From c196f6ee61e42df9acec797ab41a0c8d87e8aa2e Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Thu, 18 Oct 2012 07:54:59 -0300 Subject: [media] media: add new mediabus format enums for dm365 add new enum entries for supporting the media-bus formats on dm365. These include some bayer and some non-bayer formats. V4L2_MBUS_FMT_YDYUYDYV8_1X16 and V4L2_MBUS_FMT_UV8_1X8 are used internal to the hardware by the resizer. V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 represents the bayer ALAW format that is supported by dm365 hardware. Signed-off-by: Manjunath Hadli Signed-off-by: Lad, Prabhakar Acked-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-mediabus.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index 7d64e0e1a18b..e860f55820ec 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -47,8 +47,9 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2014 */ + /* YUV (including grey) - next is 0x2016 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, + V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, V4L2_MBUS_FMT_YUYV8_1_5X8 = 0x2004, @@ -65,14 +66,19 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, V4L2_MBUS_FMT_YVYU8_1X16 = 0x2012, + V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, - /* Bayer - next is 0x3015 */ + /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, + V4L2_MBUS_FMT_SBGGR10_ALAW8_1X8 = 0x3015, + V4L2_MBUS_FMT_SGBRG10_ALAW8_1X8 = 0x3016, + V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8 = 0x3017, + V4L2_MBUS_FMT_SRGGB10_ALAW8_1X8 = 0x3018, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, -- cgit v1.3-14-g43fede From 05ad6fc1d54f106d5b8c598e2f9b59b12f3fb476 Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Thu, 18 Oct 2012 07:58:02 -0300 Subject: [media] v4l2: add new pixel formats supported on dm365 add new macro V4L2_PIX_FMT_SGRBG10ALAW8 and associated formats to represent Bayer format frames compressed by A-LAW algorithm, add V4L2_PIX_FMT_UV8 to represent storage of CbCr data (UV interleaved) only. Signed-off-by: Manjunath Hadli Signed-off-by: Lad, Prabhakar Acked-by: Sakari Ailus Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/pixfmt-srggb10alaw8.xml | 34 ++++++++++++ Documentation/DocBook/media/v4l/pixfmt-uv8.xml | 62 ++++++++++++++++++++++ Documentation/DocBook/media/v4l/pixfmt.xml | 2 + include/uapi/linux/videodev2.h | 8 +++ 4 files changed, 106 insertions(+) create mode 100644 Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml create mode 100644 Documentation/DocBook/media/v4l/pixfmt-uv8.xml (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml new file mode 100644 index 000000000000..c934192e98ce --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10alaw8.xml @@ -0,0 +1,34 @@ + + + + V4L2_PIX_FMT_SBGGR10ALAW8 ('aBA8'), + V4L2_PIX_FMT_SGBRG10ALAW8 ('aGA8'), + V4L2_PIX_FMT_SGRBG10ALAW8 ('agA8'), + V4L2_PIX_FMT_SRGGB10ALAW8 ('aRA8'), + + &manvol; + + + + V4L2_PIX_FMT_SBGGR10ALAW8 + + + V4L2_PIX_FMT_SGBRG10ALAW8 + + + V4L2_PIX_FMT_SGRBG10ALAW8 + + + V4L2_PIX_FMT_SRGGB10ALAW8 + + 10-bit Bayer formats compressed to 8 bits + + + Description + The following four pixel formats are raw sRGB / Bayer + formats with 10 bits per color compressed to 8 bits each, + using the A-LAW algorithm. Each color component consumes 8 + bits of memory. In other respects this format is similar to + . + + diff --git a/Documentation/DocBook/media/v4l/pixfmt-uv8.xml b/Documentation/DocBook/media/v4l/pixfmt-uv8.xml new file mode 100644 index 000000000000..c507c1f73cd0 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-uv8.xml @@ -0,0 +1,62 @@ + + + V4L2_PIX_FMT_UV8 ('UV8') + &manvol; + + + V4L2_PIX_FMT_UV8 + UV plane interleaved + + + Description + In this format there is no Y plane, Only CbCr plane. ie + (UV interleaved) + + + <constant>V4L2_PIX_FMT_UV8</constant> + pixel image + + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Cb00 + Cr00 + Cb01 + Cr01 + + + start + 4: + Cb10 + Cr10 + Cb11 + Cr11 + + + start + 8: + Cb20 + Cr20 + Cb21 + Cr21 + + + start + 12: + Cb30 + Cr30 + Cb31 + Cr31 + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index bf94f417592c..99b8d2ad6e4f 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.< &sub-srggb8; &sub-sbggr16; &sub-srggb10; + &sub-srggb10alaw8; &sub-srggb10dpcm8; &sub-srggb12; @@ -701,6 +702,7 @@ information. &sub-y12; &sub-y10b; &sub-y16; + &sub-uv8; &sub-yuyv; &sub-uyvy; &sub-yvyu; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 3cf3e946e331..39d2cecdf38c 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -334,6 +334,9 @@ struct v4l2_pix_format { /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ +/* Chrominance formats */ +#define V4L2_PIX_FMT_UV8 v4l2_fourcc('U', 'V', '8', ' ') /* 8 UV 4:4 */ + /* Luminance+Chrominance formats */ #define V4L2_PIX_FMT_YVU410 v4l2_fourcc('Y', 'V', 'U', '9') /* 9 YVU 4:1:0 */ #define V4L2_PIX_FMT_YVU420 v4l2_fourcc('Y', 'V', '1', '2') /* 12 YVU 4:2:0 */ @@ -386,6 +389,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12 GBGB.. RGRG.. */ #define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12 GRGR.. BGBG.. */ #define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12 RGRG.. GBGB.. */ + /* 10bit raw bayer a-law compressed to 8 bits */ +#define V4L2_PIX_FMT_SBGGR10ALAW8 v4l2_fourcc('a', 'B', 'A', '8') +#define V4L2_PIX_FMT_SGBRG10ALAW8 v4l2_fourcc('a', 'G', 'A', '8') +#define V4L2_PIX_FMT_SGRBG10ALAW8 v4l2_fourcc('a', 'g', 'A', '8') +#define V4L2_PIX_FMT_SRGGB10ALAW8 v4l2_fourcc('a', 'R', 'A', '8') /* 10bit raw bayer DPCM compressed to 8 bits */ #define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8') #define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8') -- cgit v1.3-14-g43fede From ee7afd717c26299c85675d84c7ff89a9c989f4fa Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 19 Dec 2012 16:07:23 +0000 Subject: UAPI: (Scripted) Disintegrate include/scsi Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/scsi/Kbuild | 3 - include/scsi/scsi_bsg_fc.h | 320 ------------------------------------ include/scsi/scsi_netlink.h | 123 -------------- include/scsi/scsi_netlink_fc.h | 71 -------- include/uapi/scsi/Kbuild | 3 + include/uapi/scsi/scsi_bsg_fc.h | 320 ++++++++++++++++++++++++++++++++++++ include/uapi/scsi/scsi_netlink.h | 123 ++++++++++++++ include/uapi/scsi/scsi_netlink_fc.h | 71 ++++++++ 8 files changed, 517 insertions(+), 517 deletions(-) delete mode 100644 include/scsi/scsi_bsg_fc.h delete mode 100644 include/scsi/scsi_netlink.h delete mode 100644 include/scsi/scsi_netlink_fc.h create mode 100644 include/uapi/scsi/scsi_bsg_fc.h create mode 100644 include/uapi/scsi/scsi_netlink.h create mode 100644 include/uapi/scsi/scsi_netlink_fc.h (limited to 'include/uapi') diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild index f2b94918994d..562ff9d591b8 100644 --- a/include/scsi/Kbuild +++ b/include/scsi/Kbuild @@ -1,4 +1 @@ -header-y += scsi_netlink.h -header-y += scsi_netlink_fc.h -header-y += scsi_bsg_fc.h header-y += fc/ diff --git a/include/scsi/scsi_bsg_fc.h b/include/scsi/scsi_bsg_fc.h deleted file mode 100644 index 3031b900b087..000000000000 --- a/include/scsi/scsi_bsg_fc.h +++ /dev/null @@ -1,320 +0,0 @@ -/* - * FC Transport BSG Interface - * - * Copyright (C) 2008 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef SCSI_BSG_FC_H -#define SCSI_BSG_FC_H - -/* - * This file intended to be included by both kernel and user space - */ - -/* - * FC Transport SGIO v4 BSG Message Support - */ - -/* Default BSG request timeout (in seconds) */ -#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ) - - -/* - * Request Message Codes supported by the FC Transport - */ - -/* define the class masks for the message codes */ -#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */ -#define FC_BSG_HST_MASK 0x80000000 /* fc host class */ -#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */ - - /* fc_host Message Codes */ -#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001) -#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002) -#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003) -#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004) -#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF) - - /* fc_rport Message Codes */ -#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001) -#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002) - - - -/* - * FC Address Identifiers in Message Structures : - * - * Whenever a command payload contains a FC Address Identifier - * (aka port_id), the value is effectively in big-endian - * order, thus the array elements are decoded as follows: - * element [0] is bits 23:16 of the FC Address Identifier - * element [1] is bits 15:8 of the FC Address Identifier - * element [2] is bits 7:0 of the FC Address Identifier - */ - - -/* - * FC Host Messages - */ - -/* FC_BSG_HST_ADDR_PORT : */ - -/* Request: - * This message requests the FC host to login to the remote port - * at the specified N_Port_Id. The remote port is to be enumerated - * with the transport upon completion of the login. - */ -struct fc_bsg_host_add_rport { - uint8_t reserved; - - /* FC Address Identier of the remote port to login to */ - uint8_t port_id[3]; -}; - -/* Response: - * There is no additional response data - fc_bsg_reply->result is sufficient - */ - - -/* FC_BSG_HST_DEL_RPORT : */ - -/* Request: - * This message requests the FC host to remove an enumerated - * remote port and to terminate the login to it. - * - * Note: The driver is free to reject this request if it desires to - * remain logged in with the remote port. - */ -struct fc_bsg_host_del_rport { - uint8_t reserved; - - /* FC Address Identier of the remote port to logout of */ - uint8_t port_id[3]; -}; - -/* Response: - * There is no additional response data - fc_bsg_reply->result is sufficient - */ - - -/* FC_BSG_HST_ELS_NOLOGIN : */ - -/* Request: - * This message requests the FC_Host to send an ELS to a specific - * N_Port_ID. The host does not need to log into the remote port, - * nor does it need to enumerate the rport for further traffic - * (although, the FC host is free to do so if it desires). - */ -struct fc_bsg_host_els { - /* - * ELS Command Code being sent (must be the same as byte 0 - * of the payload) - */ - uint8_t command_code; - - /* FC Address Identier of the remote port to send the ELS to */ - uint8_t port_id[3]; -}; - -/* Response: - */ -/* fc_bsg_ctels_reply->status values */ -#define FC_CTELS_STATUS_OK 0x00000000 -#define FC_CTELS_STATUS_REJECT 0x00000001 -#define FC_CTELS_STATUS_P_RJT 0x00000002 -#define FC_CTELS_STATUS_F_RJT 0x00000003 -#define FC_CTELS_STATUS_P_BSY 0x00000004 -#define FC_CTELS_STATUS_F_BSY 0x00000006 -struct fc_bsg_ctels_reply { - /* - * Note: An ELS LS_RJT may be reported in 2 ways: - * a) A status of FC_CTELS_STATUS_OK is returned. The caller - * is to look into the ELS receive payload to determine - * LS_ACC or LS_RJT (by contents of word 0). The reject - * data will be in word 1. - * b) A status of FC_CTELS_STATUS_REJECT is returned, The - * rjt_data field will contain valid data. - * - * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and - * the receive payload word 0 indicates LS_ACC - * (e.g. value is 0x02xxxxxx). - * - * Note: Similarly, a CT Reject may be reported in 2 ways: - * a) A status of FC_CTELS_STATUS_OK is returned. The caller - * is to look into the CT receive payload to determine - * Accept or Reject (by contents of word 2). The reject - * data will be in word 3. - * b) A status of FC_CTELS_STATUS_REJECT is returned, The - * rjt_data field will contain valid data. - * - * Note: x_RJT/BSY status will indicae that the rjt_data field - * is valid and contains the reason/explanation values. - */ - uint32_t status; /* See FC_CTELS_STATUS_xxx */ - - /* valid if status is not FC_CTELS_STATUS_OK */ - struct { - uint8_t action; /* fragment_id for CT REJECT */ - uint8_t reason_code; - uint8_t reason_explanation; - uint8_t vendor_unique; - } rjt_data; -}; - - -/* FC_BSG_HST_CT : */ - -/* Request: - * This message requests that a CT Request be performed with the - * indicated N_Port_ID. The driver is responsible for logging in with - * the fabric and/or N_Port_ID, etc as per FC rules. This request does - * not mandate that the driver must enumerate the destination in the - * transport. The driver is allowed to decide whether to enumerate it, - * and whether to tear it down after the request. - */ -struct fc_bsg_host_ct { - uint8_t reserved; - - /* FC Address Identier of the remote port to send the ELS to */ - uint8_t port_id[3]; - - /* - * We need words 0-2 of the generic preamble for the LLD's - */ - uint32_t preamble_word0; /* revision & IN_ID */ - uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ - uint32_t preamble_word2; /* Cmd Code, Max Size */ - -}; -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - -/* FC_BSG_HST_VENDOR : */ - -/* Request: - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified in scsi_netlink.h - */ -struct fc_bsg_host_vendor { - /* - * Identifies the vendor that the message is formatted for. This - * should be the recipient of the message. - */ - uint64_t vendor_id; - - /* start of vendor command area */ - uint32_t vendor_cmd[0]; -}; - -/* Response: - */ -struct fc_bsg_host_vendor_reply { - /* start of vendor response area */ - uint32_t vendor_rsp[0]; -}; - - - -/* - * FC Remote Port Messages - */ - -/* FC_BSG_RPT_ELS : */ - -/* Request: - * This message requests that an ELS be performed with the rport. - */ -struct fc_bsg_rport_els { - /* - * ELS Command Code being sent (must be the same as - * byte 0 of the payload) - */ - uint8_t els_code; -}; - -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - -/* FC_BSG_RPT_CT : */ - -/* Request: - * This message requests that a CT Request be performed with the rport. - */ -struct fc_bsg_rport_ct { - /* - * We need words 0-2 of the generic preamble for the LLD's - */ - uint32_t preamble_word0; /* revision & IN_ID */ - uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ - uint32_t preamble_word2; /* Cmd Code, Max Size */ -}; -/* Response: - * - * The reply structure is an fc_bsg_ctels_reply structure - */ - - - - -/* request (CDB) structure of the sg_io_v4 */ -struct fc_bsg_request { - uint32_t msgcode; - union { - struct fc_bsg_host_add_rport h_addrport; - struct fc_bsg_host_del_rport h_delrport; - struct fc_bsg_host_els h_els; - struct fc_bsg_host_ct h_ct; - struct fc_bsg_host_vendor h_vendor; - - struct fc_bsg_rport_els r_els; - struct fc_bsg_rport_ct r_ct; - } rqst_data; -} __attribute__((packed)); - - -/* response (request sense data) structure of the sg_io_v4 */ -struct fc_bsg_reply { - /* - * The completion result. Result exists in two forms: - * if negative, it is an -Exxx system errno value. There will - * be no further reply information supplied. - * else, it's the 4-byte scsi error result, with driver, host, - * msg and status fields. The per-msgcode reply structure - * will contain valid data. - */ - uint32_t result; - - /* If there was reply_payload, how much was recevied ? */ - uint32_t reply_payload_rcv_len; - - union { - struct fc_bsg_host_vendor_reply vendor_reply; - - struct fc_bsg_ctels_reply ctels_reply; - } reply_data; -}; - - -#endif /* SCSI_BSG_FC_H */ - diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h deleted file mode 100644 index 62b4edab15d3..000000000000 --- a/include/scsi/scsi_netlink.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * SCSI Transport Netlink Interface - * Used for the posting of outbound SCSI transport events - * - * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef SCSI_NETLINK_H -#define SCSI_NETLINK_H - -#include -#include - -/* - * This file intended to be included by both kernel and user space - */ - -/* Single Netlink Message type to send all SCSI Transport messages */ -#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1 - -/* SCSI Transport Broadcast Groups */ - /* leaving groups 0 and 1 unassigned */ -#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */ -#define SCSI_NL_GRP_CNT 3 - - -/* SCSI_TRANSPORT_MSG event message header */ -struct scsi_nl_hdr { - uint8_t version; - uint8_t transport; - uint16_t magic; - uint16_t msgtype; - uint16_t msglen; -} __attribute__((aligned(sizeof(uint64_t)))); - -/* scsi_nl_hdr->version value */ -#define SCSI_NL_VERSION 1 - -/* scsi_nl_hdr->magic value */ -#define SCSI_NL_MAGIC 0xA1B2 - -/* scsi_nl_hdr->transport value */ -#define SCSI_NL_TRANSPORT 0 -#define SCSI_NL_TRANSPORT_FC 1 -#define SCSI_NL_MAX_TRANSPORTS 2 - -/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */ - -/* - * GENERIC SCSI scsi_nl_hdr->msgtype Values - */ - /* kernel -> user */ -#define SCSI_NL_SHOST_VENDOR 0x0001 - /* user -> kernel */ -/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */ - - -/* - * Message Structures : - */ - -/* macro to round up message lengths to 8byte boundary */ -#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7) - - -/* - * SCSI HOST Vendor Unique messages : - * SCSI_NL_SHOST_VENDOR - * - * Note: The Vendor Unique message payload will begin directly after - * this structure, with the length of the payload per vmsg_datalen. - * - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified below - */ -struct scsi_nl_host_vendor_msg { - struct scsi_nl_hdr snlh; /* must be 1st element ! */ - uint64_t vendor_id; - uint16_t host_no; - uint16_t vmsg_datalen; -} __attribute__((aligned(sizeof(uint64_t)))); - - -/* - * Vendor ID: - * If transports post vendor-unique events, they must pass a well-known - * 32-bit vendor identifier. This identifier consists of 8 bits indicating - * the "type" of identifier contained, and 24 bits of id data. - * - * Identifiers for each type: - * PCI : ID data is the 16 bit PCI Registered Vendor ID - */ -#define SCSI_NL_VID_TYPE_SHIFT 56 -#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT) -#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT) -#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK) - - -#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \ - { \ - (hdr)->version = SCSI_NL_VERSION; \ - (hdr)->transport = t; \ - (hdr)->magic = SCSI_NL_MAGIC; \ - (hdr)->msgtype = mtype; \ - (hdr)->msglen = mlen; \ - } - -#endif /* SCSI_NETLINK_H */ - diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h deleted file mode 100644 index cbf76e479761..000000000000 --- a/include/scsi/scsi_netlink_fc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * FC Transport Netlink Interface - * - * Copyright (C) 2006 James Smart, Emulex Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef SCSI_NETLINK_FC_H -#define SCSI_NETLINK_FC_H - -#include - -/* - * This file intended to be included by both kernel and user space - */ - -/* - * FC Transport Message Types - */ - /* kernel -> user */ -#define FC_NL_ASYNC_EVENT 0x0100 - /* user -> kernel */ -/* none */ - - -/* - * Message Structures : - */ - -/* macro to round up message lengths to 8byte boundary */ -#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7) - - -/* - * FC Transport Broadcast Event Message : - * FC_NL_ASYNC_EVENT - * - * Note: if Vendor Unique message, &event_data will be start of - * vendor unique payload, and the length of the payload is - * per event_datalen - * - * Note: When specifying vendor_id, be sure to read the Vendor Type and ID - * formatting requirements specified in scsi_netlink.h - */ -struct fc_nl_event { - struct scsi_nl_hdr snlh; /* must be 1st element ! */ - uint64_t seconds; - uint64_t vendor_id; - uint16_t host_no; - uint16_t event_datalen; - uint32_t event_num; - uint32_t event_code; - uint32_t event_data; -} __attribute__((aligned(sizeof(uint64_t)))); - - -#endif /* SCSI_NETLINK_FC_H */ - diff --git a/include/uapi/scsi/Kbuild b/include/uapi/scsi/Kbuild index 29a87dd26cfb..75746d52f208 100644 --- a/include/uapi/scsi/Kbuild +++ b/include/uapi/scsi/Kbuild @@ -1,2 +1,5 @@ # UAPI Header export list header-y += fc/ +header-y += scsi_bsg_fc.h +header-y += scsi_netlink.h +header-y += scsi_netlink_fc.h diff --git a/include/uapi/scsi/scsi_bsg_fc.h b/include/uapi/scsi/scsi_bsg_fc.h new file mode 100644 index 000000000000..3031b900b087 --- /dev/null +++ b/include/uapi/scsi/scsi_bsg_fc.h @@ -0,0 +1,320 @@ +/* + * FC Transport BSG Interface + * + * Copyright (C) 2008 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef SCSI_BSG_FC_H +#define SCSI_BSG_FC_H + +/* + * This file intended to be included by both kernel and user space + */ + +/* + * FC Transport SGIO v4 BSG Message Support + */ + +/* Default BSG request timeout (in seconds) */ +#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ) + + +/* + * Request Message Codes supported by the FC Transport + */ + +/* define the class masks for the message codes */ +#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */ +#define FC_BSG_HST_MASK 0x80000000 /* fc host class */ +#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */ + + /* fc_host Message Codes */ +#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001) +#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002) +#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003) +#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004) +#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF) + + /* fc_rport Message Codes */ +#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001) +#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002) + + + +/* + * FC Address Identifiers in Message Structures : + * + * Whenever a command payload contains a FC Address Identifier + * (aka port_id), the value is effectively in big-endian + * order, thus the array elements are decoded as follows: + * element [0] is bits 23:16 of the FC Address Identifier + * element [1] is bits 15:8 of the FC Address Identifier + * element [2] is bits 7:0 of the FC Address Identifier + */ + + +/* + * FC Host Messages + */ + +/* FC_BSG_HST_ADDR_PORT : */ + +/* Request: + * This message requests the FC host to login to the remote port + * at the specified N_Port_Id. The remote port is to be enumerated + * with the transport upon completion of the login. + */ +struct fc_bsg_host_add_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to login to */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_DEL_RPORT : */ + +/* Request: + * This message requests the FC host to remove an enumerated + * remote port and to terminate the login to it. + * + * Note: The driver is free to reject this request if it desires to + * remain logged in with the remote port. + */ +struct fc_bsg_host_del_rport { + uint8_t reserved; + + /* FC Address Identier of the remote port to logout of */ + uint8_t port_id[3]; +}; + +/* Response: + * There is no additional response data - fc_bsg_reply->result is sufficient + */ + + +/* FC_BSG_HST_ELS_NOLOGIN : */ + +/* Request: + * This message requests the FC_Host to send an ELS to a specific + * N_Port_ID. The host does not need to log into the remote port, + * nor does it need to enumerate the rport for further traffic + * (although, the FC host is free to do so if it desires). + */ +struct fc_bsg_host_els { + /* + * ELS Command Code being sent (must be the same as byte 0 + * of the payload) + */ + uint8_t command_code; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; +}; + +/* Response: + */ +/* fc_bsg_ctels_reply->status values */ +#define FC_CTELS_STATUS_OK 0x00000000 +#define FC_CTELS_STATUS_REJECT 0x00000001 +#define FC_CTELS_STATUS_P_RJT 0x00000002 +#define FC_CTELS_STATUS_F_RJT 0x00000003 +#define FC_CTELS_STATUS_P_BSY 0x00000004 +#define FC_CTELS_STATUS_F_BSY 0x00000006 +struct fc_bsg_ctels_reply { + /* + * Note: An ELS LS_RJT may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the ELS receive payload to determine + * LS_ACC or LS_RJT (by contents of word 0). The reject + * data will be in word 1. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and + * the receive payload word 0 indicates LS_ACC + * (e.g. value is 0x02xxxxxx). + * + * Note: Similarly, a CT Reject may be reported in 2 ways: + * a) A status of FC_CTELS_STATUS_OK is returned. The caller + * is to look into the CT receive payload to determine + * Accept or Reject (by contents of word 2). The reject + * data will be in word 3. + * b) A status of FC_CTELS_STATUS_REJECT is returned, The + * rjt_data field will contain valid data. + * + * Note: x_RJT/BSY status will indicae that the rjt_data field + * is valid and contains the reason/explanation values. + */ + uint32_t status; /* See FC_CTELS_STATUS_xxx */ + + /* valid if status is not FC_CTELS_STATUS_OK */ + struct { + uint8_t action; /* fragment_id for CT REJECT */ + uint8_t reason_code; + uint8_t reason_explanation; + uint8_t vendor_unique; + } rjt_data; +}; + + +/* FC_BSG_HST_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the + * indicated N_Port_ID. The driver is responsible for logging in with + * the fabric and/or N_Port_ID, etc as per FC rules. This request does + * not mandate that the driver must enumerate the destination in the + * transport. The driver is allowed to decide whether to enumerate it, + * and whether to tear it down after the request. + */ +struct fc_bsg_host_ct { + uint8_t reserved; + + /* FC Address Identier of the remote port to send the ELS to */ + uint8_t port_id[3]; + + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ + +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_HST_VENDOR : */ + +/* Request: + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified in scsi_netlink.h + */ +struct fc_bsg_host_vendor { + /* + * Identifies the vendor that the message is formatted for. This + * should be the recipient of the message. + */ + uint64_t vendor_id; + + /* start of vendor command area */ + uint32_t vendor_cmd[0]; +}; + +/* Response: + */ +struct fc_bsg_host_vendor_reply { + /* start of vendor response area */ + uint32_t vendor_rsp[0]; +}; + + + +/* + * FC Remote Port Messages + */ + +/* FC_BSG_RPT_ELS : */ + +/* Request: + * This message requests that an ELS be performed with the rport. + */ +struct fc_bsg_rport_els { + /* + * ELS Command Code being sent (must be the same as + * byte 0 of the payload) + */ + uint8_t els_code; +}; + +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + +/* FC_BSG_RPT_CT : */ + +/* Request: + * This message requests that a CT Request be performed with the rport. + */ +struct fc_bsg_rport_ct { + /* + * We need words 0-2 of the generic preamble for the LLD's + */ + uint32_t preamble_word0; /* revision & IN_ID */ + uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */ + uint32_t preamble_word2; /* Cmd Code, Max Size */ +}; +/* Response: + * + * The reply structure is an fc_bsg_ctels_reply structure + */ + + + + +/* request (CDB) structure of the sg_io_v4 */ +struct fc_bsg_request { + uint32_t msgcode; + union { + struct fc_bsg_host_add_rport h_addrport; + struct fc_bsg_host_del_rport h_delrport; + struct fc_bsg_host_els h_els; + struct fc_bsg_host_ct h_ct; + struct fc_bsg_host_vendor h_vendor; + + struct fc_bsg_rport_els r_els; + struct fc_bsg_rport_ct r_ct; + } rqst_data; +} __attribute__((packed)); + + +/* response (request sense data) structure of the sg_io_v4 */ +struct fc_bsg_reply { + /* + * The completion result. Result exists in two forms: + * if negative, it is an -Exxx system errno value. There will + * be no further reply information supplied. + * else, it's the 4-byte scsi error result, with driver, host, + * msg and status fields. The per-msgcode reply structure + * will contain valid data. + */ + uint32_t result; + + /* If there was reply_payload, how much was recevied ? */ + uint32_t reply_payload_rcv_len; + + union { + struct fc_bsg_host_vendor_reply vendor_reply; + + struct fc_bsg_ctels_reply ctels_reply; + } reply_data; +}; + + +#endif /* SCSI_BSG_FC_H */ + diff --git a/include/uapi/scsi/scsi_netlink.h b/include/uapi/scsi/scsi_netlink.h new file mode 100644 index 000000000000..62b4edab15d3 --- /dev/null +++ b/include/uapi/scsi/scsi_netlink.h @@ -0,0 +1,123 @@ +/* + * SCSI Transport Netlink Interface + * Used for the posting of outbound SCSI transport events + * + * Copyright (C) 2006 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef SCSI_NETLINK_H +#define SCSI_NETLINK_H + +#include +#include + +/* + * This file intended to be included by both kernel and user space + */ + +/* Single Netlink Message type to send all SCSI Transport messages */ +#define SCSI_TRANSPORT_MSG NLMSG_MIN_TYPE + 1 + +/* SCSI Transport Broadcast Groups */ + /* leaving groups 0 and 1 unassigned */ +#define SCSI_NL_GRP_FC_EVENTS (1<<2) /* Group 2 */ +#define SCSI_NL_GRP_CNT 3 + + +/* SCSI_TRANSPORT_MSG event message header */ +struct scsi_nl_hdr { + uint8_t version; + uint8_t transport; + uint16_t magic; + uint16_t msgtype; + uint16_t msglen; +} __attribute__((aligned(sizeof(uint64_t)))); + +/* scsi_nl_hdr->version value */ +#define SCSI_NL_VERSION 1 + +/* scsi_nl_hdr->magic value */ +#define SCSI_NL_MAGIC 0xA1B2 + +/* scsi_nl_hdr->transport value */ +#define SCSI_NL_TRANSPORT 0 +#define SCSI_NL_TRANSPORT_FC 1 +#define SCSI_NL_MAX_TRANSPORTS 2 + +/* Transport-based scsi_nl_hdr->msgtype values are defined in each transport */ + +/* + * GENERIC SCSI scsi_nl_hdr->msgtype Values + */ + /* kernel -> user */ +#define SCSI_NL_SHOST_VENDOR 0x0001 + /* user -> kernel */ +/* SCSI_NL_SHOST_VENDOR msgtype is kernel->user and user->kernel */ + + +/* + * Message Structures : + */ + +/* macro to round up message lengths to 8byte boundary */ +#define SCSI_NL_MSGALIGN(len) (((len) + 7) & ~7) + + +/* + * SCSI HOST Vendor Unique messages : + * SCSI_NL_SHOST_VENDOR + * + * Note: The Vendor Unique message payload will begin directly after + * this structure, with the length of the payload per vmsg_datalen. + * + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified below + */ +struct scsi_nl_host_vendor_msg { + struct scsi_nl_hdr snlh; /* must be 1st element ! */ + uint64_t vendor_id; + uint16_t host_no; + uint16_t vmsg_datalen; +} __attribute__((aligned(sizeof(uint64_t)))); + + +/* + * Vendor ID: + * If transports post vendor-unique events, they must pass a well-known + * 32-bit vendor identifier. This identifier consists of 8 bits indicating + * the "type" of identifier contained, and 24 bits of id data. + * + * Identifiers for each type: + * PCI : ID data is the 16 bit PCI Registered Vendor ID + */ +#define SCSI_NL_VID_TYPE_SHIFT 56 +#define SCSI_NL_VID_TYPE_MASK ((__u64)0xFF << SCSI_NL_VID_TYPE_SHIFT) +#define SCSI_NL_VID_TYPE_PCI ((__u64)0x01 << SCSI_NL_VID_TYPE_SHIFT) +#define SCSI_NL_VID_ID_MASK (~ SCSI_NL_VID_TYPE_MASK) + + +#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen) \ + { \ + (hdr)->version = SCSI_NL_VERSION; \ + (hdr)->transport = t; \ + (hdr)->magic = SCSI_NL_MAGIC; \ + (hdr)->msgtype = mtype; \ + (hdr)->msglen = mlen; \ + } + +#endif /* SCSI_NETLINK_H */ + diff --git a/include/uapi/scsi/scsi_netlink_fc.h b/include/uapi/scsi/scsi_netlink_fc.h new file mode 100644 index 000000000000..cbf76e479761 --- /dev/null +++ b/include/uapi/scsi/scsi_netlink_fc.h @@ -0,0 +1,71 @@ +/* + * FC Transport Netlink Interface + * + * Copyright (C) 2006 James Smart, Emulex Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef SCSI_NETLINK_FC_H +#define SCSI_NETLINK_FC_H + +#include + +/* + * This file intended to be included by both kernel and user space + */ + +/* + * FC Transport Message Types + */ + /* kernel -> user */ +#define FC_NL_ASYNC_EVENT 0x0100 + /* user -> kernel */ +/* none */ + + +/* + * Message Structures : + */ + +/* macro to round up message lengths to 8byte boundary */ +#define FC_NL_MSGALIGN(len) (((len) + 7) & ~7) + + +/* + * FC Transport Broadcast Event Message : + * FC_NL_ASYNC_EVENT + * + * Note: if Vendor Unique message, &event_data will be start of + * vendor unique payload, and the length of the payload is + * per event_datalen + * + * Note: When specifying vendor_id, be sure to read the Vendor Type and ID + * formatting requirements specified in scsi_netlink.h + */ +struct fc_nl_event { + struct scsi_nl_hdr snlh; /* must be 1st element ! */ + uint64_t seconds; + uint64_t vendor_id; + uint16_t host_no; + uint16_t event_datalen; + uint32_t event_num; + uint32_t event_code; + uint32_t event_data; +} __attribute__((aligned(sizeof(uint64_t)))); + + +#endif /* SCSI_NETLINK_FC_H */ + -- cgit v1.3-14-g43fede From b889fcf63cb62e7fdb7816565e28f44dbe4a76a5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 20 Dec 2012 17:14:26 +0000 Subject: UAPI: (Scripted) Disintegrate include/video Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/uapi/video/Kbuild | 3 + include/uapi/video/edid.h | 9 ++ include/uapi/video/sisfb.h | 209 +++++++++++++++++++++++++++++++++++++++++++ include/uapi/video/uvesafb.h | 60 +++++++++++++ include/video/Kbuild | 3 - include/video/edid.h | 7 +- include/video/sisfb.h | 189 +------------------------------------- include/video/uvesafb.h | 58 +----------- 8 files changed, 284 insertions(+), 254 deletions(-) create mode 100644 include/uapi/video/edid.h create mode 100644 include/uapi/video/sisfb.h create mode 100644 include/uapi/video/uvesafb.h (limited to 'include/uapi') diff --git a/include/uapi/video/Kbuild b/include/uapi/video/Kbuild index aafaa5aa54d4..ac7203bb32cc 100644 --- a/include/uapi/video/Kbuild +++ b/include/uapi/video/Kbuild @@ -1 +1,4 @@ # UAPI Header export list +header-y += edid.h +header-y += sisfb.h +header-y += uvesafb.h diff --git a/include/uapi/video/edid.h b/include/uapi/video/edid.h new file mode 100644 index 000000000000..8c0f032014c9 --- /dev/null +++ b/include/uapi/video/edid.h @@ -0,0 +1,9 @@ +#ifndef _UAPI__linux_video_edid_h__ +#define _UAPI__linux_video_edid_h__ + +struct edid_info { + unsigned char dummy[128]; +}; + + +#endif /* _UAPI__linux_video_edid_h__ */ diff --git a/include/uapi/video/sisfb.h b/include/uapi/video/sisfb.h new file mode 100644 index 000000000000..9250b22b10f8 --- /dev/null +++ b/include/uapi/video/sisfb.h @@ -0,0 +1,209 @@ +/* + * sisfb.h - definitions for the SiS framebuffer driver + * + * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the named License, + * or any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + */ + +#ifndef _UAPI_LINUX_SISFB_H_ +#define _UAPI_LINUX_SISFB_H_ + +#include +#include + +/**********************************************/ +/* PUBLIC */ +/**********************************************/ + +/* vbflags, public (others in sis.h) */ +#define CRT2_DEFAULT 0x00000001 +#define CRT2_LCD 0x00000002 +#define CRT2_TV 0x00000004 +#define CRT2_VGA 0x00000008 +#define TV_NTSC 0x00000010 +#define TV_PAL 0x00000020 +#define TV_HIVISION 0x00000040 +#define TV_YPBPR 0x00000080 +#define TV_AVIDEO 0x00000100 +#define TV_SVIDEO 0x00000200 +#define TV_SCART 0x00000400 +#define TV_PALM 0x00001000 +#define TV_PALN 0x00002000 +#define TV_NTSCJ 0x00001000 +#define TV_CHSCART 0x00008000 +#define TV_CHYPBPR525I 0x00010000 +#define CRT1_VGA 0x00000000 +#define CRT1_LCDA 0x00020000 +#define VGA2_CONNECTED 0x00040000 +#define VB_DISPTYPE_CRT1 0x00080000 /* CRT1 connected and used */ +#define VB_SINGLE_MODE 0x20000000 /* CRT1 or CRT2; determined by DISPTYPE_CRTx */ +#define VB_MIRROR_MODE 0x40000000 /* CRT1 + CRT2 identical (mirror mode) */ +#define VB_DUALVIEW_MODE 0x80000000 /* CRT1 + CRT2 independent (dual head mode) */ + +/* Aliases: */ +#define CRT2_ENABLE (CRT2_LCD | CRT2_TV | CRT2_VGA) +#define TV_STANDARD (TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ) +#define TV_INTERFACE (TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I) + +/* Only if TV_YPBPR is set: */ +#define TV_YPBPR525I TV_NTSC +#define TV_YPBPR525P TV_PAL +#define TV_YPBPR750P TV_PALM +#define TV_YPBPR1080I TV_PALN +#define TV_YPBPRALL (TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I) + +#define VB_DISPTYPE_DISP2 CRT2_ENABLE +#define VB_DISPTYPE_CRT2 CRT2_ENABLE +#define VB_DISPTYPE_DISP1 VB_DISPTYPE_CRT1 +#define VB_DISPMODE_SINGLE VB_SINGLE_MODE +#define VB_DISPMODE_MIRROR VB_MIRROR_MODE +#define VB_DISPMODE_DUAL VB_DUALVIEW_MODE +#define VB_DISPLAY_MODE (SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE) + +/* Structure argument for SISFB_GET_INFO ioctl */ +struct sisfb_info { + __u32 sisfb_id; /* for identifying sisfb */ +#ifndef SISFB_ID +#define SISFB_ID 0x53495346 /* Identify myself with 'SISF' */ +#endif + __u32 chip_id; /* PCI-ID of detected chip */ + __u32 memory; /* total video memory in KB */ + __u32 heapstart; /* heap start offset in KB */ + __u8 fbvidmode; /* current sisfb mode */ + + __u8 sisfb_version; + __u8 sisfb_revision; + __u8 sisfb_patchlevel; + + __u8 sisfb_caps; /* sisfb capabilities */ + + __u32 sisfb_tqlen; /* turbo queue length (in KB) */ + + __u32 sisfb_pcibus; /* The card's PCI ID */ + __u32 sisfb_pcislot; + __u32 sisfb_pcifunc; + + __u8 sisfb_lcdpdc; /* PanelDelayCompensation */ + + __u8 sisfb_lcda; /* Detected status of LCDA for low res/text modes */ + + __u32 sisfb_vbflags; + __u32 sisfb_currentvbflags; + + __u32 sisfb_scalelcd; + __u32 sisfb_specialtiming; + + __u8 sisfb_haveemi; + __u8 sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33; + __u8 sisfb_haveemilcd; + + __u8 sisfb_lcdpdca; /* PanelDelayCompensation for LCD-via-CRT1 */ + + __u16 sisfb_tvxpos, sisfb_tvypos; /* Warning: Values + 32 ! */ + + __u32 sisfb_heapsize; /* heap size (in KB) */ + __u32 sisfb_videooffset; /* Offset of viewport in video memory (in bytes) */ + + __u32 sisfb_curfstn; /* currently running FSTN/DSTN mode */ + __u32 sisfb_curdstn; + + __u16 sisfb_pci_vendor; /* PCI vendor (SiS or XGI) */ + + __u32 sisfb_vbflags2; /* ivideo->vbflags2 */ + + __u8 sisfb_can_post; /* sisfb can POST this card */ + __u8 sisfb_card_posted; /* card is POSTED */ + __u8 sisfb_was_boot_device; /* This card was the boot video device (ie is primary) */ + + __u8 reserved[183]; /* for future use */ +}; + +#define SISFB_CMD_GETVBFLAGS 0x55AA0001 /* no arg; result[1] = vbflags */ +#define SISFB_CMD_SWITCHCRT1 0x55AA0010 /* arg[0]: 99 = query, 0 = off, 1 = on */ +/* more to come */ + +#define SISFB_CMD_ERR_OK 0x80000000 /* command succeeded */ +#define SISFB_CMD_ERR_LOCKED 0x80000001 /* sisfb is locked */ +#define SISFB_CMD_ERR_EARLY 0x80000002 /* request before sisfb took over gfx system */ +#define SISFB_CMD_ERR_NOVB 0x80000003 /* No video bridge */ +#define SISFB_CMD_ERR_NOCRT2 0x80000004 /* can't change CRT1 status, CRT2 disabled */ +/* more to come */ +#define SISFB_CMD_ERR_UNKNOWN 0x8000ffff /* Unknown command */ +#define SISFB_CMD_ERR_OTHER 0x80010000 /* Other error */ + +/* Argument for SISFB_CMD ioctl */ +struct sisfb_cmd { + __u32 sisfb_cmd; + __u32 sisfb_arg[16]; + __u32 sisfb_result[4]; +}; + +/* Additional IOCTLs for communication sisfb <> X driver */ +/* If changing this, vgatypes.h must also be changed (for X driver) */ + +/* ioctl for identifying and giving some info (esp. memory heap start) */ +#define SISFB_GET_INFO_SIZE _IOR(0xF3,0x00,__u32) +#define SISFB_GET_INFO _IOR(0xF3,0x01,struct sisfb_info) + +/* ioctrl to get current vertical retrace status */ +#define SISFB_GET_VBRSTATUS _IOR(0xF3,0x02,__u32) + +/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ +#define SISFB_GET_AUTOMAXIMIZE _IOR(0xF3,0x03,__u32) +#define SISFB_SET_AUTOMAXIMIZE _IOW(0xF3,0x03,__u32) + +/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/ +#define SISFB_GET_TVPOSOFFSET _IOR(0xF3,0x04,__u32) +#define SISFB_SET_TVPOSOFFSET _IOW(0xF3,0x04,__u32) + +/* ioctl for internal sisfb commands (sisfbctrl) */ +#define SISFB_COMMAND _IOWR(0xF3,0x05,struct sisfb_cmd) + +/* ioctl for locking sisfb (no register access during lock) */ +/* As of now, only used to avoid register access during + * the ioctls listed above. + */ +#define SISFB_SET_LOCK _IOW(0xF3,0x06,__u32) + +/* ioctls 0xF3 up to 0x3F reserved for sisfb */ + +/****************************************************************/ +/* The following are deprecated and should not be used anymore: */ +/****************************************************************/ +/* ioctl for identifying and giving some info (esp. memory heap start) */ +#define SISFB_GET_INFO_OLD _IOR('n',0xF8,__u32) +/* ioctrl to get current vertical retrace status */ +#define SISFB_GET_VBRSTATUS_OLD _IOR('n',0xF9,__u32) +/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ +#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32) +#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32) +/****************************************************************/ +/* End of deprecated ioctl numbers */ +/****************************************************************/ + +/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */ +struct sis_memreq { + __u32 offset; + __u32 size; +}; + +/**********************************************/ +/* PRIVATE */ +/* (for IN-KERNEL usage only) */ +/**********************************************/ + + +#endif /* _UAPI_LINUX_SISFB_H_ */ diff --git a/include/uapi/video/uvesafb.h b/include/uapi/video/uvesafb.h new file mode 100644 index 000000000000..cee063d723ad --- /dev/null +++ b/include/uapi/video/uvesafb.h @@ -0,0 +1,60 @@ +#ifndef _UAPI_UVESAFB_H +#define _UAPI_UVESAFB_H + +#include + +struct v86_regs { + __u32 ebx; + __u32 ecx; + __u32 edx; + __u32 esi; + __u32 edi; + __u32 ebp; + __u32 eax; + __u32 eip; + __u32 eflags; + __u32 esp; + __u16 cs; + __u16 ss; + __u16 es; + __u16 ds; + __u16 fs; + __u16 gs; +}; + +/* Task flags */ +#define TF_VBEIB 0x01 +#define TF_BUF_ESDI 0x02 +#define TF_BUF_ESBX 0x04 +#define TF_BUF_RET 0x08 +#define TF_EXIT 0x10 + +struct uvesafb_task { + __u8 flags; + int buf_len; + struct v86_regs regs; +}; + +/* Constants for the capabilities field + * in vbe_ib */ +#define VBE_CAP_CAN_SWITCH_DAC 0x01 +#define VBE_CAP_VGACOMPAT 0x02 + +/* The VBE Info Block */ +struct vbe_ib { + char vbe_signature[4]; + __u16 vbe_version; + __u32 oem_string_ptr; + __u32 capabilities; + __u32 mode_list_ptr; + __u16 total_memory; + __u16 oem_software_rev; + __u32 oem_vendor_name_ptr; + __u32 oem_product_name_ptr; + __u32 oem_product_rev_ptr; + __u8 reserved[222]; + char oem_data[256]; + char misc_data[512]; +} __attribute__ ((packed)); + +#endif /* _UAPI_UVESAFB_H */ diff --git a/include/video/Kbuild b/include/video/Kbuild index ad3e622c5339..e69de29bb2d1 100644 --- a/include/video/Kbuild +++ b/include/video/Kbuild @@ -1,3 +0,0 @@ -header-y += edid.h -header-y += sisfb.h -header-y += uvesafb.h diff --git a/include/video/edid.h b/include/video/edid.h index c5f198704912..0cb8b2a92b75 100644 --- a/include/video/edid.h +++ b/include/video/edid.h @@ -1,14 +1,9 @@ #ifndef __linux_video_edid_h__ #define __linux_video_edid_h__ -struct edid_info { - unsigned char dummy[128]; -}; +#include -#ifdef __KERNEL__ #ifdef CONFIG_X86 extern struct edid_info edid_info; #endif -#endif - #endif /* __linux_video_edid_h__ */ diff --git a/include/video/sisfb.h b/include/video/sisfb.h index 6dc5df9e43f3..6ddff93108fb 100644 --- a/include/video/sisfb.h +++ b/include/video/sisfb.h @@ -17,197 +17,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA */ - #ifndef _LINUX_SISFB_H_ #define _LINUX_SISFB_H_ -#include -#include - -/**********************************************/ -/* PUBLIC */ -/**********************************************/ - -/* vbflags, public (others in sis.h) */ -#define CRT2_DEFAULT 0x00000001 -#define CRT2_LCD 0x00000002 -#define CRT2_TV 0x00000004 -#define CRT2_VGA 0x00000008 -#define TV_NTSC 0x00000010 -#define TV_PAL 0x00000020 -#define TV_HIVISION 0x00000040 -#define TV_YPBPR 0x00000080 -#define TV_AVIDEO 0x00000100 -#define TV_SVIDEO 0x00000200 -#define TV_SCART 0x00000400 -#define TV_PALM 0x00001000 -#define TV_PALN 0x00002000 -#define TV_NTSCJ 0x00001000 -#define TV_CHSCART 0x00008000 -#define TV_CHYPBPR525I 0x00010000 -#define CRT1_VGA 0x00000000 -#define CRT1_LCDA 0x00020000 -#define VGA2_CONNECTED 0x00040000 -#define VB_DISPTYPE_CRT1 0x00080000 /* CRT1 connected and used */ -#define VB_SINGLE_MODE 0x20000000 /* CRT1 or CRT2; determined by DISPTYPE_CRTx */ -#define VB_MIRROR_MODE 0x40000000 /* CRT1 + CRT2 identical (mirror mode) */ -#define VB_DUALVIEW_MODE 0x80000000 /* CRT1 + CRT2 independent (dual head mode) */ - -/* Aliases: */ -#define CRT2_ENABLE (CRT2_LCD | CRT2_TV | CRT2_VGA) -#define TV_STANDARD (TV_NTSC | TV_PAL | TV_PALM | TV_PALN | TV_NTSCJ) -#define TV_INTERFACE (TV_AVIDEO|TV_SVIDEO|TV_SCART|TV_HIVISION|TV_YPBPR|TV_CHSCART|TV_CHYPBPR525I) - -/* Only if TV_YPBPR is set: */ -#define TV_YPBPR525I TV_NTSC -#define TV_YPBPR525P TV_PAL -#define TV_YPBPR750P TV_PALM -#define TV_YPBPR1080I TV_PALN -#define TV_YPBPRALL (TV_YPBPR525I | TV_YPBPR525P | TV_YPBPR750P | TV_YPBPR1080I) - -#define VB_DISPTYPE_DISP2 CRT2_ENABLE -#define VB_DISPTYPE_CRT2 CRT2_ENABLE -#define VB_DISPTYPE_DISP1 VB_DISPTYPE_CRT1 -#define VB_DISPMODE_SINGLE VB_SINGLE_MODE -#define VB_DISPMODE_MIRROR VB_MIRROR_MODE -#define VB_DISPMODE_DUAL VB_DUALVIEW_MODE -#define VB_DISPLAY_MODE (SINGLE_MODE | MIRROR_MODE | DUALVIEW_MODE) - -/* Structure argument for SISFB_GET_INFO ioctl */ -struct sisfb_info { - __u32 sisfb_id; /* for identifying sisfb */ -#ifndef SISFB_ID -#define SISFB_ID 0x53495346 /* Identify myself with 'SISF' */ -#endif - __u32 chip_id; /* PCI-ID of detected chip */ - __u32 memory; /* total video memory in KB */ - __u32 heapstart; /* heap start offset in KB */ - __u8 fbvidmode; /* current sisfb mode */ - - __u8 sisfb_version; - __u8 sisfb_revision; - __u8 sisfb_patchlevel; - - __u8 sisfb_caps; /* sisfb capabilities */ - - __u32 sisfb_tqlen; /* turbo queue length (in KB) */ - - __u32 sisfb_pcibus; /* The card's PCI ID */ - __u32 sisfb_pcislot; - __u32 sisfb_pcifunc; - - __u8 sisfb_lcdpdc; /* PanelDelayCompensation */ - - __u8 sisfb_lcda; /* Detected status of LCDA for low res/text modes */ - - __u32 sisfb_vbflags; - __u32 sisfb_currentvbflags; - - __u32 sisfb_scalelcd; - __u32 sisfb_specialtiming; - - __u8 sisfb_haveemi; - __u8 sisfb_emi30,sisfb_emi31,sisfb_emi32,sisfb_emi33; - __u8 sisfb_haveemilcd; - - __u8 sisfb_lcdpdca; /* PanelDelayCompensation for LCD-via-CRT1 */ - - __u16 sisfb_tvxpos, sisfb_tvypos; /* Warning: Values + 32 ! */ - - __u32 sisfb_heapsize; /* heap size (in KB) */ - __u32 sisfb_videooffset; /* Offset of viewport in video memory (in bytes) */ - - __u32 sisfb_curfstn; /* currently running FSTN/DSTN mode */ - __u32 sisfb_curdstn; - - __u16 sisfb_pci_vendor; /* PCI vendor (SiS or XGI) */ - - __u32 sisfb_vbflags2; /* ivideo->vbflags2 */ - - __u8 sisfb_can_post; /* sisfb can POST this card */ - __u8 sisfb_card_posted; /* card is POSTED */ - __u8 sisfb_was_boot_device; /* This card was the boot video device (ie is primary) */ - - __u8 reserved[183]; /* for future use */ -}; - -#define SISFB_CMD_GETVBFLAGS 0x55AA0001 /* no arg; result[1] = vbflags */ -#define SISFB_CMD_SWITCHCRT1 0x55AA0010 /* arg[0]: 99 = query, 0 = off, 1 = on */ -/* more to come */ - -#define SISFB_CMD_ERR_OK 0x80000000 /* command succeeded */ -#define SISFB_CMD_ERR_LOCKED 0x80000001 /* sisfb is locked */ -#define SISFB_CMD_ERR_EARLY 0x80000002 /* request before sisfb took over gfx system */ -#define SISFB_CMD_ERR_NOVB 0x80000003 /* No video bridge */ -#define SISFB_CMD_ERR_NOCRT2 0x80000004 /* can't change CRT1 status, CRT2 disabled */ -/* more to come */ -#define SISFB_CMD_ERR_UNKNOWN 0x8000ffff /* Unknown command */ -#define SISFB_CMD_ERR_OTHER 0x80010000 /* Other error */ - -/* Argument for SISFB_CMD ioctl */ -struct sisfb_cmd { - __u32 sisfb_cmd; - __u32 sisfb_arg[16]; - __u32 sisfb_result[4]; -}; - -/* Additional IOCTLs for communication sisfb <> X driver */ -/* If changing this, vgatypes.h must also be changed (for X driver) */ - -/* ioctl for identifying and giving some info (esp. memory heap start) */ -#define SISFB_GET_INFO_SIZE _IOR(0xF3,0x00,__u32) -#define SISFB_GET_INFO _IOR(0xF3,0x01,struct sisfb_info) - -/* ioctrl to get current vertical retrace status */ -#define SISFB_GET_VBRSTATUS _IOR(0xF3,0x02,__u32) - -/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ -#define SISFB_GET_AUTOMAXIMIZE _IOR(0xF3,0x03,__u32) -#define SISFB_SET_AUTOMAXIMIZE _IOW(0xF3,0x03,__u32) - -/* ioctls to relocate TV output (x=D[31:16], y=D[15:0], + 32)*/ -#define SISFB_GET_TVPOSOFFSET _IOR(0xF3,0x04,__u32) -#define SISFB_SET_TVPOSOFFSET _IOW(0xF3,0x04,__u32) - -/* ioctl for internal sisfb commands (sisfbctrl) */ -#define SISFB_COMMAND _IOWR(0xF3,0x05,struct sisfb_cmd) - -/* ioctl for locking sisfb (no register access during lock) */ -/* As of now, only used to avoid register access during - * the ioctls listed above. - */ -#define SISFB_SET_LOCK _IOW(0xF3,0x06,__u32) - -/* ioctls 0xF3 up to 0x3F reserved for sisfb */ - -/****************************************************************/ -/* The following are deprecated and should not be used anymore: */ -/****************************************************************/ -/* ioctl for identifying and giving some info (esp. memory heap start) */ -#define SISFB_GET_INFO_OLD _IOR('n',0xF8,__u32) -/* ioctrl to get current vertical retrace status */ -#define SISFB_GET_VBRSTATUS_OLD _IOR('n',0xF9,__u32) -/* ioctl to enable/disable panning auto-maximize (like nomax parameter) */ -#define SISFB_GET_AUTOMAXIMIZE_OLD _IOR('n',0xFA,__u32) -#define SISFB_SET_AUTOMAXIMIZE_OLD _IOW('n',0xFA,__u32) -/****************************************************************/ -/* End of deprecated ioctl numbers */ -/****************************************************************/ - -/* For fb memory manager (FBIO_ALLOC, FBIO_FREE) */ -struct sis_memreq { - __u32 offset; - __u32 size; -}; - -/**********************************************/ -/* PRIVATE */ -/* (for IN-KERNEL usage only) */ -/**********************************************/ - -#ifdef __KERNEL__ #include +#include #define UNKNOWN_VGA 0 #define SIS_300_VGA 1 @@ -220,5 +35,3 @@ extern void sis_malloc_new(struct pci_dev *pdev, struct sis_memreq *req); extern void sis_free(u32 base); extern void sis_free_new(struct pci_dev *pdev, u32 base); #endif - -#endif diff --git a/include/video/uvesafb.h b/include/video/uvesafb.h index 0993a220a3e6..1a91850cb961 100644 --- a/include/video/uvesafb.h +++ b/include/video/uvesafb.h @@ -1,63 +1,8 @@ #ifndef _UVESAFB_H #define _UVESAFB_H -#include - -struct v86_regs { - __u32 ebx; - __u32 ecx; - __u32 edx; - __u32 esi; - __u32 edi; - __u32 ebp; - __u32 eax; - __u32 eip; - __u32 eflags; - __u32 esp; - __u16 cs; - __u16 ss; - __u16 es; - __u16 ds; - __u16 fs; - __u16 gs; -}; - -/* Task flags */ -#define TF_VBEIB 0x01 -#define TF_BUF_ESDI 0x02 -#define TF_BUF_ESBX 0x04 -#define TF_BUF_RET 0x08 -#define TF_EXIT 0x10 - -struct uvesafb_task { - __u8 flags; - int buf_len; - struct v86_regs regs; -}; - -/* Constants for the capabilities field - * in vbe_ib */ -#define VBE_CAP_CAN_SWITCH_DAC 0x01 -#define VBE_CAP_VGACOMPAT 0x02 - -/* The VBE Info Block */ -struct vbe_ib { - char vbe_signature[4]; - __u16 vbe_version; - __u32 oem_string_ptr; - __u32 capabilities; - __u32 mode_list_ptr; - __u16 total_memory; - __u16 oem_software_rev; - __u32 oem_vendor_name_ptr; - __u32 oem_product_name_ptr; - __u32 oem_product_rev_ptr; - __u8 reserved[222]; - char oem_data[256]; - char misc_data[512]; -} __attribute__ ((packed)); +#include -#ifdef __KERNEL__ /* VBE CRTC Info Block */ struct vbe_crtc_ib { @@ -191,5 +136,4 @@ struct uvesafb_par { struct vbe_crtc_ib crtc; }; -#endif /* __KERNEL__ */ #endif /* _UVESAFB_H */ -- cgit v1.3-14-g43fede From 1202ecdc24fc88d5b144824f55ec9c8899591caf Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 21 Oct 2012 16:02:47 -0300 Subject: [media] v4l: Define video buffer flags for timestamp types Define video buffer flags for different timestamp types. Everything up to now have used either realtime clock or monotonic clock, without a way to tell which clock the timestamp was taken from. Also document that the clock source of the timestamp in the timestamp field depends on buffer flags. [mchehab@redhat.com: fix a few wrong references to Kernel 3.8 - as this patch is meant for 3.9] Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 12 +++++++ Documentation/DocBook/media/v4l/io.xml | 53 +++++++++++++++++++++++------- Documentation/DocBook/media/v4l/v4l2.xml | 12 ++++++- include/uapi/linux/videodev2.h | 4 +++ 4 files changed, 69 insertions(+), 12 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 3dd9e78815d1..ebd2bfd1ee8e 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2477,6 +2477,18 @@ that used it. It was originally scheduled for removal in 2.6.35. +
