From 0f1148abb226f3639845738cdf3d2534ceb1d059 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 8 Sep 2021 14:28:38 +0200 Subject: selftests: netfilter: add selftest for directional zone support Add a script to exercise NAT port clash resolution with directional zones. Add net namespaces that use the same IP address and connect them to a gateway. Gateway uses policy routing based on iif/mark and conntrack zones to isolate the client namespaces. In server direction, same zone with NAT to single address is used. Then, connect to a server from each client netns, using identical connection id, i.e. saddr:sport -> daddr:dport. Expectation is for all connections to succeeed: NAT gatway is supposed to do port reallocation for each of the (clashing) connections. This is based on the description/use case provided in the commit message of deedb59039f111 ("netfilter: nf_conntrack: add direction support for zones"). Cc: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/nft_nat_zones.sh | 309 +++++++++++++++++++++ 1 file changed, 309 insertions(+) create mode 100755 tools/testing/selftests/netfilter/nft_nat_zones.sh (limited to 'tools/testing/selftests/netfilter') diff --git a/tools/testing/selftests/netfilter/nft_nat_zones.sh b/tools/testing/selftests/netfilter/nft_nat_zones.sh new file mode 100755 index 000000000000..b9ab37380f33 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_nat_zones.sh @@ -0,0 +1,309 @@ +#!/bin/bash +# +# Test connection tracking zone and NAT source port reallocation support. +# + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# Don't increase too much, 2000 clients should work +# just fine but script can then take several minutes with +# KASAN/debug builds. +maxclients=100 + +have_iperf=1 +ret=0 + +# client1---. +# veth1-. +# | +# NAT Gateway --veth0--> Server +# | | +# veth2-' | +# client2---' | +# .... | +# clientX----vethX---' + +# All clients share identical IP address. +# NAT Gateway uses policy routing and conntrack zones to isolate client +# namespaces. Each client connects to Server, each with colliding tuples: +# clientsaddr:10000 -> serveraddr:dport +# NAT Gateway is supposed to do port reallocation for each of the +# connections. + +sfx=$(mktemp -u "XXXXXXXX") +gw="ns-gw-$sfx" +cl1="ns-cl1-$sfx" +cl2="ns-cl2-$sfx" +srv="ns-srv-$sfx" + +v4gc1=$(sysctl -n net.ipv4.neigh.default.gc_thresh1 2>/dev/null) +v4gc2=$(sysctl -n net.ipv4.neigh.default.gc_thresh2 2>/dev/null) +v4gc3=$(sysctl -n net.ipv4.neigh.default.gc_thresh3 2>/dev/null) +v6gc1=$(sysctl -n net.ipv6.neigh.default.gc_thresh1 2>/dev/null) +v6gc2=$(sysctl -n net.ipv6.neigh.default.gc_thresh2 2>/dev/null) +v6gc3=$(sysctl -n net.ipv6.neigh.default.gc_thresh3 2>/dev/null) + +cleanup() +{ + ip netns del $gw + ip netns del $srv + for i in $(seq 1 $maxclients); do + ip netns del ns-cl$i-$sfx 2>/dev/null + done + + sysctl -q net.ipv4.neigh.default.gc_thresh1=$v4gc1 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh2=$v4gc2 2>/dev/null + sysctl -q net.ipv4.neigh.default.gc_thresh3=$v4gc3 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh1=$v6gc1 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh2=$v6gc2 2>/dev/null + sysctl -q net.ipv6.neigh.default.gc_thresh3=$v6gc3 2>/dev/null +} + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +conntrack -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without conntrack tool" + exit $ksft_skip +fi + +iperf3 -v >/dev/null 2>&1 +if [ $? -ne 0 ];then + have_iperf=0 +fi + +ip netns add "$gw" +if [ $? -ne 0 ];then + echo "SKIP: Could not create net namespace $gw" + exit $ksft_skip +fi +ip -net "$gw" link set lo up + +trap cleanup EXIT + +ip netns add "$srv" +if [ $? -ne 0 ];then + echo "SKIP: Could not create server netns $srv" + exit $ksft_skip +fi + +ip link add veth0 netns "$gw" type veth peer name eth0 netns "$srv" +ip -net "$gw" link set veth0 up +ip -net "$srv" link set lo up +ip -net "$srv" link set eth0 up + +sysctl -q net.ipv6.