From 2740f0cf8ec8bc7ee6a58f68841759e367dda98f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 3 Sep 2014 15:24:58 +0300 Subject: cfg80211: add Intel Mobile Communications copyright Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 8018c915ee63..77d4f26e0235 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -6,6 +6,7 @@ * Copyright (c) 2002-2003, Jouni Malinen * Copyright (c) 2005, Devicescape Software, Inc. * Copyright (c) 2006, Michael Wu + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v1.2.3-59-g8ed1b From c8d6591752e96c550cb98b781326d72d8eedcc79 Mon Sep 17 00:00:00 2001 From: "Steinar H. Gunderson" Date: Wed, 3 Sep 2014 06:48:37 -0700 Subject: mac80211: support DTPC IE (from Cisco Client eXtensions) Linux already supports 802.11h, where the access point can tell the client to reduce its transmission power. However, 802.11h is only defined for 5 GHz, where the need for this is much smaller than on 2.4 GHz. Cisco has their own solution, called DTPC (Dynamic Transmit Power Control). Cisco APs on a controller sometimes but not always send 802.11h; they always send DTPC, even on 2.4 GHz. This patch adds support for parsing and honoring the DTPC IE in addition to the 802.11h element (they do not always contain the same limits, so both must be honored); the format is not documented, but very simple. Tested (on top of wireless.git and on 3.16.1) against a Cisco Aironet 1142 joined to a Cisco 2504 WLC, by setting various transmit power levels for the given access points and observing the results. The Wireshark 802.11 dissector agrees with the interpretation of the element, except for negative numbers, which seem to never happen anyway. Signed-off-by: Steinar H. Gunderson Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 3 ++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 60 +++++++++++++++++++++++++++++++++++++--------- net/mac80211/util.c | 25 +++++++++++++++++++ 4 files changed, 77 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 77d4f26e0235..61a09f0644aa 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1824,7 +1824,8 @@ enum ieee80211_eid { WLAN_EID_DMG_TSPEC = 146, WLAN_EID_DMG_AT = 147, WLAN_EID_DMG_CAP = 148, - /* 149-150 reserved for Cisco */ + /* 149 reserved for Cisco */ + WLAN_EID_CISCO_VENDOR_SPECIFIC = 150, WLAN_EID_DMG_OPERATION = 151, WLAN_EID_DMG_BSS_PARAM_CHANGE = 152, WLAN_EID_DMG_BEAM_REFINEMENT = 153, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6b7bdd8fae29..c2aaec4dfcf0 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1369,6 +1369,7 @@ struct ieee802_11_elems { const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; const u8 *country_elem; const u8 *pwr_constr_elem; + const u8 *cisco_dtpc_elem; const struct ieee80211_timeout_interval_ie *timeout_int; const u8 *opmode_notif; const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0b812a88f95f..a7b92f5f7161 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1230,14 +1230,30 @@ ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, return have_chan_pwr; } +static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, + const u8 *cisco_dtpc_ie, + int *pwr_level) +{ + /* From practical testing, the first data byte of the DTPC element + * seems to contain the requested dBm level, and the CLI on Cisco + * APs clearly state the range is -127 to 127 dBm, which indicates + * a signed byte, although it seemingly never actually goes negative. + * The other byte seems to always be zero. + */ + *pwr_level = (__s8)cisco_dtpc_ie[4]; +} + static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, struct ieee80211_mgmt *mgmt, const u8 *country_ie, u8 country_ie_len, - const u8 *pwr_constr_ie) + const u8 *pwr_constr_ie, + const u8 *cisco_dtpc_ie) { - bool has_80211h_pwr = false; - int chan_pwr, pwr_reduction_80211h; + bool has_80211h_pwr = false, has_cisco_pwr = false; + int chan_pwr = 0, pwr_reduction_80211h = 0; + int pwr_level_cisco, pwr_level_80211h; int new_ap_level; if (country_ie && pwr_constr_ie && @@ -1246,16 +1262,35 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, has_80211h_pwr = ieee80211_find_80211h_pwr_constr( sdata, channel, country_ie, country_ie_len, pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); - new_ap_level = max_t(int, 0, chan_pwr - pwr_reduction_80211h); + pwr_level_80211h = + max_t(int, 0, chan_pwr - pwr_reduction_80211h); + } + + if (cisco_dtpc_ie) { + ieee80211_find_cisco_dtpc( + sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); + has_cisco_pwr = true; } - if (!has_80211h_pwr) + if (!has_80211h_pwr && !has_cisco_pwr) return 0; - sdata_info(sdata, - "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", - new_ap_level, chan_pwr, pwr_reduction_80211h, - sdata->u.mgd.bssid); + /* If we have both 802.11h and Cisco DTPC, apply both limits + * by picking the smallest of the two power levels advertised. + */ + if (has_80211h_pwr && + (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { + sdata_info(sdata, + "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", + pwr_level_80211h, chan_pwr, pwr_reduction_80211h, + sdata->u.mgd.bssid); + new_ap_level = pwr_level_80211h; + } else { /* has_cisco_pwr is always true here. */ + sdata_info(sdata, + "Limiting TX power to %d dBm as advertised by %pM\n", + pwr_level_cisco, sdata->u.mgd.bssid); + new_ap_level = pwr_level_cisco; + } if (sdata->ap_power_level == new_ap_level) return 0; @@ -2923,7 +2958,9 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, /* * This is the canonical list of information elements we care about, * the filter code also gives us all changes to the Microsoft OUI - * (00:50:F2) vendor IE which is used for WMM which we need to track. + * (00:50:F2) vendor IE which is used for WMM which we need to track, + * as well as the DTPC IE (part of the Cisco OUI) used for signaling + * changes to requested client power. * * We implement beacon filtering in software since that means we can * avoid processing the frame here and in cfg80211, and userspace @@ -3232,7 +3269,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, elems.country_elem, elems.country_elem_len, - elems.pwr_constr_elem); + elems.pwr_constr_elem, + elems.cisco_dtpc_elem); ieee80211_bss_info_change_notify(sdata, changed); } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index b444f27a788e..3c61060a4d2b 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1015,6 +1015,31 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, } elems->pwr_constr_elem = pos; break; + case WLAN_EID_CISCO_VENDOR_SPECIFIC: + /* Lots of different options exist, but we only care + * about the Dynamic Transmit Power Control element. + * First check for the Cisco OUI, then for the DTPC + * tag (0x00). + */ + if (elen < 4) { + elem_parse_failed = true; + break; + } + + if (pos[0] != 0x00 || pos[1] != 0x40 || + pos[2] != 0x96 || pos[3] != 0x00) + break; + + if (elen != 6) { + elem_parse_failed = true; + break; + } + + if (calc_crc) + crc = crc32_be(crc, pos - 2, elen + 2); + + elems->cisco_dtpc_elem = pos; + break; case WLAN_EID_TIMEOUT_INTERVAL: if (elen >= sizeof(struct ieee80211_timeout_interval_ie)) elems->timeout_int = (void *)pos; -- cgit v1.2.3-59-g8ed1b From 960d01acf62747d6518694f92be5b06f67473833 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 9 Sep 2014 22:55:35 +0300 Subject: cfg80211: add WMM traffic stream API Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 4 ++ include/net/cfg80211.h | 23 ++++++++- include/uapi/linux/nl80211.h | 28 +++++++++++ net/wireless/nl80211.c | 109 +++++++++++++++++++++++++++++++++++++++++++ net/wireless/rdev-ops.h | 31 ++++++++++++ net/wireless/trace.h | 45 ++++++++++++++++++ 6 files changed, 239 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 61a09f0644aa..b1be39c76931 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -166,8 +166,12 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_FIRST_TSPEC_TSID 8 #define IEEE80211_NUM_TIDS 16 +/* number of user priorities 802.11 uses */ +#define IEEE80211_NUM_UPS 8 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c2c710c14a50..a13beab123dc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2318,6 +2318,17 @@ struct cfg80211_qos_map { * @set_ap_chanwidth: Set the AP (including P2P GO) mode channel width for the * given interface This is used e.g. for dynamic HT 20/40 MHz channel width * changes during the lifetime of the BSS. + * + * @add_tx_ts: validate (if admitted_time is 0) or add a TX TS to the device + * with the given parameters; action frame exchange has been handled by + * userspace so this just has to modify the TX path to take the TS into + * account. + * If the admitted time is 0 just validate the parameters to make sure + * the session can be created at all; it is valid to just always return + * success for that but that may result in inefficient behaviour (handshake + * with the peer followed by immediate teardown when the addition is later + * rejected) + * @del_tx_ts: remove an existing TX TS */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2558,6 +2569,12 @@ struct cfg80211_ops { int (*set_ap_chanwidth)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_chan_def *chandef); + + int (*add_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer, u8 user_prio, + u16 admitted_time); + int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, + u8 tsid, const u8 *peer); }; /* @@ -2604,9 +2621,13 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). + * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM + * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS + * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it + * needs to be able to handle Block-Ack agreements and other things. */ enum wiphy_flags { - /* use hole at 0 */ + WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0), /* use hole at 1 */ /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 29c4399e08b9..e5b8caf5e466 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -722,6 +722,22 @@ * QoS mapping is relevant for IP packets, it is only valid during an * association. This is cleared on disassociation and AP restart. * + * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given + * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO + * and %NL80211_ATTR_ADMITTED_TIME parameters. + * Note that the action frame handshake with the AP shall be handled by + * userspace via the normal management RX/TX framework, this only sets + * up the TX TS in the driver/device. + * If the admitted time attribute is not added then the request just checks + * if a subsequent setup could be successful, the intent is to use this to + * avoid setting up a session with the AP when local restrictions would + * make that impossible. However, the subsequent "real" setup may still + * fail even if the check was successful. + * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID + * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -893,6 +909,9 @@ enum nl80211_commands { NL80211_CMD_SET_QOS_MAP, + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1611,6 +1630,11 @@ enum nl80211_commands { * drivers to indicate dynack capability. Dynack is automatically disabled * setting valid value for coverage class. * + * @NL80211_ATTR_TSID: a TSID value (u8 attribute) + * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) + * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds + * (per second) (u16 attribute) + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1957,6 +1981,10 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_DYN_ACK, + NL80211_ATTR_TSID, + NL80211_ATTR_USER_PRIO, + NL80211_ATTR_ADMITTED_TIME, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index e9fbd4f4ddb0..ab7ee4893e40 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -391,6 +391,9 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_IFACE_SOCKET_OWNER] = { .type = NLA_FLAG }, [NL80211_ATTR_CSA_C_OFFSETS_TX] = { .type = NLA_BINARY }, [NL80211_ATTR_USE_RRM] = { .type = NLA_FLAG }, + [NL80211_ATTR_TSID] = { .type = NLA_U8 }, + [NL80211_ATTR_USER_PRIO] = { .type = NLA_U8 }, + [NL80211_ATTR_ADMITTED_TIME] = { .type = NLA_U16 }, }; /* policy for the key attributes */ @@ -1510,6 +1513,9 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH) CMD(channel_switch, CHANNEL_SWITCH); CMD(set_qos_map, SET_QOS_MAP); + if (rdev->wiphy.flags & + WIPHY_FLAG_SUPPORTS_WMM_ADMISSION) + CMD(add_tx_ts, ADD_TX_TS); } /* add into the if now */ #undef CMD @@ -9390,6 +9396,93 @@ static int nl80211_set_qos_map(struct sk_buff *skb, return ret; } +static int nl80211_add_tx_ts(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + const u8 *peer; + u8 tsid, up; + u16 admitted_time = 0; + int err; + + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_WMM_ADMISSION)) + return -EOPNOTSUPP; + + if (!info->attrs[NL80211_ATTR_TSID] || !info->attrs[NL80211_ATTR_MAC] || + !info->attrs[NL80211_ATTR_USER_PRIO]) + return -EINVAL; + + tsid = nla_get_u8(info->attrs[NL80211_ATTR_TSID]); + if (tsid >= IEEE80211_NUM_TIDS) + return -EINVAL; + + up = nla_get_u8(info->attrs[NL80211_ATTR_USER_PRIO]); + if (up >= IEEE80211_NUM_UPS) + return -EINVAL; + + /* WMM uses TIDs 0-7 even