From bb992e72f9b751fceb04afeb7736b6a3e50effcf Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 8 Feb 2013 15:18:39 -0800 Subject: target: Fix error checking for UNMAP commands SBC-3 (revision 35) says: The PARAMETER LIST LENGTH field specifies the length in bytes of the UNMAP parameter list that is available to be transferred from the Data-Out Buffer. If the parameter list length is greater than zero and less than 0008h (i.e., eight), then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to PARAMETER LIST LENGTH ERROR. A PARAMETER LIST LENGTH set to zero specifies that no data shall be sent. so our sense code for too-short descriptors was wrong, and we were incorrectly failing commands that didn't transfer any descriptors. While we're at it, also handle the UNMAP check: If the ANCHOR bit is set to one, and the ANC_SUP bit in the Logical Block Provisioning VPD page (see 6.6.4) is set to zero, then the device server shall terminate the command with CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN CDB. (chris boot: Fix wrong cut+paste comment in transport_send_check_condition_and_sense) Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/target') diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index df14dce59191..c4af592f7057 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -195,6 +195,7 @@ enum tcm_sense_reason_table { TCM_RESERVATION_CONFLICT = R(0x10), TCM_ADDRESS_OUT_OF_RANGE = R(0x11), TCM_OUT_OF_RESOURCES = R(0x12), + TCM_PARAMETER_LIST_LENGTH_ERROR = R(0x13), #undef R }; -- cgit v1.2.3-59-g8ed1b