From c6275e4b12bfb53097bca852dd49c15b1af50cb4 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 7 Dec 2018 19:21:10 +0100 Subject: soc: bcm2835: sync firmware properties with downstream Add latest firmware property tags from the latest Raspberry Pi downstream kernel. This is needed to use the reboot notify in the following commit. Signed-off-by: Stefan Wahren Reviewed-by: Eric Anholt --- include/soc/bcm2835/raspberrypi-firmware.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/soc') diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index 4be1aa4435ae..7800e12ee042 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -73,6 +73,8 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_GET_CUSTOMER_OTP = 0x00030021, RPI_FIRMWARE_GET_DOMAIN_STATE = 0x00030030, RPI_FIRMWARE_GET_THROTTLED = 0x00030046, + RPI_FIRMWARE_GET_CLOCK_MEASURED = 0x00030047, + RPI_FIRMWARE_NOTIFY_REBOOT = 0x00030048, RPI_FIRMWARE_SET_CLOCK_STATE = 0x00038001, RPI_FIRMWARE_SET_CLOCK_RATE = 0x00038002, RPI_FIRMWARE_SET_VOLTAGE = 0x00038003, @@ -86,6 +88,8 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043, RPI_FIRMWARE_GET_PERIPH_REG = 0x00030045, RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, + RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, + RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, /* Dispmanx TAGS */ -- cgit v1.2.3-59-g8ed1b