From 13769e3f21d6e9c59999c9bf6908278b878d05c5 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Wed, 17 May 2006 11:03:16 +0200 Subject: [ALSA] azt3328.c: add 3D sound mixer switch/rename controls - add 3D sound pre-3D/post-3D switch, as seen in standard AC-97 - rename controls to shorter and more accurate strings Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai --- sound/pci/azt3328.c | 41 +++++++++++++++++++++++++++++++---------- sound/pci/azt3328.h | 16 ++++++++-------- 2 files changed, 39 insertions(+), 18 deletions(-) (limited to 'sound/pci') diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index f197fbac10ab..c9af04ed200f 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -39,8 +39,15 @@ * for compatibility reasons) has the following features: * * - builtin AC97 conformant codec (SNR over 80dB) - * (really AC97 compliant?? I really doubt it when looking - * at the mixer register layout) + * Note that "conformant" != "compliant"!! this chip's mixer register layout + * *differs* from the standard AC97 layout: + * they chose to not implement the headphone register (which is not a + * problem since it's merely optional), yet when doing this, they committed + * the grave sin of letting other registers follow immediately instead of + * keeping a headphone dummy register, thereby shifting the mixer register + * addresses illegally. So far unfortunately it looks like the very flexible + * ALSA AC97 support is still not enough to easily compensate for such a + * grave layout violation despite all tweaks and quirks mechanisms it offers. * - builtin genuine OPL3 * - full duplex 16bit playback/record at independent sampling rate * - MPU401 (+ legacy address support) FIXME: how to enable legacy addr?? @@ -96,6 +103,9 @@ * The standard suspend/resume functionality could probably make use of * some improvement, too... * - figure out what all unknown port bits are responsible for + * - figure out some cleverly evil scheme to possibly make ALSA AC97 code + * fully accept our quite incompatible ""AC97"" mixer and thus save some + * code (but I'm not too optimistic that doing this is possible at all) */ #include @@ -526,15 +536,18 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { static const char * const texts1[] = { - "ModemOut1", "ModemOut2" + "Mic1", "Mic2" }; static const char * const texts2[] = { - "MonoSelectSource1", "MonoSelectSource2" + "Mix", "Mic" }; static const char * const texts3[] = { "Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone" }; + static const char * const texts4[] = { + "pre 3D", "post 3D" + }; struct azf3328_mixer_reg reg; snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); @@ -545,10 +558,17 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, uinfo->value.enumerated.item = reg.enum_c - 1U; if (reg.reg == IDX_MIXER_ADVCTL2) { - if (reg.lchan_shift == 8) /* modem out sel */ + switch(reg.lchan_shift) { + case 8: /* modem out sel */ strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]); - else /* mono sel source */ + break; + case 9: /* mono sel source */ strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]); + break; + case 15: /* PCM Out Path */ + strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]); + break; + } } else strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item] @@ -641,13 +661,14 @@ static const struct snd_kcontrol_new snd_azf3328_mixer_controls[] __devinitdata AZF3328_MIXER_VOL_MONO("Modem Playback Volume", IDX_MIXER_MODEMOUT, 