From dff08caf35ecef4f7647f8b1e40877a254852a2b Mon Sep 17 00:00:00 2001 From: Pi-Hsun Shih Date: Fri, 12 Jun 2020 12:05:19 +0800 Subject: platform/chrome: cros_ec: Add command for regulator control. Add host commands for voltage regulator control through ChromeOS EC. Signed-off-by: Pi-Hsun Shih Reviewed-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200612040526.192878-3-pihsun@chromium.org Signed-off-by: Mark Brown --- include/linux/platform_data/cros_ec_commands.h | 82 ++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 69210881ebac..a417b51b5764 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -5430,6 +5430,88 @@ struct ec_response_rollback_info { /* Issue AP reset */ #define EC_CMD_AP_RESET 0x0125 +/*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012B + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align1; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012C + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012D + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012E + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x012F + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ -- cgit v1.3-14-g43fede From da6690767cbd344998f36081815c85f3d467e78c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 25 Jun 2020 17:36:05 +0100 Subject: regulator: consumer: Supply missing prototypes for 3 core functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit regulator_suspend_enable(), regulator_suspend_disable() and regulator_set_suspend_voltage() are all exported members of the API, but are all missing prototypes. Fixes the following W=1 warning(s): drivers/regulator/core.c:3805:5: warning: no previous prototype for ‘regulator_suspend_enable’ [-Wmissing-prototypes] 3805 | int regulator_suspend_enable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3812:5: warning: no previous prototype for ‘regulator_suspend_disable’ [-Wmissing-prototypes] 3812 | int regulator_suspend_disable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3851:5: warning: no previous prototype for ‘regulator_set_suspend_voltage’ [-Wmissing-prototypes] 3851 | int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20200625163614.4001403-2-lee.jones@linaro.org Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 6a92fd3105a3..2024944fd2f7 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -32,10 +32,12 @@ #define __LINUX_REGULATOR_CONSUMER_H_ #include +#include struct device; struct notifier_block; struct regmap; +struct regulator_dev; /* * Regulator operating modes. @@ -277,6 +279,14 @@ int regulator_unregister_notifier(struct regulator *regulator, void devm_regulator_unregister_notifier(struct regulator *regulator, struct notifier_block *nb); +/* regulator suspend */ +int regulator_suspend_enable(struct regulator_dev *rdev, + suspend_state_t state); +int regulator_suspend_disable(struct regulator_dev *rdev, + suspend_state_t state); +int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, + int max_uV, suspend_state_t state); + /* driver data - core doesn't touch */ void *regulator_get_drvdata(struct regulator *regulator); void regulator_set_drvdata(struct regulator *regulator, void *data); -- cgit v1.3-14-g43fede From 0935ff5f1f0a44f66a13e075ed49f97ad99d2fdc Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Sat, 4 Jul 2020 00:19:35 +0800 Subject: regulator: pca9450: add pca9450 pmic driver Add NXP pca9450 pmic driver. Signed-off-by: Robin Gong Reviewed-by: Frieder Schrempf Link: https://lore.kernel.org/r/1593793178-9737-2-git-send-email-yibin.gong@nxp.com Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/pca9450-regulator.c | 843 ++++++++++++++++++++++++++++++++++ include/linux/regulator/pca9450.h | 219 +++++++++ 4 files changed, 1071 insertions(+) create mode 100644 drivers/regulator/pca9450-regulator.c create mode 100644 include/linux/regulator/pca9450.h (limited to 'include/linux') diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 2c6a8c4bdf06..8f9bef574af2 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -750,6 +750,14 @@ config REGULATOR_PBIAS This driver provides support for OMAP pbias modelled regulators. +config REGULATOR_PCA9450 + tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver" + depends on I2C + select REGMAP_I2C + help + Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC + regulator driver. