Synaptics SoC Device Tree Bindings According to https://www.synaptics.com/company/news/conexant-marvell Synaptics has acquired the Multimedia Solutions Business of Marvell, so berlin SoCs are now Synaptics' SoCs now. --------------------------------------------------------------- Work in progress statement: Device tree files and bindings applying to Marvell Berlin SoCs and boards are considered "unstable". Any Marvell Berlin device tree binding may change at any time. Be sure to use a device tree binary and a kernel image generated from the same source tree. Please refer to Documentation/devicetree/bindings/ABI.rst for a definition of a stable binding/ABI. --------------------------------------------------------------- Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: * Required root node properties: compatible: must contain "marvell,berlin" In addition, the above compatible shall be extended with the specific SoC and board used. Currently known SoC compatibles are: "marvell,berlin2" for Marvell Armada 1500 (BG2, 88DE3100), "marvell,berlin2cd" for Marvell Armada 1500-mini (BG2CD, 88DE3005) "marvell,berlin2ct" for Marvell Armada ? (BG2CT, 88DE????) "marvell,berlin2q" for Marvell Armada 1500-pro (BG2Q, 88DE3114) "marvell,berlin3" for Marvell Armada ? (BG3, 88DE????) * Example: / { model = "Sony NSZ-GS7"; compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; ... } * Marvell Berlin CPU control bindings CPU control register allows various operations on CPUs, like resetting them independently. Required properties: - compatible: should be "marvell,berlin-cpu-ctrl" - reg: address and length of the register set Example: cpu-ctrl@f7dd0000 { compatible = "marvell,berlin-cpu-ctrl"; reg = <0xf7dd0000 0x10000>; }; * Marvell Berlin2 chip control binding Marvell Berlin SoCs have a chip control register set providing several individual registers dealing with pinmux, padmux, clock, reset, and secondary CPU boot address. Unfortunately, the individual registers are spread among the chip control registers, so there should be a single DT node only providing the different functions which are described below. Required properties: - compatible: * the first and second values must be: "simple-mfd", "syscon" - reg: address and length of following register sets for BG2/BG2CD: chip control register set BG2Q: chip control register set and cpu pll registers * Marvell Berlin2 system control binding Marvell Berlin SoCs have a system control register set providing several individual registers dealing with pinmux, padmux, and reset. Required properties: - compatible: * the first and second values must be: "simple-mfd", "syscon" - reg: address and length of the system control register set Example: chip: chip-control@ea0000 { compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; /* sub-device nodes */ }; sysctrl: system-controller@d000 { compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; /* sub-device nodes */ };