From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- sound/isa/sscape.c | 1517 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1517 insertions(+) create mode 100644 sound/isa/sscape.c (limited to 'sound/isa/sscape.c') diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c new file mode 100644 index 000000000000..3959ed694eec --- /dev/null +++ b/sound/isa/sscape.c @@ -0,0 +1,1517 @@ +/* + * Low-level ALSA driver for the ENSONIQ SoundScape PnP + * Copyright (c) by Chris Rankin + * + * This driver was written in part using information obtained from + * the OSS/Free SoundScape driver, written by Hannu Savolainen. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +MODULE_AUTHOR("Chris Rankin"); +MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver"); +MODULE_LICENSE("GPL"); + +static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX; +static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR; +static long port[SNDRV_CARDS] __devinitdata = { [0 ... (SNDRV_CARDS-1)] = SNDRV_AUTO_PORT }; +static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; +static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ; +static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); + +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "Description for SoundScape card"); + +module_param_array(port, long, NULL, 0444); +MODULE_PARM_DESC(port, "Port # for SoundScape driver."); + +module_param_array(irq, int, NULL, 0444); +MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); + +module_param_array(mpu_irq, int, NULL, 0444); +MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); + +module_param_array(dma, int, NULL, 0444); +MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); + +#ifdef CONFIG_PNP +static struct pnp_card_device_id sscape_pnpids[] = { + { .id = "ENS3081", .devs = { { "ENS0000" } } }, + { .id = "" } /* end */ +}; + +MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); +#endif + +static snd_card_t *sscape_card[SNDRV_CARDS]; + + +#define MPU401_IO(i) ((i) + 0) +#define MIDI_DATA_IO(i) ((i) + 0) +#define MIDI_CTRL_IO(i) ((i) + 1) +#define HOST_CTRL_IO(i) ((i) + 2) +#define HOST_DATA_IO(i) ((i) + 3) +#define ODIE_ADDR_IO(i) ((i) + 4) +#define ODIE_DATA_IO(i) ((i) + 5) +#define CODEC_IO(i) ((i) + 8) + +#define IC_ODIE 1 +#define IC_OPUS 2 + +#define RX_READY 0x01 +#define TX_READY 0x02 + +#define CMD_ACK 0x80 +#define CMD_SET_MIDI_VOL 0x84 +#define CMD_GET_MIDI_VOL 0x85 +#define CMD_XXX_MIDI_VOL 0x86 +#define CMD_SET_EXTMIDI 0x8a +#define CMD_GET_EXTMIDI 0x8b +#define CMD_SET_MT32 0x8c +#define CMD_GET_MT32 0x8d + +enum GA_REG { + GA_INTSTAT_REG = 0, + GA_INTENA_REG, + GA_DMAA_REG, + GA_DMAB_REG, + GA_INTCFG_REG, + GA_DMACFG_REG, + GA_CDCFG_REG, + GA_SMCFGA_REG, + GA_SMCFGB_REG, + GA_HMCTL_REG +}; + +#define DMA_8BIT 0x80 + + +#define AD1845_FREQ_SEL_MSB 0x16 +#define AD1845_FREQ_SEL_LSB 0x17 + +struct soundscape { + spinlock_t lock; + unsigned io_base; + int codec_type; + int ic_type; + struct resource *io_res; + cs4231_t *chip; + mpu401_t *mpu; + snd_hwdep_t *hw; + + /* + * The MIDI device won't work until we've loaded + * its firmware via a hardware-dependent device IOCTL + */ + spinlock_t fwlock; + int hw_in_use; + unsigned long midi_usage; + unsigned char midi_vol; +}; + +#define INVALID_IRQ ((unsigned)-1) + + +static inline struct soundscape *get_card_soundscape(snd_card_t * c) +{ + return (struct soundscape *) (c->private_data); +} + +static inline struct soundscape *get_mpu401_soundscape(mpu401_t * mpu) +{ + return (struct soundscape *) (mpu->private_data); +} + +static inline struct soundscape *get_hwdep_soundscape(snd_hwdep_t * hw) +{ + return (struct soundscape *) (hw->private_data); +} + + +/* + * Allocates some kernel memory that we can use for DMA. + * I think this means that the memory has to map to + * contiguous pages of physical memory. + */ +static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size) +{ + if (buf) { + if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(), + size, buf) < 0) { + snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size); + return NULL; + } + } + + return buf; +} + +/* + * Release the DMA-able kernel memory ... + */ +static void free_dmabuf(struct snd_dma_buffer *buf) +{ + if (buf && buf->area) + snd_dma_free_pages(buf); +} + + +/* + * This function writes to the SoundScape's control registers, + * but doesn't do any locking. It's up to the caller to do that. + * This is why this function is "unsafe" ... + */ +static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val) +{ + outb(reg, ODIE_ADDR_IO(io_base)); + outb(val, ODIE_DATA_IO(io_base)); +} + +/* + * Write to the SoundScape's control registers, and do the + * necessary locking ... + */ +static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + