From a35bb4458e5e5c9dc19a0daa0629409285f3b25e Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Thu, 19 Nov 2015 14:17:06 +0100 Subject: scsi: report 'INQUIRY result too short' once per host Some host adapters (e.g. Hyper-V storvsc) are known for not respecting the SPC-2/3/4 requirement for 'INQUIRY data (see table ...) shall contain at least 36 bytes'. As a result we get tons on 'scsi 0:7:1:1: scsi scan: INQUIRY result too short (5), using 36' messages on console. This can be problematic for slow consoles. Introduce short_inquiry flag in struct Scsi_Host to print the message once per host. Signed-off-by: Vitaly Kuznetsov Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- include/scsi/scsi_host.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index e113c757d555..3a22da73d59a 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -673,6 +673,9 @@ struct Scsi_Host { unsigned use_blk_mq:1; unsigned use_cmd_list:1; + /* Host responded with short (<36 bytes) INQUIRY result */ + unsigned short_inquiry:1; + /* * Optional work queue to be utilized by the transport */ -- cgit v1.2.3-59-g8ed1b From ca369d51b3e1649be4a72addd6d6a168cfb3f537 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 13 Nov 2015 16:46:48 -0500 Subject: block/sd: Fix device-imposed transfer length limits Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig Tested-by: sweeneygj@gmx.com Tested-by: Arzeets Tested-by: David Eisner Tested-by: Mario Kicherer Signed-off-by: Martin K. Petersen --- block/blk-settings.c | 36 ++++++++++++++++-------------------- block/blk-sysfs.c | 3 +++ drivers/scsi/sd.c | 46 ++++++++++++++++++++++++++++++---------------- drivers/scsi/sd.h | 1 + include/linux/blkdev.h | 2 +- 5 files changed, 51 insertions(+), 37 deletions(-) (limited to 'include') diff --git a/block/blk-settings.c b/block/blk-settings.c index 7d8f129a1516..dd4973583978 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -91,7 +91,8 @@ void blk_set_default_limits(struct queue_limits *lim) lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; lim->virt_boundary_mask = 0; lim->max_segment_size = BLK_MAX_SEGMENT_SIZE; - lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS; + lim->max_sectors = lim->max_dev_sectors = lim->max_hw_sectors = + BLK_SAFE_MAX_SECTORS; lim->chunk_sectors = 0; lim->max_write_same_sectors = 0; lim->max_discard_sectors = 0; @@ -127,6 +128,7 @@ void blk_set_stacking_limits(struct queue_limits *lim) lim->max_hw_sectors = UINT_MAX; lim->max_segment_size = UINT_MAX; lim->max_sectors = UINT_MAX; + lim->max_dev_sectors = UINT_MAX; lim->max_write_same_sectors = UINT_MAX; } EXPORT_SYMBOL(blk_set_stacking_limits); @@ -214,8 +216,8 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 max_addr) EXPORT_SYMBOL(blk_queue_bounce_limit); /** - * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request - * @limits: the queue limits + * blk_queue_max_hw_sectors - set max sectors for a request for this queue + * @q: the request queue for the device * @max_hw_sectors: max hardware sectors in the usual 512b unit * * Description: @@ -224,13 +226,19 @@ EXPORT_SYMBOL(blk_queue_bounce_limit); * the device driver based upon the capabilities of the I/O * controller. * + * max_dev_sectors is a hard limit imposed by the storage device for + * READ/WRITE requests. It is set by the disk driver. + * * max_sectors is a soft limit imposed by the block layer for * filesystem type requests. This value can be overridden on a * per-device basis in /sys/block//queue/max_sectors_kb. * The soft limit can not exceed max_hw_sectors. **/ -void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors) +void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors) { + struct queue_limits *limits = &q->limits; + unsigned int max_sectors; + if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) { max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9); printk(KERN_INFO "%s: set to minimum %d\n", @@ -238,22 +246,9 @@ void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_ } limits->max_hw_sectors = max_hw_sectors; - limits->max_sectors = min_t(unsigned int, max_hw_sectors, - BLK_DEF_MAX_SECTORS); -} -EXPORT_SYMBOL(blk_limits_max_hw_sectors); - -/** - * blk_queue_max_hw_sectors - set max sectors for a request for this queue - * @q: the request queue for the device - * @max_hw_sectors: max hardware sectors in the usual 512b unit - * - * Description: - * See description for blk_limits_max_hw_sectors(). - **/ -void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors) -{ - blk_limits_max_hw_sectors(&q->limits, max_hw_sectors); + max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors); + max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS); + limits->max_sectors = max_sectors; } EXPORT_SYMBOL(blk_queue_max_hw_sectors); @@ -527,6 +522,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); + t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors); t->max_write_same_sectors = min(t->max_write_same_sectors, b->max_write_same_sectors); t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 3e44a9da2a13..55c637b9c42b 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -205,6 +205,9 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count) if (ret < 0) return ret; + max_hw_sectors_kb = min_not_zero(max_hw_sectors_kb, (unsigned long) + q->limits.max_dev_sectors >> 1); + if (max_sectors_kb > max_hw_sectors_kb || max_sectors_kb < page_kb) return -EINVAL; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e868d39c39bb..7af47ed10d90 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2238,11 +2238,8 @@ got_data: } } - if (sdkp->capacity > 0xffffffff) { + if (sdkp->capacity > 0xffffffff) sdp->use_16_for_rw = 1; - sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS; - } else - sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS; /* Rescale capacity to 512-byte units */ if (sector_size == 4096) @@ -2559,7 +2556,6 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) { unsigned int sector_sz = sdkp->device->sector_size; const int vpd_len = 64; - u32 max_xfer_length; unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL); if (!buffer || @@ -2567,14 +2563,11 @@ static void sd_read_block_limits(struct scsi_disk *sdkp) scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len)) goto out; - max_xfer_length = get_unaligned_be32(&buffer[8]); - if (max_xfer_length) - sdkp->max_xfer_blocks = max_xfer_length; - blk_queue_io_min(sdkp->disk->queue, get_unaligned_be16(&buffer[6]) * sector_sz); - blk_queue_io_opt(sdkp->disk->queue, - get_unaligned_be32(&buffer[12]) * sector_sz); + + sdkp->max_xfer_blocks = get_unaligned_be32(&buffer[8]); + sdkp->opt_xfer_blocks = get_unaligned_be32(&buffer[12]); if (buffer[3] == 0x3c) { unsigned int lba_count, desc_count; @@ -2723,6 +2716,11 @@ static int sd_try_extended_inquiry(struct scsi_device *sdp) return 0; } +static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks) +{ + return blocks << (ilog2(sdev->sector_size) - 9); +} + /** * sd_revalidate_disk - called the first time a new disk is seen, * performs disk spin up, read_capacity, etc. @@ -2732,8 +2730,9 @@ static int sd_revalidate_disk(struct gendisk *disk) { struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; + struct request_queue *q = sdkp->disk->queue; unsigned char *buffer; - unsigned int max_xfer; + unsigned int dev_max, rw_max; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_revalidate_disk\n")); @@ -2781,11 +2780,26 @@ static int sd_revalidate_disk(struct gendisk *disk) */ sd_set_flush_flag(sdkp); - max_xfer = sdkp->max_xfer_blocks; - max_xfer <<= ilog2(sdp->sector_size) - 9; + /* Initial block count limit based on CDB TRANSFER LENGTH field size. */ + dev_max = sdp->use_16_for_rw ? SD_MAX_XFER_BLOCKS : SD_DEF_XFER_BLOCKS; + + /* Some devices report a maximum block count for READ/WRITE requests. */ + dev_max = min_not_zero(dev_max, sdkp->max_xfer_blocks); + q->limits.max_dev_sectors = logical_to_sectors(sdp, dev_max); + + /* + * Use the device's preferred I/O size for reads and writes + * unless the reported value is unreasonably large (or garbage). + */ + if (sdkp->opt_xfer_blocks && sdkp->opt_xfer_blocks <= dev_max && + sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS) + rw_max = q->limits.io_opt = + logical_to_sectors(sdp, sdkp->opt_xfer_blocks); + else + rw_max = BLK_DEF_MAX_SECTORS; - sdkp->disk->queue->limits.max_sectors = - min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer); + /* Combine with controller limits */ + q->limits.max_sectors = min(rw_max, queue_max_hw_sectors(q)); set_capacity(disk, sdkp->capacity); sd_config_write_same(sdkp); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 63ba5ca7f9a1..5f2a84aff29f 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -67,6 +67,7 @@ struct scsi_disk { atomic_t openers; sector_t capacity; /* size in 512-byte sectors */ u32 max_xfer_blocks; + u32 opt_xfer_blocks; u32 max_ws_blocks; u32 max_unmap_blocks; u32 unmap_granularity; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 38a5ff772a37..9dacb745fa96 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -253,6 +253,7 @@ struct queue_limits { unsigned long virt_boundary_mask; unsigned int max_hw_sectors; + unsigned int max_dev_sectors; unsigned int chunk_sectors; unsigned int max_sectors; unsigned int max_segment_size; @@ -948,7 +949,6 @@ extern struct request_queue *blk_init_allocated_queue(struct request_queue *, extern void blk_cleanup_queue(struct request_queue *); extern void blk_queue_make_request(struct request_queue *, make_request_fn *); extern void blk_queue_bounce_limit(struct request_queue *, u64); -extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int); extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int); extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int); extern void blk_queue_max_segments(struct request_queue *, unsigned short); -- cgit v1.2.3-59-g8ed1b