From b8b572e1015f81b4e748417be2629dfe51ab99f9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 1 Aug 2008 15:20:30 +1000 Subject: powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- include/asm-powerpc/8253pit.h | 10 - include/asm-powerpc/8xx_immap.h | 564 ------------- include/asm-powerpc/Kbuild | 37 - include/asm-powerpc/a.out.h | 20 - include/asm-powerpc/abs_addr.h | 75 -- include/asm-powerpc/agp.h | 22 - include/asm-powerpc/asm-compat.h | 69 -- include/asm-powerpc/atomic.h | 479 ----------- include/asm-powerpc/auxvec.h | 19 - include/asm-powerpc/backlight.h | 41 - include/asm-powerpc/bitops.h | 410 --------- include/asm-powerpc/bootx.h | 171 ---- include/asm-powerpc/btext.h | 28 - include/asm-powerpc/bug.h | 121 --- include/asm-powerpc/bugs.h | 18 - include/asm-powerpc/byteorder.h | 89 -- include/asm-powerpc/cache.h | 45 - include/asm-powerpc/cacheflush.h | 75 -- include/asm-powerpc/cell-pmu.h | 105 --- include/asm-powerpc/cell-regs.h | 315 ------- include/asm-powerpc/checksum.h | 117 --- include/asm-powerpc/clk_interface.h | 20 - include/asm-powerpc/code-patching.h | 54 -- include/asm-powerpc/compat.h | 214 ----- include/asm-powerpc/cpm.h | 106 --- include/asm-powerpc/cpm1.h | 652 --------------- include/asm-powerpc/cpm2.h | 1195 --------------------------- include/asm-powerpc/cputable.h | 514 ------------ include/asm-powerpc/cputhreads.h | 71 -- include/asm-powerpc/cputime.h | 235 ------ include/asm-powerpc/current.h | 40 - include/asm-powerpc/dbdma.h | 108 --- include/asm-powerpc/dcr-generic.h | 49 -- include/asm-powerpc/dcr-mmio.h | 61 -- include/asm-powerpc/dcr-native.h | 116 --- include/asm-powerpc/dcr-regs.h | 149 ---- include/asm-powerpc/dcr.h | 82 -- include/asm-powerpc/delay.h | 34 - include/asm-powerpc/device.h | 24 - include/asm-powerpc/div64.h | 1 - include/asm-powerpc/dma-mapping.h | 474 ----------- include/asm-powerpc/dma.h | 360 -------- include/asm-powerpc/edac.h | 40 - include/asm-powerpc/eeh.h | 211 ----- include/asm-powerpc/eeh_event.h | 53 -- include/asm-powerpc/elf.h | 424 ---------- include/asm-powerpc/emergency-restart.h | 1 - include/asm-powerpc/errno.h | 11 - include/asm-powerpc/exception.h | 311 ------- include/asm-powerpc/fb.h | 21 - include/asm-powerpc/fcntl.h | 11 - include/asm-powerpc/feature-fixups.h | 126 --- include/asm-powerpc/firmware.h | 132 --- include/asm-powerpc/fixmap.h | 106 --- include/asm-powerpc/floppy.h | 213 ----- include/asm-powerpc/fs_pd.h | 50 -- include/asm-powerpc/fsl_gtm.h | 47 -- include/asm-powerpc/fsl_lbc.h | 311 ------- include/asm-powerpc/ftrace.h | 14 - include/asm-powerpc/futex.h | 117 --- include/asm-powerpc/gpio.h | 56 -- include/asm-powerpc/grackle.h | 12 - include/asm-powerpc/hardirq.h | 29 - include/asm-powerpc/heathrow.h | 67 -- include/asm-powerpc/highmem.h | 138 ---- include/asm-powerpc/hugetlb.h | 75 -- include/asm-powerpc/hvcall.h | 296 ------- include/asm-powerpc/hvconsole.h | 41 - include/asm-powerpc/hvcserver.h | 59 -- include/asm-powerpc/hw_irq.h | 135 --- include/asm-powerpc/hydra.h | 102 --- include/asm-powerpc/i8259.h | 17 - include/asm-powerpc/ibmebus.h | 60 -- include/asm-powerpc/ide.h | 59 -- include/asm-powerpc/immap_86xx.h | 156 ---- include/asm-powerpc/immap_cpm2.h | 650 --------------- include/asm-powerpc/immap_qe.h | 485 ----------- include/asm-powerpc/io-defs.h | 60 -- include/asm-powerpc/io.h | 787 ------------------ include/asm-powerpc/ioctl.h | 13 - include/asm-powerpc/ioctls.h | 110 --- include/asm-powerpc/iommu.h | 131 --- include/asm-powerpc/ipcbuf.h | 34 - include/asm-powerpc/ipic.h | 93 --- include/asm-powerpc/irq.h | 654 --------------- include/asm-powerpc/irq_regs.h | 2 - include/asm-powerpc/irqflags.h | 44 - include/asm-powerpc/iseries/alpaca.h | 31 - include/asm-powerpc/iseries/hv_call.h | 111 --- include/asm-powerpc/iseries/hv_call_event.h | 201 ----- include/asm-powerpc/iseries/hv_call_sc.h | 50 -- include/asm-powerpc/iseries/hv_call_xm.h | 61 -- include/asm-powerpc/iseries/hv_lp_config.h | 128 --- include/asm-powerpc/iseries/hv_lp_event.h | 162 ---- include/asm-powerpc/iseries/hv_types.h | 112 --- include/asm-powerpc/iseries/iommu.h | 41 - include/asm-powerpc/iseries/it_lp_queue.h | 78 -- include/asm-powerpc/iseries/lpar_map.h | 85 -- include/asm-powerpc/iseries/mf.h | 51 -- include/asm-powerpc/iseries/vio.h | 265 ------ include/asm-powerpc/kdebug.h | 15 - include/asm-powerpc/kdump.h | 35 - include/asm-powerpc/kexec.h | 160 ---- include/asm-powerpc/keylargo.h | 261 ------ include/asm-powerpc/kgdb.h | 65 -- include/asm-powerpc/kmap_types.h | 33 - include/asm-powerpc/kprobes.h | 118 --- include/asm-powerpc/kvm.h | 55 -- include/asm-powerpc/kvm_asm.h | 55 -- include/asm-powerpc/kvm_host.h | 155 ---- include/asm-powerpc/kvm_para.h | 37 - include/asm-powerpc/kvm_ppc.h | 95 --- include/asm-powerpc/libata-portmap.h | 12 - include/asm-powerpc/linkage.h | 6 - include/asm-powerpc/lmb.h | 15 - include/asm-powerpc/local.h | 200 ----- include/asm-powerpc/lppaca.h | 159 ---- include/asm-powerpc/lv1call.h | 348 -------- include/asm-powerpc/machdep.h | 365 -------- include/asm-powerpc/macio.h | 142 ---- include/asm-powerpc/mc146818rtc.h | 36 - include/asm-powerpc/mediabay.h | 43 - include/asm-powerpc/mman.h | 63 -- include/asm-powerpc/mmu-40x.h | 63 -- include/asm-powerpc/mmu-44x.h | 76 -- include/asm-powerpc/mmu-8xx.h | 145 ---- include/asm-powerpc/mmu-fsl-booke.h | 82 -- include/asm-powerpc/mmu-hash32.h | 83 -- include/asm-powerpc/mmu-hash64.h | 478 ----------- include/asm-powerpc/mmu.h | 26 - include/asm-powerpc/mmu_context.h | 280 ------- include/asm-powerpc/mmzone.h | 47 -- include/asm-powerpc/module.h | 77 -- include/asm-powerpc/mpc512x.h | 22 - include/asm-powerpc/mpc52xx.h | 295 ------- include/asm-powerpc/mpc52xx_psc.h | 276 ------- include/asm-powerpc/mpc6xx.h | 6 - include/asm-powerpc/mpc8260.h | 25 - include/asm-powerpc/mpc86xx.h | 33 - include/asm-powerpc/mpc8xx.h | 12 - include/asm-powerpc/mpic.h | 481 ----------- include/asm-powerpc/msgbuf.h | 33 - include/asm-powerpc/mutex.h | 9 - include/asm-powerpc/nvram.h | 139 ---- include/asm-powerpc/of_device.h | 31 - include/asm-powerpc/of_platform.h | 42 - include/asm-powerpc/ohare.h | 54 -- include/asm-powerpc/oprofile_impl.h | 134 --- include/asm-powerpc/pSeries_reconfig.h | 29 - include/asm-powerpc/paca.h | 114 --- include/asm-powerpc/page.h | 225 ----- include/asm-powerpc/page_32.h | 38 - include/asm-powerpc/page_64.h | 185 ----- include/asm-powerpc/param.h | 22 - include/asm-powerpc/parport.h | 39 - include/asm-powerpc/pasemi_dma.h | 538 ------------ include/asm-powerpc/pci-bridge.h | 302 ------- include/asm-powerpc/pci.h | 228 ----- include/asm-powerpc/percpu.h | 24 - include/asm-powerpc/pgalloc-32.h | 43 - include/asm-powerpc/pgalloc-64.h | 166 ---- include/asm-powerpc/pgalloc.h | 12 - include/asm-powerpc/pgtable-4k.h | 117 --- include/asm-powerpc/pgtable-64k.h | 155 ---- include/asm-powerpc/pgtable-ppc32.h | 802 ------------------ include/asm-powerpc/pgtable-ppc64.h | 468 ----------- include/asm-powerpc/pgtable.h | 57 -- include/asm-powerpc/phyp_dump.h | 47 -- include/asm-powerpc/pmac_feature.h | 405 --------- include/asm-powerpc/pmac_low_i2c.h | 107 --- include/asm-powerpc/pmac_pfunc.h | 252 ------ include/asm-powerpc/pmc.h | 37 - include/asm-powerpc/pmi.h | 66 -- include/asm-powerpc/poll.h | 1 - include/asm-powerpc/posix_types.h | 128 --- include/asm-powerpc/ppc-pci.h | 149 ---- include/asm-powerpc/ppc4xx.h | 18 - include/asm-powerpc/ppc_asm.h | 689 --------------- include/asm-powerpc/processor.h | 314 ------- include/asm-powerpc/prom.h | 356 -------- include/asm-powerpc/ps3.h | 519 ------------ include/asm-powerpc/ps3av.h | 744 ----------------- include/asm-powerpc/ps3fb.h | 44 - include/asm-powerpc/ps3stor.h | 71 -- include/asm-powerpc/ptrace.h | 293 ------- include/asm-powerpc/qe.h | 642 -------------- include/asm-powerpc/qe_ic.h | 130 --- include/asm-powerpc/reg.h | 788 ------------------ include/asm-powerpc/reg_8xx.h | 42 - include/asm-powerpc/reg_booke.h | 501 ----------- include/asm-powerpc/reg_fsl_emb.h | 72 -- include/asm-powerpc/resource.h | 1 - include/asm-powerpc/rheap.h | 89 -- include/asm-powerpc/rio.h | 18 - include/asm-powerpc/rtas.h | 247 ------ include/asm-powerpc/rtc.h | 78 -- include/asm-powerpc/rwsem.h | 173 ---- include/asm-powerpc/scatterlist.h | 50 -- include/asm-powerpc/seccomp.h | 20 - include/asm-powerpc/sections.h | 22 - include/asm-powerpc/sembuf.h | 36 - include/asm-powerpc/serial.h | 24 - include/asm-powerpc/setjmp.h | 18 - include/asm-powerpc/setup.h | 6 - include/asm-powerpc/shmbuf.h | 59 -- include/asm-powerpc/shmparam.h | 6 - include/asm-powerpc/sigcontext.h | 87 -- include/asm-powerpc/siginfo.h | 26 - include/asm-powerpc/signal.h | 150 ---- include/asm-powerpc/smp.h | 127 --- include/asm-powerpc/smu.h | 700 ---------------- include/asm-powerpc/socket.h | 64 -- include/asm-powerpc/sockios.h | 20 - include/asm-powerpc/sparsemem.h | 32 - include/asm-powerpc/spinlock.h | 295 ------- include/asm-powerpc/spinlock_types.h | 20 - include/asm-powerpc/spu.h | 732 ---------------- include/asm-powerpc/spu_csa.h | 266 ------ include/asm-powerpc/spu_info.h | 54 -- include/asm-powerpc/spu_priv1.h | 236 ------ include/asm-powerpc/sstep.h | 27 - include/asm-powerpc/stat.h | 81 -- include/asm-powerpc/statfs.h | 60 -- include/asm-powerpc/string.h | 32 - include/asm-powerpc/suspend.h | 9 - include/asm-powerpc/synch.h | 44 - include/asm-powerpc/syscall.h | 84 -- include/asm-powerpc/syscalls.h | 52 -- include/asm-powerpc/systbl.h | 324 -------- include/asm-powerpc/system.h | 548 ------------ include/asm-powerpc/tce.h | 50 -- include/asm-powerpc/termbits.h | 209 ----- include/asm-powerpc/termios.h | 85 -- include/asm-powerpc/thread_info.h | 161 ---- include/asm-powerpc/time.h | 255 ------ include/asm-powerpc/timex.h | 50 -- include/asm-powerpc/tlb.h | 81 -- include/asm-powerpc/tlbflush.h | 166 ---- include/asm-powerpc/topology.h | 117 --- include/asm-powerpc/tsi108.h | 121 --- include/asm-powerpc/tsi108_irq.h | 124 --- include/asm-powerpc/tsi108_pci.h | 45 - include/asm-powerpc/types.h | 75 -- include/asm-powerpc/uaccess.h | 496 ----------- include/asm-powerpc/ucc.h | 64 -- include/asm-powerpc/ucc_fast.h | 246 ------ include/asm-powerpc/ucc_slow.h | 290 ------- include/asm-powerpc/ucontext.h | 40 - include/asm-powerpc/udbg.h | 55 -- include/asm-powerpc/uic.h | 23 - include/asm-powerpc/unaligned.h | 16 - include/asm-powerpc/uninorth.h | 229 ----- include/asm-powerpc/unistd.h | 398 --------- include/asm-powerpc/user.h | 51 -- include/asm-powerpc/vdso.h | 78 -- include/asm-powerpc/vdso_datapage.h | 121 --- include/asm-powerpc/vga.h | 53 -- include/asm-powerpc/vio.h | 118 --- include/asm-powerpc/xilinx_intc.h | 20 - include/asm-powerpc/xmon.h | 33 - include/asm-powerpc/xor.h | 1 - 261 files changed, 39518 deletions(-) delete mode 100644 include/asm-powerpc/8253pit.h delete mode 100644 include/asm-powerpc/8xx_immap.h delete mode 100644 include/asm-powerpc/Kbuild delete mode 100644 include/asm-powerpc/a.out.h delete mode 100644 include/asm-powerpc/abs_addr.h delete mode 100644 include/asm-powerpc/agp.h delete mode 100644 include/asm-powerpc/asm-compat.h delete mode 100644 include/asm-powerpc/atomic.h delete mode 100644 include/asm-powerpc/auxvec.h delete mode 100644 include/asm-powerpc/backlight.h delete mode 100644 include/asm-powerpc/bitops.h delete mode 100644 include/asm-powerpc/bootx.h delete mode 100644 include/asm-powerpc/btext.h delete mode 100644 include/asm-powerpc/bug.h delete mode 100644 include/asm-powerpc/bugs.h delete mode 100644 include/asm-powerpc/byteorder.h delete mode 100644 include/asm-powerpc/cache.h delete mode 100644 include/asm-powerpc/cacheflush.h delete mode 100644 include/asm-powerpc/cell-pmu.h delete mode 100644 include/asm-powerpc/cell-regs.h delete mode 100644 include/asm-powerpc/checksum.h delete mode 100644 include/asm-powerpc/clk_interface.h delete mode 100644 include/asm-powerpc/code-patching.h delete mode 100644 include/asm-powerpc/compat.h delete mode 100644 include/asm-powerpc/cpm.h delete mode 100644 include/asm-powerpc/cpm1.h delete mode 100644 include/asm-powerpc/cpm2.h delete mode 100644 include/asm-powerpc/cputable.h delete mode 100644 include/asm-powerpc/cputhreads.h delete mode 100644 include/asm-powerpc/cputime.h delete mode 100644 include/asm-powerpc/current.h delete mode 100644 include/asm-powerpc/dbdma.h delete mode 100644 include/asm-powerpc/dcr-generic.h delete mode 100644 include/asm-powerpc/dcr-mmio.h delete mode 100644 include/asm-powerpc/dcr-native.h delete mode 100644 include/asm-powerpc/dcr-regs.h delete mode 100644 include/asm-powerpc/dcr.h delete mode 100644 include/asm-powerpc/delay.h delete mode 100644 include/asm-powerpc/device.h delete mode 100644 include/asm-powerpc/div64.h delete mode 100644 include/asm-powerpc/dma-mapping.h delete mode 100644 include/asm-powerpc/dma.h delete mode 100644 include/asm-powerpc/edac.h delete mode 100644 include/asm-powerpc/eeh.h delete mode 100644 include/asm-powerpc/eeh_event.h delete mode 100644 include/asm-powerpc/elf.h delete mode 100644 include/asm-powerpc/emergency-restart.h delete mode 100644 include/asm-powerpc/errno.h delete mode 100644 include/asm-powerpc/exception.h delete mode 100644 include/asm-powerpc/fb.h delete mode 100644 include/asm-powerpc/fcntl.h delete mode 100644 include/asm-powerpc/feature-fixups.h delete mode 100644 include/asm-powerpc/firmware.h delete mode 100644 include/asm-powerpc/fixmap.h delete mode 100644 include/asm-powerpc/floppy.h delete mode 100644 include/asm-powerpc/fs_pd.h delete mode 100644 include/asm-powerpc/fsl_gtm.h delete mode 100644 include/asm-powerpc/fsl_lbc.h delete mode 100644 include/asm-powerpc/ftrace.h delete mode 100644 include/asm-powerpc/futex.h delete mode 100644 include/asm-powerpc/gpio.h delete mode 100644 include/asm-powerpc/grackle.h delete mode 100644 include/asm-powerpc/hardirq.h delete mode 100644 include/asm-powerpc/heathrow.h delete mode 100644 include/asm-powerpc/highmem.h delete mode 100644 include/asm-powerpc/hugetlb.h delete mode 100644 include/asm-powerpc/hvcall.h delete mode 100644 include/asm-powerpc/hvconsole.h delete mode 100644 include/asm-powerpc/hvcserver.h delete mode 100644 include/asm-powerpc/hw_irq.h delete mode 100644 include/asm-powerpc/hydra.h delete mode 100644 include/asm-powerpc/i8259.h delete mode 100644 include/asm-powerpc/ibmebus.h delete mode 100644 include/asm-powerpc/ide.h delete mode 100644 include/asm-powerpc/immap_86xx.h delete mode 100644 include/asm-powerpc/immap_cpm2.h delete mode 100644 include/asm-powerpc/immap_qe.h delete mode 100644 include/asm-powerpc/io-defs.h delete mode 100644 include/asm-powerpc/io.h delete mode 100644 include/asm-powerpc/ioctl.h delete mode 100644 include/asm-powerpc/ioctls.h delete mode 100644 include/asm-powerpc/iommu.h delete mode 100644 include/asm-powerpc/ipcbuf.h delete mode 100644 include/asm-powerpc/ipic.h delete mode 100644 include/asm-powerpc/irq.h delete mode 100644 include/asm-powerpc/irq_regs.h delete mode 100644 include/asm-powerpc/irqflags.h delete mode 100644 include/asm-powerpc/iseries/alpaca.h delete mode 100644 include/asm-powerpc/iseries/hv_call.h delete mode 100644 include/asm-powerpc/iseries/hv_call_event.h delete mode 100644 include/asm-powerpc/iseries/hv_call_sc.h delete mode 100644 include/asm-powerpc/iseries/hv_call_xm.h delete mode 100644 include/asm-powerpc/iseries/hv_lp_config.h delete mode 100644 include/asm-powerpc/iseries/hv_lp_event.h delete mode 100644 include/asm-powerpc/iseries/hv_types.h delete mode 100644 include/asm-powerpc/iseries/iommu.h delete mode 100644 include/asm-powerpc/iseries/it_lp_queue.h delete mode 100644 include/asm-powerpc/iseries/lpar_map.h delete mode 100644 include/asm-powerpc/iseries/mf.h delete mode 100644 include/asm-powerpc/iseries/vio.h delete mode 100644 include/asm-powerpc/kdebug.h delete mode 100644 include/asm-powerpc/kdump.h delete mode 100644 include/asm-powerpc/kexec.h delete mode 100644 include/asm-powerpc/keylargo.h delete mode 100644 include/asm-powerpc/kgdb.h delete mode 100644 include/asm-powerpc/kmap_types.h delete mode 100644 include/asm-powerpc/kprobes.h delete mode 100644 include/asm-powerpc/kvm.h delete mode 100644 include/asm-powerpc/kvm_asm.h delete mode 100644 include/asm-powerpc/kvm_host.h delete mode 100644 include/asm-powerpc/kvm_para.h delete mode 100644 include/asm-powerpc/kvm_ppc.h delete mode 100644 include/asm-powerpc/libata-portmap.h delete mode 100644 include/asm-powerpc/linkage.h delete mode 100644 include/asm-powerpc/lmb.h delete mode 100644 include/asm-powerpc/local.h delete mode 100644 include/asm-powerpc/lppaca.h delete mode 100644 include/asm-powerpc/lv1call.h delete mode 100644 include/asm-powerpc/machdep.h delete mode 100644 include/asm-powerpc/macio.h delete mode 100644 include/asm-powerpc/mc146818rtc.h delete mode 100644 include/asm-powerpc/mediabay.h delete mode 100644 include/asm-powerpc/mman.h delete mode 100644 include/asm-powerpc/mmu-40x.h delete mode 100644 include/asm-powerpc/mmu-44x.h delete mode 100644 include/asm-powerpc/mmu-8xx.h delete mode 100644 include/asm-powerpc/mmu-fsl-booke.h delete mode 100644 include/asm-powerpc/mmu-hash32.h delete mode 100644 include/asm-powerpc/mmu-hash64.h delete mode 100644 include/asm-powerpc/mmu.h delete mode 100644 include/asm-powerpc/mmu_context.h delete mode 100644 include/asm-powerpc/mmzone.h delete mode 100644 include/asm-powerpc/module.h delete mode 100644 include/asm-powerpc/mpc512x.h delete mode 100644 include/asm-powerpc/mpc52xx.h delete mode 100644 include/asm-powerpc/mpc52xx_psc.h delete mode 100644 include/asm-powerpc/mpc6xx.h delete mode 100644 include/asm-powerpc/mpc8260.h delete mode 100644 include/asm-powerpc/mpc86xx.h delete mode 100644 include/asm-powerpc/mpc8xx.h delete mode 100644 include/asm-powerpc/mpic.h delete mode 100644 include/asm-powerpc/msgbuf.h delete mode 100644 include/asm-powerpc/mutex.h delete mode 100644 include/asm-powerpc/nvram.h delete mode 100644 include/asm-powerpc/of_device.h delete mode 100644 include/asm-powerpc/of_platform.h delete mode 100644 include/asm-powerpc/ohare.h delete mode 100644 include/asm-powerpc/oprofile_impl.h delete mode 100644 include/asm-powerpc/pSeries_reconfig.h delete mode 100644 include/asm-powerpc/paca.h delete mode 100644 include/asm-powerpc/page.h delete mode 100644 include/asm-powerpc/page_32.h delete mode 100644 include/asm-powerpc/page_64.h delete mode 100644 include/asm-powerpc/param.h delete mode 100644 include/asm-powerpc/parport.h delete mode 100644 include/asm-powerpc/pasemi_dma.h delete mode 100644 include/asm-powerpc/pci-bridge.h delete mode 100644 include/asm-powerpc/pci.h delete mode 100644 include/asm-powerpc/percpu.h delete mode 100644 include/asm-powerpc/pgalloc-32.h delete mode 100644 include/asm-powerpc/pgalloc-64.h delete mode 100644 include/asm-powerpc/pgalloc.h delete mode 100644 include/asm-powerpc/pgtable-4k.h delete mode 100644 include/asm-powerpc/pgtable-64k.h delete mode 100644 include/asm-powerpc/pgtable-ppc32.h delete mode 100644 include/asm-powerpc/pgtable-ppc64.h delete mode 100644 include/asm-powerpc/pgtable.h delete mode 100644 include/asm-powerpc/phyp_dump.h delete mode 100644 include/asm-powerpc/pmac_feature.h delete mode 100644 include/asm-powerpc/pmac_low_i2c.h delete mode 100644 include/asm-powerpc/pmac_pfunc.h delete mode 100644 include/asm-powerpc/pmc.h delete mode 100644 include/asm-powerpc/pmi.h delete mode 100644 include/asm-powerpc/poll.h delete mode 100644 include/asm-powerpc/posix_types.h delete mode 100644 include/asm-powerpc/ppc-pci.h delete mode 100644 include/asm-powerpc/ppc4xx.h delete mode 100644 include/asm-powerpc/ppc_asm.h delete mode 100644 include/asm-powerpc/processor.h delete mode 100644 include/asm-powerpc/prom.h delete mode 100644 include/asm-powerpc/ps3.h delete mode 100644 include/asm-powerpc/ps3av.h delete mode 100644 include/asm-powerpc/ps3fb.h delete mode 100644 include/asm-powerpc/ps3stor.h delete mode 100644 include/asm-powerpc/ptrace.h delete mode 100644 include/asm-powerpc/qe.h delete mode 100644 include/asm-powerpc/qe_ic.h delete mode 100644 include/asm-powerpc/reg.h delete mode 100644 include/asm-powerpc/reg_8xx.h delete mode 100644 include/asm-powerpc/reg_booke.h delete mode 100644 include/asm-powerpc/reg_fsl_emb.h delete mode 100644 include/asm-powerpc/resource.h delete mode 100644 include/asm-powerpc/rheap.h delete mode 100644 include/asm-powerpc/rio.h delete mode 100644 include/asm-powerpc/rtas.h delete mode 100644 include/asm-powerpc/rtc.h delete mode 100644 include/asm-powerpc/rwsem.h delete mode 100644 include/asm-powerpc/scatterlist.h delete mode 100644 include/asm-powerpc/seccomp.h delete mode 100644 include/asm-powerpc/sections.h delete mode 100644 include/asm-powerpc/sembuf.h delete mode 100644 include/asm-powerpc/serial.h delete mode 100644 include/asm-powerpc/setjmp.h delete mode 100644 include/asm-powerpc/setup.h delete mode 100644 include/asm-powerpc/shmbuf.h delete mode 100644 include/asm-powerpc/shmparam.h delete mode 100644 include/asm-powerpc/sigcontext.h delete mode 100644 include/asm-powerpc/siginfo.h delete mode 100644 include/asm-powerpc/signal.h delete mode 100644 include/asm-powerpc/smp.h delete mode 100644 include/asm-powerpc/smu.h delete mode 100644 include/asm-powerpc/socket.h delete mode 100644 include/asm-powerpc/sockios.h delete mode 100644 include/asm-powerpc/sparsemem.h delete mode 100644 include/asm-powerpc/spinlock.h delete mode 100644 include/asm-powerpc/spinlock_types.h delete mode 100644 include/asm-powerpc/spu.h delete mode 100644 include/asm-powerpc/spu_csa.h delete mode 100644 include/asm-powerpc/spu_info.h delete mode 100644 include/asm-powerpc/spu_priv1.h delete mode 100644 include/asm-powerpc/sstep.h delete mode 100644 include/asm-powerpc/stat.h delete mode 100644 include/asm-powerpc/statfs.h delete mode 100644 include/asm-powerpc/string.h delete mode 100644 include/asm-powerpc/suspend.h delete mode 100644 include/asm-powerpc/synch.h delete mode 100644 include/asm-powerpc/syscall.h delete mode 100644 include/asm-powerpc/syscalls.h delete mode 100644 include/asm-powerpc/systbl.h delete mode 100644 include/asm-powerpc/system.h delete mode 100644 include/asm-powerpc/tce.h delete mode 100644 include/asm-powerpc/termbits.h delete mode 100644 include/asm-powerpc/termios.h delete mode 100644 include/asm-powerpc/thread_info.h delete mode 100644 include/asm-powerpc/time.h delete mode 100644 include/asm-powerpc/timex.h delete mode 100644 include/asm-powerpc/tlb.h delete mode 100644 include/asm-powerpc/tlbflush.h delete mode 100644 include/asm-powerpc/topology.h delete mode 100644 include/asm-powerpc/tsi108.h delete mode 100644 include/asm-powerpc/tsi108_irq.h delete mode 100644 include/asm-powerpc/tsi108_pci.h delete mode 100644 include/asm-powerpc/types.h delete mode 100644 include/asm-powerpc/uaccess.h delete mode 100644 include/asm-powerpc/ucc.h delete mode 100644 include/asm-powerpc/ucc_fast.h delete mode 100644 include/asm-powerpc/ucc_slow.h delete mode 100644 include/asm-powerpc/ucontext.h delete mode 100644 include/asm-powerpc/udbg.h delete mode 100644 include/asm-powerpc/uic.h delete mode 100644 include/asm-powerpc/unaligned.h delete mode 100644 include/asm-powerpc/uninorth.h delete mode 100644 include/asm-powerpc/unistd.h delete mode 100644 include/asm-powerpc/user.h delete mode 100644 include/asm-powerpc/vdso.h delete mode 100644 include/asm-powerpc/vdso_datapage.h delete mode 100644 include/asm-powerpc/vga.h delete mode 100644 include/asm-powerpc/vio.h delete mode 100644 include/asm-powerpc/xilinx_intc.h delete mode 100644 include/asm-powerpc/xmon.h delete mode 100644 include/asm-powerpc/xor.h (limited to 'include') diff --git a/include/asm-powerpc/8253pit.h b/include/asm-powerpc/8253pit.h deleted file mode 100644 index b70d6e53b303..000000000000 --- a/include/asm-powerpc/8253pit.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_POWERPC_8253PIT_H -#define _ASM_POWERPC_8253PIT_H - -/* - * 8253/8254 Programmable Interval Timer - */ - -#define PIT_TICK_RATE 1193182UL - -#endif /* _ASM_POWERPC_8253PIT_H */ diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h deleted file mode 100644 index 4b0e15206006..000000000000 --- a/include/asm-powerpc/8xx_immap.h +++ /dev/null @@ -1,564 +0,0 @@ -/* - * MPC8xx Internal Memory Map - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * The I/O on the MPC860 is comprised of blocks of special registers - * and the dual port ram for the Communication Processor Module. - * Within this space are functional units such as the SIU, memory - * controller, system timers, and other control functions. It is - * a combination that I found difficult to separate into logical - * functional files.....but anyone else is welcome to try. -- Dan - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_8XX__ -#define __IMMAP_8XX__ - -/* System configuration registers. -*/ -typedef struct sys_conf { - uint sc_siumcr; - uint sc_sypcr; - uint sc_swt; - char res1[2]; - ushort sc_swsr; - uint sc_sipend; - uint sc_simask; - uint sc_siel; - uint sc_sivec; - uint sc_tesr; - char res2[0xc]; - uint sc_sdcr; - char res3[0x4c]; -} sysconf8xx_t; - -/* PCMCIA configuration registers. -*/ -typedef struct pcmcia_conf { - uint pcmc_pbr0; - uint pcmc_por0; - uint pcmc_pbr1; - uint pcmc_por1; - uint pcmc_pbr2; - uint pcmc_por2; - uint pcmc_pbr3; - uint pcmc_por3; - uint pcmc_pbr4; - uint pcmc_por4; - uint pcmc_pbr5; - uint pcmc_por5; - uint pcmc_pbr6; - uint pcmc_por6; - uint pcmc_pbr7; - uint pcmc_por7; - char res1[0x20]; - uint pcmc_pgcra; - uint pcmc_pgcrb; - uint pcmc_pscr; - char res2[4]; - uint pcmc_pipr; - char res3[4]; - uint pcmc_per; - char res4[4]; -} pcmconf8xx_t; - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - uint memc_br0; - uint memc_or0; - uint memc_br1; - uint memc_or1; - uint memc_br2; - uint memc_or2; - uint memc_br3; - uint memc_or3; - uint memc_br4; - uint memc_or4; - uint memc_br5; - uint memc_or5; - uint memc_br6; - uint memc_or6; - uint memc_br7; - uint memc_or7; - char res1[0x24]; - uint memc_mar; - uint memc_mcr; - char res2[4]; - uint memc_mamr; - uint memc_mbmr; - ushort memc_mstat; - ushort memc_mptpr; - uint memc_mdr; - char res3[0x80]; -} memctl8xx_t; - -/*----------------------------------------------------------------------- - * BR - Memory Controler: Base Register 16-9 - */ -#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ -#define BR_AT_MSK 0x00007000 /* Address Type Mask */ -#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ -#define BR_PS_32 0x00000000 /* 32 bit port size */ -#define BR_PS_16 0x00000800 /* 16 bit port size */ -#define BR_PS_8 0x00000400 /* 8 bit port size */ -#define BR_PARE 0x00000200 /* Parity Enable */ -#define BR_WP 0x00000100 /* Write Protect */ -#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ -#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ -#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ -#define BR_V 0x00000001 /* Bank Valid */ - -/*----------------------------------------------------------------------- - * OR - Memory Controler: Option Register 16-11 - */ -#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ -#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ -#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ - /* Address Multiplex */ -#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ -#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ -#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ -#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ -#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ -#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ -#define OR_BI 0x00000100 /* Burst inhibit */ -#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ -#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ -#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ -#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ -#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ -#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ -#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ -#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ -#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ -#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ -#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ -#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ -#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ -#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ -#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ -#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ -#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ -#define OR_TRLX 0x00000004 /* Timing Relaxed */ -#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - ushort sit_tbscr; - char res0[0x02]; - uint sit_tbreff0; - uint sit_tbreff1; - char res1[0x14]; - ushort sit_rtcsc; - char res2[0x02]; - uint sit_rtc; - uint sit_rtsec; - uint sit_rtcal; - char res3[0x10]; - ushort sit_piscr; - char res4[2]; - uint sit_pitc; - uint sit_pitr; - char res5[0x34]; -} sit8xx_t; - -#define TBSCR_TBIRQ_MASK ((ushort)0xff00) -#define TBSCR_REFA ((ushort)0x0080) -#define TBSCR_REFB ((ushort)0x0040) -#define TBSCR_REFAE ((ushort)0x0008) -#define TBSCR_REFBE ((ushort)0x0004) -#define TBSCR_TBF ((ushort)0x0002) -#define TBSCR_TBE ((ushort)0x0001) - -#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) -#define RTCSC_SEC ((ushort)0x0080) -#define RTCSC_ALR ((ushort)0x0040) -#define RTCSC_38K ((ushort)0x0010) -#define RTCSC_SIE ((ushort)0x0008) -#define RTCSC_ALE ((ushort)0x0004) -#define RTCSC_RTF ((ushort)0x0002) -#define RTCSC_RTE ((ushort)0x0001) - -#define PISCR_PIRQ_MASK ((ushort)0xff00) -#define PISCR_PS ((ushort)0x0080) -#define PISCR_PIE ((ushort)0x0004) -#define PISCR_PTF ((ushort)0x0002) -#define PISCR_PTE ((ushort)0x0001) - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - uint car_sccr; - uint car_plprcr; - uint car_rsr; - char res[0x74]; /* Reserved area */ -} car8xx_t; - -/* System Integration Timers keys. -*/ -typedef struct sitk { - uint sitk_tbscrk; - uint sitk_tbreff0k; - uint sitk_tbreff1k; - uint sitk_tbk; - char res1[0x10]; - uint sitk_rtcsck; - uint sitk_rtck; - uint sitk_rtseck; - uint sitk_rtcalk; - char res2[0x10]; - uint sitk_piscrk; - uint sitk_pitck; - char res3[0x38]; -} sitk8xx_t; - -/* Clocks and reset keys. -*/ -typedef struct cark { - uint cark_sccrk; - uint cark_plprcrk; - uint cark_rsrk; - char res[0x474]; -} cark8xx_t; - -/* The key to unlock registers maintained by keep-alive power. -*/ -#define KAPWR_KEY ((unsigned int)0x55ccaa33) - -/* Video interface. MPC823 Only. -*/ -typedef struct vid823 { - ushort vid_vccr; - ushort res1; - u_char vid_vsr; - u_char res2; - u_char vid_vcmr; - u_char res3; - uint vid_vbcb; - uint res4; - uint vid_vfcr0; - uint vid_vfaa0; - uint vid_vfba0; - uint vid_vfcr1; - uint vid_vfaa1; - uint vid_vfba1; - u_char res5[0x18]; -} vid823_t; - -/* LCD interface. 823 Only. -*/ -typedef struct lcd { - uint lcd_lccr; - uint lcd_lchcr; - uint lcd_lcvcr; - char res1[4]; - uint lcd_lcfaa; - uint lcd_lcfba; - char lcd_lcsr; - char res2[0x7]; -} lcd823_t; - -/* I2C -*/ -typedef struct i2c { - u_char i2c_i2mod; - char res1[3]; - u_char i2c_i2add; - char res2[3]; - u_char i2c_i2brg; - char res3[3]; - u_char i2c_i2com; - char res4[3]; - u_char i2c_i2cer; - char res5[3]; - u_char i2c_i2cmr; - char res6[0x8b]; -} i2c8xx_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - char res1[4]; - uint sdma_sdar; - u_char sdma_sdsr; - char res3[3]; - u_char sdma_sdmr; - char res4[3]; - u_char sdma_idsr1; - char res5[3]; - u_char sdma_idmr1; - char res6[3]; - u_char sdma_idsr2; - char res7[3]; - u_char sdma_idmr2; - char res8[0x13]; -} sdma8xx_t; - -/* Communication Processor Module Interrupt Controller. -*/ -typedef struct cpm_ic { - ushort cpic_civr; - char res[0xe]; - uint cpic_cicr; - uint cpic_cipr; - uint cpic_cimr; - uint cpic_cisr; -} cpic8xx_t; - -/* Input/Output Port control/status registers. -*/ -typedef struct io_port { - ushort iop_padir; - ushort iop_papar; - ushort iop_paodr; - ushort iop_padat; - char res1[8]; - ushort iop_pcdir; - ushort iop_pcpar; - ushort iop_pcso; - ushort iop_pcdat; - ushort iop_pcint; - char res2[6]; - ushort iop_pddir; - ushort iop_pdpar; - char res3[2]; - ushort iop_pddat; - uint utmode; - char res4[4]; -} iop8xx_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - ushort cpmt_tgcr; - char res1[0xe]; - ushort cpmt_tmr1; - ushort cpmt_tmr2; - ushort cpmt_trr1; - ushort cpmt_trr2; - ushort cpmt_tcr1; - ushort cpmt_tcr2; - ushort cpmt_tcn1; - ushort cpmt_tcn2; - ushort cpmt_tmr3; - ushort cpmt_tmr4; - ushort cpmt_trr3; - ushort cpmt_trr4; - ushort cpmt_tcr3; - ushort cpmt_tcr4; - ushort cpmt_tcn3; - ushort cpmt_tcn4; - ushort cpmt_ter1; - ushort cpmt_ter2; - ushort cpmt_ter3; - ushort cpmt_ter4; - char res2[8]; -} cpmtimer8xx_t; - -/* Finally, the Communication Processor stuff..... -*/ -typedef struct scc { /* Serial communication channels */ - uint scc_gsmrl; - uint scc_gsmrh; - ushort scc_psmr; - char res1[2]; - ushort scc_todr; - ushort scc_dsr; - ushort scc_scce; - char res2[2]; - ushort scc_sccm; - char res3; - u_char scc_sccs; - char res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - char res1[2]; - ushort smc_smcmr; - char res2[2]; - u_char smc_smce; - char res3[3]; - u_char smc_smcm; - char res4[5]; -} smc_t; - -/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but - * it fits within the address space. - */ - -typedef struct fec { - uint fec_addr_low; /* lower 32 bits of station address */ - ushort fec_addr_high; /* upper 16 bits of station address */ - ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res6[17]; /* reserved */ - uint fec_fun_code; /* fec SDMA function code */ - uint res7[3]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x1e]; /* reserved */ -} fec_t; - -/* The FEC and LCD color map share the same address space.... - * I guess we will never see an 823T :-). - */ -union fec_lcd { - fec_t fl_un_fec; - u_char fl_un_cmap[0x200]; -}; - -typedef struct comm_proc { - /* General control and status registers. - */ - ushort cp_cpcr; - u_char res1[2]; - ushort cp_rccr; - u_char res2; - u_char cp_rmds; - u_char res3[4]; - ushort cp_cpmcr1; - ushort cp_cpmcr2; - ushort cp_cpmcr3; - ushort cp_cpmcr4; - u_char res4[2]; - ushort cp_rter; - u_char res5[2]; - ushort cp_rtmr; - u_char res6[0x14]; - - /* Baud rate generators. - */ - uint cp_brgc1; - uint cp_brgc2; - uint cp_brgc3; - uint cp_brgc4; - - /* Serial Communication Channels. - */ - scc_t cp_scc[4]; - - /* Serial Management Channels. - */ - smc_t cp_smc[2]; - - /* Serial Peripheral Interface. - */ - ushort cp_spmode; - u_char res7[4]; - u_char cp_spie; - u_char res8[3]; - u_char cp_spim; - u_char res9[2]; - u_char cp_spcom; - u_char res10[2]; - - /* Parallel Interface Port. - */ - u_char res11[2]; - ushort cp_pipc; - u_char res12[2]; - ushort cp_ptpr; - uint cp_pbdir; - uint cp_pbpar; - u_char res13[2]; - ushort cp_pbodr; - uint cp_pbdat; - - /* Port E - MPC87x/88x only. - */ - uint cp_pedir; - uint cp_pepar; - uint cp_peso; - uint cp_peodr; - uint cp_pedat; - - /* Communications Processor Timing Register - - Contains RMII Timing for the FECs on MPC87x/88x only. - */ - uint cp_cptr; - - /* Serial Interface and Time Slot Assignment. - */ - uint cp_simode; - u_char cp_sigmr; - u_char res15; - u_char cp_sistr; - u_char cp_sicmr; - u_char res16[4]; - uint cp_sicr; - uint cp_sirp; - u_char res17[0xc]; - - /* 256 bytes of MPC823 video controller RAM array. - */ - u_char cp_vcram[0x100]; - u_char cp_siram[0x200]; - - /* The fast ethernet controller is not really part of the CPM, - * but it resides in the address space. - * The LCD color map is also here. - */ - union fec_lcd fl_un; -#define cp_fec fl_un.fl_un_fec -#define lcd_cmap fl_un.fl_un_cmap - char res18[0xE00]; - - /* The DUET family has a second FEC here */ - fec_t cp_fec2; -#define cp_fec1 cp_fec /* consistency macro */ - - /* Dual Ported RAM follows. - * There are many different formats for this memory area - * depending upon the devices used and options chosen. - * Some processors don't have all of it populated. - */ - u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ - u_char cp_dparam[0x400]; /* Parameter RAM */ -} cpm8xx_t; - -/* Internal memory map. -*/ -typedef struct immap { - sysconf8xx_t im_siu_conf; /* SIU Configuration */ - pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ - memctl8xx_t im_memctl; /* Memory Controller */ - sit8xx_t im_sit; /* System integration timers */ - car8xx_t im_clkrst; /* Clocks and reset */ - sitk8xx_t im_sitk; /* Sys int timer keys */ - cark8xx_t im_clkrstk; /* Clocks and reset keys */ - vid823_t im_vid; /* Video (823 only) */ - lcd823_t im_lcd; /* LCD (823 only) */ - i2c8xx_t im_i2c; /* I2C control/status */ - sdma8xx_t im_sdma; /* SDMA control/status */ - cpic8xx_t im_cpic; /* CPM Interrupt Controller */ - iop8xx_t im_ioport; /* IO Port control/status */ - cpmtimer8xx_t im_cpmtimer; /* CPM timers */ - cpm8xx_t im_cpm; /* Communication processor */ -} immap_t; - -#endif /* __IMMAP_8XX__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild deleted file mode 100644 index 5ab7d7fe198c..000000000000 --- a/include/asm-powerpc/Kbuild +++ /dev/null @@ -1,37 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += auxvec.h -header-y += ioctls.h -header-y += sembuf.h -header-y += siginfo.h -header-y += stat.h -header-y += errno.h -header-y += ipcbuf.h -header-y += msgbuf.h -header-y += shmbuf.h -header-y += socket.h -header-y += termbits.h -header-y += fcntl.h -header-y += poll.h -header-y += sockios.h -header-y += ucontext.h -header-y += ioctl.h -header-y += linkage.h -header-y += resource.h -header-y += sigcontext.h -header-y += statfs.h -header-y += ps3fb.h - -unifdef-y += bootx.h -unifdef-y += byteorder.h -unifdef-y += cputable.h -unifdef-y += elf.h -unifdef-y += nvram.h -unifdef-y += param.h -unifdef-y += posix_types.h -unifdef-y += seccomp.h -unifdef-y += signal.h -unifdef-y += spu_info.h -unifdef-y += termios.h -unifdef-y += types.h -unifdef-y += unistd.h diff --git a/include/asm-powerpc/a.out.h b/include/asm-powerpc/a.out.h deleted file mode 100644 index 89cead6b176e..000000000000 --- a/include/asm-powerpc/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_A_OUT_H -#define _ASM_POWERPC_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* _ASM_POWERPC_A_OUT_H */ diff --git a/include/asm-powerpc/abs_addr.h b/include/asm-powerpc/abs_addr.h deleted file mode 100644 index 98324c5a8286..000000000000 --- a/include/asm-powerpc/abs_addr.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_ABS_ADDR_H -#define _ASM_POWERPC_ABS_ADDR_H -#ifdef __KERNEL__ - - -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#include -#include -#include -#include - -struct mschunks_map { - unsigned long num_chunks; - unsigned long chunk_size; - unsigned long chunk_shift; - unsigned long chunk_mask; - u32 *mapping; -}; - -extern struct mschunks_map mschunks_map; - -/* Chunks are 256 KB */ -#define MSCHUNKS_CHUNK_SHIFT (18) -#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT) -#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1) - -static inline unsigned long chunk_to_addr(unsigned long chunk) -{ - return chunk << MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long addr_to_chunk(unsigned long addr) -{ - return addr >> MSCHUNKS_CHUNK_SHIFT; -} - -static inline unsigned long phys_to_abs(unsigned long pa) -{ - unsigned long chunk; - - /* This is a no-op on non-iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return pa; - - chunk = addr_to_chunk(pa); - - if (chunk < mschunks_map.num_chunks) - chunk = mschunks_map.mapping[chunk]; - - return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); -} - -/* Convenience macros */ -#define virt_to_abs(va) phys_to_abs(__pa(va)) -#define abs_to_virt(aa) __va(aa) - -/* - * Converts Virtual Address to Real Address for - * Legacy iSeries Hypervisor calls - */ -#define iseries_hv_addr(virtaddr) \ - (0x8000000000000000 | virt_to_abs(virtaddr)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/include/asm-powerpc/agp.h b/include/asm-powerpc/agp.h deleted file mode 100644 index 86455c4c31ee..000000000000 --- a/include/asm-powerpc/agp.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_AGP_H -#define _ASM_POWERPC_AGP_H -#ifdef __KERNEL__ - -#include - -#define map_page_into_agp(page) -#define unmap_page_from_agp(page) -#define flush_agp_cache() mb() - -/* Convert a physical address to an address suitable for the GART. */ -#define phys_to_gart(x) (x) -#define gart_to_phys(x) (x) - -/* GATT allocation. Returns/accepts GATT kernel virtual address. */ -#define alloc_gatt_pages(order) \ - ((char *)__get_free_pages(GFP_KERNEL, (order))) -#define free_gatt_pages(table, order) \ - free_pages((unsigned long)(table), (order)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_AGP_H */ diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h deleted file mode 100644 index 8f0fe7971949..000000000000 --- a/include/asm-powerpc/asm-compat.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _ASM_POWERPC_ASM_COMPAT_H -#define _ASM_POWERPC_ASM_COMPAT_H - -#include - -#ifdef __ASSEMBLY__ -# define stringify_in_c(...) __VA_ARGS__ -# define ASM_CONST(x) x -#else -/* This version of stringify will deal with commas... */ -# define __stringify_in_c(...) #__VA_ARGS__ -# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " -# define __ASM_CONST(x) x##UL -# define ASM_CONST(x) __ASM_CONST(x) -#endif - - -#ifdef __powerpc64__ - -/* operations for longs and pointers */ -#define PPC_LL stringify_in_c(ld) -#define PPC_STL stringify_in_c(std) -#define PPC_LCMPI stringify_in_c(cmpdi) -#define PPC_LONG stringify_in_c(.llong) -#define PPC_LONG_ALIGN stringify_in_c(.balign 8) -#define PPC_TLNEI stringify_in_c(tdnei) -#define PPC_LLARX stringify_in_c(ldarx) -#define PPC_STLCX stringify_in_c(stdcx.) -#define PPC_CNTLZL stringify_in_c(cntlzd) - -/* Move to CR, single-entry optimized version. Only available - * on POWER4 and later. - */ -#ifdef CONFIG_POWER4_ONLY -#define PPC_MTOCRF stringify_in_c(mtocrf) -#else -#define PPC_MTOCRF stringify_in_c(mtcrf) -#endif - -#else /* 32-bit */ - -/* operations for longs and pointers */ -#define PPC_LL stringify_in_c(lwz) -#define PPC_STL stringify_in_c(stw) -#define PPC_LCMPI stringify_in_c(cmpwi) -#define PPC_LONG stringify_in_c(.long) -#define PPC_LONG_ALIGN stringify_in_c(.balign 4) -#define PPC_TLNEI stringify_in_c(twnei) -#define PPC_LLARX stringify_in_c(lwarx) -#define PPC_STLCX stringify_in_c(stwcx.) -#define PPC_CNTLZL stringify_in_c(cntlzw) -#define PPC_MTOCRF stringify_in_c(mtcrf) - -#endif - -#ifdef __KERNEL__ -#ifdef CONFIG_IBM405_ERR77 -/* Erratum #77 on the 405 means we need a sync or dcbt before every - * stwcx. The old ATOMIC_SYNC_FIX covered some but not all of this. - */ -#define PPC405_ERR77(ra,rb) stringify_in_c(dcbt ra, rb;) -#define PPC405_ERR77_SYNC stringify_in_c(sync;) -#else -#define PPC405_ERR77(ra,rb) -#define PPC405_ERR77_SYNC -#endif -#endif - -#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h deleted file mode 100644 index f3fc733758f5..000000000000 --- a/include/asm-powerpc/atomic.h +++ /dev/null @@ -1,479 +0,0 @@ -#ifndef _ASM_POWERPC_ATOMIC_H_ -#define _ASM_POWERPC_ATOMIC_H_ - -/* - * PowerPC atomic operations - */ - -typedef struct { int counter; } atomic_t; - -#ifdef __KERNEL__ -#include -#include -#include -#include - -#define ATOMIC_INIT(i) { (i) } - -static __inline__ int atomic_read(const atomic_t *v) -{ - int t; - - __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); - - return t; -} - -static __inline__ void atomic_set(atomic_t *v, int i) -{ - __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); -} - -static __inline__ void atomic_add(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_add\n\ - add %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_add_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # atomic_add_return\n\ - add %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -static __inline__ void atomic_sub(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%3 # atomic_sub\n\ - subf %0,%2,%0\n" - PPC405_ERR77(0,%3) -" stwcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_sub_return(int a, atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # atomic_sub_return\n\ - subf %0,%1,%0\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -static __inline__ void atomic_inc(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_inc\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%2 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_inc_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -static __inline__ void atomic_dec(atomic_t *v) -{ - int t; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 # atomic_dec\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%2)\ -" stwcx. %0,0,%2\n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ int atomic_dec_return(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic_add_unless - add unless the number is a given value - * @v: pointer of type atomic_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) -{ - int t; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_add_unless\n\ - cmpw 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" - PPC405_ERR77(0,%2) -" stwcx. %0,0,%1 \n\ - bne- 1b \n" - ISYNC_ON_SMP -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&v->counter), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -#define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) - -/* - * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1, even if - * the atomic variable, v, was not decremented. - */ -static __inline__ int atomic_dec_if_positive(atomic_t *v) -{ - int t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ - cmpwi %0,1\n\ - addi %0,%0,-1\n\ - blt- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" : "=&b" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - -#ifdef __powerpc64__ - -typedef struct { long counter; } atomic64_t; - -#define ATOMIC64_INIT(i) { (i) } - -static __inline__ long atomic64_read(const atomic64_t *v) -{ - long t; - - __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); - - return t; -} - -static __inline__ void atomic64_set(atomic64_t *v, long i) -{ - __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); -} - -static __inline__ void atomic64_add(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # atomic64_add\n\ - add %0,%2,%0\n\ - stdcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_add_return(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # atomic64_add_return\n\ - add %0,%1,%0\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0) - -static __inline__ void atomic64_sub(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%3 # atomic64_sub\n\ - subf %0,%2,%0\n\ - stdcx. %0,0,%3 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (a), "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_sub_return(long a, atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # atomic64_sub_return\n\ - subf %0,%1,%0\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (a), "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -static __inline__ void atomic64_inc(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 # atomic64_inc\n\ - addic %0,%0,1\n\ - stdcx. %0,0,%2 \n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_inc_return(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_inc_return\n\ - addic %0,%0,1\n\ - stdcx. %0,0,%1 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -/* - * atomic64_inc_and_test - increment and test - * @v: pointer of type atomic64_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) - -static __inline__ void atomic64_dec(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 # atomic64_dec\n\ - addic %0,%0,-1\n\ - stdcx. %0,0,%2\n\ - bne- 1b" - : "=&r" (t), "+m" (v->counter) - : "r" (&v->counter) - : "cc"); -} - -static __inline__ long atomic64_dec_return(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_dec_return\n\ - addic %0,%0,-1\n\ - stdcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0) -#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) - -/* - * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1. - */ -static __inline__ long atomic64_dec_if_positive(atomic64_t *v) -{ - long t; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ - addic. %0,%0,-1\n\ - blt- 2f\n\ - stdcx. %0,0,%1\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" : "=&r" (t) - : "r" (&v->counter) - : "cc", "memory"); - - return t; -} - -#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) - -/** - * atomic64_add_unless - add unless the number is a given value - * @v: pointer of type atomic64_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @v, so long as it was not @u. - * Returns non-zero if @v was not @u, and zero otherwise. - */ -static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) -{ - long t; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: ldarx %0,0,%1 # atomic_add_unless\n\ - cmpd 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" -" stdcx. %0,0,%1 \n\ - bne- 1b \n" - ISYNC_ON_SMP -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&v->counter), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#endif /* __powerpc64__ */ - -#include -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_ATOMIC_H_ */ diff --git a/include/asm-powerpc/auxvec.h b/include/asm-powerpc/auxvec.h deleted file mode 100644 index 19a099b62cd6..000000000000 --- a/include/asm-powerpc/auxvec.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_POWERPC_AUXVEC_H -#define _ASM_POWERPC_AUXVEC_H - -/* - * We need to put in some extra aux table entries to tell glibc what - * the cache block size is, so it can use the dcbz instruction safely. - */ -#define AT_DCACHEBSIZE 19 -#define AT_ICACHEBSIZE 20 -#define AT_UCACHEBSIZE 21 -/* A special ignored type value for PPC, for glibc compatibility. */ -#define AT_IGNOREPPC 22 - -/* The vDSO location. We have to use the same value as x86 for glibc's - * sake :-) - */ -#define AT_SYSINFO_EHDR 33 - -#endif diff --git a/include/asm-powerpc/backlight.h b/include/asm-powerpc/backlight.h deleted file mode 100644 index 8cf5c37c3817..000000000000 --- a/include/asm-powerpc/backlight.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Routines for handling backlight control on PowerBooks - * - * For now, implementation resides in - * arch/powerpc/platforms/powermac/backlight.c - * - */ -#ifndef __ASM_POWERPC_BACKLIGHT_H -#define __ASM_POWERPC_BACKLIGHT_H -#ifdef __KERNEL__ - -#include -#include - -/* For locking instructions, see the implementation file */ -extern struct backlight_device *pmac_backlight; -extern struct mutex pmac_backlight_mutex; - -extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); - -extern int pmac_has_backlight_type(const char *type); - -extern void pmac_backlight_key(int direction); -static inline void pmac_backlight_key_up(void) -{ - pmac_backlight_key(0); -} -static inline void pmac_backlight_key_down(void) -{ - pmac_backlight_key(1); -} - -extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); -extern int pmac_backlight_set_legacy_brightness(int brightness); -extern int pmac_backlight_get_legacy_brightness(void); - -extern void pmac_backlight_enable(void); -extern void pmac_backlight_disable(void); - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h deleted file mode 100644 index 897eade3afbe..000000000000 --- a/include/asm-powerpc/bitops.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * PowerPC atomic bit operations. - * - * Merged version by David Gibson . - * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don - * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They - * originally took it from the ppc32 code. - * - * Within a word, bits are numbered LSB first. Lot's of places make - * this assumption by directly testing bits with (val & (1< 1 word) bitmaps on a - * big-endian system because, unlike little endian, the number of each - * bit depends on the word size. - * - * The bitop functions are defined to work on unsigned longs, so for a - * ppc64 system the bits end up numbered: - * |63..............0|127............64|191...........128|255...........196| - * and on ppc32: - * |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224| - * - * There are a few little-endian macros used mostly for filesystem - * bitmaps, these work on similar bit arrays layouts, but - * byte-oriented: - * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| - * - * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit - * number field needs to be reversed compared to the big-endian bit - * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_BITOPS_H -#define _ASM_POWERPC_BITOPS_H - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only can be included directly -#endif - -#include -#include -#include - -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - -#define BITOP_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) -#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) -#define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7) - -static __inline__ void set_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bit\n" - "or %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ void clear_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # clear_bit\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # clear_bit_unlock\n" - "andc %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc", "memory"); -} - -static __inline__ void change_bit(int nr, volatile unsigned long *addr) -{ - unsigned long old; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # change_bit\n" - "xor %0,%0,%2\n" - PPC405_ERR77(0,%3) - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*p) - : "r" (mask), "r" (p) - : "cc" ); -} - -static __inline__ int test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_set_bit_lock(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # test_and_set_bit_lock\n" - "or %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_clear_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_clear_bit\n" - "andc %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ int test_and_change_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long old, t; - unsigned long mask = BITOP_MASK(nr); - unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr); - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1:" PPC_LLARX "%0,0,%3 # test_and_change_bit\n" - "xor %1,%0,%2 \n" - PPC405_ERR77(0,%3) - PPC_STLCX "%1,0,%3 \n" - "bne- 1b" - ISYNC_ON_SMP - : "=&r" (old), "=&r" (t) - : "r" (mask), "r" (p) - : "cc", "memory"); - - return (old & mask) != 0; -} - -static __inline__ void set_bits(unsigned long mask, unsigned long *addr) -{ - unsigned long old; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%3 # set_bits\n" - "or %0,%0,%2\n" - PPC_STLCX "%0,0,%3\n" - "bne- 1b" - : "=&r" (old), "+m" (*addr) - : "r" (mask), "r" (addr) - : "cc"); -} - -#include - -static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) -{ - __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory"); - __clear_bit(nr, addr); -} - -/* - * Return the zero-based bit position (LE, not IBM bit numbering) of - * the most significant 1-bit in a double word. - */ -static __inline__ __attribute__((const)) -int __ilog2(unsigned long x) -{ - int lz; - - asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x)); - return BITS_PER_LONG - 1 - lz; -} - -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); - return 31 - bit; -} - -#ifdef __powerpc64__ -static inline __attribute__((const)) -int __ilog2_u64(u64 n) -{ - int bit; - asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); - return 63 - bit; -} -#endif - -/* - * Determines the bit position of the least significant 0 bit in the - * specified double word. The returned bit position will be - * zero-based, starting from the right side (63/31 - 0). - */ -static __inline__ unsigned long ffz(unsigned long x) -{ - /* no zero exists anywhere in the 8 byte area. */ - if ((x = ~x) == 0) - return BITS_PER_LONG; - - /* - * Calculate the bit position of the least signficant '1' bit in x - * (since x has been changed this will actually be the least signficant - * '0' bit in * the original x). Note: (x & -x) gives us a mask that - * is the least significant * (RIGHT-most) 1-bit of the value in x. - */ - return __ilog2(x & -x); -} - -static __inline__ int __ffs(unsigned long x) -{ - return __ilog2(x & -x); -} - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - */ -static __inline__ int ffs(int x) -{ - unsigned long i = (unsigned long)x; - return __ilog2(i & -i) + 1; -} - -/* - * fls: find last (most-significant) bit set. - * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. - */ -static __inline__ int fls(unsigned int x) -{ - int lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x)); - return 32 - lz; -} - -static __inline__ unsigned long __fls(unsigned long x) -{ - return __ilog2(x); -} - -/* - * 64-bit can do this using one cntlzd (count leading zeroes doubleword) - * instruction; for 32-bit we use the generic version, which does two - * 32-bit fls calls. - */ -#ifdef __powerpc64__ -static __inline__ int fls64(__u64 x) -{ - int lz; - - asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x)); - return 64 - lz; -} -#else -#include -#endif /* __powerpc64__ */ - -#include -#include - -/* Little-endian versions */ - -static __inline__ int test_le_bit(unsigned long nr, - __const__ unsigned long *addr) -{ - __const__ unsigned char *tmp = (__const__ unsigned char *) addr; - return (tmp[nr >> 3] >> (nr & 7)) & 1; -} - -#define __set_le_bit(nr, addr) \ - __set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define __clear_le_bit(nr, addr) \ - __clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define test_and_set_le_bit(nr, addr) \ - test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define test_and_clear_le_bit(nr, addr) \ - test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define __test_and_set_le_bit(nr, addr) \ - __test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) -#define __test_and_clear_le_bit(nr, addr) \ - __test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr)) - -#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0) -unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); - -unsigned long generic_find_next_le_bit(const unsigned long *addr, - unsigned long size, unsigned long offset); -/* Bitmap functions for the ext2 filesystem */ - -#define ext2_set_bit(nr,addr) \ - __test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit(nr, addr) \ - __test_and_clear_le_bit((nr), (unsigned long*)addr) - -#define ext2_set_bit_atomic(lock, nr, addr) \ - test_and_set_le_bit((nr), (unsigned long*)addr) -#define ext2_clear_bit_atomic(lock, nr, addr) \ - test_and_clear_le_bit((nr), (unsigned long*)addr) - -#define ext2_test_bit(nr, addr) test_le_bit((nr),(unsigned long*)addr) - -#define ext2_find_first_zero_bit(addr, size) \ - find_first_zero_le_bit((unsigned long*)addr, size) -#define ext2_find_next_zero_bit(addr, size, off) \ - generic_find_next_zero_le_bit((unsigned long*)addr, size, off) - -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)addr, size, off) -/* Bitmap functions for the minix filesystem. */ - -#define minix_test_and_set_bit(nr,addr) \ - __test_and_set_le_bit(nr, (unsigned long *)addr) -#define minix_set_bit(nr,addr) \ - __set_le_bit(nr, (unsigned long *)addr) -#define minix_test_and_clear_bit(nr,addr) \ - __test_and_clear_le_bit(nr, (unsigned long *)addr) -#define minix_test_bit(nr,addr) \ - test_le_bit(nr, (unsigned long *)addr) - -#define minix_find_first_zero_bit(addr,size) \ - find_first_zero_le_bit((unsigned long *)addr, size) - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/include/asm-powerpc/bootx.h b/include/asm-powerpc/bootx.h deleted file mode 100644 index 57b82e3f89ce..000000000000 --- a/include/asm-powerpc/bootx.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * This file describes the structure passed from the BootX application - * (for MacOS) when it is used to boot Linux. - * - * Written by Benjamin Herrenschmidt. - */ - - -#ifndef __ASM_BOOTX_H__ -#define __ASM_BOOTX_H__ - -#include - -#ifdef macintosh -#include -#include "linux_type_defs.h" -#endif - -#ifdef macintosh -/* All this requires PowerPC alignment */ -#pragma options align=power -#endif - -/* On kernel entry: - * - * r3 = 0x426f6f58 ('BooX') - * r4 = pointer to boot_infos - * r5 = NULL - * - * Data and instruction translation disabled, interrupts - * disabled, kernel loaded at physical 0x00000000 on PCI - * machines (will be different on NuBus). - */ - -#define BOOT_INFO_VERSION 5 -#define BOOT_INFO_COMPATIBLE_VERSION 1 - -/* Bit in the architecture flag mask. More to be defined in - future versions. Note that either BOOT_ARCH_PCI or - BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are - set additionally when BOOT_ARCH_NUBUS is set. - */ -#define BOOT_ARCH_PCI 0x00000001UL -#define BOOT_ARCH_NUBUS 0x00000002UL -#define BOOT_ARCH_NUBUS_PDM 0x00000010UL -#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL -#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL - -/* Maximum number of ranges in phys memory map */ -#define MAX_MEM_MAP_SIZE 26 - -/* This is the format of an element in the physical memory map. Note that - the map is optional and current BootX will only build it for pre-PCI - machines */ -typedef struct boot_info_map_entry -{ - __u32 physAddr; /* Physical starting address */ - __u32 size; /* Size in bytes */ -} boot_info_map_entry_t; - - -/* Here are the boot informations that are passed to the bootstrap - * Note that the kernel arguments and the device tree are appended - * at the end of this structure. */ -typedef struct boot_infos -{ - /* Version of this structure */ - __u32 version; - /* backward compatible down to version: */ - __u32 compatible_version; - - /* NEW (vers. 2) this holds the current _logical_ base addr of - the frame buffer (for use by early boot message) */ - __u8* logicalDisplayBase; - - /* NEW (vers. 4) Apple's machine identification */ - __u32 machineID; - - /* NEW (vers. 4) Detected hw architecture */ - __u32 architecture; - - /* The device tree (internal addresses relative to the beginning of the tree, - * device tree offset relative to the beginning of this structure). - * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this - * field is 0. - */ - __u32 deviceTreeOffset; /* Device tree offset */ - __u32 deviceTreeSize; /* Size of the device tree */ - - /* Some infos about the current MacOS display */ - __u32 dispDeviceRect[4]; /* left,top,right,bottom */ - __u32 dispDeviceDepth; /* (8, 16 or 32) */ - __u8* dispDeviceBase; /* base address (physical) */ - __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */ - __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */ - /* Optional offset in the registry to the current - * MacOS display. (Can be 0 when not detected) */ - __u32 dispDeviceRegEntryOffset; - - /* Optional pointer to boot ramdisk (offset from this structure) */ - __u32 ramDisk; - __u32 ramDiskSize; /* size of ramdisk image */ - - /* Kernel command line arguments (offset from this structure) */ - __u32 kernelParamsOffset; - - /* ALL BELOW NEW (vers. 4) */ - - /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag - (non-PCI) only. On PCI, memory is contiguous and it's size is in the - device-tree. */ - boot_info_map_entry_t - physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */ - __u32 physMemoryMapSize; /* How many entries in map */ - - - /* The framebuffer size (optional, currently 0) */ - __u32 frameBufferSize; /* Represents a max size, can be 0. */ - - /* NEW (vers. 5) */ - - /* Total params size (args + colormap + device tree + ramdisk) */ - __u32 totalParamsSize; - -} boot_infos_t; - -#ifdef __KERNEL__ -/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index - * is represented by 3 short words containing a 16 bits (unsigned) color - * component. Later versions may contain the gamma table for direct-color - * devices here. - */ -#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) - -/* BootX passes the device-tree using a format that comes from earlier - * ppc32 kernels. This used to match what is in prom.h, but not anymore - * so we now define it here - */ -struct bootx_dt_prop { - u32 name; - int length; - u32 value; - u32 next; -}; - -struct bootx_dt_node { - u32 unused0; - u32 unused1; - u32 phandle; /* not really available */ - u32 unused2; - u32 unused3; - u32 unused4; - u32 unused5; - u32 full_name; - u32 properties; - u32 parent; - u32 child; - u32 sibling; - u32 next; - u32 allnext; -}; - -extern void bootx_init(unsigned long r4, unsigned long phys); - -#endif /* __KERNEL__ */ - -#ifdef macintosh -#pragma options align=reset -#endif - -#endif diff --git a/include/asm-powerpc/btext.h b/include/asm-powerpc/btext.h deleted file mode 100644 index 906f46e31006..000000000000 --- a/include/asm-powerpc/btext.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Definitions for using the procedures in btext.c. - * - * Benjamin Herrenschmidt - */ -#ifndef __PPC_BTEXT_H -#define __PPC_BTEXT_H -#ifdef __KERNEL__ - -extern int btext_find_display(int allow_nonstdout); -extern void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch); -extern void btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address); -extern void btext_prepare_BAT(void); -extern void btext_unmap(void); - -extern void btext_drawchar(char c); -extern void btext_drawstring(const char *str); -extern void btext_drawhex(unsigned long v); -extern void btext_drawtext(const char *c, unsigned int len); - -extern void btext_clearscreen(void); -extern void btext_flushscreen(void); -extern void btext_flushline(void); - -#endif /* __KERNEL__ */ -#endif /* __PPC_BTEXT_H */ diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h deleted file mode 100644 index e55d1f66b86f..000000000000 --- a/include/asm-powerpc/bug.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _ASM_POWERPC_BUG_H -#define _ASM_POWERPC_BUG_H -#ifdef __KERNEL__ - -#include -/* - * Define an illegal instr to trap on the bug. - * We don't use 0 because that marks the end of a function - * in the ELF ABI. That's "Boo Boo" in case you wonder... - */ -#define BUG_OPCODE .long 0x00b00b00 /* For asm */ -#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */ - -#ifdef CONFIG_BUG - -#ifdef __ASSEMBLY__ -#ifdef CONFIG_DEBUG_BUGVERBOSE -.macro EMIT_BUG_ENTRY addr,file,line,flags - .section __bug_table,"a" -5001: PPC_LONG \addr, 5002f - .short \line, \flags - .org 5001b+BUG_ENTRY_SIZE - .previous - .section .rodata,"a" -5002: .asciz "\file" - .previous -.endm -#else - .macro EMIT_BUG_ENTRY addr,file,line,flags - .section __bug_table,"a" -5001: PPC_LONG \addr - .short \flags - .org 5001b+BUG_ENTRY_SIZE - .previous -.endm -#endif /* verbose */ - -#else /* !__ASSEMBLY__ */ -/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and - sizeof(struct bug_entry), respectively */ -#ifdef CONFIG_DEBUG_BUGVERBOSE -#define _EMIT_BUG_ENTRY \ - ".section __bug_table,\"a\"\n" \ - "2:\t" PPC_LONG "1b, %0\n" \ - "\t.short %1, %2\n" \ - ".org 2b+%3\n" \ - ".previous\n" -#else -#define _EMIT_BUG_ENTRY \ - ".section __bug_table,\"a\"\n" \ - "2:\t" PPC_LONG "1b\n" \ - "\t.short %2\n" \ - ".org 2b+%3\n" \ - ".previous\n" -#endif - -/* - * BUG_ON() and WARN_ON() do their best to cooperate with compile-time - * optimisations. However depending on the complexity of the condition - * some compiler versions may not produce optimal results. - */ - -#define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (0), "i" (sizeof(struct bug_entry))); \ - for(;;) ; \ -} while (0) - -#define BUG_ON(x) do { \ - if (__builtin_constant_p(x)) { \ - if (x) \ - BUG(); \ - } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ - "i" (sizeof(struct bug_entry)), \ - "r" ((__force long)(x))); \ - } \ -} while (0) - -#define __WARN() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry))); \ -} while (0) - -#define WARN_ON(x) ({ \ - int __ret_warn_on = !!(x); \ - if (__builtin_constant_p(__ret_warn_on)) { \ - if (__ret_warn_on) \ - __WARN(); \ - } else { \ - __asm__ __volatile__( \ - "1: "PPC_TLNEI" %4,0\n" \ - _EMIT_BUG_ENTRY \ - : : "i" (__FILE__), "i" (__LINE__), \ - "i" (BUGFLAG_WARNING), \ - "i" (sizeof(struct bug_entry)), \ - "r" (__ret_warn_on)); \ - } \ - unlikely(__ret_warn_on); \ -}) - -#define HAVE_ARCH_BUG -#define HAVE_ARCH_BUG_ON -#define HAVE_ARCH_WARN_ON -#endif /* __ASSEMBLY __ */ -#endif /* CONFIG_BUG */ - -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_BUG_H */ diff --git a/include/asm-powerpc/bugs.h b/include/asm-powerpc/bugs.h deleted file mode 100644 index 42fdb73e3068..000000000000 --- a/include/asm-powerpc/bugs.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _ASM_POWERPC_BUGS_H -#define _ASM_POWERPC_BUGS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * This file is included by 'init/main.c' to check for - * architecture-dependent bugs. - */ - -static inline void check_bugs(void) { } - -#endif /* _ASM_POWERPC_BUGS_H */ diff --git a/include/asm-powerpc/byteorder.h b/include/asm-powerpc/byteorder.h deleted file mode 100644 index b37752214a16..000000000000 --- a/include/asm-powerpc/byteorder.h +++ /dev/null @@ -1,89 +0,0 @@ -#ifndef _ASM_POWERPC_BYTEORDER_H -#define _ASM_POWERPC_BYTEORDER_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -#ifdef __GNUC__ -#ifdef __KERNEL__ - -static __inline__ __u16 ld_le16(const volatile __u16 *addr) -{ - __u16 val; - - __asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -static __inline__ void st_le16(volatile __u16 *addr, const __u16 val) -{ - __asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -static __inline__ __u32 ld_le32(const volatile __u32 *addr) -{ - __u32 val; - - __asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr)); - return val; -} - -static __inline__ void st_le32(volatile __u32 *addr, const __u32 val) -{ - __asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr)); -} - -static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value) -{ - __u16 result; - - __asm__("rlwimi %0,%1,8,16,23" - : "=r" (result) - : "r" (value), "0" (value >> 8)); - return result; -} - -static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value) -{ - __u32 result; - - __asm__("rlwimi %0,%1,24,16,23\n\t" - "rlwimi %0,%1,8,8,15\n\t" - "rlwimi %0,%1,24,0,7" - : "=r" (result) - : "r" (value), "0" (value >> 24)); - return result; -} - -#define __arch__swab16(x) ___arch__swab16(x) -#define __arch__swab32(x) ___arch__swab32(x) - -/* The same, but returns converted value from the location pointer by addr. */ -#define __arch__swab16p(addr) ld_le16(addr) -#define __arch__swab32p(addr) ld_le32(addr) - -/* The same, but do the conversion in situ, ie. put the value back to addr. */ -#define __arch__swab16s(addr) st_le16(addr,*addr) -#define __arch__swab32s(addr) st_le32(addr,*addr) - -#endif /* __KERNEL__ */ - -#ifndef __STRICT_ANSI__ -#define __BYTEORDER_HAS_U64__ -#ifndef __powerpc64__ -#define __SWAB_64_THRU_32__ -#endif /* __powerpc64__ */ -#endif /* __STRICT_ANSI__ */ - -#endif /* __GNUC__ */ - -#include - -#endif /* _ASM_POWERPC_BYTEORDER_H */ diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h deleted file mode 100644 index 81de6eb3455d..000000000000 --- a/include/asm-powerpc/cache.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef _ASM_POWERPC_CACHE_H -#define _ASM_POWERPC_CACHE_H - -#ifdef __KERNEL__ - - -/* bytes per L1 cache line */ -#if defined(CONFIG_8xx) || defined(CONFIG_403GCX) -#define L1_CACHE_SHIFT 4 -#define MAX_COPY_PREFETCH 1 -#elif defined(CONFIG_PPC_E500MC) -#define L1_CACHE_SHIFT 6 -#define MAX_COPY_PREFETCH 4 -#elif defined(CONFIG_PPC32) -#define L1_CACHE_SHIFT 5 -#define MAX_COPY_PREFETCH 4 -#else /* CONFIG_PPC64 */ -#define L1_CACHE_SHIFT 7 -#endif - -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define SMP_CACHE_BYTES L1_CACHE_BYTES - -#if defined(__powerpc64__) && !defined(__ASSEMBLY__) -struct ppc64_caches { - u32 dsize; /* L1 d-cache size */ - u32 dline_size; /* L1 d-cache line size */ - u32 log_dline_size; - u32 dlines_per_page; - u32 isize; /* L1 i-cache size */ - u32 iline_size; /* L1 i-cache line size */ - u32 log_iline_size; - u32 ilines_per_page; -}; - -extern struct ppc64_caches ppc64_caches; -#endif /* __powerpc64__ && ! __ASSEMBLY__ */ - -#if !defined(__ASSEMBLY__) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/include/asm-powerpc/cacheflush.h b/include/asm-powerpc/cacheflush.h deleted file mode 100644 index ba667a383b8c..000000000000 --- a/include/asm-powerpc/cacheflush.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_CACHEFLUSH_H -#define _ASM_POWERPC_CACHEFLUSH_H - -#ifdef __KERNEL__ - -#include -#include - -/* - * No cache flushing is required when address mappings are changed, - * because the caches on PowerPCs are physically addressed. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_icache_page(vma, page) do { } while (0) -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -extern void flush_dcache_page(struct page *page); -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -extern void __flush_icache_range(unsigned long, unsigned long); -static inline void flush_icache_range(unsigned long start, unsigned long stop) -{ - if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) - __flush_icache_range(start, stop); -} - -extern void flush_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long addr, - int len); -extern void __flush_dcache_icache(void *page_va); -extern void flush_dcache_icache_page(struct page *page); -#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE) -extern void __flush_dcache_icache_phys(unsigned long physaddr); -#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */ - -extern void flush_dcache_range(unsigned long start, unsigned long stop); -#ifdef CONFIG_PPC32 -extern void clean_dcache_range(unsigned long start, unsigned long stop); -extern void invalidate_dcache_range(unsigned long start, unsigned long stop); -#endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 -extern void flush_inval_dcache_range(unsigned long start, unsigned long stop); -extern void flush_dcache_phys_range(unsigned long start, unsigned long stop); -#endif - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ - } while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - - - -#ifdef CONFIG_DEBUG_PAGEALLOC -/* internal debugging function */ -void kernel_map_pages(struct page *page, int numpages, int enable); -#endif - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/include/asm-powerpc/cell-pmu.h b/include/asm-powerpc/cell-pmu.h deleted file mode 100644 index 8066eede3a0c..000000000000 --- a/include/asm-powerpc/cell-pmu.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Cell Broadband Engine Performance Monitor - * - * (C) Copyright IBM Corporation 2006 - * - * Author: - * David Erb (djerb@us.ibm.com) - * Kevin Corry (kevcorry@us.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_CELL_PMU_H__ -#define __ASM_CELL_PMU_H__ - -/* The Cell PMU has four hardware performance counters, which can be - * configured as four 32-bit counters or eight 16-bit counters. - */ -#define NR_PHYS_CTRS 4 -#define NR_CTRS (NR_PHYS_CTRS * 2) - -/* Macros for the pm_control register. */ -#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) -#define CBE_PM_ENABLE_PERF_MON 0x80000000 -#define CBE_PM_STOP_AT_MAX 0x40000000 -#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) -#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) -#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) -#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 -#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 - -/* Macros for the trace_address register. */ -#define CBE_PM_TRACE_BUF_FULL 0x00000800 -#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 -#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) -#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 - -/* Macros for the pm07_control registers. */ -#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) -#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 -#define CBE_PM_CTR_POLARITY 0x01000000 -#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 -#define CBE_PM_CTR_ENABLE 0x00400000 -#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) -#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) -#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) -#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) -#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) - -/* Macros for the pm_status register. */ -#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) - -enum pm_reg_name { - group_control, - debug_bus_control, - trace_address, - ext_tr_timer, - pm_status, - pm_control, - pm_interval, - pm_start_stop, -}; - -/* Routines for reading/writing the PMU registers. */ -extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); -extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); -extern u32 cbe_read_ctr(u32 cpu, u32 ctr); -extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); - -extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); -extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); -extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); -extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); - -extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); -extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); - -extern void cbe_enable_pm(u32 cpu); -extern void cbe_disable_pm(u32 cpu); - -extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); - -extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); -extern void cbe_disable_pm_interrupts(u32 cpu); -extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); -extern void cbe_sync_irq(int node); - -#define CBE_COUNT_SUPERVISOR_MODE 0 -#define CBE_COUNT_HYPERVISOR_MODE 1 -#define CBE_COUNT_PROBLEM_MODE 2 -#define CBE_COUNT_ALL_MODES 3 - -#endif /* __ASM_CELL_PMU_H__ */ diff --git a/include/asm-powerpc/cell-regs.h b/include/asm-powerpc/cell-regs.h deleted file mode 100644 index fd6fd00434ef..000000000000 --- a/include/asm-powerpc/cell-regs.h +++ /dev/null @@ -1,315 +0,0 @@ -/* - * cbe_regs.h - * - * This file is intended to hold the various register definitions for CBE - * on-chip system devices (memory controller, IO controller, etc...) - * - * (C) Copyright IBM Corporation 2001,2006 - * - * Authors: Maximino Aguilar (maguilar@us.ibm.com) - * David J. Erb (djerb@us.ibm.com) - * - * (c) 2006 Benjamin Herrenschmidt , IBM Corp. - */ - -#ifndef CBE_REGS_H -#define CBE_REGS_H - -#include - -/* - * - * Some HID register definitions - * - */ - -/* CBE specific HID0 bits */ -#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul -#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul -#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul -#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul - -#define MAX_CBE 2 - -/* - * - * Pervasive unit register definitions - * - */ - -union spe_reg { - u64 val; - u8 spe[8]; -}; - -union ppe_spe_reg { - u64 val; - struct { - u32 ppe; - u32 spe; - }; -}; - - -struct cbe_pmd_regs { - /* Debug Bus Control */ - u64 pad_0x0000; /* 0x0000 */ - - u64 group_control; /* 0x0008 */ - - u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ - - u64 debug_bus_control; /* 0x00a8 */ - - u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ - - u64 trace_aux_data; /* 0x0100 */ - u64 trace_buffer_0_63; /* 0x0108 */ - u64 trace_buffer_64_127; /* 0x0110 */ - u64 trace_address; /* 0x0118 */ - u64 ext_tr_timer; /* 0x0120 */ - - u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ - - /* Performance Monitor */ - u64 pm_status; /* 0x0400 */ - u64 pm_control; /* 0x0408 */ - u64 pm_interval; /* 0x0410 */ - u64 pm_ctr[4]; /* 0x0418 */ - u64 pm_start_stop; /* 0x0438 */ - u64 pm07_control[8]; /* 0x0440 */ - - u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ - - /* Thermal Sensor Registers */ - union spe_reg ts_ctsr1; /* 0x0800 */ - u64 ts_ctsr2; /* 0x0808 */ - union spe_reg ts_mtsr1; /* 0x0810 */ - u64 ts_mtsr2; /* 0x0818 */ - union spe_reg ts_itr1; /* 0x0820 */ - u64 ts_itr2; /* 0x0828 */ - u64 ts_gitr; /* 0x0830 */ - u64 ts_isr; /* 0x0838 */ - u64 ts_imr; /* 0x0840 */ - union spe_reg tm_cr1; /* 0x0848 */ - u64 tm_cr2; /* 0x0850 */ - u64 tm_simr; /* 0x0858 */ - union ppe_spe_reg tm_tpr; /* 0x0860 */ - union spe_reg tm_str1; /* 0x0868 */ - u64 tm_str2; /* 0x0870 */ - union ppe_spe_reg tm_tsr; /* 0x0878 */ - - /* Power Management */ - u64 pmcr; /* 0x0880 */ -#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 - u64 pmsr; /* 0x0888 */ - - /* Time Base Register */ - u64 tbr; /* 0x0890 */ - - u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ - - /* Fault Isolation Registers */ - u64 checkstop_fir; /* 0x0c00 */ - u64 recoverable_fir; /* 0x0c08 */ - u64 spec_att_mchk_fir; /* 0x0c10 */ - u32 fir_mode_reg; /* 0x0c18 */ - u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ -#define CBE_PMD_FIR_MODE_M8 0x00800 - u64 fir_enable_mask; /* 0x0c20 */ - - u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ - u64 ras_esc_0; /* 0x0ca8 */ - u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ -}; - -extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); -extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); - -/* - * PMU shadow registers - * - * Many of the registers in the performance monitoring unit are write-only, - * so we need to save a copy of what we write to those registers. - * - * The actual data counters are read/write. However, writing to the counters - * only takes effect if the PMU is enabled. Otherwise the value is stored in - * a hardware latch until the next time the PMU is enabled. So we save a copy - * of the counter values if we need to read them back while the PMU is - * disabled. The counter_value_in_latch field is a bitmap indicating which - * counters currently have a value waiting to be written. - */ - -struct cbe_pmd_shadow_regs { - u32 group_control; - u32 debug_bus_control; - u32 trace_address; - u32 ext_tr_timer; - u32 pm_status; - u32 pm_control; - u32 pm_interval; - u32 pm_start_stop; - u32 pm07_control[NR_CTRS]; - - u32 pm_ctr[NR_PHYS_CTRS]; - u32 counter_value_in_latch; -}; - -extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); -extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); - -/* - * - * IIC unit register definitions - * - */ - -struct cbe_iic_pending_bits { - u32 data; - u8 flags; - u8 class; - u8 source; - u8 prio; -}; - -#define CBE_IIC_IRQ_VALID 0x80 -#define CBE_IIC_IRQ_IPI 0x40 - -struct cbe_iic_thread_regs { - struct cbe_iic_pending_bits pending; - struct cbe_iic_pending_bits pending_destr; - u64 generate; - u64 prio; -}; - -struct cbe_iic_regs { - u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ - - /* IIC interrupt registers */ - struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ - - u64 iic_ir; /* 0x0440 */ -#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) -#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) -#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) -#define CBE_IIC_IR_IOC_0 0x0 -#define CBE_IIC_IR_IOC_1S 0xb -#define CBE_IIC_IR_PT_0 0xe -#define CBE_IIC_IR_PT_1 0xf - - u64 iic_is; /* 0x0448 */ -#define CBE_IIC_IS_PMI 0x2 - - u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ - - /* IOC FIR */ - u64 ioc_fir_reset; /* 0x0500 */ - u64 ioc_fir_set; /* 0x0508 */ - u64 ioc_checkstop_enable; /* 0x0510 */ - u64 ioc_fir_error_mask; /* 0x0518 */ - u64 ioc_syserr_enable; /* 0x0520 */ - u64 ioc_fir; /* 0x0528 */ - - u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ -}; - -extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); -extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); - - -struct cbe_mic_tm_regs { - u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ - - u64 mic_ctl_cnfg2; /* 0x0040 */ -#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL -#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL -#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL -#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL - - u64 pad_0x0048; /* 0x0048 */ - - u64 mic_aux_trc_base; /* 0x0050 */ - u64 mic_aux_trc_max_addr; /* 0x0058 */ - u64 mic_aux_trc_cur_addr; /* 0x0060 */ - u64 mic_aux_trc_grf_addr; /* 0x0068 */ - u64 mic_aux_trc_grf_data; /* 0x0070 */ - - u64 pad_0x0078; /* 0x0078 */ - - u64 mic_ctl_cnfg_0; /* 0x0080 */ -#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL - - u64 pad_0x0088; /* 0x0088 */ - - u64 slow_fast_timer_0; /* 0x0090 */ - u64 slow_next_timer_0; /* 0x0098 */ - - u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ - u64 mic_df_ecc_address_0; /* 0x00f8 */ - - u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ - u64 mic_df_ecc_address_1; /* 0x01b8 */ - - u64 mic_ctl_cnfg_1; /* 0x01c0 */ -#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL - - u64 pad_0x01c8; /* 0x01c8 */ - - u64 slow_fast_timer_1; /* 0x01d0 */ - u64 slow_next_timer_1; /* 0x01d8 */ - - u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ - u64 mic_exc; /* 0x0208 */ -#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL -#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL - - u64 mic_mnt_cfg; /* 0x0210 */ -#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL -#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL - - u64 mic_df_config; /* 0x0218 */ -#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL -#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL -#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL - - u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ - u64 mic_fir; /* 0x0230 */ -#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL -#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL -#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL -#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL -#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL -#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL -#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL -#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL -#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL -#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL -#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL - u64 mic_fir_debug; /* 0x0238 */ - - u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ -}; - -extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); -extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); - -/* some utility functions to deal with SMT */ -extern u32 cbe_get_hw_thread_id(int cpu); -extern u32 cbe_cpu_to_node(int cpu); -extern u32 cbe_node_to_cpu(int node); - -/* Init this module early */ -extern void cbe_regs_init(void); - - -#endif /* CBE_REGS_H */ diff --git a/include/asm-powerpc/checksum.h b/include/asm-powerpc/checksum.h deleted file mode 100644 index 7cdf358337cf..000000000000 --- a/include/asm-powerpc/checksum.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_CHECKSUM_H -#define _ASM_POWERPC_CHECKSUM_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. ihl is the number - * of 32-bit words and is always >= 5. - */ -extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum); - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * Computes the checksum of a memory block at src, length len, - * and adds in "sum" (32-bit), while copying the block to dst. - * If an access exception occurs on src or dst, it stores -EFAULT - * to *src_err or *dst_err respectively (if that pointer is not - * NULL), and, for an error on src, zeroes the rest of dst. - * - * Like csum_partial, this must be called with even lengths, - * except for the last fragment. - */ -extern __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, - int *src_err, int *dst_err); -/* - * the same as csum_partial, but copies from src to dst while it - * checksums. - */ -#define csum_partial_copy_from_user(src, dst, len, sum, errp) \ - csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL) - -#define csum_partial_copy_nocheck(src, dst, len, sum) \ - csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL) - - -/* - * turns a 32-bit partial checksum (e.g. from csum_partial) into a - * 1's complement 16-bit checksum. - */ -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - /* swap the two 16-bit halves of sum */ - __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); - /* if there is a carry from adding the two 16-bit halves, - it will carry from the lower half into the upper half, - giving us the correct sum in the upper half. */ - return (__force __sum16)(~((__force u32)sum + tmp) >> 16); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ -#ifdef __powerpc64__ - unsigned long s = (__force u32)sum; - - s += (__force u32)saddr; - s += (__force u32)daddr; - s += proto + len; - s += (s >> 32); - return (__force __wsum) s; -#else - __asm__("\n\ - addc %0,%0,%1 \n\ - adde %0,%0,%2 \n\ - adde %0,%0,%3 \n\ - addze %0,%0 \n\ - " - : "=r" (sum) - : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum)); - return sum; -#endif -} -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/clk_interface.h b/include/asm-powerpc/clk_interface.h deleted file mode 100644 index ab1882c1e176..000000000000 --- a/include/asm-powerpc/clk_interface.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_POWERPC_CLK_INTERFACE_H -#define __ASM_POWERPC_CLK_INTERFACE_H - -#include - -struct clk_interface { - struct clk* (*clk_get) (struct device *dev, const char *id); - int (*clk_enable) (struct clk *clk); - void (*clk_disable) (struct clk *clk); - unsigned long (*clk_get_rate) (struct clk *clk); - void (*clk_put) (struct clk *clk); - long (*clk_round_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_rate) (struct clk *clk, unsigned long rate); - int (*clk_set_parent) (struct clk *clk, struct clk *parent); - struct clk* (*clk_get_parent) (struct clk *clk); -}; - -extern struct clk_interface clk_functions; - -#endif /* __ASM_POWERPC_CLK_INTERFACE_H */ diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h deleted file mode 100644 index 107d9b915e33..000000000000 --- a/include/asm-powerpc/code-patching.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _ASM_POWERPC_CODE_PATCHING_H -#define _ASM_POWERPC_CODE_PATCHING_H - -/* - * Copyright 2008, Michael Ellerman, IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#define PPC_NOP_INSTR 0x60000000 -#define PPC_LWSYNC_INSTR 0x7c2004ac - -/* Flags for create_branch: - * "b" == create_branch(addr, target, 0); - * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); - * "bl" == create_branch(addr, target, BRANCH_SET_LINK); - * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); - */ -#define BRANCH_SET_LINK 0x1 -#define BRANCH_ABSOLUTE 0x2 - -unsigned int create_branch(const unsigned int *addr, - unsigned long target, int flags); -unsigned int create_cond_branch(const unsigned int *addr, - unsigned long target, int flags); -void patch_branch(unsigned int *addr, unsigned long target, int flags); -void patch_instruction(unsigned int *addr, unsigned int instr); - -int instr_is_relative_branch(unsigned int instr); -int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); -unsigned long branch_target(const unsigned int *instr); -unsigned int translate_branch(const unsigned int *dest, - const unsigned int *src); - -static inline unsigned long ppc_function_entry(void *func) -{ -#ifdef CONFIG_PPC64 - /* - * On PPC64 the function pointer actually points to the function's - * descriptor. The first entry in the descriptor is the address - * of the function text. - */ - return ((func_descr_t *)func)->entry; -#else - return (unsigned long)func; -#endif -} - -#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/include/asm-powerpc/compat.h b/include/asm-powerpc/compat.h deleted file mode 100644 index d811a8cd7b58..000000000000 --- a/include/asm-powerpc/compat.h +++ /dev/null @@ -1,214 +0,0 @@ -#ifndef _ASM_POWERPC_COMPAT_H -#define _ASM_POWERPC_COMPAT_H -#ifdef __KERNEL__ -/* - * Architecture specific compatibility types - */ -#include -#include - -#define COMPAT_USER_HZ 100 - -typedef u32 compat_size_t; -typedef s32 compat_ssize_t; -typedef s32 compat_time_t; -typedef s32 compat_clock_t; -typedef s32 compat_pid_t; -typedef u32 __compat_uid_t; -typedef u32 __compat_gid_t; -typedef u32 __compat_uid32_t; -typedef u32 __compat_gid32_t; -typedef u32 compat_mode_t; -typedef u32 compat_ino_t; -typedef u32 compat_dev_t; -typedef s32 compat_off_t; -typedef s64 compat_loff_t; -typedef s16 compat_nlink_t; -typedef u16 compat_ipc_pid_t; -typedef s32 compat_daddr_t; -typedef u32 compat_caddr_t; -typedef __kernel_fsid_t compat_fsid_t; -typedef s32 compat_key_t; -typedef s32 compat_timer_t; - -typedef s32 compat_int_t; -typedef s32 compat_long_t; -typedef s64 compat_s64; -typedef u32 compat_uint_t; -typedef u32 compat_ulong_t; -typedef u64 compat_u64; - -struct compat_timespec { - compat_time_t tv_sec; - s32 tv_nsec; -}; - -struct compat_timeval { - compat_time_t tv_sec; - s32 tv_usec; -}; - -struct compat_stat { - compat_dev_t st_dev; - compat_ino_t st_ino; - compat_mode_t st_mode; - compat_nlink_t st_nlink; - __compat_uid32_t st_uid; - __compat_gid32_t st_gid; - compat_dev_t st_rdev; - compat_off_t st_size; - compat_off_t st_blksize; - compat_off_t st_blocks; - compat_time_t st_atime; - u32 st_atime_nsec; - compat_time_t st_mtime; - u32 st_mtime_nsec; - compat_time_t st_ctime; - u32 st_ctime_nsec; - u32 __unused4[2]; -}; - -struct compat_flock { - short l_type; - short l_whence; - compat_off_t l_start; - compat_off_t l_len; - compat_pid_t l_pid; -}; - -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 - -struct compat_flock64 { - short l_type; - short l_whence; - compat_loff_t l_start; - compat_loff_t l_len; - compat_pid_t l_pid; -}; - -struct compat_statfs { - int f_type; - int f_bsize; - int f_blocks; - int f_bfree; - int f_bavail; - int f_files; - int f_ffree; - compat_fsid_t f_fsid; - int f_namelen; /* SunOS ignores this field. */ - int f_frsize; - int f_spare[5]; -}; - -#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff -#define COMPAT_RLIM_INFINITY 0xffffffff - -typedef u32 compat_old_sigset_t; - -#define _COMPAT_NSIG 64 -#define _COMPAT_NSIG_BPW 32 - -typedef u32 compat_sigset_word; - -#define COMPAT_OFF_T_MAX 0x7fffffff -#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL - -/* - * A pointer passed in from user mode. This should not - * be used for syscall parameters, just declare them - * as pointers because the syscall entry code will have - * appropriately converted them already. - */ -typedef u32 compat_uptr_t; - -static inline void __user *compat_ptr(compat_uptr_t uptr) -{ - return (void __user *)(unsigned long)uptr; -} - -static inline compat_uptr_t ptr_to_compat(void __user *uptr) -{ - return (u32)(unsigned long)uptr; -} - -static inline void __user *compat_alloc_user_space(long len) -{ - struct pt_regs *regs = current->thread.regs; - unsigned long usp = regs->gpr[1]; - - /* - * We cant access below the stack pointer in the 32bit ABI and - * can access 288 bytes in the 64bit ABI - */ - if (!(test_thread_flag(TIF_32BIT))) - usp -= 288; - - return (void __user *) (usp - len); -} - -/* - * ipc64_perm is actually 32/64bit clean but since the compat layer refers to - * it we may as well define it. - */ -struct compat_ipc64_perm { - compat_key_t key; - __compat_uid_t uid; - __compat_gid_t gid; - __compat_uid_t cuid; - __compat_gid_t cgid; - compat_mode_t mode; - unsigned int seq; - unsigned int __pad2; - unsigned long __unused1; /* yes they really are 64bit pads */ - unsigned long __unused2; -}; - -struct compat_semid64_ds { - struct compat_ipc64_perm sem_perm; - unsigned int __unused1; - compat_time_t sem_otime; - unsigned int __unused2; - compat_time_t sem_ctime; - compat_ulong_t sem_nsems; - compat_ulong_t __unused3; - compat_ulong_t __unused4; -}; - -struct compat_msqid64_ds { - struct compat_ipc64_perm msg_perm; - unsigned int __unused1; - compat_time_t msg_stime; - unsigned int __unused2; - compat_time_t msg_rtime; - unsigned int __unused3; - compat_time_t msg_ctime; - compat_ulong_t msg_cbytes; - compat_ulong_t msg_qnum; - compat_ulong_t msg_qbytes; - compat_pid_t msg_lspid; - compat_pid_t msg_lrpid; - compat_ulong_t __unused4; - compat_ulong_t __unused5; -}; - -struct compat_shmid64_ds { - struct compat_ipc64_perm shm_perm; - unsigned int __unused1; - compat_time_t shm_atime; - unsigned int __unused2; - compat_time_t shm_dtime; - unsigned int __unused3; - compat_time_t shm_ctime; - unsigned int __unused4; - compat_size_t shm_segsz; - compat_pid_t shm_cpid; - compat_pid_t shm_lpid; - compat_ulong_t shm_nattch; - compat_ulong_t __unused5; - compat_ulong_t __unused6; -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h deleted file mode 100644 index 24d79e3abd8e..000000000000 --- a/include/asm-powerpc/cpm.h +++ /dev/null @@ -1,106 +0,0 @@ -#ifndef __CPM_H -#define __CPM_H - -#include -#include -#include - -/* Opcodes common to CPM1 and CPM2 -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_SET_TIMER ((ushort)0x0008) -#define CPM_CR_STOP_IDMA ((ushort)0x000b) - -/* Buffer descriptors used by many of the CPM protocols. */ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; - -/* Buffer descriptor control/status used by serial - */ - -#define BD_SC_EMPTY (0x8000) /* Receive is empty */ -#define BD_SC_READY (0x8000) /* Transmit is ready */ -#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */ -#define BD_SC_INTRPT (0x1000) /* Interrupt on change */ -#define BD_SC_LAST (0x0800) /* Last buffer in frame */ -#define BD_SC_TC (0x0400) /* Transmit CRC */ -#define BD_SC_CM (0x0200) /* Continous mode */ -#define BD_SC_ID (0x0100) /* Rec'd too many idles */ -#define BD_SC_P (0x0100) /* xmt preamble */ -#define BD_SC_BR (0x0020) /* Break received */ -#define BD_SC_FR (0x0010) /* Framing error */ -#define BD_SC_PR (0x0008) /* Parity error */ -#define BD_SC_NAK (0x0004) /* NAK - did not respond */ -#define BD_SC_OV (0x0002) /* Overrun */ -#define BD_SC_UN (0x0002) /* Underrun */ -#define BD_SC_CD (0x0001) /* */ -#define BD_SC_CL (0x0001) /* Collision */ - -/* Buffer descriptor control/status used by Ethernet receive. - * Common to SCC and FCC. - */ -#define BD_ENET_RX_EMPTY (0x8000) -#define BD_ENET_RX_WRAP (0x2000) -#define BD_ENET_RX_INTR (0x1000) -#define BD_ENET_RX_LAST (0x0800) -#define BD_ENET_RX_FIRST (0x0400) -#define BD_ENET_RX_MISS (0x0100) -#define BD_ENET_RX_BC (0x0080) /* FCC Only */ -#define BD_ENET_RX_MC (0x0040) /* FCC Only */ -#define BD_ENET_RX_LG (0x0020) -#define BD_ENET_RX_NO (0x0010) -#define BD_ENET_RX_SH (0x0008) -#define BD_ENET_RX_CR (0x0004) -#define BD_ENET_RX_OV (0x0002) -#define BD_ENET_RX_CL (0x0001) -#define BD_ENET_RX_STATS (0x01ff) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. - * Common to SCC and FCC. - */ -#define BD_ENET_TX_READY (0x8000) -#define BD_ENET_TX_PAD (0x4000) -#define BD_ENET_TX_WRAP (0x2000) -#define BD_ENET_TX_INTR (0x1000) -#define BD_ENET_TX_LAST (0x0800) -#define BD_ENET_TX_TC (0x0400) -#define BD_ENET_TX_DEF (0x0200) -#define BD_ENET_TX_HB (0x0100) -#define BD_ENET_TX_LC (0x0080) -#define BD_ENET_TX_RL (0x0040) -#define BD_ENET_TX_RCMASK (0x003c) -#define BD_ENET_TX_UN (0x0002) -#define BD_ENET_TX_CSL (0x0001) -#define BD_ENET_TX_STATS (0x03ff) /* All status bits */ - -/* Buffer descriptor control/status used by Transparent mode SCC. - */ -#define BD_SCC_TX_LAST (0x0800) - -/* Buffer descriptor control/status used by I2C. - */ -#define BD_I2C_START (0x0400) - -int cpm_muram_init(void); -unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); -int cpm_muram_free(unsigned long offset); -unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); -void __iomem *cpm_muram_addr(unsigned long offset); -unsigned long cpm_muram_offset(void __iomem *addr); -dma_addr_t cpm_muram_dma(void __iomem *addr); -int cpm_command(u32 command, u8 opcode); - -int cpm2_gpiochip_add32(struct device_node *np); - -#endif diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h deleted file mode 100644 index 2ff798744c1d..000000000000 --- a/include/asm-powerpc/cpm1.h +++ /dev/null @@ -1,652 +0,0 @@ -/* - * MPC8xx Communication Processor Module. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * throught the MPC8xx internal memory map. See immap.h for details. - * This file only contains what I need for the moment, not the total - * CPM capabilities. I (or someone else) will add definitions as they - * are needed. -- Dan - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM1__ -#define __CPM1__ - -#include -#include -#include - -/* CPM Command register. -*/ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* Channel numbers. -*/ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ -#define CPM_CR_CH_TIMER CPM_CR_CH_SPI -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ - -#define cpm_dpalloc cpm_muram_alloc -#define cpm_dpfree cpm_muram_free -#define cpm_dpram_addr cpm_muram_addr -#define cpm_dpram_phys cpm_muram_dma - -extern void cpm_setbrg(uint brg, uint rate); - -extern void cpm_load_patch(cpm8xx_t *cp); - -extern void cpm_reset(void); - -/* Parameter RAM offsets. -*/ -#define PROFF_SCC1 ((uint)0x0000) -#define PROFF_IIC ((uint)0x0080) -#define PROFF_SCC2 ((uint)0x0100) -#define PROFF_SPI ((uint)0x0180) -#define PROFF_SCC3 ((uint)0x0200) -#define PROFF_SMC1 ((uint)0x0280) -#define PROFF_SCC4 ((uint)0x0300) -#define PROFF_SMC2 ((uint)0x0380) - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - char res1[8]; /* Reserved */ - ushort smc_rpbase; /* Relocation pointer */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SI Clock Route Register -*/ -#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) -#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) -#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) -#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) -#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) -#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* Function code bits. -*/ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* CPM Ethernet through SCCx. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - char res1[8]; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ - char res1[4]; /* Reserved */ - ushort iic_rpbase; /* Relocation pointer */ - char res2[2]; /* Reserved */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; - ushort spi_rpbase; /* Relocation pointer */ - ushort spi_res2; -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ -#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ -#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -/* SPIE fields */ -#define SPIE_MME 0x20 -#define SPIE_TXE 0x10 -#define SPIE_BSY 0x04 -#define SPIE_TXB 0x02 -#define SPIE_RXB 0x01 - -/* - * RISC Controller Configuration Register definitons - */ -#define RCCR_TIME 0x8000 /* RISC Timer Enable */ -#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ -#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ - -/* RISC Timer Parameter RAM offset */ -#define PROFF_RTMR ((uint)0x01B0) - -typedef struct risc_timer_pram { - unsigned short tm_base; /* RISC Timer Table Base Address */ - unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ - unsigned short r_tmr; /* RISC Timer Mode Register */ - unsigned short r_tmv; /* RISC Timer Valid Register */ - unsigned long tm_cmd; /* RISC Timer Command Register */ - unsigned long tm_cnt; /* RISC Timer Internal Count */ -} rt_pram_t; - -/* Bits in RISC Timer Command Register */ -#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ -#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ -#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ -#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ -#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC15 ((ushort)0x1f) -#define CPMVEC_SCC1 ((ushort)0x1e) -#define CPMVEC_SCC2 ((ushort)0x1d) -#define CPMVEC_SCC3 ((ushort)0x1c) -#define CPMVEC_SCC4 ((ushort)0x1b) -#define CPMVEC_PIO_PC14 ((ushort)0x1a) -#define CPMVEC_TIMER1 ((ushort)0x19) -#define CPMVEC_PIO_PC13 ((ushort)0x18) -#define CPMVEC_PIO_PC12 ((ushort)0x17) -#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) -#define CPMVEC_IDMA1 ((ushort)0x15) -#define CPMVEC_IDMA2 ((ushort)0x14) -#define CPMVEC_TIMER2 ((ushort)0x12) -#define CPMVEC_RISCTIMER ((ushort)0x11) -#define CPMVEC_I2C ((ushort)0x10) -#define CPMVEC_PIO_PC11 ((ushort)0x0f) -#define CPMVEC_PIO_PC10 ((ushort)0x0e) -#define CPMVEC_TIMER3 ((ushort)0x0c) -#define CPMVEC_PIO_PC9 ((ushort)0x0b) -#define CPMVEC_PIO_PC8 ((ushort)0x0a) -#define CPMVEC_PIO_PC7 ((ushort)0x09) -#define CPMVEC_TIMER4 ((ushort)0x07) -#define CPMVEC_PIO_PC6 ((ushort)0x06) -#define CPMVEC_SPI ((ushort)0x05) -#define CPMVEC_SMC1 ((ushort)0x04) -#define CPMVEC_SMC2 ((ushort)0x03) -#define CPMVEC_PIO_PC5 ((ushort)0x02) -#define CPMVEC_PIO_PC4 ((ushort)0x01) -#define CPMVEC_ERROR ((ushort)0x00) - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - -#define IMAP_ADDR (get_immrbase()) - -#define CPM_PIN_INPUT 0 -#define CPM_PIN_OUTPUT 1 -#define CPM_PIN_PRIMARY 0 -#define CPM_PIN_SECONDARY 2 -#define CPM_PIN_GPIO 4 -#define CPM_PIN_OPENDRAIN 8 - -enum cpm_port { - CPM_PORTA, - CPM_PORTB, - CPM_PORTC, - CPM_PORTD, - CPM_PORTE, -}; - -void cpm1_set_pin(enum cpm_port port, int pin, int flags); - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_SMC1, - CPM_CLK_SMC2, -}; - -enum cpm_clk { - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ -}; - -int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); - -#endif /* __CPM1__ */ diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h deleted file mode 100644 index 2a6fa0183ac9..000000000000 --- a/include/asm-powerpc/cpm2.h +++ /dev/null @@ -1,1195 +0,0 @@ -/* - * Communication Processor Module v2. - * - * This file contains structures and information for the communication - * processor channels found in the dual port RAM or parameter RAM. - * All CPM control and status is available through the CPM2 internal - * memory map. See immap_cpm2.h for details. - */ -#ifdef __KERNEL__ -#ifndef __CPM2__ -#define __CPM2__ - -#include -#include -#include - -#ifdef CONFIG_PPC_85xx -#define CPM_MAP_ADDR (get_immrbase() + 0x80000) -#endif - -/* CPM Command register. -*/ -#define CPM_CR_RST ((uint)0x80000000) -#define CPM_CR_PAGE ((uint)0x7c000000) -#define CPM_CR_SBLOCK ((uint)0x03e00000) -#define CPM_CR_FLG ((uint)0x00010000) -#define CPM_CR_MCN ((uint)0x00003fc0) -#define CPM_CR_OPCODE ((uint)0x0000000f) - -/* Device sub-block and page codes. -*/ -#define CPM_CR_SCC1_SBLOCK (0x04) -#define CPM_CR_SCC2_SBLOCK (0x05) -#define CPM_CR_SCC3_SBLOCK (0x06) -#define CPM_CR_SCC4_SBLOCK (0x07) -#define CPM_CR_SMC1_SBLOCK (0x08) -#define CPM_CR_SMC2_SBLOCK (0x09) -#define CPM_CR_SPI_SBLOCK (0x0a) -#define CPM_CR_I2C_SBLOCK (0x0b) -#define CPM_CR_TIMER_SBLOCK (0x0f) -#define CPM_CR_RAND_SBLOCK (0x0e) -#define CPM_CR_FCC1_SBLOCK (0x10) -#define CPM_CR_FCC2_SBLOCK (0x11) -#define CPM_CR_FCC3_SBLOCK (0x12) -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_MCC1_SBLOCK (0x1c) - -#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) - -#define CPM_CR_SCC1_PAGE (0x00) -#define CPM_CR_SCC2_PAGE (0x01) -#define CPM_CR_SCC3_PAGE (0x02) -#define CPM_CR_SCC4_PAGE (0x03) -#define CPM_CR_SMC1_PAGE (0x07) -#define CPM_CR_SMC2_PAGE (0x08) -#define CPM_CR_SPI_PAGE (0x09) -#define CPM_CR_I2C_PAGE (0x0a) -#define CPM_CR_TIMER_PAGE (0x0a) -#define CPM_CR_RAND_PAGE (0x0a) -#define CPM_CR_FCC1_PAGE (0x04) -#define CPM_CR_FCC2_PAGE (0x05) -#define CPM_CR_FCC3_PAGE (0x06) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define CPM_CR_MCC1_PAGE (0x07) -#define CPM_CR_MCC2_PAGE (0x08) - -#define CPM_CR_FCC_PAGE(x) (x + 0x04) - -/* CPM2-specific opcodes (see cpm.h for common opcodes) -*/ -#define CPM_CR_START_IDMA ((ushort)0x0009) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - -/* The number of pages of host memory we allocate for CPM. This is - * done early in kernel initialization to get physically contiguous - * pages. - */ -#define NUM_CPM_HOST_PAGES 2 - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ - -#define cpm_dpalloc cpm_muram_alloc -#define cpm_dpfree cpm_muram_free -#define cpm_dpram_addr cpm_muram_addr - -extern void cpm2_reset(void); - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -#define CPM2_BRG_INT_CLK (get_brgfreq()) -#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) - -extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -static inline void cpm_setbrg(uint brg, uint rate) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -static inline void cpm2_fastbrg(uint brg, uint rate, int div16) -{ - __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); -} - -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - -/* Parameter RAM offsets from the base. -*/ -#define PROFF_SCC1 ((uint)0x8000) -#define PROFF_SCC2 ((uint)0x8100) -#define PROFF_SCC3 ((uint)0x8200) -#define PROFF_SCC4 ((uint)0x8300) -#define PROFF_FCC1 ((uint)0x8400) -#define PROFF_FCC2 ((uint)0x8500) -#define PROFF_FCC3 ((uint)0x8600) -#define PROFF_MCC1 ((uint)0x8700) -#define PROFF_SMC1_BASE ((uint)0x87fc) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_MCC2 ((uint)0x8800) -#define PROFF_SMC2_BASE ((uint)0x88fc) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_SPI_BASE ((uint)0x89fc) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_TIMERS ((uint)0x8ae0) -#define PROFF_REVNUM ((uint)0x8af0) -#define PROFF_RAND ((uint)0x8af8) -#define PROFF_I2C_BASE ((uint)0x8afc) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -#define PROFF_SCC_SIZE ((uint)0x100) -#define PROFF_FCC_SIZE ((uint)0x100) -#define PROFF_SMC_SIZE ((uint)64) - -/* The SMCs are relocated to any of the first eight DPRAM pages. - * We will fix these at the first locations of DPRAM, until we - * get some microcode patches :-). - * The parameter ram space for the SMCs is fifty-some bytes, and - * they are required to start on a 64 byte boundary. - */ -#define PROFF_SMC1 (0) -#define PROFF_SMC2 (64) - - -/* Define enough so I can at least use the serial port as a UART. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - uint smc_stmp; /* SDMA Temp */ -} smc_uart_t; - -/* SMC uart mode register (Internal memory map). -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PSMR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PSMR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -/* How about some FCCs..... -*/ -#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) -#define FCC_GFMR_DIAG_LE ((uint)0x40000000) -#define FCC_GFMR_DIAG_AE ((uint)0x80000000) -#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) -#define FCC_GFMR_TCI ((uint)0x20000000) -#define FCC_GFMR_TRX ((uint)0x10000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_CDP ((uint)0x04000000) -#define FCC_GFMR_CTSP ((uint)0x02000000) -#define FCC_GFMR_CDS ((uint)0x01000000) -#define FCC_GFMR_CTSS ((uint)0x00800000) -#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) -#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) -#define FCC_GFMR_SYNL_8 ((uint)0x00008000) -#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) -#define FCC_GFMR_RTSM ((uint)0x00002000) -#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) -#define FCC_GFMR_REVD ((uint)0x00000400) -#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) -#define FCC_GFMR_TCRC_16 ((uint)0x00000000) -#define FCC_GFMR_TCRC_32 ((uint)0x00000080) -#define FCC_GFMR_ENR ((uint)0x00000020) -#define FCC_GFMR_ENT ((uint)0x00000010) -#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) -#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) -#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) - -/* Generic FCC parameter ram. -*/ -typedef struct fcc_param { - ushort fcc_riptr; /* Rx Internal temp pointer */ - ushort fcc_tiptr; /* Tx Internal temp pointer */ - ushort fcc_res1; - ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ - uint fcc_rstate; /* Upper byte is Func code, must be set */ - uint fcc_rbase; /* Receive BD base */ - ushort fcc_rbdstat; /* RxBD status */ - ushort fcc_rbdlen; /* RxBD down counter */ - uint fcc_rdptr; /* RxBD internal data pointer */ - uint fcc_tstate; /* Upper byte is Func code, must be set */ - uint fcc_tbase; /* Transmit BD base */ - ushort fcc_tbdstat; /* TxBD status */ - ushort fcc_tbdlen; /* TxBD down counter */ - uint fcc_tdptr; /* TxBD internal data pointer */ - uint fcc_rbptr; /* Rx BD Internal buf pointer */ - uint fcc_tbptr; /* Tx BD Internal buf pointer */ - uint fcc_rcrc; /* Rx temp CRC */ - uint fcc_res2; - uint fcc_tcrc; /* Tx temp CRC */ -} fccp_t; - - -/* Ethernet controller through FCC. -*/ -typedef struct fcc_enet { - fccp_t fen_genfcc; - uint fen_statbuf; /* Internal status buffer */ - uint fen_camptr; /* CAM address */ - uint fen_cmask; /* Constant mask for CRC */ - uint fen_cpres; /* Preset CRC */ - uint fen_crcec; /* CRC Error counter */ - uint fen_alec; /* alignment error counter */ - uint fen_disfc; /* discard frame counter */ - ushort fen_retlim; /* Retry limit */ - ushort fen_retcnt; /* Retry counter */ - ushort fen_pper; /* Persistence */ - ushort fen_boffcnt; /* backoff counter */ - uint fen_gaddrh; /* Group address filter, high 32-bits */ - uint fen_gaddrl; /* Group address filter, low 32-bits */ - ushort fen_tfcstat; /* out of sequence TxBD */ - ushort fen_tfclen; - uint fen_tfcptr; - ushort fen_mflr; /* Maximum frame length (1518) */ - ushort fen_paddrh; /* MAC address */ - ushort fen_paddrm; - ushort fen_paddrl; - ushort fen_ibdcount; /* Internal BD counter */ - ushort fen_ibdstart; /* Internal BD start pointer */ - ushort fen_ibdend; /* Internal BD end pointer */ - ushort fen_txlen; /* Internal Tx frame length counter */ - uint fen_ibdbase[8]; /* Internal use */ - uint fen_iaddrh; /* Individual address filter */ - uint fen_iaddrl; - ushort fen_minflr; /* Minimum frame length (64) */ - ushort fen_taddrh; /* Filter transfer MAC address */ - ushort fen_taddrm; - ushort fen_taddrl; - ushort fen_padptr; /* Pointer to pad byte buffer */ - ushort fen_cftype; /* control frame type */ - ushort fen_cfrange; /* control frame range */ - ushort fen_maxb; /* maximum BD count */ - ushort fen_maxd1; /* Max DMA1 length (1520) */ - ushort fen_maxd2; /* Max DMA2 length (1520) */ - ushort fen_maxd; /* internal max DMA count */ - ushort fen_dmacnt; /* internal DMA counter */ - uint fen_octc; /* Total octect counter */ - uint fen_colc; /* Total collision counter */ - uint fen_broc; /* Total broadcast packet counter */ - uint fen_mulc; /* Total multicast packet count */ - uint fen_uspc; /* Total packets < 64 bytes */ - uint fen_frgc; /* Total packets < 64 bytes with errors */ - uint fen_ospc; /* Total packets > 1518 */ - uint fen_jbrc; /* Total packets > 1518 with errors */ - uint fen_p64c; /* Total packets == 64 bytes */ - uint fen_p65c; /* Total packets 64 < bytes <= 127 */ - uint fen_p128c; /* Total packets 127 < bytes <= 255 */ - uint fen_p256c; /* Total packets 256 < bytes <= 511 */ - uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ - uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ - uint fen_cambuf; /* Internal CAM buffer poiner */ - ushort fen_rfthr; /* Received frames threshold */ - ushort fen_rfcnt; /* Received frames count */ -} fcc_enet_t; - -/* FCC Event/Mask register as used by Ethernet. -*/ -#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ -#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ -#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ -#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* FCC Mode Register (FPSMR) as used by Ethernet. -*/ -#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ -#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ -#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ -#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ -#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ -#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ -#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ -#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ -#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ -#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ -#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ -#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ -#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - -/* IDMA parameter RAM -*/ -typedef struct idma { - ushort ibase; /* IDMA buffer descriptor table base address */ - ushort dcm; /* DMA channel mode */ - ushort ibdptr; /* IDMA current buffer descriptor pointer */ - ushort dpr_buf; /* IDMA transfer buffer base address */ - ushort buf_inv; /* internal buffer inventory */ - ushort ss_max; /* steady-state maximum transfer size */ - ushort dpr_in_ptr; /* write pointer inside the internal buffer */ - ushort sts; /* source transfer size */ - ushort dpr_out_ptr; /* read pointer inside the internal buffer */ - ushort seob; /* source end of burst */ - ushort deob; /* destination end of burst */ - ushort dts; /* destination transfer size */ - ushort ret_add; /* return address when working in ERM=1 mode */ - ushort res0; /* reserved */ - uint bd_cnt; /* internal byte count */ - uint s_ptr; /* source internal data pointer */ - uint d_ptr; /* destination internal data pointer */ - uint istate; /* internal state */ - u_char res1[20]; /* pad to 64-byte length */ -} idma_t; - -/* DMA channel mode bit fields -*/ -#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ -#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ -#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ -#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ -#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ -#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ -#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ -#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ -#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ -#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ -#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ -#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ -#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ - -/* IDMA Buffer Descriptors -*/ -typedef struct idma_bd { - uint flags; - uint len; /* data length */ - uint src; /* source data buffer pointer */ - uint dst; /* destination data buffer pointer */ -} idma_bd_t; - -/* IDMA buffer descriptor flag bit fields -*/ -#define IDMA_BD_V ((uint)0x80000000) /* valid */ -#define IDMA_BD_W ((uint)0x20000000) /* wrap */ -#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ -#define IDMA_BD_L ((uint)0x08000000) /* last */ -#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ -#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ -#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ -#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ -#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ -#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ -#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ -#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ -#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ -#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ -#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ - -/* per-channel IDMA registers -*/ -typedef struct im_idma { - u_char idsr; /* IDMAn event status register */ - u_char res0[3]; - u_char idmr; /* IDMAn event mask register */ - u_char res1[3]; -} im_idma_t; - -/* IDMA event register bit fields -*/ -#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ -#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ -#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ -#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ - -/* RISC Controller Configuration Register (RCCR) bit fields -*/ -#define RCCR_TIME ((uint)0x80000000) /* timer enable */ -#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ -#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ -#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ -#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ -#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ -#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ -#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ -#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ -#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ -#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ -#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ -#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ -#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ -#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ -#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ -#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ -#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ -#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ -#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ -#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ -#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ -#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ -#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ -#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ -#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ -#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ -#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ -#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ -#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ -#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ -#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ -#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ -#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ -#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ -#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ -#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ -#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ - -/*----------------------------------------------------------------------- - * CMXFCR - CMX FCC Clock Route Register - */ -#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ -#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ -#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ -#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ -#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ -#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ -#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ -#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ -#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ - -#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ -#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ -#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ -#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ -#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ -#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ -#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ -#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ - -#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ -#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ -#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ -#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ -#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ -#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ -#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ -#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ - -#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ -#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ -#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ -#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ -#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ -#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ -#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ -#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ - -#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ -#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ -#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ -#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ -#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ -#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ -#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ -#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ - -#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ -#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ -#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ -#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ -#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ -#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ -#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ -#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ - -#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ -#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ -#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ -#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ -#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ -#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ -#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ -#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ - -/*----------------------------------------------------------------------- - * CMXSCR - CMX SCC Clock Route Register - */ -#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ -#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ -#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ -#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ -#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ -#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ -#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ -#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ -#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ -#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ -#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ -#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ -#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ -#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ -#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ -#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ - -#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ -#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ -#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ -#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ -#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ -#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ -#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ -#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ -#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ -#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ -#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ -#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ -#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ -#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ -#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ -#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ -#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ -#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ -#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ -#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ -#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ -#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ -#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ -#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ -#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ -#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ -#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ -#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ -#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ -#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ -#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ -#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ -#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ -#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ -#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ -#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ -#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ -#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ -#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ -#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ -#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ -#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ -#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ - -#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ -#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ -#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ -#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ -#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ -#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ -#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ -#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ -#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ -#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ -#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ -#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ -#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ -#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ -#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register 4-31 - */ -#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ -#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ -#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ -#define SIUMCR_CDIS 0x10000000 /* Core Disable */ -#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ -#define SIUMCR_DPPC01 0x04000000 /* - " - */ -#define SIUMCR_DPPC10 0x08000000 /* - " - */ -#define SIUMCR_DPPC11 0x0c000000 /* - " - */ -#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define SIUMCR_L2CPC01 0x01000000 /* - " - */ -#define SIUMCR_L2CPC10 0x02000000 /* - " - */ -#define SIUMCR_L2CPC11 0x03000000 /* - " - */ -#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ -#define SIUMCR_LBPC01 0x00400000 /* - " - */ -#define SIUMCR_LBPC10 0x00800000 /* - " - */ -#define SIUMCR_LBPC11 0x00c00000 /* - " - */ -#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ -#define SIUMCR_APPC01 0x00100000 /* - " - */ -#define SIUMCR_APPC10 0x00200000 /* - " - */ -#define SIUMCR_APPC11 0x00300000 /* - " - */ -#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define SIUMCR_CS10PC01 0x00040000 /* - " - */ -#define SIUMCR_CS10PC10 0x00080000 /* - " - */ -#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ -#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ -#define SIUMCR_BCTLC01 0x00010000 /* - " - */ -#define SIUMCR_BCTLC10 0x00020000 /* - " - */ -#define SIUMCR_BCTLC11 0x00030000 /* - " - */ -#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ -#define SIUMCR_MMR01 0x00004000 /* - " - */ -#define SIUMCR_MMR10 0x00008000 /* - " - */ -#define SIUMCR_MMR11 0x0000c000 /* - " - */ -#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control Register 9-8 -*/ -#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ -#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ -#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ -#define SCCR_PCIDF_SHIFT 3 - -#ifndef CPM_IMMR_OFFSET -#define CPM_IMMR_OFFSET 0x101a8 -#endif - -#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ - -/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK - * in order to use clock-computing stuff below for the FCC x - */ - -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) -#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) - -#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PC3_TXDAT 0x00000010U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) -#define PC3_DIRC1 (PC3_TXDAT) - -/* Handy macro to specify mem for FCCs*/ -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) - -/* Clocks and GRG's */ - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_FCC1, - CPM_CLK_FCC2, - CPM_CLK_FCC3, - CPM_CLK_SMC1, - CPM_CLK_SMC2, -}; - -enum cpm_clk { - CPM_CLK_NONE = 0, - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_BRG5, /* Baud Rate Generator 5 */ - CPM_BRG6, /* Baud Rate Generator 6 */ - CPM_BRG7, /* Baud Rate Generator 7 */ - CPM_BRG8, /* Baud Rate Generator 8 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ - CPM_CLK9, /* Clock 9 */ - CPM_CLK10, /* Clock 10 */ - CPM_CLK11, /* Clock 11 */ - CPM_CLK12, /* Clock 12 */ - CPM_CLK13, /* Clock 13 */ - CPM_CLK14, /* Clock 14 */ - CPM_CLK15, /* Clock 15 */ - CPM_CLK16, /* Clock 16 */ - CPM_CLK17, /* Clock 17 */ - CPM_CLK18, /* Clock 18 */ - CPM_CLK19, /* Clock 19 */ - CPM_CLK20, /* Clock 20 */ - CPM_CLK_DUMMY -}; - -extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); -extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); - -#define CPM_PIN_INPUT 0 -#define CPM_PIN_OUTPUT 1 -#define CPM_PIN_PRIMARY 0 -#define CPM_PIN_SECONDARY 2 -#define CPM_PIN_GPIO 4 -#define CPM_PIN_OPENDRAIN 8 - -void cpm2_set_pin(int port, int pin, int flags); - -#endif /* __CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h deleted file mode 100644 index ef8a248dfd55..000000000000 --- a/include/asm-powerpc/cputable.h +++ /dev/null @@ -1,514 +0,0 @@ -#ifndef __ASM_POWERPC_CPUTABLE_H -#define __ASM_POWERPC_CPUTABLE_H - -#define PPC_FEATURE_32 0x80000000 -#define PPC_FEATURE_64 0x40000000 -#define PPC_FEATURE_601_INSTR 0x20000000 -#define PPC_FEATURE_HAS_ALTIVEC 0x10000000 -#define PPC_FEATURE_HAS_FPU 0x08000000 -#define PPC_FEATURE_HAS_MMU 0x04000000 -#define PPC_FEATURE_HAS_4xxMAC 0x02000000 -#define PPC_FEATURE_UNIFIED_CACHE 0x01000000 -#define PPC_FEATURE_HAS_SPE 0x00800000 -#define PPC_FEATURE_HAS_EFP_SINGLE 0x00400000 -#define PPC_FEATURE_HAS_EFP_DOUBLE 0x00200000 -#define PPC_FEATURE_NO_TB 0x00100000 -#define PPC_FEATURE_POWER4 0x00080000 -#define PPC_FEATURE_POWER5 0x00040000 -#define PPC_FEATURE_POWER5_PLUS 0x00020000 -#define PPC_FEATURE_CELL 0x00010000 -#define PPC_FEATURE_BOOKE 0x00008000 -#define PPC_FEATURE_SMT 0x00004000 -#define PPC_FEATURE_ICACHE_SNOOP 0x00002000 -#define PPC_FEATURE_ARCH_2_05 0x00001000 -#define PPC_FEATURE_PA6T 0x00000800 -#define PPC_FEATURE_HAS_DFP 0x00000400 -#define PPC_FEATURE_POWER6_EXT 0x00000200 -#define PPC_FEATURE_ARCH_2_06 0x00000100 -#define PPC_FEATURE_HAS_VSX 0x00000080 - -#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ - 0x00000040 - -#define PPC_FEATURE_TRUE_LE 0x00000002 -#define PPC_FEATURE_PPC_LE 0x00000001 - -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ - -/* This structure can grow, it's real size is used by head.S code - * via the mkdefs mechanism. - */ -struct cpu_spec; - -typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); -typedef void (*cpu_restore_t)(void); - -enum powerpc_oprofile_type { - PPC_OPROFILE_INVALID = 0, - PPC_OPROFILE_RS64 = 1, - PPC_OPROFILE_POWER4 = 2, - PPC_OPROFILE_G4 = 3, - PPC_OPROFILE_FSL_EMB = 4, - PPC_OPROFILE_CELL = 5, - PPC_OPROFILE_PA6T = 6, -}; - -enum powerpc_pmc_type { - PPC_PMC_DEFAULT = 0, - PPC_PMC_IBM = 1, - PPC_PMC_PA6T = 2, -}; - -struct pt_regs; - -extern int machine_check_generic(struct pt_regs *regs); -extern int machine_check_4xx(struct pt_regs *regs); -extern int machine_check_440A(struct pt_regs *regs); -extern int machine_check_e500(struct pt_regs *regs); -extern int machine_check_e200(struct pt_regs *regs); - -/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ -struct cpu_spec { - /* CPU is matched via (PVR & pvr_mask) == pvr_value */ - unsigned int pvr_mask; - unsigned int pvr_value; - - char *cpu_name; - unsigned long cpu_features; /* Kernel features */ - unsigned int cpu_user_features; /* Userland features */ - - /* cache line sizes */ - unsigned int icache_bsize; - unsigned int dcache_bsize; - - /* number of performance monitor counters */ - unsigned int num_pmcs; - enum powerpc_pmc_type pmc_type; - - /* this is called to initialize various CPU bits like L1 cache, - * BHT, SPD, etc... from head.S before branching to identify_machine - */ - cpu_setup_t cpu_setup; - /* Used to restore cpu setup on secondary processors and at resume */ - cpu_restore_t cpu_restore; - - /* Used by oprofile userspace to select the right counters */ - char *oprofile_cpu_type; - - /* Processor specific oprofile operations */ - enum powerpc_oprofile_type oprofile_type; - - /* Bit locations inside the mmcra change */ - unsigned long oprofile_mmcra_sihv; - unsigned long oprofile_mmcra_sipr; - - /* Bits to clear during an oprofile exception */ - unsigned long oprofile_mmcra_clear; - - /* Name of processor class, for the ELF AT_PLATFORM entry */ - char *platform; - - /* Processor specific machine check handling. Return negative - * if the error is fatal, 1 if it was fully recovered and 0 to - * pass up (not CPU originated) */ - int (*machine_check)(struct pt_regs *regs); -}; - -extern struct cpu_spec *cur_cpu_spec; - -extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; - -extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); -extern void do_feature_fixups(unsigned long value, void *fixup_start, - void *fixup_end); - -extern const char *powerpc_base_platform; - -#endif /* __ASSEMBLY__ */ - -/* CPU kernel features */ - -/* Retain the 32b definitions all use bottom half of word */ -#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x0000000000000001) -#define CPU_FTR_L2CR ASM_CONST(0x0000000000000002) -#define CPU_FTR_SPEC7450 ASM_CONST(0x0000000000000004) -#define CPU_FTR_ALTIVEC ASM_CONST(0x0000000000000008) -#define CPU_FTR_TAU ASM_CONST(0x0000000000000010) -#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) -#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) -#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) -#define CPU_FTR_601 ASM_CONST(0x0000000000000100) -#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200) -#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) -#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800) -#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000) -#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000) -#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000) -#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000) -#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000) -#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) -#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) -#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) -#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) -#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) -#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) -#define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) -#define CPU_FTR_SPE ASM_CONST(0x0000000002000000) -#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) -#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) - -/* - * Add the 64-bit processor unique features in the top half of the word; - * on 32-bit, make the names available but defined to be 0. - */ -#ifdef __powerpc64__ -#define LONG_ASM_CONST(x) ASM_CONST(x) -#else -#define LONG_ASM_CONST(x) 0 -#endif - -#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000) -#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000) -#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000) -#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000) -#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000) -#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000) -#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000) -#define CPU_FTR_SMT LONG_ASM_CONST(0x0000010000000000) -#define CPU_FTR_LOCKLESS_TLBIE LONG_ASM_CONST(0x0000040000000000) -#define CPU_FTR_CI_LARGE_PAGE LONG_ASM_CONST(0x0000100000000000) -#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000200000000000) -#define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) -#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) -#define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) -#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) -#define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) -#define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) -#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) -#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) - -#ifndef __ASSEMBLY__ - -#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_SLB | \ - CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE) - -/* We only set the altivec features if the kernel was compiled with altivec - * support - */ -#ifdef CONFIG_ALTIVEC -#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC -#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC -#else -#define CPU_FTR_ALTIVEC_COMP 0 -#define PPC_FEATURE_HAS_ALTIVEC_COMP 0 -#endif - -/* We only set the VSX features if the kernel was compiled with VSX - * support - */ -#ifdef CONFIG_VSX -#define CPU_FTR_VSX_COMP CPU_FTR_VSX -#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX -#else -#define CPU_FTR_VSX_COMP 0 -#define PPC_FEATURE_HAS_VSX_COMP 0 -#endif - -/* We only set the spe features if the kernel was compiled with spe - * support - */ -#ifdef CONFIG_SPE -#define CPU_FTR_SPE_COMP CPU_FTR_SPE -#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE -#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE -#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE -#else -#define CPU_FTR_SPE_COMP 0 -#define PPC_FEATURE_HAS_SPE_COMP 0 -#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 -#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 -#endif - -/* We need to mark all pages as being coherent if we're SMP or we have a - * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II - * require it for PCI "streaming/prefetch" to work properly. