_DIST_MAX 16384 - -/* DRR */ - -enum { - TCA_DRR_UNSPEC, - TCA_DRR_QUANTUM, - __TCA_DRR_MAX -}; - -#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) - -struct tc_drr_stats { - __u32 deficit; -}; - -/* MQPRIO */ -#define TC_QOPT_BITMASK 15 -#define TC_QOPT_MAX_QUEUE 16 - -struct tc_mqprio_qopt { - __u8 num_tc; - __u8 prio_tc_map[TC_QOPT_BITMASK + 1]; - __u8 hw; - __u16 count[TC_QOPT_MAX_QUEUE]; - __u16 offset[TC_QOPT_MAX_QUEUE]; -}; - -/* SFB */ - -enum { - TCA_SFB_UNSPEC, - TCA_SFB_PARMS, - __TCA_SFB_MAX, -}; - -#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) - -/* - * Note: increment, decrement are Q0.16 fixed-point values. - */ -struct tc_sfb_qopt { - __u32 rehash_interval; /* delay between hash move, in ms */ - __u32 warmup_time; /* double buffering warmup time in ms (warmup_time < rehash_interval) */ - __u32 max; /* max len of qlen_min */ - __u32 bin_size; /* maximum queue length per bin */ - __u32 increment; /* probability increment, (d1 in Blue) */ - __u32 decrement; /* probability decrement, (d2 in Blue) */ - __u32 limit; /* max SFB queue length */ - __u32 penalty_rate; /* inelastic flows are rate limited to 'rate' pps */ - __u32 penalty_burst; -}; - -struct tc_sfb_xstats { - __u32 earlydrop; - __u32 penaltydrop; - __u32 bucketdrop; - __u32 queuedrop; - __u32 childdrop; /* drops in child qdisc */ - __u32 marked; - __u32 maxqlen; - __u32 maxprob; - __u32 avgprob; -}; - -#define SFB_MAX_PROB 0xFFFF - -/* QFQ */ -enum { - TCA_QFQ_UNSPEC, - TCA_QFQ_WEIGHT, - TCA_QFQ_LMAX, - __TCA_QFQ_MAX -}; - -#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) - -struct tc_qfq_stats { - __u32 weight; - __u32 lmax; -}; - -/* CODEL */ - -enum { - TCA_CODEL_UNSPEC, - TCA_CODEL_TARGET, - TCA_CODEL_LIMIT, - TCA_CODEL_INTERVAL, - TCA_CODEL_ECN, - __TCA_CODEL_MAX -}; - -#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) - -struct tc_codel_xstats { - __u32 maxpacket; /* largest packet we've seen so far */ - __u32 count; /* how many drops we've done since the last time we - * entered dropping state - */ - __u32 lastcount; /* count at entry to dropping state */ - __u32 ldelay; /* in-queue delay seen by most recently dequeued packet */ - __s32 drop_next; /* time to drop next packet */ - __u32 drop_overlimit; /* number of time max qdisc packet limit was hit */ - __u32 ecn_mark; /* number of packets we ECN marked instead of dropped */ - __u32 dropping; /* are we in dropping state ? */ -}; - -/* FQ_CODEL */ - -enum { - TCA_FQ_CODEL_UNSPEC, - TCA_FQ_CODEL_TARGET, - TCA_FQ_CODEL_LIMIT, - TCA_FQ_CODEL_INTERVAL, - TCA_FQ_CODEL_ECN, - TCA_FQ_CODEL_FLOWS, - TCA_FQ_CODEL_QUANTUM, - __TCA_FQ_CODEL_MAX -}; - -#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) - -enum { - TCA_FQ_CODEL_XSTATS_QDISC, - TCA_FQ_CODEL_XSTATS_CLASS, -}; - -struct tc_fq_codel_qd_stats { - __u32 maxpacket; /* largest packet we've seen so far */ - __u32 drop_overlimit; /* number of time max qdisc - * packet limit was hit - */ - __u32 ecn_mark; /* number of packets we ECN marked - * instead of being dropped - */ - __u32 new_flow_count; /* number of time packets - * created a 'new flow' - */ - __u32 new_flows_len; /* count of flows in new list */ - __u32 old_flows_len; /* count of flows in old list */ -}; - -struct tc_fq_codel_cl_stats { - __s32 deficit; - __u32 ldelay; /* in-queue delay seen by most recently - * dequeued packet - */ - __u32 count; - __u32 lastcount; - __u32 dropping; - __s32 drop_next; -}; - -struct tc_fq_codel_xstats { - __u32 type; - union { - struct tc_fq_codel_qd_stats qdisc_stats; - struct tc_fq_codel_cl_stats class_stats; - }; -}; - -#endif diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 721301b0a908..93d142ad1528 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -12,108 +12,13 @@ #ifndef __PKTCDVD_H #define __PKTCDVD_H -#include - -/* - * 1 for normal debug messages, 2 is very verbose. 0 to turn it off. - */ -#define PACKET_DEBUG 1 - -#define MAX_WRITERS 8 - -#define PKT_RB_POOL_SIZE 512 - -/* - * How long we should hold a non-full packet before starting data gathering. - */ -#define PACKET_WAIT_TIME (HZ * 5 / 1000) - -/* - * use drive write caching -- we need deferred error handling to be - * able to successfully recover with this option (drive will return good - * status as soon as the cdb is validated). - */ -#if defined(CONFIG_CDROM_PKTCDVD_WCACHE) -#define USE_WCACHING 1 -#else -#define USE_WCACHING 0 -#endif - -/* - * No user-servicable parts beyond this point -> - */ - -/* - * device types - */ -#define PACKET_CDR 1 -#define PACKET_CDRW 2 -#define PACKET_DVDR 3 -#define PACKET_DVDRW 4 - -/* - * flags - */ -#define PACKET_WRITABLE 1 /* pd is writable */ -#define PACKET_NWA_VALID 2 /* next writable address valid */ -#define PACKET_LRA_VALID 3 /* last recorded address valid */ -#define PACKET_MERGE_SEGS 4 /* perform segment merging to keep */ - /* underlying cdrom device happy */ - -/* - * Disc status -- from READ_DISC_INFO - */ -#define PACKET_DISC_EMPTY 0 -#define PACKET_DISC_INCOMPLETE 1 -#define PACKET_DISC_COMPLETE 2 -#define PACKET_DISC_OTHER 3 - -/* - * write type, and corresponding data block type - */ -#define PACKET_MODE1 1 -#define PACKET_MODE2 2 -#define PACKET_BLOCK_MODE1 8 -#define PACKET_BLOCK_MODE2 10 - -/* - * Last session/border status - */ -#define PACKET_SESSION_EMPTY 0 -#define PACKET_SESSION_INCOMPLETE 1 -#define PACKET_SESSION_RESERVED 2 -#define PACKET_SESSION_COMPLETE 3 - -#define PACKET_MCN "4a656e734178626f65323030300000" - -#undef PACKET_USE_LS - -#define PKT_CTRL_CMD_SETUP 0 -#define PKT_CTRL_CMD_TEARDOWN 1 -#define PKT_CTRL_CMD_STATUS 2 - -struct pkt_ctrl_command { - __u32 command; /* in: Setup, teardown, status */ - __u32 dev_index; /* in/out: Device index */ - __u32 dev; /* in/out: Device nr for cdrw device */ - __u32 pkt_dev; /* in/out: Device nr for packet device */ - __u32 num_devices; /* out: Largest device index + 1 */ - __u32 padding; /* Not used */ -}; - -/* - * packet ioctls - */ -#define PACKET_IOCTL_MAGIC ('X') -#define PACKET_CTRL_CMD _IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command) - -#ifdef __KERNEL__ #include #include #include #include #include #include +#include /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 @@ -297,6 +202,4 @@ struct pktcdvd_device struct dentry *dfs_f_info; /* debugfs: info file */ }; -#endif /* __KERNEL__ */ - #endif /* __PKTCDVD_H */ diff --git a/include/linux/pmu.h b/include/linux/pmu.h index 84e6a55a1202..99b400b8a241 100644 --- a/include/linux/pmu.h +++ b/include/linux/pmu.h @@ -5,137 +5,11 @@ * * Copyright (C) 1998 Paul Mackerras. */ - #ifndef _LINUX_PMU_H #define _LINUX_PMU_H -#define PMU_DRIVER_VERSION 2 - -/* - * PMU commands - */ -#define PMU_POWER_CTRL0 0x10 /* control power of some devices */ -#define PMU_POWER_CTRL 0x11 /* control power of some devices */ -#define PMU_ADB_CMD 0x20 /* send ADB packet */ -#define PMU_ADB_POLL_OFF 0x21 /* disable ADB auto-poll */ -#define PMU_WRITE_NVRAM 0x33 /* write non-volatile RAM */ -#define PMU_READ_NVRAM 0x3b /* read non-volatile RAM */ -#define PMU_SET_RTC 0x30 /* set real-time clock */ -#define PMU_READ_RTC 0x38 /* read real-time clock */ -#define PMU_SET_VOLBUTTON 0x40 /* set volume up/down position */ -#define PMU_BACKLIGHT_BRIGHT 0x41 /* set backlight brightness */ -#define PMU_GET_VOLBUTTON 0x48 /* get volume up/down position */ -#define PMU_PCEJECT 0x4c /* eject PC-card from slot */ -#define PMU_BATTERY_STATE 0x6b /* report battery state etc. */ -#define PMU_SMART_BATTERY_STATE 0x6f /* report battery state (new way) */ -#define PMU_SET_INTR_MASK 0x70 /* set PMU interrupt mask */ -#define PMU_INT_ACK 0x78 /* read interrupt bits */ -#define PMU_SHUTDOWN 0x7e /* turn power off */ -#define PMU_CPU_SPEED 0x7d /* control CPU speed on some models */ -#define PMU_SLEEP 0x7f /* put CPU to sleep */ -#define PMU_POWER_EVENTS 0x8f /* Send power-event commands to PMU */ -#define PMU_I2C_CMD 0x9a /* I2C operations */ -#define PMU_RESET 0xd0 /* reset CPU */ -#define PMU_GET_BRIGHTBUTTON 0xd9 /* report brightness up/down pos */ -#define PMU_GET_COVER 0xdc /* report cover open/closed */ -#define PMU_SYSTEM_READY 0xdf /* tell PMU we are awake */ -#define PMU_GET_VERSION 0xea /* read the PMU version */ - -/* Bits to use with the PMU_POWER_CTRL0 command */ -#define PMU_POW0_ON 0x80 /* OR this to power ON the device */ -#define PMU_POW0_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ -#define PMU_POW0_HARD_DRIVE 0x04 /* Hard drive power (on wallstreet/lombard ?) */ - -/* Bits to use with the PMU_POWER_CTRL command */ -#define PMU_POW_ON 0x80 /* OR this to power ON the device */ -#define PMU_POW_OFF 0x00 /* leave bit 7 to 0 to power it OFF */ -#define PMU_POW_BACKLIGHT 0x01 /* backlight power */ -#define PMU_POW_CHARGER 0x02 /* battery charger power */ -#define PMU_POW_IRLED 0x04 /* IR led power (on wallstreet) */ -#define PMU_POW_MEDIABAY 0x08 /* media bay power (wallstreet/lombard ?) */ - -/* Bits in PMU interrupt and interrupt mask bytes */ -#define PMU_INT_PCEJECT 0x04 /* PC-card eject buttons */ -#define PMU_INT_SNDBRT 0x08 /* sound/brightness up/down buttons */ -#define PMU_INT_ADB 0x10 /* ADB autopoll or reply data */ -#define PMU_INT_BATTERY 0x20 /* Battery state change */ -#define PMU_INT_ENVIRONMENT 0x40 /* Environment interrupts */ -#define PMU_INT_TICK 0x80 /* 1-second tick interrupt */ - -/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */ -#define PMU_INT_ADB_AUTO 0x04 /* ADB autopoll, when PMU_INT_ADB */ -#define PMU_INT_WAITING_CHARGER 0x01 /* ??? */ -#define PMU_INT_AUTO_SRQ_POLL 0x02 /* ??? */ - -/* Bits in the environement message (either obtained via PMU_GET_COVER, - * or via PMU_INT_ENVIRONMENT on core99 */ -#define PMU_ENV_LID_CLOSED 0x01 /* The lid is closed */ - -/* I2C related definitions */ -#define PMU_I2C_MODE_SIMPLE 0 -#define PMU_I2C_MODE_STDSUB 1 -#define PMU_I2C_MODE_COMBINED 2 - -#define PMU_I2C_BUS_STATUS 0 -#define PMU_I2C_BUS_SYSCLK 1 -#define PMU_I2C_BUS_POWER 2 - -#define PMU_I2C_STATUS_OK 0 -#define PMU_I2C_STATUS_DATAREAD 1 -#define PMU_I2C_STATUS_BUSY 0xfe - - -/* Kind of PMU (model) */ -enum { - PMU_UNKNOWN, - PMU_OHARE_BASED, /* 2400, 3400, 3500 (old G3 powerbook) */ - PMU_HEATHROW_BASED, /* PowerBook G3 series */ - PMU_PADDINGTON_BASED, /* 1999 PowerBook G3 */ - PMU_KEYLARGO_BASED, /* Core99 motherboard (PMU99) */ - PMU_68K_V1, /* 68K PMU, version 1 */ - PMU_68K_V2, /* 68K PMU, version 2 */ -}; +#include -/* PMU PMU_POWER_EVENTS commands */ -enum { - PMU_PWR_GET_POWERUP_EVENTS = 0x00, - PMU_PWR_SET_POWERUP_EVENTS = 0x01, - PMU_PWR_CLR_POWERUP_EVENTS = 0x02, - PMU_PWR_GET_WAKEUP_EVENTS = 0x03, - PMU_PWR_SET_WAKEUP_EVENTS = 0x04, - PMU_PWR_CLR_WAKEUP_EVENTS = 0x05, -}; - -/* Power events wakeup bits */ -enum { - PMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ - PMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ - PMU_PWR_WAKEUP_AC_CHANGE = 0x04, - PMU_PWR_WAKEUP_LID_OPEN = 0x08, - PMU_PWR_WAKEUP_RING = 0x10, -}; - -/* - * Ioctl commands for the /dev/pmu device - */ -#include - -/* no param */ -#define PMU_IOC_SLEEP _IO('B', 0) -/* out param: u32* backlight value: 0 to 15 */ -#define PMU_IOC_GET_BACKLIGHT _IOR('B', 1, size_t) -/* in param: u32 backlight value: 0 to 15 */ -#define PMU_IOC_SET_BACKLIGHT _IOW('B', 2, size_t) -/* out param: u32* PMU model */ -#define PMU_IOC_GET_MODEL _IOR('B', 3, size_t) -/* out param: u32* has_adb: 0 or 1 */ -#define PMU_IOC_HAS_ADB _IOR('B', 4, size_t) -/* out param: u32* can_sleep: 0 or 1 */ -#define PMU_IOC_CAN_SLEEP _IOR('B', 5, size_t) -/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */ -#define PMU_IOC_GRAB_BACKLIGHT _IOR('B', 6, size_t) - -#ifdef __KERNEL__ extern int find_via_pmu(void); @@ -208,6 +82,4 @@ extern int pmu_sys_suspended; #define pmu_sys_suspended 0 #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_PMU_H */ diff --git a/include/linux/poll.h b/include/linux/poll.h index 48fe8bc398d1..c08386fb3e08 100644 --- a/include/linux/poll.h +++ b/include/linux/poll.h @@ -1,9 +1,6 @@ #ifndef _LINUX_POLL_H #define _LINUX_POLL_H -#include - -#ifdef __KERNEL__ #include #include @@ -12,6 +9,7 @@ #include #include #include +#include extern struct ctl_table epoll_table[]; /* for sysctl */ /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating @@ -163,6 +161,4 @@ extern int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp, extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec); -#endif /* KERNEL */ - #endif /* _LINUX_POLL_H */ diff --git a/include/linux/posix_types.h b/include/linux/posix_types.h deleted file mode 100644 index 988f76e636e3..000000000000 --- a/include/linux/posix_types.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _LINUX_POSIX_TYPES_H -#define _LINUX_POSIX_TYPES_H - -#include - -/* - * This allows for 1024 file descriptors: if NR_OPEN is ever grown - * beyond that you'll have to change this too. But 1024 fd's seem to be - * enough even for such "real" unices like OSF/1, so hopefully this is - * one limit that doesn't have to be changed [again]. - * - * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in - * (and thus ) - but this is a more logical - * place for them. Solved by having dummy defines in . - */ - -/* - * This macro may have been defined in . But we always - * use the one here. - */ -#undef __FD_SETSIZE -#define __FD_SETSIZE 1024 - -typedef struct { - unsigned long fds_bits[__FD_SETSIZE / (8 * sizeof(long))]; -} __kernel_fd_set; - -/* Type of a signal handler. */ -typedef void (*__kernel_sighandler_t)(int); - -/* Type of a SYSV IPC key. */ -typedef int __kernel_key_t; -typedef int __kernel_mqd_t; - -#include - -#endif /* _LINUX_POSIX_TYPES_H */ diff --git a/include/linux/ppdev.h b/include/linux/ppdev.h deleted file mode 100644 index dc18c5d23ebe..000000000000 --- a/include/linux/ppdev.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/include/linux/ppdev.h - * - * User-space parallel port device driver (header file). - * - * Copyright (C) 1998-9 Tim Waugh - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Added PPGETTIME/PPSETTIME, Fred Barnes, 1999 - * Added PPGETMODES/PPGETMODE/PPGETPHASE, Fred Barnes , 03/01/2001 - */ - -#define PP_IOCTL 'p' - -/* Set mode for read/write (e.g. IEEE1284_MODE_EPP) */ -#define PPSETMODE _IOW(PP_IOCTL, 0x80, int) - -/* Read status */ -#define PPRSTATUS _IOR(PP_IOCTL, 0x81, unsigned char) -#define PPWSTATUS OBSOLETE__IOW(PP_IOCTL, 0x82, unsigned char) - -/* Read/write control */ -#define PPRCONTROL _IOR(PP_IOCTL, 0x83, unsigned char) -#define PPWCONTROL _IOW(PP_IOCTL, 0x84, unsigned char) - -struct ppdev_frob_struct { - unsigned char mask; - unsigned char val; -}; -#define PPFCONTROL _IOW(PP_IOCTL, 0x8e, struct ppdev_frob_struct) - -/* Read/write data */ -#define PPRDATA _IOR(PP_IOCTL, 0x85, unsigned char) -#define PPWDATA _IOW(PP_IOCTL, 0x86, unsigned char) - -/* Read/write econtrol (not used) */ -#define PPRECONTROL OBSOLETE__IOR(PP_IOCTL, 0x87, unsigned char) -#define PPWECONTROL OBSOLETE__IOW(PP_IOCTL, 0x88, unsigned char) - -/* Read/write FIFO (not used) */ -#define PPRFIFO OBSOLETE__IOR(PP_IOCTL, 0x89, unsigned char) -#define PPWFIFO OBSOLETE__IOW(PP_IOCTL, 0x8a, unsigned char) - -/* Claim the port to start using it */ -#define PPCLAIM _IO(PP_IOCTL, 0x8b) - -/* Release the port when you aren't using it */ -#define PPRELEASE _IO(PP_IOCTL, 0x8c) - -/* Yield the port (release it if another driver is waiting, - * then reclaim) */ -#define PPYIELD _IO(PP_IOCTL, 0x8d) - -/* Register device exclusively (must be before PPCLAIM). */ -#define PPEXCL _IO(PP_IOCTL, 0x8f) - -/* Data line direction: non-zero for input mode. */ -#define PPDATADIR _IOW(PP_IOCTL, 0x90, int) - -/* Negotiate a particular IEEE 1284 mode. */ -#define PPNEGOT _IOW(PP_IOCTL, 0x91, int) - -/* Set control lines when an interrupt occurs. */ -#define PPWCTLONIRQ _IOW(PP_IOCTL, 0x92, unsigned char) - -/* Clear (and return) interrupt count. */ -#define PPCLRIRQ _IOR(PP_IOCTL, 0x93, int) - -/* Set the IEEE 1284 phase that we're in (e.g. IEEE1284_PH_FWD_IDLE) */ -#define PPSETPHASE _IOW(PP_IOCTL, 0x94, int) - -/* Set and get port timeout (struct timeval's) */ -#define PPGETTIME _IOR(PP_IOCTL, 0x95, struct timeval) -#define PPSETTIME _IOW(PP_IOCTL, 0x96, struct timeval) - -/* Get available modes (what the hardware can do) */ -#define PPGETMODES _IOR(PP_IOCTL, 0x97, unsigned int) - -/* Get the current mode and phaze */ -#define PPGETMODE _IOR(PP_IOCTL, 0x98, int) -#define PPGETPHASE _IOR(PP_IOCTL, 0x99, int) - -/* get/set flags */ -#define PPGETFLAGS _IOR(PP_IOCTL, 0x9a, int) -#define PPSETFLAGS _IOW(PP_IOCTL, 0x9b, int) - -/* flags visible to the world */ -#define PP_FASTWRITE (1<<2) -#define PP_FASTREAD (1<<3) -#define PP_W91284PIC (1<<4) - -/* only masks user-visible flags */ -#define PP_FLAGMASK (PP_FASTWRITE | PP_FASTREAD | PP_W91284PIC) - - diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h index b7dc06f7f1d1..4ea1d377e1ad 100644 --- a/include/linux/ppp-comp.h +++ b/include/linux/ppp-comp.h @@ -10,7 +10,8 @@ #ifndef _NET_PPP_COMP_H #define _NET_PPP_COMP_H -#ifdef __KERNEL__ +#include + struct module; @@ -100,89 +101,6 @@ struct compressor { #define DECOMP_ERROR -1 /* error detected before decomp. */ #define DECOMP_FATALERROR -2 /* error detected after decomp. */ -#endif /* __KERNEL__ */ - -/* - * CCP codes. - */ - -#define CCP_CONFREQ 1 -#define CCP_CONFACK 2 -#define CCP_TERMREQ 5 -#define CCP_TERMACK 6 -#define CCP_RESETREQ 14 -#define CCP_RESETACK 15 - -/* - * Max # bytes for a CCP option - */ - -#define CCP_MAX_OPTION_LENGTH 32 - -/* - * Parts of a CCP packet. - */ - -#define CCP_CODE(dp) ((dp)[0]) -#define CCP_ID(dp) ((dp)[1]) -#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3]) -#define CCP_HDRLEN 4 - -#define CCP_OPT_CODE(dp) ((dp)[0]) -#define CCP_OPT_LENGTH(dp) ((dp)[1]) -#define CCP_OPT_MINLEN 2 - -/* - * Definitions for BSD-Compress. - */ - -#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */ -#define CILEN_BSD_COMPRESS 3 /* length of config. option */ - -/* Macros for handling the 3rd byte of the BSD-Compress config option. */ -#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */ -#define BSD_VERSION(x) ((x) >> 5) /* version of option format */ -#define BSD_CURRENT_VERSION 1 /* current version number */ -#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n)) - -#define BSD_MIN_BITS 9 /* smallest code size supported */ -#define BSD_MAX_BITS 15 /* largest code size supported */ - -/* - * Definitions for Deflate. - */ - -#define CI_DEFLATE 26 /* config option for Deflate */ -#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */ -#define CILEN_DEFLATE 4 /* length of its config option */ - -#define DEFLATE_MIN_SIZE 9 -#define DEFLATE_MAX_SIZE 15 -#define DEFLATE_METHOD_VAL 8 -#define DEFLATE_SIZE(x) (((x) >> 4) + 8) -#define DEFLATE_METHOD(x) ((x) & 0x0F) -#define DEFLATE_MAKE_OPT(w) ((((w) - 8) << 4) + DEFLATE_METHOD_VAL) -#define DEFLATE_CHK_SEQUENCE 0 - -/* - * Definitions for MPPE. - */ - -#define CI_MPPE 18 /* config option for MPPE */ -#define CILEN_MPPE 6 /* length of config option */ - -/* - * Definitions for other, as yet unsupported, compression methods. - */ - -#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */ -#define CILEN_PREDICTOR_1 2 /* length of its config option */ -#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */ -#define CILEN_PREDICTOR_2 2 /* length of its config option */ - -#ifdef __KERNEL__ extern int ppp_register_compressor(struct compressor *); extern void ppp_unregister_compressor(struct compressor *); -#endif /* __KERNEL__ */ - #endif /* _NET_PPP_COMP_H */ diff --git a/include/linux/ppp-ioctl.h b/include/linux/ppp-ioctl.h deleted file mode 100644 index 2d9a8859550a..000000000000 --- a/include/linux/ppp-ioctl.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * ppp-ioctl.h - PPP ioctl definitions. - * - * Copyright 1999-2002 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - */ -#ifndef _PPP_IOCTL_H -#define _PPP_IOCTL_H - -#include -#include - -/* - * Bit definitions for flags argument to PPPIOCGFLAGS/PPPIOCSFLAGS. - */ -#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */ -#define SC_COMP_AC 0x00000002 /* header compression (output) */ -#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */ -#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */ -#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */ -#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */ -#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */ -#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */ -#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */ -#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */ -#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */ -#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */ -#define SC_COMP_RUN 0x00001000 /* compressor has been inited */ -#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */ -#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */ -#define SC_DEBUG 0x00010000 /* enable debug messages */ -#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */ -#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */ -#define SC_LOG_RAWIN 0x00080000 /* log all chars received */ -#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */ -#define SC_SYNC 0x00200000 /* synchronous serial mode */ -#define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */ -#define SC_MASK 0x0f600fff /* bits that user can change */ - -/* state bits */ -#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */ -#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */ -#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */ -#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */ -#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */ -#define SC_DC_FERROR 0x00800000 /* fatal decomp error detected */ -#define SC_DC_ERROR 0x00400000 /* non-fatal decomp error detected */ - -/* Used with PPPIOCGNPMODE/PPPIOCSNPMODE */ -struct npioctl { - int protocol; /* PPP protocol, e.g. PPP_IP */ - enum NPmode mode; -}; - -/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */ -struct ppp_option_data { - __u8 __user *ptr; - __u32 length; - int transmit; -}; - -/* For PPPIOCGL2TPSTATS */ -struct pppol2tp_ioc_stats { - __u16 tunnel_id; /* redundant */ - __u16 session_id; /* if zero, get tunnel stats */ - __u32 using_ipsec:1; /* valid only for session_id == 0 */ - __aligned_u64 tx_packets; - __aligned_u64 tx_bytes; - __aligned_u64 tx_errors; - __aligned_u64 rx_packets; - __aligned_u64 rx_bytes; - __aligned_u64 rx_seq_discards; - __aligned_u64 rx_oos_packets; - __aligned_u64 rx_errors; -}; - -/* - * Ioctl definitions. - */ - -#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */ -#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */ -#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */ -#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */ -#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */ -#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */ -#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */ -#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */ -#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */ -#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */ -#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */ -#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */ -#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */ -#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data) -#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */ -#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */ -#define PPPIOCSPASS _IOW('t', 71, struct sock_fprog) /* set pass filter */ -#define PPPIOCSACTIVE _IOW('t', 70, struct sock_fprog) /* set active filt */ -#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */ -#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */ -#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */ -#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */ -#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */ -#define PPPIOCDETACH _IOW('t', 60, int) /* detach from ppp unit/chan */ -#define PPPIOCSMRRU _IOW('t', 59, int) /* set multilink MRU */ -#define PPPIOCCONNECT _IOW('t', 58, int) /* connect channel to unit */ -#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */ -#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */ -#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */ -#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats) - -#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0) -#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */ -#define SIOCGPPPCSTATS (SIOCDEVPRIVATE + 2) - -#endif /* _PPP_IOCTL_H */ diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h index ba416f67eb62..28aa0237c8c3 100644 --- a/include/linux/ppp_defs.h +++ b/include/linux/ppp_defs.h @@ -7,148 +7,11 @@ * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. */ -#include - #ifndef _PPP_DEFS_H_ #define _PPP_DEFS_H_ -/* - * The basic PPP frame. - */ -#define PPP_HDRLEN 4 /* octets for standard ppp header */ -#define PPP_FCSLEN 2 /* octets for FCS */ -#define PPP_MRU 1500 /* default MRU = max length of info field */ - -#define PPP_ADDRESS(p) (((__u8 *)(p))[0]) -#define PPP_CONTROL(p) (((__u8 *)(p))[1]) -#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3]) - -/* - * Significant octet values. - */ -#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */ -#define PPP_UI 0x03 /* Unnumbered Information */ -#define PPP_FLAG 0x7e /* Flag Sequence */ -#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */ -#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */ - -/* - * Protocol field values. - */ -#define PPP_IP 0x21 /* Internet Protocol */ -#define PPP_AT 0x29 /* AppleTalk Protocol */ -#define PPP_IPX 0x2b /* IPX protocol */ -#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */ -#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */ -#define PPP_MP 0x3d /* Multilink protocol */ -#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */ -#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */ -#define PPP_COMP 0xfd /* compressed packet */ -#define PPP_MPLS_UC 0x0281 /* Multi Protocol Label Switching - Unicast */ -#define PPP_MPLS_MC 0x0283 /* Multi Protocol Label Switching - Multicast */ -#define PPP_IPCP 0x8021 /* IP Control Protocol */ -#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */ -#define PPP_IPXCP 0x802b /* IPX Control Protocol */ -#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */ -#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */ -#define PPP_CCP 0x80fd /* Compression Control Protocol */ -#define PPP_MPLSCP 0x80fd /* MPLS Control Protocol */ -#define PPP_LCP 0xc021 /* Link Control Protocol */ -#define PPP_PAP 0xc023 /* Password Authentication Protocol */ -#define PPP_LQR 0xc025 /* Link Quality Report protocol */ -#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */ -#define PPP_CBCP 0xc029 /* Callback Control Protocol */ - -/* - * Values for FCS calculations. - */ - -#define PPP_INITFCS 0xffff /* Initial FCS value */ -#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */ - -#ifdef __KERNEL__ #include -#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c) -#endif - -/* - * Extended asyncmap - allows any character to be escaped. - */ - -typedef __u32 ext_accm[8]; - -/* - * What to do with network protocol (NP) packets. - */ -enum NPmode { - NPMODE_PASS, /* pass the packet through */ - NPMODE_DROP, /* silently drop the packet */ - NPMODE_ERROR, /* return an error */ - NPMODE_QUEUE /* save it up for later. */ -}; - -/* - * Statistics for LQRP and pppstats - */ -struct pppstat { - __u32 ppp_discards; /* # frames discarded */ - - __u32 ppp_ibytes; /* bytes received */ - __u32 ppp_ioctects; /* bytes received not in error */ - __u32 ppp_ipackets; /* packets received */ - __u32 ppp_ierrors; /* receive errors */ - __u32 ppp_ilqrs; /* # LQR frames received */ - - __u32 ppp_obytes; /* raw bytes sent */ - __u32 ppp_ooctects; /* frame bytes sent */ - __u32 ppp_opackets; /* packets sent */ - __u32 ppp_oerrors; /* transmit errors */ - __u32 ppp_olqrs; /* # LQR frames sent */ -}; - -struct vjstat { - __u32 vjs_packets; /* outbound packets */ - __u32 vjs_compressed; /* outbound compressed packets */ - __u32 vjs_searches; /* searches for connection state */ - __u32 vjs_misses; /* times couldn't find conn. state */ - __u32 vjs_uncompressedin; /* inbound uncompressed packets */ - __u32 vjs_compressedin; /* inbound compressed packets */ - __u32 vjs_errorin; /* inbound unknown type packets */ - __u32 vjs_tossed; /* inbound packets tossed because of error */ -}; - -struct compstat { - __u32 unc_bytes; /* total uncompressed bytes */ - __u32 unc_packets; /* total uncompressed packets */ - __u32 comp_bytes; /* compressed bytes */ - __u32 comp_packets; /* compressed packets */ - __u32 inc_bytes; /* incompressible bytes */ - __u32 inc_packets; /* incompressible packets */ - - /* the compression ratio is defined as in_count / bytes_out */ - __u32 in_count; /* Bytes received */ - __u32 bytes_out; /* Bytes transmitted */ - - double ratio; /* not computed in kernel. */ -}; - -struct ppp_stats { - struct pppstat p; /* basic PPP statistics */ - struct vjstat vj; /* VJ header compression statistics */ -}; - -struct ppp_comp_stats { - struct compstat c; /* packet compression statistics */ - struct compstat d; /* packet decompression statistics */ -}; - -/* - * The following structure records the time in seconds since - * the last NP packet was sent or received. - */ -struct ppp_idle { - __kernel_time_t xmit_idle; /* time since last NP packet sent */ - __kernel_time_t recv_idle; /* time since last NP packet received */ -}; +#include +#define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c) #endif /* _PPP_DEFS_H_ */ diff --git a/include/linux/pps.h b/include/linux/pps.h deleted file mode 100644 index a9bb1d93451a..000000000000 --- a/include/linux/pps.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * PPS API header - * - * Copyright (C) 2005-2009 Rodolfo Giometti - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _PPS_H_ -#define _PPS_H_ - -#include - -#define PPS_VERSION "5.3.6" -#define PPS_MAX_SOURCES 16 /* should be enough... */ - -/* Implementation note: the logical states ``assert'' and ``clear'' - * are implemented in terms of the chip register, i.e. ``assert'' - * means the bit is set. */ - -/* - * 3.2 New data structures - */ - -#define PPS_API_VERS_1 1 -#define PPS_API_VERS PPS_API_VERS_1 /* we use API version 1 */ -#define PPS_MAX_NAME_LEN 32 - -/* 32-bit vs. 64-bit compatibility. - * - * 0n i386, the alignment of a uint64_t is only 4 bytes, while on most other - * architectures it's 8 bytes. On i386, there will be no padding between the - * two consecutive 'struct pps_ktime' members of struct pps_kinfo and struct - * pps_kparams. But on most platforms there will be padding to ensure correct - * alignment. - * - * The simple fix is probably to add an explicit padding. - * [David Woodhouse] - */ -struct pps_ktime { - __s64 sec; - __s32 nsec; - __u32 flags; -}; -#define PPS_TIME_INVALID (1<<0) /* used to specify timeout==NULL */ - -struct pps_kinfo { - __u32 assert_sequence; /* seq. num. of assert event */ - __u32 clear_sequence; /* seq. num. of clear event */ - struct pps_ktime assert_tu; /* time of assert event */ - struct pps_ktime clear_tu; /* time of clear event */ - int current_mode; /* current mode bits */ -}; - -struct pps_kparams { - int api_version; /* API version # */ - int mode; /* mode bits */ - struct pps_ktime assert_off_tu; /* offset compensation for assert */ - struct pps_ktime clear_off_tu; /* offset compensation for clear */ -}; - -/* - * 3.3 Mode bit definitions - */ - -/* Device/implementation parameters */ -#define PPS_CAPTUREASSERT 0x01 /* capture assert events */ -#define PPS_CAPTURECLEAR 0x02 /* capture clear events */ -#define PPS_CAPTUREBOTH 0x03 /* capture assert and clear events */ - -#define PPS_OFFSETASSERT 0x10 /* apply compensation for assert ev. */ -#define PPS_OFFSETCLEAR 0x20 /* apply compensation for clear ev. */ - -#define PPS_CANWAIT 0x100 /* can we wait for an event? */ -#define PPS_CANPOLL 0x200 /* bit reserved for future use */ - -/* Kernel actions */ -#define PPS_ECHOASSERT 0x40 /* feed back assert event to output */ -#define PPS_ECHOCLEAR 0x80 /* feed back clear event to output */ - -/* Timestamp formats */ -#define PPS_TSFMT_TSPEC 0x1000 /* select timespec format */ -#define PPS_TSFMT_NTPFP 0x2000 /* select NTP format */ - -/* - * 3.4.4 New functions: disciplining the kernel timebase - */ - -/* Kernel consumers */ -#define PPS_KC_HARDPPS 0 /* hardpps() (or equivalent) */ -#define PPS_KC_HARDPPS_PLL 1 /* hardpps() constrained to - use a phase-locked loop */ -#define PPS_KC_HARDPPS_FLL 2 /* hardpps() constrained to - use a frequency-locked loop */ -/* - * Here begins the implementation-specific part! - */ - -struct pps_fdata { - struct pps_kinfo info; - struct pps_ktime timeout; -}; - -struct pps_bind_args { - int tsformat; /* format of time stamps */ - int edge; /* selected event type */ - int consumer; /* selected kernel consumer */ -}; - -#include - -#define PPS_GETPARAMS _IOR('p', 0xa1, struct pps_kparams *) -#define PPS_SETPARAMS _IOW('p', 0xa2, struct pps_kparams *) -#define PPS_GETCAP _IOR('p', 0xa3, int *) -#define PPS_FETCH _IOWR('p', 0xa4, struct pps_fdata *) -#define PPS_KC_BIND _IOW('p', 0xa5, struct pps_bind_args *) - -#endif /* _PPS_H_ */ diff --git a/include/linux/prctl.h b/include/linux/prctl.h deleted file mode 100644 index 289760f424aa..000000000000 --- a/include/linux/prctl.h +++ /dev/null @@ -1,152 +0,0 @@ -#ifndef _LINUX_PRCTL_H -#define _LINUX_PRCTL_H - -/* Values to pass as first argument to prctl() */ - -#define PR_SET_PDEATHSIG 1 /* Second arg is a signal */ -#define PR_GET_PDEATHSIG 2 /* Second arg is a ptr to return the signal */ - -/* Get/set current->mm->dumpable */ -#define PR_GET_DUMPABLE 3 -#define PR_SET_DUMPABLE 4 - -/* Get/set unaligned access control bits (if meaningful) */ -#define PR_GET_UNALIGN 5 -#define PR_SET_UNALIGN 6 -# define PR_UNALIGN_NOPRINT 1 /* silently fix up unaligned user accesses */ -# define PR_UNALIGN_SIGBUS 2 /* generate SIGBUS on unaligned user access */ - -/* Get/set whether or not to drop capabilities on setuid() away from - * uid 0 (as per security/commoncap.c) */ -#define PR_GET_KEEPCAPS 7 -#define PR_SET_KEEPCAPS 8 - -/* Get/set floating-point emulation control bits (if meaningful) */ -#define PR_GET_FPEMU 9 -#define PR_SET_FPEMU 10 -# define PR_FPEMU_NOPRINT 1 /* silently emulate fp operations accesses */ -# define PR_FPEMU_SIGFPE 2 /* don't emulate fp operations, send SIGFPE instead */ - -/* Get/set floating-point exception mode (if meaningful) */ -#define PR_GET_FPEXC 11 -#define PR_SET_FPEXC 12 -# define PR_FP_EXC_SW_ENABLE 0x80 /* Use FPEXC for FP exception enables */ -# define PR_FP_EXC_DIV 0x010000 /* floating point divide by zero */ -# define PR_FP_EXC_OVF 0x020000 /* floating point overflow */ -# define PR_FP_EXC_UND 0x040000 /* floating point underflow */ -# define PR_FP_EXC_RES 0x080000 /* floating point inexact result */ -# define PR_FP_EXC_INV 0x100000 /* floating point invalid operation */ -# define PR_FP_EXC_DISABLED 0 /* FP exceptions disabled */ -# define PR_FP_EXC_NONRECOV 1 /* async non-recoverable exc. mode */ -# define PR_FP_EXC_ASYNC 2 /* async recoverable exception mode */ -# define PR_FP_EXC_PRECISE 3 /* precise exception mode */ - -/* Get/set whether we use statistical process timing or accurate timestamp - * based process timing */ -#define PR_GET_TIMING 13 -#define PR_SET_TIMING 14 -# define PR_TIMING_STATISTICAL 0 /* Normal, traditional, - statistical process timing */ -# define PR_TIMING_TIMESTAMP 1 /* Accurate timestamp based - process timing */ - -#define PR_SET_NAME 15 /* Set process name */ -#define PR_GET_NAME 16 /* Get process name */ - -/* Get/set process endian */ -#define PR_GET_ENDIAN 19 -#define PR_SET_ENDIAN 20 -# define PR_ENDIAN_BIG 0 -# define PR_ENDIAN_LITTLE 1 /* True little endian mode */ -# define PR_ENDIAN_PPC_LITTLE 2 /* "PowerPC" pseudo little endian */ - -/* Get/set process seccomp mode */ -#define PR_GET_SECCOMP 21 -#define PR_SET_SECCOMP 22 - -/* Get/set the capability bounding set (as per security/commoncap.c) */ -#define PR_CAPBSET_READ 23 -#define PR_CAPBSET_DROP 24 - -/* Get/set the process' ability to use the timestamp counter instruction */ -#define PR_GET_TSC 25 -#define PR_SET_TSC 26 -# define PR_TSC_ENABLE 1 /* allow the use of the timestamp counter */ -# define PR_TSC_SIGSEGV 2 /* throw a SIGSEGV instead of reading the TSC */ - -/* Get/set securebits (as per security/commoncap.c) */ -#define PR_GET_SECUREBITS 27 -#define PR_SET_SECUREBITS 28 - -/* - * Get/set the timerslack as used by poll/select/nanosleep - * A value of 0 means "use default" - */ -#define PR_SET_TIMERSLACK 29 -#define PR_GET_TIMERSLACK 30 - -#define PR_TASK_PERF_EVENTS_DISABLE 31 -#define PR_TASK_PERF_EVENTS_ENABLE 32 - -/* - * Set early/late kill mode for hwpoison memory corruption. - * This influences when the process gets killed on a memory corruption. - */ -#define PR_MCE_KILL 33 -# define PR_MCE_KILL_CLEAR 0 -# define PR_MCE_KILL_SET 1 - -# define PR_MCE_KILL_LATE 0 -# define PR_MCE_KILL_EARLY 1 -# define PR_MCE_KILL_DEFAULT 2 - -#define PR_MCE_KILL_GET 34 - -/* - * Tune up process memory map specifics. - */ -#define PR_SET_MM 35 -# define PR_SET_MM_START_CODE 1 -# define PR_SET_MM_END_CODE 2 -# define PR_SET_MM_START_DATA 3 -# define PR_SET_MM_END_DATA 4 -# define PR_SET_MM_START_STACK 5 -# define PR_SET_MM_START_BRK 6 -# define PR_SET_MM_BRK 7 -# define PR_SET_MM_ARG_START 8 -# define PR_SET_MM_ARG_END 9 -# define PR_SET_MM_ENV_START 10 -# define PR_SET_MM_ENV_END 11 -# define PR_SET_MM_AUXV 12 -# define PR_SET_MM_EXE_FILE 13 - -/* - * Set specific pid that is allowed to ptrace the current task. - * A value of 0 mean "no process". - */ -#define PR_SET_PTRACER 0x59616d61 -# define PR_SET_PTRACER_ANY ((unsigned long)-1) - -#define PR_SET_CHILD_SUBREAPER 36 -#define PR_GET_CHILD_SUBREAPER 37 - -/* - * If no_new_privs is set, then operations that grant new privileges (i.e. - * execve) will either fail or not grant them. This affects suid/sgid, - * file capabilities, and LSMs. - * - * Operations that merely manipulate or drop existing privileges (setresuid, - * capset, etc.) will still work. Drop those privileges if you want them gone. - * - * Changing LSM security domain is considered a new privilege. So, for example, - * asking selinux for a specific new context (e.g. with runcon) will result - * in execve returning -EPERM. - * - * See Documentation/prctl/no_new_privs.txt for more details. - */ -#define PR_SET_NO_NEW_PRIVS 38 -#define PR_GET_NO_NEW_PRIVS 39 - -#define PR_GET_TID_ADDRESS 40 - -#endif /* _LINUX_PRCTL_H */ diff --git a/include/linux/ptp_clock.h b/include/linux/ptp_clock.h deleted file mode 100644 index 94e981f810a2..000000000000 --- a/include/linux/ptp_clock.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * PTP 1588 clock support - user space interface - * - * Copyright (C) 2010 OMICRON electronics GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _PTP_CLOCK_H_ -#define _PTP_CLOCK_H_ - -#include -#include - -/* PTP_xxx bits, for the flags field within the request structures. */ -#define PTP_ENABLE_FEATURE (1<<0) -#define PTP_RISING_EDGE (1<<1) -#define PTP_FALLING_EDGE (1<<2) - -/* - * struct ptp_clock_time - represents a time value - * - * The sign of the seconds field applies to the whole value. The - * nanoseconds field is always unsigned. The reserved field is - * included for sub-nanosecond resolution, should the demand for - * this ever appear. - * - */ -struct ptp_clock_time { - __s64 sec; /* seconds */ - __u32 nsec; /* nanoseconds */ - __u32 reserved; -}; - -struct ptp_clock_caps { - int max_adj; /* Maximum frequency adjustment in parts per billon. */ - int n_alarm; /* Number of programmable alarms. */ - int n_ext_ts; /* Number of external time stamp channels. */ - int n_per_out; /* Number of programmable periodic signals. */ - int pps; /* Whether the clock supports a PPS callback. */ - int rsv[15]; /* Reserved for future use. */ -}; - -struct ptp_extts_request { - unsigned int index; /* Which channel to configure. */ - unsigned int flags; /* Bit field for PTP_xxx flags. */ - unsigned int rsv[2]; /* Reserved for future use. */ -}; - -struct ptp_perout_request { - struct ptp_clock_time start; /* Absolute start time. */ - struct ptp_clock_time period; /* Desired period, zero means disable. */ - unsigned int index; /* Which channel to configure. */ - unsigned int flags; /* Reserved for future use. */ - unsigned int rsv[4]; /* Reserved for future use. */ -}; - -#define PTP_CLK_MAGIC '=' - -#define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) -#define PTP_EXTTS_REQUEST _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request) -#define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) -#define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) - -struct ptp_extts_event { - struct ptp_clock_time t; /* Time event occured. */ - unsigned int index; /* Which channel produced the event. */ - unsigned int flags; /* Reserved for future use. */ - unsigned int rsv[2]; /* Reserved for future use. */ -}; - -#endif diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index 1d24ffad59c5..e0ff4689d35a 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -1,82 +1,12 @@ #ifndef _LINUX_PTRACE_H #define _LINUX_PTRACE_H -/* ptrace.h */ -/* structs and defines to help the user use the ptrace system call. */ -/* has the defines to get at the registers. */ - -#define PTRACE_TRACEME 0 -#define PTRACE_PEEKTEXT 1 -#define PTRACE_PEEKDATA 2 -#define PTRACE_PEEKUSR 3 -#define PTRACE_POKETEXT 4 -#define PTRACE_POKEDATA 5 -#define PTRACE_POKEUSR 6 -#define PTRACE_CONT 7 -#define PTRACE_KILL 8 -#define PTRACE_SINGLESTEP 9 - -#define PTRACE_ATTACH 16 -#define PTRACE_DETACH 17 - -#define PTRACE_SYSCALL 24 - -/* 0x4200-0x4300 are reserved for architecture-independent additions. */ -#define PTRACE_SETOPTIONS 0x4200 -#define PTRACE_GETEVENTMSG 0x4201 -#define PTRACE_GETSIGINFO 0x4202 -#define PTRACE_SETSIGINFO 0x4203 +#include /* For unlikely. */ +#include /* For struct task_struct. */ +#include /* for IS_ERR_VALUE */ +#include /* For BUG_ON. */ +#include -/* - * Generic ptrace interface that exports the architecture specific regsets - * using the corresponding NT_* types (which are also used in the core dump). - * Please note that the NT_PRSTATUS note type in a core dump contains a full - * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the - * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the - * other user_regset flavors, the user_regset layout and the ELF core dump note - * payload are exactly the same layout. - * - * This interface usage is as follows: - * struct iovec iov = { buf, len}; - * - * ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov); - * - * On the successful completion, iov.len will be updated by the kernel, - * specifying how much the kernel has written/read to/from the user's iov.buf. - */ -#define PTRACE_GETREGSET 0x4204 -#define PTRACE_SETREGSET 0x4205 - -#define PTRACE_SEIZE 0x4206 -#define PTRACE_INTERRUPT 0x4207 -#define PTRACE_LISTEN 0x4208 - -/* Wait extended result codes for the above trace options. */ -#define PTRACE_EVENT_FORK 1 -#define PTRACE_EVENT_VFORK 2 -#define PTRACE_EVENT_CLONE 3 -#define PTRACE_EVENT_EXEC 4 -#define PTRACE_EVENT_VFORK_DONE 5 -#define PTRACE_EVENT_EXIT 6 -#define PTRACE_EVENT_SECCOMP 7 -/* Extended result codes which enabled by means other than options. */ -#define PTRACE_EVENT_STOP 128 - -/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */ -#define PTRACE_O_TRACESYSGOOD 1 -#define PTRACE_O_TRACEFORK (1 << PTRACE_EVENT_FORK) -#define PTRACE_O_TRACEVFORK (1 << PTRACE_EVENT_VFORK) -#define PTRACE_O_TRACECLONE (1 << PTRACE_EVENT_CLONE) -#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC) -#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE) -#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) -#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) - -#define PTRACE_O_MASK 0x000000ff - -#include - -#ifdef __KERNEL__ /* * Ptrace flags * @@ -108,12 +38,6 @@ #define PT_BLOCKSTEP_BIT 30 #define PT_BLOCKSTEP (1< /* For unlikely. */ -#include /* For struct task_struct. */ -#include /* for IS_ERR_VALUE */ -#include /* For BUG_ON. */ - - extern long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len); @@ -416,6 +340,4 @@ extern void ptrace_put_breakpoints(struct task_struct *tsk); static inline void ptrace_put_breakpoints(struct task_struct *tsk) { } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif /* __KERNEL */ - #endif diff --git a/include/linux/qnx4_fs.h b/include/linux/qnx4_fs.h deleted file mode 100644 index 8b9aee1a9ce3..000000000000 --- a/include/linux/qnx4_fs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Name : qnx4_fs.h - * Author : Richard Frowijn - * Function : qnx4 global filesystem definitions - * History : 23-03-1998 created - */ -#ifndef _LINUX_QNX4_FS_H -#define _LINUX_QNX4_FS_H - -#include -#include -#include - -#define QNX4_ROOT_INO 1 - -#define QNX4_MAX_XTNTS_PER_XBLK 60 -/* for di_status */ -#define QNX4_FILE_USED 0x01 -#define QNX4_FILE_MODIFIED 0x02 -#define QNX4_FILE_BUSY 0x04 -#define QNX4_FILE_LINK 0x08 -#define QNX4_FILE_INODE 0x10 -#define QNX4_FILE_FSYSCLEAN 0x20 - -#define QNX4_I_MAP_SLOTS 8 -#define QNX4_Z_MAP_SLOTS 64 -#define QNX4_VALID_FS 0x0001 /* Clean fs. */ -#define QNX4_ERROR_FS 0x0002 /* fs has errors. */ -#define QNX4_BLOCK_SIZE 0x200 /* blocksize of 512 bytes */ -#define QNX4_BLOCK_SIZE_BITS 9 /* blocksize shift */ -#define QNX4_DIR_ENTRY_SIZE 0x040 /* dir entry size of 64 bytes */ -#define QNX4_DIR_ENTRY_SIZE_BITS 6 /* dir entry size shift */ -#define QNX4_XBLK_ENTRY_SIZE 0x200 /* xblk entry size */ -#define QNX4_INODES_PER_BLOCK 0x08 /* 512 / 64 */ - -/* for filenames */ -#define QNX4_SHORT_NAME_MAX 16 -#define QNX4_NAME_MAX 48 - -/* - * This is the original qnx4 inode layout on disk. - */ -struct qnx4_inode_entry { - char di_fname[QNX4_SHORT_NAME_MAX]; - qnx4_off_t di_size; - qnx4_xtnt_t di_first_xtnt; - __le32 di_xblk; - __le32 di_ftime; - __le32 di_mtime; - __le32 di_atime; - __le32 di_ctime; - qnx4_nxtnt_t di_num_xtnts; - qnx4_mode_t di_mode; - qnx4_muid_t di_uid; - qnx4_mgid_t di_gid; - qnx4_nlink_t di_nlink; - __u8 di_zero[4]; - qnx4_ftype_t di_type; - __u8 di_status; -}; - -struct qnx4_link_info { - char dl_fname[QNX4_NAME_MAX]; - __le32 dl_inode_blk; - __u8 dl_inode_ndx; - __u8 dl_spare[10]; - __u8 dl_status; -}; - -struct qnx4_xblk { - __le32 xblk_next_xblk; - __le32 xblk_prev_xblk; - __u8 xblk_num_xtnts; - __u8 xblk_spare[3]; - __le32 xblk_num_blocks; - qnx4_xtnt_t xblk_xtnts[QNX4_MAX_XTNTS_PER_XBLK]; - char xblk_signature[8]; - qnx4_xtnt_t xblk_first_xtnt; -}; - -struct qnx4_super_block { - struct qnx4_inode_entry RootDir; - struct qnx4_inode_entry Inode; - struct qnx4_inode_entry Boot; - struct qnx4_inode_entry AltBoot; -}; - -#endif diff --git a/include/linux/qnxtypes.h b/include/linux/qnxtypes.h deleted file mode 100644 index bebbe5cc4fb8..000000000000 --- a/include/linux/qnxtypes.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Name : qnxtypes.h - * Author : Richard Frowijn - * Function : standard qnx types - * History : 22-03-1998 created - * - */ - -#ifndef _QNX4TYPES_H -#define _QNX4TYPES_H - -#include - -typedef __le16 qnx4_nxtnt_t; -typedef __u8 qnx4_ftype_t; - -typedef struct { - __le32 xtnt_blk; - __le32 xtnt_size; -} qnx4_xtnt_t; - -typedef __le16 qnx4_mode_t; -typedef __le16 qnx4_muid_t; -typedef __le16 qnx4_mgid_t; -typedef __le32 qnx4_off_t; -typedef __le16 qnx4_nlink_t; - -#endif diff --git a/include/linux/quota.h b/include/linux/quota.h index dcd5721e626d..58fdef125252 100644 --- a/include/linux/quota.h +++ b/include/linux/quota.h @@ -29,146 +29,9 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ - #ifndef _LINUX_QUOTA_ #define _LINUX_QUOTA_ -#include -#include - -#define __DQUOT_VERSION__ "dquot_6.5.2" - -#define MAXQUOTAS 2 -#define USRQUOTA 0 /* element used for user quotas */ -#define GRPQUOTA 1 /* element used for group quotas */ - -/* - * Definitions for the default names of the quotas files. - */ -#define INITQFNAMES { \ - "user", /* USRQUOTA */ \ - "group", /* GRPQUOTA */ \ - "undefined", \ -}; - -/* - * Command definitions for the 'quotactl' system call. - * The commands are broken into a main command defined below - * and a subcommand that is used to convey the type of - * quota that is being manipulated (see above). - */ -#define SUBCMDMASK 0x00ff -#define SUBCMDSHIFT 8 -#define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) - -#define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */ -#define Q_QUOTAON 0x800002 /* turn quotas on */ -#define Q_QUOTAOFF 0x800003 /* turn quotas off */ -#define Q_GETFMT 0x800004 /* get quota format used on given filesystem */ -#define Q_GETINFO 0x800005 /* get information about quota files */ -#define Q_SETINFO 0x800006 /* set information about quota files */ -#define Q_GETQUOTA 0x800007 /* get user quota structure */ -#define Q_SETQUOTA 0x800008 /* set user quota structure */ - -/* Quota format type IDs */ -#define QFMT_VFS_OLD 1 -#define QFMT_VFS_V0 2 -#define QFMT_OCFS2 3 -#define QFMT_VFS_V1 4 - -/* Size of block in which space limits are passed through the quota - * interface */ -#define QIF_DQBLKSIZE_BITS 10 -#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS) - -/* - * Quota structure used for communication with userspace via quotactl - * Following flags are used to specify which fields are valid - */ -enum { - QIF_BLIMITS_B = 0, - QIF_SPACE_B, - QIF_ILIMITS_B, - QIF_INODES_B, - QIF_BTIME_B, - QIF_ITIME_B, -}; - -#define QIF_BLIMITS (1 << QIF_BLIMITS_B) -#define QIF_SPACE (1 << QIF_SPACE_B) -#define QIF_ILIMITS (1 << QIF_ILIMITS_B) -#define QIF_INODES (1 << QIF_INODES_B) -#define QIF_BTIME (1 << QIF_BTIME_B) -#define QIF_ITIME (1 << QIF_ITIME_B) -#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS) -#define QIF_USAGE (QIF_SPACE | QIF_INODES) -#define QIF_TIMES (QIF_BTIME | QIF_ITIME) -#define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES) - -struct if_dqblk { - __u64 dqb_bhardlimit; - __u64 dqb_bsoftlimit; - __u64 dqb_curspace; - __u64 dqb_ihardlimit; - __u64 dqb_isoftlimit; - __u64 dqb_curinodes; - __u64 dqb_btime; - __u64 dqb_itime; - __u32 dqb_valid; -}; - -/* - * Structure used for setting quota information about file via quotactl - * Following flags are used to specify which fields are valid - */ -#define IIF_BGRACE 1 -#define IIF_IGRACE 2 -#define IIF_FLAGS 4 -#define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS) - -struct if_dqinfo { - __u64 dqi_bgrace; - __u64 dqi_igrace; - __u32 dqi_flags; - __u32 dqi_valid; -}; - -/* - * Definitions for quota netlink interface - */ -#define QUOTA_NL_NOWARN 0 -#define QUOTA_NL_IHARDWARN 1 /* Inode hardlimit reached */ -#define QUOTA_NL_ISOFTLONGWARN 2 /* Inode grace time expired */ -#define QUOTA_NL_ISOFTWARN 3 /* Inode softlimit reached */ -#define QUOTA_NL_BHARDWARN 4 /* Block hardlimit reached */ -#define QUOTA_NL_BSOFTLONGWARN 5 /* Block grace time expired */ -#define QUOTA_NL_BSOFTWARN 6 /* Block softlimit reached */ -#define QUOTA_NL_IHARDBELOW 7 /* Usage got below inode hardlimit */ -#define QUOTA_NL_ISOFTBELOW 8 /* Usage got below inode softlimit */ -#define QUOTA_NL_BHARDBELOW 9 /* Usage got below block hardlimit */ -#define QUOTA_NL_BSOFTBELOW 10 /* Usage got below block softlimit */ - -enum { - QUOTA_NL_C_UNSPEC, - QUOTA_NL_C_WARNING, - __QUOTA_NL_C_MAX, -}; -#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1) - -enum { - QUOTA_NL_A_UNSPEC, - QUOTA_NL_A_QTYPE, - QUOTA_NL_A_EXCESS_ID, - QUOTA_NL_A_WARNING, - QUOTA_NL_A_DEV_MAJOR, - QUOTA_NL_A_DEV_MINOR, - QUOTA_NL_A_CAUSED_ID, - __QUOTA_NL_A_MAX, -}; -#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1) - - -#ifdef __KERNEL__ #include #include #include @@ -183,6 +46,7 @@ enum { #include #include #include +#include #undef USRQUOTA #undef GRPQUOTA @@ -543,5 +407,4 @@ struct quota_module_name { {QFMT_VFS_V0, "quota_v2"},\ {0, NULL}} -#endif /* __KERNEL__ */ #endif /* _QUOTA_ */ diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h deleted file mode 100644 index 8c4bbdecc44f..000000000000 --- a/include/linux/radeonfb.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __LINUX_RADEONFB_H__ -#define __LINUX_RADEONFB_H__ - -#include -#include - -#define ATY_RADEON_LCD_ON 0x00000001 -#define ATY_RADEON_CRT_ON 0x00000002 - - -#define FBIO_RADEON_GET_MIRROR _IOR('@', 3, size_t) -#define FBIO_RADEON_SET_MIRROR _IOW('@', 4, size_t) - -#endif - diff --git a/include/linux/random.h b/include/linux/random.h index ac621ce886ca..6330ed47b38b 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -3,50 +3,11 @@ * * Include file for the random number generator. */ - #ifndef _LINUX_RANDOM_H #define _LINUX_RANDOM_H -#include -#include -#include - -/* ioctl()'s for the random number generator */ - -/* Get the entropy count. */ -#define RNDGETENTCNT _IOR( 'R', 0x00, int ) - -/* Add to (or subtract from) the entropy count. (Superuser only.) */ -#define RNDADDTOENTCNT _IOW( 'R', 0x01, int ) - -/* Get the contents of the entropy pool. (Superuser only.) */ -#define RNDGETPOOL _IOR( 'R', 0x02, int [2] ) - -/* - * Write bytes into the entropy pool and add to the entropy count. - * (Superuser only.) - */ -#define RNDADDENTROPY _IOW( 'R', 0x03, int [2] ) +#include -/* Clear entropy count to 0. (Superuser only.) */ -#define RNDZAPENTCNT _IO( 'R', 0x04 ) - -/* Clear the entropy pool and associated counters. (Superuser only.) */ -#define RNDCLEARPOOL _IO( 'R', 0x06 ) - -struct rand_pool_info { - int entropy_count; - int buf_size; - __u32 buf[0]; -}; - -struct rnd_state { - __u32 s1, s2, s3; -}; - -/* Exported functions */ - -#ifdef __KERNEL__ extern void add_device_randomness(const void *, unsigned int); extern void add_input_randomness(unsigned int type, unsigned int code, @@ -104,6 +65,4 @@ static inline int arch_get_random_int(unsigned int *v) } #endif -#endif /* __KERNEL___ */ - #endif /* _LINUX_RANDOM_H */ diff --git a/include/linux/raw.h b/include/linux/raw.h deleted file mode 100644 index 62d543e70603..000000000000 --- a/include/linux/raw.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __LINUX_RAW_H -#define __LINUX_RAW_H - -#include - -#define RAW_SETBIND _IO( 0xac, 0 ) -#define RAW_GETBIND _IO( 0xac, 1 ) - -struct raw_config_request -{ - int raw_minor; - __u64 block_major; - __u64 block_minor; -}; - -#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS - -#endif /* __LINUX_RAW_H */ diff --git a/include/linux/rds.h b/include/linux/rds.h deleted file mode 100644 index 91950950aa59..000000000000 --- a/include/linux/rds.h +++ /dev/null @@ -1,285 +0,0 @@ -/* - * Copyright (c) 2008 Oracle. All rights reserved. - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * OpenIB.org BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - */ - -#ifndef _LINUX_RDS_H -#define _LINUX_RDS_H - -#include - -#define RDS_IB_ABI_VERSION 0x301 - -/* - * setsockopt/getsockopt for SOL_RDS - */ -#define RDS_CANCEL_SENT_TO 1 -#define RDS_GET_MR 2 -#define RDS_FREE_MR 3 -/* deprecated: RDS_BARRIER 4 */ -#define RDS_RECVERR 5 -#define RDS_CONG_MONITOR 6 -#define RDS_GET_MR_FOR_DEST 7 - -/* - * Control message types for SOL_RDS. - * - * CMSG_RDMA_ARGS (sendmsg) - * Request a RDMA transfer to/from the specified - * memory ranges. - * The cmsg_data is a struct rds_rdma_args. - * RDS_CMSG_RDMA_DEST (recvmsg, sendmsg) - * Kernel informs application about intended - * source/destination of a RDMA transfer - * RDS_CMSG_RDMA_MAP (sendmsg) - * Application asks kernel to map the given - * memory range into a IB MR, and send the - * R_Key along in an RDS extension header. - * The cmsg_data is a struct rds_get_mr_args, - * the same as for the GET_MR setsockopt. - * RDS_CMSG_RDMA_STATUS (recvmsg) - * Returns the status of a completed RDMA operation. - */ -#define RDS_CMSG_RDMA_ARGS 1 -#define RDS_CMSG_RDMA_DEST 2 -#define RDS_CMSG_RDMA_MAP 3 -#define RDS_CMSG_RDMA_STATUS 4 -#define RDS_CMSG_CONG_UPDATE 5 -#define RDS_CMSG_ATOMIC_FADD 6 -#define RDS_CMSG_ATOMIC_CSWP 7 -#define RDS_CMSG_MASKED_ATOMIC_FADD 8 -#define RDS_CMSG_MASKED_ATOMIC_CSWP 9 - -#define RDS_INFO_FIRST 10000 -#define RDS_INFO_COUNTERS 10000 -#define RDS_INFO_CONNECTIONS 10001 -/* 10002 aka RDS_INFO_FLOWS is deprecated */ -#define RDS_INFO_SEND_MESSAGES 10003 -#define RDS_INFO_RETRANS_MESSAGES 10004 -#define RDS_INFO_RECV_MESSAGES 10005 -#define RDS_INFO_SOCKETS 10006 -#define RDS_INFO_TCP_SOCKETS 10007 -#define RDS_INFO_IB_CONNECTIONS 10008 -#define RDS_INFO_CONNECTION_STATS 10009 -#define RDS_INFO_IWARP_CONNECTIONS 10010 -#define RDS_INFO_LAST 10010 - -struct rds_info_counter { - uint8_t name[32]; - uint64_t value; -} __attribute__((packed)); - -#define RDS_INFO_CONNECTION_FLAG_SENDING 0x01 -#define RDS_INFO_CONNECTION_FLAG_CONNECTING 0x02 -#define RDS_INFO_CONNECTION_FLAG_CONNECTED 0x04 - -#define TRANSNAMSIZ 16 - -struct rds_info_connection { - uint64_t next_tx_seq; - uint64_t next_rx_seq; - __be32 laddr; - __be32 faddr; - uint8_t transport[TRANSNAMSIZ]; /* null term ascii */ - uint8_t flags; -} __attribute__((packed)); - -#define RDS_INFO_MESSAGE_FLAG_ACK 0x01 -#define RDS_INFO_MESSAGE_FLAG_FAST_ACK 0x02 - -struct rds_info_message { - uint64_t seq; - uint32_t len; - __be32 laddr; - __be32 faddr; - __be16 lport; - __be16 fport; - uint8_t flags; -} __attribute__((packed)); - -struct rds_info_socket { - uint32_t sndbuf; - __be32 bound_addr; - __be32 connected_addr; - __be16 bound_port; - __be16 connected_port; - uint32_t rcvbuf; - uint64_t inum; -} __attribute__((packed)); - -struct rds_info_tcp_socket { - __be32 local_addr; - __be16 local_port; - __be32 peer_addr; - __be16 peer_port; - uint64_t hdr_rem; - uint64_t data_rem; - uint32_t last_sent_nxt; - uint32_t last_expected_una; - uint32_t last_seen_una; -} __attribute__((packed)); - -#define RDS_IB_GID_LEN 16 -struct rds_info_rdma_connection { - __be32 src_addr; - __be32 dst_addr; - uint8_t src_gid[RDS_IB_GID_LEN]; - uint8_t dst_gid[RDS_IB_GID_LEN]; - - uint32_t max_send_wr; - uint32_t max_recv_wr; - uint32_t max_send_sge; - uint32_t rdma_mr_max; - uint32_t rdma_mr_size; -}; - -/* - * Congestion monitoring. - * Congestion control in RDS happens at the host connection - * level by exchanging a bitmap marking congested ports. - * By default, a process sleeping in poll() is always woken - * up when the congestion map is updated. - * With explicit monitoring, an application can have more - * fine-grained control. - * The application installs a 64bit mask value in the socket, - * where each bit corresponds to a group of ports. - * When a congestion update arrives, RDS checks the set of - * ports that are now uncongested against the list bit mask - * installed in the socket, and if they overlap, we queue a - * cong_notification on the socket. - * - * To install the congestion monitor bitmask, use RDS_CONG_MONITOR - * with the 64bit mask. - * Congestion updates are received via RDS_CMSG_CONG_UPDATE - * control messages. - * - * The correspondence between bits and ports is - * 1 << (portnum % 64) - */ -#define RDS_CONG_MONITOR_SIZE 64 -#define RDS_CONG_MONITOR_BIT(port) (((unsigned int) port) % RDS_CONG_MONITOR_SIZE) -#define RDS_CONG_MONITOR_MASK(port) (1ULL << RDS_CONG_MONITOR_BIT(port)) - -/* - * RDMA related types - */ - -/* - * This encapsulates a remote memory location. - * In the current implementation, it contains the R_Key - * of the remote memory region, and the offset into it - * (so that the application does not have to worry about - * alignment). - */ -typedef uint64_t rds_rdma_cookie_t; - -struct rds_iovec { - uint64_t addr; - uint64_t bytes; -}; - -struct rds_get_mr_args { - struct rds_iovec vec; - uint64_t cookie_addr; - uint64_t flags; -}; - -struct rds_get_mr_for_dest_args { - struct sockaddr_storage dest_addr; - struct rds_iovec vec; - uint64_t cookie_addr; - uint64_t flags; -}; - -struct rds_free_mr_args { - rds_rdma_cookie_t cookie; - uint64_t flags; -}; - -struct rds_rdma_args { - rds_rdma_cookie_t cookie; - struct rds_iovec remote_vec; - uint64_t local_vec_addr; - uint64_t nr_local; - uint64_t flags; - uint64_t user_token; -}; - -struct rds_atomic_args { - rds_rdma_cookie_t cookie; - uint64_t local_addr; - uint64_t remote_addr; - union { - struct { - uint64_t compare; - uint64_t swap; - } cswp; - struct { - uint64_t add; - } fadd; - struct { - uint64_t compare; - uint64_t swap; - uint64_t compare_mask; - uint64_t swap_mask; - } m_cswp; - struct { - uint64_t add; - uint64_t nocarry_mask; - } m_fadd; - }; - uint64_t flags; - uint64_t user_token; -}; - -struct rds_rdma_notify { - uint64_t user_token; - int32_t status; -}; - -#define RDS_RDMA_SUCCESS 0 -#define RDS_RDMA_REMOTE_ERROR 1 -#define RDS_RDMA_CANCELED 2 -#define RDS_RDMA_DROPPED 3 -#define RDS_RDMA_OTHER_ERROR 4 - -/* - * Common set of flags for all RDMA related structs - */ -#define RDS_RDMA_READWRITE 0x0001 -#define RDS_RDMA_FENCE 0x0002 /* use FENCE for immediate send */ -#define RDS_RDMA_INVALIDATE 0x0004 /* invalidate R_Key after freeing MR */ -#define RDS_RDMA_USE_ONCE 0x0008 /* free MR after use */ -#define RDS_RDMA_DONTWAIT 0x0010 /* Don't wait in SET_BARRIER */ -#define RDS_RDMA_NOTIFY_ME 0x0020 /* Notify when operation completes */ -#define RDS_RDMA_SILENT 0x0040 /* Do not interrupt remote */ - -#endif /* IB_RDS_H */ diff --git a/include/linux/reboot.h b/include/linux/reboot.h index e0879a70e830..23b36304cd88 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -1,43 +1,9 @@ #ifndef _LINUX_REBOOT_H #define _LINUX_REBOOT_H -/* - * Magic values required to use _reboot() system call. - */ - -#define LINUX_REBOOT_MAGIC1 0xfee1dead -#define LINUX_REBOOT_MAGIC2 672274793 -#define LINUX_REBOOT_MAGIC2A 85072278 -#define LINUX_REBOOT_MAGIC2B 369367448 -#define LINUX_REBOOT_MAGIC2C 537993216 - - -/* - * Commands accepted by the _reboot() system call. - * - * RESTART Restart system using default command and mode. - * HALT Stop OS and give system control to ROM monitor, if any. - * CAD_ON Ctrl-Alt-Del sequence causes RESTART command. - * CAD_OFF Ctrl-Alt-Del sequence sends SIGINT to init task. - * POWER_OFF Stop OS and remove all power from system, if possible. - * RESTART2 Restart system using given command string. - * SW_SUSPEND Suspend system using software suspend if compiled in. - * KEXEC Restart system using a previously loaded Linux kernel - */ - -#define LINUX_REBOOT_CMD_RESTART 0x01234567 -#define LINUX_REBOOT_CMD_HALT 0xCDEF0123 -#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF -#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000 -#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC -#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4 -#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 -#define LINUX_REBOOT_CMD_KEXEC 0x45584543 - - -#ifdef __KERNEL__ #include +#include #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN @@ -84,6 +50,4 @@ extern int orderly_poweroff(bool force); extern void emergency_restart(void); #include -#endif - #endif /* _LINUX_REBOOT_H */ diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h deleted file mode 100644 index ea3700cd7367..000000000000 --- a/include/linux/reiserfs_fs.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright 1996, 1997, 1998 Hans Reiser, see reiserfs/README for licensing and copyright details - */ -#ifndef _LINUX_REISER_FS_H -#define _LINUX_REISER_FS_H - -#include -#include - -/* - * include/linux/reiser_fs.h - * - * Reiser File System constants and structures - * - */ - -/* ioctl's command */ -#define REISERFS_IOC_UNPACK _IOW(0xCD,1,long) -/* define following flags to be the same as in ext2, so that chattr(1), - lsattr(1) will work with us. */ -#define REISERFS_IOC_GETFLAGS FS_IOC_GETFLAGS -#define REISERFS_IOC_SETFLAGS FS_IOC_SETFLAGS -#define REISERFS_IOC_GETVERSION FS_IOC_GETVERSION -#define REISERFS_IOC_SETVERSION FS_IOC_SETVERSION - -#endif /* _LINUX_REISER_FS_H */ diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h deleted file mode 100644 index d8ce17c2459a..000000000000 --- a/include/linux/reiserfs_xattr.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - File: linux/reiserfs_xattr.h -*/ - -#ifndef _LINUX_REISERFS_XATTR_H -#define _LINUX_REISERFS_XATTR_H - -#include - -/* Magic value in header */ -#define REISERFS_XATTR_MAGIC 0x52465841 /* "RFXA" */ - -struct reiserfs_xattr_header { - __le32 h_magic; /* magic number for identification */ - __le32 h_hash; /* hash of the value */ -}; - -struct reiserfs_security_handle { - char *name; - void *value; - size_t length; -}; - -#endif /* _LINUX_REISERFS_XATTR_H */ diff --git a/include/linux/resource.h b/include/linux/resource.h index d01c96c1966e..5bc3116e649c 100644 --- a/include/linux/resource.h +++ b/include/linux/resource.h @@ -1,82 +1,8 @@ #ifndef _LINUX_RESOURCE_H #define _LINUX_RESOURCE_H -#include -#include +#include -/* - * Resource control/accounting header file for linux - */ - -/* - * Definition of struct rusage taken from BSD 4.3 Reno - * - * We don't support all of these yet, but we might as well have them.... - * Otherwise, each time we add new items, programs which depend on this - * structure will lose. This reduces the chances of that happening. - */ -#define RUSAGE_SELF 0 -#define RUSAGE_CHILDREN (-1) -#define RUSAGE_BOTH (-2) /* sys_wait4() uses this */ -#define RUSAGE_THREAD 1 /* only the calling thread */ - -struct rusage { - struct timeval ru_utime; /* user time used */ - struct timeval ru_stime; /* system time used */ - long ru_maxrss; /* maximum resident set size */ - long ru_ixrss; /* integral shared memory size */ - long ru_idrss; /* integral unshared data size */ - long ru_isrss; /* integral unshared stack size */ - long ru_minflt; /* page reclaims */ - long ru_majflt; /* page faults */ - long ru_nswap; /* swaps */ - long ru_inblock; /* block input operations */ - long ru_oublock; /* block output operations */ - long ru_msgsnd; /* messages sent */ - long ru_msgrcv; /* messages received */ - long ru_nsignals; /* signals received */ - long ru_nvcsw; /* voluntary context switches */ - long ru_nivcsw; /* involuntary " */ -}; - -struct rlimit { - unsigned long rlim_cur; - unsigned long rlim_max; -}; - -#define RLIM64_INFINITY (~0ULL) - -struct rlimit64 { - __u64 rlim_cur; - __u64 rlim_max; -}; - -#define PRIO_MIN (-20) -#define PRIO_MAX 20 - -#define PRIO_PROCESS 0 -#define PRIO_PGRP 1 -#define PRIO_USER 2 - -/* - * Limit the stack by to some sane default: root can always - * increase this limit if needed.. 8MB seems reasonable. - */ -#define _STK_LIM (8*1024*1024) - -/* - * GPG2 wants 64kB of mlocked memory, to make sure pass phrases - * and other sensitive information are never written to disk. - */ -#define MLOCK_LIMIT ((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024) - -/* - * Due to binary compatibility, the actual resource numbers - * may be different for different linux versions.. - */ -#include - -#ifdef __KERNEL__ struct task_struct; @@ -84,6 +10,4 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru); int do_prlimit(struct task_struct *tsk, unsigned int resource, struct rlimit *new_rlim, struct rlimit *old_rlim); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 0ec590bb3611..d9010789b4e8 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -1,6 +1,3 @@ -#ifndef __RFKILL_H -#define __RFKILL_H - /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov @@ -18,92 +15,11 @@ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#ifndef __RFKILL_H +#define __RFKILL_H -#include - -/* define userspace visible states */ -#define RFKILL_STATE_SOFT_BLOCKED 0 -#define RFKILL_STATE_UNBLOCKED 1 -#define RFKILL_STATE_HARD_BLOCKED 2 - -/** - * enum rfkill_type - type of rfkill switch. - * - * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type) - * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. - * @RFKILL_TYPE_GPS: switch is on a GPS device. - * @RFKILL_TYPE_FM: switch is on a FM radio device. - * @NUM_RFKILL_TYPES: number of defined rfkill types - */ -enum rfkill_type { - RFKILL_TYPE_ALL = 0, - RFKILL_TYPE_WLAN, - RFKILL_TYPE_BLUETOOTH, - RFKILL_TYPE_UWB, - RFKILL_TYPE_WIMAX, - RFKILL_TYPE_WWAN, - RFKILL_TYPE_GPS, - RFKILL_TYPE_FM, - NUM_RFKILL_TYPES, -}; - -/** - * enum rfkill_operation - operation types - * @RFKILL_OP_ADD: a device was added - * @RFKILL_OP_DEL: a device was removed - * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device - * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) - */ -enum rfkill_operation { - RFKILL_OP_ADD = 0, - RFKILL_OP_DEL, - RFKILL_OP_CHANGE, - RFKILL_OP_CHANGE_ALL, -}; - -/** - * struct rfkill_event - events for userspace on /dev/rfkill - * @idx: index of dev rfkill - * @type: type of the rfkill struct - * @op: operation code - * @hard: hard state (0/1) - * @soft: soft state (0/1) - * - * Structure used for userspace communication on /dev/rfkill, - * used for events from the kernel and control to the kernel. - */ -struct rfkill_event { - __u32 idx; - __u8 type; - __u8 op; - __u8 soft, hard; -} __attribute__((packed)); - -/* - * We are planning to be backward and forward compatible with changes - * to the event struct, by adding new, optional, members at the end. - * When reading an event (whether the kernel from userspace or vice - * versa) we need to accept anything that's at least as large as the - * version 1 event size, but might be able to accept other sizes in - * the future. - * - * One exception is the kernel -- we already have two event sizes in - * that we've made the 'hard' member optional since our only option - * is to ignore it anyway. - */ -#define RFKILL_EVENT_SIZE_V1 8 - -/* ioctl for turning off rfkill-input (if present) */ -#define RFKILL_IOC_MAGIC 'R' -#define RFKILL_IOC_NOINPUT 1 -#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) +#include -/* and that's all userspace gets */ -#ifdef __KERNEL__ /* don't allow anyone to use these in the kernel */ enum rfkill_user_states { RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, @@ -385,6 +301,4 @@ rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) } #endif -#endif /* __KERNEL__ */ - #endif /* RFKILL_H */ diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h deleted file mode 100644 index 5f57f93b284f..000000000000 --- a/include/linux/romfs_fs.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __LINUX_ROMFS_FS_H -#define __LINUX_ROMFS_FS_H - -#include -#include - -/* The basic structures of the romfs filesystem */ - -#define ROMBSIZE BLOCK_SIZE -#define ROMBSBITS BLOCK_SIZE_BITS -#define ROMBMASK (ROMBSIZE-1) -#define ROMFS_MAGIC 0x7275 - -#define ROMFS_MAXFN 128 - -#define __mkw(h,l) (((h)&0x00ff)<< 8|((l)&0x00ff)) -#define __mkl(h,l) (((h)&0xffff)<<16|((l)&0xffff)) -#define __mk4(a,b,c,d) cpu_to_be32(__mkl(__mkw(a,b),__mkw(c,d))) -#define ROMSB_WORD0 __mk4('-','r','o','m') -#define ROMSB_WORD1 __mk4('1','f','s','-') - -/* On-disk "super block" */ - -struct romfs_super_block { - __be32 word0; - __be32 word1; - __be32 size; - __be32 checksum; - char name[0]; /* volume name */ -}; - -/* On disk inode */ - -struct romfs_inode { - __be32 next; /* low 4 bits see ROMFH_ */ - __be32 spec; - __be32 size; - __be32 checksum; - char name[0]; -}; - -#define ROMFH_TYPE 7 -#define ROMFH_HRD 0 -#define ROMFH_DIR 1 -#define ROMFH_REG 2 -#define ROMFH_SYM 3 -#define ROMFH_BLK 4 -#define ROMFH_CHR 5 -#define ROMFH_SCK 6 -#define ROMFH_FIF 7 -#define ROMFH_EXEC 8 - -/* Alignment */ - -#define ROMFH_SIZE 16 -#define ROMFH_PAD (ROMFH_SIZE-1) -#define ROMFH_MASK (~ROMFH_PAD) - -#endif diff --git a/include/linux/rose.h b/include/linux/rose.h deleted file mode 100644 index 1fcfe95893b8..000000000000 --- a/include/linux/rose.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * These are the public elements of the Linux kernel Rose implementation. - * For kernel AX.25 see the file ax25.h. This file requires ax25.h for the - * definition of the ax25_address structure. - */ - -#ifndef ROSE_KERNEL_H -#define ROSE_KERNEL_H - -#include -#include - -#define ROSE_MTU 251 - -#define ROSE_MAX_DIGIS 6 - -#define ROSE_DEFER 1 -#define ROSE_T1 2 -#define ROSE_T2 3 -#define ROSE_T3 4 -#define ROSE_IDLE 5 -#define ROSE_QBITINCL 6 -#define ROSE_HOLDBACK 7 - -#define SIOCRSGCAUSE (SIOCPROTOPRIVATE+0) -#define SIOCRSSCAUSE (SIOCPROTOPRIVATE+1) -#define SIOCRSL2CALL (SIOCPROTOPRIVATE+2) -#define SIOCRSSL2CALL (SIOCPROTOPRIVATE+2) -#define SIOCRSACCEPT (SIOCPROTOPRIVATE+3) -#define SIOCRSCLRRT (SIOCPROTOPRIVATE+4) -#define SIOCRSGL2CALL (SIOCPROTOPRIVATE+5) -#define SIOCRSGFACILITIES (SIOCPROTOPRIVATE+6) - -#define ROSE_DTE_ORIGINATED 0x00 -#define ROSE_NUMBER_BUSY 0x01 -#define ROSE_INVALID_FACILITY 0x03 -#define ROSE_NETWORK_CONGESTION 0x05 -#define ROSE_OUT_OF_ORDER 0x09 -#define ROSE_ACCESS_BARRED 0x0B -#define ROSE_NOT_OBTAINABLE 0x0D -#define ROSE_REMOTE_PROCEDURE 0x11 -#define ROSE_LOCAL_PROCEDURE 0x13 -#define ROSE_SHIP_ABSENT 0x39 - -typedef struct { - char rose_addr[5]; -} rose_address; - -struct sockaddr_rose { - __kernel_sa_family_t srose_family; - rose_address srose_addr; - ax25_address srose_call; - int srose_ndigis; - ax25_address srose_digi; -}; - -struct full_sockaddr_rose { - __kernel_sa_family_t srose_family; - rose_address srose_addr; - ax25_address srose_call; - unsigned int srose_ndigis; - ax25_address srose_digis[ROSE_MAX_DIGIS]; -}; - -struct rose_route_struct { - rose_address address; - unsigned short mask; - ax25_address neighbour; - char device[16]; - unsigned char ndigis; - ax25_address digipeaters[AX25_MAX_DIGIS]; -}; - -struct rose_cause_struct { - unsigned char cause; - unsigned char diagnostic; -}; - -struct rose_facilities_struct { - rose_address source_addr, dest_addr; - ax25_address source_call, dest_call; - unsigned char source_ndigis, dest_ndigis; - ax25_address source_digis[ROSE_MAX_DIGIS]; - ax25_address dest_digis[ROSE_MAX_DIGIS]; - unsigned int rand; - rose_address fail_addr; - ax25_address fail_call; -}; - -#endif diff --git a/include/linux/route.h b/include/linux/route.h deleted file mode 100644 index 6600708311c8..000000000000 --- a/include/linux/route.