sscape_write_unsafe(s->io_base, reg, val); + spin_unlock_irqrestore(&s->lock, flags); +} + +/* + * Read from the SoundScape's control registers, but leave any + * locking to the caller. This is why the function is "unsafe" ... + */ +static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg) +{ + outb(reg, ODIE_ADDR_IO(io_base)); + return inb(ODIE_DATA_IO(io_base)); +} + +/* + * Puts the SoundScape into "host" mode, as compared to "MIDI" mode + */ +static inline void set_host_mode_unsafe(unsigned io_base) +{ + outb(0x0, HOST_CTRL_IO(io_base)); +} + +/* + * Puts the SoundScape into "MIDI" mode, as compared to "host" mode + */ +static inline void set_midi_mode_unsafe(unsigned io_base) +{ + outb(0x3, HOST_CTRL_IO(io_base)); +} + +/* + * Read the SoundScape's host-mode control register, but leave + * any locking issues to the caller ... + */ +static inline int host_read_unsafe(unsigned io_base) +{ + int data = -1; + if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) { + data = inb(HOST_DATA_IO(io_base)); + } + + return data; +} + +/* + * Read the SoundScape's host-mode control register, performing + * a limited amount of busy-waiting if the register isn't ready. + * Also leaves all locking-issues to the caller ... + */ +static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout) +{ + int data; + + while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) { + udelay(100); + --timeout; + } /* while */ + + return data; +} + +/* + * Write to the SoundScape's host-mode control registers, but + * leave any locking issues to the caller ... + */ +static inline int host_write_unsafe(unsigned io_base, unsigned char data) +{ + if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) { + outb(data, HOST_DATA_IO(io_base)); + return 1; + } + + return 0; +} + +/* + * Write to the SoundScape's host-mode control registers, performing + * a limited amount of busy-waiting if the register isn't ready. + * Also leaves all locking-issues to the caller ... + */ +static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, + unsigned timeout) +{ + int err; + + while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) { + udelay(100); + --timeout; + } /* while */ + + return err; +} + + +/* + * Check that the MIDI subsystem is operational. If it isn't, + * then we will hang the computer if we try to use it ... + * + * NOTE: This check is based upon observation, not documentation. + */ +static inline int verify_mpu401(const mpu401_t * mpu) +{ + return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80); +} + +/* + * This is apparently the standard way to initailise an MPU-401 + */ +static inline void initialise_mpu401(const mpu401_t * mpu) +{ + outb(0, MIDI_DATA_IO(mpu->port)); +} + +/* + * Tell the SoundScape to activate the AD1845 chip (I think). + * The AD1845 detection fails if we *don't* do this, so I + * think that this is a good idea ... + */ +static inline void activate_ad1845_unsafe(unsigned io_base) +{ + sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10); + sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80); +} + +/* + * Do the necessary ALSA-level cleanup to deallocate our driver ... + */ +static void soundscape_free(snd_card_t * c) +{ + register struct soundscape *sscape = get_card_soundscape(c); + release_resource(sscape->io_res); + kfree_nocheck(sscape->io_res); + free_dma(sscape->chip->dma1); +} + +/* + * Put this process into an idle wait-state for a certain number + * of "jiffies". The process can almost certainly be rescheduled + * while we're waiting, and so we must NOT be holding any spinlocks + * when we call this function. If we are then we risk DEADLOCK in + * SMP (Ha!) or pre-emptible kernels. + */ +static inline void sleep(long jiffs, int state) +{ + set_current_state(state); + schedule_timeout(jiffs); +} + +/* + * Tell the SoundScape to begin a DMA tranfer using the given channel. + * All locking issues are left to the caller. + */ +static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg) +{ + sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01); + sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe); +} + +/* + * Wait for a DMA transfer to complete. This is a "limited busy-wait", + * and all locking issues are left to the caller. + */ +static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout) +{ + while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) { + udelay(100); + --timeout; + } /* while */ + + return (sscape_read_unsafe(io_base, reg) & 0x01); +} + +/* + * Wait for the On-Board Processor to return its start-up + * acknowledgement sequence. This wait is too long for + * us to perform "busy-waiting", and so we must sleep. + * This in turn means that we must not be holding any + * spinlocks when we call this function. + */ +static int obp_startup_ack(struct