/* * arch/arm/mach-orion5x/rd88f5182-setup.c * * Marvell Orion-NAS Reference Design Setup * * Maintainer: Ronen Shitrit * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" /***************************************************************************** * RD-88F5182 Info ****************************************************************************/ /* * 512K NOR flash Device bus boot chip select */ #define RD88F5182_NOR_BOOT_BASE 0xf4000000 #define RD88F5182_NOR_BOOT_SIZE SZ_512K /* * 16M NOR flash on Device bus chip select 1 */ #define RD88F5182_NOR_BASE 0xfc000000 #define RD88F5182_NOR_SIZE SZ_16M /* * PCI */ #define RD88F5182_PCI_SLOT0_OFFS 7 #define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 #define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 /* * GPIO Debug LED */ #define RD88F5182_GPIO_DBG_LED 0 /***************************************************************************** * 16M NOR Flash on Device bus CS1 ****************************************************************************/ static struct physmap_flash_data rd88f5182_nor_flash_data = { .width = 1, }; static struct resource rd88f5182_nor_flash_resource = { .flags = IORESOURCE_MEM, .start = RD88F5182_NOR_BASE, .end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1, }; static struct platform_device rd88f5182_nor_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &rd88f5182_nor_flash_data, }, .num_resources = 1, .resource = &rd88f5182_nor_flash_resource, }; #ifdef CONFIG_LEDS /***************************************************************************** * Use GPIO debug led as CPU active indication ****************************************************************************/ static void rd88f5182_dbgled_event(led_event_t evt) { int val; if (evt == led_idle_end) val = 1; else if (evt == led_idle_start) val = 0; else return; gpio_set_value(RD88F5182_GPIO_DBG_LED, val); } static int __init rd88f5182_dbgled_init(void) { int pin; if (machine_is_rd88f5182()) { pin = RD88F5182_GPIO_DBG_LED; if (gpio_request(pin, "DBGLED") == 0) { if (gpio_direction_output(pin, 0) != 0) { printk(KERN_ERR "rd88f5182_dbgled_init failed " "to set output pin %d\n", pin); gpio_free(pin); return 0; } } else { printk(KERN_ERR "rd88f5182_dbgled_init failed " "to request gpio %d\n", pin); return 0; } leds_event = rd88f5182_dbgled_event; } return 0; } __initcall(rd88f5182_dbgled_init); #endif /***************************************************************************** * PCI ****************************************************************************/ void __init rd88f5182_pci_preinit(void) { int pin; /* * Configure PCI GPIO IRQ pins */ pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { set_irq_type(gpio_to_irq(pin), IRQT_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); gpio_free(pin); } } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); } pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { set_irq_type(gpio_to_irq(pin), IRQT_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); gpio_free(pin); } } else { printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); } } static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { /* * PCI-E isn't used on the RD2 */ if (dev->bus->number == orion5x_pcie_local_bus_nr()) return IRQ_ORION5X_PCIE0_INT; /* * PCI IRQs are connected via GPIOs */ switch (slot - RD88F5182_PCI_SLOT0_OFFS) { case 0: if (pin == 1) return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); else return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); default: return -1; } } static struct hw_pci rd88f5182_pci __initdata = { .nr_controllers = 2, .preinit = rd88f5182_pci_preinit, .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5182_pci_map_irq, }; static int __init rd88f5182_pci_init(void) { if (machine_is_rd88f5182()) pci_common_init(&rd88f5182_pci); return 0; } subsys_initcall(rd88f5182_pci_init); /***************************************************************************** * Ethernet ****************************************************************************/ static struct mv643xx_eth_platform_data rd88f5182_eth_data = { .phy_addr = 8, .force_phy_addr = 1, }; /***************************************************************************** * RTC DS1338 on I2C bus ****************************************************************************/ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { .driver_name = "rtc-ds1307", .type = "ds1338", .addr = 0x68, }; /***************************************************************************** * Sata ****************************************************************************/ static struct mv_sata_platform_data rd88f5182_sata_data = { .n_ports = 2, }; /***************************************************************************** * General Setup ****************************************************************************/ static struct platform_device *rd88f5182_devices[] __initdata = { &rd88f5182_nor_flash, }; static void __init rd88f5182_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); /* * Setup the CPU address decode windows for our devices */ orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, RD88F5182_NOR_BOOT_SIZE); orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE); /* * Open a special address decode windows for the PCIE WA. */ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE, ORION5X_PCIE_WA_SIZE); /* * Setup Multiplexing Pins -- * MPP[0] Debug Led (GPIO - Out) * MPP[1] Debug Led (GPIO - Out) * MPP[2] N/A * MPP[3] RTC_Int (GPIO - In) * MPP[4] GPIO * MPP[5] GPIO * MPP[6] PCI_intA (GPIO - In) * MPP[7] PCI_intB (GPIO - In) * MPP[8-11] N/A * MPP[12] SATA 0 presence Indication * MPP[13] SATA 1 presence Indication * MPP[14] SATA 0 active Indication * MPP[15] SATA 1 active indication * MPP[16-19] Not used * MPP[20] PCI Clock to MV88F5182 * MPP[21] PCI Clock to mini PCI CON11 * MPP[22] USB 0 over current indication * MPP[23] USB 1 over current indication * MPP[24] USB 1 over current enable * MPP[25] USB 0 over current enable */ orion5x_write(MPP_0_7_CTRL, 0x00000003); orion5x_write(MPP_8_15_CTRL, 0x55550000); orion5x_write(MPP_16_19_CTRL, 0x5555); orion5x_gpio_set_valid_pins(0x000000fb); platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); orion5x_eth_init(&rd88f5182_eth_data); orion5x_sata_init(&rd88f5182_sata_data); } MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit */ .phys_io = ORION5X_REGS_PHYS_BASE, .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, .map_io = orion5x_map_io, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, MACHINE_END