for TSPEC */ + if (tsid < IEEE80211_FIRST_TSPEC_TSID) { + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_WMM_ADMISSION)) + return -EINVAL; + } else { + /* TODO: handle 802.11 TSPEC/admission control + * need more attributes for that (e.g. BA session requirement) + */ + return -EINVAL; + } + + peer = nla_data(info->attrs[NL80211_ATTR_MAC]); + + if (info->attrs[NL80211_ATTR_ADMITTED_TIME]) { + admitted_time = + nla_get_u16(info->attrs[NL80211_ATTR_ADMITTED_TIME]); + if (!admitted_time) + return -EINVAL; + } + + wdev_lock(wdev); + switch (wdev->iftype) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: + if (wdev->current_bss) + break; + err = -ENOTCONN; + goto out; + default: + err = -EOPNOTSUPP; + goto out; + } + + err = rdev_add_tx_ts(rdev, dev, tsid, peer, up, admitted_time); + + out: + wdev_unlock(wdev); + return err; +} + +static int nl80211_del_tx_ts(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + const u8 *peer; + u8 tsid; + int err; + + if (!info->attrs[NL80211_ATTR_TSID] || !info->attrs[NL80211_ATTR_MAC]) + return -EINVAL; + + tsid = nla_get_u8(info->attrs[NL80211_ATTR_TSID]); + peer = nla_data(info->attrs[NL80211_ATTR_MAC]); + + wdev_lock(wdev); + err = rdev_del_tx_ts(rdev, dev, tsid, peer); + wdev_unlock(wdev); + + return err; +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -10147,6 +10240,22 @@ static const struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_ADD_TX_TS, + .doit = nl80211_add_tx_ts, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, + { + .cmd = NL80211_CMD_DEL_TX_TS, + .doit = nl80211_del_tx_ts, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; /* notification functions */ diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 56c2240c30ce..f6d457d6a558 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -915,4 +915,35 @@ rdev_set_ap_chanwidth(struct cfg80211_registered_device *rdev, return ret; } +static inline int +rdev_add_tx_ts(struct cfg80211_registered_device *rdev, + struct net_device *dev, u8 tsid, const u8 *peer, + u8 user_prio, u16 admitted_time) +{ + int ret = -EOPNOTSUPP; + + trace_rdev_add_tx_ts(&rdev->wiphy, dev, tsid, peer, + user_prio, admitted_time); + if (rdev->ops->add_tx_ts) + ret = rdev->ops->add_tx_ts(&rdev->wiphy, dev, tsid, peer, + user_prio, admitted_time); + trace_rdev_return_int(&rdev->wiphy, ret); + + return ret; +} + +static inline int +rdev_del_tx_ts(struct cfg80211_registered_device *rdev, + struct net_device *dev, u8 tsid, const u8 *peer) +{ + int ret = -EOPNOTSUPP; + + trace_rdev_del_tx_ts(&rdev->wiphy, dev, tsid, peer); + if (rdev->ops->del_tx_ts) + ret = rdev->ops->del_tx_ts(&rdev->wiphy, dev, tsid, peer); + trace_rdev_return_int(&rdev->wiphy, ret); + + return ret; +} + #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 0c524cd76c83..625a6e6d1168 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1896,6 +1896,51 @@ TRACE_EVENT(rdev_set_ap_chanwidth, WIPHY_PR_ARG, NETDEV_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(rdev_add_tx_ts, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + u8 tsid, const u8 *peer, u8 user_prio, u16 admitted_time), + TP_ARGS(wiphy, netdev, tsid, peer, user_prio, admitted_time), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(peer) + __field(u8, tsid) + __field(u8, user_prio) + __field(u16, admitted_time) + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(peer, peer); + __entry->tsid = tsid; + __entry->user_prio = user_prio; + __entry->admitted_time = admitted_time; + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT ", TSID %d, UP %d, time %d", + WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer), + __entry->tsid, __entry->user_prio, __entry->admitted_time) +); + +TRACE_EVENT(rdev_del_tx_ts, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + u8 tsid, const u8 *peer), + TP_ARGS(wiphy, netdev, tsid, peer), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + MAC_ENTRY(peer) + __field(u8, tsid) + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + MAC_ASSIGN(peer, peer); + __entry->tsid = tsid; + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " MAC_PR_FMT ", TSID %d", + WIPHY_PR_ARG, NETDEV_PR_ARG, MAC_PR_ARG(peer), __entry->tsid) +); + /************************************************************* * cfg80211 exported functions traces * *************************************************************/ -- cgit v1.2.3-59-g8ed1b