From deb4de8b31bc5bf21efb6ac31150a01a631cd647 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 2 Aug 2017 15:00:40 -0700 Subject: seccomp: Provide matching filter for introspection Both the upcoming logging improvements and changes to RET_KILL will need to know which filter a given seccomp return value originated from. In order to delay logic processing of result until after the seccomp loop, this adds a single pointer assignment on matches. This will allow both log and RET_KILL logic to work off the filter rather than doing more expensive tests inside the time-critical run_filters loop. Running tight cycles of getpid() with filters attached shows no measurable difference in speed. Suggested-by: Tyler Hicks Signed-off-by: Kees Cook Reviewed-by: Tyler Hicks --- kernel/seccomp.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 98b59b5db90b..1f3347fc2605 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -171,10 +171,14 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) /** * seccomp_run_filters - evaluates all seccomp filters against @sd * @sd: optional seccomp data to be passed to filters + * @match: stores struct seccomp_filter that resulted in the return value, + * unless filter returned SECCOMP_RET_ALLOW, in which case it will + * be unchanged. * * Returns valid seccomp BPF response codes. */ -static u32 seccomp_run_filters(const struct seccomp_data *sd) +static u32 seccomp_run_filters(const struct seccomp_data *sd, + struct seccomp_filter **match) { struct seccomp_data sd_local; u32 ret = SECCOMP_RET_ALLOW; @@ -198,8 +202,10 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd) for (; f; f = f->prev) { u32 cur_ret = BPF_PROG_RUN(f->prog, sd); - if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) + if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) { ret = cur_ret; + *match = f; + } } return ret; } @@ -566,6 +572,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, const bool recheck_after_trace) { u32 filter_ret, action; + struct seccomp_filter *match = NULL; int data; /* @@ -574,7 +581,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, */ rmb(); - filter_ret = seccomp_run_filters(sd); + filter_ret = seccomp_run_filters(sd, &match); data = filter_ret & SECCOMP_RET_DATA; action = filter_ret & SECCOMP_RET_ACTION; @@ -638,6 +645,11 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; case SECCOMP_RET_ALLOW: + /* + * Note that the "match" filter will always be NULL for + * this action since SECCOMP_RET_ALLOW is the starting + * state in seccomp_run_filters(). + */ return 0; case SECCOMP_RET_KILL: -- cgit v1.3-14-g43fede From 8e5f1ad116df6b0de65eac458d5e7c318d1c05af Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:52 +0000 Subject: seccomp: Sysctl to display available actions This patch creates a read-only sysctl containing an ordered list of seccomp actions that the kernel supports. The ordering, from left to right, is the lowest action value (kill) to the highest action value (allow). Currently, a read of the sysctl file would return "kill trap errno trace allow". The contents of this sysctl file can be useful for userspace code as well as the system administrator. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_avail libseccomp and other userspace code can easily determine which actions the current kernel supports. The set of actions supported by the current kernel may be different than the set of action macros found in kernel headers that were installed where the userspace code was built. In addition, this sysctl will allow system administrators to know which actions are supported by the kernel and make it easier to configure exactly what seccomp logs through the audit subsystem. Support for this level of logging configuration will come in a future patch. Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- Documentation/sysctl/kernel.txt | 1 + Documentation/userspace-api/seccomp_filter.rst | 16 ++++++++ kernel/seccomp.c | 51 ++++++++++++++++++++++++++ 3 files changed, 68 insertions(+) (limited to 'kernel') diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index bac23c198360..995c42cf86ba 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -74,6 +74,7 @@ show up in /proc/sys/kernel: - reboot-cmd [ SPARC only ] - rtsig-max - rtsig-nr +- seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst - sem - sem_next_id [ sysv ipc ] - sg-big-buff [ generic SCSI device (sg) ] diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index f71eb5ef1f2d..35fc7cbf1d95 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -169,7 +169,23 @@ The ``samples/seccomp/`` directory contains both an x86-specific example and a more generic example of a higher level macro interface for BPF program generation. +Sysctls +======= + +Seccomp's sysctl files can be found in the ``/proc/sys/kernel/seccomp/`` +directory. Here's a description of each file in that directory: + +``actions_avail``: + A read-only ordered list of seccomp return values (refer to the + ``SECCOMP_RET_*`` macros above) in string form. The ordering, from + left-to-right, is the least permissive return value to the most + permissive return value. + The list represents the set of seccomp return values supported + by the kernel. A userspace program may use this list to + determine if the actions found in the ``seccomp.h``, when the + program was built, differs from the set of actions actually + supported in the current running kernel. Adding architecture support =========================== diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 1f3347fc2605..5f19f41e4e50 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -17,11 +17,13 @@ #include #include #include +#include #include #include #include #include #include +#include #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER #include @@ -934,3 +936,52 @@ out: return ret; } #endif + +#ifdef CONFIG_SYSCTL + +/* Human readable action names for friendly sysctl interaction */ +#define SECCOMP_RET_KILL_NAME "kill" +#define SECCOMP_RET_TRAP_NAME "trap" +#define SECCOMP_RET_ERRNO_NAME "errno" +#define SECCOMP_RET_TRACE_NAME "trace" +#define SECCOMP_RET_ALLOW_NAME "allow" + +static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " + SECCOMP_RET_TRAP_NAME " " + SECCOMP_RET_ERRNO_NAME " " + SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_ALLOW_NAME; + +static struct ctl_path seccomp_sysctl_path[] = { + { .procname = "kernel", }, + { .procname = "seccomp", }, + { } +}; + +static struct ctl_table seccomp_sysctl_table[] = { + { + .procname = "actions_avail", + .data = (void *) &seccomp_actions_avail, + .maxlen = sizeof(seccomp_actions_avail), + .mode = 0444, + .proc_handler = proc_dostring, + }, + { } +}; + +static int __init seccomp_sysctl_init(void) +{ + struct ctl_table_header *hdr; + + hdr = register_sysctl_paths(seccomp_sysctl_path, seccomp_sysctl_table); + if (!hdr) + pr_warn("seccomp: sysctl registration failed\n"); + else + kmemleak_not_leak(hdr); + + return 0; +} + +device_initcall(seccomp_sysctl_init) + +#endif /* CONFIG_SYSCTL */ -- cgit v1.3-14-g43fede From d612b1fd8010d0d67b5287fe146b8b55bcbb8655 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:53 +0000 Subject: seccomp: Operation for checking if an action is available Userspace code that needs to check if the kernel supports a given action may not be able to use the /proc/sys/kernel/seccomp/actions_avail sysctl. The process may be running in a sandbox and, therefore, sufficient filesystem access may not be available. This patch adds an operation to the seccomp(2) syscall that allows userspace code to ask the kernel if a given action is available. If the action is supported by the kernel, 0 is returned. If the action is not supported by the kernel, -1 is returned with errno set to -EOPNOTSUPP. If this check is attempted on a kernel that doesn't support this new operation, -1 is returned with errno set to -EINVAL meaning that userspace code will have the ability to differentiate between the two error cases. Signed-off-by: Tyler Hicks Suggested-by: Andy Lutomirski Signed-off-by: Kees Cook --- include/uapi/linux/seccomp.h | 5 ++-- kernel/seccomp.c | 26 +++++++++++++++++++ tools/testing/selftests/seccomp/seccomp_bpf.c | 36 +++++++++++++++++++++++++++ 3 files changed, 65 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index 0f238a43ff1e..aaad61cc46bc 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -11,8 +11,9 @@ #define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */ /* Valid operations for seccomp syscall. */ -#define SECCOMP_SET_MODE_STRICT 0 -#define SECCOMP_SET_MODE_FILTER 1 +#define SECCOMP_SET_MODE_STRICT 0 +#define SECCOMP_SET_MODE_FILTER 1 +#define SECCOMP_GET_ACTION_AVAIL 2 /* Valid flags for SECCOMP_SET_MODE_FILTER */ #define SECCOMP_FILTER_FLAG_TSYNC 1 diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 5f19f41e4e50..7a6089f66fed 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -808,6 +808,27 @@ static inline long seccomp_set_mode_filter(unsigned int flags, } #endif +static long seccomp_get_action_avail(const char __user *uaction) +{ + u32 action; + + if (copy_from_user(&action, uaction, sizeof(action))) + return -EFAULT; + + switch (action) { + case SECCOMP_RET_KILL: + case SECCOMP_RET_TRAP: + case SECCOMP_RET_ERRNO: + case SECCOMP_RET_TRACE: + case SECCOMP_RET_ALLOW: + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + /* Common entry