+ V4L2 in Linux 3.9 + + + Added timestamp types to + flags field in + v4l2_buffer. See . + + +
+
Relation of V4L2 to other Linux multimedia APIs diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 388a34032653..09e8dcf5e9c4 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -741,17 +741,19 @@ applications when an output stream. struct timeval timestamp - For input streams this is the -system time (as returned by the gettimeofday() -function) when the first data byte was captured. For output streams -the data will not be displayed before this time, secondary to the -nominal frame rate determined by the current video standard in -enqueued order. Applications can for example zero this field to -display frames as soon as possible. The driver stores the time at -which the first data byte was actually sent out in the -timestamp field. This permits -applications to monitor the drift between the video and system -clock. + For input streams this is time when the first data + byte was captured, as returned by the + clock_gettime() function for the relevant + clock id; see V4L2_BUF_FLAG_TIMESTAMP_* in + . For output streams the data + will not be displayed before this time, secondary to the nominal + frame rate determined by the current video standard in enqueued + order. Applications can for example zero this field to display + frames as soon as possible. The driver stores the time at which + the first data byte was actually sent out in the + timestamp field. This permits + applications to monitor the drift between the video and system + clock. &v4l2-timecode; @@ -1114,6 +1116,35 @@ Typically applications shall use this flag for output buffers if the data in this buffer has not been created by the CPU but by some DMA-capable unit, in which case caches have not been used. + + V4L2_BUF_FLAG_TIMESTAMP_MASK + 0xe000 + Mask for timestamp types below. To test the + timestamp type, mask out bits not belonging to timestamp + type by performing a logical and operation with buffer + flags and timestamp mask. + + + V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN + 0x0000 + Unknown timestamp type. This type is used by + drivers before Linux 3.9 and may be either monotonic (see + below) or realtime (wall clock). Monotonic clock has been + favoured in embedded systems whereas most of the drivers + use the realtime clock. Either kinds of timestamps are + available in user space via + clock_gettime(2) using clock IDs + CLOCK_MONOTONIC and + CLOCK_REALTIME, respectively. + + + V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC + 0x2000 + The buffer timestamp has been taken from the + CLOCK_MONOTONIC clock. To access the + same clock outside V4L2, use + clock_gettime(2) . + diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 4d110b1ad3e9..8fe29427c8e4 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -139,6 +139,16 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.xml), along with the possible impact on existing drivers and applications. --> + + 3.9 + 2012-12-03 + sa + Added timestamp types to + v4l2_buffer, see . + + + 3.6 2012-07-02 @@ -472,7 +482,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.6 + Revision 3.9 &sub-common; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 39d2cecdf38c..94cbe26e9f00 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -701,6 +701,10 @@ struct v4l2_buffer { /* Cache handling flags */ #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 #define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +/* Timestamp type */ +#define V4L2_BUF_FLAG_TIMESTAMP_MASK 0xe000 +#define V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN 0x0000 +#define V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC 0x2000 /** * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor -- cgit v1.3-14-g43fede From b01189b85b7653a51ebe851fc4d70702cebfed3c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 28 Nov 2012 14:40:32 -0300 Subject: [media] V4L: DocBook: Add V4L2_MBUS_FMT_YUV10_1X30 media bus pixel code This patch adds definition of media bus code for YUV pixel format transferred in 30-bit samples where each component has 10 bits width. [mchehab@redhat.com: fix a merge conflict at v4l2-mediabus.h] Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/subdev-formats.xml | 716 ++++++--------------- Documentation/DocBook/media_api.tmpl | 1 + include/uapi/linux/v4l2-mediabus.h | 3 +- 3 files changed, 195 insertions(+), 525 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index 6f341d1eca1a..cc51372ed5e0 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -973,27 +973,37 @@ - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier @@ -1005,6 +1015,16 @@ Bit + 29 + 28 + 27 + 26 + 25 + 24 + 23 + 22 + 21 + 10 19 18 17 @@ -1032,16 +1052,8 @@ V4L2_MBUS_FMT_Y8_1X8 0x2001 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1107,16 +1119,8 @@ V4L2_MBUS_FMT_UYVY8_1_5X8 0x2002 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1132,16 +1136,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1157,16 +1153,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1182,16 +1170,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1207,16 +1187,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1232,16 +1204,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1257,16 +1221,8 @@ V4L2_MBUS_FMT_VYUY8_1_5X8 0x2003 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1282,16 +1238,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1307,16 +1255,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1332,16 +1272,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1357,16 +1289,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1382,16 +1306,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1407,16 +1323,8 @@ V4L2_MBUS_FMT_YUYV8_1_5X8 0x2004 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1432,16 +1340,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1457,16 +1357,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1482,16 +1374,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1507,16 +1391,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1532,16 +1408,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1557,16 +1425,8 @@ V4L2_MBUS_FMT_YVYU8_1_5X8 0x2005 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1582,16 +1442,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1607,16 +1459,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1632,16 +1476,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1657,16 +1493,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1682,16 +1510,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1707,16 +1527,8 @@ V4L2_MBUS_FMT_UYVY8_2X8 0x2006 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1732,16 +1544,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1754,19 +1558,11 @@ y0 - - - - - - - - - - - - - - - - - - - - - - - + + + + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1782,16 +1578,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1807,16 +1595,8 @@ V4L2_MBUS_FMT_VYUY8_2X8 0x2007 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -1832,16 +1612,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1857,16 +1629,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1882,16 +1646,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1907,16 +1663,8 @@ V4L2_MBUS_FMT_YUYV8_2X8 0x2008 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1932,16 +1680,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -1957,16 +1697,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -1982,16 +1714,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -2007,16 +1731,8 @@ V4L2_MBUS_FMT_YVYU8_2X8 0x2009 - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -2032,16 +1748,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - v7 @@ -2057,16 +1765,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - y7 @@ -2082,16 +1782,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; - - u7 @@ -2107,16 +1799,8 @@ V4L2_MBUS_FMT_Y10_1X10 0x200a - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; y9 y8 y7 @@ -2132,16 +1816,8 @@ V4L2_MBUS_FMT_YUYV10_2X10 0x200b - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; y9 y8 y7 @@ -2157,16 +1833,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; u9 u8 u7 @@ -2182,16 +1850,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; y9 y8 y7 @@ -2207,16 +1867,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; v9 v8 v7 @@ -2232,16 +1884,8 @@ V4L2_MBUS_FMT_YVYU10_2X10 0x200c - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; y9 y8 y7 @@ -2257,16 +1901,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; v9 v8 v7 @@ -2282,16 +1918,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; y9 y8 y7 @@ -2307,16 +1935,8 @@ - - - - - - - - - - - - - - - - - - - - + &dash-ent-10; + &dash-ent-10; u9 u8 u7 @@ -2332,6 +1952,7 @@ V4L2_MBUS_FMT_Y12_1X12 0x2013 + &dash-ent-10; - - - @@ -2357,6 +1978,7 @@ V4L2_MBUS_FMT_UYVY8_1X16 0x200f + &dash-ent-10; - - - @@ -2382,6 +2004,7 @@ + &dash-ent-10; - - - @@ -2407,6 +2030,7 @@ V4L2_MBUS_FMT_VYUY8_1X16 0x2010 + &dash-ent-10; - - - @@ -2432,6 +2056,7 @@ + &dash-ent-10; - - - @@ -2457,6 +2082,7 @@ V4L2_MBUS_FMT_YUYV8_1X16 0x2011 + &dash-ent-10; - - - @@ -2482,6 +2108,7 @@ + &dash-ent-10; - - - @@ -2507,6 +2134,7 @@ V4L2_MBUS_FMT_YVYU8_1X16 0x2012 + &dash-ent-10; - - - @@ -2532,6 +2160,7 @@ + &dash-ent-10; - - - @@ -2657,6 +2286,7 @@ V4L2_MBUS_FMT_YUYV10_1X20 0x200d + &dash-ent-10; y9 y8 y7 @@ -2682,6 +2312,7 @@ + &dash-ent-10; y9 y8 y7 @@ -2707,6 +2338,7 @@ V4L2_MBUS_FMT_YVYU10_1X20 0x200e + &dash-ent-10; y9 y8 y7 @@ -2732,6 +2364,32 @@ + &dash-ent-10; + y9 + y8 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + u9 + u8 + u7 + u6 + u5 + u4 + u3 + u2 + u1 + u0 + + + V4L2_MBUS_FMT_YUV10_1X30 + 0x2014 + y9 y8 y7 @@ -2752,6 +2410,16 @@ u2 u1 u0 + v9 + v8 + v7 + v6 + v5 + v4 + v3 + v2 + v1 + v0 diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index f2413acfe241..1f6593deb995 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -22,6 +22,7 @@ http://linuxtv.org/repo/"> +----------"> ]> diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h index e860f55820ec..b9b7bea04537 100644 --- a/include/uapi/linux/v4l2-mediabus.h +++ b/include/uapi/linux/v4l2-mediabus.h @@ -47,7 +47,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2016 */ + /* YUV (including grey) - next is 0x2017 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, V4L2_MBUS_FMT_UV8_1X8 = 0x2015, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, @@ -69,6 +69,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YDYUYDYV8_1X16 = 0x2014, V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, + V4L2_MBUS_FMT_YUV10_1X30 = 0x2016, /* Bayer - next is 0x3019 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, -- cgit v1.3-14-g43fede From 24b9f50170f55a3179c6f6d51022eb7d50502d05 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 3 Jan 2013 12:30:30 -0300 Subject: [media] V4L: Remove deprecated image centering controls It has been over 3 years since the V4L2_CID_[HV]CENTER were deprecated. Clean up the DocBook and remove the V4L2_CID_VCENTER_DEPRECATED, V4L2_CID_VCENTER_DEPRECATED control related paragraphs. Remove the V4L2_CID_[HV]CENTER controls definitions from v4l2-controls.h, these controls are not used by any driver in the mainline now. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 23 ----------------------- drivers/media/v4l2-core/v4l2-ctrls.c | 2 -- include/uapi/linux/v4l2-controls.h | 4 ---- 3 files changed, 29 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 7fe5be1d3bbb..9e8f85498678 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -203,29 +203,6 @@ and should not be used in new drivers and applications. boolean Mirror the picture vertically. - - V4L2_CID_HCENTER_DEPRECATED (formerly V4L2_CID_HCENTER) - integer - Horizontal image centering. This control is -deprecated. New drivers and applications should use the Camera class controls -V4L2_CID_PAN_ABSOLUTE, -V4L2_CID_PAN_RELATIVE and -V4L2_CID_PAN_RESET instead. - - - V4L2_CID_VCENTER_DEPRECATED - (formerly V4L2_CID_VCENTER) - integer - Vertical image centering. Centering is intended to -physically adjust cameras. For image cropping see -, for clipping . This -control is deprecated. New drivers and applications should use the -Camera class controls -V4L2_CID_TILT_ABSOLUTE, -V4L2_CID_TILT_RELATIVE and -V4L2_CID_TILT_RESET instead. - V4L2_CID_POWER_LINE_FREQUENCY enum diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index fa02363e7db4..7b486ac3f4d9 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -577,8 +577,6 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_GAIN: return "Gain"; case V4L2_CID_HFLIP: return "Horizontal Flip"; case V4L2_CID_VFLIP: return "Vertical Flip"; - case V4L2_CID_HCENTER: return "Horizontal Center"; - case V4L2_CID_VCENTER: return "Vertical Center"; case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency"; case V4L2_CID_HUE_AUTO: return "Hue, Automatic"; case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature"; diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index f56c945cecd4..4dc0822700fe 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -88,10 +88,6 @@ #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) - #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0, -- cgit v1.3-14-g43fede From d8346b7d9bab37e6cc712ff1622c65ff98bdfef8 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 20 Dec 2012 15:32:08 +0100 Subject: KVM: s390: Support for I/O interrupts. Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf Reviewed-by: Marcelo Tosatti Signed-off-by: Cornelia Huck Signed-off-by: Marcelo Tosatti --- Documentation/virtual/kvm/api.txt | 4 ++ arch/s390/include/asm/kvm_host.h | 2 + arch/s390/kvm/interrupt.c | 103 +++++++++++++++++++++++++++++++++++++- include/uapi/linux/kvm.h | 9 ++++ 4 files changed, 116 insertions(+), 2 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index a4df5535996b..83bd92b52936 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2069,6 +2069,10 @@ KVM_S390_INT_VIRTIO (vm) - virtio external interrupt; external interrupt KVM_S390_INT_SERVICE (vm) - sclp external interrupt; sclp parameter in parm KVM_S390_INT_EMERGENCY (vcpu) - sigp emergency; source cpu in parm KVM_S390_INT_EXTERNAL_CALL (vcpu) - sigp external call; source cpu in parm +KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) - compound value to indicate an + I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel); + I/O interruption parameters in parm (subchannel) and parm64 (intparm, + interruption subclass) Note that the vcpu ioctl is asynchronous to vcpu execution. diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 711c5ab391cf..a8e35c43df78 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -74,6 +74,7 @@ struct kvm_s390_sie_block { __u64 epoch; /* 0x0038 */ __u8 reserved40[4]; /* 0x0040 */ #define LCTL_CR0 0x8000 +#define LCTL_CR6 0x0200 __u16 lctl; /* 0x0044 */ __s16 icpua; /* 0x0046 */ __u32 ictl; /* 0x0048 */ @@ -125,6 +126,7 @@ struct kvm_vcpu_stat { u32 deliver_prefix_signal; u32 deliver_restart_signal; u32 deliver_program_int; + u32 deliver_io_int; u32 exit_wait_state; u32 instruction_stidp; u32 instruction_spx; diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index c30615e605ac..52cdf20906ab 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -21,11 +21,26 @@ #include "gaccess.h" #include "trace-s390.h" +#define IOINT_SCHID_MASK 0x0000ffff +#define IOINT_SSID_MASK 0x00030000 +#define IOINT_CSSID_MASK 0x03fc0000 +#define IOINT_AI_MASK 0x04000000 + +static int is_ioint(u64 type) +{ + return ((type & 0xfffe0000u) != 0xfffe0000u); +} + static int psw_extint_disabled(struct kvm_vcpu *vcpu) { return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_EXT); } +static int psw_ioint_disabled(struct kvm_vcpu *vcpu) +{ + return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_IO); +} + static int psw_interrupts_disabled(struct kvm_vcpu *vcpu) { if ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PER) || @@ -67,7 +82,15 @@ static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu, case KVM_S390_SIGP_SET_PREFIX: case KVM_S390_RESTART: return 1; + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: + if (psw_ioint_disabled(vcpu)) + return 0; + if (vcpu->arch.sie_block->gcr[6] & inti->io.io_int_word) + return 1; + return 0; default: + printk(KERN_WARNING "illegal interrupt type %llx\n", + inti->type); BUG(); } return 0; @@ -116,6 +139,12 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu, case KVM_S390_SIGP_STOP: __set_cpuflag(vcpu, CPUSTAT_STOP_INT); break; + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: + if (psw_ioint_disabled(vcpu)) + __set_cpuflag(vcpu, CPUSTAT_IO_INT); + else + vcpu->arch.sie_block->lctl |= LCTL_CR6; + break; default: BUG(); } @@ -297,6 +326,47 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, exception = 1; break; + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: + { + __u32 param0 = ((__u32)inti->io.subchannel_id << 16) | + inti->io.subchannel_nr; + __u64 param1 = ((__u64)inti->io.io_int_parm << 32) | + inti->io.io_int_word; + VCPU_EVENT(vcpu, 4, "interrupt: I/O %llx", inti->type); + vcpu->stat.deliver_io_int++; + trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, + param0, param1); + rc = put_guest_u16(vcpu, __LC_SUBCHANNEL_ID, + inti->io.subchannel_id); + if (rc == -EFAULT) + exception = 1; + + rc = put_guest_u16(vcpu, __LC_SUBCHANNEL_NR, + inti->io.subchannel_nr); + if (rc == -EFAULT) + exception = 1; + + rc = put_guest_u32(vcpu, __LC_IO_INT_PARM, + inti->io.io_int_parm); + if (rc == -EFAULT) + exception = 1; + + rc = put_guest_u32(vcpu, __LC_IO_INT_WORD, + inti->io.io_int_word); + if (rc == -EFAULT) + exception = 1; + + rc = copy_to_guest(vcpu, __LC_IO_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + if (rc == -EFAULT) + exception = 1; + + rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, + __LC_IO_NEW_PSW, sizeof(psw_t)); + if (rc == -EFAULT) + exception = 1; + break; + } default: BUG(); } @@ -545,7 +615,7 @@ int kvm_s390_inject_vm(struct kvm *kvm, { struct kvm_s390_local_interrupt *li; struct kvm_s390_float_interrupt *fi; - struct kvm_s390_interrupt_info *inti; + struct kvm_s390_interrupt_info *inti, *iter; int sigcpu; inti = kzalloc(sizeof(*inti), GFP_KERNEL); @@ -569,6 +639,22 @@ int kvm_s390_inject_vm(struct kvm *kvm, case KVM_S390_SIGP_STOP: case KVM_S390_INT_EXTERNAL_CALL: case KVM_S390_INT_EMERGENCY: + kfree(inti); + return -EINVAL; + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: + if (s390int->type & IOINT_AI_MASK) + VM_EVENT(kvm, 5, "%s", "inject: I/O (AI)"); + else + VM_EVENT(kvm, 5, "inject: I/O css %x ss %x schid %04x", + s390int->type & IOINT_CSSID_MASK, + s390int->type & IOINT_SSID_MASK, + s390int->type & IOINT_SCHID_MASK); + inti->type = s390int->type; + inti->io.subchannel_id = s390int->parm >> 16; + inti->io.subchannel_nr = s390int->parm & 0x0000ffffu; + inti->io.io_int_parm = s390int->parm64 >> 32; + inti->io.io_int_word = s390int->parm64 & 0x00000000ffffffffull; + break; default: kfree(inti); return -EINVAL; @@ -579,7 +665,19 @@ int kvm_s390_inject_vm(struct kvm *kvm, mutex_lock(&kvm->lock); fi = &kvm->arch.float_int; spin_lock(&fi->lock); - list_add_tail(&inti->list, &fi->list); + if (!is_ioint(inti->type)) + list_add_tail(&inti->list, &fi->list); + else { + /* Keep I/O interrupts sorted in isc order. */ + list_for_each_entry(iter, &fi->list, list) { + if (!is_ioint(iter->type)) + continue; + if (iter->io.io_int_word <= inti->io.io_int_word) + continue; + break; + } + list_add_tail(&inti->list, &iter->list); + } atomic_set(&fi->active, 1); sigcpu = find_first_bit(fi->idle_mask, KVM_MAX_VCPUS); if (sigcpu == KVM_MAX_VCPUS) { @@ -653,6 +751,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, break; case KVM_S390_INT_VIRTIO: case KVM_S390_INT_SERVICE: + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: default: kfree(inti); return -EINVAL; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index e6e5d4b13708..54540bdd3340 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -401,6 +401,15 @@ struct kvm_s390_psw { #define KVM_S390_INT_SERVICE 0xffff2401u #define KVM_S390_INT_EMERGENCY 0xffff1201u #define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u +/* Anything below 0xfffe0000u is taken by INT_IO */ +#define KVM_S390_INT_IO(ai,cssid,ssid,schid) \ + (((schid)) | \ + ((ssid) << 16) | \ + ((cssid) << 18) | \ + ((ai) << 26)) +#define KVM_S390_INT_IO_MIN 0x00000000u +#define KVM_S390_INT_IO_MAX 0xfffdffffu + struct kvm_s390_interrupt { __u32 type; -- cgit v1.3-14-g43fede From 48a3e950f4cee6a345ffbe9baf599f1e9a54c479 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 20 Dec 2012 15:32:09 +0100 Subject: KVM: s390: Add support for machine checks. Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf Reviewed-by: Marcelo Tosatti Signed-off-by: Cornelia Huck Signed-off-by: Marcelo Tosatti --- Documentation/virtual/kvm/api.txt | 4 ++ arch/s390/include/asm/kvm_host.h | 8 +++ arch/s390/kvm/intercept.c | 2 + arch/s390/kvm/interrupt.c | 112 +++++++++++++++++++++++++++++++ arch/s390/kvm/kvm-s390.h | 3 + arch/s390/kvm/priv.c | 135 ++++++++++++++++++++++++++++++++++++++ arch/s390/kvm/trace-s390.h | 6 +- include/uapi/linux/kvm.h | 1 + 8 files changed, 268 insertions(+), 3 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 83bd92b52936..8a0de309932f 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2073,6 +2073,10 @@ KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) - compound value to indicate an I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel); I/O interruption parameters in parm (subchannel) and parm64 (intparm, interruption subclass) +KVM_S390_MCHK (vm, vcpu) - machine check interrupt; cr 14 bits in parm, + machine check interrupt code in parm64 (note that + machine checks needing further payload are not + supported by this ioctl) Note that the vcpu ioctl is asynchronous to vcpu execution. diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index a8e35c43df78..29363d155cd5 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -75,8 +75,10 @@ struct kvm_s390_sie_block { __u8 reserved40[4]; /* 0x0040 */ #define LCTL_CR0 0x8000 #define LCTL_CR6 0x0200 +#define LCTL_CR14 0x0002 __u16 lctl; /* 0x0044 */ __s16 icpua; /* 0x0046 */ +#define ICTL_LPSW 0x00400000 __u32 ictl; /* 0x0048 */ __u32 eca; /* 0x004c */ __u8 icptcode; /* 0x0050 */ @@ -187,6 +189,11 @@ struct kvm_s390_emerg_info { __u16 code; }; +struct kvm_s390_mchk_info { + __u64 cr14; + __u64 mcic; +}; + struct kvm_s390_interrupt_info { struct list_head list; u64 type; @@ -197,6 +204,7 @@ struct kvm_s390_interrupt_info { struct kvm_s390_emerg_info emerg; struct kvm_s390_extcall_info extcall; struct kvm_s390_prefix_info prefix; + struct kvm_s390_mchk_info mchk; }; }; diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index df6c0ad085aa..950c13ecaf60 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -97,10 +97,12 @@ static int handle_lctl(struct kvm_vcpu *vcpu) static const intercept_handler_t instruction_handlers[256] = { [0x01] = kvm_s390_handle_01, + [0x82] = kvm_s390_handle_lpsw, [0x83] = kvm_s390_handle_diag, [0xae] = kvm_s390_handle_sigp, [0xb2] = kvm_s390_handle_b2, [0xb7] = handle_lctl, + [0xb9] = kvm_s390_handle_b9, [0xe5] = kvm_s390_handle_e5, [0xeb] = handle_lctlg, }; diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 52cdf20906ab..b3b4748485ee 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -41,6 +41,11 @@ static int psw_ioint_disabled(struct kvm_vcpu *vcpu) return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_IO); } +static int psw_mchk_disabled(struct kvm_vcpu *vcpu) +{ + return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_MCHECK); +} + static int psw_interrupts_disabled(struct kvm_vcpu *vcpu) { if ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PER) || @@ -82,6 +87,12 @@ static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu, case KVM_S390_SIGP_SET_PREFIX: case KVM_S390_RESTART: return 1; + case KVM_S390_MCHK: + if (psw_mchk_disabled(vcpu)) + return 0; + if (vcpu->arch.sie_block->gcr[14] & inti->mchk.cr14) + return 1; + return 0; case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: if (psw_ioint_disabled(vcpu)) return 0; @@ -116,6 +127,7 @@ static void __reset_intercept_indicators(struct kvm_vcpu *vcpu) CPUSTAT_IO_INT | CPUSTAT_EXT_INT | CPUSTAT_STOP_INT, &vcpu->arch.sie_block->cpuflags); vcpu->arch.sie_block->lctl = 0x0000; + vcpu->arch.sie_block->ictl &= ~ICTL_LPSW; } static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag) @@ -139,6 +151,12 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu, case KVM_S390_SIGP_STOP: __set_cpuflag(vcpu, CPUSTAT_STOP_INT); break; + case KVM_S390_MCHK: + if (psw_mchk_disabled(vcpu)) + vcpu->arch.sie_block->ictl |= ICTL_LPSW; + else + vcpu->arch.sie_block->lctl |= LCTL_CR14; + break; case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: if (psw_ioint_disabled(vcpu)) __set_cpuflag(vcpu, CPUSTAT_IO_INT); @@ -326,6 +344,32 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, exception = 1; break; + case KVM_S390_MCHK: + VCPU_EVENT(vcpu, 4, "interrupt: machine check mcic=%llx", + inti->mchk.mcic); + trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, + inti->mchk.cr14, + inti->mchk.mcic); + rc = kvm_s390_vcpu_store_status(vcpu, + KVM_S390_STORE_STATUS_PREFIXED); + if (rc == -EFAULT) + exception = 1; + + rc = put_guest_u64(vcpu, __LC_MCCK_CODE, inti->mchk.mcic); + if (rc == -EFAULT) + exception = 1; + + rc = copy_to_guest(vcpu, __LC_MCK_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + if (rc == -EFAULT) + exception = 1; + + rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, + __LC_MCK_NEW_PSW, sizeof(psw_t)); + if (rc == -EFAULT) + exception = 1; + break; + case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: { __u32 param0 = ((__u32)inti->io.subchannel_id << 16) | @@ -588,6 +632,61 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) } } +void kvm_s390_deliver_pending_machine_checks(struct kvm_vcpu *vcpu) +{ + struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int; + struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int; + struct kvm_s390_interrupt_info *n, *inti = NULL; + int deliver; + + __reset_intercept_indicators(vcpu); + if (atomic_read(&li->active)) { + do { + deliver = 0; + spin_lock_bh(&li->lock); + list_for_each_entry_safe(inti, n, &li->list, list) { + if ((inti->type == KVM_S390_MCHK) && + __interrupt_is_deliverable(vcpu, inti)) { + list_del(&inti->list); + deliver = 1; + break; + } + __set_intercept_indicator(vcpu, inti); + } + if (list_empty(&li->list)) + atomic_set(&li->active, 0); + spin_unlock_bh(&li->lock); + if (deliver) { + __do_deliver_interrupt(vcpu, inti); + kfree(inti); + } + } while (deliver); + } + + if (atomic_read(&fi->active)) { + do { + deliver = 0; + spin_lock(&fi->lock); + list_for_each_entry_safe(inti, n, &fi->list, list) { + if ((inti->type == KVM_S390_MCHK) && + __interrupt_is_deliverable(vcpu, inti)) { + list_del(&inti->list); + deliver = 1; + break; + } + __set_intercept_indicator(vcpu, inti); + } + if (list_empty(&fi->list)) + atomic_set(&fi->active, 0); + spin_unlock(&fi->lock); + if (deliver) { + __do_deliver_interrupt(vcpu, inti); + kfree(inti); + } + } while (deliver); + } +} + int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code) { struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int; @@ -641,6 +740,13 @@ int kvm_s390_inject_vm(struct kvm *kvm, case KVM_S390_INT_EMERGENCY: kfree(inti); return -EINVAL; + case KVM_S390_MCHK: + VM_EVENT(kvm, 5, "inject: machine check parm64:%llx", + s390int->parm64); + inti->type = s390int->type; + inti->mchk.cr14 = s390int->parm; /* upper bits are not used */ + inti->mchk.mcic = s390int->parm64; + break; case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: if (s390int->type & IOINT_AI_MASK) VM_EVENT(kvm, 5, "%s", "inject: I/O (AI)"); @@ -749,6 +855,12 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, inti->type = s390int->type; inti->emerg.code = s390int->parm; break; + case KVM_S390_MCHK: + VCPU_EVENT(vcpu, 5, "inject: machine check parm64:%llx", + s390int->parm64); + inti->type = s390int->type; + inti->mchk.mcic = s390int->parm64; + break; case KVM_S390_INT_VIRTIO: case KVM_S390_INT_SERVICE: case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index dccc0242b7ca..1f7cc6ccf102 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -106,6 +106,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu); enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer); void kvm_s390_tasklet(unsigned long parm); void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu); +void kvm_s390_deliver_pending_machine_checks(struct kvm_vcpu *vcpu); int kvm_s390_inject_vm(struct kvm *kvm, struct kvm_s390_interrupt *s390int); int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, @@ -117,6 +118,8 @@ int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action); int kvm_s390_handle_b2(struct kvm_vcpu *vcpu); int kvm_s390_handle_e5(struct kvm_vcpu *vcpu); int kvm_s390_handle_01(struct kvm_vcpu *vcpu); +int kvm_s390_handle_b9(struct kvm_vcpu *vcpu); +int kvm_s390_handle_lpsw(struct kvm_vcpu *vcpu); /* implemented in sigp.c */ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu); diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index d715842f56ca..d3cbcd3c9ada 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include "gaccess.h" #include "kvm-s390.h" #include "trace.h" @@ -166,6 +168,99 @@ static int handle_stfl(struct kvm_vcpu *vcpu) return 0; } +static void handle_new_psw(struct kvm_vcpu *vcpu) +{ + /* Check whether the new psw is enabled for machine checks. */ + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_MCHECK) + kvm_s390_deliver_pending_machine_checks(vcpu); +} + +#define PSW_MASK_ADDR_MODE (PSW_MASK_EA | PSW_MASK_BA) +#define PSW_MASK_UNASSIGNED 0xb80800fe7fffffffUL +#define PSW_ADDR_24 0x00000000000fffffUL +#define PSW_ADDR_31 0x000000007fffffffUL + +int kvm_s390_handle_lpsw(struct kvm_vcpu *vcpu) +{ + u64 addr; + psw_compat_t new_psw; + + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) + return kvm_s390_inject_program_int(vcpu, + PGM_PRIVILEGED_OPERATION); + + addr = kvm_s390_get_base_disp_s(vcpu); + + if (addr & 7) { + kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + goto out; + } + + if (copy_from_guest(vcpu, &new_psw, addr, sizeof(new_psw))) { + kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + goto out; + } + + if (!(new_psw.mask & PSW32_MASK_BASE)) { + kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + goto out; + } + + vcpu->arch.sie_block->gpsw.mask = + (new_psw.mask & ~PSW32_MASK_BASE) << 32; + vcpu->arch.sie_block->gpsw.addr = new_psw.addr; + + if ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_UNASSIGNED) || + (!(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_ADDR_MODE) && + (vcpu->arch.sie_block->gpsw.addr & ~PSW_ADDR_24)) || + ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_ADDR_MODE) == + PSW_MASK_EA)) { + kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + goto out; + } + + handle_new_psw(vcpu); +out: + return 0; +} + +static int handle_lpswe(struct kvm_vcpu *vcpu) +{ + u64 addr; + psw_t new_psw; + + addr = kvm_s390_get_base_disp_s(vcpu); + + if (addr & 7) { + kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + goto out; + } + + if (copy_from_guest(vcpu, &new_psw, addr, sizeof(new_psw))) { + kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + goto out; + } + + vcpu->arch.sie_block->gpsw.mask = new_psw.mask; + vcpu->arch.sie_block->gpsw.addr = new_psw.addr; + + if ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_UNASSIGNED) || + (((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_ADDR_MODE) == + PSW_MASK_BA) && + (vcpu->arch.sie_block->gpsw.addr & ~PSW_ADDR_31)) || + (!(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_ADDR_MODE) && + (vcpu->arch.sie_block->gpsw.addr & ~PSW_ADDR_24)) || + ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_ADDR_MODE) == + PSW_MASK_EA)) { + kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + goto out; + } + + handle_new_psw(vcpu); +out: + return 0; +} + static int handle_stidp(struct kvm_vcpu *vcpu) { u64 operand2; @@ -292,6 +387,7 @@ static const intercept_handler_t priv_handlers[256] = { [0x5f] = handle_chsc, [0x7d] = handle_stsi, [0xb1] = handle_stfl, + [0xb2] = handle_lpswe, }; int kvm_s390_handle_b2(struct kvm_vcpu *vcpu) @@ -316,6 +412,45 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; } +static int handle_epsw(struct kvm_vcpu *vcpu) +{ + int reg1, reg2; + + reg1 = (vcpu->arch.sie_block->ipb & 0x00f00000) >> 24; + reg2 = (vcpu->arch.sie_block->ipb & 0x000f0000) >> 16; + + /* This basically extracts the mask half of the psw. */ + vcpu->run->s.regs.gprs[reg1] &= 0xffffffff00000000; + vcpu->run->s.regs.gprs[reg1] |= vcpu->arch.sie_block->gpsw.mask >> 32; + if (reg2) { + vcpu->run->s.regs.gprs[reg2] &= 0xffffffff00000000; + vcpu->run->s.regs.gprs[reg2] |= + vcpu->arch.sie_block->gpsw.mask & 0x00000000ffffffff; + } + return 0; +} + +static const intercept_handler_t b9_handlers[256] = { + [0x8d] = handle_epsw, +}; + +int kvm_s390_handle_b9(struct kvm_vcpu *vcpu) +{ + intercept_handler_t handler; + + /* This is handled just as for the B2 instructions. */ + handler = b9_handlers[vcpu->arch.sie_block->ipa & 0x00ff]; + if (handler) { + if ((handler != handle_epsw) && + (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)) + return kvm_s390_inject_program_int(vcpu, + PGM_PRIVILEGED_OPERATION); + else + return handler(vcpu); + } + return -EOPNOTSUPP; +} + static int handle_tprot(struct kvm_vcpu *vcpu) { u64 address1, address2; diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 90fdf85b5ff7..95fbc1ab88dc 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -141,13 +141,13 @@ TRACE_EVENT(kvm_s390_inject_vcpu, * Trace point for the actual delivery of interrupts. */ TRACE_EVENT(kvm_s390_deliver_interrupt, - TP_PROTO(unsigned int id, __u64 type, __u32 data0, __u64 data1), + TP_PROTO(unsigned int id, __u64 type, __u64 data0, __u64 data1), TP_ARGS(id, type, data0, data1), TP_STRUCT__entry( __field(int, id) __field(__u32, inttype) - __field(__u32, data0) + __field(__u64, data0) __field(__u64, data1) ), @@ -159,7 +159,7 @@ TRACE_EVENT(kvm_s390_deliver_interrupt, ), TP_printk("deliver interrupt (vcpu %d): type:%x (%s) " \ - "data:%08x %016llx", + "data:%08llx %016llx", __entry->id, __entry->inttype, __print_symbolic(__entry->inttype, kvm_s390_int_type), __entry->data0, __entry->data1) diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 54540bdd3340..80bb3b801116 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -397,6 +397,7 @@ struct kvm_s390_psw { #define KVM_S390_PROGRAM_INT 0xfffe0001u #define KVM_S390_SIGP_SET_PREFIX 0xfffe0002u #define KVM_S390_RESTART 0xfffe0003u +#define KVM_S390_MCHK 0xfffe1000u #define KVM_S390_INT_VIRTIO 0xffff2603u #define KVM_S390_INT_SERVICE 0xffff2401u #define KVM_S390_INT_EMERGENCY 0xffff1201u -- cgit v1.3-14-g43fede From fa6b7fe9928d50444c29b29c8563746c6b0c6299 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 20 Dec 2012 15:32:12 +0100 Subject: KVM: s390: Add support for channel I/O instructions. Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti Reviewed-by: Alexander Graf Signed-off-by: Cornelia Huck Signed-off-by: Marcelo Tosatti --- Documentation/virtual/kvm/api.txt | 30 +++++++++++++ arch/s390/include/asm/kvm_host.h | 1 + arch/s390/kvm/intercept.c | 1 + arch/s390/kvm/interrupt.c | 37 ++++++++++++++++ arch/s390/kvm/kvm-s390.c | 12 ++++++ arch/s390/kvm/kvm-s390.h | 2 + arch/s390/kvm/priv.c | 91 +++++++++++++++++++++++++++++++++++++-- arch/s390/kvm/trace-s390.h | 20 +++++++++ include/trace/events/kvm.h | 2 +- include/uapi/linux/kvm.h | 11 +++++ 10 files changed, 202 insertions(+), 5 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 73bd159c5559..f2d6391178b9 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2350,6 +2350,22 @@ The possible hypercalls are defined in the Power Architecture Platform Requirements (PAPR) document available from www.power.org (free developer registration required to access it). + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; + +s390 specific. This exit occurs when KVM_CAP_S390_CSS_SUPPORT has been enabled +and TEST SUBCHANNEL was intercepted. If dequeued is set, a pending I/O +interrupt for the target subchannel has been dequeued and subchannel_id, +subchannel_nr, io_int_parm and io_int_word contain the parameters for that +interrupt. ipb is needed for instruction parameter decoding. + /* Fix the size of the union. */ char padding[256]; }; @@ -2471,3 +2487,17 @@ For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV: where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value. - The tsize field of mas1 shall be set to 4K on TLB0, even though the hardware ignores this value for TLB0. + +6.4 KVM_CAP_S390_CSS_SUPPORT + +Architectures: s390 +Parameters: none +Returns: 0 on success; -1 on error + +This capability enables support for handling of channel I/O instructions. + +TEST PENDING INTERRUPTION and the interrupt portion of TEST SUBCHANNEL are +handled in-kernel, while the other I/O instructions are passed to userspace. + +When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST +SUBCHANNEL intercepts. diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 29363d155cd5..16bd5d169cdb 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -262,6 +262,7 @@ struct kvm_arch{ debug_info_t *dbf; struct kvm_s390_float_interrupt float_int; struct gmap *gmap; + int css_support; }; extern int sie64a(struct kvm_s390_sie_block *, u64 *); diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index 71af87dbb42c..f26ff1e31bdb 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -264,6 +264,7 @@ static const intercept_handler_t intercept_funcs[] = { [0x0C >> 2] = handle_instruction_and_prog, [0x10 >> 2] = handle_noop, [0x14 >> 2] = handle_noop, + [0x18 >> 2] = handle_noop, [0x1C >> 2] = kvm_s390_handle_wait, [0x20 >> 2] = handle_validity, [0x28 >> 2] = handle_stop, diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index b3b4748485ee..9a128357fd15 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -709,6 +709,43 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code) return 0; } +struct kvm_s390_interrupt_info *kvm_s390_get_io_int(struct kvm *kvm, + u64 cr6, u64 schid) +{ + struct kvm_s390_float_interrupt *fi; + struct kvm_s390_interrupt_info *inti, *iter; + + if ((!schid && !cr6) || (schid && cr6)) + return NULL; + mutex_lock(&kvm->lock); + fi = &kvm->arch.float_int; + spin_lock(&fi->lock); + inti = NULL; + list_for_each_entry(iter, &fi->list, list) { + if (!is_ioint(iter->type)) + continue; + if (cr6 && ((cr6 & iter->io.io_int_word) == 0)) + continue; + if (schid) { + if (((schid & 0x00000000ffff0000) >> 16) != + iter->io.subchannel_id) + continue; + if ((schid & 0x000000000000ffff) != + iter->io.subchannel_nr) + continue; + } + inti = iter; + break; + } + if (inti) + list_del_init(&inti->list); + if (list_empty(&fi->list)) + atomic_set(&fi->active, 0); + spin_unlock(&fi->lock); + mutex_unlock(&kvm->lock); + return inti; +} + int kvm_s390_inject_vm(struct kvm *kvm, struct kvm_s390_interrupt *s390int) { diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 5ff26033825c..5b01f0953900 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -141,6 +141,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_SYNC_REGS: case KVM_CAP_ONE_REG: case KVM_CAP_ENABLE_CAP: + case KVM_CAP_S390_CSS_SUPPORT: r = 1; break; case KVM_CAP_NR_VCPUS: @@ -235,6 +236,9 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) if (!kvm->arch.gmap) goto out_nogmap; } + + kvm->arch.css_support = 0; + return 0; out_nogmap: debug_unregister(kvm->arch.dbf); @@ -658,6 +662,7 @@ rerun_vcpu: case KVM_EXIT_INTR: case KVM_EXIT_S390_RESET: case KVM_EXIT_S390_UCONTROL: + case KVM_EXIT_S390_TSCH: break; default: BUG(); @@ -818,6 +823,13 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, return -EINVAL; switch (cap->cap) { + case KVM_CAP_S390_CSS_SUPPORT: + if (!vcpu->kvm->arch.css_support) { + vcpu->kvm->arch.css_support = 1; + trace_kvm_s390_enable_css(vcpu->kvm); + } + r = 0; + break; default: r = -EINVAL; break; diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index 211b340385a7..3e05deff21b6 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -113,6 +113,8 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, struct kvm_s390_interrupt *s390int); int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code); int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action); +struct kvm_s390_interrupt_info *kvm_s390_get_io_int(struct kvm *kvm, + u64 cr6, u64 schid); /* implemented in priv.c */ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu); diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 8ad776f87856..0ef9894606e5 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -127,15 +127,98 @@ static int handle_skey(struct kvm_vcpu *vcpu) return 0; } -static int handle_io_inst(struct kvm_vcpu *vcpu) +static int handle_tpi(struct kvm_vcpu *vcpu) { - VCPU_EVENT(vcpu, 4, "%s", "I/O instruction"); - /* condition code 3 */ + u64 addr; + struct kvm_s390_interrupt_info *inti; + int cc; + + addr = kvm_s390_get_base_disp_s(vcpu); + + inti = kvm_s390_get_io_int(vcpu->kvm, vcpu->run->s.regs.crs[6], 0); + if (inti) { + if (addr) { + /* + * Store the two-word I/O interruption code into the + * provided area. + */ + put_guest_u16(vcpu, addr, inti->io.subchannel_id); + put_guest_u16(vcpu, addr + 2, inti->io.subchannel_nr); + put_guest_u32(vcpu, addr + 4, inti->io.io_int_parm); + } else { + /* + * Store the three-word I/O interruption code into + * the appropriate lowcore area. + */ + put_guest_u16(vcpu, 184, inti->io.subchannel_id); + put_guest_u16(vcpu, 186, inti->io.subchannel_nr); + put_guest_u32(vcpu, 188, inti->io.io_int_parm); + put_guest_u32(vcpu, 192, inti->io.io_int_word); + } + cc = 1; + } else + cc = 0; + kfree(inti); + /* Set condition code and we're done. */ vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44); - vcpu->arch.sie_block->gpsw.mask |= (3 & 3ul) << 44; + vcpu->arch.sie_block->gpsw.mask |= (cc & 3ul) << 44; return 0; } +static int handle_tsch(struct kvm_vcpu *vcpu) +{ + struct kvm_s390_interrupt_info *inti; + + inti = kvm_s390_get_io_int(vcpu->kvm, 0, + vcpu->run->s.regs.gprs[1]); + + /* + * Prepare exit to userspace. + * We indicate whether we dequeued a pending I/O interrupt + * so that userspace can re-inject it if the instruction gets + * a program check. While this may re-order the pending I/O + * interrupts, this is no problem since the priority is kept + * intact. + */ + vcpu->run->exit_reason = KVM_EXIT_S390_TSCH; + vcpu->run->s390_tsch.dequeued = !!inti; + if (inti) { + vcpu->run->s390_tsch.subchannel_id = inti->io.subchannel_id; + vcpu->run->s390_tsch.subchannel_nr = inti->io.subchannel_nr; + vcpu->run->s390_tsch.io_int_parm = inti->io.io_int_parm; + vcpu->run->s390_tsch.io_int_word = inti->io.io_int_word; + } + vcpu->run->s390_tsch.ipb = vcpu->arch.sie_block->ipb; + kfree(inti); + return -EREMOTE; +} + +static int handle_io_inst(struct kvm_vcpu *vcpu) +{ + VCPU_EVENT(vcpu, 4, "%s", "I/O instruction"); + + if (vcpu->kvm->arch.css_support) { + /* + * Most I/O instructions will be handled by userspace. + * Exceptions are tpi and the interrupt portion of tsch. + */ + if (vcpu->arch.sie_block->ipa == 0xb236) + return handle_tpi(vcpu); + if (vcpu->arch.sie_block->ipa == 0xb235) + return handle_tsch(vcpu); + /* Handle in userspace. */ + return -EOPNOTSUPP; + } else { + /* + * Set condition code 3 to stop the guest from issueing channel + * I/O instructions. + */ + vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44); + vcpu->arch.sie_block->gpsw.mask |= (3 & 3ul) << 44; + return 0; + } +} + static int handle_stfl(struct kvm_vcpu *vcpu) { unsigned int facility_list; diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 95fbc1ab88dc..13f30f58a2df 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -204,6 +204,26 @@ TRACE_EVENT(kvm_s390_stop_request, ); +/* + * Trace point for enabling channel I/O instruction support. + */ +TRACE_EVENT(kvm_s390_enable_css, + TP_PROTO(void *kvm), + TP_ARGS(kvm), + + TP_STRUCT__entry( + __field(void *, kvm) + ), + + TP_fast_assign( + __entry->kvm = kvm; + ), + + TP_printk("enabling channel I/O support (kvm @ %p)\n", + __entry->kvm) + ); + + #endif /* _TRACE_KVMS390_H */ /* This part must be outside protection */ diff --git a/include/trace/events/kvm.h b/include/trace/events/kvm.h index 7ef9e759f499..a23f47c884cf 100644 --- a/include/trace/events/kvm.h +++ b/include/trace/events/kvm.h @@ -14,7 +14,7 @@ ERSN(SHUTDOWN), ERSN(FAIL_ENTRY), ERSN(INTR), ERSN(SET_TPR), \ ERSN(TPR_ACCESS), ERSN(S390_SIEIC), ERSN(S390_RESET), ERSN(DCR),\ ERSN(NMI), ERSN(INTERNAL_ERROR), ERSN(OSI), ERSN(PAPR_HCALL), \ - ERSN(S390_UCONTROL) + ERSN(S390_UCONTROL), ERSN(S390_TSCH) TRACE_EVENT(kvm_userspace_exit, TP_PROTO(__u32 reason, int errno), diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 80bb3b801116..8bb0bf83afc5 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -168,6 +168,7 @@ struct kvm_pit_config { #define KVM_EXIT_PAPR_HCALL 19 #define KVM_EXIT_S390_UCONTROL 20 #define KVM_EXIT_WATCHDOG 21 +#define KVM_EXIT_S390_TSCH 22 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -285,6 +286,15 @@ struct kvm_run { __u64 ret; __u64 args[9]; } papr_hcall; + /* KVM_EXIT_S390_TSCH */ + struct { + __u16 subchannel_id; + __u16 subchannel_nr; + __u32 io_int_parm; + __u32 io_int_word; + __u32 ipb; + __u8 dequeued; + } s390_tsch; /* Fix the size of the union. */ char padding[256]; }; @@ -645,6 +655,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_IRQFD_RESAMPLE 82 #define KVM_CAP_PPC_BOOKE_WATCHDOG 83 #define KVM_CAP_PPC_HTAB_FD 84 +#define KVM_CAP_S390_CSS_SUPPORT 85 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.3-14-g43fede From cf02820041668b14cbfa0fbd2bab45ac79bd6174 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 19 Dec 2012 16:07:25 +0000 Subject: UAPI: (Scripted) Disintegrate include/scsi/fc Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/scsi/fc/Kbuild | 4 - include/scsi/fc/fc_els.h | 831 ------------------------------------------ include/scsi/fc/fc_fs.h | 348 ------------------ include/scsi/fc/fc_gs.h | 96 ----- include/scsi/fc/fc_ns.h | 208 ----------- include/uapi/scsi/fc/Kbuild | 4 + include/uapi/scsi/fc/fc_els.h | 831 ++++++++++++++++++++++++++++++++++++++++++ include/uapi/scsi/fc/fc_fs.h | 348 ++++++++++++++++++ include/uapi/scsi/fc/fc_gs.h | 96 +++++ include/uapi/scsi/fc/fc_ns.h | 208 +++++++++++ 10 files changed, 1487 insertions(+), 1487 deletions(-) delete mode 100644 include/scsi/fc/fc_els.h delete mode 100644 include/scsi/fc/fc_fs.h delete mode 100644 include/scsi/fc/fc_gs.h delete mode 100644 include/scsi/fc/fc_ns.h create mode 100644 include/uapi/scsi/fc/fc_els.h create mode 100644 include/uapi/scsi/fc/fc_fs.h create mode 100644 include/uapi/scsi/fc/fc_gs.h create mode 100644 include/uapi/scsi/fc/fc_ns.h (limited to 'include/uapi') diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild index 56603813c6cd..e69de29bb2d1 100644 --- a/include/scsi/fc/Kbuild +++ b/include/scsi/fc/Kbuild @@ -1,4 +0,0 @@ -header-y += fc_els.h -header-y += fc_fs.h -header-y += fc_gs.h -header-y += fc_ns.h diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h deleted file mode 100644 index 481abbd48e39..000000000000 --- a/include/scsi/fc/fc_els.h +++ /dev/null @@ -1,831 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_ELS_H_ -#define _FC_ELS_H_ - -#include - -/* - * Fibre Channel Switch - Enhanced Link Services definitions. - * From T11 FC-LS Rev 1.2 June 7, 2005. - */ - -/* - * ELS Command codes - byte 0 of the frame payload - */ -enum fc_els_cmd { - ELS_LS_RJT = 0x01, /* ESL reject */ - ELS_LS_ACC = 0x02, /* ESL Accept */ - ELS_PLOGI = 0x03, /* N_Port login */ - ELS_FLOGI = 0x04, /* F_Port login */ - ELS_LOGO = 0x05, /* Logout */ - ELS_ABTX = 0x06, /* Abort exchange - obsolete */ - ELS_RCS = 0x07, /* read connection status */ - ELS_RES = 0x08, /* read exchange status block */ - ELS_RSS = 0x09, /* read sequence status block */ - ELS_RSI = 0x0a, /* read sequence initiative */ - ELS_ESTS = 0x0b, /* establish streaming */ - ELS_ESTC = 0x0c, /* estimate credit */ - ELS_ADVC = 0x0d, /* advise credit */ - ELS_RTV = 0x0e, /* read timeout value */ - ELS_RLS = 0x0f, /* read link error status block */ - ELS_ECHO = 0x10, /* echo */ - ELS_TEST = 0x11, /* test */ - ELS_RRQ = 0x12, /* reinstate recovery qualifier */ - ELS_REC = 0x13, /* read exchange concise */ - ELS_SRR = 0x14, /* sequence retransmission request */ - ELS_PRLI = 0x20, /* process login */ - ELS_PRLO = 0x21, /* process logout */ - ELS_SCN = 0x22, /* state change notification */ - ELS_TPLS = 0x23, /* test process login state */ - ELS_TPRLO = 0x24, /* third party process logout */ - ELS_LCLM = 0x25, /* login control list mgmt (obs) */ - ELS_GAID = 0x30, /* get alias_ID */ - ELS_FACT = 0x31, /* fabric activate alias_id */ - ELS_FDACDT = 0x32, /* fabric deactivate alias_id */ - ELS_NACT = 0x33, /* N-port activate alias_id */ - ELS_NDACT = 0x34, /* N-port deactivate alias_id */ - ELS_QOSR = 0x40, /* quality of service request */ - ELS_RVCS = 0x41, /* read virtual circuit status */ - ELS_PDISC = 0x50, /* discover N_port service params */ - ELS_FDISC = 0x51, /* discover F_port service params */ - ELS_ADISC = 0x52, /* discover address */ - ELS_RNC = 0x53, /* report node cap (obs) */ - ELS_FARP_REQ = 0x54, /* FC ARP request */ - ELS_FARP_REPL = 0x55, /* FC ARP reply */ - ELS_RPS = 0x56, /* read port status block */ - ELS_RPL = 0x57, /* read port list */ - ELS_RPBC = 0x58, /* read port buffer condition */ - ELS_FAN = 0x60, /* fabric address notification */ - ELS_RSCN = 0x61, /* registered state change notification */ - ELS_SCR = 0x62, /* state change registration */ - ELS_RNFT = 0x63, /* report node FC-4 types */ - ELS_CSR = 0x68, /* clock synch. request */ - ELS_CSU = 0x69, /* clock synch. update */ - ELS_LINIT = 0x70, /* loop initialize */ - ELS_LSTS = 0x72, /* loop status */ - ELS_RNID = 0x78, /* request node ID data */ - ELS_RLIR = 0x79, /* registered link incident report */ - ELS_LIRR = 0x7a, /* link incident record registration */ - ELS_SRL = 0x7b, /* scan remote loop */ - ELS_SBRP = 0x7c, /* set bit-error reporting params */ - ELS_RPSC = 0x7d, /* report speed capabilities */ - ELS_QSA = 0x7e, /* query security attributes */ - ELS_EVFP = 0x7f, /* exchange virt. fabrics params */ - ELS_LKA = 0x80, /* link keep-alive */ - ELS_AUTH_ELS = 0x90, /* authentication ELS */ -}; - -/* - * Initializer useful for decoding table. - * Please keep this in sync with the above definitions. - */ -#define FC_ELS_CMDS_INIT { \ - [ELS_LS_RJT] = "LS_RJT", \ - [ELS_LS_ACC] = "LS_ACC", \ - [ELS_PLOGI] = "PLOGI", \ - [ELS_FLOGI] = "FLOGI", \ - [ELS_LOGO] = "LOGO", \ - [ELS_ABTX] = "ABTX", \ - [ELS_RCS] = "RCS", \ - [ELS_RES] = "RES", \ - [ELS_RSS] = "RSS", \ - [ELS_RSI] = "RSI", \ - [ELS_ESTS] = "ESTS", \ - [ELS_ESTC] = "ESTC", \ - [ELS_ADVC] = "ADVC", \ - [ELS_RTV] = "RTV", \ - [ELS_RLS] = "RLS", \ - [ELS_ECHO] = "ECHO", \ - [ELS_TEST] = "TEST", \ - [ELS_RRQ] = "RRQ", \ - [ELS_REC] = "REC", \ - [ELS_SRR] = "SRR", \ - [ELS_PRLI] = "PRLI", \ - [ELS_PRLO] = "PRLO", \ - [ELS_SCN] = "SCN", \ - [ELS_TPLS] = "TPLS", \ - [ELS_TPRLO] = "TPRLO", \ - [ELS_LCLM] = "LCLM", \ - [ELS_GAID] = "GAID", \ - [ELS_FACT] = "FACT", \ - [ELS_FDACDT] = "FDACDT", \ - [ELS_NACT] = "NACT", \ - [ELS_NDACT] = "NDACT", \ - [ELS_QOSR] = "QOSR", \ - [ELS_RVCS] = "RVCS", \ - [ELS_PDISC] = "PDISC", \ - [ELS_FDISC] = "FDISC", \ - [ELS_ADISC] = "ADISC", \ - [ELS_RNC] = "RNC", \ - [ELS_FARP_REQ] = "FARP_REQ", \ - [ELS_FARP_REPL] = "FARP_REPL", \ - [ELS_RPS] = "RPS", \ - [ELS_RPL] = "RPL", \ - [ELS_RPBC] = "RPBC", \ - [ELS_FAN] = "FAN", \ - [ELS_RSCN] = "RSCN", \ - [ELS_SCR] = "SCR", \ - [ELS_RNFT] = "RNFT", \ - [ELS_CSR] = "CSR", \ - [ELS_CSU] = "CSU", \ - [ELS_LINIT] = "LINIT", \ - [ELS_LSTS] = "LSTS", \ - [ELS_RNID] = "RNID", \ - [ELS_RLIR] = "RLIR", \ - [ELS_LIRR] = "LIRR", \ - [ELS_SRL] = "SRL", \ - [ELS_SBRP] = "SBRP", \ - [ELS_RPSC] = "RPSC", \ - [ELS_QSA] = "QSA", \ - [ELS_EVFP] = "EVFP", \ - [ELS_LKA] = "LKA", \ - [ELS_AUTH_ELS] = "AUTH_ELS", \ -} - -/* - * LS_ACC payload. - */ -struct fc_els_ls_acc { - __u8 la_cmd; /* command code ELS_LS_ACC */ - __u8 la_resv[3]; /* reserved */ -}; - -/* - * ELS reject payload. - */ -struct fc_els_ls_rjt { - __u8 er_cmd; /* command code ELS_LS_RJT */ - __u8 er_resv[4]; /* reserved must be zero */ - __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */ - __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */ - __u8 er_vendor; /* vendor specific code */ -}; - -/* - * ELS reject reason codes (er_reason). - */ -enum fc_els_rjt_reason { - ELS_RJT_NONE = 0, /* no reject - not to be sent */ - ELS_RJT_INVAL = 0x01, /* invalid ELS command code */ - ELS_RJT_LOGIC = 0x03, /* logical error */ - ELS_RJT_BUSY = 0x05, /* logical busy */ - ELS_RJT_PROT = 0x07, /* protocol error */ - ELS_RJT_UNAB = 0x09, /* unable to perform command request */ - ELS_RJT_UNSUP = 0x0b, /* command not supported */ - ELS_RJT_INPROG = 0x0e, /* command already in progress */ - ELS_RJT_FIP = 0x20, /* FIP error */ - ELS_RJT_VENDOR = 0xff, /* vendor specific error */ -}; - - -/* - * reason code explanation (er_explan). - */ -enum fc_els_rjt_explan { - ELS_EXPL_NONE = 0x00, /* No additional explanation */ - ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */ - ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */ - ELS_EXPL_AH = 0x11, /* invalid association header */ - ELS_EXPL_AH_REQ = 0x13, /* association_header required */ - ELS_EXPL_SID = 0x15, /* invalid originator S_ID */ - ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */ - ELS_EXPL_INPROG = 0x19, /* Request already in progress */ - ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */ - ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */ - ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */ - ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */ - ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */ - ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */ - /* TBD - above definitions incomplete */ -}; - -/* - * Common service parameters (N ports). - */ -struct fc_els_csp { - __u8 sp_hi_ver; /* highest version supported (obs.) */ - __u8 sp_lo_ver; /* highest version supported (obs.) */ - __be16 sp_bb_cred; /* buffer-to-buffer credits */ - __be16 sp_features; /* common feature flags */ - __be16 sp_bb_data; /* b-b state number and data field sz */ - union { - struct { - __be16 _sp_tot_seq; /* total concurrent sequences */ - __be16 _sp_rel_off; /* rel. offset by info cat */ - } sp_plogi; - struct { - __be32 _sp_r_a_tov; /* resource alloc. timeout msec */ - } sp_flogi_acc; - } sp_u; - __be32 sp_e_d_tov; /* error detect timeout value */ -}; -#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq -#define sp_rel_off sp_u.sp_plogi._sp_rel_off -#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov - -#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */ - -/* - * Minimum and maximum values for max data field size in service parameters. - */ -#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD -#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD - -/* - * sp_features - */ -#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */ -#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */ -#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */ -#define FC_SP_FT_RAND 0x4000 /* random relative offset */ -#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */ -#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */ -#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */ -#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */ -#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */ -#define FC_SP_FT_MCAST 0x0200 /* multicast */ -#define FC_SP_FT_BCAST 0x0100 /* broadcast */ -#define FC_SP_FT_HUNT 0x0080 /* hunt group */ -#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */ -#define FC_SP_FT_SEC 0x0020 /* reserved for security */ -#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */ -#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */ -#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */ -#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */ -#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */ - -/* - * Class-specific service parameters. - */ -struct fc_els_cssp { - __be16 cp_class; /* class flags */ - __be16 cp_init; /* initiator flags */ - __be16 cp_recip; /* recipient flags */ - __be16 cp_rdfs; /* receive data field size */ - __be16 cp_con_seq; /* concurrent sequences */ - __be16 cp_ee_cred; /* N-port end-to-end credit */ - __u8 cp_resv1; /* reserved */ - __u8 cp_open_seq; /* open sequences per exchange */ - __u8 _cp_resv2[2]; /* reserved */ -}; - -/* - * cp_class flags. - */ -#define FC_CPC_VALID 0x8000 /* class valid */ -#define FC_CPC_IMIX 0x4000 /* intermix mode */ -#define FC_CPC_SEQ 0x0800 /* sequential delivery */ -#define FC_CPC_CAMP 0x0200 /* camp-on */ -#define FC_CPC_PRI 0x0080 /* priority */ - -/* - * cp_init flags. - * (TBD: not all flags defined here). - */ -#define FC_CPI_CSYN 0x0010 /* clock synch. capable */ - -/* - * cp_recip flags. - */ -#define FC_CPR_CSYN 0x0008 /* clock synch. capable */ - -/* - * NFC_ELS_FLOGI: Fabric login request. - * NFC_ELS_PLOGI: Port login request (same format). - */ -struct fc_els_flogi { - __u8 fl_cmd; /* command */ - __u8 _fl_resvd[3]; /* must be zero */ - struct fc_els_csp fl_csp; /* common service parameters */ - __be64 fl_wwpn; /* port name */ - __be64 fl_wwnn; /* node name */ - struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */ - __u8 fl_vend[16]; /* vendor version level */ -} __attribute__((__packed__)); - -/* - * Process login service parameter page. - */ -struct fc_els_spp { - __u8 spp_type; /* type code or common service params */ - __u8 spp_type_ext; /* type code extension */ - __u8 spp_flags; - __u8 _spp_resvd; - __be32 spp_orig_pa; /* originator process associator */ - __be32 spp_resp_pa; /* responder process associator */ - __be32 spp_params; /* service parameters */ -}; - -/* - * spp_flags. - */ -#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */ -#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */ -#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */ -#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */ - -/* - * SPP response code in spp_flags - lower 4 bits. - */ -enum fc_els_spp_resp { - FC_SPP_RESP_ACK = 1, /* request executed */ - FC_SPP_RESP_RES = 2, /* unable due to lack of resources */ - FC_SPP_RESP_INIT = 3, /* initialization not complete */ - FC_SPP_RESP_NO_PA = 4, /* unknown process associator */ - FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */ - FC_SPP_RESP_COND = 6, /* request completed conditionally */ - FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */ - FC_SPP_RESP_INVL = 8, /* SPP is invalid */ -}; - -/* - * ELS_RRQ - Reinstate Recovery Qualifier - */ -struct fc_els_rrq { - __u8 rrq_cmd; /* command (0x12) */ - __u8 rrq_zero[3]; /* specified as zero - part of cmd */ - __u8 rrq_resvd; /* reserved */ - __u8 rrq_s_id[3]; /* originator FID */ - __be16 rrq_ox_id; /* originator exchange ID */ - __be16 rrq_rx_id; /* responders exchange ID */ -}; - -/* - * ELS_REC - Read exchange concise. - */ -struct fc_els_rec { - __u8 rec_cmd; /* command (0x13) */ - __u8 rec_zero[3]; /* specified as zero - part of cmd */ - __u8 rec_resvd; /* reserved */ - __u8 rec_s_id[3]; /* originator FID */ - __be16 rec_ox_id; /* originator exchange ID */ - __be16 rec_rx_id; /* responders exchange ID */ -}; - -/* - * ELS_REC LS_ACC payload. - */ -struct fc_els_rec_acc { - __u8 reca_cmd; /* accept (0x02) */ - __u8 reca_zero[3]; /* specified as zero - part of cmd */ - __be16 reca_ox_id; /* originator exchange ID */ - __be16 reca_rx_id; /* responders exchange ID */ - __u8 reca_resvd1; /* reserved */ - __u8 reca_ofid[3]; /* originator FID */ - __u8 reca_resvd2; /* reserved */ - __u8 reca_rfid[3]; /* responder FID */ - __be32 reca_fc4value; /* FC4 value */ - __be32 reca_e_stat; /* ESB (exchange status block) status */ -}; - -/* - * ELS_PRLI - Process login request and response. - */ -struct fc_els_prli { - __u8 prli_cmd; /* command */ - __u8 prli_spp_len; /* length of each serv. parm. page */ - __be16 prli_len; /* length of entire payload */ - /* service parameter pages follow */ -}; - -/* - * ELS_PRLO - Process logout request and response. - */ -struct fc_els_prlo { - __u8 prlo_cmd; /* command */ - __u8 prlo_obs; /* obsolete, but shall be set to 10h */ - __be16 prlo_len; /* payload length */ -}; - -/* - * ELS_ADISC payload - */ -struct fc_els_adisc { - __u8 adisc_cmd; - __u8 adisc_resv[3]; - __u8 adisc_resv1; - __u8 adisc_hard_addr[3]; - __be64 adisc_wwpn; - __be64 adisc_wwnn; - __u8 adisc_resv2; - __u8 adisc_port_id[3]; -} __attribute__((__packed__)); - -/* - * ELS_LOGO - process or fabric logout. - */ -struct fc_els_logo { - __u8 fl_cmd; /* command code */ - __u8 fl_zero[3]; /* specified as zero - part of cmd */ - __u8 fl_resvd; /* reserved */ - __u8 fl_n_port_id[3];/* N port ID */ - __be64 fl_n_port_wwn; /* port name */ -}; - -/* - * ELS_RTV - read timeout value. - */ -struct fc_els_rtv { - __u8 rtv_cmd; /* command code 0x0e */ - __u8 rtv_zero[3]; /* specified as zero - part of cmd */ -}; - -/* - * LS_ACC for ELS_RTV - read timeout value. - */ -struct fc_els_rtv_acc { - __u8 rtv_cmd; /* command code 0x02 */ - __u8 rtv_zero[3]; /* specified as zero - part of cmd */ - __be32 rtv_r_a_tov; /* resource allocation timeout value */ - __be32 rtv_e_d_tov; /* error detection timeout value */ - __be32 rtv_toq; /* timeout qualifier (see below) */ -}; - -/* - * rtv_toq bits. - */ -#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */ -#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */ - -/* - * ELS_SCR - state change registration payload. - */ -struct fc_els_scr { - __u8 scr_cmd; /* command code */ - __u8 scr_resv[6]; /* reserved */ - __u8 scr_reg_func; /* registration function (see below) */ -}; - -enum fc_els_scr_func { - ELS_SCRF_FAB = 1, /* fabric-detected registration */ - ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */ - ELS_SCRF_FULL = 3, /* full registration */ - ELS_SCRF_CLEAR = 255, /* remove any current registrations */ -}; - -/* - * ELS_RSCN - registered state change notification payload. - */ -struct fc_els_rscn { - __u8 rscn_cmd; /* RSCN opcode (0x61) */ - __u8 rscn_page_len; /* page length (4) */ - __be16 rscn_plen; /* payload length including this word */ - - /* followed by 4-byte generic affected Port_ID pages */ -}; - -struct fc_els_rscn_page { - __u8 rscn_page_flags; /* event and address format */ - __u8 rscn_fid[3]; /* fabric ID */ -}; - -#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */ -#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */ -#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */ -#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */ - -enum fc_els_rscn_ev_qual { - ELS_EV_QUAL_NONE = 0, /* unspecified */ - ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */ - ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */ - ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */ - ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */ - ELS_EV_QUAL_REM_OBJ = 5, /* removed object */ -}; - -enum fc_els_rscn_addr_fmt { - ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */ - ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */ - ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */ - ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */ -}; - -/* - * ELS_RNID - request Node ID. - */ -struct fc_els_rnid { - __u8 rnid_cmd; /* RNID opcode (0x78) */ - __u8 rnid_resv[3]; /* reserved */ - __u8 rnid_fmt; /* data format */ - __u8 rnid_resv2[3]; /* reserved */ -}; - -/* - * Node Identification Data formats (rnid_fmt) - */ -enum fc_els_rnid_fmt { - ELS_RNIDF_NONE = 0, /* no specific identification data */ - ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */ -}; - -/* - * ELS_RNID response. - */ -struct fc_els_rnid_resp { - __u8 rnid_cmd; /* response code (LS_ACC) */ - __u8 rnid_resv[3]; /* reserved */ - __u8 rnid_fmt; /* data format */ - __u8 rnid_cid_len; /* common ID data length */ - __u8 rnid_resv2; /* reserved */ - __u8 rnid_sid_len; /* specific ID data length */ -}; - -struct fc_els_rnid_cid { - __be64 rnid_wwpn; /* N port name */ - __be64 rnid_wwnn; /* node name */ -}; - -struct fc_els_rnid_gen { - __u8 rnid_vend_id[16]; /* vendor-unique ID */ - __be32 rnid_atype; /* associated type (see below) */ - __be32 rnid_phys_port; /* physical port number */ - __be32 rnid_att_nodes; /* number of attached nodes */ - __u8 rnid_node_mgmt; /* node management (see below) */ - __u8 rnid_ip_ver; /* IP version (see below) */ - __be16 rnid_prot_port; /* UDP / TCP port number */ - __be32 rnid_ip_addr[4]; /* IP address */ - __u8 rnid_resvd[2]; /* reserved */ - __be16 rnid_vend_spec; /* vendor-specific field */ -}; - -enum fc_els_rnid_atype { - ELS_RNIDA_UNK = 0x01, /* unknown */ - ELS_RNIDA_OTHER = 0x02, /* none of the following */ - ELS_RNIDA_HUB = 0x03, - ELS_RNIDA_SWITCH = 0x04, - ELS_RNIDA_GATEWAY = 0x05, - ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */ - ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */ - ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */ - ELS_RNIDA_STORAGE = 0x09, - ELS_RNIDA_HOST = 0x0a, - ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */ - ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */ - ELS_RNIDA_NAS = 0x11, /* NAS server */ - ELS_RNIDA_BRIDGE = 0x12, /* bridge */ - ELS_RNIDA_VIRT = 0x13, /* virtualization device */ - ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */ - ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */ - ELS_RNIDA_MF_SW = 1UL << 30, /* switch */ - ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */ - ELS_RNIDA_MF_ST = 1UL << 28, /* storage */ - ELS_RNIDA_MF_HOST = 1UL << 27, /* host */ - ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */ - ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */ - ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */ - ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */ - ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */ - ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */ -}; - -enum fc_els_rnid_mgmt { - ELS_RNIDM_SNMP = 0, - ELS_RNIDM_TELNET = 1, - ELS_RNIDM_HTTP = 2, - ELS_RNIDM_HTTPS = 3, - ELS_RNIDM_XML = 4, /* HTTP + XML */ -}; - -enum fc_els_rnid_ipver { - ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */ - ELS_RNIDIP_V4 = 1, /* IPv4 */ - ELS_RNIDIP_V6 = 2, /* IPv6 */ -}; - -/* - * ELS RPL - Read Port List. - */ -struct fc_els_rpl { - __u8 rpl_cmd; /* command */ - __u8 rpl_resv[5]; /* reserved - must be zero */ - __be16 rpl_max_size; /* maximum response size or zero */ - __u8 rpl_resv1; /* reserved - must be zero */ - __u8 rpl_index[3]; /* starting index */ -}; - -/* - * Port number block in RPL response. - */ -struct fc_els_pnb { - __be32 pnb_phys_pn; /* physical port number */ - __u8 pnb_resv; /* reserved */ - __u8 pnb_port_id[3]; /* port ID */ - __be64 pnb_wwpn; /* port name */ -}; - -/* - * RPL LS_ACC response. - */ -struct fc_els_rpl_resp { - __u8 rpl_cmd; /* ELS_LS_ACC */ - __u8 rpl_resv1; /* reserved - must be zero */ - __be16 rpl_plen; /* payload length */ - __u8 rpl_resv2; /* reserved - must be zero */ - __u8 rpl_llen[3]; /* list length */ - __u8 rpl_resv3; /* reserved - must be zero */ - __u8 rpl_index[3]; /* starting index */ - struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */ -}; - -/* - * Link Error Status Block. - */ -struct fc_els_lesb { - __be32 lesb_link_fail; /* link failure count */ - __be32 lesb_sync_loss; /* loss of synchronization count */ - __be32 lesb_sig_loss; /* loss of signal count */ - __be32 lesb_prim_err; /* primitive sequence error count */ - __be32 lesb_inv_word; /* invalid transmission word count */ - __be32 lesb_inv_crc; /* invalid CRC count */ -}; - -/* - * ELS RPS - Read Port Status Block request. - */ -struct fc_els_rps { - __u8 rps_cmd; /* command */ - __u8 rps_resv[2]; /* reserved - must be zero */ - __u8 rps_flag; /* flag - see below */ - __be64 rps_port_spec; /* port selection */ -}; - -enum fc_els_rps_flag { - FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */ - FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */ - FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */ -}; - -/* - * ELS RPS LS_ACC response. - */ -struct fc_els_rps_resp { - __u8 rps_cmd; /* command - LS_ACC */ - __u8 rps_resv[2]; /* reserved - must be zero */ - __u8 rps_flag; /* flag - see below */ - __u8 rps_resv2[2]; /* reserved */ - __be16 rps_status; /* port status - see below */ - struct fc_els_lesb rps_lesb; /* link error status block */ -}; - -enum fc_els_rps_resp_flag { - FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */ -}; - -enum fc_els_rps_resp_status { - FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */ - FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */ - FC_ELS_RPS_FAB = 1 << 3, /* fabric present */ - FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */ - FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */ - FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */ -}; - -/* - * ELS LIRR - Link Incident Record Registration request. - */ -struct fc_els_lirr { - __u8 lirr_cmd; /* command */ - __u8 lirr_resv[3]; /* reserved - must be zero */ - __u8 lirr_func; /* registration function */ - __u8 lirr_fmt; /* FC-4 type of RLIR requested */ - __u8 lirr_resv2[2]; /* reserved - must be zero */ -}; - -enum fc_els_lirr_func { - ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */ - ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */ - ELS_LIRR_CLEAR = 0xff /* clear registration */ -}; - -/* - * ELS SRL - Scan Remote Loop request. - */ -struct fc_els_srl { - __u8 srl_cmd; /* command */ - __u8 srl_resv[3]; /* reserved - must be zero */ - __u8 srl_flag; /* flag - see below */ - __u8 srl_flag_param[3]; /* flag parameter */ -}; - -enum fc_els_srl_flag { - FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */ - FC_ELS_SRL_ONE = 0x01, /* scan specified loop */ - FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */ - FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */ -}; - -/* - * ELS RLS - Read Link Error Status Block request. - */ -struct fc_els_rls { - __u8 rls_cmd; /* command */ - __u8 rls_resv[4]; /* reserved - must be zero */ - __u8 rls_port_id[3]; /* port ID */ -}; - -/* - * ELS RLS LS_ACC Response. - */ -struct fc_els_rls_resp { - __u8 rls_cmd; /* ELS_LS_ACC */ - __u8 rls_resv[3]; /* reserved - must be zero */ - struct fc_els_lesb rls_lesb; /* link error status block */ -}; - -/* - * ELS RLIR - Registered Link Incident Report. - * This is followed by the CLIR and the CLID, described below. - */ -struct fc_els_rlir { - __u8 rlir_cmd; /* command */ - __u8 rlir_resv[3]; /* reserved - must be zero */ - __u8 rlir_fmt; /* format (FC4-type if type specific) */ - __u8 rlir_clr_len; /* common link incident record length */ - __u8 rlir_cld_len; /* common link incident desc. length */ - __u8 rlir_slr_len; /* spec. link incident record length */ -}; - -/* - * CLIR - Common Link Incident Record Data. - Sent via RLIR. - */ -struct fc_els_clir { - __be64 clir_wwpn; /* incident port name */ - __be64 clir_wwnn; /* incident port node name */ - __u8 clir_port_type; /* incident port type */ - __u8 clir_port_id[3]; /* incident port ID */ - - __be64 clir_conn_wwpn; /* connected port name */ - __be64 clir_conn_wwnn; /* connected node name */ - __be64 clir_fab_name; /* fabric name */ - __be32 clir_phys_port; /* physical port number */ - __be32 clir_trans_id; /* transaction ID */ - __u8 clir_resv[3]; /* reserved */ - __u8 clir_ts_fmt; /* time stamp format */ - __be64 clir_timestamp; /* time stamp */ -}; - -/* - * CLIR clir_ts_fmt - time stamp format values. - */ -enum fc_els_clir_ts_fmt { - ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */ - ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */ - ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */ -}; - -/* - * Common Link Incident Descriptor - sent via RLIR. - */ -struct fc_els_clid { - __u8 clid_iq; /* incident qualifier flags */ - __u8 clid_ic; /* incident code */ - __be16 clid_epai; /* domain/area of ISL */ -}; - -/* - * CLID incident qualifier flags. - */ -enum fc_els_clid_iq { - ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */ - ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */ - ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */ - ELS_CLID_SEV_INFO = 0x00, /* report is informational */ - ELS_CLID_SEV_INOP = 0x08, /* link not operational */ - ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */ - ELS_CLID_LASER = 0x02, /* subassembly is a laser */ - ELS_CLID_FRU = 0x01, /* format can identify a FRU */ -}; - -/* - * CLID incident code. - */ -enum fc_els_clid_ic { - ELS_CLID_IC_IMPL = 1, /* implicit incident */ - ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */ - ELS_CLID_IC_LOS = 3, /* loss of synch or signal */ - ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */ - ELS_CLID_IC_PST = 5, /* primitive sequence timeout */ - ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */ - ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */ - ELS_CLID_IC_LIP = 8, /* receiving LIP */ -}; - -#endif /* _FC_ELS_H_ */ diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h deleted file mode 100644 index 50f28b143451..000000000000 --- a/include/scsi/fc/fc_fs.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_FS_H_ -#define _FC_FS_H_ - -#include - -/* - * Fibre Channel Framing and Signalling definitions. - * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. - */ - -/* - * Frame header - */ -struct fc_frame_header { - __u8 fh_r_ctl; /* routing control */ - __u8 fh_d_id[3]; /* Destination ID */ - - __u8 fh_cs_ctl; /* class of service control / pri */ - __u8 fh_s_id[3]; /* Source ID */ - - __u8 fh_type; /* see enum fc_fh_type below */ - __u8 fh_f_ctl[3]; /* frame control */ - - __u8 fh_seq_id; /* sequence ID */ - __u8 fh_df_ctl; /* data field control */ - __be16 fh_seq_cnt; /* sequence count */ - - __be16 fh_ox_id; /* originator exchange ID */ - __be16 fh_rx_id; /* responder exchange ID */ - __be32 fh_parm_offset; /* parameter or relative offset */ -}; - -#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ - -#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ -#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ - -#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) -#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) - -/* - * fh_r_ctl - Routing control definitions. - */ - /* - * FC-4 device_data. - */ -enum fc_rctl { - FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ - FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ - FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ - FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ - FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ - FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ - FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ - FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ - -#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ -#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ - - /* - * Extended Link_Data - */ - FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ - FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ - FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ - FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ - /* - * Optional Extended Headers - */ - FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ - FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ - FC_RCTL_ENCH = 0x52, /* encapsulation header */ - /* - * Basic Link Services fh_r_ctl values. - */ - FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ - FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ - FC_RCTL_BA_RMC = 0x82, /* remove connection */ - FC_RCTL_BA_ACC = 0x84, /* basic accept */ - FC_RCTL_BA_RJT = 0x85, /* basic reject */ - FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ - /* - * Link Control Information. - */ - FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ - FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ - FC_RCTL_P_RJT = 0xc2, /* port reject */ - FC_RCTL_F_RJT = 0xc3, /* fabric reject */ - FC_RCTL_P_BSY = 0xc4, /* port busy */ - FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ - FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ - FC_RCTL_LCR = 0xc7, /* link credit reset */ - FC_RCTL_END = 0xc9, /* end */ -}; - /* incomplete list of definitions */ - -/* - * R_CTL names initializer. - * Please keep this matching the above definitions. - */ -#define FC_RCTL_NAMES_INIT { \ - [FC_RCTL_DD_UNCAT] = "uncat", \ - [FC_RCTL_DD_SOL_DATA] = "sol data", \ - [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ - [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ - [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ - [FC_RCTL_DD_DATA_DESC] = "data desc", \ - [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ - [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ - [FC_RCTL_ELS_REQ] = "ELS req", \ - [FC_RCTL_ELS_REP] = "ELS rep", \ - [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ - [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ - [FC_RCTL_BA_NOP] = "BLS NOP", \ - [FC_RCTL_BA_ABTS] = "BLS abort", \ - [FC_RCTL_BA_RMC] = "BLS remove connection", \ - [FC_RCTL_BA_ACC] = "BLS accept", \ - [FC_RCTL_BA_RJT] = "BLS reject", \ - [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ - [FC_RCTL_ACK_1] = "LC ACK_1", \ - [FC_RCTL_ACK_0] = "LC ACK_0", \ - [FC_RCTL_P_RJT] = "LC port reject", \ - [FC_RCTL_F_RJT] = "LC fabric reject", \ - [FC_RCTL_P_BSY] = "LC port busy", \ - [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ - [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ - [FC_RCTL_LCR] = "LC link credit reset", \ - [FC_RCTL_END] = "LC end", \ -} - -/* - * Well-known fabric addresses. - */ -enum fc_well_known_fid { - FC_FID_NONE = 0x000000, /* No destination */ - FC_FID_BCAST = 0xffffff, /* broadcast */ - FC_FID_FLOGI = 0xfffffe, /* fabric login */ - FC_FID_FCTRL = 0xfffffd, /* fabric controller */ - FC_FID_DIR_SERV = 0xfffffc, /* directory server */ - FC_FID_TIME_SERV = 0xfffffb, /* time server */ - FC_FID_MGMT_SERV = 0xfffffa, /* management server */ - FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ - FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ - FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ - FC_FID_CLOCK = 0xfffff6, /* clock synch server */ - FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ -}; - -#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ -#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ - -/* - * Other well-known addresses, outside the above contiguous range. - */ -#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ - -/* - * Fabric ID bytes. - */ -#define FC_FID_DOMAIN 0 -#define FC_FID_PORT 1 -#define FC_FID_LINK 2 - -/* - * fh_type codes - */ -enum fc_fh_type { - FC_TYPE_BLS = 0x00, /* basic link service */ - FC_TYPE_ELS = 0x01, /* extended link service */ - FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ - FC_TYPE_FCP = 0x08, /* SCSI FCP */ - FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ - FC_TYPE_ILS = 0x22, /* internal link service */ -}; - -/* - * FC_TYPE names initializer. - * Please keep this matching the above definitions. - */ -#define FC_TYPE_NAMES_INIT { \ - [FC_TYPE_BLS] = "BLS", \ - [FC_TYPE_ELS] = "ELS", \ - [FC_TYPE_IP] = "IP", \ - [FC_TYPE_FCP] = "FCP", \ - [FC_TYPE_CT] = "CT", \ - [FC_TYPE_ILS] = "ILS", \ -} - -/* - * Exchange IDs. - */ -#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ -#define FC_XID_MIN 0x0 /* supported min exchange ID */ -#define FC_XID_MAX 0xfffe /* supported max exchange ID */ - -/* - * fh_f_ctl - Frame control flags. - */ -#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ -#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ -#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ -#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ -#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ -#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ -#define FC_FC_RES_B17 (1 << 17) /* reserved */ -#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ -#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ -#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ - -#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ -#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ -#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ - -#define FC_FC_RES_B11 (1 << 11) /* reserved */ -#define FC_FC_RES_B10 (1 << 10) /* reserved */ -#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ -#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ -#define FC_FC_CONT_SEQ(i) ((i) << 6) -#define FC_FC_ABT_SEQ(i) ((i) << 4) -#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ -#define FC_FC_RES2 (1 << 2) /* reserved */ -#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ - -/* - * BA_ACC payload. - */ -struct fc_ba_acc { - __u8 ba_seq_id_val; /* SEQ_ID validity */ -#define FC_BA_SEQ_ID_VAL 0x80 - __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ - __u8 ba_resvd[2]; /* reserved */ - __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ - __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ - __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ - __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ -}; - -/* - * BA_RJT: Basic Reject payload. - */ -struct fc_ba_rjt { - __u8 br_resvd; /* reserved */ - __u8 br_reason; /* reason code */ - __u8 br_explan; /* reason explanation */ - __u8 br_vendor; /* vendor unique code */ -}; - -/* - * BA_RJT reason codes. - * From FS-2. - */ -enum fc_ba_rjt_reason { - FC_BA_RJT_NONE = 0, /* in software this means no reject */ - FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ - FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ - FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ - FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ - FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ - FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ -}; - -/* - * BA_RJT reason code explanations. - */ -enum fc_ba_rjt_explan { - FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ - FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ - FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ -}; - -/* - * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. - */ -struct fc_pf_rjt { - __u8 rj_action; /* reserved */ - __u8 rj_reason; /* reason code */ - __u8 rj_resvd; /* reserved */ - __u8 rj_vendor; /* vendor unique code */ -}; - -/* - * P_RJT and F_RJT reject reason codes. - */ -enum fc_pf_rjt_reason { - FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ - FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ - FC_RJT_INVL_SID = 0x02, /* invalid source ID */ - FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ - FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ - FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ - FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ - FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ - FC_RJT_LINK_CTL = 0x08, /* invalid link control */ - FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ - FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ - FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ - FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ - FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ - FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ - FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ - FC_RJT_PARAM = 0x10, /* invalid parameter field */ - FC_RJT_EXCH_ERR = 0x11, /* exchange error */ - FC_RJT_PROTO = 0x12, /* protocol error */ - FC_RJT_LEN = 0x13, /* incorrect length */ - FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ - FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ - FC_RJT_LOGI_REQ = 0x16, /* login required */ - FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ - FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ - FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ - FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ - FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ - FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ - FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ - FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ - FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ - FC_RJT_MCAST_ERR = 0x22, /* multicast error */ - FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ - FC_RJT_PRLI_REQ = 0x24, /* process login required */ - FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ - FC_RJT_VENDOR = 0xff, /* vendor specific reject */ -}; - -/* default timeout values */ - -#define FC_DEF_E_D_TOV 2000UL -#define FC_DEF_R_A_TOV 10000UL - -#endif /* _FC_FS_H_ */ diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h deleted file mode 100644 index a37346d47eb1..000000000000 --- a/include/scsi/fc/fc_gs.