soundscape *s, unsigned timeout) +{ + while (timeout != 0) { + unsigned long flags; + unsigned char x; + + sleep(1, TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&s->lock, flags); + x = inb(HOST_DATA_IO(s->io_base)); + spin_unlock_irqrestore(&s->lock, flags); + if ((x & 0xfe) == 0xfe) + return 1; + + --timeout; + } /* while */ + + return 0; +} + +/* + * Wait for the host to return its start-up acknowledgement + * sequence. This wait is too long for us to perform + * "busy-waiting", and so we must sleep. This in turn means + * that we must not be holding any spinlocks when we call + * this function. + */ +static int host_startup_ack(struct soundscape *s, unsigned timeout) +{ + while (timeout != 0) { + unsigned long flags; + unsigned char x; + + sleep(1, TASK_INTERRUPTIBLE); + + spin_lock_irqsave(&s->lock, flags); + x = inb(HOST_DATA_IO(s->io_base)); + spin_unlock_irqrestore(&s->lock, flags); + if (x == 0xfe) + return 1; + + --timeout; + } /* while */ + + return 0; +} + +/* + * Upload a byte-stream into the SoundScape using DMA channel A. + */ +static int upload_dma_data(struct soundscape *s, + const unsigned char __user *data, + size_t size) +{ + unsigned long flags; + struct snd_dma_buffer dma; + int ret; + + if (!get_dmabuf(&dma, PAGE_ALIGN(size))) + return -ENOMEM; + + spin_lock_irqsave(&s->lock, flags); + + /* + * Reset the board ... + */ + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f); + + /* + * Enable the DMA channels and configure them ... + */ + sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50); + sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT); + sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20); + + /* + * Take the board out of reset ... + */ + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80); + + /* + * Upload the user's data (firmware?) to the SoundScape + * board through the DMA channel ... + */ + while (size != 0) { + unsigned long len; + + /* + * Apparently, copying to/from userspace can sleep. + * We are therefore forbidden from holding any + * spinlocks while we copy ... + */ + spin_unlock_irqrestore(&s->lock, flags); + + /* + * Remember that the data that we want to DMA + * comes from USERSPACE. We have already verified + * the userspace pointer ... + */ + len = min(size, dma.bytes); + len -= __copy_from_user(dma.area, data, len); + data += len; + size -= len; + + /* + * Grab that spinlock again, now that we've + * finished copying! + */ + spin_lock_irqsave(&s->lock, flags); + + snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE); + sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG); + if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) { + /* + * Don't forget to release this spinlock we're holding ... + */ + spin_unlock_irqrestore(&s->lock, flags); + + snd_printk(KERN_ERR "sscape: DMA upload has timed out\n"); + ret = -EAGAIN; + goto _release_dma; + } + } /* while */ + + set_host_mode_unsafe(s->io_base); + + /* + * Boot the board ... (I think) + */ + sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40); + spin_unlock_irqrestore(&s->lock, flags); + + /* + * If all has gone well, then the board should acknowledge + * the new upload and tell us that it has rebooted OK. We + * give it 5 seconds (max) ... + */ + ret = 0; + if (!obp_startup_ack(s, 5)) { + snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n"); + ret = -EAGAIN; + } else if (!host_startup_ack(s, 5)) { + snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n"); + ret = -EAGAIN; + } + + _release_dma: + /* + * NOTE!!! We are NOT holding any spinlocks at this point !!! + */ + sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40)); + free_dmabuf(&dma); + + return ret; +} + +/* + * Upload the bootblock(?) into the SoundScape. The only + * purpose of this block of code seems to be to tell + * us which version of the microcode we should be using. + * + * NOTE: The boot-block data resides in USER-SPACE!!! + * However, we have already verified its memory + * addresses by the time we get here. + */ +static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb) +{ + unsigned long flags; + int data = 0; + int ret; + + ret = upload_dma_data(sscape, bb->code, sizeof(bb->code)); + + spin_lock_irqsave(&sscape->lock, flags); + if (ret == 0) { + data = host_read_ctrl_unsafe(sscape->io_base, 100); + } + set_midi_mode_unsafe(sscape->io_base); + spin_unlock_irqrestore(&sscape->lock, flags); + + if (ret == 0) { + if (data < 0) { + snd_printk(KERN_ERR "sscape: timeout reading firmware version\n"); + ret = -EAGAIN; + } + else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) { + ret = -EFAULT; + } + } + + return ret; +} + +/* + * Upload the microcode into the SoundScape. The + * microcode is 64K of data, and if we try to copy + * it into a local variable then we will SMASH THE + * KERNEL'S STACK! We therefore leave it in USER + * SPACE, and save ourselves from copying it at all. + */ +static int sscape_upload_microcode(struct soundscape *sscape, + const struct sscape_microcode __user *mc) +{ + unsigned long flags; + char __user *code; + int err; + + /* + * We are going to have to copy this data into a special + * DMA-able buffer before we can upload it. We shall therefore + * just check that the data pointer is valid for now. + * + * NOTE: This buffer is 64K long! That's WAY too big to + * copy into a stack-temporary anyway. + */ + if ( get_user(code, &mc->code) || + !