Simtec Electronics EB2410ITX (BAST) =================================== http://www.simtec.co.uk/products/EB2410ITX/ Introduction ------------ The EB2410ITX is a S3C2410 based development board with a variety of peripherals and expansion connectors. This board is also known by the shortened name of Bast. Configuration ------------- To set the default configuration, use `make bast_defconfig` which supports the commonly used features of this board. Support ------- Official support information can be found on the Simtec Electronics website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ Useful links: - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html MTD --- The NAND and NOR support has been merged from the linux-mtd project. Any prolbems, see http://www.linux-mtd.infradead.org/ for more information or up-to-date versions of linux-mtd. IDE --- Both onboard IDE ports are supported, however there is no support for changing speed of devices, PIO Mode 4 capable drives should be used. Maintainers ----------- This board is maintained by Simtec Electronics. (c) 2004 Ben Dooks, Simtec Electronics