/* * linux/arch/arm/mach-sa1100/sa1111.c * * SA1111 support * * Original code by John Dorsey * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This file contains all generic SA1111 support. * * All initialization functions provided here are intended to be called * from machine specific code with proper arguments when required. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_ARCH_PXA #include #endif extern void __init sa1110_mb_enable(void); /* * We keep the following data for the overall SA1111. Note that the * struct device and struct resource are "fake"; they should be supplied * by the bus above us. However, in the interests of getting all SA1111 * drivers converted over to the device model, we provide this as an * anchor point for all the other drivers. */ struct sa1111 { struct device *dev; unsigned long phys; int irq; spinlock_t lock; void __iomem *base; }; /* * We _really_ need to eliminate this. Its only users * are the PWM and DMA checking code. */ static struct sa1111 *g_sa1111; struct sa1111_dev_info { unsigned long offset; unsigned long skpcr_mask; unsigned int devid; unsigned int irq[6]; }; static struct sa1111_dev_info sa1111_devices[] = { { .offset = SA1111_USB, .skpcr_mask = SKPCR_UCLKEN, .devid = SA1111_DEVID_USB, .irq = { IRQ_USBPWR, IRQ_HCIM, IRQ_HCIBUFFACC, IRQ_HCIRMTWKP, IRQ_NHCIMFCIR, IRQ_USB_PORT_RESUME }, }, { .offset = 0x0600, .skpcr_mask = SKPCR_I2SCLKEN | SKPCR_L3CLKEN, .devid = SA1111_DEVID_SAC, .irq = { AUDXMTDMADONEA, AUDXMTDMADONEB, AUDRCVDMADONEA, AUDRCVDMADONEB }, }, { .offset = 0x0800, .skpcr_mask = SKPCR_SCLKEN, .devid = SA1111_DEVID_SSP, }, { .offset = SA1111_KBD, .skpcr_mask = SKPCR_PTCLKEN, .devid = SA1111_DEVID_PS2, .irq = { IRQ_TPRXINT, IRQ_TPTXINT }, }, { .offset = SA1111_MSE, .skpcr_mask = SKPCR_PMCLKEN, .devid = SA1111_DEVID_PS2, .irq = { IRQ_MSRXINT, IRQ_MSTXINT }, }, { .offset = 0x1800, .skpcr_mask = 0, .devid = SA1111_DEVID_PCMCIA, .irq = { IRQ_S0_READY_NINT, IRQ_S0_CD_VALID, IRQ_S0_BVD1_STSCHG, IRQ_S1_READY_NINT, IRQ_S1_CD_VALID, IRQ_S1_BVD1_STSCHG, }, }, }; /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels * will call us again if there are more interrupts to process. */ static void sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) { unsigned int stat0, stat1, i; void __iomem *base = desc->data; stat0 = sa1111_readl(base + SA1111_INTSTATCLR0); stat1 = sa1111_readl(base + SA1111_INTSTATCLR1); sa1111_writel(stat0, base + SA1111_INTSTATCLR0); desc->chip->ack(irq); sa1111_writel(stat1, base + SA1111_INTSTATCLR1); if (stat0 == 0 && stat1 == 0) { do_bad_IRQ(irq, desc, regs); return; } for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1) if (stat0 & 1) do_edge_IRQ(i, irq_desc + i, regs); for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1) if (stat1 & 1) do_edge_IRQ(i, irq_desc + i, regs); /* For level-based interrupts */ desc->chip->unmask(irq); } #define SA1111_IRQMASK_LO(x) (1 << (x - IRQ_SA1111_START)) #define SA1111_IRQMASK_HI(x) (1 << (x - IRQ_SA1111_START - 32)) static void sa1111_ack_irq(unsigned int irq) { } static void sa1111_mask_lowirq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); ie0 &= ~SA1111_IRQMASK_LO(irq); writel(ie0, mapbase + SA1111_INTEN0); } static void sa1111_unmask_lowirq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ie0; ie0 = sa1111_readl(mapbase + SA1111_INTEN0); ie0 |= SA1111_IRQMASK_LO(irq); sa1111_writel(ie0, mapbase + SA1111_INTEN0); } /* * Attempt to re-trigger the interrupt. The SA1111 contains a register * (INTSET) which claims to do this. However, in practice no amount of * manipulation of INTEN and INTSET guarantees that the interrupt will * be triggered. In fact, its very difficult, if not impossible to get * INTSET to re-trigger the interrupt. */ static int sa1111_retrigger_lowirq(unsigned int irq) { unsigned int mask = SA1111_IRQMASK_LO(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ip0; int i; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); for (i = 0; i < 8; i++) { sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0); sa1111_writel(ip0, mapbase + SA1111_INTPOL0); if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) break; } if (i == 8) printk(KERN_ERR "Danger Will Robinson: failed to " "re-trigger IRQ%d\n", irq); return i == 8 ? -1 : 0; } static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) { unsigned int mask = SA1111_IRQMASK_LO(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ip0; if (flags == IRQT_PROBE) return 0; if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) return -EINVAL; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); if (flags & __IRQT_RISEDGE) ip0 &= ~mask; else ip0 |= mask; sa1111_writel(ip0, mapbase + SA1111_INTPOL0); sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0); return 0; } static int sa1111_wake_lowirq(unsigned int irq, unsigned int on) { unsigned int mask = SA1111_IRQMASK_LO(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long we0; we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); if (on) we0 |= mask; else we0 &= ~mask; sa1111_writel(we0, mapbase + SA1111_WAKEEN0); return 0; } static struct irqchip sa1111_low_chip = { .ack = sa1111_ack_irq, .mask = sa1111_mask_lowirq, .unmask = sa1111_unmask_lowirq, .retrigger = sa1111_retrigger_lowirq, .type = sa1111_type_lowirq, .wake = sa1111_wake_lowirq, }; static void sa1111_mask_highirq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); ie1 &= ~SA1111_IRQMASK_HI(irq); sa1111_writel(ie1, mapbase + SA1111_INTEN1); } static void sa1111_unmask_highirq(unsigned int irq) { void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ie1; ie1 = sa1111_readl(mapbase + SA1111_INTEN1); ie1 |= SA1111_IRQMASK_HI(irq); sa1111_writel(ie1, mapbase + SA1111_INTEN1); } /* * Attempt to re-trigger the interrupt. The SA1111 contains a register * (INTSET) which claims to do this. However, in practice no amount of * manipulation of INTEN and INTSET guarantees that the interrupt will * be triggered. In fact, its very difficult, if not impossible to get * INTSET to re-trigger the interrupt. */ static int sa1111_retrigger_highirq(unsigned int irq) { unsigned int mask = SA1111_IRQMASK_HI(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ip1; int i; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); for (i = 0; i < 8; i++) { sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1); sa1111_writel(ip1, mapbase + SA1111_INTPOL1); if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) break; } if (i == 8) printk(KERN_ERR "Danger Will Robinson: failed to " "re-trigger IRQ%d\n", irq); return i == 8 ? -1 : 0; } static int sa1111_type_highirq(unsigned int irq, unsigned int flags) { unsigned int mask = SA1111_IRQMASK_HI(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long ip1; if (flags == IRQT_PROBE) return 0; if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) return -EINVAL; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); if (flags & __IRQT_RISEDGE) ip1 &= ~mask; else ip1 |= mask; sa1111_writel(ip1, mapbase + SA1111_INTPOL1); sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1); return 0; } static int sa1111_wake_highirq(unsigned int irq, unsigned int on) { unsigned int mask = SA1111_IRQMASK_HI(irq); void __iomem *mapbase = get_irq_chipdata(irq); unsigned long we1; we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); if (on) we1 |= mask; else we1 &= ~mask; sa1111_writel(we1, mapbase + SA1111_WAKEEN1); return 0; } static struct irqchip sa1111_high_chip = { .ack = sa1111_ack_irq, .mask = sa1111_mask_highirq, .unmask = sa1111_unmask_highirq, .retrigger = sa1111_retrigger_highirq, .type = sa1111_type_highirq, .wake = sa1111_wake_highirq, }; static void sa1111_setup_irq(struct sa1111 *sachip) { void __iomem *irqbase = sachip->base + SA1111_INTC; unsigned int irq; /* * We're guaranteed that this region hasn't been taken. */ request_mem_region(sachip->phys + SA1111_INTC, 512, "irq"); /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); sa1111_writel(0, irqbase + SA1111_INTEN1); sa1111_writel(0, irqbase + SA1111_WAKEEN0); sa1111_writel(0, irqbase + SA1111_WAKEEN1); /* * detect on rising edge. Note: Feb 2001 Errata for SA1111 * specifies that S0ReadyInt and S1ReadyInt should be '1'. */ sa1111_writel(0, irqbase + SA1111_INTPOL0); sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), irqbase + SA1111_INTPOL1); /* clear all IRQs */ sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0); sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1); for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) { set_irq_chip(irq, &sa1111_low_chip); set_irq_chipdata(irq, irqbase); set_irq_handler(irq, do_edge_IRQ); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) { set_irq_chip(irq, &sa1111_high_chip); set_irq_chipdata(irq, irqbase); set_irq_handler(irq, do_edge_IRQ); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } /* * Register SA1111 interrupt */ set_irq_type(sachip->irq, IRQT_RISING); set_irq_data(sachip->irq, irqbase); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } /* * Bring the SA1111 out of reset. This requires a set procedure: * 1. nRESET asserted (by hardware) * 2. CLK turned on from SA1110 * 3. nRESET deasserted * 4. VCO turned on, PLL_BYPASS turned off * 5. Wait lock time, then assert RCLKEn * 7. PCR set to allow clocking of individual functions * * Until we've done this, the only registers we can access are: * SBI_SKCR * SBI_SMCR * SBI_SKID */ static void sa1111_wake(struct sa1111 *sachip) { unsigned long flags, r; spin_lock_irqsave(&sachip->lock, flags); #ifdef CONFIG_ARCH_SA1100 /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: * (SA-1110 Developer's Manual, section 9.1.2.1) */ GAFR |= GPIO_32_768kHz; GPDR |= GPIO_32_768kHz; TUCR = TUCR_3_6864MHz; #elif CONFIG_ARCH_PXA pxa_gpio_mode(GPIO11_3_6MHz_MD); #else #error missing clock setup #endif /* * Turn VCO on, and disable PLL Bypass. */ r = sa1111_readl(sachip->base + SA1111_SKCR); r &= ~SKCR_VCO_OFF; sa1111_writel(r, sachip->base + SA1111_SKCR); r |= SKCR_PLL_BYPASS | SKCR_OE_EN; sa1111_writel(r, sachip->base + SA1111_SKCR); /* * Wait lock time. SA1111 manual _doesn't_ * specify a figure for this! We choose 100us. */ udelay(100); /* * Enable RCLK. We also ensure that RDYEN is set. */ r |= SKCR_RCLKEN | SKCR_RDYEN; sa1111_writel(r, sachip->base + SA1111_SKCR); /* * Wait 14 RCLK cycles for the chip to finish coming out * of reset. (RCLK=24MHz). This is 590ns. */ udelay(1); /* * Ensure all clocks are initially off. */ sa1111_writel(0, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } #ifdef CONFIG_ARCH_SA1100 static u32 sa1111_dma_mask[] = { ~0, ~(1 << 20), ~(1 << 23), ~(1 << 24), ~(1 << 25), ~(1 << 20), ~(1 << 20), 0, }; /* * Configure the SA1111 shared memory controller. */ void sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, unsigned int cas_latency) { unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC); if (cas_latency == 3) smcr |= SMCR_CLAT; sa1111_writel(smcr, sachip->base + SA1111_SMCR); /* * Now clear the bits in the DMA mask to work around the SA1111 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion * Chip Specification Update, June 2000, Erratum #7). */ if (sachip->dev->dma_mask) *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2]; sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; } #endif static void sa1111_dev_release(struct device *_dev) { struct sa1111_dev *dev = SA1111_DEV(_dev); release_resource(&dev->res); kfree(dev); } static int sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, struct sa1111_dev_info *info) { struct sa1111_dev *dev; int ret; dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL); if (!dev) { ret = -ENOMEM; goto out; } memset(dev, 0, sizeof(struct sa1111_dev)); snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "%4.4lx", info->offset); dev->devid = info->devid; dev->dev.parent = sachip->dev; dev->dev.bus = &sa1111_bus_type; dev->dev.release = sa1111_dev_release; dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask; dev->res.start = sachip->phys + info->offset; dev->res.end = dev->res.start + 511; dev->res.name = dev->dev.bus_id; dev->res.flags = IORESOURCE_MEM; dev->mapbase = sachip->base + info->offset; dev->skpcr_mask = info->skpcr_mask; memmove(dev->irq, info->irq, sizeof(dev->irq)); ret = request_resource(parent, &dev->res); if (ret) { printk("SA1111: failed to