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_GS_H_ -#define _FC_GS_H_ - -#include - -/* - * Fibre Channel Services - Common Transport. - * From T11.org FC-GS-2 Rev 5.3 November 1998. - */ - -struct fc_ct_hdr { - __u8 ct_rev; /* revision */ - __u8 ct_in_id[3]; /* N_Port ID of original requestor */ - __u8 ct_fs_type; /* type of fibre channel service */ - __u8 ct_fs_subtype; /* subtype */ - __u8 ct_options; - __u8 _ct_resvd1; - __be16 ct_cmd; /* command / response code */ - __be16 ct_mr_size; /* maximum / residual size */ - __u8 _ct_resvd2; - __u8 ct_reason; /* reject reason */ - __u8 ct_explan; /* reason code explanation */ - __u8 ct_vendor; /* vendor unique data */ -}; - -#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */ - -enum fc_ct_rev { - FC_CT_REV = 1 /* common transport revision */ -}; - -/* - * ct_fs_type values. - */ -enum fc_ct_fs_type { - FC_FST_ALIAS = 0xf8, /* alias service */ - FC_FST_MGMT = 0xfa, /* management service */ - FC_FST_TIME = 0xfb, /* time service */ - FC_FST_DIR = 0xfc, /* directory service */ -}; - -/* - * ct_cmd: Command / response codes - */ -enum fc_ct_cmd { - FC_FS_RJT = 0x8001, /* reject */ - FC_FS_ACC = 0x8002, /* accept */ -}; - -/* - * FS_RJT reason codes. - */ -enum fc_ct_reason { - FC_FS_RJT_CMD = 0x01, /* invalid command code */ - FC_FS_RJT_VER = 0x02, /* invalid version level */ - FC_FS_RJT_LOG = 0x03, /* logical error */ - FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */ - FC_FS_RJT_BSY = 0x05, /* logical busy */ - FC_FS_RJT_PROTO = 0x07, /* protocol error */ - FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */ - FC_FS_RJT_UNSUP = 0x0b, /* command not supported */ -}; - -/* - * FS_RJT reason code explanations. - */ -enum fc_ct_explan { - FC_FS_EXP_NONE = 0x00, /* no additional explanation */ - FC_FS_EXP_PID = 0x01, /* port ID not registered */ - FC_FS_EXP_PNAM = 0x02, /* port name not registered */ - FC_FS_EXP_NNAM = 0x03, /* node name not registered */ - FC_FS_EXP_COS = 0x04, /* class of service not registered */ - FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */ - /* definitions not complete */ -}; - -#endif /* _FC_GS_H_ */ diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h deleted file mode 100644 index f7751d53f1d3..000000000000 --- a/include/scsi/fc/fc_ns.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * Copyright(c) 2007 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - * Maintained at www.Open-FCoE.org - */ - -#ifndef _FC_NS_H_ -#define _FC_NS_H_ - -#include - -/* - * Fibre Channel Services - Name Service (dNS) - * From T11.org FC-GS-2 Rev 5.3 November 1998. - */ - -/* - * Common-transport sub-type for Name Server. - */ -#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */ - -/* - * Name server Requests. - * Note: this is an incomplete list, some unused requests are omitted. - */ -enum fc_ns_req { - FC_NS_GA_NXT = 0x0100, /* get all next */ - FC_NS_GI_A = 0x0101, /* get identifiers - scope */ - FC_NS_GPN_ID = 0x0112, /* get port name by ID */ - FC_NS_GNN_ID = 0x0113, /* get node name by ID */ - FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */ - FC_NS_GID_PN = 0x0121, /* get ID for port name */ - FC_NS_GID_NN = 0x0131, /* get IDs for node name */ - FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */ - FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */ - FC_NS_GID_PT = 0x01a1, /* get IDs by port type */ - FC_NS_RPN_ID = 0x0212, /* reg port name for ID */ - FC_NS_RNN_ID = 0x0213, /* reg node name for ID */ - FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */ - FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */ - FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */ - FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */ -}; - -/* - * Port type values. - */ -enum fc_ns_pt { - FC_NS_UNID_PORT = 0x00, /* unidentified */ - FC_NS_N_PORT = 0x01, /* N port */ - FC_NS_NL_PORT = 0x02, /* NL port */ - FC_NS_FNL_PORT = 0x03, /* F/NL port */ - FC_NS_NX_PORT = 0x7f, /* Nx port */ - FC_NS_F_PORT = 0x81, /* F port */ - FC_NS_FL_PORT = 0x82, /* FL port */ - FC_NS_E_PORT = 0x84, /* E port */ - FC_NS_B_PORT = 0x85, /* B port */ -}; - -/* - * Port type object. - */ -struct fc_ns_pt_obj { - __u8 pt_type; -}; - -/* - * Port ID object - */ -struct fc_ns_fid { - __u8 fp_flags; /* flags for responses only */ - __u8 fp_fid[3]; -}; - -/* - * fp_flags in port ID object, for responses only. - */ -#define FC_NS_FID_LAST 0x80 /* last object */ - -/* - * FC4-types object. - */ -#define FC_NS_TYPES 256 /* number of possible FC-4 types */ -#define FC_NS_BPW 32 /* bits per word in bitmap */ - -struct fc_ns_fts { - __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */ -}; - -/* - * FC4-features object. - */ -struct fc_ns_ff { - __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */ -}; - -/* - * GID_PT request. - */ -struct fc_ns_gid_pt { - __u8 fn_pt_type; - __u8 fn_domain_id_scope; - __u8 fn_area_id_scope; - __u8 fn_resvd; -}; - -/* - * GID_FT or GPN_FT request. - */ -struct fc_ns_gid_ft { - __u8 fn_resvd; - __u8 fn_domain_id_scope; - __u8 fn_area_id_scope; - __u8 fn_fc4_type; -}; - -/* - * GPN_FT response. - */ -struct fc_gpn_ft_resp { - __u8 fp_flags; /* see fp_flags definitions above */ - __u8 fp_fid[3]; /* port ID */ - __be32 fp_resvd; - __be64 fp_wwpn; /* port name */ -}; - -/* - * GID_PN request - */ -struct fc_ns_gid_pn { - __be64 fn_wwpn; /* port name */ -}; - -/* - * GID_PN response or GSPN_ID request - */ -struct fc_gid_pn_resp { - __u8 fp_resvd; - __u8 fp_fid[3]; /* port ID */ -}; - -/* - * GSPN_ID response - */ -struct fc_gspn_resp { - __u8 fp_name_len; - char fp_name[]; -}; - -/* - * RFT_ID request - register FC-4 types for ID. - */ -struct fc_ns_rft_id { - struct fc_ns_fid fr_fid; /* port ID object */ - struct fc_ns_fts fr_fts; /* FC-4 types object */ -}; - -/* - * RPN_ID request - register port name for ID. - * RNN_ID request - register node name for ID. - */ -struct fc_ns_rn_id { - struct fc_ns_fid fr_fid; /* port ID object */ - __be64 fr_wwn; /* node name or port name */ -} __attribute__((__packed__)); - -/* - * RSNN_NN request - register symbolic node name - */ -struct fc_ns_rsnn { - __be64 fr_wwn; /* node name */ - __u8 fr_name_len; - char fr_name[]; -} __attribute__((__packed__)); - -/* - * RSPN_ID request - register symbolic port name - */ -struct fc_ns_rspn { - struct fc_ns_fid fr_fid; /* port ID object */ - __u8 fr_name_len; - char fr_name[]; -} __attribute__((__packed__)); - -/* - * RFF_ID request - register FC-4 Features for ID. - */ -struct fc_ns_rff_id { - struct fc_ns_fid fr_fid; /* port ID object */ - __u8 fr_resvd[2]; - __u8 fr_feat; /* FC-4 Feature bits */ - __u8 fr_type; /* FC-4 type */ -} __attribute__((__packed__)); - -#endif /* _FC_NS_H_ */ diff --git a/include/uapi/scsi/fc/Kbuild b/include/uapi/scsi/fc/Kbuild index aafaa5aa54d4..5ead9fac265c 100644 --- a/include/uapi/scsi/fc/Kbuild +++ b/include/uapi/scsi/fc/Kbuild @@ -1 +1,5 @@ # UAPI Header export list +header-y += fc_els.h +header-y += fc_fs.h +header-y += fc_gs.h +header-y += fc_ns.h diff --git a/include/uapi/scsi/fc/fc_els.h b/include/uapi/scsi/fc/fc_els.h new file mode 100644 index 000000000000..481abbd48e39 --- /dev/null +++ b/include/uapi/scsi/fc/fc_els.h @@ -0,0 +1,831 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_ELS_H_ +#define _FC_ELS_H_ + +#include + +/* + * Fibre Channel Switch - Enhanced Link Services definitions. + * From T11 FC-LS Rev 1.2 June 7, 2005. + */ + +/* + * ELS Command codes - byte 0 of the frame payload + */ +enum fc_els_cmd { + ELS_LS_RJT = 0x01, /* ESL reject */ + ELS_LS_ACC = 0x02, /* ESL Accept */ + ELS_PLOGI = 0x03, /* N_Port login */ + ELS_FLOGI = 0x04, /* F_Port login */ + ELS_LOGO = 0x05, /* Logout */ + ELS_ABTX = 0x06, /* Abort exchange - obsolete */ + ELS_RCS = 0x07, /* read connection status */ + ELS_RES = 0x08, /* read exchange status block */ + ELS_RSS = 0x09, /* read sequence status block */ + ELS_RSI = 0x0a, /* read sequence initiative */ + ELS_ESTS = 0x0b, /* establish streaming */ + ELS_ESTC = 0x0c, /* estimate credit */ + ELS_ADVC = 0x0d, /* advise credit */ + ELS_RTV = 0x0e, /* read timeout value */ + ELS_RLS = 0x0f, /* read link error status block */ + ELS_ECHO = 0x10, /* echo */ + ELS_TEST = 0x11, /* test */ + ELS_RRQ = 0x12, /* reinstate recovery qualifier */ + ELS_REC = 0x13, /* read exchange concise */ + ELS_SRR = 0x14, /* sequence retransmission request */ + ELS_PRLI = 0x20, /* process login */ + ELS_PRLO = 0x21, /* process logout */ + ELS_SCN = 0x22, /* state change notification */ + ELS_TPLS = 0x23, /* test process login state */ + ELS_TPRLO = 0x24, /* third party process logout */ + ELS_LCLM = 0x25, /* login control list mgmt (obs) */ + ELS_GAID = 0x30, /* get alias_ID */ + ELS_FACT = 0x31, /* fabric activate alias_id */ + ELS_FDACDT = 0x32, /* fabric deactivate alias_id */ + ELS_NACT = 0x33, /* N-port activate alias_id */ + ELS_NDACT = 0x34, /* N-port deactivate alias_id */ + ELS_QOSR = 0x40, /* quality of service request */ + ELS_RVCS = 0x41, /* read virtual circuit status */ + ELS_PDISC = 0x50, /* discover N_port service params */ + ELS_FDISC = 0x51, /* discover F_port service params */ + ELS_ADISC = 0x52, /* discover address */ + ELS_RNC = 0x53, /* report node cap (obs) */ + ELS_FARP_REQ = 0x54, /* FC ARP request */ + ELS_FARP_REPL = 0x55, /* FC ARP reply */ + ELS_RPS = 0x56, /* read port status block */ + ELS_RPL = 0x57, /* read port list */ + ELS_RPBC = 0x58, /* read port buffer condition */ + ELS_FAN = 0x60, /* fabric address notification */ + ELS_RSCN = 0x61, /* registered state change notification */ + ELS_SCR = 0x62, /* state change registration */ + ELS_RNFT = 0x63, /* report node FC-4 types */ + ELS_CSR = 0x68, /* clock synch. request */ + ELS_CSU = 0x69, /* clock synch. update */ + ELS_LINIT = 0x70, /* loop initialize */ + ELS_LSTS = 0x72, /* loop status */ + ELS_RNID = 0x78, /* request node ID data */ + ELS_RLIR = 0x79, /* registered link incident report */ + ELS_LIRR = 0x7a, /* link incident record registration */ + ELS_SRL = 0x7b, /* scan remote loop */ + ELS_SBRP = 0x7c, /* set bit-error reporting params */ + ELS_RPSC = 0x7d, /* report speed capabilities */ + ELS_QSA = 0x7e, /* query security attributes */ + ELS_EVFP = 0x7f, /* exchange virt. fabrics params */ + ELS_LKA = 0x80, /* link keep-alive */ + ELS_AUTH_ELS = 0x90, /* authentication ELS */ +}; + +/* + * Initializer useful for decoding table. + * Please keep this in sync with the above definitions. + */ +#define FC_ELS_CMDS_INIT { \ + [ELS_LS_RJT] = "LS_RJT", \ + [ELS_LS_ACC] = "LS_ACC", \ + [ELS_PLOGI] = "PLOGI", \ + [ELS_FLOGI] = "FLOGI", \ + [ELS_LOGO] = "LOGO", \ + [ELS_ABTX] = "ABTX", \ + [ELS_RCS] = "RCS", \ + [ELS_RES] = "RES", \ + [ELS_RSS] = "RSS", \ + [ELS_RSI] = "RSI", \ + [ELS_ESTS] = "ESTS", \ + [ELS_ESTC] = "ESTC", \ + [ELS_ADVC] = "ADVC", \ + [ELS_RTV] = "RTV", \ + [ELS_RLS] = "RLS", \ + [ELS_ECHO] = "ECHO", \ + [ELS_TEST] = "TEST", \ + [ELS_RRQ] = "RRQ", \ + [ELS_REC] = "REC", \ + [ELS_SRR] = "SRR", \ + [ELS_PRLI] = "PRLI", \ + [ELS_PRLO] = "PRLO", \ + [ELS_SCN] = "SCN", \ + [ELS_TPLS] = "TPLS", \ + [ELS_TPRLO] = "TPRLO", \ + [ELS_LCLM] = "LCLM", \ + [ELS_GAID] = "GAID", \ + [ELS_FACT] = "FACT", \ + [ELS_FDACDT] = "FDACDT", \ + [ELS_NACT] = "NACT", \ + [ELS_NDACT] = "NDACT", \ + [ELS_QOSR] = "QOSR", \ + [ELS_RVCS] = "RVCS", \ + [ELS_PDISC] = "PDISC", \ + [ELS_FDISC] = "FDISC", \ + [ELS_ADISC] = "ADISC", \ + [ELS_RNC] = "RNC", \ + [ELS_FARP_REQ] = "FARP_REQ", \ + [ELS_FARP_REPL] = "FARP_REPL", \ + [ELS_RPS] = "RPS", \ + [ELS_RPL] = "RPL", \ + [ELS_RPBC] = "RPBC", \ + [ELS_FAN] = "FAN", \ + [ELS_RSCN] = "RSCN", \ + [ELS_SCR] = "SCR", \ + [ELS_RNFT] = "RNFT", \ + [ELS_CSR] = "CSR", \ + [ELS_CSU] = "CSU", \ + [ELS_LINIT] = "LINIT", \ + [ELS_LSTS] = "LSTS", \ + [ELS_RNID] = "RNID", \ + [ELS_RLIR] = "RLIR", \ + [ELS_LIRR] = "LIRR", \ + [ELS_SRL] = "SRL", \ + [ELS_SBRP] = "SBRP", \ + [ELS_RPSC] = "RPSC", \ + [ELS_QSA] = "QSA", \ + [ELS_EVFP] = "EVFP", \ + [ELS_LKA] = "LKA", \ + [ELS_AUTH_ELS] = "AUTH_ELS", \ +} + +/* + * LS_ACC payload. + */ +struct fc_els_ls_acc { + __u8 la_cmd; /* command code ELS_LS_ACC */ + __u8 la_resv[3]; /* reserved */ +}; + +/* + * ELS reject payload. + */ +struct fc_els_ls_rjt { + __u8 er_cmd; /* command code ELS_LS_RJT */ + __u8 er_resv[4]; /* reserved must be zero */ + __u8 er_reason; /* reason (enum fc_els_rjt_reason below) */ + __u8 er_explan; /* explanation (enum fc_els_rjt_explan below) */ + __u8 er_vendor; /* vendor specific code */ +}; + +/* + * ELS reject reason codes (er_reason). + */ +enum fc_els_rjt_reason { + ELS_RJT_NONE = 0, /* no reject - not to be sent */ + ELS_RJT_INVAL = 0x01, /* invalid ELS command code */ + ELS_RJT_LOGIC = 0x03, /* logical error */ + ELS_RJT_BUSY = 0x05, /* logical busy */ + ELS_RJT_PROT = 0x07, /* protocol error */ + ELS_RJT_UNAB = 0x09, /* unable to perform command request */ + ELS_RJT_UNSUP = 0x0b, /* command not supported */ + ELS_RJT_INPROG = 0x0e, /* command already in progress */ + ELS_RJT_FIP = 0x20, /* FIP error */ + ELS_RJT_VENDOR = 0xff, /* vendor specific error */ +}; + + +/* + * reason code explanation (er_explan). + */ +enum fc_els_rjt_explan { + ELS_EXPL_NONE = 0x00, /* No additional explanation */ + ELS_EXPL_SPP_OPT_ERR = 0x01, /* service parameter error - options */ + ELS_EXPL_SPP_ICTL_ERR = 0x03, /* service parm error - initiator ctl */ + ELS_EXPL_AH = 0x11, /* invalid association header */ + ELS_EXPL_AH_REQ = 0x13, /* association_header required */ + ELS_EXPL_SID = 0x15, /* invalid originator S_ID */ + ELS_EXPL_OXID_RXID = 0x17, /* invalid OX_ID-RX_ID combination */ + ELS_EXPL_INPROG = 0x19, /* Request already in progress */ + ELS_EXPL_PLOGI_REQD = 0x1e, /* N_Port login required */ + ELS_EXPL_INSUF_RES = 0x29, /* insufficient resources */ + ELS_EXPL_UNAB_DATA = 0x2a, /* unable to supply requested data */ + ELS_EXPL_UNSUPR = 0x2c, /* Request not supported */ + ELS_EXPL_INV_LEN = 0x2d, /* Invalid payload length */ + ELS_EXPL_NOT_NEIGHBOR = 0x62, /* VN2VN_Port not in neighbor set */ + /* TBD - above definitions incomplete */ +}; + +/* + * Common service parameters (N ports). + */ +struct fc_els_csp { + __u8 sp_hi_ver; /* highest version supported (obs.) */ + __u8 sp_lo_ver; /* highest version supported (obs.) */ + __be16 sp_bb_cred; /* buffer-to-buffer credits */ + __be16 sp_features; /* common feature flags */ + __be16 sp_bb_data; /* b-b state number and data field sz */ + union { + struct { + __be16 _sp_tot_seq; /* total concurrent sequences */ + __be16 _sp_rel_off; /* rel. offset by info cat */ + } sp_plogi; + struct { + __be32 _sp_r_a_tov; /* resource alloc. timeout msec */ + } sp_flogi_acc; + } sp_u; + __be32 sp_e_d_tov; /* error detect timeout value */ +}; +#define sp_tot_seq sp_u.sp_plogi._sp_tot_seq +#define sp_rel_off sp_u.sp_plogi._sp_rel_off +#define sp_r_a_tov sp_u.sp_flogi_acc._sp_r_a_tov + +#define FC_SP_BB_DATA_MASK 0xfff /* mask for data field size in sp_bb_data */ + +/* + * Minimum and maximum values for max data field size in service parameters. + */ +#define FC_SP_MIN_MAX_PAYLOAD FC_MIN_MAX_PAYLOAD +#define FC_SP_MAX_MAX_PAYLOAD FC_MAX_PAYLOAD + +/* + * sp_features + */ +#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */ +#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */ +#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */ +#define FC_SP_FT_RAND 0x4000 /* random relative offset */ +#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */ +#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */ +#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */ +#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */ +#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */ +#define FC_SP_FT_MCAST 0x0200 /* multicast */ +#define FC_SP_FT_BCAST 0x0100 /* broadcast */ +#define FC_SP_FT_HUNT 0x0080 /* hunt group */ +#define FC_SP_FT_SIMP 0x0040 /* dedicated simplex */ +#define FC_SP_FT_SEC 0x0020 /* reserved for security */ +#define FC_SP_FT_CSYN 0x0010 /* clock synch. supported */ +#define FC_SP_FT_RTTOV 0x0008 /* R_T_TOV value 100 uS, else 100 mS */ +#define FC_SP_FT_HALF 0x0004 /* dynamic half duplex */ +#define FC_SP_FT_SEQC 0x0002 /* SEQ_CNT */ +#define FC_SP_FT_PAYL 0x0001 /* FLOGI payload length 256, else 116 */ + +/* + * Class-specific service parameters. + */ +struct fc_els_cssp { + __be16 cp_class; /* class flags */ + __be16 cp_init; /* initiator flags */ + __be16 cp_recip; /* recipient flags */ + __be16 cp_rdfs; /* receive data field size */ + __be16 cp_con_seq; /* concurrent sequences */ + __be16 cp_ee_cred; /* N-port end-to-end credit */ + __u8 cp_resv1; /* reserved */ + __u8 cp_open_seq; /* open sequences per exchange */ + __u8 _cp_resv2[2]; /* reserved */ +}; + +/* + * cp_class flags. + */ +#define FC_CPC_VALID 0x8000 /* class valid */ +#define FC_CPC_IMIX 0x4000 /* intermix mode */ +#define FC_CPC_SEQ 0x0800 /* sequential delivery */ +#define FC_CPC_CAMP 0x0200 /* camp-on */ +#define FC_CPC_PRI 0x0080 /* priority */ + +/* + * cp_init flags. + * (TBD: not all flags defined here). + */ +#define FC_CPI_CSYN 0x0010 /* clock synch. capable */ + +/* + * cp_recip flags. + */ +#define FC_CPR_CSYN 0x0008 /* clock synch. capable */ + +/* + * NFC_ELS_FLOGI: Fabric login request. + * NFC_ELS_PLOGI: Port login request (same format). + */ +struct fc_els_flogi { + __u8 fl_cmd; /* command */ + __u8 _fl_resvd[3]; /* must be zero */ + struct fc_els_csp fl_csp; /* common service parameters */ + __be64 fl_wwpn; /* port name */ + __be64 fl_wwnn; /* node name */ + struct fc_els_cssp fl_cssp[4]; /* class 1-4 service parameters */ + __u8 fl_vend[16]; /* vendor version level */ +} __attribute__((__packed__)); + +/* + * Process login service parameter page. + */ +struct fc_els_spp { + __u8 spp_type; /* type code or common service params */ + __u8 spp_type_ext; /* type code extension */ + __u8 spp_flags; + __u8 _spp_resvd; + __be32 spp_orig_pa; /* originator process associator */ + __be32 spp_resp_pa; /* responder process associator */ + __be32 spp_params; /* service parameters */ +}; + +/* + * spp_flags. + */ +#define FC_SPP_OPA_VAL 0x80 /* originator proc. assoc. valid */ +#define FC_SPP_RPA_VAL 0x40 /* responder proc. assoc. valid */ +#define FC_SPP_EST_IMG_PAIR 0x20 /* establish image pair */ +#define FC_SPP_RESP_MASK 0x0f /* mask for response code (below) */ + +/* + * SPP response code in spp_flags - lower 4 bits. + */ +enum fc_els_spp_resp { + FC_SPP_RESP_ACK = 1, /* request executed */ + FC_SPP_RESP_RES = 2, /* unable due to lack of resources */ + FC_SPP_RESP_INIT = 3, /* initialization not complete */ + FC_SPP_RESP_NO_PA = 4, /* unknown process associator */ + FC_SPP_RESP_CONF = 5, /* configuration precludes image pair */ + FC_SPP_RESP_COND = 6, /* request completed conditionally */ + FC_SPP_RESP_MULT = 7, /* unable to handle multiple SPPs */ + FC_SPP_RESP_INVL = 8, /* SPP is invalid */ +}; + +/* + * ELS_RRQ - Reinstate Recovery Qualifier + */ +struct fc_els_rrq { + __u8 rrq_cmd; /* command (0x12) */ + __u8 rrq_zero[3]; /* specified as zero - part of cmd */ + __u8 rrq_resvd; /* reserved */ + __u8 rrq_s_id[3]; /* originator FID */ + __be16 rrq_ox_id; /* originator exchange ID */ + __be16 rrq_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC - Read exchange concise. + */ +struct fc_els_rec { + __u8 rec_cmd; /* command (0x13) */ + __u8 rec_zero[3]; /* specified as zero - part of cmd */ + __u8 rec_resvd; /* reserved */ + __u8 rec_s_id[3]; /* originator FID */ + __be16 rec_ox_id; /* originator exchange ID */ + __be16 rec_rx_id; /* responders exchange ID */ +}; + +/* + * ELS_REC LS_ACC payload. + */ +struct fc_els_rec_acc { + __u8 reca_cmd; /* accept (0x02) */ + __u8 reca_zero[3]; /* specified as zero - part of cmd */ + __be16 reca_ox_id; /* originator exchange ID */ + __be16 reca_rx_id; /* responders exchange ID */ + __u8 reca_resvd1; /* reserved */ + __u8 reca_ofid[3]; /* originator FID */ + __u8 reca_resvd2; /* reserved */ + __u8 reca_rfid[3]; /* responder FID */ + __be32 reca_fc4value; /* FC4 value */ + __be32 reca_e_stat; /* ESB (exchange status block) status */ +}; + +/* + * ELS_PRLI - Process login request and response. + */ +struct fc_els_prli { + __u8 prli_cmd; /* command */ + __u8 prli_spp_len; /* length of each serv. parm. page */ + __be16 prli_len; /* length of entire payload */ + /* service parameter pages follow */ +}; + +/* + * ELS_PRLO - Process logout request and response. + */ +struct fc_els_prlo { + __u8 prlo_cmd; /* command */ + __u8 prlo_obs; /* obsolete, but shall be set to 10h */ + __be16 prlo_len; /* payload length */ +}; + +/* + * ELS_ADISC payload + */ +struct fc_els_adisc { + __u8 adisc_cmd; + __u8 adisc_resv[3]; + __u8 adisc_resv1; + __u8 adisc_hard_addr[3]; + __be64 adisc_wwpn; + __be64 adisc_wwnn; + __u8 adisc_resv2; + __u8 adisc_port_id[3]; +} __attribute__((__packed__)); + +/* + * ELS_LOGO - process or fabric logout. + */ +struct fc_els_logo { + __u8 fl_cmd; /* command code */ + __u8 fl_zero[3]; /* specified as zero - part of cmd */ + __u8 fl_resvd; /* reserved */ + __u8 fl_n_port_id[3];/* N port ID */ + __be64 fl_n_port_wwn; /* port name */ +}; + +/* + * ELS_RTV - read timeout value. + */ +struct fc_els_rtv { + __u8 rtv_cmd; /* command code 0x0e */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ +}; + +/* + * LS_ACC for ELS_RTV - read timeout value. + */ +struct fc_els_rtv_acc { + __u8 rtv_cmd; /* command code 0x02 */ + __u8 rtv_zero[3]; /* specified as zero - part of cmd */ + __be32 rtv_r_a_tov; /* resource allocation timeout value */ + __be32 rtv_e_d_tov; /* error detection timeout value */ + __be32 rtv_toq; /* timeout qualifier (see below) */ +}; + +/* + * rtv_toq bits. + */ +#define FC_ELS_RTV_EDRES (1 << 26) /* E_D_TOV resolution is nS else mS */ +#define FC_ELS_RTV_RTTOV (1 << 19) /* R_T_TOV is 100 uS else 100 mS */ + +/* + * ELS_SCR - state change registration payload. + */ +struct fc_els_scr { + __u8 scr_cmd; /* command code */ + __u8 scr_resv[6]; /* reserved */ + __u8 scr_reg_func; /* registration function (see below) */ +}; + +enum fc_els_scr_func { + ELS_SCRF_FAB = 1, /* fabric-detected registration */ + ELS_SCRF_NPORT = 2, /* Nx_Port-detected registration */ + ELS_SCRF_FULL = 3, /* full registration */ + ELS_SCRF_CLEAR = 255, /* remove any current registrations */ +}; + +/* + * ELS_RSCN - registered state change notification payload. + */ +struct fc_els_rscn { + __u8 rscn_cmd; /* RSCN opcode (0x61) */ + __u8 rscn_page_len; /* page length (4) */ + __be16 rscn_plen; /* payload length including this word */ + + /* followed by 4-byte generic affected Port_ID pages */ +}; + +struct fc_els_rscn_page { + __u8 rscn_page_flags; /* event and address format */ + __u8 rscn_fid[3]; /* fabric ID */ +}; + +#define ELS_RSCN_EV_QUAL_BIT 2 /* shift count for event qualifier */ +#define ELS_RSCN_EV_QUAL_MASK 0xf /* mask for event qualifier */ +#define ELS_RSCN_ADDR_FMT_BIT 0 /* shift count for address format */ +#define ELS_RSCN_ADDR_FMT_MASK 0x3 /* mask for address format */ + +enum fc_els_rscn_ev_qual { + ELS_EV_QUAL_NONE = 0, /* unspecified */ + ELS_EV_QUAL_NS_OBJ = 1, /* changed name server object */ + ELS_EV_QUAL_PORT_ATTR = 2, /* changed port attribute */ + ELS_EV_QUAL_SERV_OBJ = 3, /* changed service object */ + ELS_EV_QUAL_SW_CONFIG = 4, /* changed switch configuration */ + ELS_EV_QUAL_REM_OBJ = 5, /* removed object */ +}; + +enum fc_els_rscn_addr_fmt { + ELS_ADDR_FMT_PORT = 0, /* rscn_fid is a port address */ + ELS_ADDR_FMT_AREA = 1, /* rscn_fid is a area address */ + ELS_ADDR_FMT_DOM = 2, /* rscn_fid is a domain address */ + ELS_ADDR_FMT_FAB = 3, /* anything on fabric may have changed */ +}; + +/* + * ELS_RNID - request Node ID. + */ +struct fc_els_rnid { + __u8 rnid_cmd; /* RNID opcode (0x78) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_resv2[3]; /* reserved */ +}; + +/* + * Node Identification Data formats (rnid_fmt) + */ +enum fc_els_rnid_fmt { + ELS_RNIDF_NONE = 0, /* no specific identification data */ + ELS_RNIDF_GEN = 0xdf, /* general topology discovery format */ +}; + +/* + * ELS_RNID response. + */ +struct fc_els_rnid_resp { + __u8 rnid_cmd; /* response code (LS_ACC) */ + __u8 rnid_resv[3]; /* reserved */ + __u8 rnid_fmt; /* data format */ + __u8 rnid_cid_len; /* common ID data length */ + __u8 rnid_resv2; /* reserved */ + __u8 rnid_sid_len; /* specific ID data length */ +}; + +struct fc_els_rnid_cid { + __be64 rnid_wwpn; /* N port name */ + __be64 rnid_wwnn; /* node name */ +}; + +struct fc_els_rnid_gen { + __u8 rnid_vend_id[16]; /* vendor-unique ID */ + __be32 rnid_atype; /* associated type (see below) */ + __be32 rnid_phys_port; /* physical port number */ + __be32 rnid_att_nodes; /* number of attached nodes */ + __u8 rnid_node_mgmt; /* node management (see below) */ + __u8 rnid_ip_ver; /* IP version (see below) */ + __be16 rnid_prot_port; /* UDP / TCP port number */ + __be32 rnid_ip_addr[4]; /* IP address */ + __u8 rnid_resvd[2]; /* reserved */ + __be16 rnid_vend_spec; /* vendor-specific field */ +}; + +enum fc_els_rnid_atype { + ELS_RNIDA_UNK = 0x01, /* unknown */ + ELS_RNIDA_OTHER = 0x02, /* none of the following */ + ELS_RNIDA_HUB = 0x03, + ELS_RNIDA_SWITCH = 0x04, + ELS_RNIDA_GATEWAY = 0x05, + ELS_RNIDA_CONV = 0x06, /* Obsolete, do not use this value */ + ELS_RNIDA_HBA = 0x07, /* Obsolete, do not use this value */ + ELS_RNIDA_PROXY = 0x08, /* Obsolete, do not use this value */ + ELS_RNIDA_STORAGE = 0x09, + ELS_RNIDA_HOST = 0x0a, + ELS_RNIDA_SUBSYS = 0x0b, /* storage subsystem (e.g., RAID) */ + ELS_RNIDA_ACCESS = 0x0e, /* access device (e.g. media changer) */ + ELS_RNIDA_NAS = 0x11, /* NAS server */ + ELS_RNIDA_BRIDGE = 0x12, /* bridge */ + ELS_RNIDA_VIRT = 0x13, /* virtualization device */ + ELS_RNIDA_MF = 0xff, /* multifunction device (bits below) */ + ELS_RNIDA_MF_HUB = 1UL << 31, /* hub */ + ELS_RNIDA_MF_SW = 1UL << 30, /* switch */ + ELS_RNIDA_MF_GW = 1UL << 29, /* gateway */ + ELS_RNIDA_MF_ST = 1UL << 28, /* storage */ + ELS_RNIDA_MF_HOST = 1UL << 27, /* host */ + ELS_RNIDA_MF_SUB = 1UL << 26, /* storage subsystem */ + ELS_RNIDA_MF_ACC = 1UL << 25, /* storage access dev */ + ELS_RNIDA_MF_WDM = 1UL << 24, /* wavelength division mux */ + ELS_RNIDA_MF_NAS = 1UL << 23, /* NAS server */ + ELS_RNIDA_MF_BR = 1UL << 22, /* bridge */ + ELS_RNIDA_MF_VIRT = 1UL << 21, /* virtualization device */ +}; + +enum fc_els_rnid_mgmt { + ELS_RNIDM_SNMP = 0, + ELS_RNIDM_TELNET = 1, + ELS_RNIDM_HTTP = 2, + ELS_RNIDM_HTTPS = 3, + ELS_RNIDM_XML = 4, /* HTTP + XML */ +}; + +enum fc_els_rnid_ipver { + ELS_RNIDIP_NONE = 0, /* no IP support or node mgmt. */ + ELS_RNIDIP_V4 = 1, /* IPv4 */ + ELS_RNIDIP_V6 = 2, /* IPv6 */ +}; + +/* + * ELS RPL - Read Port List. + */ +struct fc_els_rpl { + __u8 rpl_cmd; /* command */ + __u8 rpl_resv[5]; /* reserved - must be zero */ + __be16 rpl_max_size; /* maximum response size or zero */ + __u8 rpl_resv1; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ +}; + +/* + * Port number block in RPL response. + */ +struct fc_els_pnb { + __be32 pnb_phys_pn; /* physical port number */ + __u8 pnb_resv; /* reserved */ + __u8 pnb_port_id[3]; /* port ID */ + __be64 pnb_wwpn; /* port name */ +}; + +/* + * RPL LS_ACC response. + */ +struct fc_els_rpl_resp { + __u8 rpl_cmd; /* ELS_LS_ACC */ + __u8 rpl_resv1; /* reserved - must be zero */ + __be16 rpl_plen; /* payload length */ + __u8 rpl_resv2; /* reserved - must be zero */ + __u8 rpl_llen[3]; /* list length */ + __u8 rpl_resv3; /* reserved - must be zero */ + __u8 rpl_index[3]; /* starting index */ + struct fc_els_pnb rpl_pnb[1]; /* variable number of PNBs */ +}; + +/* + * Link Error Status Block. + */ +struct fc_els_lesb { + __be32 lesb_link_fail; /* link failure count */ + __be32 lesb_sync_loss; /* loss of synchronization count */ + __be32 lesb_sig_loss; /* loss of signal count */ + __be32 lesb_prim_err; /* primitive sequence error count */ + __be32 lesb_inv_word; /* invalid transmission word count */ + __be32 lesb_inv_crc; /* invalid CRC count */ +}; + +/* + * ELS RPS - Read Port Status Block request. + */ +struct fc_els_rps { + __u8 rps_cmd; /* command */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __be64 rps_port_spec; /* port selection */ +}; + +enum fc_els_rps_flag { + FC_ELS_RPS_DID = 0x00, /* port identified by D_ID of req. */ + FC_ELS_RPS_PPN = 0x01, /* port_spec is physical port number */ + FC_ELS_RPS_WWPN = 0x02, /* port_spec is port WWN */ +}; + +/* + * ELS RPS LS_ACC response. + */ +struct fc_els_rps_resp { + __u8 rps_cmd; /* command - LS_ACC */ + __u8 rps_resv[2]; /* reserved - must be zero */ + __u8 rps_flag; /* flag - see below */ + __u8 rps_resv2[2]; /* reserved */ + __be16 rps_status; /* port status - see below */ + struct fc_els_lesb rps_lesb; /* link error status block */ +}; + +enum fc_els_rps_resp_flag { + FC_ELS_RPS_LPEV = 0x01, /* L_port extension valid */ +}; + +enum fc_els_rps_resp_status { + FC_ELS_RPS_PTP = 1 << 5, /* point-to-point connection */ + FC_ELS_RPS_LOOP = 1 << 4, /* loop mode */ + FC_ELS_RPS_FAB = 1 << 3, /* fabric present */ + FC_ELS_RPS_NO_SIG = 1 << 2, /* loss of signal */ + FC_ELS_RPS_NO_SYNC = 1 << 1, /* loss of synchronization */ + FC_ELS_RPS_RESET = 1 << 0, /* in link reset protocol */ +}; + +/* + * ELS LIRR - Link Incident Record Registration request. + */ +struct fc_els_lirr { + __u8 lirr_cmd; /* command */ + __u8 lirr_resv[3]; /* reserved - must be zero */ + __u8 lirr_func; /* registration function */ + __u8 lirr_fmt; /* FC-4 type of RLIR requested */ + __u8 lirr_resv2[2]; /* reserved - must be zero */ +}; + +enum fc_els_lirr_func { + ELS_LIRR_SET_COND = 0x01, /* set - conditionally receive */ + ELS_LIRR_SET_UNCOND = 0x02, /* set - unconditionally receive */ + ELS_LIRR_CLEAR = 0xff /* clear registration */ +}; + +/* + * ELS SRL - Scan Remote Loop request. + */ +struct fc_els_srl { + __u8 srl_cmd; /* command */ + __u8 srl_resv[3]; /* reserved - must be zero */ + __u8 srl_flag; /* flag - see below */ + __u8 srl_flag_param[3]; /* flag parameter */ +}; + +enum fc_els_srl_flag { + FC_ELS_SRL_ALL = 0x00, /* scan all FL ports */ + FC_ELS_SRL_ONE = 0x01, /* scan specified loop */ + FC_ELS_SRL_EN_PER = 0x02, /* enable periodic scanning (param) */ + FC_ELS_SRL_DIS_PER = 0x03, /* disable periodic scanning */ +}; + +/* + * ELS RLS - Read Link Error Status Block request. + */ +struct fc_els_rls { + __u8 rls_cmd; /* command */ + __u8 rls_resv[4]; /* reserved - must be zero */ + __u8 rls_port_id[3]; /* port ID */ +}; + +/* + * ELS RLS LS_ACC Response. + */ +struct fc_els_rls_resp { + __u8 rls_cmd; /* ELS_LS_ACC */ + __u8 rls_resv[3]; /* reserved - must be zero */ + struct fc_els_lesb rls_lesb; /* link error status block */ +}; + +/* + * ELS RLIR - Registered Link Incident Report. + * This is followed by the CLIR and the CLID, described below. + */ +struct fc_els_rlir { + __u8 rlir_cmd; /* command */ + __u8 rlir_resv[3]; /* reserved - must be zero */ + __u8 rlir_fmt; /* format (FC4-type if type specific) */ + __u8 rlir_clr_len; /* common link incident record length */ + __u8 rlir_cld_len; /* common link incident desc. length */ + __u8 rlir_slr_len; /* spec. link incident record length */ +}; + +/* + * CLIR - Common Link Incident Record Data. - Sent via RLIR. + */ +struct fc_els_clir { + __be64 clir_wwpn; /* incident port name */ + __be64 clir_wwnn; /* incident port node name */ + __u8 clir_port_type; /* incident port type */ + __u8 clir_port_id[3]; /* incident port ID */ + + __be64 clir_conn_wwpn; /* connected port name */ + __be64 clir_conn_wwnn; /* connected node name */ + __be64 clir_fab_name; /* fabric name */ + __be32 clir_phys_port; /* physical port number */ + __be32 clir_trans_id; /* transaction ID */ + __u8 clir_resv[3]; /* reserved */ + __u8 clir_ts_fmt; /* time stamp format */ + __be64 clir_timestamp; /* time stamp */ +}; + +/* + * CLIR clir_ts_fmt - time stamp format values. + */ +enum fc_els_clir_ts_fmt { + ELS_CLIR_TS_UNKNOWN = 0, /* time stamp field unknown */ + ELS_CLIR_TS_SEC_FRAC = 1, /* time in seconds and fractions */ + ELS_CLIR_TS_CSU = 2, /* time in clock synch update format */ +}; + +/* + * Common Link Incident Descriptor - sent via RLIR. + */ +struct fc_els_clid { + __u8 clid_iq; /* incident qualifier flags */ + __u8 clid_ic; /* incident code */ + __be16 clid_epai; /* domain/area of ISL */ +}; + +/* + * CLID incident qualifier flags. + */ +enum fc_els_clid_iq { + ELS_CLID_SWITCH = 0x20, /* incident port is a switch node */ + ELS_CLID_E_PORT = 0x10, /* incident is an ISL (E) port */ + ELS_CLID_SEV_MASK = 0x0c, /* severity 2-bit field mask */ + ELS_CLID_SEV_INFO = 0x00, /* report is informational */ + ELS_CLID_SEV_INOP = 0x08, /* link not operational */ + ELS_CLID_SEV_DEG = 0x04, /* link degraded but operational */ + ELS_CLID_LASER = 0x02, /* subassembly is a laser */ + ELS_CLID_FRU = 0x01, /* format can identify a FRU */ +}; + +/* + * CLID incident code. + */ +enum fc_els_clid_ic { + ELS_CLID_IC_IMPL = 1, /* implicit incident */ + ELS_CLID_IC_BER = 2, /* bit-error-rate threshold exceeded */ + ELS_CLID_IC_LOS = 3, /* loss of synch or signal */ + ELS_CLID_IC_NOS = 4, /* non-operational primitive sequence */ + ELS_CLID_IC_PST = 5, /* primitive sequence timeout */ + ELS_CLID_IC_INVAL = 6, /* invalid primitive sequence */ + ELS_CLID_IC_LOOP_TO = 7, /* loop initialization time out */ + ELS_CLID_IC_LIP = 8, /* receiving LIP */ +}; + +#endif /* _FC_ELS_H_ */ diff --git a/include/uapi/scsi/fc/fc_fs.h b/include/uapi/scsi/fc/fc_fs.h new file mode 100644 index 000000000000..50f28b143451 --- /dev/null +++ b/include/uapi/scsi/fc/fc_fs.h @@ -0,0 +1,348 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_FS_H_ +#define _FC_FS_H_ + +#include + +/* + * Fibre Channel Framing and Signalling definitions. + * From T11 FC-FS-2 Rev 0.90 - 9 August 2005. + */ + +/* + * Frame header + */ +struct fc_frame_header { + __u8 fh_r_ctl; /* routing control */ + __u8 fh_d_id[3]; /* Destination ID */ + + __u8 fh_cs_ctl; /* class of service control / pri */ + __u8 fh_s_id[3]; /* Source ID */ + + __u8 fh_type; /* see enum fc_fh_type below */ + __u8 fh_f_ctl[3]; /* frame control */ + + __u8 fh_seq_id; /* sequence ID */ + __u8 fh_df_ctl; /* data field control */ + __be16 fh_seq_cnt; /* sequence count */ + + __be16 fh_ox_id; /* originator exchange ID */ + __be16 fh_rx_id; /* responder exchange ID */ + __be32 fh_parm_offset; /* parameter or relative offset */ +}; + +#define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ + +#define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ +#define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ + +#define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) +#define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) + +/* + * fh_r_ctl - Routing control definitions. + */ + /* + * FC-4 device_data. + */ +enum fc_rctl { + FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ + FC_RCTL_DD_SOL_DATA = 0x01, /* solicited data */ + FC_RCTL_DD_UNSOL_CTL = 0x02, /* unsolicited control */ + FC_RCTL_DD_SOL_CTL = 0x03, /* solicited control or reply */ + FC_RCTL_DD_UNSOL_DATA = 0x04, /* unsolicited data */ + FC_RCTL_DD_DATA_DESC = 0x05, /* data descriptor */ + FC_RCTL_DD_UNSOL_CMD = 0x06, /* unsolicited command */ + FC_RCTL_DD_CMD_STATUS = 0x07, /* command status */ + +#define FC_RCTL_ILS_REQ FC_RCTL_DD_UNSOL_CTL /* ILS request */ +#define FC_RCTL_ILS_REP FC_RCTL_DD_SOL_CTL /* ILS reply */ + + /* + * Extended Link_Data + */ + FC_RCTL_ELS_REQ = 0x22, /* extended link services request */ + FC_RCTL_ELS_REP = 0x23, /* extended link services reply */ + FC_RCTL_ELS4_REQ = 0x32, /* FC-4 ELS request */ + FC_RCTL_ELS4_REP = 0x33, /* FC-4 ELS reply */ + /* + * Optional Extended Headers + */ + FC_RCTL_VFTH = 0x50, /* virtual fabric tagging header */ + FC_RCTL_IFRH = 0x51, /* inter-fabric routing header */ + FC_RCTL_ENCH = 0x52, /* encapsulation header */ + /* + * Basic Link Services fh_r_ctl values. + */ + FC_RCTL_BA_NOP = 0x80, /* basic link service NOP */ + FC_RCTL_BA_ABTS = 0x81, /* basic link service abort */ + FC_RCTL_BA_RMC = 0x82, /* remove connection */ + FC_RCTL_BA_ACC = 0x84, /* basic accept */ + FC_RCTL_BA_RJT = 0x85, /* basic reject */ + FC_RCTL_BA_PRMT = 0x86, /* dedicated connection preempted */ + /* + * Link Control Information. + */ + FC_RCTL_ACK_1 = 0xc0, /* acknowledge_1 */ + FC_RCTL_ACK_0 = 0xc1, /* acknowledge_0 */ + FC_RCTL_P_RJT = 0xc2, /* port reject */ + FC_RCTL_F_RJT = 0xc3, /* fabric reject */ + FC_RCTL_P_BSY = 0xc4, /* port busy */ + FC_RCTL_F_BSY = 0xc5, /* fabric busy to data frame */ + FC_RCTL_F_BSYL = 0xc6, /* fabric busy to link control frame */ + FC_RCTL_LCR = 0xc7, /* link credit reset */ + FC_RCTL_END = 0xc9, /* end */ +}; + /* incomplete list of definitions */ + +/* + * R_CTL names initializer. + * Please keep this matching the above definitions. + */ +#define FC_RCTL_NAMES_INIT { \ + [FC_RCTL_DD_UNCAT] = "uncat", \ + [FC_RCTL_DD_SOL_DATA] = "sol data", \ + [FC_RCTL_DD_UNSOL_CTL] = "unsol ctl", \ + [FC_RCTL_DD_SOL_CTL] = "sol ctl/reply", \ + [FC_RCTL_DD_UNSOL_DATA] = "unsol data", \ + [FC_RCTL_DD_DATA_DESC] = "data desc", \ + [FC_RCTL_DD_UNSOL_CMD] = "unsol cmd", \ + [FC_RCTL_DD_CMD_STATUS] = "cmd status", \ + [FC_RCTL_ELS_REQ] = "ELS req", \ + [FC_RCTL_ELS_REP] = "ELS rep", \ + [FC_RCTL_ELS4_REQ] = "FC-4 ELS req", \ + [FC_RCTL_ELS4_REP] = "FC-4 ELS rep", \ + [FC_RCTL_BA_NOP] = "BLS NOP", \ + [FC_RCTL_BA_ABTS] = "BLS abort", \ + [FC_RCTL_BA_RMC] = "BLS remove connection", \ + [FC_RCTL_BA_ACC] = "BLS accept", \ + [FC_RCTL_BA_RJT] = "BLS reject", \ + [FC_RCTL_BA_PRMT] = "BLS dedicated connection preempted", \ + [FC_RCTL_ACK_1] = "LC ACK_1", \ + [FC_RCTL_ACK_0] = "LC ACK_0", \ + [FC_RCTL_P_RJT] = "LC port reject", \ + [FC_RCTL_F_RJT] = "LC fabric reject", \ + [FC_RCTL_P_BSY] = "LC port busy", \ + [FC_RCTL_F_BSY] = "LC fabric busy to data frame", \ + [FC_RCTL_F_BSYL] = "LC fabric busy to link control frame",\ + [FC_RCTL_LCR] = "LC link credit reset", \ + [FC_RCTL_END] = "LC end", \ +} + +/* + * Well-known fabric addresses. + */ +enum fc_well_known_fid { + FC_FID_NONE = 0x000000, /* No destination */ + FC_FID_BCAST = 0xffffff, /* broadcast */ + FC_FID_FLOGI = 0xfffffe, /* fabric login */ + FC_FID_FCTRL = 0xfffffd, /* fabric controller */ + FC_FID_DIR_SERV = 0xfffffc, /* directory server */ + FC_FID_TIME_SERV = 0xfffffb, /* time server */ + FC_FID_MGMT_SERV = 0xfffffa, /* management server */ + FC_FID_QOS = 0xfffff9, /* QoS Facilitator */ + FC_FID_ALIASES = 0xfffff8, /* alias server (FC-PH2) */ + FC_FID_SEC_KEY = 0xfffff7, /* Security key dist. server */ + FC_FID_CLOCK = 0xfffff6, /* clock synch server */ + FC_FID_MCAST_SERV = 0xfffff5, /* multicast server */ +}; + +#define FC_FID_WELL_KNOWN_MAX 0xffffff /* highest well-known fabric ID */ +#define FC_FID_WELL_KNOWN_BASE 0xfffff5 /* start of well-known fabric ID */ + +/* + * Other well-known addresses, outside the above contiguous range. + */ +#define FC_FID_DOM_MGR 0xfffc00 /* domain manager base */ + +/* + * Fabric ID bytes. + */ +#define FC_FID_DOMAIN 0 +#define FC_FID_PORT 1 +#define FC_FID_LINK 2 + +/* + * fh_type codes + */ +enum fc_fh_type { + FC_TYPE_BLS = 0x00, /* basic link service */ + FC_TYPE_ELS = 0x01, /* extended link service */ + FC_TYPE_IP = 0x05, /* IP over FC, RFC 4338 */ + FC_TYPE_FCP = 0x08, /* SCSI FCP */ + FC_TYPE_CT = 0x20, /* Fibre Channel Services (FC-CT) */ + FC_TYPE_ILS = 0x22, /* internal link service */ +}; + +/* + * FC_TYPE names initializer. + * Please keep this matching the above definitions. + */ +#define FC_TYPE_NAMES_INIT { \ + [FC_TYPE_BLS] = "BLS", \ + [FC_TYPE_ELS] = "ELS", \ + [FC_TYPE_IP] = "IP", \ + [FC_TYPE_FCP] = "FCP", \ + [FC_TYPE_CT] = "CT", \ + [FC_TYPE_ILS] = "ILS", \ +} + +/* + * Exchange IDs. + */ +#define FC_XID_UNKNOWN 0xffff /* unknown exchange ID */ +#define FC_XID_MIN 0x0 /* supported min exchange ID */ +#define FC_XID_MAX 0xfffe /* supported max exchange ID */ + +/* + * fh_f_ctl - Frame control flags. + */ +#define FC_FC_EX_CTX (1 << 23) /* sent by responder to exchange */ +#define FC_FC_SEQ_CTX (1 << 22) /* sent by responder to sequence */ +#define FC_FC_FIRST_SEQ (1 << 21) /* first sequence of this exchange */ +#define FC_FC_LAST_SEQ (1 << 20) /* last sequence of this exchange */ +#define FC_FC_END_SEQ (1 << 19) /* last frame of sequence */ +#define FC_FC_END_CONN (1 << 18) /* end of class 1 connection pending */ +#define FC_FC_RES_B17 (1 << 17) /* reserved */ +#define FC_FC_SEQ_INIT (1 << 16) /* transfer of sequence initiative */ +#define FC_FC_X_ID_REASS (1 << 15) /* exchange ID has been changed */ +#define FC_FC_X_ID_INVAL (1 << 14) /* exchange ID invalidated */ + +#define FC_FC_ACK_1 (1 << 12) /* 13:12 = 1: ACK_1 expected */ +#define FC_FC_ACK_N (2 << 12) /* 13:12 = 2: ACK_N expected */ +#define FC_FC_ACK_0 (3 << 12) /* 13:12 = 3: ACK_0 expected */ + +#define FC_FC_RES_B11 (1 << 11) /* reserved */ +#define FC_FC_RES_B10 (1 << 10) /* reserved */ +#define FC_FC_RETX_SEQ (1 << 9) /* retransmitted sequence */ +#define FC_FC_UNI_TX (1 << 8) /* unidirectional transmit (class 1) */ +#define FC_FC_CONT_SEQ(i) ((i) << 6) +#define FC_FC_ABT_SEQ(i) ((i) << 4) +#define FC_FC_REL_OFF (1 << 3) /* parameter is relative offset */ +#define FC_FC_RES2 (1 << 2) /* reserved */ +#define FC_FC_FILL(i) ((i) & 3) /* 1:0: bytes of trailing fill */ + +/* + * BA_ACC payload. + */ +struct fc_ba_acc { + __u8 ba_seq_id_val; /* SEQ_ID validity */ +#define FC_BA_SEQ_ID_VAL 0x80 + __u8 ba_seq_id; /* SEQ_ID of seq last deliverable */ + __u8 ba_resvd[2]; /* reserved */ + __be16 ba_ox_id; /* OX_ID for aborted seq or exch */ + __be16 ba_rx_id; /* RX_ID for aborted seq or exch */ + __be16 ba_low_seq_cnt; /* low SEQ_CNT of aborted seq */ + __be16 ba_high_seq_cnt; /* high SEQ_CNT of aborted seq */ +}; + +/* + * BA_RJT: Basic Reject payload. + */ +struct fc_ba_rjt { + __u8 br_resvd; /* reserved */ + __u8 br_reason; /* reason code */ + __u8 br_explan; /* reason explanation */ + __u8 br_vendor; /* vendor unique code */ +}; + +/* + * BA_RJT reason codes. + * From FS-2. + */ +enum fc_ba_rjt_reason { + FC_BA_RJT_NONE = 0, /* in software this means no reject */ + FC_BA_RJT_INVL_CMD = 0x01, /* invalid command code */ + FC_BA_RJT_LOG_ERR = 0x03, /* logical error */ + FC_BA_RJT_LOG_BUSY = 0x05, /* logical busy */ + FC_BA_RJT_PROTO_ERR = 0x07, /* protocol error */ + FC_BA_RJT_UNABLE = 0x09, /* unable to perform request */ + FC_BA_RJT_VENDOR = 0xff, /* vendor-specific (see br_vendor) */ +}; + +/* + * BA_RJT reason code explanations. + */ +enum fc_ba_rjt_explan { + FC_BA_RJT_EXP_NONE = 0x00, /* no additional expanation */ + FC_BA_RJT_INV_XID = 0x03, /* invalid OX_ID-RX_ID combination */ + FC_BA_RJT_ABT = 0x05, /* sequence aborted, no seq info */ +}; + +/* + * P_RJT or F_RJT: Port Reject or Fabric Reject parameter field. + */ +struct fc_pf_rjt { + __u8 rj_action; /* reserved */ + __u8 rj_reason; /* reason code */ + __u8 rj_resvd; /* reserved */ + __u8 rj_vendor; /* vendor unique code */ +}; + +/* + * P_RJT and F_RJT reject reason codes. + */ +enum fc_pf_rjt_reason { + FC_RJT_NONE = 0, /* non-reject (reserved by standard) */ + FC_RJT_INVL_DID = 0x01, /* invalid destination ID */ + FC_RJT_INVL_SID = 0x02, /* invalid source ID */ + FC_RJT_P_UNAV_T = 0x03, /* port unavailable, temporary */ + FC_RJT_P_UNAV = 0x04, /* port unavailable, permanent */ + FC_RJT_CLS_UNSUP = 0x05, /* class not supported */ + FC_RJT_DEL_USAGE = 0x06, /* delimiter usage error */ + FC_RJT_TYPE_UNSUP = 0x07, /* type not supported */ + FC_RJT_LINK_CTL = 0x08, /* invalid link control */ + FC_RJT_R_CTL = 0x09, /* invalid R_CTL field */ + FC_RJT_F_CTL = 0x0a, /* invalid F_CTL field */ + FC_RJT_OX_ID = 0x0b, /* invalid originator exchange ID */ + FC_RJT_RX_ID = 0x0c, /* invalid responder exchange ID */ + FC_RJT_SEQ_ID = 0x0d, /* invalid sequence ID */ + FC_RJT_DF_CTL = 0x0e, /* invalid DF_CTL field */ + FC_RJT_SEQ_CNT = 0x0f, /* invalid SEQ_CNT field */ + FC_RJT_PARAM = 0x10, /* invalid parameter field */ + FC_RJT_EXCH_ERR = 0x11, /* exchange error */ + FC_RJT_PROTO = 0x12, /* protocol error */ + FC_RJT_LEN = 0x13, /* incorrect length */ + FC_RJT_UNEXP_ACK = 0x14, /* unexpected ACK */ + FC_RJT_FAB_CLASS = 0x15, /* class unsupported by fabric entity */ + FC_RJT_LOGI_REQ = 0x16, /* login required */ + FC_RJT_SEQ_XS = 0x17, /* excessive sequences attempted */ + FC_RJT_EXCH_EST = 0x18, /* unable to establish exchange */ + FC_RJT_FAB_UNAV = 0x1a, /* fabric unavailable */ + FC_RJT_VC_ID = 0x1b, /* invalid VC_ID (class 4) */ + FC_RJT_CS_CTL = 0x1c, /* invalid CS_CTL field */ + FC_RJT_INSUF_RES = 0x1d, /* insuff. resources for VC (Class 4) */ + FC_RJT_INVL_CLS = 0x1f, /* invalid class of service */ + FC_RJT_PREEMT_RJT = 0x20, /* preemption request rejected */ + FC_RJT_PREEMT_DIS = 0x21, /* preemption not enabled */ + FC_RJT_MCAST_ERR = 0x22, /* multicast error */ + FC_RJT_MCAST_ET = 0x23, /* multicast error terminate */ + FC_RJT_PRLI_REQ = 0x24, /* process