From 9b2777d6089bcd7fb035847f907280560fe233c8 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:08 +0100
Subject: ieee802154: add TX power control to wpan_phy

Replace the current u8 transmit_power in wpan_phy with s8 transmit_power.
The u8 field contained the actual tx power and a tolerance field,
which no physical radio every used. Adjust sysfs entries to keep
compatibility with userspace, give tolerances of +-1dB statically there.

This patch only adds support for this in the at86rf230 driver and the
RF212 chip. Configuration calculation for RF212 is also somewhat basic,
but does the job - the RF212 datasheet gives a large table with
suggested values for combinations of TX power and page/channel, if this
does not work well, we might have to copy the whole table.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/nl802154.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index fd4f2d1cdf6c..625d19e0a1de 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -70,6 +70,8 @@ enum {
 	IEEE802154_ATTR_PHY_NAME,
 	IEEE802154_ATTR_DEV_TYPE,
 
+	IEEE802154_ATTR_TXPOWER,
+
 	__IEEE802154_ATTR_MAX,
 };
 
@@ -122,6 +124,8 @@ enum {
 	IEEE802154_ADD_IFACE,
 	IEEE802154_DEL_IFACE,
 
+	IEEE802154_SET_PHYPARAMS,
+
 	__IEEE802154_CMD_MAX,
 };
 
-- 
cgit v1.3-14-g43fede


From 84dda3c648fd55898064d76366b14f964cdc9d16 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:10 +0100
Subject: ieee802154: add support for listen-before-talk in wpan_phy

Listen-before-talk is an alternative to CSMA in uncoordinated networks
and prescribed by european regulations if one wants to have a device
with radio duty cycles above 10% (or less in some bands). Add a phy
property to enable/disable LBT in the phy, including support in the
at86rf230 driver for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 11 +++++++-
 include/linux/nl802154.h           |  1 +
 include/net/mac802154.h            |  6 ++++
 include/net/wpan-phy.h             |  3 ++
 net/ieee802154/nl-phy.c            | 58 ++++++++++++++++++++++++++++++--------
 net/ieee802154/nl_policy.c         |  1 +
 net/mac802154/ieee802154_dev.c     | 11 ++++++++
 7 files changed, 78 insertions(+), 13 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 04a995dad593..3d40c2350261 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -152,7 +152,7 @@ static inline int is_rf212(struct at86rf230_local *local)
 #define	SR_RESERVED_17_5	0x17, 0x08, 3
 #define	SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
 #define	SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
-#define	SR_RESERVED_17_2	0x17, 0x40, 6
+#define	SR_CSMA_LBT_MODE	0x17, 0x40, 6
 #define	SR_RESERVED_17_1	0x17, 0x80, 7
 #define	RG_FTN_CTRL	(0x18)
 #define	SR_RESERVED_18_2	0x18, 0x7f, 0
@@ -786,6 +786,14 @@ at86rf212_set_txpower(struct ieee802154_dev *dev, int db)
 	return 0;
 }
 
+static int
+at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -805,6 +813,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.stop = at86rf230_stop,
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 	.set_txpower = at86rf212_set_txpower,
+	.set_lbt = at86rf212_set_lbt,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 625d19e0a1de..326baee227f7 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -71,6 +71,7 @@ enum {
 	IEEE802154_ATTR_DEV_TYPE,
 
 	IEEE802154_ATTR_TXPOWER,
+	IEEE802154_ATTR_LBT_ENABLED,
 
 	__IEEE802154_ATTR_MAX,
 };
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 8bd2785a663c..521edcb0e586 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -117,6 +117,11 @@ struct ieee802154_dev {
  * set_txpower:
  *	  Set radio transmit power in dB. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
+ *
+ * set_lbt
+ *	  Enables or disables listen before talk on the device. Called with
+ *	  pib_lock held.
+ *	  Returns either zero, or negative errno.
  */
 struct ieee802154_ops {
 	struct module	*owner;
@@ -134,6 +139,7 @@ struct ieee802154_ops {
 	int		(*ieee_addr)(struct ieee802154_dev *dev,
 				     u8 addr[IEEE802154_ADDR_LEN]);
 	int		(*set_txpower)(struct ieee802154_dev *dev, int db);
+	int		(*set_lbt)(struct ieee802154_dev *dev, bool on);
 };
 
