From e9be4ffd4f40fcb18209dc5120233f2d11a24b6a Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 30 May 2018 21:45:56 +0200 Subject: ASoC: simple-card: set cpu dai clk in hw_params The simple-card driver currently accepts a clock node in the cpu dai sub-node and only uses it as an alternative to the 'system-clock-frequency' property to get the current frequency. This patch adds another use of the passed clock node. If mclk-fs is specified, the clocks in cpu and codec dai sub-nodes will be set to the calculated rate (stream rate * mclk_fs) in hw_params. This allows platforms to pass tuneable clocks as phandle that will automatically be set to the right rates. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/generic/simple-card.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'sound') diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 6959a74a6f49..4a516c428b3d 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -135,6 +135,18 @@ static void asoc_simple_card_shutdown(struct snd_pcm_substream *substream) asoc_simple_card_clk_disable(&dai_props->codec_dai); } +static int asoc_simple_set_clk_rate(struct asoc_simple_dai *simple_dai, + unsigned long rate) +{ + if (!simple_dai->clk) + return 0; + + if (clk_get_rate(simple_dai->clk) == rate) + return 0; + + return clk_set_rate(simple_dai->clk, rate); +} + static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -154,6 +166,15 @@ static int asoc_simple_card_hw_params(struct snd_pcm_substream *substream, if (mclk_fs) { mclk = params_rate(params) * mclk_fs; + + ret = asoc_simple_set_clk_rate(&dai_props->codec_dai, mclk); + if (ret < 0) + return ret; + + ret = asoc_simple_set_clk_rate(&dai_props->cpu_dai, mclk); + if (ret < 0) + return ret; + ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk, SND_SOC_CLOCK_IN); if (ret && ret != -ENOTSUPP) -- cgit v1.2.3-59-g8ed1b