login required */ + FC_RJT_INVL_ATT = 0x25, /* invalid attachment */ + FC_RJT_VENDOR = 0xff, /* vendor specific reject */ +}; + +/* default timeout values */ + +#define FC_DEF_E_D_TOV 2000UL +#define FC_DEF_R_A_TOV 10000UL + +#endif /* _FC_FS_H_ */ diff --git a/include/uapi/scsi/fc/fc_gs.h b/include/uapi/scsi/fc/fc_gs.h new file mode 100644 index 000000000000..a37346d47eb1 --- /dev/null +++ b/include/uapi/scsi/fc/fc_gs.h @@ -0,0 +1,96 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_GS_H_ +#define _FC_GS_H_ + +#include + +/* + * Fibre Channel Services - Common Transport. + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +struct fc_ct_hdr { + __u8 ct_rev; /* revision */ + __u8 ct_in_id[3]; /* N_Port ID of original requestor */ + __u8 ct_fs_type; /* type of fibre channel service */ + __u8 ct_fs_subtype; /* subtype */ + __u8 ct_options; + __u8 _ct_resvd1; + __be16 ct_cmd; /* command / response code */ + __be16 ct_mr_size; /* maximum / residual size */ + __u8 _ct_resvd2; + __u8 ct_reason; /* reject reason */ + __u8 ct_explan; /* reason code explanation */ + __u8 ct_vendor; /* vendor unique data */ +}; + +#define FC_CT_HDR_LEN 16 /* expected sizeof (struct fc_ct_hdr) */ + +enum fc_ct_rev { + FC_CT_REV = 1 /* common transport revision */ +}; + +/* + * ct_fs_type values. + */ +enum fc_ct_fs_type { + FC_FST_ALIAS = 0xf8, /* alias service */ + FC_FST_MGMT = 0xfa, /* management service */ + FC_FST_TIME = 0xfb, /* time service */ + FC_FST_DIR = 0xfc, /* directory service */ +}; + +/* + * ct_cmd: Command / response codes + */ +enum fc_ct_cmd { + FC_FS_RJT = 0x8001, /* reject */ + FC_FS_ACC = 0x8002, /* accept */ +}; + +/* + * FS_RJT reason codes. + */ +enum fc_ct_reason { + FC_FS_RJT_CMD = 0x01, /* invalid command code */ + FC_FS_RJT_VER = 0x02, /* invalid version level */ + FC_FS_RJT_LOG = 0x03, /* logical error */ + FC_FS_RJT_IUSIZ = 0x04, /* invalid IU size */ + FC_FS_RJT_BSY = 0x05, /* logical busy */ + FC_FS_RJT_PROTO = 0x07, /* protocol error */ + FC_FS_RJT_UNABL = 0x09, /* unable to perform command request */ + FC_FS_RJT_UNSUP = 0x0b, /* command not supported */ +}; + +/* + * FS_RJT reason code explanations. + */ +enum fc_ct_explan { + FC_FS_EXP_NONE = 0x00, /* no additional explanation */ + FC_FS_EXP_PID = 0x01, /* port ID not registered */ + FC_FS_EXP_PNAM = 0x02, /* port name not registered */ + FC_FS_EXP_NNAM = 0x03, /* node name not registered */ + FC_FS_EXP_COS = 0x04, /* class of service not registered */ + FC_FS_EXP_FTNR = 0x07, /* FC-4 types not registered */ + /* definitions not complete */ +}; + +#endif /* _FC_GS_H_ */ diff --git a/include/uapi/scsi/fc/fc_ns.h b/include/uapi/scsi/fc/fc_ns.h new file mode 100644 index 000000000000..f7751d53f1d3 --- /dev/null +++ b/include/uapi/scsi/fc/fc_ns.h @@ -0,0 +1,208 @@ +/* + * Copyright(c) 2007 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_NS_H_ +#define _FC_NS_H_ + +#include + +/* + * Fibre Channel Services - Name Service (dNS) + * From T11.org FC-GS-2 Rev 5.3 November 1998. + */ + +/* + * Common-transport sub-type for Name Server. + */ +#define FC_NS_SUBTYPE 2 /* fs_ct_hdr.ct_fs_subtype */ + +/* + * Name server Requests. + * Note: this is an incomplete list, some unused requests are omitted. + */ +enum fc_ns_req { + FC_NS_GA_NXT = 0x0100, /* get all next */ + FC_NS_GI_A = 0x0101, /* get identifiers - scope */ + FC_NS_GPN_ID = 0x0112, /* get port name by ID */ + FC_NS_GNN_ID = 0x0113, /* get node name by ID */ + FC_NS_GSPN_ID = 0x0118, /* get symbolic port name */ + FC_NS_GID_PN = 0x0121, /* get ID for port name */ + FC_NS_GID_NN = 0x0131, /* get IDs for node name */ + FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */ + FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */ + FC_NS_GID_PT = 0x01a1, /* get IDs by port type */ + FC_NS_RPN_ID = 0x0212, /* reg port name for ID */ + FC_NS_RNN_ID = 0x0213, /* reg node name for ID */ + FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */ + FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */ + FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */ + FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */ +}; + +/* + * Port type values. + */ +enum fc_ns_pt { + FC_NS_UNID_PORT = 0x00, /* unidentified */ + FC_NS_N_PORT = 0x01, /* N port */ + FC_NS_NL_PORT = 0x02, /* NL port */ + FC_NS_FNL_PORT = 0x03, /* F/NL port */ + FC_NS_NX_PORT = 0x7f, /* Nx port */ + FC_NS_F_PORT = 0x81, /* F port */ + FC_NS_FL_PORT = 0x82, /* FL port */ + FC_NS_E_PORT = 0x84, /* E port */ + FC_NS_B_PORT = 0x85, /* B port */ +}; + +/* + * Port type object. + */ +struct fc_ns_pt_obj { + __u8 pt_type; +}; + +/* + * Port ID object + */ +struct fc_ns_fid { + __u8 fp_flags; /* flags for responses only */ + __u8 fp_fid[3]; +}; + +/* + * fp_flags in port ID object, for responses only. + */ +#define FC_NS_FID_LAST 0x80 /* last object */ + +/* + * FC4-types object. + */ +#define FC_NS_TYPES 256 /* number of possible FC-4 types */ +#define FC_NS_BPW 32 /* bits per word in bitmap */ + +struct fc_ns_fts { + __be32 ff_type_map[FC_NS_TYPES / FC_NS_BPW]; /* bitmap of FC-4 types */ +}; + +/* + * FC4-features object. + */ +struct fc_ns_ff { + __be32 fd_feat[FC_NS_TYPES * 4 / FC_NS_BPW]; /* 4-bits per FC-type */ +}; + +/* + * GID_PT request. + */ +struct fc_ns_gid_pt { + __u8 fn_pt_type; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_resvd; +}; + +/* + * GID_FT or GPN_FT request. + */ +struct fc_ns_gid_ft { + __u8 fn_resvd; + __u8 fn_domain_id_scope; + __u8 fn_area_id_scope; + __u8 fn_fc4_type; +}; + +/* + * GPN_FT response. + */ +struct fc_gpn_ft_resp { + __u8 fp_flags; /* see fp_flags definitions above */ + __u8 fp_fid[3]; /* port ID */ + __be32 fp_resvd; + __be64 fp_wwpn; /* port name */ +}; + +/* + * GID_PN request + */ +struct fc_ns_gid_pn { + __be64 fn_wwpn; /* port name */ +}; + +/* + * GID_PN response or GSPN_ID request + */ +struct fc_gid_pn_resp { + __u8 fp_resvd; + __u8 fp_fid[3]; /* port ID */ +}; + +/* + * GSPN_ID response + */ +struct fc_gspn_resp { + __u8 fp_name_len; + char fp_name[]; +}; + +/* + * RFT_ID request - register FC-4 types for ID. + */ +struct fc_ns_rft_id { + struct fc_ns_fid fr_fid; /* port ID object */ + struct fc_ns_fts fr_fts; /* FC-4 types object */ +}; + +/* + * RPN_ID request - register port name for ID. + * RNN_ID request - register node name for ID. + */ +struct fc_ns_rn_id { + struct fc_ns_fid fr_fid; /* port ID object */ + __be64 fr_wwn; /* node name or port name */ +} __attribute__((__packed__)); + +/* + * RSNN_NN request - register symbolic node name + */ +struct fc_ns_rsnn { + __be64 fr_wwn; /* node name */ + __u8 fr_name_len; + char fr_name[]; +} __attribute__((__packed__)); + +/* + * RSPN_ID request - register symbolic port name + */ +struct fc_ns_rspn { + struct fc_ns_fid fr_fid; /* port ID object */ + __u8 fr_name_len; + char fr_name[]; +} __attribute__((__packed__)); + +/* + * RFF_ID request - register FC-4 Features for ID. + */ +struct fc_ns_rff_id { + struct fc_ns_fid fr_fid; /* port ID object */ + __u8 fr_resvd[2]; + __u8 fr_feat; /* FC-4 Feature bits */ + __u8 fr_type; /* FC-4 type */ +} __attribute__((__packed__)); + +#endif /* _FC_NS_H_ */ -- cgit v1.3-14-g43fede From 1c810636556c8d53a37406b34a64d9b9b0161aa6 Mon Sep 17 00:00:00 2001 From: Alexander Graf Date: Fri, 4 Jan 2013 18:12:48 +0100 Subject: KVM: PPC: BookE: Implement EPR exit The External Proxy Facility in FSL BookE chips allows the interrupt controller to automatically acknowledge an interrupt as soon as a core gets its pending external interrupt delivered. Today, user space implements the interrupt controller, so we need to check on it during such a cycle. This patch implements logic for user space to enable EPR exiting, disable EPR exiting and EPR exiting itself, so that user space can acknowledge an interrupt when an external interrupt has successfully been delivered into the guest vcpu. Signed-off-by: Alexander Graf --- Documentation/virtual/kvm/api.txt | 40 +++++++++++++++++++++++++++++++++++-- arch/powerpc/include/asm/kvm_host.h | 2 ++ arch/powerpc/include/asm/kvm_ppc.h | 9 +++++++++ arch/powerpc/kvm/booke.c | 14 ++++++++++++- arch/powerpc/kvm/powerpc.c | 10 ++++++++++ include/linux/kvm_host.h | 1 + include/uapi/linux/kvm.h | 6 ++++++ 7 files changed, 79 insertions(+), 3 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 4fc2bfcb16d5..a98ed09269d7 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -2246,8 +2246,8 @@ executed a memory-mapped I/O instruction which could not be satisfied by kvm. The 'data' member contains the written data if 'is_write' is true, and should be filled by application code otherwise. -NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_DCR - and KVM_EXIT_PAPR the corresponding +NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_DCR, + KVM_EXIT_PAPR and KVM_EXIT_EPR the corresponding operations are complete (and guest state is consistent) only after userspace has re-entered the kernel with KVM_RUN. The kernel side will first finish incomplete operations and then check for pending signals. Userspace @@ -2366,6 +2366,25 @@ interrupt for the target subchannel has been dequeued and subchannel_id, subchannel_nr, io_int_parm and io_int_word contain the parameters for that interrupt. ipb is needed for instruction parameter decoding. + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; + +On FSL BookE PowerPC chips, the interrupt controller has a fast patch +interrupt acknowledge path to the core. When the core successfully +delivers an interrupt, it automatically populates the EPR register with +the interrupt vector number and acknowledges the interrupt inside +the interrupt controller. + +In case the interrupt controller lives in user space, we need to do +the interrupt acknowledge cycle through it to fetch the next to be +delivered interrupt vector using this exit. + +It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an +external interrupt has just been delivered into the guest. User space +should put the acknowledged interrupt vector into the 'epr' field. + /* Fix the size of the union. */ char padding[256]; }; @@ -2501,3 +2520,20 @@ handled in-kernel, while the other I/O instructions are passed to userspace. When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST SUBCHANNEL intercepts. + +6.5 KVM_CAP_PPC_EPR + +Architectures: ppc +Parameters: args[0] defines whether the proxy facility is active +Returns: 0 on success; -1 on error + +This capability enables or disables the delivery of interrupts through the +external proxy facility. + +When enabled (args[0] != 0), every time the guest gets an external interrupt +delivered, it automatically exits into user space with a KVM_EXIT_EPR exit +to receive the topmost interrupt vector. + +When disabled (args[0] == 0), behavior is as if this facility is unsupported. + +When this capability is enabled, KVM_EXIT_EPR can occur. diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index ab49c6cf891c..8a72d59467eb 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -520,6 +520,8 @@ struct kvm_vcpu_arch { u8 sane; u8 cpu_type; u8 hcall_needed; + u8 epr_enabled; + u8 epr_needed; u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 5f5f69abd281..493630e209c8 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -264,6 +264,15 @@ static inline void kvm_linear_init(void) {} #endif +static inline void kvmppc_set_epr(struct kvm_vcpu *vcpu, u32 epr) +{ +#ifdef CONFIG_KVM_BOOKE_HV + mtspr(SPRN_GEPR, epr); +#elif defined(CONFIG_BOOKE) + vcpu->arch.epr = epr; +#endif +} + int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu, struct kvm_config_tlb *cfg); int kvm_vcpu_ioctl_dirty_tlb(struct kvm_vcpu *vcpu, diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index 964f4475f55c..940ec806187e 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -306,7 +306,7 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu, { int allowed = 0; ulong msr_mask = 0; - bool update_esr = false, update_dear = false; + bool update_esr = false, update_dear = false, update_epr = false; ulong crit_raw = vcpu->arch.shared->critical; ulong crit_r1 = kvmppc_get_gpr(vcpu, 1); bool crit; @@ -330,6 +330,9 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu, keep_irq = true; } + if ((priority == BOOKE_IRQPRIO_EXTERNAL) && vcpu->arch.epr_enabled) + update_epr = true; + switch (priority) { case BOOKE_IRQPRIO_DTLB_MISS: case BOOKE_IRQPRIO_DATA_STORAGE: @@ -408,6 +411,8 @@ static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu, set_guest_esr(vcpu, vcpu->arch.queued_esr); if (update_dear == true) set_guest_dear(vcpu, vcpu->arch.queued_dear); + if (update_epr == true) + kvm_make_request(KVM_REQ_EPR_EXIT, vcpu); new_msr &= msr_mask; #if defined(CONFIG_64BIT) @@ -615,6 +620,13 @@ int kvmppc_core_check_requests(struct kvm_vcpu *vcpu) r = 0; } + if (kvm_check_request(KVM_REQ_EPR_EXIT, vcpu)) { + vcpu->run->epr.epr = 0; + vcpu->arch.epr_needed = true; + vcpu->run->exit_reason = KVM_EXIT_EPR; + r = 0; + } + return r; } diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index e2225e5b8a4c..934413cd3a1b 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -306,6 +306,7 @@ int kvm_dev_ioctl_check_extension(long ext) #ifdef CONFIG_BOOKE case KVM_CAP_PPC_BOOKE_SREGS: case KVM_CAP_PPC_BOOKE_WATCHDOG: + case KVM_CAP_PPC_EPR: #else case KVM_CAP_PPC_SEGSTATE: case KVM_CAP_PPC_HIOR: @@ -721,6 +722,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) for (i = 0; i < 9; ++i) kvmppc_set_gpr(vcpu, 4 + i, run->papr_hcall.args[i]); vcpu->arch.hcall_needed = 0; +#ifdef CONFIG_BOOKE + } else if (vcpu->arch.epr_needed) { + kvmppc_set_epr(vcpu, run->epr.epr); + vcpu->arch.epr_needed = 0; +#endif } r = kvmppc_vcpu_run(run, vcpu); @@ -762,6 +768,10 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, r = 0; vcpu->arch.papr_enabled = true; break; + case KVM_CAP_PPC_EPR: + r = 0; + vcpu->arch.epr_enabled = cap->args[0]; + break; #ifdef CONFIG_BOOKE case KVM_CAP_PPC_BOOKE_WATCHDOG: r = 0; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index cbe0d683e2e5..4dd7d7531e69 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -122,6 +122,7 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_WATCHDOG 18 #define KVM_REQ_MASTERCLOCK_UPDATE 19 #define KVM_REQ_MCLOCK_INPROGRESS 20 +#define KVM_REQ_EPR_EXIT 21 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1 diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 8bb0bf83afc5..9a2db5767ed5 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -169,6 +169,7 @@ struct kvm_pit_config { #define KVM_EXIT_S390_UCONTROL 20 #define KVM_EXIT_WATCHDOG 21 #define KVM_EXIT_S390_TSCH 22 +#define KVM_EXIT_EPR 23 /* For KVM_EXIT_INTERNAL_ERROR */ /* Emulate instruction failed. */ @@ -295,6 +296,10 @@ struct kvm_run { __u32 ipb; __u8 dequeued; } s390_tsch; + /* KVM_EXIT_EPR */ + struct { + __u32 epr; + } epr; /* Fix the size of the union. */ char padding[256]; }; @@ -656,6 +661,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_PPC_BOOKE_WATCHDOG 83 #define KVM_CAP_PPC_HTAB_FD 84 #define KVM_CAP_S390_CSS_SUPPORT 85 +#define KVM_CAP_PPC_EPR 86 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.3-14-g43fede From ed5982e6ce5f106abcbf071f80730db344a6da42 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 17 Jan 2013 22:23:36 +0100 Subject: drm/i915: Allow userspace to hint that the relocations were known Userspace is able to hint to the kernel that its command stream and auxiliary state buffers already hold the correct presumed addresses and so the relocation process may be skipped if the kernel does not need to move any buffers in preparation for the execbuffer. Thus for the common case where the allotment of buffers is static between batches, we can avoid the overhead of individually checking the relocation entries. Note that this requires userspace to supply the domain tracking and requests for workarounds itself that would otherwise be computed based upon the relocation entries. Using copywinwin10 as an example that is dependent upon emitting a lot of relocations (2 per operation), we see improvements of: c2d/gm45: 618000.0/sec to 632000.0/sec. i3-330m: 748000.0/sec to 830000.0/sec. (measured relative to a baseline with neither optimisations applied). Signed-off-by: Chris Wilson Reviewed-by: Imre Deak [danvet: Fixup merge conflict in userspace header due to different baseline trees.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 3 ++ drivers/gpu/drm/i915/i915_gem_execbuffer.c | 68 ++++++++++++++++++++---------- include/uapi/drm/i915_drm.h | 14 ++++++ 3 files changed, 62 insertions(+), 23 deletions(-) (limited to 'include/uapi') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 6d8a1dc74934..a6e047d533ec 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -992,6 +992,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_PINNED_BATCHES: value = 1; break; + case I915_PARAM_HAS_EXEC_NO_RELOC: + value = 1; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 386677f8fd38..34f6cdffa9f8 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -373,7 +373,8 @@ need_reloc_mappable(struct drm_i915_gem_object *obj) static int i915_gem_execbuffer_reserve_object(struct drm_i915_gem_object *obj, - struct intel_ring_buffer *ring) + struct intel_ring_buffer *ring, + bool *need_reloc) { struct drm_i915_private *dev_priv = obj->base.dev->dev_private; struct drm_i915_gem_exec_object2 *entry = obj->exec_entry; @@ -414,7 +415,20 @@ i915_gem_execbuffer_reserve_object(struct drm_i915_gem_object *obj, obj->has_aliasing_ppgtt_mapping = 1; } - entry->offset = obj->gtt_offset; + if (entry->offset != obj->gtt_offset) { + entry->offset = obj->gtt_offset; + *need_reloc = true; + } + + if (entry->flags & EXEC_OBJECT_WRITE) { + obj->base.pending_read_domains = I915_GEM_DOMAIN_RENDER; + obj->base.pending_write_domain = I915_GEM_DOMAIN_RENDER; + } + + if (entry->flags & EXEC_OBJECT_NEEDS_GTT && + !obj->has_global_gtt_mapping) + i915_gem_gtt_bind_object(obj, obj->cache_level); + return 0; } @@ -440,7 +454,8 @@ i915_gem_execbuffer_unreserve_object(struct drm_i915_gem_object *obj) static int i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, struct drm_file *file, - struct list_head *objects) + struct list_head *objects, + bool *need_relocs) { struct drm_i915_gem_object *obj; struct list_head ordered_objects; @@ -468,7 +483,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, else list_move_tail(&obj->exec_list, &ordered_objects); - obj->base.pending_read_domains = 0; + obj->base.pending_read_domains = I915_GEM_GPU_DOMAINS & ~I915_GEM_DOMAIN_COMMAND; obj->base.pending_write_domain = 0; obj->pending_fenced_gpu_access = false; } @@ -508,7 +523,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, (need_mappable && !obj->map_and_fenceable)) ret = i915_gem_object_unbind(obj); else - ret = i915_gem_execbuffer_reserve_object(obj, ring); + ret = i915_gem_execbuffer_reserve_object(obj, ring, need_relocs); if (ret) goto err; } @@ -518,7 +533,7 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, if (obj->gtt_space) continue; - ret = i915_gem_execbuffer_reserve_object(obj, ring); + ret = i915_gem_execbuffer_reserve_object(obj, ring, need_relocs); if (ret) goto err; } @@ -538,16 +553,18 @@ err: /* Decrement pin count for bound objects */ static int i915_gem_execbuffer_relocate_slow(struct drm_device *dev, + struct drm_i915_gem_execbuffer2 *args, struct drm_file *file, struct intel_ring_buffer *ring, struct eb_objects *eb, - struct drm_i915_gem_exec_object2 *exec, - int count) + struct drm_i915_gem_exec_object2 *exec) { struct drm_i915_gem_relocation_entry *reloc; struct drm_i915_gem_object *obj; + bool need_relocs; int *reloc_offset; int i, total, ret; + int count = args->buffer_count; /* We may process another execbuffer during the unlock... */ while (!list_empty(&eb->objects)) { @@ -602,7 +619,8 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, if (ret) goto err; - ret = i915_gem_execbuffer_reserve(ring, file, &eb->objects); + need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0; + ret = i915_gem_execbuffer_reserve(ring, file, &eb->objects, &need_relocs); if (ret) goto err; @@ -660,6 +678,9 @@ i915_gem_execbuffer_move_to_gpu(struct intel_ring_buffer *ring, static bool i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec) { + if (exec->flags & __I915_EXEC_UNKNOWN_FLAGS) + return false; + return ((exec->batch_start_offset | exec->batch_len) & 0x7) == 0; } @@ -673,6 +694,9 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec, char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr; int length; /* limited by fault_in_pages_readable() */ + if (exec[i].flags & __EXEC_OBJECT_UNKNOWN_FLAGS) + return -EINVAL; + /* First check for malicious input causing overflow */ if (exec[i].relocation_count > INT_MAX / sizeof(struct drm_i915_gem_relocation_entry)) @@ -680,9 +704,6 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec, length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry); - if (!access_ok(VERIFY_READ, ptr, length)) - return -EFAULT; - /* we may also need to update the presumed offsets */ if (!access_ok(VERIFY_WRITE, ptr, length)) return -EFAULT; @@ -704,8 +725,10 @@ i915_gem_execbuffer_move_to_active(struct list_head *objects, u32 old_read = obj->base.read_domains; u32 old_write = obj->base.write_domain; - obj->base.read_domains = obj->base.pending_read_domains; obj->base.write_domain = obj->base.pending_write_domain; + if (obj->base.write_domain == 0) + obj->base.pending_read_domains |= obj->base.read_domains; + obj->base.read_domains = obj->base.pending_read_domains; obj->fenced_gpu_access = obj->pending_fenced_gpu_access; i915_gem_object_move_to_active(obj, ring); @@ -770,14 +793,12 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, struct intel_ring_buffer *ring; u32 ctx_id = i915_execbuffer2_get_context_id(*args); u32 exec_start, exec_len; - u32 mask; - u32 flags; + u32 mask, flags; int ret, mode, i; + bool need_relocs; - if (!i915_gem_check_execbuffer(args)) { - DRM_DEBUG("execbuf with invalid offset/length\n"); + if (!i915_gem_check_execbuffer(args)) return -EINVAL; - } ret = validate_exec_list(exec, args->buffer_count); if (ret) @@ -916,17 +937,18 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, exec_list); /* Move the objects en-masse into the GTT, evicting if necessary. */ - ret = i915_gem_execbuffer_reserve(ring, file, &eb->objects); + need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0; + ret = i915_gem_execbuffer_reserve(ring, file, &eb->objects, &need_relocs); if (ret) goto err; /* The objects are in their final locations, apply the relocations. */ - ret = i915_gem_execbuffer_relocate(dev, eb); + if (need_relocs) + ret = i915_gem_execbuffer_relocate(dev, eb); if (ret) { if (ret == -EFAULT) { - ret = i915_gem_execbuffer_relocate_slow(dev, file, ring, - eb, exec, - args->buffer_count); + ret = i915_gem_execbuffer_relocate_slow(dev, args, file, ring, + eb, exec); BUG_ON(!mutex_is_locked(&dev->struct_mutex)); } if (ret) diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index c4d2e9c74002..2430b6ad6a85 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -308,6 +308,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_RSVD_FOR_FUTURE_USE 22 #define I915_PARAM_HAS_SECURE_BATCHES 23 #define I915_PARAM_HAS_PINNED_BATCHES 24 +#define I915_PARAM_HAS_EXEC_NO_RELOC 25 typedef struct drm_i915_getparam { int param; @@ -628,7 +629,11 @@ struct drm_i915_gem_exec_object2 { __u64 offset; #define EXEC_OBJECT_NEEDS_FENCE (1<<0) +#define EXEC_OBJECT_NEEDS_GTT (1<<1) +#define EXEC_OBJECT_WRITE (1<<2) +#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_WRITE<<1) __u64 flags; + __u64 rsvd1; __u64 rsvd2; }; @@ -687,6 +692,15 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_IS_PINNED (1<<10) +/** Provide a hint to the kernel that the command stream and auxilliary + * state buffers already holds the correct presumed addresses and so the + * relocation process may be skipped if no buffers need to be moved in + * preparation for the execbuffer. + */ +#define I915_EXEC_NO_RELOC (1<<11) + +#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_NO_RELOC<<1) + #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ (eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK -- cgit v1.3-14-g43fede From eef90ccb8a4d50b219a95cc53878ebb007315b32 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 8 Jan 2013 10:53:17 +0000 Subject: drm/i915: Use the reloc.handle as an index into the execbuffer array Using copywinwin10 as an example that is dependent upon emitting a lot of relocations (2 per operation), we see improvements of: c2d/gm45: 618000.0/sec to 623000.0/sec. i3-330m: 748000.0/sec to 789000.0/sec. (measured relative to a baseline with neither optimisations applied). Signed-off-by: Chris Wilson Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_dma.c | 3 + drivers/gpu/drm/i915/i915_gem_execbuffer.c | 100 ++++++++++++++++++----------- include/uapi/drm/i915_drm.h | 8 ++- 3 files changed, 71 insertions(+), 40 deletions(-) (limited to 'include/uapi') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index a6e047d533ec..442118293883 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -995,6 +995,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_EXEC_NO_RELOC: value = 1; break; + case I915_PARAM_HAS_EXEC_HANDLE_LUT: + value = 1; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 34f6cdffa9f8..f5a11ecf5494 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -36,24 +36,40 @@ struct eb_objects { struct list_head objects; int and; - struct hlist_head buckets[0]; + union { + struct drm_i915_gem_object *lut[0]; + struct hlist_head buckets[0]; + }; }; static struct eb_objects * -eb_create(int size) +eb_create(struct drm_i915_gem_execbuffer2 *args) { - struct eb_objects *eb; - int count = PAGE_SIZE / sizeof(struct hlist_head) / 2; - BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head))); - while (count > size) - count >>= 1; - eb = kzalloc(count*sizeof(struct hlist_head) + - sizeof(struct eb_objects), - GFP_KERNEL); - if (eb == NULL) - return eb; - - eb->and = count - 1; + struct eb_objects *eb = NULL; + + if (args->flags & I915_EXEC_HANDLE_LUT) { + int size = args->buffer_count; + size *= sizeof(struct drm_i915_gem_object *); + size += sizeof(struct eb_objects); + eb = kmalloc(size, GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY); + } + + if (eb == NULL) { + int size = args->buffer_count; + int count = PAGE_SIZE / sizeof(struct hlist_head) / 2; + BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head))); + while (count > 2*size) + count >>= 1; + eb = kzalloc(count*sizeof(struct hlist_head) + + sizeof(struct eb_objects), + GFP_TEMPORARY); + if (eb == NULL) + return eb; + + eb->and = count - 1; + } else + eb->and = -args->buffer_count; + INIT_LIST_HEAD(&eb->objects); return eb; } @@ -61,26 +77,20 @@ eb_create(int size) static void eb_reset(struct eb_objects *eb) { - memset(eb->buckets, 0, (eb->and+1)*sizeof(struct hlist_head)); -} - -static void -eb_add_object(struct eb_objects *eb, struct drm_i915_gem_object *obj) -{ - hlist_add_head(&obj->exec_node, - &eb->buckets[obj->exec_handle & eb->and]); + if (eb->and >= 0) + memset(eb->buckets, 0, (eb->and+1)*sizeof(struct hlist_head)); } static int eb_lookup_objects(struct eb_objects *eb, struct drm_i915_gem_exec_object2 *exec, - int count, + const struct drm_i915_gem_execbuffer2 *args, struct drm_file *file) { int i; spin_lock(&file->table_lock); - for (i = 0; i < count; i++) { + for (i = 0; i < args->buffer_count; i++) { struct drm_i915_gem_object *obj; obj = to_intel_bo(idr_find(&file->object_idr, exec[i].handle)); @@ -101,9 +111,15 @@ eb_lookup_objects(struct eb_objects *eb, drm_gem_object_reference(&obj->base); list_add_tail(&obj->exec_list, &eb->objects); - obj->exec_handle = exec[i].handle; obj->exec_entry = &exec[i]; - eb_add_object(eb, obj); + if (eb->and < 0) { + eb->lut[i] = obj; + } else { + uint32_t handle = args->flags & I915_EXEC_HANDLE_LUT ? i : exec[i].handle; + obj->exec_handle = handle; + hlist_add_head(&obj->exec_node, + &eb->buckets[handle & eb->and]); + } } spin_unlock(&file->table_lock); @@ -113,18 +129,24 @@ eb_lookup_objects(struct eb_objects *eb, static struct drm_i915_gem_object * eb_get_object(struct eb_objects *eb, unsigned long handle) { - struct hlist_head *head; - struct hlist_node *node; - struct drm_i915_gem_object *obj; + if (eb->and < 0) { + if (handle >= -eb->and) + return NULL; + return eb->lut[handle]; + } else { + struct hlist_head *head; + struct hlist_node *node; - head = &eb->buckets[handle & eb->and]; - hlist_for_each(node, head) { - obj = hlist_entry(node, struct drm_i915_gem_object, exec_node); - if (obj->exec_handle == handle) - return obj; - } + head = &eb->buckets[handle & eb->and]; + hlist_for_each(node, head) { + struct drm_i915_gem_object *obj; - return NULL; + obj = hlist_entry(node, struct drm_i915_gem_object, exec_node); + if (obj->exec_handle == handle) + return obj; + } + return NULL; + } } static void @@ -615,7 +637,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, /* reacquire the objects */ eb_reset(eb); - ret = eb_lookup_objects(eb, exec, count, file); + ret = eb_lookup_objects(eb, exec, args, file); if (ret) goto err; @@ -919,7 +941,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, goto pre_mutex_err; } - eb = eb_create(args->buffer_count); + eb = eb_create(args); if (eb == NULL) { mutex_unlock(&dev->struct_mutex); ret = -ENOMEM; @@ -927,7 +949,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, } /* Look up object handles */ - ret = eb_lookup_objects(eb, exec, args->buffer_count, file); + ret = eb_lookup_objects(eb, exec, args, file); if (ret) goto err; diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 2430b6ad6a85..07d59419fe6b 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -309,6 +309,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_SECURE_BATCHES 23 #define I915_PARAM_HAS_PINNED_BATCHES 24 #define I915_PARAM_HAS_EXEC_NO_RELOC 25 +#define I915_PARAM_HAS_EXEC_HANDLE_LUT 26 typedef struct drm_i915_getparam { int param; @@ -699,7 +700,12 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_NO_RELOC (1<<11) -#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_NO_RELOC<<1) +/** Use the reloc.handle as an index into the exec object array rather + * than as the per-file handle. + */ +#define I915_EXEC_HANDLE_LUT (1<<12) + +#define __I915_EXEC_UNKNOWN_FLAGS -(I915_EXEC_HANDLE_LUT<<1) #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ -- cgit v1.3-14-g43fede From afe759511808cd5bb508b598007cf0c7b0ca8e08 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Tue, 15 Jan 2013 17:20:58 +0800 Subject: libata: identify and init ZPODD devices The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: Aaron Lu Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 13 ++++++ drivers/ata/Makefile | 1 + drivers/ata/libata-core.c | 4 +- drivers/ata/libata-scsi.c | 2 + drivers/ata/libata-zpodd.c | 100 +++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata.h | 14 +++++++ include/linux/libata.h | 3 ++ include/uapi/linux/cdrom.h | 34 +++++++++++++++ 8 files changed, 170 insertions(+), 1 deletion(-) create mode 100644 drivers/ata/libata-zpodd.c (limited to 'include/uapi') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e08d322d01d7..996d16c9c6e5 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -58,6 +58,19 @@ config ATA_ACPI You can disable this at kernel boot time by using the option libata.noacpi=1 +config SATA_ZPODD + bool "SATA Zero Power ODD Support" + depends on ATA_ACPI + default n + help + This option adds support for SATA ZPODD. It requires both + ODD and the platform support, and if enabled, will automatically + power on/off the ODD when certain condition is satisfied. This + does not impact user's experience of the ODD, only power is saved + when ODD is not in use(i.e. no disc inside). + + If unsure, say N. + config SATA_PMP bool "SATA Port Multiplier support" default y diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 9329dafba91b..85e3de463ed1 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -107,3 +107,4 @@ libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o libata-$(CONFIG_ATA_SFF) += libata-sff.o libata-$(CONFIG_SATA_PMP) += libata-pmp.o libata-$(CONFIG_ATA_ACPI) += libata-acpi.o +libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 275941b576a8..c7ecd8492f1e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2401,8 +2401,10 @@ int ata_dev_configure(struct ata_device *dev) dma_dir_string = ", DMADIR"; } - if (ata_id_has_da(dev->id)) + if (ata_id_has_da(dev->id)) { dev->flags |= ATA_DFLAG_DA; + zpodd_init(dev); + } /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7c337e754dab..1ff018525e3b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3755,6 +3755,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev) mutex_lock(&ap->scsi_host->scan_mutex); spin_lock_irqsave(ap->lock, flags); + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); ata_acpi_unbind(dev); /* clearing dev->sdev is protected by host lock */ diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c new file mode 100644 index 000000000000..27eed2f09a8a --- /dev/null +++ b/drivers/ata/libata-zpodd.c @@ -0,0 +1,100 @@ +#include +#include + +#include "libata.h" + +enum odd_mech_type { + ODD_MECH_TYPE_SLOT, + ODD_MECH_TYPE_DRAWER, + ODD_MECH_TYPE_UNSUPPORTED, +}; + +struct zpodd { + enum odd_mech_type mech_type; /* init during probe, RO afterwards */ + struct ata_device *dev; +}; + +/* Per the spec, only slot type and drawer type ODD can be supported */ +static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) +{ + char buf[16]; + unsigned int ret; + struct rm_feature_desc *desc = (void *)(buf + 8); + struct ata_taskfile tf = {}; + + char cdb[] = { GPCMD_GET_CONFIGURATION, + 2, /* only 1 feature descriptor requested */ + 0, 3, /* 3, removable medium feature */ + 0, 0, 0,/* reserved */ + 0, sizeof(buf), + 0, 0, 0, + }; + + tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf.command = ATA_CMD_PACKET; + tf.protocol = ATAPI_PROT_PIO; + tf.lbam = sizeof(buf); + + ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, + buf, sizeof(buf), 0); + if (ret) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (be16_to_cpu(desc->feature_code) != 3) + return ODD_MECH_TYPE_UNSUPPORTED; + + if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_SLOT; + else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1) + return ODD_MECH_TYPE_DRAWER; + else + return ODD_MECH_TYPE_UNSUPPORTED; +} + +static bool odd_can_poweroff(struct ata_device *ata_dev) +{ + acpi_handle handle; + acpi_status status; + struct acpi_device *acpi_dev; + + handle = ata_dev_acpi_handle(ata_dev); + if (!handle) + return false; + + status = acpi_bus_get_device(handle, &acpi_dev); + if (ACPI_FAILURE(status)) + return false; + + return acpi_device_can_poweroff(acpi_dev); +} + +void zpodd_init(struct ata_device *dev) +{ + enum odd_mech_type mech_type; + struct zpodd *zpodd; + + if (dev->zpodd) + return; + + if (!odd_can_poweroff(dev)) + return; + + mech_type = zpodd_get_mech_type(dev); + if (mech_type == ODD_MECH_TYPE_UNSUPPORTED) + return; + + zpodd = kzalloc(sizeof(struct zpodd), GFP_KERNEL); + if (!zpodd) + return; + + zpodd->mech_type = mech_type; + + zpodd->dev = dev; + dev->zpodd = zpodd; +} + +void zpodd_exit(struct ata_device *dev) +{ + kfree(dev->zpodd); + dev->zpodd = NULL; +} diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 7148a58020b9..a21740b4ee11 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -230,4 +230,18 @@ static inline void ata_sff_exit(void) { } #endif /* CONFIG_ATA_SFF */ +/* libata-zpodd.c */ +#ifdef CONFIG_SATA_ZPODD +void zpodd_init(struct ata_device *dev); +void zpodd_exit(struct ata_device *dev); +static inline bool zpodd_dev_enabled(struct ata_device *dev) +{ + return dev->zpodd != NULL; +} +#else /* CONFIG_SATA_ZPODD */ +static inline void zpodd_init(struct ata_device *dev) {} +static inline void zpodd_exit(struct ata_device *dev) {} +static inline bool zpodd_dev_enabled(struct ata_device *dev) { return false; } +#endif /* CONFIG_SATA_ZPODD */ + #endif /* __LIBATA_H__ */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 7ae207eb29a0..65ff67e34b77 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -620,6 +620,9 @@ struct ata_device { #ifdef CONFIG_ATA_ACPI union acpi_object *gtf_cache; unsigned int gtf_filter; +#endif +#ifdef CONFIG_SATA_ZPODD + void *zpodd; #endif struct device tdev; /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h index 898b866b300c..bd17ad5aa06d 100644 --- a/include/uapi/linux/cdrom.h +++ b/include/uapi/linux/cdrom.h @@ -908,5 +908,39 @@ struct mode_page_header { __be16 desc_length; }; +/* removable medium feature descriptor */ +struct rm_feature_desc { + __be16 feature_code; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 reserved1:2; + __u8 feature_version:4; + __u8 persistent:1; + __u8 curr:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 curr:1; + __u8 persistent:1; + __u8 feature_version:4; + __u8 reserved1:2; +#endif + __u8 add_len; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 mech_type:3; + __u8 load:1; + __u8 eject:1; + __u8 pvnt_jmpr:1; + __u8 dbml:1; + __u8 lock:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 lock:1; + __u8 dbml:1; + __u8 pvnt_jmpr:1; + __u8 eject:1; + __u8 load:1; + __u8 mech_type:3; +#endif + __u8 reserved2; + __u8 reserved3; + __u8 reserved4; +}; #endif /* _UAPI_LINUX_CDROM_H */ -- cgit v1.3-14-g43fede From 9569793a79836320c33d400c686dcb78f886bdad Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Jan 2013 12:22:06 -0300 Subject: [media] dvb: Add DVBv5 statistics properties The DVBv3 statistics parameters are limited on several ways: - It doesn't provide any way to indicate the used measure, so userspace need to guess how to calculate/use it; - Only a limited set of stats are supported; - Can't be called in a way to require them to be filled all at once (atomic reads from the hardware), with may cause troubles on interpreting them on userspace; - On some OFDM delivery systems, the carriers can be independently modulated, having different properties. Currently, there's no way to report per-layer stats. To address the above issues, adding a new DVBv5-based stats API. While here, correct inner code nomenclature on a few places. Reviewed-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbapi.xml | 2 +- Documentation/DocBook/media/dvb/dvbproperty.xml | 180 +++++++++++++++++++++++- Documentation/DocBook/media/dvb/frontend.xml | 2 +- include/uapi/linux/dvb/frontend.h | 79 ++++++++++- include/uapi/linux/dvb/version.h | 2 +- 5 files changed, 260 insertions(+), 5 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml index 757488b24f4f..0197bcc7842d 100644 --- a/Documentation/DocBook/media/dvb/dvbapi.xml +++ b/Documentation/DocBook/media/dvb/dvbapi.xml @@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher LINUX DVB API -Version 5.8 +Version 5.10 &sub-intro; diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 957e3acaae8e..4a5eaeed0b9e 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -7,14 +7,41 @@ the capability ioctls weren't implemented yet via the new way. The typical usage for the FE_GET_PROPERTY/FE_SET_PROPERTY API is to replace the ioctl's were the struct dvb_frontend_parameters were used. +
+DTV stats type + +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 1/1000 dB measures */ + }; +} __packed; + +
+
+DTV stats type + +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __packed; + +
+
DTV property type /* Reserved fields should be set to 0 */ + struct dtv_property { __u32 cmd; + __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; @@ -440,7 +467,7 @@ typedef enum fe_delivery_system { <constant>DTV-ISDBT-LAYER*</constant> parameters ISDB-T channels can be coded hierarchically. As opposed to DVB-T in ISDB-T hierarchical layers can be decoded simultaneously. For that - reason a ISDB-T demodulator has 3 viterbi and 3 reed-solomon-decoders. + reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. ISDB-T has 3 hierarchical layers which each can use a part of the available segments. The total number of segments over all layers has to 13 in ISDB-T. @@ -850,6 +877,147 @@ enum fe_interleaving { use the special macro LNA_AUTO to set LNA auto
+ +
+ Frontend statistics indicators + The values are returned via dtv_property.stat. + If the property is supported, dtv_property.stat.len is bigger than zero. + For most delivery systems, dtv_property.stat.len + will be 1 if the stats is supported, and the properties will + return a single value for each parameter. + It should be noticed, however, that new OFDM delivery systems + like ISDB can use different modulation types for each group of + carriers. On such standards, up to 3 groups of statistics can be + provided, and dtv_property.stat.len is updated + to reflect the "global" metrics, plus one metric per each carrier + group (called "layer" on ISDB). + So, in order to be consistent with other delivery systems, the first + value at dtv_property.stat.dtv_stats + array refers to the global metric. The other elements of the array + represent each layer, starting from layer A(index 1), + layer B (index 2) and so on. + The number of filled elements are stored at dtv_property.stat.len. + Each element of the dtv_property.stat.dtv_stats array consists on two elements: + + svalue or uvalue, where + svalue is for signed values of the measure (dB measures) + and uvalue is for unsigned values (counters, relative scale) + scale - Scale for the value. It can be: +
+ + FE_SCALE_NOT_AVAILABLE - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition) + FE_SCALE_DECIBEL - parameter is a signed value, measured in 1/1000 dB + FE_SCALE_RELATIVE - parameter is a unsigned value, where 0 means 0% and 65535 means 100%. + FE_SCALE_COUNTER - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time. + +
+ + +
+ <constant>DTV_STAT_SIGNAL_STRENGTH</constant> + Indicates the signal strength level at the analog part of the tuner or of the demod. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_DECIBEL - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative. + FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535). + +
+
+ <constant>DTV_STAT_CNR</constant> + Indicates the Signal to Noise ratio for the main carrier. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_DECIBEL - Signal/Noise ratio is in 0.0001 dB units. + FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535). + +
+
+ <constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant> + Measures the number of bit errors before the forward error correction (FEC) on the inner coding block (before Viterbi, LDPC or other inner code). + This measure is taken during the same interval as DTV_STAT_PRE_TOTAL_BIT_COUNT. + In order to get the BER (Bit Error Rate) measurement, it should be divided by + DTV_STAT_PRE_TOTAL_BIT_COUNT. + This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error bits counted before the inner coding. + +
+
+ <constant>DTV_STAT_PRE_TOTAL_BIT_COUNT</constant> + Measures the amount of bits received before the inner code block, during the same period as + DTV_STAT_PRE_ERROR_BIT_COUNT measurement was taken. + It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, + as the frontend may need to manually restart the measurement, loosing some data between each measurement interval. + This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of bits counted while measuring + DTV_STAT_PRE_ERROR_BIT_COUNT. + +
+
+ <constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant> + Measures the number of bit errors after the forward error correction (FEC) done by inner code block (after Viterbi, LDPC or other inner code). + This measure is taken during the same interval as DTV_STAT_POST_TOTAL_BIT_COUNT. + In order to get the BER (Bit Error Rate) measurement, it should be divided by + DTV_STAT_POST_TOTAL_BIT_COUNT. + This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error bits counted after the inner coding. + +
+
+ <constant>DTV_STAT_POST_TOTAL_BIT_COUNT</constant> + Measures the amount of bits received after the inner coding, during the same period as + DTV_STAT_POST_ERROR_BIT_COUNT measurement was taken. + It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, + as the frontend may need to manually restart the measurement, loosing some data between each measurement interval. + This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of bits counted while measuring + DTV_STAT_POST_ERROR_BIT_COUNT. + +
+
+ <constant>DTV_STAT_ERROR_BLOCK_COUNT</constant> + Measures the number of block errors after the outer forward error correction coding (after Reed-Solomon or other outer code). + This measurement is monotonically increased, as the frontend gets more bit count measurements. + The frontend may reset it when a channel/transponder is tuned. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error blocks counted after the outer coding. + +
+
+ <constant>DTV-STAT_TOTAL_BLOCK_COUNT</constant> + Measures the total number of blocks received during the same period as + DTV_STAT_ERROR_BLOCK_COUNT measurement was taken. + It can be used to calculate the PER indicator, by dividing + DTV_STAT_ERROR_BLOCK_COUNT + by DTV-STAT-TOTAL-BLOCK-COUNT. + Possible scales for this metric are: + + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of blocks counted while measuring + DTV_STAT_ERROR_BLOCK_COUNT. + +
+
+
Properties used on terrestrial delivery systems
@@ -871,6 +1039,7 @@ enum fe_interleaving { DTV_HIERARCHY DTV_LNA + In addition, the DTV QoS statistics are also valid.