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85bc3ef0be1c..6adfe769a47c 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -96,6 +96,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o +obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c new file mode 100644 index 000000000000..02250459aa90 --- /dev/null +++ b/drivers/regulator/pca9450-regulator.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 NXP. + * NXP PCA9450 pmic driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct pc9450_dvs_config { + unsigned int run_reg; /* dvs0 */ + unsigned int run_mask; + unsigned int standby_reg; /* dvs1 */ + unsigned int standby_mask; +}; + +struct pca9450_regulator_desc { + struct regulator_desc desc; + const struct pc9450_dvs_config dvs; +}; + +struct pca9450 { + struct device *dev; + struct regmap *regmap; + enum pca9450_chip_type type; + unsigned int rcnt; + int irq; +}; + +static const struct regmap_range pca9450_status_range = { + .range_min = PCA9450_REG_INT1, + .range_max = PCA9450_REG_PWRON_STAT, +}; + +static const struct regmap_access_table pca9450_volatile_regs = { + .yes_ranges = &pca9450_status_range, + .n_yes_ranges = 1, +}; + +static const struct regmap_config pca9450_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &pca9450_volatile_regs, + .max_register = PCA9450_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, +}; + +/* + * BUCK1/2/3 + * BUCK1RAM[1:0] BUCK1 DVS ramp rate setting + * 00: 25mV/1usec + * 01: 25mV/2usec + * 10: 25mV/4usec + * 11: 25mV/8usec + */ +static int pca9450_dvs_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + int id = rdev_get_id(rdev); + unsigned int ramp_value; + + switch (ramp_delay) { + case 1 ... 3125: + ramp_value = BUCK1_RAMP_3P125MV; + break; + case 3126 ... 6250: + ramp_value = BUCK1_RAMP_6P25MV; + break; + case 6251 ... 12500: + ramp_value = BUCK1_RAMP_12P5MV; + break; + case 12501 ... 25000: + ramp_value = BUCK1_RAMP_25MV; + break; + default: + ramp_value = BUCK1_RAMP_25MV; + } + + return regmap_update_bits(rdev->regmap, PCA9450_REG_BUCK1CTRL + id * 3, + BUCK1_RAMP_MASK, ramp_value << 6); +} + +static struct regulator_ops pca9450_dvs_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pca9450_dvs_set_ramp_delay, +}; + +static struct regulator_ops pca9450_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static struct regulator_ops pca9450_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +/* + * BUCK1/2/3 + * 0.60 to 2.1875V (12.5mV step) + */ +static const struct linear_range pca9450_dvs_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), +}; + +/* + * BUCK4/5/6 + * 0.6V to 3.4V (25mV step) + */ +static const struct linear_range pca9450_buck_volts[] = { + REGULATOR_LINEAR_RANGE(600000, 0x00, 0x70, 25000), + REGULATOR_LINEAR_RANGE(3400000, 0x71, 0x7F, 0), +}; + +/* + * LDO1 + * 1.6 to 3.3V () + */ +static const struct linear_range pca9450_ldo1_volts[] = { + REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000), + REGULATOR_LINEAR_RANGE(3000000, 0x04, 0x07, 100000), +}; + +/* + * LDO2 + * 0.8 to 1.15V (50mV step) + */ +static const struct linear_range pca9450_ldo2_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x07, 50000), +}; + +/* + * LDO3/4 + * 0.