/* * Copyright (C) 2010,2011 Google, Inc. * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved. * * Author: * Colin Cross * Erik Gilling * Doug Anderson * Stephen Warren * * Portions based on mach-omap2's debug-macro.S * Copyright (C) 1994-1999 Russell King * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and * may be copied, distributed, and modified under those terms. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include #define UART_SHIFT 2 /* Physical addresses */ #define TEGRA_CLK_RESET_BASE 0x60006000 #define TEGRA_APB_MISC_BASE 0x70000000 #define TEGRA_UARTA_BASE 0x70006000 #define TEGRA_UARTB_BASE 0x70006040 #define TEGRA_UARTC_BASE 0x70006200 #define TEGRA_UARTD_BASE 0x70006300 #define TEGRA_UARTE_BASE 0x70006400 #define TEGRA_PMC_BASE 0x7000e400 #define TEGRA_CLK_RST_DEVICES_L (TEGRA_CLK_RESET_BASE + 0x04) #define TEGRA_CLK_RST_DEVICES_H (TEGRA_CLK_RESET_BASE + 0x08) #define TEGRA_CLK_RST_DEVICES_U (TEGRA_CLK_RESET_BASE + 0x0c) #define TEGRA_CLK_OUT_ENB_L (TEGRA_CLK_RESET_BASE + 0x10) #define TEGRA_CLK_OUT_ENB_H (TEGRA_CLK_RESET_BASE + 0x14) #define TEGRA_CLK_OUT_ENB_U (TEGRA_CLK_RESET_BASE + 0x18) #define TEGRA_PMC_SCRATCH20 (TEGRA_PMC_BASE + 0xa0) #define TEGRA_APB_MISC_GP_HIDREV (TEGRA_APB_MISC_BASE + 0x804) /* * Must be section-aligned since a section mapping is used early on. * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[]. */ #define UART_VIRTUAL_BASE 0xfe800000 #define checkuart(rp, rv, lhu, bit, uart) \ /* Load address of CLK_RST register */ \ ldr rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \ /* Load value from CLK_RST register */ \ ldr rp, [rp, #0] ; \ /* Test UART's reset bit */ \ tst rp, #(1 << bit) ; \ /* If set, can't use UART; jump to save no UART */ \ bne 90f ; \ /* Load address of CLK_OUT_ENB register */ \ ldr rp, =TEGRA_CLK_OUT_ENB_##lhu ; \ /* Load value from CLK_OUT_ENB register */ \ ldr rp, [rp, #0] ; \ /* Test UART's clock enable bit */ \ tst rp, #(1 << bit) ; \ /* If clear, can't use UART; jump to save no UART */ \ beq 90f ; \ /* Passed all tests, load address of UART registers */ \ ldr rp, =TEGRA_UART##uart##_BASE ; \ /* Jump to save UART address */ \ b 91f .macro addruart, rp, rv, tmp adr \rp, 99f @ actual addr of 99f ldr \rv, [\rp] @ linked addr is stored there sub \rv, \rv, \rp @ offset between the two ldr \rp, [\rp, #4] @ linked tegra_uart_config sub \tmp, \rp, \rv @ actual tegra_uart_config ldr \rp, [\tmp] @ Load tegra_uart_config cmp \rp, #1 @ needs initialization? bne 100f @ no; go load the addresses mov \rv, #0 @ yes; record init is done str \rv, [\tmp] #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA /* Check ODMDATA */ 10: ldr \rp, =TEGRA_PMC_SCRATCH20 ldr \rp, [\rp, #0] @ Load PMC_SCRATCH20 lsr \rv, \rp, #18 @ 19:18 are console type and \rv, \rv, #3 cmp \rv, #2 @ 2 and 3 mean DCC, UART beq 11f @ some boards swap the meaning cmp \rv, #3 @ so accept either bne 90f 11: lsr \rv, \rp, #15 @ 17:15 are UART ID and \rv, #7 cmp \rv, #0 @ UART 0? beq 20f cmp \rv, #1 @ UART 1? beq 21f cmp \rv, #2 @ UART 2? beq 22f cmp \rv, #3 @ UART 3? beq 23f cmp \rv, #4 @ UART 4? beq 24f b 90f @ invalid #endif #if defined(CONFIG_TEGRA_DEBUG_UARTA) || \ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) /* Check UART A validity */ 20: checkuart(\rp, \rv, L, 6, A) #endif #if defined(CONFIG_TEGRA_DEBUG_UARTB) || \ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) /* Check UART B validity */ 21: checkuart(\rp, \rv, L, 7, B) #endif #if defined(CONFIG_TEGRA_DEBUG_UARTC) || \ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) /* Check UART C validity */ 22: checkuart(\rp, \rv, H, 23, C) #endif #if defined(CONFIG_TEGRA_DEBUG_UARTD) || \ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) /* Check UART D validity */ 23: checkuart(\rp, \rv, U, 1, D) #endif #if defined(CONFIG_TEGRA_DEBUG_UARTE) || \ defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA) /* Check UART E validity */ 24: checkuart(\rp, \rv, U, 2, E) #endif /* No valid UART found */ 90: mov \rp, #0 /* fall through */ /* Record whichever UART we chose */ 91: str \rp, [\tmp, #4] @ Store in tegra_uart_phys cmp \rp, #0 @ Valid UART address? bne 92f @ Yes, go process it str \rp, [\tmp, #8] @ Store 0 in tegra_uart_virt b 100f @ Done 92: and \rv, \rp, #0xffffff @ offset within 1MB section add \rv, \rv, #UART_VIRTUAL_BASE str \rv, [\tmp, #8] @ Store in tegra_uart_virt b 100f .align 99: .word . .word tegra_uart_config .ltorg /* Load previously selected UART address */ 100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys ldr \rv, [\tmp, #8] @ Load tegra_uart_virt .endm /* * Code below is swiped from , but add an extra * check to make sure that the UART address is actually valid. */ .macro senduart, rd, rx cmp \rx, #0 strneb \rd, [\rx, #UART_TX << UART_SHIFT] 1001: .endm .macro busyuart, rd, rx cmp \rx, #0 beq 1002f 1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT] and \rd, \rd, #UART_LSR_THRE teq \rd, #UART_LSR_THRE bne 1001b 1002: .endm .macro waituart, rd, rx #ifdef FLOW_CONTROL cmp \rx, #0 beq 1002f 1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT] tst \rd, #UART_MSR_CTS beq 1001b 1002: #endif .endm /* * Storage for the state maintained by the macros above. * * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. * That's because this header is included from multiple files, and we only * want a single copy of the data. In particular, the UART probing code above * assumes it's running using physical addresses. This is true when this file * is included from head.o, but not when included from debug.o. So we need * to share the probe results between the two copies, rather than having * to re-run the probing again later. * * In the decompressor, we put the symbol/storage right here, since common.c * isn't included in the decompressor build. This symbol gets put in .text * even though it's really data, since .data is discarded from the * decompressor. Luckily, .text is writeable in the decompressor, unless * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. */ #if defined(ZIMAGE) tegra_uart_config: /* Debug UART initialization required */ .word 1 /* Debug UART physical address */ .word 0 /* Debug UART virtual address */ .word 0 #endif