From 17b6c19b34b43a6a8dd5936b3cdbc63d7d1ae186 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:17 +0100 Subject: ASoC: pcm: Fix rate_max calculation In order to make sure that the sample rate is in the supported range of both components the maximum rate of the card should be the minimum of the maximum rate of each components. There is one special case to consider though, if max_rate is set to 0 this means there is no maximum specified, so use min_not_zero() macro which will give use the desired result. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 42782c01e413..9441e17d1147 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -153,7 +153,7 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, struct snd_soc_pcm_stream *cpu_stream) { hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, -- cgit v1.2.3-59-g8ed1b From 78e45c99f6d470e6069c8669ee533c97cc5fd296 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 27 Nov 2013 09:58:18 +0100 Subject: ASoC: pcm: Always honor DAI min and max sample rate constraints snd_pcm_limit_hw_rates() will initialize the minimum and maximum sample rate for the PCM stream based on the rates specified in the rates field. Since we call snd_pcm_limit_hw_rates() after soc_pcm_init_runtime_hw() it will essentially overwrite the min and max rate set in soc_pcm_init_runtime_hw(). This may cause the minimum or maximum rate to be set to a value outside the range of one of the components if one of the components sets either SNDRV_PCM_RATE_CONTINUOUS or SNDRV_PCM_RATE_KNOT and the other component specified a discrete rate via SNDRV_PCM_RATE_[0-9]* that is outside of the first component's rate range. To fix this first calculate the minimum and maximum rates using snd_pcm_limit_hw_rates() and then on top of that apply the contraints specified in the snd_soc_pcm_stream structs. Signed-off-by: Lars-Peter Clausen Acked-by: Takashi iwai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'sound') diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 9441e17d1147..11a90cd027fa 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -148,12 +148,12 @@ static void soc_pcm_apply_msb(struct snd_pcm_substream *substream, } } -static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, +static void soc_pcm_init_runtime_hw(struct snd_pcm_runtime *runtime, struct snd_soc_pcm_stream *codec_stream, struct snd_soc_pcm_stream *cpu_stream) { - hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); + struct snd_pcm_hardware *hw = &runtime->hw; + hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max, @@ -166,6 +166,13 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, if (cpu_stream->rates & (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS)) hw->rates |= codec_stream->rates; + + snd_pcm_limit_hw_rates(runtime); + + hw->rate_min = max(hw->rate_min, cpu_stream->rate_min); + hw->rate_min = max(hw->rate_min, codec_stream->rate_min); + hw->rate_max = min_not_zero(hw->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(hw->rate_max, codec_stream->rate_max); } /* @@ -235,15 +242,14 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) /* Check that the codec and cpu DAIs are compatible */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->playback, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->playback, &cpu_dai_drv->playback); } else { - soc_pcm_init_runtime_hw(&runtime->hw, &codec_dai_drv->capture, + soc_pcm_init_runtime_hw(runtime, &codec_dai_drv->capture, &cpu_dai_drv->capture); } ret = -EINVAL; - snd_pcm_limit_hw_rates(runtime); if (!runtime->hw.rates) { printk(KERN_ERR "ASoC: %s <-> %s No matching rates\n", codec_dai->name, cpu_dai->name); -- cgit v1.2.3-59-g8ed1b From 8f1ec93ae94e95e717283575997dd134a4c5397f Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 29 Nov 2013 13:33:11 +0000 Subject: ASoC: core: Use consistent byte ordering in snd_soc_bytes_get snd_soc_bytes_put treats the data in the binary control as big endian words, however snd_soc_bytes_get uses the endian of the host machine. This causes the two functions to be inconsistant with how the mask is applied on little endian machines. This patch applies the big_endian format used in snd_soc_bytes_put to snd_soc_bytes_get. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4e53d87e881d..a66783e13a9c 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3212,11 +3212,11 @@ int snd_soc_bytes_get(struct snd_kcontrol *kcontrol, break; case 2: ((u16 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be16(~params->mask); break; case 4: ((u32 *)(&ucontrol->value.bytes.data))[0] - &= ~params->mask; + &= cpu_to_be32(~params->mask); break; default: return -EINVAL; -- cgit v1.2.3-59-g8ed1b From ebff65473f56e6c30de928fd6a4f1ce5ae36e8c5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 2 Dec 2013 13:26:50 +0800 Subject: ASoC: core: fix devres parameter in devm_snd_soc_register_card() Since devm_card_release() expects parameter 'res' to be a pointer to struct snd_soc_card, devm_snd_soc_register_card() should really pass such a pointer rather than the one to struct device. This bug causes the kernel Oops below with imx-sgtl500 driver when we remove the module. It happens because with 'card' pointing to the wrong structure, card->num_rtd becomes 0 in function soc_remove_dai_links(). Consequently, soc_remove_link_components() and in turn soc_cleanup_codec[platform]_debugfs() will not be called on card removal. It results in that debugfs_card_root is being removed while its child entries debugfs_codec_root and debugfs_platform_root are still there, and thus the kernel Oops. Fix the bug by correcting the parameter 'res' to be the pointer to struct snd_soc_card. $ lsmod Module Size Used by snd_soc_imx_sgtl5000 3506 0 snd_soc_sgtl5000 13677 2 snd_soc_imx_audmux 5324 1 snd_soc_imx_sgtl5000 snd_soc_fsl_ssi 8139 2 imx_pcm_dma 1380 1 snd_soc_fsl_ssi $ rmmod snd_soc_imx_sgtl5000 Unable to handle kernel paging request at virtual address e594025c pgd = be134000 [e594025c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_imx_sgtl5000(-) snd_soc_sgtl5000 snd_soc_imx_audmux snd_soc_fsl_ssi imx_pcm_dma CPU: 0 PID: 1793 Comm: rmmod Not tainted 3.13.0-rc1 #1570 task: bee28900 ti: bfbec000 task.ti: bfbec000 PC is at debugfs_remove_recursive+0x28/0x154 LR is at snd_soc_unregister_card+0xa0/0xcc pc : [<80252b38>] lr : [<80496ac4>] psr: a0000013 sp : bfbede00 ip : bfbede28 fp : bfbede24 r10: 803281d4 r9 : bfbec000 r8 : 803271ac r7 : bef54440 r6 : 00000004 r5 : bf9a4010 r4 : bf9a4010 r3 : e5940224 r2 : 00000000 r1 : bef54450 r0 : 803271ac Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4e13404a DAC: 00000015 Process rmmod (pid: 1793, stack limit = 0xbfbec240) Stack: (0xbfbede00 to 0xbfbee000) de00: 00000000 bf9a4010 bf9a4010 00000004 bef54440 bec89000 bfbede44 bfbede28 de20: 80496ac4 80252b1c 804a4b60 bfbede60 bf9a4010 00000004 bfbede54 