From 8f5af6f1f2d09fe5eac86a5dc1731a5917c1503a Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Fri, 4 May 2012 08:31:53 -0700 Subject: rcu: RCU_FAST_NO_HZ detection of callback adoption In the present implementations of CPU hotplug, the outgoing CPU is guaranteed to run its stop-machine process on the way out, which will guarantee that RCU_FAST_NO_HZ forces the CPU out of dyntick-idle mode. However, new versions of CPU hotplug might not work this way. This commit therefore removes this design constraint by explicitly notifying CPUs when they adopt non-lazy RCU callbacks. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Heiko Carstens Tested-by: Pascal Chapperon --- kernel/rcutree.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'kernel') diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 0da7b88d92d0..3b0f1337f75b 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1397,6 +1397,8 @@ static void rcu_adopt_orphan_cbs(struct rcu_state *rsp) rdp->qlen_lazy += rsp->qlen_lazy; rdp->qlen += rsp->qlen; rdp->n_cbs_adopted += rsp->qlen; + if (rsp->qlen_lazy != rsp->qlen) + rcu_idle_count_callbacks_posted(); rsp->qlen_lazy = 0; rsp->qlen = 0; -- cgit v1.2.3-59-g8ed1b From fd4b352687fd8604d49c190c4c9ea9e369fd42d5 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sat, 5 May 2012 19:10:35 -0700 Subject: rcu: Update RCU_FAST_NO_HZ tracing for lazy callbacks In the current code, a short dyntick-idle interval (where there is at least one non-lazy callback on the CPU) and a long dyntick-idle interval (where there are only lazy callbacks on the CPU) are traced identically, which can be less than helpful. This commit therefore emits different event traces in these two cases. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Heiko Carstens Tested-by: Pascal Chapperon --- include/trace/events/rcu.h | 1 + kernel/rcutree_plugin.h | 8 +++++--- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'kernel') diff --git a/include/trace/events/rcu.h b/include/trace/events/rcu.h index 1480900c511c..d274734b2aa4 100644 --- a/include/trace/events/rcu.h +++ b/include/trace/events/rcu.h @@ -289,6 +289,7 @@ TRACE_EVENT(rcu_dyntick, * "In holdoff": Nothing to do, holding off after unsuccessful attempt. * "Begin holdoff": Attempt failed, don't retry until next jiffy. * "Dyntick with callbacks": Entering dyntick-idle despite callbacks. + * "Dyntick with lazy callbacks": Entering dyntick-idle w/lazy callbacks. * "More callbacks": Still more callbacks, try again to clear them out. * "Callbacks drained": All callbacks processed, off to dyntick idle! * "Timer": Timer fired to cause CPU to continue processing callbacks. diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 2411000d9869..5449f02c4820 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -2165,15 +2165,17 @@ static void rcu_prepare_for_idle(int cpu) !rcu_pending(cpu) && !local_softirq_pending()) { /* Can we go dyntick-idle despite still having callbacks? */ - trace_rcu_prep_idle("Dyntick with callbacks"); per_cpu(rcu_dyntick_drain, cpu) = 0; per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; - if (rcu_cpu_has_nonlazy_callbacks(cpu)) + if (rcu_cpu_has_nonlazy_callbacks(cpu)) { + trace_rcu_prep_idle("Dyntick with callbacks"); per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies + RCU_IDLE_GP_DELAY; - else + } else { per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies + RCU_IDLE_LAZY_GP_DELAY; + trace_rcu_prep_idle("Dyntick with lazy callbacks"); + } tp = &per_cpu(rcu_idle_gp_timer, cpu); mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu)); per_cpu(rcu_nonlazy_posted_snap, cpu) = -- cgit v1.2.3-59-g8ed1b From 5955f7eecd77d6b440db278b266cfecdb72ecd00 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 9 May 2012 12:07:05 -0700 Subject: rcu: Move RCU_FAST_NO_HZ per-CPU variables to rcu_dynticks structure The RCU_FAST_NO_HZ code relies on a number of per-CPU variables. This works, but is hidden from someone scanning the data structures in rcutree.h. This