/* * arch/arm/mach-ep93xx/simone.c * Simplemachines Sim.One support. * * Copyright (C) 2010 Ryan Mallon * * Based on the 2.6.24.7 support: * Copyright (C) 2009 Simplemachines * MMC support by Peter Ivanov , 2007 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; static struct ep93xxfb_mach_info __initdata simone_fb_info = { .num_modes = EP93XXFB_USE_MODEDB, .bpp = 16, .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, .scl_pin = EP93XX_GPIO_LINE_EECLK, .scl_is_open_drain = 0, .udelay = 0, .timeout = 0, }; static struct i2c_board_info __initdata simone_i2c_board_info[] = { { I2C_BOARD_INFO("ds1337", 0x68), }, }; static void __init simone_init_machine(void) { ep93xx_init_devices(); ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") /* Maintainer: Ryan Mallon */ .phys_io = EP93XX_APB_PHYS_BASE, .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc, .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, .timer = &ep93xx_timer, .init_machine = simone_init_machine, MACHINE_END