/* * linux/arch/arm/mach-pxa/colibri.c * * Support for Toradex PXA27x based Colibri module * Daniel Mack * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" #include "devices.h" /* * Flash */ static struct mtd_partition colibri_partitions[] = { { .name = "Bootloader", .offset = 0x00000000, .size = 0x00040000, .mask_flags = MTD_WRITEABLE /* force read-only */ }, { .name = "Kernel", .offset = 0x00040000, .size = 0x00400000, .mask_flags = 0 }, { .name = "Rootfs", .offset = 0x00440000, .size = MTDPART_SIZ_FULL, .mask_flags = 0 } }; static struct physmap_flash_data colibri_flash_data[] = { { .width = 4, /* bankwidth in bytes */ .parts = colibri_partitions, .nr_parts = ARRAY_SIZE(colibri_partitions) } }; static struct resource flash_resource = { .start = PXA_CS0_PHYS, .end = PXA_CS0_PHYS + SZ_32M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device flash_device = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = colibri_flash_data, }, .resource = &flash_resource, .num_resources = 1, }; /* * DM9000 Ethernet */ static struct resource dm9000_resources[] = { [0] = { .start = COLIBRI_ETH_PHYS, .end = COLIBRI_ETH_PHYS + 3, .flags = IORESOURCE_MEM, }, [1] = { .start = COLIBRI_ETH_PHYS + 4, .end = COLIBRI_ETH_PHYS + 4 + 500, .flags = IORESOURCE_MEM, }, [2] = { .start = COLIBRI_ETH_IRQ, .end = COLIBRI_ETH_IRQ, .flags = IORESOURCE_IRQ, }, }; static struct platform_device dm9000_device = { .name = "dm9000", .id = -1, .num_resources = ARRAY_SIZE(dm9000_resources), .resource = dm9000_resources, }; static struct platform_device *colibri_devices[] __initdata = { &flash_device, &dm9000_device, }; static void __init colibri_init(void) { /* DM9000 LAN */ pxa_gpio_mode(GPIO78_nCS_2_MD); pxa_gpio_mode(GPIO_DM9000 | GPIO_IN); set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING); platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices)); } MACHINE_START(COLIBRI, "Toradex Colibri PXA27x") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = COLIBRI_SDRAM_BASE + 0x100, .init_machine = colibri_init, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, MACHINE_END