From 5d48d6b0203de854587e8338376661e2315b2571 Mon Sep 17 00:00:00 2001 From: Daniel Baluta Date: Tue, 24 May 2016 18:03:55 +0300 Subject: tools: iio: Rename generic_buffer to iio_generic_buffer This makes it clear that generic_buffer is an IIO tool and also complies with filename conventions in tools/iio. Signed-off-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- tools/iio/iio_generic_buffer.c | 581 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 581 insertions(+) create mode 100644 tools/iio/iio_generic_buffer.c (limited to 'tools/iio/iio_generic_buffer.c') diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c new file mode 100644 index 000000000000..2429c78de940 --- /dev/null +++ b/tools/iio/iio_generic_buffer.c @@ -0,0 +1,581 @@ +/* Industrialio buffer test code. + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is primarily intended as an example application. + * Reads the current buffer setup from sysfs and starts a short capture + * from the specified device, pretty printing the result after appropriate + * conversion. + * + * Command line parameters + * generic_buffer -n -t + * If trigger name is not specified the program assumes you want a dataready + * trigger associated with the device and goes looking for it. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "iio_utils.h" + +/** + * enum autochan - state for the automatic channel enabling mechanism + */ +enum autochan { + AUTOCHANNELS_DISABLED, + AUTOCHANNELS_ENABLED, + AUTOCHANNELS_ACTIVE, +}; + +/** + * size_from_channelarray() - calculate the storage size of a scan + * @channels: the channel info array + * @num_channels: number of channels + * + * Has the side effect of filling the channels[i].location values used + * in processing the buffer output. + **/ +int size_from_channelarray(struct iio_channel_info *channels, int num_channels) +{ + int bytes = 0; + int i = 0; + + while (i < num_channels) { + if (bytes % channels[i].bytes == 0) + channels[i].location = bytes; + else + channels[i].location = bytes - bytes % channels[i].bytes + + channels[i].bytes; + + bytes = channels[i].location + channels[i].bytes; + i++; + } + + return bytes; +} + +void print1byte(uint8_t input, struct iio_channel_info *info) +{ + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + input &= info->mask; + if (info->is_signed) { + int8_t val = (int8_t)(input << (8 - info->bits_used)) >> + (8 - info->bits_used); + printf("%05f ", ((float)val + info->offset) * info->scale); + } else { + printf("%05f ", ((float)input + info->offset) * info->scale); + } +} + +void print2byte(uint16_t input, struct iio_channel_info *info) +{ + /* First swap if incorrect endian */ + if (info->be) + input = be16toh(input); + else + input = le16toh(input); + + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + input &= info->mask; + if (info->is_signed) { + int16_t val = (int16_t)(input << (16 - info->bits_used)) >> + (16 - info->bits_used); + printf("%05f ", ((float)val + info->offset) * info->scale); + } else { + printf("%05f ", ((float)input + info->offset) * info->scale); + } +} + +void print4byte(uint32_t input, struct iio_channel_info *info) +{ + /* First swap if incorrect endian */ + if (info->be) + input = be32toh(input); + else + input = le32toh(input); + + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + input &= info->mask; + if (info->is_signed) { + int32_t val = (int32_t)(input << (32 - info->bits_used)) >> + (32 - info->bits_used); + printf("%05f ", ((float)val + info->offset) * info->scale); + } else { + printf("%05f ", ((float)input + info->offset) * info->scale); + } +} + +void print8byte(uint64_t input, struct iio_channel_info *info) +{ + /* First swap if incorrect endian */ + if (info->be) + input = be64toh(input); + else + input = le64toh(input); + + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + input &= info->mask; + if (info->is_signed) { + int64_t val = (int64_t)(input << (64 - info->bits_used)) >> + (64 - info->bits_used); + /* special case for timestamp */ + if (info->scale == 1.0f && info->offset == 0.0f) + printf("%" PRId64 " ", val); + else + printf("%05f ", + ((float)val + info->offset) * info->scale); + } else { + printf("%05f ", ((float)input + info->offset) * info->scale); + } +} + +/** + * process_scan() - print out the values in SI units + * @data: pointer to the start of the scan + * @channels: information about the channels. + * Note: size_from_channelarray must have been called first + * to fill the location offsets. + * @num_channels: number of channels + **/ +void process_scan(char *data, + struct iio_channel_info *channels, + int num_channels) +{ + int k; + + for (k = 0; k < num_channels; k++) + switch (channels[k].bytes) { + /* only a few cases implemented so far */ + case 1: + print1byte(*(uint8_t *)(data + channels[k].location), + &channels[k]); + break; + case 2: + print2byte(*(uint16_t *)(data + channels[k].location), + &channels[k]); + break; + case 4: + print4byte(*(uint32_t *)(data + channels[k].location), + &channels[k]); + break; + case 8: + print8byte(*(uint64_t *)(data + channels[k].location), + &channels[k]); + break; + default: + break; + } + printf("\n"); +} + +static int enable_disable_all_channels(char *dev_dir_name, int enable) +{ + const struct dirent *ent; + char scanelemdir[256]; + DIR *dp; + int ret; + + snprintf(scanelemdir, sizeof(scanelemdir), + FORMAT_SCAN_ELEMENTS_DIR, dev_dir_name); + scanelemdir[sizeof(scanelemdir)-1] = '\0'; + + dp = opendir(scanelemdir); + if (!dp) { + fprintf(stderr, "Enabling/disabling channels: can't open %s\n", + scanelemdir); + return -EIO; + } + + ret = -ENOENT; + while (ent = readdir(dp), ent) { + if (iioutils_check_suffix(ent->d_name, "_en")) { + printf("%sabling: %s\n", + enable ? "En" : "Dis", + ent->d_name); + ret = write_sysfs_int(ent->d_name, scanelemdir, + enable); + if (ret < 0) + fprintf(stderr, "Failed to enable/disable %s\n", + ent->d_name); + } + } + + if (closedir(dp) == -1) { + perror("Enabling/disabling channels: " + "Failed to close directory"); + return -errno; + } + return 0; +} + +void print_usage(void) +{ + fprintf(stderr, "Usage: generic_buffer [options]...\n" + "Capture, convert and output data from IIO device buffer\n" + " -a Auto-activate all available channels\n" + " -c Do n conversions\n" + " -e Disable wait for event (new data)\n" + " -g Use trigger-less mode\n" + " -l Set buffer length to n samples\n" + " -n Set device name (mandatory)\n" + " -t Set trigger name\n" + " -w Set delay between reads in us (event-less mode)\n"); +} + +int main(int argc, char **argv) +{ + unsigned long num_loops = 2; + unsigned long timedelay = 1000000; + unsigned long buf_len = 128; + + int ret, c, i, j, toread; + int fp; + + int num_channels; + char *trigger_name = NULL, *device_name = NULL; + char *dev_dir_name, *buf_dir_name; + + int datardytrigger = 1; + char *data; + ssize_t read_size; + int dev_num, trig_num; + char *buffer_access; + int scan_size; + int noevents = 0; + int notrigger = 0; + enum autochan autochannels = AUTOCHANNELS_DISABLED; + char *dummy; + + struct iio_channel_info *channels; + + while ((c = getopt(argc, argv, "ac:egl:n:t:w:")) != -1) { + switch (c) { + case 'a': + autochannels = AUTOCHANNELS_ENABLED; + break; + case 'c': + errno = 0; + num_loops = strtoul(optarg, &dummy, 10); + if (errno) + return -errno; + + break; + case 'e': + noevents = 1; + break; + case 'g': + notrigger = 1; + break; + case 'l': + errno = 0; + buf_len = strtoul(optarg, &dummy, 10); + if (errno) + return -errno; + + break; + case 'n': + device_name = optarg; + break; + case 't': + trigger_name = optarg; + datardytrigger = 0; + break; + case 'w': + errno = 0; + timedelay = strtoul(optarg, &dummy, 10); + if (errno) + return -errno; + break; + case '?': + print_usage(); + return -1; + } + } + + if (!device_name) { + fprintf(stderr, "Device name not set\n"); + print_usage(); + return -1; + } + + /* Find the device requested */ + dev_num = find_type_by_name(device_name, "iio:device"); + if (dev_num < 0) { + fprintf(stderr, "Failed to find the %s\n", device_name); + return dev_num; + } + + printf("iio device number being used is %d\n", dev_num); + + ret = asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num); + if (ret < 0) + return -ENOMEM; + + if (!notrigger) { + if (!trigger_name) { + /* + * Build the trigger name. If it is device associated + * its name is _dev[n] where n matches + * the device number found above. + */ + ret = asprintf(&trigger_name, + "%s-dev%d", device_name, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_dev_dir_name; + } + } + + /* Look for this "-devN" trigger */ + trig_num = find_type_by_name(trigger_name, "trigger"); + if (trig_num < 0) { + /* OK try the simpler "-trigger" suffix instead */ + free(trigger_name); + ret = asprintf(&trigger_name, + "%s-trigger", device_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_dev_dir_name; + } + } + + trig_num = find_type_by_name(trigger_name, "trigger"); + if (trig_num < 0) { + fprintf(stderr, "Failed to find the trigger %s\n", + trigger_name); + ret = trig_num; + goto error_free_triggername; + } + + printf("iio trigger number being used is %d\n", trig_num); + } else { + printf("trigger-less mode selected\n"); + } + + /* + * Parse the files in scan_elements to identify what channels are + * present + */ + ret = build_channel_array(dev_dir_name, &channels, &num_channels); + if (ret) { + fprintf(stderr, "Problem reading scan element information\n" + "diag %s\n", dev_dir_name); + goto error_free_triggername; + } + if (num_channels && autochannels == AUTOCHANNELS_ENABLED) { + fprintf(stderr, "Auto-channels selected but some channels " + "are already activated in sysfs\n"); + fprintf(stderr, "Proceeding without activating any channels\n"); + } + + if (!num_channels && autochannels == AUTOCHANNELS_ENABLED) { + fprintf(stderr, + "No channels are enabled, enabling all channels\n"); + + ret = enable_disable_all_channels(dev_dir_name, 1); + if (ret) { + fprintf(stderr, "Failed to enable all channels\n"); + goto error_free_triggername; + } + + /* This flags that we need to disable the channels again */ + autochannels = AUTOCHANNELS_ACTIVE; + + ret = build_channel_array(dev_dir_name, &channels, + &num_channels); + if (ret) { + fprintf(stderr, "Problem reading scan element " + "information\n" + "diag %s\n", dev_dir_name); + goto error_disable_channels; + } + if (!num_channels) { + fprintf(stderr, "Still no channels after " + "auto-enabling, giving up\n"); + goto error_disable_channels; + } + } + + if (!num_channels && autochannels == AUTOCHANNELS_DISABLED) { + fprintf(stderr, + "No channels are enabled, we have nothing to scan.\n"); + fprintf(stderr, "Enable channels manually in " + FORMAT_SCAN_ELEMENTS_DIR + "/*_en or pass -a to autoenable channels and " + "try again.\n", dev_dir_name); + ret = -ENOENT; + goto error_free_triggername; + } + + /* + * Construct the directory name for the associated buffer. + * As we know that the lis3l02dq has only one buffer this may + * be built rather than found. + */ + ret = asprintf(&buf_dir_name, + "%siio:device%d/buffer", iio_dir, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_channels; + } + + if (!notrigger) { + printf("%s %s\n", dev_dir_name, trigger_name); + /* + * Set the device trigger to be the data ready trigger found + * above + */ + ret = write_sysfs_string_and_verify("trigger/current_trigger", + dev_dir_name, + trigger_name); + if (ret < 0) { + fprintf(stderr, + "Failed to write current_trigger file\n"); + goto error_free_buf_dir_name; + } + } + + /* Setup ring buffer parameters */ + ret = write_sysfs_int("length", buf_dir_name, buf_len); + if (ret < 0) + goto error_free_buf_dir_name; + + /* Enable the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 1); + if (ret < 0) { + fprintf(stderr, + "Failed to enable buffer: %s\n", strerror(-ret)); + goto error_free_buf_dir_name; + } + + scan_size = size_from_channelarray(channels, num_channels); + data = malloc(scan_size * buf_len); + if (!data) { + ret = -ENOMEM; + goto error_free_buf_dir_name; + } + + ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_data; + } + + /* Attempt to open non blocking the access dev */ + fp = open(buffer_access, O_RDONLY | O_NONBLOCK); + if (fp == -1) { /* TODO: If it isn't there make the node */ + ret = -errno; + fprintf(stderr, "Failed to open %s\n", buffer_access); + goto error_free_buffer_access; + } + + for (j = 0; j < num_loops; j++) { + if (!noevents) { + struct pollfd pfd = { + .fd = fp, + .events = POLLIN, + }; + + ret = poll(&pfd, 1, -1); + if (ret < 0) { + ret = -errno; + goto error_close_buffer_access; + } else if (ret == 0) { + continue; + } + + toread = buf_len; + } else { + usleep(timedelay); + toread = 64; + } + + read_size = read(fp, data, toread * scan_size); + if (read_size < 0) { + if (errno == EAGAIN) { + fprintf(stderr, "nothing available\n"); + continue; + } else { + break; + } + } + for (i = 0; i < read_size / scan_size; i++) + process_scan(data + scan_size * i, channels, + num_channels); + } + + /* Stop the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 0); + if (ret < 0) + goto error_close_buffer_access; + + if (!notrigger) + /* Disconnect the trigger - just write a dummy name. */ + ret = write_sysfs_string("trigger/current_trigger", + dev_dir_name, "NULL"); + if (ret < 0) + fprintf(stderr, "Failed to write to %s\n", + dev_dir_name); + +error_close_buffer_access: + if (close(fp) == -1) + perror("Failed to close buffer"); + +error_free_buffer_access: + free(buffer_access); +error_free_data: + free(data); +error_free_buf_dir_name: + free(buf_dir_name); +error_free_channels: + for (i = num_channels - 1; i >= 0; i--) { + free(channels[i].name); + free(channels[i].generic_name); + } + free(channels); +error_free_triggername: + if (datardytrigger) + free(trigger_name); +error_disable_channels: + if (autochannels == AUTOCHANNELS_ACTIVE) { + ret = enable_disable_all_channels(dev_dir_name, 0); + if (ret) + fprintf(stderr, "Failed to disable all channels\n"); + } +error_free_dev_dir_name: + free(dev_dir_name); + + return ret; +} -- cgit v1.2.3-59-g8ed1b