point for both prctl and syscall. */ static long do_seccomp(unsigned int op, unsigned int flags, const char __user *uargs) @@ -819,6 +840,11 @@ static long do_seccomp(unsigned int op, unsigned int flags, return seccomp_set_mode_strict(); case SECCOMP_SET_MODE_FILTER: return seccomp_set_mode_filter(flags, uargs); + case SECCOMP_GET_ACTION_AVAIL: + if (flags != 0) + return -EINVAL; + + return seccomp_get_action_avail(uargs); default: return -EINVAL; } diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 2fb49d99588d..1f2888f6678b 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -1731,6 +1731,10 @@ TEST_F_SIGNAL(TRACE_syscall, kill_after_ptrace, SIGSYS) #define SECCOMP_SET_MODE_FILTER 1 #endif +#ifndef SECCOMP_GET_ACTION_AVAIL +#define SECCOMP_GET_ACTION_AVAIL 2 +#endif + #ifndef SECCOMP_FILTER_FLAG_TSYNC #define SECCOMP_FILTER_FLAG_TSYNC 1 #endif @@ -2469,6 +2473,38 @@ TEST(syscall_restart) _metadata->passed = 0; } +TEST(get_action_avail) +{ + __u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP, + SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE, + SECCOMP_RET_ALLOW }; + __u32 unknown_action = 0x10000000U; + int i; + long ret; + + ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &actions[0]); + ASSERT_NE(ENOSYS, errno) { + TH_LOG("Kernel does not support seccomp syscall!"); + } + ASSERT_NE(EINVAL, errno) { + TH_LOG("Kernel does not support SECCOMP_GET_ACTION_AVAIL operation!"); + } + EXPECT_EQ(ret, 0); + + for (i = 0; i < ARRAY_SIZE(actions); i++) { + ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &actions[i]); + EXPECT_EQ(ret, 0) { + TH_LOG("Expected action (0x%X) not available!", + actions[i]); + } + } + + /* Check that an unknown action is handled properly (EOPNOTSUPP) */ + ret = seccomp(SECCOMP_GET_ACTION_AVAIL, 0, &unknown_action); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EOPNOTSUPP); +} + /* * TODO: * - add microbenchmarks -- cgit v1.3-14-g43fede From 0ddec0fc8900201c0897b87b762b7c420436662f Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:54 +0000 Subject: seccomp: Sysctl to configure actions that are allowed to be logged Adminstrators can write to this sysctl to set the seccomp actions that are allowed to be logged. Any actions not found in this sysctl will not be logged. For example, all SECCOMP_RET_KILL, SECCOMP_RET_TRAP, and SECCOMP_RET_ERRNO actions would be loggable if "kill trap errno" were written to the sysctl. SECCOMP_RET_TRACE actions would not be logged since its string representation ("trace") wasn't present in the sysctl value. The path to the sysctl is: /proc/sys/kernel/seccomp/actions_logged The actions_avail sysctl can be read to discover the valid action names that can be written to the actions_logged sysctl with the exception of "allow". SECCOMP_RET_ALLOW actions cannot be configured for logging. The default setting for the sysctl is to allow all actions to be logged except SECCOMP_RET_ALLOW. While only SECCOMP_RET_KILL actions are currently logged, an upcoming patch will allow applications to request additional actions to be logged. There's one important exception to this sysctl. If a task is specifically being audited, meaning that an audit context has been allocated for the task, seccomp will log all actions other than SECCOMP_RET_ALLOW despite the value of actions_logged. This exception preserves the existing auditing behavior of tasks with an allocated audit context. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if audit_enabled && task-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- Documentation/userspace-api/seccomp_filter.rst | 18 +++ include/linux/audit.h | 6 +- kernel/seccomp.c | 171 ++++++++++++++++++++++++- 3 files changed, 187 insertions(+), 8 deletions(-) (limited to 'kernel') diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index 35fc7cbf1d95..2d1d8ab04ac5 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -187,6 +187,24 @@ directory. Here's a description of each file in that directory: program was built, differs from the set of actions actually supported in the current running kernel. +``actions_logged``: + A read-write ordered list of seccomp return values (refer to the + ``SECCOMP_RET_*`` macros above) that are allowed to be logged. Writes + to the file do not need to be in ordered form but reads from the file + will be ordered in the same way as the actions_avail sysctl. + + It is important to note that the value of ``actions_logged`` does not + prevent certain actions from being logged when the audit subsystem is + configured to audit a task. If the action is not found in + ``actions_logged`` list, the final decision on whether to audit the + action for that task is ultimately left up to the audit subsystem to + decide for all seccomp return values other than ``SECCOMP_RET_ALLOW``. + + The ``allow`` string is not accepted in the ``actions_logged`` sysctl + as it is not possible to log ``SECCOMP_RET_ALLOW`` actions. Attempting + to write ``allow`` to the sysctl will result in an EINVAL being + returned. + Adding architecture support =========================== diff --git a/include/linux/audit.h b/include/linux/audit.h index 2150bdccfbab..8c30f06d639d 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -314,11 +314,7 @@ void audit_core_dumps(long signr); static inline void audit_seccomp(unsigned long syscall, long signr, int code) { - if (!audit_enabled) - return; - - /* Force a record to be reported if a signal was delivered. */ - if (signr || unlikely(!audit_dummy_context())) + if (audit_enabled && unlikely(!audit_dummy_context())) __audit_seccomp(syscall, signr, code); } diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 7a6089f66fed..54357e361aea 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -522,6 +522,45 @@ static void seccomp_send_sigsys(int syscall, int reason) } #endif /* CONFIG_SECCOMP_FILTER */ +/* For use with seccomp_actions_logged */ +#define SECCOMP_LOG_KILL (1 << 0) +#define SECCOMP_LOG_TRAP (1 << 2) +#define SECCOMP_LOG_ERRNO (1 << 3) +#define SECCOMP_LOG_TRACE (1 << 4) +#define SECCOMP_LOG_ALLOW (1 << 5) + +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | + SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; + +static inline void seccomp_log(unsigned long syscall, long signr, u32 action) +{ + bool log = false; + + switch (action) { + case SECCOMP_RET_ALLOW: + case SECCOMP_RET_TRAP: + case SECCOMP_RET_ERRNO: + case SECCOMP_RET_TRACE: + break; + case SECCOMP_RET_KILL: + default: + log = seccomp_actions_logged & SECCOMP_LOG_KILL; + } + + /* + * Force an audit message to be emitted when the action is RET_KILL and + * the action is allowed to be logged by the admin. + */ + if (log) + return __audit_seccomp(syscall, signr, action); + + /* + * Let the audit subsystem decide if the action should be audited based + * on whether the current task itself is being audited. + */ + return audit_seccomp(syscall, signr, action); +} + /* * Secure computing mode 1 allows only read/write/exit/sigreturn. * To be fully secure this must be combined with rlimit @@ -547,7 +586,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - audit_seccomp(this_syscall, SIGKILL, SECCOMP_RET_KILL); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL); do_exit(SIGKILL); } @@ -656,7 +695,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, case SECCOMP_RET_KILL: default: - audit_seccomp(this_syscall, SIGSYS, action); + seccomp_log(this_syscall, SIGSYS, action); /* Dump core only if this is the last remaining thread. */ if (get_nr_threads(current) == 1) { siginfo_t info; @@ -673,7 +712,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, unreachable(); skip: - audit_seccomp(this_syscall, 0, action); + seccomp_log(this_syscall, 0, action); return -1; } #else @@ -978,6 +1017,127 @@ static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " SECCOMP_RET_TRACE_NAME " " SECCOMP_RET_ALLOW_NAME; +struct seccomp_log_name { + u32 log; + const char *name; +}; + +static const struct seccomp_log_name seccomp_log_names[] = { + { SECCOMP_LOG_KILL, SECCOMP_RET_KILL_NAME }, + { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, + { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, + { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, + { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME }, + { } +}; + +static bool seccomp_names_from_actions_logged(char *names, size_t size, + u32 actions_logged) +{ + const struct seccomp_log_name *cur; + bool append_space = false; + + for (cur = seccomp_log_names; cur->name && size; cur++) { + ssize_t ret; + + if (!