allocate resource for %s\n", dev->res.name); kfree(dev); goto out; } ret = device_register(&dev->dev); if (ret) { release_resource(&dev->res); kfree(dev); goto out; } /* * If the parent device has a DMA mask associated with it, * propagate it down to the children. */ if (sachip->dev->dma_mask) { dev->dma_mask = *sachip->dev->dma_mask; dev->dev.dma_mask = &dev->dma_mask; if (dev->dma_mask != 0xffffffffUL) { ret = dmabounce_register_dev(&dev->dev, 1024, 4096); if (ret) { printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id); device_unregister(&dev->dev); } } } out: return ret; } /** * sa1111_probe - probe for a single SA1111 chip. * @phys_addr: physical address of device. * * Probe for a SA1111 chip. This must be called * before any other SA1111-specific code. * * Returns: * %-ENODEV device not found. * %-EBUSY physical address already marked in-use. * %0 successful. */ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) { struct sa1111 *sachip; unsigned long id; unsigned int has_devs, val; int i, ret = -ENODEV; sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; memset(sachip, 0, sizeof(struct sa1111)); spin_lock_init(&sachip->lock); sachip->dev = me; dev_set_drvdata(sachip->dev, sachip); sachip->phys = mem->start; sachip->irq = irq; /* * Map the whole region. This also maps the * registers for our children. */ sachip->base = ioremap(mem->start, PAGE_SIZE * 2); if (!sachip->base) { ret = -ENOMEM; goto out; } /* * Probe for the chip. Only touch the SBI registers. */ id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id); ret = -ENODEV; goto unmap; } printk(KERN_INFO "SA1111 Microprocessor Companion Chip: " "silicon revision %lx, metal revision %lx\n", (id & SKID_SIREV_MASK)>>4, (id & SKID_MTREV_MASK)); /* * We found it. Wake the chip up, and initialise. */ sa1111_wake(sachip); #ifdef CONFIG_ARCH_SA1100 /* * The SDRAM configuration of the SA1110 and the SA1111 must * match. This is very important to ensure that SA1111 accesses * don't corrupt the SDRAM. Note that this ungates the SA1111's * MBGNT signal, so we must have called sa1110_mb_disable() * beforehand. */ sa1111_configure_smc(sachip, 1, FExtr(MDCNFG, MDCNFG_SA1110_DRAC0), FExtr(MDCNFG, MDCNFG_SA1110_TDL0)); /* * We only need to turn on DCLK whenever we want to use the * DMA. It can otherwise be held firmly in the off position. * (currently, we always enable it.) */ val = sa1111_readl(sachip->base + SA1111_SKPCR); sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR); /* * Enable the SA1110 memory bus request and grant signals. */ sa1110_mb_enable(); #endif /* * The interrupt controller must be initialised before any * other device to ensure that the interrupts are available. */ if (sachip->irq != NO_IRQ) sa1111_setup_irq(sachip); g_sa1111 = sachip; has_devs = ~0; if (machine_is_assabet() || machine_is_jornada720() || machine_is_badge4()) has_devs &= ~(1 << 4); else has_devs &= ~(1 << 1); for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++) if (has_devs & (1 << i)) sa1111_init_one_child(sachip, mem, &sa1111_devices[i]); return 0; unmap: iounmap(sachip->base); out: kfree(sachip); return ret; } static int sa1111_remove_one(struct device *dev, void *data) { device_unregister(dev); return 0; } static void __sa1111_remove(struct sa1111 *sachip) { void __iomem *irqbase = sachip->base + SA1111_INTC; device_for_each_child(sachip->dev, NULL, sa1111_remove_one); /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); sa1111_writel(0, irqbase + SA1111_INTEN1); sa1111_writel(0, irqbase + SA1111_WAKEEN0); sa1111_writel(0, irqbase + SA1111_WAKEEN1); if (sachip->irq != NO_IRQ) { set_irq_chained_handler(sachip->irq, NULL); set_irq_data(sachip->irq, NULL); release_mem_region(sachip->phys + SA1111_INTC, 512); } iounmap(sachip->base); kfree(sachip); } /* * According to the "Intel StrongARM SA-1111 Microprocessor Companion * Chip Specification Update" (June 2000), erratum #7, there is a * significant bug in the SA1111 SDRAM shared memory controller. If * an access to a region of memory above 1MB relative to the bank base, * it is important that address bit 10 _NOT_ be