commit therefore converts these per-CPU variables to fields in the per-CPU rcu_dynticks structures. Suggested-by: Peter Zijlstra Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Heiko Carstens Tested-by: Pascal Chapperon --- kernel/rcutree.h | 14 +++++++ kernel/rcutree_plugin.h | 99 ++++++++++++++++++++++--------------------------- 2 files changed, 58 insertions(+), 55 deletions(-) (limited to 'kernel') diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 7f5d138dedf5..ea056495783e 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -84,6 +84,20 @@ struct rcu_dynticks { /* Process level is worth LLONG_MAX/2. */ int dynticks_nmi_nesting; /* Track NMI nesting level. */ atomic_t dynticks; /* Even value for idle, else odd. */ +#ifdef CONFIG_RCU_FAST_NO_HZ + int dyntick_drain; /* Prepare-for-idle state variable. */ + unsigned long dyntick_holdoff; + /* No retries for the jiffy of failure. */ + struct timer_list idle_gp_timer; + /* Wake up CPU sleeping with callbacks. */ + unsigned long idle_gp_timer_expires; + /* When to wake up CPU (for repost). */ + bool idle_first_pass; /* First pass of attempt to go idle? */ + unsigned long nonlazy_posted; + /* # times non-lazy CBs posted to CPU. */ + unsigned long nonlazy_posted_snap; + /* idle-period nonlazy_posted snapshot. */ +#endif /* #ifdef CONFIG_RCU_FAST_NO_HZ */ }; /* RCU's kthread states for tracing. */ diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 5449f02c4820..6bd9637d5d83 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1962,21 +1962,6 @@ static void rcu_idle_count_callbacks_posted(void) #define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */ #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ -/* Loop counter for rcu_prepare_for_idle(). */ -static DEFINE_PER_CPU(int, rcu_dyntick_drain); -/* If rcu_dyntick_holdoff==jiffies, don't try to enter dyntick-idle mode. */ -static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff); -/* Timer to awaken the CPU if it enters dyntick-idle mode with callbacks. */ -static DEFINE_PER_CPU(struct timer_list, rcu_idle_gp_timer); -/* Scheduled expiry time for rcu_idle_gp_timer to allow reposting. */ -static DEFINE_PER_CPU(unsigned long, rcu_idle_gp_timer_expires); -/* Enable special processing on first attempt to enter dyntick-idle mode. */ -static DEFINE_PER_CPU(bool, rcu_idle_first_pass); -/* Running count of non-lazy callbacks posted, never decremented. */ -static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted); -/* Snapshot of rcu_nonlazy_posted to detect meaningful exits from idle. */ -static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap); - /* * Allow the CPU to enter dyntick-idle mode if either: (1) There are no * callbacks on this CPU, (2) this CPU has not yet attempted to enter @@ -1988,13 +1973,15 @@ static DEFINE_PER_CPU(unsigned long, rcu_nonlazy_posted_snap); */ int rcu_needs_cpu(int cpu) { + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + /* Flag a new idle sojourn to the idle-entry state machine. */ - per_cpu(rcu_idle_first_pass, cpu) = 1; + rdtp->idle_first_pass = 1; /* If no callbacks, RCU doesn't need the CPU. */ if (!rcu_cpu_has_callbacks(cpu)) return 0; /* Otherwise, RCU needs the CPU only if it recently tried and failed. */ - return per_cpu(rcu_dyntick_holdoff, cpu) == jiffies; + return rdtp->dyntick_holdoff == jiffies; } /* @@ -2075,21 +2062,24 @@ static void rcu_idle_gp_timer_func(unsigned long cpu_in) */ static void rcu_prepare_for_idle_init(int cpu) { - per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; - setup_timer(&per_cpu(rcu_idle_gp_timer, cpu), - rcu_idle_gp_timer_func, cpu); - per_cpu(rcu_idle_gp_timer_expires, cpu) = jiffies - 1; - per_cpu(rcu_idle_first_pass, cpu) = 1; + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + + rdtp->dyntick_holdoff = jiffies - 1; + setup_timer(&rdtp->idle_gp_timer, rcu_idle_gp_timer_func, cpu); + rdtp->idle_gp_timer_expires = jiffies - 1; + rdtp->idle_first_pass = 1; } /* * Clean up for exit from idle. Because we