From 7ad6848c7e81a603605fad3f3575841aab004eea Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 6 Jan 2010 20:37:01 -0800 Subject: ip: fix mc_loop checks for tunnels with multicast outer addresses When we have L3 tunnels with different inner/outer families (i.e. IPV4/IPV6) which use a multicast address as the outer tunnel destination address, multicast packets will be loopbacked back to the sending socket even if IP*_MULTICAST_LOOP is set to disabled. The mc_loop flag is present in the family specific part of the socket (e.g. the IPv4 or IPv4 specific part). setsockopt sets the inner family mc_loop flag. When the packet is pushed through the L3 tunnel it will eventually be processed by the outer family which if different will check the flag in a different part of the socket then it was set. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/ipv4/ip_output.c') diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index e34013a78ef4..3451799e3dbf 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -254,7 +254,7 @@ int ip_mc_output(struct sk_buff *skb) */ if (rt->rt_flags&RTCF_MULTICAST) { - if ((!sk || inet_sk(sk)->mc_loop) + if (sk_mc_loop(sk) #ifdef CONFIG_IP_MROUTE /* Small optimization: do not loopback not local frames, which returned after forwarding; they will be dropped -- cgit v1.2.3-59-g8ed1b