From 46d5a808558181e03a4760d2188cc9879445738a Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 23 Nov 2009 15:54:00 -0500 Subject: sctp: Update max.burst implementation Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher Signed-off-by: Vlad Yasevich --- net/sctp/associola.c | 1 + net/sctp/output.c | 23 ----------------------- net/sctp/outqueue.c | 15 +++++++++++++++ net/sctp/transport.c | 38 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 54 insertions(+), 23 deletions(-) (limited to 'net') diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 37e982510bea..880dae2ca87b 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -738,6 +738,7 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, peer->partial_bytes_acked = 0; peer->flight_size = 0; + peer->burst_limited = 0; /* Set the transport's RTO.initial value */ peer->rto = asoc->rto_initial; diff --git a/net/sctp/output.c b/net/sctp/output.c index 9e8e0ea844be..b210d2077e28 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -615,7 +615,6 @@ static sctp_xmit_t sctp_packet_can_append_data(struct sctp_packet *packet, sctp_xmit_t retval = SCTP_XMIT_OK; size_t datasize, rwnd, inflight, flight_size; struct sctp_transport *transport = packet->transport; - __u32 max_burst_bytes; struct sctp_association *asoc = transport->asoc; struct sctp_outq *q = &asoc->outqueue; @@ -648,28 +647,6 @@ static sctp_xmit_t sctp_packet_can_append_data(struct sctp_packet *packet, } } - /* sctpimpguide-05 2.14.2 - * D) When the time comes for the sender to - * transmit new DATA chunks, the protocol parameter Max.Burst MUST - * first be applied to limit how many new DATA chunks may be sent. - * The limit is applied by adjusting cwnd as follows: - * if ((flightsize + Max.Burst * MTU) < cwnd) - * cwnd = flightsize + Max.Burst * MTU - */ - max_burst_bytes = asoc->max_burst * asoc->pathmtu; - if ((flight_size + max_burst_bytes) < transport->cwnd) { - transport->cwnd = flight_size + max_burst_bytes; - SCTP_DEBUG_PRINTK("%s: cwnd limited by max_burst: " - "transport: %p, cwnd: %d, " - "ssthresh: %d, flight_size: %d, " - "pba: %d\n", - __func__, transport, - transport->cwnd, - transport->ssthresh, - transport->flight_size, - transport->partial_bytes_acked); - } - /* RFC 2960 6.1 Transmission of DATA Chunks * * B) At any given time, the sender MUST NOT transmit new data diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 5732661c87d3..2f2377369e2b 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -931,6 +931,14 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) goto sctp_flush_out; } + /* Apply Max.Burst limitation to the current transport in + * case it will be used for new data. We are going to + * rest it before we return, but we want to apply the limit + * to the currently queued data. + */ + if (transport) + sctp_transport_burst_limited(transport); + /* Finally, transmit new packets. */ while ((chunk = sctp_outq_dequeue_data(q)) != NULL) { /* RFC 2960 6.5 Every DATA chunk MUST carry a valid @@ -976,6 +984,10 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) packet = &transport->packet; sctp_packet_config(packet, vtag, asoc->peer.ecn_capable); + /* We've switched transports, so apply the + * Burst limit to the new transport. + */ + sctp_transport_burst_limited(transport); } SCTP_DEBUG_PRINTK("sctp_outq_flush(%p, %p[%s]), ", @@ -1070,6 +1082,9 @@ sctp_flush_out: packet = &t->packet; if (!sctp_packet_empty(packet)) error = sctp_packet_transmit(packet); + + /* Clear the burst limited state, if any */ + sctp_transport_burst_reset(t); } return error; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 2df29cbdaf5a..9a6cb22d129f 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -576,6 +576,43 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, transport->cwnd, transport->ssthresh); } +/* Apply Max.Burst limit to the congestion window: + * sctpimpguide-05 2.14.2 + * D) When the time comes for the sender to + * transmit new DATA chunks, the protocol parameter Max.Burst MUST + * first be applied to limit how many new DATA chunks may be sent. + * The limit is applied by adjusting cwnd as follows: + * if ((flightsize+ Max.Burst * MTU) < cwnd) + * cwnd = flightsize + Max.Burst * MTU + */ + +void sctp_transport_burst_limited(struct sctp_transport *t) +{ + struct sctp_association *asoc = t->asoc; + u32 old_cwnd = t->cwnd; + u32 max_burst_bytes; + + if (t->burst_limited) + return; + + max_burst_bytes = t->flight_size + (asoc->max_burst * asoc->pathmtu); + if (max_burst_bytes < old_cwnd) { + t->cwnd = max_burst_bytes; + t->burst_limited = old_cwnd; + } +} + +/* Restore the old cwnd congestion window, after the burst had it's + * desired effect. + */ +void sctp_transport_burst_reset(struct sctp_transport *t) +{ + if (t->burst_limited) { + t->cwnd = t->burst_limited; + t->burst_limited = 0; + } +} + /* What is the next timeout value for this transport? */ unsigned long sctp_transport_timeout(struct sctp_transport *t) { @@ -598,6 +635,7 @@ void sctp_transport_reset(struct sctp_transport *t) * (see Section 6.2.1) */ t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380)); + t->burst_limited = 0; t->ssthresh = asoc->peer.i.a_rwnd; t->last_rto = t->rto = asoc->rto_initial; t->rtt = 0; -- cgit v1.2.3-59-g8ed1b