From 1a19cb680be0d4b06ce9a9d6516b8f45f544d3e8 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Sun, 17 May 2015 21:44:39 +0200 Subject: ieee802154: change transmit power to s32 This patch change the transmit power from s8 to s32. This prepares to store a mbm value instead dbm inside the transmit power variable. The old interface keep the a s8 dbm value, which should be backward compatibility when assign s8 to s32. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- net/ieee802154/nl802154.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'net/ieee802154') diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c index d750d9778ba7..f3185c71af10 100644 --- a/net/ieee802154/nl802154.c +++ b/net/ieee802154/nl802154.c @@ -207,7 +207,7 @@ static const struct nla_policy nl802154_policy[NL802154_ATTR_MAX+1] = { [NL802154_ATTR_PAGE] = { .type = NLA_U8, }, [NL802154_ATTR_CHANNEL] = { .type = NLA_U8, }, - [NL802154_ATTR_TX_POWER] = { .type = NLA_S8, }, + [NL802154_ATTR_TX_POWER] = { .type = NLA_S32, }, [NL802154_ATTR_CCA_MODE] = { .type = NLA_U32, }, [NL802154_ATTR_CCA_OPT] = { .type = NLA_U32, }, @@ -301,8 +301,8 @@ static int nl802154_send_wpan_phy(struct cfg802154_registered_device *rdev, goto nla_put_failure; } - if (nla_put_s8(msg, NL802154_ATTR_TX_POWER, - rdev->wpan_phy.transmit_power)) + if (nla_put_s32(msg, NL802154_ATTR_TX_POWER, + rdev->wpan_phy.transmit_power)) goto nla_put_failure; finish: -- cgit v1.2.3-59-g8ed1b