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Global definitions for the IP router interface. - * - * Version: @(#)route.h 1.0.3 05/27/93 - * - * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988 - * for the purposes of compatibility only. - * - * Fred N. van Kempen, - * - * Changes: - * Mike McLagan : Routing by source - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _LINUX_ROUTE_H -#define _LINUX_ROUTE_H - -#include -#include - -/* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */ -struct rtentry { - unsigned long rt_pad1; - struct sockaddr rt_dst; /* target address */ - struct sockaddr rt_gateway; /* gateway addr (RTF_GATEWAY) */ - struct sockaddr rt_genmask; /* target network mask (IP) */ - unsigned short rt_flags; - short rt_pad2; - unsigned long rt_pad3; - void *rt_pad4; - short rt_metric; /* +1 for binary compatibility! */ - char __user *rt_dev; /* forcing the device at add */ - unsigned long rt_mtu; /* per route MTU/Window */ -#ifndef __KERNEL__ -#define rt_mss rt_mtu /* Compatibility :-( */ -#endif - unsigned long rt_window; /* Window clamping */ - unsigned short rt_irtt; /* Initial RTT */ -}; - - -#define RTF_UP 0x0001 /* route usable */ -#define RTF_GATEWAY 0x0002 /* destination is a gateway */ -#define RTF_HOST 0x0004 /* host entry (net otherwise) */ -#define RTF_REINSTATE 0x0008 /* reinstate route after tmout */ -#define RTF_DYNAMIC 0x0010 /* created dyn. (by redirect) */ -#define RTF_MODIFIED 0x0020 /* modified dyn. (by redirect) */ -#define RTF_MTU 0x0040 /* specific MTU for this route */ -#define RTF_MSS RTF_MTU /* Compatibility :-( */ -#define RTF_WINDOW 0x0080 /* per route window clamping */ -#define RTF_IRTT 0x0100 /* Initial round trip time */ -#define RTF_REJECT 0x0200 /* Reject route */ - -/* - * uses RTF values >= 64k - */ - - - -#endif /* _LINUX_ROUTE_H */ - diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 20ec4d3bed73..9531845c419f 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -11,102 +11,10 @@ #ifndef _LINUX_RTC_H_ #define _LINUX_RTC_H_ -/* - * The struct used to pass data via the following ioctl. Similar to the - * struct tm in , but it needs to be here so that the kernel - * source is self contained, allowing cross-compiles, etc. etc. - */ - -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; -}; - -/* - * This data structure is inspired by the EFI (v0.92) wakeup - * alarm API. - */ -struct rtc_wkalrm { - unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */ - unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */ - struct rtc_time time; /* time the alarm is set to */ -}; - -/* - * Data structure to control PLL correction some better RTC feature - * pll_value is used to get or set current value of correction, - * the rest of the struct is used to query HW capabilities. - * This is modeled after the RTC used in Q40/Q60 computers but - * should be sufficiently flexible for other devices - * - * +ve pll_value means clock will run faster by - * pll_value*pll_posmult/pll_clock - * -ve pll_value means clock will run slower by - * pll_value*pll_negmult/pll_clock - */ - -struct rtc_pll_info { - int pll_ctrl; /* placeholder for fancier control */ - int pll_value; /* get/set correction value */ - int pll_max; /* max +ve (faster) adjustment value */ - int pll_min; /* max -ve (slower) adjustment value */ - int pll_posmult; /* factor for +ve correction */ - int pll_negmult; /* factor for -ve correction */ - long pll_clock; /* base PLL frequency */ -}; - -/* - * ioctl calls that are permitted to the /dev/rtc interface, if - * any of the RTC drivers are enabled. - */ - -#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */ -#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */ -#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */ -#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */ -#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */ -#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */ -#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */ -#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */ - -#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */ -#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */ -#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */ -#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */ -#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */ -#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */ -#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */ -#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */ - -#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/ -#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/ - -#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ -#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ - -#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */ -#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */ - -/* interrupt flags */ -#define RTC_IRQF 0x80 /* Any of the following is active */ -#define RTC_PF 0x40 /* Periodic interrupt */ -#define RTC_AF 0x20 /* Alarm interrupt */ -#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */ - - -#define RTC_MAX_FREQ 8192 - -#ifdef __KERNEL__ #include #include +#include extern int rtc_month_days(unsigned int month, unsigned int year); extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year); @@ -282,6 +190,4 @@ extern int rtc_hctosys_ret; #define rtc_hctosys_ret -ENODEV #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_RTC_H_ */ diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index db71c4ad8624..7002bbfd5d4a 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -1,616 +1,10 @@ #ifndef __LINUX_RTNETLINK_H #define __LINUX_RTNETLINK_H -#include -#include -#include -#include -#include - -/* rtnetlink families. Values up to 127 are reserved for real address - * families, values above 128 may be used arbitrarily. - */ -#define RTNL_FAMILY_IPMR 128 -#define RTNL_FAMILY_IP6MR 129 -#define RTNL_FAMILY_MAX 129 - -/**** - * Routing/neighbour discovery messages. - ****/ - -/* Types of messages */ - -enum { - RTM_BASE = 16, -#define RTM_BASE RTM_BASE - - RTM_NEWLINK = 16, -#define RTM_NEWLINK RTM_NEWLINK - RTM_DELLINK, -#define RTM_DELLINK RTM_DELLINK - RTM_GETLINK, -#define RTM_GETLINK RTM_GETLINK - RTM_SETLINK, -#define RTM_SETLINK RTM_SETLINK - - RTM_NEWADDR = 20, -#define RTM_NEWADDR RTM_NEWADDR - RTM_DELADDR, -#define RTM_DELADDR RTM_DELADDR - RTM_GETADDR, -#define RTM_GETADDR RTM_GETADDR - - RTM_NEWROUTE = 24, -#define RTM_NEWROUTE RTM_NEWROUTE - RTM_DELROUTE, -#define RTM_DELROUTE RTM_DELROUTE - RTM_GETROUTE, -#define RTM_GETROUTE RTM_GETROUTE - - RTM_NEWNEIGH = 28, -#define RTM_NEWNEIGH RTM_NEWNEIGH - RTM_DELNEIGH, -#define RTM_DELNEIGH RTM_DELNEIGH - RTM_GETNEIGH, -#define RTM_GETNEIGH RTM_GETNEIGH - - RTM_NEWRULE = 32, -#define RTM_NEWRULE RTM_NEWRULE - RTM_DELRULE, -#define RTM_DELRULE RTM_DELRULE - RTM_GETRULE, -#define RTM_GETRULE RTM_GETRULE - - RTM_NEWQDISC = 36, -#define RTM_NEWQDISC RTM_NEWQDISC - RTM_DELQDISC, -#define RTM_DELQDISC RTM_DELQDISC - RTM_GETQDISC, -#define RTM_GETQDISC RTM_GETQDISC - - RTM_NEWTCLASS = 40, -#define RTM_NEWTCLASS RTM_NEWTCLASS - RTM_DELTCLASS, -#define RTM_DELTCLASS RTM_DELTCLASS - RTM_GETTCLASS, -#define RTM_GETTCLASS RTM_GETTCLASS - - RTM_NEWTFILTER = 44, -#define RTM_NEWTFILTER RTM_NEWTFILTER - RTM_DELTFILTER, -#define RTM_DELTFILTER RTM_DELTFILTER - RTM_GETTFILTER, -#define RTM_GETTFILTER RTM_GETTFILTER - - RTM_NEWACTION = 48, -#define RTM_NEWACTION RTM_NEWACTION - RTM_DELACTION, -#define RTM_DELACTION RTM_DELACTION - RTM_GETACTION, -#define RTM_GETACTION RTM_GETACTION - - RTM_NEWPREFIX = 52, -#define RTM_NEWPREFIX RTM_NEWPREFIX - - RTM_GETMULTICAST = 58, -#define RTM_GETMULTICAST RTM_GETMULTICAST - - RTM_GETANYCAST = 62, -#define RTM_GETANYCAST RTM_GETANYCAST - - RTM_NEWNEIGHTBL = 64, -#define RTM_NEWNEIGHTBL RTM_NEWNEIGHTBL - RTM_GETNEIGHTBL = 66, -#define RTM_GETNEIGHTBL RTM_GETNEIGHTBL - RTM_SETNEIGHTBL, -#define RTM_SETNEIGHTBL RTM_SETNEIGHTBL - - RTM_NEWNDUSEROPT = 68, -#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT - - RTM_NEWADDRLABEL = 72, -#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL - RTM_DELADDRLABEL, -#define RTM_DELADDRLABEL RTM_DELADDRLABEL - RTM_GETADDRLABEL, -#define RTM_GETADDRLABEL RTM_GETADDRLABEL - - RTM_GETDCB = 78, -#define RTM_GETDCB RTM_GETDCB - RTM_SETDCB, -#define RTM_SETDCB RTM_SETDCB - - __RTM_MAX, -#define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) -}; - -#define RTM_NR_MSGTYPES (RTM_MAX + 1 - RTM_BASE) -#define RTM_NR_FAMILIES (RTM_NR_MSGTYPES >> 2) -#define RTM_FAM(cmd) (((cmd) - RTM_BASE) >> 2) - -/* - Generic structure for encapsulation of optional route information. - It is reminiscent of sockaddr, but with sa_family replaced - with attribute type. - */ - -struct rtattr { - unsigned short rta_len; - unsigned short rta_type; -}; - -/* Macros to handle rtattributes */ - -#define RTA_ALIGNTO 4 -#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) ) -#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \ - (rta)->rta_len >= sizeof(struct rtattr) && \ - (rta)->rta_len <= (len)) -#define RTA_NEXT(rta,attrlen) ((attrlen) -= RTA_ALIGN((rta)->rta_len), \ - (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len))) -#define RTA_LENGTH(len) (RTA_ALIGN(sizeof(struct rtattr)) + (len)) -#define RTA_SPACE(len) RTA_ALIGN(RTA_LENGTH(len)) -#define RTA_DATA(rta) ((void*)(((char*)(rta)) + RTA_LENGTH(0))) -#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0)) - - - - -/****************************************************************************** - * Definitions used in routing table administration. - ****/ - -struct rtmsg { - unsigned char rtm_family; - unsigned char rtm_dst_len; - unsigned char rtm_src_len; - unsigned char rtm_tos; - - unsigned char rtm_table; /* Routing table id */ - unsigned char rtm_protocol; /* Routing protocol; see below */ - unsigned char rtm_scope; /* See below */ - unsigned char rtm_type; /* See below */ - - unsigned rtm_flags; -}; - -/* rtm_type */ - -enum { - RTN_UNSPEC, - RTN_UNICAST, /* Gateway or direct route */ - RTN_LOCAL, /* Accept locally */ - RTN_BROADCAST, /* Accept locally as broadcast, - send as broadcast */ - RTN_ANYCAST, /* Accept locally as broadcast, - but send as unicast */ - RTN_MULTICAST, /* Multicast route */ - RTN_BLACKHOLE, /* Drop */ - RTN_UNREACHABLE, /* Destination is unreachable */ - RTN_PROHIBIT, /* Administratively prohibited */ - RTN_THROW, /* Not in this table */ - RTN_NAT, /* Translate this address */ - RTN_XRESOLVE, /* Use external resolver */ - __RTN_MAX -}; - -#define RTN_MAX (__RTN_MAX - 1) - - -/* rtm_protocol */ - -#define RTPROT_UNSPEC 0 -#define RTPROT_REDIRECT 1 /* Route installed by ICMP redirects; - not used by current IPv4 */ -#define RTPROT_KERNEL 2 /* Route installed by kernel */ -#define RTPROT_BOOT 3 /* Route installed during boot */ -#define RTPROT_STATIC 4 /* Route installed by administrator */ - -/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel; - they are just passed from user and back as is. - It will be used by hypothetical multiple routing daemons. - Note that protocol values should be standardized in order to - avoid conflicts. - */ - -#define RTPROT_GATED 8 /* Apparently, GateD */ -#define RTPROT_RA 9 /* RDISC/ND router advertisements */ -#define RTPROT_MRT 10 /* Merit MRT */ -#define RTPROT_ZEBRA 11 /* Zebra */ -#define RTPROT_BIRD 12 /* BIRD */ -#define RTPROT_DNROUTED 13 /* DECnet routing daemon */ -#define RTPROT_XORP 14 /* XORP */ -#define RTPROT_NTK 15 /* Netsukuku */ -#define RTPROT_DHCP 16 /* DHCP client */ - -/* rtm_scope - - Really it is not scope, but sort of distance to the destination. - NOWHERE are reserved for not existing destinations, HOST is our - local addresses, LINK are destinations, located on directly attached - link and UNIVERSE is everywhere in the Universe. - - Intermediate values are also possible f.e. interior routes - could be assigned a value between UNIVERSE and LINK. -*/ - -enum rt_scope_t { - RT_SCOPE_UNIVERSE=0, -/* User defined values */ - RT_SCOPE_SITE=200, - RT_SCOPE_LINK=253, - RT_SCOPE_HOST=254, - RT_SCOPE_NOWHERE=255 -}; - -/* rtm_flags */ - -#define RTM_F_NOTIFY 0x100 /* Notify user of route change */ -#define RTM_F_CLONED 0x200 /* This route is cloned */ -#define RTM_F_EQUALIZE 0x400 /* Multipath equalizer: NI */ -#define RTM_F_PREFIX 0x800 /* Prefix addresses */ - -/* Reserved table identifiers */ - -enum rt_class_t { - RT_TABLE_UNSPEC=0, -/* User defined values */ - RT_TABLE_COMPAT=252, - RT_TABLE_DEFAULT=253, - RT_TABLE_MAIN=254, - RT_TABLE_LOCAL=255, - RT_TABLE_MAX=0xFFFFFFFF -}; - - -/* Routing message attributes */ - -enum rtattr_type_t { - RTA_UNSPEC, - RTA_DST, - RTA_SRC, - RTA_IIF, - RTA_OIF, - RTA_GATEWAY, - RTA_PRIORITY, - RTA_PREFSRC, - RTA_METRICS, - RTA_MULTIPATH, - RTA_PROTOINFO, /* no longer used */ - RTA_FLOW, - RTA_CACHEINFO, - RTA_SESSION, /* no longer used */ - RTA_MP_ALGO, /* no longer used */ - RTA_TABLE, - RTA_MARK, - __RTA_MAX -}; - -#define RTA_MAX (__RTA_MAX - 1) - -#define RTM_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg)))) -#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg)) - -/* RTM_MULTIPATH --- array of struct rtnexthop. - * - * "struct rtnexthop" describes all necessary nexthop information, - * i.e. parameters of path to a destination via this nexthop. - * - * At the moment it is impossible to set different prefsrc, mtu, window - * and rtt for different paths from multipath. - */ - -struct rtnexthop { - unsigned short rtnh_len; - unsigned char rtnh_flags; - unsigned char rtnh_hops; - int rtnh_ifindex; -}; - -/* rtnh_flags */ - -#define RTNH_F_DEAD 1 /* Nexthop is dead (used by multipath) */ -#define RTNH_F_PERVASIVE 2 /* Do recursive gateway lookup */ -#define RTNH_F_ONLINK 4 /* Gateway is forced on link */ - -/* Macros to handle hexthops */ - -#define RTNH_ALIGNTO 4 -#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) ) -#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \ - ((int)(rtnh)->rtnh_len) <= (len)) -#define RTNH_NEXT(rtnh) ((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len))) -#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len)) -#define RTNH_SPACE(len) RTNH_ALIGN(RTNH_LENGTH(len)) -#define RTNH_DATA(rtnh) ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0))) - -/* RTM_CACHEINFO */ - -struct rta_cacheinfo { - __u32 rta_clntref; - __u32 rta_lastuse; - __s32 rta_expires; - __u32 rta_error; - __u32 rta_used; - -#define RTNETLINK_HAVE_PEERINFO 1 - __u32 rta_id; - __u32 rta_ts; - __u32 rta_tsage; -}; - -/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */ - -enum { - RTAX_UNSPEC, -#define RTAX_UNSPEC RTAX_UNSPEC - RTAX_LOCK, -#define RTAX_LOCK RTAX_LOCK - RTAX_MTU, -#define RTAX_MTU RTAX_MTU - RTAX_WINDOW, -#define RTAX_WINDOW RTAX_WINDOW - RTAX_RTT, -#define RTAX_RTT RTAX_RTT - RTAX_RTTVAR, -#define RTAX_RTTVAR RTAX_RTTVAR - RTAX_SSTHRESH, -#define RTAX_SSTHRESH RTAX_SSTHRESH - RTAX_CWND, -#define RTAX_CWND RTAX_CWND - RTAX_ADVMSS, -#define RTAX_ADVMSS RTAX_ADVMSS - RTAX_REORDERING, -#define RTAX_REORDERING RTAX_REORDERING - RTAX_HOPLIMIT, -#define RTAX_HOPLIMIT RTAX_HOPLIMIT - RTAX_INITCWND, -#define RTAX_INITCWND RTAX_INITCWND - RTAX_FEATURES, -#define RTAX_FEATURES RTAX_FEATURES - RTAX_RTO_MIN, -#define RTAX_RTO_MIN RTAX_RTO_MIN - RTAX_INITRWND, -#define RTAX_INITRWND RTAX_INITRWND - __RTAX_MAX -}; - -#define RTAX_MAX (__RTAX_MAX - 1) - -#define RTAX_FEATURE_ECN 0x00000001 -#define RTAX_FEATURE_SACK 0x00000002 -#define RTAX_FEATURE_TIMESTAMP 0x00000004 -#define RTAX_FEATURE_ALLFRAG 0x00000008 - -struct rta_session { - __u8 proto; - __u8 pad1; - __u16 pad2; - - union { - struct { - __u16 sport; - __u16 dport; - } ports; - - struct { - __u8 type; - __u8 code; - __u16 ident; - } icmpt; - - __u32 spi; - } u; -}; - -/**** - * General form of address family dependent message. - ****/ - -struct rtgenmsg { - unsigned char rtgen_family; -}; - -/***************************************************************** - * Link layer specific messages. - ****/ - -/* struct ifinfomsg - * passes link level specific information, not dependent - * on network protocol. - */ - -struct ifinfomsg { - unsigned char ifi_family; - unsigned char __ifi_pad; - unsigned short ifi_type; /* ARPHRD_* */ - int ifi_index; /* Link index */ - unsigned ifi_flags; /* IFF_* flags */ - unsigned ifi_change; /* IFF_* change mask */ -}; - -/******************************************************************** - * prefix information - ****/ - -struct prefixmsg { - unsigned char prefix_family; - unsigned char prefix_pad1; - unsigned short prefix_pad2; - int prefix_ifindex; - unsigned char prefix_type; - unsigned char prefix_len; - unsigned char prefix_flags; - unsigned char prefix_pad3; -}; - -enum -{ - PREFIX_UNSPEC, - PREFIX_ADDRESS, - PREFIX_CACHEINFO, - __PREFIX_MAX -}; - -#define PREFIX_MAX (__PREFIX_MAX - 1) - -struct prefix_cacheinfo { - __u32 preferred_time; - __u32 valid_time; -}; - - -/***************************************************************** - * Traffic control messages. - ****/ - -struct tcmsg { - unsigned char tcm_family; - unsigned char tcm__pad1; - unsigned short tcm__pad2; - int tcm_ifindex; - __u32 tcm_handle; - __u32 tcm_parent; - __u32 tcm_info; -}; - -enum { - TCA_UNSPEC, - TCA_KIND, - TCA_OPTIONS, - TCA_STATS, - TCA_XSTATS, - TCA_RATE, - TCA_FCNT, - TCA_STATS2, - TCA_STAB, - __TCA_MAX -}; - -#define TCA_MAX (__TCA_MAX - 1) - -#define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) -#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) - -/******************************************************************** - * Neighbor Discovery userland options - ****/ - -struct nduseroptmsg { - unsigned char nduseropt_family; - unsigned char nduseropt_pad1; - unsigned short nduseropt_opts_len; /* Total length of options */ - int nduseropt_ifindex; - __u8 nduseropt_icmp_type; - __u8 nduseropt_icmp_code; - unsigned short nduseropt_pad2; - unsigned int nduseropt_pad3; - /* Followed by one or more ND options */ -}; - -enum { - NDUSEROPT_UNSPEC, - NDUSEROPT_SRCADDR, - __NDUSEROPT_MAX -}; - -#define NDUSEROPT_MAX (__NDUSEROPT_MAX - 1) - -#ifndef __KERNEL__ -/* RTnetlink multicast groups - backwards compatibility for userspace */ -#define RTMGRP_LINK 1 -#define RTMGRP_NOTIFY 2 -#define RTMGRP_NEIGH 4 -#define RTMGRP_TC 8 - -#define RTMGRP_IPV4_IFADDR 0x10 -#define RTMGRP_IPV4_MROUTE 0x20 -#define RTMGRP_IPV4_ROUTE 0x40 -#define RTMGRP_IPV4_RULE 0x80 - -#define RTMGRP_IPV6_IFADDR 0x100 -#define RTMGRP_IPV6_MROUTE 0x200 -#define RTMGRP_IPV6_ROUTE 0x400 -#define RTMGRP_IPV6_IFINFO 0x800 - -#define RTMGRP_DECnet_IFADDR 0x1000 -#define RTMGRP_DECnet_ROUTE 0x4000 - -#define RTMGRP_IPV6_PREFIX 0x20000 -#endif - -/* RTnetlink multicast groups */ -enum rtnetlink_groups { - RTNLGRP_NONE, -#define RTNLGRP_NONE RTNLGRP_NONE - RTNLGRP_LINK, -#define RTNLGRP_LINK RTNLGRP_LINK - RTNLGRP_NOTIFY, -#define RTNLGRP_NOTIFY RTNLGRP_NOTIFY - RTNLGRP_NEIGH, -#define RTNLGRP_NEIGH RTNLGRP_NEIGH - RTNLGRP_TC, -#define RTNLGRP_TC RTNLGRP_TC - RTNLGRP_IPV4_IFADDR, -#define RTNLGRP_IPV4_IFADDR RTNLGRP_IPV4_IFADDR - RTNLGRP_IPV4_MROUTE, -#define RTNLGRP_IPV4_MROUTE RTNLGRP_IPV4_MROUTE - RTNLGRP_IPV4_ROUTE, -#define RTNLGRP_IPV4_ROUTE RTNLGRP_IPV4_ROUTE - RTNLGRP_IPV4_RULE, -#define RTNLGRP_IPV4_RULE RTNLGRP_IPV4_RULE - RTNLGRP_IPV6_IFADDR, -#define RTNLGRP_IPV6_IFADDR RTNLGRP_IPV6_IFADDR - RTNLGRP_IPV6_MROUTE, -#define RTNLGRP_IPV6_MROUTE RTNLGRP_IPV6_MROUTE - RTNLGRP_IPV6_ROUTE, -#define RTNLGRP_IPV6_ROUTE RTNLGRP_IPV6_ROUTE - RTNLGRP_IPV6_IFINFO, -#define RTNLGRP_IPV6_IFINFO RTNLGRP_IPV6_IFINFO - RTNLGRP_DECnet_IFADDR, -#define RTNLGRP_DECnet_IFADDR RTNLGRP_DECnet_IFADDR - RTNLGRP_NOP2, - RTNLGRP_DECnet_ROUTE, -#define RTNLGRP_DECnet_ROUTE RTNLGRP_DECnet_ROUTE - RTNLGRP_DECnet_RULE, -#define RTNLGRP_DECnet_RULE RTNLGRP_DECnet_RULE - RTNLGRP_NOP4, - RTNLGRP_IPV6_PREFIX, -#define RTNLGRP_IPV6_PREFIX RTNLGRP_IPV6_PREFIX - RTNLGRP_IPV6_RULE, -#define RTNLGRP_IPV6_RULE RTNLGRP_IPV6_RULE - RTNLGRP_ND_USEROPT, -#define RTNLGRP_ND_USEROPT RTNLGRP_ND_USEROPT - RTNLGRP_PHONET_IFADDR, -#define RTNLGRP_PHONET_IFADDR RTNLGRP_PHONET_IFADDR - RTNLGRP_PHONET_ROUTE, -#define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE - RTNLGRP_DCB, -#define RTNLGRP_DCB RTNLGRP_DCB - __RTNLGRP_MAX -}; -#define RTNLGRP_MAX (__RTNLGRP_MAX - 1) - -/* TC action piece */ -struct tcamsg { - unsigned char tca_family; - unsigned char tca__pad1; - unsigned short tca__pad2; -}; -#define TA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg)))) -#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg)) -#define TCA_ACT_TAB 1 /* attr type must be >=1 */ -#define TCAA_MAX 1 - -/* New extended info filters for IFLA_EXT_MASK */ -#define RTEXT_FILTER_VF (1 << 0) - -/* End of information exported to user level */ - -#ifdef __KERNEL__ #include #include +#include extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo); extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid); @@ -675,7 +69,4 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, int idx); -#endif /* __KERNEL__ */ - - #endif /* __LINUX_RTNETLINK_H */ diff --git a/include/linux/scc.h b/include/linux/scc.h index 3495bd953cc6..c5a004962679 100644 --- a/include/linux/scc.h +++ b/include/linux/scc.h @@ -1,175 +1,9 @@ /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */ - #ifndef _SCC_H #define _SCC_H +#include -/* selection of hardware types */ - -#define PA0HZP 0x00 /* hardware type for PA0HZP SCC card and compatible */ -#define EAGLE 0x01 /* hardware type for EAGLE card */ -#define PC100 0x02 /* hardware type for PC100 card */ -#define PRIMUS 0x04 /* hardware type for PRIMUS-PC (DG9BL) card */ -#define DRSI 0x08 /* hardware type for DRSI PC*Packet card */ -#define BAYCOM 0x10 /* hardware type for BayCom (U)SCC */ - -/* DEV ioctl() commands */ - -enum SCC_ioctl_cmds { - SIOCSCCRESERVED = SIOCDEVPRIVATE, - SIOCSCCCFG, - SIOCSCCINI, - SIOCSCCCHANINI, - SIOCSCCSMEM, - SIOCSCCGKISS, - SIOCSCCSKISS, - SIOCSCCGSTAT, - SIOCSCCCAL -}; - -/* Device parameter control (from WAMPES) */ - -enum L1_params { - PARAM_DATA, - PARAM_TXDELAY, - PARAM_PERSIST, - PARAM_SLOTTIME, - PARAM_TXTAIL, - PARAM_FULLDUP, - PARAM_SOFTDCD, /* was: PARAM_HW */ - PARAM_MUTE, /* ??? */ - PARAM_DTR, - PARAM_RTS, - PARAM_SPEED, - PARAM_ENDDELAY, /* ??? */ - PARAM_GROUP, - PARAM_IDLE, - PARAM_MIN, - PARAM_MAXKEY, - PARAM_WAIT, - PARAM_MAXDEFER, - PARAM_TX, - PARAM_HWEVENT = 31, - PARAM_RETURN = 255 /* reset kiss mode */ -}; - -/* fulldup parameter */ - -enum FULLDUP_modes { - KISS_DUPLEX_HALF, /* normal CSMA operation */ - KISS_DUPLEX_FULL, /* fullduplex, key down trx after transmission */ - KISS_DUPLEX_LINK, /* fullduplex, key down trx after 'idletime' sec */ - KISS_DUPLEX_OPTIMA /* fullduplex, let the protocol layer control the hw */ -}; - -/* misc. parameters */ - -#define TIMER_OFF 65535U /* to switch off timers */ -#define NO_SUCH_PARAM 65534U /* param not implemented */ - -/* HWEVENT parameter */ - -enum HWEVENT_opts { - HWEV_DCD_ON, - HWEV_DCD_OFF, - HWEV_ALL_SENT -}; - -/* channel grouping */ - -#define RXGROUP 0100 /* if set, only tx when all channels clear */ -#define TXGROUP 0200 /* if set, don't transmit simultaneously */ - -/* Tx/Rx clock sources */ - -enum CLOCK_sources { - CLK_DPLL, /* normal halfduplex operation */ - CLK_EXTERNAL, /* external clocking (G3RUH/DF9IC modems) */ - CLK_DIVIDER, /* Rx = DPLL, Tx = divider (fullduplex with */ - /* modems without clock regeneration */ - CLK_BRG /* experimental fullduplex mode with DPLL/BRG for */ - /* MODEMs without clock recovery */ -}; - -/* Tx state */ - -enum TX_state { - TXS_IDLE, /* Transmitter off, no data pending */ - TXS_BUSY, /* waiting for permission to send / tailtime */ - TXS_ACTIVE, /* Transmitter on, sending data */ - TXS_NEWFRAME, /* reset CRC and send (next) frame */ - TXS_IDLE2, /* Transmitter on, no data pending */ - TXS_WAIT, /* Waiting for Mintime to expire */ - TXS_TIMEOUT /* We had a transmission timeout */ -}; - -typedef unsigned long io_port; /* type definition for an 'io port address' */ - -/* SCC statistical information */ - -struct scc_stat { - long rxints; /* Receiver interrupts */ - long txints; /* Transmitter interrupts */ - long exints; /* External/status interrupts */ - long spints; /* Special receiver interrupts */ - - long txframes; /* Packets sent */ - long rxframes; /* Number of Frames Actually Received */ - long rxerrs; /* CRC Errors */ - long txerrs; /* KISS errors */ - - unsigned int nospace; /* "Out of buffers" */ - unsigned int rx_over; /* Receiver Overruns */ - unsigned int tx_under; /* Transmitter Underruns */ - - unsigned int tx_state; /* Transmitter state */ - int tx_queued; /* tx frames enqueued */ - - unsigned int maxqueue; /* allocated tx_buffers */ - unsigned int bufsize; /* used buffersize */ -}; - -struct scc_modem { - long speed; /* Line speed, bps */ - char clocksrc; /* 0 = DPLL, 1 = external, 2 = divider */ - char nrz; /* NRZ instead of NRZI */ -}; - -struct scc_kiss_cmd { - int command; /* one of the KISS-Commands defined above */ - unsigned param; /* KISS-Param */ -}; - -struct scc_hw_config { - io_port data_a; /* data port channel A */ - io_port ctrl_a; /* control port channel A */ - io_port data_b; /* data port channel B */ - io_port ctrl_b; /* control port channel B */ - io_port vector_latch; /* INTACK-Latch (#) */ - io_port special; /* special function port */ - - int irq; /* irq */ - long clock; /* clock */ - char option; /* command for function port */ - - char brand; /* hardware type */ - char escc; /* use ext. features of a 8580/85180/85280 */ -}; - -/* (#) only one INTACK latch allowed. */ - - -struct scc_mem_config { - unsigned int dummy; - unsigned int bufsize; -}; - -struct scc_calibrate { - unsigned int time; - unsigned char pattern; -}; - -#ifdef __KERNEL__ enum {TX_OFF, TX_ON}; /* command for scc_key_trx() */ @@ -248,5 +82,4 @@ struct scc_channel { spinlock_t lock; /* Channel guard lock */ }; -#endif /* defined(__KERNEL__) */ #endif /* defined(_SCC_H) */ diff --git a/include/linux/sched.h b/include/linux/sched.h index a83ca5816ecb..0dd42a02df2e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1,48 +1,8 @@ #ifndef _LINUX_SCHED_H #define _LINUX_SCHED_H -/* - * cloning flags: - */ -#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */ -#define CLONE_VM 0x00000100 /* set if VM shared between processes */ -#define CLONE_FS 0x00000200 /* set if fs info shared between processes */ -#define CLONE_FILES 0x00000400 /* set if open files shared between processes */ -#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */ -#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */ -#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */ -#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */ -#define CLONE_THREAD 0x00010000 /* Same thread group? */ -#define CLONE_NEWNS 0x00020000 /* New namespace group? */ -#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */ -#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */ -#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */ -#define CLONE_CHILD_CLEARTID 0x00200000 /* clear the TID in the child */ -#define CLONE_DETACHED 0x00400000 /* Unused, ignored */ -#define CLONE_UNTRACED 0x00800000 /* set if the tracing process can't force CLONE_PTRACE on this clone */ -#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */ -/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state) - and is now available for re-use. */ -#define CLONE_NEWUTS 0x04000000 /* New utsname group? */ -#define CLONE_NEWIPC 0x08000000 /* New ipcs */ -#define CLONE_NEWUSER 0x10000000 /* New user namespace */ -#define CLONE_NEWPID 0x20000000 /* New pid namespace */ -#define CLONE_NEWNET 0x40000000 /* New network namespace */ -#define CLONE_IO 0x80000000 /* Clone io context */ - -/* - * Scheduling policies - */ -#define SCHED_NORMAL 0 -#define SCHED_FIFO 1 -#define SCHED_RR 2 -#define SCHED_BATCH 3 -/* SCHED_ISO: reserved but not implemented yet */ -#define SCHED_IDLE 5 -/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */ -#define SCHED_RESET_ON_FORK 0x40000000 +#include -#ifdef __KERNEL__ struct sched_param { int sched_priority; @@ -2828,6 +2788,4 @@ static inline unsigned long rlimit_max(unsigned int limit) return task_rlimit_max(current, limit); } -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h index fb3c5a8fef3d..005bf3e38db5 100644 --- a/include/linux/screen_info.h +++ b/include/linux/screen_info.h @@ -1,76 +1,8 @@ #ifndef _SCREEN_INFO_H #define _SCREEN_INFO_H -#include +#include -/* - * These are set up by the setup-routine at boot-time: - */ - -struct screen_info { - __u8 orig_x; /* 0x00 */ - __u8 orig_y; /* 0x01 */ - __u16 ext_mem_k; /* 0x02 */ - __u16 orig_video_page; /* 0x04 */ - __u8 orig_video_mode; /* 0x06 */ - __u8 orig_video_cols; /* 0x07 */ - __u8 flags; /* 0x08 */ - __u8 unused2; /* 0x09 */ - __u16 orig_video_ega_bx;/* 0x0a */ - __u16 unused3; /* 0x0c */ - __u8 orig_video_lines; /* 0x0e */ - __u8 orig_video_isVGA; /* 0x0f */ - __u16 orig_video_points;/* 0x10 */ - - /* VESA graphic mode -- linear frame buffer */ - __u16 lfb_width; /* 0x12 */ - __u16 lfb_height; /* 0x14 */ - __u16 lfb_depth; /* 0x16 */ - __u32 lfb_base; /* 0x18 */ - __u32 lfb_size; /* 0x1c */ - __u16 cl_magic, cl_offset; /* 0x20 */ - __u16 lfb_linelength; /* 0x24 */ - __u8 red_size; /* 0x26 */ - __u8 red_pos; /* 0x27 */ - __u8 green_size; /* 0x28 */ - __u8 green_pos; /* 0x29 */ - __u8 blue_size; /* 0x2a */ - __u8 blue_pos; /* 0x2b */ - __u8 rsvd_size; /* 0x2c */ - __u8 rsvd_pos; /* 0x2d */ - __u16 vesapm_seg; /* 0x2e */ - __u16 vesapm_off; /* 0x30 */ - __u16 pages; /* 0x32 */ - __u16 vesa_attributes; /* 0x34 */ - __u32 capabilities; /* 0x36 */ - __u8 _reserved[6]; /* 0x3a */ -} __attribute__((packed)); - -#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */ -#define VIDEO_TYPE_CGA 0x11 /* CGA Display */ -#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */ -#define VIDEO_TYPE_EGAC 0x21 /* EGA in Color Mode */ -#define VIDEO_TYPE_VGAC 0x22 /* VGA+ in Color Mode */ -#define VIDEO_TYPE_VLFB 0x23 /* VESA VGA in graphic mode */ - -#define VIDEO_TYPE_PICA_S3 0x30 /* ACER PICA-61 local S3 video */ -#define VIDEO_TYPE_MIPS_G364 0x31 /* MIPS Magnum 4000 G364 video */ -#define VIDEO_TYPE_SGI 0x33 /* Various SGI graphics hardware */ - -#define VIDEO_TYPE_TGAC 0x40 /* DEC TGA */ - -#define VIDEO_TYPE_SUN 0x50 /* Sun frame buffer. */ -#define VIDEO_TYPE_SUNPCI 0x51 /* Sun PCI based frame buffer. */ - -#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */ - -#define VIDEO_TYPE_EFI 0x70 /* EFI graphic mode */ - -#define VIDEO_FLAGS_NOCURSOR (1 << 0) /* The video mode has no cursor set */ - -#define VIDEO_CAPABILITY_SKIP_QUIRKS (1 << 0) - -#ifdef __KERNEL__ extern struct screen_info screen_info; #define ORIG_X (screen_info.orig_x) @@ -81,6 +13,4 @@ extern struct screen_info screen_info; #define ORIG_VIDEO_LINES (screen_info.orig_video_lines) #define ORIG_VIDEO_ISVGA (screen_info.orig_video_isVGA) #define ORIG_VIDEO_POINTS (screen_info.orig_video_points) -#endif /* __KERNEL__ */ - #endif /* _SCREEN_INFO_H */ diff --git a/include/linux/sdla.h b/include/linux/sdla.h index 9995c7fc3f60..fe7a967d7de4 100644 --- a/include/linux/sdla.h +++ b/include/linux/sdla.h @@ -19,100 +19,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef SDLA_H #define SDLA_H -/* adapter type */ -#define SDLA_TYPES -#define SDLA_S502A 5020 -#define SDLA_S502E 5021 -#define SDLA_S503 5030 -#define SDLA_S507 5070 -#define SDLA_S508 5080 -#define SDLA_S509 5090 -#define SDLA_UNKNOWN -1 - -/* port selection flags for the S508 */ -#define SDLA_S508_PORT_V35 0x00 -#define SDLA_S508_PORT_RS232 0x02 - -/* Z80 CPU speeds */ -#define SDLA_CPU_3M 0x00 -#define SDLA_CPU_5M 0x01 -#define SDLA_CPU_7M 0x02 -#define SDLA_CPU_8M 0x03 -#define SDLA_CPU_10M 0x04 -#define SDLA_CPU_16M 0x05 -#define SDLA_CPU_12M 0x06 - -/* some private IOCTLs */ -#define SDLA_IDENTIFY (FRAD_LAST_IOCTL + 1) -#define SDLA_CPUSPEED (FRAD_LAST_IOCTL + 2) -#define SDLA_PROTOCOL (FRAD_LAST_IOCTL + 3) - -#define SDLA_CLEARMEM (FRAD_LAST_IOCTL + 4) -#define SDLA_WRITEMEM (FRAD_LAST_IOCTL + 5) -#define SDLA_READMEM (FRAD_LAST_IOCTL + 6) - -struct sdla_mem { - int addr; - int len; - void __user *data; -}; - -#define SDLA_START (FRAD_LAST_IOCTL + 7) -#define SDLA_STOP (FRAD_LAST_IOCTL + 8) +#include -/* some offsets in the Z80's memory space */ -#define SDLA_NMIADDR 0x0000 -#define SDLA_CONF_ADDR 0x0010 -#define SDLA_S502A_NMIADDR 0x0066 -#define SDLA_CODE_BASEADDR 0x0100 -#define SDLA_WINDOW_SIZE 0x2000 -#define SDLA_ADDR_MASK 0x1FFF - -/* largest handleable block of data */ -#define SDLA_MAX_DATA 4080 -#define SDLA_MAX_MTU 4072 /* MAX_DATA - sizeof(fradhdr) */ -#define SDLA_MAX_DLCI 24 - -/* this should be the same as frad_conf */ -struct sdla_conf { - short station; - short config; - short kbaud; - short clocking; - short max_frm; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; -}; - -/* this should be the same as dlci_conf */ -struct sdla_dlci_conf { - short config; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; -}; - -#ifdef __KERNEL__ /* important Z80 window addresses */ #define SDLA_CONTROL_WND 0xE000 @@ -331,5 +242,3 @@ struct buf_entry { } __attribute__((packed)); #endif - -#endif diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 84f6320da50f..6f19cfd1840e 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -1,50 +1,8 @@ #ifndef _LINUX_SECCOMP_H #define _LINUX_SECCOMP_H -#include -#include +#include - -/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, ) */ -#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */ -#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */ -#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ - -/* - * All BPF programs must return a 32-bit value. - * The bottom 16-bits are for optional return data. - * The upper 16-bits are ordered from least permissive values to most. - * - * The ordering ensures that a min_t() over composed return values always - * selects the least permissive choice. - */ -#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ -#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ -#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ -#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ -#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ - -/* Masks for the return value sections. */ -#define SECCOMP_RET_ACTION 0x7fff0000U -#define SECCOMP_RET_DATA 0x0000ffffU - -/** - * struct seccomp_data - the format the BPF program executes over. - * @nr: the system call number - * @arch: indicates system call convention as an AUDIT_ARCH_* value - * as defined in . - * @instruction_pointer: at the time of the system call. - * @args: up to 6 system call arguments always stored as 64-bit values - * regardless of the architecture. - */ -struct seccomp_data { - int nr; - __u32 arch; - __u64 instruction_pointer; - __u64 args[6]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_SECCOMP #include @@ -129,5 +87,4 @@ static inline void get_seccomp_filter(struct task_struct *tsk) return; } #endif /* CONFIG_SECCOMP_FILTER */ -#endif /* __KERNEL__ */ #endif /* _LINUX_SECCOMP_H */ diff --git a/include/linux/securebits.h b/include/linux/securebits.h index 33406174cbe8..da1b33b33af7 100644 --- a/include/linux/securebits.h +++ b/include/linux/securebits.h @@ -1,54 +1,7 @@ #ifndef _LINUX_SECUREBITS_H #define _LINUX_SECUREBITS_H 1 -/* Each securesetting is implemented using two bits. One bit specifies - whether the setting is on or off. The other bit specify whether the - setting is locked or not. A setting which is locked cannot be - changed from user-level. */ -#define issecure_mask(X) (1 << (X)) -#ifdef __KERNEL__ -#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits)) -#endif - -#define SECUREBITS_DEFAULT 0x00000000 - -/* When set UID 0 has no special privileges. When unset, we support - inheritance of root-permissions and suid-root executable under - compatibility mode. We raise the effective and inheritable bitmasks - *of the executable file* if the effective uid of the new process is - 0. If the real uid is 0, we raise the effective (legacy) bit of the - executable file. */ -#define SECURE_NOROOT 0 -#define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ - -#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT)) -#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED)) - -/* When set, setuid to/from uid 0 does not trigger capability-"fixup". - When unset, to provide compatiblility with old programs relying on - set*uid to gain/lose privilege, transitions to/from uid 0 cause - capabilities to be gained/lost. */ -#define SECURE_NO_SETUID_FIXUP 2 -#define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ - -#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP)) -#define SECBIT_NO_SETUID_FIXUP_LOCKED \ - (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED)) - -/* When set, a process can retain its capabilities even after - transitioning to a non-root user (the set-uid fixup suppressed by - bit 2). Bit-4 is cleared when a process calls exec(); setting both - bit 4 and 5 will create a barrier through exec that no exec()'d - child can use this feature again. */ -#define SECURE_KEEP_CAPS 4 -#define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ - -#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS)) -#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED)) - -#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \ - issecure_mask(SECURE_NO_SETUID_FIXUP) | \ - issecure_mask(SECURE_KEEP_CAPS)) -#define SECURE_ALL_LOCKS (SECURE_ALL_BITS << 1) +#include +#define issecure(X) (issecure_mask(X) & current_cred_xxx(securebits)) #endif /* !_LINUX_SECUREBITS_H */ diff --git a/include/linux/selinux_netlink.h b/include/linux/selinux_netlink.h deleted file mode 100644 index d239797785cf..000000000000 --- a/include/linux/selinux_netlink.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Netlink event notifications for SELinux. - * - * Author: James Morris - * - * Copyright (C) 2004 Red Hat, Inc., James Morris - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, - * as published by the Free Software Foundation. - */ -#ifndef _LINUX_SELINUX_NETLINK_H -#define _LINUX_SELINUX_NETLINK_H - -#include - -/* Message types. */ -#define SELNL_MSG_BASE 0x10 -enum { - SELNL_MSG_SETENFORCE = SELNL_MSG_BASE, - SELNL_MSG_POLICYLOAD, - SELNL_MSG_MAX -}; - -#ifndef __KERNEL__ -/* Multicast groups - backwards compatiblility for userspace */ -#define SELNL_GRP_NONE 0x00000000 -#define SELNL_GRP_AVC 0x00000001 /* AVC notifications */ -#define SELNL_GRP_ALL 0xffffffff -#endif - -enum selinux_nlgroups { - SELNLGRP_NONE, -#define SELNLGRP_NONE SELNLGRP_NONE - SELNLGRP_AVC, -#define SELNLGRP_AVC SELNLGRP_AVC - __SELNLGRP_MAX -}; -#define SELNLGRP_MAX (__SELNLGRP_MAX - 1) - -/* Message structures */ -struct selnl_msg_setenforce { - __s32 val; -}; - -struct selnl_msg_policyload { - __u32 seqno; -}; - -#endif /* _LINUX_SELINUX_NETLINK_H */ diff --git a/include/linux/sem.h b/include/linux/sem.h index 10d6b226afc5..53d42650b193 100644 --- a/include/linux/sem.h +++ b/include/linux/sem.h @@ -1,85 +1,10 @@ #ifndef _LINUX_SEM_H #define _LINUX_SEM_H -#include - -/* semop flags */ -#define SEM_UNDO 0x1000 /* undo the operation on exit */ - -/* semctl Command Definitions. */ -#define GETPID 11 /* get sempid */ -#define GETVAL 12 /* get semval */ -#define GETALL 13 /* get all semval's */ -#define GETNCNT 14 /* get semncnt */ -#define GETZCNT 15 /* get semzcnt */ -#define SETVAL 16 /* set semval */ -#define SETALL 17 /* set all semval's */ - -/* ipcs ctl cmds */ -#define SEM_STAT 18 -#define SEM_INFO 19 - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct semid_ds { - struct ipc_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - __kernel_time_t sem_ctime; /* last change time */ - struct sem *sem_base; /* ptr to first semaphore in array */ - struct sem_queue *sem_pending; /* pending operations to be processed */ - struct sem_queue **sem_pending_last; /* last pending operation */ - struct sem_undo *undo; /* undo requests on this array */ - unsigned short sem_nsems; /* no. of semaphores in array */ -}; - -/* Include the definition of semid64_ds */ -#include - -/* semop system calls takes an array of these. */ -struct sembuf { - unsigned short sem_num; /* semaphore index in array */ - short sem_op; /* semaphore operation */ - short sem_flg; /* operation flags */ -}; - -/* arg for semctl system calls. */ -union semun { - int val; /* value for SETVAL */ - struct semid_ds __user *buf; /* buffer for IPC_STAT & IPC_SET */ - unsigned short __user *array; /* array for GETALL & SETALL */ - struct seminfo __user *__buf; /* buffer for IPC_INFO */ - void __user *__pad; -}; - -struct seminfo { - int semmap; - int semmni; - int semmns; - int semmnu; - int semmsl; - int semopm; - int semume; - int semusz; - int semvmx; - int semaem; -}; - -#define SEMMNI 128 /* <= IPCMNI max # of semaphore identifiers */ -#define SEMMSL 250 /* <= 8 000 max num of semaphores per id */ -#define SEMMNS (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */ -#define SEMOPM 32 /* <= 1 000 max num of ops per semop call */ -#define SEMVMX 32767 /* <= 32767 semaphore maximum value */ -#define SEMAEM SEMVMX /* adjust on exit max value */ - -/* unused */ -#define SEMUME SEMOPM /* max num of undo entries per process */ -#define SEMMNU SEMMNS /* num of undo structures system wide */ -#define SEMMAP SEMMNS /* # of entries in semaphore map */ -#define SEMUSZ 20 /* sizeof struct sem_undo */ - -#ifdef __KERNEL__ #include #include #include +#include struct task_struct; @@ -122,6 +47,4 @@ static inline void exit_sem(struct task_struct *tsk) } #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_SEM_H */ diff --git a/include/linux/serial.h b/include/linux/serial.h index 861e51de476b..0916107c77f9 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -6,16 +6,11 @@ * Redistribution of this file is permitted under the terms of the GNU * Public License (GPL) */ - #ifndef _LINUX_SERIAL_H #define _LINUX_SERIAL_H -#include - -#include - -#ifdef __KERNEL__ #include +#include /* @@ -33,118 +28,6 @@ struct async_icount { */ #define SERIAL_XMIT_SIZE PAGE_SIZE -#endif - -struct serial_struct { - int type; - int line; - unsigned int port; - int irq; - int flags; - int xmit_fifo_size; - int custom_divisor; - int baud_base; - unsigned short close_delay; - char io_type; - char reserved_char[1]; - int hub6; - unsigned short closing_wait; /* time to wait before closing */ - unsigned short closing_wait2; /* no longer used... */ - unsigned char *iomem_base; - unsigned short iomem_reg_shift; - unsigned int port_high; - unsigned long iomap_base; /* cookie passed into ioremap */ -}; - -/* - * For the close wait times, 0 means wait forever for serial port to - * flush its output. 65535 means don't wait at all. - */ -#define ASYNC_CLOSING_WAIT_INF 0 -#define ASYNC_CLOSING_WAIT_NONE 65535 - -/* - * These are the supported serial types. - */ -#define PORT_UNKNOWN 0 -#define PORT_8250 1 -#define PORT_16450 2 -#define PORT_16550 3 -#define PORT_16550A 4 -#define PORT_CIRRUS 5 /* usurped by cyclades.c */ -#define PORT_16650 6 -#define PORT_16650V2 7 -#define PORT_16750 8 -#define PORT_STARTECH 9 /* usurped by cyclades.c */ -#define PORT_16C950 10 /* Oxford Semiconductor */ -#define PORT_16654 11 -#define PORT_16850 12 -#define PORT_RSA 13 /* RSA-DV II/S card */ -#define PORT_MAX 13 - -#define SERIAL_IO_PORT 0 -#define SERIAL_IO_HUB6 1 -#define SERIAL_IO_MEM 2 - -#define UART_CLEAR_FIFO 0x01 -#define UART_USE_FIFO 0x02 -#define UART_STARTECH 0x04 -#define UART_NATSEMI 0x08 - - -/* - * Multiport serial configuration structure --- external structure - */ -struct serial_multiport_struct { - int irq; - int port1; - unsigned char mask1, match1; - int port2; - unsigned char mask2, match2; - int port3; - unsigned char mask3, match3; - int port4; - unsigned char mask4, match4; - int port_monitor; - int reserved[32]; -}; - -/* - * Serial input interrupt line counters -- external structure - * Four lines can interrupt: CTS, DSR, RI, DCD - */ -struct serial_icounter_struct { - int cts, dsr, rng, dcd; - int rx, tx; - int frame, overrun, parity, brk; - int buf_overrun; - int reserved[9]; -}; - -/* - * Serial interface for controlling RS485 settings on chips with suitable - * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your - * platform. The set function returns the new state, with any unsupported bits - * reverted appropriately. - */ - -struct serial_rs485 { - __u32 flags; /* RS485 feature flags */ -#define SER_RS485_ENABLED (1 << 0) /* If enabled */ -#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for - RTS pin when - sending */ -#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for - RTS pin after sent*/ -#define SER_RS485_RX_DURING_TX (1 << 4) - __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ - __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ - __u32 padding[5]; /* Memory is cheap, new structs - are a royal PITA .. */ -}; - -#ifdef __KERNEL__ #include -#endif /* __KERNEL__ */ #endif /* _LINUX_SERIAL_H */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f9b22ec7a9f3..3c430228d232 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -20,202 +20,6 @@ #ifndef LINUX_SERIAL_CORE_H #define LINUX_SERIAL_CORE_H -#include - -/* - * The type definitions. These are from Ted Ts'o's serial.h - */ -#define PORT_UNKNOWN 0 -#define PORT_8250 1 -#define PORT_16450 2 -#define PORT_16550 3 -#define PORT_16550A 4 -#define PORT_CIRRUS 5 -#define PORT_16650 6 -#define PORT_16650V2 7 -#define PORT_16750 8 -#define PORT_STARTECH 9 -#define PORT_16C950 10 -#define PORT_16654 11 -#define PORT_16850 12 -#define PORT_RSA 13 -#define PORT_NS16550A 14 -#define PORT_XSCALE 15 -#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ -#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ -#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ -#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ -#define PORT_XR17D15X 21 /* Exar XR17D15x UART */ -#define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ -#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ - -/* - * ARM specific type numbers. These are not currently guaranteed - * to be implemented, and will change in the future. These are - * separate so any additions to the old serial.c that occur before - * we are merged can be easily merged here. - */ -#define PORT_PXA 31 -#define PORT_AMBA 32 -#define PORT_CLPS711X 33 -#define PORT_SA1100 34 -#define PORT_UART00 35 -#define PORT_21285 37 - -/* Sparc type numbers. */ -#define PORT_SUNZILOG 38 -#define PORT_SUNSAB 39 - -/* DEC */ -#define PORT_DZ 46 -#define PORT_ZS 47 - -/* Parisc type numbers. */ -#define PORT_MUX 48 - -/* Atmel AT91 / AT32 SoC */ -#define PORT_ATMEL 49 - -/* Macintosh Zilog type numbers */ -#define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ -#define PORT_PMAC_ZILOG 51 - -/* SH-SCI */ -#define PORT_SCI 52 -#define PORT_SCIF 53 -#define PORT_IRDA 54 - -/* Samsung S3C2410 SoC and derivatives thereof */ -#define PORT_S3C2410 55 - -/* SGI IP22 aka Indy / Challenge S / Indigo 2 */ -#define PORT_IP22ZILOG 56 - -/* Sharp LH7a40x -- an ARM9 SoC series */ -#define PORT_LH7A40X 57 - -/* PPC CPM type number */ -#define PORT_CPM 58 - -/* MPC52xx (and MPC512x) type numbers */ -#define PORT_MPC52xx 59 - -/* IBM icom */ -#define PORT_ICOM 60 - -/* Samsung S3C2440 SoC */ -#define PORT_S3C2440 61 - -/* Motorola i.MX SoC */ -#define PORT_IMX 62 - -/* Marvell MPSC */ -#define PORT_MPSC 63 - -/* TXX9 type number */ -#define PORT_TXX9 64 - -/* NEC VR4100 series SIU/DSIU */ -#define PORT_VR41XX_SIU 65 -#define PORT_VR41XX_DSIU 66 - -/* Samsung S3C2400 SoC */ -#define PORT_S3C2400 67 - -/* M32R SIO */ -#define PORT_M32R_SIO 68 - -/*Digi jsm */ -#define PORT_JSM 69 - -#define PORT_PNX8XXX 70 - -/* Hilscher netx */ -#define PORT_NETX 71 - -/* SUN4V Hypervisor Console */ -#define PORT_SUNHV 72 - -#define PORT_S3C2412 73 - -/* Xilinx uartlite */ -#define PORT_UARTLITE 74 - -/* Blackfin bf5xx */ -#define PORT_BFIN 75 - -/* Micrel KS8695 */ -#define PORT_KS8695 76 - -/* Broadcom SB1250, etc. SOC */ -#define PORT_SB1250_DUART 77 - -/* Freescale ColdFire */ -#define PORT_MCF 78 - -/* Blackfin SPORT */ -#define PORT_BFIN_SPORT 79 - -/* MN10300 on-chip UART numbers */ -#define PORT_MN10300 80 -#define PORT_MN10300_CTS 81 - -#define PORT_SC26XX 82 - -/* SH-SCI */ -#define PORT_SCIFA 83 - -#define PORT_S3C6400 84 - -/* NWPSERIAL */ -#define PORT_NWPSERIAL 85 - -/* MAX3100 */ -#define PORT_MAX3100 86 - -/* Timberdale UART */ -#define PORT_TIMBUART 87 - -/* Qualcomm MSM SoCs */ -#define PORT_MSM 88 - -/* BCM63xx family SoCs */ -#define PORT_BCM63XX 89 - -/* Aeroflex Gaisler GRLIB APBUART */ -#define PORT_APBUART 90 - -/* Altera UARTs */ -#define PORT_ALTERA_JTAGUART 91 -#define PORT_ALTERA_UART 92 - -/* SH-SCI */ -#define PORT_SCIFB 93 - -/* MAX310X */ -#define PORT_MAX310X 94 - -/* High Speed UART for Medfield */ -#define PORT_MFD 95 - -/* TI OMAP-UART */ -#define PORT_OMAP 96 - -/* VIA VT8500 SoC */ -#define PORT_VT8500 97 - -/* Xilinx PSS UART */ -#define PORT_XUARTPS 98 - -/* Atheros AR933X SoC */ -#define PORT_AR933X 99 - -/* Energy Micro efm32 SoC */ -#define PORT_EFMUART 100 - -#ifdef __KERNEL__ #include #include @@ -226,6 +30,7 @@ #include #include #include +#include struct uart_port; struct serial_struct; @@ -562,6 +367,4 @@ static inline int uart_handle_break(struct uart_port *port) (cflag) & CRTSCTS || \ !((cflag) & CLOCAL)) -#endif - #endif /* LINUX_SERIAL_CORE_H */ diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h deleted file mode 100644 index 5ed325e88a81..000000000000 --- a/include/linux/serial_reg.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * include/linux/serial_reg.h - * - * Copyright (C) 1992, 1994 by Theodore Ts'o. - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - * - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#ifndef _LINUX_SERIAL_REG_H -#define _LINUX_SERIAL_REG_H - -/* - * DLAB=0 - */ -#define UART_RX 0 /* In: Receive buffer */ -#define UART_TX 0 /* Out: Transmit buffer */ - -#define UART_IER 1 /* Out: Interrupt Enable Register */ -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ -/* - * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 - */ -#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ - -#define UART_IIR 2 /* In: Interrupt ID Register */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ - -#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ -#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ -#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ - -#define UART_FCR 2 /* Out: FIFO Control Register */ -#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -/* - * Note: The FIFO trigger levels are chip specific: - * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11 - * PC16550D: 1 4 8 14 xx xx xx xx - * TI16C550A: 1 4 8 14 xx xx xx xx - * TI16C550C: 1 4 8 14 xx xx xx xx - * ST16C550: 1 4 8 14 xx xx xx xx - * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2 - * NS16C552: 1 4 8 14 xx xx xx xx - * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 - * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 - * TI16C752: 8 16 56 60 8 16 32 56 - * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA - */ -#define UART_FCR_R_TRIG_00 0x00 -#define UART_FCR_R_TRIG_01 0x40 -#define UART_FCR_R_TRIG_10 0x80 -#define UART_FCR_R_TRIG_11 0xc0 -#define UART_FCR_T_TRIG_00 0x00 -#define UART_FCR_T_TRIG_01 0x10 -#define UART_FCR_T_TRIG_10 0x20 -#define UART_FCR_T_TRIG_11 0x30 - -#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ -#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ -#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ -#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ -#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ -/* 16650 definitions */ -#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ -#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ -#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ -#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ -#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ -#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ -#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ -#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ -#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ - -#define UART_LCR 3 /* Out: Line Control Register */ -/* - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * Access to some registers depends on register access / configuration - * mode. - */ -#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */ -#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */ - -#define UART_MCR 4 /* Out: Modem Control Register */ -#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ -#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ -#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ -#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_MCR_OUT2 0x08 /* Out2 complement */ -#define UART_MCR_OUT1 0x04 /* Out1 complement */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ - -#define UART_LSR 5 /* In: Line Status Register */ -#define UART_LSR_FIFOE 0x80 /* Fifo error */ -#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -#define UART_LSR_FE 0x08 /* Frame error indicator */ -#define UART_LSR_PE 0x04 /* Parity error indicator */ -#define UART_LSR_OE 0x02 /* Overrun error indicator */ -#define UART_LSR_DR 0x01 /* Receiver data ready */ -#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ - -#define UART_MSR 6 /* In: Modem Status Register */ -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - -#define UART_SCR 7 /* I/O: Scratch Register */ - -/* - * DLAB=1 - */ -#define UART_DLL 0 /* Out: Divisor Latch Low */ -#define UART_DLM 1 /* Out: Divisor Latch High */ - -/* - * LCR=0xBF (or DLAB=1 for 16C660) - */ -#define UART_EFR 2 /* I/O: Extended Features Register */ -#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */ -#define UART_EFR_CTS 0x80 /* CTS flow control */ -#define UART_EFR_RTS 0x40 /* RTS flow control */ -#define UART_EFR_SCD 0x20 /* Special character detect */ -#define UART_EFR_ECB 0x10 /* Enhanced control bit */ -/* - * the low four bits control software flow control - */ - -/* - * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654 - */ -#define UART_XON1 4 /* I/O: Xon character 1 */ -#define UART_XON2 5 /* I/O: Xon character 2 */ -#define UART_XOFF1 6 /* I/O: Xoff character 1 */ -#define UART_XOFF2 7 /* I/O: Xoff character 2 */ - -/* - * EFR[4]=1 MCR[6]=1, TI16C752 - */ -#define UART_TI752_TCR 6 /* I/O: transmission control register */ -#define UART_TI752_TLR 7 /* I/O: trigger level register */ - -/* - * LCR=0xBF, XR16C85x - */ -#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels */ -/* - * These are the definitions for the Programmable Trigger Register - */ -#define UART_TRG_1 0x01 -#define UART_TRG_4 0x04 -#define UART_TRG_8 0x08 -#define UART_TRG_16 0x10 -#define UART_TRG_32 0x20 -#define UART_TRG_64 0x40 -#define UART_TRG_96 0x60 -#define UART_TRG_120 0x78 -#define UART_TRG_128 0x80 - -#define UART_FCTR 1 /* Feature Control Register */ -#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */ -#define UART_FCTR_RTS_4DELAY 0x01 -#define UART_FCTR_RTS_6DELAY 0x02 -#define UART_FCTR_RTS_8DELAY 0x03 -#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */ -#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */ -#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */ -#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */ -#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */ -#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */ -#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */ -#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */ -#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */ - -/* - * LCR=0xBF, FCTR[6]=1 - */ -#define UART_EMSR 7 /* Extended Mode Select Register */ -#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */ -#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */ - -/* - * The Intel XScale on-chip UARTs define these bits - */ -#define UART_IER_DMAE 0x80 /* DMA Requests Enable */ -#define UART_IER_UUE 0x40 /* UART Unit Enable */ -#define UART_IER_NRZE 0x20 /* NRZ coding Enable */ -#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */ - -#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ - -#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */ -#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */ -#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ -#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ - -/* - * Intel MID on-chip HSU (High Speed UART) defined bits - */ -#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ -#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ -#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ -#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ - -#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ -#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ -#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ -#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ - -#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ -#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ - -#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ -#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ - -/* - * These register definitions are for the 16C950 - */ -#define UART_ASR 0x01 /* Additional Status Register */ -#define UART_RFL 0x03 /* Receiver FIFO level */ -#define UART_TFL 0x04 /* Transmitter FIFO level */ -#define UART_ICR 0x05 /* Index Control Register */ - -/* The 16950 ICR registers */ -#define UART_ACR 0x00 /* Additional Control Register */ -#define UART_CPR 0x01 /* Clock Prescalar Register */ -#define UART_TCR 0x02 /* Times Clock Register */ -#define UART_CKS 0x03 /* Clock Select Register */ -#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */ -#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */ -#define UART_FCL 0x06 /* Flow Control Level Lower */ -#define UART_FCH 0x07 /* Flow Control Level Higher */ -#define UART_ID1 0x08 /* ID #1 */ -#define UART_ID2 0x09 /* ID #2 */ -#define UART_ID3 0x0A /* ID #3 */ -#define UART_REV 0x0B /* Revision */ -#define UART_CSR 0x0C /* Channel Software Reset */ -#define UART_NMR 0x0D /* Nine-bit Mode Register */ -#define UART_CTR 0xFF - -/* - * The 16C950 Additional Control Register - */ -#define UART_ACR_RXDIS 0x01 /* Receiver disable */ -#define UART_ACR_TXDIS 0x02 /* Transmitter disable */ -#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ -#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ -#define UART_ACR_ICRRD 0x40 /* ICR Read enable */ -#define UART_ACR_ASREN 0x80 /* Additional status enable */ - - - -/* - * These definitions are for the RSA-DV II/S card, from - * - * Kiyokazu SUTO - */ - -#define UART_RSA_BASE (-8) - -#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */ - -#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */ -#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */ -#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */ -#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */ - -#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */ - -#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */ -#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */ -#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */ -#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */ -#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */ - -#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */ - -#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */ -#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */ -#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */ -#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */ -#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */ -#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */ -#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */ -#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */ - -#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */ - -#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */ - -#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */ - -#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */ - -/* - * The RSA DSV/II board has two fixed clock frequencies. One is the - * standard rate, and the other is 8 times faster. - */ -#define SERIAL_RSA_BAUD_BASE (921600) -#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) - -/* - * Extra serial register definitions for the internal UARTs - * in TI OMAP processors. - */ -#define UART_OMAP_MDR1 0x08 /* Mode definition register */ -#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */ -#define UART_OMAP_SCR 0x10 /* Supplementary control register */ -#define UART_OMAP_SSR 0x11 /* Supplementary status register */ -#define UART_OMAP_EBLR 0x12 /* BOF length register */ -#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */ -#define UART_OMAP_MVER 0x14 /* Module version register */ -#define UART_OMAP_SYSC 0x15 /* System configuration register */ -#define UART_OMAP_SYSS 0x16 /* System status register */ -#define UART_OMAP_WER 0x17 /* Wake-up enable register */ - -/* - * These are the definitions for the MDR1 register - */ -#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ -#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ -#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ -#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ -#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ -#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ -#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ -#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ - -#endif /* _LINUX_SERIAL_REG_H */ - diff --git a/include/linux/serio.h b/include/linux/serio.h index 6d6cfd3e94a3..36aac733840a 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -1,6 +1,3 @@ -#ifndef _SERIO_H -#define _SERIO_H - /* * Copyright (C) 1999-2002 Vojtech Pavlik * @@ -8,12 +5,9 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _SERIO_H +#define _SERIO_H -#include - -#define SPIOCSTYPE _IOW('q', 0x01, unsigned long) - -#ifdef __KERNEL__ #include #include @@ -22,6 +16,7 @@ #include #include #include +#include struct serio { void *port_data; @@ -152,68 +147,3 @@ static inline void serio_continue_rx(struct serio *serio) } #endif - -/* - * bit masks for use in "interrupt" flags (3rd argument) - */ -#define SERIO_TIMEOUT 1 -#define SERIO_PARITY 2 -#define SERIO_FRAME 4 - -/* - * Serio types - */ -#define SERIO_XT 0x00 -#define SERIO_8042 0x01 -#define SERIO_RS232 0x02 -#define SERIO_HIL_MLC 0x03 -#define SERIO_PS_PSTHRU 0x05 -#define SERIO_8042_XL 0x06 - -/* - * Serio protocols - */ -#define SERIO_UNKNOWN 0x00 -#define SERIO_MSC 0x01 -#define SERIO_SUN 0x02 -#define SERIO_MS 0x03 -#define SERIO_MP 0x04 -#define SERIO_MZ 0x05 -#define SERIO_MZP 0x06 -#define SERIO_MZPP 0x07 -#define SERIO_VSXXXAA 0x08 -#define SERIO_SUNKBD 0x10 -#define SERIO_WARRIOR 0x18 -#define SERIO_SPACEORB 0x19 -#define SERIO_MAGELLAN 0x1a -#define SERIO_SPACEBALL 0x1b -#define SERIO_GUNZE 0x1c -#define SERIO_IFORCE 0x1d -#define SERIO_STINGER 0x1e -#define SERIO_NEWTON 0x1f -#define SERIO_STOWAWAY 0x20 -#define SERIO_H3600 0x21 -#define SERIO_PS2SER 0x22 -#define SERIO_TWIDKBD 0x23 -#define SERIO_TWIDJOY 0x24 -#define SERIO_HIL 0x25 -#define SERIO_SNES232 0x26 -#define SERIO_SEMTECH 0x27 -#define SERIO_LKKBD 0x28 -#define SERIO_ELO 0x29 -#define SERIO_MICROTOUCH 0x30 -#define SERIO_PENMOUNT 0x31 -#define SERIO_TOUCHRIGHT 0x32 -#define SERIO_TOUCHWIN 0x33 -#define SERIO_TAOSEVM 0x34 -#define SERIO_FUJITSU 0x35 -#define SERIO_ZHENHUA 0x36 -#define SERIO_INEXIO 0x37 -#define SERIO_TOUCHIT213 0x38 -#define SERIO_W8001 0x39 -#define SERIO_DYNAPRO 0x3a -#define SERIO_HAMPSHIRE 0x3b -#define SERIO_PS2MULT 0x3c -#define SERIO_TSC40 0x3d - -#endif diff --git a/include/linux/shm.h b/include/linux/shm.h index edd086883ccb..bcf8a6a3ec00 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -1,88 +1,11 @@ #ifndef _LINUX_SHM_H_ #define _LINUX_SHM_H_ -#include -#include -#ifdef __KERNEL__ #include -#else -#include -#endif - -/* - * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can - * be increased by sysctl - */ +#include -#define SHMMAX 0x2000000 /* max shared seg size (bytes) */ -#define SHMMIN 1 /* min shared seg size (bytes) */ -#define SHMMNI 4096 /* max num of segs system wide */ -#ifdef __KERNEL__ #define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */ -#else -#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16)) -#endif -#define SHMSEG SHMMNI /* max shared segs per process */ - -#ifdef __KERNEL__ #include -#endif - -/* Obsolete, used only for backwards compatibility and libc5 compiles */ -struct shmid_ds { - struct ipc_perm shm_perm; /* operation perms */ - int shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - __kernel_time_t shm_dtime; /* last detach time */ - __kernel_time_t shm_ctime; /* last change time */ - __kernel_ipc_pid_t shm_cpid; /* pid of creator */ - __kernel_ipc_pid_t shm_lpid; /* pid of last operator */ - unsigned short shm_nattch; /* no. of current attaches */ - unsigned short shm_unused; /* compatibility */ - void *shm_unused2; /* ditto - used by DIPC */ - void *shm_unused3; /* unused */ -}; - -/* Include the definition of shmid64_ds and shminfo64 */ -#include - -/* permission flag for shmget */ -#define SHM_R 0400 /* or S_IRUGO from */ -#define SHM_W 0200 /* or S_IWUGO from */ - -/* mode for attach */ -#define SHM_RDONLY 010000 /* read-only access */ -#define SHM_RND 020000 /* round attach address to SHMLBA boundary */ -#define SHM_REMAP 040000 /* take-over region on attach */ -#define SHM_EXEC 0100000 /* execution access */ - -/* super user shmctl commands */ -#define SHM_LOCK 11 -#define SHM_UNLOCK 12 - -/* ipcs ctl commands */ -#define SHM_STAT 13 -#define SHM_INFO 14 - -/* Obsolete, used only for backwards compatibility */ -struct shminfo { - int shmmax; - int shmmin; - int shmmni; - int shmseg; - int shmall; -}; - -struct shm_info { - int used_ids; - unsigned long shm_tot; /* total allocated shm */ - unsigned long shm_rss; /* total resident shm */ - unsigned long shm_swp; /* total swapped shm */ - unsigned long swap_attempts; - unsigned long swap_successes; -}; - -#ifdef __KERNEL__ struct shmid_kernel /* private to the kernel */ { struct kern_ipc_perm shm_perm; @@ -127,6 +50,4 @@ static inline void exit_shm(struct task_struct *task) } #endif -#endif /* __KERNEL__ */ - #endif /* _LINUX_SHM_H_ */ diff --git a/include/linux/signal.h b/include/linux/signal.h index 26b424adc842..e19a011b43b7 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -1,11 +1,8 @@ #ifndef _LINUX_SIGNAL_H #define _LINUX_SIGNAL_H -#include -#include - -#ifdef __KERNEL__ #include +#include struct task_struct; @@ -388,6 +385,4 @@ int unhandled_signal(struct task_struct *tsk, int sig); void signals_init(void); -#endif /* __KERNEL__ */ - #endif /* _LINUX_SIGNAL_H */ diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index 247399b2979a..eadbe227c256 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -4,51 +4,11 @@ * Copyright (C) 2007 Davide Libenzi * */ - #ifndef _LINUX_SIGNALFD_H #define _LINUX_SIGNALFD_H -#include -/* For O_CLOEXEC and O_NONBLOCK */ -#include - -/* Flags for signalfd4. */ -#define SFD_CLOEXEC O_CLOEXEC -#define SFD_NONBLOCK O_NONBLOCK - -struct signalfd_siginfo { - __u32 ssi_signo; - __s32 ssi_errno; - __s32 ssi_code; - __u32 ssi_pid; - __u32 ssi_uid; - __s32 ssi_fd; - __u32 ssi_tid; - __u32 ssi_band; - __u32 ssi_overrun; - __u32 ssi_trapno; - __s32 ssi_status; - __s32 ssi_int; - __u64 ssi_ptr; - __u64 ssi_utime; - __u64 ssi_stime; - __u64 ssi_addr; - __u16 ssi_addr_lsb; +#include - /* - * Pad strcture to 128 bytes. Remember to update the - * pad size when you add new members. We use a fixed - * size structure to avoid compatibility problems with - * future versions, and we leave extra space for additional - * members. We use fixed size members because this strcture - * comes out of a read(2) and we really don't want to have - * a compat on read(2). - */ - __u8 __pad[46]; -}; - - -#ifdef __KERNEL__ #ifdef CONFIG_SIGNALFD @@ -71,6 +31,4 @@ static inline void signalfd_cleanup(struct sighand_struct *sighand) { } #endif /* CONFIG_SIGNALFD */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_SIGNALFD_H */ diff --git a/include/linux/snmp.h b/include/linux/snmp.h deleted file mode 100644 index fdfba235f9f1..000000000000 --- a/include/linux/snmp.