 /* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 47fc0c1bc3c7..804e6c4f5f8a 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -47,6 +47,8 @@ struct wpan_phy {
 	s8 transmit_power;
 	u8 cca_mode;
 
+	bool lbt;
+
 	struct device dev;
 	int idx;
 
@@ -55,6 +57,7 @@ struct wpan_phy {
 	void (*del_iface)(struct wpan_phy *phy, struct net_device *dev);
 
 	int (*set_txpower)(struct wpan_phy *phy, int db);
+	int (*set_lbt)(struct wpan_phy *phy, bool on);
 
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index d3ee62fbae99..f029310b0662 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -56,7 +56,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
 	if (nla_put_string(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy)) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
-	    nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power))
+	    nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
+	    nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt))
 		goto nla_put_failure;
 	for (i = 0; i < 32; i++) {
 		if (phy->channels_supported[i])
@@ -356,40 +357,71 @@ out_dev:
 	return rc;
 }
 
+static int phy_set_txpower(struct wpan_phy *phy, struct genl_info *info)
+{
+	int txpower = nla_get_s8(info->attrs[IEEE802154_ATTR_TXPOWER]);
+	int rc;
+
+	rc = phy->set_txpower(phy, txpower);
+	if (rc < 0)
+		return rc;
+
+	phy->transmit_power = txpower;
+
+	return 0;
+}
+
+static int phy_set_lbt(struct wpan_phy *phy, struct genl_info *info)
+{
+	u8 on = !!nla_get_u8(info->attrs[IEEE802154_ATTR_LBT_ENABLED]);
+	int rc;
+
+	rc = phy->set_lbt(phy, on);
+	if (rc < 0)
+		return rc;
+
+	phy->lbt = on;
+
+	return 0;
+}
+
 int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 {
 	struct wpan_phy *phy;
 	const char *name;
-	int txpower;
-	int rc = -EINVAL;
+	int rc = -ENOTSUPP;
 
 	pr_debug("%s\n", __func__);
 
-	if (!info->attrs[IEEE802154_ATTR_PHY_NAME])
+	if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
+	    !info->attrs[IEEE802154_ATTR_LBT_ENABLED])
 		return -EINVAL;
 
 	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
 	if (name[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1] != '\0')
 		return -EINVAL; /* phy name should be null-terminated */
 
-	txpower = nla_get_s8(info->attrs[IEEE802154_ATTR_TXPOWER]);
-
 	phy = wpan_phy_find(name);
 	if (!phy)
 		return -ENODEV;
 
-	if (!phy->set_txpower)
+	if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
+	    (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]))
 		goto out;
 
 	mutex_lock(&phy->pib_lock);
 
-	rc = phy->set_txpower(phy, txpower);
-	if (rc < 0) {
-		mutex_unlock(&phy->pib_lock);
-		goto out;
+	if (info->attrs[IEEE802154_ATTR_TXPOWER]) {
+		rc = phy_set_txpower(phy, info);
+		if (rc < 0)
+			goto error;
 	}
 
-	phy->transmit_power = txpower;
+	if (info->attrs[IEEE802154_ATTR_LBT_ENABLED]) {
+		rc = phy_set_lbt(phy, info);
+		if (rc < 0)
+			goto error;
+	}
 
 	mutex_unlock(&phy->pib_lock);
 
@@ -397,6 +429,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 
 	return 0;
 
+error:
+	mutex_unlock(&phy->pib_lock);
 out:
 	wpan_phy_put(phy);
 	return rc;
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index 90b1d0d2c14e..a09f6423a6e9 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -54,5 +54,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 	[IEEE802154_ATTR_CHANNEL_PAGE_LIST] = { .len = 32 * 4, },
 
 	[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
+	[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
 };
 
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 9eb49e0886a4..56338c8cfc33 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -175,6 +175,16 @@ static int mac802154_set_txpower(struct wpan_phy *phy, int db)
 	return priv->ops->set_txpower(&priv->hw, db);
 }
 