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ - || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) -#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT -#else -#define CPU_FTR_COMMON 0 -#endif - -/* The powersave features NAP & DOZE seems to confuse BDI when - debugging. So if a BDI is used, disable theses - */ -#ifndef CONFIG_BDI_SWITCH -#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE -#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP -#else -#define CPU_FTR_MAYBE_CAN_DOZE 0 -#define CPU_FTR_MAYBE_CAN_NAP 0 -#endif - -#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \ - !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \ - !defined(CONFIG_BOOKE)) - -#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_603 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_604 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE) -#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_740 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ - CPU_FTR_PPC_LE) -#define CPU_FTRS_750 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \ - CPU_FTR_PPC_LE) -#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM) -#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM) -#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \ - CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_750GX (CPU_FTRS_750FX) -#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_7400 (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ - CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) -#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE) -#define CPU_FTRS_7455 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \ - CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7447A (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_7448 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ - CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) -#define CPU_FTRS_82XX (CPU_FTR_COMMON | \ - CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) -#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS) -#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_COMMON) -#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \ - CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ - CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) -#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) -#define CPU_FTRS_8XX (CPU_FTR_USE_TB) -#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ - CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ - CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \ - CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ - CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC) -#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) - -/* 64-bit CPUs */ -#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) -#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \ - CPU_FTR_MMCRA | CPU_FTR_CTRL) -#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA) -#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA) -#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR) -#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR) -#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ - CPU_FTR_DSCR | CPU_FTR_SAO) -#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ - CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG) -#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ - CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \ - CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B) -#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \ - CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2) - -#ifdef __powerpc64__ -#define CPU_FTRS_POSSIBLE \ - (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ - CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ - CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) -#else -enum { - CPU_FTRS_POSSIBLE = -#if CLASSIC_PPC - CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | - CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | - CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | - CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 | - CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | - CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | - CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | - CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | - CPU_FTRS_CLASSIC32 | -#else - CPU_FTRS_GENERIC_32 | -#endif -#ifdef CONFIG_8xx - CPU_FTRS_8XX | -#endif -#ifdef CONFIG_40x - CPU_FTRS_40X | -#endif -#ifdef CONFIG_44x - CPU_FTRS_44X | -#endif -#ifdef CONFIG_E200 - CPU_FTRS_E200 | -#endif -#ifdef CONFIG_E500 - CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | -#endif - 0, -}; -#endif /* __powerpc64__ */ - -#ifdef __powerpc64__ -#define CPU_FTRS_ALWAYS \ - (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ - CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ - CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) -#else -enum { - CPU_FTRS_ALWAYS = -#if CLASSIC_PPC - CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & - CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & - CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & - CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 & - CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & - CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & - CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & - CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & - CPU_FTRS_CLASSIC32 & -#else - CPU_FTRS_GENERIC_32 & -#endif -#ifdef CONFIG_8xx - CPU_FTRS_8XX & -#endif -#ifdef CONFIG_40x - CPU_FTRS_40X & -#endif -#ifdef CONFIG_44x - CPU_FTRS_44X & -#endif -#ifdef CONFIG_E200 - CPU_FTRS_E200 & -#endif -#ifdef CONFIG_E500 - CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & -#endif - CPU_FTRS_POSSIBLE, -}; -#endif /* __powerpc64__ */ - -static inline int cpu_has_feature(unsigned long feature) -{ - return (CPU_FTRS_ALWAYS & feature) || - (CPU_FTRS_POSSIBLE - & cur_cpu_spec->cpu_features - & feature); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h deleted file mode 100644 index fb11b0c459b8..000000000000 --- a/include/asm-powerpc/cputhreads.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef _ASM_POWERPC_CPUTHREADS_H -#define _ASM_POWERPC_CPUTHREADS_H - -#include - -/* - * Mapping of threads to cores - */ - -#ifdef CONFIG_SMP -extern int threads_per_core; -extern int threads_shift; -extern cpumask_t threads_core_mask; -#else -#define threads_per_core 1 -#define threads_shift 0 -#define threads_core_mask (CPU_MASK_CPU0) -#endif - -/* cpu_thread_mask_to_cores - Return a cpumask of one per cores - * hit by the argument - * - * @threads: a cpumask of threads - * - * This function returns a cpumask which will have one "cpu" (or thread) - * bit set for each core that has at least one thread set in the argument. - * - * This can typically be used for things like IPI for tlb invalidations - * since those need to be done only once per core/TLB - */ -static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads) -{ - cpumask_t tmp, res; - int i; - - res = CPU_MASK_NONE; - for (i = 0; i < NR_CPUS; i += threads_per_core) { - cpus_shift_left(tmp, threads_core_mask, i); - if (cpus_intersects(threads, tmp)) - cpu_set(i, res); - } - return res; -} - -static inline int cpu_nr_cores(void) -{ - return NR_CPUS >> threads_shift; -} - -static inline cpumask_t cpu_online_cores_map(void) -{ - return cpu_thread_mask_to_cores(cpu_online_map); -} - -static inline int cpu_thread_to_core(int cpu) -{ - return cpu >> threads_shift; -} - -static inline int cpu_thread_in_core(int cpu) -{ - return cpu & (threads_per_core - 1); -} - -static inline int cpu_first_thread_in_core(int cpu) -{ - return cpu & ~(threads_per_core - 1); -} - -#endif /* _ASM_POWERPC_CPUTHREADS_H */ - diff --git a/include/asm-powerpc/cputime.h b/include/asm-powerpc/cputime.h deleted file mode 100644 index f42e623030ee..000000000000 --- a/include/asm-powerpc/cputime.h +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Definitions for measuring cputime on powerpc machines. - * - * Copyright (C) 2006 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in - * the same units as the timebase. Otherwise we measure cpu time - * in jiffies using the generic definitions. - */ - -#ifndef __POWERPC_CPUTIME_H -#define __POWERPC_CPUTIME_H - -#ifndef CONFIG_VIRT_CPU_ACCOUNTING -#include -#else - -#include -#include -#include -#include -#include - -typedef u64 cputime_t; -typedef u64 cputime64_t; - -#define cputime_zero ((cputime_t)0) -#define cputime_max ((~((cputime_t)0) >> 1) - 1) -#define cputime_add(__a, __b) ((__a) + (__b)) -#define cputime_sub(__a, __b) ((__a) - (__b)) -#define cputime_div(__a, __n) ((__a) / (__n)) -#define cputime_halve(__a) ((__a) >> 1) -#define cputime_eq(__a, __b) ((__a) == (__b)) -#define cputime_gt(__a, __b) ((__a) > (__b)) -#define cputime_ge(__a, __b) ((__a) >= (__b)) -#define cputime_lt(__a, __b) ((__a) < (__b)) -#define cputime_le(__a, __b) ((__a) <= (__b)) - -#define cputime64_zero ((cputime64_t)0) -#define cputime64_add(__a, __b) ((__a) + (__b)) -#define cputime64_sub(__a, __b) ((__a) - (__b)) -#define cputime_to_cputime64(__ct) (__ct) - -#ifdef __KERNEL__ - -/* - * Convert cputime <-> jiffies - */ -extern u64 __cputime_jiffies_factor; -DECLARE_PER_CPU(unsigned long, cputime_last_delta); -DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta); - -static inline unsigned long cputime_to_jiffies(const cputime_t ct) -{ - return mulhdu(ct, __cputime_jiffies_factor); -} - -/* Estimate the scaled cputime by scaling the real cputime based on - * the last scaled to real ratio */ -static inline cputime_t cputime_to_scaled(const cputime_t ct) -{ - if (cpu_has_feature(CPU_FTR_SPURR) && - per_cpu(cputime_last_delta, smp_processor_id())) - return ct * - per_cpu(cputime_scaled_last_delta, smp_processor_id())/ - per_cpu(cputime_last_delta, smp_processor_id()); - return ct; -} - -static inline cputime_t jiffies_to_cputime(const unsigned long jif) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = jif % HZ; - sec = jif / HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -static inline cputime64_t jiffies64_to_cputime64(const u64 jif) -{ - cputime_t ct; - u64 sec; - - /* have to be a little careful about overflow */ - ct = jif % HZ; - sec = jif / HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -static inline u64 cputime64_to_jiffies64(const cputime_t ct) -{ - return mulhdu(ct, __cputime_jiffies_factor); -} - -/* - * Convert cputime <-> milliseconds - */ -extern u64 __cputime_msec_factor; - -static inline unsigned long cputime_to_msecs(const cputime_t ct) -{ - return mulhdu(ct, __cputime_msec_factor); -} - -static inline cputime_t msecs_to_cputime(const unsigned long ms) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = ms % 1000; - sec = ms / 1000; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, 1000); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -/* - * Convert cputime <-> seconds - */ -extern u64 __cputime_sec_factor; - -static inline unsigned long cputime_to_secs(const cputime_t ct) -{ - return mulhdu(ct, __cputime_sec_factor); -} - -static inline cputime_t secs_to_cputime(const unsigned long sec) -{ - return (cputime_t) sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> timespec - */ -static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p) -{ - u64 x = ct; - unsigned int frac; - - frac = do_div(x, tb_ticks_per_sec); - p->tv_sec = x; - x = (u64) frac * 1000000000; - do_div(x, tb_ticks_per_sec); - p->tv_nsec = x; -} - -static inline cputime_t timespec_to_cputime(const struct timespec *p) -{ - cputime_t ct; - - ct = (u64) p->tv_nsec * tb_ticks_per_sec; - do_div(ct, 1000000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> timeval - */ -static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p) -{ - u64 x = ct; - unsigned int frac; - - frac = do_div(x, tb_ticks_per_sec); - p->tv_sec = x; - x = (u64) frac * 1000000; - do_div(x, tb_ticks_per_sec); - p->tv_usec = x; -} - -static inline cputime_t timeval_to_cputime(const struct timeval *p) -{ - cputime_t ct; - - ct = (u64) p->tv_usec * tb_ticks_per_sec; - do_div(ct, 1000000); - return ct + (u64) p->tv_sec * tb_ticks_per_sec; -} - -/* - * Convert cputime <-> clock_t (units of 1/USER_HZ seconds) - */ -extern u64 __cputime_clockt_factor; - -static inline unsigned long cputime_to_clock_t(const cputime_t ct) -{ - return mulhdu(ct, __cputime_clockt_factor); -} - -static inline cputime_t clock_t_to_cputime(const unsigned long clk) -{ - cputime_t ct; - unsigned long sec; - - /* have to be a little careful about overflow */ - ct = clk % USER_HZ; - sec = clk / USER_HZ; - if (ct) { - ct *= tb_ticks_per_sec; - do_div(ct, USER_HZ); - } - if (sec) - ct += (cputime_t) sec * tb_ticks_per_sec; - return ct; -} - -#define cputime64_to_clock_t(ct) cputime_to_clock_t((cputime_t)(ct)) - -#endif /* __KERNEL__ */ -#endif /* CONFIG_VIRT_CPU_ACCOUNTING */ -#endif /* __POWERPC_CPUTIME_H */ diff --git a/include/asm-powerpc/current.h b/include/asm-powerpc/current.h deleted file mode 100644 index e2c7f06931e7..000000000000 --- a/include/asm-powerpc/current.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_POWERPC_CURRENT_H -#define _ASM_POWERPC_CURRENT_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct task_struct; - -#ifdef __powerpc64__ -#include -#include - -static inline struct task_struct *get_current(void) -{ - struct task_struct *task; - - __asm__ __volatile__("ld %0,%1(13)" - : "=r" (task) - : "i" (offsetof(struct paca_struct, __current))); - - return task; -} -#define current get_current() - -#else - -/* - * We keep `current' in r2 for speed. - */ -register struct task_struct *current asm ("r2"); - -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h deleted file mode 100644 index e23f07e73cb3..000000000000 --- a/include/asm-powerpc/dbdma.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Definitions for using the Apple Descriptor-Based DMA controller - * in Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - */ - -#ifdef __KERNEL__ -#ifndef _ASM_DBDMA_H_ -#define _ASM_DBDMA_H_ -/* - * DBDMA control/status registers. All little-endian. - */ -struct dbdma_regs { - unsigned int control; /* lets you change bits in status */ - unsigned int status; /* DMA and device status bits (see below) */ - unsigned int cmdptr_hi; /* upper 32 bits of command address */ - unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ - unsigned int intr_sel; /* select interrupt condition bit */ - unsigned int br_sel; /* select branch condition bit */ - unsigned int wait_sel; /* select wait condition bit */ - unsigned int xfer_mode; - unsigned int data2ptr_hi; - unsigned int data2ptr; - unsigned int res1; - unsigned int address_hi; - unsigned int br_addr_hi; - unsigned int res2[3]; -}; - -/* Bits in control and status registers */ -#define RUN 0x8000 -#define PAUSE 0x4000 -#define FLUSH 0x2000 -#define WAKE 0x1000 -#define DEAD 0x0800 -#define ACTIVE 0x0400 -#define BT 0x0100 -#define DEVSTAT 0x00ff - -/* - * DBDMA command structure. These fields are all little-endian! - */ -struct dbdma_cmd { - unsigned short req_count; /* requested byte transfer count */ - unsigned short command; /* command word (has bit-fields) */ - unsigned int phy_addr; /* physical data address */ - unsigned int cmd_dep; /* command-dependent field */ - unsigned short res_count; /* residual count after completion */ - unsigned short xfer_status; /* transfer status */ -}; - -/* DBDMA command values in command field */ -#define OUTPUT_MORE 0 /* transfer memory data to stream */ -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ -#define INPUT_MORE 0x2000 /* transfer stream data to memory */ -#define INPUT_LAST 0x3000 /* ditto, expect end marker */ -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ -#define DBDMA_NOP 0x6000 /* do nothing */ -#define DBDMA_STOP 0x7000 /* suspend processing */ - -/* Key values in command field */ -#define KEY_STREAM0 0 /* usual data stream */ -#define KEY_STREAM1 0x100 /* control/status stream */ -#define KEY_STREAM2 0x200 /* device-dependent stream */ -#define KEY_STREAM3 0x300 /* device-dependent stream */ -#define KEY_REGS 0x500 /* device register space */ -#define KEY_SYSTEM 0x600 /* system memory-mapped space */ -#define KEY_DEVICE 0x700 /* device memory-mapped space */ - -/* Interrupt control values in command field */ -#define INTR_NEVER 0 /* don't interrupt */ -#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ -#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ -#define INTR_ALWAYS 0x30 /* always interrupt */ - -/* Branch control values in command field */ -#define BR_NEVER 0 /* don't branch */ -#define BR_IFSET 0x4 /* branch if condition bit is 1 */ -#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ -#define BR_ALWAYS 0xc /* always branch */ - -/* Wait control values in command field */ -#define WAIT_NEVER 0 /* don't wait */ -#define WAIT_IFSET 1 /* wait if condition bit is 1 */ -#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ -#define WAIT_ALWAYS 3 /* always wait */ - -/* Align an address for a DBDMA command structure */ -#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ - & -sizeof(struct dbdma_cmd)) - -/* Useful macros */ -#define DBDMA_DO_STOP(regs) do { \ - out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ - while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ - ; \ -} while(0) - -#define DBDMA_DO_RESET(regs) do { \ - out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ - while(in_le32(&((regs)->status)) & (RUN)) \ - ; \ -} while(0) - -#endif /* _ASM_DBDMA_H_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h deleted file mode 100644 index 35b71599ec46..000000000000 --- a/include/asm-powerpc/dcr-generic.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_GENERIC_H -#define _ASM_POWERPC_DCR_GENERIC_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; - -typedef struct { - enum host_type_t type; - union { - dcr_host_mmio_t mmio; - dcr_host_native_t native; - } host; -} dcr_host_t; - -extern bool dcr_map_ok_generic(dcr_host_t host); - -extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); - -extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); - -extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_GENERIC_H */ - - diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h deleted file mode 100644 index acd491dbd45a..000000000000 --- a/include/asm-powerpc/dcr-mmio.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_MMIO_H -#define _ASM_POWERPC_DCR_MMIO_H -#ifdef __KERNEL__ - -#include - -typedef struct { - void __iomem *token; - unsigned int stride; - unsigned int base; -} dcr_host_mmio_t; - -static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) -{ - return host.token != NULL; -} - -extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, - unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); - -static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) -{ - return in_be32(host.token + ((host.base + dcr_n) * host.stride)); -} - -static inline void dcr_write_mmio(dcr_host_mmio_t host, - unsigned int dcr_n, - u32 value) -{ - out_be32(host.token + ((host.base + dcr_n) * host.stride), value); -} - -extern u64 of_translate_dcr_address(struct device_node *dev, - unsigned int dcr_n, - unsigned int *stride); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_MMIO_H */ - - diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h deleted file mode 100644 index 72d2b72c7390..000000000000 --- a/include/asm-powerpc/dcr-native.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_NATIVE_H -#define _ASM_POWERPC_DCR_NATIVE_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include - -typedef struct { - unsigned int base; -} dcr_host_native_t; - -static inline bool dcr_map_ok_native(dcr_host_native_t host) -{ - return 1; -} - -#define dcr_map_native(dev, dcr_n, dcr_c) \ - ((dcr_host_native_t){ .base = (dcr_n) }) -#define dcr_unmap_native(host, dcr_c) do {} while (0) -#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) -#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) - -/* Device Control Registers */ -void __mtdcr(int reg, unsigned int val); -unsigned int __mfdcr(int reg); -#define mfdcr(rn) \ - ({unsigned int rval; \ - if (__builtin_constant_p(rn)) \ - asm volatile("mfdcr %0," __stringify(rn) \ - : "=r" (rval)); \ - else \ - rval = __mfdcr(rn); \ - rval;}) - -#define mtdcr(rn, v) \ -do { \ - if (__builtin_constant_p(rn)) \ - asm volatile("mtdcr " __stringify(rn) ",%0" \ - : : "r" (v)); \ - else \ - __mtdcr(rn, v); \ -} while (0) - -/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ -extern spinlock_t dcr_ind_lock; - -static inline unsigned __mfdcri(int base_addr, int base_data, int reg) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - val = __mfdcr(base_data); - spin_unlock_irqrestore(&dcr_ind_lock, flags); - return val; -} - -static inline void __mtdcri(int base_addr, int base_data, int reg, - unsigned val) -{ - unsigned long flags; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - __mtdcr(base_data, val); - spin_unlock_irqrestore(&dcr_ind_lock, flags); -} - -static inline void __dcri_clrset(int base_addr, int base_data, int reg, - unsigned clr, unsigned set) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&dcr_ind_lock, flags); - __mtdcr(base_addr, reg); - val = (__mfdcr(base_data) & ~clr) | set; - __mtdcr(base_data, val); - spin_unlock_irqrestore(&dcr_ind_lock, flags); -} - -#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg) - -#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg, data) - -#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ - DCRN_ ## base ## _CONFIG_DATA, \ - reg, clr, set) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h deleted file mode 100644 index 29b0ecef980a..000000000000 --- a/include/asm-powerpc/dcr-regs.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Common DCR / SDR / CPR register definitions used on various IBM/AMCC - * 4xx processors - * - * Copyright 2007 Benjamin Herrenschmidt, IBM Corp - * - * - * Mostly lifted from asm-ppc/ibm4xx.h by - * - * Copyright (c) 1999 Grant Erickson - * - */ - -#ifndef __DCR_REGS_H__ -#define __DCR_REGS_H__ - -/* - * Most DCRs used for controlling devices such as the MAL, DMA engine, - * etc... are obtained for the device tree. - * - * The definitions in this files are fixed DCRs and indirect DCRs that - * are commonly used outside of specific drivers or refer to core - * common registers that may occasionally have to be tweaked outside - * of the driver main register set - */ - -/* CPRs (440GX and 440SP/440SPe) */ -#define DCRN_CPR0_CONFIG_ADDR 0xc -#define DCRN_CPR0_CONFIG_DATA 0xd - -/* SDRs (440GX and 440SP/440SPe) */ -#define DCRN_SDR0_CONFIG_ADDR 0xe -#define DCRN_SDR0_CONFIG_DATA 0xf - -#define SDR0_PFC0 0x4100 -#define SDR0_PFC1 0x4101 -#define SDR0_PFC1_EPS 0x1c00000 -#define SDR0_PFC1_EPS_SHIFT 22 -#define SDR0_PFC1_RMII 0x02000000 -#define SDR0_MFR 0x4300 -#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ -#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ -#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ -#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ -#define SDR0_MFR_T0TXFL 0x00080000 -#define SDR0_MFR_T0TXFH 0x00040000 -#define SDR0_MFR_T1TXFL 0x00020000 -#define SDR0_MFR_T1TXFH 0x00010000 -#define SDR0_MFR_E0TXFL 0x00008000 -#define SDR0_MFR_E0TXFH 0x00004000 -#define SDR0_MFR_E0RXFL 0x00002000 -#define SDR0_MFR_E0RXFH 0x00001000 -#define SDR0_MFR_E1TXFL 0x00000800 -#define SDR0_MFR_E1TXFH 0x00000400 -#define SDR0_MFR_E1RXFL 0x00000200 -#define SDR0_MFR_E1RXFH 0x00000100 -#define SDR0_MFR_E2TXFL 0x00000080 -#define SDR0_MFR_E2TXFH 0x00000040 -#define SDR0_MFR_E2RXFL 0x00000020 -#define SDR0_MFR_E2RXFH 0x00000010 -#define SDR0_MFR_E3TXFL 0x00000008 -#define SDR0_MFR_E3TXFH 0x00000004 -#define SDR0_MFR_E3RXFL 0x00000002 -#define SDR0_MFR_E3RXFH 0x00000001 -#define SDR0_UART0 0x0120 -#define SDR0_UART1 0x0121 -#define SDR0_UART2 0x0122 -#define SDR0_UART3 0x0123 -#define SDR0_CUST0 0x4000 - -/* - * All those DCR register addresses are offsets from the base address - * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is - * excluded here and configured in the device tree. - */ -#define DCRN_SRAM0_SB0CR 0x00 -#define DCRN_SRAM0_SB1CR 0x01 -#define DCRN_SRAM0_SB2CR 0x02 -#define DCRN_SRAM0_SB3CR 0x03 -#define SRAM_SBCR_BU_MASK 0x00000180 -#define SRAM_SBCR_BS_64KB 0x00000800 -#define SRAM_SBCR_BU_RO 0x00000080 -#define SRAM_SBCR_BU_RW 0x00000180 -#define DCRN_SRAM0_BEAR 0x04 -#define DCRN_SRAM0_BESR0 0x05 -#define DCRN_SRAM0_BESR1 0x06 -#define DCRN_SRAM0_PMEG 0x07 -#define DCRN_SRAM0_CID 0x08 -#define DCRN_SRAM0_REVID 0x09 -#define DCRN_SRAM0_DPC 0x0a -#define SRAM_DPC_ENABLE 0x80000000 - -/* - * All those DCR register addresses are offsets from the base address - * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is - * excluded here and configured in the device tree. - */ -#define DCRN_L2C0_CFG 0x00 -#define L2C_CFG_L2M 0x80000000 -#define L2C_CFG_ICU 0x40000000 -#define L2C_CFG_DCU 0x20000000 -#define L2C_CFG_DCW_MASK 0x1e000000 -#define L2C_CFG_TPC 0x01000000 -#define L2C_CFG_CPC 0x00800000 -#define L2C_CFG_FRAN 0x00200000 -#define L2C_CFG_SS_MASK 0x00180000 -#define L2C_CFG_SS_256 0x00000000 -#define L2C_CFG_CPIM 0x00040000 -#define L2C_CFG_TPIM 0x00020000 -#define L2C_CFG_LIM 0x00010000 -#define L2C_CFG_PMUX_MASK 0x00007000 -#define L2C_CFG_PMUX_SNP 0x00000000 -#define L2C_CFG_PMUX_IF 0x00001000 -#define L2C_CFG_PMUX_DF 0x00002000 -#define L2C_CFG_PMUX_DS 0x00003000 -#define L2C_CFG_PMIM 0x00000800 -#define L2C_CFG_TPEI 0x00000400 -#define L2C_CFG_CPEI 0x00000200 -#define L2C_CFG_NAM 0x00000100 -#define L2C_CFG_SMCM 0x00000080 -#define L2C_CFG_NBRM 0x00000040 -#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ -#define DCRN_L2C0_CMD 0x01 -#define L2C_CMD_CLR 0x80000000 -#define L2C_CMD_DIAG 0x40000000 -#define L2C_CMD_INV 0x20000000 -#define L2C_CMD_CCP 0x10000000 -#define L2C_CMD_CTE 0x08000000 -#define L2C_CMD_STRC 0x04000000 -#define L2C_CMD_STPC 0x02000000 -#define L2C_CMD_RPMC 0x01000000 -#define L2C_CMD_HCC 0x00800000 -#define DCRN_L2C0_ADDR 0x02 -#define DCRN_L2C0_DATA 0x03 -#define DCRN_L2C0_SR 0x04 -#define L2C_SR_CC 0x80000000 -#define L2C_SR_CPE 0x40000000 -#define L2C_SR_TPE 0x20000000 -#define L2C_SR_LRU 0x10000000 -#define L2C_SR_PCS 0x08000000 -#define DCRN_L2C0_REVID 0x05 -#define DCRN_L2C0_SNP0 0x06 -#define DCRN_L2C0_SNP1 0x07 -#define L2C_SNP_BA_MASK 0xffff0000 -#define L2C_SNP_SSR_MASK 0x0000f000 -#define L2C_SNP_SSR_32G 0x0000f000 -#define L2C_SNP_ESR 0x00000800 - -#endif /* __DCR_REGS_H__ */ diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h deleted file mode 100644 index 53b283050ab3..000000000000 --- a/include/asm-powerpc/dcr.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_DCR_H -#define _ASM_POWERPC_DCR_H -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#ifdef CONFIG_PPC_DCR - -#ifdef CONFIG_PPC_DCR_NATIVE -#include -#endif - -#ifdef CONFIG_PPC_DCR_MMIO -#include -#endif - - -/* Indirection layer for providing both NATIVE and MMIO support. */ - -#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) - -#include - -#define DCR_MAP_OK(host) dcr_map_ok_generic(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) - -#else - -#ifdef CONFIG_PPC_DCR_NATIVE -typedef dcr_host_native_t dcr_host_t; -#define DCR_MAP_OK(host) dcr_map_ok_native(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) -#else -typedef dcr_host_mmio_t dcr_host_t; -#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) -#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) -#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) -#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) -#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) -#endif - -#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ - -/* - * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR - * base from the device-tree - */ -#ifdef CONFIG_PPC_MERGE -struct device_node; -extern unsigned int dcr_resource_start(struct device_node *np, - unsigned int index); -extern unsigned int dcr_resource_len(struct device_node *np, - unsigned int index); -#endif /* CONFIG_PPC_MERGE */ - -#endif /* CONFIG_PPC_DCR */ -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DCR_H */ diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h deleted file mode 100644 index f9200a65c632..000000000000 --- a/include/asm-powerpc/delay.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_POWERPC_DELAY_H -#define _ASM_POWERPC_DELAY_H -#ifdef __KERNEL__ - -/* - * Copyright 1996, Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan, - * Anton Blanchard. - */ - -extern void __delay(unsigned long loops); -extern void udelay(unsigned long usecs); - -/* - * On shared processor machines the generic implementation of mdelay can - * result in large errors. While each iteration of the loop inside mdelay - * is supposed to take 1ms, the hypervisor could sleep our partition for - * longer (eg 10ms). With the right timing these errors can add up. - * - * Since there is no 32bit overflow issue on 64bit kernels, just call - * udelay directly. - */ -#ifdef CONFIG_PPC64 -#define mdelay(n) udelay((n) * 1000) -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/include/asm-powerpc/device.h b/include/asm-powerpc/device.h deleted file mode 100644 index 228ab2a315b9..000000000000 --- a/include/asm-powerpc/device.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef _ASM_POWERPC_DEVICE_H -#define _ASM_POWERPC_DEVICE_H - -struct dma_mapping_ops; -struct device_node; - -struct dev_archdata { - /* Optional pointer to an OF device node */ - struct device_node *of_node; - - /* DMA operations on that device */ - struct dma_mapping_ops *dma_ops; - void *dma_data; - - /* NUMA node if applicable */ - int numa_node; -}; - -#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/include/asm-powerpc/div64.h b/include/asm-powerpc/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-powerpc/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h deleted file mode 100644 index c7ca45f97dd2..000000000000 --- a/include/asm-powerpc/dma-mapping.h +++ /dev/null @@ -1,474 +0,0 @@ -/* - * Copyright (C) 2004 IBM - * - * Implements the generic device dma API for powerpc. - * the pci and vio busses - */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H -#ifdef __KERNEL__ - -#include -#include -/* need struct page definitions */ -#include -#include -#include -#include - -#define DMA_ERROR_CODE (~(dma_addr_t)0x0) - -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * DMA-consistent mapping functions for PowerPCs that don't support - * cache snooping. These allocate/free a region of uncached mapped - * memory space for use with DMA devices. Alternatively, you could - * allocate the space "normally" and use the cache management functions - * to ensure it is consistent. - */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); -extern void __dma_free_coherent(size_t size, void *vaddr); -extern void __dma_sync(void *vaddr, size_t size, int direction); -extern void __dma_sync_page(struct page *page, unsigned long offset, - size_t size, int direction); - -#else /* ! CONFIG_NOT_COHERENT_CACHE */ -/* - * Cache coherent cores. - */ - -#define __dma_alloc_coherent(gfp, size, handle) NULL -#define __dma_free_coherent(size, addr) ((void)0) -#define __dma_sync(addr, size, rw) ((void)0) -#define __dma_sync_page(pg, off, sz, rw) ((void)0) - -#endif /* ! CONFIG_NOT_COHERENT_CACHE */ - -#ifdef CONFIG_PPC64 - -static inline unsigned long device_to_mask(struct device *dev) -{ - if (dev->dma_mask && *dev->dma_mask) - return *dev->dma_mask; - /* Assume devices without mask can take 32 bit addresses */ - return 0xfffffffful; -} - -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs); - int (*dma_supported)(struct device *dev, u64 mask); - int (*set_dma_mask)(struct device *dev, u64 dma_mask); -}; - -static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) -{ - /* We don't handle the NULL dev case for ISA for now. We could - * do it via an out of line call but it is not needed for now. The - * only ISA DMA device we support is the floppy and we have a hack - * in the floppy driver directly to get a device for us. - */ - if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL)) - return NULL; - return dev->archdata.dma_ops; -} - -static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops) -{ - dev->archdata.dma_ops = ops; -} - -static inline int dma_supported(struct device *dev, u64 mask) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (unlikely(dma_ops == NULL)) - return 0; - if (dma_ops->dma_supported == NULL) - return 1; - return dma_ops->dma_supported(dev, mask); -} - -/* We have our own implementation of pci_set_dma_mask() */ -#define HAVE_ARCH_PCI_SET_DMA_MASK - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (unlikely(dma_ops == NULL)) - return -EIO; - if (dma_ops->set_dma_mask != NULL) - return dma_ops->set_dma_mask(dev, dma_mask); - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - *dev->dma_mask = dma_mask; - return 0; -} - -static inline dma_addr_t dma_map_single_attrs(struct device *dev, - void *cpu_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, cpu_addr, size, direction, attrs); -} - -static inline void dma_unmap_single_attrs(struct device *dev, - dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_addr, size, direction, attrs); -} - -static inline dma_addr_t dma_map_page_attrs(struct device *dev, - struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, page_address(page) + offset, size, - direction, attrs); -} - -static inline void dma_unmap_page_attrs(struct device *dev, - dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_address, size, direction, attrs); -} - -static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_sg(dev, sg, nents, direction, attrs); -} - -static inline void dma_unmap_sg_attrs(struct device *dev, - struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); -} - -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); -} - -static inline void dma_free_coherent(struct device *dev, size_t size, - void *cpu_addr, dma_addr_t dma_handle) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); -} - -static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, - enum dma_data_direction direction) -{ - return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); -} - -static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - return dma_map_page_attrs(dev, page, offset, size, direction, NULL); -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); -} - -static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - return dma_map_sg_attrs(dev, sg, nents, direction, NULL); -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); -} - -/* - * Available generic sets of operations - */ -extern struct dma_mapping_ops dma_iommu_ops; -extern struct dma_mapping_ops dma_direct_ops; - -#else /* CONFIG_PPC64 */ - -#define dma_supported(dev, mask) (1) - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ - if (!dev->dma_mask || !dma_supported(dev, mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - - return 0; -} - -static inline void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t * dma_handle, - gfp_t gfp) -{ -#ifdef CONFIG_NOT_COHERENT_CACHE - return __dma_alloc_coherent(size, dma_handle, gfp); -#else - void *ret; - /* ignore region specifiers */ - gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); - - if (dev == NULL || dev->coherent_dma_mask < 0xffffffff) - gfp |= GFP_DMA; - - ret = (void *)__get_free_pages(gfp, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_bus(ret); - } - - return ret; -#endif -} - -static inline void -dma_free_coherent(struct device *dev, size_t size, void *vaddr, - dma_addr_t dma_handle) -{ -#ifdef CONFIG_NOT_COHERENT_CACHE - __dma_free_coherent(size, vaddr); -#else - free_pages((unsigned long)vaddr, get_order(size)); -#endif -} - -static inline dma_addr_t -dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - __dma_sync(ptr, size, direction); - - return virt_to_bus(ptr); -} - -static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, - enum dma_data_direction direction) -{ - /* We do nothing. */ -} - -static inline dma_addr_t -dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - __dma_sync_page(page, offset, size, direction); - - return page_to_bus(page) + offset; -} - -static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, - enum dma_data_direction direction) -{ - /* We do nothing. */ -} - -static inline int -dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) { - BUG_ON(!sg_page(sg)); - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); - sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset; - } - - return nents; -} - -static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, - enum dma_data_direction direction) -{ - /* We don't do anything here. */ -} - -#endif /* CONFIG_PPC64 */ - -static inline void dma_sync_single_for_cpu(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); -} - -static inline void dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); -} - -static inline void dma_sync_sg_for_cpu(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); -} - -static inline void dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sgl, int nents, - enum dma_data_direction direction) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - for_each_sg(sgl, sg, nents, i) - __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); -} - -static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) -{ -#ifdef CONFIG_PPC64 - return (dma_addr == DMA_ERROR_CODE); -#else - return 0; -#endif -} - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#ifdef CONFIG_NOT_COHERENT_CACHE -#define dma_is_consistent(d, h) (0) -#else -#define dma_is_consistent(d, h) (1) -#endif - -static inline int dma_get_cache_alignment(void) -{ -#ifdef CONFIG_PPC64 - /* no easy way to get cache size on all processors, so return - * the maximum possible, to be safe */ - return (1 << INTERNODE_CACHE_SHIFT); -#else - /* - * Each processor family will define its own L1_CACHE_SHIFT, - * L1_CACHE_BYTES wraps to this, so this is always safe. - */ - return L1_CACHE_BYTES; -#endif -} - -static inline void dma_sync_single_range_for_cpu(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); -} - -static inline void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - /* just sync everything for now */ - dma_sync_single_for_device(dev, dma_handle, offset + size, direction); -} - -static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - __dma_sync(vaddr, size, (int)direction); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-powerpc/dma.h b/include/asm-powerpc/dma.h deleted file mode 100644 index a7e06e25c708..000000000000 --- a/include/asm-powerpc/dma.h +++ /dev/null @@ -1,360 +0,0 @@ -#ifndef _ASM_POWERPC_DMA_H -#define _ASM_POWERPC_DMA_H -#ifdef __KERNEL__ - -/* - * Defines for using and allocating dma channels. - * Written by Hennus Bergman, 1992. - * High DMA channel support & info by Hannu Savolainen - * and John Boyd, Nov. 1992. - * Changes for ppc sound by Christoph Nadig - */ - -/* - * Note: Adapted for PowerPC by Gary Thomas - * Modified by Cort Dougan - * - * None of this really applies for Power Macintoshes. There is - * basically just enough here to get kernel/dma.c to compile. - * - * There may be some comments or restrictions made here which are - * not valid for the PReP platform. Take what you read - * with a grain of salt. - */ - -#include -#include -#include - -#ifndef MAX_DMA_CHANNELS -#define MAX_DMA_CHANNELS 8 -#endif - -/* The maximum address that we can perform a DMA transfer to on this platform */ -/* Doesn't really apply... */ -#define MAX_DMA_ADDRESS (~0UL) - -#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) - -#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER -#define dma_outb outb_p -#else -#define dma_outb outb -#endif - -#define dma_inb inb - -/* - * NOTES about DMA transfers: - * - * controller 1: channels 0-3, byte operations, ports 00-1F - * controller 2: channels 4-7, word operations, ports C0-DF - * - * - ALL registers are 8 bits only, regardless of transfer size - * - channel 4 is not used - cascades 1 into 2. - * - channels 0-3 are byte - addresses/counts are for physical bytes - * - channels 5-7 are word - addresses/counts are for physical words - * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries - * - transfer count loaded to registers is 1 less than actual count - * - controller 2 offsets are all even (2x offsets for controller 1) - * - page registers for 5-7 don't use data bit 0, represent 128K pages - * - page registers for 0-3 use bit 0, represent 64K pages - * - * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory. - * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. - * Note that addresses loaded into registers must be _physical_ addresses, - * not logical addresses (which may differ if paging is active). - * - * Address mapping for channels 0-3: - * - * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * | ... | | ... | | ... | - * P7 ... P0 A7 ... A0 A7 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Address mapping for channels 5-7: - * - * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) - * | ... | \ \ ... \ \ \ ... \ \ - * | ... | \ \ ... \ \ \ ... \ (not used) - * | ... | \ \ ... \ \ \ ... \ - * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 - * | Page | Addr MSB | Addr LSB | (DMA registers) - * - * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses - * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at - * the hardware level, so odd-byte transfers aren't possible). - * - * Transfer count (_not # bytes_) is limited to 64K, represented as actual - * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, - * and up to 128K bytes may be transferred on channels 5-7 in one operation. - * - */ - -/* 8237 DMA controllers */ -#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ -#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ - -/* DMA controller registers */ -#define DMA1_CMD_REG 0x08 /* command register (w) */ -#define DMA1_STAT_REG 0x08 /* status register (r) */ -#define DMA1_REQ_REG 0x09 /* request register (w) */ -#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ -#define DMA1_MODE_REG 0x0B /* mode register (w) */ -#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ -#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ -#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ -#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ -#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ - -#define DMA2_CMD_REG 0xD0 /* command register (w) */ -#define DMA2_STAT_REG 0xD0 /* status register (r) */ -#define DMA2_REQ_REG 0xD2 /* request register (w) */ -#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ -#define DMA2_MODE_REG 0xD6 /* mode register (w) */ -#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ -#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ -#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ -#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ -#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ - -#define DMA_ADDR_0 0x00 /* DMA address registers */ -#define DMA_ADDR_1 0x02 -#define DMA_ADDR_2 0x04 -#define DMA_ADDR_3 0x06 -#define DMA_ADDR_4 0xC0 -#define DMA_ADDR_5 0xC4 -#define DMA_ADDR_6 0xC8 -#define DMA_ADDR_7 0xCC - -#define DMA_CNT_0 0x01 /* DMA count registers */ -#define DMA_CNT_1 0x03 -#define DMA_CNT_2 0x05 -#define DMA_CNT_3 0x07 -#define DMA_CNT_4 0xC2 -#define DMA_CNT_5 0xC6 -#define DMA_CNT_6 0xCA -#define DMA_CNT_7 0xCE - -#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ -#define DMA_LO_PAGE_1 0x83 -#define DMA_LO_PAGE_2 0x81 -#define DMA_LO_PAGE_3 0x82 -#define DMA_LO_PAGE_5 0x8B -#define DMA_LO_PAGE_6 0x89 -#define DMA_LO_PAGE_7 0x8A - -#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ -#define DMA_HI_PAGE_1 0x483 -#define DMA_HI_PAGE_2 0x481 -#define DMA_HI_PAGE_3 0x482 -#define DMA_HI_PAGE_5 0x48B -#define DMA_HI_PAGE_6 0x489 -#define DMA_HI_PAGE_7 0x48A - -#define DMA1_EXT_REG 0x40B -#define DMA2_EXT_REG 0x4D6 - -#ifndef __powerpc64__ - /* in arch/ppc/kernel/setup.c -- Cort */ - extern unsigned int DMA_MODE_WRITE; - extern unsigned int DMA_MODE_READ; - extern unsigned long ISA_DMA_THRESHOLD; -#else - #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ - #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ -#endif - -#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ - -#define DMA_AUTOINIT 0x10 - -extern spinlock_t dma_spin_lock; - -static __inline__ unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static __inline__ void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - unsigned char ucDmaCmd = 0x00; - - if (dmanr != 4) { - dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ - dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ - } - if (dmanr <= 3) { - dma_outb(dmanr, DMA1_MASK_REG); - dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ - } else { - dma_outb(dmanr & 3, DMA2_MASK_REG); - } -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(dmanr | 4, DMA1_MASK_REG); - else - dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); -} - -/* Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ - if (dmanr <= 3) - dma_outb(0, DMA1_CLEAR_FF_REG); - else - dma_outb(0, DMA2_CLEAR_FF_REG); -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - if (dmanr <= 3) - dma_outb(mode | dmanr, DMA1_MODE_REG); - else - dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); -} - -/* Set only the page register bits of the transfer address. - * This is used for successive transfers when we know the contents of - * the lower 16 bits of the DMA current address register, but a 64k boundary - * may have been crossed. - */ -static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) -{ - switch (dmanr) { - case 0: - dma_outb(pagenr, DMA_LO_PAGE_0); - dma_outb(pagenr >> 8, DMA_HI_PAGE_0); - break; - case 1: - dma_outb(pagenr, DMA_LO_PAGE_1); - dma_outb(pagenr >> 8, DMA_HI_PAGE_1); - break; - case 2: - dma_outb(pagenr, DMA_LO_PAGE_2); - dma_outb(pagenr >> 8, DMA_HI_PAGE_2); - break; - case 3: - dma_outb(pagenr, DMA_LO_PAGE_3); - dma_outb(pagenr >> 8, DMA_HI_PAGE_3); - break; - case 5: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); - dma_outb(pagenr >> 8, DMA_HI_PAGE_5); - break; - case 6: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); - dma_outb(pagenr >> 8, DMA_HI_PAGE_6); - break; - case 7: - dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); - dma_outb(pagenr >> 8, DMA_HI_PAGE_7); - break; - } -} - -/* Set transfer address & page bits for specific DMA channel. - * Assumes dma flipflop is clear. - */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) -{ - if (dmanr <= 3) { - dma_outb(phys & 0xff, - ((dmanr & 3) << 1) + IO_DMA1_BASE); - dma_outb((phys >> 8) & 0xff, - ((dmanr & 3) << 1) + IO_DMA1_BASE); - } else { - dma_outb((phys >> 1) & 0xff, - ((dmanr & 3) << 2) + IO_DMA2_BASE); - dma_outb((phys >> 9) & 0xff, - ((dmanr & 3) << 2) + IO_DMA2_BASE); - } - set_dma_page(dmanr, phys >> 16); -} - - -/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for - * a specific DMA channel. - * You must ensure the parameters are valid. - * NOTE: from a manual: "the number of transfers is one more - * than the initial word count"! This is taken into account. - * Assumes dma flip-flop is clear. - * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - count--; - if (dmanr <= 3) { - dma_outb(count & 0xff, - ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); - dma_outb((count >> 8) & 0xff, - ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); - } else { - dma_outb((count >> 1) & 0xff, - ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); - dma_outb((count >> 9) & 0xff, - ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); - } -} - - -/* Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * If called before the channel has been used, it may return 1. - * Otherwise, it returns the number of _bytes_ left to transfer. - * - * Assumes DMA flip-flop is clear. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - unsigned int io_port = (dmanr <= 3) - ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE - : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; - - /* using short to get 16-bit wrap around */ - unsigned short count; - - count = 1 + dma_inb(io_port); - count += dma_inb(io_port) << 8; - - return (dmanr <= 3) ? count : (count << 1); -} - -/* These are in kernel/dma.c: */ - -/* reserve a DMA channel */ -extern int request_dma(unsigned int dmanr, const char *device_id); -/* release it again */ -extern void free_dma(unsigned int dmanr); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_DMA_H */ diff --git a/include/asm-powerpc/edac.h b/include/asm-powerpc/edac.h deleted file mode 100644 index 6ead88bbfbb8..000000000000 --- a/include/asm-powerpc/edac.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * PPC EDAC common defs - * - * Author: Dave Jiang - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef ASM_EDAC_H -#define ASM_EDAC_H -/* - * ECC atomic, DMA, SMP and interrupt safe scrub function. - * Implements the per arch atomic_scrub() that EDAC use for software - * ECC scrubbing. It reads memory and then writes back the original - * value, allowing the hardware to detect and correct memory errors. - */ -static __inline__ void atomic_scrub(void *va, u32 size) -{ - unsigned int *virt_addr = va; - unsigned int temp; - unsigned int i; - - for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { - /* Very carefully read and write to memory atomically - * so we are interrupt, DMA and SMP safe. - */ - __asm__ __volatile__ ("\n\ - 1: lwarx %0,0,%1\n\ - stwcx. %0,0,%1\n\ - bne- 1b\n\ - isync" - : "=&r"(temp) - : "r"(virt_addr) - : "cr0", "memory"); - } -} - -#endif diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h deleted file mode 100644 index b886bec67016..000000000000 --- a/include/asm-powerpc/eeh.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * eeh.h - * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_EEH_H -#define _PPC64_EEH_H -#ifdef __KERNEL__ - -#include -#include -#include - -struct pci_dev; -struct pci_bus; -struct device_node; - -#ifdef CONFIG_EEH - -extern int eeh_subsystem_enabled; - -/* Values for eeh_mode bits in device_node */ -#define EEH_MODE_SUPPORTED (1<<0) -#define EEH_MODE_NOCHECK (1<<1) -#define EEH_MODE_ISOLATED (1<<2) -#define EEH_MODE_RECOVERING (1<<3) -#define EEH_MODE_IRQ_DISABLED (1<<4) - -/* Max number of EEH freezes allowed before we consider the device - * to be permanently disabled. */ -#define EEH_MAX_ALLOWED_FREEZES 5 - -void __init eeh_init(void); -unsigned long eeh_check_failure(const volatile void __iomem *token, - unsigned long val); -int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); -void __init pci_addr_cache_build(void); - -/** - * eeh_add_device_early - * eeh_add_device_late - * - * Perform eeh initialization for devices added after boot. - * Call eeh_add_device_early before doing any i/o to the - * device (including config space i/o). Call eeh_add_device_late - * to finish the eeh setup for this device. - */ -void eeh_add_device_tree_early(struct device_node *); -void eeh_add_device_tree_late(struct pci_bus *); - -/** - * eeh_remove_device_recursive - undo EEH for device & children. - * @dev: pci device to be removed - * - * As above, this removes the device; it also removes child - * pci devices as well. - */ -void eeh_remove_bus_device(struct pci_dev *); - -/** - * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. - * - * If this macro yields TRUE, the caller relays to eeh_check_failure() - * which does further tests out of line. - */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) - -/* - * Reads from a device which has been isolated by EEH will return - * all 1s. This macro gives an all-1s value of the given size (in - * bytes: 1, 2, or 4) for comparing with the result of a read. - */ -#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) - -#else /* !CONFIG_EEH */ -static inline void eeh_init(void) { } - -static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) -{ - return val; -} - -static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) -{ - return 0; -} - -static inline void pci_addr_cache_build(void) { } - -static inline void eeh_add_device_tree_early(struct device_node *dn) { } - -static inline void eeh_add_device_tree_late(struct pci_bus *bus) { } - -static inline void eeh_remove_bus_device(struct pci_dev *dev) { } -#define EEH_POSSIBLE_ERROR(val, type) (0) -#define EEH_IO_ERROR_VALUE(size) (-1UL) -#endif /* CONFIG_EEH */ - -/* - * MMIO read/write operations with EEH support. - */ -static inline u8 eeh_readb(const volatile void __iomem *addr) -{ - u8 val = in_8(addr); - if (EEH_POSSIBLE_ERROR(val, u8)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u16 eeh_readw(const volatile void __iomem *addr) -{ - u16 val = in_le16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u32 eeh_readl(const volatile void __iomem *addr) -{ - u32 val = in_le32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u64 eeh_readq(const volatile void __iomem *addr) -{ - u64 val = in_le64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u16 eeh_readw_be(const volatile void __iomem *addr) -{ - u16 val = in_be16(addr); - if (EEH_POSSIBLE_ERROR(val, u16)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u32 eeh_readl_be(const volatile void __iomem *addr) -{ - u32 val = in_be32(addr); - if (EEH_POSSIBLE_ERROR(val, u32)) - return eeh_check_failure(addr, val); - return val; -} - -static inline u64 eeh_readq_be(const volatile void __iomem *addr) -{ - u64 val = in_be64(addr); - if (EEH_POSSIBLE_ERROR(val, u64)) - return eeh_check_failure(addr, val); - return val; -} - -static inline void eeh_memcpy_fromio(void *dest, const - volatile void __iomem *src, - unsigned long n) -{ - _memcpy_fromio(dest, src, n); - - /* Look for ffff's here at dest[n]. Assume that at least 4 bytes - * were copied. Check all four bytes. - */ - if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) - eeh_check_failure(src, *((u32 *)(dest + n - 4))); -} - -/* in-string eeh macros */ -static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, - int ns) -{ - _insb(addr, buf, ns); - if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) - eeh_check_failure(addr, *(u8*)buf); -} - -static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, - int ns) -{ - _insw(addr, buf, ns); - if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) - eeh_check_failure(addr, *(u16*)buf); -} - -static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, - int nl) -{ - _insl(addr, buf, nl); - if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) - eeh_check_failure(addr, *(u32*)buf); -} - -#endif /* __KERNEL__ */ -#endif /* _PPC64_EEH_H */ diff --git a/include/asm-powerpc/eeh_event.h b/include/asm-powerpc/eeh_event.h deleted file mode 100644 index cc3cb04539ac..000000000000 --- a/include/asm-powerpc/eeh_event.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * eeh_event.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (c) 2005 Linas Vepstas - */ - -#ifndef ASM_POWERPC_EEH_EVENT_H -#define ASM_POWERPC_EEH_EVENT_H -#ifdef __KERNEL__ - -/** EEH event -- structure holding pci controller data that describes - * a change in the isolation status of a PCI slot. A pointer - * to this struct is passed as the data pointer in a notify callback. - */ -struct eeh_event { - struct list_head list; - struct device_node *dn; /* struct device node */ - struct pci_dev *dev; /* affected device */ -}; - -/** - * eeh_send_failure_event - generate a PCI error event - * @dev pci device - * - * This routine builds a PCI error event which will be delivered - * to all listeners on the eeh_notifier_chain. - * - * This routine can be called within an interrupt context; - * the actual event will be delivered in a normal context - * (from a workqueue). - */ -int eeh_send_failure_event (struct device_node *dn, - struct pci_dev *dev); - -/* Main recovery function */ -struct pci_dn * handle_eeh_events (struct eeh_event *); - -#endif /* __KERNEL__ */ -#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h deleted file mode 100644 index 80d1f399ee51..000000000000 --- a/include/asm-powerpc/elf.h +++ /dev/null @@ -1,424 +0,0 @@ -#ifndef _ASM_POWERPC_ELF_H -#define _ASM_POWERPC_ELF_H - -#ifdef __KERNEL__ -#include /* for task_struct */ -#include -#include -#endif - -#include -#include -#include -#include - -/* PowerPC relocations defined by the ABIs */ -#define R_PPC_NONE 0 -#define R_PPC_ADDR32 1 /* 32bit absolute address */ -#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */ -#define R_PPC_ADDR16 3 /* 16bit absolute address */ -#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */ -#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */ -#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */ -#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */ -#define R_PPC_ADDR14_BRTAKEN 8 -#define R_PPC_ADDR14_BRNTAKEN 9 -#define R_PPC_REL24 10 /* PC relative 26 bit */ -#define R_PPC_REL14 11 /* PC relative 16 bit */ -#define R_PPC_REL14_BRTAKEN 12 -#define R_PPC_REL14_BRNTAKEN 13 -#define R_PPC_GOT16 14 -#define R_PPC_GOT16_LO 15 -#define R_PPC_GOT16_HI 16 -#define R_PPC_GOT16_HA 17 -#define R_PPC_PLTREL24 18 -#define R_PPC_COPY 19 -#define R_PPC_GLOB_DAT 20 -#define R_PPC_JMP_SLOT 21 -#define R_PPC_RELATIVE 22 -#define R_PPC_LOCAL24PC 23 -#define R_PPC_UADDR32 24 -#define R_PPC_UADDR16 25 -#define R_PPC_REL32 26 -#define R_PPC_PLT32 27 -#define R_PPC_PLTREL32 28 -#define R_PPC_PLT16_LO 29 -#define R_PPC_PLT16_HI 30 -#define R_PPC_PLT16_HA 31 -#define R_PPC_SDAREL16 32 -#define R_PPC_SECTOFF 33 -#define R_PPC_SECTOFF_LO 34 -#define R_PPC_SECTOFF_HI 35 -#define R_PPC_SECTOFF_HA 36 - -/* PowerPC relocations defined for the TLS access ABI. */ -#define R_PPC_TLS 67 /* none (sym+add)@tls */ -#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */ -#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */ -#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */ -#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */ -#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */ -#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */ -#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */ -#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */ -#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */ -#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */ -#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */ - -/* keep this the last entry. */ -#define R_PPC_NUM 95 - -/* - * ELF register definitions.. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define ELF_NGREG 48 /* includes nip, msr, lr, etc. */ -#define ELF_NFPREG 33 /* includes fpscr */ - -typedef unsigned long elf_greg_t64; -typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG]; - -typedef unsigned int elf_greg_t32; -typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG]; -typedef elf_gregset_t32 compat_elf_gregset_t; - -/* - * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps. - */ -#ifdef __powerpc64__ -# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ -# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ -# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ -# define ELF_GREG_TYPE elf_greg_t64 -#else -# define ELF_NEVRREG 34 /* includes acc (as 2) */ -# define ELF_NVRREG 33 /* includes vscr */ -# define ELF_GREG_TYPE elf_greg_t32 -# define ELF_ARCH EM_PPC -# define ELF_CLASS ELFCLASS32 -# define ELF_DATA ELFDATA2MSB -#endif /* __powerpc64__ */ - -#ifndef ELF_ARCH -# define ELF_ARCH EM_PPC64 -# define ELF_CLASS ELFCLASS64 -# define ELF_DATA ELFDATA2MSB - typedef elf_greg_t64 elf_greg_t; - typedef elf_gregset_t64 elf_gregset_t; -#else - /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */ - typedef elf_greg_t32 elf_greg_t; - typedef elf_gregset_t32 elf_gregset_t; -#endif /* ELF_ARCH */ - -/* Floating point registers */ -typedef double elf_fpreg_t; -typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; - -/* Altivec registers */ -/* - * The entries with indexes 0-31 contain the corresponding vector registers. - * The entry with index 32 contains the vscr as the last word (offset 12) - * within the quadword. This allows the vscr to be stored as either a - * quadword (since it must be copied via a vector register to/from storage) - * or as a word. - * - * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first - * word (offset 0) within the quadword. - * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch - * (combined (32- and 64-bit) gdb. - * - * Note that it's _not_ compatible with 32 bits ucontext which stuffs the - * vrsave along with vscr and so only uses 33 vectors for the register set - */ -typedef __vector128 elf_vrreg_t; -typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; -#ifdef __powerpc64__ -typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; -typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; -#endif - -#ifdef __KERNEL__ -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) -#define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) - -#define USE_ELF_CORE_DUMP -#define CORE_DUMP_USE_REGSET -#define ELF_EXEC_PAGESIZE PAGE_SIZE - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (0x20000000) - -/* - * Our registers are always unsigned longs, whether we're a 32 bit - * process or 64 bit, on either a 64 bit or 32 bit kernel. - * - * This macro relies on elf_regs[i] having the right type to truncate to, - * either u32 or u64. It defines the body of the elf_core_copy_regs - * function, either the native one with elf_gregset_t elf_regs or - * the 32-bit one with elf_gregset_t32 elf_regs. - */ -#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \ - int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \ - (size_t)ELF_NGREG); \ - for (i = 0; i < nregs; i++) \ - elf_regs[i] = ((unsigned long *) regs)[i]; \ - memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0])) - -/* Common routine for both 32-bit and 64-bit native processes */ -static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, - struct pt_regs *regs) -{ - PPC_ELF_CORE_COPY_REGS(elf_regs, regs); -} -#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); - -typedef elf_vrregset_t elf_fpxregset_t; - -/* ELF_HWCAP yields a mask that user programs can use to figure out what - instruction set this cpu supports. This could be done in userspace, - but it's not easy, and we've already done it here. */ -# define ELF_HWCAP (cur_cpu_spec->cpu_user_features) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (cur_cpu_spec->platform) - -/* While ELF_PLATFORM indicates the ISA supported by the platform, it - * may not accurately reflect the underlying behavior of the hardware - * (as in the case of running in Power5+ compatibility mode on a - * Power6 machine). ELF_BASE_PLATFORM allows ld.so to load libraries - * that are tuned for the real hardware. - */ -#define ELF_BASE_PLATFORM (powerpc_base_platform) - -#ifdef __powerpc64__ -# define ELF_PLAT_INIT(_r, load_addr) do { \ - _r->gpr[2] = load_addr; \ -} while (0) -#endif /* __powerpc64__ */ - -#ifdef __powerpc64__ -# define SET_PERSONALITY(ex, ibcs2) \ -do { \ - unsigned long new_flags = 0; \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - new_flags = _TIF_32BIT; \ - if ((current_thread_info()->flags & _TIF_32BIT) \ - != new_flags) \ - set_thread_flag(TIF_ABI_PENDING); \ - else \ - clear_thread_flag(TIF_ABI_PENDING); \ - if (personality(current->personality) != PER_LINUX32) \ - set_personality(PER_LINUX | \ - (current->personality & (~PER_MASK))); \ -} while (0) -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. This - * is only required to work around bugs in old 32bit toolchains. Since - * the 64bit ABI has never had these issues dont enable the workaround - * even if we have an executable stack. - */ -# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ - (exec_stk != EXSTACK_DISABLE_X) : 0) -#else -# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) -#endif /* __powerpc64__ */ - -extern int dcache_bsize; -extern int icache_bsize; -extern int ucache_bsize; - -/* vDSO has arch_setup_additional_pages */ -#define ARCH_HAS_SETUP_ADDITIONAL_PAGES -struct linux_binprm; -extern int arch_setup_additional_pages(struct linux_binprm *bprm, - int executable_stack); -#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); - -#endif /* __KERNEL__ */ - -/* - * The requirements here are: - * - keep the final alignment of sp (sp & 0xf) - * - make sure the 32-bit value at the first 16 byte aligned position of - * AUXV is greater than 16 for glibc compatibility. - * AT_IGNOREPPC is used for that. - * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, - * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. - * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes - */ -#define ARCH_DLINFO \ -do { \ - /* Handle glibc compatibility. */ \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ - /* Cache size items */ \ - NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ - NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ - NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ - VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base) \ -} while (0) - -/* PowerPC64 relocations defined by the ABIs */ -#define R_PPC64_NONE R_PPC_NONE -#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address. */ -#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned. */ -#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address. */ -#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address. */ -#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */ -#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */ -#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned. */ -#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN -#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN -#define R_PPC64_REL24 R_PPC_REL24 /* PC relative 26 bit, word aligned. */ -#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit. */ -#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN -#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN -#define R_PPC64_GOT16 R_PPC_GOT16 -#define R_PPC64_GOT16_LO R_PPC_GOT16_LO -#define R_PPC64_GOT16_HI R_PPC_GOT16_HI -#define R_PPC64_GOT16_HA R_PPC_GOT16_HA - -#define R_PPC64_COPY R_PPC_COPY -#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT -#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT -#define R_PPC64_RELATIVE R_PPC_RELATIVE - -#define R_PPC64_UADDR32 R_PPC_UADDR32 -#define R_PPC64_UADDR16 R_PPC_UADDR16 -#define R_PPC64_REL32 R_PPC_REL32 -#define R_PPC64_PLT32 R_PPC_PLT32 -#define R_PPC64_PLTREL32 R_PPC_PLTREL32 -#define R_PPC64_PLT16_LO R_PPC_PLT16_LO -#define R_PPC64_PLT16_HI R_PPC_PLT16_HI -#define R_PPC64_PLT16_HA R_PPC_PLT16_HA - -#define R_PPC64_SECTOFF R_PPC_SECTOFF -#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO -#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI -#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA -#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2. */ -#define R_PPC64_ADDR64 38 /* doubleword64 S + A. */ -#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A). */ -#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A). */ -#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A). */ -#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A). */ -#define R_PPC64_UADDR64 43 /* doubleword64 S + A. */ -#define R_PPC64_REL64 44 /* doubleword64 S + A - P. */ -#define R_PPC64_PLT64 45 /* doubleword64 L + A. */ -#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P. */ -#define R_PPC64_TOC16 47 /* half16* S + A - .TOC. */ -#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.). */ -#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.). */ -#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.). */ -#define R_PPC64_TOC 51 /* doubleword64 .TOC. */ -#define R_PPC64_PLTGOT16 52 /* half16* M + A. */ -#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A). */ -#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A). */ -#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A). */ - -#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2. */ -#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2. */ -#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2. */ -#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2. */ -#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2. */ -#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2. */ -#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2. */ -#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2. */ -#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2. */ -#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2. */ -#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2. */ - -/* PowerPC64 relocations defined for the TLS access ABI. */ -#define R_PPC64_TLS 67 /* none (sym+add)@tls */ -#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */ -#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */ -#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */ -#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */ -#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */ -#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */ -#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */ -#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */ -#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */ -#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */ -#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */ -#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */ -#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */ -#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */ -#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */ -#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */ -#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */ -#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */ -#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */ -#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */ -#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */ -#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */ -#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */ -#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */ -#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */ -#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */ -#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */ -#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */ -#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */ -#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */ -#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */ -#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */ -#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */ -#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */ -#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */ -#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */ -#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */ -#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */ -#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */ - -/* Keep this the last entry. */ -#define R_PPC64_NUM 107 - -#ifdef __KERNEL__ - -#ifdef CONFIG_SPU_BASE -/* Notes used in ET_CORE. Note name is "SPU//". */ -#define NT_SPU 1 - -#define ARCH_HAVE_EXTRA_ELF_NOTES - -#endif /* CONFIG_SPU_BASE */ - -#endif /* __KERNEL */ - -#endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/emergency-restart.h b/include/asm-powerpc/emergency-restart.h deleted file mode 100644 index 3711bd9d50bd..000000000000 --- a/include/asm-powerpc/emergency-restart.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/errno.h b/include/asm-powerpc/errno.h deleted file mode 100644 index 8c145fd17d86..000000000000 --- a/include/asm-powerpc/errno.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_POWERPC_ERRNO_H -#define _ASM_POWERPC_ERRNO_H - -#include - -#undef EDEADLOCK -#define EDEADLOCK 58 /* File locking deadlock error */ - -#define _LAST_ERRNO 516 - -#endif /* _ASM_POWERPC_ERRNO_H */ diff --git a/include/asm-powerpc/exception.h b/include/asm-powerpc/exception.h deleted file mode 100644 index 329148b5acc6..000000000000 --- a/include/asm-powerpc/exception.h +++ /dev/null @@ -1,311 +0,0 @@ -#ifndef _ASM_POWERPC_EXCEPTION_H -#define _ASM_POWERPC_EXCEPTION_H -/* - * Extracted from head_64.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -/* - * We're short on space and time in the exception prolog, so we can't - * use the normal SET_REG_IMMEDIATE macro. Normally we just need the - * low halfword of the address, but for Kdump we need the whole low - * word. - */ -#ifdef CONFIG_CRASH_DUMP -#define LOAD_HANDLER(reg, label) \ - oris reg,reg,(label)@h; /* virt addr of handler ... */ \ - ori reg,reg,(label)@l; /* .. and the rest */ -#else -#define LOAD_HANDLER(reg, label) \ - ori reg,reg,(label)@l; /* virt addr of handler ... */ -#endif - -#define EXCEPTION_PROLOG_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -/* - * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. - * The firmware calls the registered system_reset_fwnmi and - * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run - * a 32bit application at the time of the event. - * This firmware bug is present on POWER4 and JS20. - */ -#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ - EXCEPTION_PROLOG_1(area); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - /* force 64bit mode */ \ - li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ - rldimi r10,r11,61,0; /* insert into top 3 bits */ \ - /* done 64bit mode */ \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - EXCEPTION_PROLOG_1(area); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,2f; /* abort if it is */ \ - b 3f; \ -2: li r1,(n); /* will be reloaded later */ \ - sth r1,PACA_TRAP_SAVE(r13); \ - b bad_stack; \ -3: std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - ACCOUNT_CPU_USER_ENTRY(r9, r10); \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r10,SOFTE(r1); \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define HSTD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r20; /* save r20 */ \ - mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR0,r20; \ - mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \ - mtspr SPRN_SRR1,r20; \ - mfspr r20,SPRN_SPRG1; /* restore r20 */ \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - - -#define MASKABLE_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ - std r10,PACA_EXGEN+EX_R10(r13); \ - lbz r10,PACASOFTIRQEN(r13); \ - mfcr r9; \ - cmpwi r10,0; \ - beq masked_interrupt; \ - mfspr r10,SPRN_SPRG1; \ - std r10,PACA_EXGEN+EX_R13(r13); \ - std r11,PACA_EXGEN+EX_R11(r13); \ - std r12,PACA_EXGEN+EX_R12(r13); \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - LOAD_HANDLER(r12,label##_common) \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ - TRACE_DISABLE_INTS; \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13); \ - TRACE_DISABLE_INTS -#endif /* CONFIG_PPC_ISERIES */ - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -/* - * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. - */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ -BEGIN_FTR_SECTION \ - bl .ppc64_runlatch_on; \ -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * When the idle code in power4_idle puts the CPU into NAP mode, - * it has to do so in a loop, and relies on the external interrupt - * and decrementer interrupt entry code to get it out of the loop. - * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags - * to signal that it is in the loop and needs help to get out. - */ -#ifdef CONFIG_PPC_970_NAP -#define FINISH_NAP \ -BEGIN_FTR_SECTION \ - clrrdi r11,r1,THREAD_SHIFT; \ - ld r9,TI_LOCAL_FLAGS(r11); \ - andi. r10,r9,_TLF_NAPPING; \ - bnel power4_fixup_nap; \ -END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) -#else -#define FINISH_NAP -#endif - -#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/include/asm-powerpc/fb.h b/include/asm-powerpc/fb.h deleted file mode 100644 index 411af8d17a69..000000000000 --- a/include/asm-powerpc/fb.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ - -#include -#include -#include - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-powerpc/fcntl.h b/include/asm-powerpc/fcntl.h deleted file mode 100644 index ce5c4516d404..000000000000 --- a/include/asm-powerpc/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_FCNTL_H -#define _ASM_FCNTL_H - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_LARGEFILE 0200000 -#define O_DIRECT 0400000 /* direct disk access hint */ - -#include - -#endif /* _ASM_FCNTL_H */ diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h deleted file mode 100644 index a1029967620b..000000000000 --- a/include/asm-powerpc/feature-fixups.h +++ /dev/null @@ -1,126 +0,0 @@ -#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H -#define __ASM_POWERPC_FEATURE_FIXUPS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __ASSEMBLY__ - -/* - * Feature section common macros - * - * Note that the entries now contain offsets between the table entry - * and the code rather than absolute code pointers in order to be - * useable with the vdso shared library. There is also an assumption - * that values will be negative, that is, the fixup table has to be - * located after the code it fixes up. - */ -#if defined(CONFIG_PPC64) && !defined(__powerpc64__) -/* 64 bits kernel, 32 bits code (ie. vdso32) */ -#define FTR_ENTRY_LONG .llong -#define FTR_ENTRY_OFFSET .long 0xffffffff; .long -#else -/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ -#define FTR_ENTRY_LONG PPC_LONG -#define FTR_ENTRY_OFFSET PPC_LONG -#endif - -#define START_FTR_SECTION(label) label##1: - -#define FTR_SECTION_ELSE_NESTED(label) \ -label##2: \ - .pushsection __ftr_alt_##label,"a"; \ - .align 2; \ -label##3: - -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -label##4: \ - .popsection; \ - .pushsection sect,"a"; \ - .align 3; \ -label##5: \ - FTR_ENTRY_LONG msk; \ - FTR_ENTRY_LONG val; \ - FTR_ENTRY_OFFSET label##1b-label##5b; \ - FTR_ENTRY_OFFSET label##2b-label##5b; \ - FTR_ENTRY_OFFSET label##3b-label##5b; \ - FTR_ENTRY_OFFSET label##4b-label##5b; \ - .popsection; - - -/* CPU feature dependent sections */ -#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) -#define BEGIN_FTR_SECTION START_FTR_SECTION(97) - -#define END_FTR_SECTION_NESTED(msk, val, label) \ - FTR_SECTION_ELSE_NESTED(label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) - -#define END_FTR_SECTION(msk, val) \ - END_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) -#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) - -/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ -#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) -#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) -#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ - ALT_FTR_SECTION_END_NESTED(msk, msk, label) -#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ - ALT_FTR_SECTION_END_NESTED(msk, 0, label) -#define ALT_FTR_SECTION_END(msk, val) \ - ALT_FTR_SECTION_END_NESTED(msk, val, 97) -#define ALT_FTR_SECTION_END_IFSET(msk) \ - ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) -#define ALT_FTR_SECTION_END_IFCLR(msk) \ - ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) - -/* Firmware feature dependent sections */ -#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) -#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) - -#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ - FTR_SECTION_ELSE_NESTED(label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) - -#define END_FW_FTR_SECTION(msk, val) \ - END_FW_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) -#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) - -/* Firmware feature sections with alternatives */ -#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) -#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) -#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) -#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) -#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) -#define ALT_FW_FTR_SECTION_END(msk, val) \ - ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) -#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ - ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) -#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ - ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) - -#endif /* __ASSEMBLY__ */ - -/* LWSYNC feature sections */ -#define START_LWSYNC_SECTION(label) label##1: -#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ -label##2: \ - .pushsection sect,"a"; \ - .align 2; \ -label##3: \ - .long label##1b-label##3b; \ - .popsection; - -#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h deleted file mode 100644 index 3a179827528d..000000000000 --- a/include/asm-powerpc/firmware.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Modifications for ppc64: - * Copyright (C) 2003 Dave Engebretsen - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_POWERPC_FIRMWARE_H -#define __ASM_POWERPC_FIRMWARE_H - -#ifdef __KERNEL__ - -#include -#include - -/* firmware feature bitmask values */ -#define FIRMWARE_MAX_FEATURES 63 - -#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) -#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) -#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) -#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) -#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) -#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) -#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) -#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) -#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) -#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) -#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) -#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) -#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) -#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) -#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) -#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) -#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) -#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000) -#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) -#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) -#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) -#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) -#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) -#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) -#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) -#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000) -#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000) - -#ifndef __ASSEMBLY__ - -enum { -#ifdef CONFIG_PPC64 - FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | - FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | - FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | - FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT | - FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ | - FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN | - FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE | - FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO, - FW_FEATURE_PSERIES_ALWAYS = 0, - FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, - FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, - FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT, - FW_FEATURE_CELLEB_ALWAYS = 0, - FW_FEATURE_NATIVE_POSSIBLE = 0, - FW_FEATURE_NATIVE_ALWAYS = 0, - FW_FEATURE_POSSIBLE = -#ifdef CONFIG_PPC_PSERIES - FW_FEATURE_PSERIES_POSSIBLE | -#endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_POSSIBLE | -#endif -#ifdef CONFIG_PPC_PS3 - FW_FEATURE_PS3_POSSIBLE | -#endif -#ifdef CONFIG_PPC_CELLEB - FW_FEATURE_CELLEB_POSSIBLE | -#endif -#ifdef CONFIG_PPC_NATIVE - FW_FEATURE_NATIVE_ALWAYS | -#endif - 0, - FW_FEATURE_ALWAYS = -#ifdef CONFIG_PPC_PSERIES - FW_FEATURE_PSERIES_ALWAYS & -#endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_ALWAYS & -#endif -#ifdef CONFIG_PPC_PS3 - FW_FEATURE_PS3_ALWAYS & -#endif -#ifdef CONFIG_PPC_CELLEB - FW_FEATURE_CELLEB_ALWAYS & -#endif -#ifdef CONFIG_PPC_NATIVE - FW_FEATURE_NATIVE_ALWAYS & -#endif - FW_FEATURE_POSSIBLE, - -#else /* CONFIG_PPC64 */ - FW_FEATURE_POSSIBLE = 0, - FW_FEATURE_ALWAYS = 0, -#endif -}; - -/* This is used to identify firmware features which are available - * to the kernel. - */ -extern unsigned long powerpc_firmware_features; - -#define firmware_has_feature(feature) \ - ((FW_FEATURE_ALWAYS & (feature)) || \ - (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature))) - -extern void system_reset_fwnmi(void); -extern void machine_check_fwnmi(void); - -/* This is true if we are using the firmware NMI handler (typically LPAR) */ -extern int fwnmi_active; - -extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/include/asm-powerpc/fixmap.h b/include/asm-powerpc/fixmap.h deleted file mode 100644 index 8428b38a3d30..000000000000 --- a/include/asm-powerpc/fixmap.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Copyright 2008 Freescale Semiconductor Inc. - * Port to powerpc added by Kumar Gala - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -extern unsigned long FIXADDR_TOP; - -#ifndef __ASSEMBLY__ -#include -#include -#ifdef CONFIG_HIGHMEM -#include -#include -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the end of virtual memory (0xfffff000) backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ -enum fixed_addresses { - FIX_HOLE, -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - /* FIX_PCIE_MCFG, */ - __end_of_fixed_addresses -}; - -extern void __set_fixmap (enum fixed_addresses idx, - phys_addr_t phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) - -#define clear_fixmap(idx) \ - __set_fixmap(idx, 0, __pgprot(0)) - -#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static __always_inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} - -#endif /* !__ASSEMBLY__ */ -#endif diff --git a/include/asm-powerpc/floppy.h b/include/asm-powerpc/floppy.h deleted file mode 100644 index 24bd34c57e9d..000000000000 --- a/include/asm-powerpc/floppy.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Architecture specific parts of the Floppy driver - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - */ -#ifndef __ASM_POWERPC_FLOPPY_H -#define __ASM_POWERPC_FLOPPY_H -#ifdef __KERNEL__ - -#include - -#define fd_inb(port) inb_p(port) -#define fd_outb(value,port) outb_p(value,port) - -#define fd_enable_dma() enable_dma(FLOPPY_DMA) -#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) -#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) -#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) -#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) -#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) -#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) -#define fd_enable_irq() enable_irq(FLOPPY_IRQ) -#define fd_disable_irq() disable_irq(FLOPPY_IRQ) -#define fd_cacheflush(addr,size) /* nothing */ -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); - -#include -#include /* for isa_bridge_pcidev */ - -#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) - -static int fd_request_dma(void); - -struct fd_dma_ops { - void (*_disable_dma)(unsigned int dmanr); - void (*_free_dma)(unsigned int dmanr); - int (*_get_dma_residue)(unsigned int dummy); - int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); -}; - -static int virtual_dma_count; -static int virtual_dma_residue; -static char *virtual_dma_addr; -static int virtual_dma_mode; -static int doing_vdma; -static struct fd_dma_ops *fd_ops; - -static irqreturn_t floppy_hardint(int irq, void *dev_id) -{ - unsigned char st; - int lcount; - char *lptr; - - if (!doing_vdma) - return floppy_interrupt(irq, dev_id); - - - st = 1; - for (lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if (st != 0xa0) - break; - if (virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - - if (st == 0x20) - return IRQ_HANDLED; - if (!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; - doing_vdma = 0; - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - return IRQ_HANDLED; -} - -static void vdma_disable_dma(unsigned int dummy) -{ - doing_vdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - -static void vdma_nop(unsigned int dummy) -{ -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static int fd_request_irq(void) -{ - if (can_use_virtual_dma) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); - else - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_vdma = 1; - virtual_dma_port = io; - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - -static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - static unsigned long prev_size; - static dma_addr_t bus_addr = 0; - static char *prev_addr; - static int prev_dir; - int dir; - - doing_vdma = 0; - dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; - - if (bus_addr - && (addr != prev_addr || size != prev_size || dir != prev_dir)) { - /* different from last time -- unmap prev */ - pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir); - bus_addr = 0; - } - - if (!bus_addr) /* need to map it */ - bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir); - - /* remember this one as prev */ - prev_addr = addr; - prev_size = size; - prev_dir = dir; - - fd_clear_dma_ff(); - fd_cacheflush(addr, size); - fd_set_dma_mode(mode); - set_dma_addr(FLOPPY_DMA, bus_addr); - fd_set_dma_count(size); - virtual_dma_port = io; - fd_enable_dma(); - - return 0; -} - -static struct fd_dma_ops real_dma_ops = -{ - ._disable_dma = disable_dma, - ._free_dma = free_dma, - ._get_dma_residue = get_dma_residue, - ._dma_setup = hard_dma_setup -}; - -static struct fd_dma_ops virt_dma_ops = -{ - ._disable_dma = vdma_disable_dma, - ._free_dma = vdma_nop, - ._get_dma_residue = vdma_get_dma_residue, - ._dma_setup = vdma_dma_setup -}; - -static int fd_request_dma(void) -{ - if (can_use_virtual_dma & 1) { - fd_ops = &virt_dma_ops; - return 0; - } - else { - fd_ops = &real_dma_ops; - return request_dma(FLOPPY_DMA, "floppy"); - } -} - -static int FDC1 = 0x3f0; -static int FDC2 = -1; - -/* - * Again, the CMOS information not available - */ -#define FLOPPY0_TYPE 6 -#define FLOPPY1_TYPE 0 - -#define N_FDC 2 /* Don't change this! */ -#define N_DRIVE 8 - -/* - * The PowerPC has no problems with floppy DMA crossing 64k borders. - */ -#define CROSS_64KB(a,s) (0) - -#define EXTRA_FLOPPY_PARAMS - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/include/asm-powerpc/fs_pd.h b/include/asm-powerpc/fs_pd.h deleted file mode 100644 index 9361cd5342cc..000000000000 --- a/include/asm-powerpc/fs_pd.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Platform information definitions. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef FS_PD_H -#define FS_PD_H -#include -#include - -#ifdef CONFIG_CPM2 -#include - -#if defined(CONFIG_8260) -#include -#endif - -#define cpm2_map(member) (&cpm2_immr->member) -#define cpm2_map_size(member, size) (&cpm2_immr->member) -#define cpm2_unmap(addr) do {} while(0) -#endif - -#ifdef CONFIG_8xx -#include -#include - -extern immap_t __iomem *mpc8xx_immr; - -#define immr_map(member) (&mpc8xx_immr->member) -#define immr_map_size(member, size) (&mpc8xx_immr->member) -#define immr_unmap(addr) do {} while (0) -#endif - -static inline int uart_baudrate(void) -{ - return get_baudrate(); -} - -static inline int uart_clock(void) -{ - return ppc_proc_freq; -} - -#endif diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h deleted file mode 100644 index 8e8c9b5032d3..000000000000 --- a/include/asm-powerpc/fsl_gtm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Freescale General-purpose Timers Module - * - * Copyright (c) Freescale Semicondutor, Inc. 2006. - * Shlomi Gridish - * Jerry Huang - * Copyright (c) MontaVista Software, Inc. 2008. - * Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASM_FSL_GTM_H -#define __ASM_FSL_GTM_H - -#include - -struct gtm; - -struct gtm_timer { - unsigned int irq; - - struct gtm *gtm; - bool requested; - u8 __iomem *gtcfr; - __be16 __iomem *gtmdr; - __be16 __iomem *gtpsr; - __be16 __iomem *gtcnr; - __be16 __iomem *gtrfr; - __be16 __iomem *gtevr; -}; - -extern struct gtm_timer *gtm_get_timer16(void); -extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, - unsigned int timer); -extern void gtm_put_timer16(struct gtm_timer *tmr); -extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, - bool reload); -extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, - bool reload); -extern void gtm_stop_timer16(struct gtm_timer *tmr); -extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); - -#endif /* __ASM_FSL_GTM_H */ diff --git a/include/asm-powerpc/fsl_lbc.h b/include/asm-powerpc/fsl_lbc.h deleted file mode 100644 index 303f5484c050..000000000000 --- a/include/asm-powerpc/fsl_lbc.h +++ /dev/null @@ -1,311 +0,0 @@ -/* Freescale Local Bus Controller - * - * Copyright (c) 2006-2007 Freescale Semiconductor - * - * Authors: Nick Spence , - * Scott Wood - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_FSL_LBC_H -#define __ASM_FSL_LBC_H - -#include -#include -#include - -struct fsl_lbc_bank { - __be32 br; /**< Base Register */ -#define BR_BA 0xFFFF8000 -#define BR_BA_SHIFT 15 -#define BR_PS 0x00001800 -#define BR_PS_SHIFT 11 -#define BR_PS_8 0x00000800 /* Port Size 8 bit */ -#define BR_PS_16 0x00001000 /* Port Size 16 bit */ -#define BR_PS_32 0x00001800 /* Port Size 32 bit */ -#define BR_DECC 0x00000600 -#define BR_DECC_SHIFT 9 -#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ -#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ -#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ -#define BR_WP 0x00000100 -#define BR_WP_SHIFT 8 -#define BR_MSEL 0x000000E0 -#define BR_MSEL_SHIFT 5 -#define BR_MS_GPCM 0x00000000 /* GPCM */ -#define BR_MS_FCM 0x00000020 /* FCM */ -#define BR_MS_SDRAM 0x00000060 /* SDRAM */ -#define BR_MS_UPMA 0x00000080 /* UPMA */ -#define BR_MS_UPMB 0x000000A0 /* UPMB */ -#define BR_MS_UPMC 0x000000C0 /* UPMC */ -#define BR_V 0x00000001 -#define BR_V_SHIFT 0 -#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) - - __be32 or; /**< Base Register */ -#define OR0 0x5004 -#define OR1 0x500C -#define OR2 0x5014 -#define OR3 0x501C -#define OR4 0x5024 -#define OR5 0x502C -#define OR6 0x5034 -#define OR7 0x503C - -#define OR_FCM_AM 0xFFFF8000 -#define OR_FCM_AM_SHIFT 15 -#define OR_FCM_BCTLD 0x00001000 -#define OR_FCM_BCTLD_SHIFT 12 -#define OR_FCM_PGS 0x00000400 -#define OR_FCM_PGS_SHIFT 10 -#define OR_FCM_CSCT 0x00000200 -#define OR_FCM_CSCT_SHIFT 9 -#define OR_FCM_CST 0x00000100 -#define OR_FCM_CST_SHIFT 8 -#define OR_FCM_CHT 0x00000080 -#define OR_FCM_CHT_SHIFT 7 -#define OR_FCM_SCY 0x00000070 -#define OR_FCM_SCY_SHIFT 4 -#define OR_FCM_SCY_1 0x00000010 -#define OR_FCM_SCY_2 0x00000020 -#define OR_FCM_SCY_3 0x00000030 -#define OR_FCM_SCY_4 0x00000040 -#define OR_FCM_SCY_5 0x00000050 -#define OR_FCM_SCY_6 0x00000060 -#define OR_FCM_SCY_7 0x00000070 -#define OR_FCM_RST 0x00000008 -#define OR_FCM_RST_SHIFT 3 -#define OR_FCM_TRLX 0x00000004 -#define OR_FCM_TRLX_SHIFT 2 -#define OR_FCM_EHTR 0x00000002 -#define OR_FCM_EHTR_SHIFT 1 -}; - -struct fsl_lbc_regs { - struct fsl_lbc_bank bank[8]; - u8 res0[0x28]; - __be32 mar; /**< UPM Address Register */ - u8 res1[0x4]; - __be32 mamr; /**< UPMA Mode Register */ -#define MxMR_OP_NO (0 << 28) /**< normal operation */ -#define MxMR_OP_WA (1 << 28) /**< write array */ -#define MxMR_OP_RA (2 << 28) /**< read array */ -#define MxMR_OP_RP (3 << 28) /**< run pattern */ -#define MxMR_MAD 0x3f /**< machine address */ - __be32 mbmr; /**< UPMB Mode Register */ - __be32 mcmr; /**< UPMC Mode Register */ - u8 res2[0x8]; - __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ - __be32 mdr; /**< UPM Data Register */ - u8 res3[0x4]; - __be32 lsor; /**< Special Operation Initiation Register */ - __be32 lsdmr; /**< SDRAM Mode Register */ - u8 res4[0x8]; - __be32 lurt; /**< UPM Refresh Timer */ - __be32 lsrt; /**< SDRAM Refresh Timer */ - u8 res5[0x8]; - __be32 ltesr; /**< Transfer Error Status Register */ -#define LTESR_BM 0x80000000 -#define LTESR_FCT 0x40000000 -#define LTESR_PAR 0x20000000 -#define LTESR_WP 0x04000000 -#define LTESR_ATMW 0x00800000 -#define LTESR_ATMR 0x00400000 -#define LTESR_CS 0x00080000 -#define LTESR_CC 0x00000001 -#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) - __be32 ltedr; /**< Transfer Error Disable Register */ - __be32 lteir; /**< Transfer Error Interrupt Register */ - __be32 lteatr; /**< Transfer Error Attributes Register */ - __be32 ltear; /**< Transfer Error Address Register */ - u8 res6[0xC]; - __be32 lbcr; /**< Configuration Register */ -#define LBCR_LDIS 0x80000000 -#define LBCR_LDIS_SHIFT 31 -#define LBCR_BCTLC 0x00C00000 -#define LBCR_BCTLC_SHIFT 22 -#define LBCR_AHD 0x00200000 -#define LBCR_LPBSE 0x00020000 -#define LBCR_LPBSE_SHIFT 17 -#define LBCR_EPAR 0x00010000 -#define LBCR_EPAR_SHIFT 16 -#define LBCR_BMT 0x0000FF00 -#define LBCR_BMT_SHIFT 8 -#define LBCR_INIT 0x00040000 - __be32 lcrr; /**< Clock Ratio Register */ -#define LCRR_DBYP 0x80000000 -#define LCRR_DBYP_SHIFT 31 -#define LCRR_BUFCMDC 0x30000000 -#define LCRR_BUFCMDC_SHIFT 28 -#define LCRR_ECL 0x03000000 -#define LCRR_ECL_SHIFT 24 -#define LCRR_EADC 0x00030000 -#define LCRR_EADC_SHIFT 16 -#define LCRR_CLKDIV 0x0000000F -#define LCRR_CLKDIV_SHIFT 0 - u8 res7[0x8]; - __be32 fmr; /**< Flash Mode Register */ -#define FMR_CWTO 0x0000F000 -#define FMR_CWTO_SHIFT 12 -#define FMR_BOOT 0x00000800 -#define FMR_ECCM 0x00000100 -#define FMR_AL 0x00000030 -#define FMR_AL_SHIFT 4 -#define FMR_OP 0x00000003 -#define FMR_OP_SHIFT 0 - __be32 fir; /**< Flash Instruction Register */ -#define FIR_OP0 0xF0000000 -#define FIR_OP0_SHIFT 28 -#define FIR_OP1 0x0F000000 -#define FIR_OP1_SHIFT 24 -#define FIR_OP2 0x00F00000 -#define FIR_OP2_SHIFT 20 -#define FIR_OP3 0x000F0000 -#define FIR_OP3_SHIFT 16 -#define FIR_OP4 0x0000F000 -#define FIR_OP4_SHIFT 12 -#define FIR_OP5 0x00000F00 -#define FIR_OP5_SHIFT 8 -#define FIR_OP6 0x000000F0 -#define FIR_OP6_SHIFT 4 -#define FIR_OP7 0x0000000F -#define FIR_OP7_SHIFT 0 -#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ -#define FIR_OP_CA 0x1 /* Issue current column address */ -#define FIR_OP_PA 0x2 /* Issue current block+page address */ -#define FIR_OP_UA 0x3 /* Issue user defined address */ -#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ -#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ -#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ -#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ -#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ -#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ -#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ -#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ -#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ -#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ -#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ -#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ - __be32 fcr; /**< Flash Command Register */ -#define FCR_CMD0 0xFF000000 -#define FCR_CMD0_SHIFT 24 -#define FCR_CMD1 0x00FF0000 -#define FCR_CMD1_SHIFT 16 -#define FCR_CMD2 0x0000FF00 -#define FCR_CMD2_SHIFT 8 -#define FCR_CMD3 0x000000FF -#define FCR_CMD3_SHIFT 0 - __be32 fbar; /**< Flash Block Address Register */ -#define FBAR_BLK 0x00FFFFFF - __be32 fpar; /**< Flash Page Address Register */ -#define FPAR_SP_PI 0x00007C00 -#define FPAR_SP_PI_SHIFT 10 -#define FPAR_SP_MS 0x00000200 -#define FPAR_SP_CI 0x000001FF -#define FPAR_SP_CI_SHIFT 0 -#define FPAR_LP_PI 0x0003F000 -#define FPAR_LP_PI_SHIFT 12 -#define FPAR_LP_MS 0x00000800 -#define FPAR_LP_CI 0x000007FF -#define FPAR_LP_CI_SHIFT 0 - __be32 fbcr; /**< Flash Byte Count Register */ -#define FBCR_BC 0x00000FFF - u8 res11[0x8]; - u8 res8[0xF00]; -}; - -extern struct fsl_lbc_regs __iomem *fsl_lbc_regs; -extern spinlock_t fsl_lbc_lock; - -/* - * FSL UPM routines - */ -struct fsl_upm { - __be32 __iomem *mxmr; - int width; -}; - -extern int fsl_lbc_find(phys_addr_t addr_base); -extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); - -/** - * fsl_upm_start_pattern - start UPM patterns execution - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * @pat_offset: UPM pattern offset for the command to be executed - * - * This routine programmes UPM so the next memory access that hits an UPM - * will trigger pattern execution, starting at pat_offset. - */ -static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) -{ - clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); -} - -/** - * fsl_upm_end_pattern - end UPM patterns execution - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * - * This routine reverts UPM to normal operation mode. - */ -static inline void fsl_upm_end_pattern(struct fsl_upm *upm) -{ - clrbits32(upm->mxmr, MxMR_OP_RP); - - while (in_be32(upm->mxmr) & MxMR_OP_RP) - cpu_relax(); -} - -/** - * fsl_upm_run_pattern - actually run an UPM pattern - * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find - * @io_base: remapped pointer to where memory access should happen - * @mar: MAR register content during pattern execution - * - * This function triggers dummy write to the memory specified by the io_base, - * thus UPM pattern actually executed. Note that mar usage depends on the - * pre-programmed AMX bits in the UPM RAM. - */ -static inline int fsl_upm_run_pattern(struct fsl_upm *upm, - void __iomem *io_base, u32 mar) -{ - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&fsl_lbc_lock, flags); - - out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width)); - - switch (upm->width) { - case 8: - out_8(io_base, 0x0); - break; - case 16: - out_be16(io_base, 0x0); - break; - case 32: - out_be32(io_base, 0x0); - break; - default: - ret = -EINVAL; - break; - } - - spin_unlock_irqrestore(&fsl_lbc_lock, flags); - - return ret; -} - -#endif /* __ASM_FSL_LBC_H */ diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h deleted file mode 100644 index de921326cca8..000000000000 --- a/include/asm-powerpc/ftrace.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_POWERPC_FTRACE -#define _ASM_POWERPC_FTRACE - -#ifdef CONFIG_FTRACE -#define MCOUNT_ADDR ((long)(_mcount)) -#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ - -#ifndef __ASSEMBLY__ -extern void _mcount(void); -#endif - -#endif - -#endif /* _ASM_POWERPC_FTRACE */ diff --git a/include/asm-powerpc/futex.h b/include/asm-powerpc/futex.h deleted file mode 100644 index 6d406c5c5de4..000000000000 --- a/include/asm-powerpc/futex.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_FUTEX_H -#define _ASM_POWERPC_FUTEX_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ - __asm__ __volatile ( \ - LWSYNC_ON_SMP \ -"1: lwarx %0,0,%2\n" \ - insn \ - PPC405_ERR77(0, %2) \ -"2: stwcx. %1,0,%2\n" \ - "bne- 1b\n" \ - "li %1,0\n" \ -"3: .section .fixup,\"ax\"\n" \ -"4: li %1,%3\n" \ - "b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - ".align 3\n" \ - PPC_LONG "1b,4b,2b,4b\n" \ - ".previous" \ - : "=&r" (oldval), "=&r" (ret) \ - : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \ - : "cr0", "memory") - -static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr) -{ - int op = (encoded_op >> 28) & 7; - int cmp = (encoded_op >> 24) & 15; - int oparg = (encoded_op << 8) >> 20; - int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; - if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) - oparg = 1 << oparg; - - if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - __futex_atomic_op("", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ADD: - __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_OR: - __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_ANDN: - __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - case FUTEX_OP_XOR: - __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg); - break; - default: - ret = -ENOSYS; - } - - pagefault_enable(); - - if (!ret) { - switch (cmp) { - case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; - case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; - case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; - case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; - case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; - case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; - default: ret = -ENOSYS; - } - } - return ret; -} - -static inline int -futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) -{ - int prev; - - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\ - cmpw 0,%0,%3\n\ - bne- 3f\n" - PPC405_ERR77(0,%2) -"2: stwcx. %4,0,%2\n\ - bne- 1b\n" - ISYNC_ON_SMP -"3: .section .fixup,\"ax\"\n\ -4: li %0,%5\n\ - b 3b\n\ - .previous\n\ - .section __ex_table,\"a\"\n\ - .align 3\n\ - " PPC_LONG "1b,4b,2b,4b\n\ - .previous" \ - : "=&r" (prev), "+m" (*uaddr) - : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT) - : "cc", "memory"); - - return prev; -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/include/asm-powerpc/gpio.h b/include/asm-powerpc/gpio.h deleted file mode 100644 index ea04632399d8..000000000000 --- a/include/asm-powerpc/gpio.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Generic GPIO API implementation for PowerPC. - * - * Copyright (c) 2007-2008 MontaVista Software, Inc. - * - * Author: Anton Vorontsov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __ASM_POWERPC_GPIO_H -#define __ASM_POWERPC_GPIO_H - -#include -#include - -#ifdef CONFIG_GPIOLIB - -/* - * We don't (yet) implement inlined/rapid versions for on-chip gpios. - * Just call gpiolib. - */ -static inline int gpio_get_value(unsigned int gpio) -{ - return __gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned int gpio, int value) -{ - __gpio_set_value(gpio, value); -} - -static inline int gpio_cansleep(unsigned int gpio) -{ - return __gpio_cansleep(gpio); -} - -/* - * Not implemented, yet. - */ -static inline int gpio_to_irq(unsigned int gpio) -{ - return -ENOSYS; -} - -static inline int irq_to_gpio(unsigned int irq) -{ - return -EINVAL; -} - -#endif /* CONFIG_GPIOLIB */ - -#endif /* __ASM_POWERPC_GPIO_H */ diff --git a/include/asm-powerpc/grackle.h b/include/asm-powerpc/grackle.h deleted file mode 100644 index bd7812a519d4..000000000000 --- a/include/asm-powerpc/grackle.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_POWERPC_GRACKLE_H -#define _ASM_POWERPC_GRACKLE_H -#ifdef __KERNEL__ -/* - * Functions for setting up and using a MPC106 northbridge - */ - -#include - -extern void setup_grackle(struct pci_controller *hose); -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_GRACKLE_H */ diff --git a/include/asm-powerpc/hardirq.h b/include/asm-powerpc/hardirq.h deleted file mode 100644 index 288e14d53b7f..000000000000 --- a/include/asm-powerpc/hardirq.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _ASM_POWERPC_HARDIRQ_H -#define _ASM_POWERPC_HARDIRQ_H -#ifdef __KERNEL__ - -#include -#include - -/* The __last_jiffy_stamp field is needed to ensure that no decrementer - * interrupt is lost on SMP machines. Since on most CPUs it is in the same - * cache line as local_irq_count, it is cheap to access and is also used on UP - * for uniformity. - */ -typedef struct { - unsigned int __softirq_pending; /* set_bit is used on this */ - unsigned int __last_jiffy_stamp; -} ____cacheline_aligned irq_cpustat_t; - -#include /* Standard mappings for irq_cpustat_t above */ - -#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp) - -static inline void ack_bad_irq(int irq) -{ - printk(KERN_CRIT "illegal vector %d received!\n", irq); - BUG(); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h deleted file mode 100644 index 93f54958a9d1..000000000000 --- a/include/asm-powerpc/heathrow.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _ASM_POWERPC_HEATHROW_H -#define _ASM_POWERPC_HEATHROW_H -#ifdef __KERNEL__ -/* - * heathrow.h: definitions for using the "Heathrow" I/O controller chip. - * - * Grabbed from Open Firmware definitions on a PowerBook G3 Series - * - * Copyright (C) 1997 Paul Mackerras. - */ - -/* Front light color on Yikes/B&W G3. 32 bits */ -#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ - -/* Brightness/contrast (gossamer iMac ?). 8 bits */ -#define HEATHROW_BRIGHTNESS_CNTL 0x32 -#define HEATHROW_CONTRAST_CNTL 0x33 - -/* offset from ohare base for feature control register */ -#define HEATHROW_MBCR 0x34 /* Media bay control */ -#define HEATHROW_FCR 0x38 /* Feature control */ -#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ - -/* - * Bits in feature control register. - * Bits postfixed with a _N are in inverse logic - */ -#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ -#define HRW_BAY_POWER_N 0x00000002 -#define HRW_BAY_PCI_ENABLE 0x00000004 -#define HRW_BAY_IDE_ENABLE 0x00000008 -#define HRW_BAY_FLOPPY_ENABLE 0x00000010 -#define HRW_IDE0_ENABLE 0x00000020 -#define HRW_IDE0_RESET_N 0x00000040 -#define HRW_BAY_DEV_MASK 0x0000001c -#define HRW_BAY_RESET_N 0x00000080 -#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ -#define HRW_SCC_ENABLE 0x00000200 -#define HRW_MESH_ENABLE 0x00000400 -#define HRW_SWIM_ENABLE 0x00000800 -#define HRW_SOUND_POWER_N 0x00001000 -#define HRW_SOUND_CLK_ENABLE 0x00002000 -#define HRW_SCCA_IO 0x00004000 -#define HRW_SCCB_IO 0x00008000 -#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ -#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ -#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ -#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ -#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ -#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ -#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ -#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ -#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ -#define HRW_RESET_SCC 0x02000000 -#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ -#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ -#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ -#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ - -/* We OR those features at boot on desktop G3s */ -#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) - -/* Looks like Heathrow has some sort of GPIOs as well... */ -#define HRW_GPIO_MODEM_RESET 0x6d - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HEATHROW_H */ diff --git a/include/asm-powerpc/highmem.h b/include/asm-powerpc/highmem.h deleted file mode 100644 index 5d99b6489d56..000000000000 --- a/include/asm-powerpc/highmem.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * highmem.h: virtual kernel memory mappings for high memory - * - * PowerPC version, stolen from the i386 version. - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * - * - * Redesigned the x86 32-bit VM architecture to deal with - * up to 16 Terrabyte physical memory. With current x86 CPUs - * we now support up to 64 Gigabytes physical RAM. - * - * Copyright (C) 1999 Ingo Molnar - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define LAST_PKMAP (1 << PTE_SHIFT) -#define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline void *kmap(struct page *page) -{ - might_sleep(); - if (!PageHighMem(page)) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot) -{ - unsigned int idx; - unsigned long vaddr; - - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); -#ifdef CONFIG_DEBUG_HIGHMEM - BUG_ON(!pte_none(*(kmap_pte-idx))); -#endif - set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); - flush_tlb_page(NULL, vaddr); - - return (void*) vaddr; -} - -static inline void *kmap_atomic(struct page *page, enum km_type type) -{ - return kmap_atomic_prot(page, type, kmap_prot); -} - -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ -#ifdef CONFIG_DEBUG_HIGHMEM - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id(); - - if (vaddr < __fix_to_virt(FIX_KMAP_END)) { - pagefault_enable(); - return; - } - - BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(&init_mm, vaddr, kmap_pte-idx); - flush_tlb_page(NULL, vaddr); -#endif - pagefault_enable(); -} - -static inline struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long) ptr; - pte_t *pte; - - if (vaddr < FIXADDR_START) - return virt_to_page(ptr); - - idx = virt_to_fix(vaddr); - pte = kmap_pte - (idx - FIX_KMAP_BEGIN); - return pte_page(*pte); -} - -#define flush_cache_kmaps() flush_cache_all() - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h deleted file mode 100644 index 26f0d0ab27a5..000000000000 --- a/include/asm-powerpc/hugetlb.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_HUGETLB_H -#define _ASM_POWERPC_HUGETLB_H - -#include - - -int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, - unsigned long len); - -void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, - unsigned long end, unsigned long floor, - unsigned long ceiling); - -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - -/* - * If the arch doesn't supply something else, assume that hugepage - * size aligned regions are ok without further preparation. - */ -static inline int prepare_hugepage_range(struct file *file, - unsigned long addr, unsigned long len) -{ - struct hstate *h = hstate_file(file); - if (len & ~huge_page_mask(h)) - return -EINVAL; - if (addr & ~huge_page_mask(h)) - return -EINVAL; - return 0; -} - -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) -{ -} - -static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep) -{ -} - -static inline int huge_pte_none(pte_t pte) -{ - return pte_none(pte); -} - -static inline pte_t huge_pte_wrprotect(pte_t pte) -{ - return pte_wrprotect(pte); -} - -static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, - unsigned long addr, pte_t *ptep, - pte_t pte, int dirty) -{ - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); -} - -static inline pte_t huge_ptep_get(pte_t *ptep) -{ - return *ptep; -} - -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - -#endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h deleted file mode 100644 index fbe2932fa9e9..000000000000 --- a/include/asm-powerpc/hvcall.h +++ /dev/null @@ -1,296 +0,0 @@ -#ifndef _ASM_POWERPC_HVCALL_H -#define _ASM_POWERPC_HVCALL_H -#ifdef __KERNEL__ - -#define HVSC .long 0x44000022 - -#define H_SUCCESS 0 -#define H_BUSY 1 /* Hardware busy -- retry later */ -#define H_CLOSED 2 /* Resource closed */ -#define H_NOT_AVAILABLE 3 -#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ -#define H_PARTIAL 5 -#define H_IN_PROGRESS 14 /* Kind of like busy */ -#define H_PAGE_REGISTERED 15 -#define H_PARTIAL_STORE 16 -#define H_PENDING 17 /* returned from H_POLL_PENDING */ -#define H_CONTINUE 18 /* Returned from H_Join on success */ -#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ -#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ - is a good time to retry */ -#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ - is a good time to retry */ -#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ -#define H_HARDWARE -1 /* Hardware error */ -#define H_FUNCTION -2 /* Function not supported */ -#define H_PRIVILEGE -3 /* Caller not privileged */ -#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ -#define H_BAD_MODE -5 /* Illegal msr value */ -#define H_PTEG_FULL -6 /* PTEG is full */ -#define H_NOT_FOUND -7 /* PTE was not found" */ -#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ -#define H_NO_MEM -9 -#define H_AUTHORITY -10 -#define H_PERMISSION -11 -#define H_DROPPED -12 -#define H_SOURCE_PARM -13 -#define H_DEST_PARM -14 -#define H_REMOTE_PARM -15 -#define H_RESOURCE -16 -#define H_ADAPTER_PARM -17 -#define H_RH_PARM -18 -#define H_RCQ_PARM -19 -#define H_SCQ_PARM -20 -#define H_EQ_PARM -21 -#define H_RT_PARM -22 -#define H_ST_PARM -23 -#define H_SIGT_PARM -24 -#define H_TOKEN_PARM -25 -#define H_MLENGTH_PARM -27 -#define H_MEM_PARM -28 -#define H_MEM_ACCESS_PARM -29 -#define H_ATTR_PARM -30 -#define H_PORT_PARM -31 -#define H_MCG_PARM -32 -#define H_VL_PARM -33 -#define H_TSIZE_PARM -34 -#define H_TRACE_PARM -35 - -#define H_MASK_PARM -37 -#define H_MCG_FULL -38 -#define H_ALIAS_EXIST -39 -#define H_P_COUNTER -40 -#define H_TABLE_FULL -41 -#define H_ALT_TABLE -42 -#define H_MR_CONDITION -43 -#define H_NOT_ENOUGH_RESOURCES -44 -#define H_R_STATE -45 -#define H_RESCINDEND -46 - - -/* Long Busy is a condition that can be returned by the firmware - * when a call cannot be completed now, but the identical call - * should be retried later. This prevents calls blocking in the - * firmware for long periods of time. Annoyingly the firmware can return - * a range of return codes, hinting at how long we should wait before - * retrying. If you don't care for the hint, the macro below is a good - * way to check for the long_busy return codes - */ -#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ - && (x <= H_LONG_BUSY_END_RANGE)) - -/* Flags */ -#define H_LARGE_PAGE (1UL<<(63-16)) -#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ -#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ -#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ -#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) -#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) -#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) -#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) -#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE -#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ -#define H_ANDCOND (1UL<<(63-33)) -#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ -#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ -#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ -#define H_COPY_PAGE (1UL<<(63-49)) -#define H_N (1UL<<(63-61)) -#define H_PP1 (1UL<<(63-62)) -#define H_PP2 (1UL<<(63-63)) - -/* VASI States */ -#define H_VASI_INVALID 0 -#define H_VASI_ENABLED 1 -#define H_VASI_ABORTED 2 -#define H_VASI_SUSPENDING 3 -#define H_VASI_SUSPENDED 4 -#define H_VASI_RESUMED 5 -#define H_VASI_COMPLETED 6 - -/* DABRX flags */ -#define H_DABRX_HYPERVISOR (1UL<<(63-61)) -#define H_DABRX_KERNEL (1UL<<(63-62)) -#define H_DABRX_USER (1UL<<(63-63)) - -/* Each control block has to be on a 4K bondary */ -#define H_CB_ALIGNMENT 4096 - -/* pSeries hypervisor opcodes */ -#define H_REMOVE 0x04 -#define H_ENTER 0x08 -#define H_READ 0x0c -#define H_CLEAR_MOD 0x10 -#define H_CLEAR_REF 0x14 -#define H_PROTECT 0x18 -#define H_GET_TCE 0x1c -#define H_PUT_TCE 0x20 -#define H_SET_SPRG0 0x24 -#define H_SET_DABR 0x28 -#define H_PAGE_INIT 0x2c -#define H_SET_ASR 0x30 -#define H_ASR_ON 0x34 -#define H_ASR_OFF 0x38 -#define H_LOGICAL_CI_LOAD 0x3c -#define H_LOGICAL_CI_STORE 0x40 -#define H_LOGICAL_CACHE_LOAD 0x44 -#define H_LOGICAL_CACHE_STORE 0x48 -#define H_LOGICAL_ICBI 0x4c -#define H_LOGICAL_DCBF 0x50 -#define H_GET_TERM_CHAR 0x54 -#define H_PUT_TERM_CHAR 0x58 -#define H_REAL_TO_LOGICAL 0x5c -#define H_HYPERVISOR_DATA 0x60 -#define H_EOI 0x64 -#define H_CPPR 0x68 -#define H_IPI 0x6c -#define H_IPOLL 0x70 -#define H_XIRR 0x74 -#define H_PERFMON 0x7c -#define H_MIGRATE_DMA 0x78 -#define H_REGISTER_VPA 0xDC -#define H_CEDE 0xE0 -#define H_CONFER 0xE4 -#define H_PROD 0xE8 -#define H_GET_PPP 0xEC -#define H_SET_PPP 0xF0 -#define H_PURR 0xF4 -#define H_PIC 0xF8 -#define H_REG_CRQ 0xFC -#define H_FREE_CRQ 0x100 -#define H_VIO_SIGNAL 0x104 -#define H_SEND_CRQ 0x108 -#define H_COPY_RDMA 0x110 -#define H_REGISTER_LOGICAL_LAN 0x114 -#define H_FREE_LOGICAL_LAN 0x118 -#define H_ADD_LOGICAL_LAN_BUFFER 0x11C -#define H_SEND_LOGICAL_LAN 0x120 -#define H_BULK_REMOVE 0x124 -#define H_MULTICAST_CTRL 0x130 -#define H_SET_XDABR 0x134 -#define H_STUFF_TCE 0x138 -#define H_PUT_TCE_INDIRECT 0x13C -#define H_CHANGE_LOGICAL_LAN_MAC 0x14C -#define H_VTERM_PARTNER_INFO 0x150 -#define H_REGISTER_VTERM 0x154 -#define H_FREE_VTERM 0x158 -#define H_RESET_EVENTS 0x15C -#define H_ALLOC_RESOURCE 0x160 -#define H_FREE_RESOURCE 0x164 -#define H_MODIFY_QP 0x168 -#define H_QUERY_QP 0x16C -#define H_REREGISTER_PMR 0x170 -#define H_REGISTER_SMR 0x174 -#define H_QUERY_MR 0x178 -#define H_QUERY_MW 0x17C -#define H_QUERY_HCA 0x180 -#define H_QUERY_PORT 0x184 -#define H_MODIFY_PORT 0x188 -#define H_DEFINE_AQP1 0x18C -#define H_GET_TRACE_BUFFER 0x190 -#define H_DEFINE_AQP0 0x194 -#define H_RESIZE_MR 0x198 -#define H_ATTACH_MCQP 0x19C -#define H_DETACH_MCQP 0x1A0 -#define H_CREATE_RPT 0x1A4 -#define H_REMOVE_RPT 0x1A8 -#define H_REGISTER_RPAGES 0x1AC -#define H_DISABLE_AND_GETC 0x1B0 -#define H_ERROR_DATA 0x1B4 -#define H_GET_HCA_INFO 0x1B8 -#define H_GET_PERF_COUNT 0x1BC -#define H_MANAGE_TRACE 0x1C0 -#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 -#define H_QUERY_INT_STATE 0x1E4 -#define H_POLL_PENDING 0x1D8 -#define H_ILLAN_ATTRIBUTES 0x244 -#define H_JOIN 0x298 -#define H_VASI_STATE 0x2A4 -#define H_ENABLE_CRQ 0x2B0 -#define H_SET_MPP 0x2D0 -#define H_GET_MPP 0x2D4 -#define MAX_HCALL_OPCODE H_GET_MPP - -#ifndef __ASSEMBLY__ - -/** - * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments - * @opcode: The hypervisor call to make. - * - * This call supports up to 7 arguments and only returns the status of - * the hcall. Use this version where possible, its slightly faster than - * the other plpar_hcalls. - */ -long plpar_hcall_norets(unsigned long opcode, ...); - -/** - * plpar_hcall: - Make a pseries hypervisor call - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 4 return arguments in. - * - * This call supports up to 6 arguments and 4 return arguments. Use - * PLPAR_HCALL_BUFSIZE to size the return argument buffer. - * - * Used for all but the craziest of phyp interfaces (see plpar_hcall9) - */ -#define PLPAR_HCALL_BUFSIZE 4 -long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); - -/** - * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 4 return arguments in. - * - * This call supports up to 6 arguments and 4 return arguments. Use - * PLPAR_HCALL_BUFSIZE to size the return argument buffer. - * - * Used when phyp interface needs to be called in real mode. Similar to - * plpar_hcall, but plpar_hcall_raw works in real mode and does not - * calculate hypervisor call statistics. - */ -long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); - -/** - * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments - * @opcode: The hypervisor call to make. - * @retbuf: Buffer to store up to 9 return arguments in. - * - * This call supports up to 9 arguments and 9 return arguments. Use - * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. - */ -#define PLPAR_HCALL9_BUFSIZE 9 -long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); - -/* For hcall instrumentation. One structure per-hcall, per-CPU */ -struct hcall_stats { - unsigned long num_calls; /* number of calls (on this CPU) */ - unsigned long tb_total; /* total wall time (mftb) of calls. */ - unsigned long purr_total; /* total cpu time (PURR) of calls. */ -}; -#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) - -struct hvcall_mpp_data { - unsigned long entitled_mem; - unsigned long mapped_mem; - unsigned short group_num; - unsigned short pool_num; - unsigned char mem_weight; - unsigned char unallocated_mem_weight; - unsigned long unallocated_entitlement; /* value in bytes */ - unsigned long pool_size; - signed long loan_request; - unsigned long backing_mem; -}; - -int h_get_mpp(struct hvcall_mpp_data *); -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/include/asm-powerpc/hvconsole.h b/include/asm-powerpc/hvconsole.h deleted file mode 100644 index 35ea69e8121f..000000000000 --- a/include/asm-powerpc/hvconsole.