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo34_volts[] = { + REGULATOR_LINEAR_RANGE(800000, 0x00, 0x19, 100000), + REGULATOR_LINEAR_RANGE(3300000, 0x1A, 0x1F, 0), +}; + +/* + * LDO5 + * 1.8 to 3.3V (100mV step) + */ +static const struct linear_range pca9450_ldo5_volts[] = { + REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), +}; + +static int buck_set_dvs(const struct regulator_desc *desc, + struct device_node *np, struct regmap *regmap, + char *prop, unsigned int reg, unsigned int mask) +{ + int ret, i; + uint32_t uv; + + ret = of_property_read_u32(np, prop, &uv); + if (ret == -EINVAL) + return 0; + else if (ret) + return ret; + + for (i = 0; i < desc->n_voltages; i++) { + ret = regulator_desc_list_voltage_linear_range(desc, i); + if (ret < 0) + continue; + if (ret == uv) { + i <<= ffs(desc->vsel_mask) - 1; + ret = regmap_update_bits(regmap, reg, mask, i); + break; + } + } + + return ret; +} + +static int pca9450_set_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct pca9450_regulator_desc *data = container_of(desc, + struct pca9450_regulator_desc, desc); + const struct pc9450_dvs_config *dvs = &data->dvs; + unsigned int reg, mask; + char *prop; + int i, ret = 0; + + for (i = 0; i < PCA9450_DVS_LEVEL_MAX; i++) { + switch (i) { + case PCA9450_DVS_LEVEL_RUN: + prop = "nxp,dvs-run-voltage"; + reg = dvs->run_reg; + mask = dvs->run_mask; + break; + case PCA9450_DVS_LEVEL_STANDBY: + prop = "nxp,dvs-standby-voltage"; + reg = dvs->standby_reg; + mask = dvs->standby_mask; + break; + default: + return -EINVAL; + } + + ret = buck_set_dvs(desc, np, cfg->regmap, prop, reg, mask); + if (ret) + break; + } + + return ret; +} + +static const struct pca9450_regulator_desc pca9450a_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK3, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK3_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK3OUT_DVS0, + .vsel_mask = BUCK3OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK3CTRL, + .enable_mask = BUCK3_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK3OUT_DVS0, + .run_mask = BUCK3OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK3OUT_DVS1, + .standby_mask = BUCK3OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +/* + * Buck3 removed on PCA9450B and connected with Buck1 internal for dual phase + * on PCA9450C as no Buck3. + */ +static const struct pca9450_regulator_desc pca9450bc_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK1, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0, + .vsel_mask = BUCK1OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK1CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK1OUT_DVS0, + .run_mask = BUCK1OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK1OUT_DVS1, + .standby_mask = BUCK1OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK2, + .ops = &pca9450_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM, + .linear_ranges = pca9450_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts), + .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0, + .vsel_mask = BUCK2OUT_DVS0_MASK, + .enable_reg = PCA9450_REG_BUCK2CTRL, + .enable_mask = BUCK1_ENMODE_MASK, + .owner = THIS_MODULE, + .of_parse_cb = pca9450_set_dvs_levels, + }, + .dvs = { + .run_reg = PCA9450_REG_BUCK2OUT_DVS0, + .run_mask = BUCK2OUT_DVS0_MASK, + .standby_reg = PCA9450_REG_BUCK2OUT_DVS1, + .standby_mask = BUCK2OUT_DVS1_MASK, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK4, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK4OUT, + .vsel_mask = BUCK4OUT_MASK, + .enable_reg = PCA9450_REG_BUCK4CTRL, + .enable_mask = BUCK4_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK5, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK5OUT, + .vsel_mask = BUCK5OUT_MASK, + .enable_reg = PCA9450_REG_BUCK5CTRL, + .enable_mask = BUCK5_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_BUCK6, + .ops = &pca9450_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM, + .linear_ranges = pca9450_buck_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts), + .vsel_reg = PCA9450_REG_BUCK6OUT, + .vsel_mask = BUCK6OUT_MASK, + .enable_reg = PCA9450_REG_BUCK6CTRL, + .enable_mask = BUCK6_ENMODE_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO1, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO1_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts), + .vsel_reg = PCA9450_REG_LDO1CTRL, + .vsel_mask = LDO1OUT_MASK, + .enable_reg = PCA9450_REG_LDO1CTRL, + .enable_mask = LDO1_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO2, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO2_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo2_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo2_volts), + .vsel_reg = PCA9450_REG_LDO2CTRL, + .vsel_mask = LDO2OUT_MASK, + .enable_reg = PCA9450_REG_LDO2CTRL, + .enable_mask = LDO2_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO3, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO3_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO3CTRL, + .vsel_mask = LDO3OUT_MASK, + .enable_reg = PCA9450_REG_LDO3CTRL, + .enable_mask = LDO3_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO4, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO4_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo34_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts), + .vsel_reg = PCA9450_REG_LDO4CTRL, + .vsel_mask = LDO4OUT_MASK, + .enable_reg = PCA9450_REG_LDO4CTRL, + .enable_mask = LDO4_EN_MASK, + .owner = THIS_MODULE, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = PCA9450_LDO5, + .ops = &pca9450_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = PCA9450_LDO5_VOLTAGE_NUM, + .linear_ranges = pca9450_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts), + .vsel_reg = PCA9450_REG_LDO5CTRL_H, + .vsel_mask = LDO5HOUT_MASK, + .enable_reg = PCA9450_REG_LDO5CTRL_H, + .enable_mask = LDO5H_EN_MASK, + .owner = THIS_MODULE, + }, + }, +}; + +static irqreturn_t pca9450_irq_handler(int irq, void *data) +{ + struct pca9450 *pca9450 = data; + struct regmap *regmap = pca9450->regmap; + unsigned int status; + int ret; + + ret = regmap_read(regmap, PCA9450_REG_INT1, &status); + if (ret < 0) { + dev_err(pca9450->dev, + "Failed to read INT1(%d)\n", ret); + return IRQ_NONE; + } + + if (status & IRQ_PWRON) + dev_warn(pca9450->dev, "PWRON interrupt.\n"); + + if (status & IRQ_WDOGB) + dev_warn(pca9450->dev, "WDOGB interrupt.\n"); + + if (status & IRQ_VR_FLT1) + dev_warn(pca9450->dev, "VRFLT1 interrupt.\n"); + + if (status & IRQ_VR_FLT2) + dev_warn(pca9450->dev, "VRFLT2 interrupt.\n"); + + if (status & IRQ_LOWVSYS) + dev_warn(pca9450->dev, "LOWVSYS interrupt.\n"); + + if (status & IRQ_THERM_105) + dev_warn(pca9450->dev, "IRQ_THERM_105 interrupt.\n"); + + if (status & IRQ_THERM_125) + dev_warn(pca9450->dev, "IRQ_THERM_125 interrupt.\n"); + + return IRQ_HANDLED; +} + +static int pca9450_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + enum pca9450_chip_type type = (unsigned int)(uintptr_t) + of_device_get_match_data(&i2c->dev); + const struct pca9450_regulator_desc *regulator_desc; + struct regulator_config config = { }; + struct pca9450 *pca9450; + unsigned int device_id, i; + int ret; + + if (!i2c->irq) { + dev_err(&i2c->dev, "No IRQ configured?\n"); + return -EINVAL; + } + + pca9450 = devm_kzalloc(&i2c->dev, sizeof(struct pca9450), GFP_KERNEL); + if (!pca9450) + return -ENOMEM; + + switch (type) { + case PCA9450_TYPE_PCA9450A: + regulator_desc = pca9450a_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450a_regulators); + break; + case PCA9450_TYPE_PCA9450BC: + regulator_desc = pca9450bc_regulators; + pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators); + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } + + pca9450->irq = i2c->irq; + pca9450->type = type; + pca9450->dev = &i2c->dev; + + dev_set_drvdata(&i2c->dev, pca9450); + + pca9450->regmap = devm_regmap_init_i2c(i2c, + &pca9450_regmap_config); + if (IS_ERR(pca9450->regmap)) { + dev_err(&i2c->dev, "regmap initialization failed\n"); + return PTR_ERR(pca9450->regmap); + } + + ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID, &device_id); + if (ret) { + dev_err(&i2c->dev, "Read device id error\n"); + return ret; + } + + /* Check your board and dts for match the right pmic */ + if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) || + ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) { + dev_err(&i2c->dev, "Device id(%x) mismatched\n", + device_id >> 4); + return -EINVAL; + } + + for (i = 0; i < pca9450->rcnt; i++) { + const struct regulator_desc *desc; + struct regulator_dev *rdev; + const struct pca9450_regulator_desc *r; + + r = ®ulator_desc[i]; + desc = &r->desc; + + config.regmap = pca9450->regmap; + config.dev = pca9450->dev; + + rdev = devm_regulator_register(pca9450->dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(pca9450->dev, + "Failed to register regulator(%s): %d\n", + desc->name, ret); + return ret; + } + } + + ret = devm_request_threaded_irq(pca9450->dev, pca9450->irq, NULL, + pca9450_irq_handler, + (IRQF_TRIGGER_FALLING | IRQF_ONESHOT), + "pca9450-irq", pca9450); + if (ret != 0) { + dev_err(pca9450->dev, "Failed to request IRQ: %d\n", + pca9450->irq); + return ret; + } + /* Unmask all interrupt except PWRON/WDOG/RSVD */ + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_INT1_MSK, + IRQ_VR_FLT1 | IRQ_VR_FLT2 | IRQ_LOWVSYS | + IRQ_THERM_105 | IRQ_THERM_125, + IRQ_PWRON | IRQ_WDOGB | IRQ_RSVD); + if (ret) { + dev_err(&i2c->dev, "Unmask irq error\n"); + return ret; + } + + dev_info(&i2c->dev, "%s probed.\n", + type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); + + return 0; +} + +static const struct of_device_id pca9450_of_match[] = { + { + .compatible = "nxp,pca9450a", + .data = (void *)PCA9450_TYPE_PCA9450A, + }, + { + .compatible = "nxp,pca9450b", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { + .compatible = "nxp,pca9450c", + .data = (void *)PCA9450_TYPE_PCA9450BC, + }, + { } +}; +MODULE_DEVICE_TABLE(of, pca9450_of_match); + +static struct i2c_driver pca9450_i2c_driver = { + .driver = { + .name = "nxp-pca9450", + .of_match_table = pca9450_of_match, + }, + .probe = pca9450_i2c_probe, +}; + +static int __init pca9450_i2c_init(void) +{ + return i2c_add_driver(&pca9450_i2c_driver); +} +module_init(pca9450_i2c_init); + +static void __exit pca9450_i2c_exit(void) +{ + i2c_del_driver(&pca9450_i2c_driver); +} +module_exit(pca9450_i2c_exit); + +MODULE_AUTHOR("Robin Gong "); +MODULE_DESCRIPTION("NXP PCA9450 Power Management IC driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h new file mode 100644 index 000000000000..1bbd3014f906 --- /dev/null +++ b/include/linux/regulator/pca9450.h @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright 2020 NXP. */ + +#ifndef __LINUX_REG_PCA9450_H__ +#define __LINUX_REG_PCA9450_H__ + +#include + +enum pca9450_chip_type { + PCA9450_TYPE_PCA9450A = 0, + PCA9450_TYPE_PCA9450BC, + PCA9450_TYPE_AMOUNT, +}; + +enum { + PCA9450_BUCK1 = 0, + PCA9450_BUCK2, + PCA9450_BUCK3, + PCA9450_BUCK4, + PCA9450_BUCK5, + PCA9450_BUCK6, + PCA9450_LDO1, + PCA9450_LDO2, + PCA9450_LDO3, + PCA9450_LDO4, + PCA9450_LDO5, + PCA9450_REGULATOR_CNT, +}; + +enum { + PCA9450_DVS_LEVEL_RUN = 0, + PCA9450_DVS_LEVEL_STANDBY, + PCA9450_DVS_LEVEL_MAX, +}; + +#define PCA9450_BUCK1_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK2_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK3_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK4_VOLTAGE_NUM 0x80 + +#define PCA9450_BUCK5_VOLTAGE_NUM 0x80 +#define PCA9450_BUCK6_VOLTAGE_NUM 0x80 + +#define PCA9450_LDO1_VOLTAGE_NUM 0x08 +#define PCA9450_LDO2_VOLTAGE_NUM 0x08 +#define PCA9450_LDO3_VOLTAGE_NUM 0x20 +#define PCA9450_LDO4_VOLTAGE_NUM 0x20 +#define PCA9450_LDO5_VOLTAGE_NUM 0x10 + +enum { + PCA9450_REG_DEV_ID = 0x00, + PCA9450_REG_INT1 = 0x01, + PCA9450_REG_INT1_MSK = 0x02, + PCA9450_REG_STATUS1 = 0x03, + PCA9450_REG_STATUS2 = 0x04, + PCA9450_REG_PWRON_STAT = 0x05, + PCA9450_REG_SWRST = 0x06, + PCA9450_REG_PWRCTRL = 0x07, + PCA9450_REG_RESET_CTRL = 0x08, + PCA9450_REG_CONFIG1 = 0x09, + PCA9450_REG_CONFIG2 = 0x0A, + PCA9450_REG_BUCK123_DVS = 0x0C, + PCA9450_REG_BUCK1OUT_LIMIT = 0x0D, + PCA9450_REG_BUCK2OUT_LIMIT = 0x0E, + PCA9450_REG_BUCK3OUT_LIMIT = 