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) ) + return -EFAULT; + + if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) { + snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n"); + } + + spin_lock_irqsave(&sscape->lock, flags); + set_midi_mode_unsafe(sscape->io_base); + spin_unlock_irqrestore(&sscape->lock, flags); + + initialise_mpu401(sscape->mpu); + + return err; +} + +/* + * Hardware-specific device functions, to implement special + * IOCTLs for the SoundScape card. This is how we upload + * the microcode into the card, for example, and so we + * must ensure that no two processes can open this device + * simultaneously, and that we can't open it at all if + * someone is using the MIDI device. + */ +static int sscape_hw_open(snd_hwdep_t * hw, struct file *file) +{ + register struct soundscape *sscape = get_hwdep_soundscape(hw); + unsigned long flags; + int err; + + spin_lock_irqsave(&sscape->fwlock, flags); + + if ((sscape->midi_usage != 0) || sscape->hw_in_use) { + err = -EBUSY; + } else { + sscape->hw_in_use = 1; + err = 0; + } + + spin_unlock_irqrestore(&sscape->fwlock, flags); + return err; +} + +static int sscape_hw_release(snd_hwdep_t * hw, struct file *file) +{ + register struct soundscape *sscape = get_hwdep_soundscape(hw); + unsigned long flags; + + spin_lock_irqsave(&sscape->fwlock, flags); + sscape->hw_in_use = 0; + spin_unlock_irqrestore(&sscape->fwlock, flags); + return 0; +} + +static int sscape_hw_ioctl(snd_hwdep_t * hw, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct soundscape *sscape = get_hwdep_soundscape(hw); + int err = -EBUSY; + + switch (cmd) { + case SND_SSCAPE_LOAD_BOOTB: + { + register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg; + + /* + * We are going to have to copy this data into a special + * DMA-able buffer before we can upload it. We shall therefore + * just check that the data pointer is valid for now ... + */ + if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) ) + return -EFAULT; + + /* + * Now check that we can write the firmware version number too... + */ + if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) ) + return -EFAULT; + + err = sscape_upload_bootblock(sscape, bb); + } + break; + + case SND_SSCAPE_LOAD_MCODE: + { + register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg; + + err = sscape_upload_microcode(sscape, mc); + } + break; + + default: + err = -EINVAL; + break; + } /* switch */ + + return err; +} + + +/* + * Mixer control for the SoundScape's MIDI device. + */ +static int sscape_midi_info(snd_kcontrol_t * ctl, + snd_ctl_elem_info_t * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 127; + return 0; +} + +static int sscape_midi_get(snd_kcontrol_t * kctl, + snd_ctl_elem_value_t * uctl) +{ + cs4231_t *chip = snd_kcontrol_chip(kctl); + snd_card_t *card = chip->card; + register struct soundscape *s = get_card_soundscape(card); + unsigned long flags; + + spin_lock_irqsave(&s->lock, flags); + set_host_mode_unsafe(s->io_base); + + if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) { + uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100); + } + + set_midi_mode_unsafe(s->io_base); + spin_unlock_irqrestore(&s->lock, flags); + return 0; +} + +static int sscape_midi_put(snd_kcontrol_t * kctl, + snd_ctl_elem_value_t * uctl) +{ + cs4231_t *chip = snd_kcontrol_chip(kctl); + snd_card_t *card = chip->card; + register struct soundscape *s = get_card_soundscape(card); + unsigned long flags; + int change; + + spin_lock_irqsave(&s->lock, flags); + + /* + * We need to put the board into HOST mode before we + * can send any volume-changing HOST commands ... + */ + set_host_mode_unsafe(s->io_base); + + /* + * To successfully change the MIDI volume setting, you seem to + * have to write a volume command, write the new volume value, + * and then perform another volume-related command. Perhaps the + * first command is an "open" and the second command is a "close"? + */ + if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { + change = 0; + goto __skip_change; + } + change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) + && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) + && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); + __skip_change: + + /* + * Take the board out of HOST mode and back into MIDI mode ... + */ + set_midi_mode_unsafe(s->io_base); + + spin_unlock_irqrestore(&s->lock, flags); + return change; +} + +static snd_kcontrol_new_t midi_mixer_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "MIDI", + .info = sscape_midi_info, + .get = sscape_midi_get, + .put = sscape_midi_put +}; + +/* + * The SoundScape can use two IRQs from a possible set of four. + * These IRQs are encoded as bit patterns so that they can be + * written to the control registers. + */ +static unsigned __devinit get_irq_config(int irq) +{ + static const int valid_irq[] = { 9, 5, 7, 10 }; + unsigned cfg; + + for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) { + if (irq == valid_irq[cfg]) + return cfg; + } /* for */ + + return INVALID_IRQ; +} + + +/* + * Perform certain arcane port-checks to see whether there + * is a SoundScape board lurking behind the given ports. + */ +static int __devinit detect_sscape(struct soundscape *s) +{ + unsigned long flags; + unsigned d; + int retval = 0; + + spin_lock_irqsave(&s->lock, flags); + + /* + * The following code is lifted from the original OSS driver, + * and as I don't have a datasheet I cannot really comment + * on what it is doing... + */ + if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0) + goto _done; + + d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0; + if ((d & 0x80) != 0) + goto _done; + + if (d == 0) { + s->codec_type = 1; + s->ic_type = IC_ODIE; + } else if ((d & 0x60) != 0) { + s->codec_type = 2; + s->ic_type = IC_OPUS; + } else + goto _done; + + outb(0xfa, ODIE_ADDR_IO(s->io_base)); + if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a) + goto _done; + + outb(0xfe, ODIE_ADDR_IO(s->io_base)); + if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e) + goto _done; + if ((inb(ODIE_DATA_IO(s->io_base)) & 0x9f) != 0x0e) + goto _done; + + /* + * SoundScape successfully detected! + */ + retval = 1; + + _done: + spin_unlock_irqrestore(&s->lock, flags); + return retval; +} + +/* + * ALSA callback function, called when attempting to open the MIDI device. + * Check that the MIDI firmware has been loaded, because we don't want + * to crash the machine. Also check that someone isn't using the hardware + * IOCTL device. + */ +static int mpu401_open(mpu401_t * mpu) +{ + int err; + + if (!verify_mpu401(mpu)) { + snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n"); + err = -ENODEV; + } else { + register struct soundscape *sscape = get_mpu401_soundscape(mpu); + unsigned long flags; + + spin_lock_irqsave(&sscape->fwlock, flags); + + if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) { + err = -EBUSY; + } else { + ++(sscape->midi_usage); + err = 0; + } + + spin_unlock_irqrestore(&sscape->fwlock, flags); + } + + return err; +} + +static void mpu401_close(mpu401_t * mpu) +{ + register struct soundscape *sscape = get_mpu401_soundscape(mpu); + unsigned long flags; + + spin_lock_irqsave(&sscape->fwlock, flags); + --(sscape->midi_usage); + spin_unlock_irqrestore(&sscape->fwlock, flags); +} + +/* + * Initialse an MPU-401 subdevice for MIDI support on the SoundScape. + */ +static int __devinit create_mpu401(snd_card_t * card, int devnum, unsigned long port, int irq) +{ + struct soundscape *sscape = get_card_soundscape(card); + snd_rawmidi_t *rawmidi; + int err; + +#define MPU401_SHARE_HARDWARE 1 + if ((err = snd_mpu401_uart_new(card, devnum, + MPU401_HW_MPU401, + port, MPU401_SHARE_HARDWARE, + irq, SA_INTERRUPT, + &rawmidi)) == 0) { + mpu401_t *mpu = (mpu401_t *) rawmidi->private_data; + mpu->open_input = mpu401_open; + mpu->open_output = mpu401_open; + mpu->close_input = mpu401_close; + mpu->close_output = mpu401_close; + mpu->private_data = sscape; + sscape->mpu = mpu; + + initialise_mpu401(mpu); + } + + return err; +} + + +/* + * Override for the CS4231 playback format function. + * The AD1845 has much simpler format and rate selection. + */ +static void ad1845_playback_format(cs4231_t * chip, snd_pcm_hw_params_t * params, unsigned char format) +{ + unsigned long flags; + unsigned rate = params_rate(params); + + /* + * The AD1845 can't handle sample frequencies + * outside of 4 kHZ to 50 kHZ + */ + if (rate > 50000) + rate = 50000; + else if (rate < 4000) + rate = 4000; + + spin_lock_irqsave(&chip->reg_lock, flags); + + /* + * Program the AD1845 correctly for the playback stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + snd_cs4231_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); + snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); + snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); + + spin_unlock_irqrestore(&chip->reg_lock, flags); +} + +/* + * Override for the CS4231 capture format function. + * The