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * hvconsole.h - * Copyright (C) 2004 Ryan S Arnold, IBM Corporation - * - * LPAR console support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_HVCONSOLE_H -#define _PPC64_HVCONSOLE_H -#ifdef __KERNEL__ - -/* - * PSeries firmware will only send/recv up to 16 bytes of character data per - * hcall. - */ -#define MAX_VIO_PUT_CHARS 16 -#define SIZE_VIO_GET_CHARS 16 - -/* - * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count' - * parm is included to conform to put_chars() function pointer template - */ -extern int hvc_get_chars(uint32_t vtermno, char *buf, int count); -extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count); - -#endif /* __KERNEL__ */ -#endif /* _PPC64_HVCONSOLE_H */ diff --git a/include/asm-powerpc/hvcserver.h b/include/asm-powerpc/hvcserver.h deleted file mode 100644 index 67d7da3a4da4..000000000000 --- a/include/asm-powerpc/hvcserver.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * hvcserver.h - * Copyright (C) 2004 Ryan S Arnold, IBM Corporation - * - * PPC64 virtual I/O console server support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PPC64_HVCSERVER_H -#define _PPC64_HVCSERVER_H -#ifdef __KERNEL__ - -#include - -/* Converged Location Code length */ -#define HVCS_CLC_LENGTH 79 - -/** - * hvcs_partner_info - an element in a list of partner info - * @node: list_head denoting this partner_info struct's position in the list of - * partner info. - * @unit_address: The partner unit address of this entry. - * @partition_ID: The partner partition ID of this entry. - * @location_code: The converged location code of this entry + 1 char for the - * null-term. - * - * This structure outlines the format that partner info is presented to a caller - * of the hvcs partner info fetching functions. These are strung together into - * a list using linux kernel lists. - */ -struct hvcs_partner_info { - struct list_head node; - uint32_t unit_address; - uint32_t partition_ID; - char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */ -}; - -extern int hvcs_free_partner_info(struct list_head *head); -extern int hvcs_get_partner_info(uint32_t unit_address, - struct list_head *head, unsigned long *pi_buff); -extern int hvcs_register_connection(uint32_t unit_address, - uint32_t p_partition_ID, uint32_t p_unit_address); -extern int hvcs_free_connection(uint32_t unit_address); - -#endif /* __KERNEL__ */ -#endif /* _PPC64_HVCSERVER_H */ diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h deleted file mode 100644 index f75a5fc64d2e..000000000000 --- a/include/asm-powerpc/hw_irq.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan - */ -#ifndef _ASM_POWERPC_HW_IRQ_H -#define _ASM_POWERPC_HW_IRQ_H - -#ifdef __KERNEL__ - -#include -#include -#include -#include - -extern void timer_interrupt(struct pt_regs *); - -#ifdef CONFIG_PPC64 -#include - -static inline unsigned long local_get_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__("lbz %0,%1(13)" - : "=r" (flags) - : "i" (offsetof(struct paca_struct, soft_enabled))); - - return flags; -} - -static inline unsigned long raw_local_irq_disable(void) -{ - unsigned long flags, zero; - - __asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)" - : "=r" (flags), "=&r" (zero) - : "i" (offsetof(struct paca_struct, soft_enabled)) - : "memory"); - - return flags; -} - -extern void raw_local_irq_restore(unsigned long); -extern void iseries_handle_interrupts(void); - -#define raw_local_irq_enable() raw_local_irq_restore(1) -#define raw_local_save_flags(flags) ((flags) = local_get_flags()) -#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable()) - -#define raw_irqs_disabled() (local_get_flags() == 0) -#define raw_irqs_disabled_flags(flags) ((flags) == 0) - -#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) -#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) - -#define hard_irq_disable() \ - do { \ - __hard_irq_disable(); \ - get_paca()->soft_enabled = 0; \ - get_paca()->hard_enabled = 0; \ - } while(0) - -static inline int irqs_disabled_flags(unsigned long flags) -{ - return flags == 0; -} - -#else - -#if defined(CONFIG_BOOKE) -#define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) __asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory") -#else -#define SET_MSR_EE(x) mtmsr(x) -#define local_irq_restore(flags) mtmsr(flags) -#endif - -static inline void local_irq_disable(void) -{ -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); -#else - unsigned long msr; - __asm__ __volatile__("": : :"memory"); - msr = mfmsr(); - SET_MSR_EE(msr & ~MSR_EE); -#endif -} - -static inline void local_irq_enable(void) -{ -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 1": : :"memory"); -#else - unsigned long msr; - __asm__ __volatile__("": : :"memory"); - msr = mfmsr(); - SET_MSR_EE(msr | MSR_EE); -#endif -} - -static inline void local_irq_save_ptr(unsigned long *flags) -{ - unsigned long msr; - msr = mfmsr(); - *flags = msr; -#ifdef CONFIG_BOOKE - __asm__ __volatile__("wrteei 0": : :"memory"); -#else - SET_MSR_EE(msr & ~MSR_EE); -#endif - __asm__ __volatile__("": : :"memory"); -} - -#define local_save_flags(flags) ((flags) = mfmsr()) -#define local_irq_save(flags) local_irq_save_ptr(&flags) -#define irqs_disabled() ((mfmsr() & MSR_EE) == 0) - -#define hard_irq_enable() local_irq_enable() -#define hard_irq_disable() local_irq_disable() - -static inline int irqs_disabled_flags(unsigned long flags) -{ - return (flags & MSR_EE) == 0; -} - -#endif /* CONFIG_PPC64 */ - -/* - * interrupt-retrigger: should we handle this via lost interrupts and IPIs - * or should we not care like we do now ? --BenH. - */ -struct hw_interrupt_type; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/include/asm-powerpc/hydra.h b/include/asm-powerpc/hydra.h deleted file mode 100644 index 1ad4eed07fbe..000000000000 --- a/include/asm-powerpc/hydra.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions - * - * Copyright (C) 1997 Geert Uytterhoeven - * - * This file is based on the following documentation: - * - * Macintosh Technology in the Common Hardware Reference Platform - * Apple Computer, Inc. - * - * © Copyright 1995 Apple Computer, Inc. All rights reserved. - * - * It's available online from http://chrp.apple.com/MacTech.pdf. - * You can obtain paper copies of this book from computer bookstores or by - * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San - * Francisco, CA 94104. Reference ISBN 1-55860-393-X. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _ASMPPC_HYDRA_H -#define _ASMPPC_HYDRA_H - -#ifdef __KERNEL__ - -struct Hydra { - /* DBDMA Controller Register Space */ - char Pad1[0x30]; - u_int CachePD; - u_int IDs; - u_int Feature_Control; - char Pad2[0x7fc4]; - /* DBDMA Channel Register Space */ - char SCSI_DMA[0x100]; - char Pad3[0x300]; - char SCCA_Tx_DMA[0x100]; - char SCCA_Rx_DMA[0x100]; - char SCCB_Tx_DMA[0x100]; - char SCCB_Rx_DMA[0x100]; - char Pad4[0x7800]; - /* Device Register Space */ - char SCSI[0x1000]; - char ADB[0x1000]; - char SCC_Legacy[0x1000]; - char SCC[0x1000]; - char Pad9[0x2000]; - char VIA[0x2000]; - char Pad10[0x28000]; - char OpenPIC[0x40000]; -}; - -extern volatile struct Hydra __iomem *Hydra; - - - /* - * Feature Control Register - */ - -#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ -#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ -#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ -#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ -#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ -#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ -#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ -#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ -#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ - - - /* - * OpenPIC Interrupt Sources - */ - -#define HYDRA_INT_SIO 0 -#define HYDRA_INT_SCSI_DMA 1 -#define HYDRA_INT_SCCA_TX_DMA 2 -#define HYDRA_INT_SCCA_RX_DMA 3 -#define HYDRA_INT_SCCB_TX_DMA 4 -#define HYDRA_INT_SCCB_RX_DMA 5 -#define HYDRA_INT_SCSI 6 -#define HYDRA_INT_SCCA 7 -#define HYDRA_INT_SCCB 8 -#define HYDRA_INT_VIA 9 -#define HYDRA_INT_ADB 10 -#define HYDRA_INT_ADB_NMI 11 -#define HYDRA_INT_EXT1 12 /* PCI IRQW */ -#define HYDRA_INT_EXT2 13 /* PCI IRQX */ -#define HYDRA_INT_EXT3 14 /* PCI IRQY */ -#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ -#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ -#define HYDRA_INT_EXT6 17 /* IDE Secondary */ -#define HYDRA_INT_EXT7 18 /* Power Off Request */ -#define HYDRA_INT_SPARE 19 - -extern int hydra_init(void); -extern void macio_adb_init(void); - -#endif /* __KERNEL__ */ - -#endif /* _ASMPPC_HYDRA_H */ diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h deleted file mode 100644 index db1362f8c603..000000000000 --- a/include/asm-powerpc/i8259.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _ASM_POWERPC_I8259_H -#define _ASM_POWERPC_I8259_H -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_PPC_MERGE -extern void i8259_init(struct device_node *node, unsigned long intack_addr); -extern unsigned int i8259_irq(void); -extern struct irq_host *i8259_get_host(void); -#else -extern void i8259_init(unsigned long intack_addr, int offset); -extern int i8259_irq(void); -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_I8259_H */ diff --git a/include/asm-powerpc/ibmebus.h b/include/asm-powerpc/ibmebus.h deleted file mode 100644 index 1a9d9aea21fa..000000000000 --- a/include/asm-powerpc/ibmebus.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * IBM PowerPC eBus Infrastructure Support. - * - * Copyright (c) 2005 IBM Corporation - * Joachim Fenkes - * Heiko J Schick - * - * All rights reserved. - * - * This source code is distributed under a dual license of GPL v2.0 and OpenIB - * BSD. - * - * OpenIB BSD License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _ASM_EBUS_H -#define _ASM_EBUS_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -extern struct bus_type ibmebus_bus_type; - -int ibmebus_register_driver(struct of_platform_driver *drv); -void ibmebus_unregister_driver(struct of_platform_driver *drv); - -int ibmebus_request_irq(u32 ist, irq_handler_t handler, - unsigned long irq_flags, const char *devname, - void *dev_id); -void ibmebus_free_irq(u32 ist, void *dev_id); - -#endif /* __KERNEL__ */ -#endif /* _ASM_IBMEBUS_H */ diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h deleted file mode 100644 index 1aaf27be8741..000000000000 --- a/include/asm-powerpc/ide.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 1994-1996 Linus Torvalds & authors - * - * This file contains the powerpc architecture specific IDE code. - */ -#ifndef _ASM_POWERPC_IDE_H -#define _ASM_POWERPC_IDE_H - -#ifdef __KERNEL__ - -#ifndef __powerpc64__ -#include -#include -#endif -#include - -#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) -#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) -#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) -#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) - -#ifndef __powerpc64__ -#include -#include - -/* FIXME: use ide_platform host driver */ -static __inline__ int ide_default_irq(unsigned long base) -{ -#ifdef CONFIG_PPLUS - switch (base) { - case 0x1f0: return 14; - case 0x170: return 15; - } -#endif - return 0; -} - -/* FIXME: use ide_platform host driver */ -static __inline__ unsigned long ide_default_io_base(int index) -{ -#ifdef CONFIG_PPLUS - switch (index) { - case 0: return 0x1f0; - case 1: return 0x170; - } -#endif - return 0; -} - -#ifdef CONFIG_BLK_DEV_MPC8xx_IDE -#define IDE_ARCH_ACK_INTR 1 -#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) -#endif - -#endif /* __powerpc64__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_IDE_H */ diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h deleted file mode 100644 index 0f165e59c326..000000000000 --- a/include/asm-powerpc/immap_86xx.h +++ /dev/null @@ -1,156 +0,0 @@ -/** - * MPC86xx Internal Memory Map - * - * Authors: Jeff Brown - * Timur Tabi - * - * Copyright 2004,2007 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This header file defines structures for various 86xx SOC devices that are - * used by multiple source files. - */ - -#ifndef __ASM_POWERPC_IMMAP_86XX_H__ -#define __ASM_POWERPC_IMMAP_86XX_H__ -#ifdef __KERNEL__ - -/* Global Utility Registers */ -struct ccsr_guts { - __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ - __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ - __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ - __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ - __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - u8 res1[0x20 - 0x14]; - __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ - u8 res2[0x30 - 0x24]; - __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ - u8 res3[0x40 - 0x34]; - __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ - u8 res4[0x50 - 0x44]; - __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ - u8 res5[0x60 - 0x54]; - __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - u8 res6[0x70 - 0x64]; - __be32 devdisr; /* 0x.0070 - Device Disable Control */ - __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ - u8 res7[0x80 - 0x78]; - __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - u8 res8[0x90 - 0x84]; - __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ - __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ - u8 res9[0xA0 - 0x98]; - __be32 pvr; /* 0x.00a0 - Processor Version Register */ - __be32 svr; /* 0x.00a4 - System Version Register */ - u8 res10[0xB0 - 0xA8]; - __be32 rstcr; /* 0x.00b0 - Reset Control Register */ - u8 res11[0xC0 - 0xB4]; - __be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */ - u8 res12[0x800 - 0xC4]; - __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ - u8 res13[0x900 - 0x804]; - __be32 ircr; /* 0x.0900 - Infrared Control Register */ - u8 res14[0x908 - 0x904]; - __be32 dmacr; /* 0x.0908 - DMA Control Register */ - u8 res15[0x914 - 0x90C]; - __be32 elbccr; /* 0x.0914 - eLBC Control Register */ - u8 res16[0xB20 - 0x918]; - __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ - __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ - __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ - u8 res17[0xE00 - 0xB2C]; - __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ - u8 res18[0xE10 - 0xE04]; - __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ - u8 res19[0xE20 - 0xE14]; - __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - u8 res20[0xF04 - 0xE24]; - __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ - __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ - u8 res21[0xF40 - 0xF0C]; - __be32 srds2cr0; /* 0x.0f40 - SerDes1 Control Register 0 */ - __be32 srds2cr1; /* 0x.0f44 - SerDes1 Control Register 0 */ -} __attribute__ ((packed)); - -#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ -#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */ - -/* - * Set the DMACR register in the GUTS - * - * The DMACR register determines the source of initiated transfers for each - * channel on each DMA controller. Rather than have a bunch of repetitive - * macros for the bit patterns, we just have a function that calculates - * them. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx) - */ -static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int device) -{ - unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); - - clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); -} - -#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000 -#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */ -#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */ -#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */ -#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */ -#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */ -#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */ -#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */ -#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */ -#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008 -#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004 -#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002 -#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001 - -/* - * Set the DMA external control bits in the GUTS - * - * The DMA external control bits in the PMUXCR are only meaningful for - * channels 0 and 3. Any other channels are ignored. - * - * guts: Pointer to GUTS structure - * co: The DMA controller (0 or 1) - * ch: The channel on the DMA controller (0, 1, 2, or 3) - * value: the new value for the bit (0 or 1) - */ -static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts, - unsigned int co, unsigned int ch, unsigned int value) -{ - if ((ch == 0) || (ch == 3)) { - unsigned int shift = 2 * (co + 1) - (ch & 1) - 1; - - clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift); - } -} - -#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000 -#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000 -#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25 -#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000 -#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \ - (((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT) -#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16 -#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000 -#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT) -#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF -#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK) - -#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_cpm2.h b/include/asm-powerpc/immap_cpm2.h deleted file mode 100644 index 4080bab0468c..000000000000 --- a/include/asm-powerpc/immap_cpm2.h +++ /dev/null @@ -1,650 +0,0 @@ -/* - * CPM2 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - * The Internal Memory Map for devices with CPM2 on them. This - * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, - * 8560). - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_CPM2__ -#define __IMMAP_CPM2__ - -#include - -/* System configuration registers. -*/ -typedef struct sys_82xx_conf { - u32 sc_siumcr; - u32 sc_sypcr; - u8 res1[6]; - u16 sc_swsr; - u8 res2[20]; - u32 sc_bcr; - u8 sc_ppc_acr; - u8 res3[3]; - u32 sc_ppc_alrh; - u32 sc_ppc_alrl; - u8 sc_lcl_acr; - u8 res4[3]; - u32 sc_lcl_alrh; - u32 sc_lcl_alrl; - u32 sc_tescr1; - u32 sc_tescr2; - u32 sc_ltescr1; - u32 sc_ltescr2; - u32 sc_pdtea; - u8 sc_pdtem; - u8 res5[3]; - u32 sc_ldtea; - u8 sc_ldtem; - u8 res6[163]; -} sysconf_82xx_cpm2_t; - -typedef struct sys_85xx_conf { - u32 sc_cear; - u16 sc_ceer; - u16 sc_cemr; - u8 res1[70]; - u32 sc_smaer; - u8 res2[4]; - u32 sc_smevr; - u32 sc_smctr; - u32 sc_lmaer; - u8 res3[4]; - u32 sc_lmevr; - u32 sc_lmctr; - u8 res4[144]; -} sysconf_85xx_cpm2_t; - -typedef union sys_conf { - sysconf_82xx_cpm2_t siu_82xx; - sysconf_85xx_cpm2_t siu_85xx; -} sysconf_cpm2_t; - - - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - u32 memc_br0; - u32 memc_or0; - u32 memc_br1; - u32 memc_or1; - u32 memc_br2; - u32 memc_or2; - u32 memc_br3; - u32 memc_or3; - u32 memc_br4; - u32 memc_or4; - u32 memc_br5; - u32 memc_or5; - u32 memc_br6; - u32 memc_or6; - u32 memc_br7; - u32 memc_or7; - u32 memc_br8; - u32 memc_or8; - u32 memc_br9; - u32 memc_or9; - u32 memc_br10; - u32 memc_or10; - u32 memc_br11; - u32 memc_or11; - u8 res1[8]; - u32 memc_mar; - u8 res2[4]; - u32 memc_mamr; - u32 memc_mbmr; - u32 memc_mcmr; - u8 res3[8]; - u16 memc_mptpr; - u8 res4[2]; - u32 memc_mdr; - u8 res5[4]; - u32 memc_psdmr; - u32 memc_lsdmr; - u8 memc_purt; - u8 res6[3]; - u8 memc_psrt; - u8 res7[3]; - u8 memc_lurt; - u8 res8[3]; - u8 memc_lsrt; - u8 res9[3]; - u32 memc_immr; - u32 memc_pcibr0; - u32 memc_pcibr1; - u8 res10[16]; - u32 memc_pcimsk0; - u32 memc_pcimsk1; - u8 res11[52]; -} memctl_cpm2_t; - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - u8 res1[32]; - u16 sit_tmcntsc; - u8 res2[2]; - u32 sit_tmcnt; - u8 res3[4]; - u32 sit_tmcntal; - u8 res4[16]; - u16 sit_piscr; - u8 res5[2]; - u32 sit_pitc; - u32 sit_pitr; - u8 res6[94]; - u8 res7[390]; -} sit_cpm2_t; - -#define PISCR_PIRQ_MASK ((u16)0xff00) -#define PISCR_PS ((u16)0x0080) -#define PISCR_PIE ((u16)0x0004) -#define PISCR_PTF ((u16)0x0002) -#define PISCR_PTE ((u16)0x0001) - -/* PCI Controller. -*/ -typedef struct pci_ctlr { - u32 pci_omisr; - u32 pci_omimr; - u8 res1[8]; - u32 pci_ifqpr; - u32 pci_ofqpr; - u8 res2[8]; - u32 pci_imr0; - u32 pci_imr1; - u32 pci_omr0; - u32 pci_omr1; - u32 pci_odr; - u8 res3[4]; - u32 pci_idr; - u8 res4[20]; - u32 pci_imisr; - u32 pci_imimr; - u8 res5[24]; - u32 pci_ifhpr; - u8 res6[4]; - u32 pci_iftpr; - u8 res7[4]; - u32 pci_iphpr; - u8 res8[4]; - u32 pci_iptpr; - u8 res9[4]; - u32 pci_ofhpr; - u8 res10[4]; - u32 pci_oftpr; - u8 res11[4]; - u32 pci_ophpr; - u8 res12[4]; - u32 pci_optpr; - u8 res13[8]; - u32 pci_mucr; - u8 res14[8]; - u32 pci_qbar; - u8 res15[12]; - u32 pci_dmamr0; - u32 pci_dmasr0; - u32 pci_dmacdar0; - u8 res16[4]; - u32 pci_dmasar0; - u8 res17[4]; - u32 pci_dmadar0; - u8 res18[4]; - u32 pci_dmabcr0; - u32 pci_dmandar0; - u8 res19[86]; - u32 pci_dmamr1; - u32 pci_dmasr1; - u32 pci_dmacdar1; - u8 res20[4]; - u32 pci_dmasar1; - u8 res21[4]; - u32 pci_dmadar1; - u8 res22[4]; - u32 pci_dmabcr1; - u32 pci_dmandar1; - u8 res23[88]; - u32 pci_dmamr2; - u32 pci_dmasr2; - u32 pci_dmacdar2; - u8 res24[4]; - u32 pci_dmasar2; - u8 res25[4]; - u32 pci_dmadar2; - u8 res26[4]; - u32 pci_dmabcr2; - u32 pci_dmandar2; - u8 res27[88]; - u32 pci_dmamr3; - u32 pci_dmasr3; - u32 pci_dmacdar3; - u8 res28[4]; - u32 pci_dmasar3; - u8 res29[4]; - u32 pci_dmadar3; - u8 res30[4]; - u32 pci_dmabcr3; - u32 pci_dmandar3; - u8 res31[344]; - u32 pci_potar0; - u8 res32[4]; - u32 pci_pobar0; - u8 res33[4]; - u32 pci_pocmr0; - u8 res34[4]; - u32 pci_potar1; - u8 res35[4]; - u32 pci_pobar1; - u8 res36[4]; - u32 pci_pocmr1; - u8 res37[4]; - u32 pci_potar2; - u8 res38[4]; - u32 pci_pobar2; - u8 res39[4]; - u32 pci_pocmr2; - u8 res40[50]; - u32 pci_ptcr; - u32 pci_gpcr; - u32 pci_gcr; - u32 pci_esr; - u32 pci_emr; - u32 pci_ecr; - u32 pci_eacr; - u8 res41[4]; - u32 pci_edcr; - u8 res42[4]; - u32 pci_eccr; - u8 res43[44]; - u32 pci_pitar1; - u8 res44[4]; - u32 pci_pibar1; - u8 res45[4]; - u32 pci_picmr1; - u8 res46[4]; - u32 pci_pitar0; - u8 res47[4]; - u32 pci_pibar0; - u8 res48[4]; - u32 pci_picmr0; - u8 res49[4]; - u32 pci_cfg_addr; - u32 pci_cfg_data; - u32 pci_int_ack; - u8 res50[756]; -} pci_cpm2_t; - -/* Interrupt Controller. -*/ -typedef struct interrupt_controller { - u16 ic_sicr; - u8 res1[2]; - u32 ic_sivec; - u32 ic_sipnrh; - u32 ic_sipnrl; - u32 ic_siprr; - u32 ic_scprrh; - u32 ic_scprrl; - u32 ic_simrh; - u32 ic_simrl; - u32 ic_siexr; - u8 res2[88]; -} intctl_cpm2_t; - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - u32 car_sccr; - u8 res1[4]; - u32 car_scmr; - u8 res2[4]; - u32 car_rsr; - u32 car_rmr; - u8 res[104]; -} car_cpm2_t; - -/* Input/Output Port control/status registers. - * Names consistent with processor manual, although they are different - * from the original 8xx names....... - */ -typedef struct io_port { - u32 iop_pdira; - u32 iop_ppara; - u32 iop_psora; - u32 iop_podra; - u32 iop_pdata; - u8 res1[12]; - u32 iop_pdirb; - u32 iop_pparb; - u32 iop_psorb; - u32 iop_podrb; - u32 iop_pdatb; - u8 res2[12]; - u32 iop_pdirc; - u32 iop_pparc; - u32 iop_psorc; - u32 iop_podrc; - u32 iop_pdatc; - u8 res3[12]; - u32 iop_pdird; - u32 iop_ppard; - u32 iop_psord; - u32 iop_podrd; - u32 iop_pdatd; - u8 res4[12]; -} iop_cpm2_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - u8 cpmt_tgcr1; - u8 res1[3]; - u8 cpmt_tgcr2; - u8 res2[11]; - u16 cpmt_tmr1; - u16 cpmt_tmr2; - u16 cpmt_trr1; - u16 cpmt_trr2; - u16 cpmt_tcr1; - u16 cpmt_tcr2; - u16 cpmt_tcn1; - u16 cpmt_tcn2; - u16 cpmt_tmr3; - u16 cpmt_tmr4; - u16 cpmt_trr3; - u16 cpmt_trr4; - u16 cpmt_tcr3; - u16 cpmt_tcr4; - u16 cpmt_tcn3; - u16 cpmt_tcn4; - u16 cpmt_ter1; - u16 cpmt_ter2; - u16 cpmt_ter3; - u16 cpmt_ter4; - u8 res3[584]; -} cpmtimer_cpm2_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - u8 res0[24]; - u8 sdma_sdsr; - u8 res1[3]; - u8 sdma_sdmr; - u8 res2[3]; - u8 sdma_idsr1; - u8 res3[3]; - u8 sdma_idmr1; - u8 res4[3]; - u8 sdma_idsr2; - u8 res5[3]; - u8 sdma_idmr2; - u8 res6[3]; - u8 sdma_idsr3; - u8 res7[3]; - u8 sdma_idmr3; - u8 res8[3]; - u8 sdma_idsr4; - u8 res9[3]; - u8 sdma_idmr4; - u8 res10[707]; -} sdma_cpm2_t; - -/* Fast controllers -*/ -typedef struct fcc { - u32 fcc_gfmr; - u32 fcc_fpsmr; - u16 fcc_ftodr; - u8 res1[2]; - u16 fcc_fdsr; - u8 res2[2]; - u16 fcc_fcce; - u8 res3[2]; - u16 fcc_fccm; - u8 res4[2]; - u8 fcc_fccs; - u8 res5[3]; - u8 fcc_ftirr_phy[4]; -} fcc_t; - -/* Fast controllers continued - */ -typedef struct fcc_c { - u32 fcc_firper; - u32 fcc_firer; - u32 fcc_firsr_hi; - u32 fcc_firsr_lo; - u8 fcc_gfemr; - u8 res1[15]; -} fcc_c_t; - -/* TC Layer - */ -typedef struct tclayer { - u16 tc_tcmode; - u16 tc_cdsmr; - u16 tc_tcer; - u16 tc_rcc; - u16 tc_tcmr; - u16 tc_fcc; - u16 tc_ccc; - u16 tc_icc; - u16 tc_tcc; - u16 tc_ecc; - u8 res1[12]; -} tclayer_t; - - -/* I2C -*/ -typedef struct i2c { - u8 i2c_i2mod; - u8 res1[3]; - u8 i2c_i2add; - u8 res2[3]; - u8 i2c_i2brg; - u8 res3[3]; - u8 i2c_i2com; - u8 res4[3]; - u8 i2c_i2cer; - u8 res5[3]; - u8 i2c_i2cmr; - u8 res6[331]; -} i2c_cpm2_t; - -typedef struct scc { /* Serial communication channels */ - u32 scc_gsmrl; - u32 scc_gsmrh; - u16 scc_psmr; - u8 res1[2]; - u16 scc_todr; - u16 scc_dsr; - u16 scc_scce; - u8 res2[2]; - u16 scc_sccm; - u8 res3; - u8 scc_sccs; - u8 res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - u8 res1[2]; - u16 smc_smcmr; - u8 res2[2]; - u8 smc_smce; - u8 res3[3]; - u8 smc_smcm; - u8 res4[5]; -} smc_t; - -/* Serial Peripheral Interface. -*/ -typedef struct spi_ctrl { - u16 spi_spmode; - u8 res1[4]; - u8 spi_spie; - u8 res2[3]; - u8 spi_spim; - u8 res3[2]; - u8 spi_spcom; - u8 res4[82]; -} spictl_cpm2_t; - -/* CPM Mux. -*/ -typedef struct cpmux { - u8 cmx_si1cr; - u8 res1; - u8 cmx_si2cr; - u8 res2; - u32 cmx_fcr; - u32 cmx_scr; - u8 cmx_smr; - u8 res3; - u16 cmx_uar; - u8 res4[16]; -} cpmux_t; - -/* SIRAM control -*/ -typedef struct siram { - u16 si_amr; - u16 si_bmr; - u16 si_cmr; - u16 si_dmr; - u8 si_gmr; - u8 res1; - u8 si_cmdr; - u8 res2; - u8 si_str; - u8 res3; - u16 si_rsr; -} siramctl_t; - -typedef struct mcc { - u16 mcc_mcce; - u8 res1[2]; - u16 mcc_mccm; - u8 res2[2]; - u8 mcc_mccf; - u8 res3[7]; -} mcc_t; - -typedef struct comm_proc { - u32 cp_cpcr; - u32 cp_rccr; - u8 res1[14]; - u16 cp_rter; - u8 res2[2]; - u16 cp_rtmr; - u16 cp_rtscr; - u8 res3[2]; - u32 cp_rtsr; - u8 res4[12]; -} cpm_cpm2_t; - -/* USB Controller. -*/ -typedef struct usb_ctlr { - u8 usb_usmod; - u8 usb_usadr; - u8 usb_uscom; - u8 res1[1]; - u16 usb_usep1; - u16 usb_usep2; - u16 usb_usep3; - u16 usb_usep4; - u8 res2[4]; - u16 usb_usber; - u8 res3[2]; - u16 usb_usbmr; - u8 usb_usbs; - u8 res4[7]; -} usb_cpm2_t; - -/* ...and the whole thing wrapped up.... -*/ - -typedef struct immap { - /* Some references are into the unique and known dpram spaces, - * others are from the generic base. - */ -#define im_dprambase im_dpram1 - u8 im_dpram1[16*1024]; - u8 res1[16*1024]; - u8 im_dpram2[4*1024]; - u8 res2[8*1024]; - u8 im_dpram3[4*1024]; - u8 res3[16*1024]; - - sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ - memctl_cpm2_t im_memctl; /* Memory Controller */ - sit_cpm2_t im_sit; /* System Integration Timers */ - pci_cpm2_t im_pci; /* PCI Controller */ - intctl_cpm2_t im_intctl; /* Interrupt Controller */ - car_cpm2_t im_clkrst; /* Clocks and reset */ - iop_cpm2_t im_ioport; /* IO Port control/status */ - cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ - sdma_cpm2_t im_sdma; /* SDMA control/status */ - - fcc_t im_fcc[3]; /* Three FCCs */ - u8 res4z[32]; - fcc_c_t im_fcc_c[3]; /* Continued FCCs */ - - u8 res4[32]; - - tclayer_t im_tclayer[8]; /* Eight TCLayers */ - u16 tc_tcgsr; - u16 tc_tcger; - - /* First set of baud rate generators. - */ - u8 res[236]; - u32 im_brgc5; - u32 im_brgc6; - u32 im_brgc7; - u32 im_brgc8; - - u8 res5[608]; - - i2c_cpm2_t im_i2c; /* I2C control/status */ - cpm_cpm2_t im_cpm; /* Communication processor */ - - /* Second set of baud rate generators. - */ - u32 im_brgc1; - u32 im_brgc2; - u32 im_brgc3; - u32 im_brgc4; - - scc_t im_scc[4]; /* Four SCCs */ - smc_t im_smc[2]; /* Couple of SMCs */ - spictl_cpm2_t im_spi; /* A SPI */ - cpmux_t im_cpmux; /* CPM clock route mux */ - siramctl_t im_siramctl1; /* First SI RAM Control */ - mcc_t im_mcc1; /* First MCC */ - siramctl_t im_siramctl2; /* Second SI RAM Control */ - mcc_t im_mcc2; /* Second MCC */ - usb_cpm2_t im_usb; /* USB Controller */ - - u8 res6[1153]; - - u16 im_si1txram[256]; - u8 res7[512]; - u16 im_si1rxram[256]; - u8 res8[512]; - u16 im_si2txram[256]; - u8 res9[512]; - u16 im_si2rxram[256]; - u8 res10[512]; - u8 res11[4096]; -} cpm2_map_t; - -extern cpm2_map_t __iomem *cpm2_immr; - -#endif /* __IMMAP_CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h deleted file mode 100644 index 7b6f411db3e6..000000000000 --- a/include/asm-powerpc/immap_qe.h +++ /dev/null @@ -1,485 +0,0 @@ -/* - * include/asm-powerpc/immap_qe.h - * - * QUICC Engine (QE) Internal Memory Map. - * The Internal Memory Map for devices with QE on them. This - * is the superset of all QE devices (8360, etc.). - - * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_IMMAP_QE_H -#define _ASM_POWERPC_IMMAP_QE_H -#ifdef __KERNEL__ - -#include -#include - -#define QE_IMMAP_SIZE (1024 * 1024) /* 1MB from 1MB+IMMR */ - -/* QE I-RAM */ -struct qe_iram { - __be32 iadd; /* I-RAM Address Register */ - __be32 idata; /* I-RAM Data Register */ - u8 res0[0x78]; -} __attribute__ ((packed)); - -/* QE Interrupt Controller */ -struct qe_ic_regs { - __be32 qicr; - __be32 qivec; - __be32 qripnr; - __be32 qipnr; - __be32 qipxcc; - __be32 qipycc; - __be32 qipwcc; - __be32 qipzcc; - __be32 qimr; - __be32 qrimr; - __be32 qicnr; - u8 res0[0x4]; - __be32 qiprta; - __be32 qiprtb; - u8 res1[0x4]; - __be32 qricr; - u8 res2[0x20]; - __be32 qhivec; - u8 res3[0x1C]; -} __attribute__ ((packed)); - -/* Communications Processor */ -struct cp_qe { - __be32 cecr; /* QE command register */ - __be32 ceccr; /* QE controller configuration register */ - __be32 cecdr; /* QE command data register */ - u8 res0[0xA]; - __be16 ceter; /* QE timer event register */ - u8 res1[0x2]; - __be16 cetmr; /* QE timers mask register */ - __be32 cetscr; /* QE time-stamp timer control register */ - __be32 cetsr1; /* QE time-stamp register 1 */ - __be32 cetsr2; /* QE time-stamp register 2 */ - u8 res2[0x8]; - __be32 cevter; /* QE virtual tasks event register */ - __be32 cevtmr; /* QE virtual tasks mask register */ - __be16 cercr; /* QE RAM control register */ - u8 res3[0x2]; - u8 res4[0x24]; - __be16 ceexe1; /* QE external request 1 event register */ - u8 res5[0x2]; - __be16 ceexm1; /* QE external request 1 mask register */ - u8 res6[0x2]; - __be16 ceexe2; /* QE external request 2 event register */ - u8 res7[0x2]; - __be16 ceexm2; /* QE external request 2 mask register */ - u8 res8[0x2]; - __be16 ceexe3; /* QE external request 3 event register */ - u8 res9[0x2]; - __be16 ceexm3; /* QE external request 3 mask register */ - u8 res10[0x2]; - __be16 ceexe4; /* QE external request 4 event register */ - u8 res11[0x2]; - __be16 ceexm4; /* QE external request 4 mask register */ - u8 res12[0x3A]; - __be32 ceurnr; /* QE microcode revision number register */ - u8 res13[0x244]; -} __attribute__ ((packed)); - -/* QE Multiplexer */ -struct qe_mux { - __be32 cmxgcr; /* CMX general clock route register */ - __be32 cmxsi1cr_l; /* CMX SI1 clock route low register */ - __be32 cmxsi1cr_h; /* CMX SI1 clock route high register */ - __be32 cmxsi1syr; /* CMX SI1 SYNC route register */ - __be32 cmxucr[4]; /* CMX UCCx clock route registers */ - __be32 cmxupcr; /* CMX UPC clock route register */ - u8 res0[0x1C]; -} __attribute__ ((packed)); - -/* QE Timers */ -struct qe_timers { - u8 gtcfr1; /* Timer 1 and Timer 2 global config register*/ - u8 res0[0x3]; - u8 gtcfr2; /* Timer 3 and timer 4 global config register*/ - u8 res1[0xB]; - __be16 gtmdr1; /* Timer 1 mode register */ - __be16 gtmdr2; /* Timer 2 mode register */ - __be16 gtrfr1; /* Timer 1 reference register */ - __be16 gtrfr2; /* Timer 2 reference register */ - __be16 gtcpr1; /* Timer 1 capture register */ - __be16 gtcpr2; /* Timer 2 capture register */ - __be16 gtcnr1; /* Timer 1 counter */ - __be16 gtcnr2; /* Timer 2 counter */ - __be16 gtmdr3; /* Timer 3 mode register */ - __be16 gtmdr4; /* Timer 4 mode register */ - __be16 gtrfr3; /* Timer 3 reference register */ - __be16 gtrfr4; /* Timer 4 reference register */ - __be16 gtcpr3; /* Timer 3 capture register */ - __be16 gtcpr4; /* Timer 4 capture register */ - __be16 gtcnr3; /* Timer 3 counter */ - __be16 gtcnr4; /* Timer 4 counter */ - __be16 gtevr1; /* Timer 1 event register */ - __be16 gtevr2; /* Timer 2 event register */ - __be16 gtevr3; /* Timer 3 event register */ - __be16 gtevr4; /* Timer 4 event register */ - __be16 gtps; /* Timer 1 prescale register */ - u8 res2[0x46]; -} __attribute__ ((packed)); - -/* BRG */ -struct qe_brg { - __be32 brgc[16]; /* BRG configuration registers */ - u8 res0[0x40]; -} __attribute__ ((packed)); - -/* SPI */ -struct spi { - u8 res0[0x20]; - __be32 spmode; /* SPI mode register */ - u8 res1[0x2]; - u8 spie; /* SPI event register */ - u8 res2[0x1]; - u8 res3[0x2]; - u8 spim; /* SPI mask register */ - u8 res4[0x1]; - u8 res5[0x1]; - u8 spcom; /* SPI command register */ - u8 res6[0x2]; - __be32 spitd; /* SPI transmit data register (cpu mode) */ - __be32 spird; /* SPI receive data register (cpu mode) */ - u8 res7[0x8]; -} __attribute__ ((packed)); - -/* SI */ -struct si1 { - __be16 siamr1; /* SI1 TDMA mode register */ - __be16 sibmr1; /* SI1 TDMB mode register */ - __be16 sicmr1; /* SI1 TDMC mode register */ - __be16 sidmr1; /* SI1 TDMD mode register */ - u8 siglmr1_h; /* SI1 global mode register high */ - u8 res0[0x1]; - u8 sicmdr1_h; /* SI1 command register high */ - u8 res2[0x1]; - u8 sistr1_h; /* SI1 status register high */ - u8 res3[0x1]; - __be16 sirsr1_h; /* SI1 RAM shadow address register high */ - u8 sitarc1; /* SI1 RAM counter Tx TDMA */ - u8 sitbrc1; /* SI1 RAM counter Tx TDMB */ - u8 sitcrc1; /* SI1 RAM counter Tx TDMC */ - u8 sitdrc1; /* SI1 RAM counter Tx TDMD */ - u8 sirarc1; /* SI1 RAM counter Rx TDMA */ - u8 sirbrc1; /* SI1 RAM counter Rx TDMB */ - u8 sircrc1; /* SI1 RAM counter Rx TDMC */ - u8 sirdrc1; /* SI1 RAM counter Rx TDMD */ - u8 res4[0x8]; - __be16 siemr1; /* SI1 TDME mode register 16 bits */ - __be16 sifmr1; /* SI1 TDMF mode register 16 bits */ - __be16 sigmr1; /* SI1 TDMG mode register 16 bits */ - __be16 sihmr1; /* SI1 TDMH mode register 16 bits */ - u8 siglmg1_l; /* SI1 global mode register low 8 bits */ - u8 res5[0x1]; - u8 sicmdr1_l; /* SI1 command register low 8 bits */ - u8 res6[0x1]; - u8 sistr1_l; /* SI1 status register low 8 bits */ - u8 res7[0x1]; - __be16 sirsr1_l; /* SI1 RAM shadow address register low 16 bits*/ - u8 siterc1; /* SI1 RAM counter Tx TDME 8 bits */ - u8 sitfrc1; /* SI1 RAM counter Tx TDMF 8 bits */ - u8 sitgrc1; /* SI1 RAM counter Tx TDMG 8 bits */ - u8 sithrc1; /* SI1 RAM counter Tx TDMH 8 bits */ - u8 sirerc1; /* SI1 RAM counter Rx TDME 8 bits */ - u8 sirfrc1; /* SI1 RAM counter Rx TDMF 8 bits */ - u8 sirgrc1; /* SI1 RAM counter Rx TDMG 8 bits */ - u8 sirhrc1; /* SI1 RAM counter Rx TDMH 8 bits */ - u8 res8[0x8]; - __be32 siml1; /* SI1 multiframe limit register */ - u8 siedm1; /* SI1 extended diagnostic mode register */ - u8 res9[0xBB]; -} __attribute__ ((packed)); - -/* SI Routing Tables */ -struct sir { - u8 tx[0x400]; - u8 rx[0x400]; - u8 res0[0x800]; -} __attribute__ ((packed)); - -/* USB Controller */ -struct usb_ctlr { - u8 usb_usmod; - u8 usb_usadr; - u8 usb_uscom; - u8 res1[1]; - __be16 usb_usep1; - __be16 usb_usep2; - __be16 usb_usep3; - __be16 usb_usep4; - u8 res2[4]; - __be16 usb_usber; - u8 res3[2]; - __be16 usb_usbmr; - u8 res4[1]; - u8 usb_usbs; - __be16 usb_ussft; - u8 res5[2]; - __be16 usb_usfrn; - u8 res6[0x22]; -} __attribute__ ((packed)); - -/* MCC */ -struct mcc { - __be32 mcce; /* MCC event register */ - __be32 mccm; /* MCC mask register */ - __be32 mccf; /* MCC configuration register */ - __be32 merl; /* MCC emergency request level register */ - u8 res0[0xF0]; -} __attribute__ ((packed)); - -/* QE UCC Slow */ -struct ucc_slow { - __be32 gumr_l; /* UCCx general mode register (low) */ - __be32 gumr_h; /* UCCx general mode register (high) */ - __be16 upsmr; /* UCCx protocol-specific mode register */ - u8 res0[0x2]; - __be16 utodr; /* UCCx transmit on demand register */ - __be16 udsr; /* UCCx data synchronization register */ - __be16 ucce; /* UCCx event register */ - u8 res1[0x2]; - __be16 uccm; /* UCCx mask register */ - u8 res2[0x1]; - u8 uccs; /* UCCx status register */ - u8 res3[0x24]; - __be16 utpt; - u8 res4[0x52]; - u8 guemr; /* UCC general extended mode register */ -} __attribute__ ((packed)); - -/* QE UCC Fast */ -struct ucc_fast { - __be32 gumr; /* UCCx general mode register */ - __be32 upsmr; /* UCCx protocol-specific mode register */ - __be16 utodr; /* UCCx transmit on demand register */ - u8 res0[0x2]; - __be16 udsr; /* UCCx data synchronization register */ - u8 res1[0x2]; - __be32 ucce; /* UCCx event register */ - __be32 uccm; /* UCCx mask register */ - u8 uccs; /* UCCx status register */ - u8 res2[0x7]; - __be32 urfb; /* UCC receive FIFO base */ - __be16 urfs; /* UCC receive FIFO size */ - u8 res3[0x2]; - __be16 urfet; /* UCC receive FIFO emergency threshold */ - __be16 urfset; /* UCC receive FIFO special emergency - threshold */ - __be32 utfb; /* UCC transmit FIFO base */ - __be16 utfs; /* UCC transmit FIFO size */ - u8 res4[0x2]; - __be16 utfet; /* UCC transmit FIFO emergency threshold */ - u8 res5[0x2]; - __be16 utftt; /* UCC transmit FIFO transmit threshold */ - u8 res6[0x2]; - __be16 utpt; /* UCC transmit polling timer */ - u8 res7[0x2]; - __be32 urtry; /* UCC retry counter register */ - u8 res8[0x4C]; - u8 guemr; /* UCC general extended mode register */ -} __attribute__ ((packed)); - -struct ucc { - union { - struct ucc_slow slow; - struct ucc_fast fast; - u8 res[0x200]; /* UCC blocks are 512 bytes each */ - }; -} __attribute__ ((packed)); - -/* MultiPHY UTOPIA POS Controllers (UPC) */ -struct upc { - __be32 upgcr; /* UTOPIA/POS general configuration register */ - __be32 uplpa; /* UTOPIA/POS last PHY address */ - __be32 uphec; /* ATM HEC register */ - __be32 upuc; /* UTOPIA/POS UCC configuration */ - __be32 updc1; /* UTOPIA/POS device 1 configuration */ - __be32 updc2; /* UTOPIA/POS device 2 configuration */ - __be32 updc3; /* UTOPIA/POS device 3 configuration */ - __be32 updc4; /* UTOPIA/POS device 4 configuration */ - __be32 upstpa; /* UTOPIA/POS STPA threshold */ - u8 res0[0xC]; - __be32 updrs1_h; /* UTOPIA/POS device 1 rate select */ - __be32 updrs1_l; /* UTOPIA/POS device 1 rate select */ - __be32 updrs2_h; /* UTOPIA/POS device 2 rate select */ - __be32 updrs2_l; /* UTOPIA/POS device 2 rate select */ - __be32 updrs3_h; /* UTOPIA/POS device 3 rate select */ - __be32 updrs3_l; /* UTOPIA/POS device 3 rate select */ - __be32 updrs4_h; /* UTOPIA/POS device 4 rate select */ - __be32 updrs4_l; /* UTOPIA/POS device 4 rate select */ - __be32 updrp1; /* UTOPIA/POS device 1 receive priority low */ - __be32 updrp2; /* UTOPIA/POS device 2 receive priority low */ - __be32 updrp3; /* UTOPIA/POS device 3 receive priority low */ - __be32 updrp4; /* UTOPIA/POS device 4 receive priority low */ - __be32 upde1; /* UTOPIA/POS device 1 event */ - __be32 upde2; /* UTOPIA/POS device 2 event */ - __be32 upde3; /* UTOPIA/POS device 3 event */ - __be32 upde4; /* UTOPIA/POS device 4 event */ - __be16 uprp1; - __be16 uprp2; - __be16 uprp3; - __be16 uprp4; - u8 res1[0x8]; - __be16 uptirr1_0; /* Device 1 transmit internal rate 0 */ - __be16 uptirr1_1; /* Device 1 transmit internal rate 1 */ - __be16 uptirr1_2; /* Device 1 transmit internal rate 2 */ - __be16 uptirr1_3; /* Device 1 transmit internal rate 3 */ - __be16 uptirr2_0; /* Device 2 transmit internal rate 0 */ - __be16 uptirr2_1; /* Device 2 transmit internal rate 1 */ - __be16 uptirr2_2; /* Device 2 transmit internal rate 2 */ - __be16 uptirr2_3; /* Device 2 transmit internal rate 3 */ - __be16 uptirr3_0; /* Device 3 transmit internal rate 0 */ - __be16 uptirr3_1; /* Device 3 transmit internal rate 1 */ - __be16 uptirr3_2; /* Device 3 transmit internal rate 2 */ - __be16 uptirr3_3; /* Device 3 transmit internal rate 3 */ - __be16 uptirr4_0; /* Device 4 transmit internal rate 0 */ - __be16 uptirr4_1; /* Device 4 transmit internal rate 1 */ - __be16 uptirr4_2; /* Device 4 transmit internal rate 2 */ - __be16 uptirr4_3; /* Device 4 transmit internal rate 3 */ - __be32 uper1; /* Device 1 port enable register */ - __be32 uper2; /* Device 2 port enable register */ - __be32 uper3; /* Device 3 port enable register */ - __be32 uper4; /* Device 4 port enable register */ - u8 res2[0x150]; -} __attribute__ ((packed)); - -/* SDMA */ -struct sdma { - __be32 sdsr; /* Serial DMA status register */ - __be32 sdmr; /* Serial DMA mode register */ - __be32 sdtr1; /* SDMA system bus threshold register */ - __be32 sdtr2; /* SDMA secondary bus threshold register */ - __be32 sdhy1; /* SDMA system bus hysteresis register */ - __be32 sdhy2; /* SDMA secondary bus hysteresis register */ - __be32 sdta1; /* SDMA system bus address register */ - __be32 sdta2; /* SDMA secondary bus address register */ - __be32 sdtm1; /* SDMA system bus MSNUM register */ - __be32 sdtm2; /* SDMA secondary bus MSNUM register */ - u8 res0[0x10]; - __be32 sdaqr; /* SDMA address bus qualify register */ - __be32 sdaqmr; /* SDMA address bus qualify mask register */ - u8 res1[0x4]; - __be32 sdebcr; /* SDMA CAM entries base register */ - u8 res2[0x38]; -} __attribute__ ((packed)); - -/* Debug Space */ -struct dbg { - __be32 bpdcr; /* Breakpoint debug command register */ - __be32 bpdsr; /* Breakpoint debug status register */ - __be32 bpdmr; /* Breakpoint debug mask register */ - __be32 bprmrr0; /* Breakpoint request mode risc register 0 */ - __be32 bprmrr1; /* Breakpoint request mode risc register 1 */ - u8 res0[0x8]; - __be32 bprmtr0; /* Breakpoint request mode trb register 0 */ - __be32 bprmtr1; /* Breakpoint request mode trb register 1 */ - u8 res1[0x8]; - __be32 bprmir; /* Breakpoint request mode immediate register */ - __be32 bprmsr; /* Breakpoint request mode serial register */ - __be32 bpemr; /* Breakpoint exit mode register */ - u8 res2[0x48]; -} __attribute__ ((packed)); - -/* - * RISC Special Registers (Trap and Breakpoint). These are described in - * the QE Developer's Handbook. - */ -struct rsp { - __be32 tibcr[16]; /* Trap/instruction breakpoint control regs */ - u8 res0[64]; - __be32 ibcr0; - __be32 ibs0; - __be32 ibcnr0; - u8 res1[4]; - __be32 ibcr1; - __be32 ibs1; - __be32 ibcnr1; - __be32 npcr; - __be32 dbcr; - __be32 dbar; - __be32 dbamr; - __be32 dbsr; - __be32 dbcnr; - u8 res2[12]; - __be32 dbdr_h; - __be32 dbdr_l; - __be32 dbdmr_h; - __be32 dbdmr_l; - __be32 bsr; - __be32 bor; - __be32 bior; - u8 res3[4]; - __be32 iatr[4]; - __be32 eccr; /* Exception control configuration register */ - __be32 eicr; - u8 res4[0x100-0xf8]; -} __attribute__ ((packed)); - -struct qe_immap { - struct qe_iram iram; /* I-RAM */ - struct qe_ic_regs ic; /* Interrupt Controller */ - struct cp_qe cp; /* Communications Processor */ - struct qe_mux qmx; /* QE Multiplexer */ - struct qe_timers qet; /* QE Timers */ - struct spi spi[0x2]; /* spi */ - struct mcc mcc; /* mcc */ - struct qe_brg brg; /* brg */ - struct usb_ctlr usb; /* USB */ - struct si1 si1; /* SI */ - u8 res11[0x800]; - struct sir sir; /* SI Routing Tables */ - struct ucc ucc1; /* ucc1 */ - struct ucc ucc3; /* ucc3 */ - struct ucc ucc5; /* ucc5 */ - struct ucc ucc7; /* ucc7 */ - u8 res12[0x600]; - struct upc upc1; /* MultiPHY UTOPIA POS Ctrlr 1*/ - struct ucc ucc2; /* ucc2 */ - struct ucc ucc4; /* ucc4 */ - struct ucc ucc6; /* ucc6 */ - struct ucc ucc8; /* ucc8 */ - u8 res13[0x600]; - struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/ - struct sdma sdma; /* SDMA */ - struct dbg dbg; /* 0x104080 - 0x1040FF - Debug Space */ - struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF - RISC Special Registers - (Trap and Breakpoint) */ - u8 res14[0x300]; /* 0x104300 - 0x1045FF */ - u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */ - u8 res16[0x8000]; /* 0x108000 - 0x110000 */ - u8 muram[0xC000]; /* 0x110000 - 0x11C000 - Multi-user RAM */ - u8 res17[0x24000]; /* 0x11C000 - 0x140000 */ - u8 res18[0xC0000]; /* 0x140000 - 0x200000 */ -} __attribute__ ((packed)); - -extern struct qe_immap __iomem *qe_immr; -extern phys_addr_t get_qe_base(void); - -static inline unsigned long immrbar_virt_to_phys(void *address) -{ - if ( ((u32)address >= (u32)qe_immr) && - ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) - return (unsigned long)(address - (u32)qe_immr + - (u32)get_qe_base()); - return (unsigned long)virt_to_phys(address); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_IMMAP_QE_H */ diff --git a/include/asm-powerpc/io-defs.h b/include/asm-powerpc/io-defs.h deleted file mode 100644 index 44d7927aec69..000000000000 --- a/include/asm-powerpc/io-defs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* This file is meant to be include multiple times by other headers */ -/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */ - -DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) - -#ifdef __powerpc64__ -DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) -DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) -#endif /* __powerpc64__ */ - -DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) -DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port) -DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port) -DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port) -DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port) -DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port) - -DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) -DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), - (a, b, c), mem, a) - -DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) -DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), - (p, b, c), pio, p) - -DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), - (a, c, n), mem, a) -DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n), - (d, s, n), mem, s) -DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n), - (d, s, n), mem, d) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h deleted file mode 100644 index 77c7fa025e65..000000000000 --- a/include/asm-powerpc/io.h +++ /dev/null @@ -1,787 +0,0 @@ -#ifndef _ASM_POWERPC_IO_H -#define _ASM_POWERPC_IO_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Check of existence of legacy devices */ -extern int check_legacy_ioport(unsigned long base_port); -#define I8042_DATA_REG 0x60 -#define FDC_BASE 0x3f0 -/* only relevant for PReP */ -#define _PIDXR 0x279 -#define _PNPWRP 0xa79 -#define PNPBIOS_BASE 0xf000 - -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#ifdef CONFIG_PPC64 -#include -#endif - -#define SIO_CONFIG_RA 0x398 -#define SIO_CONFIG_RD 0x399 - -#define SLOW_DOWN_IO - -/* 32 bits uses slightly different variables for the various IO - * bases. Most of this file only uses _IO_BASE though which we - * define properly based on the platform - */ -#ifndef CONFIG_PCI -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#elif defined(CONFIG_PPC32) -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset -#else -#define _IO_BASE pci_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET 0 -#endif - -extern unsigned long isa_io_base; -extern unsigned long pci_io_base; -extern unsigned long pci_dram_offset; - -extern resource_size_t isa_mem_base; - -#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) -#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits -#endif - -/* - * - * Low level MMIO accessors - * - * This provides the non-bus specific accessors to MMIO. Those are PowerPC - * specific and thus shouldn't be used in generic code. The accessors - * provided here are: - * - * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 - * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 - * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns - * - * Those operate directly on a kernel virtual address. Note that the prototype - * for the out_* accessors has the arguments in opposite order from the usual - * linux PCI accessors. Unlike those, they take the address first and the value - * next. - * - * Note: I might drop the _ns suffix on the stream operations soon as it is - * simply normal for stream operations to not swap in the first place. - * - */ - -#ifdef CONFIG_PPC64 -#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) -#else -#define IO_SET_SYNC_FLAG() -#endif - -/* gcc 4.0 and older doesn't have 'Z' constraint */ -#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) -#define DEF_MMIO_IN_LE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ - : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_LE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn" %1,0,%2" \ - : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} -#else /* newer gcc */ -#define DEF_MMIO_IN_LE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ - : "=r" (ret) : "Z" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_LE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn" %1,%y0" \ - : "=Z" (*addr) : "r" (val) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} -#endif - -#define DEF_MMIO_IN_BE(name, size, insn) \ -static inline u##size name(const volatile u##size __iomem *addr) \ -{ \ - u##size ret; \ - __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ - : "=r" (ret) : "m" (*addr) : "memory"); \ - return ret; \ -} - -#define DEF_MMIO_OUT_BE(name, size, insn) \ -static inline void name(volatile u##size __iomem *addr, u##size val) \ -{ \ - __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ - : "=m" (*addr) : "r" (val) : "memory"); \ - IO_SET_SYNC_FLAG(); \ -} - - -DEF_MMIO_IN_BE(in_8, 8, lbz); -DEF_MMIO_IN_BE(in_be16, 16, lhz); -DEF_MMIO_IN_BE(in_be32, 32, lwz); -DEF_MMIO_IN_LE(in_le16, 16, lhbrx); -DEF_MMIO_IN_LE(in_le32, 32, lwbrx); - -DEF_MMIO_OUT_BE(out_8, 8, stb); -DEF_MMIO_OUT_BE(out_be16, 16, sth); -DEF_MMIO_OUT_BE(out_be32, 32, stw); -DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); -DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); - -#ifdef __powerpc64__ -DEF_MMIO_OUT_BE(out_be64, 64, std); -DEF_MMIO_IN_BE(in_be64, 64, ld); - -/* There is no asm instructions for 64 bits reverse loads and stores */ -static inline u64 in_le64(const volatile u64 __iomem *addr) -{ - return swab64(in_be64(addr)); -} - -static inline void out_le64(volatile u64 __iomem *addr, u64 val) -{ - out_be64(addr, swab64(val)); -} -#endif /* __powerpc64__ */ - -/* - * Low level IO stream instructions are defined out of line for now - */ -extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); -extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); -extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); -extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); - -/* The _ns naming is historical and will be removed. For now, just #define - * the non _ns equivalent names - */ -#define _insw _insw_ns -#define _insl _insl_ns -#define _outsw _outsw_ns -#define _outsl _outsl_ns - - -/* - * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line - */ - -extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); -extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n); -extern void _memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n); - -/* - * - * PCI and standard ISA accessors - * - * Those are globally defined linux accessors for devices on PCI or ISA - * busses. They follow the Linux defined semantics. The current implementation - * for PowerPC is as close as possible to the x86 version of these, and thus - * provides fairly heavy weight barriers for the non-raw versions - * - * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO - * allowing the platform to provide its own implementation of some or all - * of the accessors. - */ - -/* - * Include the EEH definitions when EEH is enabled only so they don't get - * in the way when building for 32 bits - */ -#ifdef CONFIG_EEH -#include -#endif - -/* Shortcut to the MMIO argument pointer */ -#define PCI_IO_ADDR volatile void __iomem * - -/* Indirect IO address tokens: - * - * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks - * on all IOs. (Note that this is all 64 bits only for now) - * - * To help platforms who may need to differenciate MMIO addresses in - * their hooks, a bitfield is reserved for use by the platform near the - * top of MMIO addresses (not PIO, those have to cope the hard way). - * - * This bit field is 12 bits and is at the top of the IO virtual - * addresses PCI_IO_INDIRECT_TOKEN_MASK. - * - * The kernel virtual space is thus: - * - * 0xD000000000000000 : vmalloc - * 0xD000080000000000 : PCI PHB IO space - * 0xD000080080000000 : ioremap - * 0xD0000fffffffffff : end of ioremap region - * - * Since the top 4 bits are reserved as the region ID, we use thus - * the next 12 bits and keep 4 bits available for the future if the - * virtual address space is ever to be extended. - * - * The direct IO mapping operations will then mask off those bits - * before doing the actual access, though that only happen when - * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that - * mechanism - */ - -#ifdef CONFIG_PPC_INDIRECT_IO -#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul -#define PCI_IO_IND_TOKEN_SHIFT 48 -#define PCI_FIX_ADDR(addr) \ - ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) -#define PCI_GET_ADDR_TOKEN(addr) \ - (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ - PCI_IO_IND_TOKEN_SHIFT) -#define PCI_SET_ADDR_TOKEN(addr, token) \ -do { \ - unsigned long __a = (unsigned long)(addr); \ - __a &= ~PCI_IO_IND_TOKEN_MASK; \ - __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ - (addr) = (void __iomem *)__a; \ -} while(0) -#else -#define PCI_FIX_ADDR(addr) (addr) -#endif - - -/* - * Non ordered and non-swapping "raw" accessors - */ - -static inline unsigned char __raw_readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); -} -static inline unsigned short __raw_readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); -} -static inline unsigned int __raw_readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); -} -static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; -} -static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; -} -static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; -} - -#ifdef __powerpc64__ -static inline unsigned long __raw_readq(const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); -} -static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; -} -#endif /* __powerpc64__ */ - -/* - * - * PCI PIO and MMIO accessors. - * - * - * On 32 bits, PIO operations have a recovery mechanism in case they trigger - * machine checks (which they occasionally do when probing non existing - * IO ports on some platforms, like PowerMac and 8xx). - * I always found it to be of dubious reliability and I am tempted to get - * rid of it one of these days. So if you think it's important to keep it, - * please voice up asap. We never had it for 64 bits and I do not intend - * to port it over - */ - -#ifdef CONFIG_PPC32 - -#define __do_in_asm(name, op) \ -static inline unsigned int name(unsigned int port) \ -{ \ - unsigned int x; \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: twi 0,%0,0\n" \ - "2: isync\n" \ - "3: nop\n" \ - "4:\n" \ - ".section .fixup,\"ax\"\n" \ - "5: li %0,-1\n" \ - " b 4b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,5b\n" \ - " .long 1b,5b\n" \ - " .long 2b,5b\n" \ - " .long 3b,5b\n" \ - ".previous" \ - : "=&r" (x) \ - : "r" (port + _IO_BASE) \ - : "memory"); \ - return x; \ -} - -#define __do_out_asm(name, op) \ -static inline void name(unsigned int val, unsigned int port) \ -{ \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: sync\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,2b\n" \ - " .long 1b,2b\n" \ - ".previous" \ - : : "r" (val), "r" (port + _IO_BASE) \ - : "memory"); \ -} - -__do_in_asm(_rec_inb, "lbzx") -__do_in_asm(_rec_inw, "lhbrx") -__do_in_asm(_rec_inl, "lwbrx") -__do_out_asm(_rec_outb, "stbx") -__do_out_asm(_rec_outw, "sthbrx") -__do_out_asm(_rec_outl, "stwbrx") - -#endif /* CONFIG_PPC32 */ - -/* The "__do_*" operations below provide the actual "base" implementation - * for each of the defined acccessor. Some of them use the out_* functions - * directly, some of them still use EEH, though we might change that in the - * future. Those macros below provide the necessary argument swapping and - * handling of the IO base for PIO. - * - * They are themselves used by the macros that define the actual accessors - * and can be used by the hooks if any. - * - * Note that PIO operations are always defined in terms of their corresonding - * MMIO operations. That allows platforms like iSeries who want to modify the - * behaviour of both to only hook on the MMIO version and get both. It's also - * possible to hook directly at the toplevel PIO operation if they have to - * be handled differently - */ -#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) -#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) -#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) -#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) -#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) -#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) -#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) - -#ifdef CONFIG_EEH -#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) -#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) -#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) -#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) -#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) -#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) -#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) -#else /* CONFIG_EEH */ -#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) -#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) -#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) -#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) -#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) -#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) -#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) -#endif /* !defined(CONFIG_EEH) */ - -#ifdef CONFIG_PPC32 -#define __do_outb(val, port) _rec_outb(val, port) -#define __do_outw(val, port) _rec_outw(val, port) -#define __do_outl(val, port) _rec_outl(val, port) -#define __do_inb(port) _rec_inb(port) -#define __do_inw(port) _rec_inw(port) -#define __do_inl(port) _rec_inl(port) -#else /* CONFIG_PPC32 */ -#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); -#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); -#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); -#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); -#endif /* !CONFIG_PPC32 */ - -#ifdef CONFIG_EEH -#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) -#else /* CONFIG_EEH */ -#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) -#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) -#endif /* !CONFIG_EEH */ -#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) -#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) -#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) - -#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) -#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) -#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) -#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) - -#define __do_memset_io(addr, c, n) \ - _memset_io(PCI_FIX_ADDR(addr), c, n) -#define __do_memcpy_toio(dst, src, n) \ - _memcpy_toio(PCI_FIX_ADDR(dst), src, n) - -#ifdef CONFIG_EEH -#define __do_memcpy_fromio(dst, src, n) \ - eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) -#else /* CONFIG_EEH */ -#define __do_memcpy_fromio(dst, src, n) \ - _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) -#endif /* !CONFIG_EEH */ - -#ifdef CONFIG_PPC_INDIRECT_IO -#define DEF_PCI_HOOK(x) x -#else -#define DEF_PCI_HOOK(x) NULL -#endif - -/* Structure containing all the hooks */ -extern struct ppc_pci_io { - -#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; -#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; - -#include - -#undef DEF_PCI_AC_RET -#undef DEF_PCI_AC_NORET - -} ppc_pci_io; - -/* The inline wrappers */ -#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ -static inline ret name at \ -{ \ - if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ - return ppc_pci_io.name al; \ - return __do_##name al; \ -} - -#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ -static inline void name at \ -{ \ - if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ - ppc_pci_io.name al; \ - else \ - __do_##name al; \ -} - -#include - -#undef DEF_PCI_AC_RET -#undef DEF_PCI_AC_NORET - -/* Some drivers check for the presence of readq & writeq with - * a #ifdef, so we make them happy here. - */ -#ifdef __powerpc64__ -#define readq readq -#define writeq writeq -#endif - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* - * We don't do relaxed operations yet, at least not with this semantic - */ -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define readq_relaxed(addr) readq(addr) - -#ifdef CONFIG_PPC32 -#define mmiowb() -#else -/* - * Enforce synchronisation of stores vs. spin_unlock - * (this does it explicitly, though our implementation of spin_unlock - * does it implicitely too) - */ -static inline void mmiowb(void) -{ - unsigned long tmp; - - __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)" - : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) - : "memory"); -} -#endif /* !CONFIG_PPC32 */ - -static inline void iosync(void) -{ - __asm__ __volatile__ ("sync" : : : "memory"); -} - -/* Enforce in-order execution of data I/O. - * No distinction between read/write on PPC; use eieio for all three. - * Those are fairly week though. They don't provide a barrier between - * MMIO and cacheable storage nor do they provide a barrier vs. locks, - * they only provide barriers between 2 __raw MMIO operations and - * possibly break write combining. - */ -#define iobarrier_rw() eieio() -#define iobarrier_r() eieio() -#define iobarrier_w() eieio() - - -/* - * output pause versions need a delay at least for the - * w83c105 ide controller in a p610. - */ -#define inb_p(port) inb(port) -#define outb_p(val, port) (udelay(1), outb((val), (port))) -#define inw_p(port) inw(port) -#define outw_p(val, port) (udelay(1), outw((val), (port))) -#define inl_p(port) inl(port) -#define outl_p(val, port) (udelay(1), outl((val), (port))) - - -#define IO_SPACE_LIMIT ~(0UL) - - -/** - * ioremap - map bus memory into CPU space - * @address: bus address of the memory - * @size: size of the resource to map - * - * ioremap performs a platform specific sequence of operations to - * make bus memory CPU accessible via the readb/readw/readl/writeb/ - * writew/writel functions and the other mmio helpers. The returned - * address is not guaranteed to be usable directly as a virtual - * address. - * - * We provide a few variations of it: - * - * * ioremap is the standard one and provides non-cacheable guarded mappings - * and can be hooked by the platform via ppc_md - * - * * ioremap_flags allows to specify the page flags as an argument and can - * also be hooked by the platform via ppc_md. ioremap_prot is the exact - * same thing as ioremap_flags. - * - * * ioremap_nocache is identical to ioremap - * - * * iounmap undoes such a mapping and can be hooked - * - * * __ioremap_at (and the pending __iounmap_at) are low level functions to - * create hand-made mappings for use only by the PCI code and cannot - * currently be hooked. Must be page aligned. - * - * * __ioremap is the low level implementation used by ioremap and - * ioremap_flags and cannot be hooked (but can be used by a hook on one - * of the previous ones) - * - * * __iounmap, is the low level implementation used by iounmap and cannot - * be hooked (but can be used by a hook on iounmap) - * - */ -extern void __iomem *ioremap(phys_addr_t address, unsigned long size); -extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, - unsigned long flags); -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) - -extern void iounmap(volatile void __iomem *addr); - -extern void __iomem *__ioremap(phys_addr_t, unsigned long size, - unsigned long flags); -extern void __iounmap(volatile void __iomem *addr); - -extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea, - unsigned long size, unsigned long flags); -extern void __iounmap_at(void *ea, unsigned long size); - -/* - * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation - * which needs some additional definitions here. They basically allow PIO - * space overall to be 1GB. This will work as long as we never try to use - * iomap to map MMIO below 1GB which should be fine on ppc64 - */ -#define HAVE_ARCH_PIO_SIZE 1 -#define PIO_OFFSET 0x00000000UL -#define PIO_MASK (FULL_IO_SIZE - 1) -#define PIO_RESERVED (FULL_IO_SIZE) - -#define mmio_read16be(addr) readw_be(addr) -#define mmio_read32be(addr) readl_be(addr) -#define mmio_write16be(val, addr) writew_be(val, addr) -#define mmio_write32be(val, addr) writel_be(val, addr) -#define mmio_insb(addr, dst, count) readsb(addr, dst, count) -#define mmio_insw(addr, dst, count) readsw(addr, dst, count) -#define mmio_insl(addr, dst, count) readsl(addr, dst, count) -#define mmio_outsb(addr, src, count) writesb(addr, src, count) -#define mmio_outsw(addr, src, count) writesw(addr, src, count) -#define mmio_outsl(addr, src, count) writesl(addr, src, count) - -/** - * virt_to_phys - map virtual addresses to physical - * @address: address to remap - * - * The returned physical address is the physical (CPU) mapping for - * the memory address given. It is only valid to use this function on - * addresses directly mapped or allocated via kmalloc. - * - * This function does not give bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline unsigned long virt_to_phys(volatile void * address) -{ - return __pa((unsigned long)address); -} - -/** - * phys_to_virt - map physical address to virtual - * @address: address to remap - * - * The returned virtual address is a current CPU mapping for - * the memory address given. It is only valid to use this function on - * addresses that have a kernel mapping - * - * This function does not handle bus mappings for DMA transfers. In - * almost all conceivable cases a device driver should not be using - * this function - */ -static inline void * phys_to_virt(unsigned long address) -{ - return (void *)__va(address); -} - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) - -/* We do NOT want virtual merging, it would put too much pressure on - * our iommu allocator. Instead, we want drivers to be smart enough - * to coalesce sglists that happen to have been mapped in a contiguous - * way by the iommu - */ -#define BIO_VMERGE_BOUNDARY 0 - -/* - * 32 bits still uses virt_to_bus() for it's implementation of DMA - * mappings se we have to keep it defined here. We also have some old - * drivers (shame shame shame) that use bus_to_virt() and haven't been - * fixed yet so I need to define it here. - */ -#ifdef CONFIG_PPC32 - -static inline unsigned long virt_to_bus(volatile void * address) -{ - if (address == NULL) - return 0; - return __pa(address) + PCI_DRAM_OFFSET; -} - -static inline void * bus_to_virt(unsigned long address) -{ - if (address == 0) - return NULL; - return __va(address - PCI_DRAM_OFFSET); -} - -#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) - -#endif /* CONFIG_PPC32 */ - -/* access ports */ -#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) -#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) - -#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) -#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) - -#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) -#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) - -/* Clear and set bits in one shot. These macros can be used to clear and - * set multiple bits in a register using a single read-modify-write. These - * macros can also be used to set a multiple-bit bit pattern using a mask, - * by specifying the mask in the 'clear' parameter and the new bit pattern - * in the 'set' parameter. - */ - -#define clrsetbits(type, addr, clear, set) \ - out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) - -#ifdef __powerpc64__ -#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) -#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) -#endif - -#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) -#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) - -#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) -#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) - -#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) - -void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, - size_t size, unsigned long flags); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h deleted file mode 100644 index 57d68304218b..000000000000 --- a/include/asm-powerpc/ioctl.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ASM_POWERPC_IOCTL_H -#define _ASM_POWERPC_IOCTL_H - -#define _IOC_SIZEBITS 13 -#define _IOC_DIRBITS 3 - -#define _IOC_NONE 1U -#define _IOC_READ 2U -#define _IOC_WRITE 4U - -#include - -#endif /* _ASM_POWERPC_IOCTL_H */ diff --git a/include/asm-powerpc/ioctls.h b/include/asm-powerpc/ioctls.h deleted file mode 100644 index 279a6229584b..000000000000 --- a/include/asm-powerpc/ioctls.h +++ /dev/null @@ -1,110 +0,0 @@ -#ifndef _ASM_POWERPC_IOCTLS_H -#define _ASM_POWERPC_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TIOCGETP _IOR('t', 8, struct sgttyb) -#define TIOCSETP _IOW('t', 9, struct sgttyb) -#define TIOCSETN _IOW('t', 10, struct sgttyb) /* TIOCSETP wo flush */ - -#define TIOCSETC _IOW('t', 17, struct tchars) -#define TIOCGETC _IOR('t', 18, struct tchars) -#define TCGETS _IOR('t', 19, struct termios) -#define TCSETS _IOW('t', 20, struct termios) -#define TCSETSW _IOW('t', 21, struct termios) -#define TCSETSF _IOW('t', 22, struct termios) - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCGLTC _IOR('t', 116, struct ltchars) -#define TIOCSLTC _IOW('t', 117, struct ltchars) -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E - -#define TIOCSTI 0x5412 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 - - -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* _ASM_POWERPC_IOCTLS_H */ diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h deleted file mode 100644 index 51ecfef8d843..000000000000 --- a/include/asm-powerpc/iommu.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * Rewrite, cleanup: - * Copyright (C) 2004 Olof Johansson , IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_IOMMU_H -#define _ASM_IOMMU_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include -#include -#include - -#define IOMMU_PAGE_SHIFT 12 -#define IOMMU_PAGE_SIZE (ASM_CONST(1) << IOMMU_PAGE_SHIFT) -#define IOMMU_PAGE_MASK (~((1 << IOMMU_PAGE_SHIFT) - 1)) -#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE) - -/* Boot time flags */ -extern int iommu_is_off; -extern int iommu_force_on; - -/* Pure 2^n version of get_order */ -static __inline__ __attribute_const__ int get_iommu_order(unsigned long size) -{ - return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1; -} - - -/* - * IOMAP_MAX_ORDER defines the largest contiguous block - * of dma space we can get. IOMAP_MAX_ORDER = 13 - * allows up to 2**12 pages (4096 * 4096) = 16 MB - */ -#define IOMAP_MAX_ORDER 13 - -struct iommu_table { - unsigned long it_busno; /* Bus number this table belongs to */ - unsigned long it_size; /* Size of iommu table in entries */ - unsigned long it_offset; /* Offset into global table */ - unsigned long it_base; /* mapped address of tce table */ - unsigned long it_index; /* which iommu table this is */ - unsigned long it_type; /* type: PCI or Virtual Bus */ - unsigned long it_blocksize; /* Entries in each block (cacheline) */ - unsigned long it_hint; /* Hint for next alloc */ - unsigned long it_largehint; /* Hint for large allocs */ - unsigned long it_halfpoint; /* Breaking point for small/large allocs */ - spinlock_t it_lock; /* Protects it_map */ - unsigned long *it_map; /* A simple allocation bitmap for now */ -}; - -struct scatterlist; - -/* Frees table for an individual device node */ -extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); - -/* Initializes an iommu_table based in values set in the passed-in - * structure - */ -extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, - int nid); - -extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, - unsigned long mask, enum dma_data_direction direction, - struct dma_attrs *attrs); -extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction, - struct dma_attrs *attrs); - -extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, - size_t size, dma_addr_t *dma_handle, - unsigned long mask, gfp_t flag, int node); -extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, - void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, - void *vaddr, size_t size, unsigned long mask, - enum dma_data_direction direction, - struct dma_attrs *attrs); -extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction, - struct dma_attrs *attrs); - -extern void iommu_init_early_pSeries(void); -extern void iommu_init_early_iSeries(void); -extern void iommu_init_early_dart(void); -extern void iommu_init_early_pasemi(void); - -#ifdef CONFIG_PCI -extern void pci_iommu_init(void); -extern void pci_direct_iommu_init(void); -#else -static inline void pci_iommu_init(void) { } -#endif - -extern void alloc_dart_table(void); -#if defined(CONFIG_PPC64) && defined(CONFIG_PM) -static inline void iommu_save(void) -{ - if (ppc_md.iommu_save) - ppc_md.iommu_save(); -} - -static inline void iommu_restore(void) -{ - if (ppc_md.iommu_restore) - ppc_md.iommu_restore(); -} -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_IOMMU_H */ diff --git a/include/asm-powerpc/ipcbuf.h b/include/asm-powerpc/ipcbuf.h deleted file mode 100644 index 2c3e1d94db1d..000000000000 --- a/include/asm-powerpc/ipcbuf.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _ASM_POWERPC_IPCBUF_H -#define _ASM_POWERPC_IPCBUF_H - -/* - * The ipc64_perm structure for the powerpc is identical to - * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the - * kernel. Note extra padding because this structure is passed back - * and forth between kernel and user space. Pad space is left for: - * - 1 32-bit value to fill up for 8-byte alignment - * - 2 miscellaneous 64-bit values - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid_t uid; - __kernel_gid_t gid; - __kernel_uid_t cuid; - __kernel_gid_t cgid; - __kernel_mode_t mode; - unsigned int seq; - unsigned int __pad1; - unsigned long long __unused1; - unsigned long long __unused2; -}; - -#endif /* _ASM_POWERPC_IPCBUF_H */ diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h deleted file mode 100644 index 8ff08be00146..000000000000 --- a/include/asm-powerpc/ipic.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * include/asm-powerpc/ipic.h - * - * IPIC external definitions and structure. - * - * Maintainer: Kumar Gala - * - * Copyright 2005 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifdef __KERNEL__ -#ifndef __ASM_IPIC_H__ -#define __ASM_IPIC_H__ - -#include - -/* Flags when we init the IPIC */ -#define IPIC_SPREADMODE_GRP_A 0x00000001 -#define IPIC_SPREADMODE_GRP_B 0x00000002 -#define IPIC_SPREADMODE_GRP_C 0x00000004 -#define IPIC_SPREADMODE_GRP_D 0x00000008 -#define IPIC_SPREADMODE_MIX_A 0x00000010 -#define IPIC_SPREADMODE_MIX_B 0x00000020 -#define IPIC_DISABLE_MCP_OUT 0x00000040 -#define IPIC_IRQ0_MCP 0x00000080 - -/* IPIC registers offsets */ -#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */ -#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */ -#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */ -#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */ -#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */ -#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */ -#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */ -#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */ -#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */ -#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */ -#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */ -#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */ -#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */ -#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */ -#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */ -#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */ -#define IPIC_SERSR 0x40 /* System Error Status Register */ -#define IPIC_SERMR 0x44 /* System Error Mask Register */ -#define IPIC_SERCR 0x48 /* System Error Control Register */ -#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */ -#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */ -#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */ -#define IPIC_SERFR 0x5C /* System Error Force Register */ -#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */ -#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */ - -enum ipic_prio_grp { - IPIC_INT_GRP_A = IPIC_SIPRR_A, - IPIC_INT_GRP_D = IPIC_SIPRR_D, - IPIC_MIX_GRP_A = IPIC_SMPRR_A, - IPIC_MIX_GRP_B = IPIC_SMPRR_B, -}; - -enum ipic_mcp_irq { - IPIC_MCP_IRQ0 = 0, - IPIC_MCP_WDT = 1, - IPIC_MCP_SBA = 2, - IPIC_MCP_PCI1 = 5, - IPIC_MCP_PCI2 = 6, - IPIC_MCP_MU = 7, -}; - -extern int ipic_set_priority(unsigned int irq, unsigned int priority); -extern void ipic_set_highest_priority(unsigned int irq); -extern void ipic_set_default_priority(void); -extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq); -extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); -extern u32 ipic_get_mcp_status(void); -extern void ipic_clear_mcp_status(u32 mask); - -#ifdef CONFIG_PPC_MERGE -extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); -extern unsigned int ipic_get_irq(void); -#else -extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, unsigned int senses_count); -extern int ipic_get_irq(void); -#endif - -#endif /* __ASM_IPIC_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h deleted file mode 100644 index 1ef8e304e0ea..000000000000 --- a/include/asm-powerpc/irq.h +++ /dev/null @@ -1,654 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_POWERPC_IRQ_H -#define _ASM_POWERPC_IRQ_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -#include -#include - - -#define get_irq_desc(irq) (&irq_desc[(irq)]) - -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - -extern atomic_t ppc_n_lost_interrupts; - -#ifdef CONFIG_PPC_MERGE - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (0) - -/* This is a special irq number to return from get_irq() to tell that - * no interrupt happened _and_ ignore it (don't count it as bad). Some - * platforms like iSeries rely on that. - */ -#define NO_IRQ_IGNORE ((unsigned int)-1) - -/* Total number of virq in the platform (make it a CONFIG_* option ? */ -#define NR_IRQS 512 - -/* Number of irqs reserved for the legacy controller */ -#define NUM_ISA_INTERRUPTS 16 - -/* This type is the placeholder for a hardware interrupt number. It has to - * be big enough to enclose whatever representation is used by a given - * platform. - */ -typedef unsigned long irq_hw_number_t; - -/* Interrupt controller "host" data structure. This could be defined as a - * irq domain controller. That is, it handles the mapping between hardware - * and virtual interrupt numbers for a given interrupt domain. The host - * structure is generally created by the PIC code for a given PIC instance - * (though a host can cover more than one PIC if they have a flat number - * model). It's the host callbacks that are responsible for setting the - * irq_chip on a given irq_desc after it's been mapped. - * - * The host code and data structures are fairly agnostic to the fact that - * we use an open firmware device-tree. We do have references to struct - * device_node in two places: in irq_find_host() to find the host matching - * a given interrupt controller node, and of course as an argument to its - * counterpart host->ops->match() callback. However, those are treated as - * generic pointers by the core and the fact that it's actually a device-node - * pointer is purely a convention between callers and implementation. This - * code could thus be used on other architectures by replacing those two - * by some sort of arch-specific void * "token" used to identify interrupt - * controllers. - */ -struct irq_host; -struct radix_tree_root; - -/* Functions below are provided by the host and called whenever a new mapping - * is created or an old mapping is disposed. The host can then proceed to - * whatever internal data structures management is required. It also needs - * to setup the irq_desc when returning from map(). - */ -struct irq_host_ops { - /* Match an interrupt controller device node to a host, returns - * 1 on a match - */ - int (*match)(struct irq_host *h, struct device_node *node); - - /* Create or update a mapping between a virtual irq number and a hw - * irq number. This is called only once for a given mapping. - */ - int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); - - /* Dispose of such a mapping */ - void (*unmap)(struct irq_host *h, unsigned int virq); - - /* Update of such a mapping */ - void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw); - - /* Translate device-tree interrupt specifier from raw format coming - * from the firmware to a irq_hw_number_t (interrupt line number) and - * type (sense) that can be passed to set_irq_type(). In the absence - * of this callback, irq_create_of_mapping() and irq_of_parse_and_map() - * will return the hw number in the first cell and IRQ_TYPE_NONE for - * the type (which amount to keeping whatever default value the - * interrupt controller has for that line) - */ - int (*xlate)(struct irq_host *h, struct device_node *ctrler, - u32 *intspec, unsigned int intsize, - irq_hw_number_t *out_hwirq, unsigned int *out_type); -}; - -struct irq_host { - struct list_head link; - - /* type of reverse mapping technique */ - unsigned int revmap_type; -#define IRQ_HOST_MAP_LEGACY 0 /* legacy 8259, gets irqs 1..15 */ -#define IRQ_HOST_MAP_NOMAP 1 /* no fast reverse mapping */ -#define IRQ_HOST_MAP_LINEAR 2 /* linear map of interrupts */ -#define IRQ_HOST_MAP_TREE 3 /* radix tree */ - union { - struct { - unsigned int size; - unsigned int *revmap; - } linear; - struct radix_tree_root tree; - } revmap_data; - struct irq_host_ops *ops; - void *host_data; - irq_hw_number_t inval_irq; - - /* Optional device node pointer */ - struct device_node *of_node; -}; - -/* The main irq map itself is an array of NR_IRQ entries containing the - * associate host and irq number. An entry with a host of NULL is free. - * An entry can be allocated if it's free, the allocator always then sets - * hwirq first to the host's invalid irq number and then fills ops. - */ -struct irq_map_entry { - irq_hw_number_t hwirq; - struct irq_host *host; -}; - -extern struct irq_map_entry irq_map[NR_IRQS]; - -extern irq_hw_number_t virq_to_hw(unsigned int virq); - -/** - * irq_alloc_host - Allocate a new irq_host data structure - * @of_node: optional device-tree node of the interrupt controller - * @revmap_type: type of reverse mapping to use - * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map - * @ops: map/unmap host callbacks - * @inval_irq: provide a hw number in that host space that is always invalid - * - * Allocates and initialize and irq_host structure. Note that in the case of - * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns - * for all legacy interrupts except 0 (which is always the invalid irq for - * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by - * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated - * later during boot automatically (the reverse mapping will use the slow path - * until that happens). - */ -extern struct irq_host *irq_alloc_host(struct device_node *of_node, - unsigned int revmap_type, - unsigned int revmap_arg, - struct irq_host_ops *ops, - irq_hw_number_t inval_irq); - - -/** - * irq_find_host - Locates a host for a given device node - * @node: device-tree node of the interrupt controller - */ -extern struct irq_host *irq_find_host(struct device_node *node); - - -/** - * irq_set_default_host - Set a "default" host - * @host: default host pointer - * - * For convenience, it's possible to set a "default" host that will be used - * whenever NULL is passed to irq_create_mapping(). It makes life easier for - * platforms that want to manipulate a few hard coded interrupt numbers that - * aren't properly represented in the device-tree. - */ -extern void irq_set_default_host(struct irq_host *host); - - -/** - * irq_set_virq_count - Set the maximum number of virt irqs - * @count: number of linux virtual irqs, capped with NR_IRQS - * - * This is mainly for use by platforms like iSeries who want to program - * the virtual irq number in the controller to avoid the reverse mapping - */ -extern void irq_set_virq_count(unsigned int count); - - -/** - * irq_create_mapping - Map a hardware interrupt into linux virq space - * @host: host owning this hardware interrupt or NULL for default host - * @hwirq: hardware irq number in that host space - * - * Only one mapping per hardware interrupt is permitted. Returns a linux - * virq number. - * If the sense/trigger is to be specified, set_irq_type() should be called - * on the number returned from that call. - */ -extern unsigned int irq_create_mapping(struct irq_host *host, - irq_hw_number_t hwirq); - - -/** - * irq_dispose_mapping - Unmap an interrupt - * @virq: linux virq number of the interrupt to unmap - */ -extern void irq_dispose_mapping(unsigned int virq); - -/** - * irq_find_mapping - Find a linux virq from an hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a slow path, for use by generic code. It's expected that an - * irq controller implementation directly calls the appropriate low level - * mapping function. - */ -extern unsigned int irq_find_mapping(struct irq_host *host, - irq_hw_number_t hwirq); - -/** - * irq_create_direct_mapping - Allocate a virq for direct mapping - * @host: host to allocate the virq for or NULL for default host - * - * This routine is used for irq controllers which can choose the hardware - * interrupt numbers they generate. In such a case it's simplest to use - * the linux virq as the hardware interrupt number. - */ -extern unsigned int irq_create_direct_mapping(struct irq_host *host); - -/** - * irq_radix_revmap - Find a linux virq from a hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a fast path, for use by irq controller code that uses radix tree - * revmaps - */ -extern unsigned int irq_radix_revmap(struct irq_host *host, - irq_hw_number_t hwirq); - -/** - * irq_linear_revmap - Find a linux virq from a hw irq number. - * @host: host owning this hardware interrupt - * @hwirq: hardware irq number in that host space - * - * This is a fast path, for use by irq controller code that uses linear - * revmaps. It does fallback to the slow path if the revmap doesn't exist - * yet and will create the revmap entry with appropriate locking - */ - -extern unsigned int irq_linear_revmap(struct irq_host *host, - irq_hw_number_t hwirq); - - - -/** - * irq_alloc_virt - Allocate virtual irq numbers - * @host: host owning these new virtual irqs - * @count: number of consecutive numbers to allocate - * @hint: pass a hint number, the allocator will try to use a 1:1 mapping - * - * This is a low level function that is used internally by irq_create_mapping() - * and that can be used by some irq controllers implementations for things - * like allocating ranges of numbers for MSIs. The revmaps are left untouched. - */ -extern unsigned int irq_alloc_virt(struct irq_host *host, - unsigned int count, - unsigned int hint); - -/** - * irq_free_virt - Free virtual irq numbers - * @virq: virtual irq number of the first interrupt to free - * @count: number of interrupts to free - * - * This function is the opposite of irq_alloc_virt. It will not clear reverse - * maps, this should be done previously by unmap'ing the interrupt. In fact, - * all interrupts covered by the range being freed should have been unmapped - * prior to calling this. - */ -extern void irq_free_virt(unsigned int virq, unsigned int count); - - -/* -- OF helpers -- */ - -/* irq_create_of_mapping - Map a hardware interrupt into linux virq space - * @controller: Device node of the interrupt controller - * @inspec: Interrupt specifier from the device-tree - * @intsize: Size of the interrupt specifier from the device-tree - * - * This function is identical to irq_create_mapping except that it takes - * as input informations straight from the device-tree (typically the results - * of the of_irq_map_*() functions. - */ -extern unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize); - - -/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space - * @device: Device node of the device whose interrupt is to be mapped - * @index: Index of the interrupt to map - * - * This function is a wrapper that chains of_irq_map_one() and - * irq_create_of_mapping() to make things easier to callers - */ -extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index); - -/* -- End OF helpers -- */ - -/** - * irq_early_init - Init irq remapping subsystem - */ -extern void irq_early_init(void); - -static __inline__ int irq_canonicalize(int irq) -{ - return irq; -} - - -#else /* CONFIG_PPC_MERGE */ - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) -#define NO_IRQ_IGNORE (-2) - - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 -#define __DO_IRQ_CANON 1 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -#endif /* Whatever way too big #ifdef */ - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -#ifdef __DO_IRQ_CANON -extern int ppc_do_canonicalize_irqs; -#else -#define ppc_do_canonicalize_irqs 0 -#endif - -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_do_canonicalize_irqs && irq == 2) - irq = 9; - return irq; -} -#endif /* CONFIG_PPC_MERGE */ - -extern int distribute_irqs; - -struct irqaction; -struct pt_regs; - -#define __ARCH_HAS_DO_SOFTIRQ - -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -/* - * Per-cpu stacks for handling critical, debug and machine check - * level interrupts. - */ -extern struct thread_info *critirq_ctx[NR_CPUS]; -extern struct thread_info *dbgirq_ctx[NR_CPUS]; -extern struct thread_info *mcheckirq_ctx[NR_CPUS]; -extern void exc_lvl_ctx_init(void); -#else -#define exc_lvl_ctx_init() -#endif - -#ifdef CONFIG_IRQSTACKS -/* - * Per-cpu stacks for handling hard and soft interrupts. - */ -extern struct thread_info *hardirq_ctx[NR_CPUS]; -extern struct thread_info *softirq_ctx[NR_CPUS]; - -extern void irq_ctx_init(void); -extern void call_do_softirq(struct thread_info *tp); -extern int call_handle_irq(int irq, void *p1, - struct thread_info *tp, void *func); -#else -#define irq_ctx_init() - -#endif /* CONFIG_IRQSTACKS */ - -extern void do_IRQ(struct pt_regs *regs); - -#endif /* _ASM_IRQ_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/irq_regs.h b/include/asm-powerpc/irq_regs.h deleted file mode 100644 index ba94b51a0a70..000000000000 --- a/include/asm-powerpc/irq_regs.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-powerpc/irqflags.h b/include/asm-powerpc/irqflags.h deleted file mode 100644 index cc6fdba33660..000000000000 --- a/include/asm-powerpc/irqflags.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-powerpc/irqflags.h - * - * IRQ flags handling - */ -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -#ifndef __ASSEMBLY__ -/* - * Get definitions for raw_local_save_flags(x), etc. - */ -#include - -#else -#ifdef CONFIG_TRACE_IRQFLAGS -/* - * Most of the CPU's IRQ-state tracing is done from assembly code; we - * have to call a C function so call a wrapper that saves all the - * C-clobbered registers. - */ -#define TRACE_ENABLE_INTS bl .trace_hardirqs_on -#define TRACE_DISABLE_INTS bl .trace_hardirqs_off -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ - cmpdi en, 0; \ - bne 95f; \ - stb en,PACASOFTIRQEN(r13); \ - bl .trace_hardirqs_off; \ - b skip; \ -95: bl .trace_hardirqs_on; \ - li en,1; -#define TRACE_AND_RESTORE_IRQ(en) \ - TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ -96: stb en,PACASOFTIRQEN(r13) -#else -#define TRACE_ENABLE_INTS -#define TRACE_DISABLE_INTS -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) -#define TRACE_AND_RESTORE_IRQ(en) \ - stb en,PACASOFTIRQEN(r13) -#endif -#endif - -#endif diff --git a/include/asm-powerpc/iseries/alpaca.h b/include/asm-powerpc/iseries/alpaca.h deleted file mode 100644 index c0cce6727a69..000000000000 --- a/include/asm-powerpc/iseries/alpaca.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright © 2008 Stephen Rothwell IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_ALPACA_H -#define _ASM_POWERPC_ISERIES_ALPACA_H - -/* - * This is the part of the paca that the iSeries hypervisor - * needs to be statically initialised. Immediately after boot - * we switch to the normal Linux paca. - */ -struct alpaca { - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ -}; - -#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/include/asm-powerpc/iseries/hv_call.h b/include/asm-powerpc/iseries/hv_call.h deleted file mode 100644 index 162d653ad51f..000000000000 --- a/include/asm-powerpc/iseries/hv_call.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H -#define _ASM_POWERPC_ISERIES_HV_CALL_H - -#include -#include -#include - -/* Type of yield for HvCallBaseYieldProcessor */ -#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */ -#define HvCall_YieldToActive 1 /* Yield until all active procs have run */ -#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */ - -/* interrupt masks for setEnabledInterrupts */ -#define HvCall_MaskIPI 0x00000001 -#define HvCall_MaskLpEvent 0x00000002 -#define HvCall_MaskLpProd 0x00000004 -#define HvCall_MaskTimeout 0x00000008 - -/* Log buffer formats */ -#define HvCall_LogBuffer_ASCII 0 -#define HvCall_LogBuffer_EBCDIC 1 - -#define HvCallBaseAckDeferredInts HvCallBase + 0 -#define HvCallBaseCpmPowerOff HvCallBase + 1 -#define HvCallBaseGetHwPatch HvCallBase + 2 -#define HvCallBaseReIplSpAttn HvCallBase + 3 -#define HvCallBaseSetASR HvCallBase + 4 -#define HvCallBaseSetASRAndRfi HvCallBase + 5 -#define HvCallBaseSetIMR HvCallBase + 6 -#define HvCallBaseSendIPI HvCallBase + 7 -#define HvCallBaseTerminateMachine HvCallBase + 8 -#define HvCallBaseTerminateMachineSrc HvCallBase + 9 -#define HvCallBaseProcessPlicInterrupts HvCallBase + 10 -#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11 -#define HvCallBaseSetVirtualSIT HvCallBase + 12 -#define HvCallBaseVaryOffThisProcessor HvCallBase + 13 -#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14 -#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15 -#define HvCallBaseSendLpProd HvCallBase + 16 -#define HvCallBaseSetEnabledInterrupts HvCallBase + 17 -#define HvCallBaseYieldProcessor HvCallBase + 18 -#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19 -#define HvCallBaseSetVirtualDecr HvCallBase + 20 -#define HvCallBaseClearLogBuffer HvCallBase + 21 -#define HvCallBaseGetLogBufferCodePage HvCallBase + 22 -#define HvCallBaseGetLogBufferFormat HvCallBase + 23 -#define HvCallBaseGetLogBufferLength HvCallBase + 24 -#define HvCallBaseReadLogBuffer HvCallBase + 25 -#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26 -#define HvCallBaseWriteLogBuffer HvCallBase + 27 -#define HvCallBaseRouter28 HvCallBase + 28 -#define HvCallBaseRouter29 HvCallBase + 29 -#define HvCallBaseRouter30 HvCallBase + 30 -#define HvCallBaseSetDebugBus HvCallBase + 31 - -#define HvCallCcSetDABR HvCallCc + 7 - -static inline void HvCall_setVirtualDecr(void) -{ - /* - * Ignore any error return codes - most likely means that the - * target value for the LP has been increased and this vary off - * would bring us below the new target. - */ - HvCall0(HvCallBaseSetVirtualDecr); -} - -static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm) -{ - HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm); -} - -static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts) -{ - HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts); -} - -static inline void HvCall_setLogBufferFormatAndCodepage(int format, - u32 codePage) -{ - HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage); -} - -extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen); - -static inline void HvCall_sendIPI(struct paca_struct *targetPaca) -{ - HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/include/asm-powerpc/iseries/hv_call_event.h deleted file mode 100644 index cc029d388e11..000000000000 --- a/include/asm-powerpc/iseries/hv_call_event.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H - -#include -#include - -#include -#include -#include - -struct HvLpEvent; - -typedef u8 HvLpEvent_Type; -typedef u8 HvLpEvent_AckInd; -typedef u8 HvLpEvent_AckType; - -typedef u8 HvLpDma_Direction; -typedef u8 HvLpDma_AddressType; - -typedef u64 HvLpEvent_Rc; -typedef u64 HvLpDma_Rc; - -#define HvCallEventAckLpEvent HvCallEvent + 0 -#define HvCallEventCancelLpEvent HvCallEvent + 1 -#define HvCallEventCloseLpEventPath HvCallEvent + 2 -#define HvCallEventDmaBufList HvCallEvent + 3 -#define HvCallEventDmaSingle HvCallEvent + 4 -#define HvCallEventDmaToSp HvCallEvent + 5 -#define HvCallEventGetOverflowLpEvents HvCallEvent + 6 -#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7 -#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8 -#define HvCallEventOpenLpEventPath HvCallEvent + 9 -#define HvCallEventSetLpEventStack HvCallEvent + 10 -#define HvCallEventSignalLpEvent HvCallEvent + 11 -#define HvCallEventSignalLpEventParms HvCallEvent + 12 -#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13 -#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14 -#define HvCallEventRouter15 HvCallEvent + 15 - -static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex) -{ - HvCall1(HvCallEventGetOverflowLpEvents, queueIndex); -} - -static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex) -{ - HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex); -} - -static inline void HvCallEvent_setLpEventStack(u8 queueIndex, - char *eventStackAddr, u32 eventStackSize) -{ - HvCall3(HvCallEventSetLpEventStack, queueIndex, - virt_to_abs(eventStackAddr), eventStackSize); -} - -static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex, - u16 lpLogicalProcIndex) -{ - HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex, - lpLogicalProcIndex); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, - HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd, - HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId, - HvLpInstanceId targetInstanceId, u64 correlationToken, - u64 eventData1, u64 eventData2, u64 eventData3, - u64 eventData4, u64 eventData5) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 ack_and_target; - u8 type; - u16 subtype; - HvLpInstanceId src_inst; - HvLpInstanceId target_inst; - } parms; - u64 dword; - } packed; - - packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp; - packed.parms.type = type; - packed.parms.subtype = subtype; - packed.parms.src_inst = sourceInstanceId; - packed.parms.target_inst = targetInstanceId; - - return HvCall7(HvCallEventSignalLpEventParms, packed.dword, - correlationToken, eventData1, eventData2, - eventData3, eventData4, eventData5); -} - -extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); -extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, - enum dma_data_direction direction); -extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction); - -static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event)); -} - -static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type); -} - -static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type); -} - -static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventOpenLpEventPath, targetLp, type); -} - -static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventCloseLpEventPath, targetLp, type); -} - -static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type, - HvLpIndex remoteLp, HvLpDma_Direction direction, - HvLpInstanceId localInstanceId, - HvLpInstanceId remoteInstanceId, - HvLpDma_AddressType localAddressType, - HvLpDma_AddressType remoteAddressType, - /* Do these need to be converted to absolute addresses? */ - u64 localBufList, u64 remoteBufList, u32 transferLength) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 flags; - HvLpIndex remote; - u8 type; - u8 reserved; - HvLpInstanceId local_inst; - HvLpInstanceId remote_inst; - } parms; - u64 dword; - } packed; - - packed.parms.flags = (direction << 7) | - (localAddressType << 6) | (remoteAddressType << 5); - packed.parms.remote = remoteLp; - packed.parms.type = type; - packed.parms.reserved = 0; - packed.parms.local_inst = localInstanceId; - packed.parms.remote_inst = remoteInstanceId; - - return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList, - remoteBufList, transferLength); -} - -static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, - u32 length, HvLpDma_Direction dir) -{ - return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote, - length, dir); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/include/asm-powerpc/iseries/hv_call_sc.h deleted file mode 100644 index f5d210959250..000000000000 --- a/include/asm-powerpc/iseries/hv_call_sc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H -#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H - -#include - -#define HvCallBase 0x8000000000000000ul -#define HvCallCc 0x8001000000000000ul -#define HvCallCfg 0x8002000000000000ul -#define HvCallEvent 0x8003000000000000ul -#define HvCallHpt 0x8004000000000000ul -#define HvCallPci 0x8005000000000000ul -#define HvCallSm 0x8007000000000000ul -#define HvCallXm 0x8009000000000000ul - -extern u64 HvCall0(u64); -extern u64 HvCall1(u64, u64); -extern u64 HvCall2(u64, u64, u64); -extern u64 HvCall3(u64, u64, u64, u64); -extern u64 HvCall4(u64, u64, u64, u64, u64); -extern u64 HvCall5(u64, u64, u64, u64, u64, u64); -extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64); - -extern u64 HvCall0Ret16(u64, void *); -extern u64 HvCall1Ret16(u64, void *, u64); -extern u64 HvCall2Ret16(u64, void *, u64, u64); -extern u64 HvCall3Ret16(u64, void *, u64, u64, u64); -extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64); -extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); -extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/include/asm-powerpc/iseries/hv_call_xm.h deleted file mode 100644 index 392ac3f54df0..000000000000 --- a/include/asm-powerpc/iseries/hv_call_xm.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from SLIC. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H -#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H - -#include -#include - -#define HvCallXmGetTceTableParms HvCallXm + 0 -#define HvCallXmTestBus HvCallXm + 1 -#define HvCallXmConnectBusUnit HvCallXm + 2 -#define HvCallXmLoadTod HvCallXm + 8 -#define HvCallXmTestBusUnit HvCallXm + 9 -#define HvCallXmSetTce HvCallXm + 11 -#define HvCallXmSetTces HvCallXm + 13 - -static inline void HvCallXm_getTceTableParms(u64 cb) -{ - HvCall1(HvCallXmGetTceTableParms, cb); -} - -static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce) -{ - return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce); -} - -static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, - u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4) -{ - return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces, - tce1, tce2, tce3, tce4); -} - -static inline u64 HvCallXm_testBus(u16 busNumber) -{ - return HvCall1(HvCallXmTestBus, busNumber); -} - -static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId) -{ - return HvCall2(HvCallXmTestBusUnit, busNumber, - (subBusNumber << 8) | deviceId); -} - -static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId, u64 interruptToken) -{ - return HvCall5(HvCallXmConnectBusUnit, busNumber, - (subBusNumber << 8) | deviceId, interruptToken, 0, - 0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */); -} - -static inline u64 HvCallXm_loadTod(void) -{ - return HvCall0(HvCallXmLoadTod); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/include/asm-powerpc/iseries/hv_lp_config.h deleted file mode 100644 index a006fd1e4a2c..000000000000 --- a/include/asm-powerpc/iseries/hv_lp_config.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H -#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H - -/* - * This file contains the interface to the LPAR configuration data - * to determine which resources should be allocated to each partition. - */ - -#include -#include - -enum { - HvCallCfg_Cur = 0, - HvCallCfg_Init = 1, - HvCallCfg_Max = 2, - HvCallCfg_Min = 3 -}; - -#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6 -#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7 -#define HvCallCfgGetMsChunks HvCallCfg + 9 -#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20 -#define HvCallCfgGetSharedProcUnits HvCallCfg + 21 -#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22 -#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30 -#define HvCallCfgGetHostingLpIndex HvCallCfg + 32 - -extern HvLpIndex HvLpConfig_getLpIndex_outline(void); -extern HvLpIndex HvLpConfig_getLpIndex(void); -extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void); - -static inline u64 HvLpConfig_getMsChunks(void) -{ - return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getSystemPhysicalProcessors(void) -{ - return HvCall0(HvCallCfgGetSystemPhysicalProcessors); -} - -static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI) -{ - return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI); -} - -static inline u64 HvLpConfig_getPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void) -{ - return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex()); -} - -static inline u64 HvLpConfig_getSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getMaxSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline u64 HvLpConfig_getMaxPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp( - HvLpIndex lp) -{ - /* - * This is a new function in V5R1 so calls to this on older - * hypervisors will return -1 - */ - u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp); - if (retVal == -1) - retVal = 0; - return retVal; -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void) -{ - return HvLpConfig_getVirtualLanIndexMapForLp( - HvLpConfig_getLpIndex_outline()); -} - -static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, - HvLpIndex lp2) -{ - HvLpVirtualLanIndexMap virtualLanIndexMap1 = - HvLpConfig_getVirtualLanIndexMapForLp(lp1); - HvLpVirtualLanIndexMap virtualLanIndexMap2 = - HvLpConfig_getVirtualLanIndexMapForLp(lp2); - return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0); -} - -static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) -{ - return HvCall1(HvCallCfgGetHostingLpIndex, lp); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h deleted file mode 100644 index 8f5da7d77202..000000000000 --- a/include/asm-powerpc/iseries/hv_lp_event.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* This file contains the class for HV events in the system. */ - -#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H - -#include -#include -#include -#include - -/* - * HvLpEvent is the structure for Lp Event messages passed between - * partitions through PLIC. - */ - -struct HvLpEvent { - u8 flags; /* Event flags x00-x00 */ - u8 xType; /* Type of message x01-x01 */ - u16 xSubtype; /* Subtype for event x02-x03 */ - u8 xSourceLp; /* Source LP x04-x04 */ - u8 xTargetLp; /* Target LP x05-x05 */ - u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */ - u8 xRc; /* RC for Ack flows x07-x07 */ - u16 xSourceInstanceId; /* Source sides instance id x08-x09 */ - u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */ - union { - u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */ - u16 xSubtypeDataShort[2]; /* Data as 2 shorts */ - u8 xSubtypeDataChar[4]; /* Data as 4 chars */ - } x; - - u64 xCorrelationToken; /* Unique value for source/type x10-x17 */ -}; - -typedef void (*LpEventHandler)(struct HvLpEvent *); - -/* Register a handler for an event type - returns 0 on success */ -extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType, - LpEventHandler hdlr); - -/* - * Unregister a handler for an event type - * - * This call will sleep until the handler being removed is guaranteed to - * be no longer executing on any CPU. Do not call with locks held. - * - * returns 0 on success - * Unregister will fail if there are any paths open for the type - */ -extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType); - -/* - * Open an Lp Event Path for an event type - * returns 0 on success - * openPath will fail if there is no handler registered for the event type. - * The lpIndex specified is the partition index for the target partition - * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) - */ -extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -/* - * Close an Lp Event Path for a type and partition - * returns 0 on success - */ -extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -#define HvLpEvent_Type_Hypervisor 0 -#define HvLpEvent_Type_MachineFac 1 -#define HvLpEvent_Type_SessionMgr 2 -#define HvLpEvent_Type_SpdIo 3 -#define HvLpEvent_Type_VirtualBus 4 -#define HvLpEvent_Type_PciIo 5 -#define HvLpEvent_Type_RioIo 6 -#define HvLpEvent_Type_VirtualLan 7 -#define HvLpEvent_Type_VirtualIo 8 -#define HvLpEvent_Type_NumTypes 9 - -#define HvLpEvent_Rc_Good 0 -#define HvLpEvent_Rc_BufferNotAvailable 1 -#define HvLpEvent_Rc_Cancelled 2 -#define HvLpEvent_Rc_GenericError 3 -#define HvLpEvent_Rc_InvalidAddress 4 -#define HvLpEvent_Rc_InvalidPartition 5 -#define HvLpEvent_Rc_InvalidSize 6 -#define HvLpEvent_Rc_InvalidSubtype 7 -#define HvLpEvent_Rc_InvalidSubtypeData 8 -#define HvLpEvent_Rc_InvalidType 9 -#define HvLpEvent_Rc_PartitionDead 10 -#define HvLpEvent_Rc_PathClosed 11 -#define HvLpEvent_Rc_SubtypeError 12 - -#define HvLpEvent_Function_Ack 0 -#define HvLpEvent_Function_Int 1 - -#define HvLpEvent_AckInd_NoAck 0 -#define HvLpEvent_AckInd_DoAck 1 - -#define HvLpEvent_AckType_ImmediateAck 0 -#define HvLpEvent_AckType_DeferredAck 1 - -#define HV_LP_EVENT_INT 0x01 -#define HV_LP_EVENT_DO_ACK 0x02 -#define HV_LP_EVENT_DEFERRED_ACK 0x04 -#define HV_LP_EVENT_VALID 0x80 - -#define HvLpDma_Direction_LocalToRemote 0 -#define HvLpDma_Direction_RemoteToLocal 1 - -#define HvLpDma_AddressType_TceIndex 0 -#define HvLpDma_AddressType_RealAddress 1 - -#define HvLpDma_Rc_Good 0 -#define HvLpDma_Rc_Error 1 -#define HvLpDma_Rc_PartitionDead 2 -#define HvLpDma_Rc_PathClosed 3 -#define HvLpDma_Rc_InvalidAddress 4 -#define HvLpDma_Rc_InvalidLength 5 - -static inline int hvlpevent_is_valid(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_VALID; -} - -static inline void hvlpevent_invalidate(struct HvLpEvent *h) -{ - h->flags &= ~ HV_LP_EVENT_VALID; -} - -static inline int hvlpevent_is_int(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_INT; -} - -static inline int hvlpevent_is_ack(struct HvLpEvent *h) -{ - return !hvlpevent_is_int(h); -} - -static inline int hvlpevent_need_ack(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_DO_ACK; -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/include/asm-powerpc/iseries/hv_types.h b/include/asm-powerpc/iseries/hv_types.h deleted file mode 100644 index c3e6d2a1d1c3..000000000000 --- a/include/asm-powerpc/iseries/hv_types.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H -#define _ASM_POWERPC_ISERIES_HV_TYPES_H - -/* - * General typedefs for the hypervisor. - */ - -#include - -typedef u8 HvLpIndex; -typedef u16 HvLpInstanceId; -typedef u64 HvLpTOD; -typedef u64 HvLpSystemSerialNum; -typedef u8 HvLpDeviceSerialNum[12]; -typedef u16 HvLpSanHwSet; -typedef u16 HvLpBus; -typedef u16 HvLpBoard; -typedef u16 HvLpCard; -typedef u8 HvLpDeviceType[4]; -typedef u8 HvLpDeviceModel[3]; -typedef u64 HvIoToken; -typedef u8 HvLpName[8]; -typedef u32 HvIoId; -typedef u64 HvRealMemoryIndex; -typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */ -typedef u16 HvLpVrmIndex; -typedef u32 HvXmGenerationId; -typedef u8 HvLpBusPool; -typedef u8 HvLpSharedPoolIndex; -typedef u16 HvLpSharedProcUnitsX100; -typedef u8 HvLpVirtualLanIndex; -typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */ -typedef u16 HvBusNumber; /* Hypervisor Bus Number */ -typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */ -typedef u8 HvAgentId; /* Hypervisor DevFn */ - - -#define HVMAXARCHITECTEDLPS 32 -#define HVMAXARCHITECTEDVIRTUALLANS 16 -#define HVMAXARCHITECTEDVIRTUALDISKS 32 -#define HVMAXARCHITECTEDVIRTUALCDROMS 8 -#define HVMAXARCHITECTEDVIRTUALTAPES 8 -#define HVCHUNKSIZE (256 * 1024) -#define HVPAGESIZE (4 * 1024) -#define HVLPMINMEGSPRIMARY 256 -#define HVLPMINMEGSSECONDARY 64 -#define HVCHUNKSPERMEG 4 -#define HVPAGESPERMEG 256 -#define HVPAGESPERCHUNK 64 - -#define HvLpIndexInvalid ((HvLpIndex)0xff) - -/* - * Enums for the sub-components under PLIC - * Used in HvCall and HvPrimaryCall - */ -enum { - HvCallCompId = 0, - HvCallCpuCtlsCompId = 1, - HvCallCfgCompId = 2, - HvCallEventCompId = 3, - HvCallHptCompId = 4, - HvCallPciCompId = 5, - HvCallSlmCompId = 6, - HvCallSmCompId = 7, - HvCallSpdCompId = 8, - HvCallXmCompId = 9, - HvCallRioCompId = 10, - HvCallRsvd3CompId = 11, - HvCallRsvd2CompId = 12, - HvCallRsvd1CompId = 13, - HvCallMaxCompId = 14, - HvPrimaryCallCompId = 0, - HvPrimaryCallCfgCompId = 1, - HvPrimaryCallPciCompId = 2, - HvPrimaryCallSmCompId = 3, - HvPrimaryCallSpdCompId = 4, - HvPrimaryCallXmCompId = 5, - HvPrimaryCallRioCompId = 6, - HvPrimaryCallRsvd7CompId = 7, - HvPrimaryCallRsvd6CompId = 8, - HvPrimaryCallRsvd5CompId = 9, - HvPrimaryCallRsvd4CompId = 10, - HvPrimaryCallRsvd3CompId = 11, - HvPrimaryCallRsvd2CompId = 12, - HvPrimaryCallRsvd1CompId = 13, - HvPrimaryCallMaxCompId = HvCallMaxCompId -}; - -struct HvLpBufferList { - u64 addr; - u64 len; -}; - -#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/include/asm-powerpc/iseries/iommu.h b/include/asm-powerpc/iseries/iommu.h deleted file mode 100644 index c59ee7e4bed1..000000000000 --- a/include/asm-powerpc/iseries/iommu.h +++ /dev/null @@ -1,41 +0,0 @@ -#ifndef _ASM_POWERPC_ISERIES_IOMMU_H -#define _ASM_POWERPC_ISERIES_IOMMU_H - -/* - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - */ - -struct pci_dev; -struct vio_dev; -struct device_node; -struct iommu_table; - -/* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, - struct device_node *dn); - -/* Get table parameters from HV */ -extern void iommu_table_getparms_iSeries(unsigned long busno, - unsigned char slotno, unsigned char virtbus, - struct iommu_table *tbl); - -extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); -extern void iommu_vio_init(void); - -#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/include/asm-powerpc/iseries/it_lp_queue.h deleted file mode 100644 index 428278838821..000000000000 --- a/include/asm-powerpc/iseries/it_lp_queue.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H -#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H - -/* - * This control block defines the simple LP queue structure that is - * shared between the hypervisor (PLIC) and the OS in order to send - * events to an LP. - */ - -#include -#include - -#define IT_LP_MAX_QUEUES 8 - -#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ -#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ -#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ -#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ - -#define IT_LP_EVENT_STACK_SIZE 4096 -#define IT_LP_EVENT_MAX_SIZE 256 -#define IT_LP_EVENT_ALIGN 64 - -struct hvlpevent_queue { -/* - * The hq_current_event is the pointer to the next event stack entry - * that will become valid. The OS must peek at this entry to determine - * if it is valid. PLIC will set the valid indicator as the very last - * store into that entry. - * - * When the OS has completed processing of the event then it will mark - * the event as invalid so that PLIC knows it can store into that event - * location again. - * - * If the event stack fills and there are overflow events, then PLIC - * will set the hq_overflow_pending flag in which case the OS will - * have to fetch the additional LP events once they have drained the - * event stack. - * - * The first 16-bytes are known by both the OS and PLIC. The remainder - * of the cache line is for use by the OS. - */ - u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ - u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ - u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ - u8 hq_reserved1[12]; /* 0x04 */ - char *hq_current_event; /* 0x10 */ - char *hq_last_event; /* 0x18 */ - char *hq_event_stack; /* 0x20 */ - u8 hq_index; /* 0x28 unique sequential index. */ - u8 hq_reserved2[3]; /* 0x29-2b */ - spinlock_t hq_lock; -}; - -extern struct hvlpevent_queue hvlpevent_queue; - -extern int hvlpevent_is_pending(void); -extern void process_hvlpevents(void); -extern void setup_hvlpevent_queue(void); - -#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/include/asm-powerpc/iseries/lpar_map.h b/include/asm-powerpc/iseries/lpar_map.h deleted file mode 100644 index 5e9f3e128ee2..000000000000 --- a/include/asm-powerpc/iseries/lpar_map.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H -#define _ASM_POWERPC_ISERIES_LPAR_MAP_H - -#ifndef __ASSEMBLY__ - -#include - -#endif - -/* - * The iSeries hypervisor will set up mapping for one or more - * ESID/VSID pairs (in SLB/segment registers) and will set up - * mappings of one or more ranges of pages to VAs. - * We will have the hypervisor set up the ESID->VSID mapping - * for the four kernel segments (C-F). With shared processors, - * the hypervisor will clear all segment registers and reload - * these four whenever the processor is switched from one - * partition to another. - */ - -/* The Vsid and Esid identified below will be used by the hypervisor - * to set up a memory mapping for part of the load area before giving - * control to the Linux kernel. The load area is 64 MB, but this must - * not attempt to map the whole load area. The Hashed Page Table may - * need to be located within the load area (if the total partition size - * is 64 MB), but cannot be mapped. Typically, this should specify - * to map half (32 MB) of the load area. - * - * The hypervisor will set up page table entries for the number of - * pages specified. - * - * In 32-bit mode, the hypervisor will load all four of the - * segment registers (identified by the low-order four bits of the - * Esid field. In 64-bit mode, the hypervisor will load one SLB - * entry to map the Esid to the Vsid. -*/ - -#define HvEsidsToMap 2 -#define HvRangesToMap 1 - -/* Hypervisor initially maps 32MB of the load area */ -#define HvPagesToMap 8192 - -#ifndef __ASSEMBLY__ -struct LparMap { - u64 xNumberEsids; // Number of ESID/VSID pairs - u64 xNumberRanges; // Number of VA ranges to map - u64 xSegmentTableOffs; // Page number within load area of seg table - u64 xRsvd[5]; - struct { - u64 xKernelEsid; // Esid used to map kernel load - u64 xKernelVsid; // Vsid used to map kernel load - } xEsids[HvEsidsToMap]; - struct { - u64 xPages; // Number of pages to be mapped - u64 xOffset; // Offset from start of load area - u64 xVPN; // Virtual Page Number - } xRanges[HvRangesToMap]; -}; - -extern const struct LparMap xLparMap; - -#endif /* __ASSEMBLY__ */ - -/* the fixed address where the LparMap exists */ -#define LPARMAP_PHYS 0x7000 - -#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/include/asm-powerpc/iseries/mf.h b/include/asm-powerpc/iseries/mf.h deleted file mode 100644 index eb851a9c9e5c..000000000000 --- a/include/asm-powerpc/iseries/mf.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation - * - * This modules exists as an interface between a Linux secondary partition - * running on an iSeries and the primary partition's Virtual Service - * Processor (VSP) object. The VSP has final authority over powering on/off - * all partitions in the iSeries. It also provides miscellaneous low-level - * machine facility type operations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_MF_H -#define _ASM_POWERPC_ISERIES_MF_H - -#include - -#include -#include - -struct rtc_time; - -typedef void (*MFCompleteHandler)(void *clientToken, int returnCode); - -extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned size, unsigned amount, MFCompleteHandler hdlr, - void *userToken); -extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned count, MFCompleteHandler hdlr, void *userToken); - -extern void mf_power_off(void); -extern void mf_reboot(char *cmd); - -extern void mf_display_src(u32 word); -extern void mf_display_progress(u16 value); - -extern void mf_init(void); - -#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/include/asm-powerpc/iseries/vio.h b/include/asm-powerpc/iseries/vio.h deleted file mode 100644 index f9ac0d00b951..000000000000 --- a/include/asm-powerpc/iseries/vio.h +++ /dev/null @@ -1,265 +0,0 @@ -/* -*- linux-c -*- - * - * iSeries Virtual I/O Message Path header - * - * Authors: Dave Boutcher - * Ryan Arnold - * Colin Devilbiss - * - * (C) Copyright 2000 IBM Corporation - * - * This header file is used by the iSeries virtual I/O device - * drivers. It defines the interfaces to the common functions - * (implemented in drivers/char/viopath.h) as well as defining - * common functions and structures. Currently (at the time I - * wrote this comment) the iSeries virtual I/O device drivers - * that use this are - * drivers/block/viodasd.c - * drivers/char/viocons.c - * drivers/char/viotape.c - * drivers/cdrom/viocd.c - * - * The iSeries virtual ethernet support (veth.c) uses a whole - * different set of functions. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) anyu later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef _ASM_POWERPC_ISERIES_VIO_H -#define _ASM_POWERPC_ISERIES_VIO_H - -#include -#include - -/* - * iSeries virtual I/O events use the subtype field in - * HvLpEvent to figure out what kind of vio event is coming - * in. We use a table to route these, and this defines - * the maximum number of distinct subtypes - */ -#define VIO_MAX_SUBTYPES 8 - -#define VIOMAXBLOCKDMA 12 - -struct open_data { - u64 disk_size; - u16 max_disk; - u16 cylinders; - u16 tracks; - u16 sectors; - u16 bytes_per_sector; -}; - -struct rw_data { - u64 offset; - struct { - u32 token; - u32 reserved; - u64 len; - } dma_info[VIOMAXBLOCKDMA]; -}; - -struct vioblocklpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - union { - struct open_data open_data; - struct rw_data rw_data; - u64 changed; - } u; -}; - -#define vioblockflags_ro 0x0001 - -enum vioblocksubtype { - vioblockopen = 0x0001, - vioblockclose = 0x0002, - vioblockread = 0x0003, - vioblockwrite = 0x0004, - vioblockflush = 0x0005, - vioblockcheck = 0x0007 -}; - -struct viocdlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - u32 token; - u64 offset; /* On open, max number of disks */ - u64 len; /* On open, size of the disk */ - u32 block_size; /* Only set on open */ - u32 media_size; /* Only set on open */ -}; - -enum viocdsubtype { - viocdopen = 0x0001, - viocdclose = 0x0002, - viocdread = 0x0003, - viocdwrite = 0x0004, - viocdlockdoor = 0x0005, - viocdgetinfo = 0x0006, - viocdcheck = 0x0007 -}; - -struct viotapelpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_type_result; - u16 tape; - u16 flags; - u32 token; - u64 len; - union { - struct { - u32 tape_op; - u32 count; - } op; - struct { - u32 type; - u32 resid; - u32 dsreg; - u32 gstat; - u32 erreg; - u32 file_no; - u32 block_no; - } get_status; - struct { - u32 block_no; - } get_pos; - } u; -}; - -enum viotapesubtype { - viotapeopen = 0x0001, - viotapeclose = 0x0002, - viotaperead = 0x0003, - viotapewrite = 0x0004, - viotapegetinfo = 0x0005, - viotapeop = 0x0006, - viotapegetpos = 0x0007, - viotapesetpos = 0x0008, - viotapegetstatus = 0x0009 -}; - -/* - * Each subtype can register a handler to process their events. - * The handler must have this interface. - */ -typedef void (vio_event_handler_t) (struct HvLpEvent * event); - -extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq); -extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq); -extern int vio_setHandler(int subtype, vio_event_handler_t * beh); -extern int vio_clearHandler(int subtype); -extern int viopath_isactive(HvLpIndex lp); -extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp); -extern HvLpInstanceId viopath_targetinst(HvLpIndex lp); -extern void vio_set_hostlp(void); -extern void *vio_get_event_buffer(int subtype); -extern void vio_free_event_buffer(int subtype, void *buffer); - -extern struct vio_dev *vio_create_viodasd(u32 unit); - -extern HvLpIndex viopath_hostLp; -extern HvLpIndex viopath_ourLp; - -#define VIOCHAR_MAX_DATA 200 - -#define VIOMAJOR_SUBTYPE_MASK 0xff00 -#define VIOMINOR_SUBTYPE_MASK 0x00ff -#define VIOMAJOR_SUBTYPE_SHIFT 8 - -#define VIOVERSION 0x0101 - -/* - * This is the general structure for VIO errors; each module should have - * a table of them, and each table should be terminated by an entry of - * { 0, 0, NULL }. Then, to find a specific error message, a module - * should pass its local table and the return code. - */ -struct vio_error_entry { - u16 rc; - int errno; - const char *msg; -}; -extern const struct vio_error_entry *vio_lookup_rc( - const struct vio_error_entry *local_table, u16 rc); - -enum viosubtypes { - viomajorsubtype_monitor = 0x0100, - viomajorsubtype_blockio = 0x0200, - viomajorsubtype_chario = 0x0300, - viomajorsubtype_config = 0x0400, - viomajorsubtype_cdio = 0x0500, - viomajorsubtype_tape = 0x0600, - viomajorsubtype_scsi = 0x0700 -}; - -enum vioconfigsubtype { - vioconfigget = 0x0001, -}; - -enum viorc { - viorc_good = 0x0000, - viorc_noConnection = 0x0001, - viorc_noReceiver = 0x0002, - viorc_noBufferAvailable = 0x0003, - viorc_invalidMessageType = 0x0004, - viorc_invalidRange = 0x0201, - viorc_invalidToken = 0x0202, - viorc_DMAError = 0x0203, - viorc_useError = 0x0204, - viorc_releaseError = 0x0205, - viorc_invalidDisk = 0x0206, - viorc_openRejected = 0x0301 -}; - -/* - * The structure of the events that flow between us and OS/400 for chario - * events. You can't mess with this unless the OS/400 side changes too. - */ -struct viocharlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 subtype_result_code; - u8 virtual_device; - u8 len; - u8 data[VIOCHAR_MAX_DATA]; -}; - -#define VIOCHAR_WINDOW 10 - -enum viocharsubtype { - viocharopen = 0x0001, - viocharclose = 0x0002, - viochardata = 0x0003, - viocharack = 0x0004, - viocharconfig = 0x0005 -}; - -enum viochar_rc { - viochar_rc_ebusy = 1 -}; - -#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h deleted file mode 100644 index ae6d206728af..000000000000 --- a/include/asm-powerpc/kdebug.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_POWERPC_KDEBUG_H -#define _ASM_POWERPC_KDEBUG_H -#ifdef __KERNEL__ - -/* Grossly misnamed. */ -enum die_val { - DIE_OOPS = 1, - DIE_IABR_MATCH, - DIE_DABR_MATCH, - DIE_BPT, - DIE_SSTEP, -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/include/asm-powerpc/kdump.h b/include/asm-powerpc/kdump.h deleted file mode 100644 index f6c93c716898..000000000000 --- a/include/asm-powerpc/kdump.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef _PPC64_KDUMP_H -#define _PPC64_KDUMP_H - -/* Kdump kernel runs at 32 MB, change at your peril. */ -#define KDUMP_KERNELBASE 0x2000000 - -/* How many bytes to reserve at zero for kdump. The reserve limit should - * be greater or equal to the trampoline's end address. - * Reserve to the end of the FWNMI area, see head_64.S */ -#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ - -#ifdef CONFIG_CRASH_DUMP - -#define KDUMP_TRAMPOLINE_START 0x0100 -#define KDUMP_TRAMPOLINE_END 0x3000 - -#define KDUMP_MIN_TCE_ENTRIES 2048 - -#endif /* CONFIG_CRASH_DUMP */ - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_CRASH_DUMP - -extern void reserve_kdump_trampoline(void); -extern void setup_kdump_trampoline(void); - -#else /* !CONFIG_CRASH_DUMP */ - -static inline void reserve_kdump_trampoline(void) { ; } -static inline void setup_kdump_trampoline(void) { ; } - -#endif /* CONFIG_CRASH_DUMP */ -#endif /* __ASSEMBLY__ */ - -#endif /* __PPC64_KDUMP_H */ diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h deleted file mode 100644 index acdcdc66f1b6..000000000000 --- a/include/asm-powerpc/kexec.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef _ASM_POWERPC_KEXEC_H -#define _ASM_POWERPC_KEXEC_H -#ifdef __KERNEL__ - -/* - * Maximum page that is mapped directly into kernel memory. - * XXX: Since we copy virt we can use any page we allocate - */ -#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) - -/* - * Maximum address we can reach in physical address mode. - * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. - */ -#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) - -/* Maximum address we can use for the control code buffer */ -#ifdef __powerpc64__ -#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) -#else -/* TASK_SIZE, probably left over from use_mm ?? */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#endif - -#define KEXEC_CONTROL_CODE_SIZE 4096 - -/* The native architecture */ -#ifdef __powerpc64__ -#define KEXEC_ARCH KEXEC_ARCH_PPC64 -#else -#define KEXEC_ARCH KEXEC_ARCH_PPC -#endif - -#ifndef __ASSEMBLY__ -#include - -typedef void (*crash_shutdown_t)(void); - -#ifdef CONFIG_KEXEC - -#ifdef __powerpc64__ -/* - * This function is responsible for capturing register states if coming - * via panic or invoking dump using sysrq-trigger. - */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) -{ - if (oldregs) - memcpy(newregs, oldregs, sizeof(*newregs)); - else { - /* FIXME Merge this with xmon_save_regs ?? */ - unsigned long tmp1, tmp2; - __asm__ __volatile__ ( - "std 0,0(%2)\n" - "std 1,8(%2)\n" - "std 2,16(%2)\n" - "std 3,24(%2)\n" - "std 4,32(%2)\n" - "std 5,40(%2)\n" - "std 6,48(%2)\n" - "std 7,56(%2)\n" - "std 8,64(%2)\n" - "std 9,72(%2)\n" - "std 10,80(%2)\n" - "std 11,88(%2)\n" - "std 12,96(%2)\n" - "std 13,104(%2)\n" - "std 14,112(%2)\n" - "std 15,120(%2)\n" - "std 16,128(%2)\n" - "std 17,136(%2)\n" - "std 18,144(%2)\n" - "std 19,152(%2)\n" - "std 20,160(%2)\n" - "std 21,168(%2)\n" - "std 22,176(%2)\n" - "std 23,184(%2)\n" - "std 24,192(%2)\n" - "std 25,200(%2)\n" - "std 26,208(%2)\n" - "std 27,216(%2)\n" - "std 28,224(%2)\n" - "std 29,232(%2)\n" - "std 30,240(%2)\n" - "std 31,248(%2)\n" - "mfmsr %0\n" - "std %0, 264(%2)\n" - "mfctr %0\n" - "std %0, 280(%2)\n" - "mflr %0\n" - "std %0, 288(%2)\n" - "bl 1f\n" - "1: mflr %1\n" - "std %1, 256(%2)\n" - "mtlr %0\n" - "mfxer %0\n" - "std %0, 296(%2)\n" - : "=&r" (tmp1), "=&r" (tmp2) - : "b" (newregs) - : "memory"); - } -} -#else -/* - * Provide a dummy definition to avoid build failures. Will remain - * empty till crash dump support is enabled. - */ -static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } -#endif /* !