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Definitions for MIBs - * - * Author: Hideaki YOSHIFUJI - */ - -#ifndef _LINUX_SNMP_H -#define _LINUX_SNMP_H - -/* ipstats mib definitions */ -/* - * RFC 1213: MIB-II - * RFC 2011 (updates 1213): SNMPv2-MIB-IP - * RFC 2863: Interfaces Group MIB - * RFC 2465: IPv6 MIB: General Group - * draft-ietf-ipv6-rfc2011-update-10.txt: MIB for IP: IP Statistics Tables - */ -enum -{ - IPSTATS_MIB_NUM = 0, -/* frequently written fields in fast path, kept in same cache line */ - IPSTATS_MIB_INPKTS, /* InReceives */ - IPSTATS_MIB_INOCTETS, /* InOctets */ - IPSTATS_MIB_INDELIVERS, /* InDelivers */ - IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */ - IPSTATS_MIB_OUTPKTS, /* OutRequests */ - IPSTATS_MIB_OUTOCTETS, /* OutOctets */ -/* other fields */ - IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */ - IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */ - IPSTATS_MIB_INNOROUTES, /* InNoRoutes */ - IPSTATS_MIB_INADDRERRORS, /* InAddrErrors */ - IPSTATS_MIB_INUNKNOWNPROTOS, /* InUnknownProtos */ - IPSTATS_MIB_INTRUNCATEDPKTS, /* InTruncatedPkts */ - IPSTATS_MIB_INDISCARDS, /* InDiscards */ - IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */ - IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */ - IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */ - IPSTATS_MIB_REASMREQDS, /* ReasmReqds */ - IPSTATS_MIB_REASMOKS, /* ReasmOKs */ - IPSTATS_MIB_REASMFAILS, /* ReasmFails */ - IPSTATS_MIB_FRAGOKS, /* FragOKs */ - IPSTATS_MIB_FRAGFAILS, /* FragFails */ - IPSTATS_MIB_FRAGCREATES, /* FragCreates */ - IPSTATS_MIB_INMCASTPKTS, /* InMcastPkts */ - IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */ - IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */ - IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */ - IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */ - IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */ - IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ - IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ - __IPSTATS_MIB_MAX -}; - -/* icmp mib definitions */ -/* - * RFC 1213: MIB-II ICMP Group - * RFC 2011 (updates 1213): SNMPv2 MIB for IP: ICMP group - */ -enum -{ - ICMP_MIB_NUM = 0, - ICMP_MIB_INMSGS, /* InMsgs */ - ICMP_MIB_INERRORS, /* InErrors */ - ICMP_MIB_INDESTUNREACHS, /* InDestUnreachs */ - ICMP_MIB_INTIMEEXCDS, /* InTimeExcds */ - ICMP_MIB_INPARMPROBS, /* InParmProbs */ - ICMP_MIB_INSRCQUENCHS, /* InSrcQuenchs */ - ICMP_MIB_INREDIRECTS, /* InRedirects */ - ICMP_MIB_INECHOS, /* InEchos */ - ICMP_MIB_INECHOREPS, /* InEchoReps */ - ICMP_MIB_INTIMESTAMPS, /* InTimestamps */ - ICMP_MIB_INTIMESTAMPREPS, /* InTimestampReps */ - ICMP_MIB_INADDRMASKS, /* InAddrMasks */ - ICMP_MIB_INADDRMASKREPS, /* InAddrMaskReps */ - ICMP_MIB_OUTMSGS, /* OutMsgs */ - ICMP_MIB_OUTERRORS, /* OutErrors */ - ICMP_MIB_OUTDESTUNREACHS, /* OutDestUnreachs */ - ICMP_MIB_OUTTIMEEXCDS, /* OutTimeExcds */ - ICMP_MIB_OUTPARMPROBS, /* OutParmProbs */ - ICMP_MIB_OUTSRCQUENCHS, /* OutSrcQuenchs */ - ICMP_MIB_OUTREDIRECTS, /* OutRedirects */ - ICMP_MIB_OUTECHOS, /* OutEchos */ - ICMP_MIB_OUTECHOREPS, /* OutEchoReps */ - ICMP_MIB_OUTTIMESTAMPS, /* OutTimestamps */ - ICMP_MIB_OUTTIMESTAMPREPS, /* OutTimestampReps */ - ICMP_MIB_OUTADDRMASKS, /* OutAddrMasks */ - ICMP_MIB_OUTADDRMASKREPS, /* OutAddrMaskReps */ - __ICMP_MIB_MAX -}; - -#define __ICMPMSG_MIB_MAX 512 /* Out+In for all 8-bit ICMP types */ - -/* icmp6 mib definitions */ -/* - * RFC 2466: ICMPv6-MIB - */ -enum -{ - ICMP6_MIB_NUM = 0, - ICMP6_MIB_INMSGS, /* InMsgs */ - ICMP6_MIB_INERRORS, /* InErrors */ - ICMP6_MIB_OUTMSGS, /* OutMsgs */ - ICMP6_MIB_OUTERRORS, /* OutErrors */ - __ICMP6_MIB_MAX -}; - -#define __ICMP6MSG_MIB_MAX 512 /* Out+In for all 8-bit ICMPv6 types */ - -/* tcp mib definitions */ -/* - * RFC 1213: MIB-II TCP group - * RFC 2012 (updates 1213): SNMPv2-MIB-TCP - */ -enum -{ - TCP_MIB_NUM = 0, - TCP_MIB_RTOALGORITHM, /* RtoAlgorithm */ - TCP_MIB_RTOMIN, /* RtoMin */ - TCP_MIB_RTOMAX, /* RtoMax */ - TCP_MIB_MAXCONN, /* MaxConn */ - TCP_MIB_ACTIVEOPENS, /* ActiveOpens */ - TCP_MIB_PASSIVEOPENS, /* PassiveOpens */ - TCP_MIB_ATTEMPTFAILS, /* AttemptFails */ - TCP_MIB_ESTABRESETS, /* EstabResets */ - TCP_MIB_CURRESTAB, /* CurrEstab */ - TCP_MIB_INSEGS, /* InSegs */ - TCP_MIB_OUTSEGS, /* OutSegs */ - TCP_MIB_RETRANSSEGS, /* RetransSegs */ - TCP_MIB_INERRS, /* InErrs */ - TCP_MIB_OUTRSTS, /* OutRsts */ - __TCP_MIB_MAX -}; - -/* udp mib definitions */ -/* - * RFC 1213: MIB-II UDP group - * RFC 2013 (updates 1213): SNMPv2-MIB-UDP - */ -enum -{ - UDP_MIB_NUM = 0, - UDP_MIB_INDATAGRAMS, /* InDatagrams */ - UDP_MIB_NOPORTS, /* NoPorts */ - UDP_MIB_INERRORS, /* InErrors */ - UDP_MIB_OUTDATAGRAMS, /* OutDatagrams */ - UDP_MIB_RCVBUFERRORS, /* RcvbufErrors */ - UDP_MIB_SNDBUFERRORS, /* SndbufErrors */ - __UDP_MIB_MAX -}; - -/* linux mib definitions */ -enum -{ - LINUX_MIB_NUM = 0, - LINUX_MIB_SYNCOOKIESSENT, /* SyncookiesSent */ - LINUX_MIB_SYNCOOKIESRECV, /* SyncookiesRecv */ - LINUX_MIB_SYNCOOKIESFAILED, /* SyncookiesFailed */ - LINUX_MIB_EMBRYONICRSTS, /* EmbryonicRsts */ - LINUX_MIB_PRUNECALLED, /* PruneCalled */ - LINUX_MIB_RCVPRUNED, /* RcvPruned */ - LINUX_MIB_OFOPRUNED, /* OfoPruned */ - LINUX_MIB_OUTOFWINDOWICMPS, /* OutOfWindowIcmps */ - LINUX_MIB_LOCKDROPPEDICMPS, /* LockDroppedIcmps */ - LINUX_MIB_ARPFILTER, /* ArpFilter */ - LINUX_MIB_TIMEWAITED, /* TimeWaited */ - LINUX_MIB_TIMEWAITRECYCLED, /* TimeWaitRecycled */ - LINUX_MIB_TIMEWAITKILLED, /* TimeWaitKilled */ - LINUX_MIB_PAWSPASSIVEREJECTED, /* PAWSPassiveRejected */ - LINUX_MIB_PAWSACTIVEREJECTED, /* PAWSActiveRejected */ - LINUX_MIB_PAWSESTABREJECTED, /* PAWSEstabRejected */ - LINUX_MIB_DELAYEDACKS, /* DelayedACKs */ - LINUX_MIB_DELAYEDACKLOCKED, /* DelayedACKLocked */ - LINUX_MIB_DELAYEDACKLOST, /* DelayedACKLost */ - LINUX_MIB_LISTENOVERFLOWS, /* ListenOverflows */ - LINUX_MIB_LISTENDROPS, /* ListenDrops */ - LINUX_MIB_TCPPREQUEUED, /* TCPPrequeued */ - LINUX_MIB_TCPDIRECTCOPYFROMBACKLOG, /* TCPDirectCopyFromBacklog */ - LINUX_MIB_TCPDIRECTCOPYFROMPREQUEUE, /* TCPDirectCopyFromPrequeue */ - LINUX_MIB_TCPPREQUEUEDROPPED, /* TCPPrequeueDropped */ - LINUX_MIB_TCPHPHITS, /* TCPHPHits */ - LINUX_MIB_TCPHPHITSTOUSER, /* TCPHPHitsToUser */ - LINUX_MIB_TCPPUREACKS, /* TCPPureAcks */ - LINUX_MIB_TCPHPACKS, /* TCPHPAcks */ - LINUX_MIB_TCPRENORECOVERY, /* TCPRenoRecovery */ - LINUX_MIB_TCPSACKRECOVERY, /* TCPSackRecovery */ - LINUX_MIB_TCPSACKRENEGING, /* TCPSACKReneging */ - LINUX_MIB_TCPFACKREORDER, /* TCPFACKReorder */ - LINUX_MIB_TCPSACKREORDER, /* TCPSACKReorder */ - LINUX_MIB_TCPRENOREORDER, /* TCPRenoReorder */ - LINUX_MIB_TCPTSREORDER, /* TCPTSReorder */ - LINUX_MIB_TCPFULLUNDO, /* TCPFullUndo */ - LINUX_MIB_TCPPARTIALUNDO, /* TCPPartialUndo */ - LINUX_MIB_TCPDSACKUNDO, /* TCPDSACKUndo */ - LINUX_MIB_TCPLOSSUNDO, /* TCPLossUndo */ - LINUX_MIB_TCPLOSTRETRANSMIT, /* TCPLostRetransmit */ - LINUX_MIB_TCPRENOFAILURES, /* TCPRenoFailures */ - LINUX_MIB_TCPSACKFAILURES, /* TCPSackFailures */ - LINUX_MIB_TCPLOSSFAILURES, /* TCPLossFailures */ - LINUX_MIB_TCPFASTRETRANS, /* TCPFastRetrans */ - LINUX_MIB_TCPFORWARDRETRANS, /* TCPForwardRetrans */ - LINUX_MIB_TCPSLOWSTARTRETRANS, /* TCPSlowStartRetrans */ - LINUX_MIB_TCPTIMEOUTS, /* TCPTimeouts */ - LINUX_MIB_TCPRENORECOVERYFAIL, /* TCPRenoRecoveryFail */ - LINUX_MIB_TCPSACKRECOVERYFAIL, /* TCPSackRecoveryFail */ - LINUX_MIB_TCPSCHEDULERFAILED, /* TCPSchedulerFailed */ - LINUX_MIB_TCPRCVCOLLAPSED, /* TCPRcvCollapsed */ - LINUX_MIB_TCPDSACKOLDSENT, /* TCPDSACKOldSent */ - LINUX_MIB_TCPDSACKOFOSENT, /* TCPDSACKOfoSent */ - LINUX_MIB_TCPDSACKRECV, /* TCPDSACKRecv */ - LINUX_MIB_TCPDSACKOFORECV, /* TCPDSACKOfoRecv */ - LINUX_MIB_TCPABORTONDATA, /* TCPAbortOnData */ - LINUX_MIB_TCPABORTONCLOSE, /* TCPAbortOnClose */ - LINUX_MIB_TCPABORTONMEMORY, /* TCPAbortOnMemory */ - LINUX_MIB_TCPABORTONTIMEOUT, /* TCPAbortOnTimeout */ - LINUX_MIB_TCPABORTONLINGER, /* TCPAbortOnLinger */ - LINUX_MIB_TCPABORTFAILED, /* TCPAbortFailed */ - LINUX_MIB_TCPMEMORYPRESSURES, /* TCPMemoryPressures */ - LINUX_MIB_TCPSACKDISCARD, /* TCPSACKDiscard */ - LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */ - LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */ - LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ - LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ - LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ - LINUX_MIB_SACKSHIFTED, - LINUX_MIB_SACKMERGED, - LINUX_MIB_SACKSHIFTFALLBACK, - LINUX_MIB_TCPBACKLOGDROP, - LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */ - LINUX_MIB_TCPDEFERACCEPTDROP, - LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */ - LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */ - LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ - LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ - LINUX_MIB_TCPRETRANSFAIL, /* TCPRetransFail */ - LINUX_MIB_TCPRCVCOALESCE, /* TCPRcvCoalesce */ - LINUX_MIB_TCPOFOQUEUE, /* TCPOFOQueue */ - LINUX_MIB_TCPOFODROP, /* TCPOFODrop */ - LINUX_MIB_TCPOFOMERGE, /* TCPOFOMerge */ - LINUX_MIB_TCPCHALLENGEACK, /* TCPChallengeACK */ - LINUX_MIB_TCPSYNCHALLENGE, /* TCPSYNChallenge */ - LINUX_MIB_TCPFASTOPENACTIVE, /* TCPFastOpenActive */ - LINUX_MIB_TCPFASTOPENPASSIVE, /* TCPFastOpenPassive*/ - LINUX_MIB_TCPFASTOPENPASSIVEFAIL, /* TCPFastOpenPassiveFail */ - LINUX_MIB_TCPFASTOPENLISTENOVERFLOW, /* TCPFastOpenListenOverflow */ - LINUX_MIB_TCPFASTOPENCOOKIEREQD, /* TCPFastOpenCookieReqd */ - __LINUX_MIB_MAX -}; - -/* linux Xfrm mib definitions */ -enum -{ - LINUX_MIB_XFRMNUM = 0, - LINUX_MIB_XFRMINERROR, /* XfrmInError */ - LINUX_MIB_XFRMINBUFFERERROR, /* XfrmInBufferError */ - LINUX_MIB_XFRMINHDRERROR, /* XfrmInHdrError */ - LINUX_MIB_XFRMINNOSTATES, /* XfrmInNoStates */ - LINUX_MIB_XFRMINSTATEPROTOERROR, /* XfrmInStateProtoError */ - LINUX_MIB_XFRMINSTATEMODEERROR, /* XfrmInStateModeError */ - LINUX_MIB_XFRMINSTATESEQERROR, /* XfrmInStateSeqError */ - LINUX_MIB_XFRMINSTATEEXPIRED, /* XfrmInStateExpired */ - LINUX_MIB_XFRMINSTATEMISMATCH, /* XfrmInStateMismatch */ - LINUX_MIB_XFRMINSTATEINVALID, /* XfrmInStateInvalid */ - LINUX_MIB_XFRMINTMPLMISMATCH, /* XfrmInTmplMismatch */ - LINUX_MIB_XFRMINNOPOLS, /* XfrmInNoPols */ - LINUX_MIB_XFRMINPOLBLOCK, /* XfrmInPolBlock */ - LINUX_MIB_XFRMINPOLERROR, /* XfrmInPolError */ - LINUX_MIB_XFRMOUTERROR, /* XfrmOutError */ - LINUX_MIB_XFRMOUTBUNDLEGENERROR, /* XfrmOutBundleGenError */ - LINUX_MIB_XFRMOUTBUNDLECHECKERROR, /* XfrmOutBundleCheckError */ - LINUX_MIB_XFRMOUTNOSTATES, /* XfrmOutNoStates */ - LINUX_MIB_XFRMOUTSTATEPROTOERROR, /* XfrmOutStateProtoError */ - LINUX_MIB_XFRMOUTSTATEMODEERROR, /* XfrmOutStateModeError */ - LINUX_MIB_XFRMOUTSTATESEQERROR, /* XfrmOutStateSeqError */ - LINUX_MIB_XFRMOUTSTATEEXPIRED, /* XfrmOutStateExpired */ - LINUX_MIB_XFRMOUTPOLBLOCK, /* XfrmOutPolBlock */ - LINUX_MIB_XFRMOUTPOLDEAD, /* XfrmOutPolDead */ - LINUX_MIB_XFRMOUTPOLERROR, /* XfrmOutPolError */ - LINUX_MIB_XFRMFWDHDRERROR, /* XfrmFwdHdrError*/ - __LINUX_MIB_XFRMMAX -}; - -#endif /* _LINUX_SNMP_H */ diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h index e3e395acc2fd..e8d702e0fd89 100644 --- a/include/linux/sock_diag.h +++ b/include/linux/sock_diag.h @@ -1,29 +1,8 @@ #ifndef __SOCK_DIAG_H__ #define __SOCK_DIAG_H__ -#include +#include -#define SOCK_DIAG_BY_FAMILY 20 - -struct sock_diag_req { - __u8 sdiag_family; - __u8 sdiag_protocol; -}; - -enum { - SK_MEMINFO_RMEM_ALLOC, - SK_MEMINFO_RCVBUF, - SK_MEMINFO_WMEM_ALLOC, - SK_MEMINFO_SNDBUF, - SK_MEMINFO_FWD_ALLOC, - SK_MEMINFO_WMEM_QUEUED, - SK_MEMINFO_OPTMEM, - SK_MEMINFO_BACKLOG, - - SK_MEMINFO_VARS, -}; - -#ifdef __KERNEL__ struct sk_buff; struct nlmsghdr; struct sock; @@ -44,5 +23,4 @@ void sock_diag_save_cookie(void *sk, __u32 *cookie); int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr); -#endif /* KERNEL */ #endif diff --git a/include/linux/socket.h b/include/linux/socket.h index ba7b2e817cfa..9a546ff853dc 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -1,30 +1,13 @@ #ifndef _LINUX_SOCKET_H #define _LINUX_SOCKET_H -/* - * Desired design of maximum size and alignment (see RFC2553) - */ -#define _K_SS_MAXSIZE 128 /* Implementation specific max size */ -#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *)) - /* Implementation specific desired alignment */ - -typedef unsigned short __kernel_sa_family_t; - -struct __kernel_sockaddr_storage { - __kernel_sa_family_t ss_family; /* address family */ - /* Following field(s) are implementation specific */ - char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; - /* space to achieve desired size, */ - /* _SS_MAXSIZE value minus size of ss_family */ -} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */ - -#ifdef __KERNEL__ #include /* arch-dependent defines */ #include /* the SIOCxxx I/O controls */ #include /* iovec support */ #include /* pid_t */ #include /* __user */ +#include struct pid; struct cred; @@ -340,5 +323,4 @@ extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags); -#endif /* not kernel and not glibc */ #endif /* _LINUX_SOCKET_H */ diff --git a/include/linux/sockios.h b/include/linux/sockios.h deleted file mode 100644 index 7997a506ad41..000000000000 --- a/include/linux/sockios.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * Definitions of the socket-level I/O control calls. - * - * Version: @(#)sockios.h 1.0.2 03/09/93 - * - * Authors: Ross Biro - * Fred N. van Kempen, - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _LINUX_SOCKIOS_H -#define _LINUX_SOCKIOS_H - -#include - -/* Linux-specific socket ioctls */ -#define SIOCINQ FIONREAD -#define SIOCOUTQ TIOCOUTQ /* output queue size (not sent + not acked) */ - -/* Routing table calls. */ -#define SIOCADDRT 0x890B /* add routing table entry */ -#define SIOCDELRT 0x890C /* delete routing table entry */ -#define SIOCRTMSG 0x890D /* call to routing system */ - -/* Socket configuration controls. */ -#define SIOCGIFNAME 0x8910 /* get iface name */ -#define SIOCSIFLINK 0x8911 /* set iface channel */ -#define SIOCGIFCONF 0x8912 /* get iface list */ -#define SIOCGIFFLAGS 0x8913 /* get flags */ -#define SIOCSIFFLAGS 0x8914 /* set flags */ -#define SIOCGIFADDR 0x8915 /* get PA address */ -#define SIOCSIFADDR 0x8916 /* set PA address */ -#define SIOCGIFDSTADDR 0x8917 /* get remote PA address */ -#define SIOCSIFDSTADDR 0x8918 /* set remote PA address */ -#define SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ -#define SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ -#define SIOCGIFNETMASK 0x891b /* get network PA mask */ -#define SIOCSIFNETMASK 0x891c /* set network PA mask */ -#define SIOCGIFMETRIC 0x891d /* get metric */ -#define SIOCSIFMETRIC 0x891e /* set metric */ -#define SIOCGIFMEM 0x891f /* get memory address (BSD) */ -#define SIOCSIFMEM 0x8920 /* set memory address (BSD) */ -#define SIOCGIFMTU 0x8921 /* get MTU size */ -#define SIOCSIFMTU 0x8922 /* set MTU size */ -#define SIOCSIFNAME 0x8923 /* set interface name */ -#define SIOCSIFHWADDR 0x8924 /* set hardware address */ -#define SIOCGIFENCAP 0x8925 /* get/set encapsulations */ -#define SIOCSIFENCAP 0x8926 -#define SIOCGIFHWADDR 0x8927 /* Get hardware address */ -#define SIOCGIFSLAVE 0x8929 /* Driver slaving support */ -#define SIOCSIFSLAVE 0x8930 -#define SIOCADDMULTI 0x8931 /* Multicast address lists */ -#define SIOCDELMULTI 0x8932 -#define SIOCGIFINDEX 0x8933 /* name -> if_index mapping */ -#define SIOGIFINDEX SIOCGIFINDEX /* misprint compatibility :-) */ -#define SIOCSIFPFLAGS 0x8934 /* set/get extended flags set */ -#define SIOCGIFPFLAGS 0x8935 -#define SIOCDIFADDR 0x8936 /* delete PA address */ -#define SIOCSIFHWBROADCAST 0x8937 /* set hardware broadcast addr */ -#define SIOCGIFCOUNT 0x8938 /* get number of devices */ - -#define SIOCGIFBR 0x8940 /* Bridging support */ -#define SIOCSIFBR 0x8941 /* Set bridging options */ - -#define SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ -#define SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ - -/* SIOCGIFDIVERT was: 0x8944 Frame diversion support */ -/* SIOCSIFDIVERT was: 0x8945 Set frame diversion options */ - -#define SIOCETHTOOL 0x8946 /* Ethtool interface */ - -#define SIOCGMIIPHY 0x8947 /* Get address of MII PHY in use. */ -#define SIOCGMIIREG 0x8948 /* Read MII PHY register. */ -#define SIOCSMIIREG 0x8949 /* Write MII PHY register. */ - -#define SIOCWANDEV 0x894A /* get/set netdev parameters */ - -#define SIOCOUTQNSD 0x894B /* output queue size (not sent only) */ - -/* ARP cache control calls. */ - /* 0x8950 - 0x8952 * obsolete calls, don't re-use */ -#define SIOCDARP 0x8953 /* delete ARP table entry */ -#define SIOCGARP 0x8954 /* get ARP table entry */ -#define SIOCSARP 0x8955 /* set ARP table entry */ - -/* RARP cache control calls. */ -#define SIOCDRARP 0x8960 /* delete RARP table entry */ -#define SIOCGRARP 0x8961 /* get RARP table entry */ -#define SIOCSRARP 0x8962 /* set RARP table entry */ - -/* Driver configuration calls */ - -#define SIOCGIFMAP 0x8970 /* Get device parameters */ -#define SIOCSIFMAP 0x8971 /* Set device parameters */ - -/* DLCI configuration calls */ - -#define SIOCADDDLCI 0x8980 /* Create new DLCI device */ -#define SIOCDELDLCI 0x8981 /* Delete DLCI device */ - -#define SIOCGIFVLAN 0x8982 /* 802.1Q VLAN support */ -#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ - -/* bonding calls */ - -#define SIOCBONDENSLAVE 0x8990 /* enslave a device to the bond */ -#define SIOCBONDRELEASE 0x8991 /* release a slave from the bond*/ -#define SIOCBONDSETHWADDR 0x8992 /* set the hw addr of the bond */ -#define SIOCBONDSLAVEINFOQUERY 0x8993 /* rtn info about slave state */ -#define SIOCBONDINFOQUERY 0x8994 /* rtn info about bond state */ -#define SIOCBONDCHANGEACTIVE 0x8995 /* update to a new active slave */ - -/* bridge calls */ -#define SIOCBRADDBR 0x89a0 /* create new bridge device */ -#define SIOCBRDELBR 0x89a1 /* remove bridge device */ -#define SIOCBRADDIF 0x89a2 /* add interface to bridge */ -#define SIOCBRDELIF 0x89a3 /* remove interface from bridge */ - -/* hardware time stamping: parameters in linux/net_tstamp.h */ -#define SIOCSHWTSTAMP 0x89b0 - -/* Device private ioctl calls */ - -/* - * These 16 ioctls are available to devices via the do_ioctl() device - * vector. Each device should include this file and redefine these names - * as their own. Because these are device dependent it is a good idea - * _NOT_ to issue them to random objects and hope. - * - * THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM - */ - -#define SIOCDEVPRIVATE 0x89F0 /* to 89FF */ - -/* - * These 16 ioctl calls are protocol private - */ - -#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */ -#endif /* _LINUX_SOCKIOS_H */ diff --git a/include/linux/som.h b/include/linux/som.h deleted file mode 100644 index 166594e4e7be..000000000000 --- a/include/linux/som.h +++ /dev/null @@ -1,154 +0,0 @@ -#ifndef _LINUX_SOM_H -#define _LINUX_SOM_H - -/* File format definition for SOM executables / shared libraries */ - -/* we need struct timespec */ -#include - -#define SOM_PAGESIZE 4096 - -/* this is the SOM header */ -struct som_hdr { - short system_id; /* magic number - system */ - short a_magic; /* magic number - file type */ - unsigned int version_id; /* versiod ID: YYMMDDHH */ - struct timespec file_time; /* system clock */ - unsigned int entry_space; /* space for entry point */ - unsigned int entry_subspace; /* subspace for entry point */ - unsigned int entry_offset; /* offset of entry point */ - unsigned int aux_header_location; /* auxiliary header location */ - unsigned int aux_header_size; /* auxiliary header size */ - unsigned int som_length; /* length of entire SOM */ - unsigned int presumed_dp; /* compiler's DP value */ - unsigned int space_location; /* space dictionary location */ - unsigned int space_total; /* number of space entries */ - unsigned int subspace_location; /* subspace entries location */ - unsigned int subspace_total; /* number of subspace entries */ - unsigned int loader_fixup_location; /* MPE/iX loader fixup */ - unsigned int loader_fixup_total; /* number of fixup records */ - unsigned int space_strings_location; /* (sub)space names */ - unsigned int space_strings_size; /* size of strings area */ - unsigned int init_array_location; /* reserved */ - unsigned int init_array_total; /* reserved */ - unsigned int compiler_location; /* module dictionary */ - unsigned int compiler_total; /* number of modules */ - unsigned int symbol_location; /* symbol dictionary */ - unsigned int symbol_total; /* number of symbols */ - unsigned int fixup_request_location; /* fixup requests */ - unsigned int fixup_request_total; /* number of fixup requests */ - unsigned int symbol_strings_location;/* module & symbol names area */ - unsigned int symbol_strings_size; /* size of strings area */ - unsigned int unloadable_sp_location; /* unloadable spaces location */ - unsigned int unloadable_sp_size; /* size of data */ - unsigned int checksum; -}; - -/* values for system_id */ - -#define SOM_SID_PARISC_1_0 0x020b -#define SOM_SID_PARISC_1_1 0x0210 -#define SOM_SID_PARISC_2_0 0x0214 - -/* values for a_magic */ - -#define SOM_LIB_EXEC 0x0104 -#define SOM_RELOCATABLE 0x0106 -#define SOM_EXEC_NONSHARE 0x0107 -#define SOM_EXEC_SHARE 0x0108 -#define SOM_EXEC_DEMAND 0x010B -#define SOM_LIB_DYN 0x010D -#define SOM_LIB_SHARE 0x010E -#define SOM_LIB_RELOC 0x0619 - -/* values for version_id. Decimal not hex, yes. Grr. */ - -#define SOM_ID_OLD 85082112 -#define SOM_ID_NEW 87102412 - -struct aux_id { - unsigned int mandatory :1; /* the linker must understand this */ - unsigned int copy :1; /* Must be copied by the linker */ - unsigned int append :1; /* Must be merged by the linker */ - unsigned int ignore :1; /* Discard section if unknown */ - unsigned int reserved :12; - unsigned int type :16; /* Header type */ - unsigned int length; /* length of _following_ data */ -}; - -/* The Exec Auxiliary Header. Called The HP-UX Header within HP apparently. */ -struct som_exec_auxhdr { - struct aux_id som_auxhdr; - int exec_tsize; /* Text size in bytes */ - int exec_tmem; /* Address to load text at */ - int exec_tfile; /* Location of text in file */ - int exec_dsize; /* Data size in bytes */ - int exec_dmem; /* Address to load data at */ - int exec_dfile; /* Location of data in file */ - int exec_bsize; /* Uninitialised data (bss) */ - int exec_entry; /* Address to start executing */ - int exec_flags; /* loader flags */ - int exec_bfill; /* initialisation value for bss */ -}; - -/* Oh, the things people do to avoid casts. Shame it'll break with gcc's - * new aliasing rules really. - */ -union name_pt { - char * n_name; - unsigned int n_strx; -}; - -/* The Space Dictionary */ -struct space_dictionary_record { - union name_pt name; /* index to subspace name */ - unsigned int is_loadable :1; /* loadable */ - unsigned int is_defined :1; /* defined within file */ - unsigned int is_private :1; /* not sharable */ - unsigned int has_intermediate_code :1; /* contains intermediate code */ - unsigned int is_tspecific :1; /* thread specific */ - unsigned int reserved :11; /* for future expansion */ - unsigned int sort_key :8; /* for linker */ - unsigned int reserved2 :8; /* for future expansion */ - - int space_number; /* index */ - int subspace_index; /* index into subspace dict */ - unsigned int subspace_quantity; /* number of subspaces */ - int loader_fix_index; /* for loader */ - unsigned int loader_fix_quantity; /* for loader */ - int init_pointer_index; /* data pointer array index */ - unsigned int init_pointer_quantity; /* number of data pointers */ -}; - -/* The Subspace Dictionary */ -struct subspace_dictionary_record { - int space_index; - unsigned int access_control_bits :7; - unsigned int memory_resident :1; - unsigned int dup_common :1; - unsigned int is_common :1; - unsigned int quadrant :2; - unsigned int initially_frozen :1; - unsigned int is_first :1; - unsigned int code_only :1; - unsigned int sort_key :8; - unsigned int replicate_init :1; - unsigned int continuation :1; - unsigned int is_tspecific :1; - unsigned int is_comdat :1; - unsigned int reserved :4; - - int file_loc_init_value; - unsigned int initialization_length; - unsigned int subspace_start; - unsigned int subspace_length; - - unsigned int reserved2 :5; - unsigned int alignment :27; - - union name_pt name; - int fixup_request_index; - unsigned int fixup_request_quantity; -}; - -#endif /* _LINUX_SOM_H */ diff --git a/include/linux/sonet.h b/include/linux/sonet.h index de8832dd272b..680f9a31df25 100644 --- a/include/linux/sonet.h +++ b/include/linux/sonet.h @@ -1,64 +1,10 @@ /* sonet.h - SONET/SHD physical layer control */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - #ifndef LINUX_SONET_H #define LINUX_SONET_H -#define __SONET_ITEMS \ - __HANDLE_ITEM(section_bip); /* section parity errors (B1) */ \ - __HANDLE_ITEM(line_bip); /* line parity errors (B2) */ \ - __HANDLE_ITEM(path_bip); /* path parity errors (B3) */ \ - __HANDLE_ITEM(line_febe); /* line parity errors at remote */ \ - __HANDLE_ITEM(path_febe); /* path parity errors at remote */ \ - __HANDLE_ITEM(corr_hcs); /* correctable header errors */ \ - __HANDLE_ITEM(uncorr_hcs); /* uncorrectable header errors */ \ - __HANDLE_ITEM(tx_cells); /* cells sent */ \ - __HANDLE_ITEM(rx_cells); /* cells received */ - -struct sonet_stats { -#define __HANDLE_ITEM(i) int i - __SONET_ITEMS -#undef __HANDLE_ITEM -} __attribute__ ((packed)); - - -#define SONET_GETSTAT _IOR('a',ATMIOC_PHYTYP,struct sonet_stats) - /* get statistics */ -#define SONET_GETSTATZ _IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats) - /* ... and zero counters */ -#define SONET_SETDIAG _IOWR('a',ATMIOC_PHYTYP+2,int) - /* set error insertion */ -#define SONET_CLRDIAG _IOWR('a',ATMIOC_PHYTYP+3,int) - /* clear error insertion */ -#define SONET_GETDIAG _IOR('a',ATMIOC_PHYTYP+4,int) - /* query error insertion */ -#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int) - /* set framing mode (SONET/SDH) */ -#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int) - /* get framing mode */ -#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \ - unsigned char[SONET_FRSENSE_SIZE]) /* get framing sense information */ - -#define SONET_INS_SBIP 1 /* section BIP */ -#define SONET_INS_LBIP 2 /* line BIP */ -#define SONET_INS_PBIP 4 /* path BIP */ -#define SONET_INS_FRAME 8 /* out of frame */ -#define SONET_INS_LOS 16 /* set line to zero */ -#define SONET_INS_LAIS 32 /* line alarm indication signal */ -#define SONET_INS_PAIS 64 /* path alarm indication signal */ -#define SONET_INS_HCS 128 /* insert HCS error */ - -#define SONET_FRAME_SONET 0 /* SONET STS-3 framing */ -#define SONET_FRAME_SDH 1 /* SDH STM-1 framing */ - -#define SONET_FRSENSE_SIZE 6 /* C1[3],H1[3] (0xff for unknown) */ - - -#ifdef __KERNEL__ #include +#include struct k_sonet_stats { #define __HANDLE_ITEM(i) atomic_t i @@ -71,5 +17,3 @@ extern void sonet_subtract_stats(struct k_sonet_stats *from, struct sonet_stats *to); #endif - -#endif diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h index c0f87da78f8a..0b7cc265cc0b 100644 --- a/include/linux/sonypi.h +++ b/include/linux/sonypi.h @@ -32,117 +32,11 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ - #ifndef _SONYPI_H_ #define _SONYPI_H_ -#include - -/* events the user application reading /dev/sonypi can use */ - -#define SONYPI_EVENT_IGNORE 0 -#define SONYPI_EVENT_JOGDIAL_DOWN 1 -#define SONYPI_EVENT_JOGDIAL_UP 2 -#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED 3 -#define SONYPI_EVENT_JOGDIAL_UP_PRESSED 4 -#define SONYPI_EVENT_JOGDIAL_PRESSED 5 -#define SONYPI_EVENT_JOGDIAL_RELEASED 6 /* obsolete */ -#define SONYPI_EVENT_CAPTURE_PRESSED 7 -#define SONYPI_EVENT_CAPTURE_RELEASED 8 /* obsolete */ -#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED 9 -#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED 10 -#define SONYPI_EVENT_FNKEY_ESC 11 -#define SONYPI_EVENT_FNKEY_F1 12 -#define SONYPI_EVENT_FNKEY_F2 13 -#define SONYPI_EVENT_FNKEY_F3 14 -#define SONYPI_EVENT_FNKEY_F4 15 -#define SONYPI_EVENT_FNKEY_F5 16 -#define SONYPI_EVENT_FNKEY_F6 17 -#define SONYPI_EVENT_FNKEY_F7 18 -#define SONYPI_EVENT_FNKEY_F8 19 -#define SONYPI_EVENT_FNKEY_F9 20 -#define SONYPI_EVENT_FNKEY_F10 21 -#define SONYPI_EVENT_FNKEY_F11 22 -#define SONYPI_EVENT_FNKEY_F12 23 -#define SONYPI_EVENT_FNKEY_1 24 -#define SONYPI_EVENT_FNKEY_2 25 -#define SONYPI_EVENT_FNKEY_D 26 -#define SONYPI_EVENT_FNKEY_E 27 -#define SONYPI_EVENT_FNKEY_F 28 -#define SONYPI_EVENT_FNKEY_S 29 -#define SONYPI_EVENT_FNKEY_B 30 -#define SONYPI_EVENT_BLUETOOTH_PRESSED 31 -#define SONYPI_EVENT_PKEY_P1 32 -#define SONYPI_EVENT_PKEY_P2 33 -#define SONYPI_EVENT_PKEY_P3 34 -#define SONYPI_EVENT_BACK_PRESSED 35 -#define SONYPI_EVENT_LID_CLOSED 36 -#define SONYPI_EVENT_LID_OPENED 37 -#define SONYPI_EVENT_BLUETOOTH_ON 38 -#define SONYPI_EVENT_BLUETOOTH_OFF 39 -#define SONYPI_EVENT_HELP_PRESSED 40 -#define SONYPI_EVENT_FNKEY_ONLY 41 -#define SONYPI_EVENT_JOGDIAL_FAST_DOWN 42 -#define SONYPI_EVENT_JOGDIAL_FAST_UP 43 -#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED 44 -#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED 45 -#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN 46 -#define SONYPI_EVENT_JOGDIAL_VFAST_UP 47 -#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED 48 -#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED 49 -#define SONYPI_EVENT_ZOOM_PRESSED 50 -#define SONYPI_EVENT_THUMBPHRASE_PRESSED 51 -#define SONYPI_EVENT_MEYE_FACE 52 -#define SONYPI_EVENT_MEYE_OPPOSITE 53 -#define SONYPI_EVENT_MEMORYSTICK_INSERT 54 -#define SONYPI_EVENT_MEMORYSTICK_EJECT 55 -#define SONYPI_EVENT_ANYBUTTON_RELEASED 56 -#define SONYPI_EVENT_BATTERY_INSERT 57 -#define SONYPI_EVENT_BATTERY_REMOVE 58 -#define SONYPI_EVENT_FNKEY_RELEASED 59 -#define SONYPI_EVENT_WIRELESS_ON 60 -#define SONYPI_EVENT_WIRELESS_OFF 61 -#define SONYPI_EVENT_ZOOM_IN_PRESSED 62 -#define SONYPI_EVENT_ZOOM_OUT_PRESSED 63 -#define SONYPI_EVENT_CD_EJECT_PRESSED 64 -#define SONYPI_EVENT_MODEKEY_PRESSED 65 -#define SONYPI_EVENT_PKEY_P4 66 -#define SONYPI_EVENT_PKEY_P5 67 -#define SONYPI_EVENT_SETTINGKEY_PRESSED 68 -#define SONYPI_EVENT_VOLUME_INC_PRESSED 69 -#define SONYPI_EVENT_VOLUME_DEC_PRESSED 70 -#define SONYPI_EVENT_BRIGHTNESS_PRESSED 71 -#define SONYPI_EVENT_MEDIA_PRESSED 72 -#define SONYPI_EVENT_VENDOR_PRESSED 73 - -/* get/set brightness */ -#define SONYPI_IOCGBRT _IOR('v', 0, __u8) -#define SONYPI_IOCSBRT _IOW('v', 0, __u8) - -/* get battery full capacity/remaining capacity */ -#define SONYPI_IOCGBAT1CAP _IOR('v', 2, __u16) -#define SONYPI_IOCGBAT1REM _IOR('v', 3, __u16) -#define SONYPI_IOCGBAT2CAP _IOR('v', 4, __u16) -#define SONYPI_IOCGBAT2REM _IOR('v', 5, __u16) +#include -/* get battery flags: battery1/battery2/ac adapter present */ -#define SONYPI_BFLAGS_B1 0x01 -#define SONYPI_BFLAGS_B2 0x02 -#define SONYPI_BFLAGS_AC 0x04 -#define SONYPI_IOCGBATFLAGS _IOR('v', 7, __u8) - -/* get/set bluetooth subsystem state on/off */ -#define SONYPI_IOCGBLUE _IOR('v', 8, __u8) -#define SONYPI_IOCSBLUE _IOW('v', 9, __u8) - -/* get/set fan state on/off */ -#define SONYPI_IOCGFAN _IOR('v', 10, __u8) -#define SONYPI_IOCSFAN _IOW('v', 11, __u8) - -/* get temperature (C) */ -#define SONYPI_IOCGTEMP _IOR('v', 12, __u8) - -#ifdef __KERNEL__ /* used only for communication between v4l and sonypi */ @@ -166,6 +60,4 @@ #define SONYPI_COMMAND_GETCAMERAROMVERSION 18 /* obsolete */ #define SONYPI_COMMAND_GETCAMERAREVISION 19 /* obsolete */ -#endif /* __KERNEL__ */ - #endif /* _SONYPI_H_ */ diff --git a/include/linux/sound.h b/include/linux/sound.h index fae20ba01fbf..73ded040f1d7 100644 --- a/include/linux/sound.h +++ b/include/linux/sound.h @@ -1,33 +1,8 @@ #ifndef _LINUX_SOUND_H #define _LINUX_SOUND_H -/* - * Minor numbers for the sound driver. - */ - -#include +#include -#define SND_DEV_CTL 0 /* Control port /dev/mixer */ -#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM - synthesizer and MIDI output) */ -#define SND_DEV_MIDIN 2 /* Raw midi access */ -#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ -#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ -#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ -/* #define SND_DEV_STATUS 6 */ /* /dev/sndstat (obsolete) */ -#define SND_DEV_UNUSED 6 -#define SND_DEV_AWFM 7 /* Reserved */ -#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ -/* #define SND_DEV_SNDPROC 9 */ /* /dev/sndproc for programmable devices (not used) */ -/* #define SND_DEV_DMMIDI 9 */ -#define SND_DEV_SYNTH 9 /* Raw synth access /dev/synth (same as /dev/dmfm) */ -#define SND_DEV_DMFM 10 /* Raw synth access /dev/dmfm */ -#define SND_DEV_UNKNOWN11 11 -#define SND_DEV_ADSP 12 /* Like /dev/dsp (obsolete) */ -#define SND_DEV_AMIDI 13 /* Like /dev/midi (obsolete) */ -#define SND_DEV_ADMMIDI 14 /* Like /dev/dmmidi (onsolete) */ - -#ifdef __KERNEL__ /* * Sound core interface functions */ @@ -43,6 +18,4 @@ extern void unregister_sound_special(int unit); extern void unregister_sound_mixer(int unit); extern void unregister_sound_midi(int unit); extern void unregister_sound_dsp(int unit); -#endif /* __KERNEL__ */ - #endif /* _LINUX_SOUND_H */ diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h index dfcf86f013a9..96c79cbd79ef 100644 --- a/include/linux/soundcard.h +++ b/include/linux/soundcard.h @@ -1,5 +1,3 @@ -#ifndef SOUNDCARD_H -#define SOUNDCARD_H /* * Copyright by Hannu Savolainen 1993-1997 * @@ -23,174 +21,12 @@ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ +#ifndef SOUNDCARD_H +#define SOUNDCARD_H - -/* - * OSS interface version. With versions earlier than 3.6 this value is - * an integer with value less than 361. In versions 3.6 and later - * it's a six digit hexadecimal value. For example value - * of 0x030600 represents OSS version 3.6.0. - * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of - * the currently active driver. - */ -#define SOUND_VERSION 0x030802 -#define OPEN_SOUND_SYSTEM - -/* In Linux we need to be prepared for cross compiling */ -#include - -/* Endian macros. */ -#ifdef __KERNEL__ # include -#else -# include -#endif - -/* - * Supported card ID numbers (Should be somewhere else?) - */ - -#define SNDCARD_ADLIB 1 -#define SNDCARD_SB 2 -#define SNDCARD_PAS 3 -#define SNDCARD_GUS 4 -#define SNDCARD_MPU401 5 -#define SNDCARD_SB16 6 -#define SNDCARD_SB16MIDI 7 -#define SNDCARD_UART6850 8 -#define SNDCARD_GUS16 9 -#define SNDCARD_MSS 10 -#define SNDCARD_PSS 11 -#define SNDCARD_SSCAPE 12 -#define SNDCARD_PSS_MPU 13 -#define SNDCARD_PSS_MSS 14 -#define SNDCARD_SSCAPE_MSS 15 -#define SNDCARD_TRXPRO 16 -#define SNDCARD_TRXPRO_SB 17 -#define SNDCARD_TRXPRO_MPU 18 -#define SNDCARD_MAD16 19 -#define SNDCARD_MAD16_MPU 20 -#define SNDCARD_CS4232 21 -#define SNDCARD_CS4232_MPU 22 -#define SNDCARD_MAUI 23 -#define SNDCARD_PSEUDO_MSS 24 -#define SNDCARD_GUSPNP 25 -#define SNDCARD_UART401 26 -/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */ - -/*********************************** - * IOCTL Commands for /dev/sequencer - */ - -#ifndef _SIOWR -#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__))) -/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */ -#define SIOCPARM_MASK IOCPARM_MASK -#define SIOC_VOID IOC_VOID -#define SIOC_OUT IOC_OUT -#define SIOC_IN IOC_IN -#define SIOC_INOUT IOC_INOUT -#define _SIOC_SIZE _IOC_SIZE -#define _SIOC_DIR _IOC_DIR -#define _SIOC_NONE _IOC_NONE -#define _SIOC_READ _IOC_READ -#define _SIOC_WRITE _IOC_WRITE -#define _SIO _IO -#define _SIOR _IOR -#define _SIOW _IOW -#define _SIOWR _IOWR -#else +#include -/* Ioctl's have the command encoded in the lower word, - * and the size of any in or out parameters in the upper - * word. The high 2 bits of the upper word are used - * to encode the in/out status of the parameter; for now - * we restrict parameters to at most 8191 bytes. - */ -/* #define SIOCTYPE (0xff<<8) */ -#define SIOCPARM_MASK 0x1fff /* parameters must be < 8192 bytes */ -#define SIOC_VOID 0x00000000 /* no parameters */ -#define SIOC_OUT 0x20000000 /* copy out parameters */ -#define SIOC_IN 0x40000000 /* copy in parameters */ -#define SIOC_INOUT (SIOC_IN|SIOC_OUT) -/* the 0x20000000 is so we can distinguish new ioctl's from old */ -#define _SIO(x,y) ((int)(SIOC_VOID|(x<<8)|y)) -#define _SIOR(x,y,t) ((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -#define _SIOW(x,y,t) ((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -/* this should be _SIORW, but stdio got there first */ -#define _SIOWR(x,y,t) ((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y)) -#define _SIOC_SIZE(x) ((x>>16)&SIOCPARM_MASK) -#define _SIOC_DIR(x) (x & 0xf0000000) -#define _SIOC_NONE SIOC_VOID -#define _SIOC_READ SIOC_OUT -#define _SIOC_WRITE SIOC_IN -# endif /* _IOWR */ -#endif /* !_SIOWR */ - -#define SNDCTL_SEQ_RESET _SIO ('Q', 0) -#define SNDCTL_SEQ_SYNC _SIO ('Q', 1) -#define SNDCTL_SYNTH_INFO _SIOWR('Q', 2, struct synth_info) -#define SNDCTL_SEQ_CTRLRATE _SIOWR('Q', 3, int) /* Set/get timer resolution (HZ) */ -#define SNDCTL_SEQ_GETOUTCOUNT _SIOR ('Q', 4, int) -#define SNDCTL_SEQ_GETINCOUNT _SIOR ('Q', 5, int) -#define SNDCTL_SEQ_PERCMODE _SIOW ('Q', 6, int) -#define SNDCTL_FM_LOAD_INSTR _SIOW ('Q', 7, struct sbi_instrument) /* Obsolete. Don't use!!!!!! */ -#define SNDCTL_SEQ_TESTMIDI _SIOW ('Q', 8, int) -#define SNDCTL_SEQ_RESETSAMPLES _SIOW ('Q', 9, int) -#define SNDCTL_SEQ_NRSYNTHS _SIOR ('Q',10, int) -#define SNDCTL_SEQ_NRMIDIS _SIOR ('Q',11, int) -#define SNDCTL_MIDI_INFO _SIOWR('Q',12, struct midi_info) -#define SNDCTL_SEQ_THRESHOLD _SIOW ('Q',13, int) -#define SNDCTL_SYNTH_MEMAVL _SIOWR('Q',14, int) /* in=dev#, out=memsize */ -#define SNDCTL_FM_4OP_ENABLE _SIOW ('Q',15, int) /* in=dev# */ -#define SNDCTL_SEQ_PANIC _SIO ('Q',17) -#define SNDCTL_SEQ_OUTOFBAND _SIOW ('Q',18, struct seq_event_rec) -#define SNDCTL_SEQ_GETTIME _SIOR ('Q',19, int) -#define SNDCTL_SYNTH_ID _SIOWR('Q',20, struct synth_info) -#define SNDCTL_SYNTH_CONTROL _SIOWR('Q',21, struct synth_control) -#define SNDCTL_SYNTH_REMOVESAMPLE _SIOWR('Q',22, struct remove_sample) - -typedef struct synth_control -{ - int devno; /* Synthesizer # */ - char data[4000]; /* Device spesific command/data record */ -}synth_control; - -typedef struct remove_sample -{ - int devno; /* Synthesizer # */ - int bankno; /* MIDI bank # (0=General MIDI) */ - int instrno; /* MIDI instrument number */ -} remove_sample; - -typedef struct seq_event_rec { - unsigned char arr[8]; -} seq_event_rec; - -#define SNDCTL_TMR_TIMEBASE _SIOWR('T', 1, int) -#define SNDCTL_TMR_START _SIO ('T', 2) -#define SNDCTL_TMR_STOP _SIO ('T', 3) -#define SNDCTL_TMR_CONTINUE _SIO ('T', 4) -#define SNDCTL_TMR_TEMPO _SIOWR('T', 5, int) -#define SNDCTL_TMR_SOURCE _SIOWR('T', 6, int) -# define TMR_INTERNAL 0x00000001 -# define TMR_EXTERNAL 0x00000002 -# define TMR_MODE_MIDI 0x00000010 -# define TMR_MODE_FSK 0x00000020 -# define TMR_MODE_CLS 0x00000040 -# define TMR_MODE_SMPTE 0x00000080 -#define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int) -#define SNDCTL_TMR_SELECT _SIOW ('T', 8, int) - -/* - * Some big endian/little endian handling macros - */ - -#define _LINUX_PATCHKEY_H_INDIRECT -#include -#undef _LINUX_PATCHKEY_H_INDIRECT - -#if defined(__KERNEL__) # if defined(__BIG_ENDIAN) # define AFMT_S16_NE AFMT_S16_BE # elif defined(__LITTLE_ENDIAN) @@ -198,1095 +34,4 @@ typedef struct seq_event_rec { # else # error "could not determine byte order" # endif -#else -# if defined(__BYTE_ORDER) -# if __BYTE_ORDER == __BIG_ENDIAN -# define AFMT_S16_NE AFMT_S16_BE -# elif __BYTE_ORDER == __LITTLE_ENDIAN -# define AFMT_S16_NE AFMT_S16_LE -# else -# error "could not determine byte order" -# endif -# endif -#endif - -/* - * Sample loading mechanism for internal synthesizers (/dev/sequencer) - * The following patch_info structure has been designed to support - * Gravis UltraSound. It tries to be universal format for uploading - * sample based patches but is probably too limited. - * - * (PBD) As Hannu guessed, the GUS structure is too limited for - * the WaveFront, but this is the right place for a constant definition. - */ - -struct patch_info { - unsigned short key; /* Use WAVE_PATCH here */ -#define WAVE_PATCH _PATCHKEY(0x04) -#define GUS_PATCH WAVE_PATCH -#define WAVEFRONT_PATCH _PATCHKEY(0x06) - - short device_no; /* Synthesizer number */ - short instr_no; /* Midi pgm# */ - - unsigned int mode; -/* - * The least significant byte has the same format than the GUS .PAT - * files - */ -#define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */ -#define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */ -#define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */ -#define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */ -#define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */ -#define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/ -#define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */ -#define WAVE_FAST_RELEASE 0x80 /* bit 7 = Shut off immediately after note off */ - /* (use the env_rate/env_offs fields). */ -/* Linux specific bits */ -#define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */ -#define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */ -#define WAVE_SCALE 0x00040000 /* The scaling info is valid */ -#define WAVE_FRACTIONS 0x00080000 /* Fraction information is valid */ -/* Reserved bits */ -#define WAVE_ROM 0x40000000 /* For future use */ -#define WAVE_MULAW 0x20000000 /* For future use */ -/* Other bits must be zeroed */ - - int len; /* Size of the wave data in bytes */ - int loop_start, loop_end; /* Byte offsets from the beginning */ - -/* - * The base_freq and base_note fields are used when computing the - * playback speed for a note. The base_note defines the tone frequency - * which is heard if the sample is played using the base_freq as the - * playback speed. - * - * The low_note and high_note fields define the minimum and maximum note - * frequencies for which this sample is valid. It is possible to define - * more than one samples for an instrument number at the same time. The - * low_note and high_note fields are used to select the most suitable one. - * - * The fields base_note, high_note and low_note should contain - * the note frequency multiplied by 1000. For example value for the - * middle A is 440*1000. - */ - - unsigned int base_freq; - unsigned int base_note; - unsigned int high_note; - unsigned int low_note; - int panning; /* -128=left, 127=right */ - int detuning; - -/* New fields introduced in version 1.99.5 */ - - /* Envelope. Enabled by mode bit WAVE_ENVELOPES */ - unsigned char env_rate[ 6 ]; /* GUS HW ramping rate */ - unsigned char env_offset[ 6 ]; /* 255 == 100% */ - - /* - * The tremolo, vibrato and scale info are not supported yet. - * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or - * WAVE_SCALE - */ - - unsigned char tremolo_sweep; - unsigned char tremolo_rate; - unsigned char tremolo_depth; - - unsigned char vibrato_sweep; - unsigned char vibrato_rate; - unsigned char vibrato_depth; - - int scale_frequency; - unsigned int scale_factor; /* from 0 to 2048 or 0 to 2 */ - - int volume; - int fractions; - int reserved1; - int spare[2]; - char data[1]; /* The waveform data starts here */ - }; - -struct sysex_info { - short key; /* Use SYSEX_PATCH or MAUI_PATCH here */ -#define SYSEX_PATCH _PATCHKEY(0x05) -#define MAUI_PATCH _PATCHKEY(0x06) - short device_no; /* Synthesizer number */ - int len; /* Size of the sysex data in bytes */ - unsigned char data[1]; /* Sysex data starts here */ - }; - -/* - * /dev/sequencer input events. - * - * The data written to the /dev/sequencer is a stream of events. Events - * are records of 4 or 8 bytes. The first byte defines the size. - * Any number of events can be written with a write call. There - * is a set of macros for sending these events. Use these macros if you - * want to maximize portability of your program. - * - * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events. - * (All input events are currently 4 bytes long. Be prepared to support - * 8 byte events also. If you receive any event having first byte >= 128, - * it's a 8 byte event. - * - * The events are documented at the end of this file. - * - * Normal events (4 bytes) - * There is also a 8 byte version of most of the 4 byte events. The - * 8 byte one is recommended. - */ -#define SEQ_NOTEOFF 0 -#define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */ -#define SEQ_NOTEON 1 -#define SEQ_FMNOTEON SEQ_NOTEON -#define SEQ_WAIT TMR_WAIT_ABS -#define SEQ_PGMCHANGE 3 -#define SEQ_FMPGMCHANGE SEQ_PGMCHANGE -#define SEQ_SYNCTIMER TMR_START -#define SEQ_MIDIPUTC 5 -#define SEQ_DRUMON 6 /*** OBSOLETE ***/ -#define SEQ_DRUMOFF 7 /*** OBSOLETE ***/ -#define SEQ_ECHO TMR_ECHO /* For synching programs with output */ -#define SEQ_AFTERTOUCH 9 -#define SEQ_CONTROLLER 10 - -/******************************************* - * Midi controller numbers - ******************************************* - * Controllers 0 to 31 (0x00 to 0x1f) and - * 32 to 63 (0x20 to 0x3f) are continuous - * controllers. - * In the MIDI 1.0 these controllers are sent using - * two messages. Controller numbers 0 to 31 are used - * to send the MSB and the controller numbers 32 to 63 - * are for the LSB. Note that just 7 bits are used in MIDI bytes. - */ - -#define CTL_BANK_SELECT 0x00 -#define CTL_MODWHEEL 0x01 -#define CTL_BREATH 0x02 -/* undefined 0x03 */ -#define CTL_FOOT 0x04 -#define CTL_PORTAMENTO_TIME 0x05 -#define CTL_DATA_ENTRY 0x06 -#define CTL_MAIN_VOLUME 0x07 -#define CTL_BALANCE 0x08 -/* undefined 0x09 */ -#define CTL_PAN 0x0a -#define CTL_EXPRESSION 0x0b -/* undefined 0x0c */ -/* undefined 0x0d */ -/* undefined 0x0e */ -/* undefined 0x0f */ -#define CTL_GENERAL_PURPOSE1 0x10 -#define CTL_GENERAL_PURPOSE2 0x11 -#define CTL_GENERAL_PURPOSE3 0x12 -#define CTL_GENERAL_PURPOSE4 0x13 -/* undefined 0x14 - 0x1f */ - -/* undefined 0x20 */ -/* The controller numbers 0x21 to 0x3f are reserved for the */ -/* least significant bytes of the controllers 0x00 to 0x1f. */ -/* These controllers are not recognised by the driver. */ - -/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */ -/* 0=OFF and 127=ON (intermediate values are possible) */ -#define CTL_DAMPER_PEDAL 0x40 -#define CTL_SUSTAIN 0x40 /* Alias */ -#define CTL_HOLD 0x40 /* Alias */ -#define CTL_PORTAMENTO 0x41 -#define CTL_SOSTENUTO 0x42 -#define CTL_SOFT_PEDAL 0x43 -/* undefined 0x44 */ -#define CTL_HOLD2 0x45 -/* undefined 0x46 - 0x4f */ - -#define CTL_GENERAL_PURPOSE5 0x50 -#define CTL_GENERAL_PURPOSE6 0x51 -#define CTL_GENERAL_PURPOSE7 0x52 -#define CTL_GENERAL_PURPOSE8 0x53 -/* undefined 0x54 - 0x5a */ -#define CTL_EXT_EFF_DEPTH 0x5b -#define CTL_TREMOLO_DEPTH 0x5c -#define CTL_CHORUS_DEPTH 0x5d -#define CTL_DETUNE_DEPTH 0x5e -#define CTL_CELESTE_DEPTH 0x5e /* Alias for the above one */ -#define CTL_PHASER_DEPTH 0x5f -#define CTL_DATA_INCREMENT 0x60 -#define CTL_DATA_DECREMENT 0x61 -#define CTL_NONREG_PARM_NUM_LSB 0x62 -#define CTL_NONREG_PARM_NUM_MSB 0x63 -#define CTL_REGIST_PARM_NUM_LSB 0x64 -#define CTL_REGIST_PARM_NUM_MSB 0x65 -/* undefined 0x66 - 0x78 */ -/* reserved 0x79 - 0x7f */ - -/* Pseudo controllers (not midi compatible) */ -#define CTRL_PITCH_BENDER 255 -#define CTRL_PITCH_BENDER_RANGE 254 -#define CTRL_EXPRESSION 253 /* Obsolete */ -#define CTRL_MAIN_VOLUME 252 /* Obsolete */ -#define SEQ_BALANCE 11 -#define SEQ_VOLMODE 12 - -/* - * Volume mode decides how volumes are used - */ - -#define VOL_METHOD_ADAGIO 1 -#define VOL_METHOD_LINEAR 2 - -/* - * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as - * input events. - */ - -/* - * Event codes 0xf0 to 0xfc are reserved for future extensions. - */ - -#define SEQ_FULLSIZE 0xfd /* Long events */ -/* - * SEQ_FULLSIZE events are used for loading patches/samples to the - * synthesizer devices. These events are passed directly to the driver - * of the associated synthesizer device. There is no limit to the size - * of the extended events. These events are not queued but executed - * immediately when the write() is called (execution can take several - * seconds of time). - * - * When a SEQ_FULLSIZE message is written to the device, it must - * be written using exactly one write() call. Other events cannot - * be mixed to the same write. - * - * For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the - * /dev/sequencer. Don't write other data together with the instrument structure - * Set the key field of the structure to FM_PATCH. The device field is used to - * route the patch to the corresponding device. - * - * For wave table use struct patch_info. Initialize the key field - * to WAVE_PATCH. - */ -#define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */ -#define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */ - -/* - * Record for FM patches - */ - -typedef unsigned char sbi_instr_data[32]; - -struct sbi_instrument { - unsigned short key; /* FM_PATCH or OPL3_PATCH */ -#define FM_PATCH _PATCHKEY(0x01) -#define OPL3_PATCH _PATCHKEY(0x03) - short device; /* Synth# (0-4) */ - int channel; /* Program# to be initialized */ - sbi_instr_data operators; /* Register settings for operator cells (.SBI format) */ - }; - -struct synth_info { /* Read only */ - char name[30]; - int device; /* 0-N. INITIALIZE BEFORE CALLING */ - int synth_type; -#define SYNTH_TYPE_FM 0 -#define SYNTH_TYPE_SAMPLE 1 -#define SYNTH_TYPE_MIDI 2 /* Midi interface */ - - int synth_subtype; -#define FM_TYPE_ADLIB 0x00 -#define FM_TYPE_OPL3 0x01 -#define MIDI_TYPE_MPU401 0x401 - -#define SAMPLE_TYPE_BASIC 0x10 -#define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC -#define SAMPLE_TYPE_WAVEFRONT 0x11 - - int perc_mode; /* No longer supported */ - int nr_voices; - int nr_drums; /* Obsolete field */ - int instr_bank_size; - unsigned int capabilities; -#define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */ -#define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */ -#define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */ - int dummies[19]; /* Reserve space */ - }; - -struct sound_timer_info { - char name[32]; - int caps; - }; - -#define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */ - -struct midi_info { - char name[30]; - int device; /* 0-N. INITIALIZE BEFORE CALLING */ - unsigned int capabilities; /* To be defined later */ - int dev_type; - int dummies[18]; /* Reserve space */ - }; - -/******************************************** - * ioctl commands for the /dev/midi## - */ -typedef struct { - unsigned char cmd; - char nr_args, nr_returns; - unsigned char data[30]; - } mpu_command_rec; - -#define SNDCTL_MIDI_PRETIME _SIOWR('m', 0, int) -#define SNDCTL_MIDI_MPUMODE _SIOWR('m', 1, int) -#define SNDCTL_MIDI_MPUCMD _SIOWR('m', 2, mpu_command_rec) - -/******************************************** - * IOCTL commands for /dev/dsp and /dev/audio - */ - -#define SNDCTL_DSP_RESET _SIO ('P', 0) -#define SNDCTL_DSP_SYNC _SIO ('P', 1) -#define SNDCTL_DSP_SPEED _SIOWR('P', 2, int) -#define SNDCTL_DSP_STEREO _SIOWR('P', 3, int) -#define SNDCTL_DSP_GETBLKSIZE _SIOWR('P', 4, int) -#define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT -#define SNDCTL_DSP_CHANNELS _SIOWR('P', 6, int) -#define SOUND_PCM_WRITE_CHANNELS SNDCTL_DSP_CHANNELS -#define SOUND_PCM_WRITE_FILTER _SIOWR('P', 7, int) -#define SNDCTL_DSP_POST _SIO ('P', 8) -#define SNDCTL_DSP_SUBDIVIDE _SIOWR('P', 9, int) -#define SNDCTL_DSP_SETFRAGMENT _SIOWR('P',10, int) - -/* Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */ -#define SNDCTL_DSP_GETFMTS _SIOR ('P',11, int) /* Returns a mask */ -#define SNDCTL_DSP_SETFMT _SIOWR('P',5, int) /* Selects ONE fmt*/ -# define AFMT_QUERY 0x00000000 /* Return current fmt */ -# define AFMT_MU_LAW 0x00000001 -# define AFMT_A_LAW 0x00000002 -# define AFMT_IMA_ADPCM 0x00000004 -# define AFMT_U8 0x00000008 -# define AFMT_S16_LE 0x00000010 /* Little endian signed 16*/ -# define AFMT_S16_BE 0x00000020 /* Big endian signed 16 */ -# define AFMT_S8 0x00000040 -# define AFMT_U16_LE 0x00000080 /* Little endian U16 */ -# define AFMT_U16_BE 0x00000100 /* Big endian U16 */ -# define AFMT_MPEG 0x00000200 /* MPEG (2) audio */ -# define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */ - -/* - * Buffer status queries. - */ -typedef struct audio_buf_info { - int fragments; /* # of available fragments (partially usend ones not counted) */ - int fragstotal; /* Total # of fragments allocated */ - int fragsize; /* Size of a fragment in bytes */ - - int bytes; /* Available space in bytes (includes partially used fragments) */ - /* Note! 'bytes' could be more than fragments*fragsize */ - } audio_buf_info; - -#define SNDCTL_DSP_GETOSPACE _SIOR ('P',12, audio_buf_info) -#define SNDCTL_DSP_GETISPACE _SIOR ('P',13, audio_buf_info) -#define SNDCTL_DSP_NONBLOCK _SIO ('P',14) -#define SNDCTL_DSP_GETCAPS _SIOR ('P',15, int) -# define DSP_CAP_REVISION 0x000000ff /* Bits for revision level (0 to 255) */ -# define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */ -# define DSP_CAP_REALTIME 0x00000200 /* Real time capability */ -# define DSP_CAP_BATCH 0x00000400 /* Device has some kind of */ - /* internal buffers which may */ - /* cause some delays and */ - /* decrease precision of timing */ -# define DSP_CAP_COPROC 0x00000800 /* Has a coprocessor */ - /* Sometimes it's a DSP */ - /* but usually not */ -# define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */ -# define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */ -# define DSP_CAP_MULTI 0x00004000 /* support multiple open */ -# define DSP_CAP_BIND 0x00008000 /* channel binding to front/rear/cneter/lfe */ - - -#define SNDCTL_DSP_GETTRIGGER _SIOR ('P',16, int) -#define SNDCTL_DSP_SETTRIGGER _SIOW ('P',16, int) -# define PCM_ENABLE_INPUT 0x00000001 -# define PCM_ENABLE_OUTPUT 0x00000002 - -typedef struct count_info { - int bytes; /* Total # of bytes processed */ - int blocks; /* # of fragment transitions since last time */ - int ptr; /* Current DMA pointer value */ - } count_info; - -#define SNDCTL_DSP_GETIPTR _SIOR ('P',17, count_info) -#define SNDCTL_DSP_GETOPTR _SIOR ('P',18, count_info) - -typedef struct buffmem_desc { - unsigned *buffer; - int size; - } buffmem_desc; -#define SNDCTL_DSP_MAPINBUF _SIOR ('P', 19, buffmem_desc) -#define SNDCTL_DSP_MAPOUTBUF _SIOR ('P', 20, buffmem_desc) -#define SNDCTL_DSP_SETSYNCRO _SIO ('P', 21) -#define SNDCTL_DSP_SETDUPLEX _SIO ('P', 22) -#define SNDCTL_DSP_GETODELAY _SIOR ('P', 23, int) - -#define SNDCTL_DSP_GETCHANNELMASK _SIOWR('P', 64, int) -#define SNDCTL_DSP_BIND_CHANNEL _SIOWR('P', 65, int) -# define DSP_BIND_QUERY 0x00000000 -# define DSP_BIND_FRONT 0x00000001 -# define DSP_BIND_SURR 0x00000002 -# define DSP_BIND_CENTER_LFE 0x00000004 -# define DSP_BIND_HANDSET 0x00000008 -# define DSP_BIND_MIC 0x00000010 -# define DSP_BIND_MODEM1 0x00000020 -# define DSP_BIND_MODEM2 0x00000040 -# define DSP_BIND_I2S 0x00000080 -# define DSP_BIND_SPDIF 0x00000100 - -#define SNDCTL_DSP_SETSPDIF _SIOW ('P', 66, int) -#define SNDCTL_DSP_GETSPDIF _SIOR ('P', 67, int) -# define SPDIF_PRO 0x0001 -# define SPDIF_N_AUD 0x0002 -# define SPDIF_COPY 0x0004 -# define SPDIF_PRE 0x0008 -# define SPDIF_CC 0x07f0 -# define SPDIF_L 0x0800 -# define SPDIF_DRS 0x4000 -# define SPDIF_V 0x8000 - -/* - * Application's profile defines the way how playback underrun situations should be handled. - * - * APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the - * playback buffer whenever an underrun occurs. This consumes some time - * prevents looping the existing buffer. - * APF_CPUINTENS is intended to be set by CPU intensive applications which - * are likely to run out of time occasionally. In this mode the buffer cleanup is - * disabled which saves CPU time but also let's the previous buffer content to - * be played during the "pause" after the underrun. - */ -#define SNDCTL_DSP_PROFILE _SIOW ('P', 23, int) -#define APF_NORMAL 0 /* Normal applications */ -#define APF_NETWORK 1 /* Underruns probably caused by an "external" delay */ -#define APF_CPUINTENS 2 /* Underruns probably caused by "overheating" the CPU */ - -#define SOUND_PCM_READ_RATE _SIOR ('P', 2, int) -#define SOUND_PCM_READ_CHANNELS _SIOR ('P', 6, int) -#define SOUND_PCM_READ_BITS _SIOR ('P', 5, int) -#define SOUND_PCM_READ_FILTER _SIOR ('P', 7, int) - -/* Some alias names */ -#define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT -#define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED -#define SOUND_PCM_POST SNDCTL_DSP_POST -#define SOUND_PCM_RESET SNDCTL_DSP_RESET -#define SOUND_PCM_SYNC SNDCTL_DSP_SYNC -#define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE -#define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT -#define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS -#define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT -#define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE -#define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE -#define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK -#define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS -#define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER -#define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER -#define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO -#define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR -#define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR -#define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF -#define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF - -/* - * ioctl calls to be used in communication with coprocessors and - * DSP chips. - */ - -typedef struct copr_buffer { - int command; /* Set to 0 if not used */ - int flags; -#define CPF_NONE 0x0000 -#define CPF_FIRST 0x0001 /* First block */ -#define CPF_LAST 0x0002 /* Last block */ - int len; - int offs; /* If required by the device (0 if not used) */ - - unsigned char data[4000]; /* NOTE! 4000 is not 4k */ - } copr_buffer; - -typedef struct copr_debug_buf { - int command; /* Used internally. Set to 0 */ - int parm1; - int parm2; - int flags; - int len; /* Length of data in bytes */ - } copr_debug_buf; - -typedef struct copr_msg { - int len; - unsigned char data[4000]; - } copr_msg; - -#define SNDCTL_COPR_RESET _SIO ('C', 0) -#define SNDCTL_COPR_LOAD _SIOWR('C', 1, copr_buffer) -#define SNDCTL_COPR_RDATA _SIOWR('C', 2, copr_debug_buf) -#define SNDCTL_COPR_RCODE _SIOWR('C', 3, copr_debug_buf) -#define SNDCTL_COPR_WDATA _SIOW ('C', 4, copr_debug_buf) -#define SNDCTL_COPR_WCODE _SIOW ('C', 5, copr_debug_buf) -#define SNDCTL_COPR_RUN _SIOWR('C', 6, copr_debug_buf) -#define SNDCTL_COPR_HALT _SIOWR('C', 7, copr_debug_buf) -#define SNDCTL_COPR_SENDMSG _SIOWR('C', 8, copr_msg) -#define SNDCTL_COPR_RCVMSG _SIOR ('C', 9, copr_msg) - -/********************************************* - * IOCTL commands for /dev/mixer - */ - -/* - * Mixer devices - * - * There can be up to 20 different analog mixer channels. The - * SOUND_MIXER_NRDEVICES gives the currently supported maximum. - * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells - * the devices supported by the particular mixer. - */ - -#define SOUND_MIXER_NRDEVICES 25 -#define SOUND_MIXER_VOLUME 0 -#define SOUND_MIXER_BASS 1 -#define SOUND_MIXER_TREBLE 2 -#define SOUND_MIXER_SYNTH 3 -#define SOUND_MIXER_PCM 4 -#define SOUND_MIXER_SPEAKER 5 -#define SOUND_MIXER_LINE 6 -#define SOUND_MIXER_MIC 7 -#define SOUND_MIXER_CD 8 -#define SOUND_MIXER_IMIX 9 /* Recording monitor */ -#define SOUND_MIXER_ALTPCM 10 -#define SOUND_MIXER_RECLEV 11 /* Recording level */ -#define SOUND_MIXER_IGAIN 12 /* Input gain */ -#define SOUND_MIXER_OGAIN 13 /* Output gain */ -/* - * The AD1848 codec and compatibles have three line level inputs - * (line, aux1 and aux2). Since each card manufacturer have assigned - * different meanings to these inputs, it's inpractical to assign - * specific meanings (line, cd, synth etc.) to them. - */ -#define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */ -#define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */ -#define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */ -#define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */ -#define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */ -#define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */ -#define SOUND_MIXER_PHONEIN 20 /* Phone input */ -#define SOUND_MIXER_PHONEOUT 21 /* Phone output */ -#define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */ -#define SOUND_MIXER_RADIO 23 /* Radio in */ -#define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */ - -/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */ -/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */ -#define SOUND_ONOFF_MIN 28 -#define SOUND_ONOFF_MAX 30 - -/* Note! Number 31 cannot be used since the sign bit is reserved */ -#define SOUND_MIXER_NONE 31 - -/* - * The following unsupported macros are no longer functional. - * Use SOUND_MIXER_PRIVATE# macros in future. - */ -#define SOUND_MIXER_ENHANCE SOUND_MIXER_NONE -#define SOUND_MIXER_MUTE SOUND_MIXER_NONE -#define SOUND_MIXER_LOUD SOUND_MIXER_NONE - - -#define SOUND_DEVICE_LABELS {"Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \ - "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \ - "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \ - "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"} - -#define SOUND_DEVICE_NAMES {"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \ - "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \ - "line1", "line2", "line3", "dig1", "dig2", "dig3", \ - "phin", "phout", "video", "radio", "monitor"} - -/* Device bitmask identifiers */ - -#define SOUND_MIXER_RECSRC 0xff /* Arg contains a bit for each recording source */ -#define SOUND_MIXER_DEVMASK 0xfe /* Arg contains a bit for each supported device */ -#define SOUND_MIXER_RECMASK 0xfd /* Arg contains a bit for each supported recording source */ -#define SOUND_MIXER_CAPS 0xfc -# define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only one recording source at a time */ -#define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */ -#define SOUND_MIXER_OUTSRC 0xfa /* Arg contains a bit for each input source to output */ -#define SOUND_MIXER_OUTMASK 0xf9 /* Arg contains a bit for each supported input source to output */ - -/* Device mask bits */ - -#define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME) -#define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS) -#define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE) -#define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH) -#define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM) -#define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER) -#define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE) -#define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC) -#define SOUND_MASK_CD (1 << SOUND_MIXER_CD) -#define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX) -#define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM) -#define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV) -#define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN) -#define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN) -#define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1) -#define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2) -#define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3) -#define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1) -#define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2) -#define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3) -#define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN) -#define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT) -#define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO) -#define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO) -#define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR) - -/* Obsolete macros */ -#define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE) -#define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE) -#define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD) - -#define MIXER_READ(dev) _SIOR('M', dev, int) -#define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME) -#define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS) -#define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE) -#define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH) -#define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM) -#define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER) -#define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE) -#define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC) -#define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD) -#define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX) -#define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM) -#define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV) -#define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN) -#define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN) -#define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1) -#define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2) -#define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3) - -/* Obsolete macros */ -#define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE) -#define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE) -#define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD) - -#define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC) -#define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK) -#define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK) -#define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS) -#define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS) - -#define MIXER_WRITE(dev) _SIOWR('M', dev, int) -#define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME) -#define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS) -#define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE) -#define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH) -#define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM) -#define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER) -#define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE) -#define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC) -#define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD) -#define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX) -#define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM) -#define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV) -#define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN) -#define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN) -#define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1) -#define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2) -#define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3) - -/* Obsolete macros */ -#define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE) -#define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE) -#define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD) - -#define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) - -typedef struct mixer_info -{ - char id[16]; - char name[32]; - int modify_counter; - int fillers[10]; -} mixer_info; - -typedef struct _old_mixer_info /* Obsolete */ -{ - char id[16]; - char name[32]; -} _old_mixer_info; - -#define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info) -#define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info) - -/* - * A mechanism for accessing "proprietary" mixer features. This method - * permits passing 128 bytes of arbitrary data between a mixer application - * and the mixer driver. Interpretation of the record is defined by - * the particular mixer driver. - */ -typedef unsigned char mixer_record[128]; - -#define SOUND_MIXER_ACCESS _SIOWR('M', 102, mixer_record) - -/* - * Two ioctls for special souncard function - */ -#define SOUND_MIXER_AGC _SIOWR('M', 103, int) -#define SOUND_MIXER_3DSE _SIOWR('M', 104, int) - -/* - * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers. - * These features can be used when accessing device specific features. - */ -#define SOUND_MIXER_PRIVATE1 _SIOWR('M', 111, int) -#define SOUND_MIXER_PRIVATE2 _SIOWR('M', 112, int) -#define SOUND_MIXER_PRIVATE3 _SIOWR('M', 113, int) -#define SOUND_MIXER_PRIVATE4 _SIOWR('M', 114, int) -#define SOUND_MIXER_PRIVATE5 _SIOWR('M', 115, int) - -/* - * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used - * for querying current mixer settings from the driver and for loading - * default volume settings _prior_ activating the mixer (loading - * doesn't affect current state of the mixer hardware). These calls - * are for internal use only. - */ - -typedef struct mixer_vol_table { - int num; /* Index to volume table */ - char name[32]; - int levels[32]; -} mixer_vol_table; - -#define SOUND_MIXER_GETLEVELS _SIOWR('M', 116, mixer_vol_table) -#define SOUND_MIXER_SETLEVELS _SIOWR('M', 117, mixer_vol_table) - -/* - * An ioctl for identifying the driver version. It will return value - * of the SOUND_VERSION macro used when compiling the driver. - * This call was introduced in OSS version 3.6 and it will not work - * with earlier versions (returns EINVAL). - */ -#define OSS_GETVERSION _SIOR ('M', 118, int) - -/* - * Level 2 event types for /dev/sequencer - */ - -/* - * The 4 most significant bits of byte 0 specify the class of - * the event: - * - * 0x8X = system level events, - * 0x9X = device/port specific events, event[1] = device/port, - * The last 4 bits give the subtype: - * 0x02 = Channel event (event[3] = chn). - * 0x01 = note event (event[4] = note). - * (0x01 is not used alone but always with bit 0x02). - * event[2] = MIDI message code (0x80=note off etc.) - * - */ - -#define EV_SEQ_LOCAL 0x80 -#define EV_TIMING 0x81 -#define EV_CHN_COMMON 0x92 -#define EV_CHN_VOICE 0x93 -#define EV_SYSEX 0x94 -/* - * Event types 200 to 220 are reserved for application use. - * These numbers will not be used by the driver. - */ - -/* - * Events for event type EV_CHN_VOICE - */ - -#define MIDI_NOTEOFF 0x80 -#define MIDI_NOTEON 0x90 -#define MIDI_KEY_PRESSURE 0xA0 - -/* - * Events for event type EV_CHN_COMMON - */ - -#define MIDI_CTL_CHANGE 0xB0 -#define MIDI_PGM_CHANGE 0xC0 -#define MIDI_CHN_PRESSURE 0xD0 -#define MIDI_PITCH_BEND 0xE0 - -#define MIDI_SYSTEM_PREFIX 0xF0 - -/* - * Timer event types - */ -#define TMR_WAIT_REL 1 /* Time relative to the prev time */ -#define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */ -#define TMR_STOP 3 -#define TMR_START 4 -#define TMR_CONTINUE 5 -#define TMR_TEMPO 6 -#define TMR_ECHO 8 -#define TMR_CLOCK 9 /* MIDI clock */ -#define TMR_SPP 10 /* Song position pointer */ -#define TMR_TIMESIG 11 /* Time signature */ - -/* - * Local event types - */ -#define LOCL_STARTAUDIO 1 - -#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS) -/* - * Some convenience macros to simplify programming of the - * /dev/sequencer interface - * - * This is a legacy interface for applications written against - * the OSSlib-3.8 style interface. It is no longer possible - * to actually link against OSSlib with this header, but we - * still provide these macros for programs using them. - * - * If you want to use OSSlib, it is recommended that you get - * the GPL version of OSS-4.x and build against that version - * of the header. - * - * We redefine the extern keyword so that make headers_check - * does not complain about SEQ_USE_EXTBUF. - */ -#define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() - -void seqbuf_dump(void); /* This function must be provided by programs */ - -#define SEQ_PM_DEFINES int __foo_bar___ - -#define SEQ_LOAD_GMINSTR(dev, instr) -#define SEQ_LOAD_GMDRUM(dev, drum) - -#define _SEQ_EXTERN extern -#define SEQ_USE_EXTBUF() \ - _SEQ_EXTERN unsigned char _seqbuf[]; \ - _SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr - -#ifndef USE_SIMPLE_MACROS -/* Sample seqbuf_dump() implementation: - * - * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes - * - * int seqfd; -- The file descriptor for /dev/sequencer. - * - * void - * seqbuf_dump () - * { - * if (_seqbufptr) - * if (write (seqfd, _seqbuf, _seqbufptr) == -1) - * { - * perror ("write /dev/sequencer"); - * exit (-1); - * } - * _seqbufptr = 0; - * } - */ - -#define SEQ_DEFINEBUF(len) unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0 -#define _SEQ_NEEDBUF(len) if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump() -#define _SEQ_ADVBUF(len) _seqbufptr += len -#define SEQ_DUMPBUF seqbuf_dump -#else -/* - * This variation of the sequencer macros is used just to format one event - * using fixed buffer. - * - * The program using the macro library must define the following macros before - * using this library. - * - * #define _seqbuf name of the buffer (unsigned char[]) - * #define _SEQ_ADVBUF(len) If the applic needs to know the exact - * size of the event, this macro can be used. - * Otherwise this must be defined as empty. - * #define _seqbufptr Define the name of index variable or 0 if - * not required. - */ -#define _SEQ_NEEDBUF(len) /* empty */ -#endif - -#define SEQ_VOLUME_MODE(dev, mode) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ - _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\ - _seqbuf[_seqbufptr+2] = (dev);\ - _seqbuf[_seqbufptr+3] = (mode);\ - _seqbuf[_seqbufptr+4] = 0;\ - _seqbuf[_seqbufptr+5] = 0;\ - _seqbuf[_seqbufptr+6] = 0;\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} - -/* - * Midi voice messages - */ - -#define _CHN_VOICE(dev, event, chn, note, parm) \ - {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_CHN_VOICE;\ - _seqbuf[_seqbufptr+1] = (dev);\ - _seqbuf[_seqbufptr+2] = (event);\ - _seqbuf[_seqbufptr+3] = (chn);\ - _seqbuf[_seqbufptr+4] = (note);\ - _seqbuf[_seqbufptr+5] = (parm);\ - _seqbuf[_seqbufptr+6] = (0);\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} - -#define SEQ_START_NOTE(dev, chn, note, vol) \ - _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol) - -#define SEQ_STOP_NOTE(dev, chn, note, vol) \ - _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol) - -#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \ - _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure) - -/* - * Midi channel messages - */ - -#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \ - {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_CHN_COMMON;\ - _seqbuf[_seqbufptr+1] = (dev);\ - _seqbuf[_seqbufptr+2] = (event);\ - _seqbuf[_seqbufptr+3] = (chn);\ - _seqbuf[_seqbufptr+4] = (p1);\ - _seqbuf[_seqbufptr+5] = (p2);\ - *(short *)&_seqbuf[_seqbufptr+6] = (w14);\ - _SEQ_ADVBUF(8);} -/* - * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits - * sending any MIDI bytes but it's absolutely not possible. Trying to do - * so _will_ cause problems with MPU401 intelligent mode). - * - * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be - * sent by calling SEQ_SYSEX() several times (there must be no other events - * between them). First sysex fragment must have 0xf0 in the first byte - * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte - * between these sysex start and end markers cannot be larger than 0x7f. Also - * lengths of each fragments (except the last one) must be 6. - * - * Breaking the above rules may work with some MIDI ports but is likely to - * cause fatal problems with some other devices (such as MPU401). - */ -#define SEQ_SYSEX(dev, buf, len) \ - {int ii, ll=(len); \ - unsigned char *bufp=buf;\ - if (ll>6)ll=6;\ - _SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr] = EV_SYSEX;\ - _seqbuf[_seqbufptr+1] = (dev);\ - for(ii=0;ii>8)&0xff);\ - _seqbuf[_seqbufptr+7] = 0;\ - _SEQ_ADVBUF(8);} -/* - * The following 5 macros are incorrectly implemented and obsolete. - * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead. - */ -#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value) -#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value) -#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128) -#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) -#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) - -/* - * Timing and synchronization macros - */ - -#define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr+0] = EV_TIMING; \ - _seqbuf[_seqbufptr+1] = (ev); \ - _seqbuf[_seqbufptr+2] = 0;\ - _seqbuf[_seqbufptr+3] = 0;\ - *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ - _SEQ_ADVBUF(8);} - -#define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0) -#define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0) -#define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0) -#define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks) -#define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks) -#define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key) -#define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value) -#define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos) -#define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig) - -/* - * Local control events - */ - -#define _LOCAL_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ - _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \ - _seqbuf[_seqbufptr+1] = (ev); \ - _seqbuf[_seqbufptr+2] = 0;\ - _seqbuf[_seqbufptr+3] = 0;\ - *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ - _SEQ_ADVBUF(8);} - -#define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask) -/* - * Events for the level 1 interface only - */ - -#define SEQ_MIDIOUT(device, byte) {_SEQ_NEEDBUF(4);\ - _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\ - _seqbuf[_seqbufptr+1] = (byte);\ - _seqbuf[_seqbufptr+2] = (device);\ - _seqbuf[_seqbufptr+3] = 0;\ - _SEQ_ADVBUF(4);} - -/* - * Patch loading. - */ -#define SEQ_WRPATCH(patchx, len) \ - {if (_seqbufptr) SEQ_DUMPBUF();\ - if (write(seqfd, (char*)(patchx), len)==-1) \ - perror("Write patch: /dev/sequencer");} -#define SEQ_WRPATCH2(patchx, len) \ - (SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len)) - -#endif #endif diff --git a/include/linux/stat.h b/include/linux/stat.h index 46132409a3f7..075cb0c7eb2a 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -1,52 +1,10 @@ #ifndef _LINUX_STAT_H #define _LINUX_STAT_H -#ifdef __KERNEL__ #include +#include -#endif - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) - -#define S_IFMT 00170000 -#define S_IFSOCK 0140000 -#define S_IFLNK 0120000 -#define S_IFREG 0100000 -#define S_IFBLK 0060000 -#define S_IFDIR 0040000 -#define S_IFCHR 0020000 -#define S_IFIFO 0010000 -#define S_ISUID 0004000 -#define S_ISGID 0002000 -#define S_ISVTX 0001000 - -#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) -#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) -#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) -#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) -#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) -#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) -#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) - -#define S_IRWXU 00700 -#define S_IRUSR 00400 -#define S_IWUSR 00200 -#define S_IXUSR 00100 - -#define S_IRWXG 00070 -#define S_IRGRP 00040 -#define S_IWGRP 00020 -#define S_IXGRP 00010 - -#define S_IRWXO 00007 -#define S_IROTH 00004 -#define S_IWOTH 00002 -#define S_IXOTH 00001 - -#endif - -#ifdef __KERNEL__ #define S_IRWXUGO (S_IRWXU|S_IRWXG|S_IRWXO) #define S_IALLUGO (S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO) #define S_IRUGO (S_IRUSR|S_IRGRP|S_IROTH) @@ -77,5 +35,3 @@ struct kstat { }; #endif - -#endif diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 1747b6787b9e..f4aec0e75c3a 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -1,9 +1,8 @@ #ifndef _LINUX_STDDEF_H #define _LINUX_STDDEF_H -#include +#include -#ifdef __KERNEL__ #undef NULL #define NULL ((void *)0) @@ -19,6 +18,4 @@ enum { #else #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) #endif -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/string.h b/include/linux/string.h index b9178812d9df..630125818ca8 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -1,16 +1,12 @@ #ifndef _LINUX_STRING_H_ #define _LINUX_STRING_H_ -/* We don't want strings.h stuff being used by user stuff by accident */ - -#ifndef __KERNEL__ -#include -#else #include /* for inline */ #include /* for size_t */ #include /* for NULL */ #include +#include extern char *strndup_user(const char __user *, long); extern void *memdup_user(const void __user *, size_t); @@ -147,5 +143,4 @@ static inline bool strstarts(const char *str, const char *prefix) extern size_t memweight(const void *ptr, size_t bytes); -#endif /* __KERNEL__ */ #endif /* _LINUX_STRING_H_ */ diff --git a/include/linux/suspend_ioctls.h b/include/linux/suspend_ioctls.h deleted file mode 100644 index 0b30382984fe..000000000000 --- a/include/linux/suspend_ioctls.