+static int mac802154_set_lbt(struct wpan_phy *phy, bool on)
+{
+	struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+	if (!priv->ops->set_lbt)
+		return -ENOTSUPP;
+
+	return priv->ops->set_lbt(&priv->hw, on);
+}
+
 struct ieee802154_dev *
 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
 {
@@ -253,6 +263,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
 	priv->phy->add_iface = mac802154_add_iface;
 	priv->phy->del_iface = mac802154_del_iface;
 	priv->phy->set_txpower = mac802154_set_txpower;
+	priv->phy->set_lbt = mac802154_set_lbt;
 
 	rc = wpan_phy_register(priv->phy);
 	if (rc < 0)
-- 
cgit v1.3-14-g43fede


From ba08fea53a43e02b590d89224afdad976dece841 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:11 +0100
Subject: ieee802154: add support for CCA mode in wpan phys

The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c |  9 +++++++++
 include/linux/nl802154.h           |  1 +
 include/net/mac802154.h            |  5 +++++
 include/net/wpan-phy.h             |  1 +
 net/ieee802154/nl-phy.c            | 32 +++++++++++++++++++++++++++++---
 net/ieee802154/nl_policy.c         |  1 +
 net/mac802154/ieee802154_dev.c     | 11 +++++++++++
 7 files changed, 57 insertions(+), 3 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 3d40c2350261..c60871aff333 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -794,6 +794,14 @@ at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
 	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
 }
 
+static int
+at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
+{
+	struct at86rf230_local *lp = dev->priv;
+
+	return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -814,6 +822,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
 	.set_txpower = at86rf212_set_txpower,
 	.set_lbt = at86rf212_set_lbt,
+	.set_cca_mode = at86rf212_set_cca_mode,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 326baee227f7..5edefc14bd83 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -72,6 +72,7 @@ enum {
 
 	IEEE802154_ATTR_TXPOWER,
 	IEEE802154_ATTR_LBT_ENABLED,
+	IEEE802154_ATTR_CCA_MODE,
 
 	__IEEE802154_ATTR_MAX,
 };
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 521edcb0e586..1a98e5014e66 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -122,6 +122,10 @@ struct ieee802154_dev {
  *	  Enables or disables listen before talk on the device. Called with
  *	  pib_lock held.
  *	  Returns either zero, or negative errno.
+ *
+ * set_cca_mode
+ *	  Sets the CCA mode used by the device. Called with pib_lock held.
+ *	  Returns either zero, or negative errno.
  */
 struct ieee802154_ops {
 	struct module	*owner;
@@ -140,6 +144,7 @@ struct ieee802154_ops {
 				     u8 addr[IEEE802154_ADDR_LEN]);
 	int		(*set_txpower)(struct ieee802154_dev *dev, int db);
 	int		(*set_lbt)(struct ieee802154_dev *dev, bool on);
+	int		(*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
 };
 
 /* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 804e6c4f5f8a..03b59051972d 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -58,6 +58,7 @@ struct wpan_phy {
 
 	int (*set_txpower)(struct wpan_phy *phy, int db);
 	int (*set_lbt)(struct wpan_phy *phy, bool on);
+	int (*set_cca_mode)(struct wpan_phy *phy, u8 cca_mode);
 
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index f029310b0662..36f58d633868 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -57,7 +57,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
 	    nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
 	    nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
-	    nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt))
+	    nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt) ||
+	    nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode))
 		goto nla_put_failure;
 	for (i = 0; i < 32; i++) {
 		if (phy->channels_supported[i])
@@ -385,6 +386,23 @@ static int phy_set_lbt(struct wpan_phy *phy, struct genl_info *info)
 	return 0;
 }
 
+static int phy_set_cca_mode(struct wpan_phy *phy, struct genl_info *info)
+{
+	u8 mode = nla_get_u8(info->attrs[IEEE802154_ATTR_CCA_MODE]);
+	int rc;
+
+	if (mode > 3)
+		return -EINVAL;
+
+	rc = phy->set_cca_mode(phy, mode);
+	if (rc < 0)
+		return rc;
+
+	phy->cca_mode = mode;
+
+	return 0;
+}
+
 int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 {
 	struct wpan_phy *phy;
@@ -394,7 +412,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 	pr_debug("%s\n", __func__);
 
 	if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
-	    !info->attrs[IEEE802154_ATTR_LBT_ENABLED])
+	    !info->attrs[IEEE802154_ATTR_LBT_ENABLED] &&
+	    !info->attrs[IEEE802154_ATTR_CCA_MODE])
 		return -EINVAL;
 