(actions_logged & cur->log)) + continue; + + if (append_space) { + ret = strscpy(names, " ", size); + if (ret < 0) + return false; + + names += ret; + size -= ret; + } else + append_space = true; + + ret = strscpy(names, cur->name, size); + if (ret < 0) + return false; + + names += ret; + size -= ret; + } + + return true; +} + +static bool seccomp_action_logged_from_name(u32 *action_logged, + const char *name) +{ + const struct seccomp_log_name *cur; + + for (cur = seccomp_log_names; cur->name; cur++) { + if (!strcmp(cur->name, name)) { + *action_logged = cur->log; + return true; + } + } + + return false; +} + +static bool seccomp_actions_logged_from_names(u32 *actions_logged, char *names) +{ + char *name; + + *actions_logged = 0; + while ((name = strsep(&names, " ")) && *name) { + u32 action_logged = 0; + + if (!seccomp_action_logged_from_name(&action_logged, name)) + return false; + + *actions_logged |= action_logged; + } + + return true; +} + +static int seccomp_actions_logged_handler(struct ctl_table *ro_table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + char names[sizeof(seccomp_actions_avail)]; + struct ctl_table table; + int ret; + + if (write && !capable(CAP_SYS_ADMIN)) + return -EPERM; + + memset(names, 0, sizeof(names)); + + if (!write) { + if (!seccomp_names_from_actions_logged(names, sizeof(names), + seccomp_actions_logged)) + return -EINVAL; + } + + table = *ro_table; + table.data = names; + table.maxlen = sizeof(names); + ret = proc_dostring(&table, write, buffer, lenp, ppos); + if (ret) + return ret; + + if (write) { + u32 actions_logged; + + if (!seccomp_actions_logged_from_names(&actions_logged, + table.data)) + return -EINVAL; + + if (actions_logged & SECCOMP_LOG_ALLOW) + return -EINVAL; + + seccomp_actions_logged = actions_logged; + } + + return 0; +} + static struct ctl_path seccomp_sysctl_path[] = { { .procname = "kernel", }, { .procname = "seccomp", }, @@ -992,6 +1152,11 @@ static struct ctl_table seccomp_sysctl_table[] = { .mode = 0444, .proc_handler = proc_dostring, }, + { + .procname = "actions_logged", + .mode = 0644, + .proc_handler = seccomp_actions_logged_handler, + }, { } }; -- cgit v1.3-14-g43fede From e66a39977985b1e69e17c4042cb290768eca9b02 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:56 +0000 Subject: seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for all actions except for SECCOMP_RET_ALLOW for the given filter. SECCOMP_RET_KILL actions are always logged, when "kill" is in the actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged, regardless of this flag. This flag can be used to create noisy filters that result in all non-allowed actions to be logged. A process may have one noisy filter, which is loaded with this flag, as well as a quiet filter that's not loaded with this flag. This allows for the actions in a set of filters to be selectively conveyed to the admin. Since a system could have a large number of allocated seccomp_filter structs, struct packing was taken in consideration. On 64 bit x86, the new log member takes up one byte of an existing four byte hole in the struct. On 32 bit x86, the new log member creates a new four byte hole (unavoidable) and consumes one of those bytes. Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not capable of inspecting the audit log to verify that the actions taken in the filter were logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- include/linux/seccomp.h | 3 +- include/uapi/linux/seccomp.h | 1 + kernel/seccomp.c | 26 +++++++--- tools/testing/selftests/seccomp/seccomp_bpf.c | 69 ++++++++++++++++++++++++++- 4 files changed, 91 insertions(+), 8 deletions(-) (limited to 'kernel') diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index ecc296c137cd..c8bef436b61d 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -3,7 +3,8 @@ #include -#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC) +#define SECCOMP_FILTER_FLAG_MASK (SECCOMP_FILTER_FLAG_TSYNC | \ + SECCOMP_FILTER_FLAG_LOG) #ifdef CONFIG_SECCOMP diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index aaad61cc46bc..19a611d0712e 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -17,6 +17,7 @@ /* Valid flags for SECCOMP_SET_MODE_FILTER */ #define SECCOMP_FILTER_FLAG_TSYNC 1 +#define SECCOMP_FILTER_FLAG_LOG 2 /* * All BPF programs must return a 32-bit value. diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 54357e361aea..ed9fde418fc4 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -44,6 +44,7 @@ * get/put helpers should be used when accessing an instance * outside of a lifetime-guarded section. In general, this * is only needed for handling filters shared across tasks. + * @log: true if all actions except for SECCOMP_RET_ALLOW should be logged * @prev: points to a previously installed, or inherited, filter * @prog: the BPF program to evaluate * @@ -59,6 +60,7 @@ */ struct seccomp_filter { refcount_t usage; + bool log; struct seccomp_filter *prev; struct bpf_prog *prog; }; @@ -452,6 +454,10 @@ static long seccomp_attach_filter(unsigned int flags, return ret; } + /* Set log flag, if present. */ + if (flags & SECCOMP_FILTER_FLAG_LOG) + filter->log = true; + /* * If there is an existing filter, make it the prev and don't drop its * task reference. @@ -532,15 +538,22 @@ static void seccomp_send_sigsys(int syscall, int reason) static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; -static inline void seccomp_log(unsigned long syscall, long signr, u32 action) +static inline void seccomp_log(unsigned long syscall, long signr, u32 action, + bool requested) { bool log = false; switch (action) { case SECCOMP_RET_ALLOW: + break; case SECCOMP_RET_TRAP: + log = requested && seccomp_actions_logged & SECCOMP_LOG_TRAP; + break; case SECCOMP_RET_ERRNO: + log = requested && seccomp_actions_logged & SECCOMP_LOG_ERRNO; + break; case SECCOMP_RET_TRACE: + log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE; break; case SECCOMP_RET_KILL: default: @@ -548,8 +561,9 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action) } /* - * Force an audit message to be emitted when the action is RET_KILL and - * the action is allowed to be logged by the admin. + * Force an audit message to be emitted when the action is RET_KILL or + * the FILTER_FLAG_LOG bit was set and the action is allowed to be + * logged by the admin. */ if (log) return __audit_seccomp(syscall, signr, action); @@ -586,7 +600,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true); do_exit(SIGKILL); } @@ -695,7 +709,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, case SECCOMP_RET_KILL: default: - seccomp_log(this_syscall, SIGSYS, action); + seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ if (get_nr_threads(current) == 1) { siginfo_t info; @@ -712,7 +726,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, unreachable(); skip: - seccomp_log(this_syscall, 0, action); + seccomp_log(this_syscall, 0, action, match ? match->log : false); return -1; } #else diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index abf708e09892..1c8c22ce7740 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -1739,6 +1739,10 @@ TEST_F_SIGNAL(TRACE_syscall, kill_after_ptrace, SIGSYS) #define SECCOMP_FILTER_FLAG_TSYNC 1 #endif +#ifndef SECCOMP_FILTER_FLAG_LOG +#define SECCOMP_FILTER_FLAG_LOG 2 +#endif + #ifndef seccomp int seccomp(unsigned int op, unsigned int flags, void *args) { @@ -1844,7 +1848,8 @@ TEST(seccomp_syscall_mode_lock) */ TEST(detect_seccomp_filter_flags) { - unsigned int flags[] = { SECCOMP_FILTER_FLAG_TSYNC }; + unsigned int flags[] = { SECCOMP_FILTER_FLAG_TSYNC, + SECCOMP_FILTER_FLAG_LOG }; unsigned int flag, all_flags; int i; long ret; @@ -2533,6 +2538,67 @@ TEST(syscall_restart) _metadata->passed = 0; } +TEST_SIGNAL(filter_flag_log, SIGSYS) +{ + struct sock_filter allow_filter[] = { + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), + }; + struct sock_filter kill_filter[] = { + BPF_STMT(BPF_LD|BPF_W|BPF_ABS, + offsetof(struct seccomp_data, nr)), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_getpid, 0, 1), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_KILL), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), + }; + struct sock_fprog allow_prog = { + .len = (unsigned short)ARRAY_SIZE(allow_filter), + .filter = allow_filter, + }; + struct sock_fprog kill_prog = { + .len = (unsigned short)ARRAY_SIZE(kill_filter), + .filter = kill_filter, + }; + long ret; + pid_t parent = getppid(); + + ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); + ASSERT_EQ(0, ret); + + /* Verify that the FILTER_FLAG_LOG flag isn't accepted in strict mode */ + ret = seccomp(SECCOMP_SET_MODE_STRICT, SECCOMP_FILTER_FLAG_LOG, + &allow_prog); + ASSERT_NE(ENOSYS, errno) { + TH_LOG("Kernel does not support seccomp syscall!"); + } + EXPECT_NE(0, ret) { + TH_LOG("Kernel accepted FILTER_FLAG_LOG flag in strict mode!"); + } + EXPECT_EQ(EINVAL, errno) { + TH_LOG("Kernel returned unexpected errno for FILTER_FLAG_LOG flag in strict mode!"); + } + + /* Verify that a simple, permissive filter can be added with no flags */ + ret = seccomp(SECCOMP_SET_MODE_FILTER, 0, &allow_prog); + EXPECT_EQ(0, ret); + + /* See if the same filter can be added with the FILTER_FLAG_LOG flag */ + ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG, + &allow_prog); + ASSERT_NE(EINVAL, errno) { + TH_LOG("Kernel does not support the FILTER_FLAG_LOG flag!"); + } + EXPECT_EQ(0, ret); + + /* Ensure that the kill filter works with the FILTER_FLAG_LOG flag */ + ret = seccomp(SECCOMP_SET_MODE_FILTER, SECCOMP_FILTER_FLAG_LOG, + &kill_prog); + EXPECT_EQ(0, ret); + + EXPECT_EQ(parent, syscall(__NR_getppid)); + /* getpid() should never return. */ + EXPECT_EQ(0, syscall(__NR_getpid)); +} + TEST(get_action_avail) { __u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP, @@ -2573,6 +2639,7 @@ TEST(get_action_avail) * - endianness checking when appropriate * - 64-bit arg prodding * - arch value testing (x86 modes especially) + * - verify that FILTER_FLAG_LOG filters generate log messages * - ... */ -- cgit v1.3-14-g43fede From 59f5cf44a38284eb9e76270c786fb6cc62ef8ac4 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 11 Aug 2017 04:33:57 +0000 Subject: seccomp: Action to log before allowing Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing the syscall. At the implementation level, this action is identical to the existing SECCOMP_RET_ALLOW action. However, it can be very useful when initially developing a seccomp filter for an application. The developer can set the default action to be SECCOMP_RET_LOG, maybe mark any obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the application through its paces. A list of syscalls that triggered the default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and that list can be used to build the syscall whitelist. Finally, the developer can change the default action to the desired value. This provides a more friendly experience than seeing the application get killed, then updating the filter and rebuilding the app, seeing the application get killed due to a different syscall, then updating the filter and rebuilding the app, etc. The functionality is similar to what's supported by the various LSMs. SELinux has permissive mode, AppArmor has complain mode, SMACK has bring-up mode, etc. SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow while logging is slightly more restrictive than quietly allowing. Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of inspecting the audit log to verify that the syscall was logged. With this patch, the logic for deciding if an action will be logged is: if action == RET_ALLOW: do not log else if action == RET_KILL && RET_KILL in actions_logged: log else if action == RET_LOG && RET_LOG in actions_logged: log else if filter-requests-logging && action in actions_logged: log else if audit_enabled && process-is-being-audited: log else: do not log Signed-off-by: Tyler Hicks Signed-off-by: Kees Cook --- Documentation/userspace-api/seccomp_filter.rst | 9 +++ include/uapi/linux/seccomp.h | 1 + kernel/seccomp.c | 23 ++++-- tools/testing/selftests/seccomp/seccomp_bpf.c | 98 +++++++++++++++++++++++++- 4 files changed, 125 insertions(+), 6 deletions(-) (limited to 'kernel') diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index 2d1d8ab04ac5..f4977357daf2 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -141,6 +141,15 @@ In precedence order, they are: allow use of ptrace, even of other sandboxed processes, without extreme care; ptracers can use this mechanism to escape.) +``SECCOMP_RET_LOG``: + Results in the system call being executed after it is logged. This + should be used by application developers to learn which syscalls their + application needs without having to iterate through multiple test and + development cycles to build the list. + + This action will only be logged if "log" is present in the + actions_logged sysctl string. + ``SECCOMP_RET_ALLOW``: Results in the system call being executed. diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index 19a611d0712e..f94433263e4b 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -31,6 +31,7 @@ #define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ #define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ #define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ #define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ /* Masks for the return value sections. */ diff --git a/kernel/seccomp.c b/kernel/seccomp.c index ed9fde418fc4..59cde2ed3b92 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -533,10 +533,12 @@ static void seccomp_send_sigsys(int syscall, int reason) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) -#define SECCOMP_LOG_ALLOW (1 << 5) +#define SECCOMP_LOG_LOG (1 << 5) +#define SECCOMP_LOG_ALLOW (1 << 6) static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | - SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE; + SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | + SECCOMP_LOG_LOG; static inline void seccomp_log(unsigned long syscall, long signr, u32 action, bool requested) @@ -555,15 +557,18 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, case SECCOMP_RET_TRACE: log = requested && seccomp_actions_logged & SECCOMP_LOG_TRACE; break; + case SECCOMP_RET_LOG: + log = seccomp_actions_logged & SECCOMP_LOG_LOG; + break; case SECCOMP_RET_KILL: default: log = seccomp_actions_logged & SECCOMP_LOG_KILL; } /* - * Force an audit message to be emitted when the action is RET_KILL or - * the FILTER_FLAG_LOG bit was set and the action is allowed to be - * logged by the admin. + * Force an audit message to be emitted when the action is RET_KILL, + * RET_LOG, or the FILTER_FLAG_LOG bit was set and the action is + * allowed to be logged by the admin. */ if (log) return __audit_seccomp(syscall, signr, action); @@ -699,6 +704,10 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; + case SECCOMP_RET_LOG: + seccomp_log(this_syscall, 0, action, true); + return 0; + case SECCOMP_RET_ALLOW: /* * Note that the "match" filter will always be NULL for @@ -873,6 +882,7 @@ static long seccomp_get_action_avail(const char __user *uaction) case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: case SECCOMP_RET_TRACE: + case SECCOMP_RET_LOG: case SECCOMP_RET_ALLOW: break; default: @@ -1023,12 +1033,14 @@ out: #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" #define SECCOMP_RET_TRACE_NAME "trace" +#define SECCOMP_RET_LOG_NAME "log" #define SECCOMP_RET_ALLOW_NAME "allow" static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " SECCOMP_RET_TRAP_NAME " " SECCOMP_RET_ERRNO_NAME " " SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_LOG_NAME " " SECCOMP_RET_ALLOW_NAME; struct seccomp_log_name { @@ -1041,6 +1053,7 @@ static const struct seccomp_log_name seccomp_log_names[] = { { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, + { SECCOMP_LOG_LOG, SECCOMP_RET_LOG_NAME }, { SECCOMP_LOG_ALLOW, SECCOMP_RET_ALLOW_NAME }, { } }; diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 1c8c22ce7740..7372958eccb5 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -74,7 +74,12 @@ #define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ #define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ #define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ +#endif +#ifndef SECCOMP_RET_LOG +#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ +#endif +#ifndef SECCOMP_RET_ACTION /* Masks for the return value sections. */ #define SECCOMP_RET_ACTION 0x7fff0000U #define SECCOMP_RET_DATA 0x0000ffffU @@ -342,6 +347,28 @@ TEST(empty_prog) EXPECT_EQ(EINVAL, errno); } +TEST(log_all) +{ + struct sock_filter filter[] = { + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_LOG), + }; + struct sock_fprog prog = { + .len = (unsigned short)ARRAY_SIZE(filter), + .filter = filter, + }; + long ret; + pid_t parent = getppid(); + + ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); + ASSERT_EQ(0, ret); + + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &prog); + ASSERT_EQ(0, ret); + + /* getppid() should succeed and be logged (no check for logging) */ + EXPECT_EQ(parent, syscall(__NR_getppid)); +} + TEST_SIGNAL(unknown_ret_is_kill_inside, SIGSYS) { struct sock_filter filter[] = { @@ -756,6 +783,7 @@ TEST_F(TRAP, handler) FIXTURE_DATA(precedence) { struct sock_fprog allow; + struct sock_fprog log; struct sock_fprog trace; struct sock_fprog error; struct sock_fprog trap; @@ -767,6 +795,13 @@ FIXTURE_SETUP(precedence) struct sock_filter allow_insns[] = { BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), }; + struct sock_filter log_insns[] = { + BPF_STMT(BPF_LD|BPF_W|BPF_ABS, + offsetof(struct seccomp_data, nr)), + BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, __NR_getpid, 1, 0), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_ALLOW), + BPF_STMT(BPF_RET|BPF_K, SECCOMP_RET_LOG), + }; struct sock_filter trace_insns[] = { BPF_STMT(BPF_LD|BPF_W|BPF_ABS, offsetof(struct seccomp_data, nr)), @@ -803,6 +838,7 @@ FIXTURE_SETUP(precedence) memcpy(self->_x.filter, &_x##_insns, sizeof(_x##_insns)); \ self->_x.len = (unsigned short)ARRAY_SIZE(_x##_insns) FILTER_ALLOC(allow); + FILTER_ALLOC(log); FILTER_ALLOC(trace); FILTER_ALLOC(error); FILTER_ALLOC(trap); @@ -813,6 +849,7 @@ FIXTURE_TEARDOWN(precedence) { #define FILTER_FREE(_x) if (self->_x.filter) free(self->_x.filter) FILTER_FREE(allow); + FILTER_FREE(log); FILTER_FREE(trace); FILTER_FREE(error); FILTER_FREE(trap); @@ -830,6 +867,8 @@ TEST_F(precedence, allow_ok) ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); @@ -854,6 +893,8 @@ TEST_F_SIGNAL(precedence, kill_is_highest, SIGSYS) ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); @@ -885,6 +926,8 @@ TEST_F_SIGNAL(precedence, kill_is_highest_in_any_order, SIGSYS) ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trap); @@ -906,6 +949,8 @@ TEST_F_SIGNAL(precedence, trap_is_second, SIGSYS) ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); @@ -931,6 +976,8 @@ TEST_F_SIGNAL(precedence, trap_is_second_in_any_order, SIGSYS) ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trap); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); @@ -952,6 +999,8 @@ TEST_F(precedence, errno_is_third) ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); @@ -970,6 +1019,8 @@ TEST_F(precedence, errno_is_third_in_any_order) ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->error); ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); @@ -992,6 +1043,8 @@ TEST_F(precedence, trace_is_fourth) ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->trace); ASSERT_EQ(0, ret); /* Should