/* * linux/arch/arm/mach-omap1/board-palmtt.c * * Modified from board-palmtt2.c * * Modified and amended for Palm Tungsten|T * by Marek Vasut * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int palmtt_keymap[] = { KEY(0, 0, KEY_ESC), KEY(0, 1, KEY_SPACE), KEY(0, 2, KEY_LEFTCTRL), KEY(0, 3, KEY_TAB), KEY(0, 4, KEY_ENTER), KEY(1, 0, KEY_LEFT), KEY(1, 1, KEY_DOWN), KEY(1, 2, KEY_UP), KEY(1, 3, KEY_RIGHT), KEY(2, 0, KEY_SLEEP), KEY(2, 4, KEY_Y), 0 }; static struct mtd_partition palmtt_partitions[] = { { .name = "write8k", .offset = 0, .size = SZ_8K, .mask_flags = 0, }, { .name = "PalmOS-BootLoader(ro)", .offset = SZ_8K, .size = 7 * SZ_8K, .mask_flags = MTD_WRITEABLE, }, { .name = "u-boot", .offset = MTDPART_OFS_APPEND, .size = 8 * SZ_8K, .mask_flags = 0, }, { .name = "PalmOS-FS(ro)", .offset = MTDPART_OFS_APPEND, .size = 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K, .mask_flags = MTD_WRITEABLE, }, { .name = "u-boot(rez)", .offset = MTDPART_OFS_APPEND, .size = SZ_128K, .mask_flags = 0 }, { .name = "empty", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0 } }; static struct flash_platform_data palmtt_flash_data = { .map_name = "cfi_probe", .width = 2, .parts = palmtt_partitions, .nr_parts = ARRAY_SIZE(palmtt_partitions), }; static struct resource palmtt_flash_resource = { .start = OMAP_CS0_PHYS, .end = OMAP_CS0_PHYS + SZ_8M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device palmtt_flash_device = { .name = "omapflash", .id = 0, .dev = { .platform_data = &palmtt_flash_data, }, .num_resources = 1, .resource = &palmtt_flash_resource, }; #define DEFAULT_BITPERSAMPLE 16 static struct omap_mcbsp_reg_cfg mcbsp_regs = { .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), .spcr1 = RINTM(3) | RRST, .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "PalmTT AIC23", .mcbsp_regs_alsa = &mcbsp_regs, .codec_configure_dev = NULL, // aic23_configure, .codec_set_samplerate = NULL, // aic23_set_samplerate, .codec_clock_setup = NULL, // aic23_clock_setup, .codec_clock_on = NULL, // aic23_clock_on, .codec_clock_off = NULL, // aic23_clock_off, .get_default_samplerate = NULL, // aic23_get_default_samplerate, }; static struct platform_device palmtt_mcbsp1_device = { .name = "omap_alsa_mcbsp", .id = 1, .dev = { .platform_data = &alsa_config, }, }; static struct resource palmtt_kp_resources[] = { [0] = { .start = INT_KEYBOARD, .end = INT_KEYBOARD, .flags = IORESOURCE_IRQ, }, }; static struct omap_kp_platform_data palmtt_kp_data = { .rows = 6, .cols = 3, .keymap = palmtt_keymap, }; static struct platform_device palmtt_kp_device = { .name = "omap-keypad", .id = -1, .dev = { .platform_data = &palmtt_kp_data, }, .num_resources = ARRAY_SIZE(palmtt_kp_resources), .resource = palmtt_kp_resources, }; static struct platform_device palmtt_lcd_device = { .name = "lcd_palmtt", .id = -1, }; static struct omap_irda_config palmtt_irda_config = { .transceiver_cap = IR_SIRMODE, .rx_channel = OMAP_DMA_UART3_RX, .tx_channel = OMAP_DMA_UART3_TX, .dest_start = UART3_THR, .src_start = UART3_RHR, .tx_trigger = 0, .rx_trigger = 0, }; static struct resource palmtt_irda_resources[] = { [0] = { .start = INT_UART3, .end = INT_UART3, .flags = IORESOURCE_IRQ, }, }; static struct platform_device palmtt_irda_device = { .name = "omapirda", .id = -1, .dev = { .platform_data = &palmtt_irda_config, }, .num_resources = ARRAY_SIZE(palmtt_irda_resources), .resource = palmtt_irda_resources, }; static struct platform_device palmtt_spi_device = { .name = "spi_palmtt", .id = -1, }; static struct omap_backlight_config palmtt_backlight_config = { .default_intensity = 0xa0, }; static struct platform_device palmtt_backlight_device = { .name = "omap-bl", .id = -1, .dev = { .platform_data= &palmtt_backlight_config, }, }; static struct omap_led_config palmtt_led_config[] = { { .cdev = { .name = "palmtt:led0", }, .gpio = PALMTT_LED_GPIO, }, }; static struct omap_led_platform_data palmtt_led_data = { .nr_leds = ARRAY_SIZE(palmtt_led_config), .leds = palmtt_led_config, }; static struct platform_device palmtt_led_device = { .name = "omap-led", .id = -1, .dev = { .platform_data = &palmtt_led_data, }, }; static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, &palmtt_mcbsp1_device, &palmtt_kp_device, &palmtt_lcd_device, &palmtt_irda_device, &palmtt_spi_device, &palmtt_backlight_device, &palmtt_led_device, }; static int palmtt_get_pendown_state(void) { return !omap_get_gpio_datain(6); } static const struct ads7846_platform_data palmtt_ts_info = { .model = 7846, .vref_delay_usecs = 100, /* internal, no capacitor */ .x_plate_ohms = 419, .y_plate_ohms = 486, .get_pendown_state = palmtt_get_pendown_state, }; static struct spi_board_info __initdata palmtt_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmtt_ts_info, .irq = OMAP_GPIO_IRQ(6), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, .chip_select = 0, } }; static void __init omap_palmtt_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); } static struct omap_usb_config palmtt_usb_config __initdata = { .register_dev = 1, .hmc_mode = 0, .pins[0] = 2, }; static struct omap_lcd_config palmtt_lcd_config __initdata = { .ctrl_name = "internal", }; static struct omap_uart_config palmtt_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; static struct omap_board_config_kernel palmtt_config[] = { { OMAP_TAG_USB, &palmtt_usb_config }, { OMAP_TAG_LCD, &palmtt_lcd_config }, { OMAP_TAG_UART, &palmtt_uart_config }, }; static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); else { omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); } } static void __init omap_palmtt_init(void) { omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; omap_board_config_size = ARRAY_SIZE(palmtt_config); platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); } static void __init omap_palmtt_map_io(void) { omap1_map_common_io(); } MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .phys_io = 0xfff00000, .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmtt_map_io, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, .timer = &omap_timer, MACHINE_END