 	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
@@ -406,7 +425,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 		return -ENODEV;
 
 	if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
-	    (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]))
+	    (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]) ||
+	    (!phy->set_cca_mode && info->attrs[IEEE802154_ATTR_CCA_MODE]))
 		goto out;
 
 	mutex_lock(&phy->pib_lock);
@@ -423,6 +443,12 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 			goto error;
 	}
 
+	if (info->attrs[IEEE802154_ATTR_CCA_MODE]) {
+		rc = phy_set_cca_mode(phy, info);
+		if (rc < 0)
+			goto error;
+	}
+
 	mutex_unlock(&phy->pib_lock);
 
 	wpan_phy_put(phy);
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index a09f6423a6e9..d87c2c904110 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -55,5 +55,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 
 	[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
 	[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CCA_MODE] = { .type = NLA_U8, },
 };
 
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 56338c8cfc33..4965e4ce6b5b 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -185,6 +185,16 @@ static int mac802154_set_lbt(struct wpan_phy *phy, bool on)
 	return priv->ops->set_lbt(&priv->hw, on);
 }
 
+static int mac802154_set_cca_mode(struct wpan_phy *phy, u8 mode)
+{
+	struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+	if (!priv->ops->set_cca_mode)
+		return -ENOTSUPP;
+
+	return priv->ops->set_cca_mode(&priv->hw, mode);
+}
+
 struct ieee802154_dev *
 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
 {
@@ -264,6 +274,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
 	priv->phy->del_iface = mac802154_del_iface;
 	priv->phy->set_txpower = mac802154_set_txpower;
 	priv->phy->set_lbt = mac802154_set_lbt;
+	priv->phy->set_cca_mode = mac802154_set_cca_mode;
 
 	rc = wpan_phy_register(priv->phy);
 	if (rc < 0)
-- 
cgit v1.3-14-g43fede


From 6ca001978dce0d50ebac01a38d6287f241a520c6 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:12 +0100
Subject: ieee802154: add support for setting CCA energy detection levels

Since three of the four clear channel assesment modes make use of energy
detection, provide an API to set the energy detection threshold.
Driver support for this is available in at86rf230 for the RF212 chips.
Since for these chips the minimal energy detection threshold depends on
page and channel used, add a field to struct at86rf230_local that stores
the minimal threshold. Actual ED thresholds are configured as offsets
from this value.

For RF212, setting the ED threshold will not work before a channel/page
has been set due to the dependency of energy detection in the chip and
the actual channel/page selected.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ieee802154/at86rf230.c | 26 ++++++++++++++++++++++++--
 include/linux/nl802154.h           |  1 +
 include/net/mac802154.h            |  7 +++++++
 include/net/wpan-phy.h             |  2 ++
 net/ieee802154/nl-phy.c            | 30 +++++++++++++++++++++++++++---
 net/ieee802154/nl_policy.c         |  1 +
 net/mac802154/ieee802154_dev.c     | 11 +++++++++++
 7 files changed, 73 insertions(+), 5 deletions(-)

(limited to 'include/linux')

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index c60871aff333..20596be61028 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -52,6 +52,8 @@ struct at86rf230_local {
 	spinlock_t lock;
 	bool irq_busy;
 	bool is_tx;
+
+	int rssi_base_val;
 };
 
 static inline int is_rf212(struct at86rf230_local *local)
@@ -580,6 +582,8 @@ at86rf230_stop(struct ieee802154_dev *dev)
 static int
 at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
 {
+	lp->rssi_base_val = -91;
+
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
@@ -595,10 +599,13 @@ at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
 	if (rc < 0)
 		return rc;
 
-	if (page == 0)
+	if (page == 0) {
 		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
-	else
+		lp->rssi_base_val = -100;
+	} else {
 		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
+		lp->rssi_base_val = -98;
+	}
 	if (rc < 0)
 		return rc;
 
@@ -802,6 +809,20 @@ at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
 	return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
 }
 