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _LINUX_SUSPEND_IOCTLS_H -#define _LINUX_SUSPEND_IOCTLS_H - -#include -/* - * This structure is used to pass the values needed for the identification - * of the resume swap area from a user space to the kernel via the - * SNAPSHOT_SET_SWAP_AREA ioctl - */ -struct resume_swap_area { - __kernel_loff_t offset; - __u32 dev; -} __attribute__((packed)); - -#define SNAPSHOT_IOC_MAGIC '3' -#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1) -#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2) -#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4) -#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5) -#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9) -#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11) -#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \ - struct resume_swap_area) -#define SNAPSHOT_GET_IMAGE_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 14, __kernel_loff_t) -#define SNAPSHOT_PLATFORM_SUPPORT _IO(SNAPSHOT_IOC_MAGIC, 15) -#define SNAPSHOT_POWER_OFF _IO(SNAPSHOT_IOC_MAGIC, 16) -#define SNAPSHOT_CREATE_IMAGE _IOW(SNAPSHOT_IOC_MAGIC, 17, int) -#define SNAPSHOT_PREF_IMAGE_SIZE _IO(SNAPSHOT_IOC_MAGIC, 18) -#define SNAPSHOT_AVAIL_SWAP_SIZE _IOR(SNAPSHOT_IOC_MAGIC, 19, __kernel_loff_t) -#define SNAPSHOT_ALLOC_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 20, __kernel_loff_t) -#define SNAPSHOT_IOC_MAXNR 20 - -#endif /* _LINUX_SUSPEND_IOCTLS_H */ diff --git a/include/linux/swab.h b/include/linux/swab.h index ea0c02fd5163..9ad3c60f6cae 100644 --- a/include/linux/swab.h +++ b/include/linux/swab.h @@ -1,284 +1,8 @@ #ifndef _LINUX_SWAB_H #define _LINUX_SWAB_H -#include -#include -#include +#include -/* - * casts are necessary for constants, because we never know how for sure - * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way. - */ -#define ___constant_swab16(x) ((__u16)( \ - (((__u16)(x) & (__u16)0x00ffU) << 8) | \ - (((__u16)(x) & (__u16)0xff00U) >> 8))) - -#define ___constant_swab32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ - (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ - (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ - (((__u32)(x) & (__u32)0xff000000UL) >> 24))) - -#define ___constant_swab64(x) ((__u64)( \ - (((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) | \ - (((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) | \ - (((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) | \ - (((__u64)(x) & (__u64)0x00000000ff000000ULL) << 8) | \ - (((__u64)(x) & (__u64)0x000000ff00000000ULL) >> 8) | \ - (((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) | \ - (((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \ - (((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56))) - -#define ___constant_swahw32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x0000ffffUL) << 16) | \ - (((__u32)(x) & (__u32)0xffff0000UL) >> 16))) - -#define ___constant_swahb32(x) ((__u32)( \ - (((__u32)(x) & (__u32)0x00ff00ffUL) << 8) | \ - (((__u32)(x) & (__u32)0xff00ff00UL) >> 8))) - -/* - * Implement the following as inlines, but define the interface using - * macros to allow constant folding when possible: - * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32 - */ - -static inline __attribute_const__ __u16 __fswab16(__u16 val) -{ -#ifdef __arch_swab16 - return __arch_swab16(val); -#else - return ___constant_swab16(val); -#endif -} - -static inline __attribute_const__ __u32 __fswab32(__u32 val) -{ -#ifdef __arch_swab32 - return __arch_swab32(val); -#else - return ___constant_swab32(val); -#endif -} - -static inline __attribute_const__ __u64 __fswab64(__u64 val) -{ -#ifdef __arch_swab64 - return __arch_swab64(val); -#elif defined(__SWAB_64_THRU_32__) - __u32 h = val >> 32; - __u32 l = val & ((1ULL << 32) - 1); - return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h))); -#else - return ___constant_swab64(val); -#endif -} - -static inline __attribute_const__ __u32 __fswahw32(__u32 val) -{ -#ifdef __arch_swahw32 - return __arch_swahw32(val); -#else - return ___constant_swahw32(val); -#endif -} - -static inline __attribute_const__ __u32 __fswahb32(__u32 val) -{ -#ifdef __arch_swahb32 - return __arch_swahb32(val); -#else - return ___constant_swahb32(val); -#endif -} - -/** - * __swab16 - return a byteswapped 16-bit value - * @x: value to byteswap - */ -#define __swab16(x) \ - (__builtin_constant_p((__u16)(x)) ? \ - ___constant_swab16(x) : \ - __fswab16(x)) - -/** - * __swab32 - return a byteswapped 32-bit value - * @x: value to byteswap - */ -#define __swab32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swab32(x) : \ - __fswab32(x)) - -/** - * __swab64 - return a byteswapped 64-bit value - * @x: value to byteswap - */ -#define __swab64(x) \ - (__builtin_constant_p((__u64)(x)) ? \ - ___constant_swab64(x) : \ - __fswab64(x)) - -/** - * __swahw32 - return a word-swapped 32-bit value - * @x: value to wordswap - * - * __swahw32(0x12340000) is 0x00001234 - */ -#define __swahw32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swahw32(x) : \ - __fswahw32(x)) - -/** - * __swahb32 - return a high and low byte-swapped 32-bit value - * @x: value to byteswap - * - * __swahb32(0x12345678) is 0x34127856 - */ -#define __swahb32(x) \ - (__builtin_constant_p((__u32)(x)) ? \ - ___constant_swahb32(x) : \ - __fswahb32(x)) - -/** - * __swab16p - return a byteswapped 16-bit value from a pointer - * @p: pointer to a naturally-aligned 16-bit value - */ -static inline __u16 __swab16p(const __u16 *p) -{ -#ifdef __arch_swab16p - return __arch_swab16p(p); -#else - return __swab16(*p); -#endif -} - -/** - * __swab32p - return a byteswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - */ -static inline __u32 __swab32p(const __u32 *p) -{ -#ifdef __arch_swab32p - return __arch_swab32p(p); -#else - return __swab32(*p); -#endif -} - -/** - * __swab64p - return a byteswapped 64-bit value from a pointer - * @p: pointer to a naturally-aligned 64-bit value - */ -static inline __u64 __swab64p(const __u64 *p) -{ -#ifdef __arch_swab64p - return __arch_swab64p(p); -#else - return __swab64(*p); -#endif -} - -/** - * __swahw32p - return a wordswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahw32() for details of wordswapping. - */ -static inline __u32 __swahw32p(const __u32 *p) -{ -#ifdef __arch_swahw32p - return __arch_swahw32p(p); -#else - return __swahw32(*p); -#endif -} - -/** - * __swahb32p - return a high and low byteswapped 32-bit value from a pointer - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahb32() for details of high/low byteswapping. - */ -static inline __u32 __swahb32p(const __u32 *p) -{ -#ifdef __arch_swahb32p - return __arch_swahb32p(p); -#else - return __swahb32(*p); -#endif -} - -/** - * __swab16s - byteswap a 16-bit value in-place - * @p: pointer to a naturally-aligned 16-bit value - */ -static inline void __swab16s(__u16 *p) -{ -#ifdef __arch_swab16s - __arch_swab16s(p); -#else - *p = __swab16p(p); -#endif -} -/** - * __swab32s - byteswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - */ -static inline void __swab32s(__u32 *p) -{ -#ifdef __arch_swab32s - __arch_swab32s(p); -#else - *p = __swab32p(p); -#endif -} - -/** - * __swab64s - byteswap a 64-bit value in-place - * @p: pointer to a naturally-aligned 64-bit value - */ -static inline void __swab64s(__u64 *p) -{ -#ifdef __arch_swab64s - __arch_swab64s(p); -#else - *p = __swab64p(p); -#endif -} - -/** - * __swahw32s - wordswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahw32() for details of wordswapping - */ -static inline void __swahw32s(__u32 *p) -{ -#ifdef __arch_swahw32s - __arch_swahw32s(p); -#else - *p = __swahw32p(p); -#endif -} - -/** - * __swahb32s - high and low byteswap a 32-bit value in-place - * @p: pointer to a naturally-aligned 32-bit value - * - * See __swahb32() for details of high and low byte swapping - */ -static inline void __swahb32s(__u32 *p) -{ -#ifdef __arch_swahb32s - __arch_swahb32s(p); -#else - *p = __swahb32p(p); -#endif -} - -#ifdef __KERNEL__ # define swab16 __swab16 # define swab32 __swab32 # define swab64 __swab64 @@ -294,6 +18,4 @@ static inline void __swahb32s(__u32 *p) # define swab64s __swab64s # define swahw32s __swahw32s # define swahb32s __swahb32s -#endif /* __KERNEL__ */ - #endif /* _LINUX_SWAB_H */ diff --git a/include/linux/synclink.h b/include/linux/synclink.h index 2e7d81c4e5ad..f1405b1c71ba 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -8,295 +8,11 @@ * Redistribution of this file is permitted under * the terms of the GNU Public License (GPL) */ - #ifndef _SYNCLINK_H_ #define _SYNCLINK_H_ -#define SYNCLINK_H_VERSION 3.6 - -#include - -#define BIT0 0x0001 -#define BIT1 0x0002 -#define BIT2 0x0004 -#define BIT3 0x0008 -#define BIT4 0x0010 -#define BIT5 0x0020 -#define BIT6 0x0040 -#define BIT7 0x0080 -#define BIT8 0x0100 -#define BIT9 0x0200 -#define BIT10 0x0400 -#define BIT11 0x0800 -#define BIT12 0x1000 -#define BIT13 0x2000 -#define BIT14 0x4000 -#define BIT15 0x8000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - - -#define HDLC_MAX_FRAME_SIZE 65535 -#define MAX_ASYNC_TRANSMIT 4096 -#define MAX_ASYNC_BUFFER_SIZE 4096 - -#define ASYNC_PARITY_NONE 0 -#define ASYNC_PARITY_EVEN 1 -#define ASYNC_PARITY_ODD 2 -#define ASYNC_PARITY_SPACE 3 - -#define HDLC_FLAG_UNDERRUN_ABORT7 0x0000 -#define HDLC_FLAG_UNDERRUN_ABORT15 0x0001 -#define HDLC_FLAG_UNDERRUN_FLAG 0x0002 -#define HDLC_FLAG_UNDERRUN_CRC 0x0004 -#define HDLC_FLAG_SHARE_ZERO 0x0010 -#define HDLC_FLAG_AUTO_CTS 0x0020 -#define HDLC_FLAG_AUTO_DCD 0x0040 -#define HDLC_FLAG_AUTO_RTS 0x0080 -#define HDLC_FLAG_RXC_DPLL 0x0100 -#define HDLC_FLAG_RXC_BRG 0x0200 -#define HDLC_FLAG_RXC_TXCPIN 0x8000 -#define HDLC_FLAG_RXC_RXCPIN 0x0000 -#define HDLC_FLAG_TXC_DPLL 0x0400 -#define HDLC_FLAG_TXC_BRG 0x0800 -#define HDLC_FLAG_TXC_TXCPIN 0x0000 -#define HDLC_FLAG_TXC_RXCPIN 0x0008 -#define HDLC_FLAG_DPLL_DIV8 0x1000 -#define HDLC_FLAG_DPLL_DIV16 0x2000 -#define HDLC_FLAG_DPLL_DIV32 0x0000 -#define HDLC_FLAG_HDLC_LOOPMODE 0x4000 - -#define HDLC_CRC_NONE 0 -#define HDLC_CRC_16_CCITT 1 -#define HDLC_CRC_32_CCITT 2 -#define HDLC_CRC_MASK 0x00ff -#define HDLC_CRC_RETURN_EX 0x8000 - -#define RX_OK 0 -#define RX_CRC_ERROR 1 - -#define HDLC_TXIDLE_FLAGS 0 -#define HDLC_TXIDLE_ALT_ZEROS_ONES 1 -#define HDLC_TXIDLE_ZEROS 2 -#define HDLC_TXIDLE_ONES 3 -#define HDLC_TXIDLE_ALT_MARK_SPACE 4 -#define HDLC_TXIDLE_SPACE 5 -#define HDLC_TXIDLE_MARK 6 -#define HDLC_TXIDLE_CUSTOM_8 0x10000000 -#define HDLC_TXIDLE_CUSTOM_16 0x20000000 - -#define HDLC_ENCODING_NRZ 0 -#define HDLC_ENCODING_NRZB 1 -#define HDLC_ENCODING_NRZI_MARK 2 -#define HDLC_ENCODING_NRZI_SPACE 3 -#define HDLC_ENCODING_NRZI HDLC_ENCODING_NRZI_SPACE -#define HDLC_ENCODING_BIPHASE_MARK 4 -#define HDLC_ENCODING_BIPHASE_SPACE 5 -#define HDLC_ENCODING_BIPHASE_LEVEL 6 -#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL 7 - -#define HDLC_PREAMBLE_LENGTH_8BITS 0 -#define HDLC_PREAMBLE_LENGTH_16BITS 1 -#define HDLC_PREAMBLE_LENGTH_32BITS 2 -#define HDLC_PREAMBLE_LENGTH_64BITS 3 - -#define HDLC_PREAMBLE_PATTERN_NONE 0 -#define HDLC_PREAMBLE_PATTERN_ZEROS 1 -#define HDLC_PREAMBLE_PATTERN_FLAGS 2 -#define HDLC_PREAMBLE_PATTERN_10 3 -#define HDLC_PREAMBLE_PATTERN_01 4 -#define HDLC_PREAMBLE_PATTERN_ONES 5 - -#define MGSL_MODE_ASYNC 1 -#define MGSL_MODE_HDLC 2 -#define MGSL_MODE_MONOSYNC 3 -#define MGSL_MODE_BISYNC 4 -#define MGSL_MODE_RAW 6 -#define MGSL_MODE_BASE_CLOCK 7 -#define MGSL_MODE_XSYNC 8 - -#define MGSL_BUS_TYPE_ISA 1 -#define MGSL_BUS_TYPE_EISA 2 -#define MGSL_BUS_TYPE_PCI 5 - -#define MGSL_INTERFACE_MASK 0xf -#define MGSL_INTERFACE_DISABLE 0 -#define MGSL_INTERFACE_RS232 1 -#define MGSL_INTERFACE_V35 2 -#define MGSL_INTERFACE_RS422 3 -#define MGSL_INTERFACE_RTS_EN 0x10 -#define MGSL_INTERFACE_LL 0x20 -#define MGSL_INTERFACE_RL 0x40 -#define MGSL_INTERFACE_MSB_FIRST 0x80 - -typedef struct _MGSL_PARAMS -{ - /* Common */ - - unsigned long mode; /* Asynchronous or HDLC */ - unsigned char loopback; /* internal loopback mode */ - - /* HDLC Only */ - - unsigned short flags; - unsigned char encoding; /* NRZ, NRZI, etc. */ - unsigned long clock_speed; /* external clock speed in bits per second */ - unsigned char addr_filter; /* receive HDLC address filter, 0xFF = disable */ - unsigned short crc_type; /* None, CRC16-CCITT, or CRC32-CCITT */ - unsigned char preamble_length; - unsigned char preamble; - /* Async Only */ +#include - unsigned long data_rate; /* bits per second */ - unsigned char data_bits; /* 7 or 8 data bits */ - unsigned char stop_bits; /* 1 or 2 stop bits */ - unsigned char parity; /* none, even, or odd */ - -} MGSL_PARAMS, *PMGSL_PARAMS; - -#define MICROGATE_VENDOR_ID 0x13c0 -#define SYNCLINK_DEVICE_ID 0x0010 -#define MGSCC_DEVICE_ID 0x0020 -#define SYNCLINK_SCA_DEVICE_ID 0x0030 -#define SYNCLINK_GT_DEVICE_ID 0x0070 -#define SYNCLINK_GT4_DEVICE_ID 0x0080 -#define SYNCLINK_AC_DEVICE_ID 0x0090 -#define SYNCLINK_GT2_DEVICE_ID 0x00A0 -#define MGSL_MAX_SERIAL_NUMBER 30 - -/* -** device diagnostics status -*/ - -#define DiagStatus_OK 0 -#define DiagStatus_AddressFailure 1 -#define DiagStatus_AddressConflict 2 -#define DiagStatus_IrqFailure 3 -#define DiagStatus_IrqConflict 4 -#define DiagStatus_DmaFailure 5 -#define DiagStatus_DmaConflict 6 -#define DiagStatus_PciAdapterNotFound 7 -#define DiagStatus_CantAssignPciResources 8 -#define DiagStatus_CantAssignPciMemAddr 9 -#define DiagStatus_CantAssignPciIoAddr 10 -#define DiagStatus_CantAssignPciIrq 11 -#define DiagStatus_MemoryError 12 - -#define SerialSignal_DCD 0x01 /* Data Carrier Detect */ -#define SerialSignal_TXD 0x02 /* Transmit Data */ -#define SerialSignal_RI 0x04 /* Ring Indicator */ -#define SerialSignal_RXD 0x08 /* Receive Data */ -#define SerialSignal_CTS 0x10 /* Clear to Send */ -#define SerialSignal_RTS 0x20 /* Request to Send */ -#define SerialSignal_DSR 0x40 /* Data Set Ready */ -#define SerialSignal_DTR 0x80 /* Data Terminal Ready */ - - -/* - * Counters of the input lines (CTS, DSR, RI, CD) interrupts - */ -struct mgsl_icount { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; - __u32 txok; - __u32 txunder; - __u32 txabort; - __u32 txtimeout; - __u32 rxshort; - __u32 rxlong; - __u32 rxabort; - __u32 rxover; - __u32 rxcrc; - __u32 rxok; - __u32 exithunt; - __u32 rxidle; -}; - -struct gpio_desc { - __u32 state; - __u32 smask; - __u32 dir; - __u32 dmask; -}; - -#define DEBUG_LEVEL_DATA 1 -#define DEBUG_LEVEL_ERROR 2 -#define DEBUG_LEVEL_INFO 3 -#define DEBUG_LEVEL_BH 4 -#define DEBUG_LEVEL_ISR 5 - -/* -** Event bit flags for use with MgslWaitEvent -*/ - -#define MgslEvent_DsrActive 0x0001 -#define MgslEvent_DsrInactive 0x0002 -#define MgslEvent_Dsr 0x0003 -#define MgslEvent_CtsActive 0x0004 -#define MgslEvent_CtsInactive 0x0008 -#define MgslEvent_Cts 0x000c -#define MgslEvent_DcdActive 0x0010 -#define MgslEvent_DcdInactive 0x0020 -#define MgslEvent_Dcd 0x0030 -#define MgslEvent_RiActive 0x0040 -#define MgslEvent_RiInactive 0x0080 -#define MgslEvent_Ri 0x00c0 -#define MgslEvent_ExitHuntMode 0x0100 -#define MgslEvent_IdleReceived 0x0200 - -/* Private IOCTL codes: - * - * MGSL_IOCSPARAMS set MGSL_PARAMS structure values - * MGSL_IOCGPARAMS get current MGSL_PARAMS structure values - * MGSL_IOCSTXIDLE set current transmit idle mode - * MGSL_IOCGTXIDLE get current transmit idle mode - * MGSL_IOCTXENABLE enable or disable transmitter - * MGSL_IOCRXENABLE enable or disable receiver - * MGSL_IOCTXABORT abort transmitting frame (HDLC) - * MGSL_IOCGSTATS return current statistics - * MGSL_IOCWAITEVENT wait for specified event to occur - * MGSL_LOOPTXDONE transmit in HDLC LoopMode done - * MGSL_IOCSIF set the serial interface type - * MGSL_IOCGIF get the serial interface type - */ -#define MGSL_MAGIC_IOC 'm' -#define MGSL_IOCSPARAMS _IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS) -#define MGSL_IOCGPARAMS _IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS) -#define MGSL_IOCSTXIDLE _IO(MGSL_MAGIC_IOC,2) -#define MGSL_IOCGTXIDLE _IO(MGSL_MAGIC_IOC,3) -#define MGSL_IOCTXENABLE _IO(MGSL_MAGIC_IOC,4) -#define MGSL_IOCRXENABLE _IO(MGSL_MAGIC_IOC,5) -#define MGSL_IOCTXABORT _IO(MGSL_MAGIC_IOC,6) -#define MGSL_IOCGSTATS _IO(MGSL_MAGIC_IOC,7) -#define MGSL_IOCWAITEVENT _IOWR(MGSL_MAGIC_IOC,8,int) -#define MGSL_IOCCLRMODCOUNT _IO(MGSL_MAGIC_IOC,15) -#define MGSL_IOCLOOPTXDONE _IO(MGSL_MAGIC_IOC,9) -#define MGSL_IOCSIF _IO(MGSL_MAGIC_IOC,10) -#define MGSL_IOCGIF _IO(MGSL_MAGIC_IOC,11) -#define MGSL_IOCSGPIO _IOW(MGSL_MAGIC_IOC,16,struct gpio_desc) -#define MGSL_IOCGGPIO _IOR(MGSL_MAGIC_IOC,17,struct gpio_desc) -#define MGSL_IOCWAITGPIO _IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc) -#define MGSL_IOCSXSYNC _IO(MGSL_MAGIC_IOC, 19) -#define MGSL_IOCGXSYNC _IO(MGSL_MAGIC_IOC, 20) -#define MGSL_IOCSXCTRL _IO(MGSL_MAGIC_IOC, 21) -#define MGSL_IOCGXCTRL _IO(MGSL_MAGIC_IOC, 22) - -#ifdef __KERNEL__ /* provide 32 bit ioctl compatibility on 64 bit systems */ #ifdef CONFIG_COMPAT #include @@ -318,6 +34,4 @@ struct MGSL_PARAMS32 { #define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32) #define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32) #endif -#endif - #endif /* _SYNCLINK_H_ */ diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index c34b4c82b0dc..cd844a6a8d5f 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -18,921 +18,14 @@ **************************************************************** **************************************************************** */ - #ifndef _LINUX_SYSCTL_H #define _LINUX_SYSCTL_H -#include -#include -#include - -struct completion; - -#define CTL_MAXNAME 10 /* how many path components do we allow in a - call to sysctl? In other words, what is - the largest acceptable value for the nlen - member of a struct __sysctl_args to have? */ - -struct __sysctl_args { - int __user *name; - int nlen; - void __user *oldval; - size_t __user *oldlenp; - void __user *newval; - size_t newlen; - unsigned long __unused[4]; -}; - -/* Define sysctl names first */ - -/* Top-level names: */ - -enum -{ - CTL_KERN=1, /* General kernel info and control */ - CTL_VM=2, /* VM management */ - CTL_NET=3, /* Networking */ - CTL_PROC=4, /* removal breaks strace(1) compilation */ - CTL_FS=5, /* Filesystems */ - CTL_DEBUG=6, /* Debugging */ - CTL_DEV=7, /* Devices */ - CTL_BUS=8, /* Busses */ - CTL_ABI=9, /* Binary emulation */ - CTL_CPU=10, /* CPU stuff (speed scaling, etc) */ - CTL_ARLAN=254, /* arlan wireless driver */ - CTL_S390DBF=5677, /* s390 debug */ - CTL_SUNRPC=7249, /* sunrpc debug */ - CTL_PM=9899, /* frv power management */ - CTL_FRV=9898, /* frv specific sysctls */ -}; - -/* CTL_BUS names: */ -enum -{ - CTL_BUS_ISA=1 /* ISA */ -}; - -/* /proc/sys/fs/inotify/ */ -enum -{ - INOTIFY_MAX_USER_INSTANCES=1, /* max instances per user */ - INOTIFY_MAX_USER_WATCHES=2, /* max watches per user */ - INOTIFY_MAX_QUEUED_EVENTS=3 /* max queued events per instance */ -}; - -/* CTL_KERN names: */ -enum -{ - KERN_OSTYPE=1, /* string: system version */ - KERN_OSRELEASE=2, /* string: system release */ - KERN_OSREV=3, /* int: system revision */ - KERN_VERSION=4, /* string: compile time info */ - KERN_SECUREMASK=5, /* struct: maximum rights mask */ - KERN_PROF=6, /* table: profiling information */ - KERN_NODENAME=7, /* string: hostname */ - KERN_DOMAINNAME=8, /* string: domainname */ - - KERN_PANIC=15, /* int: panic timeout */ - KERN_REALROOTDEV=16, /* real root device to mount after initrd */ - - KERN_SPARC_REBOOT=21, /* reboot command on Sparc */ - KERN_CTLALTDEL=22, /* int: allow ctl-alt-del to reboot */ - KERN_PRINTK=23, /* struct: control printk logging parameters */ - KERN_NAMETRANS=24, /* Name translation */ - KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */ - KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */ - KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */ - KERN_MODPROBE=28, /* string: modprobe path */ - KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */ - KERN_ACCT=30, /* BSD process accounting parameters */ - KERN_PPC_L2CR=31, /* l2cr register on PPC */ - - KERN_RTSIGNR=32, /* Number of rt sigs queued */ - KERN_RTSIGMAX=33, /* Max queuable */ - - KERN_SHMMAX=34, /* long: Maximum shared memory segment */ - KERN_MSGMAX=35, /* int: Maximum size of a messege */ - KERN_MSGMNB=36, /* int: Maximum message queue size */ - KERN_MSGPOOL=37, /* int: Maximum system message pool size */ - KERN_SYSRQ=38, /* int: Sysreq enable */ - KERN_MAX_THREADS=39, /* int: Maximum nr of threads in the system */ - KERN_RANDOM=40, /* Random driver */ - KERN_SHMALL=41, /* int: Maximum size of shared memory */ - KERN_MSGMNI=42, /* int: msg queue identifiers */ - KERN_SEM=43, /* struct: sysv semaphore limits */ - KERN_SPARC_STOP_A=44, /* int: Sparc Stop-A enable */ - KERN_SHMMNI=45, /* int: shm array identifiers */ - KERN_OVERFLOWUID=46, /* int: overflow UID */ - KERN_OVERFLOWGID=47, /* int: overflow GID */ - KERN_SHMPATH=48, /* string: path to shm fs */ - KERN_HOTPLUG=49, /* string: path to uevent helper (deprecated) */ - KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */ - KERN_S390_USER_DEBUG_LOGGING=51, /* int: dumps of user faults */ - KERN_CORE_USES_PID=52, /* int: use core or core.%pid */ - KERN_TAINTED=53, /* int: various kernel tainted flags */ - KERN_CADPID=54, /* int: PID of the process to notify on CAD */ - KERN_PIDMAX=55, /* int: PID # limit */ - KERN_CORE_PATTERN=56, /* string: pattern for core-file names */ - KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */ - KERN_HPPA_PWRSW=58, /* int: hppa soft-power enable */ - KERN_HPPA_UNALIGNED=59, /* int: hppa unaligned-trap enable */ - KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */ - KERN_PRINTK_RATELIMIT_BURST=61, /* int: tune printk ratelimiting */ - KERN_PTY=62, /* dir: pty driver */ - KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */ - KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */ - KERN_HZ_TIMER=65, /* int: hz timer on or off */ - KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */ - KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */ - KERN_RANDOMIZE=68, /* int: randomize virtual address space */ - KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */ - KERN_SPIN_RETRY=70, /* int: number of spinlock retries */ - KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */ - KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */ - KERN_COMPAT_LOG=73, /* int: print compat layer messages */ - KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */ - KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */ - KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */ -}; - - - -/* CTL_VM names: */ -enum -{ - VM_UNUSED1=1, /* was: struct: Set vm swapping control */ - VM_UNUSED2=2, /* was; int: Linear or sqrt() swapout for hogs */ - VM_UNUSED3=3, /* was: struct: Set free page thresholds */ - VM_UNUSED4=4, /* Spare */ - VM_OVERCOMMIT_MEMORY=5, /* Turn off the virtual memory safety limit */ - VM_UNUSED5=6, /* was: struct: Set buffer memory thresholds */ - VM_UNUSED7=7, /* was: struct: Set cache memory thresholds */ - VM_UNUSED8=8, /* was: struct: Control kswapd behaviour */ - VM_UNUSED9=9, /* was: struct: Set page table cache parameters */ - VM_PAGE_CLUSTER=10, /* int: set number of pages to swap together */ - VM_DIRTY_BACKGROUND=11, /* dirty_background_ratio */ - VM_DIRTY_RATIO=12, /* dirty_ratio */ - VM_DIRTY_WB_CS=13, /* dirty_writeback_centisecs */ - VM_DIRTY_EXPIRE_CS=14, /* dirty_expire_centisecs */ - VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */ - VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */ - VM_PAGEBUF=17, /* struct: Control pagebuf parameters */ - VM_HUGETLB_PAGES=18, /* int: Number of available Huge Pages */ - VM_SWAPPINESS=19, /* Tendency to steal mapped memory */ - VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */ - VM_MIN_FREE_KBYTES=21, /* Minimum free kilobytes to maintain */ - VM_MAX_MAP_COUNT=22, /* int: Maximum number of mmaps/address-space */ - VM_LAPTOP_MODE=23, /* vm laptop mode */ - VM_BLOCK_DUMP=24, /* block dump mode */ - VM_HUGETLB_GROUP=25, /* permitted hugetlb group */ - VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */ - VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */ - VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */ - VM_DROP_PAGECACHE=29, /* int: nuke lots of pagecache */ - VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */ - VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */ - VM_MIN_UNMAPPED=32, /* Set min percent of unmapped pages */ - VM_PANIC_ON_OOM=33, /* panic at out-of-memory */ - VM_VDSO_ENABLED=34, /* map VDSO into new processes? */ - VM_MIN_SLAB=35, /* Percent pages ignored by zone reclaim */ -}; - - -/* CTL_NET names: */ -enum -{ - NET_CORE=1, - NET_ETHER=2, - NET_802=3, - NET_UNIX=4, - NET_IPV4=5, - NET_IPX=6, - NET_ATALK=7, - NET_NETROM=8, - NET_AX25=9, - NET_BRIDGE=10, - NET_ROSE=11, - NET_IPV6=12, - NET_X25=13, - NET_TR=14, - NET_DECNET=15, - NET_ECONET=16, - NET_SCTP=17, - NET_LLC=18, - NET_NETFILTER=19, - NET_DCCP=20, - NET_IRDA=412, -}; - -/* /proc/sys/kernel/random */ -enum -{ - RANDOM_POOLSIZE=1, - RANDOM_ENTROPY_COUNT=2, - RANDOM_READ_THRESH=3, - RANDOM_WRITE_THRESH=4, - RANDOM_BOOT_ID=5, - RANDOM_UUID=6 -}; - -/* /proc/sys/kernel/pty */ -enum -{ - PTY_MAX=1, - PTY_NR=2 -}; - -/* /proc/sys/bus/isa */ -enum -{ - BUS_ISA_MEM_BASE=1, - BUS_ISA_PORT_BASE=2, - BUS_ISA_PORT_SHIFT=3 -}; - -/* /proc/sys/net/core */ -enum -{ - NET_CORE_WMEM_MAX=1, - NET_CORE_RMEM_MAX=2, - NET_CORE_WMEM_DEFAULT=3, - NET_CORE_RMEM_DEFAULT=4, -/* was NET_CORE_DESTROY_DELAY */ - NET_CORE_MAX_BACKLOG=6, - NET_CORE_FASTROUTE=7, - NET_CORE_MSG_COST=8, - NET_CORE_MSG_BURST=9, - NET_CORE_OPTMEM_MAX=10, - NET_CORE_HOT_LIST_LENGTH=11, - NET_CORE_DIVERT_VERSION=12, - NET_CORE_NO_CONG_THRESH=13, - NET_CORE_NO_CONG=14, - NET_CORE_LO_CONG=15, - NET_CORE_MOD_CONG=16, - NET_CORE_DEV_WEIGHT=17, - NET_CORE_SOMAXCONN=18, - NET_CORE_BUDGET=19, - NET_CORE_AEVENT_ETIME=20, - NET_CORE_AEVENT_RSEQTH=21, - NET_CORE_WARNINGS=22, -}; - -/* /proc/sys/net/ethernet */ - -/* /proc/sys/net/802 */ - -/* /proc/sys/net/unix */ - -enum -{ - NET_UNIX_DESTROY_DELAY=1, - NET_UNIX_DELETE_DELAY=2, - NET_UNIX_MAX_DGRAM_QLEN=3, -}; - -/* /proc/sys/net/netfilter */ -enum -{ - NET_NF_CONNTRACK_MAX=1, - NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, - NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, - NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, - NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, - NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, - NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, - NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, - NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, - NET_NF_CONNTRACK_UDP_TIMEOUT=10, - NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, - NET_NF_CONNTRACK_ICMP_TIMEOUT=12, - NET_NF_CONNTRACK_GENERIC_TIMEOUT=13, - NET_NF_CONNTRACK_BUCKETS=14, - NET_NF_CONNTRACK_LOG_INVALID=15, - NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, - NET_NF_CONNTRACK_TCP_LOOSE=17, - NET_NF_CONNTRACK_TCP_BE_LIBERAL=18, - NET_NF_CONNTRACK_TCP_MAX_RETRANS=19, - NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, - NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, - NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, - NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, - NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, - NET_NF_CONNTRACK_COUNT=27, - NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28, - NET_NF_CONNTRACK_FRAG6_TIMEOUT=29, - NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30, - NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31, - NET_NF_CONNTRACK_CHECKSUM=32, -}; - -/* /proc/sys/net/ipv4 */ -enum -{ - /* v2.0 compatibile variables */ - NET_IPV4_FORWARD=8, - NET_IPV4_DYNADDR=9, - - NET_IPV4_CONF=16, - NET_IPV4_NEIGH=17, - NET_IPV4_ROUTE=18, - NET_IPV4_FIB_HASH=19, - NET_IPV4_NETFILTER=20, - - NET_IPV4_TCP_TIMESTAMPS=33, - NET_IPV4_TCP_WINDOW_SCALING=34, - NET_IPV4_TCP_SACK=35, - NET_IPV4_TCP_RETRANS_COLLAPSE=36, - NET_IPV4_DEFAULT_TTL=37, - NET_IPV4_AUTOCONFIG=38, - NET_IPV4_NO_PMTU_DISC=39, - NET_IPV4_TCP_SYN_RETRIES=40, - NET_IPV4_IPFRAG_HIGH_THRESH=41, - NET_IPV4_IPFRAG_LOW_THRESH=42, - NET_IPV4_IPFRAG_TIME=43, - NET_IPV4_TCP_MAX_KA_PROBES=44, - NET_IPV4_TCP_KEEPALIVE_TIME=45, - NET_IPV4_TCP_KEEPALIVE_PROBES=46, - NET_IPV4_TCP_RETRIES1=47, - NET_IPV4_TCP_RETRIES2=48, - NET_IPV4_TCP_FIN_TIMEOUT=49, - NET_IPV4_IP_MASQ_DEBUG=50, - NET_TCP_SYNCOOKIES=51, - NET_TCP_STDURG=52, - NET_TCP_RFC1337=53, - NET_TCP_SYN_TAILDROP=54, - NET_TCP_MAX_SYN_BACKLOG=55, - NET_IPV4_LOCAL_PORT_RANGE=56, - NET_IPV4_ICMP_ECHO_IGNORE_ALL=57, - NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58, - NET_IPV4_ICMP_SOURCEQUENCH_RATE=59, - NET_IPV4_ICMP_DESTUNREACH_RATE=60, - NET_IPV4_ICMP_TIMEEXCEED_RATE=61, - NET_IPV4_ICMP_PARAMPROB_RATE=62, - NET_IPV4_ICMP_ECHOREPLY_RATE=63, - NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64, - NET_IPV4_IGMP_MAX_MEMBERSHIPS=65, - NET_TCP_TW_RECYCLE=66, - NET_IPV4_ALWAYS_DEFRAG=67, - NET_IPV4_TCP_KEEPALIVE_INTVL=68, - NET_IPV4_INET_PEER_THRESHOLD=69, - NET_IPV4_INET_PEER_MINTTL=70, - NET_IPV4_INET_PEER_MAXTTL=71, - NET_IPV4_INET_PEER_GC_MINTIME=72, - NET_IPV4_INET_PEER_GC_MAXTIME=73, - NET_TCP_ORPHAN_RETRIES=74, - NET_TCP_ABORT_ON_OVERFLOW=75, - NET_TCP_SYNACK_RETRIES=76, - NET_TCP_MAX_ORPHANS=77, - NET_TCP_MAX_TW_BUCKETS=78, - NET_TCP_FACK=79, - NET_TCP_REORDERING=80, - NET_TCP_ECN=81, - NET_TCP_DSACK=82, - NET_TCP_MEM=83, - NET_TCP_WMEM=84, - NET_TCP_RMEM=85, - NET_TCP_APP_WIN=86, - NET_TCP_ADV_WIN_SCALE=87, - NET_IPV4_NONLOCAL_BIND=88, - NET_IPV4_ICMP_RATELIMIT=89, - NET_IPV4_ICMP_RATEMASK=90, - NET_TCP_TW_REUSE=91, - NET_TCP_FRTO=92, - NET_TCP_LOW_LATENCY=93, - NET_IPV4_IPFRAG_SECRET_INTERVAL=94, - NET_IPV4_IGMP_MAX_MSF=96, - NET_TCP_NO_METRICS_SAVE=97, - NET_TCP_DEFAULT_WIN_SCALE=105, - NET_TCP_MODERATE_RCVBUF=106, - NET_TCP_TSO_WIN_DIVISOR=107, - NET_TCP_BIC_BETA=108, - NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109, - NET_TCP_CONG_CONTROL=110, - NET_TCP_ABC=111, - NET_IPV4_IPFRAG_MAX_DIST=112, - NET_TCP_MTU_PROBING=113, - NET_TCP_BASE_MSS=114, - NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115, - NET_TCP_DMA_COPYBREAK=116, - NET_TCP_SLOW_START_AFTER_IDLE=117, - NET_CIPSOV4_CACHE_ENABLE=118, - NET_CIPSOV4_CACHE_BUCKET_SIZE=119, - NET_CIPSOV4_RBM_OPTFMT=120, - NET_CIPSOV4_RBM_STRICTVALID=121, - NET_TCP_AVAIL_CONG_CONTROL=122, - NET_TCP_ALLOWED_CONG_CONTROL=123, - NET_TCP_MAX_SSTHRESH=124, - NET_TCP_FRTO_RESPONSE=125, -}; - -enum { - NET_IPV4_ROUTE_FLUSH=1, - NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */ - NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */ - NET_IPV4_ROUTE_GC_THRESH=4, - NET_IPV4_ROUTE_MAX_SIZE=5, - NET_IPV4_ROUTE_GC_MIN_INTERVAL=6, - NET_IPV4_ROUTE_GC_TIMEOUT=7, - NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */ - NET_IPV4_ROUTE_REDIRECT_LOAD=9, - NET_IPV4_ROUTE_REDIRECT_NUMBER=10, - NET_IPV4_ROUTE_REDIRECT_SILENCE=11, - NET_IPV4_ROUTE_ERROR_COST=12, - NET_IPV4_ROUTE_ERROR_BURST=13, - NET_IPV4_ROUTE_GC_ELASTICITY=14, - NET_IPV4_ROUTE_MTU_EXPIRES=15, - NET_IPV4_ROUTE_MIN_PMTU=16, - NET_IPV4_ROUTE_MIN_ADVMSS=17, - NET_IPV4_ROUTE_SECRET_INTERVAL=18, - NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19, -}; - -enum -{ - NET_PROTO_CONF_ALL=-2, - NET_PROTO_CONF_DEFAULT=-3 - - /* And device ifindices ... */ -}; - -enum -{ - NET_IPV4_CONF_FORWARDING=1, - NET_IPV4_CONF_MC_FORWARDING=2, - NET_IPV4_CONF_PROXY_ARP=3, - NET_IPV4_CONF_ACCEPT_REDIRECTS=4, - NET_IPV4_CONF_SECURE_REDIRECTS=5, - NET_IPV4_CONF_SEND_REDIRECTS=6, - NET_IPV4_CONF_SHARED_MEDIA=7, - NET_IPV4_CONF_RP_FILTER=8, - NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9, - NET_IPV4_CONF_BOOTP_RELAY=10, - NET_IPV4_CONF_LOG_MARTIANS=11, - NET_IPV4_CONF_TAG=12, - NET_IPV4_CONF_ARPFILTER=13, - NET_IPV4_CONF_MEDIUM_ID=14, - NET_IPV4_CONF_NOXFRM=15, - NET_IPV4_CONF_NOPOLICY=16, - NET_IPV4_CONF_FORCE_IGMP_VERSION=17, - NET_IPV4_CONF_ARP_ANNOUNCE=18, - NET_IPV4_CONF_ARP_IGNORE=19, - NET_IPV4_CONF_PROMOTE_SECONDARIES=20, - NET_IPV4_CONF_ARP_ACCEPT=21, - NET_IPV4_CONF_ARP_NOTIFY=22, -}; - -/* /proc/sys/net/ipv4/netfilter */ -enum -{ - NET_IPV4_NF_CONNTRACK_MAX=1, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9, - NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10, - NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11, - NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12, - NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13, - NET_IPV4_NF_CONNTRACK_BUCKETS=14, - NET_IPV4_NF_CONNTRACK_LOG_INVALID=15, - NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16, - NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17, - NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18, - NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25, - NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26, - NET_IPV4_NF_CONNTRACK_COUNT=27, - NET_IPV4_NF_CONNTRACK_CHECKSUM=28, -}; - -/* /proc/sys/net/ipv6 */ -enum { - NET_IPV6_CONF=16, - NET_IPV6_NEIGH=17, - NET_IPV6_ROUTE=18, - NET_IPV6_ICMP=19, - NET_IPV6_BINDV6ONLY=20, - NET_IPV6_IP6FRAG_HIGH_THRESH=21, - NET_IPV6_IP6FRAG_LOW_THRESH=22, - NET_IPV6_IP6FRAG_TIME=23, - NET_IPV6_IP6FRAG_SECRET_INTERVAL=24, - NET_IPV6_MLD_MAX_MSF=25, -}; - -enum { - NET_IPV6_ROUTE_FLUSH=1, - NET_IPV6_ROUTE_GC_THRESH=2, - NET_IPV6_ROUTE_MAX_SIZE=3, - NET_IPV6_ROUTE_GC_MIN_INTERVAL=4, - NET_IPV6_ROUTE_GC_TIMEOUT=5, - NET_IPV6_ROUTE_GC_INTERVAL=6, - NET_IPV6_ROUTE_GC_ELASTICITY=7, - NET_IPV6_ROUTE_MTU_EXPIRES=8, - NET_IPV6_ROUTE_MIN_ADVMSS=9, - NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10 -}; - -enum { - NET_IPV6_FORWARDING=1, - NET_IPV6_HOP_LIMIT=2, - NET_IPV6_MTU=3, - NET_IPV6_ACCEPT_RA=4, - NET_IPV6_ACCEPT_REDIRECTS=5, - NET_IPV6_AUTOCONF=6, - NET_IPV6_DAD_TRANSMITS=7, - NET_IPV6_RTR_SOLICITS=8, - NET_IPV6_RTR_SOLICIT_INTERVAL=9, - NET_IPV6_RTR_SOLICIT_DELAY=10, - NET_IPV6_USE_TEMPADDR=11, - NET_IPV6_TEMP_VALID_LFT=12, - NET_IPV6_TEMP_PREFERED_LFT=13, - NET_IPV6_REGEN_MAX_RETRY=14, - NET_IPV6_MAX_DESYNC_FACTOR=15, - NET_IPV6_MAX_ADDRESSES=16, - NET_IPV6_FORCE_MLD_VERSION=17, - NET_IPV6_ACCEPT_RA_DEFRTR=18, - NET_IPV6_ACCEPT_RA_PINFO=19, - NET_IPV6_ACCEPT_RA_RTR_PREF=20, - NET_IPV6_RTR_PROBE_INTERVAL=21, - NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22, - NET_IPV6_PROXY_NDP=23, - NET_IPV6_ACCEPT_SOURCE_ROUTE=25, - __NET_IPV6_MAX -}; - -/* /proc/sys/net/ipv6/icmp */ -enum { - NET_IPV6_ICMP_RATELIMIT=1 -}; - -/* /proc/sys/net//neigh/ */ -enum { - NET_NEIGH_MCAST_SOLICIT=1, - NET_NEIGH_UCAST_SOLICIT=2, - NET_NEIGH_APP_SOLICIT=3, - NET_NEIGH_RETRANS_TIME=4, - NET_NEIGH_REACHABLE_TIME=5, - NET_NEIGH_DELAY_PROBE_TIME=6, - NET_NEIGH_GC_STALE_TIME=7, - NET_NEIGH_UNRES_QLEN=8, - NET_NEIGH_PROXY_QLEN=9, - NET_NEIGH_ANYCAST_DELAY=10, - NET_NEIGH_PROXY_DELAY=11, - NET_NEIGH_LOCKTIME=12, - NET_NEIGH_GC_INTERVAL=13, - NET_NEIGH_GC_THRESH1=14, - NET_NEIGH_GC_THRESH2=15, - NET_NEIGH_GC_THRESH3=16, - NET_NEIGH_RETRANS_TIME_MS=17, - NET_NEIGH_REACHABLE_TIME_MS=18, -}; - -/* /proc/sys/net/dccp */ -enum { - NET_DCCP_DEFAULT=1, -}; - -/* /proc/sys/net/ipx */ -enum { - NET_IPX_PPROP_BROADCASTING=1, - NET_IPX_FORWARDING=2 -}; - -/* /proc/sys/net/llc */ -enum { - NET_LLC2=1, - NET_LLC_STATION=2, -}; - -/* /proc/sys/net/llc/llc2 */ -enum { - NET_LLC2_TIMEOUT=1, -}; - -/* /proc/sys/net/llc/station */ -enum { - NET_LLC_STATION_ACK_TIMEOUT=1, -}; - -/* /proc/sys/net/llc/llc2/timeout */ -enum { - NET_LLC2_ACK_TIMEOUT=1, - NET_LLC2_P_TIMEOUT=2, - NET_LLC2_REJ_TIMEOUT=3, - NET_LLC2_BUSY_TIMEOUT=4, -}; - -/* /proc/sys/net/appletalk */ -enum { - NET_ATALK_AARP_EXPIRY_TIME=1, - NET_ATALK_AARP_TICK_TIME=2, - NET_ATALK_AARP_RETRANSMIT_LIMIT=3, - NET_ATALK_AARP_RESOLVE_TIME=4 -}; - - -/* /proc/sys/net/netrom */ -enum { - NET_NETROM_DEFAULT_PATH_QUALITY=1, - NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2, - NET_NETROM_NETWORK_TTL_INITIALISER=3, - NET_NETROM_TRANSPORT_TIMEOUT=4, - NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5, - NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6, - NET_NETROM_TRANSPORT_BUSY_DELAY=7, - NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8, - NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9, - NET_NETROM_ROUTING_CONTROL=10, - NET_NETROM_LINK_FAILS_COUNT=11, - NET_NETROM_RESET=12 -}; - -/* /proc/sys/net/ax25 */ -enum { - NET_AX25_IP_DEFAULT_MODE=1, - NET_AX25_DEFAULT_MODE=2, - NET_AX25_BACKOFF_TYPE=3, - NET_AX25_CONNECT_MODE=4, - NET_AX25_STANDARD_WINDOW=5, - NET_AX25_EXTENDED_WINDOW=6, - NET_AX25_T1_TIMEOUT=7, - NET_AX25_T2_TIMEOUT=8, - NET_AX25_T3_TIMEOUT=9, - NET_AX25_IDLE_TIMEOUT=10, - NET_AX25_N2=11, - NET_AX25_PACLEN=12, - NET_AX25_PROTOCOL=13, - NET_AX25_DAMA_SLAVE_TIMEOUT=14 -}; - -/* /proc/sys/net/rose */ -enum { - NET_ROSE_RESTART_REQUEST_TIMEOUT=1, - NET_ROSE_CALL_REQUEST_TIMEOUT=2, - NET_ROSE_RESET_REQUEST_TIMEOUT=3, - NET_ROSE_CLEAR_REQUEST_TIMEOUT=4, - NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5, - NET_ROSE_ROUTING_CONTROL=6, - NET_ROSE_LINK_FAIL_TIMEOUT=7, - NET_ROSE_MAX_VCS=8, - NET_ROSE_WINDOW_SIZE=9, - NET_ROSE_NO_ACTIVITY_TIMEOUT=10 -}; - -/* /proc/sys/net/x25 */ -enum { - NET_X25_RESTART_REQUEST_TIMEOUT=1, - NET_X25_CALL_REQUEST_TIMEOUT=2, - NET_X25_RESET_REQUEST_TIMEOUT=3, - NET_X25_CLEAR_REQUEST_TIMEOUT=4, - NET_X25_ACK_HOLD_BACK_TIMEOUT=5, - NET_X25_FORWARD=6 -}; - -/* /proc/sys/net/token-ring */ -enum -{ - NET_TR_RIF_TIMEOUT=1 -}; - -/* /proc/sys/net/decnet/ */ -enum { - NET_DECNET_NODE_TYPE = 1, - NET_DECNET_NODE_ADDRESS = 2, - NET_DECNET_NODE_NAME = 3, - NET_DECNET_DEFAULT_DEVICE = 4, - NET_DECNET_TIME_WAIT = 5, - NET_DECNET_DN_COUNT = 6, - NET_DECNET_DI_COUNT = 7, - NET_DECNET_DR_COUNT = 8, - NET_DECNET_DST_GC_INTERVAL = 9, - NET_DECNET_CONF = 10, - NET_DECNET_NO_FC_MAX_CWND = 11, - NET_DECNET_MEM = 12, - NET_DECNET_RMEM = 13, - NET_DECNET_WMEM = 14, - NET_DECNET_DEBUG_LEVEL = 255 -}; - -/* /proc/sys/net/decnet/conf/ */ -enum { - NET_DECNET_CONF_LOOPBACK = -2, - NET_DECNET_CONF_DDCMP = -3, - NET_DECNET_CONF_PPP = -4, - NET_DECNET_CONF_X25 = -5, - NET_DECNET_CONF_GRE = -6, - NET_DECNET_CONF_ETHER = -7 - - /* ... and ifindex of devices */ -}; - -/* /proc/sys/net/decnet/conf// */ -enum { - NET_DECNET_CONF_DEV_PRIORITY = 1, - NET_DECNET_CONF_DEV_T1 = 2, - NET_DECNET_CONF_DEV_T2 = 3, - NET_DECNET_CONF_DEV_T3 = 4, - NET_DECNET_CONF_DEV_FORWARDING = 5, - NET_DECNET_CONF_DEV_BLKSIZE = 6, - NET_DECNET_CONF_DEV_STATE = 7 -}; - -/* /proc/sys/net/sctp */ -enum { - NET_SCTP_RTO_INITIAL = 1, - NET_SCTP_RTO_MIN = 2, - NET_SCTP_RTO_MAX = 3, - NET_SCTP_RTO_ALPHA = 4, - NET_SCTP_RTO_BETA = 5, - NET_SCTP_VALID_COOKIE_LIFE = 6, - NET_SCTP_ASSOCIATION_MAX_RETRANS = 7, - NET_SCTP_PATH_MAX_RETRANS = 8, - NET_SCTP_MAX_INIT_RETRANSMITS = 9, - NET_SCTP_HB_INTERVAL = 10, - NET_SCTP_PRESERVE_ENABLE = 11, - NET_SCTP_MAX_BURST = 12, - NET_SCTP_ADDIP_ENABLE = 13, - NET_SCTP_PRSCTP_ENABLE = 14, - NET_SCTP_SNDBUF_POLICY = 15, - NET_SCTP_SACK_TIMEOUT = 16, - NET_SCTP_RCVBUF_POLICY = 17, -}; - -/* /proc/sys/net/bridge */ -enum { - NET_BRIDGE_NF_CALL_ARPTABLES = 1, - NET_BRIDGE_NF_CALL_IPTABLES = 2, - NET_BRIDGE_NF_CALL_IP6TABLES = 3, - NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4, - NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5, -}; - -/* proc/sys/net/irda */ -enum { - NET_IRDA_DISCOVERY=1, - NET_IRDA_DEVNAME=2, - NET_IRDA_DEBUG=3, - NET_IRDA_FAST_POLL=4, - NET_IRDA_DISCOVERY_SLOTS=5, - NET_IRDA_DISCOVERY_TIMEOUT=6, - NET_IRDA_SLOT_TIMEOUT=7, - NET_IRDA_MAX_BAUD_RATE=8, - NET_IRDA_MIN_TX_TURN_TIME=9, - NET_IRDA_MAX_TX_DATA_SIZE=10, - NET_IRDA_MAX_TX_WINDOW=11, - NET_IRDA_MAX_NOREPLY_TIME=12, - NET_IRDA_WARN_NOREPLY_TIME=13, - NET_IRDA_LAP_KEEPALIVE_TIME=14, -}; - - -/* CTL_FS names: */ -enum -{ - FS_NRINODE=1, /* int:current number of allocated inodes */ - FS_STATINODE=2, - FS_MAXINODE=3, /* int:maximum number of inodes that can be allocated */ - FS_NRDQUOT=4, /* int:current number of allocated dquots */ - FS_MAXDQUOT=5, /* int:maximum number of dquots that can be allocated */ - FS_NRFILE=6, /* int:current number of allocated filedescriptors */ - FS_MAXFILE=7, /* int:maximum number of filedescriptors that can be allocated */ - FS_DENTRY=8, - FS_NRSUPER=9, /* int:current number of allocated super_blocks */ - FS_MAXSUPER=10, /* int:maximum number of super_blocks that can be allocated */ - FS_OVERFLOWUID=11, /* int: overflow UID */ - FS_OVERFLOWGID=12, /* int: overflow GID */ - FS_LEASES=13, /* int: leases enabled */ - FS_DIR_NOTIFY=14, /* int: directory notification enabled */ - FS_LEASE_TIME=15, /* int: maximum time to wait for a lease break */ - FS_DQSTATS=16, /* disc quota usage statistics and control */ - FS_XFS=17, /* struct: control xfs parameters */ - FS_AIO_NR=18, /* current system-wide number of aio requests */ - FS_AIO_MAX_NR=19, /* system-wide maximum number of aio requests */ - FS_INOTIFY=20, /* inotify submenu */ - FS_OCFS2=988, /* ocfs2 */ -}; - -/* /proc/sys/fs/quota/ */ -enum { - FS_DQ_LOOKUPS = 1, - FS_DQ_DROPS = 2, - FS_DQ_READS = 3, - FS_DQ_WRITES = 4, - FS_DQ_CACHE_HITS = 5, - FS_DQ_ALLOCATED = 6, - FS_DQ_FREE = 7, - FS_DQ_SYNCS = 8, - FS_DQ_WARNINGS = 9, -}; - -/* CTL_DEBUG names: */ - -/* CTL_DEV names: */ -enum { - DEV_CDROM=1, - DEV_HWMON=2, - DEV_PARPORT=3, - DEV_RAID=4, - DEV_MAC_HID=5, - DEV_SCSI=6, - DEV_IPMI=7, -}; - -/* /proc/sys/dev/cdrom */ -enum { - DEV_CDROM_INFO=1, - DEV_CDROM_AUTOCLOSE=2, - DEV_CDROM_AUTOEJECT=3, - DEV_CDROM_DEBUG=4, - DEV_CDROM_LOCK=5, - DEV_CDROM_CHECK_MEDIA=6 -}; - -/* /proc/sys/dev/parport */ -enum { - DEV_PARPORT_DEFAULT=-3 -}; - -/* /proc/sys/dev/raid */ -enum { - DEV_RAID_SPEED_LIMIT_MIN=1, - DEV_RAID_SPEED_LIMIT_MAX=2 -}; - -/* /proc/sys/dev/parport/default */ -enum { - DEV_PARPORT_DEFAULT_TIMESLICE=1, - DEV_PARPORT_DEFAULT_SPINTIME=2 -}; - -/* /proc/sys/dev/parport/parport n */ -enum { - DEV_PARPORT_SPINTIME=1, - DEV_PARPORT_BASE_ADDR=2, - DEV_PARPORT_IRQ=3, - DEV_PARPORT_DMA=4, - DEV_PARPORT_MODES=5, - DEV_PARPORT_DEVICES=6, - DEV_PARPORT_AUTOPROBE=16 -}; - -/* /proc/sys/dev/parport/parport n/devices/ */ -enum { - DEV_PARPORT_DEVICES_ACTIVE=-3, -}; - -/* /proc/sys/dev/parport/parport n/devices/device n */ -enum { - DEV_PARPORT_DEVICE_TIMESLICE=1, -}; - -/* /proc/sys/dev/mac_hid */ -enum { - DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1, - DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2, - DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3, - DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4, - DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5, - DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6 -}; - -/* /proc/sys/dev/scsi */ -enum { - DEV_SCSI_LOGGING_LEVEL=1, -}; - -/* /proc/sys/dev/ipmi */ -enum { - DEV_IPMI_POWEROFF_POWERCYCLE=1, -}; - -/* /proc/sys/abi */ -enum -{ - ABI_DEFHANDLER_COFF=1, /* default handler for coff binaries */ - ABI_DEFHANDLER_ELF=2, /* default handler for ELF binaries */ - ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */ - ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */ - ABI_TRACE=5, /* tracing flags */ - ABI_FAKE_UTSNAME=6, /* fake target utsname information */ -}; - -#ifdef __KERNEL__ #include #include #include #include +#include /* For the /proc/sys support */ struct ctl_table; @@ -1122,6 +215,4 @@ static inline void setup_sysctl_set(struct ctl_table_set *p, #endif /* CONFIG_SYSCTL */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_SYSCTL_H */ diff --git a/include/linux/sysinfo.h b/include/linux/sysinfo.h deleted file mode 100644 index 934335a22522..000000000000 --- a/include/linux/sysinfo.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _LINUX_SYSINFO_H -#define _LINUX_SYSINFO_H - -#include - -#define SI_LOAD_SHIFT 16 -struct sysinfo { - __kernel_long_t uptime; /* Seconds since boot */ - __kernel_ulong_t loads[3]; /* 1, 5, and 15 minute load averages */ - __kernel_ulong_t totalram; /* Total usable main memory size */ - __kernel_ulong_t freeram; /* Available memory size */ - __kernel_ulong_t sharedram; /* Amount of shared memory */ - __kernel_ulong_t bufferram; /* Memory used by buffers */ - __kernel_ulong_t totalswap; /* Total swap space size */ - __kernel_ulong_t freeswap; /* swap space still available */ - __u16 procs; /* Number of current processes */ - __u16 pad; /* Explicit padding for m68k */ - __kernel_ulong_t totalhigh; /* Total high memory size */ - __kernel_ulong_t freehigh; /* Available high memory size */ - __u32 mem_unit; /* Memory unit size in bytes */ - char _f[20-2*sizeof(__kernel_ulong_t)-sizeof(__u32)]; /* Padding: libc5 uses this.. */ -}; - -#endif /* _LINUX_SYSINFO_H */ diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h deleted file mode 100644 index 2466e550a41d..000000000000 --- a/include/linux/taskstats.h +++ /dev/null @@ -1,213 +0,0 @@ -/* taskstats.h - exporting per-task statistics - * - * Copyright (C) Shailabh Nagar, IBM Corp. 2006 - * (C) Balbir Singh, IBM Corp. 2006 - * (C) Jay Lan, SGI, 2006 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2.1 of the GNU Lesser General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - */ - -#ifndef _LINUX_TASKSTATS_H -#define _LINUX_TASKSTATS_H - -#include - -/* Format for per-task data returned to userland when - * - a task exits - * - listener requests stats for a task - * - * The struct is versioned. Newer versions should only add fields to - * the bottom of the struct to maintain backward compatibility. - * - * - * To add new fields - * a) bump up TASKSTATS_VERSION - * b) add comment indicating new version number at end of struct - * c) add new fields after version comment; maintain 64-bit alignment - */ - - -#define TASKSTATS_VERSION 8 -#define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN - * in linux/sched.h */ - -struct taskstats { - - /* The version number of this struct. This field is always set to - * TAKSTATS_VERSION, which is defined in . - * Each time the struct is changed, the value should be incremented. - */ - __u16 version; - __u32 ac_exitcode; /* Exit status */ - - /* The accounting flags of a task as defined in - * Defined values are AFORK, ASU, ACOMPAT, ACORE, and AXSIG. - */ - __u8 ac_flag; /* Record flags */ - __u8 ac_nice; /* task_nice */ - - /* Delay accounting fields start - * - * All values, until comment "Delay accounting fields end" are - * available only if delay accounting is enabled, even though the last - * few fields are not delays - * - * xxx_count is the number of delay values recorded - * xxx_delay_total is the corresponding cumulative delay in nanoseconds - * - * xxx_delay_total wraps around to zero on overflow - * xxx_count incremented regardless of overflow - */ - - /* Delay waiting for cpu, while runnable - * count, delay_total NOT updated atomically - */ - __u64 cpu_count __attribute__((aligned(8))); - __u64 cpu_delay_total; - - /* Following four fields atomically updated using task->delays->lock */ - - /* Delay waiting for synchronous block I/O to complete - * does not account for delays in I/O submission - */ - __u64 blkio_count; - __u64 blkio_delay_total; - - /* Delay waiting for page fault I/O (swap in only) */ - __u64 swapin_count; - __u64 swapin_delay_total; - - /* cpu "wall-clock" running time - * On some architectures, value will adjust for cpu time stolen - * from the kernel in involuntary waits due to virtualization. - * Value is cumulative, in nanoseconds, without a corresponding count - * and wraps around to zero silently on overflow - */ - __u64 cpu_run_real_total; - - /* cpu "virtual" running time - * Uses time intervals seen by the kernel i.e. no adjustment - * for kernel's involuntary waits due to virtualization. - * Value is cumulative, in nanoseconds, without a corresponding count - * and wraps around to zero silently on overflow - */ - __u64 cpu_run_virtual_total; - /* Delay accounting fields end */ - /* version 1 ends here */ - - /* Basic Accounting Fields start */ - char ac_comm[TS_COMM_LEN]; /* Command name */ - __u8 ac_sched __attribute__((aligned(8))); - /* Scheduling discipline */ - __u8 ac_pad[3]; - __u32 ac_uid __attribute__((aligned(8))); - /* User ID */ - __u32 ac_gid; /* Group ID */ - __u32 ac_pid; /* Process ID */ - __u32 ac_ppid; /* Parent process ID */ - __u32 ac_btime; /* Begin time [sec since 1970] */ - __u64 ac_etime __attribute__((aligned(8))); - /* Elapsed time [usec] */ - __u64 ac_utime; /* User CPU time [usec] */ - __u64 ac_stime; /* SYstem CPU time [usec] */ - __u64 ac_minflt; /* Minor Page Fault Count */ - __u64 ac_majflt; /* Major Page Fault Count */ - /* Basic Accounting Fields end */ - - /* Extended accounting fields start */ - /* Accumulated RSS usage in duration of a task, in MBytes-usecs. - * The current rss usage is added to this counter every time - * a tick is charged to a task's system time. So, at the end we - * will have memory usage multiplied by system time. Thus an - * average usage per system time unit can be calculated. - */ - __u64 coremem; /* accumulated RSS usage in MB-usec */ - /* Accumulated virtual memory usage in duration of a task. - * Same as acct_rss_mem1 above except that we keep track of VM usage. - */ - __u64 virtmem; /* accumulated VM usage in MB-usec */ - - /* High watermark of RSS and virtual memory usage in duration of - * a task, in KBytes. - */ - __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */ - __u64 hiwater_vm; /* High-water VM usage, in KB */ - - /* The following four fields are I/O statistics of a task. */ - __u64 read_char; /* bytes read */ - __u64 write_char; /* bytes written */ - __u64 read_syscalls; /* read syscalls */ - __u64 write_syscalls; /* write syscalls */ - /* Extended accounting fields end */ - -#define TASKSTATS_HAS_IO_ACCOUNTING - /* Per-task storage I/O accounting starts */ - __u64 read_bytes; /* bytes of read I/O */ - __u64 write_bytes; /* bytes of write I/O */ - __u64 cancelled_write_bytes; /* bytes of cancelled write I/O */ - - __u64 nvcsw; /* voluntary_ctxt_switches */ - __u64 nivcsw; /* nonvoluntary_ctxt_switches */ - - /* time accounting for SMT machines */ - __u64 ac_utimescaled; /* utime scaled on frequency etc */ - __u64 ac_stimescaled; /* stime scaled on frequency etc */ - __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */ - - /* Delay waiting for memory reclaim */ - __u64 freepages_count; - __u64 freepages_delay_total; -}; - - -/* - * Commands sent from userspace - * Not versioned. New commands should only be inserted at the enum's end - * prior to __TASKSTATS_CMD_MAX - */ - -enum { - TASKSTATS_CMD_UNSPEC = 0, /* Reserved */ - TASKSTATS_CMD_GET, /* user->kernel request/get-response */ - TASKSTATS_CMD_NEW, /* kernel->user event */ - __TASKSTATS_CMD_MAX, -}; - -#define TASKSTATS_CMD_MAX (__TASKSTATS_CMD_MAX - 1) - -enum { - TASKSTATS_TYPE_UNSPEC = 0, /* Reserved */ - TASKSTATS_TYPE_PID, /* Process id */ - TASKSTATS_TYPE_TGID, /* Thread group id */ - TASKSTATS_TYPE_STATS, /* taskstats structure */ - TASKSTATS_TYPE_AGGR_PID, /* contains pid + stats */ - TASKSTATS_TYPE_AGGR_TGID, /* contains tgid + stats */ - TASKSTATS_TYPE_NULL, /* contains nothing */ - __TASKSTATS_TYPE_MAX, -}; - -#define TASKSTATS_TYPE_MAX (__TASKSTATS_TYPE_MAX - 1) - -enum { - TASKSTATS_CMD_ATTR_UNSPEC = 0, - TASKSTATS_CMD_ATTR_PID, - TASKSTATS_CMD_ATTR_TGID, - TASKSTATS_CMD_ATTR_REGISTER_CPUMASK, - TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK, - __TASKSTATS_CMD_ATTR_MAX, -}; - -#define TASKSTATS_CMD_ATTR_MAX (__TASKSTATS_CMD_ATTR_MAX - 1) - -/* NETLINK_GENERIC related info */ - -#define TASKSTATS_GENL_NAME "TASKSTATS" -#define TASKSTATS_GENL_VERSION 0x1 - -#endif /* _LINUX_TASKSTATS_H */ diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 67c789ae719c..8a7fc4be2d75 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -17,217 +17,13 @@ #ifndef _LINUX_TCP_H #define _LINUX_TCP_H -#include -#include -#include - -struct tcphdr { - __be16 source; - __be16 dest; - __be32 seq; - __be32 ack_seq; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u16 res1:4, - doff:4, - fin:1, - syn:1, - rst:1, - psh:1, - ack:1, - urg:1, - ece:1, - cwr:1; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u16 doff:4, - res1:4, - cwr:1, - ece:1, - urg:1, - ack:1, - psh:1, - rst:1, - syn:1, - fin:1; -#else -#error "Adjust your defines" -#endif - __be16 window; - __sum16 check; - __be16 urg_ptr; -}; - -/* - * The union cast uses a gcc extension to avoid aliasing problems - * (union is compatible to any of its members) - * This means this part of the code is -fstrict-aliasing safe now. - */ -union tcp_word_hdr { - struct tcphdr hdr; - __be32 words[5]; -}; - -#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) - -enum { - TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000), - TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000), - TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000), - TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000), - TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000), - TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000), - TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000), - TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000), - TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000), - TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000) -}; - -/* - * TCP general constants - */ -#define TCP_MSS_DEFAULT 536U /* IPv4 (RFC1122, RFC2581) */ -#define TCP_MSS_DESIRED 1220U /* IPv6 (tunneled), EDNS0 (RFC3226) */ - -/* TCP socket options */ -#define TCP_NODELAY 1 /* Turn off Nagle's algorithm. */ -#define TCP_MAXSEG 2 /* Limit MSS */ -#define TCP_CORK 3 /* Never send partially complete segments */ -#define TCP_KEEPIDLE 4 /* Start keeplives after this period */ -#define TCP_KEEPINTVL 5 /* Interval between keepalives */ -#define TCP_KEEPCNT 6 /* Number of keepalives before death */ -#define TCP_SYNCNT 7 /* Number of SYN retransmits */ -#define TCP_LINGER2 8 /* Life time of orphaned FIN-WAIT-2 state */ -#define TCP_DEFER_ACCEPT 9 /* Wake up listener only when data arrive */ -#define TCP_WINDOW_CLAMP 10 /* Bound advertised window */ -#define TCP_INFO 11 /* Information about this connection. */ -#define TCP_QUICKACK 12 /* Block/reenable quick acks */ -#define TCP_CONGESTION 13 /* Congestion control algorithm */ -#define TCP_MD5SIG 14 /* TCP MD5 Signature (RFC2385) */ -#define TCP_COOKIE_TRANSACTIONS 15 /* TCP Cookie Transactions */ -#define TCP_THIN_LINEAR_TIMEOUTS 16 /* Use linear timeouts for thin streams*/ -#define TCP_THIN_DUPACK 17 /* Fast retrans. after 1 dupack */ -#define TCP_USER_TIMEOUT 18 /* How long for loss retry before timeout */ -#define TCP_REPAIR 19 /* TCP sock is under repair right now */ -#define TCP_REPAIR_QUEUE 20 -#define TCP_QUEUE_SEQ 21 -#define TCP_REPAIR_OPTIONS 22 -#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */ - -struct tcp_repair_opt { - __u32 opt_code; - __u32 opt_val; -}; - -enum { - TCP_NO_QUEUE, - TCP_RECV_QUEUE, - TCP_SEND_QUEUE, - TCP_QUEUES_NR, -}; - -/* for TCP_INFO socket option */ -#define TCPI_OPT_TIMESTAMPS 1 -#define TCPI_OPT_SACK 2 -#define TCPI_OPT_WSCALE 4 -#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ -#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ - -enum tcp_ca_state { - TCP_CA_Open = 0, -#define TCPF_CA_Open (1< #include #include #include #include +#include static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb) { @@ -595,6 +391,4 @@ static inline int fastopen_init_queue(struct sock *sk, int backlog) return 0; } -#endif /* __KERNEL__ */ - #endif /* _LINUX_TCP_H */ diff --git a/include/linux/tcp_metrics.h b/include/linux/tcp_metrics.h deleted file mode 100644 index cb5157b55f32..000000000000 --- a/include/linux/tcp_metrics.h +++ /dev/null @@ -1,54 +0,0 @@ -/* tcp_metrics.h - TCP Metrics Interface */ - -#ifndef _LINUX_TCP_METRICS_H -#define _LINUX_TCP_METRICS_H - -#include - -/* NETLINK_GENERIC related info - */ -#define TCP_METRICS_GENL_NAME "tcp_metrics" -#define TCP_METRICS_GENL_VERSION 0x1 - -enum tcp_metric_index { - TCP_METRIC_RTT, - TCP_METRIC_RTTVAR, - TCP_METRIC_SSTHRESH, - TCP_METRIC_CWND, - TCP_METRIC_REORDERING, - - /* Always last. */ - __TCP_METRIC_MAX, -}; - -#define TCP_METRIC_MAX (__TCP_METRIC_MAX - 1) - -enum { - TCP_METRICS_ATTR_UNSPEC, - TCP_METRICS_ATTR_ADDR_IPV4, /* u32 */ - TCP_METRICS_ATTR_ADDR_IPV6, /* binary */ - TCP_METRICS_ATTR_AGE, /* msecs */ - TCP_METRICS_ATTR_TW_TSVAL, /* u32, raw, rcv tsval */ - TCP_METRICS_ATTR_TW_TS_STAMP, /* s32, sec age */ - TCP_METRICS_ATTR_VALS, /* nested +1, u32 */ - TCP_METRICS_ATTR_FOPEN_MSS, /* u16 */ - TCP_METRICS_ATTR_FOPEN_SYN_DROPS, /* u16, count of drops */ - TCP_METRICS_ATTR_FOPEN_SYN_DROP_TS, /* msecs age */ - TCP_METRICS_ATTR_FOPEN_COOKIE, /* binary */ - - __TCP_METRICS_ATTR_MAX, -}; - -#define TCP_METRICS_ATTR_MAX (__TCP_METRICS_ATTR_MAX - 1) - -enum { - TCP_METRICS_CMD_UNSPEC, - TCP_METRICS_CMD_GET, - TCP_METRICS_CMD_DEL, - - __TCP_METRICS_CMD_MAX, -}; - -#define TCP_METRICS_CMD_MAX (__TCP_METRICS_CMD_MAX - 1) - -#endif /* _LINUX_TCP_METRICS_H */ diff --git a/include/linux/telephony.h b/include/linux/telephony.h deleted file mode 100644 index f63afe330add..000000000000 --- a/include/linux/telephony.h +++ /dev/null @@ -1,262 +0,0 @@ -/****************************************************************************** - * - * telephony.h - * - * Basic Linux Telephony Interface - * - * (c) Copyright 1999-2001 Quicknet Technologies, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Authors: Ed Okerson, - * Greg Herlein, - * - * Contributors: Alan Cox, - * David W. Erhart, - * - * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR - * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT - * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET - * TECHNOLOGIES, INC. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION - * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. - * - *****************************************************************************/ - -#ifndef TELEPHONY_H -#define TELEPHONY_H - -#define TELEPHONY_VERSION 3013 - -#define PHONE_VENDOR_IXJ 1 -#define PHONE_VENDOR_QUICKNET PHONE_VENDOR_IXJ -#define PHONE_VENDOR_VOICETRONIX 2 -#define PHONE_VENDOR_ACULAB 3 -#define PHONE_VENDOR_DIGI 4 -#define PHONE_VENDOR_FRANKLIN 5 - -/****************************************************************************** - * Vendor Summary Information Area - * - * Quicknet Technologies, Inc. - makes low density analog telephony cards - * with audio compression, POTS and PSTN interfaces (www.quicknet.net) - * - * (other vendors following this API shuld add a short description of - * the telephony products they support under Linux) - * - *****************************************************************************/ -#define QTI_PHONEJACK 100 -#define QTI_LINEJACK 300 -#define QTI_PHONEJACK_LITE 400 -#define QTI_PHONEJACK_PCI 500 -#define QTI_PHONECARD 600 - -/****************************************************************************** -* -* The capabilities ioctls can inform you of the capabilities of each phone -* device installed in your system. The PHONECTL_CAPABILITIES ioctl -* returns an integer value indicating the number of capabilities the -* device has. The PHONECTL_CAPABILITIES_LIST will fill an array of -* capability structs with all of its capabilities. The -* PHONECTL_CAPABILITIES_CHECK takes a single capability struct and returns -* a TRUE if the device has that capability, otherwise it returns false. -* -******************************************************************************/ -typedef enum { - vendor = 0, - device, - port, - codec, - dsp -} phone_cap; - -struct phone_capability { - char desc[80]; - phone_cap captype; - int cap; - int handle; -}; - -typedef enum { - pots = 0, - pstn, - handset, - speaker -} phone_ports; - -#define PHONE_CAPABILITIES _IO ('q', 0x80) -#define PHONE_CAPABILITIES_LIST _IOR ('q', 0x81, struct phone_capability *) -#define PHONE_CAPABILITIES_CHECK _IOW ('q', 0x82, struct phone_capability *) - -typedef struct { - char month[3]; - char day[3]; - char hour[3]; - char min[3]; - int numlen; - char number[11]; - int namelen; - char name[80]; -} PHONE_CID; - -#define PHONE_RING _IO ('q', 0x83) -#define PHONE_HOOKSTATE _IO ('q', 0x84) -#define PHONE_MAXRINGS _IOW ('q', 0x85, char) -#define PHONE_RING_CADENCE _IOW ('q', 0x86, short) -#define OLD_PHONE_RING_START _IO ('q', 0x87) -#define PHONE_RING_START _IOW ('q', 0x87, PHONE_CID *) -#define PHONE_RING_STOP _IO ('q', 0x88) - -#define USA_RING_CADENCE 0xC0C0 - -#define PHONE_REC_CODEC _IOW ('q', 0x89, int) -#define PHONE_REC_START _IO ('q', 0x8A) -#define PHONE_REC_STOP _IO ('q', 0x8B) -#define PHONE_REC_DEPTH _IOW ('q', 0x8C, int) -#define PHONE_FRAME _IOW ('q', 0x8D, int) -#define PHONE_REC_VOLUME _IOW ('q', 0x8E, int) -#define PHONE_REC_VOLUME_LINEAR _IOW ('q', 0xDB, int) -#define PHONE_REC_LEVEL _IO ('q', 0x8F) - -#define PHONE_PLAY_CODEC _IOW ('q', 0x90, int) -#define PHONE_PLAY_START _IO ('q', 0x91) -#define PHONE_PLAY_STOP _IO ('q', 0x92) -#define PHONE_PLAY_DEPTH _IOW ('q', 0x93, int) -#define PHONE_PLAY_VOLUME _IOW ('q', 0x94, int) -#define PHONE_PLAY_VOLUME_LINEAR _IOW ('q', 0xDC, int) -#define PHONE_PLAY_LEVEL _IO ('q', 0x95) -#define PHONE_DTMF_READY _IOR ('q', 0x96, int) -#define PHONE_GET_DTMF _IOR ('q', 0x97, int) -#define PHONE_GET_DTMF_ASCII _IOR ('q', 0x98, int) -#define PHONE_DTMF_OOB _IOW ('q', 0x99, int) -#define PHONE_EXCEPTION _IOR ('q', 0x9A, int) -#define PHONE_PLAY_TONE _IOW ('q', 0x9B, char) -#define PHONE_SET_TONE_ON_TIME _IOW ('q', 0x9C, int) -#define PHONE_SET_TONE_OFF_TIME _IOW ('q', 0x9D, int) -#define PHONE_GET_TONE_ON_TIME _IO ('q', 0x9E) -#define PHONE_GET_TONE_OFF_TIME _IO ('q', 0x9F) -#define PHONE_GET_TONE_STATE _IO ('q', 0xA0) -#define PHONE_BUSY _IO ('q', 0xA1) -#define PHONE_RINGBACK _IO ('q', 0xA2) -#define PHONE_DIALTONE _IO ('q', 0xA3) -#define PHONE_CPT_STOP _IO ('q', 0xA4) - -#define PHONE_PSTN_SET_STATE _IOW ('q', 0xA4, int) -#define PHONE_PSTN_GET_STATE _IO ('q', 0xA5) - -#define PSTN_ON_HOOK 0 -#define PSTN_RINGING 1 -#define PSTN_OFF_HOOK 2 -#define PSTN_PULSE_DIAL 3 - -/****************************************************************************** -* -* The wink duration is tunable with this ioctl. The default wink duration -* is 320ms. You do not need to use this ioctl if you do not require a -* different wink duration. -* -******************************************************************************/ -#define PHONE_WINK_DURATION _IOW ('q', 0xA6, int) -#define PHONE_WINK _IOW ('q', 0xAA, int) - -/****************************************************************************** -* -* Codec Definitions -* -******************************************************************************/ -typedef enum { - G723_63 = 1, - G723_53 = 2, - TS85 = 3, - TS48 = 4, - TS41 = 5, - G728 = 6, - G729 = 7, - ULAW = 8, - ALAW = 9, - LINEAR16 = 10, - LINEAR8 = 11, - WSS = 12, - G729B = 13 -} phone_codec; - -struct phone_codec_data -{ - phone_codec type; - unsigned short buf_min, buf_opt, buf_max; -}; - -#define PHONE_QUERY_CODEC _IOWR ('q', 0xA7, struct phone_codec_data *) -#define PHONE_PSTN_LINETEST _IO ('q', 0xA8) - -/****************************************************************************** -* -* This controls the VAD/CNG functionality of G.723.1. The driver will -* always pass full size frames, any unused bytes will be padded with zeros, -* and frames passed to the driver should also be padded with zeros. The -* frame type is encoded in the least significant two bits of the first -* WORD of the frame as follows: -* -* bits 1-0 Frame Type Data Rate Significant Words -* 00 0 G.723.1 6.3 12 -* 01 1 G.723.1 5.3 10 -* 10 2 VAD/CNG 2 -* 11 3 Repeat last CNG 2 bits -* -******************************************************************************/ -#define PHONE_VAD _IOW ('q', 0xA9, int) - - -/****************************************************************************** -* -* The exception structure allows us to multiplex multiple events onto the -* select() exception set. If any of these flags are set select() will -* return with a positive indication on the exception set. The dtmf_ready -* bit indicates if there is data waiting in the DTMF buffer. The -* hookstate bit is set if there is a change in hookstate status, it does not -* indicate the current state of the hookswitch. The pstn_ring bit -* indicates that the DAA on a LineJACK card has detected ring voltage on -* the PSTN port. The caller_id bit indicates that caller_id data has been -* received and is available. The pstn_wink bit indicates that the DAA on -* the LineJACK has received a wink from the telco switch. The f0, f1, f2 -* and f3 bits indicate that the filter has been triggered by detecting the -* frequency programmed into that filter. -* -* The remaining bits should be set to zero. They will become defined over time -* for other interface cards and their needs. -* -******************************************************************************/ -struct phone_except -{ - unsigned int dtmf_ready:1; - unsigned int hookstate:1; - unsigned int pstn_ring:1; - unsigned int caller_id:1; - unsigned int pstn_wink:1; - unsigned int f0:1; - unsigned int f1:1; - unsigned int f2:1; - unsigned int f3:1; - unsigned int flash:1; - unsigned int fc0:1; - unsigned int fc1:1; - unsigned int fc2:1; - unsigned int fc3:1; - unsigned int reserved:18; -}; - -union telephony_exception { - struct phone_except bits; - unsigned int bytes; -}; - - -#endif /* TELEPHONY_H */ - diff --git a/include/linux/termios.h b/include/linux/termios.h deleted file mode 100644 index 2acd0c1f8a2a..000000000000 --- a/include/linux/termios.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _LINUX_TERMIOS_H -#define _LINUX_TERMIOS_H - -#include -#include - -#define NFF 5 - -struct termiox -{ - __u16 x_hflag; - __u16 x_cflag; - __u16 x_rflag[NFF]; - __u16 x_sflag; -}; - -#define RTSXOFF 0x0001 /* RTS flow control on input */ -#define CTSXON 0x0002 /* CTS flow control on output */ -#define DTRXOFF 0x0004 /* DTR flow control on input */ -#define DSRXON 0x0008 /* DCD flow control on output */ - -#endif diff --git a/include/linux/time.h b/include/linux/time.h index b51e664c83e7..4d358e9d10f1 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -1,33 +1,10 @@ #ifndef _LINUX_TIME_H #define _LINUX_TIME_H -#include - -#ifdef __KERNEL__ # include # include # include -#endif - -#ifndef _STRUCT_TIMESPEC -#define _STRUCT_TIMESPEC -struct timespec { - __kernel_time_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ -}; -#endif - -struct timeval { - __kernel_time_t tv_sec; /* seconds */ - __kernel_suseconds_t tv_usec; /* microseconds */ -}; - -struct timezone { - int tz_minuteswest; /* minutes west of Greenwich */ - int tz_dsttime; /* type of dst correction */ -}; - -#ifdef __KERNEL__ +#include extern struct timezone sys_tz; @@ -280,51 +257,4 @@ static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) a->tv_nsec = ns; } -#endif /* __KERNEL__ */ - -/* - * Names of the interval timers, and structure - * defining a timer setting: - */ -#define ITIMER_REAL 0 -#define ITIMER_VIRTUAL 1 -#define ITIMER_PROF 2 - -struct itimerspec { - struct timespec it_interval; /* timer period */ - struct timespec it_value; /* timer expiration */ -}; - -struct itimerval { - struct timeval it_interval; /* timer interval */ - struct timeval it_value; /* current value */ -}; - -/* - * The IDs of the various system clocks (for POSIX.1b interval timers): - */ -#define CLOCK_REALTIME 0 -#define CLOCK_MONOTONIC 1 -#define CLOCK_PROCESS_CPUTIME_ID 2 -#define CLOCK_THREAD_CPUTIME_ID 3 -#define CLOCK_MONOTONIC_RAW 4 -#define CLOCK_REALTIME_COARSE 5 -#define CLOCK_MONOTONIC_COARSE 6 -#define CLOCK_BOOTTIME 7 -#define CLOCK_REALTIME_ALARM 8 -#define CLOCK_BOOTTIME_ALARM 9 - -/* - * The IDs of various hardware clocks: - */ -#define CLOCK_SGI_CYCLE 10 -#define MAX_CLOCKS 16 -#define CLOCKS_MASK (CLOCK_REALTIME | CLOCK_MONOTONIC) -#define CLOCKS_MONO CLOCK_MONOTONIC - -/* - * The various flags for setting POSIX.1b interval timers: - */ -#define TIMER_ABSTIME 0x01 - #endif diff --git a/include/linux/times.h b/include/linux/times.h deleted file mode 100644 index 87b62615cedd..000000000000 --- a/include/linux/times.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _LINUX_TIMES_H -#define _LINUX_TIMES_H - -#include - -struct tms { - __kernel_clock_t tms_utime; - __kernel_clock_t tms_stime; - __kernel_clock_t tms_cutime; - __kernel_clock_t tms_cstime; -}; - -#endif diff --git a/include/linux/timex.h b/include/linux/timex.h index 7c5ceb20e03a..5ec87c60b97c 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -53,120 +53,11 @@ #ifndef _LINUX_TIMEX_H #define _LINUX_TIMEX_H -#include +#include -#define NTP_API 4 /* NTP API version */ - -/* - * syscall interface - used (mainly by NTP daemon) - * to discipline kernel clock oscillator - */ -struct timex { - unsigned int modes; /* mode selector */ - long offset; /* time offset (usec) */ - long freq; /* frequency offset (scaled ppm) */ - long maxerror; /* maximum error (usec) */ - long esterror; /* estimated error (usec) */ - int status; /* clock command/status */ - long constant; /* pll time constant */ - long precision; /* clock precision (usec) (read only) */ - long tolerance; /* clock frequency tolerance (ppm) - * (read only) - */ - struct timeval time; /* (read only, except for ADJ_SETOFFSET) */ - long tick; /* (modified) usecs between clock ticks */ - - long ppsfreq; /* pps frequency (scaled ppm) (ro) */ - long jitter; /* pps jitter (us) (ro) */ - int shift; /* interval duration (s) (shift) (ro) */ - long stabil; /* pps stability (scaled ppm) (ro) */ - long jitcnt; /* jitter limit exceeded (ro) */ - long calcnt; /* calibration intervals (ro) */ - long errcnt; /* calibration errors (ro) */ - long stbcnt; /* stability limit exceeded (ro) */ - - int tai; /* TAI offset (ro) */ - - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; int :32; - int :32; int :32; int :32; -}; - -/* - * Mode codes (timex.mode) - */ -#define ADJ_OFFSET 0x0001 /* time offset */ -#define ADJ_FREQUENCY 0x0002 /* frequency offset */ -#define ADJ_MAXERROR 0x0004 /* maximum time error */ -#define ADJ_ESTERROR 0x0008 /* estimated time error */ -#define ADJ_STATUS 0x0010 /* clock status */ -#define ADJ_TIMECONST 0x0020 /* pll time constant */ -#define ADJ_TAI 0x0080 /* set TAI offset */ -#define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ -#define ADJ_MICRO 0x1000 /* select microsecond resolution */ -#define ADJ_NANO 0x2000 /* select nanosecond resolution */ -#define ADJ_TICK 0x4000 /* tick value */ - -#ifdef __KERNEL__ #define ADJ_ADJTIME 0x8000 /* switch between adjtime/adjtimex modes */ #define ADJ_OFFSET_SINGLESHOT 0x0001 /* old-fashioned adjtime */ #define ADJ_OFFSET_READONLY 0x2000 /* read-only adjtime */ -#else -#define ADJ_OFFSET_SINGLESHOT 0x8001 /* old-fashioned adjtime */ -#define ADJ_OFFSET_SS_READ 0xa001 /* read-only adjtime */ -#endif - -/* NTP userland likes the MOD_ prefix better */ -#define MOD_OFFSET ADJ_OFFSET -#define MOD_FREQUENCY ADJ_FREQUENCY -#define MOD_MAXERROR ADJ_MAXERROR -#define MOD_ESTERROR ADJ_ESTERROR -#define MOD_STATUS ADJ_STATUS -#define MOD_TIMECONST ADJ_TIMECONST -#define MOD_TAI ADJ_TAI -#define MOD_MICRO ADJ_MICRO -#define MOD_NANO ADJ_NANO - - -/* - * Status codes (timex.status) - */ -#define STA_PLL 0x0001 /* enable PLL updates (rw) */ -#define STA_PPSFREQ 0x0002 /* enable PPS freq discipline (rw) */ -#define STA_PPSTIME 0x0004 /* enable PPS time discipline (rw) */ -#define STA_FLL 0x0008 /* select frequency-lock mode (rw) */ - -#define STA_INS 0x0010 /* insert leap (rw) */ -#define STA_DEL 0x0020 /* delete leap (rw) */ -#define STA_UNSYNC 0x0040 /* clock unsynchronized (rw) */ -#define STA_FREQHOLD 0x0080 /* hold frequency (rw) */ - -#define STA_PPSSIGNAL 0x0100 /* PPS signal present (ro) */ -#define STA_PPSJITTER 0x0200 /* PPS signal jitter exceeded (ro) */ -#define STA_PPSWANDER 0x0400 /* PPS signal wander exceeded (ro) */ -#define STA_PPSERROR 0x0800 /* PPS signal calibration error (ro) */ - -#define STA_CLOCKERR 0x1000 /* clock hardware fault (ro) */ -#define STA_NANO 0x2000 /* resolution (0 = us, 1 = ns) (ro) */ -#define STA_MODE 0x4000 /* mode (0 = PLL, 1 = FLL) (ro) */ -#define STA_CLK 0x8000 /* clock source (0 = A, 1 = B) (ro) */ - -/* read-only bits */ -#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \ - STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK) - -/* - * Clock states (time_state) - */ -#define TIME_OK 0 /* clock synchronized, no leap second */ -#define TIME_INS 1 /* insert leap second */ -#define TIME_DEL 2 /* delete leap second */ -#define TIME_OOP 3 /* leap second in progress */ -#define TIME_WAIT 4 /* leap second has occurred */ -#define TIME_ERROR 5 /* clock not synchronized */ -#define TIME_BAD TIME_ERROR /* bw compat */ - -#ifdef __KERNEL__ #include #include #include @@ -261,6 +152,4 @@ int read_current_timer(unsigned long *timer_val); /* The clock frequency of the i8253/i8254 PIT */ #define PIT_TICK_RATE 1193182ul -#endif /* KERNEL */ - #endif /* LINUX_TIMEX_H */ diff --git a/include/linux/tiocl.h b/include/linux/tiocl.h deleted file mode 100644 index 4756862c4ed4..000000000000 --- a/include/linux/tiocl.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _LINUX_TIOCL_H -#define _LINUX_TIOCL_H - -#define TIOCL_SETSEL 2 /* set a selection */ -#define TIOCL_SELCHAR 0 /* select characters */ -#define TIOCL_SELWORD 1 /* select whole words */ -#define TIOCL_SELLINE 2 /* select whole lines */ -#define TIOCL_SELPOINTER 3 /* show the pointer */ -#define TIOCL_SELCLEAR 4 /* clear visibility of selection */ -#define TIOCL_SELMOUSEREPORT 16 /* report beginning of selection */ -#define TIOCL_SELBUTTONMASK 15 /* button mask for report */ -/* selection extent */ -struct tiocl_selection { - unsigned short xs; /* X start */ - unsigned short ys; /* Y start */ - unsigned short xe; /* X end */ - unsigned short ye; /* Y end */ - unsigned short sel_mode; /* selection mode */ -}; - -#define TIOCL_PASTESEL 3 /* paste previous selection */ -#define TIOCL_UNBLANKSCREEN 4 /* unblank screen */ - -#define TIOCL_SELLOADLUT 5 - /* set characters to be considered alphabetic when selecting */ - /* u32[8] bit array, 4 bytes-aligned with type */ - -/* these two don't return a value: they write it back in the type */ -#define TIOCL_GETSHIFTSTATE 6 /* write shift state */ -#define TIOCL_GETMOUSEREPORTING 7 /* write whether mouse event are reported */ -#define TIOCL_SETVESABLANK 10 /* set vesa blanking mode */ -#define TIOCL_SETKMSGREDIRECT 11 /* restrict kernel messages to a vt */ -#define TIOCL_GETFGCONSOLE 12 /* get foreground vt */ -#define TIOCL_SCROLLCONSOLE 13 /* scroll console */ -#define TIOCL_BLANKSCREEN 14 /* keep screen blank even if a key is pressed */ -#define TIOCL_BLANKEDSCREEN 15 /* return which vt was blanked */ -#define TIOCL_GETKMSGREDIRECT 17 /* get the vt the kernel messages are restricted to */ - -#endif /* _LINUX_TIOCL_H */ diff --git a/include/linux/tipc.h b/include/linux/tipc.h deleted file mode 100644 index f2d90091cc20..000000000000 --- a/include/linux/tipc.