0x0F, + PCA9450_REG_BUCK1CTRL = 0x10, + PCA9450_REG_BUCK1OUT_DVS0 = 0x11, + PCA9450_REG_BUCK1OUT_DVS1 = 0x12, + PCA9450_REG_BUCK2CTRL = 0x13, + PCA9450_REG_BUCK2OUT_DVS0 = 0x14, + PCA9450_REG_BUCK2OUT_DVS1 = 0x15, + PCA9450_REG_BUCK3CTRL = 0x16, + PCA9450_REG_BUCK3OUT_DVS0 = 0x17, + PCA9450_REG_BUCK3OUT_DVS1 = 0x18, + PCA9450_REG_BUCK4CTRL = 0x19, + PCA9450_REG_BUCK4OUT = 0x1A, + PCA9450_REG_BUCK5CTRL = 0x1B, + PCA9450_REG_BUCK5OUT = 0x1C, + PCA9450_REG_BUCK6CTRL = 0x1D, + PCA9450_REG_BUCK6OUT = 0x1E, + PCA9450_REG_LDO_AD_CTRL = 0x20, + PCA9450_REG_LDO1CTRL = 0x21, + PCA9450_REG_LDO2CTRL = 0x22, + PCA9450_REG_LDO3CTRL = 0x23, + PCA9450_REG_LDO4CTRL = 0x24, + PCA9450_REG_LDO5CTRL_L = 0x25, + PCA9450_REG_LDO5CTRL_H = 0x26, + PCA9450_REG_LOADSW_CTRL = 0x2A, + PCA9450_REG_VRFLT1_STS = 0x2B, + PCA9450_REG_VRFLT2_STS = 0x2C, + PCA9450_REG_VRFLT1_MASK = 0x2D, + PCA9450_REG_VRFLT2_MASK = 0x2E, + PCA9450_MAX_REGISTER = 0x2F, +}; + +/* PCA9450 BUCK ENMODE bits */ +#define BUCK_ENMODE_OFF 0x00 +#define BUCK_ENMODE_ONREQ 0x01 +#define BUCK_ENMODE_ONREQ_STBYREQ 0x02 +#define BUCK_ENMODE_ON 0x03 + +/* PCA9450_REG_BUCK1_CTRL bits */ +#define BUCK1_RAMP_MASK 0xC0 +#define BUCK1_RAMP_25MV 0x0 +#define BUCK1_RAMP_12P5MV 0x1 +#define BUCK1_RAMP_6P25MV 0x2 +#define BUCK1_RAMP_3P125MV 0x3 +#define BUCK1_DVS_CTRL 0x10 +#define BUCK1_AD 0x08 +#define BUCK1_FPWM 0x04 +#define BUCK1_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK2_CTRL bits */ +#define BUCK2_RAMP_MASK 0xC0 +#define BUCK2_RAMP_25MV 0x0 +#define BUCK2_RAMP_12P5MV 0x1 +#define BUCK2_RAMP_6P25MV 0x2 +#define BUCK2_RAMP_3P125MV 0x3 +#define BUCK2_DVS_CTRL 0x10 +#define BUCK2_AD 0x08 +#define BUCK2_FPWM 0x04 +#define BUCK2_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK3_CTRL bits */ +#define BUCK3_RAMP_MASK 0xC0 +#define BUCK3_RAMP_25MV 0x0 +#define BUCK3_RAMP_12P5MV 0x1 +#define BUCK3_RAMP_6P25MV 0x2 +#define BUCK3_RAMP_3P125MV 0x3 +#define BUCK3_DVS_CTRL 0x10 +#define BUCK3_AD 0x08 +#define BUCK3_FPWM 0x04 +#define BUCK3_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK4_CTRL bits */ +#define BUCK4_AD 0x08 +#define BUCK4_FPWM 0x04 +#define BUCK4_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK5_CTRL bits */ +#define BUCK5_AD 0x08 +#define BUCK5_FPWM 0x04 +#define BUCK5_ENMODE_MASK 0x03 + +/* PCA9450_REG_BUCK6_CTRL bits */ +#define BUCK6_AD 0x08 +#define BUCK6_FPWM 0x04 +#define BUCK6_ENMODE_MASK 0x03 + +/* PCA9450_BUCK1OUT_DVS0 bits */ +#define BUCK1OUT_DVS0_MASK 0x7F +#define BUCK1OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK1OUT_DVS1 bits */ +#define BUCK1OUT_DVS1_MASK 0x7F +#define BUCK1OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS0 bits */ +#define BUCK2OUT_DVS0_MASK 0x7F +#define BUCK2OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK2OUT_DVS1 bits */ +#define BUCK2OUT_DVS1_MASK 0x7F +#define BUCK2OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS0 bits */ +#define BUCK3OUT_DVS0_MASK 0x7F +#define BUCK3OUT_DVS0_DEFAULT 0x14 + +/* PCA9450_BUCK3OUT_DVS1 bits */ +#define BUCK3OUT_DVS1_MASK 0x7F +#define BUCK3OUT_DVS1_DEFAULT 0x14 + +/* PCA9450_REG_BUCK4OUT bits */ +#define BUCK4OUT_MASK 0x7F +#define BUCK4OUT_DEFAULT 0x6C + +/* PCA9450_REG_BUCK5OUT bits */ +#define BUCK5OUT_MASK 0x7F +#define BUCK5OUT_DEFAULT 0x30 + +/* PCA9450_REG_BUCK6OUT bits */ +#define BUCK6OUT_MASK 0x7F +#define BUCK6OUT_DEFAULT 0x14 + +/* PCA9450_REG_LDO1_VOLT bits */ +#define LDO1_EN_MASK 0xC0 +#define LDO1OUT_MASK 0x07 + +/* PCA9450_REG_LDO2_VOLT bits */ +#define LDO2_EN_MASK 0xC0 +#define LDO2OUT_MASK 0x07 + +/* PCA9450_REG_LDO3_VOLT bits */ +#define LDO3_EN_MASK 0xC0 +#define LDO3OUT_MASK 0x0F + +/* PCA9450_REG_LDO4_VOLT bits */ +#define LDO4_EN_MASK 0xC0 +#define LDO4OUT_MASK 0x0F + +/* PCA9450_REG_LDO5_VOLT bits */ +#define LDO5L_EN_MASK 0xC0 +#define LDO5LOUT_MASK 0x0F + +#define LDO5H_EN_MASK 0xC0 +#define LDO5HOUT_MASK 0x0F + +/* PCA9450_REG_IRQ bits */ +#define IRQ_PWRON 0x80 +#define IRQ_WDOGB 