+static int
+at86rf212_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
+{
+	struct at86rf230_local *lp = dev->priv;
+	int desens_steps;
+
+	if (level < lp->rssi_base_val || level > 30)
+		return -EINVAL;
+
+	desens_steps = (level - lp->rssi_base_val) * 100 / 207;
+
+	return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
+}
+
 static struct ieee802154_ops at86rf230_ops = {
 	.owner = THIS_MODULE,
 	.xmit = at86rf230_xmit,
@@ -823,6 +844,7 @@ static struct ieee802154_ops at86rf212_ops = {
 	.set_txpower = at86rf212_set_txpower,
 	.set_lbt = at86rf212_set_lbt,
 	.set_cca_mode = at86rf212_set_cca_mode,
+	.set_cca_ed_level = at86rf212_set_cca_ed_level,
 };
 
 static void at86rf230_irqwork(struct work_struct *work)
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 5edefc14bd83..0594a0ae71ba 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -73,6 +73,7 @@ enum {
 	IEEE802154_ATTR_TXPOWER,
 	IEEE802154_ATTR_LBT_ENABLED,
 	IEEE802154_ATTR_CCA_MODE,
+	IEEE802154_ATTR_CCA_ED_LEVEL,
 
 	__IEEE802154_ATTR_MAX,
 };
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 1a98e5014e66..15fe6bca80f0 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -126,6 +126,11 @@ struct ieee802154_dev {
  * set_cca_mode
  *	  Sets the CCA mode used by the device. Called with pib_lock held.
  *	  Returns either zero, or negative errno.
+ *
+ * set_cca_ed_level
+ *	  Sets the CCA energy detection threshold in dBm. Called with pib_lock
+ *	  held.
+ *	  Returns either zero, or negative errno.
  */
 struct ieee802154_ops {
 	struct module	*owner;
@@ -145,6 +150,8 @@ struct ieee802154_ops {
 	int		(*set_txpower)(struct ieee802154_dev *dev, int db);
 	int		(*set_lbt)(struct ieee802154_dev *dev, bool on);
 	int		(*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
+	int		(*set_cca_ed_level)(struct ieee802154_dev *dev,
+					    s32 level);
 };
 
 /* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 03b59051972d..0b570ad5e5fa 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -48,6 +48,7 @@ struct wpan_phy {
 	u8 cca_mode;
 
 	bool lbt;
+	s32 cca_ed_level;
 
 	struct device dev;
 	int idx;
@@ -59,6 +60,7 @@ struct wpan_phy {
 	int (*set_txpower)(struct wpan_phy *phy, int db);
 	int (*set_lbt)(struct wpan_phy *phy, bool on);
 	int (*set_cca_mode)(struct wpan_phy *phy, u8 cca_mode);
+	int (*set_cca_ed_level)(struct wpan_phy *phy, int level);
 
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index 36f58d633868..0af0d424dee0 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -58,7 +58,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
 	    nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
 	    nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt) ||
-	    nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode))
+	    nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode) ||
+	    nla_put_s32(msg, IEEE802154_ATTR_CCA_ED_LEVEL, phy->cca_ed_level))
 		goto nla_put_failure;
 	for (i = 0; i < 32; i++) {
 		if (phy->channels_supported[i])
@@ -403,6 +404,20 @@ static int phy_set_cca_mode(struct wpan_phy *phy, struct genl_info *info)
 	return 0;
 }
 
+static int phy_set_cca_ed_level(struct wpan_phy *phy, struct genl_info *info)
+{
+	s32 level = nla_get_s32(info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL]);
+	int rc;
+
+	rc = phy->set_cca_ed_level(phy, level);
+	if (rc < 0)
+		return rc;
+
+	phy->cca_ed_level = level;
+
+	return 0;
+}
+
 int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 {
 	struct wpan_phy *phy;
@@ -413,7 +428,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 
 	if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
 	    !info->attrs[IEEE802154_ATTR_LBT_ENABLED] &&
-	    !info->attrs[IEEE802154_ATTR_CCA_MODE])
+	    !info->attrs[IEEE802154_ATTR_CCA_MODE] &&
+	    !info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL])
 		return -EINVAL;
 
 	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
@@ -426,7 +442,9 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 
 	if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
 	    (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]) ||
-	    (!phy->set_cca_mode && info->attrs[IEEE802154_ATTR_CCA_MODE]))
+	    (!phy->set_cca_mode && info->attrs[IEEE802154_ATTR_CCA_MODE]) ||
+	    (!phy->set_cca_ed_level &&
+	     info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL]))
 		goto out;
 
 	mutex_lock(&phy->pib_lock);
@@ -449,6 +467,12 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 			goto error;
 	}
 