DVB-T2 delivery system @@ -895,6 +1064,7 @@ enum fe_interleaving { DTV_STREAM_ID DTV_LNA + In addition, the DTV QoS statistics are also valid.
ISDB-T delivery system @@ -948,6 +1118,7 @@ enum fe_interleaving { DTV_ISDBT_LAYERC_SEGMENT_COUNT DTV_ISDBT_LAYERC_TIME_INTERLEAVING + In addition, the DTV QoS statistics are also valid.
ATSC delivery system @@ -961,6 +1132,7 @@ enum fe_interleaving { DTV_MODULATION DTV_BANDWIDTH_HZ + In addition, the DTV QoS statistics are also valid.
ATSC-MH delivery system @@ -988,6 +1160,7 @@ enum fe_interleaving { DTV_ATSCMH_SCCC_CODE_MODE_C DTV_ATSCMH_SCCC_CODE_MODE_D + In addition, the DTV QoS statistics are also valid.
DTMB delivery system @@ -1007,6 +1180,7 @@ enum fe_interleaving { DTV_INTERLEAVING DTV_LNA + In addition, the DTV QoS statistics are also valid.
@@ -1028,6 +1202,7 @@ enum fe_interleaving { DTV_INNER_FEC DTV_LNA + In addition, the DTV QoS statistics are also valid.
DVB-C Annex B delivery system @@ -1043,6 +1218,7 @@ enum fe_interleaving { DTV_INVERSION DTV_LNA + In addition, the DTV QoS statistics are also valid.
@@ -1062,6 +1238,7 @@ enum fe_interleaving { DTV_VOLTAGE DTV_TONE + In addition, the DTV QoS statistics are also valid. Future implementations might add those two missing parameters: DTV_DISEQC_MASTER @@ -1077,6 +1254,7 @@ enum fe_interleaving { DTV_ROLLOFF DTV_STREAM_ID + In addition, the DTV QoS statistics are also valid.
Turbo code delivery system diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index 426c2526a454..df39ba395df0 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -230,7 +230,7 @@ typedef enum fe_status { The frontend has found a DVB signal FE_HAS_VITERBI -The frontend FEC code is stable +The frontend FEC inner coding (Viterbi, LDPC or other inner code) is stable FE_HAS_SYNC Syncronization bytes was found diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h index c12d452cb40d..c56d77c496a5 100644 --- a/include/uapi/linux/dvb/frontend.h +++ b/include/uapi/linux/dvb/frontend.h @@ -365,7 +365,17 @@ struct dvb_frontend_event { #define DTV_INTERLEAVING 60 #define DTV_LNA 61 -#define DTV_MAX_COMMAND DTV_LNA +/* Quality parameters */ +#define DTV_STAT_SIGNAL_STRENGTH 62 +#define DTV_STAT_CNR 63 +#define DTV_STAT_PRE_ERROR_BIT_COUNT 64 +#define DTV_STAT_PRE_TOTAL_BIT_COUNT 65 +#define DTV_STAT_POST_ERROR_BIT_COUNT 66 +#define DTV_STAT_POST_TOTAL_BIT_COUNT 67 +#define DTV_STAT_ERROR_BLOCK_COUNT 68 +#define DTV_STAT_TOTAL_BLOCK_COUNT 69 + +#define DTV_MAX_COMMAND DTV_STAT_TOTAL_BLOCK_COUNT typedef enum fe_pilot { PILOT_ON, @@ -452,11 +462,78 @@ struct dtv_cmds_h { __u32 reserved:30; /* Align */ }; +/** + * Scale types for the quality parameters. + * @FE_SCALE_NOT_AVAILABLE: That QoS measure is not available. That + * could indicate a temporary or a permanent + * condition. + * @FE_SCALE_DECIBEL: The scale is measured in 0.0001 dB steps, typically + * used on signal measures. + * @FE_SCALE_RELATIVE: The scale is a relative percentual measure, + * ranging from 0 (0%) to 0xffff (100%). + * @FE_SCALE_COUNTER: The scale counts the occurrence of an event, like + * bit error, block error, lapsed time. + */ +enum fecap_scale_params { + FE_SCALE_NOT_AVAILABLE = 0, + FE_SCALE_DECIBEL, + FE_SCALE_RELATIVE, + FE_SCALE_COUNTER +}; + +/** + * struct dtv_stats - Used for reading a DTV status property + * + * @value: value of the measure. Should range from 0 to 0xffff; + * @scale: Filled with enum fecap_scale_params - the scale + * in usage for that parameter + * + * For most delivery systems, this will return a single value for each + * parameter. + * It should be noticed, however, that new OFDM delivery systems like + * ISDB can use different modulation types for each group of carriers. + * On such standards, up to 8 groups of statistics can be provided, one + * for each carrier group (called "layer" on ISDB). + * In order to be consistent with other delivery systems, the first + * value refers to the entire set of carriers ("global"). + * dtv_status:scale should use the value FE_SCALE_NOT_AVAILABLE when + * the value for the entire group of carriers or from one specific layer + * is not provided by the hardware. + * st.len should be filled with the latest filled status + 1. + * + * In other words, for ISDB, those values should be filled like: + * u.st.stat.svalue[0] = global statistics; + * u.st.stat.scale[0] = FE_SCALE_DECIBELS; + * u.st.stat.value[1] = layer A statistics; + * u.st.stat.scale[1] = FE_SCALE_NOT_AVAILABLE (if not available); + * u.st.stat.svalue[2] = layer B statistics; + * u.st.stat.scale[2] = FE_SCALE_DECIBELS; + * u.st.stat.svalue[3] = layer C statistics; + * u.st.stat.scale[3] = FE_SCALE_DECIBELS; + * u.st.len = 4; + */ +struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 0.0001 dB measures */ + }; +} __attribute__ ((packed)); + + +#define MAX_DTV_STATS 4 + +struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; +} __attribute__ ((packed)); + struct dtv_property { __u32 cmd; __u32 reserved[3]; union { __u32 data; + struct dtv_fe_stats st; struct { __u8 data[32]; __u32 len; diff --git a/include/uapi/linux/dvb/version.h b/include/uapi/linux/dvb/version.h index 827cce7e33e3..e53e2ad4444f 100644 --- a/include/uapi/linux/dvb/version.h +++ b/include/uapi/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 +#define DVB_API_VERSION_MINOR 10 #endif /*_DVBVERSION_H_*/ -- cgit v1.3-14-g43fede From 92a3ce4a1e0047215aa0a0b30cc333bd32b866a8 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Nov 2012 21:20:05 -0500 Subject: consolidate declarations of k_sigaction Only alpha and sparc are unusual - they have ka_restorer in it. And nobody needs that exposed to userland. Signed-off-by: Al Viro --- arch/alpha/include/asm/signal.h | 5 +---- arch/arm/include/asm/signal.h | 4 ---- arch/avr32/include/asm/signal.h | 4 ---- arch/cris/include/asm/signal.h | 3 --- arch/h8300/include/asm/signal.h | 4 ---- arch/ia64/include/asm/signal.h | 4 ---- arch/m32r/include/asm/signal.h | 3 --- arch/m68k/include/asm/signal.h | 3 --- arch/mips/include/uapi/asm/signal.h | 4 ---- arch/mn10300/include/asm/signal.h | 3 --- arch/parisc/include/asm/signal.h | 4 ---- arch/powerpc/include/uapi/asm/signal.h | 4 ---- arch/s390/include/asm/signal.h | 4 ---- arch/sparc/include/asm/signal.h | 5 +---- arch/x86/include/asm/signal.h | 5 ----- arch/x86/include/uapi/asm/signal.h | 4 ---- arch/xtensa/include/asm/signal.h | 4 ---- include/linux/signal.h | 7 +++++++ include/uapi/asm-generic/signal.h | 4 ---- 19 files changed, 9 insertions(+), 69 deletions(-) (limited to 'include/uapi') diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h index 8a1ac28cd562..8c06bd1dfffc 100644 --- a/arch/alpha/include/asm/signal.h +++ b/arch/alpha/include/asm/signal.h @@ -28,9 +28,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; - __sigrestore_t ka_restorer; -}; +#define __ARCH_HAS_KA_RESTORER #include #endif diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 9a0ea6ab988f..58057023ff60 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -30,9 +30,5 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #include #endif diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h index 9326d182e9e5..c8858f0cef3d 100644 --- a/arch/avr32/include/asm/signal.h +++ b/arch/avr32/include/asm/signal.h @@ -30,10 +30,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/cris/include/asm/signal.h b/arch/cris/include/asm/signal.h index c0cb1fd4644c..b0cd904ecd8a 100644 --- a/arch/cris/include/asm/signal.h +++ b/arch/cris/include/asm/signal.h @@ -30,9 +30,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; #include #endif diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h index 66c81c67e55d..c05f937bb492 100644 --- a/arch/h8300/include/asm/signal.h +++ b/arch/h8300/include/asm/signal.h @@ -30,10 +30,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h index 3a1b20e74c5c..a0d5f00ec8db 100644 --- a/arch/ia64/include/asm/signal.h +++ b/arch/ia64/include/asm/signal.h @@ -32,10 +32,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - # include # endif /* !__ASSEMBLY__ */ diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h index a5ba4a217fb9..4699405f9f82 100644 --- a/arch/m32r/include/asm/signal.h +++ b/arch/m32r/include/asm/signal.h @@ -23,9 +23,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h index 9c8c46b06b0c..1edd5f358c0f 100644 --- a/arch/m68k/include/asm/signal.h +++ b/arch/m68k/include/asm/signal.h @@ -30,9 +30,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; #include #ifndef CONFIG_CPU_HAS_NO_BITFIELDS diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h index 770732cb8d03..3c85fa07b3d3 100644 --- a/arch/mips/include/uapi/asm/signal.h +++ b/arch/mips/include/uapi/asm/signal.h @@ -102,10 +102,6 @@ struct sigaction { sigset_t sa_mask; }; -struct k_sigaction { - struct sigaction sa; -}; - /* IRIX compatible stack_t */ typedef struct sigaltstack { void __user *ss_sp; diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h index d280e9780793..d6f06540acb0 100644 --- a/arch/mn10300/include/asm/signal.h +++ b/arch/mn10300/include/asm/signal.h @@ -40,9 +40,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; #include #endif /* _ASM_SIGNAL_H */ diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index 0fdb3c835952..e42e05d69a1d 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -30,10 +30,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #include #endif /* !__ASSEMBLY */ diff --git a/arch/powerpc/include/uapi/asm/signal.h b/arch/powerpc/include/uapi/asm/signal.h index e079fb39d5bc..a1a624699292 100644 --- a/arch/powerpc/include/uapi/asm/signal.h +++ b/arch/powerpc/include/uapi/asm/signal.h @@ -104,10 +104,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - typedef struct sigaltstack { void __user *ss_sp; int ss_flags; diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h index db7ddfaf5b79..89853592e492 100644 --- a/arch/s390/include/asm/signal.h +++ b/arch/s390/include/asm/signal.h @@ -35,8 +35,4 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #endif diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h index 77b85850d543..e1881856a55c 100644 --- a/arch/sparc/include/asm/signal.h +++ b/arch/sparc/include/asm/signal.h @@ -21,10 +21,7 @@ */ #define SA_STATIC_ALLOC 0x8000 -struct k_sigaction { - struct __new_sigaction sa; - void __user *ka_restorer; -}; +#define __ARCH_HAS_KA_RESTORER #endif /* !(__ASSEMBLY__) */ #endif /* !(__SPARC_SIGNAL_H) */ diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h index 216bf364a7e7..e7cf5005931a 100644 --- a/arch/x86/include/asm/signal.h +++ b/arch/x86/include/asm/signal.h @@ -46,11 +46,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - -#else /* __i386__ */ #endif /* !__i386__ */ #include diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h index aa7d6ae39e0e..e52443fc026b 100644 --- a/arch/x86/include/uapi/asm/signal.h +++ b/arch/x86/include/uapi/asm/signal.h @@ -122,10 +122,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #endif /* !__i386__ */ typedef struct sigaltstack { diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h index 6f586bd90e18..fd63b8f46a4b 100644 --- a/arch/xtensa/include/asm/signal.h +++ b/arch/xtensa/include/asm/signal.h @@ -22,10 +22,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - #include #endif /* __ASSEMBLY__ */ diff --git a/include/linux/signal.h b/include/linux/signal.h index ed1e71f1aac7..01451a156ff7 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -249,6 +249,13 @@ extern void __set_current_blocked(const sigset_t *); extern int show_unhandled_signals; extern int sigsuspend(sigset_t *); +struct k_sigaction { + struct sigaction sa; +#ifdef __ARCH_HAS_KA_RESTORER + __sigrestore_t ka_restorer; +#endif +}; + extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie); extern void signal_delivered(int sig, siginfo_t *info, struct k_sigaction *ka, struct pt_regs *regs, int stepping); extern void exit_signals(struct task_struct *tsk); diff --git a/include/uapi/asm-generic/signal.h b/include/uapi/asm-generic/signal.h index 6fae30fd16ab..21e59f36c61b 100644 --- a/include/uapi/asm-generic/signal.h +++ b/include/uapi/asm-generic/signal.h @@ -102,10 +102,6 @@ struct sigaction { sigset_t sa_mask; /* mask last for extensibility */ }; -struct k_sigaction { - struct sigaction sa; -}; - typedef struct sigaltstack { void __user *ss_sp; int ss_flags; -- cgit v1.3-14-g43fede From 574c4866e33d648520a8bd5bf6f573ea6e554e88 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 25 Nov 2012 22:24:19 -0500 Subject: consolidate kernel-side struct sigaction declarations Signed-off-by: Al Viro --- arch/alpha/include/asm/signal.h | 6 ------ arch/arm/include/asm/signal.h | 7 +------ arch/avr32/include/asm/signal.h | 7 +------ arch/cris/include/asm/signal.h | 7 +------ arch/h8300/include/asm/signal.h | 7 +------ arch/ia64/include/asm/signal.h | 6 ------ arch/ia64/include/asm/unistd.h | 1 - arch/m32r/include/asm/signal.h | 8 +------- arch/m68k/include/asm/signal.h | 7 +------ arch/mips/include/asm/signal.h | 2 ++ arch/mips/include/uapi/asm/signal.h | 2 ++ arch/mn10300/include/asm/signal.h | 7 +------ arch/parisc/include/asm/signal.h | 2 ++ arch/powerpc/include/asm/signal.h | 1 + arch/powerpc/include/asm/syscalls.h | 1 - arch/powerpc/include/uapi/asm/signal.h | 2 ++ arch/s390/include/asm/signal.h | 8 +------- arch/sparc/include/asm/signal.h | 1 + arch/sparc/include/uapi/asm/signal.h | 2 ++ arch/sparc/kernel/systbls.h | 2 +- arch/x86/include/asm/signal.h | 10 +++------- arch/x86/include/uapi/asm/signal.h | 4 ++-- arch/xtensa/include/asm/signal.h | 7 +------ include/linux/signal.h | 14 ++++++++++++++ include/linux/syscalls.h | 2 +- include/uapi/asm-generic/signal.h | 6 ++++++ 26 files changed, 48 insertions(+), 81 deletions(-) (limited to 'include/uapi') diff --git a/arch/alpha/include/asm/signal.h b/arch/alpha/include/asm/signal.h index 8c06bd1dfffc..963f0494dca7 100644 --- a/arch/alpha/include/asm/signal.h +++ b/arch/alpha/include/asm/signal.h @@ -22,12 +22,6 @@ struct osf_sigaction { int sa_flags; }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; - #define __ARCH_HAS_KA_RESTORER #include #endif diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 58057023ff60..a5076b9bd463 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -23,12 +23,7 @@ struct old_sigaction { __sigrestore_t sa_restorer; }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include #endif diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h index c8858f0cef3d..d875eb6a3f3c 100644 --- a/arch/avr32/include/asm/signal.h +++ b/arch/avr32/include/asm/signal.h @@ -23,12 +23,7 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/cris/include/asm/signal.h b/arch/cris/include/asm/signal.h index b0cd904ecd8a..b3650ab2c320 100644 --- a/arch/cris/include/asm/signal.h +++ b/arch/cris/include/asm/signal.h @@ -23,12 +23,7 @@ struct old_sigaction { void (*sa_restorer)(void); }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include diff --git a/arch/h8300/include/asm/signal.h b/arch/h8300/include/asm/signal.h index c05f937bb492..9b18a0959461 100644 --- a/arch/h8300/include/asm/signal.h +++ b/arch/h8300/include/asm/signal.h @@ -23,12 +23,7 @@ struct old_sigaction { void (*sa_restorer)(void); }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h index a0d5f00ec8db..c62afa4a0dc2 100644 --- a/arch/ia64/include/asm/signal.h +++ b/arch/ia64/include/asm/signal.h @@ -26,12 +26,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - sigset_t sa_mask; /* mask last for extensibility */ -}; - # include # endif /* !__ASSEMBLY__ */ diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index bfbb109458be..c827049eb62c 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -47,7 +47,6 @@ asmlinkage unsigned long sys_mmap2( int prot, int flags, int fd, long pgoff); struct pt_regs; -struct sigaction; asmlinkage long sys_ia64_pipe(void); /* diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h index 4699405f9f82..ed3ded6601e8 100644 --- a/arch/m32r/include/asm/signal.h +++ b/arch/m32r/include/asm/signal.h @@ -16,13 +16,7 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - +#define __ARCH_HAS_SA_RESTORER #include #undef __HAVE_ARCH_SIG_BITOPS diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h index 1edd5f358c0f..c7b4fb1fa14d 100644 --- a/arch/m68k/include/asm/signal.h +++ b/arch/m68k/include/asm/signal.h @@ -23,12 +23,7 @@ struct old_sigaction { __sigrestore_t sa_restorer; }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include diff --git a/arch/mips/include/asm/signal.h b/arch/mips/include/asm/signal.h index cf4a08062d1d..197f6367c201 100644 --- a/arch/mips/include/asm/signal.h +++ b/arch/mips/include/asm/signal.h @@ -21,4 +21,6 @@ #include #include +#define __ARCH_HAS_ODD_SIGACTION + #endif /* _ASM_SIGNAL_H */ diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h index 3c85fa07b3d3..6783c887a678 100644 --- a/arch/mips/include/uapi/asm/signal.h +++ b/arch/mips/include/uapi/asm/signal.h @@ -96,11 +96,13 @@ typedef unsigned long old_sigset_t; /* at least 32 bits */ #include +#ifndef __KERNEL__ struct sigaction { unsigned int sa_flags; __sighandler_t sa_handler; sigset_t sa_mask; }; +#endif /* IRIX compatible stack_t */ typedef struct sigaltstack { diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h index d6f06540acb0..288ade5ec94e 100644 --- a/arch/mn10300/include/asm/signal.h +++ b/arch/mn10300/include/asm/signal.h @@ -33,12 +33,7 @@ struct old_sigaction { __sigrestore_t sa_restorer; }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index e42e05d69a1d..c8e4ec5a6582 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -24,11 +24,13 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; +#ifndef __KERNEL__ struct sigaction { __sighandler_t sa_handler; unsigned long sa_flags; sigset_t sa_mask; /* mask last for extensibility */ }; +#endif #include diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h index a101637725a2..fbe66c463891 100644 --- a/arch/powerpc/include/asm/signal.h +++ b/arch/powerpc/include/asm/signal.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_SIGNAL_H #define _ASM_POWERPC_SIGNAL_H +#define __ARCH_HAS_SA_RESTORER #include #endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h index 5c51659e61d5..21936530df08 100644 --- a/arch/powerpc/include/asm/syscalls.h +++ b/arch/powerpc/include/asm/syscalls.h @@ -9,7 +9,6 @@ struct pt_regs; struct rtas_args; -struct sigaction; asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, unsigned long prot, unsigned long flags, diff --git a/arch/powerpc/include/uapi/asm/signal.h b/arch/powerpc/include/uapi/asm/signal.h index a1a624699292..6defdd65594e 100644 --- a/arch/powerpc/include/uapi/asm/signal.h +++ b/arch/powerpc/include/uapi/asm/signal.h @@ -97,12 +97,14 @@ struct old_sigaction { __sigrestore_t sa_restorer; }; +#ifndef __KERNEL__ struct sigaction { __sighandler_t sa_handler; unsigned long sa_flags; __sigrestore_t sa_restorer; sigset_t sa_mask; /* mask last for extensibility */ }; +#endif typedef struct sigaltstack { void __user *ss_sp; diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h index 89853592e492..d26e30e31656 100644 --- a/arch/s390/include/asm/signal.h +++ b/arch/s390/include/asm/signal.h @@ -28,11 +28,5 @@ struct old_sigaction { void (*sa_restorer)(void); }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - +#define __ARCH_HAS_SA_RESTORER #endif diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h index e1881856a55c..c33ce3f2ba84 100644 --- a/arch/sparc/include/asm/signal.h +++ b/arch/sparc/include/asm/signal.h @@ -22,6 +22,7 @@ #define SA_STATIC_ALLOC 0x8000 #define __ARCH_HAS_KA_RESTORER +#define __ARCH_HAS_SA_RESTORER #endif /* !(__ASSEMBLY__) */ #endif /* !(__SPARC_SIGNAL_H) */ diff --git a/arch/sparc/include/uapi/asm/signal.h b/arch/sparc/include/uapi/asm/signal.h index c4ffd6c97106..284836f0b7dc 100644 --- a/arch/sparc/include/uapi/asm/signal.h +++ b/arch/sparc/include/uapi/asm/signal.h @@ -153,12 +153,14 @@ struct sigstack { #include +#ifndef __KERNEL__ struct __new_sigaction { __sighandler_t sa_handler; unsigned long sa_flags; __sigrestore_t sa_restorer; /* not used by Linux/SPARC yet */ __new_sigset_t sa_mask; }; +#endif struct __old_sigaction { __sighandler_t sa_handler; diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h index 118759cd7342..1dd89dbac8d8 100644 --- a/arch/sparc/kernel/systbls.h +++ b/arch/sparc/kernel/systbls.h @@ -3,8 +3,8 @@ #include #include +#include #include -#include extern asmlinkage unsigned long sys_getpagesize(void); extern asmlinkage long sparc_pipe(struct pt_regs *regs); diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h index e7cf5005931a..9bda8224f3d5 100644 --- a/arch/x86/include/asm/signal.h +++ b/arch/x86/include/asm/signal.h @@ -31,6 +31,9 @@ typedef sigset_t compat_sigset_t; #include #ifndef __ASSEMBLY__ extern void do_notify_resume(struct pt_regs *, void *, __u32); + +#define __ARCH_HAS_SA_RESTORER + #ifdef __i386__ struct old_sigaction { __sighandler_t sa_handler; @@ -39,13 +42,6 @@ struct old_sigaction { __sigrestore_t sa_restorer; }; -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - #endif /* !__i386__ */ #include diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h index e52443fc026b..8264f47cf53e 100644 --- a/arch/x86/include/uapi/asm/signal.h +++ b/arch/x86/include/uapi/asm/signal.h @@ -95,9 +95,9 @@ typedef unsigned long sigset_t; #ifndef __ASSEMBLY__ -#ifdef __i386__ # ifndef __KERNEL__ /* Here we must cater to libcs that poke about in kernel headers. */ +#ifdef __i386__ struct sigaction { union { @@ -112,7 +112,6 @@ struct sigaction { #define sa_handler _u._sa_handler #define sa_sigaction _u._sa_sigaction -# endif /* ! __KERNEL__ */ #else /* __i386__ */ struct sigaction { @@ -123,6 +122,7 @@ struct sigaction { }; #endif /* !__i386__ */ +# endif /* ! __KERNEL__ */ typedef struct sigaltstack { void __user *ss_sp; diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h index fd63b8f46a4b..de169b4eaeef 100644 --- a/arch/xtensa/include/asm/signal.h +++ b/arch/xtensa/include/asm/signal.h @@ -15,12 +15,7 @@ #include #ifndef __ASSEMBLY__ -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; +#define __ARCH_HAS_SA_RESTORER #include diff --git a/include/linux/signal.h b/include/linux/signal.h index 01451a156ff7..0b6878e882da 100644 --- a/include/linux/signal.h +++ b/include/linux/signal.h @@ -249,6 +249,20 @@ extern void __set_current_blocked(const sigset_t *); extern int show_unhandled_signals; extern int sigsuspend(sigset_t *); +struct sigaction { +#ifndef __ARCH_HAS_ODD_SIGACTION + __sighandler_t sa_handler; + unsigned long sa_flags; +#else + unsigned long sa_flags; + __sighandler_t sa_handler; +#endif +#ifdef __ARCH_HAS_SA_RESTORER + __sigrestore_t sa_restorer; +#endif + sigset_t sa_mask; /* mask last for extensibility */ +}; + struct k_sigaction { struct sigaction sa; #ifdef __ARCH_HAS_KA_RESTORER diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index d2dd2f63d220..1c4938bf901e 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -68,11 +68,11 @@ struct sigaltstack; #include #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/include/uapi/asm-generic/signal.h b/include/uapi/asm-generic/signal.h index 21e59f36c61b..9df61f1edb0f 100644 --- a/include/uapi/asm-generic/signal.h +++ b/include/uapi/asm-generic/signal.h @@ -93,6 +93,11 @@ typedef unsigned long old_sigset_t; #include +#ifdef SA_RESTORER +#define __ARCH_HAS_SA_RESTORER +#endif + +#ifndef __KERNEL__ struct sigaction { __sighandler_t sa_handler; unsigned long sa_flags; @@ -101,6 +106,7 @@ struct sigaction { #endif sigset_t sa_mask; /* mask last for extensibility */ }; +#endif typedef struct sigaltstack { void __user *ss_sp; -- cgit v1.3-14-g43fede From 03e275959850f51754d3952489c36f4b1410856d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 25 Dec 2012 13:58:56 -0500 Subject: tile: switch to generic compat rt_sig{procmask,pending}() note that the only systems that are going to care are big-endian 64bit ones with 32bit compat enabled - little-endian bitmaps are not sensitive to granularity. Signed-off-by: Al Viro --- arch/tile/Kconfig | 2 ++ include/uapi/asm-generic/unistd.h | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'include/uapi') diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index dae6ac1eac62..cf33ba4992bb 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -22,6 +22,8 @@ config TILE select GENERIC_CLOCKEVENTS select MODULES_USE_ELF_RELA select GENERIC_SIGALTSTACK + select GENERIC_COMPAT_RT_SIGPROCMASK + select GENERIC_COMPAT_RT_SIGPENDING # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index 2c531f478410..0cc74c4403e4 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -402,9 +402,9 @@ __SC_COMP(__NR_rt_sigsuspend, sys_rt_sigsuspend, compat_sys_rt_sigsuspend) #define __NR_rt_sigaction 134 __SC_COMP(__NR_rt_sigaction, sys_rt_sigaction, compat_sys_rt_sigaction) #define __NR_rt_sigprocmask 135 -__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask) +__SC_COMP(__NR_rt_sigprocmask, sys_rt_sigprocmask, compat_sys_rt_sigprocmask) #define __NR_rt_sigpending 136 -__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending) +__SC_COMP(__NR_rt_sigpending, sys_rt_sigpending, compat_sys_rt_sigpending) #define __NR_rt_sigtimedwait 137 __SC_COMP(__NR_rt_sigtimedwait, sys_rt_sigtimedwait, \ compat_sys_rt_sigtimedwait) -- cgit v1.3-14-g43fede From 2ccbe779bcdee130ea7f1525670dc9d60318a981 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 19 Jan 2013 15:51:55 -0300 Subject: [media] v4l2-ctrl: Add helper function for the controls range update This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by: Sylwester Nawrocki Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 4 + Documentation/DocBook/media/v4l/v4l2.xml | 4 +- Documentation/DocBook/media/v4l/vidioc-dqevent.xml | 6 + drivers/media/v4l2-core/v4l2-ctrls.c | 143 +++++++++++++++------ include/media/v4l2-ctrls.h | 20 +++ include/uapi/linux/videodev2.h | 1 + 6 files changed, 138 insertions(+), 40 deletions(-) (limited to 'include/uapi') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index ebd2bfd1ee8e..104a1a2b8849 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2486,6 +2486,10 @@ that used it. It was originally scheduled for removal in 2.6.35. v4l2_buffer. See . + + Added V4L2_EVENT_CTRL_CH_RANGE control event + changes flag. See . +
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 8fe29427c8e4..c3851a2fb50d 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -142,10 +142,12 @@ applications. --> 3.9 2012-12-03 - sa + sa, sn Added timestamp types to v4l2_buffer, see . + Added V4L2_EVENT_CTRL_CH_RANGE control + event changes flag, see . diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index 98a856f9ec30..89891adb928a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -261,6 +261,12 @@ This control event was triggered because the control flags changed. + + V4L2_EVENT_CTRL_CH_RANGE + 0x0004 + This control event was triggered because the minimum, + maximum, step or the default value of the control changed. + diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c index 7b486ac3f4d9..3f27571b814d 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1158,8 +1158,7 @@ static int new_to_user(struct v4l2_ext_control *c, } /* Copy the new value to the current value. */ -static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, - bool update_inactive) +static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, u32 ch_flags) { bool changed = false; @@ -1183,8 +1182,8 @@ static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, ctrl->cur.val = ctrl->val; break; } - if (update_inactive) { - /* Note: update_inactive can only be true for auto clusters. */ + if (ch_flags & V4L2_EVENT_CTRL_CH_FLAGS) { + /* Note: CH_FLAGS is only set for auto clusters. */ ctrl->flags &= ~(V4L2_CTRL_FLAG_INACTIVE | V4L2_CTRL_FLAG_VOLATILE); if (!is_cur_manual(ctrl->cluster[0])) { @@ -1194,14 +1193,13 @@ static void new_to_cur(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, } fh = NULL; } - if (changed || update_inactive) { + if (changed || ch_flags) { /* If a control was changed that was not one of the controls modified by the application, then send the event to all. */ if (!ctrl->is_new) fh = NULL; send_event(fh, ctrl, - (changed ? V4L2_EVENT_CTRL_CH_VALUE : 0) | - (update_inactive ? V4L2_EVENT_CTRL_CH_FLAGS : 0)); + (changed ? V4L2_EVENT_CTRL_CH_VALUE : 0) | ch_flags); if (ctrl->call_notify && changed && ctrl->handler->notify) ctrl->handler->notify(ctrl, ctrl->handler->notify_priv); } @@ -1257,6 +1255,41 @@ static int cluster_changed(struct v4l2_ctrl *master) return diff; } +/* Control range checking */ +static int check_range(enum v4l2_ctrl_type type, + s32 min, s32 max, u32 step, s32 def) +{ + switch (type) { + case V4L2_CTRL_TYPE_BOOLEAN: + if (step != 1 || max > 1 || min < 0) + return -ERANGE; + /* fall through */ + case V4L2_CTRL_TYPE_INTEGER: + if (step <= 0 || min > max || def < min || def > max) + return -ERANGE; + return 0; + case V4L2_CTRL_TYPE_BITMASK: + if (step || min || !max || (def & ~max)) + return -ERANGE; + return 0; + case V4L2_CTRL_TYPE_MENU: + case V4L2_CTRL_TYPE_INTEGER_MENU: + if (min > max || def < min || def > max) + return -ERANGE; + /* Note: step == menu_skip_mask for menu controls. + So here we check if the default value is masked out. */ + if (step && ((1 << def) & step)) + return -EINVAL; + return 0; + case V4L2_CTRL_TYPE_STRING: + if (min > max || min < 0 || step < 1 || def) + return -ERANGE; + return 0; + default: + return 0; + } +} + /* Validate a new control */ static int validate_new(const struct v4l2_ctrl *ctrl, struct v4l2_ext_control *c) @@ -1529,30 +1562,21 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl, { struct v4l2_ctrl *ctrl; unsigned sz_extra = 0; + int err; if (hdl->error) return NULL; /* Sanity checks */ if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE || - (type == V4L2_CTRL_TYPE_INTEGER && step == 0) || - (type == V4L2_CTRL_TYPE_BITMASK && max == 0) || (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) || - (type == V4L2_CTRL_TYPE_INTEGER_MENU && qmenu_int == NULL) || - (type == V4L2_CTRL_TYPE_STRING && max == 0)) { - handler_set_err(hdl, -ERANGE); - return NULL; - } - if (type != V4L2_CTRL_TYPE_BITMASK && max < min) { + (type == V4L2_CTRL_TYPE_INTEGER_MENU && qmenu_int == NULL)) { handler_set_err(hdl, -ERANGE); return NULL; } - if ((type == V4L2_CTRL_TYPE_INTEGER || - type == V4L2_CTRL_TYPE_MENU || - type == V4L2_CTRL_TYPE_INTEGER_MENU || - type == V4L2_CTRL_TYPE_BOOLEAN) && - (def < min || def > max)) { - handler_set_err(hdl, -ERANGE); + err = check_range(type, min, max, step, def); + if (err) { + handler_set_err(hdl, err); return NULL; } if (type == V4L2_CTRL_TYPE_BITMASK && ((def & ~max) || min || step)) { @@ -2426,8 +2450,8 @@ EXPORT_SYMBOL(v4l2_ctrl_g_ctrl_int64); /* Core function that calls try/s_ctrl and ensures that the new value is copied to the current value on a set. Must be called with ctrl->handler->lock held. */ -static int try_or_set_cluster(struct v4l2_fh *fh, - struct v4l2_ctrl *master, bool set) +static int try_or_set_cluster(struct v4l2_fh *fh, struct v4l2_ctrl *master, + bool set, u32 ch_flags) { bool update_flag; int ret; @@ -2465,7 +2489,8 @@ static int try_or_set_cluster(struct v4l2_fh *fh, /* If OK, then make the new values permanent. */ update_flag = is_cur_manual(master) != is_new_manual(master); for (i = 0; i < master->ncontrols; i++) - new_to_cur(fh, master->cluster[i], update_flag && i > 0); + new_to_cur(fh, master->cluster[i], ch_flags | + ((update_flag && i > 0) ? V4L2_EVENT_CTRL_CH_FLAGS : 0)); return 0; } @@ -2592,7 +2617,7 @@ static int try_set_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, } while (!ret && idx); if (!ret) - ret = try_or_set_cluster(fh, master, set); + ret = try_or_set_cluster(fh, master, set, 0); /* Copy the new values back to userspace. */ if (!ret) { @@ -2638,10 +2663,9 @@ EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls); /* Helper function for VIDIOC_S_CTRL compatibility */ static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, - struct v4l2_ext_control *c) + struct v4l2_ext_control *c, u32 ch_flags) { struct v4l2_ctrl *master = ctrl->cluster[0]; - int ret; int i; /* String controls are not supported. The user_to_new() and @@ -2651,12 +2675,6 @@ static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, if (ctrl->type == V4L2_CTRL_TYPE_STRING) return -EINVAL; - ret = validate_new(ctrl, c); - if (ret) - return ret; - - v4l2_ctrl_lock(ctrl); - /* Reset the 'is_new' flags of the cluster */ for (i = 0; i < master->ncontrols; i++) if (master->cluster[i]) @@ -2670,10 +2688,22 @@ static int set_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, update_from_auto_cluster(master); user_to_new(c, ctrl); - ret = try_or_set_cluster(fh, master, true); - cur_to_user(c, ctrl); + return try_or_set_cluster(fh, master, true, ch_flags); +} - v4l2_ctrl_unlock(ctrl); +/* Helper function for VIDIOC_S_CTRL compatibility */ +static int set_ctrl_lock(struct v4l2_fh *fh, struct v4l2_ctrl *ctrl, + struct v4l2_ext_control *c) +{ + int ret = validate_new(ctrl, c); + + if (!ret) { + v4l2_ctrl_lock(ctrl); + ret = set_ctrl(fh, ctrl, c, 0); + if (!ret) + cur_to_user(c, ctrl); + v4l2_ctrl_unlock(ctrl); + } return ret; } @@ -2691,7 +2721,7 @@ int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, return -EACCES; c.value = control->value; - ret = set_ctrl(fh, ctrl, &c); + ret = set_ctrl_lock(fh, ctrl, &c); control->value = c.value; return ret; } @@ -2710,7 +2740,7 @@ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val) /* It's a driver bug if this happens. */ WARN_ON(!type_is_int(ctrl)); c.value = val; - return set_ctrl(NULL, ctrl, &c); + return set_ctrl_lock(NULL, ctrl, &c); } EXPORT_SYMBOL(v4l2_ctrl_s_ctrl); @@ -2721,7 +2751,7 @@ int v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val) /* It's a driver bug if this happens. */ WARN_ON(ctrl->type != V4L2_CTRL_TYPE_INTEGER64); c.value64 = val; - return set_ctrl(NULL, ctrl, &c); + return set_ctrl_lock(NULL, ctrl, &c); } EXPORT_SYMBOL(v4l2_ctrl_s_ctrl_int64); @@ -2741,6 +2771,41 @@ void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl, v4l2_ctrl_notify_fnc notify, void } EXPORT_SYMBOL(v4l2_ctrl_notify); +int v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl, + s32 min, s32 max, u32 step, s32 def) +{ + int ret = check_range(ctrl->type, min, max, step, def); + struct v4l2_ext_control c; + + switch (ctrl->type) { + case V4L2_CTRL_TYPE_INTEGER: + case V4L2_CTRL_TYPE_BOOLEAN: + case V4L2_CTRL_TYPE_MENU: + case V4L2_CTRL_TYPE_INTEGER_MENU: + case V4L2_CTRL_TYPE_BITMASK: + if (ret) + return ret; + break; + default: + return -EINVAL; + } + v4l2_ctrl_lock(ctrl); + ctrl->minimum = min; + ctrl->maximum = max; + ctrl->step = step; + ctrl->default_value = def; + c.value = ctrl->cur.val; + if (validate_new(ctrl, &c)) + c.value = def; + if (c.value != ctrl->cur.val) + ret = set_ctrl(NULL, ctrl, &c, V4L2_EVENT_CTRL_CH_RANGE); + else + send_event(NULL, ctrl, V4L2_EVENT_CTRL_CH_RANGE); + v4l2_ctrl_unlock(ctrl); + return ret; +} +EXPORT_SYMBOL(v4l2_ctrl_modify_range); + static int v4l2_ctrl_add_event(struct v4l2_subscribed_event *sev, unsigned elems) { struct v4l2_ctrl *ctrl = v4l2_ctrl_find(sev->fh->ctrl_handler, sev->id); diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index c4cc04136074..91125b6f05a5 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -518,6 +518,26 @@ void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); */ void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed); +/** v4l2_ctrl_modify_range() - Update the range of a control. + * @ctrl: The control to update. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value + * @def: The control's default value. + * + * Update the range of a control on the fly. This works for control types + * INTEGER, BOOLEAN, MENU, INTEGER MENU and BITMASK. For menu controls the + * @step value is interpreted as a menu_skip_mask. + * + * An error is returned if one of the range arguments is invalid for this + * control type. + * + * This function assumes that the control handler is not locked and will + * take the lock itself. + */ +int v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl, + s32 min, s32 max, u32 step, s32 def); + /** v4l2_ctrl_lock() - Helper function to lock the handler * associated with the control. * @ctrl: The control to lock. diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 94cbe26e9f00..928799c2e2d9 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -1822,6 +1822,7 @@ struct v4l2_event_vsync { /* Payload for V4L2_EVENT_CTRL */ #define V4L2_EVENT_CTRL_CH_VALUE (1 << 0) #define V4L2_EVENT_CTRL_CH_FLAGS (1 << 1) +#define V4L2_EVENT_CTRL_CH_RANGE (1 << 2) struct v4l2_event_ctrl { __u32 changes; -- cgit v1.3-14-g43fede From 28718152e0a78085297ec7705f53869e41d1ae73 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 24 Jan 2013 04:42:05 -0300 Subject: [media] Move DV-class control IDs from videodev2.h to v4l2-controls.h When the control IDs were split off from videodev2.h to v4l2-controls.h these new Digital Video controls were forgotten (the two patches may have crossed one another). Move these controls to their proper place in v4l2-controls.h. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/uapi/linux/v4l2-controls.h | 24 ++++++++++++++++++++++++ include/uapi/linux/videodev2.h | 22 ---------------------- 2 files changed, 24 insertions(+), 22 deletions(-) (limited to 'include/uapi') diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 4dc0822700fe..0bece06792d7 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -778,6 +778,7 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17) #define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18) + /* Image source controls */ #define V4L2_CID_IMAGE_SOURCE_CLASS_BASE (V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900) #define V4L2_CID_IMAGE_SOURCE_CLASS (V4L2_CTRL_CLASS_IMAGE_SOURCE | 1) @@ -796,4 +797,27 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) #define V4L2_CID_TEST_PATTERN (V4L2_CID_IMAGE_PROC_CLASS_BASE + 3) + +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + #endif diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 928799c2e2d9..234d1d870914 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -1354,28 +1354,6 @@ struct v4l2_querymenu { #define V4L2_CID_PRIVATE_BASE 0x08000000 -/* DV-class control IDs defined by V4L2 */ -#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) -#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) - -#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) -#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) -#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) -#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) -enum v4l2_dv_tx_mode { - V4L2_DV_TX_MODE_DVI_D = 0, - V4L2_DV_TX_MODE_HDMI = 1, -}; -#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) -enum v4l2_dv_rgb_range { - V4L2_DV_RGB_RANGE_AUTO = 0, - V4L2_DV_RGB_RANGE_LIMITED = 1, - V4L2_DV_RGB_RANGE_FULL = 2, -}; - -#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) -#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) - /* * T U N I N G */ -- cgit v1.3-14-g43fede From ed986d1fee77bbbb62291a1db1c7edbb00d99515 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 29 Jan 2013 07:21:02 -0300 Subject: [media] meye: convert to the control framework Convert the meye driver to the control framework. Some private controls have been replaced with standardized controls (SHARPNESS and JPEGQUAL). The AGC control looks like it can be replaced by the AUTOGAIN control, but it isn't a boolean so I do not know how to interpret it. The FRAMERATE control looks like it can be replaced by S_PARM, but again, without knowing how to interpret it I decided to leave it alone. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/meye/meye.c | 278 ++++++++++++------------------------- drivers/media/pci/meye/meye.h | 2 + include/uapi/linux/meye.h | 8 +- include/uapi/linux/v4l2-controls.h | 5 + 4 files changed, 99 insertions(+), 194 deletions(-) (limited to 'include/uapi') diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c index 3b39deaa8f6b..7859c43479d7 100644 --- a/drivers/media/pci/meye/meye.c +++ b/drivers/media/pci/meye/meye.c @@ -35,6 +35,8 @@ #include #include #include +#include +#include #include #include #include @@ -865,7 +867,7 @@ static int meye_open(struct file *file) meye.grab_buffer[i].state = MEYE_BUF_UNUSED; kfifo_reset(&meye.grabq); kfifo_reset(&meye.doneq); - return 0; + return v4l2_fh_open(file); } static int meye_release(struct file *file) @@ -873,7 +875,7 @@ static int meye_release(struct file *file) mchip_hic_stop(); mchip_dma_free(); clear_bit(0, &meye.in_use); - return 0; + return v4l2_fh_release(file); } static int meyeioc_g_params(struct meye_params *p) @@ -1032,8 +1034,9 @@ static int vidioc_querycap(struct file *file, void *fh, cap->version = (MEYE_DRIVER_MAJORVERSION << 8) + MEYE_DRIVER_MINORVERSION; - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; return 0; } @@ -1063,191 +1066,50 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int i) return 0; } -static int vidioc_queryctrl(struct file *file, void *fh, - struct v4l2_queryctrl *c) -{ - switch (c->id) { - - case V4L2_CID_BRIGHTNESS: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Brightness"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_HUE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Hue"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_CONTRAST: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Contrast"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_SATURATION: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Saturation"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - c->flags = 0; - break; - case V4L2_CID_AGC: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Agc"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 48; - c->flags = 0; - break; - case V4L2_CID_MEYE_SHARPNESS: - case V4L2_CID_SHARPNESS: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Sharpness"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 32; - - /* Continue to report legacy private SHARPNESS ctrl but - * say it is disabled in preference to ctrl in the spec - */ - c->flags = (c->id == V4L2_CID_SHARPNESS) ? 0 : - V4L2_CTRL_FLAG_DISABLED; - break; - case V4L2_CID_PICTURE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Picture"); - c->minimum = 0; - c->maximum = 63; - c->step = 1; - c->default_value = 0; - c->flags = 0; - break; - case V4L2_CID_JPEGQUAL: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "JPEG quality"); - c->minimum = 0; - c->maximum = 10; - c->step = 1; - c->default_value = 8; - c->flags = 0; - break; - case V4L2_CID_FRAMERATE: - c->type = V4L2_CTRL_TYPE_INTEGER; - strcpy(c->name, "Framerate"); - c->minimum = 0; - c->maximum = 31; - c->step = 1; - c->default_value = 0; - c->flags = 0; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) +static int meye_s_ctrl(struct v4l2_ctrl *ctrl) { mutex_lock(&meye.lock); - switch (c->id) { + switch (ctrl->id) { case V4L2_CID_BRIGHTNESS: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, c->value); - meye.brightness = c->value << 10; + SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, ctrl->val); + meye.brightness = ctrl->val << 10; break; case V4L2_CID_HUE: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAHUE, c->value); - meye.hue = c->value << 10; + SONY_PIC_COMMAND_SETCAMERAHUE, ctrl->val); + meye.hue = ctrl->val << 10; break; case V4L2_CID_CONTRAST: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACONTRAST, c->value); - meye.contrast = c->value << 10; + SONY_PIC_COMMAND_SETCAMERACONTRAST, ctrl->val); + meye.contrast = ctrl->val << 10; break; case V4L2_CID_SATURATION: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERACOLOR, c->value); - meye.colour = c->value << 10; + SONY_PIC_COMMAND_SETCAMERACOLOR, ctrl->val); + meye.colour = ctrl->val << 10; break; - case V4L2_CID_AGC: + case V4L2_CID_MEYE_AGC: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAAGC, c->value); - meye.params.agc = c->value; + SONY_PIC_COMMAND_SETCAMERAAGC, ctrl->val); + meye.params.agc = ctrl->val; break; case V4L2_CID_SHARPNESS: - case V4L2_CID_MEYE_SHARPNESS: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERASHARPNESS, c->value); - meye.params.sharpness = c->value; + SONY_PIC_COMMAND_SETCAMERASHARPNESS, ctrl->val); + meye.params.sharpness = ctrl->val; break; - case V4L2_CID_PICTURE: + case V4L2_CID_MEYE_PICTURE: sony_pic_camera_command( - SONY_PIC_COMMAND_SETCAMERAPICTURE, c->value); - meye.params.picture = c->value; + SONY_PIC_COMMAND_SETCAMERAPICTURE, ctrl->val); + meye.params.picture = ctrl->val; break; - case V4L2_CID_JPEGQUAL: - meye.params.quality = c->value; + case V4L2_CID_JPEG_COMPRESSION_QUALITY: + meye.params.quality = ctrl->val; break; - case V4L2_CID_FRAMERATE: - meye.params.framerate = c->value; - break; - default: - mutex_unlock(&meye.lock); - return -EINVAL; - } - mutex_unlock(&meye.lock); - - return 0; -} - -static int vidioc_g_ctrl(struct file *file, void *fh, struct v4l2_control *c) -{ - mutex_lock(&meye.lock); - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value = meye.brightness >> 10; - break; - case V4L2_CID_HUE: - c->value = meye.hue >> 10; - break; - case V4L2_CID_CONTRAST: - c->value = meye.contrast >> 10; - break; - case V4L2_CID_SATURATION: - c->value = meye.colour >> 10; - break; - case V4L2_CID_AGC: - c->value = meye.params.agc; - break; - case V4L2_CID_SHARPNESS: - case V4L2_CID_MEYE_SHARPNESS: - c->value = meye.params.sharpness; - break; - case V4L2_CID_PICTURE: - c->value = meye.params.picture; - break; - case V4L2_CID_JPEGQUAL: - c->value = meye.params.quality; - break; - case V4L2_CID_FRAMERATE: - c->value = meye.params.framerate; + case V4L2_CID_MEYE_FRAMERATE: + meye.params.framerate = ctrl->val; break; default: mutex_unlock(&meye.lock); @@ -1577,12 +1439,12 @@ static long vidioc_default(struct file *file, void *fh, bool valid_prio, static unsigned int meye_poll(struct file *file, poll_table *wait) { - unsigned int res = 0; + unsigned int res = v4l2_ctrl_poll(file, wait); mutex_lock(&meye.lock); poll_wait(file, &meye.proc_list, wait); if (kfifo_len(&meye.doneq)) - res = POLLIN | POLLRDNORM; + res |= POLLIN | POLLRDNORM; mutex_unlock(&meye.lock); return res; } @@ -1669,9 +1531,6 @@ static const struct v4l2_ioctl_ops meye_ioctl_ops = { .