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - * include/linux/tipc.h: Include file for TIPC socket interface - * - * Copyright (c) 2003-2006, Ericsson AB - * Copyright (c) 2005, 2010-2011, Wind River Systems - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _LINUX_TIPC_H_ -#define _LINUX_TIPC_H_ - -#include - -/* - * TIPC addressing primitives - */ - -struct tipc_portid { - __u32 ref; - __u32 node; -}; - -struct tipc_name { - __u32 type; - __u32 instance; -}; - -struct tipc_name_seq { - __u32 type; - __u32 lower; - __u32 upper; -}; - -static inline __u32 tipc_addr(unsigned int zone, - unsigned int cluster, - unsigned int node) -{ - return (zone << 24) | (cluster << 12) | node; -} - -static inline unsigned int tipc_zone(__u32 addr) -{ - return addr >> 24; -} - -static inline unsigned int tipc_cluster(__u32 addr) -{ - return (addr >> 12) & 0xfff; -} - -static inline unsigned int tipc_node(__u32 addr) -{ - return addr & 0xfff; -} - -/* - * Application-accessible port name types - */ - -#define TIPC_CFG_SRV 0 /* configuration service name type */ -#define TIPC_TOP_SRV 1 /* topology service name type */ -#define TIPC_RESERVED_TYPES 64 /* lowest user-publishable name type */ - -/* - * Publication scopes when binding port names and port name sequences - */ - -#define TIPC_ZONE_SCOPE 1 -#define TIPC_CLUSTER_SCOPE 2 -#define TIPC_NODE_SCOPE 3 - -/* - * Limiting values for messages - */ - -#define TIPC_MAX_USER_MSG_SIZE 66000U - -/* - * Message importance levels - */ - -#define TIPC_LOW_IMPORTANCE 0 -#define TIPC_MEDIUM_IMPORTANCE 1 -#define TIPC_HIGH_IMPORTANCE 2 -#define TIPC_CRITICAL_IMPORTANCE 3 - -/* - * Msg rejection/connection shutdown reasons - */ - -#define TIPC_OK 0 -#define TIPC_ERR_NO_NAME 1 -#define TIPC_ERR_NO_PORT 2 -#define TIPC_ERR_NO_NODE 3 -#define TIPC_ERR_OVERLOAD 4 -#define TIPC_CONN_SHUTDOWN 5 - -/* - * TIPC topology subscription service definitions - */ - -#define TIPC_SUB_PORTS 0x01 /* filter for port availability */ -#define TIPC_SUB_SERVICE 0x02 /* filter for service availability */ -#define TIPC_SUB_CANCEL 0x04 /* cancel a subscription */ - -#define TIPC_WAIT_FOREVER (~0) /* timeout for permanent subscription */ - -struct tipc_subscr { - struct tipc_name_seq seq; /* name sequence of interest */ - __u32 timeout; /* subscription duration (in ms) */ - __u32 filter; /* bitmask of filter options */ - char usr_handle[8]; /* available for subscriber use */ -}; - -#define TIPC_PUBLISHED 1 /* publication event */ -#define TIPC_WITHDRAWN 2 /* withdraw event */ -#define TIPC_SUBSCR_TIMEOUT 3 /* subscription timeout event */ - -struct tipc_event { - __u32 event; /* event type */ - __u32 found_lower; /* matching name seq instances */ - __u32 found_upper; /* " " " " */ - struct tipc_portid port; /* associated port */ - struct tipc_subscr s; /* associated subscription */ -}; - -/* - * Socket API - */ - -#ifndef AF_TIPC -#define AF_TIPC 30 -#endif - -#ifndef PF_TIPC -#define PF_TIPC AF_TIPC -#endif - -#ifndef SOL_TIPC -#define SOL_TIPC 271 -#endif - -#define TIPC_ADDR_NAMESEQ 1 -#define TIPC_ADDR_MCAST 1 -#define TIPC_ADDR_NAME 2 -#define TIPC_ADDR_ID 3 - -struct sockaddr_tipc { - unsigned short family; - unsigned char addrtype; - signed char scope; - union { - struct tipc_portid id; - struct tipc_name_seq nameseq; - struct { - struct tipc_name name; - __u32 domain; - } name; - } addr; -}; - -/* - * Ancillary data objects supported by recvmsg() - */ - -#define TIPC_ERRINFO 1 /* error info */ -#define TIPC_RETDATA 2 /* returned data */ -#define TIPC_DESTNAME 3 /* destination name */ - -/* - * TIPC-specific socket option values - */ - -#define TIPC_IMPORTANCE 127 /* Default: TIPC_LOW_IMPORTANCE */ -#define TIPC_SRC_DROPPABLE 128 /* Default: based on socket type */ -#define TIPC_DEST_DROPPABLE 129 /* Default: based on socket type */ -#define TIPC_CONN_TIMEOUT 130 /* Default: 8000 (ms) */ -#define TIPC_NODE_RECVQ_DEPTH 131 /* Default: none (read only) */ -#define TIPC_SOCK_RECVQ_DEPTH 132 /* Default: none (read only) */ - -#endif diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h deleted file mode 100644 index 0b1e3f218a36..000000000000 --- a/include/linux/tipc_config.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * include/linux/tipc_config.h: Include file for TIPC configuration interface - * - * Copyright (c) 2003-2006, Ericsson AB - * Copyright (c) 2005-2007, 2010-2011, Wind River Systems - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _LINUX_TIPC_CONFIG_H_ -#define _LINUX_TIPC_CONFIG_H_ - -#include -#include -#include - -#ifndef __KERNEL__ -#include /* for ntohs etc. */ -#endif - -/* - * Configuration - * - * All configuration management messaging involves sending a request message - * to the TIPC configuration service on a node, which sends a reply message - * back. (In the future multi-message replies may be supported.) - * - * Both request and reply messages consist of a transport header and payload. - * The transport header contains info about the desired operation; - * the payload consists of zero or more type/length/value (TLV) items - * which specify parameters or results for the operation. - * - * For many operations, the request and reply messages have a fixed number - * of TLVs (usually zero or one); however, some reply messages may return - * a variable number of TLVs. A failed request is denoted by the presence - * of an "error string" TLV in the reply message instead of the TLV(s) the - * reply should contain if the request succeeds. - */ - -/* - * Public commands: - * May be issued by any process. - * Accepted by own node, or by remote node only if remote management enabled. - */ - -#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ -#define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ -#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ -#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ -#define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ -#define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ -#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ -#define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ -#define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ - -/* - * Protected commands: - * May only be issued by "network administration capable" process. - * Accepted by own node, or by remote node only if remote management enabled - * and this node is zone manager. - */ - -#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ -#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ -#define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */ -#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */ -#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ -#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ -#define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */ -#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ -#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ - -#define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ -#define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ -#define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ -#define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ -#define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ -#define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ - -/* - * Private commands: - * May only be issued by "network administration capable" process. - * Accepted by own node only; cannot be used on a remote node. - */ - -#define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ -#define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ -#define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ -#define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */ -#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */ -#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ -#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ -#define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */ -#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ -#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ - -/* - * Reserved commands: - * May not be issued by any process. - * Used internally by TIPC. - */ - -#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ - -/* - * TLV types defined for TIPC - */ - -#define TIPC_TLV_NONE 0 /* no TLV present */ -#define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ -#define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ -#define TIPC_TLV_STRING 3 /* char[128] (max) */ -#define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ -#define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ - -#define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ -#define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting */ -#define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ -#define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ -#define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ -#define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ -#define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ -#define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ -#define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ -#define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ -#define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ - -/* - * Maximum sizes of TIPC bearer-related names (including terminating NUL) - */ - -#define TIPC_MAX_MEDIA_NAME 16 /* format = media */ -#define TIPC_MAX_IF_NAME 16 /* format = interface */ -#define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ -#define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ - -/* - * Link priority limits (min, default, max, media default) - */ - -#define TIPC_MIN_LINK_PRI 0 -#define TIPC_DEF_LINK_PRI 10 -#define TIPC_MAX_LINK_PRI 31 -#define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) - -/* - * Link tolerance limits (min, default, max), in ms - */ - -#define TIPC_MIN_LINK_TOL 50 -#define TIPC_DEF_LINK_TOL 1500 -#define TIPC_MAX_LINK_TOL 30000 - -#if (TIPC_MIN_LINK_TOL < 16) -#error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)" -#endif - -/* - * Link window limits (min, default, max), in packets - */ - -#define TIPC_MIN_LINK_WIN 16 -#define TIPC_DEF_LINK_WIN 50 -#define TIPC_MAX_LINK_WIN 150 - - -struct tipc_node_info { - __be32 addr; /* network address of node */ - __be32 up; /* 0=down, 1= up */ -}; - -struct tipc_link_info { - __be32 dest; /* network address of peer node */ - __be32 up; /* 0=down, 1=up */ - char str[TIPC_MAX_LINK_NAME]; /* link name */ -}; - -struct tipc_bearer_config { - __be32 priority; /* Range [1,31]. Override per link */ - __be32 disc_domain; /* describing desired nodes */ - char name[TIPC_MAX_BEARER_NAME]; -}; - -struct tipc_link_config { - __be32 value; - char name[TIPC_MAX_LINK_NAME]; -}; - -#define TIPC_NTQ_ALLTYPES 0x80000000 - -struct tipc_name_table_query { - __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ - __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ - __be32 lowbound; /* (i.e. displays all entries of name table) */ - __be32 upbound; -}; - -/* - * The error string TLV is a null-terminated string describing the cause - * of the request failure. To simplify error processing (and to save space) - * the first character of the string can be a special error code character - * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. - */ - -#define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ -#define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ -#define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ -#define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ -#define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ -#define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ - -/* - * A TLV consists of a descriptor, followed by the TLV value. - * TLV descriptor fields are stored in network byte order; - * TLV values must also be stored in network byte order (where applicable). - * TLV descriptors must be aligned to addresses which are multiple of 4, - * so up to 3 bytes of padding may exist at the end of the TLV value area. - * There must not be any padding between the TLV descriptor and its value. - */ - -struct tlv_desc { - __be16 tlv_len; /* TLV length (descriptor + value) */ - __be16 tlv_type; /* TLV identifier */ -}; - -#define TLV_ALIGNTO 4 - -#define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) -#define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) -#define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) -#define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) - -static inline int TLV_OK(const void *tlv, __u16 space) -{ - /* - * Would also like to check that "tlv" is a multiple of 4, - * but don't know how to do this in a portable way. - * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler - * won't allow binary "&" with a pointer. - * - Tried casting "tlv" to integer type, but causes warning about size - * mismatch when pointer is bigger than chosen type (int, long, ...). - */ - - return (space >= TLV_SPACE(0)) && - (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); -} - -static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) -{ - return TLV_OK(tlv, space) && - (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); -} - -static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) -{ - struct tlv_desc *tlv_ptr; - int tlv_len; - - tlv_len = TLV_LENGTH(len); - tlv_ptr = (struct tlv_desc *)tlv; - tlv_ptr->tlv_type = htons(type); - tlv_ptr->tlv_len = htons(tlv_len); - if (len && data) - memcpy(TLV_DATA(tlv_ptr), data, tlv_len); - return TLV_SPACE(len); -} - -/* - * A TLV list descriptor simplifies processing of messages - * containing multiple TLVs. - */ - -struct tlv_list_desc { - struct tlv_desc *tlv_ptr; /* ptr to current TLV */ - __u32 tlv_space; /* # bytes from curr TLV to list end */ -}; - -static inline void TLV_LIST_INIT(struct tlv_list_desc *list, - void *data, __u32 space) -{ - list->tlv_ptr = (struct tlv_desc *)data; - list->tlv_space = space; -} - -static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) -{ - return (list->tlv_space == 0); -} - -static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) -{ - return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); -} - -static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) -{ - return TLV_DATA(list->tlv_ptr); -} - -static inline void TLV_LIST_STEP(struct tlv_list_desc *list) -{ - __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); - - list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); - list->tlv_space -= tlv_space; -} - -/* - * Configuration messages exchanged via NETLINK_GENERIC use the following - * family id, name, version and command. - */ -#define TIPC_GENL_NAME "TIPC" -#define TIPC_GENL_VERSION 0x1 -#define TIPC_GENL_CMD 0x1 - -/* - * TIPC specific header used in NETLINK_GENERIC requests. - */ -struct tipc_genlmsghdr { - __u32 dest; /* Destination address */ - __u16 cmd; /* Command */ - __u16 reserved; /* Unused */ -}; - -#define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) - -/* - * Configuration messages exchanged via TIPC sockets use the TIPC configuration - * message header, which is defined below. This structure is analogous - * to the Netlink message header, but fields are stored in network byte order - * and no padding is permitted between the header and the message data - * that follows. - */ - -struct tipc_cfg_msg_hdr { - __be32 tcm_len; /* Message length (including header) */ - __be16 tcm_type; /* Command type */ - __be16 tcm_flags; /* Additional flags */ - char tcm_reserved[8]; /* Unused */ -}; - -#define TCM_F_REQUEST 0x1 /* Flag: Request message */ -#define TCM_F_MORE 0x2 /* Flag: Message to be continued */ - -#define TCM_ALIGN(datalen) (((datalen)+3) & ~3) -#define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) -#define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) -#define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) - -static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, - void *data, __u16 data_len) -{ - struct tipc_cfg_msg_hdr *tcm_hdr; - int msg_len; - - msg_len = TCM_LENGTH(data_len); - tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; - tcm_hdr->tcm_len = htonl(msg_len); - tcm_hdr->tcm_type = htons(cmd); - tcm_hdr->tcm_flags = htons(flags); - if (data_len && data) - memcpy(TCM_DATA(msg), data, data_len); - return TCM_SPACE(data_len); -} - -#endif diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h index 772dedbc3a22..915c3bb164ac 100644 --- a/include/linux/toshiba.h +++ b/include/linux/toshiba.h @@ -16,25 +16,10 @@ * General Public License for more details. * */ - #ifndef _LINUX_TOSHIBA_H #define _LINUX_TOSHIBA_H -#define TOSH_PROC "/proc/toshiba" -#define TOSH_DEVICE "/dev/toshiba" -#define TOSH_SMM _IOWR('t', 0x90, int) /* broken: meant 24 bytes */ - -typedef struct { - unsigned int eax; - unsigned int ebx __attribute__ ((packed)); - unsigned int ecx __attribute__ ((packed)); - unsigned int edx __attribute__ ((packed)); - unsigned int esi __attribute__ ((packed)); - unsigned int edi __attribute__ ((packed)); -} SMMRegisters; +#include -#ifdef __KERNEL__ int tosh_smm(SMMRegisters *regs); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/tty.h b/include/linux/tty.h index 4f6c59a5fb79..f0b4eb47297c 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -1,41 +1,6 @@ #ifndef _LINUX_TTY_H #define _LINUX_TTY_H -/* - * 'tty.h' defines some structures used by tty_io.c and some defines. - */ - -#define NR_LDISCS 30 - -/* line disciplines */ -#define N_TTY 0 -#define N_SLIP 1 -#define N_MOUSE 2 -#define N_PPP 3 -#define N_STRIP 4 -#define N_AX25 5 -#define N_X25 6 /* X.25 async */ -#define N_6PACK 7 -#define N_MASC 8 /* Reserved for Mobitex module */ -#define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ -#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ -#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ - /* cards about SMS messages */ -#define N_HDLC 13 /* synchronous HDLC */ -#define N_SYNC_PPP 14 /* synchronous PPP */ -#define N_HCI 15 /* Bluetooth HCI UART */ -#define N_GIGASET_M101 16 /* Siemens Gigaset M101 serial DECT adapter */ -#define N_SLCAN 17 /* Serial / USB serial CAN Adaptors */ -#define N_PPS 18 /* Pulse per Second */ -#define N_V253 19 /* Codec control over voice modem */ -#define N_CAIF 20 /* CAIF protocol for talking to modems */ -#define N_GSM0710 21 /* GSM 0710 Mux */ -#define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ -#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ -#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ - -#ifdef __KERNEL__ #include #include #include @@ -44,6 +9,7 @@ #include #include #include +#include @@ -694,5 +660,4 @@ do { \ } while (0) -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h deleted file mode 100644 index eefcb483a2c0..000000000000 --- a/include/linux/tty_flags.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _LINUX_TTY_FLAGS_H -#define _LINUX_TTY_FLAGS_H - -/* - * Definitions for async_struct (and serial_struct) flags field also - * shared by the tty_port flags structures. - * - * Define ASYNCB_* for convenient use with {test,set,clear}_bit. - */ -#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes - * on the callout port */ -#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */ -#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */ -#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */ -#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */ -#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */ -#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */ -#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during - * autoconfiguration */ -#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */ -#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */ -#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */ -#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */ -#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */ -#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */ -#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety - * checks. Note: can be dangerous! */ -#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */ -#define ASYNCB_LAST_USER 15 - -/* Internal flags used only by kernel */ -#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */ -#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */ -#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */ -#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */ -#define ASYNCB_CLOSING 27 /* Serial port is closing */ -#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */ -#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */ -#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */ -#define ASYNCB_CONS_FLOW 23 /* flow control for console */ -#define ASYNCB_FIRST_KERNEL 22 - -#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY) -#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED) -#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT) -#define ASYNC_SAK (1U << ASYNCB_SAK) -#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS) -#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI) -#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI) -#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST) -#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ) -#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT) -#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT) -#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP) -#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD) -#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI) -#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY) -#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART) -#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE) - -#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1) -#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \ - ASYNC_LOW_LATENCY) -#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI) -#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI) -#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI) - -#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED) -#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE) -#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF) -#define ASYNC_CLOSING (1U << ASYNCB_CLOSING) -#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW) -#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD) -#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ) -#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW) -#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1)) - -#endif diff --git a/include/linux/types.h b/include/linux/types.h index bf0dd7524b2a..1cc0e4b9a048 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -1,22 +1,13 @@ #ifndef _LINUX_TYPES_H #define _LINUX_TYPES_H -#include +#define __EXPORTED_HEADERS__ +#include #ifndef __ASSEMBLY__ -#ifdef __KERNEL__ #define DECLARE_BITMAP(name,bits) \ unsigned long name[BITS_TO_LONGS(bits)] -#else -#ifndef __EXPORTED_HEADERS__ -#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders" -#endif /* __EXPORTED_HEADERS__ */ -#endif - -#include - -#ifdef __KERNEL__ typedef __u32 __kernel_dev_t; @@ -157,48 +148,12 @@ typedef u64 dma_addr_t; typedef u32 dma_addr_t; #endif /* dma_addr_t */ -#endif /* __KERNEL__ */ - -/* - * Below are truly Linux-specific types that should never collide with - * any application/library that wants linux/types.h. - */ - #ifdef __CHECKER__ -#define __bitwise__ __attribute__((bitwise)) #else -#define __bitwise__ #endif #ifdef __CHECK_ENDIAN__ -#define __bitwise __bitwise__ #else -#define __bitwise #endif - -typedef __u16 __bitwise __le16; -typedef __u16 __bitwise __be16; -typedef __u32 __bitwise __le32; -typedef __u32 __bitwise __be32; -typedef __u64 __bitwise __le64; -typedef __u64 __bitwise __be64; - -typedef __u16 __bitwise __sum16; -typedef __u32 __bitwise __wsum; - -/* - * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid - * common 32/64-bit compat problems. - * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other - * architectures) and to 8-byte boundaries on 64-bit architectures. The new - * aligned_64 type enforces 8-byte alignment so that structs containing - * aligned_64 values have the same alignment on 32-bit and 64-bit architectures. - * No conversions are necessary between 32-bit user-space and a 64-bit kernel. - */ -#define __aligned_u64 __u64 __attribute__((aligned(8))) -#define __aligned_be64 __be64 __attribute__((aligned(8))) -#define __aligned_le64 __le64 __attribute__((aligned(8))) - -#ifdef __KERNEL__ typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; @@ -256,6 +211,5 @@ struct callback_head { }; #define rcu_head callback_head -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _LINUX_TYPES_H */ diff --git a/include/linux/udf_fs_i.h b/include/linux/udf_fs_i.h deleted file mode 100644 index 3536965913b0..000000000000 --- a/include/linux/udf_fs_i.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * udf_fs_i.h - * - * This file is intended for the Linux kernel/module. - * - * COPYRIGHT - * This file is distributed under the terms of the GNU General Public - * License (GPL). Copies of the GPL can be obtained from: - * ftp://prep.ai.mit.edu/pub/gnu/GPL - * Each contributing author retains all rights to their own work. - */ -#ifndef _UDF_FS_I_H -#define _UDF_FS_I_H 1 - -/* exported IOCTLs, we have 'l', 0x40-0x7f */ -#define UDF_GETEASIZE _IOR('l', 0x40, int) -#define UDF_GETEABLOCK _IOR('l', 0x41, void *) -#define UDF_GETVOLIDENT _IOR('l', 0x42, void *) -#define UDF_RELOCATE_BLOCKS _IOWR('l', 0x43, long) - -#endif /* _UDF_FS_I_H */ diff --git a/include/linux/udp.h b/include/linux/udp.h index 03f72a2ba028..0b67d7793520 100644 --- a/include/linux/udp.h +++ b/include/linux/udp.h @@ -17,28 +17,10 @@ #ifndef _LINUX_UDP_H #define _LINUX_UDP_H -#include - -struct udphdr { - __be16 source; - __be16 dest; - __be16 len; - __sum16 check; -}; - -/* UDP socket options */ -#define UDP_CORK 1 /* Never send partially complete segments */ -#define UDP_ENCAP 100 /* Set the socket to accept encapsulated packets */ - -/* UDP encapsulation types */ -#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */ -#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */ -#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */ - -#ifdef __KERNEL__ #include #include #include +#include static inline struct udphdr *udp_hdr(const struct sk_buff *skb) { @@ -96,6 +78,4 @@ static inline struct udp_sock *udp_sk(const struct sock *sk) #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag) -#endif - #endif /* _LINUX_UDP_H */ diff --git a/include/linux/uhid.h b/include/linux/uhid.h deleted file mode 100644 index 9c6974f16966..000000000000 --- a/include/linux/uhid.h +++ /dev/null @@ -1,104 +0,0 @@ -#ifndef __UHID_H_ -#define __UHID_H_ - -/* - * User-space I/O driver support for HID subsystem - * Copyright (c) 2012 David Herrmann - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -/* - * Public header for user-space communication. We try to keep every structure - * aligned but to be safe we also use __attribute__((__packed__)). Therefore, - * the communication should be ABI compatible even between architectures. - */ - -#include -#include - -enum uhid_event_type { - UHID_CREATE, - UHID_DESTROY, - UHID_START, - UHID_STOP, - UHID_OPEN, - UHID_CLOSE, - UHID_OUTPUT, - UHID_OUTPUT_EV, - UHID_INPUT, - UHID_FEATURE, - UHID_FEATURE_ANSWER, -}; - -struct uhid_create_req { - __u8 name[128]; - __u8 phys[64]; - __u8 uniq[64]; - __u8 __user *rd_data; - __u16 rd_size; - - __u16 bus; - __u32 vendor; - __u32 product; - __u32 version; - __u32 country; -} __attribute__((__packed__)); - -#define UHID_DATA_MAX 4096 - -enum uhid_report_type { - UHID_FEATURE_REPORT, - UHID_OUTPUT_REPORT, - UHID_INPUT_REPORT, -}; - -struct uhid_input_req { - __u8 data[UHID_DATA_MAX]; - __u16 size; -} __attribute__((__packed__)); - -struct uhid_output_req { - __u8 data[UHID_DATA_MAX]; - __u16 size; - __u8 rtype; -} __attribute__((__packed__)); - -struct uhid_output_ev_req { - __u16 type; - __u16 code; - __s32 value; -} __attribute__((__packed__)); - -struct uhid_feature_req { - __u32 id; - __u8 rnum; - __u8 rtype; -} __attribute__((__packed__)); - -struct uhid_feature_answer_req { - __u32 id; - __u16 err; - __u16 size; - __u8 data[UHID_DATA_MAX]; -}; - -struct uhid_event { - __u32 type; - - union { - struct uhid_create_req create; - struct uhid_input_req input; - struct uhid_output_req output; - struct uhid_output_ev_req output_ev; - struct uhid_feature_req feature; - struct uhid_feature_answer_req feature_answer; - } u; -} __attribute__((__packed__)); - -#endif /* __UHID_H_ */ diff --git a/include/linux/uinput.h b/include/linux/uinput.h index c454bbe39ee7..0a4487d3fb1e 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -1,5 +1,3 @@ -#ifndef __UINPUT_H_ -#define __UINPUT_H_ /* * User level driver support for input subsystem * @@ -31,13 +29,11 @@ * 0.1 20/06/2002 * - first public version */ +#ifndef __UINPUT_H_ +#define __UINPUT_H_ -#include -#include - -#define UINPUT_VERSION 3 +#include -#ifdef __KERNEL__ #define UINPUT_NAME "uinput" #define UINPUT_BUFFER_SIZE 16 #define UINPUT_NUM_REQUESTS 16 @@ -75,103 +71,4 @@ struct uinput_device { wait_queue_head_t requests_waitq; spinlock_t requests_lock; }; -#endif /* __KERNEL__ */ - -struct uinput_ff_upload { - __u32 request_id; - __s32 retval; - struct ff_effect effect; - struct ff_effect old; -}; - -struct uinput_ff_erase { - __u32 request_id; - __s32 retval; - __u32 effect_id; -}; - -/* ioctl */ -#define UINPUT_IOCTL_BASE 'U' -#define UI_DEV_CREATE _IO(UINPUT_IOCTL_BASE, 1) -#define UI_DEV_DESTROY _IO(UINPUT_IOCTL_BASE, 2) - -#define UI_SET_EVBIT _IOW(UINPUT_IOCTL_BASE, 100, int) -#define UI_SET_KEYBIT _IOW(UINPUT_IOCTL_BASE, 101, int) -#define UI_SET_RELBIT _IOW(UINPUT_IOCTL_BASE, 102, int) -#define UI_SET_ABSBIT _IOW(UINPUT_IOCTL_BASE, 103, int) -#define UI_SET_MSCBIT _IOW(UINPUT_IOCTL_BASE, 104, int) -#define UI_SET_LEDBIT _IOW(UINPUT_IOCTL_BASE, 105, int) -#define UI_SET_SNDBIT _IOW(UINPUT_IOCTL_BASE, 106, int) -#define UI_SET_FFBIT _IOW(UINPUT_IOCTL_BASE, 107, int) -#define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*) -#define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int) -#define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int) - -#define UI_BEGIN_FF_UPLOAD _IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload) -#define UI_END_FF_UPLOAD _IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload) -#define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) -#define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) - -/* - * To write a force-feedback-capable driver, the upload_effect - * and erase_effect callbacks in input_dev must be implemented. - * The uinput driver will generate a fake input event when one of - * these callbacks are invoked. The userspace code then uses - * ioctls to retrieve additional parameters and send the return code. - * The callback blocks until this return code is sent. - * - * The described callback mechanism is only used if ff_effects_max - * is set. - * - * To implement upload_effect(): - * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD. - * A request ID will be given in 'value'. - * 2. Allocate a uinput_ff_upload struct, fill in request_id with - * the 'value' from the EV_UINPUT event. - * 3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the - * uinput_ff_upload struct. It will be filled in with the - * ff_effects passed to upload_effect(). - * 4. Perform the effect upload, and place a return code back into - the uinput_ff_upload struct. - * 5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the - * uinput_ff_upload_effect struct. This will complete execution - * of our upload_effect() handler. - * - * To implement erase_effect(): - * 1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE. - * A request ID will be given in 'value'. - * 2. Allocate a uinput_ff_erase struct, fill in request_id with - * the 'value' from the EV_UINPUT event. - * 3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the - * uinput_ff_erase struct. It will be filled in with the - * effect ID passed to erase_effect(). - * 4. Perform the effect erasure, and place a return code back - * into the uinput_ff_erase struct. - * 5. Issue a UI_END_FF_ERASE ioctl, also giving it the - * uinput_ff_erase_effect struct. This will complete execution - * of our erase_effect() handler. - */ - -/* - * This is the new event type, used only by uinput. - * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value' - * is the unique request ID. This number was picked - * arbitrarily, above EV_MAX (since the input system - * never sees it) but in the range of a 16-bit int. - */ -#define EV_UINPUT 0x0101 -#define UI_FF_UPLOAD 1 -#define UI_FF_ERASE 2 - -#define UINPUT_MAX_NAME_SIZE 80 -struct uinput_user_dev { - char name[UINPUT_MAX_NAME_SIZE]; - struct input_id id; - __u32 ff_effects_max; - __s32 absmax[ABS_CNT]; - __s32 absmin[ABS_CNT]; - __s32 absfuzz[ABS_CNT]; - __s32 absflat[ABS_CNT]; -}; #endif /* __UINPUT_H_ */ - diff --git a/include/linux/uio.h b/include/linux/uio.h index 98c114323a8b..629aaf51f30b 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -1,9 +1,3 @@ -#ifndef __LINUX_UIO_H -#define __LINUX_UIO_H - -#include -#include - /* * Berkeley style UIO structures - Alan Cox 1994. * @@ -12,21 +6,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#ifndef __LINUX_UIO_H +#define __LINUX_UIO_H -struct iovec -{ - void __user *iov_base; /* BSD uses caddr_t (1003.1g requires void *) */ - __kernel_size_t iov_len; /* Must be size_t (1003.1g) */ -}; - -/* - * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1) - */ - -#define UIO_FASTIOV 8 -#define UIO_MAXIOV 1024 +#include -#ifdef __KERNEL__ struct kvec { void *iov_base; /* and that should *never* hold a userland pointer */ @@ -52,5 +36,3 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); #endif - -#endif diff --git a/include/linux/ultrasound.h b/include/linux/ultrasound.h deleted file mode 100644 index 71339dc531c5..000000000000 --- a/include/linux/ultrasound.h +++ /dev/null @@ -1,103 +0,0 @@ -#ifndef _ULTRASOUND_H_ -#define _ULTRASOUND_H_ -/* - * ultrasound.h - Macros for programming the Gravis Ultrasound - * These macros are extremely device dependent - * and not portable. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - - -/* - * Private events for Gravis Ultrasound (GUS) - * - * Format: - * byte 0 - SEQ_PRIVATE (0xfe) - * byte 1 - Synthesizer device number (0-N) - * byte 2 - Command (see below) - * byte 3 - Voice number (0-31) - * bytes 4 and 5 - parameter P1 (unsigned short) - * bytes 6 and 7 - parameter P2 (unsigned short) - * - * Commands: - * Each command affects one voice defined in byte 3. - * Unused parameters (P1 and/or P2 *MUST* be initialized to zero). - * _GUS_NUMVOICES - Sets max. number of concurrent voices (P1=14-31, default 16) - * _GUS_VOICESAMPLE- ************ OBSOLETE ************* - * _GUS_VOICEON - Starts voice (P1=voice mode) - * _GUS_VOICEOFF - Stops voice (no parameters) - * _GUS_VOICEFADE - Stops the voice smoothly. - * _GUS_VOICEMODE - Alters the voice mode, don't start or stop voice (P1=voice mode) - * _GUS_VOICEBALA - Sets voice balance (P1, 0=left, 7=middle and 15=right, default 7) - * _GUS_VOICEFREQ - Sets voice (sample) playback frequency (P1=Hz) - * _GUS_VOICEVOL - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off) - * _GUS_VOICEVOL2 - Sets voice volume (P1=volume, 0xfff=max, 0xeff=half, 0x000=off) - * (Like GUS_VOICEVOL but doesn't change the hw - * volume. It just updates volume in the voice table). - * - * _GUS_RAMPRANGE - Sets limits for volume ramping (P1=low volume, P2=high volume) - * _GUS_RAMPRATE - Sets the speed for volume ramping (P1=scale, P2=rate) - * _GUS_RAMPMODE - Sets the volume ramping mode (P1=ramping mode) - * _GUS_RAMPON - Starts volume ramping (no parameters) - * _GUS_RAMPOFF - Stops volume ramping (no parameters) - * _GUS_VOLUME_SCALE - Changes the volume calculation constants - * for all voices. - */ - -#define _GUS_NUMVOICES 0x00 -#define _GUS_VOICESAMPLE 0x01 /* OBSOLETE */ -#define _GUS_VOICEON 0x02 -#define _GUS_VOICEOFF 0x03 -#define _GUS_VOICEMODE 0x04 -#define _GUS_VOICEBALA 0x05 -#define _GUS_VOICEFREQ 0x06 -#define _GUS_VOICEVOL 0x07 -#define _GUS_RAMPRANGE 0x08 -#define _GUS_RAMPRATE 0x09 -#define _GUS_RAMPMODE 0x0a -#define _GUS_RAMPON 0x0b -#define _GUS_RAMPOFF 0x0c -#define _GUS_VOICEFADE 0x0d -#define _GUS_VOLUME_SCALE 0x0e -#define _GUS_VOICEVOL2 0x0f -#define _GUS_VOICE_POS 0x10 - -/* - * GUS API macros - */ - -#define _GUS_CMD(chn, voice, cmd, p1, p2) \ - {_SEQ_NEEDBUF(8); _seqbuf[_seqbufptr] = SEQ_PRIVATE;\ - _seqbuf[_seqbufptr+1] = (chn); _seqbuf[_seqbufptr+2] = cmd;\ - _seqbuf[_seqbufptr+3] = voice;\ - *(unsigned short*)&_seqbuf[_seqbufptr+4] = p1;\ - *(unsigned short*)&_seqbuf[_seqbufptr+6] = p2;\ - _SEQ_ADVBUF(8);} - -#define GUS_NUMVOICES(chn, p1) _GUS_CMD(chn, 0, _GUS_NUMVOICES, (p1), 0) -#define GUS_VOICESAMPLE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICESAMPLE, (p1), 0) /* OBSOLETE */ -#define GUS_VOICEON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEON, (p1), 0) -#define GUS_VOICEOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEOFF, 0, 0) -#define GUS_VOICEFADE(chn, voice) _GUS_CMD(chn, voice, _GUS_VOICEFADE, 0, 0) -#define GUS_VOICEMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEMODE, (p1), 0) -#define GUS_VOICEBALA(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEBALA, (p1), 0) -#define GUS_VOICEFREQ(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICEFREQ, \ - (p) & 0xffff, ((p) >> 16) & 0xffff) -#define GUS_VOICEVOL(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL, (p1), 0) -#define GUS_VOICEVOL2(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_VOICEVOL2, (p1), 0) -#define GUS_RAMPRANGE(chn, voice, low, high) _GUS_CMD(chn, voice, _GUS_RAMPRANGE, (low), (high)) -#define GUS_RAMPRATE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_RAMPRATE, (p1), (p2)) -#define GUS_RAMPMODE(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPMODE, (p1), 0) -#define GUS_RAMPON(chn, voice, p1) _GUS_CMD(chn, voice, _GUS_RAMPON, (p1), 0) -#define GUS_RAMPOFF(chn, voice) _GUS_CMD(chn, voice, _GUS_RAMPOFF, 0, 0) -#define GUS_VOLUME_SCALE(chn, voice, p1, p2) _GUS_CMD(chn, voice, _GUS_VOLUME_SCALE, (p1), (p2)) -#define GUS_VOICE_POS(chn, voice, p) _GUS_CMD(chn, voice, _GUS_VOICE_POS, \ - (p) & 0xffff, ((p) >> 16) & 0xffff) - -#endif diff --git a/include/linux/un.h b/include/linux/un.h deleted file mode 100644 index 3ed3e46c1b1f..000000000000 --- a/include/linux/un.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _LINUX_UN_H -#define _LINUX_UN_H - -#include - -#define UNIX_PATH_MAX 108 - -struct sockaddr_un { - __kernel_sa_family_t sun_family; /* AF_UNIX */ - char sun_path[UNIX_PATH_MAX]; /* pathname */ -}; - -#endif /* _LINUX_UN_H */ diff --git a/include/linux/unistd.h b/include/linux/unistd.h deleted file mode 100644 index aa8d5b5e2e3e..000000000000 --- a/include/linux/unistd.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _LINUX_UNISTD_H_ -#define _LINUX_UNISTD_H_ - -/* - * Include machine specific syscall numbers - */ -#include - -#endif /* _LINUX_UNISTD_H_ */ diff --git a/include/linux/unix_diag.h b/include/linux/unix_diag.h deleted file mode 100644 index b1d2bf16b33c..000000000000 --- a/include/linux/unix_diag.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef __UNIX_DIAG_H__ -#define __UNIX_DIAG_H__ - -#include - -struct unix_diag_req { - __u8 sdiag_family; - __u8 sdiag_protocol; - __u16 pad; - __u32 udiag_states; - __u32 udiag_ino; - __u32 udiag_show; - __u32 udiag_cookie[2]; -}; - -#define UDIAG_SHOW_NAME 0x00000001 /* show name (not path) */ -#define UDIAG_SHOW_VFS 0x00000002 /* show VFS inode info */ -#define UDIAG_SHOW_PEER 0x00000004 /* show peer socket info */ -#define UDIAG_SHOW_ICONS 0x00000008 /* show pending connections */ -#define UDIAG_SHOW_RQLEN 0x00000010 /* show skb receive queue len */ -#define UDIAG_SHOW_MEMINFO 0x00000020 /* show memory info of a socket */ - -struct unix_diag_msg { - __u8 udiag_family; - __u8 udiag_type; - __u8 udiag_state; - __u8 pad; - - __u32 udiag_ino; - __u32 udiag_cookie[2]; -}; - -enum { - UNIX_DIAG_NAME, - UNIX_DIAG_VFS, - UNIX_DIAG_PEER, - UNIX_DIAG_ICONS, - UNIX_DIAG_RQLEN, - UNIX_DIAG_MEMINFO, - - UNIX_DIAG_MAX, -}; - -struct unix_diag_vfs { - __u32 udiag_vfs_ino; - __u32 udiag_vfs_dev; -}; - -struct unix_diag_rqlen { - __u32 udiag_rqueue; - __u32 udiag_wqueue; -}; - -#endif diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 4abe28e41cbc..04a26285416c 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -25,126 +25,11 @@ */ /*****************************************************************************/ - #ifndef _LINUX_USBDEVICE_FS_H #define _LINUX_USBDEVICE_FS_H -#include -#include - -/* --------------------------------------------------------------------- */ - -/* usbdevfs ioctl codes */ - -struct usbdevfs_ctrltransfer { - __u8 bRequestType; - __u8 bRequest; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - __u32 timeout; /* in milliseconds */ - void __user *data; -}; - -struct usbdevfs_bulktransfer { - unsigned int ep; - unsigned int len; - unsigned int timeout; /* in milliseconds */ - void __user *data; -}; - -struct usbdevfs_setinterface { - unsigned int interface; - unsigned int altsetting; -}; - -struct usbdevfs_disconnectsignal { - unsigned int signr; - void __user *context; -}; - -#define USBDEVFS_MAXDRIVERNAME 255 - -struct usbdevfs_getdriver { - unsigned int interface; - char driver[USBDEVFS_MAXDRIVERNAME + 1]; -}; - -struct usbdevfs_connectinfo { - unsigned int devnum; - unsigned char slow; -}; - -#define USBDEVFS_URB_SHORT_NOT_OK 0x01 -#define USBDEVFS_URB_ISO_ASAP 0x02 -#define USBDEVFS_URB_BULK_CONTINUATION 0x04 -#define USBDEVFS_URB_NO_FSBR 0x20 -#define USBDEVFS_URB_ZERO_PACKET 0x40 -#define USBDEVFS_URB_NO_INTERRUPT 0x80 - -#define USBDEVFS_URB_TYPE_ISO 0 -#define USBDEVFS_URB_TYPE_INTERRUPT 1 -#define USBDEVFS_URB_TYPE_CONTROL 2 -#define USBDEVFS_URB_TYPE_BULK 3 +#include -struct usbdevfs_iso_packet_desc { - unsigned int length; - unsigned int actual_length; - unsigned int status; -}; - -struct usbdevfs_urb { - unsigned char type; - unsigned char endpoint; - int status; - unsigned int flags; - void __user *buffer; - int buffer_length; - int actual_length; - int start_frame; - int number_of_packets; - int error_count; - unsigned int signr; /* signal to be sent on completion, - or 0 if none should be sent. */ - void __user *usercontext; - struct usbdevfs_iso_packet_desc iso_frame_desc[0]; -}; - -/* ioctls for talking directly to drivers */ -struct usbdevfs_ioctl { - int ifno; /* interface 0..N ; negative numbers reserved */ - int ioctl_code; /* MUST encode size + direction of data so the - * macros in give correct values */ - void __user *data; /* param buffer (in, or out) */ -}; - -/* You can do most things with hubs just through control messages, - * except find out what device connects to what port. */ -struct usbdevfs_hub_portinfo { - char nports; /* number of downstream ports in this hub */ - char port [127]; /* e.g. port 3 connects to device 27 */ -}; - -/* Device capability flags */ -#define USBDEVFS_CAP_ZERO_PACKET 0x01 -#define USBDEVFS_CAP_BULK_CONTINUATION 0x02 -#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM 0x04 -#define USBDEVFS_CAP_BULK_SCATTER_GATHER 0x08 - -/* USBDEVFS_DISCONNECT_CLAIM flags & struct */ - -/* disconnect-and-claim if the driver matches the driver field */ -#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER 0x01 -/* disconnect-and-claim except when the driver matches the driver field */ -#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER 0x02 - -struct usbdevfs_disconnect_claim { - unsigned int interface; - unsigned int flags; - char driver[USBDEVFS_MAXDRIVERNAME + 1]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include @@ -192,38 +77,4 @@ struct usbdevfs_ioctl32 { compat_caddr_t data; }; #endif -#endif /* __KERNEL__ */ - -#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) -#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) -#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer) -#define USBDEVFS_BULK32 _IOWR('U', 2, struct usbdevfs_bulktransfer32) -#define USBDEVFS_RESETEP _IOR('U', 3, unsigned int) -#define USBDEVFS_SETINTERFACE _IOR('U', 4, struct usbdevfs_setinterface) -#define USBDEVFS_SETCONFIGURATION _IOR('U', 5, unsigned int) -#define USBDEVFS_GETDRIVER _IOW('U', 8, struct usbdevfs_getdriver) -#define USBDEVFS_SUBMITURB _IOR('U', 10, struct usbdevfs_urb) -#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32) -#define USBDEVFS_DISCARDURB _IO('U', 11) -#define USBDEVFS_REAPURB _IOW('U', 12, void *) -#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32) -#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *) -#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32) -#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal) -#define USBDEVFS_DISCSIGNAL32 _IOR('U', 14, struct usbdevfs_disconnectsignal32) -#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int) -#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int) -#define USBDEVFS_CONNECTINFO _IOW('U', 17, struct usbdevfs_connectinfo) -#define USBDEVFS_IOCTL _IOWR('U', 18, struct usbdevfs_ioctl) -#define USBDEVFS_IOCTL32 _IOWR('U', 18, struct usbdevfs_ioctl32) -#define USBDEVFS_HUB_PORTINFO _IOR('U', 19, struct usbdevfs_hub_portinfo) -#define USBDEVFS_RESET _IO('U', 20) -#define USBDEVFS_CLEAR_HALT _IOR('U', 21, unsigned int) -#define USBDEVFS_DISCONNECT _IO('U', 22) -#define USBDEVFS_CONNECT _IO('U', 23) -#define USBDEVFS_CLAIM_PORT _IOR('U', 24, unsigned int) -#define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) -#define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) -#define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) - #endif /* _LINUX_USBDEVICE_FS_H */ diff --git a/include/linux/utime.h b/include/linux/utime.h deleted file mode 100644 index 5cdf673afbdb..000000000000 --- a/include/linux/utime.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _LINUX_UTIME_H -#define _LINUX_UTIME_H - -#include - -struct utimbuf { - __kernel_time_t actime; - __kernel_time_t modtime; -}; - -#endif diff --git a/include/linux/utsname.h b/include/linux/utsname.h index c714ed75eae2..2b345206722a 100644 --- a/include/linux/utsname.h +++ b/include/linux/utsname.h @@ -1,41 +1,12 @@ #ifndef _LINUX_UTSNAME_H #define _LINUX_UTSNAME_H -#define __OLD_UTS_LEN 8 - -struct oldold_utsname { - char sysname[9]; - char nodename[9]; - char release[9]; - char version[9]; - char machine[9]; -}; - -#define __NEW_UTS_LEN 64 - -struct old_utsname { - char sysname[65]; - char nodename[65]; - char release[65]; - char version[65]; - char machine[65]; -}; - -struct new_utsname { - char sysname[__NEW_UTS_LEN + 1]; - char nodename[__NEW_UTS_LEN + 1]; - char release[__NEW_UTS_LEN + 1]; - char version[__NEW_UTS_LEN + 1]; - char machine[__NEW_UTS_LEN + 1]; - char domainname[__NEW_UTS_LEN + 1]; -}; - -#ifdef __KERNEL__ #include #include #include #include +#include enum uts_proc { UTS_PROC_OSTYPE, @@ -108,6 +79,4 @@ static inline struct new_utsname *init_utsname(void) extern struct rw_semaphore uts_sem; -#endif /* __KERNEL__ */ - #endif /* _LINUX_UTSNAME_H */ diff --git a/include/linux/uuid.h b/include/linux/uuid.h index f86c37bfd4a0..6df2509033d7 100644 --- a/include/linux/uuid.h +++ b/include/linux/uuid.h @@ -17,44 +17,11 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #ifndef _LINUX_UUID_H_ #define _LINUX_UUID_H_ -#include -#include - -typedef struct { - __u8 b[16]; -} uuid_le; - -typedef struct { - __u8 b[16]; -} uuid_be; - -#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_le) \ -{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \ - (b) & 0xff, ((b) >> 8) & 0xff, \ - (c) & 0xff, ((c) >> 8) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) +#include -#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \ -((uuid_be) \ -{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \ - ((b) >> 8) & 0xff, (b) & 0xff, \ - ((c) >> 8) & 0xff, (c) & 0xff, \ - (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }}) - -#define NULL_UUID_LE \ - UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#define NULL_UUID_BE \ - UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \ - 0x00, 0x00, 0x00, 0x00) - -#ifdef __KERNEL__ static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2) { @@ -69,6 +36,4 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2) extern void uuid_le_gen(uuid_le *u); extern void uuid_be_gen(uuid_be *u); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h deleted file mode 100644 index 3b081862b9e8..000000000000 --- a/include/linux/uvcvideo.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __LINUX_UVCVIDEO_H_ -#define __LINUX_UVCVIDEO_H_ - -#include -#include - -/* - * Dynamic controls - */ - -/* Data types for UVC control data */ -#define UVC_CTRL_DATA_TYPE_RAW 0 -#define UVC_CTRL_DATA_TYPE_SIGNED 1 -#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 -#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 -#define UVC_CTRL_DATA_TYPE_ENUM 4 -#define UVC_CTRL_DATA_TYPE_BITMASK 5 - -/* Control flags */ -#define UVC_CTRL_FLAG_SET_CUR (1 << 0) -#define UVC_CTRL_FLAG_GET_CUR (1 << 1) -#define UVC_CTRL_FLAG_GET_MIN (1 << 2) -#define UVC_CTRL_FLAG_GET_MAX (1 << 3) -#define UVC_CTRL_FLAG_GET_RES (1 << 4) -#define UVC_CTRL_FLAG_GET_DEF (1 << 5) -/* Control should be saved at suspend and restored at resume. */ -#define UVC_CTRL_FLAG_RESTORE (1 << 6) -/* Control can be updated by the camera. */ -#define UVC_CTRL_FLAG_AUTO_UPDATE (1 << 7) - -#define UVC_CTRL_FLAG_GET_RANGE \ - (UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \ - UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \ - UVC_CTRL_FLAG_GET_DEF) - -struct uvc_menu_info { - __u32 value; - __u8 name[32]; -}; - -struct uvc_xu_control_mapping { - __u32 id; - __u8 name[32]; - __u8 entity[16]; - __u8 selector; - - __u8 size; - __u8 offset; - __u32 v4l2_type; - __u32 data_type; - - struct uvc_menu_info __user *menu_info; - __u32 menu_count; - - __u32 reserved[4]; -}; - -struct uvc_xu_control_query { - __u8 unit; - __u8 selector; - __u8 query; /* Video Class-Specific Request Code, */ - /* defined in linux/usb/video.h A.8. */ - __u16 size; - __u8 __user *data; -}; - -#define UVCIOC_CTRL_MAP _IOWR('u', 0x20, struct uvc_xu_control_mapping) -#define UVCIOC_CTRL_QUERY _IOWR('u', 0x21, struct uvc_xu_control_query) - -#endif diff --git a/include/linux/v4l2-common.h b/include/linux/v4l2-common.h deleted file mode 100644 index 4f0667e010dd..000000000000 --- a/include/linux/v4l2-common.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/linux/v4l2-common.h - * - * Common V4L2 and V4L2 subdev definitions. - * - * Users are advised to #include this file either through videodev2.h - * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer - * to this file directly. - * - * Copyright (C) 2012 Nokia Corporation - * Contact: Sakari Ailus - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#ifndef __V4L2_COMMON__ -#define __V4L2_COMMON__ - -/* - * - * Selection interface definitions - * - */ - -/* Current cropping area */ -#define V4L2_SEL_TGT_CROP 0x0000 -/* Default cropping area */ -#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001 -/* Cropping bounds */ -#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002 -/* Current composing area */ -#define V4L2_SEL_TGT_COMPOSE 0x0100 -/* Default composing area */ -#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101 -/* Composing bounds */ -#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102 -/* Current composing area plus all padding pixels */ -#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103 - -/* Backward compatibility target definitions --- to be removed. */ -#define V4L2_SEL_TGT_CROP_ACTIVE V4L2_SEL_TGT_CROP -#define V4L2_SEL_TGT_COMPOSE_ACTIVE V4L2_SEL_TGT_COMPOSE -#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL V4L2_SEL_TGT_CROP -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL V4L2_SEL_TGT_COMPOSE -#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS V4L2_SEL_TGT_CROP_BOUNDS -#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS V4L2_SEL_TGT_COMPOSE_BOUNDS - -/* Selection flags */ -#define V4L2_SEL_FLAG_GE (1 << 0) -#define V4L2_SEL_FLAG_LE (1 << 1) -#define V4L2_SEL_FLAG_KEEP_CONFIG (1 << 2) - -/* Backward compatibility flag definitions --- to be removed. */ -#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE V4L2_SEL_FLAG_GE -#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE V4L2_SEL_FLAG_LE -#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG - -#endif /* __V4L2_COMMON__ */ diff --git a/include/linux/v4l2-controls.h b/include/linux/v4l2-controls.h deleted file mode 100644 index f56c945cecd4..000000000000 --- a/include/linux/v4l2-controls.h +++ /dev/null @@ -1,803 +0,0 @@ -/* - * Video for Linux Two controls header file - * - * Copyright (C) 1999-2012 the contributors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Alternatively you can redistribute this file under the terms of the - * BSD license as stated below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. The names of its contributors may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED - * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * The contents of this header was split off from videodev2.h. All control - * definitions should be added to this header, which is included by - * videodev2.h. - */ - -#ifndef __LINUX_V4L2_CONTROLS_H -#define __LINUX_V4L2_CONTROLS_H - -/* Control classes */ -#define V4L2_CTRL_CLASS_USER 0x00980000 /* Old-style 'user' controls */ -#define V4L2_CTRL_CLASS_MPEG 0x00990000 /* MPEG-compression controls */ -#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */ -#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */ -#define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */ -#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ -#define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */ -#define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */ -#define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */ - -/* User-class control IDs */ - -#define V4L2_CID_BASE (V4L2_CTRL_CLASS_USER | 0x900) -#define V4L2_CID_USER_BASE V4L2_CID_BASE -#define V4L2_CID_USER_CLASS (V4L2_CTRL_CLASS_USER | 1) -#define V4L2_CID_BRIGHTNESS (V4L2_CID_BASE+0) -#define V4L2_CID_CONTRAST (V4L2_CID_BASE+1) -#define V4L2_CID_SATURATION (V4L2_CID_BASE+2) -#define V4L2_CID_HUE (V4L2_CID_BASE+3) -#define V4L2_CID_AUDIO_VOLUME (V4L2_CID_BASE+5) -#define V4L2_CID_AUDIO_BALANCE (V4L2_CID_BASE+6) -#define V4L2_CID_AUDIO_BASS (V4L2_CID_BASE+7) -#define V4L2_CID_AUDIO_TREBLE (V4L2_CID_BASE+8) -#define V4L2_CID_AUDIO_MUTE (V4L2_CID_BASE+9) -#define V4L2_CID_AUDIO_LOUDNESS (V4L2_CID_BASE+10) -#define V4L2_CID_BLACK_LEVEL (V4L2_CID_BASE+11) /* Deprecated */ -#define V4L2_CID_AUTO_WHITE_BALANCE (V4L2_CID_BASE+12) -#define V4L2_CID_DO_WHITE_BALANCE (V4L2_CID_BASE+13) -#define V4L2_CID_RED_BALANCE (V4L2_CID_BASE+14) -#define V4L2_CID_BLUE_BALANCE (V4L2_CID_BASE+15) -#define V4L2_CID_GAMMA (V4L2_CID_BASE+16) -#define V4L2_CID_WHITENESS (V4L2_CID_GAMMA) /* Deprecated */ -#define V4L2_CID_EXPOSURE (V4L2_CID_BASE+17) -#define V4L2_CID_AUTOGAIN (V4L2_CID_BASE+18) -#define V4L2_CID_GAIN (V4L2_CID_BASE+19) -#define V4L2_CID_HFLIP (V4L2_CID_BASE+20) -#define V4L2_CID_VFLIP (V4L2_CID_BASE+21) - -/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) - -#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) -enum v4l2_power_line_frequency { - V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, - V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1, - V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2, - V4L2_CID_POWER_LINE_FREQUENCY_AUTO = 3, -}; -#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25) -#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26) -#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27) -#define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28) -#define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29) -#define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30) -#define V4L2_CID_COLORFX (V4L2_CID_BASE+31) -enum v4l2_colorfx { - V4L2_COLORFX_NONE = 0, - V4L2_COLORFX_BW = 1, - V4L2_COLORFX_SEPIA = 2, - V4L2_COLORFX_NEGATIVE = 3, - V4L2_COLORFX_EMBOSS = 4, - V4L2_COLORFX_SKETCH = 5, - V4L2_COLORFX_SKY_BLUE = 6, - V4L2_COLORFX_GRASS_GREEN = 7, - V4L2_COLORFX_SKIN_WHITEN = 8, - V4L2_COLORFX_VIVID = 9, - V4L2_COLORFX_AQUA = 10, - V4L2_COLORFX_ART_FREEZE = 11, - V4L2_COLORFX_SILHOUETTE = 12, - V4L2_COLORFX_SOLARIZATION = 13, - V4L2_COLORFX_ANTIQUE = 14, - V4L2_COLORFX_SET_CBCR = 15, -}; -#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) -#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) - -#define V4L2_CID_ROTATE (V4L2_CID_BASE+34) -#define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35) - -#define V4L2_CID_CHROMA_GAIN (V4L2_CID_BASE+36) - -#define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37) -#define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38) - -#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE (V4L2_CID_BASE+39) -#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT (V4L2_CID_BASE+40) - -#define V4L2_CID_ALPHA_COMPONENT (V4L2_CID_BASE+41) -#define V4L2_CID_COLORFX_CBCR (V4L2_CID_BASE+42) - -/* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) - - -/* MPEG-class control IDs */ - -#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) -#define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1) - -/* MPEG streams, specific to multiplexed streams */ -#define V4L2_CID_MPEG_STREAM_TYPE (V4L2_CID_MPEG_BASE+0) -enum v4l2_mpeg_stream_type { - V4L2_MPEG_STREAM_TYPE_MPEG2_PS = 0, /* MPEG-2 program stream */ - V4L2_MPEG_STREAM_TYPE_MPEG2_TS = 1, /* MPEG-2 transport stream */ - V4L2_MPEG_STREAM_TYPE_MPEG1_SS = 2, /* MPEG-1 system stream */ - V4L2_MPEG_STREAM_TYPE_MPEG2_DVD = 3, /* MPEG-2 DVD-compatible stream */ - V4L2_MPEG_STREAM_TYPE_MPEG1_VCD = 4, /* MPEG-1 VCD-compatible stream */ - V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */ -}; -#define V4L2_CID_MPEG_STREAM_PID_PMT (V4L2_CID_MPEG_BASE+1) -#define V4L2_CID_MPEG_STREAM_PID_AUDIO (V4L2_CID_MPEG_BASE+2) -#define V4L2_CID_MPEG_STREAM_PID_VIDEO (V4L2_CID_MPEG_BASE+3) -#define V4L2_CID_MPEG_STREAM_PID_PCR (V4L2_CID_MPEG_BASE+4) -#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO (V4L2_CID_MPEG_BASE+5) -#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO (V4L2_CID_MPEG_BASE+6) -#define V4L2_CID_MPEG_STREAM_VBI_FMT (V4L2_CID_MPEG_BASE+7) -enum v4l2_mpeg_stream_vbi_fmt { - V4L2_MPEG_STREAM_VBI_FMT_NONE = 0, /* No VBI in the MPEG stream */ - V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1, /* VBI in private packets, IVTV format */ -}; - -/* MPEG audio controls specific to multiplexed streams */ -#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ (V4L2_CID_MPEG_BASE+100) -enum v4l2_mpeg_audio_sampling_freq { - V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0, - V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1, - V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2, -}; -#define V4L2_CID_MPEG_AUDIO_ENCODING (V4L2_CID_MPEG_BASE+101) -enum v4l2_mpeg_audio_encoding { - V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0, - V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1, - V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2, - V4L2_MPEG_AUDIO_ENCODING_AAC = 3, - V4L2_MPEG_AUDIO_ENCODING_AC3 = 4, -}; -#define V4L2_CID_MPEG_AUDIO_L1_BITRATE (V4L2_CID_MPEG_BASE+102) -enum v4l2_mpeg_audio_l1_bitrate { - V4L2_MPEG_AUDIO_L1_BITRATE_32K = 0, - V4L2_MPEG_AUDIO_L1_BITRATE_64K = 1, - V4L2_MPEG_AUDIO_L1_BITRATE_96K = 2, - V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3, - V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4, - V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5, - V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6, - V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7, - V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8, - V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9, - V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10, - V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11, - V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12, - V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13, -}; -#define V4L2_CID_MPEG_AUDIO_L2_BITRATE (V4L2_CID_MPEG_BASE+103) -enum v4l2_mpeg_audio_l2_bitrate { - V4L2_MPEG_AUDIO_L2_BITRATE_32K = 0, - V4L2_MPEG_AUDIO_L2_BITRATE_48K = 1, - V4L2_MPEG_AUDIO_L2_BITRATE_56K = 2, - V4L2_MPEG_AUDIO_L2_BITRATE_64K = 3, - V4L2_MPEG_AUDIO_L2_BITRATE_80K = 4, - V4L2_MPEG_AUDIO_L2_BITRATE_96K = 5, - V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6, - V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7, - V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8, - V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9, - V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10, - V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11, - V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12, - V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13, -}; -#define V4L2_CID_MPEG_AUDIO_L3_BITRATE (V4L2_CID_MPEG_BASE+104) -enum v4l2_mpeg_audio_l3_bitrate { - V4L2_MPEG_AUDIO_L3_BITRATE_32K = 0, - V4L2_MPEG_AUDIO_L3_BITRATE_40K = 1, - V4L2_MPEG_AUDIO_L3_BITRATE_48K = 2, - V4L2_MPEG_AUDIO_L3_BITRATE_56K = 3, - V4L2_MPEG_AUDIO_L3_BITRATE_64K = 4, - V4L2_MPEG_AUDIO_L3_BITRATE_80K = 5, - V4L2_MPEG_AUDIO_L3_BITRATE_96K = 6, - V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7, - V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8, - V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9, - V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10, - V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11, - V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12, - V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13, -}; -#define V4L2_CID_MPEG_AUDIO_MODE (V4L2_CID_MPEG_BASE+105) -enum v4l2_mpeg_audio_mode { - V4L2_MPEG_AUDIO_MODE_STEREO = 0, - V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1, - V4L2_MPEG_AUDIO_MODE_DUAL = 2, - V4L2_MPEG_AUDIO_MODE_MONO = 3, -}; -#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION (V4L2_CID_MPEG_BASE+106) -enum v4l2_mpeg_audio_mode_extension { - V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4 = 0, - V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8 = 1, - V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2, - V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3, -}; -#define V4L2_CID_MPEG_AUDIO_EMPHASIS (V4L2_CID_MPEG_BASE+107) -enum v4l2_mpeg_audio_emphasis { - V4L2_MPEG_AUDIO_EMPHASIS_NONE = 0, - V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1, - V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17 = 2, -}; -#define V4L2_CID_MPEG_AUDIO_CRC (V4L2_CID_MPEG_BASE+108) -enum v4l2_mpeg_audio_crc { - V4L2_MPEG_AUDIO_CRC_NONE = 0, - V4L2_MPEG_AUDIO_CRC_CRC16 = 1, -}; -#define V4L2_CID_MPEG_AUDIO_MUTE (V4L2_CID_MPEG_BASE+109) -#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE (V4L2_CID_MPEG_BASE+110) -#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE (V4L2_CID_MPEG_BASE+111) -enum v4l2_mpeg_audio_ac3_bitrate { - V4L2_MPEG_AUDIO_AC3_BITRATE_32K = 0, - V4L2_MPEG_AUDIO_AC3_BITRATE_40K = 1, - V4L2_MPEG_AUDIO_AC3_BITRATE_48K = 2, - V4L2_MPEG_AUDIO_AC3_BITRATE_56K = 3, - V4L2_MPEG_AUDIO_AC3_BITRATE_64K = 4, - V4L2_MPEG_AUDIO_AC3_BITRATE_80K = 5, - V4L2_MPEG_AUDIO_AC3_BITRATE_96K = 6, - V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7, - V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8, - V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9, - V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10, - V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11, - V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12, - V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13, - V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14, - V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15, - V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16, - V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17, - V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18, -}; -#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112) -enum v4l2_mpeg_audio_dec_playback { - V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0, - V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1, - V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2, - V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3, - V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, - V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, -}; -#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113) - -/* MPEG video controls specific to multiplexed streams */ -#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200) -enum v4l2_mpeg_video_encoding { - V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, - V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, - V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2, -}; -#define V4L2_CID_MPEG_VIDEO_ASPECT (V4L2_CID_MPEG_BASE+201) -enum v4l2_mpeg_video_aspect { - V4L2_MPEG_VIDEO_ASPECT_1x1 = 0, - V4L2_MPEG_VIDEO_ASPECT_4x3 = 1, - V4L2_MPEG_VIDEO_ASPECT_16x9 = 2, - V4L2_MPEG_VIDEO_ASPECT_221x100 = 3, -}; -#define V4L2_CID_MPEG_VIDEO_B_FRAMES (V4L2_CID_MPEG_BASE+202) -#define V4L2_CID_MPEG_VIDEO_GOP_SIZE (V4L2_CID_MPEG_BASE+203) -#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE (V4L2_CID_MPEG_BASE+204) -#define V4L2_CID_MPEG_VIDEO_PULLDOWN (V4L2_CID_MPEG_BASE+205) -#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE (V4L2_CID_MPEG_BASE+206) -enum v4l2_mpeg_video_bitrate_mode { - V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0, - V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1, -}; -#define V4L2_CID_MPEG_VIDEO_BITRATE (V4L2_CID_MPEG_BASE+207) -#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (V4L2_CID_MPEG_BASE+208) -#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209) -#define V4L2_CID_MPEG_VIDEO_MUTE (V4L2_CID_MPEG_BASE+210) -#define V4L2_CID_MPEG_VIDEO_MUTE_YUV (V4L2_CID_MPEG_BASE+211) -#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (V4L2_CID_MPEG_BASE+212) -#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER (V4L2_CID_MPEG_BASE+213) -#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB (V4L2_CID_MPEG_BASE+214) -#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (V4L2_CID_MPEG_BASE+215) -#define V4L2_CID_MPEG_VIDEO_HEADER_MODE (V4L2_CID_MPEG_BASE+216) -enum v4l2_mpeg_video_header_mode { - V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE = 0, - V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME = 1, - -}; -#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (V4L2_CID_MPEG_BASE+217) -#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE (V4L2_CID_MPEG_BASE+218) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES (V4L2_CID_MPEG_BASE+219) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB (V4L2_CID_MPEG_BASE+220) -#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_MPEG_BASE+221) -enum v4l2_mpeg_video_multi_slice_mode { - V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE = 0, - V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB = 1, - V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, -}; -#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) -#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) -#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224) -#define V4L2_CID_MPEG_VIDEO_VBV_DELAY (V4L2_CID_MPEG_BASE+225) - -#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) -#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) -#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) -#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP (V4L2_CID_MPEG_BASE+303) -#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP (V4L2_CID_MPEG_BASE+304) -#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP (V4L2_CID_MPEG_BASE+350) -#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP (V4L2_CID_MPEG_BASE+351) -#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP (V4L2_CID_MPEG_BASE+352) -#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP (V4L2_CID_MPEG_BASE+353) -#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP (V4L2_CID_MPEG_BASE+354) -#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM (V4L2_CID_MPEG_BASE+355) -#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (V4L2_CID_MPEG_BASE+356) -#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE (V4L2_CID_MPEG_BASE+357) -enum v4l2_mpeg_video_h264_entropy_mode { - V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC = 0, - V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC = 1, -}; -#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD (V4L2_CID_MPEG_BASE+358) -#define V4L2_CID_MPEG_VIDEO_H264_LEVEL (V4L2_CID_MPEG_BASE+359) -enum v4l2_mpeg_video_h264_level { - V4L2_MPEG_VIDEO_H264_LEVEL_1_0 = 0, - V4L2_MPEG_VIDEO_H264_LEVEL_1B = 1, - V4L2_MPEG_VIDEO_H264_LEVEL_1_1 = 2, - V4L2_MPEG_VIDEO_H264_LEVEL_1_2 = 3, - V4L2_MPEG_VIDEO_H264_LEVEL_1_3 = 4, - V4L2_MPEG_VIDEO_H264_LEVEL_2_0 = 5, - V4L2_MPEG_VIDEO_H264_LEVEL_2_1 = 6, - V4L2_MPEG_VIDEO_H264_LEVEL_2_2 = 7, - V4L2_MPEG_VIDEO_H264_LEVEL_3_0 = 8, - V4L2_MPEG_VIDEO_H264_LEVEL_3_1 = 9, - V4L2_MPEG_VIDEO_H264_LEVEL_3_2 = 10, - V4L2_MPEG_VIDEO_H264_LEVEL_4_0 = 11, - V4L2_MPEG_VIDEO_H264_LEVEL_4_1 = 12, - V4L2_MPEG_VIDEO_H264_LEVEL_4_2 = 13, - V4L2_MPEG_VIDEO_H264_LEVEL_5_0 = 14, - V4L2_MPEG_VIDEO_H264_LEVEL_5_1 = 15, -}; -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_MPEG_BASE+360) -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_MPEG_BASE+361) -#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE (V4L2_CID_MPEG_BASE+362) -enum v4l2_mpeg_video_h264_loop_filter_mode { - V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED = 0, - V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED = 1, - V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY = 2, -}; -#define V4L2_CID_MPEG_VIDEO_H264_PROFILE (V4L2_CID_MPEG_BASE+363) -enum v4l2_mpeg_video_h264_profile { - V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE = 0, - V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE = 1, - V4L2_MPEG_VIDEO_H264_PROFILE_MAIN = 2, - V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED = 3, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH = 4, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10 = 5, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422 = 6, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE = 7, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA = 8, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA = 9, - V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA = 10, - V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA = 11, - V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE = 12, - V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH = 13, - V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA = 14, - V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH = 15, - V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH = 16, -}; -#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_MPEG_BASE+364) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_MPEG_BASE+365) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (V4L2_CID_MPEG_BASE+366) -#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC (V4L2_CID_MPEG_BASE+367) -enum v4l2_mpeg_video_h264_vui_sar_idc { - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED = 0, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1 = 1, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11 = 2, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11 = 3, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11 = 4, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33 = 5, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11 = 6, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11 = 7, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11 = 8, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33 = 9, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11 = 10, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11 = 11, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33 = 12, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99 = 13, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3 = 14, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2 = 15, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1 = 16, - V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED = 17, -}; -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING (V4L2_CID_MPEG_BASE+368) -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0 (V4L2_CID_MPEG_BASE+369) -#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE (V4L2_CID_MPEG_BASE+370) -enum v4l2_mpeg_video_h264_sei_fp_arrangement_type { - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD = 0, - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN = 1, - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW = 2, - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE = 3, - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM = 4, - V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL = 5, -}; -#define V4L2_CID_MPEG_VIDEO_H264_FMO (V4L2_CID_MPEG_BASE+371) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE (V4L2_CID_MPEG_BASE+372) -enum