0x40 +#define IRQ_RSVD 0x20 +#define IRQ_VR_FLT1 0x10 +#define IRQ_VR_FLT2 0x08 +#define IRQ_LOWVSYS 0x04 +#define IRQ_THERM_105 0x02 +#define IRQ_THERM_125 0x01 + +#endif /* __LINUX_REG_PCA9450_H__ */ -- cgit v1.3-14-g43fede From f7d7ad42a9dc2d63cab6a79fe31e6732a30dacf5 Mon Sep 17 00:00:00 2001 From: Sumit Semwal Date: Mon, 22 Jun 2020 18:11:07 +0530 Subject: regulator: Allow regulators to verify enabled during enable() Some regulators might need to verify that they have indeed been enabled after the enable() call is made and enable_time delay has passed. This is implemented by repeatedly checking is_enabled() upto poll_enabled_time, waiting for the already calculated enable delay in each iteration. Signed-off-by: Sumit Semwal Link: https://lore.kernel.org/r/20200622124110.20971-2-sumit.semwal@linaro.org Signed-off-by: Mark Brown --- drivers/regulator/core.c | 63 +++++++++++++++++++++++++++++++++++++++- include/linux/regulator/driver.h | 5 ++++ 2 files changed, 67 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 03154f5b939f..538a2779986a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2347,6 +2347,37 @@ static void _regulator_enable_delay(unsigned int delay) udelay(us); } +/** + * _regulator_check_status_enabled + * + * A helper function to check if the regulator status can be interpreted + * as 'regulator is enabled'. + * @rdev: the regulator device to check + * + * Return: + * * 1 - if status shows regulator is in enabled state + * * 0 - if not enabled state + * * Error Value - as received from ops->get_status() + */ +static inline int _regulator_check_status_enabled(struct regulator_dev *rdev) +{ + int ret = rdev->desc->ops->get_status(rdev); + + if (ret < 0) { + rdev_info(rdev, "get_status returned error: %d\n", ret); + return ret; + } + + switch (ret) { + case REGULATOR_STATUS_OFF: + case REGULATOR_STATUS_ERROR: + case REGULATOR_STATUS_UNDEFINED: + return 0; + default: + return 1; + } +} + static int _regulator_do_enable(struct regulator_dev *rdev) { int ret, delay; @@ -2407,7 +2438,37 @@ static int _regulator_do_enable(struct regulator_dev *rdev) * together. */ trace_regulator_enable_delay(rdev_get_name(rdev)); - _regulator_enable_delay(delay); + /* If poll_enabled_time is set, poll upto the delay calculated + * above, delaying poll_enabled_time uS to check if the regulator + * actually got enabled. + * If the regulator isn't enabled after enable_delay has + * expired, return -ETIMEDOUT. + */ + if (rdev->desc->poll_enabled_time) { + unsigned int time_remaining = delay; + + while (time_remaining > 0) { + _regulator_enable_delay(rdev->desc->poll_enabled_time); + + if (rdev->desc->ops->get_status) { + ret = _regulator_check_status_enabled(rdev); + if (ret < 0) + return ret; + else if (ret) + break; + } else if (rdev->desc->ops->is_enabled(rdev)) + break; + + time_remaining -= rdev->desc->poll_enabled_time; + } + + if (time_remaining <= 0) { + rdev_err(rdev, "Enabled check timed out\n"); + return -ETIMEDOUT; + } + } else { + _regulator_enable_delay(delay); + } trace_regulator_enable_complete(rdev_get_name(rdev)); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 7eb9fea8e482..436df3ba0b2a 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -305,6 +305,9 @@ enum regulator_type { * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator * + * @poll_enabled_time: The polling interval (in uS) to use while checking that + * the regulator was actually enabled. Max upto enable_time. + * * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode */ struct regulator_desc { @@ -372,6 +375,8 @@ struct regulator_desc { unsigned int off_on_delay; + unsigned int poll_enabled_time; + unsigned int (*of_map_mode)(unsigned int mode); }; -- cgit v1.3-14-g43fede From a98bcaa92d3d7a7753e23b3363d90ffdb82e8edb Mon Sep 17 00:00:00 2001 From: Colton Lewis Date: Wed, 15 Jul 2020 19:15:00 +0000 Subject: regulator: Correct kernel-doc inconsistency Silence documentation build warning by correcting kernel-doc comments. ./include/linux/regulator/machine.h:196: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints' ./include/linux/regulator/driver.h:206: warning: Function parameter or member 'resume' not described in 'regulator_ops' Signed-off-by: Colton Lewis Link: https://lore.kernel.org/r/20200715191438.29312-1-colton.w.lewis@protonmail.com Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 +- include/linux/regulator/machine.