are exiting from idle, there - * is no longer any point to rcu_idle_gp_timer, so cancel it. This will + * is no longer any point to ->idle_gp_timer, so cancel it. This will * do nothing if this timer is not active, so just cancel it unconditionally. */ static void rcu_cleanup_after_idle(int cpu) { - del_timer(&per_cpu(rcu_idle_gp_timer, cpu)); + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + + del_timer(&rdtp->idle_gp_timer); trace_rcu_prep_idle("Cleanup after idle"); } @@ -2108,42 +2098,41 @@ static void rcu_cleanup_after_idle(int cpu) * Because it is not legal to invoke rcu_process_callbacks() with irqs * disabled, we do one pass of force_quiescent_state(), then do a * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked - * later. The per-cpu rcu_dyntick_drain variable controls the sequencing. + * later. The ->dyntick_drain field controls the sequencing. * * The caller must have disabled interrupts. */ static void rcu_prepare_for_idle(int cpu) { struct timer_list *tp; + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); /* * If this is an idle re-entry, for example, due to use of * RCU_NONIDLE() or the new idle-loop tracing API within the idle * loop, then don't take any state-machine actions, unless the * momentary exit from idle queued additional non-lazy callbacks. - * Instead, repost the rcu_idle_gp_timer if this CPU has callbacks + * Instead, repost the ->idle_gp_timer if this CPU has callbacks * pending. */ - if (!per_cpu(rcu_idle_first_pass, cpu) && - (per_cpu(rcu_nonlazy_posted, cpu) == - per_cpu(rcu_nonlazy_posted_snap, cpu))) { + if (!rdtp->idle_first_pass && + (rdtp->nonlazy_posted == rdtp->nonlazy_posted_snap)) { if (rcu_cpu_has_callbacks(cpu)) { - tp = &per_cpu(rcu_idle_gp_timer, cpu); - mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu)); + tp = &rdtp->idle_gp_timer; + mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); } return; } - per_cpu(rcu_idle_first_pass, cpu) = 0; - per_cpu(rcu_nonlazy_posted_snap, cpu) = - per_cpu(rcu_nonlazy_posted, cpu) - 1; + rdtp->idle_first_pass = 0; + rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted - 1; /* * If there are no callbacks on this CPU, enter dyntick-idle mode. * Also reset state to avoid prejudicing later attempts. */ if (!rcu_cpu_has_callbacks(cpu)) { - per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; - per_cpu(rcu_dyntick_drain, cpu) = 0; + rdtp->dyntick_holdoff = jiffies - 1; + rdtp->dyntick_drain = 0; trace_rcu_prep_idle("No callbacks"); return; } @@ -2152,38 +2141,37 @@ static void rcu_prepare_for_idle(int cpu) * If in holdoff mode, just return. We will presumably have * refrained from disabling the scheduling-clock tick. */ - if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies) { + if (rdtp->dyntick_holdoff == jiffies) { trace_rcu_prep_idle("In holdoff"); return; } - /* Check and update the rcu_dyntick_drain sequencing. */ - if (per_cpu(rcu_dyntick_drain, cpu) <= 0) { + /* Check and update the ->dyntick_drain sequencing. */ + if (rdtp->dyntick_drain <= 0) { /* First time through, initialize the counter. */ - per_cpu(rcu_dyntick_drain, cpu) = RCU_IDLE_FLUSHES; - } else if (per_cpu(rcu_dyntick_drain, cpu) <= RCU_IDLE_OPT_FLUSHES && + rdtp->dyntick_drain = RCU_IDLE_FLUSHES; + } else if (rdtp->dyntick_drain <= RCU_IDLE_OPT_FLUSHES && !rcu_pending(cpu) && !local_softirq_pending()) { /* Can we go dyntick-idle despite still having callbacks? */ - per_cpu(rcu_dyntick_drain, cpu) = 0; - per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; + rdtp->dyntick_drain = 0; + rdtp->dyntick_holdoff = jiffies; if (rcu_cpu_has_nonlazy_callbacks(cpu)) { trace_rcu_prep_idle("Dyntick with callbacks"); - per_cpu(rcu_idle_gp_timer_expires, cpu) = + rdtp->idle_gp_timer_expires = jiffies + RCU_IDLE_GP_DELAY; } else { - per_cpu(rcu_idle_gp_timer_expires, cpu) = + rdtp->idle_gp_timer_expires = jiffies + RCU_IDLE_LAZY_GP_DELAY; trace_rcu_prep_idle("Dyntick with lazy callbacks"); } - tp = &per_cpu(rcu_idle_gp_timer, cpu); - mod_timer_pinned(tp, per_cpu(rcu_idle_gp_timer_expires, cpu)); - per_cpu(rcu_nonlazy_posted_snap, cpu) = - per_cpu(rcu_nonlazy_posted, cpu); + tp = &rdtp->idle_gp_timer; + mod_timer_pinned(tp, rdtp->idle_gp_timer_expires); + rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted; return; /* Nothing more to do immediately. */ - } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) { + } else if (--(rdtp->dyntick_drain) <= 0) { /* We have hit the limit, so time to give up. */ - per_cpu(rcu_dyntick_holdoff, cpu) = jiffies; + rdtp->dyntick_holdoff = jiffies; trace_rcu_prep_idle("Begin holdoff"); invoke_rcu_core(); /* Force the CPU out of dyntick-idle. */ return; @@ -2229,7 +2217,7 @@ static void rcu_prepare_for_idle(int cpu) */ static void rcu_idle_count_callbacks_posted(void) { - __this_cpu_add(rcu_nonlazy_posted, 1); + __this_cpu_add(rcu_dynticks.nonlazy_posted, 1); } #endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */ @@ -2240,11 +2228,12 @@ static void rcu_idle_count_callbacks_posted(void) static void print_cpu_stall_fast_no_hz(char *cp, int cpu) { - struct timer_list *tltp = &per_cpu(rcu_idle_gp_timer, cpu); + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + struct timer_list *tltp = &rdtp->idle_gp_timer; sprintf(cp, "drain=%d %c timer=%lu", - per_cpu(rcu_dyntick_drain, cpu), - per_cpu(rcu_dyntick_holdoff, cpu) == jiffies ? 'H' : '.', + rdtp->dyntick_drain, + rdtp->dyntick_holdoff == jiffies ? 'H' : '.', timer_pending(tltp) ? tltp->expires - jiffies : -1); } -- cgit v1.2.3-59-g8ed1b From aa9b16306e3243229580ff889cc59fd66bf77973 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 10 May 2012 16:41:44 -0700 Subject: rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon Reported-by: Heiko Carstens Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Heiko Carstens Tested-by: Pascal Chapperon --- include/linux/rcutiny.h | 6 +++-- include/linux/rcutree.h | 2 +- kernel/rcutree_plugin.h | 66 +++++++++++++++++++++++++++++++----------------- kernel/time/tick-sched.c | 7 ++++- 4 files changed, 54 insertions(+), 27 deletions(-) (limited to 'kernel') diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index adb5e5a38cae..854dc4c5c271 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -87,8 +87,9 @@ static inline void kfree_call_rcu(struct rcu_head *head, #ifdef CONFIG_TINY_RCU -static inline int rcu_needs_cpu(int cpu) +static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { + *delta_jiffies = ULONG_MAX; return 0; } @@ -96,8 +97,9 @@ static inline int rcu_needs_cpu(int cpu) int rcu_preempt_needs_cpu(void); -static inline int rcu_needs_cpu(int cpu) +static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { + *delta_jiffies = ULONG_MAX; return rcu_preempt_needs_cpu(); } diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 3c6083cde4fc..952b79339304 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -32,7 +32,7 @@ extern void rcu_init(void); extern void rcu_note_context_switch(int cpu); -extern int rcu_needs_cpu(int cpu); +extern int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies); extern void rcu_cpu_stall_reset(void); /* diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 6bd9637d5d83..5271a020887e 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1886,8 +1886,9 @@ static void __cpuinit rcu_prepare_kthreads(int cpu) * Because we not have RCU_FAST_NO_HZ, just check whether this CPU needs * any flavor of RCU. */ -int rcu_needs_cpu(int cpu) +int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) { + *delta_jiffies = ULONG_MAX; return rcu_cpu_has_callbacks(cpu); } @@ -1962,28 +1963,6 @@ static void rcu_idle_count_callbacks_posted(void) #define RCU_IDLE_GP_DELAY 6 /* Roughly one grace period. */ #define RCU_IDLE_LAZY_GP_DELAY (6 * HZ) /* Roughly six seconds. */ -/* - * Allow the CPU to enter dyntick-idle mode if either: (1) There are no - * callbacks on this CPU, (2) this CPU has not yet attempted to enter - * dyntick-idle mode, or (3) this CPU is in the process of attempting to - * enter