v4l2_mpeg_video_h264_fmo_map_type { - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES = 0, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES = 1, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER = 2, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT = 3, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN = 4, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN = 5, - V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT = 6, -}; -#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP (V4L2_CID_MPEG_BASE+373) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION (V4L2_CID_MPEG_BASE+374) -enum v4l2_mpeg_video_h264_fmo_change_dir { - V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT = 0, - V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT = 1, -}; -#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE (V4L2_CID_MPEG_BASE+375) -#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH (V4L2_CID_MPEG_BASE+376) -#define V4L2_CID_MPEG_VIDEO_H264_ASO (V4L2_CID_MPEG_BASE+377) -#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER (V4L2_CID_MPEG_BASE+378) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING (V4L2_CID_MPEG_BASE+379) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE (V4L2_CID_MPEG_BASE+380) -enum v4l2_mpeg_video_h264_hierarchical_coding_type { - V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B = 0, - V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P = 1, -}; -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER (V4L2_CID_MPEG_BASE+381) -#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382) -#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) -#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) -#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) -#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP (V4L2_CID_MPEG_BASE+403) -#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP (V4L2_CID_MPEG_BASE+404) -#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL (V4L2_CID_MPEG_BASE+405) -enum v4l2_mpeg_video_mpeg4_level { - V4L2_MPEG_VIDEO_MPEG4_LEVEL_0 = 0, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B = 1, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_1 = 2, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_2 = 3, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_3 = 4, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B = 5, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_4 = 6, - V4L2_MPEG_VIDEO_MPEG4_LEVEL_5 = 7, -}; -#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE (V4L2_CID_MPEG_BASE+406) -enum v4l2_mpeg_video_mpeg4_profile { - V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE = 0, - V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE = 1, - V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE = 2, - V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE = 3, - V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY = 4, -}; -#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407) - -/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ -#define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000) -#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0) -enum v4l2_mpeg_cx2341x_video_spatial_filter_mode { - V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0, - V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO = 1, -}; -#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+1) -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+2) -enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type { - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF = 0, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT = 2, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE = 3, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4, -}; -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+3) -enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type { - V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF = 0, - V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1, -}; -#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+4) -enum v4l2_mpeg_cx2341x_video_temporal_filter_mode { - V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0, - V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO = 1, -}; -#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (V4L2_CID_MPEG_CX2341X_BASE+5) -#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE (V4L2_CID_MPEG_CX2341X_BASE+6) -enum v4l2_mpeg_cx2341x_video_median_filter_type { - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF = 0, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR = 1, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT = 2, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG = 4, -}; -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+7) -#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+8) -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM (V4L2_CID_MPEG_CX2341X_BASE+9) -#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP (V4L2_CID_MPEG_CX2341X_BASE+10) -#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS (V4L2_CID_MPEG_CX2341X_BASE+11) - -/* MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */ -#define V4L2_CID_MPEG_MFC51_BASE (V4L2_CTRL_CLASS_MPEG | 0x1100) - -#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (V4L2_CID_MPEG_MFC51_BASE+0) -#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE (V4L2_CID_MPEG_MFC51_BASE+1) -#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE (V4L2_CID_MPEG_MFC51_BASE+2) -enum v4l2_mpeg_mfc51_video_frame_skip_mode { - V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED = 0, - V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT = 1, - V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT = 2, -}; -#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE (V4L2_CID_MPEG_MFC51_BASE+3) -enum v4l2_mpeg_mfc51_video_force_frame_type { - V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED = 0, - V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME = 1, - V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED = 2, -}; -#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING (V4L2_CID_MPEG_MFC51_BASE+4) -#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV (V4L2_CID_MPEG_MFC51_BASE+5) -#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT (V4L2_CID_MPEG_MFC51_BASE+6) -#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF (V4L2_CID_MPEG_MFC51_BASE+7) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY (V4L2_CID_MPEG_MFC51_BASE+50) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK (V4L2_CID_MPEG_MFC51_BASE+51) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH (V4L2_CID_MPEG_MFC51_BASE+52) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC (V4L2_CID_MPEG_MFC51_BASE+53) -#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (V4L2_CID_MPEG_MFC51_BASE+54) - - -/* Camera class control IDs */ - -#define V4L2_CID_CAMERA_CLASS_BASE (V4L2_CTRL_CLASS_CAMERA | 0x900) -#define V4L2_CID_CAMERA_CLASS (V4L2_CTRL_CLASS_CAMERA | 1) - -#define V4L2_CID_EXPOSURE_AUTO (V4L2_CID_CAMERA_CLASS_BASE+1) -enum v4l2_exposure_auto_type { - V4L2_EXPOSURE_AUTO = 0, - V4L2_EXPOSURE_MANUAL = 1, - V4L2_EXPOSURE_SHUTTER_PRIORITY = 2, - V4L2_EXPOSURE_APERTURE_PRIORITY = 3 -}; -#define V4L2_CID_EXPOSURE_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+2) -#define V4L2_CID_EXPOSURE_AUTO_PRIORITY (V4L2_CID_CAMERA_CLASS_BASE+3) - -#define V4L2_CID_PAN_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+4) -#define V4L2_CID_TILT_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+5) -#define V4L2_CID_PAN_RESET (V4L2_CID_CAMERA_CLASS_BASE+6) -#define V4L2_CID_TILT_RESET (V4L2_CID_CAMERA_CLASS_BASE+7) - -#define V4L2_CID_PAN_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+8) -#define V4L2_CID_TILT_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+9) - -#define V4L2_CID_FOCUS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+10) -#define V4L2_CID_FOCUS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+11) -#define V4L2_CID_FOCUS_AUTO (V4L2_CID_CAMERA_CLASS_BASE+12) - -#define V4L2_CID_ZOOM_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+13) -#define V4L2_CID_ZOOM_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+14) -#define V4L2_CID_ZOOM_CONTINUOUS (V4L2_CID_CAMERA_CLASS_BASE+15) - -#define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16) - -#define V4L2_CID_IRIS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+17) -#define V4L2_CID_IRIS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+18) - -#define V4L2_CID_AUTO_EXPOSURE_BIAS (V4L2_CID_CAMERA_CLASS_BASE+19) - -#define V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE (V4L2_CID_CAMERA_CLASS_BASE+20) -enum v4l2_auto_n_preset_white_balance { - V4L2_WHITE_BALANCE_MANUAL = 0, - V4L2_WHITE_BALANCE_AUTO = 1, - V4L2_WHITE_BALANCE_INCANDESCENT = 2, - V4L2_WHITE_BALANCE_FLUORESCENT = 3, - V4L2_WHITE_BALANCE_FLUORESCENT_H = 4, - V4L2_WHITE_BALANCE_HORIZON = 5, - V4L2_WHITE_BALANCE_DAYLIGHT = 6, - V4L2_WHITE_BALANCE_FLASH = 7, - V4L2_WHITE_BALANCE_CLOUDY = 8, - V4L2_WHITE_BALANCE_SHADE = 9, -}; - -#define V4L2_CID_WIDE_DYNAMIC_RANGE (V4L2_CID_CAMERA_CLASS_BASE+21) -#define V4L2_CID_IMAGE_STABILIZATION (V4L2_CID_CAMERA_CLASS_BASE+22) - -#define V4L2_CID_ISO_SENSITIVITY (V4L2_CID_CAMERA_CLASS_BASE+23) -#define V4L2_CID_ISO_SENSITIVITY_AUTO (V4L2_CID_CAMERA_CLASS_BASE+24) -enum v4l2_iso_sensitivity_auto_type { - V4L2_ISO_SENSITIVITY_MANUAL = 0, - V4L2_ISO_SENSITIVITY_AUTO = 1, -}; - -#define V4L2_CID_EXPOSURE_METERING (V4L2_CID_CAMERA_CLASS_BASE+25) -enum v4l2_exposure_metering { - V4L2_EXPOSURE_METERING_AVERAGE = 0, - V4L2_EXPOSURE_METERING_CENTER_WEIGHTED = 1, - V4L2_EXPOSURE_METERING_SPOT = 2, -}; - -#define V4L2_CID_SCENE_MODE (V4L2_CID_CAMERA_CLASS_BASE+26) -enum v4l2_scene_mode { - V4L2_SCENE_MODE_NONE = 0, - V4L2_SCENE_MODE_BACKLIGHT = 1, - V4L2_SCENE_MODE_BEACH_SNOW = 2, - V4L2_SCENE_MODE_CANDLE_LIGHT = 3, - V4L2_SCENE_MODE_DAWN_DUSK = 4, - V4L2_SCENE_MODE_FALL_COLORS = 5, - V4L2_SCENE_MODE_FIREWORKS = 6, - V4L2_SCENE_MODE_LANDSCAPE = 7, - V4L2_SCENE_MODE_NIGHT = 8, - V4L2_SCENE_MODE_PARTY_INDOOR = 9, - V4L2_SCENE_MODE_PORTRAIT = 10, - V4L2_SCENE_MODE_SPORTS = 11, - V4L2_SCENE_MODE_SUNSET = 12, - V4L2_SCENE_MODE_TEXT = 13, -}; - -#define V4L2_CID_3A_LOCK (V4L2_CID_CAMERA_CLASS_BASE+27) -#define V4L2_LOCK_EXPOSURE (1 << 0) -#define V4L2_LOCK_WHITE_BALANCE (1 << 1) -#define V4L2_LOCK_FOCUS (1 << 2) - -#define V4L2_CID_AUTO_FOCUS_START (V4L2_CID_CAMERA_CLASS_BASE+28) -#define V4L2_CID_AUTO_FOCUS_STOP (V4L2_CID_CAMERA_CLASS_BASE+29) -#define V4L2_CID_AUTO_FOCUS_STATUS (V4L2_CID_CAMERA_CLASS_BASE+30) -#define V4L2_AUTO_FOCUS_STATUS_IDLE (0 << 0) -#define V4L2_AUTO_FOCUS_STATUS_BUSY (1 << 0) -#define V4L2_AUTO_FOCUS_STATUS_REACHED (1 << 1) -#define V4L2_AUTO_FOCUS_STATUS_FAILED (1 << 2) - -#define V4L2_CID_AUTO_FOCUS_RANGE (V4L2_CID_CAMERA_CLASS_BASE+31) -enum v4l2_auto_focus_range { - V4L2_AUTO_FOCUS_RANGE_AUTO = 0, - V4L2_AUTO_FOCUS_RANGE_NORMAL = 1, - V4L2_AUTO_FOCUS_RANGE_MACRO = 2, - V4L2_AUTO_FOCUS_RANGE_INFINITY = 3, -}; - - -/* FM Modulator class control IDs */ - -#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) -#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1) - -#define V4L2_CID_RDS_TX_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 1) -#define V4L2_CID_RDS_TX_PI (V4L2_CID_FM_TX_CLASS_BASE + 2) -#define V4L2_CID_RDS_TX_PTY (V4L2_CID_FM_TX_CLASS_BASE + 3) -#define V4L2_CID_RDS_TX_PS_NAME (V4L2_CID_FM_TX_CLASS_BASE + 5) -#define V4L2_CID_RDS_TX_RADIO_TEXT (V4L2_CID_FM_TX_CLASS_BASE + 6) - -#define V4L2_CID_AUDIO_LIMITER_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 64) -#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 65) -#define V4L2_CID_AUDIO_LIMITER_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 66) - -#define V4L2_CID_AUDIO_COMPRESSION_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 80) -#define V4L2_CID_AUDIO_COMPRESSION_GAIN (V4L2_CID_FM_TX_CLASS_BASE + 81) -#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD (V4L2_CID_FM_TX_CLASS_BASE + 82) -#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME (V4L2_CID_FM_TX_CLASS_BASE + 83) -#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME (V4L2_CID_FM_TX_CLASS_BASE + 84) - -#define V4L2_CID_PILOT_TONE_ENABLED (V4L2_CID_FM_TX_CLASS_BASE + 96) -#define V4L2_CID_PILOT_TONE_DEVIATION (V4L2_CID_FM_TX_CLASS_BASE + 97) -#define V4L2_CID_PILOT_TONE_FREQUENCY (V4L2_CID_FM_TX_CLASS_BASE + 98) - -#define V4L2_CID_TUNE_PREEMPHASIS (V4L2_CID_FM_TX_CLASS_BASE + 112) -enum v4l2_preemphasis { - V4L2_PREEMPHASIS_DISABLED = 0, - V4L2_PREEMPHASIS_50_uS = 1, - V4L2_PREEMPHASIS_75_uS = 2, -}; -#define V4L2_CID_TUNE_POWER_LEVEL (V4L2_CID_FM_TX_CLASS_BASE + 113) -#define V4L2_CID_TUNE_ANTENNA_CAPACITOR (V4L2_CID_FM_TX_CLASS_BASE + 114) - - -/* Flash and privacy (indicator) light controls */ - -#define V4L2_CID_FLASH_CLASS_BASE (V4L2_CTRL_CLASS_FLASH | 0x900) -#define V4L2_CID_FLASH_CLASS (V4L2_CTRL_CLASS_FLASH | 1) - -#define V4L2_CID_FLASH_LED_MODE (V4L2_CID_FLASH_CLASS_BASE + 1) -enum v4l2_flash_led_mode { - V4L2_FLASH_LED_MODE_NONE, - V4L2_FLASH_LED_MODE_FLASH, - V4L2_FLASH_LED_MODE_TORCH, -}; - -#define V4L2_CID_FLASH_STROBE_SOURCE (V4L2_CID_FLASH_CLASS_BASE + 2) -enum v4l2_flash_strobe_source { - V4L2_FLASH_STROBE_SOURCE_SOFTWARE, - V4L2_FLASH_STROBE_SOURCE_EXTERNAL, -}; - -#define V4L2_CID_FLASH_STROBE (V4L2_CID_FLASH_CLASS_BASE + 3) -#define V4L2_CID_FLASH_STROBE_STOP (V4L2_CID_FLASH_CLASS_BASE + 4) -#define V4L2_CID_FLASH_STROBE_STATUS (V4L2_CID_FLASH_CLASS_BASE + 5) - -#define V4L2_CID_FLASH_TIMEOUT (V4L2_CID_FLASH_CLASS_BASE + 6) -#define V4L2_CID_FLASH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 7) -#define V4L2_CID_FLASH_TORCH_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 8) -#define V4L2_CID_FLASH_INDICATOR_INTENSITY (V4L2_CID_FLASH_CLASS_BASE + 9) - -#define V4L2_CID_FLASH_FAULT (V4L2_CID_FLASH_CLASS_BASE + 10) -#define V4L2_FLASH_FAULT_OVER_VOLTAGE (1 << 0) -#define V4L2_FLASH_FAULT_TIMEOUT (1 << 1) -#define V4L2_FLASH_FAULT_OVER_TEMPERATURE (1 << 2) -#define V4L2_FLASH_FAULT_SHORT_CIRCUIT (1 << 3) -#define V4L2_FLASH_FAULT_OVER_CURRENT (1 << 4) -#define V4L2_FLASH_FAULT_INDICATOR (1 << 5) - -#define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11) -#define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12) - - -/* JPEG-class control IDs */ - -#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900) -#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1) - -#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1) -enum v4l2_jpeg_chroma_subsampling { - V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0, - V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1, - V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2, - V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3, - V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4, - V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5, -}; -#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2) -#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3) - -#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4) -#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0) -#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1) -#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16) -#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) -#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) - -/* Image source controls */ -#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900) -#define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1) - -#define V4L2_CID_VBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1) -#define V4L2_CID_HBLANK (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2) -#define V4L2_CID_ANALOGUE_GAIN (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3) - - -/* Image processing controls */ - -#define V4L2_CID_IMAGE_PROC_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_PROC | 0x900) -#define V4L2_CID_IMAGE_PROC_CLASS (V4L2_CTRL_CLASS_IMAGE_PROC | 1) - -#define V4L2_CID_LINK_FREQ (V4L2_CID_IMAGE_PROC_CLASS_BASE + 1) -#define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) -#define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) - -#endif diff --git a/include/linux/v4l2-dv-timings.h b/include/linux/v4l2-dv-timings.h deleted file mode 100644 index 9ef8172e5ed0..000000000000 --- a/include/linux/v4l2-dv-timings.h +++ /dev/null @@ -1,816 +0,0 @@ -/* - * V4L2 DV timings header. - * - * Copyright (C) 2012 Hans Verkuil - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef _V4L2_DV_TIMINGS_H -#define _V4L2_DV_TIMINGS_H - -#if __GNUC__ < 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ < 6)) -/* Sadly gcc versions older than 4.6 have a bug in how they initialize - anonymous unions where they require additional curly brackets. - This violates the C1x standard. This workaround adds the curly brackets - if needed. */ -#define V4L2_INIT_BT_TIMINGS(_width, args...) \ - { .bt = { _width , ## args } } -#else -#define V4L2_INIT_BT_TIMINGS(_width, args...) \ - .bt = { _width , ## args } -#endif - -/* CEA-861-E timings (i.e. standard HDTV timings) */ - -#define V4L2_DV_BT_CEA_640X480P59_94 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \ - 25175000, 16, 96, 48, 10, 2, 33, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_720X480P59_94 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(720, 480, 0, 0, \ - 27000000, 16, 62, 60, 9, 6, 30, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_720X576P50 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(720, 576, 0, 0, \ - 27000000, 12, 64, 68, 5, 5, 39, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_1280X720P24 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 59400000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - -#define V4L2_DV_BT_CEA_1280X720P25 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 2420, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_1280X720P30 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 1760, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - -#define V4L2_DV_BT_CEA_1280X720P50 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 440, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_1280X720P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 720, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 110, 40, 220, 5, 5, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - -#define V4L2_DV_BT_CEA_1920X1080P24 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 638, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - -#define V4L2_DV_BT_CEA_1920X1080P25 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_1920X1080P30 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - -#define V4L2_DV_BT_CEA_1920X1080I50 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 528, 44, 148, 2, 5, 15, 2, 5, 16, \ - V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_HALF_LINE) \ -} - -#define V4L2_DV_BT_CEA_1920X1080P50 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 148500000, 528, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_CEA861, 0) \ -} - -#define V4L2_DV_BT_CEA_1920X1080I60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 1, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 74250000, 88, 44, 148, 2, 5, 15, 2, 5, 16, \ - V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_HALF_LINE) \ -} - -#define V4L2_DV_BT_CEA_1920X1080P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1080, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 148500000, 88, 44, 148, 4, 5, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CEA861, \ - V4L2_DV_FL_CAN_REDUCE_FPS) \ -} - - -/* VESA Discrete Monitor Timings as per version 1.0, revision 12 */ - -#define V4L2_DV_BT_DMT_640X350P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 350, 0, V4L2_DV_HSYNC_POS_POL, \ - 31500000, 32, 64, 96, 32, 3, 60, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_640X400P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 400, 0, V4L2_DV_VSYNC_POS_POL, \ - 31500000, 32, 64, 96, 1, 3, 41, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_720X400P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(720, 400, 0, V4L2_DV_VSYNC_POS_POL, \ - 35500000, 36, 72, 108, 1, 3, 42, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -/* VGA resolutions */ -#define V4L2_DV_BT_DMT_640X480P60 V4L2_DV_BT_CEA_640X480P59_94 - -#define V4L2_DV_BT_DMT_640X480P72 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \ - 31500000, 24, 40, 128, 9, 3, 28, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_640X480P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \ - 31500000, 16, 64, 120, 1, 3, 16, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_640X480P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(640, 480, 0, 0, \ - 36000000, 56, 56, 80, 1, 3, 25, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -/* SVGA resolutions */ -#define V4L2_DV_BT_DMT_800X600P56 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 36000000, 24, 72, 128, 1, 2, 22, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_800X600P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 40000000, 40, 128, 88, 1, 4, 23, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_800X600P72 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 50000000, 56, 120, 64, 37, 6, 23, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_800X600P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 49500000, 16, 80, 160, 1, 3, 21, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_800X600P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 56250000, 32, 64, 152, 1, 3, 27, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_800X600P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(800, 600, 0, V4L2_DV_HSYNC_POS_POL, \ - 73250000, 48, 32, 80, 3, 4, 29, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_848X480P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(848, 480, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 33750000, 16, 112, 112, 6, 8, 23, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1024X768I43 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 1, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 44900000, 8, 176, 56, 0, 4, 20, 0, 4, 21, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -/* XGA resolutions */ -#define V4L2_DV_BT_DMT_1024X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \ - 65000000, 24, 136, 160, 3, 6, 29, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1024X768P70 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 0, 0, \ - 75000000, 24, 136, 144, 3, 6, 29, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1024X768P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 78750000, 16, 96, 176, 1, 3, 28, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1024X768P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 94500000, 48, 96, 208, 1, 3, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1024X768P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1024, 768, 0, V4L2_DV_HSYNC_POS_POL, \ - 115500000, 48, 32, 80, 3, 4, 38, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* XGA+ resolution */ -#define V4L2_DV_BT_DMT_1152X864P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1152, 864, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 108000000, 64, 128, 256, 1, 3, 32, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X720P60 V4L2_DV_BT_CEA_1280X720P60 - -/* WXGA resolutions */ -#define V4L2_DV_BT_DMT_1280X768P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \ - 68250000, 48, 32, 80, 3, 7, 12, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1280X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \ - 79500000, 64, 128, 192, 3, 7, 20, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X768P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \ - 102250000, 80, 128, 208, 3, 7, 27, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X768P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_VSYNC_POS_POL, \ - 117500000, 80, 136, 216, 3, 7, 31, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X768P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 768, 0, V4L2_DV_HSYNC_POS_POL, \ - 140250000, 48, 32, 80, 3, 7, 35, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1280X800P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \ - 71000000, 48, 32, 80, 3, 6, 14, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1280X800P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \ - 83500000, 72, 128, 200, 3, 6, 22, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X800P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \ - 106500000, 80, 128, 208, 3, 6, 29, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X800P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_VSYNC_POS_POL, \ - 122500000, 80, 136, 216, 3, 6, 34, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X800P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 800, 0, V4L2_DV_HSYNC_POS_POL, \ - 146250000, 48, 32, 80, 3, 6, 38, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1280X960P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 960, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 108000000, 96, 112, 312, 1, 3, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X960P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 960, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 148500000, 64, 160, 224, 1, 3, 47, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X960P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 960, 0, V4L2_DV_HSYNC_POS_POL, \ - 175500000, 48, 32, 80, 3, 4, 50, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* SXGA resolutions */ -#define V4L2_DV_BT_DMT_1280X1024P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 108000000, 48, 112, 248, 1, 3, 38, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X1024P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 135000000, 16, 144, 248, 1, 3, 38, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X1024P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 1024, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 157500000, 64, 160, 224, 1, 3, 44, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1280X1024P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1280, 1024, 0, V4L2_DV_HSYNC_POS_POL, \ - 187250000, 48, 32, 80, 3, 7, 50, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1360X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1360, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 85500000, 64, 112, 256, 3, 6, 18, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1360X768P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1360, 768, 0, V4L2_DV_HSYNC_POS_POL, \ - 148250000, 48, 32, 80, 3, 5, 37, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1366X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1366, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1366X768P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1366, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 72000000, 14, 56, 64, 1, 3, 28, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* SXGA+ resolutions */ -#define V4L2_DV_BT_DMT_1400X1050P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \ - 101000000, 48, 32, 80, 3, 4, 23, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1400X1050P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 121750000, 88, 144, 232, 3, 4, 32, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1400X1050P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 156000000, 104, 144, 248, 3, 4, 42, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1400X1050P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 179500000, 104, 152, 256, 3, 4, 48, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1400X1050P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1400, 1050, 0, V4L2_DV_HSYNC_POS_POL, \ - 208000000, 48, 32, 80, 3, 4, 55, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* WXGA+ resolutions */ -#define V4L2_DV_BT_DMT_1440X900P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \ - 88750000, 48, 32, 80, 3, 6, 17, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1440X900P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \ - 106500000, 80, 152, 232, 3, 6, 25, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1440X900P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \ - 136750000, 96, 152, 248, 3, 6, 33, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1440X900P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_VSYNC_POS_POL, \ - 157000000, 104, 152, 256, 3, 6, 39, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1440X900P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1440, 900, 0, V4L2_DV_HSYNC_POS_POL, \ - 182750000, 48, 32, 80, 3, 6, 44, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1600X900P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 900, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 108000000, 24, 80, 96, 1, 3, 96, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* UXGA resolutions */ -#define V4L2_DV_BT_DMT_1600X1200P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 162000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1600X1200P65 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 175500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1600X1200P70 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 189000000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1600X1200P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 202500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1600X1200P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 229500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1600X1200P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1600, 1200, 0, V4L2_DV_HSYNC_POS_POL, \ - 268250000, 48, 32, 80, 3, 4, 64, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* WSXGA+ resolutions */ -#define V4L2_DV_BT_DMT_1680X1050P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \ - 119000000, 48, 32, 80, 3, 6, 21, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1680X1050P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 146250000, 104, 176, 280, 3, 6, 30, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1680X1050P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 187000000, 120, 176, 296, 3, 6, 40, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1680X1050P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_VSYNC_POS_POL, \ - 214750000, 128, 176, 304, 3, 6, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1680X1050P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1680, 1050, 0, V4L2_DV_HSYNC_POS_POL, \ - 245500000, 48, 32, 80, 3, 6, 53, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1792X1344P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \ - 204750000, 128, 200, 328, 1, 3, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1792X1344P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_VSYNC_POS_POL, \ - 261000000, 96, 216, 352, 1, 3, 69, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1792X1344P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1792, 1344, 0, V4L2_DV_HSYNC_POS_POL, \ - 333250000, 48, 32, 80, 3, 4, 72, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1856X1392P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \ - 218250000, 96, 224, 352, 1, 3, 43, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1856X1392P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_VSYNC_POS_POL, \ - 288000000, 128, 224, 352, 1, 3, 104, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1856X1392P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1856, 1392, 0, V4L2_DV_HSYNC_POS_POL, \ - 356500000, 48, 32, 80, 3, 4, 75, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1920X1080P60 V4L2_DV_BT_CEA_1920X1080P60 - -/* WUXGA resolutions */ -#define V4L2_DV_BT_DMT_1920X1200P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \ - 154000000, 48, 32, 80, 3, 6, 26, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1920X1200P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \ - 193250000, 136, 200, 336, 3, 6, 36, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1920X1200P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \ - 245250000, 136, 208, 344, 3, 6, 46, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1920X1200P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_VSYNC_POS_POL, \ - 281250000, 144, 208, 352, 3, 6, 53, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_1920X1200P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1200, 0, V4L2_DV_HSYNC_POS_POL, \ - 317000000, 48, 32, 80, 3, 6, 62, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1920X1440P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \ - 234000000, 128, 208, 344, 1, 3, 56, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1920X1440P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_VSYNC_POS_POL, \ - 297000000, 144, 224, 352, 1, 3, 56, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#define V4L2_DV_BT_DMT_1920X1440P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1920, 1440, 0, V4L2_DV_HSYNC_POS_POL, \ - 380500000, 48, 32, 80, 3, 4, 78, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_2048X1152P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2048, 1152, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 162000000, 26, 80, 96, 1, 3, 44, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, V4L2_DV_FL_REDUCED_BLANKING) \ -} - -/* WQXGA resolutions */ -#define V4L2_DV_BT_DMT_2560X1600P60_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \ - 268500000, 48, 32, 80, 3, 6, 37, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_2560X1600P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \ - 348500000, 192, 280, 472, 3, 6, 49, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_2560X1600P75 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \ - 443250000, 208, 280, 488, 3, 6, 63, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_2560X1600P85 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_VSYNC_POS_POL, \ - 505250000, 208, 280, 488, 3, 6, 73, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, 0) \ -} - -#define V4L2_DV_BT_DMT_2560X1600P120_RB { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(2560, 1600, 0, V4L2_DV_HSYNC_POS_POL, \ - 552750000, 48, 32, 80, 3, 6, 85, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ - V4L2_DV_FL_REDUCED_BLANKING) \ -} - -#define V4L2_DV_BT_DMT_1366X768P60 { \ - .type = V4L2_DV_BT_656_1120, \ - V4L2_INIT_BT_TIMINGS(1366, 768, 0, \ - V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ - 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \ - V4L2_DV_BT_STD_DMT, 0) \ -} - -#endif diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h deleted file mode 100644 index 7d64e0e1a18b..000000000000 --- a/include/linux/v4l2-mediabus.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Media Bus API header - * - * Copyright (C) 2009, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __LINUX_V4L2_MEDIABUS_H -#define __LINUX_V4L2_MEDIABUS_H - -#include -#include - -/* - * These pixel codes uniquely identify data formats on the media bus. Mostly - * they correspond to similarly named V4L2_PIX_FMT_* formats, format 0 is - * reserved, V4L2_MBUS_FMT_FIXED shall be used by host-client pairs, where the - * data format is fixed. Additionally, "2X8" means that one pixel is transferred - * in two 8-bit samples, "BE" or "LE" specify in which order those samples are - * transferred over the bus: "LE" means that the least significant bits are - * transferred first, "BE" means that the most significant bits are transferred - * first, and "PADHI" and "PADLO" define which bits - low or high, in the - * incomplete high byte, are filled with padding bits. - * - * The pixel codes are grouped by type, bus_width, bits per component, samples - * per pixel and order of subsamples. Numerical values are sorted using generic - * numerical sort order (8 thus comes before 10). - * - * As their value can't change when a new pixel code is inserted in the - * enumeration, the pixel codes are explicitly given a numerical value. The next - * free values for each category are listed below, update them when inserting - * new pixel codes. - */ -enum v4l2_mbus_pixelcode { - V4L2_MBUS_FMT_FIXED = 0x0001, - - /* RGB - next is 0x1009 */ - V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001, - V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003, - V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE = 0x1004, - V4L2_MBUS_FMT_BGR565_2X8_BE = 0x1005, - V4L2_MBUS_FMT_BGR565_2X8_LE = 0x1006, - V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, - V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - - /* YUV (including grey) - next is 0x2014 */ - V4L2_MBUS_FMT_Y8_1X8 = 0x2001, - V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, - V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, - V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004, - V4L2_MBUS_FMT_YVYU8_1_5X8 = 0x2005, - V4L2_MBUS_FMT_UYVY8_2X8 = 0x2006, - V4L2_MBUS_FMT_VYUY8_2X8 = 0x2007, - V4L2_MBUS_FMT_YUYV8_2X8 = 0x2008, - V4L2_MBUS_FMT_YVYU8_2X8 = 0x2009, - V4L2_MBUS_FMT_Y10_1X10 = 0x200a, - V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b, - V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c, - V4L2_MBUS_FMT_Y12_1X12 = 0x2013, - V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f, - V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, - V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, - V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012, - V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, - V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, - - /* Bayer - next is 0x3015 */ - V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, - V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, - V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, - V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, - V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, - V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, - V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, - V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 = 0x300d, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_BE = 0x3003, - V4L2_MBUS_FMT_SBGGR10_2X8_PADHI_LE = 0x3004, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_BE = 0x3005, - V4L2_MBUS_FMT_SBGGR10_2X8_PADLO_LE = 0x3006, - V4L2_MBUS_FMT_SBGGR10_1X10 = 0x3007, - V4L2_MBUS_FMT_SGBRG10_1X10 = 0x300e, - V4L2_MBUS_FMT_SGRBG10_1X10 = 0x300a, - V4L2_MBUS_FMT_SRGGB10_1X10 = 0x300f, - V4L2_MBUS_FMT_SBGGR12_1X12 = 0x3008, - V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010, - V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011, - V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012, - - /* JPEG compressed formats - next is 0x4002 */ - V4L2_MBUS_FMT_JPEG_1X8 = 0x4001, - - /* Vendor specific formats - next is 0x5002 */ - - /* S5C73M3 sensor specific interleaved UYVY and JPEG */ - V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001, -}; - -/** - * struct v4l2_mbus_framefmt - frame format on the media bus - * @width: frame width - * @height: frame height - * @code: data format code (from enum v4l2_mbus_pixelcode) - * @field: used interlacing type (from enum v4l2_field) - * @colorspace: colorspace of the data (from enum v4l2_colorspace) - */ -struct v4l2_mbus_framefmt { - __u32 width; - __u32 height; - __u32 code; - __u32 field; - __u32 colorspace; - __u32 reserved[7]; -}; - -#endif diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h deleted file mode 100644 index a33c4daadce3..000000000000 --- a/include/linux/v4l2-subdev.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - * V4L2 subdev userspace API - * - * Copyright (C) 2010 Nokia Corporation - * - * Contacts: Laurent Pinchart - * Sakari Ailus - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_V4L2_SUBDEV_H -#define __LINUX_V4L2_SUBDEV_H - -#include -#include -#include -#include - -/** - * enum v4l2_subdev_format_whence - Media bus format type - * @V4L2_SUBDEV_FORMAT_TRY: try format, for negotiation only - * @V4L2_SUBDEV_FORMAT_ACTIVE: active format, applied to the device - */ -enum v4l2_subdev_format_whence { - V4L2_SUBDEV_FORMAT_TRY = 0, - V4L2_SUBDEV_FORMAT_ACTIVE = 1, -}; - -/** - * struct v4l2_subdev_format - Pad-level media bus format - * @which: format type (from enum v4l2_subdev_format_whence) - * @pad: pad number, as reported by the media API - * @format: media bus format (format code and frame size) - */ -struct v4l2_subdev_format { - __u32 which; - __u32 pad; - struct v4l2_mbus_framefmt format; - __u32 reserved[8]; -}; - -/** - * struct v4l2_subdev_crop - Pad-level crop settings - * @which: format type (from enum v4l2_subdev_format_whence) - * @pad: pad number, as reported by the media API - * @rect: pad crop rectangle boundaries - */ -struct v4l2_subdev_crop { - __u32 which; - __u32 pad; - struct v4l2_rect rect; - __u32 reserved[8]; -}; - -/** - * struct v4l2_subdev_mbus_code_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API - * @index: format index during enumeration - * @code: format code (from enum v4l2_mbus_pixelcode) - */ -struct v4l2_subdev_mbus_code_enum { - __u32 pad; - __u32 index; - __u32 code; - __u32 reserved[9]; -}; - -/** - * struct v4l2_subdev_frame_size_enum - Media bus format enumeration - * @pad: pad number, as reported by the media API - * @index: format index during enumeration - * @code: format code (from enum v4l2_mbus_pixelcode) - */ -struct v4l2_subdev_frame_size_enum { - __u32 index; - __u32 pad; - __u32 code; - __u32 min_width; - __u32 max_width; - __u32 min_height; - __u32 max_height; - __u32 reserved[9]; -}; - -/** - * struct v4l2_subdev_frame_interval - Pad-level frame rate - * @pad: pad number, as reported by the media API - * @interval: frame interval in seconds - */ -struct v4l2_subdev_frame_interval { - __u32 pad; - struct v4l2_fract interval; - __u32 reserved[9]; -}; - -/** - * struct v4l2_subdev_frame_interval_enum - Frame interval enumeration - * @pad: pad number, as reported by the media API - * @index: frame interval index during enumeration - * @code: format code (from enum v4l2_mbus_pixelcode) - * @width: frame width in pixels - * @height: frame height in pixels - * @interval: frame interval in seconds - */ -struct v4l2_subdev_frame_interval_enum { - __u32 index; - __u32 pad; - __u32 code; - __u32 width; - __u32 height; - struct v4l2_fract interval; - __u32 reserved[9]; -}; - -/** - * struct v4l2_subdev_selection - selection info - * - * @which: either V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY - * @pad: pad number, as reported by the media API - * @target: Selection target, used to choose one of possible rectangles, - * defined in v4l2-common.h; V4L2_SEL_TGT_* . - * @flags: constraint flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. - * @r: coordinates of the selection window - * @reserved: for future use, set to zero for now - * - * Hardware may use multiple helper windows to process a video stream. - * The structure is used to exchange this selection areas between - * an application and a driver. - */ -struct v4l2_subdev_selection { - __u32 which; - __u32 pad; - __u32 target; - __u32 flags; - struct v4l2_rect r; - __u32 reserved[8]; -}; - -struct v4l2_subdev_edid { - __u32 pad; - __u32 start_block; - __u32 blocks; - __u32 reserved[5]; - __u8 __user *edid; -}; - -#define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) -#define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) -#define VIDIOC_SUBDEV_G_FRAME_INTERVAL \ - _IOWR('V', 21, struct v4l2_subdev_frame_interval) -#define VIDIOC_SUBDEV_S_FRAME_INTERVAL \ - _IOWR('V', 22, struct v4l2_subdev_frame_interval) -#define VIDIOC_SUBDEV_ENUM_MBUS_CODE \ - _IOWR('V', 2, struct v4l2_subdev_mbus_code_enum) -#define VIDIOC_SUBDEV_ENUM_FRAME_SIZE \ - _IOWR('V', 74, struct v4l2_subdev_frame_size_enum) -#define VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL \ - _IOWR('V', 75, struct v4l2_subdev_frame_interval_enum) -#define VIDIOC_SUBDEV_G_CROP _IOWR('V', 59, struct v4l2_subdev_crop) -#define VIDIOC_SUBDEV_S_CROP _IOWR('V', 60, struct v4l2_subdev_crop) -#define VIDIOC_SUBDEV_G_SELECTION \ - _IOWR('V', 61, struct v4l2_subdev_selection) -#define VIDIOC_SUBDEV_S_SELECTION \ - _IOWR('V', 62, struct v4l2_subdev_selection) -#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 40, struct v4l2_subdev_edid) -#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 41, struct v4l2_subdev_edid) - -#endif diff --git a/include/linux/veth.h b/include/linux/veth.h deleted file mode 100644 index 3354c1eb424e..000000000000 --- a/include/linux/veth.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __NET_VETH_H_ -#define __NET_VETH_H_ - -enum { - VETH_INFO_UNSPEC, - VETH_INFO_PEER, - - __VETH_INFO_MAX -#define VETH_INFO_MAX (__VETH_INFO_MAX - 1) -}; - -#endif diff --git a/include/linux/vfio.h b/include/linux/vfio.h index 0a4f180a11d8..ab9e86224c54 100644 --- a/include/linux/vfio.h +++ b/include/linux/vfio.h @@ -11,15 +11,10 @@ #ifndef VFIO_H #define VFIO_H -#include -#include - -#define VFIO_API_VERSION 0 - -#ifdef __KERNEL__ /* Internal VFIO-core/bus driver API */ #include #include +#include /** * struct vfio_device_ops - VFIO bus driver device callbacks @@ -92,354 +87,4 @@ extern void vfio_unregister_iommu_driver( TYPE tmp; \ offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); }) \ -#endif /* __KERNEL__ */ - -/* Kernel & User level defines for VFIO IOCTLs. */ - -/* Extensions */ - -#define VFIO_TYPE1_IOMMU 1 - -/* - * The IOCTL interface is designed for extensibility by embedding the - * structure length (argsz) and flags into structures passed between - * kernel and userspace. We therefore use the _IO() macro for these - * defines to avoid implicitly embedding a size into the ioctl request. - * As structure fields are added, argsz will increase to match and flag - * bits will be defined to indicate additional fields with valid data. - * It's *always* the caller's responsibility to indicate the size of - * the structure passed by setting argsz appropriately. - */ - -#define VFIO_TYPE (';') -#define VFIO_BASE 100 - -/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ - -/** - * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) - * - * Report the version of the VFIO API. This allows us to bump the entire - * API version should we later need to add or change features in incompatible - * ways. - * Return: VFIO_API_VERSION - * Availability: Always - */ -#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) - -/** - * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) - * - * Check whether an extension is supported. - * Return: 0 if not supported, 1 (or some other positive integer) if supported. - * Availability: Always - */ -#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) - -/** - * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) - * - * Set the iommu to the given type. The type must be supported by an - * iommu driver as verified by calling CHECK_EXTENSION using the same - * type. A group must be set to this file descriptor before this - * ioctl is available. The IOMMU interfaces enabled by this call are - * specific to the value set. - * Return: 0 on success, -errno on failure - * Availability: When VFIO group attached - */ -#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) - -/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ - -/** - * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, - * struct vfio_group_status) - * - * Retrieve information about the group. Fills in provided - * struct vfio_group_info. Caller sets argsz. - * Return: 0 on succes, -errno on failure. - * Availability: Always - */ -struct vfio_group_status { - __u32 argsz; - __u32 flags; -#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) -#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) -}; -#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) - -/** - * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) - * - * Set the container for the VFIO group to the open VFIO file - * descriptor provided. Groups may only belong to a single - * container. Containers may, at their discretion, support multiple - * groups. Only when a container is set are all of the interfaces - * of the VFIO file descriptor and the VFIO group file descriptor - * available to the user. - * Return: 0 on success, -errno on failure. - * Availability: Always - */ -#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) - -/** - * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) - * - * Remove the group from the attached container. This is the - * opposite of the SET_CONTAINER call and returns the group to - * an initial state. All device file descriptors must be released - * prior to calling this interface. When removing the last group - * from a container, the IOMMU will be disabled and all state lost, - * effectively also returning the VFIO file descriptor to an initial - * state. - * Return: 0 on success, -errno on failure. - * Availability: When attached to container - */ -#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) - -/** - * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) - * - * Return a new file descriptor for the device object described by - * the provided string. The string should match a device listed in - * the devices subdirectory of the IOMMU group sysfs entry. The - * group containing the device must already be added to this context. - * Return: new file descriptor on success, -errno on failure. - * Availability: When attached to container - */ -#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) - -/* --------------- IOCTLs for DEVICE file descriptors --------------- */ - -/** - * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, - * struct vfio_device_info) - * - * Retrieve information about the device. Fills in provided - * struct vfio_device_info. Caller sets argsz. - * Return: 0 on success, -errno on failure. - */ -struct vfio_device_info { - __u32 argsz; - __u32 flags; -#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ -#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ - __u32 num_regions; /* Max region index + 1 */ - __u32 num_irqs; /* Max IRQ index + 1 */ -}; -#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) - -/** - * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, - * struct vfio_region_info) - * - * Retrieve information about a device region. Caller provides - * struct vfio_region_info with index value set. Caller sets argsz. - * Implementation of region mapping is bus driver specific. This is - * intended to describe MMIO, I/O port, as well as bus specific - * regions (ex. PCI config space). Zero sized regions may be used - * to describe unimplemented regions (ex. unimplemented PCI BARs). - * Return: 0 on success, -errno on failure. - */ -struct vfio_region_info { - __u32 argsz; - __u32 flags; -#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ -#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ -#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ - __u32 index; /* Region index */ - __u32 resv; /* Reserved for alignment */ - __u64 size; /* Region size (bytes) */ - __u64 offset; /* Region offset from start of device fd */ -}; -#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) - -/** - * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, - * struct vfio_irq_info) - * - * Retrieve information about a device IRQ. Caller provides - * struct vfio_irq_info with index value set. Caller sets argsz. - * Implementation of IRQ mapping is bus driver specific. Indexes - * using multiple IRQs are primarily intended to support MSI-like - * interrupt blocks. Zero count irq blocks may be used to describe - * unimplemented interrupt types. - * - * The EVENTFD flag indicates the interrupt index supports eventfd based - * signaling. - * - * The MASKABLE flags indicates the index supports MASK and UNMASK - * actions described below. - * - * AUTOMASKED indicates that after signaling, the interrupt line is - * automatically masked by VFIO and the user needs to unmask the line - * to receive new interrupts. This is primarily intended to distinguish - * level triggered interrupts. - * - * The NORESIZE flag indicates that the interrupt lines within the index - * are setup as a set and new subindexes cannot be enabled without first - * disabling the entire index. This is used for interrupts like PCI MSI - * and MSI-X where the driver may only use a subset of the available - * indexes, but VFIO needs to enable a specific number of vectors - * upfront. In the case of MSI-X, where the user can enable MSI-X and - * then add and unmask vectors, it's up to userspace to make the decision - * whether to allocate the maximum supported number of vectors or tear - * down setup and incrementally increase the vectors as each is enabled. - */ -struct vfio_irq_info { - __u32 argsz; - __u32 flags; -#define VFIO_IRQ_INFO_EVENTFD (1 << 0) -#define VFIO_IRQ_INFO_MASKABLE (1 << 1) -#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) -#define VFIO_IRQ_INFO_NORESIZE (1 << 3) - __u32 index; /* IRQ index */ - __u32 count; /* Number of IRQs within this index */ -}; -#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) - -/** - * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) - * - * Set signaling, masking, and unmasking of interrupts. Caller provides - * struct vfio_irq_set with all fields set. 'start' and 'count' indicate - * the range of subindexes being specified. - * - * The DATA flags specify the type of data provided. If DATA_NONE, the - * operation performs the specified action immediately on the specified - * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: - * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. - * - * DATA_BOOL allows sparse support for the same on arrays of interrupts. - * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): - * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, - * data = {1,0,1} - * - * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. - * A value of -1 can be used to either de-assign interrupts if already - * assigned or skip un-assigned interrupts. For example, to set an eventfd - * to be trigger for interrupts [0,0] and [0,2]: - * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, - * data = {fd1, -1, fd2} - * If index [0,1] is previously set, two count = 1 ioctls calls would be - * required to set [0,0] and [0,2] without changing [0,1]. - * - * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used - * with ACTION_TRIGGER to perform kernel level interrupt loopback testing - * from userspace (ie. simulate hardware triggering). - * - * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER - * enables the interrupt index for the device. Individual subindex interrupts - * can be disabled using the -1 value for DATA_EVENTFD or the index can be - * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. - * - * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while - * ACTION_TRIGGER specifies kernel->user signaling. - */ -struct vfio_irq_set { - __u32 argsz; - __u32 flags; -#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ -#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ -#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ -#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ -#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ -#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ - __u32 index; - __u32 start; - __u32 count; - __u8 data[]; -}; -#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) - -#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ - VFIO_IRQ_SET_DATA_BOOL | \ - VFIO_IRQ_SET_DATA_EVENTFD) -#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ - VFIO_IRQ_SET_ACTION_UNMASK | \ - VFIO_IRQ_SET_ACTION_TRIGGER) -/** - * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) - * - * Reset a device. - */ -#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) - -/* - * The VFIO-PCI bus driver makes use of the following fixed region and - * IRQ index mapping. Unimplemented regions return a size of zero. - * Unimplemented IRQ types return a count of zero. - */ - -enum { - VFIO_PCI_BAR0_REGION_INDEX, - VFIO_PCI_BAR1_REGION_INDEX, - VFIO_PCI_BAR2_REGION_INDEX, - VFIO_PCI_BAR3_REGION_INDEX, - VFIO_PCI_BAR4_REGION_INDEX, - VFIO_PCI_BAR5_REGION_INDEX, - VFIO_PCI_ROM_REGION_INDEX, - VFIO_PCI_CONFIG_REGION_INDEX, - VFIO_PCI_NUM_REGIONS -}; - -enum { - VFIO_PCI_INTX_IRQ_INDEX, - VFIO_PCI_MSI_IRQ_INDEX, - VFIO_PCI_MSIX_IRQ_INDEX, - VFIO_PCI_NUM_IRQS -}; - -/* -------- API for Type1 VFIO IOMMU -------- */ - -/** - * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) - * - * Retrieve information about the IOMMU object. Fills in provided - * struct vfio_iommu_info. Caller sets argsz. - * - * XXX Should we do these by CHECK_EXTENSION too? - */ -struct vfio_iommu_type1_info { - __u32 argsz; - __u32 flags; -#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ - __u64 iova_pgsizes; /* Bitmap of supported page sizes */ -}; - -#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) - -/** - * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) - * - * Map process virtual addresses to IO virtual addresses using the - * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. - */ -struct vfio_iommu_type1_dma_map { - __u32 argsz; - __u32 flags; -#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ -#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ - __u64 vaddr; /* Process virtual address */ - __u64 iova; /* IO virtual address */ - __u64 size; /* Size of mapping (bytes) */ -}; - -#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) - -/** - * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) - * - * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. - * Caller sets argsz. - */ -struct vfio_iommu_type1_dma_unmap { - __u32 argsz; - __u32 flags; - __u64 iova; /* IO virtual address */ - __u64 size; /* Size of mapping (bytes) */ -}; - -#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) - #endif /* VFIO_H */ diff --git a/include/linux/vhost.h b/include/linux/vhost.h deleted file mode 100644 index e847f1e30756..000000000000 --- a/include/linux/vhost.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef _LINUX_VHOST_H -#define _LINUX_VHOST_H -/* Userspace interface for in-kernel virtio accelerators. */ - -/* vhost is used to reduce the number of system calls involved in virtio. - * - * Existing virtio net code is used in the guest without modification. - * - * This header includes interface used by userspace hypervisor for - * device configuration. - */ - -#include -#include -#include -#include -#include - -struct vhost_vring_state { - unsigned int index; - unsigned int num; -}; - -struct vhost_vring_file { - unsigned int index; - int fd; /* Pass -1 to unbind from file. */ - -}; - -struct vhost_vring_addr { - unsigned int index; - /* Option flags. */ - unsigned int flags; - /* Flag values: */ - /* Whether log address is valid. If set enables logging. */ -#define VHOST_VRING_F_LOG 0 - - /* Start of array of descriptors (virtually contiguous) */ - __u64 desc_user_addr; - /* Used structure address. Must be 32 bit aligned */ - __u64 used_user_addr; - /* Available structure address. Must be 16 bit aligned */ - __u64 avail_user_addr; - /* Logging support. */ - /* Log writes to used structure, at offset calculated from specified - * address. Address must be 32 bit aligned. */ - __u64 log_guest_addr; -}; - -struct vhost_memory_region { - __u64 guest_phys_addr; - __u64 memory_size; /* bytes */ - __u64 userspace_addr; - __u64 flags_padding; /* No flags are currently specified. */ -}; - -/* All region addresses and sizes must be 4K aligned. */ -#define VHOST_PAGE_SIZE 0x1000 - -struct vhost_memory { - __u32 nregions; - __u32 padding; - struct vhost_memory_region regions[0]; -}; - -/* ioctls */ - -#define VHOST_VIRTIO 0xAF - -/* Features bitmask for forward compatibility. Transport bits are used for - * vhost specific features. */ -#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64) -#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64) - -/* Set current process as the (exclusive) owner of this file descriptor. This - * must be called before any other vhost command. Further calls to - * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */ -#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01) -/* Give up ownership, and reset the device to default values. - * Allows subsequent call to VHOST_OWNER_SET to succeed. */ -#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02) - -/* Set up/modify memory layout */ -#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory) - -/* Write logging setup. */ -/* Memory writes can optionally be logged by setting bit at an offset - * (calculated from the physical address) from specified log base. - * The bit is set using an atomic 32 bit operation. */ -/* Set base address for logging. */ -#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64) -/* Specify an eventfd file descriptor to signal on log write. */ -#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int) - -/* Ring setup. */ -/* Set number of descriptors in ring. This parameter can not - * be modified while ring is running (bound to a device). */ -#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state) -/* Set addresses for the ring. */ -#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr) -/* Base value where queue looks for available descriptors */ -#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state) -/* Get accessor: reads index, writes value in num */ -#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state) - -/* The following ioctls use eventfd file descriptors to signal and poll - * for events. */ - -/* Set eventfd to poll for added buffers */ -#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file) -/* Set eventfd to signal when buffers have beed used */ -#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file) -/* Set eventfd to signal an error */ -#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file) - -/* VHOST_NET specific defines */ - -/* Attach virtio net ring to a raw socket, or tap device. - * The socket must be already bound to an ethernet device, this device will be - * used for transmit. Pass fd -1 to unbind from the socket and the transmit - * device. This can be used to stop the ring (e.g. for migration). */ -#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file) - -/* Feature bits */ -/* Log all write descriptors. Can be changed while device is active. */ -#define VHOST_F_LOG_ALL 26 -/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ -#define VHOST_NET_F_VIRTIO_NET_HDR 27 - -#endif diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 873adbe82988..73ea2fb04731 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -56,1945 +56,7 @@ #ifndef __LINUX_VIDEODEV2_H #define __LINUX_VIDEODEV2_H -#ifdef __KERNEL__ #include /* need struct timeval */ -#else -#include -#endif -#include -#include -#include -#include -#include - -/* - * Common stuff for both V4L1 and V4L2 - * Moved from videodev.h - */ -#define VIDEO_MAX_FRAME 32 -#define VIDEO_MAX_PLANES 8 - -#ifndef __KERNEL__ - -/* These defines are V4L1 specific and should not be used with the V4L2 API! - They will be removed from this header in the future. */ - -#define VID_TYPE_CAPTURE 1 /* Can capture */ -#define VID_TYPE_TUNER 2 /* Can tune */ -#define VID_TYPE_TELETEXT 4 /* Does teletext */ -#define VID_TYPE_OVERLAY 8 /* Overlay onto frame buffer */ -#define VID_TYPE_CHROMAKEY 16 /* Overlay by chromakey */ -#define VID_TYPE_CLIPPING 32 /* Can clip */ -#define VID_TYPE_FRAMERAM 64 /* Uses the frame buffer memory */ -#define VID_TYPE_SCALES 128 /* Scalable */ -#define VID_TYPE_MONOCHROME 256 /* Monochrome only */ -#define VID_TYPE_SUBCAPTURE 512 /* Can capture subareas of the image */ -#define VID_TYPE_MPEG_DECODER 1024 /* Can decode MPEG streams */ -#define VID_TYPE_MPEG_ENCODER 2048 /* Can encode MPEG streams */ -#define VID_TYPE_MJPEG_DECODER 4096 /* Can decode MJPEG streams */ -#define VID_TYPE_MJPEG_ENCODER 8192 /* Can encode MJPEG streams */ -#endif - -/* - * M I S C E L L A N E O U S - */ - -/* Four-character-code (FOURCC) */ -#define v4l2_fourcc(a, b, c, d)\ - ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) - -/* - * E N U M S - */ -enum v4l2_field { - V4L2_FIELD_ANY = 0, /* driver can choose from none, - top, bottom, interlaced - depending on whatever it thinks - is approximate ... */ - V4L2_FIELD_NONE = 1, /* this device has no fields ... */ - V4L2_FIELD_TOP = 2, /* top field only */ - V4L2_FIELD_BOTTOM = 3, /* bottom field only */ - V4L2_FIELD_INTERLACED = 4, /* both fields interlaced */ - V4L2_FIELD_SEQ_TB = 5, /* both fields sequential into one - buffer, top-bottom order */ - V4L2_FIELD_SEQ_BT = 6, /* same as above + bottom-top order */ - V4L2_FIELD_ALTERNATE = 7, /* both fields alternating into - separate buffers */ - V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field - first and the top field is - transmitted first */ - V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field - first and the bottom field is - transmitted first */ -}; -#define V4L2_FIELD_HAS_TOP(field) \ - ((field) == V4L2_FIELD_TOP ||\ - (field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) -#define V4L2_FIELD_HAS_BOTTOM(field) \ - ((field) == V4L2_FIELD_BOTTOM ||\ - (field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) -#define V4L2_FIELD_HAS_BOTH(field) \ - ((field) == V4L2_FIELD_INTERLACED ||\ - (field) == V4L2_FIELD_INTERLACED_TB ||\ - (field) == V4L2_FIELD_INTERLACED_BT ||\ - (field) == V4L2_FIELD_SEQ_TB ||\ - (field) == V4L2_FIELD_SEQ_BT) - -enum v4l2_buf_type { - V4L2_BUF_TYPE_VIDEO_CAPTURE = 1, - V4L2_BUF_TYPE_VIDEO_OUTPUT = 2, - V4L2_BUF_TYPE_VIDEO_OVERLAY = 3, - V4L2_BUF_TYPE_VBI_CAPTURE = 4, - V4L2_BUF_TYPE_VBI_OUTPUT = 5, - V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, - V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, -#if 1 - /* Experimental */ - V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, -#endif - V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9, - V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE = 10, - /* Deprecated, do not use */ - V4L2_BUF_TYPE_PRIVATE = 0x80, -}; - -#define V4L2_TYPE_IS_MULTIPLANAR(type) \ - ((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) - -#define V4L2_TYPE_IS_OUTPUT(type) \ - ((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE \ - || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY \ - || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY \ - || (type) == V4L2_BUF_TYPE_VBI_OUTPUT \ - || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) - -enum v4l2_tuner_type { - V4L2_TUNER_RADIO = 1, - V4L2_TUNER_ANALOG_TV = 2, - V4L2_TUNER_DIGITAL_TV = 3, -}; - -enum v4l2_memory { - V4L2_MEMORY_MMAP = 1, - V4L2_MEMORY_USERPTR = 2, - V4L2_MEMORY_OVERLAY = 3, -}; - -/* see also http://vektor.theorem.ca/graphics/ycbcr/ */ -enum v4l2_colorspace { - /* ITU-R 601 -- broadcast NTSC/PAL */ - V4L2_COLORSPACE_SMPTE170M = 1, - - /* 1125-Line (US) HDTV */ - V4L2_COLORSPACE_SMPTE240M = 2, - - /* HD and modern captures. */ - V4L2_COLORSPACE_REC709 = 3, - - /* broken BT878 extents (601, luma range 16-253 instead of 16-235) */ - V4L2_COLORSPACE_BT878 = 4, - - /* These should be useful. Assume 601 extents. */ - V4L2_COLORSPACE_470_SYSTEM_M = 5, - V4L2_COLORSPACE_470_SYSTEM_BG = 6, - - /* I know there will be cameras that send this. So, this is - * unspecified chromaticities and full 0-255 on each of the - * Y'CbCr components - */ - V4L2_COLORSPACE_JPEG = 7, - - /* For RGB colourspaces, this is probably a good start. */ - V4L2_COLORSPACE_SRGB = 8, -}; - -enum v4l2_priority { - V4L2_PRIORITY_UNSET = 0, /* not initialized */ - V4L2_PRIORITY_BACKGROUND = 1, - V4L2_PRIORITY_INTERACTIVE = 2, - V4L2_PRIORITY_RECORD = 3, - V4L2_PRIORITY_DEFAULT = V4L2_PRIORITY_INTERACTIVE, -}; - -struct v4l2_rect { - __s32 left; - __s32 top; - __s32 width; - __s32 height; -}; - -struct v4l2_fract { - __u32 numerator; - __u32 denominator; -}; - -/** - * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP - * - * @driver: name of the driver module (e.g. "bttv") - * @card: name of the card (e.g. "Hauppauge WinTV") - * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) ) - * @version: KERNEL_VERSION - * @capabilities: capabilities of the physical device as a whole - * @device_caps: capabilities accessed via this particular device (node) - * @reserved: reserved fields for future extensions - */ -struct v4l2_capability { - __u8 driver[16]; - __u8 card[32]; - __u8 bus_info[32]; - __u32 version; - __u32 capabilities; - __u32 device_caps; - __u32 reserved[3]; -}; - -/* Values for 'capabilities' field */ -#define V4L2_CAP_VIDEO_CAPTURE 0x00000001 /* Is a video capture device */ -#define V4L2_CAP_VIDEO_OUTPUT 0x00000002 /* Is a video output device */ -#define V4L2_CAP_VIDEO_OVERLAY 0x00000004 /* Can do video overlay */ -#define V4L2_CAP_VBI_CAPTURE 0x00000010 /* Is a raw VBI capture device */ -#define V4L2_CAP_VBI_OUTPUT 0x00000020 /* Is a raw VBI output device */ -#define V4L2_CAP_SLICED_VBI_CAPTURE 0x00000040 /* Is a sliced VBI capture device */ -#define V4L2_CAP_SLICED_VBI_OUTPUT 0x00000080 /* Is a sliced VBI output device */ -#define V4L2_CAP_RDS_CAPTURE 0x00000100 /* RDS data capture */ -#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY 0x00000200 /* Can do video output overlay */ -#define V4L2_CAP_HW_FREQ_SEEK 0x00000400 /* Can do hardware frequency seek */ -#define V4L2_CAP_RDS_OUTPUT 0x00000800 /* Is an RDS encoder */ - -/* Is a video capture device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_CAPTURE_MPLANE 0x00001000 -/* Is a video output device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_OUTPUT_MPLANE 0x00002000 -/* Is a video mem-to-mem device that supports multiplanar formats */ -#define V4L2_CAP_VIDEO_M2M_MPLANE 0x00004000 -/* Is a video mem-to-mem device */ -#define V4L2_CAP_VIDEO_M2M 0x00008000 - -#define V4L2_CAP_TUNER 0x00010000 /* has a tuner */ -#define V4L2_CAP_AUDIO 0x00020000 /* has audio support */ -#define V4L2_CAP_RADIO 0x00040000 /* is a radio device */ -#define V4L2_CAP_MODULATOR 0x00080000 /* has a modulator */ - -#define V4L2_CAP_READWRITE 0x01000000 /* read/write systemcalls */ -#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ -#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ - -#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ - -/* - * V I D E O I M A G E F O R M A T - */ -struct v4l2_pix_format { - __u32 width; - __u32 height; - __u32 pixelformat; - __u32 field; /* enum v4l2_field */ - __u32 bytesperline; /* for padding, zero if unused */ - __u32 sizeimage; - __u32 colorspace; /* enum v4l2_colorspace */ - __u32 priv; /* private data, depends on pixelformat */ -}; - -/* Pixel format FOURCC depth Description */ - -/* RGB formats */ -#define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ -#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ -#define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ -#define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ -#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ -#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ -#define V4L2_PIX_FMT_BGR666 v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ -#define V4L2_PIX_FMT_BGR24 v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ -#define V4L2_PIX_FMT_RGB24 v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ -#define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ -#define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ - -/* Grey formats */ -#define V4L2_PIX_FMT_GREY v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ -#define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ -#define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ -#define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ -#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ -#define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ - -/* Grey bit-packed formats */ -#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ - -/* Palette formats */ -#define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ - -/* Luminance+Chrominance formats */ -#define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ -#define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ -#define V4L2_PIX_FMT_YUYV v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ -#define V4L2_PIX_FMT_UYVY v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_VYUY v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16 YUV 4:2:2 */ -#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16 YVU422 planar */ -#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16 YVU411 planar */ -#define V4L2_PIX_FMT_Y41P v4l2_fourcc('Y', '4', '1', 'P') /* 12 YUV 4:1:1 */ -#define V4L2_PIX_FMT_YUV444 v4l2_fourcc('Y', '4', '4', '4') /* 16 xxxxyyyy uuuuvvvv */ -#define V4L2_PIX_FMT_YUV555 v4l2_fourcc('Y', 'U', 'V', 'O') /* 16 YUV-5-5-5 */ -#define V4L2_PIX_FMT_YUV565 v4l2_fourcc('Y', 'U', 'V', 'P') /* 16 YUV-5-6-5 */ -#define V4L2_PIX_FMT_YUV32 v4l2_fourcc('Y', 'U', 'V', '4') /* 32 YUV-8-8-8-8 */ -#define V4L2_PIX_FMT_YUV410 v4l2_fourcc('Y', 'U', 'V', '9') /* 9 YUV 4:1:0 */ -#define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ -#define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ -#define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ -#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ - -/* two planes -- one Y, one Cr + Cb interleaved */ -#define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ -#define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */ -#define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */ -#define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */ -#define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */ -#define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */ - -/* two non contiguous planes - one Y, one Cr + Cb interleaved */ -#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */ -#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */ -#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */ -#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */ - -/* three non contiguous planes - Y, Cb, Cr */ -#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12 YUV420 planar */ -#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12 YVU420 planar */ - -/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */ -#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB8 v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */ -#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */ -#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12 BGBG.. GRGR.. */ -#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ -#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ -#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ - /* 10bit raw bayer DPCM compressed to 8 bits */ -#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') -#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') -#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') -#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8') - /* - * 10bit raw bayer, expanded to 16 bits - * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... - */ -#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ - -/* compressed formats */ -#define V4L2_PIX_FMT_MJPEG v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG */ -#define V4L2_PIX_FMT_JPEG v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG */ -#define V4L2_PIX_FMT_DV v4l2_fourcc('d', 'v', 's', 'd') /* 1394 */ -#define V4L2_PIX_FMT_MPEG v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */ -#define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */ -#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */ -#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */ -#define V4L2_PIX_FMT_H263 v4l2_fourcc('H', '2', '6', '3') /* H263 */ -#define V4L2_PIX_FMT_MPEG1 v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES */ -#define V4L2_PIX_FMT_MPEG2 v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES */ -#define V4L2_PIX_FMT_MPEG4 v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES */ -#define V4L2_PIX_FMT_XVID v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid */ -#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */ -#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */ -#define V4L2_PIX_FMT_VP8 v4l2_fourcc('V', 'P', '8', '0') /* VP8 */ - -/* Vendor-specific formats */ -#define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ -#define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ -#define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ -#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ -#define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ -#define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ -#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ -#define V4L2_PIX_FMT_SPCA501 v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */ -#define V4L2_PIX_FMT_SPCA505 v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */ -#define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ -#define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ -#define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ -#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ -#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */ -#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ -#define V4L2_PIX_FMT_SQ905C v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ -#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ -#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ -#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ -#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */ -#define V4L2_PIX_FMT_TM6000 v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ -#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ -#define V4L2_PIX_FMT_KONICA420 v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ -#define V4L2_PIX_FMT_JPGL v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */ -#define V4L2_PIX_FMT_SE401 v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */ -#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */ - -/* - * F O R M A T E N U M E R A T I O N - */ -struct v4l2_fmtdesc { - __u32 index; /* Format number */ - __u32 type; /* enum v4l2_buf_type */ - __u32 flags; - __u8 description[32]; /* Description string */ - __u32 pixelformat; /* Format fourcc */ - __u32 reserved[4]; -}; - -#define V4L2_FMT_FLAG_COMPRESSED 0x0001 -#define V4L2_FMT_FLAG_EMULATED 0x0002 - -#if 1 - /* Experimental Frame Size and frame rate enumeration */ -/* - * F R A M E S I Z E E N U M E R A T I O N - */ -enum v4l2_frmsizetypes { - V4L2_FRMSIZE_TYPE_DISCRETE = 1, - V4L2_FRMSIZE_TYPE_CONTINUOUS = 2, - V4L2_FRMSIZE_TYPE_STEPWISE = 3, -}; - -struct v4l2_frmsize_discrete { - __u32 width; /* Frame width [pixel] */ - __u32 height; /* Frame height [pixel] */ -}; - -struct v4l2_frmsize_stepwise { - __u32 min_width; /* Minimum frame width [pixel] */ - __u32 max_width; /* Maximum frame width [pixel] */ - __u32 step_width; /* Frame width step size [pixel] */ - __u32 min_height; /* Minimum frame height [pixel] */ - __u32 max_height; /* Maximum frame height [pixel] */ - __u32 step_height; /* Frame height step size [pixel] */ -}; - -struct v4l2_frmsizeenum { - __u32 index; /* Frame size number */ - __u32 pixel_format; /* Pixel format */ - __u32 type; /* Frame size type the device supports. */ - - union { /* Frame size */ - struct v4l2_frmsize_discrete discrete; - struct v4l2_frmsize_stepwise stepwise; - }; - - __u32 reserved[2]; /* Reserved space for future use */ -}; - -/* - * F R A M E R A T E E N U M E R A T I O N - */ -enum v4l2_frmivaltypes { - V4L2_FRMIVAL_TYPE_DISCRETE = 1, - V4L2_FRMIVAL_TYPE_CONTINUOUS = 2, - V4L2_FRMIVAL_TYPE_STEPWISE = 3, -}; - -struct v4l2_frmival_stepwise { - struct v4l2_fract min; /* Minimum frame interval [s] */ - struct v4l2_fract max; /* Maximum frame interval [s] */ - struct v4l2_fract step; /* Frame interval step size [s] */ -}; - -struct v4l2_frmivalenum { - __u32 index; /* Frame format index */ - __u32 pixel_format; /* Pixel format */ - __u32 width; /* Frame width */ - __u32 height; /* Frame height */ - __u32 type; /* Frame interval type the device supports. */ - - union { /* Frame interval */ - struct v4l2_fract discrete; - struct v4l2_frmival_stepwise stepwise; - }; - - __u32 reserved[2]; /* Reserved space for future use */ -}; -#endif - -/* - * T I M E C O D E - */ -struct v4l2_timecode { - __u32 type; - __u32 flags; - __u8 frames; - __u8 seconds; - __u8 minutes; - __u8 hours; - __u8 userbits[4]; -}; - -/* Type */ -#define V4L2_TC_TYPE_24FPS 1 -#define V4L2_TC_TYPE_25FPS 2 -#define V4L2_TC_TYPE_30FPS 3 -#define V4L2_TC_TYPE_50FPS 4 -#define V4L2_TC_TYPE_60FPS 5 - -/* Flags */ -#define V4L2_TC_FLAG_DROPFRAME 0x0001 /* "drop-frame" mode */ -#define V4L2_TC_FLAG_COLORFRAME 0x0002 -#define V4L2_TC_USERBITS_field 0x000C -#define V4L2_TC_USERBITS_USERDEFINED 0x0000 -#define V4L2_TC_USERBITS_8BITCHARS 0x0008 -/* The above is based on SMPTE timecodes */ - -struct v4l2_jpegcompression { - int quality; - - int APPn; /* Number of APP segment to be written, - * must be 0..15 */ - int APP_len; /* Length of data in JPEG APPn segment */ - char APP_data[60]; /* Data in the JPEG APPn segment. */ - - int COM_len; /* Length of data in JPEG COM segment */ - char COM_data[60]; /* Data in JPEG COM segment */ - - __u32 jpeg_markers; /* Which markers should go into the JPEG - * output. Unless you exactly know what - * you do, leave them untouched. - * Inluding less markers will make the - * resulting code smaller, but there will - * be fewer applications which can read it. - * The presence of the APP and COM marker - * is influenced by APP_len and COM_len - * ONLY, not by this property! */ - -#define V4L2_JPEG_MARKER_DHT (1<<3) /* Define Huffman Tables */ -#define V4L2_JPEG_MARKER_DQT (1<<4) /* Define Quantization Tables */ -#define V4L2_JPEG_MARKER_DRI (1<<5) /* Define Restart Interval */ -#define V4L2_JPEG_MARKER_COM (1<<6) /* Comment segment */ -#define V4L2_JPEG_MARKER_APP (1<<7) /* App segment, driver will - * allways use APP0 */ -}; - -/* - * M E M O R Y - M A P P I N G B U F F E R S - */ -struct v4l2_requestbuffers { - __u32 count; - __u32 type; /* enum v4l2_buf_type */ - __u32 memory; /* enum v4l2_memory */ - __u32 reserved[2]; -}; - -/** - * struct v4l2_plane - plane info for multi-planar buffers - * @bytesused: number of bytes occupied by data in the plane (payload) - * @length: size of this plane (NOT the payload) in bytes - * @mem_offset: when memory in the associated struct v4l2_buffer is - * V4L2_MEMORY_MMAP, equals the offset from the start of - * the device memory for this plane (or is a "cookie" that - * should be passed to mmap() called on the video node) - * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer - * pointing to this plane - * @data_offset: offset in the plane to the start of data; usually 0, - * unless there is a header in front of the data - * - * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer - * with two planes can have one plane for Y, and another for interleaved CbCr - * components. Each plane can reside in a separate memory buffer, or even in - * a completely separate memory node (e.g. in embedded devices). - */ -struct v4l2_plane { - __u32 bytesused; - __u32 length; - union { - __u32 mem_offset; - unsigned long userptr; - } m; - __u32 data_offset; - __u32 reserved[11]; -}; - -/** - * struct v4l2_buffer - video buffer info - * @index: id number of the buffer - * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for - * multiplanar buffers); - * @bytesused: number of bytes occupied by data in the buffer (payload); - * unused (set to 0) for multiplanar buffers - * @flags: buffer informational flags - * @field: enum v4l2_field; field order of the image in the buffer - * @timestamp: frame timestamp - * @timecode: frame timecode - * @sequence: sequence count of this frame - * @memory: enum v4l2_memory; the method, in which the actual video data is - * passed - * @offset: for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP; - * offset from the start of the device memory for this plane, - * (or a "cookie" that should be passed to mmap() as offset) - * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; - * a userspace pointer pointing to this buffer - * @planes: for multiplanar buffers; userspace pointer to the array of plane - * info structs for this buffer - * @length: size in bytes of the buffer (NOT its payload) for single-plane - * buffers (when type != *_MPLANE); number of elements in the - * planes array for multi-plane buffers - * @input: input number from which the video data has has been captured - * - * Contains data exchanged by application and driver using one of the Streaming - * I/O methods. - */ -struct v4l2_buffer { - __u32 index; - __u32 type; - __u32 bytesused; - __u32 flags; - __u32 field; - struct timeval timestamp; - struct v4l2_timecode timecode; - __u32 sequence; - - /* memory location */ - __u32 memory; - union { - __u32 offset; - unsigned long userptr; - struct v4l2_plane *planes; - } m; - __u32 length; - __u32 reserved2; - __u32 reserved; -}; - -/* Flags for 'flags' field */ -#define V4L2_BUF_FLAG_MAPPED 0x0001 /* Buffer is mapped (flag) */ -#define V4L2_BUF_FLAG_QUEUED 0x0002 /* Buffer is queued for processing */ -#define V4L2_BUF_FLAG_DONE 0x0004 /* Buffer is ready */ -#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ -#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ -#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ -/* Buffer is ready, but the data contained within is corrupted. */ -#define V4L2_BUF_FLAG_ERROR 0x0040 -#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ -#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */ -/* Cache handling flags */ -#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 -#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 - -/* - * O V E R L A Y P R E V I E W - */ -struct v4l2_framebuffer { - __u32 capability; - __u32 flags; -/* FIXME: in theory we should pass something like PCI device + memory - * region + offset instead of some physical address */ - void *base; - struct v4l2_pix_format fmt; -}; -/* Flags for the 'capability' field. Read only */ -#define V4L2_FBUF_CAP_EXTERNOVERLAY 0x0001 -#define V4L2_FBUF_CAP_CHROMAKEY 0x0002 -#define V4L2_FBUF_CAP_LIST_CLIPPING 0x0004 -#define V4L2_FBUF_CAP_BITMAP_CLIPPING 0x0008 -#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010 -#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020 -#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040 -#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080 -/* Flags for the 'flags' field. */ -#define V4L2_FBUF_FLAG_PRIMARY 0x0001 -#define V4L2_FBUF_FLAG_OVERLAY 0x0002 -#define V4L2_FBUF_FLAG_CHROMAKEY 0x0004 -#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008 -#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010 -#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020 -#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040 - -struct v4l2_clip { - struct v4l2_rect c; - struct v4l2_clip __user *next; -}; - -struct v4l2_window { - struct v4l2_rect w; - __u32 field; /* enum v4l2_field */ - __u32 chromakey; - struct v4l2_clip __user *clips; - __u32 clipcount; - void __user *bitmap; - __u8 global_alpha; -}; - -/* - * C A P T U R E P A R A M E T E R S - */ -struct v4l2_captureparm { - __u32 capability; /* Supported modes */ - __u32 capturemode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in .1us units */ - __u32 extendedmode; /* Driver-specific extensions */ - __u32 readbuffers; /* # of buffers for read */ - __u32 reserved[4]; -}; - -/* Flags for 'capability' and 'capturemode' fields */ -#define V4L2_MODE_HIGHQUALITY 0x0001 /* High quality imaging mode */ -#define V4L2_CAP_TIMEPERFRAME 0x1000 /* timeperframe field is supported */ - -struct v4l2_outputparm { - __u32 capability; /* Supported modes */ - __u32 outputmode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in seconds */ - __u32 extendedmode; /* Driver-specific extensions */ - __u32 writebuffers; /* # of buffers for write */ - __u32 reserved[4]; -}; - -/* - * I N P U T I M A G E C R O P P I N G - */ -struct v4l2_cropcap { - __u32 type; /* enum v4l2_buf_type */ - struct v4l2_rect bounds; - struct v4l2_rect defrect; - struct v4l2_fract pixelaspect; -}; - -struct v4l2_crop { - __u32 type; /* enum v4l2_buf_type */ - struct v4l2_rect c; -}; - -/** - * struct v4l2_selection - selection info - * @type: buffer type (do not use *_MPLANE types) - * @target: Selection target, used to choose one of possible rectangles; - * defined in v4l2-common.h; V4L2_SEL_TGT_* . - * @flags: constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*. - * @r: coordinates of selection window - * @reserved: for future use, rounds structure size to 64 bytes, set to zero - * - * Hardware may use multiple helper windows to process a video stream. - * The structure is used to exchange this selection areas between - * an application and a driver. - */ -struct v4l2_selection { - __u32 type; - __u32 target; - __u32 flags; - struct v4l2_rect r; - __u32 reserved[9]; -}; - - -/* - * A N A L O G V I D E O S T A N D A R D - */ - -typedef __u64 v4l2_std_id; - -/* one bit for each */ -#define V4L2_STD_PAL_B ((v4l2_std_id)0x00000001) -#define V4L2_STD_PAL_B1 ((v4l2_std_id)0x00000002) -#define V4L2_STD_PAL_G ((v4l2_std_id)0x00000004) -#define V4L2_STD_PAL_H ((v4l2_std_id)0x00000008) -#define V4L2_STD_PAL_I ((v4l2_std_id)0x00000010) -#define V4L2_STD_PAL_D ((v4l2_std_id)0x00000020) -#define V4L2_STD_PAL_D1 ((v4l2_std_id)0x00000040) -#define V4L2_STD_PAL_K ((v4l2_std_id)0x00000080) - -#define V4L2_STD_PAL_M ((v4l2_std_id)0x00000100) -#define V4L2_STD_PAL_N ((v4l2_std_id)0x00000200) -#define V4L2_STD_PAL_Nc ((v4l2_std_id)0x00000400) -#define V4L2_STD_PAL_60 ((v4l2_std_id)0x00000800) - -#define V4L2_STD_NTSC_M ((v4l2_std_id)0x00001000) /* BTSC */ -#define V4L2_STD_NTSC_M_JP ((v4l2_std_id)0x00002000) /* EIA-J */ -#define V4L2_STD_NTSC_443 ((v4l2_std_id)0x00004000) -#define V4L2_STD_NTSC_M_KR ((v4l2_std_id)0x00008000) /* FM A2 */ - -#define V4L2_STD_SECAM_B ((v4l2_std_id)0x00010000) -#define V4L2_STD_SECAM_D ((v4l2_std_id)0x00020000) -#define V4L2_STD_SECAM_G ((v4l2_std_id)0x00040000) -#define V4L2_STD_SECAM_H ((v4l2_std_id)0x00080000) -#define V4L2_STD_SECAM_K ((v4l2_std_id)0x00100000) -#define V4L2_STD_SECAM_K1 ((v4l2_std_id)0x00200000) -#define V4L2_STD_SECAM_L ((v4l2_std_id)0x00400000) -#define V4L2_STD_SECAM_LC ((v4l2_std_id)0x00800000) - -/* ATSC/HDTV */ -#define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) -#define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) - -/* FIXME: - Although std_id is 64 bits, there is an issue on PPC32 architecture that - makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding - this value to 32 bits. - As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), - it should work fine. However, if needed to add more than two standards, - v4l2-common.c should be fixed. - */ - -/* - * Some macros to merge video standards in order to make live easier for the - * drivers and V4L2 applications - */ - -/* - * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is - * Missing here. - */ -#define V4L2_STD_NTSC (V4L2_STD_NTSC_M |\ - V4L2_STD_NTSC_M_JP |\ - V4L2_STD_NTSC_M_KR) -/* Secam macros */ -#define V4L2_STD_SECAM_DK (V4L2_STD_SECAM_D |\ - V4L2_STD_SECAM_K |\ - V4L2_STD_SECAM_K1) -/* All Secam Standards */ -#define V4L2_STD_SECAM (V4L2_STD_SECAM_B |\ - V4L2_STD_SECAM_G |\ - V4L2_STD_SECAM_H |\ - V4L2_STD_SECAM_DK |\ - V4L2_STD_SECAM_L |\ - V4L2_STD_SECAM_LC) -/* PAL macros */ -#define V4L2_STD_PAL_BG (V4L2_STD_PAL_B |\ - V4L2_STD_PAL_B1 |\ - V4L2_STD_PAL_G) -#define V4L2_STD_PAL_DK (V4L2_STD_PAL_D |\ - V4L2_STD_PAL_D1 |\ - V4L2_STD_PAL_K) -/* - * "Common" PAL - This macro is there to be compatible with the old - * V4L1 concept of "PAL": /BGDKHI. - * Several PAL standards are mising here: /M, /N and /Nc - */ -#define V4L2_STD_PAL (V4L2_STD_PAL_BG |\ - V4L2_STD_PAL_DK |\ - V4L2_STD_PAL_H |\ - V4L2_STD_PAL_I) -/* Chroma "agnostic" standards */ -#define V4L2_STD_B (V4L2_STD_PAL_B |\ - V4L2_STD_PAL_B1 |\ - V4L2_STD_SECAM_B) -#define V4L2_STD_G (V4L2_STD_PAL_G |\ - V4L2_STD_SECAM_G) -#define V4L2_STD_H (V4L2_STD_PAL_H |\ - V4L2_STD_SECAM_H) -#define V4L2_STD_L (V4L2_STD_SECAM_L |\ - V4L2_STD_SECAM_LC) -#define V4L2_STD_GH (V4L2_STD_G |\ - V4L2_STD_H) -#define V4L2_STD_DK (V4L2_STD_PAL_DK |\ - V4L2_STD_SECAM_DK) -#define V4L2_STD_BG (V4L2_STD_B |\ - V4L2_STD_G) -#define V4L2_STD_MN (V4L2_STD_PAL_M |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc |\ - V4L2_STD_NTSC) - -/* Standards where MTS/BTSC stereo could be found */ -#define V4L2_STD_MTS (V4L2_STD_NTSC_M |\ - V4L2_STD_PAL_M |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc) - -/* Standards for Countries with 60Hz Line frequency */ -#define V4L2_STD_525_60 (V4L2_STD_PAL_M |\ - V4L2_STD_PAL_60 |\ - V4L2_STD_NTSC |\ - V4L2_STD_NTSC_443) -/* Standards for Countries with 50Hz Line frequency */ -#define V4L2_STD_625_50 (V4L2_STD_PAL |\ - V4L2_STD_PAL_N |\ - V4L2_STD_PAL_Nc |\ - V4L2_STD_SECAM) - -#define V4L2_STD_ATSC (V4L2_STD_ATSC_8_VSB |\ - V4L2_STD_ATSC_16_VSB) -/* Macros with none and all analog standards */ -#define V4L2_STD_UNKNOWN 0 -#define V4L2_STD_ALL (V4L2_STD_525_60 |\ - V4L2_STD_625_50) - -struct v4l2_standard { - __u32 index; - v4l2_std_id id; - __u8 name[24]; - struct v4l2_fract frameperiod; /* Frames, not fields */ - __u32 framelines; - __u32 reserved[4]; -}; - -/* The DV Preset API is deprecated in favor of the DV Timings API. - New drivers shouldn't use this anymore! */ - -/* - * V I D E O T I M I N G S D V P R E S E T - */ -struct v4l2_dv_preset { - __u32 preset; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T S E N U M E R A T I O N - */ -struct v4l2_dv_enum_preset { - __u32 index; - __u32 preset; - __u8 name[32]; /* Name of the preset timing */ - __u32 width; - __u32 height; - __u32 reserved[4]; -}; - -/* - * D V P R E S E T V A L U E S - */ -#define V4L2_DV_INVALID 0 -#define V4L2_DV_480P59_94 1 /* BT.1362 */ -#define V4L2_DV_576P50 2 /* BT.1362 */ -#define V4L2_DV_720P24 3 /* SMPTE 296M */ -#define V4L2_DV_720P25 4 /* SMPTE 296M */ -#define V4L2_DV_720P30 5 /* SMPTE 296M */ -#define V4L2_DV_720P50 6 /* SMPTE 296M */ -#define V4L2_DV_720P59_94 7 /* SMPTE 274M */ -#define V4L2_DV_720P60 8 /* SMPTE 274M/296M */ -#define V4L2_DV_1080I29_97 9 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I30 10 /* BT.1120/ SMPTE 274M */ -#define V4L2_DV_1080I25 11 /* BT.1120 */ -#define V4L2_DV_1080I50 12 /* SMPTE 296M */ -#define V4L2_DV_1080I60 13 /* SMPTE 296M */ -#define V4L2_DV_1080P24 14 /* SMPTE 296M */ -#define V4L2_DV_1080P25 15 /* SMPTE 296M */ -#define V4L2_DV_1080P30 16 /* SMPTE 296M */ -#define V4L2_DV_1080P50 17 /* BT.1120 */ -#define V4L2_DV_1080P60 18 /* BT.1120 */ - -/* - * D V B T T I M I N G S - */ - -/** struct v4l2_bt_timings - BT.656/BT.1120 timing data - * @width: total width of the active video in pixels - * @height: total height of the active video in lines - * @interlaced: Interlaced or progressive - * @polarities: Positive or negative polarities - * @pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @hfrontporch:Horizontal front porch in pixels - * @hsync: Horizontal Sync length in pixels - * @hbackporch: Horizontal back porch in pixels - * @vfrontporch:Vertical front porch in lines - * @vsync: Vertical Sync length in lines - * @vbackporch: Vertical back porch in lines - * @il_vfrontporch:Vertical front porch for the even field - * (aka field 2) of interlaced field formats - * @il_vsync: Vertical Sync length for the even field - * (aka field 2) of interlaced field formats - * @il_vbackporch:Vertical back porch for the even field - * (aka field 2) of interlaced field formats - * @standards: Standards the timing belongs to - * @flags: Flags - * @reserved: Reserved fields, must be zeroed. - * - * A note regarding vertical interlaced timings: height refers to the total - * height of the active video frame (= two fields). The blanking timings refer - * to the blanking of each field. So the height of the total frame is - * calculated as follows: - * - * tot_height = height + vfrontporch + vsync + vbackporch + - * il_vfrontporch + il_vsync + il_vbackporch - * - * The active height of each field is height / 2. - */ -struct v4l2_bt_timings { - __u32 width; - __u32 height; - __u32 interlaced; - __u32 polarities; - __u64 pixelclock; - __u32 hfrontporch; - __u32 hsync; - __u32 hbackporch; - __u32 vfrontporch; - __u32 vsync; - __u32 vbackporch; - __u32 il_vfrontporch; - __u32 il_vsync; - __u32 il_vbackporch; - __u32 standards; - __u32 flags; - __u32 reserved[14]; -} __attribute__ ((packed)); - -/* Interlaced or progressive format */ -#define V4L2_DV_PROGRESSIVE 0 -#define V4L2_DV_INTERLACED 1 - -/* Polarities. If bit is not set, it is assumed to be negative polarity */ -#define V4L2_DV_VSYNC_POS_POL 0x00000001 -#define V4L2_DV_HSYNC_POS_POL 0x00000002 - -/* Timings standards */ -#define V4L2_DV_BT_STD_CEA861 (1 << 0) /* CEA-861 Digital TV Profile */ -#define V4L2_DV_BT_STD_DMT (1 << 1) /* VESA Discrete Monitor Timings */ -#define V4L2_DV_BT_STD_CVT (1 << 2) /* VESA Coordinated Video Timings */ -#define V4L2_DV_BT_STD_GTF (1 << 3) /* VESA Generalized Timings Formula */ - -/* Flags */ - -/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary - GTF' curve (GTF). In both cases the horizontal and/or vertical blanking - intervals are reduced, allowing a higher resolution over the same - bandwidth. This is a read-only flag. */ -#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0) -/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple - of six. These formats can be optionally played at 1 / 1.001 speed. - This is a read-only flag. */ -#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1) -/* CEA-861 specific: only valid for video transmitters, the flag is cleared - by receivers. - If the framerate of the format is a multiple of six, then the pixelclock - used to set up the transmitter is divided by 1.001 to make it compatible - with 60 Hz based standards such as NTSC and PAL-M that use a framerate of - 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate - such frequencies, then the flag will also be cleared. */ -#define V4L2_DV_FL_REDUCED_FPS (1 << 2) -/* Specific to interlaced formats: if set, then field 1 is really one half-line - longer and field 2 is really one half-line shorter, so each field has - exactly the same number of half-lines. Whether half-lines can be detected - or used depends on the hardware. */ -#define V4L2_DV_FL_HALF_LINE (1 << 0) - - -/** struct v4l2_dv_timings - DV timings - * @type: the type of the timings - * @bt: BT656/1120 timings - */ -struct v4l2_dv_timings { - __u32 type; - union { - struct v4l2_bt_timings bt; - __u32 reserved[32]; - }; -} __attribute__ ((packed)); - -/* Values for the type field */ -#define V4L2_DV_BT_656_1120 0 /* BT.656/1120 timing type */ - - -/** struct v4l2_enum_dv_timings - DV timings enumeration - * @index: enumeration index - * @reserved: must be zeroed - * @timings: the timings for the given index - */ -struct v4l2_enum_dv_timings { - __u32 index; - __u32 reserved[3]; - struct v4l2_dv_timings timings; -}; - -/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities - * @min_width: width in pixels - * @max_width: width in pixels - * @min_height: height in lines - * @max_height: height in lines - * @min_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @max_pixelclock: Pixel clock in HZ. Ex. 74.25MHz->74250000 - * @standards: Supported standards - * @capabilities: Supported capabilities - * @reserved: Must be zeroed - */ -struct v4l2_bt_timings_cap { - __u32 min_width; - __u32 max_width; - __u32 min_height; - __u32 max_height; - __u64 min_pixelclock; - __u64 max_pixelclock; - __u32 standards; - __u32 capabilities; - __u32 reserved[16]; -} __attribute__ ((packed)); - -/* Supports interlaced formats */ -#define V4L2_DV_BT_CAP_INTERLACED (1 << 0) -/* Supports progressive formats */ -#define V4L2_DV_BT_CAP_PROGRESSIVE (1 << 1) -/* Supports CVT/GTF reduced blanking */ -#define V4L2_DV_BT_CAP_REDUCED_BLANKING (1 << 2) -/* Supports custom formats */ -#define V4L2_DV_BT_CAP_CUSTOM (1 << 3) - -/** struct v4l2_dv_timings_cap - DV timings capabilities - * @type: the type of the timings (same as in struct v4l2_dv_timings) - * @bt: the BT656/1120 timings capabilities - */ -struct v4l2_dv_timings_cap { - __u32 type; - __u32 reserved[3]; - union { - struct v4l2_bt_timings_cap bt; - __u32 raw_data[32]; - }; -}; - - -/* - * V I D E O I N P U T S - */ -struct v4l2_input { - __u32 index; /* Which input */ - __u8 name[32]; /* Label */ - __u32 type; /* Type of input */ - __u32 audioset; /* Associated audios (bitfield) */ - __u32 tuner; /* enum v4l2_tuner_type */ - v4l2_std_id std; - __u32 status; - __u32 capabilities; - __u32 reserved[3]; -}; - -/* Values for the 'type' field */ -#define V4L2_INPUT_TYPE_TUNER 1 -#define V4L2_INPUT_TYPE_CAMERA 2 - -/* field 'status' - general */ -#define V4L2_IN_ST_NO_POWER 0x00000001 /* Attached device is off */ -#define V4L2_IN_ST_NO_SIGNAL 0x00000002 -#define V4L2_IN_ST_NO_COLOR 0x00000004 - -/* field 'status' - sensor orientation */ -/* If sensor is mounted upside down set both bits */ -#define V4L2_IN_ST_HFLIP 0x00000010 /* Frames are flipped horizontally */ -#define V4L2_IN_ST_VFLIP 0x00000020 /* Frames are flipped vertically */ - -/* field 'status' - analog */ -#define V4L2_IN_ST_NO_H_LOCK 0x00000100 /* No horizontal sync lock */ -#define V4L2_IN_ST_COLOR_KILL 0x00000200 /* Color killer is active */ - -/* field 'status' - digital */ -#define V4L2_IN_ST_NO_SYNC 0x00010000 /* No synchronization lock */ -#define V4L2_IN_ST_NO_EQU 0x00020000 /* No equalizer lock */ -#define V4L2_IN_ST_NO_CARRIER 0x00040000 /* Carrier recovery failed */ - -/* field 'status' - VCR and set-top box */ -#define V4L2_IN_ST_MACROVISION 0x01000000 /* Macrovision detected */ -#define V4L2_IN_ST_NO_ACCESS 0x02000000 /* Conditional access denied */ -#define V4L2_IN_ST_VTR 0x04000000 /* VTR time constant */ - -/* capabilities flags */ -#define V4L2_IN_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ -#define V4L2_IN_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ -#define V4L2_IN_CAP_CUSTOM_TIMINGS V4L2_IN_CAP_DV_TIMINGS /* For compatibility */ -#define V4L2_IN_CAP_STD 0x00000004 /* Supports S_STD */ - -/* - * V I D E O O U T P U T S - */ -struct v4l2_output { - __u32 index; /* Which output */ - __u8 name[32]; /* Label */ - __u32 type; /* Type of output */ - __u32 audioset; /* Associated audios (bitfield) */ - __u32 modulator; /* Associated modulator */ - v4l2_std_id std; - __u32 capabilities; - __u32 reserved[3]; -}; -/* Values for the 'type' field */ -#define V4L2_OUTPUT_TYPE_MODULATOR 1 -#define V4L2_OUTPUT_TYPE_ANALOG 2 -#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY 3 - -/* capabilities flags */ -#define V4L2_OUT_CAP_PRESETS 0x00000001 /* Supports S_DV_PRESET */ -#define V4L2_OUT_CAP_DV_TIMINGS 0x00000002 /* Supports S_DV_TIMINGS */ -#define V4L2_OUT_CAP_CUSTOM_TIMINGS V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */ -#define V4L2_OUT_CAP_STD 0x00000004 /* Supports S_STD */ - -/* - * C O N T R O L S - */ -struct v4l2_control { - __u32 id; - __s32 value; -}; - -struct v4l2_ext_control { - __u32 id; - __u32 size; - __u32 reserved2[1]; - union { - __s32 value; - __s64 value64; - char *string; - }; -} __attribute__ ((packed)); - -struct v4l2_ext_controls { - __u32 ctrl_class; - __u32 count; - __u32 error_idx; - __u32 reserved[2]; - struct v4l2_ext_control *controls; -}; - -#define V4L2_CTRL_ID_MASK (0x0fffffff) -#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) -#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) - -enum v4l2_ctrl_type { - V4L2_CTRL_TYPE_INTEGER = 1, - V4L2_CTRL_TYPE_BOOLEAN = 2, - V4L2_CTRL_TYPE_MENU = 3, - V4L2_CTRL_TYPE_BUTTON = 4, - V4L2_CTRL_TYPE_INTEGER64 = 5, - V4L2_CTRL_TYPE_CTRL_CLASS = 6, - V4L2_CTRL_TYPE_STRING = 7, - V4L2_CTRL_TYPE_BITMASK = 8, - V4L2_CTRL_TYPE_INTEGER_MENU = 9, -}; - -/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ -struct v4l2_queryctrl { - __u32 id; - __u32 type; /* enum v4l2_ctrl_type */ - __u8 name[32]; /* Whatever */ - __s32 minimum; /* Note signedness */ - __s32 maximum; - __s32 step; - __s32 default_value; - __u32 flags; - __u32 reserved[2]; -}; - -/* Used in the VIDIOC_QUERYMENU ioctl for querying menu items */ -struct v4l2_querymenu { - __u32 id; - __u32 index; - union { - __u8 name[32]; /* Whatever */ - __s64 value; - }; - __u32 reserved; -} __attribute__ ((packed)); - -/* Control flags */ -#define V4L2_CTRL_FLAG_DISABLED 0x0001 -#define V4L2_CTRL_FLAG_GRABBED 0x0002 -#define V4L2_CTRL_FLAG_READ_ONLY 0x0004 -#define V4L2_CTRL_FLAG_UPDATE 0x0008 -#define V4L2_CTRL_FLAG_INACTIVE 0x0010 -#define V4L2_CTRL_FLAG_SLIDER 0x0020 -#define V4L2_CTRL_FLAG_WRITE_ONLY 0x0040 -#define V4L2_CTRL_FLAG_VOLATILE 0x0080 - -/* Query flag, to be ORed with the control ID */ -#define V4L2_CTRL_FLAG_NEXT_CTRL 0x80000000 - -/* User-class control IDs defined by V4L2 */ -#define V4L2_CID_MAX_CTRLS 1024 -/* IDs reserved for driver specific controls */ -#define V4L2_CID_PRIVATE_BASE 0x08000000 - - -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - -/* - * T U N I N G - */ -struct v4l2_tuner { - __u32 index; - __u8 name[32]; - __u32 type; /* enum v4l2_tuner_type */ - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 rxsubchans; - __u32 audmode; - __s32 signal; - __s32 afc; - __u32 reserved[4]; -}; - -struct v4l2_modulator { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 txsubchans; - __u32 reserved[4]; -}; - -/* Flags for the 'capability' field */ -#define V4L2_TUNER_CAP_LOW 0x0001 -#define V4L2_TUNER_CAP_NORM 0x0002 -#define V4L2_TUNER_CAP_HWSEEK_BOUNDED 0x0004 -#define V4L2_TUNER_CAP_HWSEEK_WRAP 0x0008 -#define V4L2_TUNER_CAP_STEREO 0x0010 -#define V4L2_TUNER_CAP_LANG2 0x0020 -#define V4L2_TUNER_CAP_SAP 0x0020 -#define V4L2_TUNER_CAP_LANG1 0x0040 -#define V4L2_TUNER_CAP_RDS 0x0080 -#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 -#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 -#define V4L2_TUNER_CAP_FREQ_BANDS 0x0400 -#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM 0x0800 - -/* Flags for the 'rxsubchans' field */ -#define V4L2_TUNER_SUB_MONO 0x0001 -#define V4L2_TUNER_SUB_STEREO 0x0002 -#define V4L2_TUNER_SUB_LANG2 0x0004 -#define V4L2_TUNER_SUB_SAP 0x0004 -#define V4L2_TUNER_SUB_LANG1 0x0008 -#define V4L2_TUNER_SUB_RDS 0x0010 - -/* Values for the 'audmode' field */ -#define V4L2_TUNER_MODE_MONO 0x0000 -#define V4L2_TUNER_MODE_STEREO 0x0001 -#define V4L2_TUNER_MODE_LANG2 0x0002 -#define V4L2_TUNER_MODE_SAP 0x0002 -#define V4L2_TUNER_MODE_LANG1 0x0003 -#define V4L2_TUNER_MODE_LANG1_LANG2 0x0004 - -struct v4l2_frequency { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 frequency; - __u32 reserved[8]; -}; - -#define V4L2_BAND_MODULATION_VSB (1 << 1) -#define V4L2_BAND_MODULATION_FM (1 << 2) -#define V4L2_BAND_MODULATION_AM (1 << 3) - -struct v4l2_frequency_band { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 index; - __u32 capability; - __u32 rangelow; - __u32 rangehigh; - __u32 modulation; - __u32 reserved[9]; -}; - -struct v4l2_hw_freq_seek { - __u32 tuner; - __u32 type; /* enum v4l2_tuner_type */ - __u32 seek_upward; - __u32 wrap_around; - __u32 spacing; - __u32 rangelow; - __u32 rangehigh; - __u32 reserved[5]; -}; - -/* - * R D S - */ - -struct v4l2_rds_data { - __u8 lsb; - __u8 msb; - __u8 block; -} __attribute__ ((packed)); - -#define V4L2_RDS_BLOCK_MSK 0x7 -#define V4L2_RDS_BLOCK_A 0 -#define V4L2_RDS_BLOCK_B 1 -#define V4L2_RDS_BLOCK_C 2 -#define V4L2_RDS_BLOCK_D 3 -#define V4L2_RDS_BLOCK_C_ALT 4 -#define V4L2_RDS_BLOCK_INVALID 7 - -#define V4L2_RDS_BLOCK_CORRECTED 0x40 -#define V4L2_RDS_BLOCK_ERROR 0x80 - -/* - * A U D I O - */ -struct v4l2_audio { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 mode; - __u32 reserved[2]; -}; - -/* Flags for the 'capability' field */ -#define V4L2_AUDCAP_STEREO 0x00001 -#define V4L2_AUDCAP_AVL 0x00002 - -/* Flags for the 'mode' field */ -#define V4L2_AUDMODE_AVL 0x00001 - -struct v4l2_audioout { - __u32 index; - __u8 name[32]; - __u32 capability; - __u32 mode; - __u32 reserved[2]; -}; - -/* - * M P E G S E R V I C E S - * - * NOTE: EXPERIMENTAL API - */ -#if 1 -#define V4L2_ENC_IDX_FRAME_I (0) -#define V4L2_ENC_IDX_FRAME_P (1) -#define V4L2_ENC_IDX_FRAME_B (2) -#define V4L2_ENC_IDX_FRAME_MASK (0xf) - -struct v4l2_enc_idx_entry { - __u64 offset; - __u64 pts; - __u32 length; - __u32 flags; - __u32 reserved[2]; -}; - -#define V4L2_ENC_IDX_ENTRIES (64) -struct v4l2_enc_idx { - __u32 entries; - __u32 entries_cap; - __u32 reserved[4]; - struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES]; -}; - - -#define V4L2_ENC_CMD_START (0) -#define V4L2_ENC_CMD_STOP (1) -#define V4L2_ENC_CMD_PAUSE (2) -#define V4L2_ENC_CMD_RESUME (3) - -/* Flags for V4L2_ENC_CMD_STOP */ -#define V4L2_ENC_CMD_STOP_AT_GOP_END (1 << 0) - -struct v4l2_encoder_cmd { - __u32 cmd; - __u32 flags; - union { - struct { - __u32 data[8]; - } raw; - }; -}; - -/* Decoder commands */ -#define V4L2_DEC_CMD_START (0) -#define V4L2_DEC_CMD_STOP (1) -#define V4L2_DEC_CMD_PAUSE (2) -#define V4L2_DEC_CMD_RESUME (3) - -/* Flags for V4L2_DEC_CMD_START */ -#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) - -/* Flags for V4L2_DEC_CMD_PAUSE */ -#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0) - -/* Flags for V4L2_DEC_CMD_STOP */ -#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0) -#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1) - -/* Play format requirements (returned by the driver): */ - -/* The decoder has no special format requirements */ -#define V4L2_DEC_START_FMT_NONE (0) -/* The decoder requires full GOPs */ -#define V4L2_DEC_START_FMT_GOP (1) - -/* The structure must be zeroed before use by the application - This ensures it can be extended safely in the future. */ -struct v4l2_decoder_cmd { - __u32 cmd; - __u32 flags; - union { - struct { - __u64 pts; - } stop; - - struct { - /* 0 or 1000 specifies normal speed, - 1 specifies forward single stepping, - -1 specifies backward single stepping, - >1: playback at speed/1000 of the normal speed, - <-1: reverse playback at (-speed/1000) of the normal speed. */ - __s32 speed; - __u32 format; - } start; - - struct { - __u32 data[16]; - } raw; - }; -}; -#endif - - -/* - * D A T A S E R V I C E S ( V B I ) - * - * Data services API by Michael Schimek - */ - -/* Raw VBI */ -struct v4l2_vbi_format { - __u32 sampling_rate; /* in 1 Hz */ - __u32 offset; - __u32 samples_per_line; - __u32 sample_format; /* V4L2_PIX_FMT_* */ - __s32 start[2]; - __u32 count[2]; - __u32 flags; /* V4L2_VBI_* */ - __u32 reserved[2]; /* must be zero */ -}; - -/* VBI flags */ -#define V4L2_VBI_UNSYNC (1 << 0) -#define V4L2_VBI_INTERLACED (1 << 1) - -/* Sliced VBI - * - * This implements is a proposal V4L2 API to allow SLICED VBI - * required for some hardware encoders. It should change without - * notice in the definitive implementation. - */ - -struct v4l2_sliced_vbi_format { - __u16 service_set; - /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field - service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field - (equals frame lines 313-336 for 625 line video - standards, 263-286 for 525 line standards) */ - __u16 service_lines[2][24]; - __u32 io_size; - __u32 reserved[2]; /* must be zero */ -}; - -/* Teletext World System Teletext - (WST), defined on ITU-R BT.653-2 */ -#define V4L2_SLICED_TELETEXT_B (0x0001) -/* Video Program System, defined on ETS 300 231*/ -#define V4L2_SLICED_VPS (0x0400) -/* Closed Caption, defined on EIA-608 */ -#define V4L2_SLICED_CAPTION_525 (0x1000) -/* Wide Screen System, defined on ITU-R BT1119.1 */ -#define V4L2_SLICED_WSS_625 (0x4000) - -#define V4L2_SLICED_VBI_525 (V4L2_SLICED_CAPTION_525) -#define V4L2_SLICED_VBI_625 (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625) - -struct v4l2_sliced_vbi_cap { - __u16 service_set; - /* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field - service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field - (equals frame lines 313-336 for 625 line video - standards, 263-286 for 525 line standards) */ - __u16 service_lines[2][24]; - __u32 type; /* enum v4l2_buf_type */ - __u32 reserved[3]; /* must be 0 */ -}; - -struct v4l2_sliced_vbi_data { - __u32 id; - __u32 field; /* 0: first field, 1: second field */ - __u32 line; /* 1-23 */ - __u32 reserved; /* must be 0 */ - __u8 data[48]; -}; - -/* - * Sliced VBI data inserted into MPEG Streams - */ - -/* - * V4L2_MPEG_STREAM_VBI_FMT_IVTV: - * - * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an - * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI - * data - * - * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header - * definitions are not included here. See the MPEG-2 specifications for details - * on these headers. - */ - -/* Line type IDs */ -#define V4L2_MPEG_VBI_IVTV_TELETEXT_B (1) -#define V4L2_MPEG_VBI_IVTV_CAPTION_525 (4) -#define V4L2_MPEG_VBI_IVTV_WSS_625 (5) -#define V4L2_MPEG_VBI_IVTV_VPS (7) - -struct v4l2_mpeg_vbi_itv0_line { - __u8 id; /* One of V4L2_MPEG_VBI_IVTV_* above */ - __u8 data[42]; /* Sliced VBI data for the line */ -} __attribute__ ((packed)); - -struct v4l2_mpeg_vbi_itv0 { - __le32 linemask[2]; /* Bitmasks of VBI service lines present */ - struct v4l2_mpeg_vbi_itv0_line line[35]; -} __attribute__ ((packed)); - -struct v4l2_mpeg_vbi_ITV0 { - struct v4l2_mpeg_vbi_itv0_line line[36]; -} __attribute__ ((packed)); - -#define V4L2_MPEG_VBI_IVTV_MAGIC0 "itv0" -#define V4L2_MPEG_VBI_IVTV_MAGIC1 "ITV0" - -struct v4l2_mpeg_vbi_fmt_ivtv { - __u8 magic[4]; - union { - struct v4l2_mpeg_vbi_itv0 itv0; - struct v4l2_mpeg_vbi_ITV0 ITV0; - }; -} __attribute__ ((packed)); - -/* - * A G G R E G A T E S T R U C T U R E S - */ - -/** - * struct v4l2_plane_pix_format - additional, per-plane format definition - * @sizeimage: maximum size in bytes required for data, for which - * this plane will be used - * @bytesperline: distance in bytes between the leftmost pixels in two - * adjacent lines - */ -struct v4l2_plane_pix_format { - __u32 sizeimage; - __u16 bytesperline; - __u16 reserved[7]; -} __attribute__ ((packed)); - -/** - * struct v4l2_pix_format_mplane - multiplanar format definition - * @width: image width in pixels - * @height: image height in pixels - * @pixelformat: little endian four character code (fourcc) - * @field: enum v4l2_field; field order (for interlaced video) - * @colorspace: enum v4l2_colorspace; supplemental to pixelformat - * @plane_fmt: per-plane information - * @num_planes: number of planes for this format - */ -struct v4l2_pix_format_mplane { - __u32 width; - __u32 height; - __u32 pixelformat; - __u32 field; - __u32 colorspace; - - struct v4l2_plane_pix_format plane_fmt[VIDEO_MAX_PLANES]; - __u8 num_planes; - __u8 reserved[11]; -} __attribute__ ((packed)); - -/** - * struct v4l2_format - stream data format - * @type: enum v4l2_buf_type; type of the data stream - * @pix: definition of an image format - * @pix_mp: definition of a multiplanar image format - * @win: definition of an overlaid image - * @vbi: raw VBI capture or output parameters - * @sliced: sliced VBI capture or output parameters - * @raw_data: placeholder for future extensions and custom formats - */ -struct v4l2_format { - __u32 type; - union { - struct v4l2_pix_format pix; /* V4L2_BUF_TYPE_VIDEO_CAPTURE */ - struct v4l2_pix_format_mplane pix_mp; /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */ - struct v4l2_window win; /* V4L2_BUF_TYPE_VIDEO_OVERLAY */ - struct v4l2_vbi_format vbi; /* V4L2_BUF_TYPE_VBI_CAPTURE */ - struct v4l2_sliced_vbi_format sliced; /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */ - __u8 raw_data[200]; /* user-defined */ - } fmt; -}; - -/* Stream type-dependent parameters - */ -struct v4l2_streamparm { - __u32 type; /* enum v4l2_buf_type */ - union { - struct v4l2_captureparm capture; - struct v4l2_outputparm output; - __u8 raw_data[200]; /* user-defined */ - } parm; -}; - -/* - * E V E N T S - */ - -#define V4L2_EVENT_ALL 0 -#define V4L2_EVENT_VSYNC 1 -#define V4L2_EVENT_EOS 2 -#define V4L2_EVENT_CTRL 3 -#define V4L2_EVENT_FRAME_SYNC 4 -#define V4L2_EVENT_PRIVATE_START 0x08000000 - -/* Payload for V4L2_EVENT_VSYNC */ -struct v4l2_event_vsync { - /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */ - __u8 field; -} __attribute__ ((packed)); - -/* Payload for V4L2_EVENT_CTRL */ -#define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) -#define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) - -struct v4l2_event_ctrl { - __u32 changes; - __u32 type; - union { - __s32 value; - __s64 value64; - }; - __u32 flags; - __s32 minimum; - __s32 maximum; - __s32 step; - __s32 default_value; -}; - -struct v4l2_event_frame_sync { - __u32 frame_sequence; -}; - -struct v4l2_event { - __u32 type; - union { - struct v4l2_event_vsync vsync; - struct v4l2_event_ctrl ctrl; - struct v4l2_event_frame_sync frame_sync; - __u8 data[64]; - } u; - __u32 pending; - __u32 sequence; - struct timespec timestamp; - __u32 id; - __u32 reserved[8]; -}; - -#define V4L2_EVENT_SUB_FL_SEND_INITIAL (1 << 0) -#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK (1 << 1) - -struct v4l2_event_subscription { - __u32 type; - __u32 id; - __u32 flags; - __u32 reserved[5]; -}; - -/* - * A D V A N C E D D E B U G G I N G - * - * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! - * FOR DEBUGGING, TESTING AND INTERNAL USE ONLY! - */ - -/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */ - -#define V4L2_CHIP_MATCH_HOST 0 /* Match against chip ID on host (0 for the host) */ -#define V4L2_CHIP_MATCH_I2C_DRIVER 1 /* Match against I2C driver name */ -#define V4L2_CHIP_MATCH_I2C_ADDR 2 /* Match against I2C 7-bit address */ -#define V4L2_CHIP_MATCH_AC97 3 /* Match against anciliary AC97 chip */ - -struct v4l2_dbg_match { - __u32 type; /* Match type */ - union { /* Match this chip, meaning determined by type */ - __u32 addr; - char name[32]; - }; -} __attribute__ ((packed)); - -struct v4l2_dbg_register { - struct v4l2_dbg_match match; - __u32 size; /* register size in bytes */ - __u64 reg; - __u64 val; -} __attribute__ ((packed)); - -/* VIDIOC_DBG_G_CHIP_IDENT */ -struct v4l2_dbg_chip_ident { - struct v4l2_dbg_match match; - __u32 ident; /* chip identifier as specified in */ - __u32 revision; /* chip revision, chip specific */ -} __attribute__ ((packed)); - -/** - * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument - * @index: on return, index of the first created buffer - * @count: entry: number of requested buffers, - * return: number of created buffers - * @memory: enum v4l2_memory; buffer memory type - * @format: frame format, for which buffers are requested - * @reserved: future extensions - */ -struct v4l2_create_buffers { - __u32 index; - __u32 count; - __u32 memory; - struct v4l2_format format; - __u32 reserved[8]; -}; - -/* - * I O C T L C O D E S F O R V I D E O D E V I C E S - * - */ -#define VIDIOC_QUERYCAP _IOR('V', 0, struct v4l2_capability) -#define VIDIOC_RESERVED _IO('V', 1) -#define VIDIOC_ENUM_FMT _IOWR('V', 2, struct v4l2_fmtdesc) -#define VIDIOC_G_FMT _IOWR('V', 4, struct v4l2_format) -#define VIDIOC_S_FMT _IOWR('V', 5, struct v4l2_format) -#define VIDIOC_REQBUFS _IOWR('V', 8, struct v4l2_requestbuffers) -#define VIDIOC_QUERYBUF _IOWR('V', 9, struct v4l2_buffer) -#define VIDIOC_G_FBUF _IOR('V', 10, struct v4l2_framebuffer) -#define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) -#define VIDIOC_OVERLAY _IOW('V', 14, int) -#define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) -#define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) -#define VIDIOC_STREAMON _IOW('V', 18, int) -#define VIDIOC_STREAMOFF _IOW('V', 19, int) -#define VIDIOC_G_PARM _IOWR('V', 21, struct v4l2_streamparm) -#define VIDIOC_S_PARM _IOWR('V', 22, struct v4l2_streamparm) -#define VIDIOC_G_STD _IOR('V', 23, v4l2_std_id) -#define VIDIOC_S_STD _IOW('V', 24, v4l2_std_id) -#define VIDIOC_ENUMSTD _IOWR('V', 25, struct v4l2_standard) -#define VIDIOC_ENUMINPUT _IOWR('V', 26, struct v4l2_input) -#define VIDIOC_G_CTRL _IOWR('V', 27, struct v4l2_control) -#define VIDIOC_S_CTRL _IOWR('V', 28, struct v4l2_control) -#define VIDIOC_G_TUNER _IOWR('V', 29, struct v4l2_tuner) -#define VIDIOC_S_TUNER _IOW('V', 30, struct v4l2_tuner) -#define VIDIOC_G_AUDIO _IOR('V', 33, struct v4l2_audio) -#define VIDIOC_S_AUDIO _IOW('V', 34, struct v4l2_audio) -#define VIDIOC_QUERYCTRL _IOWR('V', 36, struct v4l2_queryctrl) -#define VIDIOC_QUERYMENU _IOWR('V', 37, struct v4l2_querymenu) -#define VIDIOC_G_INPUT _IOR('V', 38, int) -#define VIDIOC_S_INPUT _IOWR('V', 39, int) -#define VIDIOC_G_OUTPUT _IOR('V', 46, int) -#define VIDIOC_S_OUTPUT _IOWR('V', 47, int) -#define VIDIOC_ENUMOUTPUT _IOWR('V', 48, struct v4l2_output) -#define VIDIOC_G_AUDOUT _IOR('V', 49, struct v4l2_audioout) -#define VIDIOC_S_AUDOUT _IOW('V', 50, struct v4l2_audioout) -#define VIDIOC_G_MODULATOR _IOWR('V', 54, struct v4l2_modulator) -#define VIDIOC_S_MODULATOR _IOW('V', 55, struct v4l2_modulator) -#define VIDIOC_G_FREQUENCY _IOWR('V', 56, struct v4l2_frequency) -#define VIDIOC_S_FREQUENCY _IOW('V', 57, struct v4l2_frequency) -#define VIDIOC_CROPCAP _IOWR('V', 58, struct v4l2_cropcap) -#define VIDIOC_G_CROP _IOWR('V', 59, struct v4l2_crop) -#define VIDIOC_S_CROP _IOW('V', 60, struct v4l2_crop) -#define VIDIOC_G_JPEGCOMP _IOR('V', 61, struct v4l2_jpegcompression) -#define VIDIOC_S_JPEGCOMP _IOW('V', 62, struct v4l2_jpegcompression) -#define VIDIOC_QUERYSTD _IOR('V', 63, v4l2_std_id) -#define VIDIOC_TRY_FMT _IOWR('V', 64, struct v4l2_format) -#define VIDIOC_ENUMAUDIO _IOWR('V', 65, struct v4l2_audio) -#define VIDIOC_ENUMAUDOUT _IOWR('V', 66, struct v4l2_audioout) -#define VIDIOC_G_PRIORITY _IOR('V', 67, __u32) /* enum v4l2_priority */ -#define VIDIOC_S_PRIORITY _IOW('V', 68, __u32) /* enum v4l2_priority */ -#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap) -#define VIDIOC_LOG_STATUS _IO('V', 70) -#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct v4l2_ext_controls) -#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct v4l2_ext_controls) -#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct v4l2_ext_controls) -#if 1 -#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct v4l2_frmsizeenum) -#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum) -#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct v4l2_enc_idx) -#define VIDIOC_ENCODER_CMD _IOWR('V', 77, struct v4l2_encoder_cmd) -#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct v4l2_encoder_cmd) -#endif - -#if 1 -/* Experimental, meant for debugging, testing and internal use. - Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. - You must be root to use these ioctls. Never use these in applications! */ -#define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) -#define VIDIOC_DBG_G_REGISTER _IOWR('V', 80, struct v4l2_dbg_register) - -/* Experimental, meant for debugging, testing and internal use. - Never use this ioctl in applications! */ -#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident) -#endif - -#define VIDIOC_S_HW_FREQ_SEEK _IOW('V', 82, struct v4l2_hw_freq_seek) - -/* These four DV Preset ioctls are deprecated in favor of the DV Timings - ioctls. */ -#define VIDIOC_ENUM_DV_PRESETS _IOWR('V', 83, struct v4l2_dv_enum_preset) -#define VIDIOC_S_DV_PRESET _IOWR('V', 84, struct v4l2_dv_preset) -#define VIDIOC_G_DV_PRESET _IOWR('V', 85, struct v4l2_dv_preset) -#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct v4l2_dv_preset) -#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct v4l2_dv_timings) -#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct v4l2_dv_timings) -#define VIDIOC_DQEVENT _IOR('V', 89, struct v4l2_event) -#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription) -#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription) - -/* Experimental, the below two ioctls may change over the next couple of kernel - versions */ -#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers) -#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer) - -/* Experimental selection API */ -#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection) -#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection) - -/* Experimental, these two ioctls may change over the next couple of kernel - versions. */ -#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd) -#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd) - -/* Experimental, these three ioctls may change over the next couple of kernel - versions. */ -#define VIDIOC_ENUM_DV_TIMINGS _IOWR('V', 98, struct v4l2_enum_dv_timings) -#define VIDIOC_QUERY_DV_TIMINGS _IOR('V', 99, struct v4l2_dv_timings) -#define VIDIOC_DV_TIMINGS_CAP _IOWR('V', 100, struct v4l2_dv_timings_cap) - -/* Experimental, this ioctl may change over the next couple of kernel - versions. */ -#define VIDIOC_ENUM_FREQ_BANDS _IOWR('V', 101, struct v4l2_frequency_band) - -/* Reminder: when adding new ioctls please add support for them to - drivers/media/video/v4l2-compat-ioctl32.c as well! */ - -#define BASE_VIDIOC_PRIVATE 192 /* 192-255 are private */ +#include #endif /* __LINUX_VIDEODEV2_H */ diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h deleted file mode 100644 index 277c4ad44e84..000000000000 --- a/include/linux/virtio_9p.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _LINUX_VIRTIO_9P_H -#define _LINUX_VIRTIO_9P_H -/* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ -#include -#include -#include - -/* The feature bitmap for virtio 9P */ - -/* The mount point is specified in a config variable */ -#define VIRTIO_9P_MOUNT_TAG 0 - -struct virtio_9p_config { - /* length of the tag name */ - __u16 tag_len; - /* non-NULL terminated tag name */ - __u8 tag[0]; -} __attribute__((packed)); - -#endif /* _LINUX_VIRTIO_9P_H */ diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h deleted file mode 100644 index 652dc8bea921..000000000000 --- a/include/linux/virtio_balloon.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _LINUX_VIRTIO_BALLOON_H -#define _LINUX_VIRTIO_BALLOON_H -/* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ -#include -#include - -/* The feature bitmap for virtio balloon */ -#define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */ -#define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */ - -/* Size of a PFN in the balloon interface. */ -#define VIRTIO_BALLOON_PFN_SHIFT 12 - -struct virtio_balloon_config -{ - /* Number of pages host wants Guest to give up. */ - __le32 num_pages; - /* Number of pages we've actually got in balloon. */ - __le32 actual; -}; - -#define VIRTIO_BALLOON_S_SWAP_IN 0 /* Amount of memory swapped in */ -#define VIRTIO_BALLOON_S_SWAP_OUT 1 /* Amount of memory swapped out */ -#define VIRTIO_BALLOON_S_MAJFLT 2 /* Number of major faults */ -#define VIRTIO_BALLOON_S_MINFLT 3 /* Number of minor faults */ -#define VIRTIO_BALLOON_S_MEMFREE 4 /* Total amount of free memory */ -#define VIRTIO_BALLOON_S_MEMTOT 5 /* Total amount of memory */ -#define VIRTIO_BALLOON_S_NR 6 - -struct virtio_balloon_stat { - u16 tag; - u64 val; -} __attribute__((packed)); - -#endif /* _LINUX_VIRTIO_BALLOON_H */ diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h deleted file mode 100644 index 6d8e61c48563..000000000000 --- a/include/linux/virtio_blk.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef _LINUX_VIRTIO_BLK_H -#define _LINUX_VIRTIO_BLK_H -/* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ -#include -#include -#include - -/* Feature bits */ -#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */ -#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ -#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ -#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ -#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ -#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/ -#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */ -#define VIRTIO_BLK_F_WCE 9 /* Writeback mode enabled after reset */ -#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */ -#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */ - -#ifndef __KERNEL__ -/* Old (deprecated) name for VIRTIO_BLK_F_WCE. */ -#define VIRTIO_BLK_F_FLUSH VIRTIO_BLK_F_WCE -#endif - -#define VIRTIO_BLK_ID_BYTES 20 /* ID string length */ - -struct virtio_blk_config { - /* The capacity (in 512-byte sectors). */ - __u64 capacity; - /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ - __u32 size_max; - /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ - __u32 seg_max; - /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */ - struct virtio_blk_geometry { - __u16 cylinders; - __u8 heads; - __u8 sectors; - } geometry; - - /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */ - __u32 blk_size; - - /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */ - /* exponent for physical block per logical block. */ - __u8 physical_block_exp; - /* alignment offset in logical blocks. */ - __u8 alignment_offset; - /* minimum I/O size without performance penalty in logical blocks. */ - __u16 min_io_size; - /* optimal sustained I/O size in logical blocks. */ - __u32 opt_io_size; - - /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */ - __u8 wce; -} __attribute__((packed)); - -/* - * Command types - * - * Usage is a bit tricky as some bits are used as flags and some are not. - * - * Rules: - * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or - * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own - * and may not be combined with any of the other flags. - */ - -/* These two define direction. */ -#define VIRTIO_BLK_T_IN 0 -#define VIRTIO_BLK_T_OUT 1 - -/* This bit says it's a scsi command, not an actual read or write. */ -#define VIRTIO_BLK_T_SCSI_CMD 2 - -/* Cache flush command */ -#define VIRTIO_BLK_T_FLUSH 4 - -/* Get device ID command */ -#define VIRTIO_BLK_T_GET_ID 8 - -/* Barrier before this op. */ -#define VIRTIO_BLK_T_BARRIER 0x80000000 - -/* This is the first element of the read scatter-gather list. */ -struct virtio_blk_outhdr { - /* VIRTIO_BLK_T* */ - __u32 type; - /* io priority. */ - __u32 ioprio; - /* Sector (ie. 512 byte offset) */ - __u64 sector; -}; - -struct virtio_scsi_inhdr { - __u32 errors; - __u32 data_len; - __u32 sense_len; - __u32 residual; -}; - -/* And this is the final byte of the write scatter-gather list. */ -#define VIRTIO_BLK_S_OK 0 -#define VIRTIO_BLK_S_IOERR 1 -#define VIRTIO_BLK_S_UNSUPP 2 -#endif /* _LINUX_VIRTIO_BLK_H */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index e2850a7ea276..29b9104232b4 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -1,60 +1,10 @@ #ifndef _LINUX_VIRTIO_CONFIG_H #define _LINUX_VIRTIO_CONFIG_H -/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so - * anyone can use the definitions to implement compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ - -/* Virtio devices use a standardized configuration space to define their - * features and pass configuration information, but each implementation can - * store and access that space differently. */ -#include - -/* Status byte for guest to report progress, and synchronize features. */ -/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ -#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 -/* We have found a driver for the device. */ -#define VIRTIO_CONFIG_S_DRIVER 2 -/* Driver has used its parts of the config, and is happy */ -#define VIRTIO_CONFIG_S_DRIVER_OK 4 -/* We've given up on this device. */ -#define VIRTIO_CONFIG_S_FAILED 0x80 - -/* Some virtio feature bits (currently bits 28 through 31) are reserved for the - * transport being used (eg. virtio_ring), the rest are per-device feature - * bits. */ -#define VIRTIO_TRANSPORT_F_START 28 -#define VIRTIO_TRANSPORT_F_END 32 - -/* Do we get callbacks when the ring is completely used, even if we've - * suppressed them? */ -#define VIRTIO_F_NOTIFY_ON_EMPTY 24 -#ifdef __KERNEL__ #include #include #include +#include /** * virtio_config_ops - operations for configuring a virtio device @@ -213,5 +163,4 @@ int virtqueue_set_affinity(struct virtqueue *vq, int cpu) } -#endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index bdf4b0034739..d2e2785af602 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -1,8 +1,3 @@ -#ifndef _LINUX_VIRTIO_CONSOLE_H -#define _LINUX_VIRTIO_CONSOLE_H -#include -#include -#include /* * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so * anyone can use the definitions to implement compatible drivers/servers: @@ -34,44 +29,10 @@ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011 * Copyright (C) Amit Shah , 2009, 2010, 2011 */ +#ifndef _LINUX_VIRTIO_CONSOLE_H +#define _LINUX_VIRTIO_CONSOLE_H -/* Feature bits */ -#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */ -#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */ - -#define VIRTIO_CONSOLE_BAD_ID (~(u32)0) - -struct virtio_console_config { - /* colums of the screens */ - __u16 cols; - /* rows of the screens */ - __u16 rows; - /* max. number of ports this device can hold */ - __u32 max_nr_ports; -} __attribute__((packed)); - -/* - * A message that's passed between the Host and the Guest for a - * particular port. - */ -struct virtio_console_control { - __u32 id; /* Port number */ - __u16 event; /* The kind of control event (see below) */ - __u16 value; /* Extra information for the key */ -}; - -/* Some events for control messages */ -#define VIRTIO_CONSOLE_DEVICE_READY 0 -#define VIRTIO_CONSOLE_PORT_ADD 1 -#define VIRTIO_CONSOLE_PORT_REMOVE 2 -#define VIRTIO_CONSOLE_PORT_READY 3 -#define VIRTIO_CONSOLE_CONSOLE_PORT 4 -#define VIRTIO_CONSOLE_RESIZE 5 -#define VIRTIO_CONSOLE_PORT_OPEN 6 -#define VIRTIO_CONSOLE_PORT_NAME 7 +#include -#ifdef __KERNEL__ int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)); -#endif /* __KERNEL__ */ - #endif /* _LINUX_VIRTIO_CONSOLE_H */ diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h deleted file mode 100644 index 270fb22c5811..000000000000 --- a/include/linux/virtio_ids.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _LINUX_VIRTIO_IDS_H -#define _LINUX_VIRTIO_IDS_H -/* - * Virtio IDs - * - * This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ - -#define VIRTIO_ID_NET 1 /* virtio net */ -#define VIRTIO_ID_BLOCK 2 /* virtio block */ -#define VIRTIO_ID_CONSOLE 3 /* virtio console */ -#define VIRTIO_ID_RNG 4 /* virtio rng */ -#define VIRTIO_ID_BALLOON 5 /* virtio balloon */ -#define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ -#define VIRTIO_ID_SCSI 8 /* virtio scsi */ -#define VIRTIO_ID_9P 9 /* 9p virtio console */ - -#endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h deleted file mode 100644 index 2470f541af50..000000000000 --- a/include/linux/virtio_net.h +++ /dev/null @@ -1,169 +0,0 @@ -#ifndef _LINUX_VIRTIO_NET_H -#define _LINUX_VIRTIO_NET_H -/* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. */ -#include -#include -#include -#include - -/* The feature bitmap for virtio net */ -#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ -#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ -#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ -#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ -#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ -#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ -#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ -#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ -#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ -#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ -#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ -#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ -#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ -#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ -#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ -#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ -#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ -#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ -#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the - * network */ - -#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ -#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ - -struct virtio_net_config { - /* The config defining mac address (if VIRTIO_NET_F_MAC) */ - __u8 mac[6]; - /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ - __u16 status; -} __attribute__((packed)); - -/* This is the first element of the scatter-gather list. If you don't - * specify GSO or CSUM features, you can simply ignore the header. */ -struct virtio_net_hdr { -#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset -#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid - __u8 flags; -#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame -#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO) -#define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO) -#define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP -#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set - __u8 gso_type; - __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ - __u16 gso_size; /* Bytes to append to hdr_len per frame */ - __u16 csum_start; /* Position to start checksumming from */ - __u16 csum_offset; /* Offset after that to place checksum */ -}; - -/* This is the version of the header to use when the MRG_RXBUF - * feature has been negotiated. */ -struct virtio_net_hdr_mrg_rxbuf { - struct virtio_net_hdr hdr; - __u16 num_buffers; /* Number of merged rx buffers */ -}; - -/* - * Control virtqueue data structures - * - * The control virtqueue expects a header in the first sg entry - * and an ack/status response in the last entry. Data for the - * command goes in between. - */ -struct virtio_net_ctrl_hdr { - __u8 class; - __u8 cmd; -} __attribute__((packed)); - -typedef __u8 virtio_net_ctrl_ack; - -#define VIRTIO_NET_OK 0 -#define VIRTIO_NET_ERR 1 - -/* - * Control the RX mode, ie. promisucous, allmulti, etc... - * All commands require an "out" sg entry containing a 1 byte - * state value, zero = disable, non-zero = enable. Commands - * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. - * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. - */ -#define VIRTIO_NET_CTRL_RX 0 - #define VIRTIO_NET_CTRL_RX_PROMISC 0 - #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 - #define VIRTIO_NET_CTRL_RX_ALLUNI 2 - #define VIRTIO_NET_CTRL_RX_NOMULTI 3 - #define VIRTIO_NET_CTRL_RX_NOUNI 4 - #define VIRTIO_NET_CTRL_RX_NOBCAST 5 - -/* - * Control the MAC filter table. - * - * The MAC filter table is managed by the hypervisor, the guest should - * assume the size is infinite. Filtering should be considered - * non-perfect, ie. based on hypervisor resources, the guest may - * received packets from sources not specified in the filter list. - * - * In addition to the class/cmd header, the TABLE_SET command requires - * two out scatterlists. Each contains a 4 byte count of entries followed - * by a concatenated byte stream of the ETH_ALEN MAC addresses. The - * first sg list contains unicast addresses, the second is for multicast. - * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature - * is available. - */ -struct virtio_net_ctrl_mac { - __u32 entries; - __u8 macs[][ETH_ALEN]; -} __attribute__((packed)); - -#define VIRTIO_NET_CTRL_MAC 1 - #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 - -/* - * Control VLAN filtering - * - * The VLAN filter table is controlled via a simple ADD/DEL interface. - * VLAN IDs not added may be filterd by the hypervisor. Del is the - * opposite of add. Both commands expect an out entry containing a 2 - * byte VLAN ID. VLAN filterting is available with the - * VIRTIO_NET_F_CTRL_VLAN feature bit. - */ -#define VIRTIO_NET_CTRL_VLAN 2 - #define VIRTIO_NET_CTRL_VLAN_ADD 0 - #define VIRTIO_NET_CTRL_VLAN_DEL 1 - -/* - * Control link announce acknowledgement - * - * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that - * driver has recevied the notification; device would clear the - * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives - * this command. - */ -#define VIRTIO_NET_CTRL_ANNOUNCE 3 - #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 - -#endif /* _LINUX_VIRTIO_NET_H */ diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h deleted file mode 100644 index ea66f3f60d63..000000000000 --- a/include/linux/virtio_pci.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Virtio PCI driver - * - * This module allows virtio devices to be used over a virtual PCI device. - * This can be used with QEMU based VMMs like KVM or Xen. - * - * Copyright IBM Corp. 2007 - * - * Authors: - * Anthony Liguori - * - * This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef _LINUX_VIRTIO_PCI_H -#define _LINUX_VIRTIO_PCI_H - -#include - -/* A 32-bit r/o bitmask of the features supported by the host */ -#define VIRTIO_PCI_HOST_FEATURES 0 - -/* A 32-bit r/w bitmask of features activated by the guest */ -#define VIRTIO_PCI_GUEST_FEATURES 4 - -/* A 32-bit r/w PFN for the currently selected queue */ -#define VIRTIO_PCI_QUEUE_PFN 8 - -/* A 16-bit r/o queue size for the currently selected queue */ -#define VIRTIO_PCI_QUEUE_NUM 12 - -/* A 16-bit r/w queue selector */ -#define VIRTIO_PCI_QUEUE_SEL 14 - -/* A 16-bit r/w queue notifier */ -#define VIRTIO_PCI_QUEUE_NOTIFY 16 - -/* An 8-bit device status register. */ -#define VIRTIO_PCI_STATUS 18 - -/* An 8-bit r/o interrupt status register. Reading the value will return the - * current contents of the ISR and will also clear it. This is effectively - * a read-and-acknowledge. */ -#define VIRTIO_PCI_ISR 19 - -/* The bit of the ISR which indicates a device configuration change. */ -#define VIRTIO_PCI_ISR_CONFIG 0x2 - -/* MSI-X registers: only enabled if MSI-X is enabled. */ -/* A 16-bit vector for configuration changes. */ -#define VIRTIO_MSI_CONFIG_VECTOR 20 -/* A 16-bit vector for selected queue notifications. */ -#define VIRTIO_MSI_QUEUE_VECTOR 22 -/* Vector value used to disable MSI for queue */ -#define VIRTIO_MSI_NO_VECTOR 0xffff - -/* The remaining space is defined by each driver as the per-driver - * configuration space */ -#define VIRTIO_PCI_CONFIG(dev) ((dev)->msix_enabled ? 24 : 20) - -/* Virtio ABI version, this must match exactly */ -#define VIRTIO_PCI_ABI_VERSION 0 - -/* How many bits to shift physical queue address written to QUEUE_PFN. - * 12 is historical, and due to x86 page size. */ -#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12 - -/* The alignment to use between consumer and producer parts of vring. - * x86 pagesize again. */ -#define VIRTIO_PCI_VRING_ALIGN 4096 -#endif diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index c2d793a06ad7..63c6ea199519 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -1,167 +1,9 @@ #ifndef _LINUX_VIRTIO_RING_H #define _LINUX_VIRTIO_RING_H -/* An interface for efficient virtio implementation, currently for use by KVM - * and lguest, but hopefully others soon. Do NOT change this since it will - * break existing servers and clients. - * - * This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of IBM nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Copyright Rusty Russell IBM Corporation 2007. */ -#include -/* This marks a buffer as continuing via the next field. */ -#define VRING_DESC_F_NEXT 1 -/* This marks a buffer as write-only (otherwise read-only). */ -#define VRING_DESC_F_WRITE 2 -/* This means the buffer contains a list of buffer descriptors. */ -#define VRING_DESC_F_INDIRECT 4 - -/* The Host uses this in used->flags to advise the Guest: don't kick me when - * you add a buffer. It's unreliable, so it's simply an optimization. Guest - * will still kick if it's out of buffers. */ -#define VRING_USED_F_NO_NOTIFY 1 -/* The Guest uses this in avail->flags to advise the Host: don't interrupt me - * when you consume a buffer. It's unreliable, so it's simply an - * optimization. */ -#define VRING_AVAIL_F_NO_INTERRUPT 1 - -/* We support indirect buffer descriptors */ -#define VIRTIO_RING_F_INDIRECT_DESC 28 - -/* The Guest publishes the used index for which it expects an interrupt - * at the end of the avail ring. Host should ignore the avail->flags field. */ -/* The Host publishes the avail index for which it expects a kick - * at the end of the used ring. Guest should ignore the used->flags field. */ -#define VIRTIO_RING_F_EVENT_IDX 29 - -/* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ -struct vring_desc { - /* Address (guest-physical). */ - __u64 addr; - /* Length. */ - __u32 len; - /* The flags as indicated above. */ - __u16 flags; - /* We chain unused descriptors via this, too */ - __u16 next; -}; - -struct vring_avail { - __u16 flags; - __u16 idx; - __u16 ring[]; -}; - -/* u32 is used here for ids for padding reasons. */ -struct vring_used_elem { - /* Index of start of used descriptor chain. */ - __u32 id; - /* Total length of the descriptor chain which was used (written to) */ - __u32 len; -}; - -struct vring_used { - __u16 flags; - __u16 idx; - struct vring_used_elem ring[]; -}; - -struct vring { - unsigned int num; - - struct vring_desc *desc; - - struct vring_avail *avail; - - struct vring_used *used; -}; - -/* The standard layout for the ring is a continuous chunk of memory which looks - * like this. We assume num is a power of 2. - * - * struct vring - * { - * // The actual descriptors (16 bytes each) - * struct vring_desc desc[num]; - * - * // A ring of available descriptor heads with free-running index. - * __u16 avail_flags; - * __u16 avail_idx; - * __u16 available[num]; - * __u16 used_event_idx; - * - * // Padding to the next align boundary. - * char pad[]; - * - * // A ring of used descriptor heads with free-running index. - * __u16 used_flags; - * __u16 used_idx; - * struct vring_used_elem used[num]; - * __u16 avail_event_idx; - * }; - */ -/* We publish the used event index at the end of the available ring, and vice - * versa. They are at the end for backwards compatibility. */ -#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num]) -#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num]) - -static inline void vring_init(struct vring *vr, unsigned int num, void *p, - unsigned long align) -{ - vr->num = num; - vr->desc = p; - vr->avail = p + num*sizeof(struct vring_desc); - vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16) - + align-1) & ~(align - 1)); -} - -static inline unsigned vring_size(unsigned int num, unsigned long align) -{ - return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num) - + align - 1) & ~(align - 1)) - + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; -} - -/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ -/* Assuming a given event_idx value from the other size, if - * we have just incremented index from old to new_idx, - * should we trigger an event? */ -static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) -{ - /* Note: Xen has similar logic for notification hold-off - * in include/xen/interface/io/ring.h with req_event and req_prod - * corresponding to event_idx + 1 and new_idx respectively. - * Note also that req_event and req_prod in Xen start at 1, - * event indexes in virtio start at 0. */ - return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old); -} - -#ifdef __KERNEL__ #include +#include + struct virtio_device; struct virtqueue; @@ -179,5 +21,4 @@ void vring_del_virtqueue(struct virtqueue *vq); void vring_transport_features(struct virtio_device *vdev); irqreturn_t vring_interrupt(int irq, void *_vq); -#endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_RING_H */ diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h deleted file mode 100644 index c4d5de896f0c..000000000000 --- a/include/linux/virtio_rng.