AD1845 has much simpler format and rate selection. + */ +static void ad1845_capture_format(cs4231_t * chip, snd_pcm_hw_params_t * params, unsigned char format) +{ + unsigned long flags; + unsigned rate = params_rate(params); + + /* + * The AD1845 can't handle sample frequencies + * outside of 4 kHZ to 50 kHZ + */ + if (rate > 50000) + rate = 50000; + else if (rate < 4000) + rate = 4000; + + spin_lock_irqsave(&chip->reg_lock, flags); + + /* + * Program the AD1845 correctly for the playback stream. + * Note that we do NOT need to toggle the MCE bit because + * the CAPTURE_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + snd_cs4231_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); + snd_cs4231_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); + snd_cs4231_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); + + spin_unlock_irqrestore(&chip->reg_lock, flags); +} + +/* + * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 + * is very much like a CS4231, with a few extra bits. We will + * try to support at least some of the extra bits by overriding + * some of the CS4231 callback. + */ +static int __devinit create_ad1845(snd_card_t * card, unsigned port, int irq, int dma1) +{ + register struct soundscape *sscape = get_card_soundscape(card); + cs4231_t *chip; + int err; + +#define CS4231_SHARE_HARDWARE (CS4231_HWSHARE_DMA1 | CS4231_HWSHARE_DMA2) + /* + * The AD1845 PCM device is only half-duplex, and so + * we only give it one DMA channel ... + */ + if ((err = snd_cs4231_create(card, + port, -1, irq, dma1, dma1, + CS4231_HW_DETECT, + CS4231_HWSHARE_DMA1, &chip)) == 0) { + unsigned long flags; + snd_pcm_t *pcm; + +#define AD1845_FREQ_SEL_ENABLE 0x08 + +#define AD1845_PWR_DOWN_CTRL 0x1b +#define AD1845_CRYS_CLOCK_SEL 0x1d + +/* + * It turns out that the PLAYBACK_ENABLE bit is set + * by the lowlevel driver ... + * +#define AD1845_IFACE_CONFIG \ + (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE) + snd_cs4231_mce_up(chip); + spin_lock_irqsave(&chip->reg_lock, flags); + snd_cs4231_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG); + spin_unlock_irqrestore(&chip->reg_lock, flags); + snd_cs4231_mce_down(chip); + */ + + /* + * The input clock frequency on the SoundScape must + * be 14.31818 MHz, because we must set this register + * to get the playback to sound correct ... + */ + snd_cs4231_mce_up(chip); + spin_lock_irqsave(&chip->reg_lock, flags); + snd_cs4231_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); + spin_unlock_irqrestore(&chip->reg_lock, flags); + snd_cs4231_mce_down(chip); + + /* + * More custom configuration: + * a) select "mode 2", and provide a current drive of 8 mA + * b) enable frequency selection (for capture/playback) + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_cs4231_out(chip, CS4231_MISC_INFO, (CS4231_MODE2 | 0x10)); + snd_cs4231_out(chip, AD1845_PWR_DOWN_CTRL, snd_cs4231_in(chip, AD1845_PWR_DOWN_CTRL) | AD1845_FREQ_SEL_ENABLE); + spin_unlock_irqrestore(&chip->reg_lock, flags); + + if ((err = snd_cs4231_pcm(chip, 0, &pcm)) < 0) { + snd_printk(KERN_ERR "sscape: No PCM device for AD1845 chip\n"); + goto _error; + } + + if ((err = snd_cs4231_mixer(chip)) < 0) { + snd_printk(KERN_ERR "sscape: No mixer device for AD1845 chip\n"); + goto _error; + } + + if ((err = snd_ctl_add(card, snd_ctl_new1(&midi_mixer_ctl, chip))) < 0) { + snd_printk(KERN_ERR "sscape: Could not create MIDI mixer control\n"); + goto _error; + } + + strcpy(card->driver, "SoundScape"); + strcpy(card->shortname, pcm->name); + snprintf(card->longname, sizeof(card->longname), + "%s at 0x%lx, IRQ %d, DMA %d\n", + pcm->name, chip->port, chip->irq, chip->dma1); + chip->set_playback_format = ad1845_playback_format; + chip->set_capture_format = ad1845_capture_format; + sscape->chip = chip; + } + + _error: + return err; +} + + +struct params +{ + int index; + const char *id; + unsigned port; + int irq; + int mpu_irq; + int dma1; +}; + + +static inline struct params* +init_params(struct params *params, + int index, + const char *id, + unsigned port, + int irq, + int mpu_irq, + int dma1) +{ + params->index = index; + params->id = id; + params->port = port; + params->irq = irq; + params->mpu_irq = mpu_irq; + params->dma1 = (dma1 & 0x03); + + return params; +} + + +/* + * Create an ALSA soundcard entry for the SoundScape, using + * the given list of port, IRQ and DMA resources. + */ +static int __devinit create_sscape(const struct params *params, snd_card_t **rcardp) +{ + snd_card_t *card; + register struct soundscape *sscape; + register unsigned dma_cfg; + unsigned irq_cfg; + unsigned mpu_irq_cfg; + struct resource *io_res; + unsigned long flags; + int err; + + /* + * Check that the user didn't pass us garbage data ... + */ + irq_cfg = get_irq_config(params->irq); + if (irq_cfg == INVALID_IRQ) { + snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", params->irq); + return -ENXIO; + } + + mpu_irq_cfg = get_irq_config(params->mpu_irq); + if (mpu_irq_cfg == INVALID_IRQ) { + printk(KERN_ERR "sscape: Invalid IRQ %d\n", params->mpu_irq); + return -ENXIO; + } + + /* + * Grab IO ports that we will need to probe so that we + * can detect and control this hardware ... + */ + if ((io_res = request_region(params->port, 8, "SoundScape")) == NULL) { + snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", params->port); + return -EBUSY; + } + + /* + * Grab both DMA channels (OK, only one for now) ... + */ + if ((err = request_dma(params->dma1, "SoundScape")) < 0) { + snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", params->dma1); + goto _release_region; + } + + /* + * Create a new ALSA sound card entry, in anticipation + * of detecting our hardware ... + */ + if ((card = snd_card_new(params->index, params->id, THIS_MODULE, sizeof(struct soundscape))) == NULL) { + err = -ENOMEM; + goto _release_dma; + } + + sscape = get_card_soundscape(card); + spin_lock_init(&sscape->lock); + spin_lock_init(&sscape->fwlock); + sscape->io_res = io_res; + sscape->io_base = params->port; + + if (!detect_sscape(sscape)) { + printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); + err = -ENODEV; + goto _release_card; + } + + printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n", + sscape->io_base, params->irq, params->dma1); + + /* + * Now create the hardware-specific device so that we can + * load the microcode into the on-board processor. + * We cannot use the MPU-401 MIDI system until this firmware + * has been loaded into the card. + */ + if ((err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw))) < 0) { + printk(KERN_ERR "sscape: Failed to create firmware device\n"); + goto _release_card; + } + strlcpy(sscape->hw->name, "SoundScape M68K", sizeof(sscape->hw->name)); + sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0'; + sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE; + sscape->hw->ops.open = sscape_hw_open; + sscape->hw->ops.release = sscape_hw_release; + sscape->hw->ops.ioctl = sscape_hw_ioctl; + sscape->hw->private_data = sscape; + + /* + * Tell the on-board devices where their resources are (I think - + * I can't be sure without a datasheet ... So many magic values!) + */ + spin_lock_irqsave(&sscape->lock, flags); + + activate_ad1845_unsafe(sscape->io_base); + + sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */ + sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e); + sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00); + + /* + * Enable and configure the DMA channels ... + */ + sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50); + dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40); + sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg); + sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20); + + sscape_write_unsafe(sscape->io_base, + GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg); + sscape_write_unsafe(sscape->io_base, + GA_CDCFG_REG, 0x09 | DMA_8BIT | (params->dma1 << 4) | (irq_cfg << 1)); + + spin_unlock_irqrestore(&sscape->lock, flags); + + /* + * We have now enabled the codec chip, and so we should + * detect the AD1845 device ... + */ + if ((err = create_ad1845(card, CODEC_IO(params->port), params->irq, params->dma1)) < 0) { + printk(KERN_ERR "sscape: No AD1845 device at 0x%x, IRQ %d\n", + CODEC_IO(params->port), params->irq); + goto _release_card; + } +#define MIDI_DEVNUM 0 + if ((err = create_mpu401(card, MIDI_DEVNUM, MPU401_IO(params->port), params->mpu_irq)) < 0) { + printk(KERN_ERR "sscape: Failed to create MPU-401 device at 0x%x\n", + MPU401_IO(params->port)); + goto _release_card; + } + + /* + * Enable the master IRQ ... + */ + sscape_write(sscape, GA_INTENA_REG, 0x80); + + if ((err = snd_card_register(card)) < 0) { + printk(KERN_ERR "sscape: Failed to register sound card\n"); + goto _release_card; + } + + /* + * Initialize mixer + */ + sscape->midi_vol = 0; + host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); + host_write_ctrl_unsafe(sscape->io_base, 0, 100); + host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100); + + /* + * Now that we have successfully created this sound card, + * it is safe to store the pointer. + * NOTE: we only register the sound card's "destructor" + * function now that our "constructor" has completed. + */ + card->private_free = soundscape_free; + *rcardp = card; + + return 0; + + _release_card: + snd_card_free(card); + + _release_dma: + free_dma(params->dma1); + + _release_region: + release_resource(io_res); + kfree_nocheck(io_res); + + return err; +} + + +static int sscape_cards __devinitdata; +static struct params sscape_params[SNDRV_CARDS] __devinitdata; + +#ifdef