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, @@ -1682,6 +1541,9 @@ static const struct v4l2_ioctl_ops meye_ioctl_ops = { .vidioc_dqbuf = vidioc_dqbuf, .vidioc_streamon = vidioc_streamon, .vidioc_streamoff = vidioc_streamoff, + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, .vidioc_default = vidioc_default, }; @@ -1692,6 +1554,10 @@ static struct video_device meye_template = { .release = video_device_release, }; +static const struct v4l2_ctrl_ops meye_ctrl_ops = { + .s_ctrl = meye_s_ctrl, +}; + #ifdef CONFIG_PM static int meye_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -1730,6 +1596,32 @@ static int meye_resume(struct pci_dev *pdev) static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) { + static const struct v4l2_ctrl_config ctrl_agc = { + .id = V4L2_CID_MEYE_AGC, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "AGC", + .max = 63, + .step = 1, + .def = 48, + .flags = V4L2_CTRL_FLAG_SLIDER, + }; + static const struct v4l2_ctrl_config ctrl_picture = { + .id = V4L2_CID_MEYE_PICTURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "Picture", + .max = 63, + .step = 1, + }; + static const struct v4l2_ctrl_config ctrl_framerate = { + .id = V4L2_CID_MEYE_FRAMERATE, + .type = V4L2_CTRL_TYPE_INTEGER, + .ops = &meye_ctrl_ops, + .name = "Framerate", + .max = 31, + .step = 1, + }; struct v4l2_device *v4l2_dev = &meye.v4l2_dev; int ret = -EBUSY; unsigned long mchip_adr; @@ -1833,24 +1725,31 @@ static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) mutex_init(&meye.lock); init_waitqueue_head(&meye.proc_list); - meye.brightness = 32 << 10; - meye.hue = 32 << 10; - meye.colour = 32 << 10; - meye.contrast = 32 << 10; - meye.params.subsample = 0; - meye.params.quality = 8; - meye.params.sharpness = 32; - meye.params.agc = 48; - meye.params.picture = 0; - meye.params.framerate = 0; - - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERABRIGHTNESS, 32); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAHUE, 32); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACOLOR, 32); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERACONTRAST, 32); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERASHARPNESS, 32); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0); - sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48); + + v4l2_ctrl_handler_init(&meye.hdl, 3); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_HUE, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_CONTRAST, 0, 63, 1, 32); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_SATURATION, 0, 63, 1, 32); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_agc, NULL); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_SHARPNESS, 0, 63, 1, 32); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_picture, NULL); + v4l2_ctrl_new_std(&meye.hdl, &meye_ctrl_ops, + V4L2_CID_JPEG_COMPRESSION_QUALITY, 0, 10, 1, 8); + v4l2_ctrl_new_custom(&meye.hdl, &ctrl_framerate, NULL); + if (meye.hdl.error) { + v4l2_err(v4l2_dev, "couldn't register controls\n"); + goto outvideoreg; + } + + v4l2_ctrl_handler_setup(&meye.hdl); + meye.vdev->ctrl_handler = &meye.hdl; + set_bit(V4L2_FL_USE_FH_PRIO, &meye.vdev->flags); if (video_register_device(meye.vdev, VFL_TYPE_GRABBER, video_nr) < 0) { @@ -1866,6 +1765,7 @@ static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent) return 0; outvideoreg: + v4l2_ctrl_handler_free(&meye.hdl); free_irq(meye.mchip_irq, meye_irq); outreqirq: iounmap(meye.mchip_mmregs); diff --git a/drivers/media/pci/meye/meye.h b/drivers/media/pci/meye/meye.h index 4bdeb03f1644..6fed9274cfa5 100644 --- a/drivers/media/pci/meye/meye.h +++ b/drivers/media/pci/meye/meye.h @@ -39,6 +39,7 @@ #include #include #include +#include /****************************************************************************/ /* Motion JPEG chip registers */ @@ -290,6 +291,7 @@ struct meye_grab_buffer { /* Motion Eye device structure */ struct meye { struct v4l2_device v4l2_dev; /* Main v4l2_device struct */ + struct v4l2_ctrl_handler hdl; struct pci_dev *mchip_dev; /* pci device */ u8 mchip_irq; /* irq */ u8 mchip_mode; /* actual mchip mode: HIC_MODE... */ diff --git a/include/uapi/linux/meye.h b/include/uapi/linux/meye.h index 0dd49954f746..8ff50fe9e481 100644 --- a/include/uapi/linux/meye.h +++ b/include/uapi/linux/meye.h @@ -57,10 +57,8 @@ struct meye_params { #define MEYEIOC_STILLJCAPT _IOR ('v', BASE_VIDIOC_PRIVATE+5, int) /* V4L2 private controls */ -#define V4L2_CID_AGC V4L2_CID_PRIVATE_BASE -#define V4L2_CID_MEYE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 1) -#define V4L2_CID_PICTURE (V4L2_CID_PRIVATE_BASE + 2) -#define V4L2_CID_JPEGQUAL (V4L2_CID_PRIVATE_BASE + 3) -#define V4L2_CID_FRAMERATE (V4L2_CID_PRIVATE_BASE + 4) +#define V4L2_CID_MEYE_AGC (V4L2_CID_USER_MEYE_BASE + 0) +#define V4L2_CID_MEYE_PICTURE (V4L2_CID_USER_MEYE_BASE + 1) +#define V4L2_CID_MEYE_FRAMERATE (V4L2_CID_USER_MEYE_BASE + 2) #endif diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 0bece06792d7..dcd63745e83a 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -140,6 +140,11 @@ enum v4l2_colorfx { /* last CID + 1 */ #define V4L2_CID_LASTP1 (V4L2_CID_BASE+43) +/* USER-class private control IDs */ + +/* The base for the meye driver controls. See linux/meye.h for the list + * of controls. We reserve 16 controls for this driver. */ +#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000) /* MPEG-class control IDs */ -- cgit v1.3-14-g43fede From 8bb0daffb0b8e45188066255b4203446eae181f1 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 11 Feb 2013 12:43:09 -0500 Subject: drm/omap: move out of staging Now that the omapdss interface has been reworked so that omapdrm can use dispc directly, we have been able to fix the remaining functional kms issues with omapdrm. And in the mean time the PM sequencing and many other of that open issues have been solved. So I think it makes sense to finally move omapdrm out of staging. Signed-off-by: Rob Clark --- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/omapdrm/Kconfig | 25 + drivers/gpu/drm/omapdrm/Makefile | 24 + drivers/gpu/drm/omapdrm/TODO | 23 + drivers/gpu/drm/omapdrm/omap_connector.c | 298 ++++++ drivers/gpu/drm/omapdrm/omap_crtc.c | 659 ++++++++++++ drivers/gpu/drm/omapdrm/omap_debugfs.c | 139 +++ drivers/gpu/drm/omapdrm/omap_dmm_priv.h | 188 ++++ drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 991 ++++++++++++++++++ drivers/gpu/drm/omapdrm/omap_dmm_tiler.h | 141 +++ drivers/gpu/drm/omapdrm/omap_drv.c | 610 +++++++++++ drivers/gpu/drm/omapdrm/omap_drv.h | 333 ++++++ drivers/gpu/drm/omapdrm/omap_encoder.c | 170 ++++ drivers/gpu/drm/omapdrm/omap_fb.c | 472 +++++++++ drivers/gpu/drm/omapdrm/omap_fbdev.c | 402 ++++++++ drivers/gpu/drm/omapdrm/omap_gem.c | 1511 ++++++++++++++++++++++++++++ drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c | 225 +++++ drivers/gpu/drm/omapdrm/omap_gem_helpers.c | 169 ++++ drivers/gpu/drm/omapdrm/omap_irq.c | 322 ++++++ drivers/gpu/drm/omapdrm/omap_plane.c | 450 +++++++++ drivers/gpu/drm/omapdrm/tcm-sita.c | 703 +++++++++++++ drivers/gpu/drm/omapdrm/tcm-sita.h | 95 ++ drivers/gpu/drm/omapdrm/tcm.h | 328 ++++++ drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/omapdrm/Kconfig | 25 - drivers/staging/omapdrm/Makefile | 24 - drivers/staging/omapdrm/TODO | 32 - drivers/staging/omapdrm/omap_connector.c | 298 ------ drivers/staging/omapdrm/omap_crtc.c | 659 ------------ drivers/staging/omapdrm/omap_debugfs.c | 139 --- drivers/staging/omapdrm/omap_dmm_priv.h | 188 ---- drivers/staging/omapdrm/omap_dmm_tiler.c | 991 ------------------ drivers/staging/omapdrm/omap_dmm_tiler.h | 141 --- drivers/staging/omapdrm/omap_drm.h | 123 --- drivers/staging/omapdrm/omap_drv.c | 610 ----------- drivers/staging/omapdrm/omap_drv.h | 333 ------ drivers/staging/omapdrm/omap_encoder.c | 170 ---- drivers/staging/omapdrm/omap_fb.c | 472 --------- drivers/staging/omapdrm/omap_fbdev.c | 402 -------- drivers/staging/omapdrm/omap_gem.c | 1511 ---------------------------- drivers/staging/omapdrm/omap_gem_dmabuf.c | 225 ----- drivers/staging/omapdrm/omap_gem_helpers.c | 169 ---- drivers/staging/omapdrm/omap_irq.c | 322 ------ drivers/staging/omapdrm/omap_plane.c | 450 --------- drivers/staging/omapdrm/tcm-sita.c | 703 ------------- drivers/staging/omapdrm/tcm-sita.h | 95 -- drivers/staging/omapdrm/tcm.h | 328 ------ include/uapi/drm/omap_drm.h | 123 +++ 50 files changed, 8404 insertions(+), 8413 deletions(-) create mode 100644 drivers/gpu/drm/omapdrm/Kconfig create mode 100644 drivers/gpu/drm/omapdrm/Makefile create mode 100644 drivers/gpu/drm/omapdrm/TODO create mode 100644 drivers/gpu/drm/omapdrm/omap_connector.c create mode 100644 drivers/gpu/drm/omapdrm/omap_crtc.c create mode 100644 drivers/gpu/drm/omapdrm/omap_debugfs.c create mode 100644 drivers/gpu/drm/omapdrm/omap_dmm_priv.h create mode 100644 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c create mode 100644 drivers/gpu/drm/omapdrm/omap_dmm_tiler.h create mode 100644 drivers/gpu/drm/omapdrm/omap_drv.c create mode 100644 drivers/gpu/drm/omapdrm/omap_drv.h create mode 100644 drivers/gpu/drm/omapdrm/omap_encoder.c create mode 100644 drivers/gpu/drm/omapdrm/omap_fb.c create mode 100644 drivers/gpu/drm/omapdrm/omap_fbdev.c create mode 100644 drivers/gpu/drm/omapdrm/omap_gem.c create mode 100644 drivers/gpu/drm/omapdrm/omap_gem_dmabuf.c create mode 100644 drivers/gpu/drm/omapdrm/omap_gem_helpers.c create mode 100644 drivers/gpu/drm/omapdrm/omap_irq.c create mode 100644 drivers/gpu/drm/omapdrm/omap_plane.c create mode 100644 drivers/gpu/drm/omapdrm/tcm-sita.c create mode 100644 drivers/gpu/drm/omapdrm/tcm-sita.h create mode 100644 drivers/gpu/drm/omapdrm/tcm.h delete mode 100644 drivers/staging/omapdrm/Kconfig delete mode 100644 drivers/staging/omapdrm/Makefile delete mode 100644 drivers/staging/omapdrm/TODO delete mode 100644 drivers/staging/omapdrm/omap_connector.c delete mode 100644 drivers/staging/omapdrm/omap_crtc.c delete mode 100644 drivers/staging/omapdrm/omap_debugfs.c delete mode 100644 drivers/staging/omapdrm/omap_dmm_priv.h delete mode 100644 drivers/staging/omapdrm/omap_dmm_tiler.c delete mode 100644 drivers/staging/omapdrm/omap_dmm_tiler.h delete mode 100644 drivers/staging/omapdrm/omap_drm.h delete mode 100644 drivers/staging/omapdrm/omap_drv.c delete mode 100644 drivers/staging/omapdrm/omap_drv.h delete mode 100644 drivers/staging/omapdrm/omap_encoder.c delete mode 100644 drivers/staging/omapdrm/omap_fb.c delete mode 100644 drivers/staging/omapdrm/omap_fbdev.c delete mode 100644 drivers/staging/omapdrm/omap_gem.c delete mode 100644 drivers/staging/omapdrm/omap_gem_dmabuf.c delete mode 100644 drivers/staging/omapdrm/omap_gem_helpers.c delete mode 100644 drivers/staging/omapdrm/omap_irq.c delete mode 100644 drivers/staging/omapdrm/omap_plane.c delete mode 100644 drivers/staging/omapdrm/tcm-sita.c delete mode 100644 drivers/staging/omapdrm/tcm-sita.h delete mode 100644 drivers/staging/omapdrm/tcm.h create mode 100644 include/uapi/drm/omap_drm.h (limited to 'include/uapi') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index ed9e3af17b31..0ce5f52ac56e 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -215,3 +215,5 @@ source "drivers/gpu/drm/cirrus/Kconfig" source "drivers/gpu/drm/shmobile/Kconfig" source "drivers/gpu/drm/tegra/Kconfig" + +source "drivers/gpu/drm/omapdrm/Kconfig" diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 6f58c81cfcbc..b6b43cbc18e4 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -50,4 +50,5 @@ obj-$(CONFIG_DRM_UDL) += udl/ obj-$(CONFIG_DRM_AST) += ast/ obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/ obj-$(CONFIG_DRM_TEGRA) += tegra/ +obj-$(CONFIG_DRM_OMAP) += omapdrm/ obj-y += i2c/ diff --git a/drivers/gpu/drm/omapdrm/Kconfig b/drivers/gpu/drm/omapdrm/Kconfig new file mode 100644 index 000000000000..b724a4131435 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/Kconfig @@ -0,0 +1,25 @@ + +config DRM_OMAP + tristate "OMAP DRM" + depends on DRM && !CONFIG_FB_OMAP2 + depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM + select DRM_KMS_HELPER + select OMAP2_DSS + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + default n + help + DRM display driver for OMAP2/3/4 based boards. + +config DRM_OMAP_NUM_CRTCS + int "Number of CRTCs" + range 1 10 + default 1 if ARCH_OMAP2 || ARCH_OMAP3 + default 2 if ARCH_OMAP4 + depends on DRM_OMAP + help + Select the number of video overlays which can be used as framebuffers. + The remaining overlays are reserved for video. + diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile new file mode 100644 index 000000000000..d85e058f2845 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/Makefile @@ -0,0 +1,24 @@ +# +# Makefile for the drm device driver. This driver provides support for the +# Direct Rendering Infrastructure (DRI) +# + +ccflags-y := -Iinclude/drm -Werror +omapdrm-y := omap_drv.o \ + omap_irq.o \ + omap_debugfs.o \ + omap_crtc.o \ + omap_plane.o \ + omap_encoder.o \ + omap_connector.o \ + omap_fb.o \ + omap_fbdev.o \ + omap_gem.o \ + omap_gem_dmabuf.o \ + omap_dmm_tiler.o \ + tcm-sita.o + +# temporary: +omapdrm-y += omap_gem_helpers.o + +obj-$(CONFIG_DRM_OMAP) += omapdrm.o diff --git a/drivers/gpu/drm/omapdrm/TODO b/drivers/gpu/drm/omapdrm/TODO new file mode 100644 index 000000000000..4d8c18aa5dd7 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/TODO @@ -0,0 +1,23 @@ +TODO +. Where should we do eviction (detatch_pages())? We aren't necessarily + accessing the pages via a GART, so maybe we need some other threshold + to put a cap on the # of pages that can be pin'd. + . Use mm_shrinker to trigger unpinning pages. + . This is mainly theoretical since most of these devices don't actually + have swap or harddrive. +. GEM/shmem backed pages can have existing mappings (kernel linear map, + etc..), which isn't really ideal. +. Revisit GEM sync object infrastructure.. TTM has some framework for this + already. Possibly this could be refactored out and made more common? + There should be some way to do this with less wheel-reinvention. + . This can be handled by the dma-buf fence/reservation stuff when it + lands + +Userspace: +. git://anongit.freedesktop.org/xorg/driver/xf86-video-omap + +Currently tested on +. OMAP3530 beagleboard +. OMAP4430 pandaboard +. OMAP4460 pandaboard +. OMAP5432 uEVM diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c new file mode 100644 index 000000000000..44284fd981fc --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_connector.c @@ -0,0 +1,298 @@ +/* + * drivers/gpu/drm/omapdrm/omap_connector.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +/* + * connector funcs + */ + +#define to_omap_connector(x) container_of(x, struct omap_connector, base) + +struct omap_connector { + struct drm_connector base; + struct omap_dss_device *dssdev; + struct drm_encoder *encoder; +}; + +void copy_timings_omap_to_drm(struct drm_display_mode *mode, + struct omap_video_timings *timings) +{ + mode->clock = timings->pixel_clock; + + mode->hdisplay = timings->x_res; + mode->hsync_start = mode->hdisplay + timings->hfp; + mode->hsync_end = mode->hsync_start + timings->hsw; + mode->htotal = mode->hsync_end + timings->hbp; + + mode->vdisplay = timings->y_res; + mode->vsync_start = mode->vdisplay + timings->vfp; + mode->vsync_end = mode->vsync_start + timings->vsw; + mode->vtotal = mode->vsync_end + timings->vbp; + + mode->flags = 0; + + if (timings->interlace) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; +} + +void copy_timings_drm_to_omap(struct omap_video_timings *timings, + struct drm_display_mode *mode) +{ + timings->pixel_clock = mode->clock; + + timings->x_res = mode->hdisplay; + timings->hfp = mode->hsync_start - mode->hdisplay; + timings->hsw = mode->hsync_end - mode->hsync_start; + timings->hbp = mode->htotal - mode->hsync_end; + + timings->y_res = mode->vdisplay; + timings->vfp = mode->vsync_start - mode->vdisplay; + timings->vsw = mode->vsync_end - mode->vsync_start; + timings->vbp = mode->vtotal - mode->vsync_end; + + timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; + timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; + timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; +} + +static enum drm_connector_status omap_connector_detect( + struct drm_connector *connector, bool force) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + enum drm_connector_status ret; + + if (dssdrv->detect) { + if (dssdrv->detect(dssdev)) + ret = connector_status_connected; + else + ret = connector_status_disconnected; + } else { + ret = connector_status_unknown; + } + + VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force); + + return ret; +} + +static void omap_connector_destroy(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + + DBG("%s", omap_connector->dssdev->name); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(omap_connector); + + omap_dss_put_device(dssdev); +} + +#define MAX_EDID 512 + +static int omap_connector_get_modes(struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct drm_device *dev = connector->dev; + int n = 0; + + DBG("%s", omap_connector->dssdev->name); + + /* if display exposes EDID, then we parse that in the normal way to + * build table of supported modes.. otherwise (ie. fixed resolution + * LCD panels) we just return a single mode corresponding to the + * currently configured timings: + */ + if (dssdrv->read_edid) { + void *edid = kzalloc(MAX_EDID, GFP_KERNEL); + + if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) && + drm_edid_is_valid(edid)) { + drm_mode_connector_update_edid_property( + connector, edid); + n = drm_add_edid_modes(connector, edid); + } else { + drm_mode_connector_update_edid_property( + connector, NULL); + } + kfree(edid); + } else { + struct drm_display_mode *mode = drm_mode_create(dev); + struct omap_video_timings timings = {0}; + + dssdrv->get_timings(dssdev, &timings); + + copy_timings_omap_to_drm(mode, &timings); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + n = 1; + } + + return n; +} + +static int omap_connector_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + struct omap_dss_device *dssdev = omap_connector->dssdev; + struct omap_dss_driver *dssdrv = dssdev->driver; + struct omap_video_timings timings = {0}; + struct drm_device *dev = connector->dev; + struct drm_display_mode *new_mode; + int ret = MODE_BAD; + + copy_timings_drm_to_omap(&timings, mode); + mode->vrefresh = drm_mode_vrefresh(mode); + + if (!dssdrv->check_timings(dssdev, &timings)) { + /* check if vrefresh is still valid */ + new_mode = drm_mode_duplicate(dev, mode); + new_mode->clock = timings.pixel_clock; + new_mode->vrefresh = 0; + if (mode->vrefresh == drm_mode_vrefresh(new_mode)) + ret = MODE_OK; + drm_mode_destroy(dev, new_mode); + } + + DBG("connector: mode %s: " + "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + (ret == MODE_OK) ? "valid" : "invalid", + mode->base.id, mode->name, mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, mode->type, mode->flags); + + return ret; +} + +struct drm_encoder *omap_connector_attached_encoder( + struct drm_connector *connector) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + return omap_connector->encoder; +} + +static const struct drm_connector_funcs omap_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = omap_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = omap_connector_destroy, +}; + +static const struct drm_connector_helper_funcs omap_connector_helper_funcs = { + .get_modes = omap_connector_get_modes, + .mode_valid = omap_connector_mode_valid, + .best_encoder = omap_connector_attached_encoder, +}; + +/* flush an area of the framebuffer (in case of manual update display that + * is not automatically flushed) + */ +void omap_connector_flush(struct drm_connector *connector, + int x, int y, int w, int h) +{ + struct omap_connector *omap_connector = to_omap_connector(connector); + + /* TODO: enable when supported in dss */ + VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h); +} + +/* initialize connector */ +struct drm_connector *omap_connector_init(struct drm_device *dev, + int connector_type, struct omap_dss_device *dssdev, + struct drm_encoder *encoder) +{ + struct drm_connector *connector = NULL; + struct omap_connector *omap_connector; + + DBG("%s", dssdev->name); + + omap_dss_get_device(dssdev); + + omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL); + if (!omap_connector) { + dev_err(dev->dev, "could not allocate connector\n"); + goto fail; + } + + omap_connector->dssdev = dssdev; + omap_connector->encoder = encoder; + + connector = &omap_connector->base; + + drm_connector_init(dev, connector, &omap_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &omap_connector_helper_funcs); + +#if 0 /* enable when dss2 supports hotplug */ + if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD) + connector->polled = 0; + else +#endif + connector->polled = DRM_CONNECTOR_POLL_CONNECT | + DRM_CONNECTOR_POLL_DISCONNECT; + + connector->interlace_allowed = 1; + connector->doublescan_allowed = 0; + + drm_sysfs_connector_add(connector); + + return connector; + +fail: + if (connector) + omap_connector_destroy(connector); + + return NULL; +} diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c new file mode 100644 index 000000000000..2b97cf90071b --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c @@ -0,0 +1,659 @@ +/* + * drivers/gpu/drm/omapdrm/omap_crtc.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +#include +#include "drm_crtc.h" +#include "drm_crtc_helper.h" + +#define to_omap_crtc(x) container_of(x, struct omap_crtc, base) + +struct omap_crtc { + struct drm_crtc base; + struct drm_plane *plane; + + const char *name; + int pipe; + enum omap_channel channel; + struct omap_overlay_manager_info info; + + /* + * Temporary: eventually this will go away, but it is needed + * for now to keep the output's happy. (They only need + * mgr->id.) Eventually this will be replaced w/ something + * more common-panel-framework-y + */ + struct omap_overlay_manager mgr; + + struct omap_video_timings timings; + bool enabled; + bool full_update; + + struct omap_drm_apply apply; + + struct omap_drm_irq apply_irq; + struct omap_drm_irq error_irq; + + /* list of in-progress apply's: */ + struct list_head pending_applies; + + /* list of queued apply's: */ + struct list_head queued_applies; + + /* for handling queued and in-progress applies: */ + struct work_struct apply_work; + + /* if there is a pending flip, these will be non-null: */ + struct drm_pending_vblank_event *event; + struct drm_framebuffer *old_fb; + + /* for handling page flips without caring about what + * the callback is called from. Possibly we should just + * make omap_gem always call the cb from the worker so + * we don't have to care about this.. + * + * XXX maybe fold into apply_work?? + */ + struct work_struct page_flip_work; +}; + +/* + * Manager-ops, callbacks from output when they need to configure + * the upstream part of the video pipe. + * + * Most of these we can ignore until we add support for command-mode + * panels.. for video-mode the crtc-helpers already do an adequate + * job of sequencing the setup of the video pipe in the proper order + */ + +/* we can probably ignore these until we support command-mode panels: */ +static void omap_crtc_start_update(struct omap_overlay_manager *mgr) +{ +} + +static int omap_crtc_enable(struct omap_overlay_manager *mgr) +{ + return 0; +} + +static void omap_crtc_disable(struct omap_overlay_manager *mgr) +{ +} + +static void omap_crtc_set_timings(struct omap_overlay_manager *mgr, + const struct omap_video_timings *timings) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + omap_crtc->timings = *timings; + omap_crtc->full_update = true; +} + +static void omap_crtc_set_lcd_config(struct omap_overlay_manager *mgr, + const struct dss_lcd_mgr_config *config) +{ + struct omap_crtc *omap_crtc = container_of(mgr, struct omap_crtc, mgr); + DBG("%s", omap_crtc->name); + dispc_mgr_set_lcd_config(omap_crtc->channel, config); +} + +static int omap_crtc_register_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ + return 0; +} + +static void omap_crtc_unregister_framedone_handler( + struct omap_overlay_manager *mgr, + void (*handler)(void *), void *data) +{ +} + +static const struct dss_mgr_ops mgr_ops = { + .start_update = omap_crtc_start_update, + .enable = omap_crtc_enable, + .disable = omap_crtc_disable, + .set_timings = omap_crtc_set_timings, + .set_lcd_config = omap_crtc_set_lcd_config, + .register_framedone_handler = omap_crtc_register_framedone_handler, + .unregister_framedone_handler = omap_crtc_unregister_framedone_handler, +}; + +/* + * CRTC funcs: + */ + +static void omap_crtc_destroy(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + DBG("%s", omap_crtc->name); + + WARN_ON(omap_crtc->apply_irq.registered); + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + omap_crtc->plane->funcs->destroy(omap_crtc->plane); + drm_crtc_cleanup(crtc); + + kfree(omap_crtc); +} + +static void omap_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct omap_drm_private *priv = crtc->dev->dev_private; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + bool enabled = (mode == DRM_MODE_DPMS_ON); + int i; + + DBG("%s: %d", omap_crtc->name, mode); + + if (enabled != omap_crtc->enabled) { + omap_crtc->enabled = enabled; + omap_crtc->full_update = true; + omap_crtc_apply(crtc, &omap_crtc->apply); + + /* also enable our private plane: */ + WARN_ON(omap_plane_dpms(omap_crtc->plane, mode)); + + /* and any attached overlay planes: */ + for (i = 0; i < priv->num_planes; i++) { + struct drm_plane *plane = priv->planes[i]; + if (plane->crtc == crtc) + WARN_ON(omap_plane_dpms(plane, mode)); + } + } +} + +static bool omap_crtc_mode_fixup(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + return true; +} + +static int omap_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + + mode = adjusted_mode; + + DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", + omap_crtc->name, mode->base.id, mode->name, + mode->vrefresh, mode->clock, + mode->hdisplay, mode->hsync_start, + mode->hsync_end, mode->htotal, + mode->vdisplay, mode->vsync_start, + mode->vsync_end, mode->vtotal, + mode->type, mode->flags); + + copy_timings_drm_to_omap(&omap_crtc->timings, mode); + omap_crtc->full_update = true; + + return omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); +} + +static void omap_crtc_prepare(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->name); + omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); +} + +static void omap_crtc_commit(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + DBG("%s", omap_crtc->name); + omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON); +} + +static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_plane *plane = omap_crtc->plane; + struct drm_display_mode *mode = &crtc->mode; + + return omap_plane_mode_set(plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + x << 16, y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + NULL, NULL); +} + +static void omap_crtc_load_lut(struct drm_crtc *crtc) +{ +} + +static void vblank_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + unsigned long flags; + + spin_lock_irqsave(&dev->event_lock, flags); + + /* wakeup userspace */ + if (omap_crtc->event) + drm_send_vblank_event(dev, omap_crtc->pipe, omap_crtc->event); + + omap_crtc->event = NULL; + omap_crtc->old_fb = NULL; + + spin_unlock_irqrestore(&dev->event_lock, flags); +} + +static void page_flip_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, page_flip_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct drm_display_mode *mode = &crtc->mode; + struct drm_gem_object *bo; + + drm_modeset_lock_all(dev); + omap_plane_mode_set(omap_crtc->plane, crtc, crtc->fb, + 0, 0, mode->hdisplay, mode->vdisplay, + crtc->x << 16, crtc->y << 16, + mode->hdisplay << 16, mode->vdisplay << 16, + vblank_cb, crtc); + drm_modeset_unlock_all(dev); + + bo = omap_framebuffer_bo(crtc->fb, 0); + drm_gem_object_unreference_unlocked(bo); +} + +static void page_flip_cb(void *arg) +{ + struct drm_crtc *crtc = arg; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_drm_private *priv = crtc->dev->dev_private; + + /* avoid assumptions about what ctxt we are called from: */ + queue_work(priv->wq, &omap_crtc->page_flip_work); +} + +static int omap_crtc_page_flip_locked(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_gem_object *bo; + + DBG("%d -> %d (event=%p)", crtc->fb ? crtc->fb->base.id : -1, + fb->base.id, event); + + if (omap_crtc->old_fb) { + dev_err(dev->dev, "already a pending flip\n"); + return -EINVAL; + } + + omap_crtc->event = event; + crtc->fb = fb; + + /* + * Hold a reference temporarily until the crtc is updated + * and takes the reference to the bo. This avoids it + * getting freed from under us: + */ + bo = omap_framebuffer_bo(fb, 0); + drm_gem_object_reference(bo); + + omap_gem_op_async(bo, OMAP_GEM_READ, page_flip_cb, crtc); + + return 0; +} + +static int omap_crtc_set_property(struct drm_crtc *crtc, + struct drm_property *property, uint64_t val) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct omap_drm_private *priv = crtc->dev->dev_private; + + if (property == priv->rotation_prop) { + crtc->invert_dimensions = + !!(val & ((1LL << DRM_ROTATE_90) | (1LL << DRM_ROTATE_270))); + } + + return omap_plane_set_property(omap_crtc->plane, property, val); +} + +static const struct drm_crtc_funcs omap_crtc_funcs = { + .set_config = drm_crtc_helper_set_config, + .destroy = omap_crtc_destroy, + .page_flip = omap_crtc_page_flip_locked, + .set_property = omap_crtc_set_property, +}; + +static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = { + .dpms = omap_crtc_dpms, + .mode_fixup = omap_crtc_mode_fixup, + .mode_set = omap_crtc_mode_set, + .prepare = omap_crtc_prepare, + .commit = omap_crtc_commit, + .mode_set_base = omap_crtc_mode_set_base, + .load_lut = omap_crtc_load_lut, +}; + +const struct omap_video_timings *omap_crtc_timings(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return &omap_crtc->timings; +} + +enum omap_channel omap_crtc_channel(struct drm_crtc *crtc) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + return omap_crtc->channel; +} + +static void omap_crtc_error_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, error_irq); + struct drm_crtc *crtc = &omap_crtc->base; + DRM_ERROR("%s: errors: %08x\n", omap_crtc->name, irqstatus); + /* avoid getting in a flood, unregister the irq until next vblank */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_apply_irq(struct omap_drm_irq *irq, uint32_t irqstatus) +{ + struct omap_crtc *omap_crtc = + container_of(irq, struct omap_crtc, apply_irq); + struct drm_crtc *crtc = &omap_crtc->base; + + if (!omap_crtc->error_irq.registered) + omap_irq_register(crtc->dev, &omap_crtc->error_irq); + + if (!dispc_mgr_go_busy(omap_crtc->channel)) { + struct omap_drm_private *priv = + crtc->dev->dev_private; + DBG("%s: apply done", omap_crtc->name); + omap_irq_unregister(crtc->dev, &omap_crtc->apply_irq); + queue_work(priv->wq, &omap_crtc->apply_work); + } +} + +static void apply_worker(struct work_struct *work) +{ + struct omap_crtc *omap_crtc = + container_of(work, struct omap_crtc, apply_work); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_device *dev = crtc->dev; + struct omap_drm_apply *apply, *n; + bool need_apply; + + /* + * Synchronize everything on mode_config.mutex, to keep + * the callbacks and list modification all serialized + * with respect to modesetting ioctls from userspace. + */ + drm_modeset_lock_all(dev); + dispc_runtime_get(); + + /* + * If we are still pending a previous update, wait.. when the + * pending update completes, we get kicked again. + */ + if (omap_crtc->apply_irq.registered) + goto out; + + /* finish up previous apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->pending_applies, pending_node) { + apply->post_apply(apply); + list_del(&apply->pending_node); + } + + need_apply = !list_empty(&omap_crtc->queued_applies); + + /* then handle the next round of of queued apply's: */ + list_for_each_entry_safe(apply, n, + &omap_crtc->queued_applies, queued_node) { + apply->pre_apply(apply); + list_del(&apply->queued_node); + apply->queued = false; + list_add_tail(&apply->pending_node, + &omap_crtc->pending_applies); + } + + if (need_apply) { + enum omap_channel channel = omap_crtc->channel; + + DBG("%s: GO", omap_crtc->name); + + if (dispc_mgr_is_enabled(channel)) { + omap_irq_register(dev, &omap_crtc->apply_irq); + dispc_mgr_go(channel); + } else { + struct omap_drm_private *priv = dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + } + +out: + dispc_runtime_put(); + drm_modeset_unlock_all(dev); +} + +int omap_crtc_apply(struct drm_crtc *crtc, + struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + struct drm_device *dev = crtc->dev; + + WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); + + /* no need to queue it again if it is already queued: */ + if (apply->queued) + return 0; + + apply->queued = true; + list_add_tail(&apply->queued_node, &omap_crtc->queued_applies); + + /* + * If there are no currently pending updates, then go ahead and + * kick the worker immediately, otherwise it will run again when + * the current update finishes. + */ + if (list_empty(&omap_crtc->pending_applies)) { + struct omap_drm_private *priv = crtc->dev->dev_private; + queue_work(priv->wq, &omap_crtc->apply_work); + } + + return 0; +} + +/* called only from apply */ +static void set_enabled(struct drm_crtc *crtc, bool enable) +{ + struct drm_device *dev = crtc->dev; + struct omap_crtc *omap_crtc = to_omap_crtc(crtc); + enum omap_channel channel = omap_crtc->channel; + struct omap_irq_wait *wait = NULL; + + if (dispc_mgr_is_enabled(channel) == enable) + return; + + /* ignore sync-lost irqs during enable/disable */ + omap_irq_unregister(crtc->dev, &omap_crtc->error_irq); + + if (dispc_mgr_get_framedone_irq(channel)) { + if (!enable) { + wait = omap_irq_wait_init(dev, + dispc_mgr_get_framedone_irq(channel), 1); + } + } else { + /* + * When we disable digit output, we need to wait until fields + * are done. Otherwise the DSS is still working, and turning + * off the clocks prevents DSS from going to OFF mode. And when + * enabling, we need to wait for the extra sync losts + */ + wait = omap_irq_wait_init(dev, + dispc_mgr_get_vsync_irq(channel), 2); + } + + dispc_mgr_enable(channel, enable); + + if (wait) { + int ret = omap_irq_wait(dev, wait, msecs_to_jiffies(100)); + if (ret) { + dev_err(dev->dev, "%s: timeout waiting for %s\n", + omap_crtc->name, enable ? "enable" : "disable"); + } + } + + omap_irq_register(crtc->dev, &omap_crtc->error_irq); +} + +static void omap_crtc_pre_apply(struct omap_drm_apply *apply) +{ + struct omap_crtc *omap_crtc = + container_of(apply, struct omap_crtc, apply); + struct drm_crtc *crtc = &omap_crtc->base; + struct drm_encoder *encoder = NULL; + + DBG("%s: enabled=%d, full=%d", omap_crtc->name, + omap_crtc->enabled, omap_crtc->full_update); + + if (omap_crtc->full_update) { + struct omap_drm_private *priv = crtc->dev->dev_private; + int i; + for (i = 0; i < priv->num_encoders; i++) { + if (priv->encoders[i]->crtc == crtc) { + encoder = priv->encoders[i]; + break; + } + } + } + + if (!omap_crtc->enabled) { + set_enabled(&omap_crtc->base, false); + if (encoder) + omap_encoder_set_enabled(encoder, false); + } else { + if (encoder) { + omap_encoder_set_enabled(encoder, false); + omap_encoder_update(encoder, &omap_crtc->mgr, + &omap_crtc->timings); + omap_encoder_set_enabled(encoder, true); + omap_crtc->full_update = false; + } + + dispc_mgr_setup(omap_crtc->channel, &omap_crtc->info); + dispc_mgr_set_timings(omap_crtc->channel, + &omap_crtc->timings); + set_enabled(&omap_crtc->base, true); + } + + omap_crtc->full_update = false; +} + +static void omap_crtc_post_apply(struct omap_drm_apply *apply) +{ + /* nothing needed for post-apply */ +} + +static const char *channel_names[] = { + [OMAP_DSS_CHANNEL_LCD] = "lcd", + [OMAP_DSS_CHANNEL_DIGIT] = "tv", + [OMAP_DSS_CHANNEL_LCD2] = "lcd2", +}; + +/* initialize crtc */ +struct drm_crtc *omap_crtc_init(struct drm_device *dev, + struct drm_plane *plane, enum omap_channel channel, int id) +{ + struct drm_crtc *crtc = NULL; + struct omap_crtc *omap_crtc; + struct omap_overlay_manager_info *info; + + DBG("%s", channel_names[channel]); + + omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL); + + if (!omap_crtc) { + dev_err(dev->dev, "could not allocate CRTC\n"); + goto fail; + } + + crtc = &omap_crtc->base; + + INIT_WORK(&omap_crtc->page_flip_work, page_flip_worker); + INIT_WORK(&omap_crtc->apply_work, apply_worker); + + INIT_LIST_HEAD(&omap_crtc->pending_applies); + INIT_LIST_HEAD(&omap_crtc->queued_applies); + + omap_crtc->apply.pre_apply = omap_crtc_pre_apply; + omap_crtc->apply.post_apply = omap_crtc_post_apply; + + omap_crtc->apply_irq.irqmask = pipe2vbl(id); + omap_crtc->apply_irq.irq = omap_crtc_apply_irq; + + omap_crtc->error_irq.irqmask = + dispc_mgr_get_sync_lost_irq(channel); + omap_crtc->error_irq.irq = omap_crtc_error_irq; + omap_irq_register(dev, &omap_crtc->error_irq); + + omap_crtc->channel = channel; + omap_crtc->plane = plane; + omap_crtc->plane->crtc = crtc; + omap_crtc->name = channel_names[channel]; + omap_crtc->pipe = id; + + /* temporary: */ + omap_crtc->mgr.id = channel; + + dss_install_mgr_ops(&mgr_ops); + + /* TODO: fix hard-coded setup.. add properties! */ + info = &omap_crtc->info; + info->default_color = 0x00000000; + info->trans_key = 0x00000000; + info->trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST; + info->trans_enabled = false; + + drm_crtc_init(dev, crtc, &omap_crtc_funcs); + drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs); + + omap_plane_install_properties(omap_crtc->plane, &crtc->base); + + return crtc; + +fail: + if (crtc) + omap_crtc_destroy(crtc); + + return NULL; +} diff --git a/drivers/gpu/drm/omapdrm/omap_debugfs.c b/drivers/gpu/drm/omapdrm/omap_debugfs.c new file mode 100644 index 000000000000..c0aa40f8ad6a --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_debugfs.c @@ -0,0 +1,139 @@ +/* + * drivers/gpu/drm/omapdrm/omap_debugfs.