From 26f7fe4a5db5b41d2abe53e37100c8984b157fb2 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 11 Apr 2019 16:36:39 +0200 Subject: selftests: netfilter: add ebtables broute test case ebtables -t broute allows to redirect packets in a way that they get pushed up the stack, even if the interface is part of a bridge. In case of IP packets to non-local address, this means those IP packets are routed instead of bridged-forwarded, just as if the bridge would not have existed. Expected test output is: PASS: netns connectivity: ns1 and ns2 can reach each other PASS: ns1/ns2 connectivity with active broute rule PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop Signed-off-by: Florian Westphal Acked-by: David S. Miller Acked-by: Nikolay Aleksandrov Signed-off-by: Pablo Neira Ayuso --- tools/testing/selftests/netfilter/Makefile | 2 +- .../testing/selftests/netfilter/bridge_brouter.sh | 146 +++++++++++++++++++++ 2 files changed, 147 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/netfilter/bridge_brouter.sh (limited to 'tools') diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile index c9ff2b47bd1c..80dae72a25c7 100644 --- a/tools/testing/selftests/netfilter/Makefile +++ b/tools/testing/selftests/netfilter/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for netfilter selftests -TEST_PROGS := nft_trans_stress.sh nft_nat.sh +TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh include ../lib.mk diff --git a/tools/testing/selftests/netfilter/bridge_brouter.sh b/tools/testing/selftests/netfilter/bridge_brouter.sh new file mode 100755 index 000000000000..29f3955b9af7 --- /dev/null +++ b/tools/testing/selftests/netfilter/bridge_brouter.sh @@ -0,0 +1,146 @@ +#!/bin/bash +# +# This test is for bridge 'brouting', i.e. make some packets being routed +# rather than getting bridged even though they arrive on interface that is +# part of a bridge. + +# eth0 br0 eth0 +# setup is: ns1 <-> ns0 <-> ns2 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +ret=0 + +ebtables -V > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ebtables" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +ip netns add ns0 +ip netns add ns1 +ip netns add ns2 + +ip link add veth0 netns ns0 type veth peer name eth0 netns ns1 +if [ $? -ne 0 ]; then + echo "SKIP: Can't create veth device" + exit $ksft_skip +fi +ip link add veth1 netns ns0 type veth peer name eth0 netns ns2 + +ip -net ns0 link set lo up +ip -net ns0 link set veth0 up +ip -net ns0 link set veth1 up + +ip -net ns0 link add br0 type bridge +if [ $? -ne 0 ]; then + echo "SKIP: Can't create bridge br0" + exit $ksft_skip +fi + +ip -net ns0 link set veth0 master br0 +ip -net ns0 link set veth1 master br0 +ip -net ns0 link set br0 up +ip -net ns0 addr add 10.0.0.1/24 dev br0 + +# place both in same subnet, ns1 and ns2 connected via ns0:br0 +for i in 1 2; do + ip -net ns$i link set lo up + ip -net ns$i link set eth0 up + ip -net ns$i addr add 10.0.0.1$i/24 dev eth0 +done + +test_ebtables_broute() +{ + local cipt + + # redirect is needed so the dstmac is rewritten to the bridge itself, + # ip stack won't process OTHERHOST (foreign unicast mac) packets. + ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ebtables broute redirect rule" + return $ksft_skip + fi + + # ping netns1, expected to not work (ip forwarding is off) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "ERROR: ping works, should have failed" 1>&2 + return 1 + fi + + # enable forwarding on both interfaces. + # neither needs an ip address, but at least the bridge needs + # an ip address in same network segment as ns1 and ns2 (ns0 + # needs to be able to determine route for to-be-forwarded packet). + ip netns exec ns0 sysctl -q net.ipv4.conf.veth0.forwarding=1 + ip netns exec ns0 sysctl -q net.ipv4.conf.veth1.forwarding=1 + + sleep 1 + + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (broute+forward)" 1>&2 + return 1 + fi + + echo "PASS: ns1/ns2 connectivity with active broute rule" + ip netns exec ns0 ebtables -t broute -F + + # ping netns1, expected to work (frames are bridged) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (bridged)" 1>&2 + return 1 + fi + + ip netns exec ns0 ebtables -t filter -A FORWARD -p ipv4 --ip-protocol icmp -j DROP + + # ping netns1, expected to not work (DROP in bridge forward) + ip netns exec ns1 ping -q -c 1 10.0.0.12 > /dev/null 2>&1 + if [ $? -eq 0 ]; then + echo "ERROR: ping works, should have failed (icmp forward drop)" 1>&2 + return 1 + fi + + # re-activate brouter + ip netns exec ns0 ebtables -t broute -A BROUTING -p ipv4 --ip-protocol icmp -j redirect --redirect-target=DROP + + ip netns exec ns2 ping -q -c 1 10.0.0.11 > /dev/null + if [ $? -ne 0 ]; then + echo "ERROR: ping did not work, but it should (broute+forward 2)" 1>&2 + return 1 + fi + + echo "PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop" + return 0 +} + +# test basic connectivity +ip netns exec ns1 ping -c 1 -q 10.0.0.12 > /dev/null +if [ $? -ne 0 ]; then + echo "ERROR: Could not reach ns2 from ns1" 1>&2 + ret=1 +fi + +ip netns exec ns2 ping -c 1 -q 10.0.0.11 > /dev/null +if [ $? -ne 0 ]; then + echo "ERROR: Could not reach ns1 from ns2" 1>&2 + ret=1 +fi + +if [ $ret -eq 0 ];then + echo "PASS: netns connectivity: ns1 and ns2 can reach each other" +fi + +test_ebtables_broute +ret=$? +for i in 0 1 2; do ip netns del ns$i;done + +exit $ret -- cgit v1.2.3-59-g8ed1b