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 436df3ba0b2a..8539f34ae42b 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -117,7 +117,7 @@ enum regulator_status { * suspended. * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. - * + * @resume: Resume operation of suspended regulator. * @set_pull_down: Configure the regulator to pull down when the regulator * is disabled. * diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index a84cc8879c3e..8a56f033b6cd 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -101,6 +101,7 @@ struct regulator_state { * @system_load: Load that isn't captured by any consumer requests. * * @max_spread: Max possible spread between coupled regulators + * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. * @valid_ops_mask: Operations which may be performed by consumers. * -- cgit v1.3-14-g43fede From a233547660a3915973d41e2a9a0923d0cf317a62 Mon Sep 17 00:00:00 2001 From: Pi-Hsun Shih Date: Fri, 24 Jul 2020 16:03:55 +0800 Subject: platform/chrome: cros_ec: Fix host command for regulator control. Since the host command number 0x012B conflicts with other EC host command, add one to all regulator control related host command. Also fix a wrong alignment on struct and sync the comment with the one in ChromeOS EC codebase. Fixes: dff08caf35ec ("platform/chrome: cros_ec: Add command for regulator control.") Signed-off-by: Pi-Hsun Shih Acked-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200724080358.619245-1-pihsun@chromium.org Signed-off-by: Mark Brown --- include/linux/platform_data/cros_ec_commands.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index a417b51b5764..91e77f53414d 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -5438,7 +5438,7 @@ struct ec_response_rollback_info { * * Returns the regulator name and supported voltage list in mV. */ -#define EC_CMD_REGULATOR_GET_INFO 0x012B +#define EC_CMD_REGULATOR_GET_INFO 0x012C /* Maximum length of regulator name */ #define EC_REGULATOR_NAME_MAX_LEN 16 @@ -5454,12 +5454,12 @@ struct ec_response_regulator_get_info { char name[EC_REGULATOR_NAME_MAX_LEN]; uint16_t num_voltages; uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; -} __ec_align1; +} __ec_align2; /* * Configure the regulator as enabled / disabled. */ -#define EC_CMD_REGULATOR_ENABLE 0x012C +#define EC_CMD_REGULATOR_ENABLE 0x012D struct ec_params_regulator_enable { uint32_t index; @@ -5471,7 +5471,7 @@ struct ec_params_regulator_enable { * * Returns 1 if the regulator is enabled, 0 if not. */ -#define EC_CMD_REGULATOR_IS_ENABLED 0x012D +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E struct ec_params_regulator_is_enabled { uint32_t index; @@ -5489,7 +5489,7 @@ struct ec_response_regulator_is_enabled { * Also note that this might be called before the regulator is enabled, and the * setting should be in effect after the regulator is enabled. */ -#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012E +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F struct ec_params_regulator_set_voltage { uint32_t index; @@ -5500,9 +5500,10 @@ struct ec_params_regulator_set_voltage { /* * Get the currently configured voltage for the voltage regulator. * - * Note that this might be called before the regulator is enabled. + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. */ -#define EC_CMD_REGULATOR_GET_VOLTAGE 0x012F +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 struct ec_params_regulator_get_voltage { uint32_t index; -- cgit v1.3-14-g43fede