/* * OMAP4 SMP source file. It contains platform specific functions * needed for the linux smp kernel. * * Copyright (C) 2009 Texas Instruments, Inc. * * Author: * Santosh Shilimkar * * Platform file needed for the OMAP4 SMP. This file is based on arm * realview smp platform. * * Copyright (c) 2002 ARM Limited. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include "omap-secure.h" #include "omap-wakeupgen.h" #include #include "soc.h" #include "iomap.h" #include "common.h" #include "clockdomain.h" #include "pm.h" #define CPU_MASK 0xff0ffff0 #define CPU_CORTEX_A9 0x410FC090 #define CPU_CORTEX_A15 0x410FC0F0 #define OMAP5_CORE_COUNT 0x2 /* SCU base address */ static void __iomem *scu_base; static DEFINE_SPINLOCK(boot_lock); void __iomem *omap4_get_scu_base(void) { return scu_base; } static void omap4_secondary_init(unsigned int cpu) { /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA * init and for CPU1, a secure PPA API provided. CPU0 must be ON * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. * OMAP443X GP devices- SMP bit isn't accessible. * OMAP446X GP devices - SMP bit access is enabled on both CPUs. */ if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, 4, 0, 0, 0, 0, 0); /* * Configure the CNTFRQ register for the secondary cpu's which * indicates the frequency of the cpu local timers. */ if (soc_is_omap54xx() || soc_is_dra7xx()) set_cntfreq(); /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); spin_unlock(&boot_lock); } static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; static struct powerdomain *cpu1_pwrdm; void __iomem *base = omap_get_wakeupgen_base(); /* * Set synchronisation state between this boot processor * and the secondary one */ spin_lock(&boot_lock); /* * Update the AuxCoreBoot0 with boot state for secondary core. * omap4_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) omap_modify_auxcoreboot0(0x200, 0xfffffdff); else __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm"); } /* * The SGI(Software Generated Interrupts) are not wakeup capable * from low power states. This is known limitation on OMAP4 and * needs to be worked around by using software forced clockdomain * wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to * software force wakeup. The clockdomain is then put back to * hardware supervised mode. * More details can be found in OMAP4430 TRM - Version J * Section : * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted && cpu1_pwrdm && cpu1_clkdm) { /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure * banked version is now composed of 2 bits: * bit 0 == Secure Enable * bit 1 == Non-Secure Enable * The Non-Secure banked register has not changed * Because the ROM Code is based on the r1pX GIC, the CPU1 * GIC restoration will cause a problem to CPU0 Non-Secure SW. * The workaround must be: * 1) Before doing the CPU1 wakeup, CPU0 must disable * the GIC distributor * 2) CPU1 must re-enable the GIC distributor on * it's wakeup path. */ if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { local_irq_disable(); gic_dist_disable(); } /* * Ensure that CPU power state is set to ON to avoid CPU * powerdomain transition on wfi */ clkdm_wakeup(cpu1_clkdm); omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { while (gic_dist_disabled()) { udelay(1); cpu_relax(); } gic_timer_retrigger(); local_irq_enable(); } } else { dsb_sev(); booted = true; } arch_send_wakeup_ipi_mask(cpumask_of(cpu)); /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); return 0; } /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ static void __init omap4_smp_init_cpus(void) { unsigned int i = 0, ncores = 1, cpu_id; /* Use ARM cpuid check here, as SoC detection will not work so early */ cpu_id = read_cpuid_id() & CPU_MASK; if (cpu_id == CPU_CORTEX_A9) { /* * Currently we can't call ioremap here because * SoC detection won't work until after init_early. */ scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base()); BUG_ON(!scu_base); ncores = scu_get_core_count(scu_base); } else if (cpu_id == CPU_CORTEX_A15) { ncores = OMAP5_CORE_COUNT; } /* sanity check */ if (ncores > nr_cpu_ids) { pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", ncores, nr_cpu_ids); ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) set_cpu_possible(i, true); } static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { void *startup_addr = omap4_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); /* * Initialise the SCU and wake up the secondary core using * wakeup_secondary(). */ if (scu_base) scu_enable(scu_base); if (cpu_is_omap446x()) startup_addr = omap4460_secondary_startup; /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else __raw_writel(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); } struct smp_operations omap4_smp_ops __initdata = { .smp_init_cpus = omap4_smp_init_cpus, .smp_prepare_cpus = omap4_smp_prepare_cpus, .smp_secondary_init = omap4_secondary_init, .smp_boot_secondary = omap4_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = omap4_cpu_die, #endif };