0x1f, 1), AZF3328_MIXER_SWITCH("Modem Capture Switch", IDX_MIXER_MODEMIN, 15, 1), AZF3328_MIXER_VOL_MONO("Modem Capture Volume", IDX_MIXER_MODEMIN, 0x1f, 1), - AZF3328_MIXER_ENUM("Modem Out Select", IDX_MIXER_ADVCTL2, 2, 8), - AZF3328_MIXER_ENUM("Mono Select Source", IDX_MIXER_ADVCTL2, 2, 9), + AZF3328_MIXER_ENUM("Mic Select", IDX_MIXER_ADVCTL2, 2, 8), + AZF3328_MIXER_ENUM("Mono Output Select", IDX_MIXER_ADVCTL2, 2, 9), + AZF3328_MIXER_ENUM("PCM", IDX_MIXER_ADVCTL2, 2, 15), /* PCM Out Path, place in front since it controls *both* 3D and Bass/Treble! */ AZF3328_MIXER_VOL_SPECIAL("Tone Control - Treble", IDX_MIXER_BASSTREBLE, 0x07, 1, 0), AZF3328_MIXER_VOL_SPECIAL("Tone Control - Bass", IDX_MIXER_BASSTREBLE, 0x07, 9, 0), AZF3328_MIXER_SWITCH("3D Control - Switch", IDX_MIXER_ADVCTL2, 13, 0), - AZF3328_MIXER_VOL_SPECIAL("3D Control - Wide", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */ - AZF3328_MIXER_VOL_SPECIAL("3D Control - Space", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */ + AZF3328_MIXER_VOL_SPECIAL("3D Control - Width", IDX_MIXER_ADVCTL1, 0x07, 1, 0), /* "3D Width" */ + AZF3328_MIXER_VOL_SPECIAL("3D Control - Depth", IDX_MIXER_ADVCTL1, 0x03, 8, 0), /* "Hifi 3D" */ #if MIXER_TESTING AZF3328_MIXER_SWITCH("0", IDX_MIXER_ADVCTL2, 0, 0), AZF3328_MIXER_SWITCH("1", IDX_MIXER_ADVCTL2, 1, 0), diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h index 560a4653c0b2..b4f3e3cd006b 100644 --- a/sound/pci/azt3328.h +++ b/sound/pci/azt3328.h @@ -90,7 +90,7 @@ #define IDX_IO_REC_DMA_CURROFS 0x34 /* PU:0x00000000 */ #define IDX_IO_REC_SOUNDFORMAT 0x36 /* PU:0x0000 */ -/** hmm, what is this I/O area for? MPU401?? (after playback, recording, ???, timer) **/ +/** hmm, what is this I/O area for? MPU401?? or external DAC via I2S?? (after playback, recording, ???, timer) **/ #define IDX_IO_SOMETHING_FLAGS 0x40 /* gets set to 0x34 just like port 0x0 and 0x20 on card init, PU:0x0000 */ /* general */ #define IDX_IO_42H 0x42 /* PU:0x0001 */ @@ -170,14 +170,14 @@ #define IDX_MIXER_ADVCTL1 0x1e /* unlisted bits are unmodifiable */ #define MIXER_ADVCTL1_3DWIDTH_MASK 0x000e - #define MIXER_ADVCTL1_HIFI3D_MASK 0x0300 -#define IDX_MIXER_ADVCTL2 0x20 /* resembles AC97_GENERAL_PURPOSE reg! */ + #define MIXER_ADVCTL1_HIFI3D_MASK 0x0300 /* yup, this is missing the high bit that official AC97 contains, plus it doesn't have linear bit value range behaviour but instead acts weirdly (possibly we're dealing with two *different* 3D settings here??) */ +#define IDX_MIXER_ADVCTL2 0x20 /* subset of AC97_GENERAL_PURPOSE reg! */ /* unlisted bits are unmodifiable */ - #define MIXER_ADVCTL2_BIT7 0x0080 /* WaveOut 3D Bypass? mutes WaveOut at LineOut */ - #define MIXER_ADVCTL2_BIT8 0x0100 /* is this Modem Out Select? */ - #define MIXER_ADVCTL2_BIT9 0x0200 /* Mono Select Source? */ - #define MIXER_ADVCTL2_BIT13 0x2000 /* 3D enable? */ - #define MIXER_ADVCTL2_BIT15 0x8000 /* unknown */ + #define MIXER_ADVCTL2_LPBK 0x0080 /* Loopback mode -- Win driver: "WaveOut3DBypass"? mutes WaveOut at LineOut */ + #define MIXER_ADVCTL2_MS 0x0100 /* Mic Select 0=Mic1, 1=Mic2 -- Win driver: "ModemOutSelect"?? */ + #define MIXER_ADVCTL2_MIX 0x0200 /* Mono output select 0=Mix, 1=Mic; Win driver: "MonoSelectSource"?? */ + #define MIXER_ADVCTL2_3D 0x2000 /* 3D Enhancement 1=on */ + #define MIXER_ADVCTL2_POP 0x8000 /* Pcm Out Path, 0=pre 3D, 1=post 3D */ #define IDX_MIXER_SOMETHING30H 0x30 /* used, but unknown??? */ -- cgit v1.2.3-59-g8ed1b