+	if (info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL]) {
+		rc = phy_set_cca_ed_level(phy, info);
+		if (rc < 0)
+			goto error;
+	}
+
 	mutex_unlock(&phy->pib_lock);
 
 	wpan_phy_put(phy);
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index d87c2c904110..55b5616295ff 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -56,5 +56,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 	[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
 	[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_CCA_MODE] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CCA_ED_LEVEL] = { .type = NLA_S32, },
 };
 
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 4965e4ce6b5b..4707f36546d3 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -195,6 +195,16 @@ static int mac802154_set_cca_mode(struct wpan_phy *phy, u8 mode)
 	return priv->ops->set_cca_mode(&priv->hw, mode);
 }
 
+static int mac802154_set_cca_ed_level(struct wpan_phy *phy, s32 level)
+{
+	struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+	if (!priv->ops->set_cca_ed_level)
+		return -ENOTSUPP;
+
+	return priv->ops->set_cca_ed_level(&priv->hw, level);
+}
+
 struct ieee802154_dev *
 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
 {
@@ -275,6 +285,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
 	priv->phy->set_txpower = mac802154_set_txpower;
 	priv->phy->set_lbt = mac802154_set_lbt;
 	priv->phy->set_cca_mode = mac802154_set_cca_mode;
+	priv->phy->set_cca_ed_level = mac802154_set_cca_ed_level;
 
 	rc = wpan_phy_register(priv->phy);
 	if (rc < 0)
-- 
cgit v1.3-14-g43fede


From 4244db1b0b7bc9ab7b67d8c1c38de6cf15bc87a8 Mon Sep 17 00:00:00 2001
From: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Date: Mon, 17 Feb 2014 11:34:14 +0100
Subject: ieee802154: add netlink APIs for smartMAC configuration

Introduce new netlink attributes for SET_PHY_ATTRS:
 * CSMA minimal backoff exponent
 * CSMA maximal backoff exponent
 * CSMA retry limit
 * frame retransmission limit

The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of
802.15.4, respectively. The frame retransmission shall correspond to
maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour
of the stack shall apply. For RF2xy, the old behaviour is to not do
channel sensing at all and simply send *right now*, which is not
intended behaviour for most applications and actually prohibited for
some channel/page combinations.

For all values except frame retransmission limit, the defaults of
802.15.4 apply. Frame retransmission limits are set to -1 to indicate
backward-compatible behaviour.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/nl802154.h       |  5 +++
 include/net/mac802154.h        | 12 ++++++++
 include/net/wpan-phy.h         |  7 +++++
 net/ieee802154/nl-phy.c        | 69 ++++++++++++++++++++++++++++++++++++++++--
 net/ieee802154/nl_policy.c     |  5 +++
 net/ieee802154/wpan-class.c    |  6 ++++
 net/mac802154/ieee802154_dev.c | 23 ++++++++++++++
 7 files changed, 125 insertions(+), 2 deletions(-)

(limited to 'include/linux')

diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 0594a0ae71ba..e110b8c266f5 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -74,6 +74,11 @@ enum {
 	IEEE802154_ATTR_LBT_ENABLED,
 	IEEE802154_ATTR_CCA_MODE,
 	IEEE802154_ATTR_CCA_ED_LEVEL,
+	IEEE802154_ATTR_CSMA_RETRIES,
+	IEEE802154_ATTR_CSMA_MIN_BE,
+	IEEE802154_ATTR_CSMA_MAX_BE,
+
+	IEEE802154_ATTR_FRAME_RETRIES,
 
 	__IEEE802154_ATTR_MAX,
 };
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 15fe6bca80f0..8ca3d04e7558 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -131,6 +131,14 @@ struct ieee802154_dev {
  *	  Sets the CCA energy detection threshold in dBm. Called with pib_lock
  *	  held.
  *	  Returns either zero, or negative errno.
+ *
+ * set_csma_params
+ *	  Sets the CSMA parameter set for the PHY. Called with pib_lock held.
+ *	  Returns either zero, or negative errno.
+ *
+ * set_frame_retries
+ *	  Sets the retransmission attempt limit. Called with pib_lock held.
+ *	  Returns either zero, or negative errno.
  */
 struct ieee802154_ops {
 	struct module	*owner;
@@ -152,6 +160,10 @@ struct ieee802154_ops {
 	int		(*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
 	int		(*set_cca_ed_level)(struct ieee802154_dev *dev,
 					    s32 level);
+	int		(*set_csma_params)(struct ieee802154_dev *dev,
+					   u8 min_be, u8 max_be, u8 retries);
+	int		(*set_frame_retries)(struct ieee802154_dev *dev,
+					     s8 retries);
 };
 