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _LINUX_VIRTIO_RNG_H -#define _LINUX_VIRTIO_RNG_H -/* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. */ -#include -#include - -#endif /* _LINUX_VIRTIO_RNG_H */ diff --git a/include/linux/vt.h b/include/linux/vt.h index 30a8dd9c83ff..b186e0435239 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -1,90 +1,8 @@ #ifndef _LINUX_VT_H #define _LINUX_VT_H +#include -/* - * These constants are also useful for user-level apps (e.g., VC - * resizing). - */ -#define MIN_NR_CONSOLES 1 /* must be at least 1 */ -#define MAX_NR_CONSOLES 63 /* serial lines start at 64 */ -#define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */ - /* Note: the ioctl VT_GETSTATE does not work for - consoles 16 and higher (since it returns a short) */ - -/* 0x56 is 'V', to avoid collision with termios and kd */ - -#define VT_OPENQRY 0x5600 /* find available vt */ - -struct vt_mode { - char mode; /* vt mode */ - char waitv; /* if set, hang on writes if not active */ - short relsig; /* signal to raise on release req */ - short acqsig; /* signal to raise on acquisition */ - short frsig; /* unused (set to 0) */ -}; -#define VT_GETMODE 0x5601 /* get mode of active vt */ -#define VT_SETMODE 0x5602 /* set mode of active vt */ -#define VT_AUTO 0x00 /* auto vt switching */ -#define VT_PROCESS 0x01 /* process controls switching */ -#define VT_ACKACQ 0x02 /* acknowledge switch */ - -struct vt_stat { - unsigned short v_active; /* active vt */ - unsigned short v_signal; /* signal to send */ - unsigned short v_state; /* vt bitmask */ -}; -#define VT_GETSTATE 0x5603 /* get global vt state info */ -#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */ - -#define VT_RELDISP 0x5605 /* release display */ - -#define VT_ACTIVATE 0x5606 /* make vt active */ -#define VT_WAITACTIVE 0x5607 /* wait for vt active */ -#define VT_DISALLOCATE 0x5608 /* free memory associated to vt */ - -struct vt_sizes { - unsigned short v_rows; /* number of rows */ - unsigned short v_cols; /* number of columns */ - unsigned short v_scrollsize; /* number of lines of scrollback */ -}; -#define VT_RESIZE 0x5609 /* set kernel's idea of screensize */ - -struct vt_consize { - unsigned short v_rows; /* number of rows */ - unsigned short v_cols; /* number of columns */ - unsigned short v_vlin; /* number of pixel rows on screen */ - unsigned short v_clin; /* number of pixel rows per character */ - unsigned short v_vcol; /* number of pixel columns on screen */ - unsigned short v_ccol; /* number of pixel columns per character */ -}; -#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */ -#define VT_LOCKSWITCH 0x560B /* disallow vt switching */ -#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */ -#define VT_GETHIFONTMASK 0x560D /* return hi font mask */ - -struct vt_event { - unsigned int event; -#define VT_EVENT_SWITCH 0x0001 /* Console switch */ -#define VT_EVENT_BLANK 0x0002 /* Screen blank */ -#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ -#define VT_EVENT_RESIZE 0x0008 /* Resize display */ -#define VT_MAX_EVENT 0x000F - unsigned int oldev; /* Old console */ - unsigned int newev; /* New console (if changing) */ - unsigned int pad[4]; /* Padding for expansion */ -}; - -#define VT_WAITEVENT 0x560E /* Wait for an event */ - -struct vt_setactivate { - unsigned int console; - struct vt_mode mode; -}; - -#define VT_SETACTIVATE 0x560F /* Activate and set the mode of a console */ - -#ifdef __KERNEL__ /* Virtual Terminal events. */ #define VT_ALLOCATE 0x0001 /* Console got allocated */ @@ -106,8 +24,4 @@ static inline int vt_kmsg_redirect(int new) #endif -#endif /* __KERNEL__ */ - -#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1) - #endif /* _LINUX_VT_H */ diff --git a/include/linux/wait.h b/include/linux/wait.h index 1dee81c41ff1..168dfe122dd3 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -1,28 +1,12 @@ #ifndef _LINUX_WAIT_H #define _LINUX_WAIT_H -#define WNOHANG 0x00000001 -#define WUNTRACED 0x00000002 -#define WSTOPPED WUNTRACED -#define WEXITED 0x00000004 -#define WCONTINUED 0x00000008 -#define WNOWAIT 0x01000000 /* Don't reap, just poll status. */ - -#define __WNOTHREAD 0x20000000 /* Don't wait on children of other threads in this group */ -#define __WALL 0x40000000 /* Wait on all children, regardless of type */ -#define __WCLONE 0x80000000 /* Wait only on non-SIGCHLD children */ - -/* First argument to waitid: */ -#define P_ALL 0 -#define P_PID 1 -#define P_PGID 2 - -#ifdef __KERNEL__ #include #include #include #include +#include typedef struct __wait_queue wait_queue_t; typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key); @@ -663,6 +647,4 @@ static inline int wait_on_bit_lock(void *word, int bit, return out_of_line_wait_on_bit_lock(word, bit, action, mode); } -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index 3157cc1fada6..cec4b4159767 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -43,413 +43,11 @@ * Jan 16, 1997 Gene Kozin router_devlist made public * Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). *****************************************************************************/ - #ifndef _ROUTER_H #define _ROUTER_H -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/ entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - -/* - * Configuration options defines. - */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; - -/* 'state' defines */ -enum wan_states -{ - WAN_UNCONFIGURED, /* link/channel is not configured */ - WAN_DISCONNECTED, /* link/channel is disconnected */ - WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ -}; - -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; +#include -#ifdef __KERNEL__ /****** Kernel Interface ****************************************************/ #include /* support for device drivers */ @@ -528,5 +126,4 @@ extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long a /* list of registered devices */ extern struct wan_device *wanrouter_router_devlist; -#endif /* __KERNEL__ */ #endif /* _ROUTER_H */ diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index da70f0facd2b..b7f45d48b2de 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -5,59 +5,14 @@ * by Ken Hollis * */ - #ifndef _LINUX_WATCHDOG_H #define _LINUX_WATCHDOG_H -#include -#include - -#define WATCHDOG_IOCTL_BASE 'W' - -struct watchdog_info { - __u32 options; /* Options the card/driver supports */ - __u32 firmware_version; /* Firmware version of the card */ - __u8 identity[32]; /* Identity of the board */ -}; - -#define WDIOC_GETSUPPORT _IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info) -#define WDIOC_GETSTATUS _IOR(WATCHDOG_IOCTL_BASE, 1, int) -#define WDIOC_GETBOOTSTATUS _IOR(WATCHDOG_IOCTL_BASE, 2, int) -#define WDIOC_GETTEMP _IOR(WATCHDOG_IOCTL_BASE, 3, int) -#define WDIOC_SETOPTIONS _IOR(WATCHDOG_IOCTL_BASE, 4, int) -#define WDIOC_KEEPALIVE _IOR(WATCHDOG_IOCTL_BASE, 5, int) -#define WDIOC_SETTIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 6, int) -#define WDIOC_GETTIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 7, int) -#define WDIOC_SETPRETIMEOUT _IOWR(WATCHDOG_IOCTL_BASE, 8, int) -#define WDIOC_GETPRETIMEOUT _IOR(WATCHDOG_IOCTL_BASE, 9, int) -#define WDIOC_GETTIMELEFT _IOR(WATCHDOG_IOCTL_BASE, 10, int) - -#define WDIOF_UNKNOWN -1 /* Unknown flag error */ -#define WDIOS_UNKNOWN -1 /* Unknown status error */ - -#define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ -#define WDIOF_FANFAULT 0x0002 /* Fan failed */ -#define WDIOF_EXTERN1 0x0004 /* External relay 1 */ -#define WDIOF_EXTERN2 0x0008 /* External relay 2 */ -#define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ -#define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ -#define WDIOF_POWEROVER 0x0040 /* Power over voltage */ -#define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ -#define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ -#define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */ -#define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or - other external alarm not a reboot */ -#define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ - -#define WDIOS_DISABLECARD 0x0001 /* Turn off the watchdog timer */ -#define WDIOS_ENABLECARD 0x0002 /* Turn on the watchdog timer */ -#define WDIOS_TEMPPANIC 0x0004 /* Kernel panic on temperature trip */ - -#ifdef __KERNEL__ #include #include #include +#include struct watchdog_ops; struct watchdog_device; @@ -178,6 +133,4 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) extern int watchdog_register_device(struct watchdog_device *); extern void watchdog_unregister_device(struct watchdog_device *); -#endif /* __KERNEL__ */ - #endif /* ifndef _LINUX_WATCHDOG_H */ diff --git a/include/linux/wimax.h b/include/linux/wimax.h deleted file mode 100644 index 9f6b77af2f6d..000000000000 --- a/include/linux/wimax.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Linux WiMax - * API for user space - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation - * Inaky Perez-Gonzalez - * - Initial implementation - * - * - * This file declares the user/kernel protocol that is spoken over - * Generic Netlink, as well as any type declaration that is to be used - * by kernel and user space. - * - * It is intended for user space to clone it verbatim to use it as a - * primary reference for definitions. - * - * Stuff intended for kernel usage as well as full protocol and stack - * documentation is rooted in include/net/wimax.h. - */ - -#ifndef __LINUX__WIMAX_H__ -#define __LINUX__WIMAX_H__ - -#include - -enum { - /** - * Version of the interface (unsigned decimal, MMm, max 25.5) - * M - Major: change if removing or modifying an existing call. - * m - minor: change when adding a new call - */ - WIMAX_GNL_VERSION = 01, - /* Generic NetLink attributes */ - WIMAX_GNL_ATTR_INVALID = 0x00, - WIMAX_GNL_ATTR_MAX = 10, -}; - - -/* - * Generic NetLink operations - * - * Most of these map to an API call; _OP_ stands for operation, _RP_ - * for reply and _RE_ for report (aka: signal). - */ -enum { - WIMAX_GNL_OP_MSG_FROM_USER, /* User to kernel message */ - WIMAX_GNL_OP_MSG_TO_USER, /* Kernel to user message */ - WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ - WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ - WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ - WIMAX_GNL_OP_STATE_GET, /* Request for current state */ -}; - - -/* Message from user / to user */ -enum { - WIMAX_GNL_MSG_IFIDX = 1, - WIMAX_GNL_MSG_PIPE_NAME, - WIMAX_GNL_MSG_DATA, -}; - - -/* - * wimax_rfkill() - * - * The state of the radio (ON/OFF) is mapped to the rfkill subsystem's - * switch state (DISABLED/ENABLED). - */ -enum wimax_rf_state { - WIMAX_RF_OFF = 0, /* Radio is off, rfkill on/enabled */ - WIMAX_RF_ON = 1, /* Radio is on, rfkill off/disabled */ - WIMAX_RF_QUERY = 2, -}; - -/* Attributes */ -enum { - WIMAX_GNL_RFKILL_IFIDX = 1, - WIMAX_GNL_RFKILL_STATE, -}; - - -/* Attributes for wimax_reset() */ -enum { - WIMAX_GNL_RESET_IFIDX = 1, -}; - -/* Attributes for wimax_state_get() */ -enum { - WIMAX_GNL_STGET_IFIDX = 1, -}; - -/* - * Attributes for the Report State Change - * - * For now we just have the old and new states; new attributes might - * be added later on. - */ -enum { - WIMAX_GNL_STCH_IFIDX = 1, - WIMAX_GNL_STCH_STATE_OLD, - WIMAX_GNL_STCH_STATE_NEW, -}; - - -/** - * enum wimax_st - The different states of a WiMAX device - * @__WIMAX_ST_NULL: The device structure has been allocated and zeroed, - * but still wimax_dev_add() hasn't been called. There is no state. - * - * @WIMAX_ST_DOWN: The device has been registered with the WiMAX and - * networking stacks, but it is not initialized (normally that is - * done with 'ifconfig DEV up' [or equivalent], which can upload - * firmware and enable communications with the device). - * In this state, the device is powered down and using as less - * power as possible. - * This state is the default after a call to wimax_dev_add(). It - * is ok to have drivers move directly to %WIMAX_ST_UNINITIALIZED - * or %WIMAX_ST_RADIO_OFF in _probe() after the call to - * wimax_dev_add(). - * It is recommended that the driver leaves this state when - * calling 'ifconfig DEV up' and enters it back on 'ifconfig DEV - * down'. - * - * @__WIMAX_ST_QUIESCING: The device is being torn down, so no API - * operations are allowed to proceed except the ones needed to - * complete the device clean up process. - * - * @WIMAX_ST_UNINITIALIZED: [optional] Communication with the device - * is setup, but the device still requires some configuration - * before being operational. - * Some WiMAX API calls might work. - * - * @WIMAX_ST_RADIO_OFF: The device is fully up; radio is off (wether - * by hardware or software switches). - * It is recommended to always leave the device in this state - * after initialization. - * - * @WIMAX_ST_READY: The device is fully up and radio is on. - * - * @WIMAX_ST_SCANNING: [optional] The device has been instructed to - * scan. In this state, the device cannot be actively connected to - * a network. - * - * @WIMAX_ST_CONNECTING: The device is connecting to a network. This - * state exists because in some devices, the connect process can - * include a number of negotiations between user space, kernel - * space and the device. User space needs to know what the device - * is doing. If the connect sequence in a device is atomic and - * fast, the device can transition directly to CONNECTED - * - * @WIMAX_ST_CONNECTED: The device is connected to a network. - * - * @__WIMAX_ST_INVALID: This is an invalid state used to mark the - * maximum numeric value of states. - * - * Description: - * - * Transitions from one state to another one are atomic and can only - * be caused in kernel space with wimax_state_change(). To read the - * state, use wimax_state_get(). - * - * States starting with __ are internal and shall not be used or - * referred to by drivers or userspace. They look ugly, but that's the - * point -- if any use is made non-internal to the stack, it is easier - * to catch on review. - * - * All API operations [with well defined exceptions] will take the - * device mutex before starting and then check the state. If the state - * is %__WIMAX_ST_NULL, %WIMAX_ST_DOWN, %WIMAX_ST_UNINITIALIZED or - * %__WIMAX_ST_QUIESCING, it will drop the lock and quit with - * -%EINVAL, -%ENOMEDIUM, -%ENOTCONN or -%ESHUTDOWN. - * - * The order of the definitions is important, so we can do numerical - * comparisons (eg: < %WIMAX_ST_RADIO_OFF means the device is not ready - * to operate). - */ -/* - * The allowed state transitions are described in the table below - * (states in rows can go to states in columns where there is an X): - * - * UNINI RADIO READY SCAN CONNEC CONNEC - * NULL DOWN QUIESCING TIALIZED OFF NING TING TED - * NULL - x - * DOWN - x x x - * QUIESCING x - - * UNINITIALIZED x - x - * RADIO_OFF x - x - * READY x x - x x x - * SCANNING x x x - x x - * CONNECTING x x x x - x - * CONNECTED x x x - - * - * This table not available in kernel-doc because the formatting messes it up. - */ - enum wimax_st { - __WIMAX_ST_NULL = 0, - WIMAX_ST_DOWN, - __WIMAX_ST_QUIESCING, - WIMAX_ST_UNINITIALIZED, - WIMAX_ST_RADIO_OFF, - WIMAX_ST_READY, - WIMAX_ST_SCANNING, - WIMAX_ST_CONNECTING, - WIMAX_ST_CONNECTED, - __WIMAX_ST_INVALID /* Always keep last */ -}; - - -#endif /* #ifndef __LINUX__WIMAX_H__ */ diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 4395b28bb86c..4ea4c6e2383d 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -6,690 +6,11 @@ * Authors : Jean Tourrilhes - HPL - * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. */ - #ifndef _LINUX_WIRELESS_H #define _LINUX_WIRELESS_H -/************************** DOCUMENTATION **************************/ -/* - * Initial APIs (1996 -> onward) : - * ----------------------------- - * Basically, the wireless extensions are for now a set of standard ioctl - * call + /proc/net/wireless - * - * The entry /proc/net/wireless give statistics and information on the - * driver. - * This is better than having each driver having its entry because - * its centralised and we may remove the driver module safely. - * - * Ioctl are used to configure the driver and issue commands. This is - * better than command line options of insmod because we may want to - * change dynamically (while the driver is running) some parameters. - * - * The ioctl mechanimsm are copied from standard devices ioctl. - * We have the list of command plus a structure descibing the - * data exchanged... - * Note that to add these ioctl, I was obliged to modify : - * # net/core/dev.c (two place + add include) - * # net/ipv4/af_inet.c (one place + add include) - * - * /proc/net/wireless is a copy of /proc/net/dev. - * We have a structure for data passed from the driver to /proc/net/wireless - * Too add this, I've modified : - * # net/core/dev.c (two other places) - * # include/linux/netdevice.h (one place) - * # include/linux/proc_fs.h (one place) - * - * New driver API (2002 -> onward) : - * ------------------------------- - * This file is only concerned with the user space API and common definitions. - * The new driver API is defined and documented in : - * # include/net/iw_handler.h - * - * Note as well that /proc/net/wireless implementation has now moved in : - * # net/core/wireless.c - * - * Wireless Events (2002 -> onward) : - * -------------------------------- - * Events are defined at the end of this file, and implemented in : - * # net/core/wireless.c - * - * Other comments : - * -------------- - * Do not add here things that are redundant with other mechanisms - * (drivers init, ifconfig, /proc/net/dev, ...) and with are not - * wireless specific. - * - * These wireless extensions are not magic : each driver has to provide - * support for them... - * - * IMPORTANT NOTE : As everything in the kernel, this is very much a - * work in progress. Contact me if you have ideas of improvements... - */ - -/***************************** INCLUDES *****************************/ - -#include /* for __u* and __s* typedefs */ -#include /* for "struct sockaddr" et al */ -#include /* for IFNAMSIZ and co... */ - -/***************************** VERSION *****************************/ -/* - * This constant is used to know the availability of the wireless - * extensions and to know which version of wireless extensions it is - * (there is some stuff that will be added in the future...) - * I just plan to increment with each new version. - */ -#define WIRELESS_EXT 22 - -/* - * Changes : - * - * V2 to V3 - * -------- - * Alan Cox start some incompatibles changes. I've integrated a bit more. - * - Encryption renamed to Encode to avoid US regulation problems - * - Frequency changed from float to struct to avoid problems on old 386 - * - * V3 to V4 - * -------- - * - Add sensitivity - * - * V4 to V5 - * -------- - * - Missing encoding definitions in range - * - Access points stuff - * - * V5 to V6 - * -------- - * - 802.11 support (ESSID ioctls) - * - * V6 to V7 - * -------- - * - define IW_ESSID_MAX_SIZE and IW_MAX_AP - * - * V7 to V8 - * -------- - * - Changed my e-mail address - * - More 802.11 support (nickname, rate, rts, frag) - * - List index in frequencies - * - * V8 to V9 - * -------- - * - Support for 'mode of operation' (ad-hoc, managed...) - * - Support for unicast and multicast power saving - * - Change encoding to support larger tokens (>64 bits) - * - Updated iw_params (disable, flags) and use it for NWID - * - Extracted iw_point from iwreq for clarity - * - * V9 to V10 - * --------- - * - Add PM capability to range structure - * - Add PM modifier : MAX/MIN/RELATIVE - * - Add encoding option : IW_ENCODE_NOKEY - * - Add TxPower ioctls (work like TxRate) - * - * V10 to V11 - * ---------- - * - Add WE version in range (help backward/forward compatibility) - * - Add retry ioctls (work like PM) - * - * V11 to V12 - * ---------- - * - Add SIOCSIWSTATS to get /proc/net/wireless programatically - * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space - * - Add new statistics (frag, retry, beacon) - * - Add average quality (for user space calibration) - * - * V12 to V13 - * ---------- - * - Document creation of new driver API. - * - Extract union iwreq_data from struct iwreq (for new driver API). - * - Rename SIOCSIWNAME as SIOCSIWCOMMIT - * - * V13 to V14 - * ---------- - * - Wireless Events support : define struct iw_event - * - Define additional specific event numbers - * - Add "addr" and "param" fields in union iwreq_data - * - AP scanning stuff (SIOCSIWSCAN and friends) - * - * V14 to V15 - * ---------- - * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg - * - Make struct iw_freq signed (both m & e), add explicit padding - * - Add IWEVCUSTOM for driver specific event/scanning token - * - Add IW_MAX_GET_SPY for driver returning a lot of addresses - * - Add IW_TXPOW_RANGE for range of Tx Powers - * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points - * - Add IW_MODE_MONITOR for passive monitor - * - * V15 to V16 - * ---------- - * - Increase the number of bitrates in iw_range to 32 (for 802.11g) - * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) - * - Reshuffle struct iw_range for increases, add filler - * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses - * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support - * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" - * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index - * - * V16 to V17 - * ---------- - * - Add flags to frequency -> auto/fixed - * - Document (struct iw_quality *)->updated, add new flags (INVALID) - * - Wireless Event capability in struct iw_range - * - Add support for relative TxPower (yick !) - * - * V17 to V18 (From Jouni Malinen ) - * ---------- - * - Add support for WPA/WPA2 - * - Add extended encoding configuration (SIOCSIWENCODEEXT and - * SIOCGIWENCODEEXT) - * - Add SIOCSIWGENIE/SIOCGIWGENIE - * - Add SIOCSIWMLME - * - Add SIOCSIWPMKSA - * - Add struct iw_range bit field for supported encoding capabilities - * - Add optional scan request parameters for SIOCSIWSCAN - * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA - * related parameters (extensible up to 4096 parameter values) - * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, - * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND - * - * V18 to V19 - * ---------- - * - Remove (struct iw_point *)->pointer from events and streams - * - Remove header includes to help user space - * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 - * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros - * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM - * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros - * - * V19 to V20 - * ---------- - * - RtNetlink requests support (SET/GET) - * - * V20 to V21 - * ---------- - * - Remove (struct net_device *)->get_wireless_stats() - * - Change length in ESSID and NICK to strlen() instead of strlen()+1 - * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers - * - Power/Retry relative values no longer * 100000 - * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI - * - * V21 to V22 - * ---------- - * - Prevent leaking of kernel space in stream on 64 bits. - */ - -/**************************** CONSTANTS ****************************/ - -/* -------------------------- IOCTL LIST -------------------------- */ - -/* Wireless Identification */ -#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ -#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ -/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. - * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... - * Don't put the name of your driver there, it's useless. */ - -/* Basic operations */ -#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ -#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ -#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ -#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ -#define SIOCSIWMODE 0x8B06 /* set operation mode */ -#define SIOCGIWMODE 0x8B07 /* get operation mode */ -#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ -#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ - -/* Informative stuff */ -#define SIOCSIWRANGE 0x8B0A /* Unused */ -#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ -#define SIOCSIWPRIV 0x8B0C /* Unused */ -#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ -#define SIOCSIWSTATS 0x8B0E /* Unused */ -#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ -/* SIOCGIWSTATS is strictly used between user space and the kernel, and - * is never passed to the driver (i.e. the driver will never see it). */ - -/* Spy support (statistics per MAC address - used for Mobile IP support) */ -#define SIOCSIWSPY 0x8B10 /* set spy addresses */ -#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ -#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ -#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ - -/* Access Point manipulation */ -#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ -#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ -#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ -#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ -#define SIOCGIWSCAN 0x8B19 /* get scanning results */ - -/* 802.11 specific support */ -#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ -#define SIOCGIWESSID 0x8B1B /* get ESSID */ -#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ -#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ -/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit - * within the 'iwreq' structure, so we need to use the 'data' member to - * point to a string in user space, like it is done for RANGE... */ - -/* Other parameters useful in 802.11 and some other devices */ -#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ -#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ -#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ -#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ -#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ -#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ -#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ -#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ -#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ -#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ - -/* Encoding stuff (scrambling, hardware security, WEP...) */ -#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ -#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ -/* Power saving stuff (power management, unicast and multicast) */ -#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ -#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ - -/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). - * This ioctl uses struct iw_point and data buffer that includes IE id and len - * fields. More than one IE may be included in the request. Setting the generic - * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers - * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers - * are required to report the used IE as a wireless event, e.g., when - * associating with an AP. */ -#define SIOCSIWGENIE 0x8B30 /* set generic IE */ -#define SIOCGIWGENIE 0x8B31 /* get generic IE */ - -/* WPA : IEEE 802.11 MLME requests */ -#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses - * struct iw_mlme */ -/* WPA : Authentication mode parameters */ -#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ -#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ - -/* WPA : Extended version of encoding configuration */ -#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ -#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ - -/* WPA2 : PMKSA cache management */ -#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ - -/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ - -/* These 32 ioctl are wireless device private, for 16 commands. - * Each driver is free to use them for whatever purpose it chooses, - * however the driver *must* export the description of those ioctls - * with SIOCGIWPRIV and *must* use arguments as defined below. - * If you don't follow those rules, DaveM is going to hate you (reason : - * it make mixed 32/64bit operation impossible). - */ -#define SIOCIWFIRSTPRIV 0x8BE0 -#define SIOCIWLASTPRIV 0x8BFF -/* Previously, we were using SIOCDEVPRIVATE, but we now have our - * separate range because of collisions with other tools such as - * 'mii-tool'. - * We now have 32 commands, so a bit more space ;-). - * Also, all 'even' commands are only usable by root and don't return the - * content of ifr/iwr to user (but you are not obliged to use the set/get - * convention, just use every other two command). More details in iwpriv.c. - * And I repeat : you are not forced to use them with iwpriv, but you - * must be compliant with it. - */ - -/* ------------------------- IOCTL STUFF ------------------------- */ - -/* The first and the last (range) */ -#define SIOCIWFIRST 0x8B00 -#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ -#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) -#define IW_HANDLER(id, func) \ - [IW_IOCTL_IDX(id)] = func - -/* Odd : get (world access), even : set (root access) */ -#define IW_IS_SET(cmd) (!((cmd) & 0x1)) -#define IW_IS_GET(cmd) ((cmd) & 0x1) - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* Those are *NOT* ioctls, do not issue request on them !!! */ -/* Most events use the same identifier as ioctl requests */ - -#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ -#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ -#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ -#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ -#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ -#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) - * (scan results); This includes id and - * length fields. One IWEVGENIE may - * contain more than one IE. Scan - * results may contain one or more - * IWEVGENIE events. */ -#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure - * (struct iw_michaelmicfailure) - */ -#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. - * The data includes id and length - * fields and may contain more than one - * IE. This event is required in - * Managed mode if the driver - * generates its own WPA/RSN IE. This - * should be sent just before - * IWEVREGISTERED event for the - * association. */ -#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association - * Response. The data includes id and - * length fields and may contain more - * than one IE. This may be sent - * between IWEVASSOCREQIE and - * IWEVREGISTERED events for the - * association. */ -#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN - * pre-authentication - * (struct iw_pmkid_cand) */ - -#define IWEVFIRST 0x8C00 -#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) - -/* ------------------------- PRIVATE INFO ------------------------- */ -/* - * The following is used with SIOCGIWPRIV. It allow a driver to define - * the interface (name, type of data) for its private ioctl. - * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV - */ - -#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ -#define IW_PRIV_TYPE_NONE 0x0000 -#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ -#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ -#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ -#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ -#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ - -#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ - -#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ - -/* - * Note : if the number of args is fixed and the size < 16 octets, - * instead of passing a pointer we will put args in the iwreq struct... - */ - -/* ----------------------- OTHER CONSTANTS ----------------------- */ - -/* Maximum frequencies in the range struct */ -#define IW_MAX_FREQUENCIES 32 -/* Note : if you have something like 80 frequencies, - * don't increase this constant and don't fill the frequency list. - * The user will be able to set by channel anyway... */ - -/* Maximum bit rates in the range struct */ -#define IW_MAX_BITRATES 32 - -/* Maximum tx powers in the range struct */ -#define IW_MAX_TXPOWER 8 -/* Note : if you more than 8 TXPowers, just set the max and min or - * a few of them in the struct iw_range. */ - -/* Maximum of address that you may set with SPY */ -#define IW_MAX_SPY 8 - -/* Maximum of address that you may get in the - list of access points in range */ -#define IW_MAX_AP 64 - -/* Maximum size of the ESSID and NICKN strings */ -#define IW_ESSID_MAX_SIZE 32 - -/* Modes of operation */ -#define IW_MODE_AUTO 0 /* Let the driver decides */ -#define IW_MODE_ADHOC 1 /* Single cell network */ -#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ -#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ -#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ -#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ -#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ -#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ - -/* Statistics flags (bitmask in updated) */ -#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ -#define IW_QUAL_LEVEL_UPDATED 0x02 -#define IW_QUAL_NOISE_UPDATED 0x04 -#define IW_QUAL_ALL_UPDATED 0x07 -#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ -#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ -#define IW_QUAL_LEVEL_INVALID 0x20 -#define IW_QUAL_NOISE_INVALID 0x40 -#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ -#define IW_QUAL_ALL_INVALID 0x70 - -/* Frequency flags */ -#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ -#define IW_FREQ_FIXED 0x01 /* Force a specific value */ - -/* Maximum number of size of encoding token available - * they are listed in the range structure */ -#define IW_MAX_ENCODING_SIZES 8 - -/* Maximum size of the encoding token in bytes */ -#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ - -/* Flags for encoding (along with the token) */ -#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ -#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ -#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ -#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ -#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ -#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ -#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ -#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ -#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ - -/* Power management flags available (along with the value, if any) */ -#define IW_POWER_ON 0x0000 /* No details... */ -#define IW_POWER_TYPE 0xF000 /* Type of parameter */ -#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ -#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ -#define IW_POWER_MODE 0x0F00 /* Power Management mode */ -#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ -#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ -#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ -#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ -#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ -#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ -#define IW_POWER_MIN 0x0001 /* Value is a minimum */ -#define IW_POWER_MAX 0x0002 /* Value is a maximum */ -#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ - -/* Transmit Power flags available */ -#define IW_TXPOW_TYPE 0x00FF /* Type of value */ -#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ -#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ -#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ -#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ - -/* Retry limits and lifetime flags available */ -#define IW_RETRY_ON 0x0000 /* No details... */ -#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ -#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ -#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ -#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ -#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ -#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ -#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ -#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ -#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ - -/* Scanning request flags */ -#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ -#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ -#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ -#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ -#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ -#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ -#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ -#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ -#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ -/* struct iw_scan_req scan_type */ -#define IW_SCAN_TYPE_ACTIVE 0 -#define IW_SCAN_TYPE_PASSIVE 1 -/* Maximum size of returned data */ -#define IW_SCAN_MAX_DATA 4096 /* In bytes */ - -/* Scan capability flags - in (struct iw_range *)->scan_capa */ -#define IW_SCAN_CAPA_NONE 0x00 -#define IW_SCAN_CAPA_ESSID 0x01 -#define IW_SCAN_CAPA_BSSID 0x02 -#define IW_SCAN_CAPA_CHANNEL 0x04 -#define IW_SCAN_CAPA_MODE 0x08 -#define IW_SCAN_CAPA_RATE 0x10 -#define IW_SCAN_CAPA_TYPE 0x20 -#define IW_SCAN_CAPA_TIME 0x40 - -/* Max number of char in custom event - use multiple of them if needed */ -#define IW_CUSTOM_MAX 256 /* In bytes */ - -/* Generic information element */ -#define IW_GENERIC_IE_MAX 1024 - -/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ -#define IW_MLME_DEAUTH 0 -#define IW_MLME_DISASSOC 1 -#define IW_MLME_AUTH 2 -#define IW_MLME_ASSOC 3 - -/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ -#define IW_AUTH_INDEX 0x0FFF -#define IW_AUTH_FLAGS 0xF000 -/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) - * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the - * parameter that is being set/get to; value will be read/written to - * struct iw_param value field) */ -#define IW_AUTH_WPA_VERSION 0 -#define IW_AUTH_CIPHER_PAIRWISE 1 -#define IW_AUTH_CIPHER_GROUP 2 -#define IW_AUTH_KEY_MGMT 3 -#define IW_AUTH_TKIP_COUNTERMEASURES 4 -#define IW_AUTH_DROP_UNENCRYPTED 5 -#define IW_AUTH_80211_AUTH_ALG 6 -#define IW_AUTH_WPA_ENABLED 7 -#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 -#define IW_AUTH_ROAMING_CONTROL 9 -#define IW_AUTH_PRIVACY_INVOKED 10 -#define IW_AUTH_CIPHER_GROUP_MGMT 11 -#define IW_AUTH_MFP 12 - -/* IW_AUTH_WPA_VERSION values (bit field) */ -#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 -#define IW_AUTH_WPA_VERSION_WPA 0x00000002 -#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 - -/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT - * values (bit field) */ -#define IW_AUTH_CIPHER_NONE 0x00000001 -#define IW_AUTH_CIPHER_WEP40 0x00000002 -#define IW_AUTH_CIPHER_TKIP 0x00000004 -#define IW_AUTH_CIPHER_CCMP 0x00000008 -#define IW_AUTH_CIPHER_WEP104 0x00000010 -#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 - -/* IW_AUTH_KEY_MGMT values (bit field) */ -#define IW_AUTH_KEY_MGMT_802_1X 1 -#define IW_AUTH_KEY_MGMT_PSK 2 - -/* IW_AUTH_80211_AUTH_ALG values (bit field) */ -#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 -#define IW_AUTH_ALG_SHARED_KEY 0x00000002 -#define IW_AUTH_ALG_LEAP 0x00000004 - -/* IW_AUTH_ROAMING_CONTROL values */ -#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ -#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming - * control */ - -/* IW_AUTH_MFP (management frame protection) values */ -#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ -#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ -#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ - -/* SIOCSIWENCODEEXT definitions */ -#define IW_ENCODE_SEQ_MAX_SIZE 8 -/* struct iw_encode_ext ->alg */ -#define IW_ENCODE_ALG_NONE 0 -#define IW_ENCODE_ALG_WEP 1 -#define IW_ENCODE_ALG_TKIP 2 -#define IW_ENCODE_ALG_CCMP 3 -#define IW_ENCODE_ALG_PMK 4 -#define IW_ENCODE_ALG_AES_CMAC 5 -/* struct iw_encode_ext ->ext_flags */ -#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 -#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 -#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 -#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 - -/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ -#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ -#define IW_MICFAILURE_GROUP 0x00000004 -#define IW_MICFAILURE_PAIRWISE 0x00000008 -#define IW_MICFAILURE_STAKEY 0x00000010 -#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) - */ - -/* Bit field values for enc_capa in struct iw_range */ -#define IW_ENC_CAPA_WPA 0x00000001 -#define IW_ENC_CAPA_WPA2 0x00000002 -#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 -#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 -#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 - -/* Event capability macros - in (struct iw_range *)->event_capa - * Because we have more than 32 possible events, we use an array of - * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ -#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ - (cmd - SIOCIWFIRSTPRIV + 0x60) : \ - (cmd - SIOCIWFIRST)) -#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) -#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) -/* Event capability constants - event autogenerated by the kernel - * This list is valid for most 802.11 devices, customise as needed... */ -#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ - IW_EVENT_CAPA_MASK(0x8B06) | \ - IW_EVENT_CAPA_MASK(0x8B1A)) -#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) -/* "Easy" macro to set events in iw_range (less efficient) */ -#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) -#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } - - -/****************************** TYPES ******************************/ - -/* --------------------------- SUBTYPES --------------------------- */ -/* - * Generic format for most parameters that fit in an int - */ -struct iw_param -{ - __s32 value; /* The value of the parameter itself */ - __u8 fixed; /* Hardware should not use auto select */ - __u8 disabled; /* Disable the feature */ - __u16 flags; /* Various specifc flags (if any) */ -}; - -/* - * For all data larger than 16 octets, we need to use a - * pointer to memory allocated in user space. - */ -struct iw_point -{ - void __user *pointer; /* Pointer to the data (in user space) */ - __u16 length; /* number of fields or size in bytes */ - __u16 flags; /* Optional params */ -}; +#include -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include @@ -700,432 +21,6 @@ struct compat_iw_point { __u16 flags; }; #endif -#endif - -/* - * A frequency - * For numbers lower than 10^9, we encode the number in 'm' and - * set 'e' to 0 - * For number greater than 10^9, we divide it by the lowest power - * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... - * The power of 10 is in 'e', the result of the division is in 'm'. - */ -struct iw_freq -{ - __s32 m; /* Mantissa */ - __s16 e; /* Exponent */ - __u8 i; /* List index (when in range struct) */ - __u8 flags; /* Flags (fixed/auto) */ -}; - -/* - * Quality of the link - */ -struct iw_quality -{ - __u8 qual; /* link quality (%retries, SNR, - %missed beacons or better...) */ - __u8 level; /* signal level (dBm) */ - __u8 noise; /* noise level (dBm) */ - __u8 updated; /* Flags to know if updated */ -}; - -/* - * Packet discarded in the wireless adapter due to - * "wireless" specific problems... - * Note : the list of counter and statistics in net_device_stats - * is already pretty exhaustive, and you should use that first. - * This is only additional stats... - */ -struct iw_discarded -{ - __u32 nwid; /* Rx : Wrong nwid/essid */ - __u32 code; /* Rx : Unable to code/decode (WEP) */ - __u32 fragment; /* Rx : Can't perform MAC reassembly */ - __u32 retries; /* Tx : Max MAC retries num reached */ - __u32 misc; /* Others cases */ -}; - -/* - * Packet/Time period missed in the wireless adapter due to - * "wireless" specific problems... - */ -struct iw_missed -{ - __u32 beacon; /* Missed beacons/superframe */ -}; - -/* - * Quality range (for spy threshold) - */ -struct iw_thrspy -{ - struct sockaddr addr; /* Source address (hw/mac) */ - struct iw_quality qual; /* Quality of the link */ - struct iw_quality low; /* Low threshold */ - struct iw_quality high; /* High threshold */ -}; - -/* - * Optional data for scan request - * - * Note: these optional parameters are controlling parameters for the - * scanning behavior, these do not apply to getting scan results - * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and - * provide a merged results with all BSSes even if the previous scan - * request limited scanning to a subset, e.g., by specifying an SSID. - * Especially, scan results are required to include an entry for the - * current BSS if the driver is in Managed mode and associated with an AP. - */ -struct iw_scan_req -{ - __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ - __u8 essid_len; - __u8 num_channels; /* num entries in channel_list; - * 0 = scan all allowed channels */ - __u8 flags; /* reserved as padding; use zero, this may - * be used in the future for adding flags - * to request different scan behavior */ - struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or - * individual address of a specific BSS */ - - /* - * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using - * the current ESSID. This allows scan requests for specific ESSID - * without having to change the current ESSID and potentially breaking - * the current association. - */ - __u8 essid[IW_ESSID_MAX_SIZE]; - - /* - * Optional parameters for changing the default scanning behavior. - * These are based on the MLME-SCAN.request from IEEE Std 802.11. - * TU is 1.024 ms. If these are set to 0, driver is expected to use - * reasonable default values. min_channel_time defines the time that - * will be used to wait for the first reply on each channel. If no - * replies are received, next channel will be scanned after this. If - * replies are received, total time waited on the channel is defined by - * max_channel_time. - */ - __u32 min_channel_time; /* in TU */ - __u32 max_channel_time; /* in TU */ - - struct iw_freq channel_list[IW_MAX_FREQUENCIES]; -}; - -/* ------------------------- WPA SUPPORT ------------------------- */ - -/* - * Extended data structure for get/set encoding (this is used with - * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* - * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and - * only the data contents changes (key data -> this structure, including - * key data). - * - * If the new key is the first group key, it will be set as the default - * TX key. Otherwise, default TX key index is only changed if - * IW_ENCODE_EXT_SET_TX_KEY flag is set. - * - * Key will be changed with SIOCSIWENCODEEXT in all cases except for - * special "change TX key index" operation which is indicated by setting - * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. - * - * tx_seq/rx_seq are only used when respective - * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal - * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start - * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally - * used only by an Authenticator (AP or an IBSS station) to get the - * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and - * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for - * debugging/testing. - */ -struct iw_encode_ext -{ - __u32 ext_flags; /* IW_ENCODE_EXT_* */ - __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ - struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast - * (group) keys or unicast address for - * individual keys */ - __u16 alg; /* IW_ENCODE_ALG_* */ - __u16 key_len; - __u8 key[0]; -}; - -/* SIOCSIWMLME data */ -struct iw_mlme -{ - __u16 cmd; /* IW_MLME_* */ - __u16 reason_code; - struct sockaddr addr; -}; - -/* SIOCSIWPMKSA data */ -#define IW_PMKSA_ADD 1 -#define IW_PMKSA_REMOVE 2 -#define IW_PMKSA_FLUSH 3 - -#define IW_PMKID_LEN 16 - -struct iw_pmksa -{ - __u32 cmd; /* IW_PMKSA_* */ - struct sockaddr bssid; - __u8 pmkid[IW_PMKID_LEN]; -}; - -/* IWEVMICHAELMICFAILURE data */ -struct iw_michaelmicfailure -{ - __u32 flags; - struct sockaddr src_addr; - __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ -}; - -/* IWEVPMKIDCAND data */ -#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ -struct iw_pmkid_cand -{ - __u32 flags; /* IW_PMKID_CAND_* */ - __u32 index; /* the smaller the index, the higher the - * priority */ - struct sockaddr bssid; -}; - -/* ------------------------ WIRELESS STATS ------------------------ */ -/* - * Wireless statistics (used for /proc/net/wireless) - */ -struct iw_statistics -{ - __u16 status; /* Status - * - device dependent for now */ - - struct iw_quality qual; /* Quality of the link - * (instant/mean/max) */ - struct iw_discarded discard; /* Packet discarded counts */ - struct iw_missed miss; /* Packet missed counts */ -}; - -/* ------------------------ IOCTL REQUEST ------------------------ */ -/* - * This structure defines the payload of an ioctl, and is used - * below. - * - * Note that this structure should fit on the memory footprint - * of iwreq (which is the same as ifreq), which mean a max size of - * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... - * You should check this when increasing the structures defined - * above in this file... - */ -union iwreq_data -{ - /* Config - generic */ - char name[IFNAMSIZ]; - /* Name : used to verify the presence of wireless extensions. - * Name of the protocol/provider... */ - - struct iw_point essid; /* Extended network name */ - struct iw_param nwid; /* network id (or domain - the cell) */ - struct iw_freq freq; /* frequency or channel : - * 0-1000 = channel - * > 1000 = frequency in Hz */ - - struct iw_param sens; /* signal level threshold */ - struct iw_param bitrate; /* default bit rate */ - struct iw_param txpower; /* default transmit power */ - struct iw_param rts; /* RTS threshold threshold */ - struct iw_param frag; /* Fragmentation threshold */ - __u32 mode; /* Operation mode */ - struct iw_param retry; /* Retry limits & lifetime */ - - struct iw_point encoding; /* Encoding stuff : tokens */ - struct iw_param power; /* PM duration/timeout */ - struct iw_quality qual; /* Quality part of statistics */ - - struct sockaddr ap_addr; /* Access point address */ - struct sockaddr addr; /* Destination address (hw/mac) */ - - struct iw_param param; /* Other small parameters */ - struct iw_point data; /* Other large parameters */ -}; - -/* - * The structure to exchange data for ioctl. - * This structure is the same as 'struct ifreq', but (re)defined for - * convenience... - * Do I need to remind you about structure size (32 octets) ? - */ -struct iwreq -{ - union - { - char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ - } ifr_ifrn; - - /* Data part (defined just above) */ - union iwreq_data u; -}; - -/* -------------------------- IOCTL DATA -------------------------- */ -/* - * For those ioctl which want to exchange mode data that what could - * fit in the above structure... - */ - -/* - * Range of parameters - */ - -struct iw_range -{ - /* Informative stuff (to choose between different interface) */ - __u32 throughput; /* To give an idea... */ - /* In theory this value should be the maximum benchmarked - * TCP/IP throughput, because with most of these devices the - * bit rate is meaningless (overhead an co) to estimate how - * fast the connection will go and pick the fastest one. - * I suggest people to play with Netperf or any benchmark... - */ - - /* NWID (or domain id) */ - __u32 min_nwid; /* Minimal NWID we are able to set */ - __u32 max_nwid; /* Maximal NWID we are able to set */ - - /* Old Frequency (backward compat - moved lower ) */ - __u16 old_num_channels; - __u8 old_num_frequency; - - /* Scan capabilities */ - __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ - - /* Wireless event capability bitmasks */ - __u32 event_capa[6]; - - /* signal level threshold range */ - __s32 sensitivity; - - /* Quality of link & SNR stuff */ - /* Quality range (link, level, noise) - * If the quality is absolute, it will be in the range [0 ; max_qual], - * if the quality is dBm, it will be in the range [max_qual ; 0]. - * Don't forget that we use 8 bit arithmetics... */ - struct iw_quality max_qual; /* Quality of the link */ - /* This should contain the average/typical values of the quality - * indicator. This should be the threshold between a "good" and - * a "bad" link (example : monitor going from green to orange). - * Currently, user space apps like quality monitors don't have any - * way to calibrate the measurement. With this, they can split - * the range between 0 and max_qual in different quality level - * (using a geometric subdivision centered on the average). - * I expect that people doing the user space apps will feedback - * us on which value we need to put in each driver... */ - struct iw_quality avg_qual; /* Quality of the link */ - - /* Rates */ - __u8 num_bitrates; /* Number of entries in the list */ - __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ - - /* RTS threshold */ - __s32 min_rts; /* Minimal RTS threshold */ - __s32 max_rts; /* Maximal RTS threshold */ - - /* Frag threshold */ - __s32 min_frag; /* Minimal frag threshold */ - __s32 max_frag; /* Maximal frag threshold */ - - /* Power Management duration & timeout */ - __s32 min_pmp; /* Minimal PM period */ - __s32 max_pmp; /* Maximal PM period */ - __s32 min_pmt; /* Minimal PM timeout */ - __s32 max_pmt; /* Maximal PM timeout */ - __u16 pmp_flags; /* How to decode max/min PM period */ - __u16 pmt_flags; /* How to decode max/min PM timeout */ - __u16 pm_capa; /* What PM options are supported */ - - /* Encoder stuff */ - __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ - __u8 num_encoding_sizes; /* Number of entry in the list */ - __u8 max_encoding_tokens; /* Max number of tokens */ - /* For drivers that need a "login/passwd" form */ - __u8 encoding_login_index; /* token index for login token */ - - /* Transmit power */ - __u16 txpower_capa; /* What options are supported */ - __u8 num_txpower; /* Number of entries in the list */ - __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ - - /* Wireless Extension version info */ - __u8 we_version_compiled; /* Must be WIRELESS_EXT */ - __u8 we_version_source; /* Last update of source */ - - /* Retry limits and lifetime */ - __u16 retry_capa; /* What retry options are supported */ - __u16 retry_flags; /* How to decode max/min retry limit */ - __u16 r_time_flags; /* How to decode max/min retry life */ - __s32 min_retry; /* Minimal number of retries */ - __s32 max_retry; /* Maximal number of retries */ - __s32 min_r_time; /* Minimal retry lifetime */ - __s32 max_r_time; /* Maximal retry lifetime */ - - /* Frequency */ - __u16 num_channels; /* Number of channels [0; num - 1] */ - __u8 num_frequency; /* Number of entry in the list */ - struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ - /* Note : this frequency list doesn't need to fit channel numbers, - * because each entry contain its channel index */ - - __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ -}; - -/* - * Private ioctl interface information - */ - -struct iw_priv_args -{ - __u32 cmd; /* Number of the ioctl to issue */ - __u16 set_args; /* Type and number of args */ - __u16 get_args; /* Type and number of args */ - char name[IFNAMSIZ]; /* Name of the extension */ -}; - -/* ----------------------- WIRELESS EVENTS ----------------------- */ -/* - * Wireless events are carried through the rtnetlink socket to user - * space. They are encapsulated in the IFLA_WIRELESS field of - * a RTM_NEWLINK message. - */ - -/* - * A Wireless Event. Contains basically the same data as the ioctl... - */ -struct iw_event -{ - __u16 len; /* Real length of this stuff */ - __u16 cmd; /* Wireless IOCTL */ - union iwreq_data u; /* IOCTL fixed payload */ -}; - -/* Size of the Event prefix (including padding and alignement junk) */ -#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) -/* Size of the various events */ -#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) -#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) -#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) - -/* iw_point events are special. First, the payload (extra data) come at - * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, - * we omit the pointer, so start at an offset. */ -#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ - (char *) NULL) -#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ - IW_EV_POINT_OFF) - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT struct __compat_iw_event { __u16 len; /* Real length of this stuff */ @@ -1146,17 +41,4 @@ struct __compat_iw_event { (IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \ IW_EV_COMPAT_POINT_OFF) #endif -#endif - -/* Size of the Event prefix when packed in stream */ -#define IW_EV_LCP_PK_LEN (4) -/* Size of the various events when packed in stream */ -#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) -#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) -#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) -#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) -#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) -#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) -#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) - #endif /* _LINUX_WIRELESS_H */ diff --git a/include/linux/x25.h b/include/linux/x25.h deleted file mode 100644 index 810cce6737ea..000000000000 --- a/include/linux/x25.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * These are the public elements of the Linux kernel X.25 implementation. - * - * History - * mar/20/00 Daniela Squassoni Disabling/enabling of facilities - * negotiation. - * apr/02/05 Shaun Pereira Selective sub address matching with - * call user data - */ - -#ifndef X25_KERNEL_H -#define X25_KERNEL_H - -#include -#include - -#define SIOCX25GSUBSCRIP (SIOCPROTOPRIVATE + 0) -#define SIOCX25SSUBSCRIP (SIOCPROTOPRIVATE + 1) -#define SIOCX25GFACILITIES (SIOCPROTOPRIVATE + 2) -#define SIOCX25SFACILITIES (SIOCPROTOPRIVATE + 3) -#define SIOCX25GCALLUSERDATA (SIOCPROTOPRIVATE + 4) -#define SIOCX25SCALLUSERDATA (SIOCPROTOPRIVATE + 5) -#define SIOCX25GCAUSEDIAG (SIOCPROTOPRIVATE + 6) -#define SIOCX25SCUDMATCHLEN (SIOCPROTOPRIVATE + 7) -#define SIOCX25CALLACCPTAPPRV (SIOCPROTOPRIVATE + 8) -#define SIOCX25SENDCALLACCPT (SIOCPROTOPRIVATE + 9) -#define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10) -#define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11) -#define SIOCX25SCAUSEDIAG (SIOCPROTOPRIVATE + 12) - -/* - * Values for {get,set}sockopt. - */ -#define X25_QBITINCL 1 - -/* - * X.25 Packet Size values. - */ -#define X25_PS16 4 -#define X25_PS32 5 -#define X25_PS64 6 -#define X25_PS128 7 -#define X25_PS256 8 -#define X25_PS512 9 -#define X25_PS1024 10 -#define X25_PS2048 11 -#define X25_PS4096 12 - -/* - * An X.121 address, it is held as ASCII text, null terminated, up to 15 - * digits and a null terminator. - */ -struct x25_address { - char x25_addr[16]; -}; - -/* - * Linux X.25 Address structure, used for bind, and connect mostly. - */ -struct sockaddr_x25 { - __kernel_sa_family_t sx25_family; /* Must be AF_X25 */ - struct x25_address sx25_addr; /* X.121 Address */ -}; - -/* - * DTE/DCE subscription options. - * - * As this is missing lots of options, user should expect major - * changes of this structure in 2.5.x which might break compatibilty. - * The somewhat ugly dimension 200-sizeof() is needed to maintain - * backward compatibility. - */ -struct x25_subscrip_struct { - char device[200-sizeof(unsigned long)]; - unsigned long global_facil_mask; /* 0 to disable negotiation */ - unsigned int extended; -}; - -/* values for above global_facil_mask */ - -#define X25_MASK_REVERSE 0x01 -#define X25_MASK_THROUGHPUT 0x02 -#define X25_MASK_PACKET_SIZE 0x04 -#define X25_MASK_WINDOW_SIZE 0x08 - -#define X25_MASK_CALLING_AE 0x10 -#define X25_MASK_CALLED_AE 0x20 - - -/* - * Routing table control structure. - */ -struct x25_route_struct { - struct x25_address address; - unsigned int sigdigits; - char device[200]; -}; - -/* - * Facilities structure. - */ -struct x25_facilities { - unsigned int winsize_in, winsize_out; - unsigned int pacsize_in, pacsize_out; - unsigned int throughput; - unsigned int reverse; -}; - -/* -* ITU DTE facilities -* Only the called and calling address -* extension are currently implemented. -* The rest are in place to avoid the struct -* changing size if someone needs them later -*/ - -struct x25_dte_facilities { - __u16 delay_cumul; - __u16 delay_target; - __u16 delay_max; - __u8 min_throughput; - __u8 expedited; - __u8 calling_len; - __u8 called_len; - __u8 calling_ae[20]; - __u8 called_ae[20]; -}; - -/* - * Call User Data structure. - */ -struct x25_calluserdata { - unsigned int cudlength; - unsigned char cuddata[128]; -}; - -/* - * Call clearing Cause and Diagnostic structure. - */ -struct x25_causediag { - unsigned char cause; - unsigned char diagnostic; -}; - -/* - * Further optional call user data match length selection - */ -struct x25_subaddr { - unsigned int cudmatchlength; -}; - -#endif diff --git a/include/linux/xattr.h b/include/linux/xattr.h index cc13e1115970..fdbafc6841cf 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -10,61 +10,11 @@ #ifndef _LINUX_XATTR_H #define _LINUX_XATTR_H -#define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ -#define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ - -/* Namespaces */ -#define XATTR_OS2_PREFIX "os2." -#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1) - -#define XATTR_SECURITY_PREFIX "security." -#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1) - -#define XATTR_SYSTEM_PREFIX "system." -#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1) - -#define XATTR_TRUSTED_PREFIX "trusted." -#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1) - -#define XATTR_USER_PREFIX "user." -#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) - -/* Security namespace */ -#define XATTR_EVM_SUFFIX "evm" -#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX - -#define XATTR_IMA_SUFFIX "ima" -#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX - -#define XATTR_SELINUX_SUFFIX "selinux" -#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX - -#define XATTR_SMACK_SUFFIX "SMACK64" -#define XATTR_SMACK_IPIN "SMACK64IPIN" -#define XATTR_SMACK_IPOUT "SMACK64IPOUT" -#define XATTR_SMACK_EXEC "SMACK64EXEC" -#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE" -#define XATTR_SMACK_MMAP "SMACK64MMAP" -#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX -#define XATTR_NAME_SMACKIPIN XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN -#define XATTR_NAME_SMACKIPOUT XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT -#define XATTR_NAME_SMACKEXEC XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC -#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE -#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP - -#define XATTR_CAPS_SUFFIX "capability" -#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX - -#define XATTR_POSIX_ACL_ACCESS "posix_acl_access" -#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS -#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default" -#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT - -#ifdef __KERNEL__ #include #include #include +#include struct inode; struct dentry; @@ -147,6 +97,4 @@ ssize_t simple_xattr_list(struct simple_xattrs *xattrs, char *buffer, void simple_xattr_list_add(struct simple_xattrs *xattrs, struct simple_xattr *new_xattr); -#endif /* __KERNEL__ */ - #endif /* _LINUX_XATTR_H */ diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h deleted file mode 100644 index 28e493b5b94c..000000000000 --- a/include/linux/xfrm.h +++ /dev/null @@ -1,506 +0,0 @@ -#ifndef _LINUX_XFRM_H -#define _LINUX_XFRM_H - -#include - -/* All of the structures in this file may not change size as they are - * passed into the kernel from userspace via netlink sockets. - */ - -/* Structure to encapsulate addresses. I do not want to use - * "standard" structure. My apologies. - */ -typedef union { - __be32 a4; - __be32 a6[4]; -} xfrm_address_t; - -/* Ident of a specific xfrm_state. It is used on input to lookup - * the state by (spi,daddr,ah/esp) or to store information about - * spi, protocol and tunnel address on output. - */ -struct xfrm_id { - xfrm_address_t daddr; - __be32 spi; - __u8 proto; -}; - -struct xfrm_sec_ctx { - __u8 ctx_doi; - __u8 ctx_alg; - __u16 ctx_len; - __u32 ctx_sid; - char ctx_str[0]; -}; - -/* Security Context Domains of Interpretation */ -#define XFRM_SC_DOI_RESERVED 0 -#define XFRM_SC_DOI_LSM 1 - -/* Security Context Algorithms */ -#define XFRM_SC_ALG_RESERVED 0 -#define XFRM_SC_ALG_SELINUX 1 - -/* Selector, used as selector both on policy rules (SPD) and SAs. */ - -struct xfrm_selector { - xfrm_address_t daddr; - xfrm_address_t saddr; - __be16 dport; - __be16 dport_mask; - __be16 sport; - __be16 sport_mask; - __u16 family; - __u8 prefixlen_d; - __u8 prefixlen_s; - __u8 proto; - int ifindex; - __kernel_uid32_t user; -}; - -#define XFRM_INF (~(__u64)0) - -struct xfrm_lifetime_cfg { - __u64 soft_byte_limit; - __u64 hard_byte_limit; - __u64 soft_packet_limit; - __u64 hard_packet_limit; - __u64 soft_add_expires_seconds; - __u64 hard_add_expires_seconds; - __u64 soft_use_expires_seconds; - __u64 hard_use_expires_seconds; -}; - -struct xfrm_lifetime_cur { - __u64 bytes; - __u64 packets; - __u64 add_time; - __u64 use_time; -}; - -struct xfrm_replay_state { - __u32 oseq; - __u32 seq; - __u32 bitmap; -}; - -#define XFRMA_REPLAY_ESN_MAX 4096 - -struct xfrm_replay_state_esn { - unsigned int bmp_len; - __u32 oseq; - __u32 seq; - __u32 oseq_hi; - __u32 seq_hi; - __u32 replay_window; - __u32 bmp[0]; -}; - -struct xfrm_algo { - char alg_name[64]; - unsigned int alg_key_len; /* in bits */ - char alg_key[0]; -}; - -struct xfrm_algo_auth { - char alg_name[64]; - unsigned int alg_key_len; /* in bits */ - unsigned int alg_trunc_len; /* in bits */ - char alg_key[0]; -}; - -struct xfrm_algo_aead { - char alg_name[64]; - unsigned int alg_key_len; /* in bits */ - unsigned int alg_icv_len; /* in bits */ - char alg_key[0]; -}; - -struct xfrm_stats { - __u32 replay_window; - __u32 replay; - __u32 integrity_failed; -}; - -enum { - XFRM_POLICY_TYPE_MAIN = 0, - XFRM_POLICY_TYPE_SUB = 1, - XFRM_POLICY_TYPE_MAX = 2, - XFRM_POLICY_TYPE_ANY = 255 -}; - -enum { - XFRM_POLICY_IN = 0, - XFRM_POLICY_OUT = 1, - XFRM_POLICY_FWD = 2, - XFRM_POLICY_MASK = 3, - XFRM_POLICY_MAX = 3 -}; - -enum { - XFRM_SHARE_ANY, /* No limitations */ - XFRM_SHARE_SESSION, /* For this session only */ - XFRM_SHARE_USER, /* For this user only */ - XFRM_SHARE_UNIQUE /* Use once */ -}; - -#define XFRM_MODE_TRANSPORT 0 -#define XFRM_MODE_TUNNEL 1 -#define XFRM_MODE_ROUTEOPTIMIZATION 2 -#define XFRM_MODE_IN_TRIGGER 3 -#define XFRM_MODE_BEET 4 -#define XFRM_MODE_MAX 5 - -/* Netlink configuration messages. */ -enum { - XFRM_MSG_BASE = 0x10, - - XFRM_MSG_NEWSA = 0x10, -#define XFRM_MSG_NEWSA XFRM_MSG_NEWSA - XFRM_MSG_DELSA, -#define XFRM_MSG_DELSA XFRM_MSG_DELSA - XFRM_MSG_GETSA, -#define XFRM_MSG_GETSA XFRM_MSG_GETSA - - XFRM_MSG_NEWPOLICY, -#define XFRM_MSG_NEWPOLICY XFRM_MSG_NEWPOLICY - XFRM_MSG_DELPOLICY, -#define XFRM_MSG_DELPOLICY XFRM_MSG_DELPOLICY - XFRM_MSG_GETPOLICY, -#define XFRM_MSG_GETPOLICY XFRM_MSG_GETPOLICY - - XFRM_MSG_ALLOCSPI, -#define XFRM_MSG_ALLOCSPI XFRM_MSG_ALLOCSPI - XFRM_MSG_ACQUIRE, -#define XFRM_MSG_ACQUIRE XFRM_MSG_ACQUIRE - XFRM_MSG_EXPIRE, -#define XFRM_MSG_EXPIRE XFRM_MSG_EXPIRE - - XFRM_MSG_UPDPOLICY, -#define XFRM_MSG_UPDPOLICY XFRM_MSG_UPDPOLICY - XFRM_MSG_UPDSA, -#define XFRM_MSG_UPDSA XFRM_MSG_UPDSA - - XFRM_MSG_POLEXPIRE, -#define XFRM_MSG_POLEXPIRE XFRM_MSG_POLEXPIRE - - XFRM_MSG_FLUSHSA, -#define XFRM_MSG_FLUSHSA XFRM_MSG_FLUSHSA - XFRM_MSG_FLUSHPOLICY, -#define XFRM_MSG_FLUSHPOLICY XFRM_MSG_FLUSHPOLICY - - XFRM_MSG_NEWAE, -#define XFRM_MSG_NEWAE XFRM_MSG_NEWAE - XFRM_MSG_GETAE, -#define XFRM_MSG_GETAE XFRM_MSG_GETAE - - XFRM_MSG_REPORT, -#define XFRM_MSG_REPORT XFRM_MSG_REPORT - - XFRM_MSG_MIGRATE, -#define XFRM_MSG_MIGRATE XFRM_MSG_MIGRATE - - XFRM_MSG_NEWSADINFO, -#define XFRM_MSG_NEWSADINFO XFRM_MSG_NEWSADINFO - XFRM_MSG_GETSADINFO, -#define XFRM_MSG_GETSADINFO XFRM_MSG_GETSADINFO - - XFRM_MSG_NEWSPDINFO, -#define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO - XFRM_MSG_GETSPDINFO, -#define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO - - XFRM_MSG_MAPPING, -#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING - __XFRM_MSG_MAX -}; -#define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) - -#define XFRM_NR_MSGTYPES (XFRM_MSG_MAX + 1 - XFRM_MSG_BASE) - -/* - * Generic LSM security context for comunicating to user space - * NOTE: Same format as sadb_x_sec_ctx - */ -struct xfrm_user_sec_ctx { - __u16 len; - __u16 exttype; - __u8 ctx_alg; /* LSMs: e.g., selinux == 1 */ - __u8 ctx_doi; - __u16 ctx_len; -}; - -struct xfrm_user_tmpl { - struct xfrm_id id; - __u16 family; - xfrm_address_t saddr; - __u32 reqid; - __u8 mode; - __u8 share; - __u8 optional; - __u32 aalgos; - __u32 ealgos; - __u32 calgos; -}; - -struct xfrm_encap_tmpl { - __u16 encap_type; - __be16 encap_sport; - __be16 encap_dport; - xfrm_address_t encap_oa; -}; - -/* AEVENT flags */ -enum xfrm_ae_ftype_t { - XFRM_AE_UNSPEC, - XFRM_AE_RTHR=1, /* replay threshold*/ - XFRM_AE_RVAL=2, /* replay value */ - XFRM_AE_LVAL=4, /* lifetime value */ - XFRM_AE_ETHR=8, /* expiry timer threshold */ - XFRM_AE_CR=16, /* Event cause is replay update */ - XFRM_AE_CE=32, /* Event cause is timer expiry */ - XFRM_AE_CU=64, /* Event cause is policy update */ - __XFRM_AE_MAX - -#define XFRM_AE_MAX (__XFRM_AE_MAX - 1) -}; - -struct xfrm_userpolicy_type { - __u8 type; - __u16 reserved1; - __u8 reserved2; -}; - -/* Netlink message attributes. */ -enum xfrm_attr_type_t { - XFRMA_UNSPEC, - XFRMA_ALG_AUTH, /* struct xfrm_algo */ - XFRMA_ALG_CRYPT, /* struct xfrm_algo */ - XFRMA_ALG_COMP, /* struct xfrm_algo */ - XFRMA_ENCAP, /* struct xfrm_algo + struct xfrm_encap_tmpl */ - XFRMA_TMPL, /* 1 or more struct xfrm_user_tmpl */ - XFRMA_SA, /* struct xfrm_usersa_info */ - XFRMA_POLICY, /*struct xfrm_userpolicy_info */ - XFRMA_SEC_CTX, /* struct xfrm_sec_ctx */ - XFRMA_LTIME_VAL, - XFRMA_REPLAY_VAL, - XFRMA_REPLAY_THRESH, - XFRMA_ETIMER_THRESH, - XFRMA_SRCADDR, /* xfrm_address_t */ - XFRMA_COADDR, /* xfrm_address_t */ - XFRMA_LASTUSED, /* unsigned long */ - XFRMA_POLICY_TYPE, /* struct xfrm_userpolicy_type */ - XFRMA_MIGRATE, - XFRMA_ALG_AEAD, /* struct xfrm_algo_aead */ - XFRMA_KMADDRESS, /* struct xfrm_user_kmaddress */ - XFRMA_ALG_AUTH_TRUNC, /* struct xfrm_algo_auth */ - XFRMA_MARK, /* struct xfrm_mark */ - XFRMA_TFCPAD, /* __u32 */ - XFRMA_REPLAY_ESN_VAL, /* struct xfrm_replay_esn */ - __XFRMA_MAX - -#define XFRMA_MAX (__XFRMA_MAX - 1) -}; - -struct xfrm_mark { - __u32 v; /* value */ - __u32 m; /* mask */ -}; - -enum xfrm_sadattr_type_t { - XFRMA_SAD_UNSPEC, - XFRMA_SAD_CNT, - XFRMA_SAD_HINFO, - __XFRMA_SAD_MAX - -#define XFRMA_SAD_MAX (__XFRMA_SAD_MAX - 1) -}; - -struct xfrmu_sadhinfo { - __u32 sadhcnt; /* current hash bkts */ - __u32 sadhmcnt; /* max allowed hash bkts */ -}; - -enum xfrm_spdattr_type_t { - XFRMA_SPD_UNSPEC, - XFRMA_SPD_INFO, - XFRMA_SPD_HINFO, - __XFRMA_SPD_MAX - -#define XFRMA_SPD_MAX (__XFRMA_SPD_MAX - 1) -}; - -struct xfrmu_spdinfo { - __u32 incnt; - __u32 outcnt; - __u32 fwdcnt; - __u32 inscnt; - __u32 outscnt; - __u32 fwdscnt; -}; - -struct xfrmu_spdhinfo { - __u32 spdhcnt; - __u32 spdhmcnt; -}; - -struct xfrm_usersa_info { - struct xfrm_selector sel; - struct xfrm_id id; - xfrm_address_t saddr; - struct xfrm_lifetime_cfg lft; - struct xfrm_lifetime_cur curlft; - struct xfrm_stats stats; - __u32 seq; - __u32 reqid; - __u16 family; - __u8 mode; /* XFRM_MODE_xxx */ - __u8 replay_window; - __u8 flags; -#define XFRM_STATE_NOECN 1 -#define XFRM_STATE_DECAP_DSCP 2 -#define XFRM_STATE_NOPMTUDISC 4 -#define XFRM_STATE_WILDRECV 8 -#define XFRM_STATE_ICMP 16 -#define XFRM_STATE_AF_UNSPEC 32 -#define XFRM_STATE_ALIGN4 64 -#define XFRM_STATE_ESN 128 -}; - -struct xfrm_usersa_id { - xfrm_address_t daddr; - __be32 spi; - __u16 family; - __u8 proto; -}; - -struct xfrm_aevent_id { - struct xfrm_usersa_id sa_id; - xfrm_address_t saddr; - __u32 flags; - __u32 reqid; -}; - -struct xfrm_userspi_info { - struct xfrm_usersa_info info; - __u32 min; - __u32 max; -}; - -struct xfrm_userpolicy_info { - struct xfrm_selector sel; - struct xfrm_lifetime_cfg lft; - struct xfrm_lifetime_cur curlft; - __u32 priority; - __u32 index; - __u8 dir; - __u8 action; -#define XFRM_POLICY_ALLOW 0 -#define XFRM_POLICY_BLOCK 1 - __u8 flags; -#define XFRM_POLICY_LOCALOK 1 /* Allow user to override global policy */ - /* Automatically expand selector to include matching ICMP payloads. */ -#define XFRM_POLICY_ICMP 2 - __u8 share; -}; - -struct xfrm_userpolicy_id { - struct xfrm_selector sel; - __u32 index; - __u8 dir; -}; - -struct xfrm_user_acquire { - struct xfrm_id id; - xfrm_address_t saddr; - struct xfrm_selector sel; - struct xfrm_userpolicy_info policy; - __u32 aalgos; - __u32 ealgos; - __u32 calgos; - __u32 seq; -}; - -struct xfrm_user_expire { - struct xfrm_usersa_info state; - __u8 hard; -}; - -struct xfrm_user_polexpire { - struct xfrm_userpolicy_info pol; - __u8 hard; -}; - -struct xfrm_usersa_flush { - __u8 proto; -}; - -struct xfrm_user_report { - __u8 proto; - struct xfrm_selector sel; -}; - -/* Used by MIGRATE to pass addresses IKE should use to perform - * SA negotiation with the peer */ -struct xfrm_user_kmaddress { - xfrm_address_t local; - xfrm_address_t remote; - __u32 reserved; - __u16 family; -}; - -struct xfrm_user_migrate { - xfrm_address_t old_daddr; - xfrm_address_t old_saddr; - xfrm_address_t new_daddr; - xfrm_address_t new_saddr; - __u8 proto; - __u8 mode; - __u16 reserved; - __u32 reqid; - __u16 old_family; - __u16 new_family; -}; - -struct xfrm_user_mapping { - struct xfrm_usersa_id id; - __u32 reqid; - xfrm_address_t old_saddr; - xfrm_address_t new_saddr; - __be16 old_sport; - __be16 new_sport; -}; - -#ifndef __KERNEL__ -/* backwards compatibility for userspace */ -#define XFRMGRP_ACQUIRE 1 -#define XFRMGRP_EXPIRE 2 -#define XFRMGRP_SA 4 -#define XFRMGRP_POLICY 8 -#define XFRMGRP_REPORT 0x20 -#endif - -enum xfrm_nlgroups { - XFRMNLGRP_NONE, -#define XFRMNLGRP_NONE XFRMNLGRP_NONE - XFRMNLGRP_ACQUIRE, -#define XFRMNLGRP_ACQUIRE XFRMNLGRP_ACQUIRE - XFRMNLGRP_EXPIRE, -#define XFRMNLGRP_EXPIRE XFRMNLGRP_EXPIRE - XFRMNLGRP_SA, -#define XFRMNLGRP_SA XFRMNLGRP_SA - XFRMNLGRP_POLICY, -#define XFRMNLGRP_POLICY XFRMNLGRP_POLICY - XFRMNLGRP_AEVENTS, -#define XFRMNLGRP_AEVENTS XFRMNLGRP_AEVENTS - XFRMNLGRP_REPORT, -#define XFRMNLGRP_REPORT XFRMNLGRP_REPORT - XFRMNLGRP_MIGRATE, -#define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE - XFRMNLGRP_MAPPING, -#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING - __XFRMNLGRP_MAX -}; -#define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1) - -#endif /* _LINUX_XFRM_H */ -- cgit v1.2.3-59-g8ed1b