work just fine. */ @@ -1013,12 +1066,54 @@ TEST_F(precedence, trace_is_fourth_in_any_order) ASSERT_EQ(0, ret); ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); /* Should work just fine. */ EXPECT_EQ(parent, syscall(__NR_getppid)); /* No ptracer */ EXPECT_EQ(-1, syscall(__NR_getpid)); } +TEST_F(precedence, log_is_fifth) +{ + pid_t mypid, parent; + long ret; + + mypid = getpid(); + parent = getppid(); + ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); + ASSERT_EQ(0, ret); + + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); + ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); + /* Should work just fine. */ + EXPECT_EQ(parent, syscall(__NR_getppid)); + /* Should also work just fine */ + EXPECT_EQ(mypid, syscall(__NR_getpid)); +} + +TEST_F(precedence, log_is_fifth_in_any_order) +{ + pid_t mypid, parent; + long ret; + + mypid = getpid(); + parent = getppid(); + ret = prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); + ASSERT_EQ(0, ret); + + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->log); + ASSERT_EQ(0, ret); + ret = prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &self->allow); + ASSERT_EQ(0, ret); + /* Should work just fine. */ + EXPECT_EQ(parent, syscall(__NR_getppid)); + /* Should also work just fine */ + EXPECT_EQ(mypid, syscall(__NR_getpid)); +} + #ifndef PTRACE_O_TRACESECCOMP #define PTRACE_O_TRACESECCOMP 0x00000080 #endif @@ -2603,7 +2698,7 @@ TEST(get_action_avail) { __u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP, SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE, - SECCOMP_RET_ALLOW }; + SECCOMP_RET_LOG, SECCOMP_RET_ALLOW }; __u32 unknown_action = 0x10000000U; int i; long ret; @@ -2640,6 +2735,7 @@ TEST(get_action_avail) * - 64-bit arg prodding * - arch value testing (x86 modes especially) * - verify that FILTER_FLAG_LOG filters generate log messages + * - verify that RET_LOG generates log messages * - ... */ -- cgit v1.3-14-g43fede From fd76875ca289a3d4722f266fd2d5532a27083903 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 12:53:18 -0700 Subject: seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL to the more accurate SECCOMP_RET_KILL_THREAD. The existing selftest values are intentionally left as SECCOMP_RET_KILL just to be sure we're exercising the alias. Signed-off-by: Kees Cook --- Documentation/networking/filter.txt | 2 +- Documentation/userspace-api/seccomp_filter.rst | 4 +-- include/uapi/linux/seccomp.h | 3 +- kernel/seccomp.c | 39 ++++++++++++++------------ samples/seccomp/bpf-direct.c | 4 +-- samples/seccomp/bpf-helper.h | 2 +- tools/testing/selftests/seccomp/seccomp_bpf.c | 17 ++++++----- 7 files changed, 39 insertions(+), 32 deletions(-) (limited to 'kernel') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index b69b205501de..73aa0f12156d 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -337,7 +337,7 @@ Examples for low-level BPF: jeq #14, good /* __NR_rt_sigprocmask */ jeq #13, good /* __NR_rt_sigaction */ jeq #35, good /* __NR_nanosleep */ - bad: ret #0 /* SECCOMP_RET_KILL */ + bad: ret #0 /* SECCOMP_RET_KILL_THREAD */ good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */ The above example code can be placed into a file (here called "foo"), and diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index f4977357daf2..d76396f2d8ed 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -87,11 +87,11 @@ Return values A seccomp filter may return any of the following values. If multiple filters exist, the return value for the evaluation of a given system call will always use the highest precedent value. (For example, -``SECCOMP_RET_KILL`` will always take precedence.) +``SECCOMP_RET_KILL_THREAD`` will always take precedence.) In precedence order, they are: -``SECCOMP_RET_KILL``: +``SECCOMP_RET_KILL_THREAD``: Results in the task exiting immediately without executing the system call. The exit status of the task (``status & 0x7f``) will be ``SIGSYS``, not ``SIGKILL``. diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index f94433263e4b..5a03f699eb17 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -27,7 +27,8 @@ * The ordering ensures that a min_t() over composed return values always * selects the least permissive choice. */ -#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ +#define SECCOMP_RET_KILL_THREAD 0x00000000U /* kill the thread */ +#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD #define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ #define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ #define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 59cde2ed3b92..95ac54cff00f 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -192,7 +192,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, /* Ensure unexpected behavior doesn't result in failing open. */ if (unlikely(WARN_ON(f == NULL))) - return SECCOMP_RET_KILL; + return SECCOMP_RET_KILL_THREAD; if (!sd) { populate_seccomp_data(&sd_local); @@ -529,15 +529,17 @@ static void seccomp_send_sigsys(int syscall, int reason) #endif /* CONFIG_SECCOMP_FILTER */ /* For use with seccomp_actions_logged */ -#define SECCOMP_LOG_KILL (1 << 0) +#define SECCOMP_LOG_KILL_THREAD (1 << 0) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) #define SECCOMP_LOG_LOG (1 << 5) #define SECCOMP_LOG_ALLOW (1 << 6) -static u32 seccomp_actions_logged = SECCOMP_LOG_KILL | SECCOMP_LOG_TRAP | - SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_THREAD | + SECCOMP_LOG_TRAP | + SECCOMP_LOG_ERRNO | + SECCOMP_LOG_TRACE | SECCOMP_LOG_LOG; static inline void seccomp_log(unsigned long syscall, long signr, u32 action, @@ -560,13 +562,13 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, case SECCOMP_RET_LOG: log = seccomp_actions_logged & SECCOMP_LOG_LOG; break; - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: default: - log = seccomp_actions_logged & SECCOMP_LOG_KILL; + log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD; } /* - * Force an audit message to be emitted when the action is RET_KILL, + * Force an audit message to be emitted when the action is RET_KILL_*, * RET_LOG, or the FILTER_FLAG_LOG bit was set and the action is * allowed to be logged by the admin. */ @@ -605,7 +607,7 @@ static void __secure_computing_strict(int this_syscall) #ifdef SECCOMP_DEBUG dump_stack(); #endif - seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL, true); + seccomp_log(this_syscall, SIGKILL, SECCOMP_RET_KILL_THREAD, true); do_exit(SIGKILL); } @@ -716,7 +718,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, */ return 0; - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: default: seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ @@ -878,7 +880,7 @@ static long seccomp_get_action_avail(const char __user *uaction) return -EFAULT; switch (action) { - case SECCOMP_RET_KILL: + case SECCOMP_RET_KILL_THREAD: case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: case SECCOMP_RET_TRACE: @@ -1029,19 +1031,20 @@ out: #ifdef CONFIG_SYSCTL /* Human readable action names for friendly sysctl interaction */ -#define SECCOMP_RET_KILL_NAME "kill" +#define SECCOMP_RET_KILL_THREAD_NAME "kill_thread" #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" #define SECCOMP_RET_TRACE_NAME "trace" #define SECCOMP_RET_LOG_NAME "log" #define SECCOMP_RET_ALLOW_NAME "allow" -static const char seccomp_actions_avail[] = SECCOMP_RET_KILL_NAME " " - SECCOMP_RET_TRAP_NAME " " - SECCOMP_RET_ERRNO_NAME " " - SECCOMP_RET_TRACE_NAME " " - SECCOMP_RET_LOG_NAME " " - SECCOMP_RET_ALLOW_NAME; +static const char seccomp_actions_avail[] = + SECCOMP_RET_KILL_THREAD_NAME " " + SECCOMP_RET_TRAP_NAME " " + SECCOMP_RET_ERRNO_NAME " " + SECCOMP_RET_TRACE_NAME " " + SECCOMP_RET_LOG_NAME " " + SECCOMP_RET_ALLOW_NAME; struct seccomp_log_name { u32 log; @@ -1049,7 +1052,7 @@ struct seccomp_log_name { }; static const struct seccomp_log_name seccomp_log_names[] = { - { SECCOMP_LOG_KILL, SECCOMP_RET_KILL_NAME }, + { SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME }, { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, { SECCOMP_LOG_TRACE, SECCOMP_RET_TRACE_NAME }, diff --git a/samples/seccomp/bpf-direct.c b/samples/seccomp/bpf-direct.c index 151ec3f52189..235ce3c49ee9 100644 --- a/samples/seccomp/bpf-direct.c +++ b/samples/seccomp/bpf-direct.c @@ -129,7 +129,7 @@ static int install_filter(void) /* Check that read is only using stdin. */ BPF_STMT(BPF_LD+BPF_W+BPF_ABS, syscall_arg(0)), BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, STDIN_FILENO, 4, 0), - BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL), + BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL_THREAD), /* Check that write is only using stdout */ BPF_STMT(BPF_LD+BPF_W+BPF_ABS, syscall_arg(0)), @@ -139,7 +139,7 @@ static int install_filter(void) BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW), BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_TRAP), - BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL), + BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL_THREAD), }; struct sock_fprog prog = { .len = (unsigned short)(sizeof(filter)/sizeof(filter[0])), diff --git a/samples/seccomp/bpf-helper.h b/samples/seccomp/bpf-helper.h index 1d8de9edd858..83dbe79cbe2c 100644 --- a/samples/seccomp/bpf-helper.h +++ b/samples/seccomp/bpf-helper.h @@ -44,7 +44,7 @@ void seccomp_bpf_print(struct sock_filter *filter, size_t count); #define ALLOW \ BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW) #define DENY \ - BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL) + BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_KILL_THREAD) #define JUMP(labels, label) \ BPF_JUMP(BPF_JMP+BPF_JA, FIND_LABEL((labels), (label)), \ JUMP_JT, JUMP_JF) diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c index 7372958eccb5..a3ba39a32449 100644 --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -68,15 +68,18 @@ #define SECCOMP_MODE_FILTER 2 #endif +#ifndef SECCOMP_RET_KILL_THREAD +#define SECCOMP_RET_KILL_THREAD 0x00000000U /* kill the thread */ +#endif #ifndef SECCOMP_RET_KILL -#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */ -#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ -#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ -#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ -#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ +#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD +#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ +#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ +#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ #endif #ifndef SECCOMP_RET_LOG -#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ +#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ #endif #ifndef SECCOMP_RET_ACTION @@ -2696,7 +2699,7 @@ TEST_SIGNAL(filter_flag_log, SIGSYS) TEST(get_action_avail) { - __u32 actions[] = { SECCOMP_RET_KILL, SECCOMP_RET_TRAP, + __u32 actions[] = { SECCOMP_RET_KILL_THREAD, SECCOMP_RET_TRAP, SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE, SECCOMP_RET_LOG, SECCOMP_RET_ALLOW }; __u32 unknown_action = 0x10000000U; -- cgit v1.3-14-g43fede From 4d3b0b05aae9ee9ce0970dc4cc0fb3fad5e85945 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 13:01:39 -0700 Subject: seccomp: Introduce SECCOMP_RET_KILL_PROCESS This introduces the BPF return value for SECCOMP_RET_KILL_PROCESS to kill an entire process. This cannot yet be reached by seccomp, but it changes the default-kill behavior (for unknown return values) from kill-thread to kill-process. Signed-off-by: Kees Cook --- include/uapi/linux/seccomp.h | 18 ++++++++++-------- kernel/seccomp.c | 22 ++++++++++++++++------ 2 files changed, 26 insertions(+), 14 deletions(-) (limited to 'kernel') diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index 5a03f699eb17..7e77c92df78a 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -22,18 +22,20 @@ /* * All BPF programs must return a 32-bit value. * The bottom 16-bits are for optional return data. - * The upper 16-bits are ordered from least permissive values to most. + * The upper 16-bits are ordered from least permissive values to most, + * as a signed value (so 0x8000000 is negative). * * The ordering ensures that a min_t() over composed return values always * selects the least permissive choice. */ -#define SECCOMP_RET_KILL_THREAD 0x00000000U /* kill the thread */ -#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD -#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ -#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ -#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ -#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ -#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ +#define SECCOMP_RET_KILL_PROCESS 0x80000000U /* kill the process */ +#define SECCOMP_RET_KILL_THREAD 0x00000000U /* kill the thread */ +#define SECCOMP_RET_KILL SECCOMP_RET_KILL_THREAD +#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */ +#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */ +#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */ +#define SECCOMP_RET_LOG 0x7ffc0000U /* allow after logging */ +#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ /* Masks for the return value sections. */ #define SECCOMP_RET_ACTION 0x7fff0000U diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 95ac54cff00f..5c7299b9d953 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -192,7 +192,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, /* Ensure unexpected behavior doesn't result in failing open. */ if (unlikely(WARN_ON(f == NULL))) - return SECCOMP_RET_KILL_THREAD; + return SECCOMP_RET_KILL_PROCESS; if (!sd) { populate_seccomp_data(&sd_local); @@ -529,14 +529,16 @@ static void seccomp_send_sigsys(int syscall, int reason) #endif /* CONFIG_SECCOMP_FILTER */ /* For use with seccomp_actions_logged */ -#define SECCOMP_LOG_KILL_THREAD (1 << 0) +#define SECCOMP_LOG_KILL_PROCESS (1 << 0) +#define SECCOMP_LOG_KILL_THREAD (1 << 1) #define SECCOMP_LOG_TRAP (1 << 2) #define SECCOMP_LOG_ERRNO (1 << 3) #define SECCOMP_LOG_TRACE (1 << 4) #define SECCOMP_LOG_LOG (1 << 5) #define SECCOMP_LOG_ALLOW (1 << 6) -static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_THREAD | +static u32 seccomp_actions_logged = SECCOMP_LOG_KILL_PROCESS | + SECCOMP_LOG_KILL_THREAD | SECCOMP_LOG_TRAP | SECCOMP_LOG_ERRNO | SECCOMP_LOG_TRACE | @@ -563,8 +565,11 @@ static inline void seccomp_log(unsigned long syscall, long signr, u32 action, log = seccomp_actions_logged & SECCOMP_LOG_LOG; break; case SECCOMP_RET_KILL_THREAD: - default: log = seccomp_actions_logged & SECCOMP_LOG_KILL_THREAD; + break; + case SECCOMP_RET_KILL_PROCESS: + default: + log = seccomp_actions_logged & SECCOMP_LOG_KILL_PROCESS; } /* @@ -719,10 +724,12 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, return 0; case SECCOMP_RET_KILL_THREAD: + case SECCOMP_RET_KILL_PROCESS: default: seccomp_log(this_syscall, SIGSYS, action, true); /* Dump core only if this is the last remaining thread. */ - if (get_nr_threads(current) == 1) { + if (action == SECCOMP_RET_KILL_PROCESS || + get_nr_threads(current) == 1) { siginfo_t info; /* Show the original registers in the dump. */ @@ -731,7 +738,10 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, seccomp_init_siginfo(&info, this_syscall, data); do_coredump(&info); } - do_exit(SIGSYS); + if (action == SECCOMP_RET_KILL_PROCESS) + do_group_exit(SIGSYS); + else + do_exit(SIGSYS); } unreachable(); -- cgit v1.3-14-g43fede From 0466bdb99e8744bc9befa8d62a317f0fd7fd7421 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 11 Aug 2017 13:12:11 -0700 Subject: seccomp: Implement SECCOMP_RET_KILL_PROCESS action MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Right now, SECCOMP_RET_KILL_THREAD (neé SECCOMP_RET_KILL) kills the current thread. There have been a few requests for this to kill the entire process (the thread group). This cannot be just changed (discovered when adding coredump support since coredumping kills the entire process) because there are userspace programs depending on the thread-kill behavior. Instead, implement SECCOMP_RET_KILL_PROCESS, which is 0x80000000, and can be processed as "-1" by the kernel, below the existing RET_KILL that is ABI-set to "0". For userspace, SECCOMP_RET_ACTION_FULL is added to expand the mask to the signed bit. Old userspace using the SECCOMP_RET_ACTION mask will see SECCOMP_RET_KILL_PROCESS as 0 still, but this would only be visible when examining the siginfo in a core dump from a RET_KILL_*, where it will think it was thread-killed instead of process-killed. Attempts to introduce this behavior via other ways (filter flags, seccomp struct flags, masked RET_DATA bits) all come with weird side-effects and baggage. This change preserves the central behavioral expectations of the seccomp filter engine without putting too great a burden on changes needed in userspace to use the new action. The new action is discoverable by userspace through either the new actions_avail sysctl or through the SECCOMP_GET_ACTION_AVAIL seccomp operation. If used without checking for availability, old kernels will treat RET_KILL_PROCESS as RET_KILL_THREAD (since the old mask will produce RET_KILL_THREAD). Cc: Paul Moore Cc: Fabricio Voznika Signed-off-by: Kees Cook --- Documentation/userspace-api/seccomp_filter.rst | 7 ++++++- include/uapi/linux/seccomp.h | 1 + kernel/seccomp.c | 9 +++++++-- 3 files changed, 14 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index d76396f2d8ed..099c412951d6 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -87,10 +87,15 @@ Return values A seccomp filter may return any of the following values. If multiple filters exist, the return value for the evaluation of a given system call will always use the highest precedent value. (For example, -``SECCOMP_RET_KILL_THREAD`` will always take precedence.) +``SECCOMP_RET_KILL_PROCESS`` will always take precedence.) In precedence order, they are: +``SECCOMP_RET_KILL_PROCESS``: + Results in the entire process exiting immediately without executing + the system call. The exit status of the task (``status & 0x7f``) + will be ``SIGSYS``, not ``SIGKILL``. + ``SECCOMP_RET_KILL_THREAD``: Results in the task exiting immediately without executing the system call. The exit status of the task (``status & 0x7f``) will diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h index 7e77c92df78a..f6bc1dea3247 100644 --- a/include/uapi/linux/seccomp.h +++ b/include/uapi/linux/seccomp.h @@ -38,6 +38,7 @@ #define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */ /* Masks for the return value sections. */ +#define SECCOMP_RET_ACTION_FULL 0xffff0000U #define SECCOMP_RET_ACTION 0x7fff0000U #define SECCOMP_RET_DATA 0x0000ffffU diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 5c7299b9d953..c24579dfa7a1 