 /* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 0b570ad5e5fa..10ab0fc6d4f7 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -46,6 +46,10 @@ struct wpan_phy {
 	u32 channels_supported[32];
 	s8 transmit_power;
 	u8 cca_mode;
+	u8 min_be;
+	u8 max_be;
+	u8 csma_retries;
+	s8 frame_retries;
 
 	bool lbt;
 	s32 cca_ed_level;
@@ -61,6 +65,9 @@ struct wpan_phy {
 	int (*set_lbt)(struct wpan_phy *phy, bool on);
 	int (*set_cca_mode)(struct wpan_phy *phy, u8 cca_mode);
 	int (*set_cca_ed_level)(struct wpan_phy *phy, int level);
+	int (*set_csma_params)(struct wpan_phy *phy, u8 min_be, u8 max_be,
+			       u8 retries);
+	int (*set_frame_retries)(struct wpan_phy *phy, s8 retries);
 
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index 0af0d424dee0..c9dfd6f59e34 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -59,7 +59,11 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
 	    nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt) ||
 	    nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode) ||
-	    nla_put_s32(msg, IEEE802154_ATTR_CCA_ED_LEVEL, phy->cca_ed_level))
+	    nla_put_s32(msg, IEEE802154_ATTR_CCA_ED_LEVEL, phy->cca_ed_level) ||
+	    nla_put_u8(msg, IEEE802154_ATTR_CSMA_RETRIES, phy->csma_retries) ||
+	    nla_put_u8(msg, IEEE802154_ATTR_CSMA_MIN_BE, phy->min_be) ||
+	    nla_put_u8(msg, IEEE802154_ATTR_CSMA_MAX_BE, phy->max_be) ||
+	    nla_put_s8(msg, IEEE802154_ATTR_FRAME_RETRIES, phy->frame_retries))
 		goto nla_put_failure;
 	for (i = 0; i < 32; i++) {
 		if (phy->channels_supported[i])
@@ -418,6 +422,49 @@ static int phy_set_cca_ed_level(struct wpan_phy *phy, struct genl_info *info)
 	return 0;
 }
 
+static int phy_set_csma_params(struct wpan_phy *phy, struct genl_info *info)
+{
+	int rc;
+	u8 min_be = phy->min_be;
+	u8 max_be = phy->max_be;
+	u8 retries = phy->csma_retries;
+
+	if (info->attrs[IEEE802154_ATTR_CSMA_RETRIES])
+		retries = nla_get_u8(info->attrs[IEEE802154_ATTR_CSMA_RETRIES]);
+	if (info->attrs[IEEE802154_ATTR_CSMA_MIN_BE])
+		min_be = nla_get_u8(info->attrs[IEEE802154_ATTR_CSMA_MIN_BE]);
+	if (info->attrs[IEEE802154_ATTR_CSMA_MAX_BE])
+		max_be = nla_get_u8(info->attrs[IEEE802154_ATTR_CSMA_MAX_BE]);
+
+	if (retries > 5 || max_be > 8 || min_be > max_be ||
+	    retries < -1 || retries > 7)
+		return -EINVAL;
+
+	rc = phy->set_csma_params(phy, min_be, max_be, retries);
+	if (rc < 0)
+		return rc;
+
+	phy->min_be = min_be;
+	phy->max_be = max_be;
+	phy->csma_retries = retries;
+
+	return 0;
+}
+
+static int phy_set_frame_retries(struct wpan_phy *phy, struct genl_info *info)
+{
+	s8 retries = nla_get_s8(info->attrs[IEEE802154_ATTR_FRAME_RETRIES]);
+	int rc;
+
+	rc = phy->set_frame_retries(phy, retries);
+	if (rc < 0)
+		return rc;
+
+	phy->frame_retries = retries;
+
+	return 0;
+}
+
 int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 {
 	struct wpan_phy *phy;
@@ -429,7 +476,11 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 	if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
 	    !info->attrs[IEEE802154_ATTR_LBT_ENABLED] &&
 	    !info->attrs[IEEE802154_ATTR_CCA_MODE] &&
-	    !info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL])
+	    !info->attrs[IEEE802154_ATTR_CCA_ED_LEVEL] &&
+	    !info->attrs[IEEE802154_ATTR_CSMA_RETRIES] &&
+	    !info->attrs[IEEE802154_ATTR_CSMA_MIN_BE] &&
+	    !info->attrs[IEEE802154_ATTR_CSMA_MAX_BE] &&
+	    !info->attrs[IEEE802154_ATTR_FRAME_RETRIES])
 		return -EINVAL;
 