CONFIG_PNP +static inline int __devinit get_next_autoindex(int i) +{ + while ((i < SNDRV_CARDS) && (port[i] != SNDRV_AUTO_PORT)) { + ++i; + } /* while */ + + return i; +} + + +static inline int __devinit is_port_known(unsigned io, struct params *params, int cards) +{ + while (--cards >= 0) { + if (params[cards].port == io) + return 1; + } /* while */ + + return 0; +} + +static int __devinit sscape_pnp_detect(struct pnp_card_link *pcard, + const struct pnp_card_device_id *pid) +{ + struct pnp_dev *dev; + static int idx = 0; + int ret; + + /* + * Allow this function to fail *quietly* if all the ISA PnP + * devices were configured using module parameters instead. + */ + if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS) { + return -ENOSPC; + } + + /* + * We have found a candidate ISA PnP card. Now we + * have to check that it has the devices that we + * expect it to have. + * + * We will NOT try and autoconfigure all of the resources + * needed and then activate the card as we are assuming that + * has already been done at boot-time using /proc/isapnp. + * We shall simply try to give each active card the resources + * that it wants. This is a sensible strategy for a modular + * system where unused modules are unloaded regularly. + * + * This strategy is utterly useless if we compile the driver + * into the kernel, of course. + */ + // printk(KERN_INFO "sscape: %s\n", card->name); + + /* + * Check that we still have room for another sound card ... + */ + if (sscape_cards >= SNDRV_CARDS) { + printk(KERN_ERR "sscape: No room for another ALSA device\n"); + return -ENOSPC; + } + + ret = -ENODEV; + + dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL); + if (dev) { + struct params *this; + if (!pnp_is_active(dev)) { + if (pnp_activate_dev(dev) < 0) { + printk(KERN_INFO "sscape: device is inactive\n"); + return -EBUSY; + } + } + /* + * Read the correct parameters off the ISA PnP bus ... + */ + this = init_params(&sscape_params[sscape_cards], + index[idx], + id[idx], + pnp_port_start(dev, 0), + pnp_irq(dev, 0), + pnp_irq(dev, 1), + pnp_dma(dev, 0)); + + /* + * Do we know about this sound card already? + */ + if ( !is_port_known(this->port, sscape_params, sscape_cards) ) { + snd_card_t *card; + + ret = create_sscape(this, &card); + if (ret < 0) + return ret; + snd_card_set_dev(card, &pcard->card->dev); + pnp_set_card_drvdata(pcard, card); + ++sscape_cards; + ++idx; + } + } + + return ret; +} + +static void __devexit sscape_pnp_remove(struct pnp_card_link * pcard) +{ + snd_card_t *card = (snd_card_t *) pnp_get_card_drvdata(pcard); + + pnp_set_card_drvdata(pcard, NULL); + snd_card_disconnect(card); + snd_card_free_in_thread(card); +} + +static struct pnp_card_driver sscape_pnpc_driver = { + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + .name = "sscape", + .id_table = sscape_pnpids, + .probe = sscape_pnp_detect, + .remove = __devexit_p(sscape_pnp_remove), +}; + +#endif /* CONFIG_PNP */ + +static int __init sscape_manual_probe(struct params *params) +{ + int ret; + unsigned i; + snd_card_t *card; + + for (i = 0; i < SNDRV_CARDS; ++i) { + /* + * We do NOT probe for ports. + * If we're not given a port number for this + * card then we completely ignore this line + * of parameters. + */ + if (port[i] == SNDRV_AUTO_PORT) + continue; + + /* + * Make sure we were given ALL of the other parameters. + */ + if ( (irq[i] == SNDRV_AUTO_IRQ) || + (mpu_irq[i] == SNDRV_AUTO_IRQ) || + (dma[i] == SNDRV_AUTO_DMA) ) { + printk(KERN_INFO + "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n"); + return -ENXIO; + } + + /* + * This cards looks OK ... + */ + init_params(params, index[i], id[i], port[i], irq[i], mpu_irq[i], dma[i]); + + ret = create_sscape(params, &card); + if (ret < 0) + return ret; + + sscape_card[sscape_cards] = card; + params++; + sscape_cards++; + } /* for */ + + return 0; +} + + +static void sscape_exit(void) +{ + unsigned i; + +#ifdef CONFIG_PNP + pnp_unregister_card_driver(&sscape_pnpc_driver); +#endif + for (i = 0; i < ARRAY_SIZE(sscape_card); ++i) { + snd_card_free(sscape_card[i]); + } /* for */ +} + + +static int __init sscape_init(void) +{ + int ret; + + /* + * First check whether we were passed any parameters. + * These MUST take precedence over ANY automatic way + * of allocating cards, because the operator is + * S-P-E-L-L-I-N-G it out for us... + */ + ret = sscape_manual_probe(sscape_params); + if (ret < 0) { + int i; + for (i = 0; i < sscape_cards; ++i) + snd_card_free(sscape_card[i]); + return ret; + } + +#ifdef CONFIG_PNP + if (sscape_cards < SNDRV_CARDS) { + ret = pnp_register_card_driver(&sscape_pnpc_driver); + if (ret < 0) { + sscape_exit(); + return ret; + } + } +#endif + + return 0; +} + +module_init(sscape_init); +module_exit(sscape_exit); -- cgit v1.2.3-59-g8ed1b