bfbede48 de40: 804a4b74 80496a30 bfbede94 bfbede58 80328728 804a4b6c bfbede94 a0000013 de60: bf1b5800 bef54440 00000002 bf9a4010 7f0169f8 bf9a4044 00000081 8000e9c4 de80: bfbec000 00000000 bfbedeac bfbede98 80328cb0 80328618 7f016000 bf9a4010 dea0: bfbedec4 bfbedeb0 8032561c 80328c84 bf9a4010 7f0169f8 bfbedee4 bfbedec8 dec0: 80325e84 803255a8 bee28900 7f0169f8 00000000 78208d30 bfbedefc bfbedee8 dee0: 80325410 80325dd4 beca8100 7f0169f8 bfbedf14 bfbedf00 803264f8 803253c8 df00: 7f01635c 7f016a3c bfbedf24 bfbedf18 80327098 803264d4 bfbedf34 bfbedf28 df20: 7f016370 80327090 bfbedfa4 bfbedf38 80085ef0 7f016368 bfbedf54 5f646e73 df40: 5f636f73 5f786d69 6c746773 30303035 00000000 78208008 bfbedf84 bfbedf68 df60: 800613b0 80061194 fffffffe 78208d00 7efc2f07 00000081 7f016a3c 00000800 df80: bfbedf84 00000000 00000000 fffffffe 78208d00 7efc2f07 00000000 bfbedfa8 dfa0: 8000e800 80085dcc fffffffe 78208d00 78208d30 00000800 a8c82400 a8c82400 dfc0: fffffffe 78208d00 7efc2f07 00000081 00000002 00000000 78208008 00000800 dfe0: 7efc2e1c 7efc2ba8 76f5ca47 76edec7c 80000010 78208d30 00000000 00000000 Backtrace: [<80252b10>] (debugfs_remove_recursive+0x0/0x154) from [<80496ac4>] (snd_soc_unregister_card+0xa0/0xcc) r8:bec89000 r7:bef54440 r6:00000004 r5:bf9a4010 r4:bf9a4010 r3:00000000 [<80496a24>] (snd_soc_unregister_card+0x0/0xcc) from [<804a4b74>] (devm_card_release+0x14/0x18) r6:00000004 r5:bf9a4010 r4:bfbede60 r3:804a4b60 [<804a4b60>] (devm_card_release+0x0/0x18) from [<80328728>] (release_nodes+0x11c/0x1dc) [<8032860c>] (release_nodes+0x0/0x1dc) from [<80328cb0>] (devres_release_all+0x38/0x54) [<80328c78>] (devres_release_all+0x0/0x54) from [<8032561c>] (__device_release_driver+0x80/0xd4) r4:bf9a4010 r3:7f016000 [<8032559c>] (__device_release_driver+0x0/0xd4) from [<80325e84>] (driver_detach+0xbc/0xc0) r5:7f0169f8 r4:bf9a4010 [<80325dc8>] (driver_detach+0x0/0xc0) from [<80325410>] (bus_remove_driver+0x54/0x98) r6:78208d30 r5:00000000 r4:7f0169f8 r3:bee28900 [<803253bc>] (bus_remove_driver+0x0/0x98) from [<803264f8>] (driver_unregister+0x30/0x50) r4:7f0169f8 r3:beca8100 [<803264c8>] (driver_unregister+0x0/0x50) from [<80327098>] (platform_driver_unregister+0x14/0x18) r4:7f016a3c r3:7f01635c [<80327084>] (platform_driver_unregister+0x0/0x18) from [<7f016370>] (imx_sgtl5000_driver_exit+0x14/0x1c [snd_soc_imx_sgtl5000]) [<7f01635c>] (imx_sgtl5000_driver_exit+0x0/0x1c [snd_soc_imx_sgtl5000]) from [<80085ef0>] (SyS_delete_module+0x130/0x18c) [<80085dc0>] (SyS_delete_module+0x0/0x18c) from [<8000e800>] (ret_fast_syscall+0x0/0x48) r6:7efc2f07 r5:78208d00 r4:fffffffe Code: 889da9f8 e5983020 e3530000 089da9f8 (e5933038) ---[ end trace 825e7e125251a225 ]--- Signed-off-by: Shawn Guo Signed-off-by: Mark Brown --- sound/soc/soc-devres.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c index b1d732255c02..3449c1e909ae 100644 --- a/sound/soc/soc-devres.c +++ b/sound/soc/soc-devres.c @@ -66,7 +66,7 @@ static void devm_card_release(struct device *dev, void *res) */ int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card) { - struct device **ptr; + struct snd_soc_card **ptr; int ret; ptr = devres_alloc(devm_card_release, sizeof(*ptr), GFP_KERNEL); @@ -75,7 +75,7 @@ int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card) ret = snd_soc_register_card(card); if (ret == 0) { - *ptr = dev; + *ptr = card; devres_add(dev, ptr); } else { devres_free(ptr); -- cgit v1.2.3-59-g8ed1b