Samsung S6E8AA0 AMOLED LCD 5.3 inch panel Required properties: - compatible: "samsung,s6e8aa0" - reg: the virtual channel number of a DSI peripheral - vdd3-supply: core voltage supply - vci-supply: voltage supply for analog circuits - reset-gpios: a GPIO spec for the reset pin - display-timings: timings for the connected panel as described by [1] Optional properties: - power-on-delay: delay after turning regulators on [ms] - reset-delay: delay after reset sequence [ms] - init-delay: delay after initialization sequence [ms] - panel-width-mm: physical panel width [mm] - panel-height-mm: physical panel height [mm] - flip-horizontal: boolean to flip image horizontally - flip-vertical: boolean to flip image vertically The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [2]. This node should describe panel's video bus. [1]: Documentation/devicetree/bindings/video/display-timing.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: panel { compatible = "samsung,s6e8aa0"; reg = <0>; vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; reset-gpios = <&gpy4 5 0>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; panel-width-mm = <58>; panel-height-mm = <103>; flip-horizontal; flip-vertical; display-timings { timing0: timing-0 { clock-frequency = <57153600>; hactive = <720>; vactive = <1280>; hfront-porch = <5>; hback-porch = <5>; hsync-len = <5>; vfront-porch = <13>; vback-porch = <1>; vsync-len = <2>; }; }; };