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" +#include "omap_dmm_tiler.h" + +#include "drm_fb_helper.h" + + +#ifdef CONFIG_DEBUG_FS + +static int gem_show(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct omap_drm_private *priv = dev->dev_private; + int ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + seq_printf(m, "All Objects:\n"); + omap_gem_describe_objects(&priv->obj_list, m); + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + +static int mm_show(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + return drm_mm_dump_table(m, dev->mm_private); +} + +static int fb_show(struct seq_file *m, void *arg) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct omap_drm_private *priv = dev->dev_private; + struct drm_framebuffer *fb; + int ret; + + ret = mutex_lock_interruptible(&dev->mode_config.mutex); + if (ret) + return ret; + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) { + mutex_unlock(&dev->mode_config.mutex); + return ret; + } + + seq_printf(m, "fbcon "); + omap_framebuffer_describe(priv->fbdev->fb, m); + + mutex_lock(&dev->mode_config.fb_lock); + list_for_each_entry(fb, &dev->mode_config.fb_list, head) { + if (fb == priv->fbdev->fb) + continue; + + seq_printf(m, "user "); + omap_framebuffer_describe(fb, m); + } + mutex_unlock(&dev->mode_config.fb_lock); + + mutex_unlock(&dev->struct_mutex); + mutex_unlock(&dev->mode_config.mutex); + + return 0; +} + +/* list of debufs files that are applicable to all devices */ +static struct drm_info_list omap_debugfs_list[] = { + {"gem", gem_show, 0}, + {"mm", mm_show, 0}, + {"fb", fb_show, 0}, +}; + +/* list of debugfs files that are specific to devices with dmm/tiler */ +static struct drm_info_list omap_dmm_debugfs_list[] = { + {"tiler_map", tiler_map_show, 0}, +}; + +int omap_debugfs_init(struct drm_minor *minor) +{ + struct drm_device *dev = minor->dev; + int ret; + + ret = drm_debugfs_create_files(omap_debugfs_list, + ARRAY_SIZE(omap_debugfs_list), + minor->debugfs_root, minor); + + if (ret) { + dev_err(dev->dev, "could not install omap_debugfs_list\n"); + return ret; + } + + if (dmm_is_available()) + ret = drm_debugfs_create_files(omap_dmm_debugfs_list, + ARRAY_SIZE(omap_dmm_debugfs_list), + minor->debugfs_root, minor); + + if (ret) { + dev_err(dev->dev, "could not install omap_dmm_debugfs_list\n"); + return ret; + } + + return ret; +} + +void omap_debugfs_cleanup(struct drm_minor *minor) +{ + drm_debugfs_remove_files(omap_debugfs_list, + ARRAY_SIZE(omap_debugfs_list), minor); + if (dmm_is_available()) + drm_debugfs_remove_files(omap_dmm_debugfs_list, + ARRAY_SIZE(omap_dmm_debugfs_list), minor); +} + +#endif diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_priv.h b/drivers/gpu/drm/omapdrm/omap_dmm_priv.h new file mode 100644 index 000000000000..58bcd6ae0255 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_dmm_priv.h @@ -0,0 +1,188 @@ +/* + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rob Clark + * Andy Gross + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef OMAP_DMM_PRIV_H +#define OMAP_DMM_PRIV_H + +#define DMM_REVISION 0x000 +#define DMM_HWINFO 0x004 +#define DMM_LISA_HWINFO 0x008 +#define DMM_DMM_SYSCONFIG 0x010 +#define DMM_LISA_LOCK 0x01C +#define DMM_LISA_MAP__0 0x040 +#define DMM_LISA_MAP__1 0x044 +#define DMM_TILER_HWINFO 0x208 +#define DMM_TILER_OR__0 0x220 +#define DMM_TILER_OR__1 0x224 +#define DMM_PAT_HWINFO 0x408 +#define DMM_PAT_GEOMETRY 0x40C +#define DMM_PAT_CONFIG 0x410 +#define DMM_PAT_VIEW__0 0x420 +#define DMM_PAT_VIEW__1 0x424 +#define DMM_PAT_VIEW_MAP__0 0x440 +#define DMM_PAT_VIEW_MAP_BASE 0x460 +#define DMM_PAT_IRQ_EOI 0x478 +#define DMM_PAT_IRQSTATUS_RAW 0x480 +#define DMM_PAT_IRQSTATUS 0x490 +#define DMM_PAT_IRQENABLE_SET 0x4A0 +#define DMM_PAT_IRQENABLE_CLR 0x4B0 +#define DMM_PAT_STATUS__0 0x4C0 +#define DMM_PAT_STATUS__1 0x4C4 +#define DMM_PAT_STATUS__2 0x4C8 +#define DMM_PAT_STATUS__3 0x4CC +#define DMM_PAT_DESCR__0 0x500 +#define DMM_PAT_DESCR__1 0x510 +#define DMM_PAT_DESCR__2 0x520 +#define DMM_PAT_DESCR__3 0x530 +#define DMM_PEG_HWINFO 0x608 +#define DMM_PEG_PRIO 0x620 +#define DMM_PEG_PRIO_PAT 0x640 + +#define DMM_IRQSTAT_DST (1<<0) +#define DMM_IRQSTAT_LST (1<<1) +#define DMM_IRQSTAT_ERR_INV_DSC (1<<2) +#define DMM_IRQSTAT_ERR_INV_DATA (1<<3) +#define DMM_IRQSTAT_ERR_UPD_AREA (1<<4) +#define DMM_IRQSTAT_ERR_UPD_CTRL (1<<5) +#define DMM_IRQSTAT_ERR_UPD_DATA (1<<6) +#define DMM_IRQSTAT_ERR_LUT_MISS (1<<7) + +#define DMM_IRQSTAT_ERR_MASK (DMM_IRQ_STAT_ERR_INV_DSC | \ + DMM_IRQ_STAT_ERR_INV_DATA | \ + DMM_IRQ_STAT_ERR_UPD_AREA | \ + DMM_IRQ_STAT_ERR_UPD_CTRL | \ + DMM_IRQ_STAT_ERR_UPD_DATA | \ + DMM_IRQ_STAT_ERR_LUT_MISS) + +#define DMM_PATSTATUS_READY (1<<0) +#define DMM_PATSTATUS_VALID (1<<1) +#define DMM_PATSTATUS_RUN (1<<2) +#define DMM_PATSTATUS_DONE (1<<3) +#define DMM_PATSTATUS_LINKED (1<<4) +#define DMM_PATSTATUS_BYPASSED (1<<7) +#define DMM_PATSTATUS_ERR_INV_DESCR (1<<10) +#define DMM_PATSTATUS_ERR_INV_DATA (1<<11) +#define DMM_PATSTATUS_ERR_UPD_AREA (1<<12) +#define DMM_PATSTATUS_ERR_UPD_CTRL (1<<13) +#define DMM_PATSTATUS_ERR_UPD_DATA (1<<14) +#define DMM_PATSTATUS_ERR_ACCESS (1<<15) + +/* note: don't treat DMM_PATSTATUS_ERR_ACCESS as an error */ +#define DMM_PATSTATUS_ERR (DMM_PATSTATUS_ERR_INV_DESCR | \ + DMM_PATSTATUS_ERR_INV_DATA | \ + DMM_PATSTATUS_ERR_UPD_AREA | \ + DMM_PATSTATUS_ERR_UPD_CTRL | \ + DMM_PATSTATUS_ERR_UPD_DATA) + + + +enum { + PAT_STATUS, + PAT_DESCR +}; + +struct pat_ctrl { + u32 start:4; + u32 dir:4; + u32 lut_id:8; + u32 sync:12; + u32 ini:4; +}; + +struct pat { + uint32_t next_pa; + struct pat_area area; + struct pat_ctrl ctrl; + uint32_t data_pa; +}; + +#define DMM_FIXED_RETRY_COUNT 1000 + +/* create refill buffer big enough to refill all slots, plus 3 descriptors.. + * 3 descriptors is probably the worst-case for # of 2d-slices in a 1d area, + * but I guess you don't hit that worst case at the same time as full area + * refill + */ +#define DESCR_SIZE 128 +#define REFILL_BUFFER_SIZE ((4 * 128 * 256) + (3 * DESCR_SIZE)) + +/* For OMAP5, a fixed offset is added to all Y coordinates for 1D buffers. + * This is used in programming to address the upper portion of the LUT +*/ +#define OMAP5_LUT_OFFSET 128 + +struct dmm; + +struct dmm_txn { + void *engine_handle; + struct tcm *tcm; + + uint8_t *current_va; + dma_addr_t current_pa; + + struct pat *last_pat; +}; + +struct refill_engine { + int id; + struct dmm *dmm; + struct tcm *tcm; + + uint8_t *refill_va; + dma_addr_t refill_pa; + + /* only one trans per engine for now */ + struct dmm_txn txn; + + bool async; + + wait_queue_head_t wait_for_refill; + + struct list_head idle_node; +}; + +struct dmm { + struct device *dev; + void __iomem *base; + int irq; + + struct page *dummy_page; + dma_addr_t dummy_pa; + + void *refill_va; + dma_addr_t refill_pa; + + /* refill engines */ + wait_queue_head_t engine_queue; + struct list_head idle_head; + struct refill_engine *engines; + int num_engines; + atomic_t engine_counter; + + /* container information */ + int container_width; + int container_height; + int lut_width; + int lut_height; + int num_lut; + + /* array of LUT - TCM containers */ + struct tcm **tcm; + + /* allocation list and lock */ + struct list_head alloc_head; +}; + +#endif diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c new file mode 100644 index 000000000000..391021537105 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c @@ -0,0 +1,991 @@ +/* + * DMM IOMMU driver support functions for TI OMAP processors. + * + * Author: Rob Clark + * Andy Gross + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include /* platform_device() */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "omap_dmm_tiler.h" +#include "omap_dmm_priv.h" + +#define DMM_DRIVER_NAME "dmm" + +/* mappings for associating views to luts */ +static struct tcm *containers[TILFMT_NFORMATS]; +static struct dmm *omap_dmm; + +/* global spinlock for protecting lists */ +static DEFINE_SPINLOCK(list_lock); + +/* Geometry table */ +#define GEOM(xshift, yshift, bytes_per_pixel) { \ + .x_shft = (xshift), \ + .y_shft = (yshift), \ + .cpp = (bytes_per_pixel), \ + .slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \ + .slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \ + } + +static const struct { + uint32_t x_shft; /* unused X-bits (as part of bpp) */ + uint32_t y_shft; /* unused Y-bits (as part of bpp) */ + uint32_t cpp; /* bytes/chars per pixel */ + uint32_t slot_w; /* width of each slot (in pixels) */ + uint32_t slot_h; /* height of each slot (in pixels) */ +} geom[TILFMT_NFORMATS] = { + [TILFMT_8BIT] = GEOM(0, 0, 1), + [TILFMT_16BIT] = GEOM(0, 1, 2), + [TILFMT_32BIT] = GEOM(1, 1, 4), + [TILFMT_PAGE] = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1), +}; + + +/* lookup table for registers w/ per-engine instances */ +static const uint32_t reg[][4] = { + [PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1, + DMM_PAT_STATUS__2, DMM_PAT_STATUS__3}, + [PAT_DESCR] = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1, + DMM_PAT_DESCR__2, DMM_PAT_DESCR__3}, +}; + +/* simple allocator to grab next 16 byte aligned memory from txn */ +static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa) +{ + void *ptr; + struct refill_engine *engine = txn->engine_handle; + + /* dmm programming requires 16 byte aligned addresses */ + txn->current_pa = round_up(txn->current_pa, 16); + txn->current_va = (void *)round_up((long)txn->current_va, 16); + + ptr = txn->current_va; + *pa = txn->current_pa; + + txn->current_pa += sz; + txn->current_va += sz; + + BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE); + + return ptr; +} + +/* check status and spin until wait_mask comes true */ +static int wait_status(struct refill_engine *engine, uint32_t wait_mask) +{ + struct dmm *dmm = engine->dmm; + uint32_t r = 0, err, i; + + i = DMM_FIXED_RETRY_COUNT; + while (true) { + r = readl(dmm->base + reg[PAT_STATUS][engine->id]); + err = r & DMM_PATSTATUS_ERR; + if (err) + return -EFAULT; + + if ((r & wait_mask) == wait_mask) + break; + + if (--i == 0) + return -ETIMEDOUT; + + udelay(1); + } + + return 0; +} + +static void release_engine(struct refill_engine *engine) +{ + unsigned long flags; + + spin_lock_irqsave(&list_lock, flags); + list_add(&engine->idle_node, &omap_dmm->idle_head); + spin_unlock_irqrestore(&list_lock, flags); + + atomic_inc(&omap_dmm->engine_counter); + wake_up_interruptible(&omap_dmm->engine_queue); +} + +static irqreturn_t omap_dmm_irq_handler(int irq, void *arg) +{ + struct dmm *dmm = arg; + uint32_t status = readl(dmm->base + DMM_PAT_IRQSTATUS); + int i; + + /* ack IRQ */ + writel(status, dmm->base + DMM_PAT_IRQSTATUS); + + for (i = 0; i < dmm->num_engines; i++) { + if (status & DMM_IRQSTAT_LST) { + wake_up_interruptible(&dmm->engines[i].wait_for_refill); + + if (dmm->engines[i].async) + release_engine(&dmm->engines[i]); + } + + status >>= 8; + } + + return IRQ_HANDLED; +} + +/** + * Get a handle for a DMM transaction + */ +static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm) +{ + struct dmm_txn *txn = NULL; + struct refill_engine *engine = NULL; + int ret; + unsigned long flags; + + + /* wait until an engine is available */ + ret = wait_event_interruptible(omap_dmm->engine_queue, + atomic_add_unless(&omap_dmm->engine_counter, -1, 0)); + if (ret) + return ERR_PTR(ret); + + /* grab an idle engine */ + spin_lock_irqsave(&list_lock, flags); + if (!list_empty(&dmm->idle_head)) { + engine = list_entry(dmm->idle_head.next, struct refill_engine, + idle_node); + list_del(&engine->idle_node); + } + spin_unlock_irqrestore(&list_lock, flags); + + BUG_ON(!engine); + + txn = &engine->txn; + engine->tcm = tcm; + txn->engine_handle = engine; + txn->last_pat = NULL; + txn->current_va = engine->refill_va; + txn->current_pa = engine->refill_pa; + + return txn; +} + +/** + * Add region to DMM transaction. If pages or pages[i] is NULL, then the + * corresponding slot is cleared (ie. dummy_pa is programmed) + */ +static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area, + struct page **pages, uint32_t npages, uint32_t roll) +{ + dma_addr_t pat_pa = 0; + uint32_t *data; + struct pat *pat; + struct refill_engine *engine = txn->engine_handle; + int columns = (1 + area->x1 - area->x0); + int rows = (1 + area->y1 - area->y0); + int i = columns*rows; + + pat = alloc_dma(txn, sizeof(struct pat), &pat_pa); + + if (txn->last_pat) + txn->last_pat->next_pa = (uint32_t)pat_pa; + + pat->area = *area; + + /* adjust Y coordinates based off of container parameters */ + pat->area.y0 += engine->tcm->y_offset; + pat->area.y1 += engine->tcm->y_offset; + + pat->ctrl = (struct pat_ctrl){ + .start = 1, + .lut_id = engine->tcm->lut_id, + }; + + data = alloc_dma(txn, 4*i, &pat->data_pa); + + while (i--) { + int n = i + roll; + if (n >= npages) + n -= npages; + data[i] = (pages && pages[n]) ? + page_to_phys(pages[n]) : engine->dmm->dummy_pa; + } + + txn->last_pat = pat; + + return; +} + +/** + * Commit the DMM transaction. + */ +static int dmm_txn_commit(struct dmm_txn *txn, bool wait) +{ + int ret = 0; + struct refill_engine *engine = txn->engine_handle; + struct dmm *dmm = engine->dmm; + + if (!txn->last_pat) { + dev_err(engine->dmm->dev, "need at least one txn\n"); + ret = -EINVAL; + goto cleanup; + } + + txn->last_pat->next_pa = 0; + + /* write to PAT_DESCR to clear out any pending transaction */ + writel(0x0, dmm->base + reg[PAT_DESCR][engine->id]); + + /* wait for engine ready: */ + ret = wait_status(engine, DMM_PATSTATUS_READY); + if (ret) { + ret = -EFAULT; + goto cleanup; + } + + /* mark whether it is async to denote list management in IRQ handler */ + engine->async = wait ? false : true; + + /* kick reload */ + writel(engine->refill_pa, + dmm->base + reg[PAT_DESCR][engine->id]); + + if (wait) { + if (wait_event_interruptible_timeout(engine->wait_for_refill, + wait_status(engine, DMM_PATSTATUS_READY) == 0, + msecs_to_jiffies(1)) <= 0) { + dev_err(dmm->dev, "timed out waiting for done\n"); + ret = -ETIMEDOUT; + } + } + +cleanup: + /* only place engine back on list if we are done with it */ + if (ret || wait) + release_engine(engine); + + return ret; +} + +/* + * DMM programming + */ +static int fill(struct tcm_area *area, struct page **pages, + uint32_t npages, uint32_t roll, bool wait) +{ + int ret = 0; + struct tcm_area slice, area_s; + struct dmm_txn *txn; + + txn = dmm_txn_init(omap_dmm, area->tcm); + if (IS_ERR_OR_NULL(txn)) + return -ENOMEM; + + tcm_for_each_slice(slice, *area, area_s) { + struct pat_area p_area = { + .x0 = slice.p0.x, .y0 = slice.p0.y, + .x1 = slice.p1.x, .y1 = slice.p1.y, + }; + + dmm_txn_append(txn, &p_area, pages, npages, roll); + + roll += tcm_sizeof(slice); + } + + ret = dmm_txn_commit(txn, wait); + + return ret; +} + +/* + * Pin/unpin + */ + +/* note: slots for which pages[i] == NULL are filled w/ dummy page + */ +int tiler_pin(struct tiler_block *block, struct page **pages, + uint32_t npages, uint32_t roll, bool wait) +{ + int ret; + + ret = fill(&block->area, pages, npages, roll, wait); + + if (ret) + tiler_unpin(block); + + return ret; +} + +int tiler_unpin(struct tiler_block *block) +{ + return fill(&block->area, NULL, 0, 0, false); +} + +/* + * Reserve/release + */ +struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, + uint16_t h, uint16_t align) +{ + struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL); + u32 min_align = 128; + int ret; + unsigned long flags; + + BUG_ON(!validfmt(fmt)); + + /* convert width/height to slots */ + w = DIV_ROUND_UP(w, geom[fmt].slot_w); + h = DIV_ROUND_UP(h, geom[fmt].slot_h); + + /* convert alignment to slots */ + min_align = max(min_align, (geom[fmt].slot_w * geom[fmt].cpp)); + align = ALIGN(align, min_align); + align /= geom[fmt].slot_w * geom[fmt].cpp; + + block->fmt = fmt; + + ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area); + if (ret) { + kfree(block); + return ERR_PTR(-ENOMEM); + } + + /* add to allocation list */ + spin_lock_irqsave(&list_lock, flags); + list_add(&block->alloc_node, &omap_dmm->alloc_head); + spin_unlock_irqrestore(&list_lock, flags); + + return block; +} + +struct tiler_block *tiler_reserve_1d(size_t size) +{ + struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL); + int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; + unsigned long flags; + + if (!block) + return ERR_PTR(-ENOMEM); + + block->fmt = TILFMT_PAGE; + + if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages, + &block->area)) { + kfree(block); + return ERR_PTR(-ENOMEM); + } + + spin_lock_irqsave(&list_lock, flags); + list_add(&block->alloc_node, &omap_dmm->alloc_head); + spin_unlock_irqrestore(&list_lock, flags); + + return block; +} + +/* note: if you have pin'd pages, you should have already unpin'd first! */ +int tiler_release(struct tiler_block *block) +{ + int ret = tcm_free(&block->area); + unsigned long flags; + + if (block->area.tcm) + dev_err(omap_dmm->dev, "failed to release block\n"); + + spin_lock_irqsave(&list_lock, flags); + list_del(&block->alloc_node); + spin_unlock_irqrestore(&list_lock, flags); + + kfree(block); + return ret; +} + +/* + * Utils + */ + +/* calculate the tiler space address of a pixel in a view orientation... + * below description copied from the display subsystem section of TRM: + * + * When the TILER is addressed, the bits: + * [28:27] = 0x0 for 8-bit tiled + * 0x1 for 16-bit tiled + * 0x2 for 32-bit tiled + * 0x3 for page mode + * [31:29] = 0x0 for 0-degree view + * 0x1 for 180-degree view + mirroring + * 0x2 for 0-degree view + mirroring + * 0x3 for 180-degree view + * 0x4 for 270-degree view + mirroring + * 0x5 for 270-degree view + * 0x6 for 90-degree view + * 0x7 for 90-degree view + mirroring + * Otherwise the bits indicated the corresponding bit address to access + * the SDRAM. + */ +static u32 tiler_get_address(enum tiler_fmt fmt, u32 orient, u32 x, u32 y) +{ + u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment; + + x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft; + y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft; + alignment = geom[fmt].x_shft + geom[fmt].y_shft; + + /* validate coordinate */ + x_mask = MASK(x_bits); + y_mask = MASK(y_bits); + + if (x < 0 || x > x_mask || y < 0 || y > y_mask) { + DBG("invalid coords: %u < 0 || %u > %u || %u < 0 || %u > %u", + x, x, x_mask, y, y, y_mask); + return 0; + } + + /* account for mirroring */ + if (orient & MASK_X_INVERT) + x ^= x_mask; + if (orient & MASK_Y_INVERT) + y ^= y_mask; + + /* get coordinate address */ + if (orient & MASK_XY_FLIP) + tmp = ((x << y_bits) + y); + else + tmp = ((y << x_bits) + x); + + return TIL_ADDR((tmp << alignment), orient, fmt); +} + +dma_addr_t tiler_ssptr(struct tiler_block *block) +{ + BUG_ON(!validfmt(block->fmt)); + + return TILVIEW_8BIT + tiler_get_address(block->fmt, 0, + block->area.p0.x * geom[block->fmt].slot_w, + block->area.p0.y * geom[block->fmt].slot_h); +} + +dma_addr_t tiler_tsptr(struct tiler_block *block, uint32_t orient, + uint32_t x, uint32_t y) +{ + struct tcm_pt *p = &block->area.p0; + BUG_ON(!validfmt(block->fmt)); + + return tiler_get_address(block->fmt, orient, + (p->x * geom[block->fmt].slot_w) + x, + (p->y * geom[block->fmt].slot_h) + y); +} + +void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h) +{ + BUG_ON(!validfmt(fmt)); + *w = round_up(*w, geom[fmt].slot_w); + *h = round_up(*h, geom[fmt].slot_h); +} + +uint32_t tiler_stride(enum tiler_fmt fmt, uint32_t orient) +{ + BUG_ON(!validfmt(fmt)); + + if (orient & MASK_XY_FLIP) + return 1 << (CONT_HEIGHT_BITS + geom[fmt].x_shft); + else + return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft); +} + +size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h) +{ + tiler_align(fmt, &w, &h); + return geom[fmt].cpp * w * h; +} + +size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h) +{ + BUG_ON(!validfmt(fmt)); + return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h; +} + +bool dmm_is_available(void) +{ + return omap_dmm ? true : false; +} + +static int omap_dmm_remove(struct platform_device *dev) +{ + struct tiler_block *block, *_block; + int i; + unsigned long flags; + + if (omap_dmm) { + /* free all area regions */ + spin_lock_irqsave(&list_lock, flags); + list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head, + alloc_node) { + list_del(&block->alloc_node); + kfree(block); + } + spin_unlock_irqrestore(&list_lock, flags); + + for (i = 0; i < omap_dmm->num_lut; i++) + if (omap_dmm->tcm && omap_dmm->tcm[i]) + omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]); + kfree(omap_dmm->tcm); + + kfree(omap_dmm->engines); + if (omap_dmm->refill_va) + dma_free_writecombine(omap_dmm->dev, + REFILL_BUFFER_SIZE * omap_dmm->num_engines, + omap_dmm->refill_va, + omap_dmm->refill_pa); + if (omap_dmm->dummy_page) + __free_page(omap_dmm->dummy_page); + + if (omap_dmm->irq > 0) + free_irq(omap_dmm->irq, omap_dmm); + + iounmap(omap_dmm->base); + kfree(omap_dmm); + omap_dmm = NULL; + } + + return 0; +} + +static int omap_dmm_probe(struct platform_device *dev) +{ + int ret = -EFAULT, i; + struct tcm_area area = {0}; + u32 hwinfo, pat_geom; + struct resource *mem; + + omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL); + if (!omap_dmm) { + dev_err(&dev->dev, "failed to allocate driver data section\n"); + goto fail; + } + + /* initialize lists */ + INIT_LIST_HEAD(&omap_dmm->alloc_head); + INIT_LIST_HEAD(&omap_dmm->idle_head); + + init_waitqueue_head(&omap_dmm->engine_queue); + + /* lookup hwmod data - base address and irq */ + mem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&dev->dev, "failed to get base address resource\n"); + goto fail; + } + + omap_dmm->base = ioremap(mem->start, SZ_2K); + + if (!omap_dmm->base) { + dev_err(&dev->dev, "failed to get dmm base address\n"); + goto fail; + } + + omap_dmm->irq = platform_get_irq(dev, 0); + if (omap_dmm->irq < 0) { + dev_err(&dev->dev, "failed to get IRQ resource\n"); + goto fail; + } + + omap_dmm->dev = &dev->dev; + + hwinfo = readl(omap_dmm->base + DMM_PAT_HWINFO); + omap_dmm->num_engines = (hwinfo >> 24) & 0x1F; + omap_dmm->num_lut = (hwinfo >> 16) & 0x1F; + omap_dmm->container_width = 256; + omap_dmm->container_height = 128; + + atomic_set(&omap_dmm->engine_counter, omap_dmm->num_engines); + + /* read out actual LUT width and height */ + pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY); + omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5; + omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5; + + /* increment LUT by one if on OMAP5 */ + /* LUT has twice the height, and is split into a separate container */ + if (omap_dmm->lut_height != omap_dmm->container_height) + omap_dmm->num_lut++; + + /* initialize DMM registers */ + writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__0); + writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__1); + writel(0x80808080, omap_dmm->base + DMM_PAT_VIEW_MAP__0); + writel(0x80000000, omap_dmm->base + DMM_PAT_VIEW_MAP_BASE); + writel(0x88888888, omap_dmm->base + DMM_TILER_OR__0); + writel(0x88888888, omap_dmm->base + DMM_TILER_OR__1); + + ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED, + "omap_dmm_irq_handler", omap_dmm); + + if (ret) { + dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n", + omap_dmm->irq, ret); + omap_dmm->irq = -1; + goto fail; + } + + /* Enable all interrupts for each refill engine except + * ERR_LUT_MISS (which is just advisory, and we don't care + * about because we want to be able to refill live scanout + * buffers for accelerated pan/scroll) and FILL_DSC which + * we just generally don't care about. + */ + writel(0x7e7e7e7e, omap_dmm->base + DMM_PAT_IRQENABLE_SET); + + omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32); + if (!omap_dmm->dummy_page) { + dev_err(&dev->dev, "could not allocate dummy page\n"); + ret = -ENOMEM; + goto fail; + } + + /* set dma mask for device */ + /* NOTE: this is a workaround for the hwmod not initializing properly */ + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page); + + /* alloc refill memory */ + omap_dmm->refill_va = dma_alloc_writecombine(&dev->dev, + REFILL_BUFFER_SIZE * omap_dmm->num_engines, + &omap_dmm->refill_pa, GFP_KERNEL); + if (!omap_dmm->refill_va) { + dev_err(&dev->dev, "could not allocate refill memory\n"); + goto fail; + } + + /* alloc engines */ + omap_dmm->engines = kzalloc( + omap_dmm->num_engines * sizeof(struct refill_engine), + GFP_KERNEL); + if (!omap_dmm->engines) { + dev_err(&dev->dev, "could not allocate engines\n"); + ret = -ENOMEM; + goto fail; + } + + for (i = 0; i < omap_dmm->num_engines; i++) { + omap_dmm->engines[i].id = i; + omap_dmm->engines[i].dmm = omap_dmm; + omap_dmm->engines[i].refill_va = omap_dmm->refill_va + + (REFILL_BUFFER_SIZE * i); + omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa + + (REFILL_BUFFER_SIZE * i); + init_waitqueue_head(&omap_dmm->engines[i].wait_for_refill); + + list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head); + } + + omap_dmm->tcm = kzalloc(omap_dmm->num_lut * sizeof(*omap_dmm->tcm), + GFP_KERNEL); + if (!omap_dmm->tcm) { + dev_err(&dev->dev, "failed to allocate lut ptrs\n"); + ret = -ENOMEM; + goto fail; + } + + /* init containers */ + /* Each LUT is associated with a TCM (container manager). We use the + lut_id to denote the lut_id used to identify the correct LUT for + programming during reill operations */ + for (i = 0; i < omap_dmm->num_lut; i++) { + omap_dmm->tcm[i] = sita_init(omap_dmm->container_width, + omap_dmm->container_height, + NULL); + + if (!omap_dmm->tcm[i]) { + dev_err(&dev->dev, "failed to allocate container\n"); + ret = -ENOMEM; + goto fail; + } + + omap_dmm->tcm[i]->lut_id = i; + } + + /* assign access mode containers to applicable tcm container */ + /* OMAP 4 has 1 container for all 4 views */ + /* OMAP 5 has 2 containers, 1 for 2D and 1 for 1D */ + containers[TILFMT_8BIT] = omap_dmm->tcm[0]; + containers[TILFMT_16BIT] = omap_dmm->tcm[0]; + containers[TILFMT_32BIT] = omap_dmm->tcm[0]; + + if (omap_dmm->container_height != omap_dmm->lut_height) { + /* second LUT is used for PAGE mode. Programming must use + y offset that is added to all y coordinates. LUT id is still + 0, because it is the same LUT, just the upper 128 lines */ + containers[TILFMT_PAGE] = omap_dmm->tcm[1]; + omap_dmm->tcm[1]->y_offset = OMAP5_LUT_OFFSET; + omap_dmm->tcm[1]->lut_id = 0; + } else { + containers[TILFMT_PAGE] = omap_dmm->tcm[0]; + } + + area = (struct tcm_area) { + .tcm = NULL, + .p1.x = omap_dmm->container_width - 1, + .p1.y = omap_dmm->container_height - 1, + }; + + /* initialize all LUTs to dummy page entries */ + for (i = 0; i < omap_dmm->num_lut; i++) { + area.tcm = omap_dmm->tcm[i]; + if (fill(&area, NULL, 0, 0, true)) + dev_err(omap_dmm->dev, "refill failed"); + } + + dev_info(omap_dmm->dev, "initialized all PAT entries\n"); + + return 0; + +fail: + if (omap_dmm_remove(dev)) + dev_err(&dev->dev, "cleanup failed\n"); + return ret; +} + +/* + * debugfs support + */ + +#ifdef CONFIG_DEBUG_FS + +static const char *alphabet = "abcdefghijklmnopqrstuvwxyz" + "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"; +static const char *special = ".,:;'\"`~!^-+"; + +static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a, + char c, bool ovw) +{ + int x, y; + for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++) + for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++) + if (map[y][x] == ' ' || ovw) + map[y][x] = c; +} + +static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p, + char c) +{ + map[p->y / ydiv][p->x / xdiv] = c; +} + +static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p) +{ + return map[p->y / ydiv][p->x / xdiv]; +} + +static int map_width(int xdiv, int x0, int x1) +{ + return (x1 / xdiv) - (x0 / xdiv) + 1; +} + +static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1) +{ + char *p = map[yd] + (x0 / xdiv); + int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2; + if (w >= 0) { + p += w; + while (*nice) + *p++ = *nice++; + } +} + +static void map_1d_info(char **map, int xdiv, int ydiv, char *nice, + struct tcm_area *a) +{ + sprintf(nice, "%dK", tcm_sizeof(*a) * 4); + if (a->p0.y + 1 < a->p1.y) { + text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0, + 256 - 1); + } else if (a->p0.y < a->p1.y) { + if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1)) + text_map(map, xdiv, nice, a->p0.y / ydiv, + a->p0.x + xdiv, 256 - 1); + else if (strlen(nice) < map_width(xdiv, 0, a->p1.x)) + text_map(map, xdiv, nice, a->p1.y / ydiv, + 0, a->p1.y - xdiv); + } else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) { + text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x); + } +} + +static void map_2d_info(char **map, int xdiv, int ydiv, char *nice, + struct tcm_area *a) +{ + sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a)); + if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) + text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, + a->p0.x, a->p1.x); +} + +int tiler_map_show(struct seq_file *s, void *arg) +{ + int xdiv = 2, ydiv = 1; + char **map = NULL, *global_map; + struct tiler_block *block; + struct tcm_area a, p; + int i; + const char *m2d = alphabet; + const char *a2d = special; + const char *m2dp = m2d, *a2dp = a2d; + char nice[128]; + int h_adj; + int w_adj; + unsigned long flags; + int lut_idx; + + + if (!omap_dmm) { + /* early return if dmm/tiler device is not initialized */ + return 0; + } + + h_adj = omap_dmm->container_height / ydiv; + w_adj = omap_dmm->container_width / xdiv; + + map = kmalloc(h_adj * sizeof(*map), GFP_KERNEL); + global_map = kmalloc((w_adj + 1) * h_adj, GFP_KERNEL); + + if (!map || !global_map) + goto error; + + for (lut_idx = 0; lut_idx < omap_dmm->num_lut; lut_idx++) { + memset(map, 0, sizeof(h_adj * sizeof(*map))); + memset(global_map, ' ', (w_adj + 1) * h_adj); + + for (i = 0; i < omap_dmm->container_height; i++) { + map[i] = global_map + i * (w_adj + 1); + map[i][w_adj] = 0; + } + + spin_lock_irqsave(&list_lock, flags); + + list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) { + if (block->area.tcm == omap_dmm->tcm[lut_idx]) { + if (block->fmt != TILFMT_PAGE) { + fill_map(map, xdiv, ydiv, &block->area, + *m2dp, true); + if (!*++a2dp) + a2dp = a2d; + if (!*++m2dp) + m2dp = m2d; + map_2d_info(map, xdiv, ydiv, nice, + &block->area); + } else { + bool start = read_map_pt(map, xdiv, + ydiv, &block->area.p0) == ' '; + bool end = read_map_pt(map, xdiv, ydiv, + &block->area.p1) == ' '; + + tcm_for_each_slice(a, block->area, p) + fill_map(map, xdiv, ydiv, &a, + '=', true); + fill_map_pt(map, xdiv, ydiv, + &block->area.p0, + start ? '<' : 'X'); + fill_map_pt(map, xdiv, ydiv, + &block->area.p1, + end ? '>' : 'X'); + map_1d_info(map, xdiv, ydiv, nice, + &block->area); + } + } + } + + spin_unlock_irqrestore(&list_lock, flags); + + if (s) { + seq_printf(s, "CONTAINER %d DUMP BEGIN\n", lut_idx); + for (i = 0; i < 128; i++) + seq_printf(s, "%03d:%s\n", i, map[i]); + seq_printf(s, "CONTAINER %d DUMP END\n", lut_idx); + } else { + dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP BEGIN\n", + lut_idx); + for (i = 0; i < 128; i++) + dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]); + dev_dbg(omap_dmm->dev, "CONTAINER %d DUMP END\n", + lut_idx); + } + } + +error: + kfree(map); + kfree(global_map); + + return 0; +} +#endif + +#ifdef CONFIG_PM +static int omap_dmm_resume(struct device *dev) +{ + struct tcm_area area; + int i; + + if (!omap_dmm) + return -ENODEV; + + area = (struct tcm_area) { + .tcm = NULL, + .p1.x = omap_dmm->container_width - 1, + .p1.y = omap_dmm->container_height - 1, + }; + + /* initialize all LUTs to dummy page entries */ + for (i = 0; i < omap_dmm->num_lut; i++) { + area.tcm = omap_dmm->tcm[i]; + if (fill(&area, NULL, 0, 0, true)) + dev_err(dev, "refill failed"); + } + + return 0; +} + +static const struct dev_pm_ops omap_dmm_pm_ops = { + .resume = omap_dmm_resume, +}; +#endif + +struct platform_driver omap_dmm_driver = { + .probe = omap_dmm_probe, + .remove = omap_dmm_remove, + .driver = { + .owner = THIS_MODULE, + .name = DMM_DRIVER_NAME, +#ifdef CONFIG_PM + .pm = &omap_dmm_pm_ops, +#endif + }, +}; + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andy Gross "); +MODULE_DESCRIPTION("OMAP DMM/Tiler Driver"); +MODULE_ALIAS("platform:" DMM_DRIVER_NAME); diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.h b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.h new file mode 100644 index 000000000000..4fdd61e54bd2 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.h @@ -0,0 +1,141 @@ +/* + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rob Clark + * Andy Gross + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef OMAP_DMM_TILER_H +#define OMAP_DMM_TILER_H + +#include "omap_drv.h" +#include "tcm.h" + +enum tiler_fmt { + TILFMT_8BIT = 0, + TILFMT_16BIT, + TILFMT_32BIT, + TILFMT_PAGE, + TILFMT_NFORMATS +}; + +struct pat_area { + u32 x0:8; + u32 y0:8; + u32 x1:8; + u32 y1:8; +}; + +struct tiler_block { + struct list_head alloc_node; /* node for global block list */ + struct tcm_area area; /* area */ + enum tiler_fmt fmt; /* format */ +}; + +/* bits representing the same slot in DMM-TILER hw-block */ +#define SLOT_WIDTH_BITS 6 +#define SLOT_HEIGHT_BITS 6 + +/* bits reserved to describe coordinates in DMM-TILER hw-block */ +#define CONT_WIDTH_BITS 14 +#define CONT_HEIGHT_BITS 13 + +/* calculated constants */ +#define TILER_PAGE (1 << (SLOT_WIDTH_BITS + SLOT_HEIGHT_BITS)) +#define TILER_WIDTH (1 << (CONT_WIDTH_BITS - SLOT_WIDTH_BITS)) +#define TILER_HEIGHT (1 << (CONT_HEIGHT_BITS - SLOT_HEIGHT_BITS)) + +/* +Table 15-11. Coding and Description of TILER Orientations +S Y X Description Alternate description +0 0 0 0-degree view Natural view +0 0 1 0-degree view with vertical mirror 180-degree view with horizontal mirror +0 1 0 0-degree view with horizontal mirror 180-degree view with vertical mirror +0 1 1 180-degree view +1 0 0 90-degree view with vertical mirror 270-degree view with horizontal mirror +1 0 1 270-degree view +1 1 0 90-degree view +1 1 1 90-degree view with horizontal mirror 270-degree view with vertical mirror + */ +#define MASK_XY_FLIP (1 << 31) +#define MASK_Y_INVERT (1 << 30) +#define MASK_X_INVERT (1 << 29) +#define SHIFT_ACC_MODE 27 +#define MASK_ACC_MODE 3 + +#define MASK(bits) ((1 << (bits)) - 1) + +#define TILVIEW_8BIT 0x60000000u +#define TILVIEW_16BIT (TILVIEW_8BIT + VIEW_SIZE) +#define TILVIEW_32BIT (TILVIEW_16BIT + VIEW_SIZE) +#define TILVIEW_PAGE (TILVIEW_32BIT + VIEW_SIZE) +#define TILVIEW_END (TILVIEW_PAGE + VIEW_SIZE) + +/* create tsptr by adding view orientation and access mode */ +#define TIL_ADDR(x, orient, a)\ + ((u32) (x) | (orient) | ((a) << SHIFT_ACC_MODE)) + +#ifdef CONFIG_DEBUG_FS +int tiler_map_show(struct seq_file *s, void *arg); +#endif + +/* pin/unpin */ +int tiler_pin(struct tiler_block *block, struct page **pages, + uint32_t npages, uint32_t roll, bool wait); +int tiler_unpin(struct tiler_block *block); + +/* reserve/release */ +struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, uint16_t h, + uint16_t align); +struct tiler_block *tiler_reserve_1d(size_t size); +int tiler_release(struct tiler_block *block); + +/* utilities */ +dma_addr_t tiler_ssptr(struct tiler_block *block); +dma_addr_t tiler_tsptr(struct tiler_block *block, uint32_t orient, + uint32_t x, uint32_t y); +uint32_t tiler_stride(enum tiler_fmt fmt, uint32_t orient); +size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h); +size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h); +void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h); +bool dmm_is_available(void); + +extern struct platform_driver omap_dmm_driver; + +/* GEM bo flags -> tiler fmt */ +static inline enum tiler_fmt gem2fmt(uint32_t flags) +{ + switch (flags & OMAP_BO_TILED) { + case OMAP_BO_TILED_8: + return TILFMT_8BIT; + case OMAP_BO_TILED_16: + return TILFMT_16BIT; + case OMAP_BO_TILED_32: + return TILFMT_32BIT; + default: + return TILFMT_PAGE; + } +} + +static inline bool validfmt(enum tiler_fmt fmt) +{ + switch (fmt) { + case TILFMT_8BIT: + case TILFMT_16BIT: + case TILFMT_32BIT: + case TILFMT_PAGE: + return true; + default: + return false; + } +} + +#endif diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c new file mode 100644 index 000000000000..9083538bd16a --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -0,0 +1,610 @@ +/* + * drivers/gpu/drm/omapdrm/omap_drv.c + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include "omap_drv.h" + +#include "drm_crtc_helper.h" +#include "drm_fb_helper.h" +#include "omap_dmm_tiler.h" + +#define DRIVER_NAME MODULE_NAME +#define DRIVER_DESC "OMAP DRM" +#define DRIVER_DATE "20110917" +#define DRIVER_MAJOR 1 +#define DRIVER_MINOR 0 +#define DRIVER_PATCHLEVEL 0 + +static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS; + +MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs"); +module_param(num_crtc, int, 0600); + +/* + * mode config funcs + */ + +/* Notes about mapping DSS and DRM entities: + * CRTC: overlay + * encoder: manager.. with some extension to allow one primary CRTC + * and zero or more video CRTC's to be mapped to one encoder? + * connector: dssdev.. manager can be attached/detached from different + * devices + */ + +static void omap_fb_output_poll_changed(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + DBG("dev=%p", dev); + if (priv->fbdev) + drm_fb_helper_hotplug_event(priv->fbdev); +} + +static const struct drm_mode_config_funcs omap_mode_config_funcs = { + .fb_create = omap_framebuffer_create, + .output_poll_changed = omap_fb_output_poll_changed, +}; + +static int get_connector_type(struct omap_dss_device *dssdev) +{ + switch (dssdev->type) { + case OMAP_DISPLAY_TYPE_HDMI: + return DRM_MODE_CONNECTOR_HDMIA; + case OMAP_DISPLAY_TYPE_DPI: + if (!strcmp(dssdev->name, "dvi")) + return DRM_MODE_CONNECTOR_DVID; + /* fallthrough */ + default: + return DRM_MODE_CONNECTOR_Unknown; + } +} + +static int omap_modeset_init(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + struct omap_dss_device *dssdev = NULL; + int num_ovls = dss_feat_get_num_ovls(); + int id; + + drm_mode_config_init(dev); + + omap_drm_irq_install(dev); + + /* + * Create private planes and CRTCs for the last NUM_CRTCs overlay + * plus manager: + */ + for (id = 0; id < min(num_crtc, num_ovls); id++) { + struct drm_plane *plane; + struct drm_crtc *crtc; + + plane = omap_plane_init(dev, id, true); + crtc = omap_crtc_init(dev, plane, pipe2chan(id), id); + + BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs)); + priv->crtcs[id] = crtc; + priv->num_crtcs++; + + priv->planes[id] = plane; + priv->num_planes++; + } + + /* + * Create normal planes for the remaining overlays: + */ + for (; id < num_ovls; id++) { + struct drm_plane *plane = omap_plane_init(dev, id, false); + + BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes)); + priv->planes[priv->num_planes++] = plane; + } + + for_each_dss_dev(dssdev) { + struct drm_connector *connector; + struct drm_encoder *encoder; + + if (!dssdev->driver) { + dev_warn(dev->dev, "%s has no driver.. skipping it\n", + dssdev->name); + return 0; + } + + if (!(dssdev->driver->get_timings || + dssdev->driver->read_edid)) { + dev_warn(dev->dev, "%s driver does not support " + "get_timings or read_edid.. skipping it!\n", + dssdev->name); + return 0; + } + + encoder = omap_encoder_init(dev, dssdev); + + if (!encoder) { + dev_err(dev->dev, "could not create encoder: %s\n", + dssdev->name); + return -ENOMEM; + } + + connector = omap_connector_init(dev, + get_connector_type(dssdev), dssdev, encoder); + + if (!connector) { + dev_err(dev->dev, "could not create connector: %s\n", + dssdev->name); + return -ENOMEM; + } + + BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders)); + BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors)); + + priv->encoders[priv->num_encoders++] = encoder; + priv->connectors[priv->num_connectors++] = connector; + + drm_mode_connector_attach_encoder(connector, encoder); + + /* figure out which crtc's we can connect the encoder to: */ + encoder->possible_crtcs = 0; + for (id = 0; id < priv->num_crtcs; id++) { + enum omap_dss_output_id supported_outputs = + dss_feat_get_supported_outputs(pipe2chan(id)); + if (supported_outputs & dssdev->output->id) + encoder->possible_crtcs |= (1 << id); + } + } + + dev->mode_config.min_width = 32; + dev->mode_config.min_height = 32; + + /* note: eventually will need some cpu_is_omapXYZ() type stuff here + * to fill in these limits properly on different OMAP generations.. + */ + dev->mode_config.max_width = 2048; + dev->mode_config.max_height = 2048; + + dev->mode_config.funcs = &omap_mode_config_funcs; + + return 0; +} + +static void omap_modeset_free(struct drm_device *dev) +{ + drm_mode_config_cleanup(dev); +} + +/* + * drm ioctl funcs + */ + + +static int ioctl_get_param(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct omap_drm_private *priv = dev->dev_private; + struct drm_omap_param *args = data; + + DBG("%p: param=%llu", dev, args->param); + + switch (args->param) { + case OMAP_PARAM_CHIPSET_ID: + args->value = priv->omaprev; + break; + default: + DBG("unknown parameter %lld", args->param); + return -EINVAL; + } + + return 0; +} + +static int ioctl_set_param(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_param *args = data; + + switch (args->param) { + default: + DBG("unknown parameter %lld", args->param); + return -EINVAL; + } + + return 0; +} + +static int ioctl_gem_new(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_new *args = data; + VERB("%p:%p: size=0x%08x, flags=%08x", dev, file_priv, + args->size.bytes, args->flags); + return omap_gem_new_handle(dev, file_priv, args->size, + args->flags, &args->handle); +} + +static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_cpu_prep *args = data; + struct drm_gem_object *obj; + int ret; + + VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) + return -ENOENT; + + ret = omap_gem_op_sync(obj, args->op); + + if (!ret) + ret = omap_gem_op_start(obj, args->op); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_cpu_fini *args = data; + struct drm_gem_object *obj; + int ret; + + VERB("%p:%p: handle=%d", dev, file_priv, args->handle); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) + return -ENOENT; + + /* XXX flushy, flushy */ + ret = 0; + + if (!ret) + ret = omap_gem_op_finish(obj, args->op); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +static int ioctl_gem_info(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + struct drm_omap_gem_info *args = data; + struct drm_gem_object *obj; + int ret = 0; + + VERB("%p:%p: handle=%d", dev, file_priv, args->handle); + + obj = drm_gem_object_lookup(dev, file_priv, args->handle); + if (!obj) + return -ENOENT; + + args->size = omap_gem_mmap_size(obj); + args->offset = omap_gem_mmap_offset(obj); + + drm_gem_object_unreference_unlocked(obj); + + return ret; +} + +struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = { + DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), + DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_UNLOCKED|DRM_AUTH), + DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_UNLOCKED|DRM_AUTH), +}; + +/* + * drm driver funcs + */ + +/** + * load - setup chip and create an initial config + * @dev: DRM device + * @flags: startup flags + * + * The driver load routine has to do several things: + * - initialize the memory manager + * - allocate initial config memory + * - setup the DRM framebuffer with the allocated memory + */ +static int dev_load(struct drm_device *dev, unsigned long flags) +{ + struct omap_drm_platform_data *pdata = dev->dev->platform_data; + struct omap_drm_private *priv; + int ret; + + DBG("load: dev=%p", dev); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev->dev, "could not allocate priv\n"); + return -ENOMEM; + } + + priv->omaprev = pdata->omaprev; + + dev->dev_private = priv; + + priv->wq = alloc_ordered_workqueue("omapdrm", 0); + + INIT_LIST_HEAD(&priv->obj_list); + + omap_gem_init(dev); + + ret = omap_modeset_init(dev); + if (ret) { + dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret); + dev->dev_private = NULL; + kfree(priv); + return ret; + } + + ret = drm_vblank_init(dev, priv->num_crtcs); + if (ret) + dev_warn(dev->dev, "could not init vblank\n"); + + priv->fbdev = omap_fbdev_init(dev); + if (!priv->fbdev) { + dev_warn(dev->dev, "omap_fbdev_init failed\n"); + /* well, limp along without an fbdev.. maybe X11 will work? */ + } + + /* store off drm_device for use in pm ops */ + dev_set_drvdata(dev->dev, dev); + + drm_kms_helper_poll_init(dev); + + return 0; +} + +static int dev_unload(struct drm_device *dev) +{ + struct omap_drm_private *priv = dev->dev_private; + + DBG("unload: dev=%p", dev); + + drm_kms_helper_poll_fini(dev); + drm_vblank_cleanup(dev); + omap_drm_irq_uninstall(dev); + + omap_fbdev_free(dev); + omap_modeset_free(dev); + omap_gem_deinit(dev); + + flush_workqueue(priv->wq); + destroy_workqueue(priv->wq); + + kfree(dev->dev_private); + dev->dev_private = NULL; + + dev_set_drvdata(dev->dev, NULL); + + return 0; +} + +static int dev_open(struct drm_device *dev, struct drm_file *file) +{ + file->driver_priv = NULL; + + DBG("open: dev=%p, file=%p", dev, file); + + return 0; +} + +static int dev_firstopen(struct drm_device *dev) +{ + DBG("firstopen: dev=%p", dev); + return 0; +} + +/** + * lastclose - clean up after all DRM clients have exited + * @dev: DRM device + * + * Take care of cleaning up after all DRM clients have exited. In the + * mode setting case, we want to restore the kernel's initial mode (just + * in case the last client left us in a bad state). + */ +static void dev_lastclose(struct drm_device *dev) +{ + int i; + + /* we don't support vga-switcheroo.. so just make sure the fbdev + * mode is active + */ + struct omap_drm_private *priv = dev->dev_private; + int ret; + + DBG("lastclose: dev=%p", dev); + + if (priv->rotation_prop) { + /* need to restore default rotation state.. not sure + * if there is a cleaner way to restore properties to + * default state? Maybe a flag that properties should + * automatically be restored to default state on + * lastclose? + */ + for (i = 0; i < priv->num_crtcs; i++) { + drm_object_property_set_value(&priv->crtcs[i]->base, + priv->rotation_prop, 0); + } + + for (i = 0; i < priv->num_planes; i++) { + drm_object_property_set_value(&priv->planes[i]->base, + priv->rotation_prop, 0); + } + } + + drm_modeset_lock_all(dev); + ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev); + drm_modeset_unlock_all(dev); + if (ret) + DBG("failed to restore crtc mode"); +} + +static void dev_preclose(struct drm_device *dev, struct drm_file *file) +{ + DBG("preclose: dev=%p", dev); +} + +static void dev_postclose(struct drm_device *dev, struct drm_file *file) +{ + DBG("postclose: dev=%p, file=%p", dev, file); +} + +static const struct vm_operations_struct omap_gem_vm_ops = { + .fault = omap_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, +}; + +static const struct file_operations omapdriver_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .unlocked_ioctl = drm_ioctl, + .release = drm_release, + .mmap = omap_gem_mmap, + .poll = drm_poll, + .fasync = drm_fasync, + .read = drm_read, + .llseek = noop_llseek, +}; + +static struct drm_driver omap_drm_driver = { + .driver_features = + DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME, + .load = dev_load, + .unload = dev_unload, + .open = dev_open, + .firstopen = dev_firstopen, + .lastclose = dev_lastclose, + .preclose = dev_preclose, + .postclose = dev_postclose, + .get_vblank_counter = drm_vblank_count, + .enable_vblank = omap_irq_enable_vblank, + .disable_vblank = omap_irq_disable_vblank, + .irq_preinstall = omap_irq_preinstall, + .irq_postinstall = omap_irq_postinstall, + .irq_uninstall = omap_irq_uninstall, + .irq_handler = omap_irq_handler, +#ifdef CONFIG_DEBUG_FS + .debugfs_init = omap_debugfs_init, + .debugfs_cleanup = omap_debugfs_cleanup, +#endif + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, + .gem_prime_export = omap_gem_prime_export, + .gem_prime_import = omap_gem_prime_import, + .gem_init_object = omap_gem_init_object, + .gem_free_object = omap_gem_free_object, + .gem_vm_ops = &omap_gem_vm_ops, + .dumb_create = omap_gem_dumb_create, + .dumb_map_offset = omap_gem_dumb_map_offset, + .dumb_destroy = omap_gem_dumb_destroy, + .ioctls = ioctls, + .num_ioctls = DRM_OMAP_NUM_IOCTLS, + .fops = &omapdriver_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static int pdev_suspend(struct platform_device *pDevice, pm_message_t state) +{ + DBG(""); + return 0; +} + +static int pdev_resume(struct platform_device *device) +{ + DBG(""); + return 0; +} + +static void pdev_shutdown(struct platform_device *device) +{ + DBG(""); +} + +static int pdev_probe(struct platform_device *device) +{ + DBG("%s", device->name); + return drm_platform_init(&omap_drm_driver, device); +} + +static int pdev_remove(struct platform_device *device) +{ + DBG(""); + drm_platform_exit(&omap_drm_driver, device); + + platform_driver_unregister(&omap_dmm_driver); + return 0; +} + +#ifdef CONFIG_PM +static const struct dev_pm_ops omapdrm_pm_ops = { + .resume = omap_gem_resume, +}; +#endif + +struct platform_driver pdev = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &omapdrm_pm_ops, +#endif + }, + .probe = pdev_probe, + .remove = pdev_remove, + .suspend = pdev_suspend, + .resume = pdev_resume, + .shutdown = pdev_shutdown, +}; + +static int __init omap_drm_init(void) +{ + DBG("init"); + if (platform_driver_register(&omap_dmm_driver)) { + /* we can continue on without DMM.. so not fatal */ + dev_err(NULL, "DMM registration failed\n"); + } + return platform_driver_register(&pdev); +} + +static void __exit omap_drm_fini(void) +{ + DBG("fini"); + platform_driver_unregister(&pdev); +} + +/* need late_initcall() so we load after dss_driver's are loaded */ +late_initcall(omap_drm_init); +module_exit(omap_drm_fini); + +MODULE_AUTHOR("Rob Clark "); +MODULE_DESCRIPTION("OMAP DRM Display Driver"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h new file mode 100644 index 000000000000..d4f997bb4ac0 --- /dev/null +++ b/drivers/gpu/drm/omapdrm/omap_drv.h @@ -0,0 +1,333 @@ +/* + * drivers/gpu/drm/omapdrm/omap_drv.h + * + * Copyright (C) 2011 Texas Instruments + * Author: Rob Clark + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#ifndef __OMAP_DRV_H__ +#define __OMAP_DRV_H__ + +#include