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -181,6 +181,7 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) * * Returns valid seccomp BPF response codes. */ +#define ACTION_ONLY(ret) ((s32)((ret) & (SECCOMP_RET_ACTION_FULL))) static u32 seccomp_run_filters(const struct seccomp_data *sd, struct seccomp_filter **match) { @@ -206,7 +207,7 @@ static u32 seccomp_run_filters(const struct seccomp_data *sd, for (; f; f = f->prev) { u32 cur_ret = BPF_PROG_RUN(f->prog, sd); - if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) { + if (ACTION_ONLY(cur_ret) < ACTION_ONLY(ret)) { ret = cur_ret; *match = f; } @@ -650,7 +651,7 @@ static int __seccomp_filter(int this_syscall, const struct seccomp_data *sd, filter_ret = seccomp_run_filters(sd, &match); data = filter_ret & SECCOMP_RET_DATA; - action = filter_ret & SECCOMP_RET_ACTION; + action = filter_ret & SECCOMP_RET_ACTION_FULL; switch (action) { case SECCOMP_RET_ERRNO: @@ -890,6 +891,7 @@ static long seccomp_get_action_avail(const char __user *uaction) return -EFAULT; switch (action) { + case SECCOMP_RET_KILL_PROCESS: case SECCOMP_RET_KILL_THREAD: case SECCOMP_RET_TRAP: case SECCOMP_RET_ERRNO: @@ -1041,6 +1043,7 @@ out: #ifdef CONFIG_SYSCTL /* Human readable action names for friendly sysctl interaction */ +#define SECCOMP_RET_KILL_PROCESS_NAME "kill_process" #define SECCOMP_RET_KILL_THREAD_NAME "kill_thread" #define SECCOMP_RET_TRAP_NAME "trap" #define SECCOMP_RET_ERRNO_NAME "errno" @@ -1049,6 +1052,7 @@ out: #define SECCOMP_RET_ALLOW_NAME "allow" static const char seccomp_actions_avail[] = + SECCOMP_RET_KILL_PROCESS_NAME " " SECCOMP_RET_KILL_THREAD_NAME " " SECCOMP_RET_TRAP_NAME " " SECCOMP_RET_ERRNO_NAME " " @@ -1062,6 +1066,7 @@ struct seccomp_log_name { }; static const struct seccomp_log_name seccomp_log_names[] = { + { SECCOMP_LOG_KILL_PROCESS, SECCOMP_RET_KILL_PROCESS_NAME }, { SECCOMP_LOG_KILL_THREAD, SECCOMP_RET_KILL_THREAD_NAME }, { SECCOMP_LOG_TRAP, SECCOMP_RET_TRAP_NAME }, { SECCOMP_LOG_ERRNO, SECCOMP_RET_ERRNO_NAME }, -- cgit v1.3-14-g43fede From 9cb067ef8a10bb13112e4d1c0ea996ec96527422 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 13 Sep 2017 23:29:03 +0200 Subject: genirq: Fix cpumask check in __irq_startup_managed() The result of cpumask_any_and() is invalid when result greater or equal nr_cpu_ids. The current check is checking for greater only. Fix it. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Signed-off-by: Thomas Gleixner Cc: Boris Ostrovsky Cc: Juergen Gross Cc: Tony Luck Cc: Chen Yu Cc: Marc Zyngier Cc: Alok Kataria Cc: Joerg Roedel Cc: "Rafael J. Wysocki" Cc: Steven Rostedt Cc: Christoph Hellwig Cc: Peter Zijlstra Cc: Borislav Petkov Cc: stable@vger.kernel.org Cc: Paolo Bonzini Cc: Rui Zhang Cc: "K. Y. Srinivasan" Cc: Arjan van de Ven Cc: Dan Williams Cc: Len Brown Link: http://lkml.kernel.org/r/20170913213152.272283444@linutronix.de --- kernel/irq/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel') diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index f51b7b6d2451..6fc89fd93824 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -202,7 +202,7 @@ __irq_startup_managed(struct irq_desc *desc, struct cpumask *aff, bool force) irqd_clr_managed_shutdown(d); - if (cpumask_any_and(aff, cpu_online_mask) > nr_cpu_ids) { + if (cpumask_any_and(aff, cpu_online_mask) >= nr_cpu_ids) { /* * Catch code which fiddles with enable_irq() on a managed * and potentially shutdown IRQ. Chained interrupt -- cgit v1.3-14-g43fede From 582db7e0c4c2fc5bb4f932f268035883385e3692 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 18 Sep 2017 15:03:46 +0200 Subject: bpf: devmap: pass on return value of bpf_map_precharge_memlock If bpf_map_precharge_memlock in dev_map_alloc, -ENOMEM is returned regardless of the actual error produced by bpf_map_precharge_memlock. Fix it by passing on the error returned by bpf_map_precharge_memlock. Also return -EINVAL instead of -ENOMEM if the page count overflow check fails. This makes dev_map_alloc match the behavior of other bpf maps' alloc functions wrt. return values. Signed-off-by: Tobias Klauser Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/devmap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c index 959c9a07f318..e093d9a2c4dd 100644 --- a/kernel/bpf/devmap.c +++ b/kernel/bpf/devmap.c @@ -75,8 +75,8 @@ static u64 dev_map_bitmap_size(const union bpf_attr *attr) static struct bpf_map *dev_map_alloc(union bpf_attr *attr) { struct bpf_dtab *dtab; + int err = -EINVAL; u64 cost; - int err; /* check sanity of attributes */ if (attr->max_entries == 0 || attr->key_size != 4 || @@ -108,6 +108,8 @@ static struct bpf_map *dev_map_alloc(union bpf_attr *attr) if (err) goto free_dtab; + err = -ENOMEM; + /* A per cpu bitfield with a bit per possible net device */ dtab->flush_needed = __alloc_percpu(dev_map_bitmap_size(attr), __alignof__(unsigned long)); @@ -128,7 +130,7 @@ static struct bpf_map *dev_map_alloc(union bpf_attr *attr) free_dtab: free_percpu(dtab->flush_needed); kfree(dtab); - return ERR_PTR(-ENOMEM); + return ERR_PTR(err); } static void dev_map_free(struct bpf_map *map) -- cgit v1.3-14-g43fede From 8dd33bcb7050dd6f8c1432732f930932c9d3a33e Mon Sep 17 00:00:00 2001 From: Bo Yan Date: Mon, 18 Sep 2017 10:03:35 -0700 Subject: tracing: Erase irqsoff trace with empty write One convenient way to erase trace is "echo > trace". However, this is currently broken if the current tracer is irqsoff tracer. This is because irqsoff tracer use max_buffer as the default trace buffer. Set the max_buffer as the one to be cleared when it's the trace buffer currently in use. Link: http://lkml.kernel.org/r/1505754215-29411-1-git-send-email-byan@nvidia.com Cc: Cc: stable@vger.kernel.org Fixes: 4acd4d00f ("tracing: give easy way to clear trace buffer") Signed-off-by: Bo Yan Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 5360b7aec57a..a7fb136da891 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4020,11 +4020,17 @@ static int tracing_open(struct inode *inode, struct file *file) /* If this file was open for write, then erase contents */ if ((file->f_mode & FMODE_WRITE) && (file->f_flags & O_TRUNC)) { int cpu = tracing_get_cpu(inode); + struct trace_buffer *trace_buf = &tr->trace_buffer; + +#ifdef CONFIG_TRACER_MAX_TRACE + if (tr->current_trace->print_max) + trace_buf = &tr->max_buffer; +#endif if (cpu == RING_BUFFER_ALL_CPUS) - tracing_reset_online_cpus(&tr->trace_buffer); + tracing_reset_online_cpus(trace_buf); else - tracing_reset(&tr->trace_buffer, cpu); + tracing_reset(trace_buf, cpu); } if (file->f_mode & FMODE_READ) { -- cgit v1.3-14-g43fede From c7b3ae0bd2ca658c7a71c49901d08c590294fac9 Mon Sep 17 00:00:00 2001 From: "Ziqian SUN (Zamir)" Date: Mon, 11 Sep 2017 14:26:35 +0800 Subject: tracing: Ignore mmiotrace from kernel commandline The mmiotrace tracer cannot be enabled with ftrace=mmiotrace in kernel commandline. With this patch, noboot is added to the tracer struct, and when system boot with a tracer that has noboot=true, it will print out a warning message and continue booting. Link: http://lkml.kernel.org/r/1505111195-31942-1-git-send-email-zsun@redhat.com Signed-off-by: Ziqian SUN (Zamir) Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 7 +++++++ kernel/trace/trace.h | 2 ++ kernel/trace/trace_mmiotrace.c | 1 + 3 files changed, 10 insertions(+) (limited to 'kernel') diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a7fb136da891..d3ca35f38803 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5364,6 +5364,13 @@ static int tracing_set_tracer(struct trace_array *tr, const char *buf) if (t == tr->current_trace) goto out; + /* Some tracers won't work on kernel command line */ + if (system_state < SYSTEM_RUNNING && t->noboot) { + pr_warn("Tracer '%s' is not allowed on command line, ignored\n", + t->name); + goto out; + } + /* Some tracers are only allowed for the top level buffer */ if (!trace_ok_for_array(t, tr)) { ret = -EINVAL; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index fb5d54d0d1b3..652c682707cd 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -444,6 +444,8 @@ struct tracer { #ifdef CONFIG_TRACER_MAX_TRACE bool use_max_tr; #endif + /* True if tracer cannot be enabled in kernel param */ + bool noboot; }; diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index cd7480d0a201..dca78fc48439 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -282,6 +282,7 @@ static struct tracer mmio_tracer __read_mostly = .close = mmio_close, .read = mmio_read, .print_line = mmio_print_line, + .noboot = true, }; __init static int init_mmio_trace(void) -- cgit v1.3-14-g43fede From 75df6e688ccd517e339a7c422ef7ad73045b18a2 Mon Sep 17 00:00:00 2001 From: Tahsin Erdogan Date: Sun, 17 Sep 2017 03:23:48 -0700 Subject: tracing: Fix trace_pipe behavior for instance traces When reading data from trace_pipe, tracing_wait_pipe() performs a check to see if tracing has been turned off after some data was read. Currently, this check always looks at global trace state, but it should be checking the trace instance where trace_pipe is located at. Because of this bug, cat instances/i1/trace_pipe in the following script will immediately exit instead of waiting for data: cd /sys/kernel/debug/tracing echo 0 > tracing_on mkdir -p instances/i1 echo 1 > instances/i1/tracing_on echo 1 > instances/i1/events/sched/sched_process_exec/enable cat instances/i1/trace_pipe Link: http://lkml.kernel.org/r/20170917102348.1615-1-tahsin@google.com Cc: stable@vger.kernel.org Fixes: 10246fa35d4f ("tracing: give easy way to clear trace buffer") Signed-off-by: Tahsin Erdogan Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'kernel') diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d3ca35f38803..752e5daf0896 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5680,7 +5680,7 @@ static int tracing_wait_pipe(struct file *filp) * * iter->pos will be 0 if we haven't read anything. */ - if (!tracing_is_on() && iter->pos) + if (!tracer_tracing_is_on(iter->tr) && iter->pos) break; mutex_unlock(&iter->mutex); -- cgit v1.3-14-g43fede From 930651a75bf1ba6893a8b8475270664ebdb6cf4a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 Sep 2017 09:15:59 -0700 Subject: bpf: do not disable/enable BH in bpf_map_free_id() syzkaller reported following splat [1] Since hard irq are disabled by the caller, bpf_map_free_id() should not try to enable/disable BH. Another solution would be to change htab_map_delete_elem() to defer the free_htab_elem() call after raw_spin_unlock_irqrestore(&b->lock, flags), but this might be not enough to cover other code paths. [1] WARNING: CPU: 1 PID: 8052 at kernel/softirq.c:161 __local_bh_enable_ip +0x1e/0x160 kernel/softirq.c:161 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 8052 Comm: syz-executor1 Not tainted 4.13.0-next-20170915+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:181 __warn+0x1c4/0x1d9 kernel/panic.c:542 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:__local_bh_enable_ip+0x1e/0x160 kernel/softirq.c:161 RSP: 0018:ffff8801cdcd7748 EFLAGS: 00010046 RAX: 0000000000000082 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 1ffffffff0b5933c RSI: 0000000000000201 RDI: ffffffff85ac99e0 RBP: ffff8801cdcd7758 R08: ffffffff85b87158 R09: 1ffff10039b9aec6 R10: ffff8801c99f24c0 R11: 0000000000000002 R12: ffffffff817b0b47 R13: dffffc0000000000 R14: ffff8801cdcd77e8 R15: 0000000000000001 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:176 [inline] _raw_spin_unlock_bh+0x30/0x40 kernel/locking/spinlock.c:207 spin_unlock_bh include/linux/spinlock.h:361 [inline] bpf_map_free_id kernel/bpf/syscall.c:197 [inline] __bpf_map_put+0x267/0x320 kernel/bpf/syscall.c:227 bpf_map_put+0x1a/0x20 kernel/bpf/syscall.c:235 bpf_map_fd_put_ptr+0x15/0x20 kernel/bpf/map_in_map.c:96 free_htab_elem+0xc3/0x1b0 kernel/bpf/hashtab.c:658 htab_map_delete_elem+0x74d/0x970 kernel/bpf/hashtab.c:1063 map_delete_elem kernel/bpf/syscall.c:633 [inline] SYSC_bpf kernel/bpf/syscall.c:1479 [inline] SyS_bpf+0x2188/0x46a0 kernel/bpf/syscall.c:1451 entry_SYSCALL_64_fastpath+0x1f/0xbe Fixes: f3f1c054c288 ("bpf: Introduce bpf_map ID") Signed-off-by: Eric Dumazet Cc: Martin KaFai Lau Acked-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- kernel/bpf/syscall.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'kernel') diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index cb17e1cd1d43..25d074920a00 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -186,15 +186,17 @@ static int bpf_map_alloc_id(struct bpf_map *map) static void bpf_map_free_id(struct bpf_map *map, bool do_idr_lock) { + unsigned long flags; + if (do_idr_lock) - spin_lock_bh(&map_idr_lock); + spin_lock_irqsave(&map_idr_lock, flags); else __acquire(&map_idr_lock); idr_remove(&map_idr, map->id); if (do_idr_lock) - spin_unlock_bh(&map_idr_lock); + spin_unlock_irqrestore(&map_idr_lock, flags); else __release(&map_idr_lock); } -- cgit v1.3-14-g43fede From 7c30013133964aaa2f45c17d6e9782ac6cfd7f5f Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 20 Sep 2017 00:44:21 +0200 Subject: bpf: fix ri->map_owner pointer on bpf_prog_realloc Commit 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") passed the pointer to the prog itself to be loaded into r4 prior on bpf_redirect_map() helper call, so that we can store the owner into ri->map_owner out of the helper. Issue with that is that the actual address of the prog is still subject to change when subsequent rewrites occur that require slow path in bpf_prog_realloc() to alloc more memory, e.g. from patching inlining helper functions or constant blinding. Thus, we really need to take prog->aux as the address we're holding, which also works with prog clones as they share the same aux object. Instead of then fetching aux->prog during runtime, which could potentially incur cache misses due to false sharing, we are going to just use aux for comparison on the map owner. This will also keep the patchlet of the same size, and later check in xdp_map_invalid() only accesses read-only aux pointer from the prog, it's also in the same cacheline already from prior access when calling bpf_func. Fixes: 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/verifier.c | 7 ++++++- net/core/filter.c | 24 +++++++++++++++--------- 2 files changed, 21 insertions(+), 10 deletions(-) (limited to 'kernel') diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 799b2451ef2d..b914fbe1383e 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -4205,7 +4205,12 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env) } if (insn->imm == BPF_FUNC_redirect_map) { - u64 addr = (unsigned long)prog; + /* Note, we cannot use prog directly as imm as subsequent + * rewrites would still change the prog pointer. The only + * stable address we can use is aux, which also works with + * prog clones during blinding. + */ + u64 addr = (unsigned long)prog->aux; struct bpf_insn r4_ld[] = { BPF_LD_IMM64(BPF_REG_4, addr), *insn, diff --git a/net/core/filter.c b/net/core/filter.c index 24dd33dd9f04..82edad58d066 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1794,7 +1794,7 @@ struct redirect_info { u32 flags; struct bpf_map *map; struct bpf_map *map_to_flush; - const struct bpf_prog *map_owner; + unsigned long map_owner; }; static DEFINE_PER_CPU(struct redirect_info, redirect_info); @@ -2500,11 +2500,17 @@ void xdp_do_flush_map(void) } EXPORT_SYMBOL_GPL(xdp_do_flush_map); +static inline bool xdp_map_invalid(const struct bpf_prog *xdp_prog, + unsigned long aux) +{ + return (unsigned long)xdp_prog->aux != aux; +} + static int xdp_do_redirect_map(struct net_device *dev, struct xdp_buff *xdp, struct bpf_prog *xdp_prog) { struct redirect_info *ri = this_cpu_ptr(&redirect_info); - const struct bpf_prog *map_owner = ri->map_owner; + unsigned long map_owner = ri->map_owner; struct bpf_map *map = ri->map; struct net_device *fwd = NULL; u32 index = ri->ifindex; @@ -2512,9 +2518,9 @@ static int xdp_do_redirect_map(struct net_device *dev, struct xdp_buff *xdp, ri->ifindex = 0; ri->map = NULL; - ri->map_owner = NULL; + ri->map_owner = 0; - if (unlikely(map_owner != xdp_prog)) { + if (unlikely(xdp_map_invalid(xdp_prog, map_owner))) { err = -EFAULT; map = NULL; goto err; @@ -2574,7 +2580,7 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb, struct bpf_prog *xdp_prog) { struct redirect_info *ri = this_cpu_ptr(&redirect_info); - const struct bpf_prog *map_owner = ri->map_owner; + unsigned long map_owner = ri->map_owner; struct bpf_map *map = ri->map; struct net_device *fwd = NULL; u32 index = ri->ifindex; @@ -2583,10 +2589,10 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb, ri->ifindex = 0; ri->map = NULL; - ri->map_owner = NULL; + ri->map_owner = 0; if (map) { - if (unlikely(map_owner != xdp_prog)) { + if (unlikely(xdp_map_invalid(xdp_prog, map_owner))) { err = -EFAULT; map = NULL; goto err; @@ -2632,7 +2638,7 @@ BPF_CALL_2(bpf_xdp_redirect, u32, ifindex, u64, flags) ri->ifindex = ifindex; ri->flags = flags; ri->map = NULL; - ri->map_owner = NULL; + ri->map_owner = 0; return XDP_REDIRECT; } @@ -2646,7 +2652,7 @@ static const struct bpf_func_proto bpf_xdp_redirect_proto = { }; BPF_CALL_4(bpf_xdp_redirect_map, struct bpf_map *, map, u32, ifindex, u64, flags, - const struct bpf_prog *, map_owner) + unsigned long, map_owner) { struct redirect_info *ri = this_cpu_ptr(&redirect_info); -- cgit v1.3-14-g43fede From ec9dd352d591f0c90402ec67a317c1ed4fb2e638 Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Mon, 18 Sep 2017 16:38:36 -0700 Subject: bpf: one perf event close won't free bpf program attached by another perf event This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: Yonghong Song Signed-off-by: David S. Miller --- include/linux/trace_events.h | 1 + kernel/events/core.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'kernel') diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h index 7f11050746ae..2e0f22298fe9 100644 --- a/include/linux/trace_events.h +++ b/include/linux/trace_events.h @@ -272,6 +272,7 @@ struct trace_event_call { int perf_refcount; struct hlist_head __percpu *perf_events; struct bpf_prog *prog; + struct perf_event *bpf_prog_owner; int (*perf_perm)(struct trace_event_call *, struct perf_event *); diff --git a/kernel/events/core.c b/kernel/events/core.c index 3e691b75b2db..6bc21e202ae4 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -8171,6 +8171,7 @@ static int perf_event_set_bpf_prog(struct perf_event *event, u32 prog_fd) } } event->tp_event->prog = prog; + event->tp_event->bpf_prog_owner = event; return 0; } @@ -8185,7 +8186,7 @@ static void perf_event_free_bpf_prog(struct perf_event *event) return; prog = event->tp_event->prog; - if (prog) { + if (prog && event->tp_event->bpf_prog_owner == event) { event->tp_event->prog = NULL; bpf_prog_put(prog); } -- cgit v1.3-14-g43fede