__powerpc64 __ */ - -extern void kexec_smp_wait(void); /* get and clear naca physid, wait for - master to copy new code to 0 */ -extern int crashing_cpu; -extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); -extern cpumask_t cpus_in_sr; -static inline int kexec_sr_activated(int cpu) -{ - return cpu_isset(cpu,cpus_in_sr); -} - -struct kimage; -struct pt_regs; -extern void default_machine_kexec(struct kimage *image); -extern int default_machine_kexec_prepare(struct kimage *image); -extern void default_machine_crash_shutdown(struct pt_regs *regs); -extern int crash_shutdown_register(crash_shutdown_t handler); -extern int crash_shutdown_unregister(crash_shutdown_t handler); - -extern void machine_kexec_simple(struct kimage *image); -extern void crash_kexec_secondary(struct pt_regs *regs); -extern int overlaps_crashkernel(unsigned long start, unsigned long size); -extern void reserve_crashkernel(void); - -#else /* !CONFIG_KEXEC */ -static inline int kexec_sr_activated(int cpu) { return 0; } -static inline void crash_kexec_secondary(struct pt_regs *regs) { } - -static inline int overlaps_crashkernel(unsigned long start, unsigned long size) -{ - return 0; -} - -static inline void reserve_crashkernel(void) { ; } - -static inline int crash_shutdown_register(crash_shutdown_t handler) -{ - return 0; -} - -static inline int crash_shutdown_unregister(crash_shutdown_t handler) -{ - return 0; -} - -#endif /* CONFIG_KEXEC */ -#endif /* ! __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h deleted file mode 100644 index d8520ef121f9..000000000000 --- a/include/asm-powerpc/keylargo.h +++ /dev/null @@ -1,261 +0,0 @@ -#ifndef _ASM_POWERPC_KEYLARGO_H -#define _ASM_POWERPC_KEYLARGO_H -#ifdef __KERNEL__ -/* - * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. - * - */ - -/* "Pangea" chipset has keylargo device-id 0x25 while core99 - * has device-id 0x22. The rev. of the pangea one is 0, so we - * fake an artificial rev. in keylargo_rev by oring 0x100 - */ -#define KL_PANGEA_REV 0x100 - -/* offset from base for feature control registers */ -#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ -#define KEYLARGO_FCR0 0x38 -#define KEYLARGO_FCR1 0x3c -#define KEYLARGO_FCR2 0x40 -#define KEYLARGO_FCR3 0x44 -#define KEYLARGO_FCR4 0x48 -#define KEYLARGO_FCR5 0x4c /* Pangea only */ - -/* K2 aditional FCRs */ -#define K2_FCR6 0x34 -#define K2_FCR7 0x30 -#define K2_FCR8 0x2c -#define K2_FCR9 0x28 -#define K2_FCR10 0x24 - -/* GPIO registers */ -#define KEYLARGO_GPIO_LEVELS0 0x50 -#define KEYLARGO_GPIO_LEVELS1 0x54 -#define KEYLARGO_GPIO_EXTINT_0 0x58 -#define KEYLARGO_GPIO_EXTINT_CNT 18 -#define KEYLARGO_GPIO_0 0x6A -#define KEYLARGO_GPIO_CNT 17 -#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 -#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 -#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 -#define KEYLARGO_GPIO_INPUT_DATA 0x02 - -/* K2 does only extint GPIOs and does 51 of them */ -#define K2_GPIO_EXTINT_0 0x58 -#define K2_GPIO_EXTINT_CNT 51 - -/* Specific GPIO regs */ - -#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) -#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ - -#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) - -/* Hrm... this one is only to be used on Pismo. It seeem to also - * control the timebase enable on other machines. Still to be - * experimented... --BenH. - */ -#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) -#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) - -#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) - -#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) -#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 -#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 - -#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) -#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) -#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) -#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) - -#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) -#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA - -#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) - -#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) -#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) -#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) -#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) -#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) - -/* - * Bits in feature control register. Those bits different for K2 are - * listed separately - */ -#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ -#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 -#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ -#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ -#define KL_MBCR_MB0_DEV_MASK 0x00007800 -#define KL_MBCR_MB0_DEV_POWER 0x00000400 -#define KL_MBCR_MB0_DEV_RESET 0x00000200 -#define KL_MBCR_MB0_ENABLE 0x00000100 -#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ -#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 -#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ -#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ -#define KL_MBCR_MB1_DEV_MASK 0x78000000 -#define KL_MBCR_MB1_DEV_POWER 0x04000000 -#define KL_MBCR_MB1_DEV_RESET 0x02000000 -#define KL_MBCR_MB1_ENABLE 0x01000000 - -#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ -#define KL0_SCC_A_INTF_ENABLE 0x00000002 -#define KL0_SCC_SLOWPCLK 0x00000004 -#define KL0_SCC_RESET 0x00000008 -#define KL0_SCCA_ENABLE 0x00000010 -#define KL0_SCCB_ENABLE 0x00000020 -#define KL0_SCC_CELL_ENABLE 0x00000040 -#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ -#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ -#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ -#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ -#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ -#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ -#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ -#define KL0_USB0_PAD_SUSPEND0 0x00040000 -#define KL0_USB0_PAD_SUSPEND1 0x00080000 -#define KL0_USB0_CELL_ENABLE 0x00100000 -#define KL0_USB1_PAD_SUSPEND0 0x00400000 -#define KL0_USB1_PAD_SUSPEND1 0x00800000 -#define KL0_USB1_CELL_ENABLE 0x01000000 -#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ - -#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ - KL0_SCC_SLOWPCLK | \ - KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) - -#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ -#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ -#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ -#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ -#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ -#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ -#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ -#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ -#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ -#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ -#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ -#define KL1_I2S0_CELL_ENABLE 0x00000400 -#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define KL1_I2S0_ENABLE 0x00002000 -#define KL1_I2S1_CELL_ENABLE 0x00020000 -#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define KL1_I2S1_ENABLE 0x00100000 -#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ -#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ -#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ -#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ -#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ -#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ - -#define KL2_IOBUS_ENABLE 0x00000002 -#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ -#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ -#define KL2_MPIC_ENABLE 0x00020000 -#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ -#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ -#define KL2_MEM_IS_BIG 0x04000000 -#define KL2_CARDSEL_16 0x08000000 - -#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ -#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ -#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ -#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ -#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ -#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ -#define KL3_CLK49_ENABLE 0x00000200 -#define KL3_CLK45_ENABLE 0x00000400 -#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ -#define KL3_TIMER_CLK18_ENABLE 0x00001000 -#define KL3_I2S1_CLK18_ENABLE 0x00002000 -#define KL3_I2S0_CLK18_ENABLE 0x00004000 -#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ -#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ -#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ -#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ - -/* Intrepid USB bus 2, port 0,1 */ -#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) - -/* Port 0,1 : bus 0, port 2,3 : bus 1 */ -#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) -#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) -#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) -#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) -#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) - -/* Pangea and Intrepid only */ -#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ -#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ -#define KL5_PWM_CLK32_EN 0x00000004 -#define KL5_CLK3_68_EN 0x00000010 -#define KL5_CLK32_EN 0x00000020 - - -/* K2 definitions */ -#define K2_FCR0_USB0_SWRESET 0x00200000 -#define K2_FCR0_USB1_SWRESET 0x02000000 -#define K2_FCR0_RING_PME_DISABLE 0x08000000 - -#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 -#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 -#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 -#define K2_FCR1_I2S0_RESET 0x00000800 -#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define K2_FCR1_I2S0_ENABLE 0x00002000 -#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 -#define K2_FCR1_FW_CLK_ENABLE 0x00008000 -#define K2_FCR1_FW_RESET_N 0x00010000 -#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000 -#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define K2_FCR1_I2S1_ENABLE 0x00100000 -#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 -#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 -#define K2_FCR1_GMAC_RESET_N 0x01000000 -#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 -#define K2_FCR1_SATA_POWER_DOWN 0x04000000 -#define K2_FCR1_SATA_RESET_N 0x08000000 -#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 -#define K2_FCR1_UATA_RESET_N 0x40000000 -#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 - -/* Shasta definitions */ -#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010 -#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040 -#define SH_FCR1_I2S2_ENABLE 0x00000080 -#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000 - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KEYLARGO_H */ diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h deleted file mode 100644 index 1399caf719ae..000000000000 --- a/include/asm-powerpc/kgdb.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * include/asm-powerpc/kgdb.h - * - * The PowerPC (32/64) specific defines / externs for KGDB. Based on - * the previous 32bit and 64bit specific files, which had the following - * copyrights: - * - * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) - * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) - * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) - * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) - * - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Author: Tom Rini - * - * 2006 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifdef __KERNEL__ -#ifndef __POWERPC_KGDB_H__ -#define __POWERPC_KGDB_H__ - -#ifndef __ASSEMBLY__ - -#define BREAK_INSTR_SIZE 4 -#define BUFMAX ((NUMREGBYTES * 2) + 512) -#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) -static inline void arch_kgdb_breakpoint(void) -{ - asm(".long 0x7d821008"); /* twge r2, r2 */ -} -#define CACHE_FLUSH_IS_SAFE 1 - -/* The number bytes of registers we have to save depends on a few - * things. For 64bit we default to not including vector registers and - * vector state registers. */ -#ifdef CONFIG_PPC64 -/* - * 64 bit (8 byte) registers: - * 32 gpr, 32 fpr, nip, msr, link, ctr - * 32 bit (4 byte) registers: - * ccr, xer, fpscr - */ -#define NUMREGBYTES ((68 * 8) + (3 * 4)) -#define NUMCRITREGBYTES 184 -#else /* CONFIG_PPC32 */ -/* On non-E500 family PPC32 we determine the size by picking the last - * register we need, but on E500 we skip sections so we list what we - * need to store, and add it up. */ -#ifndef CONFIG_E500 -#define MAXREG (PT_FPSCR+1) -#else -/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ -#define MAXREG ((32*2)+6+2+1) -#endif -#define NUMREGBYTES (MAXREG * sizeof(int)) -/* CR/LR, R1, R2, R13-R31 inclusive. */ -#define NUMCRITREGBYTES (23 * sizeof(int)) -#endif /* 32/64 */ -#endif /* !(__ASSEMBLY__) */ -#endif /* !__POWERPC_KGDB_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/kmap_types.h b/include/asm-powerpc/kmap_types.h deleted file mode 100644 index b6bac6f61c16..000000000000 --- a/include/asm-powerpc/kmap_types.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_POWERPC_KMAP_TYPES_H -#define _ASM_POWERPC_KMAP_TYPES_H - -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_PPC_SYNC_PAGE, - KM_PPC_SYNC_ICACHE, - KM_TYPE_NR -}; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h deleted file mode 100644 index d0e7701fa1f6..000000000000 --- a/include/asm-powerpc/kprobes.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef _ASM_POWERPC_KPROBES_H -#define _ASM_POWERPC_KPROBES_H -#ifdef __KERNEL__ -/* - * Kernel Probes (KProbes) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S Kernel - * Probes initial implementation ( includes suggestions from - * Rusty Russell). - * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli - * - */ -#include -#include -#include - -#define __ARCH_WANT_KPROBES_INSN_SLOT - -struct pt_regs; -struct kprobe; - -typedef unsigned int kprobe_opcode_t; -#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ -#define MAX_INSN_SIZE 1 - -#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) -#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) -#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) -#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) - -#ifdef CONFIG_PPC64 -/* - * 64bit powerpc uses function descriptors. - * Handle cases where: - * - User passes a <.symbol> or - * - User passes a or - * - User passes a non-existant symbol, kallsyms_lookup_name - * returns 0. Don't deref the NULL pointer in that case - */ -#define kprobe_lookup_name(name, addr) \ -{ \ - addr = (kprobe_opcode_t *)kallsyms_lookup_name(name); \ - if (addr) { \ - char *colon; \ - if ((colon = strchr(name, ':')) != NULL) { \ - colon++; \ - if (*colon != '\0' && *colon != '.') \ - addr = *(kprobe_opcode_t **)addr; \ - } else if (name[0] != '.') \ - addr = *(kprobe_opcode_t **)addr; \ - } else { \ - char dot_name[KSYM_NAME_LEN]; \ - dot_name[0] = '.'; \ - dot_name[1] = '\0'; \ - strncat(dot_name, name, KSYM_NAME_LEN - 2); \ - addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \ - } \ -} - -#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ - IS_TWI(instr) || IS_TDI(instr)) -#else -/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */ -#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) -#endif - -#define flush_insn_slot(p) do { } while (0) -#define kretprobe_blacklist_size 0 - -void kretprobe_trampoline(void); -extern void arch_remove_kprobe(struct kprobe *p); - -/* Architecture specific copy of original instruction */ -struct arch_specific_insn { - /* copy of original instruction */ - kprobe_opcode_t *insn; - /* - * Set in kprobes code, initially to 0. If the instruction can be - * eumulated, this is set to 1, if not, to -1. - */ - int boostable; -}; - -struct prev_kprobe { - struct kprobe *kp; - unsigned long status; - unsigned long saved_msr; -}; - -/* per-cpu kprobe control block */ -struct kprobe_ctlblk { - unsigned long kprobe_status; - unsigned long kprobe_saved_msr; - struct pt_regs jprobe_saved_regs; - struct prev_kprobe prev_kprobe; -}; - -extern int kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data); -extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h deleted file mode 100644 index f993e4198d5c..000000000000 --- a/include/asm-powerpc/kvm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2007 - * - * Authors: Hollis Blanchard - */ - -#ifndef __LINUX_KVM_POWERPC_H -#define __LINUX_KVM_POWERPC_H - -#include - -struct kvm_regs { - __u64 pc; - __u64 cr; - __u64 ctr; - __u64 lr; - __u64 xer; - __u64 msr; - __u64 srr0; - __u64 srr1; - __u64 pid; - - __u64 sprg0; - __u64 sprg1; - __u64 sprg2; - __u64 sprg3; - __u64 sprg4; - __u64 sprg5; - __u64 sprg6; - __u64 sprg7; - - __u64 gpr[32]; -}; - -struct kvm_sregs { -}; - -struct kvm_fpu { - __u64 fpr[32]; -}; - -#endif /* __LINUX_KVM_POWERPC_H */ diff --git a/include/asm-powerpc/kvm_asm.h b/include/asm-powerpc/kvm_asm.h deleted file mode 100644 index 2197764796d9..000000000000 --- a/include/asm-powerpc/kvm_asm.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_ASM_H__ -#define __POWERPC_KVM_ASM_H__ - -/* IVPR must be 64KiB-aligned. */ -#define VCPU_SIZE_ORDER 4 -#define VCPU_SIZE_LOG (VCPU_SIZE_ORDER + 12) -#define VCPU_TLB_PGSZ PPC44x_TLB_64K -#define VCPU_SIZE_BYTES (1< - */ - -#ifndef __POWERPC_KVM_HOST_H__ -#define __POWERPC_KVM_HOST_H__ - -#include -#include -#include -#include -#include - -#define KVM_MAX_VCPUS 1 -#define KVM_MEMORY_SLOTS 32 -/* memory slots that does not exposed to userspace */ -#define KVM_PRIVATE_MEM_SLOTS 4 - -#define KVM_COALESCED_MMIO_PAGE_OFFSET 1 - -/* We don't currently support large pages. */ -#define KVM_PAGES_PER_HPAGE (1<<31) - -struct kvm; -struct kvm_run; -struct kvm_vcpu; - -struct kvm_vm_stat { - u32 remote_tlb_flush; -}; - -struct kvm_vcpu_stat { - u32 sum_exits; - u32 mmio_exits; - u32 dcr_exits; - u32 signal_exits; - u32 light_exits; - /* Account for special types of light exits: */ - u32 itlb_real_miss_exits; - u32 itlb_virt_miss_exits; - u32 dtlb_real_miss_exits; - u32 dtlb_virt_miss_exits; - u32 syscall_exits; - u32 isi_exits; - u32 dsi_exits; - u32 emulated_inst_exits; - u32 dec_exits; - u32 ext_intr_exits; - u32 halt_wakeup; -}; - -struct tlbe { - u32 tid; /* Only the low 8 bits are used. */ - u32 word0; - u32 word1; - u32 word2; -}; - -struct kvm_arch { -}; - -struct kvm_vcpu_arch { - /* Unmodified copy of the guest's TLB. */ - struct tlbe guest_tlb[PPC44x_TLB_SIZE]; - /* TLB that's actually used when the guest is running. */ - struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; - /* Pages which are referenced in the shadow TLB. */ - struct page *shadow_pages[PPC44x_TLB_SIZE]; - /* Copy of the host's TLB. */ - struct tlbe host_tlb[PPC44x_TLB_SIZE]; - - u32 host_stack; - u32 host_pid; - - u64 fpr[32]; - u32 gpr[32]; - - u32 pc; - u32 cr; - u32 ctr; - u32 lr; - u32 xer; - - u32 msr; - u32 mmucr; - u32 sprg0; - u32 sprg1; - u32 sprg2; - u32 sprg3; - u32 sprg4; - u32 sprg5; - u32 sprg6; - u32 sprg7; - u32 srr0; - u32 srr1; - u32 csrr0; - u32 csrr1; - u32 dsrr0; - u32 dsrr1; - u32 dear; - u32 esr; - u32 dec; - u32 decar; - u32 tbl; - u32 tbu; - u32 tcr; - u32 tsr; - u32 ivor[16]; - u32 ivpr; - u32 pir; - u32 pid; - u32 pvr; - u32 ccr0; - u32 ccr1; - u32 dbcr0; - u32 dbcr1; - - u32 last_inst; - u32 fault_dear; - u32 fault_esr; - gpa_t paddr_accessed; - - u8 io_gpr; /* GPR used as IO source/target */ - u8 mmio_is_bigendian; - u8 dcr_needed; - u8 dcr_is_write; - - u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ - - struct timer_list dec_timer; - unsigned long pending_exceptions; -}; - -struct kvm_guest_debug { - int enabled; - unsigned long bp[4]; - int singlestep; -}; - -#endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/include/asm-powerpc/kvm_para.h b/include/asm-powerpc/kvm_para.h deleted file mode 100644 index 2d48f6a63d0b..000000000000 --- a/include/asm-powerpc/kvm_para.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_PARA_H__ -#define __POWERPC_KVM_PARA_H__ - -#ifdef __KERNEL__ - -static inline int kvm_para_available(void) -{ - return 0; -} - -static inline unsigned int kvm_arch_para_features(void) -{ - return 0; -} - -#endif /* __KERNEL__ */ - -#endif /* __POWERPC_KVM_PARA_H__ */ diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h deleted file mode 100644 index a8b068792260..000000000000 --- a/include/asm-powerpc/kvm_ppc.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - * - * Copyright IBM Corp. 2008 - * - * Authors: Hollis Blanchard - */ - -#ifndef __POWERPC_KVM_PPC_H__ -#define __POWERPC_KVM_PPC_H__ - -/* This file exists just so we can dereference kvm_vcpu, avoiding nested header - * dependencies. */ - -#include -#include -#include -#include -#include - -struct kvm_tlb { - struct tlbe guest_tlb[PPC44x_TLB_SIZE]; - struct tlbe shadow_tlb[PPC44x_TLB_SIZE]; -}; - -enum emulation_result { - EMULATE_DONE, /* no further processing */ - EMULATE_DO_MMIO, /* kvm_run filled with MMIO request */ - EMULATE_DO_DCR, /* kvm_run filled with DCR request */ - EMULATE_FAIL, /* can't emulate this instruction */ -}; - -extern const unsigned char exception_priority[]; -extern const unsigned char priority_exception[]; - -extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); -extern char kvmppc_handlers_start[]; -extern unsigned long kvmppc_handler_len; - -extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); -extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, - unsigned int rt, unsigned int bytes, - int is_bigendian); -extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, - u32 val, unsigned int bytes, int is_bigendian); - -extern int kvmppc_emulate_instruction(struct kvm_run *run, - struct kvm_vcpu *vcpu); -extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); - -extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, - u64 asid, u32 flags); -extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, - gva_t eend, u32 asid); -extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode); - -extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu); - -static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception) -{ - unsigned int priority = exception_priority[exception]; - set_bit(priority, &vcpu->arch.pending_exceptions); -} - -static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception) -{ - unsigned int priority = exception_priority[exception]; - clear_bit(priority, &vcpu->arch.pending_exceptions); -} - -/* Helper function for "full" MSR writes. No need to call this if only EE is - * changing. */ -static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr) -{ - if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR)) - kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR); - - vcpu->arch.msr = new_msr; - - if (vcpu->arch.msr & MSR_WE) - kvm_vcpu_block(vcpu); -} - -#endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h deleted file mode 100644 index 4d8518049f4d..000000000000 --- a/include/asm-powerpc/libata-portmap.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H -#define __ASM_POWERPC_LIBATA_PORTMAP_H - -#define ATA_PRIMARY_CMD 0x1F0 -#define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) - -#define ATA_SECONDARY_CMD 0x170 -#define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) - -#endif diff --git a/include/asm-powerpc/linkage.h b/include/asm-powerpc/linkage.h deleted file mode 100644 index e1c4ac1cc4ba..000000000000 --- a/include/asm-powerpc/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_LINKAGE_H -#define _ASM_POWERPC_LINKAGE_H - -/* Nothing to see here... */ - -#endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/include/asm-powerpc/lmb.h b/include/asm-powerpc/lmb.h deleted file mode 100644 index 6f5fdf0a19ae..000000000000 --- a/include/asm-powerpc/lmb.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASM_POWERPC_LMB_H -#define _ASM_POWERPC_LMB_H - -#include - -#define LMB_DBG(fmt...) udbg_printf(fmt) - -#ifdef CONFIG_PPC32 -extern phys_addr_t lowmem_end_addr; -#define LMB_REAL_LIMIT lowmem_end_addr -#else -#define LMB_REAL_LIMIT 0 -#endif - -#endif /* _ASM_POWERPC_LMB_H */ diff --git a/include/asm-powerpc/local.h b/include/asm-powerpc/local.h deleted file mode 100644 index 612d83276653..000000000000 --- a/include/asm-powerpc/local.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef _ARCH_POWERPC_LOCAL_H -#define _ARCH_POWERPC_LOCAL_H - -#include -#include - -typedef struct -{ - atomic_long_t a; -} local_t; - -#define LOCAL_INIT(i) { ATOMIC_LONG_INIT(i) } - -#define local_read(l) atomic_long_read(&(l)->a) -#define local_set(l,i) atomic_long_set(&(l)->a, (i)) - -#define local_add(i,l) atomic_long_add((i),(&(l)->a)) -#define local_sub(i,l) atomic_long_sub((i),(&(l)->a)) -#define local_inc(l) atomic_long_inc(&(l)->a) -#define local_dec(l) atomic_long_dec(&(l)->a) - -static __inline__ long local_add_return(long a, local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_add_return\n\ - add %0,%1,%0\n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%2 \n\ - bne- 1b" - : "=&r" (t) - : "r" (a), "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) - -static __inline__ long local_sub_return(long a, local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_sub_return\n\ - subf %0,%1,%0\n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%2 \n\ - bne- 1b" - : "=&r" (t) - : "r" (a), "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -static __inline__ long local_inc_return(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_inc_return\n\ - addic %0,%0,1\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1 \n\ - bne- 1b" - : "=&r" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -/* - * local_inc_and_test - increment and test - * @l: pointer of type local_t - * - * Atomically increments @l by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define local_inc_and_test(l) (local_inc_return(l) == 0) - -static __inline__ long local_dec_return(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_return\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1\n\ - bne- 1b" - : "=&r" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -#define local_cmpxchg(l, o, n) \ - (cmpxchg_local(&((l)->a.counter), (o), (n))) -#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n))) - -/** - * local_add_unless - add unless the number is a given value - * @l: pointer of type local_t - * @a: the amount to add to v... - * @u: ...unless v is equal to u. - * - * Atomically adds @a to @l, so long as it was not @u. - * Returns non-zero if @l was not @u, and zero otherwise. - */ -static __inline__ int local_add_unless(local_t *l, long a, long u) -{ - long t; - - __asm__ __volatile__ ( -"1:" PPC_LLARX "%0,0,%1 # local_add_unless\n\ - cmpw 0,%0,%3 \n\ - beq- 2f \n\ - add %0,%2,%0 \n" - PPC405_ERR77(0,%2) - PPC_STLCX "%0,0,%1 \n\ - bne- 1b \n" -" subf %0,%2,%0 \n\ -2:" - : "=&r" (t) - : "r" (&(l->a.counter)), "r" (a), "r" (u) - : "cc", "memory"); - - return t != u; -} - -#define local_inc_not_zero(l) local_add_unless((l), 1, 0) - -#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0) -#define local_dec_and_test(l) (local_dec_return((l)) == 0) - -/* - * Atomically test *l and decrement if it is greater than 0. - * The function returns the old value of *l minus 1. - */ -static __inline__ long local_dec_if_positive(local_t *l) -{ - long t; - - __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_if_positive\n\ - cmpwi %0,1\n\ - addi %0,%0,-1\n\ - blt- 2f\n" - PPC405_ERR77(0,%1) - PPC_STLCX "%0,0,%1\n\ - bne- 1b" - "\n\ -2:" : "=&b" (t) - : "r" (&(l->a.counter)) - : "cc", "memory"); - - return t; -} - -/* Use these for per-cpu local_t variables: on some archs they are - * much more efficient than these naive implementations. Note they take - * a variable, not an address. - */ - -#define __local_inc(l) ((l)->a.counter++) -#define __local_dec(l) ((l)->a.counter++) -#define __local_add(i,l) ((l)->a.counter+=(i)) -#define __local_sub(i,l) ((l)->a.counter-=(i)) - -/* Need to disable preemption for the cpu local counters otherwise we could - still access a variable of a previous CPU in a non atomic way. */ -#define cpu_local_wrap_v(l) \ - ({ local_t res__; \ - preempt_disable(); \ - res__ = (l); \ - preempt_enable(); \ - res__; }) -#define cpu_local_wrap(l) \ - ({ preempt_disable(); \ - l; \ - preempt_enable(); }) \ - -#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l))) -#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i))) -#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l))) -#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l))) -#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l))) -#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l))) - -#define __cpu_local_inc(l) cpu_local_inc(l) -#define __cpu_local_dec(l) cpu_local_dec(l) -#define __cpu_local_add(i, l) cpu_local_add((i), (l)) -#define __cpu_local_sub(i, l) cpu_local_sub((i), (l)) - -#endif /* _ARCH_POWERPC_LOCAL_H */ diff --git a/include/asm-powerpc/lppaca.h b/include/asm-powerpc/lppaca.h deleted file mode 100644 index 2fe268b10333..000000000000 --- a/include/asm-powerpc/lppaca.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * lppaca.h - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_LPPACA_H -#define _ASM_POWERPC_LPPACA_H -#ifdef __KERNEL__ - -//============================================================================= -// -// This control block contains the data that is shared between the -// hypervisor (PLIC) and the OS. -// -// -//---------------------------------------------------------------------------- -#include -#include -#include - -/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k - * alignment is sufficient to prevent this */ -struct lppaca { -//============================================================================= -// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data -// NOTE: The xDynXyz fields are fields that will be dynamically changed by -// PLIC when preparing to bring a processor online or when dispatching a -// virtual processor! -//============================================================================= - u32 desc; // Eye catcher 0xD397D781 x00-x03 - u16 size; // Size of this struct x04-x05 - u16 reserved1; // Reserved x06-x07 - u16 reserved2:14; // Reserved x08-x09 - u8 shared_proc:1; // Shared processor indicator ... - u8 secondary_thread:1; // Secondary thread indicator ... - volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A - u8 secondary_thread_count; // Secondary thread count x0B-x0B - volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D - volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F - u32 decr_val; // Value for Decr programming x10-x13 - u32 pmc_val; // Value for PMC regs x14-x17 - volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B - volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F - volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23 - u32 dsei_data; // DSEI data x24-x27 - u64 sprg3; // SPRG3 value x28-x2F - u8 reserved3[80]; // Reserved x30-x7F - -//============================================================================= -// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data -//============================================================================= - // This Dword contains a byte for each type of interrupt that can occur. - // The IPI is a count while the others are just a binary 1 or 0. - union { - u64 any_int; - struct { - u16 reserved; // Reserved - cleared by #mpasmbl - u8 xirr_int; // Indicates xXirrValue is valid or Immed IO - u8 ipi_cnt; // IPI Count - u8 decr_int; // DECR interrupt occurred - u8 pdc_int; // PDC interrupt occurred - u8 quantum_int; // Interrupt quantum reached - u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending - } fields; - } int_dword; - - // Whenever any fields in this Dword are set then PLIC will defer the - // processing of external interrupts. Note that PLIC will store the - // XIRR directly into the xXirrValue field so that another XIRR will - // not be presented until this one clears. The layout of the low - // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the - // entire Dword is zero or not. A non-zero value in the low order - // 2-bytes will result in SLIC being granted the highest thread - // priority upon return. A 0 will return to SLIC as medium priority. - u64 plic_defer_ints_area; // Entire Dword - - // Used to pass the real SRR0/1 from PLIC to SLIC as well as to - // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid. - u64 saved_srr0; // Saved SRR0 x10-x17 - u64 saved_srr1; // Saved SRR1 x18-x1F - - // Used to pass parms from the OS to PLIC for SetAsrAndRfid - u64 saved_gpr3; // Saved GPR3 x20-x27 - u64 saved_gpr4; // Saved GPR4 x28-x2F - u64 saved_gpr5; // Saved GPR5 x30-x37 - - u8 reserved4; // Reserved x38-x38 - u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 - u8 fpregs_in_use; // FP regs in use x3A-x3A - u8 pmcregs_in_use; // PMC regs in use x3B-x3B - volatile u32 saved_decr; // Saved Decr Value x3C-x3F - volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47 - volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F - u64 tot_plic_latency; // Accumulated PLIC latency x50-x57 - u64 wait_state_cycles; // Wait cycles for this proc x58-x5F - u64 end_of_quantum; // TB at end of quantum x60-x67 - u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F - u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77 - volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B - u16 slb_count; // # of SLBs to maintain x7C-x7D - u8 idle; // Indicate OS is idle x7E - u8 vmxregs_in_use; // VMX registers in use x7F - - -//============================================================================= -// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors -//============================================================================= - // This is the yield_count. An "odd" value (low bit on) means that - // the processor is yielded (either because of an OS yield or a PLIC - // preempt). An even value implies that the processor is currently - // executing. - // NOTE: This value will ALWAYS be zero for dedicated processors and - // will NEVER be zero for shared processors (ie, initialized to a 1). - volatile u32 yield_count; // PLIC increments each dispatchx00-x03 - u32 reserved6; - volatile u64 cmo_faults; // CMO page fault count x08-x0F - volatile u64 cmo_fault_time; // CMO page fault time x10-x17 - u8 reserved7[104]; // Reserved x18-x7F - -//============================================================================= -// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data -//============================================================================= - u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF -} __attribute__((__aligned__(0x400))); - -extern struct lppaca lppaca[]; - -/* - * SLB shadow buffer structure as defined in the PAPR. The save_area - * contains adjacent ESID and VSID pairs for each shadowed SLB. The - * ESID is stored in the lower 64bits, then the VSID. - */ -struct slb_shadow { - u32 persistent; // Number of persistent SLBs x00-x03 - u32 buffer_length; // Total shadow buffer length x04-x07 - u64 reserved; // Alignment x08-x0f - struct { - u64 esid; - u64 vsid; - } save_area[SLB_NUM_BOLTED]; // x10-x40 -} ____cacheline_aligned; - -extern struct slb_shadow slb_shadow[]; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/include/asm-powerpc/lv1call.h b/include/asm-powerpc/lv1call.h deleted file mode 100644 index 81713acf7529..000000000000 --- a/include/asm-powerpc/lv1call.h +++ /dev/null @@ -1,348 +0,0 @@ -/* - * PS3 hvcall interface. - * - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006 Sony Corp. - * Copyright 2003, 2004 (c) MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_ASM_POWERPC_LV1CALL_H) -#define _ASM_POWERPC_LV1CALL_H - -#if !defined(__ASSEMBLY__) - -#include - -/* lv1 call declaration macros */ - -#define LV1_1_IN_ARG_DECL u64 in_1 -#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 -#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 -#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 -#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 -#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 -#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 -#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 -#define LV1_1_OUT_ARG_DECL u64 *out_1 -#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 -#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 -#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 -#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 -#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 -#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 - -#define LV1_0_IN_0_OUT_ARG_DECL void -#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL -#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL -#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL -#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL -#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL -#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL -#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL - -#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL -#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL -#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL - -#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL -#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL -#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL - -#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL -#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL -#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL - -#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL -#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL -#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL - -#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL -#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL -#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL - -#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL -#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL -#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL - -#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL -#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL -#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL - -#define LV1_1_IN_ARGS in_1 -#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 -#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 -#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 -#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 -#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 -#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 -#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 - -#define LV1_1_OUT_ARGS out_1 -#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 -#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 -#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 -#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 -#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 -#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 - -#define LV1_0_IN_0_OUT_ARGS -#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS -#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS -#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS -#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS -#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS -#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS -#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS - -#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS -#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS -#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS - -#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS -#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS -#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS - -#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS -#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS -#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS - -#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS -#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS -#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS - -#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS -#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS -#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS - -#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS -#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS -#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS - -#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS -#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS -#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS - -/* - * This LV1_CALL() macro is for use by callers. It expands into an - * inline call wrapper and an underscored HV call declaration. The - * wrapper can be used to instrument the lv1 call interface. The - * file lv1call.S defines its own LV1_CALL() macro to expand into - * the actual underscored call definition. - */ - -#if !defined(LV1_CALL) -#define LV1_CALL(name, in, out, num) \ - extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ - static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ - {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} -#endif - -#endif /* !defined(__ASSEMBLY__) */ - -/* lv1 call table */ - -LV1_CALL(allocate_memory, 4, 2, 0 ) -LV1_CALL(write_htab_entry, 4, 0, 1 ) -LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) -LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) -LV1_CALL(get_virtual_address_space_id_of_ppe, 1, 1, 4 ) -LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) -LV1_CALL(select_virtual_address_space, 1, 0, 7 ) -LV1_CALL(pause, 1, 0, 9 ) -LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) -LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) -LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) -LV1_CALL(release_memory, 1, 0, 13 ) -LV1_CALL(put_iopte, 5, 0, 15 ) -LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) -LV1_CALL(construct_event_receive_port, 0, 1, 18 ) -LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) -LV1_CALL(send_event_locally, 1, 0, 24 ) -LV1_CALL(end_of_interrupt, 1, 0, 27 ) -LV1_CALL(connect_irq_plug, 2, 0, 28 ) -LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) -LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) -LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) -LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) -LV1_CALL(destruct_logical_spe, 1, 0, 54 ) -LV1_CALL(construct_logical_spe, 7, 6, 57 ) -LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) -LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) -LV1_CALL(disable_logical_spe, 2, 0, 65 ) -LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) -LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) -LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) -LV1_CALL(set_interrupt_mask, 5, 0, 73 ) -LV1_CALL(get_logical_partition_id, 0, 1, 74 ) -LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) -LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) -LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) -LV1_CALL(create_repository_node, 6, 0, 90 ) -LV1_CALL(get_repository_node_value, 5, 2, 91 ) -LV1_CALL(modify_repository_node_value, 6, 0, 92 ) -LV1_CALL(remove_repository_node, 4, 0, 93 ) -LV1_CALL(read_htab_entries, 2, 5, 95 ) -LV1_CALL(set_dabr, 2, 0, 96 ) -LV1_CALL(get_total_execution_time, 2, 1, 103 ) -LV1_CALL(allocate_io_segment, 3, 1, 116 ) -LV1_CALL(release_io_segment, 2, 0, 117 ) -LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) -LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) -LV1_CALL(map_htab, 1, 1, 122 ) -LV1_CALL(unmap_htab, 1, 0, 123 ) -LV1_CALL(get_version_info, 0, 1, 127 ) -LV1_CALL(insert_htab_entry, 6, 3, 158 ) -LV1_CALL(read_virtual_uart, 3, 1, 162 ) -LV1_CALL(write_virtual_uart, 3, 1, 163 ) -LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) -LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) -LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) -LV1_CALL(open_device, 3, 0, 170 ) -LV1_CALL(close_device, 2, 0, 171 ) -LV1_CALL(map_device_mmio_region, 5, 1, 172 ) -LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) -LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) -LV1_CALL(free_device_dma_region, 3, 0, 175 ) -LV1_CALL(map_device_dma_region, 6, 0, 176 ) -LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) -LV1_CALL(net_add_multicast_address, 4, 0, 185 ) -LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) -LV1_CALL(net_start_tx_dma, 4, 0, 187 ) -LV1_CALL(net_stop_tx_dma, 3, 0, 188 ) -LV1_CALL(net_start_rx_dma, 4, 0, 189 ) -LV1_CALL(net_stop_rx_dma, 3, 0, 190 ) -LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) -LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) -LV1_CALL(net_control, 6, 2, 194 ) -LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) -LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) -LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) -LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) -LV1_CALL(enable_logical_spe, 2, 0, 207 ) -LV1_CALL(gpu_open, 1, 0, 210 ) -LV1_CALL(gpu_close, 0, 0, 211 ) -LV1_CALL(gpu_device_map, 1, 2, 212 ) -LV1_CALL(gpu_device_unmap, 1, 0, 213 ) -LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) -LV1_CALL(gpu_memory_free, 1, 0, 216 ) -LV1_CALL(gpu_context_allocate, 2, 5, 217 ) -LV1_CALL(gpu_context_free, 1, 0, 218 ) -LV1_CALL(gpu_context_iomap, 5, 0, 221 ) -LV1_CALL(gpu_context_attribute, 6, 0, 225 ) -LV1_CALL(gpu_context_intr, 1, 1, 227 ) -LV1_CALL(gpu_attribute, 5, 0, 228 ) -LV1_CALL(get_rtc, 0, 2, 232 ) -LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) -LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) -LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) -LV1_CALL(storage_read, 6, 1, 245 ) -LV1_CALL(storage_write, 6, 1, 246 ) -LV1_CALL(storage_send_device_command, 6, 1, 248 ) -LV1_CALL(storage_get_async_status, 1, 2, 249 ) -LV1_CALL(storage_check_async_status, 2, 1, 254 ) -LV1_CALL(panic, 1, 0, 255 ) -LV1_CALL(construct_lpm, 6, 3, 140 ) -LV1_CALL(destruct_lpm, 1, 0, 141 ) -LV1_CALL(start_lpm, 1, 0, 142 ) -LV1_CALL(stop_lpm, 1, 1, 143 ) -LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) -LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) -LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) -LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) -LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) -LV1_CALL(set_lpm_general_control, 5, 2, 149 ) -LV1_CALL(set_lpm_interval, 3, 1, 150 ) -LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) -LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) -LV1_CALL(set_lpm_group_control, 3, 1, 153 ) -LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) -LV1_CALL(set_lpm_counter, 5, 2, 155 ) -LV1_CALL(set_lpm_signal, 7, 0, 156 ) -LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) - -#endif diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h deleted file mode 100644 index 893aafd87fde..000000000000 --- a/include/asm-powerpc/machdep.h +++ /dev/null @@ -1,365 +0,0 @@ -#ifndef _ASM_POWERPC_MACHDEP_H -#define _ASM_POWERPC_MACHDEP_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -#include - -/* We export this macro for external modules like Alsa to know if - * ppc_md.feature_call is implemented or not - */ -#define CONFIG_PPC_HAS_FEATURE_CALLS - -struct pt_regs; -struct pci_bus; -struct device_node; -struct iommu_table; -struct rtc_time; -struct file; -struct pci_controller; -#ifdef CONFIG_KEXEC -struct kimage; -#endif - -#ifdef CONFIG_SMP -struct smp_ops_t { - void (*message_pass)(int target, int msg); - int (*probe)(void); - void (*kick_cpu)(int nr); - void (*setup_cpu)(int nr); - void (*take_timebase)(void); - void (*give_timebase)(void); - int (*cpu_enable)(unsigned int nr); - int (*cpu_disable)(void); - void (*cpu_die)(unsigned int nr); - int (*cpu_bootable)(unsigned int nr); -}; -#endif - -struct machdep_calls { - char *name; -#ifdef CONFIG_PPC64 - void (*hpte_invalidate)(unsigned long slot, - unsigned long va, - int psize, int ssize, - int local); - long (*hpte_updatepp)(unsigned long slot, - unsigned long newpp, - unsigned long va, - int psize, int ssize, - int local); - void (*hpte_updateboltedpp)(unsigned long newpp, - unsigned long ea, - int psize, int ssize); - long (*hpte_insert)(unsigned long hpte_group, - unsigned long va, - unsigned long prpn, - unsigned long rflags, - unsigned long vflags, - int psize, int ssize); - long (*hpte_remove)(unsigned long hpte_group); - void (*hpte_removebolted)(unsigned long ea, - int psize, int ssize); - void (*flush_hash_range)(unsigned long number, int local); - - /* special for kexec, to be called in real mode, linar mapping is - * destroyed as well */ - void (*hpte_clear_all)(void); - - int (*tce_build)(struct iommu_table *tbl, - long index, - long npages, - unsigned long uaddr, - enum dma_data_direction direction, - struct dma_attrs *attrs); - void (*tce_free)(struct iommu_table *tbl, - long index, - long npages); - unsigned long (*tce_get)(struct iommu_table *tbl, - long index); - void (*tce_flush)(struct iommu_table *tbl); - void (*pci_dma_dev_setup)(struct pci_dev *dev); - void (*pci_dma_bus_setup)(struct pci_bus *bus); - - void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, - unsigned long flags); - void (*iounmap)(volatile void __iomem *token); - -#ifdef CONFIG_PM - void (*iommu_save)(void); - void (*iommu_restore)(void); -#endif -#endif /* CONFIG_PPC64 */ - - int (*probe)(void); - void (*setup_arch)(void); /* Optional, may be NULL */ - void (*init_early)(void); - /* Optional, may be NULL. */ - void (*show_cpuinfo)(struct seq_file *m); - void (*show_percpuinfo)(struct seq_file *m, int i); - - void (*init_IRQ)(void); - unsigned int (*get_irq)(void); -#ifdef CONFIG_KEXEC - void (*kexec_cpu_down)(int crash_shutdown, int secondary); -#endif - - /* PCI stuff */ - /* Called after scanning the bus, before allocating resources */ - void (*pcibios_fixup)(void); - int (*pci_probe_mode)(struct pci_bus *); - void (*pci_irq_fixup)(struct pci_dev *dev); - - /* To setup PHBs when using automatic OF platform driver for PCI */ - int (*pci_setup_phb)(struct pci_controller *host); - -#ifdef CONFIG_PCI_MSI - int (*msi_check_device)(struct pci_dev* dev, - int nvec, int type); - int (*setup_msi_irqs)(struct pci_dev *dev, - int nvec, int type); - void (*teardown_msi_irqs)(struct pci_dev *dev); -#endif - - void (*restart)(char *cmd); - void (*power_off)(void); - void (*halt)(void); - void (*panic)(char *str); - void (*cpu_die)(void); - - long (*time_init)(void); /* Optional, may be NULL */ - - int (*set_rtc_time)(struct rtc_time *); - void (*get_rtc_time)(struct rtc_time *); - unsigned long (*get_boot_time)(void); - unsigned char (*rtc_read_val)(int addr); - void (*rtc_write_val)(int addr, unsigned char val); - - void (*calibrate_decr)(void); - - void (*progress)(char *, unsigned short); - - /* Interface for platform error logging */ - void (*log_error)(char *buf, unsigned int err_type, int fatal); - - unsigned char (*nvram_read_val)(int addr); - void (*nvram_write_val)(int addr, unsigned char val); - ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index); - ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index); - ssize_t (*nvram_size)(void); - void (*nvram_sync)(void); - - /* Exception handlers */ - int (*system_reset_exception)(struct pt_regs *regs); - int (*machine_check_exception)(struct pt_regs *regs); - - /* Motherboard/chipset features. This is a kind of general purpose - * hook used to control some machine specific features (like reset - * lines, chip power control, etc...). - */ - long (*feature_call)(unsigned int feature, ...); - - /* Get legacy PCI/IDE interrupt mapping */ - int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel); - - /* Get access protection for /dev/mem */ - pgprot_t (*phys_mem_access_prot)(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t vma_prot); - - /* Idle loop for this platform, leave empty for default idle loop */ - void (*idle_loop)(void); - - /* - * Function for waiting for work with reduced power in idle loop; - * called with interrupts disabled. - */ - void (*power_save)(void); - - /* Function to enable performance monitor counters for this - platform, called once per cpu. */ - void (*enable_pmcs)(void); - - /* Set DABR for this platform, leave empty for default implemenation */ - int (*set_dabr)(unsigned long dabr); - -#ifdef CONFIG_PPC32 /* XXX for now */ - /* A general init function, called by ppc_init in init/main.c. - May be NULL. */ - void (*init)(void); - - void (*kgdb_map_scc)(void); - - /* - * optional PCI "hooks" - */ - /* Called in indirect_* to avoid touching devices */ - int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); - - /* Called at then very end of pcibios_init() */ - void (*pcibios_after_init)(void); - -#endif /* CONFIG_PPC32 */ - - /* Called after PPC generic resource fixup to perform - machine specific fixups */ - void (*pcibios_fixup_resources)(struct pci_dev *); - - /* Called for each PCI bus in the system when it's probed */ - void (*pcibios_fixup_bus)(struct pci_bus *); - - /* Called when pci_enable_device() is called. Returns 0 to - * allow assignment/enabling of the device. */ - int (*pcibios_enable_device_hook)(struct pci_dev *); - - /* Called to shutdown machine specific hardware not already controlled - * by other drivers. - */ - void (*machine_shutdown)(void); - -#ifdef CONFIG_KEXEC - /* Called to do the minimal shutdown needed to run a kexec'd kernel - * to run successfully. - * XXX Should we move this one out of kexec scope? - */ - void (*machine_crash_shutdown)(struct pt_regs *regs); - - /* Called to do what every setup is needed on image and the - * reboot code buffer. Returns 0 on success. - * Provide your own (maybe dummy) implementation if your platform - * claims to support kexec. - */ - int (*machine_kexec_prepare)(struct kimage *image); - - /* Called to handle any machine specific cleanup on image */ - void (*machine_kexec_cleanup)(struct kimage *image); - - /* Called to perform the _real_ kexec. - * Do NOT allocate memory or fail here. We are past the point of - * no return. - */ - void (*machine_kexec)(struct kimage *image); -#endif /* CONFIG_KEXEC */ - -#ifdef CONFIG_SUSPEND - /* These are called to disable and enable, respectively, IRQs when - * entering a suspend state. If NULL, then the generic versions - * will be called. The generic versions disable/enable the - * decrementer along with interrupts. - */ - void (*suspend_disable_irqs)(void); - void (*suspend_enable_irqs)(void); -#endif -}; - -extern void e500_idle(void); -extern void power4_idle(void); -extern void power4_cpu_offline_powersave(void); -extern void ppc6xx_idle(void); - -/* - * ppc_md contains a copy of the machine description structure for the - * current platform. machine_id contains the initial address where the - * description was found during boot. - */ -extern struct machdep_calls ppc_md; -extern struct machdep_calls *machine_id; - -#define __machine_desc __attribute__ ((__section__ (".machine.desc"))) - -#define define_machine(name) \ - extern struct machdep_calls mach_##name; \ - EXPORT_SYMBOL(mach_##name); \ - struct machdep_calls mach_##name __machine_desc = - -#define machine_is(name) \ - ({ \ - extern struct machdep_calls mach_##name \ - __attribute__((weak)); \ - machine_id == &mach_##name; \ - }) - -extern void probe_machine(void); - -extern char cmd_line[COMMAND_LINE_SIZE]; - -#ifdef CONFIG_PPC_PMAC -/* - * Power macintoshes have either a CUDA, PMU or SMU controlling - * system reset, power, NVRAM, RTC. - */ -typedef enum sys_ctrler_kind { - SYS_CTRLER_UNKNOWN = 0, - SYS_CTRLER_CUDA = 1, - SYS_CTRLER_PMU = 2, - SYS_CTRLER_SMU = 3, -} sys_ctrler_t; -extern sys_ctrler_t sys_ctrler; - -#endif /* CONFIG_PPC_PMAC */ - -extern void setup_pci_ptrs(void); - -#ifdef CONFIG_SMP -/* Poor default implementations */ -extern void __devinit smp_generic_give_timebase(void); -extern void __devinit smp_generic_take_timebase(void); -#endif /* CONFIG_SMP */ - - -/* Functions to produce codes on the leds. - * The SRC code should be unique for the message category and should - * be limited to the lower 24 bits (the upper 8 are set by these funcs), - * and (for boot & dump) should be sorted numerically in the order - * the events occur. - */ -/* Print a boot progress message. */ -void ppc64_boot_msg(unsigned int src, const char *msg); -/* Print a termination message (print only -- does not stop the kernel) */ -void ppc64_terminate_msg(unsigned int src, const char *msg); - -static inline void log_error(char *buf, unsigned int err_type, int fatal) -{ - if (ppc_md.log_error) - ppc_md.log_error(buf, err_type, fatal); -} - -#define __define_machine_initcall(mach,level,fn,id) \ - static int __init __machine_initcall_##mach##_##fn(void) { \ - if (machine_is(mach)) return fn(); \ - return 0; \ - } \ - __define_initcall(level,__machine_initcall_##mach##_##fn,id); - -#define machine_core_initcall(mach,fn) __define_machine_initcall(mach,"1",fn,1) -#define machine_core_initcall_sync(mach,fn) __define_machine_initcall(mach,"1s",fn,1s) -#define machine_postcore_initcall(mach,fn) __define_machine_initcall(mach,"2",fn,2) -#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s) -#define machine_arch_initcall(mach,fn) __define_machine_initcall(mach,"3",fn,3) -#define machine_arch_initcall_sync(mach,fn) __define_machine_initcall(mach,"3s",fn,3s) -#define machine_subsys_initcall(mach,fn) __define_machine_initcall(mach,"4",fn,4) -#define machine_subsys_initcall_sync(mach,fn) __define_machine_initcall(mach,"4s",fn,4s) -#define machine_fs_initcall(mach,fn) __define_machine_initcall(mach,"5",fn,5) -#define machine_fs_initcall_sync(mach,fn) __define_machine_initcall(mach,"5s",fn,5s) -#define machine_rootfs_initcall(mach,fn) __define_machine_initcall(mach,"rootfs",fn,rootfs) -#define machine_device_initcall(mach,fn) __define_machine_initcall(mach,"6",fn,6) -#define machine_device_initcall_sync(mach,fn) __define_machine_initcall(mach,"6s",fn,6s) -#define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7) -#define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s) - -void generic_suspend_disable_irqs(void); -void generic_suspend_enable_irqs(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h deleted file mode 100644 index 079c06eae446..000000000000 --- a/include/asm-powerpc/macio.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __MACIO_ASIC_H__ -#define __MACIO_ASIC_H__ -#ifdef __KERNEL__ - -#include - -extern struct bus_type macio_bus_type; - -/* MacIO device driver is defined later */ -struct macio_driver; -struct macio_chip; - -#define MACIO_DEV_COUNT_RESOURCES 8 -#define MACIO_DEV_COUNT_IRQS 8 - -/* - * the macio_bus structure is used to describe a "virtual" bus - * within a MacIO ASIC. It's typically provided by a macio_pci_asic - * PCI device, but could be provided differently as well (nubus - * machines using a fake OF tree). - * - * The pdev field can be NULL on non-PCI machines - */ -struct macio_bus -{ - struct macio_chip *chip; /* macio_chip (private use) */ - int index; /* macio chip index in system */ -#ifdef CONFIG_PCI - struct pci_dev *pdev; /* PCI device hosting this bus */ -#endif -}; - -/* - * the macio_dev structure is used to describe a device - * within an Apple MacIO ASIC. - */ -struct macio_dev -{ - struct macio_bus *bus; /* macio bus this device is on */ - struct macio_dev *media_bay; /* Device is part of a media bay */ - struct of_device ofdev; - int n_resources; - struct resource resource[MACIO_DEV_COUNT_RESOURCES]; - int n_interrupts; - struct resource interrupt[MACIO_DEV_COUNT_IRQS]; -}; -#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) -#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) - -extern struct macio_dev *macio_dev_get(struct macio_dev *dev); -extern void macio_dev_put(struct macio_dev *dev); - -/* - * Accessors to resources & interrupts and other device - * fields - */ - -static inline int macio_resource_count(struct macio_dev *dev) -{ - return dev->n_resources; -} - -static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].start; -} - -static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].end; -} - -static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) -{ - struct resource *res = &dev->resource[resource_no]; - if (res->start == 0 || res->end == 0 || res->end < res->start) - return 0; - return res->end - res->start + 1; -} - -extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); -extern void macio_release_resource(struct macio_dev *dev, int resource_no); -extern int macio_request_resources(struct macio_dev *dev, const char *name); -extern void macio_release_resources(struct macio_dev *dev); - -static inline int macio_irq_count(struct macio_dev *dev) -{ - return dev->n_interrupts; -} - -static inline int macio_irq(struct macio_dev *dev, int irq_no) -{ - return dev->interrupt[irq_no].start; -} - -static inline void macio_set_drvdata(struct macio_dev *dev, void *data) -{ - dev_set_drvdata(&dev->ofdev.dev, data); -} - -static inline void* macio_get_drvdata(struct macio_dev *dev) -{ - return dev_get_drvdata(&dev->ofdev.dev); -} - -static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) -{ - return mdev->ofdev.node; -} - -#ifdef CONFIG_PCI -static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) -{ - return mdev->bus->pdev; -} -#endif - -/* - * A driver for a mac-io chip based device - */ -struct macio_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); - - int (*suspend)(struct macio_dev* dev, pm_message_t state); - int (*resume)(struct macio_dev* dev); - int (*shutdown)(struct macio_dev* dev); - - struct device_driver driver; -}; -#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) - -extern int macio_register_driver(struct macio_driver *); -extern void macio_unregister_driver(struct macio_driver *); - -#endif /* __KERNEL__ */ -#endif /* __MACIO_ASIC_H__ */ diff --git a/include/asm-powerpc/mc146818rtc.h b/include/asm-powerpc/mc146818rtc.h deleted file mode 100644 index f2741c8b59a1..000000000000 --- a/include/asm-powerpc/mc146818rtc.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_POWERPC_MC146818RTC_H -#define _ASM_POWERPC_MC146818RTC_H - -/* - * Machine dependent access functions for RTC registers. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ - -#include - -#ifndef RTC_PORT -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MC146818RTC_H */ diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h deleted file mode 100644 index b2efb3325808..000000000000 --- a/include/asm-powerpc/mediabay.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * mediabay.h: definitions for using the media bay - * on PowerBook 3400 and similar computers. - * - * Copyright (C) 1997 Paul Mackerras. - */ -#ifndef _PPC_MEDIABAY_H -#define _PPC_MEDIABAY_H - -#ifdef __KERNEL__ - -#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ -#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ -#define MB_SOUND 2 /* sound device ? */ -#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ -#define MB_PCI 5 /* media bay contains a PCI device */ -#define MB_POWER 6 /* media bay contains a Power device (???) */ -#define MB_NO 7 /* media bay contains nothing */ - -/* Number of bays in the machine or 0 */ -extern int media_bay_count; - -#ifdef CONFIG_BLK_DEV_IDE_PMAC -#include - -int check_media_bay_by_base(unsigned long base, int what); -/* called by IDE PMAC host driver to register IDE controller for media bay */ -int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, - int irq, ide_hwif_t *hwif); - -int check_media_bay(struct device_node *which_bay, int what); - -#else - -static inline int check_media_bay(struct device_node *which_bay, int what) -{ - return -ENODEV; -} - -#endif - -#endif /* __KERNEL__ */ -#endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h deleted file mode 100644 index 9209f755763e..000000000000 --- a/include/asm-powerpc/mman.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _ASM_POWERPC_MMAN_H -#define _ASM_POWERPC_MMAN_H - -#include - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define PROT_SAO 0x10 /* Strong Access Ordering */ - -#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ -#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ -#define MAP_LOCKED 0x80 - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ - -#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ -#define MCL_FUTURE 0x4000 /* lock all additions to address space */ - -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#ifdef __KERNEL__ -#ifdef CONFIG_PPC64 - -#include -#include - -/* - * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() - * here. How important is the optimization? - */ -static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot) -{ - return (prot & PROT_SAO) ? VM_SAO : 0; -} -#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot) - -static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) -{ - return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0; -} -#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) - -static inline int arch_validate_prot(unsigned long prot) -{ - if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) - return 0; - if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO)) - return 0; - return 1; -} -#define arch_validate_prot(prot) arch_validate_prot(prot) - -#endif /* CONFIG_PPC64 */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MMAN_H */ diff --git a/include/asm-powerpc/mmu-40x.h b/include/asm-powerpc/mmu-40x.h deleted file mode 100644 index 3d108676584c..000000000000 --- a/include/asm-powerpc/mmu-40x.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_40X_H_ -#define _ASM_POWERPC_MMU_40X_H_ - -/* - * PPC40x support - */ - -#define PPC40X_TLB_SIZE 64 - -/* - * TLB entries are defined by a "high" tag portion and a "low" data - * portion. On all architectures, the data portion is 32-bits. - * - * TLB entries are managed entirely under software control by reading, - * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx - * instructions. - */ - -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h deleted file mode 100644 index a825524c981a..000000000000 --- a/include/asm-powerpc/mmu-44x.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_44X_H_ -#define _ASM_POWERPC_MMU_44X_H_ -/* - * PPC440 support - */ - -#define PPC44x_MMUCR_TID 0x000000ff -#define PPC44x_MMUCR_STS 0x00010000 - -#define PPC44x_TLB_PAGEID 0 -#define PPC44x_TLB_XLAT 1 -#define PPC44x_TLB_ATTRIB 2 - -/* Page identification fields */ -#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ -#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ -#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ -#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ -#define PPC44x_TLB_4K 0x00000010 -#define PPC44x_TLB_16K 0x00000020 -#define PPC44x_TLB_64K 0x00000030 -#define PPC44x_TLB_256K 0x00000040 -#define PPC44x_TLB_1M 0x00000050 -#define PPC44x_TLB_16M 0x00000070 -#define PPC44x_TLB_256M 0x00000090 - -/* Translation fields */ -#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ -#define PPC44x_TLB_ERPN_MASK 0x0000000f - -/* Storage attribute and access control fields */ -#define PPC44x_TLB_ATTR_MASK 0x0000ff80 -#define PPC44x_TLB_U0 0x00008000 /* User 0 */ -#define PPC44x_TLB_U1 0x00004000 /* User 1 */ -#define PPC44x_TLB_U2 0x00002000 /* User 2 */ -#define PPC44x_TLB_U3 0x00001000 /* User 3 */ -#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ -#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ -#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ -#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ -#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */ - -#define PPC44x_TLB_PERM_MASK 0x0000003f -#define PPC44x_TLB_UX 0x00000020 /* User execution */ -#define PPC44x_TLB_UW 0x00000010 /* User write */ -#define PPC44x_TLB_UR 0x00000008 /* User read */ -#define PPC44x_TLB_SX 0x00000004 /* Super execution */ -#define PPC44x_TLB_SW 0x00000002 /* Super write */ -#define PPC44x_TLB_SR 0x00000001 /* Super read */ - -/* Number of TLB entries */ -#define PPC44x_TLB_SIZE 64 - -#ifndef __ASSEMBLY__ - -extern unsigned int tlb_44x_hwater; - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#ifndef CONFIG_PPC_EARLY_DEBUG_44x -#define PPC44x_EARLY_TLBS 1 -#else -#define PPC44x_EARLY_TLBS 2 -#define PPC44x_EARLY_DEBUG_VIRTADDR (ASM_CONST(0xf0000000) \ - | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff)) -#endif - -/* Size of the TLBs used for pinning in lowmem */ -#define PPC_PIN_SIZE (1 << 28) /* 256M */ - -#endif /* _ASM_POWERPC_MMU_44X_H_ */ diff --git a/include/asm-powerpc/mmu-8xx.h b/include/asm-powerpc/mmu-8xx.h deleted file mode 100644 index 9db877eb88db..000000000000 --- a/include/asm-powerpc/mmu-8xx.h +++ /dev/null @@ -1,145 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_8XX_H_ -#define _ASM_POWERPC_MMU_8XX_H_ -/* - * PPC8xx support - */ - -/* Control/status registers for the MPC8xx. - * A write operation to these registers causes serialized access. - * During software tablewalk, the registers used perform mask/shift-add - * operations when written/read. A TLB entry is created when the Mx_RPN - * is written, and the contents of several registers are used to - * create the entry. - */ -#define SPRN_MI_CTR 784 /* Instruction TLB control register */ -#define MI_GPM 0x80000000 /* Set domain manager mode */ -#define MI_PPM 0x40000000 /* Set subpage protection */ -#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MI_RESETVAL 0x00000000 /* Value of register at reset */ - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MI_AP 786 -#define MI_Ks 0x80000000 /* Should not be set */ -#define MI_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MI_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MI_EPN 787 -#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MI_EVALID 0x00000200 /* Entry is valid */ -#define MI_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the instruction TLB, it contains bits that get loaded into the - * TLB entry when the MI_RPN is written. - */ -#define SPRN_MI_TWC 789 -#define MI_APG 0x000001e0 /* Access protection group (0) */ -#define MI_GUARDED 0x00000010 /* Guarded storage */ -#define MI_PSMASK 0x0000000c /* Mask of page size bits */ -#define MI_PS8MEG 0x0000000c /* 8M page size */ -#define MI_PS512K 0x00000004 /* 512K page size */ -#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MI_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the instruction TLB, using - * additional information from the MI_EPN, and MI_TWC registers. - */ -#define SPRN_MI_RPN 790 - -/* Define an RPN value for mapping kernel memory to large virtual - * pages for boot initialization. This has real page number of 0, - * large page size, shared page, cache enabled, and valid. - * Also mark all subpages valid and write access. - */ -#define MI_BOOTINIT 0x000001fd - -#define SPRN_MD_CTR 792 /* Data TLB control register */ -#define MD_GPM 0x80000000 /* Set domain manager mode */ -#define MD_PPM 0x40000000 /* Set subpage protection */ -#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ -#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ -#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MD_RESETVAL 0x04000000 /* Value of register at reset */ - -#define SPRN_M_CASID 793 /* Address space ID (context) to match */ -#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ - - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MD_AP 794 -#define MD_Ks 0x80000000 /* Should not be set */ -#define MD_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MD_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MD_EPN 795 -#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MD_EVALID 0x00000200 /* Entry is valid */ -#define MD_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* The pointer to the base address of the first level page table. - * During a software tablewalk, reading this register provides the address - * of the entry associated with MD_EPN. - */ -#define SPRN_M_TWB 796 -#define M_L1TB 0xfffff000 /* Level 1 table base address */ -#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the data TLB, it contains bits that get loaded into the TLB entry - * when the MD_RPN is written. It is also provides the hardware assist - * for finding the PTE address during software tablewalk. - */ -#define SPRN_MD_TWC 797 -#define MD_L2TB 0xfffff000 /* Level 2 table base address */ -#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ -#define MD_APG 0x000001e0 /* Access protection group (0) */ -#define MD_GUARDED 0x00000010 /* Guarded storage */ -#define MD_PSMASK 0x0000000c /* Mask of page size bits */ -#define MD_PS8MEG 0x0000000c /* 8M page size */ -#define MD_PS512K 0x00000004 /* 512K page size */ -#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MD_WT 0x00000002 /* Use writethrough page attribute */ -#define MD_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the data TLB, using - * additional information from the MD_EPN, and MD_TWC registers. - */ -#define SPRN_MD_RPN 798 - -/* This is a temporary storage register that could be used to save - * a processor working register during a tablewalk. - */ -#define SPRN_M_TW 799 - -#ifndef __ASSEMBLY__ -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/include/asm-powerpc/mmu-fsl-booke.h deleted file mode 100644 index 925d93cf64d8..000000000000 --- a/include/asm-powerpc/mmu-fsl-booke.h +++ /dev/null @@ -1,82 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_ -#define _ASM_POWERPC_MMU_FSL_BOOKE_H_ -/* - * Freescale Book-E MMU support - */ - -/* Book-E defined page sizes */ -#define BOOKE_PAGESZ_1K 0 -#define BOOKE_PAGESZ_4K 1 -#define BOOKE_PAGESZ_16K 2 -#define BOOKE_PAGESZ_64K 3 -#define BOOKE_PAGESZ_256K 4 -#define BOOKE_PAGESZ_1M 5 -#define BOOKE_PAGESZ_4M 6 -#define BOOKE_PAGESZ_16M 7 -#define BOOKE_PAGESZ_64M 8 -#define BOOKE_PAGESZ_256M 9 -#define BOOKE_PAGESZ_1GB 10 -#define BOOKE_PAGESZ_4GB 11 -#define BOOKE_PAGESZ_16GB 12 -#define BOOKE_PAGESZ_64GB 13 -#define BOOKE_PAGESZ_256GB 14 -#define BOOKE_PAGESZ_1TB 15 - -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) -#define MAS0_NV(x) ((x) & 0x00000FFF) - -#define MAS1_VALID 0x80000000 -#define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) - -#define MAS2_EPN 0xFFFFF000 -#define MAS2_X0 0x00000040 -#define MAS2_X1 0x00000020 -#define MAS2_W 0x00000010 -#define MAS2_I 0x00000008 -#define MAS2_M 0x00000004 -#define MAS2_G 0x00000002 -#define MAS2_E 0x00000001 - -#define MAS3_RPN 0xFFFFF000 -#define MAS3_U0 0x00000200 -#define MAS3_U1 0x00000100 -#define MAS3_U2 0x00000080 -#define MAS3_U3 0x00000040 -#define MAS3_UX 0x00000020 -#define MAS3_SX 0x00000010 -#define MAS3_UW 0x00000008 -#define MAS3_SW 0x00000004 -#define MAS3_UR 0x00000002 -#define MAS3_SR 0x00000001 - -#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_TIDDSEL 0x000F0000 -#define MAS4_TSIZED(x) MAS1_TSIZE(x) -#define MAS4_X0D 0x00000040 -#define MAS4_X1D 0x00000020 -#define MAS4_WD 0x00000010 -#define MAS4_ID 0x00000008 -#define MAS4_MD 0x00000004 -#define MAS4_GD 0x00000002 -#define MAS4_ED 0x00000001 - -#define MAS6_SPID0 0x3FFF0000 -#define MAS6_SPID1 0x00007FFE -#define MAS6_SAS 0x00000001 -#define MAS6_SPID MAS6_SPID0 - -#define MAS7_RPN 0xFFFFFFFF - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */ diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h deleted file mode 100644 index 16b1a1e77e64..000000000000 --- a/include/asm-powerpc/mmu-hash32.h +++ /dev/null @@ -1,83 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_HASH32_H_ -#define _ASM_POWERPC_MMU_HASH32_H_ -/* - * 32-bit hash table MMU support - */ - -/* - * BATs - */ - -/* Block size masks */ -#define BL_128K 0x000 -#define BL_256K 0x001 -#define BL_512K 0x003 -#define BL_1M 0x007 -#define BL_2M 0x00F -#define BL_4M 0x01F -#define BL_8M 0x03F -#define BL_16M 0x07F -#define BL_32M 0x0FF -#define BL_64M 0x1FF -#define BL_128M 0x3FF -#define BL_256M 0x7FF - -/* BAT Access Protection */ -#define BPP_XX 0x00 /* No access */ -#define BPP_RX 0x01 /* Read only */ -#define BPP_RW 0x02 /* Read/write */ - -#ifndef __ASSEMBLY__ -/* Contort a phys_addr_t into the right format/bits for a BAT */ -#ifdef CONFIG_PHYS_64BIT -#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ - ((x & 0x0000000e00000000ULL) >> 24) | \ - ((x & 0x0000000100000000ULL) >> 30))) -#else -#define BAT_PHYS_ADDR(x) (x) -#endif - -struct ppc_bat { - u32 batu; - u32 batl; -}; -#endif /* !__ASSEMBLY__ */ - -/* - * Hash table - */ - -/* Values for PP (assumes Ks=0, Kp=1) */ -#define PP_RWXX 0 /* Supervisor read/write, User none */ -#define PP_RWRX 1 /* Supervisor read/write, User read */ -#define PP_RWRW 2 /* Supervisor read/write, User read/write */ -#define PP_RXRX 3 /* Supervisor read, User read */ - -#ifndef __ASSEMBLY__ - -/* Hardware Page Table Entry */ -struct hash_pte { - unsigned long v:1; /* Entry is valid */ - unsigned long vsid:24; /* Virtual segment identifier */ - unsigned long h:1; /* Hash algorithm indicator */ - unsigned long api:6; /* Abbreviated page index */ - unsigned long rpn:20; /* Real (physical) page number */ - unsigned long :3; /* Unused */ - unsigned long r:1; /* Referenced */ - unsigned long c:1; /* Changed */ - unsigned long w:1; /* Write-thru cache mode */ - unsigned long i:1; /* Cache inhibited */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page protection */ -}; - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_HASH32_H_ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h deleted file mode 100644 index 19c7a9403490..000000000000 --- a/include/asm-powerpc/mmu-hash64.h +++ /dev/null @@ -1,478 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_HASH64_H_ -#define _ASM_POWERPC_MMU_HASH64_H_ -/* - * PowerPC64 memory management structures - * - * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com> - * PPC64 rework. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -/* - * Segment table - */ - -#define STE_ESID_V 0x80 -#define STE_ESID_KS 0x20 -#define STE_ESID_KP 0x10 -#define STE_ESID_N 0x08 - -#define STE_VSID_SHIFT 12 - -/* Location of cpu0's segment table */ -#define STAB0_PAGE 0x6 -#define STAB0_OFFSET (STAB0_PAGE << 12) -#define STAB0_PHYS_ADDR (STAB0_OFFSET + PHYSICAL_START) - -#ifndef __ASSEMBLY__ -extern char initial_stab[]; -#endif /* ! __ASSEMBLY */ - -/* - * SLB - */ - -#define SLB_NUM_BOLTED 3 -#define SLB_CACHE_ENTRIES 8 - -/* Bits in the SLB ESID word */ -#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ - -/* Bits in the SLB VSID word */ -#define SLB_VSID_SHIFT 12 -#define SLB_VSID_SHIFT_1T 24 -#define SLB_VSID_SSIZE_SHIFT 62 -#define SLB_VSID_B ASM_CONST(0xc000000000000000) -#define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) -#define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) -#define SLB_VSID_KS ASM_CONST(0x0000000000000800) -#define SLB_VSID_KP ASM_CONST(0x0000000000000400) -#define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ -#define SLB_VSID_L ASM_CONST(0x0000000000000100) -#define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ -#define SLB_VSID_LP ASM_CONST(0x0000000000000030) -#define SLB_VSID_LP_00 ASM_CONST(0x0000000000000000) -#define SLB_VSID_LP_01 ASM_CONST(0x0000000000000010) -#define SLB_VSID_LP_10 ASM_CONST(0x0000000000000020) -#define SLB_VSID_LP_11 ASM_CONST(0x0000000000000030) -#define SLB_VSID_LLP (SLB_VSID_L|SLB_VSID_LP) - -#define SLB_VSID_KERNEL (SLB_VSID_KP) -#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) - -#define SLBIE_C (0x08000000) -#define SLBIE_SSIZE_SHIFT 25 - -/* - * Hash table - */ - -#define HPTES_PER_GROUP 8 - -#define HPTE_V_SSIZE_SHIFT 62 -#define HPTE_V_AVPN_SHIFT 7 -#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) -#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) -#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80UL)) -#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) -#define HPTE_V_LOCK ASM_CONST(0x0000000000000008) -#define HPTE_V_LARGE ASM_CONST(0x0000000000000004) -#define HPTE_V_SECONDARY ASM_CONST(0x0000000000000002) -#define HPTE_V_VALID ASM_CONST(0x0000000000000001) - -#define HPTE_R_PP0 ASM_CONST(0x8000000000000000) -#define HPTE_R_TS ASM_CONST(0x4000000000000000) -#define HPTE_R_RPN_SHIFT 12 -#define HPTE_R_RPN ASM_CONST(0x3ffffffffffff000) -#define HPTE_R_FLAGS ASM_CONST(0x00000000000003ff) -#define HPTE_R_PP ASM_CONST(0x0000000000000003) -#define HPTE_R_N ASM_CONST(0x0000000000000004) -#define HPTE_R_C ASM_CONST(0x0000000000000080) -#define HPTE_R_R ASM_CONST(0x0000000000000100) - -#define HPTE_V_1TB_SEG ASM_CONST(0x4000000000000000) -#define HPTE_V_VRMA_MASK ASM_CONST(0x4001ffffff000000) - -/* Values for PP (assumes Ks=0, Kp=1) */ -/* pp0 will always be 0 for linux */ -#define PP_RWXX 0 /* Supervisor read/write, User none */ -#define PP_RWRX 1 /* Supervisor read/write, User read */ -#define PP_RWRW 2 /* Supervisor read/write, User read/write */ -#define PP_RXRX 3 /* Supervisor read, User read */ - -#ifndef __ASSEMBLY__ - -struct hash_pte { - unsigned long v; - unsigned long r; -}; - -extern struct hash_pte *htab_address; -extern unsigned long htab_size_bytes; -extern unsigned long htab_hash_mask; - -/* - * Page size definition - * - * shift : is the "PAGE_SHIFT" value for that page size - * sllp : is a bit mask with the value of SLB L || LP to be or'ed - * directly to a slbmte "vsid" value - * penc : is the HPTE encoding mask for the "LP" field: - * - */ -struct mmu_psize_def -{ - unsigned int shift; /* number of bits */ - unsigned int penc; /* HPTE encoding */ - unsigned int tlbiel; /* tlbiel supported for that page size */ - unsigned long avpnm; /* bits to mask out in AVPN in the HPTE */ - unsigned long sllp; /* SLB L||LP (exact mask to use in slbmte) */ -}; - -#endif /* __ASSEMBLY__ */ - -/* - * The kernel use the constants below to index in the page sizes array. - * The use of fixed constants for this purpose is better for performances - * of the low level hash refill handlers. - * - * A non supported page size has a "shift" field set to 0 - * - * Any new page size being implemented can get a new entry in here. Whether - * the kernel will use it or not is a different matter though. The actual page - * size used by hugetlbfs is not defined here and may be made variable - */ - -#define MMU_PAGE_4K 0 /* 4K */ -#define MMU_PAGE_64K 1 /* 64K */ -#define MMU_PAGE_64K_AP 2 /* 64K Admixed (in a 4K segment) */ -#define MMU_PAGE_1M 3 /* 1M */ -#define MMU_PAGE_16M 4 /* 16M */ -#define MMU_PAGE_16G 5 /* 16G */ -#define MMU_PAGE_COUNT 6 - -/* - * Segment sizes. - * These are the values used by hardware in the B field of - * SLB entries and the first dword of MMU hashtable entries. - * The B field is 2 bits; the values 2 and 3 are unused and reserved. - */ -#define MMU_SEGSIZE_256M 0 -#define MMU_SEGSIZE_1T 1 - - -#ifndef __ASSEMBLY__ - -/* - * The current system page and segment sizes - */ -extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; -extern int mmu_linear_psize; -extern int mmu_virtual_psize; -extern int mmu_vmalloc_psize; -extern int mmu_vmemmap_psize; -extern int mmu_io_psize; -extern int mmu_kernel_ssize; -extern int mmu_highuser_ssize; -extern u16 mmu_slb_size; -extern unsigned long tce_alloc_start, tce_alloc_end; - -/* - * If the processor supports 64k normal pages but not 64k cache - * inhibited pages, we have to be prepared to switch processes - * to use 4k pages when they create cache-inhibited mappings. - * If this is the case, mmu_ci_restrictions will be set to 1. - */ -extern int mmu_ci_restrictions; - -#ifdef CONFIG_HUGETLB_PAGE -/* - * The page size indexes of the huge pages for use by hugetlbfs - */ -extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; - -#endif /* CONFIG_HUGETLB_PAGE */ - -/* - * This function sets the AVPN and L fields of the HPTE appropriately - * for the page size - */ -static inline unsigned long hpte_encode_v(unsigned long va, int psize, - int ssize) -{ - unsigned long v; - v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm); - v <<= HPTE_V_AVPN_SHIFT; - if (psize != MMU_PAGE_4K) - v |= HPTE_V_LARGE; - v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; - return v; -} - -/* - * This function sets the ARPN, and LP fields of the HPTE appropriately - * for the page size. We assume the pa is already "clean" that is properly - * aligned for the requested page size - */ -static inline unsigned long hpte_encode_r(unsigned long pa, int psize) -{ - unsigned long r; - - /* A 4K page needs no special encoding */ - if (psize == MMU_PAGE_4K) - return pa & HPTE_R_RPN; - else { - unsigned int penc = mmu_psize_defs[psize].penc; - unsigned int shift = mmu_psize_defs[psize].shift; - return (pa & ~((1ul << shift) - 1)) | (penc << 12); - } - return r; -} - -/* - * Build a VA given VSID, EA and segment size - */ -static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid, - int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return (vsid << 28) | (ea & 0xfffffffUL); - return (vsid << 40) | (ea & 0xffffffffffUL); -} - -/* - * This hashes a virtual address - */ - -static inline unsigned long hpt_hash(unsigned long va, unsigned int shift, - int ssize) -{ - unsigned long hash, vsid; - - if (ssize == MMU_SEGSIZE_256M) { - hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift); - } else { - vsid = va >> 40; - hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift); - } - return hash & 0x7fffffffffUL; -} - -extern int __hash_page_4K(unsigned long ea, unsigned long access, - unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local, int ssize, int subpage_prot); -extern int __hash_page_64K(unsigned long ea, unsigned long access, - unsigned long vsid, pte_t *ptep, unsigned long trap, - unsigned int local, int ssize); -struct mm_struct; -extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); -extern int hash_huge_page(struct mm_struct *mm, unsigned long access, - unsigned long ea, unsigned long vsid, int local, - unsigned long trap); - -extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, - unsigned long pstart, unsigned long mode, - int psize, int ssize); -extern void set_huge_psize(int psize); -extern void add_gpage(unsigned long addr, unsigned long page_size, - unsigned long number_of_pages); -extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); - -extern void htab_initialize(void); -extern void htab_initialize_secondary(void); -extern void hpte_init_native(void); -extern void hpte_init_lpar(void); -extern void hpte_init_iSeries(void); -extern void hpte_init_beat(void); -extern void hpte_init_beat_v3(void); - -extern void stabs_alloc(void); -extern void slb_initialize(void); -extern void slb_flush_and_rebolt(void); -extern void stab_initialize(unsigned long stab); - -extern void slb_vmalloc_update(void); -#endif /* __ASSEMBLY__ */ - -/* - * VSID allocation - * - * We first generate a 36-bit "proto-VSID". For kernel addresses this - * is equal to the ESID, for user addresses it is: - * (context << 15) | (esid & 0x7fff) - * - * The two forms are distinguishable because the top bit is 0 for user - * addresses, whereas the top two bits are 1 for kernel addresses. - * Proto-VSIDs with the top two bits equal to 0b10 are reserved for - * now. - * - * The proto-VSIDs are then scrambled into real VSIDs with the - * multiplicative hash: - * - * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS - * where VSID_MULTIPLIER = 268435399 = 0xFFFFFC7 - * VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF - * - * This scramble is only well defined for proto-VSIDs below - * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are - * reserved. VSID_MULTIPLIER is prime, so in particular it is - * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. - * Because the modulus is 2^n-1 we can compute it efficiently without - * a divide or extra multiply (see below). - * - * This scheme has several advantages over older methods: - * - * - We have VSIDs allocated for every kernel address - * (i.e. everything above 0xC000000000000000), except the very top - * segment, which simplifies several things. - * - * - We allow for 15 significant bits of ESID and 20 bits of - * context for user addresses. i.e. 8T (43 bits) of address space for - * up to 1M contexts (although the page table structure and context - * allocation will need changes to take advantage of this). - * - * - The scramble function gives robust scattering in the hash - * table (at least based on some initial results). The previous - * method was more susceptible to pathological cases giving excessive - * hash collisions. - */ -/* - * WARNING - If you change these you must make sure the asm - * implementations in slb_allocate (slb_low.S), do_stab_bolted - * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly. - * - * You'll also need to change the precomputed VSID values in head.S - * which are used by the iSeries firmware. - */ - -#define VSID_MULTIPLIER_256M ASM_CONST(200730139) /* 28-bit prime */ -#define VSID_BITS_256M 36 -#define VSID_MODULUS_256M ((1UL<= \ - * 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \ - * the bit clear, r3 already has the answer we want, if it \ - * doesn't, the answer is the low 36 bits of r3+1. So in all \ - * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\ - addi rx,rt,1; \ - srdi rx,rx,VSID_BITS_##size; /* extract 2^VSID_BITS bit */ \ - add rt,rt,rx - - -#ifndef __ASSEMBLY__ - -typedef unsigned long mm_context_id_t; - -typedef struct { - mm_context_id_t id; - u16 user_psize; /* page size index */ - -#ifdef CONFIG_PPC_MM_SLICES - u64 low_slices_psize; /* SLB page size encodings */ - u64 high_slices_psize; /* 4 bits per slice for now */ -#else - u16 sllp; /* SLB page size encoding */ -#endif - unsigned long vdso_base; -} mm_context_t; - - -#if 0 -/* - * The code below is equivalent to this function for arguments - * < 2^VSID_BITS, which is all this should ever be called - * with. However gcc is not clever enough to compute the - * modulus (2^n-1) without a second multiply. - */ -#define vsid_scrample(protovsid, size) \ - ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) - -#else /* 1 */ -#define vsid_scramble(protovsid, size) \ - ({ \ - unsigned long x; \ - x = (protovsid) * VSID_MULTIPLIER_##size; \ - x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ - (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ - }) -#endif /* 1 */ - -/* This is only valid for addresses >= KERNELBASE */ -static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return vsid_scramble(ea >> SID_SHIFT, 256M); - return vsid_scramble(ea >> SID_SHIFT_1T, 1T); -} - -/* Returns the segment size indicator for a user address */ -static inline int user_segment_size(unsigned long addr) -{ - /* Use 1T segments if possible for addresses >= 1T */ - if (addr >= (1UL << SID_SHIFT_1T)) - return mmu_highuser_ssize; - return MMU_SEGSIZE_256M; -} - -/* This is only valid for user addresses (which are below 2^44) */ -static inline unsigned long get_vsid(unsigned long context, unsigned long ea, - int ssize) -{ - if (ssize == MMU_SEGSIZE_256M) - return vsid_scramble((context << USER_ESID_BITS) - | (ea >> SID_SHIFT), 256M); - return vsid_scramble((context << USER_ESID_BITS_1T) - | (ea >> SID_SHIFT_1T), 1T); -} - -/* - * This is only used on legacy iSeries in lparmap.c, - * hence the 256MB segment assumption. - */ -#define VSID_SCRAMBLE(pvsid) (((pvsid) * VSID_MULTIPLIER_256M) % \ - VSID_MODULUS_256M) -#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea)) - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_MMU_HASH64_H_ */ diff --git a/include/asm-powerpc/mmu.h b/include/asm-powerpc/mmu.h deleted file mode 100644 index 4c0e1b4f975c..000000000000 --- a/include/asm-powerpc/mmu.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_POWERPC_MMU_H_ -#define _ASM_POWERPC_MMU_H_ -#ifdef __KERNEL__ - -#ifdef CONFIG_PPC64 -/* 64-bit classic hash table MMU */ -# include -#elif defined(CONFIG_PPC_STD_MMU) -/* 32-bit classic hash table MMU */ -# include -#elif defined(CONFIG_40x) -/* 40x-style software loaded TLB */ -# include -#elif defined(CONFIG_44x) -/* 44x-style software loaded TLB */ -# include -#elif defined(CONFIG_FSL_BOOKE) -/* Freescale Book-E software loaded TLB */ -# include -#elif defined (CONFIG_PPC_8xx) -/* Motorola/Freescale 8xx software loaded TLB */ -# include -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h deleted file mode 100644 index 9102b8bf0ead..000000000000 --- a/include/asm-powerpc/mmu_context.h +++ /dev/null @@ -1,280 +0,0 @@ -#ifndef __ASM_POWERPC_MMU_CONTEXT_H -#define __ASM_POWERPC_MMU_CONTEXT_H -#ifdef __KERNEL__ - -#include -#include -#include - -#ifndef CONFIG_PPC64 -#include -#include - -/* - * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs - * (virtual segment identifiers) for each context. Although the - * hardware supports 24-bit VSIDs, and thus >1 million contexts, - * we only use 32,768 of them. That is ample, since there can be - * at most around 30,000 tasks in the system anyway, and it means - * that we can use a bitmap to indicate which contexts are in use. - * Using a bitmap means that we entirely avoid all of the problems - * that we used to have when the context number overflowed, - * particularly on SMP systems. - * -- paulus. - */ - -/* - * This function defines the mapping from contexts to VSIDs (virtual - * segment IDs). We use a skew on both the context and the high 4 bits - * of the 32-bit virtual address (the "effective segment ID") in order - * to spread out the entries in the MMU hash table. Note, if this - * function is changed then arch/ppc/mm/hashtable.S will have to be - * changed to correspond. - */ -#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \ - & 0xffffff) - -/* - The MPC8xx has only 16 contexts. We rotate through them on each - task switch. A better way would be to keep track of tasks that - own contexts, and implement an LRU usage. That way very active - tasks don't always have to pay the TLB reload overhead. The - kernel pages are mapped shared, so the kernel can run on behalf - of any task that makes a kernel entry. Shared does not mean they - are not protected, just that the ASID comparison is not performed. - -- Dan - - The IBM4xx has 256 contexts, so we can just rotate through these - as a way of "switching" contexts. If the TID of the TLB is zero, - the PID/TID comparison is disabled, so we can use a TID of zero - to represent all kernel pages as shared among all contexts. - -- Dan - */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifdef CONFIG_8xx -#define NO_CONTEXT 16 -#define LAST_CONTEXT 15 -#define FIRST_CONTEXT 0 - -#elif defined(CONFIG_4xx) -#define NO_CONTEXT 256 -#define LAST_CONTEXT 255 -#define FIRST_CONTEXT 1 - -#elif defined(CONFIG_E200) || defined(CONFIG_E500) -#define NO_CONTEXT 256 -#define LAST_CONTEXT 255 -#define FIRST_CONTEXT 1 - -#else - -/* PPC 6xx, 7xx CPUs */ -#define NO_CONTEXT ((unsigned long) -1) -#define LAST_CONTEXT 32767 -#define FIRST_CONTEXT 1 -#endif - -/* - * Set the current MMU context. - * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by - * loading up the segment registers for the user part of the address space. - * - * Since the PGD is immediately available, it is much faster to simply - * pass this along as a second parameter, which is required for 8xx and - * can be used for debugging on all processors (if you happen to have - * an Abatron). - */ -extern void set_context(unsigned long contextid, pgd_t *pgd); - -/* - * Bitmap of contexts in use. - * The size of this bitmap is LAST_CONTEXT + 1 bits. - */ -extern unsigned long context_map[]; - -/* - * This caches the next context number that we expect to be free. - * Its use is an optimization only, we can't rely on this context - * number to be free, but it usually will be. - */ -extern unsigned long next_mmu_context; - -/* - * If we don't have sufficient contexts to give one to every task - * that could be in the system, we need to be able to steal contexts. - * These variables support that. - */ -#if LAST_CONTEXT < 30000 -#define FEW_CONTEXTS 1 -extern atomic_t nr_free_contexts; -extern struct mm_struct *context_mm[LAST_CONTEXT+1]; -extern void steal_context(void); -#endif - -/* - * Get a new mmu context for the address space described by `mm'. - */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - unsigned long ctx; - - if (mm->context.id != NO_CONTEXT) - return; -#ifdef FEW_CONTEXTS - while (atomic_dec_if_positive(&nr_free_contexts) < 0) - steal_context(); -#endif - ctx = next_mmu_context; - while (test_and_set_bit(ctx, context_map)) { - ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); - if (ctx > LAST_CONTEXT) - ctx = 0; - } - next_mmu_context = (ctx + 1) & LAST_CONTEXT; - mm->context.id = ctx; -#ifdef FEW_CONTEXTS - context_mm[ctx] = mm; -#endif -} - -/* - * Set up the context for a new address space. - */ -static inline int init_new_context(struct task_struct *t, struct mm_struct *mm) -{ - mm->context.id = NO_CONTEXT; - mm->context.vdso_base = 0; - return 0; -} - -/* - * We're finished using the context for an address space. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - preempt_disable(); - if (mm->context.id != NO_CONTEXT) { - clear_bit(mm->context.id, context_map); - mm->context.id = NO_CONTEXT; -#ifdef FEW_CONTEXTS - atomic_inc(&nr_free_contexts); -#endif - } - preempt_enable(); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - asm volatile ("dssall;\n" -#ifndef CONFIG_POWER4 - "sync;\n" /* G4 needs a sync here, G5 apparently not */ -#endif - : : ); -#endif /* CONFIG_ALTIVEC */ - - tsk->thread.pgdir = next->pgd; - - /* No need to flush userspace segments if the mm doesnt change */ - if (prev == next) - return; - - /* Setup new userspace context */ - get_mmu_context(next); - set_context(next->context.id, next->pgd); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current) - -extern void mmu_context_init(void); - - -#else - -#include -#include -#include - -/* - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, - struct task_struct *tsk) -{ -} - -/* - * The proto-VSID space has 2^35 - 1 segments available for user mappings. - * Each segment contains 2^28 bytes. Each context maps 2^44 bytes, - * so we can support 2^19-1 contexts (19 == 35 + 28 - 44). - */ -#define NO_CONTEXT 0 -#define MAX_CONTEXT ((1UL << 19) - 1) - -extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); -extern void destroy_context(struct mm_struct *mm); - -extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm); -extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); - -/* - * switch_mm is the entry point called from the architecture independent - * code in kernel/sched.c - */ -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask)) - cpu_set(smp_processor_id(), next->cpu_vm_mask); - - /* No need to flush userspace segments if the mm doesnt change */ - if (prev == next) - return; - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - asm volatile ("dssall"); -#endif /* CONFIG_ALTIVEC */ - - if (cpu_has_feature(CPU_FTR_SLB)) - switch_slb(tsk, next); - else - switch_stab(tsk, next); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - unsigned long flags; - - local_irq_save(flags); - switch_mm(prev, next, current); - local_irq_restore(flags); -} - -#endif /* CONFIG_PPC64 */ -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/include/asm-powerpc/mmzone.h b/include/asm-powerpc/mmzone.h deleted file mode 100644 index 19f299b7e256..000000000000 --- a/include/asm-powerpc/mmzone.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 - * - * PowerPC64 port: - * Copyright (C) 2002 Anton Blanchard, IBM Corp. - */ -#ifndef _ASM_MMZONE_H_ -#define _ASM_MMZONE_H_ -#ifdef __KERNEL__ - - -/* - * generic non-linear memory support: - * - * 1) we will not split memory into more chunks than will fit into the - * flags field of the struct page - */ - -#ifdef CONFIG_NEED_MULTIPLE_NODES - -extern struct pglist_data *node_data[]; -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (node_data[nid]) - -/* - * Following are specific to this numa platform. - */ - -extern int numa_cpu_lookup_table[]; -extern cpumask_t numa_cpumask_lookup_table[]; -#ifdef CONFIG_MEMORY_HOTPLUG -extern unsigned long max_pfn; -#endif - -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) - -#endif /* CONFIG_NEED_MULTIPLE_NODES */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h deleted file mode 100644 index e5f14b13ccf0..000000000000 --- a/include/asm-powerpc/module.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _ASM_POWERPC_MODULE_H -#define _ASM_POWERPC_MODULE_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - - -#ifndef __powerpc64__ -/* - * Thanks to Paul M for explaining this. - * - * PPC can only do rel jumps += 32MB, and often the kernel and other - * modules are furthur away than this. So, we jump to a table of - * trampolines attached to the module (the Procedure Linkage Table) - * whenever that happens. - */ - -struct ppc_plt_entry { - /* 16 byte jump instruction sequence (4 instructions) */ - unsigned int jump[4]; -}; -#endif /* __powerpc64__ */ - - -struct mod_arch_specific { -#ifdef __powerpc64__ - unsigned int stubs_section; /* Index of stubs section in module */ - unsigned int toc_section; /* What section is the TOC? */ -#else - /* Indices of PLT sections within module. */ - unsigned int core_plt_section; - unsigned int init_plt_section; -#endif - - /* List of BUG addresses, source line numbers and filenames */ - struct list_head bug_list; - struct bug_entry *bug_table; - unsigned int num_bugs; -}; - -/* - * Select ELF headers. - * Make empty section for module_frob_arch_sections to expand. - */ - -#ifdef __powerpc64__ -# define Elf_Shdr Elf64_Shdr -# define Elf_Sym Elf64_Sym -# define Elf_Ehdr Elf64_Ehdr -# ifdef MODULE - asm(".section .stubs,\"ax\",@nobits; .align 3; .previous"); -# endif -#else -# define Elf_Shdr Elf32_Shdr -# define Elf_Sym Elf32_Sym -# define Elf_Ehdr Elf32_Ehdr -# ifdef MODULE - asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); - asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); -# endif /* MODULE */ -#endif - - -struct exception_table_entry; -void sort_ex_table(struct exception_table_entry *start, - struct exception_table_entry *finish); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MODULE_H */ diff --git a/include/asm-powerpc/mpc512x.h b/include/asm-powerpc/mpc512x.h deleted file mode 100644 index c48a1658eeac..000000000000 --- a/include/asm-powerpc/mpc512x.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: John Rigby, , Friday Apr 13 2007 - * - * Description: - * MPC5121 Prototypes and definitions - * - * This is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_POWERPC_MPC512x_H__ -#define __ASM_POWERPC_MPC512x_H__ - -extern unsigned long mpc512x_find_ips_freq(struct device_node *node); - -#endif /* __ASM_POWERPC_MPC512x_H__ */ - diff --git a/include/asm-powerpc/mpc52xx.h b/include/asm-powerpc/mpc52xx.h deleted file mode 100644 index 81ef10b6b672..000000000000 --- a/include/asm-powerpc/mpc52xx.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips - * May need to be cleaned as the port goes on ... - * - * Copyright (C) 2004-2005 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_POWERPC_MPC52xx_H__ -#define __ASM_POWERPC_MPC52xx_H__ - -#ifndef __ASSEMBLY__ -#include -#include -#endif /* __ASSEMBLY__ */ - -#include - -/* Variants of the 5200(B) */ -#define MPC5200_SVR 0x80110010 -#define MPC5200_SVR_MASK 0xfffffff0 -#define MPC5200B_SVR 0x80110020 -#define MPC5200B_SVR_MASK 0xfffffff0 - -/* ======================================================================== */ -/* Structures mapping of some unit register set */ -/* ======================================================================== */ - -#ifndef __ASSEMBLY__ - -/* Memory Mapping Control */ -struct mpc52xx_mmap_ctl { - u32 mbar; /* MMAP_CTRL + 0x00 */ - - u32 cs0_start; /* MMAP_CTRL + 0x04 */ - u32 cs0_stop; /* MMAP_CTRL + 0x08 */ - u32 cs1_start; /* MMAP_CTRL + 0x0c */ - u32 cs1_stop; /* MMAP_CTRL + 0x10 */ - u32 cs2_start; /* MMAP_CTRL + 0x14 */ - u32 cs2_stop; /* MMAP_CTRL + 0x18 */ - u32 cs3_start; /* MMAP_CTRL + 0x1c */ - u32 cs3_stop; /* MMAP_CTRL + 0x20 */ - u32 cs4_start; /* MMAP_CTRL + 0x24 */ - u32 cs4_stop; /* MMAP_CTRL + 0x28 */ - u32 cs5_start; /* MMAP_CTRL + 0x2c */ - u32 cs5_stop; /* MMAP_CTRL + 0x30 */ - - u32 sdram0; /* MMAP_CTRL + 0x34 */ - u32 sdram1; /* MMAP_CTRL + 0X38 */ - - u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ - - u32 boot_start; /* MMAP_CTRL + 0x4c */ - u32 boot_stop; /* MMAP_CTRL + 0x50 */ - - u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ - - u32 cs6_start; /* MMAP_CTRL + 0x58 */ - u32 cs6_stop; /* MMAP_CTRL + 0x5c */ - u32 cs7_start; /* MMAP_CTRL + 0x60 */ - u32 cs7_stop; /* MMAP_CTRL + 0x64 */ -}; - -/* SDRAM control */ -struct mpc52xx_sdram { - u32 mode; /* SDRAM + 0x00 */ - u32 ctrl; /* SDRAM + 0x04 */ - u32 config1; /* SDRAM + 0x08 */ - u32 config2; /* SDRAM + 0x0c */ -}; - -/* SDMA */ -struct mpc52xx_sdma { - u32 taskBar; /* SDMA + 0x00 */ - u32 currentPointer; /* SDMA + 0x04 */ - u32 endPointer; /* SDMA + 0x08 */ - u32 variablePointer; /* SDMA + 0x0c */ - - u8 IntVect1; /* SDMA + 0x10 */ - u8 IntVect2; /* SDMA + 0x11 */ - u16 PtdCntrl; /* SDMA + 0x12 */ - - u32 IntPend; /* SDMA + 0x14 */ - u32 IntMask; /* SDMA + 0x18 */ - - u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ - - u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ - - u32 cReqSelect; /* SDMA + 0x5c */ - u32 task_size0; /* SDMA + 0x60 */ - u32 task_size1; /* SDMA + 0x64 */ - u32 MDEDebug; /* SDMA + 0x68 */ - u32 ADSDebug; /* SDMA + 0x6c */ - u32 Value1; /* SDMA + 0x70 */ - u32 Value2; /* SDMA + 0x74 */ - u32 Control; /* SDMA + 0x78 */ - u32 Status; /* SDMA + 0x7c */ - u32 PTDDebug; /* SDMA + 0x80 */ -}; - -/* GPT */ -struct mpc52xx_gpt { - u32 mode; /* GPTx + 0x00 */ - u32 count; /* GPTx + 0x04 */ - u32 pwm; /* GPTx + 0x08 */ - u32 status; /* GPTx + 0X0c */ -}; - -/* GPIO */ -struct mpc52xx_gpio { - u32 port_config; /* GPIO + 0x00 */ - u32 simple_gpioe; /* GPIO + 0x04 */ - u32 simple_ode; /* GPIO + 0x08 */ - u32 simple_ddr; /* GPIO + 0x0c */ - u32 simple_dvo; /* GPIO + 0x10 */ - u32 simple_ival; /* GPIO + 0x14 */ - u8 outo_gpioe; /* GPIO + 0x18 */ - u8 reserved1[3]; /* GPIO + 0x19 */ - u8 outo_dvo; /* GPIO + 0x1c */ - u8 reserved2[3]; /* GPIO + 0x1d */ - u8 sint_gpioe; /* GPIO + 0x20 */ - u8 reserved3[3]; /* GPIO + 0x21 */ - u8 sint_ode; /* GPIO + 0x24 */ - u8 reserved4[3]; /* GPIO + 0x25 */ - u8 sint_ddr; /* GPIO + 0x28 */ - u8 reserved5[3]; /* GPIO + 0x29 */ - u8 sint_dvo; /* GPIO + 0x2c */ - u8 reserved6[3]; /* GPIO + 0x2d */ - u8 sint_inten; /* GPIO + 0x30 */ - u8 reserved7[3]; /* GPIO + 0x31 */ - u16 sint_itype; /* GPIO + 0x34 */ - u16 reserved8; /* GPIO + 0x36 */ - u8 gpio_control; /* GPIO + 0x38 */ - u8 reserved9[3]; /* GPIO + 0x39 */ - u8 sint_istat; /* GPIO + 0x3c */ - u8 sint_ival; /* GPIO + 0x3d */ - u8 bus_errs; /* GPIO + 0x3e */ - u8 reserved10; /* GPIO + 0x3f */ -}; - -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 -#define MPC52xx_GPIO_PCI_DIS (1<<15) - -/* GPIO with WakeUp*/ -struct mpc52xx_gpio_wkup { - u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ - u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ - u8 wkup_ode; /* GPIO_WKUP + 0x04 */ - u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ - u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ - u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ - u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ - u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ - u8 wkup_inten; /* GPIO_WKUP + 0x10 */ - u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ - u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ - u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ - u16 wkup_itype; /* GPIO_WKUP + 0x18 */ - u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ - u8 wkup_maste; /* GPIO_WKUP + 0x1C */ - u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ - u8 wkup_ival; /* GPIO_WKUP + 0x20 */ - u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ - u8 wkup_istat; /* GPIO_WKUP + 0x24 */ - u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ -}; - -/* XLB Bus control */ -struct mpc52xx_xlb { - u8 reserved[0x40]; - u32 config; /* XLB + 0x40 */ - u32 version; /* XLB + 0x44 */ - u32 status; /* XLB + 0x48 */ - u32 int_enable; /* XLB + 0x4c */ - u32 addr_capture; /* XLB + 0x50 */ - u32 bus_sig_capture; /* XLB + 0x54 */ - u32 addr_timeout; /* XLB + 0x58 */ - u32 data_timeout; /* XLB + 0x5c */ - u32 bus_act_timeout; /* XLB + 0x60 */ - u32 master_pri_enable; /* XLB + 0x64 */ - u32 master_priority; /* XLB + 0x68 */ - u32 base_address; /* XLB + 0x6c */ - u32 snoop_window; /* XLB + 0x70 */ -}; - -#define MPC52xx_XLB_CFG_PLDIS (1 << 31) -#define MPC52xx_XLB_CFG_SNOOP (1 << 15) - -/* Clock Distribution control */ -struct mpc52xx_cdm { - u32 jtag_id; /* CDM + 0x00 reg0 read only */ - u32 rstcfg; /* CDM + 0x04 reg1 read only */ - u32 breadcrumb; /* CDM + 0x08 reg2 */ - - u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ - u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ - u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ - u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ - - u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ - u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ - u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ - - u32 clk_enables; /* CDM + 0x14 reg5 */ - - u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ - u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ - - u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ - u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ - u8 reserved1; /* CDM + 0x1e reg7 byte2 */ - u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ - - u8 soft_reset; /* CDM + 0x20 u8 byte0 */ - u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ - u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ - - u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ - u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ - u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ - u8 reserved3; /* CDM + 0x27 reg9 byte3 */ - - u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ - u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ - - u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ - u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ - - u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ - u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ - - u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ - u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ -}; - -#endif /* __ASSEMBLY__ */ - - -/* ========================================================================= */ -/* Prototypes for MPC52xx sysdev */ -/* ========================================================================= */ - -#ifndef __ASSEMBLY__ - -/* mpc52xx_common.c */ -extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node); -extern void mpc5200_setup_xlb_arbiter(void); -extern void mpc52xx_declare_of_platform_devices(void); -extern void mpc52xx_map_common_devices(void); -extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); -extern void mpc52xx_restart(char *cmd); - -/* mpc52xx_pic.c */ -extern void mpc52xx_init_irq(void); -extern unsigned int mpc52xx_get_irq(void); - -/* mpc52xx_pci.c */ -#ifdef CONFIG_PCI -extern int __init mpc52xx_add_bridge(struct device_node *node); -extern void __init mpc52xx_setup_pci(void); -#else -static inline void mpc52xx_setup_pci(void) { } -#endif - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PM -struct mpc52xx_suspend { - void (*board_suspend_prepare)(void __iomem *mbar); - void (*board_resume_finish)(void __iomem *mbar); -}; - -extern struct mpc52xx_suspend mpc52xx_suspend; -extern int __init mpc52xx_pm_init(void); -extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); - -#ifdef CONFIG_PPC_LITE5200 -extern int __init lite5200_pm_init(void); - -/* lite5200 calls mpc5200 suspend functions, so here they are */ -extern int mpc52xx_pm_prepare(void); -extern int mpc52xx_pm_enter(suspend_state_t); -extern void mpc52xx_pm_finish(void); -extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ -#endif -#endif /* CONFIG_PM */ - -#endif /* __ASM_POWERPC_MPC52xx_H__ */ - diff --git a/include/asm-powerpc/mpc52xx_psc.h b/include/asm-powerpc/mpc52xx_psc.h deleted file mode 100644 index 8917ed630565..000000000000 --- a/include/asm-powerpc/mpc52xx_psc.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * include/asm-ppc/mpc52xx_psc.h - * - * Definitions of consts/structs to drive the Freescale MPC52xx OnChip - * PSCs. Theses are shared between multiple drivers since a PSC can be - * UART, AC97, IR, I2S, ... So this header is in asm-ppc. - * - * - * Maintainer : Sylvain Munaut - * - * Based/Extracted from some header of the 2.4 originally written by - * Dale Farnsworth - * - * Copyright (C) 2004 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_MPC52xx_PSC_H__ -#define __ASM_MPC52xx_PSC_H__ - -#include - -/* Max number of PSCs */ -#define MPC52xx_PSC_MAXNUM 6 - -/* Programmable Serial Controller (PSC) status register bits */ -#define MPC52xx_PSC_SR_CDE 0x0080 -#define MPC52xx_PSC_SR_RXRDY 0x0100 -#define MPC52xx_PSC_SR_RXFULL 0x0200 -#define MPC52xx_PSC_SR_TXRDY 0x0400 -#define MPC52xx_PSC_SR_TXEMP 0x0800 -#define MPC52xx_PSC_SR_OE 0x1000 -#define MPC52xx_PSC_SR_PE 0x2000 -#define MPC52xx_PSC_SR_FE 0x4000 -#define MPC52xx_PSC_SR_RB 0x8000 - -/* PSC Command values */ -#define MPC52xx_PSC_RX_ENABLE 0x0001 -#define MPC52xx_PSC_RX_DISABLE 0x0002 -#define MPC52xx_PSC_TX_ENABLE 0x0004 -#define MPC52xx_PSC_TX_DISABLE 0x0008 -#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 -#define MPC52xx_PSC_RST_RX 0x0020 -#define MPC52xx_PSC_RST_TX 0x0030 -#define MPC52xx_PSC_RST_ERR_STAT 0x0040 -#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 -#define MPC52xx_PSC_START_BRK 0x0060 -#define MPC52xx_PSC_STOP_BRK 0x0070 - -/* PSC TxRx FIFO status bits */ -#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 -#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 -#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 -#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 -#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 -#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 -#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 - -/* PSC interrupt status/mask bits */ -#define MPC52xx_PSC_IMR_TXRDY 0x0100 -#define MPC52xx_PSC_IMR_RXRDY 0x0200 -#define MPC52xx_PSC_IMR_DB 0x0400 -#define MPC52xx_PSC_IMR_TXEMP 0x0800 -#define MPC52xx_PSC_IMR_ORERR 0x1000 -#define MPC52xx_PSC_IMR_IPC 0x8000 - -/* PSC input port change bit */ -#define MPC52xx_PSC_CTS 0x01 -#define MPC52xx_PSC_DCD 0x02 -#define MPC52xx_PSC_D_CTS 0x10 -#define MPC52xx_PSC_D_DCD 0x20 - -/* PSC mode fields */ -#define MPC52xx_PSC_MODE_5_BITS 0x00 -#define MPC52xx_PSC_MODE_6_BITS 0x01 -#define MPC52xx_PSC_MODE_7_BITS 0x02 -#define MPC52xx_PSC_MODE_8_BITS 0x03 -#define MPC52xx_PSC_MODE_BITS_MASK 0x03 -#define MPC52xx_PSC_MODE_PAREVEN 0x00 -#define MPC52xx_PSC_MODE_PARODD 0x04 -#define MPC52xx_PSC_MODE_PARFORCE 0x08 -#define MPC52xx_PSC_MODE_PARNONE 0x10 -#define MPC52xx_PSC_MODE_ERR 0x20 -#define MPC52xx_PSC_MODE_FFULL 0x40 -#define MPC52xx_PSC_MODE_RXRTS 0x80 - -#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 -#define MPC52xx_PSC_MODE_ONE_STOP 0x07 -#define MPC52xx_PSC_MODE_TWO_STOP 0x0f - -#define MPC52xx_PSC_RFNUM_MASK 0x01ff - -#define MPC52xx_PSC_SICR_DTS1 (1 << 29) -#define MPC52xx_PSC_SICR_SHDR (1 << 28) -#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) -#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) -#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) -#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) -#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) -#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) -#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) -#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) -#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) -#define MPC52xx_PSC_SICR_GENCLK (1 << 23) -#define MPC52xx_PSC_SICR_I2S (1 << 22) -#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) -#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) -#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) -#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) -#define MPC52xx_PSC_SICR_ESAI (1 << 17) -#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) -#define MPC52xx_PSC_SICR_SPI (1 << 15) -#define MPC52xx_PSC_SICR_MSTR (1 << 14) -#define MPC52xx_PSC_SICR_CPOL (1 << 13) -#define MPC52xx_PSC_SICR_CPHA (1 << 12) -#define MPC52xx_PSC_SICR_USEEOF (1 << 11) -#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) - -/* Structure of the hardware registers */ -struct mpc52xx_psc { - u8 mode; /* PSC + 0x00 */ - u8 reserved0[3]; - union { /* PSC + 0x04 */ - u16 status; - u16 clock_select; - } sr_csr; -#define mpc52xx_psc_status sr_csr.status -#define mpc52xx_psc_clock_select sr_csr.clock_select - u16 reserved1; - u8 command; /* PSC + 0x08 */ - u8 reserved2[3]; - union { /* PSC + 0x0c */ - u8 buffer_8; - u16 buffer_16; - u32 buffer_32; - } buffer; -#define mpc52xx_psc_buffer_8 buffer.buffer_8 -#define mpc52xx_psc_buffer_16 buffer.buffer_16 -#define mpc52xx_psc_buffer_32 buffer.buffer_32 - union { /* PSC + 0x10 */ - u8 ipcr; - u8 acr; - } ipcr_acr; -#define mpc52xx_psc_ipcr ipcr_acr.ipcr -#define mpc52xx_psc_acr ipcr_acr.acr - u8 reserved3[3]; - union { /* PSC + 0x14 */ - u16 isr; - u16 imr; - } isr_imr; -#define mpc52xx_psc_isr isr_imr.isr -#define mpc52xx_psc_imr isr_imr.imr - u16 reserved4; - u8 ctur; /* PSC + 0x18 */ - u8 reserved5[3]; - u8 ctlr; /* PSC + 0x1c */ - u8 reserved6[3]; - /* BitClkDiv field of CCR is byte swapped in - * the hardware for mpc5200/b compatibility */ - u32 ccr; /* PSC + 0x20 */ - u32 ac97_slots; /* PSC + 0x24 */ - u32 ac97_cmd; /* PSC + 0x28 */ - u32 ac97_data; /* PSC + 0x2c */ - u8 ivr; /* PSC + 0x30 */ - u8 reserved8[3]; - u8 ip; /* PSC + 0x34 */ - u8 reserved9[3]; - u8 op1; /* PSC + 0x38 */ - u8 reserved10[3]; - u8 op0; /* PSC + 0x3c */ - u8 reserved11[3]; - u32 sicr; /* PSC + 0x40 */ - u8 ircr1; /* PSC + 0x44 */ - u8 reserved13[3]; - u8 ircr2; /* PSC + 0x44 */ - u8 reserved14[3]; - u8 irsdr; /* PSC + 0x4c */ - u8 reserved15[3]; - u8 irmdr; /* PSC + 0x50 */ - u8 reserved16[3]; - u8 irfdr; /* PSC + 0x54 */ - u8 reserved17[3]; -}; - -struct mpc52xx_psc_fifo { - u16 rfnum; /* PSC + 0x58 */ - u16 reserved18; - u16 tfnum; /* PSC + 0x5c */ - u16 reserved19; - u32 rfdata; /* PSC + 0x60 */ - u16 rfstat; /* PSC + 0x64 */ - u16 reserved20; - u8 rfcntl; /* PSC + 0x68 */ - u8 reserved21[5]; - u16 rfalarm; /* PSC + 0x6e */ - u16 reserved22; - u16 rfrptr; /* PSC + 0x72 */ - u16 reserved23; - u16 rfwptr; /* PSC + 0x76 */ - u16 reserved24; - u16 rflrfptr; /* PSC + 0x7a */ - u16 reserved25; - u16 rflwfptr; /* PSC + 0x7e */ - u32 tfdata; /* PSC + 0x80 */ - u16 tfstat; /* PSC + 0x84 */ - u16 reserved26; - u8 tfcntl; /* PSC + 0x88 */ - u8 reserved27[5]; - u16 tfalarm; /* PSC + 0x8e */ - u16 reserved28; - u16 tfrptr; /* PSC + 0x92 */ - u16 reserved29; - u16 tfwptr; /* PSC + 0x96 */ - u16 reserved30; - u16 tflrfptr; /* PSC + 0x9a */ - u16 reserved31; - u16 tflwfptr; /* PSC + 0x9e */ -}; - -#define MPC512x_PSC_FIFO_RESET_SLICE 0x80 -#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01 -#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04 - -#define MPC512x_PSC_FIFO_EMPTY 0x1 -#define MPC512x_PSC_FIFO_FULL 0x2 -#define MPC512x_PSC_FIFO_ALARM 0x4 -#define MPC512x_PSC_FIFO_URERR 0x8 -#define MPC512x_PSC_FIFO_ORERR 0x01 -#define MPC512x_PSC_FIFO_MEMERROR 0x02 - -struct mpc512x_psc_fifo { - u32 reserved1[10]; - u32 txcmd; /* PSC + 0x80 */ - u32 txalarm; /* PSC + 0x84 */ - u32 txsr; /* PSC + 0x88 */ - u32 txisr; /* PSC + 0x8c */ - u32 tximr; /* PSC + 0x90 */ - u32 txcnt; /* PSC + 0x94 */ - u32 txptr; /* PSC + 0x98 */ - u32 txsz; /* PSC + 0x9c */ - u32 reserved2[7]; - union { - u8 txdata_8; - u16 txdata_16; - u32 txdata_32; - } txdata; /* PSC + 0xbc */ -#define txdata_8 txdata.txdata_8 -#define txdata_16 txdata.txdata_16 -#define txdata_32 txdata.txdata_32 - u32 rxcmd; /* PSC + 0xc0 */ - u32 rxalarm; /* PSC + 0xc4 */ - u32 rxsr; /* PSC + 0xc8 */ - u32 rxisr; /* PSC + 0xcc */ - u32 rximr; /* PSC + 0xd0 */ - u32 rxcnt; /* PSC + 0xd4 */ - u32 rxptr; /* PSC + 0xd8 */ - u32 rxsz; /* PSC + 0xdc */ - u32 reserved3[7]; - union { - u8 rxdata_8; - u16 rxdata_16; - u32 rxdata_32; - } rxdata; /* PSC + 0xfc */ -#define rxdata_8 rxdata.rxdata_8 -#define rxdata_16 rxdata.rxdata_16 -#define rxdata_32 rxdata.rxdata_32 -}; - -#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h deleted file mode 100644 index effc2291beb2..000000000000 --- a/include/asm-powerpc/mpc6xx.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_POWERPC_MPC6xx_H -#define __ASM_POWERPC_MPC6xx_H - -void mpc6xx_enter_standby(void); - -#endif diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h deleted file mode 100644 index 03317e1e6185..000000000000 --- a/include/asm-powerpc/mpc8260.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8260 configuration, they all include - * this one and the configuration switching is done here. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_MPC8260_H__ -#define __ASM_POWERPC_MPC8260_H__ - -#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ - -#ifdef CONFIG_8260 - -#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) -#include -#endif - -#ifdef CONFIG_PCI_8260 -#include -#endif - -#endif /* CONFIG_8260 */ -#endif /* !__ASM_POWERPC_MPC8260_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mpc86xx.h b/include/asm-powerpc/mpc86xx.h deleted file mode 100644 index 15f650f987e7..000000000000 --- a/include/asm-powerpc/mpc86xx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * MPC86xx definitions - * - * Author: Jeff Brown - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_MPC86xx_H__ -#define __ASM_POWERPC_MPC86xx_H__ - -#include - -#ifdef CONFIG_PPC_86xx - -#define CPU0_BOOT_RELEASE 0x01000000 -#define CPU1_BOOT_RELEASE 0x02000000 -#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) -#define MCM_PORT_CONFIG_OFFSET 0x1010 - -/* Offset from CCSRBAR */ -#define MPC86xx_MCM_OFFSET (0x00000) -#define MPC86xx_MCM_SIZE (0x02000) - -#endif /* CONFIG_PPC_86xx */ -#endif /* __ASM_POWERPC_MPC86xx_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mpc8xx.h b/include/asm-powerpc/mpc8xx.h deleted file mode 100644 index 98f3c4f17328..000000000000 --- a/include/asm-powerpc/mpc8xx.h +++ /dev/null @@ -1,12 +0,0 @@ -/* This is the single file included by all MPC8xx build options. - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8xx configuration, they all include - * this one and the configuration switching is done here. - */ -#ifndef __CONFIG_8xx_DEFS -#define __CONFIG_8xx_DEFS - -extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops; - -#endif /* __CONFIG_8xx_DEFS */ diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h deleted file mode 100644 index fe566a348a86..000000000000 --- a/include/asm-powerpc/mpic.h +++ /dev/null @@ -1,481 +0,0 @@ -#ifndef _ASM_POWERPC_MPIC_H -#define _ASM_POWERPC_MPIC_H -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * Global registers - */ - -#define MPIC_GREG_BASE 0x01000 - -#define MPIC_GREG_FEATURE_0 0x00000 -#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 -#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 -#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 -#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 -#define MPIC_GREG_FEATURE_VERSION_MASK 0xff -#define MPIC_GREG_FEATURE_1 0x00010 -#define MPIC_GREG_GLOBAL_CONF_0 0x00020 -#define MPIC_GREG_GCONF_RESET 0x80000000 -#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 -#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 -#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff -#define MPIC_GREG_GCONF_MCK 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1 0x00030 -#define MPIC_GREG_GLOBAL_CONF_1_SIE 0x08000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK 0x70000000 -#define MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r) \ - (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK) -#define MPIC_GREG_VENDOR_0 0x00040 -#define MPIC_GREG_VENDOR_1 0x00050 -#define MPIC_GREG_VENDOR_2 0x00060 -#define MPIC_GREG_VENDOR_3 0x00070 -#define MPIC_GREG_VENDOR_ID 0x00080 -#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 -#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 -#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 -#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff -#define MPIC_GREG_PROCESSOR_INIT 0x00090 -#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 -#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 -#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 -#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 -#define MPIC_GREG_IPI_STRIDE 0x10 -#define MPIC_GREG_SPURIOUS 0x000e0 -#define MPIC_GREG_TIMER_FREQ 0x000f0 - -/* - * - * Timer registers - */ -#define MPIC_TIMER_BASE 0x01100 -#define MPIC_TIMER_STRIDE 0x40 - -#define MPIC_TIMER_CURRENT_CNT 0x00000 -#define MPIC_TIMER_BASE_CNT 0x00010 -#define MPIC_TIMER_VECTOR_PRI 0x00020 -#define MPIC_TIMER_DESTINATION 0x00030 - -/* - * Per-Processor registers - */ - -#define MPIC_CPU_THISBASE 0x00000 -#define MPIC_CPU_BASE 0x20000 -#define MPIC_CPU_STRIDE 0x01000 - -#define MPIC_CPU_IPI_DISPATCH_0 0x00040 -#define MPIC_CPU_IPI_DISPATCH_1 0x00050 -#define MPIC_CPU_IPI_DISPATCH_2 0x00060 -#define MPIC_CPU_IPI_DISPATCH_3 0x00070 -#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 -#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 -#define MPIC_CPU_TASKPRI_MASK 0x0000000f -#define MPIC_CPU_WHOAMI 0x00090 -#define MPIC_CPU_WHOAMI_MASK 0x0000001f -#define MPIC_CPU_INTACK 0x000a0 -#define MPIC_CPU_EOI 0x000b0 -#define MPIC_CPU_MCACK 0x000c0 - -/* - * Per-source registers - */ - -#define MPIC_IRQ_BASE 0x10000 -#define MPIC_IRQ_STRIDE 0x00020 -#define MPIC_IRQ_VECTOR_PRI 0x00000 -#define MPIC_VECPRI_MASK 0x80000000 -#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ -#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 -#define MPIC_VECPRI_PRIORITY_SHIFT 16 -#define MPIC_VECPRI_VECTOR_MASK 0x000007ff -#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 -#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define MPIC_VECPRI_POLARITY_MASK 0x00800000 -#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 -#define MPIC_VECPRI_SENSE_EDGE 0x00000000 -#define MPIC_VECPRI_SENSE_MASK 0x00400000 -#define MPIC_IRQ_DESTINATION 0x00010 - -#define MPIC_MAX_IRQ_SOURCES 2048 -#define MPIC_MAX_CPUS 32 -#define MPIC_MAX_ISU 32 - -/* - * Tsi108 implementation of MPIC has many differences from the original one - */ - -/* - * Global registers - */ - -#define TSI108_GREG_BASE 0x00000 -#define TSI108_GREG_FEATURE_0 0x00000 -#define TSI108_GREG_GLOBAL_CONF_0 0x00004 -#define TSI108_GREG_VENDOR_ID 0x0000c -#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ -#define TSI108_GREG_IPI_STRIDE 0x0c -#define TSI108_GREG_SPURIOUS 0x00010 -#define TSI108_GREG_TIMER_FREQ 0x00014 - -/* - * Timer registers - */ -#define TSI108_TIMER_BASE 0x0030 -#define TSI108_TIMER_STRIDE 0x10 -#define TSI108_TIMER_CURRENT_CNT 0x00000 -#define TSI108_TIMER_BASE_CNT 0x00004 -#define TSI108_TIMER_VECTOR_PRI 0x00008 -#define TSI108_TIMER_DESTINATION 0x0000c - -/* - * Per-Processor registers - */ -#define TSI108_CPU_BASE 0x00300 -#define TSI108_CPU_STRIDE 0x00040 -#define TSI108_CPU_IPI_DISPATCH_0 0x00200 -#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 -#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 -#define TSI108_CPU_WHOAMI 0xffffffff -#define TSI108_CPU_INTACK 0x00004 -#define TSI108_CPU_EOI 0x00008 -#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ - -/* - * Per-source registers - */ -#define TSI108_IRQ_BASE 0x00100 -#define TSI108_IRQ_STRIDE 0x00008 -#define TSI108_IRQ_VECTOR_PRI 0x00000 -#define TSI108_VECPRI_VECTOR_MASK 0x000000ff -#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 -#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 -#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 -#define TSI108_VECPRI_SENSE_EDGE 0x00000000 -#define TSI108_VECPRI_POLARITY_MASK 0x01000000 -#define TSI108_VECPRI_SENSE_MASK 0x02000000 -#define TSI108_IRQ_DESTINATION 0x00004 - -/* weird mpic register indices and mask bits in the HW info array */ -enum { - MPIC_IDX_GREG_BASE = 0, - MPIC_IDX_GREG_FEATURE_0, - MPIC_IDX_GREG_GLOBAL_CONF_0, - MPIC_IDX_GREG_VENDOR_ID, - MPIC_IDX_GREG_IPI_VECTOR_PRI_0, - MPIC_IDX_GREG_IPI_STRIDE, - MPIC_IDX_GREG_SPURIOUS, - MPIC_IDX_GREG_TIMER_FREQ, - - MPIC_IDX_TIMER_BASE, - MPIC_IDX_TIMER_STRIDE, - MPIC_IDX_TIMER_CURRENT_CNT, - MPIC_IDX_TIMER_BASE_CNT, - MPIC_IDX_TIMER_VECTOR_PRI, - MPIC_IDX_TIMER_DESTINATION, - - MPIC_IDX_CPU_BASE, - MPIC_IDX_CPU_STRIDE, - MPIC_IDX_CPU_IPI_DISPATCH_0, - MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, - MPIC_IDX_CPU_CURRENT_TASK_PRI, - MPIC_IDX_CPU_WHOAMI, - MPIC_IDX_CPU_INTACK, - MPIC_IDX_CPU_EOI, - MPIC_IDX_CPU_MCACK, - - MPIC_IDX_IRQ_BASE, - MPIC_IDX_IRQ_STRIDE, - MPIC_IDX_IRQ_VECTOR_PRI, - - MPIC_IDX_VECPRI_VECTOR_MASK, - MPIC_IDX_VECPRI_POLARITY_POSITIVE, - MPIC_IDX_VECPRI_POLARITY_NEGATIVE, - MPIC_IDX_VECPRI_SENSE_LEVEL, - MPIC_IDX_VECPRI_SENSE_EDGE, - MPIC_IDX_VECPRI_POLARITY_MASK, - MPIC_IDX_VECPRI_SENSE_MASK, - MPIC_IDX_IRQ_DESTINATION, - MPIC_IDX_END -}; - - -#ifdef CONFIG_MPIC_U3_HT_IRQS -/* Fixup table entry */ -struct mpic_irq_fixup -{ - u8 __iomem *base; - u8 __iomem *applebase; - u32 data; - unsigned int index; -}; -#endif /* CONFIG_MPIC_U3_HT_IRQS */ - - -enum mpic_reg_type { - mpic_access_mmio_le, - mpic_access_mmio_be, -#ifdef CONFIG_PPC_DCR - mpic_access_dcr -#endif -}; - -struct mpic_reg_bank { - u32 __iomem *base; -#ifdef CONFIG_PPC_DCR - dcr_host_t dhost; -#endif /* CONFIG_PPC_DCR */ -}; - -struct mpic_irq_save { - u32 vecprio, - dest; -#ifdef CONFIG_MPIC_U3_HT_IRQS - u32 fixup_data; -#endif -}; - -/* The instance data of a given MPIC */ -struct mpic -{ - /* The remapper for this MPIC */ - struct irq_host *irqhost; - - /* The "linux" controller struct */ - struct irq_chip hc_irq; -#ifdef CONFIG_MPIC_U3_HT_IRQS - struct irq_chip hc_ht_irq; -#endif -#ifdef CONFIG_SMP - struct irq_chip hc_ipi; -#endif - const char *name; - /* Flags */ - unsigned int flags; - /* How many irq sources in a given ISU */ - unsigned int isu_size; - unsigned int isu_shift; - unsigned int isu_mask; - unsigned int irq_count; - /* Number of sources */ - unsigned int num_sources; - /* Number of CPUs */ - unsigned int num_cpus; - /* default senses array */ - unsigned char *senses; - unsigned int senses_count; - - /* vector numbers used for internal sources (ipi/timers) */ - unsigned int ipi_vecs[4]; - unsigned int timer_vecs[4]; - - /* Spurious vector to program into unused sources */ - unsigned int spurious_vec; - -#ifdef CONFIG_MPIC_U3_HT_IRQS - /* The fixup table */ - struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; -#endif - - /* Register access method */ - enum mpic_reg_type reg_type; - - /* The various ioremap'ed bases */ - struct mpic_reg_bank gregs; - struct mpic_reg_bank tmregs; - struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; - struct mpic_reg_bank isus[MPIC_MAX_ISU]; - - /* Protected sources */ - unsigned long *protected; - -#ifdef CONFIG_MPIC_WEIRD - /* Pointer to HW info array */ - u32 *hw_set; -#endif - -#ifdef CONFIG_PCI_MSI - spinlock_t bitmap_lock; - unsigned long *hwirq_bitmap; -#endif - -#ifdef CONFIG_MPIC_BROKEN_REGREAD - u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; -#endif - - /* link */ - struct mpic *next; - - struct sys_device sysdev; - -#ifdef CONFIG_PM - struct mpic_irq_save *save_data; -#endif -}; - -/* - * MPIC flags (passed to mpic_alloc) - * - * The top 4 bits contain an MPIC bhw id that is used to index the - * register offsets and some masks when CONFIG_MPIC_WEIRD is set. - * Note setting any ID (leaving those bits to 0) means standard MPIC - */ - -/* This is the primary controller, only that one has IPIs and - * has afinity control. A non-primary MPIC always uses CPU0 - * registers only - */ -#define MPIC_PRIMARY 0x00000001 - -/* Set this for a big-endian MPIC */ -#define MPIC_BIG_ENDIAN 0x00000002 -/* Broken U3 MPIC */ -#define MPIC_U3_HT_IRQS 0x00000004 -/* Broken IPI registers (autodetected) */ -#define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 -/* Spurious vector requires EOI */ -#define MPIC_SPV_EOI 0x00000020 -/* No passthrough disable */ -#define MPIC_NO_PTHROU_DIS 0x00000040 -/* DCR based MPIC */ -#define MPIC_USES_DCR 0x00000080 -/* MPIC has 11-bit vector fields (or larger) */ -#define MPIC_LARGE_VECTORS 0x00000100 -/* Enable delivery of prio 15 interrupts as MCK instead of EE */ -#define MPIC_ENABLE_MCK 0x00000200 -/* Disable bias among target selection, spread interrupts evenly */ -#define MPIC_NO_BIAS 0x00000400 -/* Ignore NIRQS as reported by FRR */ -#define MPIC_BROKEN_FRR_NIRQS 0x00000800 - -/* MPIC HW modification ID */ -#define MPIC_REGSET_MASK 0xf0000000 -#define MPIC_REGSET(val) (((val) & 0xf ) << 28) -#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) - -#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ -#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ - -/* Allocate the controller structure and setup the linux irq descs - * for the range if interrupts passed in. No HW initialization is - * actually performed. - * - * @phys_addr: physial base address of the MPIC - * @flags: flags, see constants above - * @isu_size: number of interrupts in an ISU. Use 0 to use a - * standard ISU-less setup (aka powermac) - * @irq_offset: first irq number to assign to this mpic - * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 - * to match the number of sources - * @ipi_offset: first irq number to assign to this mpic IPI sources, - * used only on primary mpic - * @senses: array of sense values - * @senses_num: number of entries in the array - * - * Note about the sense array. If none is passed, all interrupts are - * setup to be level negative unless MPIC_U3_HT_IRQS is set in which - * case they are edge positive (and the array is ignored anyway). - * The values in the array start at the first source of the MPIC, - * that is senses[0] correspond to linux irq "irq_offset". - */ -extern struct mpic *mpic_alloc(struct device_node *node, - phys_addr_t phys_addr, - unsigned int flags, - unsigned int isu_size, - unsigned int irq_count, - const char *name); - -/* Assign ISUs, to call before mpic_init() - * - * @mpic: controller structure as returned by mpic_alloc() - * @isu_num: ISU number - * @phys_addr: physical address of the ISU - */ -extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, - phys_addr_t phys_addr); - -/* Set default sense codes - * - * @mpic: controller - * @senses: array of sense codes - * @count: size of above array - * - * Optionally provide an array (indexed on hardware interrupt numbers - * for this MPIC) of default sense codes for the chip. Those are linux - * sense codes IRQ_TYPE_* - * - * The driver gets ownership of the pointer, don't dispose of it or - * anything like that. __init only. - */ -extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count); - - -/* Initialize the controller. After this has been called, none of the above - * should be called again for this mpic - */ -extern void mpic_init(struct mpic *mpic); - -/* - * All of the following functions must only be used after the - * ISUs have been assigned and the controller fully initialized - * with mpic_init() - */ - - -/* Change the priority of an interrupt. Default is 8 for irqs and - * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the - * IPI number is then the offset'ed (linux irq number mapped to the IPI) - */ -extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); - -/* Setup a non-boot CPU */ -extern void mpic_setup_this_cpu(void); - -/* Clean up for kexec (or cpu offline or ...) */ -extern void mpic_teardown_this_cpu(int secondary); - -/* Get the current cpu priority for this cpu (0..15) */ -extern int mpic_cpu_get_priority(void); - -/* Set the current cpu priority for this cpu */ -extern void mpic_cpu_set_priority(int prio); - -/* Request IPIs on primary mpic */ -extern void mpic_request_ipis(void); - -/* Send an IPI (non offseted number 0..3) */ -extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); - -/* Send a message (IPI) to a given target (cpu number or MSG_*) */ -void smp_mpic_message_pass(int target, int msg); - -/* Unmask a specific virq */ -extern void mpic_unmask_irq(unsigned int irq); -/* Mask a specific virq */ -extern void mpic_mask_irq(unsigned int irq); -/* EOI a specific virq */ -extern void mpic_end_irq(unsigned int irq); - -/* Fetch interrupt from a given mpic */ -extern unsigned int mpic_get_one_irq(struct mpic *mpic); -/* This one gets from the primary mpic */ -extern unsigned int mpic_get_irq(void); -/* Fetch Machine Check interrupt from primary mpic */ -extern unsigned int mpic_get_mcirq(void); - -/* Set the EPIC clock ratio */ -void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); - -/* Enable/Disable EPIC serial interrupt mode */ -void mpic_set_serial_int(struct mpic *mpic, int enable); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/include/asm-powerpc/msgbuf.h b/include/asm-powerpc/msgbuf.h deleted file mode 100644 index dd76743c7537..000000000000 --- a/include/asm-powerpc/msgbuf.