 	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
@@ -473,6 +524,20 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
 			goto error;
 	}
 
+	if (info->attrs[IEEE802154_ATTR_CSMA_RETRIES] ||
+	    info->attrs[IEEE802154_ATTR_CSMA_MIN_BE] ||
+	    info->attrs[IEEE802154_ATTR_CSMA_MAX_BE]) {
+		rc = phy_set_csma_params(phy, info);
+		if (rc < 0)
+			goto error;
+	}
+
+	if (info->attrs[IEEE802154_ATTR_FRAME_RETRIES]) {
+		rc = phy_set_frame_retries(phy, info);
+		if (rc < 0)
+			goto error;
+	}
+
 	mutex_unlock(&phy->pib_lock);
 
 	wpan_phy_put(phy);
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index 55b5616295ff..fd7be5e45cef 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -57,5 +57,10 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 	[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_CCA_MODE] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_CCA_ED_LEVEL] = { .type = NLA_S32, },
+	[IEEE802154_ATTR_CSMA_RETRIES] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CSMA_MIN_BE] = { .type = NLA_U8, },
+	[IEEE802154_ATTR_CSMA_MAX_BE] = { .type = NLA_U8, },
+
+	[IEEE802154_ATTR_FRAME_RETRIES] = { .type = NLA_S8, },
 };
 
diff --git a/net/ieee802154/wpan-class.c b/net/ieee802154/wpan-class.c
index 8d6f6704da84..edd0962d55f9 100644
--- a/net/ieee802154/wpan-class.c
+++ b/net/ieee802154/wpan-class.c
@@ -169,6 +169,12 @@ struct wpan_phy *wpan_phy_alloc(size_t priv_size)
 	phy->current_channel = -1; /* not initialised */
 	phy->current_page = 0; /* for compatibility */
 
+	/* defaults per 802.15.4-2011 */
+	phy->min_be = 3;
+	phy->max_be = 5;
+	phy->csma_retries = 4;
+	phy->frame_retries = -1; /* for compatibility, actual default is 3 */
+
 	return phy;
 
 out:
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 4707f36546d3..b75bb01e5c6b 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -205,6 +205,27 @@ static int mac802154_set_cca_ed_level(struct wpan_phy *phy, s32 level)
 	return priv->ops->set_cca_ed_level(&priv->hw, level);
 }
 
+static int mac802154_set_csma_params(struct wpan_phy *phy, u8 min_be,
+				     u8 max_be, u8 retries)
+{
+	struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+	if (!priv->ops->set_csma_params)
+		return -ENOTSUPP;
+
+	return priv->ops->set_csma_params(&priv->hw, min_be, max_be, retries);
+}
+
+static int mac802154_set_frame_retries(struct wpan_phy *phy, s8 retries)
+{
+	struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+	if (!priv->ops->set_frame_retries)
+		return -ENOTSUPP;
+
+	return priv->ops->set_frame_retries(&priv->hw, retries);
+}
+
 struct ieee802154_dev *
 ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
 {
@@ -286,6 +307,8 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
 	priv->phy->set_lbt = mac802154_set_lbt;
 	priv->phy->set_cca_mode = mac802154_set_cca_mode;
 	priv->phy->set_cca_ed_level = mac802154_set_cca_ed_level;
+	priv->phy->set_csma_params = mac802154_set_csma_params;
+	priv->phy->set_frame_retries = mac802154_set_frame_retries;
 
 	rc = wpan_phy_register(priv->phy);
 	if (rc < 0)
-- 
cgit v1.3-14-g43fede