From 227c011b2e046dd4d36d9e00e3d9c88097b2a4c3 Mon Sep 17 00:00:00 2001 From: Roderick Colenbrander Date: Tue, 7 Mar 2017 15:45:00 -0800 Subject: HID: sony: Report DS4 motion sensors through a separate device The DS4 motion sensors are currently mapped by the hid-core driver to non-existing axes in between ABS_MISC and ABS_MT_SLOT, because the device already exhausted ABS_X-ABS_RZ. For a part the mapping by hid-core is accomplished by a fixup in hid-sony as the motion axes actually use vendor specific usage pages. This patch makes the DS4 use a separate input device for the motion sensors and reports acceleration data through ABS_X-ABS_Z and gyroscope data through ABS_RX-ABS_RZ. In addition it extends the event spec to allow gyroscope data through ABS_RX-ABS_RZ when INPUT_PROP_ACCELEROMETER is set. This change was suggested by Peter Hutterer during a discussion on linux-input. [jkosina@suse.cz: rebase onto slightly newer codebase] Signed-off-by: Roderick Colenbrander Signed-off-by: Jiri Kosina --- include/uapi/linux/input.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux/input.h') diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index e794f7bee22f..f561c0eb7d63 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -61,9 +61,14 @@ struct input_id { * Note that input core does not clamp reported values to the * [minimum, maximum] limits, such task is left to userspace. * - * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in - * units per millimeter (units/mm), resolution for rotational axes - * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. + * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) + * is reported in units per millimeter (units/mm), resolution + * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported + * in units per radian. + * When INPUT_PROP_ACCELEROMETER is set the resolution changes. + * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in + * in units per g (units/g) and in units per degree per second + * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). */ struct input_absinfo { __s32 value; -- cgit v1.2.3-59-g8ed1b