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef _ASM_POWERPC_MSGBUF_H -#define _ASM_POWERPC_MSGBUF_H - -/* - * The msqid64_ds structure for the PowerPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifndef __powerpc64__ - unsigned int __unused1; -#endif - __kernel_time_t msg_stime; /* last msgsnd time */ -#ifndef __powerpc64__ - unsigned int __unused2; -#endif - __kernel_time_t msg_rtime; /* last msgrcv time */ -#ifndef __powerpc64__ - unsigned int __unused3; -#endif - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_POWERPC_MSGBUF_H */ diff --git a/include/asm-powerpc/mutex.h b/include/asm-powerpc/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-powerpc/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h deleted file mode 100644 index efde5ac82f7b..000000000000 --- a/include/asm-powerpc/nvram.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * NVRAM definitions and access functions. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_NVRAM_H -#define _ASM_POWERPC_NVRAM_H - -#include - -#define NVRW_CNT 0x20 -#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */ -#define NVRAM_BLOCK_LEN 16 -#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN) -#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN) - -#define NVRAM_AS0 0x74 -#define NVRAM_AS1 0x75 -#define NVRAM_DATA 0x77 - - -/* RTC Offsets */ - -#define MOTO_RTC_SECONDS 0x1FF9 -#define MOTO_RTC_MINUTES 0x1FFA -#define MOTO_RTC_HOURS 0x1FFB -#define MOTO_RTC_DAY_OF_WEEK 0x1FFC -#define MOTO_RTC_DAY_OF_MONTH 0x1FFD -#define MOTO_RTC_MONTH 0x1FFE -#define MOTO_RTC_YEAR 0x1FFF -#define MOTO_RTC_CONTROLA 0x1FF8 -#define MOTO_RTC_CONTROLB 0x1FF9 - -#define NVRAM_SIG_SP 0x02 /* support processor */ -#define NVRAM_SIG_OF 0x50 /* open firmware config */ -#define NVRAM_SIG_FW 0x51 /* general firmware */ -#define NVRAM_SIG_HW 0x52 /* hardware (VPD) */ -#define NVRAM_SIG_FLIP 0x5a /* Apple flip/flop header */ -#define NVRAM_SIG_APPL 0x5f /* Apple "system" (???) */ -#define NVRAM_SIG_SYS 0x70 /* system env vars */ -#define NVRAM_SIG_CFG 0x71 /* config data */ -#define NVRAM_SIG_ELOG 0x72 /* error log */ -#define NVRAM_SIG_VEND 0x7e /* vendor defined */ -#define NVRAM_SIG_FREE 0x7f /* Free space */ -#define NVRAM_SIG_OS 0xa0 /* OS defined */ -#define NVRAM_SIG_PANIC 0xa1 /* Apple OSX "panic" */ - -/* If change this size, then change the size of NVNAME_LEN */ -struct nvram_header { - unsigned char signature; - unsigned char checksum; - unsigned short length; - char name[12]; -}; - -#ifdef __KERNEL__ - -#include - -struct nvram_partition { - struct list_head partition; - struct nvram_header header; - unsigned int index; -}; - - -extern int nvram_write_error_log(char * buff, int length, - unsigned int err_type, unsigned int err_seq); -extern int nvram_read_error_log(char * buff, int length, - unsigned int * err_type, unsigned int *err_seq); -extern int nvram_clear_error_log(void); -extern struct nvram_partition *nvram_find_partition(int sig, const char *name); - -extern int pSeries_nvram_init(void); - -#ifdef CONFIG_MMIO_NVRAM -extern int mmio_nvram_init(void); -#else -static inline int mmio_nvram_init(void) -{ - return -ENODEV; -} -#endif - -#endif /* __KERNEL__ */ - -/* PowerMac specific nvram stuffs */ - -enum { - pmac_nvram_OF, /* Open Firmware partition */ - pmac_nvram_XPRAM, /* MacOS XPRAM partition */ - pmac_nvram_NR /* MacOS Name Registry partition */ -}; - -#ifdef __KERNEL__ -/* Return partition offset in nvram */ -extern int pmac_get_partition(int partition); - -/* Direct access to XPRAM on PowerMacs */ -extern u8 pmac_xpram_read(int xpaddr); -extern void pmac_xpram_write(int xpaddr, u8 data); - -/* Synchronize NVRAM */ -extern void nvram_sync(void); - -/* Normal access to NVRAM */ -extern unsigned char nvram_read_byte(int i); -extern void nvram_write_byte(unsigned char c, int i); -#endif - -/* Some offsets in XPRAM */ -#define PMAC_XPRAM_MACHINE_LOC 0xe4 -#define PMAC_XPRAM_SOUND_VOLUME 0x08 - -/* Machine location structure in PowerMac XPRAM */ -struct pmac_machine_location { - unsigned int latitude; /* 2+30 bit Fractional number */ - unsigned int longitude; /* 2+30 bit Fractional number */ - unsigned int delta; /* mix of GMT delta and DLS */ -}; - -/* - * /dev/nvram ioctls - * - * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is - * definitely obsolete. Do not use it if you can avoid it - */ - -#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \ - _IOWR('p', 0x40, int) - -#define IOC_NVRAM_GET_OFFSET _IOWR('p', 0x42, int) /* Get NVRAM partition offset */ -#define IOC_NVRAM_SYNC _IO('p', 0x43) /* Sync NVRAM image */ - -#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h deleted file mode 100644 index 3c123990ca2e..000000000000 --- a/include/asm-powerpc/of_device.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASM_POWERPC_OF_DEVICE_H -#define _ASM_POWERPC_OF_DEVICE_H -#ifdef __KERNEL__ - -#include -#include - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device -{ - struct device_node *node; /* to be obsoleted */ - u64 dma_mask; /* DMA mask */ - struct device dev; /* Generic device interface */ -}; - -extern struct of_device *of_device_alloc(struct device_node *np, - const char *bus_id, - struct device *parent); - -extern int of_device_uevent(struct device *dev, - struct kobj_uevent_env *env); - -/* This is just here during the transition */ -#include - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OF_DEVICE_H */ diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h deleted file mode 100644 index 18659ef72139..000000000000 --- a/include/asm-powerpc/of_platform.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASM_POWERPC_OF_PLATFORM_H -#define _ASM_POWERPC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* This is just here during the transition */ -#include - -/* Platform drivers register/unregister */ -static inline int of_register_platform_driver(struct of_platform_driver *drv) -{ - return of_register_driver(drv, &of_platform_bus_type); -} -static inline void of_unregister_platform_driver(struct of_platform_driver *drv) -{ - of_unregister_driver(drv); -} - -/* Platform devices and busses creation */ -extern struct of_device *of_platform_device_create(struct device_node *np, - const char *bus_id, - struct device *parent); -/* pseudo "matches" value to not do deep probe */ -#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1) - -extern int of_platform_bus_probe(struct device_node *root, - const struct of_device_id *matches, - struct device *parent); - -extern struct of_device *of_find_device_by_phandle(phandle ph); - -extern void of_instantiate_rtc(void); - -#endif /* _ASM_POWERPC_OF_PLATFORM_H */ diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h deleted file mode 100644 index 0d030f9dea24..000000000000 --- a/include/asm-powerpc/ohare.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _ASM_POWERPC_OHARE_H -#define _ASM_POWERPC_OHARE_H -#ifdef __KERNEL__ -/* - * ohare.h: definitions for using the "O'Hare" I/O controller chip. - * - * Copyright (C) 1997 Paul Mackerras. - * - * BenH: Changed to match those of heathrow (but not all of them). Please - * check if I didn't break anything (especially the media bay). - */ - -/* offset from ohare base for feature control register */ -#define OHARE_MBCR 0x34 -#define OHARE_FCR 0x38 - -/* - * Bits in feature control register. - * These were mostly derived by experiment on a powerbook 3400 - * and may differ for other machines. - */ -#define OH_SCC_RESET 1 -#define OH_BAY_POWER_N 2 /* a guess */ -#define OH_BAY_PCI_ENABLE 4 /* a guess */ -#define OH_BAY_IDE_ENABLE 8 -#define OH_BAY_FLOPPY_ENABLE 0x10 -#define OH_IDE0_ENABLE 0x20 -#define OH_IDE0_RESET_N 0x40 /* a guess */ -#define OH_BAY_DEV_MASK 0x1c -#define OH_BAY_RESET_N 0x80 -#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ -#define OH_SCC_ENABLE 0x200 -#define OH_MESH_ENABLE 0x400 -#define OH_FLOPPY_ENABLE 0x800 -#define OH_SCCA_IO 0x4000 -#define OH_SCCB_IO 0x8000 -#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ -#define OH_IDE1_RESET_N 0x800000 - -/* - * Bits to set in the feature control register on PowerBooks. - */ -#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ - OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) - -/* - * A magic value to put into the feature control register of the - * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. - * Contributed by Harry Eaton. - */ -#define STARMAX_FEATURES 0xbeff7a - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OHARE_H */ diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h deleted file mode 100644 index 95035c602ba6..000000000000 --- a/include/asm-powerpc/oprofile_impl.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Copyright (C) 2004 Anton Blanchard , IBM - * - * Based on alpha version. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_OPROFILE_IMPL_H -#define _ASM_POWERPC_OPROFILE_IMPL_H -#ifdef __KERNEL__ - -#define OP_MAX_COUNTER 8 - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long enabled; - unsigned long event; - unsigned long count; - /* Classic doesn't support per-counter user/kernel selection */ - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; -}; - -/* System-wide configuration as set via oprofilefs. */ -struct op_system_config { -#ifdef CONFIG_PPC64 - unsigned long mmcr0; - unsigned long mmcr1; - unsigned long mmcra; -#endif - unsigned long enable_kernel; - unsigned long enable_user; -}; - -/* Per-arch configuration */ -struct op_powerpc_model { - int (*reg_setup) (struct op_counter_config *, - struct op_system_config *, - int num_counters); - int (*cpu_setup) (struct op_counter_config *); - int (*start) (struct op_counter_config *); - int (*global_start) (struct op_counter_config *); - void (*stop) (void); - void (*global_stop) (void); - int (*sync_start)(void); - int (*sync_stop)(void); - void (*handle_interrupt) (struct pt_regs *, - struct op_counter_config *); - int num_counters; -}; - -extern struct op_powerpc_model op_model_fsl_emb; -extern struct op_powerpc_model op_model_rs64; -extern struct op_powerpc_model op_model_power4; -extern struct op_powerpc_model op_model_7450; -extern struct op_powerpc_model op_model_cell; -extern struct op_powerpc_model op_model_pa6t; - - -/* All the classic PPC parts use these */ -static inline unsigned int classic_ctr_read(unsigned int i) -{ - switch(i) { - case 0: - return mfspr(SPRN_PMC1); - case 1: - return mfspr(SPRN_PMC2); - case 2: - return mfspr(SPRN_PMC3); - case 3: - return mfspr(SPRN_PMC4); - case 4: - return mfspr(SPRN_PMC5); - case 5: - return mfspr(SPRN_PMC6); - -/* No PPC32 chip has more than 6 so far */ -#ifdef CONFIG_PPC64 - case 6: - return mfspr(SPRN_PMC7); - case 7: - return mfspr(SPRN_PMC8); -#endif - default: - return 0; - } -} - -static inline void classic_ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { - case 0: - mtspr(SPRN_PMC1, val); - break; - case 1: - mtspr(SPRN_PMC2, val); - break; - case 2: - mtspr(SPRN_PMC3, val); - break; - case 3: - mtspr(SPRN_PMC4, val); - break; - case 4: - mtspr(SPRN_PMC5, val); - break; - case 5: - mtspr(SPRN_PMC6, val); - break; - -/* No PPC32 chip has more than 6, yet */ -#ifdef CONFIG_PPC64 - case 6: - mtspr(SPRN_PMC7, val); - break; - case 7: - mtspr(SPRN_PMC8, val); - break; -#endif - default: - break; - } -} - - -extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */ diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h deleted file mode 100644 index e482e5352e69..000000000000 --- a/include/asm-powerpc/pSeries_reconfig.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _PPC64_PSERIES_RECONFIG_H -#define _PPC64_PSERIES_RECONFIG_H -#ifdef __KERNEL__ - -#include - -/* - * Use this API if your code needs to know about OF device nodes being - * added or removed on pSeries systems. - */ - -#define PSERIES_RECONFIG_ADD 0x0001 -#define PSERIES_RECONFIG_REMOVE 0x0002 -#define PSERIES_DRCONF_MEM_ADD 0x0003 -#define PSERIES_DRCONF_MEM_REMOVE 0x0004 - -#ifdef CONFIG_PPC_PSERIES -extern int pSeries_reconfig_notifier_register(struct notifier_block *); -extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); -#else /* !CONFIG_PPC_PSERIES */ -static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb) -{ - return 0; -} -static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { } -#endif /* CONFIG_PPC_PSERIES */ - -#endif /* __KERNEL__ */ -#endif /* _PPC64_PSERIES_RECONFIG_H */ diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h deleted file mode 100644 index 7b564444ff61..000000000000 --- a/include/asm-powerpc/paca.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * include/asm-powerpc/paca.h - * - * This control block defines the PACA which defines the processor - * specific data for each logical processor on the system. - * There are some pointers defined that are utilized by PLIC. - * - * C 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_PACA_H -#define _ASM_POWERPC_PACA_H -#ifdef __KERNEL__ - -#include -#include -#include - -register struct paca_struct *local_paca asm("r13"); - -#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) -extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ -/* - * Add standard checks that preemption cannot occur when using get_paca(): - * otherwise the paca_struct it points to may be the wrong one just after. - */ -#define get_paca() ((void) debug_smp_processor_id(), local_paca) -#else -#define get_paca() local_paca -#endif - -#define get_lppaca() (get_paca()->lppaca_ptr) -#define get_slb_shadow() (get_paca()->slb_shadow_ptr) - -struct task_struct; - -/* - * Defines the layout of the paca. - * - * This structure is not directly accessed by firmware or the service - * processor. - */ -struct paca_struct { - /* - * Because hw_cpu_id, unlike other paca fields, is accessed - * routinely from other CPUs (from the IRQ code), we stick to - * read-only (after boot) fields in the first cacheline to - * avoid cacheline bouncing. - */ - - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - - /* - * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c - * load lock_token and paca_index with a single lwz - * instruction. They must travel together and be properly - * aligned. - */ - u16 lock_token; /* Constant 0x8000, used in locks */ - u16 paca_index; /* Logical processor number */ - - u64 kernel_toc; /* Kernel TOC address */ - u64 stab_real; /* Absolute address of segment table */ - u64 stab_addr; /* Virtual address of segment table */ - void *emergency_sp; /* pointer to emergency stack */ - u64 data_offset; /* per cpu data offset */ - s16 hw_cpu_id; /* Physical processor number */ - u8 cpu_start; /* At startup, processor spins until */ - /* this becomes non-zero. */ - struct slb_shadow *slb_shadow_ptr; - - /* - * Now, starting in cacheline 2, the exception save areas - */ - /* used for most interrupts/exceptions */ - u64 exgen[10] __attribute__((aligned(0x80))); - u64 exmc[10]; /* used for machine checks */ - u64 exslb[10]; /* used for SLB/segment table misses - * on the linear mapping */ - - mm_context_t context; - u16 vmalloc_sllp; - u16 slb_cache_ptr; - u16 slb_cache[SLB_CACHE_ENTRIES]; - - /* - * then miscellaneous read-write fields - */ - struct task_struct *__current; /* Pointer to current */ - u64 kstack; /* Saved Kernel stack addr */ - u64 stab_rr; /* stab/slb round-robin counter */ - u64 saved_r1; /* r1 save for RTAS calls */ - u64 saved_msr; /* MSR saved here by enter_rtas */ - u16 trap_save; /* Used when bad stack is encountered */ - u8 soft_enabled; /* irq soft-enable flag */ - u8 hard_enabled; /* set if irqs are enabled in MSR */ - u8 io_sync; /* writel() needs spin_unlock sync */ - - /* Stuff for accurate time accounting */ - u64 user_time; /* accumulated usermode TB ticks */ - u64 system_time; /* accumulated system TB ticks */ - u64 startpurr; /* PURR/TB value snapshot */ - u64 startspurr; /* SPURR value snapshot */ -}; - -extern struct paca_struct paca[]; -extern void initialise_pacas(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PACA_H */ diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h deleted file mode 100644 index e088545cb3f5..000000000000 --- a/include/asm-powerpc/page.h +++ /dev/null @@ -1,225 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_H -#define _ASM_POWERPC_PAGE_H - -/* - * Copyright (C) 2001,2005 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include - -/* - * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software - * page size. When using 64K pages however, whether we are really supporting - * 64K pages in HW or not is irrelevant to those definitions. - */ -#ifdef CONFIG_PPC_64K_PAGES -#define PAGE_SHIFT 16 -#else -#define PAGE_SHIFT 12 -#endif - -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) - -/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ -#define __HAVE_ARCH_GATE_AREA 1 - -/* - * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we - * assign PAGE_MASK to a larger type it gets extended the way we want - * (i.e. with 1s in the high bits) - */ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) - -/* - * KERNELBASE is the virtual address of the start of the kernel, it's often - * the same as PAGE_OFFSET, but _might not be_. - * - * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET. - * - * PAGE_OFFSET is the virtual address of the start of lowmem. - * - * PHYSICAL_START is the physical address of the start of the kernel. - * - * MEMORY_START is the physical address of the start of lowmem. - * - * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on - * ppc32 and based on how they are set we determine MEMORY_START. - * - * For the linear mapping the following equation should be true: - * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START - * - * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START - * - * There are two was to determine a physical address from a virtual one: - * va = pa + PAGE_OFFSET - MEMORY_START - * va = pa + KERNELBASE - PHYSICAL_START - * - * If you want to know something's offset from the start of the kernel you - * should subtract KERNELBASE. - * - * If you want to test if something's a kernel address, use is_kernel_addr(). - */ - -#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START) -#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) -#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) - -#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM) -#ifndef __ASSEMBLY__ -extern phys_addr_t memstart_addr; -extern phys_addr_t kernstart_addr; -#endif -#define PHYSICAL_START kernstart_addr -#define MEMORY_START memstart_addr -#else -#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) -#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) -#endif - -#ifdef CONFIG_FLATMEM -#define ARCH_PFN_OFFSET (MEMORY_START >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr)) -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE)) -#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE) - -/* - * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, - * and needs to be executable. This means the whole heap ends - * up being executable. - */ -#define VM_DATA_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_DATA_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#ifdef __powerpc64__ -#include -#else -#include -#endif - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr,size) _ALIGN_UP(addr,size) - -/* - * Don't compare things with KERNELBASE or PAGE_OFFSET to test for - * "kernelness", use is_kernel_addr() - it should do what you want. - */ -#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) - -#ifndef __ASSEMBLY__ - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* These are used to make use of C type-checking. */ - -/* PTE level */ -typedef struct { pte_basic_t pte; } pte_t; -#define pte_val(x) ((x).pte) -#define __pte(x) ((pte_t) { (x) }) - -/* 64k pages additionally define a bigger "real PTE" type that gathers - * the "second half" part of the PTE for pseudo 64k pages - */ -#ifdef CONFIG_PPC_64K_PAGES -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef struct { pte_t pte; } real_pte_t; -#endif - -/* PMD level */ -#ifdef CONFIG_PPC64 -typedef struct { unsigned long pmd; } pmd_t; -#define pmd_val(x) ((x).pmd) -#define __pmd(x) ((pmd_t) { (x) }) - -/* PUD level exusts only on 4k pages */ -#ifndef CONFIG_PPC_64K_PAGES -typedef struct { unsigned long pud; } pud_t; -#define pud_val(x) ((x).pud) -#define __pud(x) ((pud_t) { (x) }) -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -/* PGD level */ -typedef struct { unsigned long pgd; } pgd_t; -#define pgd_val(x) ((x).pgd) -#define __pgd(x) ((pgd_t) { (x) }) - -/* Page protection bits */ -typedef struct { unsigned long pgprot; } pgprot_t; -#define pgprot_val(x) ((x).pgprot) -#define __pgprot(x) ((pgprot_t) { (x) }) - -#else - -/* - * .. while these make it easier on the compiler - */ - -typedef pte_basic_t pte_t; -#define pte_val(x) (x) -#define __pte(x) (x) - -#ifdef CONFIG_PPC_64K_PAGES -typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; -#else -typedef unsigned long real_pte_t; -#endif - - -#ifdef CONFIG_PPC64 -typedef unsigned long pmd_t; -#define pmd_val(x) (x) -#define __pmd(x) (x) - -#ifndef CONFIG_PPC_64K_PAGES -typedef unsigned long pud_t; -#define pud_val(x) (x) -#define __pud(x) (x) -#endif /* !CONFIG_PPC_64K_PAGES */ -#endif /* CONFIG_PPC64 */ - -typedef unsigned long pgd_t; -#define pgd_val(x) (x) -#define pgprot_val(x) (x) - -typedef unsigned long pgprot_t; -#define __pgd(x) (x) -#define __pgprot(x) (x) - -#endif - -struct page; -extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long vaddr, - struct page *p); -extern int page_is_ram(unsigned long pfn); - -struct vm_area_struct; - -typedef struct page *pgtable_t; - -#include -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/include/asm-powerpc/page_32.h b/include/asm-powerpc/page_32.h deleted file mode 100644 index ebfae530a379..000000000000 --- a/include/asm-powerpc/page_32.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_32_H -#define _ASM_POWERPC_PAGE_32_H - -#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) -#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 -#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" -#endif -#endif - -#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 - -#ifdef CONFIG_NOT_COHERENT_CACHE -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES -#endif - -#ifndef __ASSEMBLY__ -/* - * The basic type of a PTE - 64 bits for those CPUs with > 32 bit - * physical addressing. For now this just the IBM PPC440. - */ -#ifdef CONFIG_PTE_64BIT -typedef unsigned long long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ -#else -typedef unsigned long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ -#endif - -struct page; -extern void clear_pages(void *page, int order); -static inline void clear_page(void *page) { clear_pages(page, 0); } -extern void copy_page(void *to, void *from); - -#include - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h deleted file mode 100644 index 043bfdfe4f73..000000000000 --- a/include/asm-powerpc/page_64.h +++ /dev/null @@ -1,185 +0,0 @@ -#ifndef _ASM_POWERPC_PAGE_64_H -#define _ASM_POWERPC_PAGE_64_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux - * specific, every notion of page number shared with the firmware, TCEs, - * iommu, etc... still uses a page size of 4K. - */ -#define HW_PAGE_SHIFT 12 -#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) -#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) - -/* - * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and - * HW_PAGE_SHIFT, that is 4K pages. - */ -#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) - -/* Segment size; normal 256M segments */ -#define SID_SHIFT 28 -#define SID_MASK ASM_CONST(0xfffffffff) -#define ESID_MASK 0xfffffffff0000000UL -#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) - -/* 1T segments */ -#define SID_SHIFT_1T 40 -#define SID_MASK_1T 0xffffffUL -#define ESID_MASK_1T 0xffffff0000000000UL -#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) - -#ifndef __ASSEMBLY__ -#include - -typedef unsigned long pte_basic_t; - -static __inline__ void clear_page(void *addr) -{ - unsigned long lines, line_size; - - line_size = ppc64_caches.dline_size; - lines = ppc64_caches.dlines_per_page; - - __asm__ __volatile__( - "mtctr %1 # clear_page\n\ -1: dcbz 0,%0\n\ - add %0,%0,%3\n\ - bdnz+ 1b" - : "=r" (addr) - : "r" (lines), "0" (addr), "r" (line_size) - : "ctr", "memory"); -} - -extern void copy_4K_page(void *to, void *from); - -#ifdef CONFIG_PPC_64K_PAGES -static inline void copy_page(void *to, void *from) -{ - unsigned int i; - for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) { - copy_4K_page(to, from); - to += 4096; - from += 4096; - } -} -#else /* CONFIG_PPC_64K_PAGES */ -static inline void copy_page(void *to, void *from) -{ - copy_4K_page(to, from); -} -#endif /* CONFIG_PPC_64K_PAGES */ - -/* Log 2 of page table size */ -extern u64 ppc64_pft_size; - -/* Large pages size */ -#ifdef CONFIG_HUGETLB_PAGE -extern unsigned int HPAGE_SHIFT; -#else -#define HPAGE_SHIFT PAGE_SHIFT -#endif -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) -#define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#define HUGE_MAX_HSTATE 3 - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PPC_MM_SLICES - -#define SLICE_LOW_SHIFT 28 -#define SLICE_HIGH_SHIFT 40 - -#define SLICE_LOW_TOP (0x100000000ul) -#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT) -#define SLICE_NUM_HIGH (PGTABLE_RANGE >> SLICE_HIGH_SHIFT) - -#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT) -#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT) - -#ifndef __ASSEMBLY__ - -struct slice_mask { - u16 low_slices; - u16 high_slices; -}; - -struct mm_struct; - -extern unsigned long slice_get_unmapped_area(unsigned long addr, - unsigned long len, - unsigned long flags, - unsigned int psize, - int topdown, - int use_cache); - -extern unsigned int get_slice_psize(struct mm_struct *mm, - unsigned long addr); - -extern void slice_init_context(struct mm_struct *mm, unsigned int psize); -extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); -extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, - unsigned long len, unsigned int psize); - -#define slice_mm_new_context(mm) ((mm)->context.id == 0) - -#endif /* __ASSEMBLY__ */ -#else -#define slice_init() -#define get_slice_psize(mm, addr) ((mm)->context.user_psize) -#define slice_set_user_psize(mm, psize) \ -do { \ - (mm)->context.user_psize = (psize); \ - (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ -} while (0) -#define slice_set_range_psize(mm, start, len, psize) \ - slice_set_user_psize((mm), (psize)) -#define slice_mm_new_context(mm) 1 -#endif /* CONFIG_PPC_MM_SLICES */ - -#ifdef CONFIG_HUGETLB_PAGE - -#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA - -#endif /* !CONFIG_HUGETLB_PAGE */ - -#ifdef MODULE -#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) -#else -#define __page_aligned \ - __attribute__((__aligned__(PAGE_SIZE), \ - __section__(".data.page_aligned"))) -#endif - -#define VM_DATA_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) - -/* - * This is the default if a program doesn't have a PT_GNU_STACK - * program header entry. The PPC64 ELF ABI has a non executable stack - * stack by default, so in the absense of a PT_GNU_STACK program header - * we turn execute permission off. - */ -#define VM_STACK_DEFAULT_FLAGS32 (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS64 (VM_READ | VM_WRITE | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#define VM_STACK_DEFAULT_FLAGS \ - (test_thread_flag(TIF_32BIT) ? \ - VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) - -#include - -#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/include/asm-powerpc/param.h b/include/asm-powerpc/param.h deleted file mode 100644 index 094f63d4d5ca..000000000000 --- a/include/asm-powerpc/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_PARAM_H -#define _ASM_POWERPC_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_POWERPC_PARAM_H */ diff --git a/include/asm-powerpc/parport.h b/include/asm-powerpc/parport.h deleted file mode 100644 index 414c50e2e881..000000000000 --- a/include/asm-powerpc/parport.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * parport.h: platform-specific PC-style parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef _ASM_POWERPC_PARPORT_H -#define _ASM_POWERPC_PARPORT_H -#ifdef __KERNEL__ - -#include - -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - struct device_node *np; - const u32 *prop; - u32 io1, io2; - int propsize; - int count = 0; - for (np = NULL; (np = of_find_compatible_node(np, - "parallel", - "pnpPNP,400")) != NULL;) { - prop = of_get_property(np, "reg", &propsize); - if (!prop || propsize > 6*sizeof(u32)) - continue; - io1 = prop[1]; io2 = prop[2]; - prop = of_get_property(np, "interrupts", NULL); - if (!prop) - continue; - if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL) - count++; - } - return count; -} - -#endif /* __KERNEL__ */ -#endif /* !(_ASM_POWERPC_PARPORT_H) */ diff --git a/include/asm-powerpc/pasemi_dma.h b/include/asm-powerpc/pasemi_dma.h deleted file mode 100644 index 19fd7933e2d9..000000000000 --- a/include/asm-powerpc/pasemi_dma.h +++ /dev/null @@ -1,538 +0,0 @@ -/* - * Copyright (C) 2006-2008 PA Semi, Inc - * - * Hardware register layout and descriptor formats for the on-board - * DMA engine on PA Semi PWRficient. Used by ethernet, function and security - * drivers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef ASM_PASEMI_DMA_H -#define ASM_PASEMI_DMA_H - -/* status register layout in IOB region, at 0xfb800000 */ -struct pasdma_status { - u64 rx_sta[64]; /* RX channel status */ - u64 tx_sta[20]; /* TX channel status */ -}; - - -/* All these registers live in the PCI configuration space for the DMA PCI - * device. Use the normal PCI config access functions for them. - */ -enum { - PAS_DMA_CAP_TXCH = 0x44, /* Transmit Channel Info */ - PAS_DMA_CAP_RXCH = 0x48, /* Transmit Channel Info */ - PAS_DMA_CAP_IFI = 0x4c, /* Interface Info */ - PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ - PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ - PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ - PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ - PAS_DMA_COM_CFG = 0x114, /* Common config reg */ - PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ - PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ - PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ - PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ -}; - - -#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */ -#define PAS_DMA_CAP_TXCH_TCHN_S 16 - -#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */ -#define PAS_DMA_CAP_RXCH_RCHN_S 16 - -#define PAS_DMA_CAP_IFI_IOFF_M 0xff000000 /* Cfg reg for intf pointers */ -#define PAS_DMA_CAP_IFI_IOFF_S 24 -#define PAS_DMA_CAP_IFI_NIN_M 0x00ff0000 /* # of interfaces */ -#define PAS_DMA_CAP_IFI_NIN_S 16 - -#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ -#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ - - -/* Per-interface and per-channel registers */ -#define _PAS_DMA_RXINT_STRIDE 0x20 -#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 -#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 -#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 -#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 -#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 -#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 -#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 -#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 -#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 -#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 -#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 -#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 -#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 -#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 -#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_CFG_RBP 0x80000000 -#define PAS_DMA_RXINT_CFG_ITRR 0x40000000 -#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000 -#define PAS_DMA_RXINT_CFG_DHL_S 24 -#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \ - PAS_DMA_RXINT_CFG_DHL_M) -#define PAS_DMA_RXINT_CFG_ITR 0x00400000 -#define PAS_DMA_RXINT_CFG_LW 0x00200000 -#define PAS_DMA_RXINT_CFG_L2 0x00100000 -#define PAS_DMA_RXINT_CFG_HEN 0x00080000 -#define PAS_DMA_RXINT_CFG_WIF 0x00000002 -#define PAS_DMA_RXINT_CFG_WIL 0x00000001 - -#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff -#define PAS_DMA_RXINT_INCR_INCR_S 0 -#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff) -#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f) -#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE) -#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff) -#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */ -#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \ - PAS_DMA_RXINT_BASEU_SIZ_M) - - -#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ -#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ -#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ -#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ -#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ -#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ -#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ -#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ -#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ -#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ -#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ -#define PAS_DMA_TXCHAN_TCMDSTA_SZ 0x00000800 -#define PAS_DMA_TXCHAN_TCMDSTA_DB 0x00000400 -#define PAS_DMA_TXCHAN_TCMDSTA_DE 0x00000200 -#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 -#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ -#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ -#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ -#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ -#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c -#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 -#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ - PAS_DMA_TXCHAN_CFG_TATTR_M) -#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 -#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 -#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 -#define PAS_DMA_TXCHAN_CFG_WT_S 6 -#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ - PAS_DMA_TXCHAN_CFG_WT_M) -#define PAS_DMA_TXCHAN_CFG_TRD 0x00010000 /* translate data */ -#define PAS_DMA_TXCHAN_CFG_TRR 0x00008000 /* translate rings */ -#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ -#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ -#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ -#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 -#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 -#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ - PAS_DMA_TXCHAN_BASEL_BRBL_M) -#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff -#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 -#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ - PAS_DMA_TXCHAN_BASEU_BRBH_M) -/* # of cache lines worth of buffer ring */ -#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 -#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ - PAS_DMA_TXCHAN_BASEU_SIZ_M) - -#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */ -#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */ -#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */ -#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */ -#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */ -#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */ -#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */ -#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */ -#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */ -#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */ -#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000 -#define PAS_DMA_RXCHAN_CCMDSTA_OD 0x00002000 -#define PAS_DMA_RXCHAN_CCMDSTA_FD 0x00001000 -#define PAS_DMA_RXCHAN_CCMDSTA_DT 0x00000800 -#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_CFG_CTR 0x00000400 -#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380 -#define PAS_DMA_RXCHAN_CFG_HBU_S 7 -#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \ - PAS_DMA_RXCHAN_CFG_HBU_M) -#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0 -#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0 -#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \ - PAS_DMA_RXCHAN_BASEL_BRBL_M) -#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE) -#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff -#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0 -#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \ - PAS_DMA_RXCHAN_BASEU_BRBH_M) -/* # of cache lines worth of buffer ring */ -#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000 -#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \ - PAS_DMA_RXCHAN_BASEU_SIZ_M) - -#define PAS_STATUS_PCNT_M 0x000000000000ffffull -#define PAS_STATUS_PCNT_S 0 -#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull -#define PAS_STATUS_DCNT_S 16 -#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull -#define PAS_STATUS_BPCNT_S 32 -#define PAS_STATUS_CAUSE_M 0xf000000000000000ull -#define PAS_STATUS_TIMER 0x1000000000000000ull -#define PAS_STATUS_ERROR 0x2000000000000000ull -#define PAS_STATUS_SOFT 0x4000000000000000ull -#define PAS_STATUS_INT 0x8000000000000000ull - -#define PAS_IOB_COM_PKTHDRCNT 0x120 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M 0x0fff0000 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S 16 -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M 0x00000fff -#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S 0 - -#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_RXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_TXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) -#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) -#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) -#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_RXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 -#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) -#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_TXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 - -#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) - -/* Transmit descriptor fields */ -#define XCT_MACTX_T 0x8000000000000000ull -#define XCT_MACTX_ST 0x4000000000000000ull -#define XCT_MACTX_NORES 0x0000000000000000ull -#define XCT_MACTX_8BRES 0x1000000000000000ull -#define XCT_MACTX_24BRES 0x2000000000000000ull -#define XCT_MACTX_40BRES 0x3000000000000000ull -#define XCT_MACTX_I 0x0800000000000000ull -#define XCT_MACTX_O 0x0400000000000000ull -#define XCT_MACTX_E 0x0200000000000000ull -#define XCT_MACTX_VLAN_M 0x0180000000000000ull -#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull -#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull -#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull -#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull -#define XCT_MACTX_CRC_M 0x0060000000000000ull -#define XCT_MACTX_CRC_NOP 0x0000000000000000ull -#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull -#define XCT_MACTX_CRC_PAD 0x0040000000000000ull -#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull -#define XCT_MACTX_SS 0x0010000000000000ull -#define XCT_MACTX_LLEN_M 0x00007fff00000000ull -#define XCT_MACTX_LLEN_S 32ull -#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ - XCT_MACTX_LLEN_M) -#define XCT_MACTX_IPH_M 0x00000000f8000000ull -#define XCT_MACTX_IPH_S 27ull -#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ - XCT_MACTX_IPH_M) -#define XCT_MACTX_IPO_M 0x0000000007c00000ull -#define XCT_MACTX_IPO_S 22ull -#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ - XCT_MACTX_IPO_M) -#define XCT_MACTX_CSUM_M 0x0000000000000060ull -#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull -#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull -#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull -#define XCT_MACTX_V6 0x0000000000000010ull -#define XCT_MACTX_C 0x0000000000000004ull -#define XCT_MACTX_AL2 0x0000000000000002ull - -/* Receive descriptor fields */ -#define XCT_MACRX_T 0x8000000000000000ull -#define XCT_MACRX_ST 0x4000000000000000ull -#define XCT_MACRX_RR_M 0x3000000000000000ull -#define XCT_MACRX_RR_NORES 0x0000000000000000ull -#define XCT_MACRX_RR_8BRES 0x1000000000000000ull -#define XCT_MACRX_O 0x0400000000000000ull -#define XCT_MACRX_E 0x0200000000000000ull -#define XCT_MACRX_FF 0x0100000000000000ull -#define XCT_MACRX_PF 0x0080000000000000ull -#define XCT_MACRX_OB 0x0040000000000000ull -#define XCT_MACRX_OD 0x0020000000000000ull -#define XCT_MACRX_FS 0x0010000000000000ull -#define XCT_MACRX_NB_M 0x000fc00000000000ull -#define XCT_MACRX_NB_S 46ULL -#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \ - XCT_MACRX_NB_M) -#define XCT_MACRX_LLEN_M 0x00003fff00000000ull -#define XCT_MACRX_LLEN_S 32ULL -#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \ - XCT_MACRX_LLEN_M) -#define XCT_MACRX_CRC 0x0000000080000000ull -#define XCT_MACRX_LEN_M 0x0000000060000000ull -#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull -#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull -#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull -#define XCT_MACRX_CAST_M 0x0000000018000000ull -#define XCT_MACRX_CAST_UNI 0x0000000000000000ull -#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull -#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull -#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull -#define XCT_MACRX_VLC_M 0x0000000006000000ull -#define XCT_MACRX_FM 0x0000000001000000ull -#define XCT_MACRX_HTY_M 0x0000000000c00000ull -#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull -#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull -#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull -#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull -#define XCT_MACRX_IPP_M 0x00000000003f0000ull -#define XCT_MACRX_IPP_S 16 -#define XCT_MACRX_CSUM_M 0x000000000000ffffull -#define XCT_MACRX_CSUM_S 0 - -#define XCT_PTR_T 0x8000000000000000ull -#define XCT_PTR_LEN_M 0x7ffff00000000000ull -#define XCT_PTR_LEN_S 44 -#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ - XCT_PTR_LEN_M) -#define XCT_PTR_ADDR_M 0x00000fffffffffffull -#define XCT_PTR_ADDR_S 0 -#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ - XCT_PTR_ADDR_M) - -/* Receive interface 8byte result fields */ -#define XCT_RXRES_8B_L4O_M 0xff00000000000000ull -#define XCT_RXRES_8B_L4O_S 56 -#define XCT_RXRES_8B_RULE_M 0x00ffff0000000000ull -#define XCT_RXRES_8B_RULE_S 40 -#define XCT_RXRES_8B_EVAL_M 0x000000ffff000000ull -#define XCT_RXRES_8B_EVAL_S 24 -#define XCT_RXRES_8B_HTYPE_M 0x0000000000f00000ull -#define XCT_RXRES_8B_HASH_M 0x00000000000fffffull -#define XCT_RXRES_8B_HASH_S 0 - -/* Receive interface buffer fields */ -#define XCT_RXB_LEN_M 0x0ffff00000000000ull -#define XCT_RXB_LEN_S 44 -#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_RXB_LEN_S) & \ - XCT_RXB_LEN_M) -#define XCT_RXB_ADDR_M 0x00000fffffffffffull -#define XCT_RXB_ADDR_S 0 -#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_RXB_ADDR_S) & \ - XCT_RXB_ADDR_M) - -/* Copy descriptor fields */ -#define XCT_COPY_T 0x8000000000000000ull -#define XCT_COPY_ST 0x4000000000000000ull -#define XCT_COPY_RR_M 0x3000000000000000ull -#define XCT_COPY_RR_NORES 0x0000000000000000ull -#define XCT_COPY_RR_8BRES 0x1000000000000000ull -#define XCT_COPY_RR_24BRES 0x2000000000000000ull -#define XCT_COPY_RR_40BRES 0x3000000000000000ull -#define XCT_COPY_I 0x0800000000000000ull -#define XCT_COPY_O 0x0400000000000000ull -#define XCT_COPY_E 0x0200000000000000ull -#define XCT_COPY_STY_ZERO 0x01c0000000000000ull -#define XCT_COPY_DTY_PREF 0x0038000000000000ull -#define XCT_COPY_LLEN_M 0x0007ffff00000000ull -#define XCT_COPY_LLEN_S 32 -#define XCT_COPY_LLEN(x) ((((long)(x)) << XCT_COPY_LLEN_S) & \ - XCT_COPY_LLEN_M) -#define XCT_COPY_SE 0x0000000000000001ull - -/* Function descriptor fields */ -#define XCT_FUN_T 0x8000000000000000ull -#define XCT_FUN_ST 0x4000000000000000ull -#define XCT_FUN_RR_M 0x3000000000000000ull -#define XCT_FUN_RR_NORES 0x0000000000000000ull -#define XCT_FUN_RR_8BRES 0x1000000000000000ull -#define XCT_FUN_RR_24BRES 0x2000000000000000ull -#define XCT_FUN_RR_40BRES 0x3000000000000000ull -#define XCT_FUN_I 0x0800000000000000ull -#define XCT_FUN_O 0x0400000000000000ull -#define XCT_FUN_E 0x0200000000000000ull -#define XCT_FUN_FUN_M 0x01c0000000000000ull -#define XCT_FUN_FUN_S 54 -#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) -#define XCT_FUN_CRM_M 0x0038000000000000ull -#define XCT_FUN_CRM_NOP 0x0000000000000000ull -#define XCT_FUN_CRM_SIG 0x0008000000000000ull -#define XCT_FUN_LLEN_M 0x0007ffff00000000ull -#define XCT_FUN_LLEN_S 32 -#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) -#define XCT_FUN_SHL_M 0x00000000f8000000ull -#define XCT_FUN_SHL_S 27 -#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) -#define XCT_FUN_CHL_M 0x0000000007c00000ull -#define XCT_FUN_HSZ_M 0x00000000003c0000ull -#define XCT_FUN_ALG_M 0x0000000000038000ull -#define XCT_FUN_HP 0x0000000000004000ull -#define XCT_FUN_BCM_M 0x0000000000003800ull -#define XCT_FUN_BCP_M 0x0000000000000600ull -#define XCT_FUN_SIG_M 0x00000000000001f0ull -#define XCT_FUN_SIG_TCP4 0x0000000000000140ull -#define XCT_FUN_SIG_TCP6 0x0000000000000150ull -#define XCT_FUN_SIG_UDP4 0x0000000000000160ull -#define XCT_FUN_SIG_UDP6 0x0000000000000170ull -#define XCT_FUN_A 0x0000000000000008ull -#define XCT_FUN_C 0x0000000000000004ull -#define XCT_FUN_AL2 0x0000000000000002ull -#define XCT_FUN_SE 0x0000000000000001ull - -/* Function descriptor 8byte result fields */ -#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull -#define XCT_FUNRES_8B_CS_S 32 -#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull -#define XCT_FUNRES_8B_CRC_S 0 - -/* Control descriptor fields */ -#define CTRL_CMD_T 0x8000000000000000ull -#define CTRL_CMD_META_EVT 0x2000000000000000ull -#define CTRL_CMD_O 0x0400000000000000ull -#define CTRL_CMD_ETYPE_M 0x0038000000000000ull -#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull -#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull -#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull -#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull -#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull -#define CTRL_CMD_REG_M 0x000000000000007full -#define CTRL_CMD_REG_S 0 -#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ - CTRL_CMD_REG_M) - - - -/* Prototypes for the shared DMA functions in the platform code. */ - -/* DMA TX Channel type. Right now only limitations used are event types 0/1, - * for event-triggered DMA transactions. - */ - -enum pasemi_dmachan_type { - RXCHAN = 0, /* Any RX chan */ - TXCHAN = 1, /* Any TX chan */ - TXCHAN_EVT0 = 0x1001, /* TX chan in event class 0 (chan 0-9) */ - TXCHAN_EVT1 = 0x2001, /* TX chan in event class 1 (chan 10-19) */ -}; - -struct pasemi_dmachan { - int chno; /* Channel number */ - enum pasemi_dmachan_type chan_type; /* TX / RX */ - u64 *status; /* Ptr to cacheable status */ - int irq; /* IRQ used by channel */ - unsigned int ring_size; /* size of allocated ring */ - dma_addr_t ring_dma; /* DMA address for ring */ - u64 *ring_virt; /* Virt address for ring */ - void *priv; /* Ptr to start of client struct */ -}; - -/* Read/write the different registers in the I/O Bridge, Ethernet - * and DMA Controller - */ -extern unsigned int pasemi_read_iob_reg(unsigned int reg); -extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val); - -extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg); -extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val); - -extern unsigned int pasemi_read_dma_reg(unsigned int reg); -extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val); - -/* Channel management routines */ - -extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, - int total_size, int offset); -extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan); - -extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, - const u32 cmdsta); -extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan); - -/* Common routines to allocate rings and buffers */ - -extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size); -extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan); - -extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, - dma_addr_t *handle); -extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, - dma_addr_t *handle); - -/* Routines to allocate flags (events) for channel syncronization */ -extern int pasemi_dma_alloc_flag(void); -extern void pasemi_dma_free_flag(int flag); -extern void pasemi_dma_set_flag(int flag); -extern void pasemi_dma_clear_flag(int flag); - -/* Routines to allocate function engines */ -extern int pasemi_dma_alloc_fun(void); -extern void pasemi_dma_free_fun(int fun); - -/* Initialize the library, must be called before any other functions */ -extern int pasemi_dma_init(void); - -#endif /* ASM_PASEMI_DMA_H */ diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h deleted file mode 100644 index ae2ea803a0f2..000000000000 --- a/include/asm-powerpc/pci-bridge.h +++ /dev/null @@ -1,302 +0,0 @@ -#ifndef _ASM_POWERPC_PCI_BRIDGE_H -#define _ASM_POWERPC_PCI_BRIDGE_H -#ifdef __KERNEL__ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include - -struct device_node; - -extern unsigned int ppc_pci_flags; -enum { - /* Force re-assigning all resources (ignore firmware - * setup completely) - */ - PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001, - - /* Re-assign all bus numbers */ - PPC_PCI_REASSIGN_ALL_BUS = 0x00000002, - - /* Do not try to assign, just use existing setup */ - PPC_PCI_PROBE_ONLY = 0x00000004, - - /* Don't bother with ISA alignment unless the bridge has - * ISA forwarding enabled - */ - PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, - - /* Enable domain numbers in /proc */ - PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010, - /* ... except for domain 0 */ - PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020, -}; - - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - struct pci_bus *bus; - char is_dynamic; -#ifdef CONFIG_PPC64 - int node; -#endif - struct device_node *dn; - struct list_head list_node; - struct device *parent; - - int first_busno; - int last_busno; -#ifndef CONFIG_PPC64 - int self_busno; -#endif - - void __iomem *io_base_virt; -#ifdef CONFIG_PPC64 - void *io_base_alloc; -#endif - resource_size_t io_base_phys; -#ifndef CONFIG_PPC64 - resource_size_t pci_io_size; -#endif - - /* Some machines (PReP) have a non 1:1 mapping of - * the PCI memory space in the CPU bus space - */ - resource_size_t pci_mem_offset; -#ifdef CONFIG_PPC64 - unsigned long pci_io_size; -#endif - - struct pci_ops *ops; - unsigned int __iomem *cfg_addr; - void __iomem *cfg_data; - -#ifndef CONFIG_PPC64 - /* - * Used for variants of PCI indirect handling and possible quirks: - * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 - * EXT_REG - provides access to PCI-e extended registers - * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS - * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS - * to determine which bus number to match on when generating type0 - * config cycles - * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with - * hanging if we don't have link and try to do config cycles to - * anything but the PHB. Only allow talking to the PHB if this is - * set. - * BIG_ENDIAN - cfg_addr is a big endian register - * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on - * the PLB4. Effectively disable MRM commands by setting this. - */ -#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 -#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 -#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 -#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 -#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 -#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 - u32 indirect_type; -#endif /* !CONFIG_PPC64 */ - /* Currently, we limit ourselves to 1 IO range and 3 mem - * ranges since the common pci_bus structure can't handle more - */ - struct resource io_resource; - struct resource mem_resources[3]; - int global_number; /* PCI domain number */ -#ifdef CONFIG_PPC64 - unsigned long buid; - unsigned long dma_window_base_cur; - unsigned long dma_window_size; - - void *private_data; -#endif /* CONFIG_PPC64 */ -}; - -#ifndef CONFIG_PPC64 - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - return bus->sysdata; -} - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* No specific ISA handling on ppc32 at this stage, it - * all goes through PCI - */ - return 0; -} - -/* These are used for config access before all the PCI probing - has been done. */ -extern int early_read_config_byte(struct pci_controller *hose, int bus, - int dev_fn, int where, u8 *val); -extern int early_read_config_word(struct pci_controller *hose, int bus, - int dev_fn, int where, u16 *val); -extern int early_read_config_dword(struct pci_controller *hose, int bus, - int dev_fn, int where, u32 *val); -extern int early_write_config_byte(struct pci_controller *hose, int bus, - int dev_fn, int where, u8 val); -extern int early_write_config_word(struct pci_controller *hose, int bus, - int dev_fn, int where, u16 val); -extern int early_write_config_dword(struct pci_controller *hose, int bus, - int dev_fn, int where, u32 val); - -extern int early_find_capability(struct pci_controller *hose, int bus, - int dev_fn, int cap); - -extern void setup_indirect_pci(struct pci_controller* hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags); -extern void setup_grackle(struct pci_controller *hose); -#else /* CONFIG_PPC64 */ - -/* - * PCI stuff, for nodes representing PCI devices, pointed to - * by device_node->data. - */ -struct iommu_table; - -struct pci_dn { - int busno; /* pci bus number */ - int devfn; /* pci device and function number */ - - struct pci_controller *phb; /* for pci devices */ - struct iommu_table *iommu_table; /* for phb's or bridges */ - struct device_node *node; /* back-pointer to the device_node */ - - int pci_ext_config_space; /* for pci devices */ - -#ifdef CONFIG_EEH - struct pci_dev *pcidev; /* back-pointer to the pci device */ - int class_code; /* pci device class */ - int eeh_mode; /* See eeh.h for possible EEH_MODEs */ - int eeh_config_addr; - int eeh_pe_config_addr; /* new-style partition endpoint address */ - int eeh_check_count; /* # times driver ignored error */ - int eeh_freeze_count; /* # times this device froze up. */ - int eeh_false_positives; /* # times this device reported #ff's */ - u32 config_space[16]; /* saved PCI config space */ -#endif -}; - -/* Get the pointer to a device_node's pci_dn */ -#define PCI_DN(dn) ((struct pci_dn *) (dn)->data) - -extern struct device_node *fetch_dev_dn(struct pci_dev *dev); - -/* Get a device_node from a pci_dev. This code must be fast except - * in the case where the sysdata is incorrect and needs to be fixed - * up (this will only happen once). - * In this case the sysdata will have been inherited from a PCI host - * bridge or a PCI-PCI bridge further up the tree, so it will point - * to a valid struct pci_dn, just not the one we want. - */ -static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) -{ - struct device_node *dn = dev->sysdata; - struct pci_dn *pdn = dn->data; - - if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) - return dn; /* fast path. sysdata is good */ - return fetch_dev_dn(dev); -} - -static inline int pci_device_from_OF_node(struct device_node *np, - u8 *bus, u8 *devfn) -{ - if (!PCI_DN(np)) - return -ENODEV; - *bus = PCI_DN(np)->busno; - *devfn = PCI_DN(np)->devfn; - return 0; -} - -static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) -{ - if (bus->self) - return pci_device_to_OF_node(bus->self); - else - return bus->sysdata; /* Must be root bus (PHB) */ -} - -/** Find the bus corresponding to the indicated device node */ -extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); - -/** Remove all of the PCI devices under this bus */ -extern void pcibios_remove_pci_devices(struct pci_bus *bus); - -/** Discover new pci devices under this bus, and add them */ -extern void pcibios_add_pci_devices(struct pci_bus *bus); -extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); - -extern int pcibios_remove_root_bus(struct pci_controller *phb); - -static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) -{ - struct device_node *busdn = bus->sysdata; - - BUG_ON(busdn == NULL); - return PCI_DN(busdn)->phb; -} - - -extern void isa_bridge_find_early(struct pci_controller *hose); - -static inline int isa_vaddr_is_ioport(void __iomem *address) -{ - /* Check if address hits the reserved legacy IO range */ - unsigned long ea = (unsigned long)address; - return ea >= ISA_IO_BASE && ea < ISA_IO_END; -} - -extern int pcibios_unmap_io_space(struct pci_bus *bus); -extern int pcibios_map_io_space(struct pci_bus *bus); - -/* Return values for ppc_md.pci_probe_mode function */ -#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ -#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ -#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ - -#ifdef CONFIG_NUMA -#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) -#else -#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1) -#endif - -#endif /* CONFIG_PPC64 */ - -/* Get the PCI host controller for an OF device */ -extern struct pci_controller *pci_find_hose_for_OF_device( - struct device_node* node); - -/* Fill up host controller resources from the OF node */ -extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary); - -/* Allocate & free a PCI host bridge structure */ -extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); -extern void pcibios_free_controller(struct pci_controller *phb); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -extern int pcibios_vaddr_is_ioport(void __iomem *address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -static inline int pcibios_vaddr_is_ioport(void __iomem *address) -{ - return 0; -} -#endif /* CONFIG_PCI */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PCI_BRIDGE_H */ diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h deleted file mode 100644 index a05a942b1c25..000000000000 --- a/include/asm-powerpc/pci.h +++ /dev/null @@ -1,228 +0,0 @@ -#ifndef __ASM_POWERPC_PCI_H -#define __ASM_POWERPC_PCI_H -#ifdef __KERNEL__ - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x10000000 - -struct pci_dev; - -/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - -/* - * Set this to 1 if you want the kernel to re-assign all PCI - * bus numbers (don't do that on ppc64 yet !) - */ -#define pcibios_assign_all_busses() (ppc_pci_flags & \ - PPC_PCI_REASSIGN_ALL_BUS) -#define pcibios_scan_all_fns(a, b) 0 - -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ -static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) -{ - if (ppc_md.pci_get_legacy_ide_irq) - return ppc_md.pci_get_legacy_ide_irq(dev, channel); - return channel ? 15 : 14; -} - -#ifdef CONFIG_PPC64 - -/* - * We want to avoid touching the cacheline size or MWI bit. - * pSeries firmware sets the cacheline size (which is not the cpu cacheline - * size in all cases) and hardware treats MWI the same as memory write. - */ -#define PCI_DISABLE_MWI - -#ifdef CONFIG_PCI -extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops); -extern struct dma_mapping_ops *get_pci_dma_ops(void); - -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - unsigned long cacheline_size; - u8 byte; - - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - *strat = PCI_DMA_BURST_MULTIPLE; - *strategy_parameter = cacheline_size; -} -#else /* CONFIG_PCI */ -#define set_pci_dma_ops(d) -#define get_pci_dma_ops() NULL -#endif - -#else /* 32-bit */ - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif -#endif /* CONFIG_PPC64 */ - -extern int pci_domain_nr(struct pci_bus *bus); - -/* Decide whether to display the domain number in /proc */ -extern int pci_proc_domain(struct pci_bus *bus); - - -struct vm_area_struct; -/* Map a range of PCI memory or I/O space for a device into user space */ -int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ -#define HAVE_PCI_MMAP 1 - -#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) -/* - * For 64-bit kernels, pci_unmap_{single,page} is not a nop. - * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and - * so on are not nops. - * and thus... - */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#else /* 32-bit && coherent */ - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ - -#ifdef CONFIG_PPC64 - -/* The PCI address space does not equal the physical memory address - * space (we have an IOMMU). The IDE and SCSI device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -#else /* 32-bit */ - -/* The PCI address space does equal the physical memory - * address space (no IOMMU). The IDE and SCSI device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#endif /* CONFIG_PPC64 */ - -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, - struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, - struct pci_bus_region *region); - -static inline struct resource *pcibios_select_root(struct pci_dev *pdev, - struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -extern void pcibios_setup_new_device(struct pci_dev *dev); - -extern void pcibios_claim_one_bus(struct pci_bus *b); - -extern void pcibios_resource_survey(void); - -extern struct pci_controller *init_phb_dynamic(struct device_node *dn); - -extern struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn); - -extern void of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev); - -extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); - -extern int pci_read_irq_line(struct pci_dev *dev); - -struct file; -extern pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t prot); - -#define HAVE_ARCH_PCI_RESOURCE_TO_USER -extern void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); - -extern void pcibios_do_bus_setup(struct pci_bus *bus); -extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus); - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_PCI_H */ diff --git a/include/asm-powerpc/percpu.h b/include/asm-powerpc/percpu.h deleted file mode 100644 index f879252b7ea6..000000000000 --- a/include/asm-powerpc/percpu.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_POWERPC_PERCPU_H_ -#define _ASM_POWERPC_PERCPU_H_ -#ifdef __powerpc64__ -#include - -/* - * Same as asm-generic/percpu.h, except that we store the per cpu offset - * in the paca. Based on the x86-64 implementation. - */ - -#ifdef CONFIG_SMP - -#include - -#define __per_cpu_offset(cpu) (paca[cpu].data_offset) -#define __my_cpu_offset local_paca->data_offset -#define per_cpu_offset(x) (__per_cpu_offset(x)) - -#endif /* CONFIG_SMP */ -#endif /* __powerpc64__ */ - -#include - -#endif /* _ASM_POWERPC_PERCPU_H_ */ diff --git a/include/asm-powerpc/pgalloc-32.h b/include/asm-powerpc/pgalloc-32.h deleted file mode 100644 index 58c07147b3ea..000000000000 --- a/include/asm-powerpc/pgalloc-32.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_32_H -#define _ASM_POWERPC_PGALLOC_32_H - -#include - -extern void __bad_pte(pmd_t *pmd); - -extern pgd_t *pgd_alloc(struct mm_struct *mm); -extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); - -/* - * We don't have any real pmd's, and this code never triggers because - * the pgd will always be present.. - */ -/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) -/* #define pgd_populate(mm, pmd, pte) BUG() */ - -#ifndef CONFIG_BOOKE -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#else -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#endif - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); -extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); -extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte); -extern void pte_free(struct mm_struct *mm, pgtable_t pte); - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) - -#define check_pgt_cache() do { } while (0) - -#endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h deleted file mode 100644 index 812a1d8f35cb..000000000000 --- a/include/asm-powerpc/pgalloc-64.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_64_H -#define _ASM_POWERPC_PGALLOC_64_H -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include - -#ifndef CONFIG_PPC_SUBPAGE_PROT -static inline void subpage_prot_free(pgd_t *pgd) {} -#endif - -extern struct kmem_cache *pgtable_cache[]; - -#define PGD_CACHE_NUM 0 -#define PUD_CACHE_NUM 1 -#define PMD_CACHE_NUM 1 -#define HUGEPTE_CACHE_NUM 2 -#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL); -} - -static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - subpage_prot_free(pgd); - kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd); -} - -#ifndef CONFIG_PPC_64K_PAGES - -#define pgd_populate(MM, PGD, PUD) pgd_set(PGD, PUD) - -static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM], - GFP_KERNEL|__GFP_REPEAT); -} - -static inline void pud_free(struct mm_struct *mm, pud_t *pud) -{ - kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud); -} - -static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) -{ - pud_set(pud, (unsigned long)pmd); -} - -#define pmd_populate(mm, pmd, pte_page) \ - pmd_populate_kernel(mm, pmd, page_address(pte_page)) -#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte)) -#define pmd_pgtable(pmd) pmd_page(pmd) - - -#else /* CONFIG_PPC_64K_PAGES */ - -#define pud_populate(mm, pud, pmd) pud_set(pud, (unsigned long)pmd) - -static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, - pte_t *pte) -{ - pmd_set(pmd, (unsigned long)pte); -} - -#define pmd_populate(mm, pmd, pte_page) \ - pmd_populate_kernel(mm, pmd, page_address(pte_page)) -#define pmd_pgtable(pmd) pmd_page(pmd) - -#endif /* CONFIG_PPC_64K_PAGES */ - -static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM], - GFP_KERNEL|__GFP_REPEAT); -} - -static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) -{ - kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd); -} - -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) -{ - return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); -} - -static inline pgtable_t pte_alloc_one(struct mm_struct *mm, - unsigned long address) -{ - struct page *page; - pte_t *pte; - - pte = pte_alloc_one_kernel(mm, address); - if (!pte) - return NULL; - page = virt_to_page(pte); - pgtable_page_ctor(page); - return page; -} - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) -{ - pgtable_page_dtor(ptepage); - __free_page(ptepage); -} - -#define PGF_CACHENUM_MASK 0x7 - -typedef struct pgtable_free { - unsigned long val; -} pgtable_free_t; - -static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, - unsigned long mask) -{ - BUG_ON(cachenum > PGF_CACHENUM_MASK); - - return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum}; -} - -static inline void pgtable_free(pgtable_free_t pgf) -{ - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); - int cachenum = pgf.val & PGF_CACHENUM_MASK; - - if (cachenum == PTE_NONCACHE_NUM) - free_page((unsigned long)p); - else - kmem_cache_free(pgtable_cache[cachenum], p); -} - -extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); - -#define __pte_free_tlb(tlb,ptepage) \ -do { \ - pgtable_page_dtor(ptepage); \ - pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \ - PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \ -} while (0) -#define __pmd_free_tlb(tlb, pmd) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ - PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) -#ifndef CONFIG_PPC_64K_PAGES -#define __pud_free_tlb(tlb, pud) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ - PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) -#endif /* CONFIG_PPC_64K_PAGES */ - -#define check_pgt_cache() do { } while (0) - -#endif /* _ASM_POWERPC_PGALLOC_64_H */ diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h deleted file mode 100644 index b4505ed0f0f2..000000000000 --- a/include/asm-powerpc/pgalloc.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_POWERPC_PGALLOC_H -#define _ASM_POWERPC_PGALLOC_H -#ifdef __KERNEL__ - -#ifdef CONFIG_PPC64 -#include -#else -#include -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h deleted file mode 100644 index 6b18ba9d2d85..000000000000 --- a/include/asm-powerpc/pgtable-4k.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_4K_H -#define _ASM_POWERPC_PGTABLE_4K_H -/* - * Entries per page directory level. The PTE level must use a 64b record - * for each page table entry. The PMD and PGD level use a 32b record for - * each entry by assuming that each entry is page aligned. - */ -#define PTE_INDEX_SIZE 9 -#define PMD_INDEX_SIZE 7 -#define PUD_INDEX_SIZE 7 -#define PGD_INDEX_SIZE 9 - -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) -#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) -#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) -#endif /* __ASSEMBLY__ */ - -#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) -#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PUD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) - -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* With 4k base page size, hugepage PTEs go at the PMD level */ -#define MIN_HUGEPTE_SHIFT PMD_SHIFT - -/* PUD_SHIFT determines what a third-level page table entry can map */ -#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE-1)) - -/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ -#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* PTE bits */ -#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ -#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ -#define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ -#define _PAGE_F_SECOND _PAGE_SECONDARY -#define _PAGE_F_GIX _PAGE_GROUP_IX -#define _PAGE_SPECIAL 0x10000 /* software: special page */ -#define __HAVE_ARCH_PTE_SPECIAL - -/* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ - _PAGE_SECONDARY | _PAGE_GROUP_IX) - -/* There is no 4K PFN hack on 4K pages */ -#define _PAGE_4K_PFN 0 - -/* PAGE_MASK gives the right answer below, but only by accident */ -/* It should be preserving the high 48 bits and then specifically */ -/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_HPTEFLAGS) - -/* Bits to mask out from a PMD to get to the PTE page */ -#define PMD_MASKED_BITS 0 -/* Bits to mask out from a PUD to get to the PMD page */ -#define PUD_MASKED_BITS 0 -/* Bits to mask out from a PGD to get to the PUD page */ -#define PGD_MASKED_BITS 0 - -/* shift to put page number into pte */ -#define PTE_RPN_SHIFT (17) - -#ifdef STRICT_MM_TYPECHECKS -#define __real_pte(e,p) ((real_pte_t){(e)}) -#define __rpte_to_pte(r) ((r).pte) -#else -#define __real_pte(e,p) (e) -#define __rpte_to_pte(r) (__pte(r)) -#endif -#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> 12) - -#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ - do { \ - index = 0; \ - shift = mmu_psize_defs[psize].shift; \ - -#define pte_iterate_hashed_end() } while(0) - -#ifdef CONFIG_PPC_HAS_HASH_64K -#define pte_pagesize_index(mm, addr, pte) get_slice_psize(mm, addr) -#else -#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K -#endif - -/* - * 4-level page tables related bits - */ - -#define pgd_none(pgd) (!pgd_val(pgd)) -#define pgd_bad(pgd) (pgd_val(pgd) == 0) -#define pgd_present(pgd) (pgd_val(pgd) != 0) -#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0) -#define pgd_page_vaddr(pgd) (pgd_val(pgd) & ~PGD_MASKED_BITS) -#define pgd_page(pgd) virt_to_page(pgd_page_vaddr(pgd)) - -#define pud_offset(pgdp, addr) \ - (((pud_t *) pgd_page_vaddr(*(pgdp))) + \ - (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) - -#define pud_ERROR(e) \ - printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) - -#define remap_4k_pfn(vma, addr, pfn, prot) \ - remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) -#endif /* _ASM_POWERPC_PGTABLE_4K_H */ diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h deleted file mode 100644 index 07b0d8f09cb6..000000000000 --- a/include/asm-powerpc/pgtable-64k.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_64K_H -#define _ASM_POWERPC_PGTABLE_64K_H - -#include - - -#define PTE_INDEX_SIZE 12 -#define PMD_INDEX_SIZE 12 -#define PUD_INDEX_SIZE 0 -#define PGD_INDEX_SIZE 4 - -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(real_pte_t) << PTE_INDEX_SIZE) -#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) - -#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) -#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) -#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) - -#ifdef CONFIG_PPC_SUBPAGE_PROT -/* - * For the sub-page protection option, we extend the PGD with one of - * these. Basically we have a 3-level tree, with the top level being - * the protptrs array. To optimize speed and memory consumption when - * only addresses < 4GB are being protected, pointers to the first - * four pages of sub-page protection words are stored in the low_prot - * array. - * Each page of sub-page protection words protects 1GB (4 bytes - * protects 64k). For the 3-level tree, each page of pointers then - * protects 8TB. - */ -struct subpage_prot_table { - unsigned long maxaddr; /* only addresses < this are protected */ - unsigned int **protptrs[2]; - unsigned int *low_prot[4]; -}; - -#undef PGD_TABLE_SIZE -#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ - sizeof(struct subpage_prot_table)) - -#define SBP_L1_BITS (PAGE_SHIFT - 2) -#define SBP_L2_BITS (PAGE_SHIFT - 3) -#define SBP_L1_COUNT (1 << SBP_L1_BITS) -#define SBP_L2_COUNT (1 << SBP_L2_BITS) -#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) -#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) - -extern void subpage_prot_free(pgd_t *pgd); - -static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) -{ - return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); -} -#endif /* CONFIG_PPC_SUBPAGE_PROT */ -#endif /* __ASSEMBLY__ */ - -/* With 4k base page size, hugepage PTEs go at the PMD level */ -#define MIN_HUGEPTE_SHIFT PAGE_SHIFT - -/* PMD_SHIFT determines what a second-level page table entry can map */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define PGDIR_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* Additional PTE bits (don't change without checking asm in hash_low.S) */ -#define __HAVE_ARCH_PTE_SPECIAL -#define _PAGE_SPECIAL 0x00000400 /* software: special page */ -#define _PAGE_HPTE_SUB 0x0ffff000 /* combo only: sub pages HPTE bits */ -#define _PAGE_HPTE_SUB0 0x08000000 /* combo only: first sub page */ -#define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ -#define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ - -/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, - * we set that to be the whole sub-bits mask. The C code will only - * test this, so a multi-bit mask will work. For combo pages, this - * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of - * all the sub bits. For real 64k pages, we now have the assembly set - * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap - * that mask. This is fine as long as the HIDX bits are never set on - * a PTE that isn't hashed, which is the case today. - * - * A little nit is for the huge page C code, which does the hashing - * in C, we need to provide which bit to use. - */ -#define _PAGE_HASHPTE _PAGE_HPTE_SUB - -/* Note the full page bits must be in the same location as for normal - * 4k pages as the same asssembly will be used to insert 64K pages - * wether the kernel has CONFIG_PPC_64K_PAGES or not - */ -#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */ -#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ - -/* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) - -/* Shift to put page number into pte. - * - * That gives us a max RPN of 34 bits, which means a max of 50 bits - * of addressable physical space, or 46 bits for the special 4k PFNs. - */ -#define PTE_RPN_SHIFT (30) -#define PTE_RPN_MAX (1UL << (64 - PTE_RPN_SHIFT)) -#define PTE_RPN_MASK (~((1UL<> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf)) -#define __rpte_to_pte(r) ((r).pte) -#define __rpte_sub_valid(rpte, index) \ - (pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index))) - - -/* Trick: we set __end to va + 64k, which happens works for - * a 16M page as well as we want only one iteration - */ -#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ - do { \ - unsigned long __end = va + PAGE_SIZE; \ - unsigned __split = (psize == MMU_PAGE_4K || \ - psize == MMU_PAGE_64K_AP); \ - shift = mmu_psize_defs[psize].shift; \ - for (index = 0; va < __end; index++, va += (1L << shift)) { \ - if (!__split || __rpte_sub_valid(rpte, index)) do { \ - -#define pte_iterate_hashed_end() } while(0); } } while(0) - -#define pte_pagesize_index(mm, addr, pte) \ - (((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) - -#define remap_4k_pfn(vma, addr, pfn, prot) \ - remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ - __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) - -#endif /* _ASM_POWERPC_PGTABLE_64K_H */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h deleted file mode 100644 index 6fe39e327047..000000000000 --- a/include/asm-powerpc/pgtable-ppc32.h +++ /dev/null @@ -1,802 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_PPC32_H -#define _ASM_POWERPC_PGTABLE_PPC32_H - -#include - -#ifndef __ASSEMBLY__ -#include -#include -#include /* For sub-arch specific PPC_PIN_SIZE */ - -extern unsigned long va_to_phys(unsigned long address); -extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; - -#ifdef CONFIG_44x -extern int icache_44x_need_flush; -#endif - -#endif /* __ASSEMBLY__ */ - -/* - * The PowerPC MMU uses a hash table containing PTEs, together with - * a set of 16 segment registers (on 32-bit implementations), to define - * the virtual to physical address mapping. - * - * We use the hash table as an extended TLB, i.e. a cache of currently - * active mappings. We maintain a two-level page table tree, much - * like that used by the i386, for the sake of the Linux memory - * management code. Low-level assembler code in hashtable.S - * (procedure hash_page) is responsible for extracting ptes from the - * tree and putting them into the hash table when necessary, and - * updating the accessed and modified bits in the page table tree. - */ - -/* - * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. - * We also use the two level tables, but we can put the real bits in them - * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, - * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has - * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit - * based upon user/super access. The TLB does not have accessed nor write - * protect. We assume that if the TLB get loaded with an entry it is - * accessed, and overload the changed bit for write protect. We use - * two bits in the software pte that are supposed to be set to zero in - * the TLB entry (24 and 25) for these indicators. Although the level 1 - * descriptor contains the guarded and writethrough/copyback bits, we can - * set these at the page level since they get copied from the Mx_TWC - * register when the TLB entry is loaded. We will use bit 27 for guard, since - * that is where it exists in the MD_TWC, and bit 26 for writethrough. - * These will get masked from the level 2 descriptor at TLB load time, and - * copied to the MD_TWC before it gets loaded. - * Large page sizes added. We currently support two sizes, 4K and 8M. - * This also allows a TLB hander optimization because we can directly - * load the PMD into MD_TWC. The 8M pages are only used for kernel - * mapping of well known areas. The PMD (PGD) entries contain control - * flags in addition to the address, so care must be taken that the - * software no longer assumes these are only pointers. - */ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - */ - -/* - * The normal case is that PTEs are 32-bits and we have a 1-page - * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus - * - * For any >32-bit physical address platform, we can use the following - * two level page table layout where the pgdir is 8KB and the MS 13 bits - * are an index to the second level table. The combined pgdir/pmd first - * level has 2048 entries and the second level has 512 64-bit PTE entries. - * -Matt - */ -/* PGDIR_SHIFT determines what a top-level page table entry can map */ -#define PGDIR_SHIFT (PAGE_SHIFT + PTE_SHIFT) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: our page-table tree is two-level, so - * we don't really have any PMD directory. - */ -#ifndef __ASSEMBLY__ -#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_SHIFT) -#define PGD_TABLE_SIZE (sizeof(pgd_t) << (32 - PGDIR_SHIFT)) -#endif /* __ASSEMBLY__ */ - -#define PTRS_PER_PTE (1 << PTE_SHIFT) -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ - (unsigned long long)pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * We no longer map larger than phys RAM with the BATs so we don't have - * to worry about the VMALLOC_OFFSET causing problems. We do have to worry - * about clashes between our early calls to ioremap() that start growing down - * from ioremap_base being run into the VM area allocations (growing upwards - * from VMALLOC_START). For this reason we have ioremap_bot to check when - * we actually run into our mappings setup in the early boot with the VM - * system. This really does become a problem for machines with good amounts - * of RAM. -- Cort - */ -#define VMALLOC_OFFSET (0x1000000) /* 16M */ -#ifdef PPC_PIN_SIZE -#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#else -#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#endif -#define VMALLOC_END ioremap_bot - -/* - * Bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. - */ - -#if defined(CONFIG_40x) - -/* There are several potential gotchas here. The 40x hardware TLBLO - field looks like this: - - 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - RPN..................... 0 0 EX WR ZSEL....... W I M G - - Where possible we make the Linux PTE bits match up with this - - - bits 20 and 21 must be cleared, because we use 4k pages (40x can - support down to 1k pages), this is done in the TLBMiss exception - handler. - - We use only zones 0 (for kernel pages) and 1 (for user pages) - of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - miss handler. Bit 27 is PAGE_USER, thus selecting the correct - zone. - - PRESENT *must* be in the bottom two bits because swap cache - entries use the top 30 bits. Because 40x doesn't support SMP - anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - is cleared in the TLB miss handler before the TLB entry is loaded. - - All other bits of the PTE are loaded into TLBLO without - modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - software PTE bits. We actually use use bits 21, 24, 25, and - 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - PRESENT. -*/ - -/* Definitions for 40x embedded chips. */ -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_RW 0x040 /* software: Writes permitted */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_BAD 0x802 -#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) - -/* Until my rework is finished, 40x still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - -#elif defined(CONFIG_44x) -/* - * Definitions for PPC440 - * - * Because of the 3 word TLB entries to support 36-bit addressing, - * the attribute are difficult to map in such a fashion that they - * are easily loaded during exception processing. I decided to - * organize the entry so the ERPN is the only portion in the - * upper word of the PTE and the attribute bits below are packed - * in as sensibly as they can be in the area below a 4KB page size - * oriented RPN. This at least makes it easy to load the RPN and - * ERPN fields in the TLB. -Matt - * - * Note that these bits preclude future use of a page size - * less than 4KB. - * - * - * PPC 440 core has following TLB attribute fields; - * - * TLB1: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN................................. - - - - - - ERPN....... - * - * TLB2: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR - * - * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional - * TLB2 storage attibute fields. Those are: - * - * TLB2: - * 0...10 11 12 13 14 15 16...31 - * no change WL1 IL1I IL1D IL2I IL2D no change - * - * There are some constrains and options, to decide mapping software bits - * into TLB entry. - * - * - PRESENT *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - FILE *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it - * doesn't support SMP. So we can use this as software bit, like - * DIRTY. - * - * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used - * for memory protection related functions (see PTE structure in - * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the - * above bits. Note that the bit values are CPU specific, not architecture - * specific. - * - * The kernel PTE entry holds an arch-dependent swp_entry structure under - * certain situations. In other words, in such situations some portion of - * the PTE bits are used as a swp_entry. In the PPC implementation, the - * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still - * hold protection values. That means the three protection bits are - * reserved for both PTE and SWAP entry at the most significant three - * LSBs. - * - * There are three protection bits available for SWAP entry: - * _PAGE_PRESENT - * _PAGE_FILE - * _PAGE_HASHPTE (if HW has) - * - * So those three bits have to be inside of 0-2nd LSB of PTE. - * - */ - -#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ -#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ -#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_COHERENT 0x00000200 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ - -/* TODO: Add large page lowmem mapping support */ -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffff00000000ULL - - -#elif defined(CONFIG_FSL_BOOKE) -/* - MMU Assist Register 3: - - 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 - RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR - - - PRESENT *must* be in the bottom three bits because swap cache - entries use the top 29 bits. - - - FILE *must* be in the bottom three bits because swap cache - entries use the top 29 bits. -*/ - -/* Definitions for FSL Book-E Cores */ -#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ -#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ -#define _PAGE_FILE 0x00002 /* S: when !present: nonlinear file mapping */ -#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ -#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ -#define _PAGE_HWEXEC 0x00010 /* H: SX permission */ -#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ - -#define _PAGE_ENDIAN 0x00040 /* H: E bit */ -#define _PAGE_GUARDED 0x00080 /* H: G bit */ -#define _PAGE_COHERENT 0x00100 /* H: M bit */ -#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ - -#ifdef CONFIG_PTE_64BIT -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffffffff0000ULL -#endif - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -#elif defined(CONFIG_8xx) -/* Definitions for 8xx embedded chips. */ -#define _PAGE_PRESENT 0x0001 /* Page is valid */ -#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ -#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ -#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ - -/* These five software bits must be masked out when the entry is loaded - * into the TLB. - */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ -#define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ - -/* Setting any bits in the nibble with the follow two controls will - * require a TLB exception handler change. It is assumed unused bits - * are always zero. - */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ - -#define _PMD_PRESENT 0x0001 -#define _PMD_BAD 0x0ff0 -#define _PMD_PAGE_MASK 0x000c -#define _PMD_PAGE_8M 0x000c - -#define _PTE_NONE_MASK _PAGE_ACCESSED - -/* Until my rework is finished, 8xx still needs atomic PTE updates */ -#define PTE_ATOMIC_UPDATES 1 - -#else /* CONFIG_6xx */ -/* Definitions for 60x, 740/750, etc. */ -#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ -#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ -#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ -#define _PAGE_USER 0x004 /* usermode access allowed */ -#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ -#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x080 /* C: page changed */ -#define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ -#define _PAGE_RW 0x400 /* software: user write access allowed */ - -#define _PTE_NONE_MASK _PAGE_HASHPTE - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* Hash table based platforms need atomic updates of the linux PTE */ -#define PTE_ATOMIC_UPDATES 1 - -#endif - -/* - * Some bits are only used on some cpu families... - */ -#ifndef _PAGE_HASHPTE -#define _PAGE_HASHPTE 0 -#endif -#ifndef _PTE_NONE_MASK -#define _PTE_NONE_MASK 0 -#endif -#ifndef _PAGE_SHARED -#define _PAGE_SHARED 0 -#endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif -#ifndef _PAGE_EXEC -#define _PAGE_EXEC 0 -#endif -#ifndef _PAGE_ENDIAN -#define _PAGE_ENDIAN 0 -#endif -#ifndef _PAGE_COHERENT -#define _PAGE_COHERENT 0 -#endif -#ifndef _PAGE_WRITETHRU -#define _PAGE_WRITETHRU 0 -#endif -#ifndef _PMD_PRESENT_MASK -#define _PMD_PRESENT_MASK _PMD_PRESENT -#endif -#ifndef _PMD_SIZE -#define _PMD_SIZE 0 -#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - - -#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ - _PAGE_WRITETHRU | _PAGE_ENDIAN | \ - _PAGE_USER | _PAGE_ACCESSED | \ - _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ - _PAGE_EXEC | _PAGE_HWEXEC) -/* - * Note: the _PAGE_COHERENT bit automatically gets set in the hardware - * PTE if CONFIG_SMP is defined (hash_page does this); there is no need - * to have it in the Linux PTE, and in fact the bit could be reused for - * another purpose. -- paulus. - */ - -#ifdef CONFIG_44x -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) -#else -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) -#endif -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) -#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) - -#ifdef CONFIG_PPC_STD_MMU -/* On standard PPC MMU, no user access implies kernel read/write access, - * so to write-protect kernel memory we must turn on user access */ -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) -#else -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) -#endif - -#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) - -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ - defined(CONFIG_KPROBES) -/* We want the debuggers to be able to set breakpoints anywhere, so - * don't write protect the kernel text */ -#define _PAGE_RAM_TEXT _PAGE_RAM -#else -#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) -#endif - -#define PAGE_NONE __pgprot(_PAGE_BASE) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) - -#define PAGE_KERNEL __pgprot(_PAGE_RAM) -#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) - -/* - * The PowerPC can only do execute protection on a segment (256MB) basis, - * not on a page basis. So we consider execute permission the same as read. - * Also, write permissions imply read permissions. - * This is the closest we can get.. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_X -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY_X -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_X -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED_X -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED_X - -#ifndef __ASSEMBLY__ -/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a - * kernel without large page PMD support */ -extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); - -/* - * Conversions between PTE values and page frame numbers. - */ - -/* in some case we want to additionaly adjust where the pfn is in the pte to - * allow room for more flags */ -#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) -#define PFN_SHIFT_OFFSET (PAGE_SHIFT + 8) -#else -#define PFN_SHIFT_OFFSET (PAGE_SHIFT) -#endif - -#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ - pgprot_val(prot)) -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) -#endif /* __ASSEMBLY__ */ - -#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) -#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) -#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) -#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) - -#ifndef __ASSEMBLY__ -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } - -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - return pte; } -static inline unsigned long pte_pgprot(pte_t pte) -{ - return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; -} - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -/* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_pages(unsigned context, unsigned long va, - unsigned long pmdval, int count); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, - unsigned long pmdval); - -/* - * Atomic PTE updates. - * - * pte_update clears and sets bit atomically, and returns - * the old pte value. In the 64-bit PTE case we lock around the - * low PTE word since we expect ALL flag bits to be there - */ -#ifndef CONFIG_PTE_64BIT -static inline unsigned long pte_update(pte_t *p, - unsigned long clr, - unsigned long set) -{ -#ifdef PTE_ATOMIC_UPDATES - unsigned long old, tmp; - - __asm__ __volatile__("\ -1: lwarx %0,0,%3\n\ - andc %1,%0,%4\n\ - or %1,%1,%5\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" (clr), "r" (set), "m" (*p) - : "cc" ); -#else /* PTE_ATOMIC_UPDATES */ - unsigned long old = pte_val(*p); - *p = __pte((old & ~clr) | set); -#endif /* !PTE_ATOMIC_UPDATES */ - -#ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) - icache_44x_need_flush = 1; -#endif - return old; -} -#else /* CONFIG_PTE_64BIT */ -/* TODO: Change that to only modify the low word and move set_pte_at() - * out of line - */ -static inline unsigned long long pte_update(pte_t *p, - unsigned long clr, - unsigned long set) -{ -#ifdef PTE_ATOMIC_UPDATES - unsigned long long old; - unsigned long tmp; - - __asm__ __volatile__("\ -1: lwarx %L0,0,%4\n\ - lwzx %0,0,%3\n\ - andc %1,%L0,%5\n\ - or %1,%1,%6\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%4\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) - : "cc" ); -#else /* PTE_ATOMIC_UPDATES */ - unsigned long long old = pte_val(*p); - *p = __pte((old & ~(unsigned long long)clr) | set); -#endif /* !PTE_ATOMIC_UPDATES */ - -#ifdef CONFIG_44x - if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) - icache_44x_need_flush = 1; -#endif - return old; -} -#endif /* CONFIG_PTE_64BIT */ - -/* - * set_pte stores a linux PTE into the linux page table. - * On machines which use an MMU hash table we avoid changing the - * _PAGE_HASHPTE bit. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if _PAGE_HASHPTE != 0 - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); -#else - *ptep = pte; -#endif -} - -/* - * 2.6 calls this without flushing the TLB entry; this is wrong - * for our hash-based implementation, we fix that up here. - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) -{ - unsigned long old; - old = pte_update(ptep, _PAGE_ACCESSED, 0); -#if _PAGE_HASHPTE != 0 - if (old & _PAGE_HASHPTE) { - unsigned long ptephys = __pa(ptep) & PAGE_MASK; - flush_hash_pages(context, addr, ptephys, 1); - } -#endif - return (old & _PAGE_ACCESSED) != 0; -} -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ - __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); -} -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); - pte_update(ptep, 0, bits); -} - -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) - -/* - * Note that on Book E processors, the pmd contains the kernel virtual - * (lowmem) address of the pte page. The physical address is less useful - * because everything runs with translation enabled (even the TLB miss - * handler). On everything else the pmd contains the physical address - * of the pte page. -- paulus - */ -#ifndef CONFIG_BOOKE -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) -#else -#define pmd_page_vaddr(pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) -#endif - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* to find an entry in a page-table-directory */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) -#define pte_offset_map_nested(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) - -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) -#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) - -/* - * Encode and decode a swap entry. - * Note that the bits we use in a PTE for representing a swap entry - * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the - *_PAGE_HASHPTE bit (if used). -- paulus - */ -#define __swp_type(entry) ((entry).val & 0x1f) -#define __swp_offset(entry) ((entry).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, - pmd_t **pmdp); - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */ diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h deleted file mode 100644 index 74c6f380b805..000000000000 --- a/include/asm-powerpc/pgtable-ppc64.h +++ /dev/null @@ -1,468 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_ -#define _ASM_POWERPC_PGTABLE_PPC64_H_ -/* - * This file contains the functions and defines necessary to modify and use - * the ppc64 hashed page table. - */ - -#ifndef __ASSEMBLY__ -#include -#include -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_PPC_64K_PAGES -#include -#else -#include -#endif - -#define FIRST_USER_ADDRESS 0 - -/* - * Size of EA range mapped by our pagetables. - */ -#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ - PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) -#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) - -#if TASK_SIZE_USER64 > PGTABLE_RANGE -#error TASK_SIZE_USER64 exceeds pagetable range -#endif - -#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT)) -#error TASK_SIZE_USER64 exceeds user VSID range -#endif - - -/* - * Define the address range of the vmalloc VM area. - */ -#define VMALLOC_START ASM_CONST(0xD000000000000000) -#define VMALLOC_SIZE (PGTABLE_RANGE >> 1) -#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) - -/* - * Define the address ranges for MMIO and IO space : - * - * ISA_IO_BASE = VMALLOC_END, 64K reserved area - * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces - * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE - */ -#define FULL_IO_SIZE 0x80000000ul -#define ISA_IO_BASE (VMALLOC_END) -#define ISA_IO_END (VMALLOC_END + 0x10000ul) -#define PHB_IO_BASE (ISA_IO_END) -#define PHB_IO_END (VMALLOC_END + FULL_IO_SIZE) -#define IOREMAP_BASE (PHB_IO_END) -#define IOREMAP_END (VMALLOC_START + PGTABLE_RANGE) - -/* - * Region IDs - */ -#define REGION_SHIFT 60UL -#define REGION_MASK (0xfUL << REGION_SHIFT) -#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) - -#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) -#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) -#define VMEMMAP_REGION_ID (0xfUL) -#define USER_REGION_ID (0UL) - -/* - * Defines the address of the vmemap area, in its own region - */ -#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT) -#define vmemmap ((struct page *)VMEMMAP_BASE) - - -/* - * Common bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. Additional - * bits may be defined in pgtable-*.h - */ -#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ -#define _PAGE_USER 0x0002 /* matches one of the PP bits */ -#define _PAGE_FILE 0x0002 /* (!present only) software: pte holds file offset */ -#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ -#define _PAGE_GUARDED 0x0008 -#define _PAGE_COHERENT 0x0010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x0020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x0040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x0080 /* C: page changed */ -#define _PAGE_ACCESSED 0x0100 /* R: page referenced */ -#define _PAGE_RW 0x0200 /* software: user write access allowed */ -#define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ - -/* Strong Access Ordering */ -#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) - -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) - -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) - -/* __pgprot defined in asm-powerpc/page.h */ -#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) - -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_WRENABLE) -#define PAGE_KERNEL_CI __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ - _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC) - -#define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) -#define HAVE_PAGE_AGP - -#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \ - _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ - _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ - _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) -/* PTEIDX nibble */ -#define _PTEIDX_SECONDARY 0x8 -#define _PTEIDX_GROUP_IX 0x7 - - -/* - * POWER4 and newer have per page execute protection, older chips can only - * do this on a segment (256MB) basis. - * - * Also, write permissions imply read permissions. - * This is the closest we can get.. - * - * Note due to the way vm flags are laid out, the bits are XWR - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_X -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY_X -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_X -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED_X -#define __S111 PAGE_SHARED_X - -#ifdef CONFIG_HUGETLB_PAGE - -#define HAVE_ARCH_UNMAPPED_AREA -#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN - -#endif - -#ifndef __ASSEMBLY__ - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - * - * mk_pte takes a (struct page *) as input - */ -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) - -static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) -{ - pte_t pte; - - - pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot); - return pte; -} - -#define pte_modify(_pte, newprot) \ - (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))) - -#define pte_none(pte) ((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) - -/* pte_clear moved to later in this file */ - -#define pte_pfn(x) ((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT))) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define PMD_BAD_BITS (PTE_TABLE_SIZE-1) -#define PUD_BAD_BITS (PMD_TABLE_SIZE-1) - -#define pmd_set(pmdp, pmdval) (pmd_val(*(pmdp)) = (pmdval)) -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ - || (pmd_val(pmd) & PMD_BAD_BITS)) -#define pmd_present(pmd) (pmd_val(pmd) != 0) -#define pmd_clear(pmdp) (pmd_val(*(pmdp)) = 0) -#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) -#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd)) - -#define pud_set(pudp, pudval) (pud_val(*(pudp)) = (pudval)) -#define pud_none(pud) (!pud_val(pud)) -#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ - || (pud_val(pud) & PUD_BAD_BITS)) -#define pud_present(pud) (pud_val(pud) != 0) -#define pud_clear(pudp) (pud_val(*(pudp)) = 0) -#define pud_page_vaddr(pud) (pud_val(pud) & ~PUD_MASKED_BITS) -#define pud_page(pud) virt_to_page(pud_page_vaddr(pud)) - -#define pgd_set(pgdp, pudp) ({pgd_val(*(pgdp)) = (unsigned long)(pudp);}) - -/* - * Find an entry in a page-table-directory. We combine the address region - * (the high order N bits) and the pgd portion of the address. - */ -/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */ -#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff) - -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -#define pmd_offset(pudp,addr) \ - (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) - -#define pte_offset_kernel(dir,addr) \ - (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))) - -#define pte_offset_map(dir,addr) pte_offset_kernel((dir), (addr)) -#define pte_offset_map_nested(dir,addr) pte_offset_kernel((dir), (addr)) -#define pte_unmap(pte) do { } while(0) -#define pte_unmap_nested(pte) do { } while(0) - -/* to find an entry in a kernel page-table-directory */ -/* This now only contains the vmalloc pages */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;} -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;} -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;} -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;} -static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { - return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - pte_val(pte) |= _PAGE_SPECIAL; return pte; } -static inline unsigned long pte_pgprot(pte_t pte) -{ - return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; -} - -/* Atomic PTE updates */ -static inline unsigned long pte_update(struct mm_struct *mm, - unsigned long addr, - pte_t *ptep, unsigned long clr, - int huge) -{ - unsigned long old, tmp; - - __asm__ __volatile__( - "1: ldarx %0,0,%3 # pte_update\n\ - andi. %1,%0,%6\n\ - bne- 1b \n\ - andc %1,%0,%4 \n\ - stdcx. %1,0,%3 \n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*ptep) - : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) - : "cc" ); - - if (old & _PAGE_HASHPTE) - hpte_need_flush(mm, addr, ptep, old, huge); - return old; -} - -static inline int __ptep_test_and_clear_young(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0) - return 0; - old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0); - return (old & _PAGE_ACCESSED) != 0; -} -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ -({ \ - int __r; \ - __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ - __r; \ -}) - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & _PAGE_RW) == 0) - return; - old = pte_update(mm, addr, ptep, _PAGE_RW, 0); -} - -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old; - - if ((pte_val(*ptep) & _PAGE_RW) == 0) - return; - old = pte_update(mm, addr, ptep, _PAGE_RW, 1); -} - -/* - * We currently remove entries from the hashtable regardless of whether - * the entry was young or dirty. The generic routines only flush if the - * entry was young or dirty which is not good enough. - * - * We should be more intelligent about this but for the moment we override - * these functions and force a tlb flush unconditionally - */ -#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH -#define ptep_clear_flush_young(__vma, __address, __ptep) \ -({ \ - int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \ - __ptep); \ - __young; \ -}) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0); - return __pte(old); -} - -static inline void pte_clear(struct mm_struct *mm, unsigned long addr, - pte_t * ptep) -{ - pte_update(mm, addr, ptep, ~0UL, 0); -} - -/* - * set_pte stores a linux PTE into the linux page table. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - if (pte_present(*ptep)) - pte_clear(mm, addr, ptep); - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - *ptep = pte; -} - -/* Set the dirty and/or accessed bits atomically in a linux PTE, this - * function doesn't need to flush the hash entry - */ -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); - unsigned long old, tmp; - - __asm__ __volatile__( - "1: ldarx %0,0,%4\n\ - andi. %1,%0,%6\n\ - bne- 1b \n\ - or %0,%3,%0\n\ - stdcx. %0,0,%4\n\ - bne- 1b" - :"=&r" (old), "=&r" (tmp), "=m" (*ptep) - :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) - :"cc"); -} -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* Encode and de-code a swap entry */ -#define __swp_type(entry) (((entry).val >> 1) & 0x3f) -#define __swp_offset(entry) ((entry).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)}) -#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT}) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT }) -#define pte_to_pgoff(pte) (pte_val(pte) >> PTE_RPN_SHIFT) -#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE}) -#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) - -void pgtable_cache_init(void); - -/* - * find_linux_pte returns the address of a linux pte for a given - * effective address and directory. If not found, it returns zero. - */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea) -{ - pgd_t *pg; - pud_t *pu; - pmd_t *pm; - pte_t *pt = NULL; - - pg = pgdir + pgd_index(ea); - if (!pgd_none(*pg)) { - pu = pud_offset(pg, ea); - if (!pud_none(*pu)) { - pm = pmd_offset(pu, ea); - if (pmd_present(*pm)) - pt = pte_offset_kernel(pm, ea); - } - } - return pt; -} - -pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/include/asm-powerpc/pgtable.h b/include/asm-powerpc/pgtable.h deleted file mode 100644 index dbb8ca172e44..000000000000 --- a/include/asm-powerpc/pgtable.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _ASM_POWERPC_PGTABLE_H -#define _ASM_POWERPC_PGTABLE_H -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include /* For TASK_SIZE */ -#include -#include -struct mm_struct; -#endif /* !__ASSEMBLY__ */ - -#if defined(CONFIG_PPC64) -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -extern pgd_t swapper_pg_dir[]; - -extern void paging_init(void); - -/* - * kern_addr_valid is intended to indicate whether an address is a valid - * kernel address. Most 32-bit archs define it as always true (like this) - * but most 64-bit archs actually perform a test. What should we do here? - */ -#define kern_addr_valid(addr) (1) - -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) - -#include - - -/* - * This gets called at the end of handling a page fault, when - * the kernel has put a new PTE into the page table for the process. - * We use it to ensure coherency between the i-cache and d-cache - * for the page which has just been mapped in. - * On machines which use an MMU hash table, we use this to put a - * corresponding HPTE into the hash table ahead of time, instead of - * waiting for the inevitable extra hash-table miss exception. - */ -extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/include/asm-powerpc/phyp_dump.h b/include/asm-powerpc/phyp_dump.h deleted file mode 100644 index fa74c6c3e106..000000000000 --- a/include/asm-powerpc/phyp_dump.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Hypervisor-assisted dump - * - * Linas Vepstas, Manish Ahuja 2008 - * Copyright 2008 IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PPC64_PHYP_DUMP_H -#define _PPC64_PHYP_DUMP_H - -#ifdef CONFIG_PHYP_DUMP - -/* The RMR region will be saved for later dumping - * whenever the kernel crashes. Set this to 256MB. */ -#define PHYP_DUMP_RMR_START 0x0 -#define PHYP_DUMP_RMR_END (1UL<<28) - -struct phyp_dump { - /* Memory that is reserved during very early boot. */ - unsigned long init_reserve_start; - unsigned long init_reserve_size; - /* cmd line options during boot */ - unsigned long reserve_bootvar; - unsigned long phyp_dump_at_boot; - /* Check status during boot if dump supported, active & present*/ - unsigned long phyp_dump_configured; - unsigned long phyp_dump_is_active; - /* store cpu & hpte size */ - unsigned long cpu_state_size; - unsigned long hpte_region_size; - /* previous scratch area values */ - unsigned long reserved_scratch_addr; - unsigned long reserved_scratch_size; -}; - -extern struct phyp_dump *phyp_dump_info; - -int early_init_dt_scan_phyp_dump(unsigned long node, - const char *uname, int depth, void *data); - -#endif /* CONFIG_PHYP_DUMP */ -#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h deleted file mode 100644 index 877c35a4356e..000000000000 --- a/include/asm-powerpc/pmac_feature.h +++ /dev/null @@ -1,405 +0,0 @@ -/* - * Definition of platform feature hooks for PowerMacs - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Paul Mackerras & - * Ben. Herrenschmidt. - * - * - * Note: I removed media-bay details from the feature stuff, I believe it's - * not worth it, the media-bay driver can directly use the mac-io - * ASIC registers. - * - * Implementation note: Currently, none of these functions will block. - * However, they may internally protect themselves with a spinlock - * for way too long. Be prepared for at least some of these to block - * in the future. - * - * Unless specifically defined, the result code is assumed to be an - * error when negative, 0 is the default success result. Some functions - * may return additional positive result values. - * - * To keep implementation simple, all feature calls are assumed to have - * the prototype parameters (struct device_node* node, int value). - * When either is not used, pass 0. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_PMAC_FEATURE_H -#define __ASM_POWERPC_PMAC_FEATURE_H - -#include -#include - -/* - * Known Mac motherboard models - * - * Please, report any error here to benh@kernel.crashing.org, thanks ! - * - * Note that I don't fully maintain this list for Core99 & MacRISC2 - * and I'm considering removing all NewWorld entries from it and - * entirely rely on the model string. - */ - -/* PowerSurge are the first generation of PCI Pmacs. This include - * all of the Grand-Central based machines. We currently don't - * differenciate most of them. - */ -#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ -#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ - -/* Here is the infamous serie of OHare based machines - */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ -#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ -#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ -#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ -#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ - -/* Here are the Heathrow based machines - * FIXME: Differenciate wallstreet,mainstreet,wallstreetII - */ -#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ -#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ -#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ -#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ - -/* Here are newworld machines based on Paddington (heathrow derivative) - */ -#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ -#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ -#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ -#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ -#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ - -/* Core99 machines based on UniNorth 1.0 and 1.5 - * - * Note: A single entry here may cover several actual models according - * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most - * FireWire based iMacs, etc...). Those machines are too similar to be - * distinguished here, when they need to be differencied, use the - * device-tree "model" or "compatible" property. - */ -#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ -#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ -#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ -#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ -#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ -#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ -#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ -#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ -#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ -#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ -#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ -#define PMAC_TYPE_EMAC 0x50 /* eMac */ -#define PMAC_TYPE_UNKNOWN_CORE99 0x5f - -/* MacRisc2 with UniNorth 2.0 */ -#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ -#define PMAC_TYPE_WINDTUNNEL 0x81 - -/* MacRISC2 machines based on the Pangea chipset - */ -#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ -#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ -#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ -#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f - -/* MacRISC2 machines based on the Intrepid chipset - */ -#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ - -/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, - * but rather machine families - */ -#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ -#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ -#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ -#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ -#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ -#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ - -/* - * Motherboard flags - */ - -#define PMAC_MB_CAN_SLEEP 0x00000001 -#define PMAC_MB_HAS_FW_POWER 0x00000002 -#define PMAC_MB_OLD_CORE99 0x00000004 -#define PMAC_MB_MOBILE 0x00000008 -#define PMAC_MB_MAY_SLEEP 0x00000010 - -/* - * Feature calls supported on pmac - * - */ - -/* - * Use this inline wrapper - */ -struct device_node; - -static inline long pmac_call_feature(int selector, struct device_node* node, - long param, long value) -{ - if (!ppc_md.feature_call || !machine_is(powermac)) - return -ENODEV; - return ppc_md.feature_call(selector, node, param, value); -} - -/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) - * enable/disable an SCC side. Pass the node corresponding to the - * channel side as a parameter. - * param is the type of port - * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled - * for use by xmon. - */ -#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) - #define PMAC_SCC_ASYNC 0 - #define PMAC_SCC_IRDA 1 - #define PMAC_SCC_I2S1 2 - #define PMAC_SCC_FLAG_XMON 0x00001000 - -/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) - * enable/disable the internal modem. - */ -#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) - -/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) - * enable/disable the swim3 (floppy) cell of a mac-io ASIC - */ -#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) - -/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) - * enable/disable the mesh (scsi) cell of a mac-io ASIC - */ -#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) - -/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) - * enable/disable an IDE port of a mac-io ASIC - * pass the busID parameter - */ -#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) - -/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) - * assert(1)/release(0) an IDE reset line (mac-io IDE only) - */ -#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) - -/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive - * it's reset line - */ -#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) - -/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This - * control the cell's clock. - */ -#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) - -/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) - * Perform a HW reset of the PHY connected to a gmac controller. - * Pass the gmac device node, not the PHY node. - */ -#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) - -/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) - * enable/disable the sound chip, whatever it is and provided it can - * acually be controlled - */ -#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) - -/* -- add various tweaks related to sound routing -- */ - -/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) - * enable/disable the airport card - */ -#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) - -/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) - * toggle the reset line of a CPU on an uninorth-based SMP machine - */ -#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) - -/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) - * enable/disable an USB cell, along with the power of the USB "pad" - * on keylargo based machines - */ -#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) - -/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) - * enable/disable the firewire cell of an uninorth ASIC. - */ -#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) - -/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) - * enable/disable the firewire cable power supply of the uninorth - * firewire cell - */ -#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) - -/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) - * set the sleep state of the motherboard. - * - * Pass -1 as value to query for sleep capability - * Pass 1 to set IOs to sleep - * Pass 0 to set IOs to wake - */ -#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) - -/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) - * - * returns some motherboard infos. - * selector: 0 - model id - * 1 - model flags (capabilities) - * 2 - model name (cast to const char *) - */ -#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) -#define PMAC_MB_INFO_MODEL 0 -#define PMAC_MB_INFO_FLAGS 1 -#define PMAC_MB_INFO_NAME 2 - -/* PMAC_FTR_READ_GPIO (NULL, int index, 0) - * - * read a GPIO from a mac-io controller of type KeyLargo or Pangea. - * the value returned is a byte (positive), or a negative error code - */ -#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) - -/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) - * - * write a GPIO of a mac-io controller of type KeyLargo or Pangea. - */ -#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) - -/* PMAC_FTR_ENABLE_MPIC - * - * Enable the MPIC cell - */ -#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) - -/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) - * - * Enable/disable the AACK delay on the northbridge for systems using DFS - */ -#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) - -/* PMAC_FTR_DEVICE_CAN_WAKE - * - * Used by video drivers to inform system that they can actually perform - * wakeup from sleep - */ -#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) - - -/* Don't use those directly, they are for the sake of pmac_setup.c */ -extern long pmac_do_feature_call(unsigned int selector, ...); -extern void pmac_feature_init(void); - -/* Video suspend tweak */ -extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); -extern void pmac_call_early_video_resume(void); - -#define PMAC_FTR_DEF(x) ((0x6660000) | (x)) - -/* The AGP driver registers itself here */ -extern void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)); - -/* Those are meant to be used by video drivers to deal with AGP - * suspend resume properly - */ -extern void pmac_suspend_agp_for_card(struct pci_dev *dev); -extern void pmac_resume_agp_for_card(struct pci_dev *dev); - -/* - * The part below is for use by macio_asic.c only, do not rely - * on the data structures or constants below in a normal driver - * - */ - -#define MAX_MACIO_CHIPS 2 - -enum { - macio_unknown = 0, - macio_grand_central, - macio_ohare, - macio_ohareII, - macio_heathrow, - macio_gatwick, - macio_paddington, - macio_keylargo, - macio_pangea, - macio_intrepid, - macio_keylargo2, - macio_shasta, -}; - -struct macio_chip -{ - struct device_node *of_node; - int type; - const char *name; - int rev; - volatile u32 __iomem *base; - unsigned long flags; - - /* For use by macio_asic PCI driver */ - struct macio_bus lbus; -}; - -extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; - -#define MACIO_FLAG_SCCA_ON 0x00000001 -#define MACIO_FLAG_SCCB_ON 0x00000002 -#define MACIO_FLAG_SCC_LOCKED 0x00000004 -#define MACIO_FLAG_AIRPORT_ON 0x00000010 -#define MACIO_FLAG_FW_SUPPORTED 0x00000020 - -extern struct macio_chip* macio_find(struct device_node* child, int type); - -#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) -#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) - -#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) -#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) -#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) -#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) -#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) -#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) - -/* - * Those are exported by pmac feature for internal use by arch code - * only like the platform function callbacks, do not use directly in drivers - */ -extern spinlock_t feature_lock; -extern struct device_node *uninorth_node; -extern u32 __iomem *uninorth_base; - -/* - * Uninorth reg. access. Note that Uni-N regs are big endian - */ - -#define UN_REG(r) (uninorth_base + ((r) >> 2)) -#define UN_IN(r) (in_be32(UN_REG(r))) -#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) -#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) -#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) - -/* Uninorth variant: - * - * 0 = not uninorth - * 1 = U1.x or U2.x - * 3 = U3 - * 4 = U4 - */ -extern int pmac_get_uninorth_variant(void); - -#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h deleted file mode 100644 index 131011bd7e76..000000000000 --- a/include/asm-powerpc/pmac_low_i2c.