dyntick-idle mode. Otherwise, if we have recently tried and failed - * to enter dyntick-idle mode, we refuse to try to enter it. After all, - * it is better to incur scheduling-clock interrupts than to spin - * continuously for the same time duration! - */ -int rcu_needs_cpu(int cpu) -{ - struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); - - /* Flag a new idle sojourn to the idle-entry state machine. */ - rdtp->idle_first_pass = 1; - /* If no callbacks, RCU doesn't need the CPU. */ - if (!rcu_cpu_has_callbacks(cpu)) - return 0; - /* Otherwise, RCU needs the CPU only if it recently tried and failed. */ - return rdtp->dyntick_holdoff == jiffies; -} - /* * Does the specified flavor of RCU have non-lazy callbacks pending on * the specified CPU? Both RCU flavor and CPU are specified by the @@ -2026,6 +2005,47 @@ static bool rcu_cpu_has_nonlazy_callbacks(int cpu) rcu_preempt_cpu_has_nonlazy_callbacks(cpu); } +/* + * Allow the CPU to enter dyntick-idle mode if either: (1) There are no + * callbacks on this CPU, (2) this CPU has not yet attempted to enter + * dyntick-idle mode, or (3) this CPU is in the process of attempting to + * enter dyntick-idle mode. Otherwise, if we have recently tried and failed + * to enter dyntick-idle mode, we refuse to try to enter it. After all, + * it is better to incur scheduling-clock interrupts than to spin + * continuously for the same time duration! + * + * The delta_jiffies argument is used to store the time when RCU is + * going to need the CPU again if it still has callbacks. The reason + * for this is that rcu_prepare_for_idle() might need to post a timer, + * but if so, it will do so after tick_nohz_stop_sched_tick() has set + * the wakeup time for this CPU. This means that RCU's timer can be + * delayed until the wakeup time, which defeats the purpose of posting + * a timer. + */ +int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies) +{ + struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu); + + /* Flag a new idle sojourn to the idle-entry state machine. */ + rdtp->idle_first_pass = 1; + /* If no callbacks, RCU doesn't need the CPU. */ + if (!rcu_cpu_has_callbacks(cpu)) { + *delta_jiffies = ULONG_MAX; + return 0; + } + if (rdtp->dyntick_holdoff == jiffies) { + /* RCU recently tried and failed, so don't try again. */ + *delta_jiffies = 1; + return 1; + } + /* Set up for the possibility that RCU will post a timer. */ + if (rcu_cpu_has_nonlazy_callbacks(cpu)) + *delta_jiffies = RCU_IDLE_GP_DELAY; + else + *delta_jiffies = RCU_IDLE_LAZY_GP_DELAY; + return 0; +} + /* * Handler for smp_call_function_single(). The only point of this * handler is to wake the CPU up, so the handler does only tracing. diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 6a3a5b9ff561..52f5ebbd443b 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -274,6 +274,7 @@ EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us); static void tick_nohz_stop_sched_tick(struct tick_sched *ts) { unsigned long seq, last_jiffies, next_jiffies, delta_jiffies; + unsigned long rcu_delta_jiffies; ktime_t last_update, expires, now; struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; u64 time_delta; @@ -322,7 +323,7 @@ static void tick_nohz_stop_sched_tick(struct tick_sched *ts) time_delta = timekeeping_max_deferment(); } while (read_seqretry(&xtime_lock, seq)); - if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) || + if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) || printk_needs_cpu(cpu) || arch_needs_cpu(cpu)) { next_jiffies = last_jiffies + 1; delta_jiffies = 1; @@ -330,6 +331,10 @@ static void tick_nohz_stop_sched_tick(struct tick_sched *ts) /* Get the next timer wheel timer */ next_jiffies = get_next_timer_interrupt(last_jiffies); delta_jiffies = next_jiffies - last_jiffies; + if (rcu_delta_jiffies < delta_jiffies) { + next_jiffies = last_jiffies + rcu_delta_jiffies; + delta_jiffies = rcu_delta_jiffies; + } } /* * Do not stop the tick, if we are only one off -- cgit v1.2.3-59-g8ed1b