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv6.neigh.default.gc_thresh3=4096 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh1=512 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh2=1024 2>/dev/null +sysctl -q net.ipv4.neigh.default.gc_thresh3=4096 2>/dev/null + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + + ip netns add "$cl" + if [ $? -ne 0 ];then + echo "SKIP: Could not create client netns $cl" + exit $ksft_skip + fi + ip link add veth$i netns "$gw" type veth peer name eth0 netns "$cl" > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: No virtual ethernet pair device support in kernel" + exit $ksft_skip + fi +done + +for i in $(seq 1 $maxclients);do + cl="ns-cl$i-$sfx" + echo netns exec "$cl" ip link set lo up + echo netns exec "$cl" ip link set eth0 up + echo netns exec "$cl" sysctl -q net.ipv4.tcp_syn_retries=2 + echo netns exec "$gw" ip link set veth$i up + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.arp_ignore=2 + echo netns exec "$gw" sysctl -q net.ipv4.conf.veth$i.rp_filter=0 + + # clients have same IP addresses. + echo netns exec "$cl" ip addr add 10.1.0.3/24 dev eth0 + echo netns exec "$cl" ip addr add dead:1::3/64 dev eth0 + echo netns exec "$cl" ip route add default via 10.1.0.2 dev eth0 + echo netns exec "$cl" ip route add default via dead:1::2 dev eth0 + + # NB: same addresses on client-facing interfaces. + echo netns exec "$gw" ip addr add 10.1.0.2/24 dev veth$i + echo netns exec "$gw" ip addr add dead:1::2/64 dev veth$i + + # gw: policy routing + echo netns exec "$gw" ip route add 10.1.0.0/24 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add dead:1::0/64 dev veth$i table $((1000+i)) + echo netns exec "$gw" ip route add 10.3.0.0/24 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip route add dead:3::0/64 dev veth0 table $((1000+i)) + echo netns exec "$gw" ip rule add fwmark $i lookup $((1000+i)) +done | ip -batch /dev/stdin + +ip -net "$gw" addr add 10.3.0.1/24 dev veth0 +ip -net "$gw" addr add dead:3::1/64 dev veth0 + +ip -net "$srv" addr add 10.3.0.99/24 dev eth0 +ip -net "$srv" addr add dead:3::99/64 dev eth0 + +ip netns exec $gw nft -f /dev/stdin< /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv4.conf.all.rp_filter=0 >/dev/null + +# useful for debugging: allows to use 'ping' from clients to gateway. +ip netns exec "$gw" sysctl -q net.ipv4.fwmark_reflect=1 > /dev/null +ip netns exec "$gw" sysctl -q net.ipv6.fwmark_reflect=1 > /dev/null + +for i in $(seq 1 $maxclients); do + cl="ns-cl$i-$sfx" + ip netns exec $cl ping -i 0.5 -q -c 3 10.3.0.99 > /dev/null 2>&1 & + if [ $? -ne 0 ]; then + echo FAIL: Ping failure from $cl 1>&2 + ret=1 + break + fi +done + +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" | grep -q "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 counter packets 3 bytes 252 }" + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth$i" 1>&2 + ip netns exec $gw nft get element inet raw inicmp "{ 10.1.0.3 . \"veth$i\" . 10.3.0.99 }" 1>&2 + break + fi +done + +ip netns exec $gw nft get element inet raw inicmp "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 }" | grep -q "{ 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: counter icmp mismatch for veth0: { 10.3.0.99 . \"veth0\" . 10.3.0.1 counter packets $((3 * $maxclients)) bytes $((252 * $maxclients)) }" + ip netns exec $gw nft get element inet raw inicmp "{ 10.3.99 . \"veth0\" . 10.3.0.1 }" 1>&2 +fi + +if [ $ret -eq 0 ]; then + echo "PASS: ping test from all $maxclients namespaces" +fi + +if [ $have_iperf -eq 0 ];then + echo "SKIP: iperf3 not installed" + if [ $ret -ne 0 ];then + exit $ret + fi + exit $ksft_skip +fi + +ip netns exec $srv iperf3 -s > /dev/null 2>&1 & +iperfpid=$! +sleep 1 + +for i in $(seq 1 $maxclients); do + if [ $ret -ne 0 ]; then + break + fi + cl="ns-cl$i-$sfx" + ip netns exec $cl iperf3 -c 10.3.0.99 --cport 10000 -n 1 > /dev/null + if [ $? -ne 0 ]; then + echo FAIL: Failure to connect for $cl 1>&2 + ip netns exec $gw conntrack -S 1>&2 + ret=1 + fi +done +if [ $ret -eq 0 ];then + echo "PASS: iperf3 connections for all $maxclients net namespaces" +fi + +kill $iperfpid +wait + +for i in $(seq 1 $maxclients); do + ip netns exec $gw nft get element inet raw inflows "{ 10.1.0.3 . 10000 . \"veth$i\" . 10.3.0.99 . 5201 }" > /dev/null + if [ $? -ne 0 ];then + ret=1 + echo "FAIL: can't find expected tcp entry for veth$i" 1>&2 + break + fi +done +if [ $ret -eq 0 ];then + echo "PASS: Found client connection for all $maxclients net namespaces" +fi + +ip netns exec $gw nft get element inet raw inflows "{ 10.3.0.99 . 5201 . \"veth0\" . 10.3.0.1 . 10000 }" > /dev/null +if [ $? -ne 0 ];then + ret=1 + echo "FAIL: cannot find return entry on veth0" 1>&2 +fi + +exit $ret -- cgit v1.2.3-59-g8ed1b