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * include/asm-ppc/pmac_low_i2c.h - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef __PMAC_LOW_I2C_H__ -#define __PMAC_LOW_I2C_H__ -#ifdef __KERNEL__ - -/* i2c mode (based on the platform functions format) */ -enum { - pmac_i2c_mode_dumb = 1, - pmac_i2c_mode_std = 2, - pmac_i2c_mode_stdsub = 3, - pmac_i2c_mode_combined = 4, -}; - -/* RW bit in address */ -enum { - pmac_i2c_read = 0x01, - pmac_i2c_write = 0x00 -}; - -/* i2c bus type */ -enum { - pmac_i2c_bus_keywest = 0, - pmac_i2c_bus_pmu = 1, - pmac_i2c_bus_smu = 2, -}; - -/* i2c bus features */ -enum { - /* can_largesub : supports >1 byte subaddresses (SMU only) */ - pmac_i2c_can_largesub = 0x00000001u, - - /* multibus : device node holds multiple busses, bus number is - * encoded in bits 0xff00 of "reg" of a given device - */ - pmac_i2c_multibus = 0x00000002u, -}; - -/* i2c busses in the system */ -struct pmac_i2c_bus; -struct i2c_adapter; - -/* Init, called early during boot */ -extern int pmac_i2c_init(void); - -/* Lookup an i2c bus for a device-node. The node can be either the bus - * node itself or a device below it. In the case of a multibus, the bus - * node itself is the controller node, else, it's a child of the controller - * node - */ -extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); - -/* Get the address for an i2c device. This strips the bus number if - * necessary. The 7 bits address is returned 1 bit right shifted so that the - * direction can be directly ored in - */ -extern u8 pmac_i2c_get_dev_addr(struct device_node *device); - -/* Get infos about a bus */ -extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); -extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); -extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus); - -/* i2c layer adapter attach/detach */ -extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter); -extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus, - struct i2c_adapter *adapter); -extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); -extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter); - -/* March a device or bus with an i2c adapter structure, to be used by drivers - * to match device-tree nodes with i2c adapters during adapter discovery - * callbacks - */ -extern int pmac_i2c_match_adapter(struct device_node *dev, - struct i2c_adapter *adapter); - - -/* (legacy) Locking functions exposed to i2c-keywest */ -extern int pmac_low_i2c_lock(struct device_node *np); -extern int pmac_low_i2c_unlock(struct device_node *np); - -/* Access functions for platform code */ -extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); -extern void pmac_i2c_close(struct pmac_i2c_bus *bus); -extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); -extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, - u32 subaddr, u8 *data, int len); - -/* Suspend/resume code called by via-pmu directly for now */ -extern void pmac_pfunc_i2c_suspend(void); -extern void pmac_pfunc_i2c_resume(void); - -#endif /* __KERNEL__ */ -#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/include/asm-powerpc/pmac_pfunc.h b/include/asm-powerpc/pmac_pfunc.h deleted file mode 100644 index 1330d6a58c57..000000000000 --- a/include/asm-powerpc/pmac_pfunc.h +++ /dev/null @@ -1,252 +0,0 @@ -#ifndef __PMAC_PFUNC_H__ -#define __PMAC_PFUNC_H__ - -#include -#include - -/* Flags in command lists */ -#define PMF_FLAGS_ON_INIT 0x80000000u -#define PMF_FLGAS_ON_TERM 0x40000000u -#define PMF_FLAGS_ON_SLEEP 0x20000000u -#define PMF_FLAGS_ON_WAKE 0x10000000u -#define PMF_FLAGS_ON_DEMAND 0x08000000u -#define PMF_FLAGS_INT_GEN 0x04000000u -#define PMF_FLAGS_HIGH_SPEED 0x02000000u -#define PMF_FLAGS_LOW_SPEED 0x01000000u -#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u - -/* - * Arguments to a platform function call. - * - * NOTE: By convention, pointer arguments point to an u32 - */ -struct pmf_args { - union { - u32 v; - u32 *p; - } u[4]; - unsigned int count; -}; - -/* - * A driver capable of interpreting commands provides a handlers - * structure filled with whatever handlers are implemented by this - * driver. Non implemented handlers are left NULL. - * - * PMF_STD_ARGS are the same arguments that are passed to the parser - * and that gets passed back to the various handlers. - * - * Interpreting a given function always start with a begin() call which - * returns an instance data to be passed around subsequent calls, and - * ends with an end() call. This allows the low level driver to implement - * locking policy or per-function instance data. - * - * For interrupt capable functions, irq_enable() is called when a client - * registers, and irq_disable() is called when the last client unregisters - * Note that irq_enable & irq_disable are called within a semaphore held - * by the core, thus you should not try to register yourself to some other - * pmf interrupt during those calls. - */ - -#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ - struct pmf_args *args - -struct pmf_function; - -struct pmf_handlers { - void * (*begin)(struct pmf_function *func, struct pmf_args *args); - void (*end)(struct pmf_function *func, void *instdata); - - int (*irq_enable)(struct pmf_function *func); - int (*irq_disable)(struct pmf_function *func); - - int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); - int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); - - int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); - int (*read_reg32)(PMF_STD_ARGS, u32 offset); - int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); - int (*read_reg16)(PMF_STD_ARGS, u32 offset); - int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); - int (*read_reg8)(PMF_STD_ARGS, u32 offset); - - int (*delay)(PMF_STD_ARGS, u32 duration); - - int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); - int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); - int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); - - int (*read_i2c)(PMF_STD_ARGS, u32 len); - int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); - int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, - const u8 *maskdata, const u8 *valuedata); - - int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); - int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); - int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, - u32 totallen, const u8 *maskdata, const u8 *valuedata); - - int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); - int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); - int (*set_i2c_mode)(PMF_STD_ARGS, int mode); - int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, - u32 totallen, const u8 *maskdata, - const u8 *valuedata); - - int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, - u32 xor); - - int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); - - int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, - const u8 *valuedata); - - struct module *owner; -}; - - -/* - * Drivers who expose platform functions register at init time, this - * causes the platform functions for that device node to be parsed in - * advance and associated with the device. The data structures are - * partially public so a driver can walk the list of platform functions - * and eventually inspect the flags - */ -struct pmf_device; - -struct pmf_function { - /* All functions for a given driver are linked */ - struct list_head link; - - /* Function node & driver data */ - struct device_node *node; - void *driver_data; - - /* For internal use by core */ - struct pmf_device *dev; - - /* The name is the "xxx" in "platform-do-xxx", this is how - * platform functions are identified by this code. Some functions - * only operate for a given target, in which case the phandle is - * here (or 0 if the filter doesn't apply) - */ - const char *name; - u32 phandle; - - /* The flags for that function. You can have several functions - * with the same name and different flag - */ - u32 flags; - - /* The actual tokenized function blob */ - const void *data; - unsigned int length; - - /* Interrupt clients */ - struct list_head irq_clients; - - /* Refcounting */ - struct kref ref; -}; - -/* - * For platform functions that are interrupts, one can register - * irq_client structures. You canNOT use the same structure twice - * as it contains a link member. Also, the callback is called with - * a spinlock held, you must not call back into any of the pmf_* functions - * from within that callback - */ -struct pmf_irq_client { - void (*handler)(void *data); - void *data; - struct module *owner; - struct list_head link; - struct pmf_function *func; -}; - - -/* - * Register/Unregister a function-capable driver and its handlers - */ -extern int pmf_register_driver(struct device_node *np, - struct pmf_handlers *handlers, - void *driverdata); - -extern void pmf_unregister_driver(struct device_node *np); - - -/* - * Register/Unregister interrupt clients - */ -extern int pmf_register_irq_client(struct device_node *np, - const char *name, - struct pmf_irq_client *client); - -extern void pmf_unregister_irq_client(struct pmf_irq_client *client); - -/* - * Called by the handlers when an irq happens - */ -extern void pmf_do_irq(struct pmf_function *func); - - -/* - * Low level call to platform functions. - * - * The phandle can filter on the target object for functions that have - * multiple targets, the flags allow you to restrict the call to a given - * combination of flags. - * - * The args array contains as many arguments as is required by the function, - * this is dependent on the function you are calling, unfortunately Apple - * mechanism provides no way to encode that so you have to get it right at - * the call site. Some functions require no args, in which case, you can - * pass NULL. - * - * You can also pass NULL to the name. This will match any function that has - * the appropriate combination of flags & phandle or you can pass 0 to the - * phandle to match any - */ -extern int pmf_do_functions(struct device_node *np, const char *name, - u32 phandle, u32 flags, struct pmf_args *args); - - - -/* - * High level call to a platform function. - * - * This one looks for the platform-xxx first so you should call it to the - * actual target if any. It will fallback to platform-do-xxx if it can't - * find one. It will also exclusively target functions that have - * the "OnDemand" flag. - */ - -extern int pmf_call_function(struct device_node *target, const char *name, - struct pmf_args *args); - - -/* - * For low latency interrupt usage, you can lookup for on-demand functions - * using the functions below - */ - -extern struct pmf_function *pmf_find_function(struct device_node *target, - const char *name); - -extern struct pmf_function * pmf_get_function(struct pmf_function *func); -extern void pmf_put_function(struct pmf_function *func); - -extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); - - -/* Suspend/resume code called by via-pmu directly for now */ -extern void pmac_pfunc_base_suspend(void); -extern void pmac_pfunc_base_resume(void); - -#endif /* __PMAC_PFUNC_H__ */ diff --git a/include/asm-powerpc/pmc.h b/include/asm-powerpc/pmc.h deleted file mode 100644 index d6a616a1b3ea..000000000000 --- a/include/asm-powerpc/pmc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * pmc.h - * Copyright (C) 2004 David Gibson, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _POWERPC_PMC_H -#define _POWERPC_PMC_H -#ifdef __KERNEL__ - -#include - -typedef void (*perf_irq_t)(struct pt_regs *); -extern perf_irq_t perf_irq; - -int reserve_pmc_hardware(perf_irq_t new_perf_irq); -void release_pmc_hardware(void); - -#ifdef CONFIG_PPC64 -void power4_enable_pmcs(void); -void pasemi_enable_pmcs(void); -#endif - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PMC_H */ diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h deleted file mode 100644 index b4e91fbf5081..000000000000 --- a/include/asm-powerpc/pmi.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _POWERPC_PMI_H -#define _POWERPC_PMI_H - -/* - * Definitions for talking with PMI device on PowerPC - * - * PMI (Platform Management Interrupt) is a way to communicate - * with the BMC (Baseboard Management Controller) via interrupts. - * Unlike IPMI it is bidirectional and has a low latency. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * Author: Christian Krafft - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef __KERNEL__ - -#define PMI_TYPE_FREQ_CHANGE 0x01 -#define PMI_TYPE_POWER_BUTTON 0x02 -#define PMI_READ_TYPE 0 -#define PMI_READ_DATA0 1 -#define PMI_READ_DATA1 2 -#define PMI_READ_DATA2 3 -#define PMI_WRITE_TYPE 4 -#define PMI_WRITE_DATA0 5 -#define PMI_WRITE_DATA1 6 -#define PMI_WRITE_DATA2 7 - -#define PMI_ACK 0x80 - -#define PMI_TIMEOUT 100 - -typedef struct { - u8 type; - u8 data0; - u8 data1; - u8 data2; -} pmi_message_t; - -struct pmi_handler { - struct list_head node; - u8 type; - void (*handle_pmi_message) (pmi_message_t); -}; - -int pmi_register_handler(struct pmi_handler *); -void pmi_unregister_handler(struct pmi_handler *); - -int pmi_send_message(pmi_message_t); - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PMI_H */ diff --git a/include/asm-powerpc/poll.h b/include/asm-powerpc/poll.h deleted file mode 100644 index c98509d3149e..000000000000 --- a/include/asm-powerpc/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/posix_types.h b/include/asm-powerpc/posix_types.h deleted file mode 100644 index c4e396b540df..000000000000 --- a/include/asm-powerpc/posix_types.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef _ASM_POWERPC_POSIX_TYPES_H -#define _ASM_POWERPC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned long __kernel_ino_t; -typedef unsigned int __kernel_mode_t; -typedef long __kernel_off_t; -typedef int __kernel_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef long __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef long __kernel_suseconds_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; -typedef unsigned int __kernel_old_uid_t; -typedef unsigned int __kernel_old_gid_t; - -#ifdef __powerpc64__ -typedef unsigned long __kernel_nlink_t; -typedef int __kernel_ipc_pid_t; -typedef unsigned long __kernel_size_t; -typedef long __kernel_ssize_t; -typedef unsigned long __kernel_old_dev_t; -#else -typedef unsigned short __kernel_nlink_t; -typedef short __kernel_ipc_pid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef unsigned int __kernel_old_dev_t; -#endif - -#ifdef __powerpc64__ -typedef long long __kernel_loff_t; -#else -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#ifndef __GNUC__ - -#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) -#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) -#define __FD_ISSET(d, set) (((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0) -#define __FD_ZERO(set) \ - ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set))) - -#else /* __GNUC__ */ - -#if defined(__KERNEL__) -/* With GNU C, use inline functions instead so args are evaluated only once: */ - -#undef __FD_SET -static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant case (8 ints, - * for a 256-bit fd_set) - */ -#undef __FD_ZERO -static __inline__ void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned long *tmp = (unsigned long *)p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 16: - tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; - tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; - - case 8: - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - - case 4: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -#endif /* defined(__KERNEL__) */ -#endif /* __GNUC__ */ -#endif /* _ASM_POWERPC_POSIX_TYPES_H */ diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h deleted file mode 100644 index 854ab713f56c..000000000000 --- a/include/asm-powerpc/ppc-pci.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_PPC_PCI_H -#define _ASM_POWERPC_PPC_PCI_H -#ifdef __KERNEL__ - -#ifdef CONFIG_PCI - -#include -#include - -extern unsigned long isa_io_base; - -extern void pci_setup_phb_io(struct pci_controller *hose, int primary); -extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); - - -extern struct list_head hose_list; - -extern void find_and_init_phbs(void); - -extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ - -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* PCI device_node operations */ -struct device_node; -typedef void *(*traverse_func)(struct device_node *me, void *data); -void *traverse_pci_devices(struct device_node *start, traverse_func pre, - void *data); - -extern void pci_devs_phb_init(void); -extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); -extern void scan_phb(struct pci_controller *hose); - -/* From rtas_pci.h */ -extern void init_pci_config_tokens (void); -extern unsigned long get_phb_buid (struct device_node *); -extern int rtas_setup_phb(struct pci_controller *phb); - -extern unsigned long pci_probe_only; - -/* ---- EEH internal-use-only related routines ---- */ -#ifdef CONFIG_EEH - -void pci_addr_cache_insert_device(struct pci_dev *dev); -void pci_addr_cache_remove_device(struct pci_dev *dev); -void pci_addr_cache_build(void); -struct pci_dev *pci_get_device_by_addr(unsigned long addr); - -/** - * eeh_slot_error_detail -- record and EEH error condition to the log - * @pdn: pci device node - * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE - * - * Obtains the EEH error details from the RTAS subsystem, - * and then logs these details with the RTAS error log system. - */ -#define EEH_LOG_TEMP_FAILURE 1 -#define EEH_LOG_PERM_FAILURE 2 -void eeh_slot_error_detail (struct pci_dn *pdn, int severity); - -/** - * rtas_pci_enable - enable IO transfers for this slot - * @pdn: pci device node - * @function: either EEH_THAW_MMIO or EEH_THAW_DMA - * - * Enable I/O transfers to this slot - */ -#define EEH_THAW_MMIO 2 -#define EEH_THAW_DMA 3 -int rtas_pci_enable(struct pci_dn *pdn, int function); - -/** - * rtas_set_slot_reset -- unfreeze a frozen slot - * @pdn: pci device node - * - * Clear the EEH-frozen condition on a slot. This routine - * does this by asserting the PCI #RST line for 1/8th of - * a second; this routine will sleep while the adapter is - * being reset. - * - * Returns a non-zero value if the reset failed. - */ -int rtas_set_slot_reset (struct pci_dn *); -int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); - -/** - * eeh_restore_bars - Restore device configuration info. - * @pdn: pci device node - * - * A reset of a PCI device will clear out its config space. - * This routines will restore the config space for this - * device, and is children, to values previously obtained - * from the firmware. - */ -void eeh_restore_bars(struct pci_dn *); - -/** - * rtas_configure_bridge -- firmware initialization of pci bridge - * @pdn: pci device node - * - * Ask the firmware to configure all PCI bridges devices - * located behind the indicated node. Required after a - * pci device reset. Does essentially the same hing as - * eeh_restore_bars, but for brdges, and lets firmware - * do the work. - */ -void rtas_configure_bridge(struct pci_dn *); - -int rtas_write_config(struct pci_dn *, int where, int size, u32 val); -int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); - -/** - * eeh_mark_slot -- set mode flags for pertition endpoint - * @pdn: pci device node - * - * mark and clear slots: find "partition endpoint" PE and set or - * clear the flags for each subnode of the PE. - */ -void eeh_mark_slot (struct device_node *dn, int mode_flag); -void eeh_clear_slot (struct device_node *dn, int mode_flag); - -/** - * find_device_pe -- Find the associated "Partiationable Endpoint" PE - * @pdn: pci device node - */ -struct device_node * find_device_pe(struct device_node *dn); - -void eeh_sysfs_add_device(struct pci_dev *pdev); -void eeh_sysfs_remove_device(struct pci_dev *pdev); - -#endif /* CONFIG_EEH */ - -#else /* CONFIG_PCI */ -static inline void find_and_init_phbs(void) { } -static inline void init_pci_config_tokens(void) { } -#endif /* !CONFIG_PCI */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_PPC_PCI_H */ diff --git a/include/asm-powerpc/ppc4xx.h b/include/asm-powerpc/ppc4xx.h deleted file mode 100644 index 033039a80c42..000000000000 --- a/include/asm-powerpc/ppc4xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * PPC4xx Prototypes and definitions - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * - * This is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef __ASM_POWERPC_PPC4xx_H__ -#define __ASM_POWERPC_PPC4xx_H__ - -extern void ppc4xx_reset_system(char *cmd); - -#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h deleted file mode 100644 index 0966899d974b..000000000000 --- a/include/asm-powerpc/ppc_asm.h +++ /dev/null @@ -1,689 +0,0 @@ -/* - * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. - */ -#ifndef _ASM_POWERPC_PPC_ASM_H -#define _ASM_POWERPC_PPC_ASM_H - -#include -#include -#include - -#ifndef __ASSEMBLY__ -#error __FILE__ should only be used in assembler files -#else - -#define SZL (BITS_PER_LONG/8) - -/* - * Stuff for accurate CPU time accounting. - * These macros handle transitions between user and system state - * in exception entry and exit and accumulate time to the - * user_time and system_time fields in the paca. - */ - -#ifndef CONFIG_VIRT_CPU_ACCOUNTING -#define ACCOUNT_CPU_USER_ENTRY(ra, rb) -#define ACCOUNT_CPU_USER_EXIT(ra, rb) -#else -#define ACCOUNT_CPU_USER_ENTRY(ra, rb) \ - beq 2f; /* if from kernel mode */ \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ - subf rb,rb,ra; /* subtract start value */ \ - ld ra,PACA_USER_TIME(r13); \ - add ra,ra,rb; /* add on to user time */ \ - std ra,PACA_USER_TIME(r13); \ -2: - -#define ACCOUNT_CPU_USER_EXIT(ra, rb) \ -BEGIN_FTR_SECTION; \ - mfspr ra,SPRN_PURR; /* get processor util. reg */ \ -END_FTR_SECTION_IFSET(CPU_FTR_PURR); \ -BEGIN_FTR_SECTION; \ - MFTB(ra); /* or get TB if no PURR */ \ -END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ - ld rb,PACA_STARTPURR(r13); \ - std ra,PACA_STARTPURR(r13); \ - subf rb,rb,ra; /* subtract start value */ \ - ld ra,PACA_SYSTEM_TIME(r13); \ - add ra,ra,rb; /* add on to user time */ \ - std ra,PACA_SYSTEM_TIME(r13); -#endif - -/* - * Macros for storing registers into and loading registers from - * exception frames. - */ -#ifdef __powerpc64__ -#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) -#define REST_GPR(n, base) ld n,GPR0+8*(n)(base) -#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) -#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) -#else -#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) -#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) -#define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ - SAVE_10GPRS(22, base) -#define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ - REST_10GPRS(22, base) -#endif - -/* - * Define what the VSX XX1 form instructions will look like, then add - * the 128 bit load store instructions based on that. - */ -#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ - ((rb) << 11) | (((xs) >> 5))) - -#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) -#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) - -#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) -#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) -#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) -#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) -#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) -#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) -#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) -#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) - -#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) -#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) -#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) -#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) -#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) -#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) -#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) -#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) -#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) -#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) -#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) -#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) - -#define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base -#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) -#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) -#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) -#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) -#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) -#define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base -#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) -#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) -#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) -#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) -#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) - -/* Save the lower 32 VSRs in the thread VSR region */ -#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) -#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) -#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) -#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) -#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) -#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) -#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) -#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) -#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) -#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) -#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) -#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) -/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ -#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) -#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) -#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) -#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) -#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) -#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) -#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) -#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) -#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) -#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) -#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) -#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) - -#define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) -#define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) -#define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) -#define SAVE_8EVRS(n,s,base) SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base) -#define SAVE_16EVRS(n,s,base) SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base) -#define SAVE_32EVRS(n,s,base) SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base) -#define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n -#define REST_2EVRS(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) -#define REST_4EVRS(n,s,base) REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base) -#define REST_8EVRS(n,s,base) REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base) -#define REST_16EVRS(n,s,base) REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base) -#define REST_32EVRS(n,s,base) REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base) - -/* Macros to adjust thread priority for hardware multithreading */ -#define HMT_VERY_LOW or 31,31,31 # very low priority -#define HMT_LOW or 1,1,1 -#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority -#define HMT_MEDIUM or 2,2,2 -#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority -#define HMT_HIGH or 3,3,3 - -/* handle instructions that older assemblers may not know */ -#define RFCI .long 0x4c000066 /* rfci instruction */ -#define RFDI .long 0x4c00004e /* rfdi instruction */ -#define RFMCI .long 0x4c00004c /* rfmci instruction */ - -#ifdef __KERNEL__ -#ifdef CONFIG_PPC64 - -#define XGLUE(a,b) a##b -#define GLUE(a,b) XGLUE(a,b) - -#define _GLOBAL(name) \ - .section ".text"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _INIT_GLOBAL(name) \ - .section ".text.init.refok"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _KPROBE(name) \ - .section ".kprobes.text","a"; \ - .align 2 ; \ - .globl name; \ - .globl GLUE(.,name); \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _STATIC(name) \ - .section ".text"; \ - .align 2 ; \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#define _INIT_STATIC(name) \ - .section ".text.init.refok"; \ - .align 2 ; \ - .section ".opd","aw"; \ -name: \ - .quad GLUE(.,name); \ - .quad .TOC.@tocbase; \ - .quad 0; \ - .previous; \ - .type GLUE(.,name),@function; \ -GLUE(.,name): - -#else /* 32-bit */ - -#define _ENTRY(n) \ - .globl n; \ -n: - -#define _GLOBAL(n) \ - .text; \ - .stabs __stringify(n:F-1),N_FUN,0,0,n;\ - .globl n; \ -n: - -#define _KPROBE(n) \ - .section ".kprobes.text","a"; \ - .globl n; \ -n: - -#endif - -/* - * LOAD_REG_IMMEDIATE(rn, expr) - * Loads the value of the constant expression 'expr' into register 'rn' - * using immediate instructions only. Use this when it's important not - * to reference other data (i.e. on ppc64 when the TOC pointer is not - * valid). - * - * LOAD_REG_ADDR(rn, name) - * Loads the address of label 'name' into register 'rn'. Use this when - * you don't particularly need immediate instructions only, but you need - * the whole address in one register (e.g. it's a structure address and - * you want to access various offsets within it). On ppc32 this is - * identical to LOAD_REG_IMMEDIATE. - * - * LOAD_REG_ADDRBASE(rn, name) - * ADDROFF(name) - * LOAD_REG_ADDRBASE loads part of the address of label 'name' into - * register 'rn'. ADDROFF(name) returns the remainder of the address as - * a constant expression. ADDROFF(name) is a signed expression < 16 bits - * in size, so is suitable for use directly as an offset in load and store - * instructions. Use this when loading/storing a single word or less as: - * LOAD_REG_ADDRBASE(rX, name) - * ld rY,ADDROFF(name)(rX) - */ -#ifdef __powerpc64__ -#define LOAD_REG_IMMEDIATE(reg,expr) \ - lis (reg),(expr)@highest; \ - ori (reg),(reg),(expr)@higher; \ - rldicr (reg),(reg),32,31; \ - oris (reg),(reg),(expr)@h; \ - ori (reg),(reg),(expr)@l; - -#define LOAD_REG_ADDR(reg,name) \ - ld (reg),name@got(r2) - -#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) -#define ADDROFF(name) 0 - -/* offsets for stack frame layout */ -#define LRSAVE 16 - -#else /* 32-bit */ - -#define LOAD_REG_IMMEDIATE(reg,expr) \ - lis (reg),(expr)@ha; \ - addi (reg),(reg),(expr)@l; - -#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) - -#define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha -#define ADDROFF(name) name@l - -/* offsets for stack frame layout */ -#define LRSAVE 4 - -#endif - -/* various errata or part fixups */ -#ifdef CONFIG_PPC601_SYNC_FIX -#define SYNC \ -BEGIN_FTR_SECTION \ - sync; \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define SYNC_601 \ -BEGIN_FTR_SECTION \ - sync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#define ISYNC_601 \ -BEGIN_FTR_SECTION \ - isync; \ -END_FTR_SECTION_IFSET(CPU_FTR_601) -#else -#define SYNC -#define SYNC_601 -#define ISYNC_601 -#endif - -#ifdef CONFIG_PPC_CELL -#define MFTB(dest) \ -90: mftb dest; \ -BEGIN_FTR_SECTION_NESTED(96); \ - cmpwi dest,0; \ - beq- 90b; \ -END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) -#else -#define MFTB(dest) mftb dest -#endif - -#ifndef CONFIG_SMP -#define TLBSYNC -#else /* CONFIG_SMP */ -/* tlbsync is not implemented on 601 */ -#define TLBSYNC \ -BEGIN_FTR_SECTION \ - tlbsync; \ - sync; \ -END_FTR_SECTION_IFCLR(CPU_FTR_601) -#endif - - -/* - * This instruction is not implemented on the PPC 603 or 601; however, on - * the 403GCX and 405GP tlbia IS defined and tlbie is not. - * All of these instructions exist in the 8xx, they have magical powers, - * and they must be used. - */ - -#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) -#define tlbia \ - li r4,1024; \ - mtctr r4; \ - lis r4,KERNELBASE@h; \ -0: tlbie r4; \ - addi r4,r4,0x1000; \ - bdnz 0b -#endif - - -#ifdef CONFIG_IBM440EP_ERR42 -#define PPC440EP_ERR42 isync -#else -#define PPC440EP_ERR42 -#endif - - -#if defined(CONFIG_BOOKE) -#define toreal(rd) -#define fromreal(rd) - -/* - * We use addis to ensure compatibility with the "classic" ppc versions of - * these macros, which use rs = 0 to get the tophys offset in rd, rather than - * converting the address in r0, and so this version has to do that too - * (i.e. set register rd to 0 when rs == 0). - */ -#define tophys(rd,rs) \ - addis rd,rs,0 - -#define tovirt(rd,rs) \ - addis rd,rs,0 - -#elif defined(CONFIG_PPC64) -#define toreal(rd) /* we can access c000... in real mode */ -#define fromreal(rd) - -#define tophys(rd,rs) \ - clrldi rd,rs,2 - -#define tovirt(rd,rs) \ - rotldi rd,rs,16; \ - ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ - rotldi rd,rd,48 -#else -/* - * On APUS (Amiga PowerPC cpu upgrade board), we don't know the - * physical base address of RAM at compile time. - */ -#define toreal(rd) tophys(rd,rd) -#define fromreal(rd) tovirt(rd,rd) - -#define tophys(rd,rs) \ -0: addis rd,rs,-KERNELBASE@h; \ - .section ".vtop_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous - -#define tovirt(rd,rs) \ -0: addis rd,rs,KERNELBASE@h; \ - .section ".ptov_fixup","aw"; \ - .align 1; \ - .long 0b; \ - .previous -#endif - -#ifdef CONFIG_PPC64 -#define RFI rfid -#define MTMSRD(r) mtmsrd r - -#else -#define FIX_SRR1(ra, rb) -#ifndef CONFIG_40x -#define RFI rfi -#else -#define RFI rfi; b . /* Prevent prefetch past rfi */ -#endif -#define MTMSRD(r) mtmsr r -#define CLR_TOP32(r) -#endif - -#endif /* __KERNEL__ */ - -/* The boring bits... */ - -/* Condition Register Bit Fields */ - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - - -/* General Purpose Registers (GPRs) */ - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - - -/* Floating Point Registers (FPRs) */ - -#define fr0 0 -#define fr1 1 -#define fr2 2 -#define fr3 3 -#define fr4 4 -#define fr5 5 -#define fr6 6 -#define fr7 7 -#define fr8 8 -#define fr9 9 -#define fr10 10 -#define fr11 11 -#define fr12 12 -#define fr13 13 -#define fr14 14 -#define fr15 15 -#define fr16 16 -#define fr17 17 -#define fr18 18 -#define fr19 19 -#define fr20 20 -#define fr21 21 -#define fr22 22 -#define fr23 23 -#define fr24 24 -#define fr25 25 -#define fr26 26 -#define fr27 27 -#define fr28 28 -#define fr29 29 -#define fr30 30 -#define fr31 31 - -/* AltiVec Registers (VPRs) */ - -#define vr0 0 -#define vr1 1 -#define vr2 2 -#define vr3 3 -#define vr4 4 -#define vr5 5 -#define vr6 6 -#define vr7 7 -#define vr8 8 -#define vr9 9 -#define vr10 10 -#define vr11 11 -#define vr12 12 -#define vr13 13 -#define vr14 14 -#define vr15 15 -#define vr16 16 -#define vr17 17 -#define vr18 18 -#define vr19 19 -#define vr20 20 -#define vr21 21 -#define vr22 22 -#define vr23 23 -#define vr24 24 -#define vr25 25 -#define vr26 26 -#define vr27 27 -#define vr28 28 -#define vr29 29 -#define vr30 30 -#define vr31 31 - -/* VSX Registers (VSRs) */ - -#define vsr0 0 -#define vsr1 1 -#define vsr2 2 -#define vsr3 3 -#define vsr4 4 -#define vsr5 5 -#define vsr6 6 -#define vsr7 7 -#define vsr8 8 -#define vsr9 9 -#define vsr10 10 -#define vsr11 11 -#define vsr12 12 -#define vsr13 13 -#define vsr14 14 -#define vsr15 15 -#define vsr16 16 -#define vsr17 17 -#define vsr18 18 -#define vsr19 19 -#define vsr20 20 -#define vsr21 21 -#define vsr22 22 -#define vsr23 23 -#define vsr24 24 -#define vsr25 25 -#define vsr26 26 -#define vsr27 27 -#define vsr28 28 -#define vsr29 29 -#define vsr30 30 -#define vsr31 31 -#define vsr32 32 -#define vsr33 33 -#define vsr34 34 -#define vsr35 35 -#define vsr36 36 -#define vsr37 37 -#define vsr38 38 -#define vsr39 39 -#define vsr40 40 -#define vsr41 41 -#define vsr42 42 -#define vsr43 43 -#define vsr44 44 -#define vsr45 45 -#define vsr46 46 -#define vsr47 47 -#define vsr48 48 -#define vsr49 49 -#define vsr50 50 -#define vsr51 51 -#define vsr52 52 -#define vsr53 53 -#define vsr54 54 -#define vsr55 55 -#define vsr56 56 -#define vsr57 57 -#define vsr58 58 -#define vsr59 59 -#define vsr60 60 -#define vsr61 61 -#define vsr62 62 -#define vsr63 63 - -/* SPE Registers (EVPRs) */ - -#define evr0 0 -#define evr1 1 -#define evr2 2 -#define evr3 3 -#define evr4 4 -#define evr5 5 -#define evr6 6 -#define evr7 7 -#define evr8 8 -#define evr9 9 -#define evr10 10 -#define evr11 11 -#define evr12 12 -#define evr13 13 -#define evr14 14 -#define evr15 15 -#define evr16 16 -#define evr17 17 -#define evr18 18 -#define evr19 19 -#define evr20 20 -#define evr21 21 -#define evr22 22 -#define evr23 23 -#define evr24 24 -#define evr25 25 -#define evr26 26 -#define evr27 27 -#define evr28 28 -#define evr29 29 -#define evr30 30 -#define evr31 31 - -/* some stab codes */ -#define N_FUN 36 -#define N_RSYM 64 -#define N_SLINE 68 -#define N_SO 100 - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h deleted file mode 100644 index 101ed87f7d84..000000000000 --- a/include/asm-powerpc/processor.h +++ /dev/null @@ -1,314 +0,0 @@ -#ifndef _ASM_POWERPC_PROCESSOR_H -#define _ASM_POWERPC_PROCESSOR_H - -/* - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -#ifdef CONFIG_VSX -#define TS_FPRWIDTH 2 -#else -#define TS_FPRWIDTH 1 -#endif - -#ifndef __ASSEMBLY__ -#include -#include -#include - -/* We do _not_ want to define new machine types at all, those must die - * in favor of using the device-tree - * -- BenH. - */ - -/* PREP sub-platform types see residual.h for these */ -#define _PREP_Motorola 0x01 /* motorola prep */ -#define _PREP_Firm 0x02 /* firmworks prep */ -#define _PREP_IBM 0x00 /* ibm prep */ -#define _PREP_Bull 0x03 /* bull prep */ - -/* CHRP sub-platform types. These are arbitrary */ -#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ -#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ -#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ -#define _CHRP_briq 0x07 /* TotalImpact's briQ */ - -#if defined(__KERNEL__) && defined(CONFIG_PPC32) - -extern int _chrp_type; - -#ifdef CONFIG_PPC_PREP - -/* what kind of prep workstation we are */ -extern int _prep_type; - -#endif /* CONFIG_PPC_PREP */ - -#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -/* Macros for adjusting thread priority (hardware multi-threading) */ -#define HMT_very_low() asm volatile("or 31,31,31 # very low priority") -#define HMT_low() asm volatile("or 1,1,1 # low priority") -#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority") -#define HMT_medium() asm volatile("or 2,2,2 # medium priority") -#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority") -#define HMT_high() asm volatile("or 3,3,3 # high priority") - -#ifdef __KERNEL__ - -extern int have_of; - -struct task_struct; -void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); -void release_thread(struct task_struct *); - -/* Prepare to copy thread state - unlazy all lazy status */ -extern void prepare_to_copy(struct task_struct *tsk); - -/* Create a new kernel thread. */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; -extern struct task_struct *last_task_used_altivec; -extern struct task_struct *last_task_used_vsx; -extern struct task_struct *last_task_used_spe; - -#ifdef CONFIG_PPC32 - -#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START -#error User TASK_SIZE overlaps with KERNEL_START address -#endif -#define TASK_SIZE (CONFIG_TASK_SIZE) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) -#endif - -#ifdef CONFIG_PPC64 -/* 64-bit user address space is 44-bits (16TB user VM) */ -#define TASK_SIZE_USER64 (0x0000100000000000UL) - -/* - * 32-bit user address space is 4GB - 1 page - * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT - */ -#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE)) - -#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \ - TASK_SIZE_USER32 : TASK_SIZE_USER64) -#define TASK_SIZE TASK_SIZE_OF(current) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) -#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4)) - -#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \ - TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 ) -#endif - -#ifdef __KERNEL__ -#ifdef __powerpc64__ - -#define STACK_TOP_USER64 TASK_SIZE_USER64 -#define STACK_TOP_USER32 TASK_SIZE_USER32 - -#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ - STACK_TOP_USER32 : STACK_TOP_USER64) - -#define STACK_TOP_MAX STACK_TOP_USER64 - -#else /* __powerpc64__ */ - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -#endif /* __powerpc64__ */ -#endif /* __KERNEL__ */ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define TS_FPROFFSET 0 -#define TS_VSRLOWOFFSET 1 -#define TS_FPR(i) fpr[i][TS_FPROFFSET] - -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ - -#ifdef CONFIG_PPC64 - unsigned long ksp_vsid; -#endif - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ -#ifdef CONFIG_PPC32 - void *pgdir; /* root of page-table tree */ -#endif -#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) - unsigned long dbcr0; /* debug control register values */ - unsigned long dbcr1; -#endif - /* FP and VSX 0-31 register set */ - double fpr[32][TS_FPRWIDTH]; - struct { - - unsigned int pad; - unsigned int val; /* Floating point status */ - } fpscr; - int fpexc_mode; /* floating-point exception mode */ - unsigned int align_ctl; /* alignment handling control */ -#ifdef CONFIG_PPC64 - unsigned long start_tb; /* Start purr when proc switched in */ - unsigned long accum_tb; /* Total accumilated purr for process */ -#endif - unsigned long dabr; /* Data address breakpoint register */ -#ifdef CONFIG_ALTIVEC - /* Complete AltiVec register set */ - vector128 vr[32] __attribute__((aligned(16))); - /* AltiVec status */ - vector128 vscr __attribute__((aligned(16))); - unsigned long vrsave; - int used_vr; /* set if process has used altivec */ -#endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_VSX - /* VSR status */ - int used_vsr; /* set if process has used altivec */ -#endif /* CONFIG_VSX */ -#ifdef CONFIG_SPE - unsigned long evr[32]; /* upper 32-bits of SPE regs */ - u64 acc; /* Accumulator */ - unsigned long spefscr; /* SPE & eFP status */ - int used_spe; /* set if process has used spe */ -#endif /* CONFIG_SPE */ -}; - -#define ARCH_MIN_TASKALIGN 16 - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) -#define INIT_SP_LIMIT \ - (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) - - -#ifdef CONFIG_PPC32 -#define INIT_THREAD { \ - .ksp = INIT_SP, \ - .ksp_limit = INIT_SP_LIMIT, \ - .fs = KERNEL_DS, \ - .pgdir = swapper_pg_dir, \ - .fpexc_mode = MSR_FE0 | MSR_FE1, \ -} -#else -#define INIT_THREAD { \ - .ksp = INIT_SP, \ - .ksp_limit = INIT_SP_LIMIT, \ - .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ - .fs = KERNEL_DS, \ - .fpr = {{0}}, \ - .fpscr = { .val = 0, }, \ - .fpexc_mode = 0, \ -} -#endif - -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -#define thread_saved_pc(tsk) \ - ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) - -#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) -#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) - -/* Get/set floating-point exception mode */ -#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) -#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) - -extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); -extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); - -#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr)) -#define SET_ENDIAN(tsk, val) set_endian((tsk), (val)) - -extern int get_endian(struct task_struct *tsk, unsigned long adr); -extern int set_endian(struct task_struct *tsk, unsigned int val); - -#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) -#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) - -extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); -extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); - -static inline unsigned int __unpack_fe01(unsigned long msr_bits) -{ - return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); -} - -static inline unsigned long __pack_fe01(unsigned int fpmode) -{ - return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); -} - -#ifdef CONFIG_PPC64 -#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0) -#else -#define cpu_relax() barrier() -#endif - -/* Check that a certain kernel stack pointer is valid in task_struct p */ -int validate_sp(unsigned long sp, struct task_struct *p, - unsigned long nbytes); - -/* - * Prefetch macros. - */ -#define ARCH_HAS_PREFETCH -#define ARCH_HAS_PREFETCHW -#define ARCH_HAS_SPINLOCK_PREFETCH - -static inline void prefetch(const void *x) -{ - if (unlikely(!x)) - return; - - __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); -} - -static inline void prefetchw(const void *x) -{ - if (unlikely(!x)) - return; - - __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); -} - -#define spin_lock_prefetch(x) prefetchw(x) - -#ifdef CONFIG_PPC64 -#define HAVE_ARCH_PICK_MMAP_LAYOUT -#endif - -#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h deleted file mode 100644 index eb3bd2e1c7f6..000000000000 --- a/include/asm-powerpc/prom.h +++ /dev/null @@ -1,356 +0,0 @@ -#ifndef _POWERPC_PROM_H -#define _POWERPC_PROM_H -#ifdef __KERNEL__ - -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996-2005 Paul Mackerras. - * - * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#include -#include -#include - -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strcasecmp((s1), (s2)) -#define of_prop_cmp(s1, s2) strcmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcasecmp((s1), (s2)) - -/* Definitions used by the flattened device tree */ -#define OF_DT_HEADER 0xd00dfeed /* marker */ -#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ -#define OF_DT_END_NODE 0x2 /* End node */ -#define OF_DT_PROP 0x3 /* Property: name off, size, - * content */ -#define OF_DT_NOP 0x4 /* nop */ -#define OF_DT_END 0x9 - -#define OF_DT_VERSION 0x10 - -/* - * This is what gets passed to the kernel by prom_init or kexec - * - * The dt struct contains the device tree structure, full pathes and - * property contents. The dt strings contain a separate block with just - * the strings for the property names, and is fully page aligned and - * self contained in a page, so that it can be kept around by the kernel, - * each property name appears only once in this page (cheap compression) - * - * the mem_rsvmap contains a map of reserved ranges of physical memory, - * passing it here instead of in the device-tree itself greatly simplifies - * the job of everybody. It's just a list of u64 pairs (base/size) that - * ends when size is 0 - */ -struct boot_param_header -{ - u32 magic; /* magic word OF_DT_HEADER */ - u32 totalsize; /* total size of DT block */ - u32 off_dt_struct; /* offset to structure */ - u32 off_dt_strings; /* offset to strings */ - u32 off_mem_rsvmap; /* offset to memory reserve map */ - u32 version; /* format version */ - u32 last_comp_version; /* last compatible version */ - /* version 2 fields below */ - u32 boot_cpuid_phys; /* Physical CPU id we're booting on */ - /* version 3 fields below */ - u32 dt_strings_size; /* size of the DT strings block */ - /* version 17 fields below */ - u32 dt_struct_size; /* size of the DT structure block */ -}; - - - -typedef u32 phandle; -typedef u32 ihandle; - -struct property { - char *name; - int length; - void *value; - struct property *next; -}; - -struct device_node { - const char *name; - const char *type; - phandle node; - phandle linux_phandle; - char *full_name; - - struct property *properties; - struct property *deadprops; /* removed properties */ - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct kref kref; - unsigned long _flags; - void *data; -}; - -extern struct device_node *of_chosen; - -static inline int of_node_check_flag(struct device_node *n, unsigned long flag) -{ - return test_bit(flag, &n->_flags); -} - -static inline void of_node_set_flag(struct device_node *n, unsigned long flag) -{ - set_bit(flag, &n->_flags); -} - - -#define HAVE_ARCH_DEVTREE_FIXUPS - -static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de) -{ - dn->pde = de; -} - - -extern struct device_node *of_find_all_nodes(struct device_node *prev); -extern struct device_node *of_node_get(struct device_node *node); -extern void of_node_put(struct device_node *node); - -/* For scanning the flat device-tree at boot time */ -extern int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data); -extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size); -extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name); -extern unsigned long __init of_get_flat_dt_root(void); - -/* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); - -/* Other Prototypes */ -extern void finish_device_tree(void); -extern void unflatten_device_tree(void); -extern void early_init_devtree(void *); -extern int machine_is_compatible(const char *compat); -extern void print_properties(struct device_node *node); -extern int prom_n_intr_cells(struct device_node* np); -extern void prom_get_irq_senses(unsigned char *senses, int off, int max); -extern int prom_add_property(struct device_node* np, struct property* prop); -extern int prom_remove_property(struct device_node *np, struct property *prop); -extern int prom_update_property(struct device_node *np, - struct property *newprop, - struct property *oldprop); - -#ifdef CONFIG_PPC32 -/* - * PCI <-> OF matching functions - * (XXX should these be here?) - */ -struct pci_bus; -struct pci_dev; -extern int pci_device_from_OF_node(struct device_node *node, - u8* bus, u8* devfn); -extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int); -extern struct device_node* pci_device_to_OF_node(struct pci_dev *); -extern void pci_create_OF_bus_map(void); -#endif - -extern struct resource *request_OF_resource(struct device_node* node, - int index, const char* name_postfix); -extern int release_OF_resource(struct device_node* node, int index); - - -/* - * OF address retreival & translation - */ - - -/* Helper to read a big number; size is in cells (not bytes) */ -static inline u64 of_read_number(const u32 *cell, int size) -{ - u64 r = 0; - while (size--) - r = (r << 32) | *(cell++); - return r; -} - -/* Like of_read_number, but we want an unsigned long result */ -#ifdef CONFIG_PPC32 -static inline unsigned long of_read_ulong(const u32 *cell, int size) -{ - return cell[size-1]; -} -#else -#define of_read_ulong(cell, size) of_read_number(cell, size) -#endif - -/* Translate an OF address block into a CPU physical address - */ -extern u64 of_translate_address(struct device_node *np, const u32 *addr); - -/* Translate a DMA address from device space to CPU space */ -extern u64 of_translate_dma_address(struct device_node *dev, - const u32 *in_addr); - -/* Extract an address from a device, returns the region size and - * the address space flags too. The PCI version uses a BAR number - * instead of an absolute index - */ -extern const u32 *of_get_address(struct device_node *dev, int index, - u64 *size, unsigned int *flags); -#ifdef CONFIG_PCI -extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, - u64 *size, unsigned int *flags); -#else -static inline const u32 *of_get_pci_address(struct device_node *dev, - int bar_no, u64 *size, unsigned int *flags) -{ - return NULL; -} -#endif /* CONFIG_PCI */ - -/* Get an address as a resource. Note that if your address is - * a PIO address, the conversion will fail if the physical address - * can't be internally converted to an IO token with - * pci_address_to_pio(), that is because it's either called to early - * or it can't be matched to any host bridge IO space - */ -extern int of_address_to_resource(struct device_node *dev, int index, - struct resource *r); -#ifdef CONFIG_PCI -extern int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r); -#else -static inline int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - return -ENOSYS; -} -#endif /* CONFIG_PCI */ - -/* Parse the ibm,dma-window property of an OF node into the busno, phys and - * size parameters. - */ -void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, - unsigned long *busno, unsigned long *phys, unsigned long *size); - -extern void kdump_move_device_tree(void); - -/* CPU OF node matching */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); - -/* Get the MAC address */ -extern const void *of_get_mac_address(struct device_node *np); - -/* - * OF interrupt mapping - */ - -/* This structure is returned when an interrupt is mapped. The controller - * field needs to be put() after use - */ - -#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */ - -struct of_irq { - struct device_node *controller; /* Interrupt controller node */ - u32 size; /* Specifier size */ - u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */ -}; - -/** - * of_irq_map_init - Initialize the irq remapper - * @flags: flags defining workarounds to enable - * - * Some machines have bugs in the device-tree which require certain workarounds - * to be applied. Call this before any interrupt mapping attempts to enable - * those workarounds. - */ -#define OF_IMAP_OLDWORLD_MAC 0x00000001 -#define OF_IMAP_NO_PHANDLE 0x00000002 - -extern void of_irq_map_init(unsigned int flags); - -/** - * of_irq_map_raw - Low level interrupt tree parsing - * @parent: the device interrupt parent - * @intspec: interrupt specifier ("interrupts" property of the device) - * @ointsize: size of the passed in interrupt specifier - * @addr: address specifier (start of "reg" property of the device) - * @out_irq: structure of_irq filled by this function - * - * Returns 0 on success and a negative number on error - * - * This function is a low-level interrupt tree walking function. It - * can be used to do a partial walk with synthetized reg and interrupts - * properties, for example when resolving PCI interrupts when no device - * node exist for the parent. - * - */ - -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, - struct of_irq *out_irq); - - -/** - * of_irq_map_one - Resolve an interrupt for a device - * @device: the device whose interrupt is to be resolved - * @index: index of the interrupt to resolve - * @out_irq: structure of_irq filled by this function - * - * This function resolves an interrupt, walking the tree, for a given - * device-tree node. It's the high level pendant to of_irq_map_raw(). - * It also implements the workarounds for OldWolrd Macs. - */ -extern int of_irq_map_one(struct device_node *device, int index, - struct of_irq *out_irq); - -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - -extern int of_irq_to_resource(struct device_node *dev, int index, - struct resource *r); - -/** - * of_iomap - Maps the memory mapped IO for a given device_node - * @device: the device whose io range will be mapped - * @index: index of the io range - * - * Returns a pointer to the mapped memory - */ -extern void __iomem *of_iomap(struct device_node *device, int index); - -/* - * NB: This is here while we transition from using asm/prom.h - * to linux/of.h - */ -#include - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_PROM_H */ diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h deleted file mode 100644 index f9e34c493cbb..000000000000 --- a/include/asm-powerpc/ps3.h +++ /dev/null @@ -1,519 +0,0 @@ -/* - * PS3 platform declarations. - * - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_ASM_POWERPC_PS3_H) -#define _ASM_POWERPC_PS3_H - -#include -#include -#include -#include "cell-pmu.h" - -union ps3_firmware_version { - u64 raw; - struct { - u16 pad; - u16 major; - u16 minor; - u16 rev; - }; -}; - -void ps3_get_firmware_version(union ps3_firmware_version *v); -int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev); - -/* 'Other OS' area */ - -enum ps3_param_av_multi_out { - PS3_PARAM_AV_MULTI_OUT_NTSC = 0, - PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, - PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, - PS3_PARAM_AV_MULTI_OUT_SECAM = 3, -}; - -enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); - -/* dma routines */ - -enum ps3_dma_page_size { - PS3_DMA_4K = 12U, - PS3_DMA_64K = 16U, - PS3_DMA_1M = 20U, - PS3_DMA_16M = 24U, -}; - -enum ps3_dma_region_type { - PS3_DMA_OTHER = 0, - PS3_DMA_INTERNAL = 2, -}; - -struct ps3_dma_region_ops; - -/** - * struct ps3_dma_region - A per device dma state variables structure - * @did: The HV device id. - * @page_size: The ioc pagesize. - * @region_type: The HV region type. - * @bus_addr: The 'translated' bus address of the region. - * @len: The length in bytes of the region. - * @offset: The offset from the start of memory of the region. - * @ioid: The IOID of the device who owns this region - * @chunk_list: Opaque variable used by the ioc page manager. - * @region_ops: struct ps3_dma_region_ops - dma region operations - */ - -struct ps3_dma_region { - struct ps3_system_bus_device *dev; - /* device variables */ - const struct ps3_dma_region_ops *region_ops; - unsigned char ioid; - enum ps3_dma_page_size page_size; - enum ps3_dma_region_type region_type; - unsigned long len; - unsigned long offset; - - /* driver variables (set by ps3_dma_region_create) */ - unsigned long bus_addr; - struct { - spinlock_t lock; - struct list_head head; - } chunk_list; -}; - -struct ps3_dma_region_ops { - int (*create)(struct ps3_dma_region *); - int (*free)(struct ps3_dma_region *); - int (*map)(struct ps3_dma_region *, - unsigned long virt_addr, - unsigned long len, - unsigned long *bus_addr, - u64 iopte_pp); - int (*unmap)(struct ps3_dma_region *, - unsigned long bus_addr, - unsigned long len); -}; -/** - * struct ps3_dma_region_init - Helper to initialize structure variables - * - * Helper to properly initialize variables prior to calling - * ps3_system_bus_device_register. - */ - -struct ps3_system_bus_device; - -int ps3_dma_region_init(struct ps3_system_bus_device *dev, - struct ps3_dma_region *r, enum ps3_dma_page_size page_size, - enum ps3_dma_region_type region_type, void *addr, unsigned long len); -int ps3_dma_region_create(struct ps3_dma_region *r); -int ps3_dma_region_free(struct ps3_dma_region *r); -int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, - unsigned long len, unsigned long *bus_addr, - u64 iopte_pp); -int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr, - unsigned long len); - -/* mmio routines */ - -enum ps3_mmio_page_size { - PS3_MMIO_4K = 12U, - PS3_MMIO_64K = 16U -}; - -struct ps3_mmio_region_ops; -/** - * struct ps3_mmio_region - a per device mmio state variables structure - * - * Current systems can be supported with a single region per device. - */ - -struct ps3_mmio_region { - struct ps3_system_bus_device *dev; - const struct ps3_mmio_region_ops *mmio_ops; - unsigned long bus_addr; - unsigned long len; - enum ps3_mmio_page_size page_size; - unsigned long lpar_addr; -}; - -struct ps3_mmio_region_ops { - int (*create)(struct ps3_mmio_region *); - int (*free)(struct ps3_mmio_region *); -}; -/** - * struct ps3_mmio_region_init - Helper to initialize structure variables - * - * Helper to properly initialize variables prior to calling - * ps3_system_bus_device_register. - */ - -int ps3_mmio_region_init(struct ps3_system_bus_device *dev, - struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, - enum ps3_mmio_page_size page_size); -int ps3_mmio_region_create(struct ps3_mmio_region *r); -int ps3_free_mmio_region(struct ps3_mmio_region *r); -unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); - -/* inrerrupt routines */ - -enum ps3_cpu_binding { - PS3_BINDING_CPU_ANY = -1, - PS3_BINDING_CPU_0 = 0, - PS3_BINDING_CPU_1 = 1, -}; - -int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, - unsigned int *virq); -int ps3_irq_plug_destroy(unsigned int virq); -int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq); -int ps3_event_receive_port_destroy(unsigned int virq); -int ps3_send_event_locally(unsigned int virq); - -int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, - unsigned int *virq); -int ps3_io_irq_destroy(unsigned int virq); -int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, - unsigned int *virq); -int ps3_vuart_irq_destroy(unsigned int virq); -int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, - unsigned int class, unsigned int *virq); -int ps3_spe_irq_destroy(unsigned int virq); - -int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, - enum ps3_cpu_binding cpu, unsigned int *virq); -int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, - unsigned int virq); - -/* lv1 result codes */ - -enum lv1_result { - LV1_SUCCESS = 0, - /* not used -1 */ - LV1_RESOURCE_SHORTAGE = -2, - LV1_NO_PRIVILEGE = -3, - LV1_DENIED_BY_POLICY = -4, - LV1_ACCESS_VIOLATION = -5, - LV1_NO_ENTRY = -6, - LV1_DUPLICATE_ENTRY = -7, - LV1_TYPE_MISMATCH = -8, - LV1_BUSY = -9, - LV1_EMPTY = -10, - LV1_WRONG_STATE = -11, - /* not used -12 */ - LV1_NO_MATCH = -13, - LV1_ALREADY_CONNECTED = -14, - LV1_UNSUPPORTED_PARAMETER_VALUE = -15, - LV1_CONDITION_NOT_SATISFIED = -16, - LV1_ILLEGAL_PARAMETER_VALUE = -17, - LV1_BAD_OPTION = -18, - LV1_IMPLEMENTATION_LIMITATION = -19, - LV1_NOT_IMPLEMENTED = -20, - LV1_INVALID_CLASS_ID = -21, - LV1_CONSTRAINT_NOT_SATISFIED = -22, - LV1_ALIGNMENT_ERROR = -23, - LV1_HARDWARE_ERROR = -24, - LV1_INVALID_DATA_FORMAT = -25, - LV1_INVALID_OPERATION = -26, - LV1_INTERNAL_ERROR = -32768, -}; - -static inline const char* ps3_result(int result) -{ -#if defined(DEBUG) - switch (result) { - case LV1_SUCCESS: - return "LV1_SUCCESS (0)"; - case -1: - return "** unknown result ** (-1)"; - case LV1_RESOURCE_SHORTAGE: - return "LV1_RESOURCE_SHORTAGE (-2)"; - case LV1_NO_PRIVILEGE: - return "LV1_NO_PRIVILEGE (-3)"; - case LV1_DENIED_BY_POLICY: - return "LV1_DENIED_BY_POLICY (-4)"; - case LV1_ACCESS_VIOLATION: - return "LV1_ACCESS_VIOLATION (-5)"; - case LV1_NO_ENTRY: - return "LV1_NO_ENTRY (-6)"; - case LV1_DUPLICATE_ENTRY: - return "LV1_DUPLICATE_ENTRY (-7)"; - case LV1_TYPE_MISMATCH: - return "LV1_TYPE_MISMATCH (-8)"; - case LV1_BUSY: - return "LV1_BUSY (-9)"; - case LV1_EMPTY: - return "LV1_EMPTY (-10)"; - case LV1_WRONG_STATE: - return "LV1_WRONG_STATE (-11)"; - case -12: - return "** unknown result ** (-12)"; - case LV1_NO_MATCH: - return "LV1_NO_MATCH (-13)"; - case LV1_ALREADY_CONNECTED: - return "LV1_ALREADY_CONNECTED (-14)"; - case LV1_UNSUPPORTED_PARAMETER_VALUE: - return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; - case LV1_CONDITION_NOT_SATISFIED: - return "LV1_CONDITION_NOT_SATISFIED (-16)"; - case LV1_ILLEGAL_PARAMETER_VALUE: - return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; - case LV1_BAD_OPTION: - return "LV1_BAD_OPTION (-18)"; - case LV1_IMPLEMENTATION_LIMITATION: - return "LV1_IMPLEMENTATION_LIMITATION (-19)"; - case LV1_NOT_IMPLEMENTED: - return "LV1_NOT_IMPLEMENTED (-20)"; - case LV1_INVALID_CLASS_ID: - return "LV1_INVALID_CLASS_ID (-21)"; - case LV1_CONSTRAINT_NOT_SATISFIED: - return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; - case LV1_ALIGNMENT_ERROR: - return "LV1_ALIGNMENT_ERROR (-23)"; - case LV1_HARDWARE_ERROR: - return "LV1_HARDWARE_ERROR (-24)"; - case LV1_INVALID_DATA_FORMAT: - return "LV1_INVALID_DATA_FORMAT (-25)"; - case LV1_INVALID_OPERATION: - return "LV1_INVALID_OPERATION (-26)"; - case LV1_INTERNAL_ERROR: - return "LV1_INTERNAL_ERROR (-32768)"; - default: - BUG(); - return "** unknown result **"; - }; -#else - return ""; -#endif -} - -/* system bus routines */ - -enum ps3_match_id { - PS3_MATCH_ID_EHCI = 1, - PS3_MATCH_ID_OHCI = 2, - PS3_MATCH_ID_GELIC = 3, - PS3_MATCH_ID_AV_SETTINGS = 4, - PS3_MATCH_ID_SYSTEM_MANAGER = 5, - PS3_MATCH_ID_STOR_DISK = 6, - PS3_MATCH_ID_STOR_ROM = 7, - PS3_MATCH_ID_STOR_FLASH = 8, - PS3_MATCH_ID_SOUND = 9, - PS3_MATCH_ID_GRAPHICS = 10, - PS3_MATCH_ID_LPM = 11, -}; - -#define PS3_MODULE_ALIAS_EHCI "ps3:1" -#define PS3_MODULE_ALIAS_OHCI "ps3:2" -#define PS3_MODULE_ALIAS_GELIC "ps3:3" -#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4" -#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5" -#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6" -#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7" -#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8" -#define PS3_MODULE_ALIAS_SOUND "ps3:9" -#define PS3_MODULE_ALIAS_GRAPHICS "ps3:10" -#define PS3_MODULE_ALIAS_LPM "ps3:11" - -enum ps3_system_bus_device_type { - PS3_DEVICE_TYPE_IOC0 = 1, - PS3_DEVICE_TYPE_SB, - PS3_DEVICE_TYPE_VUART, - PS3_DEVICE_TYPE_LPM, -}; - -enum ps3_match_sub_id { - /* for PS3_MATCH_ID_GRAPHICS */ - PS3_MATCH_SUB_ID_FB = 1, -}; - -/** - * struct ps3_system_bus_device - a device on the system bus - */ - -struct ps3_system_bus_device { - enum ps3_match_id match_id; - enum ps3_match_sub_id match_sub_id; - enum ps3_system_bus_device_type dev_type; - - u64 bus_id; /* SB */ - u64 dev_id; /* SB */ - unsigned int interrupt_id; /* SB */ - struct ps3_dma_region *d_region; /* SB, IOC0 */ - struct ps3_mmio_region *m_region; /* SB, IOC0*/ - unsigned int port_number; /* VUART */ - struct { /* LPM */ - u64 node_id; - u64 pu_id; - u64 rights; - } lpm; - -/* struct iommu_table *iommu_table; -- waiting for BenH's cleanups */ - struct device core; - void *driver_priv; /* private driver variables */ -}; - -int ps3_open_hv_device(struct ps3_system_bus_device *dev); -int ps3_close_hv_device(struct ps3_system_bus_device *dev); - -/** - * struct ps3_system_bus_driver - a driver for a device on the system bus - */ - -struct ps3_system_bus_driver { - enum ps3_match_id match_id; - enum ps3_match_sub_id match_sub_id; - struct device_driver core; - int (*probe)(struct ps3_system_bus_device *); - int (*remove)(struct ps3_system_bus_device *); - int (*shutdown)(struct ps3_system_bus_device *); -/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ -/* int (*resume)(struct ps3_system_bus_device *); */ -}; - -int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); -int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); -void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); - -static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv( - struct device_driver *_drv) -{ - return container_of(_drv, struct ps3_system_bus_driver, core); -} -static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev( - struct device *_dev) -{ - return container_of(_dev, struct ps3_system_bus_device, core); -} -static inline struct ps3_system_bus_driver * - ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev) -{ - BUG_ON(!_dev); - BUG_ON(!_dev->core.driver); - return ps3_drv_to_system_bus_drv(_dev->core.driver); -} - -/** - * ps3_system_bus_set_drvdata - - * @dev: device structure - * @data: Data to set - */ - -static inline void ps3_system_bus_set_driver_data( - struct ps3_system_bus_device *dev, void *data) -{ - dev->core.driver_data = data; -} -static inline void *ps3_system_bus_get_driver_data( - struct ps3_system_bus_device *dev) -{ - return dev->core.driver_data; -} - -/* These two need global scope for get_dma_ops(). */ - -extern struct bus_type ps3_system_bus_type; - -/* system manager */ - -struct ps3_sys_manager_ops { - struct ps3_system_bus_device *dev; - void (*power_off)(struct ps3_system_bus_device *dev); - void (*restart)(struct ps3_system_bus_device *dev); -}; - -void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); -void __noreturn ps3_sys_manager_power_off(void); -void __noreturn ps3_sys_manager_restart(void); -void __noreturn ps3_sys_manager_halt(void); -int ps3_sys_manager_get_wol(void); -void ps3_sys_manager_set_wol(int state); - -struct ps3_prealloc { - const char *name; - void *address; - unsigned long size; - unsigned long align; -}; - -extern struct ps3_prealloc ps3fb_videomemory; -extern struct ps3_prealloc ps3flash_bounce_buffer; - -/* logical performance monitor */ - -/** - * enum ps3_lpm_rights - Rigths granted by the system policy module. - * - * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm. - * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer. - */ - -enum ps3_lpm_rights { - PS3_LPM_RIGHTS_USE_LPM = 0x001, - PS3_LPM_RIGHTS_USE_TB = 0x100, -}; - -/** - * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use. - * - * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer. - * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer. Must have - * rights @PS3_LPM_RIGHTS_USE_TB. - */ - -enum ps3_lpm_tb_type { - PS3_LPM_TB_TYPE_NONE = 0, - PS3_LPM_TB_TYPE_INTERNAL = 1, -}; - -int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, - u64 tb_cache_size); -int ps3_lpm_close(void); -int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, - unsigned long *bytes_copied); -int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, - unsigned long count, unsigned long *bytes_copied); -void ps3_set_bookmark(u64 bookmark); -void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id); -int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit, - u8 bus_word); - -u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr); -void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); -u32 ps3_read_ctr(u32 cpu, u32 ctr); -void ps3_write_ctr(u32 cpu, u32 ctr, u32 val); - -u32 ps3_read_pm07_control(u32 cpu, u32 ctr); -void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val); -u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg); -void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); - -u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr); -void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); - -void ps3_enable_pm(u32 cpu); -void ps3_disable_pm(u32 cpu); -void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); -void ps3_disable_pm_interrupts(u32 cpu); - -u32 ps3_get_and_clear_pm_interrupts(u32 cpu); -void ps3_sync_irq(int node); -u32 ps3_get_hw_thread_id(int cpu); -u64 ps3_get_spe_id(void *arg); - -#endif diff --git a/include/asm-powerpc/ps3av.h b/include/asm-powerpc/ps3av.h deleted file mode 100644 index fda98715cd35..000000000000 --- a/include/asm-powerpc/ps3av.h +++ /dev/null @@ -1,744 +0,0 @@ -/* - * PS3 AV backend support. - * - * Copyright (C) 2007 Sony Computer Entertainment Inc. - * Copyright 2007 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_PS3AV_H_ -#define _ASM_POWERPC_PS3AV_H_ - -/** command for ioctl() **/ -#define PS3AV_VERSION 0x205 /* version of ps3av command */ - -#define PS3AV_CID_AV_INIT 0x00000001 -#define PS3AV_CID_AV_FIN 0x00000002 -#define PS3AV_CID_AV_GET_HW_CONF 0x00000003 -#define PS3AV_CID_AV_GET_MONITOR_INFO 0x00000004 -#define PS3AV_CID_AV_ENABLE_EVENT 0x00000006 -#define PS3AV_CID_AV_DISABLE_EVENT 0x00000007 -#define PS3AV_CID_AV_TV_MUTE 0x0000000a - -#define PS3AV_CID_AV_VIDEO_CS 0x00010001 -#define PS3AV_CID_AV_VIDEO_MUTE 0x00010002 -#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003 -#define PS3AV_CID_AV_AUDIO_PARAM 0x00020001 -#define PS3AV_CID_AV_AUDIO_MUTE 0x00020002 -#define PS3AV_CID_AV_HDMI_MODE 0x00040001 - -#define PS3AV_CID_VIDEO_INIT 0x01000001 -#define PS3AV_CID_VIDEO_MODE 0x01000002 -#define PS3AV_CID_VIDEO_FORMAT 0x01000004 -#define PS3AV_CID_VIDEO_PITCH 0x01000005 - -#define PS3AV_CID_AUDIO_INIT 0x02000001 -#define PS3AV_CID_AUDIO_MODE 0x02000002 -#define PS3AV_CID_AUDIO_MUTE 0x02000003 -#define PS3AV_CID_AUDIO_ACTIVE 0x02000004 -#define PS3AV_CID_AUDIO_INACTIVE 0x02000005 -#define PS3AV_CID_AUDIO_SPDIF_BIT 0x02000006 -#define PS3AV_CID_AUDIO_CTRL 0x02000007 - -#define PS3AV_CID_EVENT_UNPLUGGED 0x10000001 -#define PS3AV_CID_EVENT_PLUGGED 0x10000002 -#define PS3AV_CID_EVENT_HDCP_DONE 0x10000003 -#define PS3AV_CID_EVENT_HDCP_FAIL 0x10000004 -#define PS3AV_CID_EVENT_HDCP_AUTH 0x10000005 -#define PS3AV_CID_EVENT_HDCP_ERROR 0x10000006 - -#define PS3AV_CID_AVB_PARAM 0x04000001 - -/* max backend ports */ -#define PS3AV_HDMI_MAX 2 /* HDMI_0 HDMI_1 */ -#define PS3AV_AVMULTI_MAX 1 /* AVMULTI_0 */ -#define PS3AV_AV_PORT_MAX (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX) -#define PS3AV_OPT_PORT_MAX 1 /* SPDIF0 */ -#define PS3AV_HEAD_MAX 2 /* HEAD_A HEAD_B */ - -/* num of pkt for PS3AV_CID_AVB_PARAM */ -#define PS3AV_AVB_NUM_VIDEO PS3AV_HEAD_MAX -#define PS3AV_AVB_NUM_AUDIO 0 /* not supported */ -#define PS3AV_AVB_NUM_AV_VIDEO PS3AV_AV_PORT_MAX -#define PS3AV_AVB_NUM_AV_AUDIO PS3AV_HDMI_MAX - -#define PS3AV_MUTE_PORT_MAX 1 /* num of ports in mute pkt */ - -/* event_bit */ -#define PS3AV_CMD_EVENT_BIT_UNPLUGGED (1 << 0) -#define PS3AV_CMD_EVENT_BIT_PLUGGED (1 << 1) -#define PS3AV_CMD_EVENT_BIT_HDCP_DONE (1 << 2) -#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL (1 << 3) -#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH (1 << 4) -#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY (1 << 5) - -/* common params */ -/* mute */ -#define PS3AV_CMD_MUTE_OFF 0x0000 -#define PS3AV_CMD_MUTE_ON 0x0001 -/* avport */ -#define PS3AV_CMD_AVPORT_HDMI_0 0x0000 -#define PS3AV_CMD_AVPORT_HDMI_1 0x0001 -#define PS3AV_CMD_AVPORT_AVMULTI_0 0x0010 -#define PS3AV_CMD_AVPORT_SPDIF_0 0x0020 -#define PS3AV_CMD_AVPORT_SPDIF_1 0x0021 - -/* for av backend */ -/* av_mclk */ -#define PS3AV_CMD_AV_MCLK_128 0x0000 -#define PS3AV_CMD_AV_MCLK_256 0x0001 -#define PS3AV_CMD_AV_MCLK_512 0x0003 -/* av_inputlen */ -#define PS3AV_CMD_AV_INPUTLEN_16 0x02 -#define PS3AV_CMD_AV_INPUTLEN_20 0x0a -#define PS3AV_CMD_AV_INPUTLEN_24 0x0b -/* alayout */ -#define PS3AV_CMD_AV_LAYOUT_32 (1 << 0) -#define PS3AV_CMD_AV_LAYOUT_44 (1 << 1) -#define PS3AV_CMD_AV_LAYOUT_48 (1 << 2) -#define PS3AV_CMD_AV_LAYOUT_88 (1 << 3) -#define PS3AV_CMD_AV_LAYOUT_96 (1 << 4) -#define PS3AV_CMD_AV_LAYOUT_176 (1 << 5) -#define PS3AV_CMD_AV_LAYOUT_192 (1 << 6) -/* hdmi_mode */ -#define PS3AV_CMD_AV_HDMI_MODE_NORMAL 0xff -#define PS3AV_CMD_AV_HDMI_HDCP_OFF 0x01 -#define PS3AV_CMD_AV_HDMI_EDID_PASS 0x80 -#define PS3AV_CMD_AV_HDMI_DVI 0x40 - -/* for video module */ -/* video_head */ -#define PS3AV_CMD_VIDEO_HEAD_A 0x0000 -#define PS3AV_CMD_VIDEO_HEAD_B 0x0001 -/* video_cs_out video_cs_in */ -#define PS3AV_CMD_VIDEO_CS_NONE 0x0000 -#define PS3AV_CMD_VIDEO_CS_RGB_8 0x0001 -#define PS3AV_CMD_VIDEO_CS_YUV444_8 0x0002 -#define PS3AV_CMD_VIDEO_CS_YUV422_8 0x0003 -#define PS3AV_CMD_VIDEO_CS_XVYCC_8 0x0004 -#define PS3AV_CMD_VIDEO_CS_RGB_10 0x0005 -#define PS3AV_CMD_VIDEO_CS_YUV444_10 0x0006 -#define PS3AV_CMD_VIDEO_CS_YUV422_10 0x0007 -#define PS3AV_CMD_VIDEO_CS_XVYCC_10 0x0008 -#define PS3AV_CMD_VIDEO_CS_RGB_12 0x0009 -#define PS3AV_CMD_VIDEO_CS_YUV444_12 0x000a -#define PS3AV_CMD_VIDEO_CS_YUV422_12 0x000b -#define PS3AV_CMD_VIDEO_CS_XVYCC_12 0x000c -/* video_vid */ -#define PS3AV_CMD_VIDEO_VID_NONE 0x0000 -#define PS3AV_CMD_VIDEO_VID_480I 0x0001 -#define PS3AV_CMD_VIDEO_VID_576I 0x0003 -#define PS3AV_CMD_VIDEO_VID_480P 0x0005 -#define PS3AV_CMD_VIDEO_VID_576P 0x0006 -#define PS3AV_CMD_VIDEO_VID_1080I_60HZ 0x0007 -#define PS3AV_CMD_VIDEO_VID_1080I_50HZ 0x0008 -#define PS3AV_CMD_VIDEO_VID_720P_60HZ 0x0009 -#define PS3AV_CMD_VIDEO_VID_720P_50HZ 0x000a -#define PS3AV_CMD_VIDEO_VID_1080P_60HZ 0x000b -#define PS3AV_CMD_VIDEO_VID_1080P_50HZ 0x000c -#define PS3AV_CMD_VIDEO_VID_WXGA 0x000d -#define PS3AV_CMD_VIDEO_VID_SXGA 0x000e -#define PS3AV_CMD_VIDEO_VID_WUXGA 0x000f -#define PS3AV_CMD_VIDEO_VID_480I_A 0x0010 -/* video_format */ -#define PS3AV_CMD_VIDEO_FORMAT_BLACK 0x0000 -#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT 0x0007 -/* video_order */ -#define PS3AV_CMD_VIDEO_ORDER_RGB 0x0000 -#define PS3AV_CMD_VIDEO_ORDER_BGR 0x0001 -/* video_fmt */ -#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8 0x0000 -/* video_out_format */ -#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT 0x0000 -/* video_cl_cnv */ -#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT 0x0000 -#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT 0x0010 -/* video_sync */ -#define PS3AV_CMD_VIDEO_SYNC_VSYNC 0x0001 -#define PS3AV_CMD_VIDEO_SYNC_CSYNC 0x0004 -#define PS3AV_CMD_VIDEO_SYNC_HSYNC 0x0010 - -/* for audio module */ -/* num_of_ch */ -#define PS3AV_CMD_AUDIO_NUM_OF_CH_2 0x0000 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_3 0x0001 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_4 0x0002 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_5 0x0003 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_6 0x0004 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_7 0x0005 -#define PS3AV_CMD_AUDIO_NUM_OF_CH_8 0x0006 -/* audio_fs */ -#define PS3AV_CMD_AUDIO_FS_32K 0x0001 -#define PS3AV_CMD_AUDIO_FS_44K 0x0002 -#define PS3AV_CMD_AUDIO_FS_48K 0x0003 -#define PS3AV_CMD_AUDIO_FS_88K 0x0004 -#define PS3AV_CMD_AUDIO_FS_96K 0x0005 -#define PS3AV_CMD_AUDIO_FS_176K 0x0006 -#define PS3AV_CMD_AUDIO_FS_192K 0x0007 -/* audio_word_bits */ -#define PS3AV_CMD_AUDIO_WORD_BITS_16 0x0001 -#define PS3AV_CMD_AUDIO_WORD_BITS_20 0x0002 -#define PS3AV_CMD_AUDIO_WORD_BITS_24 0x0003 -/* audio_format */ -#define PS3AV_CMD_AUDIO_FORMAT_PCM 0x0001 -#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM 0x00ff -/* audio_source */ -#define PS3AV_CMD_AUDIO_SOURCE_SERIAL 0x0000 -#define PS3AV_CMD_AUDIO_SOURCE_SPDIF 0x0001 -/* audio_swap */ -#define PS3AV_CMD_AUDIO_SWAP_0 0x0000 -#define PS3AV_CMD_AUDIO_SWAP_1 0x0000 -/* audio_map */ -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0 0x0000 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1 0x0001 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2 0x0002 -#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3 0x0003 -/* audio_layout */ -#define PS3AV_CMD_AUDIO_LAYOUT_2CH 0x0000 -#define PS3AV_CMD_AUDIO_LAYOUT_6CH 0x000b /* LREClr */ -#define PS3AV_CMD_AUDIO_LAYOUT_8CH 0x001f /* LREClrXY */ -/* audio_downmix */ -#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED 0x0000 -#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED 0x0001 - -/* audio_port */ -#define PS3AV_CMD_AUDIO_PORT_HDMI_0 ( 1 << 0 ) -#define PS3AV_CMD_AUDIO_PORT_HDMI_1 ( 1 << 1 ) -#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0 ( 1 << 10 ) -#define PS3AV_CMD_AUDIO_PORT_SPDIF_0 ( 1 << 20 ) -#define PS3AV_CMD_AUDIO_PORT_SPDIF_1 ( 1 << 21 ) - -/* audio_ctrl_id */ -#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS 0x0001 -#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK 0x0002 -/* audio_ctrl_data[0] reset */ -#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT 0x0001 -/* audio_ctrl_data[0] de-emphasis */ -#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON 0x0001 -/* audio_ctrl_data[0] avclk */ -#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22 0x0000 -#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18 0x0001 - -/* av_vid */ -/* do not use these params directly, use vid_video2av */ -#define PS3AV_CMD_AV_VID_480I 0x0000 -#define PS3AV_CMD_AV_VID_480P 0x0001 -#define PS3AV_CMD_AV_VID_720P_60HZ 0x0002 -#define PS3AV_CMD_AV_VID_1080I_60HZ 0x0003 -#define PS3AV_CMD_AV_VID_1080P_60HZ 0x0004 -#define PS3AV_CMD_AV_VID_576I 0x0005 -#define PS3AV_CMD_AV_VID_576P 0x0006 -#define PS3AV_CMD_AV_VID_720P_50HZ 0x0007 -#define PS3AV_CMD_AV_VID_1080I_50HZ 0x0008 -#define PS3AV_CMD_AV_VID_1080P_50HZ 0x0009 -#define PS3AV_CMD_AV_VID_WXGA 0x000a -#define PS3AV_CMD_AV_VID_SXGA 0x000b -#define PS3AV_CMD_AV_VID_WUXGA 0x000c -/* av_cs_out av_cs_in */ -/* use cs_video2av() */ -#define PS3AV_CMD_AV_CS_RGB_8 0x0000 -#define PS3AV_CMD_AV_CS_YUV444_8 0x0001 -#define PS3AV_CMD_AV_CS_YUV422_8 0x0002 -#define PS3AV_CMD_AV_CS_XVYCC_8 0x0003 -#define PS3AV_CMD_AV_CS_RGB_10 0x0004 -#define PS3AV_CMD_AV_CS_YUV444_10 0x0005 -#define PS3AV_CMD_AV_CS_YUV422_10 0x0006 -#define PS3AV_CMD_AV_CS_XVYCC_10 0x0007 -#define PS3AV_CMD_AV_CS_RGB_12 0x0008 -#define PS3AV_CMD_AV_CS_YUV444_12 0x0009 -#define PS3AV_CMD_AV_CS_YUV422_12 0x000a -#define PS3AV_CMD_AV_CS_XVYCC_12 0x000b -#define PS3AV_CMD_AV_CS_8 0x0000 -#define PS3AV_CMD_AV_CS_10 0x0001 -#define PS3AV_CMD_AV_CS_12 0x0002 -/* dither */ -#define PS3AV_CMD_AV_DITHER_OFF 0x0000 -#define PS3AV_CMD_AV_DITHER_ON 0x0001 -#define PS3AV_CMD_AV_DITHER_8BIT 0x0000 -#define PS3AV_CMD_AV_DITHER_10BIT 0x0002 -#define PS3AV_CMD_AV_DITHER_12BIT 0x0004 -/* super_white */ -#define PS3AV_CMD_AV_SUPER_WHITE_OFF 0x0000 -#define PS3AV_CMD_AV_SUPER_WHITE_ON 0x0001 -/* aspect */ -#define PS3AV_CMD_AV_ASPECT_16_9 0x0000 -#define PS3AV_CMD_AV_ASPECT_4_3 0x0001 -/* video_cs_cnv() */ -#define PS3AV_CMD_VIDEO_CS_RGB 0x0001 -#define PS3AV_CMD_VIDEO_CS_YUV422 0x0002 -#define PS3AV_CMD_VIDEO_CS_YUV444 0x0003 - -/* for broadcast automode */ -#define PS3AV_RESBIT_720x480P 0x0003 /* 0x0001 | 0x0002 */ -#define PS3AV_RESBIT_720x576P 0x0003 /* 0x0001 | 0x0002 */ -#define PS3AV_RESBIT_1280x720P 0x0004 -#define PS3AV_RESBIT_1920x1080I 0x0008 -#define PS3AV_RESBIT_1920x1080P 0x4000 -#define PS3AV_RES_MASK_60 (PS3AV_RESBIT_720x480P \ - | PS3AV_RESBIT_1280x720P \ - | PS3AV_RESBIT_1920x1080I \ - | PS3AV_RESBIT_1920x1080P) -#define PS3AV_RES_MASK_50 (PS3AV_RESBIT_720x576P \ - | PS3AV_RESBIT_1280x720P \ - | PS3AV_RESBIT_1920x1080I \ - | PS3AV_RESBIT_1920x1080P) - -/* for VESA automode */ -#define PS3AV_RESBIT_VGA 0x0001 -#define PS3AV_RESBIT_WXGA 0x0002 -#define PS3AV_RESBIT_SXGA 0x0004 -#define PS3AV_RESBIT_WUXGA 0x0008 -#define PS3AV_RES_MASK_VESA (PS3AV_RESBIT_WXGA |\ - PS3AV_RESBIT_SXGA |\ - PS3AV_RESBIT_WUXGA) - -#define PS3AV_MONITOR_TYPE_HDMI 1 /* HDMI */ -#define PS3AV_MONITOR_TYPE_DVI 2 /* DVI */ - - -/* for video mode */ -enum ps3av_mode_num { - PS3AV_MODE_AUTO = 0, - PS3AV_MODE_480I = 1, - PS3AV_MODE_480P = 2, - PS3AV_MODE_720P60 = 3, - PS3AV_MODE_1080I60 = 4, - PS3AV_MODE_1080P60 = 5, - PS3AV_MODE_576I = 6, - PS3AV_MODE_576P = 7, - PS3AV_MODE_720P50 = 8, - PS3AV_MODE_1080I50 = 9, - PS3AV_MODE_1080P50 = 10, - PS3AV_MODE_WXGA = 11, - PS3AV_MODE_SXGA = 12, - PS3AV_MODE_WUXGA = 13, -}; - -#define PS3AV_MODE_MASK 0x000F -#define PS3AV_MODE_HDCP_OFF 0x1000 /* Retail PS3 product doesn't support this */ -#define PS3AV_MODE_DITHER 0x0800 -#define PS3AV_MODE_COLOR 0x0400 -#define PS3AV_MODE_WHITE 0x0200 -#define PS3AV_MODE_FULL 0x0080 -#define PS3AV_MODE_DVI 0x0040 -#define PS3AV_MODE_RGB 0x0020 - - -#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60 PS3AV_MODE_480P -#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60 PS3AV_MODE_480I -#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50 PS3AV_MODE_576P -#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50 PS3AV_MODE_576I - -#define PS3AV_REGION_60 0x01 -#define PS3AV_REGION_50 0x02 -#define PS3AV_REGION_RGB 0x10 - -#define get_status(buf) (((__u32 *)buf)[2]) -#define PS3AV_HDR_SIZE 4 /* version + size */ - - -/** command packet structure **/ -struct ps3av_send_hdr { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ -}; - -struct ps3av_reply_hdr { - u16 version; - u16 size; - u32 cid; - u32 status; -}; - -/* backend: initialization */ -struct ps3av_pkt_av_init { - struct ps3av_send_hdr send_hdr; - u32 event_bit; -}; - -/* backend: finalize */ -struct ps3av_pkt_av_fin { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* backend: get port */ -struct ps3av_pkt_av_get_hw_conf { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 status; - u16 num_of_hdmi; /* out: number of hdmi */ - u16 num_of_avmulti; /* out: number of avmulti */ - u16 num_of_spdif; /* out: number of hdmi */ - u16 reserved; -}; - -/* backend: get monitor info */ -struct ps3av_info_resolution { - u32 res_bits; - u32 native; -}; - -struct ps3av_info_cs { - u8 rgb; - u8 yuv444; - u8 yuv422; - u8 reserved; -}; - -struct ps3av_info_color { - u16 red_x; - u16 red_y; - u16 green_x; - u16 green_y; - u16 blue_x; - u16 blue_y; - u16 white_x; - u16 white_y; - u32 gamma; -}; - -struct ps3av_info_audio { - u8 type; - u8 max_num_of_ch; - u8 fs; - u8 sbit; -}; - -struct ps3av_info_monitor { - u8 avport; - u8 monitor_id[10]; - u8 monitor_type; - u8 monitor_name[16]; - struct ps3av_info_resolution res_60; - struct ps3av_info_resolution res_50; - struct ps3av_info_resolution res_other; - struct ps3av_info_resolution res_vesa; - struct ps3av_info_cs cs; - struct ps3av_info_color color; - u8 supported_ai; - u8 speaker_info; - u8 num_of_audio_block; - struct ps3av_info_audio audio[0]; /* 0 or more audio blocks */ - u8 reserved[169]; -} __attribute__ ((packed)); - -struct ps3av_pkt_av_get_monitor_info { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; - /* recv */ - struct ps3av_info_monitor info; /* out: monitor info */ -}; - -/* backend: enable/disable event */ -struct ps3av_pkt_av_event { - struct ps3av_send_hdr send_hdr; - u32 event_bit; /* in */ -}; - -/* backend: video cs param */ -struct ps3av_pkt_av_video_cs { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 av_vid; /* in: video resolution */ - u16 av_cs_out; /* in: output color space */ - u16 av_cs_in; /* in: input color space */ - u8 dither; /* in: dither bit length */ - u8 bitlen_out; /* in: bit length */ - u8 super_white; /* in: super white */ - u8 aspect; /* in: aspect ratio */ -}; - -/* backend: video mute */ -struct ps3av_av_mute { - u16 avport; /* in: avport */ - u16 mute; /* in: mute on/off */ -}; - -struct ps3av_pkt_av_video_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; -}; - -/* backend: video disable signal */ -struct ps3av_pkt_av_video_disable_sig { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; -}; - -/* backend: audio param */ -struct ps3av_audio_info_frame { - struct pb1_bit { - u8 ct:4; - u8 rsv:1; - u8 cc:3; - } pb1; - struct pb2_bit { - u8 rsv:3; - u8 sf:3; - u8 ss:2; - } pb2; - u8 pb3; - u8 pb4; - struct pb5_bit { - u8 dm:1; - u8 lsv:4; - u8 rsv:3; - } pb5; -}; - -struct ps3av_pkt_av_audio_param { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport */ - u16 reserved; - u8 mclk; /* in: audio mclk */ - u8 ns[3]; /* in: audio ns val */ - u8 enable; /* in: audio enable */ - u8 swaplr; /* in: audio swap */ - u8 fifomap; /* in: audio fifomap */ - u8 inputctrl; /* in: audio input ctrl */ - u8 inputlen; /* in: sample bit size */ - u8 layout; /* in: speaker layout param */ - struct ps3av_audio_info_frame info; /* in: info */ - u8 chstat[5]; /* in: ch stat */ -}; - -/* backend: audio_mute */ -struct ps3av_pkt_av_audio_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; -}; - -/* backend: hdmi_mode */ -struct ps3av_pkt_av_hdmi_mode { - struct ps3av_send_hdr send_hdr; - u8 mode; /* in: hdmi_mode */ - u8 reserved0; - u8 reserved1; - u8 reserved2; -}; - -/* backend: tv_mute */ -struct ps3av_pkt_av_tv_mute { - struct ps3av_send_hdr send_hdr; - u16 avport; /* in: avport HDMI only */ - u16 mute; /* in: mute */ -}; - -/* video: initialize */ -struct ps3av_pkt_video_init { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* video: mode setting */ -struct ps3av_pkt_video_mode { - struct ps3av_send_hdr send_hdr; - u32 video_head; /* in: head */ - u32 reserved; - u32 video_vid; /* in: video resolution */ - u16 reserved1; - u16 width; /* in: width in pixel */ - u16 reserved2; - u16 height; /* in: height in pixel */ - u32 pitch; /* in: line size in byte */ - u32 video_out_format; /* in: out format */ - u32 video_format; /* in: input frame buffer format */ - u8 reserved3; - u8 video_cl_cnv; /* in: color conversion */ - u16 video_order; /* in: input RGB order */ - u32 reserved4; -}; - -/* video: format */ -struct ps3av_pkt_video_format { - struct ps3av_send_hdr send_hdr; - u32 video_head; /* in: head */ - u32 video_format; /* in: frame buffer format */ - u8 reserved; - u8 video_cl_cnv; /* in: color conversion */ - u16 video_order; /* in: input RGB order */ -}; - -/* video: pitch */ -struct ps3av_pkt_video_pitch { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u32 video_head; /* in: head */ - u32 pitch; /* in: line size in byte */ -}; - -/* audio: initialize */ -struct ps3av_pkt_audio_init { - struct ps3av_send_hdr send_hdr; - /* recv */ - u32 reserved; -}; - -/* audio: mode setting */ -struct ps3av_pkt_audio_mode { - struct ps3av_send_hdr send_hdr; - u8 avport; /* in: avport */ - u8 reserved0[3]; - u32 mask; /* in: mask */ - u32 audio_num_of_ch; /* in: number of ch */ - u32 audio_fs; /* in: sampling freq */ - u32 audio_word_bits; /* in: sample bit size */ - u32 audio_format; /* in: audio output format */ - u32 audio_source; /* in: audio source */ - u8 audio_enable[4]; /* in: audio enable */ - u8 audio_swap[4]; /* in: audio swap */ - u8 audio_map[4]; /* in: audio map */ - u32 audio_layout; /* in: speaker layout */ - u32 audio_downmix; /* in: audio downmix permission */ - u32 audio_downmix_level; - u8 audio_cs_info[8]; /* in: IEC channel status */ -}; - -/* audio: mute */ -struct ps3av_audio_mute { - u8 avport; /* in: opt_port optical */ - u8 reserved[3]; - u32 mute; /* in: mute */ -}; - -struct ps3av_pkt_audio_mute { - struct ps3av_send_hdr send_hdr; - struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX]; -}; - -/* audio: active/inactive */ -struct ps3av_pkt_audio_active { - struct ps3av_send_hdr send_hdr; - u32 audio_port; /* in: audio active/inactive port */ -}; - -/* audio: SPDIF user bit */ -struct ps3av_pkt_audio_spdif_bit { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u8 avport; /* in: avport SPDIF only */ - u8 reserved[3]; - u32 audio_port; /* in: SPDIF only */ - u32 spdif_bit_data[12]; /* in: user bit data */ -}; - -/* audio: audio control */ -struct ps3av_pkt_audio_ctrl { - u16 version; - u16 size; /* size of command packet */ - u32 cid; /* command id */ - u32 audio_ctrl_id; /* in: control id */ - u32 audio_ctrl_data[4]; /* in: control data */ -}; - -/* avb:param */ -#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE \ - (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \ - PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \ - PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \ - PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param)) - -struct ps3av_pkt_avb_param { - struct ps3av_send_hdr send_hdr; - u16 num_of_video_pkt; - u16 num_of_audio_pkt; - u16 num_of_av_video_pkt; - u16 num_of_av_audio_pkt; - /* - * The actual buffer layout depends on the fields above: - * - * struct ps3av_pkt_video_mode video[num_of_video_pkt]; - * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt]; - * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt]; - * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt]; - */ - u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE]; -}; - - -/** command status **/ -#define PS3AV_STATUS_SUCCESS 0x0000 /* success */ -#define PS3AV_STATUS_RECEIVE_VUART_ERROR 0x0001 /* receive vuart error */ -#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL 0x0002 /* syscon communication error */ -#define PS3AV_STATUS_INVALID_COMMAND 0x0003 /* obsolete invalid CID */ -#define PS3AV_STATUS_INVALID_PORT 0x0004 /* invalid port number */ -#define PS3AV_STATUS_INVALID_VID 0x0005 /* invalid video format */ -#define PS3AV_STATUS_INVALID_COLOR_SPACE 0x0006 /* invalid video colose space */ -#define PS3AV_STATUS_INVALID_FS 0x0007 /* invalid audio sampling freq */ -#define PS3AV_STATUS_INVALID_AUDIO_CH 0x0008 /* invalid audio channel number */ -#define PS3AV_STATUS_UNSUPPORTED_VERSION 0x0009 /* version mismatch */ -#define PS3AV_STATUS_INVALID_SAMPLE_SIZE 0x000a /* invalid audio sample bit size */ -#define PS3AV_STATUS_FAILURE 0x000b /* other failures */ -#define PS3AV_STATUS_UNSUPPORTED_COMMAND 0x000c /* unsupported cid */ -#define PS3AV_STATUS_BUFFER_OVERFLOW 0x000d /* write buffer overflow */ -#define PS3AV_STATUS_INVALID_VIDEO_PARAM 0x000e /* invalid video param */ -#define PS3AV_STATUS_NO_SEL 0x000f /* not exist selector */ -#define PS3AV_STATUS_INVALID_AV_PARAM 0x0010 /* invalid backend param */ -#define PS3AV_STATUS_INVALID_AUDIO_PARAM 0x0011 /* invalid audio param */ -#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE 0x0012 /* unsupported hdmi mode */ -#define PS3AV_STATUS_NO_SYNC_HEAD 0x0013 /* sync head failed */ - -extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *); -extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *); - -extern int ps3av_cmd_init(void); -extern int ps3av_cmd_fin(void); -extern int ps3av_cmd_av_video_mute(int, u32 *, u32); -extern int ps3av_cmd_av_video_disable_sig(u32); -extern int ps3av_cmd_av_tv_mute(u32, u32); -extern int ps3av_cmd_enable_event(void); -extern int ps3av_cmd_av_hdmi_mode(u8); -extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32); -extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32); -extern int ps3av_cmd_video_format_black(u32, u32, u32); -extern int ps3av_cmd_av_audio_mute(int, u32 *, u32); -extern u32 ps3av_cmd_set_av_audio_param(void *, u32, - const struct ps3av_pkt_audio_mode *, - u32); -extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32, - u32, u32, u32, u32); -extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *); -extern int ps3av_cmd_audio_mute(int, u32 *, u32); -extern int ps3av_cmd_audio_active(int, u32); -extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32); -extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *); -extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *, - u32); - -extern int ps3av_set_video_mode(u32); -extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32); -extern int ps3av_get_auto_mode(void); -extern int ps3av_get_mode(void); -extern int ps3av_video_mode2res(u32, u32 *, u32 *); -extern int ps3av_video_mute(int); -extern int ps3av_audio_mute(int); -extern int ps3av_dev_open(void); -extern int ps3av_dev_close(void); -extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data), - void *flip_data); -extern void ps3av_flip_ctl(int on); - -#endif /* _ASM_POWERPC_PS3AV_H_ */ diff --git a/include/asm-powerpc/ps3fb.h b/include/asm-powerpc/ps3fb.h deleted file mode 100644 index 3f121fe4010d..000000000000 --- a/include/asm-powerpc/ps3fb.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 2006 Sony Computer Entertainment Inc. - * Copyright 2006, 2007 Sony Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published - * by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef _ASM_POWERPC_PS3FB_H_ -#define _ASM_POWERPC_PS3FB_H_ - -#include - -/* ioctl */ -#define PS3FB_IOCTL_SETMODE _IOW('r', 1, int) /* set video mode */ -#define PS3FB_IOCTL_GETMODE _IOR('r', 2, int) /* get video mode */ -#define PS3FB_IOCTL_SCREENINFO _IOR('r', 3, int) /* get screen info */ -#define PS3FB_IOCTL_ON _IO('r', 4) /* use IOCTL_FSEL */ -#define PS3FB_IOCTL_OFF _IO('r', 5) /* return to normal-flip */ -#define PS3FB_IOCTL_FSEL _IOW('r', 6, int) /* blit and flip request */ - -#ifndef FBIO_WAITFORVSYNC -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) /* wait for vsync */ -#endif - -struct ps3fb_ioctl_res { - __u32 xres; /* frame buffer x_size */ - __u32 yres; /* frame buffer y_size */ - __u32 xoff; /* margine x */ - __u32 yoff; /* margine y */ - __u32 num_frames; /* num of frame buffers */ -}; - -#endif /* _ASM_POWERPC_PS3FB_H_ */ diff --git a/include/asm-powerpc/ps3stor.h b/include/asm-powerpc/ps3stor.h deleted file mode 100644 index 6fcaf714fa50..000000000000 --- a/include/asm-powerpc/ps3stor.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * PS3 Storage Devices - * - * Copyright (C) 2007 Sony Computer Entertainment Inc. - * Copyright 2007 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published - * by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef _ASM_POWERPC_PS3STOR_H_ -#define _ASM_POWERPC_PS3STOR_H_ - -#include - -#include - - -struct ps3_storage_region { - unsigned int id; - u64 start; - u64 size; -}; - -struct ps3_storage_device { - struct ps3_system_bus_device sbd; - - struct ps3_dma_region dma_region; - unsigned int irq; - u64 blk_size; - - u64 tag; - u64 lv1_status; - struct completion done; - - unsigned long bounce_size; - void *bounce_buf; - u64 bounce_lpar; - dma_addr_t bounce_dma; - - unsigned int num_regions; - unsigned long accessible_regions; - unsigned int region_idx; /* first accessible region */ - struct ps3_storage_region regions[0]; /* Must be last */ -}; - -static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev) -{ - return container_of(dev, struct ps3_storage_device, sbd.core); -} - -extern int ps3stor_setup(struct ps3_storage_device *dev, - irq_handler_t handler); -extern void ps3stor_teardown(struct ps3_storage_device *dev); -extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, - u64 start_sector, u64 sectors, - int write); -extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, - u64 arg1, u64 arg2, u64 arg3, u64 arg4); - -#endif /* _ASM_POWERPC_PS3STOR_H_ */ diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h deleted file mode 100644 index 734e0754fb9b..000000000000 --- a/include/asm-powerpc/ptrace.h +++ /dev/null @@ -1,293 +0,0 @@ -#ifndef _ASM_POWERPC_PTRACE_H -#define _ASM_POWERPC_PTRACE_H - -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - * - * this should only contain volatile regs - * since we can keep non-volatile in the thread_struct - * should set this up when only volatiles are saved - * by intr code. - * - * Since this is going on the stack, *CARE MUST BE TAKEN* to insure - * that the overall structure is a multiple of 16 bytes in length. - * - * Note that the offsets of the fields in this struct correspond with - * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASSEMBLY__ - -struct pt_regs { - unsigned long gpr[32]; - unsigned long nip; - unsigned long msr; - unsigned long orig_gpr3; /* Used for restarting system calls */ - unsigned long ctr; - unsigned long link; - unsigned long xer; - unsigned long ccr; -#ifdef __powerpc64__ - unsigned long softe; /* Soft enabled/disabled */ -#else - unsigned long mq; /* 601 only (not used at present) */ - /* Used on APUS to hold IPL value. */ -#endif - unsigned long trap; /* Reason for being here */ - /* N.B. for critical exceptions on 4xx, the dar and dsisr - fields are overloaded to hold srr0 and srr1. */ - unsigned long dar; /* Fault registers */ - unsigned long dsisr; /* on 4xx/Book-E used for ESR */ - unsigned long result; /* Result of a system call */ -}; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ - -#ifdef __powerpc64__ - -#define __ARCH_WANT_COMPAT_SYS_PTRACE - -#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ -#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ -#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) -#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ - STACK_FRAME_OVERHEAD + 288) -#define STACK_FRAME_MARKER 12 - -/* Size of dummy stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 128 -#define __SIGNAL_FRAMESIZE32 64 - -#else /* __powerpc64__ */ - -#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ -#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ -#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) -#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) -#define STACK_FRAME_MARKER 2 - -/* Size of stack frame allocated when calling signal handler. */ -#define __SIGNAL_FRAMESIZE 64 - -#endif /* __powerpc64__ */ - -#ifndef __ASSEMBLY__ - -#define instruction_pointer(regs) ((regs)->nip) -#define user_stack_pointer(regs) ((regs)->gpr[1]) -#define regs_return_value(regs) ((regs)->gpr[3]) - -#ifdef CONFIG_SMP -extern unsigned long profile_pc(struct pt_regs *regs); -#else -#define profile_pc(regs) instruction_pointer(regs) -#endif - -#ifdef __powerpc64__ -#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) -#else -#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) -#endif - -#define force_successful_syscall_return() \ - do { \ - set_thread_flag(TIF_NOERROR); \ - } while(0) - -struct task_struct; -extern unsigned long ptrace_get_reg(struct task_struct *task, int regno); -extern int ptrace_put_reg(struct task_struct *task, int regno, - unsigned long data); - -/* - * We use the least-significant bit of the trap field to indicate - * whether we have saved the full set of registers, or only a - * partial set. A 1 there means the partial set. - * On 4xx we use the next bit to indicate whether the exception - * is a critical exception (1 means it is). - */ -#define FULL_REGS(regs) (((regs)->trap & 1) == 0) -#ifndef __powerpc64__ -#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) -#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) -#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) -#endif /* ! __powerpc64__ */ -#define TRAP(regs) ((regs)->trap & ~0xF) -#ifdef __powerpc64__ -#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) -#else -#define CHECK_FULL_REGS(regs) \ -do { \ - if ((regs)->trap & 1) \ - printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \ -} while (0) -#endif /* __powerpc64__ */ - -/* - * These are defined as per linux/ptrace.h, which see. - */ -#define arch_has_single_step() (1) -extern void user_enable_single_step(struct task_struct *); -extern void user_disable_single_step(struct task_struct *); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -/* - * Offsets used by 'ptrace' system call interface. - * These can't be changed without breaking binary compatibility - * with MkLinux, etc. - */ -#define PT_R0 0 -#define PT_R1 1 -#define PT_R2 2 -#define PT_R3 3 -#define PT_R4 4 -#define PT_R5 5 -#define PT_R6 6 -#define PT_R7 7 -#define PT_R8 8 -#define PT_R9 9 -#define PT_R10 10 -#define PT_R11 11 -#define PT_R12 12 -#define PT_R13 13 -#define PT_R14 14 -#define PT_R15 15 -#define PT_R16 16 -#define PT_R17 17 -#define PT_R18 18 -#define PT_R19 19 -#define PT_R20 20 -#define PT_R21 21 -#define PT_R22 22 -#define PT_R23 23 -#define PT_R24 24 -#define PT_R25 25 -#define PT_R26 26 -#define PT_R27 27 -#define PT_R28 28 -#define PT_R29 29 -#define PT_R30 30 -#define PT_R31 31 - -#define PT_NIP 32 -#define PT_MSR 33 -#define PT_ORIG_R3 34 -#define PT_CTR 35 -#define PT_LNK 36 -#define PT_XER 37 -#define PT_CCR 38 -#ifndef __powerpc64__ -#define PT_MQ 39 -#else -#define PT_SOFTE 39 -#endif -#define PT_TRAP 40 -#define PT_DAR 41 -#define PT_DSISR 42 -#define PT_RESULT 43 -#define PT_REGS_COUNT 44 - -#define PT_FPR0 48 /* each FP reg occupies 2 slots in this space */ - -#ifndef __powerpc64__ - -#define PT_FPR31 (PT_FPR0 + 2*31) -#define PT_FPSCR (PT_FPR0 + 2*32 + 1) - -#else /* __powerpc64__ */ - -#define PT_FPSCR (PT_FPR0 + 32) /* each FP reg occupies 1 slot in 64-bit space */ - -#ifdef __KERNEL__ -#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ -#endif - -#define PT_VR0 82 /* each Vector reg occupies 2 slots in 64-bit */ -#define PT_VSCR (PT_VR0 + 32*2 + 1) -#define PT_VRSAVE (PT_VR0 + 33*2) - -#ifdef __KERNEL__ -#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ -#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) -#define PT_VRSAVE_32 (PT_VR0 + 33*4) -#endif - -/* - * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 - */ -#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ -#define PT_VSR31 (PT_VSR0 + 2*31) -#ifdef __KERNEL__ -#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ -#endif -#endif /* __powerpc64__ */ - -/* - * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. - * The transfer totals 34 quadword. Quadwords 0-31 contain the - * corresponding vector registers. Quadword 32 contains the vscr as the - * last word (offset 12) within that quadword. Quadword 33 contains the - * vrsave as the first word (offset 0) within the quadword. - * - * This definition of the VMX state is compatible with the current PPC32 - * ptrace interface. This allows signal handling and ptrace to use the same - * structures. This also simplifies the implementation of a bi-arch - * (combined (32- and 64-bit) gdb. - */ -#define PTRACE_GETVRREGS 18 -#define PTRACE_SETVRREGS 19 - -/* Get/set all the upper 32-bits of the SPE registers, accumulator, and - * spefscr, in one go */ -#define PTRACE_GETEVRREGS 20 -#define PTRACE_SETEVRREGS 21 - -/* Get the first 32 128bit VSX registers */ -#define PTRACE_GETVSRREGS 27 -#define PTRACE_SETVSRREGS 28 - -/* - * Get or set a debug register. The first 16 are DABR registers and the - * second 16 are IABR registers. - */ -#define PTRACE_GET_DEBUGREG 25 -#define PTRACE_SET_DEBUGREG 26 - -/* (new) PTRACE requests using the same numbers as x86 and the same - * argument ordering. Additionally, they support more registers too - */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_GETREGS64 22 -#define PTRACE_SETREGS64 23 - -/* (old) PTRACE requests with inverted arguments */ -#define PPC_PTRACE_GETREGS 0x99 /* Get GPRs 0 - 31 */ -#define PPC_PTRACE_SETREGS 0x98 /* Set GPRs 0 - 31 */ -#define PPC_PTRACE_GETFPREGS 0x97 /* Get FPRs 0 - 31 */ -#define PPC_PTRACE_SETFPREGS 0x96 /* Set FPRs 0 - 31 */ - -/* Calls to trace a 64bit program from a 32bit program */ -#define PPC_PTRACE_PEEKTEXT_3264 0x95 -#define PPC_PTRACE_PEEKDATA_3264 0x94 -#define PPC_PTRACE_POKETEXT_3264 0x93 -#define PPC_PTRACE_POKEDATA_3264 0x92 -#define PPC_PTRACE_PEEKUSR_3264 0x91 -#define PPC_PTRACE_POKEUSR_3264 0x90 - -#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h deleted file mode 100644 index edee15d269ea..000000000000 --- a/include/asm-powerpc/qe.h +++ /dev/null @@ -1,642 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * QUICC Engine (QE) external definitions and structure. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_QE_H -#define _ASM_POWERPC_QE_H -#ifdef __KERNEL__ - -#include -#include -#include - -#define QE_NUM_OF_SNUM 28 -#define QE_NUM_OF_BRGS 16 -#define QE_NUM_OF_PORTS 1024 - -/* Memory partitions -*/ -#define MEM_PART_SYSTEM 0 -#define MEM_PART_SECONDARY 1 -#define MEM_PART_MURAM 2 - -/* Clocks and BRGs */ -enum qe_clock { - QE_CLK_NONE = 0, - QE_BRG1, /* Baud Rate Generator 1 */ - QE_BRG2, /* Baud Rate Generator 2 */ - QE_BRG3, /* Baud Rate Generator 3 */ - QE_BRG4, /* Baud Rate Generator 4 */ - QE_BRG5, /* Baud Rate Generator 5 */ - QE_BRG6, /* Baud Rate Generator 6 */ - QE_BRG7, /* Baud Rate Generator 7 */ - QE_BRG8, /* Baud Rate Generator 8 */ - QE_BRG9, /* Baud Rate Generator 9 */ - QE_BRG10, /* Baud Rate Generator 10 */ - QE_BRG11, /* Baud Rate Generator 11 */ - QE_BRG12, /* Baud Rate Generator 12 */ - QE_BRG13, /* Baud Rate Generator 13 */ - QE_BRG14, /* Baud Rate Generator 14 */ - QE_BRG15, /* Baud Rate Generator 15 */ - QE_BRG16, /* Baud Rate Generator 16 */ - QE_CLK1, /* Clock 1 */ - QE_CLK2, /* Clock 2 */ - QE_CLK3, /* Clock 3 */ - QE_CLK4, /* Clock 4 */ - QE_CLK5, /* Clock 5 */ - QE_CLK6, /* Clock 6 */ - QE_CLK7, /* Clock 7 */ - QE_CLK8, /* Clock 8 */ - QE_CLK9, /* Clock 9 */ - QE_CLK10, /* Clock 10 */ - QE_CLK11, /* Clock 11 */ - QE_CLK12, /* Clock 12 */ - QE_CLK13, /* Clock 13 */ - QE_CLK14, /* Clock 14 */ - QE_CLK15, /* Clock 15 */ - QE_CLK16, /* Clock 16 */ - QE_CLK17, /* Clock 17 */ - QE_CLK18, /* Clock 18 */ - QE_CLK19, /* Clock 19 */ - QE_CLK20, /* Clock 20 */ - QE_CLK21, /* Clock 21 */ - QE_CLK22, /* Clock 22 */ - QE_CLK23, /* Clock 23 */ - QE_CLK24, /* Clock 24 */ - QE_CLK_DUMMY -}; - -static inline bool qe_clock_is_brg(enum qe_clock clk) -{ - return clk >= QE_BRG1 && clk <= QE_BRG16; -} - -extern spinlock_t cmxgcr_lock; - -/* Export QE common operations */ -extern void __init qe_reset(void); - -/* QE PIO */ -#define QE_PIO_PINS 32 - -struct qe_pio_regs { - __be32 cpodr; /* Open drain register */ - __be32 cpdata; /* Data register */ - __be32 cpdir1; /* Direction register */ - __be32 cpdir2; /* Direction register */ - __be32 cppar1; /* Pin assignment register */ - __be32 cppar2; /* Pin assignment register */ -#ifdef CONFIG_PPC_85xx - u8 pad[8]; -#endif -}; - -extern int par_io_init(struct device_node *np); -extern int par_io_of_config(struct device_node *np); -#define QE_PIO_DIR_IN 2 -#define QE_PIO_DIR_OUT 1 -extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, - int dir, int open_drain, int assignment, - int has_irq); -extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, - int assignment, int has_irq); -extern int par_io_data_set(u8 port, u8 pin, u8 val); - -/* QE internal API */ -int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); -enum qe_clock qe_clock_source(const char *source); -unsigned int qe_get_brg_clk(void); -int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); -int qe_get_snum(void); -void qe_put_snum(u8 snum); -/* we actually use cpm_muram implementation, define this for convenience */ -#define qe_muram_init cpm_muram_init -#define qe_muram_alloc cpm_muram_alloc -#define qe_muram_alloc_fixed cpm_muram_alloc_fixed -#define qe_muram_free cpm_muram_free -#define qe_muram_addr cpm_muram_addr -#define qe_muram_offset cpm_muram_offset - -/* Structure that defines QE firmware binary files. - * - * See Documentation/powerpc/qe-firmware.txt for a description of these - * fields. - */ -struct qe_firmware { - struct qe_header { - __be32 length; /* Length of the entire structure, in bytes */ - u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ - u8 version; /* Version of this layout. First ver is '1' */ - } header; - u8 id[62]; /* Null-terminated identifier string */ - u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ - u8 count; /* Number of microcode[] structures */ - struct { - __be16 model; /* The SOC model */ - u8 major; /* The SOC revision major */ - u8 minor; /* The SOC revision minor */ - } __attribute__ ((packed)) soc; - u8 padding[4]; /* Reserved, for alignment */ - __be64 extended_modes; /* Extended modes */ - __be32 vtraps[8]; /* Virtual trap addresses */ - u8 reserved[4]; /* Reserved, for future expansion */ - struct qe_microcode { - u8 id[32]; /* Null-terminated identifier */ - __be32 traps[16]; /* Trap addresses, 0 == ignore */ - __be32 eccr; /* The value for the ECCR register */ - __be32 iram_offset; /* Offset into I-RAM for the code */ - __be32 count; /* Number of 32-bit words of the code */ - __be32 code_offset; /* Offset of the actual microcode */ - u8 major; /* The microcode version major */ - u8 minor; /* The microcode version minor */ - u8 revision; /* The microcode version revision */ - u8 padding; /* Reserved, for alignment */ - u8 reserved[4]; /* Reserved, for future expansion */ - } __attribute__ ((packed)) microcode[1]; - /* All microcode binaries should be located here */ - /* CRC32 should be located here, after the microcode binaries */ -} __attribute__ ((packed)); - -struct qe_firmware_info { - char id[64]; /* Firmware name */ - u32 vtraps[8]; /* Virtual trap addresses */ - u64 extended_modes; /* Extended modes */ -}; - -/* Upload a firmware to the QE */ -int qe_upload_firmware(const struct qe_firmware *firmware); - -/* Obtain information on the uploaded firmware */ -struct qe_firmware_info *qe_get_firmware_info(void); - -/* QE USB */ -int qe_usb_clock_set(enum qe_clock clk, int rate); - -/* Buffer descriptors */ -struct qe_bd { - __be16 status; - __be16 length; - __be32 buf; -} __attribute__ ((packed)); - -#define BD_STATUS_MASK 0xffff0000 -#define BD_LENGTH_MASK 0x0000ffff - -/* Alignment */ -#define QE_INTR_TABLE_ALIGN 16 /* ??? */ -#define QE_ALIGNMENT_OF_BD 8 -#define QE_ALIGNMENT_OF_PRAM 64 - -/* RISC allocation */ -enum qe_risc_allocation { - QE_RISC_ALLOCATION_RISC1 = 1, /* RISC 1 */ - QE_RISC_ALLOCATION_RISC2 = 2, /* RISC 2 */ - QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3 /* Dynamically choose - RISC 1 or RISC 2 */ -}; - -/* QE extended filtering Table Lookup Key Size */ -enum qe_fltr_tbl_lookup_key_size { - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES - = 0x3f, /* LookupKey parsed by the Generate LookupKey - CMD is truncated to 8 bytes */ - QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES - = 0x5f, /* LookupKey parsed by the Generate LookupKey - CMD is truncated to 16 bytes */ -}; - -/* QE FLTR extended filtering Largest External Table Lookup Key Size */ -enum qe_fltr_largest_external_tbl_lookup_key_size { - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE - = 0x0,/* not used */ - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES - = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ - QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES - = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ -}; - -/* structure representing QE parameter RAM */ -struct qe_timer_tables { - u16 tm_base; /* QE timer table base adr */ - u16 tm_ptr; /* QE timer table pointer */ - u16 r_tmr; /* QE timer mode register */ - u16 r_tmv; /* QE timer valid register */ - u32 tm_cmd; /* QE timer cmd register */ - u32 tm_cnt; /* QE timer internal cnt */ -} __attribute__ ((packed)); - -#define QE_FLTR_TAD_SIZE 8 - -/* QE extended filtering Termination Action Descriptor (TAD) */ -struct qe_fltr_tad { - u8 serialized[QE_FLTR_TAD_SIZE]; -} __attribute__ ((packed)); - -/* Communication Direction */ -enum comm_dir { - COMM_DIR_NONE = 0, - COMM_DIR_RX = 1, - COMM_DIR_TX = 2, - COMM_DIR_RX_AND_TX = 3 -}; - -/* QE CMXUCR Registers. - * There are two UCCs represented in each of the four CMXUCR registers. - * These values are for the UCC in the LSBs - */ -#define QE_CMXUCR_MII_ENET_MNG 0x00007000 -#define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 -#define QE_CMXUCR_GRANT 0x00008000 -#define QE_CMXUCR_TSA 0x00004000 -#define QE_CMXUCR_BKPT 0x00000100 -#define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F - -/* QE CMXGCR Registers. -*/ -#define QE_CMXGCR_MII_ENET_MNG 0x00007000 -#define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 -#define QE_CMXGCR_USBCS 0x0000000f -#define QE_CMXGCR_USBCS_CLK3 0x1 -#define QE_CMXGCR_USBCS_CLK5 0x2 -#define QE_CMXGCR_USBCS_CLK7 0x3 -#define QE_CMXGCR_USBCS_CLK9 0x4 -#define QE_CMXGCR_USBCS_CLK13 0x5 -#define QE_CMXGCR_USBCS_CLK17 0x6 -#define QE_CMXGCR_USBCS_CLK19 0x7 -#define QE_CMXGCR_USBCS_CLK21 0x8 -#define QE_CMXGCR_USBCS_BRG9 0x9 -#define QE_CMXGCR_USBCS_BRG10 0xa - -/* QE CECR Commands. -*/ -#define QE_CR_FLG 0x00010000 -#define QE_RESET 0x80000000 -#define QE_INIT_TX_RX 0x00000000 -#define QE_INIT_RX 0x00000001 -#define QE_INIT_TX 0x00000002 -#define QE_ENTER_HUNT_MODE 0x00000003 -#define QE_STOP_TX 0x00000004 -#define QE_GRACEFUL_STOP_TX 0x00000005 -#define QE_RESTART_TX 0x00000006 -#define QE_CLOSE_RX_BD 0x00000007 -#define QE_SWITCH_COMMAND 0x00000007 -#define QE_SET_GROUP_ADDRESS 0x00000008 -#define QE_START_IDMA 0x00000009 -#define QE_MCC_STOP_RX 0x00000009 -#define QE_ATM_TRANSMIT 0x0000000a -#define QE_HPAC_CLEAR_ALL 0x0000000b -#define QE_GRACEFUL_STOP_RX 0x0000001a -#define QE_RESTART_RX 0x0000001b -#define QE_HPAC_SET_PRIORITY 0x0000010b -#define QE_HPAC_STOP_TX 0x0000020b -#define QE_HPAC_STOP_RX 0x0000030b -#define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b -#define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b -#define QE_HPAC_START_TX 0x0000060b -#define QE_HPAC_START_RX 0x0000070b -#define QE_USB_STOP_TX 0x0000000a -#define QE_USB_RESTART_TX 0x0000000c -#define QE_QMC_STOP_TX 0x0000000c -#define QE_QMC_STOP_RX 0x0000000d -#define QE_SS7_SU_FIL_RESET 0x0000000e -/* jonathbr added from here down for 83xx */ -#define QE_RESET_BCS 0x0000000a -#define QE_MCC_INIT_TX_RX_16 0x00000003 -#define QE_MCC_STOP_TX 0x00000004 -#define QE_MCC_INIT_TX_1 0x00000005 -#define QE_MCC_INIT_RX_1 0x00000006 -#define QE_MCC_RESET 0x00000007 -#define QE_SET_TIMER 0x00000008 -#define QE_RANDOM_NUMBER 0x0000000c -#define QE_ATM_MULTI_THREAD_INIT 0x00000011 -#define QE_ASSIGN_PAGE 0x00000012 -#define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 -#define QE_START_FLOW_CONTROL 0x00000014 -#define QE_STOP_FLOW_CONTROL 0x00000015 -#define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 - -#define QE_ASSIGN_RISC 0x00000010 -#define QE_CR_MCN_NORMAL_SHIFT 6 -#define QE_CR_MCN_USB_SHIFT 4 -#define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 -#define QE_CR_SNUM_SHIFT 17 - -/* QE CECR Sub Block - sub block of QE command. -*/ -#define QE_CR_SUBBLOCK_INVALID 0x00000000 -#define QE_CR_SUBBLOCK_USB 0x03200000 -#define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 -#define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 -#define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 -#define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 -#define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 -#define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 -#define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 -#define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 -#define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 -#define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 -#define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 -#define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 -#define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 -#define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 -#define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 -#define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 -#define QE_CR_SUBBLOCK_MCC1 0x03800000 -#define QE_CR_SUBBLOCK_MCC2 0x03a00000 -#define QE_CR_SUBBLOCK_MCC3 0x03000000 -#define QE_CR_SUBBLOCK_IDMA1 0x02800000 -#define QE_CR_SUBBLOCK_IDMA2 0x02a00000 -#define QE_CR_SUBBLOCK_IDMA3 0x02c00000 -#define QE_CR_SUBBLOCK_IDMA4 0x02e00000 -#define QE_CR_SUBBLOCK_HPAC 0x01e00000 -#define QE_CR_SUBBLOCK_SPI1 0x01400000 -#define QE_CR_SUBBLOCK_SPI2 0x01600000 -#define QE_CR_SUBBLOCK_RAND 0x01c00000 -#define QE_CR_SUBBLOCK_TIMER 0x01e00000 -#define QE_CR_SUBBLOCK_GENERAL 0x03c00000 - -/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ -#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ -#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 -#define QE_CR_PROTOCOL_QMC 0x02 -#define QE_CR_PROTOCOL_UART 0x04 -#define QE_CR_PROTOCOL_ATM_POS 0x0A -#define QE_CR_PROTOCOL_ETHERNET 0x0C -#define QE_CR_PROTOCOL_L2_SWITCH 0x0D - -/* BRG configuration register */ -#define QE_BRGC_ENABLE 0x00010000 -#define QE_BRGC_DIVISOR_SHIFT 1 -#define QE_BRGC_DIVISOR_MAX 0xFFF -#define QE_BRGC_DIV16 1 - -/* QE Timers registers */ -#define QE_GTCFR1_PCAS 0x80 -#define QE_GTCFR1_STP2 0x20 -#define QE_GTCFR1_RST2 0x10 -#define QE_GTCFR1_GM2 0x08 -#define QE_GTCFR1_GM1 0x04 -#define QE_GTCFR1_STP1 0x02 -#define QE_GTCFR1_RST1 0x01 - -/* SDMA registers */ -#define QE_SDSR_BER1 0x02000000 -#define QE_SDSR_BER2 0x01000000 - -#define QE_SDMR_GLB_1_MSK 0x80000000 -#define QE_SDMR_ADR_SEL 0x20000000 -#define QE_SDMR_BER1_MSK 0x02000000 -#define QE_SDMR_BER2_MSK 0x01000000 -#define QE_SDMR_EB1_MSK 0x00800000 -#define QE_SDMR_ER1_MSK 0x00080000 -#define QE_SDMR_ER2_MSK 0x00040000 -#define QE_SDMR_CEN_MASK 0x0000E000 -#define QE_SDMR_SBER_1 0x00000200 -#define QE_SDMR_SBER_2 0x00000200 -#define QE_SDMR_EB1_PR_MASK 0x000000C0 -#define QE_SDMR_ER1_PR 0x00000008 - -#define QE_SDMR_CEN_SHIFT 13 -#define QE_SDMR_EB1_PR_SHIFT 6 - -#define QE_SDTM_MSNUM_SHIFT 24 - -#define QE_SDEBCR_BA_MASK 0x01FFFFFF - -/* Communication Processor */ -#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ -#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ -#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ - -/* I-RAM */ -#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ -#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ - -/* UPC */ -#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ -#define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ -#define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ -#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ -#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ - -/* UCC GUEMR register */ -#define UCC_GUEMR_MODE_MASK_RX 0x02 -#define UCC_GUEMR_MODE_FAST_RX 0x02 -#define UCC_GUEMR_MODE_SLOW_RX 0x00 -#define UCC_GUEMR_MODE_MASK_TX 0x01 -#define UCC_GUEMR_MODE_FAST_TX 0x01 -#define UCC_GUEMR_MODE_SLOW_TX 0x00 -#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) -#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but - must be set 1 */ - -/* structure representing UCC SLOW parameter RAM */ -struct ucc_slow_pram { - __be16 rbase; /* RX BD base address */ - __be16 tbase; /* TX BD base address */ - u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ - u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ - __be16 mrblr; /* Rx buffer length */ - __be32 rstate; /* Rx internal state */ - __be32 rptr; /* Rx internal data pointer */ - __be16 rbptr; /* rb BD Pointer */ - __be16 rcount; /* Rx internal byte count */ - __be32 rtemp; /* Rx temp */ - __be32 tstate; /* Tx internal state */ - __be32 tptr; /* Tx internal data pointer */ - __be16 tbptr; /* Tx BD pointer */ - __be16 tcount; /* Tx byte count */ - __be32 ttemp; /* Tx temp */ - __be32 rcrc; /* temp receive CRC */ - __be32 tcrc; /* temp transmit CRC */ -} __attribute__ ((packed)); - -/* General UCC SLOW Mode Register (GUMRH & GUMRL) */ -#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 -#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 -#define UCC_SLOW_GUMR_H_REVD 0x00002000 -#define UCC_SLOW_GUMR_H_TRX 0x00001000 -#define UCC_SLOW_GUMR_H_TTX 0x00000800 -#define UCC_SLOW_GUMR_H_CDP 0x00000400 -#define UCC_SLOW_GUMR_H_CTSP 0x00000200 -#define UCC_SLOW_GUMR_H_CDS 0x00000100 -#define UCC_SLOW_GUMR_H_CTSS 0x00000080 -#define UCC_SLOW_GUMR_H_TFL 0x00000040 -#define UCC_SLOW_GUMR_H_RFW 0x00000020 -#define UCC_SLOW_GUMR_H_TXSY 0x00000010 -#define UCC_SLOW_GUMR_H_4SYNC 0x00000004 -#define UCC_SLOW_GUMR_H_8SYNC 0x00000008 -#define UCC_SLOW_GUMR_H_16SYNC 0x0000000c -#define UCC_SLOW_GUMR_H_RTSM 0x00000002 -#define UCC_SLOW_GUMR_H_RSYN 0x00000001 - -#define UCC_SLOW_GUMR_L_TCI 0x10000000 -#define UCC_SLOW_GUMR_L_RINV 0x02000000 -#define UCC_SLOW_GUMR_L_TINV 0x01000000 -#define UCC_SLOW_GUMR_L_TEND 0x00040000 -#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 -#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 -#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 -#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 -#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 -#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 -#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 -#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 -#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 -#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 -#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 -#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 -#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 -#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 -#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 -#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 -#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 -#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 -#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 -#define UCC_SLOW_GUMR_L_ENR 0x00000020 -#define UCC_SLOW_GUMR_L_ENT 0x00000010 -#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F -#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 -#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 -#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 -#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 - -/* General UCC FAST Mode Register */ -#define UCC_FAST_GUMR_TCI 0x20000000 -#define UCC_FAST_GUMR_TRX 0x10000000 -#define UCC_FAST_GUMR_TTX 0x08000000 -#define UCC_FAST_GUMR_CDP 0x04000000 -#define UCC_FAST_GUMR_CTSP 0x02000000 -#define UCC_FAST_GUMR_CDS 0x01000000 -#define UCC_FAST_GUMR_CTSS 0x00800000 -#define UCC_FAST_GUMR_TXSY 0x00020000 -#define UCC_FAST_GUMR_RSYN 0x00010000 -#define UCC_FAST_GUMR_RTSM 0x00002000 -#define UCC_FAST_GUMR_REVD 0x00000400 -#define UCC_FAST_GUMR_ENR 0x00000020 -#define UCC_FAST_GUMR_ENT 0x00000010 - -/* UART Slow UCC Event Register (UCCE) */ -#define UCC_UART_UCCE_AB 0x0200 -#define UCC_UART_UCCE_IDLE 0x0100 -#define UCC_UART_UCCE_GRA 0x0080 -#define UCC_UART_UCCE_BRKE 0x0040 -#define UCC_UART_UCCE_BRKS 0x0020 -#define UCC_UART_UCCE_CCR 0x0008 -#define UCC_UART_UCCE_BSY 0x0004 -#define UCC_UART_UCCE_TX 0x0002 -#define UCC_UART_UCCE_RX 0x0001 - -/* HDLC Slow UCC Event Register (UCCE) */ -#define UCC_HDLC_UCCE_GLR 0x1000 -#define UCC_HDLC_UCCE_GLT 0x0800 -#define UCC_HDLC_UCCE_IDLE 0x0100 -#define UCC_HDLC_UCCE_BRKE 0x0040 -#define UCC_HDLC_UCCE_BRKS 0x0020 -#define UCC_HDLC_UCCE_TXE 0x0010 -#define UCC_HDLC_UCCE_RXF 0x0008 -#define UCC_HDLC_UCCE_BSY 0x0004 -#define UCC_HDLC_UCCE_TXB 0x0002 -#define UCC_HDLC_UCCE_RXB 0x0001 - -/* BISYNC Slow UCC Event Register (UCCE) */ -#define UCC_BISYNC_UCCE_GRA 0x0080 -#define UCC_BISYNC_UCCE_TXE 0x0010 -#define UCC_BISYNC_UCCE_RCH 0x0008 -#define UCC_BISYNC_UCCE_BSY 0x0004 -#define UCC_BISYNC_UCCE_TXB 0x0002 -#define UCC_BISYNC_UCCE_RXB 0x0001 - -/* Gigabit Ethernet Fast UCC Event Register (UCCE) */ -#define UCC_GETH_UCCE_MPD 0x80000000 -#define UCC_GETH_UCCE_SCAR 0x40000000 -#define UCC_GETH_UCCE_GRA 0x20000000 -#define UCC_GETH_UCCE_CBPR 0x10000000 -#define UCC_GETH_UCCE_BSY 0x08000000 -#define UCC_GETH_UCCE_RXC 0x04000000 -#define UCC_GETH_UCCE_TXC 0x02000000 -#define UCC_GETH_UCCE_TXE 0x01000000 -#define UCC_GETH_UCCE_TXB7 0x00800000 -#define UCC_GETH_UCCE_TXB6 0x00400000 -#define UCC_GETH_UCCE_TXB5 0x00200000 -#define UCC_GETH_UCCE_TXB4 0x00100000 -#define UCC_GETH_UCCE_TXB3 0x00080000 -#define UCC_GETH_UCCE_TXB2 0x00040000 -#define UCC_GETH_UCCE_TXB1 0x00020000 -#define UCC_GETH_UCCE_TXB0 0x00010000 -#define UCC_GETH_UCCE_RXB7 0x00008000 -#define UCC_GETH_UCCE_RXB6 0x00004000 -#define UCC_GETH_UCCE_RXB5 0x00002000 -#define UCC_GETH_UCCE_RXB4 0x00001000 -#define UCC_GETH_UCCE_RXB3 0x00000800 -#define UCC_GETH_UCCE_RXB2 0x00000400 -#define UCC_GETH_UCCE_RXB1 0x00000200 -#define UCC_GETH_UCCE_RXB0 0x00000100 -#define UCC_GETH_UCCE_RXF7 0x00000080 -#define UCC_GETH_UCCE_RXF6 0x00000040 -#define UCC_GETH_UCCE_RXF5 0x00000020 -#define UCC_GETH_UCCE_RXF4 0x00000010 -#define UCC_GETH_UCCE_RXF3 0x00000008 -#define UCC_GETH_UCCE_RXF2 0x00000004 -#define UCC_GETH_UCCE_RXF1 0x00000002 -#define UCC_GETH_UCCE_RXF0 0x00000001 - -/* UPSMR, when used as a UART */ -#define UCC_UART_UPSMR_FLC 0x8000 -#define UCC_UART_UPSMR_SL 0x4000 -#define UCC_UART_UPSMR_CL_MASK 0x3000 -#define UCC_UART_UPSMR_CL_8 0x3000 -#define UCC_UART_UPSMR_CL_7 0x2000 -#define UCC_UART_UPSMR_CL_6 0x1000 -#define UCC_UART_UPSMR_CL_5 0x0000 -#define UCC_UART_UPSMR_UM_MASK 0x0c00 -#define UCC_UART_UPSMR_UM_NORMAL 0x0000 -#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 -#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 -#define UCC_UART_UPSMR_FRZ 0x0200 -#define UCC_UART_UPSMR_RZS 0x0100 -#define UCC_UART_UPSMR_SYN 0x0080 -#define UCC_UART_UPSMR_DRT 0x0040 -#define UCC_UART_UPSMR_PEN 0x0010 -#define UCC_UART_UPSMR_RPM_MASK 0x000c -#define UCC_UART_UPSMR_RPM_ODD 0x0000 -#define UCC_UART_UPSMR_RPM_LOW 0x0004 -#define UCC_UART_UPSMR_RPM_EVEN 0x0008 -#define UCC_UART_UPSMR_RPM_HIGH 0x000C -#define UCC_UART_UPSMR_TPM_MASK 0x0003 -#define UCC_UART_UPSMR_TPM_ODD 0x0000 -#define UCC_UART_UPSMR_TPM_LOW 0x0001 -#define UCC_UART_UPSMR_TPM_EVEN 0x0002 -#define UCC_UART_UPSMR_TPM_HIGH 0x0003 - -/* UCC Transmit On Demand Register (UTODR) */ -#define UCC_SLOW_TOD 0x8000 -#define UCC_FAST_TOD 0x8000 - -/* UCC Bus Mode Register masks */ -/* Not to be confused with the Bundle Mode Register */ -#define UCC_BMR_GBL 0x20 -#define UCC_BMR_BO_BE 0x10 -#define UCC_BMR_CETM 0x04 -#define UCC_BMR_DTB 0x02 -#define UCC_BMR_BDB 0x01 - -/* Function code masks */ -#define FC_GBL 0x20 -#define FC_DTB_LCL 0x02 -#define UCC_FAST_FUNCTION_CODE_GBL 0x20 -#define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 -#define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_QE_H */ diff --git a/include/asm-powerpc/qe_ic.h b/include/asm-powerpc/qe_ic.h deleted file mode 100644 index a779b2c9eaf1..000000000000 --- a/include/asm-powerpc/qe_ic.h +++ /dev/null @@ -1,130 +0,0 @@ -/* - * include/asm-powerpc/qe_ic.h - * - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * QE IC external definitions and structure. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_QE_IC_H -#define _ASM_POWERPC_QE_IC_H - -#include - -#define NUM_OF_QE_IC_GROUPS 6 - -/* Flags when we init the QE IC */ -#define QE_IC_SPREADMODE_GRP_W 0x00000001 -#define QE_IC_SPREADMODE_GRP_X 0x00000002 -#define QE_IC_SPREADMODE_GRP_Y 0x00000004 -#define QE_IC_SPREADMODE_GRP_Z 0x00000008 -#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010 -#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020 - -#define QE_IC_LOW_SIGNAL 0x00000100 -#define QE_IC_HIGH_SIGNAL 0x00000200 - -#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000 -#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000 -#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000 -#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000 -#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000 -#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000 -#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000 -#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000 -#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000 -#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000 -#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000 -#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000 -#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12) - -/* QE interrupt sources groups */ -enum qe_ic_grp_id { - QE_IC_GRP_W = 0, /* QE interrupt controller group W */ - QE_IC_GRP_X, /* QE interrupt controller group X */ - QE_IC_GRP_Y, /* QE interrupt controller group Y */ - QE_IC_GRP_Z, /* QE interrupt controller group Z */ - QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */ - QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */ -}; - -void qe_ic_init(struct device_node *node, unsigned int flags, - void (*low_handler)(unsigned int irq, struct irq_desc *desc), - void (*high_handler)(unsigned int irq, struct irq_desc *desc)); -void qe_ic_set_highest_priority(unsigned int virq, int high); -int qe_ic_set_priority(unsigned int virq, unsigned int priority); -int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high); - -struct qe_ic; -unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic); -unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic); - -static inline void qe_ic_cascade_low_ipic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -static inline void qe_ic_cascade_high_ipic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); -} - -static inline void qe_ic_cascade_low_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -static inline void qe_ic_cascade_high_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -static inline void qe_ic_cascade_muxed_mpic(unsigned int irq, - struct irq_desc *desc) -{ - struct qe_ic *qe_ic = desc->handler_data; - unsigned int cascade_irq; - - cascade_irq = qe_ic_get_high_irq(qe_ic); - if (cascade_irq == NO_IRQ) - cascade_irq = qe_ic_get_low_irq(qe_ic); - - if (cascade_irq != NO_IRQ) - generic_handle_irq(cascade_irq); - - desc->chip->eoi(irq); -} - -#endif /* _ASM_POWERPC_QE_IC_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h deleted file mode 100644 index c6d1ab650778..000000000000 --- a/include/asm-powerpc/reg.h +++ /dev/null @@ -1,788 +0,0 @@ -/* - * Contains the definition of registers common to all PowerPC variants. - * If a register definition has been changed in a different PowerPC - * variant, we will case it in #ifndef XXX ... #endif, and have the - * number used in the Programming Environments Manual For 32-Bit - * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. - */ - -#ifndef _ASM_POWERPC_REG_H -#define _ASM_POWERPC_REG_H -#ifdef __KERNEL__ - -#include -#include - -/* Pickup Book E specific registers. */ -#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) -#include -#endif /* CONFIG_BOOKE || CONFIG_40x */ - -#ifdef CONFIG_FSL_EMB_PERFMON -#include -#endif - -#ifdef CONFIG_8xx -#include -#endif /* CONFIG_8xx */ - -#define MSR_SF_LG 63 /* Enable 64 bit mode */ -#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ -#define MSR_HV_LG 60 /* Hypervisor state */ -#define MSR_VEC_LG 25 /* Enable AltiVec */ -#define MSR_VSX_LG 23 /* Enable VSX */ -#define MSR_POW_LG 18 /* Enable Power Management */ -#define MSR_WE_LG 18 /* Wait State Enable */ -#define MSR_TGPR_LG 17 /* TLB Update registers in use */ -#define MSR_CE_LG 17 /* Critical Interrupt Enable */ -#define MSR_ILE_LG 16 /* Interrupt Little Endian */ -#define MSR_EE_LG 15 /* External Interrupt Enable */ -#define MSR_PR_LG 14 /* Problem State / Privilege Level */ -#define MSR_FP_LG 13 /* Floating Point enable */ -#define MSR_ME_LG 12 /* Machine Check Enable */ -#define MSR_FE0_LG 11 /* Floating Exception mode 0 */ -#define MSR_SE_LG 10 /* Single Step */ -#define MSR_BE_LG 9 /* Branch Trace */ -#define MSR_DE_LG 9 /* Debug Exception Enable */ -#define MSR_FE1_LG 8 /* Floating Exception mode 1 */ -#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */ -#define MSR_IR_LG 5 /* Instruction Relocate */ -#define MSR_DR_LG 4 /* Data Relocate */ -#define MSR_PE_LG 3 /* Protection Enable */ -#define MSR_PX_LG 2 /* Protection Exclusive Mode */ -#define MSR_PMM_LG 2 /* Performance monitor */ -#define MSR_RI_LG 1 /* Recoverable Exception */ -#define MSR_LE_LG 0 /* Little Endian */ - -#ifdef __ASSEMBLY__ -#define __MASK(X) (1<<(X)) -#else -#define __MASK(X) (1UL<<(X)) -#endif - -#ifdef CONFIG_PPC64 -#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */ -#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */ -#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */ -#else -/* so tests for these bits fail on 32-bit */ -#define MSR_SF 0 -#define MSR_ISF 0 -#define MSR_HV 0 -#endif - -#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ -#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ -#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ -#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ -#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ -#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */ -#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */ -#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */ -#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */ -#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */ -#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */ -#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */ -#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */ -#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */ -#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */ -#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */ -#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */ -#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */ -#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */ -#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */ -#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */ -#ifndef MSR_PMM -#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */ -#endif -#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ -#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ - -#ifdef CONFIG_PPC64 -#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV -#define MSR_KERNEL MSR_ | MSR_SF - -#define MSR_USER32 MSR_ | MSR_PR | MSR_EE -#define MSR_USER64 MSR_USER32 | MSR_SF - -#else /* 32-bit */ -/* Default MSR for kernel mode. */ -#ifndef MSR_KERNEL /* reg_booke.h also defines this */ -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) -#endif - -#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) -#endif - -/* Floating Point Status and Control Register (FPSCR) Fields */ -#define FPSCR_FX 0x80000000 /* FPU exception summary */ -#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ -#define FPSCR_VX 0x20000000 /* Invalid operation summary */ -#define FPSCR_OX 0x10000000 /* Overflow exception summary */ -#define FPSCR_UX 0x08000000 /* Underflow exception summary */ -#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */ -#define FPSCR_XX 0x02000000 /* Inexact exception summary */ -#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ -#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ -#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ -#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ -#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ -#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ -#define FPSCR_FR 0x00040000 /* Fraction rounded */ -#define FPSCR_FI 0x00020000 /* Fraction inexact */ -#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ -#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ -#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ -#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ -#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ -#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ -#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ -#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ -#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ -#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ -#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ -#define FPSCR_RN 0x00000003 /* FPU rounding control */ - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_CTR 0x009 /* Count Register */ -#define SPRN_DSCR 0x11 -#define SPRN_CTRLF 0x088 -#define SPRN_CTRLT 0x098 -#define CTRL_CT 0xc0000000 /* current thread */ -#define CTRL_CT0 0x80000000 /* thread 0 */ -#define CTRL_CT1 0x40000000 /* thread 1 */ -#define CTRL_TE 0x00c00000 /* thread enable */ -#define CTRL_RUNLATCH 0x1 -#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ -#define DABR_TRANSLATION (1UL << 2) -#define SPRN_DABR2 0x13D /* e300 */ -#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ -#define DABRX_USER (1UL << 0) -#define DABRX_KERNEL (1UL << 1) -#define SPRN_DAR 0x013 /* Data Address Register */ -#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */ -#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ -#define DSISR_NOHPTE 0x40000000 /* no translation found */ -#define DSISR_PROTFAULT 0x08000000 /* protection fault */ -#define DSISR_ISSTORE 0x02000000 /* access was a store */ -#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ -#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */ -#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ -#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ -#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ -#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ -#define SPRN_SPURR 0x134 /* Scaled PURR */ -#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ -#define SPRN_LPCR 0x13E /* LPAR Control Register */ -#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ -#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ -#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ -#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ -#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ -#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ -#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ -#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ -#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ -#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ -#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ -#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ -#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ -#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ -#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ -#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ - -#define SPRN_DEC 0x016 /* Decrement Register */ -#define SPRN_DER 0x095 /* Debug Enable Regsiter */ -#define DER_RSTE 0x40000000 /* Reset Interrupt */ -#define DER_CHSTPE 0x20000000 /* Check Stop */ -#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ -#define DER_EXTIE 0x02000000 /* External Interrupt */ -#define DER_ALIE 0x01000000 /* Alignment Interrupt */ -#define DER_PRIE 0x00800000 /* Program Interrupt */ -#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ -#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ -#define DER_SYSIE 0x00040000 /* System Call Interrupt */ -#define DER_TRE 0x00020000 /* Trace Interrupt */ -#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ -#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ -#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ -#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ -#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ -#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ -#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ -#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ -#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ -#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ -#define SPRN_EAR 0x11A /* External Address Register */ -#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ -#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */ -#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ -#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ -#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ -#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ -#define HID0_SBCLK (1<<27) -#define HID0_EICE (1<<26) -#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ -#define HID0_ECLK (1<<25) -#define HID0_PAR (1<<24) -#define HID0_STEN (1<<24) /* Software table search enable - 745x */ -#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ -#define HID0_DOZE (1<<23) -#define HID0_NAP (1<<22) -#define HID0_SLEEP (1<<21) -#define HID0_DPM (1<<20) -#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ -#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ -#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ -#define HID0_ICE (1<<15) /* Instruction Cache Enable */ -#define HID0_DCE (1<<14) /* Data Cache Enable */ -#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ -#define HID0_DLOCK (1<<12) /* Data Cache Lock */ -#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ -#define HID0_DCI (1<<10) /* Data Cache Invalidate */ -#define HID0_SPD (1<<9) /* Speculative disable */ -#define HID0_DAPUEN (1<<8) /* Debug APU enable */ -#define HID0_SGE (1<<7) /* Store Gathering Enable */ -#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ -#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ -#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ -#define HID0_ABE (1<<3) /* Address Broadcast Enable */ -#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ -#define HID0_BHTE (1<<2) /* Branch History Table Enable */ -#define HID0_BTCD (1<<1) /* Branch target cache disable */ -#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ -#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ - -#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ -#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ -#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ -#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ -#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ -#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ -#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ -#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ -#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ -#define HID1_PS (1<<16) /* 750FX PLL selection */ -#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ -#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ -#define SPRN_IABR2 0x3FA /* 83xx */ -#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ -#define SPRN_HID4 0x3F4 /* 970 HID4 */ -#define SPRN_HID5 0x3F6 /* 970 HID5 */ -#define SPRN_HID6 0x3F9 /* BE HID 6 */ -#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ -#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ -#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ -#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ -#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ -#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ -#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ -#define SPRN_TSC 0x3FD /* Thread switch control on others */ -#define SPRN_TST 0x3FC /* Thread switch timeout on others */ -#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) -#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ -#endif -#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ -#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ -#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ -#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ -#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ -#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ -#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ -#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ -#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ -#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ -#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ -#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ -#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ -#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ -#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ -#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ -#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ -#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ -#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ -#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ -#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ -#define ICTRL_EICP 0x00000100 /* enable icache par. check */ -#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ -#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ -#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ -#define SPRN_L2CR2 0x3f8 -#define L2CR_L2E 0x80000000 /* L2 enable */ -#define L2CR_L2PE 0x40000000 /* L2 parity enable */ -#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ -#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ -#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ -#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ -#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ -#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ -#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ -#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ -#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ -#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ -#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ -#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ -#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ -#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ -#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ -#define L2CR_L2DO 0x00400000 /* L2 data only */ -#define L2CR_L2I 0x00200000 /* L2 global invalidate */ -#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ -#define L2CR_L2WT 0x00080000 /* L2 write-through */ -#define L2CR_L2TS 0x00040000 /* L2 test support */ -#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ -#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ -#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ -#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ -#define L2CR_L2DF 0x00004000 /* L2 differential clock */ -#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ -#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ -#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ -#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ -#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ -#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ -#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */ -#define L3CR_L3E 0x80000000 /* L3 enable */ -#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ -#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ -#define L3CR_L3SIZ 0x10000000 /* L3 size */ -#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ -#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ -#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ -#define L3CR_L3IO 0x00400000 /* L3 instruction only */ -#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ -#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ -#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ -#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ -#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ -#define L3CR_L3I 0x00000400 /* L3 global invalidate */ -#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ -#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ -#define L3CR_L3DO 0x00000040 /* L3 data only mode */ -#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ -#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ - -#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ -#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ -#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ -#define SPRN_LDSTDB 0x3f4 /* */ -#define SPRN_LR 0x008 /* Link Register */ -#ifndef SPRN_PIR -#define SPRN_PIR 0x3FF /* Processor Identification Register */ -#endif -#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ -#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ -#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ -#define SPRN_PVR 0x11F /* Processor Version Register */ -#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ -#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ -#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ -#define SPRN_ASR 0x118 /* Address Space Register */ -#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ -#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ -#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ -#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ -#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ -#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ -#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ -#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ -#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ -#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ -#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ -#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ -#define SRR1_WAKERESET 0x00380000 /* System reset */ -#define SRR1_WAKESYSERR 0x00300000 /* System error */ -#define SRR1_WAKEEE 0x00200000 /* External interrupt */ -#define SRR1_WAKEMT 0x00280000 /* mtctrl */ -#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ -#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */ -#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ -#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ - -#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ -#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ -#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ -#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ -#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ - -#ifndef SPRN_SVR -#define SPRN_SVR 0x11E /* System Version Register */ -#endif -#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ -/* these bits were defined in inverted endian sense originally, ugh, confusing */ -#define THRM1_TIN (1 << 31) -#define THRM1_TIV (1 << 30) -#define THRM1_THRES(x) ((x&0x7f)<<23) -#define THRM3_SITV(x) ((x&0x3fff)<<1) -#define THRM1_TID (1<<2) -#define THRM1_TIE (1<<1) -#define THRM1_V (1<<0) -#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ -#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ -#define THRM3_E (1<<0) -#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ -#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ -#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ -#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ -#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ -#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ -#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ -#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ -#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ -#define SPRN_XER 0x001 /* Fixed Point Exception Register */ - -#define SPRN_SCOMC 0x114 /* SCOM Access Control */ -#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ - -/* Performance monitor SPRs */ -#ifdef CONFIG_PPC64 -#define SPRN_MMCR0 795 -#define MMCR0_FC 0x80000000UL /* freeze counters */ -#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ -#define MMCR0_KERNEL_DISABLE MMCR0_FCS -#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ -#define MMCR0_PROBLEM_DISABLE MMCR0_FCP -#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ -#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ -#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ -#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ -#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ -#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ -#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ -#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ -#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */ -#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ -#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ -#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */ -#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ -#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ -#define SPRN_MMCR1 798 -#define SPRN_MMCRA 0x312 -#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ -#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ -#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ -#define MMCRA_SLOT_SHIFT 24 -#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ -#define POWER6_MMCRA_SIHV 0x0000040000000000ULL -#define POWER6_MMCRA_SIPR 0x0000020000000000ULL -#define POWER6_MMCRA_THRM 0x00000020UL -#define POWER6_MMCRA_OTHER 0x0000000EUL -#define SPRN_PMC1 787 -#define SPRN_PMC2 788 -#define SPRN_PMC3 789 -#define SPRN_PMC4 790 -#define SPRN_PMC5 791 -#define SPRN_PMC6 792 -#define SPRN_PMC7 793 -#define SPRN_PMC8 794 -#define SPRN_SIAR 780 -#define SPRN_SDAR 781 - -#define SPRN_PA6T_MMCR0 795 -#define PA6T_MMCR0_EN0 0x0000000000000001UL -#define PA6T_MMCR0_EN1 0x0000000000000002UL -#define PA6T_MMCR0_EN2 0x0000000000000004UL -#define PA6T_MMCR0_EN3 0x0000000000000008UL -#define PA6T_MMCR0_EN4 0x0000000000000010UL -#define PA6T_MMCR0_EN5 0x0000000000000020UL -#define PA6T_MMCR0_SUPEN 0x0000000000000040UL -#define PA6T_MMCR0_PREN 0x0000000000000080UL -#define PA6T_MMCR0_HYPEN 0x0000000000000100UL -#define PA6T_MMCR0_FCM0 0x0000000000000200UL -#define PA6T_MMCR0_FCM1 0x0000000000000400UL -#define PA6T_MMCR0_INTGEN 0x0000000000000800UL -#define PA6T_MMCR0_INTEN0 0x0000000000001000UL -#define PA6T_MMCR0_INTEN1 0x0000000000002000UL -#define PA6T_MMCR0_INTEN2 0x0000000000004000UL -#define PA6T_MMCR0_INTEN3 0x0000000000008000UL -#define PA6T_MMCR0_INTEN4 0x0000000000010000UL -#define PA6T_MMCR0_INTEN5 0x0000000000020000UL -#define PA6T_MMCR0_DISCNT 0x0000000000040000UL -#define PA6T_MMCR0_UOP 0x0000000000080000UL -#define PA6T_MMCR0_TRG 0x0000000000100000UL -#define PA6T_MMCR0_TRGEN 0x0000000000200000UL -#define PA6T_MMCR0_TRGREG 0x0000000001600000UL -#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL -#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL -#define PA6T_MMCR0_PROEN 0x0000000008000000UL -#define PA6T_MMCR0_PROLOG 0x0000000010000000UL -#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL -#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL -#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL -#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL -#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL -#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL -#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL -#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL -#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL -#define PA6T_MMCR0_PCTEN 0x0000004000000000UL -#define PA6T_MMCR0_SOCEN 0x0000008000000000UL -#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL - -#define SPRN_PA6T_MMCR1 798 -#define PA6T_MMCR1_ES2 0x00000000000000ffUL -#define PA6T_MMCR1_ES3 0x000000000000ff00UL -#define PA6T_MMCR1_ES4 0x0000000000ff0000UL -#define PA6T_MMCR1_ES5 0x00000000ff000000UL - -#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ -#define SPRN_PA6T_UPMC1 772 /* ... */ -#define SPRN_PA6T_UPMC2 773 -#define SPRN_PA6T_UPMC3 774 -#define SPRN_PA6T_UPMC4 775 -#define SPRN_PA6T_UPMC5 776 -#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ -#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ -#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ -#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ -#define SPRN_PA6T_PMC0 787 -#define SPRN_PA6T_PMC1 788 -#define SPRN_PA6T_PMC2 789 -#define SPRN_PA6T_PMC3 790 -#define SPRN_PA6T_PMC4 791 -#define SPRN_PA6T_PMC5 792 -#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ -#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ -#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ -#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ - -#define SPRN_PA6T_IER 981 /* Icache Error Register */ -#define SPRN_PA6T_DER 982 /* Dcache Error Register */ -#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ -#define SPRN_PA6T_MER 849 /* MMU Error Register */ - -#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ -#define SPRN_PA6T_IMA1 881 /* ... */ -#define SPRN_PA6T_IMA2 882 -#define SPRN_PA6T_IMA3 883 -#define SPRN_PA6T_IMA4 884 -#define SPRN_PA6T_IMA5 885 -#define SPRN_PA6T_IMA6 886 -#define SPRN_PA6T_IMA7 887 -#define SPRN_PA6T_IMA8 888 -#define SPRN_PA6T_IMA9 889 -#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ -#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ -#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ -#define SPRN_BKMK 1020 /* Cell Bookmark Register */ -#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ - - -#else /* 32-bit */ -#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ -#define MMCR0_FC 0x80000000UL /* freeze counters */ -#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ -#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ -#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ -#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ -#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ -#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ -#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ -#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ -#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/ -#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ -#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */ -#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */ - -#define SPRN_MMCR1 956 -#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */ -#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */ -#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */ -#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */ -#define SPRN_MMCR2 944 -#define SPRN_PMC1 953 /* Performance Counter Register 1 */ -#define SPRN_PMC2 954 /* Performance Counter Register 2 */ -#define SPRN_PMC3 957 /* Performance Counter Register 3 */ -#define SPRN_PMC4 958 /* Performance Counter Register 4 */ -#define SPRN_PMC5 945 /* Performance Counter Register 5 */ -#define SPRN_PMC6 946 /* Performance Counter Register 6 */ - -#define SPRN_SIAR 955 /* Sampled Instruction Address Register */ - -/* Bit definitions for MMCR0 and PMC1 / PMC2. */ -#define MMCR0_PMC1_CYCLES (1 << 7) -#define MMCR0_PMC1_ICACHEMISS (5 << 7) -#define MMCR0_PMC1_DTLB (6 << 7) -#define MMCR0_PMC2_DCACHEMISS 0x6 -#define MMCR0_PMC2_CYCLES 0x1 -#define MMCR0_PMC2_ITLB 0x7 -#define MMCR0_PMC2_LOADMISSTIME 0x5 -#endif - -/* - * An mtfsf instruction with the L bit set. On CPUs that support this a - * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. - * - * Until binutils gets the new form of mtfsf, hardwire the instruction. - */ -#ifdef CONFIG_PPC64 -#define MTFSF_L(REG) \ - .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25)) -#else -#define MTFSF_L(REG) mtfsf 0xff, (REG) -#endif - -/* Processor Version Register (PVR) field extraction */ - -#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ -#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ - -#define __is_processor(pv) (PVR_VER(mfspr(SPRN_PVR)) == (pv)) - -/* - * IBM has further subdivided the standard PowerPC 16-bit version and - * revision subfields of the PVR for the PowerPC 403s into the following: - */ - -#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ -#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ -#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ -#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ -#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ -#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ - -/* Processor Version Numbers */ - -#define PVR_403GA 0x00200000 -#define PVR_403GB 0x00200100 -#define PVR_403GC 0x00200200 -#define PVR_403GCX 0x00201400 -#define PVR_405GP 0x40110000 -#define PVR_STB03XXX 0x40310000 -#define PVR_NP405H 0x41410000 -#define PVR_NP405L 0x41610000 -#define PVR_601 0x00010000 -#define PVR_602 0x00050000 -#define PVR_603 0x00030000 -#define PVR_603e 0x00060000 -#define PVR_603ev 0x00070000 -#define PVR_603r 0x00071000 -#define PVR_604 0x00040000 -#define PVR_604e 0x00090000 -#define PVR_604r 0x000A0000 -#define PVR_620 0x00140000 -#define PVR_740 0x00080000 -#define PVR_750 PVR_740 -#define PVR_740P 0x10080000 -#define PVR_750P PVR_740P -#define PVR_7400 0x000C0000 -#define PVR_7410 0x800C0000 -#define PVR_7450 0x80000000 -#define PVR_8540 0x80200000 -#define PVR_8560 0x80200000 -/* - * For the 8xx processors, all of them report the same PVR family for - * the PowerPC core. The various versions of these processors must be - * differentiated by the version number in the Communication Processor - * Module (CPM). - */ -#define PVR_821 0x00500000 -#define PVR_823 PVR_821 -#define PVR_850 PVR_821 -#define PVR_860 PVR_821 -#define PVR_8240 0x00810100 -#define PVR_8245 0x80811014 -#define PVR_8260 PVR_8240 - -/* 64-bit processors */ -/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */ -#define PV_NORTHSTAR 0x0033 -#define PV_PULSAR 0x0034 -#define PV_POWER4 0x0035 -#define PV_ICESTAR 0x0036 -#define PV_SSTAR 0x0037 -#define PV_POWER4p 0x0038 -#define PV_970 0x0039 -#define PV_POWER5 0x003A -#define PV_POWER5p 0x003B -#define PV_970FX 0x003C -#define PV_630 0x0040 -#define PV_630p 0x0041 -#define PV_970MP 0x0044 -#define PV_970GX 0x0045 -#define PV_BE 0x0070 -#define PV_PA6T 0x0090 - -/* Macros for setting and retrieving special purpose registers */ -#ifndef __ASSEMBLY__ -#define mfmsr() ({unsigned long rval; \ - asm volatile("mfmsr %0" : "=r" (rval)); rval;}) -#ifdef CONFIG_PPC64 -#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ - : : "r" (v)) -#define mtmsrd(v) __mtmsrd((v), 0) -#define mtmsr(v) mtmsrd(v) -#else -#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v)) -#endif - -#define mfspr(rn) ({unsigned long rval; \ - asm volatile("mfspr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) - -#ifdef __powerpc64__ -#ifdef CONFIG_PPC_CELL -#define mftb() ({unsigned long rval; \ - asm volatile( \ - "90: mftb %0;\n" \ - "97: cmpwi %0,0;\n" \ - " beq- 90b;\n" \ - "99:\n" \ - ".section __ftr_fixup,\"a\"\n" \ - ".align 3\n" \ - "98:\n" \ - " .llong %1\n" \ - " .llong %1\n" \ - " .llong 97b-98b\n" \ - " .llong 99b-98b\n" \ - " .llong 0\n" \ - " .llong 0\n" \ - ".previous" \ - : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) -#else -#define mftb() ({unsigned long rval; \ - asm volatile("mftb %0" : "=r" (rval)); rval;}) -#endif /* !CONFIG_PPC_CELL */ - -#else /* __powerpc64__ */ - -#define mftbl() ({unsigned long rval; \ - asm volatile("mftbl %0" : "=r" (rval)); rval;}) -#define mftbu() ({unsigned long rval; \ - asm volatile("mftbu %0" : "=r" (rval)); rval;}) -#endif /* !__powerpc64__ */ - -#define mttbl(v) asm volatile("mttbl %0":: "r"(v)) -#define mttbu(v) asm volatile("mttbu %0":: "r"(v)) - -#ifdef CONFIG_PPC32 -#define mfsrin(v) ({unsigned int rval; \ - asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ - rval;}) -#endif - -#define proc_trap() asm volatile("trap") - -#ifdef CONFIG_PPC64 - -extern void ppc64_runlatch_on(void); -extern void ppc64_runlatch_off(void); - -extern unsigned long scom970_read(unsigned int address); -extern void scom970_write(unsigned int address, unsigned long value); - -#else -#define ppc64_runlatch_on() -#define ppc64_runlatch_off() - -#endif /* CONFIG_PPC64 */ - -#define __get_SP() ({unsigned long sp; \ - asm volatile("mr %0,1": "=r" (sp)); sp;}) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_REG_H */ diff --git a/include/asm-powerpc/reg_8xx.h b/include/asm-powerpc/reg_8xx.h deleted file mode 100644 index e8ea346b21d3..000000000000 --- a/include/asm-powerpc/reg_8xx.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Contains register definitions common to PowerPC 8xx CPUs. Notice - */ -#ifndef _ASM_POWERPC_REG_8xx_H -#define _ASM_POWERPC_REG_8xx_H - -/* Cache control on the MPC8xx is provided through some additional - * special purpose registers. - */ -#define SPRN_IC_CST 560 /* Instruction cache control/status */ -#define SPRN_IC_ADR 561 /* Address needed for some commands */ -#define SPRN_IC_DAT 562 /* Read-only data register */ -#define SPRN_DC_CST 568 /* Data cache control/status */ -#define SPRN_DC_ADR 569 /* Address needed for some commands */ -#define SPRN_DC_DAT 570 /* Read-only data register */ - -/* Commands. Only the first few are available to the instruction cache. -*/ -#define IDC_ENABLE 0x02000000 /* Cache enable */ -#define IDC_DISABLE 0x04000000 /* Cache disable */ -#define IDC_LDLCK 0x06000000 /* Load and lock */ -#define IDC_UNLINE 0x08000000 /* Unlock line */ -#define IDC_UNALL 0x0a000000 /* Unlock all */ -#define IDC_INVALL 0x0c000000 /* Invalidate all */ - -#define DC_FLINE 0x0e000000 /* Flush data cache line */ -#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ -#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ -#define DC_SLES 0x05000000 /* Set little endian swap mode */ -#define DC_CLES 0x07000000 /* Clear little endian swap mode */ - -/* Status. -*/ -#define IDC_ENABLED 0x80000000 /* Cache is enabled */ -#define IDC_CERR1 0x00200000 /* Cache error 1 */ -#define IDC_CERR2 0x00100000 /* Cache error 2 */ -#define IDC_CERR3 0x00080000 /* Cache error 3 */ - -#define DC_DFWT 0x40000000 /* Data cache is forced write through */ -#define DC_LES 0x20000000 /* Caches are little endian mode */ - -#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h deleted file mode 100644 index be980f4ee495..000000000000 --- a/include/asm-powerpc/reg_booke.h +++ /dev/null @@ -1,501 +0,0 @@ -/* - * Contains register definitions common to the Book E PowerPC - * specification. Notice that while the IBM-40x series of CPUs - * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunatly, - * they sometimes used different locations than true Book E CPUs did. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_REG_BOOKE_H__ -#define __ASM_POWERPC_REG_BOOKE_H__ - -/* Machine State Register (MSR) Fields */ -#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ -#define MSR_SPE (1<<25) /* Enable SPE */ -#define MSR_DWE (1<<10) /* Debug Wait Enable */ -#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ -#define MSR_IS MSR_IR /* Instruction Space */ -#define MSR_DS MSR_DR /* Data Space */ -#define MSR_PMM (1<<2) /* Performance monitor mark bit */ - -/* Default MSR for kernel mode. */ -#if defined (CONFIG_40x) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#elif defined(CONFIG_BOOKE) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) -#endif - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ -#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ -#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ -#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ -#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ -#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ -#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ -#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ -#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ -#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ -#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ -#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ -#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ -#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ -#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ -#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ -#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ -#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ -#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ -#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ -#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ -#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ -#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ -#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ -#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ -#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ -#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ -#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ -#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ -#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ -#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ -#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ -#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ -#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ -#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ -#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ -#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ -#define SPRN_ATB 0x20E /* Alternate Time Base */ -#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ -#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ -#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ -#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ -#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ -#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ -#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ -#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ -#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ -#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ -#define SPRN_MCSR 0x23C /* Machine Check Status Register */ -#define SPRN_MCAR 0x23D /* Machine Check Address Register */ -#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ -#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ -#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ -#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ -#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ -#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ -#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ -#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ -#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ -#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ -#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ -#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ -#define SPRN_PID1 0x279 /* Process ID Register 1 */ -#define SPRN_PID2 0x27A /* Process ID Register 2 */ -#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ -#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ -#define SPRN_EPR 0x2BE /* External Proxy Register */ -#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ -#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ -#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ -#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ -#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ -#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ -#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ -#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ -#define SPRN_SLER 0x3BB /* Little-endian real mode */ -#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ -#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ -#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ -#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ -#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ -#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ -#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ -#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ -#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ -#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ -#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ -#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ -#define SPRN_SVR 0x3FF /* System Version Register */ - -/* - * SPRs which have conflicting definitions on true Book E versus classic, - * or IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define SPRN_PID 0x030 /* Process ID */ -#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ -#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ -#define SPRN_DEAR 0x03D /* Data Error Address Register */ -#define SPRN_ESR 0x03E /* Exception Syndrome Register */ -#define SPRN_PIR 0x11E /* Processor Identification Register */ -#define SPRN_DBSR 0x130 /* Debug Status Register */ -#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ -#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ -#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ -#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ -#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ -#define SPRN_TSR 0x150 /* Timer Status Register */ -#define SPRN_TCR 0x154 /* Timer Control Register */ -#endif /* Book E */ -#ifdef CONFIG_40x -#define SPRN_PID 0x3B1 /* Process ID */ -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ -#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ -#endif - -/* Bit definitions for CCR1. */ -#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ -#define CCR1_TCS 0x00000080 /* Timer Clock Select */ - -/* Bit definitions for the MCSR. */ -#define MCSR_MCS 0x80000000 /* Machine Check Summary */ -#define MCSR_IB 0x40000000 /* Instruction PLB Error */ -#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ -#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ -#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ -#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ -#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ -#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ -#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ - -#ifdef CONFIG_E500 -#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ -#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ -#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ -#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ -#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ -#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ -#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ -#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ -#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ -#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ -#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ -#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ - -/* e500 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ - MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ - MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ - MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) -#endif -#ifdef CONFIG_E200 -#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ -#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ -#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ -#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn - fetch for an exception handler */ -#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ -#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ -#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered - store or cache line push */ - -/* e200 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ - MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ - MCSR_BUS_WRERR) -#endif - -/* Bit definitions for the DBSR. */ -/* - * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define DBSR_IC 0x08000000 /* Instruction Completion */ -#define DBSR_BT 0x04000000 /* Branch Taken */ -#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ -#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ -#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ -#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ -#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ -#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ -#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ -#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ -#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ -#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ -#define DBSR_RET 0x00008000 /* Return Debug Event */ -#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ -#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ -#endif -#ifdef CONFIG_40x -#define DBSR_IC 0x80000000 /* Instruction Completion */ -#define DBSR_BT 0x40000000 /* Branch taken */ -#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ -#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ -#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ -#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ -#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ -#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ -#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ -#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ -#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ -#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ -#endif - -/* Bit definitions related to the ESR. */ -#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ -#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ -#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ -#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ -#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ -#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ -#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ -#define ESR_PTR 0x02000000 /* Program Exception - Trap */ -#define ESR_FP 0x01000000 /* Floating Point Operation */ -#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ -#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ -#define ESR_ST 0x00800000 /* Store Operation */ -#define ESR_DLK 0x00200000 /* Data Cache Locking */ -#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ -#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ -#define ESR_BO 0x00020000 /* Byte Ordering */ - -/* Bit definitions related to the DBCR0. */ -#if defined(CONFIG_40x) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_IC 0x08000000 /* Instruction Completion */ -#define DBCR0_ICMP DBCR0_IC -#define DBCR0_BT 0x04000000 /* Branch Taken */ -#define DBCR0_BRT DBCR0_BT -#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR0_IRPT DBCR0_EDE -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC1 DBCR0_IA1 -#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC2 DBCR0_IA2 -#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ -#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC3 DBCR0_IA3 -#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ -#define DBCR0_IAC4 DBCR0_IA4 -#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ -#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ -#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ -#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ -#elif defined(CONFIG_BOOKE) -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ -#define DBCR0_IC DBCR0_ICMP -#define DBCR0_BRT 0x04000000 /* Branch Taken */ -#define DBCR0_BT DBCR0_BRT -#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_TIE DBCR0_TDE -#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ -#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ -#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ -#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ -#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ -#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ -#define DBCR0_RET 0x00008000 /* Return Debug Event */ -#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ -#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ - -/* Bit definitions related to the DBCR1. */ -#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ -#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ -#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ -#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ -#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ - -/* Bit definitions related to the DBCR2. */ -#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ -#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ -#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ -#endif - -/* Bit definitions related to the TCR. */ -#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -#define TCR_WP_MASK TCR_WP(3) -#define WP_2_17 0 /* 2^17 clocks */ -#define WP_2_21 1 /* 2^21 clocks */ -#define WP_2_25 2 /* 2^25 clocks */ -#define WP_2_29 3 /* 2^29 clocks */ -#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ -#define TCR_WRC_MASK TCR_WRC(3) -#define WRC_NONE 0 /* No reset will occur */ -#define WRC_CORE 1 /* Core reset will occur */ -#define WRC_CHIP 2 /* Chip reset will occur */ -#define WRC_SYSTEM 3 /* System reset will occur */ -#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ -#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ -#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ -#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ -#define TCR_FP_MASK TCR_FP(3) -#define FP_2_9 0 /* 2^9 clocks */ -#define FP_2_13 1 /* 2^13 clocks */ -#define FP_2_17 2 /* 2^17 clocks */ -#define FP_2_21 3 /* 2^21 clocks */ -#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ -#define TCR_ARE 0x00400000 /* Auto Reload Enable */ - -/* Bit definitions for the TSR. */ -#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ -#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ -#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ -#define WRS_NONE 0 /* No WDT reset occurred */ -#define WRS_CORE 1 /* WDT forced core reset */ -#define WRS_CHIP 2 /* WDT forced chip reset */ -#define WRS_SYSTEM 3 /* WDT forced system reset */ -#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ -#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ -#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ - -/* Bit definitions for the DCCR. */ -#define DCCR_NOCACHE 0 /* Noncacheable */ -#define DCCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for DCWR. */ -#define DCWR_COPY 0 /* Copy-back */ -#define DCWR_WRITE 1 /* Write-through */ - -/* Bit definitions for ICCR. */ -#define ICCR_NOCACHE 0 /* Noncacheable */ -#define ICCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for L1CSR0. */ -#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ -#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ -#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ -#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ - -/* Bit definitions for L1CSR1. */ -#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ -#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ -#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ - -/* Bit definitions for L2CSR0. */ -#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ -#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ -#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ -#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ -#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ -#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ -#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ -#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ -#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ -#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ -#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ -#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ - -/* Bit definitions for SGR. */ -#define SGR_NORMAL 0 /* Speculative fetching allowed. */ -#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ - -/* Bit definitions for SPEFSCR. */ -#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ -#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ -#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ -#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ -#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ -#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ -#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ -#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ -#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ -#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ -#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ -#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ -#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ -#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ -#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ -#define SPEFSCR_OV 0x00004000 /* Integer overflow */ -#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ -#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ -#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ -#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ -#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ -#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ -#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ -#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ -#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ -#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ -#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ -#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ - -/* - * The IBM-403 is an even more odd special case, as it is much - * older than the IBM-405 series. We put these down here incase someone - * wishes to support these machines again. - */ -#ifdef CONFIG_403GCX -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_TBHU 0x3CC /* Time Base High User-mode */ -#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ -#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ -#define SPRN_TBHI 0x3DC /* Time Base High */ -#define SPRN_TBLO 0x3DD /* Time Base Low */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ -#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ -#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ -#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ -#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ - - -/* Bit definitions for the DBCR. */ -#define DBCR_EDM DBCR0_EDM -#define DBCR_IDM DBCR0_IDM -#define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 -#define DBCR_RST_SYSTEM 3 -#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ -#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ -#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ -#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ -#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ -#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ -#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ -#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ -#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ -#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ -#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ -#define DAC_BYTE 0 -#define DAC_HALF 1 -#define DAC_WORD 2 -#define DAC_QUAD 3 -#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ -#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ -#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ -#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ -#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ -#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ -#define DBCR_SIA 0x00000008 /* Second IAC Enable */ -#define DBCR_SDA 0x00000004 /* Second DAC Enable */ -#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ -#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ -#endif /* 403GCX */ -#endif /* __ASM_POWERPC_REG_BOOKE_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/reg_fsl_emb.h b/include/asm-powerpc/reg_fsl_emb.h deleted file mode 100644 index 1e180a594589..000000000000 --- a/include/asm-powerpc/reg_fsl_emb.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Contains register definitions for the Freescale Embedded Performance - * Monitor. - */ -#ifdef __KERNEL__ -#ifndef __ASM_POWERPC_REG_FSL_EMB_H__ -#define __ASM_POWERPC_REG_FSL_EMB_H__ - -#ifndef __ASSEMBLY__ -/* Performance Monitor Registers */ -#define mfpmr(rn) ({unsigned int rval; \ - asm volatile("mfpmr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) -#endif /* __ASSEMBLY__ */ - -/* Freescale Book E Performance Monitor APU Registers */ -#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ -#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ -#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */ -#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */ -#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ -#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ -#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ -#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ - -#define PMLCA_FC 0x80000000 /* Freeze Counter */ -#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ -#define PMLCA_FCU 0x20000000 /* Freeze in User */ -#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ -#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ -#define PMLCA_CE 0x04000000 /* Condition Enable */ - -#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ -#define PMLCA_EVENT_SHIFT 16 - -#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ -#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ -#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ -#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ - -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ -#define PMLCB_THRESHMUL_SHIFT 8 - -#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ -#define PMLCB_THRESHOLD_SHIFT 0 - -#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ - -#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ -#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ -#define PMGC0_FCECE 0x20000000 /* Freeze countes on - Enabled Condition or - Event */ - -#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ -#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ -#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ -#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ -#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ -#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ -#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ -#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ -#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ -#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ - - -#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/resource.h b/include/asm-powerpc/resource.h deleted file mode 100644 index 04bc4db8921b..000000000000 --- a/include/asm-powerpc/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-powerpc/rheap.h b/include/asm-powerpc/rheap.h deleted file mode 100644 index 172381769cfc..000000000000 --- a/include/asm-powerpc/rheap.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * include/asm-ppc/rheap.h - * - * Header file for the implementation of a remote heap. - * - * Author: Pantelis Antoniou - * - * 2004 (c) INTRACOM S.A. Greece. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASM_PPC_RHEAP_H__ -#define __ASM_PPC_RHEAP_H__ - -#include - -typedef struct _rh_block { - struct list_head list; - unsigned long start; - int size; - const char *owner; -} rh_block_t; - -typedef struct _rh_info { - unsigned int alignment; - int max_blocks; - int empty_slots; - rh_block_t *block; - struct list_head empty_list; - struct list_head free_list; - struct list_head taken_list; - unsigned int flags; -} rh_info_t; - -#define RHIF_STATIC_INFO 0x1 -#define RHIF_STATIC_BLOCK 0x2 - -typedef struct _rh_stats { - unsigned long start; - int size; - const char *owner; -} rh_stats_t; - -#define RHGS_FREE 0 -#define RHGS_TAKEN 1 - -/* Create a remote heap dynamically */ -extern rh_info_t *rh_create(unsigned int alignment); - -/* Destroy a remote heap, created by rh_create() */ -extern void rh_destroy(rh_info_t * info); - -/* Initialize in place a remote info block */ -extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, - rh_block_t * block); - -/* Attach a free region to manage */ -extern int rh_attach_region(rh_info_t * info, unsigned long start, int size); - -/* Detach a free region */ -extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size); - -/* Allocate the given size from the remote heap (with alignment) */ -extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, - const char *owner); - -/* Allocate the given size from the remote heap */ -extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner); - -/* Allocate the given size from the given address */ -extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, - const char *owner); - -/* Free the allocated area */ -extern int rh_free(rh_info_t * info, unsigned long start); - -/* Get stats for debugging purposes */ -extern int rh_get_stats(rh_info_t * info, int what, int max_stats, - rh_stats_t * stats); - -/* Simple dump of remote heap info */ -extern void rh_dump(rh_info_t * info); - -/* Set owner of taken block */ -extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner); - -#endif /* __ASM_PPC_RHEAP_H__ */ diff --git a/include/asm-powerpc/rio.h b/include/asm-powerpc/rio.h deleted file mode 100644 index 0018bf80cb25..000000000000 --- a/include/asm-powerpc/rio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * RapidIO architecture support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef ASM_PPC_RIO_H -#define ASM_PPC_RIO_H - -extern void platform_rio_init(void); - -#endif /* ASM_PPC_RIO_H */ diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h deleted file mode 100644 index 8eaa7b28d9d0..000000000000 --- a/include/asm-powerpc/rtas.h +++ /dev/null @@ -1,247 +0,0 @@ -#ifndef _POWERPC_RTAS_H -#define _POWERPC_RTAS_H -#ifdef __KERNEL__ - -#include -#include - -/* - * Definitions for talking to the RTAS on CHRP machines. - * - * Copyright (C) 2001 Peter Bergner - * Copyright (C) 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define RTAS_UNKNOWN_SERVICE (-1) -#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */ - -/* Buffer size for ppc_rtas system call. */ -#define RTAS_RMOBUF_MAX (64 * 1024) - -/* RTAS return status codes */ -#define RTAS_NOT_SUSPENDABLE -9004 -#define RTAS_BUSY -2 /* RTAS Busy */ -#define RTAS_EXTENDED_DELAY_MIN 9900 -#define RTAS_EXTENDED_DELAY_MAX 9905 - -/* - * In general to call RTAS use rtas_token("string") to lookup - * an RTAS token for the given string (e.g. "event-scan"). - * To actually perform the call use - * ret = rtas_call(token, n_in, n_out, ...) - * Where n_in is the number of input parameters and - * n_out is the number of output parameters - * - * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE - * will be returned as a token. rtas_call() does look for this - * token and error out gracefully so rtas_call(rtas_token("str"), ...) - * may be safely used for one-shot calls to RTAS. - * - */ - -typedef u32 rtas_arg_t; - -struct rtas_args { - u32 token; - u32 nargs; - u32 nret; - rtas_arg_t args[16]; - rtas_arg_t *rets; /* Pointer to return values in args[]. */ -}; - -struct rtas_t { - unsigned long entry; /* physical address pointer */ - unsigned long base; /* physical address pointer */ - unsigned long size; - spinlock_t lock; - struct rtas_args args; - struct device_node *dev; /* virtual address pointer */ -}; - -/* RTAS event classes */ -#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ -#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ -#define RTAS_POWERMGM_EVENTS 0x20000000 /* set bit 2 */ -#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ -#define RTAS_EVENT_SCAN_ALL_EVENTS 0xf0000000 - -/* RTAS event severity */ -#define RTAS_SEVERITY_FATAL 0x5 -#define RTAS_SEVERITY_ERROR 0x4 -#define RTAS_SEVERITY_ERROR_SYNC 0x3 -#define RTAS_SEVERITY_WARNING 0x2 -#define RTAS_SEVERITY_EVENT 0x1 -#define RTAS_SEVERITY_NO_ERROR 0x0 - -/* RTAS event disposition */ -#define RTAS_DISP_FULLY_RECOVERED 0x0 -#define RTAS_DISP_LIMITED_RECOVERY 0x1 -#define RTAS_DISP_NOT_RECOVERED 0x2 - -/* RTAS event initiator */ -#define RTAS_INITIATOR_UNKNOWN 0x0 -#define RTAS_INITIATOR_CPU 0x1 -#define RTAS_INITIATOR_PCI 0x2 -#define RTAS_INITIATOR_ISA 0x3 -#define RTAS_INITIATOR_MEMORY 0x4 -#define RTAS_INITIATOR_POWERMGM 0x5 - -/* RTAS event target */ -#define RTAS_TARGET_UNKNOWN 0x0 -#define RTAS_TARGET_CPU 0x1 -#define RTAS_TARGET_PCI 0x2 -#define RTAS_TARGET_ISA 0x3 -#define RTAS_TARGET_MEMORY 0x4 -#define RTAS_TARGET_POWERMGM 0x5 - -/* RTAS event type */ -#define RTAS_TYPE_RETRY 0x01 -#define RTAS_TYPE_TCE_ERR 0x02 -#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 -#define RTAS_TYPE_TIMEOUT 0x04 -#define RTAS_TYPE_DATA_PARITY 0x05 -#define RTAS_TYPE_ADDR_PARITY 0x06 -#define RTAS_TYPE_CACHE_PARITY 0x07 -#define RTAS_TYPE_ADDR_INVALID 0x08 -#define RTAS_TYPE_ECC_UNCORR 0x09 -#define RTAS_TYPE_ECC_CORR 0x0a -#define RTAS_TYPE_EPOW 0x40 -#define RTAS_TYPE_PLATFORM 0xE0 -#define RTAS_TYPE_IO 0xE1 -#define RTAS_TYPE_INFO 0xE2 -#define RTAS_TYPE_DEALLOC 0xE3 -#define RTAS_TYPE_DUMP 0xE4 -/* I don't add PowerMGM events right now, this is a different topic */ -#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 -#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 -#define RTAS_TYPE_PMGM_LID_OPEN 0x62 -#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 -#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 -#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 -#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 -#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 -#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 -#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 -#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a -#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b -#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c -#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d -#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e -#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f -#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 -#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 - -struct rtas_error_log { - unsigned long version:8; /* Architectural version */ - unsigned long severity:3; /* Severity level of error */ - unsigned long disposition:2; /* Degree of recovery */ - unsigned long extended:1; /* extended log present? */ - unsigned long /* reserved */ :2; /* Reserved for future use */ - unsigned long initiator:4; /* Initiator of event */ - unsigned long target:4; /* Target of failed operation */ - unsigned long type:8; /* General event or error*/ - unsigned long extended_log_length:32; /* length in bytes */ - unsigned char buffer[1]; -}; - -/* - * This can be set by the rtas_flash module so that it can get called - * as the absolutely last thing before the kernel terminates. - */ -extern void (*rtas_flash_term_hook)(int); - -extern struct rtas_t rtas; - -extern void enter_rtas(unsigned long); -extern int rtas_token(const char *service); -extern int rtas_service_present(const char *service); -extern int rtas_call(int token, int, int, int *, ...); -extern void rtas_restart(char *cmd); -extern void rtas_power_off(void); -extern void rtas_halt(void); -extern void rtas_os_term(char *str); -extern int rtas_get_sensor(int sensor, int index, int *state); -extern int rtas_get_power_level(int powerdomain, int *level); -extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); -extern int rtas_set_indicator(int indicator, int index, int new_value); -extern int rtas_set_indicator_fast(int indicator, int index, int new_value); -extern void rtas_progress(char *s, unsigned short hex); -extern void rtas_initialize(void); - -struct rtc_time; -extern unsigned long rtas_get_boot_time(void); -extern void rtas_get_rtc_time(struct rtc_time *rtc_time); -extern int rtas_set_rtc_time(struct rtc_time *rtc_time); - -extern unsigned int rtas_busy_delay_time(int status); -extern unsigned int rtas_busy_delay(int status); - -extern int early_init_dt_scan_rtas(unsigned long node, - const char *uname, int depth, void *data); - -extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); - -/* Error types logged. */ -#define ERR_FLAG_ALREADY_LOGGED 0x0 -#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ -#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ -#define ERR_TYPE_KERNEL_PANIC 0x4 /* from panic() */ - -/* All the types and not flags */ -#define ERR_TYPE_MASK (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC) - -#define RTAS_DEBUG KERN_DEBUG "RTAS: " - -#define RTAS_ERROR_LOG_MAX 2048 - -/* - * Return the firmware-specified size of the error log buffer - * for all rtas calls that require an error buffer argument. - * This includes 'check-exception' and 'rtas-last-error'. - */ -extern int rtas_get_error_log_max(void); - -/* Event Scan Parameters */ -#define EVENT_SCAN_ALL_EVENTS 0xf0000000 -#define SURVEILLANCE_TOKEN 9000 -#define LOG_NUMBER 64 /* must be a power of two */ -#define LOG_NUMBER_MASK (LOG_NUMBER-1) - -/* Some RTAS ops require a data buffer and that buffer must be < 4G. - * Rather than having a memory allocator, just use this buffer - * (get the lock first), make the RTAS call. Copy the data instead - * of holding the buffer for long. - */ - -#define RTAS_DATA_BUF_SIZE 4096 -extern spinlock_t rtas_data_buf_lock; -extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; - -/* RMO buffer reserved for user-space RTAS use */ -extern unsigned long rtas_rmo_buf; - -#define GLOBAL_INTERRUPT_QUEUE 9005 - -/** - * rtas_config_addr - Format a busno, devfn and reg for RTAS. - * @busno: The bus number. - * @devfn: The device and function number as encoded by PCI_DEVFN(). - * @reg: The register number. - * - * This function encodes the given busno, devfn and register number as - * required for RTAS calls that take a "config_addr" parameter. - * See PAPR requirement 7.3.4-1 for more info. - */ -static inline u32 rtas_config_addr(int busno, int devfn, int reg) -{ - return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | - (devfn << 8) | (reg & 0xff); -} - -#endif /* __KERNEL__ */ -#endif /* _POWERPC_RTAS_H */ diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h deleted file mode 100644 index f5802926b6c0..000000000000 --- a/include/asm-powerpc/rtc.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Real-time clock definitions and interfaces - * - * Author: Tom Rini - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Based on: - * include/asm-m68k/rtc.h - * - * Copyright Richard Zidlicky - * implementation details for genrtc/q40rtc driver - * - * And the old drivers/macintosh/rtc.c which was heavily based on: - * Linux/SPARC Real Time Clock Driver - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - * - * With additional work by Paul Mackerras and Franz Sirl. - */ - -#ifndef __ASM_POWERPC_RTC_H__ -#define __ASM_POWERPC_RTC_H__ - -#ifdef __KERNEL__ - -#include - -#include -#include - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - if (ppc_md.get_rtc_time) - ppc_md.get_rtc_time(time); - return RTC_24H; -} - -/* Set the current date and time in the real time clock. */ -static inline int set_rtc_time(struct rtc_time *time) -{ - if (ppc_md.set_rtc_time) - return ppc_md.set_rtc_time(time); - return -EINVAL; -} - -static inline unsigned int get_rtc_ss(void) -{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/include/asm-powerpc/rwsem.h b/include/asm-powerpc/rwsem.h deleted file mode 100644 index a6cc93b78b98..000000000000 --- a/include/asm-powerpc/rwsem.h +++ /dev/null @@ -1,173 +0,0 @@ -#ifndef _ASM_POWERPC_RWSEM_H -#define _ASM_POWERPC_RWSEM_H - -#ifndef _LINUX_RWSEM_H -#error "Please don't include directly, use instead." -#endif - -#ifdef __KERNEL__ - -/* - * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff - * in lib/rwsem.c. Adapted largely from include/asm-i386/rwsem.h - * by Paul Mackerras . - */ - -#include -#include -#include -#include - -/* - * the semaphore definition - */ -struct rw_semaphore { - /* XXX this should be able to be an atomic_t -- paulus */ - signed int count; -#define RWSEM_UNLOCKED_VALUE 0x00000000 -#define RWSEM_ACTIVE_BIAS 0x00000001 -#define RWSEM_ACTIVE_MASK 0x0000ffff -#define RWSEM_WAITING_BIAS (-0x00010000) -#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS -#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) - spinlock_t wait_lock; - struct list_head wait_list; -#ifdef CONFIG_DEBUG_LOCK_ALLOC - struct lockdep_map dep_map; -#endif -}; - -#ifdef CONFIG_DEBUG_LOCK_ALLOC -# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } -#else -# define __RWSEM_DEP_MAP_INIT(lockname) -#endif - -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } - -#define DECLARE_RWSEM(name) \ - struct rw_semaphore name = __RWSEM_INITIALIZER(name) - -extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); -extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); - -extern void __init_rwsem(struct rw_semaphore *sem, const char *name, - struct lock_class_key *key); - -#define init_rwsem(sem) \ - do { \ - static struct lock_class_key __key; \ - \ - __init_rwsem((sem), #sem, &__key); \ - } while (0) - -/* - * lock for reading - */ -static inline void __down_read(struct rw_semaphore *sem) -{ - if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0)) - rwsem_down_read_failed(sem); -} - -static inline int __down_read_trylock(struct rw_semaphore *sem) -{ - int tmp; - - while ((tmp = sem->count) >= 0) { - if (tmp == cmpxchg(&sem->count, tmp, - tmp + RWSEM_ACTIVE_READ_BIAS)) { - return 1; - } - } - return 0; -} - -/* - * lock for writing - */ -static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) -{ - int tmp; - - tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)); - if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS)) - rwsem_down_write_failed(sem); -} - -static inline void __down_write(struct rw_semaphore *sem) -{ - __down_write_nested(sem, 0); -} - -static inline int __down_write_trylock(struct rw_semaphore *sem) -{ - int tmp; - - tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, - RWSEM_ACTIVE_WRITE_BIAS); - return tmp == RWSEM_UNLOCKED_VALUE; -} - -/* - * unlock after reading - */ -static inline void __up_read(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_dec_return((atomic_t *)(&sem->count)); - if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)) - rwsem_wake(sem); -} - -/* - * unlock after writing - */ -static inline void __up_write(struct rw_semaphore *sem) -{ - if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, - (atomic_t *)(&sem->count)) < 0)) - rwsem_wake(sem); -} - -/* - * implement atomic add functionality - */ -static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) -{ - atomic_add(delta, (atomic_t *)(&sem->count)); -} - -/* - * downgrade write lock to read lock - */ -static inline void __downgrade_write(struct rw_semaphore *sem) -{ - int tmp; - - tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); - if (tmp < 0) - rwsem_downgrade_wake(sem); -} - -/* - * implement exchange and add functionality - */ -static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) -{ - return atomic_add_return(delta, (atomic_t *)(&sem->count)); -} - -static inline int rwsem_is_locked(struct rw_semaphore *sem) -{ - return (sem->count != 0); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_RWSEM_H */ diff --git a/include/asm-powerpc/scatterlist.h b/include/asm-powerpc/scatterlist.h deleted file mode 100644 index fcf7d55afe45..000000000000 --- a/include/asm-powerpc/scatterlist.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef _ASM_POWERPC_SCATTERLIST_H -#define _ASM_POWERPC_SCATTERLIST_H -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ -#include -#include - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - /* For TCE support */ - dma_addr_t dma_address; - u32 dma_length; -}; - -/* - * These macros should be used after a dma_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#ifdef __powerpc64__ -#define sg_dma_len(sg) ((sg)->dma_length) -#else -#define sg_dma_len(sg) ((sg)->length) -#endif - -#ifdef __powerpc64__ -#define ISA_DMA_THRESHOLD (~0UL) -#endif - -#define ARCH_HAS_SG_CHAIN - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/include/asm-powerpc/seccomp.h b/include/asm-powerpc/seccomp.h deleted file mode 100644 index 853765eb1f65..000000000000 --- a/include/asm-powerpc/seccomp.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SECCOMP_H -#define _ASM_POWERPC_SECCOMP_H - -#ifdef __KERNEL__ -#include -#endif - -#include - -#define __NR_seccomp_read __NR_read -#define __NR_seccomp_write __NR_write -#define __NR_seccomp_exit __NR_exit -#define __NR_seccomp_sigreturn __NR_rt_sigreturn - -#define __NR_seccomp_read_32 __NR_read -#define __NR_seccomp_write_32 __NR_write -#define __NR_seccomp_exit_32 __NR_exit -#define __NR_seccomp_sigreturn_32 __NR_sigreturn - -#endif /* _ASM_POWERPC_SECCOMP_H */ diff --git a/include/asm-powerpc/sections.h b/include/asm-powerpc/sections.h deleted file mode 100644 index 916018e425c4..000000000000 --- a/include/asm-powerpc/sections.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASM_POWERPC_SECTIONS_H -#define _ASM_POWERPC_SECTIONS_H -#ifdef __KERNEL__ - -#include - -#ifdef __powerpc64__ - -extern char _end[]; - -static inline int in_kernel_text(unsigned long addr) -{ - if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) - return 1; - - return 0; -} - -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SECTIONS_H */ diff --git a/include/asm-powerpc/sembuf.h b/include/asm-powerpc/sembuf.h deleted file mode 100644 index 99a41938ae3d..000000000000 --- a/include/asm-powerpc/sembuf.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _ASM_POWERPC_SEMBUF_H -#define _ASM_POWERPC_SEMBUF_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * The semid64_ds structure for PPC architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifndef __powerpc64__ - unsigned long __unused1; -#endif - __kernel_time_t sem_otime; /* last semop time */ -#ifndef __powerpc64__ - unsigned long __unused2; -#endif - __kernel_time_t sem_ctime; /* last change time */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_POWERPC_SEMBUF_H */ diff --git a/include/asm-powerpc/serial.h b/include/asm-powerpc/serial.h deleted file mode 100644 index 3e8589b43cb2..000000000000 --- a/include/asm-powerpc/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_SERIAL_H -#define _ASM_POWERPC_SERIAL_H - -/* - * Serial ports are not listed here, because they are discovered - * through the device tree. - */ - -/* Default baud base if not found in device-tree */ -#define BASE_BAUD ( 1843200 / 16 ) - -#ifdef CONFIG_PPC_UDBG_16550 -extern void find_legacy_serial_ports(void); -#else -#define find_legacy_serial_ports() do { } while (0) -#endif - -#endif /* _PPC64_SERIAL_H */ diff --git a/include/asm-powerpc/setjmp.h b/include/asm-powerpc/setjmp.h deleted file mode 100644 index 279d03a1eec6..000000000000 --- a/include/asm-powerpc/setjmp.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright © 2008 Michael Neuling IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _ASM_POWERPC_SETJMP_H -#define _ASM_POWERPC_SETJMP_H - -#define JMP_BUF_LEN 23 - -extern long setjmp(long *); -extern void longjmp(long *, long); - -#endif /* _ASM_POWERPC_SETJMP_H */ diff --git a/include/asm-powerpc/setup.h b/include/asm-powerpc/setup.h deleted file mode 100644 index 817fac0a0714..000000000000 --- a/include/asm-powerpc/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_SETUP_H -#define _ASM_POWERPC_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#endif /* _ASM_POWERPC_SETUP_H */ diff --git a/include/asm-powerpc/shmbuf.h b/include/asm-powerpc/shmbuf.h deleted file mode 100644 index 8efa39698b6c..000000000000 --- a/include/asm-powerpc/shmbuf.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _ASM_POWERPC_SHMBUF_H -#define _ASM_POWERPC_SHMBUF_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * The shmid64_ds structure for PPC architecture. - * - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ -#ifndef __powerpc64__ - unsigned long __unused1; -#endif - __kernel_time_t shm_atime; /* last attach time */ -#ifndef __powerpc64__ - unsigned long __unused2; -#endif - __kernel_time_t shm_dtime; /* last detach time */ -#ifndef __powerpc64__ - unsigned long __unused3; -#endif - __kernel_time_t shm_ctime; /* last change time */ -#ifndef __powerpc64__ - unsigned long __unused4; -#endif - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused5; - unsigned long __unused6; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_POWERPC_SHMBUF_H */ diff --git a/include/asm-powerpc/shmparam.h b/include/asm-powerpc/shmparam.h deleted file mode 100644 index 5cda42a6d39e..000000000000 --- a/include/asm-powerpc/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_POWERPC_SHMPARAM_H -#define _ASM_POWERPC_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_POWERPC_SHMPARAM_H */ diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h deleted file mode 100644 index 9c1f24fd5d11..000000000000 --- a/include/asm-powerpc/sigcontext.h +++ /dev/null @@ -1,87 +0,0 @@ -#ifndef _ASM_POWERPC_SIGCONTEXT_H -#define _ASM_POWERPC_SIGCONTEXT_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include -#include -#ifdef __powerpc64__ -#include -#endif - -struct sigcontext { - unsigned long _unused[4]; - int signal; -#ifdef __powerpc64__ - int _pad0; -#endif - unsigned long handler; - unsigned long oldmask; - struct pt_regs __user *regs; -#ifdef __powerpc64__ - elf_gregset_t gp_regs; - elf_fpregset_t fp_regs; -/* - * To maintain compatibility with current implementations the sigcontext is - * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t) - * followed by an unstructured (vmx_reserve) field of 69 doublewords. This - * allows the array of vector registers to be quadword aligned independent of - * the alignment of the containing sigcontext or ucontext. It is the - * responsibility of the code setting the sigcontext to set this pointer to - * either NULL (if this processor does not support the VMX feature) or the - * address of the first quadword within the allocated (vmx_reserve) area. - * - * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with - * an array of 34 quadword entries (elf_vrregset_t). The entries with - * indexes 0-31 contain the corresponding vector registers. The entry with - * index 32 contains the vscr as the last word (offset 12) within the - * quadword. This allows the vscr to be stored as either a quadword (since - * it must be copied via a vector register to/from storage) or as a word. - * The entry with index 33 contains the vrsave as the first word (offset 0) - * within the quadword. - * - * Part of the VSX data is stored here also by extending vmx_restore - * by an additional 32 double words. Architecturally the layout of - * the VSR registers and how they overlap on top of the legacy FPR and - * VR registers is shown below: - * - * VSR doubleword 0 VSR doubleword 1 - * ---------------------------------------------------------------- - * VSR[0] | FPR[0] | | - * ---------------------------------------------------------------- - * VSR[1] | FPR[1] | | - * ---------------------------------------------------------------- - * | ... | | - * | ... | | - * ---------------------------------------------------------------- - * VSR[30] | FPR[30] | | - * ---------------------------------------------------------------- - * VSR[31] | FPR[31] | | - * ---------------------------------------------------------------- - * VSR[32] | VR[0] | - * ---------------------------------------------------------------- - * VSR[33] | VR[1] | - * ---------------------------------------------------------------- - * | ... | - * | ... | - * ---------------------------------------------------------------- - * VSR[62] | VR[30] | - * ---------------------------------------------------------------- - * VSR[63] | VR[31] | - * ---------------------------------------------------------------- - * - * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 - * is stored at the start of vmx_reserve. vmx_reserve is extended for - * backwards compatility to store VSR 0-31 doubleword 1 after the VMX - * registers and vscr/vrsave. - */ - elf_vrreg_t __user *v_regs; - long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; -#endif -}; - -#endif /* _ASM_POWERPC_SIGCONTEXT_H */ diff --git a/include/asm-powerpc/siginfo.h b/include/asm-powerpc/siginfo.h deleted file mode 100644 index 12f1bce037be..000000000000 --- a/include/asm-powerpc/siginfo.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _ASM_POWERPC_SIGINFO_H -#define _ASM_POWERPC_SIGINFO_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __powerpc64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) -# define SI_PAD_SIZE32 ((SI_MAX_SIZE/sizeof(int)) - 3) -#endif - -#include - -/* - * SIGTRAP si_codes - */ -#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */ -#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */ -#undef NSIGTRAP -#define NSIGTRAP 4 - -#endif /* _ASM_POWERPC_SIGINFO_H */ diff --git a/include/asm-powerpc/signal.h b/include/asm-powerpc/signal.h deleted file mode 100644 index a7360cdd99eb..000000000000 --- a/include/asm-powerpc/signal.h +++ /dev/null @@ -1,150 +0,0 @@ -#ifndef _ASM_POWERPC_SIGNAL_H -#define _ASM_POWERPC_SIGNAL_H - -#include - -#define _NSIG 64 -#ifdef __powerpc64__ -#define _NSIG_BPW 64 -#else -#define _NSIG_BPW 32 -#endif -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK is not currently supported, but will allow sigaltstack(2). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001U -#define SA_NOCLDWAIT 0x00000002U -#define SA_SIGINFO 0x00000004U -#define SA_ONSTACK 0x08000000U -#define SA_RESTART 0x10000000U -#define SA_NODEFER 0x40000000U -#define SA_RESETHAND 0x80000000U - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000U - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - __sigrestore_t sa_restorer; -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - __sigrestore_t sa_restorer; - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ -struct pt_regs; -extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags); -#define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif /* __KERNEL__ */ - -#ifndef __powerpc64__ -/* - * These are parameters to dbg_sigreturn syscall. They enable or - * disable certain debugging things that can be done from signal - * handlers. The dbg_sigreturn syscall *must* be called from a - * SA_SIGINFO signal so the ucontext can be passed to it. It takes an - * array of struct sig_dbg_op, which has the debug operations to - * perform before returning from the signal. - */ -struct sig_dbg_op { - int dbg_type; - unsigned long dbg_value; -}; - -/* Enable or disable single-stepping. The value sets the state. */ -#define SIG_DBG_SINGLE_STEPPING 1 - -/* Enable or disable branch tracing. The value sets the state. */ -#define SIG_DBG_BRANCH_TRACING 2 -#endif /* ! __powerpc64__ */ - -#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h deleted file mode 100644 index 4d28e1e4521b..000000000000 --- a/include/asm-powerpc/smp.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * smp.h: PowerPC-specific SMP code. - * - * Original was a copy of sparc smp.h. Now heavily modified - * for PPC. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996-2001 Cort Dougan - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_SMP_H -#define _ASM_POWERPC_SMP_H -#ifdef __KERNEL__ - -#include -#include -#include - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PPC64 -#include -#endif -#include - -extern int boot_cpuid; - -extern void cpu_die(void); - -#ifdef CONFIG_SMP - -extern void smp_send_debugger_break(int cpu); -extern void smp_message_recv(int); - -DECLARE_PER_CPU(unsigned int, pvr); - -#ifdef CONFIG_HOTPLUG_CPU -extern void fixup_irqs(cpumask_t map); -int generic_cpu_disable(void); -int generic_cpu_enable(unsigned int cpu); -void generic_cpu_die(unsigned int cpu); -void generic_mach_cpu_die(void); -#endif - -#ifdef CONFIG_PPC64 -#define raw_smp_processor_id() (local_paca->paca_index) -#define hard_smp_processor_id() (get_paca()->hw_cpu_id) -#else -/* 32-bit */ -extern int smp_hw_index[]; - -#define raw_smp_processor_id() (current_thread_info()->cpu) -#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) -#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) -#define set_hard_smp_processor_id(cpu, phys)\ - (smp_hw_index[(cpu)] = (phys)) -#endif - -DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); -DECLARE_PER_CPU(cpumask_t, cpu_core_map); -extern int cpu_to_core_id(int cpu); - -/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. - * - * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up - * in /proc/interrupts will be wrong!!! --Troy */ -#define PPC_MSG_CALL_FUNCTION 0 -#define PPC_MSG_RESCHEDULE 1 -#define PPC_MSG_CALL_FUNC_SINGLE 2 -#define PPC_MSG_DEBUGGER_BREAK 3 - -void smp_init_iSeries(void); -void smp_init_pSeries(void); -void smp_init_cell(void); -void smp_init_celleb(void); -void smp_setup_cpu_maps(void); -void smp_setup_cpu_sibling_map(void); - -extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); - -#else -/* for UP */ -#define hard_smp_processor_id() 0 -#define smp_setup_cpu_maps() - -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_PPC64 -#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id) -#define set_hard_smp_processor_id(CPU, VAL) \ - do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0) - -extern void smp_release_cpus(void); - -#else -/* 32-bit */ -#ifndef CONFIG_SMP -extern int boot_cpuid_phys; -#define get_hard_smp_processor_id(cpu) boot_cpuid_phys -#define set_hard_smp_processor_id(cpu, phys) -#endif -#endif - -extern int smt_enabled_at_boot; - -extern int smp_mpic_probe(void); -extern void smp_mpic_setup_cpu(int cpu); -extern void smp_generic_kick_cpu(int nr); - -extern void smp_generic_give_timebase(void); -extern void smp_generic_take_timebase(void); - -extern struct smp_ops_t *smp_ops; - -extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h deleted file mode 100644 index 7ae2753da565..000000000000 --- a/include/asm-powerpc/smu.h +++ /dev/null @@ -1,700 +0,0 @@ -#ifndef _SMU_H -#define _SMU_H - -/* - * Definitions for talking to the SMU chip in newer G5 PowerMacs - */ -#ifdef __KERNEL__ -#include -#endif -#include - -/* - * Known SMU commands - * - * Most of what is below comes from looking at the Open Firmware driver, - * though this is still incomplete and could use better documentation here - * or there... - */ - - -/* - * Partition info commands - * - * These commands are used to retrieve the sdb-partition-XX datas from - * the SMU. The length is always 2. First byte is the subcommand code - * and second byte is the partition ID. - * - * The reply is 6 bytes: - * - * - 0..1 : partition address - * - 2 : a byte containing the partition ID - * - 3 : length (maybe other bits are rest of header ?) - * - * The data must then be obtained with calls to another command: - * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). - */ -#define SMU_CMD_PARTITION_COMMAND 0x3e -#define SMU_CMD_PARTITION_LATEST 0x01 -#define SMU_CMD_PARTITION_BASE 0x02 -#define SMU_CMD_PARTITION_UPDATE 0x03 - - -/* - * Fan control - * - * This is a "mux" for fan control commands. The command seem to - * act differently based on the number of arguments. With 1 byte - * of argument, this seem to be queries for fans status, setpoint, - * etc..., while with 0xe arguments, we will set the fans speeds. - * - * Queries (1 byte arg): - * --------------------- - * - * arg=0x01: read RPM fans status - * arg=0x02: read RPM fans setpoint - * arg=0x11: read PWM fans status - * arg=0x12: read PWM fans setpoint - * - * the "status" queries return the current speed while the "setpoint" ones - * return the programmed/target speed. It _seems_ that the result is a bit - * mask in the first byte of active/available fans, followed by 6 words (16 - * bits) containing the requested speed. - * - * Setpoint (14 bytes arg): - * ------------------------ - * - * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the - * mask of fans affected by the command. Followed by 6 words containing the - * setpoint value for selected fans in the mask (or 0 if mask value is 0) - */ -#define SMU_CMD_FAN_COMMAND 0x4a - - -/* - * Battery access - * - * Same command number as the PMU, could it be same syntax ? - */ -#define SMU_CMD_BATTERY_COMMAND 0x6f -#define SMU_CMD_GET_BATTERY_INFO 0x00 - -/* - * Real time clock control - * - * This is a "mux", first data byte contains the "sub" command. - * The "RTC" part of the SMU controls the date, time, powerup - * timer, but also a PRAM - * - * Dates are in BCD format on 7 bytes: - * [sec] [min] [hour] [weekday] [month day] [month] [year] - * with month being 1 based and year minus 100 - */ -#define SMU_CMD_RTC_COMMAND 0x8e -#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ -#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 -#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ -#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ -#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ -#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ -#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ -#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ - - /* - * i2c commands - * - * To issue an i2c command, first is to send a parameter block to the - * the SMU. This is a command of type 0x9a with 9 bytes of header - * eventually followed by data for a write: - * - * 0: bus number (from device-tree usually, SMU has lots of busses !) - * 1: transfer type/format (see below) - * 2: device address. For combined and combined4 type transfers, this - * is the "write" version of the address (bit 0x01 cleared) - * 3: subaddress length (0..3) - * 4: subaddress byte 0 (or only byte for subaddress length 1) - * 5: subaddress byte 1 - * 6: subaddress byte 2 - * 7: combined address (device address for combined mode data phase) - * 8: data length - * - * The transfer types are the same good old Apple ones it seems, - * that is: - * - 0x00: Simple transfer - * - 0x01: Subaddress transfer (addr write + data tx, no restart) - * - 0x02: Combined transfer (addr write + restart + data tx) - * - * This is then followed by actual data for a write. - * - * At this point, the OF driver seems to have a limitation on transfer - * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know - * wether this is just an OF limit due to some temporary buffer size - * or if this is an SMU imposed limit. This driver has the same limitation - * for now as I use a 0x10 bytes temporary buffer as well - * - * Once that is completed, a response is expected from the SMU. This is - * obtained via a command of type 0x9a with a length of 1 byte containing - * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's - * though I can't tell yet if this is actually necessary. Once this command - * is complete, at this point, all I can tell is what OF does. OF tests - * byte 0 of the reply: - * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? - * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) - * - on write, < 0 -> failure (immediate exit) - * - else, OF just exists (without error, weird) - * - * So on read, there is this wait-for-busy thing when getting a 0xfc or - * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and - * doing the above again until either the retries expire or the result - * is no longer 0xfe or 0xfc - * - * The Darwin I2C driver is less subtle though. On any non-success status - * from the response command, it waits 5ms and tries again up to 20 times, - * it doesn't differenciate between fatal errors or "busy" status. - * - * This driver provides an asynchronous paramblock based i2c command - * interface to be used either directly by low level code or by a higher - * level driver interfacing to the linux i2c layer. The current - * implementation of this relies on working timers & timer interrupts - * though, so be careful of calling context for now. This may be "fixed" - * in the future by adding a polling facility. - */ -#define SMU_CMD_I2C_COMMAND 0x9a - /* transfer types */ -#define SMU_I2C_TRANSFER_SIMPLE 0x00 -#define SMU_I2C_TRANSFER_STDSUB 0x01 -#define SMU_I2C_TRANSFER_COMBINED 0x02 - -/* - * Power supply control - * - * The "sub" command is an ASCII string in the data, the - * data length is that of the string. - * - * The VSLEW command can be used to get or set the voltage slewing. - * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of - * reply at data offset 6, 7 and 8. - * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is - * used to set the voltage slewing point. The SMU replies with "DONE" - * I yet have to figure out their exact meaning of those 3 bytes in - * both cases. They seem to be: - * x = processor mask - * y = op. point index - * z = processor freq. step index - * I haven't yet decyphered result codes - * - */ -#define SMU_CMD_POWER_COMMAND 0xaa -#define SMU_CMD_POWER_RESTART "RESTART" -#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" -#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" - -/* - * Read ADC sensors - * - * This command takes one byte of parameter: the sensor ID (or "reg" - * value in the device-tree) and returns a 16 bits value - */ -#define SMU_CMD_READ_ADC 0xd8 - - -/* Misc commands - * - * This command seem to be a grab bag of various things - * - * Parameters: - * 1: subcommand - */ -#define SMU_CMD_MISC_df_COMMAND 0xdf - -/* - * Sets "system ready" status - * - * I did not yet understand how it exactly works or what it does. - * - * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used - * the same codebase for all OF versions. On PowerBooks, this command would - * enable the backlight. For the G5s, it only activates the front LED. However, - * don't take this for granted. - * - * Parameters: - * 2: status [0x00, 0x01 or 0x02] - */ -#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 - -/* - * Sets mode of power switch. - * - * What this actually does is not yet known. Maybe it enables some interrupt. - * - * Parameters: - * 2: enable power switch? [0x00 or 0x01] - * 3 (optional): enable nmi? [0x00 or 0x01] - * - * Returns: - * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether - * NMI is enabled. Otherwise unknown. - */ -#define SMU_CMD_MISC_df_NMI_OPTION 0x04 - -/* Sets LED dimm offset. - * - * The front LED dimms itself during sleep. Its brightness (or, well, the PWM - * frequency) depends on current time. Therefore, the SMU needs to know the - * timezone. - * - * Parameters: - * 2-8: unknown (BCD coding) - */ -#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99 - - -/* - * Version info commands - * - * Parameters: - * 1 (optional): Specifies version part to retrieve - * - * Returns: - * Version value - */ -#define SMU_CMD_VERSION_COMMAND 0xea -#define SMU_VERSION_RUNNING 0x00 -#define SMU_VERSION_BASE 0x01 -#define SMU_VERSION_UPDATE 0x02 - - -/* - * Switches - * - * These are switches whose status seems to be known to the SMU. - * - * Parameters: - * none - * - * Result: - * Switch bits (ORed, see below) - */ -#define SMU_CMD_SWITCHES 0xdc - -/* Switches bits */ -#define SMU_SWITCH_CASE_CLOSED 0x01 -#define SMU_SWITCH_AC_POWER 0x04 -#define SMU_SWITCH_POWER_SWITCH 0x08 - - -/* - * Misc commands - * - * This command seem to be a grab bag of various things - * - * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to - * transfer blocks of data from the SMU. So far, I've decrypted it's - * usage to retrieve partition data. In order to do that, you have to - * break your transfer in "chunks" since that command cannot transfer - * more than a chunk at a time. The chunk size used by OF is 0xe bytes, - * but it seems that the darwin driver will let you do 0x1e bytes if - * your "PMU" version is >= 0x30. You can get the "PMU" version apparently - * either in the last 16 bits of property "smu-version-pmu" or as the 16 - * bytes at offset 1 of "smu-version-info" - * - * For each chunk, the command takes 7 bytes of arguments: - * byte 0: subcommand code (0x02) - * byte 1: 0x04 (always, I don't know what it means, maybe the address - * space to use or some other nicety. It's hard coded in OF) - * byte 2..5: SMU address of the chunk (big endian 32 bits) - * byte 6: size to transfer (up to max chunk size) - * - * The data is returned directly - */ -#define SMU_CMD_MISC_ee_COMMAND 0xee -#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 - -/* Retrieves currently used watts. - * - * Parameters: - * 1: 0x03 (Meaning unknown) - */ -#define SMU_CMD_MISC_ee_GET_WATTS 0x03 - -#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ -#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ - - -/* - * Power related commands - * - * Parameters: - * 1: subcommand - */ -#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f - -/* SMU_POWER_EVENTS subcommands */ -enum { - SMU_PWR_GET_POWERUP_EVENTS = 0x00, - SMU_PWR_SET_POWERUP_EVENTS = 0x01, - SMU_PWR_CLR_POWERUP_EVENTS = 0x02, - SMU_PWR_GET_WAKEUP_EVENTS = 0x03, - SMU_PWR_SET_WAKEUP_EVENTS = 0x04, - SMU_PWR_CLR_WAKEUP_EVENTS = 0x05, - - /* - * Get last shutdown cause - * - * Returns: - * 1 byte (signed char): Last shutdown cause. Exact meaning unknown. - */ - SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07, - - /* - * Sets or gets server ID. Meaning or use is unknown. - * - * Parameters: - * 2 (optional): Set server ID (1 byte) - * - * Returns: - * 1 byte (server ID?) - */ - SMU_PWR_SERVER_ID = 0x08, -}; - -/* Power events wakeup bits */ -enum { - SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ - SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ - SMU_PWR_WAKEUP_AC_CHANGE = 0x04, - SMU_PWR_WAKEUP_LID_OPEN = 0x08, - SMU_PWR_WAKEUP_RING = 0x10, -}; - - -/* - * - Kernel side interface - - */ - -#ifdef __KERNEL__ - -/* - * Asynchronous SMU commands - * - * Fill up this structure and submit it via smu_queue_command(), - * and get notified by the optional done() callback, or because - * status becomes != 1 - */ - -struct smu_cmd; - -struct smu_cmd -{ - /* public */ - u8 cmd; /* command */ - int data_len; /* data len */ - int reply_len; /* reply len */ - void *data_buf; /* data buffer */ - void *reply_buf; /* reply buffer */ - int status; /* command status */ - void (*done)(struct smu_cmd *cmd, void *misc); - void *misc; - - /* private */ - struct list_head link; -}; - -/* - * Queues an SMU command, all fields have to be initialized - */ -extern int smu_queue_cmd(struct smu_cmd *cmd); - -/* - * Simple command wrapper. This structure embeds a small buffer - * to ease sending simple SMU commands from the stack - */ -struct smu_simple_cmd -{ - struct smu_cmd cmd; - u8 buffer[16]; -}; - -/* - * Queues a simple command. All fields will be initialized by that - * function - */ -extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, - unsigned int data_len, - void (*done)(struct smu_cmd *cmd, void *misc), - void *misc, - ...); - -/* - * Completion helper. Pass it to smu_queue_simple or as 'done' - * member to smu_queue_cmd, it will call complete() on the struct - * completion passed in the "misc" argument - */ -extern void smu_done_complete(struct smu_cmd *cmd, void *misc); - -/* - * Synchronous helpers. Will spin-wait for completion of a command - */ -extern void smu_spinwait_cmd(struct smu_cmd *cmd); - -static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) -{ - smu_spinwait_cmd(&scmd->cmd); -} - -/* - * Poll routine to call if blocked with irqs off - */ -extern void smu_poll(void); - - -/* - * Init routine, presence check.... - */ -extern int smu_init(void); -extern int smu_present(void); -struct of_device; -extern struct of_device *smu_get_ofdev(void); - - -/* - * Common command wrappers - */ -extern void smu_shutdown(void); -extern void smu_restart(void); -struct rtc_time; -extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); -extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); - -/* - * SMU command buffer absolute address, exported by pmac_setup, - * this is allocated very early during boot. - */ -extern unsigned long smu_cmdbuf_abs; - - -/* - * Kenrel asynchronous i2c interface - */ - -#define SMU_I2C_READ_MAX 0x1d -#define SMU_I2C_WRITE_MAX 0x15 - -/* SMU i2c header, exactly matches i2c header on wire */ -struct smu_i2c_param -{ - u8 bus; /* SMU bus ID (from device tree) */ - u8 type; /* i2c transfer type */ - u8 devaddr; /* device address (includes direction) */ - u8 sublen; /* subaddress length */ - u8 subaddr[3]; /* subaddress */ - u8 caddr; /* combined address, filled by SMU driver */ - u8 datalen; /* length of transfer */ - u8 data[SMU_I2C_READ_MAX]; /* data */ -}; - -struct smu_i2c_cmd -{ - /* public */ - struct smu_i2c_param info; - void (*done)(struct smu_i2c_cmd *cmd, void *misc); - void *misc; - int status; /* 1 = pending, 0 = ok, <0 = fail */ - - /* private */ - struct smu_cmd scmd; - int read; - int stage; - int retries; - u8 pdata[32]; - struct list_head link; -}; - -/* - * Call this to queue an i2c command to the SMU. You must fill info, - * including info.data for a write, done and misc. - * For now, no polling interface is provided so you have to use completion - * callback. - */ -extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); - - -#endif /* __KERNEL__ */ - - -/* - * - SMU "sdb" partitions informations - - */ - - -/* - * Partition header format - */ -struct smu_sdbp_header { - __u8 id; - __u8 len; - __u8 version; - __u8 flags; -}; - - - /* - * demangle 16 and 32 bits integer in some SMU partitions - * (currently, afaik, this concerns only the FVT partition - * (0x12) - */ -#define SMU_U16_MIX(x) le16_to_cpu(x); -#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) - - -/* This is the definition of the SMU sdb-partition-0x12 table (called - * CPU F/V/T operating points in Darwin). The definition for all those - * SMU tables should be moved to some separate file - */ -#define SMU_SDB_FVT_ID 0x12 - -struct smu_sdbp_fvt { - __u32 sysclk; /* Base SysClk frequency in Hz for - * this operating point. Value need to - * be unmixed with SMU_U32_MIX() - */ - __u8 pad; - __u8 maxtemp; /* Max temp. supported by this - * operating point - */ - - __u16 volts[3]; /* CPU core voltage for the 3 - * PowerTune modes, a mode with - * 0V = not supported. Value need - * to be unmixed with SMU_U16_MIX() - */ -}; - -/* This partition contains voltage & current sensor calibration - * informations - */ -#define SMU_SDB_CPUVCP_ID 0x21 - -struct smu_sdbp_cpuvcp { - __u16 volt_scale; /* u4.12 fixed point */ - __s16 volt_offset; /* s4.12 fixed point */ - __u16 curr_scale; /* u4.12 fixed point */ - __s16 curr_offset; /* s4.12 fixed point */ - __s32 power_quads[3]; /* s4.28 fixed point */ -}; - -/* This partition contains CPU thermal diode calibration - */ -#define SMU_SDB_CPUDIODE_ID 0x18 - -struct smu_sdbp_cpudiode { - __u16 m_value; /* u1.15 fixed point */ - __s16 b_value; /* s10.6 fixed point */ - -}; - -/* This partition contains Slots power calibration - */ -#define SMU_SDB_SLOTSPOW_ID 0x78 - -struct smu_sdbp_slotspow { - __u16 pow_scale; /* u4.12 fixed point */ - __s16 pow_offset; /* s4.12 fixed point */ -}; - -/* This partition contains machine specific version information about - * the sensor/control layout - */ -#define SMU_SDB_SENSORTREE_ID 0x25 - -struct smu_sdbp_sensortree { - __u8 model_id; - __u8 unknown[3]; -}; - -/* This partition contains CPU thermal control PID informations. So far - * only single CPU machines have been seen with an SMU, so we assume this - * carries only informations for those - */ -#define SMU_SDB_CPUPIDDATA_ID 0x17 - -struct smu_sdbp_cpupiddata { - __u8 unknown1; - __u8 target_temp_delta; - __u8 unknown2; - __u8 history_len; - __s16 power_adj; - __u16 max_power; - __s32 gp,gr,gd; -}; - - -/* Other partitions without known structures */ -#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 - -#ifdef __KERNEL__ -/* - * This returns the pointer to an SMU "sdb" partition data or NULL - * if not found. The data format is described below - */ -extern const struct smu_sdbp_header *smu_get_sdb_partition(int id, - unsigned int *size); - -/* Get "sdb" partition data from an SMU satellite */ -extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, - int id, unsigned int *size); - - -#endif /* __KERNEL__ */ - - -/* - * - Userland interface - - */ - -/* - * A given instance of the device can be configured for 2 different - * things at the moment: - * - * - sending SMU commands (default at open() time) - * - receiving SMU events (not yet implemented) - * - * Commands are written with write() of a command block. They can be - * "driver" commands (for example to switch to event reception mode) - * or real SMU commands. They are made of a header followed by command - * data if any. - * - * For SMU commands (not for driver commands), you can then read() back - * a reply. The reader will be blocked or not depending on how the device - * file is opened. poll() isn't implemented yet. The reply will consist - * of a header as well, followed by the reply data if any. You should - * always provide a buffer large enough for the maximum reply data, I - * recommand one page. - * - * It is illegal to send SMU commands through a file descriptor configured - * for events reception - * - */ -struct smu_user_cmd_hdr -{ - __u32 cmdtype; -#define SMU_CMDTYPE_SMU 0 /* SMU command */ -#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ -#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */ - - __u8 cmd; /* SMU command byte */ - __u8 pad[3]; /* padding */ - __u32 data_len; /* Length of data following */ -}; - -struct smu_user_reply_hdr -{ - __u32 status; /* Command status */ - __u32 reply_len; /* Length of data follwing */ -}; - -#endif /* _SMU_H */ diff --git a/include/asm-powerpc/socket.h b/include/asm-powerpc/socket.h deleted file mode 100644 index f5a4e168e498..000000000000 --- a/include/asm-powerpc/socket.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _ASM_POWERPC_SOCKET_H -#define _ASM_POWERPC_SOCKET_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_RCVLOWAT 16 -#define SO_SNDLOWAT 17 -#define SO_RCVTIMEO 18 -#define SO_SNDTIMEO 19 -#define SO_PASSCRED 20 -#define SO_PEERCRED 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* _ASM_POWERPC_SOCKET_H */ diff --git a/include/asm-powerpc/sockios.h b/include/asm-powerpc/sockios.h deleted file mode 100644 index 55cef7675a31..000000000000 --- a/include/asm-powerpc/sockios.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SOCKIOS_H -#define _ASM_POWERPC_SOCKIOS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_POWERPC_SOCKIOS_H */ diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h deleted file mode 100644 index 54a47ea2c3aa..000000000000 --- a/include/asm-powerpc/sparsemem.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_POWERPC_SPARSEMEM_H -#define _ASM_POWERPC_SPARSEMEM_H 1 -#ifdef __KERNEL__ - -#ifdef CONFIG_SPARSEMEM -/* - * SECTION_SIZE_BITS 2^N: how big each section will be - * MAX_PHYSADDR_BITS 2^N: how much physical address space we have - * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space - */ -#define SECTION_SIZE_BITS 24 - -#define MAX_PHYSADDR_BITS 44 -#define MAX_PHYSMEM_BITS 44 - -#endif /* CONFIG_SPARSEMEM */ - -#ifdef CONFIG_MEMORY_HOTPLUG -extern void create_section_mapping(unsigned long start, unsigned long end); -extern int remove_section_mapping(unsigned long start, unsigned long end); -#ifdef CONFIG_NUMA -extern int hot_add_scn_to_nid(unsigned long scn_addr); -#else -static inline int hot_add_scn_to_nid(unsigned long scn_addr) -{ - return 0; -} -#endif /* CONFIG_NUMA */ -#endif /* CONFIG_MEMORY_HOTPLUG */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h deleted file mode 100644 index f56a843f4705..000000000000 --- a/include/asm-powerpc/spinlock.h +++ /dev/null @@ -1,295 +0,0 @@ -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H -#ifdef __KERNEL__ - -/* - * Simple spin lock operations. - * - * Copyright (C) 2001-2004 Paul Mackerras , IBM - * Copyright (C) 2001 Anton Blanchard , IBM - * Copyright (C) 2002 Dave Engebretsen , IBM - * Rework to support virtual processors - * - * Type of int is used as a full 64b word is not necessary. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * (the type definitions are in asm/spinlock_types.h) - */ -#include -#ifdef CONFIG_PPC64 -#include -#include -#include -#endif -#include -#include - -#define __raw_spin_is_locked(x) ((x)->slock != 0) - -#ifdef CONFIG_PPC64 -/* use 0x800000yy when locked, where yy == CPU number */ -#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) -#else -#define LOCK_TOKEN 1 -#endif - -#if defined(CONFIG_PPC64) && defined(CONFIG_SMP) -#define CLEAR_IO_SYNC (get_paca()->io_sync = 0) -#define SYNC_IO do { \ - if (unlikely(get_paca()->io_sync)) { \ - mb(); \ - get_paca()->io_sync = 0; \ - } \ - } while (0) -#else -#define CLEAR_IO_SYNC -#define SYNC_IO -#endif - -/* - * This returns the old value in the lock, so we succeeded - * in getting the lock if the return value is 0. - */ -static inline unsigned long __spin_trylock(raw_spinlock_t *lock) -{ - unsigned long tmp, token; - - token = LOCK_TOKEN; - __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ - cmpwi 0,%0,0\n\ - bne- 2f\n\ - stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (token), "r" (&lock->slock) - : "cr0", "memory"); - - return tmp; -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - CLEAR_IO_SYNC; - return __spin_trylock(lock) == 0; -} - -/* - * On a system with shared processors (that is, where a physical - * processor is multiplexed between several virtual processors), - * there is no point spinning on a lock if the holder of the lock - * isn't currently scheduled on a physical processor. Instead - * we detect this situation and ask the hypervisor to give the - * rest of our timeslice to the lock holder. - * - * So that we can tell which virtual processor is holding a lock, - * we put 0x80000000 | smp_processor_id() in the lock when it is - * held. Conveniently, we have a word in the paca that holds this - * value. - */ - -#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) -/* We only yield to the hypervisor if we are in shared processor mode */ -#define SHARED_PROCESSOR (get_lppaca()->shared_proc) -extern void __spin_yield(raw_spinlock_t *lock); -extern void __rw_yield(raw_rwlock_t *lock); -#else /* SPLPAR || ISERIES */ -#define __spin_yield(x) barrier() -#define __rw_yield(x) barrier() -#define SHARED_PROCESSOR 0 -#endif - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - CLEAR_IO_SYNC; - while (1) { - if (likely(__spin_trylock(lock) == 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __spin_yield(lock); - } while (unlikely(lock->slock != 0)); - HMT_medium(); - } -} - -static inline -void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) -{ - unsigned long flags_dis; - - CLEAR_IO_SYNC; - while (1) { - if (likely(__spin_trylock(lock) == 0)) - break; - local_save_flags(flags_dis); - local_irq_restore(flags); - do { - HMT_low(); - if (SHARED_PROCESSOR) - __spin_yield(lock); - } while (unlikely(lock->slock != 0)); - HMT_medium(); - local_irq_restore(flags_dis); - } -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - SYNC_IO; - __asm__ __volatile__("# __raw_spin_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); - lock->slock = 0; -} - -#ifdef CONFIG_PPC64 -extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); -#else -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) -#endif - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -#define __raw_read_can_lock(rw) ((rw)->lock >= 0) -#define __raw_write_can_lock(rw) (!(rw)->lock) - -#ifdef CONFIG_PPC64 -#define __DO_SIGN_EXTEND "extsw %0,%0\n" -#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ -#else -#define __DO_SIGN_EXTEND -#define WRLOCK_TOKEN (-1) -#endif - -/* - * This returns the old value in the lock + 1, - * so we got a read lock if the return value is > 0. - */ -static inline long __read_trylock(raw_rwlock_t *rw) -{ - long tmp; - - __asm__ __volatile__( -"1: lwarx %0,0,%1\n" - __DO_SIGN_EXTEND -" addic. %0,%0,1\n\ - ble- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (&rw->lock) - : "cr0", "xer", "memory"); - - return tmp; -} - -/* - * This returns the old value in the lock, - * so we got the write lock if the return value is 0. - */ -static inline long __write_trylock(raw_rwlock_t *rw) -{ - long tmp, token; - - token = WRLOCK_TOKEN; - __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ - cmpwi 0,%0,0\n\ - bne- 2f\n" - PPC405_ERR77(0,%1) -" stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) - : "r" (token), "r" (&rw->lock) - : "cr0", "memory"); - - return tmp; -} - -static inline void __raw_read_lock(raw_rwlock_t *rw) -{ - while (1) { - if (likely(__read_trylock(rw) > 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __rw_yield(rw); - } while (unlikely(rw->lock < 0)); - HMT_medium(); - } -} - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - while (1) { - if (likely(__write_trylock(rw) == 0)) - break; - do { - HMT_low(); - if (SHARED_PROCESSOR) - __rw_yield(rw); - } while (unlikely(rw->lock != 0)); - HMT_medium(); - } -} - -static inline int __raw_read_trylock(raw_rwlock_t *rw) -{ - return __read_trylock(rw) > 0; -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - return __write_trylock(rw) == 0; -} - -static inline void __raw_read_unlock(raw_rwlock_t *rw) -{ - long tmp; - - __asm__ __volatile__( - "# read_unlock\n\t" - LWSYNC_ON_SMP -"1: lwarx %0,0,%1\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - : "=&r"(tmp) - : "r"(&rw->lock) - : "cr0", "memory"); -} - -static inline void __raw_write_unlock(raw_rwlock_t *rw) -{ - __asm__ __volatile__("# write_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); - rw->lock = 0; -} - -#define _raw_spin_relax(lock) __spin_yield(lock) -#define _raw_read_relax(lock) __rw_yield(lock) -#define _raw_write_relax(lock) __rw_yield(lock) - -#endif /* __KERNEL__ */ -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-powerpc/spinlock_types.h b/include/asm-powerpc/spinlock_types.h deleted file mode 100644 index 74236c9f05b1..000000000000 --- a/include/asm-powerpc/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H -#define _ASM_POWERPC_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - volatile unsigned int slock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile signed int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h deleted file mode 100644 index 8b2eb044270a..000000000000 --- a/include/asm-powerpc/spu.h +++ /dev/null @@ -1,732 +0,0 @@ -/* - * SPU core / file system interface and HW structures - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * Author: Arnd Bergmann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_H -#define _SPU_H -#ifdef __KERNEL__ - -#include -#include - -#define LS_SIZE (256 * 1024) -#define LS_ADDR_MASK (LS_SIZE - 1) - -#define MFC_PUT_CMD 0x20 -#define MFC_PUTS_CMD 0x28 -#define MFC_PUTR_CMD 0x30 -#define MFC_PUTF_CMD 0x22 -#define MFC_PUTB_CMD 0x21 -#define MFC_PUTFS_CMD 0x2A -#define MFC_PUTBS_CMD 0x29 -#define MFC_PUTRF_CMD 0x32 -#define MFC_PUTRB_CMD 0x31 -#define MFC_PUTL_CMD 0x24 -#define MFC_PUTRL_CMD 0x34 -#define MFC_PUTLF_CMD 0x26 -#define MFC_PUTLB_CMD 0x25 -#define MFC_PUTRLF_CMD 0x36 -#define MFC_PUTRLB_CMD 0x35 - -#define MFC_GET_CMD 0x40 -#define MFC_GETS_CMD 0x48 -#define MFC_GETF_CMD 0x42 -#define MFC_GETB_CMD 0x41 -#define MFC_GETFS_CMD 0x4A -#define MFC_GETBS_CMD 0x49 -#define MFC_GETL_CMD 0x44 -#define MFC_GETLF_CMD 0x46 -#define MFC_GETLB_CMD 0x45 - -#define MFC_SDCRT_CMD 0x80 -#define MFC_SDCRTST_CMD 0x81 -#define MFC_SDCRZ_CMD 0x89 -#define MFC_SDCRS_CMD 0x8D -#define MFC_SDCRF_CMD 0x8F - -#define MFC_GETLLAR_CMD 0xD0 -#define MFC_PUTLLC_CMD 0xB4 -#define MFC_PUTLLUC_CMD 0xB0 -#define MFC_PUTQLLUC_CMD 0xB8 -#define MFC_SNDSIG_CMD 0xA0 -#define MFC_SNDSIGB_CMD 0xA1 -#define MFC_SNDSIGF_CMD 0xA2 -#define MFC_BARRIER_CMD 0xC0 -#define MFC_EIEIO_CMD 0xC8 -#define MFC_SYNC_CMD 0xCC - -#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */ -#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */ -#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT) -#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT) -#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1) -#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1) -#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */ -#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */ - -#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F)) - -/* Events for Channels 0-2 */ -#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001 -#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002 -#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008 -#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010 -#define MFC_DECREMENTER_EVENT 0x00000020 -#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040 -#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080 -#define MFC_SIGNAL_2_EVENT 0x00000100 -#define MFC_SIGNAL_1_EVENT 0x00000200 -#define MFC_LLR_LOST_EVENT 0x00000400 -#define MFC_PRIV_ATTN_EVENT 0x00000800 -#define MFC_MULTI_SRC_EVENT 0x00001000 - -/* Flag indicating progress during context switch. */ -#define SPU_CONTEXT_SWITCH_PENDING 0UL -#define SPU_CONTEXT_FAULT_PENDING 1UL - -struct spu_context; -struct spu_runqueue; -struct spu_lscsa; -struct device_node; - -enum spu_utilization_state { - SPU_UTIL_USER, - SPU_UTIL_SYSTEM, - SPU_UTIL_IOWAIT, - SPU_UTIL_IDLE_LOADED, - SPU_UTIL_MAX -}; - -struct spu { - const char *name; - unsigned long local_store_phys; - u8 *local_store; - unsigned long problem_phys; - struct spu_problem __iomem *problem; - struct spu_priv2 __iomem *priv2; - struct list_head cbe_list; - struct list_head full_list; - enum { SPU_FREE, SPU_USED } alloc_state; - int number; - unsigned int irqs[3]; - u32 node; - u64 flags; - u64 class_0_pending; - u64 class_0_dar; - u64 class_1_dar; - u64 class_1_dsisr; - size_t ls_size; - unsigned int slb_replace; - struct mm_struct *mm; - struct spu_context *ctx; - struct spu_runqueue *rq; - unsigned long long timestamp; - pid_t pid; - pid_t tgid; - spinlock_t register_lock; - - void (* wbox_callback)(struct spu *spu); - void (* ibox_callback)(struct spu *spu); - void (* stop_callback)(struct spu *spu, int irq); - void (* mfc_callback)(struct spu *spu); - - char irq_c0[8]; - char irq_c1[8]; - char irq_c2[8]; - - u64 spe_id; - - void* pdata; /* platform private data */ - - /* of based platforms only */ - struct device_node *devnode; - - /* native only */ - struct spu_priv1 __iomem *priv1; - - /* beat only */ - u64 shadow_int_mask_RW[3]; - - struct sys_device sysdev; - - int has_mem_affinity; - struct list_head aff_list; - - struct { - /* protected by interrupt reentrancy */ - enum spu_utilization_state util_state; - unsigned long long tstamp; - unsigned long long times[SPU_UTIL_MAX]; - unsigned long long vol_ctx_switch; - unsigned long long invol_ctx_switch; - unsigned long long min_flt; - unsigned long long maj_flt; - unsigned long long hash_flt; - unsigned long long slb_flt; - unsigned long long class2_intr; - unsigned long long libassist; - } stats; -}; - -struct cbe_spu_info { - struct mutex list_mutex; - struct list_head spus; - int n_spus; - int nr_active; - atomic_t busy_spus; - atomic_t reserved_spus; -}; - -extern struct cbe_spu_info cbe_spu_info[]; - -void spu_init_channels(struct spu *spu); -void spu_irq_setaffinity(struct spu *spu, int cpu); - -void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, - void *code, int code_size); - -#ifdef CONFIG_KEXEC -void crash_register_spus(struct list_head *list); -#else -static inline void crash_register_spus(struct list_head *list) -{ -} -#endif - -extern void spu_invalidate_slbs(struct spu *spu); -extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); -int spu_64k_pages_available(void); - -/* Calls from the memory management to the SPU */ -struct mm_struct; -extern void spu_flush_all_slbs(struct mm_struct *mm); - -/* This interface allows a profiler (e.g., OProfile) to store a ref - * to spu context information that it creates. This caching technique - * avoids the need to recreate this information after a save/restore operation. - * - * Assumes the caller has already incremented the ref count to - * profile_info; then spu_context_destroy must call kref_put - * on prof_info_kref. - */ -void spu_set_profile_private_kref(struct spu_context *ctx, - struct kref *prof_info_kref, - void ( * prof_info_release) (struct kref *kref)); - -void *spu_get_profile_private_kref(struct spu_context *ctx); - -/* system callbacks from the SPU */ -struct spu_syscall_block { - u64 nr_ret; - u64 parm[6]; -}; -extern long spu_sys_callback(struct spu_syscall_block *s); - -/* syscalls implemented in spufs */ -struct file; -struct spufs_calls { - long (*create_thread)(const char __user *name, - unsigned int flags, mode_t mode, - struct file *neighbor); - long (*spu_run)(struct file *filp, __u32 __user *unpc, - __u32 __user *ustatus); - int (*coredump_extra_notes_size)(void); - int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset); - void (*notify_spus_active)(void); - struct module *owner; -}; - -/* return status from spu_run, same as in libspe */ -#define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ -#define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ -#define SPE_EVENT_SPE_DATA_SEGMENT 0x0020 /*A DMA segmentation error */ -#define SPE_EVENT_SPE_DATA_STORAGE 0x0040 /*A DMA storage error */ -#define SPE_EVENT_INVALID_DMA 0x0800 /* Invalid MFC DMA */ - -/* - * Flags for sys_spu_create. - */ -#define SPU_CREATE_EVENTS_ENABLED 0x0001 -#define SPU_CREATE_GANG 0x0002 -#define SPU_CREATE_NOSCHED 0x0004 -#define SPU_CREATE_ISOLATE 0x0008 -#define SPU_CREATE_AFFINITY_SPU 0x0010 -#define SPU_CREATE_AFFINITY_MEM 0x0020 - -#define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ - - -int register_spu_syscalls(struct spufs_calls *calls); -void unregister_spu_syscalls(struct spufs_calls *calls); - -int spu_add_sysdev_attr(struct sysdev_attribute *attr); -void spu_remove_sysdev_attr(struct sysdev_attribute *attr); - -int spu_add_sysdev_attr_group(struct attribute_group *attrs); -void spu_remove_sysdev_attr_group(struct attribute_group *attrs); - -int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, - unsigned long dsisr, unsigned *flt); - -/* - * Notifier blocks: - * - * oprofile can get notified when a context switch is performed - * on an spe. The notifer function that gets called is passed - * a pointer to the SPU structure as well as the object-id that - * identifies the binary running on that SPU now. - * - * For a context save, the object-id that is passed is zero, - * identifying that the kernel will run from that moment on. - * - * For a context restore, the object-id is the value written - * to object-id spufs file from user space and the notifer - * function can assume that spu->ctx is valid. - */ -struct notifier_block; -int spu_switch_event_register(struct notifier_block * n); -int spu_switch_event_unregister(struct notifier_block * n); - -extern void notify_spus_active(void); -extern void do_notify_spus_active(void); - -/* - * This defines the Local Store, Problem Area and Privilege Area of an SPU. - */ - -union mfc_tag_size_class_cmd { - struct { - u16 mfc_size; - u16 mfc_tag; - u8 pad; - u8 mfc_rclassid; - u16 mfc_cmd; - } u; - struct { - u32 mfc_size_tag32; - u32 mfc_class_cmd32; - } by32; - u64 all64; -}; - -struct mfc_cq_sr { - u64 mfc_cq_data0_RW; - u64 mfc_cq_data1_RW; - u64 mfc_cq_data2_RW; - u64 mfc_cq_data3_RW; -}; - -struct spu_problem { -#define MS_SYNC_PENDING 1L - u64 spc_mssync_RW; /* 0x0000 */ - u8 pad_0x0008_0x3000[0x3000 - 0x0008]; - - /* DMA Area */ - u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */ - u32 mfc_lsa_W; /* 0x3004 */ - u64 mfc_ea_W; /* 0x3008 */ - union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */ - u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */ - u32 dma_qstatus_R; /* 0x3104 */ - u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */ - u32 dma_querytype_RW; /* 0x3204 */ - u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */ - u32 dma_querymask_RW; /* 0x321c */ - u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */ - u32 dma_tagstatus_R; /* 0x322c */ -#define DMA_TAGSTATUS_INTR_ANY 1u -#define DMA_TAGSTATUS_INTR_ALL 2u - u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */ - - /* SPU Control Area */ - u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */ - u32 pu_mb_R; /* 0x4004 */ - u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */ - u32 spu_mb_W; /* 0x400c */ - u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */ - u32 mb_stat_R; /* 0x4014 */ - u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */ - u32 spu_runcntl_RW; /* 0x401c */ -#define SPU_RUNCNTL_STOP 0L -#define SPU_RUNCNTL_RUNNABLE 1L -#define SPU_RUNCNTL_ISOLATE 2L - u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ - u32 spu_status_R; /* 0x4024 */ -#define SPU_STOP_STATUS_SHIFT 16 -#define SPU_STATUS_STOPPED 0x0 -#define SPU_STATUS_RUNNING 0x1 -#define SPU_STATUS_STOPPED_BY_STOP 0x2 -#define SPU_STATUS_STOPPED_BY_HALT 0x4 -#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8 -#define SPU_STATUS_SINGLE_STEP 0x10 -#define SPU_STATUS_INVALID_INSTR 0x20 -#define SPU_STATUS_INVALID_CH 0x40 -#define SPU_STATUS_ISOLATED_STATE 0x80 -#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 -#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 - u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ - u32 spu_spe_R; /* 0x402c */ - u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ - u32 spu_npc_RW; /* 0x4034 */ - u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */ - - /* Signal Notification Area */ - u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */ - u32 signal_notify1; /* 0x1400c */ - u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */ - u32 signal_notify2; /* 0x1c00c */ -} __attribute__ ((aligned(0x20000))); - -/* SPU Privilege 2 State Area */ -struct spu_priv2 { - /* MFC Registers */ - u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */ - - /* SLB Management Registers */ - u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */ - u64 slb_index_W; /* 0x1108 */ -#define SLB_INDEX_MASK 0x7L - u64 slb_esid_RW; /* 0x1110 */ - u64 slb_vsid_RW; /* 0x1118 */ -#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11) -#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11) -#define SLB_VSID_PROBLEM_STATE (0x1ull << 10) -#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10) -#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9) -#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9) -#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9) -#define SLB_VSID_4K_PAGE (0x0 << 8) -#define SLB_VSID_LARGE_PAGE (0x1ull << 8) -#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8) -#define SLB_VSID_CLASS_MASK (0x1ull << 7) -#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6) - u64 slb_invalidate_entry_W; /* 0x1120 */ - u64 slb_invalidate_all_W; /* 0x1128 */ - u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */ - - /* Context Save / Restore Area */ - struct mfc_cq_sr spuq[16]; /* 0x2000 */ - struct mfc_cq_sr puq[8]; /* 0x2200 */ - u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */ - - /* MFC Control */ - u64 mfc_control_RW; /* 0x3000 */ -#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0) -#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0) -#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0) -#define MFC_CNTL_SUSPEND_MASK (1ull << 4) -#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8) -#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8) -#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8) -#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8) -#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14) -#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14) -#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15) -#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24) -#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24) -#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24) -#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32) -#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32) -#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32) -#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33) -#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33) -#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33) -#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35) -#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40) -#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40) - u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */ - - /* Interrupt Mailbox */ - u64 puint_mb_R; /* 0x4000 */ - u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */ - - /* SPU Control */ - u64 spu_privcntl_RW; /* 0x4040 */ -#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0) -#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0) -#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0) -#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1) -#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1) -#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1) -#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2) -#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2) - u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */ - u64 spu_lslr_RW; /* 0x4058 */ - u64 spu_chnlcntptr_RW; /* 0x4060 */ - u64 spu_chnlcnt_RW; /* 0x4068 */ - u64 spu_chnldata_RW; /* 0x4070 */ - u64 spu_cfg_RW; /* 0x4078 */ - u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */ - - /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */ - u64 spu_pm_trace_tag_status_RW; /* 0x5000 */ - u64 spu_tag_status_query_RW; /* 0x5008 */ -#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32) -#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull) - u64 spu_cmd_buf1_RW; /* 0x5010 */ -#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32) -#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull) - u64 spu_cmd_buf2_RW; /* 0x5018 */ -#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32) -#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16) -#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full) - u64 spu_atomic_status_RW; /* 0x5020 */ -} __attribute__ ((aligned(0x20000))); - -/* SPU Privilege 1 State Area */ -struct spu_priv1 { - /* Control and Configuration Area */ - u64 mfc_sr1_RW; /* 0x000 */ -#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull -#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull -#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull -#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull -#define MFC_STATE1_RELOCATE_MASK 0x10ull -#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull -#define MFC_STATE1_TABLE_SEARCH_MASK 0x40ull - u64 mfc_lpid_RW; /* 0x008 */ - u64 spu_idr_RW; /* 0x010 */ - u64 mfc_vr_RO; /* 0x018 */ -#define MFC_VERSION_BITS (0xffff << 16) -#define MFC_REVISION_BITS (0xffff) -#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16) -#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS) - u64 spu_vr_RO; /* 0x020 */ -#define SPU_VERSION_BITS (0xffff << 16) -#define SPU_REVISION_BITS (0xffff) -#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16 -#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS) - u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */ - - /* Interrupt Area */ - u64 int_mask_RW[3]; /* 0x100 */ -#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L -#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L -#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L -#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L -#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L -#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L -#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L -#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L -#define CLASS2_ENABLE_MAILBOX_INTR 0x1L -#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L -#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L -#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L -#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L - u8 pad_0x118_0x140[0x28]; /* 0x118 */ - u64 int_stat_RW[3]; /* 0x140 */ -#define CLASS0_DMA_ALIGNMENT_INTR 0x1L -#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L -#define CLASS0_SPU_ERROR_INTR 0x4L -#define CLASS0_INTR_MASK 0x7L -#define CLASS1_SEGMENT_FAULT_INTR 0x1L -#define CLASS1_STORAGE_FAULT_INTR 0x2L -#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L -#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L -#define CLASS1_INTR_MASK 0xfL -#define CLASS2_MAILBOX_INTR 0x1L -#define CLASS2_SPU_STOP_INTR 0x2L -#define CLASS2_SPU_HALT_INTR 0x4L -#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L -#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L -#define CLASS2_INTR_MASK 0x1fL - u8 pad_0x158_0x180[0x28]; /* 0x158 */ - u64 int_route_RW; /* 0x180 */ - - /* Interrupt Routing */ - u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */ - - /* Atomic Unit Control Area */ - u64 mfc_atomic_flush_RW; /* 0x200 */ -#define mfc_atomic_flush_enable 0x1L - u8 pad_0x208_0x280[0x78]; /* 0x208 */ - u64 resource_allocation_groupID_RW; /* 0x280 */ - u64 resource_allocation_enable_RW; /* 0x288 */ - u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */ - - /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */ - - u64 smf_sbi_signal_sel; /* 0x3c8 */ -#define smf_sbi_mask_lsb 56 -#define smf_sbi_shift (63 - smf_sbi_mask_lsb) -#define smf_sbi_mask (0x301LL << smf_sbi_shift) -#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift) -#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift) -#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift) -#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift) - u64 smf_ato_signal_sel; /* 0x3d0 */ -#define smf_ato_mask_lsb 35 -#define smf_ato_shift (63 - smf_ato_mask_lsb) -#define smf_ato_mask (0x3LL << smf_ato_shift) -#define smf_ato_bus0_bits (0x2LL << smf_ato_shift) -#define smf_ato_bus2_bits (0x1LL << smf_ato_shift) - u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */ - - /* TLB Management Registers */ - u64 mfc_sdr_RW; /* 0x400 */ - u8 pad_0x408_0x500[0xf8]; /* 0x408 */ - u64 tlb_index_hint_RO; /* 0x500 */ - u64 tlb_index_W; /* 0x508 */ - u64 tlb_vpn_RW; /* 0x510 */ - u64 tlb_rpn_RW; /* 0x518 */ - u8 pad_0x520_0x540[0x20]; /* 0x520 */ - u64 tlb_invalidate_entry_W; /* 0x540 */ - u64 tlb_invalidate_all_W; /* 0x548 */ - u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */ - - /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */ - u64 smm_hid; /* 0x580 */ -#define PAGE_SIZE_MASK 0xf000000000000000ull -#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull - u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */ - - /* MFC Status/Control Area */ - u64 mfc_accr_RW; /* 0x600 */ -#define MFC_ACCR_EA_ACCESS_GET (1 << 0) -#define MFC_ACCR_EA_ACCESS_PUT (1 << 1) -#define MFC_ACCR_LS_ACCESS_GET (1 << 3) -#define MFC_ACCR_LS_ACCESS_PUT (1 << 4) - u8 pad_0x608_0x610[0x8]; /* 0x608 */ - u64 mfc_dsisr_RW; /* 0x610 */ -#define MFC_DSISR_PTE_NOT_FOUND (1 << 30) -#define MFC_DSISR_ACCESS_DENIED (1 << 27) -#define MFC_DSISR_ATOMIC (1 << 26) -#define MFC_DSISR_ACCESS_PUT (1 << 25) -#define MFC_DSISR_ADDR_MATCH (1 << 22) -#define MFC_DSISR_LS (1 << 17) -#define MFC_DSISR_L (1 << 16) -#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0) - u8 pad_0x618_0x620[0x8]; /* 0x618 */ - u64 mfc_dar_RW; /* 0x620 */ - u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */ - - /* Replacement Management Table (RMT) Area */ - u64 rmt_index_RW; /* 0x700 */ - u8 pad_0x708_0x710[0x8]; /* 0x708 */ - u64 rmt_data1_RW; /* 0x710 */ - u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */ - - /* Control/Configuration Registers */ - u64 mfc_dsir_R; /* 0x800 */ -#define MFC_DSIR_Q (1 << 31) -#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q - u64 mfc_lsacr_RW; /* 0x808 */ -#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32) -#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32) - u64 mfc_lscrr_R; /* 0x810 */ -#define MFC_LSCRR_Q (1 << 31) -#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q -#define MFC_LSCRR_QI_SHIFT 32 -#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT) - u8 pad_0x818_0x820[0x8]; /* 0x818 */ - u64 mfc_tclass_id_RW; /* 0x820 */ -#define MFC_TCLASS_ID_ENABLE (1L << 0L) -#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L) -#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L) -#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L) -#define MFC_TCLASS_QUOTA_2_SHIFT 8L -#define MFC_TCLASS_QUOTA_1_SHIFT 16L -#define MFC_TCLASS_QUOTA_0_SHIFT 24L -#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT) -#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT) -#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT) - u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */ - - /* Real Mode Support Registers */ - u64 mfc_rm_boundary; /* 0x900 */ - u8 pad_0x908_0x938[0x30]; /* 0x908 */ - u64 smf_dma_signal_sel; /* 0x938 */ -#define mfc_dma1_mask_lsb 41 -#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb) -#define mfc_dma1_mask (0x3LL << mfc_dma1_shift) -#define mfc_dma1_bits (0x1LL << mfc_dma1_shift) -#define mfc_dma2_mask_lsb 43 -#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb) -#define mfc_dma2_mask (0x3LL << mfc_dma2_shift) -#define mfc_dma2_bits (0x1LL << mfc_dma2_shift) - u8 pad_0x940_0xa38[0xf8]; /* 0x940 */ - u64 smm_signal_sel; /* 0xa38 */ -#define smm_sig_mask_lsb 12 -#define smm_sig_shift (63 - smm_sig_mask_lsb) -#define smm_sig_mask (0x3LL << smm_sig_shift) -#define smm_sig_bus0_bits (0x2LL << smm_sig_shift) -#define smm_sig_bus2_bits (0x1LL << smm_sig_shift) - u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */ - - /* DMA Command Error Area */ - u64 mfc_cer_R; /* 0xc00 */ -#define MFC_CER_Q (1 << 31) -#define MFC_CER_SPU_QUEUE MFC_CER_Q - u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */ - - /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */ - /* DMA Command Error Area */ - u64 spu_ecc_cntl_RW; /* 0x1000 */ -#define SPU_ECC_CNTL_E (1ull << 0ull) -#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E -#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L) -#define SPU_ECC_CNTL_S (1ull << 1ull) -#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S -#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L) -#define SPU_ECC_CNTL_B (1ull << 2ull) -#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B -#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L) -#define SPU_ECC_CNTL_I_SHIFT 3ull -#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L) -#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT) -#define SPU_ECC_CNTL_D (1ull << 5ull) -#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D -#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L) - u64 spu_ecc_stat_RW; /* 0x1008 */ -#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul) -#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul) -#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul) -#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul) -#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul) -#define SPU_ECC_DATA_ERROR (1ull << 5ul) -#define SPU_ECC_DMA_ERROR (1ull << 6ul) -#define SPU_ECC_STATUS_CNT_MASK (256ull << 8) - u64 spu_ecc_addr_RW; /* 0x1010 */ - u64 spu_err_mask_RW; /* 0x1018 */ -#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul) -#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul) - u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */ - - /* SPU Debug-Trace Bus (DTB) Selection Registers */ - u64 spu_trig0_sel; /* 0x1028 */ - u64 spu_trig1_sel; /* 0x1030 */ - u64 spu_trig2_sel; /* 0x1038 */ - u64 spu_trig3_sel; /* 0x1040 */ - u64 spu_trace_sel; /* 0x1048 */ -#define spu_trace_sel_mask 0x1f1fLL -#define spu_trace_sel_bus0_bits 0x1000LL -#define spu_trace_sel_bus2_bits 0x0010LL - u64 spu_event0_sel; /* 0x1050 */ - u64 spu_event1_sel; /* 0x1058 */ - u64 spu_event2_sel; /* 0x1060 */ - u64 spu_event3_sel; /* 0x1068 */ - u64 spu_trace_cntl; /* 0x1070 */ -} __attribute__ ((aligned(0x2000))); - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h deleted file mode 100644 index a40fd491250c..000000000000 --- a/include/asm-powerpc/spu_csa.