From 375389288ae55754bd7d009a30f2bb0453a5b369 Mon Sep 17 00:00:00 2001 From: Christoph Schulz Date: Fri, 3 Jun 2005 08:28:31 +0200 Subject: [ALSA] cs4236-irq-handling-fix.patch CS4236+ driver Background: The card/chipset supports an external MIDI interrupt. By default, this interrupt isn't used (because the isapnp mechanism chooses a configuration without an assigned interrupt). If the user wishes to explicitly select an interrupt via the mpu_irq parameter for such a configured device, it doesn't work: The driver always shows: isapnp MPU: port=0x330, irq=-1 (note the 'irq=-1') Problem: The driver only allows to set the irq if pnp_irq_valid returns true for this particular pnp device. This, however, is only true if an interrupt has already been assigned (pnp_valid_irq returns true if the flag IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns false, thereby inhibiting the selection of a valid irq. Solution: Don't check for a valid (= already assigned) irq at the point of calling pnp_resource_change. Tested successfully on Linux 2.6.11. Signed-off-by: Andrew Morton Signed-off-by: Jaroslav Kysela --- sound/isa/cs423x/cs4236.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index e745a54e00a1..39f4eff44f5c 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -349,8 +349,7 @@ static int __devinit snd_card_cs4236_pnp(int dev, struct snd_card_cs4236 *acard, pnp_init_resource_table(cfg); if (mpu_port[dev] != SNDRV_AUTO_PORT) pnp_resource_change(&cfg->port_resource[0], mpu_port[dev], 2); - if (mpu_irq[dev] != SNDRV_AUTO_IRQ && mpu_irq[dev] >= 0 && - pnp_irq_valid(pdev, 0)) + if (mpu_irq[dev] != SNDRV_AUTO_IRQ && mpu_irq[dev] >= 0) pnp_resource_change(&cfg->irq_resource[0], mpu_irq[dev], 1); err = pnp_manual_config_dev(pdev, cfg, 0); if (err < 0) -- cgit v1.2.3-59-g8ed1b