asserted. Depending * on the configuration of the RAM, bit 10 may correspond to one * of several different (processor-relative) address bits. * * This routine only identifies whether or not a given DMA address * is susceptible to the bug. * * This should only get called for sa1111_device types due to the * way we configure our device dma_masks. */ int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) { /* * Section 4.6 of the "Intel StrongARM SA-1111 Development Module * User's Guide" mentions that jumpers R51 and R52 control the * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or * SDRAM bank 1 on Neponset). The default configuration selects * Assabet, so any address in bank 1 is necessarily invalid. */ return ((machine_is_assabet() || machine_is_pfs168()) && (addr >= 0xc8000000 || (addr + size) >= 0xc8000000)); } struct sa1111_save_data { unsigned int skcr; unsigned int skpcr; unsigned int skcdr; unsigned char skaud; unsigned char skpwm0; unsigned char skpwm1; /* * Interrupt controller */ unsigned int intpol0; unsigned int intpol1; unsigned int inten0; unsigned int inten1; unsigned int wakepol0; unsigned int wakepol1; unsigned int wakeen0; unsigned int wakeen1; }; #ifdef CONFIG_PM static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; void __iomem *base; if (level != SUSPEND_DISABLE) return 0; save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL); if (!save) return -ENOMEM; dev->power.saved_state = save; spin_lock_irqsave(&sachip->lock, flags); /* * Save state. */ base = sachip->base; save->skcr = sa1111_readl(base + SA1111_SKCR); save->skpcr = sa1111_readl(base + SA1111_SKPCR); save->skcdr = sa1111_readl(base + SA1111_SKCDR); save->skaud = sa1111_readl(base + SA1111_SKAUD); save->skpwm0 = sa1111_readl(base + SA1111_SKPWM0); save->skpwm1 = sa1111_readl(base + SA1111_SKPWM1); base = sachip->base + SA1111_INTC; save->intpol0 = sa1111_readl(base + SA1111_INTPOL0); save->intpol1 = sa1111_readl(base + SA1111_INTPOL1); save->inten0 = sa1111_readl(base + SA1111_INTEN0); save->inten1 = sa1111_readl(base + SA1111_INTEN1); save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0); save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1); save->wakeen0 = sa1111_readl(base + SA1111_WAKEEN0); save->wakeen1 = sa1111_readl(base + SA1111_WAKEEN1); /* * Disable. */ val = sa1111_readl(sachip->base + SA1111_SKCR); sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR); sa1111_writel(0, sachip->base + SA1111_SKPWM0); sa1111_writel(0, sachip->base + SA1111_SKPWM1); spin_unlock_irqrestore(&sachip->lock, flags); return 0; } /* * sa1111_resume - Restore the SA1111 device state. * @dev: device to restore * @level: resume level * * Restore the general state of the SA1111; clock control and * interrupt controller. Other parts of the SA1111 must be * restored by their respective drivers, and must be called * via LDM after this function. */ static int sa1111_resume(struct device *dev, u32 level) { struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; if (level != RESUME_ENABLE) return 0; save = (struct sa1111_save_data *)dev->power.saved_state; if (!save) return 0; spin_lock_irqsave(&sachip->lock, flags); /* * Ensure that the SA1111 is still here. * FIXME: shouldn't do this here. */ id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); dev_set_drvdata(dev, NULL); kfree(save); return 0; } /* * First of all, wake up the chip. */ sa1111_wake(sachip); sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0); sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1); base = sachip->base; sa1111_writel(save->skcr, base + SA1111_SKCR); sa1111_writel(save->skpcr, base + SA1111_SKPCR); sa1111_writel(save->skcdr, base + SA1111_SKCDR); sa1111_writel(save->skaud, base + SA1111_SKAUD); sa1111_writel(save->skpwm0, base + SA1111_SKPWM0); sa1111_writel(save->skpwm1, base + SA1111_SKPWM1); base = sachip->base + SA1111_INTC; sa1111_writel(save->intpol0, base + SA1111_INTPOL0); sa1111_writel(save->intpol1, base + SA1111_INTPOL1); sa1111_writel(save->inten0, base + SA1111_INTEN0); sa1111_writel(save->inten1, base + SA1111_INTEN1); sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0); sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1); sa1111_writel(save->wakeen0, base + SA1111_WAKEEN0); sa1111_writel(save->wakeen1, base + SA1111_WAKEEN1); spin_unlock_irqrestore(&sachip->lock, flags); dev->power.saved_state = NULL; kfree(save); return 0; } #else #define sa1111_suspend NULL #define sa1111_resume NULL #endif static int sa1111_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct resource *mem; int irq; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) return -EINVAL; irq = platform_get_irq(pdev, 0); return __sa1111_probe(dev, mem, irq); } static int sa1111_remove(struct device *dev) { struct sa1111 *sachip = dev_get_drvdata(dev); if (sachip) { __sa1111_remove(sachip); dev_set_drvdata(dev, NULL); #ifdef CONFIG_PM kfree(dev->power.saved_state); dev->power.saved_state = NULL; #endif } return 0; } /* * Not sure if this should be on the system bus or not yet. * We really want some way to register a system device at * the per-machine level, and then have this driver pick * up the registered devices. * * We also need to handle the SDRAM configuration for * PXA250/SA1110 machine classes. */ static struct device_driver sa1111_device_driver = { .name = "sa1111", .bus = &platform_bus_type, .probe = sa1111_probe, .remove = sa1111_remove, .suspend = sa1111_suspend, .resume = sa1111_resume, }; /* * Get the parent device driver (us) structure * from a child function device */ static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev) { return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent); } /* * The bits in the opdiv field are non-linear. */ static unsigned char opdiv_table[] = { 1, 4, 2, 8 }; static unsigned int __sa1111_pll_clock(struct sa1111 *sachip) { unsigned int skcdr, fbdiv, ipdiv, opdiv; skcdr = sa1111_readl(sachip->base + SA1111_SKCDR); fbdiv = (skcdr & 0x007f) + 2; ipdiv = ((skcdr & 0x0f80) >> 7) + 2; opdiv = opdiv_table[(skcdr & 0x3000) >> 12]; return 3686400 * fbdiv / (ipdiv * opdiv); } /** * sa1111_pll_clock - return the current PLL clock frequency. * @sadev: SA1111 function block * * BUG: we should look at SKCR. We also blindly believe that * the chip is being fed with the 3.6864MHz clock. * * Returns the PLL clock in Hz. */ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); return __sa1111_pll_clock(sachip); } /** * sa1111_select_audio_mode - select I2S or AC link mode * @sadev: SA1111 function block * @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S * * Frob the SKCR to select AC Link mode or I2S mode for * the audio block. */ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; spin_lock_irqsave(&sachip->lock, flags); val = sa1111_readl(sachip->base + SA1111_SKCR); if (mode == SA1111_AUDIO_I2S) { val &= ~SKCR_SELAC; } else { val |= SKCR_SELAC; } sa1111_writel(val, sachip->base + SA1111_SKCR); spin_unlock_irqrestore(&sachip->lock, flags); } /** * sa1111_set_audio_rate - set the audio sample rate * @sadev: SA1111 SAC function block * @rate: sample rate to select */ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned int div; if (sadev->devid != SA1111_DEVID_SAC) return -EINVAL; div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate; if (div == 0) div = 1; if (div > 128) div = 128; sa1111_writel(div - 1, sachip->base + SA1111_SKAUD); return 0; } /** * sa1111_get_audio_rate - get the audio sample rate * @sadev: SA1111 SAC function block device */ int sa1111_get_audio_rate(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long div; if (sadev->devid != SA1111_DEVID_SAC) return -EINVAL; div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1; return __sa1111_pll_clock(sachip) / (256 * div); } void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; void __iomem *gpio = sachip->base + SA1111_GPIO; #define MODIFY_BITS(port, mask, dir) \ if (mask) { \ val = sa1111_readl(port); \ val &= ~(mask); \ val |= (dir) & (mask); \ sa1111_writel(val, port); \ } spin_lock_irqsave(&sachip->lock, flags); MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir); MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8); MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16); MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir); MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8); MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; void __iomem *gpio = sachip->base + SA1111_GPIO; spin_lock_irqsave(&sachip->lock, flags); MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v); MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8); MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; void __iomem *gpio = sachip->base + SA1111_GPIO; spin_lock_irqsave(&sachip->lock, flags); MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v); MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8); MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16); spin_unlock_irqrestore(&sachip->lock, flags); } /* * Individual device operations. */ /** * sa1111_enable_device - enable an on-chip SA1111 function block * @sadev: SA1111 function block device to enable */ void sa1111_enable_device(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; spin_lock_irqsave(&sachip->lock, flags); val = sa1111_readl(sachip->base + SA1111_SKPCR); sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } /** * sa1111_disable_device - disable an on-chip SA1111 function block * @sadev: SA1111 function block device to disable */ void sa1111_disable_device(struct sa1111_dev *sadev) { struct sa1111 *sachip = sa1111_chip_driver(sadev); unsigned long flags; unsigned int val; spin_lock_irqsave(&sachip->lock, flags); val = sa1111_readl(sachip->base + SA1111_SKPCR); sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR); spin_unlock_irqrestore(&sachip->lock, flags); } /* * SA1111 "Register Access Bus." * * We model this as a regular bus type, and hang devices directly * off this. */ static int sa1111_match(struct device *_dev, struct device_driver *_drv) { struct sa1111_dev *dev = SA1111_DEV(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); return dev->devid == drv->devid; } static int sa1111_bus_suspend(struct device *dev, pm_message_t state) { struct sa1111_dev *sadev = SA1111_DEV(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; if (drv && drv->suspend) ret = drv->suspend(sadev, state); return ret; } static int sa1111_bus_resume(struct device *dev) { struct sa1111_dev *sadev = SA1111_DEV(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; if (drv && drv->resume) ret = drv->resume(sadev); return ret; } static int sa1111_bus_probe(struct device *dev) { struct sa1111_dev *sadev = SA1111_DEV(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = -ENODEV; if (drv->probe) ret = drv->probe(sadev); return ret; } static int sa1111_bus_remove(struct device *dev) { struct sa1111_dev *sadev = SA1111_DEV(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; if (drv->remove) ret = drv->remove(sadev); return ret; } struct bus_type sa1111_bus_type = { .name = "sa1111-rab", .match = sa1111_match, .suspend = sa1111_bus_suspend, .resume = sa1111_bus_resume, }; int sa1111_driver_register(struct sa1111_driver *driver) { driver->drv.probe = sa1111_bus_probe; driver->drv.remove = sa1111_bus_remove; driver->drv.bus = &sa1111_bus_type; return driver_register(&driver->drv); } void sa1111_driver_unregister(struct sa1111_driver *driver) { driver_unregister(&driver->drv); } static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); if (ret == 0) driver_register(&sa1111_device_driver); return ret; } static void __exit sa1111_exit(void) { driver_unregister(&sa1111_device_driver); bus_unregister(&sa1111_bus_type); } module_init(sa1111_init); module_exit(sa1111_exit); MODULE_DESCRIPTION("Intel Corporation SA1111 core driver"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(sa1111_select_audio_mode); EXPORT_SYMBOL(sa1111_set_audio_rate); EXPORT_SYMBOL(sa1111_get_audio_rate); EXPORT_SYMBOL(sa1111_set_io_dir); EXPORT_SYMBOL(sa1111_set_io); EXPORT_SYMBOL(sa1111_set_sleep_io); EXPORT_SYMBOL(sa1111_enable_device); EXPORT_SYMBOL(sa1111_disable_device); EXPORT_SYMBOL(sa1111_pll_clock); EXPORT_SYMBOL(sa1111_bus_type); EXPORT_SYMBOL(sa1111_driver_register); EXPORT_SYMBOL(sa1111_driver_unregister);