/* * linux/arch/arm/mach-at91/board-csb337.c * * Copyright (C) 2005 SAN People * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" /* * Serial port configuration. * 0 .. 3 = USART0 .. USART3 * 4 = DBGU */ static struct at91_uart_config __initdata csb337_uart_config = { .console_tty = 0, /* ttyS0 */ .nr_tty = 2, .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ }; static void __init csb337_map_io(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Setup the serial ports and console */ at91_init_serial(&csb337_uart_config); } static void __init csb337_init_irq(void) { at91rm9200_init_interrupts(NULL); } static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, }; static struct at91_usbh_data __initdata csb337_usbh_data = { .ports = 2, }; static struct at91_udc_data __initdata csb337_udc_data = { // this has no VBUS sensing pin .pullup_pin = AT91_PIN_PA24, }; static struct i2c_board_info __initdata csb337_i2c_devices[] = { { I2C_BOARD_INFO("rtc-ds1307", 0x68), .type = "ds1307", }, }; static struct at91_cf_data __initdata csb337_cf_data = { /* * connector P4 on the CSB 337 mates to * connector P8 on the CSB 300CF */ /* CSB337 specific */ .det_pin = AT91_PIN_PC3, /* CSB300CF specific */ .irq_pin = AT91_PIN_PA19, .vcc_pin = AT91_PIN_PD0, .rst_pin = AT91_PIN_PD2, }; static struct at91_mmc_data __initdata csb337_mmc_data = { .det_pin = AT91_PIN_PD5, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PD6, }; static struct spi_board_info csb337_spi_devices[] = { { /* CAN controller */ .modalias = "sak82c900", .chip_select = 0, .max_speed_hz = 6 * 1000 * 1000, }, }; #define CSB_FLASH_BASE AT91_CHIPSELECT_0 #define CSB_FLASH_SIZE 0x800000 static struct mtd_partition csb_flash_partitions[] = { { .name = "uMON flash", .offset = 0, .size = MTDPART_SIZ_FULL, .mask_flags = MTD_WRITEABLE, /* read only */ } }; static struct physmap_flash_data csb_flash_data = { .width = 2, .parts = csb_flash_partitions, .nr_parts = ARRAY_SIZE(csb_flash_partitions), }; static struct resource csb_flash_resources[] = { { .start = CSB_FLASH_BASE, .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1, .flags = IORESOURCE_MEM, } }; static struct platform_device csb_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &csb_flash_data, }, .resource = csb_flash_resources, .num_resources = ARRAY_SIZE(csb_flash_resources), }; /* * GPIO Buttons (on CSB300) */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) static struct gpio_keys_button csb300_buttons[] = { { .gpio = AT91_PIN_PB29, .code = BTN_0, .desc = "sw0", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB28, .code = BTN_1, .desc = "sw1", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PA21, .code = BTN_2, .desc = "sw2", .active_low = 1, .wakeup = 1, } }; static struct gpio_keys_platform_data csb300_button_data = { .buttons = csb300_buttons, .nbuttons = ARRAY_SIZE(csb300_buttons), }; static struct platform_device csb300_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { .platform_data = &csb300_button_data, } }; static void __init csb300_add_device_buttons(void) { at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ at91_set_deglitch(AT91_PIN_PB29, 1); at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ at91_set_deglitch(AT91_PIN_PB28, 1); at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ at91_set_deglitch(AT91_PIN_PA21, 1); platform_device_register(&csb300_button_device); } #else static void __init csb300_add_device_buttons(void) {} #endif static struct gpio_led csb_leds[] = { { /* "led0", yellow */ .name = "led0", .gpio = AT91_PIN_PB2, .active_low = 1, .default_trigger = "heartbeat", }, { /* "led1", green */ .name = "led1", .gpio = AT91_PIN_PB1, .active_low = 1, .default_trigger = "mmc0", }, { /* "led2", yellow */ .name = "led2", .gpio = AT91_PIN_PB0, .active_low = 1, .default_trigger = "ide-disk", }, }; static void __init csb337_board_init(void) { /* Serial */ at91_add_device_serial(); /* Ethernet */ at91_add_device_eth(&csb337_eth_data); /* USB Host */ at91_add_device_usbh(&csb337_usbh_data); /* USB Device */ at91_add_device_udc(&csb337_udc_data); /* I2C */ at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices)); /* Compact Flash */ at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */ at91_add_device_cf(&csb337_cf_data); /* SPI */ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); /* LEDs */ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); /* Switches on CSB300 */ csb300_add_device_buttons(); } MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .phys_io = AT91_BASE_SYS, .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = csb337_map_io, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END