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * spu_csa.h: Definitions for SPU context save area (CSA). - * - * (C) Copyright IBM 2005 - * - * Author: Mark Nutter - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_CSA_H_ -#define _SPU_CSA_H_ -#ifdef __KERNEL__ - -/* - * Total number of 128-bit registers. - */ -#define NR_SPU_GPRS 128 -#define NR_SPU_SPRS 9 -#define NR_SPU_REGS_PAD 7 -#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */ -#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16 - -#define SPU_SAVE_COMPLETE 0x3FFB -#define SPU_RESTORE_COMPLETE 0x3FFC - -/* - * Definitions for various 'stopped' status conditions, - * to be recreated during context restore. - */ -#define SPU_STOPPED_STATUS_P 1 -#define SPU_STOPPED_STATUS_I 2 -#define SPU_STOPPED_STATUS_H 3 -#define SPU_STOPPED_STATUS_S 4 -#define SPU_STOPPED_STATUS_S_I 5 -#define SPU_STOPPED_STATUS_S_P 6 -#define SPU_STOPPED_STATUS_P_H 7 -#define SPU_STOPPED_STATUS_P_I 8 -#define SPU_STOPPED_STATUS_R 9 - -/* - * Definitions for software decrementer status flag. - */ -#define SPU_DECR_STATUS_RUNNING 0x1 -#define SPU_DECR_STATUS_WRAPPED 0x2 - -#ifndef __ASSEMBLY__ -/** - * spu_reg128 - generic 128-bit register definition. - */ -struct spu_reg128 { - u32 slot[4]; -}; - -/** - * struct spu_lscsa - Local Store Context Save Area. - * @gprs: Array of saved registers. - * @fpcr: Saved floating point status control register. - * @decr: Saved decrementer value. - * @decr_status: Indicates software decrementer status flags. - * @ppu_mb: Saved PPU mailbox data. - * @ppuint_mb: Saved PPU interrupting mailbox data. - * @tag_mask: Saved tag group mask. - * @event_mask: Saved event mask. - * @srr0: Saved SRR0. - * @stopped_status: Conditions to be recreated by restore. - * @ls: Saved contents of Local Storage Area. - * - * The LSCSA represents state that is primarily saved and - * restored by SPU-side code. - */ -struct spu_lscsa { - struct spu_reg128 gprs[128]; - struct spu_reg128 fpcr; - struct spu_reg128 decr; - struct spu_reg128 decr_status; - struct spu_reg128 ppu_mb; - struct spu_reg128 ppuint_mb; - struct spu_reg128 tag_mask; - struct spu_reg128 event_mask; - struct spu_reg128 srr0; - struct spu_reg128 stopped_status; - - /* - * 'ls' must be page-aligned on all configurations. - * Since we don't want to rely on having the spu-gcc - * installed to build the kernel and this structure - * is used in the SPU-side code, make it 64k-page - * aligned for now. - */ - unsigned char ls[LS_SIZE] __attribute__((aligned(65536))); -}; - -#ifndef __SPU__ -/* - * struct spu_problem_collapsed - condensed problem state area, w/o pads. - */ -struct spu_problem_collapsed { - u64 spc_mssync_RW; - u32 mfc_lsa_W; - u32 unused_pad0; - u64 mfc_ea_W; - union mfc_tag_size_class_cmd mfc_union_W; - u32 dma_qstatus_R; - u32 dma_querytype_RW; - u32 dma_querymask_RW; - u32 dma_tagstatus_R; - u32 pu_mb_R; - u32 spu_mb_W; - u32 mb_stat_R; - u32 spu_runcntl_RW; - u32 spu_status_R; - u32 spu_spc_R; - u32 spu_npc_RW; - u32 signal_notify1; - u32 signal_notify2; - u32 unused_pad1; -}; - -/* - * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads. - */ -struct spu_priv1_collapsed { - u64 mfc_sr1_RW; - u64 mfc_lpid_RW; - u64 spu_idr_RW; - u64 mfc_vr_RO; - u64 spu_vr_RO; - u64 int_mask_class0_RW; - u64 int_mask_class1_RW; - u64 int_mask_class2_RW; - u64 int_stat_class0_RW; - u64 int_stat_class1_RW; - u64 int_stat_class2_RW; - u64 int_route_RW; - u64 mfc_atomic_flush_RW; - u64 resource_allocation_groupID_RW; - u64 resource_allocation_enable_RW; - u64 mfc_fir_R; - u64 mfc_fir_status_or_W; - u64 mfc_fir_status_and_W; - u64 mfc_fir_mask_R; - u64 mfc_fir_mask_or_W; - u64 mfc_fir_mask_and_W; - u64 mfc_fir_chkstp_enable_RW; - u64 smf_sbi_signal_sel; - u64 smf_ato_signal_sel; - u64 tlb_index_hint_RO; - u64 tlb_index_W; - u64 tlb_vpn_RW; - u64 tlb_rpn_RW; - u64 tlb_invalidate_entry_W; - u64 tlb_invalidate_all_W; - u64 smm_hid; - u64 mfc_accr_RW; - u64 mfc_dsisr_RW; - u64 mfc_dar_RW; - u64 rmt_index_RW; - u64 rmt_data1_RW; - u64 mfc_dsir_R; - u64 mfc_lsacr_RW; - u64 mfc_lscrr_R; - u64 mfc_tclass_id_RW; - u64 mfc_rm_boundary; - u64 smf_dma_signal_sel; - u64 smm_signal_sel; - u64 mfc_cer_R; - u64 pu_ecc_cntl_RW; - u64 pu_ecc_stat_RW; - u64 spu_ecc_addr_RW; - u64 spu_err_mask_RW; - u64 spu_trig0_sel; - u64 spu_trig1_sel; - u64 spu_trig2_sel; - u64 spu_trig3_sel; - u64 spu_trace_sel; - u64 spu_event0_sel; - u64 spu_event1_sel; - u64 spu_event2_sel; - u64 spu_event3_sel; - u64 spu_trace_cntl; -}; - -/* - * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads. - */ -struct spu_priv2_collapsed { - u64 slb_index_W; - u64 slb_esid_RW; - u64 slb_vsid_RW; - u64 slb_invalidate_entry_W; - u64 slb_invalidate_all_W; - struct mfc_cq_sr spuq[16]; - struct mfc_cq_sr puq[8]; - u64 mfc_control_RW; - u64 puint_mb_R; - u64 spu_privcntl_RW; - u64 spu_lslr_RW; - u64 spu_chnlcntptr_RW; - u64 spu_chnlcnt_RW; - u64 spu_chnldata_RW; - u64 spu_cfg_RW; - u64 spu_tag_status_query_RW; - u64 spu_cmd_buf1_RW; - u64 spu_cmd_buf2_RW; - u64 spu_atomic_status_RW; -}; - -/** - * struct spu_state - * @lscsa: Local Store Context Save Area. - * @prob: Collapsed Problem State Area, w/o pads. - * @priv1: Collapsed Privileged 1 Area, w/o pads. - * @priv2: Collapsed Privileged 2 Area, w/o pads. - * @spu_chnlcnt_RW: Array of saved channel counts. - * @spu_chnldata_RW: Array of saved channel data. - * @suspend_time: Time stamp when decrementer disabled. - * - * Structure representing the whole of the SPU - * context save area (CSA). This struct contains - * all of the state necessary to suspend and then - * later optionally resume execution of an SPU - * context. - * - * The @lscsa region is by far the largest, and is - * allocated separately so that it may either be - * pinned or mapped to/from application memory, as - * appropriate for the OS environment. - */ -struct spu_state { - struct spu_lscsa *lscsa; -#ifdef CONFIG_SPU_FS_64K_LS - int use_big_pages; - /* One struct page per 64k page */ -#define SPU_LSCSA_NUM_BIG_PAGES (sizeof(struct spu_lscsa) / 0x10000) - struct page *lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES]; -#endif - struct spu_problem_collapsed prob; - struct spu_priv1_collapsed priv1; - struct spu_priv2_collapsed priv2; - u64 spu_chnlcnt_RW[32]; - u64 spu_chnldata_RW[32]; - u32 spu_mailbox_data[4]; - u32 pu_mailbox_data[1]; - u64 class_0_dar, class_0_pending; - u64 class_1_dar, class_1_dsisr; - unsigned long suspend_time; - spinlock_t register_lock; -}; - -#endif /* !__SPU__ */ -#endif /* __KERNEL__ */ -#endif /* !__ASSEMBLY__ */ -#endif /* _SPU_CSA_H_ */ diff --git a/include/asm-powerpc/spu_info.h b/include/asm-powerpc/spu_info.h deleted file mode 100644 index 3545efbf9891..000000000000 --- a/include/asm-powerpc/spu_info.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * SPU info structures - * - * (C) Copyright 2006 IBM Corp. - * - * Author: Dwayne Grant McConnell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPU_INFO_H -#define _SPU_INFO_H - -#ifdef __KERNEL__ -#include -#include -#else -struct mfc_cq_sr { - __u64 mfc_cq_data0_RW; - __u64 mfc_cq_data1_RW; - __u64 mfc_cq_data2_RW; - __u64 mfc_cq_data3_RW; -}; -#endif /* __KERNEL__ */ - -struct spu_dma_info { - __u64 dma_info_type; - __u64 dma_info_mask; - __u64 dma_info_status; - __u64 dma_info_stall_and_notify; - __u64 dma_info_atomic_command_status; - struct mfc_cq_sr dma_info_command_data[16]; -}; - -struct spu_proxydma_info { - __u64 proxydma_info_type; - __u64 proxydma_info_mask; - __u64 proxydma_info_status; - struct mfc_cq_sr proxydma_info_command_data[8]; -}; - -#endif diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h deleted file mode 100644 index 25020a34ce7f..000000000000 --- a/include/asm-powerpc/spu_priv1.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Defines an spu hypervisor abstraction layer. - * - * Copyright 2006 Sony Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(_SPU_PRIV1_H) -#define _SPU_PRIV1_H -#if defined(__KERNEL__) - -#include - -struct spu; -struct spu_context; - -/* access to priv1 registers */ - -struct spu_priv1_ops { - void (*int_mask_and) (struct spu *spu, int class, u64 mask); - void (*int_mask_or) (struct spu *spu, int class, u64 mask); - void (*int_mask_set) (struct spu *spu, int class, u64 mask); - u64 (*int_mask_get) (struct spu *spu, int class); - void (*int_stat_clear) (struct spu *spu, int class, u64 stat); - u64 (*int_stat_get) (struct spu *spu, int class); - void (*cpu_affinity_set) (struct spu *spu, int cpu); - u64 (*mfc_dar_get) (struct spu *spu); - u64 (*mfc_dsisr_get) (struct spu *spu); - void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); - void (*mfc_sdr_setup) (struct spu *spu); - void (*mfc_sr1_set) (struct spu *spu, u64 sr1); - u64 (*mfc_sr1_get) (struct spu *spu); - void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); - u64 (*mfc_tclass_id_get) (struct spu *spu); - void (*tlb_invalidate) (struct spu *spu); - void (*resource_allocation_groupID_set) (struct spu *spu, u64 id); - u64 (*resource_allocation_groupID_get) (struct spu *spu); - void (*resource_allocation_enable_set) (struct spu *spu, u64 enable); - u64 (*resource_allocation_enable_get) (struct spu *spu); -}; - -extern const struct spu_priv1_ops* spu_priv1_ops; - -static inline void -spu_int_mask_and (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_and(spu, class, mask); -} - -static inline void -spu_int_mask_or (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_or(spu, class, mask); -} - -static inline void -spu_int_mask_set (struct spu *spu, int class, u64 mask) -{ - spu_priv1_ops->int_mask_set(spu, class, mask); -} - -static inline u64 -spu_int_mask_get (struct spu *spu, int class) -{ - return spu_priv1_ops->int_mask_get(spu, class); -} - -static inline void -spu_int_stat_clear (struct spu *spu, int class, u64 stat) -{ - spu_priv1_ops->int_stat_clear(spu, class, stat); -} - -static inline u64 -spu_int_stat_get (struct spu *spu, int class) -{ - return spu_priv1_ops->int_stat_get (spu, class); -} - -static inline void -spu_cpu_affinity_set (struct spu *spu, int cpu) -{ - spu_priv1_ops->cpu_affinity_set(spu, cpu); -} - -static inline u64 -spu_mfc_dar_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_dar_get(spu); -} - -static inline u64 -spu_mfc_dsisr_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_dsisr_get(spu); -} - -static inline void -spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) -{ - spu_priv1_ops->mfc_dsisr_set(spu, dsisr); -} - -static inline void -spu_mfc_sdr_setup (struct spu *spu) -{ - spu_priv1_ops->mfc_sdr_setup(spu); -} - -static inline void -spu_mfc_sr1_set (struct spu *spu, u64 sr1) -{ - spu_priv1_ops->mfc_sr1_set(spu, sr1); -} - -static inline u64 -spu_mfc_sr1_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_sr1_get(spu); -} - -static inline void -spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id) -{ - spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id); -} - -static inline u64 -spu_mfc_tclass_id_get (struct spu *spu) -{ - return spu_priv1_ops->mfc_tclass_id_get(spu); -} - -static inline void -spu_tlb_invalidate (struct spu *spu) -{ - spu_priv1_ops->tlb_invalidate(spu); -} - -static inline void -spu_resource_allocation_groupID_set (struct spu *spu, u64 id) -{ - spu_priv1_ops->resource_allocation_groupID_set(spu, id); -} - -static inline u64 -spu_resource_allocation_groupID_get (struct spu *spu) -{ - return spu_priv1_ops->resource_allocation_groupID_get(spu); -} - -static inline void -spu_resource_allocation_enable_set (struct spu *spu, u64 enable) -{ - spu_priv1_ops->resource_allocation_enable_set(spu, enable); -} - -static inline u64 -spu_resource_allocation_enable_get (struct spu *spu) -{ - return spu_priv1_ops->resource_allocation_enable_get(spu); -} - -/* spu management abstraction */ - -struct spu_management_ops { - int (*enumerate_spus)(int (*fn)(void *data)); - int (*create_spu)(struct spu *spu, void *data); - int (*destroy_spu)(struct spu *spu); - void (*enable_spu)(struct spu_context *ctx); - void (*disable_spu)(struct spu_context *ctx); - int (*init_affinity)(void); -}; - -extern const struct spu_management_ops* spu_management_ops; - -static inline int -spu_enumerate_spus (int (*fn)(void *data)) -{ - return spu_management_ops->enumerate_spus(fn); -} - -static inline int -spu_create_spu (struct spu *spu, void *data) -{ - return spu_management_ops->create_spu(spu, data); -} - -static inline int -spu_destroy_spu (struct spu *spu) -{ - return spu_management_ops->destroy_spu(spu); -} - -static inline int -spu_init_affinity (void) -{ - return spu_management_ops->init_affinity(); -} - -static inline void -spu_enable_spu (struct spu_context *ctx) -{ - spu_management_ops->enable_spu(ctx); -} - -static inline void -spu_disable_spu (struct spu_context *ctx) -{ - spu_management_ops->disable_spu(ctx); -} - -/* - * The declarations folowing are put here for convenience - * and only intended to be used by the platform setup code. - */ - -extern const struct spu_priv1_ops spu_priv1_mmio_ops; -extern const struct spu_priv1_ops spu_priv1_beat_ops; - -extern const struct spu_management_ops spu_management_of_ops; - -#endif /* __KERNEL__ */ -#endif diff --git a/include/asm-powerpc/sstep.h b/include/asm-powerpc/sstep.h deleted file mode 100644 index f593b0f9b627..000000000000 --- a/include/asm-powerpc/sstep.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2004 Paul Mackerras , IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -struct pt_regs; - -/* - * We don't allow single-stepping an mtmsrd that would clear - * MSR_RI, since that would make the exception unrecoverable. - * Since we need to single-step to proceed from a breakpoint, - * we don't allow putting a breakpoint on an mtmsrd instruction. - * Similarly we don't allow breakpoints on rfid instructions. - * These macros tell us if an instruction is a mtmsrd or rfid. - * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) - * and an mtmsrd (64-bit). - */ -#define IS_MTMSRD(instr) (((instr) & 0xfc0007be) == 0x7c000124) -#define IS_RFID(instr) (((instr) & 0xfc0007fe) == 0x4c000024) -#define IS_RFI(instr) (((instr) & 0xfc0007fe) == 0x4c000064) - -/* Emulate instructions that cause a transfer of control. */ -extern int emulate_step(struct pt_regs *regs, unsigned int instr); diff --git a/include/asm-powerpc/stat.h b/include/asm-powerpc/stat.h deleted file mode 100644 index e4edc510b530..000000000000 --- a/include/asm-powerpc/stat.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef _ASM_POWERPC_STAT_H -#define _ASM_POWERPC_STAT_H -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include - -#define STAT_HAVE_NSEC 1 - -#ifndef __powerpc64__ -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; -#endif /* !__powerpc64__ */ - -struct stat { - unsigned long st_dev; - ino_t st_ino; -#ifdef __powerpc64__ - nlink_t st_nlink; - mode_t st_mode; -#else - mode_t st_mode; - nlink_t st_nlink; -#endif - uid_t st_uid; - gid_t st_gid; - unsigned long st_rdev; - off_t st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -#ifdef __powerpc64__ - unsigned long __unused6; -#endif -}; - -/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */ -struct stat64 { - unsigned long long st_dev; /* Device. */ - unsigned long long st_ino; /* File serial number. */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - unsigned short __pad2; - long long st_size; /* Size of file, in bytes. */ - int st_blksize; /* Optimal block size for I/O. */ - long long st_blocks; /* Number 512-byte blocks allocated. */ - int st_atime; /* Time of last access. */ - unsigned int st_atime_nsec; - int st_mtime; /* Time of last modification. */ - unsigned int st_mtime_nsec; - int st_ctime; /* Time of last status change. */ - unsigned int st_ctime_nsec; - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif /* _ASM_POWERPC_STAT_H */ diff --git a/include/asm-powerpc/statfs.h b/include/asm-powerpc/statfs.h deleted file mode 100644 index 67024026c10d..000000000000 --- a/include/asm-powerpc/statfs.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_POWERPC_STATFS_H -#define _ASM_POWERPC_STATFS_H - -/* For ppc32 we just use the generic definitions, not so simple on ppc64 */ - -#ifndef __powerpc64__ -#include -#else - -#ifndef __KERNEL_STRICT_NAMES -#include -typedef __kernel_fsid_t fsid_t; -#endif - -/* - * We're already 64-bit, so duplicate the definition - */ -struct statfs { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct statfs64 { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; -#endif /* ! __powerpc64__ */ -#endif diff --git a/include/asm-powerpc/string.h b/include/asm-powerpc/string.h deleted file mode 100644 index e40010abcaf1..000000000000 --- a/include/asm-powerpc/string.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_POWERPC_STRING_H -#define _ASM_POWERPC_STRING_H - -#ifdef __KERNEL__ - -#define __HAVE_ARCH_STRCPY -#define __HAVE_ARCH_STRNCPY -#define __HAVE_ARCH_STRLEN -#define __HAVE_ARCH_STRCMP -#define __HAVE_ARCH_STRNCMP -#define __HAVE_ARCH_STRCAT -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE -#define __HAVE_ARCH_MEMCMP -#define __HAVE_ARCH_MEMCHR - -extern char * strcpy(char *,const char *); -extern char * strncpy(char *,const char *, __kernel_size_t); -extern __kernel_size_t strlen(const char *); -extern int strcmp(const char *,const char *); -extern int strncmp(const char *, const char *, __kernel_size_t); -extern char * strcat(char *, const char *); -extern void * memset(void *,int,__kernel_size_t); -extern void * memcpy(void *,const void *,__kernel_size_t); -extern void * memmove(void *,const void *,__kernel_size_t); -extern int memcmp(const void *,const void *,__kernel_size_t); -extern void * memchr(const void *,int,__kernel_size_t); - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_STRING_H */ diff --git a/include/asm-powerpc/suspend.h b/include/asm-powerpc/suspend.h deleted file mode 100644 index cbf2c9404c37..000000000000 --- a/include/asm-powerpc/suspend.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_POWERPC_SUSPEND_H -#define __ASM_POWERPC_SUSPEND_H - -static inline int arch_prepare_suspend(void) { return 0; } - -void save_processor_state(void); -void restore_processor_state(void); - -#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h deleted file mode 100644 index 45963e80f557..000000000000 --- a/include/asm-powerpc/synch.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _ASM_POWERPC_SYNCH_H -#define _ASM_POWERPC_SYNCH_H -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ -extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; -extern void do_lwsync_fixups(unsigned long value, void *fixup_start, - void *fixup_end); - -static inline void eieio(void) -{ - __asm__ __volatile__ ("eieio" : : : "memory"); -} - -static inline void isync(void) -{ - __asm__ __volatile__ ("isync" : : : "memory"); -} -#endif /* __ASSEMBLY__ */ - -#if defined(__powerpc64__) -# define LWSYNC lwsync -#elif defined(CONFIG_E500) -# define LWSYNC \ - START_LWSYNC_SECTION(96); \ - sync; \ - MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); -#else -# define LWSYNC sync -#endif - -#ifdef CONFIG_SMP -#define ISYNC_ON_SMP "\n\tisync\n" -#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" -#else -#define ISYNC_ON_SMP -#define LWSYNC_ON_SMP -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/include/asm-powerpc/syscall.h b/include/asm-powerpc/syscall.h deleted file mode 100644 index efa7f0b879f3..000000000000 --- a/include/asm-powerpc/syscall.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Access to user system call parameters and results - * - * Copyright (C) 2008 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License v.2. - * - * See asm-generic/syscall.h for descriptions of what we must do here. - */ - -#ifndef _ASM_SYSCALL_H -#define _ASM_SYSCALL_H 1 - -#include - -static inline long syscall_get_nr(struct task_struct *task, - struct pt_regs *regs) -{ - return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L; -} - -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - regs->gpr[3] = regs->orig_gpr3; -} - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0; -} - -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->gpr[3]; -} - -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - if (error) { - regs->ccr |= 0x1000L; - regs->gpr[3] = -error; - } else { - regs->ccr &= ~0x1000L; - regs->gpr[3] = val; - } -} - -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - unsigned long *args) -{ - BUG_ON(i + n > 6); -#ifdef CONFIG_PPC64 - if (test_tsk_thread_flag(task, TIF_32BIT)) { - /* - * Zero-extend 32-bit argument values. The high bits are - * garbage ignored by the actual syscall dispatch. - */ - while (n-- > 0) - args[n] = (u32) regs->gpr[3 + i + n]; - return; - } -#endif - memcpy(args, ®s->gpr[3 + i], n * sizeof(args[0])); -} - -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - const unsigned long *args) -{ - BUG_ON(i + n > 6); - memcpy(®s->gpr[3 + i], args, n * sizeof(args[0])); -} - -#endif /* _ASM_SYSCALL_H */ diff --git a/include/asm-powerpc/syscalls.h b/include/asm-powerpc/syscalls.h deleted file mode 100644 index eb8eb400c664..000000000000 --- a/include/asm-powerpc/syscalls.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __ASM_POWERPC_SYSCALLS_H -#define __ASM_POWERPC_SYSCALLS_H -#ifdef __KERNEL__ - -#include -#include -#include -#include - -struct new_utsname; -struct pt_regs; -struct rtas_args; -struct sigaction; - -asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset); -asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); -asmlinkage int sys_execve(unsigned long a0, unsigned long a1, - unsigned long a2, unsigned long a3, unsigned long a4, - unsigned long a5, struct pt_regs *regs); -asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp, - int __user *parent_tidp, void __user *child_threadptr, - int __user *child_tidp, int p6, struct pt_regs *regs); -asmlinkage int sys_fork(unsigned long p1, unsigned long p2, - unsigned long p3, unsigned long p4, unsigned long p5, - unsigned long p6, struct pt_regs *regs); -asmlinkage int sys_vfork(unsigned long p1, unsigned long p2, - unsigned long p3, unsigned long p4, unsigned long p5, - unsigned long p6, struct pt_regs *regs); -asmlinkage long sys_pipe(int __user *fildes); -asmlinkage long sys_pipe2(int __user *fildes, int flags); -asmlinkage long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, size_t sigsetsize); -asmlinkage int sys_ipc(uint call, int first, unsigned long second, - long third, void __user *ptr, long fifth); -asmlinkage long ppc64_personality(unsigned long personality); -asmlinkage int ppc_rtas(struct rtas_args __user *uargs); -asmlinkage time_t sys64_time(time_t __user * tloc); -asmlinkage long ppc_newuname(struct new_utsname __user * name); - -asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, - size_t sigsetsize); -asmlinkage long sys_sigaltstack(const stack_t __user *uss, - stack_t __user *uoss, unsigned long r5, unsigned long r6, - unsigned long r7, unsigned long r8, struct pt_regs *regs); - -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_SYSCALLS_H */ diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h deleted file mode 100644 index e084272ed1c2..000000000000 --- a/include/asm-powerpc/systbl.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * List of powerpc syscalls. For the meaning of the _SPU suffix see - * arch/powerpc/platforms/cell/spu_callbacks.c - */ - -SYSCALL(restart_syscall) -SYSCALL(exit) -PPC_SYS(fork) -SYSCALL_SPU(read) -SYSCALL_SPU(write) -COMPAT_SYS_SPU(open) -SYSCALL_SPU(close) -COMPAT_SYS_SPU(waitpid) -COMPAT_SYS_SPU(creat) -SYSCALL_SPU(link) -SYSCALL_SPU(unlink) -COMPAT_SYS(execve) -SYSCALL_SPU(chdir) -COMPAT_SYS_SPU(time) -SYSCALL_SPU(mknod) -SYSCALL_SPU(chmod) -SYSCALL_SPU(lchown) -SYSCALL(ni_syscall) -OLDSYS(stat) -SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek) -SYSCALL_SPU(getpid) -COMPAT_SYS(mount) -SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount) -SYSCALL_SPU(setuid) -SYSCALL_SPU(getuid) -COMPAT_SYS_SPU(stime) -COMPAT_SYS(ptrace) -SYSCALL_SPU(alarm) -OLDSYS(fstat) -COMPAT_SYS(pause) -COMPAT_SYS(utime) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(access) -COMPAT_SYS_SPU(nice) -SYSCALL(ni_syscall) -SYSCALL_SPU(sync) -COMPAT_SYS_SPU(kill) -SYSCALL_SPU(rename) -COMPAT_SYS_SPU(mkdir) -SYSCALL_SPU(rmdir) -SYSCALL_SPU(dup) -SYSCALL_SPU(pipe) -COMPAT_SYS_SPU(times) -SYSCALL(ni_syscall) -SYSCALL_SPU(brk) -SYSCALL_SPU(setgid) -SYSCALL_SPU(getgid) -SYSCALL(signal) -SYSCALL_SPU(geteuid) -SYSCALL_SPU(getegid) -SYSCALL(acct) -SYSCALL(umount) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(ioctl) -COMPAT_SYS_SPU(fcntl) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(setpgid) -SYSCALL(ni_syscall) -SYSX(sys_ni_syscall,sys_olduname, sys_olduname) -COMPAT_SYS_SPU(umask) -SYSCALL_SPU(chroot) -SYSCALL(ustat) -SYSCALL_SPU(dup2) -SYSCALL_SPU(getppid) -SYSCALL_SPU(getpgrp) -SYSCALL_SPU(setsid) -SYS32ONLY(sigaction) -SYSCALL_SPU(sgetmask) -COMPAT_SYS_SPU(ssetmask) -SYSCALL_SPU(setreuid) -SYSCALL_SPU(setregid) -SYS32ONLY(sigsuspend) -COMPAT_SYS(sigpending) -COMPAT_SYS_SPU(sethostname) -COMPAT_SYS_SPU(setrlimit) -COMPAT_SYS(old_getrlimit) -COMPAT_SYS_SPU(getrusage) -COMPAT_SYS_SPU(gettimeofday) -COMPAT_SYS_SPU(settimeofday) -COMPAT_SYS_SPU(getgroups) -COMPAT_SYS_SPU(setgroups) -SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select) -SYSCALL_SPU(symlink) -OLDSYS(lstat) -COMPAT_SYS_SPU(readlink) -SYSCALL(uselib) -SYSCALL(swapon) -SYSCALL(reboot) -SYSX(sys_ni_syscall,old32_readdir,old_readdir) -SYSCALL_SPU(mmap) -SYSCALL_SPU(munmap) -SYSCALL_SPU(truncate) -SYSCALL_SPU(ftruncate) -SYSCALL_SPU(fchmod) -SYSCALL_SPU(fchown) -COMPAT_SYS_SPU(getpriority) -COMPAT_SYS_SPU(setpriority) -SYSCALL(ni_syscall) -COMPAT_SYS(statfs) -COMPAT_SYS(fstatfs) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(socketcall) -COMPAT_SYS_SPU(syslog) -COMPAT_SYS_SPU(setitimer) -COMPAT_SYS_SPU(getitimer) -COMPAT_SYS_SPU(newstat) -COMPAT_SYS_SPU(newlstat) -COMPAT_SYS_SPU(newfstat) -SYSX(sys_ni_syscall,sys_uname,sys_uname) -SYSCALL(ni_syscall) -SYSCALL_SPU(vhangup) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(wait4) -SYSCALL(swapoff) -COMPAT_SYS_SPU(sysinfo) -COMPAT_SYS(ipc) -SYSCALL_SPU(fsync) -SYS32ONLY(sigreturn) -PPC_SYS(clone) -COMPAT_SYS_SPU(setdomainname) -PPC_SYS_SPU(newuname) -SYSCALL(ni_syscall) -COMPAT_SYS_SPU(adjtimex) -SYSCALL_SPU(mprotect) -SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask) -SYSCALL(ni_syscall) -SYSCALL(init_module) -SYSCALL(delete_module) -SYSCALL(ni_syscall) -SYSCALL(quotactl) -COMPAT_SYS_SPU(getpgid) -SYSCALL_SPU(fchdir) -SYSCALL_SPU(bdflush) -COMPAT_SYS(sysfs) -SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality) -SYSCALL(ni_syscall) -SYSCALL_SPU(setfsuid) -SYSCALL_SPU(setfsgid) -SYSCALL_SPU(llseek) -COMPAT_SYS_SPU(getdents) -SYSX_SPU(sys_select,ppc32_select,ppc_select) -SYSCALL_SPU(flock) -SYSCALL_SPU(msync) -COMPAT_SYS_SPU(readv) -COMPAT_SYS_SPU(writev) -COMPAT_SYS_SPU(getsid) -SYSCALL_SPU(fdatasync) -COMPAT_SYS(sysctl) -SYSCALL_SPU(mlock) -SYSCALL_SPU(munlock) -SYSCALL_SPU(mlockall) -SYSCALL_SPU(munlockall) -COMPAT_SYS_SPU(sched_setparam) -COMPAT_SYS_SPU(sched_getparam) -COMPAT_SYS_SPU(sched_setscheduler) -COMPAT_SYS_SPU(sched_getscheduler) -SYSCALL_SPU(sched_yield) -COMPAT_SYS_SPU(sched_get_priority_max) -COMPAT_SYS_SPU(sched_get_priority_min) -COMPAT_SYS_SPU(sched_rr_get_interval) -COMPAT_SYS_SPU(nanosleep) -SYSCALL_SPU(mremap) -SYSCALL_SPU(setresuid) -SYSCALL_SPU(getresuid) -SYSCALL(ni_syscall) -SYSCALL_SPU(poll) -COMPAT_SYS(nfsservctl) -SYSCALL_SPU(setresgid) -SYSCALL_SPU(getresgid) -COMPAT_SYS_SPU(prctl) -COMPAT_SYS(rt_sigreturn) -COMPAT_SYS(rt_sigaction) -COMPAT_SYS(rt_sigprocmask) -COMPAT_SYS(rt_sigpending) -COMPAT_SYS(rt_sigtimedwait) -COMPAT_SYS(rt_sigqueueinfo) -COMPAT_SYS(rt_sigsuspend) -COMPAT_SYS_SPU(pread64) -COMPAT_SYS_SPU(pwrite64) -SYSCALL_SPU(chown) -SYSCALL_SPU(getcwd) -SYSCALL_SPU(capget) -SYSCALL_SPU(capset) -COMPAT_SYS(sigaltstack) -SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -PPC_SYS(vfork) -COMPAT_SYS_SPU(getrlimit) -COMPAT_SYS_SPU(readahead) -SYS32ONLY(mmap2) -SYS32ONLY(truncate64) -SYS32ONLY(ftruncate64) -SYSX(sys_ni_syscall,sys_stat64,sys_stat64) -SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64) -SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64) -SYSCALL(pciconfig_read) -SYSCALL(pciconfig_write) -SYSCALL(pciconfig_iobase) -SYSCALL(ni_syscall) -SYSCALL_SPU(getdents64) -SYSCALL_SPU(pivot_root) -SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64) -SYSCALL_SPU(madvise) -SYSCALL_SPU(mincore) -SYSCALL_SPU(gettid) -SYSCALL_SPU(tkill) -SYSCALL_SPU(setxattr) -SYSCALL_SPU(lsetxattr) -SYSCALL_SPU(fsetxattr) -SYSCALL_SPU(getxattr) -SYSCALL_SPU(lgetxattr) -SYSCALL_SPU(fgetxattr) -SYSCALL_SPU(listxattr) -SYSCALL_SPU(llistxattr) -SYSCALL_SPU(flistxattr) -SYSCALL_SPU(removexattr) -SYSCALL_SPU(lremovexattr) -SYSCALL_SPU(fremovexattr) -COMPAT_SYS_SPU(futex) -COMPAT_SYS_SPU(sched_setaffinity) -COMPAT_SYS_SPU(sched_getaffinity) -SYSCALL(ni_syscall) -SYSCALL(ni_syscall) -SYS32ONLY(sendfile64) -COMPAT_SYS_SPU(io_setup) -SYSCALL_SPU(io_destroy) -COMPAT_SYS_SPU(io_getevents) -COMPAT_SYS_SPU(io_submit) -SYSCALL_SPU(io_cancel) -SYSCALL(set_tid_address) -SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64) -SYSCALL(exit_group) -SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie) -SYSCALL_SPU(epoll_create) -SYSCALL_SPU(epoll_ctl) -SYSCALL_SPU(epoll_wait) -SYSCALL_SPU(remap_file_pages) -SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create) -COMPAT_SYS_SPU(timer_settime) -COMPAT_SYS_SPU(timer_gettime) -SYSCALL_SPU(timer_getoverrun) -SYSCALL_SPU(timer_delete) -COMPAT_SYS_SPU(clock_settime) -COMPAT_SYS_SPU(clock_gettime) -COMPAT_SYS_SPU(clock_getres) -COMPAT_SYS_SPU(clock_nanosleep) -SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext) -COMPAT_SYS_SPU(tgkill) -COMPAT_SYS_SPU(utimes) -COMPAT_SYS_SPU(statfs64) -COMPAT_SYS_SPU(fstatfs64) -SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64) -PPC_SYS_SPU(rtas) -OLDSYS(debug_setcontext) -SYSCALL(ni_syscall) -COMPAT_SYS(migrate_pages) -COMPAT_SYS(mbind) -COMPAT_SYS(get_mempolicy) -COMPAT_SYS(set_mempolicy) -COMPAT_SYS(mq_open) -SYSCALL(mq_unlink) -COMPAT_SYS(mq_timedsend) -COMPAT_SYS(mq_timedreceive) -COMPAT_SYS(mq_notify) -COMPAT_SYS(mq_getsetattr) -COMPAT_SYS(kexec_load) -COMPAT_SYS(add_key) -COMPAT_SYS(request_key) -COMPAT_SYS(keyctl) -COMPAT_SYS(waitid) -COMPAT_SYS(ioprio_set) -COMPAT_SYS(ioprio_get) -SYSCALL(inotify_init) -SYSCALL(inotify_add_watch) -SYSCALL(inotify_rm_watch) -SYSCALL(spu_run) -SYSCALL(spu_create) -COMPAT_SYS(pselect6) -COMPAT_SYS(ppoll) -SYSCALL_SPU(unshare) -SYSCALL_SPU(splice) -SYSCALL_SPU(tee) -COMPAT_SYS_SPU(vmsplice) -COMPAT_SYS_SPU(openat) -SYSCALL_SPU(mkdirat) -SYSCALL_SPU(mknodat) -SYSCALL_SPU(fchownat) -COMPAT_SYS_SPU(futimesat) -SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64) -SYSCALL_SPU(unlinkat) -SYSCALL_SPU(renameat) -SYSCALL_SPU(linkat) -SYSCALL_SPU(symlinkat) -SYSCALL_SPU(readlinkat) -SYSCALL_SPU(fchmodat) -SYSCALL_SPU(faccessat) -COMPAT_SYS_SPU(get_robust_list) -COMPAT_SYS_SPU(set_robust_list) -COMPAT_SYS_SPU(move_pages) -SYSCALL_SPU(getcpu) -COMPAT_SYS(epoll_pwait) -COMPAT_SYS_SPU(utimensat) -COMPAT_SYS_SPU(signalfd) -SYSCALL_SPU(timerfd_create) -SYSCALL_SPU(eventfd) -COMPAT_SYS_SPU(sync_file_range2) -COMPAT_SYS(fallocate) -SYSCALL(subpage_prot) -COMPAT_SYS_SPU(timerfd_settime) -COMPAT_SYS_SPU(timerfd_gettime) -COMPAT_SYS_SPU(signalfd4) -SYSCALL_SPU(eventfd2) -SYSCALL_SPU(epoll_create1) -SYSCALL_SPU(dup3) -SYSCALL_SPU(pipe2) -SYSCALL(inotify_init1) diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h deleted file mode 100644 index d6648c143322..000000000000 --- a/include/asm-powerpc/system.h +++ /dev/null @@ -1,548 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan - */ -#ifndef _ASM_POWERPC_SYSTEM_H -#define _ASM_POWERPC_SYSTEM_H - -#include -#include - -#include - -/* - * Memory barrier. - * The sync instruction guarantees that all memory accesses initiated - * by this processor have been performed (with respect to all other - * mechanisms that access memory). The eieio instruction is a barrier - * providing an ordering (separately) for (a) cacheable stores and (b) - * loads and stores to non-cacheable memory (e.g. I/O devices). - * - * mb() prevents loads and stores being reordered across this point. - * rmb() prevents loads being reordered across this point. - * wmb() prevents stores being reordered across this point. - * read_barrier_depends() prevents data-dependent loads being reordered - * across this point (nop on PPC). - * - * We have to use the sync instructions for mb(), since lwsync doesn't - * order loads with respect to previous stores. Lwsync is fine for - * rmb(), though. Note that rmb() actually uses a sync on 32-bit - * architectures. - * - * For wmb(), we use sync since wmb is used in drivers to order - * stores to system memory with respect to writes to the device. - * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier - * on SMP since it is only used to order updates to system memory. - */ -#define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ ("sync" : : : "memory") -#define wmb() __asm__ __volatile__ ("sync" : : : "memory") -#define read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#ifdef __KERNEL__ -#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ -#ifdef CONFIG_SMP - -#ifdef __SUBARCH_HAS_LWSYNC -# define SMPWMB lwsync -#else -# define SMPWMB eieio -#endif - -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif /* CONFIG_SMP */ - -/* - * This is a barrier which prevents following instructions from being - * started until the value of the argument x is known. For example, if - * x is a variable loaded from memory, this prevents following - * instructions from being executed until the load has been performed. - */ -#define data_barrier(x) \ - asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); - -struct task_struct; -struct pt_regs; - -#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) - -extern int (*__debugger)(struct pt_regs *regs); -extern int (*__debugger_ipi)(struct pt_regs *regs); -extern int (*__debugger_bpt)(struct pt_regs *regs); -extern int (*__debugger_sstep)(struct pt_regs *regs); -extern int (*__debugger_iabr_match)(struct pt_regs *regs); -extern int (*__debugger_dabr_match)(struct pt_regs *regs); -extern int (*__debugger_fault_handler)(struct pt_regs *regs); - -#define DEBUGGER_BOILERPLATE(__NAME) \ -static inline int __NAME(struct pt_regs *regs) \ -{ \ - if (unlikely(__ ## __NAME)) \ - return __ ## __NAME(regs); \ - return 0; \ -} - -DEBUGGER_BOILERPLATE(debugger) -DEBUGGER_BOILERPLATE(debugger_ipi) -DEBUGGER_BOILERPLATE(debugger_bpt) -DEBUGGER_BOILERPLATE(debugger_sstep) -DEBUGGER_BOILERPLATE(debugger_iabr_match) -DEBUGGER_BOILERPLATE(debugger_dabr_match) -DEBUGGER_BOILERPLATE(debugger_fault_handler) - -#else -static inline int debugger(struct pt_regs *regs) { return 0; } -static inline int debugger_ipi(struct pt_regs *regs) { return 0; } -static inline int debugger_bpt(struct pt_regs *regs) { return 0; } -static inline int debugger_sstep(struct pt_regs *regs) { return 0; } -static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; } -static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } -#endif - -extern int set_dabr(unsigned long dabr); -extern void do_dabr(struct pt_regs *regs, unsigned long address, - unsigned long error_code); -extern void print_backtrace(unsigned long *); -extern void show_regs(struct pt_regs * regs); -extern void flush_instruction_cache(void); -extern void hard_reset_now(void); -extern void poweroff_now(void); - -#ifdef CONFIG_6xx -extern long _get_L2CR(void); -extern long _get_L3CR(void); -extern void _set_L2CR(unsigned long); -extern void _set_L3CR(unsigned long); -#else -#define _get_L2CR() 0L -#define _get_L3CR() 0L -#define _set_L2CR(val) do { } while(0) -#define _set_L3CR(val) do { } while(0) -#endif - -extern void via_cuda_init(void); -extern void read_rtc_time(void); -extern void pmac_find_display(void); -extern void giveup_fpu(struct task_struct *); -extern void disable_kernel_fp(void); -extern void enable_kernel_fp(void); -extern void flush_fp_to_thread(struct task_struct *); -extern void enable_kernel_altivec(void); -extern void giveup_altivec(struct task_struct *); -extern void load_up_altivec(struct task_struct *); -extern int emulate_altivec(struct pt_regs *); -extern void __giveup_vsx(struct task_struct *); -extern void giveup_vsx(struct task_struct *); -extern void enable_kernel_spe(void); -extern void giveup_spe(struct task_struct *); -extern void load_up_spe(struct task_struct *); -extern int fix_alignment(struct pt_regs *); -extern void cvt_fd(float *from, double *to, struct thread_struct *thread); -extern void cvt_df(double *from, float *to, struct thread_struct *thread); - -#ifndef CONFIG_SMP -extern void discard_lazy_cpu_state(void); -#else -static inline void discard_lazy_cpu_state(void) -{ -} -#endif - -#ifdef CONFIG_ALTIVEC -extern void flush_altivec_to_thread(struct task_struct *); -#else -static inline void flush_altivec_to_thread(struct task_struct *t) -{ -} -#endif - -#ifdef CONFIG_VSX -extern void flush_vsx_to_thread(struct task_struct *); -#else -static inline void flush_vsx_to_thread(struct task_struct *t) -{ -} -#endif - -#ifdef CONFIG_SPE -extern void flush_spe_to_thread(struct task_struct *); -#else -static inline void flush_spe_to_thread(struct task_struct *t) -{ -} -#endif - -extern int call_rtas(const char *, int, int, unsigned long *, ...); -extern void cacheable_memzero(void *p, unsigned int nb); -extern void *cacheable_memcpy(void *, const void *, unsigned int); -extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); -extern void bad_page_fault(struct pt_regs *, unsigned long, int); -extern int die(const char *, struct pt_regs *, long); -extern void _exception(int, struct pt_regs *, int, unsigned long); -extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); - -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - -struct device_node; -extern void note_scsi_host(struct device_node *, void *); - -extern struct task_struct *__switch_to(struct task_struct *, - struct task_struct *); -#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) - -struct thread_struct; -extern struct task_struct *_switch(struct thread_struct *prev, - struct thread_struct *next); - -extern unsigned int rtas_data; -extern int mem_init_done; /* set on boot once kmalloc can be called */ -extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ -extern unsigned long memory_limit; -extern unsigned long klimit; - -extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); -extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); - -extern int powersave_nap; /* set if nap mode can be used in idle loop */ - -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - */ -static __always_inline unsigned long -__xchg_u32(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (prev), "+m" (*(volatile unsigned int *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -/* - * Atomic exchange - * - * Changes the memory location '*ptr' to be val and returns - * the previous value stored there. - */ -static __always_inline unsigned long -__xchg_u32_local(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( -"1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned int *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -#ifdef CONFIG_PPC64 -static __always_inline unsigned long -__xchg_u64(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stdcx. %3,0,%2 \n\ - bne- 1b" - ISYNC_ON_SMP - : "=&r" (prev), "+m" (*(volatile unsigned long *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__xchg_u64_local(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__( -"1: ldarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stdcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "+m" (*(volatile unsigned long *)p) - : "r" (p), "r" (val) - : "cc", "memory"); - - return prev; -} -#endif - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). - */ -extern void __xchg_called_with_bad_pointer(void); - -static __always_inline unsigned long -__xchg(volatile void *ptr, unsigned long x, unsigned int size) -{ - switch (size) { - case 4: - return __xchg_u32(ptr, x); -#ifdef CONFIG_PPC64 - case 8: - return __xchg_u64(ptr, x); -#endif - } - __xchg_called_with_bad_pointer(); - return x; -} - -static __always_inline unsigned long -__xchg_local(volatile void *ptr, unsigned long x, unsigned int size) -{ - switch (size) { - case 4: - return __xchg_u32_local(ptr, x); -#ifdef CONFIG_PPC64 - case 8: - return __xchg_u64_local(ptr, x); -#endif - } - __xchg_called_with_bad_pointer(); - return x; -} -#define xchg(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \ - }) - -#define xchg_local(ptr,x) \ - ({ \ - __typeof__(*(ptr)) _x_ = (x); \ - (__typeof__(*(ptr))) __xchg_local((ptr), \ - (unsigned long)_x_, sizeof(*(ptr))); \ - }) - -/* - * Compare and exchange - if *p == old, set it to new, - * and return the old value of *p. - */ -#define __HAVE_ARCH_CMPXCHG 1 - -static __always_inline unsigned long -__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) -{ - unsigned int prev; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ - cmpw 0,%0,%3\n\ - bne- 2f\n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, - unsigned long new) -{ - unsigned int prev; - - __asm__ __volatile__ ( -"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ - cmpw 0,%0,%3\n\ - bne- 2f\n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2\n\ - bne- 1b" - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -#ifdef CONFIG_PPC64 -static __always_inline unsigned long -__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) -{ - unsigned long prev; - - __asm__ __volatile__ ( - LWSYNC_ON_SMP -"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ - cmpd 0,%0,%3\n\ - bne- 2f\n\ - stdcx. %4,0,%2\n\ - bne- 1b" - ISYNC_ON_SMP - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} - -static __always_inline unsigned long -__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, - unsigned long new) -{ - unsigned long prev; - - __asm__ __volatile__ ( -"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ - cmpd 0,%0,%3\n\ - bne- 2f\n\ - stdcx. %4,0,%2\n\ - bne- 1b" - "\n\ -2:" - : "=&r" (prev), "+m" (*p) - : "r" (p), "r" (old), "r" (new) - : "cc", "memory"); - - return prev; -} -#endif - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -static __always_inline unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); -#ifdef CONFIG_PPC64 - case 8: - return __cmpxchg_u64(ptr, old, new); -#endif - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -static __always_inline unsigned long -__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32_local(ptr, old, new); -#ifdef CONFIG_PPC64 - case 8: - return __cmpxchg_u64_local(ptr, old, new); -#endif - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - - -#define cmpxchg_local(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - -#ifdef CONFIG_PPC64 -/* - * We handle most unaligned accesses in hardware. On the other hand - * unaligned DMA can be very expensive on some ppc64 IO chips (it does - * powers of 2 writes until it reaches sufficient alignment). - * - * Based on this we disable the IP header alignment in network drivers. - * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining - * cacheline alignment of buffers. - */ -#define NET_IP_ALIGN 0 -#define NET_SKB_PAD L1_CACHE_BYTES - -#define cmpxchg64(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg((ptr), (o), (n)); \ - }) -#define cmpxchg64_local(ptr, o, n) \ - ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ - cmpxchg_local((ptr), (o), (n)); \ - }) -#else -#include -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#endif - -#define arch_align_stack(x) (x) - -/* Used in very early kernel initialization. */ -extern unsigned long reloc_offset(void); -extern unsigned long add_reloc_offset(unsigned long); -extern void reloc_got2(unsigned long); - -#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void account_system_vtime(struct task_struct *); -#endif - -extern struct dentry *powerpc_debugfs_root; - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/include/asm-powerpc/tce.h b/include/asm-powerpc/tce.h deleted file mode 100644 index f663634cccc9..000000000000 --- a/include/asm-powerpc/tce.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * Rewrite, cleanup: - * Copyright (C) 2004 Olof Johansson , IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ASM_POWERPC_TCE_H -#define _ASM_POWERPC_TCE_H -#ifdef __KERNEL__ - -#include - -/* - * Tces come in two formats, one for the virtual bus and a different - * format for PCI - */ -#define TCE_VB 0 -#define TCE_PCI 1 - -/* TCE page size is 4096 bytes (1 << 12) */ - -#define TCE_SHIFT 12 -#define TCE_PAGE_SIZE (1 << TCE_SHIFT) - -#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */ - -#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */ -#define TCE_RPN_SHIFT 12 -#define TCE_VALID 0x800 /* TCE valid */ -#define TCE_ALLIO 0x400 /* TCE valid for all lpars */ -#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ -#define TCE_PCI_READ 0x1 /* read from PCI allowed */ -#define TCE_VB_WRITE 0x1 /* write from VB allowed */ - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TCE_H */ diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h deleted file mode 100644 index 6698188ca550..000000000000 --- a/include/asm-powerpc/termbits.h +++ /dev/null @@ -1,209 +0,0 @@ -#ifndef _ASM_POWERPC_TERMBITS_H -#define _ASM_POWERPC_TERMBITS_H - -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -/* - * termios type and macro definitions. Be careful about adding stuff - * to this file since it's used in GNU libc and there are strict rules - * concerning namespace pollution. - */ - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t c_line; /* line discipline (== c_cc[19]) */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* For PowerPC the termios and ktermios are the same */ - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t c_line; /* line discipline (== c_cc[19]) */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VMIN 5 -#define VEOL 6 -#define VTIME 7 -#define VEOL2 8 -#define VSWTC 9 -#define VWERASE 10 -#define VREPRINT 11 -#define VSUSP 12 -#define VSTART 13 -#define VSTOP 14 -#define VLNEXT 15 -#define VDISCARD 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IXON 0001000 -#define IXOFF 0002000 -#define IXANY 0004000 -#define IUCLC 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define ONLCR 0000002 -#define OLCUC 0000004 - -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 - -#define OFILL 00000100 -#define OFDEL 00000200 -#define NLDLY 00001400 -#define NL0 00000000 -#define NL1 00000400 -#define NL2 00001000 -#define NL3 00001400 -#define TABDLY 00006000 -#define TAB0 00000000 -#define TAB1 00002000 -#define TAB2 00004000 -#define TAB3 00006000 -#define XTABS 00006000 /* required by POSIX to == TAB3 */ -#define CRDLY 00030000 -#define CR0 00000000 -#define CR1 00010000 -#define CR2 00020000 -#define CR3 00030000 -#define FFDLY 00040000 -#define FF0 00000000 -#define FF1 00040000 -#define BSDLY 00100000 -#define BS0 00000000 -#define BS1 00100000 -#define VTDLY 00200000 -#define VT0 00000000 -#define VT1 00200000 - -/* c_cflag bit meaning */ -#define CBAUD 0000377 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CBAUDEX 0000000 -#define B57600 00020 -#define B115200 00021 -#define B230400 00022 -#define B460800 00023 -#define B500000 00024 -#define B576000 00025 -#define B921600 00026 -#define B1000000 00027 -#define B1152000 00030 -#define B1500000 00031 -#define B2000000 00032 -#define B2500000 00033 -#define B3000000 00034 -#define B3500000 00035 -#define B4000000 00036 -#define BOTHER 00037 - -#define CIBAUD 077600000 -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -#define CSIZE 00001400 -#define CS5 00000000 -#define CS6 00000400 -#define CS7 00001000 -#define CS8 00001400 - -#define CSTOPB 00002000 -#define CREAD 00004000 -#define PARENB 00010000 -#define PARODD 00020000 -#define HUPCL 00040000 - -#define CLOCAL 00100000 -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -/* c_lflag bits */ -#define ISIG 0x00000080 -#define ICANON 0x00000100 -#define XCASE 0x00004000 -#define ECHO 0x00000008 -#define ECHOE 0x00000002 -#define ECHOK 0x00000004 -#define ECHONL 0x00000010 -#define NOFLSH 0x80000000 -#define TOSTOP 0x00400000 -#define ECHOCTL 0x00000040 -#define ECHOPRT 0x00000020 -#define ECHOKE 0x00000001 -#define FLUSHO 0x00800000 -#define PENDIN 0x20000000 -#define IEXTEN 0x00000400 - -/* Values for the ACTION argument to `tcflow'. */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_POWERPC_TERMBITS_H */ diff --git a/include/asm-powerpc/termios.h b/include/asm-powerpc/termios.h deleted file mode 100644 index 2c14fea07c8a..000000000000 --- a/include/asm-powerpc/termios.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef _ASM_POWERPC_TERMIOS_H -#define _ASM_POWERPC_TERMIOS_H - -/* - * Liberally adapted from alpha/termios.h. In particular, the c_cc[] - * fields have been reordered so that termio & termios share the - * common subset in the same order (for brain dead programs that don't - * know or care about the differences). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include - -struct sgttyb { - char sg_ispeed; - char sg_ospeed; - char sg_erase; - char sg_kill; - short sg_flags; -}; - -struct tchars { - char t_intrc; - char t_quitc; - char t_startc; - char t_stopc; - char t_eofc; - char t_brkc; -}; - -struct ltchars { - char t_suspc; - char t_dsuspc; - char t_rprntc; - char t_flushc; - char t_werasc; - char t_lnextc; -}; - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 10 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* c_cc characters */ -#define _VINTR 0 -#define _VQUIT 1 -#define _VERASE 2 -#define _VKILL 3 -#define _VEOF 4 -#define _VMIN 5 -#define _VEOL 6 -#define _VTIME 7 -#define _VEOL2 8 -#define _VSWTC 9 - -#ifdef __KERNEL__ -/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ -#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" -#endif - -#ifdef __KERNEL__ - -#include - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h deleted file mode 100644 index 9665a26a253a..000000000000 --- a/include/asm-powerpc/thread_info.h +++ /dev/null @@ -1,161 +0,0 @@ -/* thread_info.h: PowerPC low-level thread information - * adapted from the i386 version by Paul Mackerras - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_POWERPC_THREAD_INFO_H -#define _ASM_POWERPC_THREAD_INFO_H - -#ifdef __KERNEL__ - -/* We have 8k stacks on ppc32 and 16k on ppc64 */ - -#ifdef CONFIG_PPC64 -#define THREAD_SHIFT 14 -#else -#define THREAD_SHIFT 13 -#endif - -#define THREAD_SIZE (1 << THREAD_SHIFT) - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include - -/* - * low level task data. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - struct restart_block restart_block; - unsigned long local_flags; /* private flags for thread */ - - /* low level flags - has atomic operations done on it */ - unsigned long flags ____cacheline_aligned_in_smp; -}; - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ - .flags = 0, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* thread information allocation */ - -#if THREAD_SHIFT >= PAGE_SHIFT - -#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) - -#else /* THREAD_SHIFT < PAGE_SHIFT */ - -#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR - -extern struct thread_info *alloc_thread_info(struct task_struct *tsk); -extern void free_thread_info(struct thread_info *ti); - -#endif /* THREAD_SHIFT < PAGE_SHIFT */ - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - register unsigned long sp asm("r1"); - - /* gcc4, at least, is smart enough to turn this into a single - * rlwinm for ppc32 and clrrdi for ppc64 */ - return (struct thread_info *)(sp & ~(THREAD_SIZE-1)); -} - -#endif /* __ASSEMBLY__ */ - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_32BIT 4 /* 32 bit binary */ -#define TIF_PERFMON_WORK 5 /* work for pfm_handle_work() */ -#define TIF_PERFMON_CTXSW 6 /* perfmon needs ctxsw calls */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SINGLESTEP 8 /* singlestepping active */ -#define TIF_MEMDIE 9 -#define TIF_SECCOMP 10 /* secure computing */ -#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ -#define TIF_NOERROR 12 /* Force successful syscall return */ -#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ -#define TIF_FREEZE 14 /* Freezing for suspend */ -#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ -#define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<local_flags |= _TLF_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_THREAD_INFO_H */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h deleted file mode 100644 index febd581ec9b0..000000000000 --- a/include/asm-powerpc/time.h +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Common time prototypes and such for all ppc machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __POWERPC_TIME_H -#define __POWERPC_TIME_H - -#ifdef __KERNEL__ -#include -#include - -#include -#ifdef CONFIG_PPC_ISERIES -#include -#include -#include -#endif - -/* time.c */ -extern unsigned long tb_ticks_per_jiffy; -extern unsigned long tb_ticks_per_usec; -extern unsigned long tb_ticks_per_sec; -extern u64 tb_to_xs; -extern unsigned tb_to_us; - -struct rtc_time; -extern void to_tm(int tim, struct rtc_time * tm); -extern void GregorianDay(struct rtc_time *tm); -extern time_t last_rtc_update; - -extern void generic_calibrate_decr(void); -extern void wakeup_decrementer(void); -extern void snapshot_timebase(void); - -extern void set_dec_cpu6(unsigned int val); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -extern unsigned long ppc_proc_freq; -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) -extern unsigned long ppc_tb_freq; -#define DEFAULT_TB_FREQ 125000000UL - -/* - * By putting all of this stuff into a single struct we - * reduce the number of cache lines touched by do_gettimeofday. - * Both by collecting all of the data in one cache line and - * by touching only one TOC entry on ppc64. - */ -struct gettimeofday_vars { - u64 tb_to_xs; - u64 stamp_xsec; - u64 tb_orig_stamp; -}; - -struct gettimeofday_struct { - unsigned long tb_ticks_per_sec; - struct gettimeofday_vars vars[2]; - struct gettimeofday_vars * volatile varp; - unsigned var_idx; - unsigned tb_to_us; -}; - -struct div_result { - u64 result_high; - u64 result_low; -}; - -/* Accessor functions for the timebase (RTC on 601) registers. */ -/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ -#ifdef CONFIG_6xx -#define __USE_RTC() (!cpu_has_feature(CPU_FTR_USE_TB)) -#else -#define __USE_RTC() 0 -#endif - -#ifdef CONFIG_PPC64 - -/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */ -#define get_tbl get_tb - -#else - -static inline unsigned long get_tbl(void) -{ -#if defined(CONFIG_403GCX) - unsigned long tbl; - asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); - return tbl; -#else - return mftbl(); -#endif -} - -static inline unsigned int get_tbu(void) -{ -#ifdef CONFIG_403GCX - unsigned int tbu; - asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); - return tbu; -#else - return mftbu(); -#endif -} -#endif /* !CONFIG_PPC64 */ - -static inline unsigned int get_rtcl(void) -{ - unsigned int rtcl; - - asm volatile("mfrtcl %0" : "=r" (rtcl)); - return rtcl; -} - -static inline u64 get_rtc(void) -{ - unsigned int hi, lo, hi2; - - do { - asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2" - : "=r" (hi), "=r" (lo), "=r" (hi2)); - } while (hi2 != hi); - return (u64)hi * 1000000000 + lo; -} - -#ifdef CONFIG_PPC64 -static inline u64 get_tb(void) -{ - return mftb(); -} -#else /* CONFIG_PPC64 */ -static inline u64 get_tb(void) -{ - unsigned int tbhi, tblo, tbhi2; - - do { - tbhi = get_tbu(); - tblo = get_tbl(); - tbhi2 = get_tbu(); - } while (tbhi != tbhi2); - - return ((u64)tbhi << 32) | tblo; -} -#endif /* !CONFIG_PPC64 */ - -static inline u64 get_tb_or_rtc(void) -{ - return __USE_RTC() ? get_rtc() : get_tb(); -} - -static inline void set_tb(unsigned int upper, unsigned int lower) -{ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, upper); - mtspr(SPRN_TBWL, lower); -} - -/* Accessor functions for the decrementer register. - * The 4xx doesn't even have a decrementer. I tried to use the - * generic timer interrupt code, which seems OK, with the 4xx PIT - * in auto-reload mode. The problem is PIT stops counting when it - * hits zero. If it would wrap, we could use it just like a decrementer. - */ -static inline unsigned int get_dec(void) -{ -#if defined(CONFIG_40x) - return (mfspr(SPRN_PIT)); -#else - return (mfspr(SPRN_DEC)); -#endif -} - -/* - * Note: Book E and 4xx processors differ from other PowerPC processors - * in when the decrementer generates its interrupt: on the 1 to 0 - * transition for Book E/4xx, but on the 0 to -1 transition for others. - */ -static inline void set_dec(int val) -{ -#if defined(CONFIG_40x) - mtspr(SPRN_PIT, val); -#elif defined(CONFIG_8xx_CPU6) - set_dec_cpu6(val - 1); -#else -#ifndef CONFIG_BOOKE - --val; -#endif -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES) && - get_lppaca()->shared_proc) { - get_lppaca()->virtual_decr = val; - if (get_dec() > val) - HvCall_setVirtualDecr(); - return; - } -#endif - mtspr(SPRN_DEC, val); -#endif /* not 40x or 8xx_CPU6 */ -} - -static inline unsigned long tb_ticks_since(unsigned long tstamp) -{ - if (__USE_RTC()) { - int delta = get_rtcl() - (unsigned int) tstamp; - return delta < 0 ? delta + 1000000000 : delta; - } - return get_tbl() - tstamp; -} - -#define mulhwu(x,y) \ -({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) - -#ifdef CONFIG_PPC64 -#define mulhdu(x,y) \ -({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) -#else -extern u64 mulhdu(u64, u64); -#endif - -extern void smp_space_timers(unsigned int); - -extern unsigned mulhwu_scale_factor(unsigned, unsigned); -extern void div128_by_32(u64 dividend_high, u64 dividend_low, - unsigned divisor, struct div_result *dr); - -/* Used to store Processor Utilization register (purr) values */ - -struct cpu_usage { - u64 current_tb; /* Holds the current purr register values */ -}; - -DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); - -#if defined(CONFIG_VIRT_CPU_ACCOUNTING) -extern void calculate_steal_time(void); -extern void snapshot_timebases(void); -#define account_process_vtime(tsk) account_process_tick(tsk, 0) -#else -#define calculate_steal_time() do { } while (0) -#define snapshot_timebases() do { } while (0) -#define account_process_vtime(tsk) do { } while (0) -#endif - -extern void secondary_cpu_time_init(void); -extern void iSeries_time_init_early(void); - -#endif /* __KERNEL__ */ -#endif /* __POWERPC_TIME_H */ diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h deleted file mode 100644 index c55e14f7ef44..000000000000 --- a/include/asm-powerpc/timex.h +++ /dev/null @@ -1,50 +0,0 @@ -#ifndef _ASM_POWERPC_TIMEX_H -#define _ASM_POWERPC_TIMEX_H - -#ifdef __KERNEL__ - -/* - * PowerPC architecture timex specifications - */ - -#include -#include - -#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ -#ifdef __powerpc64__ - return mftb(); -#else - cycles_t ret; - - /* - * For the "cycle" counter we use the timebase lower half. - * Currently only used on SMP. - */ - - ret = 0; - - __asm__ __volatile__( - "97: mftb %0\n" - "99:\n" - ".section __ftr_fixup,\"a\"\n" - ".align 2\n" - "98:\n" - " .long %1\n" - " .long 0\n" - " .long 97b-98b\n" - " .long 99b-98b\n" - " .long 0\n" - " .long 0\n" - ".previous" - : "=r" (ret) : "i" (CPU_FTR_601)); - return ret; -#endif -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TIMEX_H */ diff --git a/include/asm-powerpc/tlb.h b/include/asm-powerpc/tlb.h deleted file mode 100644 index e20ff7541f36..000000000000 --- a/include/asm-powerpc/tlb.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * TLB shootdown specifics for powerpc - * - * Copyright (C) 2002 Anton Blanchard, IBM Corp. - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_POWERPC_TLB_H -#define _ASM_POWERPC_TLB_H -#ifdef __KERNEL__ - -#ifndef __powerpc64__ -#include -#endif -#include -#include -#ifndef __powerpc64__ -#include -#include -#endif - -#include - -struct mmu_gather; - -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) - -#if !defined(CONFIG_PPC_STD_MMU) - -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#elif defined(__powerpc64__) - -extern void pte_free_finish(void); - -static inline void tlb_flush(struct mmu_gather *tlb) -{ - struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); - - /* If there's a TLB batch pending, then we must flush it because the - * pages are going to be freed and we really don't want to have a CPU - * access a freed page because it has a stale TLB - */ - if (tlbbatch->index) - __flush_tlb_pending(tlbbatch); - - pte_free_finish(); -} - -#else - -extern void tlb_flush(struct mmu_gather *tlb); - -#endif - -/* Get the generic bits... */ -#include - -#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__) - -#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) - -#else -extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, - unsigned long address); - -static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, - unsigned long address) -{ - if (pte_val(*ptep) & _PAGE_HASHPTE) - flush_hash_entry(tlb->mm, ptep, address); -} - -#endif -#endif /* __KERNEL__ */ -#endif /* __ASM_POWERPC_TLB_H */ diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h deleted file mode 100644 index 361cd5c7a32b..000000000000 --- a/include/asm-powerpc/tlbflush.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _ASM_POWERPC_TLBFLUSH_H -#define _ASM_POWERPC_TLBFLUSH_H - -/* - * TLB flushing: - * - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifdef __KERNEL__ - -#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE) -/* - * TLB flushing for software loaded TLB chips - * - * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & - * flush_tlb_kernel_range are best implemented as tlbia vs - * specific tlbie's - */ - -#include - -extern void _tlbie(unsigned long address, unsigned int pid); - -#if defined(CONFIG_40x) || defined(CONFIG_8xx) -#define _tlbia() asm volatile ("tlbia; sync" : : : "memory") -#else /* CONFIG_44x || CONFIG_FSL_BOOKE */ -extern void _tlbia(void); -#endif - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - _tlbia(); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ - _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); -} - -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) -{ - _tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0); -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - _tlbia(); -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - _tlbia(); -} - -#elif defined(CONFIG_PPC32) -/* - * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx - */ -extern void _tlbie(unsigned long address); -extern void _tlbia(void); - -extern void flush_tlb_mm(struct mm_struct *mm); -extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); -extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); -extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end); -extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); - -#else -/* - * TLB flushing for 64-bit has-MMU CPUs - */ - -#include -#include - -#define PPC64_TLB_BATCH_NR 192 - -struct ppc64_tlb_batch { - int active; - unsigned long index; - struct mm_struct *mm; - real_pte_t pte[PPC64_TLB_BATCH_NR]; - unsigned long vaddr[PPC64_TLB_BATCH_NR]; - unsigned int psize; - int ssize; -}; -DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); - -extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); - -extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, unsigned long pte, int huge); - -#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE - -static inline void arch_enter_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - - batch->active = 1; -} - -static inline void arch_leave_lazy_mmu_mode(void) -{ - struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - - if (batch->index) - __flush_tlb_pending(batch); - batch->active = 0; -} - -#define arch_flush_lazy_mmu_mode() do {} while (0) - - -extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize, - int ssize, int local); -extern void flush_hash_range(unsigned long number, int local); - - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_page_nohash(struct vm_area_struct *vma, - unsigned long vmaddr) -{ -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ -} - -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ -} - -/* Private function for use by PCI IO mapping code */ -extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start, - unsigned long end); - - -#endif - -#endif /*__KERNEL__ */ -#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h deleted file mode 100644 index c32da6f97999..000000000000 --- a/include/asm-powerpc/topology.h +++ /dev/null @@ -1,117 +0,0 @@ -#ifndef _ASM_POWERPC_TOPOLOGY_H -#define _ASM_POWERPC_TOPOLOGY_H -#ifdef __KERNEL__ - - -struct sys_device; -struct device_node; - -#ifdef CONFIG_NUMA - -#include - -static inline int cpu_to_node(int cpu) -{ - return numa_cpu_lookup_table[cpu]; -} - -#define parent_node(node) (node) - -static inline cpumask_t node_to_cpumask(int node) -{ - return numa_cpumask_lookup_table[node]; -} - -static inline int node_to_first_cpu(int node) -{ - cpumask_t tmp; - tmp = node_to_cpumask(node); - return first_cpu(tmp); -} - -int of_node_to_nid(struct device_node *device); - -struct pci_bus; -#ifdef CONFIG_PCI -extern int pcibus_to_node(struct pci_bus *bus); -#else -static inline int pcibus_to_node(struct pci_bus *bus) -{ - return -1; -} -#endif - -#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ - CPU_MASK_ALL : \ - node_to_cpumask(pcibus_to_node(bus)) \ - ) - -/* sched_domains SD_NODE_INIT for PPC64 machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .span = CPU_MASK_NONE, \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 3, \ - .idle_idx = 1, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_NEWIDLE \ - | SD_WAKE_IDLE \ - | SD_SERIALIZE \ - | SD_WAKE_BALANCE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - -extern void __init dump_numa_cpu_topology(void); - -extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); -extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid); - -#else - -static inline int of_node_to_nid(struct device_node *device) -{ - return 0; -} - -static inline void dump_numa_cpu_topology(void) {} - -static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid) -{ - return 0; -} - -static inline void sysfs_remove_device_from_node(struct sys_device *dev, - int nid) -{ -} - -#endif /* CONFIG_NUMA */ - -#include - -#ifdef CONFIG_SMP -#include -#define smt_capable() (cpu_has_feature(CPU_FTR_SMT)) - -#ifdef CONFIG_PPC64 -#include - -#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) -#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu)) -#define topology_core_id(cpu) (cpu_to_core_id(cpu)) -#endif -#endif - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_TOPOLOGY_H */ diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h deleted file mode 100644 index f8b60793b7a9..000000000000 --- a/include/asm-powerpc/tsi108.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * common routine and memory layout for Tundra TSI108(Grendel) host bridge - * memory controller. - * - * Author: Jacob Pan (jacob.pan@freescale.com) - * Alex Bounine (alexandreb@tundra.com) - * - * Copyright 2004-2006 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __PPC_KERNEL_TSI108_H -#define __PPC_KERNEL_TSI108_H - -#include - -/* Size of entire register space */ -#define TSI108_REG_SIZE (0x10000) - -/* Sizes of register spaces for individual blocks */ -#define TSI108_HLP_SIZE 0x1000 -#define TSI108_PCI_SIZE 0x1000 -#define TSI108_CLK_SIZE 0x1000 -#define TSI108_PB_SIZE 0x1000 -#define TSI108_SD_SIZE 0x1000 -#define TSI108_DMA_SIZE 0x1000 -#define TSI108_ETH_SIZE 0x1000 -#define TSI108_I2C_SIZE 0x400 -#define TSI108_MPIC_SIZE 0x400 -#define TSI108_UART0_SIZE 0x200 -#define TSI108_GPIO_SIZE 0x200 -#define TSI108_UART1_SIZE 0x200 - -/* Offsets within Tsi108(A) CSR space for individual blocks */ -#define TSI108_HLP_OFFSET 0x0000 -#define TSI108_PCI_OFFSET 0x1000 -#define TSI108_CLK_OFFSET 0x2000 -#define TSI108_PB_OFFSET 0x3000 -#define TSI108_SD_OFFSET 0x4000 -#define TSI108_DMA_OFFSET 0x5000 -#define TSI108_ETH_OFFSET 0x6000 -#define TSI108_I2C_OFFSET 0x7000 -#define TSI108_MPIC_OFFSET 0x7400 -#define TSI108_UART0_OFFSET 0x7800 -#define TSI108_GPIO_OFFSET 0x7A00 -#define TSI108_UART1_OFFSET 0x7C00 - -/* Tsi108 registers used by common code components */ -#define TSI108_PCI_CSR (0x004) -#define TSI108_PCI_IRP_CFG_CTL (0x180) -#define TSI108_PCI_IRP_STAT (0x184) -#define TSI108_PCI_IRP_ENABLE (0x188) -#define TSI108_PCI_IRP_INTAD (0x18C) - -#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) -#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) - -#define TSI108_CG_PWRUP_STATUS (0x234) - -#define TSI108_PB_ISR (0x00C) -#define TSI108_PB_ERRCS (0x404) -#define TSI108_PB_AERR (0x408) - -#define TSI108_PB_ERRCS_ES (1 << 1) -#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) - -#define TSI108_PCI_CFG_SIZE (0x01000000) - -/* - * PHY Configuration Options - * - * Specify "bcm54xx" in the compatible property of your device tree phy - * nodes if your board uses the Broadcom PHYs - */ -#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ -#define TSI108_PHY_BCM54XX 1 /* Broardcom BCM54xx PHY */ - -/* Global variables */ - -extern u32 tsi108_pci_cfg_base; -/* Exported functions */ - -extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base); -extern unsigned long tsi108_get_mem_size(void); -extern unsigned long tsi108_get_cpu_clk(void); -extern unsigned long tsi108_get_sdc_clk(void); -extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 val); -extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int len, u32 * val); -extern void tsi108_clear_pci_error(u32 pci_cfg_base); - -extern phys_addr_t get_csrbase(void); - -typedef struct { - u32 regs; /* hw registers base address */ - u32 phyregs; /* phy registers base address */ - u16 phy; /* phy address */ - u16 irq_num; /* irq number */ - u8 mac_addr[6]; /* phy mac address */ - u16 phy_type; /* type of phy on board */ -} hw_info; - -extern u32 get_vir_csrbase(void); -extern u32 tsi108_csr_vir_base; - -static inline u32 tsi108_read_reg(u32 reg_offset) -{ - return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); -} - -static inline void tsi108_write_reg(u32 reg_offset, u32 val) -{ - out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); -} - -#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h deleted file mode 100644 index 6ed93979fbe4..000000000000 --- a/include/asm-powerpc/tsi108_irq.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2005 Tundra Semiconductor Corp. - * Alex Bounine, - -/* Register definitions */ -#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10) -#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14) -#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18) -#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c) -#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c) -#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204) -#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208) -#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c) -#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210) -#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214) -#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220) -#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230) - -extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary); -extern void tsi108_pci_int_init(struct device_node *node); -extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); -extern void tsi108_clear_pci_cfg_error(void); - -#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/include/asm-powerpc/types.h b/include/asm-powerpc/types.h deleted file mode 100644 index d3374bc865ba..000000000000 --- a/include/asm-powerpc/types.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef _ASM_POWERPC_TYPES_H -#define _ASM_POWERPC_TYPES_H - -#ifdef __powerpc64__ -# include -#else -# include -#endif - -#ifndef __ASSEMBLY__ - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __powerpc64__ -typedef unsigned int umode_t; -#else -typedef unsigned short umode_t; -#endif - -typedef struct { - __u32 u[4]; -} __attribute__((aligned(16))) __vector128; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __powerpc64__ -#define BITS_PER_LONG 64 -#else -#define BITS_PER_LONG 32 -#endif - -#ifndef __ASSEMBLY__ - -typedef __vector128 vector128; - -/* Physical address used by some IO functions */ -#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT) -typedef u64 phys_addr_t; -#else -typedef u32 phys_addr_t; -#endif - -#ifdef __powerpc64__ -typedef u64 dma_addr_t; -#else -typedef u32 dma_addr_t; -#endif -typedef u64 dma64_addr_t; - -typedef struct { - unsigned long entry; - unsigned long toc; - unsigned long env; -} func_descr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_TYPES_H */ diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h deleted file mode 100644 index bd0fb8495154..000000000000 --- a/include/asm-powerpc/uaccess.h +++ /dev/null @@ -1,496 +0,0 @@ -#ifndef _ARCH_POWERPC_UACCESS_H -#define _ARCH_POWERPC_UACCESS_H - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(~0UL) -#ifdef __powerpc64__ -/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ -#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) -#else -#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -#endif - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#ifdef __powerpc64__ -/* - * This check is sufficient because there is a large enough - * gap between user addresses and the kernel addresses - */ -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && ((size) <= (segment).seg)) - -#else - -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && \ - (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) - -#endif - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((__force unsigned long)(addr), (size), get_fs())) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry { - unsigned long insn; - unsigned long fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x, ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) -#define put_user(x, ptr) \ - __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user(x, ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user(x, ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#ifndef __powerpc64__ -#define __get_user64(x, ptr) \ - __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user64(x, ptr) __put_user(x, ptr) -#endif - -#define __get_user_inatomic(x, ptr) \ - __get_user_nosleep((x), (ptr), sizeof(*(ptr))) -#define __put_user_inatomic(x, ptr) \ - __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user_unaligned __get_user -#define __put_user_unaligned __put_user - -extern long __put_user_bad(void); - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: " op " %1,0(%2) # put_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __put_user_asm2(x, ptr, retval) \ - __put_user_asm(x, ptr, retval, "std") -#else /* __powerpc64__ */ -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __put_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ - case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ - case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ - case 8: __put_user_asm2(x, ptr, retval); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (!is_kernel_addr((unsigned long)__pu_addr)) \ - might_sleep(); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_nosleep(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - - -extern long __get_user_bad(void); - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # get_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err), "=r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __get_user_asm2(x, addr, err) \ - __get_user_asm(x, addr, err, "ld") -#else /* __powerpc64__ */ -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err), "=&r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - if (size > sizeof(x)) \ - (x) = __get_user_bad(); \ - switch (size) { \ - case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ - case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ - case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ - case 8: __get_user_asm2(x, ptr, retval); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#ifndef __powerpc64__ -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) -#endif /* __powerpc64__ */ - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_nosleep(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - - -/* more complex routines */ - -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); - -#ifndef __powerpc64__ - -static inline unsigned long copy_from_user(void *to, - const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, - n - over) + over; - } - return n; -} - -static inline unsigned long copy_to_user(void __user *to, - const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *)from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *)from, - n - over) + over; - } - return n; -} - -#else /* __powerpc64__ */ - -#define __copy_in_user(to, from, size) \ - __copy_tofrom_user((to), (from), (size)) - -extern unsigned long copy_from_user(void *to, const void __user *from, - unsigned long n); -extern unsigned long copy_to_user(void __user *to, const void *from, - unsigned long n); -extern unsigned long copy_in_user(void __user *to, const void __user *from, - unsigned long n); - -#endif /* __powerpc64__ */ - -static inline unsigned long __copy_from_user_inatomic(void *to, - const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __get_user_size(*(u8 *)to, from, 1, ret); - break; - case 2: - __get_user_size(*(u16 *)to, from, 2, ret); - break; - case 4: - __get_user_size(*(u32 *)to, from, 4, ret); - break; - case 8: - __get_user_size(*(u64 *)to, from, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user((__force void __user *)to, from, n); -} - -static inline unsigned long __copy_to_user_inatomic(void __user *to, - const void *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); - break; - case 2: - __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); - break; - case 4: - __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); - break; - case 8: - __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user(to, (__force const void __user *)from, n); -} - -static inline unsigned long __copy_from_user(void *to, - const void __user *from, unsigned long size) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, - const void *from, unsigned long size) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, size); -} - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -static inline unsigned long clear_user(void __user *addr, unsigned long size) -{ - might_sleep(); - if (likely(access_ok(VERIFY_WRITE, addr, size))) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -static inline long strncpy_from_user(char *dst, const char __user *src, - long count) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, src, 1))) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -static inline int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h deleted file mode 100644 index 46b09ba6bead..000000000000 --- a/include/asm-powerpc/ucc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * Internal header file for UCC unit routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_H__ -#define __UCC_H__ - -#include -#include - -#define STATISTICS - -#define UCC_MAX_NUM 8 - -/* Slow or fast type for UCCs. -*/ -enum ucc_speed_type { - UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX, - UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX -}; - -/* ucc_set_type - * Sets UCC to slow or fast mode. - * - * ucc_num - (In) number of UCC (0-7). - * speed - (In) slow or fast mode for UCC. - */ -int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed); - -int ucc_set_qe_mux_mii_mng(unsigned int ucc_num); - -int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, - enum comm_dir mode); - -int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask); - -/* QE MUX clock routing for UCC -*/ -static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT); -} - -static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA); -} - -static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set) -{ - return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT); -} - -#endif /* __UCC_H__ */ diff --git a/include/asm-powerpc/ucc_fast.h b/include/asm-powerpc/ucc_fast.h deleted file mode 100644 index fce16abe7ee1..000000000000 --- a/include/asm-powerpc/ucc_fast.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * include/asm-powerpc/ucc_fast.h - * - * Internal header file for UCC FAST unit routines. - * - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_FAST_H__ -#define __UCC_FAST_H__ - -#include - -#include -#include - -#include "ucc.h" - -/* Receive BD's status */ -#define R_E 0x80000000 /* buffer empty */ -#define R_W 0x20000000 /* wrap bit */ -#define R_I 0x10000000 /* interrupt on reception */ -#define R_L 0x08000000 /* last */ -#define R_F 0x04000000 /* first */ - -/* transmit BD's status */ -#define T_R 0x80000000 /* ready bit */ -#define T_W 0x20000000 /* wrap bit */ -#define T_I 0x10000000 /* interrupt on completion */ -#define T_L 0x08000000 /* last */ - -/* Rx Data buffer must be 4 bytes aligned in most cases */ -#define UCC_FAST_RX_ALIGN 4 -#define UCC_FAST_MRBLR_ALIGNMENT 4 -#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT 8 - -/* Sizes */ -#define UCC_FAST_URFS_MIN_VAL 0x88 -#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR 8 - -/* ucc_fast_channel_protocol_mode - UCC FAST mode */ -enum ucc_fast_channel_protocol_mode { - UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000, - UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001, - UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002, - UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003, - UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004, - UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005, - UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006, - UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007, - UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008, - UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009, - UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A, - UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B, - UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C, - UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D, - UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E, - UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F -}; - -/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */ -enum ucc_fast_transparent_txrx { - UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000, - UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000 -}; - -/* UCC fast diagnostic mode */ -enum ucc_fast_diag_mode { - UCC_FAST_DIAGNOSTIC_NORMAL = 0x0, - UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000, - UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000, - UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000 -}; - -/* UCC fast Sync length (transparent mode only) */ -enum ucc_fast_sync_len { - UCC_FAST_SYNC_LEN_NOT_USED = 0x0, - UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000, - UCC_FAST_SYNC_LEN_8_BIT = 0x00008000, - UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000 -}; - -/* UCC fast RTS mode */ -enum ucc_fast_ready_to_send { - UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000, - UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000 -}; - -/* UCC fast receiver decoding mode */ -enum ucc_fast_rx_decoding_method { - UCC_FAST_RX_ENCODING_NRZ = 0x00000000, - UCC_FAST_RX_ENCODING_NRZI = 0x00000800, - UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000, - UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800 -}; - -/* UCC fast transmitter encoding mode */ -enum ucc_fast_tx_encoding_method { - UCC_FAST_TX_ENCODING_NRZ = 0x00000000, - UCC_FAST_TX_ENCODING_NRZI = 0x00000100, - UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200, - UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300 -}; - -/* UCC fast CRC length */ -enum ucc_fast_transparent_tcrc { - UCC_FAST_16_BIT_CRC = 0x00000000, - UCC_FAST_CRC_RESERVED0 = 0x00000040, - UCC_FAST_32_BIT_CRC = 0x00000080, - UCC_FAST_CRC_RESERVED1 = 0x000000C0 -}; - -/* Fast UCC initialization structure */ -struct ucc_fast_info { - int ucc_num; - enum qe_clock rx_clock; - enum qe_clock tx_clock; - u32 regs; - int irq; - u32 uccm_mask; - int bd_mem_part; - int brkpt_support; - int grant_support; - int tsa; - int cdp; - int cds; - int ctsp; - int ctss; - int tci; - int txsy; - int rtsm; - int revd; - int rsyn; - u16 max_rx_buf_length; - u16 urfs; - u16 urfet; - u16 urfset; - u16 utfs; - u16 utfet; - u16 utftt; - u16 ufpt; - enum ucc_fast_channel_protocol_mode mode; - enum ucc_fast_transparent_txrx ttx_trx; - enum ucc_fast_tx_encoding_method tenc; - enum ucc_fast_rx_decoding_method renc; - enum ucc_fast_transparent_tcrc tcrc; - enum ucc_fast_sync_len synl; -}; - -struct ucc_fast_private { - struct ucc_fast_info *uf_info; - struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */ - u32 __iomem *p_ucce; /* a pointer to the event register in memory. */ - u32 __iomem *p_uccm; /* a pointer to the mask register in memory. */ -#ifdef CONFIG_UGETH_TX_ON_DEMAND - u16 __iomem *p_utodr; /* pointer to the transmit on demand register */ -#endif - int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ - int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ - int stopped_tx; /* Whether channel has been stopped for Tx - (STOP_TX, etc.) */ - int stopped_rx; /* Whether channel has been stopped for Rx */ - u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx - virtual fifo */ - u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx - virtual fifo */ -#ifdef STATISTICS - u32 tx_frames; /* Transmitted frames counter. */ - u32 rx_frames; /* Received frames counter (only frames - passed to application). */ - u32 tx_discarded; /* Discarded tx frames counter (frames that - were discarded by the driver due to errors). - */ - u32 rx_discarded; /* Discarded rx frames counter (frames that - were discarded by the driver due to errors). - */ -#endif /* STATISTICS */ - u16 mrblr; /* maximum receive buffer length */ -}; - -/* ucc_fast_init - * Initializes Fast UCC according to user provided parameters. - * - * uf_info - (In) pointer to the fast UCC info structure. - * uccf_ret - (Out) pointer to the fast UCC structure. - */ -int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret); - -/* ucc_fast_free - * Frees all resources for fast UCC. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_free(struct ucc_fast_private * uccf); - -/* ucc_fast_enable - * Enables a fast UCC port. - * This routine enables Tx and/or Rx through the General UCC Mode Register. - * - * uccf - (In) pointer to the fast UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode); - -/* ucc_fast_disable - * Disables a fast UCC port. - * This routine disables Tx and/or Rx through the General UCC Mode Register. - * - * uccf - (In) pointer to the fast UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode); - -/* ucc_fast_irq - * Handles interrupts on fast UCC. - * Called from the general interrupt routine to handle interrupts on fast UCC. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_irq(struct ucc_fast_private * uccf); - -/* ucc_fast_transmit_on_demand - * Immediately forces a poll of the transmitter for data to be sent. - * Typically, the hardware performs a periodic poll for data that the - * transmit routine has set up to be transmitted. In cases where - * this polling cycle is not soon enough, this optional routine can - * be invoked to force a poll right away, instead. Proper use for - * each transmission for which this functionality is desired is to - * call the transmit routine and then this routine right after. - * - * uccf - (In) pointer to the fast UCC structure. - */ -void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf); - -u32 ucc_fast_get_qe_cr_subblock(int uccf_num); - -void ucc_fast_dump_regs(struct ucc_fast_private * uccf); - -#endif /* __UCC_FAST_H__ */ diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h deleted file mode 100644 index 0980e6ad335b..000000000000 --- a/include/asm-powerpc/ucc_slow.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish - * Li Yang - * - * Description: - * Internal header file for UCC SLOW unit routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_SLOW_H__ -#define __UCC_SLOW_H__ - -#include - -#include -#include - -#include "ucc.h" - -/* transmit BD's status */ -#define T_R 0x80000000 /* ready bit */ -#define T_PAD 0x40000000 /* add pads to short frames */ -#define T_W 0x20000000 /* wrap bit */ -#define T_I 0x10000000 /* interrupt on completion */ -#define T_L 0x08000000 /* last */ - -#define T_A 0x04000000 /* Address - the data transmitted as address - chars */ -#define T_TC 0x04000000 /* transmit CRC */ -#define T_CM 0x02000000 /* continuous mode */ -#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ -#define T_P 0x01000000 /* Preamble - send Preamble sequence before - data */ -#define T_HB 0x01000000 /* heartbeat */ -#define T_NS 0x00800000 /* No Stop */ -#define T_LC 0x00800000 /* late collision */ -#define T_RL 0x00400000 /* retransmission limit */ -#define T_UN 0x00020000 /* underrun */ -#define T_CT 0x00010000 /* CTS lost */ -#define T_CSL 0x00010000 /* carrier sense lost */ -#define T_RC 0x003c0000 /* retry count */ - -/* Receive BD's status */ -#define R_E 0x80000000 /* buffer empty */ -#define R_W 0x20000000 /* wrap bit */ -#define R_I 0x10000000 /* interrupt on reception */ -#define R_L 0x08000000 /* last */ -#define R_C 0x08000000 /* the last byte in this buffer is a cntl - char */ -#define R_F 0x04000000 /* first */ -#define R_A 0x04000000 /* the first byte in this buffer is address - byte */ -#define R_CM 0x02000000 /* continuous mode */ -#define R_ID 0x01000000 /* buffer close on reception of idles */ -#define R_M 0x01000000 /* Frame received because of promiscuous - mode */ -#define R_AM 0x00800000 /* Address match */ -#define R_DE 0x00800000 /* Address match */ -#define R_LG 0x00200000 /* Break received */ -#define R_BR 0x00200000 /* Frame length violation */ -#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ -#define R_FR 0x00100000 /* Framing Error (no stop bit) character - received */ -#define R_PR 0x00080000 /* Parity Error character received */ -#define R_AB 0x00080000 /* Frame Aborted */ -#define R_SH 0x00080000 /* frame is too short */ -#define R_CR 0x00040000 /* CRC Error */ -#define R_OV 0x00020000 /* Overrun */ -#define R_CD 0x00010000 /* CD lost */ -#define R_CL 0x00010000 /* this frame is closed because of a - collision */ - -/* Rx Data buffer must be 4 bytes aligned in most cases.*/ -#define UCC_SLOW_RX_ALIGN 4 -#define UCC_SLOW_MRBLR_ALIGNMENT 4 -#define UCC_SLOW_PRAM_SIZE 0x100 -#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 - -/* UCC Slow Channel Protocol Mode */ -enum ucc_slow_channel_protocol_mode { - UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, -}; - -/* UCC Slow Transparent Transmit CRC (TCRC) */ -enum ucc_slow_transparent_tcrc { - /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, - /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, - /* 32-bit CCITT CRC (Ethernet and HDLC) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, -}; - -/* UCC Slow oversampling rate for transmitter (TDCR) */ -enum ucc_slow_tx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, -}; - -/* UCC Slow Oversampling rate for receiver (RDCR) -*/ -enum ucc_slow_rx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, -}; - -/* UCC Slow Transmitter encoding method (TENC) -*/ -enum ucc_slow_tx_encoding_method { - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 -}; - -/* UCC Slow Receiver decoding method (RENC) -*/ -enum ucc_slow_rx_decoding_method { - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 -}; - -/* UCC Slow Diagnostic mode (DIAG) -*/ -enum ucc_slow_diag_mode { - UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, - UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, - UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, - UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 -}; - -struct ucc_slow_info { - int ucc_num; - int protocol; /* QE_CR_PROTOCOL_xxx */ - enum qe_clock rx_clock; - enum qe_clock tx_clock; - phys_addr_t regs; - int irq; - u16 uccm_mask; - int data_mem_part; - int init_tx; - int init_rx; - u32 tx_bd_ring_len; - u32 rx_bd_ring_len; - int rx_interrupts; - int brkpt_support; - int grant_support; - int tsa; - int cdp; - int cds; - int ctsp; - int ctss; - int rinv; - int tinv; - int rtsm; - int rfw; - int tci; - int tend; - int tfl; - int txsy; - u16 max_rx_buf_length; - enum ucc_slow_transparent_tcrc tcrc; - enum ucc_slow_channel_protocol_mode mode; - enum ucc_slow_diag_mode diag; - enum ucc_slow_tx_oversampling_rate tdcr; - enum ucc_slow_rx_oversampling_rate rdcr; - enum ucc_slow_tx_encoding_method tenc; - enum ucc_slow_rx_decoding_method renc; -}; - -struct ucc_slow_private { - struct ucc_slow_info *us_info; - struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ - struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ - u32 us_pram_offset; - int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ - int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ - int stopped_tx; /* Whether channel has been stopped for Tx - (STOP_TX, etc.) */ - int stopped_rx; /* Whether channel has been stopped for Rx */ - struct list_head confQ; /* frames passed to chip waiting for tx */ - u32 first_tx_bd_mask; /* mask is used in Tx routine to save status - and length for first BD in a frame */ - u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ - u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ - struct qe_bd *confBd; /* next BD for confirm after Tx */ - struct qe_bd *tx_bd; /* next BD for new Tx request */ - struct qe_bd *rx_bd; /* next BD to collect after Rx */ - void *p_rx_frame; /* accumulating receive frame */ - u16 *p_ucce; /* a pointer to the event register in memory. - */ - u16 *p_uccm; /* a pointer to the mask register in memory */ - u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ -#ifdef STATISTICS - u32 tx_frames; /* Transmitted frames counters */ - u32 rx_frames; /* Received frames counters (only frames - passed to application) */ - u32 rx_discarded; /* Discarded frames counters (frames that - were discarded by the driver due to - errors) */ -#endif /* STATISTICS */ -}; - -/* ucc_slow_init - * Initializes Slow UCC according to provided parameters. - * - * us_info - (In) pointer to the slow UCC info structure. - * uccs_ret - (Out) pointer to the slow UCC structure. - */ -int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); - -/* ucc_slow_free - * Frees all resources for slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_free(struct ucc_slow_private * uccs); - -/* ucc_slow_enable - * Enables a fast UCC port. - * This routine enables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_disable - * Disables a fast UCC port. - * This routine disables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_poll_transmitter_now - * Immediately forces a poll of the transmitter for data to be sent. - * Typically, the hardware performs a periodic poll for data that the - * transmit routine has set up to be transmitted. In cases where - * this polling cycle is not soon enough, this optional routine can - * be invoked to force a poll right away, instead. Proper use for - * each transmission for which this functionality is desired is to - * call the transmit routine and then this routine right after. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs); - -/* ucc_slow_graceful_stop_tx - * Smoothly stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_stop_tx - * Stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_restart_tx - * Restarts transmitting on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_restart_tx(struct ucc_slow_private *uccs); - -u32 ucc_slow_get_qe_cr_subblock(int uccs_num); - -#endif /* __UCC_SLOW_H__ */ diff --git a/include/asm-powerpc/ucontext.h b/include/asm-powerpc/ucontext.h deleted file mode 100644 index d9a4ddf0cc86..000000000000 --- a/include/asm-powerpc/ucontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _ASM_POWERPC_UCONTEXT_H -#define _ASM_POWERPC_UCONTEXT_H - -#ifdef __powerpc64__ -#include -#else -#include -#endif -#include - -#ifndef __powerpc64__ -struct mcontext { - elf_gregset_t mc_gregs; - elf_fpregset_t mc_fregs; - unsigned long mc_pad[2]; - elf_vrregset_t mc_vregs __attribute__((__aligned__(16))); -}; -#endif - -struct ucontext { - unsigned long uc_flags; - struct ucontext __user *uc_link; - stack_t uc_stack; -#ifndef __powerpc64__ - int uc_pad[7]; - struct mcontext __user *uc_regs;/* points to uc_mcontext field */ -#endif - sigset_t uc_sigmask; - /* glibc has 1024-bit signal masks, ours are 64-bit */ -#ifdef __powerpc64__ - sigset_t __unused[15]; /* Allow for uc_sigmask growth */ - struct sigcontext uc_mcontext; /* last for extensibility */ -#else - int uc_maskext[30]; - int uc_pad2[3]; - struct mcontext uc_mcontext; -#endif -}; - -#endif /* _ASM_POWERPC_UCONTEXT_H */ diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h deleted file mode 100644 index 6418ceea44b7..000000000000 --- a/include/asm-powerpc/udbg.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * (c) 2001, 2006 IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_UDBG_H -#define _ASM_POWERPC_UDBG_H -#ifdef __KERNEL__ - -#include -#include - -extern void (*udbg_putc)(char c); -extern int (*udbg_getc)(void); -extern int (*udbg_getc_poll)(void); - -extern void udbg_puts(const char *s); -extern int udbg_write(const char *s, int n); -extern int udbg_read(char *buf, int buflen); - -extern void register_early_udbg_console(void); -extern void udbg_printf(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); -extern void udbg_progress(char *s, unsigned short hex); - -extern void udbg_init_uart(void __iomem *comport, unsigned int speed, - unsigned int clock); -extern unsigned int udbg_probe_uart_speed(void __iomem *comport, - unsigned int clock); - -struct device_node; -extern void udbg_scc_init(int force_scc); -extern int udbg_adb_init(int force_btext); -extern void udbg_adb_init_early(void); - -extern void __init udbg_early_init(void); -extern void __init udbg_init_debug_lpar(void); -extern void __init udbg_init_pmac_realmode(void); -extern void __init udbg_init_maple_realmode(void); -extern void __init udbg_init_pas_realmode(void); -extern void __init udbg_init_iseries(void); -extern void __init udbg_init_rtas_panel(void); -extern void __init udbg_init_rtas_console(void); -extern void __init udbg_init_debug_beat(void); -extern void __init udbg_init_btext(void); -extern void __init udbg_init_44x_as1(void); -extern void __init udbg_init_40x_realmode(void); -extern void __init udbg_init_cpm(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UDBG_H */ diff --git a/include/asm-powerpc/uic.h b/include/asm-powerpc/uic.h deleted file mode 100644 index 970eb7e2186a..000000000000 --- a/include/asm-powerpc/uic.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * include/asm-powerpc/uic.h - * - * IBM PPC4xx UIC external definitions and structure. - * - * Maintainer: David Gibson - * Copyright 2007 IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_UIC_H -#define _ASM_POWERPC_UIC_H - -#ifdef __KERNEL__ - -extern void __init uic_init_tree(void); -extern unsigned int uic_get_irq(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UIC_H */ diff --git a/include/asm-powerpc/unaligned.h b/include/asm-powerpc/unaligned.h deleted file mode 100644 index 5f1b1e3c2137..000000000000 --- a/include/asm-powerpc/unaligned.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_POWERPC_UNALIGNED_H -#define _ASM_POWERPC_UNALIGNED_H - -#ifdef __KERNEL__ - -/* - * The PowerPC can do unaligned accesses itself in big endian mode. - */ -#include -#include - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h deleted file mode 100644 index f737732c3861..000000000000 --- a/include/asm-powerpc/uninorth.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * uninorth.h: definitions for using the "UniNorth" host bridge chip - * from Apple. This chip is used on "Core99" machines - * This also includes U2 used on more recent MacRISC2/3 - * machines and U3 (G5) - * - */ -#ifdef __KERNEL__ -#ifndef __ASM_UNINORTH_H__ -#define __ASM_UNINORTH_H__ - -/* - * Uni-N and U3 config space reg. definitions - * - * (Little endian) - */ - -/* Address ranges selection. This one should work with Bandit too */ -/* Not U3 */ -#define UNI_N_ADDR_SELECT 0x48 -#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ -#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ - -/* AGP registers */ -/* Not U3 */ -#define UNI_N_CFG_GART_BASE 0x8c -#define UNI_N_CFG_AGP_BASE 0x90 -#define UNI_N_CFG_GART_CTRL 0x94 -#define UNI_N_CFG_INTERNAL_STATUS 0x98 -#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 - -/* UNI_N_CFG_GART_CTRL bits definitions */ -#define UNI_N_CFG_GART_INVAL 0x00000001 -#define UNI_N_CFG_GART_ENABLE 0x00000100 -#define UNI_N_CFG_GART_2xRESET 0x00010000 -#define UNI_N_CFG_GART_DISSBADET 0x00020000 -/* The following seems to only be used only on U3 */ -#define U3_N_CFG_GART_SYNCMODE 0x00040000 -#define U3_N_CFG_GART_PERFRD 0x00080000 -#define U3_N_CFG_GART_B2BGNT 0x00200000 -#define U3_N_CFG_GART_FASTDDR 0x00400000 - -/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, - * revision 1.5 (x4 AGP) may need further changes. - * - * AGP_BASE register contains the base address of the AGP aperture on - * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, - * even if decoding of this address range is enabled in the address select - * register. Apparently, the only supported bases are 256Mb multiples - * (high 4 bits of that register). - * - * GART_BASE register appear to contain the physical address of the GART - * in system memory in the high address bits (page aligned), and the - * GART size in the low order bits (number of GART pages) - * - * The GART format itself is one 32bits word per physical memory page. - * This word contains, in little-endian format (!!!), the physical address - * of the page in the high bits, and what appears to be an "enable" bit - * in the LSB bit (0) that must be set to 1 when the entry is valid. - * - * Obviously, the GART is not cache coherent and so any change to it - * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. - * - * In order to invalidate the GART (which is probably necessary to inval - * the bridge internal TLBs), the following sequence has to be written, - * in order, to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * UNI_N_CFG_GART_ENABLE - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET - * UNI_N_CFG_GART_ENABLE - * - * As far as AGP "features" are concerned, it looks like fast write may - * not be supported but this has to be confirmed. - * - * Turning on AGP seem to require a double invalidate operation, one before - * setting the AGP command register, on after. - * - * Turning off AGP seems to require the following sequence: first wait - * for the AGP to be idle by reading the internal status register, then - * write in that order to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * 0 - * UNI_N_CFG_GART_2xRESET - * 0 - */ - -/* - * Uni-N memory mapped reg. definitions - * - * Those registers are Big-Endian !! - * - * Their meaning come from either Darwin and/or from experiments I made with - * the bootrom, I'm not sure about their exact meaning yet - * - */ - -/* Version of the UniNorth chip */ -#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ - -#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ -#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ -#define UNI_N_VERSION_150 0x0011 /* 1.5 */ -#define UNI_N_VERSION_200 0x0024 /* 2.0 */ -#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ -#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ -#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ - -/* This register is used to enable/disable various clocks */ -#define UNI_N_CLOCK_CNTL 0x0020 -#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ -#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ -#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ -#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ - -/* Power Management control */ -#define UNI_N_POWER_MGT 0x0030 -#define UNI_N_POWER_MGT_NORMAL 0x00 -#define UNI_N_POWER_MGT_IDLE2 0x01 -#define UNI_N_POWER_MGT_SLEEP 0x02 - -/* This register is configured by Darwin depending on the UniN - * revision - */ -#define UNI_N_ARB_CTRL 0x0040 -#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 -#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 -#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 -#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 - -/* This one _might_ return the CPU number of the CPU reading it; - * the bootROM decides whether to boot or to sleep/spinloop depending - * on this register beeing 0 or not - */ -#define UNI_N_CPU_NUMBER 0x0050 - -/* This register appear to be read by the bootROM to decide what - * to do on a non-recoverable reset (powerup or wakeup) - */ -#define UNI_N_HWINIT_STATE 0x0070 -#define UNI_N_HWINIT_STATE_SLEEPING 0x01 -#define UNI_N_HWINIT_STATE_RUNNING 0x02 -/* This last bit appear to be used by the bootROM to know the second - * CPU has started and will enter it's sleep loop with IP=0 - */ -#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 - -/* This register controls AACK delay, which is set when 2004 iBook/PowerBook - * is in low speed mode. - */ -#define UNI_N_AACK_DELAY 0x0100 -#define UNI_N_AACK_DELAY_ENABLE 0x00000001 - -/* Clock status for Intrepid */ -#define UNI_N_CLOCK_STOP_STATUS0 0x0150 -#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 -#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 -#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 -#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 -#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 -#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 -#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 -#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 -#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 -#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 -#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 -#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 -#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 -#define UNI_N_CLOCK_STOPPED_32 0x00000004 -#define UNI_N_CLOCK_STOPPED_45 0x00000002 -#define UNI_N_CLOCK_STOPPED_49 0x00000001 - -#define UNI_N_CLOCK_STOP_STATUS1 0x0160 -#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 -#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 -#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 -#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 -#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 -#define UNI_N_CLOCK_STOPPED_FW 0x00004000 -#define UNI_N_CLOCK_STOPPED_GB 0x00002000 -#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 -#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 -#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 -#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 -#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 -#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 -#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 -#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 -#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 -#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 -#define UNI_N_CLOCK_STOPPED_18 0x00000001 - -/* Intrepid registe to OF do-platform-clockspreading */ -#define UNI_N_CLOCK_SPREADING 0x190 - -/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ - - -/* - * U3 specific registers - */ - - -/* U3 Toggle */ -#define U3_TOGGLE_REG 0x00e0 -#define U3_PMC_START_STOP 0x0001 -#define U3_MPIC_RESET 0x0002 -#define U3_MPIC_OUTPUT_ENABLE 0x0004 - -/* U3 API PHY Config 1 */ -#define U3_API_PHY_CONFIG_1 0x23030 - -/* U3 HyperTransport registers */ -#define U3_HT_CONFIG_BASE 0x70000 -#define U3_HT_LINK_COMMAND 0x100 -#define U3_HT_LINK_CONFIG 0x110 -#define U3_HT_LINK_FREQ 0x120 - -#endif /* __ASM_UNINORTH_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h deleted file mode 100644 index e07d0c76ed77..000000000000 --- a/include/asm-powerpc/unistd.h +++ /dev/null @@ -1,398 +0,0 @@ -#ifndef _ASM_POWERPC_UNISTD_H_ -#define _ASM_POWERPC_UNISTD_H_ - -/* - * This file contains the system call numbers. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_query_module 166 -#define __NR_poll 167 -#define __NR_nfsservctl 168 -#define __NR_setresgid 169 -#define __NR_getresgid 170 -#define __NR_prctl 171 -#define __NR_rt_sigreturn 172 -#define __NR_rt_sigaction 173 -#define __NR_rt_sigprocmask 174 -#define __NR_rt_sigpending 175 -#define __NR_rt_sigtimedwait 176 -#define __NR_rt_sigqueueinfo 177 -#define __NR_rt_sigsuspend 178 -#define __NR_pread64 179 -#define __NR_pwrite64 180 -#define __NR_chown 181 -#define __NR_getcwd 182 -#define __NR_capget 183 -#define __NR_capset 184 -#define __NR_sigaltstack 185 -#define __NR_sendfile 186 -#define __NR_getpmsg 187 /* some people actually want streams */ -#define __NR_putpmsg 188 /* some people actually want streams */ -#define __NR_vfork 189 -#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ -#define __NR_readahead 191 -#ifndef __powerpc64__ /* these are 32-bit only */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#endif -#define __NR_pciconfig_read 198 -#define __NR_pciconfig_write 199 -#define __NR_pciconfig_iobase 200 -#define __NR_multiplexer 201 -#define __NR_getdents64 202 -#define __NR_pivot_root 203 -#ifndef __powerpc64__ -#define __NR_fcntl64 204 -#endif -#define __NR_madvise 205 -#define __NR_mincore 206 -#define __NR_gettid 207 -#define __NR_tkill 208 -#define __NR_setxattr 209 -#define __NR_lsetxattr 210 -#define __NR_fsetxattr 211 -#define __NR_getxattr 212 -#define __NR_lgetxattr 213 -#define __NR_fgetxattr 214 -#define __NR_listxattr 215 -#define __NR_llistxattr 216 -#define __NR_flistxattr 217 -#define __NR_removexattr 218 -#define __NR_lremovexattr 219 -#define __NR_fremovexattr 220 -#define __NR_futex 221 -#define __NR_sched_setaffinity 222 -#define __NR_sched_getaffinity 223 -/* 224 currently unused */ -#define __NR_tuxcall 225 -#ifndef __powerpc64__ -#define __NR_sendfile64 226 -#endif -#define __NR_io_setup 227 -#define __NR_io_destroy 228 -#define __NR_io_getevents 229 -#define __NR_io_submit 230 -#define __NR_io_cancel 231 -#define __NR_set_tid_address 232 -#define __NR_fadvise64 233 -#define __NR_exit_group 234 -#define __NR_lookup_dcookie 235 -#define __NR_epoll_create 236 -#define __NR_epoll_ctl 237 -#define __NR_epoll_wait 238 -#define __NR_remap_file_pages 239 -#define __NR_timer_create 240 -#define __NR_timer_settime 241 -#define __NR_timer_gettime 242 -#define __NR_timer_getoverrun 243 -#define __NR_timer_delete 244 -#define __NR_clock_settime 245 -#define __NR_clock_gettime 246 -#define __NR_clock_getres 247 -#define __NR_clock_nanosleep 248 -#define __NR_swapcontext 249 -#define __NR_tgkill 250 -#define __NR_utimes 251 -#define __NR_statfs64 252 -#define __NR_fstatfs64 253 -#ifndef __powerpc64__ -#define __NR_fadvise64_64 254 -#endif -#define __NR_rtas 255 -#define __NR_sys_debug_setcontext 256 -/* Number 257 is reserved for vserver */ -#define __NR_migrate_pages 258 -#define __NR_mbind 259 -#define __NR_get_mempolicy 260 -#define __NR_set_mempolicy 261 -#define __NR_mq_open 262 -#define __NR_mq_unlink 263 -#define __NR_mq_timedsend 264 -#define __NR_mq_timedreceive 265 -#define __NR_mq_notify 266 -#define __NR_mq_getsetattr 267 -#define __NR_kexec_load 268 -#define __NR_add_key 269 -#define __NR_request_key 270 -#define __NR_keyctl 271 -#define __NR_waitid 272 -#define __NR_ioprio_set 273 -#define __NR_ioprio_get 274 -#define __NR_inotify_init 275 -#define __NR_inotify_add_watch 276 -#define __NR_inotify_rm_watch 277 -#define __NR_spu_run 278 -#define __NR_spu_create 279 -#define __NR_pselect6 280 -#define __NR_ppoll 281 -#define __NR_unshare 282 -#define __NR_splice 283 -#define __NR_tee 284 -#define __NR_vmsplice 285 -#define __NR_openat 286 -#define __NR_mkdirat 287 -#define __NR_mknodat 288 -#define __NR_fchownat 289 -#define __NR_futimesat 290 -#ifdef __powerpc64__ -#define __NR_newfstatat 291 -#else -#define __NR_fstatat64 291 -#endif -#define __NR_unlinkat 292 -#define __NR_renameat 293 -#define __NR_linkat 294 -#define __NR_symlinkat 295 -#define __NR_readlinkat 296 -#define __NR_fchmodat 297 -#define __NR_faccessat 298 -#define __NR_get_robust_list 299 -#define __NR_set_robust_list 300 -#define __NR_move_pages 301 -#define __NR_getcpu 302 -#define __NR_epoll_pwait 303 -#define __NR_utimensat 304 -#define __NR_signalfd 305 -#define __NR_timerfd_create 306 -#define __NR_eventfd 307 -#define __NR_sync_file_range2 308 -#define __NR_fallocate 309 -#define __NR_subpage_prot 310 -#define __NR_timerfd_settime 311 -#define __NR_timerfd_gettime 312 -#define __NR_signalfd4 313 -#define __NR_eventfd2 314 -#define __NR_epoll_create1 315 -#define __NR_dup3 316 -#define __NR_pipe2 317 -#define __NR_inotify_init1 318 - -#ifdef __KERNEL__ - -#define __NR_syscalls 319 - -#define __NR__exit __NR_exit -#define NR_syscalls __NR_syscalls - -#ifndef __ASSEMBLY__ - -#include -#include -#include - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLD_GETRLIMIT -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION -#define __ARCH_WANT_SYS_RT_SIGSUSPEND -#ifdef CONFIG_PPC32 -#define __ARCH_WANT_OLD_STAT -#endif -#ifdef CONFIG_PPC64 -#define __ARCH_WANT_COMPAT_SYS_TIME -#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND -#define __ARCH_WANT_SYS_NEWFSTATAT -#endif - -/* - * "Conditional" syscalls - */ -#define cond_syscall(x) \ - asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall"))) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/include/asm-powerpc/user.h b/include/asm-powerpc/user.h deleted file mode 100644 index 3fd4545dd74e..000000000000 --- a/include/asm-powerpc/user.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_POWERPC_USER_H -#define _ASM_POWERPC_USER_H - -#include -#include - -/* - * Adapted from - * - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd, NOT the osf-core). The file contents - * are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ -struct user { - struct pt_regs regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) -#endif /* _ASM_POWERPC_USER_H */ diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h deleted file mode 100644 index 26fc449bd989..000000000000 --- a/include/asm-powerpc/vdso.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __PPC64_VDSO_H__ -#define __PPC64_VDSO_H__ - -#ifdef __KERNEL__ - -/* Default link addresses for the vDSOs */ -#define VDSO32_LBASE 0x100000 -#define VDSO64_LBASE 0x100000 - -/* Default map addresses */ -#define VDSO32_MBASE VDSO32_LBASE -#define VDSO64_MBASE VDSO64_LBASE - -#define VDSO_VERSION_STRING LINUX_2.6.15 - -/* Define if 64 bits VDSO has procedure descriptors */ -#undef VDS64_HAS_DESCRIPTORS - -#ifndef __ASSEMBLY__ - -/* Offsets relative to thread->vdso_base */ -extern unsigned long vdso64_rt_sigtramp; -extern unsigned long vdso32_sigtramp; -extern unsigned long vdso32_rt_sigtramp; - -#else /* __ASSEMBLY__ */ - -#ifdef __VDSO64__ -#ifdef VDS64_HAS_DESCRIPTORS -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - .section ".opd","a"; \ - .align 3; \ - name: \ - .quad .name,.TOC.@tocbase,0; \ - .previous; \ - .globl .name; \ - .type .name,@function; \ - .name: \ - -#define V_FUNCTION_END(name) \ - .size .name,.-.name; - -#define V_LOCAL_FUNC(name) (.name) - -#else /* VDS64_HAS_DESCRIPTORS */ - -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - name: \ - -#define V_FUNCTION_END(name) \ - .size name,.-name; - -#define V_LOCAL_FUNC(name) (name) - -#endif /* VDS64_HAS_DESCRIPTORS */ -#endif /* __VDSO64__ */ - -#ifdef __VDSO32__ - -#define V_FUNCTION_BEGIN(name) \ - .globl name; \ - .type name,@function; \ - name: \ - -#define V_FUNCTION_END(name) \ - .size name,.-name; - -#define V_LOCAL_FUNC(name) (name) - -#endif /* __VDSO32__ */ - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __PPC64_VDSO_H__ */ diff --git a/include/asm-powerpc/vdso_datapage.h b/include/asm-powerpc/vdso_datapage.h deleted file mode 100644 index f01393224b52..000000000000 --- a/include/asm-powerpc/vdso_datapage.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _VDSO_DATAPAGE_H -#define _VDSO_DATAPAGE_H -#ifdef __KERNEL__ - -/* - * Copyright (C) 2002 Peter Bergner , IBM - * Copyright (C) 2005 Benjamin Herrenschmidy , - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - -/* - * Note about this structure: - * - * This structure was historically called systemcfg and exposed to - * userland via /proc/ppc64/systemcfg. Unfortunately, this became an - * ABI issue as some proprietary software started relying on being able - * to mmap() it, thus we have to keep the base layout at least for a - * few kernel versions. - * - * However, since ppc32 doesn't suffer from this backward handicap, - * a simpler version of the data structure is used there with only the - * fields actually used by the vDSO. - * - */ - -/* - * If the major version changes we are incompatible. - * Minor version changes are a hint. - */ -#define SYSTEMCFG_MAJOR 1 -#define SYSTEMCFG_MINOR 1 - -#ifndef __ASSEMBLY__ - -#include - -#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32) - -/* - * So here is the ppc64 backward compatible version - */ - -#ifdef CONFIG_PPC64 - -struct vdso_data { - __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ - struct { /* Systemcfg version numbers */ - __u32 major; /* Major number 0x10 */ - __u32 minor; /* Minor number 0x14 */ - } version; - - /* Note about the platform flags: it now only contains the lpar - * bit. The actual platform number is dead and burried - */ - __u32 platform; /* Platform flags 0x18 */ - __u32 processor; /* Processor type 0x1C */ - __u64 processorCount; /* # of physical processors 0x20 */ - __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ - __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ - __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ - __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ - __u64 stamp_xsec; /* 0x48 */ - __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ - __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ - __u32 tz_dsttime; /* Type of dst correction 0x5C */ - __u32 dcache_size; /* L1 d-cache size 0x60 */ - __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ - __u32 icache_size; /* L1 i-cache size 0x68 */ - __u32 icache_line_size; /* L1 i-cache line size 0x6C */ - - /* those additional ones don't have to be located anywhere - * special as they were not part of the original systemcfg - */ - __u32 dcache_block_size; /* L1 d-cache block size */ - __u32 icache_block_size; /* L1 i-cache block size */ - __u32 dcache_log_block_size; /* L1 d-cache log block size */ - __u32 icache_log_block_size; /* L1 i-cache log block size */ - __s32 wtom_clock_sec; /* Wall to monotonic clock */ - __s32 wtom_clock_nsec; - __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ - __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ -}; - -#else /* CONFIG_PPC64 */ - -/* - * And here is the simpler 32 bits version - */ -struct vdso_data { - __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ - __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ - __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ - __u64 stamp_xsec; /* 0x48 */ - __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */ - __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ - __u32 tz_dsttime; /* Type of dst correction 0x5C */ - __s32 wtom_clock_sec; /* Wall to monotonic clock */ - __s32 wtom_clock_nsec; - __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ - __u32 dcache_block_size; /* L1 d-cache block size */ - __u32 icache_block_size; /* L1 i-cache block size */ - __u32 dcache_log_block_size; /* L1 d-cache log block size */ - __u32 icache_log_block_size; /* L1 i-cache log block size */ -}; - -#endif /* CONFIG_PPC64 */ - -#ifdef __KERNEL__ -extern struct vdso_data *vdso_data; -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ -#endif /* _SYSTEMCFG_H */ diff --git a/include/asm-powerpc/vga.h b/include/asm-powerpc/vga.h deleted file mode 100644 index a2eac409c1ec..000000000000 --- a/include/asm-powerpc/vga.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _ASM_POWERPC_VGA_H_ -#define _ASM_POWERPC_VGA_H_ - -#ifdef __KERNEL__ - -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares - */ - - -#include - - -#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) - -#define VT_BUF_HAVE_RW -/* - * These are only needed for supporting VGA or MDA text mode, which use little - * endian byte ordering. - * In other cases, we can optimize by using native byte ordering and - * has already done the right job for us. - */ - -static inline void scr_writew(u16 val, volatile u16 *addr) -{ - st_le16(addr, val); -} - -static inline u16 scr_readw(volatile const u16 *addr) -{ - return ld_le16(addr); -} - -#define VT_BUF_HAVE_MEMCPYW -#define scr_memcpyw memcpy - -#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ - -extern unsigned long vgacon_remap_base; - -#ifdef __powerpc64__ -#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s)) -#else -#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) -#endif - -#define vga_readb(x) (*(x)) -#define vga_writeb(x,y) (*(y) = (x)) - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_VGA_H_ */ diff --git a/include/asm-powerpc/vio.h b/include/asm-powerpc/vio.h deleted file mode 100644 index 0a290a195946..000000000000 --- a/include/asm-powerpc/vio.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - * IBM PowerPC Virtual I/O Infrastructure Support. - * - * Copyright (c) 2003 IBM Corp. - * Dave Engebretsen engebret@us.ibm.com - * Santiago Leon santil@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_POWERPC_VIO_H -#define _ASM_POWERPC_VIO_H -#ifdef __KERNEL__ - -#include -#include -#include -#include -#include - -#include -#include - -/* - * Architecture-specific constants for drivers to - * extract attributes of the device using vio_get_attribute() - */ -#define VETH_MAC_ADDR "local-mac-address" -#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" - -/* End architecture-specific constants */ - -#define h_vio_signal(ua, mode) \ - plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) - -#define VIO_IRQ_DISABLE 0UL -#define VIO_IRQ_ENABLE 1UL - -/* - * VIO CMO minimum entitlement for all devices and spare entitlement - */ -#define VIO_CMO_MIN_ENT 1562624 - -struct iommu_table; - -/** - * vio_dev - This structure is used to describe virtual I/O devices. - * - * @desired: set from return of driver's get_desired_dma() function - * @entitled: bytes of IO data that has been reserved for this device. - * @allocated: bytes of IO data currently in use by the device. - * @allocs_failed: number of DMA failures due to insufficient entitlement. - */ -struct vio_dev { - const char *name; - const char *type; - uint32_t unit_address; - unsigned int irq; - struct { - size_t desired; - size_t entitled; - size_t allocated; - atomic_t allocs_failed; - } cmo; - struct device dev; -}; - -struct vio_driver { - const struct vio_device_id *id_table; - int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); - int (*remove)(struct vio_dev *dev); - /* A driver must have a get_desired_dma() function to - * be loaded in a CMO environment if it uses DMA. - */ - unsigned long (*get_desired_dma)(struct vio_dev *dev); - struct device_driver driver; -}; - -extern int vio_register_driver(struct vio_driver *drv); -extern void vio_unregister_driver(struct vio_driver *drv); - -extern int vio_cmo_entitlement_update(size_t); -extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); - -extern void __devinit vio_unregister_device(struct vio_dev *dev); - -struct device_node; - -extern struct vio_dev *vio_register_device_node( - struct device_node *node_vdev); -extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, - int *length); -#ifdef CONFIG_PPC_PSERIES -extern struct vio_dev *vio_find_node(struct device_node *vnode); -extern int vio_enable_interrupts(struct vio_dev *dev); -extern int vio_disable_interrupts(struct vio_dev *dev); -#else -static inline int vio_enable_interrupts(struct vio_dev *dev) -{ - return 0; -} -#endif - -static inline struct vio_driver *to_vio_driver(struct device_driver *drv) -{ - return container_of(drv, struct vio_driver, driver); -} - -static inline struct vio_dev *to_vio_dev(struct device *dev) -{ - return container_of(dev, struct vio_dev, dev); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_VIO_H */ diff --git a/include/asm-powerpc/xilinx_intc.h b/include/asm-powerpc/xilinx_intc.h deleted file mode 100644 index 343612f8fece..000000000000 --- a/include/asm-powerpc/xilinx_intc.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Xilinx intc external definitions - * - * Copyright 2007 Secret Lab Technologies Ltd. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _ASM_POWERPC_XILINX_INTC_H -#define _ASM_POWERPC_XILINX_INTC_H - -#ifdef __KERNEL__ - -extern void __init xilinx_intc_init_tree(void); -extern unsigned int xilinx_intc_get_irq(void); - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_XILINX_INTC_H */ diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h deleted file mode 100644 index 5eb8e599e5cc..000000000000 --- a/include/asm-powerpc/xmon.h +++ /dev/null @@ -1,33 +0,0 @@ -#ifndef __ASM_POWERPC_XMON_H -#define __ASM_POWERPC_XMON_H - -/* - * Copyrignt (C) 2006 IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __KERNEL__ - -#include - -#ifdef CONFIG_XMON -extern void xmon_setup(void); -extern void xmon_register_spus(struct list_head *list); -struct pt_regs; -extern int xmon(struct pt_regs *excp); -extern irqreturn_t xmon_irq(int, void *); -#else -static inline void xmon_setup(void) { }; -static inline void xmon_register_spus(struct list_head *list) { }; -#endif - -#if defined(CONFIG_XMON) && defined(CONFIG_SMP) -extern int cpus_are_in_xmon(void); -#endif - -#endif /* __KERNEL __ */ -#endif /* __ASM_POWERPC_XMON_H */ diff --git a/include/asm-powerpc/xor.h b/include/asm-powerpc/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/include/asm-powerpc/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3-59-g8ed1b